Statistical analysis of extreme values: with applications to insurance, finance, hydrology and other fields

R.-D. Reiss M. Thomas Statistical Analysis of Extreme Values with Applications to Insurance, Finance, Hydrology and Ot...

Author: Rolf-Dieter Reiß | Michael Thomas

168 downloads 1030 Views 8MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!

Report copyright / DMCA form

DOWNLOAD PDF

R.-D. Reiss M. Thomas

Statistical Analysis of Extreme Values with Applications to Insurance, Finance, Hydrology and Other Fields Third Edition

Birkhäuser Basel · Boston · Berlin

Rolf-Dieter Reiss Michael Thomas FB Mathematik Universität Siegen Walter-Flex-Str. 3 57068 Siegen Germany e-mail: [email protected] [email protected]

2000 Mathematics Subject Classiﬁcation 60G70, 62P05, 62P99, 90A09, 62N05, 68N15, 62-07, 62-09, 62F10, 62G07, 62G09, 62E25, 62G30, 62M10

Library of Congress Control Number: 2007924804 Bibliographic information published by Die Deutsche Bibliothek Die Deutsche Bibliothek lists this publication in the Deutsche Nationalbibliograﬁe; detailed bibliographic data is available in the Internet at http://dnb.ddb.de

ISBN 978-3-7643-7230-9 Birkhäuser Verlag, Basel - Boston - Berlin This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, speciﬁcally the rights of translation, reprinting, re-use of illustrations, recitation, broadcasting, reproduction on microﬁlms or in other ways, and storage in data banks. For any kind of use permission of the copyright owner must be obtained. First edition 1997 Second edition 2001 © 2007 Birkhäuser Verlag AG, P.O. Box 133, CH-4010 Basel, Switzerland Part of Springer Science+Business Media Printed on acid-free paper produced from chlorine-free pulp. TCF f Cover design: Alexander Faust, Basel, Switzerland Printed in Germany ISBN 978-3-7643-7230-9

e-ISBN 978-3-7643-7399-3

987654321

www.birkhauser.ch

Preface to the Third Edition First of all we would like to thank all those who showed a steady, extraordinary interest in this book about extreme value analysis. This gave the motivation, courage and opportunity to provide an update of the book and to work out new topics, which primarily focus on dependencies, conditional analysis based on serial and covariate information, predictions, and the multivariate modeling of extremes. As mentioned by Chris Heyde1 while reviewing the second edition: “There is a considerable statistical content in the book, quite apart from its focus on extremes. ... The authors are seeking, quite properly, to embed the analysis of extreme values into the mainstream of applied statistical investigations.” This strategy has been continued and strengthened in the new edition. With each new edition there are complex questions as well as complex solutions. In that context, the cooperation with distinguished experts becomes more and more important. Parts I–III about the basic extreme value methodology remained unchanged to some larger extent, yet notable are new or extended sections about • Testing Extreme Value Conditions with Applications related to goodness–of– ﬁt tests, co–authored by J. H¨ usler and D. Li; • The Log–Pareto Model and other Pareto–Extensions with a view towards super–heavy tailed distributions; • An Overview of Reduced–Bias Estimation, an approach related to the jackknife method, co–authored by M.I. Gomes; • The Spectral Decomposition Methodology which reduces multivariate questions to univariate ones to some extent, • About Tail Independence with testing tail dependence against certain degrees of tail independence, co–authored by M. Frick. 1 Heyde,

C. (2002). Book Review: Statistical Analysis ... Australian & New Zealand J. Statist. 44, 247–248.

vi

Preface to the Third Edition

Of central importance are the new chapters entitled • Extreme Value Statistics of Dependent Random Variables co–authored by H. Drees; • Conditional Extremal Analysis which provides the necessary technical support for certain applications; • Elliptical and Related Distributions with special emphasis on multivariate Student and sum–stable distributions. Other new topics are collected within Part IV:

Topics in Hydrology and Environmental Sciences;

Part V:

Topics in Finance and Insurance,

Part VI:

Topics in Material and Life Sciences.

Within these parts one may ﬁnd • a new chapter about Environmental Sciences, co–authored by R.W. Katz, with a detailed description of the concepts of cycles, trends and covariates; • a new section about Predicting the Serial Conditional VaR, co–authored by A. Kozek and C.S. Wehn, including remarks about the model validation; • a new section about Stereology of Extremes, co–authored by E. Kaufmann, with remarks about modeling and estimation. The entire text has been thoroughly updated and rearranged to meet the requirements. The new results and topics are elaborated on about 120 pages. The book includes the statistical MS Windows application Academic Xtremes 4.1 and StatPascal on CD. The STABLE package for sum–stable distributions is no longer included. The major diﬀerence of the academic version compared to the professional one is a restriction of the executable sample sizes. Consequently, not all of the numerical examples in the book can be executed with the academic version. To keep the book at a reasonable size, the former sections Implementation in Xtremes and the separate Case Studies in Extreme Value Analysis were omitted. The Appendix about Xtremes and StatPascal of the second edition is considerably shortened. The full description of Xtremes and StatPascal—also including the former sections Implementation in Xtremes—may be found in the Xtremes User Manual which is enclosed as a pdf–ﬁle on the CD. It is a pleasure to thank Th. Hempﬂing who showed great eﬃciency in editing this book. Siegen, Germany

Rolf–Dieter Reiss Michael Thomas

Preface to the Second Edition With the second edition we continue a project concerning extreme value analysis in combination with the interactive statistical software Xtremes which started in the late 1980’s. An early publication was Chapter 6 together with the User’s Guide to Xtremes in [16], besides tutorials for the statistical software Xtremes in 1993 and 1995 which had a wider circulation within the extreme value community. These eﬀorts culminated in the ﬁrst edition of the present book which has found a favorable reception from the side of practitioners and in academic circles. The new highlights of this extended edition, elaborated on about 160 pages, include • the statistical modeling of tails in conjunction with the global modeling of distributions with special emphasis laid on heavy–tailed distributions such as sum–stable and Student distributions; • the Bayesian methodology with applications to regional ﬂood frequency analysis and credibility estimation in reinsurance business; • von Mises type upper bounds on remainder terms in the exceedance process approximation and a thorough theoretical and practical treatment of the phenomenon of penultimate distributions; • a section about conditional extremes; • an extension of the chapter about multivariate extreme value models, especially for the Gumbel–McFadden model with an application to the theory of economic choice behavior; • a chapter about the bivariate peaks–over–threshold method; • risk assessment of ﬁnancial assets and portfolios in the presence of fat and heavy–tailed distributions by means of the Value–at–Risk (VaR); • VaR under the Black–Scholes pricing and for general derivative contracts; • sections about corrosion analysis and oldest–old questions.

viii

Preface to the Second Edition

The “analysis of extreme values must be embedded in various other approaches of main stream statistics” as mentioned in the ﬁrst edition. In that context, M. Ivette Gomes2 remarks “its scope is much broader, and I would rather consider it a welcome addition to the reference works in applied statistics ... though there is a unifying basis provided by extreme value theory.” For the second edition, it is our declared aim to enforce this characteristic of providing a broad statistical background in the book. In Part V there is a continuation of the successful program concerning self– contained “Case Studies in Extreme Value Analysis” of other authors. The case studies in the ﬁrst edition are replaced by new ones with emphasis laid on environmental extreme value statistics. We thank Humberto Vaquera, Jos´e Villase˜ nor, Stuart Coles, J¨ urg H¨ usler, Daniel Dietrich, Dietmar Pfeifer, Pieter van Gelder and Dan Lungu for the new contributions. It was a pleasure to cooperate with several distinguished experts in various ﬁelds, namely, with John Nolan (sum–stable distributions), Edgar Kaufmann (rates of convergence and longevity of humans), Michael Falk (multivariate peaks– over–threshold), Jon Hosking (ﬂood frequency analysis), Michael Radtke (insurance) and Casper de Vries and Silvia Caserta (ﬁnance). The present statistical software environment is much more than an update of Xtremes, Version 2.1. As a consequence of our intention to establish a book about applied statistics—with a unifying basis provided by extreme value statistics—the Xtremes package becomes more and more applicable to various statistical ﬁelds. Further introductory remarks may be found in • Xtremes: Overview and the Hierarchy • Xtremes and StatPascal Within the Computing Environment RiskTec after the Prefaces and at the beginning of the Appendix. We would like to thank colleagues, readers and users of the ﬁrst edition and Xtremes for their comments, questions and suggestions; among others, Claudio Baraldi, Arthur B¨ oshans, Holger Drees, Harry Harper, Sylvia Haßmann, Claudia Kl¨ uppelberg, Elson Lee, Frank Marohn, Alexander McNeil, Richard Smith, Q.J. Wang, Carsten Wehn. Siegen, Germany

2 Gomes,

Rolf–Dieter Reiss Michael Thomas

M.I. (1999). Book Review: Statistical Analysis ... Extremes 2, 111–113.

Preface to the First Edition This textbook deals with the statistical modeling and analysis of extremes. The restriction of the statistical analysis to this special ﬁeld is justiﬁed by the fact that the extreme part of the sample can be of outstanding importance. It may exhibit a larger risk potential of random scenery such as ﬂoods, hurricanes, high concentration of air pollutants, extreme claim sizes, price shocks, incomes, life spans, etc. The fact that the likelihood of a future catastrophe is not negligible may initiate reactions which will help to prevent a greater disaster. Less spectacular yet important, the statistical insight gained from extremes can be decisive in daily business life or for the solution to ecological or technical problems. Although extreme value analysis has its peculiarities, it cannot be looked at in an isolated manner. Therefore, the analysis of extreme values must be embedded in other various approaches of main stream statistics such as data analysis, nonparametric curve estimation, survival analysis, time series analysis, regression analysis, robust statistics and parametric inference. The book is divided into Part I:

Modeling and Data Analysis;

Part II:

Statistical Inference in Parametric Models;

Part III:

Elements of Multivariate Analysis;

Part IV:

Topics in Insurance, Finance and Hydrology;

Part V:

Case Studies in Extreme Value Analysis,

Appendix: An Introduction to XTREMES. Whenever problems involving extreme values arise, statisticians in many ﬁelds of modern science and in engineering or the insurance industry may proﬁtably employ this textbook and the included software system XTREMES. This book is helpful for various teaching purposes at colleges and universities on the undergraduate and graduate levels. In larger parts of the book, it is merely presumed that the reader has some knowledge of basic statistics. Yet more and more statistical

x

Preface to the First Edition

prerequisites are needed in the course of reading this book. Several paragraphs and subsections about statistical concepts are intended to ﬁll gaps or may be regarded as shorter refresher units. Parts I and II (with the exception of Chapter 6) are elementary yet basic for the statistical analysis of extreme values. It is likely that a more profound statistical background is helpful for a thorough understanding of the advanced topics in Chapter 6 and the multivariate analysis in Part III. Part I sets out the statistical background required for the modeling of extreme values. The basic parametric models are introduced and theoretically justiﬁed in Chapter 1. The nonparametric tools introduced in Chapter 2 are most important for our approach to analyzing extreme values. In this context the included statistical software system is helpful to • get a ﬁrst insight into the data by means of visualizations; • employ a data–based parametric modeling and assess the adequacy; • draw statistical conclusions in a subjective manner; • carry out the statistical inference in an objective (automatic) manner, and • control results of parametric inference by nonparametric procedures. Part II deals with statistical procedures in the parametric extreme value (EV) and generalized Pareto (GP) models. Yet, at the beginning, we start with the statistical inference in normal and Poisson models (Chapter 3) in order to give an outline of our approach to statistical questions within a setting which is familiar to a larger readership. From our viewpoint, the Gaussian model is merely relevant for the center of a distribution and, thus, not for extreme values. Chapters 4 and 5 develop the statistical methodology that is necessary for dealing with extremes. Applied questions are addressed in various examples. These examples also include critical examinations of case studies in publications which are occasionally very ambitious. We will approach extreme value analysis from a practical viewpoint, yet references are given to the theoretical background (as developed in the books [24], [20], [39], [42] and [16]). Applied contributions to extreme value analysis can be found in several journals. It is recommended to have a look at the J. Hydrology, Insurance: Mathematics and Economics, J. Econometrics, J. Royal Statistical Society B and, particularly, at the forthcoming journal Extremes, Statistical Theory and Applications in Science, Engineering and Economics. Other valuable sources for applied work are the recent Gaithersburg proceeding volumes [15] and the hydrology proceedings [13]. Part III contains supplementary material about the analysis of multivariate data and auxiliary results for multivariate distributions applied in Part II. Initially, a textbook for univariate extremes was scheduled. Yet, it is evident that a time– scale must be included in conjunction with time series phenomena, for example, exceedance times and exceedances are jointly visualized in a scatterplot. This was

Preface to the First Edition

xi

our ﬁrst step towards multivariate data. Further extensions of our initial framework followed so that, ﬁnally, we decided to include some procedures concerning multivariate extremes. We also want to learn in which manner the methodology provided by the previous parts can be made applicable in certain areas. Part IV deals with important questions in • insurance (coauthored by Michael Radtke), • ﬁnance (coauthored by Casper G. de Vries), • hydrology. We hope that the explanations are also of interest for non–specialists. Part IV has a certain continuation in Part V which contains several case studies in extreme value analysis. The case studies are written in the form of self– contained articles, which facilitated the inclusion of studies of other authors. One basic requirement for any case study is that the underlying data must be publicly accessible because, otherwise, the hypotheses and conclusions of an analyst cannot be critically examined and further improved by others, which would strongly violate scientiﬁc principles. We would like to thank Ana M. Ferreira, Edgar Kaufmann, Cornelia Hillg¨ artner, Tailen Hsing and J¨ urg H¨ usler for their contributions. The appendix is a manual for the included statistical software XTREMES. The menu–driven part of XTREMES allows us to surf through data sets and statistical models and reduces the “start up” costs of working in this area. For special problems one may employ the integrated programming language XPL. A short overview of the hierarchy of XTREMES is given after this preface. We believe that an experienced reader can partially handle XTREMES after having read the overview. A further link between the book and the statistical software is provided by sections entitled “Implementation in XTREMES” at the end of the chapters. We will not make any attempt to give exhaustive references to the extreme value literature. Several footnotes provide hints to papers and books which are important from the historical viewpoint or may be helpful to get a more thorough understanding of special questions. The bibliography merely consists of references to monographs and proceeding volumes that are suggested for further reading or cited several times within the text. We are grateful to several colleagues for valuable suggestions and stimulating discussions, especially, Sandor Cs¨ org˝o, Richard A. Davis, Paul Embrechts, Michael Falk, Laurens de Haan, J¨ urg H¨ usler, Edgar Kaufmann, Alex Koning, Ross Leadbetter, Wolfgang Merzenich, Wolfgang Wefelmeyer. We would like to express particular gratitude to the coauthors of Chapters 9 and 10 who had a constructive impact on our work. Very special thanks are due to Sylvia Haßmann for collaboration on the MS–DOS version of XTREMES (documented in [16]) and for assistance in writing a ﬁrst draft of Section 6.1.

xii

Preface to the First Edition

Several generations of students were exposed to the development of this book and the included software system; we acknowledge warmly the assistance of Simon Budig (ﬁnal version of the UserFormula facility), Andreas Heimel (help system), Jens Olejak (minimum distance estimators), Claudia Schmidt (expert for the Moselle data) and Karsten Tambor (previous version of the multivariate mode of XTREMES). The technical assistance of Sarah Schultz and Maximilian Reiss was very helpful. Part of the work of the ﬁrst author was done as a guest professor at the Tinbergen Institute, Rotterdam, and visiting the Center for Stochastic Processes, Chapel Hill. Thanks are due to Laurens de Haan and Ross Leadbetter for their hospitality. The stimulating atmospheres of these institutions had a greater impact on the course of this work. The stay at the Tinbergen Institute also enabled the cooperation with Casper de Vries. Siegen, Germany

Rolf–Dieter Reiss Michael Thomas

Contents Preface to the Preface to the Preface to the List of Special

I

Third Edition . Second Edition First Edition . . Symbols . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. v . vii . ix . xviii

Modeling and Data Analysis

1

1 Parametric Modeling 1.1 Applications of Extreme Value Analysis . . . 1.2 Observing Exceedances and Maxima . . . . . 1.3 Modeling by Extreme Value Distributions . . 1.4 Modeling by Generalized Pareto Distributions 1.5 Heavy and Fat–Tailed Distributions . . . . . 1.6 Quantiles, Transformations and Simulations . 2 Diagnostic Tools 2.1 Visualization of Data . . . . . . . . . . . . 2.2 Excess and Hazard Functions . . . . . . . 2.3 Fitting Parametric Distributions to Data . 2.4 Q–Q and P–P Plots . . . . . . . . . . . . 2.5 Trends, Seasonality and Autocorrelation . 2.6 The Tail Dependence Parameter . . . . . 2.7 Clustering of Exceedances . . . . . . . . .

II

. . . .

. . . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

3 3 7 14 23 30 35

. . . . . . .

39 39 49 56 61 64 74 76

Statistical Inference in Parametric Models

3 An 3.1 3.2 3.3 3.4

Introduction to Parametric Inference Estimation in Exponential and Gaussian Models Conﬁdence Intervals . . . . . . . . . . . . . . . . Test Procedures and p–Values . . . . . . . . . . . Inference in Poisson and Mixed Poisson Models . xiii

. . . .

. . . .

81 . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

83 84 90 93 96

xiv

Contents 3.5

The Bayesian Estimation Principle . . . . . . . . . . . . . . . . . . 102

4 Extreme Value Models 107 4.1 Estimation in Extremes Value Models . . . . . . . . . . . . . . . . 107 4.2 Testing within Extreme Value Models . . . . . . . . . . . . . . . . 118 4.3 Extended Extreme Value Models and Related Models . . . . . . . 120 5 Generalized Pareto Models 5.1 Estimation in Generalized Pareto Models . . . . . . . 5.2 Testing Within Generalized Pareto Models . . . . . . . 5.3 Testing Extreme Value Conditions with Applications (co–authored by J. H¨ usler and D. Li) . . . . . . . . . . 5.4 Statistics in Poisson–GP Models . . . . . . . . . . . . 5.5 The Log–Pareto Model and Other Pareto–Extensions . 6 Advanced Statistical Analysis 6.1 Non–Random and Random Censoring . . . . 6.2 Models of Time Series, the Extremal Index . 6.3 Statistics for Student Distributions . . . . . . 6.4 Statistics for Sum–Stable Distributions (co–authored by J.P. Nolan) . . . . . . . . . . 6.5 Ultimate and Penultimate GP Approximation (co–authored by E. Kaufmann) . . . . . . . . 6.6 An Overview of Reduced–Bias Estimation (co–authored by M.I. Gomes) . . . . . . . . . 7 Statistics of Dependent Variables (coauthored by H. Drees) 7.1 The Impact of Serial Dependence . . 7.2 Estimating the Extreme Value Index 7.3 Extreme Quantile Estimation . . . . 7.4 A Time Series Approach . . . . . . .

127 . . . . . . . 127 . . . . . . . 143 . . . . . . . 144 . . . . . . . 152 . . . . . . . 154

159 . . . . . . . . . . . . 159 . . . . . . . . . . . . 164 . . . . . . . . . . . . 170 . . . . . . . . . . . . 172 . . . . . . . . . . . . 182 . . . . . . . . . . . . 190

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

207 208 209 215 219

8 Conditional Extremal Analysis 8.1 Interpretations and Technical Preparations . . . . 8.2 Conditional Extremes: a Nonparametric Approach 8.3 Maxima Under Covariate Information . . . . . . . 8.4 The Bayesian Estimation Principle, Revisited . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

227 227 238 240 242

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

9 Statistical Models for Exceedance Processes 9.1 Modeling Exceedances by Poisson Processes: the Homogeneous Case . . . . . . . . . . . . . . . . . . . . . . 9.2 Mean and Median T –Year Return Levels . . . . . . . . . . . . 9.3 ML and Bayesian Estimation in Models of Poisson Processes 9.4 GP Process Approximations (co–authored by E. Kaufmann) .

247 . . . .

. . . .

. . . .

247 250 252 256

Contents 9.5

III

xv

Inhomogeneous Poisson Processes, Exceedances Under Covariate Information . . . . . . . . . . . . . . 258

Elements of Multivariate Statistical Analysis

263

10 Basic Multivariate Concepts and Visualization 265 10.1 An Introduction to Basic Multivariate Concepts . . . . . . . . . . . 265 10.2 Visualizing Multivariate Data . . . . . . . . . . . . . . . . . . . . . 270 10.3 Decompositions of Multivariate Distributions . . . . . . . . . . . . 275 11 Elliptical and Related Distributions 11.1 Multivariate Gaussian Models . . . . . 11.2 Spherical and Elliptical Distributions . 11.3 Multivariate Student Distributions . . 11.4 Multivariate Sum–Stable Distributions (co–authored by J.P. Nolan) . . . . . .

279 . . . . . . . . . . . . . . . . 279 . . . . . . . . . . . . . . . . 281 . . . . . . . . . . . . . . . . 283 . . . . . . . . . . . . . . . . 285

12 Multivariate Maxima 12.1 Nonparametric and Parametric Extreme Value Models 12.2 The Gumbel–McFadden Model . . . . . . . . . . . . . 12.3 Estimation in Extreme Value Models . . . . . . . . . . 12.4 A Spectral Decomposition Methodology . . . . . . . .

. . . .

. . . .

. . . .

291 291 301 305 309

13 Multivariate Peaks Over Threshold (co–authored by M. Falk) 13.1 Nonparametric and Parametric Generalized Pareto Models . . . 13.2 Estimation of the Canonical Dependence Function . . . . . . . 13.3 About Tail Independence (co–authored by M. Frick) . . . . . . 13.4 The Point Process Approach to the Multivariate POT Method

. . . .

. . . .

313 313 318 321 333

IV

. . . .

. . . .

. . . .

. . . .

Topics in Hydrology and Environmental Sciences

14 Flood Frequency Analysis (co–authored by J.R.M. Hosking) 14.1 Analyzing Annual Flood Series . . . . . . . . 14.2 Analyzing Partial Duration Series . . . . . . . 14.3 Regional Flood Frequency Analysis . . . . . . 14.4 The L–Moment Estimation Method . . . . . 14.5 A Bayesian Approach to Regional Estimation

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

335

. . . . .

. . . . .

337 337 338 343 345 349

xvi

Contents

15 Environmental Sciences (co–authored by R.W. Katz) 15.1 Environmental Extremes . . . . . 15.2 Inclusion of Covariates . . . . . . 15.3 Example of Trend . . . . . . . . 15.4 Example of Cycle . . . . . . . . . 15.5 Example of Covariate . . . . . . 15.6 Numerical Methods and Software

V

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

Topics in Finance and Insurance

16 Extreme Returns in Asset Prices (co–authored by C.G. de Vries and S. Caserta) 16.1 Stylized Facts and Historical Remarks . . . . . 16.2 Empirical Evidence in Returns Series . . . . . . 16.3 Parametric Estimation of the Tails of Returns . 16.4 The Proﬁt/Loss Variable and Risk Parameters 16.5 Evaluating the Value–at–Risk (VaR) . . . . . . 16.6 The VaR for a Single Derivative Contract . . . 16.7 GARCH and Stochastic Volatility Structures . 16.8 Predicting the Serial Conditional VaR (co–authored by A. Kozek and C.S. Wehn) . .

Topics in Material and Life Sciences

353 353 356 359 361 364 367

369

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

371 372 375 378 382 386 392 395

. . . . . . . . . . . 401

17 The Impact of Large Claims on Actuarial Decisions (co–authored by M. Radtke) 17.1 Numbers of Claims and the Total Claim Amount . . . . 17.2 Estimation of the Net Premium . . . . . . . . . . . . . . 17.3 Segmentation According to the Probable Maximum Loss 17.4 The Risk Process and the T –Year Initial Reserve . . . . 17.5 Elements of Ruin Theory . . . . . . . . . . . . . . . . . 17.6 Credibility (Bayesian) Estimation of the Net Premium .

VI

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

411 412 415 419 426 432 434

439

18 Material Sciences 441 18.1 Extremal Corrosion Engineering . . . . . . . . . . . . . . . . . . . 441 18.2 Stereology of Extremes (co–authored by E. Kaufmann) . . . . . . . 445 19 Life Science (co–authored by E. Kaufmann) 453 19.1 About the Longevity of Humans . . . . . . . . . . . . . . . . . . . 453

Contents

xvii

19.2 Extrapolating Life Tables To Extreme Life Spans: A Regression Approach . . . . . . . . . . . . . . . . . . . . . . . . 458

Appendix: First Steps towards Xtremes and StatPascal

465

A The A.1 A.2 A.3 A.4 A.5

Menu System Installation . . . . . . . . . . . . . . Overview and the Hierarchy . . . . . Becoming Acquainted with the Menu Technical Aspects of Xtremes . . . . The UserFormula (UFO) Facilities .

B The B.1 B.2 B.3

StatPascal Programming Language 485 Programming with StatPascal: First Steps . . . . . . . . . . . . . . 486 Plotting Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490 Generating and Accessing Data . . . . . . . . . . . . . . . . . . . . 492

. . . . . . . . . . System . . . . . . . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

467 467 467 470 476 481

Author Index

495

Subject Index

501

Bibliography

509

List of Special Symbols F

distribution function (df); likewise we use symbols G, W etc. for dfs

Fµ,σ

df F with added location and scale parameters µ and σ; p. 16

F

survivor function of df F ; pages 11 and 266 x density of df F with ∞ f (y) dy = F (x); likewise, we use g, w etc.

f F −1

quantile function (qf) pertaining to the df F ; p. 40

F

[u]

exceedance df at u (truncation of df F left of u); p. 12

F

(u)

excess df at u (residual life df at age u) pertaining to the df F ; p. 49

Gi,α

standard extreme value (EV) df for maximum (ith submodel); p. 15

Gγ

standard extreme value (EV) df for maximum (uniﬁed model); p. 16

Wi,α

standard generalized Pareto (GP) df (ith submodel); p. 24

Wγ

standard generalized Pareto (GP) df (uniﬁed model); p. 25

Φ

standard normal (Gaussian) df; p. 31

F

m

mth power of df F (with F m (t) := (F (t))m ); p. 10

F m∗

mth convolution of df F ; p. 30

xi:n Fn

ith ordered value of data x1 , . . . , xn (in non–decreasing order); p. 42 sample df; occasionally written Fn (x; ·) to indicate the dependence on x = (x1 , . . . , xn ); p. 39

Fn−1

sample qf; p. 42

α(F )

left endpoint of df F ; p. 12

ω(F )

right endpoint of df F ; p. 11

I(y ≤ x)

indicator function with I(y ≤ x) = 1 of y ≤ x and 0, otherwise

E(X)

expectation of a random variable X

V (X)

variance of a random variable X

Cov(X,Y) covariance of random variables X and Y ; p. 71 and 267 x ¯ sample mean n1 i≤n xi (with i running from 1 to n); p. 41 1 ¯)2 ; p. 41 s2 sample variance n−1 i≤n (xi − x sample covariance between ith and jth component; p. 71 and 270

si,j d

X=Y

equality in distribution of X and Y ; p. 170

Part I

Modeling and Data Analysis

Chapter 1

Parametric Modeling Chapter 1 is basic for the understanding of the main subjects treated in this book. It is assumed that the given data are generated according to a random mechanism that can be linked to some parametric statistical model. In this chapter, the parametric models will be justiﬁed by means of mathematical arguments, namely by limit theorems. In this manner, extreme value (EV) and generalized Pareto (GP) models are introduced that are central for the statistical analysis of maxima or minima and of exceedances over a higher or lower threshold, see Sections 1.3 and 1.4. Yet, we do not forget to mention other distributions used in practice for the modeling of extremes. In Section 1.5 we especially deal with fat and heavy–tailed distributions such as, e.g., log–normal and Student distributions.

1.1

Applications of Extreme Value Analysis

At the beginning, the relevance of extreme value analysis to ﬂood frequency analysis, environmental sciences, ﬁnance and insurance (these areas are especially dealt with in Chapters 14–17) and other important topics is indicated. We start with ﬂood frequency analysis primarily because of historical reasons.

Flood Frequency Analysis The ultimate interest of ﬂood frequency analysis is the estimation of the T –year ﬂood discharge (water level), which is the discharge once exceeded on the average in a period of T years. Usually, the time span of 100 years is taken, yet the estimation is carried out on the basis of ﬂood discharges for a shorter period. Consequences of ﬂoods exceeding such a level can be disastrous. For example, 100–year ﬂood levels were exceeded by the great American ﬂood of 1993 that caused widespread devastations in the American Midwest (as pointed out in [13], Preface).

4

1. Parametric Modeling

Under standard conditions, the T –year level is a higher quantile of the distribution of discharges. Thus, one is primarily interested in a parameter determined by the upper tail of the distribution. Because ﬂood discharges of such a magnitude were rarely observed or are not recorded at all, a parametric statistical modeling is necessary to capture relevant tail probabilities. A careful checking of the validity of the parametric modeling is essential. If the statistical inference is based on annual maxima of discharges, then our favorite model is the Gumbel or the uniﬁed extreme value model, yet we also mention other models employed by hydrologists. Alternatively, the inference is based on a partial duration series, which is the series of exceedances over a certain higher threshold. In that case, our standard model for the ﬂood magnitudes is the generalized Pareto model or certain submodels suggested by the well–known index ﬂood procedure in regional ﬂood frequency analysis. We mention alternative models. A modeling of the exceedance times must be included. The regional ﬂood frequency provides the possibility to include information from data recorded at nearby gauging stations, respectively, sites having a similar characteristic.

The Actuary’s Interest in Extremes In recent years, actuaries have become more and more aware of the potential risk inherent in very large claim sizes due to catastrophic events. An insurer must compensate the losses—due to the payments for claims of policy holders—by means of an appropriate premium. Thereby, an actuary is ﬁrst of all interested in estimating the net premium which is the mean of the total claim amount for an individual or a portfolio (collection) of risks. The total claim amount depends on the size of claims and the frequency of claims within a given period. These two ingredients can be dealt with separately from the statistical viewpoint.

Claim Sizes

Claim Number ?

Total Claim Amount ?

Net Premium In conjunction with excess–of–loss (XL) reinsurance, when the reinsurer pays for the excess of a higher ﬁxed limit for individual claim sizes, a parametric modeling and estimation of the upper tail of the claim size distribution is of genuine interest to evaluate the net premium.

1.1. Applications of Extreme Value Analysis

5

Our favorite model is again the generalized Pareto model, yet we also study other distributions employed by actuaries (such as Benktander II and truncated Weibull distributions). For assessing the total premium, the actuary must also consider other parameters of the random losses besides the net premium. We will focus our attention on the interdependence between the ruin probability of a portfolio within a ﬁnite time horizon and the choice of an initial capital (reserve).

Extremes in Financial Time Series, Value at Risk Insurance and ﬁnancial data can be investigated from the viewpoint of risk analysis uhlmann2 ). Therefore, the insight (as initiated in the books by H.L. Seal1 and H. B¨ gained from insurance data can also be helpful for the understanding of ﬁnancial risks (and vice versa). Financial time series consist of daily or weekly reported speculative prices of assets such as stocks, foreign currencies or commodities such as corn, cocoa, coﬀee, sugar, etc. Risk management at a commercial bank is interested in guarding against the risk of high losses due to the fall in prices of ﬁnancial assets held or issued by the bank. It turns out that daily or weekly returns—relative diﬀerences of consecutive prices or diﬀerences of log–prices (log–returns)—are the appropriate quantities which must be investigated. Most importantly, there is empirical evidence that distributions of returns can possess fat or heavy tails so that a careful analysis of returns is required. In this context, we deal with the upper tail of loss/proﬁt distributions and, especially, with parameters, which summarize the potential risk to some extent, such as • the Value–at–Risk (VaR) as the limit which is exceeded by the loss (measured as a positive value) of a given speculative asset or a portfolio with a speciﬁed low probability, • the Capital–at–Risk (CaR) as the amount which may be invested with the possible consequence that the loss exceeds a given limit with a speciﬁed low probability. These two concepts are closely related to each other: we ﬁx either the invested capital (market value) or the limit and, then, compute the other variable. A special feature of return series is the alternation between periods of tranquility and volatility. Therefore, the VaR, which is essentially the q–quantile of the distribution of log–returns, should vary in time. The following illustration3 concerns the log–returns of the Standard & Poors 1 Seal,

H.L. (1969). Stochastic Theory of a Risk Business. Wiley, New York.

2 B¨ uhlmann,

H. (1970). Mathematical Methods in Risk Theory. Springer, Berlin.

are produced with the Frame Size (Print/EPS) facility in the local menus of the plot windows of Xtremes. 3 Illustrations

6

1. Parametric Modeling

0.02

1986

1980

1974

1968

1962

0.0

S&P500 log-returns

0.04

500 market index (stored in fm–poors.dat4 ).

time

Fig. 1.1. Scatterplot of the log–returns (with changed signs) of the S&P500 index from July 1962 to Dec 1987 and a moving sample 95%–quantile based on the preceding 90 days.

One recognizes the periods of higher volatility which are reﬂected by periods of higher sample q–quantiles and, thus, a higher VaR.

Material Sciences and Other Important Areas In most parts of the book, we do not focus our attention on special areas. Such a theoretical approach is justiﬁed by the fact that, to some extent, the basic statistical questions have a common feature for all the potential applications. We brieﬂy mention further questions for which extreme value analysis is of interest: • (Corrosion Analysis.) Pitting corrosion can lead to the failure of metal structures such as tanks and tubes. Extreme value analysis becomes applicable because pits of a larger depth are of primary interest. In analogy to the T –year discharge in hydrology one may estimate the T –unit depths which is the level once exceeded (within a given time span) on the average, if T units or an area of size T are exposed to corrosion. The role of time in other applications (e.g., in hydrology) is now played by the location of the pits, see Section 18.1. 4 Data sets *.dat can be found in the subdirectory xtremes\dat, if xtremes is taken as the working directory of Xtremes.

1.2. Observing Exceedances and Maxima

7

• (Telecommunication.) There exist several research papers about teletraﬃc data in conjunction with a discussion of the concepts of aggregation and self–similarity, see page 169. • (Strength of Material.) A sheet of metal breaks at its weakest point so that a minimum strength determines the quality of the entire sheet. Related topics are strength of bundles of threads and ﬁrst failure of equipments with many components, see [20], pages 188–196. • (Longevity of Human Life.) The insight gained from experiments led to statements such as “the studies are consistently failing to show any evidence for pre–programmed limit to human life span” which found their way to daily news papers5 . We will study such questions from the viewpoint of extreme value analysis, see Chapter 19. • (Environmental Sciences.) Higher concentration of certain ecological quantities, like concentration of ozone, acid rain or sulfur dioxide (SO2 ) in the air, are of greater interest due to the negative response on humans and, generally, on the biological system, see Chapter 15. Other important areas of applications include geology, meteorology and seismic risk analysis. It is self–evident that our list is by no means complete.

The T –Year Level and Related Parameters The T –year level (e.g., for discharges in ﬂood frequency analysis) plays an important role in our analysis. This parameter is dealt with, for example, in Sections 1.2 and 14.2. The same methodology can be applied to the T –unit depths in corrosion analysis, see Section 18.1. In a similar way, we deﬁne a T –year initial reserve in insurance (page 430) and a T –day capital in ﬁnance (page 390). These parameters are connected to certain small or large quantiles and must be estimated by the methods presented in this book.

1.2

Observing Exceedances and Maxima

It is understood that the reader is familiar with the concepts of a distribution function (df) F , a density f as the derivative of the df, and independent and identically distributed (iid) random variables X1 , . . . , Xn . The df of a real–valued random variable X is given by F (x) = P {X ≤ x}. The expectation and variance of a random variable X are denoted by E(X) and V (X). These quantities are the mean and the variance of the distribution of X. 5 Kolata,

G. New views on life spans alter forecasts on elderly. The New York Times, Nov. 16. 1992.

8

1. Parametric Modeling

Number of Exceedances over a Threshold One method of extracting upper extremes from a set of data x1 , . . . , xn is to take the exceedances over a predetermined, high threshold u. Exceedances yj over u (peaks–over–threshold (pot)) are those xi with xi > u taken in the original order of their outcome or in any other order. The values yj − u are the excesses over u. Subsequently, the number of exceedances over u will be denoted by k or, occasionally, by K to emphasize the randomness of this number. In many cases, the values below u are not recorded or cannot be observed by the statistician. Given random variables X1 , . . . , Xn , we may write K = i≤n I(Xi > u), where I(Xi > u) is an indicator function with I(Xi > u) = 1 if Xi > u holds and zero, otherwise. If the Xi are iid random variables with common df F , then n k P {K = k} = p (1 − p)n−k =: Bn,p {k}, k = 0, . . . , n, (1.1) k where Bn,p is the well–known binomial distribution with parameters n and p = 1 − F (u). The mean number of exceedances over u is Ψn,F (u) = np = n(1 − F (u)),

(1.2)

which deﬁnes a decreasing mean value function.

The Poisson Approximation of Binomial Distributions We give an outline of the well–known fact that the binomial distribution Bn,p can be replaced by a Poisson distribution and, thus, the number K of exceedances may be regarded as a Poisson random variable. Let X1 , . . . , Xn be iid random variables attaining the values 1 and 0 with probability p and, respectively, 1 − p. In conjunction with the number of exceedances, these random variables are of the special form I(Xi ≥ u). We have P {X1 + · · · + Xn = k} = Bn,p {k},

k = 0, . . . , n.

This formula can be rephrased by saying that success occurs with probability p and failure with probability 1 − p, then the total number of successes is governed by Bn,p . Note that np is the expected number of successes, and np(1 − p) is the variance. Poisson distributions can be ﬁtted to binomial distributions under certain conditions. If np(n) → λ as n → ∞, then Bn,p(n) {k} → Pλ {k}, where Pλ {k} =

λk −λ e , k!

n → ∞,

k = 0, 1, 2, 3, . . .

(1.3)

1.2. Observing Exceedances and Maxima

9

deﬁnes the Poisson distribution with parameter λ. In Fig. 1.2, the binomial and Poisson histograms Bn,p {k} and Pnp {k}, k = 0, . . . , 20, for the parameters n = 40 and p = 0.25 are displayed, see also the Demos A.1 and A.2.

0.1

Fig. 1.2. Fitting the Poisson distribution P10 (dark) to a binomial distribution B(40, .25) (light). 10

20

If X is a Poisson random variable with parameter λ, then E(X) = λ. In addition, the variance of X is V (X) = E(X −λ)2 = λ. We see that the expectation and the variance of a Poisson random variable are equal. It is well known that the inequality |Bn,p (A) − Pnp (A)| ≤ p

(1.4)

holds for each set A of nonnegative integers. Notice that the right–hand side of the inequality does not depend on n. Thus, a Poisson distribution can be ﬁtted to a binomial distribution whenever p is suﬃciently small. The iid condition, under which the Poisson approximation was formulated, can be weakened considerably, yet we do not go into details6 . In Section 3.4, we also introduce mixtures of Poisson distributions as, e.g., negative binomial distributions.

Maxima Assume that the given data yi are maxima, that is, yi = max{xi,1 , . . . , xi,m },

i = 1, . . . , n,

(1.5)

where the xi,j may not be observable. If the xi,j in (1.5) can be observed by the statistician, then taking maxima out of blocks is another possibility of extracting upper extreme values from a set of 6 We

refer to Haight, F.A. (1967). Handbook of the Poisson Distribution. Wiley, New York; for a more recent monograph see Barbour, A.D., Holst, L. and Janson, S. (1992). Poisson Approximation. Oxford Studies in Probability. Oxford University Press.

10

1. Parametric Modeling

data (besides taking exceedances). This method is called annual maxima, blocks or Gumbel method. For example, one takes the maximum values—such as maximum temperatures, water discharges, wind speeds, ozone concentrations, etc.—within a month or a year. For iid random variables X1 , . . . , Xm with common df F , one may easily compute the df of maxima; we have (1.6) P max Xi ≤ x = P {X1 ≤ x, . . . , Xm ≤ x} = F m (x). i≤m

Thus, the yi ’s in (1.5) are governed by F m if the xi,j ’s are governed by F . If the iid condition fails, then a df of the form F m may still be an accurate approximation of the actual df of the maximum. For independent, yet heterogem replaced by j≤m Fj . neous random variables X j with df Fj , (1.6) holds with F A df F m can be ﬁtted to j≤m Fj if the deviations of the Fj from each other can be neglected. Likewise, if there is a slight dependence in the data, a df of the form F m may still serve as an approximation of the actual df of the maximum. It is plausible to employ this approach in more complex situations as well. In Section 1.3, we go one step further and replace F m by an extreme value (EV) df G. The EV distributions constitute a parametric model which will be introduced in Section 1.3. We mention a special EV df, namely the Gumbel df G0 (x) = exp(−e−x ), which plays a central role within the extreme value analysis. Example 1.2.1. (Annual Wind–Speed Maxima at Vancouver.) We present annual maxima of daily measurements of wind speeds taken from [21], page 122 (stored in the ﬁle em–cwind.dat). Table 1.1. Annual wind–speed maxima in km/h from 1947 to 1984 at Vancouver. year speed year speed year speed year speed year speed year speed year speed 47 48 49 50 51 52

79.5 68.4 74.0 59.2 74.0 64.8

53 54 55 56 57 58

64.8 59.2 79.5 62.9 59.2 68.2

59 60 61 62 63 64

64.8 88.8 88.8 75.8 68.4 68.4

65 66 67 68 69 70

61.0 51.8 62.9 64.8 61.0 61.0

71 72 73 74 75 76

70.3 68.4 55.5 64.8 77.7 57.3

77 78 79 80 81 82

48.1 53.6 55.5 62.9 61.0 61.0

83 84

51.8 48.1

Such data can be visualized by means of nonparametric tools such as, e.g., kernel densities (see Section 2.1). One may try to ﬁt a parametric density—e.g., a Gumbel density with location and scale parameters µ and σ—to the sample density. In Fig. 1.3, one can recognize a reasonable ﬁt of a Gumbel density to the data (represented by a sample density). For a continuation, see Example 2.1.3.

1.2. Observing Exceedances and Maxima

11

0.04

0.02

0.0

Fig. 1.3. Representing the wind– speed data by a ﬁtted Gumbel density (µ = 60.3 and σ = 8.3) and a kernel density.

50

100

75 wind-speed in km/h

Minima Generally, results for minima can be deduced from corresponding results for maxima by writing min Xi = − max(−Xi ). i≤n

i≤n

In conjunction with minima, it can be useful to present results in terms of the survivor function (1.7) F = 1 − F. Utilizing the same arguments as in (1.6), one may compute the survivor function of the minimum of iid random variables Xi with common df F . We have m (1.8) P min Xi > x = (1 − F (x))m = F (x). i≤m

Therefore, the df of the minimum is P min Xi ≤ x = 1 − (1 − F (x))m . i≤m

(1.9)

Actual dfs of minima will be replaced by converse EV dfs in Section 1.3 (see page 22). As an example of a converse EV df, we mention the converse Gumbel df 0 (x) = 1 − G0 (−x) = 1 − exp(−ex ), G

(1.10)

which is also called Gompertz df.

Magnitudes of Exceedances and Upper Order Statistics Let the xi be governed again by a df F and let the threshold u be smaller than the right endpoint ω(F ) := sup{x : F (x) < 1} of the support of F . We speak of a high

12

1. Parametric Modeling

threshold u, if u is close to the right endpoint ω(F ). In that case, p = 1 − F (u) is small and the number k of exceedances may be regarded as a Poisson random variable. Subsequently, we deal with the magnitudes (sizes) of the exceedances. Exceedances occur conditioned on the event that an observation is larger than the threshold u. The pertaining conditional df F [u] is called exceedance df at u. If X denotes a random variable with df F , then F [u] (x)

= = =

P (X ≤ x|X > u) P {X ≤ x, X > u}/P {X > u} F (x) − F (u) , x ≥ u. 1 − F (u)

(1.11)

In terms of survivor functions we may write F [u](x) = F (x)/F (u),

x ≥ u.

(1.12)

One should keep in mind that the left endpoint α(F [u] ) = inf{x : F [u] (x) > 0} of F is equal to u. The relationship between exceedances and the exceedance df will be examined more closely in (2.4). Moreover, generalized Pareto (GP) dfs will be ﬁtted to exceedance dfs F [u] in Section 1.4. Another closely related approach of extracting extreme values from the data is to take the k largest values xn−k+1:n ≤ · · · ≤ xn:n of the xi , where the number k is predetermined. Notice that xn:n is the maximum. Within this approach, the (k + 1)th largest observation xn−k:n may be regarded as a random threshold. [u]

The T –Year Level One of the major objectives of extreme value analysis is the estimation of the T –year level. We introduce the T –year level u(T ) as the threshold u(T ) such that the mean number of exceedances over u(T ) within the time span of length T is equal to 1. In this context, it is understood that for each year (or any other period like day, month or season), there is one observation. Let X1 , X2 , . . . , XT be random variables with common df F . Then, u(T ) is the solution to the equation

E I(Xi ≥ u) = 1. (1.13) i≤T

Apparently,

u(T ) = F −1 (1 − 1/T )

(1.14)

which is the (1 − 1/T )–quantile of the df F (also see Section 1.6). We have 1 T and, thus, the T –year level u(T ) is exceeded by the observation in the given year (period) with probability 1/T . P {X1 > u(T )} = 1 − F (u(T )) =

1.2. Observing Exceedances and Maxima

13

Exceedance Times and the T –Year Return Level The primary aim of the following lines is to outline why the T –year level u(T ) = F −1 (1 − 1/T ) is also called T –year return level. In this context, we also get a diﬀerent interpretation of the T –year level. Besides the number and sizes of exceedances, one is interested in the times at which the exceedances occur. Given x1 , . . . , xn , let xi(1) , . . . , xi(k) be the exceedances over a predetermined threshold u. Let i(1) ≤ i(2) ≤ · · · ≤ i(k) be the ordered exceedance times. In conjunction with exceedance times, we are primarily interested in the future occurrence of the next exceedance at a certain higher threshold u for an inﬁnite time horizon. Therefore, one must consider an inﬁnite sequence X1 , X2 , X3 , . . . of random variables with common df F . The ﬁrst exceedance time at u is τ1 = min{m : Xm > u},

(1.15)

whereby it is understood that the threshold u is smaller than the right endpoint ω(F ) of F . We also deal with the random ordered exceedance times τ1 < τ2 < τ3 < · · · at the threshold u. Occasionally, we also write τr,u instead of τr for the rth exceedance time to emphasize the dependence on the threshold u. The exceedance times may be deﬁned recursively by τr = min{m > τr−1 : Xm > u},

r > 1.

(1.16)

The sequence of exceedance times has independent, geometrically distributed increments called return periods or interarrival times, see (1.17) and (1.21). Note that P {τ1 = k} = =

P {X1 ≤ u, . . . , Xk−1 ≤ u, Xk > u} p(1 − p)k−1 ,

k = 1, 2, 3, . . . ,

(1.17)

with p = 1 − F (u), where the latter equality holds for iid random variables. Thus, the ﬁrst exceedance time τ1 at u is distributed according to a geometric distribution with parameter p. Consequently, the mean of the ﬁrst exceedance time—also called mean return period—at u is E(τ1,u ) = 1/p. A threshold u such that the mean ﬁrst exceedance time is equal to T is the T –year return level. Thus, the T –year return level is the solution to the equation E(τ1,u ) =

1 = T. 1 − F (u)

(1.18)

This equation has the same solution as equation (1.13), namely u(T ) = F −1 (1 − 1/T ).

(1.19)

14

1. Parametric Modeling

This means that the T –year level in (1.14) and the T –year return level coincide under the present conditions. The ﬁrst exceedance time τ1,u(T ) at the T –year level u(T ) is a geometric random variable with parameter 1/T . By the deﬁnition of u(T ), we have E(τ1,u(T ) ) = T . In addition, the variance is V (τ1,u(T ) ) = (T − 1)T. A justiﬁcation for the names “mean return period” and “return level” is provided by the fact that the return periods τ1 , τ2 − τ1 , τ3 − τ2 , . . .

(1.20)

are iid random variables. This yields that the mean return periods E(τr+1 −τr ) are equal to the mean ﬁrst exceedance time E(τ1 ). Also, the threshold u such that the mean return period is equal to T is the T –year return level in (1.14) and (1.19). The iid property can be veriﬁed easily. For positive integers k(1), . . . , k(r), we have P {τ1 = k(1), τ2 − τ1 = k(2), . . . , τr − τr−1 = k(r)} = P {τ1 = k(1), τ2 = k(1) + k(2), . . . , τr = k(1) + · · · + k(r)} = P {X1 ≤ u, . . . , Xk(1)−1 ≤ u, Xk(1) > u, Xk(1)+1 ≤ u, . . . , Xk(1)+···+k(r) > u} P {τ1 = k(j)}. =

(1.21)

j≤r

Generally, one may verify that k−1 r P {τr = k} = p (1 − p)k−r r−1

(1.22)

for k = r, r + 1, . . . and, hence, the rth exceedance time is a negative binomial random variable with parameters r and p = 1 − F (u) shifted to the right by the amount r.

1.3

Modeling by Extreme Value Distributions

The actual df of a maximum will be replaced by an extreme value (EV) df. First, we give a list of the standard EV dfs Gi,α and Gγ within three submodels and a uniﬁed model, where α and γ are certain shape parameters. The pertaining densities are denoted by gi,α and gγ . One must include location and scale parameters µ and σ to build the full statistical models. At the end of this section, we will also mention corresponding questions concerning minima.

1.3. Modeling by Extreme Value Distributions

15

The α–Parameterization Here is a list of the three diﬀerent submodels by writing down the standard EV dfs for the diﬀerent shape parameters α: Gumbel (EV0):

G0 (x) = exp(−e−x ),

Fr´echet (EV1), α > 0:

G1,α (x) = exp(−x−α ),

Weibull (EV2), α < 0:

G2,α (x) = exp(−(−x)−α ),

for all x; x ≥ 0; x ≤ 0.

The Fr´echet df G1,α is equal to zero if x < 0; the Weibull df G2,α is equal to one if x > 0. We see that each real parameter α determines a standard EV distribution. Notice that G2,−1 is the exponential df on the negative half–line. Occasionally, the standard Gumbel df G0 is also denoted by G0,α . Warning! Our parameterization for Weibull dfs diﬀers from the standard one used in statistical literature, where Weibull dfs with positive shape parameters are taken.

We also note the pertaining densities g = G of the standard EV dfs: Gumbel (EV0):

g0 (x) = G0 (x)e−x ,

Fr´echet (EV1), α > 0:

g1,α (x) = αG1,α (x)x−(1+α) ,

Weibull (EV2), α < 0:

g2,α (x) = |α|G2,α (x)(−x)−(1+α) ,

for all x; x ≥ 0; x ≤ 0.

EV densities are unimodal. Remember that a distribution and the pertaining density f are called unimodal if the density is non–decreasing left of some point u and non–increasing right of u. Then, u is called a mode. Fr´echet densities and the Gumbel density are skewed to the right. Weibull dfs provide a very rich family of unimodal dfs. Weibull densities • are skewed to the left if α is larger than −3.6 and have a pole at zero if α > −1, • look symmetrical if α is close to −3.6, • are skewed to the right—such as Fr´echet and Gumbel densities—if α is smaller than −3.6.

16

1. Parametric Modeling

Location and Scale Parameters If a random variable X has the df F , then µ+σX has the df Fµ,σ (x) = F ((x−µ)/σ), where µ and σ > 0 are the location and scale parameters. Full EV models are obtained by adding location and scale parameters µ and σ > 0. By G0,µ,σ (x) = exp(−e−(x−µ)/σ )

and Gi,α,µ,σ (x) = Gi,α

x−µ , σ

i = 1, 2,

one obtains Gumbel, Fr´echet and Weibull dfs with location and scale parameters µ and σ. We see that the location parameter µ is the left endpoint of the Fr´echet df G1,α,µ,σ and the right endpoint of the Weibull df G2,α,µ,σ . Furthermore, g0,µ,σ (x) = and

1 −(x−µ)/σ e exp(−e−(x−µ)/σ ) σ

x−µ 1 , gi,α,µ,σ (x) = gi,α σ σ

i = 1, 2,

are the densities of the Gumbel df G0,µ,σ and the Fr´echet and Weibull dfs Gi,α,µ,σ .

The γ–Parameterization Up to now, the three diﬀerent EV models are separated from each other. Yet a visualization of these dfs—or of the pertaining densities—shows that Fr´echet and Weibull dfs attain the shape of a Gumbel df when the shape parameter α goes to ∞ and, respectively, to −∞. By taking the reparameterization γ = 1/α—due to von Mises7 (also frequently attributed to Jenkinson8 )—of EV dfs Gi,α one obtains a continuous, uniﬁed model. In this representation, the Gumbel df again has the parameter γ equal to zero. The standard versions in the γ–parameterization are deﬁned such that Gγ (x) → G0 (x),

γ → 0.

(1.23)

This is achieved by employing appropriate location and scale parameters in addition to the reparameterization γ = 1/α. Thus, EV dfs with certain location 7

Mises von, R. (1936). La distribution de la plus grande de n valeurs. Rev. Math. Union Interbalcanique 1, 141–160. Reproduced in Selected Papers of Richard von Mises, Amer. Math. Soc. 2 (1964), 271–294. 8

Jenkinson, A.F. (1955). The frequency distribution of annual maximum (or minimum) values of meteorological elements. Quart. J. Roy. Meteorol. Soc. 81, 158–171.

1.3. Modeling by Extreme Value Distributions

17

and scale parameters unequal to zero and one are taken as the standard EV dfs in the γ–parameterization if γ = 0. We have G0 (x) = exp(−e−x ), and

for all x,

Gγ (x) = exp − (1 + γx)−1/γ ,

1 + γx > 0, 1/γ

By applying the well–known formula (1 + γx) may verify that (1.23) holds. Notice that

(1.24) γ = 0.

(1.25)

→ exp(x) as γ → 0, one

• G0 is the standard Gumbel df; • Gγ is a Fr´echet df if γ > 0, • Gγ is a Weibull df if γ < 0. The right endpoint of a Weibull df Gγ is equal to 1/|γ| and the left endpoint of the Fr´echet df Gγ is equal to −1/γ. For γ = 1/α = 0, one obtains the representation Gγ = Gi,α,−α,|α|

(1.26)

with i = 1 if γ > 0 and i = 2 if γ < 0. The pertaining densities are g0 (x) = G0 (x)e−x , and

gγ (x) = Gγ (x)(1 + γx)−(1+1/γ) ,

for all x, 1 + γx > 0,

γ = 0.

Also, check that gγ (x) → g0 (x) as γ → 0. Some EV densities around the Gumbel density are displayed in Fig. 1.4.

0.4

0.2

-2

0.2

2

4

-2

2

4

Fig. 1.4. (left.) Gumbel density (dashed) and two Fr´echet (solid) densities for parameters γ = .28, .56. (right.) Gumbel density (dashed) and two Weibull (solid) densities for parameters γ = −.28, −.56.

On the right–hand side, we see the Weibull density with shape parameter γ = −.28 (that is, α = −3.6) that looks symmetrical and can hardly be distinguished from a normal (Gaussian) density. Recall that a Weibull density gγ has the ﬁnite right endpoint 1/|γ|. We have ω(G−.28 ) = 3.6 and ω(G−.56 ) = 1.8.

18

1. Parametric Modeling

Limiting Distributions of Maxima Recall from (1.6) that maxi≤n Xi has the df F n , if X1 , . . . , Xn are iid random variables with common df F . The choice of Fr´echet, Weibull and Gumbel dfs for modeling dfs of maxima becomes plausible from the subsequent remarks: (Fisher–Tippett9 .) If F n (bn + an x) has a non–degenerate limiting df as n → ∞ for constants bn and an > 0, then |F n (x) − G ((x − µn )/σn ))| → 0,

n → ∞,

(1.27)

for some EV df G ∈ {G0 , G1,α , G2,α } or G = Gγ and location and scale parameters µn and σn > 0. If (1.27) holds, then F belongs to the max–domain of attraction of the EV df G; in short, F ∈ D(G). For lists of suitable constants bn and an > 0, we refer to (1.31) and (2.33), whereby the constants in (2.33) are applicable if a certain von Mises condition is satisﬁed. Additionally, convergence also holds in (1.27) for the pertaining densities if F is one of the usual continuous textbook dfs. The illustrations in Fig. 1.5 concern the Gumbel approximation of the maximum of exponential random variables for a sample of size n = 30.

0.4 0.02

0.2

2

4

6

8

-0.02 2

4

6

8

30 Fig. 1.5. (left.) Density f of df 1 − e−x (solid) and Gumbel density g0,µ,σ (dotted) for parameters µ = 3.4 and σ = .94. (right.) Plot of the diﬀerence f − g0,µ,σ .

It can be easily veriﬁed that (1.27) holds if, and only if, nF (bn + an x) → − log G(x),

n → ∞,

(1.28)

for every x in the support of G, where again F = 1 − F is the survivor function. According (1.2), this relation concerns the asymptotic behavior of the mean number of exceedances over the threshold u(n) = µn + σn x. 9 Fisher,

R.A. and Tippett, L.H.C. (1928). Limiting forms of the frequency distribution of the largest or smallest member of a sample. Proc. Camb. Phil. Soc. 24, 180–190.

1.3. Modeling by Extreme Value Distributions

19

More reﬁned necessary and suﬃcient conditions for (1.27) are due to Gnedenko and de Haan, see, e.g., [16], Theorem 2.1.1 and Section 6.510 . A discussion about the accuracy of such approximations may also be found in Section 6.5. If condition (1.27) does not hold or it merely holds with a low rate, then the situation is classiﬁed as the “horror case” by some authors. We simply suggest to use a diﬀerent modeling.

The Max–Stability EV dfs are characterized by their max–stability. A df F is max–stable if F n (bn + an x) = F (x)

(1.30)

for a suitable choice of constants bn and an > 0. Thus, the standardized maximum under the df F is distributed according to F . We give a list of these constants when the max–stable df is one of the standard EV dfs. Gumbel Fr´echet Weibull

G0 : G1,α , α > 0: G2,α , α < 0:

bn = log n, bn = 0, bn = 0,

an = 1, an = n1/α , an = n1/α .

(1.31)

For example, Gn2,−1 (x/n) = G2,−1 (x) for the exponential df G2,−1 on the negative half–line. The constants in (1.31) will also be used in Section 6.5 to show the convergence of F n (bn + an x) to an EV df for a larger class of dfs F .

Moments and Modes of Extreme Value Distributions The jth moment E(X j ) of a Fr´echet or a Weibull random variable X can be written in terms of the gamma function ∞ Γ(λ) = xλ−1 e−x dx, λ > 0. (1.32) 0

Recall that Γ(λ + 1) = λΓ(λ) and Γ(1) = 1. If X has the df G and density g = G , then the jth moment can be written as j j mj,G := E(X ) = x dG(x) = xj g(x) dx. (1.33) 10 For example, a df F belongs to the max–domain of attraction of the EV df G with γ γ > 0 if, and only if, ω(F ) = ∞ and

F(tx)/F(t) →t→∞ x−1/γ ,

x > 0.

The standardizing constants may be chosen as bn = 0 and an = F −1 (1 − 1/n).

(1.29)

20

1. Parametric Modeling

Occasionally, the index G will be omitted. We also write mG = m1,G for the mean of G. By applying the substitution rule, one obtains mj,G1,α = Γ(1 − j/α),

if α > j,

and mj,G2,α = (−1)j Γ(1 − j/α). The jth moment of the Fr´echet df G1,α is inﬁnite if α ≤ j. This is due to the fact that the upper tail of the Fr´echet density g1,α (x) is approximately equal to αx−(1+α) . In that context, one speaks of heavy upper tails of Fr´echet distributions. For the special case j = 1, one obtains the mean values of Fr´echet and Weibull dfs. We have if α > 1, mG1,α = Γ(1 − 1/α), and mG2,α = −Γ(1 − 1/α). Especially the ﬁrst moment is inﬁnite whenever 0 < α ≤ 1. In contrast to the usual textbook analysis, we are also interested in such distributions. If the actual distribution is of that type, then a single extreme observation may dominate all the other observations and destroy the performance of a statistic connected to the mean. This is one of the reasons why we are also interested in other functional parameters of GP dfs such as q–quantiles with the median as a special case, cf. Section 1.6. For centered moments one obtains in analogy to (1.33),

j j E (X − E(X)) = (x − m1 ) dG(x) = (x − m1 )j g(x) dx, where m1 = m1,G . For j = 2 one obtains the variance. The variances varGi,α of Fr´echet and Weibull dfs can be deduced easily, because var = m2 − m21 . We have varGi,α = Γ(1 − 2/α) − Γ2 (1 − 1/α),

if 1/α < 1/2.

In the γ–parameterization, the mean and variance of an EV df is given by mGγ = (Γ(1 − γ) − 1)/γ, and

varGγ = Γ(1 − 2γ) − Γ2 (1 − γ) /γ 2 ,

if γ < 1,

if γ < 1/2.

The case γ = 0 is included in the latter formulas by considering limits with γ tending to zero. We have ∞ mG0 = lim mGγ = (− log x)e−x dx = λ, (1.34) γ→0

0

1.3. Modeling by Extreme Value Distributions

21

where λ = 0.577216 . . . is Euler’s constant. Moreover, varG0 = lim varGγ = π 2 /6,

(1.35)

γ→0

and

m2,G0 = λ2 + π 2 /6. Normalizing centered moments by the standard deviation var1/2 one obtains E

X − EX

j

1/2

=

E(X − EX)j j/2

varG

.

(1.36)

varG

For j = 1, 2, the normalized, centered moments are equal to zero and one, respectively. For j = 3, one obtains the skewness coeﬃcient of G skewG =

E(X − EX)3 3/2

,

(1.37)

varG

if α > 3 or γ < 1/3, and X is a random variable with df G. Note that skew = (m3 − 3m1 m2 + 2m31 )/σ 3 . The 4th normalized, centered moment is the kurtosis, cf. page 31. Check that the normalized, centered moments are independent of location and scale parameters. In Figure 1.6, the skewness coeﬃcient of EV dfs Gγ is plotted against γ. The skewness coeﬃcient is equal to zero at γ0 = −.2776 . . . in accordance with the remark on page 15 that the density of the Weibull df with shape parameter γ = −.28 (or α = −3.6) looks symmetrical. We have skewGγ > 0, if γ > γ0 , and skewGγ < 0, if γ < γ0 . Furthermore, skewG0 = 1.1395 . . . . 10

5

-0.4

-0.2

0.2

Fig. 1.6. Plotting the skewness coeﬃcients skewGγ against γ < 1/3.

shape parameter

Finally, we deal with the unique modes, cf. page 15, of EV dfs G which will be denoted by modG . We have modG1,α = (α/(1 + α))1/α

22

1. Parametric Modeling

and, thus, modG1,α → 0 as α → 0 and modG1,α → 1 as α → ∞. In addition, modG2,α = 0, if −1 ≤ α < 0, and modG2,α = −(α/(1 + α))1/α ,

α < −1.

Thus, modG2,α → 0 as α → −1 and modG2,α → −1 as α → −∞. In the γ– parameterization there is

modGγ = (1 + γ)−γ − 1 /γ,

γ = 0,

and the mode of the standard Gumbel distribution G0 is zero.

Limiting Distributions of Minima There is a one–to–one relationship between limiting dfs of maxima and minima. If n → ∞, P max(−Xi ) ≤ bn + an z → G(z), i≤n

then

P min Xi ≤ dn + cn z → 1 − G(−z), i≤n

n → ∞,

with cn = an and dn = −bn (and vice versa). This yields that the limiting dfs of sample minima are the converse Gumbel, Fr´echet and Weibull dfs i,α (x) = 1 − Gi,α (−x) G

(1.38)

in the α–parameterization, and γ (x) = 1 − Gγ (−x) G

(1.39)

in the γ–parameterization. Moreover, if Gi,α,µ,σ or Gγ,µ,σ is the df of −Yi , then i,α,−µ,σ or G γ,−µ,σ is the df of Yi . G of minima are also called extreme value dfs or, if necessary, The limiting dfs G converse extreme value dfs. Here are three special cases: 0 is also called Gompertz df; this is the df that • the converse Gumbel df G satisﬁes the famous Gompertz law, see page 54; 2,−1 is the exponential df on the positive half–line, • G 2,−2 is the Rayleigh df that is also of interest in other statistical appli• G cations. Note the following relationship: if the areas of random circles are exponentially distributed, then the diameters have a Rayleigh df.

1.4. Modeling by Generalized Pareto Distributions

23

The Min–Stability The limiting dfs of minima—these are the converse EV dfs—are characterized by the min–stability. A df F is min–stable if (1.40) P min Xi ≤ dn + cn x = 1 − (1 − F (dn + cn x))n = F (x) i≤n

for a certain choice of constants dn and cn > 0, where X1 , . . . , Xn are iid random variables with common df F . The min–stability can be expressed in terms of the survivor function F = 1 − F of F . We have n (1.41) P min Xi > dn + cn x = F (dn + cn x) = F (x). i≤n

Some Historical Remarks We compare the symbols employed for EV dfs in this textbook with others also used in relevant statistical publications: Gumbel Fr´echet Weibull

EV0 EV1 EV2

G0 G1,α G2,α

Type I Type II Type III

Λ Φα Ψα

In this book—as in many statistical textbooks—the normal (Gaussian) df is denoted by Φ and, therefore, the same symbol cannot be used for the Fr´echet df. By combining the numbering of EV dfs in [20] with the letter G used in [39] (presumably, in honor of B.V. Gnedenko), one obtains the symbol Gi,α for EV dfs also taken in [42] and [16]. In contrast to the latter representation, the Gumbel df also gets the parameter α = 0 in the present α–parameterization. The books [20] by J. Galambos and [39] by M.R. Leadbetter, G. Lindgren and H. Rootz´en, together with the booklet [25] by L. de Haan, laid the probabilistic foundations of modern extreme value theory. We refer to [20] and [42] for a more detailed account of the history.

1.4

Modeling by Generalized Pareto Distributions

The standard generalized Pareto (GP) dfs Wi,α and Wγ are the adequate parametric dfs for exceedances, cf. also (1.11). The pertaining densities are denoted by wi,α and wγ . There is the simple analytical relationship W (x) = 1 + log G(x), between GP dfs W and EV dfs G.

if

log G(x) > −1,

24

1. Parametric Modeling

The α–Parameterization First we introduce a representation for GP dfs within three submodels corresponding to that for EV dfs. Exponential (GP0):

W0 (x) = 1 − e−x ,

Pareto (GP1), α > 0:

W1,α (x) = 1 − x−α ,

Beta (GP2), α < 0:

W2,α (x) = 1 − (−x)−α ,

x ≥ 0, x ≥ 1, −1 ≤ x ≤ 0.

The exponential df W0 is equal to zero for x < 0; the Pareto dfs W1,α are equal to zero for x < 1; the beta dfs W2,α are equal to zero for x < −1 and equal to 1 for x > 0. Note that W2,−1 is the uniform df on the interval [−1, 0]. One should be aware that the dfs W2,α constitute a subclass of the usual family of beta dfs. Subsequently, when we speak of beta dfs only dfs W2,α are addressed (except of those in Section 4.3, where we mention the full beta family). Warning! Our parameterization for beta dfs diﬀers from the standard one used in the statistical literature, where beta dfs with positive shape parameters are taken.

Once more, we also note the pertaining densities w = W : Exponential (GP0):

w0 (x) = e−x ,

Pareto (GP1), α > 0:

w1,α (x) = αx−(1+α) ,

Beta (GP2), α < 0:

w2,α (x) = |α|(−x)−(1+α) ,

x ≥ 0, x ≥ 1, −1 ≤ x < 0.

The Pareto and exponential densities are decreasing on their supports. This property is shared by beta densities with shape parameter α < −1. For α = −1, one gets the uniform density on [−1, 0] as mentioned above. Finally, the beta densities with shape parameter α > −1 are increasing, having a pole at zero. We see that a GP density wi,α possesses an upper tail similar (asymptotically equivalent) to that of an EV density gi,α . Roughly speaking, the EV density is a GP density tied down near the left endpoint. Again, one must add location and scale parameters µ and σ > 0 in order to obtain the full statistical families of GP dfs. Notice that the left endpoint of the Pareto df W1,α,µ,σ (x) = W1,α ((x − µ)/σ) is equal to µ + σ.

1.4. Modeling by Generalized Pareto Distributions

25

The γ–Parameterization The uniﬁed GP model is obtained by applying a representation that corresponds to that for EV dfs in Section 1.3. The standard versions are deﬁned such that Wγ (x) → W0 (x),

γ → 0.

(1.42)

By putting γ = 1/α and choosing location and scale parameters as in Section 1.3, the GP dfs in the γ–parameterization are W0 (x) = 1 − e−x for x > 0, and ⎧ γ > 0; ⎨ 0 < x, if Wγ (x) = 1 − (1 + γx)−1/γ for ⎩ 0 < x < 1/|γ|, γ < 0. It is straightforward to verify that (1.42) holds for this choice of standard GP distributions. Note that W0 is the standard exponential df again. Corresponding to (1.26), we have for γ = 1/α = 0, Wγ = Wi,α,−α,|α| with i = 1 if γ > 0 and i = 2 if γ < 0. The left endpoint of Wγ is equal to zero for all γ. Therefore, the γ–parameterization has the additional advantage that the location parameter is always the left endpoint of the support of the distribution. The pertaining densities wγ = Wγ are w0 (x) = e−x , x > 0, if γ = 0, and ⎧ γ > 0; ⎨ 0 ≤ x, wγ (x) = (1 + γx)−(1+1/γ) for if ⎩ 0 ≤ x < 1/|γ|, γ < 0. The convergence wγ (x) → w0 (x) as γ → 0 holds again. In Fig. 1.7, Pareto and beta densities around the exponential density are displayed. One can recognize that the left endpoint of a standard GP distribution Wγ is equal to zero; the right endpoint is ﬁnite in the case of beta (GP2) distributions.

The POT–Stability GP dfs are the only continuous dfs F such that for a certain choice of constants bu and au , F [u] (bu + au x) = F (x), where F [u] (x) = (F (x)−F (u))/(1−F (u)) is again the exceedance df at u pertaining to F as introduced in (1.11). This property is the pot–stability of GP dfs. The following three examples are of particular interest: • for exponential dfs with left endpoint equal to zero, [u]

W0,0,σ = W0,u,σ ;

(1.43)

26

1. Parametric Modeling

1

1

0.5

0.5

2

4

2

4

Fig. 1.7. (left.) Exponential (dashed) and Pareto (solid) densities for parameters γ = .5, 1.0. (right.) Exponential (dashed) and beta (solid) densities for parameters γ = −.3, −.5.

• for Pareto dfs W1,α,µ,σ in the α–parameterization with µ + σ < u, [u]

W1,α,µ,σ = W1,α,µ,u−µ ,

(1.44)

• for GP dfs Wγ,µ,σ in the γ–parameterization with µ 0, [u] = Wγ,u,σ+γ(u−µ) , Wγ,µ,σ

(1.45)

whereby (1.43) is a special case. According to these relations the truncated version of a GP distribution remains in the same model, a property that exhibits the outstanding importance of GP distributions for our purposes. A beta df, truncated left of 1, is displayed in Fig. 1.8. 1

0.5

Fig. 1.8. Beta df W−0.3 (solid) and [1] a pertaining exceedance df W−0.3 = W−0.3, 1, 0.7 (dashed). 1

2

3

In Fig. 1.8, one recognizes that the truncated beta df has a left endpoint equal to the truncation point 1 and the same right endpoint 1/|γ| = 10/3 as the original beta df.

1.4. Modeling by Generalized Pareto Distributions

27

Limiting Distributions of Exceedances The parametric modeling of exceedance dfs F [u] by GP dfs is based on a limit theorem again. Recall that our intention is the modeling of exceedances dfs at high thresholds and, hence, one should consider thresholds tending to the right endpoint of the actual df F . (Balkema–de Haan–Pickands11 .) If F [u] (bu + au x) has a continuous12 limiting df as u goes to the right endpoint ω(F ) of F , then |F [u] (x) − Wγ,u,σu (x)| → 0,

u → ω(F ),

(1.46)

for some GP df with shape, location and scale parameters γ, u and σu > 0. Note that the exceedance df F [u] and the approximating GP df possess the same left endpoint u. If (1.46) holds, then F belongs to the pot–domain of attraction of the GP df Wγ . It is evident that this limit theorem can be formulated likewise in terms of GP dfs in the α–parameterization. It is evident that (1.46) is closely related to (1.28). One can easily prove that every EV df Gγ belongs to the pot–domain of attraction of Wγ . For this particular case, we also compute a rate of convergence. By employing a Taylor expansion of the exponential function around zero, one should ﬁrst verify that the relation

(1.47) Gγ (x) = W γ (x) 1 + O W γ (x) holds for the survivor functions Gγ and W γ . Then, deduce

[u] |G[u] γ (x) − Wγ (x)| = O W γ (u) .

(1.48)

Now, (1.46) follows from (1.45), whereby σu = 1+γu. Moreover, if one of the usual textbook dfs satisﬁes (1.46), then the convergence also holds for the pertaining densities, also see Section 6.5. Fig. 1.9 provides two illustrations in terms of densities: The ﬁrst example treats the standard Weibull and beta densities gγ and wγ with shape parameter γ = −.3. The second example concerns the standard Cauchy density f (x) = 1/(π(1 + x2 )) and a Pareto density with shape parameter α = 1. In Fig. 1.9, one can see that the GP (beta and Pareto) densities ﬁt to the upper tail of the Weibull and Cauchy densities. Elsewhere, the densities are substantially diﬀerent. The preceding Pareto density with µ = −.25 replaced by µ = 0 also ﬁts to the upper tail of the Cauchy density. 11 Balkema,

A.A. and de Haan, L. (1974). Residual life time at great age. Ann. Probab. 2, 792–804. Parallel work was done by J. Pickands (1975). Statistical inference using extreme value order statistics. Ann. Statist. 3, 119–131. example of a discrete limiting df is, e.g., the geometric df Hp (k) = 1 − (1 − p)k , k ≥ 1, mentioned on page 13. 12 An

28

1. Parametric Modeling

1 0.4

0.5 0.2

1

2

1

3

2

3

4

Fig. 1.9. (left.) Weibull density gγ (solid) and beta density wγ (dashed) with shape parameter γ = −.3. (right.) Standard Cauchy density (solid) and Pareto density w1,α,µ,σ (dashed) with α = 1, µ = −.25 and σ = 1/π.

Fitting a Generalized Pareto Distribution to the Upper Tail As suggested by the limiting relation (1.46), we assume that a GP df Wγ,u,σ can be ﬁtted to the exceedance df F [u] for certain parameters γ and σ (in short: F [u] ≈ Wγ,u,σ ). This implies that a certain GP df can be ﬁtted to the original df F . More precisely, if F (u) is known, we deduce from a relation F [u] ≈ Wγ,u,σ that F (x) ≈ Wγ,˜µ(x),˜σ ,

x ≥ u,

(1.49)

for certain parameters µ ˜ and σ ˜ . According to the deﬁnition (1.11) of exceedance dfs we have F (x)

= ≈

(1 − F (u))F [u] (x) + F (u) (1 − F (u))Wγ,µ,σ (x) + F (u)

=

Wγ,˜µ,˜σ (x),

x ≥ u,

where the latter equality holds for the parameters

˜ =u−σ ˜ Wγ−1 (F (u)). σ ˜ = σ/ 1 + γWγ−1 (F (u)) and µ

(1.50)

(1.51)

There is a unique relation between the two pairs of parameters µ, σ and µ ˜, σ ˜ determined by the equations [u]

Wγ,˜µ,˜σ = Wγ,u,σ

and Wγ,˜µ,˜σ (u) = F (u).

(1.52)

In terms of survivor functions, (1.50) can be written F (x) = F (u)F [u](x) ≈ F (u)Wγ,u,σ(x) = Wγ,˜µ,˜σ(x), x ≥ u. Related conclusions hold in the α–parametrization: if the Pareto df W1,α,µ,σ with left endpoint µ + σ = u ﬁts to the exceedance df F [u] , then the Pareto df

1.4. Modeling by Generalized Pareto Distributions

29

[u]

W1,α,˜µ,˜σ determined by W1,α,˜µ,˜σ = W1,α,µσ and W1,α,˜µ,˜σ (u) = F (u) ﬁts to the upper tail of the df F . We have µ ˜ = µ and σ ˜ = σ(1 − F (u))1/α . Note that the ﬁrst line in (1.50) can be extended to the representation F (x) = F (u)P (X ≤ x|X ≤ u) + (1 − F (u))P (X ≤ x|X > u),

x real,

(1.53)

where X is a random variable with df F . For a continuation of this topic we refer to page 58, where relations between GP and sample dfs are investigated.

Maxima of Generalized Pareto Random Variables n It is a simple exercise to deduce from (1.47) that W0n (x + log n) and Wi,α (an x)— with an as in (1.31)—are EV dfs G0 and Gi,α in the limit as n → ∞. The rate of convergence is O(n−1 ). There is another interesting non–asymptotic relationship between maxima of GP random variables and EV distributions. Generally, let X1 , X2 , X3 , . . . be non– negative iid random variables with common df F which has the left endpoint zero. Let N be a Poisson random variable with parameter λ > 0 which is independent of the Xi . Then, with F 0 (x) = 1 we have

P max Xi ≤ x i≤N

= =

∞

P max Xi ≤ x, N = n n=0 ∞

i≤N

P {N = n}F n (x)

n=0

=

exp(−λ(1 − F (x))

(1.54)

for x ≥ 0 and zero otherwise. Notice that there is a jump at zero. Plugging in a GP df one obtains a df that equals an EV df right of zero. If λ is suﬃciently large, then the jump is negligible and the df in (1.54) can be replaced by a GP df.

Moments of Generalized Pareto Distributions The jth moment mj,W of a Pareto and beta dfs W can be computed in a straightforward way. Recollect that mj,W = E(X j ) = xj dW (x) = xj w(x) dx,

where w = W is the density of W and X is a random variable distributed according to W . We have if α > j, mj,W1,α = α/(α − j), and mj,W2,α = (−1)j α/(α − j).

30

1. Parametric Modeling

The jth moment of a Pareto df W1,α is inﬁnite if α ≤ j. For the special case of j = 1, one obtains the mean values mW = m1,W of Pareto and beta dfs W . For i = 1, 2 we have (1.55) mWi,α = |α|/(α − 1), if 1/α < 1. If 1/α < 1/2, the variances are varWi,α = α/((α − 1)2 (α − 2)).

(1.56)

The mean values and variances of the GP dfs Wγ are mWγ = 1/(1 − γ), and

if γ < 1,

varWγ = 1/((1 − γ)2 (1 − 2γ)),

(1.57)

if γ < 1/2.

In the special case of γ = 0, one gets the well–known result that the mean value and variance of the standard exponential distribution are both equal to 1.

1.5

Heavy and Fat–Tailed Distributions

There are several diﬀerent concepts of fat or heavy–tailedness ∞ of a distribution. We say that a df F has a heavy upper tail if a jth moment 0 xj dF (x)—evaluated over the positive half–line—is equal to inﬁnity for some positive integer j. Therefore, all Pareto dfs are heavy–tailed. In addition, all the dfs in the pot–domain of attraction of a Pareto df are heavy–tailed. Likewise one may speak of a heavy lower tail. Fat–tailedness may be introduced by comparing the kurtosis to that of the normal distribution.

The Normal (Gaussian) Model Let Φ(x) =

x

−∞

ϕ(y) dy denote the standard normal df, and √ ϕ(y) = exp(−y 2 /2)/ 2π

the pertaining normal density. We introduce the mth convolution of a df F , which is given by F m∗ (x) = P {X1 + · · · + Xm ≤ x}, where X1 , . . . , Xm are iid random variables with common df F . A parametric modeling of convolutions by means of normal dfs is adequate, because under the conditions of the central limit theorem, we know that sup |F m∗ (x) − Φ ((x − µm )/σm )| → 0, x

m → ∞,

(1.58)

1.5. Heavy and Fat–Tailed Distributions

-2

31

1

0.4

0.5

0.2

2

-2

2

Fig. 1.10. (left.) Standard normal df Φ. (right.) Standard normal density ϕ.

where µm and σm > 0 are location and scale parameters. It is noteworthy that the normal df Φ is sum–stable because Φm∗ (m1/2 x) = Φ(x). The Cauchy df F is another sum–stable df with F m∗ (mx) = F (x). This topic will be further pursued in Section 6.4 within the framework of sum–stable distributions.

The Kurtosis and a Concept of a Fat–Tailedness The kurtosis of a df F is another moment ratio which is deﬁned by (x − mF )4 dF (x) var2F ,

(1.59)

where mF and varF are the mean and the variance of F . If the density has a high central peak and long tails, then the kurtosis is typically large. Notice that the kurtosis is independent of location and scale parameters. A df with kurtosis larger than 3, which is the kurtosis of normal dfs, is fat–tailed or leptokurtic. We also speak of fat upper and lower tails in this context. It is easily proven that the mixture of two Gaussian dfs—see (1.61) and Example 2.3.2—with equal location parameters and unequal scale parameters is leptokurtic.

Log–Normal Distributions The property of fat–tailedness is also discussed in conjunction with the log–normal distribution which has a short (ﬁnite) lower tail, yet one can speak of a fat upper tail. If one has a strong preference for the normal model, yet the positive data x1 , . . . , xn indicate a fat or heavy upper tail of the underlying distribution, then one may try to ﬁt a normal df Φµ,σ to the transformed data T (x1 ), . . . , T (xn ) of

32

1. Parametric Modeling

a reduced magnitude, cf. also page 37. The ﬁrst choice of such a transformation is T (x) = log x. If a normal df Φµ,σ can be ﬁtted to log(x1 ), . . . , log(xn ), then the log–normal df x > 0, (1.60) F(µ,σ) (x) = Φµ,σ (log(x)), can be ﬁtted to the original data x1 , . . . , xn . Conversely, exp–transformed normal data are log–normal which justiﬁes to say that the log–normal df has a fatter upper tail than the normal one. We have F(0,σ) (1 + σx) → Φ(x) as σ → 0. Therefore, instead of employing a log–transformation to the data, one may also try to ﬁt a log–normal df to the original data. The log–normal df is not heavy–tailed in our terminology, cf. page 30, because all moments are ﬁnite. Note that normal as well as log–normal dfs belong to the pot–domain of attraction of the exponential df , cf. [20] on pages 67–68. Notice that F(µ,σ) (x) = Φ0,σ (log(x/ exp(µ))) and, hence, exp(µ) is a scale parameter of the log–normal df. Log–normal distributions are skewed to the right. 1.5

1

0.5

Fig. 1.11. Plots of log–normal densities f(0,1) (solid) and f(0, .3) (dashed). 1

2

3

The preceding illustration concerns the standard log–normal density

1 exp − (log(x))2 /2σ 2 , f(0,σ) (x) = √ 2πσx

x > 0,

with the shape parameter σ.

Mixtures of Gaussian and Heavy–Tailed Distributions To enlarge a given model one may take mixtures F = (1 − d) F0 + d F1 ,

(1.61)

where F0 and F1 are taken from an initial parametric model and the mixing parameter d ranges between 0 and 1. An important example is a mixture of two normal distributions.

1.5. Heavy and Fat–Tailed Distributions

33

Actual dfs are mixtures, if data are generated according to random mechanism with dfs F0 and F1 with a probability 1 − d and, respectively, d. A more detailed interpretation of mixtures is given in Section 8.1 in conjunction with conditional distributions. Subsequently, we deal with mixtures (1 − d)Φ + d F , where F is another df that may be regarded as a contamination of the ideal normal model and 0 ≤ d ≤ 1. We consider two special cases of a densities f which may serve as a contamination of the normal density. • (Student Distributions.) For α > 0, we introduce densities −(1+α)/2 x2 fα (x) = c(α) 1 + α

(1.62)

where c(α) = Γ((1+α)/2)/(Γ(α/2)Γ(1/2)α1/2 ). For positive integers α this is the Student distribution with α degrees of freedom. The variance is α/(α−2) for α > 2. In (6.16), such distributions are introduced as mixtures of normal distributions. • (Generalized Cauchy Distributions.) The density of the standard generalized Cauchy df with shape parameter α > 0 is13

(1.63) fα (x) = c(α)/ 1 + |x|1+α , where c(α) = ((1 + α)/(2π)) sin(π/(1 + α)). In both cases one obtains the standard Cauchy density, cf. page 27, for α = 1. In addition, these densities are unimodal with mode equal to zero and possess heavy tails like the Pareto dfs with shape parameter α. The mixture density (1 − d)ϕ(x) + d fα (x), with d being close to zero, has the shape of a normal density in the center, yet possesses heavier tails. It is advisable to apply trimmed estimators of µ and σ to reach an estimate of the central normal part of the distribution. The following illustrations concern mixtures between the standard normal distribution and Cauchy and Weibull distributions. In Fig. 1.12 (left), one can clearly observe the heavier tails of the mixture, although the fraction of the Cauchy distribution is only ten percent. The center of the mixture can hardly be distinguished from a normal density.

Remarks About Robust Statistics The contamination of a normal distribution by a heavy–tailed distribution (such as the Cauchy distribution) is one of the favorite topics in robust statistics, because 13 Drees,

H. and Reiss, R.–D. (1992). Tail behavior in Wicksell’s corpuscle problem. In: Probability Theory and Applications, J. Galambos and I. K´ atai (eds.), 205–220, Kluwer, Dortrecht.

34

1. Parametric Modeling

0.4

0.4

0.2

0.2

1

2

3

1

2

3

Fig. 1.12. Normal density ϕ (solid) and mixture densities .9ϕ + .1f1 (left) and 0.9ϕ + 0.1g2, −1.6, 3, 1 (right) with Cauchy and Weibull components.

observations under the heavy tail—frequently regarded as outliers—destroy the performance of classical statistical procedures such as the sample mean. A primary aim of robust statistics may be formulated in the following manner (cf. [27]): “Describe the structure best ﬁtting to the bulk of the data: we tentatively assume a parametric model ... taking explicitly into account that the model may be distorted.” For this (central) bulk of the data the normal model is the dominating parametric model.

A Converse View Towards Robust Statistics In the preceding lines, a fat or heavy–tailed distribution was regarded as a contamination of the normal df. A converse view can be expressed in the following manner14 : “In many applications extreme data do not ﬁt to the ideology of normal samples and, therefore, extremes are omitted from the data set or one uses statistical procedures upon which extremes have a bounded inﬂuence. The converse attitude is to regard extremes as the important part of the data set, yet one must still follow certain principles of robust statistics and check the validity of the statistical model selection.” The decisive step was the ﬁtting of certain dfs—such as GP dfs—to extreme data. One must be aware that • the actual df deviates from any of the chosen parametric ones, and • there can be gross errors in the measurements which may heavily inﬂuence the performance of statistical procedures. 14

Reiss, R.–D. (1989). Robust statistics: A converse view. 23rd Semester on Robustness and Nonparametric Statistics. Stefan Banach Center, Warsaw, Abstracts of Lectures, Part II, 183–184.

1.6. Quantiles, Transformations and Simulations

35

The diﬃculties arising from the fact that the actual distribution deviates from any EV or GP distribution is the central topic in most research papers on extreme value theory. This question is brieﬂy touched upon in this book: • we already mentioned limit theorems for maxima and exceedance dfs (cf. Sections 1.3 and 1.4); • a von Mises condition will be introduced in Section 2.1 in conjunction with reciprocal hazard functions, and • the concept of a δ–neighborhood of a GP distribution and related weaker conditions are studied in Section 6.5. Less is known about robustifying statistical procedures in the extreme value setting against gross errors. The explanations in the Sections 3.1 and 5.1 about M–estimates should be regarded as a ﬁrst step.

1.6

Quantiles, Transformations and Simulations

The concept of q–quantiles and quantile functions (qfs) is introduced in greater generality and in a more rigorous manner compared to our remarks about quantiles on page 12. We also deal with technical questions that can be best described by means of quantile functions.

Quantiles In conjunction with the T –year level, we already introduced the q–quantile of a df F as the value z such that F (z) = q. Thus, the q–quantile z is a value along the measurement scale with the property that the fraction q of the distribution is left of z. In Fig. 1.13, this will be illustrated for the Gumbel df G0 (x) = exp(−e−x ), where z = − log(− log(q)). If the q–quantile is not unique, one may take the smallest z such that F (z) = q. For discrete dfs and, generally, for discontinuous dfs, it may happen that there is no value z such that F (z) = q. Then, the q–quantile is the smallest value x such that F (x) ≥ q. The 1/2–quantile is the median of the df F .

Quantile Functions If the df F is continuous and strictly increasing on its support (α(F ), ω(F )), then the quantile function (qf) F −1 is the usual inverse of F . Usually, the quantile function (qf) F −1 is a “generalized inverse” F −1 (q) := inf{x : F (x) ≥ q},

0 < q < 1.

(1.64)

36

1. Parametric Modeling 0.4

1

q

0.2

-2

z

2

-2

4

z

2

4

Fig. 1.13. (left.) The Gumbel df G0 evaluated at the q–quantile z. (right.) The area under the Gumbel density g0 (x) = e−x exp(−e−x ) left of the q–quantile z is equal to q.

Notice that F −1 (q) is the q–quantile of F as introduced in the preceding lines. If Fµ,σ is a df with location and scale parameters µ and σ, then −1 = µ + σF −1 , Fµ,σ

(1.65)

where F = F0,1 is the standard df.

4

2

0.5 -2

1

Fig. 1.14. Plot of the Gumbel qf G−1 0 (q) = − log(− log(q)).

We state the explicit form of EV and GP qfs in both parameterizations starting with EV qfs in their α–parameterization. Gumbel (EV0):

G−1 0 (q) = − log(− log(q));

Fr´echet (EV1), α > 0:

−1/α ; G−1 1,α (q) = (− log(q))

Weibull (EV2), α < 0:

−1/α . G−1 2,α (q) = −(− log(q))

Next, we present EV qfs in their γ–representation:

1.6. Quantiles, Transformations and Simulations

37

−γ − 1)/γ, G−1 γ (q) = ((− log(q))

EV, γ = 0:

and for γ = 0, we have the Gumbel qf G−1 0 again. We continue with GP qfs in the α–parameterization: Exponential (GP0):

W0−1 (q) = − log(1 − q);

Pareto (GP1), α > 0:

−1 (q) = (1 − q)−1/α ; W1,α

Beta (GP2), α < 0:

−1 W2,α (q) = −(1 − q)−1/α .

Finally, there is the γ–representation of GP dfs: GP, γ = 0:

Wγ−1 (q) = ((1 − q)−γ − 1)/γ,

and again W0−1 (q) = − log(1 − q). Recall that the medians of these distributions are obtained by plugging in the value q = 1/2. Verify, by means of (xy − 1)/y → log x,

y → 0,

(1.66)

that EV and GP qfs in the γ–parameterization again built a continuous family.

Transformations If a statistician is preoccupied with certain parametric dfs, say Fϑ , yet none of these dfs ﬁts to the data x1 , . . . , xn , one may deal with the transformed data T (x1 ), . . . , T (xn ). If Fϑ ﬁts to T (x1 ), . . . , T (xn ) for some parameter ϑ, then the df Fϑ (T ) ﬁts to the original data x1 , . . . , xn . For example, the transformation T (x) = log(x) reduces the magnitude of positive data. The df Fϑ (log(x)) is called the log–Fϑ df. We may say that the log–df has a fatter upper tail than the original df in view of the exp–transformation of the data. • (Exponential Model as Log–Gompertz Model.) If X is an exponential random variable with scale parameter σ, then log X is a Gompertz random variable with location parameter µ = log σ. • (Pareto Model as Log–Exponential Model.) If X is a Pareto random variable with shape and scale parameters α and σ, then log X is an exponential random variable with location and scale parameters log σ and 1/α. • (Fr´echet Model as Log–Gumbel Model.) A corresponding relationship holds between a Fr´echet random variable with shape and scale parameters α and σ and a Gumbel random variable with location and scale parameters log σ and 1/α.

38

1. Parametric Modeling • (Pareto and Beta Model.) If X is once again a Pareto random variable with shape and scale parameters α and σ, then −1/X is a beta random variable with shape and scale parameters −α and 1/σ. • (Fr´echet and Weibull Model.) A corresponding relationship holds between a Fr´echet random variable with shape and scale parameters α and σ and a Weibull random variable with shape and scale parameters −α and 1/σ.

Such transformations are suggested by the quantile and probability transformations: 1. Quantile Transformation: if U is a (0, 1)–uniformly distributed random variable, then F −1 (U ) has the df F , 2. Probability Transformation: conversely, if X is a random variable with continuous df F , then F (X) is (0, 1)–uniformly distributed. We mention further examples of transformed random variables: if X is a converse exponential random variable, then −1/α T (X) = G−1 2,α (G2,−1 (X)) = −(−X)

(1.67)

is a Weibull random variable with shape parameter α. Likewise, T (X) = −(−X)−1/α

(1.68)

is a beta random variable with shape parameter α if X is (−1, 0)–uniformly distributed.

Generation of Data According to our preceding remarks, one can easily generate data under EV and GP dfs: if u1 , . . . , un are governed by the uniform df on the interval (0, 1), the transformed values F −1 (u1 ), . . . , F −1 (un ) are governed by the df F . For example, the quantile transformation technique can be applied to a Cauchy random variable which possesses the qf F1−1 (q) = tan(π(q − 0.5)). If location and scale parameters µ and σ are included, then the transformation −1 can be carried out in two steps because Fµ,σ (ui ) = µ + σF −1 (ui ). We mention two other simulation techniques15 : • the normal qf is not feasible in an analytical form and the quantile transformation is not applicable. In this case, the polar method can be utilized, • the interpretation of mixture distributions within a two–step experiment stimulates a technique to carry out simulations, cf. page 33 and Section 8.1. 15

For details see, e.g., Devroye, L. (1986). Non–Uniform Random Variate Generation. Springer, New York.

Chapter 2

Diagnostic Tools In this chapter, we catch a glimpse of the real world in the condensed form of data. Our primary aim is to ﬁt extreme value (EV) and generalized Pareto (GP) distributions, which were introduced in the foregoing chapter by means of limit theorems, to the data. For that purpose, fairly simple nonparametric techniques for visualizing data are introduced. Those tools are especially selected which are of high relevance to extreme values. For example, sample excess and sample reciprocal hazard functions should be close to a straight line if a GP hypothesis is valid. Of course, Q–Q plots are also on the agenda. We discuss Q–Q plots for location and scale parameter families as well as for EV and GP models. Finally, certain tools are introduced which are relevant in conjunction with time series phenomena.

2.1

Visualization of Data

First, we describe visualization techniques such as the sample df, the sample qf, histograms and kernel densities. In contrast to Chapter 1, we do not assume that the data are maxima, exceedances or sums.

The Sample Distribution Function The sample df Fn (x) at x for a series of univariate data x1 , . . . , xn is the relative number of the xi that are smaller or equal to x. Thus, 1

I(xi ≤ x), Fn (x) := n

(2.1)

i≤n

where the indicator function is deﬁned by I(y ≤ x) = 1 if y ≤ x and 0, elsewhere; furthermore, the summation runs over i = 1, . . . , n. Sample dfs are particularly useful for representing samples of a smaller size.

40

2. Diagnostic Tools The data x1 , . . . , xn ordered from the smallest to the largest are denoted by x1:n ≤ · · · ≤ xn:n .

We have Fn (xi:n ) = i/n if xi:n is not a multiple point. Notice that Fn is constant between consecutive ordered values. The ordered values can be recaptured from the sample df and, thus, there is a one–to–one correspondence between the sample df and the ordered values. One may take a linear interpolation between consecutive points as well (also see pages 42 to 47 for other modiﬁcations). Occasionally, we write Fn (x; x) in place of Fn (x) to indicate the dependence on the vector of data x = (x1 , . . . , xn ). We will primarily deal with situations where each of the xi is generated under a common df F and the sample df Fn is approximately equal to F . This relationship will be brieﬂy written Fn (x) ≈ F (x).

(2.2)

In view of (2.2), we say that Fn (x) is an estimate of F (x).

1

0.5 Fig. 2.1. Gumbel df (dotted) and sample df of a Gumbel data set with 50 points.

-2

2

4

To a larger extent, our statistical arguments are based on the relationship (2.2) between the sample df Fn and the underlying df F so that, apparently, the statistical prerequisites for understanding this textbook are of an elementary nature.

The Sample Exceedance Distribution Function Let Fn (x; · ) be the sample df based on the data xi as in the preceding lines. Recall that the exceedances yi over the threshold u are those xi with xi > u taken in the original order of their outcome. The sample df Fk (y; · ) based on the vector

2.1. Visualization of Data

41

y = (y1 , . . . , yk ) of exceedances is the sample exceedance df. We have [u] . Fk (y; · ) = Fn (x; · )

(2.3)

Thus, the sample exceedance df is equal to the exceedance df of the sample df. From the fact that the sample df Fn (x; · ) is an estimate of the underlying df F , as pointed out in (2.2), one may conclude that Fk (y; · ) ≈ F [u] ,

x ≥ u;

(2.4)

that is, the sample exceedance df is an estimate of the exceedance df.

Sample Moments Now we introduce sample versions of the mean, variance and skewness coeﬃcient. These sample functionals can be deduced from the sample moments mj,n =

1 j xi . n

(2.5)

i≤n

Subsequently, assume that x1 , . . . , xn are governed by the df F . The representation mj,n = xj dFn (x) and (2.2) make it plausible that the jth sample moment mj,n is an estimate of the jth moment mj = xj dF (x) of F if this moment exists. We also write 1

xi x¯n = n i≤n

for the sample mean. The sample variance is s2n =

1

(xi − x ¯n )2 . n−1

(2.6)

i≤n

A factor 1/(n − 1) is employed instead of 1/n in the deﬁnition of s2n to obtain an unbiased estimator (cf. page 89) of the variance of F . Note that s2n = m2,n − m21,n if the factor 1/n is taken. We also write x ¯ and s2 instead of x ¯n and s2n . The sample skewness coeﬃcient can be written 1

n i≤n

xi − x ¯n sn

3

= (m3,n − 3m1,n m2,n + 2m31,n )/s3n .

(2.7)

The sample skewness coeﬃcient is also a natural estimate of the skewness coeﬃcient skewF of F .

42

2. Diagnostic Tools

Sample Quantiles, Sample Quantile Functions We believe that qfs and densities are more useful than dfs for the visual discrimination between distributions. In the subsequent lines we present the sample versions of qfs and densities. The sample qf Fn−1 may be introduced by i (2.8) := xi:n , Fn−1 n+1 where x1:n ≤ · · · ≤ xn:n are the data arranged in increasing order. In statistical publications, it is also suggested to employ plotting positions (i − 0.5)/n in place of i/(n + 1) in (2.8). In addition, let Fn−1 be constant between consecutive points i/(n + 1). Likewise, one may employ a linear interpolation. Note that the sample qf remains constant in case of multiple points. The sample qf Fn−1 is the qf—in the sense of (1.64)—of the sample df Fn if the sample qf is taken left–continuous. Also, Fn−1 (q) is the sample q–quantile. Usually, special constructions are employed for the sample median. Conclude from the basic relationship (2.2) for dfs that i i −1 −1 ≈F , (2.9) xi:n = Fn n+1 n+1 where F −1 is the qf pertaining to the df F , cf. (1.64). We also have x[nq]:n ≈ F −1 (q). In conjunction with grouped data and the kernel method, we will also present smoothed versions of the sample qf.

Linearly Interpolated Sample Distributions If the underlying df is continuous, then it is plausible to estimate this df by means of a continuous sample df. Such a df can be constructed by linearly interpolating the sample df Fn in (2.1) over bins (tj , tj+1 ], where the tj < tj+1 constitute a grid on the real line. One gets the continuous sample df Fn (x)

x − tj Fn (tj+1 ) − Fn (tj ) = Fn (tj ) + tj+1 − tj (x − tj )nj , for tj < x ≤ tj+1 , = Fn (tj ) + tj+1 − tj

(2.10)

where nj is the frequency of data x1 , . . . , xn in the bin (tj , tj+1 ]. Thus, the sample df Fn only depends on the data in a grouped form. Example 2.1.1. (Sample Distribution and Quantile Functions of Grouped Fire Claim Data.) The sample df and sample qf of grouped claim data are displayed. From the

2.1. Visualization of Data

43

original data set of UK ﬁre claim data, observed during a four year period, we just take the 387 claim sizes over £51,200 (these data are taken from [10] and stored in the ﬁle ig–ﬁre1.dat). Table 2.1. Number n(j) of claim sizes within class limits in £1000 51.2 72.41 102.4 250 500 750 1000 2000 3000

lower class limit

number of claims n(j) 108

88

117

47

12

4

8

3

0

The sample df and sample qf pertaining to the histogram are plotted in Fig. 2.2. 3000 claim size

1

2000 0.5

1000

1000

2000

0.5

3000

1

claim size

Fig. 2.2. Sample df (left) and sample qf (right) for ﬁre claim data over £51,200 . The ﬁrst overall impression is that the sample qf is a reﬂection of the sample df at the diagonal (as it should be because the sample qf is a generalized inverse of the sample df). It is evident that the sample df and qf provide the same information about the data although the viewpoints are diﬀerent.

The sample df based on grouped data is piecewise continuously diﬀerentiable and, therefore, it has a density in the form of a histogram. We will also deal with histograms for discrete data and with kernel densities for continuous data. The latter concept can be regarded as a modiﬁcation of histograms for grouped data.

Histograms for Grouped Data Again let nj be the frequency of data in the bin (tj , tj+1 ]. Taking the derivative of the preceding sample df Fn based on grouped data as given in (2.10), one gets the probability density fn (x) =

n(j) , n(tj+1 − tj )

tj < x ≤ tj+1 .

(2.11)

44

2. Diagnostic Tools

It is very natural to visualize frequencies by means of such a histogram. It is apparent that this histogram is an appropriate estimate of the density f of F . The histogram may also be addressed as sample density. Practitioners use histograms because of their simplicity in representing data, even if the data are given in a continuous form. One disadvantage of a histogram is that one must choose the location of the grid. Later we will introduce an alternative method for representing data, namely by means of a kernel density.

Histograms for Discrete Data In the case of integer–valued data, a sample histogram is given by pn (j) = n(j)/n, where n(j) is the number of data x1 , . . . , xn equal to the integer j. In analogy to (2.2), we have pn (j) ≈ P {j},

(2.12)

where P is the underlying discrete distribution (under which the xi were generated). Note that the discrete values xi —ordered according to their magnitudes— can be recaptured from the histogram. Histograms for binomial and Poisson distributions are given in Fig. 1.2, also see Fig. 3.2.

Kernel Densities Starting with continuous data x1 , . . . , xn , the histogram for grouped data may be constructed in the following manner. Replace each point xi in the bin (tj , tj+1 ] by the constant function g(x, xi ) =

1 n(tj+1 − tj )

,

tj < x ≤ tj+1 ,

(2.13)

with weight 1/n. In summing up the single termsg(x, xi ), one gets the histogram for grouped data in the representation fn (x) = i≤n g(x, xi ). If continuous data are given, then the choice of the grid is crucial for the performance of the histogram. We represent an alternative construction of a sample density. In contrast to (2.13), replace xi by the function x − xi 1 k , gb (x, xi ) = nb b where k is a function (kernel) such that k(y) dy = 1 and b > 0 is a chosen bandwidth. If k ≥ 0, then k((x− xi )/b)/b may be regarded as a probability density with location and scale parameters xi and b > 0. The function gb (·, xi ) again possesses the weight 1/n.

2.1. Visualization of Data

45

In summing up the single terms, one gets the kernel density

x − xi 1

k fn,b (x) := gb (x, xi ) = nb b

(2.14)

i≤n

i≤n

which is a probability density if k ≥ 0. In subsequent illustrations, the Epanechnikov kernel k(x) =

3 (1 − x2 )I(−1 ≤ x ≤ 1) 4

is taken which is the optimal kernel under a certain criterion. A kernel related directly to the terms g(x, xi ) in the histogram is the “naive” one k(x) = 0.5 × I(−1 ≤ x < 1). Other interesting choices of kernels are k(x) =

1 (9 − 15x2 )I(−1 ≤ x ≤ 1) 8

(2.15)

or

15 (3 − 10z 2 + 7z 4 )I(−1 ≤ x ≤ 1), (2.16) 32 because these kernels satisfy the additional condition x2 k(x) dx = 0. In analogy to the choice of the grid for the histogram—particularly of the bin–width—the choice of an appropriate bandwidth b is crucial for the performance of the kernel density. k(x) =

Fig. 2.3. Plots of normal density (solid) and kernel densities for the bandwidths b = 1.1 (dashed) and b = 0.3 (dotted) based on 50 Gaussian data.

0.2

-2

2

If the bandwidth b is small, which is related to a small scale parameter, then one can still recognize terms gb (x, xi ) representing the single data. If b is large, then an oversmoothing of the data may prevent the detection of certain clues in the data.

46

2. Diagnostic Tools

An Automatic Bandwidth Selection An automatic bandwidth selection is provided by cross–validation (see, e.g., the review article by Marron1 or [50]). For ﬁnite sample sizes, the automatic choice of the bandwidth must be regarded as a ﬁrst crude choice of the bandwidth. It is useful to vary the bandwidth around the automatically selected parameter; e.g., decrease the bandwidth until the graph of the kernel density becomes bumpy. Example 2.1.2. (TV Watching in Hours per Week.) We analyze 135 data of TV watching in hours per week stored in the ﬁle su–tvcon.dat. The bulk of the data is below 20 hours. The lower 100 observations range from 1.68 to 19.5. A list of the 35 data exceeding 20 hours is given. Table 2.2. Hours per week over 20. 20 20 20 20.5

20.5 22 22 22

23 23 23 23.9

24 24.75 25 25

26 26 27 27

27.5 27.5 28 28

28.5 29 29.5 30

31.5 33 37 40

45 49 63

These data are represented by a kernel density in Fig. 2.4. The automatic bandwidth selection by means of cross–validation leads to the choice b = 12.5.

0.04

0.02

Fig. 2.4. Two kernel densities for bandwidths b = 12.5 (solid) and b = 5 (dotted) for TV data. 40

80

hours per week

The cross–validation with the selected bandwidth b = 12.5 seems to oversmooth the data. The bandwidth b = 5 is small enough so that a more detailed structure becomes visible in the upper part of the distribution which might indicate a subpopulation. Yet, this bandwidth is suﬃciently large so that the kernel density does not become bumpy. 1 Marron,

J.S. (1988). Automatic smoothing parameter selection: A survey. Empirical Economics 13, 187–208.

2.1. Visualization of Data

47

It is likely that in the classical statistical analysis—from a methodological viewpoint one may specify this as the work done before R.A. Fisher2 —certain observations, such as the data point 63, are regarded as outliers and are omitted from the sample.

Kernel Distribution and Quantile Functions By taking the df pertaining to the kernel density fn,b , one obtains a competitor Fn,b of the sample df Fn . We have x − xi 1

K , (2.17) Fn,b (x) := n b i≤n

where

x

k(y) dy.

K(x) = −∞

By taking the qf pertaining to Fn,b , one obtains a competitor of the sample qf. Another version of the sample qf is constructed by directly smoothing the sample qf by a kernel k. Let q − y −1 1 1 −1 Fn (y) dy. k Fn,b (q) = b 0 b One must apply a variable bandwidth selection around the boundary points.

Kernel Densities With Bounded Support If it is known that none of the observations is below or, respectively, above a speciﬁc threshold—e.g., life spans are non–negative or exceedances over a certain threshold t exceed t—then the foregoing smoothing of data should not result in shifting weight below or above such thresholds (also compare the kernel densities in Fig. 2.4 and Fig. 2.10). One may reﬂect the sample at the minimum and/or maximum value and apply the preceding method or, alternatively, take bandwidths that vary with the location. If one realizes that there is a mode at a boundary point—as in the case of the exponential density at zero—then one should employ less smoothing around this point. 2 who

discussed the problem of outliers : “... the rejection of observations is too crude to be defended: and unless there are other reasons for rejection than the mere divergences from the majority, it would be more philosophical to accept these extremes, not as gross errors, but as indications that the distribution of errors is not normal” on page 322, respectively, page 289 in Fisher, R.A. (1922). On the mathematical foundation of theoretical statistics. Phil. Trans. Roy. Soc. A 222, 309–368, and Collected Papers of R.A. Fisher, Vol. I, J.H. Bennett, ed., pp. 274–335. University of Adelaide, 1971.

48

2. Diagnostic Tools 1

1

0.5 0.5

0.5

1

-1

1

2

3

4

Fig. 2.5. (left.) [0, 1]–uniform (solid), kernel (dashed) and bounded kernel density (dotted) for b = .2 based on 400 uniform data. (right.) Exponential (solid), kernel (dashed) and left bounded kernel density (dotted) for b = 1.1 based on 50 exponential data.

Critical Remarks About Sample Distribution Functions Visualizing data by the sample df yields a severe regularization of the data in so far that • there is a severe averaging, and • one gets a monotone function approaching one (zero) in the upper (lower) tail. This makes the sample df particularly applicable for small sample sizes. Yet for moderate and large sample sizes, the sample qf and, to some extent, sample densities such as the histogram and the kernel densities are more useful. This discussion will be continued in Section 2.4.

The Scatterplot Points (i, x(i)) or, generally, (t(i), x(i)) for 1 ≤ i ≤ n are plotted, thus resulting in a scatterplot. It is evident that such a scatterplot is also useful for plotting a function. The scatterplot is an indispensable tool for visualizing time series phenomena (see Section 2.5). Example 2.1.3. (Continuation of Example 1.2.1 about Annual Wind–Speed Maxima at Vancouver.) In Fig. 2.6 the annual wind–speed maximum is plotted against the year of occurrence. The scatterplot exhibits a certain decreasing tendency in the data which is captured by a least squares line, cf. Section 2.5, given by s(x) = 938.49 − 0.44x. Such a decrease in the annual wind–speed maxima may be due to changes in the climate or an urbanization near the gauging station.

2.2. Excess and Hazard Functions

49

km/h

80

60

Fig. 2.6. Annual wind–speed maxima measured in km/h plotted against years. 1950

1960

1970

1980

year

This part of the book only concerns univariate extremes. Whenever bivariate data are treated, then the ﬁrst component is regarded as a time–scale. In extreme value theory, it is customary to replace the time i by i/n in order to obtain an elegant formulation of asymptotic results. We are particularly interested in scatterplots of points where the second component x(i) exceeds a selected threshold u. Then, the values i/n locate the exceedance times, cf. page 13. For a continuation of this topic we refer to Sections 2.5 to 2.7.

2.2

Excess and Hazard Functions

Mean and median excess functions are important to extreme value analysis from a diagnostic viewpoint, because excess functions of GP dfs are straight lines. The pertaining sample versions provide further useful techniques for visualizing data. Another diagnostic tool, taken from survival analysis, is the hazard function. Yet, we are primarily interested in the reciprocal hazard function which is a straight line for GP dfs.

Excess Distribution Functions As introduced in Section 1.2, the excesses yi := yi − u over the threshold u are a variant of the exceedances yi . The excesses are the exceedances shifted to the left by the amount u. The pertaining excess df F (u) at u is F (x + u) − F (u) , x ≥ 0, (2.18) F (u) (x) = F [u] (x + u) = 1 − F (u) where F [u] is the exceedance df. Notice that the left endpoint of F (u) is equal to zero.

50

2. Diagnostic Tools

The excess df F (u) can be introduced as a conditional df: if X is a random variable with df F , then F (u) (x) = P (X − u ≤ x|X > u)

(2.19)

is the conditional df of X − u given X > u. The excess df F (u) is alternatively called residual life df at age u, where (u) F (x) is the probability that the remaining life time is smaller or equal to x given survival at age u. In this section, we are especially concerned with functional parameters of the excess df F (u) as a function in u. For example, the mean excess function describes the expected remaining life given survival at age u.

Mean Excess Functions The mean excess function eF of a df F (respectively, of a random variable X) is given by the conditional expectation of X − u given X > u. We have u < ω(F ). (2.20) eF (u) = E(X − u|X > u) = x dF (u) (x), It is evident that eF (u) is the mean of the excess df at u. The mean excess function eF is also called the mean residual life function, see, e.g., [28]. Note that eFµ,σ (u) = σeF ((u − µ)/σ) ,

(2.21)

where µ and σ are the location and scale parameters. In conjunction with the visualization of data, we are expressly interested in dfs, where the mean excess function is a straight line. It is well known that the GP dfs are the only dfs where this goal is achieved. We also deal with converse Weibull dfs 2,α (x) = 1 − exp(−x−α ), G

x > 0,

2,−1 = W0 is the expowith parameter α < 0 (introduced in (1.38)). Note that G nential df on the positive half–line. Here is a list of mean excess functions for GP and converse Weibull dfs. Exponential (GP0):

eW0 (u) = 1,

Pareto (GP1), α > 1:

eW1,α (u) = u/(α − 1),

u > 1,

−1 ≤ u ≤ 0, eW2,α (u) = u/(α − 1), ⎧ 0 ≤ γ < 1, ⎨ 0 < u, if for eWγ (u) = 1+γu 1−γ ⎩ 0 0,

2.2. Excess and Hazard Functions Converse Weibull, α < 0:

51

eG 2,α (u) = |α|−1 u1+α (1 + O(uα )).

We see that the mean excess function eWγ,µ,σ has the slope β1 = γ/(1 − γ) and the intercept β0 = (1 − γµ)/(1 − γ). Therefore, the slopes of the mean excess functions of GP dfs Wγ,µ,σ are increasing in γ.

4 γ = 0.5

3 2

γ=0

1

Fig. 2.7. Mean excess functions of GP dfs for parameters γ = −0.5, 0, 0.5.

γ = −0.5

0.5

1

1.5

If the excess df F (s) is close to a GP df W , then it is obvious from (2.20) that eF (u), u ≥ s, is close to the corresponding straight line determined by W . Mean excess functions do not exist for Pareto dfs with a shape parameter α ≤ 1. We also refer to (5.34), where Benktander II dfs are constructed with mean excess functions equal to |α|−1 u1+α . We now mention another representation of the mean excess function. First notice that E((X − u)I(X > u)) , u < ω(F ). eF (u) = P {X > u} Secondly, one gets E((X − u)I(X > u)) =

I(u < x)(x − u) dF (x)

∞

=

(1 − F (x)) dx,

(2.22)

u

where the second equation can be veriﬁed by writing x − u = I(u ≤ y)I(y < x) dy,

x ≥ u,

and by interchanging the order of integration (applying Fubini’s theorem). Therefore, the mean excess function can also be written as ∞ (1 − F (x)) dx , u < ω(F ). (2.23) eF (u) = u 1 − F (u)

52

2. Diagnostic Tools The expectations E(max{X − u, 0}) =

∞

(1 − F (x)) dx

(2.24)

u

are also called “tail probabilities”.

Sample Mean Excess Functions Let eF again be the mean excess function of the df F . By plugging in the sample df Fn based on x1 , . . . , xn , one obtains by i≤n (xi − u) I(xi > u) (2.25) , x1:n u) an estimate of eF . Note that en (u) is the sample mean of the excesses over the threshold u. Taking the mean or the median of the excesses over u entails a certain smoothing (regularization) of the data, yet one should be aware that excess functions are neither increasing or decreasing nor do they approach a constant at the upper end of the range. Sample mean excess functions will be one of our basic tools to verify the validity of a GP hypothesis in the upper tail of a distribution. The applicability of this approach is conﬁrmed by the relationship to the reciprocal hazard function, cf. (2.27), in conjunction with the von Mises condition (2.32).

