Adhesives & Sealants Industry October 2011

October 2011 • Volume 18, Issue 10 • www.adhesivesmag.com

❯ Coatings ❯ Testing/Quality Control

Scan the mobile tag for direct access to all of ASI’s content online! Get the free mobile app at http://gettag.mobi

Expand the Possibilities with RHOPLEX™ 4400 RHOPLEX™ 4400 acrylic polymer can help you develop plasticizer-free caulk and sealant formulations, which result in products with reduced dirt pickup, glossing, mildew growth and paint discoloration. This novel polymer also helps provide excellent exterior durability and good adhesion to a variety of construction substrates. RHOPLEX 4400 can even help reduce formulation costs by eliminating plasticizer or increasing P/B.

t
Plasticizer-free t
APEO-free, St-free, AN-free

Looking for enhanced aesthetics, excellent weatherization capabilities and a wide formulation space for your caulks and sealants? Start Here.

DowConstructionChemicals.com

®

™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow

t
Ultra-low formaldehyde t
Can be formulated into CARB-compliant or low-VOC formulations

796;,*;05..,50<: Connolly Bove attorneys understand your technology and how IP relates to your big picture needs.

It’s like we’re in your head. www.cblh.com

INNOVATION = VALUE COATINGS: Go ‘green’ with innovative binder and additive technologies.

ADHESIVES & SEALANTS:

Conserve energy in production and product use.

ELASTOMERS:

Formulate with alternative raw materials, and do it competitively.

YOUR CUSTOMERS DEMAND ENVIRONMENTALLY-FRIENDLY PRODUCTS. LET UNIVAR SHOW YOU HOW YOU CAN GO GREEN. Univar supplies the CASE industry with much more than a comprehensive line of sustainable ingredients — we can provide you with an innovative approach to your green formulation challenges, offering you technical expertise from concept to production. Consider Univar your partner in sustainable product development. We connect you to the latest materials and technologies, and help you bring environmentally-friendly products to market. Innovation, sustainability, expertise — it all adds up to value.

INNOVATION > TECHNICAL EXPERTISE > MARKETING > SALES > LOGISTICS > DISTRIBUTION

1.877.203.0045 | [email protected] www.univarcorp.com

IN THIS ISSUE ADHESIVES & SEALANTS INDUSTRY, VOLUME 18, NUMBER 10

14

16

DEPARTMENTS

MAPEI PARTICIPATES IN AEC CARES PROJECT IN NEW ORLEANS

6

Editor’s Memo

MAPEI joined a unified AEC Cares team that worked to restore parts of New Orleans, LA.

8

Company News

11

People

13

Calendar

37

Case Study

39

Advancing Adhesives

40

What’s New

42

Product and Literature Showcase

43

Services Marketplace

45

Classifieds

46

Ask Dr. Dave

46

Ad Index

THE ROLE OF ADHESIVES AND SEALANTS IN THE BRICS ECONOMIC PLAN Is the BRICS alliance an opportunity for the adhesives and sealants industry to grow and become a hedge against global economic downward trends?

18 19

AWARD-WINNING GLOBAL BRANDS More than 270 participants from 43 countries created works that showcased their creative skills and vision.

20

NORDSON ACQUIRES FLEXIBLE PACKAGING EQUIPMENT MANUFACTURER VERBRUGGEN The company will operate as part of Nordson’s Adhesive Dispensing Systems segment.

20 24 26 28 29 30 33

INCREASING PACKAGING SPEEDS Flexible packaging companies are increasingly feeling the pressure to reduce costs in order to remain competitive.

IMPROVING POLYMER CHEMISTRIES With careful research, polymer chemistries can be tailored to end-use applications.

MAJOR MILESTONE Kraton Performance Polymers manufacturing plant celebrates 50 years of innovation. October 2011 • Volume 18, Issue 10 • www.adhesivesmag.com

LORD PROVIDES HIGH-PERFORMANCE COATING TO PETROBRAS HPC-5C can protect offshore platforms’ rubber parts from ozone attack. ❯ Coatings ❯ Testing/Quality Control

SHERWIN-WILLIAMS RELEASES FDA-COMPLIANT COATING Magnalux™ 304 FF is a flake-filled vinyl ester for dry and liquid storage.

RHEOLOGY SOLUTIONS FOR ADHESIVES TESTING When testing adhesive materials, dual capability is vital to the range of necessary rheological tests.

PASSING THE TORCH Tape industry icon John Johnston looks to the future.

Cover 2.indd 1

9/19/11 12:56 PM

ON THE COVER: Cover photo licensed to Avery Dennison, Brand Experience Contest, Contrast Design & Photographic Studio, Tan Branding, The Saltmine, Pixology Designs.

FOR SUBSCRIPTION INFORMATION OR QUESTIONS, CONTACT: Customer Service: (847) 763-9534 ADHESIVES & SEALANTS INDUSTRY (ISSN 1070-9592) is published 12 times annually, monthly, by BNP Media, 2401 W. Big Beaver Rd., Suite 700, Troy, MI 48084-3333. Telephone: (248) 362-3700, Fax: (248) 362-0317. No charge for subscriptions to qualified individuals. Annual rate for subscriptions to nonqualified individuals in the U.S.A.: $178.00 USD. Annual rate for subscriptions to nonqualified individuals in Canada: $216.00 USD (includes GST & postage); all other countries: $228.00 (Int’l mail) payable in U.S. funds. Printed in the U.S.A. Copyright 2011, by BNP Media. All rights reserved. The contents of this publication may not be reproduced in whole or in part without the consent of the publisher. The publisher is not responsible for product claims and representations. Periodicals Postage Paid at Troy, MI and at additional mailing offices. POSTMASTER: Send address changes to: ADHESIVES & SEALANTS INDUSTRY, P.O. Box 2148, Skokie, IL 60076. Canada Post: Publications Mail Agreement #40612608. GST account: 131263923. Send returns (Canada) to Pitney Bowes, P.O. Box 25542, London, ON, N6C 6B2. Change of address: Send old address label along with new address to ADHESIVES & SEALANTS INDUSTRY, P.O. Box 2148, Skokie, IL 60076. For single copies or back issues: contact Ann Kalb at (248) 244-6499 or [email protected].

October 2011

Adhesives & Sealants Industry

Audited by BPA Worldwide.

|

5

®

EDITOR'S MEMO www.adhesivesmag.com

FALL POTPOURRI

6075 B Glick Rd., Powell, OH 43065 • 281-550-5855

PUBLISHING STAFF Autumn is one of my favorite seasons. Mums of all shapes and sizes are blooming, the leaves are turning the most amazingly vibrant colors, and everyone’s digging out their cold-weather clothes. It seems like every day brings something new and interesting. We’ve put together an exciting fall potpourri of editorial for you in this issue of ASI. For example, David Nick, president and CEO of DPNA International, Inc., explores “The Role of Adhesives and Sealants in the BRICS Alliance.” Despite the worldwide economic downturn, the countries in the alliance—Brazil, Russia, India, China and South Africa—are prospering and offer a number of opportunities for adhesives and sealants manufacturers. Discover the potential possibilities on pp. 16-17. The selection of the proper adhesive(s) for flexible packaging applications is vital. The flexible packaging industry is growing, and adhesives manufacturers can help the sector meet the increasing demand. According to Bonnie Richter, Splicing Business Unit manager for Adhesives Research, Inc., “Adhesive manufacturers can add significant value to products by understanding the specialized needs of this market and guiding flexible packaging manufacturers and converters in their adhesive selection process.” Turn to “Increasing Packaging Speeds” (pp. 20-23) to learn more. We also offer information on testing/quality control in this issue, with articles on rheological tests (“Rheology Solutions,” pp. 30-32) and industry icon John Johnston’s impact on the testing and development of pressure-sensitive adhesives (“Passing the Torch,” pp. 33-36). Be sure to take a look at the issue’s full Table of Contents on p. 5, or simply scan the mobile tag on the cover for direct access to all of our content online.

John Schrei, Publishing Director — 248-786-1637, [email protected] Tom Esposito, Senior Group Publisher — 610-436-4220, [email protected] Amy Vallance, Publisher — 281-550-5855, [email protected] Susan Sutton, Editor-in-Chief, Integrated Media — 330-336-4098, [email protected] Teresa McPherson, Managing Editor — 734-332-0541, [email protected] Kelsey Seidler, Associate Editor — 614-789-1881, [email protected] Lindsay Leusby, Art Director — 248-244-1735, [email protected] Kelly Southard, Production Manager — 248-244-6409, [email protected]

SALES STAFF Amy Vallance, Sales Representative Midwest, West and Southwest U.S., and Western Canada 281-550-5855, [email protected] Brandon Miller, East Coast Sales Manager Eastern U.S. and Canada, Latin America 610-436-4220 x8513, [email protected] Patrick Connolly, Sales Representative, Europe Patco Media-London, 99 Kings Road, Westcliff on Sea, Essex SSO 8PH, England 44-1702-477341, FAX 44-1702-477559, [email protected] Peg Van Winkle, Inside Sales 614-760-4222, [email protected] Christopher Wilson, BNP Custom Media Group 248-244-8264, [email protected] Kevin Collopy, Postal List Rental Manager 800-223-2194 x684, [email protected] Michael Costantino, Email List Rental Account Manager 800-223-2194 x748, [email protected]

CONTRIBUTING EDITORS Dave Dunn, bms North America Dan Murad, The ChemQuest Group Inc. David P. Nick, DPNA International Inc.

EDITORIAL ADVISORY BOARD

Susan Sutton is Editor-in-Chief, Integrated Media for Adhesives & Sealants Industry and Ceramic Industry magazines. If you wish to send a letter to the editor, please email [email protected]. Letters must include the sender’s address, phone number and email address, when possible. Letters may be edited for space and clarity.

THIS MONTH ON www.adhesivesmag.com... Adhesives in the News Discover some of the latest applications and opportunities for adhesives and sealants around the world. Green Opportunities Don’t miss the next installment of our quarterly Green Opportunities e-newsletter. Sign up for your free subscription at www. adhesivesmag.com! Digital Edition ASI’s digital editions are easy to read, search and download. Site visitors can also subscribe and access the archives to view past digital editions.

Steven Gailbreath, Arizona Chemical Richard P. Muny, Chemsultants International Network Larry Owen, Franklin International Lex Reynolds, Reynolds Glue Deborah Chrzanowski, Intertape Polymer Group and PSTC Technical Steering Committee Chair

AUDIENCE DEVELOPMENT Terry Owens, Corporate Audience Development Manager Kelly Carlson, Multimedia Specialist Carolyn M. Alexander, Audience Audit Coordinator For subscription information or service, please contact Customer Service at: Tel. (847) 763-9534 or Fax (847) 763-9538 or email [email protected]

CORPORATE DIRECTORS Publishing: John R. Schrei Corporate Strategy: Rita M. Foumia Marketing: Ariane Claire Production: Vincent M. Miconi Finance: Lisa L. Paulus

Creative: Michael T. Powell Directories: Nikki Smith Human Resources: Marlene J. Witthoft Information Technology: Scott Krywko Clear Seas Research: Beth A. Surowiec

BNP Media Helps People Succeed in Business with Superior Information

6

|

www.adhesivesmag.com

October 2011

CREATING TOMORROW’S SOLUTIONS

MAKE THE MOVE TO GREATER COST-EFFICIENCY

VINNAPAS® EP 1400 enables you to formulate adhesives that are more eco-friendly and offer superior wet tack, setting speeds, adhesion and water resistance. You can reduce your costs by replacing many additives and eliminating production steps. Move up to VAE grades and bring your inventory and production costs down. Find out more at www.wacker.com/move

COMPANY NEWS ASHLAND recently announced it has completed its acquisition of privately owned International Specialty Products Inc. (ISP), a global specialty chemical manufacturer of innovative functional ingredients and technologies. The purchase was an all-cash transaction for $3.2 billion, subject to post-closing adjustments for changes in net working capital and certain other items. ISP will be integrated into the Ashland Aqualon Functional Ingredients commercial unit, more than doubling the size of Ashland’s highest margin business. The combined unit will be called Ashland Specialty Ingredients. For more information, visit www.ashland.com. BASF announced plans to invest in a world-scale production site for acrylic acid, butyl acrylate and superabsorbent polymers (SAP) in Camaçari, Bahia, Brazil. According to the company, this will be the first acrylic acid and superabsorbents plant in South America. With an investment volume of more than @500 million (~ $721 million), it is the largest investment in BASF’s century-long history in South America. In addition, BASF will begin producing 2-ethyl-hexyl acrylate, a raw material for the adhesives and special coatings industries, in its existing chemical complex in Guaratinguetá, São Paulo. This will be the first plant for this product in South America. Visit www.basf. com for additional information. BROOKFIELD recently announced it offers two hands-on courses that can help users of its instruments to get the most out of their viscosity test methods. These one-day training sessions can be scheduled to take place at Brookfield’s Middleboro, MA, headquarters and at major metropolitan areas across the U.S. Courses can also be conducted at customers’ facilities, where content can be adapted to specific product applications. For more information, call (800) 628-8139 or (508) 946-6200, or visit www.brookfieldengineering.com/services/educational-programs. DOW AUTOMOTIVE SYSTEMS recently announced plans to move its aftermarket distribution center from Dayton, OH, to Hillsdale, MI, beginning in the 8

|

www.adhesivesmag.com

ANNOUNCEMENT WORLD ADHESIVE CONFERENCE SEEKS PAPERS FEICA, the Association of the European Adhesive and Sealant Industry, has announced a call for papers for the World Adhesive & Sealant Conference (WAC), which will take place Sept. 18-21, 2012, in Paris. The conference is held every four years, alternating between Asia, the Americas and Europe. The upcoming conference’s theme is “Creating the Future.” The objectives are to address key industry challenges, to provide multi-perspective solutions and promote discussion among all the stakeholders, and to strive for both the development and progress of the global adhesives and sealants industry. The conference program is structured into four half-day sessions; each session has four parallel tracks of four speakers (30 minutes each). A total of 64 papers will be presented. The deadline for submitting a paper is Nov. 30. Additional details are available at www.wac2012.org.

ANNOUNCEMENT FLEXCON ADVANCES BIOMIMETIC TECHNOLOGY FLEXcon recently announced that it is successfully supporting biomimetic technologies in partnership with Sharklet Technologies. The collaboration has allowed Sharklet Technologies to create the world’s first technology that inhibits bacterial growth through a chemical-free micro-texture. The surface protection product will be used in environments where bacteria pose a health risk. Sharklet Technologies’ core technology, Sharklet™, is inspired by the microbe-resistant properties of sharkskin and is the first no-kill, non-toxic and environmentally friendly surface designed to inhibit bacterial growth. Sharklet Technologies reportedly selected FLEXcon because the film specialist proved to be the only manufacturer that could successfully image the patented, microscopic texture on film in large production rolls. Sharklet Technologies’ film-based surface protection products can be applied to germ-prone surfaces to reduce the presence of bacteria. These films can be converted into adhesive-backed “skins” for application to high-touch, bacteria-prone areas such as hospital surfaces, public restrooms, childcare facilities, commercial venues, laboratories and animal research facilities. The film may also be manufactured into the top layer of workspace mats to create immediate and moveable surface protection. For more information, visit www.flexcon.com or www.sharklet.com.

fourth quarter. Hillsdale is the site for the Dow business unit’s small packaging operation. Visit www.dowautomotive. com for more information. THE DOW CHEMICAL CO. recently announced plans to add capacity for its ENLIGHT™ polyolefin encapsulant films by building two new manufacturing plants in 2012. The new plants, located in Map Ta Phut, Thailand, and Schkopau, Germany, will reportedly more than triple the company’s capacity for making specialty films used in photovoltaic modules, and will significantly expand the company’s ability to supply encapsulant films worldwide. For more information, visit www.dow.com.

