Fats and Oils Handbook
Michael Bockisch Hamburg, Germany
Champaign, Illinois
This book is dedicated to my wife Gudr...
3913 downloads
9393 Views
51MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
Fats and Oils Handbook
Michael Bockisch Hamburg, Germany
Champaign, Illinois
This book is dedicated to my wife Gudrun to whom, in the course of doing this translation, revision, and update, I had to break my promise never to write a book again, and also to my son Benjamin and my daughter Valerie. AOCS Mission Statement To be a forum for the exchange of ideas, information, and experience among those with a professional interest in the science and technology of fats, oils, and related substances in ways that promote personal excellence and provide high standards of quality. AOCS Books and Special Publications Committee E. Perkins, chairperson, University of Illinois, Urbana, Illinois J. Endres, Fort Wayne, Indiana N.A.M. Eskin, University of Manitoba, Winnipeg, Manitoba T. Foglia, USDA-ERRC, Wyndmoor, Pennsylvania L. Johnson, Iowa State University, Ames, Iowa Howard R. Knapp, University of Iowa, Iowa City, Iowa J. Lynn, Edgewater, New Jersey M. Mathias, USDA-CSREES, Washington, D.C. M. Mossoba, Food and Drug Administration, Washington, D.C. G. Nelson, Western Regional Research Center, San Francisco, California F. Orthoefer, Monsanto Co., St. Louis, Missouri M. Pulliam, C&T Quincy Foods, Quincy, Illinois J. Rattray, University of Guelph, Guelph, Ontario A. Sinclair, Royal Melbourne Institute of Technology, Melbourne, Australia G. Szajer, Akzo Chemicals, Dobbs Ferry, New York B. Szuhaj, Central Soya Co., Inc., Fort Wayne, Indiana L. Witting, State College, Pennsylvania Copyright 0 1998 by AOCS Press. All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means without written permission of the publisher. The paper used in this book is acid-free and falls within the guidelines established to ensure permanence and durability.
Library of Congress Cataloging-in-PublicationData Bockisch, Michael. [Nahrungsfette und ole. English] p. cm. Updated and revised translation of the original German work, Nahrungsfette und ole. Includes bibliographical references and index. ISBN 0-935315-82-9 (alk paper) 1. Oils and fats, Edible-Handbooks, manuals, etc. I. Title, TP670.B5713 1998 6 6 5 4 ~ 12 Printed in the United States of America with vegetable oil-based inks. 543 06 05 04
98- 11974 CIP
Preface Oils and fats have been constituents of human nutrition from ancient times. First, they contain the highest level of energy of all components of food; second, they supply essential elements for the body. However, the fundamental reason for their early and varied use was certainly the fact that they contribute to the development of flavor, making dishes tasty and giving them a good, smooth mouth-feel. In the course of his life, a human being living in the industrial nations consumes approximately three tons of fats and oiIs; about half of them are so-called invisible fats, hidden in other food, e.g., sausage and cheese. In the developing countries, the portion of fat in food intake lies far below the amount recommended by the World Health Organization (WHO). This is not due to limited world resources, but rather to problems of local purchasing power as well as logistics and distribution. Cultivation could easily rise considerably faster than the world population. Fats are an important factor in the economy because of their status as basic constituents of nutrition and the large amounts consumed. This becomes apparent in their ranking second in worldwide traded items. For some countries or regions, they represent an indispensable part of the gross national product and a source of foreign currency. Because of the development of new varieties of oil seeds, the areas under cultivation have been extended in the past decades from the earth’s sun belt to regions of temperate climate, which now deliver a substantial part of that crop. This has led to a shift in economic interests. ‘some of these factors will be discussed in this book to illustrate the large correlations that exist. This book will acknowledge the importance of fats and oils and give a survey of today’s state of the art in technology. Even when considering a topic that is relatively limited in scope, it is impossible for a single person to obtain more than a general view of the field. It follows that to give an adequate description, it is vital to have recourse to the knowledge base established over the years by the publications of many scientists and practitioners. I would like to express my thanks to all those colleagues whose findings and experiences formed a basis for my studies. Technology is not an end in itself. It is justified when it makes it possible to improve the foodstuff offered by nature in whatever way, whether in amount, cost, quality or other criteria that make possible its use or adaptation to our way of life today. To pursue food technology without knowing the “raw material” would mean working in a vacuum and performing “l’arrpour I’m.” In this book, great attention was thus paid to describing the sources of the oils and fats, and also the fats and oils themselves in such a way that the technological steps be well-founded and the purpose clear. Since the industrial revolution, there has been a great boom in the industry of edible fats and oils. The processes that remain in use today are founded on basic findings from approximately 100 years ago. Much has been improved since that time, and many facts already known are exploited today only on the basis of improved technology. Technology will continue to develop in parallel with man’s changing attitude to it. In the broadest sense, progress in biological science and biotechnology contributes to this. Because biotechnological processes are reputed to be more natural V
vi
Preface
than chemical ones, there is an attempt to use enzymic reactions for fat technology. Much more far-reaching effects can be achieved by cultivation or the application of gene technology. Plants containing fats and oils in a desired composition, structure and quality render superfluous certain steps of treatment or modifications. To date, agriculture has not yet fully realized the potential offered by the cultivation of tailormade plants for certain purposes, as opposed to mass cultivation. In addition to these aspects, the development of machines and equipment leading to a more responsible way of dealing with raw materials and the environment continues. New processes of refining are confined mainly to physical modes of operation and protection of energy and water resources, in keeping with the spirit of the period and the desire to keep costs low. The manufacturers of such equipment are constantly engaged in new and further developments. Here, I would like to thank the companies that are mentioned subsequent to the bibliography for their support in providing pictures and information. This book will survey the raw materials predominantly employed and the spectrum of processes used today. Man’s ability to absorb information visually, i.e., via pictures, is many times greater than through the other senses or through transposition from language. A diagram or figure conveys more than a thousand words. To impart information quickly and efficiently, a focus of importance in this book was the explanation of technological steps in the form of graphs, a form of presentation that offers the reader a quick orientation and conveys a general view. Sufficient detail is offered to highlight the critical points without obscuring the presentation of essential information. In that sense, this book can be considered a sort of picture-bookhopefully, in a good sense. Michael Bockisch Vienna, I993
Preface to the English Edition AOCS Press has decided to publish this (originally German) book in English, updated and revised, and I am very grateful for the opportunity to expand its distribution and readership. The book was written primarily for Europe, and especially for Germany; some parts of Chapter 1, in particular, focus on the home situation. These parts have been changed where possible to give a broader picture. However, some figures remain in their original form, describing the situation in Germany. This was the case whenever they were too specific to be changed or when they illustrated certain facts that may well be used as an example for other regions in the world or as representative for the European Union. It is an honor to be able to reach a much wider readership. I translated the book to the best of my ability; however, without the help of my son, Benjamin, who had to do a lot of proofreading, of Ralf Tonn, who assisted me with the translation of Chapter 1, and especially of Iain Gow, Greg Knoll and Michael Gude, who did their very best as co-readers to improve my style, I (or you as the readers) would have been worse off. Both my readers and I owe them our thanks. In the interim between the original German issue and this one, almost half a decade has passed, and some of the trends that could be seen on the horizon have intensified. The skepticism towards any form of technology has increased in some countries, especially Scandinavia and the German-speaking countries, coming very close to hostility at least in some parts of the population. This deepens the gap between the wealthy countries that can afford to reject useful technology and those parts of the world in which technology is urgently needed to feed the increasing and often poor population. It seems that part of today’s fat technology will disappear in Europe or that chemical processes will be replaced by physical ones regarded as more environmentally friendly or by enzymic ones regarded as biological and thus, natural. On the other hand, there is total rejection in some quarters of new technologies such as biotechnology whether the concern is enzymes and their methods of production or genetically modified organisms (GMO). The contradiction between the existence of less technology and the development of new plants that may save some processing steps will be difficult to resolve. The next two to three years will determine where these new developments will be accepted and where they will not. A start was made in 1996 with the introduction of GMO soybeans, with other modified oilseeds following mainly in 1998. Lastly, I hope my readers will follow the advice of the great German poet Wolfgang von Goethe, who said: “Also, we should not deny that we are willing to forgive one or the other typing error in a book because we feel flattered by the fact that we detected it.”
Michael Bockisch Hamburg, 1997
vii
Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v
Chapter 1
The Importance of Fats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1. A History of the Production of Oil and Fat 1.2. Fat in Food and Food’s Raw Materials 1.3. The Economic Importance of Oils and Fats 1.4 Fat in Nutrition 1.5. Fats and Oils in Legislation 1.6. Fats as Technical Raw Materials 1.7. Fats and Oils as a Source of Energy 1.8. New Sources of Raw Materials 1.9. Substitutes for Fat 1.10. References
1
Chapter 2
Composition, Structure, Physical Data, and Chemical Reactions of Fats and Oils and Their Associates . . . . . . . . . . . . . . . .53 2.1. Components of Fats and Oils 2.2. The Structure of Triglycerides 2.3. Physical Characteristics 2.4. Chemical Reactions 2.5. Lipids 2.6. References
Chapter 3
Animal Fats and Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1. Milk Fats 3.2. Rendering Fats 3.3. Marine Oils 3.4. References
121
Chapter 4
Vegetable Fats and Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1. OiVFat-Containing Plants 4.2. Pulp Oils 4.3. Seed Oils 4.4. Nonedible Oils and Fats 4.5. Other Oil Sources 4.6. References
174
Chapter 5
Production of Vegetable Oils and Fats 5.1. Pulp Oils 5.2. Seed Oils and Fats
......................
345
Chapter 6
Modification of Fats and Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1, Application and Combination of Modification Processes 6.2. Fractionation 6.3. Winterization 6.4. Interesterification 6.5. Hardening 6.6. References
446
ix
X
Contents
Chapter 7
Refining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1, Economic Importance of Refining 7.2. Neutralization 7.3. Bleaching 7.4. Deodorization 7.5. Physical Refining 7.6. Energy Consumption and Investment 7.7. Importance of Refining for Removal of Environmental Contaminants 7.8. References
Chapter 8
Fat as, or in, Food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1. Butter 8.2. Margarine 8.3. Edible Fats 8.4. Salad and Frying Oils 8.5. Mayonnaise 8.6, Vegetable Creams, Cream Substitutes 8.7. Peanut Butter 8.8. Margarine and Oils with Medium-Chain Triglycerides 8.9. Monoglycerides and Diglycerides 8.10. References
719
Chapter 9
Analytical Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.1, Acid Number 9.2. Saponification Number 9.3. Iodine Value 9.4. Peroxide Value 9.5. Unsaponifiable Matter 9.6. Water Content 9.7. Phosphorus Content 9.8. Color 9.9. Hexane in Extraction Meal 9.10. Fibers in Extraction Meal 9.1 1. Protein in Extraction Meals 9.12. Ash Content 9.13. Solid Fat Content 9.14. Dilatation 9.15. Lipids Analysis
803
Chapter 10
Conversion Tables and Abbreviations. . . . . . . . . . . . . . . . . . . . . . .
809
Chapter 11
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
813
Chapter 12
Bibliography. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
815
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
819
.613
Chapter 1
The Importance of Fats The importance of fats for humans, animals and plants lies in their high content of energy, which permits the greatest possible storage of energy in the smallest possible amount of food substance. In addition, fats allow humans and animals to consume fat-soluble vitamins and provide them with essential fatty acids, that is, those indispensable fatty acids that their bodies are unable to synthesize themselves. Fats are omnipresent in nature, although in the most diverse quantities. In the human body, they play a decisive role as well, beginning with the nutrition of the infant with breast milk. During the first 5 d, breast milk contains an average of 29.5% fat; from d 6 through 10, the amount is 35.2% and later 45.4% (Macy 1949). In the course of life, a human living in the industrial world satisfies an average of >40% of energy demand with fat. Metabolized in the human body, fats yield 38 kj/g of energy (9 kcal/g). In this exothermic reaction, -2000 mL of oxygen per gram of fat is consumed and -1400 mL of carbon dioxide is produced (Peters and van Slyke 1946). In addition to -63 ton of water, 0.5 ton of alcohol, 8 ton of carbohydrates and 2 ton of proteins, humans consume -3 ton of fat during their lives. The efficiency of fat as foodstuff is very high, because the fat contained in food is almost completely reabsorbed by the body; in the feces (in the course of one’s life -5 ton, plus 30 ton of urine) only 3.3% of lipids can be found (Pimparkar 1961). Thus, fats play an indispensable part in nutrition as supplier of energy, source of compounds that the body cannot synthesize by itself, and carrier of vital substances. Fats cannot be replaced by other substances. Apart from this physiological aspect, they are excellent carriers of flavors, and dishes prepared with fats are much tastier than others. Fats also provide a smooth, creamy consistency to many dishes, which translates into a good mouth-feel. This explains in part why the consumption of fat is still very high today, even though the segment of the population performing hard labor has diminished greatly compared with the past, rendering a very high supply of calories no longer necessary (see also Chapter 1.4). The improvement in flavor, in particular, is certainly the reason why fats and oils have been appreciated for a long time. However, only since the beginning of the present century has it been possible in the industrial nations to provide the population with sufficient quantities of fat at reasonable prices (see Chapter 1.3). Because of this increasing importance of fats and oils, governments have intervened to a great extent in their production and distribution in the last 100 years (see Chapter 1.5). European food legislation, in particular, has often been marked by protectionist objectives. The importance of fats and oils to the global economy (Chapter 1.3) becomes clear when considering the amount of oilseed and fruit grown worldwide. In 1995, -60 million ton of palm fruit and -1 1 million ton of olives as well as >200 million ton of oilseeds were harvested. From these amounts, >90 million ton of oils and fats were derived. Many countries are trying to enlarge their shares in the interna-
2
Fats and Oils Handbook
tional market, a strategy that is usually to the disadvmtage of others and leads to defensive measures. National interests play a part here. For example, 10 years ago, the European Union began to promote the cultivation of sunflowers and rape in the area of the Community. A simultaneous attempt to stabilize the Community’s budget deficit by introducing a tax on fat caused the U S . to fear for its soy exports, resulting in a threat of trade obstructions aimed at the European automobile industry. The confrontation was averted in 1987, but it will reappear again and again, unless the issue of a tax on fat is buried for good. In addition to the importance of oils and fats for human nutrition, there is a substantial market for technical fats. The importance of these oils and fats will increase considerably in the future because they represent a vast potential of naturally regenerating raw materials in which the chemical and pharmaceutical industries have a special interest. A short survey of these technical fats is given in Chapter 1.6. The importance of oils and fats for human nutrition, the animal feed produced from the processing of most oil plants and the economic importance of oils and fats, i.e., the fact that many millions of people worldwide make a living by the production and processing of oils and fats, all combine to give special importance to technology. This may even be enhanced if oil-bearing crops could be offered to the chemical industry as a source of regenerating raw materials. Only -1% of -300,000 existing species of plants has thus far been examined for their qualifications as useful plants. Only 300 of these, i.e., 0.1%, are being used agriculturally today. About 7% of these, -20, are oil plants. A considerable potential, which may be suitable for the recovery of oil, thus remains. This is especially true when plants with a special fatty acid pattern are desired. In addition, there are new methods of plant breeding that also may open up new prospects.
1.1 A History of the Production of Oils and Fats From ancient times, man unconsciously consumed fat in his food via plants, fish, and meat. However, the use of oils and fats required some simple techniques. For example, only when the ability to make fm was discovered was it possible to melt the fat of hunted animals and store the fat. Storage also required the ability to produce vessels made from clay or another materials. Mutton tallow and lard, and later butter, cream, and fish oils were known in prehistoric times (Hanssen and Wendt 1965). Vegetable fats from olives and sesame seed, and possibly flax were also known. Until the previous century, the utilization of fats and oils as food went hand in hand with their use as fuel, predominantly for purposes of illumination. Even today, the name “lampante” for certain qualities of olive oil refers to this. As a base for ointments and cosmetics, they are still in use today, just as in the earliest periods. It is known from pictures that food factories were in existence in early days. Wooley (1929) presented a picture of an Egyptian dairy-farm that illustrated, among other things, the process of churning. Erman and Ranke (1923) showed the sequence of operations of a large-scale Egyptian bakery of Ramses 111 in Thebes
Importance of Fats
3
around 1200 B.C. in which a dough resembling a Chelsea bun is being baked in oil. People in the Mediterranean region and in Asia used oils long before those in Central Europe. With olives in the Mediterranean area and sesame in the area of the Euphrates and Tigris, oil plants that do not grow in the temperate latitudes were readily available. The Bible mentions oil in many passages. Moses, for example, required oil as a donation for the Tabernacle’s lamps; cake and pancakes were baked with unleavened oil (2 Moses 29). It was customary to anoint with oil, and Jacob anointed a stone this way to sanctify it. Passages in Luke indicate that oil was a valuable commodity. For instance, there is a description of how a person owed 100 barrels of oil to somebody else (Luke 16: 5.6). The importance of the olive tree to the people in the Mediterranean region also became visible by its being consecrated to the goddess of wisdom, Athene, in ancient Athens; it later became the symbol of peace and promise. Thus, after the Deluge, the dove came to Noah with an olive leaf in its beak (1 Moses 8:1l), a symbol of the world’s survival. Plinius described how to extract olive oil by pressing ripe fruit in a squeezing vise, a procedure customary in his time. Butter (“dense, solid milk foam”) was also mentioned, but only as a replacement for olive oil in times of need, or for baking. Another familiar practice of fat technology was the remelting of lard for cleaning purposes. Roman fat technology spread throughout the Mediterranean region. Excavations in Tunis show its propagation in Northern Africa; in Pompeii and Herculaneum, entire processing facilities consisting of oil mills, oil presses, oil shops, and oil depots were uncovered (UNION 1959). Because the fatty acids corroded copper, oil was transported in vessels made of lead, but also in tanker vehicles. These were carts carrying animal skins enclosed in iron hoops in which the oil was kept. Poppy seed has also been discovered in Swiss lacustrine dwellings dating from the 25th century B.C. It is probable that the inhabitants already knew poppy oil and that people north of the Alps became familiar with oil mainly through the occupation by Roman troops. According to tradition, oil was also extracted from beechnuts that were mashed, then wrapped in cloths and pressed between plates of metal or stone. Every large farm extracted its own oil. Later, agriculture made further progress, and rape and linseed were added as oil fruit. In the 16th century, the profession of the oil miller, who processed the farmers’ seeds, evolved. The oil was extracted by grinding, bruising, or pressing. Later, people shifted to squeezing vises. Windpower was used as propulsion in windmills. In the course of further development, hydraulic presses were built, and from the middle of the 19th century on, it was possible to extract oils and fats from the seeds by means of solvents. When the seafaring European nations conquered the world, the resources were expanded and unknown types of oil fruit with much higher contents of oil and fat than those previously known were brought to Europe. Until the cultivation of soybeans was widely expanded, these oilseeds yielded the substantial part of vegetable fats and oils consumed in Europe. The explosive increase in population in the industrialized countries of the world during the industrial revolution, combined
4
Fats and Oils Handbook
with urbanization, led to a new situation. The population that gathered in the cities had to be fed. This required an entirely new system of food distribution, which adapted itself to the change from domestic supply in small units (farms, villages or small towns) to industrial production. New requirements for food arose, especially concerning its preservation. New products such as margarine (see Chapter 8) and novel techniques such as hardening (see Chapter 6.4) made important contributions to mastering these challenges. Although the main concern in the late 19th and early 20th centuries was the satisfaction of basic needs, in today’s industrial society, there is no longer a problem of quantity. After the decline in food production caused by the two World Wars and the Great Depression, during which the question of “mere nourishing” became important, the essential aspect of the 1960s and 1970s was that of enjoyment. The primary function of food was no longer the supply of calories, but the experience of taste. Accordingly, the focus shifted from the production of quantities, which were in fact available, to quality. In particular, the emergence of the trend toward health consciousness has stimulated the demand for quality. Here the fat industry delivered exceptional contributions. The connection between cardiovascular disease and nutrition was detected in the early days. This knowledge was used to develop special products that provide preventive measures (e.g., becel; see Chapter 1.4). The excessive fat consumption of most of the world’s population and the consequences of overweight have led to the development of reduced-fat and very-low-fat variants of the most diverse types of food. For margarines, for example, the law had to be changed to allow this. Starting with margarines, food groups developed that made possible low-calorie nutrition, or, as in the case of becel (a trademark of Unilever concern), furnish variants of diverse foods free of or low in cholesterol and high in polyunsaturated fatty acids. In recent years, a new trend could be observed developing in parts of the population. Sensitized by a growing awareness for environmental issues, “naturalness” of products has been given high priority. Although the demands resulting from this are partly exaggerated and no longer have a clear foundation, it will lead to changes in technology in some fields, at least in the wealthier countries. In poorer countries, which strive to produce food for mere nourishment and survival, there is little patience for these trends. The priority here is to feed the population. Although the strong increase in population is no doubt leading to problems that cannot be overestimated, the production of fats has always increased at a rate higher than the population growth (see Chapter 1.3).
1.2 Fat in Food and Food Ingredients Fats and oils, as such, are used for the production of food; in addition, unprocessed food or ingredients for food production contain fats and oil, sometimes in substantial quantities. These include fruits and vegetables but also meat and fish (Table 1.1). For oil and fat technology, these figures are important because they help identify the raw materials for oil and fat production. In processed food, oils and fats are
lmportance of Fats
5
TABLE 1.1 Approximate Fat Content of Unprocessed Food FruiVNuts
(O/O)
Bananas Oranges Pears Sw. chestnut Avocado Coconuts' Almonds' Hazelnuts' Walnuts' Pecan nuts*
0.2 0.2 0.4 2.0 17 34 54 62 64 71
VegetabledCereals
Fish
(%)
Meat
(%)
Potatoes Tomatoes Broccoli Cabbage Corn Barley Mushroomst Soybeans
Haddock Cod Mackerel Caviar Herring
0.1 0.3 11.5 15 19 26
Chic ken breast Roast chicken Boiling fowl
1 6 20
0.1 0.2 0.3 0.8 1 .o 1.5 3 20.9
Miscellaneous
Eggs Milk
Eel Shrimp Lobster Mussels
1.5 2 1.3
11.5 3.7
Rabbit
8
Fillet of beef Haunch of beef Beef tenderloin
4.5 7 10
Fillet of pork Pork chop Bacon (lean) (fat)
4.5 7.5 65 88
'kernels. +dried.
also found in diverse quantities. The variety of foods listed below (Table 1.2) ranges from those which are produced by a single treatment step (e.g., by grinding) to those that require many steps of processing because they are composed of many kinds of raw material (Table 1.2). The figures cited can vary considerably and thus serve only as a basis for the order of magnitude of the fat content of the food.
1.3 The Economic lmportance of Oils and Fats Nourishment is an indispensable and essential need of the human race. It is the task of agriculture and the food industry to satisfy this need. Considering the current develop ment of the world's population, a huge demand is arising. This demand has to be satisfied under the best possible conditions. There remains a shortage of supply in many parts of the world. Considering the fat-providing potential of agriculture and industry, this demand should be able to be satisfied easily. In past years, the production of fat has grown at a faster pace than the population (Fig. 1.1). A shortage of supply is thus rather a problem of distribution and purchasing power than one of shortage in the sense of lacking potential. In the coming years, the production of fat will also grow more rapidly than the world population. Mielke (1985) estimated a 1Cfold increase in oil production from the year 1958 to the year 2000. During this period, the amount of soybean oil will increase sevenfold and palm oil production will increase 2.5-fold. For palm oil, this prediction is already far outdated. In the past 10 years, the volume of oilseeds stored as surplus amounted to an average of 14% of production (Mielke 1990).However, as can be seen from Figure 1.2, there is a strong correlation between gross national product, reflecting the standard of living, and fat consumption. Chma, India, Pakistan and Bangladesh currently represent almost one half of the world's pop ulation. Demand for fat by these four countries will increase not only as their popula-
Fats and Oils Handbook
6
TABLE 1.2 Aproximate Fat Content of Processed Fooda Sausages
(YO)
Corned beef Wieners Bavarian veal sausages Cervelat sausage German Fleischwurst Mortadella Calf liver pate Salami Smoked s. spread
6 20 22 35 30 33 35 38 37
Baked products Rolls White bread Crisp bread Zwieback Rich tea biscuit
0.5 1.2 1.5 4 11
Spaghetti . _
1.2
sweets Sugar Caramel Cocoa (slightly defatted) Milk chocolate
Milk products
0 10 25
Yogurt, skim Condensed milk Cream (whippable)
0.1 4-8 27-33
33
Quark Fresh cheese Camembert cheese Edam cheese Parmesan cheese Emmenthal cheese Roquefort cheese Processed cheese
5-1 2 5-1 2 23 24 26 30 32 2 3-2 8
Cereal products Oat flakes Wheat bran Wheat flour Rye flour Corn flour Corn semolina Corn flakes Pop corn
6.5 10
1-2 1 -2 2.6 1.1 0.4 5
Snacks Potato chips Roasted peanuts
(W
(Oh)
40 48
Miscellaneous ~~~~
~
Mustard Salad mayonnaise Mayonnaise Margarine Butter Cod-liver oil
'?his analysis is from European f d ; all values are examples only and may differ from country to country according to local habits, local taste and local legislation.
World
fat production [MMT] 120 100
population [billion] 12
'
8060 -
40 -. World population
__
20 01936
194S
1956
1966
197s
1986
~
1 ' 1996
Fig. 1.1. Growth of world population and oilhat production.
2
0
6 52 82.5 80.5 82.5 99.8
7
Importance of Fats _.
Germany
us.
\
Gross National Product [lo00US$ per capita] Fig. 1.2. Average spending power and fat consumption in different countries (adapted from Leonhard 1995).
tions grow, but it can be predicted that a tremendous demand for fats and oils will be triggered as their gross national product improves. Statistics concerning the world production of oils and fats have existed only since 1942. Estimations at that time, as well as those concerning the years before, were coordinated by the International Agrarian Institute in Rome (today FAO; Schiittauf 1942). Since then, there has been a shift from animal to vegetable fats (Fig. 1.3). As for all food, consumer prices for oils and fats have dropped signfi-
Marine oils Lard, Tallow Butter Pulp oils Seed oils
Fig. 1.3. Proportion of different oil sources on the world fat production.
8
Fats and Oils Handbook
TABLE 1.3 Oil Seed and Oil Fruit Production in the World by Region (O/O of total) Region North America South America China India, Pakistan, Bangladesh USSR (successor states) Europe (without USSR) Africa Malaysia, Philippines, Indonesia All others
1935
1950
1960
1970
1980
1990
1995
17 7 15 11 9 21 7 6 7
24 8 13 9 8 18 8 7 5
24 9 9 9 9 19 9 6 6
27
28 11 7 8 1 15 6 9 6
26 12 9 6 1 0 9 15 5 13 5
24 13 12 1 4 14 4 14 4
10
7 8 1
2 17 7 5 7
cantly in relation to income. Rendered animal fats, and especially butter, were goods in short supply and thus very expensive. For example, in Germany in 1857, -15% of one’s daily food expense was needed to buy only 40 g of butter. In 1800, the entire expenditure for food amounted to -70% of a family’s entire income, in 1900 to -50% and in 1974 to -28%. Today in Western Europe, this fraction is clearly ~ 2 5 %(Gander 1984). The importance of oils and fats has increased during the past 100 years. Since the time before World War I, worldwide production has more than quintupled. The center of oil fruit cultivation was once situated in tropic regions, whereas today it is in temperate latitudes (Table 1.3). To counteract this trend, tropical countries, in particular, Malaysia, Indonesia and the Philippines strive hard to regain their former rank on the scale of producers. On the one hand, it allows them to feed their own growing population; on the other hand, it creates export possibilities and explains why the production of palm oil in these countries has been extended steadily and forcefully for about 15 years. The higher oil yields of cloned palms contributed to this in part. In Malaysia, production rose from 4 million ton in 1985, to -7 million ton in 1990 and to -10 million ton in 1995 (see Chapter 4.2.1). In that country alone, almost two million people make a living from palm oil, and in 1986, this branch of the industry yielded a revenue of almost $1.4 billion (US.). At the same time, these efforts are a prime example of the importance of oils and fats to certain regions of the world. Often, one region’s efforts to raise production are accompanied by countermeasures from another region. In the case of Malaysia, the countermeasure was an attempt to discredit tropic oils. The increase in the production of palm oil was regarded by the U.S. as a danger to its soybean oil market. Campaigns were started with the objective of pushing the tropic oils out of the country as completely as possible. In addition, new directives concerning labeling were passed, forcing the producers to declare the oils used. Public health policy was given as a reason; later, this proved to be true to some extent but that explanation was viewed by Malaysia as simply a pretext. Malaysia believed that concern about losses suffered in the production of soy seed
lmportance of Fats
9
was the actual reason (Anonymous 1987). After fractionation, palm olein is a good raw material (see also Chapter 1.4), and for many products and branches of industry, stearin is also used as a consistent fat. It is expected that the U.S. import of tropic fats will level off at -750,000 ton per year. Of the laurics (coconut and palm kernel oil), 70% go to oleochemical processing. The distribution of the individual types of oil fruit has changed considerably (Fig. 1.4) as shown by the comparison of their distribution in 1935, 1960, and 1995. A projection to the year 2000 (data from Mielke 1994) is also given. Figures 1.5-1.7 show the production of oils and fats during the last 80 years. The figures refer to the amounts of visible fats produced. A distinction must be made between butter, lard, and olive oil, which represent end products suitable for consumption (Fig. l S ) , vegetable oils and fats (Fig. 1.6), which have to be processed, and oils utilized mainly in industry (Fig. 1.7). To simplify the presentation, tallow, and fish oil, which are generally processed further, are listed together with butter, lard, and olive oil which are consumed as such. Figure 1.5 shows that the production of whale oil has virtually disappeared, whereas the production of fish oil is -10 times higher now. This can be attributed
(C = Corn oil; P = Palm kernel oil; S = Sesame seed oil)
Fig. 1.4. Proportion of different vegetable oil sources on the world fat
10
Fats and Oils Handbook
Fig. 1.5. World production of butter, lard, beef tallow, fish oil, and whale oil. mainly to various new catching methods. However, a stagnation of these figures has to be anticipated, also caused by international campaigns toward sustainable fishing. The high increase in tallow production mirrors the rise in beef production. The growth rates, however, are far lower than those of vegetable fats and oils; tallow is only a by-product. The rapid rise in the production of soybeans, which has increased 50-fold, is clearly visible. The growth rate of sunflower seed is even higher. Compared with these amounts, the production of oil-bearing plants utilized mainly in industry is modest; however, the fact that a considerable amount of the edible oils is used for industrial purposes must be noted (see Chapter 1.6). By looking at the production of fat and its products, the political development in the world or in particular countries can easily be inferred. Fat production in Germany (see Chapter 1.3.1), for example, was at its lowest level during both World Wars, but also during the great depression in the 1920s and 1930s. For a good supply at low prices and, related to that, an adequate profit for the farmer, the yield per hectare is essential because in the industrial nations only a high yield per hectare promises sufficient returns. However, during times of extensive shutdowns of areas (e.g., the US.),there are considerations if models exist that are based on less intensive tillage. The yield per hectare thus keeps rising, but at a far slower pace (Fig. 1.8). It is the yields per hectare that indicate the difference between developing and industrialized countries. Cultivation in Third World countries often takes place on very small farms in poor soil with an insufficient supply of water; for particular regions and their state of affairs, this clearly makes sense. Production in the industrialized countries can vary greatly as well (Fig. 1.9). Consider this comparison. By feeding cows the yield of 1 hectare (2000-3000 kg on average), only 2W300 kg of milk fat can be produced. Of course, one must
11
Importance of Fats
Soybean oil Palm oil
Rapeseed oil Sunflower seed oil
Cottonseed oil Peanut oil Coconut oil
Sesame seed oil Olive oil
Fig. 1.6. World production of important vegetable oils.
admit that, for milk, the production of fat is not the main objective. However, byproducts are also gained from most sorts of oil fruit. Not all influences on production can be controlled even when the means are available. The source of raw materials might be exhausted without the possibility of exercising any influence on it, or the opposite may be the case. For example, the production of fish oil in Peru (one of the largest producers, and for its size, by far the largest producer) decreased from 3 11,OOO ton year in 1976 to virtually zero in 1984. Excessive fishing was not the cause, as was speculated initially, but rather a change in the direction of the Humboldt stream, which shifted its flow 350 km to
Fats and Oils Handbook
12
1.5
E r 1.0 C
5 0
ze
Linseed oil Castor bean oil
10.5
P
Tung oil Sperm oil
0 1910
1930
1960
1970
19SO
Fig. 1.7. World production of main vegetable oils for industrial usage.
the west of the Peruvian coast. The fish followed the flow of the stream. The Peruvian boats, equipped for inshore fishing only, were not able to follow the stream, and the entire industry broke down completely. Chile profited from this: its catches in 1989 amounted to -6 million ton and -260,000 ton of fish oil were derived from it.