Trimmed Mean Excess Functions Because the mean excess function does not exist for Pareto dfs with shape parameter α < 1 and due to the fact that en is an inaccurate estimate of eF if α > 1 is close to 1 (for a discussion see [16], page 150), a trimmed version eF,p (u) =

1 p

(F (u) )−1 (p)

x dF (u) (x)

−∞

is of interest, where 0 1. eW1,α ,p (u) = p 1−p Moreover, eW2,α ,p is strictly decreasing and eW0,1 ,p is a constant. A sample version is also obtained by plugging in the sample df. 3 Drees,

H. and Reiss, R.–D. (1996). Residual life functionals at great age. Commun. Statist.–Theory Meth. 25, 823–835.

2.2. Excess and Hazard Functions

53

Median Excess Functions The median excess function is deﬁned by the medians of excess dfs. We have mF (u) := (F (u) )−1 (1/2). The median excess function has properties corresponding to those of the trimmed mean excess function. For standard Pareto dfs W1,α , we have mW1,α (u) = (21/α − 1)u,

u > 1.

Once again, a sample version is obtained by plugging in the sample df. A formula corresponding to (2.21) also holds for trimmed mean and median excess functions.

Hazard Functions The hazard function hF of a df F with density f is hF (t) = f (t)/(1 − F (t)),

t < ω(F ).

Note that hF is the derivative of the cumulative hazard function HF (t) = − log(1 − F (t)),

t < ω(F ).

The value hF (t) is also called hazard rate or mortality rate at age t. It is the right–hand derivative taken at zero of the residual life df F (t) at age t. We have F (t) (x) ≈ hF (t)x for small x. Recall that F (t) (x) is the probability that the remaining life time is less than the instant x given survival at age t. Therefore, one gets the interpretation that the mortality rate is approximately equal to the probability that the remaining life is less than 1 given survival at age t. Check that hFµ,σ (t) = hF ((t − µ)/σ) /σ, where µ and σ denote the location and scale parameters. We include a list of the hazard functions of GP, converse Weibull and converse Gumbel dfs. Exponential (GP0):

hW0 (t) = 1,

Pareto (GP1), α > 1:

hW1,α (t) = α/t,

t > 1;

Beta (GP2), α < 0:

hW2,α (t) = α/t,

−1 ≤ t ≤ 0.

In the γ–representation, we have:

t > 0;

54

2. Diagnostic Tools

GP:

hWγ (t) =

⎧ ⎨ 0 < t,

1 1+γt

for

⎩

0 ≤ γ, if

0 < t < 1/|γ|,

Converse Weibull, α < 0:

hG 2,α (t) = |α|t−(1+α) ,

Converse Gumbel:

hG 0 (t) = et .

γ < 0; t > 0;

4 γ = −1 3 2 1

γ=0

γ=1

Fig. 2.8. Hazard functions of GP dfs for γ = −1, 0, 1.

1

2

2,α is a straight, increasing The hazard function of the converse Weibull df G 2,−2 is the Rayleigh df. Moreover, one can easily line if α = −2. Recall that G 0,µ,σ are the only ones that satisfy the check that the converse Gumbel dfs G famous Gompertz law postulating a mortality rate of the form4 h(x) = aebx . 0 is also called Gompertz df. Because Hence G t 1 − F (t) = exp − hF (x) dx ,

α(F ) < t < ω(F ),

(2.26)

α(F )

we see that the survivor function and, thus, also the df F can be regained from the hazard function. The hazard function and, therefore, the survivor function can be written in terms of the mean excess function. By multiplying both sides in (2.23) with 1 − F (u) and taking derivatives, one obtains hF (t) = 4 Gompertz,

1 + eF (t) , eF (t)

α(F ) < t < ω(F ).

(2.27)

B. (1825). On the nature of the function expressive of the law of human mortality etc. Phil. Trans. Roy. Soc. 115, 513–585.

2.2. Excess and Hazard Functions

55

Combining this with (2.26), we have t 1 + e (x) F dx , 1 − F (t) = exp − e (x) F α(F )

α(F ) < t < ω(F ).

(2.28)

Sample Hazard Functions The sample hazard function hn,b (t) =

fn,b (t)

1 − Fn,b (t)

,

t < xn:n ,

is an estimator of the hazard function hF , where fn,b is the kernel density in (2.14), and Fn,b is the kernel estimator of the df in (2.17). Note that Fn,b may be replaced by the sample df Fn . The quality of the sample hazard function as an estimate of the hazard function heavily depends on the choice of the bandwidth b. It can be advantageous to consider left or right–bounded versions of the sample hazard function as it was done for the kernel density itself. For grouped data, again with frequencies n(j) in cells [tj , tj+1 ), the sample hazard function is deﬁned by means of the histogram. Consequently, hn (t) =

n(j) , (tj+1 − tj ) i≥j n(i)

tj ≤ t < tj+1 .

Another version of the sample hazard function may be obtained by taking the derivative of a smoothed sample cumulative hazard function log(1 − Fn ).

Reciprocal Hazard Functions, a Von Mises Condition The reciprocal 1/hW of the hazard function of a GP df W is a straight line which is clearly of interest for visual investigations. Moreover, this observation leads to a condition (due to von Mises) that guarantees that a df belongs to the max and the pot–domain of an EV and GP distribution. Thus, the reciprocal hazard function is also of theoretical interest. Reciprocal hazard and mean excess functions are related to each other. We have (2.29) eWi,α = 1/((α − 1)αhWi,α ), if i = 1 and α > 1 or i = 2, and eWγ = 1/((1 − γ)hWγ ),

(2.30)

if γ < 1. Note that eW0 = hW0 = 1. The reciprocal hazard function was also mentioned due to technical reasons. Observe that the reciprocal hazard function of a GP df Wγ,µ,σ satisﬁes 1 − Wγ,µ,σ (t) 1 = = σ + γ(t − µ). hWγ,µ,σ (t) wγ,µ,σ (t)

56

2. Diagnostic Tools

Therefore, the ﬁrst derivative of the reciprocal hazard function is equal to γ. We have 1 − Wγ,µ,σ =γ (2.31) wγ,µ,σ on the support of Wγ,µ,σ . From (2.26) deduce that GP dfs are the only dfs which possess this property. If this condition is approximately satisﬁed for large t by some df F , then F belongs to the max and pot–domain of attraction of the EV and GP df with the given parameter γ. More precisely, the von Mises condition:

lim

x→ω(F )

1−F f

(x) = γ

(2.32)

is suﬃcient for the relations in (1.27) and (1.46), namely • Gγ is the limiting df of F n (bn + an x) as n → ∞, and • Wγ is the limiting df of F [t] (bt + at x) as t → ω(F ) for certain normalizing constants. Check, for example, that the normal df Φ satisﬁes condition (2.32) for γ = 0 and, hence, the Gumbel df is the limiting df of maxima of normal random variables. Under condition (2.32), one may take the following constants an and bn if the standard EV dfs in the α–parameterization are taken as limiting dfs. G0 :

bn = F −1 (1 − 1/n),

an = 1/(nf (bn ));

G1,α : G2,α :

bn = 0, bn = ω(F ),

an = F −1 (1 − 1/n), an = ω(F ) − F −1 (1 − 1/n).

(2.33)

For iid random variables X1 , . . . , Xn with common df F , the expected number of exceedances over F −1 (1 − 1/n) is equal to one. For GP dfs F = Wi,α , one obtains in (2.33) the standardizing constants under which the max–stability of the standard EV dfs Gi,α holds, cf. also (1.31).

2.3

Fitting Parametric Distributions to Data

In this section we visualize data by parametric dfs or densities. Thereby, one may also visually control the validity of a parametric model. This idea will be exempliﬁed for EV, GP and, in addition, for Poisson and normal distributions.

2.3. Fitting Parametric Distributions to Data

57

Fitting an Extreme Value Distribution to Maxima Let x = (x1 , . . . , xn ) be the vector of maxima xi of blocks of size m as in (1.5). Recall from (2.2) that the sample df Fn (x; · ) based on x is approximately equal to the underlying df F m if the number n of maxima is suﬃciently large. Combining (2.2) and (1.27) one gets Fn (x; · ) ≈ F m ≈ Gγ,µm ,σm , if n and m are suﬃciently large. Therefore, an EV df can be ﬁtted to the sample df based on maxima. It is likely that one of our basic assumptions is violated if none of the EV dfs ﬁts to the sample df. Correspondingly, ﬁt an EV density to the histogram or kernel density fn based on the xi . An eﬃcient, interactive software package is needed to carry out a visual selection of the parameters. Of course, the selection of the parameters is done in some subjective manner, yet one may follow certain principles. • If the selection is based on the sample df, one may choose the parametric df by minimizing the maximum deviation between the curves. • If the selection is based on a kernel density, then we suggest to single out a parametric density so that the area between both curves is minimized; this corresponds to minimizing the L1 –distance. • There is a strong dependence on the smoothing parameter in the latter case if the selection is based on the maximum deviation between the parametric and the sample curve.

Fitting a Generalized Pareto Distribution to Exceedances Let Fk (y; · ) be the sample exceedance df, cf. page 41, based on the exceedances y1 , . . . , yk over the threshold u. Combining (2.4) and (1.46) one gets Fk (y; · ) ≈ F [u] ≈ Wγ,u,σ ,

(2.34)

if k and u are suﬃciently large. Therefore, a GP df can be ﬁtted to the sample exceedance df. Once again, it is likely that one of our basic assumptions is violated if none of the GP dfs ﬁts to the sample exceedance df. If excesses yi = yi − u are taken in place of the exceedances yi , then a GP df with location parameter (left endpoint) equal to zero must be ﬁtted to the data. Likewise, one may ﬁt a Pareto df W1,α,µ,σ with left endpoint µ + σ = u to the sample exceedance df Fk (y; · ).

58

2. Diagnostic Tools

Fitting a Generalized Pareto Distribution to the Original Data In the preceding lines, a GP df was ﬁtted to the sample exceedance df. By changing the location and scale parameters a GP df can be ﬁtted to the upper tail of the original sample df and, therefore, to the original data. This is an application of (1.49) with F [u] and F replaced by the sample exceedance df Fk (y; · ) and and sample df Fn (x; · ). If (2.34) is valid, then (1.49) yields x ≥ u, (2.35) Wγ,˜µ,˜σ (x) ≈ Fn (x; x ), where

and

σ ˜ = σ(k/n)γ

(2.36)

µ ˜ = u − σ 1 − (k/n)γ /γ .

(2.37)

Notice that Fn (x; u) = 1 − k/n and k is the number of exceedances. There is a unique relation between the two pairs of parameters µ, σ and µ ˜, [u] σ ˜ determined by the equations Wγ,˜µ,˜σ = Wγ,u,σ and Wγ,˜µ,˜σ (u) = 1 − k/n. Fig. 2.9 illustrates the two diﬀerent approaches of ﬁtting a density to the exceedances and to the original data. The illustration on the right–hand side essentially shows a magniﬁcation of the curves on the left–hand side right of u.

Fig. 2.9. (left.) Fitting a GP density (solid) to the upper tail of a kernel density (dotted) based on the original xi . (right.) Fitting a GP density (solid) to a kernel density (dotted) based on exceedances yi over u.

Let W1,α,µ,σ be a Pareto df with µ + σ = u which is the left endpoint. If this Pareto df ﬁts to the sample exceedance df Fk (y; · ), then W1,α,˜µ,˜σ , determined [u] by W1,α,˜µ,˜σ = W1,α,µ,σ and W1,α,˜µ,˜σ (u) = 1 − k/n, ﬁts to the original sample df Fn (x; · ). Moreover, µ ˜ = µ and σ ˜ = σ(k/n)1/α .

2.3. Fitting Parametric Distributions to Data

59

Fitting a Poisson Distribution to Discrete Data Let x1 , . . . , xn be governed by a Poisson distribution Pλ . Remember from (2.12) that pn (j) = n(j)/n ≈ Pλ {j}, where n(j) is again the number of data being equal to j. Therefore, a Poisson hypothesis should be rejected if none of the Poisson histograms Pλ {j} visually ﬁts to the sample histogram pn (j).

Local Fitting of a Normal Distribution The preceding arguments can also be applied in the Gaussian case, if (1.27) is replaced by (1.58). Select location and scale parameters µ and σ so that Φµ,σ ≈ Fn (y; · ) in order to get a visualization of sums y1 , . . . , yn via a normal df. The procedure of ﬁtting a GP df to upper extremes may be regarded as a local statistical modeling. Such a local approach can be employed in the Gaussian setting as well. For example, ﬁt the main component of the normal mixture in the subsequent Fig. 2.10 to the central observations (visualized by a kernel density). To some extent, the local ﬁtting of parametric distributions to data corresponds to nonparametric density estimation, where the estimate of the density at a ﬁxed point x is just based on data around x.

Mixtures of Normal Distributions If a parametric model as dealt with above is untenable, then a modiﬁcation of this approach, such as dealing with a mixture, can be beneﬁcial. Example 2.3.1. (Mixture of Normal Distributions.) We continue the analysis of 135 data of TV watching in hours per week, cf. Example 2.1.2. From the form of the kernel density (Epanechnikov kernel and bandwidth b = 5) in Fig. 2.4, we already know that a normal density cannot be ﬁtted to the data. From Fig. 2.10, we see that a better ﬁt is obtained by a normal mixture. This modeling is still unsatisfactory in the upper tail of the distribution.

0.04

Fig. 2.10. Normal mixture (dotted) 0.875ϕ1 + 0.125ϕ2 , where ϕ1 (x) = ϕ((x − 12.4)/6.2)/6.2,

0.02

ϕ2 (x) = ϕ((x − 27)/3.4)/3.4, and a left–bounded kernel density. 20

40

hours per week

60

60

2. Diagnostic Tools

If the means of the two normal components are slightly closer together, then the heterogeneity of the data becomes less visible. Then, a representation of the data by means of a right–skewed distribution, such as the Gumbel distribution (cf. Fig. 1.3), would also be acceptable. Conversely, if a Gumbel modeling for certain data seems to be adequate, then a mixture distribution cannot be excluded. It depends on the posed question or the additional information about the data as to which type of modeling (in other words, hypothesis formulation) is preferable.

It is likely that mixtures of normal distributions having identical means are of higher interest. Recall from page 31 that such distributions are fat–tailed, that is, the kurtosis is lager than the kurtosis 3 of a normal distribution. Example 2.3.2. (Fitting a Mixture of Two Normal Distributions to Financial Data.) Parametric densities are ﬁtted to a kernel density—with bandwidth b = 0.002—based on the centered ﬁnancial data which are displayed in Fig. 1.1. A normal mixture—a maximum likelihood estimate—with mixing parameter d = 0.362 and scale parameters σ1 = 0.00285 and σ2 = 0.00898 is hardly distinguishable from the kernel density (both represented by a solid line).

100

50

-0.02

-0.01

Fig. 2.11. Fitting normal (dotted, dashed) and a mixture of two normal densities (solid) to ﬁnancial data.

0.01

0.02

Two normal densities with σ = 0.0039 (dotted) and σ = 0.0065 (dashed) are included. The ﬁrst one ﬁts well to the kernel density in the center, yet there is a signiﬁcant deviation in the tails. The second one—determined by the sample standard deviation— strongly deviates from the kernel density in the center.

In Chapter 16, page 379, we also a apply maximum likelihood estimators in statistical models of Student and sum–stable distributions, cf. Sections 6.3 and 6.4, to these data.

2.4. Q–Q and P–P Plots

61

The Art of Statistical Modeling One major goal of this book is to select distributions which simultaneously ﬁt to the central as well as to the extreme data. The appropriate insight can be gained by using the available tools such as Q–Q plots (subsequent Section 2.4) and sample mean excess functions (Section 2.2). A parametric modeling can be useful in reducing the variance of an estimation procedure. If the parametric model is incorrect, then one must take a bias into account. An optimal choice of the parametric model is achieved if there is a certain balance between the variance and the bias. In Section 6.6 much eﬀort is invested to reduce the bias of estimators within the extreme value setting by introducing higher order conditions. We believe that visual procedures are preferable to automatic ones in many situations. In that context, we also cite an interesting argument (translated from German) in Pruscha5 , page 62: “For larger sample sizes n, visual diagnostic tools can be preferable to goodness–of–ﬁt tests. A parametric hypothesis will be rejected for larger n, even if the deviation of this hypothesis is negligible (from a practical viewpoint) due to the high power of test procedures.”

2.4

Q–Q and P–P Plots

Q–Q plots are usually deﬁned for location and scale parameter families and, therefore, we ﬁrst review the main ideas for such models. An extension to EV and GP models is obtained by employing estimators of the shape parameter.

Q–Q Plots in Location and Scale Parameter Families Assume that the data x1 , . . . , xn are governed by a df Fµ,σ (x) = F ((x − µ)/σ) with location and scale parameters µ and σ > 0. Thus, F = F0,1 is the standard version. Values Fn−1 (q) of the sample qf will be plotted against F −1 (q). More precisely, one plots the points

−1 i = 1, . . . , n, F (qi ), Fn−1 (qi ) , where qi = i/(n+1). Notice that location and scale parameters need not be selected in advance when a Q–Q plot is applied to the data. Because Fn−1 (qi ) = xi:n , the relationship (2.9) between the sample qf and the underlying qf yields −1 Fn−1 (qi ) ≈ Fµ,σ (qi ) = µ + σF −1 (qi ), 5

(2.38)

Pruscha, H. (1989). Angewandte Methoden der Mathematischen Statistik. Teubner, Stuttgart.

62

2. Diagnostic Tools

and, hence, the Q–Q plot of points −1

F (qi ), xi:n ,

i = 1, . . . , n,

(2.39)

is close to the graph (x, µ + σx). The Q–Q plot can be visualized by a scatterplot, whereby a linear interpolation may be added. Apparently, the intercept and the slope of the Q–Q plot provide estimates of µ and σ. Another frequently taken choice of qi is (i − 0.5)/n. The selected location/scale parameter family is untenable if the deviation of the Q–Q plot from a straight line is too strong. Example 2.4.1. (Continuation of Example 2.1.2 about TV Data.) A greater problem in Example 2.1.2 was the selection of an appropriate bandwidth parameter. In conjunction with Q–Q plots, one must not choose a bandwidth, but a parametric model. Subsequently, we selected the normal location and scale parameter family. A straight line will be ﬁtted to that part of the Q–Q plot which represents the bulk of the data.

40 hours

20

Fig. 2.12. Normal Q–Q plot based on 135 TV data and a straight line visually ﬁtted to the Q–Q plot. -3

-2

-1

1

2

3

The normal Q–Q plot is suﬃciently close to a straight line below the quantity of 18 hours, yet there is a stronger deviation above this threshold.

Of course, one may also check whether the data were generated under a speciﬁc df F . This is just the case when the actual df is the standard df in the preceding considerations. Then, the Q–Q plot must be close to the main diagonal in the plane. The disadvantage of Q–Q plots is that the shape of the selected parametric distribution is no longer visible.

Q–Q Plots in Extreme Value and Generalized Pareto Models In EV and GP models, one must keep in mind that there is an additional parameter, namely the shape parameter, besides the location and scale parameters. We suggest applying a Q–Q plot with the unknown shape parameter having been

2.4. Q–Q and P–P Plots

63

replaced by an estimate. If there is a stronger deviation of the Q–Q plot from a straight line, then either the estimate of the shape parameter is inaccurate or the model selection is untenable.

P–P Plots We introduce the P–P plot in conjunction with a location and scale parameter family of dfs Fµ,σ . The P–P plot is given by

qi , F (xi:n − µn )/σn ,

i = 1, . . . , n,

where µn and σn are estimates of the location and scale parameters (such estimates will be presented in the next section). Because

F (xi:n − µn )/σn = Fµn ,σn F −1 (qi ) , n

a strong deviation of the P–P plot from the main diagonal in the unit square indicates that the given model is incorrect (or the estimates of the location and scale parameters are inaccurate). The values of the P–P plot will be close to one (or zero) and, thus, close to the diagonal in the upper (or lower) tail, even if the choice of the model is wrong.

Further Remarks About Regularization and Smoothing Let us continue our permanent discussion about the usefulness of sample dfs, qfs, densities, etc. for the visualization of data. A remark made about regularization in Section 2.1 is also relevant to Q–Q and P–P plots. By applying the sample qf, sample excess functions, the sample hazard function or the Q–Q plot, one is able to extract the information inherent in the data in a suitably way by achieving a compromise between the following two requirements: • the random ﬂuctuation of the data must be reduced, and • special features and clues contained in the data must be exhibited. We believe that this goal is not achieved in the same manner by dfs and related tools such as the P–P plot because there is an oversmoothing particularly in the upper and lower tails of the distribution. Exaggerating a bit, one may say that one should apply the sample df Fn (or, likewise, the survivor function 1 − Fn ) and the P–P plot if one wants to justify a hypothesis visually. The other tools are preferable whenever a critical attitude towards the modeling is adopted.

64

2.5

2. Diagnostic Tools

Trends, Seasonality and Autocorrelation

This section concerns several aspects of exploratory time series analysis. Many observations recorded at speciﬁed times exhibit a dependence on time. This dependence may be caused, for example, by a certain tendency in the climate, an increasing population, inﬂation, or seasonal eﬀects. We collect and discuss some statistical procedures known from regression and time series analysis for measuring and removing a trend or a seasonal component in a series of data. The autocorrelation function is also on the agenda. After having removed a trend or a seasonal component from the data, one obtains residuals which may be dealt with by the tools provided in foregoing sections.

The Linear Least Squares Method A trend is a long–term change of a series of data. First let a linear tendency be visible, cf. Example 2.1.3, that will be captured and removed by a least squares line. Thus, a straight line is ﬁtted to the points (t1 , y1 ), . . . , (tn , yn ) in a scatterplot by applying the least squares method. The ti need not be integer–valued or equidistant. The least squares line s(t; β0 , β1 ) = β0 + β1 t with regression slope β1 and intercept β0 is chosen such that the cumulated squared distances

(yi − β0 − β1 ti )2 (2.40) i≤n

between the values yi and s(ti ; β0 , β1 ) at ti are minimal. The well–known solutions are the estimates ¯)(ti − t¯) i≤n (yi − y β1,n = ¯2 i≤n (ti − t) of the regression slope, and β0,n = y¯ − β1,n t¯ of the intercept, where y¯ and t¯ are again the averages of the yi and ti . One gets a decomposition yi = s(ti ; β0,n , β1,n ) + xi

(2.41)

where s(ti ; β0,n , β1,n ) = β0,n + β1,n ti represents a linear part in the data and the xi are the residuals which ﬂuctuate irregularly around zero.

2.5. Trends, Seasonality and Autocorrelation

65

Nonlinear (Polynomial) Least Squares Methods If one recognizes a nonlinear trend in the scatterplot of points (ti , yi ), one may employ parametric trend functions s(t; β0 , . . . , βp ), where the parameters β0 , . . . , βp are selected such that

2 yi − s(ti ; β0 , . . . , βp ) (2.42) i≤n

is minimal. There is a greater variety of parametric trend functions. For example, the linear approach can be extended to polynomials

s(t; β0 , . . . , βp ) = β0 + βj t j j≤p

of degree p. For p = 0 one gets the sample mean which determines a straight line. Explicit solutions β0,n , . . . , βp,n to the least squares minimization for polynomials can be obtained within the bounds of multiple, linear regression.

Parametric Regression for a Fixed Design We reformulate the preceding considerations within a stochastic framework. Let Yi = s(ti ; β0 , . . . , βp ) + εi , where the random variable Yi is observable at time (at the position) ti , and εi is a random residual with expectation Eεi = 0. Thus, Yi is a random variable with expectation EYi = s(ti ; β0 , . . . , βp ). Notice that the yi and xi in (2.41) may be regarded as realizations of Yi and εi . The least squares solutions βj,n —within the polynomial framework—provide unbiased estimators of the unknown parameters βj and, therefore, mn (i) = s(ti ; β0,n , . . . , βp,n )

(2.43)

is an unbiased estimator of the expectation E(Yi ). It suggests itself also to employ certain averages to estimate such expectations. Below, we deal with moving averages of the Yj pertaining to adjacent points tj of ti . These moving averages provide nonparametric estimates of a parametric or nonparametric trend function. Parametric regression for a random design will be studied in Section 8.1.

Moving Averages, Nonparametric Estimation of a Trend To eliminate—or, at least, to reduce—the irregular ﬂuctuation of measurements yi in a nonparametric manner one may average those yj pertaining to adjacent points tj of ti . These averages capture a trend in the yi .

66

2. Diagnostic Tools For example, take the Nadaraya–Watson moving average 1

I(ti − b ≤ tj ≤ ti + b)yj mn (i) = Kn

(2.44)

j≤n

at the position ti , where Kn =

I(ti − b ≤ tj ≤ ti + b)

j≤n

is the number of points tj in the interval of length 2b around ti . The value b > 0 is called a bandwidth. Generally, averages can be expressed by

tj − ti tj − ti k yj (2.45) mn (i) = k b b j≤n

j≤n

at the positions ti , where k is a kernel such that k(t) dt = 1 and b > 0 is a bandwidth (cf. also page 44, where, e.g., the Epanechnikov kernel is introduced). Usually, k is taken symmetrical around zero. In (2.44) there is the uniform kernel k(t) = 0.5 × I(−1 ≤ t ≤ 1). Again one gets a decomposition yi = mn (i) + xi , where the xi are the residuals which ﬂuctuate irregularly around zero. Special kernels (e.g., truncated versions) must be taken at corner points. We suggest to employ truncated versions of the given kernel. Subsequently, we assume that the positions ti are arranged in increasing order and, in addition, the ti are equidistant, with ti = i or ti = i/n as special cases. Then, (2.45) can be written

mn (i) = aj yi+j , (2.46) j

for certain weights aj satisfying aj = a−j and j aj = 1. In the case of the uniform kernel k(t) = 0.5 × I(−1 ≤ t ≤ 1), one obtains the moving average

1 yi+j . (2.47) mn (i) = 2v + 1 |j|≤v

A slightly modiﬁed version is 1 mn (i) = 2v

1 1 yi−v + yi+j + yi+v . 2 2 |j|≤v−1

There is a trade–oﬀ between the two requirements that

(2.48)

2.5. Trends, Seasonality and Autocorrelation

67

• the irregular ﬂuctuation should be reduced, • the long term variation in the data such as a quadratic or cubic tendency should not be distorted by oversmoothing the data. A balance between these two requirements can be gained by an appropriate choice of the bandwidth b or of the numbers v in (2.47) and (2.48). In addition, it can be useful to employ kernels as in (2.15) or (2.16) with k(t)t2 dt = 0 in order to preserve a quadratic or cubic tendency in the data. This corresponds to the condition j aj j 2 = 0 for the weights aj in (2.47), if x(i) − x(i − 1) = 1. An example is provided by Spencer’s 15 point moving average, where the weights are (a0 , a1 , . . . , a7 ) = (74, 67, 46, 21, 3, −5, −6, −3)/320. In Fig. 2.13 (right), Spencer’s moving average is applied to 200 iid standard normal data.

2

2

200

200

-2

-2

Fig. 2.13. (left.) Scatterplot of 200 standard normal data. (right.) Spencer’s 15 point moving average of these data.

The strong ﬂuctuation in the normal data cannot be smoothed appropriately by Spencer’s moving average. Apparently, the choice of the number of points is more important than the selection of the kernel. Example 2.5.1. (Maximum Daily Temperature at Death Valley.) We consider the maximum daily temperatures at Furnace Creek, Death Valley National Park, from Aug. 1994 to Aug. 1995, by which the measurements for Dec. 1994 were not available. For the missing data, we ﬁlled in values deduced from a quadratic least squares procedure applied to points around the gap. In Fig. 2.14 (left), the maximum daily temperature is plotted against the day of the measurement.

68

2. Diagnostic Tools

125

temperature

temperature

125

100

75

100

75

50

50 0

100

200

300

400

time (days)

0

100

200

300

400

time (days)

Fig. 2.14. (left.) Scatterplot of maximum daily temperature measured in Fahrenheit. (right.) Moving average (41 points) employing the Epanechnikov kernel.

Relative to the given time span of 13 months, we observe a long term variation (a trend) in the data that can be removed by means of a moving average. This data set is stored in the ﬁle et–deval.dat.

Given a time span of several years, the variation in the preceding temperature data must be interpreted as a seasonal eﬀect (dealt with below). Thus, the time horizon greatly inﬂuences the methodology of handling a series of data. Our general references for this section are the mathematically oriented book [5] and [26] for economic time series, yet the application of kernels and the question of an appropriate choice of the number of points are not dealt with in these books.

Modiﬁcations of Moving Averages In certain applications, it is desirable to employ modiﬁed versions of the averages as introduced in the preceding lines. Other characteristics of the sample, such as medians and quantiles, are also also of interest. We give some details. • (One–Sided Moving Averages.) This is the construction employed for the ordinary moving average at the upper corner point. • (Moving Averages With a Random Bandwidth Chosen by Nearest Neighbors.) If there is not a grid of equidistant points, as, e.g., a full grid of integers, then it can be advisable to employ a nearest neighbor method. A random bandwidth b is determined in the following manner. Given a nonnegative integer r, let b be the minimum of the distances between the ﬁxed point ti , where the moving average is evaluated, and its rth upper and, respectively, rth lower neighbor tj . Near to the upper or lower corner point, one merely evaluates the distance to the rth lower or, respectively, the rth upper neighbor. Thus, one is averaging over r + 1 to 2r + 1 values yj .

2.5. Trends, Seasonality and Autocorrelation

69

• (Local Weighted Regression.) As before choose neighboring tj of a ﬁxed value ti and carry out a weighted local least squares (lowess) procedure based on these neighbors, cf. the book [8] by Cleveland. • (Moving Medians.)

Alternatively, one may use moving medians of the form ti , med|j|≤k yi+j to reduce the ﬂuctuation of a time series. This can be necessary when the observations come from a heavy–tailed distribution. • (Moving Quantiles.) Later we will be particularly interested in moving higher q–quantiles in conjunction with series of log–returns of ﬁnancial data (cf. Fig. 1.1 and Chapter 16). In the latter context, we also use the parametric approach for estimating a higher quantile.

The Seasonal Component If the moving average exhibits a variation that is annual in period—in other words, seasonal—then a reﬁned decomposition of the measurements yi is suggested. For simplicity, let ti = i for i = 1, . . . , n, where n = lp and l, p are the number and length of periods. Now we also single out a periodic component sn , i = 1, . . . , p, satisfying sn (i + jp) = sn (i), and

i≤p sn (i)

j = 0, . . . , l − 1; i = 1, . . . , p,

(2.49)

= 0. Thus, we have a decomposition in mind yi = mn (i) + sn (i) + xi ,

(2.50)

where the mn (i) represent the smooth trend components and the xi are the residuals. This is done in three steps. • (Preliminary Determination of a Trend Component.) By applying moving averages as introduced in (2.47) or (2.48) with p = 2v + 1 or p = 2v, one gets a preliminary trend component m n (i) that is not aﬀected by any periodic component. n (i), single • (Determination of a Period (Cycle).) From the residuals yi − m out a periodic component determined by s˜n (i) =

l−1

1 yi+jp − m n (i + jp) , l j=0

or sn (i) = s˜n (i) −

1

s˜n (j), p j≤p

i = 1, . . . , p,

i = 1, . . . , p,

70

2. Diagnostic Tools whereby the second version is preferable because it satisﬁes the additional requirement i≤p sn (i) = 0. If the number of periods is small, yet one can postulate a smooth periodic component, then it is plausible to apply the preceding operations to a slightly n (i). smoothed version of the yi − m • (Final Determination of the Trend Component.) Finally, compute a moving average or a parametric trend function mn (i) based on the deseasonalized data yi − sn (i). One gets the residuals xi = yi − sn (i) − mn (i)

(2.51)

by combining these steps, If the detrended and deseasonalized data x1 , . . . , xn are realizations of random variables X1 , . . . , Xn with expectation EXi = 0, and X1 , . . . , Xn are uncorrelated or independent, then standard statistical procedures become applicable. Example 2.5.2. (Water Levels of the Moselle River.) We examine the water levels (in meters) of the Moselle River measured in Zeltingen from Nov. 1964 to Dec. 1977 and from Jan. 1981 to Jan. 1996 (stored in the ﬁle ht–mosel.dat). The measurements from the years 1978–1980 are missing. Since 1988, the measurements are daily maxima. Before 1988, there was one measurement each day.

Fig. 2.15. Scatterplot of the Moselle River levels from Nov. 1964 to Jan. 1996, with a gap of the years 1978–1980 due to missing data. Of course, the missing data from the years 1978 to 1980 caused an additional problem. To simplify the matter, this gap was ﬁlled by corresponding neighboring measurements. The gap from Jan. 1978 to June 1979 was ﬁlled with the values from Jan. 1976 to June 1977, and, likewise, the gap from July 1979 to Dec. 1980 was ﬁlled with the values from July 1981 to Dec. 1982 (this completed data set is stored in the ﬁle ht–moﬁl.dat).

2.5. Trends, Seasonality and Autocorrelation

71

In Fig. 2.16, we see the estimated seasonal component with and without smoothing. The smoothing reduces the irregular ﬂuctuation to some extent.

1

1

100

300

500

100

-1

300

500

-1 time (days)

time (days)

Fig. 2.16. (left.) Seasonal component without smoothing. (right.) Seasonal component with an additional 25 points smoothing. The seasonal component attains its maximum values within the period from the end of December to mid–February. There is another remarkable peak in April.

The Moselle River data will be analyzed more intensively in Chapter 14. One must cope with the facts that these data are serial correlated and seasonally varying in the variance (heterosketastic) and in higher moments.

Serial Analysis of Stationary Data: the Autocovariance Function For random variables X, Y with EX 2 , EY 2 < ∞ the covariance is

Cov(X, Y ) = E (X − EX)(Y − EY ) .

(2.52)

Loosely speaking, there is a tendency that the random variables X and Y simultaneously exceed or fall below their expectations EX and EY , if there is a positive covariance. The random variables X and Y are uncorrelated if Cov(X, Y ) = 0. Recall that independent random variables are uncorrelated, yet the converse conclusion is not valid. The pertaining sample covariance is sx,y,n =

1

(xi − x¯)(yi − y¯), n−1

(2.53)

i≤n

where x ¯ and y¯ are the sample means of the data x1 , . . . , xn and y1 , . . . , yn . Subsequently, we study the serial dependence structure of a detrended and deseasonalized time series by means of the autocovariance function. A sequence

72

2. Diagnostic Tools

X1 , . . . , Xn is stationary if EXi = EX1 , EXi2 < ∞ and the covariances Cov(Xi , Xi+h ) = Cov(X1 , X1+h ) =: r(h),

i + h ≤ n,

(2.54)

merely depend on the time lag h. One also speaks of a weakly or covariance stationary series. The function r, with the time lag h as a variable, is the autocovariance function. It is particularly assumed that the expectations and variances are constant. The autocovariance function r(h) can be estimated by the sample version rˆn (h) =

1

(xi − x ¯)(xi+h − x ¯), n

(2.55)

i≤n−h

where x ¯ = i≤n xi /n is the sample mean. The estimation is accurate if n − h is suﬃciently large. Notice that rˆn (0) is the sample variance with the factor 1/(n− 1) replaced by 1/n to reduce the random ﬂuctuation for larger lags h. The ratio ρ(h) = r(h)/r(0) (2.56) is the autocorrelation function. The sample autocorrelation function ρ is rn (0). ρn (h) = rˆn (h)/ˆ

(2.57)

In Fig. 2.17, the sample autocorrelations are represented by bars. 1

Fig. 2.17. Sample autocorrelations of 200 iid standard exponential data for lags h = 0, . . . , 40.

0.0 30

10 time lag

Notice that ρn (0) = ρ(0) = 1 and the autocorrelation function attains values between −1 and 1 under the stationarity condition. In the case of detrended and deseasonalized data, we may assume that the expectation is equal to zero. An estimate of the autocovariance function r is rˆn (h) =

1

xi xi+h . n i≤n−h

2.5. Trends, Seasonality and Autocorrelation

73

If rˆn (h) is suﬃciently close to zero for h ≥ q, it is legitimate to assume that the residuals x1 , x1+q , x1+2q , . . . are realizations of uncorrelated or independent random variables. Then, standard statistical procedures for uncorrelated or independent random variables become applicable to the subsequence. In conjunction with a non–trivial autocorrelation function, one speaks of a time series. As a theoretical example of such a series, we mention a Gaussian AR(1) time series {Xi }. Example 2.5.3. (Gaussian AR(1) Series.) For 0 ≤ d ≤ 1, let X1

=

Y1 ,

Xk

=

d Xk−1 + (1 − d2 )1/2 Yk ,

k > 1,

(2.58)

where the Yi are iid standard Gaussian random variables (normal random variables are often called Gaussian in the time series context). This is the usual construction when deﬁning standard Gaussian random variables X1 and X2 with correlation d. Verify that {Xk } is a stationary sequence of standard Gaussian random variables with autocorrelation function ρ(h) = E(X1 X1+h ) = dh ,

h ≥ 0.

Thus, we have a geometrically decreasing autocorrelation function. Notice that independence holds for d = 0 and total dependence for d = 1.

1

Fig. 2.18. Theoretical autocorrelations of Gaussian AR(1) series with d = 0.8 (solid line) and sample autocorrelations of 200 Gaussian AR(1) data under the parameter d = 0.8 (bars) for time lags h = 0, . . . , 15.

0 0

5

10

15

time lag

Next we want to illustrate the sample behavior of AR(1) series for uncorrelated (independent) and strongly correlated random variables. In Fig. 2.19, Gaussian AR(1) data series of size 200 are plotted which were generated under the correlation parameters d = 0 and d = 0.95. The data randomly ﬂuctuate around the x–axis on the left–hand side, yet seem to exhibit a certain trend on the right–hand side although there is a stationary series.

The discussion about AR(1) series and related time series will be continued in the Sections 6.2, 16.7 and 16.8.

74

2. Diagnostic Tools

4 2

3 2

1

1 100

200

100

-1

-1

-2

-2

200

Fig. 2.19. Gaussian AR(1) data generated under d = 0 (left) and d = 0.95 (right).

2.6

The Tail Dependence Parameter

The following remarks should be regarded as a preliminary technical introduction to the concept of tail dependence and tail independence which concerns a certain property of the bivariate survivor function in the upper tail. Later on, namely in Section 12.1, tail independence is interpreted as the property of the upper tail of a bivariate distribution which entails that the componentwise taken maxima are asymptotically independent. In Section 13.3 there is also a detailed discussion of other tail independence parameters which measure the rate at which the tail independence is attained. At the beginning we introduce a certain tail dependence parameter by means of the bivariate survivor function. The deﬁnition of a auto–tail–dependence function ist added which is related to the autocovariance function. In addition, certain sample versions of the tail dependence parameter and of the auto–tail–dependence function are suggested.

An Introduction to Tail Dependence Let X and Y be random variables with the joint df F and univariate marginal dfs FX and FY . The dependence in the upper tail region of the distribution may be expressed by the conditional probability P (Y > y|X > x) =

P {X > x, Y > y} P {X > x}

(2.59)

of Y > y given X > x. Such conditional probabilities were studied by Sibuya6 and other authors in conjunction with the asymptotic independence of componentwise taken maxima, see (12.8). 6 Sibuya,

M. (1960). Bivariate extreme statistics. Ann. Inst. Math. Statist. 11, 195–210.

2.6. The Tail Dependence Parameter

75

The conditional probability in (2.59) is independent of the marginal dfs FX −1 and FY when x and y are replaced by the quantiles FX (u) and FY−1 (v). In the sequel, let u = v. The tail dependence parameter χ(u) of X and Y at the level u is

−1 (u) χ(u) = P Y > FY−1 (u)X > FX = P (V > u|U > u), (2.60) where (U, V ) = (FX (X), FY (Y )) is the pertaining copula random vector with (0, 1)–uniformly distributed marginal random variables U and V , if FX and FY are continuous (according to the probability transformation). It is always understood that u is close to 1, that is, we are dealing with probabilities in the upper tail region of the joint distribution of X and Y or, respectively, of U and V . The term χ = lim χ(u) u→1

(2.61)

is addressed as tail dependence parameter. We have tail independence, if χ = 0, and total tail dependence if χ = 1. We list some properties of the tail dependence parameters: • χ(u) and χ are symmetric in X and Y ; • χ(u) and χ range between zero and one; • if X and Y are stochastically independent (in the usual sense), then χ(u) = 1 − u and χ = 0; therefore, independence implies tail independence, • if X = Y , then χ(u) = 1 and χ = 1. However, one should be aware that tail independence does not imply independence. Let W (x, y) = 1 + x + y for x, y ≤ 0 and x + y ≥ −1. Then, χ(u) = 0 if u ≥ 1/2 and, therefore, also χ = 0. Thus, we have tail independence. Yet, W is the joint df of the totally dependent rvs Z and −(1 + Z) where Z is on (−1, 0)–uniformly distributed. The sample version pertaining to χ(u) and χ, based on data (xi , yi ) under the df F , is

1 I(xi > x[nu]:n , yi > y[nu]:n ). (2.62) χn (u) = n(1 − u) i≤n

For a continuation of this topic we refer to the Chapters 12 and 13 which concern multivariate extreme value and multivariate generalized Pareto models. For

76

2. Diagnostic Tools

such multivariate distributions, the dependence structure is of central importance (besides of the univariate marginals). We particularly refer to Section 12.1, where we describe the relationship of the tail dependence parameter χ to the Pickands dependence function D, and to Section 13.3 for the deﬁnition of other tail dependence parameters χ ¯ and β which determine the rate at which the tail independence is attained.

The Auto–Tail–Dependence Function Next, let X1 , . . . , Xn be a series of identically distributed random variables with common df F . Assume, in addition, that the series has stationary dependencies in the upper tail in the sense that for i ≤ n − h,

= P X1+h > F −1 (u)X1 > F −1 (u) P Xi+h > F −1 (u)Xi > F −1 (u) =: ρ(u, h) (2.63) which deﬁnes the auto–tail–dependence function at the level u. Likewise one deﬁnes an auto–tail–dependence function ρ(h) by ρ(h) = lim ρ(u, h) u→1

(2.64)

as the limit of ρ(u, h) for u → 1. The auto–tail–dependence functions ρ(u, h) at the level u can be estimated by the sample version ρn (u, h) =

1 I(min(xi , xi+h ) > x[nu]:n ) n(1 − u)

(2.65)

i≤n

based on data x1 , . . . , xn . It is clear that ρn (u, h) also serves as an estimate of ρ(h), where a suﬃciently large u must be selected by the statistician. The level (threshold) u should be suﬃciently large to reduce the bias, and small enough to reduce the variance of the estimator. Another auto–tail–dependence function ρ¯ will be introduced in Section 13.3 in conjunction with the tail dependence parameter χ¯ which measures the degree of tail independence.

2.7

Clustering of Exceedances

In conjunction with extreme values, it has been implicitly assumed in foregoing sections that the data x1 , . . . , xn are generated independently from each other or, at least, the dependence between the data is negligible. In Section 2.6 we already started with a preliminary discussion about dependence concepts in conjuction with tail dependence parameters. In that context,

2.7. Clustering of Exceedances

77

another feature will be captured by the phenomenon that stronger dependence may lead to a clustering of extreme values. The clustering of data is also related to another important parameter in extreme value theory, namely the extremal index θ (as indicated in this section, see below, and further mentioned in Section 6.2).

Building Clusters by Runs, the Mean Cluster Size Given x1 , . . . , xn let xi(1) , . . . , xi(k) again denote the exceedances over a predetermined threshold u. For some choice of a positive integer r, called the run length, deﬁne clusters of exceedance times i(j) in the following manner. Any run of at least r consecutive observations xi below the threshold u separates two clusters. Hence, there is a minimal gap of length r between two consecutive clusters of exceedance times.

2

1.5

Fig. 2.20. Six clusters above u = 1 with respect to a run length r = 3 of a Gaussian AR(1) series with d = 0.8 with cluster sizes between 1 and 5.

1 0.0

50

25

75

100

time We introduce the mean cluster size that characterizes the clusters to some extent. Let n(u, r) denote the number of clusters over u. The mean cluster size, relative to u and the run length r, is mcsize(u, r) = k/n(u, r).

(2.66)

The mean cluster size is a useful statistic for describing extreme data besides an estimate of the tail index.

The Blocks Method Clusters of exceedance times may also be built by the blocks method (also called Gumbel method) as mentioned in Section 1.2. Each block containing at least one exceedance time is treated as a cluster (cf. [16], pages 242–243, and the literature cited therein for more details).

78

2. Diagnostic Tools

Declustering To obtain data that correspond more closely to a model of iid random variables, one may reduce the sample of exceedances to that of the cluster maxima. This topic will be further pursued within the framework of Poisson counting processes, see Section 9.2.

The Cluster Size Distribution The following discussion merely concerns the run length deﬁnition of clusters. Let |µ| denote the size of a cluster µ of exceedance times for the given exceedances xi(1) , . . . , xi(k) over u according to the run length r. The relative number of clusters with size j deﬁnes the (dicrete) cluster size distribution Pu,r on the set 1, . . . , k. We have Pu,r ({j}) :=

|{µ : |µ| = j}| , n(u, r)

1 ≤ j ≤ k.

(2.67)

The mean of the cluster size distribution Pu,r is the mean cluster size mcsize(u, r) as introduced in (2.66) before. The illustration in Fig. 2.21 concerns the exceedances over a threshold u = 1 of 4000 Gaussian AR(1) data generated under the correlation coeﬃcient d = 0.8. The exceedances as well as the exceedance times are plotted. One clearly recognizes the clustering in the exceedances xi(j) as well as in the exceedance times. 4

2

0 0

1

time i/n Fig. 2.21. Scatterplot of exceedances over the threshold u = 1 of 4000 Gaussian AR(1) data with correlation coeﬃcient d = 0.8.

2.7. Clustering of Exceedances

79

We remark that the number of exceedances over 1 (respectively, 2, 3) in Fig. 2.21 is 707 (respectively, 102, 12). Next, the run length r is chosen equal to 1. In Fig. 2.22 (left), the cluster size distribution for u = 1 and the (reciprocal) mean cluster sizes for varying u ≥ 1 are plotted.

mcsize

4

0.4

2

0 1

2

3

4

threshold u 1

rec. mcsize

0.2

0

0.5

0

0

5

10

15

1

cluster size

2

3

4

threshold u

Fig. 2.22. Cluster size distribution for u = 1 and r = 1 (left). Mean cluster sizes (right, top) and reciprocal mean cluster sizes for u ≥ 1 and r = 1 (right, bottom).

The reciprocal mean cluster sizes 1/mcsize(u, r) will also be written θ(u, r). The reciprocal mean cluster sizes θ(u, r) are related to the extremal index, denoted by θ, which will be discussed in Section 6.2. In Fig. 2.23, θ(·, r) is plotted against the threshold u for run lengths r = 1, 2, 5, 10.

rec. mcsize

1

0.5

r=1

Fig. 2.23. Reciprocal mean cluster sizes for u ≥ 1 and r = 1, 2, 5, 10.

r=10 0 1

2

3

4

threshold u

We also include plots of the reciprocal mean cluster sizes θ(·, r) of Gaussian

80

2. Diagnostic Tools

AR(1) data for the sample size n = 4000, corresponding to those in Fig. 2.23, for d = 0.4 and d = 0.6.

Fig. 2.24. Reciprocal mean cluster sizes θ(u, r) for d = 0.4 and d = 0.6 and u ≥ 1, r = 1, 2, 5, 10

For smaller d, that is the situation closer to independence, the reciprocal mcsizes are closer to 1. Likewise, one may deal with mean cluster sizes and cluster size distributions depending on the number k of exceedances as a parameter.

Part II

Statistical Inference in Parametric Models

Chapter 3

An Introduction to Parametric Inference In the preceding chapters, we emphasized the visual viewpoint of representing data and ﬁtting parametric distributions to the data. This is the exploratory approach to analyzing data. In the present chapter, we add some parametric estimation and test procedures which have been partially deduced from the visual ones. This chapter gives us the opportunity to reinforce previous knowledge as well as to ﬁll gaps. For example, we give a detailed description of the parametric bootstrap in conjunction with conﬁdence intervals in Section 3.2. The p–value is employed instead of a ﬁxed signiﬁcance level in testing problems. We introduce some classical estimation procedures in the exponential, Gaussian and Poisson models in order to give an outline of our approach within a familiar setting. This is done in the Sections 3.1, 3.4 and 3.5. Recall that exponential distributions belong to the family of generalized Pareto (GP) distributions. Gaussian distributions are on the agenda because we want to compare classical statistical procedures in Gaussian models with those inﬂuenced by extreme value analysis. The Sections 3.2 and 3.3 are devoted to conﬁdence intervals and test procedures for parametric models. Poisson distributions are of interest in extreme value analysis because the number of exceedances above a higher threshold can be modeled by such distributions. Bayesian analysis gains more and more importance in our investigations. In Section 3.5, we give an introduction to the Bayesian estimation principle within a decision theoretic framework and collect some relevant examples of Bayesian estimators in continuous and discrete models.

84

3.1

3. An Introduction to Parametric Inference

Estimation in Exponential and Gaussian Models

In the preceding chapter, a normal df was visually ﬁtted to the sample df. Subsequently, automatic procedures are provided using estimators of the location and scale parameters. We present some prominent estimators of the mean µ and the standard deviation σ within the normal (Gaussian) model {Φµ,σ : µ real, σ > 0}. Keep in mind that the normal dfs and densities will not be represented by the variance σ 2 , but by the standard deviation (scale parameter) σ. We start with a likelihood–based estimator, namely, the maximum likelihood estimator in exponential and Gaussian models. Other likelihood–based estimators are the Bayesian estimators.

Maximum Likelihood Estimation in the Exponential Model We compute the maximum likelihood estimate (MLE) for the model of exponential densities gϑ (x) = ϑ exp(−ϑx), x > 0, where ϑ > 0 is the unknown reciprocal scale parameter. Remember that the joint density of iid exponential variables X1 , . . . , Xn with parameter ϑ is gϑ (xi ), x = (x1 , . . . , xn ), g(x|ϑ) = i≤n

cf. also (10.10) in the multivariate part of this book. The MLE ϑˆn maximizes the likelihood function gϑ (xi ) L(ϑ) = i≤n

for the given sample x = (x1 , . . . , xn ). Now compute the MLE by taking the derivative of the log–likelihood function log L(ϑ) and solving the likelihood equation (log L) (ϑ) = 0. The solution is the reciprocal sample mean ϑˆn = 1/¯ x=n i≤n xi . Likewise, the sample mean is the MLE of the scale parameter in the exponential model.

Maximum Likelihood Estimation in the Gaussian Model The joint density of iid normal random variables X1 , . . . , Xn with mean and standard deviation (location and scale parameters) µ and σ is ϕ(x|µ, σ) = ϕµ,σ (xi ), x = (x1 , . . . , xn ), i≤n

3.1. Estimation in Exponential and Gaussian Models

85

where the density of Φµ,σ is denoted by ϕµ,σ again. The MLEs of µ and σ in the normal model are the sample mean and the sample standard deviation µ ˆn = x ¯

and

σ ˆn =

1

2 (xi − µ ˆn ) n

1/2 .

(3.1)

i≤n

The estimate (ˆ µn , σ ˆn ) maximizes the likelihood function L(µ, σ) = ϕ(x|µ, σ) ˆ n and σ ˆn may be computed as the for the given sample x1 , . . . , xn . The values µ the solutions to the likelihood equations ∂ log L(µ, σ) = 0 ∂µ

and

∂ log L(µ, σ) = 0 ∂σ

obtained by the partial derivatives of the log–likelihood function. Example 3.1.1. (Michelson’s Determination of the Velocity of Light in the Air from 1879.) Using a reﬁnement of Foucault’s method, Michelson obtained n = 100 measurements of the velocity of light in the air1 . The values in Table 3.1 plus 299,000 in km/sec are Michelson’s determinations of the light speed in the air (stored in the order of the outcome in the ﬁle nu–miche.dat). Table 3.1. Michelson’s 1879 measurements of the velocity of light in the air. 620 650 720 720 720 740 740 740 750 760

760 760 760 760 770 780 780 790 790 790

800 800 800 800 800 810 810 810 810 810

810 810 810 810 810 820 820 830 830 840

840 840 840 840 840 840 840 850 850 850

850 850 850 850 850 860 860 860 870 870

870 870 870 880 880 880 880 880 880 880

880 880 890 890 880 900 900 910 910 920

930 930 940 940 940 950 950 950 960 960

960 960 970 980 980 980 1000 1000 1000 1070

The Q–Q plot in Fig. 3.1 conﬁrms a normal modeling for the measurements. The MLEs are µ ˆ = 852.4 and σ ˆ = 78.6. In addition, the plots of the estimated parametric density and a kernel density are suﬃciently close to one another. Thus, 299,841.7 km/sec is a parametric estimate of the light speed in the air. The universally–accepted light speed in a vacuum is about 299,792.5 km/sec. To obtain the light speed in the air, this value must be multiplied by a correction factor which depends on atmospheric humidity, pressure and temperature. By employing the correction factor taken by Michelson, one arrives at the value 299,734.5; other reasonable choices of 1 See

also Andrews, D.F. and Herzberg, A.H. (1985). Data. Springer, New York.

86

3. An Introduction to Parametric Inference

950

km/sec

0.004

0.002 650 -2

-1

0

1

2

0 600

800

1000

1200

km/sec

Fig. 3.1. (left.) Normal Q–Q plot for Michelson’s data. (right.) Kernel density (dotted) with b = 70 and normal density (solid) with parameters given by the MLE.

the correction factor would lead to a similar conclusion. Thus, due to a systematic error in the experiment, the correct normal modeling of Michelson’s data and the skillfully deﬁned MLE are merely of limited relevance to evaluating the target parameter, namely the “true” light speed. For a continuation, see Example 3.2.1, where a conﬁdence interval is presented.

It is likely that some of the readers are disappointed or even frustrated by the foregoing example, yet it was deliberately chosen to enforce a critical attitude and to exhibit certain limitations of statistical inference.

The Moment Estimation Method The MLEs µ ˆn and σ ˆn in the normal model may be classiﬁed as moment estimates, because µ ˆn and σ ˆn2 are the sample mean and sample variance, and µ and σ 2 are the mean and the variance of the normal df Φµ,σ . Generally, moment estimates are obtained by equating the sample moments with the pertaining moments of parametric distributions. A similar method is introduced in Section 14.5, where ordinary moments are replaced by L–moments.

The Quantile Estimation Method, L–Statistics Recall from (2.9) that x[nq]:n is an estimate of the q–quantile. In a location and scale parameter family, we have x[nq]:n ≈ µ + σF −1 (q). Such a relation can be employed to estimate µ and σ (and further parameters if necessary). In the normal case, the median x[n/2]:n is an estimate of µ. By taking diﬀerences, one eliminates the location parameter and ﬁnds an estimate of σ. For example, the interquartile

3.1. Estimation in Exponential and Gaussian Models

87

range leads to the well–known robust estimate (x[3n/4]:n − x[n/4]:n )/(2Φ−1 (3/4)) of σ in the normal location and scale parameter family. Estimators of this type may be classiﬁed as quick or systematic estimators. Example 3.1.2. (Fitting a Normal Distribution When Fat Tails are Correct.) To data x1 , . . . , xn , which are governed by a symmetric distribution F with fat or heavy tails, one may ﬁt a normal df with location parameter µ = 0 and scale parameter given by the sample standard deviation, or quick estimators such as σ ˆn = x[nq]:n Φ−1 (q)

(3.2)

based on the xi , or, under a condition of symmetry imposed on F , σ ˜n = y[nq]:n Φ−1 ((1 + q)/2)

(3.3)

based on yi = |xi |. By the deﬁnition of σ ˆn , the normal df Φ0,ˆσn has the q–quantile x[nq]:n and, therefore, the weight of Φ0,ˆσn and the number of data beyond the point x[nq]:n correspond to each other. Typically, σ ˆn > sn and σ ˜n > sn and the normal dfs pertaining to the quick estimates are more appropriate as estimators of the tails of F .

More generally, one may deal with L–statistics (linear combination of order statistics) of the form i≤n ci,n xi:n which provide a rich class of statistics for estimating parameters (see, e.g., [48]). Special L–statistics will by utilized in conjunction with the L–moment estimation method which will be introduced in Section 14.5.

The Least Squares Estimation Method Location and scale parameters µ and σ may be estimated by a least squares method. The points of a normal Q–Q plot in (2.39) are close to the straight line (x, σx + µ) and, therefore, also close to the least squares line (x, ax + b) as deﬁned by (2.40). Consequently, the two straight lines (x, σx + µ) and (x, ax + b) are close together. This yields that the intercept b and the slope a of the least squares line provide plausible estimates of the location and scale parameters µ and σ. It is advisable to use a trimmed version of the least squares procedure. Thus, ﬁrst omit a certain number of upper and lower extremes from the sample, and then apply the least squares method. This least squares method for estimating location and scale parameters can be utilized for any df F in place of the normal df Φ.

88

3. An Introduction to Parametric Inference

The Minimum Distance Method By visually ﬁtting a normal df or density to the sample df or, respectively, to a kernel density or histogram, one is essentially applying a minimum distance (MD) method. ˆn ) is an MDE2 , if Let d be a distance on the family of dfs. Then, (ˆ µn , σ d(Fn , Φµˆn ,ˆσn ) = inf d(Fn , Φµ,σ ), µ,σ

where Fn again denotes the sample df. The distance may also be based on a distance between normal densities ϕµ,σ and sample densities fn . One must apply the Hellinger distance 2 1/2 1/2 1/2 H(ϕµ,σ , fn ) = (3.4) ϕµ,σ (x) − fn (x) dx to obtain asymptotically eﬃcient estimators3 (a property which is shared by the MLE). The Hellinger or L2 distances also possess computational advantages, because, then, the distances d(ϕµ,σ , fn ) are diﬀerentiable in µ and σ.

The M–Estimation Method In view of an application in Section 5.1 we deal with M–estimators in scale parameter models {Fσ : σ > 0} with special emphasis laid on the exponential scale parameter model. Let f be the density of F = F1 . The MLE of the scale parameter is a special M–estimator as the solution to the likelihood equation

ψML (xi /σ) = 0, i≤n

where the M–function is ψML (x) = −xf (x)/f (x) − 1. In the exponential model, where f (x) = e−x , x ≥ 0, we have ∗ (x) = x − 1, ψML

and the MLE of the scale parameter is the sample mean. Generally, M–estimates of σ are solutions to M–equations

ψ(xi /σ) = 0,

(3.5)

(3.6)

i≤n

where ψ is the M–function with

ψ(x)f (x)dx = 0. In addition,

2

The L2 distance between normal densities and histograms was used in Brown, L.D. and Gene Hwang, J.T. (1993). How to approximate a histogram by a normal density. The American Statistician 47, 251–255. 3 Beran,

R.J. (1977). Minimum Hellinger distance estimates for parametric models. Ann. Statist. 5, 445–463.

3.1. Estimation in Exponential and Gaussian Models

89

• boundedness of ψ is required to achieve robustness against gross errors, • ψ should be close to ψML in order to gain eﬃciency of the estimator. An estimator satisfying both requirements is obtained by truncating ψML (see [27], page 122). Such M–functions go back to P.J. Huber [30]). For the exponential model, we use M–functions of the form ψb∗ (x) = − exp(−x/b) + b/(1 + b).

(3.7)

∗ Check that ψb∗ is bounded and bψb∗ (x) → ψML (x) as b → ∞ (apply (1.66)). Because ∗ ψML is diﬀerentiable, one can apply the Newton–Raphson iteration procedure to solve the M–equation (3.6).

Covering Probabilities The accuracy of an estimator can also be measured directly by the df of the estimator: the probability that the absolute deviation of the sample mean X from the true mean mF is smaller or equal to some t > 0 has the representation P {|X − mF | ≤ t} = P {X ≤ mF + t} − P {X < mF − t}. If F = Φµ,σ and the Xi are independent, this yields P |X − µ| ≤ tσ/n1/2 = 2Φ(t) − 1. In greater generality, we have P |X − mF | ≤ tsF /n1/2 ≈ 2Φ(t) − 1,

(3.8)

(3.9)

(3.10)

for every df F which possesses a ﬁnite standard deviation sF . These two formulas lead to exact and asymptotic conﬁdence intervals for the mean of a distribution (cf. Section 3.2).

The Bias and the Mean Squared Error (MSE) of an Estimator Let us deal with the special case of estimating the location parameter µ in the normal model and, generally, with estimating the mean mF = x dF (x) of a df F . The natural estimator of mF is the sample mean X = n1 i≤n Xi , where the Xi are identically distributed with common df F . We have EX = mF . Hence, the bias EX − mF is equal to zero, and X is an unbiased estimator of mF . For such an unbiased estimator, the variance E(X − mF )2 is an appropriate measure for the accuracy. Generally, the performance of an estimator ϑˆn of a parameter ϑ can be measured by the mean squared error (MSE) which is the expected squared deviation of the estimator from the target parameter. We have

2

2 E(ϑˆn − ϑ)2 = E ϑˆn − E(ϑˆn ) + E(ϑˆn ) − ϑ =: V (ϑˆn ) + Bias2 (ϑˆn ). (3.11)

90

3. An Introduction to Parametric Inference

For unbiased estimators, the MSE is the variance. The bias that occurs when the model is incorrect is essential for the performance of an estimator. The MSE plays a central role in the deﬁnition of the Bayes estimator which will be dealt with in the subsequent lines.

3.2

Conﬁdence Intervals

Intervals based on the data are constructed so that the true parameter falls into such an interval in (1− α)× 100% of the trials. One obtains 95% or 99% conﬁdence intervals, if α = 0.05 or α = 0.01. We mostly deal with conﬁdence intervals based on estimators. Such a conﬁdence interval also provides a measure for the accuracy of the estimator. First, we will employ (3.9) and (3.10) to construct conﬁdence intervals for the mean of a distribution.

Conﬁdence Intervals for the Mean First assume that the data x1 , . . . , xn are governed by a normal df Φµ,σ0 with µ unknown and σ0 ﬁxed. Let u(α) = Φ−1 (1 − α) denote the (1 − α)–quantile of Φ. (3.9) yields that, with probability 1 − α, a sample x1 , . . . , xn is drawn such that the interval [¯ x − σ0 u(α/2)/n1/2 , x¯ + σ0 u(α/2)/n1/2 ] (3.12) covers µ. Thus, we gain a (1 − α) conﬁdence interval for the mean. If σ0 in (3.12) is unknown, then the interval bounds are also unknown to the statistician. Yet, if σ0 is replaced by the sample standard deviation sn , one gets an interval which is merely based on the data. This leads to a conﬁdence interval that approximately attains the level 1 − α. To obtain a conﬁdence interval such that the level 1 − α is attained exactly, one must adopt quantiles of the t–df with n − 1 degrees of freedom, see (1.62). Example 3.2.1. (Continuation of Example 3.1.1 about Michelson’s 1879 Determination of the Velocity of Light in the Air.) The conﬁdence interval of level .99 for the unknown mean value µ∗ is [¯ x − 2.58sn n−1/2 , x ¯ + 2.58sn n−1/2 ] = [832.1, 872.7]. Thus, when Michelson’s experiment is repeated for several times, then µ∗ would fall into such intervals in 99 % of the trials. Whereas the value of 299,841.7 km/sec determined by Michelson might be an acceptable estimate of the light–speed in the air—there is a deviation of 107.2 km/sec— the measuring of the accuracy of the estimate by means of the conﬁdence interval must be regarded as a failure.

From (3.10), we know that an asymptotic conﬁdence interval for the mean is still obtained by the preceding construction if the normal distribution is replaced

3.2. Conﬁdence Intervals

91

by any df which has a ﬁnite variance. This construction can be extended to other functional parameters.

Asymptotic Conﬁdence Intervals for Functional Parameters We deal with the fairly general case of two–sided conﬁdence intervals for a functional parameter T (ϑ) of a parametric df Fϑ with ϑ ∈ Θ. We assume that a consistent estimator ϑˆn of the parameter ϑ is available. In analogy to (3.10), assume that Tn (X) is an estimator of T (ϑ) such that (3.13) P Tn (X) − T (ϑ) ≤ ts(ϑ)/n1/2 ≈ 2Φ(t) − 1, where X = (X1 , . . . , Xn ) is a vector of n iid random variables Xi with common df Fϑ , and s(ϑ) are normalizing constants varying continuously in ϑ. Let x be the vector of data xi governed by Fϑ . If ϑˆn (x) ≈ ϑ, then s(ϑˆn (x)) ≈ s(ϑ). Therefore, corresponding to (3.12), the vectors x = (x1 , . . . , xn ) are drawn, with probability approximately equal to 1 − α, such that the intervals s(ϑˆn (x))u(α/2) s(ϑˆn (x))u(α/2) (3.14) , T (x) + Tn (x) − n n1/2 n1/2 cover the functional parameter T (ϑ). For the preceding construction, one needs a precise knowledge of the asymptotic behavior of the estimator of the functional parameter T (ϑ). In particular, the normalizing constants s(ϑ) must be known to the statistician. Otherwise, conﬁdence intervals may be constructed by means of the bootstrap4 approach.

Parametric Bootstrap Conﬁdence Intervals We will brieﬂy explain the bootstrap approach within a parametric framework (also see [49] and the review paper by Manteiga and S´anchez5 ). Let Tn (x) be an estimate of the functional parameter T (ϑ) based on x = (x1 , . . . , xn ). Assume that ϑˆn is a consistent estimator of ϑ. Usually, we have Tn (x) = T (ϑˆn (x)) The parametric bootstrap df based on the vector x of data is given by n (x; t) = P Tn (Z) − T (ϑˆn (x)) ≤ t , B (3.15) where Z = (Z1 , . . . , Zn ) is a vector of iid random variables with common df Fϑˆn (x) . n (x; ·) is known to the statistician (at least, theoretically). Denote Notice that B n (x; ·) by the (1 − α)–quantile of the bootstrap df B n−1 (x; 1 − α). cn,α (x) = B

(3.16)

4 A term coined in Efron, B. (1979). Bootstrap methods: another look at the jackknife. Ann. Statist. 7, 1–26. 5 Manteiga,

W.G. and S´ anchez, J.M.P. (1994). The bootstrap—a review. Comp. Statist. 9, 165–205

92

3. An Introduction to Parametric Inference

Under certain regularity conditions, the intervals in (3.14) can be replaced by the bootstrap conﬁdence intervals (3.17) Tn (x) − cn,α (x), Tn (x) + cn,α (x) . A justiﬁcation of the bootstrap approach will be provided at the end of this section. First, the value cn,α (x) will be computed by employing the Monte Carlo method.

Simulating the Bootstrap Conﬁdence Bounds Generate data z1,j , . . . , zn,j , j = 1, . . . , N, according to the df Fϑˆn (x) . Notice that the bootstrap sample bj = |Tn (z1,j , . . . , zn,j ) − T (ϑˆn (x))|,

j = 1, . . . , N,

(3.18)

n (x; ·). According to (2.9), the bootstrap sample is governed by the bootstrap df B (1 − α)–quantile b[(1−α)N ]+1:N satisﬁes the relation −1 (x; 1 − α) b[(1−α)N ]+1:N ≈ B n

(3.19)

which yields that c˜n,α (x) = b[(1−α)N ]+1:N may be taken in (3.17) in place of cn,α (x). In order to obtain a suﬃciently accurate estimate of the bootstrap (1 − α)– quantile in (3.19) for typical values α = .01 and α = .05, we suggest taking N = max(n, 2000) as the sample size for the simulation.

A Justiﬁcation of the Bootstrap Approach One must verify that P Tn (X) − T (ϑ0 ) ≤ cn,α (X) ≈ 1 − α

(3.20)

where X = (X1 , . . . , Xn ) is a vector of iid random variables with common df Fϑ0 . If (3.13) holds uniformly in a neighborhood of ϑ0 and s(ϑˆn (x)) ≈ s(ϑ0 ), then the bootstrap df is an estimate of the centered distribution of the estimator Tn (X), that is, n (x; t) ≈ P Tn (X) − T (ϑ0 ) ≤ t . (3.21) B Moreover, from (3.13) we know that P Tn (X) − T (ϑ0 ) ≤ dn,α ≈ 1 − α,

(3.22)

where dn,α = n1/2 Φ−1 (1 − α/2)/s(ϑ0 ). Now, deduce from (3.21) and (3.22) that dn,α /cn,α (x) ≈ 1 which implies that dn,α can be replaced by cn,α (X) in (3.22). Thus, (3.20) holds true.

3.3. Test Procedures and p–Values

93

Extensions In many applications, a framework more general than that of replicates x1 , . . . , xn is required. For example, one may deal with measurements xi at time ti governed by a df Fβ0 +β1 ti ; the joint experiment is determined by the parameter vector (β0 , β1 ). Likewise, one may deal with one–sided bootstrap conﬁdence intervals. For that purpose take a bootstrap sample with Tn (z1,j , . . . , zn,j ) − T (ϑˆn (x)) instead of bj in (3.18).

3.3

Test Procedures and p–Values

In this section we brieﬂy discuss critical regions of a signiﬁcance level α and their representation by means of a p–value. In statistical software packages, the output of a test usually consists of the p–value, whereby it is understood that the user has some signiﬁcance level in mind. The major advantage of the p–value is that the signiﬁcance level must not be speciﬁed in advance.

Test Statistics and Critical Values Let {Fϑ } be a family of dfs, where ϑ varies over a parameter space Θ. Let Θ0 and Θ1 be the null hypothesis and the alternative, where Θ0 and Θ1 constitute a partition of Θ. A decision for or against the null hypothesis may be based on a critical region C. If x = (x1 , . . . , xn ) belongs to the critical region C, then the null hypothesis is rejected. Throughout, we consider critical regions of the special form Cα = {x : T (x) ≥ G−1 (1 − α)}

(3.23)

of a signiﬁcance level α, where T is a test statistic and G is a df. The usual signiﬁcance levels are α = .05 or α = .01. Thus, the null hypothesis is rejected whenever T (x) exceeds the critical value G−1 (1 − α). Let X = (X1 , . . . , Xk ) be a vector of iid random variables with common df Fϑ , where ϑ belongs to the null hypothesis. Usually, G is the exact or asymptotic df of the test statistic T (X) for a certain parameter ϑ in the null hypothesis. We have (3.24) P {T (X) ≥ G−1 (1 − α)} ≤ α. The null hypothesis is rejected, although it is true with a probability bounded by α.

The p–Value We introduce the p–value in conjunction with critical regions as given in (3.23). Let T be the test statistic and let G be the exact or approximate df of T (X) under

94

3. An Introduction to Parametric Inference

some appropriate parameter in the null hypothesis. Notice that {x : T (x) ≥ G−1 (1 − α)}

= =

{x : G(T (x)) ≥ 1 − α} {x : p(x) ≤ α},

where p(x) = 1 − G(T (x)).

(3.25)

Now the decision will be based on the p–value p(x). If one has a signiﬁcance level α in mind, then the null hypothesis is rejected whenever p(x) ≤ α. The p–value is also called the sample signiﬁcance level, because p(x) is the smallest signiﬁcance level α such that the null hypothesis is rejected6 . According to the probability transformation (cf. page 38), the random variable p(X) is uniformly distributed on [0, 1] if G is the distribution of T (X) under the null hypothesis.

Evaluation of p–Values for the Normal Model We mention three simple, well–known testing problems in the normal model and specify the p–values. • (One–Sided Test of the Mean with Known Variance.) The testing of the null hypothesis H0 : µ ≤ µ0 against the alternative H1 : µ > µ0 , with σ = σ0 known, is based on the critical region x ¯ − µ0 ≥ Φ−1 (1 − α) , Cα = x : 1/2 σ0 /n where x ¯ is the sample mean again. Then, the p–value is x ¯ − µ0 . p(x) = 1 − Φ σ0 /n1/2 • (One–Sided t–Test of the Mean with Unknown Variance.) When testing the same hypotheses as before with σ being unknown, let x ¯ − µ0 −1 ≥ t (1 − α) , Cα = x : n−1 s/n1/2 where tn−1 is the Student df with n − 1 degrees of freedom, and s2 is the sample variance again. The explicit form of the Student density may be found in (1.62) and (6.14). The p–value is x ¯ − µ0 . p(x) = 1 − tn−1 s/n1/2 6 See,

e.g., Rice, J.A. (1988). Mathematical Statistics and Data Analysis. Wadsworth & Brooks, Paciﬁc Grove.

3.3. Test Procedures and p–Values

95

• (One–Sided Testing of the Mean with Asymptotic p–Value.) Because the Student distribution is asymptotically normal as n → ∞, we know that tn−1 can be replaced by the standard normal df Φ for larger sample sizes n. The p–value is x ¯ − µ0 . p(x) = 1 − Φ s/n1/2 This p–value can be generally employed for testing the mean of a distribution under the conditions of the central limit theorem. We started with a likelihood ratio (LR) test statistic for simple hypotheses and replaced the unknown standard deviation by the corresponding sample coefﬁcient. The latter test statistic is based on the ﬁrst and second sample moments.

Asymptotic p–Values for the Multinomial Model, χ2 and Likelihood Ratio Statistics We mention the χ2 and LR–statistics for the multinomial model and specify the pertaining p–values. Let X1 , . . . , Xn be iid random variables and let B0 , . . . , Bm be a partition of the real line (or, generally, of the Euclidean d–space). Then, the joint distribution of the random numbers

Ni = I(Xj ∈ Bi ), i = 0, . . . , m, j≤n

is a multinomial distribution Mn,p with parameter vector p = (p0 , . . . , pm ), where pi = P {X1 ∈ Bi }. For n = (n0 , . . . , nm ) with m j=0 nj = n, we have Mn,p ({n}) = =

P {N0 = n0 , . . . , Nm = nm } m n! n p j. n0 ! · · · nm ! j=0 j

Notice that the parameter vector belongs to the space Km =

p : pj ≥ 0,

m

! pj = 1 .

j=0

We are testing a composite null hypothesis K0 which is a subspace of Km . • (The χ2 –Statistic.) The χ2 –statistic is Tχ2 (n) =

m

(nj /n − pˆj,0 (n))2 j=0

pˆj,0 (n)/n

,

(3.26)

ˆ 0 (n) = (ˆ where p p0,0 (n), . . . , pˆm,0 (n)) is an MLE for K0 . Under the null hypothesis, the asymptotic df of the χ2 –statistic is a χ2 –df χ2k with k degrees

96

3. An Introduction to Parametric Inference of freedom (see Section 4.3), where k is the diﬀerence of the dimension m of Km and the dimension of the null hypothesis K0 . Therefore, the (asymptotic) p–value is pχ2 (n) = 1 − χ2k (Tχ2 (n)). ˆ 0 = p0 and k = m. If the null hypothesis is simple, say, K0 = {p0 }, then p The χ2 –statistic in (3.26) is the Pearson χ2 –statistic. • (The Likelihood Ratio (LR) Statistic.) The LR statistic for the preceding testing problem is TLR (n) = =

supp∈Km Mn,p ({n}) supp∈K0 Mn,p ({n}) m

nj nj log , 2n n nˆ p (n) j,0 j=0 2 log

(3.27)

ˆ (n) = (n0 /n, . . . , nm /n) is the MLE for the full parameter space Km where p ˆ 0 (n) = (ˆ and p p0,0 (n), . . . , pˆm,0 (n)) is the MLE again for K0 . Under the null hypothesis, the LR statistic has the same asymptotic df as the preceding χ2 –statistic. Therefore, the p–value is pLR (n) = 1 − χ2k (TLR (n)). Examples of χ2 and LR–tests are given in the subsequent section, where a goodness–of–ﬁt test is employed to the Poisson model.

3.4

Inference in Poisson and Mixed Poisson Models

In this section, estimating and testing within the Poisson model and the negative binomial model will be studied, whereby the latter model consists of mixed Poisson distributions. The Poisson model is relevant to extreme value analysis—as pointed out in Section 1.2—because the number of exceedances may be regarded as a Poisson random variable.

Estimation in the Poisson Model Let x1 , . . . , xn be nonnegative integers governed by a Poisson distribution Pλ with unknown parameter λ > 0. Recall that λ is the mean and variance of Pλ . ˆn = x The sample mean λ ¯ is the natural estimate of the unknown parameter ˆ λ. Note that the mean λn is also the MLE for the Poisson model {Pλ : λ > 0}.

3.4. Inference in Poisson and Mixed Poisson Models

97

Statistics for such discrete data can be expressed in terms of the number n(j) of data xi equal to j. For example, we may write

ˆn = λ jn(j) n(j) j

j

for the sample mean. There are three diﬀerent approaches for estimating a Poisson distribution: • (Nonparametric Approach.) Take the sample histogram pn (j) = n(j)/n as an estimate of the Poisson histogram Pλ {j} (see page 59); ˆ n in the Poisson • (Parametric Approach: Poisson Model) Compute the MLE λ model and display Pλˆ n {j}; • (Parametric Approach: Normal Model.) Compute the MLE (ˆ µn , σ ˆn ) in the normal model (or any related estimator) based on x1 , . . . , xn and take the normal density ϕµˆn ,ˆσn as an estimate of the Poisson histogram Pλ {j}, where this procedure is merely accurate if λ is suﬃciently large. Another estimate of the parameter λ is the sample variance s2n , due to the fact that the mean and the variance of a Poisson distribution are equal. One obtains the representation

ˆ2 . s2 = j 2 n(j) n(j) − λ n

n

j

j

A strong deviation of the sample mean from the sample variance indicates that the Poisson assumption is violated.

Goodness–of–Fit Test for the Poisson Model The null hypothesis—that the data are generated under a Poisson distribution Pλ with unknown parameter λ—is tested against any other distribution on the nonnegative integers. The likelihood ratio and χˆ2 –test in the multinomial model will be made applicable by grouping the data. Under the null hypothesis, let X1 , . . . , Xn be iid random variables with common Poisson distribution Pλ where λ is unknown. Let Bj = {j} for j = 0, . . . , m−1 and Bm = {m, m + 1, m + 2, . . .}. Thus, we are observing n = (n0 , . . . , nm ), where nj is the frequency of the observations xi in the cell Bj . The null hypothesis is K0 = (p0 (λ), . . . , pm (λ)) : λ > 0 , where pj (λ) = Pλ {j} =

λj −λ e , j!

j = 0, . . . , m − 1,

98

3. An Introduction to Parametric Inference

and pm (λ) = 1 −

m−1

pj (λ).

j=0

The null hypothesis K0 is a parameter space of dimension 1 and, therefore, the limiting df for the likelihood ratio (LR) and χ2 –statistics is the χ2 –df with k = m − 1 degrees of freedom. To make (3.27) and (3.26) applicable one must compute the MLE

ˆ . . . , pm (λ) ˆ ˆ = p0 (λ), p(λ) for K0 . For that purpose, one must ﬁnd the solution to the likelihood equation ∂ log Mn,p(λ) {n} = 0 ∂λ which is equivalent to the equation ⎛ ⎞ m−1 ∞ nm

1 ⎝

jnj + jPλ {j}⎠ . λ= n j=0 pm (λ) j=m ˆ If nm = 0, then λ(n) is the sample mean which is the MLE in the Poisson model. The likelihood ratio (LR) and the χ2 –statistics for the present problem are TLR (n) = 2n

m

nj j=0

and χ ˆ2 (n) =

n

log

nj ˆ npj (λ(n))

m 2

ˆ (nj − npj (λ(n))) . ˆ npj (λ(n))

(3.28)

(3.29)

j=0

The pertaining p–values for testing the Poisson hypothesis are pLR (n) = 1 − χ2m−1 (TLR (n)) and

ˆ2 (n)). pχ2 (n) = 1 − χ2m−1 (χ

Mixtures of Poisson Distributions, Negative Binomial Distributions Remember that the mean and variance of a Poisson distribution are equal. The Poisson modeling is untenable if the sample mean and sample variance deviate signiﬁcantly from each other. Therefore, we also deal with mixed Poisson distributions Q given by ∞ Pλ {k}f (λ) dλ, k = 0, 1, 2, . . . , (3.30) Q{k} = 0

3.4. Inference in Poisson and Mixed Poisson Models

99

where f is a mixing density. Subsequently, the mixing will be done with respect to a gamma density. When the mixing is carried out with respect to a gamma density (see (3.42)) with shape parameter r > 0 and reciprocal scale parameter d, one ﬁnds the negative binomial distribution − {k} = Br,p

Γ(r + k) pr (1 − p)k , Γ(r)Γ(k + 1)

k = 0, 1, 2, . . . ,

(3.31)

− is a geometric distriwith parameters r > 0 and p = d/(1 + d). Notice that B1,p bution (also see page 13). − The mean and the variance of the negative binomial distribution Br,p are 2 r(1 − p)/p and r(1 − p)/p . We see that the variance is larger than the mean (a property which is shared by all mixed Poisson distributions that diﬀer from a Poisson distribution). If r(1 − p(r)) → λ as r → ∞, then the mean and variance of the negative binomial distribution tend to λ. Moreover, one ends up with a Poisson distribution with parameter λ in the limit. We have − {k} → Pλ {k}, Br,p(r)

k = 0, 1, 2, . . . .

In similarity to the Poisson approximation of binomial distributions, a much stronger inequality holds. We have 1−p − (A) − Pr(1−p)/p (A)| ≤ √ |Br,p 2p

(3.32)

for each set A of nonnegative integers7 . Note that the negative binomial and the approximating Poisson distribution in (3.32) have identical mean values. Thus, a modeling by means of a Poisson as well as a negative binomial distribution is justiﬁed, if p is suﬃciently close to 1.

Estimation in the Negative Binomial Model From the mean and variance of negative binomial distributions, one may easily deduce moment estimators for that model. We also mention MLEs. • Moment Estimator: Given a sample of nonnegative integers xi , the moment estimates rˆn and pˆn of the parameters r and p are the solutions to the equations r(1 − p)/p = x¯ and r(1 − p)/p2 = s2 , where x ¯ and s2 again denote the sample mean and sample variance. We have pˆn = x¯/s2 7 Matsunawa,

and rˆn = x ¯2 /(s2 − x ¯).

T. (1982). Some strong –equivalence of random variables. Ann. Inst. Math. Statist. 34, 209–224.

100

3. An Introduction to Parametric Inference ¯pˆn /(1 − pˆn ); another If s2 ≤ x¯, take some value for pˆn close to 1 and rˆn = x plausible choice would be a Poisson distribution with parameter x¯.

• Maximum Likelihood Estimator: One must compute a solution to the likelihood equations ∂ log L(r, p) = 0, ∂p

∂ log L(r, p) = 0 and ∂r where L(r, p) =

(3.33)

− {xi } Br,p

i≤n

denotes the likelihood function. Deduce from the 2nd equation in (3.33) that p = r/(r + x ¯). By adopting the formula Γ(r + 1) = rΓ(r) and inserting the value for p in the 1st equation (3.33), one obtains 1 1

= log(1 + x¯/r) n r+j−1

(3.34)

i≤n j≤xi

with j≤0 = 0. This equation must be solved numerically, whereby the moment estimate for r may serve as an initial value of an iteration procedure. For that purpose, it is advisable to write the left–hand side of (3.34) as

I(xi ≥ j) (r + j − 1). j≤max{xi }

i≤n

In the subsequent example, Poisson and negative binomial distributions are ﬁtted to a data set of numbers of car accidents. Example 3.4.1. (Number of Car Accidents.) We deal with the classical problem of modeling the number of car accidents caused by a single driver within a given period. The present data set records the number of accidents over the period from Nov. 1959 to Feb. 1968 for 7842 drivers in the state of California (stored in the ﬁle id–cars2.dat). Table 3.2. Frequencies n(j) of number of accidents equal to j. j n(j)

0

1

2

3

4

5

6

7

8

9

10

11

5147

1859

595

167

54

14

5

0

0

0

0

1

Since the sample mean and sample variance are 0.49 and 0.68, one hesitates to ﬁt a Poisson distribution to the data. This critical attitude is conﬁrmed by plots of sample and

3.4. Inference in Poisson and Mixed Poisson Models

101

0.5

Fig. 3.2. From left to right: Sample histogram; MLE and Moment histograms in negative binomial model; MLE histogram in Poisson model.

0.25

0 0

1

2

3

4

5

number j of car accidents

Poisson histograms (cf. Figure 3.2) and a χ2 –goodness–of–ﬁt test. The usual suggestion is to ﬁt a negative binomial distribution to such numbers. The sample histogram and the negative binomial histograms pertaining to the MLE (r = 1.34, p = 0.73) and Moment estimates (r = 1.31, p = 0.73) cannot be distinguished visually (as far as the height of the bars is concerned); there is a remarkable deviation of the Poisson histogram from the other histograms.

The usual explanation for the failure of ﬁtting a Poisson distribution to data—such as those in Example 3.4.1—is that the number of accidents of a single driver may ﬁt to a Poisson distribution Pλ , yet the parameter λ varies from one driver to another. Therefore, one deals with the following two–step stochastic experiment: 1st Step.

A driver with an individual accident characteristic λ is randomly drawn according to a certain mixing distribution.

2nd Step.

The ﬁnal outcome (namely the number of claims for this driver) is generated under the Poisson distribution Pλ .

For the parametric modeling, one may take the mixture of Poisson distributions Pλ with respect to a gamma distribution with shape and reciprocal scale parameters r and d, which is a negative binomial distribution with parameters r and p = d/(1 + d), cf. (3.31). The data in Example 3.4.1 can be regarded as the outcome of 7842 independent repetitions of such a two–step stochastic experiment. Bayesian inference in Poisson models will be dealt with at the end of the subsequent section.

102

3.5

3. An Introduction to Parametric Inference

The Bayesian Estimation Principle

Bayesian estimation is another likelihood–based method besides the maximum likelihood (ML) method. In addition to the statistical model, the statistician must specify a prior distribution. In this section, we introduce Bayes estimators within a decision–theoretical framework. We estimate a real–valued functional parameter T (ϑ), where ϑ = (ϑ1 , . . . , ϑm ) is a parameter vector. This includes, e.g., the estimation • of the jth component ϑj of ϑ if T (ϑ) = ϑj , • of the mean T (ϑ) =

x dFϑ (x) of the underlying df Fϑ represented by ϑ.

The latter problem will be studied in Section 17.6 in conjunction with estimating the net premium of an individual risk.

The Prior Density, Minimizing the Bayes Risk Let T(X) be an estimator of the functional parameter T (ϑ), where X is a random variable having a distribution represented by ϑ. For example, X = (X1 , . . . , Xn ) is a sample of size n, T (ϑ) is the mean of the common distribution and T(X) is the sample mean X. The performance of T(X) as an estimator of T (ϑ) can be measured by the mean squared error (MSE) E

2

2 T(X) − T (ϑ) ϑ := E T(X) − T (ϑ) ,

cf. also page (3.11), where the left–hand side emphasizes the fact that the expectation is taken under the parameter ϑ. The performance of the estimator can be made independent of a special parameter vector ϑ by means of a “prior” probability density p(ϑ) which may be regarded as a weight function. Some prior knowledge about the parameter of interest is included in the statistical modeling by means of the prior density p(ϑ). The Bayes risk of the estimator T with respect to the prior p(ϑ) is the integrated MSE R(p, T) =

E

2 T(X) − T (ϑ) ϑ p(ϑ) dϑ1 · · · dϑm .

An estimator T, which minimizes the Bayes risk, is called Bayes estimator.

(3.35)

3.5. The Bayesian Estimation Principle

103

Computing the Bayes Estimator, the Posterior Density We introduce the posterior density, which is determined by the prior density p(ϑ) and the likelihood function, and deduce an explicit representation of the Bayes estimator by means of the posterior density. Let X = (X1 , . . . , Xn ) be a vector of iid random variables with common df Fϑ and density fϑ , where again ϑ = (ϑ1 , . . . , ϑm ) is the parameter vector. As in the discussion about the MLE on page 84, let L(x|ϑ) = fϑ (xi ) (3.36) i≤n

be the likelihood function given the sample vector x = (x1 , . . . , xn ). Using the likelihood function, one gets the representation

2

2 T(x) − T (ϑ) L(x|ϑ) dx1 · · · dxn E T(X) − T (ϑ) |ϑ = (3.37) of the MSE. We verify that the Bayes estimate can be written T ∗ (x) = T (ϑ)p(ϑ|x) dϑ1 · · · dϑm ,

(3.38)

where the function p(ϑ|x) =

L(x|ϑ)p(ϑ) L(x|ϑ)p(ϑ) dϑ1 · · · dϑm

(3.39)

is the “posterior” density for a given sample vector x, whenever the denominator is larger than zero. If ϑ is a one–dimensional parameter and T (ϑ) = ϑ, then the Bayes estimate is the mean ϑp(ϑ|x) dϑ of the posterior distribution according to (3.38). Thus, by means of the prior density p(ϑ) and the likelihood function L(x|ϑ) one gets the posterior density p(ϑ|x). Notice that the posterior density in (3.39) and the Bayes estimate can be computed whenever L(x|ϑ)p(ϑ), as a function in ϑ, is known up to a constant. Writing g(ϑ) ∝ f (ϑ), when functions g and f are proportional, we have p(ϑ|x) ∝ L(x|ϑ)p(ϑ). (3.40) To prove the representation (3.38) of the Bayes estimate, combine (3.35) and (3.37) and interchange the order of the integration. The Bayes risk with respect to the prior p(ϑ) can be written

2 T(x) − T (ϑ) L(x|ϑ)p(ϑ) dx1 · · · dxn dϑ1 · · · dϑm (3.41) R(p, T) =

2 T(x) − T (ϑ) p(ϑ|x) dϑ1 · · · dϑm f (x) dx1 · · · dxn , =

104

3. An Introduction to Parametric Inference

where f (x) = L(x|ϑ)p(ϑ) dϑ1 · · · dϑm . To get the Bayes estimate, compute for

2 every x the value z which minimizes the integral z − T (ϑ) p(ϑ|x) dϑ1 · · · dϑm . This value z can be computed by showing that the derivative

2 z − T (ϑ) p(ϑ|x) dϑ1 · · · dϑm

= 2 z − T (ϑ) p(ϑ|x) dϑ1 · · · dϑm

= 2 z − T ∗ (x)

∂ ∂z

is equal to zero, if z is equal to the value T ∗ (x) in (3.38). In those cases where the posterior density p(ϑ|x) is of the same type as the prior density p(ϑ) one speaks of a conjugate prior. An example of a conjugate prior will be given for the exponential model in (3.44). For a diﬀerent view toward the Bayesian principle we refer to Section 8.4. The results of Section 3.5 are revisited within a Poisson process setting in Sections 9.3 and 9.5. The Sections 14.5 and 17.6 concern applications of Bayesian estimators in regional ﬂood frequency analysis and reinsurance business.

The Gamma and Reciprocal Gamma Distributions Our prior densities will be usually speciﬁed by means of gamma densities or modiﬁcations of gamma densities. The gamma density with shape parameter s > 0 and reciprocal scale parameter d > 0 is given by hs,d (ϑ) =

d (dϑ)s−1 exp(−dϑ), Γ(s)

ϑ > 0.

(3.42)

It is clear from the integral representation of the gamma function in (1.32) that hs,d is a probability density. The gamma distribution in (3.42) has the mean s/d and variance s/d2 . It is the type III distribution in the Pearson system. We also remark that h1,d is an exponential density. We also introduce the reciprocal gamma distribution. If a random variable X has the gamma density ha,b , then 1/X has an reciprocal gamma density ha,b (x) =

1 (x/b)−(1+a) exp(−b/x), bΓ(a)

x > 0.

(3.43)

A prominent example of a reciprocal gamma density is the sum–stable L´evy density with index a = 1/2, also see (6.18).

The mean, variance and coeﬃcient of variation are b/(a − 1), b2 / (a − 1)2 (a − 2) and (a − 2)−1/2 , if a > 1 and a > 2, respectively. The mode is equal to b/(a + 1).

3.5. The Bayesian Estimation Principle

105

A First Example: Bayesian Estimators in the Exponential Model We compute a Bayes estimator for the model of exponential densities fϑ (x) = ϑ exp(−ϑx),

x > 0,

where ϑ > 0 is the unknown reciprocal scale parameter. The gamma density p(ϑ) = hs,d (ϑ),

(3.44)

with parameters s, d > 0, is taken as a prior.

Writing the likelihood function as L(x|ϑ) = ϑn exp − ϑ i≤n xi and representing the posterior density by p(ϑ|x) ∝ L(x|ϑ)hs,d (ϑ) ∝ hs ,d (ϑ), x (¯ x denoting the sample mean), one obtains the with s = s + n and d = d + n¯ representation p(ϑ|x) = hs ,d (ϑ) (3.45) of the posterior density which is again a gamma density. We see that gamma densities are conjugate priors for the exponential model. According to (3.38), the Bayes estimator ϑ∗n of ϑ is the mean of the posterior distribution. We have s+n . (3.46) ϑ∗n (x) = ϑp(ϑ|x) dϑ = d + n¯ x Notice that the Bayes estimates ϑ∗n (x) approach the reciprocal sample mean 1/¯ x, which is the MLE in the exponential model, with a rate of order O(1/n). The estimates can be written as the linear combination αs/d + (1 − α)/¯ x with α = 1/(1 + n¯ x/d). Bayesian estimation in Pareto models and Poisson process models with Pareto marks is dealt with on the pages 129–133 and 254–245.

Bayesian Estimation in the Poisson Model We also deal with the Bayes estimation in discrete models. For that purpose, the likelihood function for continuous data, as utilized on page 102, must be replaced by the likelihood function for discrete data. This will be illustrated for the Poisson model with repect to two diﬀerent parameterizations. • Bayes Estimator: we compute an explicit representation of the Bayes estimator within the Poisson model. The likelihood function for a sample vector k = (k1 , . . . , kn ) of size n within this discrete model is given by ˆ n of λ can be written L(k|λ) = i≤n Pλ {ki }. The MSE of an estimator λ

ˆ n (k) − λ)2 L(k|λ), ˆ n − λ)2 |λ = (λ E (λ

106

3. An Introduction to Parametric Inference where the summation runs over all vectors k = (k1 , . . . , kn ) of nonnegative integers. In the subsequent lines, we just follow the arguments concerning the Bayes risk and Bayes estimators as outlined at the beginning of this section (or apply the general arguments in Section 8.4). The gamma density p(λ) = hr,c (λ),

(3.47)

with parameters r and c, cf. (3.42), is chosen as a prior. Verify that the posterior density p(λ|k) satisﬁes p(λ|k) ∝ L(k|λ)hr,c (λ) ∝ hr ,c (λ) with r = r + i≤n ki and c = c + n. Therefore, the posterior density p(λ|k) = hr ,c (λ)

(3.48)

is also a gamma density. We see that gamma densities are conjugate priors for the Poisson model. Because the Bayes estimate of λ is the mean of the posterior density, we have r + nk¯ ∗ , (3.49) λn (k) = λp(λ|k) dλ = c+n where k¯ is the sample mean. • Bayes Estimator in a Modiﬁed Poisson Model: for later purposes (cf. Section 9.3), we shortly mention the model of reparameterized Poisson distributions PλT for parameters λ > 0, where T > 0 is some ﬁxed value. Moreover, let n = 1. The likelihood function is

L(k|λ) = (λT )k /k! exp(−λT ) (3.50) for every observed nonnegative integer k. Choosing again a gamma density p0 (λ) = hr,c (λ)

(3.51)

as a prior, one obtains the posterior density p0 (λ|k) = hr ,c (λ),

(3.52)

which is the gamma density with parameters r = r + k and c = c + T . Therefore, the Bayes estimate is r+k (3.53) λ∗k = λp0 (λ|k) dλ = c+T for all nonnegative integers k.

Chapter 4

Extreme Value Models This chapter is devoted to statistical procedures in parametric extreme value (EV) models which are especially designed for maxima. It is worth recalling that minima can be dealt with by changing the sign of the data. In Section 4.1, we deal with estimators within the Gumbel (EV0), Fr´echet (EV1), Weibull (EV2) and uniﬁed extreme value (EV) models. Q–Q plots based on estimators of the shape parameter will be employed to check the validity of such models. Tests are addressed in Section 4.2. Extensions of extreme value models and certain alternative models for the modeling of maxima are brieﬂy discussed in Section 4.3.

4.1

Estimation in Extremes Value Models

Consider data x1 , . . . , xn generated under a df F m as in Section 1.2. Thus, each xi is the maximum of m values that are governed by the df F . Think back to Section 2.1, where we found that the df F m and the pertaining density or qf can be estimated by the corresponding sample versions, namely the sample df Fn , the histogram or kernel density fn or the sample qf Fn−1 . Remember that some extreme value (EV) df G can be ﬁtted to the df F m of the maximum if the arguments in Section 1.2 are valid. This includes that, for a while, the x1 , . . . , xn may be regarded as observations governed by G. Therefore, statistical procedures within a parametric model can be applied.

The Gumbel (EV0) Model This is the traditional model in extreme value analysis which had about the same status as the normal model in other applications (with just the same advantages and negative consequences). The major advantage of the Gumbel model is that the

108

4. Extreme Value Models

distribution can be speciﬁed by location and scale parameters as in the Gaussian case. Thus, the Gumbel model is an ordinary location and scale parameter model. One of our declared aims is to overcome the potential dislike for an additional parameter—besides the location and scale parameters—and to convince the reader that an extension of the Gumbel (EV0) model to the EV model can be worthwhile. Recall that the standard Gumbel df is given by G0 (x) = exp − e−x ). By adding a location and scale parameters µ and σ, one gets the Gumbel (EV0) model {G0,µ,σ : µ real, σ > 0}.

EV0:

We mention the following estimators for µ and σ. • MLE(EV0): the MLEs µn and σn of the location and scale parameters must be evaluated numerically. First, compute σn as the solution to the equation

xi + xi exp(−xi /σ) exp(−xi /σ) = 0. (4.1) σ − n−1 i≤n

i≤n

i≤n

The least squares estimate for σ can be taken as an initial value of the iteration procedure. Then,

exp(−xi /σn ) . µn = −σn log n−1

(4.2)

i≤n

• Moment(EV0): estimators of µ and σ are deduced from the sample mean and variance. From (1.34) and (1.35), conclude that µ + σλ and σ 2 π 2 /6 are the mean and the variance of G0,µ,σ , where λ again denotes Euler’s constant. Therefore, σn = 61/2 sn /π and µn = x ¯ − σn λ are the moment estimates of the location and scale parameters µ and σ in the Gumbel model, where x ¯ and s2n are the sample mean and variance again. If G0,µn ,σn strongly deviates from Fn , then the modeling of F m by Gumbel dfs G0,µ,σ is critical (or the estimates are inaccurate)! Likewise, one may compare the estimated density g0,µn ,σn with the kernel density fn,b for some choice of a bandwidth b.

4.1. Estimation in Extreme Value Models

109

Example 4.1.1. (Annual Floods of the Feather River.) We partially repeat the analysis of Benjamin and Cornell1 and Pericchi and Rodriguez–Iturbe2 about the annual ﬂoods of the Feather River in Oroville, California, from 1902 to 1960. The following ﬂood data are stored in the ﬁle ht–feath.dat. Table 4.1. Annual maximum discharges of Feather River in ft3 /sec from 1902 to 1960. year

ﬂood

year

ﬂood

year

ﬂood

year

ﬂood

year

ﬂood

1907 230,000 1943 108,000 1911 75,400 1916 42,400 1934 20,300 1956 203,000 1958 102,000 1919 65,900 1924 42,400 1937 19,200 1928 185,000 1903 102,000 1925 64,300 1902 42,000 1913 16,800 1938 185,000 1927

94,000

1921 62,300 1948 36,700 1949 16,800

1940 152,000 1951

92,100

1945 60,100 1922 36,400 1912 16,400

1909 140,000 1936

85,400

1952 59,200 1959 34,500 1908 16,300

1960 135,000 1941

84,200

1935 58,600 1910 31,000 1929 14,000

1906 128,000 1957

83,100

1926 55,700 1918 28,200 1955 13,000

1914 122,000 1915

81,400

1954 54,800 1944 24,900 1931 11,600

1904 118,000 1905

81,000

1946 54,400 1920 23,400 1933

8,860

1953 113,000 1917

80,400

1950 46,400 1932 22,600 1939

8,080

1942 110,000 1930

80,100

1947 45,600 1923 22,400

By applying the MLE(EV0), one obtains µn = 47, 309 and σn = 37, 309. The pertaining Gumbel distribution can be well ﬁtted to the upper part of the ﬂood data (according to the Q–Q plot, etc.). Therefore, this parametric approach may be employed to estimate T –year ﬂood levels (cf. (1.19)): the 50 and 100–year ﬂood levels are u(50) = 192, 887 and u(100) = 218, 937 ft3 /sec. Notice that the estimated 100–year ﬂood level was exceeded in the year 1907. The estimated Gumbel distribution has a remarkable 2.8% of its weight on the negative half–line. Yet, this does not heavily inﬂuence the estimation of parameters of the upper tail like T –year ﬂood levels (also see Example 5.2.1).

Pericchi and Rodriguez–Iturbe also select gamma (Pearson type III), log– gamma (log–Pearson type III) and log–normal models (cf. (4.6), (4.12) and (1.60)), yet there seems to be no clear conclusion which of these models is most preferable. 1

Benjamin, J.R. and Cornell, C.A. (1970). Probability, Statistics and Decisions for Civil Engineers. McGraw–Hill, New York. 2 Pericchi,

L.R. and Rodriguez–Iturbe, I. (1985). On the statistical analysis of ﬂoods. In: A Celebration of Statistics. The ISI Centenary Volume, A.C. Atkinson and S.E. Fienberg (eds.), 511–541.

110

4. Extreme Value Models

Moreover, these authors suggest to use excess dfs and hazard functions in ﬂood studies. In this context, these functions are called residual ﬂood df and ﬂood rate. The following Fr´echet and Weibull models can be deduced from the Gumbel model by means of the transformations T (x) = log(x) and T (x) = −1/x (cf. page 37). Thus, results and procedures (such as the MLE) for the Gumbel model can be made applicable to these models (and vice versa). Finally, we deal with estimators in the uniﬁed extreme value (EV) model.

The Fr´echet (EV1) Model We deal with another submodel of extreme value dfs. Recollect that the standard Fr´echet df with shape parameter α > 0 is given by G1,α (x) = exp(−x−α ) for x > 0. By adding a scale parameter σ, one gets the EV1 model EV1:

{G1,α,0,σ : α, σ > 0}.

Keep in mind that the left endpoint of G1,α,0,σ is always equal to zero. If all potential measurements are positive—e.g., due to physical reasons—and, in addition, a left endpoint equal to zero is acceptable, then it can be worthwhile to check the validity of the EV1 model. When applying the maximum likelihood principle for this model, one should make sure that the left endpoint of the actual df is larger than zero (at least this should hold true for the data).

The Weibull (EV2) Model The standard Weibull df with shape parameter α < 0 is given by G2,α (x) = exp(−(−x)−α ) for x ≤ 0. Recall from Section 1.3 that our parameterization for Weibull dfs diﬀers from the standard one used in the statistical literature, where a positive shape parameter is taken. In the following model, a scale parameter is included: EV2:

{G2,α,0,σ : α < 0, σ > 0}.

Notice that the upper endpoint of each of the dfs is equal to zero. For many data which may be regarded as minima, as, e.g., data concerning 2,α,0,σ (x) = 1 − G2,α,0,σ (−x) is a the strength of material, a converse Weibull df G plausible candidate of a distribution, also see (1.38) and (1.39).

The Uniﬁed Extreme Value Model The uniﬁed EV model—in the γ–parameterization—is the most important one for modeling maxima. By including scale and location parameters σ and µ, we obtain the model EV:

{Gγ,µ,σ : µ, γ real, σ > 0},

4.1. Estimation in Extreme Value Models

111

where Gγ are the standard versions as deﬁned on page 16. Occasionally, the extreme value (EV) model is called the generalized extreme value (abbreviated GEV) model in statistical references. The latter notion can be a bit confusing because this model only consists of extreme value distributions. Here is a list of estimation procedures. • MLE(EV): The MLE in the EV model must be numerically evaluated as a solution to the likelihood equations. The MLE determines a local maximum of the likelihood function if the iterated values remain in the region γ > −1. If γ varies in the region below −1, then neither a global nor a local maximum of the likelihood function exists, see R.L. Smith3 . • MDE(EV): Let d be a distance on the family of dfs. Then, (γn , µn , σn ) is an MDE (minimum distance estimator), if d(Fn , Gγn ,µn ,σn ) = inf d(Fn , Gγ,µ,σ ). γ,µ,σ

Likewise, an MDE may be based on distances between densities. This estimation principle is related to the visualization technique as dealt with in preceding sections. • LRSE(EV): This is a class of estimators that are linear combinations of ratios of spacings (RS’s) x[nq2 ]:n − x[nq1 ]:n , rˆ = x[nq1 ]:n − y[nq0 ]:n where q0 < q1 < q2 . Note that this statistic is independent of the location and scale parameters in distribution (in other words, rˆ is invariant under aﬃne transformations of the data). As a consequence of (2.38), rˆ ≈

−1 G−1 γ (q2 ) − Gγ (q1 )

−1 G−1 γ (q1 ) − Gγ (q0 )

=

− log q2 − log q0

−γ/2 ,

if q0 , q1 , q2 satisfy the equation (− log q1 )2 = (− log q2 )(− log q0 ). In this manner, one obtains the estimate γn = 2 log(ˆ r )/ log(log(q0 )/ log(q1 )) of γ. Such an estimate was suggested in [31]—attributed to S.D. Dubey—for estimating the shape parameter of Weibull distributions. 2

If q0 = q, q1 = q a , q2 = q a for some 0 < q, a < 1, then r )/ log(1/a). γn = log(ˆ 3 Smith,

(4.3)

R.L. (1985). Maximum likelihood estimation in a class of nonregular cases. Biometrika 72, 67–90.

112

4. Extreme Value Models The eﬃciency can be improved by taking a linear combination of such RSE’s where each of the single terms is deﬁned for q = i/n. The least squares method may be applied to obtain the additionally required estimators of the location and scale parameters µ and σ.

The L–moment estimators within EV models will be dealt with in Section 14.5 in the context of ﬂood frequency analysis.

Simulating the Mean Squared Error (MSE) Given an estimator γn and a df H, generate a set of estimates, say, γn,1 , . . . , γn,N , where N is the selected number of simulations. Our standard number of simulations is N = 4000. We simulate the MSE of estimators based on Gumbel data, maxima of m = 30 exponential data, and maxima of m = 30, 100 standard normal data (indicated by the dfs G0 , W 30 and Φm ) for sample sizes n = 20, 100, 500. Table 4.2. MSE of estimators γn of the shape parameter γ = 0 for block sizes m = 30, 100. MSE sample size n MLE(EV) LRSE(EV)

sample size n MLE(EV) LRSE(EV)

20 0.057 0.165

G0 100 0.006 0.022

20 0.086 0.156

Φ30 100 0.024 0.041

500 0.001 0.004

500 0.017 0.023

20 0.058 0.167

W030 100 0.006 0.023

500 0.001 0.004

20 0.081 0.163

Φ100 100 0.019 0.034

500 0.012 0.016

For the sample size n = 500, the MSE is close to the squared bias. Based on the γn,i one may also simulate the df or density of the estimator.

EV Q–Q Plots Recall from page 62 that the unknown shape parameter γ must be replaced by an estimator γn when a Q–Q plot is employed in the EV model. If there is a stronger deviation of the EV Q–Q plot from a straight line, then either the estimator of the shape parameter is inaccurate (perhaps try another one), or the EV model is untenable.

4.1. Estimation in Extreme Value Models

113

Example 4.1.2. (De Bilt September Data.) The de Bilt (September) data consist of 133 monthly maxima of temperature in de Bilt measured during the years 1849–1981. Thus, the background of the data suggests to use the EV model. These data are stored in the ﬁle em–dbilt.dat jointly with the maxima of other months and the annual maxima. The EV Q–Q plot (cf. Fig. 4.1 on the left–hand side) seems to conﬁrm the EV assumption. The maximum temperature within the whole period, measured in the year 1949, is equal to 34.2 degrees Celsius. The values of the MLE in the EV model are γ = −0.19, µ = 24.39 and σ = 2.76; the right endpoint of the estimated Weibull distribution is equal to 38.76. In Fig. 4.1, on the right–hand side, the kernel density (with Epanechnikov kernel and a bandwidth equal to 1.8) and the estimated Weibull density are displayed.

0.15

temperature

30

0.1 25

0.05 20

0.0 -2

-1

0

1

2

3

30

20 temperature

Fig. 4.1. (left.) EV Q–Q plot of the de Bilt (September) data with MLE(EV) γ = −0.19. (right.) A kernel density (dotted) and the Weibull density (solid) pertaining to the MLE(EV). When a least squares line and a two–sided moving average are displayed in a scatterplot window, there is no signiﬁcant trend visible in the data. There is some evidence of periods, yet we believe that this is negligible.

Notice that the estimated Weibull density in the preceding example is skewed to the right. We remark that the shapes of the estimated Weibull distributions vary from month to month. For example, the estimated Weibull density for the month May is skewed to the left4 .

Estimation of Parameters When a Trend Must be Dealt With Next, we admit a certain trend in the data yi that are measurements at time ti . Assume that yi is governed by an EV df Gγ,µ(ti ;β0 ,...,βp ),σ , where the location parameter depends on the time ti and further parameters β0 , . . . , βp . For example, 4 Also see [42] and Buishand, T.A. (1989). Statistics of extremes in climatology. Statist. Neerlandica 43, 1–30.

114

4. Extreme Value Models

the model is speciﬁed by the four parameters γ, β0 , β1 and σ, if µ(t; β0 , β1 ) = β0 + β1 t. The estimation in such a complex parametric model can be carried out by using the ML or MD estimation methods. A particular challenge is to theoretically evaluate the properties of such estimators and to implement such estimation procedures in a statistical software package. Subsequently, we handle this question in a more pragmatic way and suggest an estimation method that can be carried out in three steps: • estimate the trend in the data by the least squares method or in some nonparametric manner (without taking the EV model into account); • employ the preceding parametric estimators in the EV model to the residuals, • deduce estimators of γ, µ(ti ; β0 , . . . , βp ) and σ. This approach will be exempliﬁed in conjunction with the least squares method as introduced in Section 2.5. Let mn (i) be the least squares estimate based on y1 , . . . , yn of the mean of Gγ,µ(ti ;β0 ,...,βp ),σ as introduced in (2.43), where we assume that γ < 1 so that the mean exists. Next, assume that the residuals xi = yi − mn (i) are governed by an EV df Gγ,µ,σ , where µ is independent of i. Let γˆn , µ ˆn and σ ˆn be estimators of γ, µ and σ based on the residuals x1 , . . . , xn . We ˆn + mn (i) and σ ˆn as estimates of γ, µ(ui ; β0 , . . . , βp ) and σ in the propose γˆn , µ original model. Example 4.1.3. (Iceland Storm Data5 .) We report preliminary investigations concerning storm data for the years between 1912 and 1992, with the measurements from the years 1915 and 1939 missing (stored in em–storm.dat). The annual maxima resemble those of the storm data at Vancouver given in Table 1.1. Table 4.3. Iceland storm data. year annual maxima

1912

1913

1914

1916

···

1989

1990

1991

1992

38

69

47

53

···

60

68

89

63

In Fig. 4.2, the annual maxima are plotted against the years. One can recognize a slight, positive trend. The least squares line f (x) = 48.05 + 0.12(x − 1911) is added. A quadratic least squares line leads to a similar trend function so that the hypothesis of a linear trend seems to be justiﬁed. Firstly, by applying the MLE(EV) to the annual maxima in Table 4.3, we get the parameters α = −3.60, µ = 98.53 and σ = 50.59 (taken in the α–parameterization). Thus, the estimated Weibull distribution is nearly symmetric around 53. Recall that µ = 98.53 is also the upper endpoint of the distribution. 5 cf.

also Stoyan, D., Stoyan, H. and Jansen, U. (1997). Umweltstatistik. Teubner, Stuttgart.

4.1. Estimation in Extreme Value Models

115

maximum windspeed

90

70

50

Fig. 4.2. Scatterplot of storm data and linear least squares line.

30

1910

1930

1950

1970

1990

year

Secondly, we take the slight, positive trend in the data into account. The MLEs for the residuals (detrended data) are α = −3.09, µ = 38.85 and σ = 43.43. Thus, the estimated Weibull distribution is now slightly skewed to the left. By adding the values of the least squares line 48.05 + 0.12(x − 1911) for each of the years x, one can estimate the location parameter of the Weibull distribution for the year x by µ(x) = 86.90 + 0.12(x − 1911). The estimates for α and σ remain unchanged. Moreover, the estimated upper endpoints are equal to 86.90 and 96.62 for the years 1912 and 1992. We estimate the T –year thresholds with and without a linear trend hypothesis. In the latter case, equation (9.5) must be applied to Fk = Gα,µ(k),σ with α = −3.09, µ(k) = 97.1+0.12k and σ = 43.43, when the ﬁrst year is 1997. Upper bootstrap conﬁdence bounds are added. Table 4.4. Estimated T –year thresholds (initial year 1997) with 95% upper bootstrap conﬁdence bounds in brackets.

T without trend with trend

T –year thresholds u(T ) 50 100 200 81.41 (85.8) 84.42 (89.8) 86.9 (103.5) 95.47 (109.7) 107.17 (134.7) 89.02 (89.7)

As mentioned at the beginning, these investigations were of a preliminary nature. Although the analysis was carried out skillfully, according to the present state–of–the– art, the results are partly of a limited relevance due to the fact that the measurements do not directly concern wind speeds, but a certain index given by number of stations measuring at least 9 on the Beaufort scale × 100 . total number of stations

116

4. Extreme Value Models

Thus, the values in the 2nd column of Table 4.4 concern the annual maximum of such daily indices which are necessarily below 100. This implies that the estimated 200–year threshold and some of the conﬁdence bounds in Table 4.4 are nonsense (sorry!). If the estimation is carried out in the Weibull (EV2) model (without trend) with a ﬁxed upper endpoint equal to 100, then the estimated parameters are α = −3.72, µ = 100 and σ = 52.13. Again, T –year thresholds and pertaining upper bootstrap conﬁdence bounds may be calculated. Directions of the winds are also included in this data set.

This example shows that one has to work closely with people in applications in order to carry out a correct analysis. In conjunction with wind speeds it is of interest to include the direction of the wind speeds in the analysis for design assessment of large buildings and other structures6 . We also refer to the case studies by Zwiers7 and Ross8 ; we believe that the analysis of these wind–speed data would deserve particular attention, yet the full data set seems to be unavailable to the scientiﬁc community. The question of estimating a trend in the scale parameter of generalized Pareto (GP) dfs is dealt with in Section 5.1, page 139.

Asymptotic Distributions of Estimators and Conﬁdence Intervals in Extreme Value Models We specify the asymptotic normal distributions of the MLE(EV0) and deduce the asymptotic normality of the pertaining estimators of the T –year threshold by means of (11.6). Detailed explanations about multivariate normal distributions are postponed until Section 11.1. Asymptotic conﬁdence intervals can easily be established by replacing unknown parameters in covering probabilities by estimators, cf. Section 3.2. The MLEs µn and σn of the location and scale parameters µ and σ in the Gumbel EV0 model are jointly asymptotically normal with mean vector (µ, σ) and covariance matrix Σ/n, where ⎛ 6σ 2 ⎝ Σ= 2 π

π2 6

+ (1 − λ)2 (1 − λ)

(1 − λ)

⎞ ⎠

1

and λ is Euler’s constant. Let gT (µ, σ) = G−1 0,µ,σ (1 − 1/T ) = µ + σc(T ) denote the 6 Coles, S.G. and Walshaw, D. (1994). Directional modeling of extreme wind speeds. Appl. Statist. 43, 139–157. 7 Zwiers, F.W. (1995). An extreme–value analysis of wind speeds at ﬁve Canadian locations. In [21], pp. 124–134. 8 Ross,

W.H. (1995). A peaks–over–threshold analysis of extreme wind speeds. In [21], pp. 135–142.

4.1. Estimation in Extreme Value Models

117

T –year threshold, where c(T ) = − log(− log(1 − 1/T )). Because ∂gT ∂gT (µ, σ), (µ, σ) = (1, c(T )), D= ∂µ ∂σ we know that the pertaining estimator gT (µn , σn ) is asymptotically normal with mean gT (µ, σ) and variance DΣDt /n, where

DΣDt = σ 2 1 + 6(1 − λ + c(T ))2 /π 2 . (4.4) This is [24], 6.2.7, formula (2), in a paragraph written by B.F. Kimball. For a discussion of the asymptotic normality of the MLE(EV) we refer to the article by Smith cited on page 111 or [31], Chapters 20 and 21.