The Performance Monomers business of THE DOW CHEMICAL CO. has

announced a 10% increase in capacity for the production of glycidyl methacrylate (GMA) at its Freeport, Texas, facility. The capacity increase is due to a successful debottlenecking initiative that addresses Dow’s need to increase GMA capacity for its strategic customers. Key drivers for this effort include improving process and mechanical reliability. For additional details, visit www.dow.com. EASTMAN CHEMICAL CO. recently announced it has acquired Scandiflex do Brasil S.A. Indústrias Químicas, a manufacturer of plasticizers located in Mauá, São Paulo, Brazil. The acquired Scandiflex plasticizer business and manufacturing capabilities are now part of Eastman’s Performance Chemicals and Intermediates (PCI) segment. October 2011

With 2010 sales revenue of $54 million, Scandiflex’s manufacturing capabilities and customer relationships in Brazil will reportedly enable Eastman to accelerate growth of its PCI segment’s non-phthalate plasticizer business in the Latin America region. In addition to regional diversification of both sales and manufacturing, Scandiflex also brings several complementary non-phthalate products to Eastman’s portfolio of plasticizer products. For more information, visit www.eastman.com or www.scandiflex. com.br.

How to strengthen your assets with every adhesive delivery system.

EVONIK INDUSTRIES and Paramelt B.V. recently signed an agreement on the sale of the DILAVEST ® expansion wax business to Paramelt. DILAVEST expansion waxes are used in thermostatic control devices for automotive, marine and aerospace engines, as well as building heating and cooling systems. Evonik will continue producing the products until mid-2012. For more information, visit www.paramelt.com or www.evonik.com.

Call today for a Free sample using your supplied material.

HUNTSMAN recently reported revenues for the second quarter of 2011 of $2,934 million, an increase of 25% compared to $2,343 million for the same period in 2010 and an increase of 10% compared to $2,679 million for the first quarter of 2011. Adjusted EBITDA for the second quarter of 2011 was $318 million, an increase of 24%, compared to $257 million for the same period in 2010 and an increase of 5% compared to $302 million for the 2011 first quarter. Adjusted net income for the second quarter of 2011 was $117 million vs. $75 million for the same period in 2010 and $114 million for the first quarter of 2011. Additional details are available at www.huntsman.com. MOMENTIVE PERFORMANCE MATERIALS INC. announced it will expand production capacity for silanes at its manufacturing facilities in Sistersville, WV, and Termoli, Italy, to help meet growing demand from its global customer base, particularly in China. Capacity for amino silanes will be increased at the Sistersville location, while capacity for vinyl silanes will be increased at Termoli. In addition, Momentive will resume production for

You’ve invested heavily in time and expense to develop your market. You need the reassurance that how your delivery system is packaged will enhance its performance. Now is the time to make the most of your investment with APS as your solution provider of custom packaging of both single & multi-component materials. For over 25 years, we have understood the importance of providing the highest quality world wide, cost effectively, with delivery schedules that remain unsurpassed in the industry. APS...We package more strength into your adhesive delivery systems.

ISO 9001: 2000 CERTIFIED © Adhesive Packaging Specialties, 2006

October 2011

103 Foster St., Peabody, MA 01960 (800) 222-1117 T (978) 531-3300 F (978) 532-8901 [email protected] www.adhesivepackaging.com Adhesives & Sealants Industry

ASI11064APS.indd 1

|

9

5/14/07 10:28:26 AM

COMPANY NEWS

Solutions for

Adhesives & Sealants

Independent Laboratory k Deformulation k Analytical & Physical Testing k Failure Analysis k Contaminant Identification k Litigation Support

Innovation Center k Starting Point Formulation k Formulation Optimization k Process Improvement & Scale-up k Small Batch Toll Manufacturing

888.772.9000

w w w.ca s- mi.com | w w w.innovationC A S - MI.com

ANNOUNCEMENT AUTOMOTIVE ELECTRONIC DEVICES MARKET TO INCREASE 2.9% The global market for automotive electronic devices was valued at $15.1 billion in 2010. That value is projected to reach $17.4 billion in 2015, after increasing at a five-year compound annual growth rate (CAGR) of 2.9%, according to “Automotive Electronic Devices: Technologies and Global Markets,” a new study from BCC Research. The global automotive electronic devices market can be broken down by region into four segments: North America, Europe, Asia, and the rest of the world. The North American region, valued at nearly $5.57 billion in 2010, is projected to reach nearly $5.63 billion in 2015, yielding a CAGR of 0.2%. The European region was worth $5.1 billion in 2010, and that value should reach $5.4 billion in 2015, a CAGR of 1.2%. Worth $3.3 billion in 2010, the Asian region should be worth $4.9 billion in 2015, a CAGR of 8.4%. The rest of the world, worth $1.1 billion in 2010, should be worth $1.4 billion in 2015, yielding a CAGR of 5.3%. The automotive electronic devices market is comprised of five categories: global positioning systems (GPS), automotive video devices, in-dash players, satellite radio, and radar detectors. Strong growth is expected within the automotive video device category, while the satellite radio and radar detection segments are expected to be stagnant or to shrink. For more information, visit www.bccresearch.com trimethoxysilane (TMS), Silquest A-187* epoxy silane and Silquest A-174* methacryl silane at the Sistersville location before the end of the year. Projects are under way at both sites, and completion is expected in 2012. For more information, visit www.momentive.com. OMNOVA SOLUTIONS has announced its 2010 Technology Award recipients. This annual award program recognizes exemplary technological contributions by employees in the company’s research and development, sales and marketing, technical service, operations, product management, LEAN SixSigma, and strategic sourcing organizations. Recipients hail from across the company’s global operations, including its Performance Chemicals business segment facilities in Akron, Ohio; Mogadore, Ohio; Calhoun, GA; and Green Bay, WI; as well as the newly acquired chemical facilities in Villejust and Le Havre, France. For a list of recipients, visit www.omnova.com. ROYAL DSM N.V. and INEOS Melamines recently announced they have reached an agreement for DSM to sell its amino resins business to INEOS, effective September 1. The divestment is reportedly a logical step for DSM after it closed its production facility in the Netherlands at the end of 2009. Since then, a supply agreement with INEOS Melamines for manufacturing melamine and benzoguanamine amino resins has been in place. “Amino resins are mostly used for solvent-based applications, whereas DSM has decided to focus its activities on coating resins with a lower ecological footprint (such as waterborne, powder and UV technologies),” said Patrick Niels, business unit director for DSM Coating Resins. “The divestment of

10

|

www.adhesivesmag.com

October 2011

the amino resins to INEOS is a further step in our strategy to further focus on innovative and sustainable resins. This increased focus will allow us to serve our customers better in ensuring an ever increasing use for sustainable coating technologies.” For more information, visit www.dsm.com or www.ineos.com. TOYO INK AMERICA LLC recently announced it has expanded production of liquid and ultraviolet (UV) inks for packaging applications in the North America region. The company recently relocated its headquarters to a larger facility in Wood Dale, IL. The roughly 109,000-sq-ft facility reportedly boosts the company’s production, development, and technical support capability by affording room for new equipment, an expanded R&D laboratory, and an increase in sales and technical staff. At the new site, Toyo Ink America plans to produce and develop water- and solventbased liquid inks, offset and UV inks, and coatings, primarily targeting the flexible packaging, folding carton, bag, foil, and label printing markets. Visit www.tia.toyoink.com for details. UNIVAR INC. recently announced that it has acquired Arinos, a leading chemical distributor in Brazil. Arinos has relationships with over 60 chemical manufacturers, and delivers over 1,600 products to more than 6,500 customers in diverse end markets. Arinos has also developed over 20 branded products through its formulation business. For more information, visit www.univar. com or www.arinos.com.br.

PEOPLE PPG Industries’ Aerospace business has named MARK CANCILLA global platform director for Coatings and BRENT WRIGHT global platform director for Transparencies, succeeding Cancilla. Cancilla began his PPG career in 1985 at the company’s Pittsburgh headquarters as a glass engineer, then held engineering and program management assignments. As global platform director for Coatings, Cancilla succeeds BRIAN ROBERSON, who has relocated to join PPG’s Architectural Coatings business in Australia.

pany. JOHN FOTHERINGHAM has been named general manager of Advanced Fuel Technologies. In this position, he will lead the commercialization of Celanese TCX™ for fuels on a global basis. Celanese TCX™ is the company’s proprietary advanced technology process for the production of ethanol from hydrocarbon feedstocks. SCOTT RICHARDSON has been named to the position of general manager, Acetyl Intermediates. In this position,

Richardson will lead the global commercial and supply chain operations of the Acetyl Intermediates business segment. JOHN WARDZEL has been promoted to the position of senior vice president for Operations. He will be accountable for Celanese’s global manufacturing operations. The company also announced the retirement of JIM ALDER , senior vice president, Operations & Technical, effective October 31. In his more than

T

®

H E Patented blending/dispersing blade design makes radical improvement over old saw tooth designs

POLY

STAINLESS

*

Most efficient and aggressive blending/dispersing blade available.

*

Provides proper combination of pumping action and shear/ dispersion essential for fast consistent results.

* * * * *

Built in pumping action cuts processing time.

*

Longer life due to heavier gauge construction. Less heat due to shorter required running time. Excellent for high or low speed and high or low viscosity. Supplied with hubs or mounting holes required to retrofit and upgrade present equipment. Pumping blades without teeth are available and are excellent for gentle blending and agitation. DESIGNERS AND MANUFACTURES OF INDUSTRIAL MIXING EQUIPMENT

Since 1948

CONN CO., L.L.C. AND

www.connblade.com

Stirrers Or Complete Units For: PAINTS URETHANE FOAMS ADHESIVES SLURRIES INKS GROUTS CEMENTS ETC. . . .

11 SOUTH MARION STREET • WARREN, PENNA. 16365 • PHONE 814/723-7980

Celanese Corp. recently announced several appointments within the comOctober 2011

FAX (814) 723-8502

s r

r

TM

Adhesives & Sealants Industry

|

11

COMPANY NEWS 37 years with Celanese, Alder has successfully led global organizations in operations, research and development, and commercial. In his current assignment, he led the company’s productivity and sustainability improvement programs, as well as its industry-leading safety achievements. Sea-Land Chemical Co. has hired MAURICIO GALVEZ as an account manager for Sea-Land Chemical Canada Ltd. He reportedly brings excellent credentials and valuable sales experience to Sea-Land in its key markets. M a r o o n I n c . h a s a p p o i n t e d TODD GIALLORATI as an account manager. Based in Hilliard, OH, he will be responsible for the Ohio and West Virginia territory. Giallorati has eight years of specialty chemicals sales experience. Sika Corp. recently announced the appointment of new personnel in its Research and Development Group. PATRICIA HEIDTMAN was named vice president of R&D, with responsibilities for man-

aging activities centered in the Madison Heights, MI, location for the Automotive and Industry Divisions. She replaces FRANK HOEFFLIN, who has taken a global role and will return to Switzerland. S T E P H E N D AV I S j o i n s S i k a a s R & D l a b m a n a g e r, r e s p o n s i b l e for the Automotive and Industry Business Units in Bulk Elastomeric Technologies. JULIE SHERMAN has been promoted to the position of R&D lab manager, responsible for development activities in the Sika Industry Business Unit and Productivity Group focused on Elastomeric Technologies. LESLIE WOLSCHLEGER has been promoted to the position of R&D group leader, responsible for development activities in the Automotive Business Unit for Thermoplastic technologies. The Supervisory Board of LANXESS AG recently appointed AXEL C. HEITMANN , Ph.D., chairman of the company’s Board of Management for an additional five years. Heitmann has held the position since September 2004.

IDI Composites International announced that LARRY LANDIS will head the development team for a new line of engineered structural composites (ESC) targeted to high-reliability applications in the military, transportation and industrial markets. IPC—Association Connecting Electronics Industries ® recently announced that DENNIS “DENNY” P. MCGUIRK h a s resigned from his position as president and CEO to accept a new position as president and CEO of SEMI®, a global industry association serving the manufacturing supply chains for the microelectronic, display, and photovoltaic industries. His last day at IPC will be November 1. United Chemical Technologies has appointed BRUCE ROSE , Ph.D., product manager for the company’s silanes, silicones and platinum catalysts. Based in Bristol PA, Rose will play a key role in managing the product line and growing the company’s global specialties business. CVC Thermoset Specialties, an Emerald Performance Materials company, has appointed CHARLES ZARNITZ product manager for Epoxies. In this role, Zarnitz will support the technical, training and development needs of the company’s epoxy business unit. The company has also named WALT BUSTYNOWICZ vice president of Global Sales. He will assume all management responsibilities for sales internationally through CVC’s distributors overseas and sales agents in the U.S.

HAVE NEWS TO SHARE? Please send press releases to Teresa McPherson at mcphersont@ bnpmedia.com.

12

|

www.adhesivesmag.com

October 2011

CALENDAR OCTOBER

30-5/4 PSTC Week of Learning; Boston, MA; www.pstc.org

4-6

North American Industrial Coating Show; Cincinnati, OH; www.thenaicoatingshow.com

5-7

CEPE Annual Conference and General Assembly; Dublin, Ireland; www.european-coatings.com/cepe

2-3

Green Manufacturing Expo; Charlotte, NC; www. canontradeshows.com/expo/gmx11/tx_event.html

TURKCOAT COATINGS SHOW; Istanbul Expo Center; Istanbul, Turkey; www.turkcoat.com

7-9

TAPPI European PLACE Conference; Seattle, WA; www.tappi.org

15-17 CISILE 2012; Beijing, China; www.cisile.com.cn/en

MAY

6-8

7-10 American Coatings Show 2012; Indianapolis, IN; www.american-coatings-show.com

21-24 PPS Americas Conference 2012; Niagara Falls, Ontario, Canada; www.pps2012.mie.utoronto.ca/ Home/Home.html For a more detailed listing, visit www.adhesivesmag.com.

16-18 ASC Fall Convention; Indianapolis, IN; www.ascouncil.org 18-19 Manufacturing with Composites; Fort Worth, TX; www.sme.org/cgi-bin/get-event.pl?--002084000007-home--SME20

Lead-Free Soldering Technology Symposium; Ft. Worth, TX; www.smta.org/smtai/symposium.cfm#lf

20-22 17th Annual Manufacturing in Mexico Summit; San Carlos, Sonora, Mexico; www.manufacturinginmexicosummit.com 25-27 The Battery Show; Novi, MI; www.iccnexergy.com

NOVEMBER 1-3

2011 CHEM SHOW; New York, NY; www.chemshow.com

9-10 The Composites Engineering Show; Birmingham, UK; www.compositesexhibition.com 9-10 Informex Asia; Suntec, Singapore; www.asia.informex.com 21-23 Abrafati 2011; Sao Paolo, Brazil; www.abrafati2011.com.br/index_engl.html

FEBRUARY 2012 14-16 Green Manufacturing Expo West; Anaheim, CA; www.canontradeshows.com/expo/gmx11/ ana_event.html 21-23 Composites 2012; Las Vegas, NV; www.acmashow.org 26-29 Adhesion Society Annual Meeting and Expo; New Orleans, LA; www.adhesionsociety.org

A word from our customers: "Merlin's flexibility is remarkable. They stock our material and can turn on a dime when our requirements change. They always ship quickly, and more than once have responded to emergencies with next-day delivery. Nice people that are easy to work with. Overall, Merlin is an excellent supplier." B. S. Specialty polymer supplier Merlin customer for 9 years

"Merlin is extremely qualityconscious, with fast delivery and excellent attention to detail. They've given us the opportunity to be competitive on smaller orders by downpacking drums into custom cartridges. Our sales have grown steadily, thanks in no small part to Merlin Packaging." Eric Watson Purchasing Supervisor Rudolph Brothers & Co. Merlin customer for 10 years Merlin provides accurate filling of dual cartridges, syringes, pouches, mixed frozen, and many other packaging options. For fast delivery of big or small orders of quality custom packaging, call Merlin Packaging Technologies today.

