Wave Propagation in Infinite Domains: With Applications to Structure Interaction (Lecture Notes in Applied and Computational Mechanics)

Lecture Notes in Applied and Computational Mechanics Volume 32 Series Editors Prof. Dr.-Ing. Friedrich Pfeiffer Prof. Dr...

Author: Lutz Lehmann

10 downloads 548 Views 16MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!

Report copyright / DMCA form

DOWNLOAD PDF

Lecture Notes in Applied and Computational Mechanics Volume 32 Series Editors Prof. Dr.-Ing. Friedrich Pfeiffer Prof. Dr.-Ing. Peter Wriggers

Lecture Notes in Applied and Computational Mechanics Edited by F. Pfeiffer and P. Wriggers Further volumes of this series found on our homepage: springer.com

Vol. 32: Bardzokas, D.I.; Filshtinsky, M.L.; Filshtinsky, L.A. (Eds.) Mathematical Methods in Electro-Magneto-Elasticity 530 p. 2007 [978-3-540-71030-1] Vol. 31: Lehmann, L. (Ed.) Wave Propagation in Infinite Domains 186 p. 2007 [978-3-540-71108-7] Vol. 30: Stupkiewicz, S. (Ed.) Micromechanics of Contact and Interphase Layers 206 p. 2006 [978-3-540-49716-5] Vol. 29: Schanz, M.; Steinbach, O. (Eds.) Boundary Element Analysis 571 p. 2006 [978-3-540-47465-4] Vol. 28: Helmig, R.; Mielke, A.; Wohlmuth, B.I. (Eds.) Multifield Problems in Solid and Fluid Mechanics 571 p. 2006 [978-3-540-34959-4] Vol. 27: Wriggers P., Nackenhorst U. (Eds.) Analysis and Simulation of Contact Problems 395 p. 2006 [978-3-540-31760-9] Vol. 26: Nowacki, J.P. Static and Dynamic Coupled Fields in Bodies with Piezoeffects or Polarization Gradient 209 p. 2006 [978-3-540-31668-8] Vol. 25: Chen C.-N. Discrete Element Analysis Methods of Generic Differential Quadratures 282 p. 2006 [978-3-540-28947-0] Vol. 24: Schenk, C.A., Schuºller. G Uncertainty Assessment of Large Finite Element Systems 165 p. 2006 [978-3-540-25343-3] Vol. 23: Frmond M., Maceri F. (Eds.) Mechanical Modelling and Computational Issues in Civil Engineering 400 p. 2005 [978-3-540-25567-3] Vol. 22: Chang C.H. Mechanics of Elastic Structures with Inclined Members: Analysis of Vibration, Buckling and Bending of X-Braced Frames and Conical Shells 190 p. 2004 [978-3-540-24384-7] Vol. 21: Hinkelmann R. Efficient Numerical Methods and Information-Processing Techniques for Modeling Hydro- and Environmental Systems 305 p. 2005 [978-3-540-24146-1] Vol. 20: Zohdi T.I., Wriggers P. Introduction to Computational Micromechanics 196 p. 2005 [978-3-540-22820-2] Vol. 19: McCallen R., Browand F., Ross J. (Eds.) The Aerodynamics of Heavy Vehicles:

Trucks, Buses, and Trains 567 p. 2004 [978-3-540-22088-6] Vol. 18: Leine, R.I., Nijmeijer, H. Dynamics and Bifurcations of Non-Smooth Mechanical Systems 236 p. 2004 [978-3-540-21987-3] Vol. 17: Hurtado, J.E. Structural Reliability: Statistical Learning Perspectives 257 p. 2004 [978-3-540-21963-7] Vol. 16: Kienzler R., Altenbach H., Ott I. (Eds.) Theories of Plates and Shells: Critical Review and New Applications 238 p. 2004 [978-3-540-20997-3] Vol. 15: Dyszlewicz, J. Micropolar Theory of Elasticity 356 p. 2004 [978-3-540-41835-1] Vol. 14: Frmond M., Maceri F. (Eds.) Novel Approaches in Civil Engineering 400 p. 2003 [978-3-540-41836-8] Vol. 13: Kolymbas D. (Eds.) Advanced Mathematical and Computational Geomechanics 315 p. 2003 [978-3-540-40547-4] Vol. 12: Wendland W., Efendiev M. (Eds.) Analysis and Simulation of Multifield Problems 381 p. 2003 [978-3-540-00696-1] Vol. 11: Hutter K., Kirchner N. (Eds.) Dynamic Response of Granular and Porous Materials under Large and Catastrophic Deformations 426 p. 2003 [978-3-540-00849-1] Vol. 10: Hutter K., Baaser H. (Eds.) Deformation and Failure in Metallic Materials 409 p. 2003 [978-3-540-00848-4] Vol. 9: Skrzypek J., Ganczarski A.W. (Eds.) Anisotropic Behaviour of Damaged Materials 366 p. 2003 [978-3-540-00437-0] Vol. 8: Kowalski, S.J. Thermomechanics of Drying Processes 365 p. 2003 [978-3-540-00412-7] Vol. 7: Shlyannikov, V.N. Elastic-Plastic Mixed-Mode Fracture Criteria and Parameters 246 p. 2002 [978-3-540-44316-2] Vol. 6: Popp K., Schiehlen W. (Eds.) System Dynamics and Long-Term Behaviour of Railway Vehicles, Track and Subgrade 488 p. 2002 [978-3-540-43892-2]

Mathematical Methods in Electro-Magneto-Elasticity Demosthenis I. Bardzokas Michael L. Filshtinsky Leonid A. Filshtinsky •

•

Authors D.I. Bardzokas National Technical University of Athens School of Applied Mathematics and Physical Sciences Department of Mechanics Laboratory of Testing and Materials Athens, Hellas, Greece L.A. Filshtinsky Dept. of Mathematical Physics Sumy State University Sumy, Ukraina M.L. Filshtinsky†

Library of Congress Control Number: 2007923590 ISSN

1613-7736

ISBN 978-3-540-71030-1

Springer Berlin Heidelberg New York

This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other ways, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable for prosecution under the German Copyright Law. Springer is a part of Springer Science+Business Media springer.com c Springer-Verlag Berlin Heidelberg 2007 The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Cover design: Künkel & Lopka, Heidelberg Typesetting by the authors Production: Integra Software Services Pvt. Ltd., Pondicherry, India Printed on acid-free paper

SPIN: 11944416

45/3100/Integra

5 4 3 2 1 0

This book is dedicated to Michael Filshtinsky who had always a vision to create. This creation was expressed both in science and music.

Preface

The science of mechanics of coupled ﬁelds is a dynamic research area, studying in a uniﬁed way continuum mechanics, heat transfer phenomena and electromagnetism, i.e. branches of science that are usually studied separately. For a more rigorous and accurate description of the inﬂuence of static and dynamic loadings, high temperatures and strong electromagnetic ﬁelds on elastic media and constructions we need a single approach, i.e. one that has the potential to integrate all the above mentioned physical ﬁelds. The investigation of the mechanics of stressed-deformed media subject to coupled ﬁelds is one of the most important tasks in today’s material science with major technological importance. Our scope is the rigorous qualitative and quantitative analysis of the stressed-deformed states of materials and constructions and their physical and mechanical properties within the phenomenological theory of electro-magneto-thermo elasticity. For that reason we derive the constitutive equations that govern the behavior of the problem under study, we pose the appropriate boundary conditions and ﬁnally we present and apply the appropriate mathematical methods for their solution. General relations of the mechanics of deformed bodies interchanging with electromagnetic ﬁeld are used and special attention is paid to the construction of the theory of shells and plates made from piezoelectric materials. We present in detail art of the state mathematical methods for the solution of a broad class of two-dimensional problem of electroelasticity for multiconnected bodies. We also examine several static and dynamic problems for piecewise-homogeneous piezoelectric plates, weakened by cracks and openings. We mostly consider questions connected with the application of the method of boundary integral equations for the investigation of the problem of deformation of electroelastic waves on heterogeneities of various types. Special emphasis is given in the deﬁnition of strength and breakdown characteristics of bodies with defects. We state and solve some inverse problems of electroelasticity about optimal, in some sense, equations by parameters of strength and breakdown.

VIII

Preface

The interplay of coupled physical ﬁelds in anisotropic media introduces additional diﬃculties into the analysis of boundary problems of electro-magnetoelasticity. The boundary conditions are not usually separated, which leads to the necessity of consideration of compound boundary problems of mathematical physics. We believe that this monograph provides the theoretical background and the tools for the systematic analysis of electromegneto-elastic media with a broad spectrum of applications. This book is the condensation of a long scientiﬁc collaboration of the authors despite the fact that Dr. M. L. Filshtinsky, passed away unexpectedly 3 years ago. Michael L. Filshitinsky was born in 1961 in the town of Novosibirsk. In 1989 he received his PhD in Mathematical Physics at the Mechanic-Mathematical Faculty of the State University of Moscow (Lomonosov). His Thesis was entitled: “Solution of two-dimensional dynamical problems of elasticity and electroelasticity for cracked bodies”. The most characteristic aspect of the work of M.L. Filshtinsky was the combination of his natural talent and his hard work, for solving a vast number of novel and real-world problems. Another interesting component of his personality was his interest in music composition. M.L. Filshtinsky and us have published together many articles in international scientiﬁc journals and congress proceedings as well as 5 monographs in Russian language [[190, 254]–[256]] The present work is a small component of the knowledge of the great Soviet School in the area of Coupled Fields Mechanics and is part of an eﬀort to bring out the rich Russian literature in the area. At this point Prof. D.I. Bardzokas would also like to thank, with all his heart, his associate, friend and student George I. Sfyris as well as his colleague and good friend Constantinos I. Siettos for the help they provided in writing this monograph. Without their valuable help the publication of this work would be impossible. This book is for the specialists in Continuous Mechanics, Acoustics and Defectoscopy, and also for advanced undergraduate and graduate –level students in Applied Mathematics, Physics, Engineering Mechanics and Physical Sciences. D.I. Bardzokas Professor NTUA, Section of Mechanics, Greece L.A. Filshtinsky Professor of Sumy State Univerisity, Ukraine

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Physical Fields in Solid Bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Heat Field. Heat Conduction Equation in Solid Bodies . . . . . . . 1.1.1 Heat Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.2 Equilibrium Heat Equation . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.3 Heat Conduction Equation . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.4 Boundary Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Electromagnetic Fields. Maxwell’s Equations . . . . . . . . . . . . . . . . 1.2.1 The Laws of Electrodynamics in Integral Forms . . . . . . . 1.2.2 Maxwell’s Equations in Diﬀerential Forms . . . . . . . . . . . . 1.2.3 Magnetization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.4 Electric Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.5 The Balance Equation of the Electromagnetic Field’s Energy. Umov-Poynting Vector . . . . . . . . . . . . . . . . . . . . . . 1.2.6 Vector and Scalar Potentials of Electromagnetic Field . . 1.2.7 Boundary Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.8 Stationary Electromagnetic Field. Electrostatic Approximation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Stresses and Deformations. Hooke’s Law . . . . . . . . . . . . . . . . . . . . 1.3.1 State of Stress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.2 Equations of Equilibrium and Motion. Symmetry of Stress Tensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.3 Deformed State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.4 Equations of Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.5 Elastic Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.6 Hooke’s Law. Stress Potential . . . . . . . . . . . . . . . . . . . . . . . 1.3.7 Matrix Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Singular Physical Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4.1 Analysis of the Singularities of Physical Fields . . . . . . . . 1.4.2 The Electric Field of a Charged Conductive Disk . . . . . .

1 9 9 9 9 11 12 13 13 15 17 18 18 20 21 23 24 24 26 28 30 31 32 34 35 36 39

X

Contents

1.4.3 Mathematical Idealization of Cracks in an Elastic Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 1.4.4 Criterion of Fracture of a Body with a Crack . . . . . . . . . 56 2

Basic Equations of the Linear Electroelasticity . . . . . . . . . . . . . 2.1 The Linear Theory of the Piezoelectricity . . . . . . . . . . . . . . . . . . . 2.2 Equations of State for Piezoelectric Ceramics . . . . . . . . . . . . . . . 2.3 Two-Dimensional Problems of Electroelasticity . . . . . . . . . . . . . . 2.4 Boundary Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 Mechanics of Fracture of Piezoelectrics . . . . . . . . . . . . . . . . . . . . .

63 63 70 72 75 78

3

Static Problems of Electroelasticity for Bimorphs with Stress Concentrators . . . . . . . . . . . . . . . . . . . 85 3.1 Complex Representations of Solutions in Two-Dimensions . . . . 85 3.2 A Bimorph with Cracks in One of the Pair Components . . . . . . 91 3.3 Bimorph with Openings in One of the Pair Components . . . . . . 100 3.4 A Composite Plate with a Crack Crossing the Interphase . . . . . 106 3.5 A Composite Plate with an Opening Crossing the Interphase . . 112 3.6 Green’s Function for a Composite Plate with an Interphase Crack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 3.7 A Case of an Inner Crack Reaching the Interphase . . . . . . . . . . . 125

4

Diﬀraction of a Shear Wave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 4.1 An Anisotropic Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 4.2 A Piezoceramic Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 4.3 A Piezoceramic Halfspace. Free Boundary and Rigid Fixture Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 4.4 A Halfspace with a Crack Reaching the Boundary . . . . . . . . . . . 156 4.5 Harmonic Excitation of a Halfspace by External Sources . . . . . . 158 4.6 Arbitrary with Time Excitation of a Halfspace . . . . . . . . . . . . . . 162 4.7 A Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 4.8 A Halﬂayer. Various Variants of Boundary Conditions . . . . . . . . 174

5

Scattering of a Shear Wave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 5.1 A Space and a Half-Space with Tunnel Openings . . . . . . . . . . . . 181 5.2 Impulse Excitation of a Half-Space with Openings . . . . . . . . . . . 190 5.3 Stress Concentration in a Layer with Openings . . . . . . . . . . . . . . 193 5.4 A Half layer with Openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 5.5 A Space and a Halfspace with Cylindrical Inclusions. Integrodiﬀerential Equations of a Boundary Problem . . . . . . . . . 199 5.6 Interaction of Openings and Cracks in a Space . . . . . . . . . . . . . . 207 5.7 Fundamental Solution for a Composite Anisotropic Space . . . . . 216 5.8 An Anisotropic Bimorph with Tunnel Openings . . . . . . . . . . . . . 223

Contents

XI

6

Mixed Dynamic Problems of Electroelasticity for Piezoelectric Bodies with Surface Electrodes . . . . . . . . . . . 229 6.1 An Unbounded Medium with a Tunnel Opening. Direct and Inverse Piezoelectric Eﬀect . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 6.2 Interaction of Two Openings in an Unbounded Medium . . . . . . 237 6.3 Excitation of a Medium with an Opening by an Electric Impulse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 6.4 Excitation of Shear Waves in an Inﬁnite Cylinder with an Arbitrary System of Electrodes . . . . . . . . . . . . . . . . . . . . 245 6.5 A Hollow Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 6.6 A Halfspace with Tunnel Openings . . . . . . . . . . . . . . . . . . . . . . . . 255 6.7 A Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 6.8 Interaction of a Partially Electrodized Opening and Crack . . . . 280 6.9 An Opening Strengthened by a Rigid Stringer . . . . . . . . . . . . . . . 290

7

Harmonic Oscillations of Continuous Piezoceramic Cylinders with Inner Defects (Antiplane Deformation) . . . . 301 7.1 A Cylinder Weakened by Tunnel Cracks (Direct Piezoeﬀect) . . 301 7.2 A Cylinder with a Thin Rigid Inclusion . . . . . . . . . . . . . . . . . . . . 309 7.3 A Cylinder with a Crack Excited by a System of Electrodes . . . 317 7.4 A Cylinder With an Inclusion Excited by a System of Electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321

8

Electroacoustic Waves in Piezoceramic Media with Defects (Plane Deformation) . . . . . . . . . . . . . . . . . . . . . . . . . 333 8.1 Waves in a Homogeneous Medium . . . . . . . . . . . . . . . . . . . . . . . . . 333 8.2 General Representations of Coupled Fields in a Medium of the Hexagonal Class of Symmetry . . . . . . . . . . . . . . . . . . . . . . . 338 8.3 An Unbounded Medium with Tunnel Cracks. Integral Representations of Complex Potentials . . . . . . . . . . . . . . . . . . . . . 342 8.4 Integrodiﬀerential Equations of a Boundary Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 8.5 Reducing to a Case of an Isotropic Medium . . . . . . . . . . . . . . . . . 348 8.6 Eﬀect of Mutual Hardening of Cracks . . . . . . . . . . . . . . . . . . . . . . 353 8.7 An Inertial Eﬀect in the Process of Impact Eﬀect on a Crack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 8.8 A Matrix of Fundamental Solutions of Two-Dimensional Equations of Electroelasticity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 8.9 An Unbounded Medium with Tunnel Openings . . . . . . . . . . . . . . 365 8.10 Oscillation of a Cylinder Under the Inﬂuence of Pulsating Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371

9

Magnetoelasticity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373 9.1 Magnetic Field and its Properties . . . . . . . . . . . . . . . . . . . . . . . . . . 373 9.1.1 Action of the Magnetic Field on the Moving Electric Charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374

XII

Contents

9.2 The Magnetic Properties of the Substance . . . . . . . . . . . . . . . . . . 375 9.2.1 Action of External Magnetic Field on the Substance . . . 375 9.2.2 Classiﬁcation of Substances According to Magnetic Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 9.3 General Relations of the Magneto-Elasticity of Electro-Conductive Bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382 9.4 Linear Magneto-Elasticity of Diamagnetic Materials . . . . . . . . . 384 9.5 Equations of Magneto-Elasticity . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 10 Induced Currents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389 10.1 Initial Relations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389 10.2 The Current-Conducting Medium with Tunnel Cracks in a Magnetic Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 10.2.1 Antiplane Deformation of the Inﬁnite Ideal Conductor with Tunnel Cracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 10.3 Half – Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396 10.4 Layer and Semi – Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402 10.5 Stress Concentration in the Opening in the Conducting Half-Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408 10.5.1 Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411 10.6 Interaction of Crack and Opening in the Current-Conducting Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411 10.7 Diﬀraction of Shear Magneto-Elastic Wave in the Inclusions . . 414 10.8 Fundamental Solution of Two – Dimensional Equations . . . . . . 420 10.9 Diﬀraction of Magneto-Elastic Waves on the Opening in a Magnetic Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 10.9.1 Statement of Boundary-Value Problem. Integral Representations of the Solutions . . . . . . . . . . . . . . . . . . . . . 425 10.9.2 Integral Equations of the Boundary Value Problem . . . . 431 10.9.3 Dynamic Intensity of Conductor in the Opening . . . . . . . 432 11 Inﬂuence of Magnetizability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441 11.1 Initial Relations of Linear Magneto-Elasticity of Ferromagnetic Materials. Complex Representations of the Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441 11.2 Ferromagnetic Medium, Weakened by the Tunnel Cracks . . . . . 444 11.3 Generalized Kirsh Problem for Ferromagnetic Medium with Cavity in Strong Magnetic Field . . . . . . . . . . . . . . . . . . . . . . 454 11.3.1 Statement of the Problem. Complex Representation of the Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454 11.3.2 Stress Concentration in Circular Opening . . . . . . . . . . . . . 458 11.3.3 Opening of Arbitrary Conﬁguration in Ferromagnetic Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461

Contents

XIII

12 Optimal Control of Physical Fields in Piezoelectric Bodies with Defects . . . . . . . . . . . . . . . . . . . . . . . 465 12.1 Optimization of Fracture Characteristics of Anisotropic Semi-Inﬁnite Plate with Cracks . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 12.1.1 Direct Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 12.1.2 Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466 12.2 Statement of Certain Optimization Problems . . . . . . . . . . . . . . . . 472 12.3 Control of the Parameters of Fracture in Piezoceramic Half-Plane with Cracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476 12.4 Control of the Stress Intensity Factor in a Bimorph with an Interphase Crack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479 12.5 On the Application of the General Problem of Moments to Certain Optimization Problems of the Theory of Elasticity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482 12.5.1 Statement of the Problems . . . . . . . . . . . . . . . . . . . . . . . . . 482 12.5.2 Approximational Approach . . . . . . . . . . . . . . . . . . . . . . . . . 484 12.6 Pulse Boundary Control of the Stressed State of the Half-Plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490 12.6.1 Statement of the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . 490 12.6.2 Control of Elastic State . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492 12.6.3 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494 12.7 Boundary Control of the Stress Intensity Factors in a Halfspace with a Crack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497 12.8 Control of Electric Charges on the Electrodes in a Layer with a Partially Electrodized Opening . . . . . . . . . . . . 499 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517 Appendix A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509 Appendix B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511 B.1 The Approximate Solution of Singular Integrodiﬀerential Equations Prescribed on Smooth Disconnected Contours . . . . . 511 B.2 Solution of the Singular Integral Equations Given on Smooth Connected Contours . . . . . . . . . . . . . . . . . . . . . 514 B.3 Numerical Solution of the Singular Integrodiﬀerential Equations Given on Connected Contours . . . . . . . . . . . . . . . . . . . 515

Introduction

For the last ten years the section of the mechanics of the deformed solid body, that is usually called electroelasticity, is intensely developed due to rapid development of piezoceramic transformers in ultrasonics, radioelectronics, measuring and computer engineering. This direction of science, based on the use of deﬁnite physical properties of natural crystals as well as artiﬁcial ceramics (that have undergo certain treatment), studies the mechanics of coupled electric and mechanical ﬁelds in the corresponding elements of constructions. After the discovery of a piezoeﬀect by Jack and Pier Curie and the classical treatise by W. Voigt [250] the theory of electroelasticity was systematically developed in works [25, 75, 122, 125, 135, 161], and [228]. Further development of the mechanics of coupled electrical and elastic ﬁelds in piezoelectric media is connected with the statement of boundary problems (of electroelasticity) and elaboration of the methods for their solution that are contained in works [6, 11, 12, 21, 23, 26, 27, 29, 39, 55, 59, 83, 85, 86, 92, 93, 94, 95, 96, 101, 102, 110, 115, 139, 142, 149, 152, 156, 163, 169, 170, 171, 190, 192, 199, 204, 207, 209, 222, 229, 230, 231, 232, 234, 235, 236, 241, 242, 254, 255, 256, 257, 258, 259, 260]. The fact that the linear equations of state for preliminarily polarized piezoceramics similar form with the corresponding relations for crystals with hexagonal symmetry allows us to formalize the statement of fundamental boundary problems in the same framework. Over the past years a large body of work, in the ﬁeld of statistic and dynamic problems of electroelasticity are gathered in the literature. The results are the outcome of the work of scientists of various disciplines. The coupling of mechanical with electrical ﬁelds and anisotropy causes additional diﬃculties into the analysis of the boundary problems of electroelasticity. The order of the diﬀerential equations for the ﬁeld quantities increases, and the fact that the mechanical and electric boundary conditions are not usually separable forces us to consider the complex boundary problems of the mathematical physics. The two-dimensional static problems of electroelasticity for plane and antiplane deformation of bodies are much easier to analyze, as well as the

2

Introduction

problem of bending a plate. The use of complex variables for the twodimensional problems of electroelasticity are reduces them to the corresponding boundary problems of the theory of analytical functions. The mechanical and electric ﬁeld quantities are expressed for piezoceramics, for example, by three analytical functions with complex variables. Such variants of the complex representations are suggested by various authors in works [40, 59, 86]. Based on their results we considered many statical problems for piecewise-homogeneous piezoceramic bodies. So, in [85] on the basis of methods, developed in [86] the stress concentration was studied on the contour of an elliptic hole in a halfplane under the inﬂuence of a point electric charge on its boundary. The boundary problem of fracture mechanics for a linear crack located on the boundary between a piezoelectric and a conductive medium is solved in [93]. In monograph [59] fundamental static problems of electroelasticity for a piezoceramic plane and halfplane are examined, and also Green’s functions for an inﬁnite plate weakened by a linear crack or a rigid linear inclusion are constructed; the problem of averaging the electroelastic properties of piecewisehomogeneous piezoceramic structures is also considered using the method of integral equations. While considering the boundary problems of electroelasticity for bodies with cracks, which in the non-deformed state are associated with mathematical cuts, the most important factor is the correct statement of the electric boundary conditions on the surfaces of the cracks. This problem is discussed in reports [152, 242]. The study of coupled mechanical and electric ﬁelds in composite plates consisting of two heterogeneous piezoceramic halfplanes, when on the common boundary a linear crack exists is of major importance. Green’s function of the corresponding two-dimensional problems of electroelasticity for the case, when an crack exists on the interphase boundary, is constructed in [178]. It was observed that, similarly with the classical elasticity theory, in the vicinity of the crack tip appears a power singularity [157, 200]. Review of the investigations of interphase cracks are given in [67], a set of results in this ﬁeld is obtained in [76, 90, 93, 157]. An energy criterion of fracture for a piezoelectric body with a crack is constructed in [93, 94]. The criterion of fracture for an electroelastic body initiated by the concentration of the electric ﬁeld on the edges of the electrodes is suggested in [14]. On the basis of electromechanic analogy, relations of fracture mechanics with respect to the electric breakdown of a dielectric are used. They obtained the relation from which it follows that in case of electromechanic fracture of an electroelastic dielectric the surface energy consists of mechanical and electric components, each of which contains a criterion of fracture of the elastic medium and a criterion of an electric breakdown for a dielectric. Devices using the Rayleigh surface acoustic waves (SAW) have practical application in various ﬁelds of acoustoelectronics; in order to excite these

Introduction

3

waves we must place a ﬁnite number of electrodes on the crystal surface, the location of which and their potential may vary widely. In [12] a general method of calculations for the devices is presented, based on the use of Green’s function, the construction of which, for coupled problems of electroelasticity, is a separate and complicated task. Similar methods were used in works [26, 27, 54, 55, 56], and some additional assumptions were also introduced, which allowed for simpliﬁcation of the obtained integral equations. In [68] the problem of excitation of Rayleigh SAW by the ﬁnite system of electrodes is solved based on the assumption that on the electrodes the charge densities are prescribed, which are determined by the solution of the electrostatic problem for the case of a periodical system of electrodes. Review of the solution methods for the problems of SAW excitation in piezoelectrics is given in [220]. Assuming that electrodes are weightless and have negligible rigidity, we considered many static and dynamic boundary problems of electroelasticity for piezoelectrics with surface electrodes. The cases when the position of the electrodes on the surface of the body has either periodical (inﬁnite number of electrodes) or symmetric character were studied, which allowed us to use the eﬀective, in such cases, methods of series and integral transformation to solve the problem. If we need to investigate an electroelastic ﬁeld in a body, excited by an arbitrary system of electrodes, the usage of the above mentioned methods has diﬃculties of mathematical character. However, such investigations are of importance for practical applications. The approach to the investigation of two-dimensional physical ﬁelds in a piezoceramic cylinder excited by an arbitrary system of electrodes (the approach is based on the method of integral equations) is given in [175]. Many actual scientiﬁc and technical problems are connected with the investigation of the process of wave propagation of distribution of the waves in piezoelectric media and the determination of dynamic stress intensity factor near the heterogeneities of various types. Solution of the appearing in this case complex problems requires the use of modern mathematical means and, in particular, the methods and approaches of the dynamic theory of elasticity. The development of these methods is reﬂected in monographs reviews and reports, which appeared the last decades [3, 4, 5, 6, 8, 9, 10, 30, 34, 38, 44, 45, 46, 49, 61, 62, 63, 64, 65, 68, 79, 80, 81, 82, 87, 97, 98, 99, 100, 105, 112, 113, 114, 116, 117, 119, 123, 134, 136, 137, 138, 143, 144, 147, 150, 151, 153, 154, 158, 159, 160, 162, 164, 173, 194, 195, 196, 201, 237, 238, 241, 247, 251, 252]. It is necessary to describe the work of a piezotransducer, which exists in an elastic medium, when analyzing the dynamic stress intensity factor of a piecewise-homogeneous piezoceramic body. Consequently, it is of great importance to study the problems of diﬀraction of electroelastic waves on heterogeneities such as cracks, openings or heterogeneous inclusions. In the vicinity of such heterogeneities large gradients of mechanical and electric ﬁeld quantities exist, which usually cause concentration of mechanical stresses and an increased value of the electric ﬁeld. The eﬀect of coupling of electroacoustical

4

Introduction

ﬁelds appears more clearly in zones near the vicinity of the peak of excitation frequency. From the theoretical point of view the crack may be modeled as a mathematical cut on the sides of which a displacement jump appears. If the displacements jumps are not known beforehand, an accurate mathematical description of the wave ﬁeld, appearing because of the existence of crack, is extremely diﬃcult. Most investigations which can be found in the scientiﬁc literature refer to problems of diﬀraction of elastic waves on linear ﬁnite or half-inﬁnite cuts. However, in reality a crack may diﬀer from a linear one, and as the investigations show, the curvature of the defect may substantially inﬂuence the behavior of the stress intensity factor. The characteristics of the fracture also depend on the proximity of the body boundary to the fracture source, because besides the running wave, the source is aﬀected by a reﬂected, from the body boundary, wave. The wave process in the bounded medium is characterized by reciprocal transformation of the waves due to the boundary type. Therefore, it is necessary to have algorithms allowing evaluation of the inﬂuence not only of the curvature of the defect but also of the body boundary on the stress intensity factors. A larger group of diﬀraction problems of the classical elasticity and electroelasticity is considered for steady and harmonic waves. Here, owing to the separation of exponential multiplier e−iωt the time is excluded and this allows us to solve the problem only with respect to the unknown complex amplitudes. But even in this case the solution of the dynamic problems requires the usage of coarse mathematics and the known analytical solutions in the literature are rather few. Therefore it is actual, while investigating the diﬀraction and propagation of waves in piecewise-homogeneous piezoelectric bodies not only to obtain the analytical mathematical solution but also to develop methods permitting investigation of the dynamic stress intensity factor of the body in the vicinity of a heterogeneity, as well as inﬂuence of the coupling of physical ﬁelds, and the characteristics of the ﬁeld in a distance from the singularity. The investigation of the diﬀraction of elastic waves on the cuts was initiated by the work of Sommerfeld [69] where the optical problem of wave diﬀraction on a screen was studied (mathematically equivalent to the stationary dynamic problem of the theory of elasticity of a half-inﬁnite crack of a longitudinal shear). Maue [226, 227] gave the solution of this problem for a case of a plane deformation. The oscillations of the plane with a half-inﬁnite cut were also investigated in [261, 262]. The diﬀraction problems of electromagnetic waves were studied by many authors, for example, in [31, 72, 127, 128, 129, 130, 131, 197, 198]. The inﬂuence of dynamic eﬀects on the increase of hazard of brittle fracture may be evaluated by an example of the problem of interaction of elastic waves with cracks-cuts of ﬁnite sizes. In this case, as the investigations show, the angular distribution of the stress ﬁeld in the vicinity of the tip coincides

Introduction

5

with the corresponding distribution at static loading. This stress ﬁeld √ is singular, and the main term in the vicinity of the tip has the form Kf (θ) / 2πr, where r is the distance to the tip of the crack, and K is the corresponding stress intensity factor (SIF). Quantity K under the dynamic loading depends on the time. If the body is under the conditions of a stationary wave process (harmonic oscillations), the amplitude of factor K depends on circular frequency ω, and there is a large frequency interval where the amplitude may considerably exceed its static analogue [196, 238]. When solving the diﬀraction problems for canonical regions we usually use the method of separation of variables. References concerning these results may be found in [30, 62, 63, 115]. The development of this method, connected with the passing to multicoupled regions, with variation of the surface form, is given in works [64, 65]. In reports [1, 2, 110] the problems of diﬀraction of elastic waves of shear and compression are considered on a circular piezoelectric cylinder, and also the diﬀraction of a shear wave on a piezo-semiconductive cylinder with hexagonal class of symmetry 6mm. The problem of diﬀraction of a shear wave on a linear cut in an inﬁnite piezoelectric medium with hexagonal symmetry is studied in [139]. As well as in the analogous problem of the theory of elasticity [32], the solution is constructed in an elliptic system of coordinates using Mathieu functions. As the result of the solution of the problem formulas for the stress intensity factors at the tips of the cuts are obtained. In monograph [115] the applied theories of deformation of piezoceramic plates and shells are constructed, the correct statement of the boundary problems of electroelasticity is discussed, the energetic theory of electromechanical transformation is developed, and the solutions of a series of boundary space problems for canonical bodies are obtained. A lot of works of this cycle are devoted to the investigation of wave processes in piezoceramic bodies, plates and shells at diﬀerent directions of the preliminary polarization. Various results in the ﬁeld of the problem of oscillation of piezoceramic bodies are presented in [199]. The appearance of powerful computers allowed passing from formal mathematical solutions of boundary problems to constructive procedures of bringing the solution to ﬁnal results. As a rule, these methods represent a combination of analytical approaches (integral transformations, separation of variables, integral representations, etc.), which give possibility to bring the problem to integral equations and numerical methods for their approximate solution. In [238] the problem of dispersion of P – and SV – elastic waves is considered, using Fourier integral transform over the transverse to the front crack coordinate. Similar procedures are used in work [241]. The stationary dynamic problems for cuts crossing the boundary of the half-space or approaching it are considered in reports [202, 203, 220, 241]. Solving the direct problems of diﬀraction of elastic waves on curvilinear cuts there speciﬁc diﬃculties appear. At the same time, the investigation of such problems are also actual because the characteristics of fracture

6

Introduction

considerably depends on the conﬁguration of the defects, and also due to the necessity of solution of inverse problems, permitting us to determine the changes of the geometric parameters of the defect as a function of the characteristics of the remote ﬁeld. The problem of identiﬁcation of the defects was considered, for example, in [203]. Development of the methods of the potentials theory in the problems of the mathematical physics, electrodynamics and elasticity brought to the design of a rather powerful and eﬃcient approach usually called the method of boundary integral equations (MBI). It is based on the representation of the inner ﬁeld quantities by integrals over the boundary areas which are the convolutions of some “densities” with deﬁnite diﬀerential operators that are functions of the fundamental solutions of the corresponding equations. The densities in the integral representations of the solutions make sense only in the boundary area, and therefore the problem of their determination has one less dimension than the initial boundary problem. Substitution of the limiting values of the solutions, into the boundary conditions brings to the boundary integral equations with respect to the sought-for densities. The latter are solved numerically. The important fact, when considering the problems of diﬀraction of elastic waves on the linear heterogenities of crack or rigid inclusion types, is the construction of the integral representations for the solutions, in a way that they should provide the existence of the jump of the displacement vector (or stress) on the front of the defect. Solving the diﬀraction problem under more complex boundary conditions these representations should have the necessary completeness. On the interphase (or on the line of the crack) certain components of the coupled ﬁelds have discontinuities, while others cross it continuously. Therefore the integral representations of the solutions of the boundary problem should be correct, i.e. they can satisfy these conditions of coupling and also deﬁnite behaviour of the solutions at inﬁnity. There are several similar approaches to the construction of integral representations of discontinuous solutions of the equations of elasticity and of equations and systems of elliptic type in general. They are: the procedure of the distortion method, potential representations, representations of solutions in the form of generalized integrals of Cauchy type, etc. More usual in these types of problems is the method of the theory of generalized functions. The mathematical problems of the boundary integral equations method for the solution of the stationary dynamic problem of the theory of elasticity is developed in the works of V.D. Kupradze and his colleagues [97, 98, 99, 100]. Some useful modiﬁcations of the method of the boundary integral equations are given in the works [33, 88]. Recently there has been rapid development in the ﬁeld of magnetoelasticity; its connected with the fact that the theory is applicable in various ﬁelds such as geophysics (propagation of elastic waves) under the inﬂuence of magnetic ﬁeld, acoustics (fast damping of acoustic waves when being inside

Introduction

7

a strong magnetic ﬁeld), technology and embiomechanics. We see that the problem of the interaction of the electromagnetic ﬁelds on conductive media that are deformed due to the action of electromagnetic forces has been under systematic research for the last 30 years. Up to date we may point out some evolvement in the ﬁeld of magnetoelasticity such as: a) The deformable body is under the inﬂuence of a strong and static magnetic ﬁeld; the interaction of the stress ﬁeld with the electromagnetic ﬁeld is done through Lorentz forces. These forces are included in the motion equations and the generalized Ohm’s Law for the particle that moves within the magnetic ﬁeld. The state equations are described through a non-linear system of coupled equations of electrodynamics and the movement of the elastic medium. This system may be linearized under the assumption that the disturbed electromagnetic ﬁeld that is produced due to the mechanical action can be ignored. This model of magnetoelasticity does not consider the magnetic or electrical polarization. The before mentioned process is eﬀective for the formulation of the magnetoelasticity problems for thin shells and plates under the inﬂuence of steady magnetic ﬁeld. b) The magnetoelastic interaction of ferromagnetic media is studied taking into account the magnetization that appears due to the presence of an external magnetic ﬁeld. We have to comment here that in the study of the interaction between elastic and magnetic ﬁeld on ferromagnetic media results to ana extremely diﬃcult problem of linearization of the state equations, for soft ferromagnetics. These materials have broad application in modern technology, thus the study of such phenomena is of great theoretical and practical importance. c) Solving problems of magnetoelasticity for the body with cracks that are under the inﬂuence of an electromagnetic ﬁeld. The study of the interaction between the electromagnetic ﬁeld with the elastic cracked body depends on the properties of the medium. For a conductive elastic body, that can be magnetized and is under the inﬂuence of a stationary magnetic ﬁeld, the study of stress-strain state at the tip of the crack is possible through the linear equations of magnetoelasticity. One axis of this monograph is the treatment of a series of actual problems of magnetoelasticity for multiply connected bodies. The problems of optimal (in any sense) control of the characteristics of strength and fracture of piecewise-homogeneous bodies, where physical ﬁelds of various type are coupled with each other, are a new class of problems appearing in the process of development of modern technologies. In many cases the parameters regulating the fracture of a piezoelement are in the form of functionals that are determined by the solutions of integral equations for the corresponding primal problem, fact that considerably simpliﬁes the solution of inverse (optimizing) problems. The methods of the theory of optimal control

8

Introduction

of the systems with concentrated and distributed parameters are considered, for example, in [223, 36, and 107]. The mathematical aspects of the problem of moments was considered in [239], and in particular the -problem of moments was developed in [89], while solutions of optimal control problems were studied in [107]. In [60] some optimal problems of the theory of elasticity are stated as well as the methods of bringing the given problems to the general problems of moments in the space of continuous functions. Using the approximation of non-standard moment functions by polynomials the general problems of moments are reduced to the classical exponential problems of moments or -problems of moments [7, 89]. Some problems connected with the control of SIF on the boundary of a piezoceramic halfspace with cracks (and also with their movement) in elastic plates, are considered in [174, 179]. According to the character of the optimal problem, the control should be chosen from a certain functional class. The literature on diﬀraction of electroelastic waves on heterogeneous types of cracks, openings, inclusions in piezoelectric media is rather scanty. This is explained by the complexity of the dynamic problem of electroelasticity and mathematical diﬃculties arising during the process for their solution. The present monograph, which to some extent ﬁlls in the indicated gaps in the scientiﬁc literature, presents an approach, based on to the solution of two-dimensional static and dynamic problems of electroelasticity and to the construction on that bases structural procedures for investigation of coupled electric ﬁelds in piecewise-homogeneous piezoceramic bodies. The developed approach contains the following principal parts: the construction of the fundamental solutions of the corresponding equations of electroelasticity, the derivation of the integral representations of the boundary problems solutions; the reduction of the latter to the system of singular or regular integral equations; and an approximate numerical solution of the obtained equations. In some particular cases, from the constructed analytical algorithms follow the solutions of the corresponding boundary problems of the theory of elasticity for piecewise-homogeneous bodies.

1 Physical Fields in Solid Bodies

1.1 Heat Field. Heat Conduction Equation in Solid Bodies 1.1.1 Heat Field One of the central properties of physical bodies is temperature, a concept closely related to that of heat equilibrium. Our ability to quantitatively measure the temperature using a thermometer is based on the establishement of an equilibrium state in the bodies of reference. If such a equilibrium has not been established then the temperature cannot be deﬁned for a body of ﬁnite size. However, the mathematical simulation of real physical processes with the aid of modern thermodynamics, is based on the concept of ﬁnite body V ; the later is deﬁned as a collection of material particles (assempled by material points P = (x1 , x2 , x3 )) of negligible representive volume ΔV ), that during a small interval of time Δt their state is considered to be in equilibrium having a deﬁnite value of temperature given by T = T (P, t) = T (x1 , x2 , x3 , t)

(1.1)

The above scalar function is used to determine the temperature ﬁeld in the volume V . 1.1.2 Equilibrium Heat Equation The transfer of heat within an irregularly heated solid body from one part of the body to another is carried out by heat conduction. For its quantitative → → description we use the vector of heat ﬂow − q = − q (P, t), by which we may express, heat quantity ΔQ1 that ﬂows during time Δt through an element ΔΣ lying on the body surface (Fig. 1.1) as → → ΔQ1 = q (n) ΔΣΔt = − q ·− n ΔΣΔt

(1.2)

10

1 Physical Fields in Solid Bodies

where q (n) is the normal component of the heat ﬂow along the normal to the → surface − n (Fig. 1.1). Consider now an arbitrary volume V within the body bounded by the closed surface Σ. With the help of relation (1.2) we may express Q1 -the heat ﬂowing into volume V through surface Σ during time Δt as → → q ·− n ΔtdΣ (1.3) Q1 = − − Σ

→ The minus sign reﬂects the fact that − n is pointing outwards the surface. If there is a heat sourse inside volume V (e.g. due to the interaction of an electromagnetic ﬁeld with the medium), Q2 -the heat quantity released in volume V per time Δt, is given by W ΔtdV (1.4) Q2 = V

W = W (P, t) denotes the heat quantity released per unit time and volume. The sum of Q1 , Q2 i.e., Q1 + Q2 in V actually causes a change in the temperature: Accuming the speciﬁc heat capacity and density being functions of pressure, i.e. c = c (P ) and ρ = ρ (P ), the heat ΔQ3 which changes the temperature of an element of ΔV volume for a inﬁtesimely ΔT ≈ ∂T ∂t Δt reads: ΔQ3 = cρ

∂T Δt, ∂t

The above expression can be also written in the integral form as ∂T Q3 = ΔtdV cρ ∂t

(1.5)

V

Fig. 1.1. Calculation of the heat ﬂow passing through surface Σ of an unevenly heated body

1.1 Heat Field. Heat Conduction Equation in Solid Bodies

Applying the Gauss-Ostogradsky theorem to (1.3) we get → Q1 = − div − q ΔtdV

11

(1.6)

V

Using (1.4)–(1.6) the heat balance Q3 = Q1 + Q2 , now reads ∂T → − + div q − W ΔtdV = 0 cρ ∂t

(1.7)

V

But, since V is an arbitrary chosen volume (1.7) is satisﬁed when cρ

∂T → = −div− q + W, ∂t

(1.8)

The above equation is the diﬀerential form of the heat balance. 1.1.3 Heat Conduction Equation For an isotropic body the heat conduction is determined by − → q = −λgradT

(1.9)

(known as Fourier’s law of heat conduction) In the above equation, λ = λ (P ) > 0 is the heat conduction coeﬃcient and the minus sign reﬂects the fact, that at a point P the heat ﬂows in the direction of decreasing temperature (what exactly the vector grad T indicates). Combining relations (1.8) and (1.9) we obtain the heat conduction equation for a heterogeneous isotropic body cρ

∂T = div (λgradT ) + W ∂t

(1.10)

If the body is homogeneous, then c, ρ and λ are constants and (1.10) reads

∂T = a2 ΔT + w (P, t) ∂t

(1.11)

λ 1 W (P, t), and Δ is the Laplase operator , w (P, t) = cρ where a = cρ Δ = ∂ 2 /(∂xi ∂xi ) . The parameter λ (1.12) k= cρ is the so-called temperature conductivity coeﬃcient. → For anisotropic bodies, such as crystals, the ﬂow direction of heat − q, in thegeneral case, does not coincide with the temperature gradient. Hence,

12

1 Physical Fields in Solid Bodies

instead of formula (1.9) a more general relation is the: − → q = −λgradT

(1.13)

qi = −λij T,j

(1.14)

or in a suﬃx notation: λ or λij is called the thermal conductivity tensor (a second rank tensor) heat conduction tensor (or tensor of the heat conduction). Each of tensor components λij has a deﬁnite physical meaning. For example, if the unit gradient of temperature points in the direction of Ox2 axis (gradT = {0, 1, 0}), the heat → ﬂow − q = {−λ12 , −λ22 , −λ32 } has a component −λ22 along that axis, and also two transverse components, namely −λ12 along Ox1 axis and λ32 along Ox3 axis. In most of the cases, due to properties associated with statistical physics the conductivity tensor is symmetric, i.e. λij = λji .

(1.15)

An asymmetry of tensor λij would signify that the heat from a point source would ﬂow on a plate along untwisting spirals. During last century scientists intensively tried to discover the spiral propagation of the heat, but all these attempts gave negative results. Equally with tensor λij we often use tensor kij =

λij , ρc

(1.16)

this is called the temperature conduction tensor. In the principal axes coordinate system the only non-zero components are the diagonal λi = λii (i = 1, 2, 3) (no summation over i here). In this coordinate system the law of heat conduction (1.14) is given by − → q = {−λ1 T,1 ; −λ2 T,2 ; −λ3 T,3 }

(1.17)

and the heat ﬂows in the direction of the principal axes. The directions of the principal axes of a crystal are associated with its symmetry. By substituting (1.14) into (1.10) the equation of heat conduction for homogeneous crystals reads ∂T = kij T,ij + w (P, t) ∂t

(1.18)

1.1.4 Boundary Conditions To solve the above set of (1.10), (1.11) or (1.18) we need to specify the temperature ﬁeld inside the body at an initial time t = t0 T = T0 (P, t0 ) = T0 (x1 , x2 , x3 , t0 )

(1.19)

1.2 Electromagnetic Fields. Maxwell’s Equations

13

(the initial condition) and the heat ﬂowing at the boundary Σ (boundary or edge conditions). Depending on the problem formulation one can impose diﬀerent kind of boundary conditions: if, for example, over the surface of the body ﬂows a liquid of known temperature T(P,t) then the BC may read: T (P, t) = T∗ (P, t)

(P ∈ Σ)

(1.20)

(these are boundary conditions of the ﬁrst kind). Another type of BC are the so-called boundary conditions of the second kind where, for example, the value of the normal component of outer main (n) → ﬂow − q ∗ is given (case q∗ = 0 is called the condition of heat insulation). In that case the B.C. read: (n)

q (n) (P, t) = −q∗ (P, t)

(P ∈ Σ, n is the external normal)

(1.21)

Other conditions of heat exchange could also be imposed. For example, when there is convective or radiant heat exchange on the surface, in the balance of heat ﬂows on the boundary of the body (1.21) we will have terms, depending on the temperature values of the body and environment. Here we should note that in the general case, where the edge conditions of diﬀerent kind are prescribed on various parts of the boundary, we have to solve the mixed problem of heat conduction. Equations of heat conduction are of parabolic type, the characteristic properties of which are the facts, that they predict an inﬁnite speed of propagation of the disturbances. Theoretically that means that at an abrupt change in the temperature at any point will cause the immediate change in the temperature at every point. Immediate changes in temperature at a distance from the heating point (sourse) are practically insigniﬁcant a fact which is in agreement with the established theory.

1.2 Electromagnetic Fields. Maxwell’s Equations 1.2.1 The Laws of Electrodynamics in Integral Forms Maxwell’s equations describe the behaviour of electromagnetic ﬁelds as they interact with matter. They represent the principal laws of electromagnetism and one can say that they play a similar role as Newton’s laws in mechanics. The ﬁrst pair of Maxwell’s equations contains the equation of Faraday’s law of electromagnetic induction and the equation of Gauss law for closed force lines of an electromagnetic ﬁeld. Faraday’s Law Faraday’s Law reads: L

− − → E · d→ r =−

S

→ − ∂B − ·→ n dS ∂t

(1.22)

14

1 Physical Fields in Solid Bodies

The above equation links the velocity of changes of the magnetic induction → − ﬂow B through surface S with an electromotive force, which is expressed → − as the circulation of electric ﬁeld E along a closed loop contour L, + and the boundary surface S (Fig. 1.2). The direction of tracing the contour L in formula (1.22) is positive as described in Fig. 1.2. Gauss’s law Gauss’s Law reads:

→ → − B ·− n dΣ = 0

(1.23)

Σ

The above equation expresses the equality to zero of the vector of magnetic → − induction B in a volume V bounded by closed surface Σ (Fig. 1.3). This law demonstates the absence of a magnetic ﬁeld when magnetic charges or currents that act as sources of a ﬁeld don’t exist. The lines of forces of the magnetic ﬁeld due to (1.23) are closed or inﬁnite (i.e. are closed across an inﬁnitely distant point of space). The second pair of Maxwell’s equations contains the equation suggested by Maxwell, given by: →

− → − − → ∂D − − → ·→ n dS, (1.24) j + Hd r = ∂t L

S

→ − The above equation connects the ﬂow of conduction current density vector j → − D across surface S with the integral of vector and the displacement current ∂∂t → − H on the closed contour L (Fig. 1.2). Besides (1.24) to the second pair of Maxwell’s equations we refer the equation of the theorem of Gauss for an electric ﬁeld inside a material → − − → ρe dV (1.25) D · n dΣ = Σ

V

→ − This equation connects the ﬂow of the electric displacement vector D from closed surface Σ with the enclosed (by the surface) free electric charge (Fig. 1.3), while ρe is the volume density of free electric charges. Equa→ − tion (1.25) shows that the ﬁeld lines of vector D may start and end on electric charges.

Fig. 1.2. About choice of a positive direction on the contour of integration L

1.2 Electromagnetic Fields. Maxwell’s Equations

15

Fig. 1.3. Calculation of the vector ﬂow from arean V bounded by closed surface Σ

1.2.2 Maxwell’s Equations in Diﬀerential Forms Using Gauss-Ostrogradsky theorem, Maxwell’s (1.22)–(1.25) can be also → − − → − → − → expressed in in diﬀerential form, connecting the vectors E , D, H , B and their time derivatives at any point in space. Applying Stock’s theorem to (1.22) we obtain, for arbitrary surface S with → unity normal − n , that → − → − − ∂B − → ·→ n dS rot E · n dS = − ∂t S

or,

S

→

− → ∂B − → ·− n dS = 0 rot E + ∂t S

The equality is valid only when the integrand function is equal to zero at any point of space. The second Maxwell’s equation of Maxwell in diﬀerential form reads: → − → − ∂B rot E = − ∂t Applying Stocks theorem to (1.24) we obtain by analogy that → − → − − → ∂D rot H = j + ∂t Using Gauss-Ostrogradsky theorem in (1.25) we transform the surface integral into a volumic one: → − div DdV = pe dV. V

V

For an arbitrary volume V , the above equality is satisﬁed only if the integrand functions at every point in space are equal: → − div D = ρe

16

1 Physical Fields in Solid Bodies

Making use of the Gauss-Ostrogradsky theorem in (1.23) we get: → − div B = 0 Hence, the diﬀerential form of Maxwell’s equations is given by the following set of equations: First pair of equations: → − → − ∂B , rot E = − ∂t → − div B = 0,

(1.26) (1.27)

Second pair of equations: → − − → → ∂D − rot H = j + , ∂t → − div D = ρe ,

(1.28) (1.29)

If we multiply with del (1.28) and take into account (1.29) together with identity → − div[rot H ] = 0 as a consequence of the second pair of Maxwell’s equation we will come to the known equation of continuity of the electric charge → ∂ ρe − divj + =0 ∂t

(1.30)

The system of Maxwell’s equations is completed by relations determining → − − → the vector of electric polarization P and vector of magnetization M . For a solid body we have − → − − → → D =0 E + P − → − → → − B = μ0 H + M

(1.31) (1.32)

−12 constant = 8, 854 · 10 F/m , and μ0 is the maghere 0 is the electric 0 −7 netic constant μ0 = 12, 566 · 10 H/m . → − In physics it is acceptable to consider vector H as an axial vector, deter→ − mining its direction to the direction of the polar vector of current j according to the right-hand screw rule. With this choice Maxwell’s equations are satis→ − − → − → → − − → − → − → ﬁed if we get the vectors H , B , M to be axial, and the vectors E , D, P , j to be polar. (At this point we should mention that Maxwell’s equations could be satisﬁed by the opposite method of determination of the vectors.

1.2 Electromagnetic Fields. Maxwell’s Equations

17

1.2.3 Magnetization − → In many isotropic (not ferromagnetic) media, magnetization M is directly → − proportional to the ﬁeld strength H : − → → − M = μ0 ψ H (1.33) where ψ is a dimensionless constant called the magnetic susceptibility. If ψ > 0, the medium is called paramagnetic; if ψ < 0 the medium is diamagnetic. Combining (1.32) and (1.33) we obtain → − → − → − → − (1.34) B = μ0 (1 + ψ) H = μ0 μ H = μa H where, the dimensional constant μa is the absolute magnetic permeability of the medium, and the dimensionless constant μ = 1+ψ is the relative magnetic permeability. → − − → − → In the general case of anisotropic crystals, the vectors B , H and M are not parallel, and are deﬁned by the followin relations that are analogous with (1.33) and (1.34), Mi = μ0 ψij Hj

(1.35)

Bi = μij Hi

(1.36)

In the above equations ψij is the tensor of magnetic susceptibility and μij = μ0 (δij + ψij ) is the tensor of magnetic permeability. The tensor Mij = δij + ψij , which is the tensor of relative magnetic permeability of a crystal is also commonly used. From the expression giving the energy density of a magnetic ﬁeld: → − → 1 1− wm = B · H = μij Hi Hj (1.37) 2 2 it follows that the tensors of the magnetic permeability μij and Mij respectively, as well that of magnetic susceptibility are symmetric. These may be → − transformed to main axes, and if the ﬁeld H is directed along one of them, − → → − then the vectors M and B are also directed along the same axis. The magnetic susceptibility of the crystal is completely deﬁned by the principal values of the susceptibilities ψ1 , ψ2 , ψ3 along the main axes. A crystal is called paramagnetic or diamagnetic along a given main axis, if the principal value of susceptibility along it is positive or negative, respectively. Here we should also note that some crystals are paramagnetic along one axis and diamagnetic along another. As the principal susceptibilities of paramagnetic and diamagnetic crystals are usually less than a unity ∼ 10−5 , the ﬁeld created by magnetized crystals is smaller in comparison with the outer ﬁeld, and it may be neglected. The situation is quite diﬀerent in the case of ferromagnetics, where the quantity of magnetic permeability is very high (e.g. μ = 5000 for iron). But in ferromagnetics the magnetic permeability is not constant and strongly dependent → − on the amplitude and the direction of the magnetic ﬁeld H .

18

1 Physical Fields in Solid Bodies

1.2.4 Electric Polarization → − For isotropic media the connection between vectors of electric ﬁeld E , → − → − polarization P and electric displacement D are analogous to the connection → − − → → − between vectors H , M and B as follows: − → − → P =0 χ E → − → − → − → − D =0 (1 + χ) E = κ E =0 K E

(1.38) (1.39)

where χ is the electric susceptibility, κ is the dielectric permeability and K = 1 + χ is the dielectric constant. For anisotropic crystals instead of (1.38) and (1.39) the following set is used: Pi =0 χij Ej ,

(1.40)

where χij is the tensor of dielectric susceptibility, and Di = κij Ej ,

(1.41)

where κij =0 (δij + χij ) is the tensor of dielectric permeability. In terms of the expression of the energy density of the electric ﬁeld we =

→ − → 1 1− D · E = kij Ei Ej 2 2

(1.42)

we derive the symmetry of tensors kij and χij and thus, we can map them to the main axes. Polarization and magnetization phenomena have an obvious analogy in their description. The electric ﬁeld is created by the availability of electric charges, and the magnetic ﬁeld by their movement. We will not examine practically basic eﬀects such as the depolarization of a dielectric body. Here we should note that unlike the magnetic susceptibilities, the principal dielectric susceptibilities are always positive (the above are true under the assumption that we don’t have depolarization of the electric ﬁeld in a dielectric, and leakage of charges due to the presence of conduction). Besides, their values are larger than unity (for example, for chloride of sodium they are quantities of order 5,6. Dielectric and magnetic constants of the crystal are subjected to several constraints imposed by the symmetry of the crystal. This problem will be considered in the next chapter which is dedicated to crystal physics. 1.2.5 The Balance Equation of the Electromagnetic Field’s Energy. Umov-Poynting Vector Consider a region V bounded by a closed surface Σ. Let the electromagnetic ﬁeld described by Maxwell’s (1.26)–(1.29). In the general case electric currents

1.2 Electromagnetic Fields. Maxwell’s Equations

19

ﬂow in the body, and due to Joule’s law, the heat energy with speciﬁc power that is being released is given by: → → − − (1.43) wJ = j · E → − → − Let us now multiply (1.28) by E , and (1.26) by H , subtract the second equation from the ﬁrst and integrate the result over volume V , taking as result:

→ − → − → ∂B − → → ∂D − − → − → − − → → − → − +H · + j · E dV E· E · rot H − H · rot E dV = ∂t ∂t V

V

In order to transform the obtained expressions we use the known identity from the vector analysis − → − → − − → → − → − → E · rot H − H · rot E = −div E × H (1.44) (the reader should try to derive the above expression as a homework), and then apply the Gauss-Ostrogradsky theorem: − → − → → − − → → div E × H dV = E × H ·− n dΣ (1.45) V

Σ

− where → n is the unit normal vector to the surface. By applying the above transformations, we get:

→ − → − → ∂B − → → ∂D − − → − − → − → +H· + j · E dV, E· − S · n dΣ = ∂t ∂t Σ

(1.46)

V

where we have introduced the vector: → − − → − → S = E ×H

(1.47)

which is called Umov-Poynting vector. Equation (1.46), which is direct mathematical consequence of Maxwell’s equations, may be interpreted as a balance equation of the electromagnetic energy. Indeed, the ﬁrst two summands of the ﬁrst side give the velocity of changes of the energy density of the magnetic ﬁeld at a given point within volume V : → − → − → ∂B ∂ → ∂D − − +H· = (we + wM ) E· (1.48) ∂t ∂t ∂t (which is not diﬃcult to derive directly with the help of expressions (1.37) and (1.42)). The last term is the density of Joule heat (1.43), i.e. the rate at which heat energy is supplied to a particle. The expression on the left side of (1.46) is the ﬂow of Umov-Pointing vector, describing the inﬂow of the electromagnetic energy across surface Σ of the body from the surrounding. A more complete equation of energy balance which takes into account the deformation of the body will be obtained in the later sections of the chapter.

20

1 Physical Fields in Solid Bodies

1.2.6 Vector and Scalar Potentials of Electromagnetic Field For the solution of problems concerning the determination of electromagnetic ﬁelds it is convenient to introduce potentials into the system of Maxwell’s equations. From (1.27) it follows that the solenoid vector of the magnetic → − induction may be represented as a rotor of some vector C → − → − B = rot C (1.49) → − → − However, relation (1.49) does not simply determine vector C over vector B . As for any scalar function ψ we have the identity: rot grad ψ = 0, (may be → − easily checked), we may determine the vector potential A as → − → − → − − → B = rot A , A = C − gradψ (1.50) By substituting (1.49) and (1.50) into (1.26) we get: →

− → ∂A − = 0. rot E + ∂t

(1.51)

Any irrotational vector ﬁeld (1.51) can be described as a function of a potential, i.e. there is available scalar potential ϕ, where → − → ∂A − E+ = −gradϕ. (1.52) ∂t With the help of (1.50) and (1.52) the system of Maxwell’s equations can be writte as follows: → − → − − → ∂D (1.53) rot H = j + ∂t → − div D = ρe (1.54) → − → − B = rot A (1.55) → − → − ∂A (1.56) E = gradϕ − ∂t → − For the calculation of the vector potential A and the scalar potential ϕ we need additional conditions which are called calibration conditions. It is assumed that: → − div A = 0, (1.57) A condition called Coulomb calibration. It is also assumed that the potentials at inﬁnity become zero. For piezoelectrics-non-conductive non-magnetized and electrically neutral bodies the following relations hold: − → → − j = 0, M = 0, ρe = 0

1.2 Electromagnetic Fields. Maxwell’s Equations

21

1.2.7 Boundary Conditions To complete the system of Maxwell’s equations and the deﬁning relations it is necessary to formulate the conditions on the boundary of two diﬀerent media. We will deduce these conditions using Maxwell’s equations in the integral formulation given by (1.22)–(1.25). Consider the elements just below and above the boundary at a distance of ± 12 h at the normal (to the boundary) direction (Fig. 1.4). We will assume → that normal − n is directed from medium “−” to medium “+”, and that means − → → → n+ = − n = −− n−

(1.58)

In (1.23) let us consider the limiting transition at h → 0 while making the → − assumption that B is inﬁnite. The integrals along the side surfaces of the layer disappear and (1.23) turns into −→ −→ − → − → B + · n+ dS + B − · n− dS = 0 (1.59) S

S

→ − where B + and B − designate the limiting values of ﬁeld B at approximation to the interphase from the corresponding side. Due to the arbitrariness of S we will obtain the sought for boundary condition from (1.59) taking into account relation (1.58) −→ −→ → n = 0 or B + = B − , (1.60) B+ − B− · − n

n

designating the continuation of the normal component of vector of magnetic → − induction B on the interphase. The limiting transition condition in (1.25) is → − analogous for the electric displacement D: − →+ − → → D − D− · − (1.61) n = 0 or Dn+ = Dn− , under the assumptions that the volumic integral from ρe at limiting transition disappears, the density of free charges ρe is bounded (and the body is electrically neutral, ρe = 0).

Fig. 1.4. The scheme of integration during the deducing the boundary conditions with the help of the theorem Gauss-Ostrogradsky

22

1 Physical Fields in Solid Bodies

In the case when additional (outside) charges are applied to the material electric neutrality is then disrupted. For example, if a thin surface electrode exists on the interphase, we introduce the concept of surface density of charges determined with the help of relation ρdV = σdS (1.62) im h→0

V

S

When h → 0 (1.25) gives the surface integral of relation (1.62). If we use the plus and minus notation (1.25) will result to →+ − − →− − − → → + − D · n dS + D · n dS = σdS S

S

S

For an electroded surface, due to the arbitraty choise inS, the following boundary condition applies (1.63) Dn+ − Dn− = σ Now lets condider a surface, S crossing the interphase of media (see Fig. 1.5). The other boundary conditions can be derived as follows from Maxwell’s (1.22) and (1.24), if we consider the surface that may be obtained by parallel transition of an element of arc AB lying on the interphase on ± 12 h along the normal to this surface. For h → 0 the surface integrals on the right-hand side of (1.22) and (1.24), disappears if the integrand functions are bounded and if they are not connected to speciﬁc surface currents. Besides, the linear integrals disappear on the regions which are perpendicular to the surface interphase and as a result we get the following relations: →+ − − →− − − → r =0 E ·d r + E · d→ BA AB →+ − − →− − − H · d→ H · d→ r + r =0 AB

BA

Fig. 1.5. The scheme of integration during the deducing of the boundary conditions with the help of the theorem of Stokes

1.2 Electromagnetic Fields. Maxwell’s Equations

23

Changing the direction of integration in the integrals over BA and taking into account the arbitrary choice of AB, we conclude that at every point on the → − → − → surface, the tangential components of vectors E and H (along unit vector − r which is tangential to interphase) remain continuous, i.e.: − → → →+ − τ = 0 or Eτ+ = Eτ− (1.64) E − E− · − + → − → τ = 0 or Hτ+ = Hτ− H − H− · − (1.65) On the outer boundary of the body bounded by vacuum or air we require the same conditions (1.60), 1.61), (1.61), (1.64), (1.65) and in the general case we construct solutions of the problems of electrodynamics for the body and for surrounding connected with these conditions. In the particular case of piezoelectric media, the dielectric permeability of which is of order O(102 ) larger than that of the air, we may use the approximate condition − − → D ·→ n =0

or Dn = 0

(1.66)

on the body surface. 1.2.8 Stationary Electromagnetic Field. Electrostatic Approximation In stationary electromagnetic problems Maxwell’s equations are time independent (no time derivatives) and the equations reduce to the following system of equations (equations of electrostatics) → − rot E = 0 → − div D = ρe

(1.67) (1.68)

while the second pair now reads → − − → rot H = j → − div B = 0

(1.69) (1.70)

The above equations are used to calculate the stationary magnetic ﬁeld of stationary currents, if any. From (1.56) it follows, that the electrostatic ﬁeld is determined by a scalar potential ϕ by → − E = −gradϕ, Ei = −ϕ,i (1.71) Here (1.71) replaces (1.67) in the set of the electrostatic equations. Potential ϕ should be sought for from the equation obtained by substitution (1.71) and determinant (1.41) into (1.68) (κij ϕ,j ),i + ρe = 0.

(1.72)

24

1 Physical Fields in Solid Bodies

This equation is solved together with boundary conditions (1.61), (1.63), (1.64). The last condition, taking into account (1.71) is reduced to the equality ∂ ϕ+ ∂ ϕ− = ∂τ ∂τ which after integration we get the continuation condition of the potential at the interphase (1.73): (1.73) ϕ+ = ϕ− (here, the constant of the integration is omitted as its value does not inﬂuence → − the values of electric ﬁeld E ). In conductors the strength of the electric ﬁeld is equal to zero, which means that on the boundary between a dielectric and a conductor the next relations hold: Eτ = 0,

Dn = σ

(1.74)

With the help of (1.71), (1.73) the ﬁrst of these conditions is reduced to the condition of constant potential ϕ ϕ = V = const,

(1.75)

while the second condition can be used to ﬁnd the distribution of charges on the electrode. Concluding, we should mention that during the design of piezoelectronics devices we have to model the coupled elastic electromagnetic waves, i.e. the elastic waves during their interaction with electric ﬁelds and electromagnetic waves accompanied by the deformation of media. Due to the fact that the value of the velocity of the elastic waves is smaller, by a factor of O(105 ), than the propagation velocity of electromagnetic waves, it is possible to neglect the changes in the magnetic ﬁeld during the investigation of the elastic waves. Hence, in most problems in the design of piezotransducers and the propagation of electroacoustic waves magnetic eﬀects are neglected, while we use the quasistatic approximation for an electric ﬁeld, i.e. the electrostatic (1.67), (1.68) and (1.71).

1.3 Stresses and Deformations. Hooke’s Law 1.3.1 State of Stress The basic forces acting on body are the volumetric (body) forces and the surface ones. To volumetric forces belong, for example, the gravitational, electromagnetic, and inertial forces. These forces are distributed throughout the → − volume and to assign them we use vector F relating to the volume unit so → − − → that the force aﬀecting volume dV is equal to F = F dV .

1.3 Stresses and Deformations. Hooke’s Law

25

Surface forces occur when two or more bodies are in contact. There two kinds of surface forces: the outer surface forces resulting from the surrounding bodies and the inner surface forces resulting from the interaction of various parts within the body. Lets us consider an inﬁnitesimal tetrahedron having its vertex at a given point P and lateral basis located along the axes of coordinates (Fig. 1.6). Let the inﬂuence of the surrounding portions of the body on the inclined → n is equivafaces Q1 , Q2 , Q3 with area dS and unity outer normal − → − → − lent to surface force T n dS, vector T n is called inner stress. The surface forces acting on the lateral faces of the tetrahedron may be designated as → − → − → − → − T 1 dS1 , T 2 dS2 , T dS2 , T 3 dS3 . Here index i denotes the axis perpendicular to a face, and dSi denote the face areas given by the projection of basis dS, i.e. dSi = ni dSi . Employing force balance on the the tetrahedron we get the following equation: − → − → − → − → − → → − (1.76) T n dS − T i dSi − F dV = T n − T i ni dS − F dV = 0 During the contraction of the tetrahedron to point P the resultant of mass forces will tend to zero faster than the resultant of the surface forces, and therefore from (1.76) it follows that the value in brackets should be equal to zero and therefore → − → − T n = T i ni (1.77) The coordinates of vectors Ti are called stress components and are given by → − → e j (ej, j = 1, 2, 3 are the unit vectors of the reference system) T i = σij − (1.78) The stresses σ11 , σ22 , σ33 are called normal stresses and they act along the coordinate axes perpendicular to the faces of an elementary tetrahedron.

Fig. 1.6. Equilibrium of an elementary tetrahedron

26

1 Physical Fields in Solid Bodies

The stress components T12 , T21 , T13 , T31 , T23 , T32 are directed along the tangentials and are called tangential stresses (shear stresses). The signs of the stress components shown in Fig. 1.7 are taken to be positive according to deﬁnition (1.78). From condition (1.78) it also follows that σij forms a second → rank tensor (as its convolution with vectors − e is a vector). 1.3.2 Equations of Equilibrium and Motion. Symmetry of Stress Tensors Let us set up the equations of equilibrium for a ﬁnite volume V bounded by a closed surface Σ. Every volume element dV is aﬀected by the body → force Fj dV − e j , and every element, dS, on its surface is aﬀected by the surface → − force σij ni e j dS. Equlibrium requires that the sum of all the acting forces to be zero, i.e.: Fj dV = 0 (1.79) σij ni dΣ + Σ

V

Using the theorem of Ostrogradsky-Gauss we obtain (σij,i + Fj )dV = 0.

(1.80)

V

Now let us consider the moments of forces acting on the body. The body force → − → − → → e i which is applied at the F dV creates a moment − r × F dV = εikj xk Fj dV − → − → − point with radius-vector r = xk e k . The surface force acting on an element → − → → dS creates a moment − r × T n dS = εikj xk σj nl − e i . Again, equilibrium requires the sum of moments of all the forces acting on the the body to be zero: εikj xk Fj dV = 0 (1.81) εikj xk σj nl dΣ + Σ

V

Applying Gauss- Ostogradsky theorem we get εikj xk σj nl dΣ = (εikj xk σj ),l dV Σ

V (εikj xk,l σj + εikj xk σlj,l ) dV

= V

Using equalities xk, = δk and εikj δk σj = εikj σkj , (1.81) now reads: εikj [σkj + xk (σj, + Fj )] dV = 0 (1.82) V

Assuming continuity of the the integrated functions in (1.80) and (1.82) ar it can be easily shown that, due to the arbitray choice of V : σij,i + Fi = 0

(1.83)

1.3 Stresses and Deformations. Hooke’s Law

27

and εikj σkj = 0

(1.84)

Equations (1.83) represent the equations of equilibrium of a body which is under the inﬂuence of body forces. Conditions (1.84) are reduced to the requirement of the symmetry of stress tensor (the law of twoness of tangential stresses) (1.85) σij = σji Relations (1.85) are deduced by assuming that the interactions of the portions of the body are only due to surface forces. In the case where surface moments exist, the stress tensor becomed asymmetric. Such situation appears when we consider the interaction of a material medium with an electromagnetic ﬁeld. In such interaction they form a single object and during the set up of the mathematical model we have to determine what should be related to the medium and what to the ﬁeld. In practice, although there are known models with asymmetric stress tensor, approximation (1.85) is quite common and we will also use it in what follows. The symmetrical stress tensor may be transformed to the main axes, i.e. three axes perpendicular to each other, where the stress tensor contains only three non-zero components σ1 = σ11 , σ2 = σ22 , σ3 = σ33 , (the main stresses) and the stress state is reduced to the deduction of these three components, which are perpendicular to each other, while the tangential stresses on the faces of the cube (Fig. 1.7) will disappear. Here we should note that the ledt-hand side of equilibrium (1.83) expresses the resultant of outer forces applied to the material particle of the medium. Therefore, according to Newton’s second law the equation of motion reads: ui σij,i + Fj = ρ¨

(1.86)

→ → e i displacement) is the particle acceleration and ρ its u = ui − u ¨i = ∂∂tu2i (− density. Summarizing we should underline that the tensor, discussed here, diﬀers from the tensor of the second rank which we considered earlier, such as the 2

Fig. 1.7. About the determination of the components of a stress tensor

28

1 Physical Fields in Solid Bodies

heat conduction tensor or the tensor of dielectric permeability. These tensors express the properties of a crystal, have a deﬁnite orientation in the crystal and do not match with the symmetry of the crystal (this will be discussed later). These tensors are called material tensors. On the contrary, the stress tensor like the deformation tensor, which will be studied in the next sections, may have any orientation in a crystal. In a sense it is similar to an electric ﬁeld, which may have any direction. Such tensors are called ﬁeld tensors. 1.3.3 Deformed State Let us consider the deformation of a body, where a point P in a Cartesian system of coordinates (x1 , x2 , x3 ) undergoes an displacement getting to point −−→ → u = P P denotes the displacement vector, P with coordinates (x1 , x2 , x3 ). − ui = xi − xi .

(1.87)

We deﬁne the relative deformation of an element ds, which after deformation equals to ds , as ds − ds e= (1.88) ds Let us express it by the displacement vector ui : ds2 = dxi dxi , 2

ds =

dxi dxi

(1.89) 2

= (dxi + dui ) (dxi + dui ) = ds + 2dxi dui + dui dui ,

dui = ui,j dxi , dxi dui = ui,j dxi dxj , dui dui = uk,i uk,j dxi dxj , where

2

ds − ds2 = (2ui,j + uk,i uk,j ) dxi dxj

The expression in the brackets represents the asymmetric-in the general casetensor, which, as it was shown in the preceeding chapter, may be given in the form of the sum of the symmetric tensor of deformation εij : εij =

1 (ui,j + uj,i + uk,i uk,j ) 2

(1.90)

And the asymmetric tensor of rotation: ωij =

1 (ui,j − uj,i ) 2

(1.91)

Substituting εij +ωij into (1.89) due to the convolution with dxi dxj the tensor of rotation disappears: 2

ds − ds2 = 2εij dxi dxj

(1.92)

1.3 Stresses and Deformations. Hooke’s Law

29

and the deformation of the medium (changes of the distances between the points) is determined only by the deformation tensor εij . The rotation tensor ωij characterizes the turn of the particle medium as a rigid unit. Using (1.88) we may express ds2 − ds2 in terms of the deformation e as follows ds = (e + 1) ds

2 2 ds − ds2 = (e + 1) − 1 ds2 = 2e + e2 ds2

(1.93)

In what follows we shall consider only ﬁnite deformations e << 1. Under this assumption (from (1.92), (1.93)) we obtain: e=

εij dxi dxj ds2

(1.94)

Considering the cosines direction s0i of section a ds : dxi = s0i ds, (1.94) reads (1.95) e = εij s0i s0j In (1.95) the tensor of deformations needs to be inﬁnitesimal, that is |εij | << 1, as well as the rotation tensor |ωij | << 1. In that case all derivatives are inﬁnitesimal too, that is |uij | << 1. Under these assumptions the expression for the deformation tensor is simpliﬁed to εij =

1 (ui,j + uj,i ) 2

(1.96)

The components of the tensor εij have a particular mechanical meaning: the diagonal components ε11 , ε22 , ε33 represent tension per unit length along the axes Ox1 , Ox2 and Ox3 , respectively, while the oﬀ-diagonal components, e.g. component ε12 = ε21 , reﬂect the change of the angle between the initially orthogonal elements of the media, taken along axes Ox1 and Ox2 etc. The oﬀdiagonal components of deformation εij (i = j) are called shear deformations. −−→ −−→ Figure 1.8 shows the orthogonal elements P Q1 = {dx1 , 0} and P Q2 = −−−→ {0, dx2 }. After the deformation moves them into P Q1 = {dx1 + du1 , du2 } and −−−→ −−→ P Q2 = {du1 , dx2 + du2 } respectively. The turn of element P Q1 is described −−→ ∂u2 2 by the small angle α1 ≈ tgα1 = dx1du +du1 ≈ ∂x1 , the turn of element P Q2 ∂u1 1 is described by the small angle α2 ≈ tgα2 = dx2du +du2 ≈ ∂x2 . Hence the −−→ −−→ initial angle between P Q1 and P Q2 , which is equal to π2 , changes, during the deformation to α1 + α2 ≈ u2,1 + u1,2 = 2ε12 . The symmetrical tensor of deformation may be transformed to main axes, where all shear components disappear, and only non-zero ones are the main deformations ε1 = ε11 , ε2 = ε22 and ε3 = ε33 . The main deformations can be geometrically explained as follows: Let us consider a cube, the side of which is equal to unity and parallel to the main axes. After the deformation it becomes a rectangular parallelepiped

30

1 Physical Fields in Solid Bodies

Fig. 1.8. About the determination of the geometric meaning of shear deformation ε12

with sides (1 + ε1 ) , (1 + ε2 ) and (1 + ε3 ). During the deformation the cube turns as a unit and this turn is described by the rotation tensor ωij . The relative change of the volume is called the volumetric expansion: ε = (1 + ε1 ) (1 + ε2 ) (1 + ε3 ) − 1 ≈ ε1 + ε2 + ε3

(1.97)

due to the fact that εi is inﬁnitesimal. The given quantity is the ﬁrst invariant tensor of deformation and in the arbitrary system of coordinates is expressed as (1.98) ε = εii 1.3.4 Equations of Compatibility The body deformation εij (i, j = 1, 2, 3) is completely determined by the displacement ﬁeld ui (i = 1, 2, 3). However the displacement ﬁeld ui does not necessarily corresponds to any ﬁeld of deformation tensor εij . Imagine that we cut the body into small cubes. After the deformation, assigned by the tensor εij , each one of the blocks turns into an oblique-angled parallelepiped. It is unlikely to expect that the resulting parallelepipeds can form a solid body again. Formally, relations (1.96) may be considered as a system of six equations for the derivatives of the three unknown, u1 , u2 , u3 , functions. The additional conditions required for εij in order to provide the solvability of the given problem are called compatibility equations. These are obtained by the following relation: ωij,k = where ωij

1 1 (ui,jk − uj,ik ) = (ui,kj + uk,ij − uk,ji − uj,ki ) = εik,j − εkj,i 2 2 (1.99) statisﬁes the next equation ωij,kl − ωij,k = 0

(1.100)

1.3 Stresses and Deformations. Hooke’s Law

31

Substituting (1.99) into (1.100) equations of compatibility read εik,jl − εkj,i − εil,jk + εlj,ik = 0

(1.101)

From the 81 relations of (1.101), only six of them are independent. These are the following: ε11,22 + ε22,11 = 2ε12,12 ε22,33 + ε33,22 = 2ε23,23

(1.102)

ε11,33 + ε33,11 = 2ε13,13 (ε12,3 + ε31,2 − ε23,1 ),1 = ε11,23

(1.103)

(ε23,1 + ε12,3 − ε31,2 ),2 = ε22,31 (ε31,2 + ε32,1 − ε12,3 ),3 = ε33,12 1.3.5 Elastic Body A body is called elastic when the stress at each point is a single-valued function of the deformation at that point. This can be represented by σij = ϕij (εk )

(1.104)

In the one-dimensional case the law of elasticity is given by σ = ϕ (ε)

(1.105)

Let us now consider the homogeneous deformation ε = u/ of an elastic rod (u is the displacement of its end, is the initial length) under the action of a force F = σ · S (S is the rod section), applied to the end of the rod (Fig. 1.9). The work of the outer force is given by u A=

ε F du = S

0

ε σ dε = V

0

ϕ (ε)dε

(V = S is the volume of the rod) passes into the elastic energy. The quantity ε ε U = σ dε = ϕ (ε)dε 0

(1.106)

0

(1.107)

0

is called the volumetric density of the elastic energy. The stress in the rod is expressed in terms of elastic energy as σ=

∂U , ∂ε

(dU = σdε)

i.e. the elastic energy is the stress potential.

(1.108)

32

1 Physical Fields in Solid Bodies

Fig. 1.9. Homogeneous deformation of the rod

In the three-dimensional case, an analogous relation holds: dU = σij dεij

(1.109)

To the requirement of a single-valued connection between the stresses and deformations (1.104) in an elastic body the requirement of absence of nonmechanical losses is usually added (e.g. absence of temperature eﬀects). Mathematically, this is expressed as the condition of zero work over an arbitrary chosen closed cycle: dU = σij dεij = 0 (1.110) L

L

THe above is fulﬁlled when the integrand can be represeneted as a full diﬀerential, hence ∂U σij = (1.111) ∂ εij i.e. the elastic energy U = U (εij ) is the stress potential. In the modern literature the bodies for which conditions (1.110) and (1.111) are satisﬁed, are called hyperelastic, but more often the term elastic bodies is used. 1.3.6 Hooke’s Law. Stress Potential For inﬁnitesimal deformations of elastic bodies, relations (1.104), (1.105) are linear, obeying to Hooke’s law: σ = Eε

(1.112)

σij = cijk εk

(1.113)

or in the general case where cijk are the constants of rigidity for a crystal. The number of the constants, depending on the case under study, may reach a maximum of 81. The single-valued linear (1.113) assumes the possibility of obtaining the reverse linear relation (1.114) εij = sijk σk where sijk are the constants of compliance of a crystal, in all there are 81 constants.

1.3 Stresses and Deformations. Hooke’s Law

33

Relations (1.113), (1.114) express Hooke’s law, and they describe an arbitrary ﬁnite deformation of the crystal. Physically these relations reﬂect the fact that under the action of a simple tension, a crystal may bend and curl. From the mathematical point of view in (1.113) and (1.114) cijk and sijk form the fourth rank tensor of rigidity. In these tensors the number of independent constants is much less than 81. This is due to: the symmetry of the tensors of stresses and deformations, the condition of potentiality (1.111), and the symmetry of the crystal. The latter is the subject of crystalophysics, which will is studied e.g. in the monograph [ ]. The ﬁrst two situations are investigated later in the current chapter. If we apply a shear stress σ12 to a crystal, according to the law of twoness (1.85) σ21 (1.114) reads εij = sij12 σ12 + sij21 σ21 = (sij12 + sij21 ) σ12 Therefore, it is unlikely to design an experiment where we can independenly set values in sij12 or sij21 , since they are connected through Hooke’s law. Therefore, in order to avoid the appearance of arbitrary constants we assume that (1.115) sijk = sijk The symmetry of the tensor of deformation (1.96) is expressed as sijk = sjik

(1.116)

Due to (1.115) and (1.116) the number of independent components of the tensor of compliance is decreased from 81 to 36. The relations which are analogous to (1.115) and (1.116) are also valid for the tensor of rigidity cijk cijk = cijk cijk = cjik .

(1.117) (1.118)

Due to relations (1.117) and (1.118) the number of independent components in the tensor of rigidity is also decreased from 81 to 36. Further decrease in the number of components of tensors cijk and sijk is related with (1.111), from which we get ∂2U ∂σk ∂2U ∂σij = and = , ∂εk ∂εij ∂εk ∂εij ∂εk ∂εij and due to the equality of mixed derivatives we obtain: ∂ σij ∂ σk = ∂ εk ∂ εij

(1.119)

34

1 Physical Fields in Solid Bodies

Substituting (1.113) into (1.119) we get the condition of symmetry with respect to the ﬁrst and second pair of indexes: cijk = ckij

(1.120)

Also, relations (1.119) may be written as ∂ εij ∂ εk = ∂ σij ∂ σk

(1.121)

due to one-to one connection of the tensors of stresses and deformations. Substituting (1.114) into (1.121), the condition of symmetry for the tensor of compliance reads sijk = skij (1.122) Relations (1.120) and (1.122) indicate that the independent components in tensors cijk and sijk are not more than 21 out of 81. 1.3.7 Matrix Designations Because of the symmetry of tensors sijk and cijk (1.120), (1.222) we may use the matrix designations. Let us assign the indexes 1 to 6 to the components of the symmetric tensors of stresses and deformations as follows: ⎤ ⎤ ⎡ ⎡ σ11 σ12 σ13 σ1 σ6 σ5 ⎣σ12 σ22 σ23 ⎦ → ⎣σ6 σ2 σ4 ⎦ (1.123) σ13 σ23 σ33 σ5 σ4 σ3 ⎤ ⎡ ⎤ ⎡ ε1 12 ε6 12 ε5 ε11 ε12 ε31 1 1 ⎥ ⎣ε12 ε22 ε23 ⎦ → ⎢ ⎣ 2 ε6 ε2 2 ε4 ⎦ 1 1 ε31 ε23 ε33 2 ε5 2 ε4 ε3 It is possible to unite the ﬁrst and second indexes of tensors sijkl and cijkl , as well as the third and the fourth according to the next scheme 11 → 1;

22 → 2;

23, 32 → 4;

33 → 3;

31, 13 → 5;

12, 21 → 6.

And in this case we have to introduce the multipliers 2 and 4 as follows: sijk = smn , when m and n are equal to 1,2 or 3 2sijk = smn , when either m or n are equal to 4, 5 or 6 4sijk = smn , when m as well as n are equal to 4, 5 or 6 Under this representation Hooke’s law ((114)) can be written in a more compact form as εi = sij σj (i, j = 1, 2, . . . , 6) (1.124)

1.4 Singular Physical Fields

35

Multiplies 2 and 4 are introduced in order to avoid their appearance in (1.124). For cijk the multipliers should not be introduced, therefore if we will simply write cijk = cmn

(i, j, k, = 1, 2, 3;

m, n = 1, 2, . . . 6) ,

(1.125)

the (1.113) may be represented in the form σi = cij εj

(i, j = 1, 2, . . . 6)

(1.126)

Matrixes cij and sij are symmetric, but they are not the tensors of the second rank. In order to makes transformations of other axes the use of the tensor form is imperative.

1.4 Singular Physical Fields In scientiﬁc and engineering calculations we often confront problems where scalar or tensor physical quantities or components of vectors tend to inﬁnity to some special points in the body. Such physical ﬁelds are called singular. It is important to note that the observed singularities do not refer to a real object, but to its mathematical model. Therefore it is evident that their appearance does not indicate that the situation is catastrophic, it is just the result of the simpliﬁcations assumed for the construction of the model. As an example we may refer to models describing point electric charges or concentrated heat sources. Here the singularity of the electric and temperature ﬁeld respectively, is the result of a complete neglection of the charged body or area, where the heat release takes place. Besides, during the construction of these models we use electropolation and linear laws of electrostatics or heat conduction on the area of unbounded force ﬁelds or unbounded high temperatures. At this point we should note that the linearized models describe in a successful way the electrostatic and heat processes only at the points of the space which lie at a large distance from the charged or heated body (at least at a distance several times as large as its size). If we need a detailed description of the processes occurring in the vicinity of the charge or heat source, we should use a more complex non-linear mode. The solutions in both areas should be in agreement with each other - the asymptotics of the inner solution at inﬁnity should match with the asymptotics of the outer solution at a special point. Analogous problems are caused when we use wedgewise areas for the modeling of electric ﬁelds at the sharp edge of a ﬂat electrode, or mechanic ﬁelds near a sharp notch, and also in the case of modeling of electric ﬁelds in the vicinity of a pointed end of a conductor in conical areas In cases where the sizes of the zone of non-linearity are small compared to the characteristic sizes of the body, singular models have full right to exist.

36

1 Physical Fields in Solid Bodies

We may accept the singularity of the physical ﬁelds at special points, and use the analysis of the asymptotic ﬁelds at special points to construct eﬀective mathematical models of such complex phenomena as mechanical fracture or electric break-down. Main importance, in the process of mathematical modeling, has the analysis of the energy ﬂow directed into special points or special lines, where the energy is discharged from (or ﬂows into) the system by mechanisms that cannot be represented by closed-form equations of a physical ﬁeld. The energy ﬂow coming into the end zone determines the intensity of all these processes of fracture (mechanical or electric), and hence its analysis permits us to estimate the condition under which the global fracture is being initiated, and also to predict its behaviour (resistant or non-resistant, quasistatic or dynamic). 1.4.1 Analysis of the Singularities of Physical Fields The analysis of physical ﬁelds in the vicinity of special points is a rather complex problem, and its solution should be mathematically correct (the solution should be unique and robust with respect to perturbations of boundary conditions and shapes of the body) and physical coherence (continuation and boundness of the displacements in the end area in the absence of concentrated eﬀects, boundness of the energy). Let us consider, as a simple example, a plane problem for the determination of an electric ﬁeld in the vicinity of a wedgelike edge of a conductor bounded with vacuum (Fig. 1.10). According to (1.72) the electrostatics electric potential ϕ = ϕ (r, θ) outside the onductor is a harmonic function satisfying the Laplace equation in cylindrical coordinates r, θ, z (axis z tends along the rib of a wedge): 1 ∂ 2ϕ ∂ 2ϕ 1 ∂ ϕ + 2 + =0 (1.127) 2 ∂r r ∂r r ∂ θ2 It is assumed that the wedge is surrounded by vacuum occupying area −α ≤ θ ≤ α, on the faces of wedge θ = ±α (equipotential surfaces), while the the potential is equal to zero ϕ (r, ±α) = 0

(1.128)

Fig. 1.10. Analysis of an electric ﬁeld in the vicinity of a wedgelike edge of a conductor bounded with vacuum

1.4 Singular Physical Fields

37

We look for a solution to the Dirichlet problem, as given by (1.27)–(1.28), of the form ϕ (r, θ) = rλ f (θ) (1.129) Using (1.129) to (1.127) we get the following ordinary diﬀerential equation, with respect to function f (θ): f + λ2 f = 0, Based on the above form, the general solution of (1.127) reads φ (r, θ) = rλ (A cos λθ + B sin λθ)

(1.130)

Substituting (1.130) into boundary conditions repsresented by (1.128) the following set of homogeneous algebraic equations is obtained: A cos λ α + B sin λα = 0 A cos λα − B sin λα = 0

(1.131)

where the constants A and B are the unknowns. The non-trivial solution of system (1.131) may be found by setting its determinant to be equal to zero cos λα sin λα (1.132) cos λα − sin λα = − sin 2λα = 0 which means that: λ=

π n 2α

(n = 0, ±1, ±2, . . .)

(1.133)

When n is even, A = 0, and when n is odd, B = 0. Thus, the solution of the homogeneous problem of Dirihlet for wedgewise −α ≤ θ ≤ −α is represented in the form of an inﬁnite series π π πn πn nθ + nθ An r 2α cos Bn r 2α sin φ (r, θ) = 2α 2α n=±1,±3,... n=±2,±4,... (1.134) In the above equation we should omit the summands corresponding to negative values of n, as they describe an electric ﬁeld with unbounded energy. Considering the wedgwide area as a limited case of the areas bounded by even surface, we can show that only those solutions, where the energy is bounded, have a physical meaning. Now, take a look at the temr π π cos θ . (1.135) A1 r 2α 2α This term has an unbounded derivative over r at the top, only at α > π/2. In the case of a wedgewise edge conductor, this describes the electric ﬁeld, continuously increasing at approximation to the top of the wedge. The sharp

38

1 Physical Fields in Solid Bodies

increase in the electric ﬁeld near the point on the surface of the conductor is a well-know physical phenomenon, providing various non-linear processes, including electric break-down. In the limiting case of an electrode of zero thickness α = π, we have √ θ ϕ (r, θ) = A1 r cos + . . . 2 A1 ∂ϕ θ = − √ cos + . . . Er (r, θ) = − ∂r 2 2 r A1 θ 1 ∂ϕ Eθ (r, θ) = = − √ sin + . . . r ∂θ 2 r 2 The continuation notation in the last formulas represents the terms of a series which remain bounded or tend to zero as r → 0. The above relations are usually written in the following form: θ 2r cos + . . . ϕ (r, θ) = −KE π 2 θ KE Er (r, θ) = √ (1.136) cos + . . . 2 2π r KE θ Eθ (r, θ) = √ sin + . . . 2 2π r Here instead of A1 we use the the proportional to it constant KE , which is called the electric ﬁeld intensity factor. The value of the intensity factor is extremely important, because it determines the ﬁeld in the vicinity of the sharp edge of the electrode, hence the intensity of the process of preliminarily fracture in the end zone, and the condition of the electric break-down. In order to ﬁnd the dependence of the intensity factor on the outer external action (for example, on the potential of the electrode) we have to solve the problem for the whole conductive body and the ﬁeld which surrounds it. Using (1.136) for the electric potential we can calculate the distribution of the charges on the surface of an electrode near its edge. Taking into account the fact that inside the conductor no ﬁeld exists, we obtain from (1.63) that the density of the charges on the surface of the electrodes (at θ = π) θ 0 KE 1 ∂ ϕ KE √ sin +... =0 +... = √ σ = Dθ =0 Eθ = − 0 r ∂ θ θ=π 2 2π r 2π r θ=π (1.137) At the edge of the electrode (r → 0) the above tends to inﬁnity. Relation (1.137) is usually represented as Kσ σ=√ + ... 2π r

(1.138)

1.4 Singular Physical Fields

39

The above repsrentation introduces the intensity factor of the density charges at the edges of the electrode. This factor can be also determined from the solution of the electric problem for the whole body. The question of choice between the introduced intensity factor KE or Kσ (and KD for electric induction) is not trivial and may be solved only on the basis of the analysis of the experimental data. Depending on the analysis of experiments (also including experiments on the break-down between the surface electrodes), our opinion is that is better to use the concept of the intensity factor of charges Kσ for the calculation of the break down stresses. 1.4.2 The Electric Field of a Charged Conductive Disk Let us carry out the analysis of the singularities of the electric ﬁeld which is produced by an inﬁnitely thin electrode in the form of a round disk in vacuum. In order to get a physically correct solution of this singular problem, we must obtain its solution by solving the classical problem of a conductive ellipsoid in case when its thickness tends to zero. Consider an oblated conductive ellipsoid created by rotation x2 y2 z2 + + =1 R2 R2 c2

(c < R) ,

(1.139)

with a full charge, Q, (Fig. 1.11). The surface of the ellipsoid (1.139) is equipotential (denoting its potential with V ). In order to analyze the electric ﬁeld in the surrounding space we use the cylindrical system of coordinates ρ, φ, z x = ρ cos φ, y = ρ sin φ, ρ = x2 + y 2 and also the system of coordinates of the oblated ellipsoid created by ellipsoid σ, τ, φ. Their relation with the cylindrical coordinates is prescribed by the equations (1.140) ρ = a (1 + σ 2 ) (1 − τ 2 ), z = aστ As a curvilinear coordinate we can consider the oblated ellipsoid created by rotation σ = const (0 ≤ σ < +∞) (Fig. 1.12): a2

ρ2 z2 + 2 2 = 1, 2 (1 + σ ) a σ

(1.141)

and also one-pole rotation hyperboloides for which τ = const (−1 ≤ τ ≤ 1) a2

ρ2 z2 − 2 2 =1 2 (1 − τ ) a τ

and planes φ = const (0 ≤ φ < 2π) y = xtgφ crossing across Oz axis.

40

1 Physical Fields in Solid Bodies

Fig. 1.11. Use of the cylindrical system of coordinates for investigation of a ﬁeld of a charged conductive and oblated ellipsoid of rotation (the half-axes of the ellipsoid are R, R an c (c < R))

The surface of the charged ellipsoid is coordinated surface σ = σ0 . Constants a and σ0 are connected with the sizes of ellipsoids R and c by the relations c = aσ0 (1.142) R = a 1 + σ02 , The z-axis is described by the relations τ = ±1, while the xOy plane is described by τ = 0. The focuses of the systems of ellipsoids and hyperboloids lie in this plane on circle ρ = a.

Fig. 1.12. The orthogonal system of co-focused ellipse (σ = const) and hyperbola (τ = const) with focuses F and F (OF = OF = α). This system determines the system of coordinates of an oblated ellipsoid of rotation, if it is rotated with respect to axis OZ

1.4 Singular Physical Fields

41

The potential of the asymmetric electric ﬁeld outside the ellipsoid Φ (σ, τ ) is a harmonic function, satisfying Laplase equation 1 ∂ ∂ 2 ∂Φ 2 ∂Φ ΔΦ = 2 2 1+σ + 1−τ = 0 (1.143) a (σ + τ 2 ) ∂ σ ∂σ ∂τ ∂τ On the surface of charged ellipsoid σ = σ0 the condition of equipotentiality must be satisﬁed Φ (σ, τ ) = V = const This condition is satisﬁed automatically if the ﬁeld potential is a function only of σ. In this case, Laplace (1.143) is can be rewritten as ∂Φ ∂ 1 + σ2 = 0, ∂σ ∂σ The general solution of the above equation reads (1.144) Φ(σ) = C1 arctgσ + C2 At inﬁnity (when τ = ρ2 + z 2 → ∞) the electric ﬁeld tends to zero, based on the same law, as the Coulomb ﬁeld of a point charge Q: ΦE =

Q →0 4π 0 r

(1.145)

From (1.140) at r → ∞ it follows that r ≈ aσ. If we use this result in (1.145) we will get Φ(σ) =

π Q − arctgσ . 4π 0 a 2

(1.146)

Because on the surface of the ellipsoid the potential has constant value V , from (1.146) it follows that V =

π Q − arctgσ0 4π 0 a 2

with the help of (1.147) we can express (1.146) in the form π π − arctgσ − arctgσ0 Φ(σ) = V 2 2

(1.147)

(1.148)

Here we can use both relations (1.146) and (1.148) according to the prescribed values of full charge Q or potential V . Using (1.146) or (1.148) we can calculate the density of distribution of electric charges σ ∗ on the surface of the ellipsoid σ = σ0 . Using (1.63) we ﬁnd that ∂ Φ 0 ∂ Φ = − (1.149) σ ∗ =0 En = − 0 √ ∂ n σ=σ0 gσσ ∂ σ σ=σ0 2

2

+τ where gσσ = a2 σ1+σ 2 .

42

1 Physical Fields in Solid Bodies

Substitution of (1.146) into (1.149) gives σ∗ =

q 1 2 2 4π a (σ0 + τ 2 ) (1 + σ02 )

(1.150)

With the help of (1.141) and (1.142) we can work with the cylindric system of coordinates in (1.150) and obtain the density of distribution of the electric charges on the surface of the ellipsoid as: σ∗ =

Q 4 4π R − (R2 − c2 ) ρ2

(1.151)

From tha above relation it is seen that at a distance from the axis of Q symmetry the density of charges increases from the minimal value σ ∗ = 4πR 2 Q ∗ at ρ = 0 on the axis of symmetry to the maximal value σ = 4πRc on the edge of the ellipsoid at ρ = R. At the limiting transition c/R → 0 to the inﬁnitely thin circular conductive disk (0 ≤ ρ ≤ R, z = 0) we obtain, that the density of charges tends to inﬁnity approaching the edge at ρ → R σ ∗ (ρ) =

Q 4πR R2 − ρ2

(1.152)

The assympotic analytical expansion into power series of R−ρ order brings to the separation of the main term, which increases at ρ → R Q σ∗ = √ + ... 3 4 π R 2π (R − ρ)

(1.153)

(other terms omitted in expansion (1.153) tend to zero at ρ → R). Comparing (1.153) and (1.138) we can get the factor of the density intensity of charges, which in the general case is determined by

(1.154) Kσ = im σ ∗ (ρ) 2π (R − ρ) . ρ→R

Taking into account (1.152) or (1.151), we also have Q Kσ = √ 4 π R3

(1.155)

Now consider in a more detail the electric ﬁeld created by a charged conductive circular disk of radius R. In that case it is necessary to assume σ0 = 0 in (1.142), (1.146)–(1.148), which means that a = R Φ(σ) =

π Q − arctgσ 4π 0 R 2

(1.156)

1.4 Singular Physical Fields

43

Here Q = 8 0 RV, (hence, the capacitance of a circular disk in vacuum is given by C = Q/V = 8 0 R). Let us now work in the cylindrical system of coordinates. Expressing σ by ρ and z and proceeding from (1.141) we obtain 1/2 √ 2 2 2 2 2 2 2 2 2 σ = z +ρ −R + z +ρ −R + 4R z (1.157) a 2 Equations (1.156) and (1.157) describe the distribution of the potential of a circular disk in the whole space. We ﬁnd more important the asymptotic analysis of the ﬁeld near the edge of the disk. For this purpose we introduce the local system of polar coordinates in φ-const plane passing through Oz-axis (Fig. 1.13) ρ = R + Δ cos θ z = Δ sin θ

(1.158)

(0 ≤ Δ < +∞, −π ≤ θ ≤ π) Substituting (1.158) into (1.157) we obtain at Δ << R that θ 2Δ cos + . . . σ= R 2 The subsequent substitution of (1.159) into (1.156) gives rise to

Q π θ 2Δ Φ(Δ, θ) = − cos + ..., 4π 0 R 2 R 2

(1.159)

(1.160)

which describes an electric ﬁeld in the vicinity of the edge of electrode (Δ << R).

Fig. 1.13. The local polar system of coordinates (Δ, Θ) for the analyzing an electric ﬁeld at the edge of a charged thin conductive disc with radius R

44

1 Physical Fields in Solid Bodies

Here we should mention that (1.160) diﬀers from (1.136) by a constant since (1.136) is derived with the assumption that on the surface of the electrode θ = ±π the potential is equal to zero; hence (1.160) considers the potential, V , on the surface to be non-zero. Calculating the strength of the electric ﬁeld in the Δ, θ system of coordinates as ∂Φ 1 ∂Φ , Eθ = − EΔ = − ∂Δ Δ ∂θ we obtain 1 Q θ √ √ (1.161) cos + . . . EΔ = 3 2 2π Δ 4 0 π R θ 1 Q √ √ EΘ = sin + . . . 2 4 0 π R3 2π Δ Equation (1.161) are in agreement with (1.136), and their comparison allows us to determine the intensity factor of the electric ﬁeld for a circular disk, writting: Q √ KE = (1.162) 4 0 π R3 or, taking into account (1.157) 2V KE = √ πR

(1.163)

The intensity factor of the density of charges Kσ (1.155) diﬀers from KE by the multiplier 0 2 0 V (1.164) Kσ = √ πR Concluding, the above analysis indicates that near the edges of the electrode there is a high concentration of the strength of the electric ﬁeld (in the considered ideal model this concentration is inﬁnite, and the electric ﬁeld is singular on the sharp edges of the electrode). The intense heterogeneity of the electric ﬁeld in the vicinity of the electrode initiates complex physical phenomena such as catastrophs- the electric breakdown - the macroscopic electric fracture of the body. The mathematical modeling of this phenomenon is extremely important and interesting and it will be discussed extensively in the next sections. To solve it we use the methods which were developed in preceding sections for the analysis of the problem of mechanical fracture of rigid bodies. In the next chapters we will try to explain brieﬂy the fundamental ideas of the mechanics of fracture. 1.4.3 Mathematical Idealization of Cracks in an Elastic Body Stress Concentration In the mechanics of fracture the real cracks are considered as strongly extended cavities (voids) which already exist in the body and/or are formed under the

1.4 Singular Physical Fields

45

inﬂuence of outer loads. The precence of a cavity in the body substantially changes its stress state. For example, at uniform tension of a thin rectangular plate with a small circular hole with radius r (r/ << 1, r/c << 1) (Fig. 1.14) normal stresses σ12 on line |x1 | > r, x2 = 0 are determined by r2 3r2 σ22 (x1 , 0) = p 1 + 2 + 4 (1.165) 2x1 2x1 From (1.165) it is seen that the existence of holes causes the local increase of stresses: if at distances r, 2r, 3r from the edge of a void the stresses σ12 exceed the nominal stress by 22, 7 and 4 percent, respectively, at the very edge we have that σ22 = ρ, i.e. the stress increases three times as large, although the opening itself does not practically decreases the cross-section area. In such a case we agree for the creation of the concentration of stresses. A more dense concentration of stresses may be observed at a smaller opening of an elliptic form with half-axes α and b in a uniformly stretched plate (Fig. 1.15). Here the highest value of σ22 is observed at the tips of the ellipse x1 = ±a, x2 = 0 : a σ22 = p 1 + 2 , ρ

(1.166)

where ρ = b2 /a is the radius of the curvature at the tip of the ellipse. For an inﬁnitely thin elliptic cut-out (ρ → 0) the concentration of stresses at the indicated tips gets the largest possible value. The example, shown here, visualizes a substantial dependence of the concentration of stresses on the curvature radius at the given point of the opening contour.

Fig. 1.14. Concentration of stresses at uniform tension of a thin rectangular plate with a small circular opening

46

1 Physical Fields in Solid Bodies

Fig. 1.15. Concentration of stresses at uniform tension of a thin rectangular plate with a small elliptic opening

A Mathematical Model of a Crack Considering a real crack (Fig. 1.16) in a deformed solid body we may always isolate a line I on its boundary – the front of cracks on which the surfaces of cavity 2 are joint – the tips of cracks. It is evident that in the vicinity of the front there is a high concentration of stresses and exactly there, local fractures of the material take place. From the point of view of the statement and solution of the problem of the theory of elasticity the crack edges play the role of an additional boundary of the body. Taking into account the small distances between the boundaries, the real crack may be considered as a mathematical cut, i.e. the cavity of zero volume bounded by two geometrically coinciding surfaces – the edges of the cut. For example, transition from a cavity to a mathematical cut, may be obtained as follows: Consider an unbounded body with a cavity in the form of an elliptic cylinder the element of which is parallel to Ox3 – axis (Fig. 1.17a).

Fig. 1.16. A real crack in a deformed solid body

1.4 Singular Physical Fields

47

Fig. 1.17. Transition from the cavity to the mathematic cut in an unbounded body: a cavity in the form of an elliptic cylinder (a), a mathematical tunnel of a rectangular cut (b)

At the limiting transition b → 0, the ellipse becomes a linear tunnel cut in section (−a, a) of Ox1 - axis. The upper half-ellipse x2 = b 1 − x21 /a2 moves to the upper edge of the cut |x4 | < a, x2 = +0, and the lower half-ellipse x2 = −b 1 − x21 /a2 to the lower edge of the cut |x| < a, x2 = −0 (Fig. 1.17b). Here, we should mention that the linear tunnel cut in an unbounded body or linear through cut in a thin plate is a basic idealized form of a real crack: in an arbitrary small vicinity of the point, O, of the front (Fig. 1.16) the crack may be investigated as a ﬂat crack with a linear front. Hence, in the vicinity of any point of the front of a crack, the study of the stressed deformed state may be carried out in the framework of a plane problem of the theory of elasticity. A Plane Problem of the Theory of Elasticity Before we proceed, we should note that a problem is called plane when the displacements u1 and u2 depend only on x1 and x2 coordinates, and the displacement u3 within the whole body is constant. In the problem under sudy only the following deformations ∂ u1 ∂ u2 1 ∂ u1 ∂ u2 , ε22 = , ε12 = + (1.167) ε11 = ∂ x1 ∂ x2 2 ∂ x2 ∂ x1 and stresses σ11 = (λ + 2μ) ε11 + λε22 , σ22 = λε11 + (λ + 2μ) ε22 ,

σ12 = 2με12

(1.168)

diﬀer from zero. λ and μ are the elastic constants of the material. Such a state approximately appears in a long cylinder (Fig. 1.18) on the surface of which normal loads act, which are uniformly distributed along its elements (state of plane deformation). The same appear in a thin plate

48

1 Physical Fields in Solid Bodies

Fig. 1.18. Realization of a plane stressed state in a thin plate

(Fig. 1.19) under the inﬂuence of the system of outer load, which are parallel and symmetrically distributed with respect to its middle surface (plane stressed state). For a plane deformation the elastic factors λ and μ are related with Young’s modulus E and Poisson’s ration as follows λ=

Ev , (1 + ν) (1 − 2ν)

μ=

E , 2 (1 + ν)

and for the plane stressed state the constant λ in (1.168) should be substi tuted by λ (1 − 2ν) (1 − ν) and by stresses, deformations and displacements everywhere it is necessary to assume the values averaged according to the thickness of the plate. For example the displacement will be 1 u ¯ (x1 , x2 ) = 2h

+h u (x1 , x2 , x3 ) dx3 . −h

Fig. 1.19. Realization of a plane stressed state in a thin plate

1.4 Singular Physical Fields

49

Stressed State in the Vicinity of Linear Cracks Cracks of Normal Fracture Consider a plane problem in the framework of elasticity for an unbounded body with a linear cut on the part of the body |x1 | < a, x2 = 0 (Fig. 1.20a). The cut is considered to be an unbounded tunnel in the direction of x3 - axis if we solve the problem of plane deformation. The cut runs through the body, if we study the plane stressed state of a thin plate. Let us assume that the edges of the cut be free from outer loading, and that far from the cut act constant stretched stresses p0 (see Fig. 1.20a). In that case the linear crack is called the crack of normal break, as under the inﬂuence of the load p0 its tips are separated in opposite directions symmetrically to the plane of the crack. Due to the linearity of the equations in the framewrok of elasticity theory, the solution of the problem may be represented in the form of a sum of solutions of the two problems (Fig. 1.20b,c). In the ﬁrst problem (see, Fig. 1.20b) we consider a uniformly stretched plane without a break, while in the second problem a stressed state of the plane with a cut on the edges of which normal stresses σ22 = −p0 act, is determined. The normal stresses with opposite signs which originate on the place of the cut in the ﬁrst problem (Fig. 1.20b). Besides, taking into account the symmetry of the load and the geometry of the area we set σ12 = 0 at x2 = 0, |x| < ∞. The solution of the ﬁrst problem is elementary (σ11 = σ12 = 0, σ22 = p0 ), and the solution of the second problem may be limited to the investigation

Fig. 1.20. Representation of the solution of the problem of tension of an unbounded body with a transversal cut (a), in the form of a superposition of the solutions of the problem of uniform tension of a body without a cut (b) and the problem of a body with a cut, on the edges of which there act normal loads (c)

50

1 Physical Fields in Solid Bodies

of the stressed deformed state of the upper half-plane (x2 > 0) only, on the boundary of which the following conditions should be satisﬁed σ12 (x1 , 0) = 0, |x1 | < ∞, σ22 (x1 , 0) = −p0 , |x1 | < a,

(1.169) (1.170)

u2 (x1 , 0) = 0,

(1.171)

|x1 | > a.

It is obvious that the stressed state of the half-plane x2 > 0, satisfying conditions (1.169)–(1.171) is localized in the area of the cut, |x| < a, x2 = 0 and at x21 + x22 → ∞ all the stresses and displacements tend to zero. The analysis of stresses and displacements in the vicinity of the tips of the cut (point x1 = a, x2 = 0) requires the introduction of polar coordinates with the center at the point x1 = a, x2 = 0; x1 = a + r cos ϕ, x2 = r sin ϕ. It is possible to show that in a small vicinity around the tip of the cut, i.e. at r → 0 the components of the stresses and displacements are determined by the following asymptotic relations 3ϕ KI ϕ 1 σ11 = √ , (1.172) cos − sin ϕ sin 2 2 2 2π r 3ϕ KI ϕ 1 , cos + sin ϕ sin σ22 = √ 2 2 2 2π r 3ϕ KI 1 sin ϕ cos , σ12 = √ 2 2π r 2 √ ϕ KI r κ + 1 ϕ − cos2 u1 = √ cos , 2 2 2 μ 2π √ KI r κ + 1 ϕ ϕ u2 = √ − cos2 sin . 2 2 2 μ 2π

(1.173)

Here κ = (3 − ν) / (1 + ν) for the plane stressed state and κ = 3 − 4ν for the plane deformation, while KI is calculated by,

KI = im σ22 (x1 , 0) 2π (x1 − a) , (1.174) x1 →a

The latter is called the stress intensity factor of a normal break. We will show that the behaviour of the crack and fracture of the body depends on KI . In the considered case p0 x1 σ22 (x1 , 0) = 2 , x1 − a2

(x1 > a) .

(1.175)

If we substitute (1.175) into (1.174) and calculate the limit we will get √ (1.176) K I = p0 π a

1.4 Singular Physical Fields

51

At this point, we should note that (1.172) and (1.173) are valid for other cracks of normal break in ﬁnite and inﬁnite bodies, and depending on the values of loads, the size of the cracks and the sizes of the body, the corresponding intensity factor is given by (1.174). For example, for a crack, the tips of which break by arbitrarily distributed normal loads with intensity p0 (x1 ), we have that 1 KI = √ πa 1 KI = √ πa

a p0 (ξ)

a+ξ dξ, a−ξ

(1.177)

p0 (ξ)

a−ξ dξ. a+ξ

(1.178)

−a a

−a

Here, (1.177) refers to the ﬁrst tip of the crack, and (1.178) to the left tip. It is obvious that for a symmetrically loaded crack (p0 (−x1 ) = p0 (x1 )) both equations give the same results. Consider the cracks loaded by a uniformly distributed normal pressure p0 on the section of length 2ε in the center of the crack: p0 (ξ) = p0 at |ξ| < ε and p0 (ξ) = 0 at ε < |ξ| < a. Substitution of these expressions into (1.174) gives p0 KI = √ πa

ε −ε

2p0 a ε a+ξ dξ = √ arcsin . a−ξ πa a

(1.179)

In the case of loading of the crack by two concentrated forces P (Fig. 1.21) we may obtain the factor KI , if we consider ε → 0 and p0 → ∞, thus that 2p0 ε → P . This limiting transition in (1.179) leads to √ KI = P π a. (1.180)

Fig. 1.21. A crack of a normal break loaded by a pair of concentrated forces applied in the middle of the edges of the crack

52

1 Physical Fields in Solid Bodies

A Crack of a Transversal Shear Let us assume that an unbounded plane is under the inﬂuence of known and permanent tangential stresses σ12 = τ , at inﬁnity. The plane contains a linear crack located on x1 axis (x2 = 0) described by equation |x1 | < a, the tips of which have no outer loads (Fig. 1.22a). In this case the edges of the cut are displaced with respect to each other along the line perpendicular to the front of thickness (called the thickness of a transversal shear). The solution of the plane problem for cracks of transversal shear, in the framework of elasticity theory, may also be represented in the form of a sum of solutions of two problems: in the ﬁrst problem (Fig. 1.22b) we consider an unbounded plane without a cut that has known load at inﬁnity, that is tangential stresses σ12 = τ0 . The second problem is an unbounded plate loaded by shear forces σ12 = −τ0 . The solution of the ﬁrst problem is the trivial σ11 = 0,

σ12 = τ0 ,

σ22 = 0,

(1.181)

and for the solution of the second problem (Fig. 1.22c) it is enough to consider the half-plane x2 > 0 under the following conditions on the boundary x2 = 0 σ22 (x1 , 0) = 0,

|x1 | < ∞,

σ12 (x1 , 0) = −τ0 , u1 (x1 , 0) = 0,

|x1 | < a,

|x1 | > a.

(1.182) (1.183) (1.184)

To describe the distribution of stresses and displacements in the vicinity of the tips of the crack of a transversal shear we introduce the polar coordinates

Fig. 1.22. Representation of the solution of the problem of a transversal shear of a body with a cut (a), in the form of a superposition of the solution of the problem of a transversal shear of solid body (b) and the problem of a body with a cut, to the edges of which there are applied transversal tangential loads (c)

1.4 Singular Physical Fields

53

r, ϕ with a pole at the tips x1 = a, x2 = 0. Then at r → 0 the following asymptotic equations are obtained 3ϕ ϕ KII ϕ sin σ11 = − √ 2 + cos cos , (1.185) 2 2 2 2π r ϕ 3ϕ ϕ KII , sin cos cos σ22 = √ 2 2 2 2π r 3ϕ KII ϕ ϕ σ12 = √ cos 1 − sin sin , 2 2 2 2π r √ ϕ 1+κ ϕ KII r + cos2 sin , (1.186) u1 = √ 2 2 2 μ 2π √ ϕ κ−1 ϕ KII r + sin2 cos u2 = √ . 2 2 2 μ 2π √ here KII = τ0 πa is the stress intensity factor of a transversal shear. The above equations are valid at an arbitrary distribution of tangential stresses along the cracks τ0 = τ0 (x1 ), but the value of the stress intensity factor is determined by the equations KII

a

1 = im σ12 (x1 , 0) 2π (x1 − a) = τ0 (ξ) x1 →a πa

KII

a

1 = im σ12 (x1 , 0) 2π (x1 + a) = τ0 (ξ) x1 →−a πa

−a

−a

a+ξ dξ, a−ξ

(1.187)

a−ξ dξ. a+ξ

The above relations hold for the left and right tips of the cracks, respectively. A Crack of a Longitudinal Shear Let us now consider one more variant of the stressed deformed state appearing in some 2-dimensional elements of real constructions, where all main characteristics, that is stress, deformations and displacements are functions of the two variables x1 , x2 u1 = 0,

u2 = 0,

u3 = u3 (x1 , x2 )

(1.188)

In this case only the following deformations diﬀer from zero ε23 =

1 ∂ u3 , 2 ∂ x2

ε13 =

1 ∂ u3 2 ∂ x1

(1.189)

∂ u3 , ∂ x1

(1.190)

As well as the following stresses σ23 = μ

∂ u3 , ∂ x2

σ13 = μ

54

1 Physical Fields in Solid Bodies

and function u3 (x1 , x2 ) is harmonic ∂ 2 u3 ∂ 2 u3 + = 0. 2 ∂ x1 ∂ x22 Such a state is called the state of antiplane or longitudinal shear. It is approximately realized in a long cylindrical body whose surface is under the inﬂuence of only tangential forces directed along the element of the cylinder (Ox3 -axis). Under the condition of the anti-plane stressed deformed state we consider an unbounded elastic body with a tunnel crack located on the Ox1 x3 - plane (Fig. 1.23) and loaded along the edges of the tangential stresses σ23 (x1 , ±0) = −τ1 (x1 ) ,

|x1 | < a,

|x3 | < ∞.

From the solution of that problem we may ﬁnd the distribution of stresses σ23 , σ13 and displacement u3 in the vicinity of a tunnel crack. Here the asymptotic equations are valid for a small vicinity of the point x1 = a, x2 = 0 and they are given by

where KIII =

KIII ϕ σ23 = √ cos , 2 2π r

(1.191)

u1 = u2 = 0,

(1.192)

√1 πa

!a −a

τ1 (ξ)

KIII ϕ σ13 = √ sin , 2 2π r √ KIII 2r ϕ √ sin , u3 = μ 2 π

a+ξ a−ξ dξ

is the stress intensity factor for a crack

with a longitudinal shear, determined as

KIII = im σ23 (x1 , 0) 2π (x1 − a) . x1 →a

Fig. 1.23. An unbounded body with a tunnel cut, to the edges of which longitudinal tangential loads are applied

1.4 Singular Physical Fields

55

Classiﬁcation of a Crack According to the character of the deformed state in the vicinity of the front of cracks we may distinguish three main types of deformation for the local elements of the medium, containing the front of cracks, and, hence, three types of cracks: a) the crack of a normal break, b) the crack of a transversal shear and c) the crack of a longitudinal shear (Fig. 1.24) In all three cases the stressed-deformed state, in a small vicinity of the origin of the coordinates, is determined by the asymptotic (1.172), (1.173), (1.185), (1.186), (1.191) and (1.192). These equations contain three parameters, namely the stress intensity factors KI , KII , KIII . The values of these parameters are obtained from the solution of the corresponding problems of the mathematical theory of elasticity and are important linear characteristics of the ﬁelds of stresses and displacements in the front of the cracks. The stress intensity factors depend on the outer load, geometry of the body with a crack and the coordinates of the considered point of the front of the cracks. With the solutions of the problems for cracks of normal breaks for transversal and longitudinal shear at hand, we can investigate the stressed state in the vicinity of the point of the front of the cracks with arbitrary normal and tangential loads on its edges. It is obvious, that in the general case of loading, the ﬁelds of stresses and displacements are determined as a sum of the corresponding ﬁelds for the indicated three states of deformation of the local element. It is important to note that the corresponding asymptotic equations are obtained as a result of the solution for the problem of the cracks which in the framework of the linear theory of elasticity are considered as mathematical cuts. The consequences of such a strong idealization are, for example, inﬁnite stresses at points of the front of the cracks, which cannot be observed in reality as well as inﬁnite density of a substance at a material point. In the front of the real crack the stresses are bounded by the limits of the strength or ﬂow of the material. The use of the linear theory of elasticity gives us an almost-true picture for the behavior of the body with cracks in those practically important

Fig. 1.24. Classiﬁcation of main types of displacement of the surface of a crack: a crack of a normal break (a), a crack of a transversal shear (b) and a crack of a longitudinal shear (c)

56

1 Physical Fields in Solid Bodies

cases where the deviation from the linear theory of elasticity takes place only in the small vicinity at the front of the cracks. 1.4.4 Criterion of Fracture of a Body with a Crack The Theory of Griﬃts It was shown that in the vicinity of the crack tip there is a considerable concentration of stresses, which can cause the break of the bounded atoms at the crack tip, growth of the cracks and eventually the complete failure of the body. Thus, the main problem of the mechanics of fracture of a deformed body is the determination of the value of the critical load. If we apply the critical load to the crack, the crack will enlarge catastrophically. If we want the crack to propagate and its surface to enlarge by ΔS, we need to oﬀer work ΔΓ = 2γΔS to overcome the coalescence of the material particles (γ is the speciﬁc work of fracture with respect to the unit area of the crack surface). The energy that it is required for fracture appears at the expense of the reduction of the energy of deformation of ΔU and at the expense of the work of outer forces ΔA ΔΓ = ΔU − ΔA = −ΔE. The variable E = U − A represents the potential energy of the body. The crack stayes motionless if 2γΔS > −ΔE (1.193) and may start its growth when the sign in inequality (1.193) changes −ΔE ≥ 2γ ΔS.

(1.194)

The equality sign in (1.194) determines the critical state, at which the crack loses its stability. Moving to the limit at ΔS → 0, we can write down the limiting condition in the form of −

dE = 2γ dS

(1.195)

The quantity γ is assumed to be a constant related to the material which may be measured experimentally. Griﬃths, who derived condition (1.195), assumed that γ is the surface energy of the body; however such a representation appeared to be admissible only for very brittle materials of glass type. However, Griﬃths’ condition (1.195) may successfully describe the fracture of many constructive metallic and non-metallic materials, if by γ we imply the speciﬁc energy used for plastic deformation and fracture in the thin layers of the material adjoining to the crack. From condition (1.195) we can either determine the critical load for the body with a crack of a given size, or the critical size of the crack in the body, on which given load acts.

1.4 Singular Physical Fields

57

For a crack of length 2a in an unbounded plate of unit thickness (S = 2a · 1) stretched by stresses σ22 = p in the direction perpendicular to the crack, the potential energy is calculated by the formula E = E (a) = const −

π p 2 a2 E

Using condition (1.195) we obtain πp2 a = 2γE. Hence 2γ E pcr = πa

(1.196)

(1.197)

is the critical load causing the fracture of the plate with a crack of the given length of 2a and 4γ E 2acr = (1.198) π p2 is the critical size of the crack under the given loading p. dE The direct calculation of the ﬂow of energy, G = − dS , through the tip of the crack becomes a very complex mathematical problem even in the simple case of (1.196). In order to calculate the growth of the crack surface on ΔS we may ﬁrstly use an imaginary cut which begins at the front of the given crack, at the same direction. The size of the imaginary crack is to be found, while the crack is loaded as described in Fig. 1.25a. Then if we slowly decrease these stresses to zero, we can obtain a crack of area increased by a factor of ΔS (Fig. 1.25b) The estimation of the ﬂow of energy G = −dE/dS in that way is valid only close to the vicinity of the front of the crack, where we may divide the stressed deformated state into three components: normal break, transversal shear and longitudinal shear, and we can also use the corresponding asymptotic equations. Hence, for the crack of normal break (see Fig. 1.24) we obtain 1 G = − im Δa→0 2Δa

Δa σ22 2u2 dx1

(1.199)

0

Fig. 1.25. Calculation of the ﬂow of energy G passing to the tip of the crack; the initial state - the crack on the area of length Δa is closed by compressing stresses (a), the ﬁnal state - the edges of the crack are free from loads, the crack is completely open

58

1 Physical Fields in Solid Bodies

The asymptotic (1.172) and (1.173) √ σ22 = KI 2π x1 , (r = x1 , φ = 0) 4 1 − ν2 Δa − x1 KI , (r = Δa − x1 , ϕ = π) u2 = E 2π

(1.200)

together with the condition, given by (1.199) give Δ a 4 1 − ν 2 KI2 1 Δa − x1 im dx1 . G= Δa→0 2π E Δa x1

(1.201)

0

This integral, with the help of the variable x1 = Δα sin2 θ reads:

π/2 1 − ν 2 KI2 4 1 − ν 2 KI2 2 . 2 cos θdθ = G= 2π E E

(1.202)

0

In the same way we can determine the ﬂow of energy for cracks of transversal and longitudinal shear and for cracks of the general form G=−

# 1+ν " dE 2 2 = + KIII (1 − ν) KI2 + KII da E

(1.203)

Substituting G into (1.195) we obtain the condition of local fracture at a point of the front of the crack of the general type # 1+ν " 2 2 (1 − ν) KI2 + KII + KIII = 2γ E

(1.204)

Force Criterion of Fracture The energetic condition of fracture (1.204) may be written in the following form: for a crack of normal break (KII = KIII = 0) (1.205) KI = KIc , where KIc = Eγ/ (1 − ν 2 ) is the constant material which is called the critical stress intensity factor or the viscosity of fracture. for a crack of transversal shear (KI = KIII = 0) KII = KIc

(1.206)

for a crack of longitudinal shear (KI = KII = 0) where KIIIc

KIII = KIIIc . = 2Eγ/ (1 + ν) is the constant material.

(1.207)

1.4 Singular Physical Fields

59

According to (1.205)–(1.207), the local fracture for the given material takes place when the constant of the critical values of the stress intensity factor is reached. This is the force criterion of fracture equivalent to Griﬃths’ criterion. Let us now consider some examples of application of the force criterion of fracture for a crack of normal break. Example 1 Let an unbounded thin plate have a thorough crack of length 2a and the plate stretches at inﬁnity of uniform load σ22 = p (see Fig. 1.20). In this case the stress intensity factor is determined by (1.176). Using the criterion (1.205) we ﬁnd the ultimate load, for which the crack will start developing: √ pcr π a = Kc

(1.208)

Here the quantity Kc (which is diﬀerent from KIC ) appears, and as for thin plates the experiment gives the critical value of the stress intensity factor that exceeds KIc and depends on the thickness of the plate. Thus, the thickness of length 2a starts to grow if the load p reaches the ultimate value of pcr = Kc

√ πa

(1.209)

If the applied methods of nondestructive testing cannot discover cracks of length less than 2a, (1.209) allows us to determine the limiting level of load, at which the “defectless” plate may be used. Example 2 Let the load of a through crack of a normal break be carried out by a couple of concentrated forces, applied to its edges in the middle of the crack (Fig. 1.21). In the given case, according to (1.180) and the criterion of fracture (1.205) the limiting values of force P which causes the increase of the crack, is determined by the expression √ Pcr = Kc π a

(1.210)

Example 3 By applying a compressing force −P we may decrease or even remove the stress concentration at the tip of the crack on the plate stretched by stress p0 . The stress intensity for such a loading may be calculated by (1.180) and (1.176) (see Figs. 1.20, 1.21 and 1.26) √ P K I = p0 π a − √ . (1.211) πa In engineering manufacturing is widely used to imposing reinforcing constraints in order to prevent brittle fractures.