Minima As mentioned before, results for minima can be deduced from those for maxima. If x1 , . . . , xn may be regarded as minima, then the yi = −xi may be regarded as maxima. If the EV df Gi,α,µ,σ or Gγ,µ,σ can be ﬁtted to the yi , then the converse γ,−µ,σ , see (1.38) and (1.39), can be ﬁtted to the original data i,α,−µ,σ or G EV df G xi . Example 4.1.4. (Tensile Strength of Sheet Steel.) We partly repeat the statistical analysis in the book by D. Pfeifer9 concerning sheet steel with a cross–section of 20 × 0.7 mm2 . The tensile strength is measured as the elongation in % in a test according to DIN 50145. Table 4.5. Tensile strength of sheet steel (elongation in %). 35.9 36.5 36.9 37.2 37.2 37.3

37.3 37.3 37.8 37.8 38.1 38.3

38.7 38.8 38.9 38.9 39.0 39.3

39.4 39.9 40.3 40.4 40.5 40.5

40.5 40.8 40.8 41.1 41.1 41.1

41.2 41.2 41.2 41.3 41.5 41.5

41.5 41.6 41.7 41.9 42.2 42.2

42.3 42.4 42.5 42.6 42.7 42.7

42.8 42.9 43.0 43.7 44.3 44.9

45.0 46.7

From P–P plots, Pfeifer deduced a converse Weibull df with parameters α = −3.34, µ = 33.11 and σ = 8.38. Notice that µ = 33.11 is also the left endpoint of the distribution. The MLE(EV) gives the parameters α = −2.87, µ = 34.53 and σ = 6.84, which are comparable to the preceding ones. One may argue that there is no plausible explanation for a left endpoint not equal to zero. Therefore, we also applied the MLE in the EV2 model, where the left endpoint is ﬁxed and equal to zero. The estimates are α = −18.1, µ = 0 and σ = 41.7, and there is also a reasonable ﬁt to the data. The data are stored in gu–steel.dat. 9 Pfeifer,

D. (1989). Einf¨ uhrung in die Extremwertstatistik. Teubner, Stuttgart.

118

4. Extreme Value Models

Estimation of Actual Functional Parameters What do we estimate if the actual distribution is unequal yet close to an EV distribution? Let us return to our initial model, where the x1 , . . . , xn are generated under F m . Now, there is no one–to–one relationship between parameters and distributions and, therefore, parameters lose their operational meaning. There is a close relationship between our question and a corresponding one in the book [27] by Hampel et al., page 408: “What can actually be estimated?” There is a plain answer in our case: by estimating the parameters γ, µ and σ, we also estimate Gγ,µ,σ and, therefore, the actual df F m of the maximum, respectively, functional parameters of F m .

4.2

Testing within Extreme Value Models

We may continue the discussion of the previous lines by asking: what are we testing? We are primarily interested in the question whether the actual distribution of the maximum is suﬃciently close to an EV distribution so that the actual distribution can be replaced by an ideal one to facilitate the statistical inference. Therefore, the test should not be too stringent for larger sample sizes because, otherwise, small deviations from an EV df would be detected. Of course, one may also test the domain of attraction as it was done, e.g., in the paper by Castillo et al.10 Accepting the null–hypothesis does not necessarily mean that the actual distribution is closer to one of the speciﬁc EV distributions in the null–hypothesis.

Likelihood Ratio (LR) Test for the Gumbel (EV0) Model Within the EV model, we are testing H0 : γ = 0

against H1 : γ = 0

(4.5)

with unknown location and scale parameters. Thus, the Gumbel distributions are tested against other EV distributions for a given vector x = (x1 , . . . , xn ) of data. The likelihood ratio (LR) statistic is ˆ ,ˆ µ,ˆ σ (xi ) i≤n gγ TLR (x) = 2 log µ,˜ σ (xi ) i≤n g0,˜ with (ˆ γ, µ ˆ, σ ˆ ) and (˜ µ, σ ˜ ) denoting the MLEs in the EV and EV0 models. Because the parameter sets have dimensions 3 and 2, we know that the LR–statistic is 10 Castillo,

E., Galambos, J. and Sarabia, J.M. (1989). The selection of the domain of attraction of extreme value distribution from the set of data. In [14], pp. 181–190.

4.2. Testing within Extreme Value Models

119

asymptotically distributed according to the χ2 –df χ21 with 1 degree of freedom under the null–hypothesis. Consequently, the p–value is pLR (x) = 1 − χ21 (TLR (x)). The signiﬁcance level is attained with a higher accuracy by employing the Bartlett correction11 when the LR–statistic TLR is replaced by TLR /(1 + 2.8/n). In this case the p–value is

p(x) = 1 − χ21 TLR (x)/(1 + 2.8/n) . There is a general device to replace an LR–statistic TLR by TLR /(1 + b/n) to achieve a higher accuracy in the χ2 –approximation12.

A Test–Statistic Suggested by LAN–Theory Marohn13 applies the LAN–approach to deduce a test statistic for the testing problem (4.5). Let v1,µ,σ (x) v2,µ,σ (x) v3,µ,σ (x)

= = =

2

−(x − µ)/σ + ((x − µ)/σ) (1 − exp (−(x − µ)/σ)) /2, −1/σ + ((x − µ)/σ) (1 − exp (−(x − µ)/σ)) /σ, (1 + exp (−(x − µ)/σ))/σ .

The test–statistic can be approximately represented by

v1,µ,σ (xi ) − σ × 0.5066 v2,µ,σ (xi ) Tn,µ,σ (x) = 1.6449 i≤n

i≤n

v3,µ,σ (xi ) (n1/2 3.451). − σ × 0.8916 i≤n

The p–value is p(x) = 2Φ(Tn,ˆµ(x),ˆσ (x) (x)/0.69) − 1, where µ ˆ(x) and σ ˆ (x) are the MLEs of µ and σ.

Other Test Procedures In those cases where the null–hypothesis is a location and scale parameter family it is desirable to use a test statistic that is invariant under location and scale parameters. This condition is satisﬁed by the sample skewness coeﬃcient (see (2.7)). 11

Hosking, J.R.M. (1984). Testing whether the shape is zero in the generalized extreme– value distribution. Biometrika 71, 367–374. 12 See, e.g, Barndorﬀ–Nielsen, O.E. and Cox, D.R. (1994). Inference and Asymptotics. Chapmann & Hall, London. 13 Marohn,

F. (2000). Testing extreme value models. Extremes 3, 362–384.

120

4. Extreme Value Models

Tests based on the sample skewness coeﬃcient are well known in the statistical literature. It is evident that the null–hypothesis of a Gumbel distribution is accepted for those distributions with skewness parameter close to 1.14, cf. page 21. For tests based on spacings (diﬀerences of order statistics) we refer to Otten and van Montfort14 . Goodness–of–ﬁt tests for the Gumbel or EV model are obtained by χ2 – test statistics as mentioned in Section 3.3. A class of goodness–of–ﬁt tests for the Gumbel model was investigated by Stephens15 . Test statistics of the form

2 are utilized, where Fn is the sample df and F is the i≤n F (xi ) − Fn (xi ) Gumbel df with unknown parameters replaced by MLEs.

4.3

Extended Extreme Value Models and Related Models

We present several distributions, such as Wakeby, two–component extreme value and gamma distributions (also see [4], a book about the gamma and related distributions), which are also used for the modeling of maxima.

A Wakeby Construction Distributions with a certain tail behavior may also be designed by using qfs. Note that every real–valued, nondecreasing and left continuous function on the interval (0, 1) deﬁnes a qf. Therefore,

Q(q) = a 1 − (1 − q)b + c − 1 + (1 − q)−d + e, 0 0, is a qf. We see that the left and right tails of the distribution are related to those of a beta and, respectively, a Pareto distribution16 .

Two–Component Extreme Value Distributions In cases where one observes a seasonal variation in the data, it is advisable to apply a seasonal separation to obtain identically distributed data. This was done 14 Otten,

A. and van Montfort, M.A.J. (1978). The power of two tests on the type of the distributions of extremes. J. Hydrology 37, 195–199. 15 Stephens,

M.A. (1977). Goodness of ﬁt for the extreme value distribution. Biometrika

64, 583–588. 16 Houghton, J.C. (1978). Birth of a parent: The Wakeby distribution for modeling ﬂows. Water Resour. Res. 14, 1105–1110, and Hosking, J.R.M., Wallis, J.R. and Wood, E.F. (1985). An appraisal of the regional ﬂood frequency procedure in the UK Flood Studies Report. Hydrol. Sci. J. 30, 85–109.

4.3. Extended Extreme Value Models and Related Models

121

by Todorovic and Rousselle17 for ﬂood data (in addition see [42] and Davison and Smith18 ). Then, the annual maximum can be regarded as the maximum of, e.g., monthly or certain seasonal maxima. Subsequently, we merely deal with two– component distributions. Then, the modeling by means of the product G1 (x)G2 (x) of two EV dfs is adequate (called two–component EV distribution). Such a modeling can also be used in conjunction with mixture distributions. Before going into details we present an example of tropical and non–tropical wind speeds (a data set of a similar type, without a classiﬁcation of extraordinarily large data, consists of the annual ﬂoods of the Blackstone River in Woonsocket, Rhode Island, from 1929 to 1965 (stored in the ﬁle ht–black.dat)). Example 4.3.1. (Annual Maximum Wind Speeds for Jacksonville, Florida.) The data in Table 4.6 (stored in the ﬁle em–jwind.dat) were recorded by M.J. Changery19 and further discussed in [34]. By reviewing weather maps for the days on which the annual maxima occurred, Changery identiﬁed storms of two types, namely tropical and non–tropical. Table 4.6. Annual maximum wind speeds (in mph) from 1950 to 1979 with tropical storms indicated by T. year mph type year mph type year mph type year mph type year mph type 1950

65

T

1956

44

1962

49

1968

47

1951

38

T

1957

42

1963

56

1969

1952

51

1958

38

1964

74

T

1953

47

1959

34

1965

52

T

1954

42

1960

42

1966

44

T

1955

42

1961

44

1967

69

T

T

1974

48

53

1975

68

1970

40

1976

46

1971

51

1977

36

1972

48

1978

43

1973

53

1979

37

T

A preliminary statistical analysis is carried out separately for the two subsamples. A Gumbel modeling can be acceptable for both subsamples. The MLE(EV0) is (µ, σ) = (43.6, 6.7) for the tropical and (µ, σ) = (44.1, 9.0) for the non–tropical data. For a continuation see Example 6.1.2.

Tropical and non–tropical winds are selected at random by nature so that a modeling of a daily maximum wind speed by means of a mixture distribution is 17 Todorovic, P. and Rousselle, J. (1971). Some problems of ﬂood analysis. Water Resour. Res. 7, 1144–1150 18 Davison, A.C. and Smith, R.L. (1990). Models for exceedances over high thresholds. J. R. Statist. Soc. B 52, 393–442. 19 Changery,

M.J. (1982). Historical extreme winds for the United States—Atlantic and Gulf of Mexico coastlines. U.S. Nuclear Regulatory Commission, NUREG/CR–2639.

122

4. Extreme Value Models

adequate. Next, we follow the line of arguments by Rossi et al.20 which suggests a modeling of the annual maximum by means of a two–component EV distribution. Assume that X1 , . . . , XN (1) and Y1 , . . . , YN (2) are maxima over a certain threshold. Assume that the Xi and Yi are distributed according to F1 and F2 . Under independence conditions and the condition that N (1) and N (2) are Poisson random variables one can verify (e.g., using the superposition of two Poisson processes) that both sequences can be jointly modeled by a sequence Z1 , . . . , ZN , where N is a Poisson random variable with parameter λ = λ1 + λ2 and the Zi have the common mixture distribution F (x) = p1 F1 (x) + p2 F2 (x) with p1 = λ1 /λ and p2 = λ2 /λ. According to (1.54), the maximum of the Zi has the df

exp − λ(1 − F (x)) = exp − λ1 (1 − F1 (x)) exp − λ2 (1 − F2 (x)) for x ≥ 0. This df is close to a two–component EV distribution if λ1 , λ2 are small and F1 , F2 are close to GP dfs. Presently, we do not have direct access to statistical inference in the two– component EV model (beyond a visual one). Some further consideration will be made in Section 6.1, where the identiﬁcation of the single components will be reconsidered within the framework of censored data.

Gamma (Pearson–Type III) and χ2 Distributions The gamma (Pearson–type III) distribution with shape parameter r > 0 was already introduced in (3.42) as a prior for a Bayesian estimation procedure. Gamma distributions may also be employed as mixing distributions in various cases and for the direct modeling of distributions of actual maxima. The density of the standard gamma distribution with shape parameter r > 0 is Gamma:

hr (x) =

1 r−1 −x e , Γ(r) x

x > 0.

(4.6)

The exponential density is a special case for r = 1. From the relation Γ(r + 1) = rΓ(r), it follows that the mean and variance of the gamma distribution are both equal to r. Gamma dfs Hr are sum–reproductive in so far as the convolution is of the same type: we have Hrm∗ = Hmr . Generally, the sum of m independent gamma random variables with parameters ri is a gamma random variable with parameter r1 + · · · + rm . It is apparent that gamma dfs approach the normal df as r → ∞. For positive integers r = n + 1, one obtains the distribution of the sum of n + 1 iid exponential random variables Xi . In this case, the gamma df can be written Hn+1 (x) = 1 − exp(−x)

n

xi i=0

20 Rossi,

i!

,

x > 0.

(4.7)

F., Fiorenti, M. and Versace, P. (1984). Two–component extreme value distribution for ﬂood frequency analysis. Water Resour. Res. 20, 847–856.

4.3. Extended Extreme Value Models and Related Models

123

The gamma df is also called the Erlang df in this special case. It is noteworthy that χ2 –distributions with n degrees of freedom are gamma distributions with shape and scale parameters r = n/2 and σ = 2. If X1 , . . . , Xn are iid standard normal random variables, then i≤n Xi2 is a χ2 random variable with n degrees of freedom.

Logistic Distributions as Mixtures of Gumbel Distributions If {Fϑ } is a family of dfs and h is a probability density, then Fh (x) = Fϑ (x)h(ϑ) dϑ

(4.8)

is another df (the mixture of the dfs Fϑ with respect to h). If fϑ is the density of Fϑ , then fh (x) = fϑ (x)h(ϑ) dϑ is the density of Fh . We refer to Section 8.1 for a detailed discussion of the heuristics behind the concept of mixing. We show that a certain mixture of Gumbel distributions is a generalized logistic distribution, if the mixing is done with respect to a gamma distribution (a result due to Dubey21 ). Therefore, the generalized logistic model can be an appropriate model for distributions of maxima in heterogeneous populations. Likewise, one may deal with minima. A Gumbel df with location and scale parameters µ and σ > 0 can be reparameterized by G0,µ,σ (x)

= exp(− exp(−(x − µ)/σ)) = exp(−ϑ exp(−x/σ)),

where ϑ = exp(µ/σ). Mixing over the parameter ϑ with respect to the gamma density hr,β , with shape and scale parameters r, β > 0, one obtains the mixture df ∞ Fβ,r,σ (x) = exp(−ϑ exp(−x/σ))hr,β (ϑ) dϑ 0

=

(1 + β exp(−x/σ))−r

(4.9)

which is a generalized logistic df with two shape parameters β, r > 0 and the scale parameter σ > 0. If r = 1 and β = 1 and, thus, the mixing is done with respect to the standard exponential df, then the mixture is a logistic df F1,1,σ (x) = (1 + exp(−x/σ))−1 21 Dubey,

(4.10)

S.D. (1969). A new derivation of the logistic distribution. Nav. Res. Logist. Quart. 16, 37–40.

124

4. Extreme Value Models

with scale parameter σ > 0. 0,µ,σ (x) = 1 − G0,µ,σ (−x) If the Gumbel df is replaced by the Gompertz df G and ϑ = exp(−µ/σ), then the mixture is the converse generalized logistic df F β,r,σ (x) = 1 − (1 + β exp(x/σ))−r .

(4.11)

If β = 1/r, then the Gumbel df G0,0,σ and, respectively, the Gompertz df G0,0,σ are the limits of the (converse) generalized logistic dfs in (4.9) and (4.11) as r → ∞.

Log–Gamma (Log–Pearson–Type III) and GP–Gamma Distributions If log(X) has the gamma density hr (x/σ)/σ for some scale parameter σ > 0, then X has the density Log–Gamma:

f1,r,α (x) =

αr r−1 −(1+α) x , Γ(r) (log x)

x > 1,

(4.12)

for α = 1/σ. We see that the log–gamma distribution has two shape parameters r, α > 0. For r = 1, one obtains the standard Pareto density with shape parameter α.

r = 0.5 1

0.5

r=1

Fig. 4.3. Log–gamma densities for α = 1 and r = 0.5, 1, 1.5.

r = 1.5 0 1

2

3

4

Figure 4.3 indicates that log–gamma distributions have upper tails similar to those of Pareto (GP1) distributions, yet the shape can be completely diﬀerent near the left endpoint. In addition, if X is a log–gamma random variable, then −1/X has the density GP–Gamma 2:

f2,r,α (x) =

|α|r r−1 (−x)−(1+α) , Γ(r) (− log |x|)

−1 < x < 0,

for parameters α < 0, where we again changed the sign of the shape parameter. The standard beta (GP2) densities are special cases for r = 1. Within this system, the gamma density may be denoted by f0,r . The following diagram shows the relationships between the diﬀerent models.

4.3. Extended Extreme Value Models and Related Models

log(X)

Gamma Exponential (GP0)

125

Log–Gamma Pareto (GP1)

6 −1/X ? GP–Gamma 2 Beta (GP2)

A uniﬁed model is achieved by using the von Mises approach. For r > 0 and γ = 0, we have r−1 log(1+γx) 1 (1 + γx)−(1+1/γ) GP–Gamma: fr,γ (x) = Γ(r) γ for 0 < x, if γ > 0, and 0 < x < 1/|γ|, if γ < 0. The gamma densities fr,0 are obtained in the limit as γ → 0.

Fitting Gamma and Log–Gamma Distributions to Maxima If r < 1 and γ < −1, then GP–gamma densities have a pole at zero and a monotonic decrease. Thus, due to the second property, there is a certain similarity to GP densities. If r > 1, there is a greater similarity to EV densities: • gamma densities have an exponential type upper tail and are tied down near zero by means of a factor xr−1 , • log–gamma densities with location parameter µ = −1 have a Pareto type upper tail and are tied down near zero by (log(1 + x))r−1 ≈ xr−1 . Therefore, gamma and log–gamma densities have shapes that correspond visually to Fr´echet densities if r > 1. A further extension of the preceding models is achieved if we start with generalized gamma instead of gamma distributions; e.g., logarithmic half–normal distributions are included in such models. Yet, in the subsequent lines we deal with a diﬀerent kind of extensions starting with converse gamma and converse generalized gamma distributions.

Generalized Gamma Distributions If X is a gamma random variable with parameter r > 0, then X 1/β is a generalized gamma random variable with density ˜ r,β (x) = h

β βr−1 x exp(−xβ ), Γ(r)

x ≥ 0,

126

4. Extreme Value Models

for β > 0. This transformation corresponds to that on page 38, where Weibull (EV2) dfs were deduced from converse exponential dfs. We see that the generalized gamma model includes the converse Weibull model (for r = 1). For β = 2 and r = 1/2 we have the half–normal distribution. The normal distribution is included if we also take double generalized gamma ˜ r,β (|x|)/2. distributions with densities of the form h

EV–Gamma Distributions We indicate certain extensions of EV models by a diagram with transformations as in the EV family.

−(−X)−1/α

Converse Gamma

-

Converse Exponential

Converse Generalized Gamma Weibull (EV2)

6

−1/X

? EV–Gamma 0

log(X)

Gumbel (EV0)

EV–Gamma 1 Fr´echet (EV1)

Within the EV–Gamma 1 model one obtains the L´evy distribution (cf. (6.18)) which is a sum–stable density with index 1/2 and a certain skewness parameter. A von Mises representation is again possible. The applicability of such models must be still explored.

The Two–Parameter Beta Family We mention also the beta distributions in the usual parameterization that are given by xa−1 (1 − x)b−1 , 0 ≤ x ≤ 1, (4.13) fa,b (x) = B(a, b) for shape parameters a, b > 0, where B(a, b) = 0

1

xa−1 (1 − x)b−1 dx

is the beta function. Notice that the beta densities in the GP2 model constitute a special case; we have w1,α,1,1 = f1,−α . Recall that B(a, b) = Γ(a)Γ(b)/Γ(a + b), where Γ is the gamma function.

Chapter 5

Generalized Pareto Models This chapter deals once again with the central topic of this book, namely with exceedances (in other words, peak–over–threshold values) over high thresholds and upper order statistics. One may argue that this chapter is richer and more exciting than the preceding one concerning maxima. The role of extreme value (EV) dfs is played by generalized Pareto (GP) dfs.

5.1

Estimation in Generalized Pareto Models

Let x1 , . . . , xn be the original data which are governed by a df F . We deal with upper extremes which are either • the exceedances y1 , . . . , yk over a ﬁxed threshold u, or • the k upper ordered values {y1 , . . . , yk } = {xn−k+1:n , . . . , xn:n }, where k is ﬁxed. Recollect from (2.4) that a nonparametric estimate of the exceedance df F [u] is given by the sample df Fk = Fk (y; ·) based on the exceedances y1 , . . . , yk over u. Likewise, the exceedance density or qf can be estimated by means of a sample exceedance density fk or the sample exceedance qf Fk−1 . Now we want to pursue a parametric approach. We assume that the actual exceedance df F [u] can be replaced by some GP df W with left endpoint u. For example, we estimate the exceedance df F [u] by means of a GP df Wγk ,u,σk (in the γ–representation), where γk and σk are estimates of the shape and scale parameters. It is advisable to add the threshold u to the sample when a parametric estimation based on exceedances is executed. We also deal with likelihood–based estimator, namely MLEs and Bayesian estimators, based on exceedances. For that purpose, exceedances are dealt with like iid data. A justiﬁcation for this approach can be found in Section 8.1, page 234.

128

5. Generalized Pareto Models

Recall that the threshold value u is replaced by xn−k:n in the case of upper ordered values. Another random threshold is obtained for a data–driven choice of k, see page 137.

The Exponential Model GP0(u) The statistical model for the exceedances over the threshold u consists of all exponential dfs with left endpoint u. {W0,u,σ : σ > 0}.

GP0(u):

Estimators for the GP0(u) model: • MLE(GP0): the MLE of the scale parameter is σk = apparent that the MLE is also a moment estimator.

1 k

i≤k (yi

− u). It is

• M–Estimator (GP0): an M–estimate of the scale parameter σ, which may be regarded as a robustiﬁed MLE (see (3.7)), is obtained as the solution to

i≤k

y − u b i − = 0. exp − σb 1+b

For b → ∞, the likelihood equation is attained. We refer to Section 3.5 for Bayesian estimators in the exponential model. Example 5.1.1. (Continuation of Example 4.1.1 about the Annual Floods of the Feather River.) According to the insight gained from Example 4.1.1, we may already expect that an exponential distribution can be ﬁtted to the upper part of the annual maximum ﬂood (which is indeed conﬁrmed). From the MLE(GP0) with k = 25, we get the exponential distribution with location and scale parameters µk = 36, 577 and σk = 45, 212. The 50 and 100–year ﬂood levels are u(50) = 213, 450 and u(100) = 244, 789. We see that the 100–year ﬂood level is exceeded by none of the 59 annual maximum discharges.

If one is not sure whether the exponential model is acceptable, one should alternatively carry out the estimation within the Pareto model or the uniﬁed generalized Pareto model which are handled below.

The Restricted Pareto Model GP1(u, µ = 0) This is just the exponential model GP0(u) transformed by T (x) = log x (as outlined on page 37). Therefore, the estimators correspond to those in the exponential model. We consider a one–dimensional Pareto model parameterized by the shape parameter α, namely, GP1(u, µ = 0):

{W1,α,0,u : α > 0}.

5.1. Estimation in Generalized Pareto Models

129

This is an appropriate model for exceedances over the threshold u because the left endpoints of these Pareto dfs are equal to u. The shape parameter α can be represented as a functional parameter because log(x/u) dW1,α,0,u (x) = 1/α . (5.1) Estimators of the shape parameter α within the model GP1(u, µ = 0): • Hill1 : this is the in the restricted Pareto model GP1(u, µ = 0). We have

αk = k log(yi /u). (5.2) i≤k

Recall that the threshold u is replaced by xn−k:n in the case of upper ordered values. Then, the estimate can be written

log(xn−i+1:n /xn−k:n ) (5.3) αk = k i≤k

which is the Hill estimator in the original form. The Hill estimator may be introduced as a sample functional log(x/u) dFk (x) , αk = 1 where Fk is the sample exceedance df (replacing W1,α,0,u in equation (5.1)). For a discussion about the performance of the Hill estimator we refer to the subsequent page and the lines around the Figures 5.1 and 5.2. • M–Estimator in the restricted Pareto model GP1(u, µ = 0): the estimate2 of the shape parameter α that corresponds to the M–estimate of σ in the GP0 model is the solution to

yi −α/b b − = 0. u 1+b i≤k

For b → ∞, the Hill estimate is received. • Bayes estimators for the model GP1(u, µ = 0)3 : take the gamma density p(α) = hs,d (α),

(5.4)

1 Hill, B.M. (1975). A simple general approach to inference about the tail of a distribution. Ann. Statist. 3, 1163–1174. 2 Reiss, R.–D., Haßmann, S. and Thomas, M. (1994). X R MES: Extreme value analysis T E and robustness. In [15], Vol. 1, 175–187.

references are Hill1 and Rytgaard, M. (1990). Estimation in the Pareto distribution. ASTIN Bulletin 20, 201–216. 3 Early

130

5. Generalized Pareto Models cf. (3.42), as a prior for the shape parameter α. This Bayes estimator corresponds to the one in the exponential model with unknown reciprocal scale parameter, see page 102. The likelihood function satisﬁes

L(y|α) ∝ αk exp − α log(yi /u) , yi > u, (5.5) i≤k

in α. Consequently, the posterior density satisﬁes p(α|y) ∝ L(y|α)hs,d (α), and one obtains (5.6) p(α|y) = hs ,d (α) for the posterior density which is the gamma density with parameters s = s + k and d = d + i≤k log(yi /u). The Bayes estimate, as the mean of the posterior density, is ∗ αp(α|y) dα αk (y) = =

d+

s+k . i≤k log(yi /u)

(5.7)

We see that the Bayes estimate is close to the Hill estimate if s and d are small or/and k is large. The explicit representation of the Hill and the Bayes estimators facilitated the development of an asymptotic theory. In addition, these estimators possess an excellent performance if this one–dimensional model is adequate. Supposedly, to check the performance of these estimators, simulations were usually run under standard Pareto distributions with location parameter µ = 0. Also, the Hill estimator has been applied to data in a lot of research papers. Yet, this does not necessarily imply that the Hill estimator and related estimators should be used in applications. We refer to the comments around Figures 5.1 and 5.2 for a continuation of this discussion. What should be done if the diagnostic tools—like the sample mean or median excess function—in Chapter 2 indicate that the GP1(u, µ = 0) model is signiﬁcantly incorrect, as, e.g., in the case of ﬁnancial data in Chapter 16. It is likely that one of these estimators was applied because a heavy–tailed or, speciﬁcally, a Pareto–like tail of the underlying df was conjectured. It suggests itself to carry out the statistical inference within the full model GP1(u) of Pareto dfs with left endpoint u which are introduced in the next subsection. For dfs in the full Pareto GP1(u) model we have W1,α,µ,σ = W1,α,µ,u−µ ≈ W1,α,0,u ,

(5.8)

if u is suﬃciently large. Therefore, estimators especially tailored for the submodel GP1(u, µ = 0) are of a certain relevance for the full Pareto model GP1(u) in

5.1. Estimation in Generalized Pareto Models

131

asymptotic considerations. Yet, for ﬁnite sample sizes the approximation error in (5.8) may cause a larger bias and, thus, an unfavorable performance of the estimator. Also see Section 6.5, where theoretical results are indicated that the approximation error is of a smaller order for small shape parameters α.

The Full Pareto GP1(u) Model: (α, µ, σ)–Parameterization The model of all Pareto dfs (in the α–parameterization) with shape parameter α > 0 and left endpoint u is given by {W1,α,µ,σ : α, σ > 0, µ real, µ + σ = u}.

GP1(u):

It is apparent that the restricted Pareto model GP1(u, µ = 0) is a submodel of the model GP1(u) with µ = 0. The MLE in the GP1(u) model corresponds to the MLE in the generalized Pareto model and does not exist in the present Pareto model with a certain positive probability.

The Full Pareto GP1(u) Model: (α, η)–Parameterization The GP1(u) model can be parameterized by two parameters α, η > 0. For every df W1,α,µ,σ with µ + σ = u, W1,α,µ,σ (x)

= = =

W1,α,µ,u−µ W1,α,u(1−η),uη (x) −α (x − u)/u , 1− 1+ η

x ≥ u,

(5.9)

where η = 1 − µ/u has the nice property of being a scale parameter for the normalized excesses (x − u)/u. One obtains a reparameterized full Pareto model (for exceedances over u) (α, η)–parameterization:

{W1,α,u(1−η),uη : α, η > 0}.

(5.10)

In this representation, the restricted Pareto model GP1(u, µ = 0) is a submodel with η = 1. Within the reparameterized model of Pareto dfs one gets some closer insight why the Hill estimator, and related estimators such as the Bayes estimator in (5.7), are inaccurate even in such cases where a Paretian modeling is acceptable. Notice that a larger scale parameter η puts more weight on the upper tail of the df. If such a Pareto df is estimated, yet η = 1 is kept ﬁxed in the modeling, then the heavier weight in the tail, due to a larger parameter η, must be compensated by a smaller estimated shape parameter α.

132

5. Generalized Pareto Models

In the following illustration, we show simulated densities of the Hill estimator based on k = 45 largest Pareto data out of n = 400. The number of simulations is N = 4000. Whereas the shape and scale parameters are kept ﬁxed, we vary the location parameter of the underlying Pareto distribution. As expected, the density of the Hill estimator of α is nicely centered around the true shape parameter α = 10 if µ = 0 because the underlying df belongs to the restricted Pareto model GP1(u, µ = 0).

1

Fig. 5.1. Simulated densities of Hill estimator under the Pareto distributions with shape parameter α = 10, σ = 1 and µ = −1, 0, 1 from left to right.

0.5

0.0 2

4

6

8

10 12 14 16 18 20 22

The Hill estimator has a bad performance for the other cases (for a continuation see Fig. 5.2); e.g., for µ = −1 it centers around a value 3.

Bayes Estimation in the Full Pareto Model, (α, η)–Parameterization Bayes estimators for the model GP1(u), in the (α, η)–parameterization, were dealt with by Reiss and Thomas4 . For a more recent article see Diebolt et al.5 As a prior density take p(α, η) = hs,d (α)f (η),

(5.11)

where hs,d is a gamma density taken as a prior for α, and f , as a prior for η, is another probability density which will be speciﬁed later. The likelihood function for the present model is determined by

yi − u , yi > u. (5.12) log 1 + L(y|α, η) ∝ (α/η)k exp − (1 + α) ηu i≤k

4 Reiss,

R.-D. and Thomas, M. (1999). A new class of Bayesian estimators in Paretian excess–of–loss reinsurance. ASTIN Bulletin 29, 339–349. 5 Diebolt,

J., El–Aroui, M.–A., Garrido, M. and Girard, S. (2005). Quasi–conjugate Bayes estimates for GPD parameters and application to heavy tails modelling. Extremes 8, 57–78.

5.1. Estimation in Generalized Pareto Models

133

Deduce the posterior density p(α, η|y) = hs ,d (η) (α)f˜(η),

(5.13)

where hs ,d (η) is again a gamma density with parameters s = s + k and d (η) = d + Σi≤k log(1 + (yi − u)/(ηu)). The probability density f˜ is characterized by

yi − u f (η). f˜(η) ∝ η −k (d (η))−s exp − log 1 + ηu

(5.14)

i≤k

Simple calculations yield that the Bayes estimates of α and η are s ˜ ∗ f (η) dη, αk (y) = αp(α, η|y) dαdη = d (η)

and ηk∗ (y)

=

(5.15)

ηp(α, η|y) dαdη =

η f˜(η) dη.

(5.16)

We see that the Bayesian estimator of α is just the estimator in (5.7), if the prior distribution—and, thus, also the posterior—is a point measure with mass equal to one at σ = 1. We remark that gamma priors were chosen for the parameter α in the restricted model because they possess the nice property of being conjugate priors. This property still holds in the full model in so far that the conditional posterior for α is again a gamma distribution. Such a natural choice seems not to exist for the scale parameter σ. As priors for η one may also take, e.g., reciprocal gamma distributions as introduced in (3.43). For a continuation see Section 8.3. If the Pareto modeling is not adequate for the actual fat or heavy–tailed df, then one may choose one of the models introduced in Section 5.5.

The Beta Model (GP2) We shortly mention the model of beta (GP2) distributions with upper endpoint equal to zero and scale parameter u. The left endpoint of the distribution is −u. Recall from Section 1.4 that these distributions form a submodel of the family of beta distributions as dealt with in the statistical literature. In addition, a negative shape parameter is taken. GP2(u):

{W2,α,0,u : α < 0}.

The GP1 model can be transformed to the GP2 model by means of the transformation T (x) = −1/x (cf. page 37 again). Thus, an MLE corresponding to the Hill estimator in the GP1 model, therefore called Hill(GP2) estimator, becomes applicable. Shift the data below zero if an upper endpoint other than zero is plausible.

134

5. Generalized Pareto Models

The Generalized Pareto Model The given model is GP(u):

{Wγ,u,σ : γ real, σ > 0},

where u and σ are the location and scale parameters. Notice that the Pareto df W1,α,µ,u−µ in (5.8) is equal to Wγ,u,σ with σ = γ(u − µ). Estimators γk of γ include: • MLE(GP): the MLE in the GP model must be evaluated by an iteration procedure6 . The remarks about the MLE(EV) also apply to the present estimator. • Moment(GP): the moment estimator7 takes the form γ1,k + γ2,k , where the Hill estimator. γ1,k = 1/αk is the reciprocal of The second term γ2,k is constructed by means of lj,k = i≤k (log(yi /u))j k for j = 1, 2. We have

2 γ2,k = 1 − 1/ 2 1 − l1,k /l2,k . Roughly speaking, γ1,k (respectively, γ2,k ) estimates the shape parameter γ if γ ≥ 0 (if γ ≤ 0) and γ1,k (respectively, γ2,k ) is close to zero if γ ≤ 0 (if γ ≥ 0). Warning! The moment estimator has an excellent performance in general, yet it should not be applied to a full data set of exceedances. In that case, one obtains irregular estimates. • Drees–Pickands(GP): an LRSE of the shape parameter γ in the GP model can be deﬁned in similarity to that in the EV model, cf. page 111. Let γk = log(ˆ r )/ log(1/a) with q0 = 1 − q, q1 = 1 − aq and q3 = 1 − a2 q, where 0 < q, a < 1. By taking q = 4i/k and a = 1/2, one obtains the Pickands8 estimate, which corresponds to a Dubey estimate (cf. page 111) in the EV model9 . We have yk−i:k − yk−2i:k log 2 γk,i = log yk−2i:k − yk−4i:k 6 Prescott, P. and Walden, A.T. (1980). Maximum likelihood estimation of the parameters of the generalized extreme–value distribution. Biometrika 67, 723–724. 7 Dekkers, A.L.M., Einmahl, J.H.J. and de Haan, L. (1989). A moment estimator for the index of an extreme–value distribution. Ann. Statist. 17, 1833–1855. 8 Pickands,

J. (1975). Statistical inference using extreme order statistics. Ann. Statist.

3, 119–131. 9A

closely related estimator may be found in the article by Weiss (1971). Asymptotic inference about a density function at an end of its range. Nav. Res. Logist. Quart. 18, 111–114.

5.1. Estimation in Generalized Pareto Models

135

for i ≤ [k/4]. A linear combination i≤[k/4] ck,i γk,i with estimated optimal scores ck,i was studied by H. Drees10 . Estimates of γ based on two and, respectively, ﬁve Pickands estimates were dealt with by M. Falk11 and T.T. Pereira12. • Slope(GP): the slope β1,k of the least squares line (see (2.40)), ﬁtted to the mean excess function right of the k largest observations, is close to γ/(1 − γ) and, therefore, γk = β1,k /(1 + β1,k ) is a plausible estimate of γ. • L–Moment Approach: This method will be introduced in Section 14.4 in conjunction with ﬂood frequency analysis. In addition, σ may be estimated by a least squares estimator σk (a solution to (2.40) for µ = u with Φ replaced by Wγk ), where γk is the Moment, Drees–Pickands or slope estimator. If γ > −1/2, then one should apply the MLE(GP) or Moment(GP). The Drees–Pickands estimator possesses remarkable asymptotic properties, yet the ﬁnite sample size performance can be bad for γ > 0. Yet, we believe that the concept of LRSEs has also the potential to provide accurate estimators for smaller sample sizes in such cases. In addition, estimators of that type can be especially tailored such that certain additional requirements are fulﬁlled. The Slope(GP) estimator is only applicable if γ < 1.

Estimation Based on the Original Data Let αk , γk and σk be the estimates of α, γ and σ based on (a) the exceedances y1 , . . . , yk over u, or (b) the upper ordered values yi = xn−i+1:n , as deﬁned in the preceding lines. Moreover, we assume that the original data x1 , . . . , xn are available. Put αk,n = αk and γk,n = γk . Derive µk,n and σk,n from u and σk as described on page 58. Then, one may use Wγn,k ,µn,k ,σn,k as a parametric estimate of the upper tail of the underlying df F . Recall that the sample df Fn (x; ·) is a global estimator of F . Likewise, use the pertaining parametric densities and qfs for estimating the underlying density f and qf F −1 near the upper endpoints. Thereby, we obtain parametric competitors of the kernel density and the sample qf. 10 Drees,

H. (1995). Reﬁned Pickands estimators of the extreme value index. Ann. Statist. 23, 2059–2080. 11 Falk, M. (1994). Eﬃciency of convex combinations of Pickands estimator of the extreme value index. Nonparametric Statist. 4, 133–147. 12 Pereira,

T.T. (2000). A spacing estimator for the extreme value index. Preprint.

136

5. Generalized Pareto Models

Diagram of Estimates The choice of the threshold u or, likewise, the number k of upper extremes corresponds to the bandwidth selection problem for the kernel density in Section 2.1. Such a choice can be supported visually by a diagram. Thereby, estimates γk,n , µk,n and σk,n are plotted against the number k of upper ordered values. The following properties become visible: • if k is small, then there is a strong ﬂuctuation of the values γk,n for varying k; • for an intermediate number k of extremes, the values of the estimates γk,n stabilize around the true value γ, • ﬁnally, if k is large, then the model assumption may be strongly violated and one observes a deviation of γk,n from γ. In other words, if k is small, then the variance of the estimator is large and the bias is small (and vice versa); in between, there is a balance between the variance and the bias and a plateau becomes visible. We start with a negative result: the Hill diagram for 400 Pareto data generated under the shape, location and scale parameters α = 10, µ = −1, σ = 1 provides a smooth curve, yet it is diﬃcult to detect the aforementioned plateau in Fig. 5.2 (left). This is due to the fact that the Hill estimator is inaccurate for larger α and µ = 0, also see (6.38). 6

mean excess

Hill estimates

0.2 4

2

0.0

0.0 300 100 number k of extremes

0.4

0.2 Pareto data

Fig. 5.2. (left.) Hill diagram for 400 Pareto data generated under the shape, location and scale parameters α = 10, µ = −1, σ = 1. (right.) Pareto mean excess function pertaining to Hill (dashed) and MLE(GP) (dotted) estimates based on k = 45 upper extremes; sample mean excess function (solid).

For real data, one may compare, e.g., the mean excess function, which belongs to the estimated parameters, with the sample mean excess function in order to check the adequacy of a parametric estimate. In Fig. 5.2 (right), one recognizes

5.1. Estimation in Generalized Pareto Models

137

MLE (GP) estimates

again that the Hill estimate is not appropriate. The MLE(GP) with values α = −20.23 (respectively, γ = −0.05) is acceptable. In Fig. 5.2, the estimation was carried out within the ideal model for the MLE(GP) and, hence, the performance of the MLE(GP) can be improved when the number k is equal to the sample size n = 400. The situation changes for Fr´echet data. Recall from (1.47) that a Fr´echet df is close to a Pareto df in the upper tail.

1

Fig. 5.3. MLE(GP) estimates αk,n plotted against k = 1, . . . , 400 for standard Fr´echet data under the shape parameter α = 1. 100

300

number k of extremes

In Fig. 5.3, a plateau with right endpoint k = 80 becomes visible. Therefore, we suggest to base the estimation on this number of upper extremes.

Automatic Choice of the Number of Extremes The selection of the right endpoint of a plateau may also be done in an automatic manner. The following ad hoc procedure works reasonably well. Let γk,n be estimates of the shape parameter γ based on the k upper extremes (likewise, one may deal with estimates αk,n of α). Denote the median of γ1,n , . . . , γk,n by med(γ1,n , . . . , γk,n ). Choose k ∗ as the value that minimizes 1 β i |γi,n − med(γ1,n , . . . , γk,n )| k

(5.17)

i≤k

with 0 ≤ β < 1/2. A slight smoothing of the series of estimates improves the performance of the procedure for small and moderate sample sizes. Modiﬁcations are obtained, for example, by taking squared deviations and γk,n in place of the median. Other selection procedures may be found in the papers by Beirlant et al.13 13 Beirlant,

J., Vynckier, P. and Teugels, J.L. (1996). Tail index estimation, Pareto quantile plots, and regression diagnostics. JASA 91, 1659–1667.

138

5. Generalized Pareto Models

and by Drees and Kaufmann14 and in the literature cited therein. We also refer to Cs¨org˝ o et al.15 for the smoothing of tail index estimators.

Peaks–Over–Threshold and Annual Maxima Methods Besides selecting exceedances or upper ordered values from the original data x1 , . . . , xn , there is another method of extracting extremes, namely by taking maxima out of blocks (see (1.5) and Chapter 4). Therefore, there are two diﬀerent approaches to the estimation of the tail index α or γ of a df: • based on exceedances or upper extremes as dealt with in this section (pot method), • based on maxima within certain subperiods (annual maxima method). For the second approach, one must assume that the original data x1 , . . . , xn are observable. Let {x(j−1)m+1 , . . . , xjm },

j = 1, . . . , k,

(5.18)

be a partition of x1 , . . . , xn , where n = mk, and take the maximum yj out of the jth block. Assume that the xi are governed by a df F . If the block size m is large, then an EV df can be accurately ﬁtted to the actual df F m of the maximum. Yet, one must cope with the disadvantage that the number k of maxima is small (and vice versa). According to foregoing remarks, the EV df G has the same shape parameter as the GP df W corresponding to the exceedances. For discussions concerning the eﬃciency of both approaches, we refer to [42], Section 9.6 and to Rasmussen et al.16 .

Random Thresholds If the k largest values are selected, then xn−k:n may be regarded as a random threshold. The index is also random either if the sample sizes are random or as in the case of automatically selected thresholds (in (5.17)). Other choices are • the smallest annual maximum, 14 Drees, H. and Kaufmann, E. (1998). Selection of the optimal sample fraction in univariate extreme value estimation. Stoch. Proc. Appl. 75, 149–172 15 Cs¨ org˝ o, S., Deheuvels, P. and Mason, D.M. (1985). Kernel estimates of the tail index of a distribution. Ann. Statist. 13, 1050–1078. 16 Rasmussen,

P.F., Ashkar, F., Rosbjerg, D. and Bob´ee, B. (1994). The pot method for ﬂood estimation: a review, 15–26 (in [13]).

5.1. Estimation in Generalized Pareto Models

139

• the threshold such that, on the average, the number of selected extremes in each year is equal to 3 or 4. For the latter two proposals, we refer to a paper by Langbein17 .

Extrapolation In this section, a GP df was ﬁtted to the upper tail of the sample df, thus also to the underlying df F in the region where the exceedances are observed. Using this parametric approach, it is possible to construct estimates of certain functional parameters of F with variances smaller than those of nonparametric estimates. This advantage is possibly achieved at the cost of a larger bias if the parametric modeling is inaccurate. There will be a new maximum or observations larger than the present ones in the near future. These observations are outside of the region where a GP df was ﬁtted to the data. Statistical questions concerning future extremes should be approached with the following pragmatic attitude. Of course we do not know whether the insight gained from the data can be extrapolated to a region where no observation has been sampled. Keep your ﬁngers crossed and evaluate the risk of future extreme observations under the estimated df. In the long run, more information will be available and the modeling should be adjusted again.

Estimation of Parameters When a Trend Must be Dealt With In Section 4.1, pages 113–116, we studied the question of estimating location parameters µ(ti ; β0 , . . . , βp ) of EV dfs which depend on the time ti . Thus we assumed that there is certain trend in the data yi that are measurements at time ti . For that purpose we • estimated the trend in the data by the least squares method; • employed parametric estimators in the EV model to the residuals, • deduced estimators of the parameters µ(ti ; β0 , . . . , βp ). Now, we assume that exceedances yi over a threshold u are observed within a certain time period. The exceedances yi at the exceedance times ti follow GP dfs Wγ,u,σ(ti ;β0 ,...,βp ) . Thus, we allow a trend in the scale parameter σ. The aim is to estimate γ and a trend function σ(t; β0 , . . . , βp ) in the scale parameter. Let nj be the number of exceedances within a jth sub–period. We implicitly assume stationarity for the exceedances in each sub–period. We proceed in the following manner: 17 Langbein,

W.B. (1949). Annual ﬂoods and the partial duration ﬂood. Transactions Geophysical Union 30, 879–881.

140

5. Generalized Pareto Models

ˆj for each sub–period; • determine estimates γˆj and σ • take γˆ =

j

nj γˆj

j

nj as an estimate of the stationary parameter γ,

• evaluate a trend function for the scale parameter by ﬁtting a regression line to the σj .

0.2

1996

1993

1990

1987

1999

0.0

0.1

ozone ppm

0.3

0.4

Example 5.1.2. (Ozone Cluster Maxima18 .) The data set used in this study has been collected by the Mexico City automatic network for atmospheric monitoring (RAMA) (from the south monitoring station called Pedregal). The data are the daily maxima of ozone levels measured in parts per million from July 1987 to April 1999, stored in mexozone.dat.

year

Fig. 5.4. Time series of daily maximum ozone levels from Pedregal Monitoring Station from July 1987 to April 1999. We take eleven twelve month periods from July to June and one last period from July to April. The data yi are cluster maxima taken according to the run length deﬁnition with a minimum gap of two days. In Table 5.1 we listed the estimates of the scale parameters σj for the threshold u = 0.22. Table 5.1. Scale parameters σ of estimated GP distributions for the threshold u = .22 and estimated shape parameter γ = −.35. year

σ

87

88

89

90

91

92

93

94

95

96

97

98

.066

.061

.066

.082

.092

.068

.050

.051

.046

.041

.043

.028

18 Villase˜ nor, J.A., Vaquera, H. and Reiss, R.–D. (2001). Long–trend study for ground level ozone data from Mexico City. In: 2nd ed. of this book, Part V, pages 353–358.

5.1. Estimation in Generalized Pareto Models

141

The regression curve ﬁtted to the σj is exp(−0.003t2 − 0.34t − 0.01). Similar calculations can be carried out within the exponential model where the shape parameter γ is equal to zero.

This data set is also studied in Example 6.5.2 in conjunction with the question of penultimate approximations.

Estimation Based on the Annual k Largest Order Statistics. Up to now we investigated two diﬀerent methods of extracting upper extremes from a set of data, namely, to take maxima out of blocks or to take exceedances over a higher threshold, where the latter includes the selection of the largest k values out of the data set. One may as well select the k largest values out of each block. If k = 1, this reduces to the usual blocks method, whereas for larger k this method is closer to the pot–method. A parametric statistical model for the k largest order statistics is suggested by limiting distributions as in the case of maxima and exceedances (see, e.g., [42], Section 5.4). One may take submodels, which are the Gumbel, Fr´echet and Weibull models if k = 1, or a uniﬁed model in the von Mises parameterization. Example 5.1.3. (Exceptional Athletic Records.) The data (communicated by Richard Smith), illustrated in Fig. 5.5 and stored in records.dat, concern women’s 1500m and 3000m best performances from 1972 to 1992. M.E. Robinson and J.A. Tawn19 and R.L. Smith20 analyzed these data in view of an improvement of the 3000 m record from 502.62 to 486.11 seconds in the year 1993. Conﬁdence intervals and, respectively, prediction intervals showed evidence that the outstanding record in 1993 is inconsistent with the previous performances. Some insight into the nature of the record in 1993 would be also gained by computing T –year records based on the historical data. From the scatterplots one recognizes trends and an “Olympic year” eﬀect in the data. In view of the similar nature of both data sets and the small sample sizes, one could take into account a pooling of the data, cf. Section 14.3.

Asymptotic Distributions of Estimators and Conﬁdence Intervals in the Generalized Pareto Model We ﬁrst deal with the case of iid random variables with common GP df. 19 Robinson, M.E. and Tawn, J.A. (1995). Statistics for exceptional athletics records. Appl. Statist. 44, 499–511. 20 Smith,

R.L. (1997). Statistics for exceptional athletics records: letter to the editor. Appl. Statist. 46, 123–127.

142

5. Generalized Pareto Models

250

550

records 3000

records 1500

245

240

235

530

510

1972

1976

1980

year

1984

1988

1992

1972

1976

1980

1984

1988

1992

year

Fig. 5.5. Women’s best performances for 1500m (left) and 3000m (right).

• (The MLE in the GP1 Model.) We formulate the asymptotic normality of the MLE α ˆ k in the GP1 model in terms of the γ–parameterization to make the result easily comparable to the performance of the MLE in the GP model. ˆk For iid random variables with common df W1,α,0,σ , the reciprocal MLE 1/α is asymptotically normal with mean γ = 1/α and variance γ 2 /k. • (The MLE in the GP Model.) The MLE (ˆ γk , σ ˆk ) of (γ, σ) in the GP model is asymptotically normal with mean vector (γ, σ) and covariance matrix Σ/k, where ⎛ ⎞ (1 + γ) σ ⎠ Σ = (1 + γ) ⎝ σ 2σ 2 if γ > 1/2. In particular, the asymptotic variance of γˆk is (1 + γ)2 /k. This result is taken from the paper by Davison and Smith mentioned on page 121. We see that the asymptotic variance of 1/α ˆ k is much smaller than that of γˆk for γ close to zero. Yet, as noted on page 136, the MLE in the GP1 model can have a large bias if the special Pareto assumption is violated. The estimation based on random exceedances or upper order statistics can be reduced to the preceding problem concerning iid random variables by using the conditioning devices in Section 8.1, page 234. In the ﬁrst case, one must deal with a random number K of exceedances over a threshold u: apply the preceding results conditioned on K = k. Then, the γK , σ ˆK ) and variances asymptotic normality holds for the estimators 1/α ˆ K and (ˆ and covariance matrices with k replaced by E(K). Secondly, u is replaced by the order statistic Xn−k:n of n iid random variables Xi . The MLEs are computed conditioned on Xn−k:n = u. The resulting estimators have the same performance as 1/α ˆ k and (ˆ γk , σ ˆk ). Such calculations can be carried out for a larger class of estimators.

5.2. Testing Within Generalized Pareto Models

143

γK , σ ˆK ) are MLEs in a pertaining point process We remark that 1/α ˆ K and (ˆ model (see [43]). Moreover, these results remain valid under distributions which are suﬃciently close (in the upper tail) to a GP df. We refer to (6.35) for an appropriate technical condition. Based on the asymptotic normality result for estimators it is straightforward to construct conﬁdence intervals for the parameters (as it was done in Section 3.2). It would also be of interest to deal with conﬁdence bands and testing in conjunction with reliability functions such as the mean excess function. Yet, this goal is not further pursued in this book.

5.2

Testing Within Generalized Pareto Models

For testing an exponential upper tail of a distribution against other GP–type tails one may again use the sample skewness coeﬃcient. Subsequently, we prefer the sample coeﬃcient which leads to test statistic introduced by Hashofer and Wang21 We also include the LR test for the exponential model. The tests are either based on exceedances over a threshold u or on the k + 1 largest order statistics. Use the conditioning arguments given at the end of Section 8.1 to ﬁx the critical values.

A Test Based on the Sample Coeﬃcient of Variation 1/2

The coeﬃcient of variation varF /mF is the standard deviation divided by the mean. In the following we use the reciprocal squared coeﬃcient. This value is equal to 1−2γ for GP distributions Wγ,0,σ with γ < 1/2. For exceedances y1 , . . . , yk over a threshold u one may take the scale invariant test statistic (¯ yk − u)2 /s2k . Such a 22 test statistic was proposed by Gomes and van Montfort . Using ordered values one obtains the corresponding (location and scale invariant) test statistic (¯ xk − xn−k:n )2 (5.19)

2 , 1 ¯k i≤k xn−i+1:n − x k−1 where x ¯k = k1 i≤k xn−i+1:n . This is the test statistic introduced by Hashofer and Wang for testing γ = 0 against γ = 0. The asymptotic considerations by Hashofer and Wang were based on results in a paper by Weissman23 which is of interest in 21 Hashofer, A.M. and Wang, Z. (1992). A test for extreme value domain of attraction. JASA 87, 171–177. 22 Gomes, M.I. and van Montfort, M.A.J. (1986). Exponentiality versus generalized Pareto, quick tests. Proc. 3rd Internat. Conf. Statist. Climatology, 185–195. 23 Weissman,

I. (1978). Estimation of parameters and large quantiles based on the k largest observations. JASA 73, 812–815.

144

5. Generalized Pareto Models

its own right; alternatively, one may use results in [48], pages 136–137, and the conditioning argument. The local, asymptotic optimality of tests based on such test statistics was proven by Marohn (article cited on page 119).

Likelihood Ratio (LR) Test for the Exponential (GP0) Model Within the GP model, one tests H0 : γ = 0 against H1 : γ = 0 with unknown scale parameters σ > 0. Thus, the exponential hypothesis is tested against other GP distributions. For a given vector y = (y1 , . . . , yk ) of exceedances over the threshold u, the likelihood ratio (LR) statistic is wγˆ ,u,ˆσ (yi ) w0,u,˜σ (yi ) TLR (y) = 2 log i≤k

i≤k

with (ˆ γ, σ ˆ ) and σ ˜ denoting the MLEs in the GP and GP0 models. The p–value is pLR (y) = 1 − χ21 (TLR (y)). The p–value, modiﬁed with a Bartlett correction, is

p(y) = 1 − χ21 TLR (x)/(1 + b/k) for b = 4.0. Recall that u is replaced by xn−k:n if the largest ordered values are taken instead of exceedances.

5.3

Testing Extreme Value Conditions with Applications co–authored by J. H¨ usler and D. Li24

We introduce two methods of testing one dimensional extreme value conditions and apply them to two ﬁnancial data sets and a simulated sample.

Introduction and the Test Statistics Extreme value theory (EVT) can be applied in many ﬁelds of interest as hydrology, insurance, ﬁnance, if the underlying df F of the sample is in the max–domain of attraction of an extreme value distribution Gγ , denoted by F ∈ D(Gγ ). We suppose commonly that the random variables X1 , X2 , . . . , Xn are iid with df F such that for some real γ there exist constants an > 0 and reals bn with (5.20) lim F n (an x + bn ) = Gγ (x) := exp −(1 + γx)−1/γ n→∞

24 both

at the Department of Math. Statistics, University of Bern.

5.3. Testing Extreme Value Conditions with Applications

145

where 1 + γx > 0. In case of γ = 0, G0 (x) is interpreted as exp(−e−x ), cf. also (1.25). Under the extreme value condition (5.20), the common statistical approach consists of estimating the extreme value index γ and the normalizing constants bn and an which are the location and scale parameters. Then based on these estimators, one can deduce quantiles, tail probabilities, conﬁdence intervals, etc. The goodness–of–ﬁt is usually analyzed in a qualitative and subjective manner by some graphical devices, as, e.g., by Q–Q plots and excess functions, which can easily be drawn with Xtremes, cf. also the remarks about “the art of statistical modeling” on page 61. However the extreme value condition does not hold for all distributions. For example, the Poisson distribution and the geometric distribution are not in D(Gγ ) for any real γ (see, e.g., C.W. Anderson25 , or Leadbetter et al. [39]). Thus, before applying extreme value procedures to maxima or exceedances one should check the basic null–hypothesis H0 :

F ∈ D(Gγ ) for some real γ.

We are going to introduce two tests in (5.21) and, respectively, (5.22) which we call test E and test T. Dietrich et al.26 present the following test E assuming some additional second order conditions. They propose to use the test statistic 1 2 log Xn−[kt],n − log Xn−k,n t−ˆγ− − 1 − (1 − γˆ− ) tη dt (5.21) En := k γˆ+ γˆ− 0 for some η > 0. It is shown that En converges in distribution to 1 t−γ− − 1 P (1 − γ− )(t−γ− −1 W (t) − W (1)) − (1 − γ− )2 Eγ : = γ− 0 1 2 t−γ− − 1 R + (1 − γ− )R s−γ− −1 log s ds tη dt, + γ− t where γ+ = max{γ, 0}, γ− = min{γ, 0}, W is Brownian motion, and the random variables P and R are some integrals involving W (for details see Dietrich et al.). The estimates γˆ+ and γˆ+ for γ+ and γ− , respectively, are ﬁxed to be the moment estimator, cf. page 134. Thus the limiting random variable Eγ depends in general on γ and η, only. However, if γ ≥ 0, the limiting distribution does not depend on γ, since the terms (t−γ− − 1)/γ− are to be interpreted as − log t. Dietrich et al. state the result for 25 Anderson, C.W. (1970). Extreme value theory for a class of discrete distributions with application to some stochastic processes. J. Appl. Probab. 7, 99–113. 26 Dietrich,

D., de Haan, L. and H¨ usler, J. (2002). Testing xtreme value conditions. Extremes 5, 71–85.

146

5. Generalized Pareto Models

η = 2, but it is easy to extend the result to any η > 0. This approach is based on sample qfs and of Gγ . They propose in addition another test statistic which is valid for γ > 0. But it seems that this test statistic is no so good as the test statistic En . For testing H0 , one needs to choose an η and to derive the quantiles of the limiting random variable Eγ , which can be done by simulations for some γ, see Table 5.2 below. Table 5.2. Quantiles Qp,γ of the limiting random variable Eγ for the test E with η = 2. p γ

0.10

0.30

0.50

0.70

0.90

0.95

0.975

0.99

≥0 −0.1 −0.2 −0.3

0.028 0.027 0.027 0.027

0.042 0.041 0.040 0.040

0.057 0.054 0.053 0.054

0.078 0.074 0.072 0.073

0.122 0.116 0.114 0.113

0.150 0.144 0.141 0.140

0.181 0.174 0.169 0.168

0.222 0.213 0.208 0.206

−0.4 −0.5 −0.6 −0.7

0.027 0.027 0.027 0.028

0.040 0.040 0.040 0.041

0.054 0.054 0.054 0.055

0.073 0.073 0.074 0.074

0.114 0.115 0.116 0.118

0.141 0.141 0.144 0.147

0.169 0.169 0.173 0.176

0.207 0.208 0.212 0.218

Then in applications one continues as follows: • First, estimate γˆ+ and γˆ− by the moment estimator and calculate the value of the test statistic En . • Secondly, determine the corresponding quantile Q1−α,ˆγ by linear interpolation using the values of Table 5.2. Here γˆ = γˆ+ + γˆ− and α is usually 0.05. Moreover we use Q1−α,ˆγ = Q1−α,−0.7 if γˆ < −0.7. • Finally, compare the value of En with the quantile Q1−α,ˆγ . If En > Q1−α,ˆγ , then reject H0 with nominal type I error α. Drees et al.27 propose a test T restricted to γ > −1/2, assuming also some additional second order conditions. For each η > 0, their test statistic 1 2 x−ˆγ − 1 ˆ n¯ Fn a + bn/k − x xη−2 dx ˆn/k (5.22) Tn := k k γˆ 0 1

2 converges in distribution to Tγ := 0 W (x)+ Lγ (x) xη−2 dx, where W is Brownγ, a ˆ, ˆb), ian motion, and the process Lγ depends on the asymptotic distribution of (ˆ 27 Drees,

H., de Haan, L. and Li, D. (2006). Approximations to the tail empirical distribution function with application to testing extreme value conditions. J. Statist. Plann. Inf. 136, 3498–3538.

5.3. Testing Extreme Value Conditions with Applications

147

√ which is some k–consistent estimator of (γ, a, b). Now proceed as in case of test E based on the quantiles in Table 5.3. Table 5.3. Quantiles Qp,γ of the limiting random variable Tγ for the test T with η = 1.0. p γ

0.10

0.30

0.50

0.70

0.90

0.95

0.975

0.99

4 3 2 1.5

0.086 0.085 0.083 0.082

0.123 0.120 0.116 0.115

0.161 0.156 0.150 0.148

0.212 0.205 0.195 0.192

0.322 0.307 0.286 0.282

0.393 0.372 0.344 0.340

0.462 0.440 0.402 0.400

0.558 0.532 0.489 0.480

1 0.5 0.25 0

0.082 0.083 0.085 0.089

0.114 0.116 0.119 0.126

0.146 0.149 0.153 0.163

0.189 0.194 0.120 0.213

0.276 0.285 0.295 0.319

0.330 0.343 0.355 0.388

0.388 0.404 0.415 0.455

0.466 0.481 0.499 0.542

−0.1 −0.2 −0.3 −0.4

0.091 0.093 0.096 0.100

0.129 0.133 0.139 0.145

0.168 0.174 0.183 0.192

0.221 0.231 0.242 0.256

0.330 0.350 0.369 0.393

0.400 0.425 0.449 0.484

0.471 0.500 0.531 0.576

0.569 0.604 0.653 0.690

−0.45 −0.499

0.103 0.107

0.150 0.157

0.199 0.210

0.320 0.338

0.416 0.439

0.511 0.546

0.605 0.652

0.735 0.799

The exact formulas of Lγ and Tγ are known for the MLE (for MLEs see Smith, cf. page 111, and Drees et al.28 ) which depend on γ and η, only. Similar to the test E, the test T can be applied for testing F ∈ D(Gγ ), but only if γ > −1/2. Note that this second approach is based on the sample df. H¨ usler and Li29 discuss the tests E and T by extensive simulations. If F ∈ D(Gγ ), then the power depends on how ’close’ F is to some F ∗ ∈ D(Gγ ). For instance, if F = Poisson(λ) with λ small, the tests detect with high power the alternative. However, if λ is large, so the Poisson df could be approximated by a normal one, then the power is getting small. In summary, they suggest to 1. choose η = 2 for the test E and η = 1 (or maybe also η = 2) for the test T; 2. if the extreme value index γ seems to be positive, then both tests can be applied equally well to test H0 ; otherwise the test E is preferable. 28 Drees, H., Ferreira, A. and de Haan, L. (2004). On maximum likelihood estimation of the extreme value index. Ann. Appl. Probab. 14, 1179–1201. 29 H¨ usler,

J. and Li, D. (2006). On testing extreme value conditions. Extremes 9, 69–86.

148

5. Generalized Pareto Models

Data and Analysis

MLE Mon.

γ

−0.3

−0.2

−0.2

−0.1

−0.1

0.0

0.0

daily log return

0.1

0.1

0.2

0.3

0.2

We apply the two tests to ﬁnancial data. First, two examples consider log–returns, cf. Section 16.1, of daily equity over the period 1991–2003 for ABN ARMO and for the ING bank with sample size n = 3283. The other data are log–returns of daily exchange rates Dutch guilder–U.S. dollar and British pound–U.S. dollar during the period from January 1, 1976 to April 28, 2000 with sample size n = 6346. For each data mentioned, we ﬁrst calculate the maximum likelihood estimator (MLE) and moment estimator (Mon.) of the extreme value index, which are presented in the upper right plots in the ﬁgures for varying k. Secondly we derive the test statistics Tn and En and their corresponding 0.95 quantiles, which are shown in the two lower plots in each Fig. 5.6 to 5.9, also with varying k. Fig. 5.6 and 5.7 show the data, the ML and the moment estimators for γ depending on the chosen number k and the two tests E and T applied to the largest k observations for the ING and the ABN AMRO example.

0

500

1000

1500

2000

2500

3000

0

100

200

Index

0.30

0.6

400

500

test statistic 0.95 quantile

En

0.0

0.00

0.1

0.05

0.2

0.10

0.15

0.3

0.4

0.20

0.5

0.25

test statistic 0.95 quantile

Tn

300 k

0

100

200

300

400

500

0

100

200

k

300

400

500

k

Fig. 5.6. Log–return of daily equity of ING bank (n = 3283).

It is evident that the test E is more sensitive to the selection of k; with large k usually the null–hypothesis is rejected by the test E. Each test provides a hint on the largest possible selection of k, preventing us to select a too large k. Note that we should select k such that k/n → 0 as n → ∞. Thus, a k up to 200 or up to 300 may be chosen in the ING and ABN ARMO examples, respectively. This is either based on the visual inspection of the γ plots or much better by the behavior

5.3. Testing Extreme Value Conditions with Applications

149

0.2 0.1 0.0 −0.1 −0.2

γ

0.05 0.00 −0.05 −0.10

MLE Mon.

−0.3

−0.15

daily log return

0.10

0.3

0.15

of the tests shown in the test plots. In this perspective, the test E seems be more sensitive. Since both Tn and En are much smaller than their corresponding 0.95 quantiles for a large range of k (k/n is from 3% to 10%), both tests tend not to reject the null–hypothesis in both examples for the mentioned k’s. So we may assume for each example that the underlying F ∈ D(Gγ ).

0

500

1000

1500

2000

2500

3000

0

100

200

Index

0.30

0.6

400

500

test statistic 0.95 quantile

En

0.0

0.00

0.1

0.05

0.2

0.10

0.15

0.3

0.4

0.20

0.5

0.25

test statistic 0.95 quantile

Tn

300 k

0

100

200

300 k

400

500

0

100

200

300

400

500

k

Fig. 5.7. Log–return of daily equity of ABN ARMO bank (n = 3283).

The situation is similar for the daily exchange rate examples, see Fig. 5.8 and 5.9. Both tests reject the null–hypothesis for large k, with k/n > 10% in the British pound–U.S. dollar exchange rate example. But again the test T is less sensitive with respect to k. This test T does not reject the null–hypothesis even for very large k in the Dutch guilder–U.S. dollar example. We also apply the two tests to a simulated sample from Poisson(λ) distribution with sample size n = 3000 and λ = 10 and 100 (see Figures 5.10 and 5.11). As mentioned before F = Poisson(10) or Poisson(100) are not in the max–domain and are not close to a normal distribution. Again the data and the MLE and the moment estimators are given. For k not small, both tests reject the null–hypothesis, so indicating that both Poisson(10) and Poisson(100) are not in the max–domain. Note that the test E has a smoother behavior than the test T which may be inﬂuenced by the strange behavior of the MLE for these data. Also we see that the test E rejects the null–hypothesis already for smaller k than the test T .

150

5. Generalized Pareto Models

Fig. 5.8. Log–return of daily exchange rate British pound–U.S. dollar.

Fig. 5.9. Log–return of daily exchange rate Dutch guilder–U.S. dollar.

151

0 −2

5

−1

10

γ

X

15

1

20

2

3

25

5.3. Testing Extreme Value Conditions with Applications

0

−3

MLE Mon.

0

500

1000

1500

2000

2500

0

3000

100

200

400

500

300

400

500

8

120

300 k

Index

test statistic 0.95 quantile

4

En

60

0

0

20

2

40

Tn

80

6

100

test statistic 0.95 quantile

0

100

200

300

400

500

0

100

200

k

k

5

140

Fig. 5.10. One sample from Poisson(10) distribution (n = 3000).

2

γ

−1

60

0

80

1

X

100

3

120

4

MLE Mon.

0

500

1000

1500

2000

2500

3000

0

100

200

Index

300

400

500

300

400

500

1.5

3.0

k

test statistic 0.95 quantile

1.0

En

1.5

0.0

0.0

0.5

0.5

1.0

Tn

2.0

2.5

test statistic 0.95 quantile

0

100

200

300 k

400

500

0

100

200 k

Fig. 5.11. One sample from Poisson(100) distribution (n = 3000).

152

5.4

5. Generalized Pareto Models

Statistics in Poisson–GP Models

Assume that the original data x1 , . . . , xn are governed by the df F . In contrast to the preceding sections, the exceedances over a given threshold u are grouped within certain cells. Let u be a high threshold and consider a partition u = u1 < u2 < · · · < um < um+1 = ∞

(5.23)

of the interval [u, ∞). The following considerations will be only basedon the frequencies n(i) of data in the m upper cells [ui , ui+1 ). Notice that k = i≤m ni is the number of exceedances over u. Note that the frequencies n(i) are part of a multinomial scheme with cell probabilities pi := F (ui+1 ) − F (ui ). If 1 − F (u) is suﬃciently small, so that a Poisson approximation corresponding to (1.4) is applicable, then one may assume that the n(1), . . . , n(m) are mutually independent and each n(i) is governed by a Poisson distribution Pλi with parameter λi = npi . We study the estimation within certain submodels which are deduced from Pareto (GP1) or generalized Pareto (GP) dfs.

The Poisson–GP1 Model Assume that F is suﬃciently close to some Pareto df W1,α,0,σ above the threshold u and, hence, F [u] is close to W1,α,0,u . Then, the parameters λi = npi can be replaced by − u−α i = 1, . . . , m, λi (α, σ) = nσ α (u−α i i+1 ), where u−α m+1 = 0. The MLEs αm and σm of the parameters α and σ in the Poisson–GP1 model must be evaluated numerically, see [16], page 140. Example 5.4.1. (Increasing the Upper Limit in Liability Insurance.) Subsequently, we consider the question that there is an upper limit of one million, which makes the whole aﬀair relatively harmless, and it is intended to increase the covering to the amount of four millions. Therefore, we are interested in the tail probabilities p1 = F (4) − F (1) and p2 = 1 − F (4), where F is the claim size distribution of those claim sizes over the priority (threshold) of 0.03 millions. Our calculations will be based on a data set of grouped claim sizes from the year 1983 (see Table 5.4; stored in im–claim.dat). Table 5.4. Frequencies of claims within priorities in millions priorities ui

0.03

0.05

0.1

0.2

0.3

0.4

0.5

1

frequencies n(i)

147

89

35

11

7

5

4

3

5.4. Statistics in Poisson–GP Models

153

According to the routine visualization of the data, it is plausible to accept the Pareto assumption. By applying the MLE in the Poisson–GP1 model, one obtains the estimate α ˆ = 1.28. The pertaining estimates of the tail probabilities are pˆ1 = 0.0093 and pˆ2 = 0.0019. These considerations indicate that an increase of the premiums by a smaller amount is suﬃcient. This calculation would lead to a disaster if the covering is removed, because very large claim sizes may occur with a probability which cannot be neglected.

The MLE in the Poisson–GP1 model has the same deﬁciencies as the Hill estimator. Therefore, we also compute the MLE in an enlarged model.

The Poisson–GP Model This is a model deduced from generalized Pareto (GP) dfs Wγ,µ,σ with shape, location and scale parameters γ, µ and σ. If F is suﬃciently close to Wγ,µ,σ , then the truncated df F [u] is close to Wγ,u,η with η = σ + γ(u − µ) (cf. (1.45)). This indicates that the problem of computing an MLE can be reduced to maximizing a likelihood function in the parameters γ and η. First, the parameters λi = npi are replaced by λi (γ, µ, σ) = nσ 1/γ ϕi (γ, η),

i = 1, . . . , m,

where

−1/γ

−1/γ ϕi (γ, η) = η + γ(ui − u) − η + γ(ui+1 − u) ,

i = 1, . . . , m − 1,

−1/γ and ϕm (γ, η) = η + γ(um − u) . Because i≤m ϕi (γ, η) = η −1/γ , the log– likelihood function as a function in γ, η and σ is 1/γ σ k log σ

+ ni log ϕi (γ, η) − n + C, l(γ, η, σ) = γ η

(5.24)

i≤m

where C is a constant. The solution to the likelihood equation (∂/∂σ)l = 0 is σ = η(k/n)γ . Furthermore, the parameter µ can be regained from γ and η by

µ = u − η 1 − (k/n)γ /γ.

(5.25)

(5.26)

By inserting the right–hand side of (5.25) in (5.24), we see that γ and η must be determined as the values maximizing

˜l(γ, η) = k(log η)/γ + ni log ϕi (γ, η). (5.27) i≤m

This must be done numerically.

154

5.5

5. Generalized Pareto Models

The Log–Pareto Model and Other Pareto–Extensions

First, we deal with mixtures of exponential, Pareto and converse Weibull distributions with respect to the Gamma distribution. We obtain the log–Pareto and the Burr model as an extension of the Pareto model. Secondly, the Benktander II and the truncated converse Weibull models are introduced which include the exponential and Pareto models.

Mixtures of Generalized Pareto Distributions Recall from (4.8) that

Fh (x) =

Fϑ (x)h(ϑ) dϑ

is the mixture of the dfs Fϑ with respect to density h. We give two examples in the present context: • (Pareto Distributions as Mixtures of Exponential Distributions.) First, we show that mixtures of exponential dfs Fϑ (x) = 1 − e−ϑx ,

x > 0,

with mean 1/ϑ > 0 are Pareto dfs, if the parameter ϑ is determined by sampling with respect to a gamma density hα (x) = xα−1 e−x /Γ(α), x > 0, with shape parameter α > 0, cf. (3.42). The mixture ∞ Fϑ (x)hα (ϑ) dϑ = 1 − (1 + x)−α , x > 0, (5.28) 0

is a Pareto df with shape, location and scale parameters α, −1 and 1. For a continuation of this topic we refer to (16.30). • (Log–Pareto Distributions as Mixtures of Pareto Distributions.) The log– Pareto df Lα,β with shape parameters α, β > 0 possesses a super–heavy upper tail. The term “super–heavy” is characterized by the property that the log–transformation leads to a df with a heavy tail. We have Lα,β (x)

=

W1,α,−1,1/β (log x)

=

1 − (1 + β log x)−α ,

x ≥ 1,

where W1,α,−1,1/β is the Pareto df with shape, location and scale parameters α, −1 and 1/β. The log–Pareto df Lα,β can be represented as a mixture of Pareto dfs with respect to the gamma density hα,β with shape and scale parameters α, β > 0.

5.5. The Log–Pareto Model and Other Pareto–Extensions Straightforward computations yield ∞ W1,z (x)hα,β (z)dz = Lα,β (x), 0

155

x ≥ 1.

Note that mixing with respect to a Dirac measure leads to a Pareto distribution again. Log–Pareto distributions within a generalized exponential power model are studied by Desgagn´e and Angers 30 . In a technical report31 associated to an article by Diebolt et al., cited on page 132, these authors mention another mixture distribution, diﬀerent from the log–Pareto one, with super–heavy tails. Log–Pareto random variables as innovations in an autoregressive process are studied by Zeevi and Glynn32 .

The Full Log–Pareto Model as an Extension of the Pareto Model We present another parametrization of log–Pareto distributions with left endpoint of the support being equal to zero, and add a scale parameter, thus getting the full log–Pareto model. Let X be a random variable with df &α,β (x) = 1 − (1 + x/β)−α , W

x > 0,

(5.29)

which is a Pareto df with shape and scale parameters α > 0 and β > 0. Then, the transformed random variable (σ/β) exp(X) − 1 has the log– Pareto df −α ˜ α,β,σ (x) = 1 − 1 + 1 log 1 + βx , x > 0, (5.30) L β σ with shape parameters α, β > 0 and scale parameter σ > 0. We have &α,σ (x), ˜ α,β,σ (x) →β→0 W L

x > 0,

(5.31)

and, therefore, the log–Pareto model can be regarded as an extension of the Pareto model. By repeating this procedure one gets models of loglog–Pareto dfs and, generally, iterated log–Pareto dfs with “mega–heavy” tails as extensions of the Pareto model. Notice that log–moments and iterated log–moments of such distributions are inﬁnite. 30 Desgagn´ e,

A. and Angers, J.–F. (2005). Importance sampling with the generalized exponential power density. Statist. Comp. 15, 189–195. 31 see

http://www.inria.fr/rrt/rr-4803.html

32 Zeevi,

A. and Glynn, P.W. (2004). Recurrence properties of autoregressive processes with super–heavy–tailed innovations. J. Appl. Probab. 41, 639–653.

156

5. Generalized Pareto Models

The Burr Model as an Extension of the Pareto Model Notice that X 1/β is a standard Pareto random variable with shape parameter αβ, if β > 0 and X is a standard Pareto random variable with shape parameter α. Such a conclusion is no longer valid if a location parameter is added. The random variable (X − 1)1/β has a Burr df Fα,β (x) = 1 − (1 + xβ )−α ,

x ≥ 0,

(5.32)

with shape parameters α, β > 0. The density is fα,β (x) = αβxβ−1 (1 + xβ )−(1+α) ,

x ≥ 0.

Burr distributions can be represented as mixtures of converse Weibull dfs. For β, ϑ > 0, let β,ϑ (x) = 1 − exp(−ϑxβ ), G x > 0, be a Weibull df on the positive half–line. By mixing again with respect to the gamma density hα over the parameter ϑ, one easily obtains ∞ β,ϑ (x)hα (ϑ) dϑ = 1 − (1 + xβ )−α = Fα,β (x), G x > 0. (5.33) 0

For β = 1, one ﬁnds the Pareto df as a mixture of exponential distributions. Burr distributions with parameter β > 1 have shapes that visually correspond to Fr´echet densities.

Benktander II Distributions We include two further families of distributions for modeling the tails of a distribution, namely the Benktander II and truncated converse Weibull distributions. Both types of distributions are well known within insurance mathematics and may be of interest in general. Formula (2.28) for mean excess functions can be employed to design a family of dfs—called Benktander II dfs33 —so that the mean excess functions are equal to xb /a for a > 0 and −a ≤ b < 1. Recall that such functions are attained by the mean excess functions of converse Weibull dfs with shape parameter α = b − 1 as u → ∞. The standard Benktander II dfs with left endpoint equal to 1 are given by

a 1−b x x ≥ 1, (5.34) −1 , Fa,b (x) = 1 − x−b exp − 1−b where a > 0 and −a ≤ b < 1 are two shape parameters. 33 Benktander,

G. (1970). Schadenverteilung nach Gr¨ osse in der Nicht–Leben–Versicherung. Mitteil. Schweiz. Verein Versicherungsmath., 263–283

5.5. The Log–Pareto Model and Other Pareto–Extensions

157 [u]

Benktander II dfs have the interesting property that truncations Fa,b are Benktander II dfs again in the form Fau1−b ,b,0,u with location and scale parameters µ = 0 and σ = u. This is the pot–reproductivity of Benktander II distributions. Also, • for b = 0, the Benktander II df is the exponential df with location and scale parameters µ = 1 and σ = 1/a, and • for b → 1, one reaches the standard Pareto df with shape parameter α = 1+a in the limit.

Truncated Converse Weibull Distributions It is analytically simpler to work with truncations of converse Weibull dfs themselves. These dfs have the additional advantage that we need not restrict our attention to Pareto dfs with shape parameter α > 1. Consider dfs

α 1−β x ≥ 1, (5.35) −1 , x H1,α,β (x) = 1 − exp − 1−β where α > 0 and β are two shape parameters. By truncating converse Weibull dfs with shape and scale parameters α ˜<0 and σ > 0 left of u = 1, one obtains dfs H1,α,β with β = 1 + α ˜ and α = |˜ α|σ α˜ . Remember that converse Weibull densities have a pole at zero and a monotonic decrease if −1 < α ˜ < 0 (which is equivalent to 0 < β < 1). The density and qf are

α 1−β x x≥1 (5.36) −1 , h1,α,β (x) = αx−β exp − 1−β and

1/(1−β) 1−β −1 log(1 − q) . H1,α,β (q) = 1 − α In agreement with Benktander II dfs, the df H1,α,β is

(5.37)

• an exponential df with location and scale parameters µ = 1 and σ = 1/α, if β = 0, and • a standard Pareto df with shape parameter α in the limit as β → 1. In particular, it is understood that H1,α,1 is deﬁned as such a limit in (5.35). Truncated converse Weibull dfs are pot–reproductive in so far as a truncation is [u] of the same type. We have H1,α,β = H1,αu1−β ,β,0,u . We present a model for exceedances yi over a threshold u: {H1,α,β,0,u : α > 0, 0 ≤ β ≤ 1}.

(5.38)

158

5. Generalized Pareto Models

For computing the MLE in that model, deduce from the ﬁrst likelihood equation for the parameters α and 0 < b < 1 that 1 (yi /u)1−β − 1 1 = . α k 1−β i≤k

By inserting the value of α in the second likelihood equation, one ﬁnds

(yi /u)1−β − 1 ∂ (yi /u)1−β − 1 1 = 0. + log(yi /u) k 1−β ∂β 1−β i≤k

i≤k

i≤k

This equation must be solved numerically. In the ﬁrst equation, the results are that we gain • the MLE for σ in the exponential model if β = 0, and • the Hill estimate for α in the limit as β → 1. If the estimated β is suﬃciently close to 1, then a Pareto hypothesis is justiﬁed. The threshold u may be replaced by an upper ordered value xn−k:n again. As in the GP case, a truncated converse Weibull distribution can be ﬁtted to the upper tail of a distribution.

Including a Scale Parameter in the Truncated Converse Weibull Model A scale parameter σ > 0 should be included in the truncated converse Weibull model. This will be done in conjunction with a representation as in the GP case. Recall that the Pareto df Wγ in the γ–parameterization is the Pareto df W1,α,−α,α , where γ = 1/α > 0. Likewise, let Hγ,β be a truncated converse Weibull df H1,α,β,−α,α with location and scale parameters −α and α, where γ = 1/α > 0. We have 1 (1 + γx)1−β − 1 , x ≥ 0, Hγ,β (x) = 1 − exp − γ(1 − β) for shape parameters γ > 0 and 0 ≤ β ≤ 1. It is apparent that Hγ,β is • the exponential df W0 , if β = 0, • the Pareto df Wγ in the limit as β → 1, and • W0 in the limit as γ → 0. Consider {Hγ,β,u,σ : γ, σ > 0, 0 < β ≤ 1}

(5.39)

as a statistical model for exceedances over a threshold u. A pot–reproductivity also holds in the extended framework.

Chapter 6

Advanced Statistical Analysis Section 6.1 provides a discussion about non–random and random censoring. Especially, the sample df is replaced by the Kaplan–Meier estimate in the case of randomly censored data. In Section 6.2 we continue the discussion of Section 2.7 about the clustering of exceedances by introducing time series models and the extremal index. The insight gained from time series such as moving averages (MA), autoregressive (AR) and ARMA series will also be helpful for the understanding of time series like ARCH and GARCH which provide special models for ﬁnancial time series, see Sections 16.7 and 16.8. Student distributions provide further examples of heavy–tailed distributions besides Fr´echet and Pareto distributions, see Section 6.3. Gaussian distributions are limits of Student distributions when the shape parameter α goes to inﬁnity. Further distributions of that kind are sum–stable distributions with index α < 2 which will be discussed in Section 6.4. Gaussian distributions are sum–stable with index α = 2. Rates of convergence towards the limiting distribution of exceedances and the concept of penultimate distributions are dealt with in Section 6.5. We also indicate a relationship between the concepts of pot–stability and regularly varying functions. Higher order asymptotics for extremes is adopted in Section 6.6 to establish a bias reduction for estimators. This method is, e.g., useful to repair the Hill estimator.

6.1

Non–Random and Random Censoring

This section deals with the nonparametric estimation of the df by means of the Kaplan–Meier estimator (also called the product–limit estimator) and with esti-

160

6. Advanced Statistical Analysis

mators in EV and GP models based on randomly censored data. Smoothing the Kaplan–Meier estimator by a kernel leads to nonparametric density estimators. We start with remarks about the ﬁxed censoring.

Fixed Censoring In the ﬁxed censorship model, one distinguishes two diﬀerent cases: • (Type–I Censoring.) The data below and/or above a certain threshold u are omitted from the sample. • (Type–II Censoring.) Lower and/or upper order statistics are omitted from the sample. One also speaks of left/right censoring, if merely the lower/upper part of the sample is omitted. Taking exceedances over a threshold or taking the k largest ordered values is a left censoring (of Type–I or Type–II) of the sample. It would be of interest to deal with such censorship models in conjunction with EV models1 .

Fixed Right Censoring in Generalized Pareto Models Let yi be the exceedances over a threshold u, yet those values above c > u are censored. Thus, we just observe zi = min(yi , c). A typical situation was described in Example 5.4.1, where c is the upper limit of an insurance policy. This question can be dealt with in the following manner: • if the number of yi ≥ c is small and the statistical procedure for continuous data—as described in the preceding sections—is robust against rounding, we may just neglect the censoring, • the number of censored data is the number of yi in the cell [c, ∞). If we take a partition of [u, ∞) as in (5.23) with um = c, we may apply the procedures already presented in Section 5.4.

Randomly Censored Data First, let us emphasize that our main interest concerns the df Fs under which the survival times x1 , . . . , xn are generated. Yet, data (z1 , δ1 ), . . . , (zn , δn ) are merely observed, where • zi = min(xi , yi ) is xi censored by some censoring time yi , • δi = I(xi ≤ yi ) provides the information as to whether censoring took place, where δi = 1 if xi is not censored, and δi = 0 if xi is censored by yi . 1 For

relevant results see Balakrishnan, N. and Cohen, A.C. (1991). Order Statistics and Inference. Academic Press, Boston.

6.1. Non–Random and Random Censoring

161

Note that this procedure may be regarded as a right censoring with respect to a random threshold. A left censoring, where zi = max(xi , yi ), can be converted to a right censoring by changing the signs. Then, we have −zi = min(−xi , −yi ). Example 6.1.1. (Stanford Heart Transplantation Data.) We provide an example of censored survival times referring to the Stanford heart transplantation data. These data consist of the survival times (in days) of n = 184 patients who underwent a heart transplantation during the period from t0 ≡ Oct. 1, 1967 to t1 ≡ Feb. 27, 1980 at Stanford. We have • the survival times x1 , . . . , xn , which are of primary interest, and • the censoring data yi = t1 − ui , where ui ∈ [t0 , t1 ] is the date of operation. The survival time xi is censored by yi if the patient is alive at time t1 . Table 6.1. Survival times xi and censoring variables δi . survival (in days)

0 1 1 1 2 3 · · · 2805 2878 2984 3021 3410 3695

censoring value

1 1 1 0 0 1 · · ·

0

1

0

0

0

0

The full data set, taken from the collection by Andrews and Herzberg (cf. page 85), is stored in the ﬁle mc–heart.dat.

Subsequently, let the xi and yi be generated independently from each other under the survival df Fs and the censoring df Fc . In the preceding example, one may assume that Fc is the uniform df on the interval [0, t1 − t0 ]. Additionally, Fc is a degenerate df in the ﬁxed censorship model. Our aim is to estimate the df Fs based on the zi and δi . As in (1.6), check that the censored values zi are governed by the df H

= 1 − (1 − Fs )(1 − Fc ) = Fs + (1 − Fs )Fc .

(6.1)

Note further that ω(H) = min(ω(Fs ), ω(Fc )). One may distinguish the following situations. • The fraction of censored data is small and the censoring may be regarded as some kind of a contamination that is negligible (such a case occurs when ω(Fc ) ≥ ω(Fs ) and Fc (x) is small for x < ω(Fs )). Yet, in this case, it can still be desirable to adopt procedures according to the present state–of–the–art censorship models. • If the fraction of censored data is large, then the usual sample df Fn based on the censored data zi will not accurately estimate the target df Fs . It is necessary to apply procedures specially tailored for censored data.

162

6. Advanced Statistical Analysis

• When using the Kaplan–Meier estimate one can recognize from the data whether ω(Fc ) < ω(Fs ). Then we have F (x) < 1 = H(x) for ω(Fc ) ≤ x < ω(Fs ). Notice that the observed zi and δi contain no information about the form of the survival time df Fs beyond ω(Fc ). One may try to estimate Fs (x) for x ≤ ω(Fc ). Then, extrapolate this result to the region beyond ω(Fc ) by means of a parametric modeling.

The Kaplan–Meier Estimate Assume again that the survival times x1 , . . . , xn are generated under the df Fs . Let z1:n ≤ . . . ≤ zn:n denote the ordered z1 , . . . , zn . If there are ties in the zi ’s, the censored values are ranked ahead of the uncensored ones. Deﬁne the concomitant δ[i:n] of zi:n by δ[i:n] := δj if zi:n = zj . The role of the usual sample df is played by the Kaplan–Meier estimate Fn∗ . We have Fn∗ (x)

= =

1− 1−

zi:n ≤x

δ[i:n] n−i+1

wi,n I(zi:n ≤ x),

(6.2)

i≤n

where wi,n

n − j δ[j:n] δ[i:n] . = n−i+1 n−j +1 j≤i−1

The wi,n are constructed in the following manner. At the beginning, each zi:n has the weight 1/n. Let zi1 :n ≤ . . . ≤ zim :n be the censored ordered values. Then, let wi,n = 1/n for i = 1, . . . , i1 − 1 and wi1 ,n = 0. The weight 1/n, initially belonging to zi1 :n , is uniformly distributed over zi1 +1:n ≤ zi1 +2:n ≤ . . . ≤ zn:n . Each of the remaining ordered values will then have the total weight 1/n + 1/(n(n − i1)). This procedure is continued for i2 , . . . , im . We see that i≤n wi,n = 1 if δ[n:n] = 1. The weight ((n − j)/(n − j + 1))δ[j:n] j≤n−1

eventually put on zn:n is omitted if im = n [which is equivalent to δ[n:n] = 0]. Then, i≤n wi,n < 1 yielding limx→∞ Fn∗ (x) < 1. From this construction of the Kaplan–Meier estimate, it is apparent which part of the information contained in the data is still available. One can recapture the ordered uncensored data and the number of censored data between consecutive ordered uncensored data. In analogy to (2.2), the Kaplan–Meier estimate Fn∗ (x) is approximately equal to the survival df Fs (x), x < ω(H), for suﬃciently large sample sizes n, written

6.1. Non–Random and Random Censoring

163

brieﬂy2 Fn∗ (x) ≈ Fs (x),

x < ω(H).

(6.3)

This relation still remains valid for x = ω(H) if Fs is continuous at this point. Then, we also have Fn∗ (zn:n ) ≈ Fs (ω(H)), which settles the question as to whether one can tell from the data that Fs (ω(H)) < 1. This entails that the zi and δi contain no information about an upper part of the survival time df Fs .

The Kernel Density Based on Censored Data A kernel estimate of the density f of Fs is obtained by a procedure corresponding to that in Section 2.1 with weights 1/n replaced by wi,n . Let 1

wi,n k fn,b (x) = b i≤n

x − zi:n b

.

According to our preceding explanations, fn,b is an estimate of the survival time density f for x < ω(H). It is advisable to employ a right–bounded version. Example 6.1.2. (Continuation of Example 4.3.1 about Annual Maximum Wind Speeds for Jacksonville, Florida.) We want to identify more closely the distribution of the tropical maximum annual wind speeds dealt with in Example 4.3.1. These data can be regarded as randomly left censored by the non–tropical wind speeds. As mentioned before the left censoring can be converted to right censoring by changing signs (these data are stored in the ﬁle ec–jwind.dat). Xtremes is applied to these negative data, yet our following arguments concern the original wind speed data. Plotting a kernel density only based on the tropical wind speeds and the kernel density for censored data we see that the distribution is now shifted to the left. This reﬂects the fact that we take into account tropical wind speeds which were censored by non–tropical ones. Another eﬀect is that the distribution of tropical wind speeds can now be better described by a Fr´echet density. Thus, the distribution is shifted to the left, yet the (visual) estimate indicates a heavier upper tail. This may have serious consequences for the forecast of catastrophic tropical storms.

Up to now there are no automatic procedures available that concern estimation within EV models based on censored data. First steps were done in the GP model. 2

See, e.g., Shorack, G.R. and Wellner, J.A. (1986). Empirical Processes with Applications to Statistics. Wiley, New York.

164

6. Advanced Statistical Analysis

Estimation in Generalized Pareto Models Given (z1 , δ1 ), . . . , (zn , δn ), consider the exceedances z˜1 , . . . , z˜k over a threshold u. zi , δ˜i ) Denote the δ-values belonging to the z˜i by δ˜1 , . . . , δ˜k . It is clear that the (˜ only depend on the exceedances of the xi and yi over the threshold u and, hence, [u] [u] [u] the exceedance dfs Fs and Fc are merely relevant. Assume that Fs can be substituted by some GP df W if u is suﬃciently large. Maximize the likelihood function (made independent of the censoring df Fc ) ˜ ˜ (wγ,σ (˜ zi ))δi (1 − Wγ,σ (˜ zi ))1−δi , (γ, σ) → log i≤k

where wγ,σ is the density of Wγ,σ . The likelihood function is computed under the condition that the xi ’s and yi ’s are independent replicates. Likewise, this can be performed in the α–parameterization. GP1 Model: The MLE in the GP1 model of α for censored data is given by

α ˆk = log(˜ zi /u) . δ˜i i≤k

i≤k

This estimator is related to the Hill estimator for non–censored data. GP Model:

The likelihood equations are solved numerically.

Extreme value analysis of randomly censored data is still in a research stadium. The preceding considerations should be regarded as a ﬁrst step.

6.2

Models of Time Series, the Extremal Index

The purpose of discussing certain time series is twofold. Firstly, we want to provide examples for which the extremal index will be speciﬁed. Secondly, we make some preparations for Chapter 16, where series of speculative asset prices will be investigated within a time series framework. Time series are based on white–noise series {εk } which are sequences of uncorrelated random variables εk satisfying the conditions E(εk ) = 0

and

E(ε2k ) = σ 2 .

Stochastic Linear Diﬀerence Equations First, we deal with ﬁrst–order diﬀerence equations for random variables Yk starting at time zero. The value of Yk is related to the value at the previous period by the equation Yk = φ0 + φ1 Yk−1 + εk

6.2. Models of Time Series, the Extremal Index

165

for certain constants φ0 , φ1 with |φ1 | < 1 and innovations εk . Notice that the random variables Yk satisfy these equations if, and only if, the random variables Xk = Yk − φ0 /(1 − φ1 ) satisfy Xk = φ1 Xk−1 + εk ,

k = 1, 2, 3, . . . .

(6.4)

By recursive substitution, one obtains Xk = φk1 X0 +

k−1

φi1 εk−i

i=0

as a solution to (6.4). If the innovations εk have zero–mean, then EXk = φk1 EX0 → 0,

k → ∞,

and V (Xk )

2k

2 2 φ1 − 1 φ2k 1 V (X0 ) + σ φ1 − 1

k → ∞, → σ 2 1 − φ21 , =

(6.5)

if, in addition, X0 , ε1 , ε2 , ε3 , . . . are pairwise uncorrelated.

Weakly and Strictly Stationary Time Series Besides weakly stationary processes—that are covariance–stationary processes (cf. page 72)—we also work with strictly stationary sequences {Xk }, where k runs over all integers or over the restricted time domain of nonnegative or positive integers. For example, if in addition to the conditions speciﬁed around (6.5) the exact

relations EX0 = 0 and V (X0 ) = σ 2 1−φ21 hold, then {Xk } is a weakly stationary series with (6.6) Cov(X0 , Xh ) = φh1 V (X0 ). We see that the solution of the stochastic linear equations converges to a stationary series. A sequence {Xk } is strictly stationary if the ﬁnite–dimensional marginal distributions are independent of the time lag h, that is, the joint distributions of Xk1 , . . . , Xkm and, respectively, Xk1 +h , . . . , Xkm +h are equal for all k1 , . . . , km and h > 1. One speaks of a Gaussian time series if all ﬁnite–dimensional marginals are Gaussian. For a Gaussian time series, weak and strict stationarity are equivalent. Example 6.2.1. (Continuation of Example 2.5.3 about Gaussian AR(1) Series.) The Gaussian time series Xk = φ1 Xk−1 + εk in (2.58) is a special case with φ1 = d and εk = (1 − d2 )1/2 Yk , where Y1 , Y2 , Y3 , . . . are iid standard Gaussian random variables. Because Xk−1 and εk are independent we know, see (8.13), that the conditional df of Xk given Xk−1 = xk−1 is the df of dxk−1 + (1 − d2 )1/2 Yk . This yields that the conditional

166

6. Advanced Statistical Analysis

expectation E(Xk |xk−1 ) and conditional variance V (Xk |xk−1 ) are equal to dxk−1 and, respectively, 1 − d2 .

Example 6.2.1 should be regarded as a ﬁrst step towards the modeling of ﬁnancial data by means of ARCH and GARCH series, see Sections 16.7 and 16.8.

AR(p) Time Series Let the set of all integers k be the time domain. Given white noise {εk } and constants φ1 , . . . , φp , deﬁne an autoregressive (AR) time series {Xk } of order p as a stationary solution to the AR equations Xk = φ1 Xk−1 + · · · + φp Xk−p + εk .

(6.7)

The time series in (6.6) and, speciﬁcally, in Example 6.2.1 with time domain restricted to the nonnegative or positive integers may also be addressed as AR(1) series.

MA(q) Time Series An MA(q) time series {Xk } for certain parameters θ1 , . . . , θq is deﬁned by Xk = εk + θ1 εk−1 + · · · + θq εk−q .

(6.8)

This process is apparently covariance–stationary. The autocovariance function is ⎧ q−h ⎨ E ε21 h ≤ q, i=0 θi θi+h r(h) = for ⎩ 0 h > q, where θ0 = 1. If the εk are independent, then {Xk } is strictly stationary. We mention two examples. • (Gaussian MA(q) Series.) One obtains a Gaussian time series in the case of iid Gaussian random variables εk . • (Cauchy MA(q) Series.) The construction in (6.8) can also be employed if the expectations or variances of the innovations εk do not exist. Then, one does not obtain an MA(q) process in the usual sense. Yet, the resulting process may still be strictly stationary. For example, one gets a strictly stationary sequence of Cauchy random variables with scale parameter σ qi=0 θi , if the εk are iid Cauchy random variables with scale parameter σ and θi > 0 for i = 1, . . . , q, because the convolution of two Cauchy random variables with scale parameters c1 and c2 is a Cauchy random variable with scale parameter c1 + c2 . We remark that two values, namely 668.3 and 828.3 at 0.07 and 0.075, are not visible in the illustration.

6.2. Models of Time Series, the Extremal Index

167

400

200

Fig. 6.1. Scatterplot of n = 200 MA(5) data of standard absolute Cauchy random variables with ci = i. 0.5

1

time i/n

ARMA(p,q) Time Series By combining (6.8) and (6.7), one obtains the ARMA equations Xk − φ1 Xk−1 − · · · − φp Xk−p = εk + θ1 εk−1 + · · · + θq εk−q .

(6.9)

This equation may be written φ(B)Xk = θ(B)εk , where B j Xk = Xk−j is the backshift operator, and θ(B) and φ(B) are deﬁned by means of the MA and AR polynomials θ(z) = 1 + θ1 z + · · · + θq z q and φ(z) = 1 − φ1 z − · · · − φp z p . An ARMA(p,q) time series {Xk } is a stationary solution to these equations. Notice that MA(q) and AR(p) processes are special ARMA processes. If the AR polynomial φ satisﬁes φ(z) = 0 for all complex numbers z with |z| ≤ 1, then it is well known that a stationary solution to the ARMA equations is found in the MA(∞) time series Xk =

∞

ψj εk−j ,

(6.10)

j=0

where the coeﬃcients ψj are determined by the equation ∞

j=0

ψj z j =

θ(z) , φ(z)

|z| ≤ 1.

The ARMA(p, q) process is said to be causal. We have EXk = 0, and the autocovariance function is ∞

r(h) = E ε21 ψj ψj+|h| . j=0

168

6. Advanced Statistical Analysis

A series {Yk } is an ARMA(p, q) process with mean µ, if Xk = Yk − µ is a causal ARMA(p, q) process. One obtains a Gaussian time series X1 , X2 , X3 , . . . if the ε k are iid Gaussian n random variables. For that purpose, check that (Xk,n )k≤m = ( j=0 ψj εk−j )k≤m is a Gaussian vector that converges pointwise to (Xk )k≤m , and the distribution of (Xk,n )k≤m converges weakly to a Gaussian distribution as n goes to ∞. For the simulation of such an ARMA process, one may use the innovation algorithm (cf. [5], page 264).

Estimation in ARMA-Models We shortly describe estimators in AR and ARMA models. We refer to time–series books such as [26] and [5] for a more detailed description. • (AR(p): Yule–Walker.) This is an estimator designed for the AR(p)–model. The Yule–Walker estimator computes estimates of the coeﬃcients φ1 , . . . , φp of the AR(p) process and the variance σ 2 of the white noise series. The estimation is based on the Yule–Walker equations. Parameter estimates are obtained by replacing the theoretical autocovariances in the Yule–Walker equations by their sample counterparts. • (ARMA(p, q): Hannan–Rissanen.) The Hannan–Rissanen algorithm uses linear regression to establish estimates for the parameters and the white noise variance of an ARMA(p, q) process. For this purpose, estimates of the unobserved white noise values k , . . . , k−q are computed. • (ARMA(p, q): Innovations Algorithm.) One obtains estimates of the parameters and the white noise variance of a causal ARMA(p, q) process. • (ARMA(p, q): MLE.) To compute the MLE of the parameters of a causal ARMA(p, q) process, one must use one of the preceding estimators to get an initial estimate.

The Extremal Index and the EV Modeling Revisited The EV modeling for maxima can still be employed when the iid condition is considerably relaxed. For a stationary sequence of random variables Xi with common df F it is well known that (1.27) still holds under Leadbetter’s mixing conditions D and D (see, e.g., [39]) which concern a long range and a local mixing of the random variables. If condition D is weakened, one may still have P {max{X1 , . . . , Xn } ≤ x} ≈ F θn (x)

(6.11)

with 0 ≤ θ ≤ 1 for larger values x. The constant θ is the extremal index. This index is equal to 1 for iid random variables. A condition D which guarantees that

6.2. Models of Time Series, the Extremal Index

169

(6.11) holds was introduced by Leadbetter and Nandagopalan3 and weakened to conditions D(k) by Chernick et al.4 If (6.11) holds, then an EV modeling for dfs of maxima is still possible because Gθ is an EV df if G is an EV df. In (1.27), the location and scale parameters are merely changing. As already noted in Section 2.7, the extremal index is also the limiting reciprocal mean cluster size. In the statistical literature, the extremal index was calculated for various stationary sequences. We mention only two examples concerning MA(q) and AR(1) sequences. • (MA(q) Sequence.) If the innovations εi in (6.8) have a Pareto type upper tail with tail index α > 0, then the extremal index is equal to5 α

θ = max{θi } θiα . i≤q

i≤q

• (AR(1) Sequence.) Examples of AR(1) sequences with Cauchy marginals and θ < 1 are dealt with in the aforementioned paper by Chernick et al. For the Gaussian AR(1) sequences dealt with in Section 2.5, condition D holds, and, therefore, the extremal index is equal to 1. This yields that maxima and exceedances over high thresholds asymptotically behave as those of iid random variables. This asymptotic result somewhat contradicts the clustering of exceedances in Fig. 2.21 for d = 0.8. Yet, this scatterplot only exhibits that the rate of convergence in the asymptotics is exceedingly slow. The illustration would not be drastically diﬀerent when the sample size is increased to n = 30, 000. An asymptotic formulation for that question that represents the small sample behavior of maxima (also that of the clustering) was provided by Hsing et al.6

Aggregation and Self–Similarity Let {Zi } be a strictly stationary sequence of random variables. Consider the moving average km

1 (m) Zi , k = 1, 2, 3, . . . (6.12) Zk = m i=(k−1)m+1

3 Leadbetter, M.R. and Nandagopalan, S. (1989). On exceedance point processes for stationary sequences under mild oscillation restrictions. In [14], pp. 69–80. 4 Chernick, M.R., Hsing, T. and McCormick, W.P. (1991). Calculating the extremal index for a class of stationary sequences. Adv. Appl. Prob. 23, 835–850. 5 Davis, R.A. and Resnick, S.I. (1985). Limit theory for moving averages of random variables with regular varying tail probabilities. Ann. Prob. 13, 179–195. 6 Hsing,

T., H¨ usler, J. and Reiss, R.–D. (1996). The extremes of a triangular array of normal random variables. Ann. Appl. Prob. 6, 671–686.

170

6. Advanced Statistical Analysis

which is called aggregated sequence with level of aggregation m. It is evident that the aggregated sequence is again strictly stationary. In that context, one also speaks of self–similarity when the aggregated sequence is distributional of the same type as the original one. For example, if the Xi are iid standard normal, then (m) d

m1/2 Xk

= X1 ,

(6.13)

that is we have equality of both random variables in distribution. This can be extended to all sum–stable random variables such as Cauchy and Levy random variables, see Section 6.4. Another example is provided in the subsequent Section 6.3 about Student distributions.

6.3

Statistics for Student Distributions

In (1.62) we introduced the standard Student distribution with shape parameter α > 0 and density −(1+α)/2 x2 (6.14) fα (x) = c(α) 1 + α where c(α) = Γ((1 + α)/2)/(Γ(α/2)Γ(1/2)α1/2 ). Apparently, such a Student distribution has lower and upper tails with both tail indices equal to α. We see that the Cauchy distribution is a special case for α = 1, cf. page 27. For positive integers α = n, we obtain in (6.14) the well–known Student distribution (t–distribution) with n degrees of freedom. This distribution can be represented by (6.15) X (Y /n)1/2 , where X and Y are independent random variables distributed according to the standard normal df and the χ2 –df with n degrees of freedom, cf. page 123. Recall that a χ2 random variable with n degrees of freedom is a gamma random variable with shape parameter r = n/2 and scale parameter σ = 2.

A Stochastic Representation of Student Distributions Using gamma random variables one may ﬁnd a representation as in (6.15) for all Student distributions. Consider the ratio X/(Y /r)1/2 , where again X and Y are independent, X is standard normal and Y is a standard gamma random variable with parameter r, cf. (4.6). The density is given by ∞

gr (z) = ϑϕ(ϑz) 2rϑhr (rϑ2 ) dϑ 0

=

z 2 −(2r+1)/2 Γ((2r + 1)/2) 1+ . 1/2 2r Γ(r)(2πr)

(6.16)

6.3. Statistics for Student Distributions

171

This is the Student density in (6.14), if r = α/2. Notice that the Student density fα is the reciprocal scale mixture of normal densities taken with respect to the distribution of (2Y /α)1/2 , where Y is a gamma random variable with parameter r = α/2. Alternatively, one may speak of a scale mixture of normal densities with respect to the distribution of (2Y /α)−1/2 .

Properties of Student Distributions • (Asymptotic Normality.) Using the relation (1 + x2 /α)α/2 → exp(−x2 /2) as α → ∞ one may prove that fα is the standard Gaussian density in the limit as α → ∞. • (Construction of a Self–Similar Sequence.) Let the {Xi } be iid standard normal random variables, and let Y be a gamma random variable with parameter r = α/2 which is independent of the sequence {Xi }. Then, the Zi = Xi /(2Y /α)1/2 are Student random variables with parameter α. Consider again moving (m) averages Zk in (6.12). As a direct consequence of (6.13) one obtains (m) d

m1/2 Zk

= Z1

and, therefore, the Zi are self–similar.

Maximum Likelihood Estimation in the Student Model This is one of the earliest examples of the use of the ML method (R.A. Fisher (1922) in the article cited on page 47). The likelihood equations have no explicit solution and must be numerically computed. In such cases, we will apply a Newton–Raphson iteration procedure by which the initial value of the iteration is an estimate determined by another estimation method. A local maximum of the likelihood function is occasionally computed instead of a global maximum.

Including a Skewness Parameter Including a location parameter δ in the standard normal random variable X one obtains a noncentral Student distribution with noncentrality parameter δ. An extension to the multivariate framework may be found in Section 11.3.

172

6.4

6. Advanced Statistical Analysis

Statistics for Sum–Stable Distributions co–authored by J.P. Nolan7

We add some statistical results for non–degenerate, sum–stable distributions which are diﬀerent from the Gaussian ones. Sum–stable distributions are heavy–tailed, like Student distributions, if the shape parameter α (index of stability) is smaller than 2. All sum–stable distributions have unimodal densities. Generally, a df F is sum–stable, if F m∗ (am x + bm ) = F (x)

(6.17)

for a certain choice of constants am > 0 and bm . It is well known that am = m1/α for some α with 0 < α ≤ 2, also see page 31. Thus, we have α = 2 for the normal df and α = 1 for the Cauchy df. The L´evy distribution is another example of a sum–stable distribution with α = 1/2, for which a simple representation is feasible. The L´evy density is f (x) = (2π)−1/2 x−3/2 exp(−(2x)−1 ),

x ≥ 0,

(6.18)

which is a special reciprocal gamma density, see (3.43). Check that

' F (x) = 2 1 − Φ 1/x is the pertaining df. In contrast to the normal and Cauchy distributions, the L´evy distribution is not symmetric. The heavy tails and the possible asymmetry make stable laws an attractive source of models. The stability property (6.17) is closely related to the Generalized Central Limit Theorem (GCLT). The classical Central Limit Theorem applies to terms having ﬁnite variance: if X1 , X2 , . . . have ﬁnite variance, then m−1/2 (X1 + X2 + · · · + Xm ) − m1/2 EX1 converges in distribution to a normal distribution. If the terms X1 , X2 , . . . have inﬁnite variance, then the normalized sums cm (X1 + X2 + · · · + Xm ) − dm converge in distribution to a stable law, where the term cm must be of the form m−1/α . Hence, stable laws are the only possible limiting distributions of normalized sums of iid terms. Until recently, stable distributions were inaccessible for practical problems because of the lack of explicit formulas for the densities and distribution functions. However, new computer programs make it feasible to use stable distributions in applications. 7 American

University, Washington DC

6.4. Statistics for Sum–Stable Distributions

173

All computations with sum–stable distributions were done using a DLL– version of STABLE8 .

Some Basic Facts About Characteristic Functions Since there are no explicit formulas for stable densities, they are usually described through their characteristic functions or Fourier transforms. Let x+iy be the usual representation of complex numbers and recall that exp(ix) = cos(x) + i sin(x). The expectation of a complex variable X + iY is deﬁned as E(X + iY ) = E(X) + iE(Y ). The characteristic function χX of a real–valued random variable X is deﬁned as

χX (t) = E exp(itX) .

(6.19)

It is well known that there is a one–to–one relationship between the distribution of X and the characteristic function χX . The importance of characteristic functions becomes apparent from the fact that χX+Y = χX χY for independent random variables X and Y . Because exp(u + w) = exp(u) exp(w) for complex numbers u and w we have

χµ+ηX (t) = E exp(iηtX) exp(iµt) = χX (ηt) exp(iµt)

(6.20)

for real numbers µ and η. Therefore, it suﬃces to specify the characteristic functions of standard variables for the construction of statistical models.

Symmetric Sum–Stable Distributions We ﬁrst introduce the standard sum–stable dfs S(α) with index of stability 0 < α ≤ 2 which are symmetric about zero. These dfs can be represented by the real–valued characteristic functions χα (t) = exp(−|t|α ).

(6.21)

The support of the df S(α) is the real line. We use the following notation for 8 The

basic algorithms are described in Nolan, J.P. (1997). Numerical computation of stable densities and distribution functions. Commun. Statist.–Stochastic Models 13, 759–774. Note that the STABLE package is no longer included in Xtremes.

174

6. Advanced Statistical Analysis Symmetric Sum–Stable Distributions:

S(α, 0, σ, µ; 0),

if scale and location parameters σ > 0 and µ are included. At the second position there is a skewness parameter which is equal to zero in the case of symmetric sum–stable distributions. The zero after the semicolon indicates a certain type of parameterization which will become important for skewed stable distributions. Observe that the characteristic functions in (6.21) are continuous in the parameter α. The Fourier inverse formula for densities implies that this also holds for the pertaining densities and dfs. This property remains valid when location and scale parameters are added. √

It is well known that S 2, 0, 1/ 2, 0; 0 is the standard normal df Φ. Thus, (6.20) yields S(2) = S(2, 0, 1, 0; 0) = Φ0,√2 √ which is the normal df with location parameter zero and scale parameter σ = 2. In addition, S(1, 0, 1, 0; 0) is the standard Cauchy df. In Fig. 6.2 we plot some symmetric sum–stable densities varying between the normal and the Cauchy density.

0.3

0.2

Fig. 6.2. Plots of symmetric, sum–stable densities with index of stability α equal to 2 (normal), 1.75, 1.5, 1.25 and 1 (Cauchy).

0.1

0.0 -5

-3

-1

1

3

5

We see that the most signiﬁcant diﬀerence between the normal density and other sum–stable symmetric densities is the weight in the tails. One could get a greater similarity in the center of the distributions by varying the scale parameter. The formulas become a bit more complicated when a skewness parameter is included. In that context we deal with two diﬀerent parameterizations. Sum–stable distributions have Pareto–like tails. Yet, it is well known that estimators of the tail index α < 2 are inaccurate if α is close to 2. This phenomenon will be clariﬁed by computing the remainder term in the Pareto approximations. From Christoph and Wolf [7] we know that the expansion fα (x) =

Γ(1 + jα) 1

sin(jαπ/2)|x|−(1+jα) + O Am (x) , (−1)j+1 π j! j≤m

(6.22)

6.4. Statistics for Sum–Stable Distributions holds for the density fα of S(α), where

Am (x) = O |x|−(1+(m+1)α) ,

175

|x| → ∞.

For m = 3, we have fα (x) =

x x −2α x −α 1 w1,α +O 1 + C(α) σ(α) σ(α) σ(α) σ(α)

(6.23)

for certain scale parameters σ(α) and constants C(α), where w1,α is the standard Pareto density with shape parameter α. The constant C(α) in the second order term satisﬁes C(α) = 24/(2 − α) + O(1), α → 2, (6.24) which shows that these constants are very large for α close to 2.

Adding a Skewness Parameter, a Continuous Parameterization To represent the family of all non–degenerate, sum–stable distributions one must include a skewness parameter −1 ≤ β ≤ 1 in addition to the index of stability 0 < α ≤ 2. For α = 2 one gets the normal df S(2) for each β. We choose a parameterization so that the densities and dfs vary continuously in the parameters. Such a property is indispensable for statistical inference and visualization techniques. The continuous location–scale parameterization introduced by Nolan9 is a variant of the (M) parameterization of Zolotarev10. Let ⎧

1−α απ α ⎪ α = 1, −1 ⎪ ⎨ exp − |t| 1 + iβ tan 2 sign(t) |t| if χX (t) = ⎪

⎪ ⎩ exp − |t| 1 + iβ 2 sign(t) log(|t|) α = 1. π

(6.25) Using this parameterization one gets a family of characteristic functions which is continuous in the parameters α and β. To prove the continuity at α = 1, notice that tan(π/2 + x) = −1/x + o(x) and, therefore, according to (1.66) tan

απ 2

|t|1−α − 1

2 |t|1−α − 1 + o(1 − α) π 1−α → (2/π) log |t|, α → 1. =

If β = 0, then one gets the family of characteristic functions in (6.21) for symmetric sum–stable distributions. The dfs pertaining to the characteristic functions in (6.25) are denoted by S(α, β; 0). We write 9 Nolan, J.P. (1998). Parameterizations and modes of stable distributions. Statist. Probab. Letters 38, 187-195. 10 Zolotarev,

V.M. (1986). One–Dimensional Stable Distributions. Translations of Mathematical Monographs, Vol. 65, American Mathematical Society.