MARCH 11-16 Pittcon 2012; Orlando, FL; (800) 825-3221, ext. 203; www.pittcon.org 27-29 Westec; Los Angeles, CA; www.westeconline.com

APRIL

861 Taylor Road, Suite E

15-17 ASC Spring Convention; Denver, CO; www.ascouncil.org

Gahanna, OH 43230 Toll-free: 888-648-7878 [email protected] www.merlinpackaging.com

18-19 NanoManufacturing Conference & Exhibits; Boston, MA; www.sme.org/cgi-bin/get-event.pl?-002081-000007-home--SME-

October 2011

Adhesives & Sealants Industry

|

13

FOCUS ON

MAPEI PARTICIPATES IN AEC CARES PROJECT IN NEW ORLEANS APEI helped the community while participating in the American Institute of Architects (AIA) Convention in New Orleans earlier this year. On May 11, the day before the convention began, MAPEI joined a unified AEC Cares team, spearheaded by Reed Construction Data, the AIA Council of Architectural Component Executives (CACE) and Hanley Wood, working to restore parts of the New Orleans, LA, community. AEC Cares is a service project designed to enhance the lives, safety, and security of the parish community and its residents. It also provides the opportunity for industry professionals to meet and engage within meaningful and organized non-business environments. MAPEI contributed mortars and grouts for installing the tile floors in five homes that are being renovated after Hurricane Katrina’s original devastation and subsequent storms. Mike Daniels and Wilbert Adams, MAPEI employees with extensive tile-setting experience, were on hand to volunteer at the work sites. MAPEI also provided caps for all the volunteers on the project. “This outreach project, facilitated by New Orleans Operation Helping Hands, serves as a reminder that, as we go about our daily lives, there is still work to do,” said Steve Ritchie, vice president of Marketing and Business Development for Reed Construction Data. “New Orleans is still in the process of rebuilding a community and culture that have been so profound in shaping this country. We are grateful to the partners, sponsors—Old Castle, Hunter Douglas, PGT, Bluewolf, MAPEI, Naylor and Vinyl Institute—and volunteers

M

14

|

www.adhesivesmag.com

that have made it their business to get involved and join in a solution to help restore homes within New Orleans.” Directly after Hurricane Katrina ravaged the Gulf Coast in 2005, MAPEI sent 14 truckloads of floor preparation and tilesetting materials to aid in rebuilding 300-400 homes. “This opportunity to work with AEC Cares affords us the chance to help out on a more personal level,” said Luigi Di Geso, president and CEO of MAPEI Americas. “We believe every action helps, and we look forward to the day when the recovery in this area will be complete.”

ABOUT AEC CARES AEC Cares-ProjectNOLA is a service project designed to enhance the lives, safety, and security of the parish community and its residents. ProjectNOLA provides a non-business environment where industry professionals can meet and engage in work that is meaningful, generating new and lasting relationships. For more information about AEC Cares-ProjectNOLA, visit www.AECCares.com.

ABOUT MAPEI MAPEI Group, including 67 subsidiaries with 58 plants in 27 countries, is a world leader in the production of adhesives and complementary products for the installation of all types of floor and wall coverings. The company also specializes in manufacturing other chemical products for building, from waterproofing products to special mortars and admixtures for concrete, products for the restoration of ancient buildings, and special decorative and protective coatings for walls. Eighteen MAPEI manufacturing facilities are located in the Americas, with headquarters in Deerfield Beach, FL. For more information, visit www.mapei.com.

October 2011

What makes this the world’s No.1 High Speed Disperser? Heavy duty drives and bearings – standard

Explosion-proof inverter duty motor – standard

Stainless steel shaft guard – standard

Stainless steel wetted parts – standard

Stainless lock for various size vessels – standard

Sizes 1- 200 HP, dozens in stock for immediate delivery

XP safety switches on height and can position – standard

Air/oil hydraulic lift with an ASME tank and dual controls – standard

Built and supported by Ross, the world’s largest manufacturer of mixers, blenders and dispersers

Superior quality. Priced far below all other major brands. Guaranteed. See the Ross High Speed Disperser now: www.dispersers.com. Or call 1-800-243-ROSS.

Is the BRICS alliance an opportunity for the adhesives and sealants industry to grow and become a hedge against global economic downward trends? By David P. Nick, President and CEO, DPNA International, Inc. he BRIC acronym (representing Brazil, Russia, India and China) was introduced by J. O’Neill of Goldman Sachs in 2001. The concept was further expanded by Goldman Sachs in its Global Economics Paper No. 99 in 2003. The case was made for a collection of emerging countries that shared certain characteristics such as market size, economic development level, growth rate and population. These countries were described as having a similar and potentially collective atmosphere favorable for sustainable growth and, if a certain level of growth were continued through 2050, the BRICS could represent a global economic powerhouse. The intention was not meant to describe a trading bloc, formal political pact or free trade agreement. Instead, it was presented as four emerging countries that shared a common group of characteristics and together represented a unique economic model. Although the acronym has been referenced by many economists, it did not receive much attention before the deep economic recession of 2008-2010. By the third quarter of 2010, the BRIC economies took on new significance as they had “sailed” through the recession, almost as if it never happened. As predicted, their GDP growth was strong and sustained, thus supporting the concept of the new economic model. Meanwhile, the industrialized, developed economic powerhouse nations suffered deeply. During 2010, South Africa began discussions with the four BRIC countries about joining the alliance. A formal invitation was made by China and agreed by the others. South Africa officially became the fifth member on April 14, 2011, and the acronym was changed to BRICS. This group collectively represents 40% of the world population, 25% of the global land area and nearly 30% of the total GDP. BRICS’ 2010 demographic data is provided in Table 1.

T

BUILDING AN ALLIANCE The BRIC example started out as a selection of four countries with similar characteristics. The countries were simply listed as examples in an exercise that defined groups of countries that exhibit certain economic potentials for growth. The four countries took this grouping seriously. Their representatives eventually met and formed a more formal alliance a few years later, even going so far as to hold regular annual meetings. The group 16

|

www.adhesivesmag.com

has evolved one step further by establishing trade agreements among themselves. Each country has an agenda, and this alliance solves many issues facing each of them in different ways. Russia gains access to new export markets for its oil and gas, as well as new sources for raw material and agriculture imports. Brazil can export its food products to China and others, and has land available to set up manufacturing bases to get closer to markets in North America. China gains easier access to India markets, has a built-in market for its exports and can import agricultural products. India has well-developed information technology expertise and can readily market its services to the other members while also serving as a manufacturing technology base. Though South Africa doesn’t quite fit the model, it could stand to gain the most. It is a gateway to Africa and has become a model for other African countries. It also has large mineral reserves that are useful to China. Perhaps the most significant factor in this alliance is the opportunity to trade in non-U.S. dollar/euro currencies, a common concern. It is a major issue in their collective purpose to make the alliance work. Each country, when taken individually, faces a variety of challenges to trade with the developed nations of the world. This alliance now provides a large potential market for exclusive trade between the BRICS countries. Each geographic location is strategically aligned (see Figure 1), allowing them to also engage in their own trading pacts and further enhancing their value as an alliance partner. The BRICS countries offer access to otherwise difficult-toreach markets.

INFLUENCING ADHESIVES AND SEALANTS The BRICS country members are in the early stage of expansion in the adhesives and sealants market. A key indicator of the industry size and growth potential is measured as pounds (or kilograms) of adhesive consumption per capita. The market for each of the BRICS countries is shown in the 2010 market data in Table 2. For comparative purposes, per capita consumption in the U.S. is 21.4 lbs (9.7 kg). The BRICS’ total market size, shown in Figure 2, represents 24% (6.3 billion lbs) of the global 2010 adhesives and sealants demand. Excluded are plywood, particle board, MDF binders and carpet backing adhesives. It is estimated that, by 2050, the BRICS’ share of the global market could reach 40%. October 2011

Figure 1. BRICS Countries

Table 1. BRICs Demographics, 2010 Data Population GPD (million) ($ billion)

GDP Growth

GDP/ Capita

Brazil

194.9

2,052

4.50%

10,530

Russia

141.5

1,737

4.00%

12,280

India

1,202.1

1,832

8.20%

1,520

China

1,345.7

6,460

8.40%

4,800

49.0

346

3.70%

7,050

2,933.2

12,427

n/a

n/a

South Africa Total

Source: The Economist 2011

Table 2. BRICS Adhesive and Sealant Demand, 2010 A&S Demand A&S (thousand Demand 2010-2015 A&S Value metric tons) (million lbs) %AGR ($ million) Kg/Capita

Figure 2. Global Adhesives and Sealants Market Demand Share, 2010

Lbs/Capita

Brazil

166.0

366.0

4.5

515.0

0.85

1.87

Russia

400.0

880.0

5.0

1,276.0

2.83

6.22

India

220.0

484.0

6.0

680.0

0.18

0.40

China

2,000.0

4,400.0

6.0

6,176.0

1.49

3.27

95.7

210.6

5.5

300.1

1.95

4.30

2,881.7

6,340.6

8947.1

0.98

2.16

South Africa Total

Source: DPNA International Inc.

Table 3. Potential BRICS Candidates Figure 3. BRICS Adhesive and Sealant Projections, 2010-2050

Original Member

Candidate

Brazil

Mexico

Russia

Indonesia

India

Egypt or Turkey

China

South Africa (2011)

N-11 COUNTRIES IDENTIFIED BY GOLDMAN-SACHS Bangladesh Iran Pakistan Turkey

Figure 3 illustrates a possible scenario for demand growth of adhesives and sealants by the BRICS from 2010 to 2050. This represents a conservative approach by keeping the demand within the projected GDP growth levels for 2025 and beyond.

THE FUTURE Since South Africa was invited by China to join as a BRIC country, the other three original members have expressed interest to also invite a candidate of their choosing. A possible list of potential candidates being considered is shown in Table 3. The multi-national members of the adhesives and sealants industry have an opportunity to further establish a presence while the economies are open to investment. When planning market entrance strategies, the BRICS’ growth in established markets October 2011

Egypt Mexico Philippines Vietnam

Indonesia Nigeria South Korea

could be significant. If a formulator or raw material supplier is not already in place, it may be too late in the near future. The BRICS countries are working toward developing a new order of business methodology. BRICS’ market participation can be a good hedge against future market downturns. Interestingly, Goldman Sachs has identified another set of countries, the N-11, that also share sustainability growth factors similar to the BRICS, but in an earlier stage of development (see sidebar). This group may become the next “new order” to supplement the BRICS. For more information, contact DPNA International, Inc., 126 Allendale Circle, Troutman, NC 28166; phone (704) 528-3985; email [email protected]; or visit www. dpna-international.com.

Adhesives & Sealants Industry

|

17

FOCUS ON

AWARD-WINNING GLOBAL BRANDS More than 270 participants from 43 countries created works that showcased their creative skills and vision. very Dennison recently announced the winners of the Avery Dennison Brand Experience Contest, which challenged designers to deliver a unique brand identity for fictional products in five categories: children’s juice, red wine, organic coffee, salad dressing and shampoo. The winners were announced at The Dieline Package Design Conference in Chicago. Avery Dennison developed the worldwide packaging design contest to support and inspire design professionals. The contest encouraged more than 270 participants from 43 countries to leave behind normal project constraints and create work that showcased their creative skills and vision. Selected by a panel of internationally recognized designers, educators and thought leaders in the package design industry, the five winners reflect a global group of professionals from design and advertising firms, as well as self-employed design professionals. The winners, by category, were as follows: • Organic Coffee: Mark Roos, Contrast Studio and Photographic Studio, Capetown, South Africa • Salad Dressing: Steve Rischmiller, Saltmine Group, Sydney, Australia • Children’s Juice: Stuart Robson, Saltmine Group, Sydney, Australia • Shampoo: Christopher Loke, Pixology Designs, Orem, UT • Red Wine: Louise Besseling, Tan Branding, Utrecht, Netherlands. “In addition to communicating brand stories, we strive to bring more to the table by offering innovative production, design and business development ideas,” said Christopher Loke of Pixology Designs, winner in the Shampoo category.

A

18

|

www.adhesivesmag.com

“This contest provided a unique platform for us to explore our creativity, learn about new label and packaging innovations, and receive recognition among our peers and potential clients.” As title sponsor of the conference, Avery Dennison displayed the winners’ work in the Brand Experience Contest booth. Following the conference, the winners will receive international acclaim on TheDieline.com, a leading global package design website. In addition, Avery Dennison will create a Look Book that will be shared with 2,000 global consumer packaging brand owners. Each winner also will be given a chance to make a difference through a $1,000 donation in their names to an international charity. “We believe that the combination of compelling design with our innovations and the high-quality printing by our converter partners can ignite brands on the shelf and beyond,” said Jon Maley, global vice president of Marketing for Avery Dennison Label and Packaging Materials. “Better branding helps grow the industry for everyone.” To view the work of the winners and finalists, visit www.enhanceyourbrand.com/design-contest.

ABOUT AVERY DENNISON Avery Dennison helps make brands more inspiring and the world more intelligent. For more than 75 years, the company has been a global leader in pressure-sensitive technology and materials, retail branding and information solutions, and organization and identification products for offices and consumers. A Fortune 500 company with sales of $6.5 billion in 2010, Avery Dennison is based in Pasadena, CA, and has employees in over 60 countries. For more information, visit www.averydennison.com.

October 2011

FOCUS ON

NORDSON ACQUIRES FLEXIBLE PACKAGING EQUIPMENT MANUFACTURER VERBRUGGEN ordson Corp. has completed the acquisition of Temse, Belgiumbased Constructiewerkhuizen G. Verbruggen NV, a leading manufacturer of flat dies and coextrusion equipment for the multi-layer flexible packaging industry. At the close of the deal, Verbruggen had current fiscal year estimated sales of @ 8 million (~ $11 million) and employed approximately 40 people. The company will operate as part of Nordson’s Adhesive Dispensing Systems segment. Nordson reportedly expects the acquisition to be neutral to the company’s earnings in the first full year of operation. “ Ve r b r u g g e n p r o v i d e s N o r d s o n an excellent entry into the flexible packaging market, and it is a natural

N

October 2011

complement to our existing leadership position in rigid packaging applications,” s a i d M i c h a e l F. H i l t o n , p r e s i d e n t and CEO, Nordson. “Like Nordson, Verbruggen occupies a strategic place in the packaging supply chain, providing key value-added equipment to OEMs. The combination of Nordson’s global footprint and Verbruggen’s differentiated technology will enable us to capture multiple new opportunities as flexible packaging continues to grow worldwide.”

ing and inspection of electronic components and technology-based systems for curing and surface treatment processes. Headquartered in Westlake, Ohio, Nordson has direct operations and sales support offices in more than 30 countries. For more information, visit Nordson at www.nordson.com.

ABOUT VERBRUGGEN Verbruggen is a leading global manufacturer of flat dies and coextrusion equipment. With an experienced workforce, the company combines an extensive knowledge of extrusion with the latest processing machinery technology. All processes are

ABOUT NORDSON

completed in-house, from geometric calculations through

Nordson Corp. is a leading global producer of precision

to finishing operations. In addition, the company fea-

dispensing equipment that applies adhesives, sealants,

tures a hard chrome plating department, which is a sig-

powder and liquid coatings, and other materials to a

nificant advantage when providing the highest possible

range of consumer and industrial products. In addition,

quality finish. For more information, visit www.verbrug-

the company manufactures equipment used in the test-

gen.be/index.php/en.

Adhesives & Sealants Industry

|

19

INCREASING PACKAGING SPEEDS Flexible packaging companies are increasingly feeling the pressure to reduce costs in order to remain competitive. By Bonnie Richter, Business Manager, Splicing Business Unit, Adhesives Research, Inc.

needs of this market and guiding flexible packaging manufacturers and converters in their adhesive selection process.