Fig. 1.8. Production yields of some selected vegetable oils.
Importance of Fats
13
Fig. 1.9. Production yield of some oilseeds in different countries.
The opposite occurred in the insular republics of South East Asia. There, devastating typhoons had gravely affected the coconut crop over many years. Without any identifiable reason, the typhoons changed direction, and the coconut industry began prospering again. World affairs interfere considerably with the production of oil but in different ways than the natural influences listed above. Their influence on oil prices is especially evident (Figs. 1.10 and 1.11). Wars, but also energy crises are mirrored here, although the supply of edible oil has hardly any relation to the production of mineral oil. Depending on the type, the price of vegetable oils is higher or lower than that of soybean oil, whereas the market value of animal fats lies, without exception, below that of soybean oil. However, it must be considered that fish oil, with very few exceptions, is used primarily in hardened form, so that in comparison with tallow and lard, the costs for hardening have to be taken into account. Tallow is usually fractionated before use. Because soybean oil has developed into the predominant oil, the prices of the other oils are to a certain extent dependent on that of soybean oil (Figs. 1.12 and 1.13). These figures show prices leveling off in years when edible oils strongly forced their way into the market and the difference in price for soybean oil, which has been relatively constant (except for some peaks). They also give an idea of the relative value of the various oils and fats. Considering the large volumes of oil produced, the high growth rates and the competitive situation, it is no surprise that oil prices have declined relatively. Depicted in U.S. $ against inflation in the U.S., it becomes obvious that oil prices
Fats and Oils Handbook
14
L I S M 1970 1975 1980 IS85 I990 1-
I I
1065 1970 1975 1980 1985 1990 1096
1400
1200
lo00
800
600400 200 Palm oil
0 1 1966
1970
1976
l&
1986
l&
l&
Fig. 1.10. World market prices of important vegetable oils.
in January 1990, in spite of the increase of the absolute amount in constant money, are only -36% of those in January 1965. During 1987, they dropped temporarily to only 25% of 1965 levels (Fig. 1.14). Taking into account the decline of the U.S. $ in proportion to the currencies of some European countries, the oil has become even cheaper. However, this is compensated partially by lower inflation rates (Figs. 1.15 and 1.24). Because of the historical development of the production of oil fruits in regions completely different from those in which they are consumed, the market has always been international. Oilseeds and oil are usually traded in U.S. $. Because
15
Importance of Fats
1200
Soybean oil
400
1985
1400
1970 1975 lSe0 1985 1990 1995
1985 1970 1975 1980 1985
lee0 1995
World market pnce [US. WMT]
1200 lo00
800
Ittoned oil
800 400 200
Soybean oil 0 '
1
19S5
I
1970
1975
IS60
1985
ID00
1996
Fig. 1.lo. Continued.
the European countries are not self-sufficient, they have to import oilseeds. For the oil milling industry outside of the U.S., which has to commercialize oil as well as meal, the deviation of the exchange rate of the U.S. $ to the respective currency (Fig. 1.15) is added to the deviation of the price for the raw material. This can exert quite a considerable influence on the market position because products made from vegetable oils and fats always compete with indigenous products (e.g., margarine with butter). In addition, extraction meals have to compete with indigenous fodder. The influence of the deviation of the U.S. $ exchange rates against the only stable European currency (German Mark) is made clear. One realizes that the deviation for the European
Fats and Oils Handbook
16
Edible Tallow
1965
1970 1975 1980 1985 1990 1995
1W5
1970 1975 1980 1985 1 W 1995
World market price [US. WMTJ I2Oo
I
1000
800
600
400
200 -.
0 ’
I
igss
1970
197s
is80
198s
isso
,
ims
Fig. 1.1 1. World market price of some animal fats (soybean oil as comparison).
market can thereby become even larger. In times of a powerful dollar, considerable price discrepancies arise that are difficult to pass on to the customer. Prices on the world market do not always depend on supply and demand alone, but also on expectations for the volume of the next harvest. Most deals are closed on futures long before the harvest amount is known. Besides the area that is going to be cultivated in the respective year, information about the expected weather is relevant. However, not even a major regional weather-related catastrophe would be capable of influencing prices substantially. The U.S. exhibits the greatest deviations in the area used for cultivation and thus the strongest influence
Importance of Fats
440
17
World market pnce dfference to soybcen 011 [US$/MT]
300
zoo
loo 0 -100
-100
300 400 1066
1970
1976
1980
1986
1990
1996
World market pnce dfference to soybean oil [US. $IMTl
Peanut oil
400
300
'
1066
1970
1976
1980
1966
1990
1996
Fig. 1.12. World market price difference of some vegetable oils and fats to the price of soybean oil.
on the amount of crop to be expected. According to the previous year's supply and achieved prices, areas of smaller or larger size will be shut down. Because soybean oil is by far the most-produced oil, its quantity influences the prices of the other oils and fats as well. Consequently, the number of acres cultivated in the U.S. in the respective year plays a very important role in the equation. During times of high supply, prices usually drop at harvest time and rise when the provisions run short. During this process, the quality usually declines as well; therefore Brazilian and Argentinean producers generally wait until the supply of the crop in the Northern hemisphere is exhausted, or the quality declines, before they commercial-
18
Fats and Oils Handbook
Fig. 1.13. World market price difference of some animal fats to the price of soybean oil. ize their crop. This is the only way to obtain good prices for relatively smaller producers with higher transportation costs. As a result of intensified cultivation in the Southern hemisphere, fresh soybeans are available twice a year. Apart from production and availability, demand also plays a decisive role in price. When comparing demand with availability, we see that the quantities pro-
Fig. 1.14. Price of soybean oil in current and constant money (US $).
Importance of Fats
19
Fig. 1.15. Price of soybean oil in U.S. $ and in a stable European currency (DM).
duced were almost without exception higher than the demand (Fig. 1.16). This leads to an accumulation, which depresses the prices. Malaysia alone is said to have had a stock of palm oil of -1 million ton in 1988-1989. The econoinic situation in the large countries that are not self-sufficient and are subject to monetary problems is closely linked to demand, and thus to a high
Fig. 1.16. Demand and supply balance for vegetable oils and fats (after Batterby).
Fats and Oils Handbook
20
degree, decisive for price development. On the one hand, there is the Soviet Union (respectively, the successor states), where the import of meals as fodder plays an important role. On the other hand, there is India, which represents a huge market with 9300 million people. In 1986-1987, -2 million ton of oils and fats were imported. The imports in the following years are estimated to be -0.5 million ton, but the most recent estimates suggest even lower amounts; however, the demand that cannot be met that way amounts to 1 million ton per year. In contrast to this, it is expected that Pakistan will increase its imports to almost 1 million ton. In view of these markets, the surplus production is within the range of the deviations of the quantities imported by these countries. The demands are thus not regulated by the actual demands, but by the availability of funds. When we relate the prices for oilseeds on the world market to those for oil, we have to consider that they are determined by the oil content as well as by the usability of the meal as fodder. We see that an intricate web of influences exists that determines the prices. This has direct influence on the supply, more so in some parts of the industrialized countries in which the price for seeds fluctuates around the limit of profitability despite subsidies. Without subsidies, production at today’s prices would not be possible. For the oil mills, the production of soy seed, for example, means that they have the following net profits (Prices Chicago, May 1990): Cost (US. $) lo00 kg 180-200 kg 820-800 kg
soybeans oil extraction meal
Cost of beans Gross profit from oil and meal*
Revenue (U.S. $)
322.12 193.68-2 15.20 134.55-13 1.27 322.12 328.23-336.47
*without any running and processing cost, without losses and depending on the oil content.
This margin (however simplistically calculated) is extremely small for a capital-intensive industry such as oil milling, so that small changes in the meal’s marketability or in the price would render the entire enterprise uneconomical. The economic importance of a raw material, however, reveals itself not only in the supply, but also in the demand. Because oils are traded internationally, their prices are not dependent on the demand in a single country. In addition, there are subsidies for agriculture in many regions. This has repeatedly given rise to international irritations when, for example, the U.S. reproached the European Community for violating the GATT-treaty by means of subsidies and by partially barring the market for agricultural imports (see Chapter 1.3.2). From Brussels’ point of view, these subsidies are necessary to assure some degree of self-supply for certain agricultural goods of the European Community.
lmportance of Fats
21
Subsidies can have other purposes, for example, as an incentive for structural reorganization. For instance, the Community supported the shift from the cultivation of rape with a high content of erucic acid (HEAR) to that with a low one (LEAR). It was intended to arouse the farmers’ interest in rape, which grows well in temperate climates, and to promote its cultivation instead of root crops and cereals, which are produced in excess. In 1988, the subsidy was 5.90 German marks (-3.30 U.S. $) per ton of rape (LEAR). The prices the producer can gain for his products on the market, however, are dependent on the demand in an individual country. In this respect, the price structure of butter and margarine in the individual countries is of interest. In some countries, for a large part of the population, margarine is a substitute for butter. The sales thus depend to a high degree on the relation between the prices for butter and margarine (Fig. 1.17). In Germany, for example, a portion of the consumers buy margarine whenever the price differential to butter increases beyond a certain value. This fact, which applies to other countries as well, was used by the EC-commission to diminish the “butter-mountain” by bringing butter onto the market at a reduced price. In the period from 1982 to 1985, heavily subsidized butter in the EC amounted to >2.2 million ton. To subsidize this quantity, which replaced 80% of the fresh butter, 1600 ECU per ton had to be paid (>3200 German marks or 1500 U.S. $ per ton at the exchange rates of 1986; Friedeberg 1986). In other countries, the image of margarine is completely different, and butter plays only a minor role. Interestingly, this also applies to the Netherlands and Denmark (buttedmargarine 1:7 and 1:3, respectively), countries that are commonly known as “milk countries.” 10
a
8
g
6
Butter
Vegetable
I
2 k
p.. margarine
Butter
4
.-8
Average margarine price
ti
2
0
,
i
I910
4
1930
I
,
1950
1970
1990
Fig. 1.17. Price differential of margarine and butter in Germany.
Fats and Oils Handbook
22
1.3.1 The Economic Importance of Oils and Fats as Well as of Fat Products in Europe and Germany
As stated in the preface, Germany is seen as a particular example of a western European country. In the past 50 years, nutrition habits in industrialized countries have changed drastically (Fig. 1.18), with Germany as an example. (Remark: all data in figures concerning Germany end with the year 1990 because data after the reunification would not be comparable.) In spite of diminishing hard physical labor, caloric intake has grown, and despite the findings and recommendations of nutritionists, the percentage of fat in the diet has increased. Since 1850, the consumption of fat in industrialized countries has risen constantly. It is assumed that the German population satisfies -40% of its energy demand with fats and oils. Currently, the amounts consumed consist of approximately equal shares of butter, margarine, and edible oil, as well as tallow and lard (Fig. 1.19). The proportion of margarine has dropped since the 1950s in favor of edible oil and fat. The market for emulsion fats altogether is currently dropping at a rate of -3% per year. The shift in proportions is disadvantageous for the visible fats, whose proportion or intake can be controlled consciously, and favors the invisible fats (proportion -1: I). Currently, the annual per capita consumption amounts to -30 kg of visible fats (Fig. 1.20). The history of fat policy in Germany (which is representative of other European countries) is depicted comprehensively by Schtittauf and Pischel(1978), whose work is referred to in part in the following paragraphs. Their overview reflects the political turmoil in Europe during the last 80 years. 200
0
I
6
eh)r
1940
I
w
* &--" #*-
1980
. .us*m --m -
1960
1970
1980
1990
Fig. 1.18. Per capita consumption of different food in Germany
Importance of Fats
23
Fig. 1.19. Proportion of some fats and oils on total fat intake.
Today, Germany’s self-sufficiency concerning vegetable oils and fats is quite low. About 90% of the raw materials are imported. In the early 1900s, Germany’s self-sufficiency for fats and oils was -50%; between 1945 and the present time, the overall self-sufficiency is -40%. Despite these shortcomings, there have always been attempts to impose special taxes on the import of oils and fats (fat-tax). Actually, this tax has never been directed against the fats themselves, but against fat products, especially margarine.
Fig. 1.20. Per capita consumption of visible oils and fats in Germany.
24
Fats and Oils Handbook
Toward the end of the last century, with the introduction of margarine, the first legal restraints were introduced; initially, these amounted only to sale restraints (e.g., no butter and margarine in the same room). However, a duty was imposed on the import of margarine or equivalent oil mixtures according to Bismarck’s policy of protective duties. Because this duty did not apply to individual oils but only to oil compounds or to finished products such as margarine, the first margarine plants were built directly along the border in The Netherlands, which were most progressive, so that transportation costs for the duty-free raw materials were as low as possible. During World War I, a considerable shortage of fat occurred. Naturally, imported fats and oils became scarce first, so that fats for margarine were not available in sufficient quantity. From 1917 on, only one third of the required volume of fat could be put on the market. In the respective figures, this becomes apparent through the lows in margarine production, and better yet, in the contrary development of the fraction of margarine and butter at that time. During the time of inflation, caused by the putative upswing during the postwar period, the number of margarine plants in Germany rose to several hundred (today the number is -10). On May 1, 1933, a fat-tax, combined with a fixing of quotas, came into effect in the Third Reich. The production of margarine was frozen at 60% of the 4thquarter output of 1932; moreover, a tax of 0.50 Reichsmark per kilogram of margarine, edible oil, hardened vegetable oil and whale oil was inflicted. An “Agency of the Reich for milk products, oils, and fats” was established. Soon, only a standardized margarine, packed in a simple, brown, unattractive wrapper was permitted to be marketed. As a consequence, 115 out of 148 margarine plants were forced to close. It was not until 1949 that branded margarine products were again permitted to be sold. However, at about the same time, the oil milling industry was financially hard hit because it was forced to sell to the agriculture sector meal at 50% of the world market prices. A fat-tax was again considered in 1950. It was prevented by protests from labor unions and social associations. Instead of the fat-tax, vegetable oils and fats were subsidized through the end of the Korean War. In later years, the fat-tax was considered several times, mainly during the times when there was an excess of butter, the so-called butter mountain, in the European Community. The fat-tax was consistently prevented. The primary reasons for the failure of the fat-tax included strong protests from consumer groups who feared higher prices. Another reason for the failure of the fat-tax was intervention by the U.S. (different reason than before), who did not want to see its export of soy products diminish because of the enormous rise in U.S. soybean production. At that time, the American soy farmers were feeling the effects of poor prices for their crop. Finally, this would have been the first tax that the EC could have inflicted, and increased independently from the individual governments. The EC certainly needed the revenues because subsidies of other agricultural products amounted to several hundred per cent (i.e., in 1977,220% for butter and 107% for olive oil).
Importance of Fats
25
The prices for fats and oils in Germany (as in other European countries with hard currency) in terms of constant money have developed differently from those in the U.S. Two opposing influences are operating here, i.e., the substantially lower inflation rate in Germany compared with that of the U.S. (over a period of 30 years from 1965 to 1995, only -56% of the U.S. rate) and the depreciation of the U S . $ with respect to the German mark (from 1965 to 1990, -45%). The effect is clearly visible in Figure 1.21. Presenting the price for soy on the world market in U.S. S as well as in German marks, according to the respective exchange rate and with an adjustment for inflation, one can see that soybean oil in Germany in terms of constant money costs only -30% of the amount in 1965 (U.S.: 36%; Fig, 1.21). This is reflected in the consumer prices for oils and products consisting mainly of oils and illustrates some of the problems of the fats and oil industry as a whole. After the reduction of the butter-mountain, which had temporarily reached >1.4 million ton, by means of regulative measures by the EC (quotas for milk), a certain pressure to intervene for regulating purposes has subsided. The next decisive step will be the integration of the different forms of agricultural producers in the new and old federal states of Germany into an all-German system. In the new states, a potential for the production of oilseeds is building up; in relation to the population, it is larger than that in pre-unification Germany. The European Union will be faced with the same problem when considering the membership of Eastern European countries such as Poland. Figures 1.22 and 1.23 reflect the situation in the German oil milling industry, which crushes about two thirds of the oil consumed. The development of the amounts of oil produced per variety reflects the European Union’s move towards rape and sunflower, and the crushings demonstrate the dominance of these two
Fig. 1.21. Price of soybean oil in current U.S. $, and current and constant DM.
Fats and Oils Handbook
26 I.o
I
0.8-
Er 0.6 -.-
0
0
3
Rapeseed oil
//I Palm kernel oil
Soybean oil
Oa4
T Peanut oil
\
I+
coconut oil
0.2
Sunflower seed oil
0 I910
1925
1940
1956
1970
1985
Fig. 1.22. Oil produced in German oil mills.
oilseeds over soybeans. Although more southern countries such as France are crushing relatively more domestically grown sunflower seed, this picture can be regarded as typical for Western Europe. In spite of the difficulties with eamings and profits and the strong competition from abroad, the quantities processed increased until 1980 and have since remained
r-
6
5
€ 4
f . P i
e
seeds (total)
Meals (total)
Soybeans Rapeseed Soy meal
2
a
Oil (total)
I
0 1910
1925
1940
1956
1970
1985
Fig. 1.23. Seed processed in German oil mills.
Importance of Fats
27
relatively stable. This is partly a result of the trend to move the mills closer to the large sea harbors, such as Rotterdam in The Netherlands. The quantity of extracted oil has increased because the oil content of rapeseed is higher than that of soybeans. In the processing of soft seeds (rape/sunflower), the Central European mills will thus have greater chances of competition than in crushing soybeans. 1.3.2 Oil Politics in the European Community
At the time when the guidelines of the EC-agricultural policy, which also encompasses the production of oil, were laid down, the degree of self-supply for vegetable oils (except olive oil, which is regulated separately) was ~ 1 0 % and that of vegetable proteins 4%. In the course of the past years, this figure has risen to >50% for vegetable oils (Fig. 1.24). Certain types (rapeseed, sunflower seed) are even exported (Friedeberg 1989). The production is subsidized and protected by duties; in 1962, the EC committed itself in the Dillon-round of the GATT-treaty to not raise the duties on oilseeds, oils, and meals. The subsidies rose from -0.1 billion ECU in 1977 to -3 billion ECU per year in 1988 and have remained on this level. Subsidies were granted without limits on volumes and represented the difference between a representative price on the world market and a desired price (both fixed by the EC-commission for one year). The subsidies are paid via the oil mills. As mentioned above, there are no limits on the acreage and the quantity produced and thus no limits on the total amount of subsidies for an individual producer or, equally, the EC. By changing the targeted price, an incentive to produce oil fruit was
Fig. 1.24. Production of soybeans, rapeseed, and sunflower seed in the European Union.
Fats and Oils Handbook
28
TABLE 1.4 Fatty Acid Composition of Fat in Human Adipose Tissuea and Difference in the Composition of Serum Lipid Extract of Vegetarians and Nonvegetariansb Fatty acid in fat of adipose tissue
(%)
Palmitic Palmitoleic Stearic Oleic Linoleic
25 7 6 45 8
-
All others
9
Vegetarians
Nonvegetarians
Fatty acid (YO) in serum lipids
1982
1986
1982
1986
Palmitic Palmitoleic Stearic Oleic Linoleic Linolenic Arachidonic All others
20.1 3 .O 6.3 19.2 36.5 1.5 5.9 7.5
20.7 3.4 6.6 19.1 34.5 1.1 5.6 9.0
21.1 3.4 6.4 22.3 30.9 1.1 6.3 8.5
22.5 3.7 6.3 22.4 28.4 0.9 5.8 10.0
aSource: Ceigy. bSource: Melchert (1988).
created that led to the explosion of quantities as illustrated above. Friedeberg assumed two motives by the EC-commission for this policy. On the one hand, there was the uneasiness in being dependent on others (low degree of self-supply), supported by a very brief embargo on soybeans by the U.S. in 1973; on the other hand, there was the attempt to reduce the weight of the subsidies on grains, which oppressed the Community’s budget. By means of this policy, the support for the production of oilseeds became the third highest item in the EC’s agricultural expenses. The mawtude of the subsidies unduly burdens both the budget and the relationships to nations TABLE 1.5 Cholesterol Content of Food Food Vegetable oildfats Fish oils Lard Milk Milk powder Butter Milk fat Pork (lean, U.S., UK) Pork (+ fat, U.S., UK) Beef (lean, U.S., UK) Beef (+ fat, US., UK) Calf‘s liver Finfish, low fat Finfish, high fat Shellfish, crustaceans E!% Egg yo1k
Cholesterol (ppm) <50 5000-8000 9 80 120 960 2 800 -3400 >59C-670 >650-710 >650-710 720 4900 470-570 590-790 860-1 200 41 0 16,000-1 7,500
Reference %her 1987 Tucker 1993 Seher 1987 Taufel 1993 Taufel 1993 Taufel 1993 Taufel 1993 Larnbert 1993 Larnbert 1993 Lambert 1993 Lambert 1993 Seher 1987 Childs 1993 Childs 1993 Childs 1993 Taufel 1993 Stadelman 1993
lmportance of Fats
29
with large agricultural exports. In 1988, the U.S. issued a fonnal complaint for the first time concerning the violation of GAIT. As a mechanism of stabilization, the commission proposed a fat-tax, which created quite a stir internationally and provoked the U.S. to threaten counteraction. After great protests by most trading partners as well as by many organizations within the EC, the plans were suspended for the time being. Subsequently, the EC searched for alternative solutions and found a system of “stabilizers,” the elucidation of which would be beyond the scope of this book. It is doubtful that this system will lead to the desired outcome. It is also uncertain how these regulations can be made compatible with Article 110 of the EC-treaty, which states that the aim of the EC’s trade policy is to contribute to the general well being through the following: a harmonic development of world commerce, the progressive lifting of barriers in international trade and the reduction of customs barriers. It is certain that the problems cannot easily be solved, but do seriously threaten the budget. In particular, it is difficiult to make compatible the aims of the EC’s agricultural policy according to Article 39; these include a sufficient income for the farmer, stable (internal) markets, reasonable consumer prices, increased productivity, and a secure supply.