60

1 Physical Fields in Solid Bodies

Stability of a Crack Growth In the example of a crack of normal break we can investigate the problem of stability of a limiting state of a body with respect to small disturbances of the load p and the size of crack α. The growth of the crack by small quantity dp > 0 may be accompanied by the increase of the load parameter dp > 0 or its decrease by dp < 0. The crack is considered to be stable if dp/da > 0, i.e. if for the further growth of the crack the applied load is increased. On the other hand when dp/da < 0, the crack will grow spontaneously even under permanent or decreasing load and it is called unstable. According to the local criterion of fracture (1.205) we have

Then

KIc = KI (p, a)

(1.212)

∂ KI ∂ KI dp =− da ∂a ∂p

(1.213)

As ∂KI /∂p > 0, the crack of normal break is stable, if the stress intensity factor is a decreasing function of the length of crack ∂KI /∂a < 0. The instability is observed in those cases, where the stress intensity factor is an increasing function of the length of crack ∂KI /∂a > 0. In particular, for cracks on a stretched plate according to (1.176) we get √ √ p π ∂ KI KI = p π a, = √ > 0, ∂a 2 a i.e. such a crack in the limited state becomes unstable. The opposite result is obtained for cracks of normal break, loaded by two concentrated forces. The stress intensity factor at the tip is determined by (1.180) and for such a crack the following equality is satisﬁed P ∂ KI =− √ < 0. ∂a 2a π a

Fig. 1.26. Modeling of the inﬂuence of reinforced connections on the concentration of stresses near the tips of the crack: a pair of oblated concentrated forces applied to the edges of a transversal crack in a stretched plate

1.4 Singular Physical Fields

61

Thus, a crack of normal break loaded by two concentrated forces is stable. If we apply a force P to a crack of length 2a0 , the quantity of which exceeds the critical ones (1.210) √ P > K c π a0 Beyond this value the crack will start to grow; it will stop when its length √ reaches 2a∗ which is deﬁned by the critical condition P = KC πa∗ . The unstable growth of a crack of a arbitrary form is accompanied by an increase of the velocity of the elastic energy release, upon increasing the length of crack dG/da > 0, i.e. in order to analyze the stability of the crack of general form by formula (1.203) it is enough to know the dependence of the stress intensity factor on the length of the crack. The condition of instability is the inequality # d " 2 2 (1 − ν) KI2 + KII + KIII > 0. da

This page intentionally blank

2 Basic Equations of the Linear Electroelasticity

2.1 The Linear Theory of the Piezoelectricity A piezoelectric material is subject to the coupled action of mechanical and electrical ﬁelds. This is caused by the asymmetry of the atomic lattice of the piezoelectric material (ferroelectric). These materials pose a very interesting property: under the action of an electric ﬁeld the material undergoes a deformation and vice versa, a deformation of a piezoelectric material gives birth to an electric ﬁeld. Based on that, the piezoeﬀect may be classiﬁed as a reverse and direct one. For describing in a complete and accurate way the behavior of such materials, it is vital to consider not only the relation between the stressed and deformed state of the body, but also the equations of the electromagnetic ﬁeld in the medium. Contrary to the case of vacuum, in a material medium, which is under the inﬂuence of an external electomagnetic ﬁeld both electric polarization and magnetization eﬀects appear. Maxwell’s equations for that case are → − → − → − rot E = −∂ B ∂ t, (2.1) div D = ρ∗ , → − → − → − → − rot H = ∂ D ∂ t + j , div B = 0. → − → − where D is the vector of the electric displacement, E is the vector of the → − → − electric ﬁeld strength, H and B are the vectors of the magnetic ﬁeld strength → − and magnetic induction, respectively, ρ∗ is the free charge density, j is the → − → − free charge current density. The components of the vectors D and H are deﬁned by the equalities Di =0 Ei + Pi ,

Hi =

Bi − Mi , μ0

(2.2)

→ − − → where the vectors P and M characterize the properties of polarization and magnetization of the medium under study and the constants 0 = 8.85 ·

64

2 Basic Equations of the Linear Electroelasticity

10−12 F/m and μ0 = 12.56 · 10−7 H/m are the dielectric and magnetic permittivity of the vacuum respectively. If we consider vacuum as the surrounding medium, it is necessary to in→ − − → troduce P = M = 0 into (2.2); in that case, (2.1) may be written in terms → − → − of two vectors, e.g. the vectors E and H . Under this formulation the system (2.1) becomes solvable. If medium under consideration is a material (2.1), (2.2) can be solved → − → − − → − → assuming availability of the functional dependences P = P E , M = − → − → → − − → − → M B and J = J E ; for a given material, these are usually estimated experimentally and take the form of linear relations. In particular, for an anisotropic medium the linear relations connecting the components of the → − → − vectors D and E can be represented in an index notation as (f course, the summation is over repeated indexes) Di =ij Ej .

(2.3)

where ij is the symmetrical tensor of dielectric constants. In reality (2.3) reﬂect only the physical processes in the deﬁnite inter→ − val of Ei and correspond to zero polarization for E = 0. However the last condition is not true for ferroelectric materials where the polarization occurs when Ej = 0. The experiments show that in the case of a direct piezoeﬀect and in the absence of an electric ﬁeld, the vector of polarization of the piezoelectric is related in a linear way with the components of the mechanical stress tensor σk (k, = 1, 2, 3) as (2.4) Pi = dik σk , where dik are the piezoelectric components of a third-rank tensor. The linear connection between the electric ﬁeld strength Ei and the deformation tensor εij of a mechanically free crystal (σij = 0) is a mathematical interpretation of the reverse piezoeﬀect: εij = dkij Ek .

(2.5)

Since εij = εji , tensor dkij is symmetrical, according to (2.5) regarding the last two indexes. Hence the number of the independent components of the tensor decreases from 33 = 27 to 18. Depending on the crystal symmetry it is possible to obtain a further decrease in the number of independent piezoelectric modulus. By using elements of tensor analysis it is possible to show that in the presence of a centre of symmetry, the crystal cannot poses piezoelectric properties. The crystal structure of ferroelectrics, such as titanite barium, niobate lithium, and ceramics PZT, reveals that they have a non-zero dipole moment. Above a temperature (which is called Curie point) the directions of the dipoles are random. It is possible to polarize (i.e. to orientate the dipoles in the

2.1 The Linear Theory of the Piezoelectricity

65

chosen direction, of the external ﬁeld) the ferroelectric material, by applying an intensive electric ﬁeld at a temperature close to the Curie point. In that case most of the domains within the material which are macroscopic areas of ordered directions of the dipoles have a similar orientation. The polarization process is used in practice for the creation of artiﬁcial piezoelectric materials with the desirable electroacoustic characteristics. At this point, it is necessary to show the diﬀerence of the piezoeﬀect from the electrostriction, which occurs in any dielectric under the eﬀect of an electric ﬁeld and is proportional to the square of its strength. In materials, except those that have high dielectric permittivity, the electrostriction- when compared to the piezoelectric eﬀect- may be neglected. This is related with the fact that internal ﬁelds produced by the asymmetry of the lattice exceed the possible external ﬁelds by several orders. It is interesting to mention that (2.4), (2.5) have similar piezoelectric tensor coeﬃcient. This fact can be obtained from thermodynamic analysis, on the basis of the law of conservation of energy formulated for a piezoelectric media. Under the action of external loads and a electromagnetic ﬁeld, the macroscopic form of the energy balance for a piezoelectric with volume V reads 1 d Xi u˙ i + Ei D˙ i dV + ρu˙ i u˙ i + U dV = qi u˙ i dS. (2.6) dt 2 V

V

∂V

where U is the internal energy density, ui is the vector of the mechanical displacement, Xi are the mass forces, qi = σij nj are the surface forces, ρ is the density of the material, ni is the vector of a single normal to the surface ∂V , while time derivatives are designated by a dot. In the right-hand side of (2.6) the expression Ue = Ei D˙ i dV V

is for the ﬂow of electromagnetic energy in the electrostatic approximation [137] and the quantity L = Xi u˙ i dV + qi u˙ i dS V

∂V

for the power of the external forces. Applying the equations of motion ∂j σij + Xi = ρ¨ ui ,

∂j = ∂/∂ xj (i, j = 1, 3)

(2.7)

66

2 Basic Equations of the Linear Electroelasticity

and using the symmetry of the stress tensor σij , the surface integral in (2.6) is transformed in qi u˙ i dS = σij u˙ i nj dS = (u˙ i ∂j σij + σij ∂j u˙ i ) dV = ∂V

∂V

=

V

.. −Xi u˙ i + ρi ui u˙ i + σij ε˙ij dV,

(2.8)

V

where εij = 12 (∂j ui + ∂i uj ) is the deformation tensor. Taking into account (2.8) the equation of the energy balance (2.6) becomes U˙ dV = σij ε˙ij + Ei D˙ i dV. (2.9) V

V

Since the equality (2.9) is valid for any arbitrary chosen volume, the local energy equation reads U˙ = σij ε˙ij + Ei D˙ i . (2.10) The internal energy U is a function of the independent thermodynamic variables εij , Di and therefore U˙ =

∂ ∂U ˙ Di . ε˙ij + ∂ εij ∂ Di

(2.11)

From expressions (2.10), (2.11), because of the arbitrary time derivatives we can get the following relations σij =

∂U , ∂ εij

Ei =

∂U . ∂ Di

(2.12)

Thus on the basis of (2.10), (2.12) the total diﬀerential of the internal energy is given by dU = σij dεij + Em dDm . (2.13)

where σij =

∂U ∂ εij

, D

Em =

∂U ∂ Dm

ε

,

(2.14)

and the lower indexes show that D and E are constant for the process of partial diﬀerentiation of function U . The total derivatives that depend on variables σij and Em can be written as ∂ σij ∂ σij dεk + dDm , (2.15) dσij = ∂ εk D ∂ Dm ε ∂ Em ∂ Em dεij + dDk . dEm = ∂ εij D ∂ Dk ε

2.1 The Linear Theory of the Piezoelectricity

67

The above equations can be written in a more compact form as dσij = cD ijk dεk − hijm dDm , dEm = −hmij dεij +

(2.16)

ε βmk dDk .

where cD ijk denotes the tensor of the modulus of electricity at constant electric ε denote the dielectric constants at ﬁxed deformations and hmij induction; βmk the tensor of piezoelectric constants. When the range of the values of the variables Dk and εij is small the equalities (2.16) can be integrated. As result we get the following linear equations describing the piezoelectric medium state: σij = cD ijk εk − hijm Dm , Em = −hmij εij +

(2.17)

ε βmk Dk .

Other forms of the equations of the state can be derived, in an analogous manner, with the help of other thermodynamic potentials. If we take the deformations εij and the strength of the electric ﬁeld Ei to be independent variables, then the stresses σij and electric induction Di are the dependent ones. Then, using the Gibbs electric function G = U − Em Dm [140] we ﬁnd σij = cE ijk εk − eijm Em , Dm =εmk

(2.18)

Ek + emij εij .

Where εmk , eijm are tensors of dielectric permittivity (at the constant deformation) and of piezoelectric constants. Using the expression for the complete Gibb’s potential G = U − σij εij − Em Dm we can derive another form of the equations of state, reading εij = sE ijk σk + dkij Ek , Di = dijk σjk +

σij

(2.19)

Ej

The optimal choice of any equation system out of (2.17)–(2.19) is deﬁned by the speciﬁc range of problem of the theory of electroelasticity. When studying wave processes in piezoelectric media it is convenient to use (2.17), (2.18); in piezoelectric shells and plates, for the investigation of the associated ﬁelds it is recommended to consider (2.19). Relations (2.17) as well as (2.18) and (2.19) should be written in matrix form, when solving problems. Here we introduce the following rules Γ11 = Γ1 , Γ22 = Γ2 , Γ33 = Γ3 , Γ23 = Γ4 , Γ13 = Γ5 , Γ12 = Γ6 , where, Γ is for the stress tensor σij or the deformation tensor εij . The tensors cijk , sijk are symmetrical by the ﬁrst two (i and j) and the last two (k and l)

68

2 Basic Equations of the Linear Electroelasticity

indexes so we can write them as: cijk = cαβ ,

sijk = sαβ ,

(i, j, k, = 1, 2, 3;

(2.20)

α, β = 1, 2, ..., 6) .

Consequently, the coeﬃcients cαβ (α, β = 1, 2, . . . , 6) form a square matrix (6 × 6). Taking into account the symmetry of the tensors emij and dmij by the pair of the last two indexes we have emij = emα , (m = 1, 2, 3;

dmij = dmα , α = 1, 2, ..., 6) ,

(2.21)

Hence we get a 3x6 matrix having as elements the piezoelectric constants. As a result, the equations of state (2.18) read σα = cE αβ εβ − eαm Em ,

(2.22)

Dm =εmk

Ek + emα εα , (m, k = 1, 2, 3; α, β = 1, 2, ..., 6) .

In the general case of a crystal of the triclinic system (2.22) contain 21 modules of elasticity, 18 piezoelectric and 6 dielectric constants. The crystallographic symmetry (relating to chosen coordinate axes) in the deformed piezoelectric body decreases substantially the number of independent constants in the above equations. In Table 2.1 are given the nonzero elements of the matrixes of elastic piezoelectric and dielectric constants for some crystal classes used in ultrasonics, such as Quartz (class 32), niobate lithium LiN bO3 (class 3m), sulphide cadmium CdS (class 6mm) and polarized ceramics (class 6mm). → − In the absence of the conductance current j and free charges ρ∗ , the solution to the equations of motion (2.7) and Maxwell’s (2.1) determines the behavior of waves due to coupled electro-magneto-elastic eﬀects, i.e. elastic waves accompanied by electric ﬁeld, and electromagnetic waves accompanied by deformation of the medium. If we assume that the velocity of elastic waves → propagation is − υ , the corresponding velocity of an electromagnetic wave c will be of order 10υ 5 and therefore in the case of the elastic waves we can neglect the magnetic ﬁeld generated by electricity. Hence, for important real-world problems related with the analysis of the dynamics of piezoelectric transducers and the propagation of electro-acoustic waves, the magnetic eﬀects are neglected; application of the quasi-static approximation for an electric ﬁeld, gives → − → − → − ∂B ∼ div D = 0. (2.23) rot E = − = 0, ∂t Based on the above assumptions the electric ﬁeld strength Ei is expressed in terms of scalar potential φ as Ei = −∂i φ

(2.24)

c12 c11 c12 . . .

c12 c12 c11 . . .

. . . c44 . .

. . . c44 . .

c12 c13 c11 c11 c13 c12 c13 c33 c13 . . . . . . . . . c66 = (c11 − c12 )/2

c11 c12 c12 . . .

c14 c14 . c44 . .

c11 c12 c13 c11 c13 c12 c13 c33 c13 c14 −c14 . . . . . . . c66 = (c11 − c12 )/2

Matrix of electric constants caβ

. . . . c44 .

. . . . c44 .

. . . . c44 c14

. . . . . c44

. . . . . c66

. . . . c14 c66

. . . . −e41 −e41

. . . . . .

. . . . e51 −e22

−e22 e22 . e51 . .

Crystals with cubic . . . e41 . .

symmetry (Class ¯ 43m) . . . . . . . . e41 . . e41

Crystals with hexagonal symmetry (Class 6mm) . . e13 . . e13 . . e33 . e31 . e51 . . . . .

e11 −e11 . e41 . .

Matrix of piezoelectric constants eai Crystals with triangular symmetry (Class 32, 3m) e13 e13 e33 . . .

11 . .

11 . .

11 . .

. 11 .

. 11 .

. 11 .

. . 11

. . 33

. . 33

Matrix of electric constants ik

Table 2.1. The non-zero elements of the matrixes of elastic piezoelectric and dielectric constants for some crystal classes used in ultrasonics

70

2 Basic Equations of the Linear Electroelasticity

The complete set of equations for describing a linear piezoelectric medium is acquired by inserting the equation of state (2.18) into the (2.7) and the equation of electrostatics ∂i Di = 0. Expressions of mechanical stresses and electric inductions allowing for (2.24) will have the form σij = cE ijk ∂ uk + ekij ∂k φ, Di = eik ∂ uk −

εik

(2.25)

∂k φ.

Inserting (2.25) into the equations of motion (2.7) and the equation of electrostatics we obtain the coupled system of solvable equations in the framework of linear electroelasticity: ∂ 2 ui , ∂ t2 ∂k ∂i φ = 0.

cE ijk ∂ ∂j uk + ekij ∂k ∂j φ = ρ eik ∂ ∂i uk − εik

(2.26)

It should be noted that the above set of equations are suﬃcient to analyze the propagation of acoustic-electric waves in piezoelectric media of inﬁnite size. When solving the basic problem of electroelasticity, e.g. in the case of bodies with stress concentrators such as cracks, cavities and inclusions it is necessary to consider the system (2.26) together with the corresponding boundary conditions referring to mechanical and electric quantities. The method of singular integral equations used for the determination of conjugate electric and elastic ﬁelds in the above mentioned problems assumes the knowledge of the fundamental solutions of the (2.26). Then it is possible to construct integral representations of the solutions that determine the connection between boundary values of the sought-for functions and their values in the body area. However, for piezocrystals possessing common classes of symmetry the determination of the the corresponding fundamental solutions of the system (2.26) becomes a rather diﬃcult mathematical-task.

2.2 Equations of State for Piezoelectric Ceramics The piezoelectric ceramics possess a series of remarkable properties and in some cases appear to be preferable to natural piezoelectric crystals. The essential advantage of the piezoelectric ceramics lies in the manufacturing process; depending on the transducer diﬀerent geometric shapes, can be made. In their initial state the piezoelectric ceramics are isotropic dielectrics which consist of polycrystal solid solution of titanite barium and zirconate lead containing as an adhesive polymeric glass phase. In that state polycrystal ceramics reveal a higher symmetry when compared with the symmetry of separate crystals. In order to make the ceramics piezoactive it is necessary to polarize them at a temperature below the Curie point [250]. After the removal of the electric ﬁeld and the cooling of the material the polarization

2.2 Equations of State for Piezoelectric Ceramics

71

is preserved. This is due to the orientation of the polarization directions of the domains along the external ﬁeld. Due to the preliminary polarization the polycrystal ceramics turn into piezoelectricones with mechanical and electric properties which are characteristic features of the materials of transversal and isotropic symmetry. A rigorous derivation of the deﬁning relations for polarized piezoelectric ceramics is given as an example in [102, 122, 220]. These are obtained from general laws of motion for deforming polarizing media interacting with the electromagnetic ﬁelds. The linear equations of the state of piezoelectric ceramics polarized in the direction of the x3 axis (in Cartesian coordinates) have the form of the corresponding equations for a piezocrystal of hexagonal symmetry in 6mm (the optical axis coincides with the x3 - axis): E E σ11 = cE 11 ε11 + c12 ε22 + c13 ε33 − e31 E3 ,

(2.27)

E E σ22 = cE 12 ε11 + c11 ε22 + c13 ε33 − e31 E3 , E σ33 = cE 13 (ε11 + ε22 ) + c33 ε33 − e33 E3 ,

σ23 = 2cE 44 ε23 − e15 E2 , σ13 = 2cE 44 ε13 − e15 E1 , E σ12 = c11 − cE 12 ε12 , D1 =ε11 E1 + 2e15 ε13 , D2 =ε11 E2 + 2e15 ε23 , D3 =E 33 E3 + e31 (ε11 + ε22 ) + e33 ε33 Under this framework the mechanical, dielectric and piezoelectric properties of the ceramics are determined by a set of ﬁve moduli of elasticity E E E E ε ε cE 11 , c12 , c13 , c33 , c44 , two dielectric permittivities 11 , 33 and three piezoelectric constants e31 , e33 , e15 . We should note that the (2.27) describing the piezoeﬀect take into account additional electroelastic ﬁelds in preliminarily polarized ceramics which appear under the inﬂuence of the given mechanical and electric load. If we consider a homogeneous distribution of the ﬁeld of preliminary polarization inside of the body volume, then the above equations uniquely depict the functional associations. Otherwise the material factors in (2.27) should be considered as coordinate functions xi (i = 1, 2, 3). The equations of the state analogous to (2.27) may also be represented by relations (2.17) as D D σ11 = cD 11 ε11 + c12 ε22 + c13 ε33 − h31 D3 ,

σ22 = σ33 =

D cD 12 ε11 + c11 ε22 cD 13 (ε11 + ε22 )

+ +

σ23 = 2cD 44 ε23 − h15 D2 , D σ12 = c11 − cD 12 ε12 , E2 = −2h15 ε23 +

cD 13 ε33 cD 33 ε33

ε β11 D2 ,

(2.28)

− h31 D3 , − h33 D3 ,

σ13 = 2cD 44 ε13 − h15 D1 , ε E1 = −2h15 ε13 + β11 D1 ,

ε E3 = −h31 (ε11 + ε22 ) − h33 ε33 + β33 D3 .

72

2 Basic Equations of the Linear Electroelasticity

Table 2.2. The values of material parameters for most ceramics, taken from [140] Piezoceramic PZT 65/35 cE 11 cE 12 cE 33 cE 44 cE 66

= 1, 594 · 1011 P a = 7, 385 · 1010 P a = 1, 261 · 1011 P a = 3, 89 · 1010 P a = 4, 276 · 1010 P a

e31 = −6, 127cal/m2 e33 = 10, 71cal/m2 e15 = 8, 387cal/m2

cE 11 cE 13 cE 33 cE 44

= 11, 22 · 1010 N/m2 = 6, 22 · 1010 N/m2 = 10, 6 · 1010 N/m2 = 2, 49 · 1010 N/m2

cE 11 cE 12 cE 13 cE 33 cE 44 cE 66

= 13, 9 · 1010 N/m2 = 7, 78 · 1010 N/m2 = 7, 43 · 1010 N/m2 = 11, 5 · 1010 N/m2 = 2, 56 · 1010 N/m2 = 3, 06 · 1010 N/m2

E S11 E S12 E S13 E S33 E S44 E S66

= 12, 3 · 10−12 m2 /N = −4, 05 · 10−12 m2 /N = −5, 31 · 10−12 m2 /N = 15, 5 · 10−12 m2 /N = 39, 5 · 10−12 m2 /N = 32, 7 · 10−12 m2 /N

11 = 5, 66 · 10−9 F/m 33 = 2, 243 · 10−9 F/m

Piezoceramic VTC-19 e31 = −3, 4cal/m2 e33 = 15, 1cal/m2 e15 = 9, 45cal/m2

11 = 7, 257 · 10−9 F/m 33 = 8, 274 · 10−9 F/m

Piezoceramic PZT-4 e31 = −5, 2cal/m2 e33 = 15, 1cal/m2 e15 = 12, 7cal/m2

11 = 6, 45 · 10−9 F/m 33 = 5, 62 · 10−9 F/m

d31 = 1, 23 · 10−10 cal/N d33 = 2, 89 · 10−10 cal/N d15 = 4, 96 · 10−10 cal/N

Here εij = 12 (∂j ui + ∂i uj ) are the components of the tensors of small deforε mations; cD ij , βkm and hlm are the moduli of elasticity at a constant electric induction, the dielectric “impermittivities” at ﬁxed deformations and constants of piezoelectric connectivity respectively. Table 2.2 gives the values of the material parameters for the most wide-spread piezoelectric ceramics, taken out of [140].

2.3 Two-Dimensional Problems of Electroelasticity Let us consider the analysis of the diﬀerential (2.26) for diﬀerent crystallographic classes in order to reveal the conditions under which it is possible to write down the plane problem of electroelasticity. Suppose that one of the components of the vector of elastic displacement is equal to zero, but all the other components of mechanical and electric ﬁelds do not depend on the corresponding coordinate, i.e. uα = 0,

∂ =0 ∂ xα

(α = 1, 2, 3) .

2.3 Two-Dimensional Problems of Electroelasticity

73

Then the conditions of solution existence to the plane problem are zreduced to the following equalities cαβββ = cαββγ = cαβγγ = cαγββ = cαγβγ = cαγγγ = 0, (2.29) γ = α, β = γ (α, β, γ = 1, 2, 3) . eβαβ = eβαγ = eγαγ = 0, Assuming that u2 = 0, ∂/∂x2 = 0 conditions (2.29) will be applied to class 2mm of rhombic system, classes 4mm of square system and class 6mm, 6m2 of hexagonal symmetry. For these classes the dynamic equations of the plane problem of electroelasticity allowing for matrix symbols are given by: E 2 ∗ ∗ 2 (2.30) cE 11 ∂1 u1 + c13 + c55 ∂1 ∂3 u3 + c55 ∂3 u1 + + e∗11 ∂12 φ + (e∗13 + e∗15 ) ∂1 ∂3 φ = ρ E 2 ∗ ∗ 2 cE 33 ∂3 u3 + c13 + c55 ∂1 ∂3 u1 + c55 ∂1 u3 + + e∗15 ∂12 φ + e∗33 ∂32 φ = ρ

∂ 2 u1 , ∂ t2

∂ 2 u3 , ∂ t2

2 ∗ ∗ ∗ 2 eE 11 ∂1 u1 + (e13 + e15 ) ∂1 ∂3 u1 + e33 ∂3 u3 +

+ e∗13 ∂12 u3 − ε11 ∂12 φ− ε33 ∂32 φ = 0. Here ui = ui (x1 , x3 ) are the vector components of the mechanic displacement, φ = φ (x1 , x3 ) is the electric potential. Table 2.3 gives the values of the factors-marked with asterisks- for diﬀerent classes of symmetry. From (2.30) and Table 2.3 it follows that in the case of the deformation of a rhombic symmetry crystal of class 2mm the equations referring to elastic and electric ﬁelds are separated; however for class 4mm of the tetragonal system and for class 6mm of the hexagonal system they coincide. Assuming that u3 = 0, ∂/∂x3 = 0 the equations of the plane problem of electroelasticity are available for 422 class of tetragonal symmetry and for 6, Table 2.3. The values of factors for diﬀerent classes of symmetry

c∗55 e∗11 e∗13 e∗15 e∗33

Rhombic System 2mm

Square System 4mm

Hexagonal System ¯ 6mm 6m2

c55 0 0 0 0

c44 0 e13 e15 e33

c44 0 e13 e15 e33

c44 e11 0 0 0

74

2 Basic Equations of the Linear Electroelasticity

622, 6m2 classes of hexagonal symmetry and they may be presented in the following form: E 2 E E 2 cE (2.31) 11 ∂1 u1 + c12 + c66 ∂1 ∂2 u2 + c66 ∂2 u1 + ∂ 2 u1 + e∗11 ∂12 φ − 3e∗22 ∂1 ∂2 φ − 2e∗11 ∂22 φ = ρ 2 , ∂t E 2 E E 2 ∂ ∂ u + c + c ∂ u + c ∂ u + cE 1 1 2 1 2 11 2 12 66 66 1 ∂ 2 u2 , ∂ t2 ∗ 2 ∗ ∗ 2 ∗ 2 e11 ∂1 u1 − 3e22 ∂1 ∂2 u1 − 2e11 ∂2 u1 + e22 ∂2 u2 − − 3e∗11 ∂1 ∂2 u2 − 2e∗22 ∂12 u2 − ε11 ∂12 φ + ∂22 φ = 0, + e∗22 ∂22 φ − 3e∗11 ∂1 ∂2 φ − 2e∗22 ∂12 φ = ρ

The values of the coeﬃcients e∗11 ,e∗22 for the above-mentioned classes of symmetry are given in Table 2.4. Furthermore let us consider the possibility of the problem statement of antiplane deformation for piezoelectric media. Conditions of solution existence in case of antiplane deformation lead to the following requirements: cααγα = cααγβ = cββγα = cββγβ = cαβγα = cαβγβ = 0, eααα = eααβ = eαββ = eββα = eβββ = 0,

α = β,

(2.32) β = γ.

Let the vector of displacement be u = (0, 0, u3 (x1 , x2 )) and ∂/∂x3 = 0. Then the conditions given in (2.32) apply in the case of 222 and 2mm of classes of rhombic symmetry, for 4, ¯ 4, ¯ 42m, 422 and 4mm classes of tetragonal symmetry, for classes 6,622,6mm of hexagonal symmetry and for all classes of the cubic system. The corresponding equations of antiplane problem of electroelasticity for these classes have the following form: 2 ∗ 2 c∗55 ∂12 u3 + cE 44 ∂2 u3 + e15 ∂1 φ+

(2.33) 2

∂ u3 , ∂ t2 e∗15 ∂12 u3 + (e∗14 + e∗25 ) ∂1 ∂2 u3 + e∗24 ∂22 u3 − + e∗24 ∂22 φ + (e∗14 + e∗25 ) ∂1 ∂2 φ = ρ

− ε11 ∂12 φ− ∗22 ∂22 φ = 0, where the values of the factors marked with asterisks for the mentioned classes of symmetry are given in Table 2.5. Table 2.4. The values of the coeﬃcients e∗11 and e∗22 for some symmetry classes

c∗11 e∗22

Square System, Class 422

Hexagonal System Class 622

Class ¯ 6

Class 6m2

0 0

0 0

e11 e33

e11 0

2.4 Boundary Conditions

75

Table 2.5. The values of the factors marked with asterisks for the mentioned classes of symmetry

c∗55 e∗14 e∗15 e∗24 e∗25 ∗22

Rhombic System 222 2mm

Square System ¯ 4 4

¯ 42mm

4mm

422

cE 55

cE 44

cE 44

cE 44

cE 44 0 0 0 0 11

cE 55

e14 0 0 e25 22

0 e15 e24 0 22

0 e15 e15 0 11

Square System cE 55 e∗14 e∗15 e∗24 e∗25 ∗22

cE 44

cE 44 e14 0 0 e14 11

e14 e15 −e15 e14 11

e14 0 0 e14 11

0 e15 e15 0 11

Hexagonal System 6

622

6mm

cE 44 0 e15 e15 0 11

cE 44 0 0 0 0 11

cE 44 0 e15 e15 0 11

Table 2.6. The values of constants c∗66 , e∗36 and ∗33 for some symmetry classes

c∗66 e∗36 ∗33

222

422

¯ 42m

622

Cubic System

cE 66 e36 33

cE 66 0 33

cE 66 0 33

cE 66 0 33

cE 44 eE 14 11

If the vector of the elastic ﬁeld is u = {0, u2 (x1 , x3 , t) , 0} and ∂/∂x2 = 0, the antiplane problem statement is feasible only for classes 222 of rhombic symmetry, for classes 422, ¯ 42m of tetragonal symmetry, for all cubic symmetries and for class 662 of hexagonal system. The corresponding equations for the given classes may be written as follows ∂ 2 u2 , ∂ t2 ∂32 φ = 0.

2 ∗ c∗66 ∂12 u2 + cE 44 ∂3 u2 + (e14 + e36 ) ∂1 ∂3 φ = ρ

(e14 + e∗36 ) ∂1 ∂3 u2 − ε11 ∂12 φ− ∗33

(2.34)

In Table 2.6 are indicated values of the constants c∗66 , e∗36 , ∗33 .

2.4 Boundary Conditions In the problems of electroelasticity, boundary conditions may be conventionally categorized into two groups: the mechanical and the electric ones. If the piezoelectric medium occupies the volume V surrounded by the surface S the

76

2 Basic Equations of the Linear Electroelasticity

mechanical boundary conditions are the ones of the classical elasticity σij nj = qi on Sσ ,

ui = u∗i on S\Sσ ,

(2.35)

where nj is a single normal to S; Sσ is a part of the surface S on which external load qi is assigned. Considering the electric boundary conditions in the general case when the surface of the piezoelectric body is contiguous with the external medium it is necessary to join the Maxwell’s equation for the given medium to the (2.26). Also we should take into account the continuity of the tangential component → − of the vector of the electric ﬁeld strength E and that of the normal component → − of the vector of the electric induction D on S (when these are no free electric charges at the interface of the two media). In the particular case where the external medium is associated with vacuum (the dielectric permittivity 0 of which is considerably smaller than the constants ij for the majority of piezoelectric materials) the condition of continuity for the normal component of the vector Di is approximated by Di ni ≈ 0 on S.

(2.36)

For polarized piezoceramics we have that ε11 / 0 = 700–1000, ε33 / 0 = 700–850; therefore, when the surrounding medium is the vacuum (air) it is possible to use the approximate boundary condition given by (2.36). It is evident that the form of the electric boundary conditions is related with the supplied electric energy to the piezoelement. If for example, the parts Sφ of the surface S are covered with electrodes which are supplied with an outlet potential ±V0 ei t from a voltage generator, the electric boundary conditions on Sφ read (2.37) φ|Sφ = ±V0 eiωt . In a case where there is a crack in the piezoelectric body which is modelled by the mathematical section L it is natural to consider the conditions of continuity of the electric potential φ and of the normal component of the vector of electric induction Dn = Dj nj on L φ+ = φ− ,

Dn+ = Dn− .

(2.38)

Here the signs “plus” and “minus” correspond to the left and right lips of the crack L respectively, along the movement from the beginning a to end b. It should be noted that in the presence real crack-like defects, which under the eﬀect of mechanical and electric loads actually lead to failure of the piezoelectric body, the ﬁrst condition in (2.38) is not always applicable. To prove this statement let us consider the solution of the elementary plane problem for the distribution of an electric ﬁeld in a isotropic dielectric

2.4 Boundary Conditions

77

with elliptic hole under the inﬂuence of a static electric ﬁeld E0 at inﬁnity. Introducing elliptic coordinates ξ, η with the help of the ratio x1 + ix2 = ch (ξ + iη) ,

0 ≤ ξ ≤ ∞,

−π < η < π,

The solution to the two-dimensional equations of electrostatics for the dielectric region (ξ0 < ξ < ∞) with dielectric permittivity 1 and for the opening (0 ≤ ξ ≤ ξ0 ) with dielectric constant of the vacuum 0 is given by φ1 (ξ, ξ0 , η) = −E0 shξ sin η −

(1 − λ) E0 eξ0 chξ0 −ξ e sin η λcthξ0 + 1

(ξ0 < ξ < ∞) , (2.39)

φ0 (ξ, ξ0 , η) = −

ξ0

E0 e shξ sin η (0 ≤ ξ ≤ ξ0 ) , λchξ0 + shξ0

λ = 0 /1 .

The formulas are derived by applying the continuity conditions for the normal vector component of the electric induction and for the tangent component of the electric ﬁeld strength on the dielectric boundary and the vacuum. Besides, for the opening region it is assumed that φ0 (0, ξ0 , η) = φ0 (0, −ξ0 , η) ,

∂ φ0 (ξ, ξ0 , η)

∂ φ0 (ξ, ξ0 , −η)

= − .

∂ξ ∂ξ ξ=0 ξ=0

Using (2.39), the potential jump on the edges of the open crack is given by (1 − λ) chξ0 φ1 (ξ0 , ξ0 , η) − φ1 (ξ0 , ξ0 , −η) = −2E0 sin η shξ0 + . (2.40) λcthξ0 + 1 From (2.40) it follows that the potential jump on the edges of the crack in the form of a narrow ellipse with semi-axis , w = thξ0 ≈ ξ0 << (2w is a maximum opening of the edges of the crack) is diﬀerent from zero even for small values ξ0 if the ratio 0 / 1 is of the order of ξ0 . In that case the value 0 / 1 cthξ0 will be comparable to unity and then at ξ0 << 1 the formula (2.40) becomes φ1 (ξ0 , ξ0 , η) − φ1 (ξ0 , ξ0 , −η) ≈

2E0 sin η . λcthξ0 + 1

(2.41)

In materials with a bigger value of the dielectric constant (in comparison with the vacuum one) the continuity condition of the electric potential on the edges of the crack is not satisﬁed. In that case the crack is approximated with a cavity ﬁlled with vacuum (air) and for the sizes we may use the condition (2.36) on the surface of an opened crack. This condition is a consequence

78

2 Basic Equations of the Linear Electroelasticity (1)

of the expression for the component of the electric ﬁeld Eξ outside of the opening region E0 sin η (1 − λ) chξ0 e−(ξ−ξ0 ) (1) Eξ (ξ, ξ0 , η) = chξ − . λ (cthξ0 + 1) ch2 ξ − cos2 η When 0 = 0 and ξ = ξ0 it follows that (1)

(1)

Dξ (ξ0 , ξ0 , η) =1 Eξ (ξ0 , ξ0 , η) = 0. We should also note that for 0 = 0 the potential jump on the edges of the opened crack proceeding from (2.41) is determined by the expression φ1 (ξ0 , ξ0 , η) − φ1 (ξ0 , ξ0 , −η) ∼ = −2E0 sin η.

2.5 Mechanics of Fracture of Piezoelectrics The existence of defects like cracks, cuts, narrow cavities, etc. in real materials may lead in some cases to their rapid propagation and fracture of the whole body. The mathematical theory of the cracks based on the energetic approach of Griﬃth appeared to be very successful for the theoretic studies of diﬀerent aspects of the process of fracture and for the development of practical methods of ﬁrmness analysis of the elements of the constructions. At present, a substantial progress is achieved on the investigation of materials fracture under the action of mechanical and thermal loads. However, the fracture of materials with coupled ﬁelds of diﬀerent nature (e.g. elastic, thermal and electric) is not well-studied yet. Hence, the generalization of the method of fracture mechanics on piezoelectric materials is of great interest. The most important issue in the theory of cracks is the formulation of the condition of the local fracture at a given point of the crack contour. For example, this condition can be obtained as an outcome from the determination of energy ﬂow during the formation of a new breakage surface. Let us consider two deformed conditions of the piezoelectric body V having a crack of an arbitrary form. Suppose that there are no volume forces and free (0) (0) (0) charges in the piezoelectric. Let σij , εij , ui , φ(0) be components of stress and deformation tensors, displacement vector and also electric potential in (1) (1) (1) some initial condition of the body “0”, while σij , εij , ui , φ(1) are the corresponding quantities in the condition “1” where the double-sided surface of the crack gets an increment ΔΣ. The expression for the internal energy of a piezoelectric body in the conditions “0” and “1” [14, 140, 141, 142, 251, 252, 254] is 1 (k) (k) (k) (k) σij εij + Ej Dj dV (k = 0, 1) (2.42) u(k) = 2 V

2.5 Mechanics of Fracture of Piezoelectrics

79

The increase of the internal energy at transition from the condition “0” into the condition “1” reads 1 (1) (1) (0) (0) (1) (1) (0) (0) σij εij − σij εij + Ej Dj − Ej Dj dV ΔU = 2 V 1 (1) (0) (1) (0) (1) (0) (1) (0) = σij + σij εij − εij + Ej + Ej Dj − Dj dV 2 V 1 (0) (1) (0) (1) (1) (0) (1) (0) σij εij + Ej Dj − σij εij − Ej Dj dV. (2.43) − 2 V

Allowing for the reciprocity relation (0) (1)

(0)

(1)

σij εij + Ej Dj

(1) (0)

(1)

(0)

= σij εij + Ej Dj ,

(2.44)

we transform (2.43) as follows 1 (1) (0) (1) (0) (1) (0) (1) (0) σij + σij εij − εij + Ej + Ej Dj − Dj dV ΔU = 2 V 1 (1) (0) (1) (0) ∂j σij + σij ui − ui = 2 V (1) (0) − ∂j Dj − Dj φ(1) + φ(0) dV 1 (1) (0) (1) (0) = σij + σij ui − ui 2 Σ+ΔΣ (1) (0) − Dj − Dj φ(1) + φ(0) nj dS. Here it is taken into account that (k)

∂j σij = 0,

(k)

∂i Di

= 0,

(k)

Ej

= −∂j φ(k)

(k = 0, 1) .

The last equality may be written in the following form

1 (0) (1) (1) (0) (1) (0) ΔU = ΔAΣ + σij u1 − σij uj − Dj φ(0) + Dj φ(1) nj dS+ 2 Σ 1 (1) (0) (1) (0) + σij + σij u1 − ui nj dS 2 ΔΣ 1 (1) (0) Dj − Dj φ(1) + φ(0) nj dS, (2.45) − 2 ΔΣ

80

2 Basic Equations of the Linear Electroelasticity

where ΔAΣ =

1 2

(1) (1)

σij ui

Σ

1 (0) (0) (1) (0) σij ui − Dj φ(0) nj dS − Dj φ(1) nj dS − 2 Σ

the increment of the internal force and electric ﬁeld work on the surface Σ. Using the reciprocity relation (2.44) it is easy to show that

(0) (1) (1) (0) (1) (0) σij ui − σij ui − Dj φ(0) + Dj φ(1) nj dS = 0. Σ (0)

(0)

(0)

Besides, taking into account ui , σij , φ(0) , Di we have (0) (0) (0) σij ui nj dS = 0, Dj φ(0) nj dS = 0. ΔΣ

ΔΣ

Thus provided that no mechanical loads are applied on the crack surface (1) (σij = 0 on ΔΣ) we obtain ΔU = ΔAΣ + ΔAΔΣ , where ΔAΔΣ

1 = 2

ΔΣ

(0) (1) σij ui

+

(0) Dj φ(1)

1 nj dS − 2

(2.46)

(1)

Dj

φ(1) + φ(0) nj dS.

ΔΣ

(2.47) The value ΔAΔΣ , which appears in the expression (2.46) for the increment of the internal energy at transition of the piezoelectric body from condition “0” to condition “1”, deﬁnes the energy ﬂow during the formation of the breakage ΔΣ, the integration in (2.47) taking place in two surfaces ΔΣ1 , and ΔΣ2 of the additional breakage and the normal directions to ΔΣ1 and ΔΣ2 are directed inside the crack. Using (2.47) the condition of propagation of the crack is given by γ (ΔΣ1 + ΔΣ2 ) = −ΔAΔΣ ,

(2.48)

where γ is the density of the surface energy. Integrating along the double-sided surface ΔΣ in (2.47) we get-considering (0) (0) the continuity of φ(0) , σij , Dj on ΔΣ-the following expression 1 1 (0) (1)+ (1)− (0) dS + σij nj uj − uj Dj nj φ(1)+ − φ(1)− dS ΔAΔΣ = 2 2 ΔΣ1 ΔΣ1 1 (1)+ (1)− Dj φ(1)+ − Dj φ(1)− nj dS − 2 ΔΣ1 1 (1)+ (1)− Dj nj φ(0) dS. − Dj (2.49) − 2 ΔΣ1

2.5 Mechanics of Fracture of Piezoelectrics

81

where the signs “±” correspond to the limiting values of the quantities on the double-sided surface ΔΣ, while the integration takes on one side ΔΣ. The formulation of the criterion for a crack spreading in a piezoelectric medium seems to depend on the type of electric boundary conditions on crack surfaces. When a crack is considered as a mathematical surface (line) allowing for the conditions of the continuity of the electric potential φ(1) and the (1) normal component of the electric induction vector Dj nj on the surface ΔΣ we get the following expression giving the energy ﬂow during the breakage forming: 1 (0) (1)+ (1)− dS. (2.50) σij nj ui − ui ΔAΔΣ = 2

(1) (1) (1) ui , φi , Dj

ΔΣ

In this case the condition (2.48) takes the form 1 1 (0) (1)+ 2γ = − im σij nj ui − u(1)− dS. 2 ΔΣ1 →0 ΔΣ1

(2.51)

ΔΣ1

Therefore, allowing for the continuity of the electric potential and of the normal component of the electric induction vector on the crack surface the condition of the local fracture for the piezoelectric medium coincides with the known condition of the fracture in elastic bodies [140, 141]. For piezoelectric materials such as polarized piezoceramics on the edges of the opened crack an electric potential jump appears. Therefore for cracks (1) in piezoceramics it is possible to use the approximate condition Dj nj = 0 on ΔΣ1 . In this case, using (2.48), (2.49) we obtain 1 1 (0) (1)+ (1)− σij nj ui (2.52) 2γ = − im − ui 2 ΔΣ1 →0 ΔΣ1 ΔΣ1 (0) + Dj nj φ(1)+ − φ(1)− dS. It is known that in the small vicinity of an arbitrary point of the crack contour the medium is in the conditions of a plane state; in addition it is possible to consider the crack as a semi-inﬁnite and plane (linear). And corresponding asymptotic representations are valid for stresses, displacements and electric potentials. Let a piezoelectric medium refer to an arbitrary orientated system of the Cartesian coordinate system xk (k = 1, 2, 3) and the linear crack 2 (|x1 | < ) in length is situated in the x2 = 0. Assuming that the electroelastic condition (a) does not depend on the x3 - coordinate, and that on the edges of the crack, (b) no mechanical load is applied and

82

2 Basic Equations of the Linear Electroelasticity

∼ 0 is satisﬁed (c) the approximate equation Dj nj = the condition of a crack propagation (2.52) reads 1 1 2γ = im 2 Δ→0 Δ

+Δ

+ σi2 (x1 , 0, ) [ui (x1 , 0, + Δ)]

(2.53)

+D2+ (x1 , 0, ) [φ (x1 , 0, + Δ)] dx1 . Here σi2 (x1 , 0, ) , D2+ (x1 , 0, ) are stress components and a normal component of the electric induction vector on the extension of the crack 2 in length; [ui ] , [φ] are jumps of the displacement vector and of electric potential on the crack 2 ( + Δ) in length. It should be noted that the second term of the right-hand side in (2.53) is equal to zero if we accept the condition of the continuity of the electric potential on the crack edges. It is known that a crack edge is a peculiar discharge area for released energy that is distributed along the crack contour. Due to [196] we introduce the energy discharge density vector Γ = (Γ1 , Γ2 ) for piezoelectric medium considering a static and plane problem. The components Γk (k = 1, 2) of this vector are determined by the following expressions (2.54) Γk = [Hnk − σij ni ∂k uj + Di ni Ek ] dS, c

where c is an arbitrary closed contour surrounding the crack tip, H = U −Ei Di is an electric enthalpy, nk are the components of the unit normal vector to c. We will now show that the integrals Γk do not depend on the choice of the contour c, if on the crack edges the conditions σij nj = 0, Dj nj = 0 apply. Let us consider the integral Γ1 of the closed contour consisting of arbitrary curves c, c1 and linear regions on the crack edges (Fig. 2.1). Taking into account the fact that the sub-integral expression in (2.54) is equal to zero on the crack edges and using the equality ∂j σij = 0,

∂i Di = 0,

∂k H = σij ∂k εij − Di ∂k Ei ,

Fig. 2.1. Paths of integration for the Γk integral

2.5 Mechanics of Fracture of Piezoelectrics

we ﬁnd that

Γ1 |c − Γ1 |c1 =

83

[Hn1 − σij ni ∂1 uj + Di ni E1 ]dS = c1 +c

[∂1 H − ∂i (σij ∂1 uj ) + ∂i (Di E1 )]dx1 dx2 =

= D

[σij ∂1 εij − Di ∂1 Ei − ∂i σij ∂1 uj − σij ∂1 ∂i uj + E1 ∂i Di

=

(2.55)

D

+Di ∂i E1 ] dx1 dx2 = 0. In the same way it is possible to show that the integral Γ2 does not depend on the choice of the contour c. If the development of a crack in a piezoelectric medium occurs in its initial plane x2 = 0 the condition of fracture takes the form Γ1 = 2γ.

(2.56)

In the general case of an anisotropic material the quantity 2γ appears to depend on the position of the point O and on the orientation of the crack plane at that point. For a crack which deviates at an angle θ from its initial position the energy discharge is equal to the vector projection Γ on the direction of the crack growth. In this case the criterion determining the beginning of the crack development is given by Γ1 cos θ + Γ2 sin θ = 2γ (θ) , where γ (θ) is an experimentally determined quantity.

(2.57)

This page intentionally blank

3 Static Problems of Electroelasticity for Bimorphs with Stress Concentrators

In this chapter we study some two-dimensional static problems of electroelasticity for piezoceramic bimorphs weakened by defects of crack and opening type. The term bimorph implies a cylindrical body consisting of two continuously connected, along the common part of the side surface, heterogeneous cylindrical bodies. Such piecewise-uniform bodies are the compound plates consisting of two heterogeneous halfplates continuously connected along their plane boundary. Construction of the analogous algorithms is fulﬁlled by application of complex solution representations allowing us to reveal the singularities of ﬁeld quantities in the vicinity of the crack tips. By assuming the former we reduce the corresponding boundary problems of electroelasticity to systems of singular integral equations.

3.1 Complex Representations of Solutions in Two-Dimensions Let us consider a piezoceramic medium in a Cartesian system of Ox1 x2 x3 coordinates and, in that case, let x3 - axis be directed along the force lines of the electric ﬁeld of the preliminarily polarization of the ceramics. Then, the linear equations of piezoeﬀect may be represented, in the form of [115, 140], as well as in other forms [25] ε11 = s11 σ11 + s12 σ22 + s13 σ33 + d31 E3 , ε22 = s12 σ11 + s11 σ22 + s13 σ33 + d31 E3 , ε33 = s13 (σ11 + σ22 ) + s13 σ33 + d33 E3 , 2ε23 = s44 σ23 + d15 E2 , 2ε13 = s44 σ13 + d15 E1 , 2ε12 = s66 σ12 = 2 (s11 − s12 ) σ12 , D2 =11 E2 + d15 σ23 ,

D1 =11 E1 + d15 σ13 ,

D3 = e33 E3 + d31 (σ11 + σ22 ) + d33 σ33 .

(3.1)

86

3 Static Problems

E Here s11 = sE 11 , . . . , s44 = s44 are the elastic compliances determined at a constant value of the electric ﬁeld; d31 , d15 , d33 are the piezoelectric constants and 11 =σ11 , 33 =σ33 are the dielectric permitivities deﬁned at constant values of the mechanical stress; Ej and Dj (j = 1, 2, 3) are the components of strength vector and electric ﬁeld induction directed along xj - axis, respectively. Here we should note that relations (3.1) coincide with the corresponding relations for the crystal in the hexagonal system 6mm [25] with optic. Apart from the state (3.1), there are available the equations of equilibrium ∂j σij = 0 (in the absence of volume forces), the Cauchy relations εij = 0.5 (∂i uj + ∂j ui ), the conditions of deformation compatibility [134] and → − → − the electrostatic equations, rot E = 0, div D = 0 [167]. Let us seek a solution of the electroelasticity equation that doesn’t depend on coordinate x2 . Assuming in (3.1) that the deformation ε22 = 0 and in→ − troducing the electrostatic potential E = −gradφ and the functions of stress ϕ1 , ϕ3 given by (∂m = ∂/∂xm )

σ11 = ∂32 ϕ1 ,

σ33 = ∂12 ϕ1 ,

σ12 = ∂3 ϕ3 ,

σ23 = −∂1 ϕ3 ,

σ13 = −∂1 ∂3 ϕ1 ,

we write ε11 = s∗11 ∂32 ϕ1 + s∗13 ∂12 ϕ1 − d∗31 ∂3 φ,

ε12 = (s11 − s12 ) ∂3 ϕ3 ,

ε33 = s∗13 ∂32 ϕ1 + s∗33 ∂12 ϕ1 − d∗33 ∂3 φ, 2ε13 = −s44 ∂1 ∂3 ϕ1 − d15 ∂1 φ, D1 = −d15 ∂1 ∂3 ϕ1 − 11 ∂1 φ,

(3.2)

2ε23 = −s44 ∂1 ϕ3 , D2 = −d15 ∂1 ϕ3 ,

D3 = d∗31 ∂32 ϕ1 + d∗33 ∂12 ϕ1 − ∗33 ∂3 φ, where s212 s2 s12 ∗ = s11 − , s13 = s13 1 − , s∗33 = s33 − 13 , s11 s11 s11 s13 d2 s12 d∗31 = d31 1 − , ∗33 =33 − 31 . , d∗33 = d33 − d31 s11 s11 s11 s∗11

In that case the equations of equilibrium are satisﬁed identically. In conditions of deformation compatibility, only two of the independent relations remain, namely ∂32 ε11 + ∂12 ε33 = 2∂1 ∂3 ε13 ,

∂3 ε21 − ∂1 ε23 = 0.

(3.3)

→ − Substituting into (3.3) (and also into electrostatic equation div D = 0) the expressions of deformations and the components of the electric induction

3.1 Complex Representations of Solutions in Two-Dimensions

87

vector from (3.2) we arrive at the following system of diﬀerential equations (summarizing over index j) lij ϕj = 0, l11 =

s∗33 ∂14

l12 = l21 =

l33 ϕ3 = 0

(i, j = 1, 2) ,

+ (s44 + 2s∗13 ) ∂12 ∂32 + s∗11 ∂34 , (d15 − d∗33 ) ∂12 ∂3 − d∗31 ∂33 , ϕ2

l22 =11 ∂12 +

∗33

∂32 ,

l33 =

s44 ∂12

(3.4) = φ,

+ 2 (s11 − s12 ) ∂32 .

Thus, the state of plane and antiplane deformation in transverse isotropic piezoceramic medium is separated, and the mechanical and electric ﬁelds can be coupled only in the ﬁrst case. Let us now consider the problem of plane deformation in the Cartesian coordinates Ox1 x2 x3 of a piezoceramic medium with the direction of preliminary polarization along Ox3 -axis. The plane of deformation is the x1 Ox3 -plane. The density of inner energy of the piezoelectric medium is given by U=

1 (σij εij + Di Ei ) 2

(i, j = 1, 2, 3)

Its physical meaning is related to the positively deﬁned quadrature form of variables σij and Em . Therefore the system of equations ij ϕj = 0 in (3.4) is elliptic. Introducing the solvability function V (x1 , x3 ) by the formulas ϕ1 = l22 V,

ϕ2 = −l12 V,

(3.5)

the system of (3.4) is given by the following 6-th order homogeneous diﬀerential equation 2 V = 0. (3.6) l11 l22 − l12 The general real solution of this equation reads V (x1 , x3 ) = 2Re

3

fk (zk ) , zk = x1 + μk x3 ,

(3.7)

k=1

where μk are the roots of the characteristic equation ∗ s33 + (s44 + 2s∗13 ) μ2 + s∗11 μ4 11 + ∗33 μ2 − 2 − μ2 d15 − d∗33 − d∗31 μ2 = 0.

(3.8)

In the case of plane stressed state and plane deformation the roots μk (k = 1, 2, 3) of (3.8) for some piezoceramics are given in Table A.2 (in Appendix A). System (3.4) is elliptic so it follows that Imμκ = 0. For deﬁniteness, we assume that Imμκ > 0 (k = 1, 2, 3). Formula (3.7) is valid in the case where the roots μk are simple. The functions fk (zk ) that appear in that equation are arbitrary analytical functions of zk .

88

3 Static Problems

The stress function ϕ1 and the electric potential φ = ϕ2 can be found using equalities (3.5) 3 d2 fk ϕ1 (x1 , x3 ) = 2Re γk fk (zk ), f k (zk ) = , (3.9) dzk2 k=1

ϕ2 (x1 , x3 ) = −2Re

3

λk fk (zk ) ,

k=1

γk =11 + ∗33 μ2k ,

λk = (d15 − d∗33 ) μk − d∗31 μ3k .

Then using the electrostatic equations, formulas (3.2) and stress expressions by stress function ϕ1 the components of mechanical and electric quantities [59] are given by 3 3 σ11 = 2Re γk μ2k Φk (zk ), σ33 = 2Re γk Φk (zk ), k=1

σ13 = −2Re

k=1

3

γk μk Φk (zk ),

(3.10)

k=1

E1 = 2Re D1 = 2Re

3 k=1 3

λk Φk (zk ),

E3 = 2Re

3

λk μk Φk (zk ),

k=1

rk μk Φk (zk ),

D3 = −2Re

k=1

3

rk Φk (zk ),

k=1

rk =11 λk μ−1 k − d15 γk ,

(4)

Φk (z) = fk (z) .

We obtain components of the displacement vector by integrating the expressions for deformations in (3.2) taking into account (3.9). We have 3 3 u1 = 2Re pk ϕk (zk ), u3 = 2Re qk ϕk (zk ), k=1

k=1

pk = s∗11 γk μ2k + s∗13 γk + d∗31 λk μk , qk =

s∗33 γk μ−1 k

Φk (z) = ϕk (z) ,

(3.11)

+ s∗13 γk μk + d∗33 λk .

The main vector and the main moment of the mechanical forces, which acts at the side of positive normal on arc AB in the area occupied by the medium, read 3 B X1n ds = 2Re γk μk [ϕk (zk )]A , (3.12) X1 = AB

k=1

X3 =

X3n ds = −2Re AB

M=

3 k=1

B

γk [ϕk (zk )]A , B

(x1 X3n − x3 X1n ) ds = [ϕ1 − (x1 ∂1 ϕ1 + x3 ∂3 ϕ1 )]A . AB

3.1 Complex Representations of Solutions in Two-Dimensions

89

To formulate the electric boundary conditions it is necessary to write down the formula for the normal components of the electric induction vector Dn and the tangential of the component of electric ﬁeld strength Es vector on arc AB. Due to (3.10) we ﬁnd Dn = D1 cos ψ + D3 sin ψ = 2Re

3

ak (ψ) rk Φk (zk ),

(3.13)

k=1 3

Es = E3 cos ψ − E1 sin ψ = 2Re

ak (ψ) λk Φk (zk ),

k=1

ak (ψ) = μk cos ψ − sin ψ, where ψ is an angle between the positive normal to line AB at point (x1 , x3 ) ∈ AB and arc Ox1 (Fig. 3.1). The ﬂow of the electric induction vector AB and the circulation of the vector of the ﬁeld strength follow directly from relation (3.13) and are given by Dn ds = 2Re

3 k=1

AB

Es ds = 2Re

3 k=1

AB

B

rk [ϕk (zk )]A ,

(3.14)

B

λk [ϕk (zk )]A .

According to formulas (3.12), (3.10) the mechanical conditions of the ﬁrst basic problem on the full boundary of area Lj may be represented in the following form 2Re

3

s γk μk ϕk (ζk ) =

k=1

2Re

3

X1n (s) ds + c, 0

s γk ϕk (ζk ) = −

k=1

X3n (s) ds + c∗ ,

0

ζk = Reζ + μk Imζ,

x3

O

ζ ∈ L.

n B

ψ

A x1

Fig. 3.1. For determination of angle Ψ

(3.15)

90

3 Static Problems

Here c = {cj , ζ ∈ Lj } , c∗ = c∗j , ζ ∈ Lj are the constants determined by the solution of the boundary problem; s is the arc abscissa of the boundary contour. When the displacements g1 (ζ) , g3 (ζ) are given on the boundary of the body, the boundary conditions according to (3.11) are written as 2Re

3

pk ϕk (ζk ) = g1 (ζ) , 2Re

k=1

3

qk ϕk (ζk ) = g3 (ζ).

(3.16)

k=1

In some cases it is more convenient to represent the mechanical boundary conditions as derivatives of the function ϕk (zk ). For that it is necessary to diﬀerentiate (3.15), (3.16) along the arc coordinate of contour L. For the ﬁrst problem we have 2Re

3

γk μm k ak (ψ) Φk (ζk ) = Fm (ζ)

(m = 0, 1) ,

(3.17)

k=1

F0 (ζ) = −X3n (ζ) ,

F1 (ζ) = X1n (ζ) ,

ζ ∈ L;

while for the second basic problem: 2Re

3 k=1

(m)

pk ak (ψ) Φk (ζk ) = Fm (ζ)

(m = 0, 1),

(3.18)

dg1 dg3 , F1 (ζ) = . ds ds The electric boundary conditions are formulated as follows [115, 140]: On the electroded area of boundary L∗ the values of electric potential φ are prescribed. In that case due to (3.9) we have that (0)

pk = pk ,

(1)

pk = qk ,

2Re

3

F0 (ζ) =

λk ϕk (ζk ) = V (ζ) , ζ ∈ L∗ ,

(3.19)

k=1

or, that 2Re

3

λk ak (ψ) Φk (ζk ) =

k=1

dV (ζ) . ds

(3.20)

On the part of the boundary L\L∗ that is not covered with electrodes (on the boundary with the vacuum) the approximate condition Dn = 0 holds [115], which allowing for (3.13), one obtains 2Re

3

rk ak (ψ) Φk (ζk ) = 0.

(3.21)

k=1

Thus, we have two mechanical and one electric boundary condition to deﬁne the three functions Φk (zk ). Here we should note that all the relations that have been obtained in this section for the ﬁeld quantities are also valid in the case of a plane stress state (the thin-plate case). It is only necessary to drop the asterisks of the constants s∗ik , d∗ik , ∗33 .

3.2 A Bimorph with Cracks in One of the Pair Components

91

3.2 A Bimorph with Cracks in One of the Pair Components Consider a piecewise-homogeneous piezoceramic medium made up of two continuously connected, along x1 -axis, various piezoceramic halfplanes. To be more formalistic let us assume that the direction of the ﬁeld of the preliminarily polarization of the piezoceramic is parallel to x3 -axis. The upper halfplane contains crack Lj (j = 1, 2, . . . , k) that can be described as mathematical lines. In a homogeneous ﬁeld of mechanical stresses the quantities (1) (2) < σ11 >, < σ11 >, < σ13 > and < σ33 > are prescribed at inﬁnity while a stress vector (X1n , X3n ) could possibly act on the cut edges. It is assumed that the Lj ’s are smooth disconnected arcs, whose curves and functions X1n , X3n satisfy the H¨older condition (they are functions of class H [121]), contours Lj do not have common points and the given on them loading is continuous from one edge to the other. The mechanical and electric quantities in each halfplane are determined using three complex potentials Φν (zν ) given by formulas (3.10). In addition, all quantities on the “r”-th halfplane will have

the “r” index in (1) (2) (1) the upper part. The condition of ideal mechanical contact σ33 = σ33 , σ13 = (2) (1) (2) (1) (2) must be fulﬁlled on the line of conjugation of σ13 , u1 = u1 , u3 = u3 − → − → x3 = 0 where electric quantities E1 and D3 should also be continuous. The ideal mechanical contact conditions can be written as follows, similarly to (3.10) 3

(1) (2) (2) ckν Φ(1) Re ν (x1 ) − ckν Φν (x1 ) = 0

ν=1 (r) c1ν = γν(r) , (r) c4ν = qν(r) ,

(r)

c2ν = γν(r) μ(r) ν , (r)

c5ν = λ(r) ν ,

(k = 1, 2, . . . , 6) ,

(r)

c3ν = p(r) ν ,

(r)

c6ν = rν(r)

(3.22)

(r = 1, 2) .

The mechanical boundary conditions on the edges Lj are formulated in the usual way. Electric conditions are presented as conditions of conjunction of the electric ﬁeld on the interphase of two dielectrics [152]. In terms of the potentials we write 2Re

Re

3

± (1) bpν Φ(1) = fp± (ζ) ζ ν ν

ν=1 3

bnν Φ(1) ζν(1) = 0 ν

(p = 1, 2) ,

(n = 3, 4) ,

ν=1 (1) b1ν = γν(1) μ(1) ν aν (ψ) ,

b2ν = γν(1) a(1) ν (ψ) ,

(3.23)

92

3 Static Problems n

b1 +

a1 1

–

L1

ψ

bj

x3

Lj aj

O x1

2

Fig. 3.2a. The bimorph scheme with cracks in one of the components of a pair

(1) b3ν = λ(1) ν aν (ψ) ,

b4ν = rν(1) a(1) ν (ψ) ,

(1) a(1) ν (ψ) = μν cos ψ − sin ψ, f1 (ζ) = X1n (ζ) , f2 (ζ) = −X3n (ζ) ,

ζν(1) = Reζ + μ(1) ν Imζ,

ζ = ξ1 + iξ2 ∈ Lj

(j = 1, 2, . . . , k) .

Here ψ is the angle between the normal of the left edge Lj (during the movement from its beginning aj to the end bj ) and Ox1 - axis (Fig. 3.2a); the symbol [] signiﬁes a jump of the corresponding quantity passing through the cut.

(r) (r) by 1) conjugation Thus, the problem is in deﬁning of potentials Φν zν conditions on the interphase of media (3.22), 2) the boundary equalities (3.23) and also 3) the conditions at inﬁnity. In order to obtain the integral equations of the boundary problem of electroelasticity let us ﬁrst construct the fundamental solution for the compound piezoceramic plane in the no- crack case. Let us consider a concentrated force P1 + iP3 or a concentrated charge ρ (Fig. 3.2b) acting at a point (x10 , x30 ) on the upper halfplane of the compound medium.

P3 x3 1 2

P1 (x10, x30)

O x1

Fig. 3.2b. The bimorph scheme with concentrated force (charge) in the upper halfplane

3.2 A Bimorph with Cracks in One of the Pair Components

93

The solution of this problem is called fundamental. Applying the concept of the method of images [120] it takes the following form [178] Φ(1) ν Φ(2) ν

zν(1) =

(1)

Aν (1)

(1)

zν − zν0

−

3 (1) (1) βνm Am m=1

(1) (1) 3

βν+3,m Am (2) zν = , (2) (1) m=1 zν − zm0

zν(r) = Rez + μ(r) ν Imz, z = x1 + ix3 ,

(1)

(1)

zν − zm0

,

(3.24)

(r)

zν0 = Rez0 + μ(r) ν Imz0 ,

z0 = x10 + ix30

(x30 > 0; r = 1, 2; ν = 1, 2, 3) .

The ﬁrst term in the ﬁrst of the above equations corresponds to the fundamental solution for the homogeneous piezoceramic medium [59]. To calculate (1) constants Aν it is necessary to consider the three conditions of displacement singlevalueness, the condition referring to potential of the electric ﬁeld and three conditions of balance and charge conservation X1n ds = −P1 , X3n ds = −P3 , Dn ds = ρ, c

c

c

where c is an arbitrary closed contour containing the point (x10 , x30 ). Realiza(1) tion of these conditions brings to a system of six algebraic equations w.r.t Aν

m−1 Bm (1) (m = 0, 1, . . . , 5) , A(1) = μ ν ν h ν=1 (1) (1) P1 s33 d31 (1) (1) B0 = 33 −s13 , (1) (1) Δ1 2πs33 11

1 (1) (1) (1) (1) (1) P d + B1 = +d ρ , 3 15 33 31 11 33 (1) 2πΔ1 11 2Im

3

(1)

P1 d31 , 2πΔ1 1

(1) B3 = − ρ + P3 d33 , 2πΔ1 P1 (1) (1) B4 = d33 − d15 , 2πΔ1 Δ3 (1) Δ1 (1) B5 = − d33 − ρ , P3 s13 2πΔ1 Δ2 Δ3 2

(1) (1) (1) (1) (1) (1) (1) (1) Δ1 = d33 − d15 33 − 11 d31 , Δ2 = s11 33 − d31 ,

(1) (1) (1) (1) (1) Δ3 = d33 − d15 d31 − s11 11 , B2 = −

where h is the thickness of the plate.

(3.25)

94

3 Static Problems

The determinant of the system (3.25) reads Δ = −8i

Imμ1 Imμ2 Imμ3 2

|μ1 μ2 μ3 |

|(μ2 − μ1 ) (μ3 − μ1 ) (μ3 − μ2 ) × (μ2 − μ1 ) 2

(μ3 − μ1 ) (μ3 − μ2 )| = 0 Demanding the determined in (3.24) solution to satisfy the conditions of conjugation (3.22) on line x3 = 0 we come to the following system of linear (1) algebraic equations w.r.t βνm 3

(1) (1) (1) (1) cnν βνm + c(2) (3.26) nν βν+3,m = cnm ν=1

(n = 1, 2, . . . , 6;

m = 1, 2, 3) .

It may be shown that the determinants of these systems are diﬀerent from zero. Hence, the fundamental solution is determined by (3.24)–(3.26). If the concentrated force or the electric charge is applied at the point (x10 , x30 ) on the lower halfplane, the corresponding fundamental solution has the form (2) (2) 3

βν+3,m Am (1) z = , Φ(1) ν ν (1) (2) m=1 zν − zm1

zν(2) = Φ(2) ν

(2)

Aν (2)

(2)

zm1 = x10 + μ(2) m x30 (2)

(2)

zν − zν1

−

3 (2) (2) βνm Am m=1

(2)

(2)

zν − zm1

,

(x30 < 0, ν = 1, 2, 3) ,

(3.27)

(2)

where Aν , βνm are deﬁned, from (3.25) and (3.26) respectively, while i the upper indexes 1 and 2 can be exchanged. The complex potentials for the basic boundary problem are derived by sub(1) stituting the constants Am (m = 1, 2, 3) with distribution described in (3.24) 1 (1) Am = − ωm (ζ) a(1) ζ ∈ L = ∪Lj . (3.28) m (ψ) ds, 2πi L

Where ds is the element of the length of contour arc Lj We have [177]: 3 (1) (1) (1)

ων (ζ) dζν βνm ωm (ζ)dζm 1 (1) (1) z = B Φ(1) + + , ν ν ν (1) (1) (1) (1) 2πi 2πi ζν − zν ζ − z m=1 m ν L L (1) 3 (1)

βν+3,m ωm (ζ) dζm zν(2) = Bν(2) + , (3.29) Φ(2) ν (1) (2) 2πi ζm − zν m=1 L

ων (ζ) = {ωνj (ζ) , ζ ∈ Lj } ζν(r) = Reζ + μ(r) ν Imζ,

(j = 1, 2, . . . , k) ,

ζ ∈L

(r = 1, 2; ν = 1, 2, 3) .

3.2 A Bimorph with Cracks in One of the Pair Components

95

The integration here takes place on the corresponding aﬃne reﬂections (1) (r) of contour Lj on plane zν (ν = 1, 2, 3) and the constants Bν must simultaneously support the existence of the given ﬁeld of stresses and satisfy the conditions of media conjugation at inﬁnity. The integral representations in (3.29) satisfy the conditions of conjugation (3.22) irrespective of the choice of function ων (ζ). The latter must be determined from the boundary equalities (3.23). Substituting the limiting values of functions (3.29) and using the formulas Sohotsky-Plemmely [143] for the generalized integrals of Cauchy type, we come to a real system of two singular integral and four algebraic equations w.r.t three complex “densities” ων (ζ) ⎧ ⎫ 3 3 (1) (1) ⎬ ⎨ 1 ω (ζ) dζ (1) β ω (ζ)dζ ν νm m ν m 2Re b0pν + = Wp (ζ0 ) , (1) (1) (1) (1) ⎭ ⎩ πi πi ζν − ζ ζ −ζ ν=1

Re

3

ν0

L

bnν ων (ζ) = 0

m=1

L

m

ν0

(p = 1, 2; n = 1, 2, . . . , 4) ,

(3.30)

ν=1

(1) W1 (ζ0 ) = 2X1n − 2 < σ11 > cos ψ0 + < σ13 > sin ψ0 , W2 (ζ0 ) = −2X3n + 2 (< σ13 > cos ψ0 + < σ33 > sin ψ0 ) , bnν = bnν (ζ) ,

b0nν = bnν (ζ0 ) ,

(1)

ζν0 = Reζ0 + μ(1) ν Imζ0 ,

ψ0 = ψ (ζ0 ) , k

ζ0 ∈ L = ∪ Lj . j=1

The above system is augmented with the additional conditions Re

3

p(1) ν

ν=1

Re

3 ν=1

ων (ζ) dζν(1) = 0,

(3.31)

Lj

qν(1)

ων (ζ) dζν(1) = 0

(j = 1, 2, . . . , k) ,

Lj

which come out of the requirement of the displacement uniqueness in the compound medium. Equations (3.30), (3.31) uniquely deﬁne the functions ων (ζ) (ν = 1, 2, 3) in the

class of functions not limited on the ends Lj [121]. The potentials (r)

(r)

are reproduced from those equations according to formulas (3.29). Φν z ν In addition, the mechanical and electric ﬁeld quantities may be calculated, from (3.10) at any point of a compound medium. The derivation of formulas for the stress intensity factors results from an asymptotic analysis of the corresponding stresses in the vicinity of the crack tip. In that case it is necessary to proceed from the determining expressions [138] √ √ KI = im 2πr∗ σn , KII = im 2πr∗ τns (r∗ → 0) , (3.32)

96

3 Static Problems

where σn , τns are the normal and tangential stresses, respectively, on the continuation of the crack over the tip, and r∗ denotes the distance from the point to tip c. The parameterization of the contour Lj (the index j is omitted) reads ζ = ζ (β) ,

ζ0 = ζ (β0 )

(−1 ≤ β, β0 ≤ 1) .

Due to this situation Ωm (β) , ωm (ζ) = 1 − β2

(3.33)

where the functions Ωm (β) (m = 1, 2, 3) are continuous on section [−1, 1] according to H¨ older condition. Calculating the stress asymptotic on the tip using (3.10), (3.24), (3.29) and (3.33), from (3.32) we ﬁnd 3

2 (1) a(1) γm Ωm (±1), KI± = ± πs (±1)Im m (ψc ) m=1

± KII

3 (1) (1) = ± πs (±1)Im γm am (ψc ) e(1) m (ψc ) Ωm (±1),

(3.34)

m=1

(1) a(1) m (ψc ) = μm cos ψc − sin ψc , (1) e(1) m (ψc ) = μm sin ψc + cos ψc ,

where the upper index corresponds to the tip c = b, the lower one is −c = a; ψc is the angle between the normal to Lj on the tip c and Ox1 -axis. Using the parameterization of the contour Lj on the section −1 ≤ β ≤ 1 the system (3.30) can be written in a more convenient (w.r.t. the calculations) way: 3 1

ων∗ (β) Gνp (β, β0 ) + ων∗ (β)Gνp (β, β0 ) dβ = Wp∗ (β0 ) ,

(3.35)

ν=1−1 3

ων∗ (β) b∗nν (β) + ων∗ (β)b∗nν (β) = 0

(p = 1, 2; n = 1, 2, . . . , 4) .

ν=1

where (1)

aν (ψ) Gνp (β, β0 ) = πi Wp∗ (β0 ) = Wp (ζ0 ) , b∗0 pν

= bpν (ζ0 ) ,

b∗0 pν (1)

(1)

ζν − ζν0

−

(1) 3 b∗0 pm βmν

ων∗ (β) = ων (ζ) ,

ζ = ζ (β) .

(1)

(1)

m=1 ζν − ζm0

ψ = ψ (ζ) ,

s (β) ,

3.2 A Bimorph with Cracks in One of the Pair Components

97

According to the scheme given in [210] we can calculate the approximate values of the unknown functions Ων (β) in (3.33) in the zero of Chebyshev polynomial of the ﬁrst kind. The points of collocation are the roots of Chebyshev polynomial of the second kind (see: Appendix 12.8, par. B.1). Applying the quadrature formulas of (B.5), (B.8) type on both the integral equations in (3.35) and the additional conditions (3.31), we come to a 6N set of linear algebraic equations w.r.t the values at n the nodes of interpolation βν (ν = 1, 2, . . . , N ) of the functions, Ωi (β) and Ωi (β)(i = 1, 2, 3) given by 3 N

π Ωνi Gip (βν , ηm ) + Ωνi Gip (βν , ηm ) = Wp∗ (ηm ) N i=1 ν=1

(p = 1, 2; m = 1, 2, . . . , N − 1) , 3 N

b∗ni (βν ) Ωνi + b∗ni (βν )Ωνi = 0

(3.36) (n = 1, 2, . . . , 4) ,

i=1 ν=1

Re

3 N i=1 ν=1

Re

3 N i=1 ν=1

(1)

(1)

(1)

(1)

pi Ωνi aiν s (βν ) = 0, qi Ωνi aiν s (βν ) = 0,

where ds Ωνi = Ωi (βν ) , = (ζν ) , s (βν ) = , dβ β=βν 2ν − 1 πm π, ηm = cos . ζν = ζ (βν ) , βν = cos 2N N (1) aiν

(1) ai

The last two equations in (3.36), corresponding to the additional conditions (1) (1) (3.31) are derived with the help of equality dζν = aν (ψ) ds, To calculate the quantities Ωi (±1) (i = 1, 2, 3, ), appearing in expressions (3.34) for the stress intensity factors it is also necessary to use the formulas [126] N 1 2ν − 1 ν+N π, (−1) Ωνi tg LN [Ωi , −1] = N ν=1 4N

LN [Ωi , 1] = −

N 1 2ν − 1 π. (−1)ν Ωνi ctg N ν=1 4N

(3.37)

98

3 Static Problems 1.2

< K±I >

1 5

0.6 3 0.0 2 –0.6

4 ϕ

–1.2 –0.50π

–0.25π

0.00 0.25π 0.50π √ −1 Fig. 3.3. Changes of quantity < KI >= (Λ πl) KI according to the orientation angle ϕ of the crack

By increasing the parameter N , the solution of the system of algebraic (3.36), which is a discrete analogue of (3.30), (3.31), converges uniformly to their exact solution. As an example let us consider the bimorph (material of the upper halfplane is ceramics BaTiO3 , of the lower one is PZT-5), having a parabolic crack

1.2

< K±I >

2

0.6

1 0.0 5

3 –0.6 4

ϕ –1.2 –0.50π

–0.25π

Fig. 3.4. Changes of quantity < KII angle ϕ of the crack

0.00 0.25π 0.50π √ −1 >= (Λ πl) KII according to the orientation

3.2 A Bimorph with Cracks in One of the Pair Components 1.4

±

99

5

1 2

0.7

4 3

0.0

4 –0.7

2 p__ * p

–1.4 –0.50

–0.25

0.00

0.25

0.50

Fig. 3.5. Changes of quantity < KI > as a function of parameter p∗ /p

above the interphase and the corresponding parametric equation having the form of ξ1 + iξ2 = pβ + ip∗ β 2 eiϕ + ih (−1 ≤ β ≤ 1) . The number of Chebyshev nodes was taken to be equal to N = 11, 15, 19; further increase of N did not reﬁne the solution. Below are presented the results obtained for the relative stress intensity

√ −1 KI,II (2 is the crack length) w.r.t the angle of factors < KI,II >= Λ π ± 1.1 < K II > 2 0.5

1

5

3 –0.1

3 1

–0.7

5

4 p__ * p

–1.3 –0.50

–0.25

0.00

0.25

0.50

Fig. 3.6. Changes of quantity < KII > as a function of curvature parameter p∗ /p

100

3 Static Problems

the crack orientation ϕ and curve parameter p∗ for diﬀerent types of stresses. The curves 1, 2 are constructed for uniform normal and tangential loading of intensity P on crack edges (Λ = P ); curves 3, 4 and 5 are constructed (1) for uniform tension along x1 Λ =< σ11 > , pure shear (Λ =< σ13 >) and tension along axis x3 (Λ =< σ33 >) at inﬁnity. The solid- lines correspond to tip c = a, dashed- lines to c = b. Figs. 3.3 and 3.4 illustrate the quantities < KI > and < KII > for a linear crack (p∗ /p = 0, h/p = 1.05) in Figs. 3.5 and 3.6 for parabolic crack (ϕ = 0, h/p = 0.6).

3.3 Bimorph with Openings in One of the Pair Components Consider the analogous problem of bimorph weakened in the upper halfplane of opening Γj (j = 1, 2, . . . , n). Let us assume that when on the edges of the openings bounded with vacuum, the stress vector (X1n , X3n ) acts the homo(1) (2) geneous stress ﬁelds < σ11 >, < σ11 >, < σ13 >, < σ33 > and the electric (1) (2) ﬁeld with strengths < E1 >, < E3 >, < E3 > are applied at inﬁnity. The prescribed at inﬁnity ﬁelds are not quite arbitrary; conditions of joint deformation of the upper and lower half-planes cause connections which are described below. Let us suppose that the curves of contour Γj and function X1n , X3n belong to the class of functions, continuous by H¨ older, and besides ∩Γj = ∅. The above is reduced to the determination of six complex func problem (r) z (ν = 1, 2, 3; r = 1, 2) from conditions (3.22) on the intertions Φ (r) ν ν phase of media, conditions at inﬁnity and also on boundary conditions on the contours of openings Γj . The latter may be presented as follows 2Re

3

− ζν(1) bpν Φ(1) = fp (ζ) ν

(p = 1, 2, 3) ,

(3.38)

ν=1 (1) b1ν = γν(1) μ(1) ν aν (ψ) ,

b2ν = γν(1) a(1) ν (ψ) ,

b3ν = rν(1) a(1) ν (ψ) ,

(1) a(1) ν (ψ) = μν cos ψ − sin ψ,

f1 (ζ) = X1n (ζ) ,

f2 (ζ) = −X3n (ζ) ,

ζν(1) = Reζ + μ(1) ν Imζ,

f3 (ζ) = 0,

ζ = ξ1 + iξ2 ∈ Γj

(j = 1, 2, . . . , n) .

Here ψ is the angle

between the normal to contour Γj and Ox1 - axis (Fig. 3.7). (1 )

(1 )

ζν we consider thei limiting values at z → ζ ∈ Γj As functions Φν when this transition has direction from the body to the hole. The condition corresponding to p = 3 expresses the equality to zero of the normal component of the vector of electric induction on Γj .

3.3 Bimorph with Openings in One of the Pair Components n

Γ1

Γj

x3 1

101

ψ

O x1

2

Fig. 3.7. A bimorph with an opening in one of the components of a pair

By applying the fundamental solution (3.24) we may present the analytical (r )

functions Φν

(r )

zν

in the following form [188]

Φ(1) zν(1) = Bν(1) + ν

3

qk (ζ)

k=1 Γ

⎧ ⎨

(1)

ωkν

⎩ zν(1) − ζν(1)

3

⎫ 3 (1) (1) βνm ωkm ⎬ ds, (3.39) − (1) (1) z −ζ ⎭ m=1

ν

(1) (1) βν+3,m ωkm (2) (2) + q (ζ) ds (ν z = B Φ(2) k ν ν ν (2) (1) m=1 zν − ζm k=1 Γ n qν (ζ) = {qνj (ζ) , ζ ∈ Γj } , Imqν (ζ) = 0, Γ = ∪ Γj . j=1 3

m

= 1, 2, 3) ,

(r)

Here ds is the element of the arc length of contour Γ, the constants Bν reﬂect the, given at inﬁnity, homogeneous ﬁelds of mechanical stresses and strengths (1) of the electric ﬁeld. The complex constants ωkm represent “standard” solutions of the system (3.25) which are connected by (1)

(1)

(1)

A(1) m = P1 ω1m + ρω2m + P3 ω3m

(m = 1, 2, 3) .

The integral representations (3.39) satisfy the conditions of conjugation (3.22) no matter what the choice of “densities” qk (ζ) is. (1) (1) Substituting the limiting values of representations (3.39) at zν → ζν0 into the boundary conditions (3.38) we get a system of three real singular integral equations of the second kind: ⎧ ⎫ 3 ⎨ ⎬ p = 1, 3 , tpk (ζ0 ) qk (ζ0 ) + qk (ζ) Gkp (ζ, ζ0 ) ds = Np (ζ0 ) ⎩ ⎭ k=1 Γ ⎧ ⎫ 3 3 (1) (1) (1) ⎨ ⎬ ω β ω νm km Gkp (ζ, ζ0 ) = 2Re b0pν − (1) kν (1) , (3.40) (1) (1) ⎩ ζν − ζ ⎭ ζ −ζ ν=1

tpk (ζ0 ) =

m=1

(1) b0pν ωkν −2πIm , (1) ν=1 aν (ψ0 ) 3

m

ν0

ν0

102

3 Static Problems

Np (ζ0 ) = fp (ζ0 ) + fp∗ (ζ0 ) ,

b0pν = bpν (ψ0 ) ,

ψ0 = ψ (ζ0 ) ,

(1)

f1∗ (ζ0 ) = − < σ11 > cos ψ0 − < σ13 > sin ψ0 ,

f2∗ (ζ0 ) =< σ13 > cos ψ0 + < σ33 > sin ψ0 ,

(1) (1) f3∗ (ζ0 ) = − d15 < σ13 > + 11 < E1 > cos ψ0 −

(1) (1) (1) (1) − d31 < σ11 > +d33 < σ33 > + 33 < E3 > sin ψ0 , (1)

ζν0 = Reζ0 + μ(1) ν Imζ0 ;

ζ, ζ0 ∈ Γ.

The functions bpν (ζ) , fp (ζ) are deﬁned in (3.38). To determine the stress concentration in a bimorph with openings, we ﬁrst calculate the normal stress σϑ on contour Γ. Allowing for representation (3.10) we have σϑ (ζ0 ) = σ11 sin2 ψ0 + σ33 cos2 ψ0 − σ13 sin 2ψ0 = 3

2

(1) ζν0 . γν(1) μ(1) Φ(1) = 2Re ν sin ψ0 + cos ψ0 ν

(3.41)

ν=1

(1) (1) Here by functions Φν ζν0 we consider their limiting values at z → ζ0 ∈ Γ when this transition has direction from the body to the hole, ϑ is the angle between the positive tangential to the contour of the opening at point ζ0 and axis Ox1 . As an example, two variants of the compound plate were studied: in the ﬁrst one the material of the upper halfplane is BaTiO3 , while that of the lower is PZT-5 (variant A); in the second one the material of the upper halfplane is PZT-5, while that of the lower one is BaTiO3 (variant B). In these cases, compound plates with elliptic and “square” holes described by the following parametric equations (at a constant value, C = 0.14036), Reζ = R1 cos ϕ, Imζ = h + R2 sin ϕ, Reζ = R0 (cos ϕ + C cos 3ϕ) ,

ϕ ∈ [0, 2π] ; (3.42)

Imζ = R0 (sin ϕ − C sin 3ϕ) + h. Using (3.42) the integral (3.40) can be reduced to a system of linear algebraic equations w.r.t. the relative values of qk (ζ) calculated at the nodes of interpolation using the quadrature method [48, 84, and 137] (see: Appendix B 12.8, par. B.2). Figure 3.8 demonstrates the behavior of relative normal stress λ = σϑ /Λ (Λ is the loading intensity) on the contour of an elliptic opening when the (1) stresses < σ11 >, < σ13 > or < σ33 > (curves 1,2 and 3, respectively) are acting at inﬁnity for variant A. The values of the parameters were h/R1 = 4/5, R1 /R2 = 5/3. Dashed lines correspond to the changes of λ on the contour of the given opening in the homogeneous piezoceramic plate

3.3 Bimorph with Openings in One of the Pair Components

103

λ

4.8

3

3

2.4

1

0.0 1 –2.4

2 2 ϕ

–4.8 0.0

π

0.5π

1.5π

2π

Fig. 3.8. The behaviour of relative stress λ = σθ /Λ on the contour of an elliptic (1) opening under the inﬂuence of stresses < σ11 > and < σ13 >, < σ33 >

(material BaTiO3 ). We should note that the stress σϑ was calculated by using (3.39) and (3.41). The investigation of the stress concentration on a plate with an opening in the presence of an external electric ﬁeld is of great interest. In Figs. 3.9 and 3.10 we present the stress σϑ on the contour of a square opening under (1) the action of ﬁelds < E1 > (curves 1) and < E31 > (curves 2) by intensity 1V /m for variants A and B, respectively. For our illustrations we used h/R0 = 1.2, R0 = 1m. σθ

17.0

(1)

E3 BaTiO3

11.3

E1

PZT-5 2

5.6

–0.1 1 ϕ –5.8 0.0

0.5π

π

1.5π

2π

Fig. 3.9. Stressses σθ on the contour of a square opening under the inﬂuence of an (1) (1) electric ﬁeld. < E1 >, and < E3 > with intensity 1V/m (variant A)

104

3 Static Problems σθ

4.4

1

1.3

–1.8

–4.9

2 ϕ

–8.0 0.0

π

0.5π

1.5π

2π

Fig. 3.10. The behaviour of relative stresses σθ on the contour of a square opening (1) (1) under the inﬂuence of electric ﬁeld < E1 > and < E3 > with intensity 1V/m (variant B)

Figure 3.11 shows results in the case of a plate with a square opening the change of quantity λ for variants A. Curves 1, 2 and 3 correspond to the action (1) of stresses < σ11 >, < σ13 > and < σ33 > (h/R0 = 1.2). The dashed lines have the same meaning as in Fig. 3.8.

λ

8.2

5.0 1

3 2

1.8

–1.4 ϕ –4.6 0.0

0.5π

π

1.5π

2π

Fig. 3.11. Changes of quantity λ on the contour of an opening under the inﬂuence (1) of stress < σ11 > and < σ13 >, < σ33 >

3.3 Bimorph with Openings in One of the Pair Components

105

Table 3.1. The approximate values of the stress concentration factors for various types of loading for the case of a plate with an elliptic opening (1)

< σ11 >

< σ13 >

< σ33 >

R1 /R2 = 1 R1 /R2 = 2

3.29 2.07

4.39 4.69

R1 /R2 = 1 R1 /R2 = 2

3.01 2.01

3.87 4.35

N

(1)

>

(1)

T

< E1

< E3 >

Variant A 3.09 1.18 5.08 3.04

0.09 1.55

0.032 0.018

0.073 0.071

Variant B 2.69 1.04 4.44 2.64

0.11 1.48

0.073 0.033

0.114 0.109

In Table 3.1 we present, for various types of loadings, the approximate values of the stress concentration factors for the problem of a compound plate with elliptic (h/R1 = 1.5) opening,. In the case where an electric ﬁeld (1) < Ej > (j = 1, 3) acts at inﬁnity the concentration factor is given by

(1) (1) (1) kj = d15 |σϑ |/ 11 < Ej > . Similar results for a homogeneous piezoceramic plate are presented in Table 3.2 The results presented in Figs. 3.9, 3.10 testify a strong inﬂuence of the pair material on the stress concentration under the action of external electric ﬁeld. It should be noted that the prescribed at inﬁnity mechanical and electric quantities are not quite arbitrary. The stresses σ13 and σ33 and also the components of electric strength E1 continue across the interphase of the media but σ11 and E3 undergo jumps which may be determined from conditions of the joint deformation (2)

(2)

(2)

(2)

(2)

(2)

(1)

(1)

(2)

(1)

(1)

s11 < σ11 > +d31 < E3 >= s11 < σ11 > +

(1) (2) (1) (1) + s13 − s13 < σ33 > +d31 < E3 >, (2)

(3.43)

d31 < σ11 > + 33 < E3 >= d31 < σ11 > +

(1) (2) (1) (1) + d33 − d33 < σ33 > + 33 < E3 > . Table 3.2. The approximate values of stress concentration factors for a homogeneous piezoceramic plate (1)

< σ11 >

< σ13 >

< σ33 >

R1 /R2 = 1 R1 /R2 = 2

3.0 2.0

4.05 4.52

R1 /R2 = 1 R1 /R2 = 2

3.08 2.04

4.06 4.48

N

(1)

>

(1)

T

< E1

< E3

BaTiO3 2.91 1.05 4.83 2.87

0.05 1.52

0.0019 0.0018

0.0023 0.0043

PZT-5 2.83 1.06 4.67 2.76

0.06 1.5

0.022 0.019

0.022 0.038

>

106

3 Static Problems

(2) (2) by the given quantities Equalities (3.43) permit us to deﬁne σ11 , E3 (1) (1) σ11 , σ33 , E3 .

3.4 A Composite Plate with a Crack Crossing the Interphase Let us investigate the behavior of the stress intensity factor at tension of an inﬁnite composite piezoceramic plate with a crack crossing the line of media conjugation. Let a curvilinear crack L cross the material interphase at node C, and at this point the crack is not smooth (Fig. 3.12). Let us suppose that at inﬁnity, (1) a homogeneous ﬁeld of mechanical stresses σ11 , σ13 , σ33 is prescribed, and a force vector (X1n , X3n ) acts on the crack edges. We assume that the direction of the electric ﬁeld of the preliminary polarization of the piezoceramics is parallel to x3 -axis. Let Lr (r = 1, 2) be a part of the crack contour L lying on the r-th halfplane. Then, using (3.10) the mechanical and electric boundary conditions on the crack can be written as 3

±

(r) (r) (r) 2Re bpk Φk ζk = fp(r) ζ (r) , ζ (r) ∈ Lr , (3.44) k=1

Re

3 k=1

(r) (r) (r) bnk Φk ζk =0

(p = 1, 2; n = 3, 4) ,

where (r)

(r) (r) (r)

(r)

(r) (r)

(r)

(r)

(r)

b1k = γk μk ak (ψ) , (r)

b3k = λk ak (ψ) ,

(r) (r)

b4k = rk ak (ψ) ,

ak (ψ) = μk cos ψ − sin ψ (r) f1

=

(r) X1n ,

(r) f2

=

2

(r = 1, 2) ,

(r) −X3n .

x3 1

(r) (r)

b2k = γk ak (ψ) ,

b α1 α2

c

O x1

a

Fig. 3.12. The scheme of a composite plate with a crack

3.4 A Composite Plate with a Crack Crossing the Interphase

107

Here the symbol [·] denotes a jump of the corresponding quantity on L, Ψ is an angle between the normal to the left edge L (when it moves from its beginning to the end b) and Ox2 - axis. Here we should note that the last two conditions in (3.44) express the continuation of the normal component of the induction vector and the tangential component of the strength vector of the electric ﬁeld crossing Lr .

(r) (r) ν = 1, 3; Hence, the problem consists of deﬁning six potentials Φν zν r = 1, 2) by boundary conditions (3.44), conjugated conditions (3.22) and also conditions at inﬁnity. By applying the fundamental solution (3.24), (3.27) let us present the complex potentials as follows [16] Φ(r) ν

zν(r)

1 = 2πi

+

(r) (r)

ων

ζ

(r)

dζν

(r)

(r)

ζν − zν

Lr

3

1 (3−r) β 2πi m=1 ν+3,m

L3−r

r = 1, 2; ν = 1, 3

(r) (r) ξ1 , ξ3 ∈ Lr .

zν(r)

(r) (r) (r) 3 ωm ζ dζm 1 (r) ++ βνm + (r) (r) 2πi m=1 ζ − z m ν Lr (3−r) (3−r) (3−r) ζ dζm ωm (3−r) (r) ζm − zν

= x1 + μ(r) ν x3 ,

(r)

(3.45) + Bν(r) (r)

ζν(r) = ξ1 + μ(r) v ξ3

Here x3 > 0 at r = 1 and x3 < 0 at r = 2, and in this case the integration is (r) carried out by the following aﬃne reﬂection of contour Lr on zν -planes. The (r) constants Bν depend on the disturbance of the electric ﬁelds due to given at inﬁnity stresses. At this point we should also note that integral representations (3.45) satisfy the conjugated conditions (3.22) irrespective of the choice of thefunctions (r) (r) (r) ων ζ (r) . Substituting the limiting values of potentials Φν zν into the (r)

(r)

boundary condition (3.44) at zν → ζνo , we get a real system of four singular integral and eight algebraic equations w.r.t six complex “densities” equations ω (r) ζ (r) : Re

3 ν=1

+

(r) bpν0

!

1 πi

(r) (r)

ων

Lr

3 1 (3−r) βν+3,m πi m=1

L3−r

(r) (r) (r) 3 dζm ωm ζ 1 (r) + βνm + (r) (r) (r) (r) πi m=1 ζν − ζν0 ζ − ζ m ν0 L ⎫ r (3−r) (3−r) ⎪ ⎬

ζ (3−r) dζm ωm (r) (r) = F ζ (p = 1, 2) , p 0 (3−r) (r) ⎪ ζm − ζν0 ⎭ ζ

(r)

dζν

(3.46)

108

3 Static Problems

Re

3

(r) ζ (r) = 0 b(r) nν ων

ν=1 (r)

F1

(r)

F2

(r)

ψ0

(r)

ζ0

(r)

ζ0

(r = 1, 2; n = 1, 2, . . . , 4) ,

(r) (r) (r) (r) = X1n − σ11 cos ψ0 − σ13 sin ψ0 , (r)

(r)

(r)

= −X3n + σ13 cos ψ0 + σ33 sin ψ0 ,

(r) (r) (r) bnν0 = b(r) ζ , = ψ (r) ζ0 , nν 0 (r)

(r)

(r)

ζ (r) = ξ1 + iξ3 ,

ζ0

∈ Lr .

The system (3.46) is augmented by the additional conditions Re

2 3

p(r) ν

r=1 ν=1

Re

2 3 r=1 ν=1

ων(r) ζ (r) dζν(r) = 0,

(3.47)

Lr

qν(r)

ων(r) ζ (r) dζν(r) = 0,

Lr

which come out of the requirement that the shift jumps at node c must be equal. As it is presented in Sect. 3.3, the prescribed at inﬁnity stresses are not quite arbitrary; the conditions of singlevalueness of deformations on the upper and lower halfplanes cause the connection expressed by (3.43). the equalities (1) (2) = 0 , the strength σ11 In the absence of electric ﬁeld at inﬁnity E3 may be determined by

(2)

σ11

(1) (2) (2) (1) d d31 − 33 s11 (1) = 31 σ11 2 (2) (2) (2) d31 − 33 s11

(2) (1) (2) (2) (1) (2) d31 d33 − d33 − 33 s13 − s13 +

σ33 .

2 (2) (2) (2) d31 − 33 s11

(3.48)

Now, equality (3.48) can be used for the calculation of the function

(2) ζ0 appearing in (3.46).

(2)

F1

The kernels of the integral (3.46) besides the movable singularity of Cauchy type, thy also possess the immovable singularity at node c. Therefore, the approximate solution to the system (3.46) together with equality (3.47) should be sought as a function class not limited from the both ends of contour Lr . After approximating the solution of system (3.46), (3.47) by using

the (r) (r) (r) (r) functions ων ζ according to formulas (3.45), the potentials Φν zν are transformed, then considering complex representations (3.10) the coupled

3.4 A Composite Plate with a Crack Crossing the Interphase

109

mechanical and electric quantities at any point of the compound media are deﬁned. Let us parametrize the contour Lr (r = 1, 2) by making use of the formulas ζ (r) = ζ (r) (δ) , δ ∈ [−1, 1]. In the general case it is possible to write

ων(1) ζ (1) =

ων(2) ζ (2) =

(1)

Ων (δ) , γ√ (1 + δ) 1−δ

(3.49)

(2)

Ων (δ) , γ√ (1 − δ) 1+δ

(r)

where Ων (±1) = 0. The order of power singularity γ in (3.46) may be determined from asymptotic analysis of singular integral equations in the vicinity of point c on arcs Lr . This rather complex investigation is not carried out here. Assuming that the inequality Re γ < 1/2 holds, the numerical realization of the constructed algorithm is accomplished writing (r)

Ων (δ) ων(r) ζ (r) = √ 1 − δ2

considering that

Ω(1) ν (−1) = 0,

ν = 1, 3; r = 1, 2 , Ω(2) ν (1) = 0.

(3.50)

(3.51)

Now we are ready to apply the quadrature formulas of Gauss-Chebyshev [210, 211] to the system of (3.46), (3.47) and by using (3.50) we come to a system of 12N − 2 algebraic equations w.r.t 12N unknown values of the functions (r)

(r)

Ων (δ) and Ων (δ) calculated at the nodes of the division of contour Lr (N is the number of the interpolation nodes). To complete the resulting system we need to add two algebraic equations which correspond to two equalities from (3.51). The calculations show that the arbitrary choice of these equalities does not practically inﬂuence the precision of the obtained results. The details of the numerical scheme in the case of broken and star cracks in isotropic medium can be found in [160]. By applying asymptotic analysis for the stresses on the tips of cracks a and using (3.10), (3.45) and (3.50) we ﬁnd the following expressions for the stress intensity factor f KI± = ± ± KII

3

2 (r) a(r) πs (±1)Im γm (ψ ) Ω(r) d m m (±1), m=1

3 (r) (r) (r) = ± πs (±1)Im γm am (ψd )e(r) m (ψd )Ωm (±1),

s (±1) =

ds , dδ δ=±1

m=1 (r) a(r) m (ψd ) = μm cos ψd − sin ψd ,

(r) e(r) m (ψd ) = μm sin ψd + cos ψd .

(3.52)

110

3 Static Problems

Here the upper sign corresponds to the crack tip d = p (r = 1), the lower one to d = a, (r = 2), ψd is angle between the normal to L on tip d and axis Ox1 . As an example let us consider a piezoceramic bimorph (the material of the upper halfplane is BaT iO3 , of the lower one is PZT-5), weakened by a broken crack with parametric equations (r)

r

(1 − (−1) δ) cos αr 2 r (δ − (−1) δ) sin αr = 2

ξ1 = (r)

ξ3

(−1 ≤ δ ≤ 1) , (r = 1, 2) .

√ # $ In Figs. 3.13 and 3.14 we show the change of quantity KI± = KI±/ Λ π , (1) as a function of crack orientation angle L1 under the action of stress σ11 and σ13 respectively at inﬁnity (edges L are free of forces). Here 2 is the length of arc L1 , Λ is the intensity of the given stresses. The Curves 1 and 2 in Figs. 3.13, 3.14 are constructed for a2 = π/10 and π/2. The solid lines

√cor # ±$ ± respond to tip b, the dashed ones to a. The graphs of KII = KII / Λ π at the same values of the parameters and in the same conditions are given in Figs. 3.15, 3.16. To estimate the inﬂuence of the presence of interphase on the intensity ± factors KI± and KII , the system (3.46), (3.47) was numerically solved in the case of a homogeneous BaT iO3 plate, weakened by broken crack. The results 1.5

< K±> I 2

1.1

1 2

0.7 1

c

2

0.3

b α1 α2

a 1

–0.1 0.1π

α1 0.3π

Fig. 3.13. Changes of quantity < (1) of stress < σ11 > at inﬁnity

KI±

0.5π

0.7π

0.9π

> as a function angle α1 , under the inﬂuence

3.4 A Composite Plate with a Crack Crossing the Interphase

111

I

1.6

1

0.8

0.0

4

3

4 2

1

2

3

–0.8

–1.6 0.1π

α1 0.3π

0.5π

0.7π

0.9π

Fig. 3.14. Changes of quantity < KI± > as a function of angle α1 , under the inﬂuence of stress < σ13 > at inﬁnity

are illustrated in Figs. 3.14, 3.15; curves 3 and 4, refer to a2 = π/10 and π/2, respectively. The graphs of < KI± > at κ = /∗ = 0.1m (m is the number of the curve, ∗ 2 is the length of L2 ) and < σ13 >= 0 is shown in Fig. 3.17. From these results we conclude that under the action of tangential stresses

σ13 at inﬁnity, the presence of the interphase may substantially change the stress intensity factors. 1.6

II 2

0.8

1

2

1 2

0.0

b α1 α2

c a

–0.8

–1.6 0.1π

3

1 4 α1

0.3π

0.5π

0.7π

0.9π

± Fig. 3.15. Changes of quantity < KII > as a function of angle α1 , under the inﬂuence of stress < σ13 > at inﬁnity

112

3 Static Problems 0.90

< K±> II 2

1 2

0.45

b α1 α2

c a

1 2 0.00

1

–0.45

α1

–0.90 0.1π

0.3π

0.5π

0.7π

0.9π

± Fig. 3.16. Changes of quantity < KII > as a function of angle α1 , under the (1) inﬂuence of stress < σ11 > at inﬁnity

4.4

I

1

3.3 2 3

2.2 4

1.1

0.0 0.1π

α1

4

0.2π

0.3π

0.4π

0.5π

Fig. 3.17. The graphs of quantity < KI± > for various values of k = l/l∗ under the inﬂuence of stress < σ13 > at inﬁnity

3.5 A Composite Plate with an Opening Crossing the Interphase Here we investigate the stress concentration in a compound piezoceramic plate weakened by a hole Γ and crossing the boundary interphase of materials at points c1 and c2 . At these points the contour may not be smooth (Fig. 3.18). (1)

A homogeneous ﬁeld of mechanical stresses σ11 , σ13 , σ33 and electrical (1) (2) ﬁeld E1 , E3 , E3 is applied at inﬁnity, the hole is free from mechanical forces, and bounded by vacuum (axis x3 coincides with the direction of preliminarily polarized piezoceramics).

3.5 A Composite Plate with an Opening Crossing the Interphase

113

β1 1

c1

c2

2

–β2

Fig. 3.18. The scheme of a composite plate with an opening crossing the interphase

Denoting by Γr (r = 1, 2) the part of contour Γ lying on the r-th halfplate let us write down the mechanical and electric boundary conditions on the edges of the opening as follows 2Re

3 k=1

− (r) (r) (r) bnk Φk ζk =0

(r) (r) (r) (r) b1k = γk μk ak ψ (r) ,

(r) (r) (r) b3k = rk ak ψ (r) , (r)

(r = 1, 2; n = 1, 2, 3) , (r)

(r) (r)

b2k = γk ak

(3.53)

ψ (r) ,

(r)

ak (ψ) = μk cos ψ (r) − sin ψ (r) ,

(r) (r) (r) (r) (r) ∈ Γr . ξ1 , ξ3 ζk = ξ1 + μ(r) ν ξ3 , Here ψ (r) is the angle the normal to contour Γr and Ox1 - axis,

between (r) (r) (r) (r) we consider their limiting values at zν → ζν0 while by functions Φk ζk moving from the body to the hole. The condition in (3.53) corresponding to n = 3 regulates the equality to zero the normal components of the electric induction vector on the boundary (air).

(r) (r) in Using (3.24), (3.27) let us represent the analytical functions Φν zν the following way [17]

Φ(r) zν(r) = ν

3 k=1Γ r

+

(r) qk

3

k=1Γ 3−r (r)

Imqk = 0,

⎫ ⎧ 3 (r) (r) ⎬

⎨ ω (r) ω β νm kν km ds+ ζ (r) + (r) (r) ⎭ ⎩ zν(r) − ζν(r) ζ m=1 ν − zν

(3−r)

qk

(3−r) (3−r) 3

ωkm βν+3,m ζ (3−r) ds + Bν(r) , (r) (3−r) m=1 zν − ζm

zν(r) = x1 + μ(r) ν x3

(3.54)

(r = 1, 2; ν = 1, 2, 3) .

where x3 = 0 at r = 1 and x3 = 0 at r = 2, ds is the element of the arc length (r) of contour Γ; the constants Bν reﬂect the conditions at inﬁnity. The Integral

114

3 Static Problems

representations (3.54) satisfy the conjugation conditions (3.22) irrespective of (r) the choice of the function qk (ζ).

(r)

(r)

(r)

(r)

at zν → ζν0 Substituting the limiting values of the potentials Φν zν into the boundary conditions (3.53) we get a system of six singular integral equations of the second kind: ⎧ 3 3 3 ⎨

(r) (r) (r) (r) (r) + 2Re tnk qk ζ0 bnν0 qk ζ (r) ⎩ ν=1 k=1 k=1Γ r ⎡ ⎤ 3 (r) (r) (r) ω βνm km ⎣ ωkν ⎦ ds+ + (r) (r) (r) (r) ζν0 − ζν m=1 ζm − ζν0 ⎫ ⎪ (3−r) (3−r) 3 3

ωkm βν+3,m ⎬ (3−r) (r) (3−r) (r) = F ζ ζ + qk ds n 0 (r) (3−r) ⎪ ⎭ m=1 ζν0 − ζm k=1Γ 3−r r = 1, 2; n = 1, 3 , 3 (r) (r) bnν0 ωkν

, (r) (r) ψ0 ν=1 aν

(r) (r) (r) (r) (r) ζ0 = − σ11 cos ψ0 − σ13 sin ψ0 , (3.55) F1

(r) (r) (r) (r) ζ0 = σ13 cos ψ0 + σ33 sin ψ0 , F2

(r) (r) (r) (r) (r) F3 ζ0 = − d15 σ13 + 11 E1 cos ψ0 −

(r) (r) (r) (r) (r) (r) − d31 σ11 + d33 σ33 + 33 E3 sin ψ0 ,

(r) (r) (r) (r) bnν0 = b(r) , ψ0 = ψ (r) ζ0 , nν ζ0 (r)

tnk = −2πIm

(r)

(r)

ζ (r) = ξ1 + iξ3 ;

(r)

ζ (r) , ζ0

∈ Γr .

At nodes c1 and c2 , the kernels of the above system have immobile singularities. Therefore, its solution should be sought in the class of functions undergoing breaks on the ends of arc Γr : the order of power singularities of the solution of system (3.55) is determined from asymptotic analysis of the singular integral equations in the vicinity of nodes on arcs Γr . From this analysis we get linear connections between left-side and right-side limits of the solution at nodes which should be considered as additional conditions for the single-value solution of system (3.55). Let us now consider the approximate scheme for the numerical realization of integral (3.55) which allows us to avoid the exact determination of the order of singularities of their solution at the nodal points. Let us assume that the contour Γ crosses x1 - axis at nodes c1 and c2 at an angle (β1 = −β2 = π/2)

3.5 A Composite Plate with an Opening Crossing the Interphase

115

and that its curvature is a continuous function of s arc-curvature. In this case (r) we may assume that the order of power singularity γ of functions qk ζ (r) in (3.55) does not considerably diﬀer from zero (Re γ << 1/2). To numerically solve the system of integral equations we use the quadrature formulas for the calculations of singular and regular integrals given on the closed contours [137]. Here, it should be mentioned that the method of quadratures is based on the approximation of the functions by continuous aggregates (Lagrange polynomial); hence the given approach is proved to be correct for the calculation of “densities” qk (ζ) only at the points of contour Γ, which are in the vicinity of the nodes c1 and c2 . To investigate the concentration of stresses in a piecewise-uniform plate under the inﬂuence of the prescribed and electric ﬁelds we determine the normal stress σθ on contour Γ. Using the complex representations (3.10) we ﬁnd 3

2

(r) (r) (r) (r) (r) = 2Re ζ γν(r) μ(r) sin ψ + cos ψ Φ σϑ ζ0 ν ν 0 0 ν0 . ν=1

(r)

In (3.56), the function Φν (r) zν

(r)

ζν0

(3.56)

(r = 1, 2) is evaluated at its limiting

(r) ζν0 .

values → As an example let us consider a composite plate (the material of the upper halfplane is BaT iO3 , and of the lower one is PZT-5) weakened by a circular opening with a center lying on x1 -axis. In Fig. 3.19 the graphs display the change in the parameter λ = σθ /Λ (Λ is the intensity of loading) on the (1) opening contour under the action of stresses σ11 , σ13 or σ33 at inﬁnity (curves 1, 2 and 3, respectively). Fig. 3.20 depicts the behavior of stresses (1) with σθ resulting from the applied, at inﬁnity, electric ﬁeld E1 or E3 intensity 1V /m, (curvatures 1 and 2, respectively). Fig. 3.21 illustrates the changes in Es on the opening contour under the action of mechanical stresses (1) σ11 , σ13 or σ33 with intensity 1N/m2 (the curvatures are built in the same way as in Fig. 3.19). In Figs. 3.19–3.21 dashed-lines depict the inﬂuence of the boundary interphase on the stress concentration on a homogeneous plate from BaT iO3 with a circular opening. From the results, it follows that in the vicinity of the opening, a composite plate subjected to a homogeneous ﬁeld of stresses, undergoes a considerable increase of stress concentration. This result is in analogy with the case of deformation of a homogeneous plate with an opening (see Fig. 3.19). Due to the reverse piezoelectric eﬀect, under the inﬂuence of an external electric ﬁeld, the presence of the boundary conjugation of halfplates brings to a considerable increase in stress concentration (Fig. 3.20). The proposed simpliﬁed scheme for the numerical solution of the integral (3.55) is eﬃcient when the knowledge of the distribution of electric ﬁelds in

116

3 Static Problems λ

4.8

2

2 1 1

3 3 0.0

1

3 2

–4.8 π/2

ϕ

3π/2

Fig. 3.19. Dependence of quantity λ on polar angle Φ under the inﬂuence of stress (1) < σ11 >, < σ13 > and < σ33 > at inﬁnity

the vicinity of points c1 and c2 is not required. If it is necessary to investigate the concentration of the quantities in the vicinity of these points, we must use more complex quadrature formulas (for example, formulas of Gauss-Jacobi [208, 243] which accurately reﬂect the preliminarily determined singularities of solutions at the nodes.

17

σθ

2 2 3

1

1

–11 π/2

3π/2

ϕ

Fig. 3.20. Changes of stress σθ on the opening contour under the inﬂuence of an (1) electric ﬁeld of type < E1 > and < E3 > with intensity 1V/m

3.6 Green’s Function for a Composite Plate with an Interphase Crack 0.03

117

Es 3 2 2

1

1 0.00

3

3

1

2

–0.03 π/2

ϕ

3π/2

Fig. 3.21. Dependence of quantity ES on polar angle Φ under the inﬂuence of 1 >, < σ13 > and < σ33 > with intensity 1V/m stresses < σ11

3.6 Green’s Function for a Composite Plate with an Interphase Crack To investigate the eﬀects of coupled mechanical and electric ﬁelds in piezoceramic bimorphs with defects of a gap-phase type it is necessary to use Green’s function for a compound (piecewise) piezoceramic plate with an interphase crack. Consider unlimited medium consisting of two heterogeneous piezoceramic halfplanes continuously connected along sx3 = 0, |x1 | ≥ a. On the area prescribed by x3 = 0, |x1 | < a there is a gap which may be considered as an → − interphase crack. Let a concentrated force P = (P1 , P3 ) or concentrated electric charge ρ (Fig. 3.22) be adjusted at the point (x10 , x30 ) of the upper halfspace. Ascribing the upper index “r” (r = 1, 2) to the quantities referring to the r-th halfplane we write down the mechanical and electric boundary conditions

P3

1 2

–α

P1

x3

(x10,x30)

O

x1 a

Fig. 3.22. The bimorph scheme with an interphase crack

118

3 Static Problems

on x1 axis in the form of (1)

(2)

(1)

σi3 = σi3 , (1) (2) E1 = E1 , (1)+ σi3 = 0,

dui

(2)

= dui ,

(1) (2) D3 = D3 , (2)− σi3 = 0, |x1 |

|x1 | ≥ a

(i = 1, 3) ,

(3.57)

−∞ < x1 < ∞, < a,

where σi3 , u1 , E1 , D3 are the corresponding components of the stress tensor, shear vector a and electric stress and induction vectors; σ ± are the limiting values of function σ on the upper (sign “plus”) and lower (sign “minus”) crack edges. Let us assume that the vector of preliminarily polarization of the piezoceramics in the upper and lower halfplane is directed along x3 -axis. Then, → − according to (3.10) the components of vector U = {Uk } = {σ33 , −σ13 , u1 , u3 , E1 , −D3 } read Uk = 2Re

3

ckν Φν (zν )

(k = 1, 2, . . . , 6) ,

(3.58)

ν=1

c1ν = γν , c4ν = qν ,

c2ν = γν μν , c3ν = pν , c5ν = λν , c6ν = rν .

Hence, we come

to solve a boundary problem for the determination of (r) (r) six functions Φν zν each of which is analytical on its complex plane (r)

(r)

zν = x1 + μν x3 (ν = 1, 2, 3; r = 1, 2) according to the conditions of conju(1) gation (3.22) on area |x1 | ≥ a and the conditions U1± = 0, U2± = 0, U5 = (2) (1) (2) U5 , U6 = U6 on the cut edges [−a, a]. The above problem can be solved by applying analytical expansion of the corresponding functions derived by subsequent reduction of it to Riemann problem [50]. In this case we use the fundamental solution for a composite plate without a gap (see Fig. 3.2b). According to the above, the solution is given by

(r) (r) (r) z + Ψ z (ν = 1, 2, 3; r = 1, 2) , (3.59) Wν(r) zν(r) = Φ(r) ν ν ν ν

(r) (r) where the functions Φν zν are determined in (3.24)–(3.26), and function

(r) (r) Ψν zν that depends on the disturbance introduced by an interphase crack must be determined.

(r) (r) At this point we use the concept of the analytical continuation Ψν zν in the following way:

(1) (2) Functions Ψν (z) Ψν (z) can be analytically continued through areas (1)

|x1 | ≥ a in the lower (upper) halfplane with the help of function Ψν (z)

3.6 Green’s Function for a Composite Plate with an Interphase Crack

119

(2) (1)+ (1)− (2)− Ψν (z) which satisfy the relation Ψν (x1 ) = Ψν (x1 ) Ψν (x1 ) = (2)+ Ψν (x1 ) . In this case we consider determination Ψ (z) = Ψ (z), and by Ψ± (x1 ) we imply the corresponding limiting values of function Ψ (z). Based on the above, from (3.58) we get: Uk+ (x1 ) =

Uk− (x1 ) =

3 3

(1) (1)+ (1) (1)− (1) ckν Φ(1) ckν Ψk (x1 ) + ckν Ψk (x1 ) + 2Re ν (x1 ), ν=1

ν=1

(3.60) 3

(2) (2) (2)− (2) (2)+ ckν Ψk (x1 ) + ckν Ψk (x1 ) + 2Re ckν Φ(2) ν (x1 ).

3 ν=1

ν=1

Let us introduce the function ⎧

3 ) ⎪ (1) (1) (2) (2) ⎪ ckν Ψν (z) − ckν Ψν (z) , x3 > 0, ⎨fk (z) = ν=1 Fk (z) =

3 ) ⎪ (2) (2) (1) (1) ⎪ ⎩fk (z) = ckν Ψν (z) − ckν Ψν (z) , x3 < 0,

(3.61)

ν=1

(k = 1, 2, . . . , 6) . Due to the equality (3.58) and the inﬁnite continuation of function Uk (k = 1, 2, 5, 6) through the media interface we obtain fk+ (x1 ) − fk− (x1 ) = Uk+ (x1 ) − Uk− (x1 ) = 0.

(3.62)

Hence, the function Fk (z) (k = 1, 2, 5, 6) with elements fk (z) at Im z > 0 and fk (z) at Im z < 0 are analytical on the full z - planes and they may be assumed to be equal to zero. From relation (3.61) we get the following limiting equalities 3

(1) (2) (2)+ ckν Ψ(1)+ (x1 ) − ckν Ψν (x1 ) = fk+ (x1 ) , ν

ν=1 3 ν=1

(1)

(1)−

ckν Ψν

− (2) (x1 ) − ckν Ψ(2)− (x ) = −fk (x1 ) 1 ν

(3.63) (k = 1, 2, . . . , 6) ,

which due to (3.60), (3.62) and boundary conditions Uk+ = Uk− = 0 (k = 1, 2) result to the following matrix Riemann problem on the interval (−a, a) Bf + (x1 ) − Bf − (x1 ) = R (x1 ) , * * * * * ,b12 ,...,b16 * *N1 * −1 B = bij = *bb11 , R (x ) = = AC *N2 * , * 1 ∗ 21 ,b22 ,...,b26 * * 3 *c(1) ,c(1) ,c(1) ,c(2) ,c(2) ,c(2) * (2) 11 12 13 11 12 13 * = −4Re ckν Φ(2) , N A=* k ν (x1 ) , * (1) (1) (1) (2) (2) (2) * c21 ,c22 ,c23 ,c21 ,c22 ,c23

ν=1

(3.64)

120

3 Static Problems

* * * (1) (1) (1) (2) (2) * *c11 , c12 , c13 , −c(2) , −c , −c 11 12 13 * * * *c(1) , c(1) , c(1) , −c(2) , −c(2) , −c(2) * * 21 22 23 21 22 23 * *, C∗ = * * ........................ * * ........................ * * * * (1) (1) (1) * *c , c , c , −c(2) , −c(2) , −c(2) * 61 62 63 61 62 63

* * *0* * * *0* * ±* *f * ± 3 * f (x1 ) = * *f ± * . * 4* *0* * * *0*

Now let us now choose the vectors (ρk1 , ρk2 ) and the number λk (k = 1, 2) so that they are the eigenvectors and the corresponding characteristic numbers of the following homogeneous system k−1 (3.65) ρk2 b23 + λk b23 = 0 (k = 1, 2), ρk1 b13 + λk b13 + (−1) k−1 ρk1 b14 + λk b14 + (−1) (3.66) ρk2 b24 + λk b24 = 0 (k = 1, 2). Then, the relation (3.64) results to two scalar Riemann problems: − ∗ ρ+ k (x1 ) + λk ρk (x1 ) = Nk (x1 ) ,

where: ρk (x1 ) =

4

dkj fj (x1 ) , dkj =

j=3

Nk∗ = ρk1 N1 (x1 ) + (−1)

k−1

|x1 | < a

(k = 1, 2),

2iIm b1j b2j b2j + λk b2j

(3.67)

(j = 3, 4) ,

ρk2 N2 (x1 ) .

The characteristic numbers λ1 , λ2 appearing in (3.67) can be found from the conditions of the non-trivial solvability of the system (3.65), (3.66). These conditions are brought to the following quadrature equations λ21,2 + 2r1 λ1,2 + r2 = 0, Re b13 b24 − b23 b14 r1 = , b13 b24 − b14 b23

(3.68) r2 =

b13 b24 − b23 b14 . b13 b24 − b14 b23

It is obvious that the roots of (3.68) may be represented as 1 −iϑ e , λ2 = Re−iϑ , R ImR = 0, 0 ≤ ϑ < 2π. λ1 =

1 ϑ = − arg r2 , 2

(3.69)

Solving the problem (3.67) we ﬁnd ρk (z) = {Dk (z) + Mk } Xk (z) (k = 1, 2) , a 1 Nk∗ (x) dx , Dk (z) = 2πi (x − z) Xk (x) −a

−γ

γ −1

Xk (z) = (z + a) k (z − a) k , ϑ i 1 + nR, γ2 = γ1 , γ1 = − 2 2π 2π

(3.70)

3.6 Green’s Function for a Composite Plate with an Interphase Crack

121

where Xk (x) = Xk+ (x) are the values of the canonical function Xk (z) on the upper cut edge, and Mk are arbitrary complex constants. To ﬁx these constants it is necessary to render the shear vector continuous through |x1 | ≥ a (the conditions of conjugation consist of derivatives from displacements). This condition is fulﬁlled if M1 and M2 are connected by M2 = λ1 M1 . Further, let us apply the conditions of the displacements homogeneity on a composite plane a

dui = − c

d [ui ] = 0

(i = 1, 2) ,

(3.71)

−a

where c is a closed contour covering section [−a, a] of x1 -axis, [u] is a jump of function u while crossing the cut. By introducing the expression ui (x1 ), using (3.58) and relations (3.59), (3.70) and after applying some transformations we ﬁnd Mi = (m)

3 2 (1) (m) (1) (m) Am Ωi1 + Am Ωi2 1 + λi m=1 (m)

Ω11 = Ω22 = − (m)

(m)

Ω21 = Ω12 = ρk2 = (−1)

k

3 2 ν=1 j=1

3 2 ν=1 j=1

(2) (1)

ρ1j cjν αν+3,m j

(i = 1, 2) , (m = 1, 2, 3) ,

(2) (1)

(−1) ρ2j cjν αν+3,m ,

b13 + λk b13

b23 + λk b23

(3.72)

−1

ρk1 = 1, (k = 1, 2) .

Now let us derive the sought-for functions by fk (z) from (3.61). We have Ψ(1) ν (z) =

4

lνj fj (z), Imz > 0

(ν = 1, 2, 3) ,

(3.73)

j=3

Ψ(2) ν (z) = −

4

lν+3,j fj (z) , Imz < 0,

j=3

where lmj (m = 1, 2, . . . , 6; j = 3, 4) are the elements of matrix C∗−1 . Substituting the functions f3 (z) , f4 (z), found from (3.70), fulﬁlling the necessary quadratures and using (3.72) we ﬁnally get

⎧⎡ ⎤ (r) (1) 3 2 ⎨ 1 − Xn z ν

Xn−1 zm0 ⎣ zν(r) = + Xn zν(r) ⎦ Ψ(r) ν (r) (1) ⎩ z − z ν m=1 n=1 m0 (m)

(r) (1) Am + Ωn1 γnν

122

3 Static Problems

⎤

(r) (1) −1

z X z 1 − X ν n n m0 ⎥ (m) (r) (1) ⎢ +⎣ + Xn zν(r) ⎦ Ωn2 γnν Am , (r) (1) zν − zm0 ⎡

(r) = γnν

L(1) nν =

(r)

2Lnν , (1 + λn ) d0 4

d0 = d13 d24 − d14 d23 ,

(−1)n−j mnj lνj , L(2) nν = −

j=3

mn3 =

(3.74)

4

(−1)n−j mnj lν+3,j ,

j=3

d14 d24 , dn4

mn4 =

d13 d23 dn3

(ν = 1, 2, 3; r = 1, 2) .

Thus, the Green’s function, for a composite piezoceramic plane with an interphase crack, is determined in the explicit form by relations (3.59), (3.24) and (3.74). From the analytical representation of Green’s function it follows that the mechanical stresses and also the components of the electric ﬁeld on the tips of an interphase crack posses power singularities strengthened by oscillations in the small vicinity of the points x1 = ±a. This phenomenon takes place also in the case of composite isotropic media [196]. To determine the stress intensity factors on the tips of interphase cracks we keep in expressions (3.74) only those terms that contain canonical functions Xn (z). Then in the vicinity of points x1 = ±a we have: at x1 > a γn . - 3 2 (1) γ −1

(x1 − a) n zm0 + a (r) (m) (1) Vk =4Re Am Ω1n Dkn +1 (1) (2a)γn z −a m=1 n=1 m0

+O (1) ,

(3.75)

at x1 < −a

⎧ ⎡ 1−γn ⎤⎫ 3 2 (1) ⎬ ⎨ (x + a)−γn

− a z 1 (r) (m) m0 ⎦ ⎣ Vk =− 4Re A(1) Ω D +1 kn m (1) ⎭ ⎩ (2a)1−γn 1n zm0 + a m=1 n=1 +O (1) ,

where: (r)

V1

(1)

(r)

= σ33 ,

Dk1 =

3 4 ν=1 j=3

(r)

V2

(r)

= −σ13 (1)

(r = 1, 2) ,

(−1)j−1 ckν lνj m1j ,

Dk2 = Dk1 ,

(1)

Dk1 = Dk1 d−1 0 . (r)

As one would expect, the obtained expressions for Vk on r.

do not depend

3.6 Green’s Function for a Composite Plate with an Interphase Crack

123

The stress intensity factors are determined according to the above out asymptotic in the following way. On the tip x1 = a:

Kj+ = im

!

x

/ ϑ 12 + 2π Λ # +$ −1 σj (x1 ) = Kj , a ah 1

x1 → a

σ1 (x1 ) = σ33 , σ2 (x1 ) = σ13 , ⎧ 2 ⎫− 12 ⎨ ⎬ ρ (1) 2 2 Bm = hA(1) + P + , P m 3 (1) ⎩ 1 ⎭ d

(x1 > a) ,

(3.76)

33

3 2 (m) # +$ Ω1n Djn (1) Kj = 4Re Bm 2 γn m=1 n=1

(1)

zm0 + a

γn

(1)

zm0 − a

+1

(j = 1, 2) .

On the tip x1 = −a: ! / ϑ 12 − 2π Λ # −$ x1 − Kj = im + 1 Kj , x1 → −a (x1 < −a) , σj (x1 ) = a ah ⎫ ⎧ 3 2 (m) ⎬ ⎨ z (1) − a 1−γn # −$ Ω D jn (1) 1n m0 Kj = −4Re Bm + 1 . (3.77) ⎭ 21−γn ⎩ z (1) + a m=1

0.090

n=1

m0

I 1

0.054

3

0.018 2 –0.018

–0.054 1 –0.090 0.0

ε 1.8

1.6

2.4

3.2

4.0

Fig. 3.23. Changes of < KI± > as a function of parameter ε = H/a for various types of loading (the material of the lower halfplane is PZT-5, the upper is BaTiO 3

124

3 Static Problems II

0.090

3 0.054 2

0.018 1 –0.018

2

–0.054 3

ε

–0.090 0.0

0.8

1.6

2.4

3.2

4.0

± Fig. 3.24. Changes < KII > as a function of parameter ε = H/a for various types of loading (the material of the upper halfplane is BaTiO3 , the lower is PZT-5)

(1) In (3.76), (3.77) Λ = P at P = P12 + P32 > 0, ρ = 0 and Λ = ρ/d33 at ρ = 0, P = 0. On calculating the given limits, as in [196], was assumed that Imγ1 · n |x1 ± a| ≈ 0. The calculations conﬁrm the validity of this approximate equality. In the “microscopic” vicinity of the tip, their physical incorrectness of the solutions

0.15

I 3

0.10 1

0.05 2

0.00

–0.05 1

ε

–0.10 0.0

KI±

0.8

1.6

2.4

3.2

4.0

Fig. 3.25. Changes of < > as a function of parameter ε = H/a for various types of loading (the material of the upper halfplane is BaTiO3 , the lower is PZT-5)

3.7 A Case of an Inner Crack Reaching the Interphase

0.10

125

II 3

0.05 2

0.00 1

2

–0.05 3

–0.10 ε

–0.15 0.0

0.8

1.6

2.4

3.2

4.0

± KII

Fig. 3.26. Changes < > as a function of parameter ε = H/a for various types of loading (the material of the upper halfplane is BaTiO3 , the lower is PZT-5)

connected with the fact that the stresses change the sign an inﬁnite number of times. As an example lets consider a pair of PZT-5 (the material of the upper halfplane), BaT iO3 (the material of the lower halfplane) with interface crack x3 = 0, −a < x1 < a, subjected to a concentrated force (P1 , P3 ) or to a charge ρ at point# x10$ = 0, #x30 = $ H > 0. Changes of the relative stress ± in the function of parameter ε = H/a intensity factors KI± and KII are shown in Figs. 3.23 and 3.24, where curves 1, 2 and 3 correspond to P1 = 0, P3 = ρ = 0; ρ = 0, P1 = P3 #= 0 $and P3 = 0, P1 = ρ# = 0, $ respectively. The solid curves correspond to KI− , and dashed lines to KI+ . If we exchange the places the results change. # ± components, $ # of$ the pair for this case. In the calculations Figs. 3.25 and 3.26 show the KI± and KII it was assumed that P/h = 1, ρ/h = 1.