176

6. Advanced Statistical Analysis Continuous Parameterization:

S(α, β, σ, µ; 0),

if scale and location parameters σ > 0 and µ are included. As in the case of symmetric sum–stable distributions one obtains families of dfs and densities which are continuous in all parameters. 0.3

0.2

Fig. 6.3. Plots of sum–stable densities with index of stability α equal to 2 (normal), 1.75, 1.5, 1.25 and 1 (Cauchy) and skewness parameter β = 0.75.

0.1

0.0 -5

-3

-1

1

3

5

Deduce from (6.20) that a random variable −X has the df S(α, −β; 0), if X has the df S(α, β; 0). The support of S(α, β; 0) is the real line, if −1 < β < 1. The dfs S(α, 1; 0) and S(α, −1; 0) have the supports (− tan(πα/2), ∞) and (−∞, tan(πα/2)), respectively. Moreover, S(1/2, 1, 1, 1; 0) is the L´evy df, as deﬁned by (6.18). The tails of most stable laws are Pareto–like: when β ∈ (−1, 1], the tail probability and density satisfy as x → ∞, P (X > x) f (x)

∼ cα (1 + β)x−α , ∼ αcα (1 + β)x−(α+1) ,

(6.26)

where cα = Γ(α) sin(πα/2)/π. (The β = −1 case decays faster than any power.) This asymptotic power decay has been used to estimate stable parameters, but in most cases one must go extremely far out on the tails to see this tail behavior, e.g., Fofack and Nolan11 and Section 6.5, so this approach is of limited usefulness in practice.

Adding a Skewness Parameter, the Conventional Parameterization We also mention a parameterization which is more commonly used and which is particularly convenient for mathematical proofs (see, e.g., [7] and [46]). Given a 11 Fofack, H. and Nolan, J.P. (1999). Tail behavior, modes and other characteristics of stable distributions. Extremes 2, 39–58.

6.4. Statistics for Sum–Stable Distributions random variable X with df S(α, β; 0) let ⎧

α = 1, ⎨ γ X + β tan(πα/2) + δ, if Y =

⎩ γ X + (2/π)β log(γ) + δ, α=1

177

(6.27)

for parameters γ > 0 and δ. The pertaining dfs are denoted by Conventional Parameterization:

S(α, β, γ, δ; 1).

Notice that γ and δ are scale and location parameters if α = 1. The parameter δ is a location parameter for the dfs S(α, β, γ, 0; 1). If β = 0, then the continuous and convential parameterizations coincide. According to (6.20) and (6.25) the pertaining characteristic functions are ⎧

απ α α ⎪ sign(t) + iδt α = 1, exp − γ |t| 1 − iβ tan ⎪ 2 ⎨ if (6.28) χY (t) = ⎪

⎪ ⎩ exp − γ|t| 1 + iβ 2 sign(t) log(|t|) + iδt α = 1. π This parameterization is not continuous at α = 1 and, therefore, less useful for statistical inference. The reader is cautioned that several other parameterizations are used for historical and technical reasons.

Scale Mixtures of Normal Distributions As in the case of Student distributions one may represent symmetric, sum-stable distributions as scale mixtures of normal distributions. Now, the mixing df is the sum–stable df with skewness parameter β = 1 and index α < 1. Let X and Y be independent random variables, where X is standard normal and Y has the df S(α/2, 1, 1, 0; 1) for some α < 2. Notice that Y has the support (0, ∞). Then, (6.29) Y 1/2 X has the df S(α, 0, γ, 0; 1), where γ = 2−1/2 sec(πα/4)1/α with sec(x) = 1/ cos(x) denoting the secant function. For example, if Y is the L´evy random variable, having the index α = 1/2, then the scale mixture is the Cauchy df. This construction will be of importance in the multivariate setup for the characterization of multivariate sum–stable, spherically or elliptically contoured dfs, see Section 11.4.

Estimating Stable Parameters For estimating the four parameters in the S(α, β, σ, µ; 0)–parameterization several methods are applicable. We mention

178

6. Advanced Statistical Analysis

• Quantile Method: McCulloch12 uses ﬁve sample quantiles (with q = 0.05, 0.25, 0.5, 0.75, 0.95) and matches the observed quantile spread with the exact quantile spread in stable distributions. • Empirical Characteristic Function Method: Kogon and Williams13 use the known form of the characteristic function to estimate stable parameters. The empirical/sample characteristic function is computed from the sample X1 , . . . , Xn by

χ(t) ˆ = exp(itXj ) n. j≤n

The sample parameters are estimated by regression techniques from the exact form for χ(t) given in (6.25). • MLE: This method uses initial estimate of (α, β, σ, µ) from the quantile method, and then maximizes the likelihood by a numerical search in the 4–dimensional parameter space. Large sample conﬁdence interval estimates have been computed, see Nolan14 . The estimated parameters may be converted to the conventional parameterization.

Diagnostics with Kernel Densities In principle, it is not surprising that one can ﬁt a data set better with the 4 parameter stable model than with the 2 parameter normal model. The relevant question is whether or not the stable ﬁt actually describes the data well. The diagnostics we are about to discuss are an attempt to detect non– stability. As with any other family of distributions, it is not possible to prove that a given data set is or is not stable. The best we can do is to determine whether or not the data are consistent with the hypothesis of stability. These tests will fail if the departure from stability is small or occurs in an unobserved part of the range. The ﬁrst step is to do a smoothed density plot of the data. If there are clear multiple modes or gaps in the support, then the data cannot come from a stable distribution. For density plots, we smoothed the data with the Epanechnikov or a Gaussian kernel with standard deviation given by a width parameter. In addition to the automatic choice we used trial and error to ﬁnd a width parameter that was 12 McCulloch, J.H. (1986). Simple consistent estimators of stable distribution parameters. Commun. Statist. Simulations 15, 1109–1136. 13 Kogon,

S.M. and Williams, D.B. (1998). Characteristic function based estimation of stable distribution parameters. In: A Practical Guide to Heavy Tails, R.J. Adler et all (eds.), Birkh¨ auser, Basel, 311-335. 14 Nolan,

J.P. (2001). Maximum likelihood estimation of stable parameters. In: L´evy Processes, ed. by Barndorﬀ–Nielson, Mikosch, and Resnick, Birkh¨ auser, Basel, 379–400.

6.4. Statistics for Sum–Stable Distributions

179

as small as possible without showing too much oscillations from individual data points. Example 6.4.1. (Distributions of Black Market Exchange Rate Returns.) We examine two data sets of consecutive monthly log-returns (cf. Chapter 16) from Colombia and Argentina15 of a relatively small small sample size of 119 studied by Akgiray et al.16 and further investigated by Koedijk et al.17 . Akgiray et al. estimated parameters of sum– stable and Student distributions for several Latin American exchange rate series. First one must note that these series exhibit the typical properties of ﬁnancial data, namely a certain dependency which becomes visible by periods of tranquility and volatility. This entails that one cannot expect a good performance of estimation procedures. For the Colombia data we estimated a sum–stable distribution S(α, β, σ, µ; 0) = S(1.21, −0.14, 0.0059, 0.0096; 0) and a Student distribution with shape, location and scale parameters α = 1.83, µ = 0.0094 and σ = 0.0072. It is remarkable that in both cases one gets a shape parameter α less that 2. In Fig. 6.4 (left) we plot the estimated sum–stable density and a kernel density based on the Epanechnikov kernel and the width parameter b = 0.007. The estimated Student density can hardly be distinguished from the sum–stable density and is, therefore, omitted. 60

9

8

50

7

6

40

5

30

4

3

20

2 10 0.0 -0.05

1 0.0 -0.03

-0.01

0.01

0.03

Colombia log-returns

0.05

0.07

-0.3

-0.1

0.1

0.3

0.5

Argentina log-returns

Fig. 6.4. Kernel densities and estimated sum–stable densities for Colombia (left) and for Argentina (right) exchange rate data. For the Argentina exchange rate data the ML estimation procedures gives the sum–stable distribution S(α, β, σ, µ; 0) = S(1.093, −0.44, 0.036, 0.0036; 0). This density is strongly skewed to the right. For a continuation of this example see Example 6.4.2. 15 Communicated

by S. Caserta and C.G. de Vries and stored in blackmarket.dat.

16 Akgiray,

V., Booth, G.G. and Seifert, B. (1988). Distribution properties of Latin American black market exchange rates. J. Int. Money and Finance 7, 37–48. 17 Koedijk, K.G., Stork, P.A. and Vries, de C.G. (1992). Diﬀerences between foreign exchange rate regimes: the view from the tail. J. Int. Money and Finance 11, 462-473.

180

6. Advanced Statistical Analysis

The density plots give a good sense of whether the ﬁt matches the data near the mode of the distribution, but generally they are uninformative on the tails where both the ﬁtted density and the smoothed data density are small.

Diagnostics with Q–Q Plots If the smoothed density is plausibly stable, proceed with a stable ﬁt and compare the ﬁtted distribution with the data using Q–Q and P–P plots and more reﬁned statistical tools coming from extreme value analysis. We observed practical problems with Q–Q plots for heavy tailed data. While using Q–Q plots to compare simulated stable data sets with the exact corresponding cumulative df, we routinely had two problems with extreme values: (1) most of the data is visually compressed to a small region and (2) on the tails there seems to be an unacceptably large amount of ﬂuctuation around the theoretical straight line. For heavy tailed stable distributions we should expect such ﬂuctuations: if Xi:n is the ith order statistic from an iid stable sample of size n with common df F , q = (i − 1/2)/n and F −1 (q) is the q–quantile, then for n large, the distribution of Xi:n is approximately normal with expectation EXi:n ≈ F −1 (q) and variance V (Xi:n ) ≈ q(1 − q)/nf (F −1 (q))2 . The point is that Q–Q plots may appear non–linear on the tails, even when the data set is stable.

Diagnostics with Trimmed Mean Excess Functions One should be aware that the mean excess function does not exist, if the tail index α of the underlying df is smaller than 1. In addition, the sample mean excess function provides an inaccurate estimator, if α ≤ 1.5. Therefore, we employ trimmed mean excess functions, cf. Section 2.2, in the subsequent analysis. In conjunction with sum–stable dfs there is another diﬃculty, namely that the constant in the remainder term of the Pareto approximation is large for α close to 2, see (6.24). One cannot expect that linearity in the upper tail of the underlying trimmed mean excess function becomes clearly visible in the sample version. In Fig. 6.5 we plot the underlying trimmed mean excess function with trimming factor p = 0.8—simulated under the gigantic sample size of 100,000 data—for standard, symmetric sum–stable dfs with parameters α = 1.5 and α = 1.8, and in both cases three diﬀerent sample trimmed mean excess functions for sample sizes n = 1000. For the parameter α = 1.5 (respectively, α = 1.8) the linearity of the “theoretical” trimmed mean excess function becomes visible beyond the threshold u = 1.5 (u = 2.5) which corresponds to the 85% quantile (95% quantile). This indicates

181

4

4

3

3

trimmed mean excess

trimmed mean excess

6.4. Statistics for Sum–Stable Distributions

2

1

2

1

0.0

0.0 1

0

2

3

5

4

0

6

1

2

3

4

5

6

threshold

threshold

Fig. 6.5. “Theoretical” trimmed mean excess functions (solid) and sample versions (dotted) based on n = 1000 simulated data for the parameter α = 1.5 (left) and α = 1.8 (right).

why larger sample sizes are required to detect the linearity in the upper tail of the trimmed mean excess function, if α is close to 2. Example 6.4.2. (Continuation of Example 6.4.1.) The following considerations concern the Argentina exchange rate data which were studied in Example 6.4.1. Recall that the estimated sum-stable distribution was S(α, β, σ, µ; 0) = S(1.093, −0.44, 0.036, 0.0036; 0). In Fig. 6.6 we plot the sample trimmed mean excess function with trimming factor 0.8 and the “theoretical” trimmed mean excess function simulated under the estimated parameters (under the Monte Carlo sample size of 50,000).

trimmed mean excess

0.2

0.1

Fig. 6.6. Sample trimmed mean excess function based on Argentina exchange rate data and “theoretical” trimmed mean excess function. 0

0.1

0.2

0.3

threshold

The number of data above the threshold u = 1.3 is k = 24. The MLE and moment estimates in the full Pareto model based on the 24 largest data are around α = 2. This also conﬁrms that there is a distribution with a very heavy tail.

182

6. Advanced Statistical Analysis

The overall impression from the analysis of data and of simulations is that upper tails of sum–stable dfs can be successfully analyzed by sample trimmed mean excess functions, if α is not too close to 2 and the sample size is suﬃciently large.

6.5

Ultimate and Penultimate GP Approximation co–authored by E. Kaufmann18

From this section some theoretical insight can be gained why the modeling of dfs of maxima or exceedances by means of EV or GP dfs leads to inaccurate results in certain cases although the underlying df F belongs to the max or pot–domain of attraction of an EV or GP df. This question is handled by computing remainder terms in the limit theorems (1.27) and (1.46) for dfs of maxima and exceedance dfs. This book is devoted to exceedances to some larger extent and, therefore, we focus our attention on the approximation to exceedance dfs in order not to overload this section. Our arguments are closely related to those in [16], pages 11–45. At the beginning we start with some explanations about the relationship between the pot–stability of GP dfs and the concept of regularly varying functions. In the second part of this section one may ﬁnd some results about von Mises bounds for such approximations.

The POT–Stability and Regularly Varying Functions In the following lines, we merely study the case of Pareto dfs W1,α,µ,σ in the α– parametrization. Similar results hold for GP dfs in general. From (1.44) we know that for exceedance dfs of Pareto dfs the relation [u]

W1,α,µ,σ (x) = W1,α,µ,u−µ (x),

x ≥ u,

holds for thresholds u > µ + σ, which is the pot–stability of Pareto dfs. Recall from (1.12) that for any df F , F [u](x) = F (x)/F (u),

x ≥ u,

where F is the survivor function of F . Rewriting the pot–stability of Pareto dfs F = W1,α,µ,σ in terms of survivor functions and replacing x by ux, one gets x − µ/u −α F (ux)/F (u) = F [u](ux) = 1 − µ/u →u→∞ x−α , 18 University

of Siegen.

x ≥ 1.

(6.30)

6.5. Ultimate and Penultimate GP Approximation

183

In the special case of F = W1,α,0,σ —this is the case of a Pareto df with location parameter µ = 0—we have equality in (6.30), that is, F (ux)/F (u) = x−α ,

x > 1,

(6.31)

holds. This indicates that pot–stability is closely related to the property that the survivor function F is regularly varying at ∞. Generally, a measurable function U : (0, ∞) → (0, ∞) is called regularly varying at inﬁnity with index (exponent of variation) ρ, if U (tx)/U (t) →t→∞ xρ ,

x > 0,

(6.32)

see, e.g., [44], Section 0.4. The canonical ρ–varying function is U (x) = xρ . If ρ = 0, then U is called slowly varying. One speaks of regularly varying at zero if (6.32) holds with t → ∞ replaced by t ↓ 0. Recall from Section 1.3, page 19, that a df F belongs to the max–domain of attraction of the EV df Gγ with γ > 0 if, and only if, ω(F ) = ∞ and the survivor function F is regularly varying at ∞ with index ρ = −1/γ. If F = W1,α,µ,σ is a Pareto df with location parameter µ = 0, then condition (6.32) is satisﬁed for F with ρ = −α, yet the rate is exceedingly slow if α is a larger index. In the following lines we make this remark more precise by computing remainder terms.

Computing the Remainder Term in the GP Approximation We start with a condition imposed on the survivor function F = 1 − F of a df F under which the remainder term of the approximation in (1.46) of an exceedance df F [u] by means of a GP df W can be calculated easily. Our interest is primarily focused on GP dfs, yet the subsequent formulas (6.33) to (6.37) are applicable to any df W as an approximate df. Assume that 1/δ (6.33) F (x) = W(x) 1 + O W (x) holds19 for some δ > 0. Thus, F is close to the df W in the upper tail. If this condition holds, we say that a df F belongs to the δ–neighborhood of the df W . Notice that the remainder term is small if δ is small. In addition, we have ω(F ) ≤ ω(W ) for the right–hand endpoints of the supports of F and W . Condition (6.33), with W being a GP df, is satisﬁed for δ = 1 by many of the distributions mentioned in this book such as Fr´echet, Weibull, Gumbel, generalized Cauchy, Student, Burr and sum–stable distributions with α < 2 and various mixtures. Straightforward calculations show that the relation 1/δ [u] u ≤ x < ω(F ), (6.34) F (x) − W [u] (x) = O W (u) , 19 This

condition can be attributed to L. Weiss (1971), see the article cited on page 134.

184

6. Advanced Statistical Analysis

holds uniformly over u for the exceedance dfs of F and W . A special case was mentioned in (1.48). Recall that the exceedance df W [u] of a GP df W is again a GP df (which is the pot–stability of GP dfs). Also, a df belongs to the pot–domain of attraction of a GP df, if it belongs to the δ–neighborhood of a GP df. Condition (6.33) reformulated in terms of densities is 1/δ (6.35) f (x) = w(x) 1 + O W (x) . By integration one obtains that (6.35) implies (6.33). In addition, simple calculations yield that 1/δ u ≤ x < ω(F ), (6.36) f [u] (x) = w[u] (x) 1 + O W (u) , holds for the exceedance densities f [u] and w[u] uniformly in the thresholds u. In Section 9.4 we apply a reformulation of (6.36) in terms of the Hellinger distance (introduced in (3.4)). (6.36) implies 1/δ

(6.37) H f [u] , w[u] = O W (u) , where H is the Hellinger distance between f [u] and w[u] . Approximations to actual distributions of exceedances or maxima can still be satisfactorily accurate for small sample sizes, if the constant in the remainder term is small, with hardly any improvement when the sample size increases. For a longer discussion see [42], pages 172–175.

Comparing the Tail Behavior of Certain Pareto Distributions We also want to discuss the poor performance of the Hill estimator, as illustrated in Figure 5.2 (left), by computing a reﬁnement of (6.33). The Hill estimator is an MLE in the GP1(u, µ = 0) model, where the location parameter µ is equal to zero. If µ = 0, then it is well known that the Hill estimator is still consistent (as outlined in Section 5.1). We compare the tail behavior of Pareto dfs W1,α,µ,σ with location parameter µ = 0 to that for µ = 0. For that purpose, an expansion of length 2 is computed. By applying a Taylor expansion one gets 2/α αµ 1/α W 1,α,0,σ (x) + O W 1,α,0,σ (x) . (6.38) W 1,α,µ,σ (x) = W 1,α,0,σ 1 + σ We see that Pareto dfs with µ = 0 belong to the δ–neighborhood of a Pareto df with µ = 0, yet δ = α can be large which yields a large remainder term in the approximation. This indicates that estimators of the shape parameter α, which are especially tailored for the GP1(u, µ = 0) model such as the Hill estimator, are inaccurate, if the parameters α is large. Of course, the constant µ/σ is important as well.

6.5. Ultimate and Penultimate GP Approximation

185

A stronger deviation of the actual distribution from the GP1(u, µ = 0) model yields a larger bias of the Hill estimator a fact which was already observed by Goldie and Smith20 .

The Hall Condition A reﬁnement of the Weiss condition (6.33), with the factor 1/δ 1 + O W (x) replaced by an expansion 1 + C(1 + o(1))W

1/δ

(x),

(6.39)

is the Hall condition21 . See (6.38) for an example. Another example is provided by (6.23) which is an expansion for sum–stable distributions: the Hall condition holds for γ = 1/α and δ = 1, yet the constant—hidden in the remainder term—is very large if α is close to 2. In terms of densities we get a + o(1))W 1/δ (x) , (6.40) reﬁned δ–neighborhood: f (x) = w(x) 1 + C(1 = C(1 + 1/δ). where C The expansion for sum–stable densities in the book by Christoph and Wolf also includes those with a skewness parameter β = 0. If α = 1, 2, then the sum– stable densities generally satisfy condition (6.35) with δ = 1; if α = 1 and β = 0, then this relation holds for δ = 1 + ε for every ε > 0. Under such a condition the optimal number k of extremes was studied by Hall and Welsh22 . Early results on the bias–correction of estimators were established under this condition. The latter topic will separately be studied in Section 6.6. Such Hall type conditions are also of interest in conjunction with the automatic choice of k (see page 137).

Von Mises Bounds for the Remainder Term in the GP Approximation to Exceedance DFs Conditions (6.33) and (6.35) are not satisﬁed by the normal, log–normal, gamma, Gompertz and converse Weibull distributions, for example. Yet, by using the von 20 See, e.g., Goldie, C.M. and Smith, R.L. (1987). Slow variation with remainder term: A survey of the theory and its applications. Quart. J. Math. Oxford Ser. 38, 45–71. 21 Hall, P. (1982). On estimating the endpoint of a distribution. Ann. Statist. 10, 556– 568. 22 Hall,

P. and Welsh, A.H. (1985). Adaptive estimates of parameters of regular variation. Ann. Statist. 13, 331–341.

186

6. Advanced Statistical Analysis

Mises condition (2.32), one may prove that these distributions belong to the pot– domain of attraction of the exponential df (and, likewise, to the max–domain of attraction of the Gumbel df). We refer to [20], pages 67–68, for the required computations in the case of the log–normal distribution. Subsequently, we make use of the von Mises condition (2.32), which is equivalent to the following 1 − F (F −1 (1 − t)) − γ → 0, t ↓ 0, (6.41) von Mises condition: M (t) := f for some real parameter γ. An upper bound related to that in (6.37) will be determined by the remainder function M . Note that M is independent of location and scale parameters of the df F . Also, • if M = 0, then F is a GP df, • if

M (t) ∼ ct1/δ

as t ↓ 0,

then f satisﬁes condition (6.35) for some GP density w (that is, f belongs to the δ–neighborhood of a GP density w with shape parameter γ). In addition, assume that M (tx) → xρ , M (t)

t ↓ 0,

x > 0,

(6.42)

holds for some ρ ≥ 0. This condition says that the remainder function M is regularly varying at zero, if ρ > 0, and slowly varying at zero, if ρ = 0, see page 183. Note that, (6.42) implies (6.41), if ρ > 0. The case ρ = 0 includes distributions for which poor rates of convergence are ˜ 0 we have γ = 0 and achieved in (6.37). For the standard Gompertz df G M (t) = −(log t)−1 .

(6.43)

Such an order is also achieved by M for normal, log–normal, gamma and converse Weibull dfs. We compute an upper bound for the remainder term in the GP approximation which is related to that in (6.37). Under the conditions (6.41) and (6.42) we have23 H(f [u] , wγ,u,σ(u) ) ∼ C|M (F (u))|, ⎧ ⎨ (1 − F (u))/f (u)

where σ(u) = 23 Kaufmann,

⎩

γ ≥ 0, if

(ω(F ) − u)|γ|

(6.44)

(6.45) γ < 0.

E. and Reiss, R.–D. (2002). An upper bound on the binomial process approximation to the exceedance process. Extremes 5, 253–269.

6.5. Ultimate and Penultimate GP Approximation

187

For a continuation of this topic, within the framework of exceedance processes, we refer to Section 9.4.

Penultimate Modeling By computing remainder terms one is also able to discuss the concept of penultimate distributions. Within EV or GP models one may ﬁnd dfs which are more accurate approximations of the actual df F m or F [u] than the limiting ones. Such EV or GP dfs are called penultimate dfs. Early results of that type are contained in the paper by Fisher and Tippett cited on page 18. Further references concerning the penultimate EV approximation are given at the end of this section. The starting points are the conditions (6.41) and (6.42) which determine an upper bound for the ultimate rate. Under these conditions a penultimate approximation exists if, and only if, M is slowly varying24 . We assume that the von Mises condition (6.41) and condition24 , M (tx) − M (t) → c log x, A(t)

t ↓ 0,

x > 0,

(6.46)

hold, where A : (0, 1) → (0, ∞) is another auxiliary function and c = −1, 1. This condition implies that M and A are slowly varying at 0. Hence, (6.42) holds for M and A with ρ = 0. The rate of convergence in (6.42) is of order A(t)/M (t) which shows that A is of smaller order than M . We compute an upper bound for the remainder term in the penultimate GP approximation which correspond to that in (6.44). Under the conditions (6.41) and (6.46) we have24

(6.47) H(f [u] , wγ(u),u,σ(u) ) ∼ CA F (u) with σ(u) as in (6.45), and γ replaced by γ(u) := γ + M (F (u)).

(6.48)

Recall that M (t) = −(log t)−1 for the Gompertz df. In addition, we have A(t) = (log t)−2 for the second auxiliary function A in this case. The existence of penultimate distributions can have serious consequences for the estimation of GP distributions (and, likewise, for EV distributions) and the interpretation of such results. Example 6.5.1. (Extreme Life Spans.) Our analysis concerns extreme life spans of women born before and around the year 1900 and later living in West Germany. 24 Kaufmann,

3, 39–55.

E. (2000). Penultimate approximations in extreme value theory. Extremes

188

6. Advanced Statistical Analysis

The given data are the ages of female persons at death in West–Germany in the year 199325 . None of the persons died at an age older than 111 years. The analysis is based on the ages at death of 90 or older. Table 6.2. Frequencies of life spans (in years). life span

90

91

92

93

94

95

96

97

98

99

100

frequency 12079 10273 8349 6449 5221 3871 2880 1987 1383 940 579 life span

101

102

103

104

105

106

107

108

109

frequency

340

207

95

63

36

16

9

4

1

110 111 1

1

Gompertz dfs (see page 54) are one of the classical life span dfs. A Gompertz density with location and scale parameters µ = 83.0 and σ = 9.8 ﬁts well to the histogram of the life span data above 95 year. According to (6.43)–(6.45), an exponential df provides an ultimate approximation. The penultimate approach, see (6.47) and (6.48), leads to a beta dfs with γ(u) ↑ 0 as u → ∞. For more details we refer to Section 19.1.

The possibility of a penultimate approximation must also be taken in account when the shape parameter γ(u) varies with the threshold u. Example 6.5.2. (Ozone Cluster Maxima.) We discuss one further aspect of the case study mentioned in Example 5.1.2. In this case we do not have a classical distribution for all of the data in mind. However, for the increasing thresholds u = −0.20, 0.22, 0.24 one obtains as estimates of the shape parameter γ the values γˆ (.20) = −0.41, γˆ (.22) = −.35 and γˆ (.24) = −.33. This indicates the possibility that we estimated penultimate approximations to the actual distribution with the exponential distribution providing an ultimate approximation.

This short discussion underlines the importance of penultimate approximation in extreme value theory. The situation is characterized by the facts that there is a bad approximation rate by means of the ultimate distribution and a slight improvement of the accuracy of the approximation by means of penultimate distributions. The possibility of occurance of penultimate distributions should not be ignored in statistically oriented applications, e.g., in conjunction with speculations about the right endpoint of life–span distribution. 25 Stored

Oﬃce).

in the ﬁle um–lspge.dat (communicated by G.R. Heer, Federal Statistical

6.5. Ultimate and Penultimate GP Approximation

189

The Remainder Term in the EV Approximation To obtain sharp bounds on the remainder term of the EV approximation to the joint distribution of several maxima, one must compute the Hellinger distance between such distributions, see [42] and [16]. Such bounds can be easily computed if F belongs to a δ–neighborhood of a GP distribution. In the literature about probability theory one ﬁnds bounds on the maximum deviation of dfs or, in exceptional cases, for the variational distance between distributions in the case of a single maximum. From the Falk–Marohn–Kaufmann theorem26 , it is known that an algebraic rate of convergence—that is a rate of order O(n−c ) for some c > 0—can be achieved if, and only if, condition (6.33) is satisﬁed. This clariﬁes why one gets inaccurate results in certain cases. For example, the large MSEs in Table 4.2 for normal data can be explained by the fact that the normal distribution does not satisfy condition (6.33). An upper bound, which involves the von Mises condition, was established by Radtke27 . A closely related upper bound may be found in an article by de Haan and Resnick28 . The condition formulated by de Haan and Resnick is better adjusted to approximations of sample maxima. First results concerning the penultimate approximation to distributions of maxima are due to Fisher and Tippett (in the article cited on page 18). These results were considerably extended by Gomes29 . Exact penultimate rates were recently established by Gomes and de Haan30 and in the afore mentioned article by Kaufmann24 .

26

Falk, M. and Marohn, F. (1993). Von Mises conditions revisited. Ann. Probab. 21, 1310–1328, and Kaufmann, E. (1995). Von Mises conditions, δ–neighborhoods and rates of convergence for maxima. Statist. Probab. Letters 25, 63–70. 27 Radtke,

M. (1988). Konvergenzraten und Entwicklungen unter von Mises Bedingungen der Extremwerttheorie. Ph.D. Thesis, University of Siegen, (also see, e.g., [42], page 199). 28 de Haan, L. and Resnick, S.I. (1996). Second order regular variation and rates of convergence in extreme value theory. Ann. Probab. 24, 97-124. 29 Gomes,

M.I. (1984). Penultimate limiting forms in extreme value theory. Ann. Inst. Statist. Math. 36, Part A, 71–85, and Gomes, M.I. (1994). Penultimate behaviour of the extremes. In [15], Vol. 1, 403–418. 30 Gomes,

M.I. and Haan, L. de (1999). Approximation by penultimate extreme value distributions. Extremes 2, 71–85.

190

6.6

6. Advanced Statistical Analysis

An Overview of Reduced–Bias Estimation co–authored by M.I. Gomes31

The semi–parametric estimators of ﬁrst order parameters of extreme or even rare events—like the tail index, the extremal index, a high q–quantile, a return period of a high level, and so on—may be based on the k top order statistics Xn−i+1:n , i = 1, . . . , k, of iid random variables with common df F . Before dealing with second order parameters, which are decisive for the bias reduction, we recall some basic facts about the asymptotic theory for heavy tails in the ﬁrst order framework. Next, we formulate a basic condition for the second order framework, and • introduce the concept of bias reduction; • provide details about the jackknife methodology; • study an approximate maximum likelihood approach, together with the introduction of simple bias–corrected Hill estimators, • provide an application to data in the ﬁeld of ﬁnance. This section is concluded with remarks about some recent literature on bias reduction.

The First Order Framework Revisited The estimators for an extreme events’ parameter, say η, are consistent if the df F is in the domain of attraction of an EV df Gγ , and k is intermediate, i.e., k = kn → ∞ and k = o(n) as n → ∞.

(6.49)

We shall assume here that we are working with heavy tails and, thus, with shape parameters γ > 0 in the uniﬁed model. Then, according to (1.29), a df F is in the max–domain of attraction of Gγ if, and only if, for every x > 0, F (tx)/F (t) →t→∞ x−1/γ , or equivalently, U (tx)/U (t) →t→∞ xγ ,

(6.50)

where F = 1 − F is the survivor function, and U (t) = F −1 (1 − 1/t) for t ≥ 1. Thus, according to (6.32), the survivor function is regularly varying at inﬁnity with a negative index −1/γ, or equivalently, U is of regular variation with index γ. We shall here concentrate on these Pareto–type distributions, for which (6.50) holds. 31 University

of Lisbon, this research was partially supported by FCT/POCTI and POCI/FEDER.

6.6. An Overview of Reduced–Bias Estimation

191

A Second Order Condition and a Distributional Representation of the Estimators Under the ﬁrst order condition (6.50), the asymptotic normality of estimators for an extreme events’ parameter η is attained whenever we assume a second order condition, i.e., when we assume to know the rate of convergence towards zero of, for instance, log U (tx) − log U (t) − γ log x, as t → ∞. Such a second order condition may be written as xρ − 1 log U (tx) − log U (t) − γ log x →t→∞ , A(t) ρ

(6.51)

where ρ ≤ 0 and A(t) → 0 as t → ∞. More precisely, |A(tx)/A(t)| →t→∞ xρ

for all x > 0;

that is, |A| is regularly varying at inﬁnity with index ρ. For any classical semi–parametric estimator ηn,k , which is consistent for the estimation of the parameter η, and under the second order condition (6.51), there exists a function ϕ(k), converging towards zero as k → ∞, such that the following asymptotic distributional representation d

ηn,k = η + σϕ(k)Pk + bρ A(n/k) (1 + op (1)) ,

(6.52)

holds (thus, we have equality in distribution with one term converging to zero in probability). Here the Pk are asymptotically standard normal random variables, σ > 0, bρ is real and = 0, and A(·) the function in (6.51). We may thus provide approximations to the variance and the bias of ηn,k 2 given by (σϕ(k)) and bρ A(n/k), respectively. Consequently, these estimators exhibit the same type of peculiarities: • high variance for high thresholds Xn−k:n , i.e., for small values of k; • high bias for low thresholds, i.e., for large values of k; • a small region of stability of the sample path (plot of the estimates versus k as it is done in Fig. 5.3), as a function of k, making problematic the adaptive choice of the threshold, on the basis of any sample paths’ stability criterion; • a “very peaked” mean squared error, making diﬃcult the choice of the value k0 where the mean squared error function MSE(ηn,k ) attains its minimum.

The Concept of Reduced–Bias Estimators The preceding peculiarities have led researchers to consider the possibility of dealR ing with the bias term in an appropriate manner, building new estimators ηn,k , the so–called reduced–bias estimators.

192

6. Advanced Statistical Analysis

Under the second order condition (6.51) and for k intermediate, i.e., whenever R , a consistent estimator of a functional of extreme (6.49) holds, the statistic ηn,k events η = η(F ), based on the k top order statistics in a sample from a heavy tailed df F , is said to be a reduced–bias semi–parametric estimator of η, whenever d

R ηn,k = η + σR ϕ(k)PkR + op (A(n/k)),

(6.53)

where the PkR are asymptotically standard normal and σR > 0, with A(·) and ϕ(·) being the functions in (6.51) and (6.52). Notice that for the reduced–bias estimators in (6.53), we no longer have a dominant component of bias of the order of A(n/k), as in (6.52). Therefore, √ R

k ηn,k − η √ is asymptotically normal with null mean value √ not only when k A(n/k) → 0 (as for the classical estimators), but also when k A(n/k) → λ, ﬁnite and non–null. Such a bias reduction provides usually a stable sample path for a wider region of k–values and a reduction of the mean squared error at the optimal level. Such an approach has been carried out in the most diversiﬁed manners, and from now on we shall restrict ourselves to the tail index estimation, i.e., we shall replace the√generic parameter η by the tail index γ, in (6.50). As a consequence, ϕ(k) = 1/ k. The key ideas are either to ﬁnd ways of getting rid of the dominant component bρ A(n/k) of bias in (6.52), or to go further into the second order behavior of the basic statistics used for the estimation of γ, like the log–excesses or the scaled log–spacings.

Historical Remarks We mention some pre–2000 results about bias–corrected estimators in extreme value theory. Such estimators may be dated back to Reiss32 , Gomes33 , Drees34 and Peng35 , among others. Gomes uses the Generalized Jackknife methodology in Gray and Schucany [23], and Peng deals with linear combinations of adequate tail index estimators, in a spirit quite close to the one associated to the Generalized Jackknife technique. 32 Reiss, R.-D. (1989). Extreme value models and adaptive estimation of the tail index. In [14], 156–165. 33 Gomes, M.I. (1994). Metodologias Jackknife e Bootstrap em Estat´ ıstica de Extremos. In Mendes-Lopes et al. (eds.), Actas II Congresso S.P.E., 31–46. 34 Drees, H. (1996). Reﬁned Pickands estimators with bias correction. Comm. Statist. Theory and Meth. 25, 837–851. 35 Peng,

L. (1998). Asymptotically unbiased estimator for the extreme–value index. Statist. Probab. Letters 38, 107–115.

6.6. An Overview of Reduced–Bias Estimation

193

The latter technique was also used in Martins et al.36 , where convex mixtures of two Hill estimators, computed at two diﬀerent levels, are considered. Within the second order framework, Beirlant et al.37 and Feuerverger and Hall38 investigate the accommodation of bias in the scaled log–spacings and derive approximate “maximum likelihood” and “least squares” reduced–bias tail index estimators.

The Jackknife and Related Methodologies First we provide some details about the Jackknife methodology, due to J. Tukey. This is a nonparametric resampling technique, essentially in the ﬁeld of exploratory data analysis, whose main objective is the reduction of bias of an estimator, by means of the construction of an auxiliary estimator based on B. Quenouille’s resampling technique, and the consideration of a suitable combination of the two estimators. The Generalized Jackknife statistics of Gray and Schucany [23] are more generally based on two diﬀerent estimators of the same functional, with similar bias properties. More precisely, and as a particular case of the Jackknife theory, if (1) (2) we have two diﬀerent biased consistent estimators ηn and ηn of the functional (2) (1) parameter η(F ), such that E ηn = η + ϕ(η) d1 (n) and E ηn = η + ϕ(η) d2 (n), then, denoting by (1) BIAS ηn d1 (n) , qn := (2) = d 2 (n) BIAS ηn (1) (2) the Generalized Jackknife statistic associated to ηn , ηn is

ηn(1) − qn ηn(2) , ηnG ηn(1) , ηn(2) = 1 − qn which is an unbiased consistent estimator of η(F ), provided that qn = 1 for all n.

Generalized Jackknife Estimators of the Tail Index Whenever we are dealing with semi–parametric estimators of the tail index, or even other parameters of extreme events, we have usually information about the asymptotic bias of these estimators. We may thus choose estimators with similar asymptotic properties, and build the associated Generalized Jackknife statistic. 36 Martins, M.J., Gomes, M.I. and Neves, M. (1999). Some results on the behavior of Hill estimator. J. Statist. Comput. and Simulation 63, 283–297. 37 Beirlant, J., Dierckx, G., Gogebeur, Y. and Matthys, G. (1999). Tail index estimation and an exponential regression model. Extremes 2, 177–200. 38 Feuerverger,

A. and Hall, P. (1999). Estimating a tail exponent by modelling departure from a Pareto distribution. Ann. Statist. 27, 760–781.

194

6. Advanced Statistical Analysis

This methodology has ﬁrst been used by Martins et al., as noted above, and still later on, in Gomes et al.39 . These authors suggest several Generalized Jackknife estimators of the tail index γ. We shall here refer only to the one based on the classical Hill estimator for γ, namely (1)

γn,k :=

1 log Xn−i+1:n − log Xn−k:n , k

(6.54)

i≤k

cf. (5.3), and on the alternative estimator (2)

(2)

γn,k :=

Mn,k (1)

,

2Mn,k

where, related to the lj,k with a ﬁxed threshold on page 134, (j)

Mn,k :=

1

(log Xn−i+1:n − log Xn−k:n )j , k

j ≥ 1.

(6.55)

i≤k

(1)

(2)

Under the second order condition (6.51), and with Pk and Pk asymptotically standard normal random variables, we have individually and jointly the validity of the distributional representations (1)

γn(1) (k) γn(2) (k)

γP A(n/k) d + op (A(n/k)), = γ + √k + 1−ρ k √ (2) 2 γPk A(n/k) d √ + + op (A(n/k)), = γ+ (1 − ρ)2 k

(6.56) (6.57)

where one may choose (1) Pk

√

(2) ηi /k − 1 and Pk = = k i≤k

√ √ 2 k 2 (1) ηi /k − 2 − Pk , 2 2 i≤k

with ηi , i ≥ 1 being iid standard exponential random variables. Consequently, (1) (2) √ = 2/2. Cov Pk , Pk (1)

(2)

The ratio between the dominant components of bias of γn,k and γn,k is equal to 1 − ρ, and we thus get the Generalized Jackknife estimator (1) (2) GJ (6.58) := γn,k − (1 − ρ) γn,k /ρ, γρ,k 39 Gomes, M.I., Martins, M.J. and Neves, M. (2000). Alternatives to a semi–parametric estimator of parameters of rare events—the Jackknife methodology. Extremes 3, 207– 229, and Gomes, M.I., Martins, M.J. and Neves, M. (2002). Generalized Jackknife semi– parametric estimators of the tail index. Portugaliae Mathematica 59, 393–408.

6.6. An Overview of Reduced–Bias Estimation

195

where ρ must still be replaced by an estimator ρˆ. Note that this estimator is exactly the estimator studied by Peng, cf. page 192, who claimed that no good estimator for the second order parameter ρ was then available, and considered a new ρ–estimator, alternative to the ones in Feuerverger and Hall, cf. page 193, Beirlant et al.40 and Drees and Kaufmann, cf. page 138. We formulate two asymptotic results for the estimator in (6.58). • Under the second order condition (6.51) and k intermediate, ' γPkGJ 2ρ2 − 2ρ + 1 GJ d √ + op (A(n/k)), γρ,k = γ + |ρ| k

(6.59)

where PkGJ is an asymptotically standard normal random variable. This reGJ sult comes directly from the expression of γρ,k , together with the distributional representations in (6.56) and (6.57). • The result in (6.59) remains true for the Generalized Jackknife estimator GJ in (6.58) with ρ replaced by ρˆ, provided that ρˆ − ρ = op (1) for all k γρ,k ˆ √ on which we base the tail index estimation, i.e., whenever k A(n/k) → λ, √ GJ − γ is asymptotically ﬁnite. For these values of k, we have that k γρ,k ˆ normal with mean zero and variance 1 − ρ 2 2 . (6.60) σGJ = γ2 1 + ρ This result comes from the fact that (2)

(1)

GJ γn,k − γn,k √

dγρ,k = = Op 1/ k + Op A(n/k) , 2 dρ ρ

and

√ GJ d GJ = γρ,k (k) + ρˆ − ρ Op 1/ k + Op A(n/k) (1 + op (1)). γρ,k ˆ

(6.61)

A closer look at (6.61) reveals that it does not seem convenient to compute ρˆ at the same level k we use for the √ tail index estimation. Indeed, if we do that,

and since we can have ρˆ − ρ = Op 1/ k A(n/k) , we are going to have a change in the asymptotic variance of √ the tail index estimator, because (ˆ ρ − ρ) A(n/k) is then a term of the order of 1/ k. Gomes et al., see the Extremes–article mentioned on page 194, have indeed suggested the misspeciﬁcation of ρ at ρ = −1, and the consideration of the estima(2) (1) GJ := 2 γn,k − γn,k which is a reduced–bias estimator, in the sense herewith tor γn,k deﬁned, i.e., in the sense of (6.53), if and only if ρ = −1. This was essentially due to the high bias and variance of the existing estimators of ρ at that time, together with the idea of considering ρˆ = ρˆk . 40 Beirlant,

J., Vynckier, P. and Teugels, J.L. (1996). Excess function and estimation of the extreme–value index. Bernoulli 2, 293–318.

196

6. Advanced Statistical Analysis

The Estimation of ρ We shall consider here special members of the class of estimators of the second order parameter ρ proposed by Fraga Alves et al.41 Under adequate general conditions, they are semi–parametric asymptotically normal estimators of ρ, whenever ρ < 0, which show highly stable sample paths as functions of k, the number of top order statistics used, for a wide range of large k–values. Such a class of estimators is parameterized by a tuning real parameter τ , and may be deﬁned as, (τ ) (τ ) ρˆτ,k := − 3(Tn,k − 1)/(Tn,k − 3) , where

(τ )

Tn,k :=

⎧ ⎪ ⎪ ⎪ ⎪ ⎪ ⎨

τ /2 (2) − Mn,k /2 τ /2 τ /3 (2) (3) − Mn,k /6 Mn,k /2

(1)

Mn,k

⎪ ⎪ ⎪ ⎪ ⎪ ⎩

1 2

(6.62)

τ

(2) (1) log Mn,k − 21 log Mn,k /2 (2) (3) log Mn,k /2 − 31 log Mn,k /6

if

τ = 0,

if

τ = 0,

(j)

with Mn,k given in (6.55). We shall here summarize a few results proved in Fraga Alves et al., now related to the asymptotic behavior of the estimators of ρ in (6.62): √ • For ρ < 0, if (6.49) and (6.51) hold, and if k A(n/k) → ∞, as n → ∞, the statistic ρˆτ,k in (6.62) converges in probability towards ρ, as k → ∞, for any real τ . • Under additional restrictions on k related to √

a third order framework which is not discussed here, k A(n/k) ρˆτ,k − ρ is asymptotically normal with mean zero and variance σρ2 =

γ(1 − ρ)3 ρ

2

2

2ρ − 2ρ + 1 .

• For large levels k1 , of the type k1 = [n1− ] with > 0 small, and for a large class of heavy tailed models, we can guarantee that,

ρˆτ,k1 − ρ log n = op (1) as n → ∞. 41 Fraga

Alves, M.I., Gomes, M.I. and de Haan, L. (2003). A new class of semi– parametric estimators of the second order parameter. Portugaliae Mathematica 60, 193– 213.

6.6. An Overview of Reduced–Bias Estimation

197

The Estimation of ρ in Action The theoretical and simulated results in the above mentioned article by Fraga Alves et al., as well as further results in Caeiro et al.42 , lead to the proposal of the following algorithm for the ρ–estimation: Algorithm for ρ–estimation. 1. Consider any level k1 = min n − 1, [n1− ] + 1 ,

with small, say = 0.05.

(6.63)

2. Given a sample (X1 , X2 , . . . , Xn ), plot, for τ = 0 and τ = 1, the estimates ρˆτ,k in (6.62), 1 ≤ k < n. 3. Consider {ˆ ρτ,k }k∈K , for large k, say k ∈ K = n0.995 , n0.999 , and compute their median, denoted χτ . Next choose the tuning parameter ⎧ 2 2 ρ0,k − χ0 ) ≤ k∈K (ˆ ρ1,k − χ1 ) , ⎨ 0 if k∈K (ˆ τ := ⎩ 1 otherwise. A few comments: • Step 3 of the algorithm leads in almost all situations to the tuning parameter τ = 0 whenever |ρ| ≤ 1 and τ = 1, otherwise. Such a expert’s guess usually provides better results than a possibly “noisy” estimation of τ , and is highly recommended in practice. For details on this and similar algorithms for the ρ–estimation, see Gomes and Pestana43. The choice of the level k1 in (6.63), and the ρ–estimator (τ ) 3 T − 1 n,k1 0 if ρ ≥ −1, , k1 = n0.995 , τ = ρˆτ 1 := − (τ ) 1 if ρ < −1, −3 T n,k1

(6.64) is a sensible one. • It is however possible to consider in Steps 2 and 3 of the algorithm a set T of τ –values larger than the set T = {0, 1}, to draw sample paths of ρˆτ,k in (6.62) for τ ∈ T , as functions of k, selecting the value of τ which provides higher stability for large k, by means of any stability criterion. A possible 2 ρτ,k − χτ ) . choice on the lines of the algorithm is thus τ ∗ := arg minτ k∈K (ˆ 42 Caeiro, F., Gomes, M.I. and Pestana, D. (2005). Direct reduction of bias of the classical Hill estimator. Revstat 3, 111–136. 43 Gomes,

M.I. and Pestana, D. (2004). A simple second order reduced–bias’ tail index estimator. J. Statist. Comp. and Simulation, in press.

198

6. Advanced Statistical Analysis

Representations of Scaled Log–Spacings Let us consider the representations of scaled log–spacings Ui := i (log Xn−i+1:n − log Xn−i:n ) ,

1 ≤ i ≤ k.

which are useful for the bias reduction and of interest in its own right. Under the second order condition (6.51), and for ρ < 0, Beirlant et al., cf. page 193, motivated the following approximation for the scaled log–spacings: (6.65) Ui ∼ γ + A(n/k) (i/k)−ρ ηi , 1 ≤ i ≤ k, where ηi , i ≥ 1, denotes again a sequence of iid standard exponential random variables. In the same context, Feuerverger and Hall, cf. page 193, considered the approximation, −ρ Ui ∼ γ exp A(n/k) (i/k) /γ ηi = γ exp (A(n/i)/γ) ηi , 1 ≤ i ≤ k. (6.66) The representation (6.65), or equivalently (6.66), has been made more precise, in the asymptotic sense, in Beirlant et al.44 , in a way quite close in spirit to the approximations established by Kaufmann and Reiss45 and Drees et al.46 .

The Hall Condition, Again We shall here further assume just as in Feuerverger and Hall, cf. page 193, that we are in Hall’s class of Pareto–type models, with a survivor function

as x → ∞, F (x) = Cx−1/γ 1 + Dxρ/γ + o xρ/γ C > 0, D real, ρ < 0. Notice that this condition is (6.39) with W(x) = Cx−1/γ and ρ = −1/δ. Then, (6.51) holds and we may choose A(t) = αtρ =: γβtρ ,

β real,

ρ < 0.

(6.67)

The Maximum Likelihood Estimation Based on the Scaled Log–Spacings The use of the approximation in (6.66) and the joint maximization in γ, β and ρ of the approximate log–likelihood of the scaled log–spacings, i.e., of

1 −β(i/n)−ρ −ρ e Ui , (i/n) − log L(γ, β, ρ; Ui , 1 ≤ i ≤ k) = −k log γ − β γ i≤k

i≤k

44 Beirlant, J., Dierckx, G., Guillou, A. and Stˇ aricˇ a, C. (2002). On exponential representations of log–spacings of extreme order statistics. Extremes 5, 157–180. 45 Kaufmann, E. and Reiss, R.–D. (1998). Approximation of the Hill estimator process. Statist. Probab. Letters 39, 347–354. 46 Drees,

H., de Haan, L. and Resnick, S.I. (2000). How to make a Hill plot. Ann. Statist. 28, 254–274.

6.6. An Overview of Reduced–Bias Estimation

199

led A. Feuerverger and P. Hall, cited on page 193, to an explicit expression for γˆ , as a function of βˆ and ρˆ, given by FH

:= γˆ = γˆβ, ˆ ρ,k ˆ

−ρ ˆ 1 −β(i/n) ˆ e Ui . k

(6.68)

i≤k

H Then, βˆ = βˆkF H and ρˆ = ρˆF are numerically obtained, through k

−β(i/n)−ρ −ρ 1 ˆ ρˆ) := arg min log 1 . + β e U (i/n) (β, i k k (β,ρ)

i≤k

(6.69)

i≤k

If (6.49) and the second order condition (6.51) hold, it is possible to state the following results. • If we assume ρ to be known, d

FH = γ+γ γβ,ρ,k ˆ

1 − ρ Γ √k + op (A(n/k)), ρ k

where Γk is asymptotically standard normal. • If ρ is unknown as well as β, as usually happens, and they are both estimated through (6.69), then d

FH = γ+γ γβ, ˆ ρ,k ˆ

1−ρ ρ

2

Γ∗ √k + op (A(n/k)) k

holds, where Γ∗k is an asymptotically standard normal random variable. √ • Consequently, even when k A(n/k) → λ, non–null, we have an asymptotic normal behavior for the reduced–bias tail index estimator, with a null asymptotic bias, but at the expenses of a large asymptotic variance, ruled 4 2 2 provided in (6.60). for |ρ| < 3.676, with σGJ by σF2 H = γ 2 ((1 − ρ)/ρ) > σGJ √ FH

− γ is asymptotically normal wit mean zero and variance Indeed, k γβ, ˆ ρ,k ˆ σF2 H = γ 2

1 − ρ 4 ρ

.

(6.70)

A Simpliﬁed Maximum Likelihood Tail Index Estimator and the External Estimation of ρ The ML estimators of β and ρ in (6.69) are the solution of the ML system of equations ˆb10 B ˆ00 − B ˆ00 = 0, ˆ10 = 0 and B ˆ11 − ˆb11 B

200

6. Advanced Statistical Analysis

where for non–negative integers j and l, k ρˆ i l 1 i −j ρˆ ˆbjl ≡ ˆbjl (ˆ log =: cˆjl , ρ) := k n n n i≤k

and k ρˆ

i −j ρˆ −ρ ˆ i l −β(i/n) ˆ ˆ := 1 ˆjl ≡ B ˆ jl (ˆ log Cˆjl . e Ui =: B ρ, β) k n n n i≤k

The ﬁrst ML equation may then be written as,

−ρˆ Ui = γˆ i−ρˆ exp − βˆ i/n i−ρˆ ,

i≤k

i≤k

with γˆ given in (6.68). The use of ex ∼ 1 + x as x → 0, led Gomes and Martins47 to an explicit estimator for β, given by GM := βˆρ,k ˆ

ρˆ cˆ10 Cˆ00 − Cˆ10 k , n cˆ10 Cˆ10 − Cˆ20

1 i −j ρˆ Cˆj0 = Cˆj = Ui , k k

(6.71)

i≤k

and the following approximate maximum likelihood estimator for the tail index γ, GM := γˆρ,k ˆ

ρˆ 1

GM n Cˆ1 , Ui − βˆρ,k ˆ k k

(6.72)

i≤k

based on an adequate, consistent estimator for ρ. The estimator in (6.72) is thus a bias–corrected Hill estimator, i.e., the dominant component of the bias of the Hill estimator, provided in (6.56) and equal to A(n/k)/(1 − ρ) = γβ(n/k)ρ /(1 − ρ) is ρˆ GM (n/k) Cˆ1 , and directly removed from the Hill estimator in estimated though βˆρ,k ˆ H = i≤k Ui /k. (6.54), which can also be written as γn,k If the second order condition √ (6.51) holds, if k = kn is a sequence of intermediate positive integers, and k A(n/k) → λ, ﬁnite, √ as n → ∞, with ρˆ any kA(n/k) → λ, ﬁnite, one ρ–estimator such that ρ ˆ − ρ = o (1) for any k such that p √ GM

− γ is asymptotically normal with mean zero and variance obtains that k γρ,k ˆ 2 σGM =

47 Gomes,

γ 2 (1 − ρ)2 . ρ2

(6.73)

M.I. and Martins, M.J. (2002). “Asymptotically unbiased” estimators of the tail index based on external estimation of the second order parameter. Extremes 5, 5–31.

6.6. An Overview of Reduced–Bias Estimation

201

External Estimation of β and ρ GM Gomes et al.48 suggest the computation of the β estimator βˆρ,k at the level k1 in ˆ GM (6.63), the level used for the estimation of ρ. With the notation βˆ := βˆρ,k ˆ 1 , they suggest thus the replacement of the estimator in (6.72) by

ρˆ H M ˆ n Cˆ1 , M := γ − β ≡ γˆβ, ˆ ˆ ρ,k n,k β,ρ,k ˆ ˆ k

(6.74)

H ˆ ρˆ) are adequate consistent where γn,k denotes the Hill estimator in (6.54), and (β, estimators of the second order parameters (β, ρ). With the same objectives, but with a slightly simpler analytic expression, we shall here also consider the estimator ρˆ H H ˆ ˆ) , (6.75) ≡ H β, γˆβ, ˆ ρ,k ˆ ρ,k ˆ := γn,k 1 − β (n/k) /(1 − ρ ˆ

studied in Caeiro et al., cf. page 197. Notice that the dominant component of the H ˆ β(n/k)ρˆ/(1 − ρˆ), and bias of the Hill estimator is estimated in (6.75) through γn,k directly removed from Hill’s classical tail index estimator. The estimation of β and ρ at the level k1 in (6.63), of a higher order than the level k used for the tail index estimation, enables the reduction of bias without increasing the asymptotic variance, which is kept at the value γ 2 , the asymptotic variance of Hill’s estimator. • any of the estimators in (6.74) and (6.75), we now formuDenoting by γˆβ, ˆ ρ,k ˆ late two asymptotic results for these estimators.

• Under the second order condition (6.51) and k intermediate, further assuming that A(·) can be chosen as in (6.67), we have γP • d • γˆβ,ρ,k = γ + √ k + op (A(n/k)), k

(6.76)

where Pk• is an asymptotically standard normal random variable. This is an • . immediate consequence of the representation of γˆβ,ρ,k • The result in (6.76) remains true for the reduced–bias tail index estimaρ− tors estimators in (6.74) and (6.75), provided that βˆ − β = op (1) and (ˆ ρ) log(n/k)√= op (1) for all k on which we base the tail index estimation, i.e., whenever k A(n/k) → λ, ﬁnite. √ •

− γ is asymptotically normal For these values of k, one gets that k γˆβ, ˆ ρ,k ˆ with mean zero and variance (6.77) σ•2 = γ 2 . 48 Gomes,

M.I., Martins, M.J. and Neves, M. (2005). Revisiting the second order reduced bias “maximum likelihood” extreme value index estimators. Notas e Comunica¸co ˜es CEAUL 10/2005. Submitted.

202

6. Advanced Statistical Analysis This is immediate from • • ∼ − − γˆβ,ρ,k γˆβ, ˆ ρ,k ˆ

A(n/k) βˆ − β + (ˆ ρ − ρ) log(n/k) . 1−ρ β

In Fig. 6.7, we illustrate the diﬀerences between the sample paths of the estimator in (6.75), denoted H β, ˆ ρˆ for the sake of simplicity. We have considered a sample of size n = 10, 000 from a Fr´echet model, with γ = 1, when we compute βˆ and ρˆ at the same level k used for the estimation of the tail index γ (left), when we compute only βˆ at that same level k, being √ ρˆ computed at a larger k-value, let us say an intermediate level k1 such that k1 A(n/k1 ) → ∞, as n → ∞ (center) and when both ρˆ and βˆ are computed at that high level k1 (right). We have estimated β through βˆ0,k = βˆρGM ˆ01 ,k in (6.71), computed at the level k used for the estimation of the tail index, as well as computed at the level k1 = [n0.995 ] in (6.63), the one used for the estimator ρˆ01 in (6.64). We use the notation βˆ01 = βˆ0,k1 . The estimates of β and ρ have been incorporated in the H–estimator, leading to H βˆ0,k ,ρˆ0,k (left), H βˆ0,k ,ρˆ01 (center) and H βˆ01 ,ρˆ01 (right). 1,2

1,2

H

H βˆ

1,2

H

H

H βˆ

0,k , ρˆ 0,k

0,k ,ρˆ 01

1,0

1,0

1,0

Hˆ

β01 ,ρˆ 01

k

0,8 0

5000

10000

k

0,8 0

5000

10000

k

0,8 0

5000

10000

Fig. 6.7. External estimation of (β, ρ) at a larger ﬁxed level k1 (right) versus estimation at the same level both for β and ρ (left) and only for β (center).

From the pictures in Fig. 6.7, as well as from the asymptotic results in (6.60), (6.70), (6.73) and (6.77), we thus advise, in practice: • The direct estimation of the dominant component of the bias of Hill’s estimator of a positive tail index γ. The second order parameters in the bias should be computed at a ﬁxed level k1 of a larger order than that of the level k at which we compute the Hill estimator. • Such an estimated bias should then be directly removed from the classical Hill estimator. • Doing this, we are able to keep the asymptotic variance of the new reducedbias tail index estimator equal to γ 2 , the asymptotic variance of the Hill estimator.

6.6. An Overview of Reduced–Bias Estimation

203

A Simulation Experiment We have here implemented a simulation experiment, with 1000 runs, for an underlying Burr parent,

1/ρ , x ≥ 0, F (x) = 1 − 1 + x−ρ/γ with ρ = −0.5 and γ = 1. For these Burr models, β = γ for any ρ. We have again estimated β through βˆ0,k , computed at the level k used for the estimation of the tail index, as well as computed at the level k1 in (6.63), the one used for the estimator ρˆ01 in (6.64). We use the same notation as before. The simulations show that the tail index estimator H βˆ01 ,ρˆ01 ,k seems to work reasonably well, as illustrated in Fig. 6.8.

E[•]

1,6

H βˆ

H

1,4

H βˆ

0,k , ρˆ 01

MSE[•]

0,10

H

01 ,ρˆ 01

H βˆ

H β ,ρ

1,2 1,0

01 , ρˆ 01

0,05

0,8

H βˆ

GJ ρˆ 01

0,6

k

0,4 0

200

400

600

800

1000

0,k ,ρˆ 01

GJ ρˆ 01

H β ,ρ 0,00 0

200

400

600

800

k

1000

Fig. 6.8. Mean values and mean squared errors of estimators the Hill and reduced–bias estimators, for samples of size n = 1000, from a Burr parent with γ = 1 and ρ = −0.5 (β = 1).

The discrepancy between the behavior of the estimator H βˆ01 ,ρˆ01 and the random variable H β,ρ suggests that some improvement in the estimation of second order parameters may be still welcome, but the behavior of the mean squared error of the H–estimator is rather interesting: the new estimator H βˆ01 ,ρˆ01 ,k is better than the Hill estimator not only when both are considered at their optimal levels, but also for every sub–optimal level k, and this contrarily to what happens with the classical reduced–bias estimators GJρˆ01 and H βˆ0,k ,ρˆ01 , as we may also see in Fig. 6.8. Some overall conclusions • If we estimate the ﬁrst order parameter at a level k, and use that same level k for the estimation of the second order parameter ρ and β in A(t) = γ β tρ , we

204

6. Advanced Statistical Analysis get a much higher asymptotic variance than when we compute ρ at a larger level k1 , computing β at the same level k. And we may still decrease the asymptotic variance of the tail index reduced–bias estimators, if we estimate both second order parameters, β and ρ, at a larger level k1 than the one used for the estimation of the ﬁrst order parameter.

• The main advantage of the new reduced–bias estimators in (6.74) and (6.75) lies on the fact that we can estimate β and ρ adequately through βˆ and ρˆ so that the MSE of the new estimator is smaller than the MSE of Hill’s estimator for all k, even when |ρ| > 1, a region where has been diﬃcult to ﬁnd alternatives for the Hill estimator. And this happens together with a higher stability of the sample paths around the target value γ. The pioneering paper on a new type of reduced–bias estimators of a positive tail index, i.e., the ones with an asymptotic variance equal to γ 2 , is by Gomes et al.49 , who introduce a weighted Hill estimator, linear combination of the log–excesses. • To obtain information on the asymptotic bias of these reduced–bias estimators we should have gone further into a third order framework, specifying the rate of convergence in the second order condition in (6.51). This is however beyond the scope of this chapter. Interested readers may look into Gomes et al.50

The Estimation of β and γ in Action We go on with the following: Algorithm (β and γ estimation). ˆ = (ˆ ρτ,k1 , βˆρˆτ,k1 ), ρˆτ,k , 4. Chosen τ in step 3, work then with (ˆ ρ, β) ρτ 1 , βˆτ 1 ) := (ˆ k1 and βˆρ,k ˆ given in (6.62), (6.63) and (6.71), respectively. 5. Estimate the optimal level for the estimation through the Hill, given by

2/(1−2ρ) √ ˆ , compute kmin = kˆ0H /4, kmax = 4kˆ0H kˆ0H = (1 − ρˆ)n−ρˆ/(βˆ −2ρˆ) and plot the classical Hill estimates Hk , kmin ≤ k ≤ kmax . 6. Plot also, again for kmin ≤ k ≤ kmax , the reduced-bias tail index estimates ˆ in step 4. H β, ρ, β) ˆ ρ,k ˆ ρ,k ˆ and M β, ˆ , associated to the estimates (ˆ 49 Gomes,

M.I., de Haan, L. and Rodrigues, L. (2004). Tail index estimation through accommodation of bias in the weighted log–excesses. Notas e Comunica¸co ˜es CEAUL 14/2004. Submitted. 50 Gomes,

M.I., Caeiro, F. and Figueiredo, F. (2004). Bias reduction of a tail index estimator through an external estimation of the second order parameter. Statistics 38, 497–510.

6.6. An Overview of Reduced–Bias Estimation

205

7. Obtain χH , χH and χM , the medians of Hk , H β, ˆ ρ,k ˆ ρ,k ˆ and M β, ˆ , respectively,

2 for kmin ≤ k ≤ kmax . Compute the indicators, IH := k1 ≤k≤k2 Hk − χH ,

2

2 and IM := k1 ≤k≤k2 M β, . IH := k1 ≤k≤k2 H β, ˆ ρ,k ˆ ρ,k ˆ − χH ˆ − χM 8. Let T be the estimator (among H, H and M ) providing the smallest value among IH , IH and IM . Consider γˆT = χT as estimate of γ.

Financial Data Analysis We now provide a data analysis of log–returns associated to the Euro–British pound daily exchange rates, collected from January 4, 1999, until November 17, 2005. The number of positive log–returns of these data is n0 = 385. The sample paths of the ρ–estimates associated to the tuning parameter τ = 0 and τ = 1 lead us to choose, on the basis of any stability criterion for large k, like the one suggested in step 3. of the Algorithm, the estimate associated to τ = 0. The

estimates obtained are ρˆ0 , βˆ0 = (−0.686, 1.047) obtained at k1 = 808. In Fig. 6.9, for the Euro–British pound data, we picture the sample paths of the estimators of the second order parameters ρ (left) and the sample paths of the classical Hill estimator H in (6.54), the second order reduced–bias tail index estimators H 0 = H βˆ01 ,ρˆ01 and M 0 = M βˆ01 ,ρˆ01 , provided in (6.74) and (6.75), respectively (right). For this data set, the criterion in step 7. of the Algorithm led to the choice of M 0 and to the estimate γˆM = 0.289 (associated to k = 132). 0

k

0 0

-1

400

0,4

ρˆ 0 (k)800 ρˆ = −0.70

H

H0

0,3

γˆM 0 = 0.29 -2

-3

ρˆ 1( k)

M0

0,2

0,1 10

100

190

k

Fig. 6.9. Estimates of ρ, through ρˆτ,k in (6.62), τ = 0 and 1 (left), and of γ, through H, M and H in (6.54), (6.74) and (6.75) (right), for the positive log–returns on Euro–British pound data.

206

6. Advanced Statistical Analysis

Additional Literature on Reduced–Bias Tail Index Estimation Other approaches to reduced–bias estimation of the tail index can be found in Gomes and Martins51 , Fraga Alves52 and Gomes et al.53 54 , and the references therein.

51 Gomes, M.I. and Martins M.J. (2001). Alternatives to Hill’s estimator—asymptotic versus ﬁnite sample behaviour. J. Statist. Planning and Inference 93, 161–180. 52 Fraga Alves, M.I. (2001). A location invariant Hill–type estimator. Extremes 4, 199– 217. 53 Gomes,

M.I., Figueiredo, F. and Mendon¸ca, S. (2005). Asymptotically best linear unbiased tail estimators under a second order regular variation condition. J. Statist. Plann. Inf. 134, 409–433 54 Gomes,

M.I., Miranda, C. and Viseu, C. (2006). Reduced bias tail index estimation and the Jackknife methodology. Statistica Neerlandica 60, 1–28.

Chapter 7

Statistics of Dependent Variables coauthored by H. Drees1

Classical extreme value statistics is dominated by the theory for independent and identically distributed (iid) observations. In many applications, though, one encounters a non–negligible serial (or spatial) dependence. For instance, returns of an investment over successive periods are usually dependent, cf. Chapter 16, and stable low pressure systems can lead to extreme amounts of rainfall over several consecutive days. These examples demonstrate that a positive dependence between extreme events is often particularly troublesome as the consequences, which are already serious for each single event, may accumulate and ﬁnally result in a devastating catastrophe. In Section 7.1 we discuss the impact of serial dependence on the statistical tail analysis. A more detailed analysis of the consequences for the estimation of the extreme value index and extreme quantiles is given in Section 7.2 and Section 7.3, respectively, under mild conditions on the dependence structure. Section 7.4 deals with (semi–)parametric time series models where the dependence structure is known up to a few parameters. Throughout this chapter we assume that a strictly stationary univariate time series Xi , 1 ≤ i ≤ n, with marginal df F is observed, cf. page 165.

1 Universit¨ at

Hamburg.

208

7.1

7. Statistics of Dependent Variables

The Impact of Serial Dependence

The presence of serial dependence has two consequences for the modeling and the statistical analysis of the data. Firstly, in contrast to the iid case, the stochastic behavior is not fully determined by the df of a single observation, but the serial dependence structure must be taken into account, e.g., when the distribution of the sum of two successive observations is to be analyzed. Secondly, even if one is interested only in the tail behavior of the marginal distribution, then often the serial dependence strongly inﬂuences the accuracy of estimators or tests known from classical extreme value statistics for iid data. If one does not assume a (semi–)parametric time series model, then relatively few statistical methods for the estimation of the dependence structure between extreme observations are available. One possible approach to the analysis of the dependence is to apply multivariate extreme value statistics to the vectors of successive observations. Although this approach has proved fruitful in probability theory, it is of limited value in the statistical analysis because, due to the ‘curse of dimensionality’, in practice only very few consecutive observations can be treated that way. Alternatively, estimators for certain parameters related to the serial dependence have been proposed in the literature. Best known are estimators of the extremal index, that is, the reciprocal value of the mean cluster size, cf. Sections 2.7 and 6.2. Hsing2 also proposed estimators for the cluster size distribution. Unfortunately, all these parameters bear limited information about the serial dependence structure. For example, Gomes and de Haan3 proved that the probability of k successive exceedances of an ARCH(1) time series over a high threshold does not only depend on the extremal index but on the whole dependence structure of the ARCH process. of the marginal parameters that of the aforementioned dependence parameters. Since a more general approach to the statistical analysis of the dependence structure is still an open problem, here we will focus on the second aspect, that is, the inﬂuence of the serial dependence on estimators of marginal tail parameters like the extreme value index or extreme quantiles. Recall from (6.11) that under weak conditions one has ˜i ≤ x max X P max Xi ≤ x ≈ P 1≤i≤n

1≤i≤[nθ]

˜ i denote iid random variables with the same df F as for large values of n where X X1 and θ ∈ (0, 1] is the extremal index. Hence, as far as maxima are concerned, the serial dependence reduces the eﬀective sample size by a factor θ. Likewise, one may expect that a time series with a non–negligible serial dependence bears less 2 Hsing, T. (1991). Estimating the parameters of rare events. Stoch. Processes Appl. 37, 117–139. 3 Gomes,

M.I. and de Haan, L. (2003). Joint exceedances of the ARCH process. Preprint, Erasmus University Rotterdam.

7.2. Estimation of the Extreme Value Index

209

information on F than an iid sample of the same size, and that thus the estimation error for marginal parameters will be higher. Indeed, we will see that under mild conditions on the dependence structure the same estimators as in the classical iid setting can be used, but that their distribution is less concentrated about the true value. Generally, the application of standard estimation procedures relies on ergodic theory4 5 . However, if one does not account for this loss of accuracy, e.g., in ﬂood frequency analysis, then it is likely that safety margins are chosen too low to prevent catastrophic events with the prescribed probability. The construction of conﬁdence intervals based on dependent data is substantially more complicated than in the iid setting, because the extent to which the estimation error is increased by the serial dependence does not only depend on a simple dependence parameter—like the extremal index—but on the whole dependence structure in a complex manner. Therefore, a completely new approach to the construction of conﬁdence intervals is needed, see Sections 7.2 and 7.3. As a by–product, we will also obtain a new graphical tool for choosing the sample fraction on which the estimation is based, that may be useful also in the standard iid setting. Instead of examining the accuracy of estimators of marginal parameters under dependence, one may also ﬁrst try to decluster the observed time series and then to apply the classical statistical theory to the nearly independent data thus obtained, see also the end of Section 2.7. This approach, however, has two serious drawbacks. Firstly, the declustering is often a delicate task that must be done manually by subject–matter specialists. Secondly, although a cluster bears less information than iid data of the same size, taking into account only one observation from each cluster usually seems a gross waste of information which will often lead to even larger estimation errors for the parameter of interest. For these reasons, in what follows we will adopt are more reﬁned approach.

7.2

Estimating the Extreme Value Index

Assume that the df F belongs to the max–domain of attraction of an extreme value distribution with index γ. Recall from (1.46) that then the conditional distribution of an exceedance over a high threshold u can be approximated by a GP distribution Wγ,u,σu . In Section 5.1 this approximation was used to derive estimators of the extreme value index γ which use only the k largest observations from analogous estimators in a parametric GP model. We will see that under mild conditions the same estimators can be used for time series data. 4 R´ ev´esz,

P. (1968). The Laws of Large Numbers. Academic Press, New York.

5 Pantula,

S.G. (1988). Estimation of autoregressive models with ARCH errors. Sankhy¯ a 50, 119–148.

210

7. Statistics of Dependent Variables

Conditions on the Dependence Structure The trivial time series Xi = X1 for all i shows that, without further conditions, in general this approach is not justiﬁed any longer if the data exhibit serial dependence. To avoid problems of that type, we require that the dependence between the data observed in two time periods separated by l time points vanishes as l increases. More precisely, we assume that the so–called β–mixing coeﬃcients tend to 0 suﬃciently fast. For technical details of the conditions and results mentioned in this and the next section, we refer to a series of articles6 7 8 . This mixing condition is usually satisﬁed for linear time series like ARMA models, and also for the GARCH models deﬁned by (16.29) and (16.44)—introduced in conjunction with returns of random asset prices—and, more general, for Markovian time series under mild conditions. However, time series models with long range dependence are often ruled out. Secondly, we need to assume that the serial dependence between exceedances over a high threshold u stabilizes as u increases. This very mild condition will be automatically satisﬁed if the vector (X1 , X1+h ) belongs to the max–domain of attraction of a bivariate extreme value distribution, see (12.2), for all h > 0. Finally, we assume that the sizes of clusters of extreme observations have a ﬁnite variance.

Normal Approximations and Conﬁdence Intervals Under these mild conditions, it can be shown that the k largest order statistics Xn−k+1:n , . . . , Xn:n can be approximated by the order statistics of GP random variables. More precisely, one can approximate the empirical tail quantile function pertaining to the observed order statistics by a GP quantile function plus a stochastic error term of order k −1/2 , provided k is suﬃciently small relative to the sample size n, but not too small. The stochastic error term can be described in terms of a centered Gaussian process whose covariance function is determined by the tail dependence structure of the observed time series. From this result, one can derive approximations to the distributions of the estimators introduced in Section 5.1. For example, the Hill estimator (in the case γ > 0) and the maximum likelihood estimator in the GP model based on the k largest order statistics (if γ > −1/2) are approximately normally distributed with mean γ and variance γ 2 σ02 /k and (1 + γ)2 σ02 /k, respectively, where σ02 is 6 Drees, H. (2000). Weighted approximations of tail processes for β–mixing random variables. Ann. Appl. Probab. 10, 1274–1301. 7 Drees,

H. (2002). Tail empirical processes under mixing conditions. In: H.G. Dehling, T. Mikosch und M. Sørensen (eds.), Empirical Process Techniques for Dependent Data, 325–342, Birkh¨ auser, Boston. 8 Drees,

H. (2003). Extreme quantile estimation for dependent data with applications to ﬁnance. Bernoulli 9, 617–657.

7.2. Estimation of the Extreme Value Index

211

determined by the dependence structure. If the data are independent, then σ02 = 1 while typically σ02 > 1 if serial dependence is present in the data. Recall that this approximation is justiﬁed only if k is suﬃciently small relative to the length of the time series, while for larger values of k the estimators exhibit a non–negligible bias if F is not exactly equal to a GP df or, for the Hill estimator, the location parameter in the GP1 model does not equal 0. Hence the Hill estimator need not outperform the ML estimator, despite its smaller variance, cf. the discussion around Fig. 5.1 and Fig. 5.2. Unlike for iid samples, the estimators will not necessarily be asymptotically normal if k grows too slowly as the sample size n increases. This new eﬀect can be explained as follows. If k is very small relative to n, then all order statistics used by the estimator stem from very few clusters of large observations. However, within one cluster the behavior of large observations is not determined by the tail df only, but it is also inﬂuenced by the speciﬁc serial dependence structure. In practice, the lower bound on the rate at which k tends to inﬁnity does not cause major problems, because usually the β–mixing coeﬃcients tend to 0 at an exponential rate. In this case, it is suﬃcient that k is of larger order than log2+ε n for some ε > 0, which is anyway needed to obtain accurate estimates. (k) More generally, a large class of estimators γˆn that use only the k largest order statistics are approximately normally distributed with mean γ and variance σ 2 /k with a σ 2 > 0 that is determined by the tail dependence structure of the time series. While this approximation allows a comparison of the performance of diﬀerent estimators for a given time series model, it cannot be used directly for the construction of conﬁdence intervals, because σ 2 is unknown. To overcome this problem, we take advantage of the fact that the size of the (k) random ﬂuctuations of the estimates γˆn as k varies are proportional to σ. More concretely, one can show that, for a suitable chosen j, the estimator σ ˆn2 :=

k k

(ˆ γn(i) − γˆn(k) )2 (i−1/2 − k −1/2 )2 i=j

(7.1)

i=j

is consistent for σ 2 . Simulation studies indicate that in practice one may choose j (j) equal to the smallest number such that γˆn is well deﬁned, e.g., j = 2 for the Hill estimator. Now approximative conﬁdence intervals for γ can be easily constructed. For example, γˆn(k) − Φ−1 (1 − α/2)ˆ (7.2) σn k −1/2 , γˆn(k) + Φ−1 (1 − α/2)ˆ σn k −1/2 deﬁnes a two–sided conﬁdence interval with nominal coverage probability 1 − α.

Changes of Interest Rates—a Case Study, Part 1 Life insurance companies often invest a large proportion of the capital they manage in low risk bonds. If they guarantee a minimal interest rate to their customers,

212

7. Statistics of Dependent Variables

they are exposed to the risk that the interest rates of the low risk bonds drop below this level. On the other hand, a hike of the interest rates will let the value of the portfolio decrease rapidly, which may cause problems if many customers withdraw their capital from the company. In both cases a quick change of the interest rate is particularly troublesome, as it gives the company little time to adjust its investment strategy. In this case study, we want to analyze the interest rates of the US treasury bonds with maturity in 10 years observed on a monthly basis from 1957 to 1999. The time series Ri , 1 ≤ i ≤ m, of length m = 515 is assumed stationary. Given the long observational period, this assumption is somewhat questionable but no natural alternative model is at hand. We are interested in extreme quantiles of the change of the rate over one year. In order to not waste data, we analyze the interest rate changes over overlapping one year periods, namely Xi := Ri+12 − Ri ,

1 ≤ i ≤ n := m − 12 = 503,

which are clearly dependent, see Fig. 7.1.

0.04 0.03 0.02 0.01 100

200

300

400

500

-0.01 -0.02 -0.03 -0.04

Fig. 7.1. Yearly changes of interest rates of 10 year treasury bonds.

-0.05

As a ﬁrst step in the analysis of the upper tail, we estimate the extreme value index. The left plot of Fig. 7.2 displays the Hill estimator, the ML estimator in the GP model and the moment estimator, cf. Section 5.1, as a function of the number k of largest order statistics. All three estimates are quite diﬀerent: the Hill plot exhibits a clear (upward) trend almost from the beginning, while the curves of the ML estimates and the moment estimates are nearly parallel for k between 50 and 200. As a rule of thumb, such a behavior indicates that a Pareto model with non– vanishing location parameter ﬁts the upper tail well. Indeed, after a shift of the data by 0.05, the ML estimator and the moment estimator yield almost identical values for 80 ≤ k ≤ 220 which are relatively stable for 100 ≤ k ≤ 160, and the Hill plot is very stable for 80 ≤ k ≤ 160 with values close to the other estimates (Fig. 7.2, right plot). Again we see that the Hill estimator is particularly sensitive to shifts of the data, whereas the moment estimator is less strongly inﬂuenced and

7.2. Estimation of the Extreme Value Index

213

the ML estimator is invariant under such shifts, cf. Fig. 5.1. Here, after the shift, the Hill estimator with k = 160 seems a reasonable choice, that yields γ ≈ 0.111. Other diagnostic tools, like a QQ–plot, conﬁrm that the corresponding pure Pareto model ﬁts the tail well after the shift of the data. 1 0.25

0.8

0.2

0.6

0.15

0.4

0.1

0.05

0.2

50 50

-0.2 -0.4

100

150

200

250

300

350

400

450

500

k

-0.05

100

150

200

250

300

350

400

450

500

k

-0.1

-0.15

-0.2

Fig. 7.2. Hill estimator (solid), ML estimator (dashed) and moment estimator (dotted) for the right tail of yearly interest rate changes (left) and the same data shifted by 0.05 (right).

Next we calculate the conﬁdence intervals (7.2). The estimates of the asymptotic variance according to (7.1) are plotted in the left graph of Fig. 7.3. Again the curve is quite stable for k between 80 and 180. The right graph of Fig. 7.3 displays the Hill estimator together with the 95%–conﬁdence intervals (7.2) as a function of k. For comparison, also the conﬁdence intervals γˆn(k) (1 − Φ−1 (1 − α/2)k −1/2 ), γˆn(k) (1 + Φ−1 (1 − α/2)k −1/2 ) (7.3) are plotted for α = 0.05, that would be appropriate if the data were independent and hence the asymptotic variance was equal to γ 2 . As one expects, the conﬁdence intervals which take the serial dependence into account, are considerably wider: for k = 160 it equals [0.086, 0.136] compared with the interval [0.094, 0.128] derived from the theory for iid data. (However, note that these conﬁdence intervals do not account for the shift of the data by 0.05, which is motivated by the achieved coincidence of the moment estimator and the ML estimator and is thus data driven. Taking this into account would lead to even wider conﬁdence intervals.) The analysis of the lower tail is more diﬃcult. After shifting the data by 0.2 one obtains the ML estimates and the moment estimates shown in the left plot of Fig. 7.4. Here the true value may be negative, so that the Hill estimator cannot be used. For k ≤ 120 both estimators are very unstable, but for k between 120 and 275 the curves are relatively stable and close together. A QQ–plot based on the moment estimator with k = 270 shows that the tail is ﬁtted reasonably well, although the most extreme observations deviate from the ideal line. Simulations, however, show that for dependent data one must expect much bigger deviations in the QQ–plot than one typically observes for iid data. Unfortunately, because

214

7. Statistics of Dependent Variables 0.3

0.14 0.12

0.25

0.1

0.2

0.08

0.15

0.06

0.1 0.04

0.05

0.02 50

100

150

350 k

300

250

200

50

100

350k

300

250

200

150

Fig. 7.3. Estimated asymptotic variance according to (7.1) (left) and the Hill estimator (solid) with 95%–conﬁdence intervals (7.2) (dashed) and 95%–conﬁdence intervals (7.3) assuming independence (dotted) (right).

of the large ﬂuctuations of the estimators for small values of k, the estimates for the asymptotic variance are unreliable, and no reasonable conﬁdence interval is available. 0.05

0.245

50 -0.05

100

150

200

250

300

350

400

k

0.24

0.235

-0.1

-0.15

-0.2

0.23

0.225

-0.25

0.22

-0.3

0.215

-0.35

-0.4

-0.45

-0.5

0.21

0.205

0.2

0.5

1

1.5

2

2.5

3

3.5

4

4.5

5

5.5

6

Fig. 7.4. ML estimates (dashed) and moment estimates (dotted) for the left tail (left) and QQ–plot (right).

Choice of the Sample Fraction Used for Estimation The shape of the curve of variance estimates displayed in the left plot of Fig. 7.3 is quite common when the Hill estimator is used. Except for the very ﬁrst values of k, the variance estimates are usually rather large when only few order statistics are used, then the curve decreases until it stabilizes for intermediate values of k, and ﬁnally at a certain point it sharply increases. Since the estimator σ ˆn2 just measures an average squared diﬀerence of Hill estimators based on diﬀerent numbers of order statistics, it cannot distinguish between random ﬂuctuations and systematic changes due to an increasing bias. Hence, for larger values of k, the growing bias leads to increasing variance estimates. Although in this range

7.3. Extreme Quantile Estimation

215

the variance estimates are clearly quite inaccurate, in practice this eﬀect is to be welcomed for two reasons. Firstly, much more clearly than the Hill plot, the sharp kink in the curve of variance estimates indicates the point from which on the bias signiﬁcantly contributes to the error of the Hill estimator. Therefore, the plot of the variance estimates is a very useful tool for choosing the number of largest order statistics to be used by the Hill estimator even for iid data. Secondly, the conﬁdence intervals (7.2) start to widen again at the point where the bias kicks in, whereas the conﬁdence intervals (7.3) motivated by the theory for iid data usually shrink with increasing k. Hence the latter give a totally false impression; indeed, in literature one can often ﬁnd plots of “conﬁdence intervals” which are disjoint for diﬀerent values of k! In contrast, the conﬁdence intervals derived from the theory for dependent data are qualitatively more reasonable for large values of k (though they are too conservative) in that the growing uncertainty due to the increasing bias is taken into account. Unfortunately, as in the analysis of the lower tail in the case study, the variance estimates (7.1) are often unreliable when the estimator of the extreme value index are very unstable for small values of k. Sometimes it might help to start with a larger number of order statistics, that is, to choose a larger value for j, but this requires the number of observations to be large, which limits the applicability of this approach. In this case, one might think of robustiﬁed versions (i) (k) of the variance estimator. For example, the squared diﬀerence (ˆ γn − γˆn )2 could −1/2 −1/2 2 be replaced with the absolute diﬀerence and, accordingly, (i −k ) with |i−1/2 − k −1/2 |, but it is not clear whether the resulting estimator is consistent for σ 2 , too.

7.3

Extreme Quantile Estimation

In most applications, not the extreme value index (which is just a parameter in the limit model for maxima or exceedances) but, e.g., extreme quantiles xp := F −1 (1 − p) for small p > 0 are the main parameters of interest, see Chapter 16.

Estimation in the Restricted Pareto Model The estimation of extreme quantiles is particularly simple if the largest order statistics approximately behave as in the restricted Pareto model with location parameter 0. Then xp can be estimated by the so–called Weissman estimator x ˆn,p := x ˆ(k) n,p := Xn−k+1:n (k)

np −ˆγn k

(7.4)

where γˆn = γˆn denotes an estimator of γ that is based on the k largest observations. Of course, this approach only makes sense if k is much bigger than np, because else one could simply use the empirical quantile Xn−[np]+1:n .

216

7. Statistics of Dependent Variables In the setting of Section 7.2, one has under very mild extra conditions on p x x ˆn,p ˆn,p 1 1 log = − 1 (1 + oP (1)) log(k/(np)) xp log(k/(np)) xp = (ˆ γn − γ)(1 + oP (1)).

Hence, if γˆn is approximately normal with mean γ and variance σ 2 /k, then both log(ˆ xn,p /xp ) and x ˆn,p /xp − 1 are approximately normal with mean zero and variance log2 (k/(np))σ 2 /k. In particular if one uses the Hill estimator γˆn , the normal approximation is much better for log(ˆ xn,p /xp ) than for the relative estimation error xˆn,p /xp − 1, because log xˆn,p is a linear function of γˆn , which in turn is a linear statistic and hence is often well approximated by a normal random variable (cf. Fig. 7.10). Therefore, conﬁdence intervals shall be based on the normal apˆn2 is a proximation for log xˆn,p rather than the normal approximation for xˆn,p . If σ 2 suitable estimator for σ , then

x ˆn,p exp − Φ−1 (1 − α/2)ˆ σn k −1/2 log(k/(np)) ,

xˆn,p exp Φ−1 (1 − α/2)ˆ σn k −1/2 log(k/(np)) (7.5) is a conﬁdence interval for xp with approximate coverage probability 1 − α. Here one may use the variance estimator (7.1) deﬁned in terms of diﬀerences of γ–estimates, but it is more natural to deﬁne an analogous estimator in terms (k) of logarithmic quantile estimators log x ˆn,p for diﬀerent numbers k of largest order statistics: k k (i) (k)

log(ˆ xp /ˆ xp ) 2 −1/2 log(k/(np)) −1/2 2 2 i k − , (7.6) σ ˆn,p := log(i/(np)) log(i/(np)) i=j i=j with j greater than np. Unlike (7.1), this estimator measures directly the ﬂuctu(k) ations of log x ˆn,p as a function of k. Because the estimator (7.1), as an estimator for the asymptotic variance of the quantile estimator, relies on the aforementioned (k) asymptotic relationship between the ﬂuctuations of γˆn and of log xˆn,p , one may 2 expect that the estimator σ ˆn,p performs better for moderate sample sizes when this asymptotic approximation is inaccurate. In an extensive simulation study9 it has been shown that for the Hill estimator and several time series models, the conﬁdence intervals (7.5) with the variance estimated by (7.6) are quite accurate, though a bit too conservative, because the asymptotic variance is over–estimated. To correct for this over–estimation, one 2 ˆn,p (or the width of the conﬁdence intervals) is may choose k ≥ k0 such that σ minimized, when k0 is chosen such that the variance estimates seem reliable for k ≥ k0 . This simple trick works surprisingly well for many time series models. 9 Drees,

H. (2003). Extreme quantile Estimation for Dependent Data with Applications to Finance. Bernoulli 9, 617–657.

7.3. Extreme Quantile Estimation

217

Note that the asymptotic variance of the quantile estimators does not depend on p. Hence one may use an exceedance probability p˜ in the deﬁnition (7.6) 2 of σ ˆn, p˜ diﬀerent from the exceedance probability p of the extreme quantile one is actually interested in. While this approach contradicts the general philosophy explained above (namely that one should use the same estimators for the estimation of the variance and for the estimation of the parameter of interest), it improves the performance of the conﬁdence intervals signiﬁcantly if p is so small such that F −1 (1 − p) lies far beyond the range of observations and thus the quantile estimators are quite inaccurate. In such a situation it is advisable to estimate the 2 −1 (1 − p˜) lies at the border variance by σ ˆn, p˜ such that the corresponding quantile F of the sample, e.g., p˜ = 1/n.

Changes of Interest Rates—a Case Study, Part 2 In the situation of the case study discussed above, we aim at estimating the maximal yearly change of interest rates of the 10 year US treasury bonds which is exceeded with probability 1/2000, i.e., we want to estimate x0.0005 . Again we use the Hill estimator for the extreme value index applied to the observed yearly changes shifted by 0.05. The left plot in Fig. 7.5 displays the variance estimates (7.6) with j = 2. (The 2 ˜ = 1/500 and j = 3.) estimates do not change much when one uses σ ˆn, p˜ with p 2 As the variance estimates σ ˆn for the Hill estimator, see Fig. 7.3, the variance es2 timates σ ˆn,p are quite high if only few order statistics are used and they stabilize for k around 150, but here for k = 160 one obtains an estimated variance of 0.038, while for the Hill estimator one gets 0.027. This seems to contradict the asymptotic result, according to which these asymptotic variances are equal. However, a closer inspection of the proof of the asymptotic normality of the quantile estimator shows that the ﬁrst term ignored in the asymptotic expansion is just of the order 1/ log(k/(np)) smaller than the leading term. Thus for moderate sample sizes, the asymptotic result can be quite misleading. The quantile estimates and the conﬁdence intervals based on the variance estimates discussed above are shown in the right plot of Fig. 7.5 together with the conﬁdence intervals when the asymptotic variance is estimated by γˆn2 as it is suggested by the asymptotic theory for iid data. (The estimates are corrected for the shift by 0.05 of the observed interest rate changes.) Here, for k = 160, the former interval [0.044, 0.089] is more than 4 times longer than the latter interval [0.060, 0.070]! In such a situation, for two reasons it is questionable to use the standard asymptotic theory: ﬁrstly, one ignores the loss of accuracy due to the serial dependence, and secondly, the ﬁrst order asymptotic approximation of the quantile estimator is rather crude for moderate sample sizes. The point estimate for x0.0005 is 0.065. Note that the conﬁdence intervals are not symmetric about this point estimate, because we have used the normal approximation of log x ˆn,p rather than that of x ˆn,p to construct the conﬁdence intervals.

218

7. Statistics of Dependent Variables 0.14

0.18 0.16

0.12

0.14

0.1

0.12

0.08

0.1

0.06

0.08 0.06

0.04

0.04

0.02

0.02 50

100

150

200

250

300

350k

50

100

150

200

250

300

350 k

−1

Fig. 7.5. Variance estimator (7.6) (left) and the estimated quantile F (1 − 1/2000) (solid) with conﬁdence intervals (7.5) (dashed) and the conﬁdence intervals derived from the asymptotic theory for iid data (dotted) (right).

Estimation in the Generalized Pareto Model While in principle it is quite simple to calculate point estimates of extreme quantiles in the full GP model, the construction of reliable conﬁdence intervals is a diﬃcult task. To estimate xp = F −1 (1 − p), one ﬁts the GP model to the k largest order statistics, as it is described in Section 5.1. To this end, one may use the maximum likelihood estimator of the extreme value index and the scale parameter of the approximating GP model (provided γ > −1/2), or the moment estimators γˆn := l1,n + 1 − with

2 −1 l1,n 1 1− , 2 l2,n

sˆn :=

3 2l1,n l2,n

1 j Xn−i+1:n log . k − 1 i=1 Xn−k+1:n k−1

lj,n :=

Then an estimator for xp is given by x˜n,p := Xn−k+1:n + sˆn

(np/k)−ˆγn − 1 . γˆn

(7.7)

To construct conﬁdence intervals in an analogous way as in the restricted Pareto model, one needs suitable approximations to the distribution of these quantile estimators. Unfortunately, it turns out that the approximations have a quite diﬀerent form for heavy tailed and light tailed distributions. If F is heavy tailed (i.e., γ > 0), then the extreme quantiles are unbounded and the relative estimaxn,p /xp )) can be approximated by a normal random tion error x ˆn,p /xp − 1 (or log(ˆ variable as in the restricted Pareto model. Since for light tailed distributions (i.e., γ < 0) both the estimate and the extreme quantile to be estimated are close to the

7.4. A Time Series Approach

219

right endpoint of the distribution, the relative estimation error is of little interest. In this case, a normal approximation can be established for the standardized absolute estimation error. More precisely, assume that the extreme value index γ < 0 and the scale parameter of the GP approximation of the exceedances over Xn−k:n are estimated (k) (k) by γˆn = γˆn and sˆn = sˆn , respectively, using the maximum likelihood approach (if γ > −1/2) or the moment estimators mentioned above. Then 1/2

kn (˜ xn,p − xp ) sˆn is approximately normally distributed with mean 0 and a variance σ 2 which again is determined by the serial dependence in a complex manner.10 The limiting variance can be consistently estimated by σ ˆn2 :=

k k (i) (k)

x ˜n,p − x ˜n,p 2

i=j

(i) sˆn

(i−1/2 − k −1/2 )2

(7.8)

i=j

(i)

with sˆn denoting the estimator of the scale parameter of the GP approximation of the exceedances over Xn−i:n . Note that the estimators (7.6) and (7.8) for the approximative variances of the quantile estimators look quite diﬀerent in the cases γ > 0 and γ < 0, respectively, and likewise the resulting conﬁdence intervals do. In principle, one could ﬁrst test for the sign of the extreme value index, and then construct the conﬁdence intervals accordingly, but apparently this procedure does not work well in practice if γ is close to 0. The problem of ﬁnding good estimators of the approximative variance is aggravated by the large variability of many estimators of the extreme value index based on a small number of order statistics (cf. part 1 of the case study discussed above). Thus, the construction of reliable conﬁdence intervals remains an open problem if γ is small in absolute value.

7.4

A Time Series Approach

Often parametric dependence structures are used to model time series, because they facilitate a better interpretation of the dynamics of the time series than a non– parametric model. Moreover, usually they allow for more eﬃcient estimators. The best known examples are ARMA(p, q) models, where it is assumed that (Xt )1≤t≤n is a stationary time series satisfying Xt −

p

i=1

10 Drees,

ϕi Xt−i = Zt +

q

ϑj Zt−j ,

p + 1 ≤ t ≤ n,

(7.9)

j=1

H. (2003). Extreme quantile stimation for dependent data with applications to ﬁnance. Bernoulli 9, p. 652.

220

7. Statistics of Dependent Variables

with centered iid innovations Zt and, in addition, unknown coeﬃcients ϕ1 , . . . , ϕp and ϑ1 , . . . , ϑq . Suppose that the df FZ of the innovations has balanced heavy tails, that is, FZ ∈ D(Gγ ) for some γ > 0 and (1 − FZ (x))/FZ (−x) → p/(1 − p) as x → ∞ for some p ∈ (0, 1). Then the tail of the df of the observed time series is related to the tail of FZ as follows: 1 − FX (x) ∼ cϕ,ϑ (1 − FZ (x)),

x → ∞;

see, e.g., Datta and McCormick (1998)11 . Here cϕ,ϑ is a constant depending on (ϕ1 , . . . , ϕp , ϑ1 , . . . , ϑq ). In particular, FX ∈ D(Gγ ) and p −1 , p → 0. (7.10) (1 − p) ∼ FZ−1 1 − FX cϕ,ϑ Therefore, one may adopt two diﬀerent approaches to the tail analysis of the time series: −1 • Estimate γ and FX (1−p) directly from the observed time series as discussed in the Sections 7.2 and 7.3.

• First estimate ϕ1 , . . . , ϕp and ϑ1 , . . . , ϑq by some standard method for ARMA models, cf. [5]. In the next step, calculate the residuals Zˆt based on the ﬁtted model; for example, in an AR(p) model (i.e., if (7.9) holds with ϑ1 = · · · = ϑq = 0) let Zˆt := Xt −

p

ϕˆi Xt−i ,

p + 1 ≤ t ≤ n.

i=1

Finally, apply the classical theory for iid observations to the residuals to −1 estimate γ and FZ−1 (1 − p/cϕ, ˆ ) (as an approximation to FX (1 − p)). ˆϑ For AR(p) time series, Resnick and St˘ aric˘a12 demonstrated that the Hill estimator performs better in the second approach. A similar result was recently proved by Ling and Peng (2004)13 . To the best of our knowledge, analogous results about the corresponding quantile estimators are not known up to now. We expect that the model based tail analysis using the residuals also leads to more accurate quantile estimates, because the estimation error of the Hill estimator asymptotically determines the performance of the quantile estimators. 11 Datta, S. and McCormick, W.P. (1998). Inference for the tail parameters of a linear process with heavy tail innovations. Ann. Inst. Statist. Math. 50, 337–359. 12 Resnick, S.I. and Stˇ aricˇ a, C. (1997). Asymptotic behavior of Hill’s estimator for autoregressive data. Comm. Statist. Stochastic Models 13, 703–721. 13 Ling,

S. and Peng, L. (2004). Hill’s estimator for the tail index of an ARMA model. J. Statist. Plann. Inference 123, 279–293.

7.4. A Time Series Approach

221

However, the relationship (7.10) between the tails of FX and FZ heavily relies on the model assumptions. Hence, even a moderate deviation from the assumed model can lead to gross estimation errors. This drawback of the indirect model based approach is aggravated by the fact that, due to the lack of data, model deviations in the tails are particularly diﬃcult to detect statistically.

Quantile Estimation in AR(1) Models: a Simulation Study Consider the AR(1) model Xt = ϕXt−1 + Zt ,

2 ≤ t ≤ n = 2000,

(7.11)

with 1 − FZ (x) = FZ (−x) = 0.5(1 + x)−1/γ , x ≥ 0, ϕ = 0.8, and γ = 1/2, i.e., the positive and the negative part of the innovations have a Pareto distribution with location parameter −1. Thus p = 1/2 and in this case cϕ,ϑ = 1/(2(1 − |ϕ1 |)). −1 We aim at estimating the quantile FX (1 − p) with p = 0.001, which usually lies near the boundary of the range of observations. To calculate the true quantile approximately, we simulate a time series of length 410 000 and determine the 400th largest of the last 400 000 observations (i.e., the ﬁrst 10 000 simulated values are used as a burn-in period to approach the stationary distribution). We do this m = 10 000 times, and ﬁnally approximate the unknown true quantile by the −1 (1 − p) = 37.015 average of the m simulated order statistics, which yields FX (with estimated standard deviation 0.02). To estimate the quantile using the model based approach, we ﬁrst estimate ϕ by the sample autocorrelation at lag 1, which is the Yule-Walker-type estimator for AR(1) time series, cf. Section 6.2: n t=2 Xt−1 Xt . (7.12) ϕˆ := n 2 t=1 Xt Note that ϕˆ is a sensible estimator for ϕ even if the variance of Xt is inﬁnite and hence the autocorrelation does not exist14 . Then we calculate the residuals Zˆt := Xt − ϕX ˆ t−1 ,

2 ≤ t ≤ n.

(7.13)

−1 Finally, estimate FX (1 − p) by

(n − 1)2(1 − |ϕ|) ˆ −˜γn−1 ˆ x ˆ(2) n,p := Zn−k:n−1 k with γ˜n−1 := 14 Davis,

k−1 Zˆn−i:n−1 1

log k − 1 i=1 Zˆn−k:n−1

R.A. and Resnick, S.I. (1986). Limit theory for the sample covariance and correlation functions of moving averages. Ann. Statist. 14, 533–558.

222

7. Statistics of Dependent Variables

denoting the Hill estimator based on the k largest order statistics of these residuals. −1 (1 − p) directly using xˆn,p deﬁned in (7.4). In addition, we estimate FX The empirical root mean squared error (rmse) of these estimators (obtained in 10 000 simulations) are displayed in Fig. 7.6 as a function of k. Since these estimates of the true rmse are somewhat unstable (i.e. they change from simulation to simu (2) xˆn,p − F −1 (1 − p) lation), we also show the corresponding simulated L –errors E 1 X −1 and E x ˆn,p − FX (1 − p), which are more reliable approximations to the true errors. 100

80

60

40

20

50

100

150

200

250

300

350

400

Fig. 7.6. Empirical root mean squared error of x ˆn,p (solid (2) line) and x ˆn,p (dashed line) and the corresponding empirical L1 –errors (dotted line, resp. dash-dotted line) in the AR(1) model (7.11).

(2)

As expected, the estimator x ˆn,p based on the residuals is more accurate if k is chosen appropriately. Both the rmse and the L1 –error of the model based estimator (2) x ˆn,p is minimal for k = 50 with minimal values 15.8 and 11.2, respectively. In contrast, the optimal k is much greater for the direct estimator xˆn,p and the errors are about 80% and 40%, respectively, larger. (The minimal rmse 28.3 is attained for k = 184 and the minimal L1 –error 15.3 for k = 159.) The situation changes dramatically if we perturb the linear AR(1) model by a logarithmic term:

(7.14) Xt = ϕXt−1 + δ · sgn(Xt−1 ) log max(|Xt−1 |, 1) + Zt −1 (1 − p) to be estimated with FZ as above and δ = 0.6. Then the true quantile FX is approximately equal to 41.37 (with estimated standard deviation 0.02). Note that the logarithmic perturbation of the linear dependence structure, that aﬀects only the observations greater than 1 in absolute value, is diﬃcult to distinguish from an increase of the autoregressive parameter ϕ. Indeed, in the average the estimate ϕˆ deﬁned in (7.12) equals 0.92 in the perturbed model, and the average relative diﬀerence between the perturbed autoregressive term

ˆ t−1 is just ϕXt−1 +δ ·sgn(Xt−1 ) log max(|Xt−1 |, 1) and the ﬁtted AR(1) term ϕX 5.2%. Therefore, in the scatterplot of Xt versus Xt−1 displayed in Figure 7.7 for one simulated sample of size n = 2 000 the deviation from the linear dependence can hardly be seen. Moreover, the model deviation is also diﬃcult to detect by

7.4. A Time Series Approach

223

statistical tests. For example, the turning point test and the diﬀerence–sign test, see [5], p. 37f., to the nominal size 5% reject the null hypothesis that the residuals Zˆt deﬁned in (7.13) are iid with probability less than 6%. (Note that the more popular tests for the linear AR(1) dependence structure which are based on the sample autocorrelation function are not applicable in the present setting because the variance may be inﬁnite.) 40 30 20 10 -40

-30

-20

10

-10

-10 -20 -30

20

30

40

Fig. 7.7. Scatterplot of Xt versus Xt−1 and line through origin with slope ϕ. ˆ

-40

Fig. 7.8 shows the rmse and L1 –errors of the direct quantile estimator x ˆn,p (2) and the estimator xˆn,p which is based on the (wrong) linear AR(1) model (7.11). Now the model based estimator has minimal rmse 31.7 and minimal L1 -error 22.8 (both attained at k = 2) while the simulated errors for the direct estimator equal 14.1 (for k = 282) and 10.0 (for k = 305), respectively. Thus, for the perturbed time series, the estimation error of the model based estimator is more than double as big as the error of the direct quantile estimator, which does not rely on a speciﬁc time series model. Another disadvantage of the model based estimator is the sensitivity of its performance to the choice of k. The smallest but one L1 –error is about 30% larger than the minimal value; it is attained for k = 18. Moreover, for k > 50 the estimation error increases rapidly. Fig. 7.9 displays the estimated density of the distribution of the quantile estimators in the AR(1) model (7.11) (left plot) and the perturbed model (7.14) (right plot). Here we use kernel estimates based on the Epanechnikov kernel with bandwidth 2 applied to the simulated quantile estimates with minimal L1 –error. In the AR(1) model, the mode of the distribution of the model based estimator (2) x ˆn,p is very close to the true value, which is indicated by the vertical dotted line. The distribution of x ˆn,p has a lower mode and is also a bit more spread out. In (2) contrast, in the perturbed model (7.14) the mode of the density of x ˆn,p is much too low and the distribution is much more spread out than the distribution of x ˆn,p . In addition, the estimated density of the model based estimator is also shown for k = 18 (i.e. the value leading to the smallest but one L1 –error). Here the mode is approximately equal to the true value, but the distribution is even more spread

224

7. Statistics of Dependent Variables

100

80

60

40

20

50

100

200

150

250

300

350

400

Fig. 7.8. Empirical root mean squared error of x ˆn,p (solid (2) line) and x ˆn,p (dashed line) and the corresponding empirical L1 –errors (dotted line, resp. dash-dotted line) in the perturbed AR(1) model (7.14).

out. 0.05

0.05

0.04

0.04

0.03

0.03

0.02

0.02

0.01

0.01

50

100

150

200

100

50

150

200

(2)

Fig. 7.9. Kernel density estimates for x ˆn,p (solid line) and x ˆn,p (dashed line) with minimal the L1 –error in the AR(1) model (7.11) (left plot) and the perturbed model (7.14) (right (2) plot), where in addition, the estimated density is shown for x ˆn,p with the smallest but one L1 –error (dash-dotted line); the true values are indicated by the vertical lines.

From Fig. 7.9 it is also obvious that the distribution of the quantile estimator x ˆn,p is strongly skewed to the right. Hence it cannot be well ﬁtted by a normal distribution. Fig. 7.10 demonstrates that the normal ﬁt to the distribution of log x ˆn,p is much better. Therefore, as explained above, one should use the normal approximation to log x ˆn,p rather than a normal approximation to xˆn,p to construct conﬁdence intervals.

Non–linear Time Series Non–linear time series models are particularly popular in ﬁnancial applications. For example, various types of GARCH time series have been proposed to model returns of risky assets, cf. Section 16.7. Here we consider GARCH(1,1) time series, i.e., stationary solutions {Rt }, with t ranging over all natural numbers, of the

7.4. A Time Series Approach

225

0.035

1.2

0.03

1

0.025

0.8

0.02

0.6 0.015

0.4 0.01

0.2

0.005

50

150

100

200

2

2.5

3

3.5

4

4.5

5

5.5

6

Fig. 7.10. Kernel density estimates for x ˆn,p (solid line, left plot) and log x ˆn,p (solid line, right plot) with minimal the L1 –error in the AR(1) model (7.11) together with the densities of the normal distribution ﬁtted by minimizing the Hellinger distance (cf. Section 3.1) (dotted lines).

stochastic recurrence equations Rt

=

σ ˜ t εt ,

σ ˜t2

=

2 2 α0 + α1 Rt−1 + β1 σ ˜t−1 ,

with α0 > 0, α1 , β1 ≥ 0 and iid innovations εt with mean 0 and variance 1. Under mild conditions on the distribution of εt , the returns Rt are heavy–tailed with extreme value index γ > 0 determined by the equation E(α1 ε21 + β1 )1/(2γ) = 1, cf. page 398. If one ﬁxes the distribution of innovations, e.g., one assumes standard normal innovations, then one might estimate the extreme value index from this relationship after replacing the unknown parameters by suitable estimates, e.g., quasi maximum likelihood estimates, cf. Section 16.7. If one does not ﬁx the distribution of the innovations, then ﬁrst one must ﬁt some model to the residuals, in order to estimate γ this way. In any case, unlike for linear time series models, here the extreme value index depends on the whole distribution of the innovations. Thus any misspeciﬁcation of this distribution may lead to a serious estimation aricˇa and Pictet compared the estimates of error for γ. In an empirical study15 , Stˇ the extreme value index obtained from ﬁtting a GARCH(1,1) model with normal innovations to the returns of several exchange rates aggregated over diﬀerent time intervals with the Hill estimators applied directly to these data sets. It turned out that for almost all levels of aggregation the approach based on the GARCH model apparently underestimates the tail thickness drastically, an eﬀect which is most 15 Stˇ aricˇ a, C. and Pictet, O. (1997). The tales the tails of GARCH processes tell. Preprint, Chalmers University Gothenburg.

226

7. Statistics of Dependent Variables

likely caused by a misspeciﬁcation of the time series model (or by the choice of the estimator). However, even if the assumed GARCH model is correct, this does not help much when it comes to extreme quantile estimation. While it is known that, for symmetric innovations, P {Rt > x} ∼ cx−1/γ

as x → ∞,

no analytic expression in terms of α0 , α1 and β1 and the distribution of εt is known for the constant c > 0. Hence, in the present setting, we cannot copy the model based approach for the estimation of extreme quantiles discussed above for ARMA models. Of course, in principle, one can ﬁrst ﬁt the GARCH model and then obtain an approximation to the extreme quantile by simulation, but the simulation results obtained by Mikosch16 indicate that it can be quite computer intensive to obtain accurate approximations of extreme quantiles this way even if the model would be exactly known. In view of these drawbacks of the time series approach, the general method discussed in the Sections 7.2 and 7.3 seems the only feasible way to obtain reliable estimates of extreme quantiles. In fact, this conclusion holds true for most non– linear time series models, for which typically no simple asymptotic relationship between the tails of the innovations and the tails of the time series is available.

16 Mikosch,

T. (2003). Modeling dependence and tails of ﬁnancial time series. In: Extreme Value Theory and Applications, Finkenstadt, B. and Rootz´en, H. (eds.), Chapman and Hall, 185–286.

Chapter 8

Conditional Extremal Analysis In this chapter we provide an overview of the conditioning concept including some theoretical applications. After some heuristic arguments and technical preparations in Section 8.1. we study conditional extremes in a nonparametric and, respectively, in a parametric framework, see Sections 8.2 and 8.3. The Bayesian view towards the Bayesian estimation principle is outlined in Section 8.4. Especially, we give the standard Bayesian interpretation of the posterior density as a conditional density.

8.1

Interpretations and Technical Preparations

This section lays out heuristic arguments about the conditioning concept and collects some relevant auxiliary technical results. We make an attempt to clarify the relationships between joint distributions, conditional distributions and mixtures (shortly address as “roundabout”). In this section we also study the linear regression problem for a random design as a ﬁrst application.

Conditional Distribution Functions In Section 1.1 we introduced elementary conditional dfs, namely exceedance dfs P (Y ≤ y|Y > u) and excess dfs P (Y − u ≤ y|Y > u). In addition, the mean excess function (in other words, the mean residual life function) was determined by the means of excess dfs, cf. (2.20). In the sequel, we consider conditional probabilities of a random variable Y conditioned on the event that X = x. Generally, the conditional df F (y|x) of Y given X = x is deﬁned by an integral equation, see (8.3). In the special case, where

228

8. Conditional Extremal Analysis

P {X = x} > 0, one may compute the conditional df by F (y|x) = P (Y ≤ y|X = x) =

P {X = x, Y ≤ y} . P {X = x}

(8.1)

The joint random experiment with outcome (x, y), described by the random vector (X, Y ), can be regarded as a two–step experiment: Step 1 (initial experiment): observe x as an outcome of the random experiment governed by X. Step 2 (conditional experiment): generate y under the conditional df F (·|x) given x. Keep in mind that y can be interpreted as the second outcome in the joint experiment as well as the outcome of the conditional experiment. If X has a discrete distribution, then the joint df F (x, y) of X and Y can be regained from the distribution of X and the conditional df by

F (x, y) = F (y|z)P {X = z}. (8.2) z≤x

If X does not have a discrete distribution, then the conditional df F (·|x) is a solution of the integral equation x F (x, y) = F (y|z) dFX (z), (8.3) −∞

where FX , usually written F (x), denotes the df of X. The preceding interpretations just remain the same. Notice that (8.2) can be written in the form of (8.3). It is apparent that the df of Y is given by (8.4) F (y) = F (y|z) dFX (z). In addition, a density f (·|x) of F (·|x) is referred to as conditional density of Y given X = x. Usually, we write f (y|x) in place of f (·|x), etc.

Conditional Distributions The conditional distribution pertaining to the conditional df F (y|x) is denoted by P (Y ∈ ·|X = x).

(8.5)

Apparently, P (Y ≤ y|X = x) = F (y|x). Generally, a conditional distribution P (Y ∈ ·|X = x) has the property P {X ∈ B, Y ∈ C} = P (Y ∈ C|X = x) dL(X)(x), (8.6) B

8.1. Interpretations and Technical Preparations and, hence, also

229

P {Y ∈ C} =

P (Y ∈ C|X = x) dL(X)(x)

(8.7)

which reduces to (8.3) and (8.4) in the special case of dfs.

Basic Technical Tools for Conditional Distributions In the following lines we formulate some concepts and results for conditional dfs and related conditional densities The experienced reader may elaborate these ideas in greater generality, namely, in terms of conditional distributions and conditional densities with respect to some dominating measure. • (Computing the conditional density.) The conditional density of Y given X = x can be written as f (y|x) =

f (x, y) I(f (x) > 0). f (x)

(8.8)

Therefore, the conditional density can be deduced from the joint density f (x, y) because f (x) = f (x, y) dy and f (y) = f (x, y) dx. (8.9) • (Computing the joint density.) If f (x) is a density of F (x), then f (x, y) = f (y|x)f (x)

(8.10)

is a density of F (x, y); by induction one also gets the representation f (x1 , . . . , xn ) = f (x1 )

n

f (xi |xi−1 , . . . , x1 ),

(8.11)

i=2

where f (x1 , . . . , xn ) is the density of the df F (x1 , . . . , xn ). This indicates, extending thereby Step 2 above, that the data may be sequentially generated by conditional dfs. • (Inducing conditional distributions.) For measurable maps g, P (Y ∈ g −1 (B)|X = x) = P (g(Y ) ∈ B|X = x).

(8.12)

• (Conditioning in the case of independent random variables.) If X and Y are independent, one can prove in a direct manner that the conditional df of g(X, Y ) given X = x is the df of g(x, Y ). Thus we have P (g(X, Y ) ≤ z|X = x) = P {g(x, Y ) ≤ z}.

(8.13)

As a special case one gets that the conditional df of Y is the unconditional df, if X and Y are independent.

230

8. Conditional Extremal Analysis

• (Conditioning in the case of random vectors.) Assume that (Xi , Yi ) are iid random vectors und put X = (X1 , . . . , Xn ) and Y = (Y1 , . . . , Yn ). Then the conditional df of Y given X = x is P (Y ≤ y|X = x) =

n

P (Yi ≤ yi |Xi = xi ).

(8.14)

i=1

To prove this result, verify that the right–hand side satisﬁes the required property of the conditional distribution1 .

The Concept of Conditional Independence The random variables Y1 , . . . , Yn are called conditionally independent given X, if P (Y ≤ y|X = x) =

n

P (Yi ≤ yi |X = x).

(8.15)

i=1

Assume that the random vectors (X1 , Y1 ), . . . , (Xn , Yn ) are iid. According to (8.14), P (Y ≤ y|X = x) =

n

P (Yi ≤ yi |Xi = xi )

(8.16)

i=1

which implies that P (Yi ≤ yi |X = x) = P (Yi ≤ yi |Xi = xi ).

(8.17)

Therefore, the Yi are conditionally independent with conditional distributions P (Yi ≤ yi |X = x) = P (Yi ≤ yi |Xi = xi ).

Conditional Expectation, Conditional Variance, Conditional q–Quantile Let Y be a real–valued random variable with E|Y | < ∞ and X any further random variable. Denote again by F (y|x) the conditional df of Y given X = x. We recall some well–known functional parameters of the conditional df. • The mean

E(Y |X = x) =

y dF (·|x)(y)

(8.18)

of the conditional df is called the conditional expectation of Y given X = x. We shortly write E(Y |x) in place of E(Y |X = x) when no confusion can arise. Notice that the conditional expectation E(Y |x) is the mean within the conditional experiment described by Step 2 on page 228. 1 Presently,

we do not know an appropriate reference to the stochastical literature.