1.4 Fat in Nutrition As previously mentioned, fat serves mankind as an energy supply, a reserve of energy, makes possible the intake of vital fat-soluble substances and supplies the body with essential fatty acids. The fat content of the human body is 16%in the embryo, with an adult body consisting of approximately the same percentage; deviations range from 8 to 50% (FriisHansen 1965). Fat is stored mainly subcutaneously and in the muscular tissue, as well as in deposits surrounding the inner organs such as the heart, kidneys, and intestines. In addition to its function as a quickly activated energy source,the subcutaneously deposited fat also serves as an insulating layer against hypothenria; the fat tissue surrounding the inner organs serves as a protective pad against physical injuries. The body can synthesize fat in part from carbohydrates, but to a large extent it is conveyed with food. The amount of fat in the diet cannot be precisely defined because of the influence of general living conditions (Gottenbos 1985 and 1988). Certain fat components, the essential fatty acids, are vital and must be supplied from outside. They are essential components of the cell membrane structure. Their metabolism is well known (Table 1.6; see Numa 1984, for example) leading to precursors of so-called eicosanoids that influence the behavior of the cell and are important for activities such as proper cholesterol transport. Fat conveyed with food passes through the stomach, is emulsified in the intestine by gall bladder secretions and is then hydrolized by lipases (pancrease), which are the enzymes of the intestine and the pancreas. The lipases present in the stom-
Fats and Oils Handbook
30
TABLE 1.6 Metabolism of Essential Fatty Acids Effect
Enzyme working
a-Linolenic acid ALA (18:3w3)
Linoleic acid (18:2w6) A6-Desaturase
.1
-2 H
Elongase
1
+2c
-1
-2 H
I
+2c
I Docosaheptaenoic acid DPA (22:5@6)
1 Docosa heptaenoic acid DPA (22:5w3j
Adrenic acid ADA (22:4w6) A4-Desaturase
I Eicosapentaenoic acid EPA (20:5w3)
Arachidonic acid AA (20:4w6) Elongase
1 Eicosatetraenoic acid (20:4w3)
Dihomo-y-linolenic acid DGLA (20:3w6) As-Desaturase
1 Stearidonic acid (18:403)
y-Linolenic acid GLA (18:3w6)
-2 H
1 Docosahexaenoic acid DHA (22:6w3j
ach separate fat that is hulled in protein from its protein hull. Hydrolysis is continued in the duodenum to yield ~ 1 0 % of triglycerides and diglycerides as well as 40-50% of monoglycerides, 40-50% of free fatty acids and glycerol. In the first 100 cm of the small intestine, the oily solution of triglycerides and phospholipids (chylomikrons) with a droplet diameter of 0.5 pm exists alongside the microchylons (0.05 pm), which consist of mono- and diglycerides and salts of gall acids. These are further broken down into the micellar fraction consisting of monoglycerides, fatty acids and gall acids. The particle size has then reached -0.005 pm, which is sufficiently small to pass through the intestinal wall. Passage is possible for particles smaller than 0.01 pm (Ludwig 1968). The fat is reconstituted after its components have passed through the intestinal wall (Langdon and Phillips 1961). Short-chain fatty acids can pass through the intestinal wall more easily; however, this is not of importance for healthy people (cf. also Chapter 8.8). The fat enters the body via the lymphatic system, and any unneeded surplus is stored in fat deposits; the remainder is conveyed to the liver metabolism. Fats with melting points 4 0 ° C are virtually completely digestible. For additional information on the metabolism see, for example, Welch (1993). For the nutrition physiology of fats, unsaturated fatty acids are especially important (Hunter 1989). They consist of three families and are characterized by the position of the first double bond of the fatty acid chain, counted from the methyl group. An n-x fatty acid has its first double bond between the xth and x + 1 C-atom of the chain counted from the end. The next double bond is usually situated three C-atoms further along the chain. Representatives of the three main groups are as follows:
Importance of Fats
n-3 linolenic acid n-6 linoleic acid n-9 oleic acid, erucic acid
31
(also 0-3) (also 0-6) (also 0-9)
The hydrolysis of fats is performed by the same enzyme irrespective of the fatty acids. Among unsaturated fatty acids, the enzyme has its highest activity for n-3 fatty acids. In the reesterification after passing through the intestinal wall, the composition of the triglycerides in relation to fat taken in with the food is changed because fats stored in different regions of the body exhibit typical fatty acids patterns. Their composition is relatively constant but can be changed by very unbalanced nutrition or high doses of fat. Human adipose tissue is composed essentially of only five fatty acids (Table 1.4). A considerable portion of linoleic acid must be accumulated in the body because linoleic acid, as an essential fatty acid, cannot be synthesized. The difference becomes visible when comparing the relative fatty acid composition of fat in vegetarians with that in nonvegetarians (Table 1.4). Mammals have the ability to convert saturated fatty acids, but only into those that are monounsaturated, with the location of the double bond only at C-9 (Thiele 1982). This chain can be prolonged toward the carboxyl-end, but not toward the methyl-end. Thus, the synthesis of linoleic acid is not possible in animal organisms (cf Chapter 2.1). In addition to linoleic acid, arachidonic acid (formerly called vitamin F; AaesJorgensen 1961) is also regarded as an essential fatty acid. For about 60 years, it has been known that these two fatty acids are vital (Burr and Burr 1929); for example, they comprise the initial stages of prostaglandins (Bergstrom and Samuelson 1965). Prostaglandins were discovered in sperm by von Euler in 1934, but they are present throughout the body. They are the building blocks of hormones and possess their own physiologic activity as well (hypotensive activity, stimulation of the sleek muscles, regulation of the release of fatty acid from fats). Moreover, essential fatty acids are necessary for growth, contribute substantially to the building of cell walls, and form a structurally essential component of phospholipids. They occur mainly in the brain and nerves and participate in many metabolic processes including those of mitochondria. If the supply of essential fatty acids is insufficient, other nonessential ones are built into cell walls, leading to disorders. Among others, Hansen et al. (1958), Thomasson (1953), Holman (1961), Holman et al. (1964), Aaes-Jorgensen (1966) and Vles and Gottenbos (1989) reported such deficiency symptoms. A deficit of essential fatty acids can result, for example, in reduced growth, lowered prostagladin synthesis and skin damage. The symp toms disappear or come to a halt when n-6 essential fatty acids are supplied. The amount of essential fatty acids (e.g., linoleic or arachidonic acid) that should be present in the diet were previously stated to be at least 2% of the entire calorie supply (Holman 1961), which corresponds to an intake of -2.4 g of linoleic acid4187 kJ (lo00 kcal). The recommendations were developed further, and in more recent recommendations by the FAO/WHO (1977), 3% (corresponding to 3.6 g/4187 kJ or loo0 kcal) is stated as the desirable quantity. This percentage should be increased to
32
Fats and Oils Handbook
during pregnancy and to 5 7 % in the lactation period. According to Adam et a!. (1958), infants should receive twice that amount. Wolfram (1987) surveyed the
metabolic effects of a diet rich in linoleic acid. Another important positive quality of essential fatty acids that is the subject of a growing number of studies is their lipid-lowering quality as well as their ability to exercise a favorable influence on an excessive cholesterol level in the blood. This has a special significance for health issues because both an increased lipid level and an increased cholesterol level are considered to be risk factors for heart attacks. Cardiovascular diseases are the number one causes of death in industrial nations throughout the world. The lowering of lipid levels as a precautionary measure has been known for more than 30 years (Ahrens 1957 and 1959, Groen et al. 1952, Kinsella et al. 1952); although it is undisputed among experts, it is repeatedly attacked by lobbies. Mertz (1983) conducted a survey of the current state of knowledge. These findings on the connection between cholesterol levels and cardiovascular diseases were supported by the awarding of the Nobel Prize for medicine in 1985 to Brown and Goldstein, who were pioneers in the studies on this subject. Arteriosclerosis, caused by cholesterol esters and elevated cholesterol level, has clearly been identified as one of the key risk factors for heart disease (LRCCPT 1984, Schlierf 1986). Today, a distinction is made between LDL (low-density lipoprotein), commonly labeled “bad cholesterol,” and HDL (high-density lipoprotein), which is considered “good cholesterol.” HDL is responsible for transporting surplus cholesterol from the body to the liver. Thus it represents a means of transportation. A high level of LDL is directly related to heart disorders. A survey of the influence of nutrition was given by Schettler (1984). The lowering of the cholesterol level is due to the direct supply of linoleic acid and to its relative quantity in the fat. Stamler (1966) showed that when raising the intake of polyunsaturated fatty acids from 9 to 15%, the amount of cholesterol in the blood serum decreases by only 1.2 mg/mL. When the supply of saturated fatty acids is reduced from 16 to 9%, which indirectly results in a relative increase in polyunsaturated fatty acids, the amount of cholesterol in the blood serum drops by 1.9 mg/mL. The fundamental factor is not the amount per se of polyunsaturated fatty acids, but the proportion between them and the saturated fatty acids. This proportion is also called the P/S ratio (P = polyunsaturated fatty acids, S = saturated fatty acids). According to Mertz (1983), the P/S factor in the food of the German population was 0.39. This is far below the desirable ratio of 1:1 (P/S = 1). As a consequence (e.g., for diet margarine), the legislature will probably abandon the exclusive specification of the content of linoleic acid in the declaration of diet products and require in the future that the portion of saturated fatty acids or the P/S quotient be stated. It is doubtful that reaching the positive effects of a higher P/S ratio as stated above through increasing the supply of linoleic acid to the diet will be achieved, especially considering the rivalry between margarine and butter. This is mainly a problem of agricultural politics (cf. Chapter 1.3) and not one of health politics. The fact that it is not the‘ origin of the fat (vegetable or animal), but rather the P/Sratio that is crucial
lmportance of Fats
33
is often neglected. The P/S ratio of butter is 0.05; that of vegetable coconut fat only 0.02. However, in spite of its vegetable origin, the latter is not considered suitable as an exclusive fat for healthy nutrition. The quantities consumed are low because it is not a basic food but one found only in specialty products. Sunflower oil, on the contrary, is especially suitable (P/S = 5.82;Wirths 1981). Its P/S ratio is so high that the sunflower oil can compensate for higher saturated fatty acid intake in the normal fat supply. More recent analyses led to the recommendation to adjust the proportions of polyunsaturated fatty acids, monounsaturated fatty acids and saturated fatty acids (PUFAIMUFAISAFA) to 1:l:l (MI3 1984). These findings do not call into question prevailing nutrition recommendations regarding linoleic acid as an essential fatty acid. Findings in this area have not changed. However, a stronger positive (lowering) influence of the monounsaturated acids (i.e., predominantly oleic acid) on the cholesterol level than estimated has been found. Oils rich in oleic acid (e.g., rapeseed oil, olive oil) can thus be suitable for a cholesterol-reducing diet as well as those with a high PUFA content (e.g., sunflower oil; see, for example, Laasko et al. 1989). However, because the invisible fats are rich in saturated fatty acids, diet margarines should have a content of saturated fatty acids ~ 2 0 % in order to reach the targeted proportion. Altogether, science today is able to correctly predict the average change of the cholesterol level in the blood when nutrition is changed. Findings to date led the U.S. Federal Health Agency (NIH 1984) to recommend that Americans should reduce their present intake of 40% of calories from fat in their diet to 30%. Moreover, they should limit the intake of saturated fatty acids to ~ 1 0 % of the calorie intake and raise that of polyunsaturated fatty acids to 10%of the calorie intake (but not more). The daily intake of cholesterol should be limited to a maximum of 25&300 mg. The European Consensus-Conference (1986) adopted the American values in their recommendations and added maximum values for the therapy of high-risk persons. (Schwandt 1987). The European Arteriosclerosis Society required further measures (Assmann and Schettler 1987). When examining the cholesterol level, it is essential to take into consideration the intake of the cholesterol itself. An important source is animal products, especially animal fats, which typically contain substantial amounts of cholesterol (Table 1.5). According to a general agreement derived from British legislation, substances with 4 0 ppm are regarded as cholesterol free. Vegetable oils not only have the advantage of reducing cholesterol levels, but they also do not add to the intake of cholesterol (Seher 1987). Thus, with an elevated cholesterol level, nutrition with the correct fat must be balanced with a suitable nutrition plan. Proposals were made to shift the P/S factor in the direction of one, but only sick and high-risk people need to take special care. At present, there are efforts to remove cholesterol from butter to avoid at least one of its detriments (extraction with supercritical COz, Kankare and Antila 1989). The findings in the cholesterol debate were surveyed by Goldberg and Schonfeld (1958), Grundy (1986), and McGandy and Hegsted (1973, among others.
34
Fats and Oils Handbook
Knowledge about the disadvantages of animal fats has continually led to attempts to reduce their presence by changes in animal feed (Leaf and Weber 1988). This applies particularly to the feeding of milk cows. It was possible, for example, to raise the content of n-3 fatty acids in milk fat to 6% by mixing fish oil (Menhaden oil) into the fodder (Hagemester 1989). The passage of the n-3 fatty acids from the fodder to the milk fat was between 35 and 40%. In this special instance, such milk fat is preferred to conventional milk fat from the point of view of nutrition physiology. However, it is uncertain whether it will provide a reasonable alternative considering the conversion factor mentioned above. For about 20 years, nutritionists have concentrated on n-3 fatty acids (a-3 FA), because Bang and Dyersberg (1975) observed that the Greenland Eskimos, in spite of their extensive consumption of fat, suffered less from heart disease than the Danes. Their biochemical values were very close to those of a Japanese population of fishermen, who also subsisted mainly on marine animals (Yamori et al. 1985). The Eskimo diet (marine oils) is rich in n-3 fatty acids. In marine oils, n-3 fatty acids are almost exclusively long-chain acids. It is estimated that the required daily quantity of these fatty acids is 0.2% (Benadt 1988). The daily intake with Western food is -1 g of n-3 fatty acids. Investigations concerning the advantages and possible disadvantages of these acids have not yielded any conclusive results to date and are still in progress. However, studies in Europe indicate (Kromhout et al. 1985, study in Zutphen, The Netherlands) that there is a connection. There appears to be definitive evidence that the daily consumption of n-3 fatty acids must exceed an average of 2 g to achieve an effect (Driss and Darcet 1988); this is equivalent to daily consumption of the relatively high amount of 200 g of fish. Findings are not sufficiently advanced to recommend the intake in concentrated form, e.g., in capsules, or to incorporate such fatty acids into fat products. Moreover, the quantity that would then have to be used to ensure the effect is rather high, although their efficiency is 20 times higher than that of linoleic or linolenic acid (Singer). It is also questionable whether a continuous nourishment with foods rich in n-3 fatty acids could be harmful. A survey of the state of the discussion about fatty acids from fish oils was given by Harris (1989). The concern that polyunsaturated fatty acids may be susceptible to oxidative damage and might develop into carcinogenic substances within the body is repeatedly expressed by scientific outsiders, but is unfounded. Dormandy (1983) determined that in-vivo oxidation of fatty acids does not take place. Within the body, as in the intact seed, they are protected by the body’s antioxidants. The consumption of fats oxidized (peroxides) by inappropriate handling is also not dangerous. Fats containing harmful concentrations of oxidized fatty acids are not edible as a result of their very bad taste. The fat supply itself constitutes another problem. Fat consumption in the industrial nations today satisfies between 35 and 45% of our energy demand, and in the developing countries between 10 and 20%. The worldwide consumption of fat during the mid-1970s was 12.5 kg per capita per year. In Germany, for exam-
lrnportance of Fats
35
ple, more than three times that amount of fat was eaten. The level of fat consumption parallels the rise in standard of living. Thus, the consumption of animal and vegetable fats and oils in the U.S. more than doubled between 1950 and 1985 (Hammond 1988). In contrast with Germany, however, there was a strong shift to vegetable oil consumption. This is disquieting in two respects. As a rule, the intensity of physical labor decreases as the standard of living rises. Recommendations for the daily intake of calories are as follows: 2000kcal 2300 kcal 3200 kcal
(8370k.l) (9620 k.l) (13390 k.l)
for light work, for medium work and for hard work.
This would mean that even a constant consumption of fat would be too high, because surplus energy is conveyed to the body. On the other hand, fat consumption is rising because fat makes food tastier. It is recommended that calorie demands met by fats in the diet range between 25% and a maximum of 35%. Adding to this negative trend is the fact that much of the fat in foods is in the form of hidden fats. Hidden fats are fats contained in other foods and consumed unconsciously. This applies especially to meat, sausage, and cheese (c$ Table 1.2). Studies in the Federal Republic of Germany in 1982 showed that >50% of the fats consumed was in the form of hidden fats. In addition to the fact that the population is not aware of which foods contain what quantities of fat, it becomes increasingly more apparent that the predominant part of hidden fats consists of animal fats with a high proportion of saturated fatty acids. In this manner, the P/S quotient is lowered (which is negative), and no essential fatty acids are consumed. When the calorie supply is reduced, which usually occurs by lowering the amount of visible fats, the negative tendency is further intensified. Attempts to exchange the saturated fats in foods for highly unsaturated ones are constantly thwarted by protectionist legislation (c$ Chapter 1.5). Greater freedom remains unattainable as a result of the harmonization of the respective laws and regulations within the European Union. Besides the fat-associated substances, minor components are important as well. Some of these have negative effects but are found only in the grain; in that case, they cannot be used as feed for all animals. Experiments have shown that gossypol from cottonseed causes pathologic changes in the testicles of mammals that can lead to sterility (Berardi and Goldblatt 1980, Xue 1980). For this reason, it was tested in China as a contraceptive for males. Its effect is attributed to the generation of oxygen radicals. Refined cottonseed oil does not contain gossypol, thus the attention is directed exclusively toward cotton grain. Fat-soluble vitamins have considerable positive influences. Vitamins A and the family of carotenes possessing vitamin A activity, as well as vitamins D and E, are fat-soluble and water-insoluble substances. Consequently, these substances occur together only with fat, i.e., they can be conveyed to the body only via fat-containing
36
Fats and Oils Handbook
food (Sebrell and Harris 1954). Vitamin A is necessary for regular growth, normal eyesight and procreative capacity. Moreover, it plays an important role in the stability of the cell membranes. Vitamin D ensures the correct calcium level in serum and is necessary for the normal growth of bones. Vitamin E protects vital substances such as unsaturated fatty acids, vitamins A and D, as well as thiol groups in enzymes from oxidation (c$ Chapter 2.2). In contrast to the essential fatty acids, vitamins occur in animal and vegetable fats, although vitamin E is present in larger quantities only in vegetable fats. Thus, with a normal food supply, deficiency is not an issue. Vitamin E represents one of the essential radical scavengers in lipid membranes (Pryor 1976). It was applied in clinical trials to combat illnesses caused by oxidation processes. These trials were rather successful (Bieri et al. 1983). A protective function towards DNA was observed (Beckmann et al. 1982), as was greater endurance in test animals (Davies et al. 1982). Other experiments suggest that vitamin E has anticarcinogenic effects as well (Wang 1982). p-Carotene also has antioxidant effects. It intercepts singlet oxygen, which has a strong mutagenic effect as a result of its high reactivity (Foote 1988, Krinsky and Deneke 1982). Experiments have also shown a protective function against the development of cancer (Mathews-Roth 1982, Rettura et al. 1983). A survey of the multiple fields of applications was made by Ames (1983). It is assumed that fatsoluble vitamins are helpful against oxidized metabolites of cholesterol that were observed to contribute to the development of heart disorders (Yagi et al. 1981). Apart from the anticarcinogenic effect of some of the minor components in fats, studies reporting a direct correlation between the fat intake and the frequency of breast and colon cancer continue to appear (Doll and Pet0 1981, Fink and Kritchevsky 1981, Kinlen 1983, NRC 1982). To date, it has not been possible to establish a direct connection. However, there seem to be more indications that the frequency of cancer generally rises with caloric intake. Only in this connection could fat be a role-playing factor.
1.5 Fats and Oils in Legislation The legislation in effect for this branch of industry applies to the products, thereby directly affecting the consumer and producer. The legislation also applies to the production process. 1.5.1 Product-Related Legislation
Many foods are narrowly defined by laws and regulations concerning their composition, mode of production and qualities. Not everything can (or should), however, be regulated by laws. In addition to legal directions, certain modes of behavior (principles of the responsible producer, good manufacturing practice) have emerged and various codes have been formulated, e.g., the Codex Alimentarius of the FAO, and the Leitsatze des Deutschen Lebensmittelbuches (Guiding Principles of the German Food Book) is an example for Europe. These guiding principles are
Importance of Fats
37
not legally binding but are consulted to define honest trading practice and are the foundations of legal decisions in case of controversy. In many cases, they fill the gaps where neither laws nor special regulations exist or give specifications which exceed legal limitation or description. In principle, there can be two motivations for product-related legislation in the domain of food, i.e., the protection of the consumer and citizen and aspects of economic policy. The protection of the consumer can include matters of health, but also protection from fraud. Aspects of economic policy might include emergency situations (war/postwar), partial attempts at selfsufficiency, or the preservation of an agriculture that is no longer competitive under the conditions of the world market. Concerning health risks, the protection of the consumer is always foremost and falls under the duties of the state within the obligation of public care. Frequently, however, the extent and the character of the measures to be taken are under discussion. Fats and oils, as such, fall under the common rules on maximum values of environmental pollutants. In contrast, there are very detailed rules for the products described in Chapter 8 (butter, margarine and mayonnaise). Legislative interventions motivated by health policy in the field of oils and fats have rarely occurred. An example is the regulation regarding the maximum content of erucic acid; however, this has been rendered superfluousby the cultivation of new types. For ingredients, processing aids, and additional substances, there are two basic approaches. One is that all substances that are not deemed harmful can be admitted, and consequently, harmful substances are prohibited or restricted in their quantity. The other is that everythrng that is not explicitly allowed is prohibited. The EC follows the second principle in many fields (regulation about the admission of food additives). This is a policy motivated by a desire for control rather than one of protection from danger, a fact that becomes immediately obvious when questioning why an ingredient is prohibited in one food but allowed in another. With few exceptions, one and the same substance cannot be at once both harmful and harmless. Trade policy is aimed primarily at the protection of agriculture. Due to their structure, the European States are not able to offer all agrarian products at world market prices. Therefore a certain protection is advisable to maintain at least partial independence.It must be considered, however, that excessive protection also prevents the seizing of opportunities. Legislation usually intervenes in times of emergencies. This happens primarily by means of regulations or guiding principles. Even more so than laws, guiding principles are a mirror of their times. During World War 11, they gave reliable information about the supply situation in Germany because regulations were in each case adapted to it. Thus, according to the German guiding principles for mayonnaise of 1941, salad mayonnaise, for example, had to contain only 20% oil instead of 50%, and milk and fish protein were allowed as substitutes for egg yolk. 1.5.2 Production-Related Legislation
In the production of oils and fats by means of mechanical or solvent extraction, in their processing or refining, and in the making of products containing fat, the producer
Fats and Oils Handbook
38
is subject to many general legal regulations concerning emissions or sewage, for example, but also to several highly specialized injunctions. These directives can differ widely depending on the location of the business, and even within one country from community to community. Dealing with these regulations in a detailed way and on a universally valid basis is possible but would exceed the scope of this book.
1.6 Fats as Industrial Raw Materials A relatively large portion of edible fats and oils is utilized for industrial purposes
(not nutrition). Often batches that do not comply with the strict demands for foodgrade raw materials are used for this purpose. Worldwide, the production of oleochemicals is -9-10 million ton (Seidel 1983), and a wide range of products is produced (Fig. 1.25). For some oils and fats, the portion not used for nutrition is considerable (Table 1.7). In 1981, after a continuous rise since the first energy crisis in 1973, the price of the raw material ethylene had climbed beyond that of soybean, coconut and palm oils, and tallow (Fig. 1.26). At that time, large chemical companies tried to secure their position by acquisitions that would provide a position in this raw material market. In the meantime, ethylene prices have fallen again. This interest was also motivated by a desire to remain in the market and exert influence on the types of new crops cultivated exclusively for the food industry. Erucic acid is relatively easily modified chemically. With the transition to rape OillFat
Olymml Resins EmulabIan C e i l U I o ~produdion o i for n ~ ~POlyOlS mineral oil produdion CosmsUcs Glymml Eaten Detergents
Auxiliary ~
Fatty h i n o s
Fatty Alcohols
Fatty Amldes
Adddiws for coal flotaUon Anti mnorives Sufladsntr Emubifiers
Esters with polyethybnglycd Fabric deanen Non-ionogenic emuI8hien
Detergents Emutsifien Fire extinguishen
Animal feed soaps Chemicsb fcfthe mineral oil and rubber industry
Fig. 1.25. Simplified flowchart of oleochemicals production.
Importance of Fats
39
TABLE 1.7
Uses of Vegetable Oil for Nonfood Purposesa Oil type and nonfood usage (YO) 0.25
Soybean oil Palm oil Palm kernel oil Rapeseed oil
10 10 40
Coconut oil Castor bean oil Linseed oil Tung oil
55 100 100 100
Type of usage (% of total nonfood usage) 36
Fatty acids Animal feed Soap Other
29 15 13
Paints Lubricants Polymers
3 2 2
aSource: Pryde and Rotfus (1 989).
species with low erucic acid content, the chemical industry was robbed of an important raw material. From then on, the prices for a low tonnage of rape with a high portion of erucic acid (HEAR) were above those of LEAR oil. Today crambe oil, which also possesses 55-60% of erucic acid, is considered to be a replacement for HEAR. Mustard seed oil can also be used. Taken as a whole, the production of raw materials in fat chemistry has developed from synthetic to natural raw materials, and this trend is continuing (Table 1.8). 70
-
.
0
Fig. 1.26. Price relation between soybean oil and ethylene.
Fats and Oils Handbook
40
TABLE 1.8 Oleo Chemicals and Their Raw Material Sourcesa Fatty acids
Amount (1 OOO ton) YO Natural YOSynthetic
Fatty alcohols
Glycerol
Fatty arnines
U.S.
Europe
U.S.
Europe
U.S.
Europe
U.S.
Europe
lo00
650
160
195
350
210
110
64
98 2
99 1
57 43
72 28
16 84
37 63
85 15
100 0
dSource:Seidel (1 983).
1.7 Fats and Oils as a Source of Energy In the course of history, it has been demonstrated repeatedly that fats are suitable as a source of energy. Rudolf Diesel had already determined that his engines could run on edible oil. As early as 1900, a Diesel engine powered by peanut oil was shown at the world’s fair in Paris (Nitske and Wilson 1965). However, the true potential of renewable raw materials may lie not in the combustion of the oils known today but in the utilization of new species. When we compare the qualities of vegetable oils with Diesel fuel, we notice that the caloric value is -10% below that of Diesel oil (Table 1.9). Among renewable raw materials, vegetable oils exhibit the most favorable relation between energy yield and energy investment (Table 1.10).Because vegetable oils have always been used in part as a source of energy, the idea is not new. However, the demands on the oils for use in modem engines have changed compared with those for illumination purposes. A study by Apfelbeck (1988) shows which fuel parameters must be met for today’s vehicles (Table 1.11). When comparing the prices for Diesel and soybean oil, we see that for the time being, there is no point in using edible oils and fats for combustion purposes. TABLE 1.9 Comparison of Diesel Oil, Rapeseed Oil, Sunflower Oil and Their Methyl Esters Sunflower
Caloric value (MJ/kg) Density (dcrn) Viscosity (cP,20°C) Cloud point (“C) Flash Point (“C) Ash (Yo) Sulfur (YO) Sulfur (rnol%) Reference
Diesel oil
Crude oil
Methyl ester
4246 0.835 3.9 -0.6 50-77 0.01 -0.27 -0.1 4 Shell
39.28 0.925 34.7 -6.6 215.5 0.04 0.1 2
40.16 0.880 4.22 0-1 183
-
-
0.01
-
Quick 1989
Rapeseed Crude oil
36.7-37.7 0.91-0.92 68-97.7
-
Methyl ester
37.02-37.20 0.86-0.90 6-9
-
31 7-324 1 1 1-1 75 <0.01-0.5 <0.01-0.05 0.009-0.01 2 0.002-0.006 Bundesurnweltamt 1993
41
importance of Fats
TABLE 1.10 Energy Balance from Renewable Source9 Source
Energy balance investdyielded
Energy yield net ( a h a )
2.8 2.7 2.5 1.3 1.1
43.3 37.9 58.9 18.4 5.2
Sunflower oil Rapeseed oil Ethanol from sugar beets Corn Wheat a%urce: Pernkopf (1984)
TABLE 1.11 Requirements for Fuel Ester9 Free fatty acids Mono-, diglycerides Glycerol Methanol Water Metals (each)
<0.2% <0.1 Y o
=%Source: Apfelbeck (1988)
In this comparison, it has to be considered that in Europe, taxes constitute the largest portion of the price for vehicle fuels. The U.S., with its much lower taxation rate, thus presents a better opportunity (Fig. 1.27). Considering the respective quantities, it becomes obvious that vegetable oils could cover only a small fraction of the demand. Consequently, greater utilization would lead to a considerable shortage of oils for consumption, and thus to rising prices. In spite of these rather poor prospects of finding an economically viable alternative to mineral oil fuels in today’s vegetable oils, experiments partially supported by the German Federal Department of Research and Technology are underway under strictly controlled circumstances to determine the behavior of Diesel engines suited for rapeseed oil (Anonymous 1988). Although experts such as the Federal Agency for the Environment released a study concluding that this route is not viable, new plants have been built. In Austria, for example, more than 10 plants had already been erected; only one is currently still operational at a low level. Even if a redistribution of the subsidies is effected to support these projects, they can hardly be successful given the current low price for mineral oil. The fanners’ associations stated that in 1990, 80% of the arable land of the Federal Republic of Germany would suffice for the production of food. For inactive areas, subsidies of 700-1440 German marks subsidies per hectare are paid currently. Cultivated with rape, these areas would suffice to meet 3 4 % of the annual
Fats and Oils Handbook
42 70 60
.
ziu d
g40 v)
2. 30 8
!5
20
10
0
Fig. 1.27. Price relation between diesel oil and soybean oil in the US.
demand for fuel oil or 10-12% of the demand for Diesel oil (Stover 1988). However, this could be done in a reasonable way only with smaller, decentralized, simple oil mills (delivery by the farmers themselves). Because larger amounts of fat remain in the meal in such mills (pressing only, without preliminary treatment of the seed), higher prices for meal would have to be charged for the process to be economical. This might indeed be possible because such meal has a better value as fodder in terms of energy supplied, but it is doubtful whether the market would honor it. Altogether, this scenario is interesting, but inefficient for the time being. As an example of oil fruits that are not currently in use, a research project conceming the purge nut can be examined. The purge nut is a spurge plant and grows even in tremendous heat and in the poorest soils. The nut was rediscovered by scientists of the Society for Technical Cooperation at the Western tip of Africa. (DPA 1987). An engine powered with its oil ran successfully during a long-term trial. The oil was described as early as 1830 by Geiger, who used it as a laxative. According to scientists, the nut can be used as a raw material for soap production, as a source of energy, and as a supplier of raw chemicals. New raw materials can change the situation, although considerable costs must be expected when deriving the fadoil Erom the raw materials; the chances of commercialization are low at present, considering the present supply of mineral oil on the world market. Another interesting opportunity is to make use of deserts or semi-deserts by growing plants at a very low density and to organize the cultivation effectively over the entire area that remains otherwise unused. However, suitable plants have not yet been found. With an insufficient oil content, used-up auxiliary substances and garbage removal pose sigmficant problems.
importance of Fats
43
1.8 New Sources of Raw Material New sources of raw materials can open up in two different ways. It is possible to use new crops for oil supply, especially for industrial use. In addition, it is feasible that new plants can be adapted to new requirements by means of cultivation or by genetic modification. More recent contributions to this discussion (e.g., Richtler and Knaut 1991) cover the entire ecological balance in their reflections, for example, the CO, balance, and as a result, new aspects might emerge. 1.8.1 New Plants Through Plant Breeding or by Genetic Modification
The possibility of modifying plants by means of cultivation is virtually unlimited. All types existing today have been generated via a selection process that has lasted for centuries. However, with today’s technology, it is possible to accelerate this selection mechanism or even to “construct” plants within certain limits. A very good example for the conventional cultivation of an oil plant with new qualities is the “Double-Zero-Rape.’’ First, the fatty acid composition of this type of rape was modified in such a way that it contained (virtually) no erucic acid; then, bitter glucosinolates were removed by cultivation to make the meal more suitable as animal feed. Plans to remove gossypol from cottonseed by cultivation proceed in the same direction. It would make this oil type more applicable, because here, too, the use of the meal could be optimized. However, changing the composition of fatty acids can have other objectives as well. By ingeniously cultivating and blending the raw materials, the amount of oil that has to be modified could be reduced considerably. In the most favorable case, oils with ideal compositions could be processed into products directly from the oil mill. Opportunities lie in the cultivation of types with such an amount of saturated fatty acids that hardening is no longer necessary. An ideal distribution of fatty acids in the triglyceride can make interesterifkation obsolete. Additionally, new plants may yield qualities that render refining at least partially superfluous. Many other improvements are conceivable, but most of them will be achieved in a reasonable time only by means of gene technology. Whether this technology will be accepted by the public-at least in Europe-is doubtful. Achieving these aims would reduce production costs and improve the image perceived by the consumer Species of safflower that possess oil rich in oleic acid already exist; the same is true for sunflower types that contain >80% oleic acid (US.Patents 4627192, 1986, and 4743402, 1988). With increasing frequency, these cultivars are covered by patents, so that efforts of the growers become more interesting on a commercial level. In Canada, rape already provides >50% of the raw materials for margarine. The disadvantage of rapeseed oil is its relatively high content of linolenic acid. Here also, the cultivation of a species with a linolenic acid content ~ 3 % has been successful (Allelix Crop Technology, Canadian Patent 1989). In the new species, linolenic acid is almost completely replaced by oleic acid. The same problem exists for soybeans. Cultivars of soybeans with a low concentration of linolenic acid have been successful. Species with a higher concentration of stearic acid were also found.