3.7 A Case of an Inner Crack Reaching the Interphase In this section we derive a system of integral equations when in the upper halfplane of the piezoceramic bimorph a crack-like defect L exists. Te defect L “touches” the crack that exists on the interphase (Fig. 3.27). Let us assume that there are no forces on the inner and interphase cracks and that stresses (1) < σ11 >, < σ13 >, < σ33 > are prescribed at inﬁnity. To obtain the integral representations of the complex potentials in this case let us use the built in Par. 3.6 Green’s function for a compound piezoceramic

126

3 Static Problems

x3 1 2

O

L

b x1

c

–a

a

Fig. 3.27. The bimorph scheme with a crack reaching the interphase

plane with an interphase crack. Allowing for formulas (3.24), (3.28) and (3.74) at r = 1 we write 3 (1) (1) (1)

ων (ζ) dζν βνm ωm (ζ)dζm 1 (1) (1) (1) Φν zν = Bν + + , (3.78) (1) (1) (1) (1) 2πi 2πi ζν − zν ζ − z m=1 m ν L L ⎧ 3 2 ⎨

1 (m) (1) (1) (1) zν(1) = Ωn1 γnν ωm (ζ) Gn zν(1) , ζm dζm − Ψ(1) ν 2πi m=1 n=1 ⎩ L ⎫ ⎬

(1) (m) (1) (1) dζm , − ωm (ζ)Gn zν(1) , ζm Ωn2 γnν ⎭ L

1 − Xn (x) Xn−1 (y) − Xn (x) Gn (x, y) = y−x

(ν = 1, 2, 3) .

The canonical functions Xn (x) appearing in (3.78) are determined in (1) (3.70); ων (ζ) are the functions that have to be calculated the constants Bν reﬂect the prescribed conditions at inﬁnity. Thus, representations (3.78) provide the automatic fulﬁllment of the conjugation conditions on the media interphase. The mechanical and electric boundary conditions on

L may be represented (1) (1) ζν (ν = 1, 2, 3) it in the form of (3.23), however instead of functions Φν

(1) (1) (1) is recommended to take the limiting values of functions Wν zν = Φν

(1) (1) (1) zν + Ψν zν , determined allowing for representations (3.78).

(1) (1) By substituting of the limiting values of function Wν zν in conditions (3.23) we get a mixed system of real singular and algebraic equations L 3 Re ωm (ζ) gmp (ζ, ζ0 ) ds = fp (ζ0 ) (p = 1, 2) , (3.79) m=1 L

Re

3 m=1

bnm (ζ) ωm (ζ) = 0

(n = 1, 2, . . . , 4) ,

3.7 A Case of an Inner Crack Reaching the Interphase

1 gmp (ζ, ζ0 ) = πi −

b0pm (1)

(1)

ζm − ζm0

3

(1) b0pν βνm

ν=1

ζm − ζν0

(1)

(1)

−

+

3 2 ν=1 k=1

3 2 ν=1 k=1

127

(m) (1) (1) (1) − b0pν Ωk1 γkν Gk ζν0 , ζm

(m) (1) b0pν Ωk2 γkν Gk

(1) (1) ζν0 , ζm a(1) m (ψ) ,

(1) σ11

> cos ψ0 − < σ13 > sin ψ0 , f1 (ζ0 ) = − < f2 (ζ0 ) =< σ13 > cos ψ0 + < σ33 > sin ψ0 , b0nν = bnν (ζ0 ) ,

(1) ζm = Reζ + μ(1) m Imζ;

ζ, ζ0 ∈ L.

Here the kernels gmp (ζ, ζ0 ) are singular (of Cauchy type), ψ is the angle between the normal to the left edge L and axis Ox1 , the function bnm (ζ) is determined in (3.23). The stress at the tip of crack b has a singularity of quadrature root type and at tip c they are restricted. Therefore the numerical solution of integral and algebraic (3.79) should be found in the function class not bounded at tip a and bounded at tip c [121].

This page intentionally blank

4 Diﬀraction of a Shear Wave on Tunnel Cracks in Media of Various Conﬁgurations (Antiplane Deformation)

In this chapter we investigate the diﬀraction of a shear wave on tunnel defects of crack type in piezoceramic media. Stationary and non-stationary dynamic problems of electro-elasticity are reduced, with the help of the corresponding Green’s functions, to singular integral equations of the ﬁrst kind. By asymptotic analysis of the integral representations of the solutions, the equations for the factors of stress shear intensity at the crack tips are obtained.

4.1 An Anisotropic Space The increasing need for the development of modern and sophisticated technologies in the areas of material science and engineering stimulates the design and manufacturing of new composite anisotropic materials with respect to elastic and other physical properties. The anisotropy inﬂuences the strength of the constructive elements, as well as the parameters of failure of such elements if crack-like defects exist. In order to investigate the inﬂuence of a) the character of anisotropy, b) the conﬁguration of the crack and its orientation (to the main axes of anisotropy on) the stress intensity factor we consider the stationary dynamic problem in the framework of elasticity for a piecewise-homogeneous anisotropic medium. Referring to Cartesian coordinates Ox1 x2 x3 let an elastic anisotropic media be weakened by tunnel along axis x3 curvilinear cracks-cuts Lj (j = 1, 2, . . . , k). Let us assume that a plane monochromatic shear wave radiates from inﬁnity to the cracks and on their surfaces a harmonically changing with time, inde- ± ± ± = X2n = 0, X3n = Re X3± e−iωt pendent on coordinate x3 stress vector X1n is possibly given Assume that at each point of the medium, there exists a plane of elastic symmetry perpendicular to x3 -axis; Lj are the simple disconnected older condition, and X3 = ares (∩Lj = Ø) with curvatures satisfying the H¨ k X3+ = −X3− is the function of H class on L = Lj . j=1

130

4 Diﬀraction of a Shear Wave

Under the given conditions in an anisotropic medium, a stationary wave process corresponding to the state of antiplane deformation takes place. The full system of the equations of the stated boundary problem includes the following basic relations [134, 135] ∂ 2 u3 ∂ , ∂m = (m = 1, 2) , ∂t2 ∂xm = c44 ∂2 u3 + c45 ∂1 u3 , σ13 = c45 ∂2 u3 + c55 ∂1 u3 ,

∂1 σ13 + ∂2 σ23 = ρ σ23

±

(σ13 cos ψ + σ23 sin ψ) =

± X3n .

(4.1) (4.2) (4.3)

Here (4.1) is the motion equation, (4.2) are the equations of medium state, (4.3) is the condition on the surface; cij are the moduli of the material elasticity; ρ is the density of the medium; ψ is the angle between the normal to the left edge Lj (when it moves from the beginning aj to the end bj ) and Ox1 -axis (Fig. 4.1). The wave displacement ﬁeld in a medium with cracks consists from the (0) and the ﬁeld of the dispersed ﬁeld of incoming monochromatic wave u3 defects (u∗3 ). Therefore, we write

u∗3 = Re U3∗ e−iωt ,

(0)

u3 = u3 + u∗3 ,

(4.4)

(0)

where the displacement amplitude U3 in the wave is determined by (0) (0) (0) u3 = Re U3 e−iωt , U3 = τ ei(α1 x1 +α2 x2 ) , α1 = −γ cos β,

α2 = −γ (Reμ cos β + Im μ sin β) , Δ ω , Δ = c44 c55 − c245 > 0, γ= , c= c ρc44 √ −c45 + i Δ μ= . c44

(4.5)

Here β is the angle between the normal to the front wave and Ox1 -axis; γ is the wave number. As it follows from (4.5) the characteristic number μ is imaginary.

X2 bj L1

– +

n

β

ψ Lj aj

O

X1

Fig. 4.1. A space containing curvilinear cracks

4.1 An Anisotropic Space

131

From (4.1), (4.2) the diﬀerential equation for the amplitude of shear displacement reads c55 ∂12 U3 + 2c45 ∂1 ∂2 U3 + c44 ∂22 U3 + ρω 2 U3 = 0.

(4.6)

The boundary condition (4.3) for an arbitrary point (ξ10 , ξ20 ) ∈ Lj on the right and left edges of the cut has the following form. a (ψ0 )

∂U3 ∂ζ10

± − a (ψ0 )

a (ψ0 ) = μ cos ψ0 − sin ψ0 ,

∂U3 ∂ζ 10

±

i = ± √ X3± (ζ0 ) , Δ

ψ0 = ψ (ζ0 ) ,

ζ10 = ξ10 + μξ20 ,

ζ 10 = ξ10 + μξ20 ,

ξ0 = ξ10 + iξ20 ,

∂ μ∂1 − ∂2 , = ∂z1 μ−μ

∂ μ∂1 − ∂2 , = ∂z1 μ−μ

z1 = x1 + μx2 .

(4.7)

The diﬀerential (4.6) and the boundary conditions (4.7) represent a boundary value problem for the determination of the displacement amplitude U3∗ . In order to bring the problem to an integral equation, the correct integral forms of the solutions must be constructed in such way that insures the existence of the displacement jump u∗3 , and also the continuity of the stress vector on crossing cut Lj (j = 1, 2, . . . , k). Besides, these representations satisfy the conditions of radiation [69] at inﬁnity. To avoid the procedure of normalization of spreading on the contours of integral cuts we must construct the integral representations of the displacements derivatives. Let us consider together with the main state of the system, the subsidiary state, characterized by the presence, at a certain point of area (x10 , x20 ) of a concentrated functional δ(x1 − x10 , x2 − x20 ). Calculating the sums of production of the diﬀerential (4.6) for the i-th state on the corresponding derivative from the displacement amplitude j-th state i = j, i, j = 1, 2, we obtain the expression of the divergence type. Carrying out the integration in D occupied by the body, by subsequent application of Green’s formulas [168] and after some transformations we ﬁnally ﬁnd [118] ∂U3∗ = ∂z10 ∂U3∗ = ∂z 10

∂E i 2√ + γ Δa (ψ)q (ζ) E ds, c44 a (ψ) p (ζ) ∂ζ1 2

L

∂E i 2√ − γ Δa (ψ) q (ζ) E ds, c44 a (ψ) p1 (ζ) 2 ∂ζ 1

L

(4.8)

132

4 Diﬀraction of a Shear Wave

where, p (ζ) = μ ¯ [∂1 U3∗ ] − [∂2 U3∗ ] , q (ζ) = [U3∗ ] ,

p1 (ζ) = μ [∂1 U3∗ ] − [∂2 U3∗ ] ,

[Φ] = Φ+ − Φ− ,

i (1) E = E (ξ1 − x10 ; ξ2 − x20 ) = − √ H0 (γr) , 4 Δ r = |ζ1 − z10 | , ζ1 = ξ1 + μξ2 ,

z10 = x10 + μx20 , (ξ1 , ξ2 ) ∈ L,

z 10 = x10 + μ ¯x20 ,

(x10 , x20 ) ∈ D.

In (4.8) the functions p (ζ) , p1 (ζ) and q (ζ) are the “densities” to be de(1) termined; Hν (x) is the ν-th order Hankel’s function [22, 109, 166] of the ﬁrst kind, E (ξ1 − x10 ; ξ2 − x20 ) are the fundamental solutions [43] of the differential (4.6) while ds is the element of the arc-length of contour L The integral representations (4.8) are obtained by using the methods of the theory of potentials [98]. In the same way we obtain the representation for the displacement amplitude, given by

∂U3∗ ∂U3∗ ∗ E μa (ψ) +μ ¯a (ψ) + (4.9) U3 (x10 , x20 ) = c44 ∂ζ1 ∂ζ1 L

∂E ∂E ∗ + [U3 ] μ ¯ a (ψ) + μa (ψ) ds. ∂ζ1 ∂ζ1 Here we must note that (4.9) actually guarantees the existence of the displacement jump on Lj (j = 1, 2, . . . , k) and also the fulﬁllment of the radiation conditions. Equations (4.8) must satisfy the requirements of continuity of the stress vector when crossing Lj . Let us write them in the form of a sum of singular and regular parts [175] as follows: γ n ∂ (1) H (γr) = − e−inα Hn(1) (γr) , 0 ∂z n 2 γ n ∂ n (1) einα Hn(1) (γr) , n H0 (γr) = − ∂z 2 γ 2 (1) ∂2 (1) H0 (γr) = − H0 (γr) , ∂z∂ z¯ 4 r = |z − z0 | ,

α = arg (z − z0 ) ,

z = x1 + ix2 ,

z0 = x10 + ix20 .

γ = const > 0,

(4.10)

4.1 An Anisotropic Space

133

As a result we get

∂U3∗ p (ζ) dζ1 c44 √ = − (4.11) ∂z10 ζ1 − z10 4π Δ L

c44 γ (1) −iα √ a (ψ) e p (ζ) H1 (γr) − iγq (ζ) a (ψ)H0 (γr) ds, − 8i Δ L

∂U3∗ p1 (ζ) dζ1 c44 √ = − ∂z10 ζ¯1 − z¯10 4π Δ L

c44 γ (1) iα √ a (ψ)e p1 (ζ) H1 (γr) + iγq (ζ) a (ψ) H0 (γr) ds, − 8i Δ L

2i (1) H1 (γr) = + H1 (γr) , πγr

α = arg (ζ1 − z10 ) .

By applying the formulas of Sohotsky-Plemmely for the generalized integrals of Cauchy type, the limiting values of the derivatives (4.11) at z10 → ζ10 ∈ L (L is the image L on the aﬃne z1 -plane) read ⎡ ⎣ 1 2πi ⎡ ⎣ 1 2πi

L

L

⎤±

1 ω (ζ0 ) ω (ζ) dζ1 ⎦ ω (ζ) dζ1 + =± , ζ1 − z10 2 2πi ζ1 − ζ10 ⎤±

1 ω (ζ) dζ 1 ⎦ ω (ζ0 ) + =∓ 2 2πi ζ 1 − z 10

(4.12)

L

L

ω (ζ) dζ 1 . ζ 1 − ζ 10

By calculating the diﬀerence of the harmonic expressions (4.7) which correspond to the left and the right edges L under the condition X3 = X3+ = −X3− we get iIm μ dU3∗ iIm μ dU3∗ p (ζ) = − , p1 (ζ) = . (4.13) a (ψ) ds a (ψ) ds Hence, using expressions (4.13) in representations (4.8) a single “density” appears, with respect to the displacement jump amplitude [U3∗ ] on L. Thus, satisfying the boundary condition (4.7) on any of the edges L (for example, on the left one) we derive a singular integro-diﬀerential equation of the ﬁrst kind with respect to function [U3∗ ]

∗ dU3 g (ζ, ζ0 ) ds + [U3∗ ]G (ζ, ζ0 ) ds = N (ζ0 ) , ds L

g (ζ, ζ0 ) =

L

a (ψ0 ) 1 γ Re + H1 (γr0 ) Re a (ψ0 ) e−iα0 , πi ζ1 − ζ10 2

(4.14)

134

4 Diﬀraction of a Shear Wave

γ 2 (1) H0 (γr0 ) Re a (ψ0 ) a (ψ) , 2 2i N (ζ0 ) = √ X3 (ζ0 ) − 2γτ Im a (ψ0 ) e−iβ ei(α1 ξ10 +α2 ξ20 ) , Δ

s ∗ dU3 [U3∗ ] = ds, r0 = |ζ1 − ζ10 | , α0 = arg (ζ1 − ζ10 ) . ds

G (ζ, ζ0 ) =

0

where the point (ξ10 , ξ20 ) ∈ Lj (j = 1, 2, . . . , k); the kernel G (ζ, ζ0 ) has a logarithmic singularity, the kernel g (ζ, ζ0 ) consists of a singular component (Kernels of Cauchy type) and of a component due to the assumptions about L not more than a weak singularity. For the unique solvability of (4.14) in a function class with derivatives not limited in the vicinity of the ends of cracks Lj [81, 121] it is necessary to add the following additional conditions to it:

∗ dU3 ds = 0 (j = 1, 2, . . . , k) . (4.15) ds Lj

Conditions (4.15) regulate the equality to zero of the displacement jumps on tips L = ∪Lj . In order to construct the asymptotic of stresses we will proceed from the formulas determining the behavior of integrals of Cauchy type in the vicinity of ends L in case when the density has a power singularity [50] ⎧ σπi ∗ e λ (a) (z − a)−σ ⎪ ⎪

+ Φ1 (z) , z ∈ O (a) , ⎨ 2i sin πσ λ (ζ) dζ 1 = (4.16) ⎪ 2πi ζ −z e−σπi λ∗ (b) (z − b)−σ ⎪ ⎩ + Φ (z) , z ∈ O (b) , − 2 L 2i sin πσ λ (ζ) =

λ∗ (ζ) σ, (z − c)

σ = κ1 + iκ2 ,

0 ≤ κ1 ≤ 1.

For the function Φm (z) the following relations hold: im Φ1 (z) (z − a)σ = 0,

z→a

im Φ2 (z) (z − b)σ = 0. z→b

From asymptotic analysis of the integral (4.14) in the vicinity of the cut tip on integrating line L it is not diﬃcult to deduce that σ = 1/2. Therefore, by introducing the parameterization of the crack contour as ζ = ζ (δ), it is possible to assume that ∗ Ω0 (δ) dU3 p∗ (ζ) √ = , (4.17) = ds s (δ) 1 − δ 2 (ζ − a) (ζ − b) ds > 0, Ω0 ∈ H [−1, 1] . s (δ) = dδ

4.1 An Anisotropic Space

135

On the basis of formulas (4.16), (4.17) the asymptotics of the generalized integrals of Cauchy type are given by ∗ ⎧ dU3 Ω (−1) R (−1) ⎪

dζ1 + Φ1 (z10 ) , z10 ∈ O (a1 ) , ⎨ 0√ ds 1 z −a = Ω (1)10R (1)1 (4.18) 0 ⎪ 2πi ζ1 − z10 ⎩ + Φ (z ) , z ∈ O (b ) , 2 10 10 1 L b1 − z10 ⎧ ∗ (−1)R (−1) ⎪ dU3 ⎪− Ω0√ + Φ∗1 (z10 ), z10 ∈ O (a1 ) , ⎪

dζ1 ⎨ z 10 − a1 ds 1 = ⎪− Ω 2πi 0 (1)R (1) + Φ∗2 (z10 ), z10 ∈ O (b1 ) , ζ1 − z 10 ⎪ ⎪ L ⎩ b1 − z 10 1 a (ψ (±1)) , ζ1 = ζ1 (δ) , a1 = ζ1 (−1) , b1 = ζ1 (1) . R (±1) = 2 2s (±1) Allowing for (4.11), (4.13) and (4.18) and applying the equation of state (4.2) we can express the main asymptotic shear stresses in the vicinity of the cut tips as follows ⎧ μ Re e−iωt Ω0 (−1) c44 Imμ ⎪ ⎪ Im , z ∈ O (a) , ⎨ 2 2s (−1) a [ψ(−1)] (z10 −a1 ) σ13 = (4.19) μ Re e−iωt Ω0 (1) ⎪ 44 Imμ ⎪ ⎩− c Re , z ∈ O (b) , 2 2s (1) a [ψ (1)] (z10 − b1 ) −iωt ⎧ Ω0 (−1) c44 Imμ Im Re e ⎪ ⎪ − , z ∈ O (a) , ⎨ 2 2s (−1) [ψ (−1)] (z10 − a1 ) a−iωt σ23 = Re e Ω0 (1) ⎪ 44 Imμ ⎪ ⎩ c Re , z ∈ O (b) . 2 2s (1) a [ψ (1)] (z10 − b1 ) The shear stress on the continuation over the crack tips have the form of √ ΔRe e−iωt Ω0 (±1) σn = σ13 cos ψ (±1) + σ23 sin ψ (±1) = ± . (4.20) 2 2r∗ s (±1) Here r∗ = |z − c|, where c is the tip; the lower sign refers to the beginning of the cut c = a, the upper one to the end c = b. The stress intensity factor KIII is determined by [138, 159] √ KIII = im 2πr∗ σn . (4.21) ∗ r →0

From the expressions (4.20), (4.21) it follows that the tip KIII is the functional determined by the solution of the integro-diﬀerential (4.14). This condition permits the solution of the inverse (optimization) problem of the control of breakage parameters in the bodies with cracks, using the solution of the corresponding direct problems [172].

136

4 Diﬀraction of a Shear Wave

As an example let us consider an anisotropic space containing a singular crack L1 , the contour of which has the form of a parabola (ξ1 = δ, ξ2 = p∗ δ 2 , break − 1 ≤ δ ≤ 1) or a sinusoid (ξ1 = (1 + δ) /2, ξ2 = 0.2 sin νπξ1 ) for the case where a shear wave comes from inﬁnity, along the negative direction of values referring to axis x2 (β = π/2). In Table 4.1 are given the approximate √ ± 0 stress intensity factors KIII = Δ |Ω0 (±1)| / 2S23 s (±1) for diﬀerent relations of the elastic modules of the ﬁctitious materials as functions of normalized wave number γ. ± is known the stress intensity factor Assuming that the quantity KIII may be determined by √ ± ± 0 KIII KIII cos (ωt − arg Ω0 (±1)) , = ± π S23 0 where S23 = |τ | γc44 is the modulus of the stress amplitude σ23 in the shear wave. ± Figure 4.2 shows changes of KIII as a function of γ in the case of the diﬀraction of a shear wave (β = π/2) on a sinusoidal crack (the value of parameter ν corresponds to the curve number). √ ± = Δ |Ω0 (±1)| / 4.3 demonstrates illustrates graphs of KIII Figure 2 |X3 | s (±1) in the case where (a) there is no wave and, (b) harmonically changing time-dependent shear forces act on the edges of the sinusoidal crack (X3 = const, τ = 0). The parameter values of the anisotropic material were taken to be equal c45 /c44 = 0, c55 /c44 = 3. The solid and dashed lines correspond to the tips of cracks a1 and b1 respectively. The dependence of the factor KIII on the orientation angle of crack ϕ has characteristic extremal properties. Fig. 4.4 illustrates the behaviour

Table 4.1. The approximate values for the stress intensity factors referring to diﬀerent relations of the elastic modules of ﬁctional materials as a function the normalized wave number γ

c44 = 1, c55 = 4, c45 = 0 ∗

p = −0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

0.968 0.978 1.003 1.042 1.097 1.171 1.267 1.386 1.522 1.652 1.732

∗

p = 0.5 0.968 0.978 1.000 1.034 1.077 1.128 1.187 1.248 1.299 1.316 1.268

c44 = 1, c55 = 6, c45 = 0.5 p∗ = 0.5 − KIII

1.153 1.164 1.187 1.217 1.251 1.287 1.318 1.334 1.311 1.218 1.052

0.876 0.885 0.910 0.948 1.000 1.069 1.158 1.264 1.370 1.429 1.382

+ KIII

p∗ = −0.5 − KIII

0.876 0.886 0.912 0.955 1.018 1.107 1.228 1.383 1.555 1.690 1.699

1.153 1.165 1.192 1.235 1.297 1.385 1.505 1.662 1.842 1.988 2.007

+ KIII

4.1 An Anisotropic Space

137

±> < KIII

1.600

1

1.225

2 2 3

0.850

4

4

0.475

γl

0.100 0.00

1.25

2.50

3.75

5.00

K± III

Fig. 4.2. Changes of quantity < > as a function of normalized wave number γl for various forms of sinusoidal crack under the inﬂuence of the shear wave

± in the case of a linear crack ξ1 = δ cos ϕ, ξ2 = of the quantity KIII δ sin ϕ (−1 ≤ δ ≤ 1) when τ = 0, X3 = const. The curve indexed by the number m is constructed for γ = 1 + 0.3 (m − 1) , c45 /c44 = 0, c55 /c44 = 5. From the analysis, it follows that the intensity factor depends strongly on the frequency of the harmonic excitation, the anisotropy of materials, the crack curvature and also its orientation on the main axes of the anisotropy.

2.0

III 4

1.5 3 1.0 2 0.5 1 0.0 0.00

1.25

K± III

2.50

γl 3.75

5.00

Fig. 4.3. Change of quantity < > as a function of normalized wave number γl for various forms of sinusoidal crack under the inﬂuence of shear forces

138

4 Diﬀraction of a Shear Wave 1.30

±> < K III

1.05 1 2

0.80 3 4

0.55 5 6 0.30 0.0

ϕ π/8

π/4

3π/8

π/2

Fig. 4.4. Changes of quantity < K± III > as a function of the orientation angle of crack φ for various values of parameter γl

4.2 A Piezoceramic Space Let us now consider an unrestricted piezoceramic medium (a piezoelectric hexagonal class of 6mm [25]) in the Cartesian Ox1 x2 x3 coordinates weakened by tunnel curvilinear cracks along the axis of symmetry x3 , symbolized as Lj (j = 1, 2, . . . , k). Assume that on the surface of cracks, a constant, along x3 - axis and harmonically with time, stress vector of the form changing ± ± ± X1n = X2n = 0, X3n = Re X3± e−iωt is given and from inﬁnity a plane (0)

(0)

monochromatic shear wave u3 = Re U3 e−iωt possibly radiates. The same assumptions made in Sect. 4.1 about cuts Lj and functions + − = −X3n hold. It is necessary to determine the wave electric ﬁeld X3n = X3n under the conditions of anti-plane deformation of a piezoelectric medium with cracks. The full system of equations includes the equation of motion (4.1), the material equations of the medium σm3 = cE 44 ∂m u3 − e15 Em ,

Dm = e15 ∂m u3 + ε11 Em

(m = 1, 2)

(4.22)

and Maxwell-Lorentz equations [104, 129, 167] which in the given case read ∂1 E2 − ∂2 E1 + μ

∂H3 = 0, ∂t

∂1 D1 + ∂2 D2 = 0,

(4.23)

∂D1 ∂D2 , ∂1 H3 = − . ∂t ∂t Where E1 , E2 , H3 and D1 , D2 are the corresponding components of the strength vector of electric and magnetic ﬁelds, and also of electric inducε tion; cE 44 , e15 and 11 are shear moduli measured at constant values of the ∂2 H3 =

4.2 A Piezoceramic Space

139

electric ﬁeld, while the piezoelectric constant and dielectric permeability, are measured at ﬁxed deformations, respectively; μ is the magnetic permeability of the medium. It is assumed that there are no external charges and that the speciﬁc conductance of the medium is equal to zero. The electromagnetic edge conditions on the cut boundaries read [115, 152] Es+ = Es− ,

Dn+ = Dn− ,

Hs+ = Hs− ,

Bn+ = Bn− ,

− → → − B = μH ,

(4.24)

where Es and Hs are the tangential components of the vectors of the electric and magnetic strength, and Dn and Bn are the normal components of the vectors of electric and magnetic inductions. Conditions (4.24) express the circumstances under which the corresponding components of an electromagnetic ﬁeld do not undergo jumps when crossing the cuts Lj . Further, all the calculations are performed in the electromagnetic system of units. Let us introduce the function Φ deﬁned by the formulas [139] e15 ∂1 u3 + ∂2 Φ, ε11 ∂Φ H3 =ε11 . ∂t

E1 = −

E2 = −

e15 ∂2 u3 − ∂1 Φ, ε11

(4.25)

Substituting from (4.22) the expressions for the stresses σ13 , σ23 into the equation of motion (4.1) and considering (4.25) we get the wave equation 1 ∂ 2 u3 = 0, c2∗ ∂t2 cE 44 2 ), c∗ = (1 + k15 ρ

∇2 u3 −

(4.26) 2 k15 =

e215 . ε11 cE 44

Here c∗ is the shear wave velocity in a piezoelectric medium, k15 is the factor of electromagnetic coupling [115]. In the same way from the ﬁrst (4.23) we obtain ∇2 Φ −

1 ∂ 2Φ = 0, c2α ∂t2

1 cα = ε . μ 11

(4.27)

It should be noted that the quantity cα which is the velocity of the electromagnetic wave propagation in a piezoelectric medium is much higher than the velocity of the acoustic waves. Therefore in the case of not very large cuts (the length of a cut is considerably smaller than the length of electromagnetic waves) the second compound in (4.27) may be neglected. The determination of the function Φ using the quasi-static approximation described in [140] is achieved with the help of the equation ∇2 Φ = 0.

(4.28)

140

4 Diﬀraction of a Shear Wave

Due to (4.22) and (4.25) we have 2 σ13 = cE 44 1 + k15 ∂1 u3 − e15 ∂2 Φ, 2 σ23 = cE 44 1 + k15 ∂2 u3 + e15 ∂1 Φ, u3 =

(0) u3

u∗3 ,

+

D1 =ε11 ∂2 Φ, D2 = −

ε11

(4.29)

∂1 Φ,

D3 = 0.

Here the quantity u∗3 characterizes disturbances of the displacement ﬁeld stipulated by the presence of the cuts. Assuming that the following relations hold (0) u∗3 = Re U3∗ e−iωt , U3 = U3 + U3∗ , Φ = Re F e−iωt , α1 = −γ cos β,

(0)

U3

= τ ei(α1 x1 +α2 x2 ) ,

α2 = −γ sin β,

γ=

(4.30)

ω , c∗

(β is the angle between the normal to the front wave and axis Ox1 ) we can write (4.26) and (4.28) using the amplitudes, as follows ∇2 U3 + γ 2 U3 = 0,

∇2 F = 0.

(4.31)

The connection between functions F, U3 and the potential amplitude of electric ﬁeld φ∗ are ascertained below. In the same way, (4.3), (4.24) may be represented by the edge conditions on the boundaries Lj in the following form ± iψ ∂U3 ± ∂U3 E 2 c44 1 + k15 e + e−iψ − (4.32) ∂ζ ∂ζ − ie15

eiψ

∂F ∂ζ

±

− e−iψ

∂F ∂ζ

±

= X3± ,

e15 iψ ∂U3 −iψ ∂U3 iψ ∂F −iψ ∂F + e = 0, e + e + e ε11 ∂ζ ∂ζ ∂ζ ∂ζ iψ ∂F −iψ ∂F e −e = 0, ∂ζ ∂ζ i

ζ = ξ1 + iξ2 ,

ζ = ξ1 − iξ2 ,

[η] = η + − η − ,

ζ ∈ Lj .

Here the upper sign refers to left boundary Lj (j = 1, 2, . . . , k), if its motion occurs from its beginning aj to the end bj ; ψ is the angle between the normal to the left boundary and Ox1 - axis Thus, the stated boundary problem is reduced to the deﬁnition of functions U3 and F from (4.31) and boundary conditions (4.32). The integral equations

4.2 A Piezoceramic Space

141

for the problem under study are obtained by using general representations of the functions U3∗ and F . It is easy to obtain such representations for the derivatives from displacement amplitude U3∗ if in formulas (4.8) we assume E that c45 = 0, c55 = cE 44 , c44 = c44 (μ = i). We have

∂U3∗ γ 2 −iψ iψ ∂E = cE + e Eq (ζ) ds, (4.33) ip (ζ) e 44 ∂z ∂ζ 2 L

∂U3∗ γ 2 iψ E −iψ ∂E = c44 + e Eq (ζ) ds, −ip1 (ζ) e ∂z 2 ∂ζ L ∗ ∗ ∂U3 ∂U3 p (ζ) = −2i , q (ζ) = [U3∗ ] , , p1 (ζ) = 2i ∂ζ ∂ζ i (1) E = E (ξ1 − x1 , ξ2 − x2 ) = − E H0 (γr) , r = |ζ − z| , 4c44 z = x1 + ix2 ,

ζ = ξ1 + iξ2 ∈ Lj

(j = 1, 2, . . . , k) ,

where the derivatives of the sought-for function are determined in an internal point of the area (x1 , x2 ). Formulas (4.33) match the integral representation for the displacement amplitude

iψ ∂E −iψ ∂E + e − q (ζ) e U3∗ (x1 , x2 ) = cE 44 ∂ζ ∂ζ L i iψ −iψ ds. (4.34) − E p (ζ) e − p1 (ζ) e 2 The equality (4.34) follows from (4.9) in the same way. The composite harmonic function F may be represented in the following way

! " 1 f (ζ) n (ζ − z) dζ − f1 (ζ)n ζ − z dζ . (4.35) F (x1 , x2 ) = 2πi L

The physical meaning of the functions f and f1 will be clear below. Diﬀerentiating (4.35) and applying the Sohotsky-Plemmely formulas of (4.12) at z → ζ0 ∈ L, we ﬁnd

∂F ∂z ∂F ∂z

± =∓ ± =∓

1 f (ζ0 ) − 2 2πi

L

1 f1 (ζ0 ) + 2 2πi

L

f (ζ) dζ , ζ − ζ0 f1 (ζ)dζ . ζ − ζ0

(4.36)

142

4 Diﬀraction of a Shear Wave

Substituting the limiting values of the functions (4.33) at z → ζ0 ∈ L in the boundary conditions (4.32) allowing for formulas (4.36), we obtain ∗ ∗ −iψ dU3 iψ dU3 p (ζ) = −e , p1 (ζ) = −e , (4.37) ds ds e15 e15 f (ζ) = − ε p (ζ) , f1 (ζ) = − ε p1 (ζ) . 2 11 2 11 Actually, formulas (4.37) provide the continuation of the corresponding electromagnetic quantities through cuts and the vector of shear stress. In reality the continuation of quantity Es , Dn , σn follows from the above-given constructions. To prove the continuation of the component of magnetic stress H3 let us use the formulas (4.25) and (4.35). We have $ # H3 = −iω ε11 Re F (x1 , x2 ) e−iωt . The jump F (x1 , x2 ) on L due to (4.35) reads

ζ0

ζ0 f (ζ)dζ +

[F (ζ0 )] = a

f1 (ζ)dζ. a

Taking into account relation (4.37) we have [F (ζ0 )] = 0, which proves the continuation of H3 . Thus, as it is seen from (4.37), all “densities” appearing in the integral representations (4.33)–(4.35) are expressed by a jump of the derivative [dU3∗ /ds]. In that way the above representations acquire physical meaning. The mechanical condition in (4.32) allowing for (4.37) induces the following singular integro-diﬀerentiated equation

∂U3∗ g (ζ, ζ0 ) ds + [U3∗ ]G (ζ, ζ0 ) ds = N (ζ0 ) , ds L

L

e 1 γ 2 Im + H1 (γr0 ) sin (α0 − ψ0 ) , 1 + k15 πi ζ − ζ0 2 (1) γ2 2 G (ζ, ζ0 ) = (4.38) H0 (γr0 ) cos (ψ − ψ0 ) , 1 + k15 2 i(α1 ξ10 +α2 ξ20 ) 2i 2 N (ζ0 ) = E X3 (ζ0 ) − 2γτ 1 + k15 e cos (ψ0 − β) , c44 2i (1) H1 (γr) = + H1 (γr) , r0 = |ζ − ζ0 | , α0 = arg (ζ − ζ0 ) , πγr

s ∗ dU3 ∗ ψ0 = ψ (ζ0 ) , [U3 ] = ds, ζ0 = ξ10 + iξ20 ∈ Lj (j = 1, 2, . . . , k) . ds g (ζ, ζ0 ) = −

iψ0

0

Here the kernel g (ζ, ζ0 ) is singular (Cauchy type), and the kernel G (ζ, ζ0 ) has a logarithmic singularity at the point ζ = ζ0 .

4.2 A Piezoceramic Space

143

For the unique solution of (4.38) in the class function with derivatives not limited in the vicinity of crack tips Lj , it is necessary to add the conditions of the following type:

∗ dU3 ds = 0 (j = 1, 2, . . . , k) . (4.39) ds Lj

Reasoning in the same way as in Sect. 4.1 we ﬁnd that the asymptotic of the shear stresses on the continuation over the crack tips and stress intensity factor is given by −iωt E iψ(±1) Re Ω0 (±1) e , (4.40) σ13 + iσ23 = ±c44 e 2 2r∗ s (±1) % √ π cE ± 44 ∗ KIII = im Re Ω0 (±1) e−iωt , 2πr σn = ± r ∗ →0 2 s (±1) ∗ dU3 ds Ω0 (δ) √ > 0, Ω0 (δ) ∈ H [−1, 1] . , s (δ) = = 2 ds dδ s (δ) 1 − δ The asymptotic of a normal compound of electric induction vector on the continuation over the crack tip reads Re Ω0 (±1) e−iωt . (4.41) Dn = D1 cos ψ (±1) + D2 sin ψ (±1) = ±e15 2 2r∗ s (±1) The other electromagnetic quantities are limited. In reality, from the equations of state (4.22) we have σn = cE 44

∂u3 − e15 En , ∂n

Dn = e15

∂u3 + ε11 En , ∂n

(4.42)

Where Dn is the normal component of electric induction on arc L which is vey close to L. As [σn ] = [Dn ] = 0 and the determinant of system (4.42) diﬀers → − from zero, we ﬁnd [∂u3 /∂n] = [En ] = 0. Thus, the electric ﬁeld E continues through the cut and that implies that it is continuous everywhere. After the solution of integral (4.38) functions F, U3∗ and ∂i U3∗ (i = 1, 2) are restored by formulas (4.33)–(4.35). Then we can calculate the tangential stress, the strength and induction of the electric ﬁeld in any point of the area by using relations (4.25), (4.29). The amplitude of the electric potential φ∗ may be calculated as follows Condition of Cauchy-Riemann [103]: e15 e15 ∂1 φ∗ − ε U3 = −∂2 F, ∂2 φ∗ − ε U3 = ∂1 F. 11 11

144

4 Diﬀraction of a Shear Wave

Consequently, based on (4.35), (4.37) we get: ⎧ ⎫

∗ ⎬ ∂U3 e15 ⎨ 1 φ∗ (x1 , x2 ) = ε U3 (x1 , x2 ) + arg (ζ − z) ds . ⎭ 11 ⎩ 2π ds

(4.43)

L

Due to condition (4.39) the integral appearing here is the unique function of the complex variable z, and the displacement amplitude U3 (x1 , x2 ) and is calculated by using (4.34). As an example consider the space of piezoceramics PZT–4 (See: Appendix A, Table A.1), containing a crack of parabolic or sinusoidal form. + >= Table 4.2 gives KIII the values of relative stress intensity factor < E 2 c44 |Ω0 (1)|/(2Λ s (1)) for a parabolic crack (ξ1 = δ, ξ2 = p∗ δ ) under the action of shear wave (β = π/2) in piezoceramic and in corresponding piezopasthe of sive media (e15 = 0). It is obvious √ inﬂuence of the interaction that + + 0 cos (ωt − arg Ω the coupled ﬁelds on K = πΛ K (1)) (Λ = S 0 23 = III III 2 1 + k is the modulus of stress amplitude σ in a shear wave) in γ |τ | cE 23 44 15 the space is not of great importance. + > as a Figures 4.5 and 4.6 illustrate the behaviors of quantity < KIII ∗ 2 function of the normalized wave number γ = γ 1 + k15 under the inﬂuence of harmonic forces (Λ = |X3 | = const.) and shear wave (β = π/2), in a space with a crack of sinusoidal form respectively. The number of the curve conforms ν in parametric conditions L:ξ1 = (1 + δ)/2, ξ2 = 0, 2 sin νπξ1 (δ ∈ [−1, 1]). The solid and dashed lines correspond to α and b, respectively.

Table 4.2. ∗

γ 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

∗

p = 0.5 PZT-4

e15 = 0

0.857 0.864 0.884 0.912 0.950 0.996 1.050 1.112 1.177 1.240 1.289

0.857 0.864 0.881 0.906 0.937 0.973 1.014 1.056 1.097 1.131 1.150

p∗ = −0.5 PZT-4 e15 = 0 0.857 0.865 0.884 0.913 0.953 1.002 1.061 1.130 1.207 1.285 1.354

0.857 0.864 0.882 0.907 0.941 0.981 1.028 1.081 1.136 1.189 1.232

4.2 A Piezoceramic Space

145

± < KIII >

1.80

1.35

2 3

4

5

1 0.90

0.45 γ* l

0.00 0.00

1.25

2.50

3.75

5.00

± KIII

Fig. 4.5. Behaviour of < > as a function of normalized wave number γ ∗ l for various forms of a sinusoidal crack under the inﬂuence of shear forces

Figure 4.7 shows the contour lines of the modulus of displacement amplitude U3 (x1 , x2 ) in the vicinity of a linear crack with the length of 2 loaded with shear forces (X3 = const.) (γ ∗ = 2). Fig. 4.8 illustrates analogous results for the moduli of amplitude of electric potential φ∗ (x1 , x2 ), obtained by using formulas (4.43) (γ ∗ = 0.5). The lighter zones correspond to maximal values.

1.5

± >
1.2

1 2 2

0.9

3 4 5

0.6

4

0.3 γ* l

0.0 0

1

2

3

4

5

± Fig. 4.6. Behaviour of < KIII > as a function of normalized wave number γ ∗ l for various sinusoidal cracks under the inﬂuence of a shear wave

146

4 Diﬀraction of a Shear Wave

Fig. 4.7. The contour lines of the modulus of displacement amplitude |U3 | in a space with a linear crack

Fig. 4.8. The contour lines of the modulus of the electric potential amplitude in a space with a linear crack

4.3 A Piezoceramic Halfspace. Free Boundary and Rigid Fixture Problems

147

4.3 A Piezoceramic Halfspace. Free Boundary and Rigid Fixture Problems We have already considered the interaction of shear waves with curvilinear cracks-cuts in inﬁnite media. In order to take into account the inﬂuence of the boundary let us study the analogous problem on a piezoceramic halfspace. To construct the integral representations of the solutions we use Green’s function in a halfspace. Consider the piezoceramic halfspace x2 ≥ 0, weakened by tunnel cuts, along x3 -axis, that are curvilinear and noted as Lj (j = 1, 2, . . . , k). On the x3 , continuous by boundaries Lj let us assign independent on coordinates + − H¨older shear loadings X3n = X3n = −X3n == Re X3 e−iωt . The presence of radiation from inﬁnity in the form of a plane monochromic shear wave (see Fig. 4.9) is not excluded. Let us suppose that on the boundary of the half-space the following two types of edge conditions are possible: a) a halfspace is rigidly ﬁxed and covered along the boundary by a grounded electrode (4.44) u3 = 0, E1 = 0 (x2 = 0) ; b) a halfspace free from forces and bounded with vacuum σ23 = 0,

D2 = 0

(x2 = 0) .

(4.45)

Under the given conditions in a halfspace, stationary waves appeared described by quantities (m = 1, 2) σm3 = Re{Sm3 (x1 , x2 )e−iwt },

Em = Re{Em∗ (x1 , x2 )e−iwt },

Dm = Re{Dm∗ (x1 , x2 )e−iwt },

H3 = Re{H3∗ (x1 , x2 )e−iwt }.

The full system of equations of the stated boundary problem has the form of (4.1), (4.22), (4.23) and (4.32). Here we must also augment the above system with the mechanical and electric conditions on the boundary of a halfspace.

β bj Lj

n

x2 aj O

ψ b1 +– L1 a1 x1

Fig. 4.9. The scheme of a halfspace with a crack

148

4 Diﬀraction of a Shear Wave

Proceeding in the same way as we did in Sect. 4.2 we come to the following diﬀerential equations corresponding to the displacement amplitude U3 and the function F introduced into (4.25) ∇2 U3 + γ 2 U3 = 0,

∇2 F = 0.

(4.46)

Thus, the problem is reduced to the deﬁnition of functions U3 and F from (4.46), of boundary conditions (4.32) on the cuts and also on mechanical and electric conditions on the boundary of a halfspace. Having constructed the subsidiary function of Green’s (4.46) for a half-space it is better to fulﬁll the latter. Applying the method of images we ﬁnd (1)

(1)

G (z0 , z) = H0 (γr) − AH0 (γr1 ) , H (z0 , z) = n (z0 − z) + An (z0 − z) , z = x1 + ix2 ,

z0 = x10 + ix20 ,

r = |z − z0 | ,

(4.47) r1 = |z − z0 | .

oltz equation and Here the function G (z0 , z) is in conformity with Helmh¨ H (z0 , z) with Laplace equation. The value A = −1 corresponds to a free from force halfspace bounded with vacuum; A = 1 corresponds to a ﬁxed and covered with grounded electrodes halfspace. The wave displacement ﬁeld in a halfspace with defects is combined from a direct, a reﬂected -from the boundary of a halfspace- wave and of a ﬁeld of dispersed defects. According to this, the sought-for function is constructed in the following form [181]

i ∂G (ζ, z) (0) (1) [U3 ] ds + U3 − AU3 , U3 (x1 , x2 ) = − 4 ∂nζ L

! " 1 f (ζ) H (ζ, z) dζ − f1 (ζ)H (ζ, z)dζ , F (x1 , x2 ) = (4.48) 2πi L

(1) U3 (0)

= τe (1)

i(α1 x1 −α2 x2 )

,

ζ = ξ1 + iξ2 ∈ L,

where U3 , U3 denote the displacement amplitudes in falling and reﬂected from the boundary of a halfspace waves, respectively [U3 ] , f and f1 are soughtfor “densities”; function G and H are deﬁned in (4.47); diﬀerential operator ∂/∂nζ deﬁnes the derivative by the normal to contour L, ds is the element of the arc length L. The integral representations (4.48) conform to (4.46), mechanical and electric boundary conditions of the mentioned type on the boundary of halfspace x2 = 0 and also the conditions of radiation, respectively. At A = 0 we obtain the representations of the solutions for an unlimited piezoceramic condition with cracks.

4.3 A Piezoceramic Halfspace. Free Boundary and Rigid Fixture Problems

149

The procedure of reducing the considered boundary problem to the integral is as follows. Using formulas (4.25), (4.29) and (4.48) we obtain integral representations of electric and mechanical quantities. Substituting the corresponding limiting values of these quantities at z → ζ0 ∈ L in boundary conditions (4.32) we come to the dependence (4.37) between functions f, f1 and [dU3 /ds] and the singular integro-diﬀerential equation:

p (ζ)g1 (ζ, ζ0 ) ds +

L

p (ζ)g2 (ζ, ζ0 ) ds = N (ζ0 ) ,

(4.49)

L

eiψ0 e−iψ0 2 , + Ak15 Im ζ − ζ0 ζ − ζ 0 [6pt] πiγ 2 (1) 2 g2 (ζ, ζ0 ) = 1 + k15 AH0 (γr10 ) cos (ψ + ψ0 ) 4 g1 (ζ, ζ0 ) = Im

(1)

−H0 (γr0 ) cos (ψ − ψ0 ) +

(1) + H2 (γr0 ) cos (ψ + ψ0 − 2α0 ) −AH2 (γr10 ) cos (ψ − ψ0 + 2α10 ) , N (ζ0 ) =

i(α1 ξ10 +α2 ξ20 ) π 2 e X (ζ ) + πiτ γ 1 + k cos (ψ0 − β) − 3 0 15 cE 44 − A ei(α1 ξ10 −α2 ξ20 ) cos (ψ0 + β) ,

H2 (γr) =

4i (1) + H2 (γr) , πγ 2 r2

α0 = arg (ζ0 − ζ) , ψ = ψ (ζ) ,

) ) r10 = )ζ − ζ0 ) ,

α10 = arg ζ0 − ζ ,

ψ0 = ψ (ζ0 ) ,

ζ0 = ξ10 + iξ20 ;

r0 = |ζ − ζ0 | ,

p (ζ) =

[U3 ] , 2

p (ζ) =

dp (ζ) , ds

ζ, ζ0 ∈ L = ∪Lj .

Here, the case A = −1 corresponds to a free from forces halfspace bounded with vacuum; A = 1 corresponds to a halfspace covered with grounded electrodes. At A = 0 we obtain the integral equation corresponding to unlimited space with cracks. It is necessary to add the additional condition of the following type to the integral (4.49)

p (ζ)ds = 0

Lj

(j = 1, 2, . . . , k) .

(4.50)

150

4 Diﬀraction of a Shear Wave

The expression for the stress intensity factor KIII may be obtained by asymptotic analysis of stresses in the vicinity of the crack tip. Using representations (4.48) we ﬁnd % # $ π ± Re Ω0 (±1) e−iωt , KIII (4.51) = ±cE 44 s (±1) p (ζ) =

s

Ω0 (δ) √ , (δ) 1 − δ 2

Ω0 (δ) ∈ H [−1, 1] .

The numerical solution of singular integro-diﬀerential (4.43) was carried out by the method of quadrature (see: Appendix 12.8, Par. B.1). Fig. 4.10 shows the contours of absolute values of the amplitude of electric potential φ∗ (x1 , x2 ) the area covering a linear crack for diﬀerent types of mechanical and electric edge conditions on the boundary of a halfspace with (A = 1, γ ∗ = 0.5), Fig. 4.11 with (A = −1, γ ∗ = 1) and Fig. 4.12 with (A = −1, γ ∗ = 0.5). As loading we consider shear forces acting on the crack boundary. Calculations were carried out by using the following formula: ⎧

e15 ⎨ 1 φ∗ (x1 , x2 ) = ε p (ζ) [arg (ζ − z) U3 (x1 , x2 ) + 11 ⎩ π L $ + A arg ζ − z , ζ ∈ L.

(4.52)

The lines of the modulus of displacement amplitude U3 (x1 , x2 ) for the same type of loading are given in Fig. 4.13 with (A = −1, γ ∗ = 1).

Fig. 4.10. The contour lines of the modulus of the displacement amplitude in the vicinity of a crack under various conditions on the boundary of a halfspace under the inﬂuence of shear forces

4.3 A Piezoceramic Halfspace. Free Boundary and Rigid Fixture Problems

151

Fig. 4.11. The contour lines of the modulus of the displacement amplitude in the vicinity of a crack under various conditions on the boundary of a halfspace under the inﬂuence of shear forces

To investigate the inﬂuence of the cut curve and the frequencies of the harmonic excitation on the behavior of the stress intensity factor we considered the diﬀraction of shear wave (β = π/2) in a halfspace from piezoceramics PZT-4 with a parabolic crack parameterization of type ξ1 + iξ2 = δ eiϕ (p1 + ip2 δ) + ih, δ ∈ [−1, 1] (ϕ is the angle characterizing the crack orientation in a halfspace).

Fig. 4.12. The contour lines of the modulus of the displacement amplitude in the vicinity of a crack under various conditions on the boundary of a halfspace under the inﬂuence of shear forces

152

4 Diﬀraction of a Shear Wave

Fig. 4.13. The contour lines of the modulus of the electric potential amplitude in a free halfspace which is bounded with vacuum and is under the inﬂuence of shear forces

Figures 4.14 and 4.15 illustrate the behavior of the relative quantities

* 0 + * + S23 s (1) and KIII |X3 | s (1) as KIII = cE = cE 44 |Ω0 (1)| 44 |Ω0 (1)|

a function of γ ∗ in the case of a free and conjugated with vacuum (A = −1), respectively. Curves 1, 2 and 3 are constructed for the values h/p1 = 2, ϕ = 0, p2 /p = 0, −0.6, −1.2, respectively. Analogous results for ﬁxed halfspace (A = 1) are shown in Fig. 4.16 (τ = const) and Fig. 4.17 (X3 = const) and curves 1–4 relate to values p2 /p = 0, −0.3, −0.6, −0.9 and h/p1 = 3, ϕ = 0. As it follows from Fig. 4.16,
+ > III

2.7

a 1

b

x2

3 x1

1.8

0.9 2 γ*| 0.0 0.00

1.25

2.50 ± KIII

3.75

5.00

Fig. 4.14. Changes of quantity < > as a function of γ ∗ l for a parabolic crack under the inﬂuence of a shear wave (A = −1)

4.3 A Piezoceramic Halfspace. Free Boundary and Rigid Fixture Problems

153

+ III

4

3 3 2 2 1

1 γ*| 0 0.00

1.25

2.50

3.75

5.00

± Fig. 4.15. Changes of quantity < KIII > as a function of γ ∗ l for a parabolic crack under the inﬂuence of shear forces (A = −1)

the quantity KIII may exceed its statistic analogue more than by 4–5 times. ± Figures 4.18–4.21 illustrate the changes of the quantity KIII with respect to the orientation angle ϕ of linear cracks (p2 = 0) in the ﬁxed and free halfspaces for both types of loading. In Fig. 4.18, Fig. 4.19 the lines with number m (X3 = 0) and Fig. 4.19 (τ = 0) correspond to the values of parameters A = 1, h/p1 = 3/2, γ ∗ = 5 + (m − 1) /4 and γ ∗ = 1 + (m − 1) /4, respectively; in Fig. 4.20 (X3 = 0), Fig. 4.21 (τ = 0) shows the results for +

6.4

4.8

3.2

1.6

1 2 3

0.0 0.00

γ*|

4

0.75

1.50 ± KIII

2.25

3.00

Fig. 4.16. Changes of quantity < > as a function of γ ∗ l for a parabolic crack under the inﬂuence of a shear wave (A = 1)

154

4 Diﬀraction of a Shear Wave +

11.0

8.3

5.5 4 3

2.8

2 1

0.0 0.00

0.75

γ *| 1.50

2.25

3.00

± KIII

Fig. 4.17. Changes of quantity < > as a function of γ ∗ l for a parabolic crack under the inﬂuence of shear forces (A = −1)

A = −1, h/p1 = 4, γ ∗ = 0.8 + (m − 1) /5. In the case of a linear crack (ϕ = 0) the propagation angle of wave β = 0 in the free halfspace of factor KIII is equal to zero. ± Assuming that the quantity KIII is known, the intensity factor may be √ ± ± cos (ωt − arg Ω0 (±1)), where Λ = |X3 | in = ± πΛ KIII deﬁned by KIII 0 case τ = 0, X3 = 0 and Λ = S23 , if τ = 0, X3 = 0. From the results it follows that in a halfspace with defect of the prescribed conﬁguration, a series of values of a wave number exist where the factor KIII ±

< K III >

0.7

1 2

3

0.4

4 5

ϕ 0.1

0

π/4

π/2

± Fig. 4.18. Changes of quantity < KIII > as a function of the orientation angle ϕ with a linear crack (X3 = 0, A = 1)

4.3 A Piezoceramic Halfspace. Free Boundary and Rigid Fixture Problems

155

±

2.4

4 1

1.2 5

2 3 ϕ 0.0

π/4

0

π/2

± Fig. 4.19. Changes of quantity < KIII > as a function of the orientation angle ϕ with a linear crack (τ = 0, A = 1)

is close to zero. Similarly, we may note a series of values of a wave number, at which the curve of quantity KIII has local maximums. The constructed algorithm corresponds to the situation where the cracks do not cross the boundary of the halfspace. ±

1.90 3

3 4

4 2 2

1.25

1 1 5 ϕ

5

0.60

0

π/4

π/2

± Fig. 4.20. Changes of quantity < KIII > as a function of the orientation angle ϕ with a linear crack (X3 = 0, A = −1)

156

4 Diﬀraction of a Shear Wave ±

< KIII >

2.6

4

4

1 1 5

1.3

5

3

2 3 2 ϕ

0.0

π/4

0

π/2

± Fig. 4.21. Changes of quantity < KIII > as a function of the orientation angle ϕ with a linear crack (τ = 0, A = −1)

4.4 A Halfspace with a Crack Reaching the Boundary Let the beginning of cut ζ = a lie on the boundary of halfspace x2 = 0. In that case it is obvious that the representations (4.48) hold. Therefore, diﬀerentiating them with subsequent integration by parts of the main singular terms we obtain

1 A dp (ζ) dp (ζ) ∂U3 = + + ∂z 2πi ζ −z 2πi ζ−z L L

1 A p(a) ∂ (0) (1) + p (ζ) K1 (ζ, z)ds + , + U3 − AU3 + 2πi a − z a − z ∂z L

∂U3 1 dp (ζ) dp (ζ) A =− − − ∂z 2πi 2πi ζ −z ζ −z L L

1 A p(a) ∂ (0) (1) − p (ζ) K2 (ζ, z)ds − , + U3 − AU3 + 2πi a − z a − z ∂z L

∂F 1 =− ∂z 2πi ∂F 1 = ∂z 2πi

L

L

A f (ζ) dζ + ζ −z 2πi

A f1 (ζ)dζ − 2πi ζ−z

L

L

f1 (ζ)dζ , ζ −z f (ζ) dζ , ζ −z (4.53)

4.4 A Halfspace with a Crack Reaching the Boundary

157

iγ 2 iψ (1) AH0 (γr1∗ ) + H2 (γr) e−2iα − e 8 ∗ iγ 2 −iψ (1) − H0 (γr) + AH2 (γr1∗ ) e−2iα1 , e 8 ∗ iγ 2 iψ (1) K2 (ζ, z) = AH2 (γr1∗ ) e2iα1 + H0 (γr) − e 8 iγ 2 −iψ (1) AH0 (γr1∗ ) + H2 (γr) e2iα , e − 8 ) ) α = arg (z − ζ) , α∗1 = arg z − ζ , r = |z − ζ| , r1∗ = )z − ζ ) .

K1 (ζ, z) =

Substituting the limited values of the derivatives (4.53) in the boundary condition (4.32) on L, after some transformations we get a singular integrodiﬀerential equation for the function p (ζ) of the type (4.49), where instead of (1) H2 (γr10 ) we have H2 (γr10 ) and g(ζ, ζ0 ) = Im

eiψ0 eiψ0 + AIm ζ − ζ0 ζ − ζ0

(4.54)

For the derivation of the above equation it was taken into account that for a ﬁxed halfspace is p (a) = 0, and under this assumption the non-integral terms are vanished. In the case of a free halfspace these terms also vanish. In (4.54) the ﬁrst component has mobile singularity of Cauchy type, and in the second-immobile singularity at point ζ = ζ0 = a. The theory of singular integral equations with mobile singularity is developed in [66]. The function p (ζ) in the vicinity of tip b exhibits power singularity (the order of singularity σ = 1/2). In the vicinity of tip a let us present this function in the form (ϕ ∈ H on arc [a, b)) p (ζ) =

ϕ (ζ) dp = , ds (ζ − a)σ

Imσ = 0,

0 ≤ σ ≤ 1.

(4.55)

Applying the formulas for asymptotic values of the integral of Cauchy type on the line of integrating [50] we ﬁnd

eiψ0 πϕ (a) p (ζ)Im dζ = ϕ1 (ζ0 ) − (4.56) σ ctg πσ, ζ − ζ0 (ζ0 − a) L

eiψ0 πϕ (a) cos [2 (σ − 1) ψ (a)] . p (ζ)Im dζ = ϕ2 (ζ0 ) + σ (ζ0 − a) sin πσ ζ − ζ0 L

where ψ (a) is the value of ψ (ζ) at point ζ = a; the functions ϕi (ζ) may −σ exhibit singularity at point ζ = a, but more weak than (ζ − a) . Substituting (4.56) into (4.49) considering (4.54), multiplying the left and right part of σ the obtained equation with (ζ0 − a) and satisfying the limiting transition at ζ0 → a, we obtain A cos [2 (σ − 1) ψ (a)] − cos πσ = 0.

(4.57)

158

4 Diﬀraction of a Shear Wave

The analysis of solution of this equation for case A = 1 gives ψ (a) [ψ (a) + π/2]−1 , 0 ≤ ψ (a) < π/2, σ= −1 ψ (a) [ψ (a) − π/2] , −π/2 < ψ (a) ≤ 0.

(4.58)

At A = −1 there are no solutions of transcendental (4.57) satisfying condition 0 < σ < 1. Hence, in the case of an isotropic halfspace with a crack reaching the boundary [175], the stress in the free from forces piezoceramic halfspace are limited in the vicinity of reaching the tip boundary; in the case of a ﬁxed halfspace a power singularity of order σ exists, determined by formula (4.58).

4.5 Harmonic Excitation of a Halfspace by External Sources In real systems (electroacoustic transducer) the sources of oscillations in many cases may be considered linear. If a linear source is located along the symmetry axis of a piezoelectric medium with hexagonal symmetry, in its interior connected electric and acoustic oscillations corresponding to the antiplane deformation will be excited. The initial system of equations for the displacement amplitude and electric potential has the following form [52] 2 2 2 cE 44 ∇ U3 + e15 ∇ φ∗ + ρω U3 = −P0 δ (x1 − x10 , x2 − x20 ) ,

e∇2 15 U3 −

ε11

(4.59)

2

∇ φ∗ = Q0 δ (x1 − x10 , x2 − x20 ) .

Here P0 and Q0 are the linear densities of the concentrated forces and charges acting at the point z0 = x10 +ix20 of the medium; δ (x, y) = δ (x) δ (y) is the Dirac delta function. The solution of (4.59) is found simply by 2 k15 P0 Q0 (1) (4.60) U3 (x1 , x2 ) = H0 (γr) , 2 ) − 2 ) 4ie15 (1 + k15 4icE (1 + k 44 15 e15 P0 Q0 i (1) 2 nr + − k15 Q0 H0 (γr) , φ∗ (x1 , x2 ) = − 2 ) ε E 2π ε11 4 (1 + k15 c 11 44 r = |z − z0 | ,

z = x1 + ix2 .

In the case where the source is concentrated on the line x1 = x10 , x2 = 0, −∞ < x3 < ∞ on the boundary of a free halfspace, the solution may be found with the help of the method of images. If we assume that the external medium is vacuum, we get equations of type (4.60), where r is substituted by r∗ = |z − x10 | and also the amplitudes P0 and Q0 are doubled. To investigate the inﬂuence of external sources on stress intensity factor KIII in a halfspace with cracks we will calculate the corresponding right part of integral (4.49). Considering combination σn = σ13 cos ψ + σ23 sin ψ in

4.5 Harmonic Excitation of a Halfspace by External Sources

159

+

0.8

< KIII >

0.6

0.4 1 0.2

2 γ*l

0.0 0.0

1.5

3.0

4.5

6.0

± Fig. 4.22. Changes of quantity < KIII > as a function of γ ∗ l in a space with a parabolic crack under the inﬂuence of concentrated electric charges

the edge condition (4.3) allowing for constitutive relation (4.22) and formula (4.60) we ﬁnd [180] 2 πiγP0 (1) Q0 πk15 2 (1) ∗ ∗ N (ζ0 ) = H1 (γr0 ) + iγH1 (γr0 ) − ∗ cos (ψ0 − α∗0 ) , 2e15 πr0 2cE 44 r0∗ = |ζ0 − x10 | , α∗0 = arg (ζ0 − x10 ) , ψ0 = ψ (ζ0 ) . (4.61) Thus, the algorithm for solving the problem is reduced to the deﬁnition of the function p (ζ) from integral (4.49) where the right part is given by +

1.00

0.75

0.50 2 1 0.25 γ*| 0.00 0.0

1.5

3.0 ± KIII

4.5

6.0

Fig. 4.23. Changes of quantity < > as a function of γ ∗ l in a space with a parabolic crack under the inﬂuence of concentrated shear forces

160

4 Diﬀraction of a Shear Wave ±

1.32

b ϕ

0.99 a 0.66

54

0.33

3 5 43 0.00

0

1

2

21 2

γ *l

3

4

± Fig. 4.24. Behavior of < KIII > as a function of γ ∗ l for various orientation angles of crack in a halfspace, (Q0 = 0)

(4.61). The stress intensity factor KIII is found by the formula (4.51). If it is necessary to calculate the values of ﬁeld quantities of internal area we should use integral representations (4.48) and formulas (4.25), (4.29). As an example let us investigate the situation where the piezoceramic halfspace from ceramics PZT-4 is weakened by a parabolic crack (ξ1 = p1 δ, ξ2 = p2 δ 2 + h, −1 ≤ δ ≤ 1 . Figs. 4.22 and4.23 illustrate changes of the √ √ + * + quantity KIII = e15 |Ω0 (1)| = cE |Q0 | s (1) and KIII 44 |Ω0 (1)| ±

1.15

0.92

0.69

0.46 5 4

0.23

5 4 3 2 1

3 2

γ*l

0.00 0

1 ± KIII

2

3

4 ∗

Fig. 4.25. Behaviour of < > as a function of γ l for various orientation angles of a crack in a halfspace (P0 = 0)

4.5 Harmonic Excitation of a Halfspace by External Sources

161

±

0.24

4 3 2

0.18 4 1

0.12

3 2

0.06 1 x10

0.00 –6

–3

0

3

6

± KIII

Fig. 4.26. Changes of quantity < > according to the coordinates of application of electric charges on the boundary of a halfspace for various values of γ ∗ l

* |P0 | s (1) , respectively, with respect to the normalized wave number 2 in the case where on the boundary of halfspace (x γ ∗ = γ 1 + k15 10 = 0) a linear source of electric charge (Q0 = const, P0 = 0) type and shear force (P0 = const, Q0 = 0) occur. Curves 1, 2 are constructed for the parameter values h/p1 = 2, p∗ /p = 0, −0.6. Figures 4.24 and Fig. 4.25 For a parabolic crack orientated at angle ϕ to axis x1 , the behavior of KIII is shown in Figs. 4.24 (Q0 = 0) and 4.25 (P0 = 0). The line with number m corresponds to the parameters h/p1 = ±

0.24

4 3 2

0.18

4

1

3 0.12 2 0.06 1 x10

0.00 –6

–3

0

3

6

± Fig. 4.27. Changes of quantity < KIII > according to the coordinates of application of shear forces on the boundary of a halfspace for various values of γ ∗ l

162

4 Diﬀraction of a Shear Wave

1.5, p2 /p1 = −0.5, ϕ = 0.05π (m − 1). The graphs characterizing the changes ± as a function of the coordinate of application of the current source of KIII of a charge type and shear force are represented in Figs. 4.26 and 4.27, respectively. Curves 1–4 correspond to parameters p∗ /p = 0, h/p = 3 and γ ∗ = 2, 2.3, 2.6, 2.9. In Figs. 4.24–4.27 The solid and dashed lines are constructed for crack tips a and b, respectively. The stress intensity factor KIII for both types of loading is determined by %

± KIII ± KIII

± π cE 44 cos [ωt − arg (Ω0 (±1))] , |Q0 | KIII e15 % ± π |P0 | KIII cos [ωt − arg (Ω0 (±1))] . =± =±

The results shown in Figs. 4.22 and 4.23 conﬁrm the conclusion that the crack curve in dynamic priblems may inﬂuence the behavior of the stress intensity factor.

4.6 Arbitrary with Time Excitation of a Halfspace The analysis of electroacoustic ﬁelds in piezoelectric bodies with cracks under the action of dynamic loading changing with time arbitrarily are of great interest as it helps to realize deeply the processes preceding the brittle fracture. As in the case of harmonic eﬀects, the problems of shock loading of bodies with cracks due to complexity of the appearing problems are solved analytically only in case of some idealized statements. These problems also include problems for inﬁnite areas. The stress intensity factor in the case of a crack with a ﬁnite length loaded by a shock impulse of longitudinal shear is determined in [235]. Below we investigate the behavior of the stress intensity factor KIII under the dynamic inﬂuence on a piezoceramic halfspace containing a stationary crack of an inﬁnite length [183]. Let on the line x1 = x10 , x2 = 0, −∞ < x3 < ∞ of a boundary free from a bounded with vacuum halfspace to act shear forces P (x1 , t) = P0 (t) δ (x1 − x10 ), or electric charges Q (x1 , t) = Q0 (t) δ (x1 − x10 ) arbitrarily changing with time. In this case the solution i is the superposition of “elementary” solutions along the whole spectrum of frequencies. Applying Fourier’s integral transform [165] +3 (x1 , x2 , ω) , φˆ (x1 , x2 , ω)} = √1 {U 2π % {u3 (x1 , x2 , t) , φ (x1 , x2 , t)} =

∞

{u3 (x1 , x2 , t) , φ (x1 , x2 , t)}eiωt dt,

0

(4.62) 2 Re π

∞ 0

! +3 (x1 , x2 , ω) , φˆ (x1 , x2 , ω)}e−iωt dω, U

4.6 Arbitrary with Time Excitation of a Halfspace

163

we ﬁrst consider the situation where on the boundary of a homogeneous piezoelectric halfspace (without defects) at point x1 = x10 acts a linear source. By considering the same assumptions of Sect. 4.5 we ﬁnd that the corresponding displacement transformants and electric potentials are given by , . 2 P-0 (ω) Q0 (ω) k15 (1) + 0 (4.63) U3 (x1 , x2 , ω) = H0 (γr∗ ) , 2 ) − 2 2ie15 (1 + k15 2icE 44 (1 + k15 ) +0 (x1 , x2 , ω) = − Q0 (ω) nr∗ + φ ε π11 / 0 e15 P-0 (ω) i (1) 2 + ε − k15 Q0 (ω) H0 (γr∗ ) , 2 ) 211 (1 + k15 cE 44 r∗ = |z − x10 | ,

z = x1 + ix2 .

In the case of a halfspace with cracks where a source on its boundary acts we obtain a integro-diﬀerential equation of type (4.49), the right part of which has the following form / 0 2 +0 (ω) (1) Q0 (ω) πiγ P πk15 2 (1) ∗ ∗ N (ζ0 , ω) = H1 (γr0 ) + iγH1 (γr0 ) − ∗ 2e15 πr0 2cE 44 cos (ψ0 − α∗0 ) , r0∗ = |ζ0 − x10 | ,

(4.64)

α∗0 = arg (ζ0 − x10 ) .

In order to calculate the stress intensity factor KIII we derive the main asymptotic of shear stress transformant on the continuation across the crack ˆ3∗ (x1 , x2 , ω) corretip. iIt must be taken into account that for the function U sponding to the defect dispersed shear ﬁeld, the representation (4.48) (when non-integral compounds are lacking) is valid at A = −1. Due to (4.22) we have (leaving the compounds causing asymptotic) 0 / -3∗ -3∗ -3∗ ∂ U ∂ U ∂ U iψc + . . . = cE + e−iψc + ..., (4.65) σ -n = cE 44 44 e ∂n ∂z ∂z where c is the cut tip, ψc = ψ (c). Allowing for expressions (4.53) let us write out the main part of function (4.65)

cE eiψc ds. (4.66) σ -n0 = 44 p (ζ) Im π ζ −z L

164

4 Diﬀraction of a Shear Wave

Applying the asymptotic formulas for the integrals and contour parameterization L (ζ = ζ (δ)) appearing in (4.66) we ﬁnd Ω0 (±1, ω) Ω0 (δ, ω) √ , p (ζ) = σ -n0 = ±cE , 44 s (δ) 1 − δ 2 2rs (±1) ) ds )) s (±1) = (−1 ≤ δ ≤ 1) . dδ )δ=±1

(4.67)

where r = |z − c|, the lower sign corresponds to the tip c = a, and the upper one to c = b. Let us introduce the “standard” solution Ω1 and Ω2 of the integral (4.49) with the right part (4.64) given by the formula Ω0 (δ, ω) =

ˆ 0 (ω) Pˆ0 (ω) Q Ω1 (δ, ω) + Ω2 (δ, ω) . E e15 c44

(4.68)

The functions Ωj (δ, ω) , (j = 1, 2) corresponds to the following right parts of the integral (4.49) πiγ (1) H1 (γr0∗ ) cos (ψ0 − α∗0 ) , 2 2 πk15 2 (1) ∗ N2 (ζ0 , ω) = iγH1 (γr0 ) − ∗ cos (ψ0 − α∗0 ) . 2 πr0

N1 (ζ0 , ω) =

According to (4.67), (4.68) we have √ - ± (ω) = im 2πrK σn0 = III r→0 / % + π cE 44 ˆ P0 (ω) Ω1 (±1, ω) Q0 (ω) Ω2 (±1, ω) . =± s (±1) e15

(4.69)

(4.70)

Using the initial notation from (4.62) we ﬁnd stress intensity factor ± KIII

(t) = ±

2 Re s (±1)

∞ Pˆ0 (ω) Ω1 (±1, ω) + 0

cE ˆ −iωt dω. + 44 Q 0 (ω) Ω2 (±1, ω) e e15

(4.71)

If in the integral (4.49) with the right part (4.64) we substitute ω by −ω, the solution of this new equation Ω∗0 (ω) = Ω0 (−ω) becomes equal to Ω0 (ω). This follows from the equation [57] Hν(1) eiπ z = −e−iπν Hν(2) (z) ,

(2)

Hν (z) = Hν(2) (z) ,

4.6 Arbitrary with Time Excitation of a Halfspace

165

σν

t

d1

d2 T

Fig. 4.28. The scheme of a trapezoidal impulse (1)

and also from the relation in (4.49) connecting H2 (γr) with H2 (γr). Based on the above the quantity KIII may be represented in the form

∞ 1 ± Pˆ0 (ω) Ω1 (±1, ω) + KIII (t) = ± (4.72) 2s (±1) −∞

+

cE 44

e15

ˆ 0 (ω) Ω2 (±1, ω) e−iωt dω. Q

Example. Let an electroelastic ﬁeld excited by an impulse loading of trapezoidal form in a halfspace (space) weakened by a single linear crack with parametric equations ξ1 = δ, ξ2 = h (−1 ≤ δ ≤ 1) (see Fig. 4.28). The corresponding spectral function of the given impulse has the form σν −1 iμ1 √ d1 e − 1 − μ2 eiωT − eiμ3 , ω 2 2π - 0 (ω) , μ1 = ωd1 , R1 (ω) = P-0 (ω) , R2 (ω) = Q

Rν (ω) =

−1

μ2 = (T − d1 − d2 )

,

μ3 = ω (d1 + d2 )

(4.73)

(ν = 1, 2) .

In case wheh d2 = 0 we deduce the spectral functions of loading given in the form of a triangle impulse. At this point it is helpful to introduce the dimensionless time parameters (c∗ are the velocity of a shear wave in a piezoelectric medium) t∗ = c∗ th−1 ,

d∗ν = c∗ dν h−1 ,

T ∗ = c∗ T h−1

(ν = 1, 2) .

Substituting (4.73) into (4.71) we obtain the formula for the stress intensity factor KIII (t). Appearing in it “standard” solutions were calculated from the system of (4.49), (4.50) using (4.69) by the scheme of the method of quadrature

166

4 Diﬀraction of a Shear Wave

(see: Appendix B 12.8, Par. B.1). A half inﬁnite interval of integrating in (4.71) was substituted by ﬁnite section [0, ω ∗ ]; the quantity ω ∗ was determined numerically by minimizing the error. √ + /Λ as a Figure 4.29 illustrates the changes of quantities λ = π KIII ∗ function of t for the case where the shear force (curve 1) or the electric charge (curve 2) act in a piezoceramic space with a linear crack. It was assumed that the material under study was PZT-4 ceramics parallel to the axis of the crack abscissa, is free from force and its center is at a distance of h/ = 3 (2 is the crack length) from the line of the source action (x10 = 0). The values of the impulse parameters were set to T ∗ = 10, d∗1 = 1, d∗2 = 8, σ1∗ = 1N/ (s · m) , σ2∗ = 1cal (s · m) σν∗ = c0 σν h−1 (v = 1 , 2 ). Λ = σ1 if P0 (t) = E 0, Q0 (t) = 0 and Λ = σ2 cE 44 /e15 if P0 (t) = 0, Q0 (t) = 0 and Λ = σ2 c44 /e15 if P0 (t) = 0, Q0 (t) = 0. As it follows from Fig. 4.29 the waves of stress don’t have the time√to reach h2 + 2 , the crack tips under the action of shear forces√ and for time t < c−1 ∗ −1 −1 2 2 therefore KIII = 0. In the time interval c∗ h + < t < 2.22c∗ h the quantity λ increases rapidly up to their global maximum λmax ≈ 0.28, and then, some time later tends to the “static” √ of λ0 ≈ 0.16, correspond value −1 −1 ing to the time interval 6c h < t < c h2 + 2 . After the impulse 9h + ∗ ∗ −1 t > 10c∗ h goes away the quantity λ decreases to the value λmin ≈ −0.12 and in the consequent time the stress intensity factor tends to zero due to the energy dispersion at inﬁnity. Under the action of an electric charge we get a quite diﬀerent picture. Due to the quasistatic character of the process appearing at the initial moment of time t = 0 the electric ﬁeld of the charge inﬂuences the crack instantaneously causing stresses in its vicinity. It is in−1 teresting to note that in time period 6c−1 ∗ h < t < 9c∗ h, corresponding to “static” behavior of electroacoustic ﬁelds the stress intensity factor is close to 0.30

λ

1 0.15

2

0.00

t*

–0.15 0.0

3.2

Fig. 4.29. Changes of quantity λ = a linear crack

6.4

9.6

12.8

16.0

+ πlKIII /Λ as a function of t∗ in a space with

4.7 A Layer

167

λ

0.8

1 0.5 1 0.2 2 –0.1

t*

–0.4 0

4

8

12

16

Fig. 4.30. Behaviour of quantity λ as a function of t∗ in a halfspace with a parabolic crack

zero (Fig. 4.29). This situation is conditioned by the fact that in statics due to condition of antiplane deformation the electric excitation of the piezomedium does not causes stresses in it. Figure 4.30 depicts the behavior of quantity λ in a halfspace with a parabolic crack ξ1 = p1 δ, ξ2 = p2 δ 2 + h, −1 ≤ δ ≤ 1 in the case where the line of the source action is in the parabola focus (h/p1 = 1, p2 /p1 = −0.25). The rather chaotic state appearing in the above ﬁgure is due to the appearence of the reﬂected, from the boundary, halfspace waves. To estimate the inﬂuence of the piezoelectric eﬀect on the stress intensity factor in Figs. 4.29 and 4.30, dashed lines corresponding to piezopassive media (e15 = 0), in case when P0 (t) = 0, Q0 (t) = 0 are given. At this point we should mention that the developed approach to the analysis of non-stationary dynamic electroelastic ﬁelds in the medium with cracks are eﬀective and may be generalized for several cracks of various conﬁgurations.

4.7 A Layer Let the piezoceramic layer 0 ≤ x1 ≤ a, −∞ < x2 < ∞, −∞ < x3 < ∞ deﬁned in the Cartesian system of coordinates with a tunnel along x3 -axis; the cracks Lj (j = 1, 2, . . . , k) are excited by radiating at inﬁnity a monochromic shear wave (see Fig. 4.31). On the boundaries of the cracks there may also act shear + − stress X3n = X3n = −X3n = Re X3 e−iωt harmonically changing with time and constant along axis x3 . Let us suppose that the main layer is not subjected to any force and is bounded with vacuum (the direction of polarization of the ceramics is parallel to axis x3 ). It is required to determine the electroacoustic wave ﬁelds and stress intensity factor KIII .

168

4 Diﬀraction of a Shear Wave

X2 n bj Lj

ψ

L1

aj

O

X1

Fig. 4.31. The scheme of a layer with curvilinear cracks

As it was mentioned above, the given problem includes the integration of (4.46) at the corresponding boundary conditions on the cuts of (4.32) type, and also at mechanical and electric conditions on the basis of a layer. The latter may be formally represented in the form of σ13 = 0,

D1 = 0

(x1 = 0, a) .

(4.74)

Let us now construct the Green’s function for a piezoelectric layer. The Boundary problems (4.46) and (4.74) with respect to the amplitudes using (4.29) are given by ∇2 U3 + γ 2 U3 = 0, 2

∇ F = 0,

∂2 F = 0

∂1 U3 = 0

(x1 = 0, a) ,

(x1 = 0, a) .

(4.75) (4.76)

Green’s functions corresponding to problems (4.75), (4.76) read [147] G (ζ, z) =

∞ 1

bν (x2 − ξ2 ) cos αν ξ1 cos αν x1 ,

ν=0

E (ζ, z) =

∞ 1

dν (x2 − ξ2 ) sin αν ξ1 sin αν x1 ,

ν=1

∇2 G + γ 2 G = δ (x1 − ξ1 , x2 − ξ2 ) ,

αν =

πν , a

∇2 E = δ (x1 − ξ1 , x2 − ξ2 ) = δ (x1 − ξ1 ) δ (x2 − ξ2 ) , z = x1 + ix2 ,

ζ = ξ1 + iξ2 .

where δ (x) is 2a - periodical Dirac δ - function.

(4.77)

4.7 A Layer

169

Using the following expansion ∞ 1 21 δ (x1 − ξ1 ) = + cos αν ξ1 cos αν x1 , a a ν=1

(4.78)

∞

δ (x1 − ξ1 ) =

21 sin αν ξ1 sin αν x1 , a ν=1

If we separate the variables in (4.75), (4.76) and then apply the procedure of the fundamental solution of a usual diﬀerential equation we ﬁnd 1 −λν |x2 −ξ2 | 1 iγ|x2 −ξ2 | e e , b0 = , aλν 2iaγ 1 −αν |x2 −ξ2 | dν = − e , aαν α2ν − γ 2 , γ < αν (ν = 1, 2, . . .) . λν = −i γ 2 − α2ν , γ > αν bν = −

(4.79)

A series of function E(ζ, z) in (4.77) allowing for (4.79) is easily summed using equality ∞ 1 |x| 1 e−m|x| cos my = − n [2 (ch x − cos y)] m 2 2 m=1

(4.80)

and has the form

) ) ) π (ζ − z) π (ζ + z) )) 1 ) n sin sec E (ζ, z) = , 2π ) 2a 2a ) z = x1 + ix2 ,

z = x1 − ix2 . (4.81)

To single out the main part of function G(ζ, z) we write down Green’s function G0 of the senior operator in Helmh¨ oltz (4.77). Summing up the corresponding series by using (4.80) we obtain ∞ 1 1 |x2 − ξ2 | + am (x1 , ξ1 ) e−αm |x2 −ξ2 | = − a m=1 2a ) ) ) π (ζ + z) )) 1 π (ζ − z) ) n 4 sin sin + , 2π ) 2a 2a ) cos αm ξ1 cos αm x1 . am = αm

G0 = −

(4.82)

170

4 Diﬀraction of a Shear Wave

Allowing for (4.79), (4.82) let us represent function G in (4.77) in its ﬁnal form G (ζ, z) = G0 + G1 ,

(4.83)

∞ 1 iγ|x2 −ξ2 | 1 1 e G1 = − cm (x2 − ξ2 ) cos αm ξ1 cos αm x1 , 2iaγ a m=1

cm (x2 − ξ2 ) =

1 −λm |x2 −ξ2 | 1 −αm |x2 −ξ2 | e − e λm αm

(m = 1, 2, . . .) .

Thus, the functions E(ζ, z) and G(ζ, z) determined by formulas (4.81) – (4.83) are the Green’s functions of the boundary problems (4.75), (4.76) for a strip. The conditions of radiation in problem (4.75) and damping in problem (4.76) are satisﬁed. After we examine the main singularities in (4.77) the general compound of the series in (4.83) damps at point z = ζ as m−3 . Summarized displacement ﬁeld U3 will be found similarly to [147]

∂G (ζ, z) (0) U3 (x1 , x2 ) = [U3 ] ds + U3 , ζ ∈ L. (4.84) ∂nζ L

Here the unknown quantity [U3 ] has the meaning of a jump of displacement amplitude U3 on L, the integral term reﬂects the cut dispersed ﬁeld and (0) compound U3 = τ exp (−iγx2 ) corresponds to a falling shear wave. The function F is represented in the following way

F (x1 , x2 ) = f (ζ)E (ζ, z) ds, (4.85) L

Where ds is the element of arc contour length L. In order to give the physical meaning of “density” f (ζ) in (4.85) let us ﬁrst calculate the derivatives ∂U3 /∂z, ∂U3 /∂z. As a result, after some transformations to improve the convergence of slowly converging series we obtain

∂U3 π π (ζ − z) = dζ+ p (ζ) cosec2 ∂z 8ia2 2a L

τ γ −iγx2 + p (ζ) R1 eiψ + R3 e−iψ ds − e , 2 L

π ∂U3 2π ζ − z =− dζ+ p (ζ) cosec ∂z 8ia2 2a L

τ γ −iγx2 e + p (ζ) R2 eiψ + R4 e−iψ ds + , 2 L

4.7 A Layer

171

iγ iγ|x2 −ξ2 | 1 e [A1 − B2 − i (A2 + B1 )] , − 4a 2a π (ζ + z) iγ π − R2 (ζ, z) = − eiγ|x2 −ξ2 | − 2 cosec2 4a 8a 2a 1 − [A1 + B2 + i (A2 − B1 )] , 2a iγ iγ|x2 −ξ2 | π 2π ζ +z R3 (ζ, z) = − e − − 2 cosec 4a 8a 2a 1 − [A1 + B2 − i (A2 − B1 )] , (4.86) 2a iγ iγ|x2 −ξ2 | 1 R4 (ζ, z) = e [A1 − B2 + i (A2 + B1 )] , − 4a 2a ) ) π (ζ − z) )) aγ 2 )) π (ζ + z) + A1 = n )sin sec 4π 2a 2a ) ∞ 2 1 αν −λν |x2 −ξ2 | γ2 + e − αν + e−αν |x2 −ξ2 | sin αν ξ1 sin αν x1 , λν 2αν ν=1

R1 (ζ, z) =

A2 =

∞ 1

αν βν− sign (x2 − ξ2 ) sin αν ξ1 cos αν x1 ,

ν=1 ∞ 1

B1 = −

αν βν− sign (x2 − ξ2 ) cos αν ξ1 sin αν x1 ,

ν=1

) ) π (ζ − z) π (ζ + z) )) γ2 aγ 2 )) + |x2 − ξ2 | − n )4 sin sin B2 = 4 4π 2a 2a ) ∞ 1 γ2 −αν |x2 −ξ2 | −λν |x2 −ξ2 | + − λν e αν − e cos αν ξ1 cos αν x1 , 2αν ν=1 βν− = e−λν |x2 −ξ2 | − e−αν |x2 −ξ2 | ,

p (ζ) =

[U3 ] . 2

Calculating the limiting values of derived functions (4.85) at z → ζ0 ∈ L we ﬁnd ∂F ∂F eiψ e−iψ f (ζ) , f (ζ) . (4.87) =− =− ∂ζ 2 2 ∂ζ Hence the last condition in (4.32) is satisﬁed automatically while the one above it allowing for (4.86), (4.87) results to equality expressing the connection of function f (ζ) from (4.85) with a derivative from the displacement jump f (ζ) =

2e15 p (ζ) , ε11

p (ζ) =

dp (ζ) . ds

(4.88)

Now substituting the limiting functions (4.86) and the derivatives ∂F/∂z, ∂F/∂ z¯ at z → ζ0 into mechanical boundary condition (4.32) on one of the edges L and using relations (4.88) we get a singular integrodiﬀerential equation

172

4 Diﬀraction of a Shear Wave

referring to the amplitude of the displacement jump on L:

p (ζ) g1 (ζ, ζ0 ) ds+ p (ζ) g2 (ζ, ζ0 ) ds = N (ζ0 ), L

(4.89)

L

, . π ζ + ζ0 1 π (ζ − ζ0 ) iψ0 2 g1 (ζ, ζ0 ) = Im e − k15 ctg , ctg a 2a 2a # iψ0 iψ 0 $ 2 g2 (ζ, ζ0 ) = 2 1 + k15 e e R1 + e−iψ R30 + e−iψ0 eiψ R20 + e−iψ R40 , −iγξ20 2 2 e N (ζ0 ) = E X3 + 2iγτ 1 + k15 sin ψ0 , c44 ψ0 = ψ (ζ0 ) ,

ζ0 = ξ10 + iξ20 ∈ Lj

(j = 1, 2, . . . , k) .

where the Kernel g1 (ζ, ζ0 ) is singular (of Hilbert type); the Kernel g2 (ζ, ζ0 ) on the assumptions concerning L may have just a slight singularity; functions 0 = Rm (ζ, ζ0 ) are determined from (4.86). Rm The equation (4.89) should be considered together with the additional condition of (4.50) type on Lj (j = 1, 2, . . . , k). The asymptotic analysis of stresses on the continuation across cut tip L brings to formulas (4.51). As an example let us consider a layer (ceramics PZT-4) with a straight crack oriented at angle ϕ to axis x1 . The center of the crack of length 2 is located in the middle of the layer. Figs. 4.32, 4.33 illustrate the behavior ± E relevant to stress intensity factor KIII = c44 |Ω0 (±1)| / |Λ| s (±1) in the cases of loading X3 = const, τ = 0 and X3 = 0, τ = const, respectively. The solid lines correspond to a, the dashed to b. The curve with number m ±

5.7

1 2.9 2 3 4 ϕ

5 0.1 0

0.5π

π

± Fig. 4.32. Behaviour of < KIII > as a function of orientation angle φ of the crack, in layer, for various values of γ ∗ α (X3 = 0, τ = const)

4.7 A Layer

173

±

2.8

1 2.1 2 1.4

3 4

0.7

5 ϕ

0.0

π

0.5π

0

± Fig. 4.33. Behaviour of < KIII > as a function of orientation angle φ of the crack, in layer, for various values of γ ∗ α (X3 = 0, τ = 0)

2 = is constructed forthe value of normalized wave number γ ∗ a = γa 1 + k15 3.5 + 0.2 (m − 1) m = 1, 5 and /a = 0.3. + in a layer with parabolic crack (ξ1 + iξ2 = The changes of quantity KIII δ (p1 + ip2 δ) + p3 ) as a function of parameter γ ∗ a for the variants of loading τ = 0, X3 = 0 and X3 = 0, τ = 0 is shown in Figs. 4.34 and 4.35, respectively. Curves 1, 2, . . . , 4 correspond to values p1 /a = 1/5, p3 /a = 1/2, p2 /a = < K+ >

3.5

III

2.8

1

2.1 2 1.4 3 4

0.7

γ*a 0.0 0.0

1.2

2.4

3.6

4.8

6.0

± Fig. 4.34. Behaviour of < KIII > as a function of normalized wave number γ ∗ α in a layer with a parabolic crack (X3 = 0, τ = 0)

174

4 Diﬀraction of a Shear Wave + III

0.80

1 0.68 2 0.56 3 0.44

0.32

4 γ*a

0.20 0.0

1.2

2.4

3.6

4.8

6.0

± KIII

Fig. 4.35. Behaviour of < > as a function of normalized wave number γ ∗ α in a layer with a parabolic crack (τ = 0, X3 = 0)

0.5, 0.7, 0.9 and 1.1. Let us mention that if the crack is parallel +tox1 -axis (in the with its center located in the middle of the layer, quantity KIII considered interval of frequencies) is changing slightly. The stress intensity factor KIII may be determined by the formula √ ± ± (cos ωt − arg Ω0 (±1)) , = ±Λ π KIII KIII Ω0 (δ) √ , δ ∈ [−1, 1] , (δ) 1 − δ 2 2 Where Λ = |X3 | and Λ = γ |τ | cE 44 1 + k15 in the corresponding cases of the harmonic loading. It must be noted that when the wave number γ exceeds value αm = mπ/a (m = 1, 2, . . .) instability of the solution is observed, due to the existence a new running wave carrying the power along the waveguide from the defect to inﬁnity. p (ζ) =

s

4.8 A Halﬂayer. Various Variants of Boundary Conditions With the help of the method of images the Green’s function we found above for a piezoceramic layer may be generalized for the case of a strip (0 ≤ x1 ≤ a, 0 ≤ x2 ≤ ∞, −∞ ≤ x3 ≤ ∞). Let us assume that the side bases of the strip are free from forces and is bound with vacuum. On the boundary x2 = 0 the following types of mechanical and electric conditions may occur.

4.8 A Halﬂayer. Various Variants of Boundary Conditions

175

a) Lack of forces, ﬁxed with vacuum σ23 = 0,

D2 = 0;

(4.90)

b) Rigid constraint, the boundary covered with electrodes and grounded u3 = 0,

E1 = 0.

(4.91)

It is not diﬃcult to conclude that Green’s functions in that case are determined by formulas (4.77) where factors bν , dν have the form 1 −λν |x2 −ξ2 | e − Ae−λν (x2 +ξ2 ) , aλν 1 iγ|x2 −ξ2 | b0 = e − Aeiγ(x2 +ξ2 ) , 2iaγ 1 −αν |x2 −ξ2 | e (ν = 1, 2, . . .) . dν = − + Ae−αν (x2 +ξ2 ) aαν

bν = −

(4.92)

Summarizing the corresponding series in (4.77) allowing for (4.92) we obtain

i ∗ G (ζ, z) = G (ζ, z) + A eiγ(x2 +ξ2 ) + 2aγ ) ) ) π (ζ + z) 1 π (ζ − z) )) x2 + ξ2 ) + (4.93) − n 4 sin sin + 2a 2π ) 2a 2a ) +

∞ 1 1 ∗ c (x2 + ξ2 ) cos αm ξ1 cos αm x1 a m=1 m

,

E ∗ (ζ, z) = E (ζ, z) + ) ) π (ζ + z) )) A )) π (ζ − z) n sin sec + , 2π ) 2a 2a ) c∗m (x2 + ξ2 ) =

1 −λm (x2 +ξ2 ) 1 −αm (x2 +ξ2 ) e − e λm αm

z = x1 + ix2 ,

ζ = ξ1 + iξ2 .

(m = 1, 2, . . .) ,

Here the case A = −1 corresponds to a free boundary with vacuum halﬂayer; the case A = 1 – corresponds to a ﬁxed and covered with grounded electrodes along boundary x2 = 0 halﬂayer; the functions G and E are determined in (4.81)–(4.83).

176

4 Diﬀraction of a Shear Wave

The integral representation of solutions of initial (4.75) and (4.76) in the given case has the form similar to (4.84), (4.85)

∂G∗ (ζ, z) (0) (1) ds + U3 − AU3 , (4.94) U3 (x1 , x2 ) = [U3 ] ∂nζ L

F (x1 , x2 ) =

f (ζ)E ∗ (ζ, z) ds,

z = x1 + ix2 ,

ζ ∈ L,

L (1)

where U3 = τ exp (iγx2 ) corresponds to the reﬂected from the boundary halfspace x2 = 0 shear wave. Carrying out the same procedure allowing for expressions (4.93), (4.94) as in Sect. 4.7 we get the follwoing integro-diﬀerentiated equation

∗ p (ζ) g1 (ζ, ζ0 )ds + p (ζ) g2∗ (ζ, ζ0 )ds = N (ζ0 ) , (4.95) L

L

/ , .0 2 π ζ − ζ Ak π (ζ + ζ ) 0 0 15 Im eiψ0 ctg + ctg , g1∗ (ζ, ζ0 ) = g1 (ζ, ζ0 ) − a 2a 2a # iψ0 ∗ iψ $ 2 g2∗ (ζ, ζ0 ) = 2 1 + k15 e R1 e + R3∗ e−iψ + e−iψ0 R2∗ eiψ + R4∗ e−iψ , N (ζ0 ) =

2 2 X3 + 2iγτ 1 + k15 sin ψ0 e−iγξ20 + Aeiγξ20 , E c44

R1∗ = R10 +

1 π (ζ + z) iγA iγ(x2 +ξ2 ) Aπ e − [A∗ − B2∗ − i (A∗2 + B1∗ )] , + 2 cos ec2 4a 8a 2a 2a 1

(4.96)

1 iγA iγ(x2 +ξ2 ) Aπ π (ζ − z) e − [A∗ + B2∗ + i (A∗2 − B1∗ )] , − 2 cos ec2 4a 8a 2a 2a 1 1 Aπ ∗ 0 iγA iγ(x2 +ξ2 ) 2π ζ − z e − [A∗ + B2∗ − i (A∗2 − B1∗ )] , − 2 cos ec R3 = R3 − 4a 8a 2a 2a 1 1 Aπ ∗ 0 iγA iγ(x2 +ξ2 ) 2π ζ + z R4 = R4 + e − [A∗ − B2∗ + i (A∗2 + B1∗ )] , + 2 cos ec 4a 8a 2a 2a 1 ∞ 2 1 αν −λν (x2 +ξ2 ) A∗1 = A1 − A e − αν e−αν (x2 +ξ2 ) sinαν ξ1 sin αν x1 , λν ν=1

R2∗ = R20 −

A∗2 = A2 − A

∞ 1 ν=1

αν βν+ sinαν ξ1 cos αν x1 ,

4.8 A Halﬂayer. Various Variants of Boundary Conditions

177

+

4.2 4 3

2.8

2 1 1.4

γ *a 0.0 0

2

4

6

± Fig. 4.36. Changes of < KIII > as a function parameter γ ∗ α in a halﬂayer with a parabolic crack (X3 = 0, A = −1)

B1∗ = B1 − A

∞ 1

αν βν+ cosαν ξ1 sin αν x1 ,

ν=1

B2∗ = B2 + A

∞ ! " 1 αν e−αν (x2 +ξ2 ) − λν e−λν (x2 +ξ2 ) cosαν ξ1 cos αν x1 , ν=1

βν+ = e−λν (x2 +ξ2 ) − e−αν (x2 +ξ2 ) ,

p (ζ) =

[U3 ] 2

(ν = 1, 2, . . .) .

+

2.7

1.8

2

1

3

0.9

4 γ *a

0.0 2

0 ± KIII

4

6

Fig. 4.37. Changes of < > as a function of parameter γ ∗ α in a halﬂayer with a parabolic crack (τ = 0, A = −1)

178

4 Diﬀraction of a Shear Wave +

12

4 8 3 2

4

1 γ *a 0 0

2

4

6

± Fig. 4.38. Changes of < KIII > as a function of parameter γ ∗ α in a halﬂayer with a parabolic crack (X3 = 0, A = 1)

The functions g1 (ζ, ζ0 ) , Ai , Bi and Ri0 = Ri (ζ, ζ0 ) appearing in the above expressions are determined in (4.89), (4.86). Equation (4.95) should be solved together the additional conditions of (4.50). Figures 4.36–4.43 show results form the numerical solution of integro diﬀerential (4.95) for a halﬂayer with parabolic crack ξ1 +iξ2 = δeiϕ (p1 +ip2 δ) +p3 + ih, δ ∈ [−1, 1]). +

4

3

1 2

1 3 4

γ *a 0 0

2

4

6

± Fig. 4.39. Changes of < KIII > as a function of parameter γ ∗ α in a halﬂayer with a parabolic crack (τ = 0, A = 1)

4.8 A Halﬂayer. Various Variants of Boundary Conditions

179

–

28

5

14

2

4 3 1

ϕ

0

π/2

0

Fig. 4.40. Changes of < γ ∗ α (X3 = 0, A = −1)

± KIII

π

> as a function of φ for various values of

7.4

2 3

3.7

4 5 1 ϕ

0.0 0

π/2

π

± Fig. 4.41. Changes of < KIII > as a function of φ for various values of ∗ γ α (τ = 0, A = −1)

The graphs in Figs. 4.36 (X3 = 0) and Fig. 4.37 (τ = 0) are constructed for A = −1, ϕ = 0, p3 /a = 1/2, p1 /a = 0.3, h/a = 0.3, p2 /a = 0.1 (m − 1) (m is the curve number); Figs. 4.38, 4.39 show the same things but for A = 1, h/a = 0.6. The curves in Figs. 4.40 (X3 = 0) and Fig. 4.41 (τ = 0) correspond to A = −1, p3 /a = 0.5, p1 /a = 0.3, p2 /a = 0, h/a = 1, γ ∗ a = 3 + 0.3 (m − 1); Fig. 4.42 (X3 = 0) and Fig. 4.43 (τ = 0) correspond to

180

4 Diﬀraction of a Shear Wave ±

2.5

5

1.6 4 3 2 1 ϕ

0.7 π/2

0

π

± Fig. 4.42. Changes of < KIII > as a function of φ for various values of ∗ γ α (X3 = 0, A = 1)

±

1.90

1 2 3 4

0.95

5

ϕ

0.00 π/2

0

Fig. 4.43. Changes of < γ ∗ α (τ = 0, A = 1)

± KIII

π

> as a function of φ for various values of

the same values of parameters but for A = 1, h/a = 0.5 and γ ∗ a = 1 + 0.5 (m − 1) , (m = 1, 2, . . . , 5).

5 Scattering of a Shear Wave by Cylindrical Inhomogeneities in Piezoceramic Media of Various Conﬁgurations (Antiplane Deformation)

In this chapter we study antiplane stationary and non-stationary dynamic problems of electroelasticity on the diﬀraction of a shear wave in tunnel cavities and inhomogeneous cylindrical inclusions in piezoceramic media. We derive algorithms in the form of singular integral and integrodiﬀerential equations for the investigation of the concentration of stresses in the vicinity of inhomogeneities.

5.1 A Space and a Half-Space with Tunnel Openings Let us start by considering a half-inﬁnite piezoceramic medium (x2 ≥ 0) in the Cartesian system of coordinates, Ox1 x2 x3 , containing tunnel openings Γm (m = 1, 2, . . . , n) with parallel to optic x3 - axis. A constant generators shear loading Zn = Re Ze−iωt acts along x3 - axis on the surfaces of the cavities and let a plane monochromic shear wave radiating under angle β to x1 - axis from inﬁnity: (0) (0) (0) u3 = Re U3 e−iωt , U3 = τ e−i(α1 x1 +α2 x2 ) , ω (5.1) α1 = γ cos β, α2 = γ sin β, γ = , c∗ 1/2 2 cE e2 44 1 + k15 2 c= , k15 = ε 15 E . ρ 11 c44 The boundary of the halfspace x2 = 0 is taken to be ﬁxed or free of loading. In the case of a ﬁxed halfspace we consider that the boundary is electroded with a zero potential (E1 = 0); for a free halfspace bounded with vacuum it is assumed that D2 = 0 at the boundary.

182

5 Scattering of a Shear Wave

Let us assume that the electric potential is equal to zero on the surfaces of the cavities, indicating that the plating of the cavities is grounded electrodes. We consider that the curvature of contour the Γm (∩Γm = ∅) and the amplitudes of shear forces Z = {Zm (ζ) , ζ ∈ Γm } satisfy H¨older’s condition. Within this framework of analysis, the body (area Ω) is subject to the coupled wave ﬁelds of stresses σ13 (x1 , x2 ) , σ23 (x1 , x2 ) as well as electric and magnetic stresses E1 (x1 , x2 ) , E2 (x1 , x2 ) and H3 (x1 , x2 ), respectively. Following the analysis presented in Sect. 4.2, the full system of equations of the assumed antiplane problem of electroelasticity in the quasistatic approximation is reduced to the Helmh¨ oltz and Laplace (4.46) with respect to the functions U3 (x1 , x2 ) and F (x1 , x2 ). The only diﬀerence is the recording of mechanical and electric boundary conditions on the surface of openings Γm (m = 1, 2, . . . , n). In that case, due to (4.25), (4.29) these conditions are represented in the form iψ ∂ U3 2 −iψ ∂ U3 iψ ∂ F −iψ ∂ F + e − e cE − ie = Z, (5.2) e 1 + k e 15 44 15 ∂ζ ∂ζ ∂ ζ¯ ∂ ζ¯ ie15 iψ ∂ U3 ∂F ∂F −iψ ∂ U3 − e + e−iψ ¯ = 0. + eiψ e ε11 ∂ζ ∂ζ ∂ ζ¯ ∂ζ Here derivatives ∂U3 /∂ζ, ∂U3 /∂ζ, ∂F/∂ζ, ∂F/∂ζ are evaluated at the limit of z = x1 + ix2 → ζ ∈ Γ with the transition taking place from the medium to the hole, while ψ is the angle between the contour of the cavity and Ox1 -axis (Fig. 5.1). Thus, the initial boundary problem is reduced to the deﬁnition of functions U3 and F from diﬀerential (4.46), boundary conditions (5.2) and also the conditions on the boundary halfspace. For the derivation of the corresponding integral equations it is necessary to have the general representations of the formulas U3 and F .The wave ﬁeld in a halfspace with cavities is the result of the sum incoming and reﬂected (from the boundary) waves as well

β

Γm

n

X2 Γ1 O

X1

Fig. 5.1. The scheme of a halfspace with openings

5.1 A Space and a Half-Space with Tunnel Openings

183

as the ones scattered by the cavities, so let us represent these functions in the form [183]

(0) (1) (1) (1) U3 (x1 , x2 ) = U3 − AU3 + p (ζ) H0 (γr) − AH0 (γr1 ) ds, 1 F (x1 , x2 ) = π

Γ

f (ζ) ( nr + A nr1 )ds,

(5.3)

Γ

r = |ζ − z| , r1 = ζ¯ − z , z = x1 + ix2 ∈ Ω, ζ ∈ Γ = ∪Γm . (1)

Here p (ζ) and f (ζ) are the unknown “densities”; Hν (x) is the (1) Hankel’s function of the ﬁrst kind and of ν-th order; the quantity U3 = τ exp (−i (α1 x1 − α2 x2 )) is the amplitude of the displacement of a wave reﬂected from the boundary of a homogeneous halfspace. The value of A = −1 corresponds to the free, bounded with vacuum halfspace. The value of A = 1 corresponds to the ﬁxed and covered by grounded electrodes halfspace. The integral representations (5.3) satisfy (4.46), the mechanical and electric conditions on the boundary halfspace x2 = 0 and also the conditions of radiation. Substituting the limiting values of derivatives ∂U3 /∂z, ∂U3 /∂z, ∂F/∂z, ∂F/∂z, at z → ζ0 ∈ Γm (m = 1, 2, . . . , n) in the boundary conditions (5.2) we get a system of two singular integral equations of the second kind with respect to the functions p (ζ) and f (ζ)

p (ζ0 ) + p (ζ)g1 (ζ, ζ0 ) ds + f (ζ) g2 (ζ, ζ0 )ds = N1 (ζ0 ) , Γ

Γ

− f (ζ0 ) +

f (ζ)g3 (ζ, ζ0 ) ds + Γ

p (ζ) g4 (ζ, ζ0 )ds = N2 (ζ0 ) , Γ

eiψ0 iγ 1 − [H1 (γr0 ) cos (ψ0 − α0 ) − g1 (ζ, ζ0 ) = − Re π ζ0 − ζ 2 (1) −AH1 (γr10 ) cos (ψ0 − α10 ) , ie15 ImG (ζ, ζ0 ) , g3 (ζ, ζ0 ) = ReG (ζ, ζ0 ) , 2 ) (1 + k15 1 1 iψ0 A + ¯ G (ζ, ζ0 ) = , e π ζ − ζ0 ζ − ζ0 eiψ0 cE k 2 2 Im + γ [H1 (γr0 ) sin (ψ0 − α0 ) − g4 (ζ, ζ0 ) = 44 15 e15 πi ζ − ζ0 (1) −AH1 (γr10 ) sin (ψ0 − α10 ) , g2 (ζ, ζ0 ) =

2cE 44

(5.4)

184

5 Scattering of a Shear Wave

N1 (ζ0 ) =

N2 (ζ0 ) =

γτ −i(α1 ξ10 +α2 ξ20 ) Z (ζ0 ) + e cos (ψ0 − β) − 2 2 (1 + k15 ) −Ae−i(α1 ξ10 −α2 ξ20 ) cos (ψ0 + β) , 2icE 44

ie15 γτ −i(α1 ξ10 +α2 ξ20 ) e sin (ψ0 − β) − ε11 −Ae−i(α1 ξ10 −α2 ξ20 ) sin (ψ0 + β) ,

2i (1) + H1 (x) , r0 = |ζ − ζ0 | , r10 = ¯ ζ − ζ0 , πx α0 = arg (ζ − ζ0 ) , α10 = arg ζ¯ − ζ0 , ψ0 = ψ (ζ0 ) , ζ0 = ξ10 + iξ20 ; ζ, ζ0 ∈ Γ. H1 (x) =

Here, the functions g2 (ζ, ζ0 ) , g4 (ζ, ζ0 ) represent singular kernels of Cauchy type; the value A = 1 corresponds to a ﬁxed halfspace, and that of A = −1 corresponds to a free one. At A = 0 we have an unrestricted space with cavities. Here, we can show that the summed index in (5.4) is equal to zero and, hence, it is uniquely solvable under the assumption that the corresponding homogeneous system of integral equations has only trivial solution [41]. It should be also mentioned that at e15 = 0 the system of integral (5.4) is divided into two independent equations with respect to the functions p (ζ) and f (ζ). In this case the integral equation with the “density” p (ζ) corresponds to a piezopassive (isotropic) halfspace with cavities. Remark. It is possible, considering the harmonic oscillations of a multicoupled piezoelectric cylinder with tunnel cavities Γm (m = 1, 2, . . . , n), excited by harmonic shear forces, to apply the obtained system of integral (5.4). For that it is necessary to set A = 0, Γ = ∪Γj (j = 0, 1, 2, . . . , n), where Γ0 denotes the outer contour of a cylinder; the terms corresponding to shear waves should be omitted. The direction of tracing of all contour Γm while calculating (5.4) should be fulﬁlled in such a way that the area of the body is left on the left. To determine the concentration of stresses in a halfspace with cavities we have to calculate the shear stress σϑ , = σ23 cos ψ − σ13 sin ψ on the surface Γ: iψ0 ∂ U3 2 σϑ = Re T e−iωt , T = T (ξ10 , ξ20 ) = icE 1 + k e − (5.5) 44 15 ∂ ζ0 ∂ U3 ∂F ∂F + e−iψ0 ¯ , ζ0 ∈ Γm (m = 1, 2, ..., n) , −e−iψ0 ¯ + e15 eiψ0 ∂ ζ0 ∂ ζ0 ∂ ζ0 Where the partial derivatives are calculated at z → ζ0 ∈ L of area Ω; ϑ is the angle between the positive tangential to the contour of an opening at the point ζ0 and Ox1 -axis.

5.1 A Space and a Half-Space with Tunnel Openings

185

It is more convenient to represent formula (5.5) in another, excluding all its terms containing function F . Substituting the second boundary condition into (5.2) and the limiting values of the functions ∂U3 /∂z, ∂U3 /∂z (z → ζ0 ∈ Γ) calculated using (5.3) we ﬁnd ⎡ ⎤

e15 ⎣ (5.6) T (ζ0 ) = 2 N2 (ζ0 ) − p (ζ) g4 (ζ, ζ0 )ds⎦ . k15 Γ

The functions g4 (ζ, ζ0 ) and N2 (ζ0 ) are deﬁned in (5.4).

0 0 (S23 In Table 5.1 we give the approximated values of max T /S23 is the modulus of amplitude of stress σ23 in a shear wave) on the contour of elliptic cavity (ξ1 = R1 cos ϕ, ξ2 = R2 sin ϕ) in a space made by of PZT-4 2 (β = π/2, ceramics, for diﬀerent values of parameter γ ∗ R = γR 1 + k15 R = 0.5 (R1 + R2 )). Figures

5.2–5.4 illustrate the behaviour of the relative tangential stress 0 at the point ϕ = 0 of the contour of an elliptic opening according δ = T /S23 to normalized wave number γ ∗ R, respectively, for the values of parameter A = 0, −1 and 1. The curve with number k corresponds to h/R1 = 2, β = π/2 and R2 /R1 = 0.5 + 0.25 (k − 1). The dashed line in Fig. 5.2 corresponds to the piezopassive space with the singular cavity. The results obtained by the method of series in [65] are represented by circles. Figure 5.5 and Fig. 5.7 depict changes of the quantity δ on the contour of the opening under the inﬂuence of shear (β = π/2) for A = 0, −1 and 1, respectively. In Fig. 5.5 the curve k is calculated for γ ∗ R = 0.4, R2 /R1 = 0.25k, while in Figs. 5.6 and 5.7 for γ ∗ R = 0.4, h/R1 = 2 and γ ∗ R = 0.5, h/R1 = 5, R2 /R1 = 0.25k, respectively. Here, we should note that the above results correspond to the diﬀraction of a plane monochromatic wave in the cavity. In practice, what interests to 0 Table 5.1. Approximate values of max | T /S23 | on the contour of the elliptic cavity in a space made by PZT-4 ceramic for diﬀerenct values of the parameter γ ∗ R

γ∗R

R1 /R2 = 2 PZT-4

e15 = 0

R1 /R2 = 1 PZT-4

e15 = 0

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

3 3.072 3.222 3.406 3.570 3.636 3.536 3.265 2.902 2.536 2.221

3 3.049 3.139 3.229 3.282 3.264 3.157 2.974 2.745 2.508 2.288

2 2.065 2.184 2.290 2.314 2.221 2.059 1.907 1.808 1.768 1.773

2 2.033 2.079 2.095 2.060 1.975 1.668 1.757 1.660 1.576 1.498

186

5 Scattering of a Shear Wave 3.7

δ 1

2.8

2 3

1.9

1.0

4 γ *R 0

1

2

3

0 |T /S23 |

Fig. 5.2. Changes of the quantity δ = at point ϕ = π of the contour of an elliptic opening with respect to the parameter γ ∗ R in a space during the radiation of a shear wave 9.0

δ 1 2

4.5

3 4 γ *R

0.0 0.0

0.5

1.0

0 Fig. 5.3. Changes of the quantity δ = |T /S23 | at the point ϕ = π of the contour of an elliptic opening with respect to the parameter γ ∗ R in a halfspace (A = −1)

δ

6

4

1 4

3 2

0

2

γ *R 0

1

2 0 |T /S23 |

3

Fig. 5.4. Changes of the quantity δ = at the point ϕ = π of the contour of an elliptic opening with respect to parameter γ ∗ R in a halfspace (A = 1)

5.1 A Space and a Half-Space with Tunnel Openings

187

δ

6.2

1

2 3.1

3 4 5 6

ϕ 0.0

π/2

π

3π/2

Fig. 5.5. Changes of the quantity δ on the contour of an opening under the inﬂuence of the shear wave in a space

study is the interaction of cylindrical waves with defects. As reﬂectors of a cylindrical shear wave let us study linear sources, that is either electric charges or shear forces, concentrated on line x1 = x10 , x2 = 0, −∞ < x3 < ∞ of the boundary of a free halfspace (space). The operator in the system of integral

13.2

δ

1 2 6.6

3 4 5 6 ϕ

0.0

π/2

π

3π/2

Fig. 5.6. Changes of the quantity δ on the contour of an opening under the inﬂuence of a shear wave in a halfspace (A = −1)

188

5 Scattering of a Shear Wave

δ

15.0

1 2

7.5

3 4 5 6

ϕ 0.0

π/2

π

3π/2

Fig. 5.7. Changes of quantity δ on the contour of an opening under the inﬂuence of a shear wave in a halfspace (A = 1)

(5.4) remains valid and the right-hand sides are determined, using formulas (4.60) and boundary conditions (5.2), as follows N1 (ζ0 ) =

N2 (ζ0 ) =

1−A (1) cos (ψ0 − α∗0 ) {γP0 H 1 (γr0∗ ) − 2 ) 8cE (1 + k 44 15 e15 Q0 2i (1) ∗ − ε γH1 (γr0 ) + ∗ , 11 πr0

1−A ie15 γ (1) ∗ H (γr0∗ ) − sin (ψ − α ) × P0 E 0 0 ε 2 ) 1 4 11 c44 (1 + k15 −Q0

2 iγk15 2 (1) H1 (γr0∗ ) − ∗ 2 1 + k15 πr0

,

(5.7)

r0∗ = |ζ0 − x10 | , α∗0 = arg (ζ0 − x10 ) . where the parameter A may take the values 0 and −1. Figures 5.8 and 5.9 demonstrate the results obtained by the numerical solution of integral (5.4) with right part (5.7) for the case of space (A = 0) with an elliptic cavity under the inﬂuence of charges and shear forces. Therein it was assumed that the center of the opening is at h/R1 = 2 distance from the line of the source action. Curves 1 and 2 refer to relative tangential stress δ = |T /Λ| at contour point ϕ = 0 and values R2 /R1 = 0.5 and 1, respectively; Λ = P0 , if P0 = 0, Q0 = 0 and Λ = Q0 cE 44 /c15 if

5.1 A Space and a Half-Space with Tunnel Openings

189

δ

0.54

2

0.27 1

γ *R

0.00 0

4

8

Fig. 5.8. Changes of the quantity δ at the point ϕ = π on the contour of an elliptic cavity, as a function of γ ∗ R in a space under the inﬂuence of electric charges

P0 = 0, Q0 = 0. The dashed lines in Fig. 5.9 correspond to the piezopassive condition (e15 = 0). The graphs of the quantity δ for a halfspace for the same values of parameters and in the same correspondence are presented in Figs. 5.10 and 5.11. Comparing Figs. 5.9 and 5.11, it follows that the inﬂuence of the eﬀect of interaction of the coupled ﬁelds with the concentration of stresses is more substantial in case of a halfspace than in a full space.

δ

0.54

0.43 2 0.32 1 2

1

0.21

γ *R

0.10 0

2

4

6

8

Fig. 5.9. Changes of the quantity δ at the point ϕ = π on the contour of an elliptic cavity, as a function of γ ∗ R in a space under the inﬂuence of shear forces

190

5 Scattering of a Shear Wave

δ

2.2

2

1 1.1

0.0

γ *R 0

4

8

Fig. 5.10. Changes of the quantity δ at the point ϕ = π on the contour of an elliptic cavity, as a function of γ ∗ R, in a halfspace under the inﬂuence of electric charges (A = −1) δ

1.60

1.25 1

2

1

0.90

0.55 2

γ*R

0.20 0

2

4

6

8

Fig. 5.11. Changes of the quantity δ at point ϕ = π on the contour of an elliptic cavity, as a function of γ ∗ R, in a halfspace under the inﬂuence of shear forces (A=–1)

5.2 Impulse Excitation of a Half-Space with Openings Let us consider the half-inﬁnite piezoceramic medium −∞ < x1 < ∞, 0 ≤ x2 < ∞, −∞ < x3 < ∞ in the Cartesian sytem of coordinates Ox1 x2 x3 , which is weakened by tunnel openings Γm (m = 1, 2, . . . , n) with generators parallel to x3 - axis. Let on line x1 = x10 , x2 = 0, −∞ < x3 < ∞ of the free boundary of a halfspace shear forces P (x1 , t) = P0 (t) δ (x1 − x10 ), or

5.2 Impulse Excitation of a Half-Space with Openings

191

electric charges Q (x1 , t) = Q0 (t) δ (x1 − x10 ), arbitrary changing with time, act where δ (x) is Dirac delta function; t is the time. Assume that the halfspace is bounded by vacuum; the surfaces of cavities Γm are free of mechanical loading and covered by grounded electrodes (the x3 - axis coincides with the direction of the electric ﬁelds’ force lines of the ceramics’ preliminarily polarization. The initial relations in quasistatic approximation are reduced to a system of two diﬀerential (4.26) and (4.28) for the displacement u3 and the function Φ. Applying the integral Fourier transform with respect to time we obtain the equations of Helmh¨ oltz and Laplace type (4.46) for the transformant functions u3 and Φ. In Fourier transformants U3 , F the boundary conditions on the contour Γm have the form of (5.2) which allows us to use the system of integral (5.4) with the right part (5.7) written for function transformant P0 (t) , Q0 (t). We will determine tangential stress σϑ on the surface of cavity Γm . Using (5.7) and because of the linear character of the problem and the validity of the superposition principle [196], proceeding from (5.5) we ﬁnd [19] σϑ (ζ0 ) =

2 Re π

∞

T (ζ0 , ω)e−iωt dω,

0

e15 T (ζ0 , ω) = T − 2 k15 ∗

T∗ =

p (ζ) g4 (ζ, ζ0 )ds,

ζ0 ∈ Γm ,

(5.8)

Γm

iγ (1 − A) ε ˆ ˆ 0 (ω) sin (ψ0 − α∗ ) H (1) (γ r∗ ) . P Q (ω) − e 0 15 11 0 0 1 2 ) ε 4 (1 + k15 11

The functions g4 (ζ, ζ0 ) , r0∗ and α∗0 in (5.8) are deﬁned in (5.4), (5.7); P 0 (ω) , Q0 (ω) are the Fourier transforms of the functions P0 (t) and Q0 (t). As an example, let us consider a space from PZT-4 weakened by tunnel cavity of circular cross-section exposed to an impulse loading of trapezoidal form (Fig. 5.28). The spectral function of the impulse has form of (4.73). Figures 5.12 and 5.13 illustrate the change λ = σϑ R/Λ of the opening on the contour for various values of the dimensionless time t∗ = c∗ th−1 under the action of the shear forces and electric charges, respectively. Curves 1, 2, . . . , 6 are constructed for the values of dimensionless time t∗ = 1.2, 1.5, 2.3, 10.3, 10.8 and 11.5 at T ∗ = 10, d∗1 = 1, d∗2 = 8, σ1∗ = c∗ σ1 h−1 N/(sm), h−1 = 1N/(s · M ), σ2∗ = 1cal/s · m, h/R = 4 (R is the opening radius, h is the distance from the center of the opening to the line of the source action). Here, Λ1 = σ1 if p (t) = 0, q (t) = 0 and Λ = σ2 cE 44 /e15 , if p0 (t) = 0, q0 (t) = 0. For comparison purposes the behaviour λ in the case of piezopassive medium is also shown (dashed lines).

192

5 Scattering of a Shear Wave λ

0.12

3 3 2

2 4

1 0.00

5 6

ϕ –0.12 π

0

2π

Fig. 5.12. Changes of the quantity λ on the contour of an opening for various values t∗ under the impulse inﬂuence of shear forces, in a space

As it follows from the presented results the redistribution of stress σϑ on the contour of the cavity occurs under a dynamic loading. The inﬂuence of the connected mechanical and electric ﬁelds on the surface of the cavity in a piezoceramic medium can be explained by the existence of Guliaev-Bluestein wave [140].

λ

0.06

1

4 2

0.00

6

5 3 ϕ

–0.06 0

π

2π

Fig. 5.13. Changes of the quantity λ on the contour of an opening for various values t∗ under the impulse inﬂuence of electric charges, in a space

5.3 Stress Concentration in a Layer with Openings

193

5.3 Stress Concentration in a Layer with Openings Consider a piezoceramic layer (0 ≤ x1 ≤ a, −∞ ≤ x2 ≤ ∞, −∞ ≤ x3 ≤ ∞) in the Cartesian system of coordinates x1 , x2 , x3 containing tunnel cavities Γm (m = 1, 2, . . . , n) along the x3 -axis. On the surface of cavities which are considered to change harmonically with time, a shear loading Zn = Re Ze−iωt , independent of x3 = coordinate, acts and a reﬂection of a plane shear wave may occur at inﬁnity: ω u03 = Re U30 e−iωt , U30 = τ e−iγx2 , γ = , c∗

(5.9)

where the wave velocity of shear c∗ is deﬁned in (5.1). Assume that the bases of the layer are free from forces and bounded by vacuum, while the surfaces of cavities Γm are electroded and grounded. The usual form of these conditions is displayed in (4.74) and (5.2). For the curvatures of contours Γm and the amplitudes Z we impose the same, as in Sect. 5.1, assumptions. The stated boundary problem in a quasistatic approximation is described by (4.46). To reduce it to integral equations let us present the sought-for functions U3 and F in form [145]

(0) U3 (x1 , x2 ) = U3 + p (ζ)G (ζ, z) ds,

F (x1 , x2 ) =

Γ

f (ζ)E (ζ, z) ds,

(5.10)

Γ

z = x1 + ix2 ∈ Ω, ζ = ξ1 + iξ2 ∈ Γ = ∪Γm . where, the function p (ζ) , f (ζ) are to be determined, ds is the arc- element of the contour Γ and Ω is the area occupied by the body. For a piezoceramic layer Green’s functions G and F are deﬁned in (4.81)–(4.83). Thus, the integral representations of solutions (5.10) automatically satisfy the mechanical and electric boundary conditions on the bases of the layer and also the conditions of radiation and damping at inﬁnity. Substituting the corresponding derivatives at z → ζ0 ∈ Γm (m = 1, 2, . . . , n) in the boundary conditions (5.2) we get the following system of singular integral equations for the determination of p (ζ) and f (ζ)

p (ζ0 ) + p (ζ)g1 (ζ, ζ0 ) ds + f (ζ) g2 (ζ, ζ0 )ds = N1 (ζ0 ) , Γ

Γ

f (ζ)g3 (ζ, ζ0 ) ds +

f (ζ0 ) + Γ

p (ζ) g4 (ζ, ζ0 )ds = N2 (ζ0 ) , Γ

194

5 Scattering of a Shear Wave

1 π (ζ0 − ζ) Re eiψ0 ctg + P1 eiψ0 + P2 e−iψ0 , 2a 2a e15 Reg Img, g3 (ζ, ζ0 ) = g2 (ζ, ζ0 ) = , E 2 2a 2ac44 (1 + k15 ) i ik 2 cE π (ζ0 − ζ) g4 (ζ, ζ0 ) = 15 44 Im eiψ0 ctg + P1 eiψ0 − P2 e−iψ0 , e15 2a 2a π ζ0 + ζ¯ π (ζ0 − ζ) g = eiψ0 ctg − ctg , 2a 2a

g1 (ζ, ζ0 ) =

A0 = B0 =

∞ k=1 ∞

β1k αk cos αk ξ1 sin αk ξ10 , β0k sign (ξ20 − ξ2 ) cos αk ξ1 cos αk ξ10 ,

k=1

1 −αk |ξ2 −ξ20 | 1 e − m e−λk |ξ2 −ξ20 | , m αk λk 1 1 P1 = P + S − (A0 − iB0 ) , P2 = P¯ − S − (A0 + iB0 ) , a a π ζ¯ + ζ0 1 1 ctg , S= sign (ξ2 − ξ20 ) 1 − eiγ|ξ2 −ξ20 | , P = 4a 2a 2ia 2Z (ζ0 ) N1 (ζ0 ) = E + 2iγτ e−iγξ20 sin ψ0 , 2 ) c44 (1 + k15 2iγτ e15 −iγξ20 N2 (ζ0 ) = e cos ψ0 , ε11 βmk =

(5.11)

ψ0 = ψ (ζ0 ) , ζ0 = ξ10 + iξ20 ∈ Γm (m = 1, 2, ..., n) . Here g2 (ζ, ζ0 ) , g4 (ζ, ζ0 ) are singular kernels (of Hilbert type); the functions g1 (ζ, ζ0 ) , g3 (ζ, ζ0 ) may posses not more than one weak singularity. If we set e15 = 0 into the system (5.11) the equation with “density” p (ζ) corresponds to a piezopassive piecewise-homogeneous layer giving us the possibility to investigate the inﬂuence of the piezoelectric eﬀect on the concentration of stresses. The calculation of tangential stress σϑ = Re T e−iωt with the use of formula (5.5) reads ⎡ ⎤

e15 ⎣ p (ζ) g4 (ζ, ζ0 ) ds − N2 (ζ0 )⎦ , (5.12) T (ζ0 ) = 2 k15 Γ

where the functions g4 (ζ, ζ0 ) and N2 (ζ0 ) are determined in (5.11).

5.3 Stress Concentration in a Layer with Openings

195

δ

3.4

1

2.7

2.0 2 1.3

3 γ*a

0.6 0.0

2.5

5.0

7.5

10.0

0 Fig. 5.14. Changes of δ = |T /S23 | at the point of contour ϕ = π of a symmetrically positioned elliptic opening in a layer as a function of γ ∗ α under the inﬂuence of a shear wave

0 Figure 5.14 illustrates the changes of δ = T /S23 at the point of contour ϕ = π of the elliptic opening with a center, located in the middle of a layer from ceramics PZT-4, with respect to γ ∗ a for R1 /a = 0.2, R2 /a = 0.1, 0.2 and 0.3 (curves 1, 2 and 3, respectively) under the action of the shear wave. Calculations were carried out by applying (5.12). Analogous results for the case of an opening shifted from the axis of the layer symmetry at distance of 0.1a to the left are given in Fig. 5.15.