ADHESIVE SELECTION

Adhesive consultants can evaluate the manufacturing process and the substrates to be spliced in order to specify the right tapes for each application.

he flexible packaging industry is the second-largest packaging segment, representing approximately 18% of the $143 billion U.S. packaging industry. Fueled by steady growth, the industry has benefited from the development of innovative products, advancements in technology, the introduction of flexible packaging into new and existing markets, and the ability to meet the ever-changing needs of customers and consumers. Despite this growth, flexible packaging companies are increasingly feeling the pressure to reduce costs in order to remain competitive. A major driver of price can be seen in the food industry, where consumers are searching for convenience and value in the products they purchase while becoming progressively more interested in their

T

20

|

www.adhesivesmag.com

personal impact on the environment. In response to these demands, the industry is rapidly transitioning from rigid packages to cost-effective film pouches. In addition to lowering material expense, manufacturers and converters are looking to reduce costs by addressing production efficiency as measured in product throughput as it relates to line speeds, downtime, and product waste. Adhesives used for splicing web materials in flexible packaging and converting applications are a necessary component in the equation for efficient throughput; however, selecting the wrong adhesive for a particular machine or substrate can result in costly machine downtime and waste. Adhesive manufacturers can add significant value to products by understanding the specialized

In an industry where time is money, packaging manufacturers and converters need a product that is highly reliable, safe and easy for operators to apply. For many reasons, pressure-sensitive adhesive (PSA) tapes are an attractive bonding choice because they deliver consistent, immediate bonds with minimal preparation, require no adhesive dry times, and eliminate liquid splash to finished product. These features and benefits are proven to reduce downtime and cleanup. A PSA splicing tape used in place of a liquid adhesive allows for uniform thickness of the adhesive during application without the need for application equipment, specialized storage or the use of solvents for thinning. PSA splicing tapes also eliminate OSHA compliance issues regarding the use of liquid adhesives. Multiple factors need to be considered to ensure that the proper adhesive is selected for the application. For this reason, flexible packaging manufacturers and converters can benefit by working directly with an adhesive consultant that is wellversed in splicing tape technology and applications. Consultants can thoroughly evaluate the client’s manufacturing process and the substrates to be spliced, and provide specific training to line operators. October 2011

Discover clean solutions Be inspired by designed polymers for Adhesives & Sealants

With VESTOPLAST® amorphous Poly-alpha-olefins (APAOs) Evonik‘s Adhesive Resins Product Line designs co- and terpolymers of ethene, propene and 1-butene for hot melts used e.g. in the hygiene, packaging, woodworking and automotive industry. Discover our portfolio of designed polymers created for your individual solutions within the industrial adhesives and sealants market: DYNACOLL®, VESTOPLAST®, VESTOWAX®, POLYVEST®, DEGALAN® For more information: www.evonik.com/designed-polymers

INCREASING PACKAGING SPEEDS

Splicing tapes for flexible packaging applications are available in a variety of colors, as well as double- and single-faced and transfer adhesive constructions.

Four main factors should be considered when selecting a PSA for a core start or splicing application: substrates to be spliced, oven temperatures, line speeds and web tension. These factors should be evaluated through every step of production—from the beginning processes to final product conversion. Proper consideration ensures that the right splicing product (or combination of products) is used, which helps reduce or eliminate splice failure at any point in the process. A majority of pouch-type designs are comprised of low-surface-energy polyethylene and polypropylene films that require a highly aggressive adhesive available only through rubber-based adhesives, including hot melts. Rubberbased chemistries provide high tack and peel, which is important in automatic flying splices that require adhesion levels to be established in a quarter of a second while having the bond strength to hold and immediately pull the next roll of continuously flowing product. Because rubber-based adhesives can be affected by extended exposure to temperatures over 150°F (66°C), certain chemicals and UV light, it is important to understand the entire manufacturing process to ensure the splice

Finally – A better way to wrap pallet loads. The Yellow Jacket Orbital Stretch-Wrap Machine Delivers: • • • •

Productivity. Boosts pack-to-ship performance and minimizes labor requirements. Security. Locks any load to the pallet without banding or strapping. Confidence. Reduces the chance of product damage from shifting or sliding. Safety. Eliminates jerky, side-to-side movements of hand wrapping

that lead to back injuries and increased worker compensation claims. Eliminates injuries associated with metal banding. • Speed. Stretch wraps most loads in 3 minutes or less. • Savings. Savings. Savings. No other stretch-wrap method can beat its overall cost efficiency. Call for a free analysis of your projected savings.

Call 1-800-387-5001

Financing Options Available

®

A Business Unit of

www.yellowjacket110.com 22

|

www.adhesivesmag.com

October 2011

does not fail in downstream operations that might include these conditions. Additional common packaging substrates include polyester and polystyrene, which are well-suited for acrylic-based adhesives. Acrylics are easily crosslinked to achieve a wide range of performance properties, making them extremely versatile for a number of splicing applications. Although they are high tack, acrylics do not bond as well to low-surface-energy or high-slip substrates. The strengths of acrylics complement the weaknesses of rubber-based chemistries, meaning they perform well in high temperatures (up to 350°F/176°C) and withstand UV light and exposure to solvents. From an efficiency standpoint, most flexible packaging manufacturers using common substrates benefit most by using PSAs for quick-stick application. However, some specialty substrate applications may call for heat-activated or UV-curable adhesive tape technologies as an alternative splicing product.

ADDITIONAL CONSIDERATIONS The competitive and dynamic flexible packaging industry requires adhesive man-

ufacturers to lead proactive interaction with their packaging clientele in order to ensure that the right products are being used for the industry’s ever-changing range of substrates and machinery upgrades. Manufacturers are investing significant capital in replacing or retrofitting production lines for additional automatic capabilities that increase throughput. Millions of dollars are often spent on new machinery, sometimes under the incorrect assumption that the tapes used on the original machinery or in other areas of the plant will successfully perform on new or upgraded equipment. Compatibility is often not the case when line speeds increase to in excess of over 1,500 ft/min. A requalification of the core start and splicing tapes, as well as splice configurations, should occur to maximize performance of any new machinery, or products on new or existing machinery. As packaging materials continue to evolve and flexible packaging manufacturing operations become more automated, adhesive manufacturers will be challenged to offer the right mix of high-performance splicing tapes. While the majority of the PSA splicing choices for flexible packaging

are based on rubber and acrylic formulations, adhesive manufacturers can tailor adhesive chemistry, adhesion levels, coat weights, carrier materials and tape constructions to offer value-added products to address a full range of splicing needs, including adhesives meeting the U.S. Food and Drug Administration’s (FDA) requirements for indirect food contact. As production speeds increase, so does the demand for even more aggressive adhesives for challenging substrates, providing an opportunity for adhesive manufacturers to differentiate their product lines with highly visible and aggressive adhesives for high-slip materials. In this dynamic and fast-paced industry, manufacturers and converters will increasingly rely on adhesive manufacturers to help specify the right products and splice configurations. Charging forward in their mission of increasing speed and efficiency while reducing waste will help manufacturers and converters remain as competitive as possible in today’s marketplace. For additional information, contact Adhesives Research, Inc. at 400 Seaks Run Rd., Glen Rock, PA 17327; phone (717) 235-7979; email the author at brichter@arglobal. com; or visit www.arglobal.com.

G

orman-Rupp positive displacement rotary gear pumps are versatile enough to handle virtually any liquid or pumping application. They are manufactured with unique features and flexible seal designs that enable them to perform better and last longer than other gear pumps.

X-465

October 2011

Adhesives & Sealants Industry

|

23

With careful research, polymer chemistries can be tailored to end-use applications. By Michelle Moss, Industry Manager, DSM Coating Resins

olymers have been used in the formulation of adhesives for decades. In recent years, the technology base has been optimized and expanded to include a broader range of polymer chemistries. Polymers used for adhesive formulation include water-based acrylic emulsions and solid acrylics, urethane and urethane-acrylic dispersions, and solvent-based polyesters. This later technology is ideal for the lamination of filmic substrates used in flexible packaging. Today, polymers play a major role in the formulation of adhesives for a broad range of applications in other packaging markets such as lidding, labeling, and blister-pack, as well as industrial markets like automotive, general lamination, wood bonding, and consumer markets.

P

BOTTLE LABELING Synthetic polymers are commonly used for paper and polyester labeling substrates. Water-based acrylic copolymers using acid-stabilized colloidal or emulsion technology offer an excellent balance of adhesion and end-performance properties for bottle labeling applications. The main challenge is to balance stable application viscosity (for high-speed filling lines), high-performance adhesive properties and ease of label removal for recycling. NeoCryl BT-207, a water-based acrylic emulsion, is a viable alternative to natural casein products that have been predominantly used in this market. Historically, adhesive formulators have faced major difficulties when replacing natural casein-based adhesives for bottle labeling applications. Manufacturers of synthetic polymers struggled to match the full performance range and benefits of casein. However, due to issues with supply constraints, consistent quality and the price volatility of casein, there is a real need to find a synthetic alternative. The performance of NeoCryl BT-207 closes this gap, offering enhanced performance for high-speed stable viscosity over a pH range of 8-8.6 with improved hyper-condensation resistance for cold-fill bottle labeling. In addition, the emulsion is not susceptible to biological attack. The combination of these benefits provides an advantage in the form of overall cost reduction. 24

|

www.adhesivesmag.com

FLEXIBLE PACKAGING The significant growth of filmic substrates for flexible packaging is well known; lightweight alternatives to metal cans offer consumers ease of use and allow for more decorative and attractive graphics that are ideal for point-ofsale and marketing promotions. The package itself is constructed of bonded layers of different filmic substrates, including metalized layers and alumina foils, and incorporates closing mechanisms for ease of storage. The ideal adhesive must achieve universal high bond strength with the different material layers, as well as high performance in a variety of packaging procedures, including pasteurizing and retortable processes. Using its capabilities and knowledge of polyester chemistry for can and coil coatings, DSM has developed a polyester polymer for use as a high-performance lamination adhesive. NeoRez P-900, a high-molecular-weight, OH-functional polyester polymer, is recommended for use as a universal laminating adhesive for flexible packaging and filmic substrate applications. This polymer displays excellent adhesion to a broad range of substrates, including co-extruded polypropylene, b i a x i a l - o r i e n t a t e d p o l y p r o p y l e n e a n d p o l y e s t e r, polyethylene, polyamide, and aluminum. NeoRez P-900 can be formulated to take advantage of the high molecular weight to improve productivity with faster lamination throughput, lower post-curing temperature and a more rapid post-curing time. Performance can be enhanced with the addition of an isocyanate crosslinker, which can lead to an overall cost reduction due to the lessened amount of crosslinker required to equal the performance of competitive urethane systems. NeoRez P-900 also features high performance and maintains excellent bond strengths under retorting conditions, which makes it ideal as a flexible packaging lamination adhesive and an alternative to commercial crosslinked, solvent-based urethanes. NeoRez P-900 is free of aromatic isocyanate and amine additives in its composition and is compliant with the U.S. Food and Drug Administration’s food contact requirements. October 2011

Table 1. Bonding Strength vs. Time and Condition 9

FT

8

Bondstrength (N/15 mm)

7 0.6% 9L10

6

1.2% 9L10

5

2.4% 9L10 0.6% crosslinker

4

1.2% crosslinker

3

2.4% crosslinker

2 1 0 1 day

RT

52 °C

4 days

RT

52 °C

7 days

RT

52 °C

Time and condition

HEAT-ACTIVATED ADHESIVES Urethane dispersions are used for heat-activated adhesives in industrial lamination processes for the construction of automotive interiors such as dashboards, door trims and roof linings. These dispersions are also used in the manufacture of kitchen cabinets, laminating PVC foils onto MDF board, and rigid plastic lamination of credit card and graphic display panels. DSM Coating Resins uses both pre-polymer and inversion polymerization production techniques to produce a range of urethane dispersions. Careful selection of raw materials and processing conditions yields polymers that are solvent-free, easy to formulate, and feature low activation temperatures and high bond strength (which can be formulated to attain high temperature resistance). NeoRez R-1400 is an aliphatic polyester urethane polymer dispersion developed for heat-activated adhesive formulation. NeoRez R-1400 offers the combined properties of low temperature activation, good early green strength, and high temperature resistance when crosslinked with polydispersible isocyanate. The polymer imparts high bond strengths and displays excellent adhesion to a variety of materials, including wood, common grades of plastic films, and vinyl laminates. The low activation temperature characteristic of the polymer makes this resin ideal for use in waterborne adhesives that require reduced bonding temperatures (i.e., in applications where temperature-sensitive substrates are used, such as decorative vinyl lamination in automotive interiors and kitchen cabinet assemblies).

WOOD ADHESIVES Urea-formaldehyde resins have been used for many years as the workhorse adhesives in wood bonding applications. Inexpensive thermoset urea-formaldehyde is ideally suited to the high performance and long life requirements in applications such as the low-cost, high-volume furniture market and general wood lamination. In today’s market, however, additional focus has been placed on reducing environment impact and maintaining October 2011

RT retort direct

52 °C

RT

52 °C

retort 1 day

Figure 1. Multiple Benefits Provide Overall Cost Reduction

worker safety. The use of formaldehyde is therefore under pressure, and the market is looking for viable alternatives. NeoPac E-850 is a formaldehyde-free, water-based aliphatic polyester urethane-acrylic dispersion. This system was developed specifically for use in wood furniture adhesives due to its bond strength and excellent water and heat resistance. As a water-based polymer, it can be highly loaded with mineral fillers to reduce the overall water content in the formulated adhesive without loss of adhesion properties. This is a necessary requirement for most wood laminating production methods in controlling viscosity, wood penetration and faster drying. The product can be used in adhesives to form flat or shaped laminated parts. The nature of the resin imparts the necessary performance to withstand bond stresses in the laminate along bends in the formed components. In addition, it exhibits good water and fatigue resistance properties. The product meets the standards of major flatpack supplier regulations regarding formaldehyde-free and wood furniture construction performance. For more information, visit www.dsm.com.

Adhesives & Sealants Industry

|

25

FOCUS ON

The plant opened in 1961 and is reportedly the largest styrenic thermoplastic elastomer production facility in the world.

MAJOR MILESTONE Kraton Performance Polymers manufacturing plant celebrates 50 years of innovation. raton Performance Polymers, a leading producer of styrenic block copolymers (SBCs), celebrated the 50-year anniversary of its manufacturing plant in Belpre, Ohio, on September 20. Held at the Belpre plant, the celebration was hosted by Kevin M. Fogarty, president and CEO, and Dan F. Smith, chairman of the board. The event was attended by Kraton senior executives, as well as a number of customers, suppliers and the media. Also in attendance were state and local dignitaries who represent the Mid-Ohio Valley, which encompasses both Ohio and West Virginia. “We are excited to commemorate this milestone achievement,” said Fogarty. “The 50th anniversary celebration of our Belpre plant is a perfect opportunity for Kraton Polymers to show its appreciation for the loyalty, dedication, and commitment of our employees, valued customers, the Mid-Ohio Valley, and our neighbors in Belpre, in particular. Kraton’s Belpre plant has played a critical role in our ability to deliver cutting-edge, highly engineered solutions that continue to help solve problems and make lives better. Kraton has developed a rich portfolio of innovation products and a pipeline of new products and applications for styrenic block copolymers, and this has helped set us apart from our competitors.” The company’s annual picnic kicked off the 50th celebration on the weekend of September 17, with more than 850 local Kraton employees, retirees and their families attending. Kraton also constructed an exhibition hall to showcase its latest technological advancements, including the recent commercialization of a new C5 tackifier reduction technology. Kraton’s new SIBS-based compound enables customers to reduce the amount of tackier resins by 15-20% while achieving similar or better performance at similar system costs in hot-melt pressure-sensitive adhesive (PSA) applications. “Our tackifier reduction product technology gives customers a new sourcing option in pressure-sensitive adhesives formulations as our customers manage the ongoing supply challenges in their

K

26

|

www.adhesivesmag.com

target markets,” said Mark Siebert, vice president for Adhesives, Sealants & Coatings. “Our customers can now formulate their adhesive products using less tackifying resin to support immediate growth opportunities previously limited by the structural shortage of piperyline. In addition, our technology can be extended to SBS polymer grades typically used for nonwoven construction. Kraton Polymers’ research and development efforts continue to explore new chemistry options to reduce the dependency on scarce formulating ingredients, and this is a perfect example of Kraton ‘Giving Innovators Their Edge.’”

PLANT DETAILS Serving as the company’s flagship facility, the Belpre plant produces a broad product range of SBCs, including both hydrogenated (SEBS, SEPS) and unhydrogenated (SBS, SIS) grades. The plant opened in 1961 and is reportedly the largest styrenic thermoplastic elastomer production facility in the world. The 330-acre plant has approximately 600 employees and contractors. It is located on the north bank of the Ohio River, less than five miles west of Parkersburg, WV, and 15 miles south of Marietta. The plant features four polymer process units, four finishing/ packaging operations and a polymer compounding unit. At full capacity, the Belpre plant produces approximately 189 kilotons of Kraton polymers (thermoplastic rubber) each year. The product offering includes nearly 70 polymer grades in pellet, crumb, and powder form, which are packaged in bales, boxed bags, stretchwrapped bags, boxes, and bulk. In 2011, with an emphasis on health and safety, the company’s board of directors allocated approximately $37 million for instrumentation upgrades and the construction of state-ofthe-art lab facilities. The company also successfully launched a line conversion for new solid isoprene rubber (IR) capacity to support sales growth in Cariflex™ isoprene rubber, a pure, highperformance alternative to natural rubber that replaces the capacity from the Pernis, Netherlands, facility that was closed in October 2011

2009. The line conversion project began in 2010, was completed in 2011 and represents a capital investment of $27 million.