Fats and Oils Handbook
44
In Chapters 1.4 and 4.3.2, gossypol is mentioned as an undesirable ingredient of cottonseed. Cotton that lacks gossypol-capsules has been cultivated successfully. However, the problem is not yet entirely solved because the new plants or rather their seeds are very vulnerable to infestation with AspergiZZusJuvus (cf.also Chapter 4.3.11; Campbell 1983). Among others, Rtibbelen and Hirsinger (1982 and 1987) reported on methods applied today to create tailor-made plants; more examples are given in Chapter 4.
1.9 Fat Substitutes It has been known for a long time that people in the industrial nations consume too much fat. The main reason is that fat is an excellent carrier of flavors; its physical qualities make food smooth, thereby increasing the pleasant taste considerably. Compared with other food ingredients, fat has more than twice the caloric content. Thus, in the attempt to limit the caloric supply, reducing the intake of fat has the strongest effect (per unit of weight). For these reasons, there have been attempts to find substitutes with reduced or zero caloric value. This is much more difficult than finding a substitute for sugar, because the applications of fat deviate strongly from those of sugar. Saccharin was found early on and later Cyclamate, and some years ago, Aspartame and Acesulfam. Attempts to find a substitute for fat culminated at the end of the 1980s. LaBarge (1988) named the main classes of substances that might serve as lowcalorie oils and as substitutes.These include the following: combinations of water and surface active substances (surfactants), including special proteins and polysaccharides with absorption capacity, compounds such as acetoglycerides and medium-chain triglycerides with a reduced caloric value, compounds that deviate considerably in structure from triglycerides, such as paraffin and silicone, compounds without calories with fat-like qualities, produced mainly through modified ester bonds, e.g., fatty esters of polysaccharides. Only in 1929 did Channon and Collison produce the first reliable study concerning the absorption of fats in the body. Strycker (1941) and Deuel(l948) compiled extensive material by feeding rats. After these experiments indicated which substances are not resorbed, research could be directed systematically. 1.9.1 Carbohydrates
There are some products on the market that could replace fat in their applications. As a rule, they can be used only in low-temperatureapplications and those in which fat is employed to reach a good, smooth texture. They are not suitable as a heat transmitter in roasting and frying. Also, they do not develop the respective flavors. Their primary
Importance of Fats
45
effect is to absorb water and give a smooth feeling in the mouth. Examples of such products are polydextrose (Pfizer), which, however, can have a laxative effect, N-Oil (trademark of National Starch Co.) or maltodextrine. Vogt (1987) demonstrated the qualities of a fat substitute based on starch, i.e., enzymically modified potato starch that can be used in place of fat in such foods as stuffings or milk products. 1.9.2 Polycarbonic Acid Esters
Hamm (1984) conducted experiments on polycarbonic acid esters as a fat replacer for margarine and mayonnaise. Margarine was produced with trialkoxy carballylate and jojoba oil (LaBarge 1988). With jojoba oil, however, margarines were not convincing. Trialkoxytricarballylate (TATCA) showed excellent qualities, but failed in the animal-feeding tests conducted to date. 1.9.3 Polyglycerol Esters and Ethers
Polyglycerol esters can easily be produced (Babayan 1968, Mcintyre 1979), but in feeding tests, it did not appear that the caloric value was lower than that of triglycerides. These substances were also not well suited for baking (Babayan 1982). Instead of triglyceride esters, triglyceride ethers can also be synthesized. Several patent applications have been submitted. 1.9.4 Proteins
In 1988, “Simplesse” (trademark of NutraSweet), a fat substitute based on protein was announced by the NutraSweet company. Simplesse is produced by decomposing long-chain proteins into small pieces of -0.001 mm in diameter. The pieces are so small that 50 billion fit on a teaspoon (Wagner 1988). The small particles exhibit the same creaminess as fat, deceiving the taste organs. The sensory sensation of creaminess is actually not related to classes of substances like triglycerides, as was believed for a long time. It is due to particle size and shape. Simplesse is a protein and therefore all applications involving strong heating are impossible. Because its effect is based on a deception of the tongue, Simplesse can be applied only where fat creates a creamy impression in the products. In 1989, NutraSweet intended to introduce Simplesse without examination by the FDA, claiming that it is a food only in “shredded” form. The FDA, however, insisted on a procedure for its approval, which required some time. In the meantime, Simplesse is on the market. 1.9.5 Sucrose Polyesters (SPE)
In the 1950s and 1960s, the basic work for the application of sucrose polyesters had already been done by Rizzi and Taylor (1976). They esterified methyl esters of soybean oil fatty acids with sugar. For synthesis, potassium salts of the fatty acids are formed and are converted with the aid of sodium hydride. Volpenheim (1985)
Fats and Oils Handbook
46
received a patent for replacing sodium hydride with potassium carbonate. For the time being, SPE are the only fat substitutes that can replace fat in practically all applications. Because of their good heat stability, they can also be applied in areas in which the above-mentioned substances fail. In the literal sense, they are simply “fat substitutes.” A major obstacle to their introduction was that SPE have a strong laxative effect when a certain quantity is consumed. Procter and Gamble announced that the problem could be solved by adding an antidote. Meanwhile, the problem has been solved without such an antidote. In addition to Procter and Gamble, Unilever, Mitsubishi, and Dai-Ichi have also worked on SPE (LaBarge 1988). The initial patent held by Procter and Gamble expires in 1998, but will most likely be prolonged by increasing numbers of new patents concerning particular procedures for production. Bernhardt (1988) described the production (Fig. 1.28). Instead of the three fatty acids esterifled to glycerol, sugar is able to bind eight fatty acids. In SPE,the sugar contains six, seven or eight fatty acids, because complete esterifcation of all hydroxyl groups has not yet been successful. SPE are miscible with fadoil and insoluble in water (Mattson 1976). They cannot be resorbed by the body because the body does not possess enzymes to split them. A survey of the possibilities of application, advantages and problems of SPE was made by Toma et al. (1988). When this book was edited in German, the question whether SPE (termed Olestra by Procter and Gamble) could be introduced depended mainly on whether legislative authorities (FDA, Food and Drug Administration, BGA, Bundesgesundheitsamt/ FaffOil
I
Esterriinl,
]
<<< Methanol <<< ~
>>> G cerol
Fatty acid methyl ester
,
Neutralization
I
Bleaching
I
I
Deodorization
I
SPE (fully refined)
Fig. 1.28. Flow chart of SPE production.
Importance of fats
47
German Federal Health Agency) would license it. Licensing is necessary because, according to the prevailing definition, SPE is not a food, but rather a food additive. Licensing had been applied for at the FDA in 1988. Meanwhile Olestra (trademark of Procter and Gamble) has been approved for a certain range of snacks. Application in Europe is still doubtful. 1.9.6 Polymeric Siloxanes
Polymeric siloxanes as well as substituted phenyl-methyl-polysiloxaneswere also investigated as possible fat substitutes. The experiments were conducted at the Institute for Human Nutrition at Michigan State University and did not show any side effects in rats. Experiments in kitchen applications (e.g., frying) were conducted by Zabik (1987 and 1989) and Morehouse (1987 and 1989) and gave satisfying results. The FDA has not yet approved these substances. 1.1 0 References Aaes-Jorgensen, E., (1961) Essential Fatty Acids, Physiol. Rev. 41, 1-5 1. Aaes-Jorgensen, E., (1966) Unsaturated Fatty Acid Isomers in Nutrition, Nutr. Rev. I , 24. Adam, D.J.D., Hansen A.E., and Wiese, H.F., (1958) Essential Fatty Acids in Infant Nutrition 11. Effect of Linoleic Acid on Caloric Intake, J. Nutr. 66, 555. Ahrens B., (1957) The Influence of Dietary Fats on Serum Lipid Levels in Man, Lancet I, 943.5. Ahrens, B., The Effect on Serum-Lipids of a Dietary Fat, Highly Unsaturated, but Poor in Essential Fatty Acids, Lancet I, 115 (1959). Ames, B.N., (1983) Dietary Carcinogens and Anticarcinogens-Oxygen Radicals and Degenerative Diseases, Science 221, 1256-1264. Anonymous, (1988) Rapsol als Treibstoff, Chemische Rundschau 40, 10. Anonymous, (1987) Malaysia Defends Palm Oil, Food Manufacture Int. SeptJOct., 10. Apfelbeck, R., private information to Stover 1988, citation from Stover see below. Assmann, G., and Schettler, G., (1987) Ein Strategie-Konzept der Europaischen Arteriosklerose-Gesellschaft: Die Pravention der koronaren Herzerkrankung, Deutsches Arzteblart-Arztliche Mitteilungen 84, 45-48. Babayan, V.K., and McIntyre, R.T., (1968) Preparations and Properties of Some Polyglycerol Esters of Short and Medium Chain Length Fatty Acids, J. Am. Oil Chem. SOC.48, 307. Babayan, V.K., and McIntyre, R.T., (1982) Polyglycerol Esters: Unique Additives for the Bakery Industry, Cereal Foods World 27, 510. Bang, H.O., and Dyersberg, J., (1975) Haemostatic Function and Platelet Polyunsaturated Fatty Acids in Eskimos, Lancet 2, 433-435. Beckman, C., Roy, R.M., and Sproule, A., (1982) Modification of Radiation-Induced SexLinked Recessive Lethal Mutation Frequency by Tocopherol, Mutat. Res. 105, 73-77. BenadC, A.J.S., (1988) Editorial Comment: Essential Fatty Acids, SA Tijdskrift voor Voedselwetenschap en Voeding I , 2. Berardi, L.C., and Goldblatt, L.A., (1980) Toxic Constituents of Plant Foodstuff; in Toxic Constituents of Plant FoodstufJ; (Liener I.E., ed.), pp. 183-237, Academic Press, New York.
48
Fats and Oils Handbook
Bergstrom, S.,and Samuelsson, H., (1965) Prostaglandins, Annu. Rev. Biochem. 101, 34. Bernhardt, C. A,, (1988) Olestra-A Non-Caloric Fat Replacement, Food Technol. Int. Europe 176. Bieri, J.G., Corash, L., and Hubbard, V.S., (1983) Medical Uses of Vitamin E, N. Engl. J. Med. 308, 1063. Burr, G.O., and Burr, M.M., (1929) A New Deficiency Disease Produced by the Rigid Exclusion of Fat from the Diet, J. Biol. Chem. 82, 345-367. Campbell, C., personal information to Ames B.N. (1983), citation from Ames see above. Channon, H.J., and Collison, G.A., (1929) The Unsaponifiable Fraction of Liver Oils. IV. The Absorption of Liquid Paraffin from the Alimentary Tract in the Rat, J. Biochem. 23, 676. Childs, M.T., (1993) Fish, Dietary Importance of Fish and Shellfish, in Encyclopaedia of Food Science, Food Technology and Nutrition, p. 1879, Academic Press, London. Davies, K.J.A., Quintanilha, A.T., Brooks, G.A., and Packer, L., (1982) Free Radicals and Tissue Damage by Exercise, Biochem. Biophys. Res. Commun. 107, 1198. Deuel, H.J., (1948) The Digestibility of Rapeseed Oil in the Rat, J. Nutr. 35, 295. DFG, (1983) Deutsche Forschungsgemeinschaft, Zur Bedeutung d e r Fette in d e r menschlichen Entiihrung, WissenschaftlicheArbeitspapiere, Verlag Chemie, Weinheim. Doll, R., and Peto, R., (1981) The Causes of Cancer; Quantitative Estimates of Avoidable Risks of Cancer in the United States Today, J. Natl. Cancer Inst. 66, 1191-1308. Dormandy, T.L., (1983) An Approach to Free Radicals, Lancet 2, 101&1014. DPA, Kraftstoff aus der Nub, from Siiddeutsche Zeitung 4.5.1987. Driss, F., and Darcet, P., (1988) Effet des Huiles de Poison Riches en Acides Gras n-3 sur les Facteurs de Risque des Maladies Cardio-Vasculaires, Revue Frangaise des Corps Gras 35, 7-1 1. Dyerberg, J., Bang, H., and Home, N., (1975) Fatty Acid Composition of the Plasma Lipid in Greenland Eskimos, Am. J. Clin. Nutr. 28, 958-966. Erman, A., and Ranke, H., (1923) Agypten und das agyptische Leben im Altertum, Verlag J.H.C. Mohr, Tubingen. von Euler, US., (1934) Zur Erkenntnis der pharmakologischen Wirkungen von Nativsekreten und Extrakten miinnlicher accessorischer Geschlechtsdriisen, Naunyn-Schmiedeberg 's Arch. Exp. Path. P h a d 78, 175. von Euler, U.S., (1935) iiber die spezifisch blutdrucksenkende Substanz des menschlichen Prostata und Samenblasensekrets,Klin. Wschr. 14, 1182. FAO/WHO (1977) Dietary Fats and Oils in Human Nutrition. F A 0 Food and Nutrition Paper no. 3, Food and Agriculture Organization of the United Nations, Rome. Fink, D.J., and Kritchevsky, D., (1981) Workshop on Fat and Cancer, Cancer Res. 41,3677. Foote, C.S., (1982) Absorption of Singlet Oxygen by p-Carotene, in Pathology of Oxygen, (Autor, A., ed.), pp. 2 1 4 , Academic Press, New York. Friedeberg, A S . , Milking Taxpayers or Making Milk Quotas More Market Oriented, Speech delivered at the 29th Annual General Meeting of the International Federation of Margarine Associations, Oslo, 2. Juni 1986 (Unilever Publication). Friedeberg, AS., Protectionist Rebalancing or Market-Orientated Reform, The EC's Oils and Fats Policy in Focus, Speech delivered at the 10th Anniversary Conference of PORIM, Kuala Lumpur, 1989 (Unilever Publication). Friis-Hansen, B., (1965) in Humun Body Composition, (Brozek, J., ed.),p. 191, Pergamon, Oxford.
Importance of Fats
49
Gander, K.F., (1984) Die Fettversorgung des Menschen aus wirtschaftlicher und technologischer Sicht, Fette Seifen Anstrichrn, 86, 1. Geiger, P.L, (1830) Handbuch der P h a m z i e , Heidelberg. Geigy, J.R. AG, Pharma Basel, Documenta Geigy, Wissenschaftliche Tabellen, 7.Auflage. Goldberg ,C., and Schonfeld G., (1985) Effects of Diet on Lipoprotein Metabolism, Annu. Rev. Nutr. 5, 195-212. Gottenbos, J.J., (1985) in The Role of Fats in Human Nutrition, (Herausgeber Padley, F.B., and Padmore, J. eds.), pp. 117-131, Ellis Howard,Chichester. Gottenbos, J.J., (1988) in Dietary Fat Requirements in Health and Development, (BeareRogers, J., ed.), pp. 107-1 19, American Oil Chemists' Society, Champaign, IL. Groen, J., Tjong, B.K., Kamminga, C.E., and Willebrands, A.F. (1952) The Influence of Nutrition, Individuality and Some Other Factors, Including Various Forms of Stress, on the Serum Cholesterol. Voeding 13, 556. Gmndy, S.M., (1986) Cholesterol and Coronara Heart Disease, A New Era, State of the M e v i e w , J. Am. Med. Assoc. 256,2849-2858. Hagemeister, H., Precht, D., Franzen, M., and Barth, C.A. (1989) Transfer von omega-3Fettsauren in das Milchfett von Kiihen, Proceedings of the Annual Meeting of DGF, Miinster, 1989, p. 22. Hamm, D.J., (1984) Preparation and Evaluation of Trialkoxytncarbakylate, Trialkoxycitrate, Trialkoxyglycerylether, Jojoba Oil and Sucrose Polyester as Low Calorie Replacements of Edible Fats and Oils. J. Food Sci. 49, 419. Hammond, E.G., (1988) Trends in Fats and Oils Consumption and the Potential Effect of New Technology, Food Technol. (Jan.), 117. Hansen, A.E., Haggard, M.E., Boelsche, A.N., Adam, D.J.D., and Wiese, H.F., (1958) Essential Fatty Acids in Infant Nutrition 111. Chemical Manifestations of Linoleic Acid Deficiency, J. Nutr. 66, 565. Hanssen, E., and Wendt, W., (1965) Die Geschichte der Lebensmittelwissenschaft, in Handbuch der Lebensmittelchemie, vol. 1, Springer Verlag, Berlin. Harris, S.W., (1989) Fish Oils and Plasmalipids and Lipoprotein Metabolism in Humans: A Critical Review, J. Lipid Res. 30, 785-807. Holman, R.T., (1961) How Essential Are Fatty Acids? J. Am. Med. Assoc. 178, 930-933. Holman, R.T., (1963) Symposium on Human Calcium Requirements, J. Am. Med. Assoc. 185, 588-593. Holman, R.T., Caster, W.O., and Wiese, H.F., (1964) The Essential Fatty Acid Requirement of Infants and the Assessment of Their Dietary Intake of Linoleate by Serum Fatty Acid Analysis, Am. J. Clin. Nutr. 14, 70-75. Hunter, J.E., (1989) Scientists Discuss Dietary Fatty Acids. J. Am. Chem. SOC. 66, 1251-1256. Kankare, V., and Antila, V., (1989) Extraktion von Milchfett mit iiberkritischem Kohlendioxid, Fat Sci. Technol. 91, 485. Kinlen, L.J., (1983) Fat and Cancer, Br. Med. J. 286, 1081-1082. Kinsella, L.W., Partridge, J., Boling, L., Margen, S . , and Michaels, G., (1952) Dietary Modification of Serum Cholesterol and Phospholipid Lev&, J. Clin. Endocrinol. 12, 909. Krinsky, N.I., and Deneke, S.M. (1982) Interaction of Okygen and Oxy-Radicals with Carotenoids, J. Natl. Cancer Inst. 65, 205-210. Kromhout, D., Bosschieter, F., and Goulander, C., (1985) The Inverse Relation Between Fish-Consumption and 20-Year Mortality from Coronary Heart Disease, N. Engl. J. Med. 312, 1205-1209.
50
fats and Oils Handbook
Laasko, I., Seppben-Laasko, T., Vanhanen, M.D.H., (1989) Effects of Partial Rapeseed Oil Substitution on Serum Cholesterol, DGF Annual Meetin, Miinster, 1989, p. 6. LaBarge, R.G., (1988) The Search for a Low Caloric Oil, Food Technol. 84. Lambert, J.P., (1993) Meat, Dietary Importance, in Encyclopaedia of Food Science, Food Technology and Nutrition, p. 2949, Academic Press, London. Langdon, R.G., and Philips A.H., (1961) Lipid Metabolism, Annu. Rev. Biochem. 30, 189-2 12. Leaf, A., and Weber, P.C.,(1988) Cardiovascular Effects of n-3 Fatty Acids, N. Engl. J . Med. 318, 549. Leonhard E.C., The Economics of the Commercial Tropical Oils, Speech delivered at the 21st World Congress of the International Society for Fat Research, The Hague, October 1995. LRC-CPT, Lipid Research Clinic Coronary Primary Prevention Study, JAMA, Deutsche Ausgabe, 231-255, April 1984. Ludwig, L., (1968) Fett und Erniihrung, p. 49, Internationale Margarine Information, Wien. Macy, I.G., (1949) Composition of Human Colostrum and Milk, Am. J. Dis. Child 78, 5 89-503. Mathews-Roth, M.M., (1982) Photosensitizitian by Porphyrins and Prevention of Photosensitization by Carotenoids, J. Natl. Cancer Inst. 69, 279-285. Mattson, F.H.,,Jandacek, R.B., and Webb, M.R., (1976) The Effect of Nonabsorbable Lipid, SucrosePolyester, on Absorption of Dietary Cholesterol by the Rat, J. Nutr. 106, 747. McGandy, R.B., and Hegsted, D.M., (1975) Quantitative Effects of Dietary Fat and Cholesterol on Serum Cholesterol in Man, in The Role of Fats in Human Nutrition, (Vergroesen, A.J., ed.), Academic Press, London. McIntyre, R.T., (1979) Polyglycerol Ethers, J. Am. Oil Chem. SOC.56, 835A. Melchert, H.U., (1988) Fettsaurespektren ausgewahlter Lipidklassen des Serums bei Vegetariern und Nicht-Vegetariern, Lebensmittelchem gerichtl. Chem. 42, 119. Mertz, D.P., (1983) Butter oder Margarine? Zur Klarung einer Streitfrage, Deutsche Apotheker Zeitung, 123, 465. Mielke, R., (1985) Present and Future Position of Palm and Palm Kernel Oil in World Supply and Trade, J. Am. Oil Chem. SOC.62, 193-197, Mielke T., (1990) Current World Supply, Demand and Price Outlook for Oils and Fats, in World Conference Proceedings, Edible Fats and Oils Processing: Basic Principles and Modern Practices, (Erickson, D.R., ed.), pp. 1-9, American Oil Chemists’ Society, Champaign, IL. INFORM I , 190, (1990), Morehouse, S.E., (1990), citation from Am. J . Clin. Nutr. 46 (1987), and J. Food Sci. 54 (1989). National Institutes of Health Consumers Development Conference Statement 5, no. 7 (1984), in J. Am. Med. SOC.253, 2080-2086, (1985). National Research Council (1982) Diet, Nutrition and Cancer, National Academy Press, Washington DC. Nitske, W.R., and Wilson, C.M., (1965) Rudolf Diesel, Pioneer of the Age of Power, University of Oklahoma Press, Normann, OK. Numa, S., (ed.), (1984) Fatty Acid Metabolism and Its Regulation, Elsvier Science Publishers, New York. Peters, J.P., and van Slyke, D.D., (1946) Quantitative Clinical Chemistry, Williams & Wilkins, Baltimore.
importance of Fats
51
Pimparkar, B.D., (1961) Correlation of Radioactive and Chemical Fecal Fat Determinations in the Malabsorption Syndrome, Am. J. Med. 30, 910-926. Pryde, E.H., and Rotfuhs, J.A., (1989) Industrial and Nonfood Use of Vegetable Oils, in Oil Crops of the World, (Robbelen, G., Downey, R.K., and Ashri A., eds.), McGraw Hill, New York. Pryor, W.A. (ed.),(1976) Free Radicals in Biology, Academic Press, New York. Quick, G.R., (1989) Oil Seeds as Energy Crops in Oil Crops of the World, (Robbelen, G., Downey, R.K., and Ashri, A., eds.), McGraw Hill, New York. R e m a , G., Dattagupta, C., Listowsky, P., Levenson, S.M., and Siefter, E., (1983) Fed. Proc. Fed. Am. SOC. Exp. Biol. 42, 786. Cited from Ames, B.N., Science 221, citation 116, p. 1256. Richtler, H.J., and Knaut, J., (1991) Umwelt und Fettchemie-Eine Herausforderung, Fen, Wissenschaji Technologie 93, 1-12. Rizzi, G.P., and Taylor, H.M., Synthesis of Higher Polyol Fatty Acid Polyesters, U.S. Patent 3.963.699, (1976). Robbelen, G., and Hirsinger F., (1982) in Improvement of Oil-Seed and Industrial Crops by Induced Mutations, pp. 161-170, Int. Atomic Energy Agency, Wien. Robbelen, G., and Hirsinger F., (1983) Fortschritte in der Welterzeugung von Rapssaaten, Fette, Seifen, Anstrichmittel 85, 395-398. Robbelen, G., and Hirsinger F., (1987) Development of New Industrial Oil Crops, Fat Sci. Technol. 89, 563-570. Robbelen, G., Hirsinger F., and von Witzke, S., (1987) Possible Use of Mutation Breeding for Rapid Domestication of New Crop Plants, Int. Atomic Energy Agency, Wien. Schettler, G., (1984) Der Mensch ist so jung wie seine Gefasse, Piper-Verlag Miinchen. Schlierf, G., (1986) Gegenwiirtiger Stand der Ernahrungstherapie bei degenerativen Herzund Gefabkrankheiten, Therapiewoche 36, 1349-1352, Schiittauf, W., and Pischel, U., (1978) Die Margarine in Deutschland in der Welt, Presseabteilung der Union Deutsche Lebensmittelwerke, Hamburg. Schiittauf, A.W.,( 1942) Probleme der Wel@ettversorgung, Internationale Agrarmndschau, Heft 3, Berlin Schwandt, P., (1987) Therapeutische Effekte diatetischer Mabnahmen bei Patienten mit Hyperproteinamien, Akt. Emahr. 12, 7-10. Sebrell, W.H. Jr., and Harris, R.S.., (1954) The Vitamins: Chemistry, Physiology, Pathology, vol. I, p. 1, vol. 11, p. 131, vol. 111, p. 481, Academic Press, New York. Seher, A,, (1987) Der Cholesterin-Gehalt von Pflanzenolen, Fat Sci. Technol. 89, 27-30. Seidel, H., (1983) Fettchemie hat Zukunft ... (Interview mit Geschaftsleitungsmitgliedern der Schering AG), Chem. Ind. 251. Shell, private information from The Hague Headquarters, the Netherlands (1990). Singer, P., Die Rolle der Eicosapentaensaure im Rahmen polyenreicher Diaten, Sonderdruck der Emihungs-Umschau. Stadelman, W.J., (1993) Eggs, Dietary Importance, in Encyclopaedia of Food Science, Food Technology and Nutrition, p. 1534, Academic Press, London. Stamler, J., and Epstein, F.H., (1966) Coronary Heart Disease-Risk Factors as Guide to Preventive Action, Prevent. Med. 27, 1. Stover, H.-M., Munch, E.-W., and Sitzmann, W., (1988) Gewinnung von Mineralolsubstituten aus Olsaaten, Fen, Wissenschaf, Technologie 90, 547-550. Strycker, W.A., (1941) Absorption of Liquid Petrulatum from the Intestine: A Histologic and Chemical Study, Arch. Pathol. 31, 670.
52
Fats and Oils Handbook
TaufeVTerneflunger/Zobel, Cholesterin in Lebensmittellexikon, Behr's Verlag, 1993. Thiele, O.W., (1982) Bedarf des Menschen an essentiellen Fettsiiuren, ZFA Zeitschrifi fiir Allgemeinmedizin 58, 1329-1331. Thomasson, H.J., (1953) Biological Standardization of Essential Fatty Acids, Int. Z . Vitaminforsch. 62, 25. Toma, R.B., Curtis, D.J., and Sobotor, C., (1988) Sucrose Polyester: Its Metabolic Role and Possible Future Applications, Food Technol. 93. Tucker, B.W., and Pigott, G.M., (1993) Fish Oils, Composition and Properties, in Encyclopaedia of Food Science, Food Technology and Nutrition, p. 1896, Academic Press, London. Umweltbundesamt, Okologische Bilanz von Raps61 bzw Rapsolmethylester als Ersatz von Dieselkraftstoff (Okobilanz Rapsol), Berlin, January 1993. UNION, 50 Juhre UNION, Werkszeitschrift der UNION Deutsche Lebensmittelwerke, Hamburg, (1979). Vles, Gottenbos, J.J, Nutritional Characteristics and Food Uses of Vegetable Oils, in Oil Crops of the World, (Robbelen, G., Downey, R.K., and Ashri, A., eds.), McGraw Hill, New York. Vogt, L., (1987) Entwicklung und Anwendung eines Fettersatzstoffes, Lebensmitteltechnik, 642. Volpenheim, R.A., Synthesis of Higher Polyol Fatty Acid Polyesters Using High Soap: Polyol Ratios, U.S. Patent 4.518.772 (1985). Wagner, J., (1988) Is There Finally a Perfect Fat Replacer? Food Engineering International 9. Wang, Y.M., (1982) in Molecular Interrelations of Nutrition and Cancer, (Wang, Y.M., Amott, M.S., van Eys, J., eds.), pp. 369-379, Raven Verlag, New York. Welch, V.A., (1993) Fats, Digestion, Absorption and Transport, in Encyclopaedia of Food Science, Food Technology and Nutrition, p. 1731, Academic Press, London. Wirths, W., (1981) Kleine Ndhwerftabelle,Umschau-Verlag, Frankfurt. Wolfram, G., (1987) Metabolische Wirkungen linolsaurereicher Kost, Aktuelle Emdhrungsmedizin 12, 11-19. Wooley, C.C., (1929) Vor 5000 Juhren, Verlag H. Franckh, Stuttgart. Xue, S.P.,(1980) Proceedings of Symposion on Recent Advances on Fem'liry Regulation, p. 122,2-5 Sept., Peking. Yagi, K., Okhawa, H., Ohishi, N., Yamashita, M., and Nakashima, T., (1981) Lesion of Aortic Intima Caused by Intravenous Administration of Linoleic Acid Hydroperoxide, J. Appl. Biochem. 3, 58. Yamori, Y., Nara, Y., Iritani, N., Workman, R., and Inagami, T., (1985) Comparison of Serum Phospholipid Fatty Acids Among Fishing and Farming Japanese Populations and American Islanders, J. Nutr. Sci. Vitaminol. 31, 417-422. Zabik, M.E., citation in J. Am. Oil Chem. Soc. INFORM. I 9 0 (1990), citation from Am. J. Clin. Nutr. 46 (1987) und J. Food Sci. 54 (1989).
Chapter 2
Composition, Structure, Physical Data, and Chemical Reactions of Fats and Oils, Their Derivatives, and Their Associates To understand the reactions of fats and oils and the technologies applied, as well as to be able to influence their characteristics and behavior during processing, it is important to know their properties and reactions. The number of main building blocks that make up common oils and fats is relatively small. Most of the different characteristics occur as a result of minor components and the immense number of possible combinations of these building blocks. Under natural conditions, the number of major reactions of oils and fats that lead to alteration is small.
*: H H
-
-
for instance R = - C (CH& CH3
I;
OR,
Scheme 2.1.