8.1. Interpretations and Technical Preparations

231

• We mention another conditional functional parameter, namely the conditional variance V (Y |x) of Y given X = x which is the variance of the conditional df. Thus, V (Y |x) is the variance in the conditional experiment. We have (8.19) V (Y |x) := (y − E(Y |x))2 dF (·|x)(y). The conditional variance can be represented by means of conditional expectations. With the help of (8.12) one gets V (Y |x) = E(Y 2 |x) − E(Y |x)2 .

(8.20)

• Later on we will also be interested in the conditional q–quantile q(Y |x) := F (·|x)−1 (q)

(8.21)

of Y given X = x as the q–quantile of the conditional df F (y|x). In addition, E(Y |X) := g(X) is the conditional expectation of Y given X, where g(x) = E(Y |x). Notice that E(Y |X) is again a random variable. Likewise, one may speak of the conditional variance V (Y |X) and conditional q–quantile q(Y |X) of Y given X.

The Linear Regression Function for a Random Design We characterize the linear regression model for a ﬁxed design as the conditional model in the corresponding random design problem. It is pointed out that the linear regression function is a conditional expectation. Later on, corresponding questions will be studied in the Sections 8.3, 9.5, 16.8 and Chapter 15, where we specify parametric statistical models in the conditional setup. First we recall some basic facts from Section 2.5 about linear regression for a ﬁxed design. Assume that the random variables Yt have the representation Yt = α + βxt + εt ,

t = 1, . . . , n,

(8.22)

with the residuals εi being independent random variables with expectations Eεt = 0, and the xt are predetermined values. Recall that g(x) = α + βx is the linear regression function with intercept α and slope β. This may be equivalently formulated in the following manner: let the Yt be independent random variables with expectations EYt = α + βxt ,

t = 1, . . . , n.

(8.23)

In the subsequent example, the xt are also random. Example 8.1.1. (Exercises and Tests.) The following illustration is based on the percentages xt of solved exercises in a tutorial and the scores yt in a written test (data set

232

8. Conditional Extremal Analysis

Table 8.1. percentages xt of solved exercises and scores yt in test xt 41.1 42 24.5 50 56.1 50.7 56.1 82.5 90.8 ... yt

0

8.5

6

3

9

5

15

11.5

17

...

exam96.dat). The maximum attainable score is 20. Some of the data are displayed in Table 8.1. In Fig. 8.1 we plot the scores yt against the percentages xt and include the estimated least squares line.

score in examination

20

10

0.0 50

100

percentage of solved exercises

Fig. 8.1. Plotting scores in examination against percentages of solved exercises and ﬁtted least squares line. For the (academic) teacher it is very satisfactory that solving exercises has a positive eﬀect for students on passing the test.

Subsequently, the xt are regarded as outcomes of random variables Xt . This leads to the random design problem. We assume that (X1 , Y1 ), . . . , (Xn , Yn ) are iid copies of a random vector (X, Y ) which has the representation Y = α + βX + ε,

(8.24)

where X, ε are independent and Eε = 0. Because X and ε are independent, we get from (8.13) that P (Y ∈ · |X = x) = L(α + βx + ε).

(8.25)

Thus, the Yt conditioned on Xt = xt are distributed as in the ﬁxed design problem.

8.1. Interpretations and Technical Preparations

233

For the conditional expectation we have E(Y |x) = α + βx

(8.26)

which is again called linear regression function. Put again X = (X1 , . . . , Xn ) and Y = (Y1 , . . . , Yn ). From (8.16) and (8.26) we know that the Yt , conditioned on X = x, are conditionally independent with conditional expectations E(Yt |xt ) = E(Yt |Xt = xt ) = α + βxt .

(8.27)

These properties correspond to those in the ﬁxed design problem. This is the reason why results for the ﬁxed design regression carry over to the random design regression. Estimation and prediction in the linear regression model for a random design will be studied at the end of this section.

The Roundabout: Joint, Conditional, and Mixture Distributions We want to explain the relationships between joint, conditional and mixture distributions in a “roundabout”:

joint df

1 PP PP PP q P mixture conditional

df

We may (i) start with a joint df F (x, y) of random variables X and Y ; (ii) decompose the joint df in the marginal df F (x) of X and the conditional df F (y|x) of Y given X = x, see (8.3); (iii) regard the conditional df and, respectively, the marginal df of X as parameterized dfs F (y|ϑ) and mixing df F (ϑ), replacing the x by ϑ, and, ﬁnally, return to (i). We provide some details concerning the last step: let F (·|ϑ) = Fϑ be a family of dfs parameterized by ϑ, and let F be a mixing df. Then, the mixture of the Fϑ with respect to F is G(y) = F (y|ϑ) dF (ϑ) = F (y|ϑ)f (ϑ) dϑ, (8.28)

234

8. Conditional Extremal Analysis

where the latter equality holds for a density f of F , see (4.8). If the integration in (8.28) is carried out from −∞ to x, then one obtains a bivariate df F (ϑ, y) as in (8.3). Therefore, one may introduce random variables X and Y with common df F (ϑ, y). Replacing ϑ by x we are in the initial situation (i) with the mixing df as df of X and the mixture df as df of Y . These arguments may be helpful to understand, e.g., the Bayesian view towards Bayesian statistics, see page 243.

Conditional Distributions of Exceedances and Order Statistics Further insight in the statistical modeling of exceedances over a threshold u and upper order statistics may be gained by conditioning on the random number K of exceedances and, respectively, on the (k + 1)st upper order statistic Xn−k:n : • the random exceedances over u conditioned on K = k are distributed as k iid random variables with common df F [u] (see [43] and [16]), • the upper order statistics Xn−k+1:n ≤ · · · ≤ Xn:n conditioned on Xn−k:n = u are distributed as the order statistics Y1:k ≤ · · · ≤ Yk:k of k iid random variables Yi with common df F [u] (see [42]). Consequently, the statistical analysis of exceedances and upper order statistics can be reduced to the standard model of iid random variables.

Analyzing Dependent Data, the Rosenblatt Transformation All the exploratory tools, like QQ–plots or sample excess functions, concern iid data. In the case of independent, not necessarily identically distributed (innid) data one my use the probability transformation to produce iid, (0, 1)–uniform data. In the case of dependent random variables one has to apply the Rosenblatt2 transformation to achieve such a result. Let (X1 , . . . , Xd ) be a random vector. Let Fi (·|xi−1 , . . . , x1 ) be the conditional df of Xi given Xi−1 = xi−1 , . . . , X1 = x1 . Assume that

P ω ∈ Ω : Fi · |Xi−1 (ω), . . . , X1 (ω) continuous, i = 1, . . . , d = 1. Then, F1 (X1 ), F2 (X2 |X1 ), . . . , Fd (Xd |Xd−1 , . . . , X1 )

(8.29)

are iid, (0, 1)–uniformly distributed random variables. 2 Rosenblatt,

M. (1952). Remarks on a multivariate transformation. Ann. Math. Statist. 23, 470–472.

8.1. Interpretations and Technical Preparations

235

The following short proof of the Rosenblatt transformation (8.29) in its general form is due to Edgar Kaufmann (personal communication), and it is worthwhile to indicate the basic idea: the joint integral is decomposed to an iterated integral (by a Fubini theorem) and the probability transformation is applied in the inner integral. First we mention these auxiliary results. (a) Probability Transformation: according to the probability transformation, see page 38, we have

I F (x) ∈ B) dF (x) = P {U ∈ B} for continuous dfs F where U is (0, 1)–uniformly distributed (b) Fubini Theorem3 : for random variables X, Y and non–negative, measurable functions f , f (x, y) dL(X, Y )(x, y) = f (x, y) P (Y ∈ dy|X = x) dL(X)(x) which is the Fubini theorem for conditional distributions. If X and Y are independent, then the conditional distribution is the distribution of Y and one gets the usual Fubini theorem. To prove the Rosenblatt transformation (8.29) it suﬃces to verify that X = (Xd−1 , . . . , X1 ) and Fd (Xd |X) are independent and Fd (Xd |X) is (0, 1)–uniformly distributed. For measurable sets A and B one gets P {X ∈ A, Fd (Xd |X) ∈ B}

= I x ∈ A I Fd (x|x) ∈ B dL(X, Xd )(x, x)

(b) I x ∈ A I Fd (x|x) ∈ B F (dx|x) dL(X)(x) = (a) =

P {X ∈ A}P{U ∈ B}

where U is (0, 1)-uniformly distributed. The proof is concluded.

Predicting a Random Variable In the following lines, we recall some basic facts about the concept of predicting (forecasting) a random variable. The aim is the prediction of a future value y of a random experiment based on an observable value g(x), where x is a realization of another experiment, and the function g describes a ﬁxed rule according to which the prediction is carried out. 3 E.g.,

G¨ anssler, P. and Stute, W. (1977). Wahrscheinlichkeitstheorie. Springer, Berlin, Satz 1.8.13.

236

8. Conditional Extremal Analysis

Clearly, one should be interested in the performance of the predictor. For that purpose, let Y and X be random variables which represent the two experiments with outcomes y and x. We predict Y by means of g(X). It is desirable that • the predictor g(X) is unbiased; that is, E(Y − g(X)) = 0, • the remainder term in the prediction is small, e.g., measured by the mean

squared loss E (Y − g(X))2 . It is well known that the conditional expectation E(Y |X) is the best predictor of Y based on X. Recall from page 230 that E(Y |X) = g(X), where g(x) = E(Y |x). If g depends on an unknown parameter—this will usually be the case—one has to replace these parameters by estimators in the prediction procedure. We provide an example in conjunction with the linear regression model.

Estimation and Prediction in the Linear Regression Model for a Random Design First we study once again the linear regression problem as speciﬁed in (8.23). Based on x = (x1 , . . . , xn ) and Y = (Y1 , . . . , Yn ) one gets the following least squares estimators n ¯) (Y − Y¯ )(xt − x t=1 n t , βˆx,Y = 2 ¯) i=1 (xt − x ¯ α ˆ x,Y = Y¯ − βˆx,Y x of the intercept α and the slope β. Plugging in these estimators into the regression function, one also gets ˆ x,Y + βˆx,Y x gˆx,Y (x) = α as an estimator of the linear regression function g(x) = α + βx. In the random design problem, see (8.27), estimate the intercept α and the slope β by the unbiased least squares estimators n ¯ (Yt − Y¯ )(Xt − X) i=1 ˆ n , βX,Y = ¯ 2 i=1 (Xt − X) ¯ (8.30) α ˆ X,Y = Y¯ − βˆX,Y X to get the unbiased estimator gˆX,Y (x) = α ˆ X,Y + βˆX,Y x

(8.31)

of the linear regression function g(x) = α + βx = E(Y |x). Based on x we want to predict the future value y. As mentioned before the conditional expectation E(Y |X) = α + βX

8.1. Interpretations and Technical Preparations

237

provides the optimal predictor of Y , yet the parameters α and β are unknown. Plugging in the estimators one gets by means of gˆx,y (x) in (8.31) a reasonable prediction of y based on the observed x, x and y . Example 8.1.2. (Continuation of Example 8.1.1.) We want predict the future score y in the test based on the known percentage x of solved exercises in the tutorial. As a prediction use the pertaining value of the estimated regression line in Fig. 8.1.

Later on we will also write Eα,β (Y |x) and Eα,β (Y |X) to indicate the dependence of the conditional expectation on the parameters α and β.

The Notion of a Predictive Distribution Occasionally, a conditional distribution is called predictive distribution, see, e.g., the book by Fan and Yao [18], page 454. One could extend this notion and generally address a random distribution as a predictive distribution. We shall use the term “predictive distribution” in a narrower sense. The conditional distribution usually includes unknown parameters, which have to be estimated, so that one can deduce a prediction of a random functional parameter such as the conditional expectation. We shall refer to this random distribution with the unknown parameters replaced by estimates—the “estimated random distribution”—as predictive distribution. The posterior distribution in the Bayesian framework, cf. Section 8.4, may also be addressed as predictive distribution, if the prior distribution does not depend on superparameters. A predictive distribution may also depend on the model choice or certain approximations, cf. Section 16.8. Example 8.1.3. (Continuation of Example 8.1.) In the linear regression set–up, where Y = α + βX + ε with X, ε being independent, we get as predictive distribution in the narrow sense (unknown parameters are replaced by the least squares estimators) by distributions of the form L(α ˆ x,y + βˆx,y x + ε). By the way, this predictive distribution is the conditional distribution of α ˆ X ,Y + βˆX ,Y X + ε

given

X = x, X = x, Y = y,

if the random vector (X, X, Y ) and the innovation ε are independent. Notice that (X, X, Y ) represents the past which can be observed by the statistician or hydrologist, etc. Therefore, the predictive distribution is observable, if, ε is speciﬁed, e.g., as a standard normal random variable.

On page 236 the performance of a predictor g(X) of Y was measured by the mean squared loss. A related measurement is possible within the framework of

238

8. Conditional Extremal Analysis

predictive distributions. The role of Y and g(X) is played by a random distribution K(·|X) and a predictive distribution K ∗ (·|X, Z), where Z represents the additional available information. Now, the performance is measured by the expected loss

E d K(·|X), K ∗ (·|X, Z) , where d is an appropriate distance. Densities of predictive distributions are called predictive densities. Diebold et al.4 address the actual conditional densities in (8.11) as “data generating process”, and the pertaining predictive densities as a sequence of density forecasts (in accordance with our terminology). Likewise one can speak of a sequence of predictive distributions.

8.2

Conditional Extremes: a Nonparametric Approach

One of the primary aims of extreme value analysis is to evaluate a higher quantile (such as a T –year threshold) of a random variable Y . In the present section we discuss such questions under the condition that the value x of a covariate X is already known. Thus, we want to estimate, for example, a higher quantile of the conditional df F (·|x) of Y given X = x (or some other parameter of the upper tail of the conditional df). The message from this section is that one may deal with conditional extremes as if we had ordinary extremes from the conditional df. For that purpose we give an outline of some technical results from the book [16], entitled Laws of Small Numbers. Let (xi , yi ) be realizations of the random vector (X, Y ). The basic idea is to base the estimation of the conditional df on those yi which belong to the xi close to the speciﬁed value x. The maximum, exceedances over a threshold u, or the k largest order statistics belonging to the selected yi may be addressed as conditional extremes (conditional sample maximum, conditional exceedances or conditional order statistics). There are two diﬀerent possibilities of selecting the xi . • (Nearest Neighbor Approach.) Take those xi which are the k closest neighbors to x. • (Fixed Bandwidth Approach.) Select those xi which are closer to x than a predetermined bandwidth b. It is understood that distances are measured with respect to the Euclidian distance, yet the subsequent results are valid in greater generality. For applications in hydrology and insurance we refer to the Sections 14.2 and 17.3. 4 Diebold,

F.X., Gunther, T.A. and Tay, A.S. (1998). Evaluating density forecasts with applications to ﬁnancial risk management. Int. Economic Review 39, 863–883.

8.2. Conditional Extremes: a Nonparametric Approach

239

The Nearest Neighbor Approach Let (X1 , Y1 ), . . . , (Xn , Yn ) be iid random vectors with common df F (x, y) and let (x1 , y1 ), . . . , (xn , yn ) be realizations. Let y1 , . . . , yk be the yi for which the pertaining xi are the k closest neighbors to x. The yi are taken in the original order of their outcome. Denote by Y1 , . . . , Yk the pertaining random variables. The Yi can be replaced by iid random variables Y1∗ , . . . , Yk∗ with common df F (·|x), if

(8.32) k = o n4/5 and, if a certain technical condition holds for the density of (X, Y ) (for details we refer to [16], Theorem 3.5.2, where the replacement is formulated in terms of the Hellinger distance). As a consequence we know that functionals like max(Y1 , . . . , Yk ) can be replaced by max(Y1∗ , . . . , Yk∗ ). Now one may construct statistical models etc. as in the unconditional case. Likewise, the exceedances of the Y1 , . . . , Yk over a threshold u can be replaced ∗ ∗ by the exceedances of the Y1 , . . . , Yk over u. A result similar to that for the maxima was deduced by Gangopadhyay5 under a condition k = o n2/3 which is stronger than (8.32). On the other hand, Gangopadhyay merely requires a local condition on the density of (X, Y ) compared to the overall condition imposed in [16], Theorem 3.5.2.

The Fixed Bandwidth Approach Assume again that there are iid random vectors (X1 , Y1 ), . . . , (Xn , Yn ) with common df F (x, y). Let y1 , . . . , yk be the yi such that |xi − x| ≤ b, where b is predetermined. The yi are taken in the original order of their outcome. Denote by Y1 , . . . , YK(n) the pertaining random variables, where K(n) is independent of the

Y1 , Y2 , Y3 , . . . . The Yi can be replaced by random variables Y1∗ , . . . , YK∗ ∗ (n) , where • Y1∗ , Y2∗ , Y3∗ , . . . is a sequence of iid random variables with common df F (·|x), • K ∗ (n) is a binomial random variable which is independent of the Yi∗ , if

b = o n−1/5

(8.33)

and, if a certain technical condition holds for the density of (X, Y ) (cf. [16], Corollary 3.1.6, where the replacement is formulated in terms of the Hellinger distance). 5 Gangopadhyay,

A.K. (1995). A note on the asymptotic behavior of conditional extremes. Statist. Probab. Letters 25, 163–170.

240

8. Conditional Extremal Analysis

As a consequence we know that functionals like max(Y1 , . . . , YK(n) ) can be replaced by max(Y1∗ , . . . , YK∗ ∗ (n) ). Now one may construct statistical models etc. as in the unconditional case. One may also deal with exceedances over a higher threshold. In addition, the binomial random variable K ∗ (n) can be replaced by a Poisson random variable with the same expectation as K ∗ (n). Then, one arrives at a Poisson process as introduced in Section 9.1.

8.3

Maxima Under Covariate Information

Contrary to the preceding section, we assume that the conditional distributions belong to a parametric family. In addition, we do not necessarily assume a linear regression framework as in Section 8.1. For example, we may assume, corresponding to (8.24), that Y = µ(X) + σ(X)ε where ε is a standard normal random innovation which is independent of a covariate (explanatory variable) X. This yields that the conditional df of Y given X = x is normal with location and scale parameters µ(x) and σ(x). Thus, we have F (y|x) = P (Y ≤ y|X = x) = Φµ(x),σ(x) (y). Such a modeling could be appropriate in Example 8.1.1. Subsequently, this idea is further developed within the framework of EV models in the present section and of GP models in Section 9.5. The use of such models was initiated in the celebrated article by Davison and Smith (cited on page 121).

A Conditional Extreme Value Model Assume that the conditional df of Y given X = x is an extreme value df, namely F (y|x) = Gγ(x),µ(x),σ(x) (y)

(8.34)

where the shape, location and scale parameters γ(x) µ(x) and σ(x) depend on x. To reduce the number of parameters we may assume that γ(x) does not depend on x, and µ(x) σ(x)

= µ0 + µ1 x, = exp(σ0 + σ1 x).

(8.35)

Therefore, we have to deal with the unknown parameters γ, µ0 , µ1 , σ0 and σ1 .

8.3. Maxima Under Covariate Information

241

Conditional Maximum Likelihood Estimation Let again X = (X1 , . . . , Xn ) and Y = (Y1 , . . . , Yn ). We assume that the Yt are conditionally independent conditioned on X with P (Yt ≤ y|X = x) = P (Yt ≤ y|Xt = xt ), see page 230. The estimation of the unknown parameters γ, µ0 , µ1 , σ0 and σ1 may be carried out by means of a conditional maximum likelihood (ML) method. The conditional likelihood function is given by L(γ, µ0 , µ1 , σ0 , σ1 ) =

n

gγ,µ(xt ),σ(xt ) (yt ).

t=1

ˆ0,x,y , µ ˆ1,x,y , σ ˆ0,x,y , σ ˆ1,x,y of the Based on the conditional MLE’s γˆx,y , µ parameters γ, µ0 , µ1 , σ0 , σ1 one also gets the estimates µ ˆx,y (x) σ ˆx,y (x)

= µ ˆ0,x,y + µ ˆ1,x,y x = exp(ˆ σ0,x,y + σ ˆ1,x,y x)

of µ(x) and σ(x). Now, replace the parameters in the EV df Gγ,µ(x),σ(x) by the estimated parameters to get an estimate of the conditional df P (Y ≤ y|X = x). For related MLEs in the pot–framework we refer to Section 9.5.

Estimating Conditional Functional Parameters In the subsequent lines we want to distinguish in a strict manner between estimation and prediction procedures. On the one hand, we estimate parameters, which may be real–valued or functions, and on the other hand, we predict random variables. In that context, we merely consider the mean and the q–quantile as conditional functional parameters. Another important parameter is, of course, the variance. Conditional Mean Function (Expectation): Eγ,µ,σ (Y |x) = zGγ,µ(x),σ(x)(dz).

(8.36)

Conditional q–Quantile Function: qγ,µ,σ (Y |x) = G−1 γ,µ(x),σ(x) (q).

(8.37)

If the conditioning is based on a covariate we also speak of a covariate conditional quantile or a covariate conditional expectation. Likewise within a time series framework, one may speak of a serial conditional quantile or a serial conditional expectation. It is apparent that the conditioning may also be based on covariate as well as serial information (a case not treated in this book).

242

8. Conditional Extremal Analysis

Estimate the conditional functions by replacing the unknown parameters by the conditional MLE’s based on x and y. For example, qγˆx,y ,ˆµx,y ,ˆσx,y (Y |x) is an estimate of the conditional q–quantile qγ,µ,σ (Y |x) for each x.

Predicting the Conditional q–Quantile In place of the factorization of the conditional expectation Eγ,µ,σ (Y |x) of Y given X = x consider the conditional expectation Eγ,µ,σ (Y |X) of Y given X. Recall that the conditional expectation is the best prediction of Y based on X with respect to the quadradic loss function. In the present context, we have to replace the unknown parameters by estimates. By EγˆX ,Y ,ˆµX ,Y ,ˆσX ,Y (Y |X) one gets a predictor of the random variables Eγ,µ,σ (Y |X) and Y based on X, Y and X. Likewise, qγˆX ,Y ,ˆµX ,Y ,ˆσX ,Y (Y |X) (8.38) is a predictor of the conditional q–quantile qγ,µ,σ (Y |X) based on X, Y and X. In the same manner, predictions in the pot–framework, in conjunction with Poisson processes of exceedances, are addressed in Section 9.5.

8.4

The Bayesian Estimation Principle, Revisited

The Bayesian estimation principle—cf. Sections 3.5 and 5.1—will be formulated in a greater generality.

An Interpretation of the Posterior Density In Section 3.5 we started with • the prior density p(ϑ) as a mixing density, and • densities L(·|ϑ) of distributions parameterized by ϑ and expressed by the likelihood function. Using these densities we may introduce the joint density L(x|ϑ)p(ϑ) of a random vector (ξ, θ), see (8.8). According to (8.8) and (8.10) one may interchange the role of ξ and θ. From the joint distribution of (ξ, θ) one may deduce the conditional density of θ given ξ = x which leads to the posterior density in (3.39) as well as in (8.41) below.

8.4. The Bayesian Estimation Principle, Revisited

243

The Bayesian Two–Step Experiment The prior distribution for the parameter ϑ is regarded as the distribution of a random variable θ with outcome ϑ. This random parameter θ describes the initial step in a two–step experiment. The distributions, represented by ϑ, in the given statistical model are regarded as conditional distributions of another random variable ξ given θ = ϑ, cf. page 233 for the “roundabout” description. Two special cases were dealt with in Section 3.5. In both cases a gamma distribution with parameters s and d served as a prior distribution. • P (ξ ∈ ·|θ = ϑ) is the common distribution of iid random variables X 1 , . . . , Xk with df Fϑ and density fϑ , and likelihood function L(x|ϑ) = i≤k fϑ (xi ). random variables with parameter λ and likelihood • The Xi are iid Poisson function L(x|λ) = i≤k Pλ {xi }. • Both previous cases are combined in the present section within a Poisson process setting with a likelihood function given in a product form. Because the prior distribution and the family of conditional distributions are speciﬁed by the statistician, the joint distribution L(ξ, θ) of ξ and θ is also known, cf. (8.10). The joint density is L(x|ϑ)p(ϑ), where p(ϑ) is a density of the prior distribution and L(x|ϑ) is the likelihood function for the given statistical model. If a statistical model of prior distributions—instead of a ﬁxed one—is speciﬁed by the statistician, then the present viewpoint also enables the estimation of the prior distribution from data. In the preceding lines we reformulated and extended a technical problem discussed in Chapter 3 within a two–step stochastical procedure. • In the initial stage there is a stochastic experiment governed by the prior distribution L(θ) which generates an unobservable outcome, namely the parameter ϑ. • Afterwards, an observation x is generated under ϑ. With respect to the total two–step experiment, the value x is governed by L(ξ). Although θ is unobservable, one gets knowledge of this random parameter in an indirect manner, namely, by means of x. The information contained in x is added to the initial information which is represented by the prior distribution L(θ). As a result, one gets the updated information expressed by the posterior distribution P (θ ∈ ·|ξ = x). This illuminates the importance of the posterior distribution in its own right.

Computing Bayesian Estimates We compute the Bayes estimate within a general framework. Let again L(θ) and p(ϑ) denote the prior distribution and prior density, respectively. We repeat some of the computations in Section 3.1 concerning the Bayes estimate.

244

8. Conditional Extremal Analysis

The MSE of an estimator T(X) of the functional parameter T (ϑ) can be written as an integral with respect to the conditional distribution of ξ given θ = ϑ. We have

2 E T (X) − T (ϑ) |ϑ = (T(x) − T (ϑ))2 P (ξ ∈ dx|θ = ϑ). Therefore, the Bayes risk with respect to a prior distribution L(θ) can be written as 2 R(p, T ) = (T (x) − T (ϑ)) P (ξ ∈ dx|θ = ϑ) L(θ)(dϑ) = (T(x) − T (ϑ))2 L(θ, ξ) (dϑdx) 2 = (T (x) − T (ϑ)) P (θ ∈ dϑ|ξ = x) L(ξ)(dx) . (8.39) Now proceed as in (3.41) to get the Bayes estimate T ∗ (x) = T (ϑ)P (θ ∈ dϑ|ξ = x).

(8.40)

Thus, we get a representation of the Bayes estimate by means of the posterior distribution P (θ ∈ ·|ξ = x). If ϑ is one–dimensional and T (ϑ) = ϑ, then T ∗ = E(θ|ξ = x) is the conditional expectation of θ given ξ = x. In fact, (8.40) is an extension of (3.38). To see this, one must compute the conditional density p(ϑ|x) of θ given ξ = x. Because L(x|ϑ)p(ϑ) is the joint density of ξ and θ one obtains p(ϑ|x) =

L(x|ϑ)p(ϑ) , L(x|ϑ)L(θ) (dϑ)

(8.41)

which is the posterior density given x (see also Section 8.1, where the “roundabout” of joint, conditional and mixture dfs is discussed in detail).

Bayesian Estimation and Prediction From (8.40) one recognizes that the Bayes estimate can be written as the conditional expectation T ∗ (x) = E(T (θ)|ξ = x). Moreover, the characteristic property of the Bayes estimate of minimizing the Bayes risk can be reformulated (cf. second line in (8.39)) as

E (T ∗ (ξ) − T (θ))2 = inf E (T(ξ) − T (θ))2 , T

where the inf ranges over all estimators T. Of course, this is a well–known property of conditional expectations.

8.4. The Bayesian Estimation Principle, Revisited

245

The property that T ∗ is the Bayes estimator for the functional T can be rephrased by saying that T ∗ (ξ) = E(T (θ)|ξ) is the best predictor of the random variable T (θ). This approach also allows the introduction of a linear Bayes estimator by taking the best linear predictor of T (θ). The conditional (posterior) distribution of T (θ) given ξ = x may be addressed as predictive distribution (cf. Section 8.1, page 237) in the Bayesian framework. This predictive distribution is known to the statistician as long as the prior distribution does not include superparameters, cf. Section 14.5.

Further Predictive Distributions in the Bayesian Framework Let (ξ, θ) be a random vector where θ is distributed according to the prior density p(ϑ). Outcomes of the random variables ξ and θ are x and the parameter ϑ. The conditional density of ξ given θ = ϑ is p(x|ϑ). From (8.41) we know that the posterior density (the conditional density of θ is given ξ = x) is given by p(ϑ|x) = p(x|ϑ)p(ϑ) p(x|ϑ)p(ϑ) dϑ . (8.42) Predictive distributions may be dealt with in the following extended framework (as described in the book by Aitchison and Dunsmore6 ): Consider the random vector (ξ, η, θ) where θ has the (prior) density p(ϑ), and ξ and η are conditional independent (conditioned on θ = ϑ) with conditional densities p(x|ϑ) and p(y|ϑ). Thus, the conditional density of (ξ, η) given θ = ϑ is p(x, y|ϑ) = p(x|ϑ)p(y|ϑ). The predictive distribution is the conditional distribution of η given ξ = x which has the density p(y|x) = p(y|ϑ)p(ϑ|x) dϑ , (8.43) where p(ϑ|x) is the posterior density in (8.42). To establish (8.43) we make use of the representation p(y|x) = p(x, y)/p(x) of the conditional density of η given ξ = x, where p(x, y) and p(x) are the densities of (ξ, η) and ξ. We have p(y|x) = = = =

p(x, y)/p(x) p(x, y|ϑ)p(ϑ) dϑ p(x) p(x|ϑ)p(y|ϑ)p(ϑ) dϑ p(x|ϑ)p(ϑ) dϑ p(y|ϑ)p(ϑ|x) dϑ .

If p(ϑ) is a conjugate prior for both conditional densities p(x|ϑ) and p(y|ϑ), then the last integrand is proportional to a density which is of the same type as the prior p(ϑ) and the integrand can be analytically computed. 6 Aitchison,

J. and Dunsmore, I.R. (1975). Statistical Prediction Analysis. Cambridge University Press, Cambridge.

246

8. Conditional Extremal Analysis

Example 8.4.1. (Predictive distributions for the restricted Pareto model.) We assume that the statistical models related to the random variables ξ and η are both restricted Pareto models with thresholds u and v. Let w1,α,0,u (xi ) p(x|α) = i≤k

and p(y|α) = w1,α,0,v (y) . As in Section 5.1 take the gamma density p(α) = hs,d (α) as a prior for the shape parameter α. Then the gamma density p(α|x) = hs ,d (α) is the posterior with respect to the p(x|α) where s = s + k and d = d + i≤k log(xi /u). For computing the predictive density p(y|x) put s∗ = s + 1 and d∗ = d + log(y/v). Writing the integrand as a gamma density we get ∞ p(y|x) = w1,α,0,v (y)hs ,d (α) dα (8.44) 0 ∞ ∗ = ds Γ(s )−1 y −1 αs −1 exp(−d∗ α) dα s ∗−s∗ −1

=

d d

=

(s + k) d +

sy

0

xi y −(s+k+1) xi s+k −1 d+ y log + log u u v

log

i≤k

i≤k

for y > v. We note an extension where η is also a vector of iid Paretian random variables. If p(y|α) is replaced by p(y|α) = w1,α,0,v (yi ) , i≤m

then the predictive density is

∗

p(y|x) = ds d∗−s

j≤m

with s∗ = s + m and d∗ = d +

j≤m

yj

−1

(s + j − 1)

j≤m

log(yj /v) for yj > v.

It would be desirable to give these ideas more scope within the extreme value setting.

Chapter 9

Statistical Models for Exceedance Processes In this chapter, Poisson processes and related processes are studied. These processes are essential for hydrological, environmental, ﬁnancial and actuarial studies in Chapters 14 to 17. In Section 9.1 the basic concepts are introduced. We particularly mention the modeling of exceedances and exceedance times by means of Poisson processes. Within the framework of Poisson processes, we reconsider the concept of a T –year level in Section 9.2. The maximum likelihood and Bayesian estimation within models of Poisson processes is addressed in Section 9.3. The explanations about the GP approximation of exceedance dfs, cf. Section 6.5, will be continued within the framework of binomial and Poisson processes in Section 9.4. An extension of the modeling by Poisson processes from the homogeneous case to the inhomogeneous one is investigated in Section 9.5.

9.1

Modeling Exceedances by Poisson Processes: the Homogeneous Case

In this section, we deal with observations occurring at random times. Especially, we have exceedance times modeled by Poisson processes. Let Ti denote the arrival time of the ith random observation Xi , where necessarily 0 ≤ T1 ≤ T2 ≤ T3 ≤ · · · . The Xi will be addressed as marks.

Homogeneous Poisson and Poisson(λ, F ) Processes The most prominent examples of arrival processes are homogeneous Poisson processes with intensity λ, where the interarrival times T1 , T2 − T1 , T3 − T2 , . . . are iid

248

9. Statistical Models for Exceedance Processes

random variables with common exponential df F (x) = 1 − e−λx ,

x ≥ 0,

with mean 1/λ. Under this condition, the arrival time Ti is a gamma random variable. The numbers of observations occurring up to time t constitute the counting process ∞

N (t) = I(Ti ≤ t), t ≥ 0. (9.1) i=1

The arrival times T1 ≤ T2 ≤ T3 ≤ · · · as well as the counting process N (t) are addressed as a homogeneous Poisson process with intensity λ (in short, as a Poisson(λ) process). Deduce from (4.7) that P {N (t) = k}

= P {Tk ≤ t, Tk+1 > t} = P {Tk ≤ t} − P {Tk+1 ≤ t} (λt)k −λt e . = k!

Hence, the number N (t) of arrival times is a Poisson random variable with parameter λt. The mean value function—describing the mean number of observations up to time t—is Ψλ (t) = E(N (t)) = λt. In addition, it is well known that the homogeneous Poisson process has independent and stationary increments, that is, N (t1 ), N (t2 ) − N (t1 ), . . . , N (tn ) − N (tn−1 ),

t 1 < t2 < · · · < tn ,

are independent, and N (tj ) − N (tj−1 ) has the same distribution as N (tj − tj−1 ). We see that the mean number of observations occurring within a time unit is

E N (t + 1) − N (t) = E(N (1)) = λ which gives a convincing interpretation of the intensity λ of a homogeneous Poisson process. The sequence {(Ti , Xi )} of arrival times and marks is a Poisson(λ, F ) process if the following conditions are satisﬁed. Poisson(λ, F ) Conditions: (a) the sequence of arrival times 0 ≤ T1 ≤ T2 ≤ T3 ≤ · · · is a Poisson(λ) process; (b) the marks X1 , X2 , X3 , . . . are iid random variables with common df F , (c) the sequences T1 , T2 , T3 , . . . and X1 , X2 , X3 , . . . are independent.

9.1. Modeling Exceedances by Poisson Processes: the Homogeneous Case

249

A justiﬁcation of such a process in ﬂood frequency studies with exponential exceedances was given by Todorovic and Zelenhasic1 . To capture the seasonality of ﬂood discharges, an extension of the present framework to inhomogeneous Poisson processes with time–dependent marks is desirable. Yet, in order not to overload this section, the introduction of such processes is postponed until Section 9.5.

Poisson Approximation of Exceedances and Exceedance Times In Section 1.2, the exceedance times τ1 ≤ τ2 ≤ τ3 ≤ · · · of iid random variables Yi over a threshold u were described in detail. Moreover, if F is the common df of the Yi , then we know that the exceedances are distributed according to the exceedance df F [u] . Exceedance times and exceedances are now regarded as arrival times and marks. If 1 − F (u) is suﬃciently small, then an adequate description of exceedance

times and exceedances is possible by means of a Poisson 1 − F (u), F [u] process. For further details see Section 9.5 and the monographs [44] and [43].

Exceedances for Poisson(λ, F ) Processes Now we go one step further and deal with exceedances and exceedance times for a Poisson(λ, F ) process of arrival times Ti and marks Xi . If only the exceedances of the Xi over a threshold v and the pertaining times are registered, then one can prove that exceedance times and exceedances constitute a Poisson λ(1 −

F (v)), F [v] process. We refer to Section 9.5 for a generalization of this result.

Mixed Poisson Processes, P´olya–Lundberg Processes We mention another class of arrival processes, namely mixed Poisson processes. Our attention is focused on P´ olya–Lundberg processes, where the mixing of homogeneous Poisson processes is done with respect to a gamma distribution. The marginal random variables N (t) of a P´ olya–Lundberg process are negative binomial random variables. Let us write N (t, λ), t ≥ 0, for a homogeneous Poisson (counting) process with intensity λ > 0. By mixing such processes over the parameter λ with respect to some density f , one obtains a mixed Poisson process, say, N (t), t ≥ 0. Recollect that a mixed Poisson process represents the following two–step experiment: ﬁrstly, a parameter λ is drawn according to the distribution represented by the density f and, secondly, a path is drawn according to the homogeneous Poisson process with intensity λ. The marginals N (t) are mixed Poisson random variables. We have P {N (t) = n} = Pλt {n}f (λ) dλ. 1 Todorovic,

P. and Zelenhasic, E. (1970). A stochastic model for ﬂood analysis. Water Resour. Res. 6, 1641–1648.

250

9. Statistical Models for Exceedance Processes

In the special case where f = fα,σ is a gamma density with shape and scale parameters α, σ > 0, one obtains a P´ olya–Lundberg process with parameters α and σ. Deduce from (3.31) that N (t) is a negative binomial random variable with parameters α and p = 1/(1 + σt). In addition, t ≥ 0,

Ψα,σ (t) = E(N (t)) = ασt,

(9.2)

is the increasing mean value function of a P´ olya–Lundberg process with parameters α and σ.

Arrival Times for Mixed Poisson Processes Let N (t), t ≥ 0 be a counting process such as a mixed Poisson process. The ith arrival time can be written Ti = inf{t > 0 : N (t) ≥ i},

i = 1, 2, 3, . . . .

The df of the ﬁrst arrival time T1 has the representation P {T1 ≤ t} = 1 − P {N (t) = 0}.

(9.3)

From (9.3) and (2.24) deduce E(T1 ) =

0

∞

P {N (t) = 0} dt.

In the special case of a P´ olya–Lundberg process with parameters α, σ > 0, one must deal with negative binomial random variables N (t) for which P {N (t) = 0} = (1 + σt)−α .

(9.4)

Hence, the ﬁrst arrival time T1 is a Pareto random variable with shape, location and scale parameters α, −1/σ and 1/σ.

9.2

Mean and Median T –Year Return Levels

Recall that the T –year return level u(T ) of a sequence of random variables is that threshold u such that the ﬁrst exceedance time τ1 = τ1,u at u is equal to T in the mean, that is, u(T ) is the solution to the equation E(τ1,u ) = T . In Section 1.2, it was veriﬁed that the ﬁrst exceedance time of iid random variables at a threshold u is a geometric random variable with parameter p = 1 − F (u) which yields u(T ) = F −1 (1 − 1/T ). In order to estimate u(T ), the unknown df F is usually replaced by an estimated EV or GP df.

9.2. Mean and Median T –Year Return Levels

251

The T –Year Return Level for Heterogeneous Variables Next, we assume that X1 , X2 , X3 , . . . are independent, not necessarily identically distributed random variables. Let Fi denote the df of Xi . The probability that the ﬁrst exceedance time τ1 at the threshold u is equal to k is P {τ1 = k} = (1 − Fk (u)) Fi (u), k = 1, 2, 3, . . . , i≤k−1

according to the ﬁrst identity in (1.17). In the heterogeneous case, it may happen that, with a positive probability, the threshold u is never exceeded. In this instance, τ1 is put equal to ∞. To evaluate the T –year return level u(T ), one must solve E(τ1,u ) = T as an equation in u, which can be written ∞

k(1 − Fk (u))

k=1

Fi (u) = T.

(9.5)

i≤k−1

This equation must be solved numerically by a Newton iteration procedure. We remark that u(T ) ≥ F −1 (1 − 1/T ), if Fi ≤ F . If E(τ1,u ) = ∞, this approach is not applicable.

The Median T –Year Return Level One may consider a diﬀerent functional parameter of the ﬁrst exceedance time τ1,u to ﬁx a T –year return level. To exemplify this idea, we compute a median of τ1,u and determine the median T –year return level u(1/2, T ). The median of τ1,u is !

k−1 p(1 − p) ≥ 1/2 med(τ1,u ) = min m : k≤m

with p = 1 − F (u). Because

k≤m

z k−1 = (1 − z m )/(1 − z), one obtains

med(τ1,u ) = log(1/2)/ log(F (u)),

(9.6)

where x is the smallest integer ≥ x. The median T –year return level u(1/2, T ) is the solution to the equation med(τ1,u ) = T. Approximately, one gets

u(1/2, T ) ≈ F −1 2−1/T ≈ F −1 (1 − (log 2)/T ).

(9.7)

Because log(2) = 0.693..., the median T –year return level is slightly larger than the mean T –year return level in the iid case. By generalizing this concept to q–quantiles of the ﬁrst exceedance time τ1,u one obtains a T –year return level u(q, T ) according to the q–quantile criterion (see also page 430).

252

9. Statistical Models for Exceedance Processes

Poisson Processes and T –Year Return Levels

When exceedances over u are modeled by a Poisson 1 − F (u), F [u] process (cf. page 249), then the ﬁrst exceedance time is an exponential random variable with expectation 1/(1 − F (u)). Therefore, the expectation and the median of the ﬁrst exceedance time are equal to a predetermined time span T for the thresholds u = u(T ) = F −1 (1 − 1/T ) and

u = u(1/2, T ) = F −1 (1 − (log 2)/T ).

Thus, when employing a Poisson approximation of the exceedances pertaining to random variables Xi as in Section 1.2, one ﬁnds the same mean T –year return level and, approximately, the median T –year return level given in (9.7). If we already start with a Poisson(λ, F ) process, then the mean and median T –year return level are (9.8) u(T ) = F −1 (1 − 1/(λT )) and

u(1/2, T ) = F −1 (1 − (log 2)/(λT )).

(9.9)

This can be veriﬁed in the following manner: As mentioned in Section 9.1, the marks exceeding v and the pertaining times constitute a Poisson λ(1−F (v)), F [v] process and, hence, the ﬁrst exceedance time is an exponential random variable with mean 1/(λ(1 − F (v))). This implies the desired result. This suggests the following approach for estimating the T –year return level. Firstly, utilize a Poisson(λ, W ) modeling for a suﬃciently large number of exceedances (over a moderately high threshold), where W is a GP df. Secondly, ˆ = N (t)/t and the GP df by W ) = Wγ ,µ ,σ . Then, estimate the intensity by λ k k k

and

ˆ )) ) −1 (1 − 1/(λT uˆ(T ) = W

(9.10)

ˆ )) ) −1 (1 − (log 2)/(λT u ˆ(1/2, T ) = W

(9.11)

are estimates of the mean and median T –year return level. In the case of clustered data, proceed in a similar manner. The T –year return level of clustered data and of the pertaining cluster maxima (cf. page 78) are close to each other and, therefore, one may reduce the analysis to the cluster maxima.

9.3

ML and Bayesian Estimation in Models of Poisson Processes

In this section we study maximum likelihood (ML) and Bayes estimators for certain Poisson processes which provide a joint model for exceedance times and ex-

9.3. ML and Bayesian Estimation in Models of Poisson Processes

253

ceedances. The primary aim is to show that the estimators of Pareto and generalized Pareto (GP) parameters, as dealt with in Section 5.1, correspond to those in the Poisson process setting.

Models of Poisson Processes We observe a random scenery up to time T . In applications this usually concerns the past T periods. For each parameter λ > 0 and each df F , let Poisson(λ, F, T ) denote the Poisson(λ, F ) process—introduced in Section 9.1—restricted to the time interval from 0 up to time T . Thus, there is a homogeneous Poisson process with intensity λ in the time scale with marks which have the common df F . Apparently, the number N (T ) of exceedances up to time T is a Poisson random variable with parameter λT . Assume that F = Fϑ is a df with density fϑ . Thus, the Poisson(λ, Fϑ , T ) process is represented by the parameter vector (λ, ϑ). In the present context the outcome of such a Poisson process is a sequence of pairs (ti , yi ), for i = 1, . . . , k, consisting of exceedance times ti and the pertaining exceedances yi over a threshold u. Notice that k is the outcome of the Poisson random variable N (T ) with parameter λT . If k = 0, then there are no observations, which happens with a positive probability.

The Likelihood Function for Poisson Process Models By specifying a likelihood function, the ML and Bayesian estimation principles become applicable. It suﬃces to determine a likelihood function up to a constant to compute the ML and Bayes estimates. One may prove (cf. [43], Theorem 3.1.1) that for every sample {(ti , yi )} the likelihood function L({(ti , yi )}|λ, ϑ) satisﬁes L({(ti , yi )}|λ, ϑ) ∝ L1 (k|λ)L2 (y|ϑ)

(9.12)

(“∝” again denotes that both sides are proportional), where

• L1 (k|λ) = (λT )k /k! exp(−λT ) is the likelihood function for the Poisson model as given in (3.50), • L2 (y|ϑ) = i≤k fϑ (yi ) is the likelihood function for the model of k iid random variables with common density fϑ as dealt with, e.g., in (3.36). One recognizes that likelihood–based estimators of λ and ϑ only depend on the data by means of k and, respectively, y = (y1 , . . . , yk ).

Maximum Likelihood Estimators for Poisson Processes with Generalized Pareto Marks To get the MLE one must ﬁnd the parameters λ and ϑ which maximize the likelihood function in (9.12). Due to the speciﬁc structure of the likelihood function in

254

9. Statistical Models for Exceedance Processes

(9.12), it is apparent that the ML procedure for Poisson processes splits up into those which were separately dealt with in the Sections 3.1 and 3.4. Because the ﬁrst factor L1 (k|λ) is independent of ϑ it can be easily veriﬁed that the MLE of λ is equal to ˆk = k/T. (9.13) λ We distinguish two diﬀerent models with respect to the parameter ϑ. • (The Restricted Pareto Model GP1(u, µ = 0).) Let ϑ = α be the unknown shape parameter in the restricted model GP1(u, µ = 0) of Pareto distribuˆk , α ˆ k (y)) is the MLE in the present Poisson tions (cf. page 116). Then, (λ process model, where α ˆ k (y) denotes the Hill estimate (cf. (5.1); also see [43], pages 142–143). • (The Generalized Pareto Model GP(u).) Let ϑ = (γ, σ) be the parameter vector in the generalized Pareto model as described on page 134. The ˆ k , γˆk (y), σ ˆk (y)), where MLE in the pertaining Poisson process model is (λ ˆk (y)) is the MLE in the GP(u) model of iid random variables of a (ˆ γk (y), σ sample of size k.

Bayes Estimators for Poisson Processes with Pareto Marks Next, we apply the concept of Bayes estimators, as outlined in Section 3.5 and further developed in the Sections 5.1 and 7.3, to certain statistical models of Poisson(λ, Fϑ , T ) processes, where Fϑ is a Pareto df represented by ϑ. An extension of that concept is required to cover the present questions, yet the calculations remain just the same. Recall from (9.12) that the likelihood function pertaining to the model of Poisson(λ, Fϑ , T ) processes satisﬁes L({(ti , yi )}|λ, ϑ) ∝ L1 (k|λ)L2 (y|ϑ). One must estimate the unknown parameters λ and ϑ. The Bayes estimate of the intensity parameter λ of the homogeneous Poisson process of exceedance times can be computed independently of ϑ if the prior density can be written as the product p(λ, ϑ) = p1 (λ)p2 (ϑ).

(9.14)

Under this condition, the posterior density is p(λ, ϑ|{(ti , yi )}) = p1 (λ|k)p2 (ϑ|y),

(9.15)

where p1 (λ|k) ∝ L1 (k|λ)p1 (λ) and p2 (ϑ|y) ∝ L2 (y|ϑ)p2 (ϑ). The Bayes estimator for a functional parameter T (λ, ϑ) = T1 (λ)T2 (ϑ)

(9.16)

9.3. ML and Bayesian Estimation in Models of Poisson Processes

255

can be represented by T({ti , yi }) = =

T1 (λ)T2 (ϑ)p1 (λ|k)p2 (ϑ|y) dλdϑ T1 (λ)p1 (λ|k) dλ T2 (ϑ)p2 (ϑ|y) dϑ .

(9.17)

We explicitly compute Bayes estimators of the intensity λ and the parameter ϑ. • If λ is estimated, then T1 (λ) = λ, T2 (ϑ) = 1 and Bayes estimate of λ is λ∗k =

T2 (ϑ)p2 (ϑ|y) dϑ = 1. The

λp1 (λ|k) dλ.

(9.18)

Speciﬁcally, if the prior p1 (λ) is the gamma density with parameters r and c, then we know from (3.53) that λ∗k =

r+k c+T

(9.19)

is the Bayes estimate of the intensity λ. • Bayes estimation of ϑ: Again, we deal with two diﬀerent models, where ϑ = α and, respectively, ϑ = (α, η) are the parameters of Paretian models. – The restricted Pareto model GP1(u, µ = 0): Bayes estimators in this Poisson–Pareto model were dealt with by Hesselager2. One gets the Bayes estimate α∗k (y) =

αp2 (α|y) dα

(9.20)

of the shape parameter α. If the prior p2 (α) is a gamma density with parameters s and d, then one obtains the Bayes estimate α∗k (y) in (5.7). – The full Pareto model GP(u) in the (α, η)–parameterization: Let ϑ = (α, η) be the parameter vector in the model of Pareto distributions in (5.10). The Bayes estimates of α and η can be written α∗k (y) = αp2 (α, η|y) dαdη (9.21)

and ηk∗ (y) 2 Hesselager,

=

ηp2 (α, η|y) dαdη

(9.22)

O. (1993). A class of conjugate priors with applications to excess–of–loss reinsurance. ASTIN Bulletin 23, 77–90.

256

9. Statistical Models for Exceedance Processes with p2 (α, η|y) as in (9.15). If p2 (α, η) = hs,d (α)f (η), as in (5.11), then one obtains the Bayes estimates α∗k (y) and ηk∗ (y) of α and η as in (5.15) and (5.16).

9.4

GP Process Approximations co–authored by E. Kaufmann3

This section provides a link between the explanations in the Sections 1.2 and 5.1 about exceedances and exceedance dfs and Section 9.1, where exceedances and exceedance times are represented by means of Poisson processes. Recall from Section 1.2 that the number of exceedances, of a sample of size n with common df F , over a threshold u is distributed according to a binomial distribution Bn,p with parameter p = F (u) = 1 − F (u). In addition, the exceedances have the common df F [u] = (F (x) − F (u))/(1 − F (u)) for x ≥ u. In Section 5.1 the actual exceedance df F [u] was replaced by a GP df W , and in Section 6.5 the remainder term in this approximation was computed under certain conditions imposed on F . In the statistical context one must simultaneously deal with all exceedances over the given threshold u.

Binomial Processes Representation of Exceedances Processes First, the exceedances will be represented by a binomial process. Binomial(n, p, F [u] ) Conditions: Let (a) Y1 , Y2 , Y3 , . . . be iid random variables with common df F [u] , (b) K(n) be a binomial random variable with parameters n and p = F (u), which is independent of the sequence Y1 , Y2 , Y3 , . . . . The actual exceedances can be distributionally represented by the sequence Y1 , Y2 , Y3 , . . . , YK(n)

(9.23)

which can be addressed as binomial process.

Binomial Process Approximation Next, the actual binomial process in (9.23) will be replaced by another binomial process Z1 , Z2 , Z3 , . . . , ZK(n) (9.24) 3 University

of Siegen; co–authored the 2nd edition.

9.4. GP Process Approximations

257

where F [u] is replaced by W [u] . Recall that W [u] is again a GP df if W is a GP df. Let F and W have the densities f and w. In addition, assume that ω(F ) = ω(W ). According to [16], Corollary 1.2.4 (iv), such an approximation holds with a remainder term bounded by

1/2 [u] [u] (9.25) H f ,w , ∆F (n, u) := nF (u) where H is the Hellinger distance, cf. (3.4), between f [u] and w[u] . More precisely, one gets in (9.25) a bound on the variational distance between the point processes pertaining to the sequences in (9.23) and (9.24). Under condition (6.35) we have 1/δ

(9.26) H f [u] , w[u] = O W (u) , and, therefore, because (6.33) also holds, (2+δ)/2δ (u) . ∆F (n, u) = O n1/2 W

(9.27)

For example, if u is the (1 − k/n)–quantile of W —with k denoting the expected number of exceedances over u—then the right–hand side in (9.27) is of order k 1/2 (k/n)1/δ .

Von Mises Bounds We mention the required modiﬁcations if condition (6.35) is replaced by the conditions (6.41) and (6.42). The upper bound on the binomial process approximation, with w[u] replaced by wγ,u,σ(u) , is

1/2 [u] H f , wγ,u,σ(u) ∆F (n, u) = nF (u)

1/2

η F (u) = O nF (u) (9.28) in analogy to (9.27) with σ(u) as in (6.45). Thus, the exceedances under the actual df F [u] can be replaced by GP random variables with common df Wγ,u,σ(u) within the error bound in (9.28). For example, if F is the Gompertz df and u = F −1 (1 − k/n), then

∆F (n, u) = O k −1/2 / log n .

Penultimate Approximation The corresponding upper bound for the penultimate approximation to the exceedances process, with wγ,u,σ(u) replaced by wγ(u),u,σ(u) , is

1/2 [u]

H f , wγ(u),u,σ(u) ∆F (n, u) = nF (u)

1/2

(9.29) τ F (u) = O nF (u)

258

9. Statistical Models for Exceedance Processes

under the conditions (6.41) and (6.46).

A Poisson Process Approximation One gets a Poisson process instead of a binomial process if the binomial random variable with parameters n and p is replaced by a Poisson random variable with parameter λ = np. The remainder term of such an approximation, in terms of the variational distance, is bounded by p, see [43], Remark 1.4.1.

9.5

Inhomogeneous Poisson Processes, Exceedances Under Covariate Information

In this section we model • frequencies of occurance times by means of an inhomogeneous Poisson process, and • magnitudes by stochastically independent, time–dependent marks which are distributed according to generalized Pareto (GP) dfs. A parametric modeling for the marks is indispensable to achieve the usual extrapolation to extraordinary large data.

Inhomogeneous Poisson and Poisson(Λ, F ) Processes We extend the concept of a Poisson(λ, F ) process (cf. page 248) in two steps. Firstly, the intensity λ is replaced by a mean value function Λ or an intensity function (also denoted by λ) and, secondly, the df F of the marks is replaced by a conditional df F = F (·|·). Poisson(Λ, F ) Conditions: (a) (Poisson(Λ) Process.) Firstly, let 0 ≤ T1 ≤ T2 ≤ T3 ≤ · · · be a Poisson(1) process (a homogeneous Poisson process with intensity λ = 1, cf. page 248). Secondly, let Λ be a nondecreasing, right–continuous function deﬁned on the positive half–line [0, ∞) with Λ(0) = 0 and limt→∞ Λ(t) = ∞. Deﬁne the generalized inverse Λ−1 corresponding to the concept of a qf, see (1.64). Then, the series τi = Λ−1 (Ti ), i ≥ 1 or, equivalently, the counting process ∞

N (t) = I(τi ≤ t), t ≥ 0, i=1

can be addressed as an inhomogeneous Poisson process with mean value function Λ.

9.5. Exceedances Under Covariate Information

259

(b) (Conditional Marks.) Given occurrence times ti consider random variables Xti with df F (·|ti ). Thus, we have marks which distributionally depend on the time at which they are observed. One can verify that N (t) is a Poisson random variable with expectation Λ(t) which justiﬁes the notion of Λ as a mean value function. Moreover notice that there is a homogeneous Poisson process with intensity λ if Λ(t) = λt. If a representation b λ(x) dx = Λ(b) − Λ(a) holds, then λ(x) is called the intensity function of Λ. a This two–step random experiment constitutes a Poisson(Λ, F ) process. The reader is referred to [43], Corollary 7.2.2, where it is shown, in a more general setting, that such a process is a Poisson point process with intensity measure t F (y|z) dΛ(z). (9.30) ν([0, t] × [0, y]) = 0

One obtains a Poisson(λ, F ) process as a special case if Λ(t) = λt and F (·|t) = F .

An Exceedance Process as an Inhomogeneous Poisson Process Given a Poisson(Λ, F ) process, the marks exceeding the threshold u and the pertaining exceedance times form a Poisson(Λu , F [u] ) process, where t (1 − F (u|s)) dΛ(s) (9.31) Λu (t) = 0

is the mean value function of the exceedance times, and

F [u] (w|t) = F (w|t) − F (u|t) 1 − F (u|t) ,

w ≥ u,

(9.32)

are the conditional dfs of the exceedances. In terms of Poisson point processes, cf. end of this section, this can be formulated in the following manner: if ν is the intensity measure pertaining to the Poisson(Λ, F ) process, then the truncation of ν outside of [0, ∞) × [u, ∞) is the intensity measure pertaining to the Poisson(Λu, F [u] ) process (of the truncated process).

Densities of Poisson Processes For the speciﬁcation of likelihood functions one requires densities of Poisson processes with domain S in the Euclidean d–space. Let N0 and N1 be Poisson processes on S with ﬁnite intensity measures ν0 and ν1 ; thus, ν0 (S) < ∞ and ν1 (S) < ∞ (cf. end of this section). If ν1 has the ν0 –density h, then L(N1 ) has the L(N0 )–density g with g({yi }) =

k i=1

h(yi ) exp ν0 (S) − ν1 (S) ,

(9.33)

260

9. Statistical Models for Exceedance Processes

where k is the number of points yi , see, e.g., [43], Theorem 3.1.1, for a general formulation.

Statistical Modeling of the Exceedance Process We start with independent random variables Yt with dfs F (y|t) and densities f (y|t) for t = 1, . . . , n. We implicitly assume that the dfs depend on some unknown parameter. The discrete time points t = 1, . . . , n are replaced by a homogeneous Poisson process on the interval [0, n] with intensity λ = 1 (this is motivated by weak convergence results for empirical point processes). The random variables Yt are regarded as marks at t. Combining the random time points and the marks on gets s a two–dimensional Poisson process with intensity measure ν([0, s] × [0, y]) = F (y|t) dt as in (9.30). 0 The exceedances above the threshold u and the pertaining exceedance times form a Poisson(Λu, F [u] ) process as speciﬁed in (9.31) and (9.32) with Λ(t) = t. The intensity measure of the Poisson(Λu, F [u] ) process is given by s F [u] (y|t) dΛu (t) νu ([0, s] × [u, y]) = 0

n

and, therefore, νu (S) = 0 (1 − F (u|t)) dt where S = [0, n]× [u, ∞). One may check that the Lebesgue density of νu is hu (t, y) = f (y|t),

(t, y) ∈ [0, n] × [u, ∞).

by changing the order of integration. Such a model will be applied in Section 14.2 to compute the T –year ﬂood level in ﬂood frequency analysis. Next we also specify a likelihood function for such processes which enables, e.g., the computing of MLEs in an exceedance model under covariate information.

A Likelihood Function for the Exceedance Process The likelihood function of the Poisson(Λu , F [u] ) process, as a function of the parameter which is suppressed in our notation, is given by k n f (yti |ti ) exp − (1 − F (u|t)) dt , (9.34) L({(yti , ti )}|·) ∝ i=1

0

where k is the number of exceedances yti , and the ti are the pertaining exceedance times4 . 4 To make (9.33) applicable, one has to use a density with respect to a ﬁnite measure which is equivalent to the Lebesgue measure. This entails that a factor is included in the representation of the density which does not depend on the given parameters and is, therefore, negligible in (9.34).

9.5. Exceedances Under Covariate Information

261

The dfs F (y|t) are merely speciﬁed fort = 1, . . . , n and, therefore, the integral n (1 − F (u|t)) dt in (9.34) is replaced by t=1 (1 − F (u|t)). Notice that the term 0 1 − F (u|t) represents the exceedance probability at time t. Also notice that the likelihood function L is merely evaluated for exceedance times ti ∈ {1, . . . , n} in conjunction with the pertaining exceedances yi . n

An Application to Exceedances under Covariate Information Corresponding to (8.34), where EV dfs are studied, assume that the conditional df of Y given X = x is equal (or close to) a generalized Pareto (GP) df for values y above a higher threshold u. More precisely, let P (Y ≤ y|X = x) = Wγ,µ(x),σ(x) (y),

y > u,

(9.35)

where the location and scale parameters µ(x) and σ(x) are given as in (8.35). We take µ(x)

=

µ0 + µ1 x,

σ(x)

=

exp(σ0 + σ1 x).

(9.36)

Also assume that the Yt are conditionally independent by conditioning on the covariate vector X with P (Yt ≤ y|X = x) = =

P (Yt ≤ y|Xt = xt ) Wγ,µ(xt ),σ(xt ) (y),

y > u,

(9.37)

cf. (8.15) to (8.17), where such a condition is deduced for iid random pairs (Xt , Yt ). Next the ML procedure in (9.34) is applied to dfs F (y|t) = Wγ,µ(xt ),σ(xt ) (y),

y > u.

Put y = (yt1 , . . . , ytk ) and x = (x1 , . . . , xn ), where the yti are the exceedances above the threshold u. As in Section 8.3, one obtains conditional MLEs γˆx,y , µ ˆx,y (x), σ ˆx,y (x) of the parameters γ, µ(x) and σ(x). Other estimation procedures should be made applicable as well. We remind on the estimation of a trend • in the location parameter of EV dfs, see pages 113–116, • in the scale parameter of GP dfs, see pages 139–141. In this context one should also study moment or L–moment estimators. Such estimators may serve as initial values in the ML procedure. For larger q, one gets an estimate of the covariate conditional q–quantile −1 (q) qγ,µ,σ (Y |x) = Wγ,µ(x),σ(x)

given X = x by means of qγˆx,y ,ˆµx,y ,ˆσx,y (Y |x).

(9.38)

262

9. Statistical Models for Exceedance Processes

Predicting the Conditional q–Quantile We may as well deﬁne the covariate conditional q–quantile qγ,µ,σ (Y |X). Plugging in the estimators of the unknown parameters as in (8.38) one gets a predictor of qγ,µ,σ (Y |X).

A Poisson Process Modeling of Financial Data The modeling of higher excesses of returns by means of Poisson processes under covariate information (explanatory variables) was used by Tsay5 to investigate the eﬀect of changes in U.S. daily interest rates on daily returns of the S&P 500 index, and a covariate conditional Value–at–Risk (VaR). We refer to Section 16.8, where a serial conditional VaR is studied within the framework of GARCH time series. An application of the present Poisson process modeling under covariate information to environmental sciences may be found in Chapter 15.

The General Notion of a Poisson Process In Section 9.1, we started with the notion of a homogeneous Poisson process, denoted by Poisson(λ), with intensity λ. By adding marks one gets a Poisson(λ, F ) process. Using a transformation in the time scale by means of a mean value function Λ one gets the inhomgeneous Poisson process Poisson(Λ, F ). We also employed the notion of an intensity measure which presents the mean number of points in a measurable set. Generally, one may deﬁne a Poisson process for every ﬁnite or σ–ﬁnite measure ν on a measurable space S, see [43]. This measure is again called intensity measure. The Poisson process is denoted by Poisson(ν). In textbooks it is usually assumed that the underlying space S is Polish or a locally compact Hausdorﬀ space with a countable base, yet these conditions are superﬂuous for the deﬁnition of a Poisson process.

5 Tsay,

R.S. (1999). Extreme value analysis of ﬁnancial data. Working paper, Graduate School of Business, University of Chicago; also see Section 7.7 in Tsay, R.S. (2002). Analysis of Financial Time Series. Wiley, New Jersey.

Part III

Elements of Multivariate Statistical Analysis

Chapter 10

Basic Multivariate Concepts and Visualization This chapter provides a short introduction to several probabilistic and statistical concepts in the multivariate setting such as, e.g., dfs, contour plots, covariance matrices and densities (cf. Section 10.1), and the pertaining sample versions (cf. Section 10.2) which may be helpful for analysing data. Decomposition procedures of multivariate distributions by means of univariate margins and multivariate dependence functions, such as copulas, are studied in Section 10.3.

10.1

An Introduction to Basic Multivariate Concepts

This section provides the multivariate versions of distribution functions (dfs), survivor functions and densities besides the notation.

Notation Subsequently, operations and relations for vectors are understood componentwise. Given row vectors a = (a1 , . . . , ad ) and b = (b1 , . . . , bd ), let max{a, b} = (max{a1 , b1 }, . . . , max{ad bd }), min{a, b} = (min{a1 , b1 }, . . . , min{ad bd }), ab = (a1 b1 , . . . , ad bd ), a + b = (a1 + b1 , . . . , ad + bd ), a/b = (a1 /b1 , . . . , ad /bd ),

if bi = 0.

266

10. Basic Multivariate Concepts and Visualization

If a real value is added to or subtracted from a vector, then this is done componentwise. Likewise, let a/b = (a1 /b, . . . , ad /b) for a real value b = 0. Furthermore, relations “≤”, “<”, “≥”, “>”, etc. hold for vectors if they are valid componentwise; e.g., we have a ≤ b, if aj ≤ bj for j = 1, . . . , d or a < b, if aj < bj for j = 1, . . . , d. These summations and relations can be extended to matrices in a straightforward manner. Occasionally, we also use the multiplication of matrices that is diﬀerent from the multiplication of row vectors as

mentioned above: for a d1 × d2 – matrix A = (ai,j ) and a d2 ×d3 –matrix B = bj,k , we have AB = j≤d2 ai,j bj,k . Especially, ab = j≤d aj bj for vectors a and b, where b is the transposed vector of a, that is, b is written as a column vector. More generally, A denotes the transposed of a matrix A.

Multivariate Distribution and Survivor Functions The reader should be familiar with the notions of a d–variate df, a d–variate density and the concept of iid random vectors X1 , . . . , Xm with common df F . The df of a random vector X = (X1 , . . . , Xd ) is F (x) = P {X ≤ x} = P {X1 ≤ x1 , . . . , Xd ≤ xd } for x = (x1 , . . . , xd ). If X1 , . . . , Xd are independent, then F(j) (xj ), F (x) =

(10.1)

j≤d

where F(j) is the df of Xj . If X1 , . . . , Xd are identically distributed and totally dependent—hence, the Xi are equal to X1 with probability one—then F (x)

= P {X1 ≤ x1 , . . . , X1 ≤ xd } = F(1) (min{x1 , . . . , xd }).

(10.2)

The d–variate survivor function corresponding to the df F is given by F (x) = P {X > x} = P {X1 > x1 , . . . , Xd > xd }. Survivor functions will be of importance in multivariate extreme value analysis (as well as in the univariate setting, where a simpler representation of results for minima was obtained by survivor functions).

Mean Vector and Covariance Matrix For characterizing the df of a random vector X = (X1 , . . . , Xd ), the mean vector m = (m1 , . . . , md ) = (EX1 , . . . , EXd )

10.1. An Introduction to Basic Multivariate Concepts

267

and the covariance matrix Σ = σj,k are important, where the covariances are given by

σj,k = Cov(Xj , Xk ) = E (Xj − mj )(Xk − mk ) , whenever the covariance exists (cf. (2.52)). Notice that σj,j = σj2 is the variance of Xj . One gets the correlation coeﬃcients by ρj,k = σj,k /(σj σk ). Note that the correlation coeﬃcient ρj,k ranges between −1 and 1. Random variables Xj and Xk are uncorrelated if ρj,k = 0. This condition holds if Xj and Xk are independent and the second moments are ﬁnite. If Xj = Xk or Xj = −Xk with probability 1, then ρj,k = 1 or ρj,k = −1.

Kendall’s τ For characterizing the dependence structure of a random vector X = (X1 , . . . , Xd ) one may also use Kendall’s τ in place of the covariance. One of the advantages of Kendall’s τ is that the second moments need not be ﬁnite. Let Y = (Y1 , . . . , Yd ) be another random vector which is distributional equal to X, and let X and Y be independent. Then, deﬁne τj,k = P {(Yj − Xj )(Yk − Xk ) > 0} − P {(Yj − Xj )(Yk − Xk ) < 0} .

(10.3)

Marginal Distribution and Survivor Functions In (10.1) and (10.2), we already employed the jth margin df F(j) of a d–variate df F . Generally, let FK (x) = P {Xk ≤ xk , k ∈ K} for any set K of indices between 1 and d. Thus, we have F(j) (xj ) = F{j} (x). Apparently, FK can be deduced from F by letting xj tend to inﬁnity for all indices j not belonging to K. Likewise, the margins FK of a survivor function F are deﬁned by FK (x) = P {Xk > xk , k ∈ K}. One reason for the importance of survivor functions is the following representation of a d–variate df F in terms of marginal survivor functions FK . We have

(10.4) (−1)j+1 FK (x). 1 − F (x) = Likewise, we have 1 − F (x) =

j≤d

|K|=j

j≤d

(−1)j+1

|K|=j

FK (x).

(10.5)

268

10. Basic Multivariate Concepts and Visualization

To verify (10.4) and (10.5), one must apply an additivity formula (see, e.g., (4.4) in [16]). Finally, we remark that F is continuous if the univariate margins F(j) are continuous. Deduce from (10.4) and (10.5) that F (x1 , x2 ) = F1 (x1 ) + F2 (x2 ) + F (x1 , x2 ) − 1

(10.6)

F (x1 , x2 ) = F1 (x1 ) + F2 (x2 ) + F (x1 , x2 ) − 1

(10.7)

and for bivariate dfs F with margins F1 and F2 .

Multivariate Densities If a df F has the representation x F (x) = f (x) dx = −∞

xd

−∞

···

x1 −∞

f (x1 , . . . , xd ) dx1 · · · dxd ,

(10.8)

where f is nonnegative, then f is a (probability) density of F . A necessary and suﬃcient condition that a nonnegative f is the density of a df is ∞ f (x) dx = 1. (10.9) f (x) dx := −∞

If the random variables X1 , . . . , Xd are independent again and Xi possesses a density fi , we see that fi (xi ) (10.10) f (x) = i≤d

is a joint density of the X1 , . . . , Xd . Under certain conditions, a density can also be constructed from a given df F by taking partial derivatives1 : if the d–fold partial derivative f (x) =

∂d F (x) ∂x1 · · · ∂xd

(10.11)

is continuous, then f is a density ofF . It is suﬃcient that the given condition holds in an open rectangle (a, b) = j≤d (aj , bj )—or, generally, an open set U — possessing the probability 1. Then, put f = 0 outside of (a, b) or U . If the df F has a density f , then the survivor function F can be written ∞ ∞ ∞ f (x) dx = ··· f (x1 , . . . , xd ) dx1 · · · dxd . (10.12) F (x) = x

xd

x1

From this representation, as well as from (10.5), one realizes that the density f can also be deduced from the survivor function by taking the d–fold partial derivative. 1 See

Theorem A.2.2 in Bhattacharya, R.N. and Rao, R.R. (1976). Normal Approximation and Asymptotic Expansions. Wiley, New York.

10.1. An Introduction to Basic Multivariate Concepts

269

Contour Plots of Surfaces, Bivariate Quantiles Another indispensable tool for the visualization of a bivariate function f is the contour plot which consists of lines {(x, y) : f (x, y) = q} for certain values q. The illustration in Fig. 10.1 concerns a bivariate normal density which will be introduced in Section 11.1. 3

0

Fig. 10.1. Contour plot of the bivariate normal density with correlation coeﬃcient ρ = 0.5.

-3 -3

0

3

For a bivariate df F , the line {(x, y) : F (x, y) = q} may be addressed as the q–quantile of F . Therefore, a contour plot of a df F displays a certain collection of quantiles. Likewise, one may deal with upper p–quantiles {(x, y) : F (x, y) = p} pertaining to the survivor function.

2

2

1

1

0.0

0.0

-1

-1

-2

-2 -2

-1

0

1

2

-2

-1

0

1

2

Fig. 10.2. Contour plots of the bivariate normal distribution with correlation coeﬃcient ρ = 0.5. (left.) Quantiles of df for q = i/10 with i = 1, . . . , 9. (right.) Quantiles of survivor function for p = i/10 with i = 1, . . . , 9.

270

10.2

10. Basic Multivariate Concepts and Visualization

Visualizing Multivariate Data

In this section we introduce the sample versions of multivariate dfs, covariances, densities and also contour plots. Moreover, we display diﬀerent versions of scatterplots for trivariate data. Remarks about handling missing components in a vector of data are added.

Multivariate Sample Distribution and Survivor Functions For d–variate data x1 , . . . , xn , the sample df is Fn (x) =

1

I(xi ≤ x). n

(10.13)

i≤n

If x1 , . . . , xn are governed by a d–variate df F , then the sample df Fn (x) provides an estimate of F (x) as in the univariate case. An illustration of a bivariate df may be found in Fig. 12.1. A related remark holds for the sample survivor function which is deﬁned by Fn (x) =

1

I(xi > x). n

(10.14)

i≤n

The 2–dimensional sample df and survivor function must be plotted in a 3–D plot. A simpliﬁed representation is achieved by using sample contour plots as dealt with below.

Sample Mean Vector, Sample Covariances The sample versions of the mean vector m and the covariance matrix (σj,k )—based on d–variate data x1 , . . . , xn with xi = (xi,1 , . . . , xi,d )—are • the vector mn of the componentwise taken sample means mj,n =

1

xi,j , n

(10.15)

i≤n

• the matrix of sample covariances (cf. also (2.53)) sj,k,n =

1

(xi,j − mj,n )(xi,k − mk,n ). n−1

(10.16)

i≤n

For the sample variances we also write s2j,n in place of sj,j,n . In addition, the sample correlation correlations ρj,k,n = sj,k,n /(sj,j,n sk,k,n )1/2 .

(10.17)

10.2. Visualizing Multivariate Data

271

Bivariate Sample Contour Plots The contour plots of sample df Fn and sample survivor function Fn are estimates of the contour plots of the underlying df F and survivor function F . Thus, in the case of the sample survivor function one is computing lines of point t which admit an approximately equal number of points xi > t. 8

7

6

y

5

4

3

Fig. 10.3. 2–dimensional data and a contour plot of the sample survivor function.

2

1

0 0

1

2

4

3

5

6

8

7

x

As in the continuous case, one is evaluating the surface of the sample functions on a rectangular grid, and the approximate contours are computed by interpolation. For the details we refer to the book by Cleveland [8], pages 242–241.

Multivariate Kernel Density Let k be a univariate kernel as presented in Section 2.1. Using such univariate kernels as factors one gets a d–variate kernel by u(x) = j≤d k(xj ). In analogy to (2.14), deﬁne a d–variate kernel density fn,b at x by 1 xj − yi,j fn,b (x) = d k (10.18) nb b i≤n j≤d

based on d–variate data y i = (yi,1 , . . . , yi,d ), where b > 0 is a smoothing parameter. Note that (10.18) can be written x − yi 1

fn,b (x) = d u . (10.19) nb b i≤n

In this formula, the special kernel u(x) =

j≤d

k(xj )

272

10. Basic Multivariate Concepts and Visualization

0.2

0.2 z

2 0 x

-2

-2

2 0

0 2

0.1

z

0.1 -2

y

x

0 2

-2

y

Fig. 10.4. (left.) 3–D plot of bivariate normal density with correlation coeﬃcient ρ = 0.5. (right.) 3–D plot of kernel density based on 100 bivariate normal data with the bandwidth b = .5 (based on a bivariate normal kernel).

can be replaced by any d–variate probability density. Modiﬁcations of this construction are necessary if the data exhibit a certain direction. Then, it is useful to consider a kernel u that mimics the shape of the data set. This question can also be dealt with in conjunction with data sphering and principle component analysis2 .

Bounded Kernel Density Subsequently, we study bivariate data y i = (yi,1 , yi,2 ) for i = 1, . . . , n. As in the univariate case, we try to prevent a smoothing of the data beyond certain boundaries. One may assume that the ﬁrst or second component is left or right– bounded. First, let us assume that the ﬁrst component is left bounded by a1 , that is, yi,1 ≥ a1 for i = 1, . . . , n. For this case, a plausible kernel density may be constructed in the following manner: = 2a1 − yi,1 ; 1. reﬂect the yi,1 in a1 obtaining values yi,1

2. apply the preceding kernel density fn,b to the new enlarged data set consist ing of (yi,1 , yi,2 ) and (yi,1 , yi,2 ) for i = 1, . . . , n, 3. restrict the resulting curve to [a1 , ∞) × (−∞, ∞). If the ﬁrst component is also right–bounded by a2 > a1 , reﬂect the yi1 also in a2 and proceed as before. Of course, the order of these two steps can be interchanged. If this is necessary, continue this procedure in the second component, whereby one must start with the enlarged data set. 2 Falk,

M., Becker, R. and Marohn, F. (2002). Foundations of Statistical Analyses and Applications with SAS. Birkh¨ auser, Basel.

10.2. Visualizing Multivariate Data

273

The 3–D Scatterplot As in the 2–dimensional case the 3–dimensional scatterplots provide an indispensable tool to get a ﬁrst impression of a data set. We include two versions of a 3–dimensional scatterplot.

2 0 z -2 -2

2 x0

0 2

Fig. 10.5. A scatterplot of 50 trivariate normal data.

y

-2

The facility to rotate such a scatterplot around the z–axis makes it particularly valuable. Next, the 3–D scatterplot is once more applied to trivariate data where, however, the ﬁrst and second components describe the site of a spatial measurement.

-2

2 0 x

0 2

-2

Fig. 10.6. A scatterplot of sites and measurements.

y

Contourplots, surface plots and scatterplots are available within the multivariate part of the menu system of Xtremes.

274

10. Basic Multivariate Concepts and Visualization

Missing Data In conjunction with censored data, the question of handling missing data was solved by deﬁning appropriate statistical models and by applying model–based procedures. Subsequently, we deal with the situation where one or several components of an observation vector are missing (assuming that this happens in an irregular manner). Simply discarding the incompletely recorded observation vector will entail the loss of information, a consequence which should be avoided particularly for samples of smaller sizes. The proposed ﬁlling–in procedure for missing values is a nearest–neighbor method that is related to the stochastic regression imputation discussed in the book by Little and Rubin3 . For simplicity, let us assume that xl = (xl,1 , . . . , xl,d−1 , ·) is a vector such that (d) only the dth component is missing. Put xl = (xl,1 , . . . , xl,d−1 ). Fix a number k. From those vectors without a missing component, select xi1 , . . . , xik such that (d) (d) (d) xi1 , . . . , xik are the k nearest neighbors of xl . Finally, a dth component xl,d is added to xl which is randomly chosen from the dth components xi1 ,d , . . . , xik ,d . Notice that this is a sampling procedure according to a conditional sample df (cf. [16], pages 96–98). Likewise, missing values in other components are ﬁlled in and the completed data are analyzed by standard methods. Example 10.2.1. (Annual Wind–Speed Maxima: Continuation of Examples 1.2.1 and 2.1.3.) We deal with the annual wind–speed maxima (in km/hr) based on hourly measurements at ﬁve Canadian stations (located at Vancouver, Regina, Toronto, Montreal and Shearwater) from 1947 to 1984. The wind–speeds at Shearwater from 1947 to 1949 are not recorded. Thus, if the incompletely recorded vectors are discarded, a sample of size 35 remains. The following table only contains the data for the years 1947 to 1951. The missing values were generated by means of the nearest–neighborhood algorithm with k = 5. Table 10.1. Annual wind–speed maxima from 1947 to 1951 with ﬁlled–in values. Maximum wind speed (km/h)

3 Little,

Year

Vancouver

Regina

Toronto

Montreal

Shearwater

1947

79.5

88.8

79.5

120.2

(85.1)

1948

68.4

74.0

75.8

74.0

(79.5)

1949

74.0

79.5

88.8

64.8

(68.4)

1950

59.2

74.0

96.2

77.7

64.8

1951

74.0

79.5

72.1

61.0

79.5

R.J.A. and Rubin, D.B. (1987). Statistical Analysis with Missing Data. Wiley, New York.

10.3. Decompositions of Multivariate Distributions

10.3

275

Decompositions of Multivariate Distributions

Let X = (X1 , . . . , Xd ) be a random vector with df F . In this section we describe some procedures in which manner the df F can be decomposed into certain univariate dfs and a multivariate df where the latter df represents the dependence structure. Thereby, one may separately analyze and estimate certain univariate components and the multivariate dependence structure. The piecing together of the diﬀerent estimates yields an estimate of F .

Copulas Assume that the univariate marginal dfs Fj are continuous (which implies that F is continuous). By applying the probability transformation as introduced on page 38, the random variables Xj can be transformed to (0, 1)–uniform random variables. The df C of the vector Y of transformed random variables Yj = Fj (Xj ) is called the copula pertaining to F . We have, C(u) = P {Y1 ≤ u1 , . . . , Yd ≤ ud }

= F F1−1 (u1 ), . . . , Fd−1 (ud ) ,

(10.20)

where Fj−1 is the qf of Fj . In addition, Y may be addressed as copula random vector pertaining to X. Conversely, one may restore the original df F from the copula by applying the quantile transformation. We ﬁnd

(10.21) F (x) = C F1 (x1 ), . . . , Fd (xd ) , which is the desired decomposition of F into the copula C and the univariate margins Fj . Likewise, the original univariate margins can be replaced by some other dfs. Thus, we may design a multivariate df with a given multivariate dependence structure (as, e.g., a copula) and predetermined univariate margins. For a shorter introduction to various families of copula functions we refer to a paper by Joe4 . There is a controversial discussion about the usefulness of copulas: we refer to Mikosch5 and the attached discussion, as, e.g., the contribution by Genest and R´emillard6 . 4 Joe,

H. (1993). Parametric families of multivariate distributions with given marginals. J. Mult. Analysis 46, 262–282. 5 Mikosch, 6 Genest,

T. (2006). Copulas: tales and facts. Extremes 9, 3–20.

C. and R´emillard, B. (2006). Discussion of “Copulas: tales and facts”, by Thomas Mikosch. Extremes 9, 27–36.

276

10. Basic Multivariate Concepts and Visualization

Data–Based Transformations, Empirical Copulas In application one may carry out the transformations with estimated parametric univariate and multivariate dfs and and piece the univariate and multivariate components together, for details see page 389. In the following example, the copula method is employed with estimated Gaussian copula and Student margins. Example 10.3.1. (Log-Returns Deutsche Bank against Commerzbank: Continuation of Example 9.4.1.) The scatterplot in Figure 10.7 again consists of the log-returns (with conversed signs) of the Deutsche Bank plotted against those of the Commerzbank on trading days from Jan. 1, 1992 to Jan. 11, 2002. In addition, the contour lines of the estimated density of a Gaussian copula and univariate Student margins are plotted.

Deutsche Bank

0.1

Fig. 10.7. Scatterplot of logreturns (with changed signs) Deutsche Bank against Commerzbank and contour plot of estimated density with Gaussian copula and univariate Student margins.

0.0

-0.1

-0.1

0.0

0.1

Commerzbank The exotic “butterﬂy” contour plot does not ﬁt to the scatterplot which has an elliptical shape. We conclude that the modeling by means of a Gaussian copula and univariate Student margins is not correct.

A related illustration in conjunction with a scatterplot of daily diﬀerences of zero–bond–discount–factors may be found in Wiedemann et al., page 757 . These examples show that the copula method should be employed with utmost care. We are not aware whether there are general rules under which the copula method is always appropriate. 7 Wiedemann,

A., Drosdzol, A., Reiss, R.–D. and Thomas, M. (2005). Statistische Modellierung des Zins¨ anderungsrisikos. Teil 2: Multivariate Verteilungen. In: Modernes Risikomanagement (F. Romeike ed.). Wiley-VCH, Weinheim.

10.3. Decompositions of Multivariate Distributions

277

The transformations may also be based on kernel estimates of the dfs, see (2.17) and (10.19). In this case, the data are still transformed by means of continuous dfs. In Section 13.3 we make use of univariate transformations of a diﬀerent type, namely those by means of univariate sample dfs Fn based on the sample vector x = (x1 , . . . , xn ), see (2.1). Thus, the original data xi in the margins are replaced by yi = Fn (xi ). Recall that the number of xj ≤ xi is the rank of xi , denoted by ˇ page 368 . The value ri (x) is the rank of xi in ri (x), see, e.g., H´ajek and Sidak, the ordered sample x1:n < . . . < xn:n . Therefore, the transformed data are relative ranks; we have (10.22) yi = ri (x)/n. In that context one loosely speaks of empirical copulas. Concerning stochastical properties of order statistics and rank statistics we refer to the book by H´ajek and ˇ Sidak.

Other Decompositions The decomposition of the joint distribution of random variables X and Y in the marginal distribution of X and the conditional distribution of Y given X = x was the topic of Section 8.1. Of course, this is the most important decomposition methodology for a random vector. Notable is also the well–known decomposition of spherical random vectors in two independent random variables, namely the radial and angular components, see Section 11.2. In conjunction with extreme values, we are interested in standard forms of multivariate distributions diﬀerent from copulas, namely, • the bivariate generalized Pareto (GP) dfs in their standard form, cf. Section 13.1, are closely related to copulas in so far that the margins are always equal to the uniform df on the interval (−1, 0) which is the univariate GP df W2,−1 , thus, there is the slight modiﬁcation of a shifted uniform df; • the bivariate extreme value (EV) dfs in Section 12.1 are described by the Pickands dependence function and univariate margins equal to the reversed exponential df on the negative half–line which is the EV df G2,−1 (by the way, other authors prefer the Frech´et df G1,1 as univariate margin); • representations of a diﬀerent type are employed in Section 12.4 where a bivariate dfs H on the left, lower quadrant (−∞, 0]2 is represented by a certain spectral decomposition. For that purpose one considers univariate dfs of the form Hz (c) = H(cz, c(1 − z)) 8 H´ ajek,

ˇ J. and Sidak, Z. (1967). Theory of Rank Tests. Academic Press, New York.

278

10. Basic Multivariate Concepts and Visualization in the variable c for each z, where z and c may be regarded as the angular and, respectively, radial component. If H is an EV df or, respectively, a GP df, then Hz is a reversed exponential df or, respectively, a uniform df depending on z,

• in analogy to the above mentioned decomposition for spherical random vectors, bivariate GP random vectors can be decomposed in independent radial and angular components, see Section 12.4.

Chapter 11

Elliptical and Related Distributions In Section 11.1 we ﬁrst recall some well–known, basic facts about multivariate Gaussian and log–normal models. The Gaussian distributions will serve as examples of spherical and elliptical distributions in Section 11.2. An introduction to multivariate Student and multivariate sum–stable distributions is separately treated in the Sections 11.3 and 11.4. Thus, we deal with multivariate distributions, where the univariate margins have light, fat and heavy tails. Recall that Student distributions have Pareto– type tails with α > 0, whereas the tail index of the non–Gaussian, sum–stable distributions is restricted to α < 2.

11.1

Multivariate Gaussian Models

Corresponding to the univariate case, parametric models are built by starting with certain standard dfs and, subsequently, adding location and scale parameters in the single components. As examples we ﬁrst discuss the multivariate normal and log–normal models. In Section 12.1, the multivariate normal model will be converted into a multivariate EV model with univariate Gumbel margins.

Location and Scale Parameter Vectors Let X = (X1 , . . . , Xd ) be a random vector with df F . Location and scale parameter vectors can be added to this df by considering random variables Yj = µj + σj Xj for j = 1, . . . , d. The joint df of the Yj is given by Fµ,σ (x) = =

P {X1 ≤ (x1 − µ1 )/σ1 , . . . , Xd ≤ (xd − µd )/σd } x−µ , F σ

(11.1)

280

11. Elliptical and Related Distributions

where µ = (µ1 , . . . , µd ) and σ = (σ1 , . . . , σd ) denote the location and scale vectors.

Multivariate Normal Distributions The d–variate normal distribution serves as a ﬁrst example of a multivariate distribution. Let X = (X1 , . . . , Xd ) be a vector of iid standard normal random variables. Linear changes of X are again normal vectors. If A is a d × d–matrix (ai,j ) with determinant det A = 0, then

Y = AX =

a1,j Xj , . . . ,

j≤d

ad,j Xj

(11.2)

j≤d

is a d–variate normal vector with mean vector zero and covariance matrix Σ = (σi,j ) = AA . The density of Y is given by ϕΣ (y) =

1 1 −1 yΣ exp − y , 2 (2π)d/2 det(Σ)1/2

where Σ−1 denotes the inverse of Σ. Let x ΦΣ (x) = ϕΣ (y) dy

(11.3)

(11.4)

−∞

be the df of Y . We write ϕµ,Σ and Φµ,Σ when a location vector µ is added. The density ϕΣ can be deduced from the density ϕI of the original normal vector X by applying the transformation theorem for densities (hereby, I denotes the unit matrix with the elements equal to one in the main diagonal and the elements are equal to zero otherwise). Moreover, marginal vectors (Yj1 , . . . , Yjk ) with 1 ≤ j1 < j2 < · · · < jk ≤ d are normal again. Notice that (11.2) is a special case of the following well–known result: if Y is a d–variate normal vector with mean vector µ and covariance matrix Σ and A is a k × d–matrix (with k rows and d columns and k ≤ d) having rank k, then Z = AY is a k–variate normal vector with mean vector Aµ and covariance matrix AΣA .

Statistical Inference in the Multivariate Gaussian Model The d–variate normal model is

Φµ,Σ : µ = (µ1 , . . . , µd ), Σ = σi,j ,

(11.5)

where µ is a location (mean) vector and Σ is the covariance matrix. Estimators are easily obtained by the sample mean vector µn and the sample covariance matrix Σn , cf. (10.15) and (10.16).

11.2. Spherical and Elliptical Distributions

281

It is well known that the sample mean vector µn and the sample covariance matrix Σn (with the factor 1/(n − 1) replaced by 1/n) are also the MLEs in the d–variate normal model. Assume that (Y1 , . . . , Yd ) is a random normal vector with mean vector µ = (µ1 , . . . , µd ) and covariance matrix Σ = (σi,j ). Then Yj has the location and scale 1/2 parameters µj and σj = σj,j . The correlation matrix is (ρi,j ) = (σi,j /(σi σj )). Therefore, a normal distribution may be alternatively represented by the the correlation matrix (ρi,j ) and the location and scale vectors µ = (µ1 , . . . , µd ) and σ = (σ1 , . . . , σd ).

A Useful Result Concerning the Asymptotic Normality The following result, which was applied in (4.4), is taken from [48], pages 118 and 122. Let • b−1 n (X n − µ) be distributed asymptotically according to ΦΣ (that is the pointwise convergence of the dfs) where bn → 0 as n → ∞, • gi be real–valued functions with partial derivatives ∂gi /∂xj = 0 at µ for i = 1, . . . , m and j = 1, . . . , d. Let g = (g1 , . . . , gm ) and let D be the matrix of partial derivatives evaluated at µ. Then, (11.6) b−1 n (g(X n ) − g(µ)) is distributed asymptotically according to ΦDΣD .

Multivariate Log–Normal Distributions If the positive data x1 , . . . , xn indicate a heavier upper tail than that of a multivariate normal distribution Φµ,Σ , then one may try to ﬁt a multivariate log–normal df F(µ,Σ) (x) = Φµ,Σ (log(x1 ), . . . , log(xd )), x > 0. (11.7) The values exp(µi ) are scale parameters and Σ is a matrix of shape parameters of the multivariate log–normal distribution. It is apparent that the univariate margins are univariate log–normal distributions as set forth in Section 1.6.

11.2

Spherical and Elliptical Distributions

First, we study multivariate normal distributions from the viewpoint of spherical and elliptical distributions.

282

11. Elliptical and Related Distributions

Multivariate Normal Distributions, Revisited We describe multivariate normal distributions as spherical and elliptical ones. Let again X = (X1 , . . . , Xd ) be a vector of iid standard normal random variables as in Section 11.3. The pertaining density is 1 1 , (11.8) xx exp − ϕ(xj ) = ϕI (x) = 2 (2π)d/2 j≤d

where I is again the unit √ matrix. Notice that |x| = xx is the Euclidean norm of the vector x. It is apparent that the contour lines {x : ϕI (x) = q} are spheres. Therefore, one speaks of a spherical distribution. A random vector X with density ϕI has the following property: we have d AX = X, (11.9) for any orthogonal matrix A; that is, for matrices A with AA = I. This can be analytically veriﬁed by means of equation (11.3) because Σ−1 = (AA )−1 = I for orthogonal matrices A. (11.9) is also evident from the fact that an orthogonal matrix causes the rotation of a distribution. More generally, if A is a d × d–matrix with det A = 0, then AX is a normal vector with covariance matrix Σ = AA and density ϕΣ , cf. again (11.3). Now, the contour line {y : ϕΣ (y) = q} is an ellipse for every q > 0, and one speaks of an elliptical distribution.

Spherical and Elliptical Distributions Generally, one speaks of a spherical random vector X if (11.9) is satisﬁed for any orthogonal matrix A. Moreover, an elliptical random vector is the linear change of a spherical random vector under a matrix A with det A = 0. In conjunction with multivariate Student and multivariate sum–stable distributions we will make use of the following construction: if X is a spherical random vector and Y is real–valued then XY is again a spherical random vector because d

A(XY ) = (AX)Y = XY,

(11.10)

for any orthogonal matrix A.

A Decomposition of Spherical Distributions It is well known, see, e.g., [19], that a spherical random vector X can be written as X = RU, where R ≥ 0 is the radial component, U is uniformly distributed on the unit √ sphere S = {u : |u| = 1} and R, U are independent. Here |x| = xx is again the

11.3. Multivariate Student Distributions

283

Euclidean norm. We may call U the angular component (at least in the bivariate case). d

d

If P {X = 0} = 0, then we have |X| = R and X/|X| = U.

11.3

Multivariate Student Distributions

We introduce another class of elliptical distributions, namely certain multivariate Student distributions, and deal with statistical questions. At the end of this section, we also introduce non–elliptical Student distributions.

Multivariate Student Distribution with Common Denominators Recall from Section 6.3 that Z = X/(2Y /α)1/2 is a standard Student random variable with shape parameter α > 0, where X is standard normal and Y is a gamma random variable with parameter r = α/2. Next, X will be replaced by a random vector X = (X1 , . . . , Xd ) of iid standard normal random variables Xi . Because X is spherical, we know from the preceding arguments that X/(2Y /α)1/2 is a spherical random vector. In addition, if A is a matrix with det A = 0, then a linear change yields the elliptical random vector

(11.11) Z = A X/(2Y /α)1/2 = (AX)/(2Y /α)1/2 , where AX is a normal random vector with covariance matrix Σ = AA . This distribution of Z is the multivariate standard Student distribution with parameter α > 0 and parameter matrix Σ = (σi,j ). We list some properties of these distributions. • The density of Z = (Z1 , . . . , Zd ) is fα,Σ (z) =

−(α+d)/2 Γ((α + d)/2) . 1 + α−1 zΣ−1 z d/2 1/2 Γ(α/2)(απ) (det Σ)

(11.12)

• According to (11.11), the marginal distributions are Student distributions again. In particular, Zj is distributed according to the Student distribution 1/2 with shape parameter α > 0 and scale parameter σj = σj,j . • If α > 2, then not exist.

α α−2 Σ

is the covariance matrix. For α ≤ 2 the covariances do

Warning! Σ is not the covariance matrix of the Student distribution with density fα,Σ for any α. This was the reason why we spoke of a parameter matrix Σ instead of a covariance matrix in that context. In the sequel, we still address Σ as “covariance matrix”—in quotation marks—for the sake of simplicity.

284

11. Elliptical and Related Distributions

Initial Estimation in the Student Model The shape and scale parameters α and σj may be estimated within the univariate marginal models. Take, e.g., the arithmetic mean of the estimates of α in the marginal models as an estimate of α in the joint model. If α is known to be larger than 2, then one may utilize sample variances to estimate the “covariance matrix”. Otherwise, one may use an estimate based on Kendall’s τ , see (10.3), We will estimate the “covariance matrix” Σ = (σi,j ) by estimating the “correlation 1/2 matrix” (σi,j /σi σj ), where σj = σj,j again. The operational meaning of this parameterization becomes evident by generating the Student random vector Z in (11.11) in two steps. Let D be the diagonal matrix with elements σj in the main ˜ where Z ˜ = (D−1 AX)/(2Y /α)1/2 is the standarddiagonal: we have Z = DZ ized Student random vector with “covariance matrix” (σi,j /σi σj ), and Z is the pertaining random vector with scale parameter vector σ.

Maximum Likelihood Estimation in the Student Model Based on initial estimates one may compute an MLE for the Student model using the Newton–Raphson procedure. We continue Example 10.3.1 where the application of the copula method produced a curious “butterﬂy” contour plot. Example 11.3.1. (Continuation of Example 10.3.1.) The following considerations are based on the daily stock indizes of the Commerzbank and the Deutsche Bank from Jan. 1, 1992 to Jan 11, 2002. The scatterplot in Figure 11.1 consists of the the pertaining log-returns on trading days with conversed signs.

Deutsche Bank

0.1

0.0

Fig. 11.1. Scatterplot of logreturns (with changed signs) Deutsche Bank against Commerzbank and contour plot of the estimated Student density.

-0.1

-0.1

0.0

0.1

Commerzbank The estimated bivarate Student distribution provides a better ﬁt to the scatterplot due to its elliptical contour.

11.4. Multivariate Sum–Stable Distributions

285

For a continuation we refer to page 390 where the Value–at–Risk is computed within the multivariate Student model.

Extending the Concept of Multivariate Student Distributions In (6.16) we introduced Student distributions as those of X/(Y /r)1/2 , where X is standard normal and Y is a gamma random variable with parameter r > 0. This approach can be extended to the d–variate case dealing with random variables Xi /(Yi /ri )1/2 ,

i = 1, . . . , d,

where X = (X1 , . . . , Xd ) is multivariate normal with mean vector zero and correlation matrix Σ, and Y = (Y1 , . . . , Yd ) is a multivariate gamma vector. For example, the Yi are totally dependent or independent (for details, see [32], Chapter 37). It is apparent that the univariate margins are Student random variables with parameter ri . A further extension to skewed distributions is achieved when the mean vector of X is unequal to zero. Then, the univariate margins are noncentral Student distributions.

11.4

Multivariate Sum–Stable Distributions co–authored by J.P. Nolan1

In this section we give a short introduction to multivariate sum–stable distributions. We emphasis the statistical diagnostic which reduces the multivariate case to the univariate one which was outlined in Section 6.4.

Distributional Properties A random vector X = (X1 , X2 , . . . , Xd ) is stable if for all m = 2, 3, 4, . . . X1 + · · · + Xm = am X + bm , in distribution, where X1 , X2 , . . . are iid copies of X. The phrase “jointly stable” is sometimes used to stress the fact that the deﬁnition forces all the components Xj to be univariate sum–stable with the same α. Formally, if X is a stable random vector, then every one dimensional projection uX = ui Xi is a one dimensional stable random variable with the same index α for every u, e.g.,

uX ∼ S(α, β(u), γ(u), δ(u); 1).

(11.13)

The converse of this statement is true if the projections are all symmetric, or all strictly stable, or if α ≥ 1. Section 2.2 of [46] gives an example where α < 1 1 American

University, Washington DC.

286

11. Elliptical and Related Distributions

and all one dimensional projections are stable, but X is not jointly stable. In this case, a technical condition must be added to get a converse. One advantage of (11.13) is that it gives a way of parameterizing multivariate stable distributions in terms of one dimensional projections. From (11.13) one gets the (univariate) characteristic function of uX for every u, and hence the joint characteristic function of X. Therefore α and the functions β(·), γ(·) and δ(·) completely characterize the joint distribution. In fact, knowing these functions on the unit sphere S = {u : |u| = 1} in the Euclidean d–space characterizes the distribution. The functions β(·), γ(·) and δ(·) must satisfy certain regularity conditions. The standard way of describing multivariate stable distributions is in terms of a ﬁnite measure Λ on the sphere S, called the spectral measure. It is typical to use the spectral measure to describe the joint characteristic function, we ﬁnd it more convenient to relate it to the functions β(·), γ(·), and δ(·). Let X = (X1 , . . . , Xd ) be jointly stable with a representation as in (11.13). Then there exists a ﬁnite measure Λ on S and a d–variate vector δ with γ(u)

=

β(u)

δ(u)

S

1/α |us |α Λ(ds)

|us |α sign (us ) Λ(ds) S = |us |α Λ(ds) S ⎧ ⎨ δu if = ⎩ δu − π2 S (us ) ln |us | Λ(ds)

α = 1; (11.14) α = 1.

It is possible for X to be non–degenerate, but singular. X = (X1 , 0) is formally a two dimensional stable distribution if X1 is univariate stable, but it does not have a density. It can be shown that the following conditions are equivalent: (i) X is nonsingular, (ii) γ(u) > 0 for all u, (iii) the span of the support of Λ is the Euclidean d–space. If these conditions hold, then a smooth density exists. Relatively little is known about these densities—their support is a cone in general, and they are likely to be unimodal. There are a few special cases of multivariate stable distributions where quantities of interest can be explicitly calculated. We concentrate on the bivariate case.

The Gaussian Case The density function ϕµ,Σ of a multivariate Gaussian distribution was given in (11.3). The joint characteristic function of such a distribution is

χ(u) = exp − uΣu /2 + uµ . Hence the parameter functions are γ(u) = (uΣu /2)1/2 , β(u) = 0 and δ(u) = uµ .

11.4. Multivariate Sum–Stable Distributions

287

The Independent Case Let X1 ∼ S(α, β1 , γ1 , δ1 ; 1) and X2 ∼ S(α, β2 , γ2 , δ2 ; 1) be independent, then X = (X1 , X2 ) is bivariate stable. Since the components are independent, the joint density is f (x1 , x2 ) = g(x1 |α, β1 , γ1 , δ1 ; 1)g(x2 |α, β2 , γ2 , δ2 ; 1), where g(·| · · · ) are the one dimensional stable densities. When there is an explicit form for a univariate density (Gaussian, Cauchy or L´evy cases), then there is an explicit form for the bivariate density. For example, the standardized Cauchy with independent components has density f (x1 , x2 ) =

1 1 . π 2 (1 + x21 )(1 + x22 )

(11.15)

For a general α the parameter functions are β(u1 , u2 ) = γ(u1 , u2 ) = δ(u1 , u2 ) =

(sign u1 )β1 |u1 γ1 |α + (sign u2 )β2 |u2 γ2 |α |u1 γ1 |α + |u2 γ2 |α (|u1 γ1 |α + |u2 γ2 |α )1/α α = 1, u 1 δ1 + u 2 δ2 , u1 δ1 + u2 δ2 − (2/π)(β1 γ1 u1 ln |u1 | + β2 γ2 u2 ln |u2 |), α = 1.

Note that β(1, 0) = β1 , γ(1, 0) = γ1 , and δ(1, 0) = δ1 , which corresponds to (1, 0)X = X1 and β(0, 1) = β2 , γ(0, 1) = γ2 , and δ(0, 1) = δ2 which corresponds to (0, 1)X = X2 . The corresponding spectral measure is discrete with four point masses γ1α (1 + β1 )/2 at (1, 0), γ1α (1 − β1 )/2 at (−1, 0), γ2α (1 + β2 )/2 at (0, 1), γ2α (1 − β2 )/2 at (0, −1).

Radially Symmetric Stable Distributions Next we deal with radially symmetric (spherical) distributions. When α = 2, they are Gaussian distributions with independent components. When 0 < α < 2, the components are univariate symmetric stable, but dependent. The Cauchy example has an explicit formula for the density, namely, f (x1 , x2 ) =

1 1 . 2π (1 + x21 + x22 )3/2

(11.16)

See Fig. 11.2 for an illustration. That is not the same as the independent components case (11.15). When α ∈ {1, 2}, there is not a closed form expression for the density. The parameter functions are easy: β(u1 , u2 ) = 0, γ(u1 , u2 ) = c, and δ(u1 , u2 ) = 0. The spectral measure for a radially symmetric measure is a uniform measure (a multiple of Lebesgue measure) on the unit circle. A linear change of variables gives elliptically contoured stable distributions, which have heavier tails than their Gaussian counterparts.

288

11. Elliptical and Related Distributions

2

0.15 0.1 z 0.05

2

-2

-2

2

-1

1

0

0 1

x

-1 2

-2

y

-2

Fig. 11.2. Contour plot (left) and surface plot (right) for a radially symmetric Cauchy density.

Another Illustration If the spectral measure has more mass in a certain arc, then the bivariate distribution bulges in that direction. This is illustrated in Fig. 11.3 for a bivariate sum–stable distribution with α = 0.8, where the spectral measure has point masses of weight 0.125 at (1, 0), and weights 0.250 at (cos(π/3), sin(π/3)) and (cos(−π/3), sin(−π/3)).

1.8

1.5 1 z 0.5

1.8

0

0

1 1

0

x -1.8

-1

y

-2

Fig. 11.3. Sum–stable density bulging in direction π/3 and −π/3 having also a smaller bulge along the x–axis corresponding to diﬀerent masses.

11.4. Multivariate Sum–Stable Distributions

289

Multivariate Estimation For conciseness, we stated the above results in the conventional S(α, β, γ, δ; 1) parameterization. As in the univariate case, one should use the S(α, β, γ, δ; 0) parameterization in all numerical and statistical work to avoid the discontinuity at α = 1. There are several methods of estimating for multivariate stable distributions; in practice all involve some estimate of α and some discrete estimate of the spectral 2 3 ˆ = measure Λ k≤m λk 1{sk } , sk ∈ S. Rachev and Xin and Cheng and Rachev use the fact that the directional tail behavior of multivariate stable distributions is Pareto, and base an estimate of Λ on this. Nolan, Panorska and McCulloch4 deﬁne two other estimates of Λ, one based on the joint sample characteristic function and one based on one–dimensional projections of the data. Another advantage of (11.14) is that it gives a way of assessing whether a multivariate data set is stable by looking at just one dimensional projections of the data. Fit projections in multiple directions using the univariate techniques described earlier, and see if they are well described by a univariate stable ﬁt. If so, and if the α’s are the same for every direction (if α < 1, another technical condition holds), then a multivariate stable model is appropriate. The parameters (α, β(u), γ(u), δ(u)) may be more useful than Λ itself when two multivariate stable distributions are compared. This is because the distribution of X depends more on how Λ distributes mass around the sphere than exactly on the measure. Two spectral measures can be far away in the traditional total variation norm (e.g., one can be discrete and the other continuous), but their corresponding directional parameter functions and densities can be very close. Indeed, (11.13) shows that the only way Λ enters into the joint distribution is through the parameter functions.

Multivariate Diagnostics The diagnostics suggested are: • Project the data in a variety of directions u and use the univariate diagnostics described in Section 6.4 on each of those distributions. Bad ﬁts in any direction indicate that the data is not stable. • For each direction u ∈ S, estimate a value for the parameter functions α(u), β(u), γ(u), δ(u) by ML estimation. The plot of α(u) should be a constant, 2 Rachev, S.T. and Xin, H. (1993). Test for association of random variables in the attraction of multivariate stable law. Probab. Math. Statist. 14, 125–141. 3 Cheng, B.N. and Rachev, S.T. (1995). Multivariate stable future prices. Math. Finance 5, 133–153. 4 Nolan,

J.P., Panorska, A. and McCulloch, J.H. (2001). Estimation of stable spectral measures. Mathematical and Computer Modelling 34, 1113–1122.

290

11. Elliptical and Related Distributions signiﬁcant departures from this indicate that the data has diﬀerent decay rates in diﬀerent directions and is not jointly stable. (Note that γ(·) will be a constant iﬀ the distribution is isotropic.)

ˆ by one of the methods • Assess the goodness–of–ﬁt by computing a discrete Λ ˆ above. Substitute the discrete Λ in (11.14) to compute parameter functions. If it diﬀers from the one obtained above by projection, then either the data is not jointly stable, or not enough points were chosen in the discrete spectral measure approximation.

Chapter 12

Multivariate Maxima Multivariate extreme value (EV) distributions are introduced as limiting distributions of componentwise taken maxima. In contrast to the univariate case, the resulting statistical model is a nonparametric one. Some basic properties and ﬁrst examples of multivariate EV dfs are dealt with in Section 12.1. In Section 12.2, we introduce the family of Gumbel–McFadden distributions which are perhaps the most important multivariate EV distributions. As an application, the question of economic choice behavior will be considered under disturbances which are multivariate EV distributed. In the special case of Gumbel– McFadden disturbances the choice probabilities are of a multinomial logit form. Estimation in certain parametric EV submodels and will be investigated in Section 12.3. In Section 12.4, we give an outline of a new spectral decomposition methodology in extreme value theory where bivariate dfs are decomposed in univariate dfs. For example, bivariate EV dfs are decomposed in univariate EV dfs.

12.1

Nonparametric and Parametric Extreme Value Models

Because the univariate margins of multivariate EV distributions are EV distributions, one may concentrate on the dependence structure of the multivariate distribution. Therefore, we particularly, study EV dfs with reversed exponential margins. In that context, the Pickands dependence function will be central for our considerations.

Multivariate Extreme Value Distributions, Max–Stability The maximum of vectors xi = (xi,1 , . . . , xi,d ) will

be taken componentwise. We have maxi≤m xi = maxi≤m xi,1 , . . . , maxi≤m xi,d . If X1 , . . . , Xm are iid random

292

12. Multivariate Maxima

vectors with common d–variate df F , then P max Xi ≤ x = F m (x),

(12.1)

i≤m

because maxi≤m Xi ≤ x holds if, and only if, X1 ≤ x, . . . , Xm ≤ x. Corresponding to the univariate case, the actual df F m will be replaced by a limiting df. If m → ∞, (12.2) F m (bm + am x) → G(x), for vectors bm and am > 0, then G is called a d–variate EV df and F is said to belong to the max–domain of attraction of G. One can prove that G is an EV df if, and only if, G is max–stable, that is, Gm (bm + am x) = G(x)

(12.3)

for certain vectors bm and am > 0. Let F(j) denote the jth margin of F . From (12.2), it follows that m (bm,j + am,j xj ) → G(j) (xj ), F(j)

m → ∞,

(12.4)

where G(j) is the jth margin of G. Hence, the jth marginal df G(j) of a multivariate EV df is necessarily a univariate EV df. In addition, the vectors bm = (bm,1 , . . . , bm,d ) and am = (am,1 , . . . , am,d ) are determined by the univariate convergence. Another consequence is the continuity of the multivariate EV dfs. Yet, in contrast to the univariate EV model, the d–variate one is a nonparametric model for d ≥ 2.

Extreme Value Model for Independent Margins If, in addition, the vectors Xi have independent margins, then the marginal maxima maxi≤m Xi,1 , . . . , maxi≤m Xi,d are independent and, consequently, m F(j) (bm,j + am,j xj ) → G(j) (xj ) (12.5) F m (bm + am x) = j≤d

j≤d

as m → ∞ if (12.4) holds. For this special case, the limiting df G of maxi≤m Xi in (12.2), taken in the γ–parameterization, is Gγj ,µj ,σj (xj ). (12.6) G(x) = j≤d

It is evident that the estimation of the parameters γj , µj and σj must be based on the data in the jth component. The importance of the EV dfs as given in (12.6) comes from the fact that an EV df of this form may also occur if the random vectors Xi have dependent margins. We mention a prominent example.

12.1. Nonparametric and Parametric Extreme Value Models

293

(Tiago de Oliveira, Geﬀroy, Sibuya.) Let (Xi , Yi ) be iid normal vectors with correlation coeﬃcient ρ strictly between −1 and 1. Under this condition, the maxima maxi≤m Xi and maxi≤m Yi are asymptotically independent. We have P max Xi ≤ bm +am x, max Yi ≤ dm +cm y → G0 (x)G0 (y), m → ∞, (12.7) i≤m

i≤m

with standardizing constants such that the univariate convergence holds. To prove this result, one may verify a simple condition imposed on conditional probabilities which were already studied in Section 2.6. Let X and Y be random variables with common df F such that F m (bm + am x) → G(x) as m → ∞ for all x. The condition P (Y > u|X > u) → 0, u ↑ ω(F ), (12.8) is equivalent to the asymptotic independence of the pertaining maxima; that is, P {max Xi ≤ bm + am x, max Yi ≤ bm + am y} → G(x)G(y), i≤m

i≤m

m → ∞,

for iid copies (Xi , Yi ) of (X, Y ), see Sibuya (1960) in the paper cited on page 74. For a proof of this result we refer to [20], page 258, or [42], page 235. The asymptotic independence of the marginal maxima may be regarded as the intrinsic property of tail independence. It is equivalent to χ = lim P (Y > u|X > u) = 0 u↑ω(F )

where χ is the tail dependence parameter introduced in Section 2.6. Condition (12.8) also implies that the componentwise taken exceedances are independent if the thresholds are chosen in such a manner that the expected number of exceedances remains bounded when the sample size goes to inﬁnity1 . Thus, before using a complex model, one should check whether the EV model for independent margins or a related generalized Pareto model is applicable. In addition, the pairwise asymptotic independence implies the joint asymptotic independence, see, e.g., [20] or [42].

Rates for the Asymptotic Independence of Maxima Let F be a bivariate df with identical univariate margins F(j) . Applying the representation (10.7) of a df by means of survivor functions one gets (see (7.2.11) in [42]) that

(12.9) F n (x) = F1n (x1 )F2n (x2 ) exp nF (x) + O(n−1 ). 1 Reiss,

R.–D. (1990). Asymptotic independence of marginal point processes of exceedances. Statist. & Decisions 8, 153–165. See also [43], Section 6.2.

294

12. Multivariate Maxima

Therefore, the term nF (x) determines the rate at which the independence of the marginal maxima is attained. For a general result of this type we refer to [16], Lemma 4.1.3. In the case of iid standard normal vectors with correlation coeﬃcient ρ with −1 < ρ < 1 it was proven in [42] that

−(1−ρ)/(1+ρ) (12.10) (log n)−ρ/(1+ρ) , nF (bn + b−1 n x) = O n where bn = (bn , bn ) and bn satisﬁes the condition bn = ϕ(bn ). Thus, one obtains again the above mentioned result of the asymptotic independence of maxima of normal random variables. The rate of the asymptotic independence is slow when ρ is close to 1. For a continuation of this topic we refer to Section 13.3.

The Marshall–Olkin Model The standard Marshall–Olkin distributions Mλ are bivariate EV distributions with exponential margins G2,−1 = exp(x), x < 0, where the dependence parameter λ ranges from 0 to 1. For λ = 0 we have independence, and for λ = 1 total dependence. We have x, y < 0. (12.11) Mλ (x, y) = exp (1 − λ)(x + y) + λ min{x, y} , The df Fλ is necessarily continuous, yet a density does not exist for λ > 0, because standard Marshall–Olkin distributions have positive mass at the main diagonal which becomes visible in Fig. 12.1.

Fig. 12.1. 3–D plot of Marshall– Olkin df Mλ with λ = 0.5 .

For 0 ≤ λ ≤ 1, check that Mλ (x, y) = P

max

Z2 Z1 , 1−λ λ

! ≤ x, max

Z3 Z1 , 1−λ λ

!

! ≤y ,

(12.12)

12.1. Nonparametric and Parametric Extreme Value Models

295

where Z1 , Z2 and Z3 are iid random variables with common exponential df G2,−1 . This model can be extended to a d–variate one. Let Λ = (λi,j ) be a m × d– matrix such that λi,j ≥ 0 and

λi,j = 1 i≤m

for each j ≤ d. Let Z1 , . . . , Zm be iid random variables with common exponential df G2,−1 (x) = exp(x), x < 0. Then, MΛ (x) = P max{Zi /λi,j } ≤ xj , j = 1, . . . , d i≤m

= exp min(λi,j xj ) , x < 0, (12.13) i≤m

j≤d

is a d–variate max–stable df with univariate margins G2,−1 . In (12.12) there is a special case for d = 2 with λ1,3 = λ2,2 = 0. Such dfs are also of theoretical interest (see [16], page 111) for a general representation of max–stable distributions.

H¨ usler–Reiss Triangular Arrays This model is constructed by taking limiting dfs of maxima of a triangular array of standard normal random vectors. The univariate margins are Gumbel dfs. We start with the bivariate case. Let Φ again denote the univariate standard normal df. For positive parameters λ we have ∞ 1 λ(x − z) −z + (12.14) e dz Hλ (x, y) = exp − e−x − Φ λ 2 y 1 λ(y − x) −x 1 λ(x − y) −y + + , e −Φ e = exp − Φ λ 2 λ 2 where the second equality may be established by partial integration. In addition, let H0 (x, y) = G0 (x)G0 (y) and H∞ (x, y) = G0 (min{x, y}) which are the dfs describing the cases of independence and total dependence. We have Hλ (x, y) → H0 (x, y)

and

Hλ (x, y) → H∞ (x, y),

λ → ∞,

and, therefore, this model ranges continuously between independence and total dependence with λ indicating the degree of dependence.