PRODUCT OFFERINGS Kraton produces high-performance elastomers engineered for a variety of end-use applications. The elastomers have a combination of high strength and low viscosity that facilitates ease of processing at elevated temperatures and high processing speeds. The company’s products can be processed in a variety of manufacturing applications, including injection molding, blow molding, compression molding extrusion, hot melt and solution-applied coatings. Kraton also offers a broad product portfolio of value-enhancing polymers that are used in a number of applications, including consumer and personal care items, adhesives and coatings, electronics, medical supplies, automotive components, and paving and roofing materials. Many of the world’s top Fortune 500 companies have chosen to partner with Kraton Polymers for the development of creative solutions. Kraton offers approximately 800 products to more than 700 customers in over 60 countries worldwide, and its intellectual product portfolio includes approximately 1,400 patents (issued or pending). In the adhesives, sealants and coatings market, Kraton SBC products primarily compete with acrylics, silicones, solvent-based October 2011

rubber systems and thermoplastic polyolefin elastomers. The choice between these materials is influenced by bond strength, specific adhesion, consistent performance to specification, processing speed, hot-melt application, resistance to water and total end-product cost. For this sector, Kraton’s products are used in a number of demanding applications, such as adhesives for diapers and hygienic products, sealants for construction and automotive applications, and adhesives for tapes and labels. In tapes and labels, either solvent-based or hot-melt forms, Kraton SBCs impart water resistance, color stability, strong bonding characteristics high cohesive strength, good ultraviolet light resistance, heat stability, and long shelf life. Its coatings polymers have expanded into the elastomeric white roof coatings sector to provide not only weather resistance, but also improved energy efficiency, reducing solar absorption on bitumen-based industrial roofs.

ABOUT KRATON Kraton Performance Polymers is a leading global producer of styrenic block copolymers, which are highly engineered, synthetic elastomers used to enhance the performance of enduse products that touch our daily lives. Kraton is the original inventor of SBC chemistry dating back to the 1960s and has a history of innovation dating back almost 50 years. For additional information, call (800) 4-KRATON or visit www.kraton.com.

Adhesives & Sealants Industry

|

27

FOCUS ON

LORD PROVIDES HIGH-PERFORMANCE COATING TO PETROBRAS HPC-5C can protect offshore platforms’ rubber parts from ozone attack. igh-performance coatings manufacturer LORD recently began supplying HPC-5C to Brazil-based energy provider Petrobras. The product protects rubber artifacts against ozone attack, preventing the cracking of materials derived from elastomers. Based on hydrogenated nitrile (HNBR), HPC-5 was developed to protect parts from continuous and periodic exposure to petroleum oils as well as ozone. The coating is also reportedly tough and highly abrasion resistant. Over the past two years, HPC-5C was tested by CENPES, Petrobras’ research and development unit, in the UK-based independent laboratory Merl. The coating will be reapplied by Petrobras every three months, due to the typical aggressiveness caused by the marine environment. “Compared with other coating options for rubber, HPC-5C had the best performance in accelerated tests performed in an ozone chamber,” says Bruno Fragoso, New Business Development manager for LORD. “We developed a highly technological solution customized for the oil and gas market,” Fragoso says. HPC-5C will initially be produced in LORD’s Cary, NC, headquarters, but it may start being manufactured in Jundiaí (Brazil), where

H

28

|

www.adhesivesmag.com

the company has been operating an industrial complex since 1973, according to Fragoso. Additional product applications include mounts for absorbing vibration on shaker tables, engine mounts, muffle hangers, engine compartment hoses, offshore rubber parts, etc. The product will be available worldwide. The oil and gas market has become LORD’s primary consumer. Recognized worldwide as one of the most important suppliers of solutions for the automotive, aerospace and defense sectors, the company intends to take its expertise to the deepwater drilling segment.

ABOUT LORD Specializing in the manufacture of adhesives, primers, varnishes and coatings based on water, epoxy, acrylic, and polyurethane, LORD Industrial Ltda.—a subsidiary of the North American LORD Corp.—began its activities in São Paulo, Brazil, in 1972. The following year, it transferred its productive unit to the industrial hub of Jundiaí (São Paulo), where it remains today. Throughout this period, LORD has become a main producer in the Brazilian adhesive market, principally with regard to the fabrication of products with low levels of heavy metals, primers for the treatment of metal surfaces and water-based adhesives. For further information, visit www.lordla. com.br and www.lord.com.

October 2011

FOCUS ON

SHERWIN-WILLIAMS RELEASES FDACOMPLIANT COATING

• Aqueous, acid or nonacid products containing free oil; may contain salt or sugar or both, and including oilin-water emulsions of low- or highfat content • Dairy products and modifications: A. Water-in-oil emulsion, high- or low-fat. B. Oil-in-water emulsion, high- or low-fat • Low moisture fats and oils. • Beverages: A. Containing alcohol. B. Nonalcoholic • Bakery products • Dry solids Magnalux 304 is reportedly formulated to save time and labor and ensure a fast return to service. It can be applied in one coat for a dry film thickness of 14-16 mils, is fast drying and cures in two to three days. The product is also low in volatile organic compounds (VOCs), at fewer than 150 g/l. It is also easy to clean and disinfect, allowing tanks and vessels to be returned to service quickly.

The coating is low in volatile organic

Magnalux™ 304 FF is a flake-filled vinyl ester for dry and liquid storage. ood and beverage manufacturers require storage coatings that meet the highest safety standards while offering long-lasting performance and easy care. Sherwin-Williams recently introduced a product to meet these demands. Magnalux™ 304 FF is a flake-filled vinyl ester that has been approved for food contact surfaces associated with producing, storing and transporting food products. Magnalux 304 is a chemical resistant immersion coating comprised of a vinyl ester resin containing mica flakes that reduce permeability and improve edge retention for longer service life. Offering maximum flexibility, the coating is formulated with an extended pot life and can be applied with conventional or airless spray equipment on steel and concrete surfaces.

F

October 2011

The coating meets U.S. Food and Drug Administration (FDA) 175.300 for conditions of use D, E and F, covering dry and liquid foods and beverages that are hot filled or pasteurized below 150°F; room temperature filled and stored, with no thermal treatment in the container; and subject to refrigerated storage, with no thermal treatment in the container. The coating is approved for food types I, II, III, IVA and IVB, V, VI, VII, and VIII within these ranges: • Nonacid (pH above 5.0), aqueous products; may contain salt or sugar or both, and including oil-in-water emulsions of low- or high-fat content • Acidic (pH 5.0 or below), aqueous products; may contain salt or sugar or both, and including oil-in-water emulsions of low- or high-fat content

compounds.

“While we have provided coatings and linings for food and beverage applications for many years, Magnalux 304 fits very nicely in our portfolio of products for this industry,” said Narsi Bodapati, vice president of Marketing. “We are pleased to offer our food and beverage customers this new storage coating option backed by the expertise and innovation they expect from Sherwin-Williams.”

ABOUT SHERWIN-WILLIAMS Sherwin-Williams is a global protective and marine coatings company that delivers service and support to its customers from 3,900 locations worldwide. From alkyds to zincs, the company offers a complete line of time-tested, high-performance coatings and systems to combat corrosion, supported by the largest group of NACE-certified coatings inspectors in the industry. For more information, visit www.sherwin-williams.com.

Adhesives & Sealants Industry

|

29

RHEOLOGY SOLUTIONS for Adhesives Testing When testing adhesive materials, dual capability is vital to the range of necessary rheological tests. By John Walters, Senior Engineering and R/S Product Manager, Brookfield Engineering Laboratories, Inc.

ontrolled stress rheometers with cone/plate or plate/plate geometry are ideally suited for a variety of adhesive measurements. They also have the capability to apply a defined shear rate to the adhesive material. These instruments can operate in either controlled stress mode for yield stress, creep and recovery tests, or at a controlled rate for viscosity testing. The following performance capabilities are important in a versatile controlled stress instrument for running a wide range of rheological tests: • Controlled stress capability, with ramping up to several thousand Pascals • Defined shear rate capability, with ramping up to several thousand reciprocal seconds • Small sample volume on the order of 1-5 mL, depending on spindle geometry • Fast, easy cleanup • Wide temperature range, preferably from 0-200ºC • Fast temperature change, possible when using peltier technology; instruments can change from ambient temperature to 100°C (or

C

30

|

www.adhesivesmag.com

vice versa) in five minutes or less • High torque range up to 50 mNm for measuring thick materials • Spindle geometries with cones and plates of various diameters that allow measurement of viscosities from ~100 cP (100 mPa·s) to >15,000,000 cP (15,000 Pa·s) The following examples describe potential uses of controlled stress rheometers.

VISCOSITY VS. SHEAR RATE FOR TWO ADHESIVES As shown in Figure 1, a simple speed ramp from 0 sec-1 to 100 sec-1 tests two variations of an adhesive. The adhesive indicated by the data shown in red performs well; the green, less so. Tests with a conventional viscometer at one speed produced similar viscosity values. The test with the rheometer over the shear rate range in the figure clearly shows that the green material, while near the red at low shear rates, thins and seems to become unstable at shear rates over 20 sec-1. If the adhesive is applied at fairly high shear rates, the green formulation will not work.

SHEAR STRESS RAMP AND VISCOSITY PROFILE Yield stress (i.e., the point at which flow begins) can be an important property. Many consumer adhesives are supplied in tubes that the consumer squeezes the adhesive out of. If too much force is required to initiate flow, the product may not be acceptable to consumers. Using a controlled stress instrument, a simple stress ramp provides a precise yield stress value. In Figure 2, shear stress is ramped from 0 Pa to ~ 600 Pa over 60 seconds. Because the adhesive does not move until the yield stress is achieved, there is no shear rate (and hence viscosity) until yield takes place. The graph clearly shows that the yield stress value for this adhesive is ~ 50 Pa (see the curve in red), which is an acceptably low value. In addition, this graph shows that the adhesive is pseudoplastic (i.e., exhibits decreasing viscosity with increasing shear rate), so the viscosity will decrease as the consumer squeezes the tube (see the curve in green). The consumer will not need to squeeze the tube with significant force, and the adhesive will be easily applied. October 2011

VISCOSITY VS. SHEAR RATE UP-DOWN TEST TO ASSESS RECOVERY

Figure 1. Viscosity vs. Shear Rate for Two Adhesives

When the adhesive is supplied in a tube or container, force is required for application of the material. Viscosity recovery may be an issue. As force is applied and the shear rate increases, the viscosity will probably change (most commonly, it will decrease). After having been sheared, if the material does not recover to a fairly high viscosity, it may not “stay where it is put,” which can be a problem. A simple two-step flow curve, which only takes two minutes, assesses both the degree of shear thinning behavior and the recovery. The test program has two steps. In the first step, shear rate is ramped from 0 sec -1 to 300 sec -1; in step two, it is ramped from 300 sec -1 to 0 sec -1. As is evident in Figure 3, viscosity in the first step drops dramatically from ~ 80 Pa·s (80,000 cP) at low shear rates to ~ 5 Pa·s (5,000 cP) at 300 sec -1. In the second step, some “interesting” behavior then begins at about 160 sec-1. Although the step-two viscosity values are less than the step-one values for any given shear rate, there is recovery and the final viscosity reading of ~ 52 Pa·s (52,000 cP) will be high enough for the adhesive to stay where it is applied. Figure 2. Shear Stress Ramp (Red) and Viscosity Profile (Green)

TWO-POINT QC TEST While viscosity data taken over multiple rotational speeds provides more information about the fluid flow properties, a quick QC test can be accomplished with two data points: one at high shear rate and the other at a low shear rate. To further simplify the test procedure, this type of test can be done without PC control (though using a printer is recommended). In Figure 4 (p. 32), viscosity readings are taken at 10 sec-1 and 500 sec -1 . The printed output displays viscosity under the term “Eta” and the two values noted are 15.410 Pa·s and 1.279 Pa·s, respectively. This clearly indicates a significant degree of shear thinning behavior, which is desirable for good adhesive performance when in use. Note that all measured values are printed, as well as instrument and program information.

MATH MODEL ANALYSIS OF VISCOSITY DATA USING THE OSTWALD REGRESSION When a controlled stress rheometer is under software control, the ability to apply a regression analysis to the test data offers a significant opportunity to analyze the data quickly and effectively. With good correlation, this allows the estimation of viscosity values at untested shear rates. Figure 5 (p. 32) shows the Ostwald (power law) regression for a nearly Newtonian fluid having a viscosity of ~ 250 Pa·s (250,000 cP). It would take considerably more torque capability in an instrument to test the fluid at a shear rate of 1000 sec -1 (a 30-hp rheometer would be quite expensive). Because the correlation to the Ostwald model is good (99.628, in this case), we can use the model to estimate the viscosity at 500 sec-1 and 1,000 sec-1. The values were 246.725 Pa·s and 246.090 Pa·s, respectively, seen at the end of the results where stress and rate are also shown. The Ostwald n and k values are shown as constants 1 and 0; the n is 0.9962 while the k is 252.489 Pa·s.

Figure 3. Viscosity vs. Shear Rate Up-Down Test to Assess Recovery

VISCOSITY VS. SHEAR RATE FOR HIGHLY VISCOUS ADHESIVE Figure 6 (p. 32) shows the high viscosity capability of the controlled stress rheometer. The test was a simple stress ramp up to ~ 6,100 Pa October 2011

Adhesives & Sealants Industry

|

31

RHEOLOGY SOLUTIONS FOR ADHESIVES TESTING Figure 4. Two-Point QC Test

Figure 5. Math Model Analysis of Viscosity Data Using the Ostwald Regression

Figure 6. Viscosity vs. Shear Rate for Highly Viscous Adhesive

Figure 7. Vane Spindle Rotation vs. Time Measures “Stiffness”

using 25 mm flat plate geometry. Note that at low shear rates (below 1 sec-1), the viscosity was well over 1,000 Pa·s (1,000,000 cP). Testing fluids that are highly viscous at defined shear rates is nearly impossible with other moderately priced instruments.

materials will pull the vane back toward the start point. In this example, the red, light green and green samples were acceptably stiff; the purple sample was not sufficiently rigid (see Figure 7).

DUAL CAPABILITY VANE SPINDLE ROTATION VS. TIME MEASURES “STIFFNESS” This application uses the vane spindle with a controlled stress rheometer. Vane spindles are useful for low shear measurement of very high-viscosity, near-solid materials. In this case, a heavy flooring adhesive served as the sample. The test includes two steps, using stress (or torque) as the control parameter. In step one, a constant stress or torque is applied. In step two, the stress/torque is removed. This provides a measurement of stiffness by plotting the movement of the vane (in radians) against time. Less stiff materials have more movement. By removing stress/torque in step two, it is possible to get an indication of the degree of elastic behavior; more elastic 32

|

www.adhesivesmag.com

The examples presented here serve to provide a sense of a controlled stress rheometer’s capabilities. The important point to keep in mind is that this type of instrument operates in both controlled stress and controlled rate modes. When testing adhesive materials, this dual capability is vital to the range of necessary rheological tests. The shift to the use of controlled stress instrumentation is a logical step toward ensuring that R&D and QC labs operate at peak efficiency. For additional information, contact Brookfield Engineering Laboratories, Inc. at 11 Commerce Blvd., Middleboro, MA 02346; phone (800) 628-8139; fax (508) 9466262; email the author at [email protected]; or visit www. brookfieldengineering.com.

October 2011

Passing the TORCH Tape industry icon John Johnston looks to the future.

By Joe Mausar, Director of Marketing, Chemsultants International Inc. John Johnston (left) and Dave McCann working with the PMA-1000.

ohn Johnston was born in England in 1925, the same year Richard Drew introduced masking tape to the world. Essentially, Johnston was born in the birth year of industrial tape, and his life would be forever intertwined with the development and testing of pressure-sensitive adhesive (PSA) tape and the tape industry.