Fats are esters of fatty acids with the trihydric alcohol glycerol. Because of the symmetrical structure of the glycerol molecule, two identical outer positions (1-, 3-) and one central position (2-) exist, to which the fatty acids are esterified. The type of fatty acid, as well as the distribution across these positions, determines the characteristics of the triglyceride. Not only the composition by summation equation but also the structure of the triglyceride is therefore of great importance. The share of different fatty acids in the world production of common edible fats and oils is of interest (Table 2.1). The calculation of Boekenoogen (1941) is now more than fifty years old. Today’s distribution is different, mainly as a result of a shift of the main production areas from the tropical regions of the world to those with moderate climates and also because of new crop cultivation. The table shows the distribution of 1941, and 1950 onwards, each calculated for average fatty acid composition per species. The fatty acid composition of the main seed and pulp oils does not differ substantially among the main types. Therefore, shifts of only a few percentage points in the table may be caused by immense shifts in cultivation. So little a share of erucic acid remains, for example, that it disappears by rounding off. In new rape varieties, it is almost completely substituted by oleic acid. Furthermore, the trend toward oilseeds with a high content of essential linoleic acid is clear; coconut oil has drastically
decreased relative to the other oils, resulting in a parallel decrease in the appearance of lauric acid. The fatty acid compositions of the individual oils and fats are described 53
Fats and Oils Handbook
54
TABLE 2.1 Fatty Acid Distribution of the Common Vegetable Fats and 0ilsa.b Share (%) ~
Fatty acid C,,:, C,,:, C,,:,
C12:, C,:, C14:o C,: C,:,
Oleic Linoleic Palmitic Lauric Linolenic Myristic Erucic Stearic All others
~~
1941
1950
1960
1970
1980
1990
34 29 11 7 6 3 3 3 4
30 24 14 8 6 3 8 3 4
29 32 14 7 5 2 5 3 3
30 36 13 4 6 2 2 3 4
31 38 14 4 5 2 0 4 2
31 37 16 3 5 1 0 4 3
agecause fatty acid composition of vegetable oil is not uniform within the same kind of oil, these rounded figures are only indicative; however, they are based on thoroughly calculated figures from averages. bource: Boekenoogen (1 941) and own calculations.
in Chapter 4. Here, only the principles of composition and structure will be discussed. One unsaturated fatty acid is ubiquitous in fats and oils; two are almost ubiquitous. Oleic acid is present in all known fats and oils and also predominates in quantity (Table 2.1). Almost all fats and oils contain its next lower homologues, palmitoleic acid (although in very small quantities) and the double unsaturated acid with the same chain length as oleic acid, namely, linoleic acid, as well as other CIgZ2 acids. None of the saturated fatty acids is omnipresent. However, palmitic acid has almost the same distribution as oleic acid. The distribution of myristic acid and stearic acid is similar to that of linoleic and palmitoleic acid. To date, the fat and oil of -5000 species (animals and plants) have been analyzed. No correlation between their composition and occurrence has yet been found. As early as 1935, Hilditch proposed a link between the fatty acid composition of fats and the evolutionary stage of the species in which they occur-beginning with microorganisms and marine monocellular organisms via marine plants and animals, to both terrestrial animals and plants. No real evidence could be found for this approach, although some indications for this connection may exist (Fig. 2.1). It seems evident that the amount of saturated fatty acids and unsaturated C,8fatty acids (mainly oleic acid) increased during the course of evolution. Unsaturated long-chain fatty acids tended to disappear and palmitoleic acid (due to its occurrence also named zoomaric acid) diminished dramatically. Similar trends are also expected in vegetable fats, but an insufficient number of lower plants have yet been analyzed to prove this. However, some hints can be found in the change of fatty acid composition that occurs during the ripening of seeds following patterns similar to evolution (see also Chapter 4). In total, the spectrum of fatty acids that occur in main edible oils and fats is represented by no more than 10-12 compounds, representing >98 % of all fatty acids in food. Statistically, however, 10 different fatty acids allow the formation of
Composition, Structure, Physical Data, and Chemistry
55
Fig. 2.1. Proportion of certain fatty acids on the fat of sea and land animals (after Hilditch and Williams 1964).
more than 650 different triglycerides. Nature does not follow statistical distribution; therefore not all possible combinations can be found. The model of restricted statistical distribution best simulates reality (see Chapter 2.2). Only a part of the different physical and chemical characteristics of fats and oils is caused by the special characteristics of the fatty acids themselves, or by those fatty acids that represent the residual 2%. One of the main parameters influencing the characteristics of fats and oils is the degree of unsaturation of their fatty acids; this can be changed by hardening (see Chapter 6.5). The other concerns the distribution of the 10-12 main fatty acids over the three different positions of the glycerol molecule. Therefore, great efforts are undertaken to separate certain triglycerides (see Chapter 6.2) or to change their distribution in the glycerol molecule (see Chapter 6.4). Fats have a density d,, of 0.91-0.95 cmVg, a very low vapor pressure and consequently, a very high boiling point. The melting point of oils usually lies below O"C, the melting point of the highest melting fraction of fats at about 75°C. Solubility is very good in nonpolar solvents and chlorinated hydrocarbons. The main chemical reactions that occur naturally are saponification and oxidation. Fats usually are accompanied by lipids such as carotene, sterols and phosphatides. Many oilseeds contain other specific components, which usually have to be removed during processing.
2.1 Components of Fats and Oils 2.1.1 Glycerol Glycerol (propane-l,2,3-triol) is the one and only alcohol to which fatty acids are esterified into triglycerides, i.e., oils and fats. Living organisms synthesize glycerol
Fats and Oils Handbook
56
from hexose; in the body, this reaction is much faster than the synthesis of fatty acids. That is why glycerol is always available in sufficient quantities (Propjak 1953) for the synthesis of fats. The Swedish pharmacist and chemist, Scheele, discovered glycerol in 1783 when he experimented with olive oil. Chevreuil, the father of fat chemistry, gave the sweettasting substance its name, which is derived from the Greek word for sweet.
H
rrzi I
I
I
H or
n n n
H
Scheme 2.2.
Glycerol is a symmetrical triple alcohol (for physical data, see Table 2.2) and is important as the basic component of all triglycerides. However, as the one and only identical alcohol component that is present in all triglycerides, it becomes unimportant for the technology of fats and oils. The only importance is in its reesterification with fatty acids to yield very special dietetic fats (see Chapter 8.7). The situation is totally different in the technical fats market. At present, the world consumption of glycerol is -500,000 MT/y. Most of it is for the chemical and pharmaceutical industry; a smaller part is used for food, tobacco and plastics manufacturing. Since 1948, glycerol has not been exclusively produced from oils and fats; it is also synthesized, for example, from propylene (Sherwood 1960). In difficult times, e.g., during the war in Germany, it can also be produced via fermentation of saccharose or hydrogenation of saccharose and starch with nickel catTABLE 2.2 Physical Data of Glycerol (Propanetrio1)a ~~
Molecular weight Melting point Boiling point Density Refractive index Viscosity relative kinematic Solubility in water in alcohol in benzene Dissociation constant
M= m.p. = b.p. 760 = b.p.1, = D420= n ,,20 =
~
~
92.1 1 2ooC ( 6 8 O F ) 29ooC (554OF) 8 2 . K (360°F) 1.261 1 g/cm 1.4746 1759.6 (cP) 1398.1 (cP) infinitely infinitely infinitely 7.10-15
pK = aSource: Handbodc dCkmistry and Physics (1 976).
14.15
Composition, Structure, Physical Data, and Chemistry
57
alysts. The present use of glycerol in Europe is shown by Steinberner and Preuss (1987), who also further explain glycerol production. 2.1.2 Fatty Acids
Today, >200 fatty acids are known to occur in fats and oils. Only a handful have a share >3% in the triglycerides of edible oils and fats. A further handful fall in the region of 0.5-3.0%. All others exist only as traces in common oils and fats; they can be found in higher amounts in special species. The most important saturated fatty acids were discovered in the first half of the 19th century. The initial discoveries occurred around 1820 with the basic work of Chevreuil who found butyric, capronic, and capric acid as well as palmitic and stearic acid. The others were discovered by Lerch and Fehling (caprylic acid 1844-45) and Marsson (lauric acid 1842 in the fat of laurel, Luuris nobilis). Arachidonic acid was found by Gossmann (1854) in peanut oil, behenic acid by Voelcker (1848) in behenic oil. Hell and Hermans identified lignoceric acid (1880) in beech tree tar. Five years earlier, oleic acid had been identified as the most important component of fats and oils. A survey of the history of discovery and identification of the fatty acids is given by Hilditch and Williams (1964). Ucciani (1995) gives the fatty acid composition of more than 2000 plants. Naturally occurring fatty acids are usually monobasic and unbranched. They are aliphatic monocarbonic acids, mainly saturated or mono- or bi-unsaturated. Higher degrees of unsaturation occur in marine oils. In animal and vegetable triglycerides, even-numbered chain lengths between 4 and 26 carbon atoms dominate; in waxes, chain lengths up to 38 exist. In fats of microorganisms, odd-numbered chain lengths can constitute up to 15% of all fatty acids. In the beginning of fat chemistry, high amounts of C,, fatty acid (margaric acid) had been found. This later proved to be a mixture of C16 and C18 that could not be separated with the analytical methods of that time. In the following sections, fatty acids are described with emphasis on the main members of each family. Selected others are shown in a table. Detailed information on fatty acids, their sources and their properties is given by Hilditch and Williams (1964), Geigy (1968), Baltes (1975), Swern (1982), and Gunstone et al. (1986). Original citation of literature from which physical data are taken can also be found. The main fatty acids also have trivial names that allow for clear classification in the case of saturated fatty acids. For unsaturated fatty acids, cis- or truns-configuration can be deduced mainly from the trivial name. In polyunsaturated fatty acids, the trivial name gives chain length and the number of double bonds; their position and configuration is marked separately. 2.1.2.1 Structure and Nomenclature. Fatty acids are monocarbonic acids that are usually derived from aliphatic hydrocarbons and can be brought into a systematic pattern (Fig. 2.2). All dominant fatty acids of edible oils and fats belong to the
Fats and Oils Handbook
58
families of alkane- and alkene-fatty acids. Their structure and nomenclature follow the common rules of chemistry. However, the main fatty acids also carry trivial names, which are commonly used. The carbon chain is, as usual, numbered from the carbonyl-end to mark functional groups. In addition there is a consensus in fat chemistry to number double bonds beginning from the methyl-group at the tail. Following that, a prefix “n” or ‘‘a” is used with the number of the carbon atom. Four different C1, fany acids are shown in Figure 2.3 with their trivial names, chemical names, structure and sum equation. The structure of fatty acids has a great influence on their physical data. With the main fatty acids from edible oils and fats, structural differences can occur only in the position of the double bond or its configuration (cis- or trans-). The influence of these parameters on the physical properties is shown in Figure 2.4 for the C,, acids, with one double bond in different positions and for both geometric isomers. Tables 2.3 through 2 7 give the physical data and typical sources. 2.7.2.2 Saturated Unbranched Fatty Acids. The lowest homologue, acetic acid (C,) cannot be found in triglycerides. The lowest in the sequence of “real” fatty acids is butyric acid C,, first found in butter as its name indicates.The acids up to C, are liquid and are found mainly in milk fat. Capric, myristic, and lauric acid are typical for coconut oil and palm kernel oil (“lauric fats”), and palmitic and stearic acids are the most common saturated fatty acids. Table 2.3 gives physical data. 2.1.2.3 Unsaturated Unbranched Fatty Acids. These fatty acids are very special because some of them are essential for mammals, i.e., also for man. This means that the body cannot synthesize them and is dependent on an external supply (see Chapter 1.4).
Unk.noh.d 2.1.2.2 2.1.2.4
-
B R W
SubrtyII(.d
2.1.2.4
2.1.2.4
2.1.2.3.1
2.1.2.3.2
Fig. 2.2. Systematic of fatty acids.
m 2.1.2.4
Composition, Structure, Physical Data, and Chemistry
59
/OOH unbranched, di-unwtualCtnnr-9,12octsdhic add (linolelsdbnic add)CitHnOc or H~C-(CH~)~CH~CH-CHZ-CH~CH-(CHZ)~-COOH
Fig. 2.3. C,, fatty acids of different degree of saturation.
70 60
c . .
2G.././..
50
E
tranr-
E40
2
configuration
30
P 20
cisI
10
0 '
2
3 4 5 I 6 7 8 9 1 0 1 1 1 2 Position of the double bond in the C18:l fatty acid
Fig. 2.4. Melting points of CI8:, fatty acid isomers (after Kaufmann 1958 and Markley 1947).
01
0
TABLE 2.3 Physical and Chemical Data of Common Saturated Fatty Acids CnH2n02 n
Trivial name
Chemical name
Molecular weight
4 6 8 10 12 14 16 18 20 22 24 26
Butyric Caproic Caprylic Capric Lauric Myristic Palmitic Stearic Arachidic Behenic Lignoceric Cerotic, Phthioic
n-Butanoic mHexanoic n-Octanoic n-Decanoic n-Dodecanoic n-Tetradecanoic n-Hexadecanoic n-Octadecanoic n-Eicosanoic n-Docosanoic n-Tetracosanoic n-Hexacosanoic
88.1 1 116.16 144.22 172.27 200.32 228.38 256.43 284.49 312.54 340.59 368.65 396.71
Melting point (T) -7.9 -4 16.7 31.3 43.5 54.4 62.9 69.6 75.4 79.9 84.2 87.9
Boiling pointlpressure (“Umm Hg)
Density Refractive index (g/mL at T) n,Yt (unitsPC)
163.51760 205.81760 239.7l760 269/760 2251100 250.5/100 268.511 00 2981100 3281100 306160
0.9387120 0.9290120 0.9088/20 0.8858140 0.8830120 0.8584160 0.8487l70 0.9408120 0.82401100 0.82211100 0.82071100 0.81981100
-
64110 99110 124110 152110 130.511 149.21 167.51 183.611 205.011 257110 272110
-
-
1.39906/20 1.41 635120 1.4285140 1.42855120 1.41 83/82 1.4308/60 1.4276180 1.4297180 1.4250/100 1.42701100 1.42871100 1.43011100
Acid number 637 483 389 325 280 245 218 197 179 164 152 141
2 G: rLJ
a-
0 i z $
[ 3
Composition, Structure, Physical Data, and Chemistry
61
2.1.2.3.7 Monounsaturated fatty acids. The shortest chain unsaturated fatty acid that has been found to date in natural fats is caproleic acid (Clo:l),traces of which have been identified in milk fat. The only monounsaturated fatty acid that occurs in substantial amounts is cis-9-octadecenoic acid, which has the trivial name of oleic acid (for sources and derivatives, see Hilditch and Williams 1964). All other acids occur on average at much lower percentages. This does not mean, however, that their contribution to the fatty acid spectrum of specific sources must be low. Cruciferae, for instance, contain high amounts of cis-13docosenoic acid, i.e., erucic acid (older varieties of rape contained up to 70%). Generally monoenoic acids are found as follows: Cl0:, to C18:1,in milk fats; CI6:, in seed oils. to CZ4:*, in marine oils; and up to Only in special plants have other isomers been found, e.g., cis-6-octadecenoic acid makes up between 4 and 97% (e.g., dill, caraway, persil) of total octadecenoic acid isomers in apiaceae varieties, cis-11-octadecenoic acid up to -20% (mallow) in malvaceae (Seher 1982). Table 2.4 presents the data for monounsaturated acids.
2.1.2.3.2 Polyunsaturated fatty acids. In addition to the cis- or trans-isomers of monoenic acids, polyenic acids offer further potential for isomerization, such as cis- and trans- in one molecule, and for isolated or conjugated double bonds. Polyunsaturated fatty acids (see Table 2.5) with isolated double bonds appear in all edible fats and oils. In native vegetable triglycerides, only all-cis isomers are found, but they are also present in animal fats. However, because the body cannot synthesize them, they are obtained from vegetable food. Highly unsaturated fatty acids occur in organ fats and marine oils. Conjugated polyunsaturated fatty acids are found almost exclusively in nonedible oils and fats. Alkyne fatty 'acids are extremely rare. The most important polyunsaturated fatty acids are linoleic and linolenic, both in amount and in their essential role in the human (animal) diet; arachidonic acid also has this essential role, although it occurs in much smaller amounts. Clupadonic acid is included in the table for its occurrence in fish oils (Table 2.5). 2.7.2.4 Other Fatty Acids. In addition to the unsaturated fatty acids mentioned above, there are alkyne fatty acids, branched fatty acids, alicyclic fatty acids and substituted fatty acids. These subgroups have no importance at all for edible fats. Some are included in the table as examples. Alkyne fatty acids are especially rare. For example isanic fatty acid (17octodecene-9,ll-diyonic acid) is mentioned, found in boleko oil (Baltes 1975) and tariric acid (6-octadecynoic acid), which occurs in piramnia species. Branched fatty acids are found at trace levels in many fats, predominantly animal fats. Substituted fatty acids are rare but equally important. Hydroxy fatty acids account for 53% of the cerebrosides (Chibnall et al. 1953, Mislow and Bleicher 1954) and are very important for brain function.
TABLE 2.4 Physical and Chemical Data of Common Monounsaturated Fatty Acids C"HZ",O2
n
Trivial name
12 Linderic (Laudeic) 14 Myristoleic 16 Zoomaric 18 18 18 18
Oleic Elaidic Petroselink Vaccenic 20 Cadoleic 20 Gondoic 22 Erucic
Molecular weight
Melting point
CH,
5-Dodecenoic
n-9
9
198.31
1.C1.3
17C173113
9-letradecenoic 9-Hexadecenoic (Palmitoleic) 9c-oaadecenoic 9fOaadecenoic 6c-Octadecenoic Ilt-Octadecenoic 9-Eicosenoic 11-Eicosenoic 13-Docosenoic
n-5 n-7
5 7
226.36 254.42
4.5 0.5
183-1 86/14 2 1a22011 5
From
o
("0
(g/mL at "c)
Refractive index n & t (unitsPC)
-
0.913W15
1.4535115
128
283
144m.6 1 8 ~8311 1
0.9130115 0.9003115
1.4549115
112
248
1.4587/20
100
221
1.4582/20 1.4499145 1.4535/47 1.4439160 1.446W50 1.4597/20 1.4W64
90
199 199 199 199 181 181 166
Boiling point pressure/ ("Umm Hg)
Chemical name
Density
Iodine Acid value number
2' i: (L,
i% z
(L,
3
n-9 9 n-9 9 11-12 12 7 n-7 n-11 11 n-9 9 n-9 9
282.47 282.47 282.47 282.47 310.52 310.52 338.58
13 51 32-33 44 24.5 25 33.5
203-20515 28fY100 234115 lW1851O.5 20~210110. 14ai52m.15 172-1 73/3 17W0.1 32W60(d) 203-20511 281130 252-254112
0.895/15 0.85/20 0.8824135
0.8882f25 0.82W100 0.8W55
90
90 90 82 82 75
g
TABLE 2.5 Physical and Chemical Data of Common Monounsaturated Fatty Acids C"H2"-2O2 n
Trivialname x
12 Linoleic 18 a-Linolenic 18 ylinolenic 18 Elaeostearic 20 Arachidonic 20 Timnodonic 22 Clupadonic 22 Cervonic
Miscellaneous n Trivial name 18 Ricinoleic 24 Nisinic 24 Nervonic 24 Cerebronic 24 2-Hydroxynervonic
Chemicalname
4
9,12-Octadecadienoic (LA) 6 9,12,1-decatrienoic (ALA) 6 6,9,12-oaadecatrienoic (CIA) 6 9~,llt.l3t-Octadecatrienoic 5,8,11,1 &Eisosa8 tetraenoic (AA) 10 5,8,11,1417-Eisc+ sapentenoic (EPA) 10 4,8,12,15,19Docosapentenoic (DPA) 12 4,7,10,13,16,19-W cosahexaenoic (DHA)
Chemical name cisl2-Hydroxy9-octadecenoic 4,8,12,15,18,21Tetracosahexaenoic 15-Tetracosenoic 2-Hydroxytetracosanoic 2-Hydroxy15-tetracosenoic
From CH, o
Molecular weight
Melting point
0
n-6
6
280.44
-5.2
n-3
3
278.42
-11
n-6
6
278.42
n-5
5
n-6
Refractive Density index nDM (g/ml at "C) (uniWC)
Iodine value
Acid number
0.9020/20
1.4699/20
181
200
0.9046RO
1.478ORO
2 74
202
-
2 74
202
0.9028/50
1.51 12150
274
202
0.92 19/20
1.4824/20
304
184
1.4977R3
-
186
0.9290RO
1.5014RO
464
170
-
1.5017/20
-
172
Density (g/mLat "C)
Refractive index nDVt (uniWC)
Iodine value
Acid number
0.9403/27
1.4716RO
85
188
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- _
Boiling point I pressure (Wmm Hg) 229-230 I16 23C232 I 17
129 10.02 125 10.05
4
-
-
278.42
49
6
304.46
49.5
235 I 12 217-220 I17
n-3
3
302.45
-
-
170 /1.3 169-171 m.15
n-3
3
330.50
<-78
-
n-3
3
328.49
<<-75
-
Melting point
Molecular weight
n-9
9
298.47
5.5
245 I1 0
n-3
3
356.55
-
n-9
9
366.64
112.5 113.5 40.541 99.5100.5 65
_ _ _ 384.65 n-9
9
382.63
-
-
207-2 12 /2
-
Boiling point I pressure(WmmHg)
From CH, o
K)
-
-
.
Fats and Oils Handbook
64
TABLE 2.6 Occurrence of Minor Fatty Acids in Different Oils ( O h ) In marine oil: herring oila c16:206 0.4 c18:3@6 O.3 0.1 0.4 C2,:403 0.4 in vegetable oil: rapeseed oilb c14:lo9 tr c14:lw7 0.007 c15:1,10 0.02 C1.j:lolo 0.01 c17:O 0.05 C17:1, 0.06
C16:me7
0.3
C162o4 C20:40b
In animal fat: lardb C13:o 0.08 C15:o C23:0br] 0.008 C24:obr] cl5:l 0.01 C17:1 C200br4 0.O2 C22:0br4
0.02 0.004 0.22 0.02
c16:204
Oh
c16:304
0.4
c16:401
c18:303
0.9 0.2
c200
o.l
c2D:lo9
C22:503
0.4
C24:1
C14:loS
0.004
c14:206
tr
c16:1~7
C190
0.02
Cjcj:,oio
0.02 0.29 0.02
c14:303
C15:l&
C1,:o
0.29 0.02 0.06 0.03
C1,:o
0.03 0.02 0.004 0.03
C22:206
C25:0brl Cig:, C24:0br4
C26:&rl C21:1 C260br4
0.4 o.2 Phytanic 0.2
o.6 0.3 0.4
c18:105
tr 0.07
c15:0
C16.06 C20.206
0.20
C2~306
C21:o
0.004 0.02 0.02 0.09
C23:o
c12:1 C22:3 C28:0br3
c202
C ,:,i
c]4:] C22:5 C28:0br4
0.02 0.13 0.20 0.02 0.03 0.02 o.20
aSource: Sigurgisladottir and Pilmadottir (1993). bSource: Sebedio (1 979). cSource: Iverson eta/. (1 965).
TABLE 2.7 Occurrence of Fatty Acidsa Saturated fatty acids CnH2nO2
n 4 6 8
Trivial name Butyric Caproic Caprylic
10 12
Capric Lauric
14
Myristic
16
Palmitic
18
Stear ic
20 22
Arachic Behenic
24
Lignoceric
26
Cerotic
Occurrence in common oils and fats Sources with remarkable moportion (% of total fattv acids) milk fat (3-5) milk fat (2-31, coconut oil (21 milk fat (a), babassu oil (3-51, coconut oil (4-61,palm kernel oil (13), cuphea painter; (65-75), hookeriana (-65) milk fat (3-4), babassu oil (4-7), coconut oil (6-9), cuphea species (88-92) coconut oil, palm kernel oil (45-SO), Litsea sebifera (-95), Cinnamonium inners (-95), cuphea tolucana (-65) coconut, palm kernel, babassu oil (15-1 7), herring oil ( 4 4 , nutmeg oil (177) Gymnacranthera contracta (-85), Scyphocephalum ochocoa (-80), cuphea palustris (-65) coconut oil, palm kernel oil, babassu oil, sesame oil (7-10), cottonseed oil (1 7-25), milk fat (33-38), lard (20-30), tallow (25-40), herring oil (7-1 3) menhaden oil (15-30) Myrica carolinensis (-€lo),Ochna sqarrosa (-73, Rhus succedanea (-70) lard (16-24), tallow (15-30) Canarium schweinfurthii (85), Garcinia species (60-65) peanut oil (5-7), milk fat (2-4) nephelium species (>30) peanut oil ( 5 4 , mustard seed oil (11,s) lophira species (20-35), Psochocarpus tetragonolobus (-20) peanut oil (13), mustard seed oil (Il), adenanthera pav. (-30), eleagnus angustifolia (-2O), tamarindus indica (-20) pentachletra macrophyllia (-5), rumex pseudonatronatus (-3), vermonia anthelmica (-3) Continued
65
Composition, Structure, Physical Data, and Chemistry
TABLE 2.7 (Continued) Monounsaturated fatly acids Occurrence in common oils and fats CnH2n02 n Trivial name Sources with remarkable proportion (YOof total fatty acids) 12 14
Lauroleic Myristoleic
16
Palmitoleic
18
Oleic
18 18 18 20 20
Elaidic Petroselin ic Vaccenic Cadoleic Eicosenoic
22
Erucic
sperm whale oil (4), thohaku nut oil milk fat, tissue fat, liver oil ( I l ) ,whale oil (2,5), sperm whale oil (14) pygnantus kombo (20-23) milk fat, tissue fat (<5), fish oil (go), whale oil ( I 1 51, sperm whale oil sinuata (-70), doxantha unguis (-65), plumeria alba ( ~ 2 7kermadecia ) (55-60) rapeseed oil (LEAR 55-65), peanut oil (45-65), sesame oil (35-50), corn oil (40-50), olive oil (55-85), goose fat (50-65) amaranthus trivolor (-go), garcinia multiflora (-88), corylus avellana (-85) body fat of ruminants Apium leptophyllum (-85), Deverra aphylla (-85), Umbelliferae (1 8-70) butter fat (<2.5), beef tallow sperm whale oil (519) jojoba oil ($30), mustard seed oil 6131, cod-liver oil ($14) Limanthes species (60-75) rapeseed oil (HEAR 40-65), mustard seed oil (I501 Crambe abbessynicum (-60), hispanica (-55)
Polyunsaturated fatly acids Occurrence in common oils and fats CnH2n02 n x Trivial name Sources with remarkable proportion (O/O of total fatty acids) 18
4 Linoleic
18
6 Linolenic
18 20 20 22
6 8 10 10
Elaeostearic Arachidonic Timnodonic Clupadonic
22
12 Cervonic
safflower oil (<80), sunflower oil (S75), poppy seed oil (<65) Myrianthus species (88-94), betula platyphylla (-88) herring oil (go),menhaden oil ($30), linseed oil (f47) Acacia lenticularis (-801, Euphorbia species (75-78); (-linolenic: barley 1-2) Aleuritis species (65-851, Parinarium excelsum (-60) cod-liver oil (125), herring oil (I30), menhaden oil ( 9 9 ) fish oils, fish liver oil cod-liver oil (celO), herringoil (-23), menhaden oil (<12), sardine oil (S14) fish oils
Special fatty acids n Trivial name
Occurrence in common oils and fats Sources with remarkable proportion (% of total fatty acids)
18 24 24 24 24
castor oil (I951 tunny oil brain cerebrosides (701, cardamine graeca (> 50), tropaeolum spp. (> 40) brain cerebrosides (15) brain cerebrosides (12)
Ricinolic Nisinic Nervonic Cerebronic 2-Hydroxynervonic
~~
aFor the fatiy acid composition of thousands of fats and oils of animal and vegetable origin, see among others Hilditch and Williams (1964) and Ucciani (1995).
66
Fats and Oils Handbook
Fatty acids that do not occur in edible fats and oils (with a few exceptions) are not dealt with in this chapter. Detailed information is given by Hilditch (1964) and Geigy (1%8), for instance.
2.2 The Structure of Triglycerides After it had been generally accepted at the beginning of the 20th century that oils and fats were composed of three identical fatty acids bound to one glycerol molecule, it was later found that in reality mixed glycerides predominate (if not, the fatty acid composition does not allow for their formation). Assuming as a model a fat that consists simply of two fatty acids A and B, only two main possibilities exist to distribute these acids to the glycerol molecule (G): (i) Assume that only single-acid triglycerides are formed, resulting in GA, and GB,; (ii) allow for all possible combinations, yielding GA,, GA2B, GAB, and GB,. In the second case, structural isomers of GAzB and GAB, have to be added, namely, (iii) GAAB, GABA and GBAA as well as GBBA, GBAB and GABB. Taking the possible distributions of these two fatty acids A and B on the glycerol molecule, three theoretical models occur that have been the basis of all research about interesterification. These models assume even distribution, minimal distribution, and statistical distribution of the fatty acids in the triglycerides. Assuming even distribution (Fig. 2.5) means that every triglyceride contains one of the two different fatty acids, as long as supply lasts. The model also says that only two different triglycerides exist at the same time but that all four structures given (ii) exist, across the whole range between 0 and 100% of each of the acids A and B. For example, with one third of all acid being A, the mixture would exclusively be 100% GAB,; with one half of all acids being A, it would consist of 50% each GAB, and Proportion of triglyceride type
[%I
0 33.3 66.7 Proportion of fatty acid B (fatty acid A-100-6)
100
[mol%]
Fig. 2.5. Triglyceride distribution of di-acid triglycerides assuming even distribution.