296

12. Multivariate Maxima

The bivariate EV dfs Hλ in (12.14) generally occur as limiting dfs of maxima of iid random vectors (Xn,i , Yn,i ), i = 1, . . . , n, where '

d (12.15) (Xn,i , Yn,i ) = S1 , ρn S1 + 1 − ρ2n S2 with ρn ↑ 1 at a certain rate as n → ∞ and (S' 1 , S2 ) being a spherical random vector, under the condition that the radius R = S12 + S22 is in the max–domain of attraction of the Gumbel df G0 2 . Notice that the (Xn,i , Yn,i ) are elliptically distributed, see Section 11.2. Further related results may be found in another article by Hashorva3 . 3–D plots of the density of Hλ with parameter λ = 1 are displayed in Fig. 12.2 with views from two diﬀerent angles. On the left–hand side, one recognizes that hλ is symmetric in x and y, cf. also (12.14). After a rotation of 90◦ , the typical contours of the marginal Gumbel densities become visible.

Fig. 12.2. (left.) 3–D plot with a view of the density hλ along the main diagonal in the (x, y) plane for λ = 1. (right.) The density shown again after a rotation of 90◦ about the z–axis.

We compute the density hλ (x, y) and the conditional df Hλ (y|x) for parameters 0 < λ < ∞. The density can be computed by taking partial derivatives of Hλ , cf. (10.11). By employing the identity

ϕ λ−1 + λ(x − y)/2 e−y = ϕ λ−1 + λ(y − x)/2 e−x , one gets hλ (x, y) =

Hλ (x, y) Φ λ−1 + λ(x − y)/2 Φ λ−1 + λ(x − y)/2 e−(x+y)

+ λϕ λ−1 + λ(y − x)/2 e−x /2 . (12.16)

2 Hashorva, E. (2005). Elliptical triangular arrays in the max–domain of attraction of H¨ usler–Reiss distribution. Statist. Probab. Lett. 72, 125–135. 3 Hashorva,

E. (2006). On the max–domain of attraction of bivariate elliptical arrays. Extremes 8, 225–233.

12.1. Nonparametric and Parametric Extreme Value Models

297

The conditional density is hλ (y|x) = hλ (x, y)/g0 (x) , cf. (8.10). By integration, one obtains the conditional df Hλ (y|x) = Hλ (x, y)Φ (1/λ + λ(y − x)/2) /G0 (x) .

(12.17)

The conditional density and df are useful for generating data in two steps: ﬁrstly, generate x under the Gumbel df G0 and, secondly, generate y under the conditional df Hλ (· |x). There is a one–to–one relation between the dependence parameter λ and the correlation coeﬃcient ρ of Hλ which is indicated in Fig. 12.3. We see that the correlation coeﬃcient is practically zero when the shape parameter λ is smaller than .3.

1

Fig. 12.3. Correlation coeﬃcient ρ of Hλ plotted against the shape parameter λ. 2

4

Generally, let4 HΛ (x) = exp

−

k≤d

∞

xk

k−1 −z −1 ΦΣ(k) λi,k + λi,k (xi − z)/2 i=1 e dz ,

for a symmetric d × d–matrix Λ = λi,j with λi,j > 0 if i = j and λi,i = 0, and that ΦΣ(1) = 1). The ΦΣ(k) is a (k − 1)–variate normal df (with the convention

mean vector of ΦΣ(k) is zero and Σ(k) = σi,j (k) is a correlation matrix given by ⎧ −2

−2 −2 1 ≤ i < j ≤ k − 1; ⎨ λi,k λj,k λi,k + λj,k − λi,j /2 σi,j (k) = if ⎩ 1 i = j. 4 Such

a representation is given in Joe, H. (1994). Multivariate extreme–value distributions with applications to environmental data. Canad. J. Statist. 22, 47–64. Replacing ΦΣ(k) by survivor functions (cf. (10.4)), one obtains the original representation.

298

12. Multivariate Maxima

Each pair of marginal random variables determines one parameter of the limiting df so that the dimension of the parameter vector is d(d − 1)/2. For d = 2, the matrix Λ is determined by λ = λ1,2 and one gets the bivariate case.

Extending and Modifying Standard Models Let Z = (Z1 , . . . , Zd ) be a random vector distributed according to one of the preceding multivariate EV dfs G. Denote by G0 the common univariate df of the Zj . Thus, G0 is either an exponential or Gumbel df. • (Location and Scale Vectors.) A ﬁrst natural extension of the models is obtained by including location and scale parameters µj and σj . Thus, one = G ((x − µ)/σ) deals with random variables µj + σj Zj with joint df G(x) (cf. page 163). • (Exchanging Marginal Dfs.) Next the marginal df G0 is replaced by some other univariate EV df G(j) in the jth component. First remember that the Yj = G0 (Zj ) are (0, 1)–uniformly distributed with common df

−1 C(y) = G G−1 0 (y1 ), . . . , G0 (yd ) which is the copula of G, cf. page 275. Applying the quantile transformation one arrives at random variables Xj = G−1 (j) (Yj ) with marginal dfs G(j) and joint multivariate EV df

G(x) = C G(1) (x1 ), . . . , G(d) (xd )

−1 = G G−1 (12.18) 0 (G(1) (x1 )), . . . , G0 (G(d) (xd )) . Using the latter approach, one may build multivariate EV models with speciﬁed univariate dfs such as, e.g., a H¨ usler–Reiss model with Gumbel (EV 0) or EV margins. As an example, the bivariate, standard H¨ usler–Reiss df Hλ is transformed λ with exponential margins G(j) (x) = G2,−1 (x) = exp(x) for x < 0. to a df H

Because G0 (x) = exp − e−x is the standard Gumbel df, we have G−1 0 (G(j) (x)) = − log(−x) and, therefore, y x λ 1 1 λ + log + log y+Φ x (12.19) Hλ (x, y) = exp Φ λ 2 x λ 2 y ∞ (x, y) = exp(min{x, y}). 0 (x, y) = exp(x + y) and H for x, y < 0, with H

The Pickands Dependence Function for Distributions A bivariate EV df with exponential marginals G2,−1 (x) = exp(x), x < 0, has the representation (cf. [20], 2nd edition, or [16]))

G(x, y) = exp (x + y)D (x/(x + y)) , x, y ≤ 0, (12.20)

12.1. Nonparametric and Parametric Extreme Value Models

299

where D : [0, 1] → [0, 1] is the Pickands dependence function which is convex and satisﬁes max(1−z, z) ≤ D(z) ≤ 1 for 0 ≤ z ≤ 1 with the properties of independence and complete dependence being characterized by D = 1 and, respectively, D(z) = max(1 − z, z). We specify the explicit form of the Pickands dependence function for our standard examples. • Marshall–Olkin df Mλ : Dλ (z) = 1 − λ min(z, 1 − z) .

(12.21)

λ in the version (12.19): • H¨ usler–Reiss df H z 1−z 1 λ 1 λ + log + log z+Φ (1 − z). Dλ (z) = Φ λ 2 1−z λ 2 z (12.22) Recall that the Pickands dependence functions are convex and satisﬁes max(1 − z, z) ≤ D(z) ≤ 1

for 0 ≤ z ≤ 1.

The value D(1/2) of the Pickands dependence function will be used to deﬁne a certain canonical representation. Generally, a max–stable, d–variate df with univarite margins G−2,1 has the representation min(yj xj ) dµ(y) , x < 0, (12.23) G(x) = exp S j≤d

where µ is a ﬁnite measure on the d–variate unit simplex S = y : j≤d yj = 1, yj ≥ 1 such that S yj dµ(y) = 1 for j ≤ d.

The Canonical Parameterization For any bivariate EV df G with standard exponential margins G2,−1 , the Pickands dependence function DG satisﬁes 1/2 ≤ DG (1/2) ≤ 1. Particularly, DG (1/2) = 1 and DG (1/2) = 1/2, if independence and, respectively, complete dependence holds. Deﬁne the functional (canonical) parameter

T (G) = 2 1 − Dλ (1/2) (12.24) which ranges between 0 and 1. Necessarily, T (G) = 0 and T (G) = 1, if independence and, respectively, complete dependence holds. Suppose that there is a parametric family of bivariate EV dfs Gλ with a one– to–one relation between λ and Dλ (1/2). One may introduce another representation of the family by

(12.25) ϑ = T (Gλ ) = 2 1 − Dλ (1/2) .

300

12. Multivariate Maxima

This is the canonical parameterization of a bivariate EV family5 which will be studied more closely on the subsequent pages. In special cases, we obtain the following canonical parameters. • Marshall–Olkin: ϑ = λ; • H¨ usler–Reiss: ϑ = 2(1 − Φ(1/λ)). Notice that the original and the canonical parameterization are identical for the Marshall–Olkin family (also see Section 12.2 for the Gumbel–McFadden model).

Canonical and Tail Dependence Parameters Let again G be a bivariate EV df with Pickands dependence function D and canonical (functional) parameter T (G) = 2(1 − D(1/2)). An operational meaning of the canonical parameter can be expressed by means of a property of the survivor function G in the upper tail region. Applying (10.7) we get G(u, u) = =

1 − 2 exp(u) + exp(2uD(1/2)) T (G)|u| + O(u2 ),

u → 0.

(12.26)

Let X and Y be random variables with common EV df G. For the tail dependence parameter χ(q) at the level q, introduced in (2.60), one gets

χ(q) = P Y > log q X > log q =

G(log q, log q)/(1 − q)

=

T (G) + O(1 − q),

q → 1,

(12.27)

according to (12.26). Thus, the canonical parameter T (G) of a bivariate EV df is the tail dependence parameter χ, cf. (2.61). This topic will be continued in Section 13.3.

Multivariate Minima, Limiting Distributions of Minima and the Min–Stability Corresponding to the maximum of vectors x i = (xi,1 , . . . , xi,d ), one may take the componentwise minimum mini≤m xi = mini≤m xi,1 , . . . , mini≤m xi,d . Let X1 , . . . , Xm be iid random vectors with common df F and survivor function F . The survivor function of the minimum is given by m P min Xi > x = F (x). i≤m

5 Falk,

M. and Reiss, R.–D. (2001). Estimation of the canonical dependence parameter in a class of bivariate peaks–over–threshold models. Statist. Probab. Letters 52, 9–16

12.2. The Gumbel–McFadden Model

301

Moreover, the representation mini≤m Xi = − maxi≤m (−Xi ) holds again. As in the univariate case, cf. (1.38) and (1.38), there is a one–to–one relationship between limiting dfs of maxima and minima. If P max(−Xi ) ≤ bm + am x → G(x), m → ∞, i≤m

then for cm = am and dm = −bm we have P min Xi ≤ dm + cm x → G(−x), i≤m

m → ∞.

of sample minima are necessarily of the form We see that the limiting dfs G G(x) = G(−x). Conversely, G(x) can be written as the survivor function of G applied to −x. Limiting dfs of minima can be characterized again by the min–stability. The m survivor function F (and, thus, the df F ) is min–stable, if F (dm + cm x) = F (x) for certain vectors dm and cm > 0.

12.2

The Gumbel–McFadden Model

We ﬁrst deal with certain bivariate dfs which are the Gumbel type II dfs as mentioned in [20], page 247, in the form of a min–stable df. D–variate versions are introduced in (12.32) and (12.33). The section is concluded with an application to utility–maximizing.

Bivariate Gumbel Type II Distributions This is another model of EV dfs with exponential margins G2,−1 (x) = exp(x), x < 0,. The bivariate Gumbel type II dfs Hλ are parameterized by a dependence parameter λ which ranges from 1 to inﬁnity. We have independence for λ = 1 and total dependence for λ = ∞. Let

1/λ , x, y < 0. (12.28) Hλ (x, y) = exp − (−x)λ + (−y)λ Notice that H1 (x, y) = exp(x) exp(y) and Hλ (x, y) → exp(min{x, y}) =: H∞ (x, y) for x, y < 0 as λ → ∞. Taking partial derivatives one gets the density

2(1/λ−1) hλ (x, y) = Hλ (x, y)(xy)λ−1 (−x)λ + (−y)λ

1/λ−2 . (12.29) + (λ − 1) (−x)λ + (−y)λ Several distributional properties of Hλ can be conveniently deduced from a representation in terms of independent random variables (due to L. Lee6 and J.–C. 6 Lee,

L. (1979). Multivariate distributions having Weibull properties. J. Mult. Analysis 9, 267–277.

302

12. Multivariate Maxima

Lu and G.K. Bhattacharya7). Let U , V1 , V2 and Zλ be independent random variables, where U is uniformly distributed on [0, 1], the Vj have the common exponential df G2,−1 (x) = exp(x), x < 0, and Zλ is a discrete random variable with P {Zλ = 0} = 1 − 1/λ and P {Zλ = 1} = 1/λ. Let V = V1 + Zλ V2 . Random variables X1 and X2 with joint df Hλ have the representation

(X1 , X2 ) = U 1/λ V, (1 − U )1/λ V

in distribution.

(12.30)

Moments of Gumbel–McFadden distributions can be easily deduced from (12.30). In particular, there is a one–to–one relation between the dependence parameter λ and the correlation coeﬃcient ρ(λ) of Lλ . One gets ρ(λ) = 2Γ2 (1 + 1/λ)/Γ(1 + 2/λ) − 1. This function is plotted in Fig. 12.4.

correlation coefficient

1

0.5

Fig. 12.4. Correlation coeﬃcient ρ of Hλ plotted against the shape parameter λ.

0.0 1

2

4

3

5

shape parameter

The Pickands dependence function of the Gumbel df Hλ is 1/λ Dλ (z) = (1 − z)λ + z λ .

(12.31)

The canonical parameter is given by ϑ = 2 − 21/λ . 7 Lu, J.–C. and Bhattacharya, G.K. (1991). Inference procedures for bivariate exponential model of Gumbel. Statist. Probab. Letters 12, 37–50.

12.2. The Gumbel–McFadden Model

303

Gumbel–McFadden Distributions Certain d–variate extensions of the Gumbel distributions are due to Daniel McFadden8 . We have

1/λ (−xi )λ Hλ,d (x) = exp − , x < 0, (12.32) i≤d

and as another extension

1/λ(k) λ(k) ak (−xi ) , G(x) = exp − k≤m

x < 0,

(12.33)

i

* where i varies over Bk ⊂ {1, . . . , d}, k≤m Bk = {1, . . . , d}, ak > 0, and λ(k) ≥ 1. To get standard exponential margins in the second case, the additional condition k≤m ak I(i ∈ Bk ) = 1 must be satisﬁed for i = 1, . . . , d. In the following lines it is shown that Gumbel–McFadden dfs Hλ,d lead to a multinomial logit model in the utility–maximizing theory. In that application, EV dfs are convenient because one gets an elegant representation for certain choice probabilities.

An Application to Utility–Maximizing It is the common situation that consumers can choose between diﬀerent alternatives as, e.g., between diﬀerent • residential locations8 described by certain conﬁgurations of attributes such as accessibility, quality of public services, neighborhood, etc. • residential end–use energy conﬁgurations9. It is understood that a consumer chooses that conﬁguration which provides a maximum utility. The utility of a conﬁguration, labeled by the index i, will be expressed by Ui = vi + Xi ,

i = 1, . . . , d,

where vi is a function of the above mentioned attributes and of consumer’s characteristics (family size, income), and Xi is an unobserved random variable. 8

McFadden, D. (1978). Modelling the choice of residential location. In: Spatial Interaction Theory and Planning Models, pp. 75–96, A. Karlquist et al. (eds.), North Holland, Amsterdam. Reprinted in The Economics of Housing, Vol. I, pp. 531–552, J. Quigley (ed), Edward Elgar, London, 1997. 9 Cowing,

T.G. and McFadden, D.L. (1984). Microeconomic Modeling and Policy Analysis. Academic Press, Orlando.

304

12. Multivariate Maxima The probability of the choice of the conﬁguration with label i is pi = P {Ui > Uj for j = 1, . . . , d with j = i}

which can be expressed by means of the ith partial derivative of the joint df F of the X1 , . . . , Xd . We have pi =

∂ F (vi + z − vj )j≤d dz . ∂xi

(12.34)

This formula will be applied to dfs F = G, where G are EV dfs with univariate Gumbel margins. Let G(x) = exp(−Ψ(x)) be an EV df with univariate exponential margins. From (12.20) and (12.23) we know that the auxiliary function Ψ is homegeneous of order 1, that is Ψ(ay) = aΨ(y),

y < 0, a > 0,

(12.35)

which implies that the partial derivative is homogeneous of order 0, that is ∂ ∂ Ψ(ay) = Ψ(y), ∂xi ∂xi

y < 0, a > 0.

In addition, EV dfs with univariate Gumbel margins are of the form

G(x) = exp − Ψ (−e−xj )j≤d , cf. (12.18). Using the homogeneity properties one gets pi

= = =

∂ Ψ (−e−(vi +z−vj ) )j≤d exp − Ψ (−e−(vi +z−vj ) )j≤d dz ∂xi

∂ Ψ (−evj )j≤d exp − e−(vi +z) Ψ (−evj )j≤d dz (−e−z ) ∂xi

∂ (12.36) Ψ (−evj )j≤d Ψ (−evj )j≤d . − evi ∂xi (−e−z )

In the special case of a Gumbel–McFadden df Hλ,d one gets the multinomial logit form vj λ e pi = evi λ j≤d

for the choice probabilities pi . We have seen that the modeling of the random disturbances in utilities by means of EV distributions leads to attractive formulas for the choice probabilities.

12.3. Estimation in Extreme Value Models

12.3

305

Estimation in Extreme Value Models

A multivariate EV distribution is determined by the parameters (shape, location and scale parameter) in the single components and by the parameters of the copula or by the copula itself in the nonparametric approach. The ﬁrst class of parameters can be estimated by means of the methods presented in Part II; new estimation procedures must be developed for the second problem.

Estimation by Piecing–Together from Lower–Dimensional Margins Let xi = (xi,1 , . . . , xi,d ), i = 1, . . . , k, be governed by the d–variate EV df G that is determined by the location, scale and shape parameter vectors µ, σ and γ and, in addition, by the copula C. From (12.18) we know that G has the representation

G(x) = C Gγj ,µj ,σj (xj ) j≤d for vectors x = (x1 , . . . , xd ), where Gγj ,µj ,σj is the jth marginal df of G. If C ≡ Cλ is given in a parametric form, then we speak of a dependence parameter λ. To estimate G one must construct estimates of µ, σ, γ and C (with C replaced by λ in the parametric case). One can easily ﬁnd estimates of µ, σ and γ by taking estimates in the single components. Notice that the data x1,j , . . . , xk,j in the jthe component are governed by the jthe marginal df Gγj ,µj ,σj of G. Therefore, one may take estimates of the parameters γj , µj and σj as introduced in Section 4.1. The deﬁnition of the copula C suggests to base the estimation of C or the unknown dependence parameter λ on the transformed vectors

z i = Gγˆj,k ,ˆµj,k ,ˆσj,k (xi,j ) j≤d , i = 1, . . . , k. (12.37) Notice that the z i only depend on the xi . Subsequently, the z i are regarded k be an estimate of C based on z 1 , . . . , z k as vectors that are governed by C. Let C within the copula model. If C is of the parametric form Cλ , then construct an ˆ k of the parameter λ. estimate λ ˆ k of γ, ˆ k, σ ˆ k and λ ˆk, µ Thus, the piecing–together method yields estimates γ µ, σ and λ or, alternatively, the estimate

k (x) = C k Gγˆ ,ˆµ ,ˆσ (xj ) G j,k j,k j,k j≤d k can be of the form C ˆ 10 . of the EV df G, where C λk 10 For

supplementary results concerning multivariate EV models see [16] and Tiago de Oliveira, J. (1989). Statistical decisions for bivariate extremes. In [14], pp. 246–261, or Smith, R.L., Tawn, J.A. and Yuen, H.K. (1990). Statistics of multivariate extremes. ISI Review 58, 47–58.

306

12. Multivariate Maxima

The Pickands Estimator in the Marshall–Olkin Model We give a simple estimate of the dependence parameter λ in the model of standard Marshall–Olkin dfs, namely, for (x1 , y1 ), . . . , (xk , yk ),

ˆk = 2 + k max{xi , yi }. (12.38) λ i≤k

This estimate can be made plausible in the following way: from (12.11), deduce that (2 − λ) max{X, Y } is an exponential random variable with df G2,−1 , if (X, Y ) has the Marshall–Olkin df Mλ . Therefore, 1 1

max{xi , yi } ≈ E max{X, Y } = − k 2−λ i≤k

ˆ k ≈ λ. This yields estimates within an enlarged model. and λ Example 12.3.1. (American Football (NFL) Data.) We partially repeat the analysis by Cs¨ org˝ o and Welsh11 . The data were extracted from game summaries published in the Washington Post newspaper during three consecutive weekends in 1986. Consider the random game times to the ﬁrst • ﬁeld goal (denoted by U ); • unconverted touchdown or safety (denoted by V ), • point–after touchdown (denoted by W ). Because the game time of the conversion attempt after a touchdown is zero, we have X = min{U, W }:

game time to the ﬁrst kicking of the ball between the goalposts;

Y = min{V, W }:

game time to the ﬁrst moving of the ball into an endzone.

Notice that X = Y if the ﬁrst score is a point–after touchdown which happens with a positive probability. Assuming for a while that the random variables U, V, W are exponential it is reasonable to assume that (X, Y ) has a Marshall–Olkin distribution. Table 12.1 contains the ﬁrst and last three data vectors. Table 12.1. Scoring times (minutes : seconds) from 42 American Football games. x: y:

2:03 3:59

9:03 9:03

0:51 0:51

··· ···

19:39 10:42

17:50 17:50

10:51 38:04

The data (xi , yi ), expressed in decimal minutes, are stored in the ﬁle football.dat. Because we introduced the Marshall–Olkin distributions in the version for maxima, we ﬁrst change the signs of the data. Estimation in the EV model shows that a Weibull modeling for the single components is adequate, yet with α = −1. The MLE(EV1) procedure provides the parameters α1 = −1.39, µ1 = 0, σ1 = 9.92 and α2 = −1.18, 11 Cs¨ org˝ o,

S. and Welsh, A.H. (1989). Testing for exponential and Marshall–Olkin distributions. J. Statist. Plan. Inference 23, 287–300.

12.3. Estimation in Extreme Value Models

307

µ2 = 0, σ2 = 14.34 in the ﬁrst and second component. Thus, we have Weibull components, yet we still assume a bivariate Marshall–Olkin structure. Check that −(−X/σ)−α has the exponential df G2,−1 if X has the df G2,α,0,σ . Therefore, a modeling by standard Marshall–Olkin dfs is more adequate for the transformed data

i = 1, . . . , 42. (12.39) (xi , yi ) = − (−xi /12)1.2 , −(−yi /12)1.2 , ˆ = 0.63 for the dependence parameter λ. Based on (xi , yi ) one obtains the estimate λ Finally, the converse transformations provide an estimated df for the original data.

An application of the ML method is a bit more complicated, because one must deal with more sophisticated densities, namely densities with respect to the sum of the 2–dimensional Lebesgue measure on the plane and the 1–dimensional Lebesgue measure on the main diagonal.

Estimation in the Gumbel–McFadden and H¨ usler–Reiss Models First, specify a model for the univariate margins. We will primarily deal with PTEs (piecing–together estimates) so that ﬁrst the parameters in the univariate margins are estimated by means of one of the estimation methods in Chapter 4. After a transformation, as explained in (12.37), we may assume that the data are governed by the df Lλ or Hλ . Thus, an estimate of the dependence parameter λ or the canonical parameter ϑ must be constructed. • Moment Method: because of the one–to–one relationship between the dependence parameter λ and the correlation coeﬃcient ρ, one obtains an estimate of λ based on the sample correlation coeﬃcient. • Pickands Estimator: assume that the dfs G are given in the Pickands representation (12.20). Deduce that ((2 − T (G)) max(X, Y ) is an exponential random variable with exponential df G2,−1 , where T (G) is the canonical parameter. Therefore, generalizing (12.38) we conclude that

T(G)k = 2 + k max{xi , yi } (12.40) i≤k

is an estimator of the functional parameter T (G), which also provides an estimator of the canonical parameter ϑ within the parametric framework. • Maximum Likelihood Method: from the density in (12.29) or (12.16), deduce the likelihood equation and calculate the MLE numerically. The preceding moment or Pickands estimate may serve as the initial value of the iteration procedure.

308

12. Multivariate Maxima

Such PTEs may also serve as initial values of an iteration procedure to evaluate the MLE in the full bivariate model. Example 12.3.2. (Ozone Concentration in the San Francisco Bay Area.) We partially repeat the analysis of ozone concentration in the aforementioned article by Harry Joe4 . The data set (stored in the ﬁle cm–ozon1.dat) consists of 120 weekly maxima of hourly averages of ozone concentrations measured in parts per hundred million for the years 1983–1987 for each of the ﬁve monitoring stations (Concord (cc), Pittsburg (pt), San Jose (sj), Vallejo (va), Santa Rosa (st)). Weeks within the months April to September are only taken, because there are smaller maxima in the winter months. The ﬁrst 21 maxima are listed in Table 12.2 to give a ﬁrst impression of the data. Table 12.2. The ﬁrst 21 maxima at 5 stations. No.

cc

pt

sj

va

st

No.

cc

pt

sj

va

st

No.

cc

pt

sj

va

st

1. 2. 3. 4. 5. 6. 7.

7 6 6 6 6 5 9

6 7 7 6 6 6 9

6 5 8 5 5 5 7

6 5 5 4 4 4 7

5 4 6 4 4 4 5

8. 9. 10. 11. 12. 13. 14.

10 7 11 12 7 8 8

11 7 14 10 7 8 7

11 6 13 12 7 8 7

8 4 13 8 4 5 5

5 4 6 5 4 5 4

15. 16. 17. 18. 19. 20. 21.

13 8 7 9 13 15 5

8 8 8 8 11 13 6

15 8 6 8 14 13 6

8 5 3 4 12 10 4

7 4 4 5 7 7 4

Next, MLEs for the Gumbel (EV0) and the full EV model are calculated for the single components. The estimates suggest to take a Gumbel modeling for the margins. This is supported by a nonparametric visualization of the data. We have not analyzed any other data in this book with a better ﬁt to a parametric model (perhaps with the exception of Michelson’s data concerning the velocity of light in the air). Of course the stronger discrete nature of the data becomes visible. Table 12.3. MLE(EV0) and MLE(EV) for the single stations.

MLE(EV0) MLE(EV)

γ 0 −0.06

cc µ 7.21 7.28

Univariate Parameters pt σ γ µ σ γ 2.02 0 6.81 1.62 0 2.06 0.06 6.76 1.58 0.00

MLE(EV0) MLE(EV)

γ 0 0.12

va µ 5.40 5.29

σ 1.66 1.58

γ 0 0.11

st µ 4.54 4.48

sj µ 7.23 7.23

σ 2.13 2.13

σ 1.10 1.05

We also include in Table 12.4 the estimated pairwise dependence parameters λ at the 5 diﬀerent stations.

12.4. A Spectral Decomposition Methodology

Dependence Parameter λ cc pt sj va 2.7 1.9 1.5 1.7 1.6 1.5 1.3 1.2 1.2 1.6

pt sj va st

309

Table 12.4. MLEs of pairwise dependence parameters λ.

usler–Reiss modeling As it was already reported in the article by H. Joe4 that the H¨ is adequate for the present data set. This judgement is supported by 3–D plots in Fig. 12.5 of a bivariate kernel density for the cc–pt data (38 distinct pairs with certain numbers of multiplicities) and the estimated parametric density.

0

0

5

y

10

15 15

5 10 x

0

0

5

y

10

15 15

5 10 x

Fig. 12.5. Bivariate kernel density (left) and parametric density (right) for cc–pt data.

What has been achieved in the multivariate framework is promising yet this approach is still in a research stadium.

12.4

A Spectral Decomposition Methodology

We merely state some basic properties and results about a certain spectral decomposition in the special case of bivariate distributions. For a continuation we refer to Section 13.3. A detailed account of this methodology, including the d–dimensional case, is given in Falk et al. [17].

A Spectral Decomposition Any vector (x, y) ∈ (−∞, 0]2 with (x, y) = (0, 0) can be uniquely represented by means of the angular and radial components z and c with z = x/(x + y) ∈ [0, 1] and c = x + y ≤ 0. We have (x, y) = (cz, c(1 − z)).

(12.41)

310

12. Multivariate Maxima

Any df H with support (−∞, 0]2 may be written in the form H(cz, c(1 − z)). Putting Hz (c) = H(cz, c(1 − z)), z ∈ [0, 1], c ≤ 0, (12.42) one gets a one–to–one representation of H by means of the family of univariate dfs {Hz : z ∈ [0, 1]} which we call spectral decomposition of H. Check that H0 and H1 are the marginal dfs of H in the 1st and 2nd component. First, we provide two examples where H is the df of independent exponentially and, respectively, uniformly distributed random variables: (a) if H(x, y) = exp(x + y), x, y ≤ 0, then c ≤ 0,

Hz (c) = exp(c),

(b) if H(x, y) = (1 + x)(1 + y), −1 ≤ x, y ≤ 0, then Hz (c) = 1 + c + c2 z(1 − z),

c ≤ 0, 1 + c + c2 z(1 − z) ≤ 0.

Next we extend (a) to bivariate EV dfs in general. (c) A bivariate EV df G with Pickands dependence function D, cf. (12.20), has the spectral dfs Gz (c) = exp(cD(z)), c ≤ 0. Notice that Gz is an exponential df with reciprocal scale parameter D(z). In particular, the spectral dfs are univariate EV dfs. We also make use of the partial derivative hz (c) =

∂ Hz (c). ∂c

(12.43)

In the preceding examples (a)–(c) we have (a ) hz (c) = exp(c),

c ≤ 0;

(b ) hz (c) = 1 + 2cz(1 − z), (c ) gz (c) = D(z) exp(cD(z)),

c ≤ 0, 1 + c + c2 z(1 − z) ≤ 0, c ≤ 0.

A Spectral Condition Assume that H is a bivariate df with support (−∞, 0] such that Hz (c) = 1 + cg(z)(1 + o(1)),

c ↑ 0, z ∈ [−1, 0],

(12.44)

where g(0) = g(1) = 1. Then, the following assertions hold, cf. [17], Theorem 5.3.2, which is formulated for the d–variate case:

12.4. A Spectral Decomposition Methodology

311

• g(z) = D(z) is a Pickands dependence function, • H is in the domain of attraction of the EV df G with Pickands dependence function; more precisely, x y , → G(x, y), n → ∞. Hn n n It is apparent that condition (12.44) is satisﬁed with D(z) = 1 in the cases (a) and (b), and for D(z) in the general case (c) of EV dfs. Because of the standardization D(0) = D(1) = 1 we get for the marginal dfs H0 (c) = 1 + c(1 + o(1))

and H1 (c) = 1 + c(1 + o(1)).

Therefore, it suggests itself to transform original data to (−1, 0)–uniform or exponential data before applying results based on this condition. Condition (12.44) can be veriﬁed by the following “diﬀerentiable” version: if hz (c) > 0 for c close to zero, z ∈ [0, 1], and hz (c) = g(z)(1 + o(1)),

c ↑ 0, z ∈ [0, 1],

(12.45)

where g(0) = g(1) = 1, then condition (12.44) holds. It is evident that condition (12.45) is satisﬁed for the examples in (a )–(c ) at a certain rate. In Section 13.3 we formulate an expansion for hz (c) which speciﬁes the rate at which (12.45) is attained. This expansion is applied to the testing of tail dependence against tail independence. Section 13.3 also provides further examples for which condition (12.45) is satisﬁed.

The Spectral Decomposition of a GP Distribution Function The spectral decomposition of a bivariate GP df W = 1 + log G, which will be introduced in Section 13.1, consists of uniform dfs, we have Wz (c) = 1 + cD(z),

−1/D(z) ≤ c ≤ 0,

for 0 ≤ z ≤ 1, where D is again the pertaining Pickands dependence function. Thus, the univariate margins of bivariate GP dfs are again GP dfs and, more general, the spectral dfs of bivariate GP dfs are GP dfs.

The Random Angular and Radial Components Let (X, Y ) be a random vector with joint df H which has the support in (−∞, 0]2 . Then, the vector (X/(X + Y ), X + Y )

312

12. Multivariate Maxima

may be called Pickands transform with the angular and radial component in the 1st and 2nd component (cf. Falk et al. [17], pages 150–153). It turns out that the angular and radial components have remarkable, stochastic properties. They are conditionally independent conditioned on X + Y > c for GP dfs W under mild conditions. We have unconditional independence if one takes a diﬀerent version of the GP df, namely that truncated outside of {(x, y) ∈ (−∞, 0]2 : x + y > c} with c > −1. Moreover, the asymptotic conditional independence holds for dfs in a neighborhood of W . This result for GP distributions is closely related to that for spherical distributions, see Section 11.2. In that section, the radial component is the L2 –norm of the spherical random vector, whereas the radial component X + Y in the present section is related to the L1 –norm. The testing of tail dependence against tail independence in Section 13.3 will be based on the radial component.

Chapter 13

Multivariate Peaks Over Threshold co–authored by M. Falk1

We already realized in the univariate case that, from the conceptual viewpoint, the peaks–over–threshold method is a bit more complicated than the annual maxima method. One cannot expect that the questions are getting simpler in the multivariate setting. Subsequently, our attention is primarily restricted to the bivariate case, this topic is fully worked out in [16], 2nd ed., for any dimension. A new result about the testing of tail dependence is added in Section 13.3.

13.1

Nonparametric and Parametric Generalized Pareto Models

We introduce bivariate generalized Pareto (GP) distributions and deal with the concepts of canonical and tail–dependence parameters within this framework.

Introducing Bivariate GP Distributions In analogy to the univariate case, deﬁne a bivariate GP distribution2 pertaining to an EV df G by W (x, y) = 1 + log G(x, y), 1 Katholische 2 Kaufmann,

if log G(x, y) ≥ −1.

(13.1)

Universit¨ at Eichst¨ att; now at the University of W¨ urzburg.

E. and Reiss, R.–D. (1995). Approximation rates for multivariate exceedances. J. Statist. Plan. Inf. 45, 235–245; see also the DMV Seminar Volume [16].

314

13. Multivariate Peaks Over Threshold

The univariate margins of the bivariate GP df W are just the univariate GP dfs pertaining to the margins of the EV df G. If G is an EV df such that the Pickands representation (12.20) holds, then y y , if (x + y)D > −1, (13.2) W (x, y) = 1 + (x + y)D x+y x+y where D is the Pickands dependence function of G. In this case, the univariate margins of W are both the uniform df W2,−1 = 1 + x on [−1, 0]. Because D ≤ 1, we know that the condition log G(x, y) ≥ −1 is satisﬁed if x + y ≥ −1. In the subsequent calculations, we assume that the latter condition is satisﬁed to avoid technical complications. &2 , then & is any bivariate GP df with margins W &1 and W If W

−1 & −1 (1 + y) , & (1 + x), W & W −1 < x, y < 0, (13.3) W (x, y) = W 1 2 is of the standard form (13.2).

Tajvidi’s Deﬁnition of Bivariate GP Distributions The deﬁnition of a bivariate GP df is not as self–evident as in the univariate case. We mention the relation of the preceding deﬁnition of a GP df to another one. Consider the map

(13.4) m(u,v) (x, y) = max(x, u), max(y, v) which replaces marginal values x < u and, respectively, y < v by the marginal thresholds u and v as illustrated in Fig. 13.1.

u

v Fig. 13.1. Putting points (x, y) to m(u,v) (x, y).

We refer to Section 13.3, where the map mu,v is once again utilized in the context of a point process approximation.

13.1. Nonparametric and Parametric Generalized Pareto Models

315

Let (X, Y ) be a random vector with GP df W as introduced in (13.1) and let u, v be thresholds such that log G(u, v) = −1. Then, the random vector m(u,v) (X, Y ) has the df ⎧ (x, y) ≥ (u, v) ⎨ W (x, y) & (x, y) = if (13.5) W ⎩ 0 otherwise which is a GP df as deﬁned by Tajvidi3 . Thus, both deﬁnitions are closely related to each other. We remark that • both distributions are identical in the region {(x, y) : x > u, y > v}, & does not possess the property • in contrast to the GP df W , the modiﬁcation W that the margins are again GP dfs. In view of the latter remark, we prefer to deal with GP dfs as introduced in (13.1). Using such dfs also facilitates transformations in the univariate margins.

Canonical and Tail Dependence Parameters Now, let (X, Y ) be a random vector with df bivariate GP df W as given in (13.2). Applying (10.7) one gets for −1/2 ≤ u < 0, P (Y > u|X > u)

= =

2|u| − 2|u|DW (1/2) |u| 2 1 − DW (1/2)

=: T (W ),

(13.6)

where DW is the Pickands dependence function pertaining to W . We see that the conditional probabilities do not depend on the threshold u. Notice that T (W ) is just the canonical parameter introduced in (12.25) for bivariate EV dfs. Thus, for a parametric family of GP dfs Wϑ , for which there is a one–to–one relation between the original parameter λ and T (Wλ ), we may introduce another representation by taking the canonical parameter ϑ = T (Wλ ). It is apparent from (13.6) that the survivor function Wϑ satisﬁes W(u, u)/|u| = T (W ), 3 Tajvidi,

−1/2 ≤ u ≤ 0.

(13.7)

N. (1996). Characterization and some statistical aspects of univariate and multivariate generalised Pareto distributions. PhD Thesis, Dept. of Mathematics, University of G¨ oteborg.

316

13. Multivariate Peaks Over Threshold

Recall from (12.26) that such a relation approximately holds for the pertaining EV df. In addition, we have T (W ) = χ(q),

q ≥ 1/2,

(13.8)

where χ(q) is the tail dependence parameter at the level q introduced in (2.60).

Parametric Models of Bivariate GP Distributions Explicit representations of Wϑ , where ϑ is the canonical parameter, are given for the bivariate Marshall–Olkin, Gumbel–McFadden and H¨ usler–Reiss dfs. • (Marshall–Olkin–GP dfs.) Because ϑ = λ, we obtain from (13.1) and (12.11), Wϑ (x, y) = 1 + (1 − ϑ)(x + y) + ϑ min{x, y},

(13.9)

whenever x, y ≤ 0 and the right–hand side exceeds zero. • (Gumbel–McFadden–GP dfs.) Because ϑ = 2 − 21/λ , we have λ = (log 2)/ log(2 − ϑ). (13.1) and (12.28) yield log(2−ϑ) log 2 log 2 log 2 , Wϑ (x, y) = 1 − (−x) log(2−ϑ) + (−y) log(2−ϑ)

(13.10)

whenever x, y ≤ 0 and the right–hand side exceeds zero. • (H¨ usler–Reiss–GP dfs.) Because ϑ = 2(1 − Φ(1/λ)), we have λ = 1/Φ−1 (1 − ϑ/2). Deduce from (13.1) and (12.19) that y x y + ψϑ x, (13.11) Wϑ (x, y) = 1 + ψϑ x y where the auxiliary function ψϑ is deﬁned by 1 ϑ −1

log(z) , + 1− ψϑ (z) = Φ Φ 2 2Φ−1 1 − ϑ2

0 < z < ∞,

whenever x, y < 0 and the right–hand side in (13.11) exceeds zero. In all three cases we have W0 (x, y) = 1+(x+y) and W1 (x, y) = 1+min{x, y}. It is remarkable that W0 is the uniform distribution on the line {(x, y) : x, y ≤ 0, x + y = −1}.

13.1. Nonparametric and Parametric Generalized Pareto Models

317

The Canonical Dependence Function We deﬁne the canonical dependence function of a bivariate GP df W by TW (z) = 2(1 − DW (z)),

(13.12)

where DW is again the Pickands dependence function pertaining to W . In conjunction with EV distributions, Huang4 studied the stable tail dependence function y l(x, y) = (x + y)D x+y which is the function −Ψ(x, y) on page 304. For obvious reasons we prefer to work with a real–valued function which varies between zero and one. The value of the canonical dependence function TW (1/2) at z = 1/2 is the canonical parameter T (W ). We also write Tϑ etc., if there is a parametric family of GP dfs reresented in the canonical parameterization. Given the canonical parameterization we have T0 (z) = 0 and T1 (z) = min(2z, 2(1 − z)), if tail independence and, respectively, total tail dependence hold. In Fig. 13.2 we plot several canonical dependence functions Tϑ for Gumbel– McFadden and Marshall–Olkin dfs ranging from the case of tail independence to the one of total dependence.

1

0.75

0.5

Fig. 13.2. Canonical dependence functions Tϑ for Gumbel–McFadden (solid) and Marshall–Olkin (dashed) distribution with canonical parameters ϑ = 0, 0.25, 0.5, 0.75, 1.

0.25

0.0 0

1

We provide a representation of the canonical dependence function TW by means of the survivor function W which extends that for the canonical parameter, see (13.7). 4 Huang, X. (1992). Statistics of bivariate extreme values. PhD Thesis, Erasmus University Rotterdam.

318

13. Multivariate Peaks Over Threshold

Let W be a standard bivariate GP df as given in (13.2). From the representation (10.7) of a survivor function deduce that 2W(−d(1 − z), −dz)/d = TW (z)

(13.13)

for 0 < d ≤ 1 and 0 ≤ z ≤ 1. Notice that the formula (13.7) for the canonical parameter T (W ) = TW (1/2) is a special case. In addition, one must take |u| = d/2. Here, z and d may be regarded as direction and distance measures. Therefore, by estimating the survivor function W in (13.13)—for certain selected values d which may depend on z—one gets estimates of the canonical dependence function TW and the canonical parameter T (W ).

13.2

Estimation of the Canonical Dependence Function

In this section we estimate the canonical dependence function TW by means of a sample version of the survivor function. Consequently, the actual df F can be estimated in the upper tail region by the piecing–together method. The results presented here should be regarded as a preliminary introduction5 .

Estimation Within the Standard GP Model Let (xi , yi ) be governed by the standard GP df W as given in (13.2). In view of (13.13) one may take 2

I(xi > −d(1 − z), yi > −dz) Tn (z) = nd

(13.14)

i≤n

as an estimate of the canonical dependence function TW (z), where 0 < d ≤ 1 can be selected by the statistician. Spezializing this to z = 1/2 one gets by Tn (1/2) an estimate of the canonical parameter T (W ). This approach to estimating the canonical dependence function includes the case where the modeling of an actual survivor function F by means of W is suﬃciently accurate for x, y > u ≥ −1. In that case, one must take d = |u|.

Transforming Univariate GP Margins In contrast to the preceding lines we consider the more general situation of bivari& having the GP margins W &1 and W &2 which are not necessarily equal ate GP dfs W to the uniform df on the interval [−1, 0]. 5 For

further results see Falk, M. and Reiss, R.–D. (2003). Eﬃcient estimators and LAN in canonical bivariate pot models. J. Mult. Analysis 84, 190–207.

13.2. Estimation of the Canonical Dependence Function

319

1. Use estimated univariate GP distributions to transform the original data to the standard form of [−1, 0]–uniform data; 2. estimate the canonical dependence function (the canonical parameter) as in (13.14) based on the transformed data, 3. use the estimated canonical dependence function and univariate GP dfs to &. construct an estimate of the GP df W This approach can be also applied to the situation, where univariate GP dfs &1 and W &2 are ﬁtted to the upper tails of actual univariate margins F1 and F2 W above the thresholds v(1) and v(2). Assume that the bivariate GP modeling of the actual bivariate distribution is valid for x, y > u = max(u(1), u(2)), where the u(i) are the transformed thresholds v(i).

Arbitrary Margins Let X and Y be random variables having continuous dfs FX and FY . Put −1 (1 − d(1 − z)), Y > FY−1 (1 − dz) . (13.15) p(d, z) := P X > FX A natural estimator of the probability p(d, z) is pˆn (d, z) =

1 I xi > x[n(1−d(1−z))]:n , yi > y[n(1−dz)]:n , n i≤n

where (xi , yi ) are realizations of (X, Y ). Applying the quantile transformation one gets p(d, z) = P U > −d(1 − z), V > −dz

= F − d(1 − z), −dz for 0 < d ≤ 1 and 0 ≤ z ≤ 1, where U and V are [−1, 0]–uniform random variables with common df F . In view of (13.13) it is plausible to assume that for all 0 ≤ z ≤ 1,

p(d, z) − W − d(1 − z), −dz d → 0, d → 0, (13.16) where W is a standard GP df. For the probabilities in (13.15) one gets 2p(d, z)/d → TW (z),

d → 0,

Thus, TW may be regarded as a limiting canonical dependence function. Putting d = k/n, one arrives at the estimator

2 I xi > xn−[k(1−z)]:n , yi > yn−[kz]:n Tn,k (z) = k i≤n

(13.17)

320

13. Multivariate Peaks Over Threshold

of the limiting canonical dependence function. For the direction z = 1/2 one gets again an estimator of the canonical parameter. In Fig. 13.3 we plot the estimate Tn,k (z) of the canonical dependence function based on n = 500 Gumbel–McFadden data generated under the parameter ϑ = 0.5 with k = 60. For z = 0.5 one gets an exceptional accuarate estimate of the canonical parameter. 1

0.5

Fig. 13.3. Estimated canonical dependence function generated under the canonical parameter ϑ = 0.5.

0.0 0.5

0.0

1

direction z

A somewhat related estimator was examined by Deheuvels6 in the context of “tail probabilities”. We refer to Huang4 and Drees and Huang7 for recent asymptotic results and a survey of the literature.

Estimating by Piecing–Together Piecing together • the estimated univariate GP dfs, • the estimated parametric bivariate standard GP df one gets an approximation to the original bivariate df in the upper tail region. This approximation can be extrapolated to higher tail regions outside of the range of the data If this is done within the nonparametric framework—using the estimated canonical dependence function—then one should be aware that the resulting df is 6 Deheuvels,

P. (1980). Some applications to the dependence functions in statistical inference: nonparametric estimates of extreme value distributions, and a Kiefer type universal bound for the uniform test of independence. In: Nonparametric Statistical Inference, pp. 183–201, B.V. Gnedenko et al. (eds), North Holland, Amsterdam. 7 Drees, H. and Huang, X. (1998). Best attainable rates of convergence for estimators of the stable tail dependence function. J. Mult. Analysis 64, 25–47.

13.3. About Tail Independence

321

8

8

7

7

6

6

5

5

4

4

y

y

not a bivariate GP df. This can be achieved by using a concave majorant of the sample canonical dependence function. We present once again the scatterplot and contour plot in Fig. 10.3 and add an extrapolated contour plot.

3

3

2

2

1

1

0

0 0

1

2

4

3

5

6

7

8

0

1

x

2

4

3

5

6

7

8

x

Fig. 13.4. (left.) Contour plots of theoretical and sample survivor function. (right.) Estimated parametric extrapolation to the upper tail region.

13.3

About Tail Independence co–authored by M. Frick8

In this section we discuss some well–known measures of independence which characterize diﬀerent degrees of tail independence and indicate the relationship of these parameters to each other. Moreover, we study a test of tail dependence against tail independence based on the radial component. Recall from (12.10) that

¯ ρ (bn + b−1 x) = O n−2/(1+ρ) (log n)−ρ/(1+ρ) , Φ n ¯ ρ (x, y) = P {X > x, Y > y} is the survivor function of a standard normal where Φ vector (X, Y ) with correlation coeﬃcient ρ such that −1 < ρ < 1. Thus, according to (12.9), the right–hand side determines the rate at which the random maxima in each component become independent as the sample size goes to inﬁnity. The latter property was addressed as the upper tail independence of the bivariate normal df. 8 University

of Siegen.

322

13. Multivariate Peaks Over Threshold

The Coeﬃcient of Tail Dependence for Normal Vectors In an article by Ledford and Tawn9 , relation (12.10) is reformulated and strengthened with (X, Y ) replaced by the pertaining copula random vector (U, V ) = (Φ(X), Φ(Y )) where Φ is the univariate standard normal df. These authors prove that P {U > u, V > u} ∼ c(ρ)(1 − u)2/(1+ρ) (− log(1 − u))−ρ/(1+ρ) ,

u → 1, (13.18)

where c(ρ) = (1 + ρ)3/2 (1 − ρ)−1/2 (4π)−ρ/(1+ρ) . In that context, Coles et al.10 introduced the coeﬃcient of tail dependence at the level u, namely, χ(u) ¯ =

2 log P {U > u} − 1, log P {U > u, V > u}

(13.19)

and the coeﬃcient of tail dependence χ ¯ = lim χ(u). ¯

(13.20)

χ ¯=ρ

(13.21)

u→1

It is easy to verify that for the particular case of (0, 1)–uniformly distributed random variables U and V with normal dependence structure as in (13.18). As pointed out by Coles et al., the relation (13.21) “provides a useful benchmark for interpreting the magnitude of χ ¯ in general models.” The reason for introducing the coeﬃcient of tail dependence as another tail dependence parameter is the desire to distinguish between pairs of random variables which are both tail independent, that is P {U > u, V > u} = 0, u→1 P {U > u}

χ = lim χ(u) := lim u→1

cf. (2.61), but have diﬀerent degrees of independence at an asymptotic level of higher order.

The Coeﬃcient of Tail Dependence in General Models For non–normal vectors, the coeﬃcients of tail dependence χ(u) ¯ and χ ¯ are deﬁned in analogy to (13.19) and (13.20). We list some properties of χ(u) ¯ and χ: ¯ 9 Ledford, A.W. und Tawn, J.A. (1996). Statistics for near independence in multivariate extreme values. Biometrika 83, 169–187. 10 Coles,

S., Heﬀernan, J.E. and Tawn, J.A. (1999). Dependence measures for extreme value analyses. Extremes 2, 339–365.

13.3. About Tail Independence

323

• χ(u) ¯ and χ ¯ are symmetric in U and V ; • χ(u) ¯ and χ ¯ range between −1 and 1; • if U = V , then χ ¯ = 1. The pair (χ, χ) ¯ of tail dependence parameters may be employed to describe the tail dependence structure of two random variables: χ > 0, χ ¯=1

tail dependence with χ determining the degree of dependence.

χ = 0, χ ¯<1

tail independence with χ ¯ determining the degree of dependence.

Another Coeﬃcient of Tail Dependence We start again with a normal copula random vector (U, V ) pertaining to a standard normal vector with correlation coeﬃcient ρ with −1 < ρ < 1. Relation (13.18) can be written P {U > u, V > u} ∼ L(1 − u)(1 − u)1/η ,

u → 1,

(13.22)

where η = (1 + ρ)/2 and L(1 − u) = c(ρ)(− log(1 − u))−ρ/(1+ρ) with c(ρ) as in (13.18). The term η is again called coeﬃcient of tail dependence. Generally, if for a copula random vector (U, V ), a relation P {U > u, V > u} ∼ L(1 − u)(1 − u)1/η ,

u → 1,

(13.23)

holds, where L is a slowly varying function at 0 (i.e. as u → 1), then η is called coeﬃcient of tail dependence. It is evident that (13.22) is a special case. Notice that 0 < η ≤ 1. Example 13.3.1. (Morgenstern distributions.) The copula of the Morgenstern df with parameter −1 < α ≤ 1 is given by Cα (u, v) = uv[1 + α(1 − u)(1 − v)], see, e.g., Heﬀernan11 . The bivariate survivor function satisﬁes the relation P {U > u, V > u} ∼ (1 + α)(1 − u)2 ,

u → 1,

so that η = 1/2 and L(1 − u) = 1 + α. 11 Heﬀernan,

279–290.

J.E. (2000). A directory of coeﬃcients of tail independence. Extremes 3,

324

13. Multivariate Peaks Over Threshold

For further examples we refer to the article by Heﬀernan. We indicate the relationship between the diﬀerent dependence parameters χ, χ ¯ and η. χ ¯

=

χ

=

2η − 1; ⎧ u→1 ⎨ c if χ ¯ = 1 and L(u) −→ c ≥ 0, ⎩ 0 if χ ¯ < 1.

(13.24)

In Ledford and Tawn12 one may ﬁnd related formulas for the case of unequal thresholds u and v.

Estimating the Coeﬃcient of Tail Dependence In analogy to (2.62), a sample version pertaining to χ(u) ¯ based on data (xi , yi ), i = 1, . . . , n, is χ ¯n (u) =

log

1 n

i≤n

2 log(1 − u)

− 1, I(xi > x[nu]:n , yi > y[nu]:n )

(13.25)

which is an estimator of χ(u) ¯ as well as χ. ¯ Example 13.3.2. The illustration in Fig. 13.5 concerns a data set consisting of n = 2, 894 three–hourly–measurements of the surge and wave heights taken at Newlyn, a coastal town in England, see Example 13.3.6. The sample version χ ¯n (u) is plotted against the level u. The plot was generated by using the source code written by Coles, Heﬀernan and Tawn13 . This plot suggests an estimate of χ ¯n = 0.5 of χ. ¯ Near u = 1 there is a larger variation of χ ¯n (u) due to the fact that the estimate is merely based on a smaller number of extremes.

It would be desirable to get some theoretical results for this estimator (as well as for the serial version which is mentioned in the following lines).

Another Auto–Tail–Dependence Function In analogy to the auto–tail–dependence function ρ(u, h) for the parameter χ(u), see (2.63), one may introduce a auto–tail–dependence function ρ¯(u, h) for the tail– independence parameter χ(u) ¯ at the level u. 12 Ledford, A.W. und Tawn, J.A. (1997). Modelling dependence within joint tail regions. J.R. Statist. Soc. B 59, 475–499. 13 www.maths.lancs.ac.uk/˜currie/Code/DependenceMeasuresForExtremes.S

and -.txt

325

0.0 −1.0

−0.5

χn(u)

0.5

1.0

13.3. About Tail Independence

0.0

0.2

0.4

0.6

0.8

1.0

u

Fig. 13.5. The sample coeﬃcient of tail dependence χ ¯n (u) at the level u plotted against u for the wave and surge data.

Let again X1 , . . . , Xn be a series of identically distributed random variables with common df F . Then, for i ≤ n − h, put ρ¯(u, h) = =

2 log P {Xi > F −1 (u)} −1 log P {Xi > F −1 (u), Xi+h > F −1 (u)} 2 log P {X1 > F −1 (u)} − 1, log P {X1 > F −1 (u), X1+h > F −1 (u)}

(13.26)

where we implicitly assume stationarity in the dependencies. Likewise deﬁne an auto–tail–dependence function ρ(h) ¯ by ρ¯(h) = lim ρ¯(u, h). u→1

(13.27)

Again ρ¯(u, h) and ρ¯(h) can be estimated by the sample versions ρ¯n (u, h) =

log

1 n−h

2 log(1 − u) i≤n−h

−1 I(min(xi , xi+h ) > x[nu]:n )

(13.28)

based on the data x1 , . . . , xn . Example 13.3.3. (Gaussian AR(1) series.) We study once more a Gaussian AR(1) series as in Example 2.5.3 with autocorrelation function ρ(h) = dh . It is evident that the autocorrelation function ρ(h) and the auto–tail–dependence function ρ(h) ¯ are identical. Therefore, the sample versions estimate the same functions and should coincide to some extent.

13. Multivariate Peaks Over Threshold

0.0 0.2 0.4 0.6 0.8 1.0

0.0 0.2 0.4 0.6 0.8 1.0

326

0

5

10

15

time lag

0

5

10

15

time lag

Fig. 13.6. Autocorrelation functions (left) and auto–tail–dependence functions (right). In Fig. 13.6 we plot the sample autocorrelation function and sample auto–tail– independence function for u = 0.8 based on 200 Gaussian AR(1) data under the parameter d = 0.8. The theoretical correlation function ρ(h) = dh is included.

The sample autocorrelation function, which is based on the whole data set, provides a more accurate estimate of the theoretical curve than the sample autotail-dependence function because the latter sample function is merely based on the extremes.

A Spectral Expansion of Length 2 Next we make use of the spectral decomposition methodology, outlined in Section 12.4, to characterize the degree of tail independence. First we state a reﬁnement of condition (12.45) given in Section 12.4. Let X and Y be random variables having the joint bivariate df H with support (−∞, 0]2 . Assume that H satisﬁes a diﬀerentiable spectral expansion of length 2, i.e., hz (c) :=

∂ Hz (c) = D(z) + B(c)A(z) + o(B(c)), as c ↑ 0, ∂c

(13.29)

where B is regularly varying with exponent of variation β > 0. We say that H satisﬁes a diﬀerentiable spectral expansion of length 2 with exponent of variation β. Notice that B satisﬁes limc↑0 B(c) = 0. An important example is given by B(c) = |c|β . For this special case with β = 1, condition (13.29) was introduced in Falk et al. [16], 2nd ed. The present form is due to Frick et al.14 14 Frick,

M., Kaufmann, E. and Reiss, R.–D. (2006). Testing the tail–dependence based on the radial component, submitted.

13.3. About Tail Independence

327

Because (13.29) implies (12.45) we know that the function D in the expansion is necessarily a Pickands dependence function, cf. (12.20). We provide two examples of distributions for which (13.29) is satisﬁed with D(z) = 1 which is the Pickands dependence function for the case of independent marginal maxima. Example 13.3.4. (Bivariate Standard Normal Distribution) We consider again the bivariate standard normal distribution with correlation ρ ∈ (0, 1). Let H be its df after transformation to (−1, 0)–uniformly distributed margins. It satisﬁes the expansion hz (c) = 1 + B(c)A(z) + o(B(c)), with

as c ↑ 0,

(13.30)

˜ B(c) = |c|2/(1+ρ)−1 L(c),

˜ where L(c) := c(ρ)(− log |c|)−ρ/(1+ρ) with c(ρ) as in (13.18), and A(z) =

2 (z(1 − z))1/(1+ρ) . 1+ρ

˜ is slowly varying so that the function B is regularly varying with exponent The function L of variation β = 2/(1 + ρ) − 1. Substituting this result in equation (13.33) we receive again the relationship χ ¯ = ρ (see (13.21)). Additionally, L(1 − u) = (1 − u)−β B(−(1 − u))

and

η = (1 + β)−1

(13.31)

in (13.22).

In the following example, we extend the representation of hz (c) in the case of independent, (−1, 0)–uniformly distributed random variables, cf. (c ) on page 310, to Morgenstern random vectors. Example 13.3.5. (Morgenstern distributions.) A transformation of the Morgenstern df, whose copula form was given in Example 13.3.1, to (−1, 0)–uniformly distributed margins leads to the df H(u, v) = (1 + u)(1 + v)(1 + αuv) which satisﬁes the expansion hz (c) = 1 + c(1 + α)2z(1 − z) + o(c),

c ↑ 0.

Therefore, D(z) = 1, A(z) = −2z(1 − z), and B(c) = −(1 + α)c, the latter being a regularly varying function with exponent of variation β = 1. Recalling from Example 13.3.1 that η = 1/2, both (13.24) and the subsequent formula (13.33) imply that χ ¯ = 0.

328

13. Multivariate Peaks Over Threshold

Relationships Between Measures of Dependence Let again H be the df of a random vector (X, Y ) satisfying a diﬀerentiable spectral expansion of length 2. According to (13.6) we have χ = lim P (Y > c|X > c) = 2(1 − D(1/2)),

(13.32)

c↑0

where D is again the Pickands dependence function, and the expression 2(1 − D(1/2)) is the canonical parameter. This implies the following characterization of tail dependence : If D = 1, we have tail dependence. If D = 1, we have tail independence. In addition, if D = 1 one obtains a relationship between the exponent of variation β (in the spectral expansion of length 2) and the coeﬃcient of tail dependence χ. ¯ For that purpose let, in addition, B be absolutely continuous with a monotone density. This is satisﬁed, e.g., for the standard case of a regularly varying function B(c) = |c|β . Under these conditions one can prove that χ ¯=

1−β . 1+β

(13.33)

Notice that χ ¯ → 1 if β → 0, and χ ¯ → −1 if β → ∞.

Asymptotic Distributions of the Radial Component We assume that the spectral expansion (13.29) is valid and the partial derivatives hz (c) = ∂/∂c Hz (c) and ˜ hc (z) = ∂/∂z Hz (c) are continuous. Under these conditions, the conditional asymptotic distribution of the radial component X + Y for increasing thresholds c is provided (a result due to Frick et al. in the article cited on page 326, who extended a result in Falk et al. [16], 2nd ed., from the special case of β = 1 to β > 0). (i) D = 1 implies P (X + Y > ct|X + Y > c) −→ t =: F0 (t),

c ↑ 0,

uniformly for t ∈ [0, 1], (ii) D = 1 and β > 0 implies P (X + Y > ct|X + Y > c) → t1+β =: Fβ (t), uniformly for t ∈ [0, 1] provided that (2 + β) A(z) dz − A(0) − A(1) = 0.

c ↑ 0,

(13.34)

13.3. About Tail Independence

329

Condition (13.34) is satisﬁed, e.g., for normal and Morgenstern dfs. This condition is not satisﬁed for the bivariate generalized Pareto df, special considerations are required in this case (for a discussion see Falk et al. [16] and the above mentioned article by Frick et al.). This result will be applied to the testing of tail dependence based on the radial component.

Selection of the Null–Hypothesis We continue our discussion on page 293 about the selection of the model: “before using a more complex model, one should check whether the EV model for independent margins or a related generalized Pareto model is applicable.” Therefore, we wish to check whether the more complex model with unknown Pickands dependence function D can be replaced by the simpler one where D = 1. About the selection of the hypotheses, there is a well–known general advice (e.g., in the booklet by J. Pfanzagl15, page 95, translated from German): “As null–hypothesis select the opposite of that you want to prove and try to reject the null–hypothesis.” In our special case we want to prove the tail independence and, therefore, take tail dependence as the null–hypothesis. We are well aware that statisticians often do not follow this advice primarily due to technical reasons.

Testing Tail Dependence Against Tail Independence We are testing a simple null–hypothesis H0 , representing dependence, against a composite alternative H1 , representing the various degrees of independence. For that purpose we merely have to deal with the asymptotic conditional distributions of the test statistic X + Y . We are testing H0 : F0 (t) = t

against H1 : Fβ (t) = t1+β , β > 0,

based on the the radial components Ci = (Xi + Yi )/c,

i = 1, . . . , n,

with Ci < 1, i = 1, . . . , n. The testing procedure is carried out conditioned on the random sample size of exceedances, see page 234. Denote by C˜i , i = 1, . . . , m, the iid random variables in the conditional set–up. The Neyman–Pearson test at the level α for testing F0 against the ﬁxed alternative Fβ is independent of the parameter β > 0. Notice that this test is based on the densities fβ (t) = (1 + β)tβ , 0 ≤ t ≤ 1. Therefore, one gets a uniformly most powerful test for the testing against the composite alternative. 15 Pfanzagl,

Berlin.

J. (1974). Allgemeine Methodenlehre der Statistik II. Walter de Gruyter,

330

13. Multivariate Peaks Over Threshold

For iid random variables C˜i , i = 1, . . . , m, with common df F0 , the Neyman– m Pearson test statistic i=1 log C˜i is distributed according to the gamma df Hm (t) = exp(t)

m−1

i=0

(−t)i , i!

t ≤ 0,

on the negative half–line with parameter m. Therefore, the Neyman–Pearson test at the level α is given by the critical region , +m

−1 Cm,α = log C˜i > H (1 − α) . m

i=1

In the aforementioned article by Frick et al. one may also ﬁnd a bias–corrected MLE for β.

Power Functions and P –Values Evaluating P (Cm,α ) under iid random variables Zi , which are distributed according to Fβ , one gets the power function −1 (1 − α) , β ≥ 0, ζm,α (β) = 1 − Hm (1 + β)Hm for the level–α–test. The p–value of the optimal test, ﬁnally, is given by m m

˜i + m i=1 log c , p(˜ c ) = 1 − Hm log c˜i ≈ Φ − m1/2 i=1

(13.35)

˜ = (˜ with c c1 , · · · , c˜m ), according to the central limit theorem. One may also derive an approximate representation of the power function by ζm,α (β) ≈ 1 − Φ((1 + β)Φ−1 (1 − α) − βm1/2 ). Particularly, for m = 361 and α = 0.01 we have ζ361,0.01 (β) = 1 − Φ((1 + β)Φ−1 (0.99) − 19β). This function together with some other power functions is displayed in Figure 13.7.

Data Transformation Real data (v1 , w1 ), . . . , (vn , wn ) are independent realizations of a random vector (V, W ) with common unknown df. These pairs have to be transformed to the left

331

0.8 0.6

0.0

0.2

0.4

ζ361,0.05(β)

0.6 0.4 0.2

ζ361,0.01(β)

0.8

1.0

1.0

13.3. About Tail Independence

0.0

0.1

0.2

0.3

0.4

0.5

0.0

0.1

0.2

0.5

0.3

0.4

0.5

1.0 0.8 0.6 0.0

0.2

0.4

ζ434,0.01(β)

0.8 0.6 0.4 0.0

0.2

ζ290,0.01(β)

0.4

β

1.0

β

0.3

0.0

0.1

0.2

0.3

0.4

0.5

0.0

β

0.1

0.2 β

Fig. 13.7. Power functions for m = 361 and α = 0.01, 0.05 (above), and m = 290, 434 and α = 0.01 (below).

lower quadrant to make the preceding test procedure applicable. Such a transformation can be achieved as explained in Section 10.3. Subsequently, we make use of transformations by means of the sample dfs Fn (v; ·) and Fn (w; ·) in the single components. We have xi = Fn (v; vi )

and

yi = Fn (w; wi ),

i = 1, . . . , n.

Recall that the resulting data are relative ranks with values in the interval [0, 1] or (0, 1) if the ranks are divided by n + 1 in place of n. Then the data are shifted to (−1, 0). This procedure is illustrated in the following example. Example 13.3.6. (Wave and Surge Heights at Newlyn, England.) The wave and surge data set was originally recorded by Coles and Tawn. It consists of 2, 894 three–hourly– measurements of the surge and wave heights taken at Newlyn, a coastal town in England. Ledford and Tawn as well as Coles et al. have already analyzed the dependence structure of these data with the motivation that ﬂooding is likely if both surge and wave heights reach extreme levels.

332

13. Multivariate Peaks Over Threshold

Now we are going to test the extremal dependence of the two components by applying the uniformly most powerful test. In a ﬁrst step the marginal data are transformed by means of the marginal univariate empirical dfs. Then they are shifted from (0, 1) × (0, 1) to (−1, 0) × (−1, 0). The data set in its original form and after transformation to (0, 1)– uniformly distributed margins is displayed in Figure 13.8.

Fig. 13.8. Wave heights and surge levels at Newlyn: original data (left) and transformed data set with [0, 1]–uniformly distributed margins (right)

Testing the Tail Dependence for the Wave and Surge Heights Next we proceed as in Falk et al. [17], page 189: ﬁx c < 0 and consider those observations xi +yi exceeding the threshold c. These data are subsequently denoted by c1 , . . . , cm . The threshold c is chosen in such a way that the number m of exceedances is about 10% to 15% of the total number n = 2, 894. Therefore, we take values c from −0.46 to −0.35. It may be worthwhile to investigate more closely the impact of the threshold c on the performance of the test. Figure 13.9 shows the transformed full data set and the part near zero together with threshold lines.

Fig. 13.9. The transformed full data set, shifted to the negative quadrant (left) and data above the threshold lines corresponding to c = −0.46 and c = −0.35 (right).

13.4. The Point Process Approach to the Multivariate POT Method

333

We assume that our results are applicable to the ci /c, i = 1, . . . , m. Substituting the xi in (13.35) by ci /c, i = 1, . . . , m, one gets approximate p–values. Table 1 provides some examples of p–values for diﬀerent thresholds c together with the number m of exceedances. Table 13.1. p–values for diﬀerent thresholds c. c

−0.46

−0.45

−0.44

−0.43

−0.42

−0.41

m

431

414

400

390

376

361

p–value

0.00028

0.00085

0.00158

0.00162

0.00305

0.00665

c

−0.4

−0.39

−0.38

−0.37

−0.36

−0.35

m

353

338

325

313

300

294

p–value

0.00542

0.01179

0.01939

0.02816

0.04601

0.03291

Having in mind a signiﬁcance level of α = 0.01 the null–hypothesis is accepted for the bigger values of c, up from −0.39. For lower thresholds the p–values are rather low, suggesting a rejection of the null–hypothesis. Remembering that we are considering limiting distributions as c ↑ 0 we may nevertheless decide to accept the null–hypothesis entailing the acception of an extremal tail–dependence. Yet we have to be aware that this conclusion is not straightforward and we must not ignore that the null–hypothesis is always rejected if we choose a signiﬁcance level of α = 0.05, for example.

13.4

The Point Process Approach to the Multivariate POT Method

We shortly introduce the point process models related to the multivariate GP models and possible estimation procedures within such models.

The Models We shortly describe the relationship between • the original statistical modeling by means of iid random vectors (Xi , Yi ), i = 1, . . . , n, with common bivariate df F , & as introduced in (13.5). • the model determined by bivariate GP dfs W Let (xi , yi ), i = 1, . . . , n, be generated according to F . Let (xi , yi ), i = 1, . . . , k, be those (xi , yi ) for which either xi > u or yi > v (taken in the original order of the outcome). Let

(˜ xi , y˜i ) := m(u,v) (xi , yi ) = max(xi , u), max(yi , v)

334

13. Multivariate Peaks Over Threshold

be the vectors introduced in (13.4). Within a certain error bound (see [16], Section 5.1), the (˜ xi , y˜i ) can be regarded as realizations of random vectors i , Y i ), (X

i = 1, . . . , K(n),

(13.36)

where 1 , Y 1 ), (X 2 , Y 2 ), (X 3 , Y 3 ), . . . are iid random vectors with common GP df • (X & W (x, y) in the form described in (13.5), • K(n) is a binomial or a Poisson random variable which is independent of the i , Y i ). (X Thus, the series of random vectors in (13.36) constitute a binomial or a Poisson process depending on the choice of K(n).

Estimation in Point Process Models Of course, ﬁrst of all one may also use the estimators presented before within the point process framework. The ML approach was applied, for example, by Davison and Smith in the article mentioned on page 121. To compute the likelihood function specify densities of point processes as it was done in Section 9.3 (also see Section 9.5) with the help of results in [43], Section 3.1.

Part IV

Topics in Hydrology and Environmental Sciences

Chapter 14

Flood Frequency Analysis co–authored by J.R.M. Hosking1

We ﬁrst summarize and supplement in Section 14.1 the at–site analysis done before in conjunction with annual ﬂood series. Section 14.2 deals with the partial duration series of daily discharges. Our program was already outlined in Section 2.5, namely we want to handle the serial correlation and seasonal variation in the data. Our primary interest still concerns the calculation of the T –year threshold, yet also brieﬂy discuss the question of seasonal variation in its own right. To catch the seasonal variation of discharges over a higher level, we introduce inhomogeneous Poisson processes with marks which distributionally depend on the time of their occurrence (Section 14.2). The handling of such partial duration series is the main topic of this chapter. A trend is included in Section 14.3. In Sections 14.3–14.5, we also deal with the regional ﬂood frequency analysis Our primary references are the paper by Hosking et al., cf. page 120, and the book [29].

14.1

Analyzing Annual Flood Series

The traditional approach of dealing with ﬂoods is to use annual maxima. On the one hand, one is avoiding the problems of serial correlation and seasonal variation; on the other hand, one is losing information contained in the data. A ﬁrst modiﬁcation of this approach is to base the inference on seasonal or monthly maxima. 1 IBM

edition.

Research Division, Thomas J. Watson Research Center; co–authored the 2nd

338

14. Flood Frequency Analysis

In Section 4.3 we introduced several distributions, such as Wakeby, two– component and gamma distributions, which are used in the hydrological literature besides EV distributions for the modeling of annual or seasonal ﬂoods. In this chapter, we only employ EV distributions.

Estimation of the T –Year Flood Level Based on Annual Maxima We repeat the analysis of annual ﬂoods as it was already done for the Feather River discharges, see Examples 4.1.1 and 5.1.1. We computed 50 and 100–year discharge levels based on the estimated Gumbel (EV0) and exponential (GP0) distributions. To make the results in this and the subsequent section comparable, we repeat the aforementioned analysis with respect to the Moselle River data. Example 14.1.1. (Continuation of Example 2.5.2 about the Moselle River Data.) The MLE(EV) will be applied to the annual maximum levels for water years running from Nov. to Oct. of consecutive calendar years. Based on 31 annual maxima one obtains the parameters γ = −0.40, µ = 8.00 and σ = 1.74. Moreover, the right endpoint of the estimated Weibull distribution is 12.37. The 50 and 100–year levels are u(50) = 11.45 and u(100) = 11.67. According to these estimates, there was a 100–year ﬂood, with a level of 11.73 meters, around Christmas time in the year 1993.

In view of the small number of data, we do not carry out a tail estimation for the Moselle River within a GP model based on exceedances over a certain level.

Modiﬁcations of the Annual Maxima Approach If the number of years is small, there is a greater need to extract more information out of a sample of daily recorded discharges or water levels. The number of extreme data can be increased by extracting monthly or seasonal maxima for the statistical analysis, where independence may still be assumed, yet one is exposed to the seasonal variation. We do not go into details but concentrate our attention to the partial duration approach which will be outlined in the next section.

14.2

Analyzing Partial Duration Series

Series of ﬂood peaks are investigated under the fairly general conditions that the frequency of occurrence and the magnitude of ﬂoods exhibit a seasonal dependency.

Modeling by an Inhomogeneous Poisson Process After a declustering of the data, the modeling • of frequencies by means of an inhomogeneous Poisson process, and

14.2. Analyzing Partial Duration Series

339

• of the magnitudes by stochastically independent, time–dependent marks is adequate. Subsequently, we use a nonparametric approach with the exception that the marks are assumed to be distributed according to generalized Pareto (GP) dfs. A parametric modeling for the marginal distributions of the marks is indispensable when the usual extrapolation to extraordinary high ﬂood levels must be carried out. We model the frequencies and the marks by means of an inhomogeneous Poisson process in the time scale with mean value function Λ, and marks with dfs F (·|ti ) at time ti . This constitutes a Poisson(Λ, F ), cf. Section 9.5. The ﬂood peaks are those marks exceeding a threshold v. According to (9.31) and (9.32) this situation is described by a Poisson(Λv , F [v] ) with mean value function t (1 − F (v|s)) dΛ(s) (14.1) Λv (t) = 0

in the time scale, and marks distributed according to

1 − F (v|t) , F [v] (w|t) = F (w|t) − F (v|t)

w ≥ v.

(14.2)

The T –Year Flood Level We extend the computations on page 252 concerning the T –year return level to the new framework. (14.1) and (14.2) yield that the ﬁrst exceedance time with respect to the threshold v is the random variable τ1,v = Λ−1 v (X), where X is a standard exponential random variable. Hence, the T –year return level is the solution to the equation (14.3) E(τ1,v ) = T. An estimate of the T –year return level is obtained by plugging in estimates of the mean value function Λ and of the conditional df F = F (·|·). Subsequently, we assume that there is only a seasonal dependence of F (·|s) and Λ(s). Then, according to (14.1), 1 (1 − F (v|s)) dΛ(s) =: T ψ(v), T = 1, 2, 3, . . . . (14.4) Λv (T ) = T 0

When the inhomogeneous mean value functions Λv (t) are replaced by the homo v (t) = tψ(v), then ψ(v) is the intensity in the time geneous mean value functions Λ domain, and the ﬁrst exceedance time is an exponential random variable with expectation 1/ψ(v), see Section 9.2 for details. This expectation is equal to T , if T ψ(v) = 1.

(14.5)

Therefore, one obtains a T –year return level v˜(T ) as a solution to this equation. This T –year return level may serve as an approximation to the one in the original setting.

340

14. Flood Frequency Analysis

We also give an alternative interpretation of v˜(T ): let Nv be the inhomogeneous Poisson counting process with mean value function Λv . Because

v˜(T ) (T ) = E Nv˜(T ) (T ) 1 = T ψ(v) = Λ (14.6) we know that v˜(T ) is the threshold so that the mean number of exceedances up to time T is equal to 1, also see page 12.

Estimation of the T –Year Level Let l be the number of years for which the ﬂood measurements are available. Let again N (t), t ≤ l, be the counting process pertaining to the exceedance times τi , i ≤ N (l), of exceedances over u. It is apparent that l−1

1 N (j + s) − N (j) , Nl (s) = l j=0

0 ≤ s ≤ 1,

is an unbiased estimator of Λ(s) for 0 ≤ s ≤ 1. Plugging in Nl for Λ in ψ(v) = 1 0 (1 − F (v|s)) dΛ(s) one obtains by 0

=

1 1 − F (v| j(i) + ηi ) l

=

1 1 − F (v|ηi ) l

1

(1 − F (v|s)) dNl (s)

i≤N (l)

i≤N (l)

an estimator of ψ(v), where j(i) + ηi = τi . Thus, we have ηi = τi modulo 1. Next, F (·|ηi ) will be replaced by a generalized Pareto (GP) df W . The ﬁnal estimator of ψ(v) is given by

1 1 − Wγˆ (ηi ),u,ˆσ(ηi ) (v) , ψ(v) = l

(14.7)

i≤N (l)

ˆ (ηi ) of the shape and scale parameters are conwhere the estimators γˆ (ηi ) and σ structed in the following manner: let Xj be the mark pertaining to the time τj (and, thus, pertaining to ηj ). Then, these estimators are based on those Xj for which |ηj − ηi | ≤ b, where b > 0 is a predetermined bandwidth. Alternatively, one may employ a nearest neighbor method, that is, take the marks Xj pertaining to the k values ηj closest to ηi , where k is predetermined (see Section 8.2). Then, an estimator vˆ(T ) of the T –year level is obtained as the solution to T ψ(v) = 1.

(14.8)

One gets again the estimator in the homogeneous case (see page 252) if the parameters are independent of the time scale.

14.2. Analyzing Partial Duration Series

341

frequency of exceedances

Example 14.2.1. (Continuation of Example 13.1.1 about the Moselle River Data.) After taking the exceedances over a base level u = 5 and the selection of cluster maxima (with run length r = 7) there are 131 observations within the 31 water years (starting in November). In the hydrological literature, it is suggested to take a base level and clusters such that there are three cluster maxima for each year on the average. Thus, we took a slightly greater number of exceedances. In Fig. 14.1 (left), the exceedances are plotted against the day of occurrence within the water year. As one could expect the exceedances primarily occur in winter and spring time. It is remarkable that higher ﬂood levels also occur in times with a lower ﬂood frequency.

exceedances

10

10

5

5 0

200

day in water year

20

40

week in water year

Fig. 14.1. (left.) Scatterplot of cluster maxima over u = 5 at days modulo 365. (right.) Frequency of exceedances within weeks modulo 52. We also included a histogram of the frequencies plotted against the week of occurrence within the water year (Fig. 14.1 (right)). The GP parameters γ(i) and σ(i) of the ﬂood magnitudes are estimated by means of the MLE(GP) using the nearest neighbor approach with k = 30. The use of the Moment(GP) estimator would lead to a similar result. In Fig. 14.2, plots of the estimates are provided for all days within the water year where an exceedance occurred. This is our interpretation: the estimates reﬂect to some extent what can also be seen in the scatterplot (Fig. 14.1 (left)). In winter time the cluster maxima are relatively homogeneously scattered within the range between 5 and 12, whereas in spring time very high ﬂoods are rare events. In the ﬁrst case, the wide range is captured by the larger scale parameter, whereas the latter phenomenon is captured by the positive shape parameter. Based on Monte Carlo simulations we obtain 12.1 meter as an estimate of the 100–year threshold. Applying the Moment(GP) estimator one obtains higher T –year thresholds than for the MLE(GP).

Statistical inference for such series (particularly, the estimation of the T –year level) was carried out in the hydrological literature • within the reduced setting of stationarity within certain seasons2, 2 Ashkar,

F. and Rousselle, J. (1981). Design discharge as a random variable: a risk

342

14. Flood Frequency Analysis 0.3

scale parameter

shape parameter

4 200

2

-1

200

day in water year

day in water year

Fig. 14.2. Estimated shape parameters γ(i) (left–hand side) and scale parameters σ(i) (right–hand side) at days i.

• for a certain continuous modeling with trigonometric functions3 . Moreover, it was assumed that the marks (the ﬂood magnitudes) are exponentially distributed. For further explanations and references see Davison and Smith (cited on page 121), where also a decision is made for the exponential model according to a likelihood ratio test. We believe that for our example of Moselle data the GP modeling is adequate.

Flood Series with a Trend The estimated T –year level may drastically increase in the presence of a slight trend. If a linear trend is included in the modeling, then much higher T –year levels were estimated for the Moselle river data4 . We also refer to articles by R.L. Smith5 and by H. Rootz´en and N. Tajvidi6 . study. Water Resour. Res. 17, 577–591. Rasmussen, P.F. and Rosbjerg, D. (1991). Prediction uncertainty in seasonal partial duration series. Water Resour. Res. 27, 2875–2883. 3 North,

M. (1980). Time–dependent stochastic model of ﬂoods. J. Hydraul. Div. Am. Soc. Civ. Eng. 106, 649–665. Nachtnebel, H.P. and Konecny, F. (1987). Risk analysis and time–dependent ﬂood models. J. Hydrol. 91, 295–318. 4 Reiss, R.–D. and Thomas, M. (2000). Extreme environmental data with a trend and a seasonal component. In: Environmental Engineering and Health Sciences (ed. J.A. Raynal et al.), 41–49, Water Resources Publications, Englewood. 5 Smith, L.R. (1989). Extreme value analysis of environmental time series: an application to trend detection in round–level ozone. Statistical Science 4, 367–381. 6 Rootz´ en,

H. and Tajvidi, N. (1997). Extreme value statistics and wind storm losses: a case study. Scand. Actuarial. J., 70–94.

14.3. Regional Flood Frequency Analysis

14.3

343

Regional Flood Frequency Analysis

We argued that the use of a partial duration series in place of an annual ﬂood series is necessary to extract more information out of the available data. Another possibility is to include information from data recorded at nearby sites, respectively, sites having similar characteristics.

Regional Estimation of Parameters In the regional analysis it is assumed that data are available at diﬀerent sites with data xj,i at site j. We deal with data yj,i which are • annual maxima, or • excesses (exceedances) over a threshold uj . Subsequently, we primarily address the case of excesses. Assume that the random excesses at site j are distributed according to the GP df Wγ,0,σj . Apparently this is the situation, where the accesses have a common shape parameter γ, yet the scale parameters are diﬀerent from each other. If γˆj is an estimate of γ at site j, then γˆ R =

j

nj γˆj

nj

(14.9)

j

is a regional estimate of γ, where the nj are the sample sizes (number of excesses over the threshold uj ) at site j (cf. [29], page 7, where further references to the literature are provided). If the nj are of a similar size, then a pooling of the data is appropriate. An important question is the selection • of the homogeneous region, that is, those sites which can be modeled by the same shape parameter, • of an appropriate submodel of GP distributions.

The Index Flood Procedure We introduce a special at–site estimation procedure which is also useful in conjunction with regional considerations. Suppose that the excesses Yi of discharges over the threshold u are distributed according to a GP df Wγ,0,σ with shape and scale parameters γ and σ. Recall from (1.57) that Yi has the expectation m = σ/(1 − γ),

344

14. Flood Frequency Analysis

which is the index ﬂood, under the condition γ < 1. Under this condition, the statistical inference is done within a certain submodel of GP dfs, where dfs with a very heavy upper tail are excluded. The rescaled excesses Yi /m = Yi (1 − γ)/σ have means equal to 1 and are distributed according to the GP df ⎧ ⎪ ⎪ 0 < z, 0 ≤ γ < 1, ⎪ ⎨ −1/γ γ for z Wγ,0,1−γ (z) = 1 − 1 + if ⎪ 1−γ ⎪ ⎪ ⎩ 0 < z < 1−γ , γ < 0; |γ| (14.10) with density ⎧ ⎪ ⎪ 0 < z, 0 ≤ γ < 1, ⎪ ⎨ −(1+1/γ) γ 1 1+ z for wγ,0,1−γ (z) = if ⎪ 1−γ 1−γ ⎪ ⎪ ⎩ 0 < z < 1−γ , γ < 0. |γ| (14.11) The unknown parameter γ < 1 may be estimated, for example, by the ML estimator γˆ in this submodel of GP dfs (using the Newton–Raphson iteration procedure). Within the original model of GP dfs with shape parameter γ < 1 and scale parameter σ > 0 one gets the following two–step estimation procedure: let yi be a realization of Yi and denote again by y¯ the sample mean of the yi . Then, the excess degrees yi zi = y¯ may be regarded as realizations under the GP df Wγ,0,1−γ as given in (14.10). Let γˆ be the ML estimate (or any other estimate) of γ within the model of GP dfs Wγ,0,1−γ : γ < 1 based on the excess degrees zi . Because y¯ is an estimate of the mean m = σ/(1−γ), it is apparent that σ ˆ = (1 − γˆ )¯ y is an estimate of the original scale parameter σ > 0.

The Sample Median Taken as Index Flood If one takes the median in place of the mean, then the rescaled excesses have medians equal to 1 and are distributed according to a GP df γ = 0,

W0,0,1/ log 2 if W

γ,0,γ/(2γ −1)

γ = 0.

14.4. The L–Moment Estimation Method

345

For estimating the parameters γ and σ > 0 in the GP model of dfs Wγ,0,σ —without any restriction on the shape parameter γ—we use excess degrees with the sample mean replaced by the sample median.

Regional Estimation Using the Index Flood Procedure Let again yj,i be the discharge excesses over a threshold uj at site j which are governed by a GP df Wγ,0,σj . Rescaling the GP dfs by the means mj = σj /(1 − γ) as in the preceding lines, we obtain the common regional frequency distribution Fγ = Wγ,0,1−γ . Recall that mj is the index ﬂood for the site j. Notice that Fγ,mj (y) = Fγ (y/mj ) = Wγ,0,σj (y) and, therefore, the index ﬂood mj is a scale parameter for the model of regional frequency distributions. Let again yj,i zj,i = y¯j be the excess degrees at site j, where y¯j is the sample mean of the excesses yj,i at site j. Now, use the at–site estimates γˆj of γ to deﬁne the regional estimate γˆ R in (14.9). In addition, yj σ ˆj = (1 − γˆ )¯ is an estimate of the original scale parameter σj = (1 − γ)mj .

Estimation of the T –Year Flood Level At a given site, the T –year ﬂood level may be estimated as in (14.7) and (14.8) with γˆ and γˆ (ηi ) replaced by the corresponding regional estimates γˆ R and γˆ R (ηi ).

14.4

The L–Moment Estimation Method

We give a short introduction to L–moments and the L–moment estimation method following closely the explanations in the book by Hosking and Wallis [29] about regional frequency analysis. L–moment estimators are obtained by equating sample L–moments with the pertaining L–moments corresponding to the procedure for ordinary moments, see page 86. As an application, L–moment estimators are dealt with under the Paretian modeling. L–moment estimators are extensively applied in ﬂood frequency in conjunction with the index ﬂood procedure analysis due to their appealing small sample performance.

346

14. Flood Frequency Analysis

L–Moments Recall from (1.33) that the ordinary jth moment is deﬁned by 1 −1 j mj = xj dF (x) = F (u) du,

(14.12)

0

where the latter equality is a consequence of the quantile transformation, cf. page 38, and the transformation theorem for integrals. The right–hand expressions will be replaced by certain probability weighted moments 1

βr =

F −1 (u)ur du

(14.13)

0

for r = 0, 1, 2, . . . . Notice that β0 is the mean m1 . Likewise, one could start with 1 βr replaced by αr = 0 F −1 (u)(1 − u)r du. The next step corresponds to the step from moments to centered moments to some extent. The ﬁrst L–moment λ1 is the mean, the second L–moment λ2 corresponds to the standard deviation, and for j ≥ 3 the jth L–moment is related to the jth central moment. More precisely, let λ1

= β0

λ2 λ3

= 2β1 − β0 = 6β2 − 6β1 + β0

λ4

= 20β3 − 30β2 + 12β1 − β0

and, in general, λj =

0

1

F −1 (u)Pj−1 (u) du =

j−1

pj−1,k βk ,

(14.14)

k=0

where Pr (u) =

r

pr,k uk

k=0

are Legendre polynomials of degree r shifted

to the interval [0, 1] with the coeﬃcients pr,k = (−1)r−k (r + k)! (k!)2 (r − k)! for r = 0, 1, 2, . . . . It is evident that all L–moments exist if the mean exists. 1 We have P0 (x) = 1, Pr (1) = 1 and 0 Pr (u)Ps (u) du = 0 for r = s. In 1 particular, 0 Pr (u) du = 0 for r ≥ 1 which yields that L–moments are independent of a location parameter for j ≥ 1. The representations

λ2 = E X2:2 − X1:2 2

3 λ3 = E X3:3 − X2:3 − X2:3 − X1:3

4 λ4 = E X4:4 − X1:4 − 3 X3:4 − X2:4

14.4. The L–Moment Estimation Method

347

reveal why L–moments exhibit characteristics of the distribution just as the standard deviation and the 3rd and 4th centered moments. Also deﬁne the L–CV, the L–moment analogue of the coeﬃcient of variation, by τ = λ2 /λ1 (14.15) and the L–moment ratios τj = λj /λ2

(14.16)

with the L–skewness and the L–kurtosis as special cases for j = 3, 4. Notice that the L–CV is independent of a scale parameter, and the L–moment ratios are independent of location and scale parameters.

Sample L–Moments One gets estimates of βr for r = 0, 1, 2, . . . by replacing the qf F −1 in (14.13) by the sample qf Fn−1 as deﬁned in (2.8). A slight modiﬁcation leads to estimates 1 k r xk:n . β˜r = n n+1 k≤n

Yet, unbiased estimators are obtained by using another modiﬁcation, namely 1

xk:n , n n

βˆ0 βˆ1

= =

1 n

k=1 n

k=2

k−1 xk:n , n−1

and, in general, n 1 (k − 1) · · · (k − r) xk:n . βˆr = n (n − 1) · · · (n − r) k=r+1

ˆ j of the L–moment λj are obtained by replacing the Unbiased estimates λ probability weighted moments βk in (14.14) by the sample versions βˆk . We have ˆj = λ

j−1

pj−1,k βˆk ,

(14.17)

k=0

ˆ 1 is the sample mean x ¯. where, particularly, the ﬁrst sample L–moment λ ˆ j /λ ˆ2 In this manner, on may also deﬁne the sample L–moment ratios τˆj = λ ˆ ˆ and the sample L–coeﬃcient of variation τˆ = λ2 /λ1 .

348

14. Flood Frequency Analysis

L–Moment Estimation in the Pareto Model We apply the L–moment estimation method • to the Pareto model for excesses with unknown scale and shape parameters σ and γ, • to the reduced Pareto model in (14.10) for excess degrees in conjunction with the index ﬂood procedure. It turns out that both approaches are equivalent. The ﬁrst two L–moments of a Pareto df Wγ,u,σ are λ1

= u + σ/(1 − γ),

λ2

= σ/((1 − γ)(2 − γ)),

for γ < 1. Notice that u = 0, if we deal with excesses yi . L–moments estimates of the parameters γ and σ are solutions to ˆ 1 (y) = λ ˆ 2 (y) = λ

u + σ/(1 − γ), σ/((1 − γ)(2 − γ)),

ˆ j (y) are the sample L–moments based on the excesses yi . The solutions where λ are γˆ (y) σ ˆ (y)

ˆ 2 (y), = 2 − y¯/λ = (1 − γˆ (y))¯ y.

(14.18)

Within the model (14.10) for excess degrees we base the estimation of γ on the 2nd L–moment λ2 . One gets the estimate ˆ 2 (z), γ˜ (z) = 2 − 1/λ y. It is apparent that where z is the sample of excess degrees zi = yi /¯ γ˜(z) = γˆ (y)

(14.19)

and, therefore, the L–moment method applied to the excesses yi and, respectively, the index ﬂood procedure in conjunction with the L–moment method applied to the excess degrees zi leads to the same estimates of σ and γ within the Pareto model for excesses. Simulations show that the L–moment estimator of γ has a better performance than the MLE in the model (14.10) for small and moderate sample sizes, if γ is around zero.

14.5. A Bayesian Approach to Regional Estimation

349

L–Moment Estimation in the Extreme Value Model The ﬁrst two L–moments and the L–skewness parameter of the EV df Gγ,µ,σ are λ1

=

λ2

=

τ3

=

If γ is known, then

µ − σ(1 − Γ(1 − γ))/γ,

−σ 1 − 2γ Γ(1 − γ)/γ,

2 1 − 3γ / 1 − 2γ − 3 .

(14.20)

−λ2 γ

, σ= 1 − 2γ Γ(1 − γ)

(14.21)

µ = λ1 + σ(1 − Γ(1 − γ))/γ .

(14.22)

and Thus, to get the L–moment estimates of γ, µ, σ, replace λ1 , λ2 , τ3 by the sample versions and compute a numerical solution to the third equation in (14.20).

14.5

A Bayesian Approach to Regional Estimation

In this section we give an outline of an approach to regional ﬂood frequency analysis which originates in a paper by G. Kuczera7.

A Bayesian At–Site Analysis Assume that the annual ﬂoods at a given site are distributed with common log– normal df F(µ,σ) (x) = Φµ,σ (log(x)) as deﬁned in (1.60), where Φµ,σ is the normal df with location and scale parameters µ and σ > 0. For such a distribution, the T –year ﬂood (T –year level) is u(T ) = =

−1 (1 − 1/T ) F(µ,σ)

exp µ + σΦ−1 (1 − 1/T ) .

(14.23)

The estimation of u(T ) will be carried out in the normal model. If z1 , . . . , zn are the annual ﬂoods then—according to the deﬁnition of the log–normal df—the transformed data yi = log(zi ) are governed by the normal df Φµ,σ . The T –year ﬂood u(T ) will be estimated by replacing in (14.23) the parameters µ and σ by the sample mean y¯ and a Bayesian estimate of σ 2 based on y = (y1 , . . . , yn ). In the sequel, the normal dfs are represented by the variance ϑ = σ 2 and the unknown mean µ is replaced by the sample mean y¯. The latter corresponds to 7 Kuczera,

G. (1982). Combining site–speciﬁc and regional information: an empirical Bayes approach. Water Resour. Res. 18, 306–314.

350

14. Flood Frequency Analysis

taking a non–informative prior for µ. For the Bayesian estimation of ϑ we take a reciprocal gamma density pa,b (ϑ) =

1 (ϑ/b)−(1+a) exp(−b/ϑ), bΓ(a)

ϑ > 0,

as a prior for ϑ, see (3.43). Such densities are conjugate priors for ϑ. The posterior density is pa,b (ϑ|y) = pa ,b (ϑ) with

a = a + n/2

and

b = b + ns2 /2,

where s2 = (1/n) i≤n (yi − y¯)2 . The Bayesian estimate of ϑ = σ 2 —as the mean of the posterior distribution— is b + ns2 /2 . (14.24) σ ˆ2 = a + n/2 − 1 Therefore, one gets

u ˆ(T ) = exp y¯ + σ ˆ Φ−1 (1 − 1/T )

as an estimate of the T –year ﬂood u(T ).

Regional Moment Estimation of the Superparameters Next, we assume that data sets of size nj are recorded at k diﬀerent sites. We want to use the regional information to estimate the superparameters a and b. Let ϑˆj be estimates of the unknown parameter ϑj at site j. From the Bayesian viewpoint (see page 243), the parameter ϑj was generated under a prior density pa,b which is the density of a random parameter θ. One may also regard the estimates ϑˆj as realizations under pa,b . It remains to estimate the superparameters a and b from ϑˆj , j = 1, . . . , k. This will be exempliﬁed by applying the moment estimation method (see page 86) to the model of reciprocal gamma distributions. Because the mean and the variance of the reciprocal gamma

distribution are given by m(a, b) = b/(a − 1) and var(a, b) = b2 / (a − 1)2 (a − 2) (see page 104) we have b = (a − 1)m(a, b) and

a = 2 + m(a, b)2 /var(a, b)

for a > 2. Replacing m(a, b) and var(a, b) by the sample versions based on the ϑˆj , j = 1, . . . , k, one gets estimates a ˆk and ˆbk of the superparameters a and b. This leads to a new estimator in (14.24) and a regional estimate of the T –year ﬂood.

14.5. A Bayesian Approach to Regional Estimation

351

Reﬁned Regional Approach It is more realistic to assume that the random parameters θj at sites j are not identically distributed. Suppose that θj = x j β + ε j ,

(14.25)

where xj represents the known characteristics at site j and the εj are residuals. Thus, the prior distribution at site j has the parameters a(xj ) and b(xj ). In addition, let the estimates at sites j have the representations

which yields that

ϑˆj = ϑj + ηj

(14.26)

ϑˆj = xj β + εj + ηj .

(14.27)

Within this multiple, linear regression problem one may get estimates of the mean and the variance of the prior distribution at site j and, therefore, of the superparameters a(xj ) and b(xj ) by using again the moment estimation method.

Further Applications of Empirical Bayes Estimation in Regional Analysis The Bayesian argument in Kuczera’s article was taken up by H.D. Fill and J.R. Stedinger8 to justify forming a linear combination of two estimators with weights inversely proportional to the estimators variance. This is done within the annual maxima framework. In this context, we also mention an article by H. Madsen and D. Rosbjerg9 who apply the regression technique in conjunction with empirical Bayes estimation to regional partial duration series. Both articles contain exhaustive lists of relevant articles.

8 Fill,

H.D. and Stedinger, J.R. (1998). Using regional regression within index ﬂood procedures and an empirical Bayesian estimator. J. Hydrology 210, 128–14. 9 Madsen,

D. and Rosbjerg, D. (1997). Generalized least squares and empirical Bayes estimation in regional partial duration series index–ﬂood modeling. Water Resour. Res. 33, 771–781.

Chapter 15

Environmental Sciences co–authored by R.W. Katz1

This chapter deals with the application of the statistics of extremes in the environmental sciences. Related chapters include those dealing with ﬂood frequency analysis in hydrology (Chapter 14) and large claims in the insurance industry (Chapter 16). Consideration of extreme events commonly arises in the regulatory process related to the environment, particularly the selection of thresholds which aid in determining compliance and eﬀectiveness. Statistical characteristics typical of environmental extremes include annual and diurnal cycles, as well as trends possibly attributable to anthropogenic activities. One commonly unappreciated aspect in extreme value analysis for environmental variables is the potential of making use of covariates, particularly geophysical variables. Their incorporation into the analysis makes the resultant models both more eﬃcient, e.g., in terms of quantile estimation, and more physically realistic. Another feature, beyond the scope of this treatment, is the spatial dependence of extremes typically exhibited by ﬁelds of environmental data.

15.1

Environmental Extremes

In much of the environmental sciences, particularly impact assessment, extreme events play an important role. For example, earthquakes (and related tsunamis), ﬁres, ﬂoods, or hurricanes can have devastating impacts, ranging from disturbances 1 Institute

for Study of Society and Environment, National Center for Atmospheric Research, Boulder, Colorado, USA. NCAR is sponsored by the National Science Foundation.

354

15. Environmental Sciences

in ecosystems to economic impacts on society as well as loss of life. Such features indicate that there should be plentiful applications of the statistics of extremes to the environmental sciences.

Environmental Policy and Regulation The implementation of environmental policy requires the development of regulations, such as the setting of standards for environmental variables by government agencies. In particular, these standards involve the selection of high (or low) thresholds, deﬁning an extreme event. These circumstances imply that extreme value analysis ought to be an integral part of this process. Such standards could involve statistics as simple as whether the annual maxima exceeds a high threshold, e.g., in the context of air pollution. Yet they sometimes involve much more intricate quantities, whose motivation from a purely statistical perspective is lacking; e.g., the ozone standard set by the U.S. Environmental Protection Agency is deﬁned in terms of the statistic, the daily average of the maximum of 8–hour running means, and is based on whether the fourth highest value of this quantity over a given year exceeds a threshold. The monitoring of environmental variables to detect any trend in extremes, possibly attributable to human activity, provides important information for policy makers. Speciﬁcally, possible shifts in the frequency and intensity of extreme weather and climate events are one of the primary concerns under global climate change as part of the enhanced greenhouse eﬀect.

Cycles That environmental variables often possess marked diurnal and annual cycles is well established. Consequently, it is commonplace for statistical models of environmental time series to include an annual (and/or diurnal) component for the mean (as well as sometimes for the standard deviation). Yet in the statistics of environmental extremes such cyclical behavior is usually neglected. Although not necessarily identical in form to that for the mean, cyclical behavior in extremes ought to be anticipated. It is an inherent aspect of the process by which environmental extremes arise, so that taking into account the cyclical modulation of extremal characteristics would be physically appealing.

Trends The monitoring and detection of trends in environmental extremes is important for a number of reasons. For one thing, any trends in extremes might serve as an early indicator of broader change, a catalyst for public policy intervention. In particular, it can be argued that the response of ecosystems is most sensitive to extreme events, not average conditions. On the other hand, it may be that regulations already have been imposed to “control” the environmental variable,

15.1. Environmental Extremes

355

with the hope of observing a diminished trend, i.e., as a measure of the eﬀectiveness of environmental regulation. Typically, trend analysis of environmental variables focuses on the mean (as well as occasionally on the standard deviation), not the extremes per se. Yet there is no inherent reason why the form of trend in extremes need be identical to that for the mean for an example in which there is a trend in the extremes, but apparently none in the mean, see the article by R.L. Smith cited on page 342). So, for completeness, any trend in extremes ought to be directly modeled.

Covariates Such cycles and trends can be incorporated into extreme value analysis as covariates, in the form of simple deterministic functions of time, e.g., a sum of sine waves. Still a noteworthy feature of environmental variables is the inﬂuence of covariates, especially those geophysical in nature, which are not simply deterministic functions, but rather random variables themselves. For example, air pollution concentration is eﬀected by the prevailing meteorological conditions. This feature is well appreciated for statistics like the mean level of an environmental time series. So it would be natural to anticipate that environmental extremes are likewise inﬂuenced by geophysical covariates. Yet it is less common to incorporate such covariates into environmental extreme value analysis, at least partly because of a lack of awareness by practitioners that this extension of extreme value analysis is feasible (a notable exception is the book by Coles [9], pages 107–114). In Chapters 8 and 9 we made some technical preparations. Not only would the introduction of covariates result in increased precision in estimating high quantiles, but it would serve to make the statistics of extremes more realistic from an environmental science perspective.

Tail Behavior The distribution of the impacts, in monetary terms, associated with extreme environmental events—e.g., a hurricane or a ﬂood—has a marked tendency to be heavy–tailed. Yet the distribution of the underlying geophysical phenomenon may not necessarily be heavy–tailed. Some geophysical variables, such as streamﬂow or precipitation, are clearly heavy–tailed; whereas others, such as wind speed or temperature, appear to have a light or bounded upper tail. Certain environmental variables, such as air pollution concentration, also do not appear to be heavy– tailed. Because of the complex coupling among these processes (i.e., geophysical, environmental, and economic impact), the determination of the origin of extremal behavior in environmental impacts is non–trivial. In particular, the extent to which this heavy–tailed behavior in environmental impacts is “inherited” from the tail behavior of underlying geophysical and/or environmental variables is unclear. Recalling the origin of the Pareto distribution as a model for the distribution of

356

15. Environmental Sciences

income or wealth, the heavy tail behavior of environmental impacts could well reﬂect primarily the aggregative nature of variables like income or wealth.

15.2

Inclusion of Covariates

In principle, the inclusion of covariates is feasible in any of the various approaches to extreme value analysis covered in this book, including both block maxima and peaks–over–threshold (pot). If the technique of maximum likelihood is adopted, then parameter estimation remains straightforward. Nevertheless, although the situation closely resembles that of generalized linear models [41], the well developed theory of estimation in that situation is not directly applicable. The extremal– based approach used here would not necessarily diﬀer much from ordinary least squares in terms of point estimates. But substantial discrepancies would be possible for standard errors (or conﬁdence intervals) for upper quantile estimators, particularly when dealing with a variable possessing a heavy–tailed distribution.

Block Maxima Consider the EV df Gγ,µ,σ as the approximate distribution for block maxima, say corresponding to a random variable Y with observed data y1 , . . . , yn (e.g., annual maximum of time series such as daily precipitation amount). Suppose that a covariate X is also available, say with observed data, x1 , . . . , xn , on the same time scale t = 1, . . . , n as the block maxima. Given a value of covariate, say X = x, the conditional distribution of the block maxima is assumed to remain the EV, but now with parameters that possibly depend on x. As an example, the location parameter µ and the logarithm of the scale parameter σ could be linear functions of x (applying the logarithmic transformation to preserve non–negativity of scale), whereas for simplicity the shape parameter γ might well be taken independent of the value x: γ(x) = γ, µ(x) = µ0 + µ1 x, log σ(x) = σ0 + σ1 x .

(15.1)

Here µ0 , µ1 , σ0 , σ1 and γ are unknown parameters to be estimated by maximum likelihood. Now the parameters of the EV df in (15.1) depend on a covariate which varies with time, writing γt = γ(xt ), µt = µ(xt ), and σt = σ(xt ). For technical details we refer to Section 8.4. This approach amounts to ﬁtting non–identical EV dfs, whereas the conventional diagnostic displays (e.g., Q–Q plots) are predicated upon identical distributions. This non–stationarity can be removed by using the relationship between an arbitrary EV df and the standard Gumbel, i.e., EV0 df. Namely, if Yt has an EV df with parameters γt , µt , and σt , then εt = (1/γt ) log(1 + γt (Yt − µt )/σt )

(15.2)

15.2. Inclusion of Covariates

357

has a G0,0,1 df (see Chapter 1). In practice, “residuals” can be obtained by substituting the time–dependent parameter estimates γˆt , µ ˆt , and σ ˆt , e.g., as in (15.1), along with the corresponding data (i.e., xt ’s), into (15.2). Then a Q–Q plot, for instance, can be constructed for a standard Gumbel distribution.

Peaks–Over–Threshold Approach The potential advantages of the pot approach over the block maxima approach become more readily apparent in the presence of covariates (for an early treatment of that question see the article by Davison and Smith, mentioned on page 121, in Section 3 about regression). For instance, allowing for an annual cycle in the block maxima approach would not even be feasible, except in an ad hoc and non– parsimonius manner such as taking block maxima over months or seasons. More generally, many physically–based covariates would naturally be measured on a time scale similar, if not identical, to that of the variables whose extremal behavior is being modeled (e.g., covariates such as pressure readings on a daily time scale in the case of modeling extreme high daily precipitation amounts). On the other hand, additional complications arise in the pot approach with covariates, including the need in some circumstances to permit the threshold to be time varying. Poisson–GP (Two–Component) Model. By “two-component model” we refer to the situation in which the two individual components, the Poisson process— with rate parameter λt —for the occurrence of exceedances of the high threshold u and the GP df (with shape parameter γt and scale parameter σt [u], which depends on the threshold u unlike the scale parameter for the EV df) for the excess over the threshold, are modeled separately. This approach was originally introduced in hydrology, for instance, to incorporate annual cycles in one or both of the components. This is the description of an exceedance process with an homogeneous Poisson process, see Section 9.1, or an inhomogeneous Poisson process, see Section 9.5, in the time scale and GP marks for the exceedances themselves. Analogous to the case of block maxima (15.1), it would be natural to express log λt , log σt [u], and perhaps γt as functions of a covariate. For the statistical validation of the model, the non–stationarity in the GP df can be removed by using the relationship between an arbitrary GP distribution and the standard exponential (i.e., GP0 df), corresponding to (15.2) for EV dfs. Namely, if Yt has a GP df with parameters λt and σt [u], then εt = (1/γt ) log(1 + γt Yt /σt [u])

(15.3)

has a W0,0,1 df (see Chapter 1). With marked dependence of the extremal characteristics on a covariate (e.g., in the case of a substantial trend or cycle), it may be that the threshold itself ought to vary with the covariate, i.e., with time t, writing ut instead of u. For simplicity, we ignore this complication in the notation used here.

358

15. Environmental Sciences

Point Process Approach. By “point process approach,” we refer here to the treatment of the problem as a full–ﬂedged two–dimensional, non–homogeneous point process, rather than modeling the two components separately2. Here the one–dimensional Poisson process for the occurrence of exceedances and the GP df for the excesses are modeled simultaneously, see Section 9.5, page 260. This approach has the advantage treating all of the uncertainty in parameter estimation in a uniﬁed fashion, e.g., making it more straightforward to determine conﬁdence intervals for return levels. Interpretation can be enhanced if the point process is parameterized in terms of the EV df. To do this, it is convenient to specify a time scaling parameter, say h > 0, e.g., h ≈ 1/365.25 for annual maxima of daily data. Then the parameters of the point process, λt (i.e., rate parameter per unit time), γt , and σt [u], are related to the parameters of the EV df, γt , µt , and σt , by log λt = −(1/γt ) log[1 + γt (u − µt )/σt )],

σt [u] = σt + γt (u − µt ),

(15.4)

with the shape parameter γt being equivalent3 . Now the model has at least a limited theoretical interpretation as arising as the limiting distribution which would be obtained if many observations were available at a ﬁxed time t (instead of just one as in practice) and the largest value were taken. The nonlinearity and interaction in the relationships in (15.4) imply that expanding some of the parameters of the point process components as simple functions of a covariate would not necessarily correspond to nearly such a simple model in terms of the EV df parameters, see Section 9.5 for technical details. Another question concerns how to extend the concepts of return period and level which originated in the context of stationarity, i.e., no covariates. One could always think in terms of an “eﬀective” return period and level, consistent with the theoretical interpretation just discussed. We defer the discussion of possible extensions of these concepts until they arise in the context of speciﬁc examples later in this chapter. Finally, the choice of the time scaling constant h should be viewed as arbitrary. Speciﬁcally, δ = h/h∗ denotes the ratio between two diﬀerent time scaling parameters (e.g., annual versus monthly maxima), then the corresponding parameters of the EV df (say γ, µ, and σ for time scale h versus γ ∗ , µ∗ , and σ ∗ for time scale h∗ ) are related by4 γ ∗ = γ,

µ∗ = µ + [σ ∗ (1 − δ −γ )]/γ,

σ ∗ = σδ γ .

(15.5)

2 Smith, R.L. (2001). Extreme value statistics in meteorology and the environment. In Environmental Statistics, Chapter 8, 300–357 (NSF–CBMS conference notes). Available at www.unc.edu/depts/statistics/postscript/rs/envnotes.pdf. 3 Katz, R.W., Parlange, M.B. and Naveau, P. (2002). Statistics of extremes in hydrology. Advances in Water Resources 25, 1287–1304. 4 Katz,

R.W., Brush, G.S. and Parlange, M.B. (2005). Statistics of extremes: Modeling ecological disturbances. Ecology 86, 1124–1134.

15.3. Example of Trend

15.3

359

Example of Trend

Fitting a trend constitutes one of the simplest forms of covariate analysis. By means of an example, we contrast the traditional approach of trend analysis to that more in harmony with extreme value theory.

Traditional Approach The traditional approach to trend analysis of environmental extremes would involve ﬁtting a trend, ordinarily by the method of least squares, in the mean (and possibly in the standard deviation) of the original time series. Then the extreme value analysis is applied to residuals, presumed stationary, from this trend analysis (see Chapter 4). There are several possible drawbacks to such an approach. For one thing, it is in eﬀect assumed that removing a trend in the overall mean would necessarily eliminate any trend in extremes as well. For another, such a two–stage estimation approach makes it diﬃcult to account for all of the uncertainty in parameter estimation, with the error involved in constructing the residuals being usually neglected.

Extreme Value Approach In the extreme value approach, we simply expand the parameters of the EV df as functions of time, e.g., as in (15.1). Of course, determining the appropriate functional form of trend is not necessarily a routine matter. It should further be recognized that such an analysis is not based on any statistical theory of extreme values for non–stationary time series per se. But recall the general interpretation for an EV df with time–dependent parameters as discussed earlier.

Example In contrast to global warming, the “urban heat island” refers to a warming eﬀect on the local climate attributable to urbanization. This phenomenon is well documented in terms of its eﬀects on mean daily minimum and maximum temperature. Among other things, the warming trend is more substantial for minimum, rather than maximum, temperature. So we analyze the extremes for a time series of daily minimum temperature during summer (i.e., July–August) at Phoenix, Arizona, USA, for the 43–year time period 1948–19905. This area experience rapid urbanization during this time period, with a substantial trend in the mean of the distribution of daily minimum temperature being apparent. For simplicity, we adopt a block minima approach; strictly speaking, ﬁtting the EV df for block maxima to negated block minima and 5 Tarleton,

L.F. and Katz, R.W. (1995). Statistical explanation for trends in extreme temperatures at Phoenix, Arizona. Journal of Climate 8, 1704–1708.

360

15. Environmental Sciences

minimum temperature (oF)

then converting the results back into the appropriate form for block minima, see Chapter 1, with the time series of summer minima being shown in Fig. 15.1.

Fig. 15.1. Time series of summer (July–August) minimum of daily minimum temperature at Phoenix, Arizona, USA, 1948–1990. Also includes trend in conditional median of ﬁtted EV df (i.e., eﬀective two– year return level) along with pointwise approximate 95% conﬁdence limits.

75

70

65

median 95% limits

50

60

70 year

80

90

Table 15.1 summarizes the results of ﬁtting the EV df to block minima by the method of maximum likelihood, with trends in the parameters of the form: γt = γ,

µt = µ0 + µ1 t,

log σt = σ0 + σ1 t,

for t = 1, . . . , 43.

(15.6)

Three nested candidate models are compared: (i) µ1 = σ1 = 0, i.e., no trend in either µ or σ; (ii) µ1 = 0, σ1 = 0, i.e., trend in µ but not in σ; (iii) µ1 = 0, σ1 = 0, i.e., trends in both µ and σ. The negative log–likelihoods (denoted by − log L in the table) indicate that model (ii) with a trend in only the location parameter is the superior ﬁtting model. Table 15.1. Maximum likelihood estimates of parameters (with standard errors of trend parameters given in parentheses) of EV df ﬁtted by block minima approach for trend analysis of extreme low summer (July–August) temperatures (◦ F) at Phoenix, Arizona, USA, 1948–1990. model

γ ˆ

µ ˆ0

µ ˆ1

σ ˆ0

σ ˆ1

− log L

µ1 = σ1 = 0

−0.184

70.88

0

1.346

0

121.52

µ1 = 0, σ1 = 0

−0.204

66.05

0.202 (0.041)

1.135

0

111.52

µ1 = 0, σ1 = 0

−0.211

66.17

0.196 (0.041)

1.338

−0.009 (0.010)

111.11

15.4. Example of Cycle

361

The estimated slope of the trend in the location parameter is µ ˆ1 = 0.202 ◦ F per year for model (ii), or an estimate of the urban warming eﬀect in terms of extreme low temperatures. Fig. 15.1 shows the corresponding trend in the median, i.e., eﬀective two–year return level, of the conditional EV df for the best ﬁtting model (ii). Pointwise 95% local conﬁdence intervals for the conditional median are also included in Fig. 15.1. Using the expression for the return level for the lowest temperature during the tth summer as a function of the corresponding parameters of the EV df (see Chapter 1), these intervals can be derived from the large–sample standard errors for the maximum likelihood estimators. A Q–Q plot for model (ii) based on (15.2) appears reasonably satisfactory (not shown). Nevertheless, the pattern in Fig. 15.1 suggests that an alternative form of trend in the location parameter, such as an abrupt shift, might be more appropriate. The same conclusion concerning the existence of a trend in extreme low summer temperatures is reached if the point process approach were applied instead.

15.4

Example of Cycle

Fitting cycles constitutes another simple form of covariate analysis. By means of an example, we contrast the traditional approach of seasonal analysis to that more in harmony with extreme value theory, as well as indicating an inherent advantage of the point process approach over block maxima.