J

EARLY EXPERIENCE In early 1950, Johnston unwittingly entered into what would become his lifetime career path when he joined Smith & Nephew as a laboratory technician. In his new job, John did it all—he tested incoming raw materials, performed quality control tests on industrial and medical tapes, and even produced some of Smith & Nephew’s small-volume products (e.g., diachylon bandages). J o h n r e c e i v e d a b a c h e l o r ’s o f science degree in 1958 with majors in chemistry, physics, and pure and applied mathematics. He moved to the U.S. and joined Arno Adhesive Tapes in October 2011

Michigan City, IN, where he began as research chemist. He expanded Arno’s line of adhesive tapes to include a full spectrum of tape types and eventually became vice president of research, development, and technical operations. Johnston later moved to the Johnson & Johnson facility in Chicago, where he was director of technical operations until the company chose to consolidate its operations and closed the Chicago facility. Johnston then joined Tuck Tape in New Rochelle, NY, as the director of research and development. After Tuck was acquired by tesa tape 12 years later, John spent six more years of his career as the director of applications engineering for tesa, supporting R&D, marketing and customers.

PSTC INVOLVEMENT In the early 1960s, John became involved with the fledgling Pressure Sensitive Tape Council. (PSTC was established in 1953.) He has been an active member of PSTC ever since, and has served on its committees as the

council’s technical advisor and consultant for over 15 years. He is currently the technical consultant emeritus for the PSTC. Presented by Johnston in 1973, the very first PSTC technical paper (“Another Look at Peel Adhesion”) set the stage for all future PSTC technical conferences. He chaired the first PSTC conference on hot-melt PSA tape systems in the U.S. in 1975. Johnston served as permanent co-chair for the annual PSTC Technical Conference for 15 years. He presented the first training session on PSA tape technology offered by PSTC at the first world conference on adhesive tapes in 1992. Over the years, John has also presented a number of technical papers for PSTC, including “Hot-Melt Pressure-Sensitive Adhesives,” “Practical Aspects of Formulating and Processing, Tack,” “The History of the Adhesive Tape Industry” and “Alternate Methods of Testing Pressure-Sensitive Adhesive Tapes.” Adhesives & Sealants Industry

|

33

PASSING THE TORCH Johnston, Mike May and Berry Decker talking through an adhesive problem.

industry and has been active with all PSTC technical committees. He is also a member of the PSTC training faculty and still consults with industry companies. It is fitting that it will be to Serra that Johnston will turn over his entire library when he finally decides to slow down.

SHARING PRACTICAL KNOWLEDGE

In 2000, the PSTC published Johnston’s book, Pressure-Sensitive Adhesive Tapes: A Guide to their Function, Design, Manufacture and Use. The widely recognized volume is essential for those in the tape industry and includes information on how PSAs work, PSA formulations, tape backings, tape design, and tape testing. “It is to the vast majority of others who daily keep the adhesive tape industry alive that this book is both targeted and dedicated,” he says of the book Johnston is distinguished as a true expert in the field of PSA tape technology and testing. In addition to his prolific contributions to the PSTC (and the tape industry in general), he has written technical papers published by the Adhesion Society and TAPPI. He authored the chapter on physical testing of PSAs in the Handbook of Adhesive Technology, edited by Pizzi and Mittel. Johnston has also spoken at numerous industry technical conferences on the fundamentals, manufacturing, testing of and problem solving related to PSA tapes. During his 61+ years in the pressuresensitive tape industry, Johnston has worked with “every type of pressuresensitive adhesive system, every industry, consumer and medical group of tapes, every conventional manufacturing process and every related test method,” he says. He has designed numerous types of adhesive tapes by taking them from an initial concept through product development, manufacturing scale-up and 34

|

www.adhesivesmag.com

onto full production. Johnston has also designed several unique test methods and carried out fundamental research into the nature and behavior of PSA systems.

A TROVE OF INFORMATION At 85 years of age, Johnston shows little evidence of slowing down and absolutely no sign of losing his passion for the subject of his life’s work—PSA tape. For the past several years, he has been most interested in how to “pass the torch” of PSA tape and testing technology knowledge to others who match his passion and intensity. “As an industry, we can’t forget or lose sight of the accomplishments and knowledge compiled by industry giants like Carl Dahlquist and others,” he says. As one of those industry giants, Johnston has much in the way of accomplishments and knowledge to share. The first step in passing the torch was for Johnston to find someone in the tape industry who would give a home to, and find a continuing use for, the tremendous amount of data and information on pressure-sensitive tape that he had compiled during his career. The data includes his original research notes, industry information, product information, technology and patent information, published papers and articles, ideas on PSA testing, and much more. Enter Jerry Serra, the current technical advisor for the PSTC. He retired from Berry Plastics Corp. and its subsidiaries after 30+ years of service in the tape

What about all the technical knowledge and tape testing experience Johnston keeps in his very sharp mind? He thinks he may have found a new way to pass that particular torch. Dave McCann, director of R&D at Chemsultants International, began discussing and collaborating on a paper with Johnston in July 2010. McCann was in the process of completing research and writing a draft of the paper on alternate pressure-sensitive tape test methods for presentation at the 2011 PSTC Technical Conference. He was certain that it was an opportune time to bounce some ideas off Johnston to make certain that he was on the right track. Johnston was more than happy to travel to Chemsultants to discuss the project with McCann. However, as usual, Johnston ended up doing so much more. Johnston spent nearly two days at the Chemsultants facility in Mentor, Ohio, to work with McCann on a variety of testing methodologies that could evaluate situations where PSA tape products are expected to withstand very small stresses over a long period of time—especially where standard speeds or static test methods may not define the performance of the tape very well. The goal of the work was to employ small stresses (low weight or force) and/or very slow rates (such as 0.02 in./min) to reveal differences in the product performance or potential causes of product issues that may not be apparent when employing standard PSA test methods.

TESTING PEEL ADHESION When testing peel adhesion, the angle of peel usually determines which type of stress is applied to the adhesive. In 90° peel tests, the tensile modulus is revealed while all other angles of peel are a blend of tensile and shear modulus. To test the liquid properties of the adhesive in a slow deformation, it is necessary to keep the adhesive test area a constant (such as is done in shear testing). The issue with gathering tensile modulus information in a standard 90° peel test is that the area being tested is constantly changing as the peel front October 2011

progresses. In order to clearly understand the tensile behavior under slow strain, Johnston and McCann needed to change the geometry of the test to use a set area of the adhesive under test. Johnston suggested looking at the butt tensile test, which he developed in 1968. Some of the work they did to evaluate low stress/slow rate PSA deformation was completed using a probe material analyzer (ChemInstruments PMA-1000). The unit was helpful in performing tests on a variety of PSAs due to the ability to program both low forces and very slow speeds into the test protocols. In addition, they performed static peel adhesion and dynamic shear test methods on other ChemInstruments test units. McCann and Johnston initially looked at three test configurations for butt tensile tests: a metal probe brought into contact with the adhesive surface on a flat plate; a rectangular, flat metal probe with the adhesive tape wrapped around the panel and secured, then brought into contact with a test surface; and two rectangular, flat-faced panels with adhesive tape wrapped around both panels, brought together adhesive-to-adhesive. With all three configurations, the surfaces are brought together for a set time and pressure to allow the adhesive and test surface (or other layer of adhesive) to deform and bond well. They decided on the third configuration for much of their testing, which was done at a very slow rate (in the range of 0.01–0.02 in./min). As the adhesive is put under strain during butt tensile testing, it is typical for visible tendrils to be formed as the polymer chains are pulled (see Figure 1). On one sample that Johnston and McCann evaluated, the initial peak and the sharpness of the slope indicated more of the elastic component of the adhesive. The area under the curve gave them the total work done in separating and stretching the adhesive layer. The length of the tail indicated the liquid component of the adhesive. When an adhesive is crosslinked, as in this case, a secondary peak will appear; the peak becomes more predominant with increased crosslinking. The butt tensile test provides a graphic test result with much more information than the single point determined by the standard static shear test (see Figure 2).

ADDITIONAL PROJECTS Johnston also spent a good deal of time during the two days teaching and working with other members of the Chemsultants October 2011

Figure 1. Butt Tensile Test, Adhesive to Panel

Figure 2. Butt Tensile Graph

technical team. Testing project leader Cheryl Saqqa had also been working with McCann on the issue of testing very small stresses over a long period of time. Johnston spent time with Saqqa discussing the similarities and differences in the test results, as well as information provided by static shear vs. dynamic shear testing. Not only was the information relevant to the PSTC paper, but it also gave Saqqa a new perspective on the impact of small forces and how they actually generate levels of adhesive debonding over time. She said this is information will be very useful in her day-to-day adhesive testing work at Chemsultants. Johnston didn’t limit his teaching and “passing the torch” opportunity only to the issue of testing PSA tapes. He made time to talk to Berry Decker,

Ph.D., technical project manager, and Mike May, development chemist, of the Chemsultants Product Development team. Both are involved in projects for clients who are interested in developing new products, reformulating adhesives with alternate raw materials or simply modifying an existing product to address performance issues or problems. Johnston once created 18 new PSA tape products in 18 months, so he is the ideal mentor to provide insight and guidance on the product development process, adhesive formulations, raw materials selection and product performance problem solving— the very issues Decker and May were facing. As usual, Johnston had a great deal of information and suggestions to pass along, proving that he has seen and done it all over the past 61+ years. Adhesives & Sealants Industry

|

35

PASSING THE TORCH FINAL CONSIDERATIONS

Johnston and Cheryl Saqqa discussing shear tests.

Johnston spent a considerable amount of time with the Chemsultants staff, both in the lab performing tests and in discussions about testing, adhesive formulation and performance. He said he saw in McCann, Saqqa, Decker and May “a fire in the belly, a passion for what they are doing” that he says is unfortunately becoming rare these days. According to McCann, the Chemsultants team “learned a lot and has an even greater respect for one of the giants of the tape industry than they did before.” John Johnston found a great way to pass the torch to a very receptive group, and Chemsultants has found a new partner to further increase the level of the PSA tape technical and testing expertise the company brings to the market. It is a winwin situation for everyone. For more information, contact Chemsultants International at 9079 Tyler Blvd., Mentor, OH 44060; phone (440) 9743080; fax (440) 974-3081; email [email protected]; or visit www.chemsultants.com.

36

|

www.adhesivesmag.com

October 2011

CASE STUDY

structural adhesives for bonding the molded 22.5-sq-ft GRP sections together, as well as the sections to the steel frames that are used to mechanically fix the sections to vertical steel pillars on the hotel exterior.

Miraplas factory. The nine elliptical sections were made from eight individual GRP pieces bonded together with Crestomer structural adhesives. A metal clamping frame was specially designed by Miraplas to hold all the parts in position during bonding. The most challenging aspect of the architect’s design was the production of the nine large curved triangular and elliptical sections. It proved most cost effective to produce these sections by making separately molded, 5-mm-thick GRP laminate parts and bonding them together. All the GRP parts were produced using an isophthalic resin, three layers of glass matting and an isophthalic gelcoat. Once molded, the eight separate GRP parts for each triangular section were accurately positioned in the metal clamping frame and bonded together. Crystic Crestomer 1152PA structural adhesive was applied using a pneumatic gun. The steel frames for mechanically fixing the GRP sections to the hotel wall were also bonded into place with Crystic Crestomer 1152PA. In some confined areas, hand guns with cartridges of Crestomer Advantage 30 were used. Miraplas, which has a purposebuilt, 44,000-sq-m composites molding factory located in Monforte del Cid in the south of Spain, has traditionally specialized in manufacturing large GRP tanks and related parts used in waste water treatment, water purification and desalination plants. For this hotel project, most of the GRP parts manufactured by Miraplas were produced by resin transfer molding (RTM) light closed molding; others were produced by hand layup. With the technical assistance of Jose Manuel Bey Garcia, an independent specialist consultant in RTM processing and the appointed hotel project technical advisor, the company has expanded its manufacturing capabilities in RTM closed molding over the last 18 months. Miraplas can now fabricate a wider variety of large complex GRP shapes for industrial and building and construction applications, such as doors, tank covers, curved cladding, cylindrical-shaped parts, and wind generator blades.

PROJECT IMPLEMENTATION

A GUARANTEED BOND

The first phase of this hotel refurbishment project was carried out in the

Crystic Crestomer adhesives, manufactured by Scott Bader, are GRP struc-

TAKING SHAPE A new architectural hotel façade designed in gel-coated fiberglass takes shape with Crystic Crestomer structural adhesives.

he exterior of the renamed Hotel Riviera in Benidorm, Spain, was recently refurbished and given a modern new look by Spanish architect Vicente Peidró. The new facade was produced in white gel-coated fiberglass (GRP) by Miraplas S.L., which molded the triangular and elliptical GRP architectural shapes. The assembly and construction of the new facade used Crystic Crestomer

T

October 2011

Adhesives & Sealants Industry

|

37

CASE STUDY (Right) Crystic Crestomer structural adhesives were applied using a combination of 380-ml cartridge handguns and pneumatic hand guns to improve production efficiency.

(Below) The eight GRP molded parts for the triangular sections were positioned in a specially made metal clamping frame for holding the newly bonded sections together until the structural adhesive cured.

CONSULTING BY “DR. DAVE” Adhesives and Sealants-Technology, Applications and Markets

Dr. Dave Dunn writes the monthly “Questions and Answers” column in Adhesives & Sealants Industry magazine, and is a unique source of both technical and management consulting for the adhesives and sealants industry. Technical Consulting • Formulation advice • Sourcing information • New developments • Application development • Application troubleshooting • Problem solving Market Research • Opportunity analysis • Customer surveys • Mergers and acquisitions • New developments • Market analysis • Industry structure • Competitive intelligence • Key trends

38

|

Technology Focus • Anaerobics • Cyanoacrylates • Reactive acrylics • Epoxies • Hot melts • Gasketing Market Focus • Industrial • Automotive OEM • Automotive aftermarket • Medical • Construction Management Consulting Innovation can be planned and managed to meet the strategic goals of a company. We have concentrated on integrating the R&D functions of companies into their strategic plans and putting systems in place to continuously measure the effectiveness of investments in R&D.

www.adhesivesmag.com

About the principal… Dr. Dave Dunn is President of F.L.D. Enterprises, which is located near Akron, Ohio, USA. He is a former Vice President and Director of Loctite Corporation and has consulted for many adhesives and sealants manufacturers and users in both North America and Europe. He is the author of several books and many articles, including the recent book Adhesives and Sealants-Technology, Applications and Markets, published by Rapra Technology Ltd. (www.polymer-books.com).

tural adhesives that have proven to be successful in a variety of building and construction applications, including cladding panels on bridges, as well as in many fiberglass marine applications in both hulls and decks. Reliable, longterm structural bonding of composite and metal substrates is achievable provided the recommended surface preparation is carried out prior to bonding. “Having used Crystic Crestomer adhesives for many years on several other projects, I was able to recommend their use for this project with great confidence that they will provide a guaranteed, reliable long-term bonding performance,” said Bey Garcia. In this type of application, bonding also helps to significantly reduce the overall weight of the final GRP section while offering additional benefits in pro duction efficiency, particularly when using pneumatic application guns instead of 380-ml cartridge hand guns where possible for larger sections. For more information visit www.scottbader.com/ adhesives or www.miraplas.com.

ABOUT SCOTT BADER Established in 1921, Scott Bader is a £180 million (approximately $288 million) multinational chemical company that employs 560 people worldwide. It is a common trusteeship company with no external shareholders and a

F.L.D. Enterprises Inc. 242 Trails End Aurora OH 44202

strong commitment to supporting its customers, workforce and the environment. Scott Bader’s headquarters in the UK features purpose-built, state-of-the-art technical facilities

Tel. 330-562-2930 FAX 330-247-1690 e-mail [email protected] web site www.fldenterprises.com

that accommodate R&D and complete evaluation, testing, and application support. The company also has manufacturing facilities in the UK, France, Croatia, the Middle East and South Africa.