Composition, Structure, Physical Data, and Chemistry
67
GBA,, no other triglycerides being present. Following the model of minimal distribution, only the two single-acid triglycerides GA, and GB, would exist. Their share in the mixture would be equal to the share of the fatty acids A with respect to B (Fig. 2.6). If the triglycerides were synthesized in v i m , the minimal distribution would certainly be excluded for theoretical reasons. The carbon chains of fatty acids are not very voluminous and because they are very similar to each other (except for the chain length), no special distribution would clearly be preferred for steric reasons. Chemical synthesis would lead to almost statistical distribution. That indicates that the probability of occurrence of the four triglycerides GA3, GA2B, GAB,, GB, from (ii) with their isomers (iii) and their relative share of the mixture should be in proportion to the share of A and B in the mixture (Fig. 2.7). Further, it would predict that the acids should be equally distributed to the three positions 1-, 2- and 3of the glycerol molecule, although a differentiation between the 1- and 3-position would not be possible. These distributions, derived from purely theoretical considerations, do not occur in nature because the synthesis of fats does not follow statistical approaches; rather, it is carried out by enzymes whose highly specific catalysis of reactions is determined by blueprints anchored in the genetic information of the animal or plant. Apart from new varieties or new crop species, the genetically steered fatty acid distribution of natural fats and oils can be influenced only to a very limited extent (climate, feeding). One of the proofs for a nonstatistical blueprint is that a natural triglyceride has been found that consists of three saturated fatty acids even when the total of saturated fatty acids is <25%. A significant amount of work has been done to determine the pattern of triglyceride composition or at least some basic principles. Methods to calculate the fatty acid distribution in oils and fats have been given by Litchfield (1973). Mattson and Volpenheim (1961) and Proportion of triglycerlde type (961
60 -
0
33.3
66.7
100
Proportion of fatty acid B (fatty acid A=l00-B) [rnol%]
Fig. 2.6. Triglyceride distribution of di-acid triglycerides assuming minimal distribution.
Fats and Oils Handbook
68
0
25
50
75
Proportion of fatty acid 6 (fatty acid A=100-B)
100 [mol%]
Fig. 2.7. Triglyceride distribution of di-acid triglycerides assuming statistical distribution. Mattson (1963) confirmed the correctness of earlier work from a sample of 30 vegetable oils and fats, describing a predominant distribution of c16:O and C18:ofatty acids to the 1- or 3-position. Analyzing these results, it is evident that in vegetable oils and fats, saturated fatty acids are esterified to the 1- and 3-position as long as this position is available. After that, the residual fatty acids are statistically distributed over the free positions. As a result, the 2-position is occupied mainly by unsaturated fatty acids (Mattson 1963). Apart from its influence on the physical properties, the position of the fatty acids in the molecule also allows a distinction to be made between vegetable and animal fats. In animal fats, the synthesis of triglycerides does not follow the above pattern. Therefore the 2-position is not under proportionally occupied by saturated fatty acids. On the contrary, a slight preference for saturated fatty acids in that position can be found. As a result the ratio of c16:oin the 2-position to total c16:ois significantly different in vegetable and animal fats (Table 2.8). The significant difference between the ratio for vegetable fats and oils (50.3) and the one for animal fats (10.5) is also evidence for the thesis that statistical distribution of the fatty acids does not occur in nature, but that the distribution is genetically steered. From this evidence, Kartha (1962) developed a model that combines statistical and even distribution. This so-called restricted statistical distribution reflects reality much better (Fig. 2.8) than any other model. However, only a few fats come close to this model. The Kartha model corresponds very well to the analytical data for linseed oil or apricot kernel oil. For other oils, deviations from the model must be stated; however, in some cases, these are minor deviations only, and no other model are has been able to come as close to reality.
Composition, Structure, Physical Data, and Chemistry
69
TABLE 2.8 Ratio of Palmitic Acid in 2-Position to Total of Palmitic Acida Ratio (mol %) C16:O in 2-position C16:O total
Oil
0.07 0.08
Cottonseed Olive Peanut Rape Soybean Sunflower Palm
0.08 <0.10 0.1 7 0.1 7
0.25
Fat Cocoa butter Coconut Beef tallow Mutton tallow Lard
0.07 0.1 3 0.47 0.50 0.80
aSources: Mattson (1958, 1953 and 1964), Litchfield (1970 and 1971) and Gunstone and Padley (1965).
To estimate the physical properties of fats and oils, the triglyceride composition is important. According to the purpose of the characterization, the triglyceride composition can be globally indicated by the sum of the chain lengths of the fatty acids esterified to the glycerol or by the sum of double bonds of the whole triglycProportion of triglyceride type
100 80 60
n I
\
[%I
/
40 20 0 0
25
50
75
100
Proportion of fatty acid B (fatty acid A-100-8) (rnol%]
Fig. 2.8. Triglyceride distribution of di-acid triglycerides assuming restricted statistical distribution (after Kartha 1951).
70
Fats and Oils Handbook
Fig. 2.9. Triglyceride composition of vegetable oils (after Litchfield 1973).
eride (Figs. 2.9 and 2-10>.Also, detailed analyses with identification of the three fatty acids exist (for individual oils/fats see Chapters 3 and 4).
2.3 Physical Characteristics The physical characteristics substantially influence the properties of use of oils and fats; chemical properties are of comparably much lower importance because they
Fig. 2.10. Triglyceride composition of fats and oils (after Litchfield 1973).
71
Composition, Structure, Physical Data, and Chemistry
are more important for stability. For a complete understanding of oils and fats processing, knowledge of the physical properties is also important. Melting points and crystal modifications influence fractionation and margarine production; specific density and heat, viscosity and heat of crystallization are of interest for plant designs; structure of triglycerides is required for interesterification; knowledge of solubility is essential for oil extraction and wet fractionation; and vapor pressure and boiling points are needed for deodorization. Physical data are given in the following paragraphs (those that are of specific interest for a certain process only, see the relevant chapters). 2.3.1 Melting Point and Crystal Modification
For fats that require special characteristics (e.g., extra plasticity) and to be able to process them (in margarine making for example), a knowledge of crystal modifications is of importance. Triglycerides exist in three polymorphic modifications, called the a-,p- and P’-modifications. Using infrared (IR) spectral evidence, Chapman (1957b and 1960) classified the crystal structure as follows: a-hexagonal, p-triclinic, and p’-orthorhombic. As with all other polymorphic substances, fats change conformation at specific temperatures. Thus, they follow the path from the thermodynamically least stable to the most stable structure. There is also an amorphous, glasseous form that originates from chilled melts. It is called y-modification. From there, the a-fonn is reached, passing into p’ and p. The transition between modifications is irreversible because their melting points are quite different; an example is shown for single-acidtriglycerides in Table 2.9. Other authors give slightly different values; however, these do not change the picture substantially. TABLE 2.9 Melting Points of the Different Crystal Modifications of Single-Acid Saturated Triglycerides GA3a Melting point of modification (T)
Fatty acid
A
c 8:O c1o:o c12:o c14:0
C160 Cl8:O C18:l CK:, c1&3
C20:O C22:l
a
B’
B
-1 5 15 33 45 55 -32 -45 -44.6 62 17
-2 1 18 35 46.5 56.5 65 -1 2 -1 3 69 25
8.3 31.5 46.5 58 63.5 73.1 4.9 -1 3 -2 4 78 30
aSources: Loskit (1928),Clarkson and Malkin (1934), Wheeler (1940L and Wan (1 991 ).
Fats and Oils Handbook
72
Similar effects can be observed with bi-acid symmetrical triglycerides (characterized as GA,B) showing fairly large differences in their melting points (Table 2.10). The tables show that not only do melting point differences decrease absolutely in the sequence y + p’ 3 p, but also relative to each other as chain length increases. The respective modification influences the crystallization behavior, e.g., speed of nucleation and crystal growth (seeChapters 6.2 and 8). Riiner (1970) shows the transition between modifications in the cooling curves of a hardened oil and a fat (Fig. 2.1 1). The points of the first (TI) and second (T,) deviation of the lines emphasize the building temperatures tl of a-crystals from the melt and the transition temperature from a - to p’-modification. The points, T,and T,, differ from oil to oil (Table 2.11). In mixed-acid triglycerides, the melting point depends not only on the fatty acid composition, but also on the position to which the fatty acids are esterified. For bi-acid triglycerides, a different picture results from the position of the acid A in GAB,, i.e., in the 1- (3-) or 2-position. This determines whether the triglyceride is symmetrically built or not (Table 2.12). Numbers in the diagonals of the two parts of the table stay the same, of course, because they represent single-acid triglycerides that are exactly the same. For distearates with different second fatly acids, this relationship is graphically shown in Figure 2.12. The difference between the melting points of bi-acid triglycerides may be as great as 17°C; however, the values are very different for different acid combinations (Table 2.13). A similar scatter range as that for saturated acid triglycerides is observed for those containing mono- and di-unsaturated acids. Table 2.14 shows the numbers for triglycerides composed of two equal saturated fatty acids ( S ) and TABLE 2.1 0 Melting Point of Di-Acid Symmetrical Triglycerides CBAB and GABA (A = Palimitic or Stearic Acid) in Relation to the Crystal Modification and the Chain Length of the Acids A and B Melting point (“C);fatty acid A in BAB (2-position)
Fatty acid B2 (1,3-)
A = palmitic acid (C16:o) trigyceride modification
A = stearic acid (Cley0) trigyceride modification
Y
a
p’
P
Y
a
p
c12 c14
6 19 38
50
40 45.5 60 65.5 68
5 21 33 49
Cl8
36 42.5 55 56.5 64
34 38
cl 6
27 35 49 45 56
40 43 53 65 65
44.5 61.5 55 68 72.5
53 58 59.3 64 65
57 60.5 63.8 68 72.5
ClO
c12 cl 4 cl 6 C18
59 55
P
Melting point (“C); fatty acid A in ABA (1,3-position)
B (2-) Cl 0
-
47
’
20 34 37
49
42 47 46 45 59
48 50 55 56.5 65
51.5 53.5 60 65.5
68
30 36 44.2 50
-
47 52 56.6 56 55
Composition, Structure, Physical Data, and Chemistry
Temperature ["C]
\+IT
["FI
Ranasaad \Coolingnil
0
5
73
Rate
10 15 20 25 30 35 40 45 50 55 60
1
t -At1
I '2
Time
Iminl
Fig. 2.11. Cooling curves of palm kernel and hardened rapeseed oil (after Riiner 1970).
one unsaturated fatty acid (U) in different positions. In addition to the heat of fusion when melted, there is heat of transition when the fat crystals transform from one to the other crystal modification. Charbonnet and Singleton (1947) give these values for single-acid triglycerides that may indicate an order of magnitude (Table 2.15). The transition time from one crystal modification to the other has been measured by Sat0 and Kuroda (1987) for tripalmitin, dependent on the temperature in an interval from 42 to 52'C. The melting points of the modifications were a = 45'C, P' = 56.5"C and P = 65.5"C. Figure 2.13 shows the transition as follows: from the molten state via all modifications to the P-modification (liquid 3 solid) from a-to p-crystals in solid state (solid + solid) from the molten state of a-crystals to P-crystals (liquid + solid) from p'-to P-crystals (solid a solid) They found that crystal formation for each modification is much faster than the transition of this crystal modification into the more stable one at that temperature. The transition time from a- to P'-modification is described by Riiner (1970) for native and hardened fats. The ordinate of the graph (Fig. 2.14) shows the lifetime of the a-modification. The bars parallel to the abscissa represent these lifetimes; their endpoints show the melting points of the a-form (left endpoint) and the v-form (right endpoint). Transition temperatures are marked on the line TT. The influence of the composition of triglyceride mixtures on their melting and solidification points are shown in Figure 2.15 for the model-system tripalmitidtri-
74
'
Fats and Oils Handbook
TABLE 2.1 1 Transition Points AT, (Melt -+ a-Modification) and AT2 (a + @Modification) and Transition Times At of Fats and Oils Oil/fat
AT1 YC)
AT2 ("C)
33.0 18.0 15.0 30 18 18 19
31.5 16.0 15.0 27.0 18
Beef tallow Cocoa butter Coconut oil Lard Palm kernel oil Palm oil Shea butter Fat (hardened to "C)
AT1
8 14 0 8 0 960 10
<8
15
ATl ("C)
AT2 ("C)
21.5 18.5 26.0 23.0 25.0 29 24
21.5 18.5 26.0 14.0 20.0 24.0 24
Coconut (34) Cottonseed (34) Palm kernel (37) Peanut (33) Peanut (37) Rape (37) Soybean (37)
At (min)
("F)
91.4 64.4 59.0 86 64 64 66
At (min)
AT1
AT2
88.7 60.8 59 80.6 64 ~ 4 6 59 AT2
(OF)
70.7 65.3 78.8 73.3 77.0 84 75
0 0 0 23 13 10 0
(OF)
(OF)
70.7 65.3 78.8 57.2 68.0 75.2 75
aSource:Riiner (1970).
TABLE 2.1 2 Melting Point of the &Modification of Saturated Di-Acid Triglycerides GAB2 in Relation to the Chain Length of the Acid A in 1- or 2-Positiona Fatty acid B i n BAB c4 c6
Melting point ("C); fatty acid A in BAB (2-Position) being c6
c4
m -1 4.G
[ -25
oa
-1.2a 18.7a 38.8 40.1 44.5a 53.1
a Oa
c16 Cl8
Fatty acid B in ABB c6 C8
ClO c12 c14 c16
C18
c10
a Oa
<
-5.0a 8.3 20 30.2 42.5 48.5a 51.8
4.P 15.0a 31.5 38.5 43.5 51.5 57
I
c
c12 c14
noa
c8
-1 1 .oa 43.5a 46.5a 54.8
I 1
1 [
c14
c12
1 I
-1 la 4.0a 21.0a 37.5 46.5 50 53.5 60.5
1 I
3.7a 11.0 25.P 34 48 57 60 63.8
c16
j
1
18 18.la 28.0a 40 45.5 60 65.5 68
c18
1 1
15 32 32 44.5 61.5 55 68 72.5
1
Melting point ("C); fatty acid A in ABB (1-Position) being c4
-1 1 .oa 14.02 36.0a 40.03 43 49
Talcdated by Werdorp.
ClO
c6
&I\
c12
~~~~~
27.0a 34.0a 39 21.2
29.0a 38.0a 48.P 32
34.5 35
46.5 43.5 46.5 45
!F giF , c14
~
c16
c18
i.6,
46.5 54 56
65.6 62.5
65.0 72.5
75
Composition, Structure, Physical Data, and Chemistry
Fig. 2.12. Influence of the fatty acid A on the melting point of the symmetrical triglycerides C,8-A-C18and the unsymmetrical 1 8-CI8-A (after Bailey 1950).
laurin. Theoretical (---) and measured (-) values are compared. In this mixture, the highest depression of the melting point is found at 28% trilaurin. Natural fats and oils, however, are such complex mixtures of different triglycerides that a multitude of effects superimpose upon each other so that individual effects can scarcely be seen. If the amount of crystallizing matter is graphically shown against crystallization time, an S-shaped curve is obtained. Berg and Brimberg (1983) explain this curve, two straight lines connected by an intermediate line, with the kinetics of the process. According to their investigations, crystallization begins with the formation of small crystals (phase I); later these crystals agglomerate (phase II). This is equivalent to flocculation in dispersions and can be described with the same mathematical equations. The crystal flocculates grow and then crystal growth starts again (phase III). TABLE 2.1 3 Difference in Melting Points (“C) of the Positional Isomers of Saturated Di-Acid Triglycerides GA2B Between Positions 1- or 2- of the Fatty Acid B Fatty acid A, in GA,B Fatty acid B
Cl 0 0
C12:O
c14:0
cl 6:O
C18:O
c6:0 G O
24.1 8.3
6.2 1.7 3 .O
6.0 4.5 0.0 3.5
16.0 23.5 6.0 0.5 3.0
9.1 4.2 6.0 1.8 1.8
Cl 0 0 C12:O c14:0
C160 c16:0
7.5 0.5 5.0 3.5
4.5 2.0 16.5
6.0 1 .o
3 .O 5.5
Fats and Oils Handbook
76
TABLE 2.14 Melting Points of the P-Modification of Di-Acid Triglycerides in Relation to the Position of the Unsaturated Acid Ua Unsaturated fatty acid U In USS (1-position) being In SUS (2-position) being Oleic Elaidic Linoleic Oleic Elaidic Linoleic
Saturated fatty acids S2 C8 C l0
-1 4 4 16 25 34.8 38.5
c12 c14
c16
C18
3 15 27 39.5 50.2 61 ,1
-12.5 -0.5 15.5 20.5 26.5 32.5
-1 3 6.2 16.6 26.5 37.5 44.3
-5.6 0.5 6.5 13.5 19 23.5
c12 c14
cl6
Cl8
41 25 35.5 40 40.3 59.6
-1 7.0 -2.0 11.0 21.3 28.5 41.5
In USU (1.3-position)
In SUU (1.2-position)
Fatty acid S C8 ClO
15.9 25.8 36.6 46.1 55 61
u0
4.2
NO
0
-1 1.5 -8.5 -3.5 5.5
5.6 12 19.6 23.9
34.0 35.4 38.7 43.0 44.5 50.1
-1 0.0 -1 0.0 -7.3 -3 .O -2.2 7.0
aCalculatedby Wesdorp.
Essential for the production of fat and fat products is their crystallization time, the time that determines the necessary residence time in a cooler (crystallizers, see Chapter 8.2). For the time span between reaching crystallization temperature and the beginning of crystallization, Blanc (1969) gives the following values: coconut oil lard shea butter
3 min 14 min 45 min
palm oil (hardened) palm oil
5 min 27 min
Crystal modification also influences the specific density. For example, Wan (1991) gives the following values for tristearin: d3,a = 1.014,d3&' = 1.017, and d3,P = 1.043. TABLE 2.1 5 Heat of Transition from a-to P-Modification of Saturated SingleAcid Triglyceridesa Trical/g
I&
kcal/rnol kJ/rnol at (OF) at ("C) aSource: Charbonnet (1947).
rnyristin c14:0
palrnitin Cl60
stearin Cl8.0
-12.6 -52.75 -9.1 1 -38.14 90.0 32.3
-1 3.3 -55.68 -1 0.74 -44.97 112.5 44.7
-13.7 -57.36 -12.21 -51.12 129.2 54.0
77
Composition, Structure, Physical Data, and Chemistry
42
43
44
45
(108°F)
46
47
48
Temperature
49
51
50
["C]
52 (1 26°F)
Fig. 2.13. Transition times from a- to P'-modification in tripalmitin (after Sat0 and Kuroda 1987).
2.3.1.7 Melting Points of Mono- and Diglycerides. Melting points o f monoand diglycerides (that are produced from fats, see Chapter 8.9) lie 10-20°C above those o f their source fats. They follow a uniform pattern. Table 2.16 gives some examples. It can clearly be seen that melting points rise following the line tri-,di-,
Lifetime of (y -modification [min] Peanut oil
m
Rape 39
A
25 Rape 37 Cocoa bMer
15
Shea butter'
Cottonseed 33 Sunflower 33 Soybean 37
Tallow
3 TT
-5
10
14
18
22
(50"F) End points of bars:
26
30
34
left: (y --->B '-modification
38
(1 00°F)
["c]
right: melt --->(y-modification
Fig. 2.14. Lifetime of the a-modification of triglycerides as well as transition temperatures (TT) from the melt to the a-modification (right) and from the a- to the P-modification (left) (after Riiner 1970).
Fats a n d Oils Handbook
78
(185.F)
Temperature ["C]
7 * ('(re
74
Trlpalmltln / Tristearin 70 -
Cloud point
(144'F)
t2P..
60 - x[%] = 0
20
40
60
80
100
0
20
40
Palm oteln x) /
Tristearin x) I Tripalmitin (100-x)
Palm kernel OW \lCIO-x)
Fig. 2.15. Melting points and solidification points of the system tristearinkripalmitin (after Joglekar et a/., 1928 and Watson, 1930); cloud point of the system palm olein/palm kernel oil (after Kun and lbrahim 1991).
monoglyceride. Furthermore, the influence of double bonds in the fatty acids can be seen (melting point drops). Mono- and diglycerides are used as emulsifiers. When storing blends of monoand diglycerides with oils (see Chapter 8.4), their significantly higher melting points must be noted in order to keep all components of the mixture liquid, thus avoiding crystallization, separation, and settling of the emulsifier (partial glycerides). TABLE 2.1 6 Melting Points of Single-Acid Mono-/Diglycerides; P-Modificationa Melting point ("C)
Fatty acid C" c6:0
C8:O
c1o:o c1z:o c14:0 cl 6:O
C18:O c18:1 cl 8:2 c18:3
C,-C,-C, -2 5 8.3 31.5 46.5 57 65.5 72.5 4.9 -13.1 -24.2
C,-OH-C,
44.5 57.5 65.5 73.2 78.2 25.8 -2.6 -12.3
C,-C,-OH
-27 40.8 55.5 62.8 71 .O
C,-OH-OH
OH-C,-OH
19.4
-8
40
29.8 40.4 51 61.2 69.0 75.2 23.5 8.9
53 63 70.5 77.0 81.5 35.2 12.3 15.7
aSources: Bailey (1950), Baur (1 949), Eckey (1954), Hartmann (19581, Martin (1953), Chapman (19571, Filer (1946), Daubert and Lutton (1939, 1944 and 1947), Wheeler (1940), Malkin (1936 and 1954) and Henkel and Cie (1971).
79
Composition, Structure, Physical Data, and Chemistry
2.3.2 Other Physical Data 2.3.2.1 Specific Heat. Several equations exist for the calculation of the specific heat. All of them are empirically determined and are valid only for certain fats and oils in a specific temperature range. However, all of them are accurate enough to be used for most common technical applications. These equations have the following form:
C, = a + b x t (caVg)
v.11
In view of the small differences in a, and the minor influence of the coefficient b (Table 2.17), it is clear that such very small differentiation is not necessary to answer the usual questions in fat processing. Usually, accuracy is satisfactory when using one general value calculated for all fats and oils over the whole temperature range. For higher temperatures Bernardini (1985) gives the following data (soybean oil): 100°C C, = 0.580 ( c d g ) = 2.428 (J/g) 150°C C, = 0.589 ( c d g ) = 2.466 (J/g) 200°C C, = 0.626 (CaVg) = 2.621 (J/g) 250°C C, = 0.698 ( c d g ) = 2.922 (J/g) Temperature dependency for other oils is shown in Figure 2.16. 2.3.2.2 Heat of Fusion and Melting Dilatation. More important than the specific heat is the heat of fusion (Table 2.18). It is equal to the heat of crystallization, but inverse in sign. Its estimation is especially important to calculate the heat transfer in crystallizers and scraped surface heat exchangers (see Chapter 8). The heat has to be removed quickly in order to give defined properties to the product. Bailey (1950) prcb posed the following equation to calculate the heat of fusion for single-acid triglycerides:
AH = 3[(n- 2)a + b]
v.21
For triglycerides with different fatty acids, the following then must be valid:
H = 3b + (nr+ nrr+ nlrl - 6)a
~.31
TABLE 2.1 7 Coefficients for Specific Heat Calculation (Equation [2.1]) Appl icabiIity Trielvcerides
Oils Tallow, palm oil, partially hardened oils Fats, iodine value < l o Source: Bakes (1975).
- t ("C) 15
-t
Coefficient (OF)
60
a
b
0.462 0.475 0.458
0.00060 0.00055 0.00070
ao
Fats and Oils Handbook
[J/sl
Specific heat [cal/g]
1
Soybean oil hardened (1.V.=6.&*'*Lintrd/
\
-2.28
Soybean oil
-2.08
1.88 0
80
(32°F
(1 760F)
160
240
(32WF)
(464OF)
Temperature
["C]
Fig. 2.16. Specific heat of oils and fats depending on temperature (after Clark 1946).
where n, is the number of CH2-groups of the fatty acid in position x, a is equal to AH per CH2-group and b is equal to AH of the end CH3-group. The values for a and b in triglycerides are as follows: for the a- and p-forms, a = 0.81 and 1.06, respectively, and p = -1.28 and 4.70, respectively. More detailed tables with the heat of fusion for different triglycerides in all modifications as well as fatty acids, mono- and diglycerides have been compiled Density [g/ml] 0.95
Corn 011, soybean oil, cottonseed oil
Stearic acid
0.80
.% '
a,;-.'
..L.'
-.. . *'.
+extrapolated
0 (32°F)
5q122)
I 0 0 (212) Temperature ("C]
150(302)
200 (392'F)
Fig. 2.17. Specific density of oils and fats (after Noureddini et al. 1995).
Composition, Structure, Physical Data, and Chemistry
81
Volume
I
Fig. 2.18. Dilatation of a "steep" and a "flat" fat.
<---- Temperature c----
by Bailey (1950). During crystallization, energy equivalent to the heat of fusion is set free as heat of crystallization. There is also the heat of transformation from one crystal modification to another. Fats expand during melting. The melting dilatation is -0.15 mL/g. This dilatation is observed not only during melting but also during transformation between crystal modifications (Table 2.19; see also Fig. 2.19). 2.3.2.3 Specific Density and Thermal Expansion. To speed up processes, for ease of automation and to allow continuous processing, gravimetric dosing is being replaced more and more by volumetric dosing. The quantity to be measured, i.e., weight, which is independent of temperature is thereby substituted by the temperaturedependent quantity, i.e., volume. Usually, it is not possible for the oil to flow through TABLE 2.1 8 Heat of Fusion of Saturated Single-Acid Triglyceridesa ~~
.,
Heat of fusion (cal/gl Fatty acid A in GA3 Trig1yceride Tricaprin Trilaurin Trimyristin Tripalmitin Tr istearin
Molecular weight
measured
calculated
C-
(MI
a
P
a
P
1O:O 12:O 14:O 16;O 18:O
554.8 639.0 723.1 807.3 891.5
-
38.9 46.2 50.3 53.1 54.6
27.88 31.77 34.82 37.11 39.02
42.09 46.49 49.88 52.55 54.73
aSource: Charbonnet and Singleton (1947).
34.6 37.4 38.9
Fats and Oils Handbook
82
TABLE 2.1 9 Melting Dilatation of Saturated Triglycerides Melting dilatation of (mV@
C-
Fattv acid A
12:o 14:O 16:O 18:O p 18:O a
Lauric Myristic Palmitic Stearic Stearic
GA2
A
0.144 0.152 0.162 0.1 67 0.1 92
0.1 43 0.1 81 0.186
Source: Henkel and Cie 1971.
the volume meter at always the same temperature without a large amount of expenditure. Modem microelectronics, however, allow the mechanically measured volume data to be processed electronically thus compensating for temperature effects by correction factors. For that pupose the microcomputer is given an oil- or blend-dependent reference table for the relationship between temperature and density. The knowledge of the specific density is, therefore, now more important than before, particularly because even large tables can now easily be stored and handled by modem process computers. Swem (1982) gives the following equation for density: d,, = 0.8475 + 0.0003* SV+ 0.00014 * N
~2.41
where SV is the saponification value and N is the iodine value. More important than the saponification value is the iodine value. Normally, saponification values for oils and fats are quite similar (190 c SV c 210) which Dilatation [mm3 /25g] ’ 005 * 2
Cocoa butter
llllp6 butter
*
Shea butter Beef tallow
Lard Palm oil (Congo)
50 (1 22°F)
45
40
35
30
25
Temperature [“C]
20
15 (SQF)
Fig. 2.19. Dilatation of some fats and oils (after Jurriens 1968).
TABLE 2.20 Specific Density of Common Oils and Fatsa I (at 1S0U59'F)
II (at 4OoU104"F)
Animal oils and fats Butterfat Lard Tallow Mutton tallow Goose fat Bone oil (cattle) Neat's foot oil
0.935-0.943 0.914-0.922 0.9364.952 0.936-0.960 -
0.890-0.893 0.91 3-0.91 8
Fish oils Herring oil Sardine oil !5perm oil Whale oil Cod liver oil Fish oil
0.91 7-0.930 0.92 74.932 0.875-0.890 0.914-0.931 0.921-0.927 -
Triglyceride
111 111 (at 8OoU176"F)
0.89W.904 0.89M.904 0.896-0.904 0.902-0.906 -
-
-
I (at 1SoU59"F)
Vegetableseedo;is Soybean oil Cottonseed oil Sunflower oil Rapeseed oil Linseed oil Mustard seed oil Coconut oil Palm kernel oil Babassu oil
Palm oil Olive oil Avocado oi I Nonedible oils Castor oil
0.900-0.922 Triglyceride
0.922-0.934 0.91 7-0.931 0.92M.927 0.9104.91 7 0.9304.935 0.912-0.921 0.919-0.937 0.925-0.935 0.925 0.921-0.947 0.914-0.919 -
0.95M.974 0.9364.945 111 111 (at 15OU59"F) ~
Tricaprin Trilaurin Trimyristin Tripalmitin Tristearin
8.913 8.801 8.722 8.663 8.632
-
Trioleic Trilinoleic Trilinolenic
aSources: (I) Festschrift Thod, (11) Codex Alimentarius and (111) Kalu and Hamilton (1992).