Traditional Approach The traditional approach to cyclic analysis of environmental extremes would involve ﬁtting a cyclic function (e.g., sine wave), ordinarily by the method of least squares, to the mean (and possibly to the standard deviation) of the original time series. Then the extreme value analysis is applied to the residuals from the cyclic analysis. The drawbacks to this approach are identical to those for traditional trend analysis; namely, the possibility of a diﬀerent cyclic form for extremes than that for the mean and standard deviation, as well as the lack of an integrated treatment of uncertainty.

Extreme Value Approach Like the extreme value approach for modeling trends, we simply expand the parameters of the EV df as functions, in this case periodic, of time. For instance, in the following example, the location parameter and logarithm of the scale parameter of the EV df are both modeled as sine waves, whereas the shape parameter is assumed independent of time.

362

15. Environmental Sciences

Example In many regions, daily precipitation exhibits marked seasonality. Such cycles are well documented for both the probability of occurrence of precipitation and for the conditional mean (or median) amount of precipitation given its occurrence. Yet the seasonality in precipitation extremes is not typically explicitly taken into account in extreme value analysis of precipitation (e.g., to estimate upper quantiles of precipitation amount associated with ﬂooding). So we analyze the extremes for a time series of daily precipitation amount at Fort Collins, Colorado, USA, for the 100–year time period 1900–1999 (also see the article by Katz et al. (2002) mentioned on page 358). For such a long time series, it is convenient to summarize the data in terms of block maxima, with Fig. 15.2 showing the derived time series of annual maxima. Nevertheless, we will actually apply the point process approach to model the extremal behavior with seasonality being permitted. Although much year–to–year variation is present, no long–term trend is evident in Fig. 15.2. Because of a ﬂood which occurred on 28 July 1997 (with an observed value of 4.63 inches), this data set is of special interest.

precipitation (in)

4

2

Fig. 15.2. Time series of annual maximum of daily precipitation amount at Fort Collins, Colorado, USA, 1900–1999.

0 1900

1950 year

2000

Table 15.2 summarizes the results of ﬁtting the EV df indirectly through the point process approach by the method of maximum likelihood. Annual cycles in the form of sine waves are incorporated for the location parameter and logarithm of the scale parameter: γt µt

= γ, = µ0 + µ1 sin(2πt/T ) + µ2 cos(2πt/T ),

log σt

= σ0 + σ1 sin(2πt/T ) + σ2 cos(2πt/T ),

for t = 1, . . . , 36524 with time scaling constant h = 1/T, T ≈ 365.25.

(15.7)

15.4. Example of Cycle

363

The threshold of u = 0.395 inches was chosen by trial and error, perhaps a bit lower than optimal for wetter times of the year, a compromise to avoid the complication of a time varying threshold. The parameter estimates are given for the case of no declustering (with little evidence, in general, of the need for declustering daily precipitation extremes), but quite similar results are obtained when runs declustering with r = 1 is applied (see Chapter 2). Three nested candidate models are compared in Table 15.2: (i) µ1 = µ2 = σ1 = σ2 = 0, i.e., no cycle in either µ or σ; (ii) µ1 = 0, µ2 = 0, σ1 = σ2 = 0, i.e., cycle in µ but not in σ; (iii) µ1 = 0, µ2 = 0, σ1 = 0, σ2 = 0, i.e., cycles in both µ and σ. The negative log–likelihoods (denoted by − log L in Table 15.2) indicate that model (iii) with annual cycles in both the location parameter and the logarithm of the scale parameter of the EV df is the superior ﬁtting model. A Q–Q plot for model (iii) based on (15.2), comparing the observed annual maxima to the EV df ﬁtted indirectly by the point process approach, appears reasonably satisfactory (not shown). A more complex form of extremal model might include a sine wave for the shape parameter as well, or a sum of more than one sine wave for the location parameter and/or logarithm of the scale parameter. Table 15.2. Maximum likelihood estimates of parameters of EV df (parameterized in terms of annual maxima, time scaling constant h = 1/365.25) ﬁtted by point process approach (threshold u = 0.395 inches) for annual cycle in extreme high daily precipitation amount (inches) at Fort Collins, Colorado, USA, 1900-1999. µ ˆ1

µ ˆ2

σ ˆ0

σ ˆ1

σ ˆ2

− log L

0

0

−0.631

0

0

−1359.82

σ1 = σ2 = 0

0.103 1.306 0.082 −0.297 −0.762

0

0

−1521.45

no contraints

0.182 1.281 −0.085 −0.805 −0.847 −0.124 −0.602 −1604.29

model

γˆ

µ ˆ0

µ1 = µ2 = σ1 = σ2 = 0 0.212 1.383

For the best ﬁtting model (iii), Fig. 15.3 shows the eﬀective 100–year return level, with the parameters of the EV df being rescaled for sake of comparison using (15.5) to reﬂect the maximum of daily precipitation amount over a month instead of a year (i.e., time scaling constant h∗ = 12/365.25). These estimated return levels range from a low in mid January of about 1.1 inches to a high in mid July of about 4.3 inches. To give a rough feeling for the actual annual cycle in extreme precipitation, the observed monthly maximum of daily precipitation is also included in Fig. 15.3. Consistent with the eﬀective return levels for the ﬁtted EV df, a marked tendency is evident toward higher precipitation extremes in summer than in winter. It is also of interest to estimate the return period for the high precipitation in July 1997. With annual cycles in the parameters of the EV df, the determination

364

15. Environmental Sciences

5

precipitation (in)

4

3

2

1

0 0

100

200

300

Fig. 15.3. Annual cycle in eﬀective 100–year return level for ﬁtted EV distribution for monthly maximum of Fort Collins daily precipitation. Observed values of monthly maximum of daily precipitation indicated by circles.

day

of a return period involves a product of probabilities that diﬀer depending on the day of year (i.e., of the form p1 × · · · × pT instead of simply pT , where pt denotes the probability on the tth day of the year); for simplicity, treating the daily precipitation amounts as independent. Reﬁtting only the data for the time period before the ﬂood, i.e., 1900–1996, using model (iii), the estimated return period for the observed daily amount of 4.63 inches is roughly 50.8 years.

15.5

Example of Covariate

Fitting covariates which are random variables themselves, such as geophysical quantities, is no more involved than the examples of trends and cycles just presented. Yet such examples are more compelling, both in terms of the potential predictability of extremes (e.g., reﬂected in terms of conﬁdence intervals for return levels whose length varies conditional on the covariate) and in terms of its appeal from an environmental science perspective.

Traditional Approach Even in ﬁelds such as hydrology with a rich tradition of reliance on extreme value analysis, an inconsistency arises with extreme value theory typically being abandoned in favor of ordinary regression analysis, either for the entire data set or for a subset consisting only of extremes, if covariates are treated. As an ad hoc approach, sometimes an ordinary extremal analysis is conducted separately depending on a few discretized categories of the covariate (e.g., “above average” or “below average”). The disadvantages of such traditional approaches are somewhat subtle, with the central issue being the lack of a robust treatment of extremes.

15.5. Example of Covariate

365

Extreme Value Approach Just like the extreme value approach for modeling trends or cycles, we expand the parameters of the EV df as functions of one or more physically based covariates. But now the issue of how to specify the functional form of such relationships is particularly challenging, ripe for input from environmental or geophysical scientists.

Example It is well understood that heavy precipitation is associated with particularly meteorological conditions, involving other variables such as pressure. To demonstrate the viability of incorporating physically based covariates into extremal analysis, a prototypical example is considered. This example is not intended to constitute a realistic treatment of the various meteorological factors known to have an inﬂuence on heavy precipitation. So we analyze the extremes for a time series of daily precipitation amount at Chico, California, USA, during the month of January over the time period 1907– 1988, with fours years have been eliminated from the data set because of missing values (also see the paper by Katz et al. mentioned on page 362). As a covariate, the January average sea level pressure at a single grid point (actually derived from observations within a grid box) over the Paciﬁc Ocean adjacent to the California coast is used, say a random variable denoted by Y . Fig. 15.4 shows a scatterplot of the January maxima of daily precipitation amount versus the pressure covariate, with at least a weak tendency for lower maximum precipitation when the average pressure is higher being apparent. Rather than using monthly block maxima (as, for simplicity, in Fig. 15.4), we actually ﬁt the EV df indirectly through the point process approach by the method of maximum likelihood, with the results being summarized in Table 15.3. Given average pressure X = x, the location parameter and the logarithm of the scale parameter of the conditional EV df are assumed linear functions of y: γ(x) = x,

µ(x) = µ0 + µ1 x,

log σ(x) = σ0 + σ1 x .

(15.8)

These forms of functional relationship are intended solely for illustrative purposes, not necessarily being the most physically plausible. Because daily time series for the single month of January are being modeled, a time scaling constant of h = 1/31 is used. The threshold of u = 40 mm was selected by trial and error, with no declustering being applied. Three nested candidate models are compared in Table 15.3: (i) µ1 = σ1 = 0, i.e., no variation with y; (ii) µ1 = 0, σ1 = 0, i.e., µ varies with y, but σ does not; (iii) µ1 = 0, σ1 = 0, i.e., both µ and σ vary with y.

366

15. Environmental Sciences

The negative log–likelihoods (denoted by − log L in Table 15.3) suggest that model (ii), with only location parameter of the conditional EV df depending on pressure, is the superior ﬁtting model. In particular, a likelihood ratio test for model (ii) versus model (iii) indicates only weak evidence that the scale parameter ought to be varied as well (p–value ≈ 0.209). A Q–Q plot for model (ii) based on (15.2), comparing the observed monthly maxima to the EV df ﬁtted indirectly by the point process approach, appears reasonably satisfactory (not shown). Table 15.3. Maximum likelihood estimates of parameters of EV df (parameterized in terms of annual maximum, time scaling constant h = 1/31) ﬁtted by point process approach (threshold u = 40 mm) to daily precipitation amount (mm) at Chico, California, USA, conditional on pressure covariate (mb, with 1000 mb being subtracted), 1907–1988. γ ˆ

µ ˆ0

µ ˆ1

σ ˆ0

σ ˆ1

− log L

µ1 = σ1 = 0

0.198

35.49

0

2.226

0

244.10

µ1 = 0, σ1 = 0

0.151

58.13

−1.361

2.315

0

235.27

µ1 = 0, σ1 = 0

0.199

58.15

−1.284

2.979

−0.045

234.49

model

The estimated slope parameter in model (ii) is µ ˆ1 = −1.361 mm per mb, or higher precipitation extremes being associated with lower pressure. For the best ﬁtting model (ii), the conditional median of the ﬁtted EV df (i.e., eﬀective two–year return level) is also included in Fig. 15.4. Another way of interpreting the ﬁtted model is in terms of eﬀective return periods. For model (i) (i.e., no dependence on pressure), the estimate of the conventional 20–year return level is 73.0 mm. But this return level would correspond to eﬀective return periods, based on ﬁtted model (ii), ranging from 8.1 years for the lowest observed pressure to 44.9 years for the highest.

precipitation (mm)

140

100

Fig. 15.4. Scatterplot of January maximum of daily precipitation amount at Chico, California, USA, versus January mean pressure. Also includes conditional median of ﬁtted EV df (i.e., eﬀective 2–year return level).

60

20

1010

1015

1020

pressure (mb)

1025

15.6. Numerical Methods and Software

367

One natural extension of this example would be to allow the pressure covariate to vary from one day to the next, in meteorological terminology considering high frequency variations instead of just low frequency ones. The relationship between precipitation extremes and pressure could be simultaneously modeled over the entire year, but such a model might well entail the complication of a diﬀerent relationship depending on the time of year to be physically realistic.

15.6

Numerical Methods and Software

Although not diﬃcult in principle to program, most existing software routines for extreme value analysis do not make any provision for the incorporation of covariates, perhaps another explanation for alternatives to extreme value theory still being prevalent in applications. So a brief description focused on techniques for maximum likelihood estimation and on the available software is now provided.

Maximum Likelihood Estimation Because the expansion of the parameters of extremal models in terms of one or more covariates can be readily incorporated in maximum likelihood estimation, the expressions for the likelihood function of the EV df, whether for the block maxima or point process approaches, are not repeated here for this speciﬁc situation (but see Chapter 5). It should be acknowledged that the presence of covariates makes the routine reliance on iterative numerical methods more problematic, with the possibility of multiple local maxima, etc.

Statistical Software Software for extreme value analysis, which does make provision for covariates, includes the suite of S functions provided as a companion to the text by Stuart Coles [9]. These functions allow for covariates in ﬁtting the EV df to block maxima, the GP df to excesses over a high threshold, and the EV df indirectly through the point process approach. Based on these same S functions (ported into R), the Extremes Toolkit provides a graphical interface so that users, particularly in the environmental and geophysical sciences, unfamiliar with R or S can still make use of the Coles software (gateway: www.issse.ucar.edu/extremevalues/extreme.html).

Part V

Topics in Finance and Insurance

Chapter 16

Extreme Returns in Asset Prices co–authored by C.G. de Vries1 and S. Caserta2

Throughout this chapter, we assume that speculative prices st like those pertaining to stocks, foreign currencies, futures etc. are evaluated at discrete times t = 0, 1, 2, . . . , where the periods can be days or weeks. Thus, if s0 is the price of an investment at time t = 0, then the return—the diﬀerence of prices taken relatively to the initial price—at time T is (sT − s0 )/s0 . Our primary interest concerns daily returns under discrete compounding (arithmetic returns) r˜t =

st − st−1 st−1

or the daily returns under continuous compounding (log–returns) rt = log(st ) − log(st−1 ).

(16.1)

These quantities are close to each other if the ratio st /st−1 is close to 1. We will focus on the latter concept. Log–returns are also called geometric returns in the ﬁnancial literature. The speculative return series generally exhibits two empirical properties. The ﬁrst property is that the variability of the rt shows a certain clustering which makes 1 Tinbergen Institute and Erasmus University Rotterdam; co–authored the 1st and 2nd edition. 2 Tinbergen

Institute and Erasmus University Rotterdam; co–authored the 2nd edition.

372

16. Extreme Returns in Asset Prices

the variance somewhat predictable. The other feature is that the random log–prices log St satisfy the martingale property. Both of these properties will be discussed in greater detail. Keep in mind that we write Rt and St when stochastic properties of random returns and prices are dealt with. In Section 16.1, we collect stylized facts about ﬁnancial data and give references to the history of statistical modeling of returns. In Section 16.2, daily stock market and exchange rate returns are visualized to get a ﬁrst insight into ﬁnancial data. The pot–methodology is applied in Section 16.3 to estimate the upper and lower tails of log–returns and cumulated return dfs. The loss/proﬁt variable is represented by means of return variables in Section 16.4. Such representations make the statistical results of Section 16.3 applicable to the loss/proﬁt variable. As an application, we estimate the q–quantile of the loss/proﬁt distribution in Section 16.5 under diﬀerent statistical models for the returns. This is the so–called Value–at–Risk (VaR) problem faced by ﬁnancial intermediaries like commercial banks. A related question is to evaluate the amount of capital which can be invested such that at time T the possible loss exceeds a certain limit l with probability q. Section 16.6 deals with the VaR methodology for a single derivative contract. Finally, we focus our attention on the modeling of returns by ARCH/GARCH and stochastic volatility (SV) series in Section 16.7 and predict the conditional VaR in Section 16.8.

16.1

Stylized Facts and Historical Remarks

In this section, we collect some basic facts about returns series of ﬁnancial data. We compare the relationship between arithmetic and log–returns, deal with the weekend and calendar eﬀects and discuss the concept of market eﬃciency in conjunction with the martingale property.

Arithmetic Returns and Log–Returns The subsequent explanations about the advantage of using log–returns rt compared to arithmetic returns r˜t heavily relies on a discussion given by Philippe Jorion [33]. • For the statistical modeling, e.g., by means of normal dfs, it is desirable that the range of the returns is unbounded. This property is merely satisﬁed by log–returns because the arithmetic returns are bounded from below by −1. • Some economic facts can be related to each other in a simpler manner by using log–returns. For example, let st be the exchange rate of the U.S. dollar against the British pound and let rt = log(st /st−1 ) be the pertaining log– return. Then, the exchange rate of the British pound against the U.S. dollar is 1/st . This yields that the log–return, from the viewpoint of a British investor, is just −rt = log((1/st )/(1/st−1 )).

16.1. Stylized Facts and Historical Remarks

373

• It is apparent that the price sT at time T can be regained from the daily returns r1 , . . . , rT and the initial price s0 by sT = s0 exp rt . (16.2) t≤T

Conversely, the T –day log–return log sT − log s0 of the period from 0 to T is the sum of the daily log–returns which is a useful property in the statistical context.

Weekend and Calendar Eﬀects Before we can analyze any speculative return series, we must deal with the fact that returns are computed at equally–spaced moments in time, but that business time does not coincide with physical time. For example, stock markets are closed at night and during weekends. This poses a problem for the deﬁnition of returns at higher frequencies. The following ad hoc procedures can be employed to deal with the weekend eﬀect. 1. (Returns with Respect to Trading Days.) Just take the prices for the given trading days and compute the returns. 2. (Omitting Monday Returns.) Omit the days for which prices are not recorded including the consecutive day. Thus, after a weekend, the Monday returns are also omitted. 3. (Distributing Monday Returns.) The return registered after a gap (e.g., the return recorded on Monday) is equally distributed over the relevant days (e.g., if r is the return on Monday, then r/3 is taken as the return on Saturday, Sunday and Monday). Distributing or omitting the Monday returns is a very crude method; a thorough analysis and a reﬁned treatment of the weekend eﬀect may be desirable for certain questions. Of course, one may also take just the original returns with the potential disadvantage that the Monday may exhibit the behavior of returns accumulated over three days. In the book [54] by S. Taylor there is a detailed discussion of further calendar eﬀects such as the dependence of the mean and standard deviation of returns on the day in the week or the month in the year. Such eﬀects will be neglected in this chapter. The economic background of ﬁnancial time series is also well described in the books [1] and [12].

Market Eﬃciency and the Martingale Property The martingale property of the random return series {Rt } derives from economic insight. The returns {Rt } are regarded as martingale innovations, a property which

374

16. Extreme Returns in Asset Prices

is characterized by the condition that the conditional expectation of the future return Rt given the past returns value rt−1 , . . . , r0 with r0 = log s0 (or, equivalently, given the prices st−1 , . . . , s0 ) is equal to zero. On the contrary, suppose that E(Rt |st−1 , . . . , s0 ) = 0 holds. Let as assume that the conditional expectation is positive so that the price is expected to rise. In speculative markets, lots of arbitrageurs quickly eliminate unfair gambles: buying at todays low price st−1 is more than a fair gamble. If all agents have this information, they will all want to buy at st−1 in order to resell at the higher expected price tomorrow. Yet if many try to buy, this already drives up the price today and the expected gain disappears. If the martingale property of returns is accepted, then the returns are necessarily uncorrelated.

Some Historical Remarks The hypothesis that logarithmic speculative prices form a martingale series was ﬁrst raised by Bachelier3 . Speciﬁcally, he assumed normally distributed returns. Writing Rt = µ + σWt for the random log–returns, where the Wt are iid standard normal random variables, µ is the drift parameter, and σ > 0 is the so–called volatility, one arrives in (16.2) at a discrete version of the famous Black–Scholes4 model, namely,

Wt . (16.3) ST = S0 exp µT + σ t≤T

Later, Benoit Mandelbrot5 discovered that the speculative return series, i.e., the innovations of the martingale, are fat–tailed distributed. He suggested the modeling of speculative returns by means of non–normal, sum–stable random variables (see also [40], [1], and the book by F.X. Diebold6 ). But this latter model conﬂicts with the fact that return series generally exhibit bounded second moments, see, e.g., Akgiray and Booth7 and the literature cited therein. 3 Bachelier,

L.J.B.A. (1900). Thˆeorie de la Speculation. Gauthier–Villars, Paris.

4 Black,

F. and Scholes, M. (1973). The pricing of options and corporate liabilities. J. Political Economy 81, 637–659. 5 Mandelbrot, B.B. (1963). The variation of certain speculative prices. J. Business 36, 394–419. 6 Diebold, F.X. (1989). Empirical Modeling of Exchange Rate Dynamics. Lect. Notes in Economics and Math. Systems 303, Springer, Berlin. 7 Akgiray,

V. and Booth, G.G. (1988). The stable-law model of stock returns. J. Business & Economic Statistics 6, 51–57.

16.2. Empirical Evidence in Returns Series

16.2

375

Empirical Evidence in Returns Series

Certain properties of ﬁnancial series of stock market returns and exchange rate returns will be illustrated by means of scatterplots. One recognizes a clustering of higher volatility of returns which will also be captured by plots of sample variances over moving windows in the time scale (related to that what is done by means of moving averages).

Stock Market and Exchange Rate Data Next, we partially repeat and extend the analysis made by Loretan and Phillips8 concerning • the Standard & Poors 500 stock market index from July 1962 to Dec. 1987 (stored in fm–poors.dat), and • exchange rates of the British pound, Swiss franc, French franc, Deutsche mark, and Japanese yen measured relatively to the U.S. dollar from Dec. 1978 to Jan. 1991 (stored in fm–exchr.dat9 ). We visualize the Standard & Poors 500 stock market data and the exchange rates of the British pound measured relatively to the U.S. dollar. Stock market and exchange rate data exhibit a similar behavior so that a joint presentation is justiﬁed.

Fig. 16.1. (left.) Log–index log st of Standard & Poors 500 stock market. (right.) Log– exchange rate log st of British pound relative to U.S. dollar. 8 Loretan, M. and Phillips, P.C.B. (1994). Testing the covariance stationarity of heavy– tailed time series. J. Empirical Finance 1, 211–248. 9 Extended

data sets are stored in fm–poor1.dat (from June 1952 to Dec. 1994) and in fm–exch1.dat (from Jan. 1971 to Feb. 1994).

376

16. Extreme Returns in Asset Prices

Next, the equally (over the weekend) distributed returns are displayed in a scatterplot. In Oct. 1987, there are extraordinarily high and low returns to the stock market index which are not displayed in Fig. 16.2 (left).

Fig. 16.2. (left.) Daily returns rt to the Standard & Poors 500 stock market index. (right.) Daily exchange rate returns rt to the British pound relative to U.S. dollar.

The scatterplot of the Standard & Poors log–returns (with changed signs) was partly displayed in Fig. 1.1 together with a plot of a moving sample quantiles.

The Sample Autocorrelations of Log–Returns The serial autocorrelations for the returns (based on trading days or with the returns omitted after a gap) are practically equal to zero which supports the martingale hypothesis. In particular, the expectation of returns conditioned on the past is equal to zero. This is illustrated for the Standard & Poors market indices in Fig. 16.3. 0.5

correlation

0.4 0.3

Fig. 16.3. Autocorrelation functions for the Standard & Poors log–returns w.r.t. the trading days (solid) and with the Monday returns distributed (dotted).

0.2 0.1

1

2

3 lags

4

5

6

16.2. Empirical Evidence in Returns Series

377

There is a slightly larger positive correlation for the lag h = 1, if the Monday returns are distributed over the weekend.

The Tranquility and Volatility of Returns Series of daily squared returns rt2 from stock and foreign exchange markets are visualized by a scatterplot. 0.003

squared returns

squared returns

0.002

0 0

4000

0 0

8000

time in days

2000

4000

time in days

Fig. 16.4. Squared daily returns rt2 to (left) Standard & Poors 500 stock market index, and (right) exchange rates of the British pound measured relatively to the U.S. dollar.

time

1987

1981

1975

Fig. 16.5. Moving sample variance over a time horizon of m = 250 days for the Standard & Poors data. 1969

0.0 1963

5e-08

1e-07

The illustrations in Fig. 16.4 exhibit that there are periods of tranquility and volatility of the return series in a particularly impressive manner. The periods of volatility can also be expressed by moving sample variances (1/m) ti=t−m (ri − r¯t )2 based on the log–returns of the preceding m days.

378

16. Extreme Returns in Asset Prices

This shows that, while the return process is a fair game, risk is spread unevenly. Hence, the risk of an investment is clustered through time and somewhat predictable. Supposedly, investors trade oﬀ return against risk, and hence portfolio management has to take this predictability into account. In technical terms, we may assume that the returns are conditionally heterosketastic (the variance is varying conditioned on the past).

Trend and Symmetry For currencies no trend has to be eliminated. Also, currencies are naturally symmetric due to the fact that the return, e.g., for the Deutsche mark on the U.S. dollar is the negative of the return of a Deutsche mark investment for U.S. dollars (see also page 372). Therefore, for exchange rate returns, the tails will also be estimated under the condition of symmetry. Tail estimators are also applied to returns reﬂected in 0. For stock prices, one must ﬁrst eliminate the positive trend, due to growth of the economy, to get to the martingale model.

16.3

Parametric Estimation of the Tails of Returns

Again, we may visualize returns by means of the usual nonparametric tools like kernel densities, sample mean excess functions, etc., see Section 8.1 for a justiﬁcation of classical extreme value statistics. The application of standard estimation procedures may also be relied on ergodic theory, see page 209 for references to the literature. The overall impression of stock market and exchange rate data is that normal distributions or similar symmetric distributions can be well ﬁtted to the central data, yet there seem to be fat tails. So even in those cases where we estimate light tails (exponential or beta tails) within the GP model, there seems to be a kurtosis larger than that of the normal distribution. We estimate the upper and lower tail indices of stock market and exchange rate returns and compare our estimates with those of Loretan and Phillips (L&P) who always employed the Hill estimator (presumably to the returns with respect to the trading days).

Stock Market Returns We start our investigations with the famous Standard & Poors stock market index which has been frequently analyzed in the literature. There is a certain trend in the returns that can be captured by a quadratic least squares line to some extent. The trend is negligible, when GP parameters are estimated, as long as there is a time horizon of less than about 10 years.

16.3. Parametric Estimation of the Tails of Returns

379

Example 16.3.1. (Estimating the Tail Indices of Returns to the Standard & Poors Index.) In Table 16.1, Hill(GP1), Moment(GP) and MLE(GP) estimates of the lower and upper tail index α, based on the daily returns to the Standard & Poors index, are displayed. The number k of lower or upper extremes was chosen according to the insight gained from the diagrams of the estimators. We are also interested in the eﬀect of handling the daily returns in diﬀerent manners (taking the returns for each trading day or distributing or omitting returns after gaps). Table 16.1. Returns with respect to trading days and returns after gaps distributed or omitted. Tail Indices α of Standard & Poors Index Returns Lower (k = 150)

Upper (k = 100)

trad.

distr.

omit.

L&P

trad.

distr.

omit.

L&P

Hill(GP1)

3.39

3.79

4.33

3.59

3.81

3.70

3.70

3.86

Moment(GP)

2.77

2.59

4.40

–

4.26

3.67

3.67

–

MLE(GP)

3.25

2.20

4.26

–

4.32

3.52

3.52

–

The remarkable diﬀerence between the Moment(GP) or MLE(GP) estimates for the lower tail index—with returns after a gap distributed or omitted—is due to the drop from 282.70 to 224.84 of the Standard & Poors index during the well–known stock market crash on Monday, Oct. 19, 1987. Omitting this extraordinary event from the data yields an underestimation of the risk entailed in negative returns.

The most important message from the preceding example is that for these stock market returns, one must take heavy upper and lower tails with a tail index α around 3 into account. Related results are obtained for other stock market indices (as, e.g., for the Lufthansa and Allianz data stored in fm-lh.dat and fm-allia.dat).

Global Modeling of a Distribution, Local Modeling of the Tails As already mentioned on page 61: one major goal of this book is to select distributions which simultaneously ﬁt to the central as well as to the extreme data. The extreme part is analyzed by means of the tools of extreme value analysis. In Example 2.3.2, we successfully ﬁtted a mixture of two Gaussian distributions to the S&P500 data which were also dealt with in Example 16.3.1. Applying the MLEs in the Student model as well as in the model of sum– stable distributions, see Sections 6.3 and 6.4, we get the estimates as listed in Table 16.2.

380

16. Extreme Returns in Asset Prices

Student sum–stable

Parameters α σ 2.29 0.0034 1.34 0.0027

Table 16.2. MLEs of α and σ based on S&P data.

If the pertaining densities are additionally plotted in Fig. 2.11, they are hardly distinguishable from the Gaussian mixture and the kernel densities. Therefore, there are three candidates for the modeling of the Standard & Poors, namely, a Gaussian mixture, Student and sum-stable distribution. The insight gained from Example 16.3.1 speaks in favor of the Student modeling.

Exchange Rate Returns For exchange rate returns we ﬁnd light as well as heavy tails. The tail index is also estimated under the condition of symmetry. Under that condition one may base the estimation on a larger number of upper extremes. Example 16.3.2. (Estimating the Tail Indices of Daily Exchange Rate Returns: British Pound.) Our approach corresponds to that in Example 16.3.1. Table 16.3. Estimating the tail indices. Tail Indices α of British Pound Returns Lower (k = 75) Hill(GP1)

Upper (k = 75)

Symm. (k = 150)

trad. distr. omit. L&P trad. distr. omit. L&P

distr.

3.85

4.03

4.03

2.89

3.65

4.25

3.75

3.44

3.95

Moment(GP) 12.88 4.51

4.51

–

5.48

3.62

5.05

–

4.72

MLE(GP)

4.28

–

5.98

3.33

5.40

–

4.85

238.0 4.28

There is a greater variability in the Moment and MLE estimates based on returns with respect to trading days. The diagrams of estimates provide more insight. We remark that the Moment and ML estimates based on the symmetrized trading day data are around α = 6. The overall picture is that a Paretian modeling of the lower and upper tails is justiﬁed for the British daily exchange rate returns.

The insight gained from Example 16.3.2 suggest to intensify an exploratory analysis of the data and to apply additionally the L–moment and related estimators, see Chapter 14. The latter has not been done yet. A completely diﬀerent modeling must be taken for the Swiss franc. It seems to us that an exponential modeling for the tails of the distribution is justiﬁed.

16.3. Parametric Estimation of the Tails of Returns

381

If the estimation is carried out in the uniﬁed generalized Pareto (GP) model, then the estimates of the shape parameter γ are close to zero in the present case. Therefore, α = 1/γ attains large positive as well as small negative values. In such cases, it is preferable to carry out the estimation in the γ–parameterization to avoid bigger diﬀerences in the estimates of α for varying k. It is remarkable that the Hill estimator is incorrect, a fact which becomes apparent by comparing parametric and nonparametric plots, see also Fig. 5.2 (left) and the expansion in (6.38). Example 16.3.3. (Estimating the Tail Indices of Daily Exchange Rate Returns: Swiss Franc.) For daily exchange rate returns of the Swiss franc relative to the U.S. dollar, we obtain negative estimates of the lower tail index α. The estimates are based on equally distributed returns. When omitting Monday returns, one ﬁnds similar results. The chosen number k of extremes is 100. Table 16.4. Estimating the tail indices α and γ of daily exchange rate returns of the Swiss franc relative to the U.S. dollar with equally distributed returns (including Hill estimates taken from Loretan and Phillips (L&P) in the α–parameterization). Tail Indices α and γ of Swiss Franc Returns Lower (k = 100) α Hill(GP1)

Upper (k = 100)

γ

L&P

α

γ

L&P

Symmetric (k = 200) α

γ

3.61

0.28

3.10

4.16

0.24

2.77

3.66

0.27

Moment(GP)

−9.09

−0.11

–

9.67

0.10

–

−9.35

−0.11

MLE(GP)

−5.88

−0.17

–

18.19

0.05

–

−31.81

−0.03

Moment(GP) and MLE(GP) estimates γ for the lower tail index are negative yet close to zero. When employing the armory of nonparametric tools such as sample excess functions, Q–Q plots, sample qfs, etc. and then comparing the nonparametric and parametric curves, there is doubt that an application of the Hill estimator is correct. On the basis of these results, we suggest a beta or an exponential modeling for the lower tail. Moment(GP) and MLE(GP) estimates for the upper tail index can be negative for other choices of the number k of extremes. We suggest an exponential modeling of the upper tail in the case of Swiss exchange rate returns. The preceding remarks about the Hill estimator are applicable again. The estimates for the symmetrized sample conﬁrm the preceding conclusions.

There is a greater variability in the estimates of the shape parameter for varying numbers k of extremes which could be reduced, to some extent, by smoothing these estimates over a moving window. We shortly summarize results for the exchange rates of the French franc, Deutsche mark and yen against the U.S. dollar. We give a list of Moment(GP) and MLE(GP) estimates in the γ–parameterization.

382

16. Extreme Returns in Asset Prices

Table 16.5. Estimating the lower and upper tail indices of distributed daily returns based on k = 75 extremes (k = 150 extremes for the symmetrized sample). Estimating the Tail Index γ Moment(GP)

MLE(GP)

Lower

Upper

Symmetric

Lower

Upper

Symmetric

French franc

−0.11

−0.05

−0.05

−0.09

−0.04

−0.05

Deutsche mark

−0.19

0.02

−0.05

−0.23

−0.04

−0.14

0.06

0.08

0.007

−0.06

0.06

−0.03

yen

We see that for all three cases an exponential modeling for the tails seems to be adequate. A detailed exploration of extreme returns of further exchange rates, stock market indices and other speculative asset prices is desirable.

16.4

The Proﬁt/Loss Variable and Risk Parameters

At the time of writing ﬁnancial institutions like commercial banks have to meet new Capital Adequacy rules. A landmark is the Basle Committee accord of 1988 for credit risks which were supplemented by proposals for market risks starting 1993 (for details see the book by Jorion [33] and further supplements of the Basle Committee accord10 ). These rules require that a bank must have suﬃcient capital to meet losses on their exposures. In this context, we compute • the Value–at–Risk (VaR) as the limit which is exceeded by the loss of a given speculative asset or a portfolio with a speciﬁed low probability, • the Capital–at–Risk (CaR) as the amount which may be invested so that the loss exceeds a given limit with a speciﬁed low probability, see Section 16.5. Thus, we ﬁx either the invested capital (market value) or the limit and, then, compute the other variable. Further useful risk parameters of the loss/proﬁt distribution will be introduced at the end of this section. The VaR is a quantile of the loss (more precisely, proﬁt/loss) distribution which must be estimated from the data. This goal is achieved in the following manner. 1. The loss variable is represented by means of the returns so that the results from the preceding section become applicable. This is done in the subsequent lines. 10 Basle

Committee on Banking Supervision (1996). Supplement to the Capital Accord to Incorporate Market Risk. Basle Committee on Banking Supervision, Basle.

16.4. The Proﬁt/Loss Variable and Risk Parameters

383

2. We estimate the VaR based on diﬀerent statistical models for the returns, particularly making use of the GP modeling as outlined in Section 16.3. This step will be carried out in the next section. In both steps one must distinguish between the case of a single asset and the one of a portfolio.

Representing the Proﬁt/Loss Variable by Means of Returns Let V0 and VT be the market values of a single speculative asset or a portfolio at the times t = 0 and t = T . Usually, the time horizon is a day or a month (the latter corresponds to 20 trading days or, alternatively, to 30 days if the Monday returns are distributed over the weekend). Losses and proﬁts within the given period of T –days will be expressed by the loss (proﬁt/loss) variable as the diﬀerence of the market values VT and V0 . We have (16.4) LT = −(VT − V0 ). Notice that losses are measured as positive values. Conversely, there is a proﬁt if LT is negative. Under this convention, we may say that a loss is, for example, smaller than the 99% Value–at–Risk, see (16.11), with a probability of 99%. The T –day loss LT will be expressed by means of T –day returns

R(T ) = (−Rt ) (16.5) t≤T

taken with a changed sign. Next, we distinguish between representations of the loss variable for a single asset and for a portfolio. • (The Loss for a Single Asset.) The total market value Vt of an asset at time t can be expressed by Vt = hSt , where h is the number of shares, which are held within the given period, and St is the price at time t. From (16.2), where prices are represented by means of the daily log–returns, we conclude that the loss at time T is

LT = V0 1 − exp(−R(T ) ) (16.6) ≈ V0 R(T ) . • (The Portfolio Loss.) Let Vt,j = hj St,j be the market value of the jth asset in the given portfolio at time t, where hj are the numbers of shares which are held within the given period, and St,j are the prices at time t. Notice that

Vt = Vt,j (16.7) j

is the market value of the portfolio at time t.

384

16. Extreme Returns in Asset Prices We also introduce the vector of weights w = (w1 , . . . , wd ), where wj = V0,j /V0 . Notice that the wj sum to unity. The vector of weights determines the market strategy of the investor at the beginning of the period. We have

Vt = V0 wj St,j = V0 wSt (16.8) j

where St is the transposed vector of prices St = (St,1 , . . . , St,d ). From (16.2) and (16.7) deduce that the loss LT = −(VT −V0 ) of the portfolio at time T is

wj 1 − exp(−R(T,j) ) LT = V0 j

≈ V0

wj R(T,j) = V0 wR(T ) ,

(16.9)

j

where R(T ) = (R(T,1) , . . . , R(T,d) ) is the vector of random T –day log–returns (with changed sign) for the diﬀerent asset. If the portfolio consists of a single asset, then the formulas in (16.9) reduce to those in (16.6). The portfolio may also be treated like a single asset. The log–return of the portfolio is given by Rt∗ = log Vt − log Vt−1

(16.10)

with Vt as in (16.7). Now (16.6) is applicable with Rt∗ in place of Rt .

The Value–at–Risk (VaR) The Value–at–Risk parameter VaR(T, q) is the q–quantile of the loss distribution. The VaR at the probability q satisﬁes the equation P {LT ≤ VaR(T, q)} = q,

(16.11)

where LT is the loss variable in (16.4). We also speak of a VaR at the 99% or 95% level, if q = 0.99 or q = 0.95. Thus, for example, the loss is smaller than the VaR at the 99% level with a probability of 99%. If the VaR is computed to fulﬁll capital adequacy requirements, then it is advisable to choose a higher percentage level, say 99% or 99.9%. To compare risks across diﬀerent markets, a smaller level such as 95% can be appropriate. The VaR depends on the distribution of the returns. • (VaR ofa Single Asset.) Let FT denote the df of the T –day log–return R(T ) = t≤T (−Rt ) with changed sign. Thus, FT (x) = P {R(T ) ≤ x}.

(16.12)

16.4. The Proﬁt/Loss Variable and Risk Parameters

385

Applying (16.6) we see that the VaR can be written

V0 1 − exp −FT−1 (q)

VaR(T, q) =

V0 FT−1 (q),

≈

(16.13) (16.14)

where V0 is the market value at time t = 0. The VaR is overestimated in (16.14) in view of the inequality 1 − exp(−x) ≤ x, yet the error term is negligible if the q–quantile FT−1 (q) is not too large. • (VaR of a Portfolio.) The Value–at–Risk VaR(T, q) is the q–quantile and, respectively, the approximate q–quantile of the random variables in (16.9). In Section 16.5, the VaR is computed in a more explicit manner based on diﬀerent statistical models such as, e.g., the GP modeling for returns in the case of a single asset.

Further Risk Parameters Further risk parameters may be deﬁned as functional parameters of exceedance dfs pertaining to the loss L. Let F denote the df of L, and denote by F [u] the exceedance df at the threshold u (cf. (1.11)). An example of such a functional parameter is the expected shortfall which is the mean of F [u] with u = VaR(q) which has the representation

E LL > VaR(q)

∞

x dF [VaR(q)] (x)

= VaR(q)

=

1 1−q

1

VaR(x) dx,

(16.15)

q

wherethe second equation may be deduced with the help of the well–known for1 mula x dF (x) = 0 F −1 (q) dq. We see that the expected shortfall at the level q is an “average” of the Value–at–Risks with x ≥ q. Perhaps, it would be more reasonable to call

E L − VaR(q)L > VaR(q) expected shortfall as the expected loss which is not covered by the allocated capital of the bank. In Section 16.3 we estimated the upper tail of the distribution of returns and, thus, the exceedance df. Using a representation of the loss variable in Section 16.4 in terms of returns one can estimate the indicated risk parameters. Details will be given for the VaR in the subsequent section.

386

16.5

16. Extreme Returns in Asset Prices

Evaluating the Value–at–Risk (VaR)

Next, we discuss the estimation of the VaR under certain models for the return distribution. We start with the estimation of the VaR in the case of a single asset based on the GP–modeling. The estimation by means of the sample q–quantile is the second method. In the ﬁnancial literature this method runs under the label Historical Simulation (HS).

Estimating the VaR for a Single Asset: the GP Modeling We take representations of the VaR, given in (16.13) and (16.14). For simplicity, let the initial market value V0 be equal to 1. It remains to estimate the q–quantile FT−1 (q), where FT is the df of the T –day log–return R(T ) . Moreover, we assume that a GP df could be accurately ﬁtted to the upper tail of FT as it was done in Section 15.3. In Example 16.5.1, the VaR will be computed for T = 1 and T = 30 days and several large probabilities q in the case of the Standard & Poors index with the Monday returns distributed over the weekend. Example 16.5.1. (VaR for the Standard & Poors Index.) The Value–at–Risk VaR(T, q) is estimated for T = 1 and T = 30 based on the 9314 equally distributed, daily returns to the Standard & Poors Index. For T = 1 the q–quantile of the daily returns with changed sign is estimated in a parametric manner by means of the Moment(GP) estimator and our standard estimators of the location and scale parameters. The estimation is based on k = 150 lower extreme daily returns as in Example 16.3.1. To estimate VaR(30, q) the Moment(GP) estimator is applied to k = 30 extreme 30–days returns. The number of 30–days returns is 310. The estimated shape parameter is α = 2.4. In both cases, the upper tail of the qf FT−1 is estimated by the Pareto qf belonging to the estimated parameters. The VaR, according to (16.14), is listed in Table 16.6 for several values of q. Table 16.6. Estimating the Value–at–Risk VaR(T, q) for the Standard & Poors Index. Value–at–Risk VaR(T, q) probability q

0.99

0.995

0.999

0.9995

T =1

0.017

0.020

0.033

0.041

T = 30

0.128

0.169

0.333

0.435

For example, the loss within T = 30 days is smaller than VaR(30, 0.99) = 0.128 with a 99%–probability, if V0 = 1 is invested at time t = 0.

16.5. Evaluating the Value–at–Risk (VaR)

387

We also give the exact values VaR∗ = 1−exp(−VaR) of the Value–at–Risk according to (16.13). As mentioned before, the values in Table 16.6 overestimate the exact values VaR∗ . Table 16.7. Values VaR∗ (T, q) = 1 − exp(−VaR(T, q)) for the Standard & Poors Index. Value–at–Risk VaR∗ (T, q) probability q

0.99

0.995

0.999

0.9995

T =1

0.017

0.020

0.032

0.040

T = 30

0.120

0.155

0.283

0.353

For T = 1 the diﬀerences are negligible, yet there are remarkable diﬀerences for T = 30.

There is a remarkable coincidence between estimated parametric q–quantiles and sample q–quantiles when the parametric q–quantile lies inside the range of the sample.

Estimating the VaR: Historical Simulation In Historical Simulation (HS), the loss/proﬁt df of a given asset or a portfolio over a prescribed holding period of length T is simply given by the sample df of past losses and gains. We then translate this into a loss/proﬁt qf and read of the VaR. The advantage of HS relies on its simplicity and low implementation costs. But this very simplicity is also the cause of problems. The main problem is that extreme quantiles cannot be estimated, because extrapolation beyond past observation is impossible, and when estimation is possible the estimates are not reliable due to the lack of suﬃcient observations in the tail area. Moreover, the quantile estimators tend to be very volatile if a large observation enters the sample.

Estimating the VaR for a Portfolio: the Variance–Covariance Method This method is useful when we have to compute the VaR for a portfolio containing many diﬀerent assets. In fact, this task becomes particularly easy when all asset returns are assumed to be normally distributed and the loss variable of the portfolio is a linear function of these. In this case, the VaR is a multiple of the portfolio standard deviation and the latter is a linear function of individual variances and covariances.

388

16. Extreme Returns in Asset Prices We assume that the T –day log–return (with changed sign)

(−Rt,j ) R(T,j) = t≤T

of the jth asset at time t is a Gaussian random variable with mean zero and 2 unknown variance σT,j > 0. In addition, assume that the R(T,j) , j ≤ d, are jointly

Gaussian with a covariance matrix ΣT = σT,i,j as introduced on page 280. 2 . Necessarily, σT,j,j = σT,j Let V0,j be the market value of the jth asset in the portfolio at time t = 0. According to (16.9), the loss LT of the portfolio at time t = T can be approximately represented by (16.16) LT ≈ V0 wR(T ) , where R(T ) is the vector of the T –day log–returns R(t,j) . According to the well– known results for Gaussian random vectors (cf. page 280), the term wR(T ) in (16.16) is a Gaussian random variable with mean zero and standard deviation ' (16.17) σT = wΣT w . Combining (16.16) and (16.17) we get VaR(T, q) = V0 σT Φ−1 (q), where Φ−1 is the univariate standard Gaussian qf. An estimate of the VaR is obtained by replacing the variances and covariances σT,i,j in (16.17) by their sample versions sˆT,i,j , cf. (2.6), based on historical T –day log–returns. If there is a single asset, or the portfolio is dealt with like a single asset, and the daily log–returns are uncorrelated, then σT = V0 T 1/2 σ1 with σ1 denoting the standard deviation of a daily log–return.

Estimating the VaR for a Portfolio: the Copula Method A considerable improvement, compared to the simple variance–covariance method, is achieved when the univariate Gaussian margins are replaced by more realistic dfs. This is the copula method (cf. page 275) as already successfully applied in the Chapters 12 and 13 to estimate unknown multivariate EV and GP dfs. We assume that the dependence structure of a multivariate Gaussian df ΦΣ is still valid, however (cf. (11.4)), with mean vector zero and covariance matrix Σ, the univariate margins are unknown dfs Fj , say. Thus, we assume that the T –day log-returns R(T,j) have the joint df F (x) = ΦΣ Φ−1 (F1 (x1 )), . . . , Φ−1 (Fd (xd )) , (16.18)

16.5. Evaluating the Value–at–Risk (VaR)

389

and Φ−1 is the univariate stanwhere Σ is the correlation matrix pertaining to Σ dard Gaussian qf. Notice that the preceding variance–covariance model is a special case with Fj being a Gaussian df with scale parameters σj . We discuss further possibilities. • De Raaij and Raunig11 report a successful implementation of mixtures of two Gaussian dfs (also see pages 31 and 380). • If one goes one step further and is continuously mixing Gaussian distributions with respect to a gamma distribution, one arrives at a Student distribution (cf. (6.16) and page 380). The careful univariate extreme value analysis in Section 16.3 speaks in favor of such dfs which have Pareto–like tails. • Further possibilities include sum–stable dfs yet, as mentioned before, this conﬂicts with the empirical evidence that log–returns exhibit bounded second moments. The df in (16.18) can be estimated by applying the piecing–together method (used to estimate multivariate EV and GP dfs). 1. Estimate the df Fj by means of Fj based on the univariate data xi,j in the jth component; 2. transform the data xi,j to

yi,j = Φ−1 Fj (xi,j ) which may be regarded as data governed by ΦΣ ; based on the transformed 3. estimate Σ by the sample correlation matrix Σ data yi,j , 4. take

−1 (F1 (x1 )), . . . , Φ−1 (Fd (xd )) F (x) = ΦΣ Φ

(16.19)

as an estimate of F (x). For an application we refer to Example 10.3.1 where the copula method led to a curious modeling. Using the tools from multivariate extreme value analysis, one should also analyze the validity of the chosen copula function. Further candidates of copula functions are, e.g., those pertaining to multivariate sum–stable or Student distributions. 11 Raaij,

de G. and Raunig, B. (1999). Value at risk approaches in the case of fat–tailed distributions of risk factors. Manuscript, Central Bank of Austria.

390

16. Extreme Returns in Asset Prices

Estimating the VaR for a Portfolio: a Multivariate Student Modeling We extend the variance–covariance method to multivariate Student distributions. The loss LT of a portfolio at time T is again represented by V0 wR(T ) as in (16.16). Now we assume that the T –day log–returns RT,j , j ≤ d, are jointly Student distributed with shape parameter α > 0 and parameter matrix Σ, see (11.11) and (11.12). Therefore, the log–returns have the representations RT,j =

Xj , (2Y /α)1/2

where the Xj are jointly Gaussian with covariance matrix Σ. Consequently,

wR(T ) =

X , (2Y /α)1/2

√ where X is Gaussian with standard deviation σT = wΣT w corresponding to (16.17), and LT is a Student variable with shape parameter α > 0 and scale parameter V0 σT . Therefore, one gets the Value–at–Risk VaR(T, q) = V0 σT Fα−1 (q), where Fα denotes the standard Student df with shape parameter α. One gets the variance–covariance result in the limit as α → ∞. The extended model is more ﬂexible compared to the Gaussian model and includes the case of heavy–tailed distributions. There is still the restriction of equal shape parameters in the single components.

Capital–at–Risk (CaR) for a Single Asset In the preceding lines the VaR was computed as the limit l such that P {LT ≤ l} = q, where LT is the loss/proﬁt variable for the period t = 0 and t = T . Conversely, one may ﬁx the limit l and compute the Capital–at–Risk CaR(T, q, l) as the amount which can be invested such that the pertaining loss LT does not exceed the limit l with a given probability q. Using the representation (16.13) of the loss/proﬁt variable LT with V0 replaced by CaR(T, q, l), one gets ≤l Rt P {LT ≤ l} = P CaR(T, q, l) 1 − exp t≤T

=

q,

if CaR(T, q, l) = ≈

l/ 1 − exp − FT−1 (q)

l/FT−1 (q).

16.5. Evaluating the Value–at–Risk (VaR)

391

Here, FT is again the df of the T –day return t≤T (−Rt ) with changed sign (see (16.12)). The ratio (16.20) c(T, q) = 1/FT−1 (q) is the capital/loss coeﬃcient. Example 16.5.2. (Capital/Loss Coeﬃcient for the Standard & Poors Index.) The capital/loss coeﬃcient c(T, q) is estimated for T = 1 and T = 30 based on the 9314 equally distributed daily returns to the Standard & Poors Index. Apparently, one must estimate the q–quantile of FT . It is evident from (16.20) that the capital/loss coeﬃcients are just the reciprocals of the values computed for the VaR in Table 16.6. Table 16.8. Estimating the Capital/Loss Coeﬃcient for the Standard & Poors Index. Capital/Loss Coeﬃcient c(T, q) probability q

0.99

0.995

0.999

0.9995

T =1

58.1

50.0

30.3

24.4

T = 30

7.8

5.9

3.0

2.3

It is diﬃcult, due to medium sample sizes, to extend the empirical approach to estimating the capital/loss coeﬃcient beyond a period of a month.

Capital–at–Risk for a Portfolio Let H0 be an initial market strategy which determines the proportions of the diﬀerent assets to each other. Let again Vt,j = H0,j Pt,j and Vt = j Vt,j be the market values of the single assets and of the portfolio with respect to H0 . We compute a constant b such that the loss/proﬁt variable LT for the period from t = 0 to t = T , belonging to the multiple bH0 of the initial market strategy, fulﬁlls the equation

≤l P {LT ≤ l} = P b V0,j 1 − exp Rt,j j

=

t≤T

q.

−1 −1 (q), where FT,H is the df of This holds with b = l FT,H 0 0

j

V0,j 1 − exp Rt,j . t≤T

392

16. Extreme Returns in Asset Prices

Therefore,

−1 CaR(T, q, l) = bV0 = lV0 FT,H (q) 0

is the Capital–at–Risk at the probability q.

16.6

The VaR for a Single Derivative Contract

We start with a short introduction to derivative contracts with special emphasis laid on European call options, deduce the VaR for the call option under the Black–Scholes pricing and conclude the section with remarks concerning the general situation.

An Introduction to Derivative Contracts A derivative contract is a contract, the value of which is dependent on the value of another asset, called the underlying. Options are a special kind of derivative contracts, because these depend non–linearly on the value of the underlying. Options are traded on many underlyings such as single stocks, stock indices, exchange rates, etc. We concentrate on an option for which the underlying is a non–dividend paying stock. There are two basic types of options. A European call option (respectively, a put option) gives the owner the right to buy (to sell) the underlying asset by a certain future date T for a preﬁxed price X, where • T is the expiration date or maturity, • X is the strike price. The prices and returns of the underlying are again denoted by St and Rt . At maturity T the value of a European call option (called payoﬀ) will be the amount PF = max(ST − X, 0), (16.21) by which the stock price ST exceeds the strike price X. The value for the put option is PF = max(X − ST , 0).

The Black–Scholes Prices for European Call Options A call option becomes more valuable as the stock price increases. The opposite holds for put options. The present value (at time t) of the option could be determined through discounting the payoﬀ. However, ST in (16.21) is unknown at time t < T , and one has to use a diﬀerent market price. Within the continuous–time version of the model presented in (16.3), in case the underlying is not dividend paying, this is the Black–Scholes price C(St , T − t)

:= St Φ d1 (St , T − t) − X exp − r(T − t) Φ d2 (St (T − t) , (16.22)

16.6. The VaR for a Single Derivative Contract

393

where r is the annual risk–free rate of interest, T − t is the number of calendar days until expiration, 2 log SXt + r + σ2 (T − t) √ √ and d2 (St , T − t) = d1 − σ T − t. d1 (St , T − t) = σ T −t We have St+1 = St exp(µ + σW ), where W is a standard Gaussian random variable. For simplicity, we assume that µ = 0. Therefore, σW is the log–return for the given time period. More precisely, one must deal with the conditional distribution of St+1 conditioned on st because the price st is known at time t, yet this leads to the same result. The proﬁt/loss (again with a conversed sign) for the period from t to t + 1 is

(16.23) L = − C(St+1 , T − t − 1) − C(St , T − t) . Therefore, the Value–at–Risk VaR(q) at the level q is the q-quantile of the distribution of L. We have P {L ≤ VaR(q)} = q corresponding to (16.11). We compute the VaR by means of linearization and also show that a direct computation is possible for the simple case of a call option.

Computation of the VaR by Linearization (Delta Method) We deduce an approximate representation of the loss variable in (16.23) which is linear in the log–return variable σW of the underlying. From the fact that

sϕ d1 (s, T − t) − X exp(−r(Tt ))ϕ d2 (s, T − t) = 0 one gets

∂ C(s, T − t) = Φ d1 (s, T − t) =: ∆(s, T − t) ∂s which is called the ∆ of the option. Therefore, a Taylor expansion about St yields that L ≈ = ≈

∆(St , T − t)(St − St+1 ) St ∆(St , T − t)(1 − exp(σW )) St ∆(St , T − t)σW.

(16.24)

Using the last expression for the loss variable one gets VaR(q) = St ∆(St , T − t)σΦ−1 (q)

(16.25)

for the one–day Value–at–Risk at the level q. A more accurate linear approximation can be achieved when the linear term depending on the partial derivative (∂/∂t)C(s, t) is added. This kind of approach will underperform when more complicated kinds of derivatives are considered or when the underlying is highly non–normal.

394

16. Extreme Returns in Asset Prices

Direct Computation of the VaR The Black–Scholes formula for a call option can be also used to compute the VaR directly, because the price of the option is strictly increasing in the price of the underlying. The exact solution is

VaR(q) = C St , T − t − C St exp(−σΦ−1 (q), T − t − 1) .

(16.26)

We remark that (16.25) can also be deduced from this formula. In the case of more complex derivatives, when the function C has no simple analytic expression, such an approach can still be used, and the VaR can be found by numerical approximation.

Computing the Black–Scholes Price The preceding arguments heavily rely on the Black–Scholes pricing formula as speciﬁed in (16.22). We indicate in which manner this price for the European call option and other derivative contracts can be determined. This enables us to compute the VaR as well for other derivative contracts. Under the conditions of the Black–Scholes model (16.3) we have ST = St exp µ(T − t) + σ

T

Wk

k=t+1

with St being observed at time t. Let r be the annual risk–free rate of interest. In addition, assume that E(ST /St ) = exp(r(T − t)).

(16.27)

Thus, the expected return of the speculative asset corresponds to the risk–free rate of interest. Under this additional condition one obtains the equality

C(St , T − t) = E max(ST − X, 0) exp(−r(T − t)) between the discounted expected option payoﬀ and the Black–Scholes price. Without condition (16.27), the Black–Scholes price can still be justiﬁed as a fair price by using the concept of hedge portfolios. Moreover, under certain regularity conditions, the fair price of any derivative contract can be computed by calculating the discounted expected value of the option payoﬀ PF with respect to the risk-neutral probability, also called the equivalent martingale measure. Thereby, the original probability measure is replaced by another one under which the process of payoﬀs becomes a martingale. Yet, both probability measures coincide, if condition (16.27) is valid.

16.7. GARCH and Stochastic Volatility Structures

395

Value–at–Risk for General Derivative Contracts For general derivative contracts we also obtain by C(St , T − t) = E PF exp(−r(T − t))

(16.28)

the fair price, if the expectation is taken under the risk–neutral probability. The proﬁt/loss with conversed sign is given in analogy to (16.23). One may try to apply the delta method or to carry out a direct computation of the VaR. Another possibility is to use intensive simulation procedures, such as Monte Carlo or bootstraps, to compute the expected value of the payoﬀ. For details we refer to Caserta et al.12 .

16.7

GARCH and Stochastic Volatility Structures

The aim of this section is to provide some theoretical insight in the tail–behavior of return distributions and to start a discussion about a semiparametric estimation of the VaR and the capital/loss coeﬃcient. We primarily deal with time series {Xk } that possess an ARCH (autoregressive conditional heterosketastic)13 structure or, by generalizing this concept, a GARCH14 structure. We also mention stochastic volatility (SV) models which provide alternative models for the volatility in returns series. First, we review some basic facts of the conditioning concept as outlined in Section 8.1. Recall that the mean and the variance of the conditional distribution are the conditional expectation E(Y |x) and the conditional variance V (Y |x) of Y given X = x.

Modeling the Conditional Heteroskedasticity and Distributions of Returns Assume that the random return Rt at time t can be expressed as Rt = σ ˜ t εt ,

(16.29)

where εt is a random innovation with E(εt ) = 0 and V (εt ) = 1, and σ ˜t > 0 is a random variable with ﬁnite expectation being independent of εt (and depending on the past). Values of σ ˜t are denoted by σt . 12 Caserta, S., Dan´ ıelsson, J. and de Vries, C.G. (1998). Abnormal returns, risk, and options in large data sets. Statistica Neerlandica 52, 324–335. 13 Engle, R.F. (1982). Autoregressive conditional heteroscedasticity with estimates of the variance of United Kingdom inﬂation. Econometrica 50, 987–1007. 14

Bollerslev, T. (1986). Generalized autoregressive conditional heteroskedasticity. J. Econometrics 31, 307–327.

396

16. Extreme Returns in Asset Prices

Because of the independence of σ ˜t and εt , the conditional distribution of Rt given σ ˜t = σt is the distribution of σt εt , see (8.13). In the present context, σ ˜t2 is also addressed as random variance or volatility. Under the conditions above we have (i) E(Rt |σt ) = 0; (ii) V (Rt |σt ) = σt2 . Thus, the conditional variance is not a ﬁxed constant, a property addressed as conditional heteroskedasticity. In addition, (iii) E(Rt ) = 0;

2 (iv) V (Rt ) = E σ ˜t .

Later on, further conditions will be imposed on σ ˜t and εt so that {Rt } is a martingale innovation scheme and, hence, a series of uncorrelated random variables. Notice that the distribution of σ ˜t εt is the mixture of the distributions σt εt with respect to the distribution of σ ˜t . We mention three examples of innovations ˜t : εt and random scale parameters σ • (Normal Innovations.) If εt is standard normal and 1/˜ σt2 is a gamma random ˜t εt has the variable with shape parameter r > 0 (see (4.6)), then Rt = σ density gr which is the Student density as deduced in (6.16). • (Laplace Innovations.) If εt is a Laplace (double–exponential) random variable with density f (x) = exp(−|x|)/2 and 1/˜ σt is a gamma random variable with shape parameter r, then Rt = σ ˜t εt is a double–Pareto random variable with density (cf. also (5.28)) ∞ (ϑ/2) exp(−|x|)hr (ϑ) dϑ gr (x) = 0

= r(1 + |x|)1+r /2.

(16.30)

• (Log–Normal Innovations.) If σ ˜t and εt are log–normal, then Rt is log– normal.

ARCH(1) Series The following scheme captures both the martingale feature and the observed clusters of volatility in speculative return series. These clusters are well described analytically, but not well understood from the economic point of view15 . 15 See,

e.g., Vries, de C.G. (1994). Stylized facts of nominal exchange rate returns. In: The Handbook of International Economics, R. van der Ploeg (ed.), Blackwell, Oxford, pp. 335–389.

16.7. GARCH and Stochastic Volatility Structures

397

Let {εt } be a white–noise process of iid random variables satisfying the conditions E(εt ) = 0 and E(ε2t ) = 1. Let R0 be an initial random variable which is independent of the innovations εt . Then, Rt = σ ˜t εt with 2 , σ ˜t2 = α0 + α1 Rt−1

t ≥ 1,

(16.31)

and α0 , α1 > 0, is an ARCH(1) series. Notice that the conditions, speciﬁed in (16.29), are valid. We discuss some properties of the series {Rt }. Because the εt and Rt−i are independent for each i ≥ 1, the Rt are uncorrelated with expectations E(Rt ) = 0 and variances V (Rt ) = α0

t−1

αj1

+ αt1 V (R0 )

j=0

1 − αt1 + αt1 V (R0 ), = α0 1 − α1

(16.32)

where one must assume that α1 = 1 in the second representation. If α1 < 1, then V (Rt ) → α0 /(1 − α1 ),

t → ∞,

and the ARCH series approximately satisﬁes the condition of weak stationarity. If, in addition, V (R0 ) = α0 /(1 − α1 ), then V (Rt ) = V (R0 ) and {Rt } is a white–noise process. We remark that white–noise processes of this type are taken to model innovations in certain economic time series. The special properties of the ARCH process are due to the fact that the Rt are uncorrelated yet not independent. As a consequence of (8.13), the conditional distribution of Rt given Rt−1 = rt−1 is the distribution of σ(rt−1 )εt ,

(16.33)

where σ(r) = (α0 + α1 r2 )1/2 . This is also the conditional distribution of Rt given the past Rt−1 = rt−1 , . . . , R0 = r0 up to time zero. Especially, the property E(Rt |rt−1 , . . . , r0 ) = 0 of martingale innovations holds. In addition, it is evident that E(Rt |rt−1 ) = 0 and V (Rt |rt−1 ) = σ 2 (rt−1 ).

398

16. Extreme Returns in Asset Prices

Extremal Properties of ARCH Series The distributional properties of the ARCH series are best analyzed by viewing the squared ARCH series Rt2 as a stochastic diﬀerence equation. From (16.31) and (16.29) we obtain Rt2

2 = α0 ε2t + α1 ε2t Rt−1 2 , = Bt + At Rt−1

(16.34)

say. This stochastic diﬀerence equation with iid pairs (Bt , At ) is equivalent to the ARCH series up to a coin ﬂip process for the sign. If E(log A1 ) < 0, and if there is a κ such that E(Aκ1 ) = 1, E(Aκ1 log A1 ) < ∞, 0 < E(B1κ ) < ∞ and B1 /(1 − A1 ) is nondegenerate, then

2 Rt2 → R∞ = Bj Ai , t→∞ (16.35) j<∞

i≤j−1

in distribution. 2 Furthermore, R∞ has a Pareto like tail with tail index κ, that is, 2 P {R∞ > x} = (1 + o(1))cx−κ .

Note that this latter conclusion still follows if the innovations εt have a light tail. 2 For example, if the εt are iid standard normal, the tail index κ for R∞ can be κ computed from the condition that E(A1 ) = 1. We have Γ(κ + 1/2) = π 1/2 (2α1 )−κ . For more details and references to the literature see de Haan et al.16 and Basrak et al.17

Conditional Densities, Quasi Maximum Likelihood Estimation The question of estimating the tails of the unconditional distribution of Rt was already dealt with in the preceding section. Presently, this distribution (more precisely, the sequence of distributions) is regarded as a nuisance parameter. The aim is to estimate the parameters α0 and α1 . We brieﬂy indicate that the maximum likelihood principle is applicable by computing the joint density of the returns. 16 Haan,

de L., Resnick, S.I., Rootz´en, H. and Vries, de C.G. (1990). Extremal behavior of solutions to a stochastic diﬀerence equation with applications to ARCH–processes. Stoch. Proc. Appl. 32, 214–224. 17 Basrak,

B., Davis, R.A. and Mikosch, T. (2002). Regular variation of GARCH processes. Stoch. Proc. Appl. 99, 95–115.

16.7. GARCH and Stochastic Volatility Structures

399

Let f be the density of the innovation εt , and let f0 be the density of the initial random variable R0 . According to (16.33), the conditional density of Rt given Rt−1 = rt−1 , . . . , R0 = r0 (which is also the conditional density of Rt given Rt−1 = rt−1 ) is rt 1 f , (16.36) ft (rt |rt−1 , . . . , r0 ) = ft (rt |rt−1 ) = σ(rt−1 ) σ(rt−1 ) where σ(r) = (α0 + α1 r2 )1/2 . Therefore, the joint density of R0 , . . . , Rt is fs (rs |rs−1 ) (16.37) f (r0 , . . . , rt ) = f0 (r0 ) s≤t

according to (8.11). It is well–known that consistent estimators of α0 and α1 are obtained by maximizing the likelihood function based on (16.37), whereby the term f0 (r0 ) can be omitted; that is, one is maximizing a conditional likelihood function. Moreover, the unknown density f of the innovations is replaced by the normal one.

The Extension to ARCH(p) Series A ﬁrst extension of an ARCH(1) series is achieved, if the stochastic volatility is of the form

2 αi Rt−i (16.38) σ ˜t2 = α0 + i≤p

with innovations εt being independent of the past random variables R1−i , i = 1, . . . , p. Repeating the arguments in (16.33) one may verify that the conditional distribution of Rt given Rt−1 = rt−1 , . . . , Rt−p = rt−p is the distribution of σ(rt−1 , . . . , rt−p )εt , where σ(rt−1 , . . . , rt−p ) = (α0 +

(16.39)

2 αi rt−i )1/2 .

i≤p

In (16.39) one also gets the conditional distribution of Rt given the past Rt−1 = rt−1 , . . . , R1−p = r1−p up to time 1 − p. Extending (16.36) and (16.37), one gets the conditional densities ft (rt |rt−1 , . . . , r1−p ) = =

ft (rt |rt−1 , . . . , rt−p ) (16.40) rt 1 f , σ(rt−1 , . . . , rt−p ) σ(rt−1 , . . . , rt−p )

and the joint density f (r1−p , . . . , rt ) = f0 (r1−p , . . . , r0 )

s≤t

of the returns Rt .

fs (rs |rs−1 , . . . , rs−p )

(16.41)

400

16. Extreme Returns in Asset Prices

Stochastic Volatility (VS) Models Let again Rt = σ ˜t εt as in (16.29). In contrast to ARCH models we assume that σt } be an AR series the series {˜ σt } and {εt } are independent. For example, let {˜ of the form

2 + ηt , (16.42) βj σ ˜t−j σ ˜t2 = β0 + j≤q

where {ηt } is another innovation series. This is the product series model as dealt with in [54]. Another example is obtained if {˜ σt } is deﬁned by means of an MA(∞) series. Let

∞ 2 ψj ηt−j . σ ˜t = c exp (16.43) j=0

Asymptotic results of extremes of such processes are obtained by F.J. Breidt and R.A. Davis18 .

The Extension to GARCH(p, q) Series An extension of the concept of an ARCH series is achieved, if

2 2 αi Rt−i + βj σ ˜t−j , t ≥ 1. σ ˜t2 = α0 + i≤p

(16.44)

j≤q

˜t εt , t ≥ 1, is a GARCH(p, q) (a generalized ARCH) series. Notice Then, Rt = σ that a GARCH(p, 0) series is an ARCH(p) series. Thus, the extension is related to the step from an AR to an ARMA series. The RiskMetricsT M (RM) method deals with GARCH(1, 1) series. RM is concerned with the calculation of the Value–at–Risk for a portfolio consisting of up to more than 450 assets. Market position, for example, can be entered through the RM interface and, then, the VaR will be provided. The basic idea used by RM is that daily log–returns of an asset have zero mean and are generated according to a non–stationary GARCH(1, 1) series Rt = σ ˜ t εt , where the εt are iid standard normal innovations and 2 2 σ ˜t2 = (1 − λ)Rt−1 + λ˜ σt−1 .

Using past log–returns on the asset it is possible to forecast the volatility of the daily return for the next day which in turn can be used to compute the one–day VaR. 18 Breidt,

F.J. and Davis, R.A. (1998). Extremes of stochastic volatility models. Ann. Appl. Probab. 8, 664–675.

16.8. Predicting the Serial Conditional VaR

401

The RiskMetricsT M speciﬁcation for λ, called the decay factor, is 0.94 for daily returns. This determination is based on minimization of the mean square variance forecast error with respect to λ for a number of asset returns. The decay factor is then a weighted average of individual optimal decay factors, see J.P. Morgan Bank19 for details.

16.8

Predicting the Serial Conditional VaR co–authored by A. Kozek20 and C.S. Wehn21

In the preceding sections, we primarily studied the estimation of the Value–at– Risk (VaR) as a quantile of a stationary distribution of the loss variable Lt . In the conditional set–up, the VaR is a conditional quantile, cf. Section 8.1, which should be predicted based on observable quantities. In the time series framework, we speak of a serial conditional quantile, cf. Section 8.3, and, therefore, also of a serial conditional VaR. At the end of Section 9.5, we already mentioned a covariate conditional VaR. The present section focuses on the serial conditioning within GARCH models. A more general formulation in terms of both serial and covariate information is possible, yet not considered in this book. McNeil et al.22 argue that both approaches, the unconditional as well as the conditional one, are relevant for risk management purposes. However, in view of the fact that most empirical time series used in market risk modeling experience non–stationarity and certain heteroskedastic properties, the conditional approach is particularily relevant in market risk modeling.

The Serial Conditional VaR Let again Lt = −(Vt − Vt−1 ) be the loss (proﬁt/loss) variable at time t pertaining to the market values Vt−1 = hSt−1 and Vt = hSt , where h is the ﬁxed number of shares (the portfolio position), and St is the price at time t. Denote again by Rt = log St − log St−1 = log Vt − log Vt−1 the log–return at time t. The serial conditional VaR at the level q is the conditional q–quantile VaR(q; rt−1 , rt−2 , . . .) := q(Lt |rt−1 , rt−2 , . . .),

(16.45)

19 J.P. Morgan (1996). RiskMetrics Technical Document (4th ed.). J.P. Morgan Bank, New York. 20 Macquarie

University, Sydney

21 DekaBank,

Frankfurt am Main

22 McNeil,

A.J., Frey, R., Embrechts, P. (2005). Quantitative Risk Management— Concepts, Techniques, Tools. Princeton University Press, Princeton.

402

16. Extreme Returns in Asset Prices

as mentioned in (8.21), of the loss variable Lt given the past returns rt−1 , rt−2 , . . .; thus, q(Lt |rt−1 , rt−2 , . . .) is the q–quantile of the conditional distribution of Lt given Rt−1 = rt−1 , Rt−2 = rt−2 , . . .. As in (16.6) one gets the representation Lt

= Vt−1 (1 − exp(Rt )) ≈ −Vt−1 Rt .

(16.46)

In view of (16.46), one may replace in (16.45) the loss variable Lt by the approximate value −Vt−1 Rt . Notice that the past market value Vt−1 ≡ Vt−1 (Rt−1 , Rt−2 , . . .) is a non– random function of the past returns Rt−i , and Vt−1 itself is known at time t − 1. To some larger extent, we suppress the dependency on some unknown initial values or random variables in our notation when time series are studied. In practical situations, the modeling of loss variables becomes even more complicated. We mention two important extensions: 1. A trading portfolio usually consists of a larger number of assets. Therefore, one has to consider the corresponding multivariate question. 2. The portfolio positions h = ht vary from one day to another, where ht is the position in the asset Vt at time t. The assumption that the process ht merely depends on the past returns Rt−1 , Rt−2 , . . . ensures that our analysis can be easily extended to time varying portfolio weights.

GARCH Models for the Returns, Again The statistical modeling of the loss distribution is again formulated in terms of the log–returns Rt . As in (16.29) let ˜ t εt , Rt = σ

t ≥ 1,

where the εt are iid random innovations, and εt is independent of the random scale parameter σ ˜t . Because we are merely interested in q–quantiles of conditional distributions we do not necessarily impose any conditions on the moments of εt . Therefore, we also speak of a random scale parameter instead of a stochastic volatility. Speciﬁcally, we assume that σ ˜t = σ(Rt−1 , Rt−2 , . . .) and, hence, t ≥ 1,

Rt = σ(Rt−1 , Rt−2 , . . .)εt ,

(16.47)

where εt is independent of the past returns Rt−1 , Rt−2 , . . ., and, consequently, the innovation εt is independent of the random scale parameter. For the ARCH(p) series in (16.38) we have

2 αi Rt−i . (16.48) σ 2 (Rt−1 , Rt−2 , . . .) = α0 + i≤p

16.8. Predicting the Serial Conditional VaR

403

For the GARCH(p, q) series in (16.44) the random scale parameter is recursively deﬁned by

2 σ 2 (Rt−1 , Rt−2 , . . .) = α0 + αi Rt−i + βj σ 2 (Rt−j−1 , Rt−j−2 , . . .). (16.49) i≤p

j≤q

Within the ARCH(p) and GARCH(p, q) series, the distributions of the returns depend on the parameters αi and, respectively, the parameters αi and βj , and the distribution of εt .

Representing GARCH as ARCH Models By induction one gets a representation of σ ˜t2 in terms of the returns Rt , see, e.g. Fan and Yao [18], (4.35). We have σ ˜t2

=

1−

= +

α q0

p

i=1

j=1 βj

αi

+

p

2 αi Rt−i

i=1

q

k≥1 j1 =1

···

q

jk =1

2 βj1 × · · · × βjk Rt−i−j 1 −···−jk

(16.50)

with respect to an inﬁnite past. In practice, one has to use some initial values and a truncation, e.g., by truncating all terms having a non–positive index. As a special case we deduce the representation in the RiskMetricsT M (RM) model of a GARCH(1,1) series, where 2 2 + λ˜ σt−1 , σ ˜t2 = (1 − λ)Rt−1

and the innovations εt are standard normal, cf. Section 16.7, page 400. In that case, we have

2 σ ˜t2 = (1 − λ) λi−1 Rt−i ,

(16.51)

i≥1

which can be addressed as a random scale parameter in an ARCH(∞) series. If λ < 1 it makes sense to take the ﬁrst p terms in the sum, thus, getting an ARCH(p) series, because the deleted returns Rt−p−1 , Rt−p−2 , . . . enter only with very small cumulated weights i≥p+1 λi−1 = λp /(1 − λ). The general strategy is to estimate a smaller number of parameters in a GARCH series, yet to carry out further computations in a related (approximating) ARCH(p) series.

Conditional Distributions in GARCH Series It is evident from (16.47) that the conditional distribution of Rt given Rt−1 = rt−1 , Rt−2 = rt−2 , . . . is the distribution of σ(rt−1 , rt−2 , . . .)εt .

(16.52)

404

16. Extreme Returns in Asset Prices

Alternatively, the conditioning may simultaneously be based on certain past returns and past scale parameters: the conditional distribution of Rt given Rt−1 = rt−1 , . . . , Rt−p = rt−p , σ ˜t−1 = σt−1 , . . . , σ ˜t−q = σt−q is the distribution of σt εt with σt recursively deﬁned by σt2 = α0 +

2 αi rt−i +

i≤p

(16.53)

2 . βj σt−j

j≤q

The results in (16.52) and (16.53) are identical with σt = σ(rt−1 , rt−2 , . . .). Based on these formulas one may write down conditional and joint densities and a likelihood function. In analogy to (16.40) and (16.41), one gets the conditional densities 1 rt , (16.54) ft (rt |rt−1 , rt−2 , . . .) = f σt σt and the joint density f (. . . , rt−1 , rt ) = f0 (. . . , r−1 , r0 )

t 1 rs f σ σs s=1 s

(16.55)

of the returns Rt , t ≥ 1, including some initial values. Likewise the conditional density of R1 , . . . Rt given the initial values is f (r1 , . . . , rt |r0 , r−1 , . . .) =

t 1 rs . f σ σs s=1 s

(16.56)

Now we may build a likelihood function based on the joint density or the conditional likelihood function based on the conditional density (which leads to the same expression if the term depending on f0 is omitted). We provide two examples, namely, the cases where the innovation density f is the standard normal density ϕ or a Student density with shape parameter α. • (Normal innovations.) In Section 16.7 we mentioned the result that returns have Pareto–like tails if the innovations εt are standard normal. Thus, normal innovations do not contradict our ﬁndings in the previous sections which spoke in favor for return distributions with heavy tails such as Student distributions. From (16.56) one easily gets the conditional likelihood function. For the conditional log–likelihood function one gets, l(α, β) =

−

t

s=1

=

log σs +

t

s=1 t

log ϕ(rs /σs )

1 rs2 t log σs − , − log(2π) − 2 2 s=1 σs2 s=1 t

(16.57)

16.8. Predicting the Serial Conditional VaR

405

where the right–hand side depends on the αi and βj via the σs ; next one has to compute the likelihood equations. • (Student innovations.) In the recent ﬁnancial literature one observes a trend to take Student innovations in the GARCH modeling. Simulation studies indicate that this type of modeling for the innovations is compatible to Pareto–distributed returns. More precisely, if the innovations are Studentdistributed, then one may conjecture that the returns are again Student– distributed with a shape parameter smaller than the initial one (personal communication by Petra Schupp). We note the conditional log–likelihood function Γ((α + 1)/2) l(α, β) = t log ' π(α − 2)Γ(α/2) −

t

s=1

r2 α+1

, (16.58) log 1 + 2 s 2 s=1 σs (α − 2) t

log σs −

where we take standardized Student innovations with shape parameter α > 2 to make the result comparable to [18]. Recall from (1.62) that the standard ' deviation is equal to α/(α − 2). We do not know any result for the case of α ≤ 2.

The Serial Predictive Conditional VaR We merely provide details in the special case of the RM model, see (16.51), where the innovation df F is the standard normal df Φ. ˆ = 0.94 be the speciﬁcation of the paWithin the RM modeling let again λ rameter λ in the GARCH model as provided by RM (or some other estimate of λ). The innovations εt are assumed to be distributed according to Φ. Then, one gets the predictor ˆt Φ−1 (q), VaR(q; rt−1 , rt−2 , . . .) = vt−1 σ with σ ˆt =

.

ˆi−1 r2 , ˆ λ (1 − λ) t−i

(16.59)

(16.60)

i≥1

of the conditional Value–at–Risk VaR(q; rt−1 , rt−2 , . . .) based on the observed market value vt−1 , and the past observed returns rt−i , where one only takes the ﬁrst p terms in the sum. It is worthwhile to reconsider all the steps which led to the prediction of the serial conditional VaR (as the conditional q–quantile of the loss variable Lt conditioned on the past returns): 1. replace the loss variable Lt by −Vt−1 Rt

406

16. Extreme Returns in Asset Prices

˜t εt with iid innovations εt for the returns; 2. take a model Rt = σ 3. specialize this model further to a GARCH model like the RM model; 4. replace unknown parameters like the λ by estimates based on observable quantities (or by a value provided, e.g., by J.P. Morgan); 5. ﬁx a df for the innovation εt ; 6. take an appropriate smaller number p of terms in the sum of the random scale parameter which is the step from the GARCH model to a ARCH(p) model, 7. take the conditional q–quantile within this ﬁnal model as a predictor of the serial conditional VaR. The conditional distribution in step 6, with the unknown paramters replaced by estimates, may be addressed as a predictive distribution (as introduced in Section 8.1, page 237). One may also speak of a serial predictive VaR as a predictor of the serial conditional VaR. In view of the longer list of conditions and approximations, one may ask after the accuracy of the prediction by means of this predictive VaR. In this context, the steps 2 to 5, which concern the statistical modeling and the estimation of unknown parameters, are of particular interest. Later on, we indicate a validation of the GARCH modeling by using the Rosenblatt transformation and, respectively, certain residuals.

Predicting the Serial Conditional Expected Shortfall The predictive df F (l|rt−1 , rt−2 , . . .) = Φ(l/(vt−1 σˆt )

(16.61)

in (16.59) for the loss variable Lt provides more than a predictor of the serial conditional VaR. For example, in place of a q–quantile we may use a diﬀerent functional parameter such as the expected shortfall (which itself is frequently called conditional VaR in the literature; we hope that no confusion will arise due to this ambiguity). The serial conditional expected shortfall may be predicted by plugging in the predictive df. Other possible applications concern predictive intervals.

Validation for the GARCH Modeling by Using the Rosenblatt Transformation In the preceding sections, we employed exploratory tools to analyze ﬁnancial data according to their postulated stationary distribution or their martingal (correlation) structure. To make tests applicable (if dependencies cannot be neclected),

16.8. Predicting the Serial Conditional VaR

407

one needs complex theoretical results as, e.g., those developed in Chapter 7. Alternatively, standard tests can be applied to transformed data. If the data come from independent, not necessarily identically distributed (innid) random variables, then the simple probability transformation helps to produce iid (0,1)–uniform data. Otherwise, as, e.g., in the GARCH case, one can use the Rosenblatt transformation, see (8.29). In the present context, the Rosenblatt transformation was applied by Diebold et al. (in the article cited on page 238). We want to know whether the GARCH modeling for the returns series Rt and the estimation procedures can be justiﬁed. Let Ft (·|rt−1 , rt−2 , . . .) = F (·/σ(rt−1 , rt−2 , . . .)) be the conditional df of Rt given Rt−1 = rt−1 , Rt−2 = rt−2 , . . ., where F is the common df of the innovations εt , see (16.52). It is understood that unknown parameters in the conditional dfs are replaced by estimates based on the returns. Thus, one is using the predictive dfs (the “estimated conditional dfs”) instead of the actual conditional dfs in the Rosenblatt transformation. Diebold et al. also compute the joint density of the transformed random variables when predictive dfs in place of actual conditional dfs are applied in the transformation. According to the Rosenblatt transformation, the yt = Ft (rt |rt−1 , rt−2 , . . .) may be regarded as iid (0, 1)–uniform data if the predictive dfs are suﬃciently accurate. Now, the distributional properties as well as the serial independence can be analyzed. If, e.g., a test procedure rejects one of these properties then it is likely that one of our basic conditions is violated (or our estimation procedures in the GARCH model are not suﬃciently accurate). Diebold et al. argue in favor of exploratory analysis (just in the spirit of larger parts of the present book): • ... when rejection occurs, the tests generally provide no guidance as to why. • ... even if we know that rejection comes from violation of uniformity, we’d like to know more: What, precisely, is the nature of violation ... • Is the dependence strong and important, or is iid an adequate approximation, even if strictly false? They come to the conclusion: “The nonconstructive nature of tests of iid U(0,1) behavior, and the nonconstructive nature of related separate tests of iid and U(0,1), make us eager to adopt more revealing methods of exploratory data analysis.” The authors analyze the transformed data by means of histograms and sample autocorrelation functions. The latter tool is also applied to powers of centered data.

408

16. Extreme Returns in Asset Prices

In simulation studies, they generate the data according to a GARCH(1,1) series (the data generating process) given by 2 2 σ ˜t2 = 0.01 + 0.13 × Rt−1 + 0.86 × σ ˜t−1

(16.62)

which is close to the RM model. Yet, in place of standard normal innovations, these authors take standardized Student variables with shape parameter α = 6 (six degrees of freedom). For ' the standardization one has to use the standard deviation which is equal to 3/2 for α = 6, see (1.62) and (16.58). The Rosenblatt transformation is carried out under the following sequences of predictive distributions: • a sequence of iid standard normal or non–normal random variables; • a GARCH(1,1) series with normal innovations, • the correct model (with estimated parameters). Diebold et al. conclude that “our density forecast evaluation procedures clearly and correctly revealed the strength and weakness of the various density forecasts.” A real data set of daily S&P returns is also analyzed within the framework of MA(1)–GARCH(1,1) model (again with Student innovations). Despite the arguments above, we mention some test procedures which are employed for testing the simple null–hypothesis of iid (0, 1)–uniform random variables. One may apply goodness–of–ﬁt tests such as χ2 or Kolmogorov–Smirnov tests. Likelihood–ratio tests may be applied to a binomially distributed number of exceedances, see Kupiec23 . The Kupiec test can be regarded as a two–sided extension of the traﬃc light approach. The traﬃc light approach is a binomial test based on the exceedances of the serial conditional VaR, i.e., marks in time, where the observed losses exceed the respective predicted VaR. By the Rosenblatt transformation it is ensured that these exceedances are binomially distributed if the serial conditional df is appropriately selected. This binomial test is especially relevant for regulatory purposes24 . Another useful reference in the context of testing the conditional modeling is Berkowitz25. By statistical tests or explorative means like QQ–plot, PP–plot, histograms or autocorrelation functions, it is possible to iterate the diﬀerent steps 1–7 above that 23 Kupiec, P.H. (1995). Techniques for verifying the accuracy of risk measurement models. J. Derivatives 2, 73–84. 24 Basel

Committee on Banking Supervision: Supervisory Framework for ‘Backtesting’ in conjunction with the Internal Models Approach to Market Risk Capital Requirements, 1996. 25 Berkowitz,

J. (2001). Testing density forecasts, with applications to risk management, J. Business & Economic Statistics 19, 465–474.

16.8. Predicting the Serial Conditional VaR

409

led to the respective dfs26 . If there is a signiﬁcant serial correlation identiﬁed (or a signiﬁcant autocorrelation of the squared returns), the speciﬁed GARCH/ARCH– model can be improved and, in addition, the estimated parameters should be reviewed (steps 3, 4 and 6 of the loss variable speciﬁcation steps). If the distributional properties do not ﬁt well (which again is explored by statistical or graphical means), the ﬁxed df for the innovations is questionable (step 5). This procedure is called the “backtesting” of the risk model and should be conducted regularily to improve stepwise and iteratively the chosen model and its assumptions. These pragmatic procedures can as well be employed in the case of multivariate asset returns and for time varying portfolio weights ht (mentioned at the beginning of this section).

Validation for the GARCH Modeling by Using Residuals Fan and Yao [18] analyze daily S&P returns (diﬀerent from the one used by Diebold et al.) with a modeling of the innovations by Student distributions. Applying the conditional likelihood method these authors get the following GARCH(1,1) series (with estimated parameters) 2 2 + 0.945 × σ ˆt−1 σ ˆt2 = 0.007 + 0.047 × rt−1

with an additional estimated shape parameter α = 7.41 of the Student distribution. The validation for the GARCH modeling is based on the residuals εˆs = rs /ˆ σs ,

s ≥ 1.

(16.63)

One can expect that the residuals εˆs have properties as the innovations εs to some extent. Fan and Yao apply tests as well as exploratory tools to the residuals and conclude that Student modeling is more agreeable than the normal one. It is reported that there is no signiﬁcant autocorrelation in the residual series and its squared series. These authors also discuss the question of predicting the condiˆt = σ tional VaR based on the distribution of R ˆt εˆt,α , where εˆt,α corresponds to a Student–variable with estimated shape parameter α, and σ ˆt is the predictive scale parameter (with parameters estimated within the GARCH model).

Semiparametric Evaluation of the Conditional Df of Returns We add some remarks about a predictive df of the return Rt within the GARCH setup, where the parameters αi and βj are estimated in a correct manner, yet the validity of the overall parametric modeling of the common innovation df F is questionable. Then, the residuals εˆs may still be regarded as observations under 26 Wehn,

C.S. (2005). Ans¨ atze zur Validierung von Marktrisikomodellen—Systematisierung, Anwendungsm¨ oglichkeiten und Grenzen der Verfahren. Shaker, Aachen.

410

16. Extreme Returns in Asset Prices

F . Therefore, we may estimate F , based on the residuals, by means of the sample df Fˆt−1 or a kernel df Fˆt−1,b with bandwidth b > 0 as deﬁned in (2.17). One may as well apply the extreme value technique to estimate the upper tail of F . By piecing together the predictive scale parameter σ ˆt and the estimates Fˆt−1 ˆ ˆ or Ft−1,b of F , one gets the predictive dfs Ft−1 (·/ˆ σt ) or Fˆt−1,b (·/ˆ σt ) of the return Rt . In order to get a predictive VaR, one has to use quantiles of the predictive dfs. The approach, using the kernel qf introduced below (2.17), would also be an option. In conjunction with the kernel df approach, special reﬁned methods of selecting the quantile are available27 28 .

An Empirical Evaluation of the Conditional Df of Returns Within the ARCH(p) setting we predicted the conditional df Ft (·|rt−1 , . . . , rt−p ) = F (·/σ(rt−1 , . . . , rt−p )) of the return Rt given Rt−1 = rt−1 , . . . , Rt−p = rt−p , where F is the common df of the innovations εt . A predictive version was provided by replacing the unknown parameters αi by estimates α ˆ i based on the past returns. One may ask whether an empirical approach is possible by estimating the conditional df in a direct manner under certain weak assumptions imposed on the time series of returns. There is a positive answer if p is small, yet our answer is negative due to the “curse of dimensionality” for the more interesting case of larger p. For simplicity, we merely give details for p = 1. In view of the corresponding property of an ARCH(1)–series, one may assume that the returns Rt satisfy the technical condition of a Markov chain with stationary transition df F (·|r). In the special case of an ARCH(1)–series we have F (·|r) = F (·/σ(r)). Now we proceed as in Section 8.2 with the iid condition replaced by the Markov condition. Let rt(1) , . . . , rt(k) , 1 < t(j) < t, be the returns in the past for which rt(j)−1 is close to the ﬁxed value r. Then, the rt(j) may be regarded as observations under F (·|r), and the sample df Fk (·|r), based on the rt(j) , as an estimator of the conditional df F (·|r).

27 Kozek, A. (2003). On M–estimators and normal quantiles. Ann. Statist. 31, 1170– 1185. 28 Jaschke,

S., Stahl, G. and Stehle, R. (2006). Value–at–risk forecasts under scrutiny— the German experience. To appear in Quantitative Finance.

Chapter 17

The Impact of Large Claims on Actuarial Decisions co–authored by M. Radtke1

In this chapter, we elaborate on and develop some ideas which were already presented in Section 1.1. Recall that the expectation of the total claim amount determines the net premium. Based on the net premium, the insurer determines the total premium that must be paid by the policy holder. We start in Section 17.1 with the calculation of the df, expectation and variance of the total claim amount. From our viewpoint, reinsurance is of particular interest, because the excesses of large or catastrophic claim sizes over a certain higher threshold are covered by the reinsurer. Special names for threshold are limit, priority or retentation level. One may distinguish between the following reinsurance treaties: • excess–of–loss (XL) reinsurance, when the reinsurer pays the excess of a certain ﬁxed limit for individual claim sizes; • stop–loss reinsurance or total loss insurance, when the reinsurer covers the excess of a certain limit for the total claim amount of an insurer’s portfolio, • ECOMOR reinsurance, which is a modiﬁcation of the XL treaty with the kth largest individual claim size taken as a random limit (thus, the reinsurer only pays excesses of the kth largest claim size). The net premium for the next period can be estimated in a nonparametric manner by means of the total claim amount of preceding periods. It is suggested to also employ a parametric approach in the reinsurance business. 1 K¨ olnische

R¨ uckversicherung; co–authored the ﬁrst edition.

412

17. The Impact of Large Claims on Actuarial Decisions

We merely deal with risks in conjunction with the XL reinsurance treaty. The required modiﬁcations for the ECOMOR treaty are apparent from our viewpoint2 . The restriction to the XL treaty is justiﬁed by the fact that the ECOMOR treaty seems to have less practical relevance. In XL reinsurance, the estimation of the net premium can be done again within the generalized Pareto (GP) model (Section 17.2) or some other statistical model such as the Benktander II or truncated converse Weibull model. The segmentation of a portfolio with respect to the probable maximum loss (PML) of single risks is dealt with in Section 17.3. The segmentation is necessary to adjust the tariﬁcation to the risks of individual policy holders. We pursue an empirical and a parametric statistical approach towards this important question. The parametric one is based on the estimation of the mean of GP distributions. Another important question is the choice of an adequate initial reserve (capital) for a portfolio. We will introduce a concept based on ﬁnite ruin theory (see, e.g., the book by Gerber [22]) in which the initial reserve becomes a parameter which can be estimated by the insurer. For that purpose, one must formulate a certain criterion which determines the initial reserve in a unique manner: we suggest using a T –year initial reserve for a q × 100% ruin probability. This is the initial reserve for a portfolio such that ruin occurs within the next T years with a probability of q × 100%. Reasonable quantities are a time horizon of T = 10 years and a predetermined ruin probability of 1% or 5%. These ideas are pursued in Section 17.4 within the framework of risk processes. This chapter is concluded with some remarks about asymptotic ruin theory (Section 17.5).

17.1

Numbers of Claims and the Total Claim Amount

Let Sn = i≤n Xi denote the total (aggregate) claim amount of the ﬁrst n of the random claims sizes X1 , X2 , X3 , . . . . Then, the total claim amount for a given period can be written

SN = Xi , (17.1) i≤N

where N is the random number of claims occurring within this period. Remember that the expectation E(SN ) of the total claim amount is the net premium that must be estimated by the actuary.

The Total Claims DF The df, expectation and variance of the total claim amount SN will be computed under the conditions of the homogeneous risk model. 2 For

details and further references, see, e.g., Kremer, E. (1992). The total claims amount of largest claims reinsurance revisited. Bl¨ atter DGVM 22, 431–439.

17.1. Numbers of Claims and the Total Claim Amount

413

(Homogeneous Risks Model): the claim sizes X1 , X2 , X3 , . . . are iid random variables with common df F . Additionally, the claim number N and the sequence X1 , X2 , X3 , . . . are independent. With calculations similar to those in (1.54) we obtain for the total claims df P {SN ≤ x}

= =

∞

n=0 ∞

P {SN ≤ x, N = n} P {N = n}F n∗ (x),

(17.2)

n=0

where S0 = 0, F 0∗ (x) = I(0 ≤ x) and F n∗ (x) = P {Sn ≤ x} is the n–fold convolution, cf. page 30, of F again. Next, the total claims df will be written in a more explicit form for binomial, Poisson, negative binomial and geometric claim numbers3 . • (Compound Binomial.) If the number N of claims is a binomial random variable with parameters n and p, then the total claims df is P {SN ≤ x} =

n

Bn,p {k}F k∗ (x).

(17.3)

k=0

• (Compound Poisson.) If the number N of claims is a Poisson random variable with parameter λ, then the total claims df is P {SN ≤ x} =

∞

Pλ {k}F k∗ (x).

(17.4)

k=0

• (Compound Negative Binomial.) If the number N of claims is a negative binomial random variable with parameters r and p, see (3.31), then the total claims df is ∞

− Br,p {k}F k∗ (x). (17.5) P {SN ≤ x} = k=0

• (A Simpliﬁed Representation in the Geometric Case.) If r = 1 in the preceding example, then N is geometric. Thus, P {N = k}

− {k} = B1,p

= p(1 − p)k , 3 Also

k = 0, 1, 2, 3, . . . ,

see Kuon, S., Radtke, M. and Reich, A. (1993). An appropriate way to switch from the individual risk model to the collective one. Astin Bulletin 23, 23–54.

414

17. The Impact of Large Claims on Actuarial Decisions for some p with 0 0. Recall from (4.7) that the convolution F k∗ is a gamma df with density f k∗ (x) = σ −1 (x/σ)k−1 exp(−x/σ)/(k − 1)!,

x > 0.

Check that ∞

p

(1 − p)k f k∗ (x) = σ −1 pe−px/σ , 1−p

x ≥ 0,

k=1

and, hence, equality also holds for the pertaining dfs. By combining this with (17.6), one obtains the representation P {SN ≤ x} = p + (1 − p)(1 − e−px/σ ),

x ≥ 0,

(17.7)

of the total claims df. Next, we verify that the net premium4 —the expectation of the total claim amount—within the given period is E(SN ) = E(X)E(N ),

(17.8)

where X is a random variable with the same distribution as the Xi . Because the random variables Sn and I(N = n) are independent, we have E(SN ) = =

∞

n=0 ∞

E SN I(N = n) E(Sn )E(I(N = n))

n=1

=

E(X)

∞

nP {N = n}

n=1

=

E(X)E(N )

and, thus, (17.8) holds. The variance of SN may be computed in a similar manner. One obtains V (SN ) = V (X)E(N ) + (EX)2 V (N ). 4 For

(17.9)

an elementary introduction to premium principles see Straub, E. (1989). Non–Life Insurance Mathematics. Springer, Berlin.

17.2. Estimation of the Net Premium

17.2

415

Estimation of the Net Premium

The net premium will be estimated in a nonparametric and a parametric manner under various conditions.

Nonparametric Estimation of the Net Premium Assume that the claim arrival times T1 , T2 , T3 , . . . constitute a claim number pro∞ cess N (t) = i=1 I(Ti ≤ t), t ≥ 0, which has a constant arrival rate, that is,

E N (t2 ) − N (t1 ) = (t2 − t1 )E(N (1)), t 1 < t2 . (17.10) The estimation of the net premium E(SN ) for the next period will be based on the total claim amount SN (T ) of the past T years. Under the conditions of the homogeneous risk model, one obtains according to (17.8), E(SN ) = E(N (1))E(X), and, under condition (17.10), E(SN (T ) ) = T E(N (1))E(X). Therefore, SN (T ) /T is an unbiased estimator of the net premium E(SN ). The variance of this estimator can easily be deduced from (17.9). Example 17.2.1. (Large Norwegian Fire Claim Data.) A data set of large ﬁre claim data (stored in the ﬁle it–ﬁre2.dat) was extensively analyzed by R. Schnieper5 . Table 17.1. Fire claims sizes over 22.0 million NKr from 1983 to 1992. year 1983 1984 1986 1987 1988 1989

5 Schnieper,

claim size (in millions) 42.719 105.860 29.172 22.654 61.992 35.000 26.891 25.590 24.130

year

1990

1992

claim size (in millions) 23.208 37.772 34.126 27.990 53.472 36.269 31.088 25.907

R. (1993). Praktische Erfahrungen mit Grossschadenverteilungen. Mitteil. Schweiz. Verein. Versicherungsmath., 149–165.

416

17. The Impact of Large Claims on Actuarial Decisions

The original ﬁre claim data over a priority of 10.0 million NKr (Norwegian crowns) were corrected by means of a certain trend function. The original data are indexed “as if” they occurred in 1993. Table 17.1 contains the corrected data. In addition, the original data were made anonymous so that the portfolio cannot be identiﬁed (personal communication). We estimate the net premium for the excess claim sizes over the given priority of u = 22 million NKr and another one, namely u = 50 million NKr. In the ﬁrst case, the estimation is based on the given 17 claim sizes; in the second case, only 3 claim sizes are available and, thus, the estimate is less reliable. The nonparametric estimates of the net premium (XL) are 26.98 and, respectively, 7.13 million NKr.

If the estimation of the net premium must be based on such a small number of claim sizes as in the preceding example, then a parametric approach should be employed.

Parametric Estimation of the Net Premium for Excess Claims Assume that the arrival times and the claim sizes satisfy the conditions of a Poisson(λ, F ) process, cf. page 248. Notice that λ is the mean number of claims in a period of unit length and F is the df of the excesses over the priority u. We assume that F = Wγ,u,σ is a GP df. The mean claim size E(X) is the mean of the GP df (in the γ–parameterization). The net premium for the next period is E(SN ) = λmWγ,u,σ , where mF again denotes the mean of a df F . Thus, by estimating the parameters λ, γ and σ one obtains an estimate of the net premium. Notice that λN (T ) = N (T )/T is an estimator of λ = E(N ). If γN (T ) and σN (T ) are estimators of the parameters γ and σ, then the mean σN (T ) mN (T ) := u + 1 + γN (T ) of the GP df WγN (T ) ,u,σN (T ) is an estimator of the mean claim size E(X) = mWγ,u,σ . Therefore, λN (T ) mN (T ) is an estimator of the net premium E(SN ). Example 17.2.2. (Continuation of Example 17.2.1.) Apparently, the estimated parameter for the number of claims within a single year—the number of claims divided by the number of years—is λ = 1.7. The parametric estimation of the claim size df was carried out in the GP0, GP1 and GP models with left endpoint u = 22.0. The estimated parameters are listed in Table 17.2. Necessarily, the nonparametric estimate and the MLE in the exponential model (GP0) lead exactly to the same net premium.

17.2. Estimation of the Net Premium

417

Table 17.2. Parametric estimation of the mean claim size (excesses), the net premium (XL) in millions of NKr and nonparametric estimate of net premium (XL). γ–Parameterization γ µ σ nonparametric MLE(GP0) Hill(GP1) MLE(GP) Moment(GP)

– 0.0 0.451 0.254 0.293

– 22.0 22.0 22.0 22.0

– 15.873 9.915 11.948 12.060

Mean Claim Size E(X)

Net Premium (XL) E(SN )

15.87 18.06 16.02 17.06

26.98 26.98 30.70 27.23 29.00

In Fig. 17.1, the sample mean excess functions and the mean excess functions of GP dfs pertaining to the parametric estimates are plotted. These functions are given within the range of 20 to 35 millions NKr. First of all we are interested in the question as to whether the sample mean excess function is suﬃciently close to a straight line so that the GP modeling is acceptable.

25

Fig. 17.1. Sample mean excess function and mean excess functions for Hill(GP1) (solid), Moment(GP) (dashed), MLE(GP) (dotted) and also MLE(GP0) (dashed–dotted).

20

15 25

30

35

claim sizes

A comparison of the mean excess functions leads to the conclusion that a GP modeling is acceptable. In addition, the plots speak in favor of the MLE(GP) which, consequently, will be employed in the following computations.

For small sample sizes as in the preceding example it is desirable to include further information in the statistical analysis. One possibility is to use Bayesian analysis as it is outlined in Section 17.6. Another one is to pool data over diﬀerent portfolios (as it was also done by Schnieper in the paper cited on page 415). Such a pooling was also done in the regional frequency analysis (cf. Section 14.4). Analyzing large Danish ﬁre claim data, McNeil6 justiﬁes the GP modeling for the upper tail of the claim size distribution and obtains an ML estimate γ = 0.497. 6 McNeil,

A.J. (1997). Estimating the tails of loss severity distributions using extreme value theory. ASTIN Bulletin 27, 117–137.

418

17. The Impact of Large Claims on Actuarial Decisions

Estimating the Net Premium for Extraordinarily High Priorities We regard a priority v > u as extraordinarily high when the number of observed excesses over v is very small (including the case that no claim size over v has been observed). This is the typical situation when v is the predetermined retentation level yet one wants to base the statistical inference on a larger number of claims. Within the parametric framework, the preceding parametric estimates γN (T ) and σN (T ) —obtained for the priority u—can still be employed to estimate the net premium for claim sizes over v > u. Recall from page 249 that the claim arrival times and claim sizes over v [v] ˜ Wγ,u,σ ˜ = λ(1 − Wγ,u,σ (v)). satisfy the conditions of a Poisson λ, process, where λ We obtain −1/γN (T ) ˜ N (T ) = N (T ) 1 + γN (T ) v − u λ T σN (T ) ˜ = E(N ). From (1.45), we found that as an estimator of λ [v] = Wγ,v,σ+γ(v−u) . Wγ,u,σ

Plugging in the estimators for γ and σ, one obtains by the mean m N (T ) = v +

σN (T ) + γN (T ) (v − u) 1 − γN (T )

an estimator of the mean claim size E(X). By combining these estimators, one ˜ N (T ) m obtains λ N (T ) as an estimator of the net premium E(SN ) = E(N )E(X) for the excesses of the claim sizes over v. Example 17.2.3. (Continuation of Example 17.2.1.) The estimated parameters of the GP distribution (based on the 17 claim sizes) for the retentation level of 50 millions are given in the following table. Table 17.3. Parametric estimation of the mean claim size (excesses) and the net premium (XL) in millions of NKr (and nonparametric estimate of net premium (XL)) for retentation level of 50 million. γ–Parameterization γ nonparametric MLE(GP)

µ

σ

–

–

–

0.254

50.0

19.06

Mean Claim Size

Net Premium (XL)

E(X)

E(SN ) 7.13

25.55

6.90

Notice that the estimate of the shape parameter γ is identical to that of the retentation level u = 22.

17.3. Segmentation According to the Probable Maximum Loss

419

Finally, we remark that there could be a positive trend in the frequency of large claims. Yet, such phenomena will be only dealt with in conjunction with partial duration ﬂood series (Section 14.2).

Combining the Nonparametric and Parametric Approach Nonparametric and parametric calculations can be combined to estimate the claim size df • over a ﬁxed priority u in a parametric manner, • below the priority in a nonparametric manner. Let Fn (x; ·) be the sample df based on the claim sizes xi . Let Wγ,˜µ,˜σ be the GP df ﬁtted to the upper tail of Fn (x; ·), cf. (2.35). Both dfs can be pieced together smoothly because Wγ,˜µ,˜σ (u) = Fn (x; u). The df Fn (x; x)I(x ≤ u) + Wγ,˜µ,˜σ (x)I(x > u) is such a nonparametric–parametric estimate of the claim size df. Such a procedure must also be used when the parametric hypothesis is valid only for a threshold larger than that predetermined by the XL treaty. Let us review the justiﬁcation for such an approach. We want to utilize a nontrivial model for the tail of the distribution, even in regions where possibly no data are available. A parametric modeling seems to be the only reasonable approach to that question. On the other hand, there is a greater bulk of data available in the center of the distribution so that a nonparametric estimate can have a higher accuracy than a parametric estimate if the parametric modeling is incorrect.

17.3

Segmentation According to the Probable Maximum Loss

In this section, we deal with the tariﬁcation of policies with respect to the probable maximum loss (PML)7 , especially in the property business with losses caused, e.g., by ﬁre, storm and earthquake. Besides a nonparametric estimation of the mean claim sizes in the diﬀerent PML groups we pursue a parametric approaches within GP models. 7 Gerathewohl,

K. (1976). R¨ uckversicherung: Grundlagen und Praxis. Verlag Versicherungswirtschaft.

420

17. The Impact of Large Claims on Actuarial Decisions

Mean Claim Sizes in Dependence on the Probable Maximum Loss It is evident that the loss potential is not homogeneous for all risks of a portfolio, but it depends on the underlying exposure of the individual risk of a policy. A particularly important ﬁgure is the PML of the individual risk that describes the maximum single claim size covered by the policy. This value is estimated by underwriting experts on the basis of additional information of the individual risk and can be thought of as the upper endpoint of the individual claim size distribution. Thus, besides a claim size variable X for single policies, there is a covariate Z, namely the PML. One is interested in the conditional expectation E(X|z) of X given Z = z, where z is the PML for a given policy. The aim is to estimate the conditional mean claim size E(X|z) as a function of the PML z (also see Section 6.6). It is apparent that the estimation of the conditional mean claim size is a regression problem. The next steps are to estimate the mean claim number and the mean total claim amount (net premium) in dependence on the PML. In practice, this is done for each sub–portfolio deﬁned by a PML group of risks within speciﬁed priorities. We introduce a greater variety of methods to estimate the mean claim size within a PML group. We are particularly interested in PMLs and claim sizes over a higher priority so that it is tempting to use also parametric approaches besides empirical ones.

Estimating the Mean Claim Size for a PML Group by Using Claim Degrees The ith PML group is determined by those risks with PMLs z between boundaries pi and pi+1 , where u = p0 < p1 < · · · < pm−1 < pm = ∞ is a predetermined partition. We write ni for the number of claims and xi,j for the claim sizes belonging to theith PML group. The PML pertaining to xi,j is denoted by zi,j . Note that n−1 i j≤ni xi,j is an estimate of the mean claim size within the ith PML group. In order to make the results in the diﬀerent PML groups comparable, we introduce • the claim degrees xi,j /zi,j , and • the empirical mean degrees di = n−1 i

j≤ni

xi,j /zi,j .

The mean claim size in the ith group can be estimated by mi = qi di where qi = (pi + pi+1 )/2 are the centers of the PML intervals. The advantage of using mean degrees di for estimating the mean claim sizes is that one may smooth the variation of these values by using, e.g., a polynomial least squares function.

17.3. Segmentation According to the Probable Maximum Loss

421

Example 17.3.1. (A Segmented Fire–Industrial Portfolio.) We deal with a middle–sized ﬁre–industrial portfolio segmented into 25 PML groups. It is indexed and coded. Each recorded claim size exceeds u = 100 thousand currency units. A ﬁrst impression of the data set (stored in im–pmlﬁ.dat) can be gained from Table 17.4. Table 17.4. PMLs and claim sizes in ﬁre–industrial portfolio in thousands. No. i From pi

To pi+1 PML zi,j

Claim Size xi,j

Claim Degree xi,j /zi,j

1

100

250

.

.

.

2

250

500

434

123

0.28341

2

250

500

324

254

0.78395

3

500

750

727

534

0.73427

·

·

·

·

·

·

25

150000

200000

183186

176

0.00096

25

150000

200000

169666

607

0.00358

25

150000

200000

165994

161

0.00097

The largest claim size of over 37 millions occurred in the 24th PML group. No claims are recorded in the ﬁrst PML group. An overview of the data is obtained by the scatterplot in Fig. 17.2. One recognizes that the recorded claim sizes in the highest PML group with PMLs between 150 and 200 millions are relatively small.

Claim Size

40000

0 0

Fig. 17.2. Scatterplot of claim sizes xj plotted against the PMLs zj . 100000

200000

PML

The special feature of the largest PML group may be caused by a systematic underwriting eﬀect of these large scaled risks, i.e., the insurance company takes some individual risk management measures in order to avoid heavy losses. Another aspect is that these large PML risks normally are composed of a number of diﬀerently located smaller risks—a greater industrial ﬁrm with diﬀerent locations and

422

17. The Impact of Large Claims on Actuarial Decisions

mean claim degree

buildings—which produce independently small losses and, therefore, a total loss is less probable. In Fig. 17.3, the mean claim degrees di are plotted against the group number i. A least squares line is added (the mean degrees of the second and third group are omitted from that analysis).

0.6

0.4 Fig. 17.3. Plotting the mean degrees di against the group number i including a least squares line (dotted).

0.2

10

20

PML group It is typical that the mean degrees di are decreasing in i. This is partially due to the fact that for larger PMLs there is a smaller threshold for the claim degrees (therefore, this evaluation of the mean degree is a length–biased estimation).

Up to now, it is not clariﬁed whether a plotting and smoothing should be done against the centers of the PML intervals instead of the group numbers. Using the smoothed mean degrees di from the least squares line, one obtains the estimate mi = qi di

(17.11)

of the mean claim size in the ith PML group.

Relative Frequencies of Segmented Portfolios and Estimating the Net Premium in PML Groups We introduce the relative claim frequencies fi = ni /ri where ni is again the number of claims and ri is the number of risks belonging to the ith PML group. Example 17.3.2. (Continuation of Example 17.3.1.) In Table 17.5, we list the number of risks ri and the claim numbers ni for each of the PML groups.

17.3. Segmentation According to the Probable Maximum Loss

423

Table 17.5. Number of risks ri and number of claims ni in ith PML group.

ri ni

Group Nr. i 2 3 4 5 6 7 8 9 10 11 12 13 2049 1658 1673 2297 1732 2536 1709 1186 1749 1669 1349 726 2 1 3 5 4 14 1 13 22 22 25 36

ri ni

14 719 36

15 254 24

16 194 22

17 123 9

18 76 13

19 61 19

20 34 8

21 36 11

22 24 5

23 26 7

24 15 5

25 28 9

We also plot the relative frequencies fi = ni /ri of claim numbers against the group number i and include a least squares line. The increase of the plot can also be explained as an eﬀect of a length–biased estimation.

rel. claim frequency

0.4

0.2

10

20

PML group Fig. 17.4. Plotting the relative frequencies fi = ni /ri of claim numbers against the group number i (including a least squares (dotted) line).

Letmi be as in (17.11) and fi the smoothed relative frequencies. Then, i xi,j one obtains by besides nj=1 mi fi ri an estimate of the net premium for the ith PML group. Subsequently, mi will be replaced by parametric estimates of the mean claim size. These estimates are either based on claim degrees or on the original claim sizes. The smoothing by least squares lines is done for the parameters of GP distributions.

424

17. The Impact of Large Claims on Actuarial Decisions

A Parametric Approach The mean claim size in the ith PML group can be estimated in a parametric manner. Specify a GP model for the claim degrees or the original claim sizes in the ith PML group and use the mean of the estimated GP distribution for estimating the mean claim degree or the mean claim size. For example, the claim degree in the ith group are between ui = u/pi+1 and 1 and, thus, a beta (GP2) modeling is possible (with unknown shape parameter αi ). Note that the mean of this beta df is (1 + ui |αi |/(1 + |αi |). Use, e.g., the Hill(GP2) estimator for evaluating αi .

A Parametric Nearest Neighbor Approach The disadvantage of the previous method is that, for some of the PML groups, the parametric estimation must be based on a very small number of claims. Recall that the mean claim size within a PML group is related to the conditional expectation E(X|z) of the claim size X conditioned on the PML Z = z. The estimation of the conditional expectation E(X|z) can also be based on the claim sizes yj , j = 1, . . . , k, pertaining to the k PMLs zj closest to z (for an introduction to the nearest neighbor method see Section 7.2). Then,

yj mk = k −1 j≤k

is an empirical estimate of the conditional mean claim size E(X|z). Likewise, the estimation can be carried out within a GP model. For that ˆk (z) of the shape and scale parameters purpose, compute estimates γˆk (z) and σ γ(z) and σ(z) based on the yj within a GP model and use the mean of the GP distribution Wγˆk (z),u,ˆσk (z) as an estimate of E(X|z). Example 17.3.3. (Continuation of Example 17.3.1.) For the given ﬁre–industrial claim sizes, the estimates γ ˆk (z) vary around the value 0.9 which corresponds to a Pareto modeling. In the further calculation, we take the constant estimate γ ˆk (z) = 0.88, cf. (17.13). The scale parameters σ(z) of the GP distribution W0.88,u,σ(z) are estimated by means of MLE’s for unknown scale parameters.

Motivated by Example 17.3.3, we use the simpliﬁed modeling of claim size distributions conditioned on Z = z by means of GP dfs Wγ0 ,u,σ(z) , where γ0 is a predetermined shape parameter which is independent of z. If σ ˆk (z) are estimates of σ(z) (ﬁrst, a smoothing may be carried out for the σ ˆk (z)), then the mean ˆk (qi )/(1 − γ0 ) m i,k = u + σ

(17.12)

of Wγ0 ,u,ˆσk (qi ) is an estimate of the mean claim size in the ith PML group.

17.3. Segmentation According to the Probable Maximum Loss

425

Example 17.3.4. (Continuation of Example 17.3.3.) Our computations only concern the 10th to 24th PML group (thus, we have PMLs from 5 to 150 millions). We tabulate the i,k in (17.11) and (17.12) of the mean claim sizes in the diﬀerent estimates mi and m groups for k = 30. The smoothing was carried out with least squares lines of degree 2. i,k in ith PML group. Table 17.6. Estimated mean claim sizes mi and m

mi m i,k

Group Nr. i 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 435 569 730 879 982 951 807 635 521 550 808 1380 2352 4747 10139 1367 1334 1292 1248 1208 1203 1254 1361 1524 1743 2017 2348 2734 3418 4526

Notice the remarkable diﬀerences in the total amounts of the estimates as well as the diﬀerent variations from group to group. Up to now we can not oﬀer a ﬁnal conclusion which of the estimation methods is preferable for the given PML data set.

Further modiﬁcations of the presented approaches are possible. For example, the smoothing of mean degrees, relative frequencies and GP parameters may be done by ﬁtting least squares lines to the log–values or the estimated GP distributions may be truncated at the upper boundary of the PML segment.