4.0

δ

3.3

1

2.6 2

1.9

3 1.2 γ*a 0.5 0.0

1.6

3.2

4.8

6.4

8.0

Fig. 5.15. Changes of δ at the point of contour ϕ = π of a α symmetric elliptic opening as a function of γ ∗ α under the inﬂuence of a shear wave

196

5 Scattering of a Shear Wave 2.4

δ

1 6 5

2 3

1.2

4

ϕ 0.0

π/2

π

3π/2

Fig. 5.16. Changes of δ on the contour of a symmetrically positioned opening in a layer, as a function of γ ∗ α, for various values of parameter R2 /α under the inﬂuence of a shear wave

Changes of δ on the contour of the symmetrically located openings are represented in Fig. 5.16. The curve with number k corresponds to parameters R2 /a = 0, 1 + 0.05 (k − 1), γ ∗ a = 5.

5.4 A Half layer with Openings Applying the obtained in Sect. 4.8 Green’s function for the piezoceramic halflayer (0 ≤ x1 ≤ a, 0 < x2 < ∞, −∞ < x3 < ∞) we may in the same way construct the algorithm for the investigation of the diﬀraction of a shear wave on tunnel openings in a half-layer. Assume that the sidewise cases of the half-layer are free of forces and are bounded by vacuum and on the boundary x2 = 0 either edge conditions (4.45) (lack of forces, contact with vacuum), or (4.44) (rigid restraint, the boundary covered by electrodes and grounded) hold. In this case the integral representations of solutions (5.10) are somewhat generalized reading [148]

(1) U3 (x1 , x2 ) = U30 − AU3 + p(ζ)G∗ (ζ, z)ds,

F (x1 , x2 ) =

Γ ∗

f (ζ)E (ζ, z)ds, Γ

z = x1 + ix2 ∈ Ω, ζ = ξ1 + iξ2 ∈ Γ = ∪Γm

(5.13)

5.4 A Half layer with Openings

197

(1)

Here the term u3 = τ exp(ijx2 ) corresponds to shear waves reﬂected from the boundary of a half-layer x2 = 0; the expressions for functions G∗ and E ∗ are represented in (4.93). The case of A = −1 corresponds to the free, bounded with vacuum, half-layer while the case A = 1 to the ﬁxed and covered with grounded electrodes along boundary x2 = 0 half-layer. Using (5.13) and boundary conditions (5.2) we get the system of singular integral equations of (5.11) type, where we should use the following relations π(ζ0 + ζ) π(ζ0 − ζ) π(ζ0 + ζ) π(ζ0 − ζ) iψ0 − ctg + A ctg − ctg ctg g=e 2a 2a 2a 2a 1 π(ζ0 + ζ) π(ζ − ζ0 ) π(ζ0 + ζ) P = − A ctg − ctg ctg (5.14) 4a 2a 2a 2a 1 sign(ξ2 − ξ20 ) 1 − eiγ|ξ2 −ξ20 | + A 1 − eiγ(ξ2 −ξ20 ) , S= 2ia ∞ − + A0 = (β1k − Aβ1k )ak cos ak ξ1 cos ak ξ10 B0 =

k=1 ∞ k=1

− + β0k cos ak ξ1 cos ak ξ10 sign(ξ20 − ξ2 ) − Aβ0k

1 −ak |ξ2 ±ξ20 | 1 e − m e−λk |ξ2 ±ξ20 | am λ k k 2Z(ζ0 ) + 2iγτ sin ψ0 (e−iγξ20 + Aeiγξ20 ), N1 (ζ0 ) = E 2 ) c44 (1 + k15 2iγτ e15 N2 (ζ0 ) = cos ψ0 (e−iγξ20 + Aeiγξ20 ) ε ± βmk =

11

δ

8.4

6.3

1 2

4.2

3

2.1

1

2

3

γ*a 0.0 0

2

4

6

8

Fig. 5.17. Changes of δ at point ϕ = π of the contour of an elliptic cavity as a function of γ ∗ α under the inﬂuence of a shear wave (A = −1)

198

5 Scattering of a Shear Wave δ

6.8

1 5.1 2

//////////////////

3.4 3 1.7

γ*a 0.0 0

2

4

6

8

Fig. 5.18. Changes of δ at point ϕ = π of the contour of an elliptic cavity as a function of γ ∗ α under the inﬂuence of a shear wave (A = 1)

Equation (5.12) are still valid for determination of tangential stress σθ , but now the functions g4 (ζ, ζ0 ) and N2 (ζ, ζ0 ) should be calculated with the help of equalities (5.11) and (5.14). The calculations were carried out for a case of a half-layer with an elliptic opening. Figs. 5.17 and 5.18 show the behavior of δ at the point ϕ = π of contour as a function of γ ∗ α at radiation of the shear wave for the values of parameters A = −1 and 1, respectively. The solid lines δ

4.6

1 2 3

2.3

4 5

ϕ 0.0 0

π

2π

Fig. 5.19. Behaviour of quantity δ on the contour of an elliptic opening in halﬂayer (A = −1)

5.5 A Space and a Halfspace with Cylindrical Inclusions

199

δ

1.6

5 4

0.8

3 2 ϕ

1 0.0

π

0

2π

Fig. 5.20. Behaviour of quantity δ on the contour of an elliptic opening in halﬂayer (A = 1)

correspond to the opening shifted from the axis of symmetry at distance 0.1α to the left; the dashed lines to the symmetrically positioned opening. Curves 1, 2 and 3 correspond to R1 /a = 0.2, h/a = 0.5, R2 /a = 0.1, 0.2 and 0.3. Changes of δ on the contour of a symmetrically positioned opening at A = −1 and 1 are shown in Figs. 5.19 and 5.20, respectively. The curve with number k is constructed for γ ∗ α = 3, h/α = 0.7, R2 /a = 0.1 + 0.06(k − 1).

5.5 A Space and a Halfspace with Cylindrical Inclusions. Integrodiﬀerential Equations of a Boundary Problem Consider a half-inﬁnite x2 ≥ 0 medium in the Cartesian system of coordinates Ox1 x2 x3 containing heterogeneous cylindrical inclusions (areas Ωj ) continuously connected with the matrix along contour Cj (j = 1, 2, . . . , k) with the generators parallel to x3 -axis (see Fig. 5.21). Let us assume that the material

β Cj Ω

n

ψ

X2

O

X1

C1

Fig. 5.21. The scheme of a halfspace with cylindrical inclusions

200

5 Scattering of a Shear Wave

of the matrix and the inclusions is a piezoelectric of a hexagonal symmetry with the symmetry axis coinciding with x3 -axis. A plane monochromatic shear wave is reﬂected from inﬁnity under angle β to axis Ox1 , and the component (0.0) of shear vector u3 and electric potential φ0 are (0,0) (0,0) (0,0) u3 = Re U3 e−iωt , U3 = τ e−i(α1 x1 +α2 x2 ) , (5.15) τ e15 φ0 = Re Φ0 e−iωt , Φ0 = ε e−i(α1 x1 +α2 x2 ) , 11 where αi is determined in (5.1), when τ = const. It is assumed that the boundary of the halfspace is either ﬁxed and covered with grounded electrodes (u3 = 0, E1 = 0) or free from forces and conjugated with vacuum (τ23 = 0, D2 = 0). On the surfaces of conjugation of the matrix (area Ω) with inclusions it is necessary to require the fulﬁllment of conditions of continuity of the displacement and stress vectors at crossing across Cj . The electric conditions should be stated as conditions of conjugation on the boundary of two dielectrics (Dn+ = Dn− , Es+ = Es− ). Assume that the curves of contour Cj satisfy H¨older’s condition and besides (Ci ∩ Cj = Ø (i, j = 1, 2, . . . , k)). In a quasistatic approximation the initial relations are reduced to the system diﬀerential (4.46). The amplitudes of stresses and electric quantities are expressed by functions U3 and F calculated in (4.25), (4.29) The index j is assigned to all the quantities referring to the j-th inclusion. Using (4.29) the conditions of coupling read 2 + E(j) (j) (j) − − 2 − ie Γ = c 1 + k Λ+ 1 + k Λ cE 15 44 15 0 0 44 15 j − ie15 Γj , (j)

U3 − U3

= 0, −

ie15 ε 11

+ Λ− 0 − Γ0 = −

(j)

ie15

ε(j)

11

+ Λ− j − Γj ,

ε(j)

− ε11 Γ− 0 =11 Γj , ± where the diﬀerential operators Λ± m and Γm are determined by (m) (m) ∂ U ∂ U iψ0 3 3 ± e−iψ0 , ζ0 = ξ10 + iξ20 , Λ± m = e ∂ ζ0 ∂ ζ¯0

(m) (m) iψ0 ∂ F −iψ0 ∂ F , ζ¯0 = ξ10 − iξ20 , = e ± e Γ± m ∂ ζ0 ∂ ζ¯0 (0)

U3

= U3 , F (0) = F (m = 0, 1, ..., k) .

(5.16)

5.5 A Space and a Halfspace with Cylindrical Inclusions (j)

(j)

201

(j)

In (5.16) by quantities U3 , ∂U3 /∂ζ0 , ∂U3 /∂ ζ¯0 , ∂F (j) /∂ζ0 and ∂F (j) / ∂ ζ¯0 are considered their limiting values at z = x1 + ix2 → ζ0 ∈ Cj where the transition takes place from the body area to the contours Ωj , Ψ0 is the angle between the positive normal to the inclusion contour and axis Ox1 at point ζ0 . The total wave ﬁeld of the displacement in a halfspace with inclusions is summed by the falling and reﬂected from the boundary of a halfspace wave and also the ﬁeld scattered by heterogeneities. According to it let us write down the integral representations of the wanted functions as [20]

∂ G0 (ζ, z) ∂ G0 (ζ, z) ¯ (0,0) (0,1) dζ − U3 (z) = U3 − AU3 + p (ζ) d ζ , z ∈ Ω, ∂ζ ∂ ζ¯ C

(j) U3

(z) =

(j,0) (j,1) U3 −AU3

pj (ζ)

+ C

F (z) =

F (j) (z) =

1 π ε11 1

(1)

∂ Gj (ζ, z) ∂ Gj (ζ, z) ¯ dζ − dζ , z ∈ Ωj , ∂ζ ∂ ζ¯ (5.17)

f (ζ) E (ζ, z) ds, z ∈ Ω, C

f (ζ) E (ζ, z) ds, z ∈ Ωj ,

(j)

π 11

C (1)

Gm (ζ, z) = H0 (γm r) − AH0 (γm r1 ) , E (ζ, z) = nr + A nr1 , (j,k)

U3

(j) k (j) = τ exp −i α1 x1 + (−1) α2 x2 ,

(j) (j) α1 = γj cos β, α2 = γj sin β, r = |ζ − z| , r1 = ¯ ζ − z , γ0 = γ, ζ ∈ C = ∪Cj (j = 1, 2, ..., k) . Here p, pj and f are “densities” to be determined; ds is the arc-length (1) element of contour C; Hν (x) is the Hankel function of the ﬁrst kind and of ν-th order. The parameter A identiﬁes the type of the boundary conditions; at A = −1 we have a free bounded by vacuum halfspace; at A = 1 we have a ﬁxed covered with grounded electrodes halfspace. The value A = 0 corresponds to the piezoelectric space with inclusions. The integral representations (5.17) satisfy (4.46) in the corresponding areas Ω and Ωj , mechanical and electric conditions of the mentioned types on the boundary of halfspace x2 = 0 and also the conditions of reﬂection. Writing functions F and F (j) in the form of (5.17) gives the possibility to automatically satisfy the last condition in (5.16) (continuation of Dn at crossing Cj ).

202

5 Scattering of a Shear Wave

Substituting the limiting values of functions (5.17) and their derivatives into the conjugation conditions (5.16) we get a system of integrodiﬀerential equations of the second kind:

(j) (j) (j) G1 p (ζ) + G2 pj (ζ) + G3 p (ζ) + G4 pj (ζ) + G5 f (ζ) ds = N (ζ0 ), C

(j) G6 p (ζ) + G7 pj (ζ) ds = M (ζ0 ) , p (ζ0 ) + pj (ζ0 ) + C (j)

2e15 p (ζ0 ) + 2e15 λj pj (ζ0 ) + (1 + λj ) f (ζ0 ) +

{G8 p (ζ) +

(5.18)

C

(j) +G9 pj

(ζ) + G10 p (ζ) +

(j) G11 pj

(ζ) +

(j) G12 f

(ζ) ds = L (ζ0 ) ,

where

2 2 E 2 E(j) (j) (j) 2 c44 1 + k15 Img, G2 = c44 1 + k15 Img, π π −iψ0 eiψ0 2 e K20 − eiψ0 K10 , g = , G3 =cE 44 1 + k15 ζ − ζ0 iψ0 ε11 (j) E(j) 2 G4 =c44 1 + k15 e K 1j − e−iψ0 K2j , λj = ε(j) , 11 (j) e15 e15 eiψ0 (j) G5 = − ε , π −1 Img0 , g0 = g + A ¯ ε(j) 11 ζ − ζ0 11 (1) (1) G6 =0.5iγ H1 (γ r0 ) cos (ψ − α0 ) − AH1 (γ r10 ) cos (ψ + α10 ) , (j) (1) (1) G7 =0.5iγj AH1 (γj r10 ) cos (ψ + α10 ) − H1 (γj r0 ) cos (ψ − α0 ) , G1 = −

2 2 (j) (j) e15 Reg, G9 = e15 λj Reg, π π = − ie15 eiψ0 K10 + e−iψ0 K20 , 1 (j) (j) =ie15 λj eiψ0 K1j + e−iψ0 K2j , G12 = (λj − 1) Reg0 , π iγ 2 (1) = m eiψ AH0 (γm r10 ) + H2 (γm r0 ) e−2iα0 − 4 (1) (1) −e−iψ H0 (γm r0 ) + AH2 (γm r10 ) e−2iα10 , iγ 2 ! (1) (1) = m eiψ AH2 (γm r10 ) e2iα10 + H0 (γm r0 ) − 4 (1) −e−iψ H2 (γm r0 ) e2iα0 + AH0 (γm r10 ) ,

G8 = − G10 (j)

G11

K1m

K2m

5.5 A Space and a Halfspace with Cylindrical Inclusions

2 E(j) (j) 2 N (ζ0 ) = c44 1 + k15 dj (ζ0 ) − cE 44 1 + k15 d0 (ζ0 ) , (j) (j) M (ζ0 ) = 0.5 W0 − AW1 − W0 + AW1 ,

203

(j)

L (ζ0 ) = e15 λj ej (ζ0 ) − e15 e0 (ζ0 ) , + − dm (ζ0 ) = −iγm Bm cos (ψ0 − β) − ABm cos (ψ0 + β) , + − sin (ψ0 − β) − ABm sin (ψ0 + β) , em (ζ0 ) = iγm Bm 4i dpj dpj (1) , pj (ζ0 ) = + H2 (x) , pj (ζ) = , H2 (x) = 2 πx ds ds0 (m) (m) ± Bm = τ exp −i α1 ξ10 ± α2 ξ20 , ψ = ψ (ζ) , ψ0 = ψ (ζ0 ) ,

r0 = |ζ0 − ζ| , r10 = ζ0 − ζ¯ , α 0 = arg (ζ0 − ζ) , α10 = arg ζ0 − ζ¯ , s0 = s (ζ0 ) , ζ = ξ1 + iξ2 ∈ C, ζ0 ∈ Cj (j = 1, 2, ..., k) . (j)

(j)

In the system (5.18) the kernels G1 , G2 , G5 are singular, while the other kernels, due to the assumptions referring to contour Cj , may have not more than weak singularity. (j) It should be mentioned that at e15 = e15 = 0 the system (5.18) is divided into the independent equations with respect to functions pm (ζ) and f (ζ). In this case the ﬁrst two equations (with “densities” pm (ζ)) correspond to a piezopassive composition. To investigate the stress concentration in a halfspace with inclusions let us calculate the stresses σn = σ13 cos ψ0 + σ23 sin ψ0 and σs = σ23 cos ψ0 − σ13 sin ψ0 at the contour point ζ0 ∈ C. Using equalities (5.17), (4.29) the expressions for the amplitude of tangential stresses read

Tn (ζ0 ) = [p (ζ) G1 (ζ, ζ0 ) + p (ζ) G3 (ζ, ζ0 )] ds+ C

e15 2 1 + k d (ζ ) − f (ζ)Img0 ds, + cE 0 0 44 15 π ε11 C ⎧

⎨ 2 2 p (ζ) Regds− Ts− (ζ0 ) = cE 2p (ζ0 ) − 44 1 + k15 ⎩ π C ⎫

⎬ iψ0 −i p (ζ) e K10 + e−iψ0 K20 ds + e0 (ζ0 ) + ⎭ C ⎧ ⎫

⎬ 1 e15 ⎨ f (ζ) Reg0 ds , + ε f (ζ0 ) − ⎭ 11 ⎩ π C

204

5 Scattering of a Shear Wave

⎧

2 ⎨ 2 E(j) (j) + Ts (ζ0 ) = −c44 pj (ζ) Regds+ 1 + k15 2p (ζ0 ) + ⎩ j π C ⎫

⎬ iψ0 +i pj (ζ) e K1j + e−iψ0 K2j ds − ej (ζ0 ) − ⎭ C ⎧ ⎫

(j) ⎬ 1 e15 ⎨ f (ζ) Reg0 ds . f (ζ0 ) + (5.19) − ε(j) ⎩ ⎭ π 11

C

The functions Gm , Kim , dm , em , g, g0 are determined from (5.18), the “plus” and “minus” signs show the limiting values of stresses Ts from areas of j-th inclusions and matrix, respectively. As an example let us consider a halfspace with inclusions of elliptic crosssection with parametric equations ξ1 = R1 cos ϕ, ξ2 = R2 sin ϕ + h (0 ≤ ϕ ≤ 2π) .

(5.20)

The material of the inclusions and of the matrix corresponded to piezoceramics PZT-4 and BaT iO3 . Using (5.20) the integrodiﬀerential (5.18) can be reduced to a system of linear algebraic equations using the scheme of the method of quadrature (see: Appendix B, B.3). point ϕ = π of Figure 5.22 shows the graphs of λ = |Tn | R/ cE 44 |τ | at √ the contour of an elliptic inclusion as function γ ∗ R = R γγ1 η for values β = π/2, R2 /R1 = 2 and 1 (curves 1 and 2, respectively). Figures 5.23 and 5.24 illustrate the behaviour of μ− = |Ts− | R/ cE 44 |τ | and λ = |Tn | R/ cE 44 |τ | on the inclusion contour in space (A = 0). Lines 1, 1.40

λ

1.12 + – 0.84

0.56 2

1

0.28 γ*R

0.00 0

1

2

3

4

5

Fig. 5.22. Changes of quantity λ at the point ϕ = π of the contour of an elliptic inclusion as a function of γ ∗ R during the radiation of a shear wave in a space

5.5 A Space and a Halfspace with Cylindrical Inclusions

205

μ–

2.4

3

3

2 2 1.2 1 1 α

0.0 π

0

2π

Fig. 5.23. Behaviour of μ− on the contour of an inclusion in a halfspace (γ ∗ R = 2)

2 and 3 are constructed(for β = π/2, γ ∗ R = 2, R2 /R1 = 0.5, 1 and 1.5, 2 (1) 2 respectively. Here, η = (1 + k15 ) 1 + k15 , R = (R1 + R2 ) /2. The dashed lines correspond to the piezopassive composition. Figures 5.25 and 5.26 demonstrate the change of λ on the inclusion contour in a halfspace as a function of the vectorial angle α for (A = −1) and (A = 1) respectively. Curves 1, 2 and 3 are constructed for the values of parameters γ ∗ R = 2, β = π/2, R2 /R1 = 0.5, 1 and 1.5, respectively. The distance from the boundary of the halfspace to the center of the inclusion is assumed equal to h = 2.5R1 (Fig. 5.25) and h = 2R1 (Fig. 5.26). λ

2.0

1 2 1

3 2 3

1.1

α

0.2 0

π

2π

Fig. 5.24. The behaviour of λ on the contour of an inclusion in a halfspace (γ ∗ R = 2)

206

5 Scattering of a Shear Wave λ

3.8

3

1

2 1.9 1 3 2

α

0.0 π

0

2π

Fig. 5.25. Changes of λ on the contour of an inclusion in a halfspace (A = −1)

From the results it follows that the inﬂuence of coupling of the mechanical and electric ﬁelds on the stress state is considerably strong in the vicinity of extremal values of tangential stresses on the interphase of media. This circumstance should be taken into account for the calculation of the strength of the glue layer on the boundary of “fibre-matrix”, and also for the estimation of the appearance interphase cracks. Not taking into account a piezoeﬀect may bring to (in some range of changes of vector angle α) a considerable decrease of calculated stresses σn and σs in comparison with real ones. The characteristic λ

3.8

1

1

3

1.9

3

2 2 α

0.0 0

π

2π

Fig. 5.26. Changes of λ on the contour of an inclusion in a halfspace (A = 1)

5.6 Interaction of Openings and Cracks in a Space

207

curves of the lines in Fig. 5.22 correspond to the release of the energy from the inclusion to the matrix.

5.6 Interaction of Openings and Cracks in a Space In the Cartesian coordinate system O, x1 , x2 , x3 , consider a piezoceramic space weakened by a tunnel in the direction of x3 -axis, Lj (j = 1, 2, . . . , k) cracks and openings Cm (m = 1, 2, . . . , n). A monochrome plane shear wave radiates from inﬁnity, at an angleβ with the x1 -axis, with a displacement com(0) (0) ponent u3 = Re U3 e−iωt (Fig. 5.27). We assume that the surfaces of the cavities and grounded, while stresses of longitudinal shear are electroded Zn = Re Ze−iωt may be applied (independent of the x3 -coordinate). On the edges of the cracks may also act self-balanced shear forces X3n = Re X3 e−iωt harmonic with time. Assume that the curvature of contours Cm and Lj , and also the amplitudes of forces Z (x1 , x2 ) and X3 (x1 , x2 ) are the functions of H¨ older’s class and besides ∩Lj = Ø, Cm ∩ Lj = Ø. The total wave ﬁeld of the displacement satisfying Helmh¨ oltz (4.46) may be represented in the form (0) u3 = Re U3 e−iωt , U3 = U3 + U3∗ (5.21) Here U3∗ is the displacement conditioned by the presence of tunnel hetero(0) geneities, while the quantity U3 is deﬁned in (4.30). The electric boundary conditions on the surface of the openings and cracks read φ = 0 (Es = −∂ φ/∂ s = 0) on Cm (m = 1, 2, . . . , n) ,

(5.22)

Es+

(5.23)

=

Es− ,

Dn+

=

Dn−

on Lj (j = 1, 2, . . . , k) .

Here φ is the potential of an electric ﬁeld, Es and Dn are tangential components of the vector of electric strength and the normal component of the vector of electric induction, s is the arc-length abscissa.

X2 –

bj + L1

ψ

n

β

Lj aj

O Cm

ψ1

X1

Fig. 5.27. The scheme of a shear wave diﬀraction on cracks and opening in a space

208

5 Scattering of a Shear Wave

Based on expressions (4.25), (4.29) for the components of an electroelastic ﬁeld corresponding to the state of an antiplane deformation let us write down the sought-for functions U3 and E as a superposition of the integral representations of type (5.3) and (4.48)

U3 (x1 , x2 ) =

(0) U3

F (x1 , x2 ) =

e15 π ε11

(1)

∂ H0 (γ r∗ ) ds, ∂ nζ C L ⎫ ⎧

⎬ ⎨ 1 dU 3 (5.24)

nr∗ ds + f (ζ ∗ ) nr1∗ ds , ⎭ ⎩2 ds

+

p (ζ

L

∗

(1) )H0

(γ r1∗ ) ds

1 − 4

[U3 ]

C

r∗ = |ζ − z| , r1∗ = |ζ ∗ − z| , z = x1 + ix2 , ζ ∈ L = ∪Lj , ζ ∗ ∈ C = ∪Cm . (1)

Here Hn (x) is the Hankel’s function of ﬁrst kind and of n-th order, the square brackets denote a jump of the corresponding quantity on L, ds is the element of a contour arc over which the integration is carried out. The integral representations of solutions (5.24) are correct in the sense that they satisfy diﬀerential (4.46), provide the existence of displacement jump U3∗ on the cracks, the continuity of the strength vector through Lj , and also the automatic satisfaction of electric conditions (5.23). Appearing into (5.24) densities [U3 ] , p (ζ) and f (ζ ∗ ) should be determined using the mechanical boundary conditions on contours C and L, and also electrical conditions (5.22). The latter taking into account (4.29), may be represented as follows + iψ1 ∂ U3 + ∂ U3 E 2 −iψ1 +e c44 1 + k15 e ∂ ζ∗ ∂ ζ¯∗ + + ∂F ∂F iψ1 −iψ1 − ie15 e +e = Z, ∂ ζ∗ ∂ ζ¯∗ + + + + ∂ U3 ∂F ∂F ie15 iψ1 −iψ1 ∂ U3 iψ1 −iψ1 −e +e = 0, e +e ε ∂ ζ∗ ∂ ζ∗ ∂ ζ¯∗ ∂ ζ¯∗ 11 (5.25) + + iψ ∂ U3 ∂ U3 2 cE e + e−iψ 44 1 + k15 ∂ζ ∂ ζ¯ + + ∂F ∂F iψ −iψ − ie15 e −e = X3 . ∂ζ ∂ ζ¯ Here the corresponding variables are calculated at their limiting values at z → ζ ∗ ∈ C and z → ζ ∈ L from the body area; the functions ψ = ψ (ζ) and ψ1 = ψ1 (ζ ∗ ) denote the angles between axes x1 and the normals to contour L and C, respectively. The second condition in (5.25) expresses the equality to zero of the tangential component of the vector of electric strength on the

5.6 Interaction of Openings and Cracks in a Space

209

outer electroded boundary of the cylinder. Due to the fact that representations (5.24) provide the continuity of the stress vector on the cracks it suﬃces to satisfy the mechanical boundary condition on one of the edges (for example, on the left one). Substituting the limiting values of function (5.24) in to boundary condition (5.25) we get a system of three integrodiﬀerential equations of the second kind

dU3 g1 (ζ, ζ0 ) + [U3 ] g2 (ζ, ζ0 ) ds+ ds L

+ {p (ζ ∗ ) g3 (ζ ∗ , ζ0 ) + f (ζ ∗ ) g4 (ζ ∗ , ζ0 )} ds = N1 (ζ0 ) , C

− p (ζ0∗ ) +

+

L

f (ζ0∗ ) + +

dU3 g5 (ζ, ζ0∗ ) + [U3 ] g6 (ζ, ζ0∗ ) ds+ ds

(5.26)

{p (ζ ∗ ) g7 (ζ ∗ , ζ0∗ ) + f (ζ ∗ ) g8 (ζ ∗ , ζ0∗ )} ds = N2 (ζ0 ) ,

C

L

dU3 g9 (ζ, ζ0∗ ) + [U3 ] g10 (ζ, ζ0∗ ) ds+ ds

{p (ζ ∗ ) g11 (ζ ∗ , ζ0∗ ) + f (ζ ∗ ) g12 (ζ ∗ , ζ0∗ )} ds = N3 (ζ0 ) ,

C

where the kernels gm (m = 1, 2, . . . , 12) and the right parts are determined by the expressions eiψ0 eiψ10 1 κ Im Im ∗ , g8 (ζ ∗ , ζ0∗ ) = , 2 ζ − ζ0 2πi ζ − ζ0∗ iπ 2 g2 (ζ, ζ0 ) = γ 2 1 + k15 [H2 (γ r0 ) cos (ψ + ψ0 − 2α0 ) 8

g1 (ζ, ζ0 ) =

(1)

−H0 (γ r0 ) cos (ψ − ψ0 ) , (1) 2 g3 (ζ ∗ , ζ0 ) = π 1 + k15 γ H1 (γ r1 ) cos (ψ0 − α1 ) , 2 g4 (ζ ∗ , ζ0 ) = −k15 Im

eiψ10 eiψ0 κ Im ∗ , g5 (ζ, ζ0∗ ) = , − ζ0 4πi ζ − ζ0∗

ζ∗

γ 2 (1) (1) H2 (γ r2 ) cos (ψ + ψ10 − 2α2 ) − H0 (γ r2 ) cos (ψ − ψ10 ) , 16 eiψ10 γ 1 g7 (ζ ∗ , ζ0∗ ) = − H1 (γ r3 ) cos (ψ10 − α3 ) + Re ∗ , 2i π ζ − ζ0∗

g6 (ζ, ζ0∗ ) = −

g9 (ζ, ζ0∗ ) = −

eiψ10 eiψ10 1 1 Re , g12 (ζ ∗ , ζ0∗ ) = − Re ∗ , ∗ 2π ζ − ζ0 π ζ − ζ0∗

210

5 Scattering of a Shear Wave

iγ 2 (1) (1) H2 (γ r2 ) sin (ψ + ψ10 − 2α2 ) + H0 (γ r2 ) sin (ψ − ψ10 ) , 8 eiψ10 2i , g11 (ζ ∗ , ζ0∗ ) = −γH1 (γ r3 ) sin (ψ10 − α3 ) + Im ∗ π ζ − ζ0∗ 2i 4i (1) (1) H1 (x) = + H1 (x) , H2 (x) = + H2 (x) , πx πx2 i(α1 ξ10 +α2 ξ20 ) π 2 e cos (ψ0 − β) , N1 (ζ0 ) = E X3 (ζ0 ) + iπγτ 1 + k15 c44 2 ∗ ∗ Z k15 γτ i(α1 ξ10 +α2 ξ20 ) e N2 (ζ0∗ ) = − E cos (ψ10 − β) , κ = − 2 , 2 2 1 + k15 2ic44 (1 + k15 ) g10 (ζ, ζ0∗ ) = −

∗

∗

N3 (ζ0∗ ) = −iγτ ei(α1 ξ10 +α2 ξ20 ) sin (ψ10 − β) , r = |ζ − ζ0 | , r1 = |ζ ∗ − ζ0 | , r2 = |ζ − ζ0∗ | , r3 = |ζ ∗ − ζ0∗ | ,

α = arg (ζ − ζ0 ) , α1 = arg (ζ ∗ − ζ0 ) , α2 = arg (ζ − ζ0∗ ) , α3 = arg (ζ ∗ − ζ0∗ ) , ψ = ψ (ζ) , ψ0 = ψ (ζ0 ) , ψ10 = ψ1 (ζ0∗ ) ;

∗ ∗ ζ = ξ1 + iξ2 , ζ0 = ξ10 + iξ20 ; ζ ∗ = ξ1∗ + iξ2∗ , ζ0∗ = ξ10 + iξ20 ; ∗ ∗ ζ, ζ0 ∈ L = ∪Lj , ζ , ζ0 ∈ C = ∪Cm .

To complete the algorithm it is necessary to augment the system (5.26) with the additional conditions

dU3 ds = 0 (j = 1, 2, . . . , k) , (5.27) ds Lj

The above conditions express the absence of displacement jumps U3 on the tips of the cracks. Here we should note that when k15 = 0 the two ﬁrst integrodiﬀerential conditions (5.26) correspond to a piezopassive (isotropic) space with defects. To determine the stress intensity factor let us introduce the parameterization of contour L dU3 ds Ω (δ) √ > 0, δ ∈ [−1, 1] . (5.28) , s (δ) = = ζ = ζ (δ) , 2 ds dδ s (δ) 1 − δ The asymptotic analysis of quantity ∂i U3 , ∂i F (i = 1, 2) given by (5.24) permits us to ﬁnd the main singular part of shear stress on their continuation beyond the tips of the cracks by applying formulas (4.29), (5.28) −iωt

Ω (±1) ds

0 E Re e τn = ±c44 . (5.29) , s (±1) = dδ δ=±1 2 2r∗ s (±1) Here the lower sign corresponds to tip a, the upper one to tip b, r∗ is the distance from the point to the tip. From (5.28) we obtain the following expression for the intensity stress −iω t √ Ω (±1) ± 0 E Re e . (5.30) KIII = im 2π r∗ τn = ±c44 r→0 2 s (±1)

5.6 Interaction of Openings and Cracks in a Space

211

To determine the concentration of stresses in a medium with cracks let us evaluate tangential stress τϑ = τ23 cos ψ − τ13 sin ψ on C. We have iψ10 ∂ U3 ∗ E 2 −iψ10 ∂ U3 T (ζ0 ) = ic44 1 + k15 e −e ∂ ζ0∗ ∂ ζ0∗ ∂F ∂F + e15 eiψ10 ∗ + e−iψ10 ∗ , (5.31) ∂ ζ0 ∂ ζ0 τϑ = Re T e−iωt , ψ10 = ψ1 (ζ0∗ ) , ζ0∗ ∈ C. In (5.31) the partial derivatives of the corresponding quantities are calculated at their limiting values at z → ζ0∗ of the medium area. By applying formula (5.24) we ﬁnd ⎫ ⎧

⎬ ⎨

2 [U3 ] g10 (ζ, ζ0∗ )ds+ p (ζ ∗ )g11 (ζ ∗ , ζ0∗ ) ds+ S (ζ0∗ ) T (ζ0∗ ) = cE 44 1 + k15 ⎭ ⎩ L C ⎫ ⎧

⎬ 2 ⎨

iψ10 iψ10 cE dU k e 1 e 3 ∗ ∗ − 44 15 ds − πf (ζ ) + f (ζ ) Re ds Re 0 π ⎩2 ds ζ − ζ0∗ ζ ∗ − ζ0∗ ⎭ L

C

(5.32) For quantity S (ζ0∗ ) we have the following cases: 1) S (ζ0∗ ) = 0 when shear forces ∗ ∗ act on the opening or cracks and 2) S (ζ0∗ ) = iγτ ei(α1 ξ10 +α2 ξ20 ) sin (ψ10 − β) when we have wave radiation. As an example consider a medium from ceramics PZT-4 weakened by an opening of an elliptic cross-section and rectangular crack. The parametric equations of contours C and L have, respectively, the following form Reζ ∗ = R1 cos ϕ, Imζ ∗ = R2 sin ϕ (0 ≤ ϕ < 2π) , Reζ = p1 δ + p0 , Imζ = h (−1 ≤ β ≤ 1) .

(5.33)

The solution of the system of integrodiﬀerential (5.26) together with (5.27) with the help of (5.28), (5.33) was obtained numerically using the method of quadratures (see Appendix 12.8, Par. B1, Par. B2). The stress intensity factor and the stress of a cavity contour were calculated by the formulas (5.30), (5.32). ) + * = Figures 5.28 5.29 show the changes of relative intensity factor KIII and E 0 c44 |Ω (1)| / 2S23 s (1) as a function of the normalized wave number 2 in the process of radiation of a shear wave (Z = X = 0, R γ ∗ R = γR 1 + k15 3 = 0.5 (R1 + R2 )). In Fig. 5.28 the curves 1 and 2 correspond to the parameter values β = π/2, R1 /R2 = 1, p1 /R1 = 1, p0 /R1 = 0, h/R1 = 0.6 and 0.4, respectively; in Fig. 5.29 for the same values and h/R1 = −0.6 and −0.4. The dashed line 1 satisﬁes the piezopassive piecewise-homogeneous medium

212

5 Scattering of a Shear Wave 2.4

2

1

1.2

1 γ*R

0.0 0

2

4

+ KIII

Fig. 5.28. Behaviour of < > as a function of parameter γ ∗ R for various positions of an opening and a crack in a space

(k ) 15±=*0). Assuming that we have already at hand the value of the quantity KIII we may deﬁne the corresponding stress intensity factor by formula √ ) ± * ± 0 KIII cos {ω t − arg Ω (±1)} . (5.34) = ± π S23 KIII 0 2 = τ γcE Here S23 44 1 + k15 is the modulus of the stress amplitude τ23 in the shear wave, 2 is the length of the crack. 1.8

1

2 0.9

0.0 0

2 + KIII

γ*R

4

Fig. 5.29. Behaviour of < > as a function of parameter γ ∗ R for various positions of an opening and a crack in a space

5.6 Interaction of Openings and Cracks in a Space

213

λ

2.6

1 2

1.3

1

γ *R 0.0 2

0

4

0 Fig. 5.30. Behaviour of relative shear stresses λ = |T /S23 | at the point of contour ϕ = π as function of γ ∗ R for various positions of an opening and a crack in a space

Figures shear stress

5.30 and 5.31 demonstrate the behavior of the relative 0 λ = T /S23 at the point of contour ϕ = π as the function γ ∗ R for the same parameters, using the same relations as the ones in Figs. 5.28 and 5.29. From the results we conclude that the parameters of rigidity and fracture depend signiﬁcantly on the frequency of the harmonic loading and the mutual location of the defects. For example, as it follows from Fig. 5.28, the quantity

λ

2.6

1

2

1.4

γ*R 0.2 0

2

4

0 Fig. 5.31. Behaviour of relative shear stress λ = |T /S23 | at the point of contour ϕ = π as function of γ ∗ R for various positions of an opening and a crack in a space

214

5 Scattering of a Shear Wave λ

3.2

1 1.6 2

ϕ

0.0 0

π

2π

Fig. 5.32. Changes of λ on the contour of an elliptic cavity with an inclusion crack under the inﬂuence of a shear wave (β = π/4)

) + * KIII may overcome its static analogue approximately 2.3 times (Curve 1). If the wave falls in such a way that crack is in the “shadow” of the opening * ) the + in the considered frequency range is (Fig. 5.29), the maximum value KIII smaller than in the situation, corresponding to Fig. 5.28. Figure 5.32 illustrates the changes of λ on the contour of an elliptic cavity in the vicinity of an inclusion under the inﬂuence of shear waves (β = π/4). Curves 1 and 2 satisfy values R1 /R2 = 2, p0 /R1 = 2.5, p1 /R1 = 1, h/R1 = 0 and γ ∗ R = 1 and 2, respectively.

Fig. 5.33. The contour lines of the modulus of the displacement amplitude in the area with an opening and a crack under the inﬂuence of shear forces Z = sin(2ϕ) on the opening

5.6 Interaction of Openings and Cracks in a Space

215

Fig. 5.34. The contour lines of the modulus of the displacement amplitude in the area with an opening and a crack under the inﬂuence of shear forces Z = sin(2ϕ) on the opening

The inﬂuence of the eﬀect of connection of mechanical and electric ﬁelds on the behaviour of the investigated quantities in some frequency ranges appears to be signiﬁcant (see Figs. 5.28 and 5.30).

Fig. 5.35. The contour lines of the modulus of the displacement amplitude in the area with an opening and a crack, under the inﬂuence of shear forces X3 = const, on the opening

216

5 Scattering of a Shear Wave

Figures 5.33 and 5.34 illustrate the contour lines of the displacement amplitude modulus in the area covering an opening and a crack of diﬀerent orientation when on the surface of the opening there act shear forces Z = sin (2ϕ) (R1 /R2 = 1, p1 /R1 = 1, p0 /R1 = 0, h/R1 = −4, γ ∗ R = 2). The analogous result for the same parameter values are given in Fig. 5.35 when the shear forces of constant intensity (X3 = const) act on the crack edges.

5.7 Fundamental Solution for a Composite Anisotropic Space In this section we consider a composite anisotropic space referring to Cartesian coordinates x1 , x2 , x3 and eﬀected by, the concentrated on line x1 = ξ1 , x2 = ξ2 > changing with time shear forces q = 0, −∞ < x3 < ∞ harmonically Re Qδ (x1 − ξ1 , x2 − ξ2 ) e−iωt of constant along axis x3 intensity (t is the time, ω is the circular frequency, δ (x, y) is Dirac-delta function). It is assumed that the materials of the composite space with respect to the elastic properties are orthotropic. In the given conditions in a composite space a steady wave process occurs, corresponding to the state of antiplane deformation. The system of equations of the problem includes the following relations [134]

(r)

σ23

(r)

∂ 2 u3 − δr1 q, ∂j = ∂/∂xj , ∂t2 (r) (r) (r) (r) (r) = c44 ∂2 u3 , σ13 = c55 ∂1 u3 (r = 1, 2)

(r)

(r)

∂1 σ13 + ∂2 σ23 = ρr

(5.35) (5.36)

Here (5.35) is the equation of movement, (5.36) are the equations of the medium state, cij are the moduli of the material elasticity; ρ is the material density, δrj is the Kronecker delta. Index “r” (r = 1, 2) for all the quantities referring to r-th half-space; x2 > 0 if r = 1 and x2 ≤ 0 if r = 2. On the boundary of interphase x2 = 0 it is necessary to require the performance of conditions of an ideal mechanical (1)

(2)

(1)

(2)

u3 = u3 , σ23 = σ23

(5.37)

From (5.35), (5.36) we obtain Helmh¨ oltz equations for the displacement amplitude in a composite space (1)

+ γ12 U3

(2)

+ γ22 U3

∇2 U3 ∇22 U3

(1) (2)

Q = − √ δ (x1 − ξ1 , η1 − χ) (x2 > 0) Δ1 = 0 (x2 ≤ 0)

(5.38)

5.7 Fundamental Solution for a Composite Anisotropic Space

217

∂2 ∂2 + 2 2 ∂x1 ∂ηr ( ω Δr (r) (r) −iωt (r) (r) u3 = Re U3 e , Δr = c44 c55 , γr = , cr = (r) cr ρr c44 √ Δr ηr = x2 Im μr , ζ = ξ2 Im μ1 > 0, μr = i (r) (r = 1, 2) c44 ∇2r =

Thus, the problem is reduced to the deﬁnition of the function from diﬀerential (5.38), conjugation (5.37) and also from the conditions at inﬁnity. To solve the problem let us apply integral Fourier transform to (5.38) 1 F (p) = √ 2π

∞ f (x1 )e

−ipx1

−∞

1 dx1 , f (x1 ) = √ 2π

∞

F (p)eipx1 dp

(5.39)

−∞

As a result we come to ordinary diﬀerential equations with respect to the spectral displacement functions ˆ (1) (1) d2 U 3 ˆ = − √ Q√ e−ipξ1 δ (η1 − χ) (x2 > 0) + γ12 − p2 U 3 2 dη1 2π Δ1 2 ˆ (2) (2) d U3 ˆ = 0 (x2 ≤ 0) + γ22 − p2 U 3 dη22

(5.40)

The general solutions of (5.40) providing the performance of radiation conditions [43] at inﬁnity may be represented as follows −ipξ1 ˆ (1) = Ae−λ1 η1 + √Qe √ U e−λ1 |η1 −ζ| (x2 > 0) 3 2 2π Δ1 λ1 ˆ (2) = Beλ2 η2 (x2 ≤ 0) U 3 −i γ 2 − p2 , γr > |p| λr = 2 r 2 (r = 1, 2) p − γr , γr < |p|

(5.41)

Constants A and B are determined from conditions (5.37) on the boundary of conjugation of media x2 = 0, which allowing for (5.36) in Fourier transformants have the following form ˆ (1) = U ˆ (2) U 3 3 (1)

c44 Im μ1

ˆ (1) ˆ (2) dU dU (2) 3 = c44 Im μ2 3 dη1 dη2

(5.42)

218

5 Scattering of a Shear Wave

Proceeding from (5.41), (5.42) we obtain the expressions for the spectral functions of the displacement amplitude −ipξ1 Qα (p) ˆ (1) = √Qe √ U e−λ1 |η1 −x1 | + √ √ e−ipξ1 e−λ1 (η1 +χ) (x2 > 0) 3 2 2π Δ1 λ1 2 2π Δ1 λ1 ˆ (2) = Q√[1 +√α (p)] e−ipξ1 e−λ1 χ eλ2 η2 (x2 ≤ 0) U (5.43) 3 2 2π Δ1 λ1 √ √ λ1 Δ1 − λ2 Δ2 √ α (p) = √ λ1 Δ1 + λ2 Δ2

Using the initial notation, according to (5.39), we ﬁnd (1) U3

Q (x1 , x2 ; ξ1 , ξ2 ) = √ 2π Δ1 +

(2)

U3 (x1 , x2 ; ξ1 , ξ2 ) =

Q √ 4π Δ1 Q √ 4π Δ1

∞ 0

∞

cos p (x1 − ξ1 ) −λ1 |x2 −ξ2 |Imμ1 e dp+ λ1

−∞

∞

−∞

(5.44)

α (p) ip(x1 −ξ1 ) −λ1 (x2 +ξ2 )Imμ1 e e dp (x2 > 0) λ1 1 + α (p) ip(x1 −ξ1 ) −λ1 ξ2 Imμ1 λ2 x2 Imμ2 e e e dp λ1

(x2 ≤ 0) Integral in (5.44) prescribed on a semi-inﬁnite interval according to the radiation conditions will be understood in the general meaning [43] Q √ I= 2π Δ1

∞ 0

cos p (x1 − ξ1 ) −λ1 |x2 −ξ2 |Imμ1 e dp = λ1

∞ −√p2 +γ∗2 |x2 −ξ2 |Imμ1 e Q √

im cos p (x1 − ξ1 ) dp = 2π Δ1 ε→+0 p2 + γ∗2 0 + γ∗ = −i γ12 + iε, ε > 0, Reγ∗ > 0

Using the value of the integral :

∞ 0

√

e−c x +z √ cos bxdx = K0 z b2 + c2 (b, Rec, Rez > 0) x2 + z 2 2

2

5.7 Fundamental Solution for a Composite Anisotropic Space

219

and the connection between functions of MacDonald and Hankel [109] K0 (−ix) =

πi (1) H (x) 2 0

we ﬁnd iQ (1) I = √ H0 (γ1 ρ∗ ) 4 Δ1 ρ∗ = |z1 − z∗ |, z = x1 + μ1 x2 , z∗ = ξ1 + μ1 ξ2

(5.45)

Thus, the expression for displacement amplitude when x2 > 0 may be represented in the following form (1) U3

Q (x1 , x2 ; ξ1 , ξ2 ) = I + √ 4π Δ1

∞ −∞

α (p) ip(x1 −ξ1 ) −λ1 (x2 +ξ2 )Imμ1 e e dp (5.46) λ1

where quantity I is the fundamental solution for a homogeneous anisotropic space. Using the equations of state (5.36) and formulas (5.44)–(5.46) we will determine the expressions for the stress amplitudes in a composite anisotropic space. Taking into account the formulas of diﬀerentiation (4.10) and equality ∂1 =

∂ ∂ ∂ ∂ + , ∂2 = μ1 +μ ¯1 ∂z1 ∂z1 ∂z1 ∂ z¯1

we will have

(r) (r) σkj = Re Skj e−iωt (r = 1, 2)

(1)

(5.47)

iQ (1) γ1 H1 (γ1 ρ∗ ) sin β 4

∞ Q α (p)eip(x1 −ξ1 ) e−λ(x2 +ξ2 )Imμ1 dp − 4π

S23 (x1 , x2 ; ξ1 , ξ2 ) = −

−∞

(2) S23 (x1 , x2 ; ξ1 , ξ2 ) = −

Q 4π

Δ2 Δ1

∞

−∞

λ2 [1+α (p)]eip(x1−ξ1 ) e−λ1 ξ2 Imμ1 eλ2 x2 Imμ2 dp λ1

(1) iQc55

(1) (1) S13 (x1 , x2 ; ξ1 , ξ2 ) = − √ γ1 H1 (γ1 ρ∗ ) cos β 4 Δ1 ∞ (1)

iQc pα (p) ip(x1 −ξ1 ) −λ1 (x2 +ξ2 )Imμ1 + √ 55 e e dp λ1 4 Δ1 (2)

S13 (x1 , x2 ; ξ1 , ξ2 ) =

(2) iQc55

√ 4π Δ1

−∞

∞

−∞

p [1+α (p)] eip(x1 −ξ1 ) e−λ1 ξ2 Imμ1 eλ2 x2 Imμ2 dp λ1

220

5 Scattering of a Shear Wave

Fig. 5.36. The contour lines of the modulus of the displacement amplitude in (1) (2) (1) (2) composite space (γ2 = 4, c44 = 4, c44 = 1, c55 = 1, c55 = 2)

(r)

It should be mentioned here that in the process of determining Skj in (5.47), we used the procedure of diﬀerentiation over the parameter with the sign of an improper integral, which is not admitted in this case.

Fig. 5.37. The contour lines of the modulus of the displacement amplitude in (2) (1) (2) composite space (γ2 = 4, c44 = 1, c44 = 4, c55 = 2, c55 = 1)

5.7 Fundamental Solution for a Composite Anisotropic Space

221

Fig. 5.38. The contour lines of the modulus of displacement amplitude in composite (1) (2) (1) (2) isotropic space (γ2 = 1, c44 = 3, c44 = 1, c55 = 3, c55 = 1)

Let us investigate the distribution of elastic displacements and stresses in a composite anisotropic space under the inﬂuence of concentrated forces of shear depending on the character of the anisotropic material and frequency of harmonic loading. The contour line of the absolute values of displacements in the area covering point (ξ1 , ξ2 ) for diﬀerent relations of the moduli of elasticity of the material are represented in Figs. 5.36–5.39. Figures 5.40 and 5.41 illustrate the behaviour of the contour lines of the moduli of the amplitude of stresses

Fig. 5.39. The contour lines of the modulus of displacement amplitude in composite (2) (1) (2) isotropic space (γ2 = 3, c44 = 1, c44 = 5, c55 = 5, c55 = 1)

222

5 Scattering of a Shear Wave

Fig. 5.40. The contour lines of the modulus of stress amplitude σ23 in a composite (2) (1) (2) space (γ2 = 2, c44 = 3, c44 = 1, c55 = 1, c55 = 2)

σ23 and σ13 , respectively. In calculations we assumed that the beginning of the system of coordinates is in the center of the considered square area and ξ = 0, ξ2 /a = 0.1, p1 = p2 (a is the length of a side of a square). More light regions correspond to maximum values of the investigated value.

Fig. 5.41. The contour lines of the modulus of stress amplitude σ13 in a composite (2) (1) (2) space (γ2 = 2, c44 = 3, c44 = 1, c55 = 1, c55 = 2)

5.8 An Anisotropic Bimorph with Tunnel Openings

223

5.8 An Anisotropic Bimorph with Tunnel Openings Let us use the constructed above fundamental solution for investigation of the stationary wave process in an orthotropic bimorph with heterogeneities of tunnel opening types. In the Cartesian system of coordinates x1 , x2 , x3 let a composite anisotropic space (bimorph) be weakened in the upper half-space x2 > 0 by tunnel along axis x3 openings Γj (j = 1, 2, . . . , n). Along line x1 = ξ1 , x2 = ξ2 > changing with time, not 0, −∞ < x3 < ∞ a concentrated, horizontal, depend ing on coordinate x3 shear force q = Re Qδ (x1 − ξ1 , x2 − ξ2 ) e−iωt acts, and on the surface opening shear stress X3n = Re X3 e−iωt possibly appears. It is assumed that the elastic properties of the materials of the composite space are orthotropic, the curves of contour Γj and function X3 belong to the class of functions inﬁnite by H¨ older (∩Γj = Ø). Under the given conditions the composite space is a state of antiplane deformation described by the system of (5.35), (5.36). It is necessary to add coupling condition (5.37) to them, and also the boundary conditions on the surface of the openings at point ζ = ε1 + iε2 ∈ Γj (j = 1, 2, . . . , n) (1)

(1)

σ13 cos ψ + σ23 sin ψ = X3n .

(5.48)

Here ψ is the angle between the normal to contour Γj at point ζ and axis Ox1 (Fig. 5.42). (r) (r) Assuming u3 = Re U3 e−iωt we will write boundary condition (5.48) with respect to the amplitude of displacement as follows (1)

(1)

∂U3 ∂U iX3 − a (ψ) ¯3 = √ (5.49) ∂ζ1 ∂ ζ1 Δ1 a (ψ) = μ1 cos ψ − sin ψ, ζ1 = ε1 + μ1 ε2 , ξ2 > 0, (ε1 , ε2 ) ∈ Γ.

a (ψ)

Here, by partial derivatives from the amplitude of displacement we imply their limiting values when the inner point of region z tends to boundary point ζ ∈ Γ. n

Γ1 x2 1 2

Γj

ψ

O x1

Fig. 5.42. A composite space with tunnel openings

224

5 Scattering of a Shear Wave

Thus, it is required to determine the amplitudes of displacements in the bimorph from diﬀerential equations of Helmoh¨ oltz (5.38), coupling conditions (5.37), boundary conditions (5.49), and also the conditions of radiations at inﬁnity. The wave ﬁeld of displacement in the bimorph with heterogenities is composed of a ﬁeld caused by the action of a harmonic source and a ﬁeld diﬀused by tunnel openings. Using the fundamental solution determined by formulas (5.44)–(5.46) we can represent the amplitude of displacement in region x2 > 0 in the following way

(1) U3 (z) = f (ζ)K (ζ, z) ds + U3∗ (z) , (5.50) Γ

i i (1) K (ζ, z) = √ H0 (γ1 ρ∗ ) + √ 4 Δ1 4π Δ1

∞ −∞

α (p) ip(x1 −ε1 ) −λ1 (x2 +ε2 )Imμ1 e e dp λ1

ρ∗ = |z1 − ζ1 |, ζ1 = ε1 + μ1 ε2 , ζ = ε1 + iε2 ∈ Γ, z = x1 + ix2 Here, displacement U3∗ (z) caused by the action of a source is determined by formulas (5.45), (5.46); ds is the element of the length of the arc of contour Γ. Taking into account (5.44) we obtain the analogous representation in region x2 ≤ 0

(2) U3 (z) = f (ζ)L (ζ, z) ds + U3∗∗ (z) , (5.51) Γ

1 L (ζ, z) = √ 4π Δ1

∞ −∞

1 + α (p) ip(x1 −ε1 ) −λ1 ε2 Imμ1 λ2 x2 Imμ2 e e e dp, λ1

U3∗∗

(z) is determined by the second formula in (5.44). where function Substituting the limiting values of derivative functions U31 (z) at z → ζ0 ∈ Γ in boundary conditions (5.49) we come to the integral equation of the second kind

f (ζ0 ) + f (ζ)G (ζ, ζ0 ) ds = N (ζ0 ) , (5.52) − 2 Γ

γ1 (1) G (ζ, ζ0 ) = H1 (γ1 P∗ ) Im w−iβ0 a (ψ0 ) 4i 1 a (ψ0 ) I1 (ζ, ζ0 ) − a (ψ0 )I2 (ζ, ζ0 ) + 8π

∞ p k − (−1) α (p) eip(ε10 −ε1 ) e−λ1 (ε20 +ε2 )Imμ1 dp, Ik (ζ, ζ0 ) = λ1 −∞

N (ζ0 ) = X3 (ζ0 ) − QG∗ (z∗ , ζ0 ) ,

5.8 An Anisotropic Bimorph with Tunnel Openings

G∗ (z∗ , ζ0 ) =

225

γ1 (1) H γ1 P∗0 Im e−iβ∗ a (ψ0 ) 4i 1 1 a (ψ0 ) M1 (z∗ , ζ0 ) − a (ψ0 )M2 (z∗ , ζ0 ) + 8π

∞

Mk (z∗ , ζ0 ) = −∞

p k − (−1) α (p) eip(ε10 −ξ1 ) e−λ1 (ε20 +ξ2 )Imμ1 dp, λ1

P∗ = (ζ10 − ζ1 ), P∗0 = |ζ10 − z∗ |, β0 = arg |ζ10 − z∗ |, β∗ = arg (ζ10 − z∗ ) , ψ0 = ψ (ζ0 ) , ζ0 = ε10 + iε20 , ζ10 = ε10 + μ1 ε20 , (ε10 , ε20 ) ∈ Γ = ∪Γj (j = 1, 2, . . . , n) . Here z∗ = ξ1 + μ1 ξ2 (ξ2 > 0) is the point of application of the concentrated forces of shear. To investigate the concentration of stresses at the opening, the inﬂuence of the interphase of media on it, the parameters of the anisotropy of the materials it is necessary to calculate stresses σs = σ23 cos ψ − σ13 sin ψ on the boundary. We have (5.53) σs = Re Ts e−iωt , (1) (1) ∂U3 ∂U − e (ψ0 ) 3 , Ts (ζ0 ) = i Δ1 e (ψ0 ) ∂ζ10 ∂ζ 10 e (ψ0 ) = cos ψ0 + μ1 sin ψ0 . Here, by the partial derivatives we imply their limiting values at z → ζ0 ∈ Γ. Using integral representation(5.50) we ﬁnally obtain

e (ψ0 ) 1 Ts (ζ0 ) = q (ζ0 ) Re (5.54) + q (ζ)H (ζ, ζ0 ) ds + H∗ (z∗ , ζ0 ) 2 a (ψ0 ) Γ

1 iγ1 (1) H1 (γ1 P∗ ) Im e (ψ0 ) e−iβ0 − e (ψ0 ) I1 − e (ψ0 )I2 H (ζ, ζ0 ) = 4 8π 1 iγ1 (1) H1 γ1 P∗0 Im e (ψ0 ) e−iβ∗ − e (ψ0 ) M1 − e (ψ0 )M2 H∗ (z∗ , ζ0 ) = 4 8π Quantities Ik , Mk are determined in (5.52). Let us investigate the concentration of stresses in bimorph containing in the upper half space x2 > 0 a single tunnel opening of an elliptic cross-section with parametric equations of type ε1 = R1 cos ϕ, ε2 = R2 sin ϕ + h (0 ≤ ϕ < 2π)

(5.55)

226

5 Scattering of a Shear Wave 0.8

η 1

0.5 2

γ2 R

0.1 0

1

2

Fig. 5.43. Changes of relative shear stress η = |TS R/Q| at point ϕ = π of the contour of an elliptic cavity as a function of normalized wave number γ2 R

For this case integral (5.52) was realized by the numerical method of quadratures. The calculations were carried out with the help of formula (5.54) allowing for (5.55). In calculations we assumed that ξ1 = 0, ξ2 /R1 = 4, h/R1 = 2, ρ1 = ρ2 . In Figs. 5.43 and 5.44 there are given the changes of quantities η = |Ts R/Q| and σ = |Ts /Z| in the function of normalized wave number γ2 R at point of contour ϕ = π under the inﬂuence of the concentrated shear forces 3.6

σ 1

2.1

2

0.6 0

1

γ2 R 2

Fig. 5.44. Changes of relative shear stress σ = |TS /Z| at point ϕ = π of the contour of an elliptic cavity as a function of normalized wave number γ2 R

5.8 An Anisotropic Bimorph with Tunnel Openings 0.4

227

η

1 0.3

2 0.2

γ2 R 0.1 0

1

2

3

Fig. 5.45. Changes of relative shear stress η = |TS R/Q| at point ϕ = π of the contour of a circular cavity as a function of γ2 R

and stress X3 = Z sin ϕ, respectively. Curves 1 and 2 correspond to val(1) (2) (1) (2) (1) ues R1 /R2 = 2, c44 = 2, c44 = 1, c55 = 1, c55 = 1 and c44 = 2, (2) (1) (2) c44 = 1, c55 = 2, c55 = 1. The similar results for the same parameters and in the same correspondence at R1 /R2 = 1 are shown in Figs. 5.45 and 5.46. 1.3

σ

1 0.9

2 0.5

γ2 R

0.1 0

1

2

3

Fig. 5.46. Changes of relative shear stress σ = |TS /Z| at point ϕ = π of the contour of a circular cavity as a function of γ2 R

228

5 Scattering of a Shear Wave 0.3

η 1

0.2

2 0.1

0.0 0

π

β

Fig. 5.47. Behaviour of quantity η = |TS R/Q| on the contour of a circular opening for various values of γ2 R

Figure 5.47 illustrates the changes of quantity η on the contour of circular (1) (2) (1) (2) cavity at c44 = 1, c44 = 2, c55 = 2, c55 = 1. Curve 1 is constructed for the static case of loading (γ2 R = 0), curve 2 is for γ2 R = 1.5 (R = 0.5 (R1 + R2 )). The represented results illustrate the inﬂuence of the dynamic eﬀect and conﬁguration of the opening on the concentration of stresses for various relations of moduli of elasticity of the material components of the bimorph.

6 Mixed Dynamic Problems of Electroelasticity for Piezoelectric Bodies with Surface Electrodes

In this chapter, we investigate some aspects of the application of boundary integral equations and integral transformations methods, used for the solution of mixed dynamic problems of electroelasticity. We describe the antiplane boundary problems of electric and mechanical loading of piezoceramic bodies with electrodes, and also the plane problems of excitation of Lamb and Rayleigh waves by the system of surface electrodes..

6.1 An Unbounded Medium with a Tunnel Opening. Direct and Inverse Piezoelectric Eﬀect Let us consider in the Cartesian system of coordinates Ox1 x2 x3 an unbounded piezoceramic medium with a tunnel along the axis of symmetry x3 opening, the cross-section of which is restrained by the smooth contour C. On the free from mechanical stresses surface of the opening 2n inﬁnitely long (in the direction of axis x3 ) thin electrodes with prescribed diﬀerence of the electric potential are located, and the unelectrodized regions of the surface of the cavity are bounded with vacuum (air). Let the boundaries of be the k-th electrode determined by quantities the β2k−1 and β2k k = 1, 2n , φ∗k = Re Φ∗k e−iωt (Fig. 6.1a). It is assumed that the electrodes are weightless and have negligible rigidity. The state of antiplane deformation is formulated under the conditions of an inverse piezoelectric eﬀect in the medium with a tunnel opening [140]. Under the quasistatic approximation, the system of equations of the antiplane boundary system of electroelasticity is reduced to a system of diﬀerential −iωt and the electric = Re U e equations with respect to the displacement u 3 3 potential φ = Re Φe−iωt . ∂ 2 u3 , ∂ t2 2 ∇ φ = 0.

2 2 cE 44 ∇ u3 + e15 ∇ φ = ρ

e15 ∇2 u3 − ε11

(6.1)

230

6 Mixed Dynamic Problems x2 β2

β2k – 1

β1

β2k

x1

Fig. 6.1a. Tunnel opening with a system of surface electrodes ε here cE 44 , 11 , e15 and ρ are the shear modulus measured at a constant electric ﬁeld, the dielectric permeability measured at constant deformation, the piezoelectric constant and the mass density of the material, respectively; t is the time. From the system (6.1) we obtain the following relations

∂ 2 u3 = 0, ∇2 F = 0, ∂ t2 2 cE e15 e15 44 (1 + k15 ) , k15 = φ = ε u3 + F, c = , ε 11 ρ cE 44 11

∇2 u3 − c−2

(6.2)

where c is the velocity of the shear wave in the piezomedium, k15 is the electromechanic coupling coeﬃcient. The components of the electric ﬁeld are expressed as functions of u3 and F ∂ E 2 u3 + e15 F , c44 1 + k15 ∂z ∂F , D1 − iD2 = −2 ε11 ∂z ∂ e15 E1 − iE2 = −2 F + ε u3 , z = x1 + ix2 . ∂z 11 σ13 − iσ23 = 2

(6.3)

Here σij is the stress of a longitudinal shear, Dj and Ej are the components of the induction vectors and the electric ﬁeld strength, respectively. Taking into account (6.2), (6.3) the mechanical and electric boundary problems on the surface of the opening may be written down in the form ∂ E 2 u3 + e15 F = 0 on C, c 1 + k15 ∂n 44 e15 φ(ζ, t) = F + ε u3 = φ∗ (ζ, t), ζ ∈ Cφ , 11 ∂F = 0 on C\Cφ , “Dn = −11 ∂n

(6.4)

where Cφ is the part of contour C, corresponding to the electrodized surface of the cavity, φ∗ (ζ, t) are the given function, t is the time.

6.1. An Unbounded Medium with a Tunnel Opening

231

Equation (6.2), recorded with respect to amplitude functions U3 and F , we obtain the form ∇2 U3 + γ 2 U3 = 0, ∇2 F ∗ = 0, ω e15 Φ = ε U3 + F ∗ , γ = , 11 c

(6.5)

where γ is the wave number. The task here is to deﬁne displacement amplitude U3 and harmonic function F ∗ from diﬀerential (6.5) and boundary conditions (6.4). The solution of the stated mixed boundary problem of electroelasticity is obtained using the method of boundary integral equations. Under this framework we seek for a solution of the following form [190] 1 (1) p (ζ)H0 (γ r) ds, U3 (x1 , x2 ) = E c44 C ∂ F ∗ (x1 , x2 ) = f (ζ)

nrds, r = |ζ − z| , ζ ∈ C. (6.6) ∂ nζ C

(1)

where Hν (x) is the Hankel’s function of the second kind and of ν-th order; ds is the element of the arc-length of contour C; the diﬀerential operator ∂/∂n deﬁnes the derivative in the direction of the normal to contour C. The representation of U3 (x1 , x3 ) in (6.6) satisﬁes the radiation conditions of the wave ﬁeld of displacement at inﬁnity. Substituting the limiting values of functions (6.6) at z → ζ0 ∈ C into conditions (6.4) and integrating by parts the divergence integrals; we derive a system of singular integrodiﬀerential equations of the second kind 2ip (ζ0 ) + {p (ζ) g1 (ζ, ζ0 ) + f (ζ) g2 (ζ, ζ0 )}ds = N1 (ζ0 ) , ζ0 ∈ C, C

− π f (ζ0 ) +

{p (ζ) g3 (ζ, ζ0 ) + f (ζ) g4 (ζ, ζ0 )}ds = N2 (ζ0 ) , ζ0 ∈ Cφ , C

f (ζ)g5 (ζ, ζ0 ) ds = 0, ζ0 ∈ C\Cφ , C

eiψ0 2 Re + γH1 (γ r0 ) cos (ψ0 − α0 ) , π i ζ − ζ0 e15 eiψ0 g (ζ, ζ ) , g (ζ, ζ ) = Im , g2 (ζ, ζ0 ) = 5 0 5 0 2 1 + k15 ζ − ζ0 g1 (ζ, ζ0 ) =

2 k15 eiψ (1) H0 (γ r0 ) , g4 (ζ, ζ0 ) = Re , e15 ζ − ζ0 N1 (ζ0 ) = 0, N2 (ζ0 ) = Φ∗ (ζ0 ) ,

g3 (ζ, ζ0 ) =

232

6 Mixed Dynamic Problems

df 2i (1) , H1 (x) = + H1 (x) , ds πx r0 = |ζ − ζ0 | , α0 = arg (ζ − ζ0 ) , ψ10 = ψ (ζ0 ) .

f (ζ) =

(6.7)

Here ψ is the angle between the normal to contour C and Ox1 -axis; Φ∗ (ζ0 ) is the piecewise-constant function prescribing the peak values of potentials on the electrodized regions. We ﬁnd functions p (ζ) and f (ζ) from system (6.7) based on (6.2), (6.3) using representations (6.6) so afterwards we can calculate all components of the wave electroelastic ﬁeld in the medium. Parameterizing contour C with the help of ζ = ζ (β) , ζ0 = ζ (β0 ) (0 ≤ β, β0 ≤ 2π), we can ﬁnd an expression giving the amplitude of distribution density of electric charges qk (β) on k-th electrode. Taking into account the fact that the opening is bounded by vacuum, we can write qk (β) = Dn(k) (β) , β2k−1 < β < β2k k = 1, 2n . (6.8) (k)

Here Dn (β) represents the amplitude of the normal component of the electric induction vector on the surface of the opening covered with k-th electrodes. Using the integral representation (6.6) for the function F ∗ (x1 , x2 ) and taking into account (6.3), (6.8) we ﬁnd eiψ0 ε qk (β0 ) = − 11 f (ζ)Im ds, ζ0 ∈ Cφk , (6.9) ζ − ζ0 C

where Cφk is the part of contour C on which the k-th electrode is placed. Integrating expression (6.9) with respect to the variable β0 over the limits from β2k−1 to β2k , we obtain the peak value of the total charge Qk of the k-th electrode and equal to the unity of its length. We can determine the current passing through the given electrode that is equal to the conduction current in the generator circuit, using formula ⎧ ⎫ ⎪ ⎪ β2k ⎨ ⎬ ds qk (β0 )s (β0 ) dβ0 , s (β0 ) = . (6.10) Ik (t) = Re iωe−iωt ⎪ ⎪ dβ 0 ⎩ ⎭ β2k−1

Let us now apply the above described approach to the situation where a piezoceramic medium with a tunnel opening is used as a generator of electric energy. The mechanical excitation in that case comes from two plane monochromatic shear waves propagating in the positive and negative directions of x2 -axes. Considering the values of the displacement amplitude u3 and electric potential φ, to be known we get (1)

U3

Φ(j)

(2)

= τ1 e−iγx2 , U3 = τ2 eiγx2 , e15 (j) = ε U3 (j = 1, 2) . 11

(6.11)

6.1. An Unbounded Medium with a Tunnel Opening

233

We also assume that the cross-section of the cavity is symmetrical to the coordinate axes and that on its surface there are two inﬁnitely long electrodes placed symmetrically to x2 - axis (Fig. 6.1b). To obtain the diﬀerence of electric potentials 2V (t) under the medium deformation, appearance of electric charges of opposite signs on the electrodized surfaces is necessary. This requires the compliance of the displacement amplitude in monochromatic waves. Therefore in (6.11) we write τ1 = −τ2 = τ . The generated energy is consumed on the outer electric circuit connecting the electrodes, and may be modeled as by losses on the element with conduction Y (Fig. 6.1b). In this case both the value of the diﬀerences of potentials on electrodes 2V (t), and the current I (t) in the circuit are unknown [115]. The electric boundary condition of the considered problem is obtained by applying the Ohm’s law in the outer circuit [167] I (t) = 2Y V (t) .

(6.12)

In this case the construction of the solution of the boundary problem is derived by prescribing the unknown diﬀerence of electric potentials 2V (t) on the electrodes, i.e. the use of the boundary conditions (6.4) under the inﬂuence of harmonic waves. Thus, from equalities (6.9), (6.10) and (6.12) we can determine the unknown potential amplitude V (t) on the electrode V ∗ (ω) = β2 Bm =

iτ ω ε11 B1 , 2Y − iω ε11 B2 Am (β0 ) s (β0 ) dβ0 (m = 1, 2) ,

β1

Am (β0 ) = −

fm (ζ) Im

C

(6.13)

eiψ0 ds. ζ − ζ0

Shear wave X2

Y

O X1

Fig. 6.1b. The scheme of spreading of shear waves in a medium with an electrodized opening

234

6 Mixed Dynamic Problems

Here functions fm (ζ) (m = 1, 2) represent “standard” solutions of system (6.7) in which the right parts are: (1)

N1 (ζ0 ) = 2iγcE 44 sin ψ0 cos γξ20 , 2e15 (1) N2 (ζ0 ) = ε i sin γξ20 , 11

(6.14)

(2)

N1 (ζ0 ) = 0, (2)

N2 (ζ0 ) =

1, β1 < β0 < β2 , −1, β3 < β0 < β4 ,

ζ0 = ξ10 + iξ20 ∈ C,

where quantities βk k = 1, 4 deﬁne the positions of the electrodes. From (6.14) we get two limiting cases for the disconnected (Y = 0) and short-connected (Y → ∞) circuits. In the ﬁrst case the total charge on the electrodes does not change under the deformation of the medium, and in the second it is obvious that V (t) = 0. As an example consider the piezoceramic medium (of P ZT − 4), weakened by the cavity of elliptic cross-section (R1 and R2 are the half-axes of the ellipse) with two and four active surface electrodes. For these cases, the system (6.7) was solved numerically by the method of quadratures (see: Appendix B, Par. B.3). Figure 6.2 illustrates the change of quantity Q∗ = |Q/(ε11 Φ∗ )| (Q is the amplitude of the total charge on the electrode) as a function of the normalized wave number γR due to the potential diﬀerences 2Φ∗ on two electrodes. Curves 1, 2 and 3 are constructed for R1 /R2 = 1, β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6; βk = (2k − 1) π/4 k = 1, 4 and β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14 (R = 0.5 (R1 + R2 )). ∗ as a function The graphs characterizing the change of δ = cE 44 U3 Φ of the polar angle β on the contour C is given in Fig. 6.3. Curves 1–4 are

5.4

Q*

1 3.2 2 3

1.0 0.0

γR 1.5

3.0

Fig. 6.2. Changes of summarized electric charge on an electrode as a function of the normalized wave number

6.1. An Unbounded Medium with a Tunnel Opening

235

δ

18

1

2

3

9

β

0

π/2

0

π

Fig. 6.3. Changes of quantity δ = cE 44 /u3 on the contour of an opening for various areas of the electrodized coating

constructed for R1 /R2 = 2, γR = 0.5, β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14; βk = (2k − 1) π/4 k = 1, 4 and β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6. Figure 6.4. illustrates the behavior of δ on the contour of the circular cavity for γR = 0, 1, 2 and 3 at β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 2π/14 (shown by curves 1-4, respectively). Figure 6.5 shows the change of the amplitude modulus with respect to the electric potential V ∗ = |ε11 V ∗ /τ e15 | on an electrode as a function of γR under the inﬂuence of the harmonic waves of (6.11) type for a circular opening. The calculations were carried out using (6.13) for the “no-load ” mode (disconnected electrodes). Curves 1–3 correspond to the following variβ2 = 9π/14, β3 = ants of the distribution of the electrodes: β1 = 5π/14, 19π/14, β4 = 23π/14; βk = (2k − 1)π/4 k = 1, 4 and β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6. δ

14

1 2 7 3 4 0

β 0

π/2

π

∗ Fig. 6.4. Changes of δ = cE 44 |u3 /Φ | on the contour of an opening for various values of parameter γR

236

6 Mixed Dynamic Problems 2.7

1

2 3

1.8

0.9

0.0

γR 0

1

2

3

Fig. 6.5. Changes of the electric potential amplitude on an electrode as a function of the normalized wave number for various sizes of electrodized areas

Figures 6.6 and 6.7 show the contour line of the modulus of the displacement amplitude in the nearest and farthest zones of the opening, for the cases of two and four active electrodes, respectively; we used the following values: β3 = 19π/14, β4 = 23π/14 (Fig. 6.6) γR = 1, β1 = 5π/14, β2 = 9π/14, and βk = (2k − 1)π/8 k = 1, 8 (Fig. 6.7). In each of the four the electrodes electric potential was assumed to be equal Φ∗j = (−1)j+1 B j = 1, 4 . From the results it follows that the inertial eﬀect inﬂuences considerably the behavior of the electric quantities both in the direct and the inverse piezoeﬀect. For example, from Fig. 6.2 we conclude that the quantity Q∗ characterizing the total electric charge on an electrode, under the dynamic loading may exceed its static analogue by 9%. The distribution of the displacements

Fig. 6.6. Distribution of the displacement amplitude in a medium with circular openings with four active electrodes at γR = 1

6.2 Interaction of Two Openings in an Unbounded Medium

237

Fig. 6.7. Distribution of the displacement amplitude in a medium with circular openings with four active electrodes at γR = 1

in the medium region is considerably changed, with respect to the number of the electrodes and their location on the surface of the opening (see Figs. 6.6 and 6.7). Also the zones of the maximum displacements are opposite to the electrodized regions of the surface.

6.2 Interaction of Two Openings in an Unbounded Medium Let us mow consider a piezoceramic medium weakened by two tunnel along the axis of the symmetry of material x3 openings C1 and C2 in the Cartesian system of coordinates Ox1 x2 x3 (Fig. 6.8). On the free from mechanical stresses surfaces of openings C1 and C2 , 2n1 and 2n2 inﬁnitely long (in the direction of axis x3 ) electrodes are placed, with prescribed diﬀerences of the electric potentials. The unelectrodized regions are bounded with vacuum (air). The boundaries of the k-th electrode located on contour Cm are determined by (m) (m) the quantities β2k−1 and β2k (k = 1, 2n1 , if m = 1; k = 1, 2n2 , if m = (m)

2), and the electric potential on it, is prescribed by the quantity φk = (m) −iωt Re Φk e . The conﬁguration of the opening and the location of coupled electrodes cannot be quite arbitrary; it should be such that the reﬂected waves from the boundary can introduce similar charges (over the absolute quantity) on these electrodes.

238

6 Mixed Dynamic Problems x2

C1

C2

x1

Fig. 6.8. The scheme of a space with two openings

The mechanical and electric boundary conditions on the openings have the form of (6.4), where we assume C = C1 ∪ C2 . Let us represent the amplitudes of solutions of (6.5) in the form (1) (1) U3 (x1 , x2 ) = p1 (ζ) H0 (γ r) ds + p2 (ζ ∗ ) H0 (γ r∗ ) ds; C1

F ∗ (x1 , x2 ) =

C1 ∗

∂ f 1 (ζ)

nrds + ∂n

C2

f 2 (ζ ∗ )

C2

∂

nr∗ ds; ∂n

(6.15)

r = |ζ − z| , r = |ζ ∗ − z| , ζ ∈ C1 , ζ ∗ ∈ C2 , (1)

where Hν (x) is the Hankel’s function of the ﬁrst kind and of ν-th order. The integral representations (6.15) satisfy the conditions of radiation at inﬁnity. Substituting the limiting values of functions (6.15) at z → ζ0 ∈ C1 and z → ζ0∗ ∈ C2 into the boundary conditions (6.4) we arrive at a system of singular integrodiﬀerential equations 2ip1 (ζ0 ) + {p1 (ζ) g1 (ζ, ζ0 ) + f1 (ζ) g2 (ζ, ζ0 )}ds+ +

C1

{p2 (ζ ∗ ) g1 (ζ ∗ , ζ0 ) + f2 (ζ ∗ ) g2 (ζ ∗ , ζ0 )}ds = 0, ζ0 ∈ C1 ;

C2

2ip2 (ζ0∗ ) +

+

{p1 (ζ) g1 (ζ, ζ0∗ ) + f1 (ζ) g2 (ζ, ζ0∗ )}ds+

C1

{p2 (ζ ∗ ) g1 (ζ ∗ , ζ0∗ ) + f2 (ζ ∗ ) g2 (ζ ∗ , ζ0∗ )}ds = 0, ζ0∗ ∈ C2 ;

C2

{p1 (ζ) g3 (ζ, ζ0 ) + f1 (ζ) g4 (ζ, ζ0 )}ds+

− π f1 (ζ0 ) + + C2

C1

{p2 (ζ ∗ ) g3 (ζ ∗ , ζ0 ) + f2 (ζ ∗ ) g4 (ζ ∗ , ζ0 )}ds = Φ∗1 (ζ0 ) , ζ0 ∈ C1φ ;

6.2 Interaction of Two Openings in an Unbounded Medium

− πf2 (ζ0∗ ) + +

{p1 (ζ) g3 (ζ, ζ0∗ ) + f1 (ζ) g4 (ζ, ζ0∗ )}ds+

C1

{p2 (ζ ∗ ) g3 (ζ ∗ , ζ0∗ ) + f2 (ζ ∗ ) g4 (ζ ∗ , ζ0∗ )}ds = Φ∗2 (ζ0∗ ) , ζ0∗ ∈ C2φ ;

C2

f1 (ζ) g5 (ζ, ζ0 ) ds +

C1

239

f2 (ζ ∗ ) g5 (ζ ∗ , ζ0 ) ds = 0, ζ0 ∈ C1 \C1φ ;

C2

f1 (ζ) g5 (ζ, ζ0∗ ) ds +

C1

f2 (ζ ∗ ) g5 (ζ ∗ , ζ0∗ ) ds = 0, ζ0∗ ∈ C2 \C2φ ;

C2

eiψ0 2 g1 (ξ, η) = Re + γ H1 (γ r0 ) cos (ψ0 − α0 ) ; πi ξ − η e15 e15 (1) g5 (ξ, η) , g3 (ξ, η) = ε H0 (γ r0 ) ; g2 (ξ, η) = E 2 11 c44 (1 + k15 )

eiψ0 2i (1) , H1 (x) = + H1 (x) ; ξ−η πx eiψ dfm , r0 = |ξ − η| , fm ; (ζ) = g4 (ξ, η) = Re ξ−η ds α0 = arg (ξ − η) , ψ0 = ψ (η) , ψ = ψ (ξ) . g5 (ξ, η) = Im

(6.16)

Here ψ is the angle between the normal to contour C and x1 -axis, Φ∗m (η) is the piecewise-constant function, giving the values of the electric potential on the electrodes. We calculate functions pm (ζ) and fm (ζ) as deﬁned in (6.16), from formulas (6.3) using representations (6.15) so afterwards we may determine all ﬁeld quantities in the medium. Let us now ﬁnd the expression for the density amplitude of the distri(m) (m) bution of electric charges qk β on the k-the electrode located on the the contour Cm with the help of contour Cm (m = 1, 2). Parameterizing 0 ≤ β (m) ≤ 2π and taking into account the ζ = ζ β (1) , ζ ∗ = ζ ∗ β (2) fact that, the openings are bounded by vacuum, we can write (m) (m) (m) β (m) = Dn(m,k) β (m) , β2k−1 < β (m) < β2k (m = 1, 2) . (6.17) qk (m,k) (m) Here Dn β represents the amplitude of the normal component of the electric induction vector on the corresponding electrodized region of the contour Cm . Using (6.15) f and taking into account (6.17) we ﬁnd ⎫ ⎧ ⎬ ⎨ iψ0 iψ0 e e (m) (m) ds + f2 (ζ ∗ ) Im ∗ ds , qk f1 (ζ) Im β0 = − ε11 ⎩ ζ −η ζ −η ⎭ C1

C2

(6.18)

240

6 Mixed Dynamic Problems

(m) ∈ Cmφk , Cmφk are the parts of contour Cm , where the k-th where η β0 electrode is located. (m) (m) Integrating (6.18) from β2k−1 to β2k , we obtain the peak value of the (m)

total charge Qk of the k-th electrode on contour Cm with respect to the unity of its length. The current ﬂow through the given electrodes may be determined by ⎫ ⎧ (m) ⎪ ⎪ β 2k ⎪ ⎪ ⎬ ⎨ (m) (m) (m) (m) (m) −iωt , Ik (t) = Re iωe β0 s β0 dβ0 qk ⎪ ⎪ ⎪ ⎪ ⎭ ⎩ (m) (m) s β0 =

β2k−1

ds (m)

dβ0

.

(6.19)

As an example let us consider a medium from ceramics P ZT − 4 with two circular openings determined by ζ = R eiβ

(1)

− a, ζ ∗ = R eiβ

(2)

+ a, β (m) ∈ [0, 2π] .

(6.20)

Two inﬁnite electrodes are located on the surface of each cavity (m) (m) (m) (m) Cm , β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14 . (1) Figure 6.9 shows the change of quantity Q∗ = Q1 / (ε11 Φ∗ ), as a function of the normalized wave number γR. Curves 1 and 2 are constructed (1) (2) (1) (2) for the cases of loading Φ1 = Φ1 = Φ∗ , Φ2 = Φ2 = −Φ∗ and (1) (2) (1) (2) Φ1 = −Φ1 = Φ∗ , Φ2 = −Φ2 = −Φ∗ , respectively. The solid lines correspond to a/R = 2, the dashed ones to a/R = 3. Figures 6.10a, b and 6.11a, b illustrate the contour lines of the modulus of the displacement amplitude for various variants of loading at γR = 0.5 and 2 respectively (more light zones correspond to the maximum value of quantity |U3 |). 4.0

Q*

2 2

2.6 1 1

1.2

γR 0

1

2 (1)

Fig. 6.9. Changes of relative total electric charge Q∗ = |Q1 /(εs11 Φ∗ )| on an electrode as a function of the normalized wave number

6.2 Interaction of Two Openings in an Unbounded Medium

241

Fig. 6.10a. The contour lines of the modulus of the displacement amplitude in a (1) (2) (1) (2) medium with two openings (γR = 0, 5, Φ1 = Φ1 = Φ∗ , Φ2 = Φ2 = −Φ∗ )

The analysis of the results shows that the behavior of the components of the electric ﬁeld on the boundary and in the area of a piecewise-homogeneous medium depends considerably on the frequencies of harmonic excitation, the disposition of the openings and the values of the potentials prescribed on the

Fig. 6.10b. The contour lines of the modulus of the displacement amplitude in a (1) (2) (1) (2) medium with two openings (γR = 0, 5, Φ1 = −Φ1 = Φ∗ , Φ2 = Φ2 = −Φ∗ )

242

6 Mixed Dynamic Problems

Fig. 6.11a. The contour lines of the modulus of the displacement amplitude in a (1) (2) (1) (2) medium with two openings (γR = 2, Φ1 = Φ1 = Φ∗ , Φ2 = Φ2 = −Φ∗ )

system of electrodes. As it follows from Fig. 6.9 due to the dynamic eﬀect, the quantity Q∗ may exceed its static analogue by 27%. In the case of antiplane deformation the stresses of longitudinal shear on a free from mechanical loading surface do not have singularities on the edges of the electrodes. At the same time considering the singular integral (6.16) and expressions (6.17), (6.18) we conclude that the components of the

Fig. 6.11b. The contour lines of the modulus of the displacement amplitude in a (1) (2) (1) (2) medium with two openings (γR = 2, Φ1 = −Φ1 = Φ∗ , Φ2 = Φ2 = −Φ∗ )

6.3 Excitation of a Medium with an Opening by an Electric Impulse

243

electric induction vector have singularities on the edges of the electrodes of the root type. The presented approach used for a coupled electroelastic ﬁeld in a medium with openings may be also implemented for the estimation of the characteristics of the perforated piezoelectric transducers of various geometry under electric loading with the help of multi-electroded systems, and also for the estimations of piezoelectric stress generators, where the direct transformation of mechanical energy into electric en energy occurs under the inﬂuence of mechanical load. The numerical scheme given in Appendix , Par. B.3 for the solution of system (6.16) permits us to investigate various variants of the electric excitation of the ﬁelds without any principle complication of the calculation algorithm.

6.3 Excitation of a Medium with an Opening by an Electric Impulse The above described methodology for the harmonic loading of a medium with tunnel openings may be generalized to deal with the case of a non-stationary (impulse) change with time of the diﬀerences of the electric potential. In this case the solution of the dynamic problem is the superposition of the “elementary” solutions over the whole spectrum of frequencies. Using the Fourier integral transform 1 μ (x, t) = √ 2π

∞

M (x, ω)e−iωt dω,

−∞

1 M (x, ω) = √ 2π

∞

μ (x, t)eiωt dt, M (x, −ω) = M (x, ω)

(6.21)

−∞

the initial mixed problem is reduced to equations of (6.4) type with respect to displacement transformant u3 and functions F under the corresponding boundary conditions. The following procedure for the solution of the problem is analogous to Par. 6.1. In conclusion we deduce the solution according to the formula of inversion of Fourier integral transform (6.21). Parametrizing contour C with the help of ζ = ζ (β) , ζ0 = ζ (β0 ) (0 ≤ β, β0 ≤ 2π), we ﬁnd the expression for the spectral function of the distribution density of electric charges qk (β, ω) on the k-th electrode. Taking into account the fact that the opening is bounded by vacuum, we may write qk (β, ω) = Dn(k) (β, ω) , β2k−1 < β < β2k . (k)

(6.22)

Here Dn (β, ω) represents the transformant of the normal component of the electric induction vector on the surface of the opening covered with

244

6 Mixed Dynamic Problems

the k-th electrode. From the integral representation (6.6) for the function F ∗ (x1 , x2 , ω) and using Dn = − ε11 ∂F/∂n we ﬁnd eiψ0 ε qk (β0 , ω) = − 11 f (ζ)Im ds, ζ0 (β0 ) ∈ Cφk , (6.23) ζ − ζ0 C

where Cφk is the part of contour C where the k-th electrode is positioned. Integrating expression (6.23) with respect to β0 from β2k−1 to β2k , we obtain the spectral function for the total charge of the k-th electrode corresponding to the unity of its length. Finally, using the initial notation, we ﬁnd ∞ 2 rRe Yk (ω) e−iωt dω, Qk (t) = π 0

β2k Yk (ω) =

qk (β0 , ω) s (β0 ) dβ0 .

(6.24)

β2k−1

As an example, in Fig. 5.28 we give the calculations of the time relation of the full charge Q on the electrode for the medium from P ZT − 4 with a circular opening under the inﬂuence of electric impulse 2φ∗ (t) of the trapezoidal form. Fig. 6.12 demonstrate the change of Q∗ = Q/ (σ ε11 ) (σ = max φ∗ (t)), for each of the two active electrodes as a function of dimensionless time t∗ = c∗ tR−1 (R is the radius of the opening, c∗ is the velocity of the shear wave in the piezomedium). The values of the parameters of the impulse were set to T ∗ = c∗ T R−1 = 10, d∗1 = c∗ d1 R−1 = 1, d∗2 = c∗ d2 R−1 = 8, σ ∗ = c∗ σR−1 = 1V /s. Curves 1 and 2 are constructed for β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6 and β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14, respectively. The quantity Q (t) is calculated with the help of (6.23), (6.24), and the function f (ζ) is calculated from system (6.7) for each value of ω

5.4

Q*

4.8 1

4.2 3.6

2

3.0 2.4 1.8 1.2 0.6 0.0

t*

–0.6 0.0

3.2

6.4

9.6 ∗

12.8

16.0

Fig. 6.12. Changes of total electric charge Q on an electrode during the impulse change of the diﬀerence of the electric potential

6.4 Excitation of Shear Waves in an Inﬁnite Cylinder

245

δ

15.0

7.5 t* = 1

14 0.0 11 –7.5

10 3 5

–15.0 0

β π

2π

Fig. 6.13. Changes of quantity δ as a function of polar angle β for various values t∗

Figure 6.13 illustrates the evolutionary development of the shear displacement on the boundary of the circular cavity under the inﬂuence of an electric impulse of trapezoidal form. The graphs characterizing the change of quantity δ = cE 44 u3 /σ as a function of polar angle β, are represented for various values of dimensionless time t∗ . Here we should mention that the curves in Fig. 6.12 have characteristic breaks, corresponding to the same breaks of the graph of a trapezoidal impulse. This situation is conditioned by the quasistatic character of the behavior of an electric ﬁeld which immediately reacts to the changes of the electric ﬁeld potential φ∗ (t).

6.4 Excitation of Shear Waves in an Inﬁnite Cylinder with an Arbitrary System of Electrodes Consider an antiplane mixed boundary problem of electroelasticity for a piezoceramic cylinder with a system of active surface electrodes, exciting its oscillation. The same problem for a circular cylinder with a system of two symmetrically positioned electrodes by the method of series is investigated in [140]. In the Cartesian system of coordinates Ox1 x2 x3 let us have an inﬁnite, along x3 -axis, a piezoceramic cylinder with axial polarization, the crosssection of which is bounded by smooth the contour C (Fig. 6.14). On the free from mechanical forces surface of the cylinder, 2n inﬁnitely long along axis x3 electrodes are positioned. The diﬀerences of the electric potential on them are given while the unelectrodized areas of the cylinder are bounded by vacuum. The boundary of the k-th electrode is determined by β2k−1 and β2k k = 1, 2n , and the electric potential on it is prescribed by φ∗k (t) = Re Φ∗k e−iωt .

246

6 Mixed Dynamic Problems x2 β2

β1

β2k–1

x1

β2k

Fig. 6.14. The scheme of the cross-section of a partially electrodized cylinder

The above problem unlike the one studied in Sect. 6.1 represents an inside boundary problem for the cylinder. Therefore the diﬀerential (6.5) and boundary conditions (6.4) are valid here too. As a result we obtain the system of integrodiﬀerential (6.7), where the signs before the integrated summand should be changed to the opposite ones. Here we must note that in this case the solution of system (6.7) exists for any frequency ω not coinciding with its eigenfrequency. As an example we will investigate the behavior of the components of an electric ﬁeld in a circular cylinder (from ceramics P ZT − 4) with radius R excited by two symmetrically positioned electrodes with a diﬀerence of potential amplitudes equal to 2Φ∗ . ∗ The graphs giving the change δ = cE 44 |U3 /Φ | as a function of the polar angle β on the contour C are given in Fig. 6.15. Curves 1–4 are constructed for γR = 1, 2, 2.5 and 3.5, respectively At certain values of frequency ω the cylinder enters the state of resonance. Fig. 6.16 illustrates this phenomenon; it is shown the change of the amplitude δ

24

1

12

2

3

β

4

0 0

π/2

π

∗ Fig. 6.15. Changes of quantity δ = cE 44 |u3 /Φ | on the contour of an opening for various values of parameter γR

6.4 Excitation of Shear Waves in an Inﬁnite Cylinder 4.6

247

Q*

2.3

γR

0.0 0.0

2.8

5.6

Fig. 6.16. Changes of the amplitude of relative total charge Q∗ = |Q/(ε11 Φ∗ )| on an electrode as a function of γR

(a)

(b)

(c)

Fig. 6.17a,b and c. The contour lines of quantity |u3 | at the area of a cylinder in the vicinity of the ﬁrst three natural frequencies of oscillation

248

6 Mixed Dynamic Problems

Fig. 6.18. Equipotentials in the area of a cylinder in the vicinity of the third eigenfrequency

(a)

(b)

(c)

Fig. 6.19a,b and c. The contour lines of the modulus of stress amplitude σ13 in the vicinity of the ﬁrst three eigenfrequencies

6.4 Excitation of Shear Waves in an Inﬁnite Cylinder

249

of the total charge Q∗ = |Q/ (ε11 Φ∗ )| on an electrode as a function of the normalized wave number γR in the vicinity of the ﬁrst three natural frequencies of oscillations. The calculations were carried out with the help of (6.9). Figure 6.17a,b and c show the contour lines of quantity |U3 | in the cylinder area and in the vicinity of three natural frequencies of oscillation (1) γ R ≈ 1.42 , γ (2) R ≈ 3.98, γ (3) R ≈ 5.25 , respectively. Figure 6.18 illustrates the exponentials in the vicinity of the third natural frequency. In all the calculations we have set β1 = 5π/14, β = 9π/14, β3 = 19π/14, β4 = 23π/14. Figure 6.19a,b and c and 6.20a,b and c show the contour line of the modulus of stress amplitudes σ13 and σ23 in the vicinity of the ﬁrst three eigenfrequencies of oscillations. Figure 6.21a and b illustrates contour lines of the modulus of amplitude of electric induction component D1 , and Fig. 6.21a and

(a)

(b)

(c)

Fig. 6.20a,b and c. The contour lines of the modulus of stress amplitude σ23 in the vicinity of the ﬁrst three eigenfrequencies of oscillations

250

6 Mixed Dynamic Problems

(a)

(b)

Fig. 6.21a and b. The contour lines of the modulus of the electric induction component D1 (Fig. 6.21a), D2 (Fig. 6.21b) amplitude in the vicinity of the third eigenfrequency

b show the behavior of components D2 in the vicinity of the third natural frequency. The dependence of total charge Q∗ = |Q/ (2π ε11 Φ∗ )| on an electrode on parameter λ = cos α characterizing the area of the electrodized coating is represented in Fig. 6.22. Curves 1, 2 and 3 correspond to β1 = −α, β2 = α, β3 = π − α, β4 = π + α, γR = 0, 1.2 and 1.3, respectively. The analogous result in statics, obtained in Fig. 6.22, is represented by dots [140]. Here, what interests is the consideration of the oscillations of the cylinder of a complicated form. Figure 6.23a and 6.23b show the distribution |U3 | in the case of an excitation by the electrodes, positioned on the rectangular areas of the boundary, for the normalized wave numbers γR = 2, 5 and 5 respectively;

6.0

Q*

4.5

3 3.0

2 1.5

0.0 0.00

1

λ 0.25

0.50

0.75

1.00

Fig. 6.22. Dependence of the total charge Q∗ = |Q/(2π ε11 Φ∗ )| on an electrode, on parameter λ = cos a, characterizing the area of an electrodized coating

6.5 A Hollow Cylinder

251

(b)

(a)

Fig. 6.23 a and b. Distribution |u3 | in the area of a cylinder with cross-section in the form of a “stadium” for various values of a normalized wave number

the cylinder area has cross-section in the form of a “stadium” with parametric equations ⎧ R 1 + e2iβ , −π/4 ≤ β ≤ π/4 ⎪ ⎪ ⎪ ⎨R (i + ctgβ) , π/4 < β ≤ 3π/4 ζ (β) = 2iβ ⎪ , 3π/4 < β ≤ 5π/4 −R 1 + e ⎪ ⎪ ⎩ −R (i + ctgβ) , 5π/4 < β ≤ 7π/4 Comparing Figs. 6.23a and 6.23b it is obvious that the displacement of the zones of the local extremums of quantity U3 is related to the frequency ω.

6.5 A Hollow Cylinder Let us now generalize the procedure presented in Sect. 6.4 for the calculation of coupled ﬁelds in a continuous cylinder for the case of a hollow cylinder, the cross-section of which is restrained by two arbitrary smooth contours C1 and C2 (see Fig. 6.24). On the free from mechanical forces outer and inner surfaces of the cylinder 2n1 and 2n2 electrodes are positioned with prescribed diﬀerences of the electric potential; the unelectrodized areas of the cylinder are bounded with air. The boundaries of the k-th electrode positioned on (m) (m) the contour Cm (m = 1, 2) are determined by β2k−1 and β2k (k = 1, 2n1 , if x2 С1 x1

O С2

Fig. 6.24. The cross-section of a hollow cylinder with electrodes

252

6 Mixed Dynamic Problems

m = 1; k = 1, 2n2 , if m = 2), and the electric potential on it is prescribed by (m) (m) −iωt . φk = Re Φk e The boundary conditions for mechanical and electric quantities on the surface of the hollow cylinder have the form of (6.23), where in this case Cφ deﬁnes the part of united contour C = C1 ∪ C2 , corresponding to the electrodized surface. The integral representations of the calculations are found in (6.15). Applying the standard procedure, and using (6.15) and boundary conditions (6.24), we come to the system of integrodiﬀerential (6.16), where the signs before the integrated members in the equations given on outer contour C1 , should be switched to the opposite ones. The expression for the determination of the displacement current on the kth electrode has the form of (6.19). With the help of (6.19) we may determine (m) the anti-resonance frequencies, at Ik (t) = 0. As an example let us consider a hollow cylinder (of P ZT − 4), the crosssection of which is bounded by two circular contours ζ = R1 eiβ , ζ ∗ = R2 eiβ +a, β ∈ [0, 2π]). The excitation of the cylinder is carried out by four electrodes, positioned in pairs on its outer and inner surfaces. we present the amplitude-frequency characteristics of Q∗ = In Fig. 6.25 (1) (1) (1) Q1 / ε11 Φ1 , characterizing the amplitude of total charge Q1 on electrode (m = k = 1). Curves 1 and 2 are constructed using a = 0, R2 /R1 = 0.5 (1) and 0.8, respectively. The potentials on the electrodes were set to Φ1 = (2) (1) (2) Φ2 = 1V, Φ2 = Φ1 = −1V . The position of the electrodes was ﬁxed by Q*

2

Q*

22

2

1

1

1

11

2

1

2 γ R1

0 0

2

4

γ R1

0 0

2

2

Figs. 6.25 and 6.26. Changes of the amplitude of relative total charge on an electrode as a function of a normalized wave number, for a hollow cylinder of circular cross-section (1) (2) (1) (2) (6.25 : Φ1 = Φ2 = Φ∗ , Φ2 = Φ1 = −Φ∗ ) (1) (2) (1) (2) (6.26 : Φ1 = Φ1 = Φ2 = Φ2 = −Φ∗)

6.5 A Hollow Cylinder

253

Figs. 6.27 and 6.28. The contour lines of the modulus of the displacement (m)

(m)

(m)

(m)

β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14 (m = 1, 2). (1) (2) (1) (2) The analogous results for the case of Φ1 = Φ1 = 1V, Φ2 = Φ2 = −1V are given in Fig. 6.26. Here what interests is the investigation of the inﬂuence of electric loading on the distribution of the mechanical quantities in the area of a hollow cylinder. Figures 6.27, 6.28 illustrate the contour lines of the modulus of the (m) (m) (m) displacement amplitude with respect to β1 = 5π/14, β2 = 9π/14, β3 = (m) (m) (m) (m) (m) 19π/14, β4 = 23π/14 and β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = (1) (2) 11π/6 (m = 1, 2). The values of electric potentials were set to Φ1 = Φ1 = (1) (2) 1V, Φ2 = Φ2 = −1V , and γR1 = 1.

Figs. 6.29 and 6.30. The contour lines of quantity |U3 |

254

6 Mixed Dynamic Problems

Fig. 6.31. The contour lines of quantity |U3 | in the area of an eccentric cylinder (1)

(2)

(1)

The contour lines of quantity |U3 | for cases Φ1 = −1V, Φ1 = 5V, Φ2 = (2) (1) (2) (1) (2) 1V, Φ2 = −5V and Φ1 = −5V, Φ1 = 1V, Φ2 = 5V, Φ2 = −1V are (m) (m) (m) = π/6, β2 = 5π/6, β3 = represented in Fig. 6.29 and 6.30 for β1 (m) 7π/6, β4 = 11π/6, γR1 = 3 (m = 1, 2). Figure 6.31 illustrates contour lines |U3 | in the area of an eccentric cylinder (1) (2) (1) (2) at γR1 = 1 for the values of potential Φ1 = Φ2 = 1V, Φ2 = Φ1 = −1V (the position of the electrodes is the same as in Fig. 6.27 and 6.28). Figure 6.32a and b show the contour lines of the modulus of displacement amplitude |U3 | in the case where the outer contour has and elliptic form, for (m) (m) (m) (m) (m) β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14 and β1 = (m) (m) (m) π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6 (m = 1, 2) respetively. Here we set γR = 1, R = 0.5 (R1 + R2 ), where R1 and R2 are the horizontal and vertical half-axes of an ellipse. The values of the potentials were chosen as (1) (2) (1) (2) Φ1 = Φ1 = 1V, Φ2 = Φ2 = −1V .

Fig. 6.32a and b. The contour lines of |U3 | in an elliptic cylinder with circular opening

6.6 A Halfspace with Tunnel Openings

255

Fig. 6.33a and b. The contour lines of |U3 | in an elliptic cylinder with a circular opening

Figure 6.33a and b show analogous results for a cylinder with a crosssection in the form of an extended along x2 -axis ellipse with a cut-out circle (for the same position of electrodes, as in Fig. 6.32a and b). The calculations (1) (2) (1) were carried out for parameters γR = 2 at Φ1 = −1V, Φ1 = 10V, Φ2 = (2) (1) (2) (1) 1V, Φ2 = −10V (Fig. 6.33a and b) and Φ1 = −10V, Φ1 = 1V, Φ2 = (2) 10V, Φ2 = −1V (Fig. 6.33a and b). From results it follows that the distribution of the displacement in the cylinder is inﬂuenced strongly by the frequency of excitation, sizes and position of the electrodes, and also the values of the given on them potentials.

6.6 A Halfspace with Tunnel Openings In order to investigate the inﬂuence of the boundary area on the behavior of the components of the electric ﬁeld let us consider the stationary dynamic problem of electroelasticity for a piezoceramic halfspace weakened by a tunnel cavity with a system of active surface electrodes. Let in the Cartesian system of coordinates Ox1 x2 x3 a piezoceramic halfspace weakened by a tunnel along the symmetry x3 axis of the material opening, the cross-section of which is bounded by arbitrary smooth contour C (Fig.6.34a). The boundaries of the k-th electrode are determined byβ2k−1 and β2k k = 1, 2n , and the electric potential on it is given by φ∗k = Re Φ∗k e−iωt . It is assumed that the cross-section of the cavity has a symmetry with respect to x2 , and the electrodes are weightless and their rigidity is negligible. The position of the electrodes cannot be quite arbitrary; the required conditions of matching will be indicated below.

256

6 Mixed Dynamic Problems X2

O

X1

Fig. 6.34a. A halfspace with a partially electrodized tunnel cavity

Consider two types of the boundary conditions on the boundary of halfspace x2 = 0: a) a halfspace rigidly ﬁxed and covered by grounded electrodes along the boundary (6.25) u3 = 0, φ = 0; b) a halfspace free from forces and bounded with vacuum σ23 = 0, D2 = 0.

(6.26)

Hence, the boundary problem of electroelasticity is reduced to the determination of functions U3 and F ∗ from the diﬀerential equations of Helmh¨ oltz and Laplace (6.5) and the boundary conditions (6.4), (6.25) or (6.26) To solve the above problem it is recommended to have integral representations of the solutions, satisfying conditions (6.25) or (6.26) and conditions of radiation at inﬁnity. Using the method of images let us represent the solution of the form 1 (1) (1) p (ζ) H0 (γ r) − AH0 (γ r1 ) ds, U3 (x1 , x2 ) = E c44 C ∂ F ∗ (x1 , x2 ) = f (ζ) ( nr − A nr1 ) ds, (6.27) ∂ nζ C r = |ζ − z| , r1 = ¯ ζ − z , ζ ∈ C. (1)

Here Hν (x) is the Hankel’s function of the ﬁrst kind and of ν-th order, ds is the element of an arc-length of contour C. The value A = −1 corresponds to the free- from forces halfspace-bounded by vacuum; A = 1 corresponds to the ﬁxed and covered by grounded electrodes of a half-space. For A = 0 we have an unbounded space with a tunnel cavity. Substituting the limiting values of functions (6.27) at z → ζ0 ∈ C into the boundary conditions (6.4) and integrating by parts we come to the system ofsingular integrodiﬀerential equations of the second type (6.7), where the ker-

6.6 A Halfspace with Tunnel Openings

257

nel gm (m = 1, 2, . . . , 5) and the right parts are determined by the expressions eiψ0 2 Re + γ [H1 (γ r0 ) cos (ψ0 − α0 ) π i ζ − ζ0 (1) −AH1 (γ r10 ) cos (ψ0 − α10 ) , 2 e15 k15 (1) (1) H g2 (ζ, ζ0 ) = g (ζ, ζ ) , g (ζ, ζ ) = (γ r ) − AH (γ r ) , 5 0 3 0 0 10 0 0 2 1 + k15 e15 iψ e Aeiψ df , (6.28) − , f (ζ) = g4 (ζ, ζ0 ) = Re ¯ ζ − ζ0 ds ζ − ζ0 iψ0 e Aeiψ0 g5 (ζ, ζ0 ) = Im + ¯ , ζ − ζ0 ζ − ζ0 N1 (ζ0 ) = 0, N2 (ζ0 ) = Φ∗ (ζ0 ) , r0 = |ζ − ζ0 | , α0 = arg (ζ − ζ0 ) , r10 = ¯ ζ − ζ0 , α10 = arg ζ¯ − ζ0 ,

g1 (ζ, ζ0 ) =

ψ = ψ (ζ) , ψ0 = ψ (ζ0 ) , ζ, ζ0 ∈ C. Here ψ is the angle between the normal to contour C and x1 -axis Φ∗ (ζ0 ) is the piecewise-constant function, determining the electric potential values on the system of electrodes. The kernels g2 (ζ, ζ0 ) , g5 (ζ, ζ0 ) are singular; the other kernels, due to the assumption that contour C is smooth, can not posses more than a weak singularity. In this case the amplitude of the density distribution of electric charges qk (β) on the k-th electrode reads iψ0 e Aeiψ0 ε ds, ζ0 ∈ Cφk , f (ζ)Im + ¯ (6.29) qk (β0 ) = − 11 ζ − ζ0 ζ − ζ0 C

where Cφk is the part of contour C, where the k-th electrode is positioned. By analogy, using (6.3) we ﬁnd the expression for the peak values of the electric ﬁeld component in the area of a piecewise-homogeneous halfspace. We have (1) (1) ∗ 2 γ p (ζ) H1 (γ r) cos α − AH1 (γ r1 ) cos α1 ds+ = 1 + k15 σ13 + e15 ∗ σ23

C

C

f (ζ)Im

2 = 1 + k15 γ

C

! 1 A + ¯ ds, ζ −z ζ −z

(1) (1) p (ζ) H1 (γ r) sin α − AH1 (γ r1 ) sin α1 ds+

258

6 Mixed Dynamic Problems

+ e15 C

f (ζ)Re

! A 1 + ¯ ds, ζ −z ζ −z

k2 γ (1) (1) p (ζ) H1 (γ r) cos α − AH1 (γ r1 ) cos α1 ds− E1∗ = − 15 e15 C ! 1 A − f (ζ)Im + ¯ ds, ζ−z ζ −z C k2 γ (1) (1) p (ζ) H1 (γ r) sin α − AH1 (γ r1 ) sin α1 ds− E2∗ = − 15 e15 C ! 1 A − f (ζ)Re + ¯ ds, ζ −z ζ −z C ! 1 A ∗ ε + D1 = − 11 f (ζ)Im ds, ζ − z ζ¯ − z C ! 1 A + ¯ D2∗ = − ε11 f (ζ)Re ds, ζ −z ζ −z C (6.30) α = arg (ζ − z) , α1 = arg ζ¯ − z , ζ ∈ C. Now consider the situation where the ﬁxed and grounded boundary x2 = 0 of a piezoceramic halfspace with tunnel openings is used as a generator of electric energy. In this case the mechanical excitation comes from two plane monochromatic shear waves, propagating in the positive and negative directions of x1 -axis having the following values of displacement amplitude u3 and electric potential φ: (1)

U3

Φ(j)

(2) = τ1 e−iγx1 − Ae−iγx1 , U3 = τ2 eiγx1 − Ae−iγx1 , e15 (j) = ε U3 (j = 1, 2) . 11

(6.31)

Here the value A = 1 corresponds to the ﬁxed halfspace with zero potential on the boundary, while the value A = 0 corresponds to the full space. For assume that the cross-section of the cavity has vertical and horizontal axes of symmetry and that on its surface there are two symmetrically positioned inﬁnitely long electrodes (Fig. 6.34b). To impose the diﬀerences of electric potentials 2V (t) under the deformation of the medium in (6.31) it is necessary to assume τ1 = −τ2 = τ . The generated energy is consumed in the outer electric circuit connecting the electrodes and as a model may can be modeled by losses on an element with conductivity Y (Fig. 6.34b). Following the procedurepresented

6.6 A Halfspace with Tunnel Openings Shear wave

259

Shear wave

Y

X1 ////////////////////////////////////////////////////////////////////////////////////////////

Fig. 6.34b. The scheme of generation of the diﬀerences of electric potentials on electrodes under the inﬂuence of monochromatic shear waves in a ﬁxed and grounded along the boundaries halfspace

in Sect. 6.1 we determine the unknown amplitude of potential V (t) on an electrode as iτ ω ε11 B1 V ∗ (ω) = , 2Y − iω ε11 B2 β2 Bm = Am (β0 ) s (β0 ) dβ0 (m = 1, 2) , (6.32) β1

Am (β0 ) = −

fm (ζ) Im

C

eiψ0 Aeiψ0 + ¯ ζ − ζ0 ζ − ζ0

ds.

Here the functions fm (ζ) (m = 1, 2) represent “standard” solutions of the system (6.7) with kernels (6.28) where the right parts of (6.7) are: (1)

N1 (ζ0 ) = 2iγcE 44 (1 + A) cos ψ0 cos γξ10 , 2e15 (1) N2 (ζ0 ) = ε i (1 + A) sin γξ10 , 11 (2)

N1 (ζ0 ) = 0, 1, β1 < β0 < β2 , (2) N2 (ζ0 ) = ζ = ξ10 + i ξ20 ∈ C, −1, β3 < β0 < β4 , 0

(6.33)

* 3.8 Q

A=1 0 –1 2.4

1.0 0.0

γR 1.5

3.0

Fig. 6.35. Changes of the amplitude of relative total charge on an electrode as a function of a normalized wave number for various types of boundary conditions on the boundary of a halfspace

260

6 Mixed Dynamic Problems 50

μ

25 A=1

0

0 6π/7

π

–1

β

Fig. 6.36. The distribution intensity of electric charges on an electrode for various types of boundary conditions on the boundary of a halfspace

(a)

(b)

(c)

Fig. 6.37a,b and c. The contour lines of the modulus of the shear displacement amplitude in the vicinity of a circular opening with two electrodes in: a) a space (A = 0), b) a free halfspace (A = −1) and c) a ﬁxed halfspace (A = −1)

6.6 A Halfspace with Tunnel Openings

261

where βk k = 1, 4 denotes the position of the electrodes. As a ﬁrst example consider a halfspace (of P ZT − 4 ceramics) with circular opening ζ = Reiβ + ih (β ∈ [0, 2π]), excited by two electrodes with the diﬀerence of the amplitude of electric potentials 2Φ∗ positioned symmetrically with respect to x2 -axis (β1 = −π/7, β2 = π/7, β3 = 6π/7, β4 = 8π/7). Figure 6.35, shows the change of quantity Q∗ = |Q1 /(ε11 Φ∗ )| characterizing the amplitude of total electric charge Q1 on the electrode as a function of normalized wave number γR for various variants of the edge conditions on the boundary of halfspace (h/R = 2.5). It is seen that in the case of a ﬁxed halfspace (A = 1) the quantity Q∗ may exceed its static analogue by 26%. The inﬂuence of the inertial eﬀect in the space is negligible.

(a)

(b)

(c) ∗ Fig. 6.38a,b and c. The contour lines of |σ13 | in the vicinity of a circular opening with two electrodes in: a) a space (A = 0) b) a free halfspace (A = −1) and c) a ﬁxed halfspace (A = 1)

262

6 Mixed Dynamic Problems

Figure 6.36 depicts the behavior of the quantity μ = |q2 (β) / (ε11 Φ∗ )| on the electrode at h/R = 1.5, γR = 1 for various values of the identiﬁcator of boundary conditions A. As it follows from the last singular equation in (6.7) and expression (6.29), the intensity of distribution of the charges (the normal component of the electric induction vector) has singularities of root type on the edges of the electrodes, which is also conﬁrmed by the curves in Fig. 6.36. Figure 6.37a,b and c illustrates the contour lines of the modulus of displacement amplitude |U3 | in the area covering the opening, for various conditions on boundary x2 = 0 at γR = 1, h/R = 7.5. The lighter zones correspond to the maximum values of quantity |U3 |. Figure 6.37a,b and c show analogous results for the values of parameter A = 0, 1 and −1, respectively. ∗ ∗ | and |σ23 | in the The distribution of the modulus of stress amplitudes |σ13 close and far regions at γR = 1, h/R = 7.5 for values A = 0, 1 and −1 are

(a)

(b)

(c) ∗ Fig. 6.39a,b and c. The contour lines of |σ23 | in the vicinity of a circular opening with two electrodes in: a) a space (A = 0), b) a free halfspace (A = −1) and c) a ﬁxed halfspace (A = 1)

6.6 A Halfspace with Tunnel Openings 6 Q* 1

6 Q* 3

A=1

A=1 0

0 –1

–1

4

2

263

4

0

1

γR 2

2

0

γR 2

1

Fig. 6.40a and b. Changes of the amplitude of relative total charge Q∗1 = |Q1 / (ε11 V )| and Q∗3 = |Q3 / (ε11 V )| as a function of the normalized wave number for various types of boundary conditions on the boundary of the halspace Φ∗1 = V, Φ∗2 = −V, Φ3 = 100V, Φ∗4 = −100V

(a)

(b)

(c)

Fig. 6.41a,b and c. The contour lines of the modulus of the shear displacement amplitude in the vicinity of a circular opening with four electrodes in: a) a space (A = 0), b) a free halfspace (A = −1) and c) a ﬁxed halfspace (A = 1)

264

6 Mixed Dynamic Problems

represented in Figs. 6.38a,b and c and 6.39 a, b, c, respectively. Here it should be mentioned, that under static conditions (ω = 0) the electric loading of the medium under an antiplane deformation do not cause mechanical stresses in it. Now, consider the case of excitation of coupled ﬁelds by four electrodes, the position of which is ﬁxed by quantities βk = (2k − 1) π/8 (k = 1, 8). Figures 6.40a and b and 6.40a and b show respectively the behavior of quantities Q∗1 = |Q1 / (ε11 V )|, and Q∗3 = |Q3 / (ε11 V )| far and near to the boundary of the halfspace electrodes, with respect to γR for various variants of the edge conditions on the boundary of halfspace (h/R = 2.5). On the electrodes the potentials were prescribed as follows Φ∗1 = V, Φ∗2 = −V, Φ∗3 = V, Φ∗4 = −V . ∗ The results for the distribution of the contour lines of quantities |U3 | , |σ13 | ∗ and |σ23 | in the vicinity of a circular opening are given in Figs. 6.41a, b, c; 6.42a, b, c and 6.43a, b, c at γR = 1, h/R = 7.5, Φ∗1 = V, Φ∗2 = −V, Φ∗3 = −V, Φ∗4 = V . Figures 6.44 a and b illustrates the contour lines of quan∗ ∗ tities |σ13 | and |σ23 | for a free halfspace in the case of Φ∗1 = V, Φ∗2 = −V, Φ∗3 = −V, Φ∗4 = V at γR = 1.

(a)

(b)

(c) ∗ Fig. 6.42a,b and c. The contour lines of |σ13 | in the vicinity of a circular hole with four electrodes in a) a space (A = 0) b) a free halfspace (A = −1) and c) a ﬁxed halfspace (A = 1)

6.6 A Halfspace with Tunnel Openings

(a)

265

(b)

(c) ∗ Fig. 6.43a,b and c. The contour lines of |σ23 | in the vicinity of a circular hole with four electrodes in a) a space (A = 0) b) a free halfspace (A = −1) and c) a ﬁxed halfspace (A = 1)

(a)

(b)

∗ ∗ Fig. 6.44 a and b. Contour lines of |σ13 | and |σ23 | respectively in the vicinity of a circular hole containing four electodes for a free halfspace for (Φ∗1 = V, Φ∗2 = −V, Φ∗3 = −V, Φ∗4 = V )

266

6 Mixed Dynamic Problems

The changes of the modulus of amplitude on the electrode with respect to the electrical potential V ∗ = |ε11 V ∗ /τ e15 | as a function of γR under the inﬂuence of the harmonic waves of (6.31) type are given for the values of A = 0 and 1, respectively, in Fig. 6.45a and 6.45b (h/R = 2.5). The calculations were carried out with the help of (6.32) for the “no-load” mode (in that case the electrodes are disconnected). Curves 1–3 correspond to the following variants of the distribution of the electrodes: β1 = −π/7, β2 = π/7, β3 = 6π/7, β4 = 8π/7; β1 = −π/4, β2 = π/4, β3 = 3π/4, β4 = 5π/4 and β1 = −π/3, β2 = π/3, β3 = 2π/3, β4 = 5π/3. The analysis of the results show that the most eﬃcient electroacoustic transformation of the energy is observed at the smallest area of the electrodized coating, and in a halfspace it is considerably higher than in the full space. For example, comparing curves 1 in Fig. 6.45 and 6.45b we observe that the maximum value of quantity V ∗ in a halfspace exceeds almost two times the similar value in case of a full space. From the results it follows that under the condition of reverse piezoelectric eﬀect the distribution of mechanical quantities in a halfspace changes considerably according to the boundary conditions on and the prescribed electric potentials on the system of the electrodes. Here it should be mentioned that, as the reﬂected (by the boundary of the halfspace) coupled wave ﬁeld from the boundary of a half-space introduces additional charges on the paired electrodes (connected to a separate generator), the latter should be positioned symmetrically with respect to axis x2 (a case when the centers of the electrodes lie on this axis, are obviously excluded). In that case the system of integrodiﬀerential equations becomes unsolvable. The constructed algorithm may be generalized in the case of n-tunnel openings Cm m = 1, n with cross-sections of canonic form, if their centers of symmetry are positioned on x2 - axis, and the electrodes are also positioned 2.7

1

5.4

1

2

3

3 1.8

3.6

0.9

1.8

0.0

γR 0

1

2

3

2

γR

0.0 0

1

2

3

Fig. 6.45a and b. Changes of the modulus of relative electric potential on an electrode according to the normalized wave number in case of: a) a space (A = 0) b) a space (A = 1)

6.7 A Layer

267

symmetrically with respect to this axis. For this purpose, in (6.7), we assume n " Cm . p (ζ) = {pm (ζ) , ζ ∈ Cm } , f (ζ) = {fm (ζ) , ζ ∈ Cm } , C = m=1

6.7 A Layer Let a piezoceramic layer (0 ≤ x1 ≤ a, −∞ < x2 < ∞, −∞ < x3 < ∞) in the Cartesian system of coordinates Ox1 x2 x3 weakened by a tunnel along x3 -axis opening, the cross-section of which is bounded by smooth contour C (Fig. 6.46a). Assume that the basis of the layer are free from forces and bounded with vacuum (the direction of polarization of the ceramics is parallel to x3 -axis). On the free from mechanical stresses surfaces of the opening2n thin electrodes are positioned, with prescribed diﬀerences of the electric potential, and the unelectrodized areas of the opening are bounded by vacuum (air). of the k-th electrode are determined by β2k−1 The boundaries and β2k k = 1, 2n , and the electric potential on it is prescribed by quantity φ∗k = Re Φ∗k e−iωt . The position of the electrodes and the conﬁguration of the cavity cannot be arbitrary and the imposed on them requirements will be given below. The mechanical and electric boundary conditions at the bases of the layer are formally represented in the form σ13 = 0, D1 = 0 (x1 = 0, a) .

(6.34)

The boundary conditions (6.4) remain valid on the surface of the cavity. In order to solve the stated problem it is recommended to have integral representations of the solutions satisfying conditions (6.34) as well the conditions of radiation at inﬁnity. Having that in mind, let us write the Green’s functions for a homogeneous piezoceramic layer.

X2

O

X1

Fig. 6.46a. A layer with a partially electrodized tunnel cavity

268

6 Mixed Dynamic Problems

The boundary problems (6.5), (6.34) may be written as ∇2 U3 + γ 2 U3 = 0; ∂ 1 U3 = 0 (x1 = 0, a) , 2

∗

∇ F = 0, ∂ 1 F = 0, (x1 = 0, a) .

(6.35) (6.36)

The Green’s function corresponding to problem (6.35) is represented by formulas (4.82), (4.83). The expression for the Green’s function of problem (6.36) is changed and written in the form of |x2 − ξ2 | 1 π (ζ + z¯) π (ζ − z) E (ζ, z) = − +

n 4 sin sin , 2a 2π 2a 2a ∇2 E = δ (x1 − ξ11 , x2 − ξ2 ) = δ (x1 − ξ1 ) δ (x2 − ξ2 ) , z = x1 − ix2 , ζ = ξ1 + iξ2 ,

(6.37)

where δ (x) − 2a is the periodical Dirac’ δ-function. Using the Green’s function we write the integral representation of the solution in the form U3 (x1 , x2 ) = p (ζ)G (ζ, z) ds, C ∗

F (x1 , x2 ) =

f (ζ) C

∂ E (ζ, z) ds, ζ ∈ C. dnζ

(6.38)

Here ds is the element of the arc length of contour C. Expression (6.38) satisfy both the boundary conditions (6.34) on the bases of the layer, and the conditions of radiation at inﬁnity. Taking into account (6.37) the representation for function F ∗ (x1 , x2 ) is transformed into the form (6.39) F ∗ (x1 , x2 ) = f (ζ) K (ζ, z)ds, C

! π (ζ + z¯) sin ψ 1 π (ζ − z) iψ sign (x2 − ξ2 ) + Re e + ctg K (ζ, z) = ctg . 2a 4a 2a 2a Here ψ = ψ (ζ) is the angle between the normal to contour C and Ox1 -axis, at ζ = C. Using Sohotsky-Plemmely formulas and the decomposing into partial fractions ∞ 2x # 1 1 + ctgπ x = πx π m=1 x2 − m2

6.7 A Layer

269

the expression for the limiting values of the appearing in (6.39) integrals with the kernels of Hilbert type at z → ζ0 ∈ C read ⎧ ⎫± ⎨ π (z − ζ) ⎬ π (ζ0 − ζ) dζ dζ, (6.40) f (ζ) ctg = ±2iaf (ζ0 ) + f (ζ) ctg ⎩ ⎭ 2a 2a C

⎧ ⎨ ⎩

C

C

⎫ ⎬± π z−ζ π ζ0 − ζ dζ dζ. f (ζ) ctg = ±2iaf (ζ0 ) + f (ζ) ctg ⎭ 2a 2a C

Diﬀerentiating function F ∗ (x1 , x2 ) in (6.38) we get $ ¯ ∂F∗ π iψ 2 π (ζ − z) −iψ 2 π ζ +z f (ζ) e sec sec = −e ds, (6.41) ∂z 16a2 2a 2a C $ π ∂F∗ −iψ 2 π ζ −z iψ 2 π (ζ + z) = − e sec ds. f (ζ) e sec ∂z 16a2 2a 2a C

At z → ζ0 ∈ C the integrals in (6.41) become diverging. To regulate them it is necessary to integrate by parts allowing for the conditions of periodicity function f (z). Substituting the limiting values of functions (6.38), (6.39) and their derivatives at z → ζ0 ∈ C under the boundary conditions (6.4) and taking into account (6.40) we get a system of singular integrodiﬀerential equations of the second kind p (ζ0 ) + p (ζ) g1 (ζ, ζ0 ) ds + f (ζ)g2 (ζ, ζ0 ) ds = N1 (ζ0 ) , C

1 − f (ζ0 ) + 2

C

{p (ζ) g3 (ζ, ζ0 ) + f (ζ) g4 (ζ, ζ0 )} ds = N2 (ζ0 ), ζ ∈ Cφ , C

f (ζ)g5 (ζ, ζ0 ) ds = 0, ζ0 ∈ C\Cφ ,

C

% &$ π ζ0 + ζ¯ 1 π (ζ0 − ζ) iψ0 g1 (ζ, ζ0 ) = Re e + ctg + P1 eiψ0 + P2 e−iψ0 , ctg 2a 2a 2a 2e15 g (ζ, ζ0 ) , 2 ) 5 (1 + k15 π ζ + ζ 0 π (ζ − ζ0 ) 1 e15 |ξ20 − ξ2 | +

n 4 sin sin g3 (ζ, ζ0 ) = ε − + 11 2a 2π 2a 2a $ ∞ 1 iγ|ξ20 −ξ2 | 1 # + e − cm (ξ20 − ξ2 ) cos αm ξ1 cos αm ξ10 , 2iaγ a m=1 g2 (ζ, ζ0 ) =

cE 44

270

6 Mixed Dynamic Problems

% &$ π ζ + ζ¯0 1 π (ζ − ζ0 ) iψ g4 (ζ, ζ0 ) = ctg Re e + ctg 4a 2a 2a sin ψ sign (ξ20 − ξ2 ) , 2a % &$ π ζ + ζ ) 1 π (ζ − ζ 0 0 Im eiψ0 ctg + ctg , g5 (ζ, ζ0 ) = 4a 2a 2a +

1 1 (A0 − iB0 ) , P2 = −S − (A0 − iB0 ) , a a 1 iγ|ξ2 −ξ20 | , sign (ξ2 − ξ20 ) 1 − e S= 2ia ∞ # A0 = β1k αk cos αk ξ1 sin αk ξ10 ,

P1 = S −

B0 =

k=1 ∞ #

β0k sign (ξ20 − ξ2 ) cos αk ξ1 cos αk ξ10 ,

k=1

1 −αk |ξ2 −ξ20 | 1 e − m e−λk |ξ2 −ξ20 | , m αk λk 1 −λm |ξ20 −ξ| 1 −αm |ξ20 −ξ2 | cm (ξ20 − ξ2 ) = e − e , λm αm N1 (ζ0 ) = 0, N2 (ζ0 ) = Φ∗ (ζ0 ) , βmk =

ψ = ψ (ζ) , ψ0 = ψ (ζ0 ) , ζ, ζ0 ∈ C.