9.1 62 0.9303 0.9454
II at
(at 20°U680F)
(at 4OoU104"F)
0.919-0.925 0.91 80.926 0.91 7-0.923 0.91 4-0.91 7 0.91 40.922 0.908-0.921 0.899-0.914 0.91 80.922 0.895-0.903 0.91 0-0.91 6 0.91 0-0.91 6
Fats and Oils Handbook
84
results in an effect on the density on the order of tenths of a percent. For a medium saponification value of SV = 200, Equation [2.4] becomes d,, = 0.9075 + 0.00014. V
12.51
In contrast, a change in IV of 60 results in a change in density of 1% and, using volumetric metering, in a mass difference of 1%. This would be the case, for example, when changing from coconut or palm kernel oil to olive or peanut oil. A change to sunflower oil would even result in a deviation of 2%. Formo (1979) showed the density of cottonseed oil (IV = 110) over a greater temperature range (see also Fig. 2.17). According to his findings, the usual equations require the following corrections for oils rich in CI6and C18fatty acids: linseed oil (IV = 190), correction 4.013; soybean oil (IV = 130), correction +0.004;hardened lard and vegetable oil (IV)= 70, correction -0.006; fully hardened oil (IV = lo), correction 4.010. These corrections are valid only for the area of fully liquid oil (melted fats). Assuming the common saponification value for cottonseed oil (SV = 190-200) Formo's data and corrections correlate well with the equation given by Swern. Table 2.20 shows densities customary in the trade, compiled from two sources. A decrease in density is a consequence of thermal expansion. Hannewijk et al. (1964) classified oils and fats and gave the following equations for the expansion E for three classes: General fats and oils Hard fats, palm oil, butterfat Coconut and palm kernel oil Oils
E=K+sx~ E = 20.4 + 0.020~ E = 20.6 + 0.019t E = 19.8 + 0.015t
where E is the medium expansion (mmV25 g), t is the temperature ("C), K is a constant (dependent on oil and respectively fat) and s is the slope of the oil-specific straight line E against t. These equations have been worked out theoretically by applying statistical methods to the data found by Bailey and Singleton (1945) for single-acid triglycerides as model substances. For practical use, it has been proposed to combine Equations [2.7] and [2.8] to yield the following for fats:
E = 20.5 + 0.020t
[2.10]
The slight deviations caused are not significant in practical use. The expansion that follows the above equation can be combined with data for the density to calculate a percentage expansion that gives a much better impression of the order of magnitude of this effect. To obtain exact values, the density of the specific oil must be used. However, to obtain a reliable overview, it makes sense to calculate using a simplified set of data. The density of vegetable oils is -0.920 (2OoC),which leads to the following:
Composition, Structure, Physical Data, and Chemistry
1 g of vegetable oil = 1.087 cm3
85
[2.11]
Taking into account the theoretical expansion from Equation [2.9], the conclusion is as follows:
E = 19.8 + 0.015 x 20 = 20.1
20.1[mm3/(25 g . t)]= 0.000804 [cmV(g . t)]
[2.12]
From this follows the percentage expansion E% per "C for a temperature of 20°C:
E% = 0.000804 x 100/1.087= 0.074
[2.13]
Under these simplifying assumptions, one can say that vegetable oils expand 0.074% per "C at 20°C. Following the same approach, a value of 0.077% per "C is obtained for fats. Baltes (1975) gives 0.00070 (= 0.07%) for coconut oil, 0.00071 for palm kernel oil, and 0.00068 for all other oils as the coefficient of expansion. For small temperature intervals Ar, E can be multiplied by Ar to yield the overall expansion over that temperature interval. Equation [2.6] then becomes
Etota,= At(K + sr)
[2.14]
where EtOd is the expansion over the temperature interval At. Over large intervals, this calculation leads to an error of -lo%, assuming heating from 100 to 200°C. To avoid this error, one must integrate over the temperature interval (b = beginning, e = end).
By integration Equation [2.6] becomes [2.15] After integration,
Etotal = K(r, - fb)
+ s/2(t,2 - rb2)
[2.16]
and, after breaking up (t,2 - tb2),
Equation [2.17] expresses, in a deducted form, something which is logical in a linear relationship such as expansion vs. temperature, namely, that the corrected value over a temperature range tb and re iS equal to the value calculated with the mean value t, of tb and re. Written differently, Equations [2.14] and [2.17] can be
86
Fats and Oils Handbook
compared as follows:
Etotal= Ar(K + sr)
[2.14]
where tMis the arithmetic mean of temperatures tb and te. The above expansion is valid only for oils and totally melted fats. Such equations can also be defined for the temperature ranges in which triglycerides are completely solidified. The resulting straight line (for fats), however, is not a continuation of the line for the liquid state (oils). Both lines are separated by the area of melting dilatation, i.e., the area that is bordered by the melting of the very first parts of the fat and the melting of the very last bit. The two straight lines for liquid state and solid state do not have to be parallel (Fig. 2.18). While the dilatation curve of a more or less single-acid fat is steep those of plastic fats are flat, because of the overlap of melting dilatation of many different triglyceride components. Apart from using melting dilatation for analytical purposes, it also gives information about the characteristics of a fat: the steeper the curve, the narrower the melting range. With a narrow melting range, the heat of melting has to be delivered altogether almost at “one point” of temperature; thus, a cooling effect in the mouth results when the fat is consumed. A good example for steep fats are cocoa butter, illip6 butter, and coconut fat (Fig. 2.19). 2.3.2.4 Vapor Pressure and Heat of Evaporation. To provide the necessary
conditions for deodorization or physical refining of oils and fats, a knowledge of the vapor pressure of the components to be removed is necessary (e.g., fatty acids, aldehydes or ketones). The vapor pressures of fatty acids, single-acid triglycerides and of two oils, shown in Figs. 2.20 and 2.21, differ mainly in that the comparable vapor pressure of the fatty acids is roughly a hundred times higher. In a double logarithmic diagram, vapor pressure vs. temperature would yield a straight line. In addition to the main components of oils and fats, there is special interest in the minor components that negatively influence taste, smell, and keepability. These are usually ketones and aldehydes whose vapor pressure is significantly higher than that of triglycerides and fatty acids (Figs. 2.22 and 2.23). Chemical antioxidants have vapor pressures on the order of magnitude of ketones and aldehydes. In a logarithmic graph, their vapor pressure forms a straight line from almost 0 at 0°C to lo00 mm Hg at 249°C (butylated hydroxyanisole BHA), 262°C (butylated hydroxytoluene BHT), and 280°C (tert-butyl hydroquinone TBHQ). The vapor pressure of natural antioxidants is much lower, e.g., for tocoperols, it is -50 times lower. Eckey (1954) gives the heat of evaporation for single-acid triglycerides (Table 2.21). As a comparison, the heat of evaporation for water is 2.26 kg/g (539 caVg), i.e., approximately ten times as high compared with fats.
87
Composition, Structure, Physical Data, and Chemistry
Vapor pressure [Pa]
10
1
01
00 1 50
90
130
170
210
250
290
330
(122’F)
(194)
(266)
(338)
(410)
(482)
(554)
(626°F)
Temperature [“C]
Fig. 2.20. Vapor pressure of the fatty acids C6 to CI8 (after Monick eta/., 1946).
2.3.2.5 Viscosity. Viscosity of oils, as with most substances, is inversely proportional to temperature. It is also inversely proportional to the number of double bonds of the esterified fatty acids. However, the first double bond decreases viscosity much more than any subsequent one (Fig. 2.24). In logarithmic graphs, the relationship between temperature and viscosity is repre sented by a straight line. This relationship is shown by an equation that has been Trimyristin Tri palmiti n
Vapor pressure [Pa]
10 1
0.1 0.01
Pressures
0.001
are
0.0001 I 140 160 180 200 220 240 260 280 300 320 (284°F)
(446)
(356)
Temperature ~ C I
(536)
(BOBOF)
Fig. 2.21. Vapor pressure of triglycerides and edible oils (after Perry et a/., 1949 and Stage 1977).
aa
Fats and Oils Handbook
Vapor pressure [Pa]
D
A
C
e
0
80
40
(32°F)
120
200
160
240
(392)
(284)
(176)
280 (536'0
Temperature r C ]
Fig. 2.22. Vapor pressure of some components associated with edible fats and oils (after Stage 1979).
deduced empirically by Gouw et al. (1966); as a comparison, viscosity of water at 20.2'C, 68.4'F is 0.1 cP. log (1.2 + log E) = K 0.95 log (1
+ r/l35)
[2.19]
where K is a constant, t is the temperature ('C), and E is the dynamic viscosity (cP). Vapor pressure [Pa]
E
B F
0 B Nonadecenel C Oleatetracosane
E
.
.
' . '
. .'.
Lauricacld
G Palmitic acid
................. . . . . . . . . . . . . .
. . . . . . . . . . .
0 (W°F)
50
100 (212)
150
200
(347)
250
(-1
300
350 (882°F)
Temperature ['C]
Fig. 2.23.
Vapor pressure of some components associated with edible fats and oils (after Stage 1979).
89
Composition, Structure, Physical Data, and Chemistry
TABLE 2.21 Heat of Evaporation of Triglycerides at Their Boiling Point at 0.0014.050 hPad Heat of evaporation
Boiling point ("Cat)
Boiling point ("F at)
Triglyceride
(cal/g)
U/&)
0.05 hPa
0.001 hPa
0.05 hPa
0.001 hPa
Tricapron Tricaprylin Tricaprin Trilaurin Trirnyristin Tripalmitin Tristearin Sovbean oil
58.6 59.1 53.7 48.8 50.9 47.6 44.9 50.5
245.3 247.4 224.8 213.1 204.3 199.3 188.0 209.3
135 179 213 244 275 298 313 308
85 128 159 188 216 239 253
2 75 355 41 5 471 52 7 568 595 586
185 262 31 8 3 70 42 1 462 487
aSources: Perry eta/. (1949), Eckey (1954), Henkel and Cie (1971), and Kalu and Hamilton (1992).
The viscosities of the different seed oils depend on their triglyceride composition; oils with high trioleate content (for example, olive oil or LEAR rape oil) are significantly more viscous compared with oils such as soybean oil (Fig. 2.25 and Table 2.22). 2.3.2.6 Solubility of Oils and Fats and in Oils and Fats. Solubility of oils and fats in solvent plays a role for three processes described later, namely, oil extraction (see Chapter 5.2.3), extraction of oil from spent bleaching earth (see Chapter 7.3.6) and wet fractionation (see Chapter 6.2.2.3). For the separation sharpness of olein and stearin in dry fractionation, the solubility of fats in oils is of some importance. Oils and fats are practically insoluble in water (hydrophobic) and dissolve better in nonpolar than in polar solvents. This is not true for fatty acids, which are also highly soluble in polar solvents, a property that offers the opportunity to wash them out of fats and oils. Only acetic acid and butyric acid are miscible with water in any proportion. From lauric acid onward, fatty acids are insoluble in water. As can be expected, water solubility decreases with increasing (hydrophobic) chain length of the acid.
2.3.2.6.7 Solubility of oils and fats in solvents. The solubility in different solvents covers a broad spectrum. Of course, solubility also increases with temperature. It also decreases with the increasing chain length of the fatty acids. Solubility of lauric acid and myristic acid at 10'C in toluene is A00 and 100 times higher, respectively, than that of stearic acid, for example (Fig. 2.26 and Fig. 2.27). The same tendency noted in fatty acids is also found in triglycerides, Le., the higher the chain length, the lower the solubility (Figs. 2.28 and 2.29). The solubility of fats in oils where oil is the solvent is a very complex process. Therefore, concepts can be developed only from model systems that have ideal
Fats and Oils Handbook
90
Viscosity [cP]
12 Fatty acids
0
t
Z
I
t
!
c18:o
'
l
I
t
1
1
/
I
1
I
I
I
!
I
/
/
10 20 30 40 50 60 70 80 90 100110120 (50'F)
(149)
(104)
(1 94)
(248OF)
Temperature ["C] Viscosity [cP]
25
j Triglyceride : X
Tristearin Tripalmitin
40 45 50 55 60 65 70 75 80 (1M'F)
(131)
(1 58)
*
Trimyristin
A
Trilaurin Tricaprin
85 (1fi'F)
Temperature ["C]
Fig. 2.24. Viscosity of single acid saturated triglycerides (after Joglekar and Watson 1928 and 1930).
composition and allow simplified assumptions. The most substantial of these assumptions is that fat in oil forms an ideal solution, so that no mixed crystals are formed. For such solutions, melting points have to differ by at least 2 0 T , i.e., m.p.oleinc m.p.stearin - 20 = ideal solution. Hannewijk er al. (1964) has investigated the solubility of stearines in oleines (Fig. 2.30). For calculations Clausius Clapeyron's equation is applicable, assuming constant pressure in a monovariant system. The solubility of the high melting compound (stearin) can then be described as:
Composition, Structure, Physical Data, and Chemistry
viscosity
91
[CP]
120
100
Sunflower oil,
80
p.m.: Castor oil 950 (20%) 125 (50%)
------
60 40
20 .O
20 30 40 50 60 70 80 90 100110 (68°F)
(122)
(104)
(194)
(230°F)
Temperature ["C]
Fig. 2.25. Viscosity of oils and fats dependent on temperature. d In m -=-
Qs
dT
R.TM2
[2.20]
[2.20aI
where m is the molar share of stearin in the mixture (gmol,,ea,in/gmolmixtu,),Ts is the melting point of stearin ("C), TM is the melting point of the mixture ("C), R is the universal gas constant, and Qs is the molar heat of melting of high melting component, i.e. the stearin. Assuminn a constant
(3 heinp
0J2.3 . R. eouation 2 20a hacnmec
log m=-C.-
TS TS
'
[2.21]
TM
Assuming concentrated solutions of the high melting component S and a melting point TM that does not differ greatly from that of S,by approximation T, may be regarded equal to Tsin the denominator. Equation 2.21 then becomes log m = K(T- T,) in which
K=-=C Qs Ts2 2.3. R . Ts2
[2.22]
Fats and Oils Handbook
92
TABLE 2.22 Viscosity
of Fats and Some Fatty Acids at Different Temperatures
Viscosity (cP) at "C ( O F ) Oils 20°C (68°F) Rape oil (HEAR) Palm oil Cottonseed oil Peanut oil Sunflower oil Soybean oil Linseed oil Palm kernel oil Coconut oil Castor oil Olive kernel oil Triglycerides Tricaprin Trilaurin Trimyristin Tripalmitin Tristearin
Fatty acids Palmitic acid Stearic acid Oleic acid Erucic acid
90.9 50 82.6 77 63.7 60.7 47.7
-
950 77 60°C (140°F) 7.77 13.59 17.71
-
38°C (100°F)
50°C (112°F) 28 24 25.3 24 21.5 20.5 17.5 17.4-1 8 16.8-1 7.3 123 24
Reference
98.9"C (210°F) 10.3
-
8.4
7.7 7.6 7.3 6.5 6.1 20.1 9.1
-
7 5 T (167°F)
85°C (185°F)
-
7OoC (1 58°F)
14.6 17.6 20.5 23.4 48.9"C (120°F)
I,IV I I,IV 111 I,IV I,IV I,IV II,IV IIJV II,IV III,IV
-
-
VI,VII VI,VII VI,VII VI,VII VI,VII
6.25 9.1 1 11.70 14.67 18.50
5.51 7.22 9.20 1 1.44 14.31
75°C (167OF)
98.9"C (210°F)
-
-
7.10 9.04
17.70 32.30
13.20 22.40
-
V V V V
4.13 5.08 4.03 6.1 8
aSources: (I)Boekenoogen (1935), (11) Formo (1979), (111) Eckey (1954), (IV) Rescoria and Carnahan (1936), Noureddini era/. (1992), (VI) Kalu and Hamilton (1992), and Joglekar and Watson (1928).
M
For such concentrated solutions a linear relationship may be assumed not only between log m and Vr,but also between log m and Tw As said above, the foregoing is only valid for monovariant systems (no mixed crystals former). However, this equation describes reality quite well (Fig. 2.30). 2.3.2.6.2 Solubility of gases in oils and fats. Solubility of gases plays a role during fats and oils processing. Absorption of oxygen is the basis for later oxidation, and the solubility of hydrogen is important for hardening. Oils are sometimes protected by saturating them with nitrogen, which is also used to whip up some end-products. Formo (1979) gives some linear equations for the solubility of gases [volume dissolved at 760 mm Hg pressure in a volume of oil; tc ("C); tF as follows: (OF)]
(i) S(H,) = 0.0295 + 0.000497 . tc (ii) s ( N 2 ) = 0.0590 + 0.000400 ' tc (iii) s ( 0 2 ) = 0.1157 + 0.000443 ' ?c (iV) S(c0)= 0.0890 + 0.000400 ' fc
-
S(H,) = 0.04544 + 0.000895 tF s(N2) = 0.07180 + 0.000720 ' t F s(0,) = 0.12988 + 0.000797 ' fF S(c0)= 0.10180 + 0.000720' fF
[2.23]
93
Composition, Structure, Physical Data, and Chemistry
Solubility In benzene [% w/w]
10,000 : j i Fatty Acid Caprylic
1,000 i j i ~
Caprlnic
100
+
Lauric
A
Myristic
;:: ...
10
Palmitic
: : I
. . ..
... ...
Stearic
1 i. . :. . . ..
... ...
#
0
10
20
30
40
(92'F)
(SO)
(68)
(86)
(104)
50
(122)
60
70
(140) (lSBeFj
Temperature ["C]
Fig. 2.26. Solubility of different fatty acids in benzene (after Bailey 1950).
The solubility of oxygen is one third to two thirds lower in refined than in crude oils (Ah0and Wahlroos 1967); it increases with free fatty acids (FFA), doubling at about 30%FFA. 2.3.2.6.3 Solubility of water in fats and oils and vice versa. The solubility of water in oils is very low. This small amount is normally of no importance in all technical operations, because water either does not disturb the operation or it can easily be removed. Obviously, that is why almost no data can be found in literature Solubility of stearic acid I96 wt/wtl 10,000
Solvent: 'Toluene I
1
1
1,000
+
'""i
+
*
1
(SOY
Cyclohexane
* Benzene
10
0.1 V 10
* 1 ,CDioxane
Acetonitrile Nltromethane
I 20 (88)
30
40
(6'3)
(104)
50
(122)
6q
(140 Fl
Temperature ['C]
Fig. 2.27. Solubility of stearic acid in different solvents (after Bailey 1950).
Fats and Oils Handbook
94
Solubility in benzene [% w/w]
100 Triglyceride Tricaprin +
Trilaurin
* Trimyristin 9
Tripalmitin
10
Tristearin
,
,
0
10
20
30
40
50
60
70
(32'F)
(50)
(68)
(88)
(104)
(132)
(140)
(158'F)
d
Temperature ["C]
Fig. 2.28. Solubility of single acid triglycerides in benzene (after Bailey 1950).
about solubility of water in oil. For winterized cottonseed oil, Parsons and Holmberg (1937) found 0.075% solubility at 0°C and 0.13% at 32.5"Cwith a linear relation between these points. Outside of this range, solubility rises more quickly. As a trend, it is higher in oils with shorter fatty acid chain lengths (e.g., coconut oil) and increases dramaticdly in oils with hydroxyl groups such as castor bean oil.
Solubility of tristearin [% w/w] Solvent +
Chloroformium
* Benzene * Carbondisulfide
* Ethylether +
0.1
,
0.01 0
(32'F)
10
(50)
Ethanol
I
20
(68)
30
(86)
40
(104)
50
(122)
60
79
(140) (158 F)
Temperature ["C]
Fig. 2.29. Solubility of tristearine in different solvents (after Bailey 1950).
Composition, Structure, Physical Data, and Chemistry
95
Solubility [Mol%] 100
+A
PPO in trilinolein
+B
POP in trilinolein
+C SOS in trilinolein +D
hard. peanut oil / LO
+E hard. peanut oil I LO 10
*F
PPP in triolein
+G SSS in triolein +H SSS in trilinolein
1 15
(59’6
25
(77)
35
(95)
45
(113)
Temperature
55
(131)
65
(149
F)
P = Palrnitic acid S = Stearic acid 0 Oleic acid LO= Linoleic acid
[“C]
Fig. 2.30. Solubility of stearins in oleins (after Hannewijk eta/. 1964).
2.3.2.7 Smoke Point, Flash Point, and Fire Point. The knowledge of these data is of limited interest for oil and fat processing because great care is taken to ensure absence of oxygen when working at higher temperatures. The data are of more importance for those working with oil and fat products, e.g., deep frying. The values given differ slightly among the specific oils because their triglyceride composition varies, as expected in a natural product. It is primarily the FFA content that influences all three points substantially, as shown by Bailey (1951) and Morgan (1942); see Fig. 2.31. The fatty acid composition of the oils and fats plays a minor role and is of influence only when shifting towards medium and short chain lengths. Coconut oil, for example has a significantly lower smoke point. The degree of unsaturation does not appear to play an important role (Table 2.23). The term “smoke point” is misleading because there is no smoke, but there are condensed vapors (clouds) of fatty acids and other lipids. At the fire point, the oil is “actively” burning, whereas at the flash point, decomposition products can be inflamed merely when coming in contact with a flame. For shortenings, the following equation for the relationship between FFA content and smoke point has been developed by Zabik (1962):
FFA = 0.0445 - 0.00174 Ts 2 0.018
[2.24]
where FFA is the percentage of free fatty acids and Ts is the smoke point (“(2). The temperatures given should not disguise the fact that, for igniting an oil, how finely it is dispersed, i.e., its surface area, is also very important. If it is very
Fats and Oils Handbook
96
Free fatty acids
[%I
3.01
’09
$$!
(SW 150
(212 F)
$G
$9:
0
Temperature [‘C]
Fig. 2.31. Smoke, flash, and fire point are dependent on their fatty acid content (after Bailey 1951 and Morgan 1942).
finely dispersed, it can ignite or detonate at much lower temperatures when corning into contact with oxygen. This is important when filters in which the oil is finely dispersed on an adsorbent (such as bleaching earth) are opened when still hot. 2.3.2.8 Refractive Index. The refractive index gives the ratio between the angle of incident light and the refracted beam when passing through a medium. Oils and fats may be characterized by the refractive index, and the progress of a chemical TABLE 2.23 Smoke Point, Flash Point, and Fire Point of Fully Refined Oil9 ~
Oil Rapeseed oil Peanut oil - peanut oil - hardened 32/34 Cottonseed oil - cottonseed oil Soybean oil - soybean oil - hardened 42/44 Sunflower oil Coconut oil Palm oil
0.08 0.09 0.1 1 0.04 0.04 0.1 8 0.04
-
0.04
0.10 0.20
0.06
218 207 198 226 223 185 213 242 223 209 194 223
424 405 388 439 433 365 415 468 433 408 381 433
317 315 333 314 322 318 317 330 318 316 288 314
603 599 631 597 612 604 603 626 604 601 550 597
%urces: Rirnpl (1963), Morgan (1942), W i l e r and Markley (1940), and Pardun (1969).
344 342 363 340 342 357 342 360 342 341 329 341
65 1 648 685 644 648 675 648 680 648 646 624 646
-
Composition, Structure, Physical Data, and Chemistry
97
reaction may be monitored by measuring it. Lund (1922) found an equation that allows calculation of the refractive index of oils and melted fats from the saponification value and the iodine value: t ~ D= t X,
- O.oooO8 * SV + O.ooOo107 . IV
[2.25]
where SV is the saponification value, IV is the iodine value, t is the temperature ("C), x, = 1.4686 for t = 40°C and xt = 1.4650 for t = 50°C. According to Pardun (1976), the equation works satisfactorily only when fresh fats of natural'origin are used (i,e., not oxidized or hardened). In analogy to Chapter 2.3.2.3, Equation [2.25] can be simplified to estimate the order of magnitude more easily. Assuming an average saponification value of 200, it becomes the following:
ID' = X , - 0.016 + O.ooOo107 IV
[2.26]
*
or, for the usual measuring temperature of 40"C, [2.27] Tables 2.24 and 2.25 show refractive indices for single acid triglycerides and for common oils and fats. By plotting the refractive.index mean values of the oils and fats (from Table 2.25) against the mean iodine values from the fact files (Chapters 3 and 4), a regression line can be calculated. The boxes symbolize the ranges of iodine values and the refractive index at 40'C (Fig. 2.32). With a correlation coefficient of 0.989, their relationship is represented by the following equation: nD4'
= 1.44764 + 0.0001528 ' Iv
[2.28]
TABLE 2.24 Refractive Indices of Single-Acid Triglycerides GA,a nDX Fatty acid A
A= c6:0 C8:O
Cl0:O Cl2:O c14:0 cl6:O C18:O
C18:l
Cl8:2 c183
n~~Triglyceride CA3
20°C (68°F)
6OoC (140°F)
20°C (68OF)
70°C (1 58°F)
1.4441 1.4480
-
-
-
-
1.4370 1.4402 1.4428
-
1.4169 1.4230 1.4273 1.4309 1.4337
1.4582 1.4699 1.4800
-
-
-
1.4471 1.4548 1.4645 1.4741
-
aSources: Wheeler eta/. (1 9401, Joglekarand Watson (1 928), and Henkel and Cie (1 971).
Fats and Oils Handbook
98
TABLE 2.25 Refractive Indices of Fats and Oil9 Fatloil
nD40
Milkfat Lard Tallow Mutton tallow Pott whale oil
at 4OoC (1 04°F)
1.452-1.457 1.448-1.460 i ,448-1.460 1.448-1.460 1.467-1.475 1.465-1.467 i . 4 5 a i ,466 1.466-1.470 1.472-1.475 1.467-1.469 1.460-1.465 1.465-1.469 1.467-1.470 1.465-1.468
Fish oil Rapeseed oil (LEAR) Cottonseed oil Soybean oil Linseed oil Sunflower oil Peanut oil Sesame oil Safflower oil Corn oil Grape seed oil Walnut oil Niger seed oil Wheat germ oil Rice bran oil Poppy seed oil Mustard seed oil Palm oil Olive oil Avocado oi I Coconut oil Palm kernel oil Cocoa butter Babassu oil Shea butter lllip6 butter Mowrah butter Borneo tallow
-
-
1.449-1.455 1.4677-1.4705 1.448-1.450 1.448-1.452 1.456-1.458 1.448-1.451 1.465-1.466 1.459-1.462 1.458-1.461
-
1.457-1.461
-
1.455-1.458 1.456-1.458 1.470-1.478 1.464-1.466 1.466-1.468 1.465-1.469 1.472-1.475 1.466-1.468 1.461-1.465 1.465-1.468 1.467-1.469 1.465-1.466 1.461-1.471 1.469-1.475 1.467-1.469 1 . m - 1 ,478 1.466-1.469 1.467-1.470 1,463-1.466 1.453-1.456 1.461-1.462 1.461-1.465 1.448-1.450 1.449-1.450 1.456-1.458 1.449-1.451 1.463-1.466 1.459-1.462 1.458-1.461 1.456-1.457
~~
aSources: Left column, Codex Alirnentarius; right column, Wissebach (1969)
2.4 Chemical Reactions
Except for hardening, no purely chemical reactions are conducted in oils and fats processing. However, unwanted nontriglyceride components may be separated by chemical means without affecting the remaining triglycerides. An example are FFA that are saponified by alkali and separated via the aqueous phase. Together with the intentional reactions during processing, a natural product undergoes a broad range of reactions that are triggered or promoted by its natural environment or induced during processing. These reactions are described in the following sections.
99
Composition, Structure, Physical Data, and Chemistry
Iodine value
2ool 200
150
150
loo(. 100
50 0 1.44%
1.453
1.458
1.463
1.468
1.473
1.47%
Refractive index
Fig. 2.32. Relationship between refraction index and iodine value of fats and oils.
2.4.1 lsomerization
2.4.7.1Geometrical Isomerization. Natural vegetable oils and fats contain unsaturated acids almost exclusively in the cis form. At high temperature (around 150"C), with surface active components (such as Kieselgur and bleaching earth) present, and during hardening, these double bonds can be isomerized into the trans form. As mentioned previously, vegetable oils and fats are almost trans free (below detection limit in seeds). Trans fatty acids occur in most animal fats, e.g., in butterfat at a level of 2 . 5 4 5 %(varying between summer- and winter-butter) (Patton et al. 1960). Kaufmann and Mankel (1964) found considerable amounts of trans fatty acids in beef tallow (4.6-lo%),goat (6.8-11.1%)and mutton (10.7-15.8%). 2.4.7.2 Positional Isomerization. As well as geometrical isomerization, positional isomerization can also take place, which means a shift of isolated double bonds toward a structure containing more conjugated double bonds. This isomerization can occur at very high temperatures during alkali treatment. Such conditions do not occur during correct processing of oils and fats for edible purposes.