October 2011

ADVANCING ADHESIVES

MACTAC SUPPLIES PRESSURESENSITIVE ADHESIVE LABEL FOR USPS WEDDING STAMP o a future bride and groom, every wedding planning detail is important, including the stamps on announcements, RSVP envelopes, thankyou notes and other letters of correspondence. To that end, the U.S. Postal Service (USPS) has introduced the Wedding Roses commemorative stamp, for which MACtac ® supplied the pressure-sensitive adhesive label materials. The stamp was released as part of the USPS’ “Weddings” series and features a photo of two white roses laid atop an invitation with a white ribbon in the background. The stamp was designed by Ethel Kessler of Bethesda, MD, and the photo was taken by Renee Comet of Washington, DC. “To most engaged couples, especially brides-to-be, planning a wedding is an exciting process consisting of several steps of intricate, detailed planning— from the flowers chosen to the stamps used on the invitations—that culminates into one joyous occasion,” said Allison Hazel, marketing manager for MACtac Printing Products. “Knowing MACtac’s label stock is the solution depended on to deliver messages of love, joy and happiness while adding a unique touch to wedding correspondence is very pleasing.” MACtac also supplied the pressuresensitive adhesive label material for the Wedding Rings stamp issued in 2009 as part of the “Weddings” series. The company has been a qualified supplier for USPS stamps for more than seven years, providing materials for a number of pressure-sensitive stamps.

T

Copyright © 2011 USPS. Used with permission. All rights reserved.

ABOUT MACTAC MACtac is a leading global supplier of pressure-sensitive adhesives. Founded on personal service, technical support, quality assurance, custom capabilities and supply chain efficiency, MACtac is dedicated to providing superior quality to its customers. Headquartered in Stow, Ohio, MACtac is a subsidiary of the Bemis Co. Inc., the largest flexible packaging supplier in North America. For more information, visit www.MACtac.com.

October 2011

Adhesives & Sealants Industry

|

39

WHAT’S NEW FLEXCON

FORMULATED ADHESIVES

POLYIMIDE FILMS

CORTEC SEALER

MCI®-2018 V/O is a higher viscosity version of the company’s MCI-2018 sealer for vertical and overhead applications. This 100% active silane line of water repellants works by chemically reacting with concrete surfaces to form a strong bond with the substrate. The product creates a hydrophobic layer that repels water and keeps chlorides out without affecting the moisture vapor transmission of the concrete. The sealer can be applied via spray, brush or roller. The increased viscosity of the sealer reportedly makes it easy to apply to bridge supports, garage pillars, or building walls without wasting product through spillage. Web: www.cortecvci.com

THERMLfilm® HT™ is a new advanced line of high-temperature polyimide films reportedly able to withstand the fluctuating temperatures, abrasion and chemicals inherent in the printed circuit board (PCB) manufacturing process. The new product line will be available worldwide to manufacturers that need high-density barcode and alphanumeric PCB labels, including military contractors and manufacturers of electronics, aerospace, and automotive goods. Web: www.flexcon.com

ELLSWORTH ADHESIVES SOLAR CONFORMAL COATINGS

HumiSeal UV40 solar conformal coatings have been added to this company’s product line. The coatings are designed to protect photovoltaic (PV) cells, particularly concentrator photovoltaic cells (CPV). The coatings are engineered to stabilize for prolonged exposure to sunlight so that they do not discolor or degrade over time. In addition, the coatings meet SAEJ-1960 and QUV accelerated age testing. The new technology can provide multiple advantages, including being much smaller and providing lower costs and higher efficiencies than standard PV cells. Web: www.ellsworth.com

Series 540 Sealant Tester Computer Controlled Test Frame

• Designed to perform reliable cyclic testing of sealants, adhesives, and coating to various specifications. • Ask about the optional heat/cool chamber with control system! • PC with Windows ™ based software.

HENKEL EPOXY ADHESIVE

To simplify silicone ingot bonding and protect against wafer breakage, this company has introduced Loctite® 3382™, a water-debondable epoxy adhesive that can reportedly provide excellent bond strength to both silicon and the glass and metal mounting substrates used during the ingot sawing process. The adhesive can replace traditional epoxies that require caustic acids for debonding. It reportedly breaks down easily on exposure to hot water, eliminating corrosive debonding solutions and minimizing the silicon waste that occurs during the wafer cleaning process. It is pink when cured, so it is easy to distinguish from the silicon ingot and the metal and glass mounting substrates during visual inspections. Dispensable using meter-mix equipment, 3382 is packaged in cartridges, pails and drums. The adhesive reportedly emits no caustic odor, will not corrode equipment, and is fully compatible with current wafer cleaning solutions and processes. Web: www.henkel.com/solar

screen shot of software

MAPEI Applied Testing Systems, Inc. has been supplying quality test equipment for the industry for more than 40 years. Call one of our sales engineers today to set up your custom model or to request a catalog.

(724) 283-1212 www.atspa.com [email protected]

Series 510 and 520 horizontal sealant testers also available! 40

|

GROUT MAXIMIZER AND COLORANT

Two new products can reportedly help property owners maintain and update the grout joints in their tile. Grout Maximizer is a premium latexbased additive for mixing with the company’s Keracolor™ S Portlandcement-based grout to increase resistance to water- and oil-based stains. Grout Refresh is reportedly a low-cost way to freshen up dingy grout lines. The polymer-modified colorant allows the user to change or refresh grout colors and seal the joints at the same time. Available in 36 colors, it can reportedly revitalize the look of an older tile installation. Web: www.mapei.com

www.adhesivesmag.com

ASI12064Applied.indd 1

October 2011 10/24/06 9:52:42 AM

3M SPRAY ADHESIVES

This company’s Industrial Adhesives and Tapes Division has launched new low-VOC aerosol spray adhesives with an up to 50% reduction of VOCs, giving customers more “future friendly” adhesive options that help them meet air quality and environmental goals. All of the 3M Low VOC Spray Adhesive products are GREENGUARD Children and Schools Certified(SM), a product certification recognizing lowemitting building materials and other products used in environments where children and other sensitive populations spend extended periods of time. Web: www.3m.com/lowVOCaerosols

Due to its low-density chemistry, GreenMelt can provide a 10% savings in adhesive usage at the same volume of application as comparable conventional products, making it a more sustainable and cost-effective adhesive solution. Phone: (847) 841-7002 Web: www.wisdom.com

EQUIPMENT

WACKER SILICONE ENCAPSULANT

A new silicone encapsulant for the solar industry is available that can enable flexible thin-film modules to be laminated cost effectively using rollto-roll processing. Marketed under the trade name ELASTOSIL® Solar 2200, this new product is transparent, pourable and non-corrosive. It vulcanizes rapidly at elevated temperature and reportedly features outstanding adhesive properties. In its cured state, it can provide all types of thin-film solar cells with effective long-term protection from chemical and mechanical stresses. Web: www.wacker.com

WISDOM ADHESIVES SUSTAINABLE HOT-MELT ADHESIVE

This company has released GreenMelt™, the latest product in the GreenBond Sustainable Adhesives product line. The new adhesive is reportedly an innovative high-performance packaging and paper converting hot-melt adhesive that can provide excellent adhesion, runnability, and mileage.

CHARLES ROSS & SON CO. PLANETARY DUAL DISPERSER

The planetary dual disperser (PDDM) is reportedly ideal for the powerful mixing of high-viscosity applications requiring ultra-fine dispersion quality. The PDDM features four agitators—two planetary stirrers and two high-speed shafts—all rotating on their own axes while orbiting the mix vessel on a common axis. Pictured is a 40-gal model equipped with built-in vacuum pump assembly for operation up to 29.5” Hg. The two saw-tooth blades on each high-speed shaft provide intensive shearing action, reportedly promoting solids dispersion and particle size reduction. The planetary stirrers continually turn over batch

With a MobileTag go from Print to Web

Simply snap a photo of the mobile tag with your Smartphone, and you can conveniently go from a page in our magazine to a webpage. October 2011

Coming January 2011

Adhesives & Sealants Industry

|

41

WHAT’S NEW material, help feed fresh product to the highspeed blades and can facilitate uniform temperature throughout the mix zone. Sidewall and bottom scrapers can also be installed to allow heat transfer between the vessel jacket and batch material. Shear levels and flow patterns in the PDDM can be fine-tuned because the stirrers and dispersers are independently driven and controlled. Solids are incorporated into viscous bulk material, and stubborn agglomerates can be dispersed regardless of product flow characteristics. Phone: (800) 243-ROSS Web: www.mixers.com

DYMAX RADIOMETER

The ACCU-CAL™ 150 is reportedly a simple-to-operate radiometer that offers repeatable measurement of UV light, which simplifies both the validation and monitoring of a UV light-curing process. The instrument can measure UV light up to 10 W/ cm2 emitted from stationary light-curing flood lamps or lamps used in conveyorized processes. It can be used to determine intensity (measured in mW/cm 2) or total energy as derived from intensity and exposure time (measured in mJ/cm 2). The use of radiometers in application processes is critical to ensure that any changes to the properties of curing energy are identified. Radiometers establish process parameters and, when maintained, help ensure consistent production quality, which results in reduced scrap and increased throughput. Web: www.dymax.com

precision and eliminates the need for a servo drive motor or material flow meters in a dispensing system. Web: www.SealantEquipment.com/PSD

RESOURCES ASHLAND RELAUNCHED WEBSITE

A set of new homepage graphics was recently added to this website, adding several more entry points to key content areas. Relaunched on Feb. 25, the site has recorded more than 380,000 visits and more than 1.25 million page views. The number of returning visitors averages more than 20,000 a month. Web: www.ashland.com

VISCOMETER CATALOG

A new, 24-page “Process Control Viscometer Catalog” is now available. The first section of the catalog presents answers to basic questions, including “Why measure viscosity in-line?” and “Why choose Brookfield?” It also includes a list of typical questions to be considered when choosing a process viscometer. Web: www.brookfieldengineering.com

POLYURETHANES MARKET SURVEY

DISPENSING SYSTEM

This company’s new pneumatic servo dispensing (PSD) system is a positive rod displacement metering system that reportedly combines the cost efficiency of a pneumatic drive motor with the controlling accuracy of a servo drive motor. The PSD system uses a positive rod displacement metering principle for maximum dispensing 42

|

www.adhesivesmag.com

REDESIGNED WEBSITE

This company, a business group of The Dow Chemical Co., has launched a newly redesigned website that provides advanced functionality on a global scale while highlighting local resources. Reportedly giving site visitors convenient and quick access to products, experts, and facilities specific to their needs, the site can deliver comprehensive information and local expertise to users based on their interests and geographic location. Web: www.dowmicrobialcontrol.com

FISNAR® INC. VIDEO TRIAL SERVICE

This company recently announced it is offering free video trials. The service provides an opportunity for customers to program and confirm an automated dispensing application without having to purchase equipment or allocate engineering time to assure the investment. The company’s engineers will reportedly help select the right robot for customer applications and provide integration advice with this service. Only shipping costs will be charged to the customer’s account. Web: www.fisnar.com/video

BROOKFIELD

CENTER FOR THE POLYURETHANES INDUSTRY (CPI)

SEALANT EQUIPMENT & ENGINEERING

DOW MICROBIAL CONTROL

This branch of the American Chemistry Council has announced the availability of its 2010 End-Use Market Survey on the Polyurethanes Industry in the U.S., Canada and Mexico. The 2010 end-use survey can be ordered in electronic or hard copies. Developed by IAL Consultants on behalf of CPI, the survey comprises more than 300 pages, 150 tables, and 95 charts and diagrams, providing a detailed analysis of the major end-use markets for polyurethane in North America for 2010. Web: http://polyurethane.org/s_api/sec. asp?CID=1921&DID=12004

DAILY UPDATES For all of the latest industry news and information, visit us online at www.adhesivesmag.com.

P R O D U C T & L I T E R AT U R E

Showcase Leading the Way in 2K New catalog from Nordson EFD offers the complete line of TAH systems for meter mix and cartridge applications for two-component adhesives, including mixers, cartridges, dispensers, and valves. For a free copy, visit www.nordsonefd.com/ads/asi-1010.

October 2011

P R I VAT E L A B E L I N G S E R V I C E S

SERVICES MARKETPLACE D I S T R I B U T I O N S E RV I C E S Heigl Technologies ...................................................................................... 43

L A B O R AT O R Y & T E S T I N G S E R V I C E S Chemsultants International Network ............................................................ 44 Delsen Testing Laboratories .......................................................................... 44

M A N U FA C T U R I N G & P R O C E S S I N G S E R V I C E S Resin Lab .................................................................................................... 44

P R I VAT E L A B E L I N G S E R V I C E S

Seeking Private Label Business • Seeking new Private Label/toll manufacturing for solvent-free adhesives, sealants/coatings. • Leader in North American polyether technology • Multiple packaging configurations • Standard and custom formulations • Excellent turnaround w/newly expanded capacities • Dedicated R&D facility [email protected] 800-826-1681 • www.chemlinkinc.com

ChemLink.................................................................................................... 43 Polymeric Systems, Inc. ............................................................................... 44 The Ruscoe Company .................................................................................. 43asi0211class-chemlink.indd This index is a feature maintained for the convenience of the advertiser. It is not part of the advertiser’s contract, and ASI assumes no responsibility for its accuracy.

D I S T R I B U T I O N S E RV I C E S

CUSTOM DISTRIBUTION SERVICES

Incredible VOC Compliant Adhesives and Sealants From Ruscoe 1

1/5/11 9:33 AM

The Ruscoe Company has been serving international industry with Pliobond adhesive and a host of other indu ppremium, unparalleled adhesive and sealant pproducts since 1947. W We have consistently upgraded our formulas tto match customer requirements, while simulttaneously meeting or exceeding governmental rregulations.

Heigl Adhesives will provide distribution services tailored to your manufacturing needs. *Epoxies *Hot Melts *Cyanacrylates *Anaerobics *Urethanes *Silicones

*PUR Hotmelt *Methacrylates *Dispensing *Needles and Syringes *UV’s *Potting Compounds

D Depending on volume, we can private label our pproducts or package ackage a customer’s formula.

Please call for a proposal today! p.800.401.1441 www.heigladhesive.com f.952.943.1255 [email protected]

asi1010SMS-Heigl.indd 1

W We’re at the cutting edge of innovation and currrently offer our customers a plethora of marketing aand distribution options.

C C compliant, Consider: VOC ppremium products ducts in your ccompany’s name. ame. FFor additional ial information, and a confidential review of your requirements,, oe. please E-Mail: Sales@Ruscoe. com or call Paul MIchalec, President, at 330.253.8148

9/7/10 10:28:37 AM

Submit Classified Ads Online Visit www.adhesivesmag.com and click on “Classified Ads” to place your ad today!

Adhesives & Sealants Products Proven Professionally—Everyday

October 2011

Adhesives & Sealants Industry

|

43

SERVICES MARKETPLACE P R I VAT E L A B E L I N G S E R V I C E S

M A N U FA C T U R I N G & P R O C E S S I N G S E R V I C E S

EXPERTS IN CUSTOM FORMULATION & TOLL MANUFACTURING We specialize in custom formulation of adhesives & encapsulants for electronic & general product assembly applications. t
'VMMZ
TUBòFE

FRVJQQFE

BOBMZUJDBM
MBC
GPS
UFDIOJDBM
TVQQPSU t
'BTU
SFTQPOTF
BOE
'3&&
JOJUJBM
TBNQMFT t
$BQBCMF
PG
QSPWJEJOH
CBUDIFT
GSPN
POF
RVBSU
UP
UPUFT t
&YQFSU
EPDVNFOUBUJPO

JODMVEJOH
$0"T
5%4T


.4%4T
()4

t
2VBMJUZ
FOTVSFE
XJUI
*40
RVBMJUZ
TZTUFN t
.BOZ
TQFDJBMUZ
QBDLBHJOH

PQUJPOT
BWBJMBCMF t
'VMM
QSPUFDUJPO
PG
JOUFMMFDUVBM

QSPQFSUZ
HVBSBOUFFE


1-877-259-1669 www.resinlab.com /
8
.PSTF
%SJWF
(FSNBOUPXO
8*



L A B O R AT O R Y & T E S T I N G S E R V I C E S

SPECIALISTS IN TESTING ADVANCED COMPOSITES Q Mechanical Testing Q Thermal Analysis Q Thermal Cycling QElectrical Properties

Q Metallography Q Flammability, Smoke Toxicity and OSU Heat Release

1024 Grand Central Avenue • Glendale, CA 91201 Internet: www.delsen.com • Fax: (818) 247-4537

888-433-5736

g.com

SUBSCRIBE

•

esma

hesiv w.ad • ww

r Use End

ary

Janu

2007

s ts uc rod ro dp oo n/w tio ruc nst co ngg oratin

Incorp

Sept emb

er 2006

• www .adh esiv

esma g.co

m•

try N mis E e h E GR C

ng ing kaagggiin cka acck ndd Pa ng anes siinng ve s peerr ive ceesssssi siv appe hheeessi PPrroocce ardd Pa of Addh Awar st Aw quuiiisst lqu hhllq ah Da TC PSSTTC

44

|

Non Metallic Materials Testing

www.adhesivesmag.com

online

A Adhesives & Sealants Industry iis a FREE magazine serving gglobal manufacturers, fformulators and end users of Don’t forget to sign up to aadhesives and sealants, pressure ASI’s free eNewsletter. ssensitives, and other adhesive/ ssealant products. www.adhesivesmag.com/renewonline October 2011

CLASSIFIEDS

New & Used Equipent

FOR SALE

BUSINESS FOR SALE

Hockmeyer

Equipment Corporation

Adhesive & Sealants manufacturing, packaging, and marketing.