(6.42)

Here Φ∗ (ζ0 ) is a piecewise-constant function, determining the value of electric potential on the system of electrodes. The kernels g2 (ζ, ζ0 ) , g5 (ζ, ζ0 ) are singular (of Hilbert type). Here it should be mentioned, that the appearing in the process of oscillation, shear waves reﬂected from boundary x1 = 0 and x1 = a cause additional charges on the active electrodes. Therefore the conﬁguration of the section of cavity, its position, and also the position of paired electrodes (powered from a separate generator) should have certain symmetry with respect to the bases, i.e. the applied on the indicated electrodes charges over the absolute quantity should be the same. If this requirement is violated the system (6.42) becomes unsolvable. The amplitude of the density distribution of electric charges qk (β) on the k-th electrode reads % &$ π ζ + ζ0 ε11 π (ζ − ζ0 ) iψ0 + ctg ds f (ζ)Im e ctg qk (β0 ) = − 4a 2a 2a C

ζ0 ∈ Cφk ,

(6.43)

where Cφk is the part of contour C, where the k-th electrode is positioned.

6.7 A Layer

271

Now consider the case, where a piezoceramic layer with a tunnel opening is used as a generator of electric energy. In this case, the mechanic excitation comes from two plane monochromatic shear waves, propagating in the positive and negative directions of x2 -axis having the following values of displacement amplitude u3 and electric potential φ, respectively: (1)

U3

Φ(j)

(2)

= τ1 e−iγx2 , U3 = τ2 eiγx2 , e15 (j) = ε U3 (j = 1, 2) . 11

(6.44)

We assume that the cross-section of the cavity has a vertical axis of symmetry and on its surface two symmetrically positioned inﬁnitely long electrodes are positioned (Fig. 6.46b). In order to sustain the diﬀerence of electric potential 2V (t) under the deformation of the medium electric charges of opposite signs should appear on the electrodized coatings, which require the matching of the displacement amplitudes in monochromatic waves. Due to this in (6.44) we have to set τ1 = −τ2 = τ . As a result the unknown potential amplitude V (t) on the electrode read V ∗ (ω) = β2 Bm =

iτ ω ε11 B1 , 2Y − iω ε11 B2 Am (β0 ) s (β0 ) dβ0 (m = 1, 2) ,

β1

1 Am (β0 ) = − 4a

fm

C

(ζ) Im e

(6.45)

&$ π ζ − ζ0 π (ζ − ζ0 ) + ctg ds. ctg 2a 2a

% iψ0

X2

Shear wave

X1

Shear wave

Fig. 6.46b. The generation of the diﬀerence of electric potentials on electrodes under the inﬂuence of monochromatic shear waves in a piece-wise homogeneous layer

272

6 Mixed Dynamic Problems

where the functions fm (ζ) (m = 1, 2) are “standard ” solutions of system (6.42) where the right parts are given by: (1)

N1 (ζ0 ) = 4iγ cos γξ20 sin ψ0 , 2ie15 (1) N2 (ζ0 ) = ε sin γξ20 , 11

(6.46)

(2)

N1 (ζ0 ) = 0, (2)

N2 (ζ0 ) =

1, β1 < β0 < β2 , −1, β3 < β0 < β4 ,

ζ0 = ξ10 + iξ20 ∈ C,

where the quantities βk k = 1, 4 prescribe the position of the electrodes. As a ﬁrst example consider a layer (of P ZT − 4 ceramics) with a circular cavity of radius R excited by two electrodes, the centers of which are positioned on its vertical diameter (β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14). Figure 6.47 depicts the the change of quantity Q∗ = |Q/ (ε11 Φ∗ )|, characterizing the amplitude of total electric charge Q on an electrode is shown, with respect to the normalized wave numbers γa (2Φ∗ is the diﬀerence of the amplitude of electric potential on electrodes). Curve 1 corresponds to the opening, displaced from the axis of symmetry of the layer at a distance of 0.1a; curve 2 corresponds to the symmetrically positioned opening (R/a = 0.1). In the ﬁrst case it is seen that due to the inertial eﬀect, the quantity Q∗ may exceed its static analogue by 16%. Here we should note that on exceeding wave number with values αm = mπ/a (m = 1, 2, . . .) the solution is destabilized to a new running wave, carrying the energy along the wave guide from the heterogeneity to inﬁnity. This circumstance provides a characteristic “breakwise” form of the curves in the vicinity of points γ = π and γ = 2π (a = 1). 4.4

Q*

1 2 3.3

γa

2.2 0

4

8

Fig. 6.47. Changes of the modulus of the relative total charge amplitude on an electrode as a function of γα in case of symmetrical and asymmetrical position of a circular opening (the centers of the electrodes lie on the vertical diameter)

6.7 A Layer 6

273

Q*

3

0

γa 0

6

12

Fig. 6.48. Amplitude frequency characteristics of quantity Q∗ at β1 = −π/7, β2 = π/7, β3 = 6π/7 and β4 = 8π/7 (the centers of the electrodes lie on the horizontal diameter of the opening) 6

Q*

3

0

γa 0

6

12

Fig. 6.49. Amplitude frequency characteristics of quantity Q∗ at β1 = −3π/28, β2 = 11π/28, β3 = 17π/28 and β4 = 25π/28 6

Q*

3

0

γa 0

6

12 ∗

Fig. 6.50. Amplitude frequency characteristics of quantity Q at β1 = 3π/28, β2 = 11π/28, β3 = 31π/28 and β4 = 39π/28

274

6 Mixed Dynamic Problems 14

η

1 3

7 2

0 π/2

π

β

∗ Fig. 6.51. Changes of quantity η = cE 44 |u3 /Φ | on the contour of symmetrically positioned circular cavity for various γα

Quite diﬀerent picture is observed if the centers of two active electrodes lie on the horizontal diameter of symmetrically positioned openings (β1 = −π/7, β2 = π/7, β3 = 6π/7, β4 = 8π/7). In this case, as can be seen in Fig. 6.48, we observe the phenomenon of resonance. The values of the normalized wave numbers corresponding to the ﬁrst and second natural frequencies of oscillations are approximately equal: γ(1) a ≈ 2.95 and γ(2) a ≈ 8.69. The anti-resonance frequency, at which the current in the generator circuit is ∗ a ≈ 3.1. In the calculations we set R/a = 0.1. zero, is equal γ(1) The resonances also occur in situations where the centers of the electrodes are positioned on straight lines, inclined to the horizontal diameter 42

η

1

3 21

2

0

0

π/2

β

∗ Fig. 6.52. Changes of quantity η = cE 44 |u3 /Φ | on the contour of symmetrically positioned circular cavity for various γα

6.7 A Layer

(a)

275

(b)

Fig. 6.53 a and b. The contour lines of the modulus of the displacement amplitude in a layer with a circular opening

at an angle of 45◦ . The graphs of the quantities Q∗ at R/a = 0.1, β1 = 3π/28, β2 = 11π/28, β3 = 17π/28, β4 = 25π/28, β1 = 3π/28, β2 = 11π/28, β3 = 31π/28, β4 = 39π/28 are represented in Figs. 6.49 and 6.50, respectively. In these cases the resonance frequencies are determined at γ(1) a ≈ 3.01, γ(2) a ≈ 8.79 and γ(1) a ≈ 3.02, γ(2) a ≈ 8.85, respectively. ∗ Figures 6.51 and 6.52 illustrate the change of η = cE 44 |U3 /Φ | on the contour of symmetrically positioned circular cavity (R/a = 0.1). Curves 1–3 in Fig. 6.51 were obtained setting β1 = −π/7, β2 = π/7, β3 = 6π/7, β4 = 8π/7, γa = 0, 3.14 and 6.28, respectively; in Fig. 6.52 they were obtained for the same values γa and β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14.

(a)

(b)

Fig. 6.54 a and b. The contour lines of the modulus of the displacement amplitude in a layer with circular opening

276

6 Mixed Dynamic Problems

The investigation of mechanical quantities in the area of a piecewisehomogeneous layer at electric excitation of an electroelastic ﬁeld is of interest. Figure 6.53a and 6.53b show the contour lines of the modulus of the displacement amplitude in a layer with a circular cavity for R/a = 0.05, γa = 3.14 and 6.28, respectively (β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14). The analogous results for the same values of parameters and β1 = −π/7, β2 = π/7, β3 = 6π/7, β4 = 8π/7 are given in Fig. 6.54a and b. Fig. 6.55a, b and c depict the distribution |U3 | in the vicinity of resonance frequencies (γ(1) a = 2.95, γ(2) a = 8.69) and antiresonance frequencies ∗ γ(1) a = 3.1 at R/a = 0.1, respectively for the same case of disposition of the electrodes. In Figs. 6.56 and 6.57 the contour lines (U3 ) are constructed for β1 = 3π/28, β2 = 11π/28, β3 = 17π/28, β4 = 25π/28 and β1 = 3π/28,

(b)

(a)

(c)

Fig. 6.55a, b and c. The contour lines of the modulus of the displacement amplitude in a layer with a circular opening in the vicinity of resonance frequency

6.7 A Layer

(a)

277

(b)

Fig. 6.56. The contour lines of the modulus of the displacement amplitude in a layer with a circular opening in the vicinity of the ﬁrst resonance frequency

β2 = 11π/28, β3 = 31π/28, β4 = 39π/28 for the ﬁrst two resonance frequencies respectively. Now consider the case of excitation of oscillation by fourelectrodes, the displacement of which is ﬁxed by βk = (2k − 1) π/8 k = 1, 8 . In Fig. 6.58 the curves 1, 2 and 3, characterizing the change of η = |u cE 3 /V | on the contour of the symmetrically positioned elliptic cavity, are 44 constructed for γa = 0, 6.28 and 10, respectively, at R1 /a = 0.1, R1 /R2 = 2 and Φ∗1 = V, Φ∗2 = −V, Φ∗3 = −V, Φ∗4 = V (R1 and R2 are horizontal and vertical half axes of an ellipse). Figure 6.59a and 6.59b show the distribution |U3 | in a layer with an opening of elliptic cross-section for values of potentials Φ∗1 = V, Φ∗2 = −V,

(a)

(b)

Fig. 6.57a and b. The contour lines of the displacement amplitude in a layer with a circular opening in the vicinity of the ﬁrst resonance frequency

278

6 Mixed Dynamic Problems 13.0

η 1 2

3 6.5

0.0

π/2

0

β

∗ cE 44 |u3 /Φ |

Fig. 6.58. Changes of quantity η = on the surface of an elliptic cavity for various values of γα at excitation of the ﬁelds by four electrodes

Φ∗3 = V, Φ∗4 = −V and Φ∗1 = V, Φ∗2 = −V, Φ∗3 = −V, Φ∗4 = V , respectively. We set γa = 9, R1 = 0.1, R1 /R2 = 2. Figure 6.60 depicts the case of an asymmetrically positioned opening (γa = 13, R2 /a = 0.1, R1 /R2 = 0.5). Figure 6.61a illustrates the changes of the modulus of the amplitude, concerning electric potential V ∗ = |ε11 V ∗ /τ e15 | on the electrode as a function of γa in case of diﬀraction of monochromic waves of (6.44) type on the symmetrically positioned elliptic cavity (R1 /R2 = 2). The calculations were

(a)

(b)

Fig. 6.59a and b. The contour lines |u3 | of the modulus in a piece-wise homogeneous layer at excitation of the oscillations by four electrodes

6.7 A Layer

279

Fig. 6.60. The contour lines |u3 | of the modulus in a layer with asymmetrically positioned opening at excitation of the oscillations by four electrodes

carried out with the help of (6.45) for the “no-load” mode (the electrodes are disconnected). Curves 1–3 satisfy the following variants of the disposition of electrodes: β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14; βk = (2k − 1) π/4 k = 1, 4 , and β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6. The analogous results for a case with an opening displaced from the axis 3

3

1

1 2

2 3

2

1

1

0

3

2

γa 0

4

8

12

0

γa 0

4

8

12

Fig. 6.61a and b. Changes of generalized on electrodes potentials V ∗ = |ε11 V ∗ /τ e15 | as a function of the normalized wave number for various areas of an electrodized coating at symmetrically and assymetrically positioned elliptic opening in a layer

280

6 Mixed Dynamic Problems

of symmetry of the layer at distance 0.1a, are given in Fig. 6.61a and b (R1 /R2 = 2). The analysis of the results shows that the most eﬃcient electroacoustic transform of energy in the considered interval of frequencies is observed at the smallest area of the electrodized coating.

6.8 Interaction of a Partially Electrodized Opening and Crack Up to now the behaviour of the dynamic stress intensity factor (SIF) was investigated on the tip of a crack under the mechanical loading (direct piezoeﬀect). Below we will investigate the behaviour of the SIF at the harmonic with time electric excitation by the system of electrodes. In the Cartesian system of coordinates Ox1 x2 x3 consider a piezoceramic space containing tunnel along axis x3 opening and curvilinear crack L. On the free from the mechanical forces opening surface there are placed 2n inﬁnitely long in the direction of axis x3 thin electrodes with given diﬀerences of the electric potential. The unelectrodized portions of the opening surface are bounded with vacuum (air) boundaries of the k-th electrode are determined by quantities β2k−1 and β2k k = 1, 2n , and the electric potential on it is prescribed by quantity φ∗k = Re Φ∗k e−iωt . The relative position of the heterogeneities, their conﬁgurations, and also the position of the surface electrodes should satisfy certain requirements which will be indicated below. Assuming that the edges of the crack are free from mechanical stresses, we will represent the mechanical and electric boundary conditions on contour L as usually ±

(σ13 cos ψ + σ23 sin ψ) = 0. Es+

=

Es− ,

Dn+

=

Dn− .

(6.47) (6.48)

Here Es and Dn are a tangential component of the vector of electric strength and a normal component of the vector of electric induction, respectively; ψ is the angle between the normal to left edge L and axis Ox1 ; the signs “plus” and “minus” refer to the left and right edges of the section at its movement from its beginning a to end b (Fig. 6.62). Taking into account complex representations (6.3) the boundary conditions on the surfaces of the opening and crack we will represent in the form ∂ E 2 c44 1 + k15 U3 + e15 F ∗ = 0 on C, ∂n e15 F ∗ + ε U3 = φ∗ (ζ ∗ ) , ζ ∗ ∈ Cφ , 11 ∂F ∗ Dn∗ = − ε11 = 0 on C\Cφ , ∂n ± ∂ E 2 c 1 + k15 U3 + e15 F ∗ = 0 on L, ∂n 44

(6.49)

6.8 Interaction of a Partially Electrodized Opening and Crack

281

b

X2

L X1

O + –

C

a

Fig. 6.62. A body with a partially electrodized hole and a curvilinear crack

where Cφ is the part of contour C, corresponding to the electrodized surface of the opening. Now assume (1) i ∂H0 (γr) (1) ∗ U3 (z) = p (ζ )H0 (γr1 ) ds − [U3 ] ds, 4 ∂nζ C L ! dU3 ∂ e15 ∗ ∗ F (z) = f (ζ )

nr1 ds + arg (z − ζ) ds, (6.50) ∂nζ ∗ 2π ε11 ds C

L

∗

r = (z − ζ), r1 = (ζ ∗ −ζ), ζ ∈ L, ζ ∈ C. Integral representations (6.50) provide a displacement jump and continuation of the stress vector on L, and also the automatic satisfaction of electric conditions (6.48). Substituting the limiting values of function (6.50) and their derivatives at z → ζ0 ∈ L and z → ζ0∗ ∈ C under boundary conditions (6.49) we come to the system of singular integrodiﬀerential equations of the second kind ∗ ∗ ∗ ∗ 2ip (ζ0 ) + p (ζ )g1 (ζ , ζ0 ) ds + f (ζ ∗ )g2 (ζ ∗ , ζ0∗ ) ds+

C

!

C

dU3 g3 (ζ, ζ0∗ ) ds + [U3 ]g4 (ζ, ζ0∗ ) ds = 0, ds L L ∗ ∗ ∗ ∗ − π f (ζ0 ) + p (ζ )g5 (ζ , ζ0 ) ds + f (ζ ∗ )g6 (ζ ∗ , ζ0∗ ) ds+

+

!

C

C

dU3 g7 (ζ, ζ0∗ ) ds + [U3 ]g8 (ζ, ζ0∗ ) ds = Φ∗ (ζ0∗ ) , ζ0∗ ∈ Cφ , ds C C ! dU3 ∗ ∗ ∗ f (ζ ) g9 (ζ , ζ0 ) ds + g10 (ζ, ζ0∗ )ds = 0, ζ0∗ ∈ C\Cφ , ds +

C

L

282

C

6 Mixed Dynamic Problems

p (ζ ∗ ) g11 (ζ ∗ , ζ0 ) ds +

f (ζ ∗ ) g12 (ζ ∗ , ζ0 ) ds +

C

L

! dU3 g13 (ζ, ζ0 )ds+ ds

[U3 ]g14 (ζ, ζ0 ) ds = 0,

+

(6.51)

L

where kernels gm g1 (ζ ∗ , ζ0∗ ) = g2 (ζ ∗ , ζ0∗ ) =

m = 1, 14 are determined by the following expressions

eiψ10 2 Re ∗ + γH1 (γr0 ) cos (ψ10 − α10 ) , πi ζ − ζ0∗

eiψ10 e15 1 eiψ10 Im , g3 (ζ, ζ0∗ ) = , Im ∗ ∗ 2 2 2π (1 + k15 ) ζ − ζ0∗ + k15 ) ζ − ζ0

cE 44 (1 2

iγ (1) H2 (γr20 ) cos (ψ + ψ10 − 2α20 ) − H0 (γr20 ) cos (ψ − ψ10 ) , 8 e15 (1) eiψ1 g5 (ζ ∗ , ζ0∗ ) = ε H0 (γr10 ) , g6 (ζ ∗ , ζ0∗ ) = Re ∗ , 11 ζ − ζ0∗ e15 ie15 (1) α20 , g8 (ζ, ζ0∗ ) = γH1 (γr20 ) cos (ψ − α20 ) , g7 (ζ, ζ0∗ ) = 2π ε11 4 ε11 g4 (ζ, ζ0∗ ) =

g9 (ζ, ζ0∗ ) = Im

eiψ10 e15 eiψ10 ∗ , g (ζ, ζ ) = − Im , 10 0 ε ζ ∗ − ζ0∗ 2π11 ζ − ζ0∗

eiψ0 2 Re ∗ + γH1 (γr30 ) cos (ψ0 − α30 ) , πi ζ − ζ0 eiψ0 eiψ0 e15 1 Im Im , g (ζ, ζ ) = , g12 (ζ ∗ , ζ0 ) = E 13 0 2 ) 2 ) ζ ∗ − ζ0 2π (1 + k15 ζ − ζ0 c44 (1 + k15 iγ 2 (1) H2 (γr0 ) cos (ψ + ψ0 − 2α0 ) − H0 (γr0 ) cos (ψ − ψ0 ) , g14 (ζ, ζ0 ) = 8 2i 4i (1) (1) H1 (x) = + H1 (x) , H2 (x) = + H2 (x) , πx πx2 r0 = (ζ0 − ζ), α0 = arg (ζ0 − ζ) , r10 = (ζ ∗ −ζ0∗ ), α10 = arg (ζ ∗ − ζ0∗ ) , r20 = (ζ0∗ − ζ), α20 = arg (ζ0∗ − ζ) , r30 = (ζ ∗ −ζ0 ), α30 = arg (ζ ∗ − ζ0 ) , g11 (ζ ∗ , ζ0 ) =

ψ = ψ (ζ) , ψ1 = ψ (ζ ∗ ) , ψ0 = ψ (ζ0 ) , ψ10 = ψ (ζ0∗ ) , ζ, ζ0 ∈ L, ζ ∗ , ζ0∗ ∈ C.

Here ψ and ψ1 are the angles between the normals contours L and C and axis Ox1 , respectively; Φ∗ (ζ0∗ ) are piecewise-constant functions, assigning the amplitude values of the electric potentials on the electrodes. For the simple solvability of system (6.51) in the class of functions with derivatives unbounded in the vicinity of the tips of crack L, it is necessary to consider it together with the additional condition. ! dU3 ds = 0, (6.52) ds L

6.8 Interaction of a Partially Electrodized Opening and Crack

283

expressing the equality to zero of the jumps of displacement in the tips L. Besides, condition (6.52) provides the uniqueness of the integral representations of function F ∗ (z) in (6.50). It is necessary to mention here that as the appearing in the process of oscillation reﬂected from the crack electroelastic waves introduce additional charges on the paired electrodes, the position of the latters, and also the relative position of the opening and the crack and their conﬁguration should provide the similarity of the additional charges according to the absolute value. Otherwise system (7.51) becomes unsolvable. Having determined functions [U3 ] , p (ζ ∗ ) and f (ζ ∗ ) from system (6.51), according to formulas (6.3) with the help of representations (6.50) we may determine all the components of the electroelastic ﬁeld in a piecewisehomogeneous space. Introducing the parameterization of contour C with the help of equality ζ ∗ = ζ ∗ (β) , ζ0∗ = ζ ∗ (β0 ) (0 ≤ β, β0 ≤ 2π) we will ﬁnd the expression for the density amplitude of distribution of electric charges qk (β) on the k-th electrode. Taking into account the fact that the opening is bounded with vacuum we will write ∗

qk (β) = Dn(k) (β) , β2k−1 < β < β2k .

(6.53)

(k)∗

Here Dn (β) is the amplitude of the normal component of the vector of electric induction on the position of the opening surface covered with k-th electrode. Using integral representations (6.50) for function F ∗ (z) we ﬁnd eiψ10 ε qk (β0 ) = − 11 f (ζ ∗ )Im ∗ ds, ζ0∗ ∈ Cφk , (6.54) ζ − ζ0∗ C

where Cφk is the part of contour C, where the k-th electrode is positioned. Integrating expression (6.54) over variable β0 in the limits from β2k−1 to β2k , we will obtain the amplitude value of total charge Qk of k-th electrode, referring to the unity of its length. He current ﬂowing through the given electrode and equal to the conductance current in the generator circuit, we may be determined over formula (6.10). To determine stress intensity factor KIII we will obtain the main asymptotics of the shear stress on the continuation across the crack tip. We proceed from formula (4.16), determining the behaviour of the integrals of Cauchy type in the vicinity of the ends L in case when the density has the power singularity. From the asymptotic analysis of the latter in (6.51) of the singular integrodiﬀerential equation in the vicinity of tip it follows that σ = 1/2. Therefore, introducing the parameterization of crack contour ζ = ζ (δ) we may have ! ds Ω0 (δ) dU3 √ , s (δ) = = > 0, −1 ≤ δ ≤ 1, (6.55) 2 ds dδ s (δ) 1 − δ

284

6 Mixed Dynamic Problems

where function Ω0 (δ) is continuous according to H¨ older. Here we have (leaving only terms that contribute ε to asymptotics) ! ∂U3 E iψc ∂U3 −iψc ∂U3 σn = Re Sn e−iωt , Sn = cE + . . . = c + e e + ..., 44 44 ∂n ∂z ∂ z¯ (6.56) where c is the cut tip, ψc = ψ (c). On the basis of (6.50) we will write out the main part of function (6.56) ! dU3 cE eiψc 44 0 Sn = ds. (6.57) Im 2π ds ζ−z L

Using asymptotic formulas (4.16) from (6.57) we ﬁnd Ω0 (±1) ds Sn0 = ±cE (±1) = . , s 44 dδ δ=±1 3 2r∗ s (±1)

(6.58)

Here r∗ = (z − c), the lower sign refers to tip c = a, the upper one to c = b. Proceeding from (6.58) we ﬁnd stress intensity factor √ cE π ± 44 0 ∗ KIII = im Re Ω0 (±1) e−iωt . 2πr σn = ± (6.59) r ∗ →0 2 s (±1) The asymptotics of the normal component of the vector of electric induction on the continuation across the cut tip are as follows Re Ω0 (±1) e−iωt . (6.60) Dn = D1 cos ψ (±1) + D2 sin ψ (±1) = ±e15 2 2r∗ s (±1) The other electric values in the vicinity of L are limited. As an example consider a piezoceramic space (the material is P ZT − 4), containing an opening of elliptic cross-section and a crack, the contour of which is parabolic. Assume, that the excitation of the space is carried out by two electrodes with the diﬀerence of potential amplitude 2Φ∗ . The parametric equation of contours L and C, respectively, have the form ζ = δeiϑ (p1 + ip2 δ) + h, δ ∈ [−1, 1] , ζ ∗ = R1 cos β + iR2 sin β, β ∈ [0, 2π] ,

(6.61)

where ϑ is the angle characterizing the orientation of the crack in the space. The solution of the system of integrodiﬀerential (6.51) together with (6.52) taking into account (6.61) was carried out over the scheme of the method of quadratures (Appendix , Par. B.1, Par. B.2). The behaviour of quantity Q∗ = Q (ε11 Φ∗ ) ((Q is the amplitude of the total charge on an electrode)) in the function of normalized wave number γR are represented in Fig. 6.63. Curve 1 is constructed for the values of parameters

6.8 Interaction of a Partially Electrodized Opening and Crack 3.4

285

Q*

1 2.2 2

γR

1.0 0.0

1.5

3.0

Fig. 6.63. The relative total charge as a function of the normalized wave number (β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14) ±

1.0

2 1

1 0.5

γR

0.0 0.0

1.5

3.0

Fig. 6.64. The relative stress intensity factor as a function of the normalized wave number (β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14) 6.4

η±

1

1 2

3.2

0.0 0.0

γR 1.5

3.0

Fig. 6.65. Quantity η ± = arg(Ω0 (±1)) as a function of the normalized wave number (β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14)

286

6 Mixed Dynamic Problems Q*

15

8 2 1

γR

1 0.0

1.5

3.0

Fig. 6.66. The relative total charge as a function of the normalized wave number (β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6)

R1 /R2 = 1, p1 /R1 = 1, p2 /R1 = 0, h/R1 = 3, ϑ = 0, β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14; curve 2 is constructed for those values besides p1 /R1 = 3, ϑ = π/2 (R = 0.5 (R1 + R2 ) , 2 is the cut length). In Figs. 6.64 and 6.65 are'given the relations of the relative stress in ± tensity factor < KIII >= cE (2e15 (Φ∗ )) and η ± = 44 π s (±1) Ω0 (±1) arg (Ω0 (±1)) from γR for the same values of the parameters and in the same correspondence as in Fig. 6.62. The solid lines correspond to tip a, the dashed ones to tip b. ± ) the stress intensity factor may be determined by Knowing quantity (KIII formula e15 (Φ∗ ) ( ± ) ± KIII cos (ωt − arg Ω0 (±1)) . =± √ (6.62) KIII

±

6

2 3

1 0 0.0

1

γR 1.5

3.0

Fig. 6.67. The relative stress intensity factor as a function of the normalized wave number (β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6)

6.8 Interaction of a Partially Electrodized Opening and Crack

287

η±

6.4

1

1

3.2 2

γR

0.0 0.0

1.5

3.0

±

Fig. 6.68. Quantity η = arg(Ω0 (±1)) as a function of the normalized wave number (β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6) Q*

3.6

1 2 2.7

γR

1.8 0.0

1.5

3.0

Fig. 6.69. The relative total electric charge on the electrodes as a function of the normalized wave number for various electrode positions ±

1.2

1 1 0.6 2 2

γR

0.0 0.0

1.5

3.0

Fig. 6.70. The relative stress intensity factor as a function of the normalized wave number for various electrode positions

288

6 Mixed Dynamic Problems

For the case of the larger area of the electrodized coating (β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6) the analogous results of the calculations in Figs. 6.66–6.68. Curves 1 and 2 correspond to parameters R1 /R2 = 1, p1 /R1 = 1, p2 /R1 = 0, h/R1 = 3, ϑ = 0 and ϑ = π/2. ± Changes of Q∗ and < KIII > as a function of γR in case, when the centers of two active electrodes do not lie on axis x2 are shown in Figs. 6.69 and 6.70. Curves 1 and 2 are constructed for parameters R2 /R1 = 1, p1 /R1 = 1, p2 /R1 = 0, h/R1 = 3, ϑ = 0, β1 = 3π/28, β2 = 11π/28, β3 = 45π/28, β4 = 53π/28 and β1 = 17π/28, β2 = 25π/28, β3 = 31π/28, β4 = 39π/28, respectively. ∗ Figure 6.71 illustrates the changes of value λ = cE 44 ([U3 ] /Φ ), characterizing the jump of the displacement on the crack for various values of the curve parameter at R2 /R1 = 0.5, p1 /R1 = 2, h/R1 = 3, γR = 1, ϑ = π/2 (β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14). Curves 1, 2 and 3 satisfy values p2 /R1 = 0, 2 and 4, respectively. The behaviour of the mechanical quantities in the area of a piecewisehomogeneous space is of interest. The line of the equal modulus of the displacement amplitude in the area covering the crack and the opening are represented in Fig. 6.72 (R2 /R1 = 1, p1 /R1 = 0.5, h/R1 = 2, γR = 1), Fig. 6.73 (R2 /R1 = 2, p1 /R1 = 2, h/R1 = 4, γR = 1) and Fig. 6.74 (R2 /R1 = 0.5, p1 /R1 = 1, h/R1 = 3, γR = 0.6). In the calculations we assumed β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14. From the represented results of the calculations it follows that the behaviour of the electric and mechanical quantity substantially depends on the frequencies of the harmonic loadings, relative position and conﬁguration of 14

λ 2

1

7

3

δ

0 –1

0 ∗ cE 44 |[U3 ]/Φ |,

1

Fig. 6.71. The changes of quantity λ = that characterizes the displacement jump on the crack for various values of crack curvature

6.8 Interaction of a Partially Electrodized Opening and Crack

289

Fig. 6.72. The contour lines of the amplitude of displacements in a partially homogenous space for various values of frequency as well as relative positions of the defects

the heterogeneities, and also on the position and sizes of the surface electrodes. The availability of the crack may considerably increase the dynamic eﬀect. For example, as it follows from Fig. 6.66, quantity Q∗ , characterizing the total electric charge on the electrode, may exceed its static analogue 2.9 times as large (curve 2). In the absence of the crack this excess is only 9

Fig. 6.73. The contour lines of the amplitude of displacements in a partially homogenous space for various values of frequency as well as relative positions of the defects

290

6 Mixed Dynamic Problems

Fig. 6.74. The contour lines of the amplitude of displacements in a partially homogenous space for various values of frequency as well as relative positions of the defects

per cent. It should be mentioned that in statics (ω = 0) the electric loading of the piezoceramic medium under the condition of antiplane deformation does not cause in it mechanical stresses, and therefore factor KIII in this case is equal to zero.

6.9 An Opening Strengthened by a Rigid Stringer Consider the analogous problem for a medium containing tunnel opening C and thin rigid inclusion L (stringer). The excitation of the oscillation is carried out by the diﬀerence of electric potential applied on 2 electrodes, positioned on the opening surface. Assuming that the stringer is ﬁxed, let us represent the mechanical and electric boundary conditions on contour L as follows u± 3 = 0. Es+

=

Es− , Dn+

(6.63) =

Dn− .

(6.64)

Here Es and Dn are the tangential component of the vector of electric strength and normal component of the vector of electric induction, respectively, the signs “plus” and “minus” refer to the left and right edges of inclusion L at its movement from its beginning a to the end b (Fig. 6.75).

6.9 An Opening Strengthened by a Rigid Stringer

291

b

x2

L

x1

O +

C

–

a

Fig. 6.75. A medium containing a partially electrodized hole and a curvilinear stringer

To obtain the eﬃcient boundary condition (6.63) from the point of view of the numerical realization of the system of integral equations it is recommended to diﬀerentiate over arc abscissa s ± ∂u3 =0 (6.65) ∂s The boundary condition on the surface of the partially electrodized opening have the form (6.4). To bring the considered boundary problem of electroelasticity to the integral equations let us represent the sought-for functions u3 and F in the form ⎫ ⎧ ⎬ ⎨ i (1) (1) ∗ U3 (x1 , x2 ) = E q (ζ) H (γr) ds+ p (ζ ) H (γr ) ds , 1 0 0 2 ) ⎩ ⎭ 4c44 (1 + k15 L C 1 ∗ ∗ ∂ ln r1 ds, F (x1 , x2 ) = − f (ζ ) (6.66) 2π ε11 ∂n C

∗

r = |ζ − z| , r1 = |ζ − z| , ζ ∈ L, ζ ∗ ∈ C. (1)

Here Hν (x) is the Hankel function of the ﬁrst kind of order ν, ds is the element of the arc length contour over which the integration is carried out. Integral representations (6.66) satisfy diﬀerential (6.5) and electric conditions (4.65) on insert L, and also support the fulﬁllment of condition [U3 ] = U3+ − U3− = 0 in (6.64). Substituting the limiting values of functions (6.67) and their derivatives at z → ζ0 ∈ L and z → ζ0∗ ∈ C into boundary condition (6.4), (6.65), we come to the system of integrodiﬀerential equations of the second kind q (ζ) G1 (ζ, ζ0 ) ds + p (ζ ∗ ) G2 (ζ ∗ , ζ0 ) ds = 0, ζ0 ∈ L, L

C

∗

f (ζ )G5 (ζ

+ C

∗

, ζ0∗ ) ds

− 2p (ζ0∗ ) = 0, ζ0∗ ∈ C,

292

6 Mixed Dynamic Problems

f (ζ ∗ ) G6 (ζ ∗ , ζ0∗ ) ds = 0, ζ0∗ ∈ C\Cφ ,

C

q (ζ)G7 (ζ, ζ0∗ ) ds

L

∗

p (ζ )G8 (ζ

+

∗

, ζ0∗ ) ds

C

1 + f (ζ0∗ ) = Φ (ζ0∗ ) , ζ0∗ ∈ Cφ , 2 ε11 G1 (ζ, ζ0 ) = γH1 (γr0 ) sin (ψ0 − α0 ) −

+

f (ζ ∗ )G9 (ζ ∗ , ζ0∗ ) ds+

C

eiψ0 2i Im , π ζ − ζ0

(1)

G2 (ζ ∗ , ζ0 ) = γH1 (γr10 ) sin (ψ0 − α10 ) , (1)

G3 (ζ, ζ0∗ ) = iγH1 (γr20 ) cos (ψ10 − α20 ) , G4 (ζ ∗ , ζ0∗ ) = iγH1 (γr30 ) cos (ψ10 − α30 ) + G5 (ζ ∗ , ζ0∗ ) = −

2e15 eiψ10 Im ∗ , ε π 11 ζ − ζ0∗

eiψ10 2 Re ∗ , π ζ − ζ0∗

eiψ10 , − ζ0∗ 2 ik15 (1) G7 (ζ, ζ0∗ ) = 2 ) H0 (γr20 ) , 4e15 (1 + k15 2 ik15 (1) G8 (ζ ∗ , ζ0∗ ) = 2 ) H0 (γr30 ) , 4e15 (1 + k15

G6 (ζ ∗ , ζ0∗ ) = Im

G9 (ζ ∗ , ζ0∗ ) = −

ζ∗

1 eiψ1 Re , 2π ε11 ζ ∗ − ζ0∗

2i (1) + H1 (x) , r0 = |ζ − ζ0 | , r10 = |ζ ∗ − ζ0 | , πx r20 = |ζ − ζ0∗ | , r30 = |ζ ∗ − ζ0∗ | , α0 = arg (ζ − ζ0 ) , α10 = arg (ζ ∗ − ζ0 ) , α20 = arg (ζ − ζ0∗ ) , α30 = arg (ζ ∗ − ζ0∗ ) , H1 (x) =

ψ0 = ψ (ζ0 ) , ψ10 = ψ1 (ζ0∗ ) ; ζ, ζ0 ∈ L; ζ ∗ , ζ0∗ ∈ C.

(6.67)

Here ψ and ψ1 are the angles between the normals to the contours L and C and the axis Ox1 , respectively; Φ∗ (ζ0∗ ) is the piecewise-constant function assigning the value of the amplitude of electric potential on the electrodized portions of the opening surface. It is necessary to mention that, as the appearing in the process of oscillation of reﬂected from the inclusion of electroelastic waves bring the additional charges on the paired electrodes, the position of the latter, and also the relative position of the opening and inclusion and their conﬁguration should provide the similarity of the additional charges (according to absolute value). Otherwise system (6.67) becomes unsolvable.

6.9 An Opening Strengthened by a Rigid Stringer

293

Consider the behaviour of the electric ﬁeld in the vicinity of the inclusion. From integral representation (6.66) for the displacement amplitude we obtain equality ! ∂U3 E 2 q (ζ) = c44 1 + k15 , (6.68) ∂n where the square brackets deﬁne a jump of the corresponding quantity on L. From equation of state (4.22) and relation (6.64) it follows (6.69) σn = Re Tn e−iωt , ! ! ! ! ∂U ∂Φ ∂U ∂Φ e 3 15 3 [Tn ] = cE + e15 , = ε . 44 ∂n ∂n ∂n 11 ∂n From expressions (6.68), (6.69) we obtain the equality q (ζ) = [Tn ] .

(6.70)

Thus, on the basis of (6.70) function q (ζ) may be expressed as the intensity of contact forces of interaction of a rigid inclusion and piezomedium. Therefore, for the equilibrium of the inclusion there should be fulﬁlled the following equality q (ζ) ds = 0.

(6.71)

L

By asymptotic analysis of singular integral equations in the vicinity of the tops of the inclusion on the line of integration it is possible to show that on ends L function q (ζ) has singularities of root type. Thus, condition (6.71) must 3.0

Q*

2 1 2.2

γR

1.4 0.0

1.5

3.0

Fig. 6.76. The relative total electrical charge on the electrode as a function of the normalized wave number (h/R1 = 1, 5)

294

6 Mixed Dynamic Problems 3.2

Q* 2

2.3

1

γR

1.4 0.0

1.5

3.0

Fig. 6.77. The relative total electrical charge on the electrode as a function of the normalized wave number (h/R1 = 3)

be considered as an additional during the solution of the system of singular integrodiﬀerential (6.67) in the class of function, unbounded on ends L. Due to (4.22), (6.64) and (6.65) we have ! 2 e15 ∂U3 k15 (6.72) [Ds∗ ] =ε11 [Es∗ ] = 0, [En∗ ] = − ε =− 2 ) e q (ζ) , 11 ∂n (1 + k15 15 where the asterisk deﬁnes the amplitude of the corresponding value. 100

λ

2 3 50

1

4

δ

0 –1

0

1

Fig. 6.78. Quantity λ (intensity of contact stresses) as a function of δ. Curves 1–4 represent diﬀerent normalized wave numbers (γR) for the case of a straight inclusion

6.9 An Opening Strengthened by a Rigid Stringer

295

Proceeding from (6.72) we may conclude that the vector of electric induc→ − → − tion D continue across L, and the vector of electric strength E undergoes breaks on the insert. For example, let us ﬁnd the density amplitude of position of electric charges ρk (β) on the k-th electrode. Introducing the parameterization of the contour C with the help of the equalities ζ ∗ = ζ ∗ (β) , ζ0∗ = ζ ∗ (β0 ) (0 ≤ β, β0 ≤ 2π) and taking into account that the opening is bounded with vacuum we may write down (6.73) ρk (β) = Dn(k) (β) , α2k−1 < β < α2k . (k)

Here Dn (β) represents the amplitude of the normal component of the electric induction vector on the corresponding area of contour C covered with electrodes. Using integral representation (6.66) of function F ∗ (x1 , x2 ) we ﬁnd eiψ10 ε ρk (β0 ) = − 11 f (ζ ∗ )Im ∗ ds, ζ0∗ ∈ Cφk . (6.74) ζ − ζ0∗ C

Here Cφk is the part of the contour C where k-th electrode is placed. To determine the concentrations of shear stresses near the opening we will calculate stress σs = σ23 cos ψ1 − σ13 sin ψ1 on its surface. Taking into account (4.22) and equations of electrostatics → − div D = 0, → − E = −gradφ.

100

(6.75)

λ 3 2

50

0 –1

1

δ 0

1

Fig. 6.79. Quantinty λ as a function of δ. Curves 1–4 represent diﬀerent values of normalized wave numbers (γR) for the case of a parabolic inclusion

296

6 Mixed Dynamic Problems

we will have ∂U3 ∂F ∗ 2 σs = Re Ts e−iωt , Ts (ζ0∗ ) = cE + e15 . 44 1 + k15 ∂s ∂s

(6.76)

Here, by partial derivatives from the corresponding quantities are understood their limiting values at z → ζ0∗ from the area of the body. From (6.76) and representations (6.66) we ﬁnd Ts (ζ0∗ ) = q (ζ)g1 (ζ, ζ0∗ ) ds + p (ζ ∗ )g2 (ζ ∗ , ζ0∗ ) ds+ + C

L

C

e15 ∗ f (ζ ∗ )g3 (ζ ∗ , ζ0∗ ) ds + f (ζ0 ) , 2 ε11

iγ (1) H (γr20 ) sin (ψ10 − α20 ) , 4 1 iγ (1) g2 (ζ ∗ , ζ0∗ ) = − H1 (γr30 ) sin (ψ10 − α30 ) , 4 e15 eiψ10 Re ∗ . g3 (ζ ∗ , ζ0∗ ) = − ε 2π 11 ζ − ζ0∗

g1 (ζ, ζ0∗ ) = −

(6.77)

The appearing here quantities ψ10 , r20 , r30 , α20 , α30 are determined in (6.67). 11.0

η 1 2

5.5

3

4 0.0

0

π/2

β

Fig. 6.80. Quantity η (module of displacement amplitude) on the contour of an elliptic hole with two electrodes as a function of β. Curves 1–4 are plotted for diﬀerent values of normalized wave number (γR)

6.9 An Opening Strengthened by a Rigid Stringer

297

Formulas (6.77) allow investigating the concentration of stresses according to the frequency of the harmonic excitation, conﬁguration of a cross-section opening and inserting, quantity and position of the active surface electrodes. Consider a piezoceramic space (the material is P ZT − 4), containing an opening of elliptic cross-section and an inclusion, the contour of which is parabolic. The parametric equations of contours L and C have the form ζ = δeiϑ (p1 + ip2 δ) + h, δ ∈ [−1, 1] , ζ ∗ = R1 cos β + iR2 sin β, β ∈ [0, 2π] ,

(6.78)

where ϑ is the angle characterizing the orientation of the stringer in a space. Assume that the excitation of the medium is carried out by two surface electrodes with the diﬀerence of the amplitude of potentials 2Φ∗ , the centers of which lie on axis (β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14). Investigate the inﬂuence of the dynamic eﬀect on the behaviour of the total electric charges on an electrode in case of an opening interacting with linear stringer (p2 /R1 = 0). In Fig. 6.76 there is shown the behaviour of quantity Q∗ = (Q/ (ε11 Φ∗ )) (Q is the total electric charge on an electrode) in the function of normalized wave number γR. Curves 1 and 2 are constructed for the values of parameters R2 /R1 = 1, h/R1 = 1.5, ϑ = π/2, p1 /R1 = 1 and 3; respectively, (R = 0.5 (R1 + R2 )). The analogous graphs for the same values of the parameters, beside h/R1 = 3, are represented in Fig. 6.77. The dashed lines here refer to the case, when the inclusion is absent. Quantity Q was calculated with the help of formula (6.74). 24

η

2 3

1

12

0

0

π/2

β

Fig. 6.81. Quantity η (module of displacement amplitude) on the contour of an elliptic hole with two electrodes as a function of β. Curves 1–4 are plotted for diﬀerent values of curvature

298

6 Mixed Dynamic Problems

Investigate the intensity of contact forces on an insert according to different parameters. In Fig. 6.78 there is represented the change of quantity λ = (q (δ) /Φ∗ ) due to the prescribed on two surface electrodes the diﬀerence of potentials 2Φ∗ . The calculation is carried out for elliptic opening (R1 /R2 = 2) with linear inclusion at p1 /R1 = 2, h/R1 = 1.5, ϑ = π/2. Curves 1–4 are constructed for values γR = 0, 1, 2 and 3, respectively. Change λ on the contour of a parabolic inclusion is illustrated in Fig. 6.79 by curves 1,2,3 for values p2 /R1 = 0, 1.5, 3, respectively at γR = 0.6, R1 /R2 = 2, p1 /R1 = 3, h/R1 = 2.5, ϑ = π/2. In Fig. 6.80 are represented the data of calculations characterizing the ∗ distribution of quantity η = cE 44 |U3 /Φ | on the opening contour with linear and parabolic inclusions, respectively. Curves 1–4 in Fig. 6.80 are constructed for the values of normalized wave number γR = 0, 1, 2 and 3 at R1 /R2 = 2, p2 /R1 = 2, h/R1 = 1.5, ϑ = π/2. Lines 1–3 in Fig. 6.81 correspond to value p1 /R1 = 3, R1 /R2 = 2, h/R1 = 2.5, γR = 0.6, ϑ = π/2, p2 /R1 = 0, 1.5 and 3. It should be mentioned here that at ϑ = 0 a linear insert at the given symmetrically positioned two electrodes does not cause disturbance into the electroelastic state of the medium with an opening. The calculation shows that in this case q (ζ) ≡ 0. The investigation of the behaviour of the mechanical quantities at electric excitation of a piecewise-homogeneous medium is of interest. The lines of the equal modulus of the displacement amplitude in the area covering a circular tunnel opening and a linear stringer are represented in Figs. 6.82

Fig. 6.82. The contour lines of the modulus of displacement amplitude in a medium containing a circular hole and a straight stringer (γR = 1, β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14)

6.9 An Opening Strengthened by a Rigid Stringer

299

Fig. 6.83. The contour lines of the modulus of displacement amplitude in a medium containing a circular hole and a straight stringer (γR = 1, β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6)

(β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14) and 6.83 (β1 = π/6, β2 = 5π/6,β3 = 7π/6, β4 = 11π/6) at p1 /R = 2, h/R = 4, γR = 1. The more light areas correspond to the maximum values of quantity |U3 |. Figure 6.84 illustrates contour lines |U3 | in the vicinity of elliptic opening (R1 /R2 = 2)

Fig. 6.84. The contour lines of the modulus of displacement amplitude in a medium containing a elliptic hole and a straight stringer (γR = 2, β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14)

300

6 Mixed Dynamic Problems

and a stringer for the values of parameters corresponding to Fig. 6.82 and γR = 2. From the represented results it is obvious that the availability of an inclusion may increase the inﬂuence of the dynamic eﬀect on the behaviour of the total charge on the electrodes. For example, as it follows from Fig. 6.77 quantity Q∗ may be greater than its static analogue by 17% (curve 2). In the absence of the inclusion the dynamic eﬀect is only 9% per cent. As it follows from Figs. 6.82–6.84, the ﬁxed rigid stringer prevents the propagation of the oscillations of the medium.

7 Harmonic Oscillations of Continuous Piezoceramic Cylinders with Inner Defects (Antiplane Deformation)

In the present chapter we deal with the problem of harmonic oscillations of continuous cylinders weakened by inner defects of crack and linear inclusion type under the conditions of direct and reverse piezoeﬀect. We derive analytical algorithms in the form of a system of singular integral and integrodiﬀerential equations, permitting the investigation of the amplitude-frequency characteristics of piecewise-homogeneous cylinders.

7.1 A Cylinder Weakened by Tunnel Cracks (Direct Piezoeﬀect) In the Cartesian system of coordinates Ox1 x2 x3 consider a continuous piezoceramic cylinder along x3 - axis, the cross-section of which is restrained by an outer contour C with a tunnel along the cracks elements, Lj (j = 1, 2, . . . , k). Assume that on the outer boundary of the cylinder, which is covered with thin grounded electrodes, a vector of stresses of longitudinal shear Zn = Re Ze−iωt (considered to be independent of the x3 coordinate) is applied. On the edges of the cracks-cuts act also harmonic with time self-balanced ± = Re X3± e−iωt . shear forces X3n Providing that the direction of the electric ﬁeld of preliminarily polarized ceramics is parallel to x3 -axis, the curves of contours C and Lj , and also the amplitudes of shear forces Z (x1 , x2 ) and X3 (x1 , x2 ) satisfy the H¨ older condition and besides ∩Lj = ∅, C ∩ Lj = ∅. In order to solve the antiplane electroelasticity problem we will use (4.25), (4.29), with the help of which the mechanical and electromagnetic quantities may be expressed by the displacement u3 and the harmonic functions Φ. Under the quasistatic approximation, the problem is reduced to the determination of the displacement amplitude and the function Φ from the diﬀerential (4.46) augmented with the boundary conditions on the surface of the cylinder and the cracks.

302

7 Harmonic Oscillations

The electric boundary conditions on the outer surface of the cylinder and cracks Lj are given by φ = 0 (Es = −∂ φ/∂ s = 0) on C,

(7.1)

Es+

(7.2)

=

Es− ,

Dn+

=

Dn−

on Lj (j = 1, 2, . . . , k) .

Here, φ is the potential ﬁeld; Es and Dn are the tangential component of the vector of electric strength and the normal component of the vector of electric induction, respectively; s is the arc abscissa. The “plus” and “minus” signs refer to the left and right edges of crack Lj during its movement from its beginning aj to the end bj (Fig. 7.1). We seek the functions of U3 and F in the following form [191] (1) 1 ∂ H0 (γ r) (1) ∗ dζ [U3 ] U3 (x1 , x2 ) = p (ζ )H0 (γ r1 ) ds − 4 ∂ζ C L (1) ∂ H0 (γ r) ¯ − dζ , ∂ ζ¯ ⎧ ⎫

⎨ ⎬ dU3 e15 1 F (x1 , x2 ) = nrds + f (ζ ∗ ) nr1 ds , (7.3) ε ⎭ π 11 ⎩ 2 ds L

r = |ζ − z| , ζ ∈ L = ∪Lj ,

C

∗

r1 = |ζ − z| ,

z = x1 + ix2 ,

ζ ∗ ∈ C,

(1)

where Hν (x) is the Hankel function of the ﬁrst kind and of order ν; the square brackets denote a jump of the corresponding quantity on L; ds is the element of the contour arc-length, over which the integration is carried out. The integral representations (7.3) of the solutions are correct if they satisfy the diﬀerential (4.46) which provide existence of a displacement jump U3 on the cracks, continuity of the stress vector during crossing Lj , and also the automatic fulﬁllment of conditions (7.2). The densities [U3 ] , p (ζ) and f (ζ ∗ ) appearing in (7.3) are determined from the mechanical boundary conditions

bj – + x2

C

aj

Lj

O x1

Fig. 7.1. The scheme of cross-section of a cylindrical with cracks

7.1 A Cylinder Weakened by Tunnel Cracks (Direct Piezoeﬀect)

303

on the contour C and Lj , and also from the electric conditions (7.1). Taking into account (4.25), (4.29) the later reads + + iψ ∂ U3 + ∂ U3 ∂F E 2 −iψ iψ − ie15 e +e c44 1 + k15 e ∂ ζ∗ ∂ ζ∗ ∂ ζ¯∗ + + + ∂F ∂ U3 ∂ U3 ie15 −iψ iψ −iψ −e −e = Z, ε e (7.4) ∂ ζ∗ ∂ ζ¯∗ ∂ ζ¯∗ 11

+ iψ ∂ U3 + ∂F E 2 + e +e = 0, c44 1 + k15 e ∂ζ ∂ ζ¯∗ + + + ∂ U3 ∂F ∂F iψ −iψ +e−iψ − e − ie e = X3 . 15 ∂ζ ∂ ζ¯ ∂ ζ¯ iψ

∂F ∂ ζ∗

+

−iψ

Here the derivatives of the functions U3 and F are calculated at their limiting values at z → ζ ∗ ∈ C and z → ζ ∈ L of the body; ψ = ψ (ζ) and ψ1 = ψ1 (ζ ∗ ) denote the angles between x1 -axis and the normals to the contour Lj and C, respectively. The second condition in (7.4) is for the zero equality of the tangential component of the vector of the electric strength on the electrodized surface of the cylinder. Due to the fact that the forms (7.3) provide the continuity of the stress vector on the crack, the mechanical boundary condition may be satisﬁed only on one of the edges (e.g. on the left). Substituting the limiting values of functions (7.3) into boundary conditions (7.4) we get a system of three integrodiﬀerential equations of the second kind

dU3 (7.5) g1 (ζ, ζ0 ) + [U3 ] g2 (ζ, ζ0 ) ds+ ds L + {p (ζ ∗ ) g3 (ζ ∗ , ζ0 ) + f (ζ ∗ ) g4 (ζ ∗ , ζ0 )}ds = N1 (ζ0 ) , C

p (ζ0∗ ) + +

L

{p (ζ ∗ ) g7 (ζ ∗ , ζ0∗ ) + f (ζ ∗ ) g8 (ζ ∗ , ζ0∗ )}ds = N2 (ζ0∗ ) ,

C

− f (ζ0∗ ) + + C

dU3 g5 (ζ, ζ0∗ ) + [U3 ] g6 (ζ, ζ0∗ ) ds+ ds

L

dU3 g9 (ζ, ζ0∗ ) + [U3 ] g10 (ζ, ζ0∗ ) ds+ ds

{p (ζ ∗ ) g11 (ζ ∗ , ζ0∗ ) + f (ζ ∗ ) g12 (ζ ∗ , ζ0∗ )}ds = 0,

304

7 Harmonic Oscillations

where the kernels gm (m = 1, 2, . . . , 12) and the right parts are determined by eiψ0 1 eiψ0 κ Im Im ∗ , g8 (ζ ∗ , ζ0∗ ) = , 2 ζ, ζ0 2π i ζ − ζ0∗ iπ 2 g2 (ζ, ζ0 ) = γ 2 1 + k15 [H2 (γ r0 ) cos (ψ + ψ0 − 2α0 ) 8 g1 (ζ, ζ0 ) =

(7.6)

(1)

−H0 (γ r0 ) cos (ψ − ψ0 ) , (1) 2 g3 (ζ ∗ , ζ0 ) = π 1 + k15 γH1 (γ r10 ) cos (ψ0 − α1 ) , 2 Im g4 (ζ ∗ , ζ0 ) = −k15

eiψ0 , ζ ∗ − ζ0

g5 (ζ, ζ0∗ ) =

eiψ10 κ Im , 4π i ζ − ζ0∗

γ 2 (1) (1) H2 (γ r2 ) cos (ψ + ψ10 − 2α2 ) − H0 (γ r2 ) cos (ψ − ψ10 ) , 16 eiψ10 γ 1 , g7 (ζ ∗ , ζ0∗ ) = − H1 (γ r3 ) cos (ψ10 − α3 ) + Re ∗ 2i π ζ − ζ0∗

g6 (ζ, ζ0∗ ) = −

eiψ10 eiψ10 1 1 ∗ ∗ Re Re , g (ζ , ζ ) = − , 12 0 2π ζ − ζ0∗ π ζ ∗ , ζ0∗ iγ 2 (1) (1) H2 (γ r2 ) sin (ψ + ψ10 − 2α2 ) + H0 (γ r2 ) sin (ψ − ψ10 ) , g10 (ζ, ζ0∗ ) = − 8 eiψ10 2i ∗ ∗ , g11 (ζ , ζ0 ) = −γH1 (γ r3 ) sin (ψ10 − α3 ) + Im ∗ π ζ − ζ0∗ 2i 4i (1) (1) H1 (x) = + H1 (x) , H2 (x) = + H2 (x) , πx π x2 π Z N1 (ζ0 ) = E X3 (ζ0 ) , N2 (ζ0 ) = − E , 2 ) c44 2ic44 (1 + k15 2 k15 κ= r0 = |ζ − ζ0 | , r10 = |ζ ∗ − ζ0 | , 2 , 1 + k15 g9 (ζ, ζ0∗ ) = −

r2 = |ζ − ζ0∗ | , ∗

r3 = |ζ ∗ − ζ0∗ | ,

α0 = arg (ζ − ζ0 ) ,

α1 = arg (ζ − ζ0 ) , α2 = arg (ζ − ζ0∗ ) , α3 = arg (ζ ∗ − ζ0∗ ) , ψ = ψ (ζ) , ψ0 = ψ (ζ0 ) , ψ10 = ψ1 (ζ0∗ ) , ζ, ζ0 ∈ L = ∪Lj ;

ζ ∗ , ζ0∗ ∈ C.

In order to solve the system (7.5) we have to augment it with the additional conditions

dU3 ds = 0 (j = 1, 2, . . . , k) , (7.7) ds Lj

which express the absence of displacement jumps U3 on the tips of the cracks. The solution of the obtained system together with (7.7) is available for any frequency ω, not coinciding with its eigenfrequency. At k15 = 0 the ﬁrst two integrodiﬀerential equations in (7.5) correspond to the case of piezopassive cylinder with cracks.

7.1 A Cylinder Weakened by Tunnel Cracks (Direct Piezoeﬀect)

305

To determine the stress intensity factor we introduce the parameterization of contour L using the expressions

dU3 Ω (β) ζ = ζ (β) , , (7.8) = ds s (β) 1 − β 2 ds s (β) = > 0, β ∈ [−1, 1] . dβ Taking into account (7.3), (7.8) and performing asymptotic analysis of the quantities ∂i U3 , ∂i F (i = 1, 2) we ﬁnd the main singular part of the stress shear on the continuation of the tip of the crack to be −iω t Ω (±1) ds 0 E Re e σn = ±c44 . (7.9) , s (±1) = dβ β=±1 2 2r∗ s (±1) Here the lower sign refers to tip a, the upper sign to tip b, r∗ is the distance from the point to the tip. From (7.9) the stress intensity factor is given by √ √ πRe e−iω t Ω (±1) ± 0 E ∗ KIII = im 2π r σn = ±c44 . (7.10) r ∗ →0 2 s (±1) To determine the stress concentration in the cylinder with cracks we should calculate as usual the stress σs = σ23 cos ψ − σ13 sin ψ on C. We have iψ10 ∂ U3 2 −iψ10 ∂ U3 Ts (ζ0∗ ) = icE − e + (7.11) 1 + k e 44 15 ∂ ζ0∗ ∂ ζ0∗ iψ10 ∂ F −iψ10 ∂ F +e + e15 e , ∂ ζ0∗ ∂ ζ0∗ −iω t σs = Re Ts e , ψ10 = ψ1 (ζ0∗ ) , ζ0∗ ∈ C. In (7.11) the derivatives are calculated at their limiting values at z → ζ0∗ the transition is carried from the area of the body to the contour. From (7.3) we ﬁnd ⎫ ⎧ ⎬ ⎨ 2 Ts (ζ0∗ ) = cE [U3 ] g10 (ζ, ζ0∗ )ds + p (ζ ∗ ) g11 (ζ ∗ , ζ0∗ )ds − 44 1 + k15 ⎭ ⎩ L

−

2 cE 44 k15 π

C

(7.12) ⎧ ⎫ ⎨ 1 dU ⎬ eiψ10 eiψ10 3 ∗ ∗ ds + π f (ζ ) + (ζ )Re ds Re . 0 ⎩2 ds ζ − ζ0∗ ζ ∗ − ζ0∗ ⎭ L

C

g10 (ζ, ζ0∗ ) ,

∗

, ζ0∗ )

g11 (ζ deﬁned in (7.6). where the functions As an example consider a circular piezoceramic cylinder with radius R (by P ZT − 4 ceramics) with a horizontal linear crack of 2 length and with the center lying on the axis of the cylinder.

306

7 Harmonic Oscillations λ

5 4 3 2 1

γ*R

0 0

3

6

9

12

15

Fig. 7.2. Behaviour of quantity λ = |Ts /Z0 | at point ϕ = π as a function of normalized wave number of γ ∗ R under the inﬂuence of forces Z = Z0 sin2 ϕ

The solution of (7.5), (7.7) is obtained by the method of quadrature (see: Appendix B, Par. B.1, Par. B.2). The maximum number of the division nodes on the intervals of integration [0, 2π] and [−1, 1] was assumed to be equal to n1 = 61 and n2 = 40, respectively; practically, a further increase of the parameters n1 , n2 did not inﬂuence the accuracy of the results. Figure 7.2 shows the behavior of the quantity λ = |Ts /Z0 | at the point of contour ϕ = π as a function of the normalized wave number γ ∗ R = 2 γR 1 + k15 . The calculation is carried out for the case, where the edges of the crack are free from loading, while shear stresses applied on the side surface of the cylinder. The shear stresses change according to Z = Z0 sin 2ϕ (ϕ is the polar angle). To evaluate the inﬂuence of the crack on the amplitude-frequency characteristics of the cylinder, we calculated the quantity λ = λ (γ ∗ R) at ϕ = π in the vicinity of the ﬁrst three natural frequencies of oscillation of the piezoceramic cylinder (without a crack) (shown in Fig. 7.3). This is obtained with the help of the system of integral (5.4) where the signs before the integrated λ

5 4 3 2 1 0

γ*R 0

3

6

9

12

15

Fig. 7.3. The graph of quantity λ = λ(γ ∗ R) at ϕ = π in the vicinity of the ﬁrst three natural frequencies of the oscillations of a homogenous piezoceramic cylinder under the inﬂuence of forces Z = Z0 sin2 ϕ

7.1 A Cylinder Weakened by Tunnel Cracks (Direct Piezoeﬀect)

307

+

6.0 4.8 3.6 2.4 1.2 0.0

γ*R 0

3

6

9

12

15

+ Fig. 7.4. Behaviour of the relative intensity factor according to γ ∗ R under the inﬂuence of forces Z = Z0 sin2 ϕ

summands should be changed to the opposite ones, and the terms corresponding to monochromatic waves should be omitted. Comparing the graphs shown in Figs. 7.2 and 7.3 we conclude that the availability of the tunnel crack inside the cylinder may qualitatively change its amplitude-frequency characteristics. + = Figure 7.4 depicts the behavior of relative intensity factor KIII E ∗ c44 |Ω (1)| 2 |Z0 | s (1) with respect to γ R. Assuming that the quan + tity KIII is known, the stress intensity factor may be determined by √ ± = ± π |Z0 | < K± KIII III > cos {ωt − arg Ω (±1)}.

Fig. 7.5. The contour lines of the modulus of displacement amplitude U3 in the vicinity of the ﬁrst three natural excitation frequencies of a cylinder by shear forces Z = Z0 sin2 ϕ

308

7 Harmonic Oscillations

Fig. 7.6. The contour lines of the modulus of displacement amplitude U3 in the vicinity of the ﬁrst three natural excitation frequencies of a cylinder by shear forces Z = Z0 sin2 ϕ

Fig. 7.7. The countour lines of the modulus of displacement amplitude U3 in the vicinity of the ﬁrst three natural excitation frequencies of a cylinder by shear forces Z = Z0 sin2 ϕ

7.2 A Cylinder with a Thin Rigid Inclusion

309

Figures 7.5–7.7 illustrate the contour lines of the modulus of displacement amplitude U3 in the vicinity of the ﬁrst three resonance frequencies of excitation of the cylinder by shear forces Z = Z0 sin 2ϕ (X3 = 0). The normalized wave number, corresponding to resonance frequencies, which are ∗ ∗ ∗ R ≈ 3.24, γ(2) R ≈ 9.06 and γ(3) R ≈ 13.125. For approximately equal to γ(1) our illustrations we used /R = 0.2.

7.2 A Cylinder with a Thin Rigid Inclusion Let us consider a piezoceramic cylinder continuous in the direction of x3 -axis, containing a tunnel along the element rigid curvilinear insert L (stringer). Assuming that the vector of preliminary polarization of piezoceramics is directed along there are two variants of the electric boundary conditions x3 - axis, Zn = Re Ze−iωt : (a) the cylinder surface is assumed to be electrodized and grounded (variant A); (b) the cylinder surface is not electrodized and coupled with vacuum (variant B). In order to solve the above problem we use the complex representations of the components of electroelastic ﬁeld (6.2), (6.3) in the case of antiplane deformation. In order to solve (6.1) we use (6.5) that refer to the amplitudes of the sought-for functions. Assuming that the inclusion is ﬁxed, the mechanical and electric boundary conditions on contour L read U3± = 0, Es+

=

(7.13)

Es− ,

Dn+

=

Dn− .

(7.14)

Here Es and Dn are the tangential component of the vector of electric strength and the normal component of the vector of electric induction, respectively; the plus and minus signs refer to the left and right edges of inclusion L at movement from its beginning a to the end b (Fig. 7.8).

b x2 O

– +

x1

Γ

L a

Fig. 7.8. The scheme of cross-section of a cylinder with inclusions

310

7 Harmonic Oscillations

To obtain an eﬃcient (with respect to numerical realization) system of integral equations, it is helpful to the diﬀerentiate boundary condition (7.13) over the arc coordinate s ± ∂ U3 = 0. (7.15) ∂s The boundary conditions on the contour of cylinder Γ for the considered variants are given by ∂ E 2 c44 1 + k15 U3 + e15 F ∗ = Z, (7.16) ∂n φ∗ = 0, (7.17) ∗ ∂F = 0. (7.18) Dn = − ε11 ∂n The boundary equalities (7.17), (7.18) correspond to variants A and B, respectively. In what follows, instead of (7.17) we will use the condition ∂ e15 (7.19) F ∗ + ε U3 = 0. ∂s 11 The question here is how, we can derive the functions U3 and F ∗ from diﬀerential (6.5) and the boundary conditions (7.15), (7.16) and also (7.18) or (7.19). The integral representations of functions U3 and F ∗ is guided by the fundamental solution of the system of (6.1) in the case, where the dependence on time is harmonic. In this case, the system (6.1) may be represented in the form of (4.59) and its solution can be found by the formulas (4.60). We have ⎧ ⎫ ⎨ ⎬ i (1) 1 ∗ q (ζ) H (γr)ds + p (ζ )H (γr ) ds U3 (x1 , x2 ) = E + 1 0 0 2 ) ⎩ ⎭ 4c44 (1 + k15 L

2 k15

Γ

(7.20) (1)

f (ζ ∗ )H0 (γr1 ) ds, 2 ) 4ie15 (1 + k15 Γ 1 ∗ f (ζ ∗ ) nr1 ds, F (x1 , x2 ) = − 2π ε11 +

Γ

r = |ζ − z| , (1)

r1 = |ζ ∗ − z| ,

ζ ∈ L, ζ ∗ ∈ Γ.

ankel function of the ﬁrst kind and of order ν, ds is the here Hν (x) is the H¨ element of the arc- length contour, over which the integration is carried out. It is easy to realize that representations (7.20) automatically satisfy conditions (7.14) on L and provide the performance of equalities [U3 ] = U3+ − U3− = 0 in (7.13). The unknown “densities” q (ζ) , p (ζ ∗ ) and f (ζ ∗ ) are determined from the complex system of three integral equations, which are obtained as the result of substitution of the limiting values of derivatives of the functions in (7.20) at z → ζ ∈ L and z → ζ ∗ ∈ Γ in the corresponding boundary conditions.

7.2 A Cylinder with a Thin Rigid Inclusion

311

The system is represented in the following form: ∗ ∗ q (ζ)G1 (ζ, ζ0 ) ds + p (ζ )G2 (ζ , ζ0 ) ds + f (ζ ∗ )G3 (ζ ∗ , ζ0 ) ds = 0, L

1 p (ζ0∗ ) + 2

Γ

q (ζ)G4 (ζ, ζ0∗ ) ds

+

L ∗

f (ζ )G6 (ζ Γ

+

∗

p (ζ )G5 (ζ , ζ0∗ ) ds

Γ

+

Γ ∗

∗

, ζ0∗ ) ds

=Z

p (ζ ∗ )G8 (ζ ∗ , ζ0∗ ) ds +

Γ

(ζ0∗ ) , λf

(ζ0∗ )

+

q (ζ)G7 (ζ, ζ0∗ ) ds

L

f (ζ ∗ )G9 (ζ ∗ , ζ0∗ ) ds = 0,

Γ

eiψ0 1 2i G1 (ζ, ζ0 ) = E γ H1 (γ r0 ) sin (ψ0 − α0 ) − Im , π ζ − ζ0 c44 γ (1) G2 (ζ ∗ , ζ0 ) = E H1 (γ r10 ) sin (ψ0 − α1 ) , c44 k 2 γ (1) G3 (ζ ∗ , ζ0 ) = − 15 H1 (γ r10 ) sin (ψ0 − α1 ) , e15 iγ (1) G4 (ζ, ζ0∗ ) = H1 (γ r2 ) cos (ψ10 − α2 ) , 4 eiψ10 1 iγ Re ∗ + H1 (γ r3 ) cos (ψ10 − α3 ) , G5 (ζ ∗ , ζ0∗ ) = ∗ 2π ζ − ζ0 4

(7.21)

2 cE 44 k15 γ H1 (γ r3 ) cos (ψ10 − α3 ) , 4ie15 2 2i k15 (1) + H1 (x) , κ = H1 (x) = 2 , πx 1 + k15

G6 (ζ ∗ , ζ0∗ ) =

r0 = |ζ − ζ0 | ,

r10 = |ζ ∗ − ζ0 | ,

r2 = |ζ − ζ0∗ | ,

r3 = |ζ ∗ − ζ0∗ | , α0 = arg (ζ − ζ0 ) , α1 = arg (ζ ∗ − ζ0 ) , α2 = arg (ζ − ζ0∗ ) , ψ0 = ψ (ζ0 ) ,

ψ10 = ψ1 (ζ0∗ ) ,

ζ, ζ0 ∈ L,

α3 = arg (ζ ∗ − ζ0∗ ) , ζ ∗ , ζ0∗ ∈ Γ.

When φ|Γ = 0 (variant A) we have κγ (1) H (γ r2 ) sin (ψ10 − α2 ) , G7 (ζ, ζ0∗ ) = 4ie15 1 eiψ10 κ 2i G8 (ζ ∗ , ζ0∗ ) = γ H1 (γ r3 ) sin (ψ10 − α3 ) − Im ∗ , 4ie15 π ζ − ζ0∗

λ = 0,

G9 (ζ ∗ , ζ0∗ ) = −

2π

ε11

(7.22)

eiψ0 1 κγ Im ∗ − H1 (γ r3 ) sin (ψ10 − α3 ) . 2 (1 + k15 ) ζ − ζ0∗ 4i ε11

312

7 Harmonic Oscillations

To satisfy the boundary conditions Dn |Γ = 0 in (7.21) (variant B) we have to use λ=

1 , 2

G7 (ζ, ζ0∗ ) = G8 (ζ ∗ , ζ0∗ ) = 0,

G9 (ζ ∗ , ζ0∗ ) =

(7.23)

eiψ10 1 Re ∗ . 2π ζ − ζ0∗

In (7.21)–(7.23) the quantities ψ = ψ (ζ) and ψ1 = ψ1 (ζ ∗ ) are the angles between x1 -axis and the normal vectors to contours L and Γ, respectively. Here, it should be mentioned, that the solution of the system of integral (7.21) can be obtained for any frequency ω not coinciding with its eigenfrequency. At e15 = 0 the system (7.21) corresponds to the piezopassive (isotropic) cylinder with inclusion. To determine the shear stress σs = Re Ts e−iωt on the boundary of the cylinder we use (6.76). At z → ζ0∗ ∈ Γ, from (7.20), we can obtain the amplitude of shear stress Ts : ⎧ ⎫ ⎨ ⎬ e 15 Ts (ζ0∗ ) = p (ζ ∗ ) G8 (ζ ∗ , ζ0∗ ) ds + q (ζ) G7 (ζ, ζ0∗ ) ds − (7.24) ⎭ κ ⎩ Γ L e15 γ f (ζ ∗ ) sin (ψ10 − α3 ) H1 (γ r3 ) ds. − ε 4i11 Γ

The functions G7 (ζ, ζ0∗ ) , G8 (ζ, ζ0∗ ) appearing in (7.24) deﬁned in (7.22). Equation (7.24) permits us to investigate the concentration of stresses in the cylinder according to the excitation frequency, the position and conﬁguration of the inclusion. With quite similar assumptions to those that were stated in Sect. 6.9, we obtain q (ζ)ds = 0, (7.25) L

This should be considered as an additional condition for the solution of the system of singular integral (7.21) in the class of functions, not restrained on tips, L. As an example consider the circular cylinder with radius R (by P ZT − 4 ceramics), containing an inclusion of parabolic section orientated at angle ϑ to Ox1 -axis. The parametric equations of contour L have the form Reζ = pδ cos ϑ − p∗ δ 2 sin ϑ, Imζ = pδ sin ϑ + p∗ δ 2 cos ϑ

(−1 ≤ δ ≤ 1) .

(7.26)

Taking into account (7.26), the solution of system (7.21), (7.25) was carried out by the standard method. The inclusion is assumed to be orientated along

7.2 A Cylinder with a Thin Rigid Inclusion

313

λ

5 4 3 2 1 0

γ*R 0

3

6

9

12

15

Fig. 7.9. Changes of λ = |TS /Z0 | at the point of contour β = π in the vicinity of the ﬁrst three eigenfrequencies of oscillations (variant A)

x1 (ϑ = 0)- axis and its center is on the axis of the cylinder, the boundary of which is electrodized and grounded. On the cylinder surface, the forces change according to the law Z = Z0 sin 2β (β is the polar angle). The calculations show that in this case we have that q (ζ) ≡ 0, and, thus, the existence of the inclusion does not change the electroelastic state of the cylinder. The case where the linear inclusion is orientated at angle ϑ = π/4 to Ox1 axis, its inﬂuence under the above mentioned loading is already studied. Figures 7.9 and 7.10 illustrate changes of λ = λ (γ ∗ R) = |Ts /Z0 | at the point of contour β = π in the vicinity of the ﬁrst three natural frequencies of the oscillations for variants A and B at p/R = 0.2. The inﬂuence of the electric boundary conditions on the contour of the cylinder is manifested by the fact that the resonance frequencies for case B are displaced to the right in comparison with variant A, and this displacement is reduced with the increase of the number of the resonance frequency. It is important to mention, that the λ

5 4 3 2 1 0

γ*R 0

3

6

9

12

15

Fig. 7.10. Changes of λ = |TS /Z0 | at the point of contour β = π in the vicinity of the ﬁrst three eigenfrequencies of oscillations (variant B)

314

7 Harmonic Oscillations 5.0

|q/Z0| 2

2 2.5

1 1 0.0 –1.0

δ –0.5

0.0

Fig. 7.11. Changes of the absolute intensity value of the contact force on a parabolic insert

resonance picks shown in Fig. 7.10 are wider than those in Fig. 7.9, revealing a more eﬃcient electromechanical transformation of the energy at the contact of the cylinder surface with vacuum (air), than in the case of an electrodized boundary [115]. Figure 7.11 depicts the change of the absolute value of intensity of the contact force on a parabolic inclusion. Curves 1 and 2 are constructed for γ ∗ R = 8, p/R = 0.4, ϑ = 0, p∗ /R = 0.1 and 0.4. The solid and dashed lines are constructed for A and B variants, respectively. As it follows from the asymptotic analysis of system (7.21), the function q (ζ) has singularities of square root type in the vicinity of the ends of the inclusion (δ = ±1).

Fig. 7.12. The contour lines of the modulus of the electric potential amplitude in the area of a cylinder with a straight insert (variant A)

7.2 A Cylinder with a Thin Rigid Inclusion

315

Fig. 7.13. The contour lines of the modulus of the displacement amplitude in the area of a cylinder with a straight insert (variant A)

Figures 7.12 and 7.13 show the contour line of the modulus of the amplitude of the electric potential and displacement, corresponding to variant A, in the area of the cylinder with a straight inclusion at p/R = 0.4, ϑ = π/4, γ ∗ R = 10, respectively. Figures 7.14–7.16 show the results for the

Fig. 7.14. The contour lines of the modulus of the displacement amplitude in the area of a cylinder with a straight insert in the vicinity of the ﬁrst eigenfrequency of oscillations (variant B)

316

7 Harmonic Oscillations

Fig. 7.15. The contour lines of the modulus of the displacement amplitude in the area of a cylinder with a straight insert in the vicinity of the ﬁrst eigenfrequency of oscillations (variant B)

Fig. 7.16. The contour lines of the modulus of the displacement amplitude in the area of a cylinder with a straight insert in the vicinity of the ﬁrst eigenfrequency of oscillations (variant B)

7.3 A Cylinder with a Crack Excited by a System of Electrodes

317

Fig. 7.17. Equipotentials in the vicinity of the main eigenfrequency of oscillations (variant A)

modulus of the amplitude of displacement for case B and for frequencies close to eigenfrequencies (γ ∗ R ≈ 4.3; 9.456 and 14.06). In Fig. 7.17 the equipotentials for variant A in the vicinity of the main eigenfrequency of oscillations (γ ∗ R ≈ 3.263) are given.

7.3 A Cylinder with a Crack Excited by a System of Electrodes In the section we investigate the oscillations of a cylinder with a tunnel crack during electric excitation of an arbitrary system of electrodes (Fig. 7.18). Taking into account representations (6.2), (6.3) the boundary conditions on the X2

β2 B

β1

L + – C

X1

A

Fig. 7.18. The scheme of cross-section of an electrodized cylinder with a crack

318

7 Harmonic Oscillations

surface of the opening and crack L may be represented in the form of (6.49). Working with the integral representations (6.50), providing the availability of a displacement jump, the continuity of the stress vector on L, and also the satisfaction of electric conditions Es+ = Es− , Dn+ = Dn− on L, we get a system of integrodiﬀerential (6.51), where before the integrated summands it is necessary to switch signs. This system should be augmented with the additional condition (6.52). As an example consider a cylinder (made by P ZT − 4 ceramics) with an elliptic cross-section containing a linear crack orientated at an angle ϑ with respect to Ox1 axis. The oscillation of the cylinder is generated by two electrodes with a diﬀerence of potential amplitude equal to 2Φ∗ , the centers of which are positioned on x2 -axis. The parametric equations of contours L and C, respectively, read ζ = δ eiϑ ,

δ ∈ [−1, 1]

ζ ∗ = R1 cos β + iR2 sin β,

(7.27) β ∈ [0, 2π] .

+ Figure 7.19 shows the dependence of the relative intensity factor KIII = E ∗ c44 π/s (1) |Ω0 (1)| / (2e15 |Φ |) as a function of the normalized wave number γR at R1 /R2 = 1, /R = 0.2, ϑ = 0 (R = 0.5 (R1 + R2 ) , 2 is the length of the cut). Figure 7.20 presents the behavior of the quantity Q∗ = |Q/ (ε11 Φ∗ )| (Q is the amplitude of the total charge on an electrode) for the same parameter values. In this case the values of the ﬁrst three natural frequencies of the oscillation are equal to γ(1) R ≈ 1.35, γ(2) R ≈ 3.9 + is known, the stress and γ(3) R ≈ 4.24. Assuming that the quantity KIII intensity factor may be determined by (6.62). ∗ Figure 7.21 illustrates the change of quantity λ = cE 44 |[U3 ] /Φ |, characterizing a displacement jump on the crack at various angles of its orientation in the circular cylinder at γR = 3, /R = 0.4. The curve with number m is +

8

4

0

γR 0

3

6

Fig. 7.19. Dependence of relative stress intensity factor < K± III > on normalized wave number γR

7.3 A Cylinder with a Crack Excited by a System of Electrodes

319

Q*

10

5

0

γR 0

3

6 ∗

Fig. 7.20. Behaviour of relative total charge Q = |Q/ (ε11 Φ∗ )| on an electrode as a function of γR 120

λ 1 2

60

3

4

δ

0 –1

0

Fig. 7.21. Changes of quantity λ = its orientation in a circular cylinder 15.0

cE 44

1 ∗

|[U3 ] /Φ | on a crack for various angles of

η 1 2 3

7.5

0.0 0

π/2

β

∗ Fig. 7.22. Changes of quantity η = cE 44 |[U3 ]/Φ | on the contour of a piece-wise homogenous cylinder for various areas of an electroded coating

320

7 Harmonic Oscillations

(a)

(b)

(c)

Fig. 7.23a,b and c. The contour lines of the modulus of the displacement in a cylinder with a crack in the vicinity of the ﬁrst three eigenfrequencies of oscillation

7.4 A Cylinder With an Inclusion Excited by a System of Electrodes

321

constructed for ϑ = (m − 1) π. It should be mentioned, that at ϑ = π/2 the availability of the crack does not change the electroelastic state of the cylinder. We considered the parameters of the variants when the positions of the electrodes were prescribed as β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14. ∗ Figure 7.22 depicts the distribution of η = cE 44 |[U3 ]/Φ | on the contour of a piecewise-homogeneous cylinder for various areas of the electrodized coating at R1 /R2 = 2, /R1 = 0.4, ϑ = 0, γR = 0.5. Curves 1, 2 and 3 are constructed for β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6βk = (2k − 1) π/4 k = 1, 4 and β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14. What is of major interest here is the investigation of the behavior of the mechanical quantity in the area of a piecewise-homogeneous cylinder. Figure 7.23a,b and c illustrate lines of equal modulus of the displacement amplitude in the vicinity of the ﬁrst three natural frequencies of oscillation (/R = 0.2) at β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14.

7.4 A Cylinder With an Inclusion Excited by a System of Electrodes In the Cartesian system of coordinates Ox1 x2 x3 consider a continuous piezoceramic cylinder oriented along the x3 -axis, containing a thin rigid inclusion L (see Fig. 7.24). The boundaries of the k-th electrode are determined by the quantities β2k−1 and β2k k = 1, 2 , and the electric potential on it is prescribed by the quantity φ∗k = Re Φ∗k e−iωt . The boundary condition on the contours C and L are represented in the form of (6.63)–(6.65). Using the integral representations of the solution we arrive at a system of integrodiﬀerential equations of the second kind of type (6.67), where the signs before the integrated summands should be switched. It is necessary to augment the system by the conditions (6.71). We use formulas (6.76), (6.77) to determine the concentration of shear stresses in the cylinder with inclusion where the sign before the integrated summands should be switched. X2

β2 B

– +

β1 X1

A

Fig. 7.24. The scheme of cross-section of an electrodized cylinder with an inclusion

322

7 Harmonic Oscillations 7

Q*

3.5

γR

0 0

3.25

6.5

Fig. 7.25. Changes of the relative total electric charge on an electrode as a function of the normalized wave number in case of a cylinder of circular cross-section (β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 25π/14)

Consider a piezoceramic cylinder (the material is P ZT − 4) with an elliptic cross-section, containing a parabolic insert orientated at an angle ϑ with respect to Ox1 -axis. The parametric equations of contours L and C, read ζ = p1 δ + ip2 δ 2 eiϑ , δ ∈ [−1, 1] (7.28) ζ ∗ = R1 cos β + iR2 sin β,

7

β ∈ [0, 2π] .

Q*

3.5

0

γR 0

3.25

6.5

Fig. 7.26. Changes of the relative total electric charge on an electrode as a function of the normalized wave number in case of a cylinder of circular cross-section (β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6)

7.4 A Cylinder With an Inclusion Excited by a System of Electrodes 15.5

323

Q*

7.75

γR

0 0

2.5

5

Fig. 7.27. Changes of the relative total electric charge on an electrode as a function of the normalized wave number in case of a cylinder of elliptic cross-section (β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6)

Our purpose is to investigate the amplitude-frequency characteristics of a cylinder with linear inclusion (p2 = 0), orientated along x2 (ϑ = π/2)axis, at R1 /R2 = 1 and p1 /R = 0.4 (R = 0.5 (R1 + R2 )). Figures 7.25 and 7.26 demonstrate the behavior of Q∗ = |Q/ (ε11 Φ∗ )| (Q is the total charge on an electrode) as function of the normalized wave number γR due to the prescribed on two electrodes diﬀerence of potentials 2Φ∗ . The 150

λ

1 75

2 3

0 –1

δ 0

1

Fig. 7.28. Changes of the intensity of contact forces on a linear4 insert for the various values of normalized wave number γR

324

7 Harmonic Oscillations

parameters determining the position of the electrodes were prescribed as follows: β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14 (Fig. 7.25) and β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6 (Fig. 7.26). For our illustrations we used the following approximate values of the ﬁrst three natural frequencies of oscillation: γ(1) R = 1.74, γ(2) R = 3.99, γ(3) R = 6.32 (Fig. 7.25); γ(1) R = 1.70, γ(2) R = 3.36, γ(3) R = 6.28 (Fig. 7.26). Analogous result for a cylinder with an elliptic section having an inclusion, orientated at an angle ϑ = π/4 with respect to Ox1 - axis, are given in Fig. 7.27 (setting R1 /R2 = 2, p1 /R1 = 0.3, β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6). In this case the values of the ﬁrst three natural frequencies of oscillations are given by γ(1) R = 1.14, γ(2) R = 2.30, γ(3) R = 3.26. Let us investigate the intensity of contact forces on the insert according to the various parameters. In Fig. 7.28 shows the change of λ = (q (δ) /Φ∗ ( due to the prescribed diﬀerence of potentials 2Φ∗ on the two surface electrodes. The calculation was carried out on a circular cylinder with a linear inclusion (ϑ = π/2) at p1 /R = 0.4. Figure 7.25 depicts the results with respect to βk k = 1, 4 . The curves 1, 2 and 3 are constructed for γR = 1, 3, 5, respectively. The changes of λ on the contour of an parabolic inclusion, orientated at an angle ϑ = π/2 (Fig. 7.29) and ϑ = π/4 (Fig. 7.30), are illustrated by curves 1, 2 and 3 for p2 /R = 0, 0.3, 0.5, respectively. The calculation was carried out setting p1 /R = 0.4, β1 = π/4, β2 = 3π/4, β3 = 5π/4, β4 = 7π/4. The graphs in Fig. 7.29 were constructed for γR = 2; in Fig. 7.30 were constructed for γR = 4. 300

λ 1 2

3 150

0 –1

δ 0

1

Fig. 7.29. Changes of intensity of the contact forces on a parabolic insert for the various parameters values of curvature (θ = π/2)

7.4 A Cylinder With an Inclusion Excited by a System of Electrodes 100

325

λ

50

3

0 –1

1

δ

2 0

1

Fig. 7.30. Changes of intensity of the contact forces on a parabolic insert for various parameter values of curvature θ = π/4

If a linear inclusion is orientated along x1 -axis, its center and the centers of the two electrodes are lying on x2 -axis, it follows that q (ζ) ≡ 0 (by the solutions of the integral equations). Therefore, in this case the availability of the inclusion does not change the state of electroelasticity of the cylinder. Consider now the behavior of the displacement on the boundary of a piecewise-homogeneous cylinder according to the conﬁguration of the inclusion, its orientation and the area of the electrodized coating. ∗ Figures 7.31, 7.32 and 7.33 illustrate the distribution of η = cE 44 |[U3 ]/Φ | on the contour of a circular cylinder with a linear inclusion, orientated along x2 (ϑ = π/2)-axis (Fig. 7.31) and x1 (ϑ = 0) -axis (Figs. 7.32, 7.33) at γR = 1. The values of the parameters, assigning the position of a pair η

22

1

2 11 3

4

0

0

π /2

β

Fig. 7.31. Distribution of the displacement amplitude on the contour of a circular cylinder with two electrodes for various parameter values p1 /R

326

7 Harmonic Oscillations 18

η

3

1

2

2

1 3

9

0

π

0

β

Fig. 7.32. Distribution of the displacement amplitude on the contour of a circular cylinder with four electrodes for various parameter values p1 /R (Φ∗1 = −Φ∗2 = Φ∗3 = −Φ∗4 = Φ)

28

η 1

2

1

14

2

0 0

π

β

Fig. 7.33. Distribution of the displacement amplitude on the contour of a circular cylinder with four electrodes for various parameter values p1 /R (Φ∗1 = Φ∗2 = −Φ∗3 = −Φ∗4 = Φ∗)

7.4 A Cylinder With an Inclusion Excited by a System of Electrodes 28

327

η 1

2 14

3

0

π

0

β

Fig. 7.34. Dependence of the displacement amplitude on the contour of a cylinder with two electrodes on the orientation angle of the insert

electrodes with the diﬀerence of potentials 2Φ∗ , were: β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14 (Fig. 7.31). In Fig. 7.31 curves 1–4 are constructed for p1 /R = 0.2, 0.4, 0.6, 0.8, respectively. The graphs in Figs. 7.32 and 7.33 were obtained for a cylinder excited by four electrodes (β1 = 5π/24, β2 = 11π/24, β3 = 13π/24, β4 = 19π/24, β5 = 25π/24, β6 = 31π/24, β7 = 41π/24, β8 = 47π/24) with the prescribed electric potentials: Φ∗1 = −Φ∗2 = Φ∗3 = −Φ∗4 = Φ∗ (Fig. 7.32) and Φ∗1 = Φ∗2 = −Φ∗3 = −Φ∗4 = Φ∗ (Fig. 7.33). Curves 1, 2 and 3 in Fig. 7.32 correspond to p1 /R = 0.2, 0.4, 0.8; curves 1 and 2 in Fig. 7.33 to p1 /R = 0.2 and 0.8. The dependence of the displacement on the cylinder contour on the orientation angle of the linear inclusion is illustrated in Fig. 7.34. Curves 1, 2 and 3 26

η 2

13 1

0

0

π

β

Fig. 7.35. Dependence of the displacement amplitude on the contour of a cylinder with four electrodes on the orientation angle of the insert (θ = 0 and π/4 )

328

7 Harmonic Oscillations 24

η

12

0

π

0

β

Fig. 7.36. Dependence of the displacement amplitude on the contour of a cylinder with four electrodes on the orientation angle of the insert θ = π/4

represent the quantity η for ϑ = 0, π/4, π/2 for and p1 /R = 0.6, respectively. The values of the parameters, determining the position of the two electrodes were set as follows: β1 = π/4, β2 = 3π/4, β3 = 5π/4, β4 = 7π/4. Figures 7.35 and 7.36 depict the behavior of η on the contour of a circular cylinder, excited by four electrodes, for γR = 1, p2 /R = 0 and p1 /R = 0.4. In Fig. 7.35 curves 1 and 2 correspond to ϑ = 0 and ϑ = π/2. The graphs in Fig. 7.36 are constructed at ϑ = π/4. Figure 7.32 illustrate the results with 28

η 1

2

2

14

0

3

3

0

π

β

Fig. 7.37. Distribution of the displacement amplitude on the contour of a cylinder with two electrodes at various curvature of the parabolic inclusion

7.4 A Cylinder With an Inclusion Excited by a System of Electrodes 28

329

η 1

2 2 14 3

0

π

0

β

Fig. 7.38. Distribution of the displacement amplitude on the contour of a cylinder with four electrodes at various curvatures of the parabolic inclusion

respect to βk k = 1, 8 . In our calculations we assumed that Φ∗1 = −Φ∗2 = Φ∗3 = −Φ∗4 = Φ∗ . Figures 7.37 and 7.38 illustrate the graphs of quantity η on circular contour C for various curves of the parabolic inclusion. It was assumed that γR = 1, ϑ = 0 p1 /R = 0.6 (Fig. 7.37) and p1 /R = 0.4 (Fig. 7.38). Figure 7.37 corresponds to the case of the loading of a cylinder with two electrodes (β1 = π/4, β2 = 3π/4, β3 = 5π/4, β4 = 7π/4), and curves 1, 2 and 3 are constructed for p2 /R = 0, 0.3, 0.6, respectively. Figure 7.38 corresponds 14

η 3 2 1

7

0 0

π /2

β

Fig. 7.39. Distribution of the displacement amplitude on the contour of a cylinder according to the area of the electrode coating

330

7 Harmonic Oscillations

to the case of the loading of a cylinder with four electrodes (the parameters determining the position of the electrodes, correspond to Fig. 7.36). Curves 1, 2 and 3 were constructed for p2 /R = 0, 0.3 and 0.5, respectively. Figure 7.39 presents the results characterizing the distribution of displacements on the contour of a cylinder of elliptic section with linear inclusion, orientated along x2 -axis, with respect to the area of the electrodized coating. 2.4

η

2

1.2 1

3

0.0

π /2

0

β

Fig. 7.40. Changes of the amplitude of the relative tangential stress on the contour of a cylinder with two electrodes according to the orientation angle of the linear inclusion

(a)

(b)

Fig. 7.41a and b. The lines of the equal modulus of the displacement amplitude in the area of a cylinder in the vicinity of the ﬁrst (a) and second (b) eigenfrequencies of oscillations a) β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 25π/14 b) β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6

7.4 A Cylinder With an Inclusion Excited by a System of Electrodes

(a)

331

(b)

Fig. 7.42a and b. The lines of the equal modulus of the displacement amplitude in the area of a cylinder in the vicinity of the ﬁrst (a) and second (b) eigenfrequency of oscillations a) β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 25π/14. b) (β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6

It was assumed that γR = 1, R1 /R2 = 2 and p1 /R2 = 0.6. Curves 1, 2 and 3 are constructed for: β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14; β1 = 3π/10, β2 = 7π/10, β3 = 13π/10, β4 = 17π/10 and β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6, respectively. Figure 7.40 illustrates the distribution of relative shear stress τ = |Ts R/ (e15 Φ∗ )| on the contour of a circular cylinder with two electrodes with respect to the orientation of the linear inclusionfor p1 /R = 0.6, γR = 2 and β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14. Curves 1, 2 and 3 correspond to ϑ = 0, π/4 and π/2, respectively.

(c)

Fig. 7.43. The lines of the equal modulus of the displacement amplitude in the area of a cylinder in the vicinity of the third eigenfrequency of oscillations (β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6)

332

7 Harmonic Oscillations

Figures 7.41–7.43 show the lines of the equal modulus of the displacement amplitude in the area of a piecewise-homogeneous cylinder in the vicinity of the ﬁrst three natural frequencies of oscillations. Figures 7.41a and ba, 7.42a and ba illustrate results for β1 = 5π/14, β2 = 9π/14, β3 = 19π/14, β4 = 23π/14; Figs. 7.41a and bb, 7.42a and bb, 7.43 show results for β1 = π/6, β2 = 5π/6, β3 = 7π/6, β4 = 11π/6. From the results it follows that according to the excitation frequency, the conﬁguration of the inclusion, sizes and position of the electrodized portions, and also the prescribed diﬀerences of electric potentials on the electrodes we observe the redistribution of the displacements on the cylinder boundary. As it is seen in Figs. 7.41a and b–7.43 the rigid inclusion plays the role of a “ﬁxing agent”, preventing the propagation of the oscillations.

8 Electroacoustic Waves in Piezoceramic Media with Defects (Plane Deformation)

In the current chapter we study the interaction of waves of various types with defects of type of tunnel cracks and openings in a piezoelectric medium of the hexagonal class of symmetry with the help of the method of boundary integral equations. It is assumed that a crack in non-deformed state is a mathematical cut, and the edges of the crack do not contact during the harmonic with time eﬀect.

8.1 Waves in a Homogeneous Medium For the complete description of elastic and electromagnetic ﬁelds in a piezoelectric crystal it is necessary to use the equations of motion in the continuous medium ∂ 2 ui ∂ j σij = ρ 2 (8.1) ∂t and Maxwell-Lorentz equations without taking into account the external current and free charges → − → − − → ∂B , div D = 0 rot E = − ∂t → − → ∂B − → − rot H = , div B = 0 ∂t

(8.2)

where the components σij , Di are connected with the deformations εij and → − → − electric ﬁeld stress Ei by the equations of medium state, B = μ H . As in (8.1) where stresses σij are coupled with the electric ﬁeld Ei , the system of (8.1), (8.2) describe coupled elastic electromagnetic waves in a piezoelectric medium. The coupling of elastic and electromagnetic ﬁelds is determined by the piezoelectric constants of the material. The solution of system (8.1), (8.2) are elastic waves which propagate with a velocity U and the electromagnetic waves propagating with a velocity cα ∼ = 105 U . For the elastic

334

8 Electroacoustic Waves

waves that propagate in an electric ﬁeld we may neglect the magnetic ﬁeld moving for velocities U << cα , and assume → − rot E ∼ = 0,

− → E = −gradϕ.

(8.3)

Here the ﬁrst set of (8.1), (8.2) correspond to the equations of acoustic piezoelectric crystals in a quasi-static approximation ∂ 2 ui ∂ j σij = ρ 2 , ∂t → − → − div D = 0, rot E = 0,

− → E = −gradφ

(8.4)

while the second set

→ − − → ∂D → − rot H = , div H = 0 (8.5) ∂t permits us to ﬁnd the magnetic ﬁeld of an electroacoustic wave that is determined from the solution of system (8.4). Under this reprsesentation, a plane monocrhomatic wave may be represented in the form → − → → → − n ·− x → x . u (− x , t) = u0 cos ω t − = u0 cos ω t − k · − U

→ − → → k = ω− n /U = k − n is the wave vector; ω is the u0 is the wave amplitude; − → circular frequency; k = k = ω/U = 2π/λ is the wave number; λ is the wave length, i.e. the distance, at which the disturbance is propagated for one period, T = 2π/ω. →→ − For a plane monochromatic (sinusoidal) wave the surfaces ωt − k − x = → − const are planes perpendicular to wave vector k . These planes move in the space with a velocity U = ω/k, which is called the phase velocity of the wave. → − → Accordingly, the vector U = U − n is called the vector of phase velocity. The plane monochromic wave is represented in the complex form, → − → k ·− x −ω t

i − U (→ x , t) = U0 e

,

→ → u(− x , t) = ReU (− x , t),

(1)

U0 = U0

(2)

+ iU0 .

In general case phase velocity U depends on quantity k and on the → direction of propagation of plane wave − n . The medium, for which U = U (k), → − is called isotropic dispersive; then, f (ω, k ) = 0 is called dispersion equa→ tion and expresses the law of dispersion. If for all k and − n the velocity U is constant, there is no dispersion, and in such a medium the signal having a certain form at t = 0 is propagated with velocity U without changing its shape (i.e. it is invariant). It is known that in elastic, isotropic and inﬁnite medium two types of main waves may appear: a) longitudinal waves, where the displacement of the particles of the medium is parallel to the wave propagation, b) transversal, shear

8.1 Waves in a Homogeneous Medium

335

waves, where the displacement of the particles is perpendicular to the wave vector. If the unrestrained medium is anisotropic, there will be propagation of three waves in any direction, and in the general case no one of them is pure longitudinal or pure transverse. In that case they are two quasitransverse waves and a quasilongitudinal wave (see Fig. 8.1). Polarization of these waves, i.e. the direction of the displacement the medium particles are always perpendicular. Now consider the solution of (8.4), (8.5) for an unbounded piezoelectric medium in the form of plane monochromatic waves, propagating in the direc→ → n is perpendicular to the wave front). tion of − n = (n1 , n2 , n3 ) (the vector − → Substituting the expressions for the potential φ(− x , t) and the vector of the → − elastic displacement uj ( x , t) → − → − → − → − → → φ(− x , t) = Φei( n · x /V −ω t) , uj (− x , t) = Uj ei( n · x /V −ωt) (j = 1, 2, 3) , (8.6)

in (8.4), (8.5) and in the equations of the state of a piezoelectric medium we get a system of linear homogeneous equations with respect to the amplitude values of potential Φ and the elastic displacement Uj 2 (cE kips nl np − ρU δks )Us + eskj nj ns Φ = 0,

eskj nj ns Uk −

εjk

(8.7)

nj nk Φ = 0

Introducing the notation Γks = cE kips nl np ,

=εjk nj nk ,

γk = eskj nj ns ,

the system of (8.7) reads Γks − ρU 2 δks Us + γk Φ = 0,

γk Uk − Φ = 0.

Eliminating the amplitude of the potential Φ from (8.8), we obtain

γk γs Γks + − ρU 2 δks Us = 0 (k = 1, 2, 3) .

(8.8)

(8.9)

U (2)

n U (3)

U (1)

Fig. 8.1. The scheme illustrating the types of waves in an unbounded anisotropic medium

336

8 Electroacoustic Waves

The existence condition of a non-trivial solution of system (8.9) is that its determinant has to be zero. Taking into the account the symmetry of tensor Γks gets the form ∗ Γ11 − ρU 2 Γ∗12 Γ∗13 Γ∗12 Γ∗22 − ρU 2 Γ∗23 = 0, (8.10) ∗ ∗ ∗ Γ13 Γ23 Γ33 − ρU 2 where Γ∗ks = Γks + γk γs / (k, s = 1, 2, 3). Equality (8.10) allows us to determine the velocity of the plane waves, → propagating along the direction of − n . This results to an equation of third order with respect to ρU 2 . In the general case, for the given direction in the piezoelectric crystal three velocities of propagation ρUj2 (j = 1, 2, 3) appear, which are determined as the positive roots of (8.10). Then, substituting each of (j) (j) Uj into (8.9), we ﬁnd Us and Φ(j) = γk Uk / , and due to the homogeneity (j) of (8.9) we can ﬁnd Us , Φ(j) , multiplied by an arbitrary constant, which may be found with the help of the additional condition of normalization. Thus, the problem of the determination of the velocity and the polarization → of plane waves propagating along the arbitrary direction − n of the piezocrystal is reduced to the determination of the characteristic values ρUj2 and the (j)

characteristic vectors Us of the tensor Γ∗ks . Here, Iit should be mentioned that due to the symmetry of tensor Γ∗ks its characteristic value are real quantities, and in addition because the quadrature form Uk Γks Us is positive [12], the characteristic values of the tensor Γ∗ks are also positive. For any of three plane waves, propagating in a piezocrystal medium in − → → the direction of − n , the displacement vector U (j) in the general case will not be parallel or perpendicular to the direction of propagation. However, − → → the wave with vector U (1) , forming the smallest angle in direction − n , is usually called quasilongitudinal and (Fig. 8.1) the two other waves with → − → − displacement vectors U (2) and U (3) are called quasi-transversal. Vectors →(3) − →(j) − →(2) − (j = 1, 2, 3) are perpendicular to each other. U U , U In order to study the propagation of the waves along the directions connected with the elements of symmetry of a piezocrystal, the expressions for the components of tensor Γ∗ks in the case of the piezoelectric medium of hexagonal class 6mm [68] are given by 2 E 2 E 2 E Γ11 = cE Γ12 = cE 11 n1 + c66 n2 + c44 n3 , 12 + c66 n1 n2 , E 2 E 2 E 2 Γ22 = cE Γ13 = cE 13 + c44 n1 n2 , 66 n1 + c11 n2 + c44 n3 , E 2 2 E 2 Γ33 = cE Γ23 = c13 + cE 44 n2 n3 , 44 n1 + n2 + c33 n3 , Γ21 = Γ12 , Γ∗11 = Γ11 +

Γ31 = Γ13 , γ12

,

Γ32 = Γ23 ,

Γ∗12 = Γ12 +

γ1 γ2 ,

Γ∗13 = Γ13 +

γ1 γ3 , (8.11)

8.1 Waves in a Homogeneous Medium

337

γ22 γ2 γ3 γ2 , Γ∗23 = Γ23 + , Γ∗33 = Γ33 + 3 , γ1 = (e15 + e31 ) n1 n2 , γ2 = (e15 + e31 ) n2 n3 , γ3 = e15 n21 + n22 + e33 n23 , where =ε11 n21 + n22 + ε33 n23 Using (8.10) and expressions (8.11), we can determine the velocity of longitudinal and transversal waves, propagating along axes x1 , x2 , x3 of the crystal of hexagonal class 6mm (axis x3 coincides with the axis of symmetry of the sixth order). We examine the following cases: Γ∗22 = Γ22 +

1) The plane wave is propagating along x1 -axis. Then n1 = 1, Γ∗22 = cE 66

n2 = n3 = 0, E = 0.5 cE 11 − c12 ,

Γ∗11 = cE 11 ,

Γ∗12 = Γ∗13 = Γ∗23 = 0,

Γ∗33 = cE 44 +

e215 . ε11

From (8.10) we ﬁnd 2 ρU11 = cE 11 ,

2 ρU12 = cE 66 ,

2 ρU13 = cE 44 +

e215 , ε11

(8.12)

where U11 is the velocity of the longitudinal wave propagating along x1 -axis; U12 , U13 are the velocities of the transversal waves. From now on we will make use of two indices, where the ﬁrst index is for the direction of the wave propagation, and the second one for the direction of the amplitude vector (polarization). 2) The plane wave propagates along x3 -axis. From (8.11) it follows Γ∗11 = cE 44 ,

Γ∗12 = Γ∗13 = Γ∗23 = 0,

Γ∗22 = cE 44 ,

Γ∗33 = cE 33 +

e233 , ε33

and from (8.10) we ﬁnd the velocity U33 of the longitudinal velocity and velocities U31 , U32 of two transversal waves 2 = cE ρU33 33 +

e233 , 33

2 ρU32 = cE 44 ,

2 ρU31 = cE 44 .

(8.13)

3) The plane wave propagates along x2 -axis. Then n2 = 1, Γ∗22 = cE 11 ,

n1 = n3 = 0, Γ∗33 = cE 44 +

Γ∗11 = cE 66 , e215 ε11

Γ∗12 = Γ∗13 = Γ∗23 = 0,

338

8 Electroacoustic Waves

and the velocity U22 of the longitudinal waves, and also the velocities U21 , U23 of two transversal waves are determined by 2 ρU22 = cE 11 ,

2 ρU21 = cE 66 ,

2 ρU23 = cE 44 +

e215 . ε11

(8.14)

4) The plane wave propagating in x1 = 0 plane in a direction which forms an angle 45◦ with x2 -axis. In this case n1 = 0,

E Γ∗11 = 0.5 cE 66 + c44 ,

1 n2 = n3 = √ , 2

0.5 (e15 + e31 )2 E Γ∗22 = 0.5 cE + c , 13 44 + ε11 + ε33 0.5 (e15 + e31 ) (e15 + e33 ) E = 0.5 cE , 13 + c44 + ε11 + ε33 0.5 (e15 + e33 )2 E = 0.5 cE . 33 + c44 + ε11 + ε33

Γ∗12 = Γ∗13 = 0, Γ∗23 Γ∗33

Solving (8.10) we obtain 2 E ρU(1) = 0.5 cE 66 + c44 , 2 ρU(2) 2 ρU(3)

2 2 = 0.5 (Γ∗33 + Γ∗22 ) + 0.25 (Γ∗33 − Γ∗22 ) + (Γ∗23 ) , 2 2 = 0.5 (Γ∗33 + Γ∗22 ) − 0.25 (Γ∗33 − Γ∗22 ) + (Γ∗23 ) .

(8.15)

8.2 General Representations of Coupled Fields in a Medium of the Hexagonal Class of Symmetry Let a piezocrystal of hexagonal class of symmetry 6mm, in the Cartesian system of coordinates x1 , x2 , x3 , be subjected to mechanical and electric loading harmonic in time, independent of the x3 -coordinate. If we suppose that the x3 -axis is the axis of symmetry of the sixth order, from the material equations [25] at ε33 = 0 given by D σ11 = cD 11 ε11 + c12 ε22 − h31 D3 ,

σ22 = σ33 =

D cD 12 ε11 + c11 ε22 − h31 D3 , cD 13 (ε11 + ε22 ) − h33 D3 ,

D σ12 = cD 11 + c12 ε12 , ε D3 , E3 = −h31 (ε11 + ε22 ) + β33 σ13 = 2cD 44 ε13 − h15 D1 , E1 = −2h15 ε13 +

ε β11 D1 ,

σ23 = 2cD 44 ε23 − h15 D2 ,

ε E2 = −2h15 ε23 + β11 D2 ,

(8.16)

8.2 General Representations of Coupled Fields

339

and also from (8.1) and (8.2) it follows, that the two-dimensional state of the piezocrystal can be divided into plane and antiplane deformations. In the ﬁrst case we have the following components of the electromagnetic ﬁeld σij = Re {Sij (x1 , x2 ) exp (−iωt)} ,

(8.17)

E3 = Re {E ∗3 (x1 , x2 ) exp (−iωt)} , D3 = Re {D3∗ (x1 , x2 ) exp (−iωt)} , Hi = Re {Hi∗ (x1 , x2 ) exp (−iωt)}

(i, j = 1, 2) .

In this case Maxwell’s (8.2) read ∂ 1 E3 = μ

∂ H2 , ∂t

∂ 2 E3 = −μ

∂ 1 H2 − ∂ 2 H1 =

∂ D3 , ∂t

∂ H1 , ∂t

(8.18)

∂ 1 H1 + ∂ 2 H2 = 0.

Our aim is to construct general representations of the solutions of the system of (8.1), (8.16), (8.18). For this purpose we should introduce vector → − → − → − potential A = (0, 0, A) by setting H = rot A . In that case, the last equation in (8.18) is fulﬁlled automatically, and taking into account (8.16) the other equations take the form of ∇2 A = iωD3∗ ,

→ − ε iωμA + h31 div U − β33 D3∗ = C.

(8.19)

→ − Here U is the peak value of the displacement vector; C is a constant, which is assumed to be equal to zero according to the conditions of radiation. Taking into account (8.16) and Cauchy relations the equations of motion (8.1) are given by → − → − → − ∇2 U + σ1 graddiv U + γ22 U − σ2 gradD3∗ = 0, γ22 =

2

2ρω , D cD 11 − c12

σ1 =

cD 11 cD 11

+ −

cD 12 , cD 12

σ2 =

(8.20) 2h31 . D cD 11 − c12

Eliminating D3∗ , the system of (8.19), (8.20) gives rise to two coupled equations with respect to the vector of mechanical displacement and vector → − potential A = (0, 0, A) → − → − → − ∇2 U + σ · graddiv U + γ22 U + χ · gradA = 0 → − ∇2 A + k 2 A = αdiv U .

(8.21)

340

8 Electroacoustic Waves

Here γ22 − 1, γ12

σ=

c1 =

α=

γm =

2 cD 11 − κ0 , ρ

iωh31 ε , β33

ω , cm

c2 =

κ20 =

h231 ε , β33

k=

ω cα

D cD 11 − c12 , 2ρ

χ=

(m = 1, 2) , cα =

ε β33 , μ

2k 2 h D 31 D . iω c11 − c12

The quantity κ0 characterizes the piezoelectric eﬀect. The displacement vector reads [144] − → → − U = gradΦ + rot k Ψ , (8.22) → − where Φ and Ψ are scalar functions to be determined; k is the unit vector. Substituting (8.22) into (8.21) we come to a system of three diﬀerential equations (1 + σ) ∇2 Φ + γ22 Φ + χA = 0, 2

2

∇2 Ψ + γ22 Ψ = 0,

(8.23)

2

∇ A + k A = α∇ Φ. Further, eliminating A from the ﬁrst equation of (8.23) and substituting the outcome into the last equation we ﬁnd 2 ∇ + β12 · ∇2 + β22 Φ = 0, (8.24) 2 2 β1 = 0.5 (γ1 + k) + δ02 + (γ1 − k) + δ02 , 2 2 (γ1 + k) + δ02 − (γ1 − k) + δ02 , β2 = 0.5 δ02 =

κ20 k 2 . − κ20

cD 11

In the class of continuous functions the general solution of (8.24) may be written in the form Φ = Φ 1 + Φ2 , (8.25) oltz The functions = 1, 2) represent the arbitrary solutions of Helmh¨ Φm 2(m Φm = 0. According to this the integration of the last equations ∇2 + βm (8.23) allows us to determine function A A=α

2 2

βm Φm . 2 β − k2 m=1 m

(8.26)

8.2 General Representations of Coupled Fields

341

The other mechanical and electric quantities due to (8.16), (8.18) and (8.22) are expressed by three functions Ψ and Φm (m = 1, 2) in the following way [146] S11 + S22 = −

2 2κ20 βm 2 D βm + c + cD Φm , 11 12 2 k 2 − βm m=1 2

(8.27)

∂2 D S22 − S11 + 2iS12 = −4 cD − c (Φ + iΨ) , 11 12 ∂ z2 ∂2 D S22 − S11 − 2iS12 = −4 cD (Φ − iΨ) , 11 − c12 ∂ z¯2 2 2 2 4

βm Φm Φm h31 βm ∗ 2 ∗ E3 = h31 k , D = , 3 ε 2 − β2 2 − β2 k β k m m 33 m=1 m=1 → − → − z¯ = x1 − ix2 . H = rot A , z = x1 + ix2 , If from inﬁnity, at angle β with axis Ox1 , travelling monochromatic waves are radiated, and functions Ψ0 and Φ0ν (ν = 1, 2) describe them. From (8.23) and (8.24) it is easy to deduce their forms → − → −

Φ01 = B1 e−iβ1 x · n , → − → −

Ψ0 = B3 e−iγ2 x · n ,

→ − → −

Φ02 = B2 h31 e−iβ2 x · n , (8.28) → − − → n = (cos β, sin β) , x = (x1 , x2 ) .

Here Φ0ν and Ψ0 are the amplitude values of the corresponding potentials. The quantities βν are determined in (8.24), Bν are complex constants. The multiplier h31 is introduced into the expression for Φ02 to deal with the limiting case of an isotropic medium (κ0 = 0). The electroacoustic magnetic wave ﬁeld, corresponding to the three above-mentioned waves, are determined by functions (8.28) using (8.22), (8.26), (8.27). From the analysis it follows that when the plane monochromatic waves are excited in the unbounded piezoelectric of class 6mm, the shear wave does not cause a coupled electromagnetic wave. However, generally speaking “pure”waves of expansion and “pure” electromagnetic waves do not exist by themselves. Thus, when there is radiation of the transverse SV-wave and quasilongitudinal wave of “type β1 ” and “type β2 ”, in each of them appear coupled mechanical and electromagnetic ﬁelds. From (8.24) we obtain the asymptotic equalities β2 = k + O k 3 . (8.29) β1 = γ1 + O k 2 , Therefore, the wave of “type β1 ” is propagated with a velocity close to the velocity of propagation of the wave of expansion - compression (P -waves), whole the wave of “type β2 ” is propagated with velocity close to the velocity of electromagnetic wave cα .

342

8 Electroacoustic Waves

8.3 An Unbounded Medium with Tunnel Cracks. Integral Representations of Complex Potentials Consider a transversal-isotropic piezoelectric medium, weakened by cracks Lj (j = 1, 2, . . . , n) with generators parallel to the axis of symmetry x3 . Plane monochromatic waves determined by equalities (8.28) are radiated from inﬁnity to the cracks,and their edges L j the constant, along axis x3 , loading Xm (x1 , x2 , t) = Re Pm (x1 , x2 ) e−iωt (m = 1, 2) may act. Assume that Pm and the curves of contour Lj are ‘ functions of class H on L = ∪Lj . The problem is the determination of the components of electroelastic magnetic ﬁeld (8.17) and the stress intensity factors KI and KII . Considering the full boundary problem, i.e. the one arising without neglecting, as usual, the magnetic ﬁeld. In this case we proceed using the general representations of mechanical and electromagnetic ﬁelds (8.27). The functions Ψ and Φm (m = 1, 2), which represent arbitrary solutions of the corresponding equations of Helmh¨ oltz-type, are determined from the mechanical boundary conditions on the edges of the cuts (8.30) (σ11 + σ22 )± − e2iψ (σ22 − σ11 + 2iσ12 )± = ±2eiψ X1± − iX2± , and also from electromagnetic boundary conditions E3+ = E3− ,

H1+ = H1− ,

H2+ = H2− .

(8.31)

Here the signs “plus” and “minus” correspond to the left and right edges Lj , respectively (at movement from beginning aj to end bj ); ψ is the angle between the normal to the left edge and axis Ox1 . In what follows we will + − = −Xm . assume that Xm To reduce the stated boundary problems to integral equations we will write the integral representations of sought-for functions Φν and Ψ in the form [146] ⎧ ν 2 (1) 2 ⎨ (−1) k − βν ∂ H0 (βν r) (1) dζ+ Φν (z) = q1 H0 (βν r) ds + q2 2 2 2 βν (β2 − β1 ) ⎩ ∂ζ L L (1) ∂ H0 (βν r) ¯ +q3 (8.32) dζ + Φ0ν (z) , ∂ ζ¯ ⎧ (1) k2 ⎨ ∂ H0 (γ2 r) (1) dζ− Ψ (z) = 2 2 q4 H0 (γ2 r) ds + q2 iβ1 β2 ⎩ ∂ζ L L (1) ∂ H0 (γ2 r) ¯ −q3 dζ + Ψ0 (z) , ∂ ζ¯ r = |ζ − z| ,

ζ = ξ1 + iξ2 ,

ζ¯ = ξ1 − iξ2 ,

ζ ∈ L = ∪Lj ,

z = x1 + ix2

(ν = 1, 2) ,

8.3 An Unbounded Medium with Tunnel Cracks

343

and sought-for densities qm m = 1, 4 are directly expressed by the jumps of displacements [Uk ] (k = 1, 2) as follows γ12 −iψ m e (m = 1, 4) , (8.33) R1 − (−1) eiψ R2 8i iγ 2 iγ 2 q2 = q2 (ζ) = 12 e−iψ R1 , q3 = q3 (ζ) = 12 eiψ R2 , 2γ2 2γ2 dRm m (m = 1, 2) . Rm = Rm = Rm (ζ) = [U1 ] − (−1) i [U2 ] , ds qm = qm (ζ) =

In (8.32) the summands Φ0ν and Ψ0ν correspond to plane monochromatic waves, the integral terms express the dispersed by defects coupled wave ﬁelds; (1) ds is the element of the length of contour L, Hp (x) is the Hankel function of the ﬁrst kind and of p - order. It should be mentioned, that for the functions qm m = 1, 4 the following relations, derived by (8.33) are valid γ12 [Un ] , 4i 2 iγ q2 (ζ) = 12 (V + iV ∗ ) , 2γ2 [Us ] , V = [Un ] − ρ∗

q1 (ζ) =

γ12 [Us ] , 4 2 iγ q3 (ζ) = 12 (V − iV ∗ ) , 2γ2 [Un ] V ∗ = [Us ] + . ρ∗ q4 (ζ) =

(8.34)

Here Un and Us are the amplitudes of normal and transversal components of the displacements vector on L respectively; ρ∗ is the radius of contour curve L at point ζ. The construction of representations (8.32) is not at all a trivial operation and requires further explanation. Functions Ψ and Φν should be the solutions of the corresponding Helmh¨ oltz equations and satisfy the conditions of radiation. Besides, representations (8.32) should provide the availability of the jump of the displacement vector and the continuity of the stress vector, and also the fulﬁllment of electromagnetic conditions (8.31) on L. The indicated conditions due to (8.22), (8.27), (8.30) should have the form 2

2iψ ∂ 2 D e αν [Φν ] = −4 cD − c (Φ + iΨ) , (8.35) 11 12 ∂ζ 2 ν=1 2

−2iψ ∂ 2 D D αν [Φν ] = −4 c11 − c12 e 2 (Φ − iΨ) , ∂ζ ν=1 2 2 ∂ βν2 Φν ∂ βν2 Φν = 0, = 0, ∂ ζ ν=1 k 2 − βν2 ∂ ζ¯ ν=1 k 2 − βν2 2

βν2 [Φν ] 2κ20 βν2 2 D D = 0, α = −β + c + c , ζ ∈ L, ν ν 11 12 k 2 − βν2 k 2 − βν2 ν=1 where symbol [•] denotes a jump of the corresponding quantity on L.

344

8 Electroacoustic Waves

Representations (8.32) were constructed in such a way, that conditions (8.35) are automatically satisﬁed. In this case the remaining two complex functions [Un ] and [Us ] are required for the satisfaction of the other mechanical boundary conditions on the cracks. It should be mentioned that under this approach, the solution of the dynamic problem of electroelasticity for bodies with cracks, the mechanical and electromagnetic quantities are expressed in terms of three functions, which are the solutions of the corresponding Helmh¨ oltz equations. That is why the solution of such problems is a rather diﬃcult task; functions Ψ and Φν (ν = 1, 2) are solutions of second order diﬀerential equations and the boundary conditions on the cuts contain second order derivatives of these functions. As a result, if we use the method of integral equations, the obtained boundary integral equations contain non-integrated singularities. To overcome this diﬃculty when constructing integral representations (8.32) we used the approach presented in [187], due to which the combinations ∂ 2 (Φ + iΨ)/∂z 2 and ∂ 2 (Φ − iΨ)/∂z 2 appearing in the boundary condition (8.30) and the non-integrated singularities caused from potential and vortex solutions cancel each other.

8.4 Integrodiﬀerential Equations of a Boundary Problem Passing to the amplitude values in boundary conditions (8.30) we will write ±

±

(S11 + S22 ) − e2iψ (S 22 − S11 + 2iS12 ) = ±2eiψ (P1 − iP2 ) , ±

(8.36)

±

(S11 + S22 ) − e−2iψ (S 22 − S11 + 2iS12 ) = ±2e−iψ (P1 + iP2 ) . Due to the fact that integral representations (8.32) provide automatically the continuity of the stress vector on L, it is enough to satisfy each of the conditions (8.36) on one of the edges of the cuts, e.g. on the left one. Further, omitting the lower signs in (8.36) and using relation (8.27), we can express con+ − = −Pm = Pm ; m = 1, 2) dition (8.36) directly in terms of solvable functions (Pm + ∂2 (Φ + iΨ) = 2eiψ (P1 − iP2 ) , (8.37) 2 ∂ z ν=1 + 2

D −2iψ ∂ 2 + D αν Φν + 4 c11 − c12 e (Φ − iΨ) = 2e−iψ (P1 − iP2 ) . 2 ∂ z ¯ ν=1 2

αν Φ+ ν

2iψ D + 4 cD 11 − c12 e

8.4 Integrodiﬀerential Equations of a BoundaryProblem

345

Substituting the limiting values in functions (8.37) we arrive at a system of two complex singular integrodiﬀerential equations with respect to the jumps of the amplitude of displacements on L 2

{fm (ζ) Gmν (ζ, ζ0 ) + fm (ζ) gmν (ζ, ζ0 )}ds = Nν (ζ0 ),

m=1 L

dfm (ν = 1, 2) , ds iγ 2 cD − cD 12 ±2iψ0 G1ν (ζ, ζ0 ) = 21 K1 sin (ψ − α0 ) ± 11 e (F1 e±i(ψ−3α0 ) + γ2 2 +F2 eiεν (ψ+α0 ) + T1ν (ζ, ζ0 ) ,

f1 (ζ) = [Un ] ,

f2 (ζ) = [Us ] ,

fm =

(8.38)

iγ12 cD − cD 12 ±2iψ0 e K1 cos (ψ − α0 ) − 11 (F1 e±i(ψ−3α0 ) − 2 γ2 2i −F2 eiεν (ψ+α0 ) + T2ν (ζ, ζ0 ) ,

G2ν (ζ, ζ0 ) =

cD − cD γ12 G2ν (ζ, ζ0 ) 12 K0 + γ12 11 Φ22 e±2i(ψ0 −α0 ) + , 2i 2i ρ∗ cD − cD G1ν (ζ, ζ0 ) 12 g2ν (ζ, ζ0 ) = ±γ22 11 H2 (γ2 r0 ) e±2i(ψ0 −α0 ) − , 2 ρ∗ g1ν (ζ, ζ0 ) =

T1ν (ζ, ζ0 ) = Tν (ζ, ζ0 ) ,

T2ν (ζ, ζ0 ) = Tν (ζ, ζ0 ), −iψ D + ei(ψ−2α0 ) eiψ 2 2iψ0 e c11 + cD 2Im − 2κ − ie T1 (ζ, ζ0 ) = , 12 0 ζ − ζ0 ζ − ζ0 −iψ D − ei(ψ−2α0 ) eiψ D 2 2iψ0 e T2 (ζ, ζ0 ) = −e , c11 + c12 − 2κ0 2Re ζ − ζ0 ζ − ζ0 γ2 (1) (1) K0 = c∗2 H0 (β2 r0 ) − c∗1 H0 (β1 r0 ) , F1 = 12 Φ33 + γ2 H3 (γ2 r0 ) , γ2 γ2 K1 = c∗2 β2 H1 (β2 r0 ) − c∗1 β1 H1 (β1 r0 ) , F2 = 12 Φ31 − γ2 H1 (γ2 r0 ) , γ2 2 m−2 2 2 −1 2 Φmn = β2 − β1 β2 k − β2 Hn (β2 r0 ) − β1m−2 k 2 − β12 Hn (β1 r0 ) , −1 2 D D 2 2 βi c11 + cD c11 + cD , c∗i = β22 − β12 12 − 2κ0 − k 12 2i 4i (1) (1) H1 (x) = + H1 (x) , H2 (x) = + H2 (x) , πx πx2 16i 2i (1) + H3 (x) , H3 (x) = + r0 = |ζ − ζ0 | , α0 = arg (ζ − ζ0 ) , 3 πx πx Nν (ζ0 ) = 4e±iψ0 (P1 + εν iP2 ) + 2 exp (−iλ (ξ10 cos β + ξ20 sin β)) × γ12 πγ22 γ12 πγ22

346

8 Electroacoustic Waves

⎧ 2 ⎨

2κ20 βj2 × βj h j B j + + 2 ⎩ k − βj2 j=1 ⎫ 3 ⎬

D ±2i(ψ0 −β) hj Bj , +λ2 cD 11 − c12 e ⎭ cD 11

cD 12

j=1

ψ0 = ψ (ζ0 ) ,

ζ = ξ1 + iξ2 ,

εν = (−1) ,

h1 = 1,

ν

ζ0 = ξ10 + iξ20 ;

h2 = h31 ,

ζ, ζ0 ∈ L,

h3 = ±i.

Here, the upper signs correspond to index ν = 1; the lower to ν = 2; β is the angle between the normal to the front of the incident wave and Ox1 -axis; the quantities αν (ν = 1, 2) are deﬁned in (8.35). Kernels Gmν , gmν have singular character of Cauchy type at the expense of functions T1 and T2 . Depending on the type of the monochromatic wave the parameter λ may take the values β1 , β2 and γ3 . It is interesting to note, that if the cracks are direct (ρ∗ = ∞), the kernels gmν are simpliﬁed and may posses not more than one logarithmic singularity. To complete the algorithm it is required to add the following additional conditions to the integral (8.38) [Un ]ds = 0, [Us ]ds = 0 (j = 1, 2, . . . , n) , (8.39) Lj

Lj

expressing the equality to zero of the jumps of the displacements at tips L. Thus, the constructed algorithm of solution of the boundary problem of a piezoceramic medium with cuts is reduced to the following. From system (8.38), (8.39) we determine the jumps of the amplitudes of normal and transversal displacements on the cuts. Further, by this functions with the help of representations (8.32) we restore potentials Φν and Ψ. Then by formulas (8.22), (8.27) we calculate the components of the electroacoustic magnetic ﬁeld in the medium. It should be mentioned that the solution of the boundary problem should be constructed in such way, that we could obtain the limiting case of the isotropic medium at h31 = 0. Actually, if there is no radiation from inﬁnity, and if a mechanical loading acts on the edges of the cuts, from systems (8.38), (8.39) we obtain the ﬁnite values of quantities [Un ] and [Us ] at h31 = κ0 = 0. Substituting (8.32) into (8.27) and (8.26) we conclude that the components of the electromagnetic ﬁeld are equal to zero, which is a requirement in the case of an isotropic medium. We come to the same conclusion, in those situations, where a mechanical shear wave or a quasilongitudinal wave of “type β1 ” radiates from inﬁnity. We have a quite diﬀerent picture when a wave of “type β2 ” radiates from inﬁnity. In that case the right sides of (8.38) are proportional to quantity κ0 and hence, in the limits of κ0 → 0, [Un ] = [Us ] = 0. From (8.26), (8.27) and (8.32)

8.4 Integrodiﬀerential Equations of a BoundaryProblem

347

we conclude, that in that case the mechanical stresses and displacements are equal to zero, and there is only an incident electromagnetic wave. In order to determine the dynamic stress intensity factors KI and KII it is necessary to ﬁnd the main asymptotics of stresses in the vicinity of the tips. It is recommended to consider the following combination 2 (N − iT ) = S11 + S12 − e2iψ (S22 − S11 + 2iS12 ) ,

(8.40)

2 (N + iT ) = S11 + S12 − e−2iψ (S22 − S11 − 2iS12 ) , where N and T are the normal and tangential stresses on the area which is the continuation of the crack beyond its tip; these combinations of the stress amplitude are expressed as potentials Φν (ν = 1, 2) and Ψ by formulas (8.27). Leaving only the main terms (i.e. the integrals containing Cauchy kernels) in these expressions, we ﬁnd as a result of transformations ⎫ ⎧ ⎨ ¯ 1 D q2 dζ q3 dζ ⎬ 0 0 2 + + S22 =− S11 c11 + cD , (8.41) 12 − 2κ0 ⎩ ζ −z πi ζ¯ − z¯ ⎭ L

0 0 0 − S11 + 2iS12 S22

⎧ ⎨ dR 1 D 2 c12 − cD + = 11 ⎩ ζ −z πi

L

L

⎫ γ22 γ22 q2 e−2iα dζ q3 e−2iψ dζ ⎬ + 1− 2 + 1+ 2 , γ1 ζ −z γ1 ζ −z ⎭ L

0 0 0 − S11 − 2iS12 S22

L

⎧ ⎨ dR 1 D 1 c12 − cD = + − 11 ⎩ πi ζ¯ − z¯ L

⎫ q3 e2iα dζ¯ q2 e2iψ dζ¯ ⎬ γ22 γ22 + 1− 2 + 1+ 2 , γ1 γ1 ζ¯ − z¯ ζ¯ − z¯ ⎭ L

α = arg (ζ − z) .