2.4.2 Polymerization
If fats and oils are heated above 250'C and kept at that temperature, the probability of fatty acid dimerization (intermolecular) or cyclization (intramolecular) increas-
Fats and Oils Handbook
100
es. Because only thermal dimerization can be observed under normal conditions of oils and fats processing, the term polymerization, frequently used for this phenomenon, is misleading. Only in refining are the temperatures applied at levels high enough to reach that range. Therefore, they have to be monitored carefully (see Chapters 7.4 and 7.5). Because the reaction is time dependent, residence time has to be kept as short as possible. Great efforts in recent years have succeeded in drastically reducing dimerization to such an extent that it can almost be avoided in well-run refineries. If oil is kept for an extended period in an open atmosphere at high temperature (e.g., deep frying), oxidative polymerization can occur, as indicated by a deeper color and increased viscosity. In oxidative polymerization, fatty acid molecules are intramolecularly or intermolecularly bound via an oxygen bridge. Splitting off oxygen can lead to cyclization, dimerization and polymerization. Polymerization is technologically used only for oils that are not intended for edible purposes. Tung oil, for example, is polymerized by being kept at 300°C for 12 min; a cross-linked polymer is formed. 2.4.3 Au toxidation
Autoxidation is a radical chain reaction. After an induction period, it may run very fast under certain circumstances. A chemical attack on the alkyl group is followed by a chain reaction, resulting in a hydroperoxide group (-OOH) in the chain. The chain reaction is started by peroxy-, alkoxy- and alkyl-radicals
R-OO', R-O',
R'
[2.29]
The chain reaction proceeds by reaction with oxygen or RH
R' R-00' R-0'
+
O=O
+
R-H R-H
+
+ -+ +
R-00' R-OOH+R' R-OH+R'
[2.30]
It is accelerated by branching of the chain
R-OOH 2R-OOH
-+ -+
R-0'
+
R-0' +
'OH R-OO'
+ HzO
[2.31]
The chain reaction ends by combination of two radicals
R' R' R' R-0' R-OO' R-0'
+ + +
+ +
+
R' R-0' R-OO' R-00' R-OO' R-0'
[2.32]
Composition, Structure, Physical Data, and Chemistry
101
Autoxidation is promoted by heat and light (energy) and heavy metals can catalyze the process. The energy that is needed to split an allyl-positioned H-atom decreases from 99 kcal/mol for the methylene group via 80 kcaVmol for a molecule with one allylic group to 40 kcal/mol for a molecule with three allylic groups. Highly unsaturated oils are especially susceptible to this type of reaction. The hydroperoxides formed (they themselves are almost neutral in taste) react further to aldehydes, ketones and fatty acids, all of which negatively influence taste (see also Equation [2.33]. These are removed during deodorization (see Chapter 7.4). Gunstone and Hilditch (1945) gave the relative reaction rates (R) for the oxidation of oleic acid (R = 1) c linoleic acid (R = 10) c linolenic acid (R = 25). Erickson and List (1985) calculated the inherent stability of common oils and fats, giving reaction rates that are naturally inversely propodonal to the oxidation stability, i.e., the higher the reaction rate, the lower the stability (Table 2.26). Belitz and Grosch (1982) determined the speed of oxidation for unsaturated C,, fatty acids (Table 2.27) and described the oxidation mechanisms. Natural antioxidants in vegetable oils and chelate-building additives, such as citric acids that can bind trace metals, help to avoid oxidation. To prevent metal catalysis of oxidation, processing equipment for fats and oils should not be fabricated in mild steel. However, mild steel can be coated to prevent contamination of the oil by trace metals. This coating can be of synthetic resin or resin from polymerized edible oil. For the latter, the equipment is filled several times with hot oil so that a thin film of polymerized oil resin builds up on the walls as a protectant. Under certain circumstances, lipochromes, natural antioxidants such as carotinoids, can also act prooxidatively under the influence of light. It is therefore recTABLE 2.26 Relative Rates of Reactivity of Common Oils and Fats. Stability Calculated as Decimal Fraction Fatty Acids Multiplied by Relative Rate of Reaction with Oxygen of Each Fatty Acidd Oillfat Safflower oil Soybean oil Sunflower oil Corn oil Rapeseed oil (LEAR) Cottonseed oi I Peanut oil Lard Olive oil Palm oil Tallow Palm kernel oil Coconut oil 'Source: Erikson (1985).
Stability
Iodine value
7.6 7.0 6.8 6.2 5.5 5.4 3.7 1.7 1.5 1.3 0.86 0.27 0.24
149 132 136 128 120 110 100 62 82 50 44 13 8
Fats and Oils Handbook
I02
TABLE 2.27 Rate of Oxidation of Fatty Acidsa C
Fatty acid
Induction period (h)
18:O 18:l 18:2 18:3
Stearic Oleic Linoleic Linolenic
-
Relative speed of oxidation
1
82 19 1.34
100 1,200 2,500
aSource: Belie and Crosch (1982).
ommended that packaging chosen for products containing deodorized oils be impermeable to light or able to absorb those wave lengths that start the oxidation processes. 2.4.4 Hydrolytic Splitting (lipolysis)
Hydrolytic splitting becomes a problem only when microorganisms or enzymes affect fats and oils. Fats and oils are quite resistant against an attack of water alone. However, it has to be taken into account that the activity of microorganisms increases with the water content and is possible only above a certain water content. At 2 0 T , -0.1% of water is soluble in oil, and solubility increases with temperature. Enzymes may arise from the fat itself (in seed oils from the seeds, for example) or from microorganisms that settle on the fat or oil. In particular, molds such as Aspergillus niger, produce high quantities of enzymes. During the sequence of processing steps, hydrolytic attack is a problem only during oilseed storage and transport. After extraction, the risk is low unless storage conditions are poor, because enzymes are usually inactivated by then. In principle, fat can be split more easily if fatty acids are short chained. The enzyme reaction begins with triglycerides because the reaction rate decreases in the sequence triglyceride > diglyceride > monoglyceride. There are unspecific lipases and also others that specifically split certain fatty acids or stereospecifically attack certain positions of the triglyceride (see Chapter 6.4). 2.4.5 Saponification
Free fatty acids react with alkali to form soaps as follows:
R-COOH + NaOH + R-COONa + H,O
[2.34]
The sodium soaps formed are water soluble enough to be separated from the oil or fat as an aqueous solution. As a side reaction, a very small part of the triglycerides is saponified, i.e., hydrolyzed. C3HS(COOR),+ 3 NaOH + C,H,(OH),
+ 3 NaOOCR
[2.35]
composition, Structure, Physical Data, and Chemistry
103
Hydrolysis takes place in three stages; usually the last stage is not reached. For analytical purposes, fats are saponified to determine the unsaponifiable content and to analyze its components (see Chapter 9.5). 2.5 Lipids
Oils and fats contain natural admixtures of nontriglycerides that stem from the seed or pulp in vegetable oils and from the adipose tissues in animal fat. These compounds occur associated with fats and oils in the animal or plant cells and dissolve in the oil. Like the oils and fats themselves, they belong to the large group of lipids. The classification of the compounds said to belong to this group is somewhat artificial and should be viewed from a historical perspective. The usual definition for lipids is that they are insoluble in water but soluble in nonpolar solvents. The group derived its name from its predominant members, fats and oils. In the following sections, the most important groups of lipids that occur in common oils and fats or their sources are illustrated. The following compounds associated with triglycerides belong to this group: hydrocarbons, carotinoids, oil-soluble vitamins, waxes, phospho-, glyco- and sulpholipids. A detailed list of all known lipids including their formula, data and references is given by Gunstone et al. (1986). 2.5.1 Lecithins
Oilseeds contain lecithins whose role is to stabilize the oil, i.e., the energy reserve, in the seeds. During oil extraction, part of these disperse in the oil; usually they are separated and sold as special products. Lecithin was discovered in 181l, when Vauquelin reported fat-containing substances from the brain that contained phosphorous. Schneider (1992) defines lecithin as follows: (i) historical: phosphorous-containing lipid from egg and brain; (ii) scientific: phosphatidylcholine (1,2-diacyl-sn-glycero- 3phosphorylcholine); (iii) commercial and legal: mixture of polar and nonpolar lipids with a minimum of 60% acetone-insoluble substances; (plant and animal origin; European ingredient no. E 322). Schneider also offers the following characteristics: (i) appearance: highly viscous or semiliquid or powder products of brown color; (hydrolyzed, highly viscous or pasty fluids, light brown or brown color); (ii) content: not ~ 6 0 % acetone-insoluble substances; (hydrolyzed, not 4 6 % acetone-insoluble substances); (iii) volatile substances: ~ 2 % determined after 1 h drying at 105°C (221°F); (iv) toluene insoluble: ~ 0 . 3 % (v) ; acid value: <35 mg potassium hydroxide/g; (hydrolyzed, <45 mg potassium hydroxide/g); (vi) peroxide value: 10 or less (mequivkg). The term lecithin encompasses those phospholipids that are found in the oil after extraction. There are three main classes of compounds: phosphatidylcholine (PC), phosphatidylethanolamine (PE), and phosphatidylinosite (PI) (Fig. 2.33). These three classes account for three fourths of all lecithins in soybean oil. Generally, soy lecithin is meant when lecithin is referred to because only soybean oil
Fats and Oils Handbook
104
II CH2 - 0 C - RI
-
Fig. 2.33. Chemical structure of the most important glycerophospholipids. contains substantial amounts (Table 2.28). The production of lecithin is described in Chapter 5.2.5.1. American soy lecithin contains -50% phosphatides, 4 . 5 % glycolipids and the same amount of carhhydrates (Weber 1981).The share of phosphatldylcholine is 4.070of the phosphatides,i.e., 20% of the total soy lecithin. The family of phospholipids houses a great variety of substances because of the very different fatty acid residues (R) and the possibility of binding to two different positions 1- (3-) or 2-. For saturated fatty acids, position 1- (3-) is preferred, for unsaturated, position 2-. Lecithins have many uses (Table 2.29), for example, as emulsifiers for margarines (see Chapter 8.2). Pardun (1988) gives a very detailed description of all aspects of lecithins in a monograph. Crude oils extracted each year contain -850,000 tons of lecithin of which -140,ooO tons are produced. TABLE 2.20 Phosphatides in Oilseeds and Seed Oila Phosphatides (YO) in seedshans
seed oil
Soybeans
1.5
Cottonseed Sunflower seed Peanuts Rapeseed Linseed Corn germs
1.ax2 1.3-2.7
0.5 0.5 1.5 0.75
0.5-1
aSowce: Pardun (1989).
-
-
.o
0.3-0.4 0.2-0.5 -1.8 1-2
Composition, Structure, Physical Data, and Chemistry
105
TABLE 2.29 Use of Lecithina YO
Margarine Baked products, chocolate, ice cream Animal feed Technical products Cosmetics Pharmaceutics
20-30 25-30 25-30 15-20 3-5 -3
aSource: Pardun (1989).
2.5.2 Hydrocarbons Aliphates and terpenoids occur naturally in fats and oils. Polycyclic hydrocarbons can also be found but come from the environment. This is especially hue for coconut oil (see Chapter 4.3.6) whose starting material, copra, is sometimes dried over an open fire. Aliphates and terpenoids are completely removed during fullrefining (seeChapter 7.7). Aliphatic hydrocarbons of natural origin have been identified up to a chain length of Cd5.Usually the chain length is odd-numbered and exists in both forms, unbranched and branched. From the terpenoid family, squalene must be mentioned, because it is contained in substantial amounts in some liver oils. It also occurs in olive oil in remarkable quantities compared with other vegetable oils; it is a marker substance to prove adulteration of olive oil. Squalene consists of six isoprene-units and contains six (all-trans) double bonds. It was discovered by Tsujimoto (1906); see Tables 2.30 and 2.31 and Fig. 2.34. TABLE 2.30 Squalene Content of Some Oilsa Oil Shark liver oil Cod-liver oil Olive oil Rice bran oil Corn oil Cottonseed oil Soybean oil Sunflower oil Sesame oil Linseed oil Peanut oil Rapeseed oil
Saualene Content (Yo) 20-88 0.33 0.090-0.708 0.33 0.0164.042 0.0034.01 5 0.002-0.022 0.008-0.019 0.003-0.01 1 0.004-0.028 0.0024.049 0.003402 8
aSources: Fitelson (1943a), Fabris and Vitagliano (1955), Hadorn (1953), Cracian eta/. (1963)and Tiufel eta/. (1940).
Fats and Oils Handbook
106
TABLE 2.31
Physical and Chemical Data of Squalene (Spinacene) 2,6,10,15,19,23-Hexamethyl-2, 6,10,14,18,22-tetracosahexaene Molecular weight Sum equation Form Iodine value Flash point Melting point ("C) (OF)
Boiling point
(OC) (OF)
Refractive index Density (2014)
WmL)
41 0.74 C30H50
Colorless oil
360-3 80
-200 --75 --lo3 280 at 17 hPa 536 at 17 hPa 1.496520 0.8584
Sources: Neumijller 1993, CRC 1976.
2.5.3 Sterols Sterols are polycyclic alcohols derived from sterane (cyclopentanoperhydrophenantrene) as a base structure. Under the name of sterane, other structures also can be found. Sterols account for the majority of the unsaponifiable fats and oils. Following their natural occurrence, one distinguishes among zoosterols from animal origin, phytosterols from plants and mycosterols from lower organisms such as fungi (Table 2.32). For the biosynthesis of sterols, see Ehrhart and Ruschig (1972). For rape oil, brassica-sterols are characteristic and are used to detect adulteration with other oilsin this case, adulteration of other oils with rape. Phytosterols are not absorbed by the human body, and lower organisms are not yet used as a source for fats and oils; to date, only zoosterols are of importance. However, phytosterols have recently gained attention as food additives in margarine. Table 2.32 gives the sterol content of some oils and fats. The most noted of these is cholesterol (Table 2.34), the first sterol that was discovered. Cholesterol's main source is in food of animal origin and especially animal fat. It is derived from sterol by adding an OH-group to C3, one methyl group each to CISand CI9,and an eight-carbon atom side chain to C,, (Fig. 2.35); physical and chemical data in Table 2.33. Vegetable oils and fats are cholesterol free, following the general agreement that all substances with a cholesterol content 4 0 ppm are regarded as cholesterol free. Cholesterol as a constituent of animal fat is important in so far as it can be linked to heart disease (see Chapter 1.4).
Fig. 2.34. Chemical structure of squalene.
Composition, Structure, Physical Data, and Chemistry
107
TABLE 2.32 Sterol Content (%) of Oils and Fat9 Butter oil Lard Tallow Mutton tallow Fish oil Cod-liver oil Halibut liver oil Herring oil (hardened) Menhaden oil (hardened) Coconut oil Palm kernel oil Cocoa butter Babassu oil Rapeseed oil (LEAR) Cottonseed oil Soybean oil Linseed oil Sunflower oil Peanut oil Sesame oil Safflower oil Corn oil Olive kernel oil
0.24-0.1 4 0.11-0.12 0.08-0.1 4 0.03-0.1 0 0.3 0.42-0.54 7.6 0.6 0.4 0.06-0.08 0.06-0.12 0.1 7-0.20 0.07-0.09 0.35-0.50 0.26-0.31 0.15-0.38 0.37-0.43 0.25-0.40 0.19-0.25 0.43-0.55 0.28-0.38 0.58-1 .OO 0.23-0.30
aSources: Copius Peereboom and Beekes (1 962), Fedeli eta/. (1 9661, ltoh eta/. (1973)and Urakam eta/. (1976).
2.5.4 Lipochromes
At present, more than 550 different carotenoids out of 100 million tons that nature produces every year have been isolated (Rodriguez-Amaya 1993). Carotenoids are derived from a base molecule consisting of a Cd0chain, which is composed from eight isoprenic units. Because of the conjugated double bonds and dependence on the class of substituents, they are colored dark yellow to red. Their absorption maxima lie between 425 and 525 nm. Carotenoids are sensitive to oxygen and light and are natural colorants for food. One distinguishes between a-, p-, and y-carotene (trivial names). a-Carotene contains one a- and one p-ionone ring; p-carotene contains two p-ionone rings; and y-carotene has one additional double bond but only one ring (Fig. 2.35). The main source for a-carotene is palm oil, in which it can account for more than 30% of all carotene contained. Carotenes function as provitamin A. Two molecules of vitamin A can be obtained by symmetrical splitting of p-carotene and the addition of water; a- and y-carotene yield only one molecule of vitamin A. Chlorophyll, another colorant, occurs mainly in those oils that are produced from beans, but also in rape, olive, and avocado oil. Apart from virgin olive oil (as
Fats and Oils Handbook
108
TABLE 2.33 Physical and Chemical Data of Some Sterols Cholesterol
Sterol Chemical formula Molecular weight Form
Density Melting point
C27H460
(g/mL)
PC) (OF)
Boiling point
("Cat hP) ("Flat hP)
386.67 Colorless rhombic or triclinic leaves 1.052 148.5 299.3 233 at 0.5 451 at0.5
Stigmasterol
Campesterol
PSitosterol
C29H480
C28H480
412.71 Colorless crystals
400.72 Colorless crystals
C2gH500 41 4.72 Colorless plates or needles
170 338
157-1 58 3 15-31 6
137-1 40 278-284
a result of the mild refining process), the green color is usually removed by refining. Crude rapeseed oil contains 5-10 ppm chlorophyll, soybean oil up to 1.5 ppm. 2.5.5 Lipovitamins
2.5.5.1 Vitamin A. As seen previously, carotenoids (Table 2.35) can be transformed into vitamin A (Fig. 2.37). Vitamin A (retinol, Table 2.36) itself is usually found in marine liver oils. Quantities can be high (Table 2.37). Deficiency of vitamin A can lead to night blindness or even blindness, with overdosage of vitamin A causing headache and vomiting. It is usually supplied as its acetate or palmitate. A recent overview is given by Woollard (1993) and Furr (1993). TABLE 2.34 Cholesterol Content of Some Oils and Fat9 FaVoil Crude oils Peanut Corn Soybean Olive Rapeseed Sunflower Refined oils Cottonseed oil Coconut oil Palm Palm kernel Animal fat Butter fat Lard ahrce: seher and Cundlach (1982).
Cholesterol (ppm)
10.3 19 7.9 6-7.4 12.5-33.6 1.6-7.7 15.4 5.6 8-2 6 8.4-28.5 2450 980
Composition, Structure, Physical Data, and Chemistry
Cholutro(:
R - H
cnpwkol: R - CH3 Bnuicr(.rm: R - CH3b22 stbmnw: R = 42t1sb22
m:R
H
1 09
= 4 z b
Fig. 2.35. Chemical structure of sterane and cholesterol.
2.5.5.2 Vitamin D. Vitamin D belongs to the family of sterols (Fig. 2.38, Table 2.38). Butter contains 0.0003-0.0015% vitamin D. Vegetable oils and fats and animal fat do not contain vitamin D in amounts worth mentioning. Therefore, vitamin D is added to many fat products such as margarine. Vitamin D deficiency manifests itself by osteomalacy (softening of bones due to insufficient incorporation of minerals), which can lead to deformations if it occurs at a young age. Overdosage leads to vomiting, diarrhea, and in severe cases, kidney damage. An overview on vitamin D is given by Woollard (1993) with the physiologic aspects covered by Maiyar and Norman (1993). 2.5.5.3 Vitamin E (Tocopherol). Tocopherols were first isolated in 1936 by Evans et al. Their structure was described in 1938 by Femholz. To class@ them systemati-
cally, Karrer (1938) introduced the name tocol for the base molecule, 2-methyl-2From this base, all seven known (4',8', 12-trimethyltridecyl)-6-hydroxychromane. tocopherols can be derived. They are built by supplementing positions 5,7 and 8 with one to three methyl groups (Fig. 2.39). The only important ones, however, are the a-, 7- and 6-tocopherols. Tocopherols are used as antioxidants because they trap TABLE 2.35 Physical and Chemical Data of Carotenes
a
Carotene
B
Y
Provitamin A Chemical formula Molecular weight Form Density Melting point
C40H56
C40H56
536.90 Deep purple plates or prisms
536.90 Deep purple hexagonal prisms
(g/mL)
1 .oo
1 .oo
("0
187.5 3 69
183 3 63
("F)
Sources: Roche 1970, CRC 1976, Ceigy 1968, Neurnuller 1987.
C40H56
536.90 Red prisms 177.5 352
Fats and Oils Handbook
110
Fig. 2.36. Chemical structure of the most important carotenoids. OH
Fig. 2.37. Chemical structure of vitamin A.
hydroperoxide intermediates both in vitro and in vivo, thus breaking the chain reaction. The tocopherol content of different oils is given in Table 2.39; an overview is given by Woollard (1993) and Pryor (1993). Table 2.40 presents the physical and chemical data of tocopherols. 2.5.6 Special Compounds of Single Seeds and Oils
Some oilseeds give rise to extracted oils that contain components that make them less suitable for nutrition or restrict their usage in animal feed. There are continuTABLE 2.36 Physical and Chemical Data of Vitamin A (Retinoi, Axerophytol)a Vitamin A Chemical formula Form Soluble in Insoluble in Molecular weight Melting point
C20H300
("C) ("C) (OF)
uvnl,,
C22H3202
Palmitate C36H6002
Yellow crystals
(OF)
Boiling point
Acetate
(nm)
Pale yellow Yellow oil crystal powder or crystal mass Fats and oils, alcohol, ether, chloroform, acetone Water 286.46 328.5 524.9 63-64 57-60 28-29 14547 134.5-1 40 a2-84 1 73-1 38 at l o 6 hPa 343-352 at l o 6 hPa 325 326 326
aOne international unit (1 iu) corresponds to 0.300 pg all-trans-retinolor to 0.344 pg of highly pure retinyl acetate or to 0.549 Fg retinyl palmitate. One retinol equivalent (RE) corresponds to 1 pg all-trans-retinol. Sources: Roche 1970, CRC 1976, Ceigy 1968, Neumuller 1987, Wollard 1993.
111
Composition, Structure, Physical Data, and Chemistry
TABLE 2.37 Vitamin Content of Fish Oils
Liver oil Cod Sea-salmon Halibut Tuna Whale
A (1000 I.E./g) 0.2-1 0 1- 3 2 0-3 00 30-80 30-50
D (i.E./g) 60-300 8C-100 200&4000
-
Source: Baltes (1975).
Fig. 2.38. Chemical structure of vitamins D, and D3.
ous efforts to eliminate such compounds from the seed by new sorts of cultivation. In part, these efforts have already been successful (see Chapter 4.3.5rape), but for other seeds, these restrictions still exist. Some of these compounds are described in the following sections. TABLE 2.38 Physical and Chemical Data of Vitamin D (Calciferol)a ~
~
D2
Vitamin D
(Ergocalciferol)
Chemical formula Molecular weight Form Soluble in insoluble in Melting point
C28H440
396.63
("C)
("0 Sublimation at Density (20/4) ha,
(g/mL) (nm)
Prisms fats and oils (slightly),alcohol ether chloroform water 115-118 2 39-244 0.0006 hPa 1.39920, 264.5
aOne international unit (1 iu) corresponds to 0.025 pg of crystalline vitamin D, or D,. Sources: Roche (19701, CRC (1976), Ceigy (1 968), Neumuller (19871, Wollard (1993).
~
D3 (Cholecalciferol) C29H440
384.62 Needles
84-85 183-1 85
264.5
Fats and Oils Handbook
112
Fig. 2.39. Chemical structure of tocopherols.
2.5.6.1 Sesarnol. Sesame oil contains small amounts of sesamol as well as -0.3% sesamolin, a glycoside of sesamol from which it can be obtained by hydrolysis. Additionally, there is 0.5-1.0% sesamin (Fig. 2.40, Table 2.41). 2.5.6.2 Gossypol. Gossypol is a major pigment in cottonseed and therefore a companion of cottonseed oil. It is a complex phenolic substance (Fig. 2.41, Table 2.42), forming poisonous yellow crystals that cause hemolysis by affecting membrane permeability; it does not appear in refined oil. However, it restricts the use of the meal (see Chapter 4.3.2).A detailed description is given by Marlunann and Rzhekhin (1969). 2.5.6.3 Glucosinolates of Rape. The glucosinolates of rape are derivatives of ally1 isothiocyanate (Fig. 2.42). Immediately after rapeseed has been reduced for extraction, hydolysis of the glucosinolate begins, transforming it into esters of isothiocyanicacid TABLE 2.39
Tocopherol Content of Oils and Fat9 Oh
OiVfat Palm oil Olive oil Soybean oil Cottonseed oil Sunflower seed oil Peanut oil Rapeseed oil Sesame oil Linseed oil Safflower oil Corn oil Palm kernel oil Coconut oil Cocoa butter Babassu oil Lard Tallow Fish oil
a 50-70 80-85 5-1 2 60-80 10-15 50 2-1 5
of Total tocopherols
P 0-6
0-4
-
0-7
-
-
0
0-2 90-95 37-50
0-1
-
-
c60 4-1 5
Y
6
3C-40 0-1 5 60-80 2wo 2-1 0 50 85-98
6-1 0
-
400-700 30-800 920-1800 900-1 100
0-4
500-800
0
15-30
-
0-2
0
95-98 5-6 5M3
0-1 0 0
c20 0-10
<20 75-97
c20
0-4
-
Total tocopherols (PPm)
0
480 800-1 200 188 1 1 0-280 300-3000 200-900 0
80 30-1 30 30 27 10 10
JSources:Lange (1950), Brown (1 952), Schmidt (19681, Taufel and Serzisko (1962), Cracian (19651, Hwrmann and G e m (19821, and Woollard (1993).
Composition, Structure, Physical Data, and Chemistry
113
TABLE 2.40 Physical and Chemical Data of Tocopherolsd Tocooherol -tocol Sum equation Molecular weight Form Soluble in Insoluble in (g/mL) Density Melting point (%C) ('/OF) Boiling point (%C)/at hP (%F)/at hP &ax (nm)
5,8-dimethyl
5,7,8-trimethyl
C28H4802
C29H5002
8- methyl
7,8-dimethyl C28H4802
C27H4602
416.66 Pale yellow viscous oil Oils and fats, alcohol, organic solvents Water
43 0.69
40.264
416.66
0.950 2.5-3.5 3 6.5-38.5 200-222113 39242811 3 294
200-2 1011 3 392-41 0/13 297
-3 to -2 2 6.5-2 8.5 200-2 1011 3 3 9 2 4 1 0/13 298
150176 302176 298
aOne international unit (1 IU) corresponds to 1 mg d!-a-tocopherol-acetate. Sources: Roche (1 970), CRC (1 976), Ceigy (1 968), Neumuller (19871, Wollard (1993).
Fig. 2.40. Chemical structure of sesamol (left) and sesamolin (right).
To prevent the formation of these harmful (for animal feed) substances, the enzyme thioglucosinase is inactivated by conditioning the seed (see Chapter 5.2.4.1). By cultivation of 00-rape varieties, the amount of glucosinates has decreased substantially so that they are now of minor importance. The ally1 isothiocyanates can rearrange to isothiocyanates or thiocyanates or decompose to nitriles and sulfur. A more detailed overview is given by McGregor (1993). TABLE 2.41 Physical and Chemical Data of Sesamol, Sesamin, and Sesamolin Sesamol Molecular weight Sum equation Form Melting point Boiling point
138.12 C7H603
("C) ("F)
("C) ("F)
Colorless crystals 65-66 149-50 135-1Mat 16 hPa 275-284 at 16 hPa
Source: Budkowski (1964), CRC (1976), Neumuller (1987).
Sesamin
Sesamolin
354.34
370.34
C20H1 8O6
CZOH184
Needles 123-1 24 253-255
White plates 93-94 199-201
Fats and Oils Handbook
114
OH
Fig. 2.41. Chemical structure of gossypol.
TABLE 2.42 Physical and Chemical Data of Gossypol 1,1’,6,6‘,7,7’-Hexahydroxy-5,5’-diisopropyl-
3,3’-dimethyl[2,2’-binaphtalenel-8,8’-dicarboxy-aldehyde Molecular weight 518.84 Sum equation Form Melting point
C30H3008
(“C) (OF)
Canary yellow (poisonous) crystals 184 (crystallized from ether) 363
Source: Neurnuller 1987.
Fig. 2.42. Chemical structure of rape glucosinolates. References Aho, L., and Wahlroos, O., (1967) A Comparison Between Determinations of the Solubility of Oxygen in Oils by Exponential Dilution and Chemical Methods, J. Am. Oil Chem. SOC.4 4 , 6 5 4 6 . Bailey, A.E., (1950) Melting and Solidification of Fats, Interscience Publishers, New York. Bailey, A.E., (1951) Industrial Oil and Fat Products, Interscience Publishers, New York. Bailey, A.E., and Singleton, W.S. (1945) J. Am. Oil Chem. SOC. 22, 265. Bakes, J., (1975) Gewinnung und Verarbeitung von Nahrungsjetten, Paul Parey Verlag, Berlin. Baur, F.J., Jackson, F.L., Kopl, D.G., and Lutton, E.S., (1949) J . Am. Chem. SOC. 71, 3363-3366.
Composition, Structure, Physical Data, and Chemistry
115
Belitz, H.-D., and Grosch, W., (1982) in Lehrbuch der Lebensmittelchemie, Springer Verlag, Berlin. Berg, T.G.O., and Brimberg, U.I., (1983) Uber die Kinetik der Fettkristallisation, Fette, Seifen, Anstrichmittel 85, 142-149. Bernardini, E., (1985) Oils and Fats Processing, Publishing House, Rome. Blanc, J., (1969) Techniques modernes de fabrication des margarines, Rev. Fr. Corps Gras 16,457471. Boekenoogen, H.A., (1935) Die Viskositat der fetten Ole, Fettchem. Umschau 42, 177-180. Boekenogen, H.A., (1941) Olien Vetten, Oliezandan 26, 143, from Hilditch, T.P., and Williams P.N., ( 1 W ) The Chemical Constitution of Natural Fats, Chapman & Hall, London. Brown, F., (1952) The Estimation of Vitamin E, Biochem. J. 52, 523-526. Budkowski, P., (1964) Recent Research on Sesamin, Sesamolin and Related Compounds, J. Am. Chem. SOC.41, 280-285. Chapman, D., (1957a) The Structure of the Major Component Glyceride of Cocoa Butter and of Major Oleodisaturated Glyceride of Lard, J. Chem. SOC.1502-1508. Chapman, D., (1957b) Infrared Spectra and the Polymorphism of Glycerides III,Palmitodistearins and Dipalmitostearins,J. Chem. SOC.2715-2720. Chapman, D., (1957~)The 720 cm-1 Band in the Infrared Spectra of Crystallized Longchain Compounds IV, J. Chem. SOC.489-4491. Chapman, D., (1960) Infrared Spectroscopic Characterization of Glycerides, J. Am. Oil Chem. SOC.37,73. Charbonnet, G.H., and Singleton, W.S., (1947) Thermal Properties of Oils and Fats VI, Heat Capacity, Heats of Fusion and Transition and Entropy of Trilaurin, Trimyristin, Tripalmitin and Tristearin, J. Am. Oil Chem. SOC.24, 140-142. Chevreuil, M.E., Recherches sur les Corps Gras, 1823. Chibnall, A.C., Piper, S.H., and Williams, E.F., (1953) Biochem. J. 55,707. Clark, P.E., Waldeland, C.R., and Cross, R.P., (1946) Specific Heat of Vegetable Oils from 0°C to 280°C, Ind. Eng. Chem. 38,350-353. Clarkson, C.E., and Malkin, T., (1934) Alteration in Long Chain Compounds 11: An X-