A leader in the grinding and dispersion industries

• • • • • •

A 25 year old company serving industrial OEM and retail markets, directly and through distribution.The company supplies various high end adhesive technologies for structural and non structural applications with well recognized brand names in both industrial and retail markets.They provide engineer or architect specified adhesive formulations, private label opportunities, in bulk or convenience packaging to over 500 OEM customers in a wide range of product assembly markets. The company has niche retail distribution along the entire Atlantic Coast and sees excellent growth opportunities in new markets with very limited competition. The owners are willing to stay on for an appropriate transition period,and may consider creative buy out options. Please respond to adhesives101@ gmail.com.

Immersion Mills Mixers Tank & Tote Washers Particle Size Analysis Dispersers Vessels

Visit Us At: www.hockmeyer.com or Call Us: 252-338-4705

WANTED TO PURCHASE: Used Dispersers & Mixers

.. It’s time.to go green! asi07091Hockmeyer-class.indd 1

5/21/09 9:38:43 AM

‡6SHFLDOO\'HVLJQHG%ODGHDOORZVIRUKLJK HIILFLHQF\JULQGLQJRUGLVSHUVLRQZKLFK VDYHV\RXWLPHDQGHQHUJ\ ‡ 8VLQJ4XLFN%ODGHVGHFUHDVHVWKH QHHGWRXVHDPLOO ‡ :HRIIHU/DERUDWRU\ 3URGXFWLRQEODGHVZLWK VHYHUDOGHVLJQVWRFKRRVHIURP ‡ 6DPHGD\VKLSSLQJPRVWFDVHV

patent pending

BLADES

TM

.NET

Find out more at www.quickblades.net new & used 877.618.8304

High Speed Dispersion Blades

EXECUTIVE SEARCH Specializing in adhesives/sealants industry. Seeking passionate, high-impact professionals for nationwide positions. Send your resume in confidence to: Spencer M. Hermann

SEARCHLIGHT PARTNERS 28052 Camino Capistrano, Suite 209 Laguna Niguel, CA 92677 (949) 429-8813 • [email protected]

USED AND REBUILT MIXING EQUIPMENT World’s largest inventory! • Genuine Ross rebuilt mixers, blenders, dispersers and mills • All original OEM parts • Most come with the same guarantee as our new equipment! Call Ross today!

1-800-243-ROSS www.mixers.com

Subscribe or renew your ASI subscription online. www.subscribeforfree.com October 2011

CUSTOM REPRINTS

If your company was mentioned in ASI, reprints of that article are a great sales tool!

Why Reprints? Distribute them at tradeshows. Mail them to your prospects. Use them in sales presentations.

Call Peg at 614-760-4222 or email: vanwinklep@ bnpmedia.com

Adhesives & Sealants Industry

|

45

ASK

AD INDEX

DR.DAVE

QUESTION: We apply our epoxy adhesives automatically and need to ensure that the adhesive has been mixed correctly and that it has actually been applied to the part. How can we accomplish this, other than having someone actually observe it visually? ANSWER: Epoxy adhesives, which comprise both the adhesive component and the hardener, are usually mixed with a static mixer. It is possible to use and monitor automatic flow controllers on both components of the adhesive. However, the most common way to determine the correct mix ratio is to periodically take a sample of the mixed adhesive and measure its properties, including density, cure speed, bond strength, etc. A few years ago, a major adhesives manufacturer collaborated with an auto company to develop a novel method for controlling the mix ratio of two-part epoxy adhesives. They discovered that the mix ratio can be continuously measured via a tagging system that incorporates microscopic stainless steel-coated glass bubbles in one component of the adhesive. The bubbles are detected by two eddy current sensors integrated into the dispensing equipment. This technique enables 100% knowledge and control of the dispense ratio. A few methods can be used to detect your adhesive on the parts. One standard method is to incorporate a fluorescent agent into the adhesive and use a fluorescence detector to monitor its presence. Photo cells or a camera system can also be effective. If you use a three-dimensional camera system, you can measure the width, height and position of the bead of adhesive. QUESTION: What would you recommend as a general-purpose wood adhesive? ANSWER: There are several types of wood adhesives, though craftsmen tend to refer to these as glues rather than adhesives. The traditional white glues, or carpenters’ glues, usually do a good job, as do tough acrylics or special formulations of cyanoacrylates. One-component polyurethane adhesives have also become popular in recent years. These adhesives have a single component and depend on moisture for curing. The moisture is sometimes available in the wood or the atmosphere, but it is common practice to dampen the surface before applying the adhesive. One has to be careful to use the right amount of adhesive and to clamp the parts, because the adhesive generates foam on curing and tends to expand.

Dr. Dave Dunn is a former vice president and director of Loctite Corp. and has

Accumetric LLC

www.accumetricinc.com

36

Adhesive Packaging Specialties

www.adhesivepackaging.com

Applied Test Systems

www.atspa.com

40

Bayer Material Science LLC

www.bayermaterialsciencenafta.com

39

Brookfield Engineering

www.belusa.com

12

CAS-MI/EAG Labs

www.cas-mi.com

10

Charles Ross & Son Co.

www.mixers.com

15

Chem Show Int’l Exposition

www.chemshow.com

IBC

Conn & Co.

www.connblade.com

11

Connolly Bove Lodge & Hutz LLP

www.cblh.com

Dow Construction Chemicals

www.dowconstructionchemicals.com IFC

Evonik Industries AG

www.evonik.com/adhesives-sealants

21

F.L.D. Enterprises

[email protected]

38

Gorman-Rupp Company

www.GRpumps.com

23

Imass, Inc.

www.imass.com

10

Merlin Packaging Technologies Inc.

www.merlinpackaging.com

13

Nynas

www.nynas.com

BC

Univar USA Inc.

[email protected]

4

Wacker Chemicals Corporation

www.wacker.com

7

Yellow Jacket

www.yellowjacket110.com

9

3

spent many years troubleshooting adhesive and sealant problems in the adhesives, sealants, specialty rubbers, and plastics fields. Questions for publication should be directed to him at 242 Trails End, Aurora, OH 44202; (330) 562-2930;

22

FAX (330) 247-1690; email [email protected]; or visit www.fldenterprises.com. Any views or opinions expressed in this column are those of the author and do not represent those of Adhesives & Sealants Industry, its staff, Editorial Advisory Board or BNP Media.

46

|

www.adhesivesmag.com

This index is a feature maintained for the convenience of the advertiser. It is not part of the advertiser’s contract, and ASI assumes no responsibility for its accuracy.

October 2011

Meet Over 300 Exhibitors…

Don’t Miss the #1 Process Equipment & Technology Event

3V Cogeim TECH Group 3V Glasscoat S.p.A. 3V Green Eagle S.p.A. 3V Mabo s.r.l. 3V Tech Group A-T Controls, Inc. A&B Process Systems Aaliant/Niagara Meters ACE Glass, Inc. ACN Industry Inc. Adhesive Services Company Advance Products & Systems, Inc. Advanced Sonic Processing Systems AGC Chemicals Americas, Inc. AIChE/Wiley Press Air Products and Chemicals, Inc. $LUÀRZ6FLHQFHV&RUS Alar Engineering Corp. $OVWRP3RZHU,QF 5D\PRQG %DUWOHWW6QRZ Operations Altran Solutions American Institute of Chemical Engineers (AIChE) American-Marsh Pumps AMETEK Fluoropolymer Products AMISTCO Separation Products, Inc. Anchor Sales Andritz Separation Inc. Anguil Environmental Systems, Inc. Anticorrosive Equipment Pvt. Ltd. Anton PAAR USA Applied Coating Systems, Inc. ARDE Barinco, Inc. ARI Valve Corporation Arizona Instrument LLC Arkema Inc. Armstrong International, Inc. Artisan Industries Inc. ASTM International Atlantic Scale Co., Inc. B.A.G. Corp. B&P Process Equipment B2B Portales/Carvajal Badger Meter Bedford Reinforced Plastics

Beijer Electronics, Inc. Berndorf Band GmbH Berndorf Belt Technology USA BHS - Filtration Inc. BOERGER, LLC BOLZ-Summix Brinkmann Bronkhorst USA Inc. Brooks Instrument BS&B Safety Systems, L.L.C. Bulk Connection, Inc. Busch, Inc. Buss ChemTech AG Canadian Process Equipment & Control News CANTY, Inc. Carolina Filters, Inc. Case Laboratories, Inc. Cashco, Inc. CAT PUMPS-High Pressure Pumps & Systems CEJN Industrial Corporation Chemglass Life Sciences Chemical Engineering Chemical Engineering Progress Chemical Processing Chemstations Inc. Chemtrol / NIBCO INC. China Industrial Reporter China Petroleum & PetroChemical Equipment Industry Association CMEC International Exhibition Co., Ltd. Contibelt Systems, Inc. Continental Disc Corp. CONTROL Corning Glass 'HOWD&RROLQJ7RZHUV,QF Diamond America Corp. 'LFNRZ3XPS&RPSDQ\ Doncasters Settas S.A. Doyle & Roth Manufacturing Co., Inc. / Eastern Tank Fabricators Dry Link, Inc. DuPont Durr Systems, Inc. '\QDÀRZ(QJLQHHULQJ,QF '\QDPLF)ORZIRUP DynaSep Eagle Pneumatic, Inc.

InCon Processing LLC Industrial Hygiene News Industrial Information Resources, Inc. Industrial Piping, Inc. Industrial Process Products & Technology Inpro/Seal Company Investa Pumps Pvt. Ltd. ITT Corporation / Goulds Pumps, Inc. Jacob Tubing L.P. JACQUET Mid Atlantic, Inc. JDA Global Jenike & Johanson, Inc. Jet-Vac Products John Crane Mechanical Seals Julabo USA, Inc. Eagle Stainless Container Co. JumboSack Corporation K-Patents Inc. EagleBurgmann Kenda Industrial Corporation Mechanical Seals KMA INDUSTRIES, LLC Eastern Tank Fabricators KNF Neuberger, Inc. ecom instruments inc Kopetz Mfg., Inc. (GZDUGV Kriebel Engineered Equipment EGC Plastics Kurimoto, Ltd. (PHU\:LQVORZ6FDOH&R L. J. Star Incorporated Enardo Lamons Enerquip LLC LP FILTER (CHINA) Evonik Degussa Corporation LTB America LLC Exergy, LLC Ludeca, Inc. )HQZDO3URWHFWLRQ6\VWHPV Mach Industrial Group Fike Corporation Marshall Industrial Flexim Americas Corp. Technologies Flexitallic L.P. Melter S.A. de C.V. Flo-Tite, Inc. Meriam Process Technologies Flotronic Pumps Ltd. Mersen USA )ORWWZHJ6HSDUDWLRQ Met-Chem, Inc. Technology, Inc. Mettler Toledo Flow Control Magazine Mettler-Toledo, Inc. Fluid Metering, Inc. Micro Motion Inc. Fluonics Co., Ltd. Micromeritics Flux Pumps Corporation Instrument Corp. Food Processing 0LGZHVFR)LOWHU5HVRXUFHV,QF GEA Barr-Rosin Mokon GEA Filtration GEA Process Engineering Inc. MTH Pumps The Mundy Companies G. Bopp USA Inc. Myers Engineering, Inc. General Pump National Rubber Corp. GIG Karasek GmbH NEI GlasCol Neimenenggu Fufeng Gooch Thermal Biotechnologies Co., Ltd. Systems, Inc. Neutronics, Inc. Grainger NIBCO INC. *UDQG9LHZ0HGLD*URXS NIST-National Institute of (Processing Magazine, Standards & Technology Flow Control Magazine) North American Safety Valve Gulf Publishing / Industries, Inc. Hydrocarbon Processing NovaFlex Industries, Inc. Hangzhou Alkali optek-Danulat, Inc. Pump Co., Ltd. Orival Water Filters Heatec, Inc. OSECO, Inc. Heidolph Heinkel Filtering Systems, Inc. Hielscher USA, Inc. The Hilliard Corporation +RQH\ZHOO+36 Hose Master LLC +RZFR0HWDOV Management Group Hydrocarbon Processing/Gulf Publishing Company IKA Works IKA-Works, Inc.

Outotec P.A. Inc. Particle Sizing Systems PBM, Inc. 3HQQZDOW/LPLWHG Heinkel USA PEP, Plastic Engineered Products, Inc. Petroleo Internacional Pharmaceutical Manufacturing Pharmaceutical Technology Piers PKG Equipment, Inc. Plant Services Plast-O-Matic Valves, Inc. Plate Concepts, Inc. PNP Special Alloys, Inc. Pollution Equipment News POLYTEC GmbH Powder / Bulk Solids 3ULPDU\)ORZ6LJQDO,QF Process Combustion Corp. Processing Magazine PROCESSWest Magazine Protectoseal Company, Vent Division PROTEGO® USA Inc. Pumps and Systems Magazine Purolator Advanced Filtration Putman Media Chemical Processing CONTROL Pharmaceutical Manufacturing Plant Services Food Processing 43RZHU$PHULFD,QF QMC Technologies, Inc. Qsales & Leasing Quality Controls, Inc. R. Baker & Son RACO Manufacturing and Engineering Co., Inc. Readco Kurimoto, LLC Reportero Industrial Reportero Industrial Mexicano Rimbach Publishing, Inc. Industrial Hygiene News Pollution Equipment News RMB Products, Inc. Robatel, Inc. Rosedale Products, Inc. Rotork Controls, Inc. RVT Process Equipment, Inc. Sachin Industries Ltd. SAFELOK - USA, Inc. SAMCO Technologies, Inc. Samuel, Son & Co. SBS Steel Belt Systems USA Schott Glass Schubert & Salzer, Inc.

SEARCH Sefar Inc. Selltis Sentinel Lubricants Sentinel Process Systems Inc. 6KDQGRQJ:HLIDQJ/RQJZHL Industrial Co., Ltd. Shanley Pump & Equipment, Inc. SIHI Pumps Inc. Smart-Hose™ Technologies 6RI¿HULD6HVWHVHVUO Spraying Systems Co. SRI Consulting Steri Technologies, Inc. Stoody Company Supercritical Fluid Technologies, Inc. 6ZDJHORN&RPSDQ\ 6ZLVVÀXLG86$ ,QF Sympatec Inc. Tantaline Inc. Tantec USA LLC Team Industries, Inc. tec5USA, Inc. TELEDYNE Isco, Inc. 7KHUPR6FLHQWL¿F Tiger-Vac, Inc. (USA) Titan Metal Fabricators Todo AB Trumbull Industries, Inc. 7XWKLOO9DFXXP %ORZHU Systems Union Process Inc. United Titanium, Inc. Valve Concepts, Inc. Valve Magazine Valve Manufacturers Association of America Valve Repair Council Vaughan Company, Inc. Veolia Water Solutions & Technologies Vindum Engineering, Inc. Vogelsang USA VTA GmbH Welmon S. De R.L De C.V. The Western States Machine Company Wilden Pump & Engineering Co. World Industrial Reporter Wyssmont Company, Inc.
November 1-3, 2011 
  
 


ork City Conference Partner:

Media Partner:

AlChE Produced and managed by:

Endorsed by:

We may be an oil company, but our real job is to refine your ideas.

Most oil companies see oil as a source of energy, a consumable that vanishes the instant it’s used. We see oil as a tool for creating sustainable value. www.nynas.com