L

The “densities” Rm , qm are deﬁned in (8.33). Introducing the parameterization of the crack contour ζ = ζ(δ)(−1 ≤ δ ≤ 1) and taking into account, that the solution of integral (8.38), (8.39) are sought in the class of functions which are unbounded at tips L (with the order of singularity σ = 1/2) we write [Un ] =

s

Ω1 (δ) √ , (δ) 1 − δ 2

Ωm (δ) ∈ H [−1, 1]

[Us ] =

s

(m = 1, 2) .

Ω2 (δ) √ , (δ) 1 − δ 2

(8.42)

348

8 Electroacoustic Waves

Due to the formulas describing the behavior of the integrals of Cauchy type in the vicinity of the ends of the integration line, and also the asymptotic relations [50] ω (ζ) e−2iα dζ e±iγπ ω ∗ (c) h (z) 1 =± + F0 (z) , (8.43) 2πi ζ −z 2i sin γπ (z − c)γ L

ω (ζ) =

ω ∗ (ζ) , (ζ − c)γ

0 < Reγ < 1

We conclude, that the integrals into (8.41) possess a singularity root at tip c. Using these formulas we can write out the main asymptotic combination of the amplitudes of stresses Sij 0 0 S11 + S22 =−

Ω1 (±1) γ12 D 2 , c11 + cD 12 − 2κ0 " ∗ 2 γ2 2r s (±1)

0 0 0 S22 − S11 + 2iS12 =− 0 0 0 S22 − S11 − 2iS12 =

−2iψ(±1) Ω2 (±1) iγ12 D D 2 e " , c + c − 2κ 12 0 γ22 11 2r∗ s (±1)

(8.44)

2iψ(±1) Ω2 (±1) iγ12 D D 2 e " . + c − 2κ c 11 12 0 γ22 2r∗ s (±1)

Here the lower sign corresponds to c = a, the upper one to c = b, and r∗ is the distance from the point to the tip. Substituting (8.44) in (8.40) we determine the stress intensity factors √ √ (8.45) KI± = 2πr∗ σn = 2πr∗ N 0 cos (ωt − arg Ω1 (±1)) , √ √ 0 ± ∗ K = 2πr∗ τn = 2πr∗ T cos (ωt − arg Ω2 (±1)) , (r → 0) , II

where N0 =

Ω1 (±1) γ12 D 2 c11 + cD , 12 − 2κ0 " ∗ 2 2γ2 2r s (±1)

T0 =

Ω2 (±1) γ12 D 2 c11 + cD . 12 − 2κ0 " ∗ 2 2γ2 2r s (±1)

Thus, the factor KI is expressed as a normal component and the quantity KII as a tangential component of the jump of the displacement vector on L.

8.5 Reducing to a Case of an Isotropic Medium Returning to the main system of diﬀerential (8.21), in the second equation we can neglect the term k 2 A when compared to the term ∇2 A, which corresponds to the quasistatic approximation. Taking into account (8.19) we obtain D3∗ =

→ − h31 ε div U . β33

(8.46)

8.5 Reducing to a Case of an Isotropic Medium

349

Substituting D3∗ in the equation of motion (8.20) we ﬁnd → − → − → − ∇2 U + σgraddiv U + γ22 U = 0, c∗ + c∗12 2 , c∗11 = cD σ = 11 11 − κ0 , c∗11 − c∗12

(8.47) 2 c∗12 = cD 12 − κ0 .

Thus, we have a usual equation of motion (in amplitudes) of some ﬁctitious isotropic medium with elastic parameters c∗ij . According to relations (8.21) the wave numbers γi (i = 1, 2), are also expressed in terms of these parameters. The mechanical meaning of the carried out simpliﬁcations is made clear when studying the general representations (8.27). Here in the expressions for mechanical quantities and for the term corresponding to m = 1, the quantity k 2 may be neglected with respect to the term β12 (β1 ∼ = γ1 ), and as a result in all the mechanical combinations are embedded only in c∗ij . The dynamic problem in the theory of elasticity of isotropic media with curvilinear cuts was considered in [175, 176]. The integral representations of the solutions used in [176] were constructed by the method of the theory of potential read (with negligible changes) → − →(m) ∂ Uν j (m) 2 − nj ds, (−1) Sν,3−j (8.48) ∂ j Um = − + ρω U · U ∂s L

∂ j = ∂/∂ xj ,

− → n = (cos ψ, sin ψ)

(j, ν, m = 1, 2) .

→ − Here [•] denotes the jump of the corresponding quantity on L; U = → − (U1 , U2 ) is the amplitude vector of the elastic displacement at point ζ ∈ L; U m (m) and Sνj are the displacement vector and stress tensor of the m-th state, respectively, corresponding to the action of the concentrated force at point z0 = (x10 , x20 ) in the direction xm ; ψ is the angle between the normal to light edge L (at motion from beginning aj to end bj ) and Ox1 - axis; ρ is the material density; ω is the circular frequencies; ν is the index of summation. Taking into account that the stress vector is continuous across the cut the → (m) − quantities Skj , U (m) are determined by the fundamental solution of the biwave equation [134] (1)

E (z, z0 ) =

(1)

H0 (γ 2 r) − H0 (γ1 r) , 2ic∗11 (c∗11 − c∗12 ) (γ22 − γ12 )

z = x1 + ix2 ,

r = |z − z0 |

using the formulas c∗11 − c∗12 (m) + c∗12 δνj Ui , ∂ j Uν(m) + ∂ ν Uj 2 c∗ + c∗12 2 c∗ + c∗12 ∂ m + ρω 2 , ∂ 1∂ 2. = c∗11 ∇2 − 11 A12 = A21 = − 11 2 2

Uν(m) = Aνm E, Amm

(m)

Sνj =

350

8 Electroacoustic Waves

In [176] the system of integrodiﬀerential equations of the equations of the dynamic boundary problem for an isotropic medium with cuts is obtained using (8.48). This system can be written in the compact form of 2

{Rm (ζ) Gmν (ζ, ζ0 ) + Rm (ζ) gm (ζ, ζ0 )} ds = Nν (ζ0 ) ,

m=1 L

πγ 2 eiψ0 πi + F31 sin (ψ0 − α0 ) + (−1)m 2 p1m Φ11 × Gmm = Im ζ − ζ0 2 8 γ22 dRm × 3 − 2 − 2¯ , p21m (ζ) = (ν, m = 1, 2) , Rm γ1 ds (−1)m ip3m 1 + p21m π m Gmν = − (−1) p3m F31 + F33 p21m 2r 4 2 γ22 m γ2 + (−1) (ν = m) , 3 − 2 Φ11 2 γ1 πiγ22 p1m γ22 γ22 2 gmm = (8.49) 2γ2 Φ00 − 1 + 2 Φ20 + 1 − 2 p22m Φ 16p2m γ1 γ1 2¯ p21m p22m 2 γ1 + γ22 Φ20 − 2γ12 γ22 Φ00 , 22 − γ22 − γ12 πiγ22 p3m γ22 γ22 2 2 2 gmν = 2γ2 Φ00 − 1 + 2 Φ20 + 1 − 2 p2m Φ22 − 2p1m Φ22 16p2m γ1 γ1 (ν = m) , (1)

Φmν =

Nν = Nν0 +

2 2

k=1 j=1

(1)

Nνk =

(2)

(j)

Nνk ,

πiγ22 σk

Nν0 =

(γ22

F3ν = Φ3ν +

−

2πγ22 2 γ1 ) (c∗11

2i , πr

− c∗12 )

ν

[P1 − (−1) iP2 ] ,

ν

exp [−iγ1 ξk0 + (−1) iψ0 ] ×

(−1)k γ 2 ν+1 1 exp (−1) 2iψ0 − 2 , γ2 − γ12

γ #1

× Nνk =

(1)

γ2m Hν (γ2 r) − γ1m Hν (γ1 r) , γ22 − γ12

ν

(−1) πγ23 τk exp (−iγ2 ξk0 ) exp [(−1)ν iψ0 ] , γ22 − γ12

p11 = p¯12 = exp [i (ψ0 − α0 )] ,

p21 = p¯22 = exp [i (ψ − α0 )] ,

p32 = p¯31 = exp [i (ψ0 + α0 )] , ζ = ξ1 + iξ2 , ψ0 = ψ (ζ0 ) ,

r = |ζ − ζ0 | , α0 = arg (ζ − ζ0 ) , ζ0 = ξ10 + iξ20 , ζ, ζ0 ∈ L = ∪Lj ,

where functions Rm (ζ) (m = 1, 2) are deﬁned in (8.33).

8.5 Reducing to a Case of an Isotropic Medium

We add the following conditions to the system (8.49) Rm (ζ) ds = 0 (m = 1, 2; j = 1, 2, . . . , n) .

351

(8.50)

Lj

It is of interest to mention, that based on integral representations (8.48), and taking into account relations (8.34) as well as equalities R1 =

dR1 = eiψ (V + iV ∗ ) , ds

R2 =

dR2 = e−iψ (V − iV ∗ ) ds

the formulas for the stress intensity factors, coincide with formulas (8.45). Hence, the intensity factors KI and KII both in precise and in the approximate variant of the solutions of the problem are determined by the same expressions. However, in the ﬁrst case, the functionals Ων (±1) are calculated from the system of integral (8.38), (8.39), and in the second case from system (8.49), (8.50). The relative stress intensity factors read

$ ±% γ 2 (c∗11 + c∗12 ) −iψ(±1) m e Ω1 (±1) − (−1) eiψ(±1) Ω2 (±1) , Km = 12 " 4γ2 Λ s (±1) Ωj (δ) √ Rj (ζ) = , δ ∈ [−1, 1] (j, m = 1, 2) . s (δ) 1 − δ 2 as a function of the normalized wave number γ2 (2 is the length of the crack). In case of diﬀraction on a parabolic crack ξ1 = δ, ξ2 = p∗ δ 2 in correspondence with quasilongitudinal and transversal waves propagating along the negative direction of axis x2 , is shown in Figs. 8.2 and 8.3. The lines with number m are constructed for p∗ = 0.2 (m − 1). Assuming theknowledge of +

1.40

1.05

1 2 3 4

0.70

0.35

0.00 0.00

γ 2l 0.75

K1±

1.50

2.25

3.00

Fig. 8.2. Changes of quantity < > as a function of normalized wave number γ2 l at studying of a quasilongitudinal wave in the medium of a parabolic crack

352

8 Electroacoustic Waves +

1.2

1 2 0.9

3 0.6 4

γ 2l

0.3 0

1

$

+ KII

2

3

%

Fig. 8.3. Changes of quantity as a function of γ2 l under the inﬂuence of a transverse wave in a medium with a parabolic crack

KI and KII , the stress intensity factors may be determined by the formulas √ $ ±% ± Km = ±Λ π Km (m = 1, 2) , cos (ωt − arg Ωm (±1)) from the system of (8.49), (8.50), where the functions Ωm (δ) are calculated 2 is used in case of the radiation of a where quantity Λ = |τ | γ1 cD − κ 11 0 D − c quasilongitudinal wave, and Λ = |τ | γ2 cD /2 is used under the in11 12 ﬂuence of the shear wave (τ = const is the amplitude of displacement in the $wave). % $ +% are shown in Figs. 8.4 and 8.5, respectively,, In the KI+ and KII case where there are no radiations from inﬁnity, and on the edges of the cracks there are prescribed normal (P1 = P cos ψ0 , P2 = P sin ψ0 ) or tangential (P1 = P sin ψ0 , P2 = −P cos ψ0 ) forces (Λ = |P |). +

1.4

1 2 3 1.0

4

0.6

γ 2l

0.2 0

1

2

3

Fig. 8.4. Changes of < KI± > as a function of γ2 l under the inﬂuence of normal forces on a parabolic crack

8.6 Eﬀect of Mutual Hardening of Cracks

353

1.6

4 1.3 3 2 1.0

1

γ 2l

0.7 0

1

2

3

± Fig. 8.5. Changes of < KII > as a function of γ2 l under the inﬂuence of tangential forces on a parabolic crack

From the results it follows that with increasing curve parameter p∗ the peak values of quantity γ2 are displaced to the left, and the maximum of quantity KI is decreased. As it is shown in Fig. 8.5, the increase of the cut curvature under the inﬂuence of transversal stress brings to an increase of maximum KII .

8.6 Eﬀect of Mutual Hardening of Cracks When two or more cracks interact in a body, there may be situations where hardening in a speciﬁed sense takes place, i.e. the absolute values of the corresponding stress intensity factors at the tips of one of a crack may decrease at the expense of an inﬂuence of other cracks. We consider the numerical solution of (8.49), (8.50) in the case of a piezoelectric medium, containing two cracks. Here the algorithm is reduced to the solution of eight real integrodiﬀerential equations (for a case of a singular crack they are four). In order to reduce the number of equations we will indicate below a scheme of numerical solution of the system of integral equations. The method successively decreases the dependence on the coupling in the considered area. We set the cut L1 as a main one and we introduce the integral (8.49) together with additional conditions (8.50) to the system of linear algebraic equations. 2 n

j=1 ν=1 2 n

j=1 ν=1

∗ ∗ αij (δν , δm ) Ωjν = Ni (δm )−

2 n

∗ αij (Δν , δm )Λjν ,

j=1 ν=1

αij (δν , Δ∗m ) Ωjν = Ni (Δ∗m ) −

2 n

j=1 ν=1

αij (Δν , Δ∗m )Λjν ,

(8.51)

354 n

8 Electroacoustic Waves n

Ωiν = 0,

ν=1

(i = 1, 2; m = 1.2, . . . , n − 1) ,

Λiν = 0

ν=1

αij (xν , ym ) =

n π 2π Gij (xν , ym ) − 2 gij (xk , ym ) Sνk S (xk ) sin θk , n n k=1

Ωj (δ) dRj , = √ dδ 1 − δ2 Sνk =

n−1

=1

Ωj (δ) ,

dRj Λj (Δ) , = √ dΔ 1 − Δ2

cos θν sin θk ,

θν =

2ν − 1 π 2n

Λj (Δ) ∈ H [−1, 1]

Ωjν = Ωj (δν ) ,

Λjν = Λj (Δν ) ,

(ν = 1, 2, . . . , n) ,

(j = 1, 2) .

Here the contour L1 is described by the parameter δ ∈ [−1, 1], contour L2 by the parameter Δ ∈ [−1, 1] ; δν , Δν are the zeros of the Chebyshev polynomial of the ﬁrst kind; δν∗ , Δ∗ν are the zeros of the Chebyshev polynomial of the ﬁrst kind, n is the number of nodes of interpolation. Each ﬁxed i corresponds to 2n of complex equations. We will solve the ﬁrst system in (8.51), with respect to the unknowns we will Ω1 (δν ) , Ω2 (δν ), which correspond to the main cut.For this purpose S S S ν, m = 1, n of the ﬁrst , γmν and ωmν introduce “standard” solutions Nm system in order to fulﬁll the relations S + Ωkm = Nm+i

N

s S γm+i,ν Λ1ν + ωm+i,ν Λ2ν ,

(8.52)

ν=1

where i = 0 at k = 1 and i = n, if k = 2. If we apply (8.52) in (8.51), we come to a system of equations with the second group of unknowns Λjν . In fact such an algorithm is used for the consecutive solution of two uncoupled systems (of four real integral equations). As the numerical investigations show, the indicated procedure of “decreasing of the coupling of the area” may be eﬃciently used in those cases, where there are several cuts in the region. As an example, consider a piezoceramic from P ZT − 4, which contains (1) (1) two cracks L1 and L2 of the parameterization of the formξ1 + iξ2 = (1) (1) (2) (2) (2) 1 + ip∗ δ and ξ1 + iξ2 = Δ exp iϕ(2) 1 + ip∗ Δ + δ exp iϕ ih (ϕ(j) is the angle of orientation of crack Lj in the space). For this case the number of interpolation during the solution procedure of system (8.51) was set to be equal n = 20, 25, 33, and a further increase of n does not practically improve the accuracy of the obtained results. The relative stress intensity factors are given by $ ± % Kmj =

(i) γ12 (c∗11 + c∗12 ) −iψ(i) (±1) m e Π1j (±1) − (−1) eiψ (±1) Π2j (±1) , 4γ22 Λ j sj (±1)

8.6 Eﬀect of Mutual Hardening of Cracks 2.20

355

Quasi-longitudinal wave

1.65

L2 L1 1

1.10 2

0.55

0.00 0.00

1

2

3

3

γ 2l1 0.75

1.50

2.25

3.00

+ Fig. 8.6. Behaviour of quantity < KII > in a medium with two cracks according to parameter γ2 l1 at radiation of quasilongitudinal wave

where Πm1 = Ωm , Πm2 = Λm (m, j = 1, 2). Relative stress intensity factors are functions of the normalized wave number γ2 1 (2j is the length of crack Lj ) while a quasilongitudinal wave radiates along x2 -axis is shown in Figs. 8.6 (2) & (1) and 8.7. The curves with number m are constructed for p∗ 2 = 0, p∗ /2 = (j) 0.3 (m − 1). It was assumed that h/2 = 2, ϕ = 0. The $solid %lines$ corre% + − = Kmj . spond to crack L1 , the dashed ones to L2 . It is obvious that Kmj ± Figure 8.8 show KIj 1 as a function of the orientation angle of crack (j) & L2 at γ2 1 = 1, ϕ(1) = 0, h/1 = 2, p∗ 1 = 0. Solid lines 1 and 2 are constructed for tips a1 and a2 , the dashed ones for b1 and b2 , respectively; curve 3 corresponds to the situations, where there is a single crack L2 in the medium.

0.84

+

3 0.63 2

0.42

0.21

1 2

0.00 0.00

0.75

3

1

1.50

+ KIII

γ 2l1 2.25

3.00

Fig. 8.7. Behaviour of quantity < > in a medium with two cracks according to parameter γ2 l1 at radiation of a quasilongitudinal wave

356

8 Electroacoustic Waves ±

2

Quasi-longitudinal wave

b2 ϕ

a2 a1

2

1 1

2

b1

1

3 3

ϕ(2)

0

π/2

0

Fig. 8.8. Changes of quantity < crack L2

+ Kij

π

> as a function of the orientation angle of the

From the results it follows, that during the interaction of two cracks the stress intensity factors depend considerably on the curvature of the cracks and on their relative position. In particular this is observed when monochromatic shear or expansion waves radiate on the cracks from inﬁnity. It should be mentioned that for the certain values of quantities ω and the angles of orientation of the cracks it is observed an eﬀect of their mutual hardening (Fig. 8.8).

8.7 An Inertial Eﬀect in the Process of Impact Eﬀect on a Crack Here we investigate the behavior of stress intensity factors under conditions of impulse loading of a piezoceramic medium, weakened by tunnel cracks of rather arbitrary conﬁguration. As loading we consider normal and tangential stresses acting on the edges of the crack. Based on the analysis similar to that presented in Sect. 4.6 and taking into account formula (8.45) we come to the following expressions for the stress intensity factors ± KI,II

∞ D 2 γ12 cD 11 + c12 − 2κ0 " =± Re Ω1,2 (ω, ±1)e−iωt dω. γ22 2s (±1)

(8.53)

0

Functions Ωm (ω, ±1) (m = 1, 2) are determined from system of integrodiﬀerential (8.38), (8.39), the right parts of which in the given case will be written down with respect to the spectral functions of loading. Below we give some results for the inﬂuence of an inertial eﬀect on stress intensity factors in a medium (ceramics P ZT −4) weakened by one or two cracks. For deﬁniteness, assume that the forces acting on the edges of the cracks are

8.7 An Inertial Eﬀect in the Process of Impact Eﬀect on a Crack 1.25

357

+

1 1.00

2

0.75 0.50 0.25 0.00

t*

–0.25 0.0

3.2

6.4

9.6

12.8

16.0

Fig. 8.9. Changes of < KI+ > under the impulse loading of a crack by normal forces

of impulse trapezoidal form (Fig. 4.28). The spectral function of the given impulse is determined by formula (4.73), where the quantity Rν (ω) (ν = 1, 2) is now expressed by the spectral function of loading Pν (ω) appearing in integral (8.38) or (8.49). $ % & √ Figure 8.9 show the behavior of the relative factor KI+ = KI+ σ2 π (2 is the length of the crack), as a function of the dimensionless time t∗ = c2 t−1 (c2 is the velocity of the shear wave in a piezoceramic) for the case where a parabolic crack ξ1 = pδ, ξ2 = p∗ δ 2 , δ ∈ [−1, 1] is evenly loaded by distributed normal conditions changing according to a trapezoidal impulse with parameters T ∗ =& c2 T −1 = 10, d∗1 = c2 d1 −1 = 1, d∗2 = c2 d2 −1 = p∗ /p = 0 8, σ2∗ = c2 σ2 −1 = 1N s · m2 . Curves 1 and 2 are constructed ' for √ $ +% + σ1 π under and 0.3, respectively. The behavior of quantity KII = KII the inﬂuence of analogous shear impulse is shown in Fig. 8.10. +

1.2

1.0

2 1

0.8 0.6 0.4 0.2 0.0 –0.2 0.0

Fig. 8.10. Changes of < forces

+ KII

t* 3.2

6.4

9.6

12.8

16.0

> under the impulse loading of a crack by tangential

358

8 Electroacoustic Waves

0.6 0.4 0.2 0.0 –0.2 –0.4 –0.6 –0.8

t*

–1.0 0

2

4

6

8

10

12

14

16

+ Fig. 8.11. Changes of < KII2 > during the interaction of two cracks in a medium as a result of impulse changes of tangential forces on one of the cracks

$ + % in the case of interaction Figure 8.11 shows the graph of quantity KII2 of two collinear cracks L1 and L2 of diﬀerent length with parametric equations (1) (1) (2) (2) ξ1 = 3δ, ξ2 = 0 and ξ1 = δ, ξ2 = h. It was assumed that the crack L2 is free from loading, and a trapezoidal impulse of tangential stress acts on L1 in the form of T ∗ = c2 T h−1 = 10, d∗1 = c2 d1&h−1 = 1, d∗2 = c2 d2 h−1 = 8, and h/2 = 1, t∗ = c2 th−1 , σ1∗ = c2 σ1 h−1 = 1N s · m2 . As it follows from Fig. 8.9, due to the inertial eﬀect of intensive $ % dynamic stress the intensity factor KI may exceed its static value K10 = 1 only −1 by 25% (curve 1). The fact that, in the interval 11c−1 2 < t < 14.6c2 , quantity < KI > takes negative values expresses the tendency of the crack lips to approach one another, after some time since the load stops to exist (Fig. 8.10). From the calculations it also follows that during the interaction of two cracks the inﬂuence of the inertial eﬀect on stress intensity factor is stronger than in a medium with one crack. In concluding, the quantities KI and KII were calculated with the help of formulas (8.53) taking into account (4.73), where the semidimensionless interval was substituted by the ﬁnal one, [0, ω ∗ ]; the functions Ωm (m = 1, 2) were found from system (8.38), (8.39) by the standard method, and in order to reach the satisfactory accuracy, the number of the nodes of interpolation on the crack contour did not exceed n = 33.

8.8 A Matrix of Fundamental Solutions of Two-Dimensional Equations of Electroelasticity Consider a fundamental solution for the case of a set of oscillations in a piezoceramic medium. Consider the practically important and most complex from the mathematical point of view case, where a plane deformation of the medium is carried out on the plane parallel to the direction of an electric ﬁeld of preliminarily polarization of the piezoceramics.

8.8 A Matrix of Fundamental Solutions

359

Let a piezoceramic medium be subjected to the inﬂuence of forces Xk (x1 , x3 , t) = δ (x1 , x3 ) Re Pk e−iωt (k = 1, 3), which are concentrated on line x1 = 0, −∞ < x2 < ∞, x3 = 0 and harmonically change with time, or electric charges q (x1 , x3 , t) = δ (x1 , x3 ) Re Qe−iωt , where δ (x1 , x3 ) is the Dirac δ-function. Assume, that the medium is preliminarily polarized in the direction of x3 -axis of Cartesian system of coordinates Ox1 x2 x3 . In that case a plane deformation of a piezoelectric medium occurs in x1 Ox3 . The problem under study is governed by the • equations of motion of a medium & ∂ k σik + Xi = ρ∗ ∂ 2 ui ∂ t2

(i, k = 1, 3) ;

(8.54)

• equations of electrostatics → − div D = q,

− → E = −gradφ;

(8.55)

• material equations [140] σ11 = c11 ∂ 1 u1 + c13 ∂ 3 u3 − e31 E3 ,

(8.56)

σ13 = c44 (∂ 1 u3 + ∂ 3 u1 ) − e15 E1 , σ33 = c13 ∂ 1 u1 + c33 ∂ 3 u3 − e33 E3 , D1 =11 E1 + e15 (∂ 1 u3 + ∂ 3 u1 ) , D3 =33 E3 + e31 ∂ 1 u1 + e33 ∂ 3 u3 . Here σik , ui , Ei , Di and φ are the mechanical stresses, displacements, strength, induction and potential of the electric ﬁeld; cij = cE ij is the elasticity modulus; jj =εjj - is the dielectric permeability; ekj is the piezoelectric modulus; ρ∗ is the material density. Assuming further, σjk = Re Tjk e−iωt , φ = Re Φe−iωt , uj = Re Uj e−iωt , we can write the system (8.54)–(8.56) in matrix form, with respect to the amplitude values of displacements or electric potentials ( (( ( ( ( ( L11 L12 L13 ( ( U1(1) U1(2) U1(3) ( ( −P1 δ 0 0( ( ( ( (1) (2) (3) ( ( ( ( L21 L22 L23 ( ( U U U ( ( 0 −P3 δ 0 ( ( (( 3 (. 3 3 ( =( ( L31 L32 L33 ( ( Φ(1) Φ(2) Φ(3) ( ( 0 0 Qδ ( ( (( ( ( ( ( (( ( ( (

(8.57)

(k)

Here the upper index k = 1, 2, 3 indicates the relation of quantity Uj and Φ(k) with respect to the concentrated loadings X1 , X3 and q,and the

360

8 Electroacoustic Waves

diﬀerential operators Lij are determined as follows L11 = c11 ∂ 21 + c44 ∂ 23 + ρ∗ ω 2 , L13 = (e31 + e15 ) ∂ 1 ∂ 3 , L23 =

e15 ∂ 21

+

e33 ∂ 23 ,

L12 = (c13 + c44 ) ∂ 1 ∂ 3 , L22 =

c44 ∂ 21

L33 =

−ε11 ∂ 21

+

c33 ∂ 23

(8.58) 2

+ ρ∗ ω ,

− ε33 ∂ 23 .

Applying a two-dimensional Fourier transform to the system (8.57) [165] over x1 and x3 coordinates 1 (k) (k) Uj (x, ω) ei(ξ,x) dx, x = (x1 , x3 ) , (8.59) Vj (ξ, ω) = 2π 1 (k) (k) Uj (x, ω) = ξ = (ξ1 , ξ3 ) . Vj (ξ, ω) e−i(ξ,x) dξ, 2π we get (k)

Vj

(k)

=

k, j = 1, 3 ,

εk Rk Δj (ξ, ω) 2πΔ (ξ, ω)

R1 = P1 ,

R2 = P3 ,

R3 = Q,

(8.60) ε3 = 1.

ε1 = ε2 = −1,

(k)

Here the functions Vj (j = 1, 2, 3) represent the transformations of the amplitude of the displacement U1 , U3 and electric potential Φ, respectively. Taking into account the transformation of the coordinates ξ1 = ρ cos α, ξ3 = ρ sin α,

x1 = r cos β, x3 = r sin β,

(8.61)

the quantities entering (8.60) may be represented in the form (k)

(k)

(k)

Δj (ρ, α, ω) = bj ρ4 + cj γ 2 ρ2 + δj3 δk3 γ 4 c244 , (8.62) 2 2 3 2 2 2 2 2 Δ (ρ, α, ω) = c44 A (α) ρ ρ − γ ρ1 ρ − γ ρ2 , 2 2 2 A (α) = c−3 44 a11 a22 a33 + 2a12 a13 a23 − a11 a23 − a22 a13 − a33 a12 , & A1 (α) = a11 a33 + a22 a33 − a223 − a213 c244 , A2 (α) = a33 /c44 , a11 = −c11 n21 − c44 n23 ,

a13 = − (e31 + e15 ) n1 n3 ,

a12 = − (c13 + c44 ) n1 n3 , a23 =

−e15 n21

−

e33 n23 ,

(1)

b1 = a22 a33 − a223 , (1)

b3 = a12 a23 − a13 a22 , (2)

b3 = a12 a13 − a11 a23 ,

a22 = −c44 n21 − c33 n23 ,

a33 =11 n21 + 33 n23 , (1) b2 = a13 a23 − a12 a33 , (2) b2 = a11 a33 − a213 , (3) b3 = a11 a22 − a212 ,

n1 = cos α, n3 = sin α,

(1)

c1 = c44 a33 ,

8.8 A Matrix of Fundamental Solutions (1)

c3 = −c44 a13 ,

(1)

c2 = 0,

(3)

c3 = c44 (a11 + a22 ) ,

(2)

(2)

c2 = c44 a33 , (j)

(k)

361

c3 = −c44 a23 , (j)

(k)

ck = c j , bk = bj , ) ω Ai (α) c44 , γ= , c= , Bi (α) = A (α) c ρ∗ ) B1 B12 ν + (−1) − B2 . ρ2ν (α) = − 2 4 i is the Kronecker symbol, the quantity ρ2ν (a) > 0 (ν = 1, 2). Here δm Taking into account (8.62) and decomposing expression (8.60) into partial fractions we obtain # 2 (k)

λνj εk Rk (k) 3 3 λ0 Vj = + δj δk 2 j, k = 1, 3 , (8.63) 3 2 2 2 2πc44 A (α) ν=1 ρ − γ ρν ρ & (k) (k) ρ2ν bj + cj + δj3 δk3 c244 ρ2ν c244 (k) λνj = , λ = . 0 ν (−1) (ρ22 − ρ21 ) ρ21 ρ22

Applying the inverse Fourier transform we ﬁnd (k) Wj

(k)

W1

(k)

= U1 ,

π ∞ # 2

(k)

λνj ρ cos [rρ cos (α − β)] A (α) (ρ2 − γ 2 ρ2ν ) ν=1 0 0 δj3 δk3 λ0 cos [rρ cos (α − β)] + dρdα, A (α) ρ (k) (k) (k) k = 1, 3 . W2 = U3 , W3 = Φ(k)

εk Rk (r, β, ω) = 2 3 2π c44

(8.64)

The improper integral in (8.64) according to the principle of limiting absorption [46] should be used in the following form [43, 57] ∞

∞ 1 −iab x cos axdx x cos axdx = E1 (−iab) − eiab Ei (−iab) , = im e x2 − b2 − i0 ε→+0 x2 + b2∗ 2 0 0 " 2 b∗ = −i b + iε, ε > 0, a > 0, Reb∗ > 0, where E1 (z) , Ei (z) are the integral exponential functions [22, 109]. Taking into account this observation, and the values of integral [57] (C = 0.5772 . . . .. is the Euler’s constant) ∞ 0

cos axdx = −na − C x

(a > 0) ,

362

8 Electroacoustic Waves

we obtain the formulas for the determination of the amplitude of displacements and electric potentials (k) Wj

εk Rk (r, β, ω) = 2π 2 c344

π # 2 0

ν=1

(k) λνj Ψ (θν )

+

δj3 δk3 λ0 Ω (θ)

dα , A (α)

(8.65)

πi Ψ (x) = eix − cos xcix − sin xsix, Ω (x) = −nx − C, 2 θν = γρν r |cos (α − β)| , θ = r |cos (α − β)| j, k = 1, 3 . here six, cix are the corresponding integral sine and cosine [109]. Thus, the matrix of fundamental solutions is determined in a closed form over formula (8.65). The analogous result will be obtained in [39]. Here it should be mentioned that from the analysis of the homogeneous system of diﬀerential (8.57) it follows, that in the given case of a piezoceramic medium there may exist plane monochromatic waves of two types: quasilongitudinal and quasitransverse ones. The velocity of these waves depends on the direction, in which their propagation takes place. The amplitudes of displacements and electric potentials that refer to the waves with wave number γ are determined by expression 0 = τj exp [−iγν (ϕ) (x1 cos ϑ + x3 sin ϕ)] Wjν

(ν = 1, 2; j = 1, 2, 3) , γν (ϕ) =

ω , cν (ϕ)

√ c44 cν (ϕ) = √ . ρν (ϕ) ρ∗

(8.66)

Here ϕ is the angle between the normal to the front waves and x1 -axis; the 0 in each functions ρν (ϕ) are deﬁned in (8.62). The amplitude of potential W3ν of the electroacoustic waves is connected with the amplitude of displacements 0 0 W1ν and W2ν , by the relation 0.5τ1 (e15 + e31 ) sin 2φ + τ2 e15 cos2 ϕ + e33 sin2 ϕ τ3 = . 11 cos2 ϕ+ 33 sin2 ϕ

(8.67)

Figures 8.12 and 8.13, illustrate the behavior of the electric ﬁelds in the transversal-isotropic with respect to elastic and electric properties of a piezo(3) (1) ceramic medium on the line of peak values of displacements U3 and U3 under the inﬂuence of electric charges q and force X1 in the centre of the considered area. Figure 8.14 shows the equipotentials for the case where an electric charge is the source of oscillations. The curves of the equal modu(1) lus of the amplitude of displacements U1 under the inﬂuence of force X1 are shown in Fig. 8.15. In the calculations of the physicalquantities with

8.8 A Matrix of Fundamental Solutions

363

(3)

under

(1)

under

Fig. 8.12. The contour lines of the modulus of displacement amplitude U3 the inﬂuence of an electric charge

Fig. 8.13. The contour lines of the modulus of displacement amplitude U3 the inﬂuence of force X1

364

8 Electroacoustic Waves

Fig. 8.14. The contour lines of the modulus of the electric potential amplitude under the inﬂuence of an electric charge

(1)

Fig. 8.15. The contour lines of the modulus of displacement amplitude U1 the inﬂuence of force X1

under

8.9 An Unbounded Medium with Tunnel Openings

365

respect to formula (8.65) it is recommended to use the quadrature formulas of trapezoids [137] 1 π

π f (θ)n |cos θ| dθ ≈ −

2N 1 f (θk )SkN , 2N k=1

0

SkN = n2 +

N −1

m=1

m

(−1) cos 2mθk , m

θk =

(2k − 1) π . 4N

8.9 An Unbounded Medium with Tunnel Openings In the Cartesian system of coordinates x1 , x2 , x3 let us assume a piezoceramic medium weakened by tunnel openings along-x2 axis, the cross-section of which are bounded by contours Γm (m = 1, 2, . . . , n). Assume that the x3 -axis coincides with the direction of force lines of the electric ﬁeld of the preliminarily polarization of the ceramics. On the surface of the cavities may act, stresses Xm (x1 , x3 , t) = Re Pm (x1 , x3 ) e−iωt (m = 1, 3) harmonically changing with time and may radiate plane monochromatic waves of the corresponding types may occur from inﬁnity. Assumed that the curvatures of contours Γm and of functions Pm satisfy H¨ older condition on Γ = ∪Γm and, besides, ∩Γm = Ø. In the stated problem, the medium with cavities is in state of plane deformation in x1 Ox3 . The full system of equations has the form of (8.54)–(8.56). It is necessary to add mechanical and electric boundary conditions on the surface of the cavities. Considering that the surface of the cavities are bounded with vacuum (air) we set Dn = D1 cos ψ + D3 sin ψ = 0

on Γm .

(8.68)

here ψ denotes the angle between the normal to contour Γm and axis Ox1 . Using the matrix of fundamental solutions (8.65) we write down the integral representations of the amplitude of displacements and electric potentials, corresponding to the dispersed by cavities electroelastic ﬁeld, in the form [212, 215] 3

pk (ζ) gkj (ζ, z) ds, Wj (z) = k=1 Γ

εk gkj (ζ, z) = 2 3 2π c44

π # 2 0

ν=1

θν∗ = γρν r∗ |cos (α − β ∗ )| , ∗

r = |ζ − z| ,

∗

(k) λνj Ψ (θν∗ )

+ δj3 δk3 λ0 Ω (θ∗ )

dα , A (α)

θ∗ = r∗ |cos (α − β ∗ )| ,

β = arg (ζ − z) ,

z = x1 + ix3 ,

ζ ∈ Γ.

(8.69)

366

8 Electroacoustic Waves

Here pk (ζ) are the unknown “densities” to be determined; ds is the element of the length of contour arc Γ. Integral representations (8.69) have the necessary completeness with respect to the considered boundary problem. By diﬀerentiating functions (8.69) we ﬁnd ∂ Wj (z) =

3

( )

pk (ζ) Gkj (ζ, z) ds

k=1 Γ ( ) Gkj

(θν∗ )

π # 2 0

ν=1

(8.70)

(k) λνj Ψ( )

(θν∗ )

+

δj3 δk3 λ0 Ω( ) (θ∗ )

dα , A (α)

= −γρν n H − β∗) , n

, Ω( ) (θ∗ ) = − ∗ r cos (α − β ∗ ) π 1 H (x) = eix + + cos xsix − sin xcix. 2 x Ψ

( )

εk (ζ, z) = 2 3 2π c44

( = 1, 3) ,

(θν∗ ) sign cos (α

Using functions (8.70) and material (8.56) we may determine the ﬁeld quantities at any point of the area z ∈ Γ. In the case where z → ζ0 ∈ Γ, when calculating ∂ Wj (z) it is required to take into account the integrated terms ( ) appearing due to the singular character of kernel Gkj (ζ, z) at the point z = ζ. Here we may show that the singular summands appearing in the functions ( ) Gkj (ζ, z) conform to the static case (ω = 0). In reality, due to (8.60), (8.62), 2 * (k) (k) λνj = bj − δj3 δk3 λ0 we have (8.63) and relations ν=1

(k) Vj

−

(k) Vj0

(k) (k) Δj (ξ, ω) Δj (ξ, 0) − = Δ (ξ, ω) Δ (ξ, 0) 2

1 εk Rk 1 (k) = λ − . 2πc344 A (α) ν=1 νj ρ2 − γ 2 ρ2ν ρ2 εk Rk = 2π

#

(8.71)

We may transform (8.71) with the help of (8.59) and calculating the corresponding derivatives, we will obtain ∂

(k) Wj

−

(k) Wj0

2 εk Rk dα (k) ( ) = , λνj Ψ∗ (θν ) 3 2 2π c44 ν=1 A (α) π

(8.72)

0

( ) Ψ∗ (θν )

= −γρν n h (θν ) sign cos (α − β) ,

h (x) = H (x) −

1 . x

Hence, function (8.72) at z = ζ is reduced to zero, i.e. is regular. The bulky procedure of the analytical calculation of the integrals corresponding to the statistic parts of thederivatives from fundamental

8.9 An Unbounded Medium with Tunnel Openings

367

solution (8.65) gives: (k) ∂ Wj0

εk Rk =− 2 3 2π c44 r

π

(k) (k) 3

bj n dα ωkν m ν Aνj = Rk Re , A (α) cos (α − β) zν − zν0 ν=1

0

(8.73)

2 (1) Aν1 = − c44 + c33 μ2ν 11 + 33 μ2ν − e15 + e33 μ2ν , (1) Aν2 = μν (c44 + c13 ) 11 + 33 μ2ν + (e15 + e31 ) e15 + e33 μ2ν , (1) Aν3 = μν (c44 + c13 ) e15 + e33 μ2ν − (e15 + e31 ) c44 + c33 μ2ν , (2) 2 Aν2 = − c11 + c44 μ2ν 11 + 33 μ2ν − μ2ν (e15 + e31 ) , (2) Aν3 = μ2ν (e15 + e31 ) (c44 + c13 ) − e15 + e33 μ2ν c11 + c44 μ2ν , (3) (k) (i) Aν3 = c11 + c44 μ2ν c44 + c33 μ2ν − μ2ν (c31 + c44 )2 , Aνi = Aνk , m1ν = 1,

m3ν = μν ,

zν = x1 + μν x3 ,

zν0 = x10 + μν x30 ,

where μν (Im μν > 0, ν = 1, 2, 3) are the roots of algebraic equation aμ6 + bμ4 + cμ2 + d = 0, 2 , a = −c44 c33 33 1 + k33 b = c44 (2c13 33 − c3311

(8.74) 2 k33 =

e233

e215

2 , k15 = , c33 33 c44 11 2 − + 2e31 e33 ) − c11 c3333 1 + k33

2

− c33 (e15 + e31 ) + 2e33 c13 (e15 + e31 ) + c213 33 , c = c44 2c13 11 − e231 + 2c13 e15 (e15 + e31 ) + c213 11 − − c11 (c44 33 + c33 11 + 2e15 e33 ) , 2 , d = −c11 c44 11 1 + k15 and the constants ωkν are determined from three material systems of linear algebraic equations Im

3

(k)

(k)

dνj ωkν = fj

ν=1 (k) dν1 = −γν(k) μν ,

(k)

j = 1, 6; k = 1, 3 , (k)

dν2 = γν(k) , dν3 = −rν(k) , (k) (k) fi+3 = 0 fi i = 1, 3 , (k) (k) (k) γν(k) = c13 Aν1 + c33 Aν2 + e33 Aν3 μν , (k) (k) (k) rν(k) = 33 Aν3 − e33 Aν2 μν − e31 Aν1 . ' = δik 2π,

(k)

(k)

dν,i+3 = −Aνi ,

(8.75)

368

8 Electroacoustic Waves

Thus, integral representations (8.70) taking into account (8.72), (8.73) may be written in the form ∂ Wj (z) =

3

k=1 Γ

( ) Fkj

(ζ, z) = Re

( )

pk (ζ)Fkj (ζ, z) ds

(k) 3

ωkν m ν Aνj

zν − ζν

ν=1

( = 1, 3) ,

2 εk dα (k) ( ) . (8.76) + 2 3 λνj Ψ∗ (θν∗ ) 2π c44 ν=1 A (α) π

0

Substituting the limiting values of derivatives (8.76) at z → ζ0 ∈ Γ into mechanical and electric boundary conditions, we come to a system of three singular integral equations of the second kind with respect to functions pk (ζ) 3

1 p (ζ0 ) + 2

pk (ζ)M k (ζ, ζ0 ) ds = N (ζ0 )

= 1, 3 ,

k=1 Γ

(k) T11 n∗1

(k)

(k)

(k)

+ T13 n∗3 , M2k = T13 n∗1 + T33 n∗3 , M1k =

(1) (3) (1) (1) (3) (3) M3k = e15 F0k2 + F0k1 − 11 F0k3 n∗1 + e31 F0k1 + e33 F0k2 − 33 F0k3 n∗3 , (k)

(1)

(3)

(3)

(k)

(1)

(3)

(3)

T11 = c11 F0k1 + c13 F0k2 + e31 F0k3 , (k) (1) (3) (1) T13 = c44 F0k2 + F0k1 + e15 F0k3 , T33 = c13 F0k1 + c33 F0k2 + e33 F0k3 , ( )

( )

F0kj = Fkj (ζ, ζ0 ) , (0)

N (ζ0 ) = N

(0) N1

(ζ0 ) +

(ζ0 ) = P1 ,

2

j=1

(j)

N (ζ0 ) ,

(0) N2

(0)

(ζ0 ) = P3 , N3 (ζ0 ) = 0, π π e31 e33 (1) n∗1 e−iγ1 ( 2 )Imζ0 , N1 (ζ0 ) = c13 1 + τ2 iγ1 33 c13 2 π (1) 2 ∗ −iγ1 ( π 2 )Imζ0 , n3 e N2 (ζ0 ) = c33 1 + k33 τ2 iγ1 2 (2) 2 τ2 iγ2 (0) n∗3 e−iγ2 (0)Reζ0 , N1 (ζ0 ) = c44 1 + k15 (2) 2 τ2 iγ2 (0) n∗1 e−iγ2 (0)Reζ0 , N2 (ζ0 ) = c44 1 + k15 (j)

N3 (ζ0 ) = 0, ψ0 = ψ (ζ0 ) ;

n∗1 = cos ψ0 ,

n∗3 = sin ψ0 , ζ, ζ0 ∈ Γ = ∪Γm m = 1, n; j = 1, 2 . (8.77) (j)

The right parts of (8.77) N (ζ0 ) were found by taking into account expressions (8.66), (8.67); they correspond to two types of loadings: a plane

8.9 An Unbounded Medium with Tunnel Openings

369

quasilongitudinal wave, propagating in the negative direction of x3 (j = 1) axis, and a plane quasitransversal wave radiating in the negative direction of x1 (j = 2) -axis. The third integral equation ( = 3) in the system (8.77) refers to the electric boundary condition (8.68). To determine the dynamic stress concentration in the medium with openings we should calculate the normal stress σϑ on the contour Γ. Due to the integral representations (8.76) we have σϑ = Re Tϑ e−iωt , ⎧ ⎫ 3 ⎨ ⎬

(k) Tϑ (ζ0 ) = T0 + pk (ζ0 ) tk (ζ0 ) + pk (ζ) Tϑ (ζ, ζ0 ) ds , ⎩ ⎭ k=1

tk (ζ0 ) = −πIm (k)

Γ

3 2

(μν n∗ + n∗ ) 3

ν=1 (k) ∗ 2 T11 (n3 ) +

1

μν n∗1 − n∗3 (k)

2

ωkν γν(k) ,

(8.78)

(k)

T33 (n∗1 ) − 2T13 n∗1 n∗3 , π ∗ 2 e e 31 33 2 −iγ1 ( π Imζ ∗ 2 ) 0 2 T0 = −iγ1 τ2 e c13 + (n3 ) + c33 1 + k33 (n1 ) + 2 33 ∗ ∗ −iγ2 (0)Reζ0 2 + 2iγ2 (0) τ2 c44 1 + k15 n1 n3 e .

Tϑ

=

(k)

The quantities Tij are deﬁned in (8.77). Let us investigating the stress concentration in a space (ceramics P ZT −4) weakened by tunnel openings of “elliptic” or “square” type with parametric equations, respectively, Reζ = R1 cos η,

Imζ = R2 sin η,

Reζ = a (cos η + C cos 3η) , Imζ = a (sin η − C sin 3η) ,

η ∈ [0, 2π] ,

(8.79)

C = 0.14036. Taking into account (8.79) the functions pk (ζ) k = 1, 3 were calculated from (8.77) by the method of quadratures (See: Appendix 12.8, Par. B.2). By formula (8.78) we calculate stress Tϑ (ζ0 ). The complex roots of (8.74) corresponding to ceramics P ZT − 4, are: μ1 = 1.203802i, μ2,3 = ±0.200427 + 1.069137i. Figure 8.16 illustrates the behavior of the modulus of the amplitude of relative stress χ = |Tϑ /Λ| at point η = π of the contour of an elliptic cavity in functions of normalized wave number γR under the inﬂuence of quasilongitudinal wave (R = 0.5 (R1 + R2 )). Curves 1 and 2 are constructed for values R1 /R2 = 2 and 1, respectively. The dashed lines correspond to the values of piezoelectric constants e33 = e13 = 0, e15 = 0.1ca/m2 , which corresponds to the “piezopassive” material (at all eij = 0 system (8.75) becomes conﬂuent). The changes of quantity χ on the contour of the square opening during the radiation of quasilongitudinal and quasitransversal waves is shown in Figs. 8.17 and 8.18, respectively. The curve with number m corresponds to the

370

8 Electroacoustic Waves χ

5.1

1

3.0

1

2

2

0.9 0.0

γR

2.5

5.0

Fig. 8.16. Changes of quantity L at point η = π of the contour of an elliptic cavity in function of γR under the inﬂuence of a quasilongitudinal wave 6

χ

1 2 3

3 0 0.5π

η π

1.5π

Fig. 8.17. Changes of quantity χ on the contour of a square opening at radiation of a quasilongitudinal wave

value of the normalized wave number γa = m. The graphs in Fig. 8.19 (for the same values γa) refer to the case of loading of the cavity by uniform pulsat∗ ∗ ing "of amplitude Λ = P (P1 = P n1 , P3 = P n3 ). The quantity Λ = 0 pressure T = τ2 γ c44 c33 (1 + k 2 ) represents the modulus of the amplitude of stress 33 33 " 0 = τ2 γc44 1 + k 2 σ33 in the radiating quasilongitudinal wave, and Λ = T13 15 is the modulus of the amplitude of stress σ13 in the radiating quasitransversal wave. From calculations it follows that under the dynamic excitation a redistribution of stress σϑ takes place on the surface of the cavity. The inﬂuence of the inertial eﬀect is manifested by the increase of the stress concentration at the cavity (for a range of changes of frequency ω) in comparison with the corresponding static case (ω = 0). The eﬀect of connection of the coupled ﬁelds, as it seen in Fig. 8.16, may inﬂuence the stress concentration considerably, what is also observed in the case of the deformation of a piezoceramic

8.10 Oscillation of a Cylinder 6

371

χ

1 3 2

3

η 0

π

π/2

0

Fig. 8.18. Changes of quantity χ on the contour of a square opening at radiation of a quasitransverse wave 6

χ

3

3

2 1

η

0

0

π/2

π

Fig. 8.19. Changes of χ on the contour of a square opening under the inﬂuence of normal pressure

medium with defects in the cavity perpendicular to the direction of the preliminary polarization of ceramics [145].

8.10 Oscillation of a Cylinder Under the Inﬂuence of Pulsating Pressure The integral (8.77) may be used for investigating two-dimensional electroelastic ﬁelds in a continuous along x2 -axis cylinder, excited by pulsating pressure of amplitude P (the outer medium is air). For this in system (8.77) before the integrated summands we should switched the signs, and its right part should be set as N1 (ζ0 ) = −P n∗1 , N2 (ζ0 ) = −P n∗3 , N3 (ζ0 ) = 0.

372

8 Electroacoustic Waves 5

χ

4

3

2

1

0 0.0

1.6

3.2

4.8

6.4 γ a 8.0

Fig. 8.20. Changes of χ = |Tθ /N∗ | at points η = π and η = 9 π/19 of the contour of a cylinder as a function of normalized wave number γα

8

χ 3

4 1 2 4 0

η

π/4

0

Fig. 8.21. Distribution of quantity χ on the contour of a cylinder for various parameter values of γα

To determine stresses σϑ on the boundary of the cylinder we use (8.78), where we should set tk (ζ0 ) = π Im

3 2

(μν n∗ + n∗ ) 3

ν=1

1

μν n∗1 − n∗3

ωkν γν(k) .

As an example consider a circular cylinder (material - P ZT − 4). Figure 8.20 illustrates the changes of χ = |Tϑ /N ∗ |, at points η = π and η = 9π/19 (dashed line) of the contour of the cylinder as a function of the normalized wave number γa (η is the polar angle, a is the cylinder radius). The distribution of quantity χ on the cylinder contour is shown in Fig. 8.21. Curves 1–4, corresponding to the distribution of stress σϑ on the surface of the cylinder, are constructed for values γa = 2.84, 4, 5.07 and 6, respectively.

9 Fundamentals of Magnetoelasticity

9.1 Magnetic Field and its Properties Any current (moving charged particles) is characterized by its ability to interact with other currents by means of forces, which are called magnetic forces. In this case we have to do with ﬁeld interaction: the moving electric charge, besides the electric ﬁeld is characterized by a magnetic ﬁeld that acts on the moving charged particles or the bodies. The so-called induction of magnetic ﬁeld is the fundamental power feature of the magnetic ﬁeld. The role of the electrical point charge in the study of magnetic ﬁeld plays a small, with respect to size, loop with the current and the direction of the magnetic force on the given point of ﬁeld coincides with → the direction of the vector of the magnetic moment of loop − p m . However, it is necessary still to know additionally the module of this force. Here we have at our disposal the experimental law of Ampere, which connects the module of the force, which acts on a small, with respect to length, rectilinear portion with current, placed into the magnetic ﬁeld with module of the induction vector of the magnetic ﬁeld ΔF = kIΔlB sin α, where Δl us the length of the small rectilinear portion of the conductor, along which the current I ﬂows; k is the coeﬃcient of proportionality, that depends on the selection of system of units; B is the module of the vector of the magnetic ﬁeld in the place of the conductor; α is the angle between the → − direction of conductor and the direction of vector B . If the magnitudes ΔF, Δl, I, B are measured by the units of a system, then k = 1 and, further, if α = π2 , then sin α = 1 and ΔF (9.1) IΔl In this way, the induction of the magnetic ﬁeld is a physical magnitude, the module of which is determined by the ratio of the module ΔF of force, which B=

374

9 Magnetoelasticity

acts on the given place of the magnetic ﬁeld, by the conductor of length Δl, the force of the current on which equals I, to the magnitudes Δl and I when → − the orientation of the conductor it perpendicular to the direction of vector B . In accordance with (9.1), the unit of measurement of the magnetic induction in the system SI is established. When ΔF = 1N, Δl = 1m, I = 1A we get: N 1N =1 = 1T. (T − tesla). B= 1A · 1m A·m Consequently, 1 Tesla is the induction of this uniform (identical in all points) magnetic ﬁeld, in which to every meter of length of the conductor with → − current in 1A, located perpendicularly to the direction of the ﬁeld B , acts a force in 1N (this is a high value). In CGS magnetic induction is measured in Gausses. → − An auxiliary vector H , called intensity of the magnetic ﬁeld, is usually → − introduced together with the vector of induction B . The intensity of the magnetic ﬁeld is deﬁned as the ratio of the induction of ﬁeld in the vacuum → − B to the magnetic constant μ0 : → − → − B0 , H0 = μ0 1 Wb ; −7 N or where μ0 = = 4π · 10 A·m A2 0 c2 C2 1 = 8, 85 · 10−12 ; 4πk N m2 the coeﬃcient of proportionality k is numerically equal to the force, with which the two unit charges interact on the unit distance; c = 3 · 108 m/s is the velocity of light in the vacuum. The unit of measurement of the intensity of the magnetic ﬁeld in the system SI is 1A/m (the intensity of the magnetic ﬁeld in the center of the circular frame with radius 1m, along which current 2A ﬂows). In the CGS A . system Oersted is used: 1Oe ≈ 80 m → − Note: By analogy with the study of the electrical ﬁeld, where vector E is → − called intensity of the electrical ﬁeld, and auxiliary vector D, which is called − → − → electrical displacement D = ε0 E , in the theory of magnetism we had to → − call vector B intensity of the magnetic ﬁeld and auxiliary vector, magnetic induction or magnetic displacement. The confusion in terminology appeared → − → − when the physical sense of the vectors of the ﬁeld B and H was still not suﬃciently clear. 0 is the electric constant 0 =

9.1.1 Action of the Magnetic Field on the Moving Electric Charges The moving electric charges are characterized not only by the fact that in their surrounding space magnetic ﬁelds are revealed, but also by the fact that

9.2 The Magnetic Properties of the Substance

375

the charges themselves are subject to the inﬂuence of external magnetic ﬁelds. The force, which acts on the moving charged particle, can be determined by means of the Ampere law; this force is called Lorentz force and its modulus is given by: FL = qνB sin α where q is the charge of the particle; ν is the module of the average speed of → the ordered movement of the particle; α is the angle between the vector − ν of the speed of the charged particle and the induction vector of the magnetic → − ﬁeld B .

9.2 The Magnetic Properties of the Substance It is shown in physics that the motion of electrons around the atomic nucleus is equivalent to micro-currents, which take place on closed loops. The → vector of magnetic moment − p m connects the loop with the current. Thus, inside every substance, which consists of atoms, molecules and ions, there are many microscopic loops that act as currents, each of which is characterized by its magnetic ﬁeld. The hypothesis that was once stated by Ampere about the presence of molecular currents inside the substance was turned out very fruitful, except that here we have not molecular, but electronic currents. A question arises: why many substances under normal conditions do not possess magnetic properties manifesting themselves in their surrounding space? This is explained by the fact that even in a very small volume of substance the number of electron orbits is enormous. For example, in 1 cm3 copperplate ≈ 2, 43 · 1024 electron orbits are counted. All these orbits are oriented in the space in diﬀerent ways, and their magnetic moments can be compensated. Therefore, a piece of copper, under normal conditions, does not manifest itself magnetic properties, but they are inherent to every atom of it. 9.2.1 Action of External Magnetic Field on the Substance The external magnetic ﬁeld, into which a substance is introduced, aﬀects the electrons of the substance and in this way changes its internal magnetic ﬁeld. Indeed, every electron orbit is similar to a loop with current, and this loop in an external magnetic ﬁeld is oriented in a speciﬁc manner. In this way, the action of an external magnetic ﬁeld on the substance reorients the electron orbits (or the vectors of the magnetic moments). This reorientation ensures a magnetic ﬁeld inside the substance, diﬀerent from that, which was in it before the introduction into the external ﬁeld.The resulting magnetic

376

9 Magnetoelasticity

ﬁeld within the limits of the capacity of the substance would be the result of the imposition of two magnetic ﬁelds – one external and one internal, induced in the substance by the action of the external ﬁeld. The result of this imposition, as we will see below, can be diﬀerent: the induction of the resulting magnetic ﬁeld can be both less and more than the induction of the external ﬁeld. The dimensionless magnitude μ, which characterizes the degree of participation of the substance in the change of the resulting magnetic ﬁeld, is called relative magnetic permeability of the substance: − → → − B = μB 0

(9.2)

where B, B0 are the values of the induction of the magnetic ﬁeld of one and the same sources in the substance and the vacuum, respectively. It is possible → − → − to show that B = μμ0 H . The magnitude, which characterizes the degree of magnetization of the substance in the magnetic ﬁeld is also introduced, that is the magnetization vector or magnetization. Magnetization vector is called the magnetic moment of the volume unit of the magnetized substance, that is the sum vector of the magnetic moments of all atoms included in the volume unit of the magnetized substance: n − → − (→ p ) . M= k=1

m k

Dimension: [M] = A/M = [H]. 9.2.2 Classification of Substances According to Magnetic Properties All substances in nature can be considered as magnetic materials. The following kinds of magnetic materials distinguished together with their corresponding magnetic phenomena: diamagnetic (diamagnetism), paramagnetic (paramagnetism), ferromagnetic (ferro-magnetism), antiferromagnetic (antiferromagnetism), ferrimagnetic (ferrimagnetism); diamagnetic and paramagnetic materials are classiﬁed under weak magnetic materials and all the rest, under the strong ones. Diamagnetism Under diamagnetic are classiﬁed all inert gases, hydrogen, nitrogen, chlorine, ammonia, metals (zinc, gold, mercury), nonmetals (phosphorus, silicon, sulfur), tree, marble, glass, wax, water, petroleum and others. Outwardly, diamagnetism manifests itself by the fact that the diamagnetic materials are ejected out of the magnetic ﬁeld.

9.2 The Magnetic Properties of the Substance

377

The diamagnetic materials are characterized by the fact that the sum orbital magnetic moment of all electrons of every atom is equal to zero. This means that the atom of a diamagnetic material in absence of an external magnetic ﬁeld does not manifest itself any magnetic properties. The action of an external magnetic ﬁeld on the atom of a diamagnetic material leads to magnetic moment in it, directed always against the induction of the external magnetic ﬁeld. This is connected with the fact that the electrons in the external magnetic ﬁeld experience the action of Lorentz forces. In this case, the frequency of revolution of the electrons around the orbits changes, and the orbits themselves can change their orientation. This means that a magnetic ﬁeld appears inside the diamagnetic material, the induction vector of which is directed in the opposite way to the induction vector of the of external ﬁeld. Within the limits of the diamagnetic material, the external ﬁeld is weakened. Therefore, from (9.2) for the diamagnetic material μ < 1. For a diamagnetic material, the magnetization vector is proportional to the intensity of the magnetizing ﬁeld: − → → − M = χH (9.3) where the coeﬃcient of proportionality χ is called the magnetic susceptibility of the substance; this is a dimensionless magnitude. It is obvious that for a diamagnetic material χ < 0. The magnetic susceptibilities of diﬀerent substances in one and the same state of aggregation have little diﬀerence: for the gases χ ≈ 10−9 , for the liquids χ ≈ 10−6 , for the solid bodies χ ≈ 10−5 . It can be shown that μ = 1 + χ. For a diamagnetic material, μ and χ are constants. Paramagnetism The considered mechanism of magnetization of diamagnetic materials is reduced to the induction of supplementary magnetic moment in the atom under the action of an external magnetic ﬁeld. This phenomenon is characteristic for atoms of any substance and, therefore, all substances must possess diamagnetic properties. Question: hence these paramagnetic properties? The atoms of paramagnetic materials even in absence of external magnetic ﬁeld possess some magnetic moment, diﬀerent from zero; however, because of their chaotic directivity in the macroscopic volume of the para-magnetic material magnetic properties do not appear. When a paramagnetic material is introduced into an external magnetic ﬁeld an internal magnetic ﬁeld, the induction vector of which coincides in direction with the induction vector of the external ﬁeld. There is also a diamagnetic eﬀect, but it is weaker than the paramagnetic one. For paramagnetic materials, μ > 1. For gases (oxygen, nitrogen oxide), χ ≈ 10−7 , for solid bodies (platinum, sodium, lithium), χ ≈ 10−4 , for other materials, it is considerably less, i.e. μ ≈ 1.

378

9 Magnetoelasticity

Thus, the magnetic susceptibility of paramagnetic materials is approximately 100 times more than in diamagnetic ones. Therefore, the strong paramagnetic eﬀect overlaps the weaker diamagnetic one. Formulas (9.2), (9.3), where χ and μ are constants, also hold. Ferromagnetism Under the class of ferromagnetic materials fall iron, nickel, cobalt, their compounds and alloys, as well as some alloys of manganese, silver, aluminum, and others. Under relatively low temperatures, ferromagnetic materials are some rare-earth elements. All ferromagnetic materials are characterized by: 1. Crystalline structure; 2. High positive value μ >> 1; 3. Essential and nonlinear dependence of μ and χ on the intensity of ﬁeld and temperature; 4. Ability to be magnetized to saturation under usual temperatures even in weak ﬁelds; 5. Hysteresis, i.e. dependence of magnetic properties on the previous magnetic state (“magnetic prehistory”); 6. The Curie point, i.e., by a temperature, beyond which the material looses its ferromagnetic properties. In contrast to diamagnetic and paramagnetic mate-rials, for which the magnetization vector is proportional to the intensity of the magnetizing ﬁeld, in ferromagnetic materials its magnitude is fairly complicated nonlinear function of intensity. For nickel Fig. 9.1 is valid: For convenience in the representation, the scale is disrupted: the domain of the ﬁeld intensity in the section 0, 1 · 103 . . . 2 · 103 A/m is extended. It is

M

χ

M

105 A M

χ

0,5 1

2

10

20

H, 103 A

M

Fig. 9.1. Diagram of the dependence of magnetization and magnetic susceptibility on the intensity of the magnetic field

9.2 The Magnetic Properties of the Substance

379

clear from the diagram that magnetization of nickel increases rapidly in the beginning with growth rate H. Then it reaches magnetic saturation, when magnetization practically ceases to depend on the magnitude of the mag− → → − → − → − netizing ﬁeld. The expressions M = χ H and B = μμ0 H loose here their sense. They can be used only formally, having in mind that χ and μ are not constants, but complex functions of the intensity. In contrast to diamagnetic and paramagnetic materials, which can be found in any state of aggregation, ferromagnetic properties are observed only in crystals. In liquid or gaseous state, ferromagnetic substances behave as usual paramagnetic materials, i.e. as it is conﬁrmed by experience, ferromagnetic properties are determined not by special properties of the atoms of these substances, but by the special structure of their crystal lattice. A change in the structure of the lattice brings a corresponding change in the magnetic properties of ferromagnetic materials. For every ferromagnetic material there is deﬁnite temperature – the Curie point, beyond which the ferromagnetic properties of the substance disappear: for Fe the Curie point is 770 ◦ C, for Ni 360 ◦ C, for permalloys (alloy 70% Fe and 30% Ni) is 70 ◦ C. Since ferromagnetism is present only in crystals, which are anisotropic, then a single crystal of ferromagnetic substance must be anisotropic in terms of magnetic properites. Experience actually conﬁrms that the magnetic properties of single crystals are diﬀerent in diﬀerent directions. The graphs below (Fig. 9.2) represent of magnetization of a single crystal Fe, which has a lattice of the kind of body-centered cube (bcc). The edge of cube is the direction of soft magnetization; the diagonal of cube is the direction of hard magnetization. In polycrystals the anisotropy of magnetization does not manifest itself, because the various microcrystal particles are oriented disorderly. Ferromagnetic materials have hysteresis, consisting in the fact that the magnetization of a ferromagnetic material depends not only on the intensity M a

104 A/m

b

128

c b

96

c

64 a

0

16

32

H . 104 A/m

Fig. 9.2. Diagram of the dependence of magnetization of a crystal of iron on the intensity of the magnetic field

380

9 Magnetoelasticity

of the magnetic ﬁeld in a given moment, but also on the pre-magnetization model, its “magnetic history.” Therefore, it cannot be generally indicated, what magnetization of a ferromagnetic material corresponds to a given value of the intensity of the magnetizing ﬁeld, if it is not known, in what state it was found before. The same holds, naturally, for the values μ and χ. In Fig. 9.3 point 0 refers to absence of magnetization. The section 0a is the dependence of M (H) when magnetization is produced for the ﬁrst time. When a value H > Hs is reached (to these values of ﬁeld corresponds the magnetization saturation Ms ) M stops increasing. In case when saturation is achieved, the intensity of the ﬁeld H begins to decrease, then magnetization would drop not according to the curve 0a, but according to ab, i.e. to the same values H, assumed in the reverse order, correspond larger values of M . When H = 0, magnetization does not disappear, but residual magnetization Mr is preserved (segment 0b). → − When H is applied in the opposite direction and a ﬁeld with intensity (−Hc ) appears, magnetization equals to zero. The intensity of the magnetizing ﬁeld Hc is called coercive force. With larger increase of the inverse in direction ﬁeld H magnetizability of opposite sign appears. In this case, saturation can also be reached (point a ). If the magnetic ﬁeld increases further, then magnetization increases according to the curve a b c ; moreover, H = Hc M = 0. Diﬀerent ferromagnetic materials give very diverse hysteresis curves. With low values of Hc we get the so-called soft ferromagnetic materials (Fe, silicic steel, alloys Fe with Ni); with larger values of Hc , we get solid ferromagnetic materials (carbon and special steels). The peculiarities of ferromagnetic materials can be explained, following the classical theory of ferromagnetism, proposed by P. Weiss. According to his theory, in temperatures lower than the Curie point ferromagnetic materials consist of microscopic regions, called domains, in each of which the magnetic M Ms

b

Mr

c −Hc

0

b′ a′

a

c′ Hc

Hs

−Mr −Ms

Fig. 9.3. Hysteresis loop

H

9.2 The Magnetic Properties of the Substance

381

moments of the atoms are strictly located in one direction, which corresponds to the direction of the weak magnetization. Thus every domain is turned out magnetized to saturation independently from the presence of any external magnetic ﬁeld and its magnitude. The size of the domains is 10−2 –10−3 cm, i.e., they can be possibly observed by a microscope. In absence of external magnetic ﬁeld the domains in a single crystal are located in such a way, that their magnetic ﬁelds close each other and the resulting external magnetic ﬁeld is proved equal to zero. In the diagram, pointers show the direction of magnetization vectors inside the domains. As D.D. Landau and E.M. Lifschitz have shown, this system of domains in a single crystal characterize the state of minimum energy of the magnetic ﬁeld, which, from the standpoint of the laws of thermodynamics, ensures the stable equilibrium of entire system. Polycrystals consist of single grains, in which the directions of the lightest magnetization are oriented disorderly. Each grain is split into several domains, directed along the line of the lightest magnetization. Switching on a weak external magnetic ﬁeld, we will always ﬁnd many domains, in which the direction of magnetization vector coincides with the direction of the external ﬁeld. These domains would possess minimum of energy and therefore it would result to a state of stable equilibrium. Adjacent domains possess maximum energy. Therefore, an energetically proﬁtable situation is when the magnetic moments of some atoms change their direction and join to those domains, which energy is minimum. This process is called shift of the domain boundaries. When the intensity of the external magnetic ﬁeld increases, the boundaries of the domains are shifted more strongly and, in this case, the walls of the domains begin to meet on their path the defects of the crystal (dislocation, voids, inclusions), which prevent a change in the magnetic moment in the atoms located close to the defects. When the ﬁeld increases the energy of the atoms grows and the atoms change leap-wise their direction - the wall of the domain is stripped from this place and moved to the following defect. In this way, the process of the magnetization of polycrystals continues not smoothly, but leap-wise, which is conﬁrmed experimentally. In suﬃciently strong ﬁelds, all walls move to the boundaries of the crystalline grains, and every grain turns out magnetized along the direction of lightest magnetization, which forms the smallest angle with the direction of the external ﬁeld. If the intensity of the magnetizing ﬁeld is strengthened further, the magnetic moments of the grains begin to orient along the ﬁeld. When the magnetic moments of all grains would be oriented along the ﬁeld, magnetic saturation begins. In this way, using the idea of the domain structure of ferromagnetic materials, it is possible to explain all peculiarities of the process of their magnetization. The Curie point is proved to be the temperature, beyond which the domain structure destructs.

382

9 Magnetoelasticity

Two questions remain open: 1) what forces lead to the situation, when inside the domain the magnetic moments of all atoms spontaneously are oriented along the direction of weak magnetization. 2) Why some substances possess ferromagnetic properties, while others do not. Answers to these questions are provided by the quantum theory of magnetic phenomena. Antiferromagneticism The study of the properties of ferromagnetic materials led D.D. Landau to the conclusion that there must exist substances, in which, under low temperatures, the magnetic moments are oriented in antiparallel manner, i.e. the magnetic moments of two adjacent atoms are located in opposite direction to each other. Later, compounds like MnO, MnS, CrT3, NiCr and others were discovered experimentally. Antiferromagnetic materials are characterized by a temperature (called Neel’s point), beyond which the described magnetic order is destroyed and the substance behaves in a way like a paramagnetic material. Ferrimagnetism Let us think about a substance with antiferromagnetic order, in which half of the atoms Mn are substituted with other paramagnetic atoms, which have large magnetic moment, for example, Fe. In a temperature lower than the Neel point, these substances are turned out spontaneously magnetized, since the diﬀerence of the magnetic moments between two adjacent paramagnetic atoms is not equal to zero. Such magnetic materials are called ferrites; they possess low electrical conductivity and are obtained by sintering the powders, which consist of thoroughly mixed oxides of ironwith oxides Li, Ni, Mn, and others.

9.3 General Relations of the Magneto-Elasticity of Electro-Conductive Bodies Let us consider the uniform isotropic linear elastic body, which possesses large electrical conductivity and is placed into a magnetic ﬁeld. Under mechanical action on this body, in the latter appear coupled electromagnetic and mechanical ﬁelds. In the solution of the problems of coupled magneto-elasticity for the above-described body Maxwell’s equations are used [167] → − → − − → ∂B = 0, div D = ρe , rot E + ∂t → − → − → ∂D − − → = j , div B = 0. rot H − ∂t

(9.4)

9.3 General Relations of the Magneto-Elasticity

383

The equations of motion of the elastic and electrically conducting medium, must be augmented by mass Lorentz force and by the force, caused by the existence of free charges in the electrical ﬁeld [135] ∂ 2 Ui ∂j σij + fi = ρ 2 i, j = 1, 3 , ∂t → − → − − → → − f = ρe E + j × B .

(9.5)

Hooke law for linearly elastic bodies [104] σij = 2μeij + λδij ekk

(9.6)

eij = (∂i uj + ∂j ui ) /2

(9.7)

Cauchy relations [104] The state equations for a moving isotropic medium, which does not possess properties of polarization and magnetization are given by [135, 140] − → → − → → − − → − → − → → D = ε · E + α− ν × H B = μe H − α− ν × E;

(9.8)

generalized Ohm’s law [135] − → → − → − → → j = ρe − ν +σ E +− ν ×B

(9.9)

→ → − − where E , H are the vectors of intensity of electrical and magnetic ﬁelds; → − − → → − D, B are the vectors of electric ﬂux density and magnetic induction; j is the density of the conductivity current; ρe is the density of free electrical charges; σij is the tensor of elastic stresses; ρ is the density of the material; → − u = (u1 , u2 , u3 ) is the displacement vector; μ, λ are the Lame constants; δij is the Kronecker symbol; εij is the tensor of elastic deformations; ε, μe are the → − → electrical and magnetic permeability of substance respectively; − ν = ∂∂tu is the velocity vector; α = εμ − ε0 μ0 ; σ is the conductivity of the environment. Equations (9.4)–(9.9) form a closed system of nonlinear equations of magneto-elasticity for the homogeneous isotropic medium. These equations should be solved with given initial conditions and taking into account the boundary conditions on the surface S of the section of the environments (in the general case with diﬀerent electromagnetic properties). The boundary conditions for the electromagnetic ﬁeld have the form: − − → → − → → − → − ∗ ν × D = jm − ρ∗e νm , (9.10) E +→ ν × B = 0, H − − τ τ − ∗ → − → → − − → ∂ρ → ν ×B = − e, B = 0, D = ρ∗e , σ E + − ∂t n n n → − → − where τ , m are the mutually perpendicular directions, parallel to the tangent → → → → to the plane S; − n is the direction, normal to S (so that vectors − τ ,− n,− m form the right-handed triad); the symbol [∗] indicates the jump of the corresponding

384

9 Magnetoelasticity

∗ magnitude on the surface S; jm , ρ∗e is the density of surface current and the surface electric charge density. In the formulation of boundary conditions for mechanical stresses and displacements it is necessary to consider that under the action of the electromagnetic ﬁeld, stretching and compressive forces appear in the environment, which are determined by the Maxwell electrodynamic stress tensor. The indicated boundary conditions have the form:

(9.11) [σij + τij ] nj = 0, [ui ] = 0, 1 τij = Ei Dj + Hi Bj − δij (Ek Dk + Hk Bk ) , 2 where nj are the unit vectors normal to the surface S; summation is performed according to the repetitive index. If a body is bounded by vacuum, then in the region, occupied by the vacuum, the following relations hold: • Maxwell’s equations: − → → − → ∂D − → ∂B − = 0, rot H − = 0, rot E + ∂t ∂t → − → − div D = 0, div B = 0; • Equations of state:

− → → − D = ε0 E ,

− → → − B = μ0 H

(9.12)

(9.13)

In the domain of vacuum, σij = 0. In this way, the system of relations (9.4)–(9.13) describes the mechanical and electromagnetic ﬁelds in the conjugated media. As a result of the nonlinearity of this system the solution of concrete problems is connected with serious mathematical diﬃculties; for this reason, one is compelled to address to its linearization.

9.4 Linear Magneto-Elasticity of Diamagnetic (Para-Magnetic) Materials Assume that into a stationary electromagnetic ﬁeld a linear elastic and electroconductive body is placed. The body is found in a state of rest − and nor sur→∗ ∗ face currents or electric charges exist in it j m = 0, ρe = 0 . Then for the determination of the electromagnetic ﬁeld in the domain, occupied by the body, we get the following equations of electro- and magneto-statics. → − → − → − → − → − rot E 0 = 0, div D 0 = 0, rot H 0 = j 0 , div B 0 = 0, → − → − − → → − → − − → − → div j 0 = 0, D 0 = ε E 0 , B 0 = μe H 0 , j 0 = σ E 0 , (9.14) − − − →0 →0 →0 E = 0, H = 0, D = 0. τ

τ

n

9.4 Linear Magneto-Elasticity of Diamagnetic Materials

385

After the determination of the electromagnetic ﬁeld, the corresponding stress-strained state of the body is determined from the solution of the problem of the static theory of the elasticity: − → − → 0 ∂j σij + j 0 × B0 = 0 i, j = 1, 3 (9.15) i

and the conjugation conditions (9.11), where 1 0 τij0 = Ei0 Dj0 + Hi0 Bj0 − δij Ek0 Dk0 + Hk0 Bk0 , σij = σij . 2

(9.16)

Let us carry out the linearization of the system of equations. At time t = 0, the motion of the above-described body is provoked by the application of external loads. The displacements of the points of the body and the connected electromagnetic ﬁelds caused in this way are described by small ﬂuctuations uj , ej , hj , such that uj = u0j + uj , Ej = ej , Hj = Hj0 + hj

(9.17)

Substituting (9.17) into the equation of magneto-elasticity and disregarding squares and the products of small disturbances, we obtain the equations of state (9.8) in the form − → − − → − → → − → − → − → → → D = ε− e + α− ν × H 0 , B = μe H 0 + h = B 0 + b (9.18) the generalized Ohm’s law (9.9): → − − → → → j =σ − e +− ν × B0

(9.19)

Maxwell’s (9.4): → − ∂b → rot− e + =0 ∂t → − ∂ − → − → − → → → ε→ e + α− ν × H0 rot h = σ − e +− ν × B0 + ∂t → − →0 − → − → − εdiv e + αdiv ν × H = 0, div h = 0; the equations of motion (9.5) will become → − − → → − ρe = 0 ⇒ f = j × B 0 − → ∂ 2 ui → − ∂j σij + j × B 0 = ρ 2 ∂t i

(9.20)

(9.21) i, j = 1, 3

386

9 Magnetoelasticity

the electromagnetic conditions of media conjugation given by (9.10): − − → → → − → − → e +− ν × B 0 = 0, h = 0, b = 0, τ τ n − → → − → → D = 0, σ − e +− ν × B0 = 0; n

(9.22)

n

the mechanical conditions of conjugation (9.11):

σij + hi Bj0 + bj Hi0 − μe δij Hk0 hk nj = 0 i, j = 1, 3 .

(9.23)

Usually, in the study of mechanical disturbances a quasi-static approximation is used: → − → − D = 0, ∂ D/∂t = 0. Then Maxwell’s (9.20) can be written as follows: → − → − − → − ∂b → − → = 0, rot h = j , div h = 0 rot e + ∂t

(9.24)

and, under the electromagnetic conditions of conjugation (9.22), the condition → − with respect to D disappears. The equationss of motion (9.21), taking into account (9.6), (9.7) and (9.24), take the form → → − − → u ∂2− → → u + (λ + μ) graddiv− u + rot h × B 0 = ρ 2 μ∇2 − (9.25) ∂t where ∇2 = ∂12 + ∂22 + ∂32 is the Laplacian operator. → Eliminating − e from (9.24) and taking into account the equality → − → − → − rotrot h + ∇2 h − graddiv h = 0, we obtain

− → →0 − ∂→ u ∂ − 2 ×H ∇ − σμe =0 h + σμe rot ∂t ∂t

(9.26)

The model of coupled magneto-elasticity described by (9.25), (9.26) can be simpliﬁed, if the medium in question is ideally electro-conductive (σ = ∞). We have → − → − → h = rot − u × H0 , → → → − − u ∂2− → → → μ∇2 − u + (λ + μ) graddiv− u + μe rotrot − u × H 0 × H 0 = ρ 2 , (9.27) ∂t → − → → ∂− u − → − → − , h = 0, b = 0. e = B0 × ∂t τ n

9.5 Equations of Magneto-Elasticity

387

9.5 Equations of Magneto-Elasticity Taking into Consideration the Eﬀect of Magnetization The action of an external magnetic ﬁeld on ferromagnetic materials manifests itself in magnetization, which consists of the fact that the body, placed into an external magnetic ﬁeld, acquires magnetic moment and undergoes magnetical action from the external ﬁeld. For soft-iron ferromagnetic materials (narrow hysteresis loop) the inﬂuence of induced currents is small in comparison with the eﬀect of magnetization. Therefore, it is possible to use the quasi-static approximation, i.e. equations of magneto-statics and the fact that μe does not depend on the magnitude of the intensity of the ﬁeld in case when magnetization is far from saturation,. In the deduction of the equations of motion of magnetized environments it is necessary to consider that, in such environments, on the unit of mass, enclosed inside an arbitrary elementary volume, act body forces fk = μ0 Mj Hk,j and Ik = μ0 εijk Mj Hi (εijk is the skew-symmetric symbol of Kronecker). Taking into account these expressions, from the principles of momentum and angular momentum conservation, follow the equations of motion: ∂i tij + μ0 Mi ∂i Hj = ρ

∂ 2 uj i, j = 1, 3 2 ∂t

(9.28)

and the relation tjk − tkj + μ0 (Mj Hk − Mk Hj ) = 0

(9.29)

where tij is the asymmetrical stress tensor (to its asymmetry leads the calculation of magnetization): tij = σij − μ0 (Mi Hj − Mj Hi )/2

(9.30)

where σij is the symmetrical stress tensor; M is magnetization. The equations of motion (9.28) can be written in the form: ∂i (tij + Tij ) = ρ

∂ 2 uj ∂t2

(9.31)

where Tij is the Maxwell asymmetrical stress tensor: Tij = μ0 {Hi Hj − (Hk Hk ) δij /2} + μ0 Mi Hj − → u = (u1 , u2 , u3 ) is the displacement vector. Equation (9.29) should necessarily be supplemented by the equations of magneto-statics: → − → − rot H = 0, div B = 0 (9.32)

388

9 Magnetoelasticity

and the conjugation conditions on the surface of the portion of the media: − − → → (9.33) B = 0, H = 0, [tij + Tij ]n = 0 n

τ

If a body is bounded by vacuum, then for the magnetic ﬁeld in the vacuum →e − H we get the equation: → − → − → − → − rot H e = 0, div B e = 0, B e = μ0 H e (9.34) Relations (9.32)–(9.34) should be augmented with the equations of state for the magnetized media, connecting stresses and magnetic ﬁeld with deformations and magnetization. In the quasi-static linear theory of magneto-elastic interaction in soft ferromagnetic materials without consideration of hysteresis losses and eﬀect of magnetostriction, magnetic magnitudes are represented in the form: → − − → − → − → → − − → → − − → → m, H = H + h (9.35) B = B + b, M =M +− 0

0

0

→ − − → → → − → − − → m where H 0 , B 0 , M 0 correspond to the non-deformed state of body; h , b , − are the ﬂuctuations of the corresponding magnitudes, caused by deformations and connected with deformations and stresses by linear diﬀerential equations and boundary conditions. The non-deformed state of body is determined by the equations of magnetostatics: → − → − → − − → (9.36) rot H 0 = 0, div B 0 = 0, H 0 = χ−1 M 0 , − − → → − − → − − → → → B 0 = μ0 H 0 + M 0 = μ0 μe H 0 , H 0 = 0, B 0 = 0. τ

n

For the case |Moj ∂j uj | << |mi | we get the following linearized relations [285]: • ﬁeld equations ∂ 2 ui ∂j tij + μ0 (Moj ∂j Hoi + M0j ∂j hi + mj ∂j H0i ) = ρ 2 , ∂t → − → − rot h = 0, div b = 0;

(9.37)

• material equations − → − − → → − → → → − m = χ h , b = μ0 h + − m = μ0 μe h , tij = σij + μ0 χ (H0i Hoj + Hoi hj + Hoj hi ) , Tij = Hoj Boi + Hoj bi + Boi hj − 0, 5μ0 δij (Hok Hok ) − μ0 δij (Hok hk ) , σij = λδij ∂k uk + μ (∂j ui + ∂i uj ) ; • Boundary conditions on the interfaces of the media [tij + Tij ] nj = Xin , εijk {nj [hk ] − nm ∂j um [H0k ]} = 0, ni [bi ] − nm ∂i um [B0i ] = 0, where Tij is the linearized Maxwell vector of stresses; X1n is the stresses, which act on the body from the side of the external normal to its surface.

10 Inﬂuence of the Induced Currents on the Dynamic Intensity of Piecewise-Uniform Electro-Conductive Bodies in Magnetic Fields

We examine below some stationary dynamic problems of magneto-elasticity for a piecewise-uniform and electro-conductive medium, which is placed in a → − magnetic ﬁeld H 0 . Under the combined inﬂuence of the mechanical and magnetic ﬁeld induced (vortex) currents appear, which lead to the appearance of Lorenz body forces. The consideration of these forces gives a supplementary tensor – the Maxwell stresses tij , which contribute to make important corrections into the intensity of the body. We examine below the plane and anti-plane deformations of the medium, which contains stress concentrators such as cracks, openings or inclusions. Boundary-value problems are reduced to integral equations, which are solved numerically with the application of mechanical quadratures method. The aim of our investigation is the evaluation of the inﬂuence of the initial magnetic ﬁeld, the orientation of the incident magneto-elastic wave with → − respect to the vector H 0 , the conﬁguration of the defect, the proximity of the border, the type and frequency of excitation to the stress intensity factors and concentration in the body. We actually investigate in pure form only the eﬀects, connected with the currents appearing in the body.

10.1 Initial Relations → − Let us suppose that a static magnetic ﬁeld H 0 acts in a magneto-elastic medium, found in a state of rest. The external excitation causes deformation of the body and, respectively an electromagnetic ﬁeld, which can be described → − → by the small ﬂuctuations − e , h . Further, it is assumed that this is quasi-static. → − − → − − → → → Assuming that H = H 0 + h , E =− e , ρe = 0, we obtain, on the grounds of Chapter 9, the following system of equations:

390

10 Induced Currents

– ﬁeld equations →

→

rot h = j ,

→

∂h rot e = −μe , ∂t →

→

→

→

→

→

div h = 0,

μ∇2 u + (λ + μ) graddiv u +μe j × H 0 = ρ

(10.1) 2→ u

∂ ; ∂t2

– material equations →

→

b = μe h ,

→

j =σ

→

→

→ 0

e +μe V × H

;

(10.2)

– coupling conditions → → → → → → e +μe V × H 0 = 0, h = 0, μe h · n = 0, τ τ → → → → σ e +μe V × H 0 · n = 0,

σij + μe Hi0 hj + Hj0 hi − δij Hk0 hk nj = 0.

(10.3)

The considered model of magneto-elasticity is valid for diamagnetic (paramagnetic) materials, for which the eﬀect of magnetizability of the material is insigniﬁcant. Further, for materials, such as Al, Cu and others, it is useful to simplify the model further, by assigning ideal conductivity to the medium (σ → ∞). In this case we ﬁnally obtain [135] →

→ → → ∂u → → 0 0 ×H , (10.4) h = rot u × H , e = −μe ∂t →

→

→

→

μ∇2 u + (λ + μ) graddiv u +μe rot h × H 0 = ρ

→

∂2 u . ∂t2

It is necessary to add coupling conditions to the system (10.4) on the line of interface of the media → → (10.5) h = 0, μe h = 0, n τ 0

σij + μe Hi hj + Hj0 hi − δij Hk0 hk nj = 0.

10.2 The Current-Conducting Medium with Tunnel Cracks in a Magnetic Field Let us examine now the situation, when the magneto-elastic medium is not homogeneous, but along the x3 -axis tunnel cracks Lj (j = 1, . . . , M ) exist,

→ − and the vector of the initial magnetic ﬁeld takes the form H 0 = 0, H 0 , 0 , H 0 = const.

10.2 The Current-Conducting Medium with Tunnel Cracks

391

The corresponding static ﬁeld (which does not depend on coordinate x3 ) is described by the system of equations μ∇2 u0i + (λ + μ) ∂i θ0 = 0 0

θ =

∂1 u01

+

2

μ∇ u3 = 0,

(i = 1, 2) ,

(10.6)

∂2 u02 , 2

∇ = ∂12 + ∂22

and the boundary conditions are

κμ0 2 H0 1 + κn22 n1 , 2

κμ0 2 0 0 H0 1 + κn22 n2 , σ12 n1 + σ22 n2 = X2n + 2

0 0 n1 + σ32 n2 = X3n , H1∗ = κH0 n1 n2 , H2∗ = H0 1 + κn22 , σ31 μe κ= − 1, n1 = cos ψ, n2 = sin ψ. μ0

0 0 n1 + σ12 n2 = X1n + σ11

(10.7)

Here, μe , μ0 are the magnetic permeability of the material and the substance, respectively, which ﬁlls the cavity of the crack (the vacuum); Ψ is the angle between the normal to the left edge Lj and the axis Ox1 (Fig. 10.1). The zero on top indicates the components of the static ﬁeld, and the star is related to the cavity of the crack. Thus, static ﬁelds are divided into the states of plane and anti-plane deformations. It should be noted that the magnetic permeability of many diamagnetic (paramagnetic) materials practically coincide with the magnetic permeability of the vacuum μ0 . Therefore it is possible to assume that κ = 0, which substantially simpliﬁes the formulation of boundary conditions. We pass to the determination of the ﬁeld of ﬂuctuations. We ﬁnd, according to (10.2), → → → 0 (10.8) = {H0 ∂2 u1 , −H0 ∂1 u1 , H0 ∂2 u3 ,} , h = rot u × H → → rot h × H 0 = H02 ∇2 u1 , 0, H02 ∂22 u3 .

x2

bj

L1

Lj 0

n

ψ

aj x 1

L2 H0 →

Fig. 10.1. Schema of piecewise-uniform conductor, placed into a magnetic ﬁeld H 0

392

10 Induced Currents

Taking into account these equalities we get the complete system of linear relations, which determine the ﬁeld of ﬂuctuations. Plane deformation: – equation of motion

∂ 2 u1 μ + μe H02 ∇2 u1 + (λ + μ) ∂1 θ = ρ 2 , ∂t 2 u ∂ 2 μ∇2 u2 + (λ + μ) ∂2 θ = ρ 2 , ∂t

(10.9)

– components of the electromagnetic ﬁeld h1 = H0 ∂2 u1 , h2 = −H0 ∂1 u1 , ∂u1 , e2 = e1 = 0; e3 = −μe H0 ∂t

h3 = 0,

(10.10)

– boundary conditions on Lj (j = 1, . . . , M ) σ11 n1 + σ12 n2 = μ0 κH0 {h2 + κn2 (h1 n1 + h2 n2 )} n1 + X1n ,

σ21 n1 + σ22 n2 = μ0 κH0 1 + κn22 (h1 n1 + h2 n2 ) + X2n ,

h∗1 = h1 1 + κn21 + κh2 n1 n2 ,

h∗2 = h2 1 + κn22 + κh1 n1 n2 , ∂u1 = 0. e∗3 + μe H0 ∂t

(10.11)

Anti-plane deformation: – equation of motion μ∇2 u3 + μe H02 ∂22 u3 = ρ

∂ 2 u3 ∂t2

(10.12)

– components of electromagnetic ﬁeld h3 = H0 ∂2 u3 , h1 = h2 = 0, ∂u3 , e2 = e3 = 0; e1 = μe H0 ∂t

(10.13)

– boundary conditions on Lj σ31 n1 + σ32 n2 = X3n , h∗3 = h3 = H0 ∂2 u3 .

(10.14)

Here the stars are assigned to the ﬁeld components in the cavity of the crack.

10.2 The Current-Conducting Medium with Tunnel Cracks

393

10.2.1 Antiplane Deformation of the Infinite Ideal Conductor with Tunnel Cracks Under mechanical disturbances, which set the particles of the medium to motion, connected wave mechanical and electromagnetic ﬁelds ui , σij , hi , ei appear in it, which are described in Sect. 10.1. We assume here that plane magneto-elastic shear wave

(10.15) u3 = Re e−iωt U0 , U0 = τ exp {−iγh (x1 cos β + x2 sin β)} , τ = const, γh = γ2 1 + h2c sin2 β, h2c = μe H02 μ, γ2 = ω/c2 . is radiated from inﬁnity. the action of harmonically changing with time load X3n =

In this case, Re e−iωt X3 , X3 = X3 (x1 , x2 ) is possible on the surfaces Lj . Under such conditions in the magneto-elastic medium appears a stationary wave ﬁeld that corresponds to anti-plane deformation. The mechanical wave ﬁeld of displacements W is formed from the incident wave U0 and the scattered by defects wave U . Let us represent the scattered wave in the following form: ∂ 1 (1) p (ζ) H (γ2 r1 ) dζ1 − (10.16) U (x1 , x2 ) = 2 ∂ζ1 0 L ∂ (1) (1) − H0 (γ2 r1 ) dζ 1 + q (ζ)H0 (γ2 r1 ) ds, ∂ζ 1 L

where iξ2 ζ1 = ξ1 + , 1 + h2c ix2 z1 = x1 + . 1 + h2c

ζ = ξ1 + iξ2 ∈ L = ∪Lj , r1 = |ζ1 − z1 | ,

The functions p (ζ) = {pj (ζ) , ζ ∈ Lj } , q (ζ) = {qj (ζ) , ζ ∈ Lj } (1)

are the unknown “densities”; Hn (x) is the Hankel function of the ﬁrst order of n order; ds is element of the contour arc L. The density p (ζ) has a simple mechanical sense: p (ζ) = − 12 [U (ζ)], where [U (ζ)] = f is the jump of the displacement amplitude on L.

394

10 Induced Currents

Function u3 = Re e−iωt U , where U is determined by the formula (10.16), is the solution of (10.12); it also satisﬁes the emission conditions. Consequently, let us represent the mechanical boundary conditions (10.14) on L in complex form c (ψ)

∂ (U + U0 ) ∂z1

X3+ = −X3− = X3 ,

±

± ∂ + c (ψ) (U + U0 ) = ±X3± , ∂ z¯1 sin ψ c (ψ) = cos ψ + i . 1 + h2c

(10.17)

Here, the upper sign corresponds to the left lip of Lj (in the movement from its beginning aj to the end bj ), ψ is the angle between the positive normal to the left edge and the axis Ox1 (Fig. 10.1). Let us require, in accordance with (10.17), that the vector of mechanical stress is continuously extended through the sections. Realizing the operations speciﬁed there, we ﬁnd the relation between the densities dp 1 d (ψ) , 4i ds h2c d (ψ) = sin 2ψ. 1 + h2c q (ζ) =

(10.18)

In view of equality (10.18), it is suﬃcient that the boundary conditions are satisﬁed only on one of the edges Lj (j = 1, . . . , M ). Substituting in (10.17) the limiting values of the functions occurring there, we get to the following singular integro-diﬀerential equation f (ζ) g (ζ, ζ0 ) ds + f (ζ) G (ζ, ζ0 ) ds = N (ζ0 ) , ζ0 ∈ Lj , (10.19) L

L

1 c (ψ0 ) sin 2ψ (1) H1 (γ2 r10 ) × Re c (ψ0 ) e−iα10 + Im , 4i 1 + h2c π ζ1 − ζ10 γ2 G (ζ, ζ0 ) = 2 H2 (γ2 r10 ) Im e2iα10 c (ψ0 )a (ψ) 4i (1) + H0 (γ2 r10 ) Im a (ψ) c (ψ0 ) , g (ζ, ζ0 ) = −

γ2 h2c

N (ζ0 ) = 2iτ γh cos (ψ0 − β) × exp {−iγh (ξ10 cos β +ξ20 sin β)} +

(1) H2 (x) = H2 (x) + 4i πx2 , i i ζ10 = ξ10 + ξ20 , a (ψ) = cos ψ − sin ψ, 2 1 + hc 1 + h2c r10 = |ζ 1 − ζ10 | ,

α10 = arg (ζ1 − ζ10 ) ,

f (ζ) = df /ds.

2 X3 (ζ0 ) , μ

10.2 The Current-Conducting Medium with Tunnel Cracks

395

It is necessary that (10.19) would be examined in combination with the additional conditions df = 0 (j = 1, . . . , M ) . (10.20) Lj

The system of (10.19), (10.20) has a unique solution in the class of functions with unlimited derivatives in the ends Lj (on the assumption that the curvatures of the contours Lj and the function X3 (ζ) satisfy the Holder condition [103, 168]). We obtain the formula for the determination of the stress intensity factor for the mechanical stresses in the tips of the defect. Let us parameterize contour Lj : ζ = ζ (δ) , ζ0 = ζ (δ0 ) , −1 ≤ δ, δ0 ≤ 1. In accordance with this, we pose Ω0 (δ) ds > 0. , Ω0 (δ) ∈ H [−1, 1] , s (δ) = f (ζ) = √ 2 dδ 1 − δ s (δ)

(10.21)

The singular part of “elastic” stress σn3 = σ13 n1 + σ23 n2 on the extension beyond the edge of the defect is determined by relations (10.16), (1.6) and takes the following form

(10.22) σn3 = Re Sn3 e−iω t , c (ψc ) dζ1 μ · Sn3 = S13 cos ψc + S23 sin ψc = f (ζ) Im 2π a (ψ) ζ1 − z1 L c (ψc ) dζ1 d (ψ) Re · + , 2 a (ψ) ζ1 − z1 where ψc is the angle between the normal to the left edge Lj in the tip c (c = a or b) and the axis 0x1 . The asymptotic analysis of this expression, in consideration with the formula (10.21), gives √

(10.23) KIII = lim 2πrRe e−iω t Sn3 , r→0

√

−1 μ πΩ0 (±1) h4c cos2 ψc Sn3 = − 1 + h2c + sin2 ψc × 1 + h2c sin2 ψc . 2 2 s (±1) 1 + hc Thus, the mechanical stress intensity factor KIII is expressed in terms of the solution of equations (10.19), (10.20). When hc = 0, we obtain an algorithm, which corresponds to isotropic medium with the tunnel cracks [270]. It is evident from formula (10.23) that in the neighborhood of the tip of crack redistribution of that part of the stress tensor takes place, which has mechanical origin.

396

10 Induced Currents

The summarizing stress intensity factor, which considers both the mechanical and Maxwell part of the stress tensor, is determined through the singular part of the expression Q = (S13 + T13 ) cos ψ + (S23 + T23 ) sin ψ,

tj3 = Re Tj3 e−iω t .

(10.24)

Using relations (10.8) and the formulas t31 = 0, we ﬁnd

t32 = μe H0 h3 ,

Q = μ cos ψ∂1 W + 1 + h2c sin ψ∂2 W .

The asymptotic analysis of this expression gives μ 1 + h2c Ω0 (±1) Q=± . 2 2rs (±1) The summarizing stress intensity factor has the form √

−i ω t μ π (1 + h2c ) s KIII = lim 2πrRe Qe |Ω0 (±1)| cos ωt − δs± . = r→0 2 s (±1) (10.25) It should be noted here that the parameter of magnetic pressure h2c does not implicitly appears in the value Ω (±1), since the kernel and the right side of integral equation (10.19) depends on h2c .

10.3 Half – Space Let us examine now a half-inﬁnite (x2 ≥ 0) ideally conducting elastic medium, bordering to vacuum and weakened by tunnel cracks Lj along x3 -axis → − (Fig. 10.2). A static magnetic ﬁeld H 0∗ = (0, H0∗ , 0) and a ﬁeld (0, H0 , 0) appear in the vacuum and the medium respectively, where H0 = H0∗ μ0 /μe . Let us assume that a magneto-elastic wave (10.15) from inﬁnity,

is radiated and on the contours Lj changing load X3n = Re e−iωt X3 acts.

L1 bj L2 x2

Lj x1

n

ψ aj H0

Fig. 10.2. Half-space with tunnel defects

10.3 Half – Space

397

The mechanical boundary conditions on the sections contours Lj take the form (10.14), and on the free from forces boundary of the half-space x2 = 0 we have σ23 = 0. The wave ﬁeld of displacements u3 is formed from the ﬁeld of the incident wave (10.15), the reﬂected u∗3 and scattered by defects waves, according to relationship [275]

u3 = Re e−i ω t W , W = U0 + U∗ + U, (10.26) U∗ = τ exp {−iγh (x1 cos β − x2 sin β)} , ∂ 1 ∂ p (ζ) E (ζ1 , z1 ) dζ1 − E (ζ1 , z1 ) dζ 1 U (x1 , x2 ) = 2 ∂ζ1 ∂ζ 1 L + q (ζ) E (ζ1 , z1 ) ds, E (ζ1 , z1 ) =

L (1) H0

(1) (γ2 r1 ) + H0 (γ2 r1∗ ) , r1 = |ζ1 − z1 | , r1∗ = ζ 1 − z1 .

The function W , determined by formula (10.26), is the solution of the corresponding Helmholtz equation, satisﬁes the conditions for emission and the above-indicated boundary condition on the line x2 = 0 (Fig. 10.3). The stated boundary problem, taking into account the formulas (10.26), is reduced to the singular integro-diﬀerential equation of the form (10.19), where the kernel and the right side are determined as follows: c (ψ0 ) 1 γ2 h2c sin 2ψ Im − π ζ1 − ζ10 4i 1 + h2c

(1) × H1 (γ2 r10 ) Re c (ψ0 ) e−iα10 + ∗ (1) ∗ + H1 (γ2 r10 , ) Re c (ψ0 ) e−iα10 2 γ G (ζ, ζ0 ) = 2 H2 (γ2 r10 ) Im e2iα10 c (ψ0 )a(ψ) + (10.27) 4i ∗ (1) ∗ × Im e−2iα10 c (ψ0 ) a (ψ) + H0 (γ2 r10 ) Im (a (ψ) c (ψ0 )) , g (ζ, ζ0 ) =

z1 L

ζ1

α

L

ζ1

α∗ x1

α∗

α1 z1

ζ1

ζ1

Fig. 10.3. To the satisfaction of the boundary condition on the plane x2 = 0

398

10 Induced Currents

N (ζ) = 2iτ γh {cos (ψ0 − β) exp [−iγh (ξ10 cos β + ξ20 sin β)] + 2 + cos (ψ0 + β) exp [−iγh (ξ10 cos β − ξ20 sin β)]} + X3 (ζ0 ) , μ

∗ r10 = ζ 1 − ζ10 , r10 = |ζ1 − ζ10 | , α∗10 = arg ζ 1 − ζ10 , α10 = arg (ζ1 − ζ10 ) . Equations (10.19), (10.20), combined with formulas (10.27) determine uniquely the solution in the class of functions with unlimited derivatives at the ends of the arcs Lj . The summarizing stress intensity factor is computed from formula (10.25). For the representation of the results of calculations, let us introduce the parameter Th [286, 287] iμτ γ2 sin (ϕ − β) , Th = 1 + h2c sin2 (ϕ − β)

(10.28)

where ϕ = 0; π/2 and π/4 for the horizontal, vertical and inclined cracks, respectively. Taking into account (10.28) we can write √

(10.29) KIII = Th πlα± cos ωt − δ ± , √

s ± = Th πlα± KIII s cos ωt − δs , s where KIII , KIII are the elastic and complete stress intensity factors, respectively. The results of calculations are presented in Figs. 10.4–10.10. The ﬁrst ﬁgure is related to the unbounded medium with rectilinear elevation of

α+

3 1 2 1

0 2.5

γ 2l

Fig. 10.4. Rectilinear crack oriented along the magnetic ﬁeld

10.3 Half – Space

α+

–

399

+ H0

2 1 2 3 1

0

1

γ 2l

Fig. 10.5. Crack, perpendicular to the ﬁeld at angle to an incident wave

length 2l. A magneto-elastic wave (10.15) falls from inﬁnity along the x1 -axis. Curves 1, 2 and 3 are built for the values of parameter hc = 0; 0,5 and 1, respectively. Here, by points and small crosses are substituted results from the paper of Shindo [287]. The situation, when a magneto-elastic wave falls to a horizontal crack in the half-space at angles 600 , 900 and 1200 , is presented in Figs. 10.5, 10.6 and 10.7, respectively. Here the distance from the border of the half-plane to the crack is equal to its length. α+

2 1 2 3 1

0

1

γ 2l

Fig. 10.6. Dependence of the relative coeﬃcient of the intensity of stresses on the normalized wave number

400

10 Induced Currents

α+

H0

2 1 3 2 1

0

1

γ 2l

Fig. 10.7. Rectilinear crack, perpendicular to magnetic ﬁeld, wave falls at angle of 1200

In Fig. 10.8, the graphs are constructed for the crack, sloped toward the x1 -axis at angle 450 ; in this case, the wave falls to the crack along the x2 -axis (the distance from the center of the crack to the border x2 = 0 equals to the length of the crack). The case, when there is no incident wave, and excitation is produced by harmonic in time shift load on the edges of crack, is examined in Fig. 10.9. Figure 10.10 gives the result of calculation for the parabolic crack described by ξ1 = R1 δ, ξ2 = Rδ 2 , (−1 ≤ δ ≤ 1) when α = α± and αs = α± s , in an inﬁnite α+ 1 H0

2 3 2 1

0

1

γ 2l

Fig. 10.8. Rectilinear crack, oriented at angle of 450 to the direction of the magnetic ﬁeld and incident wave

10.3 Half – Space α+

401

+ -

2 3 2 1 1

0

γ 2l

1

Fig. 10.9. Change in the relative stress intensity factor for the case of harmonic in time shift load on the edges of the crack

space. Curves 1, 3 are constructed for the straight crack (R1 = 1, R = 0), curves 2, 4, 5, for the parabolic crack (R1 = 1, R = 1). Curve 5 corresponds to hc = 0, while the other ones to hc = 1. Graphs 1, 2 illustrate the change of αs , and the rest the change of α. It should be noted that the inﬂuence of magnetic ﬁeld is essentially shown (especially in the half-space with defect) close to the peak values of the normalized wave number. The initial magnetic ﬁeld smoothes out the curves of the intensity coeﬃcient, as if it was introduced a supplemental “inertness” of the medium. α+, α+s 1 2

2 3 4 1 5

0

1

γ 2l

2

Fig. 10.10. Change of the magnitudes α+ and α+ s for parabolic crack

402

10 Induced Currents

10.4 Layer and Semi – Layer Let us examine an ideally conducting elastic semi-layer 0 ≤ x1 ≤ a, 0 ≤ x2 < ∞, −∞ < x3 < ∞, weakened by a tunnel crack along the axis x3 → − and found in a static magnetic ﬁeld H 0 = (0, H0 , 0). Let a shear wave of displacement (10.15), when β = π/2, is radiated from inﬁnity, and the surface crack is either free from forces or subjected to harmonic with time force which is independent from x3 (0, 0, X3n ). In this case a stationary wave process appears in the body, to the anti-plane deformation of the

which corresponds → semi-layer − u = Re 0, 0, W e−iωt . We assume that the bases of the semi-layer are free from forces. In this case, ∂1 U3 = 0, when x1 = 0 and x1 = a. The conditions on the end border x2 = 0 can be given in the form A (A − 1) U3 + A (A + 1) ∂2 U3 = 0.

(10.30)

In this case, if A = 1 or A = −1, we get the free or the ﬁxed edge of the semi-layer, respectively; if A = 0 – we examine the layer 0 ≤ x1 ≤ a, −∞ < x2 < ∞, −∞ < x3 < ∞. The boundary condition on the crack contour L can be written in the form ± ∂U3 1 = X3± (ζ) , ζ ∈ L, (10.31) ∂n μ where the upper sign corresponds to left edge of the section (see Fig. 10.11), moreover, [X3 ] = 0 on L. x2

n

Lj

bj

aj L1 a1

b1

0

a x1

H0

Fig. 10.11. Semi-layer with defects

10.4 Layer and Semi – Layer

403

The solution of the posed boundary problem can be represented in the form of superposition of the falling, reﬂected and scattered waves. We get W = U0 + AU∗ + U, (10.32) U0 = τ exp −iγ2 x2 1 + h2c , U∗ = τ exp iγ2 x2 1 + h2c , ∂G h2c sin 2ψ ∂G U (x1 , y1 ) = −i p (ζ) dζ1 − dζ1 − Gp (ζ) ds, ∂ζ1 ∂ζ1 2 1 + h2c L

L

G = G (ξ1 , x1 ; ξ2∗ , x∗2 ) = g (ξ1 , x1 ; ξ2∗ − x∗2 ) + Ag (ξ1 , x1 ; −ξ2∗ − x∗2 ) , ∗ ∗ ∗ ∗ ∞ eiγ2 |ξ2 −x2 | 1 e−λk |ξ2 −x2 | g (ξ1 , x1 ; ξ2∗ − x∗2 ) = − cos αk ξ1 cos αk x1 , 2iaγ2 a λk k=1

x2 ξ2 πk , ζ = ξ1 + iξ2 ∈ L, , ξ2∗ = , αk = x∗2 = 2 2 a 1 + hc 1 + hc ζ1 = ξ1 + iξ2∗ , λk = α2k − γ22 (γ2 < αk ) , λk = −i γ22 − α2k (γ2 > αk ) . Here p (ζ) is the unknown density; U∗ is the wave reﬂected from the end border of the semi-layer; G is the Green function of boundary-value problem for the half-strips 0 ≤ x1 ≤ a, 0 ≤ x2 < ∞; g is the Green function for the strip 0 ≤ x1 ≤ a, −∞ < x2 < ∞. Integral representation (10.32) satisﬁes the diﬀerential equation ∇2 U3 + 2 2 hc ∂2 U3 + γ22 U3 = 0, which follows from the wave (10.12), the emission condition, and the boundary conditions on the faces of the semi-layer. It ensures the existence of the displacement jump, as well as the continuity of the stress vector in the section. Subsequently, we will strengthen the convergence of the series, by introducing function g, and summing up its principal part. After the appropriate transformations, we get

π 1 π ln 4 sin (ζ1 − z1 ) × sin ζ 1 + z1 − (10.33) g (ξ1 , x1 , ξ2∗ − x∗2 ) = 2π 2a 2a ∗ 1 ∗ 1 − |ξ − x∗2 | + eiγ2 |ξ2 −x2 | 2a 2 2iaγ2 ∞ 1 1 −λk |ξ2∗ −x∗2 | 1 −αk |ξ2∗ −x∗2 | − e − e a λk αk k=1

cos αk ξ1 cos αk x1 , ix2 iξ2 z1 = x1 + , ζ1 = ξ 1 + , 2 1 + hc 1 + h2c

iξ2 ζ = ξ1 − . 1 + h2c

Thus, function g has logarithmic singularity at the point of application of the concentrated functional. The general term of the series in (10.33) damps as k −3 , when ξ2∗ = x∗2 and is exponential, when ξ2∗ = x∗2 . For the satisfaction of the boundary conditions (10.31) in the sections it is necessary to compute the normal derivative of function (10.32). Further,

404

10 Induced Currents

regularizing the diverging integrals and repeatedly summing up the principal parts of the series for the second derivatives of Green function, we reduce the boundary equality (10.31) to the singular integro-diﬀerential equation

{p (ζ) h (ζ, ζ0 ) + p (ζ) H (ζ, ζ0 )}ds = N (ζ0 ) ,

ζ0 ∈ L,

(10.34)

L

h (ζ, ζ0 ) = Im

h2 c (ψ0 ) 1 c + sin 2ψ {Re [c (ψ0 ) ζ1 − ζ10 8a 1 + h2c

× (ctg ζ2 − ctg ζ3 + 2i sign r2 )] −

2 sin ψ0 × sign η2 e−iγ2 |η2 | −Aeiγ2 η3 2 1 + hc

ϕ2k −4 c1k (αk ϕ1k s2k cos ψ0 − c2k sin ψ0 , 1 + h2c k=1 π H(ζ, ζ0 ) = − 2 Im{c (ψ)[c(ψ0 )(ζ2−2 − cos ec2 ζ2 )+ 8α γ2 + c(ψ0 ) cos ec2 ζ3 ]} + 2 [cos(ψ − ψ0 ) ln | sin ζ2 |− 4π 1 + h2c π − cos (ψ + ψ0 ) ln |sin ζ3 | + 2 ln 2 − |η2 | sin ψ sin ψ0 − a 1 iγ2 −iγ2 |η2 | sin ψ sin ψ0 e + Aeiγ2 η3 + × − 2 2a 1 + hc a 1 + h2c ∞

×

3 ϕ3k c1k c2k sin ψ sin ψ0 − α2k ϕ1k s1k s2k cos ψ cos ψ0 + k=1

s1k c2k + αk ϕ2k cos ψ sin ψ0 − 1 + h2c c1k s2k sin ψ cos ψ0 2 1 + hc 2 γ2 −αk |η2 | + (s1k s2k cos ψ cos ψ0 + c1k c2k sin ψ sin ψ0 ) e , αk N (ζ0 ) =

1 τ X3 + sin ψ0 exp −iγ2 x2 1 + h2c μ 2a 1 + h2c 1 + h2c , − A exp iγ2 x2

i sin ψ dc (ψ) c (ψ) = cos ψ + , , c (ψ) = dψ 1 + h2c 1 1 ϕ1k = [exp (−λk |η2 |) + A exp (−λk η3 )] − exp (−αk |η2 |) , λk αk ϕ2k = sign η2 [exp (−λk |η2 |) − exp (−αk |η2 |)] − A exp (−λk η3 ) , ϕ3k = λk [exp (−λk |η2 |) + A exp (−λk η3 )] − αk exp (−α3 |η2 |) ,

+

10.4 Layer and Semi – Layer

ζ2 =

405

π π (ζ1 − ζ10 ) , ζ3 = ζ1 + ζ10 , 2a 2a ξ2 − ξ20 , η2 = 1 + h2c ξ2 + ξ20 η3 = , 1 + h2c ζ10 = ξ10 + iξ20 ,

c1k = cos αk ξ1 ,

c2k = cos αk ξ10 ,

s1k = sin αk ξ1 , s2k = sin αk ξ10 .

Kernel h (ζ, ζ0 ) is singular; H (ζ, ζ0 ) has logarithmic singularity. Equation (10.34) must be examined together with the condition of closure of the crack p (ζ)ds = 0. (10.35) L

The deﬁned algorithm uniquely determines the density p (ζ) in the class of functions with unlimited derivative. Further, it is convenient to parameterize the contour of the section ζ = ζ (β) , −1 ≤β ≤ 1. Accordingly, let us assume p (ζ) = Ω (β) / s (β) 1 − β 2 , where Ω (β) ∈ H [−1, 1]. Proceeding in the same way, as in Sect. 10.2, we ﬁnd the summarizing stress intensity factor π (1 + h2c ) μ s KIII Re e−iωt Ω (±1) . =± (10.36) 2 s (±1) The numerical solution of (10.34), (10.35) was made by the method of mechanical quadratures with the use of Gauss-Chebyshev quadrature formulas for the regular and singular integrals [24]. Let us write formula (10.36) in the form √ s = aT23 α± (10.37) KIII s cos {ωt − arg Ω (±1)} , 1 + h2c is the module of mechanical stress in the incident where T23 = μγ2 τ wave; the upper sign corresponds to the tip of crack b = ζ (1); the lower one, to a = ζ (−1). The results of calculations for the parabolic crack ξ1 /a = 0, 5+0, 2β, ξ2 /a = 1 + Rβ 2 (−1 ≤ β ≤ 1), are represented in Figs. 10.12–10.14. In the ﬁrst two ﬁgures, the dependence of value α− s from the normalized wave number γ2 a is illustrated. The value of curvature parameter R = 0 corresponds to the linear crack (Fig. 10.12); R = 0, 1, to the parabolic crack (Fig. 10.13). Curve 1 is constructed for ﬁxed (A = −1); curve 2, for free (A = 1) end edge of the semi-layer. Continual curves correspond to the value hc = 1, dotted curves to hc = 0.

406

10 Induced Currents αs–

y –

+

0

x H0

2.5

1

2 0

γ2a

3

Fig. 10.12. Coeﬃcient of the intensity of stresses for the parabolic crack in the semi-layer

α–s y x

0 H0

2.5

1 2 0 3

Fig. 10.13. Parabolic crack in the semi-layer

γ2a

10.4 Layer and Semi – Layer αs–

407

αs– 2

3

ϕ

2

2

2

0

45°

ϕ

0

3 45°

ϕ

Fig. 10.14. Dependences of the magnitude α− s on the orientation angle of the crack

It is evident that the applied magnetic ﬁeld shifts the points of extremes towards greater values γ2 a. For a speciﬁc value of the distance between the s linear crack and the end III becomes zero, of the half space, magnitude K 2 when γ2 a = (2k + 1) π 1 + hc /2 (A = −1) and γ2 a = kπ 1 + h2c (A = 1). With increase γ2 a for the layer (A = 0), the value α− s increases insigniﬁcantly. Figure 10.14 shows the change of α− s with the orientation angle ϕ of the rectilinear crack that is 0, 4a long, for the semi-layer with ﬁxed (A = −1, γ2 a = 4, for curve 1) and free (A = 1, γ2 a = π/2, for curve 2) end, as well as, for the layer (A = 0, γ2 a = 4, for curve 3). The equations of contour L take the form ξ1 /a = 0, 5 + 0, 2β cos ϕ, ξ2 /a = 1 + 0, 2β sin ϕ (−1 ≤ β ≤ 1). Continuous curves correspond to the value hc = 1, dotted-and-dashed ones, to hc = 0, 5, dotted, to hc = 0. From the results of computations follows that the nature of the inﬂuence of magnetic ﬁeld on the stress intensity factor dependents on both the orientation angle of the crack and the form of the boundary condition on the end x2 = 0. Thus, the applied static magnetic ﬁeld, that corresponds to the π value hc = 1, increases considerably the magnitude α− s , when 0 ≤ ϕ ≤ 4 , for all the considered values of the parameter A. At the same time, when π/4 ≤ ϕ ≤ π/2, the magnitude α− s increases sharply, in the case of the ﬁxed end, and increases insigniﬁcantly, in the case of layer and semi-layer with free end.

408

10 Induced Currents

10.5 Stress Concentration in the Opening in the Conducting Half-Space in Presence of Magnetic Field Let us examine below the inﬂuence of induced currents on the stress concentration in an opening in the state of anti-plane deformation. Let us assume that the diamagnetic (paramagnetic) half-space x2 ≥ 0, −∞ < x1 , x3 < ∞ is weakened by tunnel cylindrical cavities with cross sections Γj (j = 1, . . . , M ) along the x3 –axis and bounded by vacuum along the forces-free plane x2 = 0 (Fig. 10.15). Let us take the static magnetic ﬁeld in vacuum, in the form → − (0, H0∗ , 0), and in the body, in the form H 0 = (0, H0 , 0). Moreover, H0 = μ0 H0∗ /μe . As mechanical excitation let us take

the independent from the coordinate x3 shift load X3n = Re X3 e−iωt , acting on the surfaces of the cavities or the shift wave of displacement (10.15), falling from the inﬁnity. A mechanical ﬁeld in half-space is formed from the ﬁelds of the incident (10.15), the reﬂected (10.26) and the scattered by cavities waves. The later can be presented in the form [276] (1) (1) (10.38) U (x1 , x2 ) = p (ζ) H0 (γ2 r1 ) +H0 (γ2 r1∗ )} ds, Γ

ξ2 ζ1 = ξ1 + i , 1 + h2c r1 = |ζ1 − z1 | ,

x2 z1 = x1 + i , 1 + h2c ζ = ξ1 + iξ2 ∈ Γ = ∪Γj , r1∗ = ζ 1 − z1 ,

where p (ζ) = {pj (ζ) , ζ ∈ Γj } is the unknown density; integration along Γj is done counterclockwise. Formula (10.38) satisﬁes the boundary condition σ32 = 0 on the axis x2 = 0, no matter

which is the choice of the function p (ζ), and the function Re e−iωt U is the solution of (10.12). The boundary condition on Γ can be represented in amplitudes

0 1 0 1 cos ψ + S23 + S23 sin ψ = X3 , S13 + S13 + S13 + S23 (10.39)

n→ ψ

Γj

x2

β Γ1

0 x1

→

H0

Fig. 10.15. Half-space with tunnel cavities in magnetic ﬁeld

10.5 Stress Concentration in the Opening in the Conducting Half-Space

409

0 1 where Si3 , Si3 , Si3 are the amplitudes of stress in the scattered, the incident and the reﬂected waves, respectively. The procedure of satisfaction of this condition leads to the following integral equation with respect to the function p (ζ): p (ζ0 ) + p (ζ)G (ζ, ζ0 ) ds = N (ζ0 ) , (10.40) Γ

+ γ2 H1 (γ2 r10 ) Re c (ψ0 ) e−iα10 ∗ (1) ∗ , ) Re c (ψ0 ) e−iα10 +H1 (γ2 r10

2 η (ψ0 ) G (ζ, ζ0 ) = Re iπ

c (ψ0 ) ζ1 − ζ10

X3 (ζ) + iγh {U0 cos (β − ψ) + U∗ cos (β + ψ)} , μ c (ψ) γ2 , η (ψ) = −2iIm γh = , a (ψ) 1 + h2c sin2 β η (ψ) N (ζ) =

d c (ψ) , dψ

i sin ψ c (ψ) = cos ψ + , 1 + h2c ∗ r10 = |ζ1 − ζ10 | , r10 = ζ 1 − ζ10 ,

α10 = arg (ζ1 − ζ10 ) , α∗10 = arg ζ 1 − ζ10 , iξ20 , ζ0 = ξ10 + iξ20 ∈ Γ. ζ10 = ξ10 + 1 + h2c a (ψ) =

It should be noted that in absence of an initial magnetic ﬁeld (hc = 0), this is a Fredholm integral equation of second order. If hc > 0, then we get to singular equation of second order. When determining the wave ﬁelds of stresses in the body, it is necessary to take into account the Maxwell additives. Therefore, the total shift stresses on the area, perpendicular to the contour of the opening, can be represented by the formula

0

0 1 1 + σ23 + σ23 + t23 cos ψ − σ13 + σ13 + σ13 + t13 σ3S = σ23

(10.41) sinψ = Re T e−iwt . The Maxwell stresses ti3 , in our case, have the form t13 = 0,

t23 = μe H02 ∂2 u3 .

(10.42)

Appealing to the expressions for the stresses, taking into account formulas (10.15), (10.26) and theintegral representation (10.38), we obtain

410

10 Induced Currents

at point ζ0 ∈ Γ c (ψ0 ) + (10.43) T (ζ0 ) = −2iμ 1 + h2c p (ζ0 ) Re a (ψ0 ) + p (ζ) K (ζ, ζ0 )ds + iμγh {U0 sin (ψ0 − β) + U∗ sin (ψ0 + β)} , Γ

2iμ c (ψ0 ) (1) ∗ 1 + h2c Im − μγ2 bH1 (γ2 r10 ) + b∗ H1 (γ2 r10 ) , π ζ1 − ζ10 2 b = cos α10 sin ψ0 − 1 + hc sin α10 cos ψ0 , b∗ = cos α∗10 sin ψ0 − 1 + h2c sin α∗10 cos ψ0 , 2i (1) H1 (x) = + H1 (x) , ζ0 = ξ10 + iξ20 , πx

K (ζ, ζ0 ) =

the functions U0 , U∗ are determined by (10.15) and (10.26), respectively, when x1 = ξ10 , x2 = ξ20 . Let us consider an example. Let a half-space weakened by the cavity of elliptical cross section ξ1 = a1 cos ϕ, ξ2 = h + b1 sin ϕ. Let us assume that the surface of cavity is strainless and a magneto-elastic shear wave (10.15) falls from inﬁnity along the axis x2 . The results of calculations of the magnitude < T >= |T /T0 |, depending on the normalized wave number γ2 R, where T0 = μτ γh , R = (a1 + b1 ) /2, are represented in Figs. 10.16 and 10.17 for the following values of the parameters: a1 = 1, b1 = 0, 75, h = 1, 75. The curves in Fig. 10.16 correspond to the point of the contour ϕ = π/2, in Fig. 10.17, to the point ϕ = 0. The graphs 1–3 are built for hc = 0; 0,5 and 1, respectively. Curve 4 corresponds to the circular opening: a1 = b1 = 1; h = 1, 5; hc = 0; β = 7π/8; ϕ = −π/2. The points in Fig. 2.17 are data, obtained by a completely diﬀerent method [263]. T 3 2 1

5

4

2.5

0

0.5

1

γ2R

Fig. 10.16. Diﬀraction of magneto-elastic wave on the elliptical opening in presence of magnetic ﬁeld

10.6 Interaction of Crack and Opening in the Current-Conducting Medium

411

T

5

3 2

2.5

0

1

0.5

1

γ2R

Fig. 10.17. Results of comparison with the data of the work [263]

The results of calculations show that the inﬂuence of the initial magnetic ﬁeld when evaluating dynamic intensity of bodies with the stress concentrators is important and can’t be ignored. 10.5.1 Note The formula (10.43) is deduced without taking into account the straight and reverse traveling waves of Maxwell stresses. The consideration of these waves leads to the appearance of the following additional term in the right side of formula (10.43): Δ = iμh2c γh sin β cos ψ0 (U∗ − U0 ) .

10.6 Interaction of Crack and Opening in the Current-Conducting Medium in Presence of Magnetic Field Let us examine an unbounded current-conducting elastic medium, found → − in static magnetic ﬁeld H 0 = (0, H0 , 0) and weakened along the axis x3 (Fig. 10.18) by tunnel stress concentrators of the type of cracks Lj (j = 1, 2, . . . , M ) and openings Γk (k = 1, 2, . . . , N ). Let us assume that on the surfaces

of the concentrators acts a harmonic in time shift load X3n = Re e−iωt X3 , X3 = X3 (x1 , x2 ), and that emission of the shear magneto-elastic wave of displacement (10.15) is possible from the inﬁnity. Under these conditions, a stationary wave process takes place in the system, which corresponds to the anti-plane deformation of the body. The scattered ﬁeld in space with defects can be represented in the form [278]

412

10 Induced Currents

bj

β

ψ

Lj a j

x2 Γk

n→

x1

L1 →

H0

Fig. 10.18. Diagram of current-conducting space with tunnel heterogeneities

∂ ∂ (1) (1) p(ζ) H (γ2 r1 ) dζ1 − H0 (γ2 r1 ) dζ 1 ∂ζ1 0 ∂ζ 1 L (1) (1) + q (ζ) H0 (γ2 r1 )ds + w (ζ) H0 (γ2 r1 )ds,

1 U (x1 , x2 ) = 2

L

Γ

where p (ζ) = {pj (ζ), ζ ∈ Lj } and w (ζ) = {wk (ζ) , ζ ∈ Γk } are the unknown densities L = ∪ Lj , Γ = ∪ Γk ; contour integration of openings is done counterclockwise, along the contours of the cracks – from the beginning – point aj to the end bj ; all the remaining magnitudes are determined by (10.16), (10.18). With the aid of the standard procedure the boundary-value problem (10.14) on the contours Γk and the arcs Lj is reduced to the system of integral equations, which is not exposed here. Let us address ourselves directly to the results of calculations. The summarizing stress intensity factor is determined here by formula √

s ± KIII = Ph πlα± , s cos ωt − δ where Ph = −i μ τ γ; the upper sign corresponds to the tip of crack b, the lower one, to the tip a. The complete shift stress on the contour of the opening is determined by formula (10.41); moreover, its amplitude T can be represented in the form T = Ph T . Figures 10.19–10.21 give the results of calculations of the magnitude α± s for an unbounded medium, weakened by a cavity of elliptical cross section ξ1 = R1 cos ϕ, ξ2 = R2 sin ϕ (0 ≤ ϕ ≤ 2π), and a tunnel crack, whose cross section is the segment ξ1 = c1 δ + c2 , ξ2 = c3 δ + c4 (−1 ≤ δ ≤ 1). A shear magneto-elastic wave (10.15) is radiated from the inﬁnity along the axis x2 . The graphs in Fig. 10.19 are constructed for the elliptical opening (R2 /R1 = 0, 5; R1 = 1) and the horizontal crack (c1 = 1, c2 = 2, 2, c3 = c4 = 0). The curves in Fig. 10.20 illustrate the situation, when a circular opening (R1 = R2 = 1) is located strictly in the shadow of a horizontal crack (c1 = 1, c2 = c3 = 0, c4 = 2). Finally, Fig. 10.21 corresponds to the case, when crack is oriented to

10.6 Interaction of Crack and Opening in the Current-Conducting Medium

413

αs± 3 8 2 1 4

3 2 1

0

1

γ2R1

Fig. 10.19. Dependence of the magnitude α± s for the conﬁguration of elliptical cavity and rectilinear crack

the axis 0x1 at angle 450 (c1 = 0, 5; c2 = 0; c3 = −0, 5; c4 = 2) and a circular opening (R1 = R2 = 1) is partially located in the shadow of the crack. The continual lines correspond to the magnitude α− s , the stroked ones, to the magnitude βS = |T | at the point of ellipsis ϕ = 0. The curves 1, 2, 3 are constructed for the values hc = 0; 0,5 and 1, respectively.

αs±

3 2

1 3 1

0

1

γ2R1

Fig. 10.20. Diﬀraction of magneto-elastic wave on the crack and the elliptical opening

414

10 Induced Currents αs± 3 1

2

1 3 1

0

γ2R1

1

Fig. 10.21. Diﬀraction of magneto-elastic wave on the inclined crack and the circular opening

10.7 Diﬀraction of Shear Magneto-Elastic Wave in the Inclusions Let us examine the unbounded ideally electro-conductive elastic medium, in reference to the Cartesian axes 0x1 x2 x3 , which contains tunnel inclusions along the axis x3 of another kind, the cross sections of which are limited by suﬃciently smooth closed contours Γj (j = 1, 2, . . . , M ). → − A static magnetic ﬁeld H 0 = (0, H0 , 0) acts on the medium, and mechanical excitation is caused by a plane magneto-elastic wave of type (10.15). We assume below that magnetic permeabilities of matrix and inclusions are identical and their magnetizability may be disregarded. In this case, we get the anti-plane deformation of the medium with inclusions, which, according to (10.12)–(10.14), is described by the following system of equations: – diﬀerential equations in matrix and inclusions 2 ∇2 u3 + h2c ∂22 u3 = c−2 2 ∂2 u3 ∂t , (j) (j) (j) ∂t2 , ∇2 u3 + h2cj ∂22 u3 = c−2 2j ∂2 u3 h2cj = μe H02 μj ;

(10.44)

– electromagnetic components h1 = h2 = 0, h3 = H0 ∂2 u3 , e1 = −μe H0 ∂u3 /∂t, (j)

(j)

(j)

(j)

(j)

(j)

h1 = h2 = 0, h3 = H0 ∂2 u3 , e1 = −μe H0 ∂u3 (j)

(j)

e2 = e3 = 0, e2 = e3 = 0;

∂t,

(10.45)

10.7 Diﬀraction of Shear Magneto-Elastic Wave in the Inclusions

– conditions on the interface of media 0 σ3i + σ3i + t3i ni = 0, u3 + u03 = 0 (i = 1, 2) .

415

(10.46)

In (10.44)–(10.46) the index j corresponds to inclusion with border Γj ; hi , ei are the ﬂuctuations of the vectors of magnetic and electrical intensities; 0 σ3i , σ3i are mechanical stresses, which correspond to the incident wave and the scattered by inclusions ﬁeld; t3i is the Maxwell stresses; ni are the components of the unit vector of the external normal to the border of the media interface; the symbol [∗] indicates the jump of the corresponding function on Γj (Fig. 10.22). Mechanical and Maxwell stresses in the matrix and the inclusions are expressed through displacements with the aid of equalities

(j) (j) (10.47) σn3 = Re e−iωt Sn3 , σn3 = Re e−iωt Sn3 ,

(j) (j) tn3 = Re e−iωt Tn3 , tn3 = Re e−iωt Tn3 ,

(j) u3 = Re e−iωt W , u3 = Re e−iωt Wj , Sn3 = μ∂n W, T13 = 0,

(j)

Sn3 = μj ∂n Wj ,

(j)

T13 = 0,

T23 = μe H02 ∂2 W,

(j)

T23 = μe H02 ∂2 Wj .

For the formulation of the integral representation of the solution of the posed problem, let us introduce complex variables (j)

z1 = x1 + λx2 , z1 = x1 + λj x2 , i i λ= , λj = (j = 1, 2, . . . , M ) . 1 + h2c 1 + h2

(10.48)

cj

β Γ1 Γj →

H0

Fig. 10.22. Current-conducting elastic medium with inclusions in magnetic ﬁeld

416

10 Induced Currents

Let us assume [277] (j)

W = U0 + U, Wj = U0 + Uj , (1) U (x1 , x2 ) = p (ζ) H0 (γ2 r1 ) ds, Γ

Uj (x1 , x2 ) =

(1)

q (ζ) H0

(10.49)

(j) (j) γ2 r1 ds,

Γ

(j) U0

= τ exp −iγ (j) (x1 cos β + x2 sin β) , (j)

γ2 γ (j) = , 1 + h2cj sin2 β (j)

r1 = |ζ1 − z1 | , (j)

ζ1

r1

ω (j = 1, 2, . . . , M ), c2j (j) (j) = ζ1 − z1 , ζ1 = ξ1 + λξ2 , (j)

γ2 =

= ξ1 + λj ξ2 , ζ = ξ1 + iξ2 ∈ Γ = ∪Γj .

The densities p (ζ) = {pj (ζ) , ζ ∈ Γj } , q (ζ) = {qj (ζ) , ζ ∈ Γj } are the unknown functions that we will calculate; ds is the element of the arc of (1) contour Γj ; Hn (x) is the Hankel function of ﬁrst type and n-th order. Taking into account deﬁnitions (10.48), it is possible to show that the

(j) displacements u3 = Re e−iωt W , u3 = Re e−iωt Wj , where functions W and Wj are given in (10.49), satisfy the generalized wave (10.44) and the emission conditions [43, 161]. In this way, the problem is reduced to the determination of the unknown “densities,” p (ζ) , q (ζ) from the conjugation conditions of ﬁelds on the interface of the media (10.46). It should be noted (j) that the ﬁeld U0 is added to the wave ﬁeld Uj , for convenience. So, in the degenerate case, when the material of any inclusion coincides with the material of matrix, the wave ﬁeld in this region is automatically included in the wave ﬁeld of the matrix. The integral representations of mechanical and Maxwell stresses are obtained, by implementation of the speciﬁed in formulas (10.47) operations over functions (10.49). The substitution of the limiting values of the obtained expressions in the coupling conditions (10.46) leads to the system of integral equations ⎫ ⎬ q (ζ) Gj (ζ, ζ0 ) ds = N1 (ζ0 ), p (ζ0 ) − p (ζ) G (ζ, ζ0 ) ds + εj {q (ζ0 ) + ⎭ Γ

Γ

ζ0 ∈ Γ = ∪Γj , (1) (1) (j) (j) γ2 r10 ds = N2 (ζ0 ), p (ζ) H0 (γ2 r10 ) ds − q (ζ) H0 Γ

Γ

(10.50)

10.7 Diﬀraction of Shear Magneto-Elastic Wave in the Inclusions

G (ζ, ζ) =

417

a(ψ0 ) 1 iγ2 Im H1 (γ2 r10 ) Im a(ψ0 )e−iα10 , + π ζ1 − ζ10 2

(j) (j) aj (ψ0 ) 1 iγ2 (j) (j) −iα10 γ Im a , Im (j) H + r (ψ )e 1 j 0 2 10 π ζ − ζ (j) 2 1 10 → → → Sn0 cos(ψ0 − β) γ (j) μj −iγ (j) → r 0· k −iγ r 0· k N1 (ζ0 ) = e − e , γμ 2μ 1 + h2c → → → → S0 −iγ (j) r 0· k −iγ r 0· k −e , ψ0 = ψ (ζ0 ) , N2 (ζ0 ) = n e μγ μj 1 + h2cj εj = , a(ψ0 ) = λ cos ψ0 − sin ψ0 , Sn0 = μγτ, μ 1 + h2c

Gj (ζ, ζ0 ) =

(j)

ζ1 = ξ1 + λj ξ2 ,

(j)

ζ10 = ξ10 + λj ξ20 ,

r10 = |ζ1 − ζ10 | , ξ10 + iξ20 ∈ Γ, (j) (j) (j) r10 = ζ1 − ζ10 , α10 = arg (ζ1 − ζ10 ) , (j) (j) (j) α10 = arg ζ1 − ζ10 , H1 (x) =

→ − 2i (1) − + H1 (x), → r 0 · k = ξ10 cos β + ξ20 sin β, πx ζ1 = ξ1 + λξ2 , ζ10 = ξ10 + λξ20 .

The magnitude Sn0 is the amplitude of stress in the incident wave; the kernels G (ζ, ζ0 ) , Gj (ζ, ζ0 ) are singular (Cauchy kernel), the remaining kernels have logarithmic singularity. When hc = 0 (absence of initial magnetic ﬁeld), the ﬁrst (10.50) is converted into Fredholm integral equation of second order. After the solution of the system (10.50) and the determination of the functions p (ζ) and q (ζ) by the formulas (10.49), the amplitudes of the distrubuted ﬁeld of displacements U, Uj are restored and then the components of electrical, magnetic and mechanical ﬁelds are calculated by the relations (10.45), (10.47). The total shift stresses on the interface of the media (from the side of the matrix) can be determined by formulas

− − = Re e−iωt Ts− , σ3n = Re e−iωt Tn− , σ3s

−

− 0 0 + S23 + T23 cos ψ0 − S13 + S13 + T13 sin ψ0 , Ts− (ζ0 ) = S23

−

− 0 0 + S13 + T13 cos ψ0 + S23 + S23 + T23 sin ψ0 , Tn− (ζ0 ) = S13 ζ0 ∈ Γ.

418

10 Induced Currents

Substituting here the limiting values of the amplitudes of mechanical and Maxwell stresses, we ﬁnd # → → ih2c 1 + h2c sin 2ψ0 −iγ r0 · k − 0 Ts (ζ0 ) = iSn sin (ψ0 − β) e +μ p (ζ0 ) 1 + h2c sin2 ψ0 ⎫ → → ⎬ −iγ r0 · k + p (ζ) k (ζ, ζ0 )ds , Tn− (ζ0 ) = −iSn0 cos (ψ0 − β) e ⎭ Γ ⎧ ⎫ ⎨ ⎬ + iμ 1 + h2c 2p (ζ0 ) − p (ζ)K∗ (ζ, ζ0 ) ds , ⎩ ⎭ Γ

2 a∗ (ψ0 ) −iα10 + γ2 H1 (γ2 r10 ) Re a∗ (ψ0 ) e Re K (ζ, ζ0 ) = , πi ζ1 − ζ10

2 a (ψ0 ) + iγ2 H1 (γ2 r10 ) Im a (ψ0 ) e−iα10 , Im K∗ (ζ, ζ0 ) = π ζ1 − ζ10 a∗ (ψ0 ) = i 1 + h2c cos ψ0 − sin ψ0 . In analogous manner, the total shift stresses on the interface from the side of the inclusion are calculated. Tn+ (ζ0 ) = Tn− (ζ0 ) ,

ζ0 ∈ Γj (j = 1, 2, . . . , M ) ,

Ts+ (ζ0 ) = iμj γ (j) τ sin (ψ0 − β) e

−

ih2cj

−iγ

1 + h2cj sin 2ψ0

(j)

→ 0

⎫ ⎬ q (ζ0 ) , ⎭

→

r ·k

+ μj

⎧ ⎨ ⎩

q(ζ)Kj (ζ, ζ0 ) ds

Γ

1 + h2cj sin2 ψ0 # (j) (j) a∗ (ψ0 ) 2 (j) (j) (j) (j) −iα10 γ × Re a , Re (j) Kj (ζ, ζ0 ) = + γ H r (ψ )e 1 ∗ 0 2 2 10 (j) πi ζ1 − ζ10 (j) a∗ (ψ0 ) = i 1 + h2cj cos ψ0 − sin ψ0 . As an example let us examine the unbounded medium with one elliptical inclusion ξ1 = R1 cos ϕ, ξ2 = R2 sin ϕ, R2 /R1 = 0, 70; 0 ≤ ϕ ≤ 2π. A magneto-elastic wave (10.15) falls along the vertical axis (β = π/2) from inﬁnity. Figs. graphs of the magnitudes the 10.23–10.25 ' ( show Tn = |Tn | Sn0 and TS− = TS− Sn0 , along the inclusion contour, when the values of the parameters (ρ, ρ1 are the densities of the material of the matrix and the inclusion): μ1 /μ = 5, 71; ρ1 /ρ = 0, 83; γ2 (R1 + R2 ) /2 = 0, 9 and hc = 0; 0, 5 and 1, respectively. The representation of the orders of jumps of magnitude Ts on the section border of materials can be obtained from the Table 10.1, in which for the

10.7 Diﬀraction of Shear Magneto-Elastic Wave in the Inclusions

419

hc = 0 Tn 1

T s− 0 –π/2

ϕ

0

Fig. 10.23. Change in the contact stresses, when hs = 0 hc = 0.5 Tn

1

T s− 0 –π/2

ϕ

0

Fig. 10.24. Change in the contact stresses along the inclusion contour, when hc = 0.5

hc = 1 Tn

1

T s− 0 –π/2

0

ϕ

Fig. 10.25. Change in the contact stresses along the inclusion contour, when hc = 1

420

10 Induced Currents

+ 0 0 Table 10.1. Values of quantities T− s /Sn and TS /Sn1 at the points of the contour of the circular inclusion ϕ − 0 Ts /Sn + 0 Ts /Sn1

–1,48

–1,29

–1,09

–0,904

–0,714

–0,524

–0,143

0,028 0,020

0,083 0,051

0,127 0,101

0,155 0,141

0,165 0,179

0,156 0,215

0,114 0,269

ϕ − 0 Ts /Sn + 0 Ts /Sn1

0,048 0,101 0,284

0,238 0,111 0,287

0,428 0,145 0,277

0,809 0,206 0,220

1,190 0,155 0,122

1,380 0,085 0,062

1,57 0,000 0,000

circular inclusion, when hc = 0,5 (remaining are the same as 0 parameters (S 0 = μ1 γ (1) τ ), from above) contains the values |Ts− | Sn0 and |Ts+ | Sn1 n1 the side of the matrix and the inclusion, respectively. When hc = 0, the initial magnetic ﬁeld is absent, so that we get the ordinary problem about the scattering of the SH-wave on the inclusion.

10.8 Fundamental Solution of Two – Dimensional Equations of Magneto-Elasticity for Current-Conducting Medium Let us examine an ideally conducting elastic medium in reference to rectangular Cartesian coordinate system 0x1 x2 x3 , in which acts a harmonically → − changing with time concentrated force with amplitude P = (P1 , P2 ). A con→0 − stant magnetic ﬁeld H = (0, H02 , 0) occupies the entire space. Under mechanical excitation of the medium, as a result of elastic displacements of particles, vortical currents appear in it, which gives rise to the appearance of Lorenz body forces. The consideration of these forces gives the additional tensor of Maxwell stresses, which can exert essential inﬂuence on the wave ﬁelds in the medium. The question of their determination rises, taking into account the inﬂuence of induction currents. We proceed below from the relations for plane deformation (10.9)–(10.11). The complete system of equations for our case takes the form – equation of motion (in amplitudes)

2 (n) 1 (n) n = −P δm δ (x1 ) δ (x2 ) /μ, ∇ Um + σ∗ ∂m θ(n) + γ22 Um 1 + ε H δm (10.51) (n) θ(n) = ∂m Um ,

εH =

h2c

=

γ2 = ω/c2 ,

2 μe H02 /μ

=

∂m = ∂/∂xm (m, n = 1, 2) ,

c2A /c22 , σ∗

= (λ + μ) /μ,

P1 = P2 = P ;

10.8 Fundamental Solution of Two – Dimensional Equations

421

– material equations Sij = σij + tij , σij = λδij θ + μ (∂i Uj + ∂j Ui ) ,

(10.52)

tij = hi B0j + bj H0i − μe δij H0k hk + H0i Boj , → → → θ = ∂k Uk , H = H0 + h = (h1 , H02 + h2 , 0) , → → B = μe H = (b1 , B02 + b2 , 0) ; – expression for the ﬂuctuations of electromagnetic ﬁeld h1 = H02 ∂2 U1 , →

e = (0, 0, e3 ) ,

h2 = −H02 ∂1 U1 ,

h3 = 0,

(10.53)

e3 = iμe ωH02 U1 .

n In formulas (10.51)–(10.53) the magnitude Um is the amplitude of elastic displacement along the axis xm from the force, which acts in the direction xn ; σij , tij are the tensors of elastic and Maxwell stresses in the medium; cA and c2 are the alfven velocity [120] and the velocity of propagation of the transverse wave; hi , bi are the small disturbances of magnetic ﬁeld strength and induction; λ, μ are the Lame constants; μe is the magnetic permeability of substance; ω is the angular frequency; δij is the Kronecker symbol; δ (x) is Dirac’s delta function. The system (10.51) diﬀers from the classical equations of linear elasticity of isotropic body in the factor called the “parameter of magnetic pressure,” εH , which introduces constructive anisotropy in the initial medium. For its integration let us use the Fourier transform on three-dimensional variables [43] 1 V (ξ) = (10.54) U (x) ei(ξ,x) dx, x = (x1 , x2 ) , 2π 1 U (x) = V (ξ) e−i(ξ,x) dξ, ξ = (ξ1, ξ2 ) . 2π

As a result of standard transformations we obtain (n)

P Δm (ξ) (m, n = 1, 2) 2πμΔ(ξ) Δ (ξ) = (1 + σ∗ ) (1 + εH ) Δ0 (ξ) ,

2

Δ0 (ξ) = ξ12 + ξ22 − ξ12 + ξ22 γ12 + γ 2 + ε2 ξ12 + γ12 γ 2 , Vm(n) (ξ) =

2 2 2 Δ(m) m (ξ) = am ξ1 + bm ξ2 − γ2 ,

a1 = 1,

b1 = 1 + σ∗ ,

b2 = 1 + εH ,

γ12 =

(2)

(10.55)

(1)

Δ1 = Δ2 = −σ∗ ξ1 ξ2 ,

a2 = 1 + εH + σ∗ , γ22

1 + σ∗

,

γ2 =

γ22 , 1 + εH

ε2 =

σ∗ εH . (1 + σ∗ ) (1 + εH )

422

10 Induced Currents

By the introduction of polar coordinates x1 = r cos α, x2 = r sin α and ξ1 = ρ cos ϕ, ξ2 = ρ sin ϕ, in (10.55), we can represent the characteristic polynomial Δ0 in the form [280]

(10.56) Δ0 = 1 − ε2 cos2 ϕ ρ2 − γ22 ρ21 ρ2 − γ22 ρ22 Kσ + Kε − d (ϕ) Kσ + Kε + d (ϕ) , ρ22 = , ρ21 = 2 (1 − ε2 cos2 ϕ) 2 (1 − ε2 cos2 ϕ) 2

d (ϕ) = (Kσ − Kε ) + 4ε2 Kσ Kε cos2 ϕ, 1 1 Kσ = , Kε = . σ∗ + 1 εH + 1 Obviously, ρ2m (ϕ) > 0. The meaning of these parameters is that they show, in what sense the initial magnetic ﬁeld changes the velocity of the running longitudinal and transverse monochromatic waves. Thus, if the normal of to the wave front forms an angle β with the axis 0x1 , then the velocity ∗ propagation of these waves is determined by the relations c1 = c2 ρ1 (β) , c∗2 = c2 ρ2 (β). Analyzing the expressions for the transforms (10.55) into elementary fractions and conversing the Fourier transforms, we ﬁnd (by summing over m) Un(n)

P Kσ Kε (x1 , x2 ) = 2π 2 μ

π 0

(n)

Am (ϕ) dϕ × 1 − ε2 cos2 ϕ

∞ 0

ρ cos [ρr cos (α − ϕ)] dρ, ρ2 − γ22 ρ2m (ϕ) (10.57)

Am (ϕ) dϕ × 1 − ε2 cos2 ϕ

∞

ρ cos [ρr cos (α − ϕ)] dρ, ρ2 − γ22 ρ2m (ϕ) 0 0

2 2 2 m ρm (ϕ) an cos ϕ + bn sin ϕ − 1 (n) Am (ϕ) = (−1) , ρ22 (ϕ) − ρ21 (ϕ) 2 m−1 σ∗ ρm (ϕ) sin ϕ cos ϕ Am (ϕ) = (−1) (m, n = 1, 2) . ρ22 (ϕ) − ρ21 (ϕ) (2)

U1 (x1 , x2 ) =

P Kσ Kε 2π 2 μ

π

In order the wave ﬁeld to satisfy the emission conditions, the integrals, which appear in (10.57), must be understood in the following sense [43] appear: ∞ 0

x cos axdx = lim x2 − β 2 − i0 δ→+0

∞ 0

1 −iaβ x cos axdx = E1 (−iaβ) − eiaβ Ei (−iaβ) e 2 2 x + β∗ 2

(10.58) where β∗ = −i β 2 + iδ, δ > 0, a > 0, Reβ∗ > 0; E1 (z) , Ei (z) are the integral exponential functions [22, 109].

10.8 Fundamental Solution of Two – Dimensional Equations

423

Taking into account this remark we obtain formulas for the determination of the wave ﬁelds of displacements [280] (n) Uk

P Kσ Kε (r, α) = − 2μπ 2

π

(n)

Bm,k (ϕ)Φ (θm ) dϕ 0

Φ (x) = cos x ci x + sin x si x −

πi ix e , 2

(n)

Am (ϕ) Am (ϕ) (2) (1) , Bm,1 = Bm,2 = , 1 − ε2 cos2 ϕ 1 − ε2 cos2 ϕ = rγ2 ρm (ϕ) |cos (α − ϕ)| (m, n, k = 1, 2) ,

(n) = Bm,n

θm

(10.59)

where ci x, si x are the integral cosine and sine, respectively [22, 109]. In the classical case, when there is no initial magnetic ﬁeld (εH = 0), the inverse Fourier transform gives # 2 2 i (1) k−1 γk (n) 2H0 (γ1 r) + (−1) Un (r, α) = 8μ (1 + σ∗ ) γ22 k=1 (1) m × H0 (γk r) − (−1) H2 (γk r) cos 2α (n = 1, 2) ,

(2)

U1

(10.60) 2

(1)

= U2 (r, a) =

2 i sin 2α k−1 γk (−1) H2 (γk r), 8μ (1 + σ∗ ) γ22 k=1

4i (1) H2 (x) = + H2 (x). πx2 (1)

Here Hm (x) is the Hankel function of the ﬁrst kind with order m [22]. The stresses in the medium can be found by the use of the relations (10.52), (10.53). We get σ11 + σ22 = 2μσ∗ ∂k Uk ,

σ22 − σ11 ± 2iσ12 = −2μ (∂1 ∓ i∂2 ) (U1 ∓ iU2 ) . (10.61) The corresponding combinations of stresses of electromagnetic origin have form t11 + t22 = 0,

t22 − t11 ± 2it12 = −2μεH (∂1 ∓ i∂2 ) U1 .

(10.62)

On the basis of these relations and deﬁnitions for the matrix of fundamental solutions (10.59), we ﬁnd the componentsof the tensors of complete voltages.

424

10 Induced Currents

We get 2 2 P σ∗ Kσ Kε (n) = cm,k (ϕ, r, α)nk dϕ π2 m=1 π

(n) S11

+

(n) S22

k=1 0

(n) S22

−

(n) S11

±

(n) 2iS12

(10.63)

2 2 P Kσ Kε (n) =− β cm,k (ϕ, r, α)e∓iϕ dϕ, k π2 m=1 π

k=1

0

(n = 1, 2) ,

1 (ϕ, r, α) = × Ψ∗ (θm ) + sign cos (α − ϕ) , θm π Ψ∗ (x) = cos x si x − sin x ci x + eix , 2 n1 = cos ϕ, n2 = sin ϕ, β1 = 1 + εH , β2 = ∓i. (n) Cm,k

(n) γ2 Bm,k (ϕ)ρm (ϕ)

The right sides in (10.63) contain the singular terms, which determine the singularity at the point of application of the concentrated functional. These terms represent the corresponding static problem of magneto-elasticity, the solution of which can be obtained in closed form. Transforming the coeﬃcients, −1 on m and k, and then carrying out the necessary quadratures, when θm we ﬁnd √ cos α P σ∗ 1 − ε2 (1) (1)

+ P γ2 R1 (r, α), (10.64) S11 + S22 = · π (1 + σ∗ + εH ) r 1 − ε2 sin2 α √ sin α P σ∗ 1 − ε2 (2) (2)

+ P γ2 R2 (r, α), · S11 + S22 = π (1 + σ∗ ) r 1 − ε2 sin2 α P (1) (1) (1) {λ11 (α, εH ) cos α ± iλ11 (α, εH ) sin α} S22 − S11 ± 2iS12 = πr ± − γ2 P R1 (r, α) , P (2) (2) (2) {±iλ21 (α, εH ) cos α + λ22 (α, εH ) sin α} S22 − S11 ± 2iS12 = πr − γ2 P R2± (r, α) , 2 2 π σ∗ Kσ Kε (n) Bm,k (ϕ)Ψ∗ (θm ) ρm (ϕ) Rn (r, α) = π2 m=1 k=1 0

× nk sign cos (α − ϕ) dϕ, 2 2 Kσ Kε (n) = β Bm,k (ϕ)Ψ∗ (θm ) ρm (ϕ) k π 2 m=1 π

Rn± (r, α)

k=1

∓iϕ

0

sign cos (α − ϕ) dϕ, 2 + εH 1 + εH λ11 (α, εH ) = λ0 − (λ0 + 1) , εH 1 + σ∗ + εH ×e

10.9 Diﬀraction of Magneto-Elastic Waves

425

√ 1 − ε2 2 + εH

+ λ22 (α, εH ) = λ0 , 2 2 εH (1 + σ∗ ) 1 − ε sin α εH − 2λ0 2λ0 λ12 (α, εH ) = , λ21 = + 2λ0 + 1, εH εH √ 1 − ε2 λ0 = − 1. 1 − ε2 sin2 α When γ2 = 0, we hence obtain the solution of the static magneto-elasticity problem for the action of concentrated force in elastic conducting medium under an initial magnetic ﬁeld. Obviously, for the determination of mechanical stresses in the static case it is suﬃcient to take the second combination Sij , but with the upper sign. For the explanation of the inﬂuence of induction currents on the dynamic (n) (n) intensity of the medium, we calculate the complete voltages S11 , S22 , under the action of concentrated force P = 1 along or across the initial magnetic ﬁeld. The results are represented in the Table 10.2 (for value of wave number γ2 = 0, 5). It is evident that the initial magnetic ﬁeld exerts inﬂuence the on (1) (2) amplitudes of stresses close to the harmonic source. Moreover, S11 , S11 (1) (2) decrease, whereas, S22 , S22 grow with increase of the parameter of magnetic pressure εH . The strongest inﬂuence of the initial magnetic ﬁeld is manifested in the immediate proximity of the source. A more distant ﬁeld of displacements is investigated in [262]. Table 10.2. Amplitude values of complete voltages in a medium with harmonic source (1)

(2)

(1)

|S11 |/|S11 | εH 0 0.5 1

(2)

|S22 |/|S22 |

r = 0, 1

r = 0, 5

r=1

r = 0, 1

r = 0, 5

r=1

2, 73 0, 46 2, 40 0, 38 2, 23 0, 33

0, 56 0, 10 0, 49 0, 08 0, 45 0, 07

0, 30 0, 06 0, 25 0, 05 0, 23 0, 04

2, 73 0, 46 2, 99 0, 67 3, 17 0, 81

0, 56 0, 10 0, 61 0, 14 0, 65 0, 17

0, 30 0, 06 0, 32 0, 08 0, 34 0, 09

10.9 Diﬀraction of Magneto-Elastic Waves on the Opening in a Magnetic Field 10.9.1 Statement of Boundary-Value Problem. Integral Representations of the Solutions (n)

The matrix of the fundamental solutions Um obtained above can be used for the study of the dynamic intensity of conductors with stress concentrators in magnetic ﬁelds.

426

10 Induced Currents

Let us consider an unbounded ideally conducting elastic medium in reference to the rectilinear Cartesian axes 0x1 x2 x3 , weakened by a tunnel cavity along the x3 – axis, whose cross section is limited by a simple, closed and suﬃciently smooth contour Γ. The medium is placed in a uniform magnetic ﬁeld described by vector H 0 = {0, H0 , 0}. On the surface of cavity normal N exp (−iωt) and tangential T exp (−iωt) forces act. It is evident that the forces are harmonically changing with time and independent from the coordinate x3 . There is also a possibility that a plane monochromatic magnetoelastic wave is radiated from inﬁnity. Under these conditions the stationary wave process, which corresponds to plane deformation of the medium, takes place. The appearance of ﬂuctuations of electrical and magnetic ﬁelds → − → − e = {0, 0, e3 } and h = {h1 , h2 , 0}, in the conductor, as well as components of the vector of elastic displacements ui and the tensors of mechanical and Maxwell stresses σij , tij are described, in linear approximation, by relations (10.51)–(10.53), when P = 0. Since the ﬂuctuations of the electromagnetic ﬁeld are determined through the elastic displacements, the fundamental boundary-value problem is reduced to integration of the equation of motions (in amplitudes)

2 1 ∇ Um + σ∗ ∂m θ + γ22 Um = 0 (m = 1, 2) . (10.65) 1 + ε H δm In this case, it is necessary to satisfy the boundary conditions on Γ: σkj nj = Xk

(k, j = 1, 2) .

(10.66)

Here, it is considered that the magnetic permeabilities of many magnetic materials coincide with the magnetic permeability of the vacuum; therefore the magnetic ﬁeld before the deformation and in the process of deformation can be continuously extended into the cavity of the opening. For the solution of the boundary problem (10.65), (10.66), we write the sought-for wave ﬁeld of displacements in the ordinary form 0 ∗ Um (x1 , x2 ) = Um + Um

(10.67)

where u0m , u∗m are the displacements in the falling and scattered heterogeneity waves, respectively. The scattered wave ﬁeld can be represented in the form ∗ (x1 , x2 ) = Um

2

ωn (ζ)u(n) m (r, α)ds (m = 1, 2) ,

(10.68)

n=1 Γ

where r = |ζ − z| ,

α = arg (ζ − z) , z = x1 + ix2 , ζ = ξ1 + iξ2 ∈ Γ,

10.9 Diﬀraction of Magneto-Elastic Waves

427

ωn (ζ) are the searched-for functions on the contour Γ, ds is the element of length of arc Γ. The representations (10.68) are correct in the sense that the displacements, determined by them, satisfy the equation of motion (10.65) and the conditions for emission, independently from the choice of densities ωn (ζ). The combinations of the complete voltages amplitudes due to the scattered by heterogeneity ﬁeld are determined by formulas (10.52). Performing the operations speciﬁed there and taking into account the relations (10.59), (10.61) and (10.62), we ﬁnd S11 + S22 =

2 σ∗ Kσ Kε γ ωn (ζ)hn (ζ, z)ds, 2 π2 n=1

(10.69)

L

S22 − S11 ± 2iS12

hn (ζ, z) =

2

2 Kσ Kε =− γ2 ωn (ζ)h± n (ζ, z)ds, π2 n=1

2 π

L

(n) nm Fp,m (ζ, z; ϕ) dϕ,

m=1 p=1 0

h± n (ζ, z)

=

2 2 m=1 p=1

± βm

π

β1± = 1 + εH ,

(n) e±iϕ Fp,m (ζ, z; ϕ) dϕ,

β2± = ±i,

n1 = cos ϕ,

n2 = sin ϕ,

0

(n) (n) Fp,m (ζ, z; ϕ) = Bp,m Ψ (θp ) ρp (ϕ)sign [cos (α − ϕ)] , 1 Sij = σij + tij , Ψ (x) = + Ψ∗ (x), x π Ψ∗ (x) = cos x si x − sin x ci x − eix , 2 (2) (1) (n) (n) Bp,n = C(ϕ)Ap (ϕ), Bp,1 = Bp,2 = C(ϕ)Ap (ϕ),

−1 C(ϕ) = 1 − ε2 n21 .

The combinations of stresses of mechanical origin σij are calculated by the same formulas; it is necessary only to put εH = 0 in the expression for the coeﬃcient β1± . Obviously, the knowledge of three combinations of stresses in (10.69) makes possible to determine all the components of stress tensors Sij and σij . An important point for our future analysis is the explicit distinction of the singular parts of kernels hn and h± n , connected with the occurrence of the term x−1 in the expression for the function Ψ (x). Transforming m and p the coeﬃcients when r−1 in these kernels, we calculate 2 2 m=1 p=1

(1) Bp,m nm = n1 C(ϕ),

(10.70)

428

10 Induced Currents

2 2

(2) Bp,m nm = (1 + εH )n2 C(ϕ),

m=1 p=1 2 2

± (1) βm Bp,m = (1 + εH ) 1 + σ∗ n22 ± iσ∗ n1 n2 e±iϕ C(ϕ),

m=1 p=1 2 2

± (2) βm Bp,m = − (1 + εH ) σ∗ n1 n2 ± i 1 + εH + σ∗ n21 × e±iϕ C(ϕ).

m=1 p=1

Now the combinations of complete voltages (10.69) can be presented in the form (summation over n) In (α) σ∗ Kσ Kε + γ2 Hn (ζ, z) ds, ωn (ζ) (10.71) S11 + S22 = π2 r L ± In (α) Kσ Kε ± + γ2 Hn (ζ, z) ds, S22 − S11 ± 2iS12 = − ωn (ζ) π2 r L

where π I1 (α) = 0

π 0

I3± (α)

I2 (α) = (1 + εH )

n2 dϕ , (1 − ε2 n21 ) cos (α − ϕ)

π

= 0

I4± (α)

n1 dϕ , (1 − ε2 n21 ) cos (α − ϕ)

(1 + εH ) 1 + σ∗ n22 ± iσ∗ n1 n2 ±iϕ e dϕ, (1 − ε2 n21 ) cos (α − ϕ) π

=− 0

(1 + εH ) σ∗ n1 n2 ± i 1 + εH + σ∗ n21 ±iϕ e dϕ. (1 − ε2 n21 ) cos (α − ϕ)

Kernels Hn and Hn± , that appear in (10.71), are determined by formulas (10.71) for hn and h± n , respectively, in which it is necessary to replace functions Ψ (θp ) with Ψ∗ (θp ). The integrals In and In± should be understood in the sense of principal value according to Cauchy. After the cumbersome procedure of their calculation, we come to the following result. Let z = x1 + ix2 , ζ = ξ1 + iξ2 ∈ Γ; we introduce the mapping x1 z1 = √ + ix2 , 1 − ε2

ξ1 ζ1 = √ + iξ2 , 1 − ε2

ζ − z = reiα ,

ζ1 − z1 = r1 eiα1 . (10.72)

10.9 Diﬀraction of Magneto-Elastic Waves

429

Then the following representations hold σ∗ Kσ Kε S11 + S22 = ωn (ζ)gn (ζ, z)ds + σ∗ γ2 ωn (ζ)Hn (ζ, z)ds, π π2 Γ

S22 − S11 ± 2iS12 =

Γ

1 π

Γ

ωn (ζ)gn± (ζ, z)ds −

(10.73) ωn (ζ)Hn± (ζ, z)ds,

Γ

sin α1 1 √ g1 (ζ, z) = g2 (ζ, z) = , 2 1 + σ∗ + εH (1 + σ∗ ) 1 − ε r1 e±iα cos α1 sin α1 + e2n + e3n (n = 1, 2) , gn± (ζ, z) = e1n r r1 r1 2 + εH 2 + εH 1 + εH e11 = − , e21 = − , εH εH 1 + εH + σ∗ 2i 2 + εH e31 = ± √ , e12 = ±i , 2 εH εH 1 − ε 2 + εH 1 + εH 1 1 e22 = ±2i , e32 = √ + , εH εH 1 + σ∗ 1 − ε2 1

cos α1 , r1

Kσ Kε γ2 π2

∗ , the formula (10.73) remain also valid, if it is assumed For the stresses σij (all the remaining magnitudes do not change):

2 1 2i 2 + εH − , e12 = ± , e22 = ±i , εH 1 + εH + σ∗ εH εH 2 1 2 + εH 1 √ √ = ±i , e32 = + , β1± = 1. εH 1 + σ∗ εH (1 + εH ) 1 − ε2 1 − ε2 (10.74)

e11 = − e31

2 , εH

e21 =

Kernels gn , gn± (n = 1, 2) in (10.73) are linear combinations of Cauchy kernels and complex-conjugated kernels of them in the physical and transformed planes, the kernels Hn and Hn± are regular. Thus, the limiting values of tensors Sij and σij on Γ are calculated in an elementary way by applying the formulas for the computation of the limiting values of Cauchy-type integrals [50, 103]. It is noteworthy that the “unlimited increase” of the functions gn± whenever εH → 0 (absence of initial magnetic ﬁeld) is only apparent. In fact, they have ﬁnite limits. One can be easily convinced, if he considers the connections between the corresponding values in the physical and transformed planes

1 − ε2 sin2 α cos α1 1 − ε2 sin2 α sin α1 cos α sin α √ = =− , . r r (1 − ε2 ) r1 r1 1 − ε2 Let us examine now the structure of plane magneto-elastic waves in isotropic ideally conductingmedium in a magnetic ﬁeld. Seeking for the

430

10 Induced Currents

0 solutions of the (10.65) in the form Um = Am exp {iγ (x1 cos β + x2 sin β)}, we come to the homogeneous system of equations

(10.75) A1 γ22 − γ 2 1 + εH + σ∗ cos2 β − A2 γ 2 σ∗ sin β cos β = 0, 2

2 2 2 − A1 γ σ∗ sin β cos β + A2 γ2 − γ 1 + σ∗ sin β = 0,

the determinant of which is

Δ = (1 + εH ) (1 + σ∗ ) 1 − ε2 cos2 β × γ 2 − γ22 ρ21 (β) γ 2 − γ22 ρ22 (β) . Hence we deduce that only waves with wave numbers γ (n) = γ2 ρn (β) and velocities Cn∗ = C2 /ρn ( β) (n = 1, 2) may propagate within the medium. Along the coordinate axes these waves can be propagated in the form of purely longitudinal and purely transverse waves. Along the axis x1 : γ2 γ1 =√ , U10 = U0 exp ±iγ (1) x1 , U20 = 0, γ (1) = √ 1 + εH + σ∗ 1 + εH K σ U20 = U0 exp ±iγ (2) x1 , U10 = 0, γ (2) = γ2 . Along the axis x2 :

U20 = U0 exp ±iγ (1) x2 , U10 = U0 exp ±iγ (2) x2 ,

U10 = 0,

γ (1) = γ1 ,

U20 = 0,

γ2 γ (2) = √ . 1 + εH

Moreover, in both cases when polarizing along the lines of the initial magnetic ﬁeld the velocities of longitudinal and transverse waves coincide with the classical ones. When polarizing normal to the magnetic ﬁeld √ C1∗ /C1 = 1 + εH Kσ ≥ 1, C2∗ /C2 = 1 + εH ≥ 1. In the general case, the orientation of the wave vector for a wave of the ﬁrst type (quasi-longitudinal wave), generates transverse polarization, and the wave of second type (quasi-transverse) generates longitudinal polarization in the plane 0x1 x2 . We have, respectively U10 = U0 W1 , where

U20 = U0 C (1) W1 ,

U10 = U0 W2 ,

U20 = U0 C (2) W2 ,

Wm = exp iγ (m) (x1 cos β + x2 sin β) , C (m) =

σ∗ ρ2m (β) sin β cos β

, sin β cos β = 0. 1 − ρ2m (β) 1 + σ∗ sin2 β

10.9 Diﬀraction of Magneto-Elastic Waves

431

In view of what is discussed above, the waves from inﬁnity, as well as the stresses connected with them can be represented in the form 0 Um =

2

λmn Wn

(m = 1, 2) ,

(10.76)

n=1 0 0 + S22 = 2μiσ∗ S11

2 2

λmn γ (n) Wn n∗m ,

n=1 m=1 0 0 0 − S11 ± 2iS12 = −2iμe±iβ S22

2 2

± λmn γ (n) Wn βm ,

n=1 m=1

where λmn are the amplitudes of displacements along the coordinate xm in the wave of n-th type n∗1 = cos β, n∗2 = sin β. 0 The amplitudes of stresses σij are determined by the same formulas; it is ± only suﬃcient to assume that β1 = 1. 10.9.2 Integral Equations of the Boundary Value Problem The boundary conditions on the contour of the opening can be represented in the form of two complex boundary equalities σ11 + σ22 − e±2iψ (σ22 − σ11 ± 2iσ12 ) = 2 (N ± iT ) , σij =

0 σij

+

(10.77)

∗ σij ,

where ψ is the angle between the normal to the contour of the opening and 0 ∗ the axis 0x1 ; σij and σij are stresses in the incident and scattered waves, respectively. Substituting the limiting values of the corresponding combinations (10.73) in (10.77), and taking into account relations (10.76), we reduce the boundaryvalue problem to a system of singular integral equations of second order, relatively to the functions ω1 (ζ), ω2 (ζ), (summation over the repetitive indices): 1 a± (ψ )ω (ζ ) + ωn (ζ)Dn± (ζ, ζ0 )ds = F ± (ζ0 ), ζ0 ∈ Γ, (10.78) 0 m 0 m π Γ

where

±i 1 − ε2 cos ψ0 − sin ψ0 e±iψ0 ± , a2 (ψ0 ) = =− , (1 + εH ) (1 − ε2 cos2 ψ0 ) 1 − ε2 cos2 ψ0 Kσ Kε ± θn (ζ, ζ0 ), b± Dn± (ζ, ζ0 ) = Λ± n (ζ, ζ0 ) + 1 = 1, π ±2iψ0 ± gn (ζ, ζ0 ) , Λ± n = σ∗ gn (ζ, ζ0 ) − e

a± 1 (ψ0 )

b± 2 = ∓i, ±

θn± = σ∗ Hn (ζ, ζ0 ) + e±2iψ0 Hn± (ζ, ζ0 ),

F (ζ0 ) = 2 (N ∓ iT ) − 2iμ

2 2 m=1 n=1

λmn γ (n)

±i(2ψ0 −β) Wn (ζ0 ). × σ∗ n∗m + b± me

432

10 Induced Currents

± While kernels Λ± n are singular, the kernels θn can possess not more than a weak singularity (on assumption that the curvature of contour Γ satisﬁes Holder condition); when determining functions gn and gn± , one should use the formulas (10.73) with coeﬃcients emn from (10.74).

10.9.3 Dynamic Intensity of Conductor in the Opening The tangential normal stress σψψ on the contour of the opening is determined by relation (10.79) σψψ = σ11 + σ22 − N. Making use of the limiting values of the ﬁrst combination of stresses from (10.71) and taking into account the formulas (10.76), we ﬁnd σ∗ Kσ {Kε ω1 (ζ0 ) cos ψ0 +ω2 (ζ0 ) sin ψ0 } 1 − ε2 cos2 ψ0 n σ∗ + ωm (ζ) × π m=1 Γ Kσ Kε γ2 Hm (ζ, ζ0 ) ds + 2iμσ∗ × gm (ζ, ζ0 ) + π

σψψ (ζ0 ) = −

×

2 2

λmn γ (n) n∗m Wn (ζ0 ) − N,

ζ0 ∈ Γ.

n=1 m=1

The complete voltage on Γ is determined by the equality 1 1 Sψψ = (S11 + S22 ) + e2iψ0 (S22 − S11 + 2iS12 ) 2 4 1 −2iψ0 + e (S22 − S11 − 2iS12 ) , 4 where the corresponding combinations of stresses are determined in (10.73) and (10.76). For the numerical solution of the constructed algorithm we make parameterization of the contour of the opening Γ : ζ = ζ (β) , ζ0 = ζ (β0 ) , 0 ≤ β, β0 ≤ 2π. Applying the method of mechanical quadratures [24] to (10.78) and taking into account the interpolation formula (for the odd N) n

f (β0l ) =

1 βi − β0l , (−1)i+l f (βi ) cosec n i=1 2

10.9 Diﬀraction of Magneto-Elastic Waves

433

we reduce them to linear algebraic system of the form n βi − β0l i+l ± + 2Dm ωm (βi ) a± cos ec (βi , β0l ) s (βi ) m (β0l ) (−1) 2 i=1 = nF ± (β0l ) , βi =

π (2i − 1) , n

β0l =

2π (l − 1) n

(i, l = 1, 2, . . . , n) .

As an example, let us examine the elastic current-conducting medium, weakened by a circular opening of radius R, on the surface of which harmonically changing with time normal pressure is given, N exp (−iωt). Figs. 10.26 and 10.27 show a change of the relative contour stress K = |Sψψ /N | at the points of contour A and B as a function of the normalized wave number γ1 R. The curves 1, 2, 3 are constructed for the values of the parameter of magnetic pressure εH = 0; 0, 5 and 1, respectively. The continuous lines correspond to the value of Poisson coeﬃcient ν = 0, 15, the stroked ones, to the value ν = 0, 45.

Let us now consider a longitudinal wave u01 = u0 exp −iγ (1) x1 , u02 = 0, √ γ (1) = γ2 / 1 + σ∗ + εH that falls from inﬁnity, along x1 -axis, on the elliptical opening x1 = R1 cos β, x2 = R2 sin β, (0 ≤ β ≤ 2π). The√results of the calculations of the magnitude K = |Sψψ /S|, where S = μγ2 u0 1 + σ∗ + εH , as a function of relative wave number γ1 r1 (2r1 = R1 + R2 ) are presented in Figs. 10.28 and 10.29 for the circular (R1 = R2 = R) and in Figs. 10.30 and 10.31 for the elliptical openings (R2 /R1 = 0, 67). Here and below, the continual curves correspond to the value ν = 0, 15, and the stroked ones, to the value ν = 0, 4. kA B A

3 3 2

2

1

1

1.30

0.50 0.0

1.0

γ1R

Fig. 10.26. Dependences of relative contour stress on the normalized wave number for the case, when pulsatory pressure acts on the contour of circular opening

434

10 Induced Currents kB 3

3

2

2

1.30 1

1

0.50 0.0

γ1R

1.0

Fig. 10.27. Graphs of contour normal stress at the point B kA

B

2

3

C

A D

1.90 1 1 2 3

0.00 0.0

1.5

γ1r1

Fig. 10.28. Diﬀraction of longitudinal magneto-elastic wave on circular opening. Curves of relative normal stress at point A kB

2 3 1

2 1

3

1.75

0.10 0.0

1.5

γ1r1

Fig. 10.29. Curves of relative normal stress at the point B on circular opening

10.9 Diﬀraction of Magneto-Elastic Waves kA

435

B

2 3

C

A D

1

2.50

1 2

0.10

3

0.0

1.5

γ1r1

Fig. 10.30. Diﬀraction of longitudinal magneto-elastic wave on elliptical opening

kB

3

2 3

1

2

1

1.30

0.10 0.0

1.5

γ1r1

Fig. 10.31. Diﬀraction of longitudinal wave on elliptical opening. Curves correspond to the point B of the contour of elliptical opening

The situation, when a transverse wave u02 = u0 exp −iγ (2) x1 , u01 = 0, γ (2) = γ2 falls on the circular or elliptical opening along the axis x1 is presented in Figs. 10.32 and 10.33. Here, the graphs of the magnitude K = |Sψψ /S|, where S = μγ2 u0 are plotted.

Analogous curves for the case, when longitudinal u02 = u0 exp −iγ (1) x2 ,

(1) 0 (2) 0 (2) u01 = √ 0, γ = γ1 or transverse wave u1 = u0 exp −iγ x2 , u2 = 0, γ = γ2 / 1 + εH falls on the opening along the axis x2 , are presented in Figs. 10.34, 10.35, 10.36 and 10.37, respectively. When exciting with√the aid of longitudinal wave the magnitude S has the √ next value S = μγ2 u0 1 + σ∗ , while for the transverse wave it is S = μγ2 u0 1 + εH .

436

10 Induced Currents kB

B A C

3 D

3

2

3.00 2 1

1

0.00 0.0

γ1r1

1.5

Fig. 10.32. Diﬀraction of transverse magneto-elastic wave on circular opening kB

C

B

A 3

D

3 2

2

2.85

1 1

0.00 0.0

γ 1r 1

1.5

Fig. 10.33. Diﬀraction of transverse wave on elliptical opening kB

3 2

B

3

C

A D

1

2

0.68 1

0.00 0.0

1.5

γ1r1

Fig. 10.34. Diﬀraction of longitudinal magnetoelastic wave on circular opening

10.9 Diﬀraction of Magneto-Elastic Waves kB

437

B 3

A

C D

2

1

0.80 1 2

3

0.00 0.0

γ1r1

1.5

Fig. 10.35. Diﬀraction of longitudinal wave on elliptical opening kA

B C

A

1

D

1.75 1

2 2

3

3

0.00 0.0

γ1r1

1.5

Fig. 10.36. Diﬀraction of transverse magneto-elastic wave on circular opening kA

B A

C

1

D 1 1.70

2

2 3 3

0.00 0.0

1.8

γ1r1

Fig. 10.37. Diﬀraction of transverse magneto-elastic wave on elliptical opening

438

10 Induced Currents K

3 2 1

1.6

γ1r1 = 0.01 0.0

π

0.0

ϕ

Fig. 10.38. Change in relative normal stress along the contour of circular opening for small normalized wave number K 3

0.8 1

γ1r1 = 1.0 2

0.0

π

ϕ

Fig. 10.39. Nature of redistribution of normal stress on the contour of circular opening with relatively great value of normalized wave number K 2 3

0.8

1

γ1r1 = 2.0 0.0

π

ϕ

Fig. 10.40. Change in normal stress along the contour of circular opening

10.9 Diﬀraction of Magneto-Elastic Waves

439

K 3 2

1

2.5

0.0

γ1r1 = 0.01 π

ϕ

Fig. 10.41. Change in relative normal stress on the contour of circular opening for the case of transverse wave K

γ1r1 = 1.0

3 2

1

1.1

0.0

π

ϕ

Fig. 10.42. Nature of redistribution of relative normal stress with great values of normalized wave number K

γ1r1 = 2.0

0.9

3 2 1

0.0 0.0

π

ϕ

Fig. 10.43. Nature of redistribution of relative normal stress on the contour of circular opening when a transverse wave drops from the inﬁnity

440

10 Induced Currents

If the normalized wave number γ1 r1 is small, then the initial magnetic ﬁeld weakly redistributes the magnitude K on the contour of the opening. Only its extreme values change (Figs. 10.38). When increasing the wave number, essential redistribution of the contour stress occurs (Figs. 10.39 and 10.40). This observation is especially related to the situation, when on the opening falls a transverse wave (Figs. 10.41–10.43).

11 Influence of Magnetizability of Material on the Stress State of a Ferromagnetic Medium with Heterogeneities

In this chapter some static problems of magneto-elasticity are examined for soft-iron unbounded medium, weakened by cracks or openings. For such materials, like iron-nickel alloys, transformer iron, etc., which possess small remnant magnetism (narrow loop of hysteresis), the inﬂuence of induced currents is small in comparison with the eﬀect of magnetization. The linear theory [285, 286] is used below, which disregard hysteresis losses and the eﬀect of magneto-elasticity. The inﬂuence of the material magnetizability on the intensity of an unbounded soft-iron ferromagnetic medium with rectilinear cracks under strong static magnetic ﬁeld is studied in the papers [140, 286]. We elaborate below new procedures, which enable examination of bodies with defects of suﬃciently arbitrary conﬁguration.

11.1 Initial Relations of Linear Magneto-Elasticity of Ferromagnetic Materials. Complex Representations of the Solutions Let us examine a body of soft-iron ferromagnetic material in reference to a rectangular Cartesian coordinate system 0x1 x2 x3 , weakened by tunnel heterogeneities along the x3 - axis. Let us assume that the initial magnetic ﬁeld (into which the ferromagnetic body is placed) is uniform throughout the space and oriented along the axis x2 . As a result of the magnetization of the material, the body acquires magnetic moment and undergoes mechanical action from the side of the external ﬁeld. Furthermore, we consider that on the surfaces of heterogeneities the action of mechanical load (X1n , X2n , 0), where Xin = Xin (x1 , x2 ) is possible. Under the inﬂuence of all these forces in the body appear deformations, which cause an additional (induced) magnetic ﬁeld. A question arises about the determination of the interacting mechanical and magnetic ﬁelds in the piecewise-uniform ferromagnetic body.

442

11 Inﬂuence of Magnetizability

As a result of the deformation of the body, the initial magnetic ﬁeld undergoes small changes. We will assume that the cause of deformation is a ﬁeld → of inﬁnitesimal displacement vector − u = (u1 , u2 , u3 ) → − − → → − B = B0 + b ,

→ − − → → − H = H0 + h ,

− → − → → M = M0 + − m,

(11.1)

→ − → − − → where B 0 = (B01 , B02 , B03 ) ; H 0 = (H01 , H02 , H03 ) , M 0 = (M01 , M02 , M03 ) are, respectively, the induction, the intensity of magnetic ﬁeld and magneti→ − − → → zation in the state of rigid (non-deformated) body, and b , h , − m are the ﬂuctuations of the indicated magnitudes, which have by hypothesis the same order of magnitude as the vector of elastic displacement. Then, on the condition that (M0j ∂j ui (<< (mi ( , the following system of linear relations [122, 285, 286] holds: ﬁeld equations (summation over the repetitive index) ∂j tji + μ0 (M0j ∂j H0i + M0j ∂j hi + mj ∂j H0i ) = 0, → − → − rot h = 0, div b = 0 (i, j = 1, 2, 3) ,

(11.2)

material equations → − − → → → − → − − → m = χ h , b = μ0 ( h + − m) = μ0 μr h ,

μr = χ + 1,

(11.3)

tij = σij + χμ0 (H0i H0j + H0i hj + H0j hi ) , Tij = H0j B0i + H0j bi + B0i hj − 1 − μ0 (H0k H0k ) δij − μ0 (H0k hk ) δij , 2 σij = λδij ∂k uk + μ (∂j ui + ∂i uj ) ; boundary conditions on the surface of section of the media: e Sij − Sij nj = 0, Sij = tij + Tij (i, j = 1, 2, 3) , εijk {nj (hk − ni (bi −

bei )

hek )

− (H0k −

− (B0i −

e H0k ) nm ∂j um }

e B0i ) nm ∂i um

(11.4)

= 0,

= 0.

In the relations (11.2)–(11.4), σij , tij and Tij are the tensors of elastic, magneto-elastic and Maxwell stresses, respectively; εijk is the Levi-Civita tensor; index “e” refers to the medium (here, to the cavity of crack or opening); ni is the projection of the unit vector of the normal to the surface of section 2 to the axis xi ; μ0 = 4π · 10−7 N/A is the absolute magnetic permeability; μr is the relative magnetic permeability; χ is the magnetic susceptibility of substance; λ, μ are the Lame constants. In these relations, there are components of undisturbed magnetic ﬁeld, which are determined from the solution of the problem of magneto-statics for coupled media (one of which is usually the vacuum):

11.1 Initial Relations of Linear Magneto-Elasticity

443

in the body → − → − rot H 0 = 0, div B 0 = 0, − − → → → − → − B 0 = μ0 H 0 + M 0 = μ0 μr H 0 ;

(11.5)

in the cavity → − → − rot H e0 = 0, div B e0 = 0, →e − → − B 0 = μ0 H e0 .

(11.6)

Coupling conditions of ﬁelds in the body and the cavity of concentrator take the ordinary form [161, 167] e e εij nj (H0k − H0k =0 (11.7) ) = 0, nj B0j − B0j (i, j, k = 1, 2, 3) . The system of (11.2)–(11.7) is complete, in the sense that it provides the possibility, in principle, to determine all mechanical and magnetic magnitudes in the body, as well as the magnetic ﬁeld in the medium. For the determination of ﬁelds of elastic displacements and the ﬂuctuations of the magnetic ﬁeld, we use the relations (11.2), (11.3) and the fact that the magnitudes tij , Tij , hi do not depend on the coordinate x3 . We have [288, 135, 140]: diﬀerential equations of equilibrium of soft-iron elastic medium ∇2 ui + σ∗ ∂i θ + 2χμ0 μ−1 H02 ∂2 hi = 0

(i = 1, 2)

(11.8)

the equations of magneto-statics for the ﬂuctuations of magnetic ﬁeld − → h = gradΨ,

∇2 Ψ = 0.

(11.9)

In the formulas (11.8), the magnitude θ = ∂m um ; σ∗ = (λ + μ) /μ = = −1 (1−2ν) ; ν; is the Poisson ratio. From (11.8), (11.9) immediately follows, that the volume expansion θ is harmonic function. Accordingly, let us assume that μθ = (κ − 1) ReΦ (z) , κ = 3 − 4ν,

Ψ = Re {if (z)} ,

(11.10)

where Φ (z) , f (z) are arbitrary analytical in the domain, occupied by the body, functions of complex variable z = x1 + ix2 . If we write (11.8) in the form of one complex equation in relation to u1 + iu2 and we integrate it, in accordance to the determination of volume

444

11 Inﬂuence of Magnetizability

expansion (11.10), we ﬁnd

2μ (u1 + iu2 ) = κϕ (z) − zΦ (z) − ϕ1 (z) + μ0 M02 zF (z) − f (z) , (11.11)

Φ (z) = dϕ (z) /dz = ϕ (z) ,

F (z) = f (z) .

Hence, taking into account formulas (11.10), we obtain 2 , t11 + t22 = 4ReΦ (z) − 2μ0 M02 ReF (z) + χμ0 H02

z W (z) + W1 (z)} + t22 − t11 + 2it12 = 2 {¯

(11.12)

2 χμ0 H02 ,

2 S11 + S22 = 4ReW (z) + 2χμ0 H02 ,

S22 − S11 + 2iS12 = 2 {¯ z W (z) + W1 (z)} − 2 , − 2B02 F (z) + (2χ + 1) μ0 H02 h1 − ih2 = iF (z) ,

W (z) = Φ (z) − μ0 M02 F (z) , W1 (z) = Φ1 (z) − μ0 M02 F (z) , Φ1 (z) = ϕ1 (z) . Thus, the components of the tensor of magneto-elastic and Maxwell stresses, as well as the vectors of mechanical displacement and the ﬂuctuations of intensity of magnetic ﬁeld in the body are expressed in terms of three arbitrary analytic functions. When B02 = 0, formulas (11.12) and (11.11) coincide with the classical representations of the two-dimensional problem of the theory of elasticity.

11.2 Ferromagnetic Medium, Weakened by the Tunnel Cracks Let us consider here the situation, when the unbounded soft-iron ferromag→ − netic elastic medium, placed into constant magnetic ﬁeld B 0 = (0, B02 , 0), is weakened by tunnel cracks Lj (j = 1, 2, . . . , M ). along the axis x3 . We con→ − sider that the magnetic ﬁeld B 0 is not sensitive to cracks, since the later in the non-deformed state are treated as mathematical cuts. Accordingly, on the axis of the cuts we have (Fig. 11.1) e e = χH02 n1 n2 , H02 = H02 1 + χn22 , H01 (11.13) where n1 = cos ψ; n2 = sin ψ; ψ is the angle between the normal to Lj and the axis 0x1 . The boundary conditions follow from the conditions for coupling (11.4). We get, taking into account (11.13) (11.14) n1 (b1 − be1 ) + n2 (b2 − be2 ) = μ0 χH02 n1 U1∗ ,

− n2 (h1 − he1 ) + n1 (h2 − he2 ) = χH02 n2 U1∗ , ∂ ∂um , = n1 ∂2 − n2 ∂1 , U1∗ = nm ∂s ∂s

(11.14)

11.2 Ferromagnetic Medium, Weakened by the Tunnel Cracks

445

x2 L1

→

0

n

Lj

bj

x1

ψ

+

–

aj →

B0

Fig. 11.1. The problem under study

Excluding the components related to the cavity of crack, we ﬁnd [h1 − ih2 ] = iχH02 δ (ψ) U1 , n1 δ (ψ) = − n2 e−iψ , iμr

U1 = [U1∗ ] ,

(11.15)

where the symbol [∗] denotes the jump of the corresponding magnitude upon transfer through the section. In the cavity of crack (on the axis of crack Lj ) we have he1 = χn21 + 1 h1 + χn1 n2 h2 − χH02 U1∗ cos 2ψ, (11.16) 2 e ∗ h2 = χn1 n2 h1 + χn2 + 1 h2 − χH02 U1 sin 2ψ. The mechanical boundary conditions on the tips of Lj are obtained taking into account the relations (11.3), (11.13), (11.9). Let us represent them in the form of complex equalities ±

±

(t11 + t22 ) − e2iψ (t22 − t11 + 2it12 ) + 2χμ0 H02 × H02 α (ψ) U1∗± − χn2 nm h± m = 2 2 = 2 N ± − iT ± + μ0 χ2 H02 n2 , α (ψ) = χn2 e−iψ − i.

(11.17)

Here N ± and T ± are the eﬀective on the tips Lj normal and tangential forces; the upper sign concerns the left tips. In the sequel, we consider that [N − iT ] = 0. Boundary equality (11.17) should be satisﬁed only on one of the edges of each crack, if, in this case, the condition of continuous extendability of its left side upon the transfer through Lj is taken into account: 2 [t11 + t22 ] − e2iψ [t22 − t11 + 2it12 ] + 2μ0 χH02 β (ψ) U1 = 0, χ n1 n2 − i 1 + χn22 β (ψ) = μr

(11.18)

446

11 Inﬂuence of Magnetizability

We complete the statement of the boundary-value problem, by paraphrasing conditions (11.15), (11.17) and (11.18) in complex variables. We have [F (ζ)] = χH02 δ (ψ) U1 (ζ) ,

k

ζ∈L=

Lj ,

(11.19)

j=1

2 [Re (Φ (ζ) + W (ζ))] − e2iψ ζW (ζ) + W1 (ζ) + χμ0 H02 β (ψ) U1 (ζ) = 0, 2ReW (ζ) − e2iψ {¯ z W (ζ) + W1 (ζ)} + χμ0 H02 Λ = R (ζ) , where Λ = Im F (ζ) α (ψ) + H02 α (ψ) U1∗ (ζ) , 2 1 2 χn2 + e2iψ − 1 , R (ζ) = N − iT + χμ0 H02 2 2μU1∗ (ζ) = Im {χμ0 H02 F (ζ) − W (ζ) − κΦ (ζ) + e2iψ ζW (ζ) + Φ1 (ζ) . The representations of the sought-for analytic functions, are correct, in the sense that the conditions for the jumps on the cracks are satisﬁed independently from the densities occurring in them, and can be written, following the scheme in the paper [272]. We get 1 ω (ζ) p1 (ζ) χμ0 H02 dζ, W (z) = − dζ, F (z) = 2πi ζ −z 2πi ζ−z W1 (z) =

1 2πi

L

ζp1 (ζ)

2 dζ

L

(ζ − z)

+

1 2πi

L

L

p2 (ζ) dζ, ζ −z

(11.20)

Φ1 (z) = W1 (z) + χμ0 H02 F (z) , Φ (z) = W (z) + χμ0 H02 F (z) , 2μ pj (ζ) = iU1 (ζ) − U2 (ζ) + e20 Λj (ψ) U1 (ζ) , κ+1 in1 χ (2 − κ) − (κ + 1) n2 Λ1 (ψ) = , i + χe−iψ 2 μr iχ n1 , −κ + χ (2 − κ) e−iψ Λ2 (ψ) = 2 μr 2 e20 = H02 μ0 μ (j = 1, 2) , μ0 ω (ζ) = δ (ψ) U1 . In formulas (11.20) functions Uj are expressed as displacements according to the relation (ds is the element of the arc of contour L) (U1 + iU2 ) eiψ =

d [u1 + iu2 ] , ds

(11.21)

which is coherent with the deﬁnition of function U1 in (11.14), (11.15).

11.2 Ferromagnetic Medium, Weakened by the Tunnel Cracks

447

Functions (11.20) do not still fully correspond to the physical content of the stated boundary problem. It is necessary to ensure that the conditions of uniqueness of displacements in the domain occupied by the medium are satisﬁed, as well as that the integral equalities (n1 b1 + n2 b2 ) ds = 0, (−n2 h1 + n1 h2 ) ds = 0 (11.22) Cj

Cj

(j = 1, 2, . . . , M ) , where Cj is arbitrary closed contour, which includes Lj . The conditions of uniqueness of displacements are reduced, in virtue of (11.20), to the form (U1 + iU2 ) dζ = 0 (j = 1, 2, . . . , M ) . (11.23) Lj

Equalities (11.22) can be represented, taking into account (11.12), in the equivalent form ω (ζ) dζ = 0

(j = 1, 2, . . . , M ) .

(11.24)

Lj

Thus, integral representations (11.20) make sense only when the conditions (11.23), (11.24) are fulﬁlled. In fact, equalities (11.24) follow from (11.23). This can be easily shown, by appealing to the ﬁrst relation (11.19) and deﬁnition (11.21). The boundary-value problem (11.19), using representations (11.20), is easily reduced to the following system of singular integral equations of ﬁrst order [272, 273] 2

Un (ζ) dGmn (ζ, ζ0 ) = Nm (ζ0 ) , ζ0 ∈ L (m = 1, 2) ,

(11.25)

L n=1

where

H2 H30 g 2 − H1 H40 (κ + 1) + H30 h 2 − iχ2 e20 (κ + 1) δ (ψ) H50 4 dτ , dζ , dτ = ζ − ζ0

dG12 = Im 1 + iχ2 (κ + 1)e20 n01 n02 4 + H30 (h − g) 2 dτ ,

dG21 = Re H60 (H1 h − H2 g)/22 + χ 1 + χ sin2 ψ0 × e20 (κ + 1)H/4 dτ ,

dG22 = Re H60 (g − h) 2 − χ 1 + χ sin2 ψ0 × (κ + 1) e20 4 dτ , dG11 = Im

448

11 Inﬂuence of Magnetizability

g = e2i(ψ0 −ψ) ,

2N1 (ζ) = π (κ + 1) N /μ + χe20 χn22 + cos 2ψ − 1 2 ,

2N2 (ζ) = π (κ + 1) −T /μ + χe20 n1 n2 ,

h = e2iψ0

ζ − ζ0 , ζ − ζ0

H1 = i + e20 Λ1 (ψ) , H2 = e20 Λ2 (ψ) − i, κ−1 −1 + 2H4 , H4 = (κ + 1) + iχ2 e20 n1 n2 /4, H3 = κ+1 H6 = 1 + χ 1 + χn22 e20 2, H5 = α (ψ) + χ2 e20 n1 n2 1 − κ + e2iψ 2, Hi = Hi (ψ) , H = H (ψ, ψ0 ) = H1 + χ2 e20 δ (ψ) 1 − κ + e2iψ0 2, Hi0 = Hi (ψ0 ) . This system must be considered in conjunction with the additional conditions (11.23). On assumption that the contours Lj do not have common points and their curvature, as well as their function Ni (ζ) satisfy Holder’s condition, we obtain a unique solution in the class of functions, unbounded on the ends of the arcs Lj . For the determination of the stress intensity factor, we introduce a parametric representation of the contour Lj (in the sequel, the index j is omited): ζ = ζ (β) , −1 ≤ β ≤ 1. In accordance with the above, we assume Ωi (β) , Ui (ζ) = 1 − β2

Ωi (β) ∈ H [−1, 1]

(i = 1, 2).

(11.26)

Substituting functions (11.26) into the integral representations (11.20), we obtain, by the standard procedure of distinction of singularities of the solution at the ends Lj of the formula for the stress intensity factors in the tips of the crack √ iΩ2 (±1) − Ω1 (±1) 1/2 + − = lim 2r (Snn − iSns ) = ±μ (s (±1)) 2 κ+1 ⎞⎫ ⎛ 2 ⎬ 1 2 ±⎠ + χe20 Ω1 (±1) ⎝− + , (11.27) aαδ n± n α δ ⎭ 2 κ+1

K sI

s iKII

α,δ=1

where 2χ (κ − 2) , a22 = −2χ, μr (κ + 1) κ−2 = a21 = iχ 1 + , μr (κ + 1)

a11 = a12

n± 1 = cos ψ (±1) ,

n± 2 = sin ψ (±1) .

11.2 Ferromagnetic Medium, Weakened by the Tunnel Cracks

449

The upper sign concerns the tip c = b (β = 1), and lower one, to the tip c = a (β = −1) , Snn , Sns are the normal and tangent total stresses on the → area with the normal − n = (cos ψc , sin ψc ) on the extension beyond the tip c. As a ﬁrst example we take a medium with rectilinear crack of length 2, oriented, with respect to the initial magnetic ﬁeld, in the manner shown in Fig. 11.2. We take the parametric equation L in the form: ζ = ilβeiψ , ζ0 = ilβ0 eiψ , −1 ≤ β, β0 ≤ 1. In this case, the integral (11.25) and the additional condition (11.23) take the form 2

1 pmn

n=1

1 −1

−1

Ωn (β)dβ ∗ = Nm (β0 ) 1 − β 2 (β − β0 )

(m = 1, 2) ,

(11.28)

Ω1 (β) + iΩ2 (β) dβ = 0, 1 − β2

p11 =

4 j=0

j

dj χ ,

p21 =

3

d∗j χj ,

j=2

χ2 2 ∗ e (κ − 1) n1 n2 , (β) = Nm (ζ), p12 = Nm 4 0 χ p22 = 1 + e20 1 + χn22 (1 − κ) , d0 = −1, 4 n2 e20 e2 d1 = (κ − 1) , d2 = − 0 (5 − κ) 1 , 4 4 μr 2 4 e0 e0 2 2 1 − 2κ 2 d3 = (κ + 1) n2 , d4 = n1 n2 +κ+1 , 4 4 μr e2 2κ − 4 d∗2 = 0 n1 n2 κ + 1 + , 4 μr 2κ − 1 e40 ∗ 2 d3 = n1 n2 1 + χn2 −κ−1 . 4 μr

x2

λ0

ψ

x1 n→ →

B0

Fig. 11.2. Ferromagnetic medium with rectilinear crack in strong magnetic ﬁeld

450

11 Inﬂuence of Magnetizability

The solution of the characteristic system (11.28) is the following: Ωn (β) = An β

(n = 1, 2) ,

(11.29)

where 1 (p22 N1∗ − p12 N2∗ ) , πΔ Δ = p11 p22 − p21 p12 . A1 =

A2 =

1 (p11 N2∗ − p21 N1∗ ) , πΔ

The sought-for analytic functions and their combination are determined accordingly (Fig. 11.3): F (z) =

χH02 μ (A2 − A1 H1 ) A1 δ (ψ) γ1 (z), W (z) = γ1 (z), 2i i (κ + 1)

(11.30)

μe−2iψ {(A2 − A1 H1 ) γ2 (z) + (A2 − A1 H2 ) γ1 (z)} , i (κ + 1) μ −12 × (A1 H1 − A2 ) lei[λ0 −3(θ1 +θ2 )/2] (ρ1 ρ2 ) zW (z) + W1 (z) = × (κ + 1) × sin (θ2 − θ1 ) − i [A1 (H1 + H2 ) − 2A2 ] × ρei[θ−(θ1 +θ2 )/2] (ρ1 ρ2 )−1/2 − 1 e−2iλ0 ,

W1 (z) =

ρ1 eiθ1 = z − c,

ρ2 eiθ2 = z + c,

λ0 = ψ − 3π/2, γ2 (z) =

γ1 (z) =

z 3 − 2zc2 − 1, (z 2 − c2 )3/2

(z 2

z

z = ρeiθ ,

− c2 )1/2

− 1,

c = leiλ0 .

With the aid of functions (11.30) we ﬁnd the mechanical and magnetic magnitudes at any point of the body. In particular, on the straight line, parallel to axis of the crack we get ρ 2ε1 θ1 + θ2 cos θ − (Snn − iSns )/μ = −1 + (11.31) 1/2 i 2 (ρ1 ρ2 ) ⎛

3i⎝

λ−θ1 +θ2

⎞ ⎠

e20 2χ + (2χ + 1) e2iλ , 2 (ρ1 ρ2 ) ⎛ ⎞ 2 iχ A1 H 1 − A2 2 A2 + iA1 ε1 = = e20 A1 ⎝− + . aα,δ nα nδ ⎠ − κ+1 4 κ+1 κ+1 + ε¯1 le

2

sin (θ2 − θ1 ) 1/2

+

α,δ=1

11.2 Ferromagnetic Medium, Weakened by the Tunnel Cracks

451

z

θ

θ2

c

θ1

λ0

x1

0 –c

Fig. 11.3. On the determination of closed solution for rectilinear crack

However, if the straight line coincides with the axis of crack, then we ﬁnd: when ρ ≤ l, 2 e0 2iλ 2χ + (2χ + 1) e + 2iε1 , Snn − iSns = μ (11.32) 2 when ρ > l Snn − iSns = μ

e20 ρ 2iλ 2χ + (2χ + 1) e +2iε1 1 − . 2 ρ2 − l 2

The eﬀect of the orientation of crack with respect to the initial magnetic → − ﬁeld B 0 on the mechanical and magnetic magnitudes can be easily is found with the aid of these dependences. The simplest results are obtained for the horizontal or vertical crack. In this case, n1 n2 = 0, p12 = p21 = 0 and the system (11.28) splits into two independent equations; moreover the magnitudes An , which occur in (11.29), are such that: A1 =

N1∗ , πp11

A2 =

N2∗ , πp22

where for the horizontal crack (n1 = 0, n2 = −1) χe20 χe2 5−κ p11 = − 1, p22 = 1 − 0 (κ − 1) , κ−1−χ 4 μr 4 πN πT N1∗ = (κ + 1) , N2∗ = − (κ + 1) . 2μ 2μ for the vertical crack (n1 = 1, n2 = 0) χe2 χe2 5−κ p11 = 0 κ − 1 − χ − 1, p22 = 1 − 0 (κ − 1) , 4 μr 4 πN πT N1∗ = (κ + 1) , N2∗ = − (κ + 1) . 2μ 2μ

(11.33)

452

11 Inﬂuence of Magnetizability

From formulas (11.31)–(11.33), it is immediately evident that there are √ such values of the parameter bc = μr e0 = B02 μ0 μ, which are called critical, under which the components of the tensors of magneto-elastic and Maxwell stresses, as well as the vectors of intensity and induction of magnetic ﬁeld in the ferromagnetic space with crack tend to inﬁnity. This phenomenon was discovered earlier [286, 287], where the case of horizontal crack was considered. At the same time, the matter is diﬀerent for the vertical crack (parallel to the initial magnetic ﬁeld). As it follows from (11.33), when N = 0, T = 0, such a critical = 0, T = 0, exists value does not exist at all, but when N theoretically b∗c = 6, 3 · 102 , when μr = 105 , ν = 0, 25 , but this value is not realized physically. If one takes into account the fact that in the homogeneous ferromagnetic medium under initial magnetic ﬁeld (0, B02 , 0) there are total 2 2 stresses, namely S11 = −μ0 H02 /2 S12 = 0, S22 = (2χ + 1/2) μ0 H02 , then we ∗ can come to the conclusion that when bc = bc , the plane form of equilibrium of ferromagnetic medium with crack becomes impossible. For a rectilinear crack, oriented to the direction of the initial magnetic ﬁeld at a certain angle π/2 − λ0 , the critical value b∗c is determined according to (11.29), as the smallest positive root of the equation Δ = 0. This is an algebraic equation of fourth degree with respect to the parameter bc . The magnitude b∗c assumes its smallest value when λ0 = 0 b∗c = 3, 6 · 10−3 whenμr = 105 , ν = 0, 25). Further, when λ0 increases from 0 to π/2, it monotonically increases up to the above-indicated value for the vertical crack. From the before said follows that the consideration of the overall situation shows that there is a whole spectrum of critical values of the parameter bc , depending on the conﬁguration of cracks, their mutual arrangements, orientations with respect to the initial magnetic ﬁeld, and the type of load. Apparently, it makes sense to study the interaction of mechanical and magnetic ﬁelds in a ferromagnetic medium with cracks only when the values of the level of magnetic ﬁeld are such that 0 ≤ bc < b∗c . Another interesting case is when the medium is weakened by a singular parabolic crack ξ1 = p1 β cos γ − p2 β 2 sin γ, ξ2 = p1 β 2 sin γ + p2 β 2 cos γ, −1 ≤ β ≤ 1 (γ is the angle of revolution of the axes of the parabola with respect to the coordinate system 0x1 x2 ). The calculation of the stress intensity factors KI,II was done making use of the system of integral (11.25), (11.23) and formula (11.27). Figure 11.4 gives the graphs for the critical values of parameter b2c depending on the orientation of the crack (angle γ) for diﬀerent values of the parameter of curvature p2 . The curves, which characterize the dependence of the stress intensity factor KI from the parameter b2c , for diﬀerent orientations of the straight crack are presented in Fig. 11.5. Let us consider the situation, when the medium is weakened by two rectilinear cracks with centers on the axis 0x2 . The lengths of both cracks 2l = 2l1 = 2, one of which is located on the axis x1 , the second is turned with respect to it to the angle γ. The distance between the centers of cracks is equal

11.2 Ferromagnetic Medium, Weakened by the Tunnel Cracks

453

(b*c)2 ⋅ 10–3 p2 = 0,2 0

8

0,6

γ

0

37,5

Fig. 11.4. Graphs of critical values (b∗c )2 depending on the orientation of the parabolic crack KI / √l ⋅10−5

γ=0

45

30

60°

26

2

(bc) · 10–5

0

3

Fig. 11.5. Dependence of the coeﬃcient of intensity on the parameter b2c (b*c)2 · 10–3

α=1

3

10 2

5

0

45

γ

Fig. 11.6. Graphs of the critical values of the parameter b2c for ferromagnetic medium with two cracks

to d. The results of the calculations for the critical values of the parameter b2c , depending on the angle γ for diﬀerent d are shown in Fig. 11.6. The analysis of numerical results shows that the initial magnetic ﬁeld exerts essential inﬂuence on the stress intensity factors only close to its critical

454

11 Inﬂuence of Magnetizability

values. For example, for the horizontal crack a change of the magnitude KI is observed close to the critical value B0∗ ≈ 1, 2 T. In the general case, the critical values of the level of the initial magnetic ﬁeld depend on the mutual arrangement of defects and their conﬁgurations.

11.3 Generalized Kirsh Problem for Ferromagnetic Medium with Cavity in Strong Magnetic Field 11.3.1 Statement of the Problem. Complex Representation of the Solutions Let us consider an unbounded medium made of soft-iron ferromagnetic material, in reference to a rectangular Cartesian coordinate system 0x1 x2 x3 , weakened by a tunnel cylindrical cavity along the axis x3 . Let us assume that the initial magnetic ﬁeld, into which a ferromagnetic body is placed, is uniform → − (inﬁnitely) and given by a vector of magnetic displacement B 0 = (0, B02 , 0), and normal (N ) and tangential (T ) mechanical stresses act on the border of the opening, and the cavity of the opening is ﬁlled by vacuum (Fig. 11.7). The initial undisturbed magnetic ﬁeld that corresponds to the rigid (nondeformated) state of ferromagnetic body is determined by the equations of magneto-statics (11.5)–(11.7). Let us introduce complex representations of the intensity of the initial magnetic ﬁeld in the body and the cavity iB02 F (z), μ0 μr iB02 e F (z), H1e − iH2e = μ0 H1 − iH2 =

(11.34)

where F (z) and F e (z) are functions, analytical on the external part of the opening (domain D), and in the domain De , occupied by the opening, respectively. Then the problem of magneto-statics (11.5)–(11.7) is reduced to the classical boundary-value problem of the theory of functions (Γ is the contour of the cross section of cavity):

(11.35) Re eiψ (F (ζ) − μr F e (ζ)) = 0,

iψ e Im e (F (ζ) − F (ζ)) = 0, ζ ∈ Γ, which is equivalent to the regular integral equation of second order μr − 1 μr − 1 cos (α0 − ψ0 ) cos ψ0 . p (ζ0 ) + p (ζ) ds = 2 π (μr + 1) r0 μr + 1 Γ

(11.36)

11.3 Generalized Kirsh Problem for Ferromagnetic Medium

x2 n

455

→

n

ψ

x2

x1n x1 0

Γj

Γ1

→

→

B0

Fig. 11.7. Ferromagnetic elastic medium with the openings in the strong magnetic ﬁeld

Here ψ, ψ0 are the angles between the external normal to the contour Γ and the axis 0x1 at the points ζ and ζ0 ∈ Γ, respectively, r0 = |ζ − ζ0 | , α0 = arg (ζ − ζ0 ); the direction of integration is counterclockwise. In this case, the functions F (z), F e (z) are determined by the following formulas F (z), z ∈ D, p(ζ)ds 1 −1= (11.37) 2π ζ −z F e (z), z ∈ De , Γ

where Imp (ζ) = 0. Thus, the initial magnetic ﬁeld can be considered known. For example, if cavity has circular cross section of radius a, it would be F (z) = −1 −

(μr − 1) a2 , (μr + 1) z 2

F e (z) = −

2 . μr + 1

(11.38)

→ − As a result of the deformation of the body, small ﬂuctuations h = → − → − →e − → − (h1 , h2 ) , b = μ0 μr h = (b1 , b2 ) and h = (he1 , he2 ) , b e = μ0 he = (be1 , be2 ) are added to the initial magnetic ﬁeld. Accordingly, the summarizing magnetic ﬁelds in the body and the cavity are determined by the formulas Wj = Hj + hj , Wje = Hje + hej

(j = 1, 2) .

(11.39)

The equations of equilibrium of soft-iron ferromagnetic body is written in the form (before linearization) ∂j tji + χμ0 ∂j (Wi Wj ) = 0, where tij = σij + χμ0 Wi Wj , ∂j = ∂/∂xj (i, j = 1, 2) .

(11.40)

456

11 Inﬂuence of Magnetizability

From (11.40) follow the relations 0 σij = σij − 2χμ0 Wi Wj ,

0 ∂j σji = 0 (i, j = 1, 2) .

(11.41) 0 0 0 = −∂1 ∂2 U, σ22 = ∂12 U , Introducing the function of stresses σ11 = ∂22 U, σ12 and applying the condition of compatibility of deformation, we come, taking into account the equalities ∂j Wj = 0, ∂1 W2 = ∂2 W1 , to the diﬀerential equation relative to the function of stresses 2 2 (11.42) ∇2 ∇2 U = 4χμ0 ν∗ (∂1 W1 ) + (∂2 W1 ) , −1

ν∗ = (1 − 2ν) (1 − ν)

.

The ﬂuctuations of the magnetic ﬁeld can be presented in the form h1 − ih2 =

iB02 R (z) , μ0 μr

he1 − ihe2 =

iB02 e R (z) , μ0

(11.43)

where R (z) and Re (z) are functions analytical in the domains D and De , respectively. Then (11.42) can be represented in the form (μ is the shear modulus) 2

∇2 ∇2 U = 8ν∗ mχμ−1 r |Ω (z)| ,

(11.44)

where B2 μb2c , b2c = 02 , 2μr μμ0 Ω (z) = F (z) + R (z) , Ω (z) = dΩ/dz. m=

The integration of this equation gives U = U0 + U∗ , z ϕ (z) + χ∗ (z)) , U0 = Re (¯ ω (z) = Ω (z) ;

(11.45) χν∗ 2 U∗ = m |ω (z)| , 2μr

where ϕ (z) , χ∗ (z) are arbitrary functions, analytical in the domain D. The obtained expression for the function of stresses in combination with (11.40), (11.41) makes possible to write the elementary complex representations of the ﬁeld magnitudes under consideration. We get 2mνχ 2 |Ω (z)| , (1 − ν) μr = 2 (¯ z Φ (z) + Ψ (z))

t11 + t22 = 4ReΦ (z) − t22 − t11 + 2it12

−1 2 + 2ν∗ mχμ−1 r Ω (z) ω (z) − 2mχμr Ω (z) ,

2μ (u1 − iu2 ) = κϕ (z) − z¯Φ (z) − ψ (z) + 1 2 Ω (z) dz − ν∗ Ω (z) ω (z) , 2

2mχμ−1 r

(11.46)

11.3 Generalized Kirsh Problem for Ferromagnetic Medium

457

where u1 , u2 are the corresponding components of the vector of small elastic displacement in the ferromagnetic medium; κ = 3−−4ν for the ﬂat deformation; ϕ (z) = Φ (z) , χ∗ = ψ (z) , ψ (z) = Ψ (z). The tensor of Maxwell stresses Tij is added to the tensor of magnetoelastic stresses tij , which is manifested in both the body and in the cavity of the opening. The components of this tensor take the form 1 Tij = μ0 μr Wi Wj − μ0 δij (Wk Wk ) , 2

(11.47)

where δij is the Kronecker symbol; summing is done on index k. The corresponding analytical representations of the Maxwell stresses in the body and the cavity are such that: 2 T11 + T22 = 2mχμ−1 r |Ω (z)| ,

e e T11 + T22 = 0,

(11.48)

2

T22 − T11 + 2iT12 = 2mΩ (z) , e e e − T11 + 2iT12 = 2mμr (Ωe )2 , T22

where Ωe = F e (z) + Re (z). Thus, all ﬁeld magnitudes in the body and the cavity are expressed as four analytic functions Φ (z) , Ψ (z) , R (z) and Re (z). For their determination we have (linearized) boundary conditions of the opening (11.4). The power boundary condition occurring there can be conveniently represented in the form [S11 + S22 ] − e2iψ [S22 − S11 + 2iS12 ] = 2 (N − iT ) ,

(11.49)

where N, T are the given mechanical, normal and tangential forces on the contour of the openings; the angular parentheses indicate the jump of the corresponding magnitude on the interface of the media. Taking into account complex representations (11.43), (11.45), (11.46) and (11.48), the boundary condition (11.49) and the electromagnetic conditions of conjugation in (11.4) can be expressed (after the appropriate linearization) in terms of the boundary values of the sought-for analytic functions. We have z Φ + Ψ) + mΛ1 = N − iT + mA1 , (11.50) 2ReΦ − e2iψ (¯

Im 2μ (R − Re ) eiψ + (F − F e ) Q∗ = N1 + mA2 , iψ −1

e e + F μr − F e Q∗ = N2 + mA3 , Re 2μ Rμ−1 r −R where

Q = 2Φ − (κ − 1) Φ, N1 = Im eiψ (F − F e ) (N + iT ) ,

e (N + iT ) , ν1 = ν∗ χμ−1 N2 = Re eiψ F μ−1 r −F r ,

458

11 Inﬂuence of Magnetizability

2 2 e 2 e2iψ − ν1 |F | , A1 = ν1 F f + μ−1 r F − μr (F )

A2 = Im {(F e − F ) Λ} , A3 = Re F e − μ−1 r F Λ , e e 2iψ , Λ1 = 2ν1 Re F R − ν1 F r¯ + R f + 2F Rμ−1 r − 2μr F R } e e e iψ −1 −iψ , Λ2 = 4ν1 e Re F R − (4χ + 2) μr F R − 2μr F R e 2 2 2 Λ = 2ν1 |F | eiψ + μr F e − (2χ + 1) μ−1 e−iψ , r F Q∗ = Qeiψ + mΛ2 .

In the boundary conditions (11.50), the coeﬃcients of the sought-for functions are the limiting values of the known analytic functions, which characterize the initial (undisturbed) magnetic ﬁeld in the body and the cavity. Since for many ferromagnetic materials χμ−1 r ≈ 1 and μr >> 1, the eﬀect of magnetizability of material on the stressed state is determined by the parameter m. 11.3.2 Stress Concentration in Circular Opening We assume below that the contour of the opening is free from load and that a uniform ﬁeld of mechanical stresses σij , occurs at inﬁnity, moreover

σ12 = 0. Let us represent the sought-for analytic functions in the form (a is the radius of the opening) Φ= R=

∞ k=0 ∞ k=0

γk

a 2k z

Rk

,Ψ =

a 2k z

∞

(2kγk + λk )

k=0 ∞

, Re =

Rk∗

z 2k

k=0

a

a 2k z

+ λ−1 ,

(11.51)

, z = x1 + ix2 .

In view of the power and geometric symmetry, all coeﬃcients in series (11.51) would be real. The functions, which determine the initial magnetic ﬁeld, are given by (11.38). Let us require that the ﬂuctuations of the magnetic ﬁeld disappear at inﬁn∞ ∞ = σ11 , σ22 = σ22 , ity and the mechanical stresses σij are bounded (σ11 ∞ σ12 = 0). Then, taking into account the relations (11.46), (11.41) and (11.43) we obtain 2m , 1−ν = σ22 − σ11 + 4m.

4γ0 = σ11 + σ22 + 2λ−1

R0 = 0,

(11.52)

The rest of the coeﬃcients are determined from the boundary equalities (11.50). Using the appropriate standard procedure, we come to the next system of equalities:

11.3 Generalized Kirsh Problem for Ferromagnetic Medium

459

1 m ( σ11 + σ22 ) + + 2mν∗ R1 , (11.53) 2 1−ν 1 4 − 6ν 5 m + 2m 2R0∗ − ν∗ R1 + ν∗ R2 , λ1 = ( σ22 − σ11 ) + 2 1−ν 3 2k + 3 ∗ Rk+1 − Rk (k = 2, 3, . . .) , λk = 2m 2Rk−1 + kν∗ 2k + 1 1 m 1 ∗ + m 4R0 + ν∗ R1 + ν∗ R2 , γ1 = ( σ22 − σ11 ) + 2 1−ν 3 2k − 1 ∗ Rk+1 + ν∗ Rk + (k = 2, 3, . . .) , γk = m 4Rk−1 2k + 1

λ0 =

2μ (R1 + R0∗ ) + 4m (R1 + R2 + R0∗ ) = (κ + 1) γ1 , 2μ (μr R0∗ − R1 ) + 4m (R1 + R2 + R0∗ ) = (κ + 1) γ1 , ∗ 2μ (Rk+1 + Rk∗ ) + 4m Rk + 2Rk+1 + Rk+2 + Rk∗ + Rk−1 = (κ + 1) (γk + γk+1 ) , ∗ 2μ (Rk+1 − μr Rk∗ ) + 4m Rk − Rk+2 − Rk∗ + Rk−1 = (κ + 1) (γk − γk+1 )

(k = 1, 2, . . .) .

The analysis of this system leads to the relations of connection (μr ± 1 ≈ μr ) 1 ∗ ∗ μr Rk−1 + Rk∗ , R−1 = 0 (k = 0, 1, . . .) 2 and the equation relative to the coeﬃcients Rk∗ : 2k + 1 + ν −1 ∗ ∗ ∗ Rk+1 = 0 μRk + 4mν Rk−1 + 2k + 3 Rk+1 =

(k = 1, 2, . . .) , μR0∗ +

4 κ+1 (1 + ν) mR1∗ = 3 μr

σ22 − σ11 m + 2 1−ν

(11.54)

(11.55) .

When ν = 0.5 we get an equation with constant coeﬃcients, the solution of which, in consideration of the initial condition in (11.55), takes form μ 2 μ , −1− 4m 4m

σ22 − σ11 + 4m C= . μr (μ + 2mZ1 )

Rk∗ = CZ1k ,

Z1 =

(11.56)

With accuracy of m/μ = b2c / (2μr ), we can put 1 ( σ22 − σ11 + 4m) , μμr Rk∗ = 0 (k = 1, 2 . . .) .

R0∗ =

(11.57)

460

11 Inﬂuence of Magnetizability

When ν < 0.5, the diﬀerence equation has constant coeﬃcients whenever k is suﬃciently large. The detailed analysis of the system (11.55) gives (with accuracy of m/μ) κ+1 2m R0∗ =

σ22 − σ11 + , (11.58) 2μμr 1−ν Rk∗ = 0

(k = 1, 2 . . .) .

According to (11.58), we ﬁnd the ﬂuctuations of magnetic induction in the body and the cavities: iB02 a2 {(1 − ν) ( σ22 − σ11 ) + 2m} 2 , μ z 2iB 02 {(1 − ν) ( σ22 − σ11 ) + 2m} . be1 − ibe2 = μμr b1 − ib2 =

(11.59)

We determine now the total normal stress on the contour Sψψ of the free from mechanical stresses opening. Taking into account the equalities (11.48) and the power boundary condition (11.49), we ﬁnd 1 2 e e e − T11 + 2iT12 ) = 4ReΦ + 2mν∗ |Ω| Sψψ =S11 + S22 + Re e2iψ (T22 2 2 (11.60) + mμr Re e2iψ (Ωe ) . After we linearize expression (11.60) and substitute function (11.51) in it, we obtain the following relations for the circular opening, if we also consider relations (11.54), (11.58) Sψψ = Sθθ = σ11 + σ22 +

2 (3 − 4ν) m + 2 ( σ22 − σ11 + 4m) cos 2θ, 1−ν

where θ is the polar angle of the point of contour. Analogous calculations for the magneto-elastic and elastic stresses on the contour of the opening give 2m (1 − 2ν) + 2 ( σ22 − σ11 + 2m) cos 2θ, 1−ν 2m + 2 ( σ22 − σ11 ) cos 2θ. = σ11 + σ22 − 1−ν

tθθ = σ11 + σ22 + σθθ

Let us consider, for example, the case, when they is no stress at the inﬁnite, b2c = 0, 8 · 10−4 ; μ = 0, 7 · 1011 N/m2 , μr = 103 , ν = 0, 3. Then, m = 2800 N/m2 , and the calculations give. 2 max Sθθ = 16 − m ≈ 36, 7 · 103 N/m2 . 1−ν

11.3 Generalized Kirsh Problem for Ferromagnetic Medium

461

Thus, the eﬀect of magnetizability on the stress concentration in the opening in ferromagnetic elastic medium can be proved to be essential. From the solution follows that in the problem considered above, the palne form of equilibrium is always possible; the choise of the value for the parameter b2c is irrelevant. 11.3.3 Opening of Arbitrary Configuration in Ferromagnetic Medium We assume now that the cross sections of the tunnel cavities ! are suﬃciently smooth, closed contours Γj (j = 1, 2, . . . , M ), moreover, Γj = Ø. The conditions of loading of body with cavities remain the same as before. Following [273], let us introduce, for the solution of the boundary problem (11.50), the integral representations of the sought-for analytic functions: 1 ω (ζ) dζ q (ζ) dζ 1 + A, R (z) = , (11.61) Φ (z) = 2πi ζ −z 2πi ζ −z Γ

κ Ψ (z) = 2πi

Γ

1 R (z) = 2πi e

1 ω (ζ)dζ − ζ −z 2πi

Γ

q (ζ) dζ , ζ −z

Γ

Γ

ζω (ζ) dζ + B, z ∈ D, (ζ − z)2

z ∈ Dje ,

where ω (ζ) = {ωj (ζ), ζ ∈ Γj } , q (ζ) = {qj (ζ), ζ ∈ Γj } are subjected to the deﬁnition of densities; Dje is the ﬁnal simply connected domain, bounded by the contour Γj ; D is the domain, occupied by the body. The constants A and B must ensure the existence of the given uniform ﬁeld σij at the inﬁnite. From the relations (11.40), (11.50) we ﬁnd 2m 2 |F | + 2Re F R , σ11 + σ22 = 4ReΦ (z) − 1−ν σ22 − σ11 + 2iσ12 = 2 {¯ z Φ (z) + Ψ (z)} + 2mν∗ × F f + R f + F r − 4m F 2 + 2F R . Hence, taking into account representations (11.61), we determine the constants A and B: m

σ11 + σ22 + , 4 2 (1 − ν)

σ22 − σ11 + 2i σ12 B= + 2m. 2 A=

For the computation of functions ω (ζ) , q (ζ), we apply the standard procedure of reduction of the boundary-value problem to a system of singular

462

11 Inﬂuence of Magnetizability

integral equations. In this case, we can split it into two independent systems, disregarding small (in comparison with the unity) terms. After the necessary transformations, we obtain 2 m (−1) (κ + 1) Xm (ζ0 ) + Xn (ζ) dHmn (ζ, ζ0 )ds n=1 Γ

= Nm (ζ0 ) (m = 1, 2) , ⎫ ⎧ 2 ⎨ ⎬ Bnm (ζ0 ) Yn (ζ0 ) + Yn (ζ) dKmn (ζ, ζ0 )ds ⎭ ⎩

(11.62)

= Qm (ζ0 )

(11.63)

n=1

Γ

(m = 1, 2) ,

where X1 = Re ω (ζ) , X2 = Im ω (ζ) , Y1 = Req (ζ) , Y2 = Imq (ζ) , % & dζ 1 2iψ0 ζ − ζ 0 2i(ψ0 −ψ) + κe dH11 (ζ, ζ0 ) = Im 2 + e , π ζ − ζ0 ζ − ζ0 % & dζ ζ − ζ0 1 dH12 (ζ, ζ0 ) = Re 2 + e2iψ0 − κe2i(ψ0 −ψ) , π ζ − ζ0 ζ − ζ0 % & dζ ζ − ζ0 1 + κe2i(ψ0 −ψ) dH21 (ζ, ζ0 ) = − Re e2iψ0 , π ζ − ζ0 ζ − ζ0 % & dζ 1 2iψ0 ζ − ζ 0 2i(ψ0 −ψ) dH22 (ζ, ζ0 ) = Im e − κe , π ζ − ζ0 ζ − ζ0 1 B11 (ζ0 ) = −2G sin ψ0 + mq0 2 + Im F − e2iψ0 + mq0 μr Im F + e2iψ0 , μr 1 B12 (ζ0 ) = −2G cos ψ0 + mq0 2 + Re F − e2iψ0 + mq0 μr Re F + e2iψ0 , μr

iψ0 + 1 1 − F (ζ0 ) − B21 (ζ0 ) = G 1 + F (ζ0 ) cos ψ0 − 2mν∗ Re e μr μr 1 1 − − iψ0 − + F (ζ0 ) − − F (ζ0 ) F (ζ0 ) ReF (ζ0 ) + m 2 + Re e μr μr 1 + mμr Re eiψ0 F + (ζ0 ) − − F − (ζ0 ) F + (ζ0 ) , μr

iψ0 + 1 1 − sin ψ0 − 2mν∗ Re e F (ζ0 ) B22 (ζ0 ) = −G 1 + F (ζ0 ) − μr μr 1 1 − ImF − (ζ0 ) − m 2 + F (ζ0 ) F − (ζ0 ) Im eiψ0 F + (ζ0 ) − − μr μr 1 − mμr Im eiψ0 F + (ζ0 ) − − F − (ζ0 ) F + (ζ0 ) , μr

11.3 Generalized Kirsh Problem for Ferromagnetic Medium

463

% & 1 1 dζ dK11 (ζ, ζ0 ) = Re mq0 e2iψ0 2+ F − − μr F + × , π μr ζ − ζ0 % & 1 1 dζ dK12 (ζ, ζ0 ) = Im mq0 e2iψ0 − 2 + F − + μr F + × , π μr ζ − ζ0 % 1 1 − eiψ0 + 2mν∗ F (ζ0 ) × dK21 (ζ, ζ0 ) = Im G 1 − π μr 1 − 1 × Re eiψ0 F + (ζ0 ) − F (ζ0 ) −m 2+ eiψ0 F + (ζ0 ) − μr μr 1 1 − F − (ζ0 ) F − (ζ0 ) + mμr eiψ0 F + (ζ0 ) − F − (ζ0 ) μr μr

dζ × F + (ζ0 ) , ζ − ζ0 % 1 1 dK22 (ζ, ζ0 ) = Re G 1 − eiψ0 + 2mν∗ Re eiψ0 × π μr 1 − 1 F (ζ0 ) F − (ζ0 ) − m 2 + F + (ζ0 ) − eiψ0 μr μr & dζ 1 F + (ζ0 ) − F − (ζ0 ) F − (ζ0 ) , μr ζ − ζ0

N1 (ζ0 ) = 2 N + mReA1 − 2A + Re Be2iψ0 ,

N2 (ζ0 ) = 2 −T + mImA1 + Im Be2iψ0 , Q1 (ζ0 ) = −qT + mA2 + q0 (κ + 1) ImΦ (ζ0 ) , 1 − F (ζ0 ) (N + iT ) + Q2 (ζ0 ) = Re eiψ0 F + (ζ0 ) − μr 1 + mA3 − Re F + (ζ0 ) − F − (ζ0 ) eiψ0 × 2Φ (ζ0 ) − (κ − 1) Φ (ζ0 ) , μr + iψ0 − q0 = F (ζ0 ) − F (ζ0 ) e .

Φ (ζ0 ) , F ± (ζ0 ) are the corresponding limiting values of the indicated functions on the contour Γ. The succession of calculations is the following. We ﬁrst determine the undisturbed magnetic ﬁeld. We apply the integral (11.36) and formulas (11.34), (11.37) to this eﬀect. Then, we ﬁnd the solution ω (ζ) from system (11.62); after that the functions Φ (z) and Ψ (z) are reconstucted, according to the formulas (11.61). Further, we solve system (11.63) and determine the functions R (z) and Re (z), which makes possible the calculation of the ﬂuctuations of the magnetic ﬁeld in the body and the cavities. In the last stage, we ﬁnd the complete voltages on the forces-free contour of the opening, according to formula (11.60). As an example, let us consider a soft-iron ferromagnetic medium, weakened by a cavity with elliptical cross section described by ξ1 = r1 cos β, ξ2 = r2 sin β (0 ≤ β ≤ 2π). Let that the stresses σij = 0 (i, j = 1, 2), and that

464

11 Inﬂuence of Magnetizability Sψψ r1/r2 = 2

MPa

150 1

B0, T

1

0

0.5

Fig. 11.8. Dependence of stress concentration on the contour of elliptical cavity for technical iron Sψψ r1/r2 = 2 MPa

5 2

0

1

1

0.5

B0, T

Fig. 11.9. Dependence of stress concentration on the contour of elliptical cavity for ferrite F-107

→ − an initial magnetic ﬁeld B 0 = (0, B02 , 0) occurs at inﬁnity. The greatest stresses appear at the points (±r1 , 0). The dependences of stresses Sψψ (r1 , 0) on the level of the initial magnetic ﬁeld, for diﬀerent ratios of the semi-axes of the ellipsis for technical iron (μ = 110 GPa; μr = 2500; ν = 0, 28) and ferrite F-107 (μ = 68 GPa; μr = 110; ν = 0, 3) are represented in Figs. 11.8 and 11.9, respectively.

12 Optimal Control of Physical Fields in Piezoelectric Bodies with Defects

In this chapter we study some optimal control inverse problems of variables such as stress intensity factor which govern the body behaviour. We derive the optimal boundary actions in concrete problems for the control of the characteristics of an electric ﬁeld in piecewise-homogeneous piezoceramic bodies by minimizing the energy.

12.1 Optimization of Fracture Characteristics of Anisotropic Semi-Infinite Plate with Cracks 12.1.1 Direct Problem Let us consider the anisotropic half-plane y ≥ 0, weakened by crack-sections Lj (j = 1, 2, . . . , n). Let that on portions of the border of half-plane U and V , normal P (x) and tangential Q (x) distributed forces are applied respectively and the edges of the sections are free from forces. The direct problem of the theory of elasticity consists in the deﬁnition of the characteristics of the stressstrained state and parameters, which regulate the destruction of the body in the tip of the crack: the stress intensity factors, energy ﬂow on the crack tip, etc. The problem is similar to that set above and was considered [270]. Its solution can be presented in the form −1/2 (t = t (β) , −1 ≤ β ≤ 1) , r1 (t) = Ω0 (β) 1 − β 2 (2) (1) Ω0 (β) = P (x) Ω0 (β, x) dx + Q (x) Ω0 (β, x) dx, U (k)

(12.1)

V

where functions Ω0 (β, x) are determined by the system of equations, indicated in [270].

466

12 Optimal Control

The stress intensity factors in the tips Lj on the basis of (12.1) are deﬁned as linear functionals of the form (j)± (j) (j) Ki = P (x) fi (±1, x) dx + Q (x) gi (±1, x) dx, (12.2) U

(j) fi

(2) (±1, x) = Im Ri Ω0 (±1, x) ,

V (j) gi

(1) (±1, x) = Im Ri Ω0 (±1, x) ,

where −1 Ri = ±2 πs (±1) (¯ μ1 − μ ¯2 ) (μ2 − μ ¯2 ) a1 (ψc )a2 ψc + 1 2πδ2i , δ21 = 0, δ22 = 1

(i = 1, 2; j = 1, 2, . . . , n) .

The upper sign corresponds to the crack tip c = t (1) = b, the lower one (i) to c = t (−1) = a; the index j in the magnitudes Ω0 and Ri is omitted. The energy ﬂow on the tip of crack [196] is determined taking into account the asymptotic behavior of the ﬁelds of stresses and displacements in the neighborhood of the apex by the following quadratic functional (we henceforth use the repetitive indices summation convection) [269]: G = Adkm xk xm α = μ1 − μ ¯2 , 2

(k, m = 1, 2) ,

(12.3)

β = μ2 − μ1 ,

2

d11 = |α| + Re (αβ) , d22 = |α| − Re (αβ) , d12 = d21 = −Im (αβ) , A = 1/4πa11 |μ2 − μ1 |2 (Imμ2 )−1 , Imμ1 > 0, Imμ2 > 0, xm = P (x) rm (±1, x) dx + Q (x) hm (±1, x) dx, U

V (2)

(1)

r1 + ir2 = a1 (ψc ) Ω0 (±1, x) , h1 + ih2 = a1 (ψc ) Ω0 (±1, x) . The quadratic form (12.3) is strictly positively deﬁned. This follows from the positive sign of the principal minors d11 = 2ImαImμ1 > 0, d11 d22 − d212 = 2 4 |α| Imμ1 Imμ2 > 0. It should be also noted that, as follows from (12.2), for a ﬁxed crack can exist distributions that are diﬀerent from zero (named P (x) and Q (x)), for which the parameters of destruction in all tips of Lj cracks are equal to zero. In the sequel, such loads are excluded from our consideration. 12.1.2 Optimization Under the inﬂuence on the construction of mechanical loads or generally of ﬁelds of diﬀerent physical nature, all characteristics of the stress-strained state are functionals, deﬁned on a permissible set of external interactions. This enables us to put and solve a number of elementary optimization problems, which illustrate the possibility of control by destruction due to external ﬁelds.

12.1 Optimization of Fracture Characteristics

467

Let α± ij ≥ 0 are given. Let us consider the functional J (P, Q) =

n

(j)+ − (j)− α+ K + α K ij i ij i

(i = 1, 2) ,

(12.4)

j=1

(j)±

where Ki are determined in (12.2), J : M → R, M is the space of piecewise-continuous functions. Let us introduce the subspaces (A, B, C, D are given functions): MQ = {Q (x) ∈ M : 2C (x) ≤ Q (x) ≤ 2D (x) , x ∈ V }. Problem A1 Find a point P 0 , Q0 ∈ MP × MQ , such that |J (P, Q)| ≤ J P 0 , Q0 , ∀ (P, Q) ∈ MP × MQ . Solution. Taking into account (12.2), we write the functional J (P, Q) in the form (12.5) J (P, Q) = f (x) P (x) dx + g (x) Q (x) dx, U

V

where f (x) = g (x) =

n

(j) − (j) α+ ij fi (1, x) + αij fi (−1, x)

(i = 1, 2) ,

(j) − (j) α+ ij gi (1, x) + αij gi (−1, x)

(i = 1, 2) .

j=1 n

j=1

Let us introduce the functions P1 (x) = P (x) − (A + B) , |P1 (x)| ≤ B − A = B1 (x), Q1 (x) = Q (x) − (C + D) ,

|Q1 (x)| ≤ D − C = D1 (x) .

Evaluation of the left side of (12.5) gives |J| ≤ |γ| + B1 (x) |f (x)| dx + D1 (x) |g (x)| dx, U

where γ=

V

(A + B) f (x) dx +

U

(12.6)

(C + D) g (x) dx. V

The exact equality in (12.6) is attained on the functions P10 (x) = B1 (x) sign (γf (x)) ,Q01 (x) = D1 (x) sign (γg (x)). Consequently, the solution has the following form P 0 (x) = A (x) + B (x) + [B (x) − A (x)] × sign (γf (x)) 0

Q (x) = C (x) + D (x) + [D (x) − C (x)] × sign (γg (x))

(x ∈ U ) , (12.7) (x ∈ V ) .

468

12 Optimal Control

In case of symmetrical restrictions (A = −B, C = −D) in Chebyshev metric |P (x)| ≤ 2B, |Q (x)| ≤ 2D, we have P 0 (x) = 2B (x) signf (x) , Q0 (x) = 2D (x) sign g (x). Analogous considerations also hold in other functional spaces. Problem A2 Maximize |J (P, Q)| under the restrictions P Lp (U) ≤ I 1 ,

QLp (V ) ≤ I 2 ,

(p, p > 1) .

(12.8)

Solution. We to the right side of the inequal

apply the Holder inequality ity |J (P, Q)| ≤ |f (x)| |P (x)| dx + |g (x)| |Q (x)| dx [264]. We obtain U

V

|J (P, Q)| ≤ f Lq (U) I1 + gLq (V ) I2 −1 p + q −1 = 1, p−1 + q −1 = 1 .

(12.9)

We can easily conﬁrm that the exact equality is attained for the functions −q/p

q−1

P 0 (x) = I1 f Lq (U) |f |

sign f (x) ,

(12.10)

−q /p Q0 (x) = I2 gLq (U) |g|q −1 sign g (x) .

In this case restrictions (12.8) are satisﬁed. Consequently, functions (12.10) are extremal, and max |J (P, Q)| = J P 0 , Q0 is determined by the right side of the inequality (12.9). In the considered problems, the linear combination of the stress intensity factors on all cracks is maximized under deﬁnite restrictions on the control functions P (x) , Q (x). Let us consider below two versions of dual problem, in which the “energetic” expenditures on control are minimized when the linear combination (12.4) is given. Problem A3 Find (the constants γ, δ, c are given): ⎡ ⎤ min ⎣γ P 2 (x) dx + δ Q2 (x) dx⎦ (γ ≥ 0, δ ≥ 0) , (12.11) (P,Q)∈(I2 )

U

V

where (I2 ) = (P, Q) : P ∈ L2 (U ) , Q ∈ L2 (V ) , α + β = c , α = P (x) f (x)dx, U

Q (x) g(x)dx.

β= V

12.1 Optimization of Fracture Characteristics

469

Solution. Let us analyze L2 (U ) (L2 (V ), respectively) into the orthogonal sum of one-dimensional subspace with basis {f } ({g}, respectively) and its orthogonal complement. Then [124] P (x) = af (x) + h, 2

Q (x) = bg (x) + h∗ ,

2

(12.12)

∗

where a ||f | | + b ||g| | = c,

(f, h) = (g, h ) = 0,

2 2 2 2 μ (P, Q) = γ P + δ Q = γ a2 f + h +

2 2 2 2 +δ b2 g + h∗ ≥ γa2 f + δb2 g (· = ·L2 ) .

Hence follows that

min

(P,Q)∈(I2 )

μ (P, Q) = min Φ (a, b) , Φ (a, b) = μ (af, bg) ,

a ||f | |2 + b ||g| |2 = c. Thus, it is necessary to ﬁnd the minimum of the function with two variables Φ (a, b) under the restriction (12.12). The solution of this elementary problem takes the form min μ (P, Q) = μ P 0 , Q0 = γδc2 D, (12.13) (P,Q)∈(I2 )

P 0 (x) = cδDf (x)

(x ∈ U) ,

0

Q (x) = cγDg (x) (x ∈ V ) , −1 , ||f | | = ||f | |L2 (U) , ||g| | = ||g| |L2 (V ) . where D = δ ||f | |2 + γ ||g| |2 Problem A4 Find min {max [γ supU |P (x)| , δ supV |Q (x)|]} (γ, δ ≥ 0), (P,Q)∈(I∞ )

(I∞ ) = {(P, Q) : P ∈ L∞ (U ) , Q ∈ L∞ (V ) , α + β = c} , where γ, δ, c are given constants. Solution. The solution is done for the case c > 0. The magnitudes α and β are deﬁned in (12.11); Holder inequality in this case gives |α| ≤ ||P | |∞ ||f | |1 , |β| ≤ ||Q| |∞ ||g| |1 (||·| |∞ = ||·| |L∞ , ||·| |1 = ||·| |L1 ). Consequently, ν (P, Q) = max {γ P ∞ , δ Q∞ } ≥ max {γ1 |α| , δ1 |c − α|} = ν1 (α) , (12.14) where γ = γ1 ||f | |1 , δ = δ1 ||g| |1 . Function ν1 (α) ≥ 0 is piecewise-linear; therefore its minimum value must be attained in the point of inﬂection α0 , determined by the equality γ1 α0 = δ1 c − α0 . Here, two cases must be considered: γ1 = δ1 and γ1 = δ1 . After the appropriate analysis we come to the next result P 0 (x) = α0 sign f (x) f 1 , (12.15) 0 0 Q (x) = c − α sign g (x) g1 , −1 min ν (P, Q) = ν P 0 , Q0 = cγδ (δ f 1 + γ g1 ) , (P,Q)∈(I∞ )

470

12 Optimal Control

where α0 = cδ1 (δ1 + γ1 )−1 . We considered above the linear combination of the stress intensity factors, that did not give the possibility to control the destruction conditions in the tip of each crack. Meanwhile, special interest shows the creation, for example, of such conditions, when crack is “locked” in the tip. (j)+ (j)+ (j)− (j)− = λj , K2 = λn+j , K1 = λ2n+j , K2 = λ3n+j , We denote K1 (j)+ (j)+ (j)− (j)− = fj , f2 = fn+j , f1 = f2n+j , f2 = f3n+j (j = 1, 2, . . . , n) and f1 assume Q (x) = 0. Then formulas (12.2) can be represented in the form of the equations of connection λm = (P, fm ) (m = 1, 2, . . . , 4n). We assume that the system {fm } is linearly independent. Problem B1 Find min ||P | | on the set (I) = P : P ∈ L2 (U ), (P, fm ) = λm , m = 1, 2, . . . , 4n}. Its physical meaning is that we must ﬁnd such a control P (x), under which the stress intensity factors have given values λm . In this case the norm of control, which characterizes the energetic expenditures, must be minimum. Solution. Let us analyze L2 (U ) into the orthogonal sum of ﬁnitedimensional subspace with basis {fm } and its orthogonal complement. The following representation holds P (x) =

4n

cm fm (x) + h,

(h, fm ) = 0.

(12.16)

n=1

Substituting (12.16) in the equations of connection, we come to the system of linear equations with respect to the coeﬃcients cm : 4n

cm (fm , fk ) = λk

(k = 1, 2, . . . , 4n) .

(12.17)

m=1

This system has unique solution, since the Gram determinant is diﬀerent 2 2 2 from zero. Further, we have P = cm fm +h → min (m = 1, 2, . . . , 4n). Hence, we conclude that h = 0. Thus, the extremal element P 0 (x) is computed according to formula (12.16) with the coeﬃcients cm , deﬁned from the system (12.7). Under conditions of complex loading it is needed to optimize not the stress intesity factors, but the energy ﬂow into the tip of crack. Let us assume that P (x) ≡ 0 and that there is only one crack. Problem C1 Find max G (Q) on the set (I) == Q : Q ∈ L2 (V ) , ||Q| | ≤ Λ . Its physical meaning is that the maximization of energy ﬂow into one of the tips of the crack under the indicated restrictions on control. According to Kuhn -Takker theorem [289] at the saddle point 0Solution. Q , λ0 of Lagrange functional the following relations hold F Q0 , ϕ = 0, ∀ϕ ∈ L2 (V ) , λ0 Q0 − Λ = 0, λ0 ≥ 0, F (Q) = −G (Q) + λ (Q − Λ) .

12.1 Optimization of Fracture Characteristics

471

Here F (Q, ϕ) is the derivative according to Gateaux. Diﬀerentiating the functionals occurring in F (Q), using (12.3) and the arbitrariness of ϕ, we come to the relation (summation over the repetitive indices) dkm hm (1, x) xk − 1/2λQ (x) (A Q)−1 = 0 (k, m = 1, 2) .

(12.18)

Hence, follows the “energetic” equality max G = Adkm x0k x0m = 1/2λ0 Q0 .

(12.19)

In virtue of the strict positive deﬁniteness of the quadratic form (12.3), we conclude that λ0 > 0 and, may be |Q0 | = Λ. Equality (12.18) is equivalent to the integral equation with separated kernel Q (ξ)g (x, ξ) dξ − 1/2λQ (x)/(AΛ) = 0, g (x, ξ) = dkm hm (1, x) hk (1, ξ)

(k, m = 1, 2) ,

(12.20)

the solution of which is elementary. Eigenfunction Q0 (x), which corresponds to the positive characteristic number λ0 , is ﬁxed by restriction Q0 = Λ. The problems of the families Ai , Bi , Ci can be generalized in diﬀerent directions, bringing the statements closer to the actual conditions regulating the elements of the constructions. Let us examine the semi-inﬁnite plate from the boron-epoxy composite (BKM) with parameters μ1 = 0, 62i, μ2 = 5, 12i, weakened by arched crack ξ1 = R cos [0, 5 (1 + β) ϕ] , ξ2 = δ + R sin [0, 5 (1 + β) ϕ] , −1 ≤ β ≤ 1. In the ﬁrst case the coeﬃcient of intensity K1− is maximized, in the second K2− (on the lower tip of crack). In this case, control is accomplished only by a function P (x) , (|P (x)| ≤ I1 , Q (x) ≡ 0), or a function Q (x) , (|Q (x)| ≤ I2 , P (x) ≡ 0). If R = 1, δ = 0, 1, ϕ = π/3 and U, V = [0, 2], we obtain, in the ﬁrst case, P (x) = I1 (0 ≤ x ≤ 0, 9) , P (x) = −I1 (0, 9 < x ≤ 2) , Q (x) = −I2 (0 ≤ x ≤ 0, 3) , Q (x) = I2 (0, 3 < x ≤ 2). In the second case, P (x) has the same form, and Q (x) is determined by formula Q (x) = −I2 (0 ≤ x ≤ 0, 1; 1, 6 ≤ x ≤ 2) , Q (x) = I2 (0, 1 < x < 1, 6). Here the solution of the problem A1 was used, when n = 1 and for the corresponding values of the coeﬃcients α± ij . The following example is related to problem B1 . Let that in a half-plane from BKM a horizontal crack of length 2l = 2 exists at distance δ = 2 from the border. It is required, making use of the control P (x) with minimum norm, in the ﬁrst case to “lock” the crack at the left end K1− = K2− = 0 , and on the right end to obtain K1+ = 0, 5, K2+ = 0; in the second case, K1+ = K1− = 1, K2± = 0. The results are shown in Fig. 12.1. The upper diagram corresponds to the ﬁrst case, while the lower one to the second case.

472

12 Optimal Control

1

–1 2

Fig. 12.1. The examples under study

y b

0,5 δ 0 Q(x)/A

2

x

Fig. 12.2. The results for the third example

Finally, the third example is related to problem C1 . In the half-plane from BKM with arched crack, to maximize the energy ﬂow on the tip of crack b making use of Q (x), moreover, Q ≤ Λ. The results are given in Fig. 12.2. The obtained solutions illustrate the eﬀectiveness of control by the parameters of destruction due to the external ﬁelds.

12.2 Statement of Certain Optimization Problems In the previous chapters we considered a primal problem in electroelasticity, namely the determination of a critical parameter of fracture: the stress intensity factor. The solutions of extremal (inverse) problems in electroelasticity

12.2 Statement of Certain Optimization Problems

473

can be considerably simpliﬁed due to the fact that the parameters of fracture can be written as functionals, which are determined by the solutions of integral equations of the corresponding primal problems. Problem 1 Let in a piezoelectric halfspace a single crack, and on some portion Λ of the boundary of the halfspace a distributed loading q (x1 , t) = Re Q (x1 ) e−iωt acting (either shear forces, or electric charges). Then, using the results of Sect. 4.3, the stress intensity factor taking into account (4.51) may be represented in the form π ± |Ω0 (±1)| cos (ωt − arg Ω0 (±1)) , = ±cE KIII 44 s (±1) Ω0 (±1) = Q (x1 )Ω1 (±1, x1 ) dx1 . (12.21) Λ

Here, Ω1 (δ, x1 ) is the solution of integrodiﬀerential (4.49) using as right part (4.61) at P0 = Q0 = 1 (i.e. the “standard ” solution corresponding to the concentrated force or to the charge of a unit amplitude). We consider the following problem: ﬁnd a control law, bounded by Chebyshev metrics Q (x1 ) , |Q (x1 )| ≤ B (x1 ), such that the quantity |Ω0 | is maximized, with respect to any tip of the crack (for example, in tip b), i.e. |Ω0 (1)| → max,

|Q (x1 )| ≤ B (x1 ) ,

B (x1 ) > 0.

(12.22)

Solution of the simplest problem under symmetrical restrictions on the control norm (12.23) Q (x1 ) = B (x1 ) e−i arg Ω1 (1,x1 ) .

Where max |Ω0 (1)| =

B (x1 ) |Ω1 (1, x1 )| dx1 .

(12.24)

Λ

Problem 2 In the previous problem, as control we took a function characterizing tension distribution on boundary x2 = 0 -. Here we consider dynamic loading, and the control law is written as a function of the change of loading with time (evolutional control). Let a concentrated loading of form q (x1 , t) = Q (t) δ (x1 − x10 ) acting on the free from forces boundary of the piezoelectric halfspace with an inner crack. Let a time instance t = T and a function c (t) > 0. We seek to maximize |KIII | with respect to one of the tips of the crack at t = T at the expense of function Q (t) under the restriction |Q (t)| ≤ c (t). According to (4.71) appearing in Sect. 4.6, the above can be written as ∞ 1 ∗ −iωT → max, Q(ω)Ω |KIII (T )| = ±A (1, ω)e dω (12.25) 0 s (±1) −∞

|Q (t)| ≤ c (t) ,

c (t) > 0.

474

12 Optimal Control

Here A = 1, if by q (x1 , t) we imply concentrated force, and A = cE 44 /e15 , if q (x1 , t) are interpreted as a concentrated charge. ˆ (ω) (the Fourier transform of control To solve the above problem we use Q Q (t)) and substitute it into formula (12.25) to get ∞ A Q (t) R (T − t) dt , (12.26) |KIII (T )| = 2 πs (1) ∞ R (T − t) =

−∞

e−iω(T −t) Ω∗0 (1, ω) dω.

−∞

According to the results presented in Sect. 4.6 we get Im R (T − t) = 0. Therefore, the maximum value of (12.26) takes place on the element Q (t) = c (t) signR (T − t) and,

∞ A c(t)R(T − t)dt max |KIII (T)| = πs (1)

(12.27)

(12.28)

−∞

The indicated optimization problem of the stress intensity factor was considered under symmetric restrictions on the control loading. The above results may be somewhat generalized if we remove the restriction of the symmetry. Problem 3 |KIII (T )| → max,

A (t) ≤ Q (t) ≤ B (t) .

(12.29)

Here A (t) , B (t) are prescribed piecewise-continuous functions, the meaning of KIII (T ) and Q (t) follows from the preliminary problem. Introducing the change Q∗ (t) = Q (t) − [A (t) + B (t)]/2, we get a problem with symmetric restrictions |Q∗ (t)| ≤

B (t) − A (t) . 2

Hence, the ﬁnal solution reads 1 {A (t) + B (t) − [A (t) − B (t)] signγ (T ) signR (T − t)} , 2 ∞ 1 γ (T ) = [A (t) + B (t)] R (T − t) dt. (12.30) 2 Q (t) =

−∞

and

⎧ ⎫ ∞ ⎨ ⎬ A 1 max |KIII (T )| = [B (t) − A (t)] |R (T − t)| dt . |γ| + ⎭ 2 πs (1) ⎩ −∞

(12.31)

12.2 Statement of Certain Optimization Problems

475

To fulﬁll the initial conditions the functions A (t) , B (t) should be replaced by A (t) η (t) and B (t) η (t), where η (t) is the unit Heavyside function. Up to now we considered the problem of the maximization of the stress intensity factor on any tip of one of the cracks. In this case quantity KIII cannot be controlled on other tips. Do deal with that we consider the following optimal control problem: Problem 4 Let k-th cracks appearing in a half-space piezoelectric, which is bounded by vacuum and is free from forces everywhere except on some part of the boundary Λ. A distributed loading q (x1 , t) = Re {Q (x1 ) exp (−iωt)} acts on Λ. Here we assume that on the tips of all cracks the stress intensity factors KIII and the amplitudes of mechanical and electric quantities at characteristic points of a body have prescribed values at minimum “energetic” expenses on control: Q (x1 )L2 (Λ) → min (L2 is the complex Hilbert space [61] on set Λ). Due to (12.21) the factor KIII for the j-th crack reads

π (j) (j) (j) cos ωt − Ω (±1) (±1) , (12.32) KIII = ±cE Ω 44 0 s (±1) 0 (j) (j) j = 1, k . Ω0 (±1) = Q (x1 )Ω1 (±1, x1 ) dx1 Λ

The amplitudes of stress and of the components of the electric ﬁeld at the characteristic points zj j = 2k + 1, n are calculated with the help of formulas (4.29) and (4.48) and can be represented in the following way (12.33) Ψ (zj ) = Q (x1 )G (x1 , zj ) dx1 , Λ

where Ψ = {S13 , S23 , E1∗ , E2∗ , D1∗ , D2∗ } , G = Gm (x1 , zj ) , m = 1, 6 is the vector, the components of which are determined from the solution of a direct problem. The above can be written as ⎫1/2 ⎧ ⎬ ⎨ 2 |Q (x1 )| dx1 → min, (12.34) Q (x1 )L2 (Λ) = ⎭ ⎩ Λ

under the restriction of the equality types Q (x1 )Hj (x1 ) dx1 = αj

j = 1, n .

Λ

Here

⎧ (j) ⎪ ⎨ Ω1 (−1, x1 ) , Hj (x1 ) = Ω(j) 1 (1, x1 ) , ⎪ ⎩ G (x , z ) , m 1 j

j = 1, k j = k + 1, 2k j = 2k + 1, 6n

(12.35)

476

12 Optimal Control

The values of the quantities αj appearing in (12.35) are pre-assigned. To solve the above problem we introduce the subspace M with the basis ¯ j (x1 ) n into L2 . Each element Q ∈ L2 is represented in the form H j=1 p=

n

¯ m + h⊥ , cm H

(12.36)

m=1

where h⊥ belongs to the orthogonal addition M in relation to L2 . The constants cm are uniquely determined from equations of connection (12.35). We have n (Hj , Hm )cm = αj (12.37) j = 1, n . m=1

The determinant of system (12.37) (Gramm’s determinant) diﬀers from zero, therefore is has a unique solution. Due to the equalities 2 n ⊥ 2 ¯ H Q2 = c j j + h j=1 and to the arbitrary selection of the element h⊥ = 0, h⊥ = 0 (from condition (12.34)). Thus, the extremal element Q=

n

¯j , cj H

(12.38)

j=1

where cj are constants, determined from (12.37).

12.3 Control of the Parameters of Fracture in Piezoceramic Half-Plane with Cracks Let us consider a piezoceramic half-plane Ox1 x3 (x3 ≥ 0), polarized along x3 and weakened by a crack L. We assume that the half-plane borders with the vacuum and that in a certain portion of the boundary a distributed load {P (x) , Q (x)} or a distributed electric charge ρ (x) is given. The remaining part of the boundary is free from forces. The stress intensity factors are represented in the form [51, 282] ± (12.39) Ki = P (x) fi (±1, x) dx (i = 1, 2, 3) , U

fi (±1, x) = Im

3 k=1

Ri Ωk0 (±1, x),

12.3 Control of the Parameters of Fracture

477

where R1 = μ πs (±1)ak (ψ) γk , R2 = ± πs (±1)ak (ψ) (μk sin ψ + cos ψ) γk , R3 = μ πs (±1)ak (ψ) rk .μ The magnitudes γk , rk are given, and functions Ω0k (±1, x) are found as a result of the solution of the corresponding direct problem for a concentrated force (or charge), applied at point x ∈ U . The schemes for the solution of the problems considered below are indicated in Sect. 12.1. Let us point out here only the ﬁnal results. Figures 12.3 and 12.4 provide the distributions of the controlling load − → max, respectively, for straight crack P (x), whenever KI− → max or KII (x1 = β, x3 = 1/2, −1 ≤ β ≤ 1). Figure 12.5 shows the distribution of the − → max. controlling load Q (x) in [−1, 1] for vertical crack, whenever KII For second example let us take the solution of the problem A1 for the case, when on the forces-free and non-electrodized boundary of the half-plane controlling function is sought in the form of distributed electric charge. Let A (x) = 0, B (x) take the form indicated in Fig. 12.6, I (p) = KI− , and the crack is a horizontal segment x1 = β, x3 = 1/2. Figures 12.6 and 12.7 show the charge distribution for the case KI− → max. Finally, Fig. 12.8 give the distributions of the controlling loads P (x) and Q (x), respectively, for the problem B1 . Figure 12.8 corresponds to the case γ3+ = γ3− = 1, γ1± = γ2± = 0; Fig. 12.9 to the case γ2± = γ3± = 0, γ1+ = γ1− = 1. In this case, √ √ γ3± = λ± πlP d33 , γ1± = λ± πlP. (12.40) 3 1 The broken lines correspond to vertical, while the continual to horizontal crack.

x3 –

+

–1

1 +

x1

Fig. 12.3. The distribution of the control load

478

12 Optimal Control x3 +

–

1

– +

–1

x1

Fig. 12.4. The distribution of the control load x3

+

– – –1

1 +

x1

Fig. 12.5. The control load for a vertical crack x3

–

+

–1

1

x1

Fig. 12.6. The charge distribution for the problem x3

–

+

–2

0

x1

Fig. 12.7. The charge distribution for the problem x3

–0.1 –1

0.1

1

x1

Fig. 12.8. The control loads for problem B1

12.4 Control of the Stress Intensity Factor

479

12.4 Control of the Stress Intensity Factor in a Bimorph with an Interphase Crack Consider a piezoceramic bimorph with an interphase crack (Fig. 12.9). A static force Pm (δ) (m = 1, 3) or electric charges ρ (δ) act along the parabolic arc in the upper halfspace. The parametric equations of the parabola have the form x1 = p1 δ, x3 = d + pδ 2 , δ ∈ [−1, 1]. According to the results of Sect. 3.6, the stress intensity factors on the tips of an interphase crack are given by Kj± =

Λ ± Kj ah

(j = 1, 2)

(12.41)

where Kj± are determined from (3.76), (3.77), and the quantity Λ is the amplitude of acting static forces or charges.

x3 1

x1

O

–A

2

a

Fig. 12.9. The scheme of a bimorph with an interphase crack 7.00 P1 BaTiO3 PZT-5

4.15

1.30 1 2 –1.55

5

3 4

–4.40 –1.0

δ –0.5

0.0

0.5

1.0

Fig. 12.10. Optimal control function P1 (δ) (α1 = 0, α2 = 0, α3 = 0, 01, α4 = 0, 01)

480

12 Optimal Control

ρ 5

2 4 3

0

2 1

–2

–4 –1.0

–0.5

0.0

0.5

δ

Fig. 12.11. Optimal control function p(δ) (α1 = 0, α2 = 0, α3 = 0, 01, α4 = 0, 01) P3

0.45

0.00 1 2 –0.45

3 4 5

–0.90 –1.0

–0.5

0.0

0.5

δ

Fig. 12.12. Optimal control function P3 (δ) (α1 = 0, α2 = 0, α3 = 0, 01, α4 = 0, 01)

In the case where the loading is distributed along some arc L with intensity Λ (δ) (δ is the parameter),the factors Kj± (taking into account (12.41)) read 1 Kj± = Λ (δ) Kj± (δ) ds, (12.42) ah L

where ds is the element of the arc- length of contour L. For the optimal control problem we assign the values of the quantities Kj± (j = 1, 2), and we ask for the norm of the function Λ (δ) in Hilbert space L2 to be minimal. According to the results presented in Sect. 12.2, the optimal control law reads

12.4 Control of the Stress Intensity Factor 1.30

481

P1

0.65 1

0.00

2

3 –0.65 4 5 –1.30 –1.0

δ –0.5

0.0

0.5

1.0

Fig. 12.13. Optimal control function P1 (δ) (α1 = 0, 01, α2 = 0, 01, α3 = 0, α4 = 0) 10.0

ρ 5

1.5

4

1

2 –7.0 3

–15.5

–24.0 –1.0

–0.5

0.0

0.5

δ

Fig. 12.14. Optimal control function ρ(δ) (α1 = 0, 01, α2 = 0, 01, α3 = 0, α4 = 0)

s (δ) + c1 K1 + c2 K1− + c3 K2+ + c4 K2− (12.43) ah The factors cm m = 1, 4 are determined from the system of linear algebraic equations, which is obtained as a result of substitution of expression (12.43) into the moment (12.42). Figures 12.10–12.15 show the function of optimal control Λ (δ) for various types of loading; the curves with number m in Figs. 12.10–12.12 are constructed for p1 /a = 3, d/a = 2, p/a = −1.8 + 0.9(m − 1), and − − a1 = ahKI+ = 0, a2 = ahKI− = 0, a3 = ahKII = 0.01, a4 = ahKII = 0.01; in Figs. 12.13–12.15 for a1 = 0.01, a2 = 0.01, a3 = a4 = 0. Λ (δ) =

482

12 Optimal Control 0.350 4 5 3

P3

2 0.205

1

0.060

–0.085

–0.230 –1.0

–0.5

0.0

0.5

δ

Fig. 12.15. Optimal control function P3 (δ) (α1 = 0, 01, α2 = 0, 01, α3 = 0, α4 = 0)

12.5 On the Application of the General Problem of Moments to Certain Optimization Problems of the Theory of Elasticity 12.5.1 Statement of the Problems For subject of our study we take the elastic half-plane y ≥ 0, weakened by stress concentrators (crack, openings, inclusions). On the border of the halfplane we distinguish the sets U and V , on which act normal P (x) and tangential Q (x) loads, respectively. Let us call these loads controlling. Under the term objects of control we would understand certain functionals, responsible for the stressed state and the strength of the body. This can be the stress concentration on the openings, the coeﬃcients of intensity of stresses in the apexes of defects, the stressed state at some characteristic points or lines, the moments of stresses of diﬀerent nature etc. Depending on the nature of the optimization problem, the control (P, Q) must be selected from certain functional class. We state the optimization problems for half-plane with stress concentrators [60]. We should note from the beginning that the problem of moments in arbitrary Banach space [264] is stated as problem of ﬁnding a linear continuous functional Φ ∈ B ∗ , such that Φ (ϕk ) = ck

(k = 1, 2, . . . , n) ,

where ϕk ∈ B and the constants ck are given.

ΦB ∗ → min,

(12.44)

12.5 Application of the General Problem of Moments

483

It is known that this problem is always solvable (Hahn-Banach theorem [264]) for ﬁnite n; however, no eﬀective procedure is known for ﬁnding the extremal functional in the general case. If the functional is required to be non-negative (i.e. the functional is required to assume non-negative values on the intersection of certain cone in B and the linear closure of elements ϕk ), then we come to the classical problem of moments [7]. In this case, obviously, the existence of functional Φ : Φ (ϕk ) = ck (k = 1, 2, . . . , n) cannot be guaranteed; so it is required for the concrete space B and the concrete set of elements {ϕk }nk=1 to ﬁnd a criterion of solvability. Sometimes, the necessary assertions are deducible from the general theorems of solvability [7, 89], but usually they are independent part of the theory. The problem (12.44) is called the l-problem of moments, while the problem of seeking for a non-negative functional Φ, the classical problem of moments. A more complicated version of the problem of moments is obtained by replacement of the exact equalities (12.44) by the following condition: if C is n certain n-dimensional parallelepiped, then it is required that {Φ (ϕk )}k=1 ∈ C. In particular, |Φ (ϕk ) − ck | ≤ εk (k = 1, 2, . . . , n). Let us assume that B = C (U ) is the space of continuous functions, given on the compact set U ⊂ R. Riesz theorem [261] gives the general form of the linear continuous functional Φ on C (U ) (12.45) Φ (ϕ) = ϕ (x) dσ (x), ΦC ∗ = var σ (x) , x∈U

U

and for positive functional (the cone consists of all non-negative on U functions) the requirement is added that σ (x) is a function not decreasing on U . In this case, since the number of moment functions (n < +∞) is ﬁnite, the step-functions are optimal, in other words (in the sense of the generalized functions): σ (x) =

m

ρj δ (x − xj )

(m < +∞, xj ∈ U ) .

(12.46)

j=1

In the classical problem of moments condition ρj > 0 is added and one can additionally require that the solution (certainly, in the case that the problem of moments is solvable) had minimum total variation ρj , which has a physical sense. Let us state the problem about concentrated boundary control, when P (x) = σ (x) (x ∈ U ) , Q (x) = τ (x) (x ∈ V ). In the form of problems of moments, problem 1 (the classical problem of moments) is formulated as follows: k = 1, n , ϕk (x) dσ (x) + ψk (x) dτ (x) = ck (12.47) U

where dσ (x) ≥ 0,

V

dτ (x) ≥ 0, var σ (x) + var τ (x) → min.

484

12 Optimal Control

Problem 1, consists, in fact, in the search for concentrated boundary stresses of one type (ρj > 0), which lead to given stressed state in the controlled domains. Problem 2 (the l-problem of moments) is formulated as follows: >

dσ (x)< 0,

>

dτ (x)< 0,

var σ (x) + var τ (x) → min .

(12.48)

In the sequel, we put dτ (x) ≡ 0. Actually, it is not diﬃcult to show that the general problem (dσ (x) ≡ 0, dτ (x) ≡ 0) is equivalent to the problem of moments on the set U ∪ V relative to moment functions fk : fk (x) := ϕk (x) (x ∈ U − V ) , fk (x) := ϕk (x) + ψk (x) (x ∈ U ∩ V ) , fk (x) := ψk (x) (x ∈ V − U ). Furthermore, in the case of solvability of this new problem of moments we have freedom in the choice of functions σ (x) , τ (x) on the set U ∩ V with ﬁxed sum σ (x) + τ (x). 12.5.2 Approximational Approach For the above-indicated class of problems of mechanics the moment functions ϕk (x) are linear combinations of certain standard solutions of integral equations of the corresponding boundary-value problems [59] and can be found numerically on the system of points U from U . In order to keep on the analytical approach to the problems of control, we can approximate the moment functions ϕk (x) on U in other one or another way, for example, by ordinary polynomials. Let that the degree of the approximating function ϕk (x) of the polynomial Rk (x) is designated by nk . The polynomials with minimal deviation from ϕk (x) in Chebyshev metric, i.e. in the space C (U ) [261] are the best, from the view point of minimization of the absolute error in approximation. Further, we put (12.49) sν = xν dσ (x), U

where sν is the ν-th degree moment of the distribution σ (x). The relations k = 1, n ϕk (x) dσ (x) = ck

(12.50)

U

take the form of linear connections for exponential moments nk

aνk sν = ck

k = 1, n .

(12.51)

ν=0

Thus, disregarding the error in the approximation, the original problem is equivalent to the following one: to ﬁnd the conditions for numbers ck , under which a non-decreasing function bounded by the variation σ (x) exists (the

12.5 Application of the General Problem of Moments

485

function of load distribution on the border of the half-plane) with moments sν , which satisfy the system of (12.51). If we seek for approximating polynomials Rk (x) such that max {nk } = N would coincide with the number of equations in (12.51), then the exponential moments sν are uniquely determined and the problem is reduced to the determination of the necessary and suﬃcient conditions of solvability of the classical exponential problem of moments [7, 89] on the set U . Further investigation depends substantially on the form of the sets U , on which σ (x) are given. If U = (−∞, ∞), then by the necessary and suﬃcient condition on the existence of measure σ (x) with given moments ∞ sν =

xν dσ (x)

(ν = 0, 1, 2, . . . , N)

(12.52)

−∞

is the requirement that the quadratic form is not negative (Hankel form). (N /2)

sα+β ξα ξβ .

(12.53)

α,β=0

In case of certain localization of the application of generalized forces on the border of the body we can use the results [89, 268]. Thus, if it σ (x) is concentrated on certain [a, b] and N is odd number, then necessary and suﬃcient condition of solvability of the problem is the two quadratic forms (N −1)/2

(N −1)/2

(sα+β+1 − asα+β ) ξα ξβ ,

α,β=0

(bsα+β − sα+β+1 ) ξα ξβ .

(12.54)

α,β=0

to be non-negative. The requirement that the quadratic forms must be not negative appears as a result of application of the general M. Riesz criterion (the cone of the space B consists of non-negative continuous functions) and the representation of the non-negative on U polynomial. Thus, it is known that P (x) ≥ 0 (x ∈ (−∞, ∞)) ⇔ P (x) = [A (x)]2 + [B (x)]2 ,

(12.55)

2 deg A (x) ≤ deg P (x) , If A (x) =

2 deg B (x) ≤ deg P (x) .

ξα xα , then [A (x)]2 = ξα ξβ xα+β and Φ [A (x)]2

=

sα+β ξα ξβ . If, for example, U = [a, b], then for deg P (x) = N (where N is odd number) Lucas theorem holds [7] 2

2

P (x) ≥ 0 (x ∈ [a, b]) ⇔ P (x) = (x − a) [A (x)] + (b − x) [B (x)] . (12.56) Hence follow the quadratic forms (12.54). The case for even N is analogous.

486

12 Optimal Control

It is noteworthy that the requirement that the quadratic form must be non-negative is equivalent to the requirement that the principal minors of the matrix of the quadratic form must be non-negative. When the problem of moments is solvable a function σ (x) exists; it has ﬁnite number of jumps ρk at the points xk ∈ U : P (x) = σ (x) = ρk δ (x − xk ) (ρk > 0) . (12.57) If U is the union of mutually disjoint segments [aν , bν ], then the situation is somewhat complicated, but the points of jumps xk and the magnitudes of jumps ρk are found by a completely eﬀective and suﬃciently elementary method [268]. Thus, the program of solution of the stated problem consists of the following steps. Firstly, with the application of numerical methods we ﬁnd the solution of the direct problem about the stressed state and the moment functions are formed. Secondly, the approximation of the moment functions is done by (in particular) polynomials. On the grounds of the investigation of the exponential (in particular) problem of moments one can conclude about the solvability or non-solvability of the given stressed state in the controlled domain. The approximational approach introduces a certain error into the values n of the magnitudes of the controlled parameters {sk }k=1 . Let us estimate this error. Let ϕk (x) = Rk (x) + εk (x) , ε := max max |εk (x)| : x ∈ U, k = 1, n , and σ ∗ (x) a certain solution of the exponential problem of moments (12.49). Then, it is obvious that ϕk (x) dσ ∗ (x) − sk ≤ εV arσ ∗ (x) = εs0 . (12.58) U

Consequently, the approximation of the moment functions and the introduced in this way error can change the original values of the parameters no more than on εs0 . Let us consider in greater detail the optimization problem of the coeﬃcients of intensity of stresses in anisotropic half-plane, weakened by internal crack L. Let that the border of the half-plane is forces-free, except the section U , on which acts the normal load P (x), and the edges of the sections are free from forces. The function P (x) is generalized function, particularly, P (x) dx = dσ (x), where σ (x) is the function of bounded variation. In accordance with the aforesaid, let us consider two situations. In the > ﬁrst situation, dσ (x) ≥ 0, whilein the second dσ (x)< 0. According to [269],

12.5 Application of the General Problem of Moments

487

the coeﬃcients of intensity are linear functionals ⎧ ⎫ ! " ⎨ ⎬ ¯1 μ ¯2 − μ KI± = μ2 πs (±1) × Im a ¯1 (ψc ) a2 (ψc ) Ω0 (±1, x) dσ (x) , ⎩ ⎭ μ2 − μ ¯2 U

(12.59) ak (ψc ) = μk cos ψc − sin ψc , ψc = ψ (β)|β=±1 (k = 1, 2) , where U is the subset from (−∞, ∞), on which σ (x) is deﬁned; β is the parameter in the equation of the section x = x (β) , y = y (β) , |β| ≤ 1. Values β = ±1 correspond to the ends of the crack, ψ is the angle between the positive normal to the left edge and the axis Ox1 . The stress intensity ± is given by formula (12.59), in which it was used a2 (ψc + π/2) factor KII instead of a2 (ψc ). Function Ω0 (β, x) is the solution of the integral equations system 1 −1

¯ 0 (β, x) H∗ (β, β0 ) Ω0 (β, x) H (β, β0 ) + Ω dβ 1 − β2 1 + −1

1 −1

Ω0 (β, x) dβ = N (β0 , x) , 1 − β2

(β − β0 )

(12.60)

Ω0 (β, x) t1 (β) dβ = 0, 1 − β2

where

# (t¯2 − t¯20 ) (t1 − t10 ) 1 d ln H (β, β0 ) = 2 2 dβ (β − β0 ) (t1 − t¯20 ) (t¯2 − t10 ) 2 $ μ1 − μ ¯2 (t1 − t¯20 ) (t2 − t¯10 ) ln + t (β) , μ1 − μ2 (t2 − t¯20 ) (t1 − t¯10 ) 1 % $ μ ¯1 − μ2 d (t¯2 − t¯20 ) (t¯1 − t10 ) (t2 − t¯10 ) H∗ (β, β0 ) = × ln ¯ t (β) , 2 (μ1 − μ2 ) dβ (t1 − t¯10 ) (t¯2 − t10 ) (t2 − t¯20 ) 1 # μ2 dt10 /dβ0 μ ¯1 (μ2 − μ ¯2 ) 1 − N (β0 , x) = 2 4 μ1 − μ2 t10 − x |μ1 − μ2 | & ¯ 2 (¯ μ1 − μ2 ) dt¯10 /dβ0 dt20 /dβ0 μ − . × 2 t¯20 − x t¯10 − x |μ1 − μ2 |

For the approximate-analytical solution of the system (12.39) we apply −1/2 Gauss quadrature formulas with n nodes with respectto weight 1 − β 2 .

488

12 Optimal Control

We get n n ' π Ω0 (βν , x) π ¯ 0 (βν , x) + [H (βν , β0 ) Ω0 (βν , x) + H∗ (βν , β0 ) Ω n ν=1 βν − β0 n ν=1

= N (β0 , x) ,

(12.61)

n

π Ω0 (βν , x) t1 (βν ) = 0, n ν=1 where

2ν − 1 π. 2n We take the values β0 = β0μ = cos (μπ/n) (μ = 1, 2, . . . , n − 1) for collocation points in (12.61). The obtained system of linear equations enables us to represent approximately the values Ω0 (βν , x) in the form of linear combinations of functions N (β0μ , x). The optimization problem can be formulated in the following way: let ± ± that the desired values of the stress intensity factors KI,0 , KII,0 in the ± ± tips of crack L are given. In the general case the “domain” KI − KI,0 ≤ ± ± ± ± ± ± ε1 , KII − KII,0 ≤ ε2 for the stress intensity factors KI , KII are given. The external action dσ (x), which enables to control the values of the coeﬃcients of intensity, is found from the minimal condition of the total impulse Var σ (x) → min. Each of the problem of moments takes the form (we assume ε± i = 0 for reasons of abbreviation) ± ± ϕ± (x) dσ (x) = K , ϕ± (12.62) 1 2 (x) dσ (x) = KII , I βν = cos θν ,

U

θν =

U

" ¯1 μ2 − μ (±1)Im a where ϕ± (x) = μ2 πs ¯ (ψ ) a (ψ ) Ω (±1, x) , 1 c 2 c 0 1 μ2 − μ ¯2 ϕ± 2

!

"

( ¯1 π μ2 − μ × (x) = μ2 πs (±1)Im a ¯1 (ψc ) a2 ψc + Ω0 (±1, x) 2 μ2 − μ ¯2

and Ω0 (±1, x) are calculated according to the Gauss method as the values of the interpolation polynomial ) * n 2ν − 1 π 1 ν+r π + ρ± (−1) ± Ω0 (βν , x) tg Ω0 (±1, x) = , (12.63) n ν=1 4n 2 r+ = 1,

r− = n,

ρ+ = π/2,

ρ− = 0.

The moment functions ϕ± i (x) (i = 1, 2) are approximated by polynomials of third degree 3 Pj± (x) = ak (±1, j) xk . (12.64) k=0

12.5 Application of the General Problem of Moments

489

The more exact representation (12.64) is, the “less” set U is. Let us substitute for functions ϕ their approximate representation (12.64) and from the obtained system of linear equations we ﬁnd the exponential moments

sν = xν dσ (x) (ν = 0, 1, 2, 3). U

If U = [a, b], then we can decide about the solvability of problem 1 (version of the classical problem of moments) by using criterion (12.54), which is utterly constructive. The question about ﬁnding at least one extremal solution

σ (x) remains unanswered. We should note, ﬁrst of all, that var σ (x) = dσ (x) = s0 . This means that the approximation approach enU

ables us to ﬁnd immediately the optimal value of the total impulse Var σ (x). In order to ﬁnd the values of pulses ρk and the points of their application xk ∈ U (see (12.57)), we can use the following algorithm [7, 89]. The sequence 3 of moments {sk }k=0 is supplemented with the moment s4 , so that the sequence 4 {sk }k=0 was singularly positive with respect to set U . After the determination of moment s4 it is necessary to built in the ordinary way the system of orthogonal polynomials j (x) of degree j (j = 0, 1, 2) relative to the non-negative P functional I : I xk = sk (k = 0, 1, . . . , 4). In [7, 89] elementary evident formulas are given for the system of polynomials Pj (x). Having chosen the number λ, so that among the roots of the polynomial Q (x, λ) := P2 (x) + λP1 (x) were the ends of the interval U = [a, b] (in [89] in the terms of the index of representation (12.57) the overall situation is studied), and ﬁnding all the roots of the polynomial Q (x, λ), we obtain the entire set of points {xk } from (12.57). The magnitudes of jumps are deﬁned in that case as the values of the functional I on a specially constructed non-negative polynomial or as the solution of the system of linear equations ρi xjk = sk (k = 0, 1, 2, 3). In problem 2, with the aid of the approximational approach we come to the exponential l–problem of moments, the complete algorithm of solution of which with the determination of the points xk and the magnitudes ρk is exposed in [89]. Based on the example of the half-plane y ≥ 0 we illustrate what we have exposed above [269]. Let that the internal crack is rectilinear, |x| ≤ 0, 2, y = 1, and the boron-epoxy half-plane has characteristics μ1 = 5, 12i, μ2 = 0, 52i. On a portion of the boundary |x| ≤ 0, 1, loads dσ (x) ≥ 0 are allowed. We give the symmetrical values of the stress intensity factors KI+ , KI− = + − + , KII = KII . −KI+ , KII Disregarding the very bulky values for the moment functions ϕ± ν (x), where Kν±

0,1 =

ϕ± ν (x) dσ (x)

+ (ν = 1, 2) ; ϕ− 1 (x) = −ϕ1 (x) ,

+ ϕ− 2 (x) = ϕ2 (x) ,

−0,1

(12.65) R1+

(x) = 0, 3077 + 0, 2470x − −0, 8855x2 + we give their approximations: + 3 0, 5765x ; R2 (x) = −0, 1371 + 1, 2887x + 1, 1549x2 + +0, 5114x3 with the

490

12 Optimal Control

relative errors δ1 = 0, 15%, δ2 = 0, 4%, respectively. Applying the criterion of solvability of the exponential problem of moments on [−0, 1; 0, 1], we obtain that for K1± = ±0, 3000, K2± = −0, 1250 there exists generalized load dσ (x) = 0, 5 × [δ (x + 0, 1) + δ (x − 0, 1)]. For K1± = ±0, 3034, K2± = −0, 1313 exists a generalized load dσ (x) = 0, 5 × × [(x − 0, 0707) + δ (x − 0, 0707)], exists, whereas for K1± = ±0, 2192, K2± = −0, 0216 no loads dσ (x) ≥ 0 exist in the portion [−0, 1; 0, 1]

12.6 Pulse Boundary Control of the Stressed State of the Half-Plane We study below the conditions for the existence of boundary control of the form ρν δ (x − xν ) (δ (·) − is the delta function, ρν > 0), which realize the possibility of accessibility of the given elastic mode in the half-plane y > 0. We ﬁnd the necessary and suﬃcient conditions of solvability of the problem in the terms of nonnegativity of the quadratic forms. The solution is based on certain integral representations of special classes of analytic functions. We examine the examples [275]. 12.6.1 Statement of the Problem Let us consider the elastic anisotropic half-plane x2 > 0, at the points of the set F of which are given the values of stresses σ11 , σ22 , σ12 . The problem about the choice of the normal and tangential forces N (x) , T (x) (x1 ∈ E ⊂ R), on the border x2 = 0 is posed, so that at the points of the set F the values (σ11 , σ22 , σ12 ) would coincide with those given beforehand. Speciﬁcally, the necessary and suﬃcient conditions of solvability of this problem are needed. R. Nevalinna functional classes [7, 89, 265]. The function f (z) belongs to class R, if: a) f (z) is holomorphic in the upper half-plane; b) Imf (z) ≥ 0, when Imz ≥ 0. The following theorem gives the integral representation of the functions of class R. Theorem A (R. Nevalinna) A necessary and suﬃcient condition for the function f (z) to belong to class f (z) is to admit the following additive representation: 1 f (z) = μz + ν + π

∞ ) −∞

1 t − t−z 1 + t2

* dτ (t),

(12.66)

where μ, ν are real numbers; μ ≥ 0, τ (t) is non-decreasing function with −1

∞ dτ (t), or that f (z) admitsrepresentation 1 + t2 convergent integral −∞

12.6 Pulse Boundary Control of the Stressed State

491

(with the same μ, ν) f (z) = μz + ν +

1 π

∞ −∞

1 + tz dσ (t), t−z

(12.67)

where σ (t) is non-decreasing function of bounded variation on (−∞, ∞). If function τ (t) from (12.66) is normed by conditions τ (t) = 1/2 [τ (t + 0) +τ (t − 0)] , τ (0) = 0, then it is uniquely determined by the R–function f (z) and the conversion formula holds (Perron-Stieltjes) t τ (t) = lim+ ε→0

Im f (τ + iε) dτ

(12.68)

0

Furthermore, it is known that the function yImf (iy) does not decrease on (0, +∞), but if μ = 0 in (12.66), then ∞ dτ (t) = lim [yIm f (iy)] . y→+∞

−∞

(12.69)

Both parts of this equality can be inﬁnite. The function f (z) belongs to class R [a, b] [7], if: a) f (z) ∈ R; b) f (z) is holomorphic and positive in (−∞, a), holomorphic and negative in (b, +∞). Theorem B A necessary and suﬃcient condition for the function f (z) to belong to

b class R [a, b] is to admit the representation f (z) = dσ (t) / (t − z), where a

σ (t) is bounded non-decreasing function. Before proceeding to the concept of interpolation problem in the class R, let us elucidate the terminological conventions. The quadratic form n

cαβ ξα ξ¯β

(cαβ ∈ C, c−α = c¯α )

(12.70)

α,β=1 2

is called positive, if the form assumes only positive values whenever |ξ1 | +. . .+ |ξn |2 = 0. If one can ﬁnd simultaneously ξα that are not equal to zero, so that the quadratic form, in the general case, preserving sign, nevertheless tends to zero, then it is called singular. The terms “positive form,” and “singular form” are brought to the common name “non-negative from.”

492

12 Optimal Control

Let that certain numerical sets Fz and Fw from the upper half-planes Imz > 0, Imw > 0 are given and a deﬁnite mapping Fz zα → wα ∈ Fw . The Nevanlinna-Pick interpolation problem in the class R consists in the ﬁnding of the conditions for the existence of the function f ∈ R such, that f (zα ) = wα

∀zα ∈ Fα .

(12.71)

Theorem C 1. For the existence of the function f (z) ∈ R, which satisﬁes (12.71), it is necessary and suﬃcient all quadratic forms n wkα − w ¯kβ ¯ ξα ξβ zkα − z¯kβ

(12.72)

α,β=1

not to be negative for any ﬁnite sets {zkα } ⊂ Fz . 2. If Fz = {z0 , z1 , . . . , zn , n < +∞}, then it is possible to conﬁne ourselves only to one quadratic form n wα − w ¯β ¯ ξα ξβ . zα − z¯β

(12.73)

α,β=1

3. For the existence of a function f (z) ∈ R [a, b] that is satisfying (12.71), it is necessary and suﬃcient that in R were solvable the two interpolation problems: f1 (zα ) = (zα − a) wα ; f2 (zα ) = (b − zα ) wα , f1 , f2 ∈ R. 4. If any of the forms (12.72) is singular, then the function f (z) is uniquely determined and the function σ (t) corresponding to it is a function of jumps with ﬁnite number of jumps. 12.6.2 Control of Elastic State Let us examine the elastic anisotropic half-plane (plate of thickness h) y ≥ 0 and the set F = z (α) α∈A of points of the open half-plane y > 0 (A is Let at the points of the set F the values of stresses the set of indices). (α)

(α)

(α)

σ11 , σ22 , σ12 are given. The problem consists of ﬁnding the conditions, under which normal N (x) and tangent T (x) loads exist on the border of the half-plane, which lead at the points of the set F to the given beforehand values (α) (α) (α) of stresses σ11 , σ22 , σ12 . We would seek for N (x) , T (x) in the class of generalized functions of the form N (x) = ρν δ (x − xν ), ρν > 0, −∞ < xν < ∞. (12.74)

The relations, which express stresses in the half-plane through the analytic functions Φν (zν ) (ν = 1, 2) hold.

12.6 Pulse Boundary Control of the Stressed State

493

(α) (α) (α) = aj + ibj , + μj y (α) , Φj zj

(α)

Let us assume that zj = x(α)

(α) (α) aj , bj ∈ R . We consider (for simpliﬁcation of the computations) that (α)

μj = iνj (νj ∈ R) ; aj (α) aj (α)

and bj

j+1

= (−1)

are uniquely deﬁned: (α)

#

(α)

σ11 + νj2∗ σ22 , 2 (ν22 − ν12 )

j∗ =

2 (j = 1) , 1 (j = 2) ,

(12.75)

is connected with the dependence (α)

ν1 b1

(α)

(α)

+ ν2 b2

= 1/2σ12 .

(12.76)

In [266] the following relations are established 1 Φ1 (z1 ) = 2πih (μ1 − μ2 ) Φ2 (z2 ) =

1 2πih (μ2 − μ1 )

∞ −∞ ∞

−∞

μ2 N (ξ) + T (ξ) dξ, ξ − z1

(12.77)

μ1 N (ξ) + T (ξ) dξ, ξ − z2

where N (x) , T (x) are the normal and tangential loads on the border y = 0. For given set F , let F1 , F2 the corresponding sets of points {zj = x + μj y : x + iy ∈ F }. We assume for simplicity that F1 ∩ F2 = Ø, and consider the case ofabsence of tangential load (T (x) ≡ 0). Further, let G = F1 ∪ F2 , Gw = (α)

wj

α∈A

, where (α)

wj

j

= (−1) 2πih

ν2 − ν1 (α) (α) aj + ibj . νj ∗

(12.78)

The control problem stated above can be formulated as problem of moments [7, 89, 239]: to ﬁnd the conditions for the existence of non-decreasing function σ (x) (dσ (x) = N (x) dx) of bounded variation (measure), such that (α) wj

∞ = −∞

dσ (ξ) ξ−

(α) zj

,

(α)

zj

∈ G.

(12.79)

The conditions of solvability of the control problem with respect to the ﬁnite set F are indicated in Theorem 1. Theorem 1. (α) (α) (α) We put z2α−1 := z1 , 1 ≤ j, k ≤ M , w2α−1 := w1 , w2α := w2 . For the solvability of the control problem of boundary generalized load N (x) of the form (12.74) it is necessary and suﬃcient that existed such values (α) bj , for which the quadratic form (12.73) would be non-negative, where (N (x) dx = dσ (x)) [a, b] ⊂ R.

494

12 Optimal Control

Proof. 1. If the problem is solvable, then a normal load N (x) exists from the class of diﬀerentiated measures, such that at every point −∞< a ≤ x ≤ b < +∞ (α) (α) (α) the stresses assumed the given values σ11 , σ22 , σ12 . Consequently, the (α) (α) (α) values Φj (zj ), found from (12.77), are connected with σ11 , σ22 , σ12 via the formulas (12.75). Thus, for the existing function σ (x) the relations (12.79) hold. 2. Let the form (12.73) is non-negative. According to theorem C a function Φ (z) ∈ R exists ∞ 1 + tz dτ (t), dτ (t) ≥ 0, (12.80) Φ (z) = μz + ν + t−z −∞

which gives the solution of the interpolation problem Φ (zα ) = Wa . Since the function τ (t) can be chosen concentrated on the bounded set of the

∞ real axis, then 1 + t2 dτ (t) < ∞. −∞

Following the note [7, p. 118], let us assume t σ (t) =

∞

1 + ν 2 dτ (ν), μ = 0,

ν=

−∞

−∞

t dσ (t), 1 + t2

(12.81)

hence ∞ Φ (z) = −∞ ∞

=

dσ (u) , u−z dσ (t) (α)

−∞

t − zj

dσ (u) ≥ 0,

var σ < ∞,

(α)

wj

(α) = Φ zj

,

(12.82)

and the interpolation problem (12.79) is solvable, and a fortiori the stated problem. 12.6.3 Examples 1. Let z1 = x + iν1 y the set F consists of one point z = x + iy, y > 0. Then, z2 = x + iν2 y. Let ν2 > ν1 , and the stress tensor at the point z such that: σ11 , σ22 = sσ11 , σ12 = 0 (s ∈ R). According to formulas (12.75), (12.79) we ﬁnd a1 = σ11 β2 ,

a2 = −σ11 β1 ,

w1 = A (b1 − iσ11 β2 ) , βj =

1 + sνj2 , 2 (ν22 − ν12 )

b2 = −κb1 , w2 = A b1 − iAσ11 β1 κ−1 ,

κ = ν1 /ν2 ,

A = 2πh (1 − κ) .

(12.83)

12.6 Pulse Boundary Control of the Stressed State

The quadratic form (12.73) has the form ! " w1 − w w1 − w ¯1 ¯2 ¯ ¯2 w2 − w 2 2 |ξ1 | + 2Re ξ1 ξ2 + |ξ2 | z1 − z¯1 z1 − z¯2 z2 − z¯2 + Aσ11 ( 2 2 |ξ1 + ξ1 | + s |ν2 ξ1 + ν1 ξ2 | . =− ν1 y

495

(12.84)

If s < 0, then the quadratic form cannot contain constant sign. If s ≥ 0, σ11 < 0, then the conditions of theorem 1 are satisﬁed and the control N (x) from class (12.74) is possible. However, the elementary control N (u) = ρδ (u − x) , x ∈ R, ρ > 0 is impossible. Indeed, in this case ρ = Ab1 − iAσ11 β2 , x1 − x − iν1 y and then

ρ (x1 − x) 2

(x1 − x) +

ν12 y 2

=

ρ = Ab1 − iAσ11 β1 κ−1 x1 − x − iν2 y (12.85) ρ (x1 − x) 2

(x1 − x) + ν22 y 2

= b1 ,

(12.86)

which is possible only when x1 = x, b1 = 0. But in this case, ρ = −Aσ11 β2 ν1 y = −Aσ11 β1 ν2 yκ−1 , whence follows that ν1 = ν2 . Let us consider now the function N (x) = ρ1 δ (x − x1 ) + ρ2 δ (x − x2 ), x1 < x2 , ρ1 > 0, ρ2 > 0. Moment equalities (12.79) take the form ρ1 ρ2 + = Ab1 − iAσ11 β2 , x − x1 − iν1 y x2 − x − iν1 y ρ2 ρ1 + = Ab1 − iAσ11 β1 κ−1 . x1 − x − iν2 y x2 − x − iν2 y

(12.87)

We put x2 − x = − (x1 − x) and separate the real and the imaginary parts in (12.87). Simple analysis shows that under the conditions ν2 > ν1 ,√ ,√ x1 = x − y 5, x2 = x + y 5, (12.88) Aσ11 y 1 + sν12 1 + sν22 > 0. ρ1 = ρ2 = − 4sν1 (ν22 − ν12 ) Note. If in the previous example σ22 = 0, then direct computations show that the control problem is solvable if and only if σ11 ≤ 0. 2. Let us consider M points zj = xj + iy, which lie on the horizontal line. (j) (j) Then z1 = xj + iν1 y, z2 = xj + iν2 y. Let σ11 = const, σ22 = 0, σ12 = 0 the desired values of stresses at all M points. From (12.75), (12.76) follows '−1 - A = 2 ν22 − ν12 . (12.89)

(j) (j) (j) We put λ := 2πh (1 − κ), bj := b1 . Then w1 = λ b1 − iAσ11 ,

(j) (j) w2 = λ b1 − iAσ11 κ−1 . (j)

a1 = Aσ11 ,

(j)

(j)

(j)

(j)

a2 = −a1 , b2 = −κb1 ,

496

12 Optimal Control

It is convenient to represent the quadratic form (12.73) as sum of four (j) (k) (j) (k) (j) expressions, which contain the diﬀerences w1 − w ¯1 , w2 − w ¯2 , w1 − (k) (j) (k) ¯1 . Then w ¯2 , w2 − w ⎧ 2M M ⎨ wα − w ¯β bj − bk − 2iAσ11 (1) ¯(1) ξ ξ =λ ⎩ zα − z¯β xj − xk + 2iν1 y j k α,β=1

j,k=1

M bj − bk − 2iAσ11 κ−1 (2) ¯(2) ξj ξk + xj − xk + 2iν2 y j,k=1 M bj − bk − iA 1 + κ−1 σ11 (1) ¯(2) + ξ ξ xj − xk + i (ν1 + ν2 ) y j k

+

(12.90)

j,k=1

⎫ M bj − bk − iA 1 + κ−1 σ11 (2) ¯(1) ⎬ . + ξ ξ xj − xk + i (ν1 + ν2 ) y j k ⎭ j,k=1

Recall that the values b1 , . . . , bM can be chosen arbitrarily. Let us require that for all 1 ≤ j, k ≤ M the equalities (bj − bk ) /Aσ11 = − (xj − xk ) /ν1 y were held. It is not diﬃcult to conﬁrm that this system of equations is consistent. With this choice b1 , . . . , bM the quadratic form coincides with the value 2 M λAσ11 (1) (2) − ξ + ξj (12.91) ν1 y j=1 j and is non-negative, when σ11 < 0. Further, let us consider brieﬂy the case of localized in [a, b] ⊂ R loads. Theorem 2. In order to exist a generalized boundary load N (x) (N (x) dx = dσ (x)), applied to the portion −∞ < a ≤ x ≤ b < +∞ and such, that a) dσ (x) ≥ 0; (α)

b) the relations wj (α) σ22 ,

forms

(α) σ12

=

b a

(α) (α = 1, 2, . . . , M ) with given σ11 , dσ (t) / t − tα j

were fulﬁlled, it is necessary and suﬃcient that the quadratic

2M (zj − a) wj − (¯ zk − a) w ¯k ¯ ξj ξk , zj − z¯k

2M (b − zj ) wj − (b − z¯k ) w ¯k ¯ ξj ξk . zj − z¯k

j,k=1

j,k=1

(12.92) (α)

were non-negative with any choice b1

from (12.76)

The designation zj , zk was introduced above.

12.7 Boundary Control of the Stress Intensity Factors

497

12.7 Boundary Control of the Stress Intensity Factors in a Halfspace with a Crack Let us consider a crack in piezoceramic halfspace (x2 ≥ 0) which is bounded by vacuum and it is free from forces everywhere, except at a part of the −iωt or electric shear force boundary x1 ∈ [a, b], where p (x1 , t) = Re P (x1 ) e −iωt that are independent of coordinate x3 . charges q (x1 , t) = Re Q (x1 ) e 0.4

λ

0.3

0.2 1

0.1

2 3

0.0 –4

x1 –2

0

2

4

Fig. 12.16. Changes of the optimal control function λ on the boundary portion of a halfspace in case of a crack positioned perpendicular to the boundary of the halfspace 1.6

μ

1.2 1 2

0.8

0.4

0.0 –4

–2

0

2

x1

4

Fig. 12.17. Changes of the optimal control function μ on the boundary portion of a halfspace in case of a crack positioned perpendicular to the boundary of the halfspace

498

12 Optimal Control 6.0

λ

4.5 1 3.0

1.5

2 3 x1

0.0 –1.0

–0.5

0.0

0.5

1.0

Fig. 12.18. Changes of the optimal control function λ in case of a crack oriented at angle π/4 to the boundary of the halfspace 10.0

μ

7.5

5.0 1

2.5 3 0.0 –1.0

x1

2 –0.5

0.0

0.5

1.0

Fig. 12.19. Changes of the optimal control function μ in case of a crack oriented at angle π/4 to the boundary of the halfspace

We want to determine the control functions P (x1 ), Q (x1 ) from conditions (12.34), (12.35). Example 1. A straightline crack of length 2 is positioned perpendicular to the boundary and symmetric with the respect of portion [a, b] (h is the distance from the centre of the crack to the boundary). Figure 12.16 shows the changes λ = |P (x1 )| /cE 44 for the values of param(1) (1) eters a/ = −4, b/ = 4, α1 = Ω0 (−1) = 0, α2 = Ω0 (1) = 0.1, h/ = 1.2

12.8 Control of Electric Charges on the Electrodes

499

(the crack is closed in the vicinity of the vertex). Curves 1–3 have been constructed for the normalized values of wave number γ ∗ = 1, 1.5 and 2. The graphic of magnitude μ = |Q (x1 )| /e15 for the same values of the parameters and γ ∗ = 1 is shown in Fig. 12.17, where curve 1 is for α1 = 0, α2 = 0.1 and curve 2 is for α1 = 0.1, α2 = 0. Example 2. A straightline crack is positioned at an angle of π/4 to the boundary. For this case Figs. 12.18 and 12.19 show the graphs of quantity λ and μ at h/ = 3, a/ = −1, b/ = 1, α1 = 0, α2 = 0.1 (the crack is closed on the nearest to the boundary tip). Curves 1–3 conform to values γ ∗ = 1, 2 and 3.

12.8 Control of Electric Charges on the Electrodes in a Layer with a Partially Electrodized Opening Consider a piezoceramic layer (0 ≤ x1 ≤ a, −∞ < x2 < ∞, −∞ < x3 < ∞), in the Cartesian system of coordinates Ox1 x2 x3 , containing a tunnel opening along the x3 -axis, the cross-section of which is bounded by a smooth contour C. The bases of the layer are free from stress and coupled with vacuum everywhere except the portions x2 ∈ [b, d] (x1 = 0, a), where shear forces p (x2 , t) = Re P (x2 ) e−iωt or electric charges q (x2 , t) = Re Q (x2 ) e−iωt harmonically changing with time and independent of the coordinate x3 act; (t is the time, ω is the circular frequency). On the free from forces surface of the opening there are two continuous in the direction of axis x3 active electrodes symmetrically positioned with the prescribed diﬀerence of electric potential 2φ∗ = Re Φ∗ e−iωt (unelectrodized portions of the opening are coupled with vacuum). It is assumed that the cross-section of the cavity has horizontal and vertical axes of symmetry and it is positioned symmetrically with respect to the bases of the layer (Fig. 12.20). X2

X1

Fig. 12.20. The scheme of a layer with partially electrodized cavity

500

12 Optimal Control

The optimization problem is formulated as follows: we seek to determine the intensity of distribution of shear forces P (x2 ) or electric charges Q (x2 ), assumed as the control function, along the portions x2 ∈ [b, d] (x1 = 0, a), in such a way, so that the total electric charges on the active electrodes reach the prescribed values. Besides, the norm of the control function in space L2[b,d] is required to be minimal. In other words, we investigate the possibility of electric current control in the outer circuit of the voltage generator with minimal electric expenses due to the boundary mechanical and electric loading. The solution of this inverse problem is carried out considering the corresponding direct boundary problem of electroelasticity. Consider a piezoceramic layer with a tunnel cavity, in which the wave electroelastic ﬁeld is excited by the diﬀerence of electric potentials 2φ∗ supplied on two continuous electrodes. The bases of the layer and the surface of the cavity are free from forces, the outer medium is vacuum. The additional factor of excitation of harmonic oscillations in the layer are the concentrated on its bases along lines x2 = η2 , −∞ < x3 < ∞, x1 = 0 and x1 = a, harmonically changing with time, not depending on coordinates x3 shear forces Pk = Re Pk∗ δ (x2 − η2 ) e−iωt or electric charges Qk = Re Q∗k δ (x2 − η2 ) e−iωt (k = 1, 2). Here index k = 1 refers to boundary x1 = 0, index k = 2 to x1 = a, δ (x) to the Dirac δ-function. Following the presentation of previous chapters we may show, that the given boundary problem may be reduced to the following system of integrodiﬀerential equations ν (ζ0 ) + ν (ζ)g1 (ζ, ζ0 ) ds + f (ζ) g2 (ζ, ζ0 ) ds = N1 (ζ0 ) , C C 1 − f (ζ0 ) + {ν (ζ) g3 (ζ, ζ0 ) + f (ζ) g4 (ζ, ζ0 )} ds = N2 (ζ0 ), 2 C f (ζ)g5 (ζ, ζ0 ) ds = N3 (ζ0 ) , ζ0 ∈ C\Cφ ,

ζ0 ∈ Cφ ,

C

# . /& π ζ0 + ζ¯ 1 π (ζ0 − ζ) iψ0 g1 (ζ, ζ0 ) = Re e + ctg + P1 eiψ0 + P2 e−iψ0 , ctg 2a 2a 2a 2e15 g (ζ, ζ0 ) , 2 ) 5 cE (1 + k15 44 # π ζ + ζ¯0 1 e15 |ξ20 − ξ2 | π (ζ − ζ0 ) + n 4 sin sin g3 (ζ, ζ0 ) = ε − + 11 2a 2π 2a 2a & ∞ 1 iγ|ξ20 −ξ2 | 1 − cm (ξ20 − ξ2 ) cos αm ξ1 cos αm ξ10 , e + 2iaγ a m=1 g2 (ζ, ζ0 ) =

#

g4 (ζ, ζ0 ) =

12.8 Control of Electric Charges on the Electrodes

1 Re eiψ 4a

.

/& π ζ + ζ¯0 π (ζ − ζ0 ) ctg + ctg 2a 2a

501

sin ψ sign (ξ20 − ξ2 ) , 2a# . /& ¯ + ζ0 π ζ ) 1 π (ζ − ζ 0 Im eiψ0 ctg + ctg , g5 (ζ, ζ0 ) = 4a 2a 2a +

1 1 (A0 − iB0 ) , P2 = −S − (A0 + iB0 ) , a a

1 iγ|ξ2 −ξ20 | , sign (ξ2 − ξ20 ) 1 − e S= 2ia ∞ A0 = β1k αk cos αk ξ1 sin αk ξ10 , P1 = S −

B0 =

k=1 ∞

β0k sign (ξ20 − ξ2 ) cos αk ξ1 cos αk ξ10 ,

k=1

1 −αk |ξ2 −ξ20 | 1 df , e − m e−λk |ξ2 −ξ20 | , f (ζ) = m αk λk ds 1 −λm |ξ20 −ξ2 | 1 −αm |ξ20 −ξ2 | cm (ξ20 − ξ2 ) = e − e , λm αm 2

Pk∗ iγ|ξ20 −η2 | N1 (ζ0 ) = e {sign (ξ − η ) sin ψ − 1 + 20 2 0 2 acE 44 (1 + k15 ) k=1

+ π 1 ( π + Re eiψ0 ctg (μk + ζ0 ) − ctg (μk − ζ0 ) 2 2a 2a −2 (Ak cos ψ0 + Bk sin ψ0 )} − 2 ( 2 k15 Q∗k iγ|ξ20 −η2 | − 2 ) sin ψ0 sign (ξ20 − η2 ) e ae15 (1 + k15 βmk =

k=1

−2 (Ak cos ψ0 + Bk sin ψ0 )]

% |ξ20 − η2 | N2 (ζ0 ) = Φ (ζ0 ) + − 2a k=1 π μk + ζ¯0 1 π (μk − ζ0 ) + n 4 sin sin + 2π 2a 2a ∗

2

2 Pk∗ k15 2 ) e15 (1 + k15

& ∞ 1 iγ|ξ20 −η2 | 1 (k) e − cm (ξ20 − η2 ) cos αm η1 cos αm ξ10 + + 2iaγ a m=1 # 2 π μk + ζ¯0 |ξ20 − η2 | 1 Q∗k π (μk − ζ0 ) − + n 4 sin sin + − 2 ) ε11 (1 + k15 2a 2π 2a 2a k=1

502

12 Optimal Control

.

2 −k15

∞ 1 iγ|ξ20 −η2 | 1 (k) − cm (ξ20 − η2 ) cos αm η1 cos αm ξ10 e 2iaγ a m=1

/&

2

Q∗k {2sign (η2 − ξ20 ) sin ψ0 4a ε11 k=1

( + π π μk + ζ0 ) − ctg (μk − ζ0 ) +Re eiψ0 ctg (¯ 2a 2a " ∞ ! αm −λm |ξ20 −η2 | (k) −αm |ξ20 −η2 | e −e Ak = − cos αm η1 sin αm ξ10 , λ m m=1 N3 (ζ0 ) =

Bk = sign (η2 − ξ20 )

∞

(k) e−λm |ξ20 −η2 | − e−αm |ξ20 −η2 | cos αm η1 cos αm ξ10 ,

m=1

ψ = ψ (ζ) ,

ψ0 = ψ (ζ0 ) ,

(1)

ζ = ξ1 + iξ2 ,

ζ0 = ξ10 + iξ20 ,

ζ, ζ0 ∈ C. (12.93)

(2)

here η1 = 0, η1 = a, μ1 = iη2 , μ2 = a + iη2 , Φ∗ (ζ0 ) is the piecewiseconstant function, determining the value of the electric potentials on the electrodes, ψ is the angle between the normal to contour C and axis x1 at point ζ ∈ C. It should be noted that the action of linear sources on the bases of the layer causes the appearance of electric charges of various signs on the active electrodes. Therefore in (12.93) we should set P1∗ = −P2∗ , Q∗1 = −Q∗2 . Violation of this requirement renders the system (12.93) unsolvable. The expression for the density amplitude of distribution of electric charges qj (β) (0 ≤ β ≤ 2π) on j-th electrode has the form qj (β0 ) =qjφ (β0 ) + qjφ

(β0 ) = −

ε11 4a

2 k=1

Q∗k Rk (η2 , ζ0 ) #

f (ζ)Im e C

ζ0 ∈ Cϕj ,

/& π ζ¯ + ζ0 π (ζ − ζ0 ) + ctg ds ctg 2a 2a

. iψ0

1 Rk (η2 , ζ0 ) = sign (η2 − ξ20 ) sin ψ0 2a

( + π 1 π μk + ζ0 ) − ctg (μk − ζ0 ) + Re eiψ0 ctg (¯ (12.94) 4a 2a 2a where Cφj is the part of contour C, where the j-th electrode is positioned. Returning to the control problem we will write it in a formalized manner. The amplitude of the total charge of j-th electrode taking into account (12.94) may be represented as (Λ)

Qj = Qφj + Qj , Qφj

β2j = β2j−1

qjφ (β0 ) s (β0 ) dβ0

(β2j−1 < β0 < β2j , j = 1, 2)

(12.95)

12.8 Control of Electric Charges on the Electrodes

503

(Λ)

Here Qj is the additional charge appearing due to the action of the layers bases shear forces p (x2 , t) or charges q (x2 , t) on the prescribed portions (Λ) x2 ∈ [b, d]. The quantity Qj may be determined by (Λ) Qj

β2j =

qj∗ (β0 ) s (β0 ) dβ0

(β2j−1 < β0 < β2j , j = 1, 2)

β2j−1

qj∗

⎧ ⎨d

(β0 ) = C

⎩

Λ (η2 ) f(Λ)

(η2 , ζ) dη2

b

⎫ ⎬ ⎭

d G (ζ, ζ0 )ds + g

Q (η2 )L (η2 , ζ0 ) dη2 , b

L (η2 , ζ0 ) = R1 (η2 , ζ0 ) − R2 (η2 , ζ0 ) , # . /& π ζ¯ + ζ0 ε11 π (ζ − ζ0 ) iψ0 Im e + ctg , G (ζ, ζ0 ) = − ctg 4a 2a 2a

(12.96)

where f(Λ) (η2 , ζ) is the “standard” solution of system (12.93) corresponding (1)

(2)

to the action at the points x2 = η2 , x1 = η1 = 0 and x1 = η1 = a of linear sources (forces and charges) of unity intensity. Λ (η2 ) denotes either the intensity of forces P (η2 ) or the intensity charges Q (η2 ) interpreted as the control function. The quantity g = 0, if Λ (η2 ) = P (η2 ) and g = 1 at Λ (η2 ) = Q (η2 ). The equality (12.96) can written in the following form (Λ) Qj

d Λ (η2 )mj (η2 ) dη2

=

(j = 1, 2)

b

β2j β2j−1 (Λ)

SJ

(Λ)

SJ

mj (η2 ) =

(η2 , ζ0 ) s (β0 ) dβ0 ,

(12.97)

% ! π (ζ − ζ0 ) f(Λ) (η2 , ζ)Im eiψ0 ctg 2a C /& π ζ¯ + ζ0 +ctg ds + +gL (η2 , ζ0 ) ζ0 ∈ Cφj 2a

(η2 , ζ0 ) = −

ε11 4a

Here the total charges on the electrode must have the prescribed values and taking into account (12.95), (12.97) we come to relations Qj =

Qφj

d Λ (η2 )mj (η2 ) dη2 = κj

+ b

where κj is the given complex number.

(j = 1, 2) ,

(12.98)

504

12 Optimal Control

Thus, the inverse problem is reduced to -problem of moments: it is necessary to determine the control function Λ (η2 ) that has to satisfy the moments of equality d Λ (η2 )mj (η2 ) dη2 = κj − Qφj (j = 1, 2) (12.99) b

and observing the conditions of the minimum of the control norm 0 1d 1 1 2 Λ (η2 )L2 = 2 |Λ (η2 )| dη2 → min [b,d]

(12.100)

b

From the results presented in Sect. 12.1 it follows that the extremal element is determined by 2 Λ (η2 ) = χj m ¯ j (η2 ) , (12.101) j=1

where the constants χj are determined from system (12.99). As an example consider a layer by piezoceramic with a circular tunnel cavity. Stress is imposed via a pair of electrodes, the amplitude potential of which diﬀers by 2Φ∗ . It is required to determine the intensity of distribution 27

λ

26

25

24

23 –0.3

η2 –0.1

0.1

0.3

Fig. 12.21. Changes of the modulus of the optimal function amplitude λ = |P(η2 )/Φ∗ | disconnecting the circuit of voltage generator at R/α = 0, 1, β/α = −0, 3, d/α = 0, 3, γα = 3

12.8 Control of Electric Charges on the Electrodes 1E-7

505

δ

8E-8

6E-8

4E-8

2E-8

0E+0 –0.3

η2 –0.2

–0.1

0.0

0 .1

0.2

0.3

Fig. 12.22. Changes of the modulus of the optimal function amplitude δ = |Q(η2 )/Φ∗ | disconnecting the circuit of voltage generator at R/α = 0, 1, β/α = −0, 3, d/α = 0, 3, γα = 3

6.3 arg(P)

4.2 arg(Q)

2.1

0.0 –0.3

η2 –0.1

0.1

0.3

Fig. 12.23. Changes of the arguments of the amplitudes of the optimal shear forces and charges on the prescribed loading positions

506

12 Optimal Control

Fig. 12.24. The contour lines of the modulus of the displacement amplitude in a piece-wise homogenous layer under the inﬂuence of optimal shear forces P (η2 )

216

λ

212

208

204

200 –0.4

η2 –0.3

–0.2

–0.1

0.0

Fig. 12.25. Changes of the modulus of optimal control function amplitude λ = |P(η2 )/Φ∗ | at R/α = 0, 1, β/α = −0, 4, d/α = 0, γα = 4, κ1 = 0 (l = 1, 2)

12.8 Control of Electric Charges on the Electrodes 6E–8

507

δ

4E–8

2E–8

0E+0 –0.4

η2 –0.3

–0.2

–0.1

0.0

Fig. 12.26. Changes of the modulus of optimal control function amplitude δ = |Q(η2 )/Φ∗ |

6.3

4.2

arg(P)

2.1

arg(Q) 0.0 –0.4

η2 –0.2

0.0

Fig. 12.27. Changes of the arguments of the amplitudes of the optimal shear forces and charges on the prescribed loading positions

508

12 Optimal Control

Fig. 12.28. The contour lines of the modulus of the displacement amplitude in a piece-wise homogeneous layer under the inﬂuence of optimal shear forces P (η2 )

of shear forces P (η2 ), either charges Q (η2 ) or conditions (12.99) at restrictions (12.100). Figure 12.21 illustrates the change of the modulus of function of optimal control λ = |P (η2 ) /Φ∗ | for the values of parameters R/a = 0.1, b/a = −0.3, d/a = 0.3, γ/a = 3, κ = 0 ( = 1, 2) (the outer circuit of the voltage generator is “disconnected”. The graph of quantity δ = |Q (η2 ) /Φ∗ | for the same values of parameters are represented in Fig. 12.22. The arguments of the functions of optimal control are shown in Fig. 12.23. The contour lines of the modulus of the displacement amplitude in a layer with an opening under the inﬂuence of optimal shear forces for this case are given in Fig. 12.24. Figures 12.25–12.28 illustrate analogous results for asymmetrically positioned portions by the application of control actions for the values of parameters R/a = 0.1, b/a = −0.4, d/a = 0, γa = 4, κ = 0 ( = 1, 2). In the calculations we set a = 1m. The numerical calculations show that the form of the control function is considerably determined by the frequency of harmonic excitation, the length and distribution of the loading portions, and also the conﬁguration of heterogeneities.

Appendix A

Table A.1. Properties of some piezoceramics [25] Quantity cE 11 cE 12 cE 13 cE 33 cE 44 sE 11 sE 12 sE 13 sE 33 sE 44 s11 s33 σ11 σ33

e31 e33 e15 d31 d33 d15

Dimensions

1010 N/m2

10−12 m2 /N / 0 / 0 / 0 / 0

0 = 8, 85 · 10−12 F/m cal/m2 10−12 cal/N

Composition P ZT − 4

P XE − 5

BaT iO3

P ZT − 5

13.9 7.78 7.43 11.5 2.56 12.3 −4.05 −5.31 15.5 39.0 730 635 1475 1300 −5.2 15.1 12.7 −123 289 496

10.3 5.80 5.90 10.2 2.5 15.4 −5.1 −6.2 17.0 40.0 1008 893 1800 1750 −7.78 15.2 12.9 −178 356 515

15.0 6.6 6.6 14.6 4.4 9.1 −2.7 −2.9 9.5 22.8 840 820 1450 1700 −4.35 17.5 11.4 −78 190 260

12.1 7.54 7.52 11.1 2.11 16.4 −5.74 −7.22 18.8 47.5 916 830 1730 1700 −5.4 15.8 12.3 −171 374 584

Table A.2. The roots µi (i = 1, 2, 3) of (3.8) for some piezoelectric media.

PZT-4 P XE − 5 BaT iO3 P ZT − 5

Plane stress state

Plane deformation

1.208661i, ±0.160878 + 1.010431i 1.018582i, ±0.276178 + 1.023294i 0.923772i, ±0.211637 + 1.000093i 1.023773i, ±0.214681 + 1.038072i

1.229866i, 1.106819i, 0.950025i, 1.102905i,

±0.248901 + 1.054629i ±0.329118 + 1.067716i ±0.234453 + 1.003569i ±0.307261 + 1.065445i

Appendix B

In order to solve the singular integral equations (SIE) we eﬃciently apply the direct method allowing to avoid the procedure of their regulation and is directly reduces them to the system of linear algebraic equations. One of the direct methods is the method of quadratures [24, 48, 70, 84, 137, 208, 210, 211, 216, 217, 218, 243, 244, 245, 246, 247, 248, 249].

B.1 The Approximate Solution of Singular Integrodiﬀerential Equations Prescribed on Smooth Disconnected Contours The procedure of the method of quadratures consider on the example of solution of singular integrodiﬀerential equation similar to the equation considered in Par. 4.1. 1 −1

p (δ) dδ + δ − δ0

1 p (δ)G (δ, δ0 ) dδ = N (δ0 ) , δ0 ∈ [−1, 1] .

(B.1)

−1

Appearing here function G (δ, δ0 ) may have a slight singularity. Equation (B.1) is considered together with additional condition 1

p (δ)dδ = 0.

(B.2)

−1

Seeking for the solution of SIE in the class of functions with derivatives not restricted at the ends of portion [−1, 1] we assume Ω0 (δ) , p (δ) = √ 1 − δ2

Ω0 (δ) ∈ H [−1, 1] .

(B.3)

512

Appendix B

Construct the Lagrange interpolating polynomial for sought-for function Ω0 (δ) in the form [126] n n n−1 2 0 1 0 L [Ω0 , δ] = Ω cos mΘν cos mΘ − Ω , n ν=1 ν m=0 n ν=1 ν

2ν − 1 π, Ω0ν = Ω0 (δν ) , 2n δν = cos Θν (ν = 1, 2, . . . , n) , Θν =

(B.4)

where Θν are the zeros of Chebyshev polynomial of the ﬁrst kind. Applying Gauss formula [126] to the additional condition (B.2) 1 −1

n ω (δ) dδ π √ = ω (δν ), n ν=1 1 − δ2

we obtain

n

Ω0ν = 0.

(B.5)

(B.6)

ν=1

Therefore in (B.4) the last sum may be omitted. For the singular integral we have [208] 1 −1

n Un−1 (η) ω (δ) dδ π ω (δν ) √ + πω (η) , = 2 n δ − η Tn (η) 1 − δ (δ − η) ν=1 ν

(B.7)

√ where Tn (η) = cos (n arccos η) , Un−1 (η) = sin (n arccos η) / 1 − δ 2 are the Chebyshev polynomial of the ﬁrst and second kind, respectively. At points ηm = cos (πm/n) (m = 1, 2, . . . , n − 1) which are zeros of the Chebyshev polynomial of the second kind, formula (B.7) coincides with the ordinary formula of quadrature of Gauss type (B.5) 1

n

√ −1

ω (δ) dδ π ω (δν ) (m = 1, 2, . . . , n − 1) . = 2 n ν=1 δν − ηm 1 − δ (δ − ηm )

(B.8)

Formulas (B.5) and (B.5) are coexact, if ω (δ) is the power polynomial not exceeding 2n − 1 and 2n [126, 208], respectively. Integrating expression (B.4) and taking into account (B.6) we ﬁnd δν p (δν ) =

dp (δ) = − −1

Smν =

n−1 =1

n 2 Smν Ω0m , n m=1

cos Θm sin Θν .

(B.9)

B.1 The Approximate Solution of Singular Integrodiﬀerential Equations

513

With the help of (B.5) and (B.9) we obtain the formula of quadrature 1 p (δ)G (δ, ηm ) dδ = −

n n 2π Skν Ω0k G (δν , ηm ) sin Θν . n2 ν=1

(B.10)

k=1

−1

Thus, using the quadrature formulas (B.5), (B.8) and (B.10) to the integrals in (B.1), (B.2) and taking into account (B.6) we come to the system of n linear algebraic equations with respect to the values of function Ω0 (δ) in the nodes of interpolation δν (ν = 1, 2, . . . , n) ⎧ n ⎪ ⎪ cmν Ω0ν = Nm (m = 1, 2, . . . , n − 1) , ⎨ ν=1

n ⎪ ⎪ Ω0ν = 0, ⎩ ν=1

cmν

n π 2π = g (δν , ηm ) − 2 Skν sin Θk G (δk , ηm ), n n

(B.11)

k=1

Nm = N (ηm ) , Ω0ν = Ω0 (δν ). At points δ = ±1 interpolation polynomial (B.4) has the form n

L [Ω0 , −1] =

1 2ν − 1 ν+n 0 π, (−1) Ων tg n ν=1 4n

(B.12)

n

L [Ω0 , 1] = −

1 2ν − 1 π. (−1)ν Ω0ν ctg n ν=1 4n

Increasing n the sequence of the constructed according to the solution of system (B.11) of interpolating trigonometric polynomials is evenly converges Table B.1. n

2 3 4 5 6 7 8 9 10 11 12

c44 = c55 = 1 c45 = 0

− KIII

c44 = 1, c55 = 3 c45 = 0

− KIII

c44 = 1, c55 = 6 c45 = 0.5

− KIII

0.8830 0.9673 1.0396 1.0365 1.0334 1.0337 1.0340 1.0339

1.0792 1.0905 1.1250 1.1248 1.1242 1.1246 1.1250 1.1249 1.1248 1.1248 1.1249

1.3663 1.1717 1.1455 1.1548 1.1595 1.1624 1.1630 1.1625 1.1623

+ KIII

1.3663 1.2779 1.2597 1.2595 1.2597 1.2587 1.2601 1.2603 1.2601

514

Appendix B

to the solution of (B.1), (B.2) [210]. the uniform tendency of the approximate solution of the (B.1), (B.2) to accurate. In order to illustrate the convergency of the given scheme in Table B.1 there are represented the value of relative stress intensity

factors Km on the tips of parabolic crack ξ1 = δ, ξ2 = δ 2 /2, δ ∈ [−1, 1] in the anisotropic space under the inﬂuence on its edges of statistic shear forces (x3 = const) (see: Par. 5.1).

B.2 Solution of the Singular Integral Equations Given on Smooth Connected Contours Consider the singular integral equation of the second kind which is similar to SIF obtained in Par. 5.1 2π f (ϕ0 ) + 0

f (ϕ) dϕ + ϕ − ϕ0

2π f (ϕ) F (ϕ, ϕ0 ) dϕ = M (ϕ0 ),

(B.13)

0

ϕ0 ∈ [0, 2π] . Here, kernel F (ϕ, ϕ0 ) may have not more than a slight singularity, M (ϕ0 ) − 2π is the periodical of the H¨ older function. Calculating the singular and regular integrals in (B.13) we use quadrature formula [137] 2π y (ϕ)g (ϕ, ϕ0 ) dϕ = 0

n 2π y (ϕj )g (ϕj , ϕ∗m ) , n j=1

(B.14)

where ϕj = 2π (j − 1) /n and ϕ∗j = ϕj + π/n (j = 1, 2, . . . , n) are the nodes of interpolation and collocation, respectively. The interpolation formula for function f (ϕ) at odd n has the form [70] n

Lm [f ; φ] =

ϕj − ϕ 1 n (ϕj − ϕ) cos ec . f (ϕj ) sin n j=1 2 2

(B.15)

In the nodes of collocation ϕ∗m m = 1, n L[f ; φ∗m ] =

n

1 ϕ∗ − ϕj . (−1)m+j f (ϕj ) cos ec m n j=1 2

(B.16)

B.3. Numerical Solution of the Singular Integrodiﬀerential Equations

515

Taking into account the formulas (B.14), (B.16) integrals (B.13) are brought to the system of n algebraic equations with respect to the values of function f (ϕ) in the nodes of interpolation ϕj (j = 1, 2, . . . , n) n 1 0 ϕ∗ − ϕj m+j fj (−1) cos ec m (B.17) + 2πF ∗ (ϕj , ϕ∗m ) = Mm , n j=1 2 F ∗ (ϕj , ϕ∗m ) = F (ϕj , ϕ∗m ) +

1 , ϕj − ϕ∗m

fj0 = f (ϕj ) , Mm = M (ϕ∗m ) (m = 1, 2, . . . , n) . At n → ∞ the sequence of the approximate solution evenly converges to the coexact solution of SIF (B.13).

B.3 Numerical Solution of the Singular Integrodiﬀerential Equations Given on Connected Contours Consider one of the methods of numerical solution of the system of the integrodiﬀerential equations of type (5.18) and (6.42) based on the method of quadratures. Let us write down the Lagrange interpolation polynomial for sought-for functions p (ζ) and f (ζ) in nodes βj = 2π (j − 1) N j = 1, N in the form LN [{p∗ (β) , fx }; β] =

N βj − β 1 0 0 N (βj − β) cos ec , {p , f } sin N j=1 j j 2 2

(B.18)

p (ζ) = p∗ (β) , p0j = p∗ (βj ) , f (ζ) = f∗ (β) , fj0 = f∗ (βj ) Expressions (B.18) are valid for the odd number of the nodes of subdivision of contour C. Integration of polynomial (B.18) for f∗ (β) with the help of equality [57] m sin (2m + 1) x sin 2kx dx = 2 + x, sin x 2k k=1

brings to the following expression for function f∗ (β) MN [f∗ (β) ; β] = N −1 2

Ωj (β) = −2

N 1 0 f Ωj (β) + A, N j=1 j

sin k (βj − β) − sin kβj + β. k k=1

(B.19)

516

Appendix B

Appearing here constant A should be determined from the condition of periodicity of function f∗ (β), which due to (B.19) have the form N

fj0 = 0.

(B.20)

j=1

Using (B.19) we also ﬁnd the quadrature formula 2π

f∗ (β) G (β, β ∗ ) dβ =

0

+A

N N 2π 0 f Ωjm G (βm , β ∗ )+ N 2 j=1 j m=1

(B.21)

N 2π G (βm , β ∗ ), N m=1

where Ωjm = Ωj (βm ). In the nodes of collocation β∗ = π (2 − 1) N

= 1, N at odd value N polynomial (B.18) takes value LN [p∗ (β) ; β∗ ] =

N

1 0 β ∗ − βj = 1, N . pj (−1)+j cos ec N j=1 2

(B.22)

For the singular integral in (6.42) there is a formula similar to the calculation formula of regular integral 2π 0

=

f∗ (β) Im

eiψ0 s (β) dβ = ζ (β) − ζ0 (β∗ )

(B.23)

∗ N 2π 0 eiψ0 (β ) s (βj ) . fj Im N j=1 ζ (βj ) − ζ0 (β∗ )

Substituting the integrals in (6.42) by the ﬁnal seems over formulas (B.21), (B.23) and using equalities (B.19), (B.20) and (B.22) we will come to the system of 2N + 1 algebraic equations with respect to the values of functions p (ζ) and f (ζ) in the nodes of interpolation βj j = 1, N and constant A. Note. The approximation of type (B.18) of function f (ζ) are not quite correct, because, as it follows from system (6.42), this function has root singularities on the edges of electrodes. However, at some distance from the edges, as the numerical investigation shows, we obtain the results appear to be satisfactory. Solving the system of SIF (5.18) over the described scheme, due to the continuity of its solution, the indicated incorrectness does not take place. In conclusion we should note that the indicated here procedure were probed in the process of the numerical realization of the boundary problems of electroelasticity for bodies with defects and appeared to be rather eﬃcient.

References

1. Avetisyan A.S. About the distribution of shear waves in a piezoelectric medium. Izv. Acad. Sci. ArmSSR. “Mekhanika”. Issue 38, No. 1, pp. 12–19, 1987. 2. Agranovich V.M., Derevianko N.I.. An electroelastic ﬁeld of direct piezoeﬀect at deformation of piezoceramic bodies. Applied Mekh. 1974. T 10. No. 9. pp 3–8 3. Alexandrov V.M., Mkhitaryan S.M.. Contact problems of bodies with thin coatings and interlayers. M Nauka, 1983, 487p. 4. Ambrartsumyan S.A., Bagdasaryan G.E.. Electroconductive plates and shells in a magnetic ﬁeld. M Phys. Math. Lit. 1996, 286p. 5. Ambrartsumyan S.A., Bagdasaryan G.E., Belubekyan M.V.. Magnetoelasticity of thin shells and plates. M.: Nauka, 1977, 272p. 6. Ambrartsumian S.A., Belubekian M.B.. Some problems of electromagnetic elastic plates. Yerevan State Univ. Pub. 1991, 143p. 7. Akhiezer N.I.. A classical problem of moments and some questions of analysis connected with it. M.: Fizmatgiz, 1961, 310p. 8. Babeshko V.A., Glushkov E.I., Zinehenko Z.F.. The dynamics of heterogenic linear elastic media. M.: Nauka, 1989, 344p. 9. Babich V.M., Buldirev V.S.. The asymptotic methods in the problems of diﬀraction of short waves. M.: Nauka, 1972, 456p. 10. Babich V.M., Molotkov I.A.. The mathematical methods in the theory of elastic waves. Summaries of science and technology. Ser. “Mechanics of deformed bodies”, 1977, T 10, pp 5–62. 11. Bazenov V.M., Kutsenko G.V., Vlitko A.F., Distribution of plane electroelastic waves in a piezoceramic medium. Proc. Acad. Sci. USSR. Ser. A, 1977, No 2, pp 124–128. 12. Balakirev M.K., Gilinsky I.A.. Waves in piezocrystals. Novosibirsk: Nauka, 1982, 239p. 13. Bardzokas D.I., Kudryavtsev B.A., Senik N.A.. Rayleigh’s waves in a half space with the ﬁnite system of surface electrodes. Izv. Russian Acad. Sci. Mechanics of solid bodies, 1996, No 1, pp 45–51. 14. Bardzokas D.I., Kudryavtsev B.A., Senik N.A.. About criteria of electromechanic fracture of piezoelectrics initiated by the edges of electrodes. Probl. Prochnosti, 1994, No. 7, pp 42–46. 15. Bardzokas D.I., Parton V.Z., Theocaris P.S.. Integral equations of the theory of elasticity for a multiconnected area with inclusions. Prikl. Math. and Mekh, 1989, V. 53, No 3, pp 485–495.

518

References

16. Bardzokas D.I., Rodriges P., Filstinsky M.L.. Tesion of piezoceramic bimorph with a crack crossing the interphase. Mekh. Komposit Materialov, 1997, V. 33, No 4, pp 482–488. 17. Bardzokas D.I., Senik N.A.. Excitation of symmetric and asymmetric Lamb waves in a piezostrip by surface electrodes. Pukl. Math. Mekh. 1993, V. 57, No 6, pp 91–99. 18. Bardzokas D.I., Filstinsky M.L., Concentration of electroelastic ﬁelds in a composite piezoceramic plate crossing the interphase materials. Mekh. Komposit. Materialov 1999, V. 35, No 3, pp 359–366. 19. Bardzokas D.I., Filstinsky M.L.. Impulse excitation of a piezoceramic halfspace with tunnel cavities. Izv. Rus. Acad. Sci. Mechanics of solid bodies 1996, No 3, pp 21–26. 20. Bardzokas D.I., Filstinsky M.L., Diﬀraction of a shear wave on cylindrical inclusions in a piezoelectric halfspace. Izv. Rus. Acad. Sci. Mechanics of solid bodies 1997, No 3, pp 77–84. 21. Barroute J. Introduction into the physics of ferroelectric phenomena. M.: Mir 1970, 343p. 22. Beitman Q., Erdein A., Heigher transcendental functions. M.: Nauka 1967, 300p. 23. Belokon A.V. Vorovich I.I., Some mathematical questions of the theory of electroelastic bodies. Aktualnie Probl. Mekhaniki Deformiruemikh Sred. 1979, pp 53–67. 24. Belotserkovsky S.M., Lifanov I.K.. The numerical methods in singular integral equations. M.: Nauka 1985, 254p. 25. Berlineourt D., Kerran D., Jaﬀe H.. Piezoelectric and piezomagnetic materials and their applications in converters. Fizicheskaia Akustika, V. 1, Methods and instruments of ultrasound researches. Part A., M.: Mir 1966, pp 204–326. 26. Birukov S.B.. Calculation of electrode transforms of surface waves in piezoelectrics. Z. Teckhn. Fisiks 1980, V. 50, No 8, pp 1655–1662. 27. Birukov S.B. Gorishnik L.L.. The theory interaction of surface waves in piezoelectrics with electrode structures. Z. Techn. Fisiki 1980, V. 50, No 8, pp 1647–1654. 28. Bitsadze A.B.. Boundary problems for elliptic equations of the second order. M.: Nauka 1966, 203p. 29. Bitsadze H.P.. Fundamental boundary conditions of the problem of electroelasticity for transversal-isotropic halfspace. Trans. Inst. Prikl. Matematiki, Tbilisi State Uni. 1985, No 16, pp 34–55. 30. Boriskovsky V.G., Parton V.Z.. The dynamic fracture mechanics. Itogi Nauki I Tekhn. VINITI. Ser. “Mechanics of deformable solid bodies” 1983, Vol. 16, 84 p. 31. Born M., Wolf E.. Principles of optics. M.:Nauka 1973, 720 p. 32. Borodachev N.M., Dynamic problem of a crack in case of a longitudinal shear deformation. Probl. Proehnosti. 1973, No 4, pp 23–25. 33. Brebbia C.A., Telles J.C., Wrobel L.C.. Boundary element techniques. M.: Mir 1987, 524 p. 34. Brekhovskich L.M.. Waves in laminated media. M.: Nauka 1973, 342 p. 35. Brichkov I.A., Prudnikov A.P.. Integral transformations of generalized functions. M.: Nauka 1977, 287 p. 36. Butkovsky A.Q.. The methods of control of the systems with disturbed parameters. M.: Nauka, 1975, 287 p.

References

519

37. Waganov R.B., Katsenelenbaum B.Z.. Bases of the theory of diﬀraction. M.: Nauka, 1975, 568 p. 38. Weinshtein L.A.. The theory of diﬀraction and the method of factorization. M. Sou Radio. 1966, 430 p. 39. Vatulian A.O., Kubikov V.L.. About boundary integral equations in electroelasticity. Prikl. Math. and Mech. 1989, V. 53, Issue 6. 40. Vekovischeva I.A.. A plane problem of the theory of electroelasticity for a piezoelectric plate. Prikl. Mekh. 1975, V. II, No 2, pp 85–89. 41. Vekua A.P.. The systems of singular integral equations and some boundary problems. M.: Nauka 1970, 380 p. 42. Verlan A.F., Sizikov V.S.. Integral equations; methods algorithms, programs. Directory. K. Nauka dumka 1986, 544 p. 43. Vladimirov V.S. Equations of the mathematical physics. M.: Nauka 1981, 512 p. 44. Voitovich N.V., Katsenelenbaum B.Z., Sivov A.N.. A generalized method of natural oscillations in the theory of diﬀraction. M.: Nauka 1974, 416 p. 45. Vorovich I.I., Alexandrov V.M., Babeshko V.A.. Non-classic mixed problems of the theory of elasticity. M.: Nauka 1974, 455 p. 46. Vorovich I.I., Babeshko V.A.. Dynamic mixed problems of the theory of elasticity for non-classic areas. M.: Nauka 1979, 319 p. 47. Methods of calculations in electrodynamics (Editor: R. Mittra). M.: Mir 1977, 485 p. 48. Gabdulhaev B.G.. Finite dimensional approximation of singular integrals and discrete methods of singular integral and integrodiﬀerrential equations. In the book: Mathematical Analysis, Moscow 1980, pp 251–307 (Itogi Nauki I Tekhniki VINIITI, Issue 18) 49. Galishnikova T.N., Ilinsky A.S., Numerical methods in the problems of diﬀraction. M.: Pub. House of Moscow Uni., 1987, 208 p. 50. Gahov F.D.. Boundary Problems. M.: Nauka, 1977, 640 p. 51. Gahov F.D., Chersky U.I.. Equation of a convolution type. M.: Nauka, 1978, 295 p. 52. Gilinsky I.A., Popov V.V.. Excitation of electroacoustic waves in piezoelectrics by outer sources. Z. Tekhn. Fizizki, 1976. 53. Golovchan V.T.. Diﬀraction of an elastic transverse on cylinders in a halfspace. Proc. Acad. Sci. USSR, Ser. A, 1971, No 3, pp 246–249. 54. Gorishnik L.L., Kondratiev S.N.. Excitation of surface electroacoustic waves by electrode transforms. Radiotekhnika I Elektronika, 1974, V. 19, No 8, pp 1719–1728. 55. Gorishnik L.L., Kondratiev S.N.. The theory of electrode transforms of elastic surface waves in piezoelectrics. Radiotekhnika I Elektronika, 1978, V. 23, No 1, pp 151–159. 56. Gorishnik L.L., Kondratiev S.N.. Calculation of electrode transforms of surface waves. Radiotekhnika I Elektronika, 1978, V. 23, No 1, pp 160–166. 57. Gradshtein I.S., Rizik I.M.. Tables of integral sums, series and products. M.: Fizmatgiz, 1962, 1100p. 58. Grigoliuk E.I., Filshtinsky L.A.. Periodical piece-wise homogenous elastic structures. M.: Nauka, 1994, 336 p. 59. Grigoliuk E.I., Filshtinsky L.A.. Regular piece-wise homogenous structures with defects. M.: Nauka, 1994, 336p.

520

References

60. Grigoliuk E.I., Filshtinsky V.A., Filshtinsky L.A.. About application of the general problem of moments to some optimization problems of the theory of elasticity. Izv. Rus. Acad. Sci. Mechanics of solid bodies, 1992, No 2, p. 31–37. 61. Grilitsky D.V., Opanasovich V.K.. Distribution of stresses in a piece-wise homogenous plane with a slit under pressure. Izv. Acad. Sci. Armenian SSR. Ser. “Mechanics”, 1974, V. 27, No 2, pp 24–39. 62. Grinchenko V.T.. Balance and steady-state oscillations of elastic bodies of ﬁnite dimensions. K.: Nauka Dumka, 1978, 264 p. 63. Grinchenko V.T., Meleshko V.V.. Harmonic oscillations and waves in elastic bodies. K.: Naukova Dumka, 1981, 253 p. 64. Guz A.N., Golovchan V.T.. Diﬀraction of elastic waves in multiply connected bodies. K.: Naukova Dumka, 1972, 253 p. 65. Guz A.N., Kubenko V.D., Cherevko M.A.. Diﬀraction of elastic waves. K. Naukova Dumka, 1978, 308 p. 66. Duduchava R.V.. Integral equations of convolution with discontinuous presymbols, singular integral equations with immobile singularities and their applications to the problems of mechanics. Tbilisi: Metsniereba, 1979, 135 p. 67. Dundurs I., Komninou M.. Revision and prospects of investigation of an anterphase crack. Fracture of composite materials. Proc. 1st Soviet-American Sym., Riga, 1979, pp 78–87. 68. Dieulesaintn E., Roger D.. Elastic waves in solid bodies. Application for processing of signals. M.: Nauka, 1982, 424 p. 69. Sommerfeld A.. Optics. Translation from German, edited by M.E. Elishevicha. M.: Inostr. Liter., 1953. 70. Ivanov V.V. The theory of approximate methods and its applications to the numerical solution of singular integral equations. K.: Nauka Dumka, 1968, 288 p. 71. Ivanov V.V. The methods of calculations on computers. Directory. K.: Naukova Dumka, 1986, 584 p. 72. Ivanov E.A. Diﬀraction of electromagnetic waves for two bodies. Minsk: Nauka I Tekhnika, 1968, 582 p. 73. Ilien V.P. The numerical methods of solutions of the problems of electrophysics. M.: Nauka, 1985, 336 p. 74. Iliensky A.S., Shestopalov U.V. Application of the spectral methods in the problems of distribution of waves. Moscow State Uni. Pub. 75. Iliushin A.A. Mechanics of a solid medium. 3rd Edition. Moscow State Uni. Pub., 1978, 288 p. 76. Inglind. A crack between two various media. Trans ASME J. Appl. Mech., 1965, Vol. 32, No 2, pp 165–168. 77. Zabreiko P.P., Koshelev A.I., Krasnoselky M.A. et al. Integral Equations. M.: Nauka, 1973, 496 p. 78. Isakovich M.A. General acoustics. M.: Nauka, 1973, 496 p. 79. Israilov M.S. The dynamic theory of elasticity and a wave diﬀraction. Moscow State Uni. Pub., 1992, 205 p. 80. Kino G.S.. Acoustic waves. M.: Nauka, 1990, 656 p. 81. Kalandia A.I. The mathematical methods of two dimensional elasticity. M.: Nauka, 1973, 306 p. 82. Kit G.S., Krivtsun M.G. Plane problems of thermoelasticity for bodies with cracks. K.: Naukova Dumka, 1983, 277 p.

References

521

83. Kokunov V.A., Kudryavtsev B.A., Senik N.A. A plane problem of electroelasticity for a piezoelectric layer with periodical system of electrodes on surfaces. Pukl. Math. I Mekh, 1985, T. 49, No 3, pp 489–491. 84. Korneichuk A.A. Quadrature formulas for singular integral. The numerical methods of solution of diﬀerential and integral equations and quadrature formulas. M.: Nauka, 1964, pp 64–74. 85. Kosmodamiansky A.S., Kravchenko A.P., Lozkin V.N. Inﬂuence of point electric charge on the boundary of an piezoelectric halfplane weakened by an elliptic opening. News of Acad. Sci. of Armenian SSR. Ser. “Mekhanica”, 1977, V. 30, No 1, pp 13–20. 86. Kosmodamiansky A.S., Lozkin V.N. Generalized plane stress state of thin piezoelectric plates. Prikl. Mekh., 1975, Vol. 11, No 5, pp 45–53. 87. Kosmodamiansky A.S., Storozev V.I. Dynamic problems of the theory of elasticity for anisotropic media. K.: Naukova Dumka, 1985, 175 p. 88. Crouch S.L., Starﬁld A.M.. Boundary element methods in solid mechanics. London, 1983, 330p. 89. Krein M.G., Nudelman A.A. Problems of Markov moments and extremal problems. M.: Nauka, 1973, 551 p. 90. Krivoy A.F., Radiollo N.V. Singularities of a stress ﬁeld in the vicinity of inclusions in a composite anisotropic plane. Izv. Acad. Sci. USSR. Meckanise of solid bodies, 1984, No 3, pp 84–92. 91. Kudryavtsev B.A. Mechanics of piezoelectric materials. Itogi nauki i techniki VINIITI. Ser. “Meckanics of solid bodies”, 1978, V. 11, pp 5–66. 92. Kudryavtsev B.A. Electroelastic state of a halfspace from piezoceramics with two boundary electrodes. Probl. Prochnostic, 1982, No 7, pp 56–59. 93. Kudryavtsev B.A., Parton V.Z., Rakitin V.I. Mechanics of fracture of piezoelectric materials. A rectangular tunnel crack on a boundary with a conductor. Prikl. Mat. and Mech., 1975, V. 39, No 1, pp 149–159. 94. Kudryavtsev B.A., Raitin V.I. A Griﬃths crack in a piezoelectric medium. Izv. Acad. Sci. USSR, Mech. of Solid bodies, 1979, N 1, pp 125–132. 95. Kudryavtsev B.A., Parton V.Z. About steady-state oscillations in electroelasticity. Sov. Rem Probl. Mekhaniki i Aviatsii. M.: 1982, pp 159–172. 96. Kudryavtsev B.A., Parton V.Z., Senik N.A. Mechanical models of piezoelectrics for electronic engineering. Itogi nauki i tekhniki. VINIIII. Ser. “Mechanics of solid bodies”, 1984, V. 17, pp 3–62. 97. Kupradze V.D.. Boundary problems of the theory of oscillations and integral equations. M., L.:Gostekhizdat, 1950, 280 p. 98. Kupradze V.D.. The methods of potentials in the theory of elasticity. M.: Fizmatgiz, 1963, 472 p. 99. Kupradze V.D.. Fundamental problems of the mathematical theory of diﬀraction: Steady-state process. L;M.:ONII, 1935, 112 p. 100. Kupradze V.D., Burchuladze T.V.. Dynamic problems of the theory of elasticity. Itogi Nauki i tekhniki. Ser.: Modern problems of mathematics”, VINIITI. M., 1975, V. 7, pp 105–187. 101. Kucherov I.I., Fedorchenko A.M.. Inﬂuence of a piezoeﬀect on elastic waves in bounded crystals. Ukr. Fiz. Z., 1971, V. 16, No 9, pp 1567–1569. 102. Cadu W.. Piezoelectricity and its practice application. M.: Izd. Inostr. Liter., 1949, 718 p. 103. Lavrentiev V.A., Shabat B.V.. The methods of the theory of functions of a complex variable. M.: Nauka, 1973, 736 p.

522

References

104. Landau L.D., Lifshitz E.M.. Electrodynamics of continuous media. M.: Fizmatgiz, 1959. 105. Levin L.. The theory of waveguides. M.: Radio and communication, 1981, 311 p. 106. Litvinchuk G.S.. Boundary problems and singular integral equations with a shear. M.: Nauka, 1977, 488 p. 107. Lions J.L.. Optimal control of the systems described by diﬀerential equations in partial products. M.: Mir, 1972, 414 p. 108. Loeber J.F., Si G.C.. Green’s function for cracks in heterogeneous materials. Pukl. Mekh. Applied Mechanics, 1967, V. 34, No 1, pp 131–133. 109. Luke Y.L. Mathematical functions and their approximations. M.: Mir, 1980, 608 p. 110. Liamshev L.M., Sheviakhov N.S.. Diﬀusion of a plane axially shear wave by circular piezohalfconductor cylinder. Acoust. Zurhal, 1977, V. 23, No 1, pp 95–105. 111. Macklintoc F.A., Argon A.S.. Mechanical behaviour of materials. 1966, 443 p. 112. Malmeister A.K., Tamuzs V.P., Teters G.A.. Resistance of polymere and composite materials. Riga: Zinatne, 1980, 572 p. 113. Mandelshtam L.I.. Lectures on the theory of oscillations. M.: Nauka, 1972, 470 p. 114. Mechanics of fracture and strength of materials. Directory: 4 Volumes, edited by Panasiuk V.V., K.: Naukova Dumka, 1988–1989. 115. Mechanics of coupled ﬁelds in the elements of constructions. 5 volumes. Electroelasticity, Grinchenko V.T., Ulitko A.F., Shulga N.A., edited by Guz A.N., K.: Naukova Dumka, 1989, V. 5, 280 p. 116. Mittra R., Lee S.. Analytical techniques in the theory of guided waves. M.: Mir, 1974, 323 p. 117. Mikhlin S.G., Morozov N.F., Paukshto M.V.. Integral equations in the theory of elasticity. SP.: Pub. House of Saint-Petersburg, 1994, 271 p. 118. Morachkovsky O.K., Filshtinsky M.L.. Interaction of stress waves with cracks in an anisotropic medium under the conditions of antiplane deformation. Proc. Acad. Sci. Ukrainian SSR, Ser. A, 1985, No 6, pp 42–45. 119. Morozov N.F.. Mathematical questions of the theory of cracks. M.: Nauka, 1984, 256 p. 120. Morse P.M., Feshbach H.. Methods of the theoretical physics: 2 Vols., M.: Foreign literature, 1958, Vol.1. 930 p. 121. Muskhelishvili N.I.. Singular integral equations. M.: Nauka, 1968, 512 p. 122. Mason W.. Piezoelectric crystals and their application in ultrasounds. M.: Foreign literature, Pub. 1952, 447 p. 123. Nazarchuk Z.T.. Numerical investigation of diﬀraction of waves on cylindrical structures. K.: Naukova Dumka, 1988, 254 p. 124. Nye J.F.. Physical properties of crystals and their description with the help of tensors and matrixes. M.: Foreign literature press, 1960, 388 p. 125. Nayfeh A.H.. Perturbation methods. M.: Mir, 1976, 455 p. 126. Natanson I.P.. The constructive theory of functions. M.;L.: Gostekhizdat, 1949, 688 p. 127. Nefedov E.I., Diﬀraction of electromagnetic waves on dielectric structures. M.: Nauka, 1979, 722 p. 128. Nefedov E.I., Sivov A.N.. Electrodynamics of periodical structures. M.: Nauka, 1977, 208 p.

References

523

129. Nikolsky V.V.. The theory of an electromagnetic ﬁeld. M.: Vishaia Shkola, 1961, 370 p. 130. Nikolsky V.V.. Variational methods for inner problems of electrodynamics. M.: Nauka, 1967, 460 p. 131. Nikolsky V.V., Nikolskaia T.I.. Decomposed approach to the problems of electrodynamics. M.: Nauka, 1967, 304 p. 132. Nikolsky S.M.. Quadrature formulas. M.: Nauka, 1974, 233 p. 133. Noble B.. Methods based on the Viener-Hopf technique. M.: Foreign literature Pub. 1962, 278 p. 134. Novatsky V.. The theory of elasticity. M.: Mir, 1975, 872 p. 135. Novatsky V.. Electromagnetic eﬀects in solid bodies. M.: Mir, 1986, 160 p. 136. Panasiuk V.V., Savruk M.P., Datsishin A.P.. Distribution of stresses in the vincinity of cracks in plates and shells. K.: Naukova Dumka, 1976, 442 p. 137. Panasiuk V.V., Savruk M.P., Nazarchuk Z.T.. Method of singular integral equations in two dimensional problems of diﬀraction. K.: Naukova Dumka, 1984, 344 p. 138. Parton V.Z., Boriskovsky V.G.. Dynamics of brittle fracture. M.: Machinostroenie, 1988, 239 p. 139. Parton V.Z., Kudryavtsev B.A.. Dynamic antiplane problem of piezoelectric medium. Proc. Moscow Inst. Of Chem. Eng., 1974, No 56, pp 3–13. 140. Parton V.Z., Kudryavtsev B.A.. Electroelasticity of piezoelectric and electroconductive bodies. M.: Nauka, 1988, 472 p. 141. Parton V.Z., Kudryavtsev B.A., Senik N.A.. About one criterium of electric fracture of dielectrics in strongly heterogeneous ﬁelds. Proc. Acad. Sci. USSR, 1988, V. 298, No 3, pp 611–615. 142. Parton V.Z., Mustafaev J.M., Senik N.A.. Methods of the mechanics of fracture and the breakdown of dielectrics. Baku.: Inst. Of Phys. Of Acad. Sci. of Azerbaidgan SSR, preprint, 1991, No 7, 24 p. 143. Parton V.Z., Perlin P.I.. Integral equations of the theory of elasticity. M.: Nauka, 1977, 12 p. 144. Parton V.Z., Perlin P.I.. Methods of the mathematical theory of elasticity. M.: Nauka, 1981, 688 p. 145. Parton V.Z., Filstinsky M.L.. Dynamic problems of the theory of elasticity for a piezoelectric medium with tunnel cuts. News of Acad. Sci. Armenian SSR. Ser. “Mekhanika”, 1989, V. 42, No 5, pp 17–24. 146. Parton V.Z., Filstinsky M.L.. General representations of coupled electromagnetic and mechanical ﬁelds in a piezoelectric medium. Proc. Acad. Sci. USSR, 1989, V. 308, No 1, pp 53–55. 147. Parton V.Z., Filstinsky M.L.. Stationary wave process in a piezoelectric layer and halfplanes weakened by tunnel cuts (antiplane deformation). Prikl. Math. i Mech., 1992, V. 56, No 3, pp 510–518. 148. Parton V.Z., Filstinsky M.L.. Dynamic problem of electroelasticity for a layer and halfplanes with tunnel cavities. Izv. Russian Acad. Sci. Mech. Of solid bodies, 1993, No 5, pp 82–88. 149. Pisarenko G.G.. Strength of piezoceramics. K.: Naukova Dumka, 1987, 231 p. 150. Podstrigach J.S., Bourak J.I., Gachkevich A.P., Cherniavskaia L.V.. thermoelasticity of electroconductive bodies. K.: Naukova Dumka, 1977, 247 p. 151. Podstrigach J.S., Bourak J.I., Kondrat V.F.. Magnetothermoelasticity of electroconductive bodies. K.: Naukova Dumka, 1982, 196 p.

524

References

152. Polovinkina I.B., Ulitko A.F.. On the theory of eqyilibrium of piezoceramic bodies with cracks. Teplovie Napriazenia v elementah kohstruktsi, 1978, Issue 18, pp 10–17. 153. Popov G.J.. concentration of elastic stresses in the vicinity of dies, cuts, thin inclusions and strengthens. M.: Nauka, 1982, 344 p. 154. Poruchikov V.B.. Methods of the dynamic theory of elasticity. M.: Nauka, 1986, 328 p. 155. Prossdorf S.. Some classes of singular equations. M.: Mir, 1979, 494 p. 156. Prusov I.A., Lunskia L.I.. Elastic state of a piece-wise homogenous orthotropic plane with cuts. Prikl. Mech., 1969, V. 32, No 8, pp 77–83. 157. Rise J.R., Sih G.C. Plane problems of cracks positioned on the interphase of two various media. Trans. ASME J. Appl. Mech. 158. Romalis N.B., Tamuzs V.P.. Fracture of structurally heterogenic bodies. Riga: Zinatie, 1989, 224 p. 159. Fracture. Translation from English. Edited by H. Liebowitz. M.: Mir, 1973–1976, V. 1–7. 160. Savruk M.P.. Two dimensional problems of elasticity for bodies with cracks. K.: Naukova Dumka, 1981, 324 p. 161. Sedov L.I.. Mechanics of a continuous media. M.: Nauka, 1983, V. 1, 2, 536 p, 584 p. 162. Seleznev I.T.. Simulation of wave and diﬀractional processes in continuous media. K.: Naukova Dumka, 1989, 204 p. 163. Senik N.A.. Rayleigh waves in a piezoelectric halfspace with a pair of surface electrodes. Izv. Russian Acad. Sci. Mech. of solid bodies, 1992, No 4, pp 106– 115. 164. Slepiyan L.I.. Mechanics of cracks. L.: Shipbuilding, 1990, 296 p. 165. Sneddon I.. Fourier transform. M.: Foreign literature Pub. House, 1954, 296 p. 166. Directory of special functions with formulas and mathematical tables. Edited by M. Abramovitz, I Stigun. M.: Nauka, 1979, 830 p. 167. Tamm I.E.. The fundamental theory of electricity. M.: Nauka, 1976, 616 p. 168. Tikhonov A.N., Samarsky A.A.. Equations of the mathematical physics. M.: Nauka, 1977, 736 p. 169. Ulitko A.F.. On the theory of oscillations of piezoceramic bodies. Thermal stresses in the elements of constructions, Isssue 25, 1975, pp 90–99. 170. Ulitko A.F.. Method of natural vector functions in space problems of the theory of elasticity. K.: Naukova Dumka, 1979, 261 p. 171. Ulitko A.F.. About some singularities of the statement of boundary problems of the electroelasticity. Sovrem. Probl. Mekhaniki i aviatsii, 1982, pp 290–300. 172. Fedoruk M.V.. Asymptotics Integrals and Series. M.: Nauka, 1987, 544 p. 173. Felsen L., Markuvits N.. Radiation and diﬀusion of waves: 2 Vols., M.: Mir, 1978, 547 p, 555 p. 174. Filshtinsky V.A., Filshtinsky M.L.. About the choise of minimizing functional at optimal conversion of an elastic plate from initial state into prescribed ﬁnal. Prikl. Mekhs, 1986, Vol. 22, No 2, pp 90–94. 175. Filshtinsky L.A.. Interaction of stress waves with curvilinear tunnel cracks of longitudinal shear in a halfspace. Math and mekh, 1982, V. 46, No 3, pp 482–487. 176. Filshtinsky L.A., Volkova L.V.. Dynamic problem of the theory of elasticity for an area with curvilinear cuts (plane deformation). Proc. Acad. Sci. USSR, 1983, Vol. 271, No 4, pp 831–834.

References

525

177. Filshtinsky L.A., Filshtinsky M.L.. Tension of a composite pieazoceramic plate weakened by crack cuts. Prikl. Mekh, 1993, V. 29, No 12, pp 66–71. 178. Filshtinsky L.A., Filshtinsky M.L.. Green’s function for a composite piezoceramic plane with an interphase crack. Prikl. Math. and Mekh., 1994, Vol 58, Issue 2, pp 159–166. 179. Filshtinsky M.L.. Fracture control of a piezoceramic body with a crack. Dynamics and strength of machines: collection of articles. Kharkov, 1987, Issue 15, pp 93–96. 180. Filshtinsky M.L.. Dynamic reaction of piezoceramic halfspace with a crack of longitudinal shear on the action of concentrated forces. Teoret. i Prikl. Mekh., K.: Donetsk: Higher School, 1989, Issue 20, pp 50–55. 181. Filshtinsky M.L.. Interaction of waves of mechanical displacements with tunnel cracks of longitudinal shear in a piezoceramic halfspace. Izv. Acad. Sci. Armenian SSR, 1988, No 5, pp 50–55. 182. Filshtinsky M.L.. Harmonic oscillation of a piezoelectric halfspace with tunnel cavities (deformation of longitudinal shear). Acoust J., 1991, Vol 37, Issue 4, pp 777–781. 183. Filshtinsky M.L.. Dynamic loading of a piezoceramic halfspace with a crack. Acoust. J., 1993, V. 39, Issue 5, pp 921–928. 184. Filshtinsky M.L.. Unstationary dynamic problem of electroelasticity for an unbounded medium with curvilinear tunnel cracks. Prikl. Math. and Mekh., 1994, V. 58, No 4, pp 159–166. 185. Filshtinsky M.L.. About one approach to the investigation of electroelastic ﬁelds in cylinder excited by a system of surface electrodes. Vestnik Sumi Uni., Sumi 1998, No 1(9), pp 3–10. 186. Filshtinsky M.L.. Invastigation of oscillations of a piezoceramic cylinder with tunnel rigid inclusions. Vestnik Sumi State Uni., Sumi 1999, No 1(12), pp 12–20. 187. Filshtinsky M.L.. Solution of static and dynamic problems of electroelasticity for piecewise homogeneous bodies. Dr. Eng, Thesis, Donetsk, 1996, 284 p. 188. Filshtinsky M.L., Bardzokas D.I.. Concentration of stresses in a composite plane with openings. Prikl. Mekh., 1998, V. 34, No 1, pp 98–102. 189. Filshtinsky M.L., Bardzokas D.I.. Oscillations of a piezoceramic cylinder under the inﬂuence of pulsing pressure parallel to the symmetry of the material. Vestnik Sumi Uni., Sumi 1999, No 1(12), pp 20–28. 190. Filshtinsky M.L., Bardzokas D.I.. Method of boundary of integral equations in the problems of diﬀraction of electroelastic waves. Sumi Uni., 1999, 194 p. 191. Filshtinsky M.L., Mordik I.N.. Inﬂuence of heterogeneities of crack types on the amplitude frequency characteristics of piezoceramic cylinder. Vestnik Sumi Uni., Sumi 1997, No 1(7), pp 158–170. 192. Finkelshtein A.B. Waves in an electroelastic halfbounded medium with periodical system of electrodes. Izv. Math. Caucasic Sci. Center of Higher School of Natural Sciences, 1986, No 1, pp 59–62. 193. Fok V.A. Problems of diﬀraction and propagation of electromagnetic waves. M.: Sov. Radio, 1970, 518 p. 194. Henl X., Maue A., Vestpfal K.. The theory of diﬀraction. M.: Mir, 1964, 428 p. 195. Cherepanov G.P.. Diﬀraction of elastic waves on a cut. Mechanics of continuous media and relative problems of an analysis. M.: Nauka, 1972, pp 615–622. 196. Cherepanov G.P.. Mechanics of brittle fracture. M.: Nauka, 1974, 640 p.

526

References

197. Shestopalov V.P.. method of Riemann-Hilbert problems in the theory of diﬀraction and propagation of electromagnetic waves. Charkov: Pub. House of Kharkov Uni., 1971, 400 p. 198. Shestopalov V.P.. Adder equations in the modern theory of diﬀraction. K.: Naukova Dumka, 1983, 252 p. 199. Shulga N.A., Bolkisev A.M.. Oscillation of piezoceramic bodies. K.: Naukova Dumka, 1990, 228 p. 200. Erdogan F.E.. Propagation of stresses in connected various materials with cracks. Trans. ASME, J. Appl. Mech., 1965, Vol. 32, No 2, pp 169–177. 201. Achenbach J.D.. Wave propagation in elastic solids. Amsterdam, North Holland Publ. Co., 1973, 427p. 202. Achenbach J.D.. Elastic wave propagation problems in non destructive evaluations. Trends, Delft, 1989, pp 19–38. 203. Achenbach J.D., Keer L.M., Mendelson D.A.. Elastodynamic analysis of an edge crack. Trans. ASME J. Appl. Mech., 1980, Vol. 47, pp 551–556. 204. Adelman N.T., Stavski Y., Flexural-extensional behaviour of composite piezoelectric circular plates. J. Acoust. Soc. Amer., 1980, Vol. 67, No 3, pp 819–822. 205. Atkinson C.. On some integral equations arising in elastic biomaterial problems. Int. J. Eng. Sci., 1979, Vol. 17, No 5, pp 587–597. 206. Bardzokas D.I., Filshtinsky M.L., Rodriguez R.. Concentration of electroelastic ﬁelds in a composite piezoceramic plate with defects crossing the interphase. Mechanics of composite materials, 1998, Vol. 34, No 6, pp 549–556. 207. Bugdayci N., Body D.B.. A two dimensional theory for piezoelectric layers used in electromechanical transducers. Part 1. Derivation Int. J. Solids and Struct., 1981, Vol. 17, No 12, pp 1159–1178. 208. Chawla M.M., Ramakrishnan T.R.. Modiﬁed Gauss-Jacobi quadrature formulas for the numerical evaluation of Cauchy type singular integrals. BIT (Sver.), 1974, Vol. 14, No 1, pp 14–21. 209. Dunkin J.W., Eringen A.C.. On the propagation of waves in an electromagnetic elastic solid. J. Engn. Sci., 1963, Vol. 1, pp 461–495. 210. Erdogan F.E., Gupta G.D.. On the numerical solutions of singular integral equations. Quart. Appl. Math, 1972, Vol. 29, No 4, pp 525–534. 211. Erdogan F.E., Gupta G.D., Cook T.S.. The numerical solution of singular integral equations. Mechanics of Fract. Leyden: Noordhoﬀ Int. Publ., 1973, Vol. 1, pp 368–425. 212. Filshtinsky M.L.. Diﬀraction of acoustoelectric waves by tunnel cavities in an unbounded piezoceramic medium. J. Appl. Mechs., 1998, Vol. 62, No 4, pp 649–655. 213. Filshtinsky M.L., Rodriguez-Ramos R.. Squeezing of composite piezoceramic plate under loading of regular normal pressure. Proc. 6th Annual International Conference on Composite Engineering (ICCE/6), Orlando (USA), 1999, p. 207. 214. Filshtinsky M.L., Rodriguez-Ramos R., Sanchez-Casals O. Fracture mechanics in piezoceramic composite plate. Technical Report of Concordia University, Montreal, 2000, No 4. 21p. 215. Filshtinsky M.L., Shaban K.. The steady-state wave process in a piezoceramic medium with cavities (plane deformation). Proc. 20th International Conference “The boundary element method” (BEM 20), Orlando (USA), 1998, Vol. 4, pp 167–176.

References

527

216. Gerasoulis A., Strivastav R.P.. A method for the numerical solution of singular integral equation with a principal value integral. Int. J. Eng. Science, 1981, Vol. 19, No 9, pp 1293–1298. 217. Ioakimidis N.I.. Genaral methods of solving crack problems in the theory of plane elasticity. (Dr. Eng. Thesis), Athens, 1976, 406 p. (in Greek). 218. Ioakimides N.I.. Application of the Gauss and Radou-Laguerre quadrature rules to the numerical solution of the Cauchy type singular equations. Comp. & Struct., 1981, Vol. 14, No 1–2, pp. 63–70. 219. Joshiu S.G., White R.M.. Excitation and detection of surface elastic waves in piezoelectric crystals. J. Acoust. Soc. Amer., 1969, Vol. 46, No 1, Pt. 1, pp 17–27. 220. Kudryavtsev B.A., Parton V.Z., Senik N.A.. Mechanics of piezoelectric materials. Applied Mechanics: Soviet Review. Electromagnetoelasticity. Vol. 2, Hemisphere Publ. Corp., 1990, pp 1–58. 221. Kurlandska Z.T.. A crack problem in elastic dielectric. I. The statement of the problem and diﬀraction of electro-magnetic wave. Bul. Acad. Polon., Ser. Sci. Techniqyes, 1977, Vol. 25, No 4, pp 109 [225]–117[263]. 222. Kurlandska Z.T. Inﬂuence of electromagnetic ﬁeld on crack propagation in elastic dielectric. Bul. Acad. Polon., Ser. Sci. Techniqyes, 1978, Vol. 28, pp 497 [971]. 223. Lee E.B., Markus L.. Foundations of optimal control theory. John Wiley and Sons, Inc., New York, London, Sydney, 1967. 224. Loeber J.F., Sih G.C. . Diﬀraction of anti-plane shear waves by a ﬁnite crack. J. Acoust. Soc. Am., 1968, Vol. 40, pp 90–98. 225. Luong W.C., Keer L.M., Achenbach J.D.. Elastodynamic stress intensity factors of a crack near an interphase. Int. J. of Sol. And Struct., 1975, Vol. 11, pp 919–925. 226. Maue A.W. Die Beugung elasticher wellen an der halbebene. ZAMM, 1953, Bd. 33, No 1–2, pp 1–10. 227. Maue A.W. Die Entspannugswelle bei plotzlichem Einschitteines gespannten elastischen Korpers. ZAMM, 1954, Bd. 34., No 1–2, pp 1–12. 228. Maugin G.A.. Continuum mechanics of electromagnetic solids. AmsterdamNew York: North-Holland, 1988, 488p. 229. Maugin G.A., Epstein M., Trimarco C.. Theory of elastic inhomogeneities in electromagnetic materials. Int. J. Eng. Science, 1992, Vol. 30, pp 1441–1449. 230. Moon F.G.. Scattering of wave by a cylindrical piezoelectric inclusion. J. Acoust. Soc. Amer., 1970, Vol. 48, Part 2, pp 253–262. 231. Mindlin R.D.. High frequency vibration of piezoelectric crystal plates. Int. J. of Sol. And Struct., 1972, Vol. 8, No 7, pp 895–906. 232. Mindlin R.D.. Equations of high frequency vibration of thermopiezoelectric crystal plates. Int. J. of Sol. and Struct., Vol. 10, No 6, pp 625–637. 233. Pao Y.H., Mow C.C.. Diﬀraction of elastic waves and dynamic stress concentrations. 1973, 685 p. 234. Pak Y.E.. Crack extension force in a piezoelectric material. Trans. ASME J. Appl. Mech., 1990, Vol. 57, No 3, pp 647–653. 235. Parton V.Z.. Fracture mechanics for piezoelectric materials.Acta Astronautica, 1976, Vol. 3, No 9–10, pp 671–683. 236. Parton V.Z. Kudryavtsev B.A.. Electromagnetoelasticity. New York: Gordon & Breach, 1998.

528

References

237. Sih G.C. (ed.). Elastodynamic crack problems. Leyden: Noordhoﬀ, 1977. 238. Sih G.C., Loeber J.F.. Wave propagation in an elastic solid with a line of discontinuity or ﬁnite crack. Quart. Appl. Math, 1969, Vol. 27, No 2, pp 193–213. 239. Shohat J., Tamarkin J.. The Problem of Moments. New York, 1943, 140 p. 240. Sommerfeld A. Elecrodynamics. New York: Academic Press, 1952. 241. Stone S.F., Ghosh M.L., Mal A.K.. Diﬀraction of anti-plane shear waves by an edge crack. Trans. ASME J. Appl. Mech., 1980, No 2, pp 359–362. 242. Suo Z., Kuo C.M., Barnett D.M., Willis J.R.. Fracture mechanics for piezoelectric ceramics. J. Mech. Phys. Solids, 1992, Vol. 40, No 4, pp 739–765. 243. Theocaris P.S.. Numerical solution of singular integral equations: Methods. J. Eng. Mech. Div. Pros. ASCE, 1981, Vol. 107, No 5, pp 733–752. 244. Theocaris P.S.. Numerical solution of singular integral equations: Applications. J. Eng. Mech. Div. Pros. ASCE, 1981, Vol. 107, No 5, pp 753–770. 245. Theocaris P.S., Ioakimidis N.I. Numerical solution of Cauchy type singular integral equation. Athens: Academy of Athens Publ., 1977, 65 p. 246. Theocaris P.S., Ioakimidis N.I. On the Gauss-Jacobi numerical integration method applied to the solution of singular integral equations. Bull. Calcutta Math. Soc., 1978, Vol. 71, pp 29–43. 247. Theocaris P.S., Ioakimidis N.I. The inclusion problem in plane elasticity. Quart. J. Mech. Appl. Math., 1977, Vol. 30, No 4, pp 437–448. 248. Theocaris P.S., Tsamashyros G.j. Numerical solution of systems of singular integral equations with variable coeﬃcients. 249. Tsamashyros G.J., Theocaris P.S.. Equivalence and convergence of direct and indirect methods for the numerical solution of singular integral equations. Computing, 1981, Vol. 27, No 1, pp 71–80. 250. Voigt W. Lehrbuch der Kristall-Physik. Leipzig: Teubner, 1910. 251. Wolf P. Low frequency diﬀraction by a hard strip. SIAM J. Appl. Math., 1975, Vol. 29, No 2, pp 273–287. 252. Yeh C. The diﬀraction of waves by a penetrable ribbon. J. Math. Phys., 1963, Vol. 4, No 1, pp 65–71. 253. Curie J., Curie P. Constactions et dilatations produities par des tensions electriques dans les cristaux hemeedres a faces inclinnees. Comp. rend, 1881, Vol. 93, p. 1137–1142. 254. Bardzokas D.I., Filshtinsky M.L.. Electroelasticity of piecewise-uniform bodies. Sumy, University Book Publ., 2000, 308 p. 255. Bardzokas D.I., Zobnin A.I., Senik N.A., Filshtinsky M.L. Mathematical modeling in the problems of the mechanics of coupled ﬁelds. Moscow, Edition URSS, 2005, Vol. 1, 311 p.,Vol 2, 374 p. 256. Bardzokas D.I., Zobnin A.I., Senik N.A., Filshtinsky M.L.. Problems in thermopiezoelectricity with analytical solutions. Moscow, Editor URSS, 2005, 173 p. 257. Bardzokas D.I., Zobnin A.I.. Mathematical modeling of Physical processes in Composite Materials of periodical Structure. Moscow, Editor URSS, 2003, 334 p. 258. Bardzokas D.I., Kudryavtsev B.A., Senik N.A. Wave propagation in electromagnetoelastic media. Moscow, Editor URSS, 2003, 301 p. 259. Bardzokas D.I., Sfyris G.I.. Excitation of shear waves in a piezoceramic medium with partially electrodized tunnel openings strengthened by a rigid stringer. MPE 2005, Vol. 2. pp 231–244.

References

529

260. Bardzokas D.I., Sfyris G.I., Sfyris D.I.. Antiplane Mixed Boundary Value Problem of Electroelastric Media, for a Piezoelectric Medium with Defects in th Form of Holes. The 5th National NDT Conference of the Hellenic Society of Non Destructive Testing. Athens, 2005, 33 p. 261. Akhiezer N.I. “Lectures on the approximation theory” Moscow, Nauka, 1965, 407p. 262. Grigoryan E.H. Vibration of the magneto-elastic medium that is excited by a concentrated harmonic force. Izv. Armenian Academy of Sciences Mechanica 1978, Vol. 38, N 5, pp 48–62. 263. Guz A.N., Golouchan V.T. Diﬀraction of the elastic waves in multiply connected bodies. Kiev, Nauk. Dumka, 1972, 253 p. 264. Kantorovich L.V., Akilov G.P Functional Analysis in normed spaces. Moscow, Figmatgiz, 1959, 684 p. 265. Kats N.S., Krein M.G., R-functions, analytical functions mapped in the upper half-plane on themselves. From the book Atkinson F. “Discrete and continuous boundary value problems”, Moscow, Mir, 1968, pp 629–648. 266. Lechnitskii S.G. Anisotropic plates, Moscow, Gostechizdat, 1967, 356 p. 267. Sedov L.I. Plane problems of hydrodynamics and aerodynamics. Moscow, Gostechizdat, 1950, 444p. 268. Filshtinsky V.A. Exponential problem of moments on the axis for a given ﬁnite number of intervals in the spectrum. Notes of the mechanical-mathematical School of the Charkov University and of the Mathematical Society of Charkov, 1964, Vol. 30, N 4, pp 186–200. 269. Filshtinsky V.A., Filshtinsky L.A. The control of fracture of cracked bodies. Izv. Acad. Sci. USSR Mechanics of solid bodies, 1988, N 1, pp 158–163. 270. Filshtinsky L.A. Two dimensional static and dynamic problems of elasticity for cracked bodies. Theroy and calculation of the elements of thin-shelled constructions. Izd. Moscow State Uni. 1986 pp 107–117. 271. Filshtinsky L.A. Difraction of elastic waves on cracks, openings and inclusions within an isotropic medium. Izv. Acad. of Sci USSR, Mech. of solid bodies, 1991, N 4, pp 119–127. 272. Filshtinsky L.A. Plane problem of magneto-elasticity for a ferromagnetic medium weakened by cracks. Prikl. Math. and Mech., 1993, Vol. 57, N 5, pp 143–152. 273. Filshtinsky L.A., Kravets E.M. Plane problem of magneto-elasticity for a ferromagnetic medium with holes. Fizika Chim. Mech. Mater., 1995, N 6, pp 38–46. 274. Fishtinsky L.A., Kravets E.M., Hvorost V.A. Stress state of ferromagnetic plates with cracks under the inﬂuence of strong magnetic ﬁeld. Prikl. Mech. and Tech. Fizika, 1993, N 6, pp 147–151. 275. Filshtinsky L.A., Fomenko L.I. Dynamic intensity of a conductive space with cracks under the inﬂuence of a strong magnetic ﬁeld. Prikl. Math. and Mech., 1992, Vol. 56, N 1, pp 143–149. 276. Filshtinsky L.A., Fomenko L.I., Dynamic intensity of a conductive half-space with cracks under the inﬂuence of a strong magnetic ﬁeld. Prikl. Math. and Tech. Fizika, 1991, N 6, pp 16–20. 277. Filshtinsky L.A., Fomenko L.I., Hvorost V.A. Diﬀraction of a shear wave on inclusions in diamagnetic and paramagnetic media, under the inﬂuence of strong magnetic ﬁelds. Fiz. Chim. Mech. Mater., 1993, Vol. 29, N 6, pp 82–86.

530

References

278. Filshtinsky L.A., Chestalova V.V. Diﬀraction of a magnetoelastic wave on a hole and a crack (antiplane problem). Fiz. Chim. Mech. Mater., 1992, Vol. 29, N 3, pp 14–18. 279. Filshtinsky L.A., Kravets E.M., Hvorost V.A. Application of the singular integral equations technique in the study of the stationary stress of a ferromagnetic medium with cracks. Proc. of the VII Inter. Congress “Methods of discrete singularities in Mathematical Physics., Charkov, 1997, pp 42–45. 280. Filshtinsky L.A., Kravets E.M., Hvorost V.A. Stationary dynamic problem of magnetoelasticity for the partially-homogenous inﬁnite and electrical conducting medium. Proc. of the VII Inter. Congress “Methods of discrete singularities in Mathematical Physics., Charkov, 1997, pp 191–194. 281. Filshtinsky L.A., Kravets E.M., Hvorost V.A. Stress state of the ferromagnetic plate with cracks under the inﬂuence of a strong magnetic ﬁeld. Prikl. Math. and Tech. Fizika, 1993, N 6, pp 147–151. 282. Filshtinsky M.L., Oleinik V.M., Filshtinsky L.A. Optimal control of the static and dynamic S.I.F for a piezoelectric halfspace. VI Conf. USSR on control of mechanical systems. Lvov, 1988, p.156. 283. Brown W.F. Electric and magnetic forces. Am. J. of Phys., 1951, Vol. 19, pp 290–304, pp 333–350. 284. Erdogan F.E. Approximate solutions of systems of singular integral equations. SIAM J. Appl. Math., 1969, Vol. 17, N 6, pp 1041–1059. 285. Pao Y.H., Yeh C.S. A linear theory for soft feroomagnetic elastic solids. Int. J. Eng. Sci., 1973, N 11, pp 415–436. 286. Shindo Y. Mechanics of electroelastic solid bodies under the inﬂuence of a magntic ﬁeld, 1983, Vol. A49, N 448, pp 1467–1474. 287. Sindo Y. diﬀraction of antiplane shear waves bya ﬁnite crack in the presence of a magnetic ﬁeld. Z. angew Matg. und Mech., 1976, Vol. 56, N 1, pp 33–41. 288. Kudryavtsev B.A., Parton V.Z. Magnetoelasticity. Itogi Nauki I techniki VINITI, 1981, Vol. 14, 39p. 289. Sea G. Optimization, Theory and Algorithms, Moscow, Mir, 1973, 244p.

Wave Propagation in Infinite Domains: With Applications to Structure Interaction (Lecture Notes in Applied and Computational Mechanics)

Wave propagation in infinite domains: with applications to structure interaction

Wave Propagation in Infinite Domains: With Applications to Structure Interaction

Fracture Mechanics (Lecture Notes in Applied and Computational Mechanics)

Trends in Computational Contact Mechanics (Lecture Notes in Applied and Computational Mechanics)

Singularities in Linear Wave Propagation (Lecture Notes in Mathematics)

Large-Scale PDE-Constrained Optimization in Applications (Lecture Notes in Applied and Computational Mechanics)

Large-Scale PDE-Constrained Optimization in Applications (Lecture Notes in Applied and Computational Mechanics)

Multifield Problems in Solid and Fluid Mechanics (Lecture Notes in Applied and Computational Mechanics)

Wave propagation in layered anisotropic media: with applications to composites

Wave Propagation in Fluids

Wave Propagation in Layered Anisotropic Media with Applications to Composites (North-Holland Series in Applied Mathematics and Mechanics, Volume 39)

Wave Propagation in Layered Anisotropic Media with Applications to Composites (North-Holland Series in Applied Mathematics and Mechanics, Volume 39)

Numerical Methods for Nonsmooth Dynamical Systems: Applications in Mechanics and Electronics (Lecture Notes in Applied and Computational Mechanics)

Lecture Notes in Fracture Mechanics

Wave Propagation in Materials for Modern Applications

Convective Heat and Mass Transfer in Rotating Disk Systems (Lecture Notes in Applied and Computational Mechanics)

Lecture Notes in Fracture Mechanics

Lecture notes in Fracture Mechanics

Singular Problems in Shell Theory: Computing and Asymptotics (Lecture Notes in Applied and Computational Mechanics, 54)

Spectral Method in Multiaxial Random Fatigue (Lecture Notes in Applied and Computational Mechanics)

Fluid Structure Interaction II: Modelling, Simulation, Optimization (Lecture Notes in Computational Science and Engineering, 73)

Fluid-Structure Interaction: Modelling, Simulation, Optimisation (Lecture Notes in Computational Science and Engineering)

Fluid-Structure Interaction: Modelling, Simulation, Optimisation (Lecture Notes in Computational Science and Engineering)

Singularities in Linear Wave Propagation

Topics in Computational Wave Propagation: Direct and Inverse Problems

Methods in electromagnetic wave propagation

Functional Differential Equations with Infinite Delay (Lecture Notes in Mathematics)

Elastomere Friction: Theory, Experiment and Simulation (Lecture Notes in Applied and Computational Mechanics, Volume 51)

Dynamics and Balancing of Multibody Systems (Lecture Notes in Applied and Computational Mechanics 37)

Elastomere Friction: Theory, Experiment and Simulation (Lecture Notes in Applied and Computational Mechanics)

Wave Propagation in Infinite Domains: With Applications to Structure Interaction (Lecture Notes in Applied and Computational Mechanics)

Wave propagation in infinite domains: with applications to structure interaction

Wave Propagation in Infinite Domains: With Applications to Structure Interaction

Fracture Mechanics (Lecture Notes in Applied and Computational Mechanics)

Trends in Computational Contact Mechanics (Lecture Notes in Applied and Computational Mechanics)

Singularities in Linear Wave Propagation (Lecture Notes in Mathematics)

Large-Scale PDE-Constrained Optimization in Applications (Lecture Notes in Applied and Computational Mechanics)

Large-Scale PDE-Constrained Optimization in Applications (Lecture Notes in Applied and Computational Mechanics)

Multifield Problems in Solid and Fluid Mechanics (Lecture Notes in Applied and Computational Mechanics)

Wave propagation in layered anisotropic media: with applications to composites

Wave Propagation in Fluids

Wave Propagation in Layered Anisotropic Media with Applications to Composites (North-Holland Series in Applied Mathematics and Mechanics, Volume 39)

Wave Propagation in Layered Anisotropic Media with Applications to Composites (North-Holland Series in Applied Mathematics and Mechanics, Volume 39)

Numerical Methods for Nonsmooth Dynamical Systems: Applications in Mechanics and Electronics (Lecture Notes in Applied and Computational Mechanics)

Lecture Notes in Fracture Mechanics

Wave Propagation in Materials for Modern Applications

Convective Heat and Mass Transfer in Rotating Disk Systems (Lecture Notes in Applied and Computational Mechanics)

Lecture Notes in Fracture Mechanics

Lecture notes in Fracture Mechanics

Singular Problems in Shell Theory: Computing and Asymptotics (Lecture Notes in Applied and Computational Mechanics, 54)

Spectral Method in Multiaxial Random Fatigue (Lecture Notes in Applied and Computational Mechanics)

Fluid Structure Interaction II: Modelling, Simulation, Optimization (Lecture Notes in Computational Science and Engineering, 73)

Fluid-Structure Interaction: Modelling, Simulation, Optimisation (Lecture Notes in Computational Science and Engineering)

Fluid-Structure Interaction: Modelling, Simulation, Optimisation (Lecture Notes in Computational Science and Engineering)

Singularities in Linear Wave Propagation

Topics in Computational Wave Propagation: Direct and Inverse Problems

Methods in electromagnetic wave propagation

Functional Differential Equations with Infinite Delay (Lecture Notes in Mathematics)

Elastomere Friction: Theory, Experiment and Simulation (Lecture Notes in Applied and Computational Mechanics, Volume 51)

Dynamics and Balancing of Multibody Systems (Lecture Notes in Applied and Computational Mechanics 37)

Elastomere Friction: Theory, Experiment and Simulation (Lecture Notes in Applied and Computational Mechanics)

Recommend Documents