A Collective Viewpoint We clarify in which way we determined the mysterious shape parameter γ0 = 0.88 in Example 17.3.3. The collective claim size df for the portfolio (the unconditional claim size df) is Fγ,Z (x) =

Wγ,u,σ(z) (x) dFZ (z)

where FZ is the df of Z. For γ close to 1 and large x, the conditional of Wγ,u,σ(z) can be replaced by the Pareto df W1,1/γ,0,σ(z)/γ in the α–parameterization (cf. (6.38)). Therefore, (17.13) Fγ,Z (x) ≈ W1,1/γ,0,σ(z)/γ (x) dFZ (z) = W1,1/γ,0,σ0 (x) for larger x, where

σ0 =

γ σ(z)1/γ dFZ (z) /γ.

Thus, a Pareto modeling is adequate for the portfolio if this is justiﬁed in the segments. The value γ = 0.88 in Example 17.3.3 was estimated within this collective approach. The standard reference for collective risk theory is the book by B¨ uhlmann which was mentioned on page 5. Also see the aforementioned article by Kuon, Radtke and Reich.

426

17.4

17. The Impact of Large Claims on Actuarial Decisions

The Risk Process and the T –Year Initial Reserve

In Sections 17.1–17.3, the total claim amount SN was evaluated within a certain ﬁxed period. When the time t varies, we write N (t) and S(t) in place of N and SN , thereby obtaining the claim number and total claims processes. Next, we deal with the risk process, which is primarily based on the initial reserve, denoted by s, and the total claims process. The initial reserve is a variable of the system which can be chosen by the insurer. Ruin occurs when the risk process becomes negative. The primary aim in risk theory is the calculation of the ultimate ruin probability8 or an upper bound (Lundberg inequality) of that quantity (also see Section 17.5). Knowledge about the ruin probability within a ﬁnite time horizon is preferred by practitioners. For us the initial reserve is the central parameter that must be estimated by the actuary. We estimated that initial reserve s such that ruin within a time span of length T occurs with a probability of q × 100%.

Are Reserves for Single Portfolios of Practical Importance? To measure the performance of a single portfolio from an economic viewpoint, the insurer must take two aspects into account, namely • the proﬁtability, i.e., the expected proﬁt from running the portfolio over a certain period of time, and • a certain ﬂuctuation potential of a portfolio. The proﬁtability can be deduced from the estimated net premium and the related premium income. Yet, for an economic evaluation of a portfolio, it is also necessary to quantify the ﬂuctuations of the results of a portfolio over time. A commonly used approach is to consider the risk process and derive some initial reserve which is necessary to avoid a technical ruin in a ﬁxed ﬁnite time horizon with a certain probability. This reserve can be interpreted as the security capital the insurer needs to carry the collective risk of the portfolio. It is a kind of ﬂuctuation reserve which ensures that the company does not become ruined over time by possible deviations from the expected results of the portfolio. In this context, another important aspect is that risk processes allow comparison of diﬀerent portfolios not only by their proﬁtability, but also by the required initial reserves. 8 See,

elles.

e.g., Vylder, de F. (1997). Advanced Risk Theory. Editrans de l’Universit´e Brux-

17.4. The Risk Process and the T –Year Initial Reserve

427

For example, to compare a ﬁre portfolio, a portfolio consisting of natural perils (like earthquakes and storms) and some type of motor insurance portfolio, it is obviously necessary to deal with substantially diﬀerent reserves. By applying this approach to all business over all lines, the insurance company is able to conduct the technical solvency process. This also enables the supervisory authority to evaluate a solvency margin for the liabilities of the company.

Net and Total Premiums The net premium (at time t) is the expectation E(S(t)) of the total claim amount S(t). Assuming the independence of the claim size process X1 , X2 , X3 , . . . and the claim arrival process T1 , T2 , T3 , . . . , our basic condition in Section 17.1 is valid, namely the independence of the claim size process X1 , X2 , X3 , . . . and the claim numbers N (t). We also assume that the claim sizes Xi are identically distributed. Denote the mean claim size by E(X) again. Recall from (17.8) that the net premium can be written E(S(t)) = E(X)E(N (t)). If the claim number process N (t), t ≥ 0 is a homogeneous Poisson process with intensity λ, then E(S(t)) = E(X)λt. (17.14) If N (t), t ≥ 0 is a P´olya–Lundberg process, then a corresponding formula holds with λ replaced by ασ. Assuming that the total premium c(t)—the total amount to be paid by the policy holders to compensate the future losses—is a multiple of the net premium, one may write c(t) = (1 + ρ)E(S(t)), (17.15) where ρ is a constant called the safety loading.

The Risk Process We introduce the risk (surplus, reserve) process in the form U (t) = s + E(S(t)) + b(t) − S(t),

t ≥ 0,

where the single terms are • the initial insurer’s reserve s = U (0) ≥ 0 for a given portfolio; • the net premium E(S(t)) up to time t;

(17.16)

428

17. The Impact of Large Claims on Actuarial Decisions

• the safety function (mean surplus) b(t) at time t which is – the diﬀerence ρE(S(t)) between the total and net premiums (with ρ denoting the safety loading in (17.15)) – plus the interest income for the accumulated reserve – minus expenses, taxes and dividends etc., • the total claim amount S(t) = SN (t) = i≤N (t) Xi up to time t. The mean of the reserve variable U (t) is E(U (t)) = s + b(t),

(17.17)

and, therefore, b(t) is the surplus that can be added (in the mean) to the reserve. It is clear that the safety function b(t) must be nonnegative.

Special Safety Functions Insurance mathematics primarily concerns safety functions b(t) = c(t) − E(S(t)) which are the diﬀerences between the total premium and the net premium. If c(t) is given as in (17.15), then b(t) = ρE(X)E(N (t)) = ρE(X)λt for a homogeneous Poisson process with intensity λ. If ρ > 0, then the mean reserve is linearly increasing according to (17.17); on the other hand, the outstanding result of insurance mathematics is that ruin occurs with a positive probability (see the next Section 17.5). Accumulating reserves which are rapidly increasing is perhaps not a desirable goal. We also suggest to consider safety functions of the form b(t) = ρE(X)λtβ

(17.18)

for Poisson processes with intensity λ (and related functions for other claim number processes). Note that the safety exponent β = 1 is taken in the classical framework. If β ≤ 1/2, then ruin occurs with probability one, if the claim sizes satisfy the conditions of the law of the iterated logarithm. Example 17.4.1. (Continuation of Example 17.2.1.) We again consider the claim sizes over the retentation level of 22 million NKr. For the estimated parameters, several paths of the risk process—with initial reserve s = 250, safety exponent β = 0.3, 1 and safety loading ρ = 0.1—are generated and displayed in Fig. 17.5.

Let us summarize what has been achieved up to now:

17.4. The Risk Process and the T –Year Initial Reserve

429

Fig. 17.5. Paths of risk processes with β = 0.3 (left) and β = 1 (right).

• we estimated the unknown parameters γ, σ and λ, thereby getting an estimate of the mean claim size E(X) = u + σ/(1 + γ) and of the net premium λE(X), • we ﬁxed a safety function ρE(X)λtβ , where the choice of the safety coefﬁcients ρ and β is presumably dictated by the market and other external conditions. The knowledge of these constants enables us to simulate risk process paths. This also yields that any functional parameter of the risk process can be estimated, and the estimate can be computed by means of the simulation technique. This will be exempliﬁed in conjunction with the T –year initial reserve for a given q × 100% ruin probability.

Ruin Times and Ruin Probabilities within an Inﬁnite und Finite Time Horizon Ruin occurs at the time when the reserve variable U (t) becomes negative. Let τs be the ruin time (with the convention that τs = ∞ if no ruin occurs) of the risk process U (t), t ≥ 0, starting with an initial reserve s = U (0). The ruin time can be written τs = inf{t : U (t) < 0}. Consider the ruin time df Hs (x) = P {τs ≤ x} which can be a defected df, since non–ruin may occur with a positive probability. The ultimate ruin probability ψ(s) = P {τs < ∞}

(17.19)

as a function of the initial reserve s will be dealt with in Section 17.5. This is the quantity that is studied in ruin theory.

430

17. The Impact of Large Claims on Actuarial Decisions

Subsequently, we examine ruin within a certain ﬁnite time horizon T . The probability of ruin up to time T is ψT (s) = Hs (T ) = P {τs ≤ T }. We will calculate such ruin probabilities by simulations9 . Apparently, the ultimate ruin probability ψ(s) is the limit of ψT (s) as T goes to inﬁnity. One may also deal with early warning times τs,w = inf{t : U (t) < w},

(17.20)

where w > 0 is an early warning limit for the insurer. Because U (t) = s + E(S(t)) + b(t) − S(t) < w if, and only if, (s − w) + E(S(t)) + b(t) − S(t) < 0, we have τs,w = τ(s−w) , so that this case can be treated within the previous framework.

The T –Year Initial Reserve for a q × 100% Ruin Probability Choose the initial reserve s such that ruin occurs with a probability q within a time span of length T , where, e.g., q = 0.01 or q = 0.05 and T = 10 or T = 50 years. The value s(q, T ) is is called a T –year initial reserve10. Apparently, it depends on the underlying risk process of the speciﬁc portfolio. Note that s(q, T ) is a solution to the equation ψT (s) = Hs (T ) = q which can be written as (17.21) Hs−1 (q) = T. Thus, ﬁnd the initial reserve s such that the ruin time qf Hs−1 evaluated at q is equal to T . Check that s(q, T ) is a T –year threshold according to the q–quantile criterion (see page 251) for the process S(t) − (E(S(t)) + b(t)). A closely related concept would be the mean T –year initial reserve as the solution to Eτs = T, yet the mean seems to be inﬁnite even for ﬁnite ruin time rvs (for a safety exponent β ≤ 1/2).

The Initial Risk Contour Plot By employing the simulation technique, one can plot a sample qf as an estimate of the ruin time qf Hs−1 for several initial reserves s. This plot is the initial risk 9 Also see Vylder, de F. and Goovaerts, M.J. (1988). Recursive calculation of ﬁnite– time ruin probabilities. Insurance: Mathematics and Economics 7, 1–7. 10 Presented

at the 35th ASTIN meeting (Cologne, 1996) of the DAV.

17.4. The Risk Process and the T –Year Initial Reserve

431

contour plot. Notice that one gets a sample version of a contour plot of the function s(q, T ). Now, by employing an iteration procedure, one can calculate the desired estimate of the T –year initial reserve for a predetermined q×100% ruin probability. Knowledge about the accuracy of this procedure can be gained by constructing a parametric bootstrap conﬁdence interval, see Section 3.2. Example 17.4.2. (Continuation of Example 17.2.1.) We again consider the claim sizes over the retentation level of 22 million NKr. For the estimated parameters, we compute the initial reserve contour lines for s = 100, 200, 300. The risk process is taken for the safety exponent β = 1 and the safety loading ρ = 0.1.

40 s = 300 s = 200

20

s = 100 0.1

0.2

Fig. 17.6. Initial risk contour plot for the initial reserves s = 100, 200, 300 .

0.3

ruin probability

From the contour plot, one may deduce that, e.g., the 10–year initial reserve for the 5% ruin probability is about 250. The estimate obtained by an iteration procedure is sˆ(0.05, 10) = 225. We also compute an upper bootstrap conﬁdence bound. First, let us recollect the bootstrap procedure for this special application. The bootstrapping is based on the

Poisson λ, Gγ,µ,σ process as introduced on page 248, where λ = 1.7, γ = 0.254, µ = 0 and σ = 11.948. Moreover, the sampling time is T = 10. To obtain a bootstrap sample for the initial reserve, generate the claim number and claim sizes according to the speciﬁed Poisson process and estimate the parameters by means of the MLE(GP). Compute the initial reserve according to the estimated parameters and store this value in a ﬁle. Repeat this procedure according to the bootstrap sample size. We obtained the 80% and 90% upper bootstrap conﬁdence bounds 334 and 508. These larger bounds are not surprising in view of the small sample size of 17 claims (in the mean).

It is apparent that such contour lines can be utilized to simulate a T –year initial reserve. This can be done by using a StatPascal program11. 11 Supplementary

details can be found in Reiss, R.–D., Radtke, M. and Thomas, M.

432

17.5

17. The Impact of Large Claims on Actuarial Decisions

Elements of Ruin Theory

Assume that the claim number process is a homogeneous Poisson process with intensity λ > 0. Assume that the total premium is c(t) = (1 + ρ)E(X)λt, where ρ>0

(17.22)

is the safety loading (see (17.15)). We deal with risk processes U (t) = s + (1 + ρ)E(X)λt − S(t). Denote the ultimate ruin probability by ψ(s) again, given an initial reserve s. We refer to the review article by Embrechts and Kl¨ uppelberg12 and to [11] for a detailed account of extremal ruin theory.

Exact Evaluation of Ruin Probabilities Let F denote ∞the claim size df again. Because 0 < E(X) < ∞, we know from (2.22) that 0 (1 − F (y)) dy = E(X), and, hence, h(y) = (1 − F (y))/E(X), y ≥ 0, is a density of a df, say H. Because ∞ 1 (1 − F (y)) dy 1 − H(x) = EX x we see that the survivor function of H can be expressed by tail probabilities (cf. (2.24)). Under the present conditions, one obtains 1 − ψ(s) = p

∞

(1 − p)k H k∗ (s),

s≥0

(17.23)

k=0

for the probability of non–ruin13 where p = ρ/(1 + ρ). Therefore, one must compute a compound geometric df (cf. (17.6)) in order to evaluate ruin probabilities. (1997). The T –year initial reserve. Technical Report, Center for Stochastic Processes, Chapel Hill. 12 Embrechts, P. and Kl¨ uppelberg, C. (1993). Some aspects of insurance mathematics. Theory Probab. Appl. 38, 262–295. 13 See,

e.g., Hipp, C. and Michel, R. (1990). Risikotheorie: Stochastische Modelle und Statistische Methoden. Verlag Versicherungswirtschaft, Karlsruhe.

17.5. Elements of Ruin Theory

433

Alternatively, the ruin probability function may be written in terms of the survivor functions of H k∗ . We have ∞

(1 − p)k (1 − H k∗ (s)), s ≥ 0. (17.24) ψ(s) = p k=1

Deduce that ψ(s) tends to zero as s → ∞. We compute the auxiliary df H for two special cases. In addition, an explicit representation of the ruin probability function ψ can be given for exponential claim sizes (Erlang model). • (Exponential Claim Sizes.) Assume that the claim sizes are exponentially distributed. More precisely, let F (x) = 1 − e−x/σ , x ≥ 0. Hence, EX = σ. Then, H(x) = F (x). From (17.7) and (17.23), one obtains ρs 1 exp − , s ≥ 0. (17.25) ψ(s) = 1+ρ (1 + ρ)E(X) Thus, the ruin probabilities decrease with an exponential rate to zero as the initial capital s goes to inﬁnity. • (Pareto Claim Sizes.) If X is a Pareto random variable with df W1,α,µ,σ with lower endpoint µ + σ > 0 and α > 1, then E(X) = µ + σα/(α − 1) and x − µ −(α−1) σ (17.26) 1 − H(x) = E(X)(α − 1) σ for x ≥ µ + σ.

Lower Bounds of Ruin Probabilities A simple lower bound of ψ(s) can be easily deduced from (17.24). Because H k∗ ≤ H(s), one gets ψ(s) ≥ (1 − H(s))/(1 + ρ). (17.27) • (Exponential Claim Sizes.) Again, let F (x) = 1 − e−x/σ , x ≥ 0. We have ψ(s) ≥ exp(−E(X)/s)/(1 + ρ). We see that the simple lower bound is close to the exact one in (17.25). • (Pareto Claim Sizes.) From (17.26), we obtain the lower bound s − µ −(α−1) σ ψ(s) ≥ E(X)(α − 1)(1 + ρ) σ

(17.28)

for s ≥ µ + σ. Thus, in contrast to the preceding examples, one gets an arithmetic rate of the lower bound as s → ∞. We refer to the aforementioned book by Hipp and Michel for more reﬁned lower bounds.

434

17. The Impact of Large Claims on Actuarial Decisions

Upper Bounds: The Lundberg Inequality An upper bound for the ultimate ruin probability is provided by the Lundberg inequality. Assume that R > 0 satisﬁes the equation ∞ eRy (1 − F (y)) dy = (1 + ρ)E(X). (17.29) 0

Such a constant R is called an adjustment coeﬃcient. Then, the inequality ψ(s) ≤ exp(−Rs),

s ≥ 0,

(17.30)

holds. • (Exponential Claim Sizes With Mean µ > 0.) We have R=

ρ (1 + ρ)E(X)

(17.31)

and, hence, the upper bound exceeds the exact value in (17.25) by a factor 1 + ρ. • (Pareto Claim Sizes.) For Pareto claim size dfs the Lundberg inequality is not satisﬁed according to (17.28). Notice that the left–hand side of (17.29) is equal to inﬁnity.

Ruin Probabilities in the Pareto Case Revisited Direct calculations lead to an upper bound of the ultimate ruin probability ψ(s) for Pareto claim size dfs W1,α,µ,σ with α > 1. We have14 ψ(s) ≈

s −(α−1) σ , E(X)(α − 1)ρ σ

s → ∞.

(17.32)

We see that the lower bound in (17.28) is exact, except of a factor (ρ + 1)/ρ.

17.6

Credibility (Bayesian) Estimation of the Net Premium

As in Section 17.1 we deal with an excess–of–loss (XL) reinsurance treaty. The primary aim is to estimate the net premium which is the expectation of the total 14 Bahr von, B. (1975). Asymptotic ruin probabilities when exponential moments do not exist. Scand. Actuarial J., 6–10. In greater generality dealt with in Embrechts, P. and Veraverbeke, N. (1982). Estimates for the probability of ruin with special emphasis on the probability of large claims. Insurance: Mathematics and Economics 1, 55–72.

17.6. Credibility (Bayesian) Estimation of the Net Premium claim amount SN =

435

(Xi − u)

i≤N

for the next period, where N is the random number of claims occurring in the period, and the Xi are the random claim exceedances over the priority u. Throughout, we assume that the exceedance times and the exceedances can be jointly modeled by a Poisson(λ, F ) process. Thus, the exceedance times are described by a homogeneous Poisson process with intensity λ > 0, and the exceedances have the common df F . The net premium is E(SN ) = λ(mF − u)

(17.33)

with mF denoting the mean of F . The estimate of the net premium is based on the exceedance times and exceedances of the past T years. In contrast to Section 17.1, we merely deal with the estimation of the net premium within certain Poisson– Pareto models. Our attention is focused on the Bayes estimation—that is, the exact credibility estimation—of the net premium. A justiﬁcation for a restriction to the exact credibility estimation was formulated by S.A. Klugman [35], page 64: “Most of the diﬃculties ... are due to actuaries having spent the past half–century seeking linear solutions to the estimation problems. At a time when the cost of computation was high this was a valuable endeavor. The logical solution is to drop the linear approximation and seek the true Bayesian solution to the problem. It will have the smallest mse and provides a variety of other beneﬁcial properties”. Recall that the mean of a Pareto distribution is equal to inﬁnity if the shape parameter α is smaller or equal to 1, cf. (1.44). This yields that the support of a prior distribution must be restricted to parameters α > 1, when the Bayes estimation of the mean is dealt with. This is the reason that we introduce truncated gamma distributions in the subsequent lines.

Truncated Gamma Distributions A gamma distribution, truncated left of q ≥ 0, with shape and reciprocal scale parameters s > 0 and d > 0, cf. (3.42), serves as a prior. The pertaining df and density are denoted by Hs,d,q and hs,d,q . One gets gamma distributions if q = 0. The gamma density hs,d,q , truncated left of q ≥ 0, is given by

α > q. (17.34) hs,d,q (α) = hs,d (α)/ 1 − Hs,d (q) , It turns out that truncated gamma densities are conjugate priors for our models. That is, the posterior densities are of the same type. Straightforward calculations yield that such a truncated gamma distribution has the mean

Ms,d,q = s(1 − Hs+1,d (q)) d(1 − Hs,d (q)) (17.35)

436

17. The Impact of Large Claims on Actuarial Decisions

and the variance s (s + 1)(1 − Hs+2,d (q))(1 − Hs,d (q)) − s(1 − Hs+1,d (q))2 . Vs,d,q = d2 (1 − Hs,d (q))2

(17.36)

These formulas are useful • to specify a gamma prior with predetermined moments, • to compute the numerical value of a Bayes estimate.

Estimation of the Net Premium for Poisson Processes with Pareto GP1(u, µ = 0) Marks For the modeling of exceedances over the priority u we use dfs within the restricted Pareto GP1(u, µ = 0) model which are given by W1,α,0,u (y) = 1 − (y/u)−α ,

y ≥ u,

(17.37)

where α > 0. These dfs are used for the modeling of exceedances over a priority u. The pertaining excesses have the mean u/(α − 1) and, therefore, the net premium (cf. (17.33)) is given by m(λ, α) =

λu , α−1

α > 1.

(17.38)

This functional can be written in a product form as given in (9.16). We further apply the concept as developed in Section 9.3. The prior is p(λ, α) = hr,c (λ)hs,d,q (α) with q > 1. The posterior with respect to the parameter α is p2 (α|y) = hs ,d ,q (α) with s and d as in (5.6). One obtains the Bayes estimate m({t i , yi }) = λ∗k m∗k,q (y) of the net premium m(λ, α) with λ∗k as in (3.53) and ∞ u ∗ hs ,d ,q (α) dα. mk,q (y) = α − 1 q

(17.39)

(17.40)

The integral must be numerically evaluated. Notice that m∗k,q (y) is a Bayes estimate of the mean of excesses over u.

Estimation of the Net Premium for Poisson Processes with Pareto GP1(u) Marks In contrast to the preceding lines, we assume that the exceedances over the priority u are distributed according to a Pareto df y − u −α , y ≥ u, (17.41) Fα,η (y) = 1 − 1 + ηu

17.6. Credibility (Bayesian) Estimation of the Net Premium

437

where α, η > 0, cf. (5.9). Thus, we deal with the full Pareto model in the (α, η)– parameterization. One obtains the restricted GP1(u, µ = 0) model if η = 1. The excesses have the mean uη/(α − 1) and, therefore, the net premium is given by λuη , α > 1. (17.42) m(λ, α, η) = α−1 The prior is p(λ, α, η) = hr,c (λ)hs,d,q (α)f (η) with q > 1, and f is another probability density on the positive half–line. The posterior with respect to the parameter vector (α, η) is p2 (α, η|y) = hs ,d (η),q (α)f˜(η) with s , d (η) and f˜(η) as in (5.13) and (5.14). One obtains the Bayes estimate m({t i , yi }) = λ∗k m∗∗ k,q (y) of the net premium m(λ, α, η) with λ∗k as in (3.53) and ∞ ∞ u hs ,d (η),q (α) dα f˜(η) dη. (y) = η m∗∗ k,q α−1 0 q

(17.43)

(17.44)

Estimation of Parameters We also shortly note the estimates of the parameters α and η if a prior hs,d,q is taken for α. • The restricted Pareto model GP1(u, µ = 0): from (17.35) deduce that the Bayes estimate of α > q ≥ 0 is α∗k,q (y) = α∗k (y)

1 − Hs +1,d (q) , 1 − Hs ,d (q)

(17.45)

where α∗k (y) is the Bayes estimate in the case of the gamma prior (with q = 0; see (5.7)). Notice that α∗k,0 (y) = α∗k (y). • The full Pareto model GP1∗ (u): extending the formulas in (5.15) and (5.16), one gets s (1 − Hs +1,d (η) (q)) ˜ ∗ f (η) dη, q ≥ 0, (17.46) αk,q (y) = d (η) (1 − Hs ,d (η) (q)) ∗ and, independently of q, ηk,q (y) = ηk∗ (y) as Bayes estimates of α > q ≥ 0 and η > 0.

Part VI

Topics in Material and Life Sciences

Chapter 18

Material Sciences In Section 18.1 the blocks method (in other words, annual maxima or Gumbel method) is applied to corrosion engineering. We are particularly interested in the service life of items exposed to corrosion. Our primary sources are the book by Kowaka et al., [37] and a review article by T. Shibata1 . Section 18.2 concerns a stereological problem in conjunction with extreme value analysis. We are interested in extremes of 3–dimensional quantities of which we merely observe a 2-dimensional image.

18.1

Extremal Corrosion Engineering

In corrosion analysis the role of time periods is played by several units such as steel tanks. One can also deal with a single area which is divided into T subareas of the same size. This corresponds to dividing a given period into T blocks. For each of the units or subareas, which are exposed to corrosion, we observe the maximum pit depth (or, e.g., a measurement concerning stress corrosion cracking), and thus get a data set y1 , . . . , yT of maxima. In the statistical modeling we get random variables Y1 , . . . , YT which are distributed according to a Gumbel df G0,µ,σ or, in general, according to an extreme value df Gγ,µ,σ . The uniﬁed extreme value model was introduced by Laycock et al.2 in the ﬁeld of corrosion analysis. Assume that there are T units or an area of size T exposed to corrosion. Our ﬁnal goal is to determine the T –unit service life which is the period of x(T, l) years such that the T –unit depth u(T ) for x(T, l) years is equal to an allowable margin of thinning l. 1 Shibata, T. Application of extreme value statistics to corrosion. In [15], Vol. II, 327– 336. 2 Laycock,

P.J., Cottis, R.A. and Scarf, P.A. (1990). Extrapolation of extreme pit depths in space and time. J. Electrochem. Soc. 137, 64–69.

442

18. Material Sciences

Recall from page 6 that the T –unit pit depth u(T ) for a given time period of length x is the level once exceeded on the average.

Estimation of a T –Unit Depth Let Yi be the maximum pit depth of the ith unit within the given period of x years. The T –unit depth u(T ) is the solution to the equation

I(Yi ≥ u) = 1 E i≤T

which are the quantiles u(T ) = G−1 0,µ,σ (1 − 1/T ) or u(T ) = G−1 γ,µ,σ (1 − 1/T ) corresponding to (1.13). It is evident that the T –unit depth also depends on the service time x. Occasionally, we also write u(T, x) in place of u(T ). Necessarily, u(T, x) is an increasing function in x. The value u(T ) is evaluated by estimating the parameters µ, σ or γ, µ and σ as it is done in Chapter 4 within the Gumbel EV0 model or the full extreme value model EV. Example 18.1.1. (Maximum Pit Depths of Steel Tanks.) The maximum pit depths (in mm) of steel tanks exposed to cyclic dry/wet (by sea water) conditions are measured after 4 years of service (stored in gu–pit04.dat). This data set is taken from Kowaka et al., [37], Table 18.13 . These authors estimate a Gumbel distribution with location and scale parameters µ = 1.03 and σ = 0.37 by visual inspection of a Gumbel probability paper. The 100–unit depth u(100) is estimated as 2.76mm. Table 18.1. Maximum pit depth measured in mm after 4 years of service.

3 With

0.3

0.7

0.8

0.9

1.1

1.2

1.3

1.4

1.5

1.6

0.7

0.7

0.8

1.0

1.1

1.2

1.3

1.4

1.6

2.0

0.7

0.8

0.9

1.0

1.1

1.2

1.3

1.4

1.6

2.1

0.7

0.8

0.9

1.0

1.1

1.2

1.3

1.4

1.6

2.3

0.7

0.8

0.9

1.0

1.1

1.3

1.4

1.5

1.6

2.5

reference given to Tsuge, H. (1983). Archive of 51st Corrosion Symposium, JSCE, page 16.

18.1. Extremal Corrosion Engineering

443

This result is conﬁrmed by the MLE(EV0). One gets a Gumbel distribution with location and scale parameters µ = 1.00 and σ = 0.36. The adequacy is also conﬁrmed by the MLE(EV) and other diagnostic tools. The estimate for the 100–unit depth u(100) is 2.65mm.

Varying the Service Time Subsequently, we compute the T –unit depths for diﬀerent years of service. We write u(T, x) in place of u(T ) to emphasize the dependence of the T –unit depth from the service time x. In addition to the data analyzed in Example 18.1.1 for a service time of x = 4 years, we also deal with data for service times x = 6, 12. Example 18.1.2. (Continuation of Example 18.1.1 About Maximum Pit Depths of Steel Tanks.) We also analyze a sample of 32 maximum pit depths after a service time of 6 years (stored in gu–pit06.dat) and a sample of 30 maximum pit depths after a service time of 12 years (stored in gu–pit12.dat). These data sets are also taken from Kowaka et al. [37]. We compare the estimates obtained by the MLE(EV0) with those in [37]. In the subsequent table we compare the estimated Gumbel parameters µ, σ and the pertaining 100–unit depths u(100) in [37] with the values obtained by the MLE(EV0). The corresponding parameters of the MLE(EV) are added. Recall that Gumbel distributions possess the shape parameter γ = 0. Table 18.2. Estimated EV parameters and 100–unit pit depths. Estimated EV0/EV parameters and 100–unit depths Kowaka et al.

MLE(EV0)

MLE(EV)

x

4

6

12

4

6

12

4

6

12

γ(x)

0

0

0

0

0

0

−0.07

−0.07

0.38

µ(x)

1.03

1.16

1.43

1.00

1.17

1.58

1.01

1.19

1.40

σ(x)

0.37

0.49

1.23

0.36

0.41

0.94

0.36

0.42

0.79

u(100, x)

2.76

3.4

7.1

2.65

3.1

6.0

2.43

2.82

11.2

One recognizes a greater diﬀerence of the estimated parameters in the Gumbel model for the service time of 12 years. Within the EV–model one gets a shape parameter γ = 0.38, which indicates a heavier upper tail of the distribution. Thus, the shape parameter γ signiﬁcantly deviates from γ = 0 which is the shape parameter for Gumbel distributions. Whereas the Gumbel distribution—with the larger scale parameter σ = 1.23 of

444

18. Material Sciences

Kowaka et al.—catches the heavier upper tail it does not ﬁt to the lower data. Thus, these authors locally ﬁtted a Gumbel distribution to the upper extremes of the maxima y1 , . . . , y T .

The Service Life Criterion Based on diﬀerent T –unit depths u(T, xk ) we select the service life x(T, l) which is the number of years x such that the T –unit depth u(T, x) is equal to an allowable margin of thinning l. Thus, given T units exposed to corrosion there is one maximum pit depths which will exceed the depth of the amount l within x(T, l) years on the average. Example 18.1.3. (Continuation of the Preceding Examples.) The margin of thinning is taken equal to l = 5mm in the preceding example. By ﬁtting a linear and a quadratic regression line to the 100–unit depths u(100, x) based on the MLE(EV) estimates for the three diﬀerent years x = 4, 6, 12, one obtains estimates of x ˆ(100, 5) = 6.9 and x ˆ(100, 5) = 8.5 years for the service life compared to x ˆ(100, 5) = 8.2 years which was estimated by Kawata et al.

100-unit dept

10

Fig. 18.1. 100–unit depths plotted against years, ﬁtted linear (dashed) and quadratic (solid) least squares lines, constant (dotted) line with value equal to the margin of thinning l = 5mm.

5

0.0 4

5

6

7

8 year

9

10

11

12

We merely dealt with the blocks method, yet one could also apply the peaks– over–threshold (pot) method. Then, one should take care of a possible clustering of larger pit depths. This question is discussed by Scarf and Laycock4. A global modeling of pit depth by means of log–normal distributions may be found in a paper by Komukai and Kasahara5. 4 Scarf,

P.A. and Laycock, P.J. (1994). Applications of extreme value theory in corrosion engineering. In: [15], Vol. II, 313–320. 5 Komukai,

S. and Kasahara, K. (1994). On the requirements for a reasonable extreme value prediction of maximum pits on hot–water–supply copper tubing. In: [15], Vol. II, 321–326.

18.2 Stereology of Extremes

18.2

445

Stereology of Extremes co–authored by E. Kaufmann6

This section is devoted to the well–known Wicksell7 “corpuscle problem” which concerns the size and number of inclusions in a given material (such as particles of oxides in a piece of steel). If we assume that the particles are spheres, then the size is determined by the radius R which is regarded as a random variable. Besides the df F of R one is interested in the number of particles. Information about the spheres can be gained by those which become visible on the surface area. On a plane surface one observes circles which are determined by the radius S with a df which is denoted by W (F ). This df is addressed as the Wicksell transformation of F . Drawing conclusions about the initial 3–dimensional objects from the observable 2–dimensional ones is a genuine problem in stereology. Our attention will be focused on the modeling of the upper tails of F and W (F ).

The Wicksell Transformation At the beginning we compute the Wicksel transformation W (F ) as a conditional df of the radius variable S and provide diﬀerent representations. A sphere in the Euclidean space is determined by the coordinates x, y, z of the center and the radius r. We assume that 0 ≤ z ≤ T . The sphere intersects the x, y–plane if r > z. In that case one observes a circle in the x, y–plane with radius √ s = r2 − z 2 .

s r

(x,y,0)

(x,y,z)

Fig. 18.2. Computation of circle radius s.

Within the stochastical formulation we assume that the random radius R > 0 and the random coordinate Z are √ independent, R has the df F , and Z is uniformly distributed on [0, T ]. Thus, S = R2 − Z 2 is the random radius of the circle in the x, y–plane under the condition that S 2 = R2 − Z 2 > 0; that is, there is an intersection with the x, y–plane. 6 University 7 Wicksell,

of Siegen.

S.D. (1925). The corpuscle problem I. Biometrika 17, 84–99, and Wicksell, S.D. (1926). The corpuscle problem II. Biometrika 18, 152–172.

446

18. Material Sciences

We compute the survivor probability P {S > s} for s > 0 and the conditional survivor function WT (F )(s) = P (S > s|S > 0). Applying results for conditional distributions, namely (8.4) and (8.13), one gets P {S > s}

' P R > s2 + z 2 dL(Z)(z)

1 T ' 2 F s + z 2 dz, T 0

= =

where F is again the survivor function of F . Therefore, T WT (F )(s) = If

∞ 0

0

√ F s2 + z 2 dz . T (z) dz F 0

(18.1)

F (z) dz < ∞, then the “tail probability” formula (2.24) yields WT (F )(s)

→T →∞ =:

∞ √

F s2 + z 2 dz 0 ∞ z dF (z) 0 H(s) = W (F )(s), H(0)

(18.2)

where the df W (F ) is the Wicksell transformation of F .

Alternative Representations of the Wicksell Transformation We add alternative representations of the numerator H(s). Applying the substitution rule and, in a second step, writing F (z) as an integral with respect to F and interchanging the order of integration one gets ∞ 2

−1/2 (18.3) H(s) = z − s2 zF (z) dz s ∞' r2 − s2 dF (r). (18.4) = s

With the help of (18.4) verify that H(s) = h(s) = s

∞

∞ s

h(z) dz with

−1/2 2 r − s2 dF (r).

(18.5)

s

Hence, h is a density pertaining to H. This also yields that w(F ) := h/H(0) is a density of the Wicksell transformation W (F ).

18.2 Stereology of Extremes

447

Poisson Process Representations In the preceding lines we merely considered the radii of the spheres and circles. Next, we include the centers and the number of occurances. These quantities are jointly described by a marked Poisson process. Thus, our 2–step approach resembles that employed for exceedances, where we ﬁrst introduced the exceedance df and, later on, the Poisson process of exceedances. The centers of the spheres are regarded as points of a homogeneous Poisson process with intensity c > 0. This is a Poisson process with intensity measure cλ3 (see the end of Section 9.5), where λ3 denotes the 3–dimensional Lebesgue measure. Secondly, let F be the df of the sphere radii which are regarded as marks. Then, a joint statistical model for the inclusions—for centers as well as radii—is given by a Poisson(cλ3 , F ) process with unknown intensity c and unknown df F . The intersections with the x, y–plane, that is, the centers and radii of the circles, constitute a marked homogeneous Poisson(2cH(0)λ2, W (F )) process, where W (F ) is the Wicksell transformation of F and H(0) is the constant in (18.2). The new marked Poisson process is derived from the initial one by • a truncation procedure, because only spheres contribute to the new process that intersect the plane, • a transformation, due to the fact that circle coordinates instead of the original sphere coordinates are observed. In practice, the surface area is a subset A in the x, y–plane with ﬁnite measure λ2 (A) < ∞. In addition, to analyze the size distribution of the circles, respectively, of the spheres, one merely has to consider the marginal Poisson process of circle radii. Under the postulated homogeneity, the circle centers provide no information about the radius df. The intensity measure ν of the marginal Poisson process pertaining to the circle radii is given by the mean value representation ν(s, ∞) = =

2cλ2 (A)H(0)W (F )(s) ∞ ' F ( s2 + z 2 ) dz, 2cλ2 (A)

(18.6)

0

where the latter equation follows from (18.2). Hence, the circle radii may be treated as a random number N of independent and identically distributed random variables S1 , S2 , . . . with common df W (F ), where N is a Poisson random variable with parameter 2cλ2 (A)H(0) which is independent of the Si .

The Art of Stereological Extreme Value Analysis In the sequel, we study the relationship between the tails of radius distributions of spheres and circles. The modeling of the upper tail of the observable circle radii

448

18. Material Sciences

by means of GP dfs can regarded as business as usual. Our primary aim is to ﬁnd a theoretical justiﬁcation for a GP modeling for the sphere radii. This will be done by comparing • max/pot–domains of attractions, • the validity of certain von Mises conditions. In addition, a counterexample shows that a GP upper tail for the circle radii does not necessarily justify such a modeling for the sphere radii.

Max–Domains of Attraction We impose conditions on F which imply that the Wicksell transformation W (F ) belongs to the max–domain of attraction of an EV df G; in short W (F ) ∈ D(G). First we provide some details and a proof in the special case of Fr´echet dfs G1,α . Assume that F ∈ D(G1,α ). From Section 1.3 we know that this condition holds if, and only if, the survivor function F of the sphere radius has a regularly varying tail with index −α < 0; that is, for each t > 0 we have F (st)/F (s) → t−α as s → ∞. By substitution and employing the letter property, one gets

∞

' F ( s2 + z 2 ) dz

0

' F (s 1 + y 2 ) dy 0 ∞ (1 + y 2 )−α/2 dy ∼ sF (s) ∞

= s

0

as s → ∞, if α > 1 (otherwise, the latter integral is inﬁnite). Combining this with (18.2) one gets that W (F ) is a regularly varying function with index 1 − α. Hence, W (F ) ∈ D(G1,α−1 ), if α > 1. Such questions were treated in the article by Dress and Reiss, cited on page 33, in greater generality, with the preceding result as a special case. We have W (F ) ∈ D(Gi,β(α) ), if F ∈ D(Gi,α ), for i = 1, 2, with the shape parameters β(α) given by ⎧ ⎪ ⎪ α−1 ⎪ ⎨ β(α) =

⎪ ⎪ ⎪ ⎩ α − 1/2

i = 1, α > 1, (18.7)

if i = 2, α < 0.

In the Gumbel case we have W (F ) ∈ D(G0 ), if F ∈ D(G0 ). It is remarkable that we do not get any result for W (F ) with −1/2 ≤ β(α) < 0.

18.2 Stereology of Extremes

449

Von Mises Conditions If the df F has a density f which is positive in a left neighborhood of ω(F ), then the following von Mises conditions are suﬃcient for F to belong to the domain of attraction of an EV df Gi,α . We assume that M (0) :

ω(F )

(1 − F (u)) du < ∞ for some t < ω(F ), ω(F ) (1 − F (u)) du/(1 − F (t))2 = 1; lim f (t) t

t↑ω(F )

M (1, α) : ω(F ) = ∞,

M (2, α) : ω(F ) < ∞,

t

lim tf (t)/(1 − F (t)) = α;

t↑∞

lim ((ω(F ) − t)f (t)/(1 − F (t)) = −α.

t↑ω(F )

We also write M (0, α) instead of M (0). For a diﬀerent von Mises condition, which involves the 1st derivative of the density f , we refer to (2.32). If F satisﬁes condition M (i, α), then F ∈ D(Gi,α ). The preceding conditions also entail the convergence in terms of the variational and Hellinger distances, see [42]. Under the restrictions on α given in (18.7), it was proved by Drees and Reiss that W (F ) fulﬁlls M (i, β(α)), if F fulﬁlls M (i, α). Most important, from our viewpoint, is the following converse result: if β(α) < −1/2 or β(α) > 0 and W (F ) fulﬁlls M (i, β(α)), then F is in the domain of attraction of Gi,α . Therefore, if we come to the conclusion that the statistical modeling of circle radii by means of a GP df with the shape parameter β(α) < −1/2 or β(α) > 0 is appropriate, then we may assume that the upper tail of F is of GP type with shape parameter α. The preceding results were extended to ellipsoidal particles by Hlubinka8 , where the particles (except the positions) are determined by a bivariate random vector.

A Counterexample We focus our attention on the case i = 2 and β(α) = −1/2. We provide an example of a Wicksell transformation W (F ), where W (F ) fulﬁlls the von Mises condition M (2, −1/2), yet F is not in the max–domain of attraction of an EV df. More precisely, we show that W (F ) satisﬁes a Weiss condition (belongs to a δ-neighborhood of a GP df), yet F is a df with the total mass concentrated in a single point (and, therefore, does not belong to the domain of attraction of an EV 8 Hlubinka,

5–24.

D. (2003). Stereology of extremes; shape factor of spheroids. Extremes 6,

450

18. Material Sciences

df). Therefore, it is not self–evident to employ a GP modeling for the upper tail of F , if such a modeling is accepted for W (F ). If the size of the inclusions is ﬁx, say s0 > 0, then one can deduce the density of the Wicksell transformation W (F ) from (18.5). Denote again by w(F ) the density of W (F ). We have w(F )(s)

= =

s ' s0 s20 − s2 2 w2,−1/2,µ,σ (s) 1 + O W 2,−1/2,µ,σ (s) h(s) H(0)

=

(18.8)

for 0 < s < s0 , where µ = s0 and σ = s0 /2.

Wicksell Transformation and Exceedance Dfs There is a nice relationship W (F )[u] = W (F [u] )[u]

(18.9)

between exceedance dfs of F and the pertaining Wicksell transformations W (F ), due to Anderson and Coles9 . The proof is straightforward; we have W (F )[u] (s)

H(s) H(u) ∞√ r2 − s2 dF (r) = 1 − s∞ √ r2 − u2 dF (r) u ∞√ r2 − s2 dF [u] (r) = 1 − s∞ √ r2 − u2 dF [u] (r) u

= 1−

= W (F [u] )[u] (s),

s ≥ u.

This result was applied by Anderson and Coles to estimate the upper tail of the initial df F based on exceedances of circle radii (see below).

Statistical Inference In the article by Drees and Reiss, the estimation of the initial df F was treated in several steps. Based on the exceedances of circle radii over some threshold, a GP density with shape parameter βˆ is ﬁtted to the upper tail of the circle radius density w(F ). This tail estimator is combined with a nonparametric estimator of the central part of w(F ) by the piecing together method. In a second step, an estimate fˆ of the sphere radius density f is computed by applying a smoothed 9 Anderson,

C.W. and Coles, S.G. (2002). The largest inclusions in a piece of steel. Extremes 5, 237–252.

18.2 Stereology of Extremes

451

expectation maximization (EMS) algorithm. Notice that the EMS algorithm is one of the common methods within the framework of ill–posed inverse problems such as the Wicksell corpuscle problem. Finally, the upper tail of the estimated density fˆ is replaced by a GP density with shape parameter α ˆ as established in (18.7). Likewise, one could generally investigate extremes in inverse problems. An alternative estimation procedure is employed by Anderson and Coles. Again one assumes that a GP modeling for the upper tail of F is valid. In the subsequent lines, we make use of the γ–parametrization of GP dfs because then the left endpoint of the support is just the location parameter. Replacing F [u] by a GP df Wγ,u,σ on the right–hand side of (18.9) one gets the truncated Wicksell transformation W (Wγ,u,σ )[u] . Notice that this df is the exceedance df for the pertaining circle radii above the threshold u. Moreover, this df has the density ∞ s s (r2 − s2 )−1/2 dWγ,u,σ (r) [u] , s ≥ u. w(Wγ,u,σ ) (s) = ∞ √ r2 − u2 dWγ,u,σ (r) u Now estimate the parameters γ and σ by applying the ML method to the circle radii exceedances.

Additional Literature on Maximum Inclusion Sizes Applied work about the “maximum size of inclusions” started with articles by Murakami and Usuki10 and Murakami et al.11 . In that context, we also refer to a series of articles by Shi, Atkinson, Sellars and Anderson; see, e.g., the article by J.R. Yates et al.12 and the references therein. Further results about stereological extremes may be found in articles by Takahashi and Sibuya13 . Notable is also a recent, theoretically oriented review about stereological particle analysis by K¨otzer14 which includes a longer list of references to the stereological literature. 10 Murakami, Y. and Usuki, H. (1989). Quantitative evaluation of eﬀects of non–metallic inclusions on fatigue strength of high strength steel II: fatigue limit evaluation based on statistics for extreme values of inclusion size. Int. J. Fatigue 11, 299–307. 11 Murakami, Y., Uemura, Y. and Kawakami, K. (1989). Some problems in the application of statistics extreme values to the estimation of the maximum size of non–metallic inclusions in metals. Transactions Japan Soc. Mechan. Engineering 55, 58–62. 12 Yates, J.R., Shi, G., Atkinson, H.V., Sellars, C.M. and Anderson, C.W. (2002). Fatigue tolerant design of steel components based on the size of large inclusions. Fatigue Fract. Engng. Mater. Struct. 25, 667–676. 13 Takahashi,

R. and Sibuya, M. (1996). The maximum size of the planar sections of random sheres and its application to metallurgy. Ann. Inst. Statist. Math. 48, 127–144, and Takahashi, R. and Sibuya, M. (1998). Prediction of the maximum size in Wicksell’s corpuscle problem. Ann. Inst. Statist. Math. 50, 361–377. 14 K¨ otzer,

S. (2006). Geometric identities in stereological particle analysis. Image Anal. Stereol. 25, 63–74.

Chapter 19

Life Science co–authored by E. Kaufmann1

In Section 19.1 we deal with the question whether human life spans are limited or unlimited. The celebrated Gompertz law will be central for our considerations. We particularly apply the results of Section 6.5, concerning penultimate distributions, to this question. Section 19.2 concerns the prediction of life tables by adopting a regression approach.

19.1

About the Longevity of Humans

We discuss the question whether the right endpoint of the life span df F of a population is inﬁnite, in other words, that the life span is unlimited. This is primarily done within the framework of extreme value analysis, yet we also ﬁt Gompertz and logistic distributions to extreme life spans.

Gompertz and Logistic Laws The Gompertz distribution is the classical life span distribution. The Gompertz law (called Gompertz–Makeham formula by Gumbel) postulates a hazard (mortality) rate h(x) = aebx . 0,µ,σ , called Gompertz df, Recall from page 54 that the converse Gumbel df G is the only df which satisﬁes the Gompertz law with µ = (log(b/a)/b and σ = 1/b. A theoretical explanation for the adequacy of the Gompertz distribution, based on the cellular aging phenomena of limited replicability and deceleration of the 1 University

of Siegen.

454

19. Life Science

process of mitosis, may be found in an article by Abernethy2 . Example 19.1.1. (Extreme Life Spans.) Our analysis concerns extreme life spans of women born before and around the year 1900 and later living in West Germany. The given data are the ages of female persons at death in West–Germany in the year 19933 . None of the persons died at an age older than 111 years. The analysis is based on the ages at death of 90 or older. Table 19.1. Frequencies of life spans (in years). life span

90

91

92

93

94

95

96

97

98

99

100

frequency 12079 10273 8349 6449 5221 3871 2880 1987 1383 940 579 life span

101

102

103

104

105

106

107

108

109

frequency

340

207

95

63

36

16

9

4

1

110 111 1

1

Thus, our analysis is based on a subgroup of our target population described at the beginning. Those who died before 1993 and were alive after 1993 are not included in the study. Yet, the extreme life spans within the subgroup are governed by the same distribution as those of the entire population under the condition that the birth rate was nearly homogeneous during the relevant period. This idea can be made rigorous by a thinning argument within the point process framework, see [43], pages 68 and 69. For that purpose, consider uniformly distributed dates of birth Vi over the relevant time period and add life spans Xi . The thinning random variable is deﬁned by Ui = I(1993 ≤ Vi + Xi < 1994). A Gompertz density with location and scale parameters µ = 83.0 and σ = 9.8 ﬁts well to the histogram of the life span data above 95 years, see Fig. 19.1.

If the Gompertz df is accepted, then life span is unlimited. This is in agreement with recent experiments which showed (see, e.g., Carey et al.4 about Mediterranean fruit ﬂies and the article by Kolata5 ) that the average life span and the oldest ages strongly depend on the living conditions. The insight gained from experiments and from a series of data sets may be summarized by the statement that “the studies are consistently failing to show any evidence for a pre–programmed limit to human life span,” as nicely expressed 2 Abernethy, J. (1998). Gompertzian mortality originates in the winding–down of the mitotic clock. J. Theoretical Biology 192, 419–435. 3 Stored in the ﬁle um–lspge.dat (communicated by G.R. Heer, Federal Statistical Oﬃce). 4 Carey, J.R., Liedo, P., Orozco, D. and Vaupel, J.W. (1992). Slowing of mortality rates at older ages in large medﬂy cohorts. Science 258, 457–461. 5 Kolata,

G., New views on life spans alter forecasts on elderly. The New York Times, Nov. 16, 1992.

19.1. About the Longevity of Humans

455

by J.W. Vaupel (cited by Kolata). Thatcher et al.6 suggest to ﬁt a logistic distribution to ages at death between 80 and 120. Such a modeling is very natural in view of the change in the population which can be observed around 95 years, and the fact that the logistic distribution is a certain mixture of Gompertz distributions with respect to a gamma distribution, cf. (4.11). The hazard function of a (converse) logistic df is given by h(x) = aebx /(1 + αebx ) with b = 1/σ, α = β and a = rβ/σ. It was observed by Kannisto7 and Himes et al.8 that there is already a close ﬁt to data in the special case where a = α which yields r = σ =: s. These distributions can be represented by the dfs Fs,µ (x) = 1 − (1 + exp((x − µ)/s))−s which have the densities fs,µ (x) = exp((x − µ)/s)/(1 + exp((x − µ)/s))1+s , where µ is a location parameter. In Fig. 19.1 (right) we give an illustration based on the same data as in Example 19.1.1. 0.05

0.05

0.04

0.04

0.03

0.03

0.02

0.02

0.01

0.01 0.0

0.0 90

100 life spans in years

110

90

100 life spans in years

110

Fig. 19.1. Histogram of life span data and (left) Gompertz density with parameters µ = 83, σ = 9.8, (right) logistic density fs,µ with parameters s = 7.25, µ = 98.6. 6 Thatcher, A.R., Kannisto, V. and Vaupel, J.W.. (1998). The Force of Mortality at Ages 80 to 120. Odense University Press. 7 Kannisto, V. (1992). Presentation at a workshop on old age mortality at Odense University. 8 Himes, C.L., Preston, S.H. and Condran, G.A. (1994). A relational model of mortality at older ages in low mortality countries. Population Studies 48, 269–291.

456

19. Life Science

For a logistic df there is again an inﬁnite upper endpoint. In addition, these dfs—just as the Gompertz dfs—belong to the pot domain of attraction of the exponential df which is a special case of a generalized Pareto (GP) df. In the subsequent lines, the statistical inference is done in the GP model.

Analyzing the Upper Tail of the Life Span Distribution Within the Generalized Pareto Model Aarssen and de Haan9 applied the standard pot–method to Dutch life span data (stored in um–lspdu.dat) and estimated a negative shape parameter. This yields that the estimated generalized Pareto (GP) df has a ﬁnite upper limit. These authors go one step further and compute conﬁdence intervals for the upper limit. In the subsequent example we also make use of the standard pot–method. Example 19.1.2. (Continuation of Example 19.1.1.) The sample mean excess function is close to a straight line for life spans exceeding 95 years; there is a stronger deviation from this line below 95.

0.6 3 0.4 2

0.2

1 90

100

life spans in years

110

90

100

110

life spans in years

Fig. 19.2. (left.) Sample mean excess function. (right.) Sample hazard function. The form of the mean excess function supports the conjecture that there is a long– living subpopulation which becomes visible beyond the age of 95 years (cf., e.g., the article of Perls (1995)). To a larger extent, our results merely concern this subpopulation. It is clear that a beta df will be estimated within the GP model. Guided by simulations, we decided to base the estimation on 2500 extremes (just life spans ≥ 98 are taken). The estimated shape parameter γ within the generalized Pareto (GP) model

9 Aarssen,

K. and de Haan, L. (1994). On the maximal life span of humans. Mathematical Population Studies 4, 259–281.

19.1. About the Longevity of Humans

457

is equal to −0.08. The right endpoint of the estimated beta distribution is equal to 122 years. This estimate ﬁts well to the worldwide reported life span of Mrs Jeanne Calment (122 years and 164 days) who was born in Arles (France) on Feb. 21, 1875 and died in Arles on Aug. 4, 1997.

The estimation of a negative shape parameter is in accordance with the result by Aarssen and de Haan. In contrast to these authors we do not conclude that human life span has a ﬁnite upper limit. Therefore, we also make no attempt to estimate such an upper limit in accordance with Gumbel10 who wisely refused to discuss this question. He suggested to estimate the “return value” F −1 (1 − 1/n) or the expected value E(Xn:n ) of the maximum Xn:n of a sample of size n . Using the concept of penultimate distributions one can show that an inﬁnite upper limit is well compatible with extreme value theory although we estimated a beta distribution. Another argument which speaks in favor of the exponential df can be found in an article by Galambos and Macri11 .

Gompertz Law and Penultimate Approximation 0,µ,σ with location and scale parameters µ = 83 and In Fig. 19.1 a Gompertz df G σ = 9.8 was ﬁtted to the upper tail of the given data of life spans. The following considerations are made under the hypothesis that this Gompertz df is the actual life span df. We still utilize our standard modeling, that is, actual truncated dfs are replaced by GP dfs. For that purpose we compute the parameters of ultimate and penultimate GP dfs according to the theoretical results in Section 6.5. The Gompertz df is truncated left of the threshold u = 98. According to (6.44) and (6.45), the approximating exponential df has the location parameter 0,µ,σ (u))/˜ g0,µ,σ (u) ≈ 2.12. u = 98 and the scale parameter σ(u) = (1 − G The penultimate approach, see (6.47) and (6.48), leads to a beta df with the same location and scale parameters as in the ultimate case, and the shape parameter

0,µ,σ (u)) = (1 − G 0,µ,σ )/˜ γ(u) = η(1 − G g0,µ,σ (u) ≈ −0.22. Plots of the densities show that the beta density is much closer to the truncated Gompertz density than the exponential density. Therefore, estimates based on exceedances of Gompertz data point to beta (GP2) dfs when the statistical inference is carried out in the GP model. Yet, estimating a beta df within the uniﬁed GP model does not necessarily yield that the actual upper endpoint (thus, the upper limit of life spans) is ﬁnite. 10 Gumbel, E.J. (1933). Das Alter des Methusalem. Z. Schweizerische Statistik und Volkswirtschaft 69, 516–530. 11 Galambos,

J. and Macri, N. (2000). The life length of humans does not have a limit. J. Appl. Statist. Science.

458

19. Life Science

In the case of a Gompertz df, the upper endpoint of the penultimate beta df is given by u+σ, which is equal to 107.8 for the parameters found above. This reveals that an approximation, measured in terms of the Hellinger distance, is not very sensitive to higher extremes. One may also ﬁt a penultimate df to the truncation of the Gompertz df beyond the threshold u = 111, the observed maximum life span in our example. This procedure is related to the approximation of Gompertz maxima by a penultimate EV df. Applying (6.47) again one gets a penultimate beta df with shape parameter γ(111) ≈ −0.06 and a right endpoint of 120.8. The conclusion is that the penultimate approach leads to signiﬁcantly higher accuracy than the approach by limiting dfs. In addition, the penultimate approximations reveal that a Gompertz hypothesis is compatible with estimated beta dfs within the framework of GP dfs.

19.2

Extrapolating Life Tables To Extreme Life Spans: A Regression Approach

Based on eleven German life tables from 1871 to 1986, we study the change of mortality rates of women over the time for ﬁx ages and apply a regression approach to predict life tables. In a second step, we extrapolate the tail of the life span distribution by ﬁtting a Gompertz distribution.

Introduction Life tables are used by actuaries to calculate the premium of an insurance policy (life or health insurance, rental scheme etc.). The basic terms of interest are the mortality rates that will be separately estimated for both sexes and each age up to 100. In the 1986 life table, the estimator of the mortality rate of a x years old women is based on female babies born around the year 1986 − x. Because people become older and older due to better standard of life, health care etc., the mortality rates of babies born today are overestimated. In the following we study mortality rates of women over the time for ﬁx ages and apply a regression approach to forecast life tables. In a second step, we extrapolate the tail of the life span distribution by ﬁtting a Gompertz distribution. For a general overview concerning the theory of life spans we refer to L.A. Gavrilov and N.S. Gavrilova12. For a women of x years born within the year t − x deﬁne the mortality rate qx,t as the (conditional) probability of death within one year. Denote by Ft−x the (continuous) life span distribution of a women born in the year t − x. Then, the 12 Gavrilov,

L.A. and Gavrilova, N.S. (1991). The Biology of Life Span: A Quantitative Approach. Harwood Academic Publishers, Chur (Russian edition by Nauka, Moscow (1986)).

19.2. Extrapolating Life Tables To Extreme Life Spans

459

theoretical mortality rate is qx,t :=

Ft−x (x + 1) − Ft−x (x) , 1 − Ft−x (x)

x = 0, 1, 2, . . .

(19.1)

In the statistical literature, the term mortality rate is often used as a synonym for hazard rate. In our considerations these terms have a diﬀerent meaning. The link between them will be given later. A natural estimate of qx,t is given by the empirical estimate qˆx,t which is deﬁned by the number of women born in t − x and dying at age between x and x + 1 divided by the total number of women born in t − x exceeding an age of x years. In practice, one takes a small number of years to calculate the estimates. The life span distribution of a women born within the year t can be derived from the mortality rates in a simple manner. We have 1 − Ft (x) =

x−1 j=0

x−1 1 − Ft (j + 1) = (1 − qj,t+j ), 1 − Ft (j) j=0

x = 0, 1, 2, . . .

(19.2)

Because the calculation of an individual premium is based on the unknown mortality rates in the future one has to ﬁnd a prediction procedure.

The Data Our investigations are based on eleven German life tables13 (consisting of estimated mortality rates qˆx,t ) from the year 1871 to 1986 dealing with ages up to 100. In Table 19.2 we list the mortality rates qˆx,t of women at ages x = 90, 100. Table 19.2. Mortality rates qˆx,t for women at ages x = 90, 100 taken from life tables at the years t. t

1871 1881 1891 1901 1910 1924 1932 1949 1960 1970 1986

qˆ90,t

.314

.306

.302

.296

.302

.263

.274

.259

.248

.234

.187

qˆ100,t

.518

.447

.446

.420

.476

.402

.476

415

.380

.405

.382

It should be noted that the life tables diﬀer from each other in methodology. The main diﬀerences concern the method of estimating mortality rates, smoothing techniques, the handling of special inﬂuences on mortality like the wave of inﬂuenza in 1969/70, and the number of years a life table is based on (e.g., 10 years (1871) and 3 years (1986)). In the following lines we ignore these diﬀerences and assume that the life tables consist of the empirical estimates as speciﬁed above. 13 Stored

in the ﬁles lm–lifem.dat for men and lm–lifew.dat for women (communicated by Winfried Hammes, Federal Statistical Oﬃce).

460

19. Life Science

Regression over Time Scatterplots of the mortality rates qˆx,t , for each ﬁxed age x plotted against the years t, indicate a decrease of exponential or algebraic order (see also Table 1). We assume a polynomial regression model for the log–mortality rates log qˆx,t for ﬁxed age x. Least squares polynomials of degree 2 ﬁt particularly well to the data. We have log qˆx,t ≈ pˆx,0 + pˆx,1 t + pˆx,2 t2 , where pˆx,0 , pˆx,1 and pˆx,2 are the estimated parameters. The following illustrations show plots of the log–mortality rates log qˆx,t as functions in t and the ﬁtted least squares polynomials of degree 2.

1900

1950 100 90

-2 80

-4

0

70

Fig. 19.3. Fitting least squares polynomials of degree 2 (solid lines) to log–transformed mortality rates (dotted).

It is obvious from Fig. 19.2 that linear regression curves—as used by Bomsdorf uhr15 do not adequately ﬁt the transformed data. The larger and Trimborn14 and L¨ reduction of mortality from the 1970 to the 1986 life table, which is also observed in newer abriged life tables16 may serve as another argument for the non–linearity of the log–mortality rates. We remark that the mortality itself decreases with a slower rate for higher ages (in contrast to the log–mortality). With the estimated polynomials px we estimate the theoretical mortality rates qx,t and the life span distribution Ft that is related to a cohort life table for women born in the year t. 14 Bomsdorf,

E. and Trimborn M. (1992). Sterbetafel 2000. Modellrechnungen der Sterbetafel. Zeitschrift f¨ ur die gesamte Versicherungswissenschaft 81, 457–485. 15 L¨ uhr,

K.–H. (1986). Neue Sterbetafeln f¨ ur die Rentenversicherung. Bl¨ atter DGVM XVII, 485–513. 16 Schmithals, B. and Sch¨ utz, E.U. (1995). Herleitung der DAV–Sterbetafel 1994 R f¨ ur Rentenversicherungen (English title: Development of table DAV 1994 R for annuities). Bl¨ atter DGVM XXII, 29–69.

19.2. Extrapolating Life Tables To Extreme Life Spans 0.4

1

0.5

461

1871

0.2 1991

1871 50

1991

60

100

80

100

Fig. 19.4. Estimated life span distributions (left) and estimated mortality rates (right) by interpolation (solid) and extrapolation (dotted) for women born in 1871, 1891, . . . , 1991.

Estimated life span distributions by interpolation means that the empirical estimators of the mortality rates are calculated within the period from 1871 to 1986 by interpolation.

Regression of Extreme Life Spans In the following we are interested in extreme life spans. We apply again a regression approach to ﬁt a parametric distribution to the mortality rates qˆx,t of ages x exceeding 90 (also see Section 19.1). Note that within the life tables diﬀerent smoothing techniques in the center as well as in the tail were applied. We assume that after the regression these manipulations are of no consequence for the general structure of the extreme life spans. Recall the relation between the theoretical mortality rates qx,t as deﬁned in (19.1) and the hazard rate. The latter one is deﬁned by ht (x) :=

ft (x) 1 − Ft (x)

where ft denotes the density of Ft . Then 1 − Ft (x + 1) = 1 − exp 1 − Ft (x)

qx,t+x = 1 − and, thus,

x+1

−

x+1

ht (s) ds x

ht (s) ds = − log(1 − qx,t+x ).

x

To ﬁnd a reasonable distribution that ﬁts to the upper tail of the life span distribution, we apply again visualization techniques. For 90 ≤ x ≤ 100, a scatterplot of points (x, log(− log(1 − qx,t+x ))) is close to a straight line. Notice that for

462

19. Life Science

a Gompertz distribution one has the hazard rate ht (x) = exp((t − µt )/σt )/σt and, thus, x+1 1 µt x −1 − + log exp log ht (s) ds = σt σt σt x is a straight line. We ﬁt a Gompertz distribution to the upper tail by the least square linear regression

ˆt x + ˆbt , x = 90, . . . , 100 (19.3) log − log(1 − qˆx,t ) ≈ a and obtain mortality rates qˆx,t for women of 101 years and older by extrapolation in (19.3) and the formula

at x + ˆbt ) , qˆx,t = 1 − exp − exp(ˆ

x = 101, 102, 103, . . .

The estimated mortality rates and the corresponding life span distribution functions for high ages are plotted in Fig. 19.5. 1

1

1871

0.5

0.5

1871 1991

80

1991

100

80

100

120

Fig. 19.5. Estimated life span distributions (left) and estimated mortality rates (right) with ﬁtted Gompertz tail by interpolation (solid) and extrapolation (dotted) for women born in the years 1871, 1891, . . . , 1991.

We include tabulated values of three estimated survivor functions F t = 1−Ft for t = 1901, 1921, 1991 given in Fig. 19.5 (left). Notice that the women born in 1901 achieved the age 96 in the year of writing this article17 . We see, for example, that the (estimated) probability of survival at the age of 96 years increases from .018 to .046 for the women born in the years 1901 and 1921. We do not believe that a reliable forecast can be given for longer periods by using such a straightforward extrapolation technique. Forecasts for more than one or two decades merely indicate the theoretical consequences of our modeling. 17 Reference

is given to Kaufmann, E. and Hillg¨ artner, C. (1997). Extrapolating life tables to extreme life spans: a regression approach using XPL. In: 1st ed. of this book, Part V, pages 245–250.

19.2. Extrapolating Life Tables To Extreme Life Spans

463

Table 19.3. Estimated probability of survival F t := 1 − Ft for women born in the years t = 1901, 1921, 1991. age x

90

92

94

96

98

100

102

104

106

108

F 1901 (x) .088 .057 .034 .018 .009 .004 .001 <.001 <.001 <.001 F 1921 (x) .174 .121 .078 .046 .024 .011 .004

.001

F 1991 (x) .664 .573 .466 .349 .232 .131 .059

.019

<.001 <.001 .004

<.001

The behavior of the mortality rates in Fig. 19.5 (right) is somewhat surprising. Primarily, it is not a result of the Gompertz (or converse Weibull) ﬁt or the regression approach of degree 2 instead of degree 1. It rather depends on the weaker trend of reduction of mortality for elderly people. Fig. 19.5 (left) seems to conﬁrm the ecological crisis hypothesis as reviewed (and rejected) in the above–mentioned book by Gavrilov and Gavrilova that states a biological limit for human life spans between 100 and 110 years. However, for a more detailed study it is essential, even in view of the existence of a long–living subpopulation visible behind an age of 95 years, cf. Perls18 and Section 19.1, to take empirical mortality rates of women exceeding 100 years into account. Notice that it is also possible to ﬁt a converse Weibull distribution. In this case the hazard rate is of the form atb . However, one obtains analogous illustrations for the converse Weibull distribution.

18 Perls,

T.T. (1995). Vitale Hochbetagte. Spektrum der Wissenschaft, M¨ arz 3, 72–77.

Appendix: First Steps towards Xtremes and StatPascal

Appendix A

The Menu System A.1

Installation

Xtremes is a genuine Windows application so that any system running Windows 98 (and newer) or NT 4 (and newer) is also capable of executing Xtremes. To facilitate the installation, the CD–ROM contains an installation program that copies all required ﬁles to your computer. The installation program starts automatically when you insert the CD–ROM. One may choose an installation directory and select certain optional parts of the system. If you are unsure, we recommend to accept the default options. Please make sure that you are logged in as an administrator when installing under Windows NT/2000/XP/2003 or Windows Vista 32–Bit. Xtremes is deinstalled in the usual manner; i.e., by executing the option Software in the Windows Control Panel. Please consult the Xtremes User Manual for further information; a pdf version is accessible from its menu entry in the Xtremes section of the Windows start menu.

A.2

Overview and the Hierarchy

Xtremes is a statistical software system that possesses graphics facilities, a facility to generate and load data, an arsenal of diagnostic tools and statistical procedures, and a numerical part for Monte–Carlo simulations. The development of Xtremes has been supported by Simon Budig (UserFormula facility), Martin Elsner (HTML help), Andreas Gaumann (help system), Sylvia Haßmann (censored data), Andreas Heimel (help system, ARMA estimators), Jens Olejak (minimum distance estimators), Wolfgang Merzenich (consultation on the StatPascal compiler), Reinhard Pfau (Linux port), Torsten Spillmann (XGPL plots), Karsten Tambor (early version of the multivatiate mode), and Arthur B¨ oshans, Carsten Wehn, Lars Fischer, Ralf Pollnow (MS Excel frontend) whose help is gratefully acknowledged.

468

A. The Menu System

The illustration on the right–hand side shows the hierarchy of the Xtremes system: • Univariate and Multivariate Modes: the system is partitioned into a univariate and a multivariate mode that can be selected in the toolbar. • Domains D(iscrete), SUM, MAX and POT: select certain domains in the toolbar which correspond to diﬀerent parametric models (discrete, Gaussian, extreme value (EV) or generalized Pareto (GP)) built for discrete data and data that are sums, maxima or exceedances (peaks–over–threshold). • The Menu–Bar: select menus for handling and visualizing data, plotting distributions by analytical curves, estimating parameters etc. The Visualize menu and larger parts of the Data menu are independent of the diﬀerent domains. • Menus: commands of the system are available in diﬀerent menus. • Dialog Boxes: if a menu command requires further parameters, a dialog box is displayed. • Graphics Windows: the result of a menu command is usually displayed in a graphics window. • Local Menus: options and commands that are speciﬁc to a particular window or dialog box are provided by means of a local menu (available with a right– click somewhere in the window or the dialog box). • Special Facilities: in the toolbar, select tools to manipulate a graphic. These tools change the action taking place when one drags the mouse in a graphics window. For example, to change the coordinate system, you may click on the in the toolbar and, then, pull up a rectangle. coordinate tool • Help System: a context–sensitive online help is available by pressing the F1– key at any time besides the general help facility (option Index in the Help menu). • Act, $, Hyd Supplements: special options for insurance, ﬁnance and hydrology (Chapters 14–17) are available. • UFO: select the UserFormula facility to enter your own formulas to plot curves, generate or to transform data (cf. Section A.5). • StatPascal: the integrated programming language StatPascal is activated by means of the SP button (cf. Appendix B and StatPascal User Manual). Keep in mind that the options in the Visualize and Estimator menus must be applied to an active data set (read from a ﬁle or generated in the Data menu). Instructions about the installation of the system are given in Section A.1.

A.2. Overview and the Hierarchy

469

470

A. The Menu System

Professional Version For details concerning the professional version of Xtremes we refer to the web–site http://www.stat.math.uni-siegen.de/xtremes/. Under this web–site one is also informed about the latest news about Xtremes and possible updates.

A.3

Becoming Acquainted with the Menu System

A further possibility is to work closely with the online–help facility (press the F1–key or enter the Help... Index).

Plotting Histograms and Curves Xtremes provides easy–to–use plotting facilities. The user can quickly plot a curve, adjust the coordinate system, get a list of the curves displayed in a plot window or export the picture via the clipboard. A special facility is available for producing EPS–ﬁles (see Documenting Illustrations on page 478). We partly repeat the operations which are required to plot the histograms in Fig. 1.2. Make sure that the univariate D(iscrete) domain is active, that is, the and the button labeled is ﬁrst button in the toolbar shows a single bullet pressed. Demo A.1. (Plotting Poisson Histograms.) (a) Select the option Distribution... Poisson in the univariate D(iscrete) domain and choose the parameter λ = 10. Execute the Histogram option. tool (activating the option mouse mode) may be employed to adjust the (b) The positions of the plotted bars.

The user may change the parameters of a plotted histogram (or of a curve) by means of sliders which are an indispensable tool to work interactively with from the toolbar and click data. Select the parameter varying mouse mode onto a histogram or curve in a plot window to open a window with sliders for each parameter. Demo A.2. (Varying the Parameter of a Poisson Histogram.) First, plot a Poisson histogram with parameter λ = 1. Select the parameter varying mouse mode from the toolbar and click on the histogram of the Poisson distribution. Vary the parameter λ, and also change the boundaries for the possible parameter values. In Fig. A.1 there is a Poisson histogram with the pertaining slider and, in addition, a sample histogram.

A.3. Becoming Acquainted with the Menu System

471

Fig. A.1. Interactive ﬁtting of a Poisson histogram (right) to sample histogram (left).

Next, let us display a Pareto density on the screen. Now, activate the univariate POT domain, that is, the ﬁrst button in the toolbar shows a single bullet and the button labeled is pressed. Demo A.3. (Plotting a Pareto Density.) Select the menu option Distribution... Pareto to open a dialog box asking for the parameters of the distribution The dialog box for the Pareto distribution is displayed in Fig. A.2. Click on the Density button to plot the Pareto density for the chosen parameters. A plot window opens showing the graph of the density.

Fig. A.2. Dialog box POT... Distribution... Pareto in the univariate mode. Enter the parameters of the Pareto distribution and plot a curve using the buttons.

The coordinate system can be adjusted by using the local menu of the window. Click inside the window with the right mouse button and select the option Change coordinates. Xtremes stores the previous coordinates which may be restored by executing the option Restore coordinates in the toolbar (click the button) or by pressing the Backspace key. A more direct, interactive facility to modify the coordinate system is available by selecting a certain mouse mode from the tool bar (explained in the next subsection). One can get an overview of the curves plotted in a window utilizing the

472

A. The Menu System

menu option Edit Curves and Labels. A list with all curves is displayed, and one can delete some curves or change their options like color, line style, brushes used to hatch histograms, etc. If one wants to know the parameters of a plotted curve, and click onto the curve. select the information mouse mode tool Pictures may be exported. Click the option Print in the local menu to send your window to the printer. You can also copy it to the Windows clipboard or create EPS–ﬁles. Advanced options to format a plot are described on page 478.

Selecting a Mouse Mode The mouse mode determines what happens if you click into a window. The default mode just brings a window into the foreground. Other mouse modes are employed to move or delete curves, change colors and plot options, add text, etc. Detailed explanations of all modes are given in Section A.4. As an example, we describe the change of the coordinate system using a speciﬁc mouse mode. Activate the coordinate changing mouse mode by clicking tool in the toolbar. In this mode, a new coordinate system is selected by the pulling up a rectangle: click into the graphics window (left mouse key), hold down the mouse key and move the cursor to the opposite corner. The rectangle may be pulled outside the window to enlarge the coordinate system.

Reading and Generating Data At the beginning, the user should restrict himself to handling data included in the package or generated by Xtremes. To read a data set from the disk, execute the menu option Data... Read Data. The ﬁle dialog box of Windows appears. Proceed to the dat folder and select any ﬁle. Xtremes loads this ﬁle and opens a window entitled Active Sample displaying information about the data set. Read another data set and notice that the description of the active data set changes. Now, two data sets are kept in memory. One can choose the active data set from the ones already loaded by executing the menu option Data... Choose Data. A list of all data sets used in the current session is displayed and a new active data set can be selected. Keep in mind that all visualization and estimation procedures are based on the active data set. If one needs to load multiple data sets from a diﬀerent subdirectory, the Drag and Drop facility of Xtremes can be utilized. Just select the ﬁles in a directory listing of Windows and drop them anywhere on the Xtremes window. Xtremes also enables the user generating data sets. Use the menu option Data... Generate Univariate Data and select a distribution from the menu (see Demo A.4). A dialog box opens asking for parameters, the sample size and a ﬁlename. Files are stored in the active directory of Xtremes.

A.3. Becoming Acquainted with the Menu System

473

After clicking OK the data set is generated and a short description appears in the Active Sample window.

Visualization of Data A simple way to display data is in the form of a text. Load a data set or generate one using Data... Generate Data and select the menu option Data... List Data. Then, Xtremes opens a text window showing your data set. You can use the scroll bar to browse the data. The Visualize menu contains options to display sample dfs, qfs, histograms, scatterplots, mean and median excess functions, among others. Kernel Density also provides options that reﬂect the data points at the right, left or both ends of the support. The bandwidth can be chosen by the user, an automatic selection (via cross–validation) is available. The visualization options are also available in the local menu of a List Data window. They are applied to the displayed data set (rather than the active one) if selected from the local menu. An easy way to work with more than one data set is therefore to list them, minimize the windows and work with the local menus. Time series (see Section A.4 for a description of the diﬀerent types of data sets used in Xtremes) are visualized by means of the scatterplot option. Note that each scatterplot is displayed in a separate window. You can cut points from a . The option scatterplot using the point selection (scissors) mouse mode tool Least Squares Polynomial in the local menu of the scatterplot window leads to a dialog box for polynomial regression. The scatterplot option is also applicable to multivariate data. Depending on the active mode (univariate or multivariate), the user has to select two or three components. In the latter case, the points are displayed using a 3–D dynamic plot.

Applying Estimators to the Active Data The three chapters in Part II of this book correspond to four diﬀerent domains of Xtremes called D(iscrete), SUM, MAX and POT. Each domain provides diﬀerent distributions and estimators in the Data... Generate Univariate Data, Distribution and Estimate menus. One may switch between the diﬀerent domains by means of the buttons D(iscrete), POT, MAX and SUM in the toolbar. In the following example, we focus on estimators in the POT domain because it provides the richest facilities.

474

A. The Menu System

Demo A.4. (Estimation Using the Hill Estimator.) To start, let us apply the Hill estimator to standard Pareto data. (a) First, create a data set using Data... Generate Univariate Data... Pareto(GP1). (b) Next, execute the option Estimating... Hill(GP1/GP2) . Recall that generalized Pareto models are ﬁtted to the upper tail of the distribution. Therefore, the estimator requires the number k of upper extremes to be used for the estimation. You can change the number of extremes by clicking the up or down arrows in the estimator dialog box. ˆn,k as a function in k is obtained using the diagram option. Choose (c) A plot of α ˆ n,k or σ the desired parameters before clicking the button.

Various parametric curves (plotted with the estimated parameter values) can be selected from the estimator dialog box. Comparing these curves with the corresponding nonparametric ones, the user is able to judge visually the quality of the estimation. Similar dialog boxes are provided within the MAX and SUM domains. One can work with the other parts of Xtremes while estimator dialogs are open. It is also possible to use two or more estimators at the same time to compare their results.

The Toolbar The toolbar below the main menu provides a quick access to frequently used options of Xtremes. The tools enable the user to select diﬀerent parametric distributions in the main menu. They are also used to select a mouse mode. We start with the tools already described in the Overview. Switch menu bar from univariate to multivariate mode. Switch menu bar from multivariate to univariate mode. Activates pulldown menus for discrete models. Activates pulldown menus for Gaussian models. Activates pulldown menus for extreme value (EV) models. Activates pulldown menus for generalized Pareto (GP) models. Opens pulldown menu with options for hydrology data (Chapter 11). Opens pulldown menu with options for insurances data (Chapter 12).

A.3. Becoming Acquainted with the Menu System

475

Opens pulldown menu with options for ﬁnance data (Chapter 13). Opens pulldown menu providing UFO facilities. Opens StatPascal Editor Window to enter and run StatPascal programs. Next the tools are listed that are not described in the Overview. Opens ASCII–editor window. Opens the Windows ﬁle dialog box and loads a data set. The ﬁle dialog box provides options to delete or copy ﬁles. The active data set is displayed in a text window. Restores coordinate system in active window to the size before the last change. The toolbar is also used to select a mouse mode. The mouse mode determines the action taking place when the user clicks into a window or onto a curve1 . Standard mouse mode: no special actions occurs. Option mouse mode*: changes display options of a curve (e.g., color, line styles, number of supporting points, etc.). The actual dialog box depends on the type of the curve. Parameter varying mouse mode*: opens window with sliders for each parameter of a curve. Parameters are changed dynamically while sliders are dragged. Clipboard mouse mode*: • moves the curves to the Xtremes clipboard window. When this mode is applied in the Xtremes clipboard window, the systems asks for a destination window; • a curve can be directly dragged to a diﬀerent plot window (also to a scatterplot window), if the left mouse button is kept pressed until the cursor is located in the destination window. Deleting mouse mode*: deletes curves from a plot window. 1 Mouse

modes, where one must click onto a curve, are marked with *.

476

A. The Menu System Information mouse mode*: displays parameters of curve. Coordinate changing mouse mode: adjust the coordinate system by pulling up a rectangle or, in the trivariate setup, rotate the coordinate system. Point selection mouse mode: use this mode to cut oﬀ points in a bivariate scatterplot. Options of the local menu of a scatterplot do not use the cut points. Line drawing mouse mode: adds straight lines to a plot window. Label mouse mode: adds text labels to a plot. See page 478 for details. Curve tabulating mouse mode*: the supporting points of a curve can be tabulated by storing them into a bivariate data set. For that purpose, adjust the coordinate system and the number of supporting points (enter the Change Coordinates box to adjust the range of to select the number the supporting points and use the option tool of supporting points).

A.4

Technical Aspects of Xtremes

This section discusses two technical aspects of Xtremes, namely the format of data sets and the mechanisms provided to export graphics.

Format of Data Sets Data sets are stored as plain ASCII ﬁles. Certain speciﬁcations can be given at the top of the ﬁle, such as the type of the data set and the sample size. Moreover, one may include a shorter and a more detailed description. Data sets can be entered by utilizing any text editor available under MS– DOS or Windows. It is possible to use the integrated editor, yet one should be aware of the fact that Windows 95/98 and ME limits the text size of the editor to 64 KBytes. Under Windows NT/2000/XP and Vista 32–Bit, text ﬁles of arbitrary size can be handled. We start with an example showing the data entry using the integrated editor. Suppose you want to create a univariate data set with the following values: 1, 3.5, 7, −4. Start the editor by selecting the editor button in the toolbar and click on the Header button in the toolbar of the editor window. A dialog box asking for the type of the data set opens. Select Univariate Data to create a template of a univariate data set and ﬁll in the following ﬁelds:

A.4. Technical Aspects of Xtremes

477

Xtremes Univariate Data Type: Artificial example \begin(description) This is an artificial data set. It was entered using the integrated editor. \end(description) Sample Size: 4 1 3.5 7 -4 17 The ﬁrst line deﬁnes the type of the data set—in the present case Xtremes Univariate Data. A list of all types is given below. The second line starts with Type: and provides a short description which will be shown in the list of loaded data sets (Data... Choose Data). It is also added to the description of curves based on this data set. The description must be restricted to one line. Between the lines \begin(description) and \end(description), a longer description may be added. It is displayed in the Active Sample window. The next line determines the size of the data set. Then, the data are listed, one value for each line. After having typed the text, save it to a ﬁle (e.g., in the subdirectory \dat). Afterwards, your data set becomes the active one. One may also simulate a data set of the desired type using the option Generate... . Xtremes particularly supports the following data types. • Xtremes Univariate Data. Real data x1 , . . . , xn in any order, as presented above. Execute Data... Transform Data... Sort to sort these data according to their magnitude. • Xtremes Time Series. Pairs (i, xi ) of integers i and reals xi as, e.g., 1

17.5

2

−2

3

0.34

4

0.001

The discrete time must be given in increasing order. Some of the pairs (i, xi ) can be omitted (see, e.g., ct–sulco.dat), so that the entry Sample Size is not necessarily the number of data points within the ﬁle. It may be larger than the time of the last point if values were omitted at the end of the ﬁle. • Xtremes Multivariate Data. Multivariate data (xi,1 , . . . , xi,m ) are stored using m entries on a line.

478

A. The Menu System Moreover, the line after Sample Size contains an entry deﬁning the dimension m of the data set. It is followed by m names surrounded by quotation marks. They deﬁne the headers for the corresponding column, e.g., Sample Size: 12 Dimension: 4 “Month”

“SO2”

“NO”

“O3”

1

75.2

13.4

17.2

2

83.1

17.9

15.4

3

.

12.8

11.3

4

43.9

15.3

11.3

Missing values are indicated as a dot. It is possible to combine related univariate data sets of diﬀerent length to one multivariate data set. The rows containing a dot are ignored when the multivariate data set is transformed or converted. • Data Sets Without Header. Xtremes can also load plain ASCII ﬁles containing just a matrix of data, without any headers. Such data sets are treated as multivariate. Moreover, one can use decimal points or decimal commas within a data set. Discrete, grouped and censored data types are also available. Please consult the Xtremes User Manual for details. Data can be converted from one type into another by the option Data... Convert to. All canonical conversions are available. There are also some special conversions. One can apply the UserFormula facility to perform transformations not covered by the menu system. More sophisticated conversions are accomplished by means of StatPascal programs.

Documenting Illustrations Xtremes provides various tools to change the outer appearance of a plot and to export it to other systems. We start with a description of advanced plot options (like diﬀerent colors and line styles) that are used to prepare pictures for exporting. The following options are available: • Coordinate System: the coordinate system is either displayed within the window or on a rectangle around the actual plot area. These options are controlled in the Change Coordinates box of the local menu. The portion of the plot area may be changed to provide space for the attachment of labels outside the frame using the Frame Size option.

A.4. Technical Aspects of Xtremes

479

is used to change • Line Styles and Colors: the option mouse mode tool the plot options of a curve. A left–click onto the curves opens a dialog box (cf. Fig. A.3). The user may select – predeﬁned line styles, – deﬁne his own line style by specifying the length of curve segments and gaps as well as the thickness of the curve. For example, choose the values – 1 and 1 to produce a dotted line, – 4 and 4 to produce a dashed line. These procedures lead to a better result on printed pages than the use of predeﬁned line styles (except of the solid line). Diﬀerent sizes and hatch styles are provided for histograms. The local menu of a scatterplot window provides the Options entry to change the point size. and click at the position • Adding Text: select the label mouse mode tool where you want to put your label. The font and position of the text may be and option mouse mode tools. changed using the parameter varying It is possible to display vertical text or to move a label to the edge of the window. Labels are treated like curves, so they may be moved to another window or deleted in the same way. The box for curve options is presented in the following Fig. A.3. We suggest to use the solid line option or the “line” and “gap” facility.

Fig. A.3. Specify your own line style in the input ﬁelds “line” and “gap”.

The contents of an Xtremes plot window may be exported, either by printing a window, saving it as an EPS (Encapsulated Postscript) ﬁle or storing it in the Windows clipboard.

480

A. The Menu System

• Printing: ﬁrst, select the option Frame Size (Print/EPS) (cf. Fig. A.4) from the local menu of the active window to deﬁne the size of the picture and provide space for the frame (see the next Demo A.1). Then, select Print to copy the contents to your printer. Printer Setup is utilized to change options of the printer. • Saving an EPS ﬁle: ﬁrst, set the size of the picture and frame, as in the previous case. Then, select Save as EPS ﬁle to store the contents in the EPS format. Xtremes asks for a ﬁlename. • Copying to the clipboard (Option Copy to Clipboard in the local menu): the contents of the active window are copied to the clipboard in the standard bitmap format. It is possible to insert the contents of the clipboard in other applications like painting programs or word processors.

Fig. A.4. Frame Size (Print/EPS) dialog box. The user selects the size of the coordinate system and provides space for text displayed outside the actual picture.

In the following demo further explanations are provided about the dialog box in Fig. A.4. Demo A.5. (Printing a Graphics Window.) Select the Frame Size (Print/EPS) option from the local menu and enter the size of your picture in the dialog box. The values shown in Fig. A.4 entail a picture of the size 72mm × 52mm, the actual plot area comprises 60mm × 40mm. After that, proceed with the Print option to copy the active window to your printer or select Save as EPS ﬁle to create an EPS ﬁle that can be included in other documents. LATEX–users may employ the epsf macro package, which provides commands to include postscript ﬁles into LATEX documents (e.g., the commands \epsfxsize=72mm \epsfbox{picture.eps} load picture.eps and scale it to a horizontal size of 72mm).

A.5. The UserFormula (UFO) Facilities

A.5

481

The UserFormula (UFO) Facilities

With UserFormula (UFO), the user can type in formulas that are used • to evaluate expressions using a calculator; • to plot univariate or bivariate curves; • to generate data sets; • to transform existing data sets. The formulas are entered by using the notation of common programming languages. We give an overview of the functions that are available in UserFormula expressions and describe the options of the UserFormula menu, which opens after in the toolbar. Operations that are too complicated clicking the UFO button for UserFormula may be handled by using the integrated programming language StatPascal, introduced in Appendix B.

Overview One can access all distributions implemented in Xtremes by calls to predeﬁned functions. There are three diﬀerent groups of predeﬁned functions. • Standard mathematical functions like abs(x) (absolute value), exp(x) (exponential function), log(x) (natural logarithm) or sqrt(x) (square root), among others. • Function calls—partly including a shape parameter a—under which one may generate data, such as betadata(a) or gumbeldata. The returned values are independent for successive calls and governed by the respective distribution in its standard form. In addition, [0, 1)–uniform data may be called by the function random. • Functions for densities, qfs and dfs (again partially including a shape parameter a) such as: – betadensity(a,x), betadf(a,x), betaqf(a,x); – gaussiandensity(x), gaussiandf(x), gaussianqf(x); etc. The last curve plotted within an Xtremes plot window is available under the name actualcurve. The chapter Library Functions within the StatPascal User Manual gives a detailed description of all predeﬁned functions that are available within the UserFormula facility.

482

A. The Menu System

Calculator The calculator allows the user to type in a formula and evaluate it. Fig. B.5 shows the calculator dialog box.

Fig. A.5. Calculator dialog box. Formulas typed in the upper edit ﬁeld are evaluated. The lower edit ﬁeld deﬁnes variables and functions also available in other parts of Xtremes.

In the lower part of the calculator window, you can deﬁne your own functions and variables. Write your deﬁnitions in the edit ﬁeld User Deﬁned Functions and click on the =–button. The deﬁnitions thus made are available within all dialog boxes providing a UserFormula facility. They can also be used in all edit ﬁelds where a real value is expected, e.g., in the dialog boxes used for plots of parametric curves. For example, a Gaussian density including a location parameter is deﬁned in the following way: Pi:=3.1415 gauss(mu,x):=1/sqrt(2*Pi)*exp(-(x-mu)**2/2) The formulas are stored in the ﬁle formula.txt within the working directory. They are loaded again upon the next start of Xtremes.

Plotting Curves The graph of a function x → f (x) or x → f (p, x) may be plotted in every graphics window. The optional parameter vector p = (p1, p2, p3) is changed by using the . Instead of p1 one may also use p. Within parameter varying mouse mode tool the multivariate mode, a surface plot of a function (x, y) → f (x, y) is performed. Demo A.6. (Plotting Gaussian Densities with Varying Location Parameter.) Click in the toolbar and select the option Plot curve from the popup the UFO button menu. Now, type the formula 1/sqrt(2*3.1415) * exp(-(x-p1)**2/2) in the edit ﬁeld labeled f(x) or f(p,x) in the dialog box. If you have entered the deﬁnitions shown in the Calculator box, you can also write gauss(p1, x).

A.5. The UserFormula (UFO) Facilities

483

Especially note the option for the destination window. Xtremes lists all open windows, and you can also enter the name of a new window. Select OK to plot the curve.

Generating Data The UserFormula facility may be employed to generate univariate data sets. Click the UFO button and select the option Generate Data... A dialog box similar to the one used for plotting curves is utilized. Now, the user must specify a quantile function (qf) Q(x) that is applied to [0, 1)–uniform data. For example, use -log(x) to generate standard exponential data. Data distributed according to the distributions implemented in Xtremes is available by means of the predeﬁned functions *data (where * is replaced by the name of the distribution). For example, one might also write exponentialdata in the above example.

Transforming Data The UserFormula facility oﬀers the transformation of univariate or multivariate data sets and time series. When you select the option Transform Data... in the UFO menu, Xtremes asks for a transformation depending on the type of the active data set. • Univariate Data xi : specify a transformation T to generate the data T (xi ). • Time Series (ti , xi ): specify two functions T1 (t, x) and T2 (t, x) to obtain the time series values (T1 (ti , xi ), T2 (ti , xi )). Note that real–valued times are allowed. • Multivariate Data (xi,1 , . . . , xi,m ): specify transformations Tj . The system generates (T1 (xi,1 , . . . , xi,m ), . . . , Tk (xi,1 , . . . , xi,m )). In addition to the transformation, one must specify k names for the columns of the transformed data set. See Demo B.8.

Demo A.7. (Smoothing a Data Set Using Polynomial Regression.) Convert the data set to a time series, display a scatterplot and add a regression polynomial. Now, the polynomial is available as actualcurve. Therefore, one can apply the transformation T1 (t, x) = t and T2 (t, x) = actualcurve(t) to store the values of the polynomial, evaluated at the times t of the original time series.

484

A. The Menu System

Fig. A.6. Transform Data dialog box for multivariate data. The transformation in (12.39) is applied to football.dat (with changed signs).

Demo A.8. (UFO Transformation of Multivariate Data.) Read football.dat (cf. Example 8.2.1) and change the signs (Data... Transform Data... Change Signs). Choose UFO and apply Transform Data. The dialog box Transform Data lists the column names X1 and X2 of the current data set on the left–hand side (see Fig. B.6) together with the variable names x1 and x2 assigned to the values in the columns. In the edit ﬁeld on the right–hand side, the user must deﬁne the names of the ith column (using the arrow button one may edit a template of the transformation T (x1 , x2 ) = (x1 , x2 )). In our example, we use the names Goalpost and Endzone and add the transformed variables -(-x1/12)**1.2 and -(-x1/12)**1.2. Finally, press OK to execute the transformation.

Appendix B

The StatPascal Programming Language To enhance the ﬂexibility of the system beyond the possibilities of the UserFormula facility, it is supplemented by the integrated Pascal–like programming language StatPascal. StatPascal programs are handled in the StatPascal editor winbutton. dow which can be opened by selecting the Exaggerating a bit, one can say that the pull–down menu system serves as a platform for learning the speciﬁc functions and procedures available in StatPascal. Thus, many options in the menus and dialog boxes have their counterparts as functions in StatPascal. When a StatPascal program is executed, use the implemented • dialog boxes, • plot windows and a StatPascal window for the output. One may also attach StatPascal programs to the menu bar which provides a facility to extend the menu system. We assume that the reader has a working knowledge of the Pascal language. In contrast to other common statistical languages, StatPascal is a strongly typed language which is compiled and executed by an abstract stack machine. StatPascal is therefore usually faster than other systems. The StatPascal User Manual contains a formal description of the syntax and an alphabetical list of all library functions. The ﬁrst chapters of the StatPascal User Manual also include an introduction to basic (Pascal) programming techniques. The installation program copies a pdf version of the StatPascal User Manual and Reference to the ﬁle spmanual.pdf in the sp subdirectory.

486

B.1

B. The StatPascal Programming Language

Programming with StatPascal: First Steps

This section enables the user to take the ﬁrst steps into the StatPascal environment. We mention the StatPascal editor and introduce some simple programs.

The StatPascal Editor button within the A StatPascal editor window is opened by selecting the toolbar. It provides the usual editing facilities of Windows. Text blocks can be exchanged by means of the clipboard utilizing the commands listed in Appendix A. Under Windows 95, the maximum ﬁle size of the editor window is limited to 64 KBytes. The toolbar enables the user to save and load text ﬁles. The Run option is a short cut for the compilation and execution of a program. Fig. B.1 shows the StatPascal editor window, where the following tools are available.

New: erases the text within the StatPascal editor window. Load: opens the ﬁle dialog box and loads a StatPascal program. Save: writes the text in the StatPascal editor window to a disk ﬁle. If no ﬁlename has been provided, the Save as option is activated. Save as: writes the text in the StatPascal editor window to a disk ﬁle after asking for a ﬁle name. Run: compiles and executes the program in the StatPascal editor window. Compile: compiles a program and stores the resulting binary under a ﬁlename, executes it or locates the position of a runtime error with the source ﬁle. Compiler Options: opens the Compiler Options dialog box, controlling parameters of the compiler and runtime environment. Help: opens the StatPascal online help.

B.1. Programming with StatPascal: First Steps

487

The “Hello, World” Program We start with the traditional “Hello, world” program to demonstrate the techniques of entering, compiling and running a StatPascal program. The user will immediately recognize that the program looks like its Pascal equivalent. program hello; begin writeln (’Hello, world!’) end. and click the Run button Type in the program, save it to a ﬁle (Save as, to execute the program. If the program contains no errors, Xtremes opens the StatPascal window displaying the output.

The StatPascal Window The procedures write, writeln and read of the Pascal language are provided to perform input and output operations in the StatPascal window. In Fig. B.1, we see a program in the StatPascal editor window and its output in the StatPascal window.

Fig. B.1. StatPascal editor window with example program (front) and its output in the StatPascal window (back).

The example program asks for real numbers t and displays the Gaussian density ϕ(t). The predeﬁned routines MessageBox, DialogBox and MenuBox (which are described in the StatPascal manual) provide an alternative using dialog boxes.

Data Types and Structures StatPascal provides most of the data types and data structures of the Pascal language. The predeﬁned types

488

B. The StatPascal Programming Language boolean, char, integer, real and string

are available, and the user can deﬁne new types using all data structures of Pascal (with the exception of variant records). Our examples use only the predeﬁned data types in conjunction with the standard Pascal data structure array and the new data structure vector which is introduced below.

Elements of a StatPascal Program A StatPascal program consists of up to eight diﬀerent sections. In the following table, we give a short explanation of the diﬀerent sections of a program. As one could see from the previous example programs, most of these sections are optional. program name; uses ... ; label ... ; const ... ; type ... ; var ... ; procedure ... ; function ... ; begin ... end.

a StatPascal program starts with the reserved word program, followed by the name of the program the optional uses lists libraries which are used by the program the optional label starts the declaration of the labels the optional const deﬁnes constant values the optional type is used to assign names to user deﬁned data types (see page 489) the optional var declares the variables used in a program an arbitrary number of functions and procedures may be declared (see page 489) the mandatory main program contains the instructions performed by the program

A tutorial on basic programming techniques with an introduction to standard Pascal can be found in the StatPascal manual.

Vector and Matrix Types StatPascal implements a new data structure vector which is similar to the array structure. Yet, one does not have to specify the number of elements when declaring a vector. A vector type is deﬁned using the declaration vector of type. We start with a simple example which shows the usage of a real vector. The following program generates a Gaussian data set of size 100 under the location and scale parameters 2 and 3, and stores the data in the vector x. Then the sample mean and sample variance of the simulated data set are displayed.

B.1. Programming with StatPascal: First Steps

489

program example; var x: vector of real; begin x := 2 + 3 * GaussianData (100); writeln (mean (x), variance (x)) end. Readers who are familiar with other statistical languages should note that the usual arithmetic and logical expressions (with componentwise operations) as well as index operations are supported. Vectors can also be used as arguments and return types of functions. The language provides implicit looping over the components of a vector if a function operates on the base type of a vector structure. The following program demonstrates further vector operations. We perform a numerical integration of a real–valued function f , deﬁned on the interval [a, b], using the approximation b n

f (ci ) + f (ci+1 ) b − a f (x) dx ≈ 2 n a i=1 where ci = a + (i − 1)(b − a)/n for i = 1, . . . , n + 1. The function f as well as the parameters a, b and n are provided as arguments. type realfunc = function (real): real; function integrate (f: realfunc; a, b: real; n: integer): real; var fc: vector of real; begin fc := f (realvect (a, b, n + 1)); return sum (fc [1..n] + fc [2..(n+1)]) * (b-a) / (2*n) end; We start with a type declaration for the functional parameter. The ﬁrst assignment within the function integrate calculates the values f (ci ), i = 1, . . . , n + 1 and stores them in the variable fc. Note that the call to the predeﬁned function realvect returns a real vector with n + 1 equally spaced points between a and b, which is given as an argument in the call of f. In the second statement, we generate two integer vectors containing the values from 1 to n and from 2 to n + 1, which serve as indices to fc. The index operation yields two real vectors with the values (f (c1 ), . . . , f (cn )) and (f (c2 ), . . . , f (cn+1 )). The + operator adds these vectors componentwise, and the predeﬁned function sum calculates the sum of the components of the resulting vector. Finally, the value of the integral is returned. Next, we deﬁne a function square and calculate its integral.

490

B. The StatPascal Programming Language function square (x: real): real; begin return x * x end; begin writeln (integrate (square, 0, 1, 100)) end.

(* 0.33335 *)

The data structure matrix represents two–dimensional arrays where the number of rows and columns are determined at run time. The language provides an implicit conversion from two–dimensional arrays to matrices. One can also construct a matrix using the predeﬁned function MakeMatrix, which ﬁlls a matrix with the components of a vector. Matrices can be used in arithmetic operations. The multiplication of two matrices or of a matrix and a vector perform the usual mathematical matrix operations. As an example, we show a program that prints 100 random variables simulated under a bivariate Gaussian distribution with covariance matrix ⎞ ⎛ 1 0.2 ⎠. Σ=⎝ 0.2 1.5 Note that chol (S) returns a matrix C such that S = CC t . program bivgauss; var S, C: matrix of real; i: integer; begin S := MakeMatrix (combine (1.0, 0.2, 0.2, 1.5), 2, 2); C := chol (S); for i := 1 to 100 do writeln (C * GaussianData (2)) end. Consult the StatPascal Reference Manual for further information about vectors and matrices.

B.2

Plotting Curves

StatPascal allows the user to open an Xtremes plot window and to display curves and scatterplots in it. These windows and curves exactly act like the ones available from the menu system. In the following, we only discuss univariate curves and scatterplots. The sp subdirectory of the Xtremes directory contains various example programs that demonstrate the graphical facilities of StatPascal.

B.2. Plotting Curves

491

Univariate Curves Xtremes provides a predeﬁned function plot which is utilized to plot univariate curves. The function requires two vectors containing the points xi and values yi , the destination window and a description of the curve. A linear interpolation of the given points is displayed. For example, the following program plots a Gaussian density in two Xtremes plot windows. program gaussplot; const n = 100; var x, y: vector of real; begin x := realvect (-3, 3, n); y := gaussiandensity (x); plot (x, y, ’Density 1’, ’Gaussian density’); plot (x, y, ’Density 2’, ’Gaussian density’) end. Fig. B.2 shows the output of the program. Two Xtremes plot windows (Density 1 and Density 2) are opened by calls to plot. The curves are displayed as solid black lines. One can change the plot options using the procedures listed at the end of this section.

Fig. B.2. The program gaussplot and its output in two Xtremes plot windows.

Scatterplots The scatterplot procedure, displaying scatterplots, is similar to the plot procedure. The routine requires three parameters: two arrays deﬁning the points and the name of the scatterplot window. In the above example, the call to plot must be

492

B. The StatPascal Programming Language

replaced by scatterplot (x, y, ’Scatterplot’) to obtain a scatterplot of the points (x1 , y1 ), . . . , (xn , yn ).

B.3

Generating and Accessing Data

An important facility of StatPascal is the implementation of routines for data generation and data transformation not covered by the menu system or UserFormula. In this section, we introduce functions and procedures to exchange data between StatPascal and Xtremes. Data stored in a StatPascal program (e.g., in a vector) are not used directly within Xtremes, and data sets loaded in Xtremes are not used by StatPascal automatically. Instead, all data transfer is accomplished by calling predeﬁned functions and procedures. They give the user access to the active data set from within a StatPascal program and allow to pass data collected in a StatPascal vector to Xtremes, thus creating a new active data set. We start with an example for generating standard Pareto data under the shape parameter α = 1. program Pareto; const n = 100; alpha = 1.0; var x : vector of real; begin x := paretodata (alpha, n); createunivariate (x, ’pareto.dat’, ’Description’) end. Here n Pareto data are generated independently by the function paretodata and stored in the vector x. The call to createunivariate passes the data to Xtremes, that is, the data set stored in x is saved to the ﬁle pareto.dat which is then the active one. In addition, a short comment is added. After having run the program, all options of the menu system can be applied to the new data set.

Passing Data from StatPascal to Xtremes We now provide a more systematic description of the generation of data sets by StatPascal. Four diﬀerent procedures are provided to pass data collected in a vector from StatPascal to Xtremes. In the following examples, the data are saved to ﬁlename.dat in the working directory. One may create data sets of the following types. Xtremes Univariate Data: data x1 , . . . , xn are collected in a real vector given as argument to the call of the predeﬁned procedure createunivariate. var x: vector of real; ...

B.3. Generating and Accessing Data

493

createunivariate (x, ’filename.dat’, ’Description’); Instead of a vector, a one–dimensional real array may be given as well. Xtremes Time Series: in addition to the previous case, a vector containing the times ti of the observations must be provided. var

x : vector of real; t : vector of integer;

... createtimeseries (t, x, ’filename.dat’, ’Description’);

Xtremes Censored Data: besides a real vector containing the censored data, there is an integer vector with the censoring information. var

z : vector of real; delta : vector of integer;

... createcensored (z, delta, ’filename.dat’, ’Description’); Xtremes Multivariate Data: the data xi,j are collected in a real matrix. In addition, a string with the column names, separated by ’|’, must be provided. var x: matrix of real; h: string; ... h := ’Day|Month|...’; createmultivariate (x, h, ’filename.dat’, ’Description’); Note that a two–dimensional array can be provided instead of a matrix type, because the language supports an implicit type conversion from two–dimensional arrays to matrix types. As a result of such a procedure you will get an active data set of the type as speciﬁed by the command create.... The Active Data window opens showing the name of your data set and the description provided in the last argument.

Passing Data from Xtremes to StatPascal Next, let us consider the case where active data are dealt with by StatPascal. The active data set is accessed by means of the following functions: samplesize

size of the active data set;

dimension

dimension of the active data of type Xtremes Multivariate Data. This function can also be applied to univariate data or a time series, yielding 1 or 2, respectively;

494

B. The StatPascal Programming Language

data(i)

xi:n if x1 , . . . , xn are Xtremes Univariate Data. Use the function call data(i,1) to access the unsorted data;

data(i,j)

xi,j if (x1,1 , x1,2 ), . . . , (xn,1 , xn,2 ) is the active time series. Multivariate data are dealt with in the same way. If a grouped data set is active, then data(i,1) returns the cell boundary ti and data(i,2) the frequencies ni in cell [ti , ti+1 ). Moreover, censored data are treated like multivariate data with the censored data in the ﬁrst component, the censoring information in the second and the weights of the Kaplan–Meier estimate in the third one;

columndata(i)

vector with the (unsorted) data in the ith column of the active data set;

rowdata(i)

vector with the data in the ith row of the active data set;

columnname(i)

name of the ith column. This function yields an empty string if not applied to a multivariate data set.

Demo B.1. (Translation of a Univariate Data Set.) We employ StatPascal to add the value 5 to univariate data. Note that the vector structure allows us to deal with data sets of any size. program translation; var x: vector of real; begin x := columndata (1); createunivariate (x + 5, ’demo.dat’, ’’) end. We used the function call columndata (1) to access the unsorted data set.

Author Index A Aarssen, K., 456 Aitchison, J., 245 Akashi, M., 442 Akgiray, V., 179, 374 Anderson, C.W., 145, 450, 451 Andrews, D.F., 85, 161 Ashkar, F., 120, 138, 341 Atkinson, H.V., 451 B B¨ uhlmann, H., 5, 425 Bachelier, L.J.B.A., 374 Bahr von, B., 434 Baillie, R.T., 373 Balakrishnan, N., 160 Balkema, A.A., 27 Barbour, A.D., 9 Barndorﬀ–Nielsen, O.E., 119 Basrak, B., 398 Becker, R., 272 Beirlant, J., 137, 193, 195, 198 Benjamin, J.R., 109 Benktander, G., 156 Beran, R.J., 88 Berkowitz, J., 408 Bhattacharya, G.K., 302 Bhattacharya, R.N., 268 Black, F., 374 Bob´ee, B., 120, 138 Bollerslev, T., 395 Bomsdorf, E., 460 Booth, G.G., 179, 374 Breidt, F.J., 400 Brockwell, P.J., 68, 168, 220, 223 Brown, L.D., 88 Brush, G.S., 358 Buishand, T.A., 113

C Caeiro, F., 197, 204 Carey, J.R., 454 Caserta, S., viii, 371, 395 Castillo, E., 118 Changery, M.J., 121 Cheng, B.N., 289 Chernick, M.R., 169 Christoph, G., 174 Cleveland, W.S., 69, 271 Cohen, A.C., 160 Coles, S.G., viii, 116, 322, 331, 450 Cornell, C.A., 109 Cottis, R.A., 441 Cowing, T.G., 303 Cox, D.R., 119 Cs¨ org˝ o, S., 138, 306 D Dan´ıelsson, J., 395 Datta, S., 220 Davis, R.A., 68, 168, 169, 220, 221, 223, 398, 400 Davison, A.C., 121, 142, 240, 334, 342, 357 Daykin, C.D., 43 de Haan, L., 19, 23, 27, 134, 145–147, 189, 196, 198, 204, 208, 398, 456 Deheuvels, P., 138, 320 Dekkers, A.L.M., 134 Devroye, L., 38 Diebold, F.X., 238, 374, 407 Diebolt, J., 132, 155 Dierckx, G., 193, 198 Dietrich, D., viii, 145 Drees, H., vi, 33, 52, 135, 138, 146, 147, 192, 195, 198, 207, 210, 216, 219, 320, 448 Drosdzol, A., 276

496 Dubey, S.D., 111, 123, 134 Dunsmore, I.R., 245 E Efron, B., 91 Einmahl, J.H.J., 134 El–Aroui, M.–A., 132, 155 Embrechts, P., 401, 432, 434 Enders, W., 373 Engle, R.F., 395 F Falk, M., viii, 23, 135, 189, 234, 238, 272, 300, 313, 332 Fan, J., 403, 409 Ferreira, A., 147 Feuerverger, A., 193, 198 Figueiredo, F., 204, 206 Fill, H.D., 351 Fiorenti, M., 122 Fisher, R.A., 18, 47, 171, 187 Fofack, H., 176 Fraga Alves, M.I., 196, 206 Frey, R., 401 Frick, I., v Frick, M., 321, 326, 328 G G¨ anssler, P., 235 Galambos, J., 7, 23, 32, 118, 186, 293, 457 Gangopadhyay, A.K., 239 Garrido, M., 132, 155 Gavrilov, L.A., 458 Gavrilova, N.S., 458 Geﬀroy, J., 293 Gelder, van P., viii Gene Hwang, J.T., 88 Genest, C., 275 Gentleman, J.F., 10 Gerber, H.–U., 412 Girard, S., 132, 155 Glynn, P.W., 155 Gnedenko, B.V., 19 Gogebeur, Y., 193 Goldie, C.M., 185 Gomes, M.I., v, viii, 143, 189, 190, 192–194, 196, 197, 201, 204, 206, 208 Gompertz, B., 54

Index Goovaerts, M.J., 430 Guillou, A., 198 Gumbel, E.J., 117, 457 Gunther, T.A., 238, 407 H H¨ usler, J., v, viii, 23, 144, 145, 147, 169, 234, 238 Haight, F.A., 9 Hall, P., 185, 193, 198 Hamilton, J.D., 68 Hampel, F.R., 34, 89, 118 Hashofer, A.M., 143 Hashorva, E., 296 Haßmann, S., 129 Heﬀernan, J.E., 322, 323, 331 Herzberg, A.H., 85, 161 Hesselager, O., 255 Heyde, C., v Hill, B.M., 129 Hipel, K.W., x, 3 Hipp, C., 432 Hlubinka, D., 449 Hogg, R.V., 50 Holst, L., 9 Hosking, J.R.M., viii, 119, 120, 337 Houghton, J.C., 120 Hsing, T., 169, 208 Huang, X., 317, 320 Huber, P.J., 89 I Ishimoto, H., 442 J Jansen, U., 114 Janson, S., 9 Jenkinson, A.F., 16 Joe, H., 275, 297, 308 Johnson, N.L., 111, 117, 285 Jorion, P., 372, 382 K K¨ otzer, S., 451 Kannisto, V., 455 Kasahara, K., 444 Katz, R.W., vi, 353, 358, 359, 362, 365

Author Index Kaufmann, E., vi, viii, 138, 182, 186, 189, 195, 198, 235, 256, 313, 326, 328, 445, 453 Kawakami, K., 451 Kimball, B.F., 117 Kinnison, R.P., 121 Kl¨ uppelberg, C., 432 Klugman, S.A., 50, 435 Koedijk, K.G., 179 Kogon, S. M., 178 Kolata, G., 7, 454 Komukai, S., 444 Konecny, F., 342 Kotz, S., 111, 117, 285 Kowaka, M., 442 Kozek, A., vi, 401 Kremer, E., 412 Kuczera, G., 349 Kuon, S., 413, 425 Kupiec, P. H., 408 L L¨ uhr, K.–H., 460 Laycock, P.J., 441, 444 Leadbetter, M.R., 23, 145, 168, 169 Ledford, A.W., 322, 324, 331 Lee, L., 301 Li, D., v, 144, 146, 147 Liedo, P., 454 Lindgren, G., 23, 145 Ling, S., 220 Little, R.J.A., 274 Loretan, M., 375 Lu, J.–C., 301 Lungu, D., viii M Macri, N., 457 Madsen, H., 351 Mandelbrot, B.B., 374 Manteiga, W.G., 91 Marohn, F., 119, 144, 189, 272 Marron, J.S., 46 Martins, M.J., 193, 194, 201, 206 Masamura, K., 442 Mason, D.M., 138 Matsunawa, T., 99 Matthys, G., 193

497 McCormick, W.P., 169, 220 McCulloch, J.H., 178, 289 McFadden, D., 303 McMahon, P.C., 373 McNeil, A.J., 401, 417 Mendon¸ca, S., 206 Michel, R., 432 Mikosch, T., 226, 275, 398, 432 Miranda, C., 206 Mises von, R., 16 Montfort, van M.A.J., 120, 143 Murakami, Y., 451 N Nachtnebel, H.P., 342 Nandagopalan, S., 169 Naveau, P., 358, 362, 365 Neves, M., 193, 201 Nolan, J.P., viii, 172, 175, 176, 178, 285, 289 North, M., 342 O Orozco, D., 454 Otten, A., 120 P Panorska, A., 289 Pantula, S.G., 209 Parlange, M.B., 358, 362, 365 Peng, L., 192, 220 Pentik¨ ainen, T., 43 Pereira, T.T., 135 Pericchi, L.R., 109 Perls, T.T., 456 Pesonen, M., 43 Pestana, D., 197 Pfanzagl, J., 329 Pfeifer, D., viii, 117 Phillips, P.C.B., 375 Pickands, J., 27, 134 Pictet, O., 225 Prescott, P., 134 Pruscha, H., 61 R R´emillard, B., 275 R´ev´esz, P., 209

498

Index

Raaij, de G., 389 Rachev, S.T., 289 Radtke, M., viii, 189, 411, 413, 425 Rao, R.R., 268 Rasmussen, P.F., 138, 342 Raunig, B., 389 Reich, A., 413, 425 Reiss, R.–D., 23, 33, 34, 52, 121, 129, 132, 138, 140, 169, 186, 192, 198, 234, 238, 276, 293, 300, 313, 326, 328, 332, 342, 448 Resnick, S.I., 169, 189, 198, 220, 221, 398 Rice, J.A., 94 Robinson, M.E., 141 Rodrigues, L., 204 Rodriguez–Iturbe, I., 109 Ronchetti, E.M., 34, 89, 118 Rootz´en, H., 23, 145, 342, 398 Rosbjerg, D., 138, 342, 351 Rosenblatt, M., 234 Ross, W.H., 116 Rossi, F., 122 Rousseeuw, P.J., 34, 89, 118 Rousselle, J., 121, 341 Rubin, D.B., 274 Rytgaard, M., 129

Stˇ aricˇ a, C., 198, 220, 225 Stahel, A.W., 34, 89, 118 Stedinger, J.R., 351 Stephens, M.A., 120 Stork, P.A., 179 Stoyan, D., 114 Stoyan, H., 114 Straub, E., 414 Stute, W., 235

S S´ anchez, J.M.P., 91 Sarabia, J.M., 118 Scarf, P.A., 441, 444 Sch¨ utz, E.U., 460 Schmithals, B., 460 Schnieper, R., 415 Scholes, M., 374 Schupp, P., 405 Seal, H.L., 5 Seifert, B., 179 Sellars, C.M., 451 Serﬂing, R.J., 87, 281 Shi, G., 451 Shibata, T., 441 Shorack, G.R., 163 Sibuya, M., 74, 293, 451 Simonoﬀ, J.S., 46 Smith, R.L., 111, 117, 121, 141, 142, 147, 185, 240, 305, 334, 342, 355, 357, 358

U Uemura, Y., 451 Usuki, H., 451

T Tajvidi, N., 315, 342 Takahashi, R., 451 Tarleton, L.F., 359 Tawn, J.A., 141, 305, 322, 324, 331 Tay, A.S., 238, 407 Taylor, S., 373, 400 Teugels, J.L., 137, 195 Thatcher, A.R., 455 Thomas, M., 129, 132, 276, 342 Tiago de Oliveira, J., 293, 305 Tippett, L.H.C., 18, 187 Todorovic, P., 121, 249 Trimborn, M., 460 Tsay, R.S., 262 Tsuge, H., 442

V Vaquera, H., viii, 140 Vaupel, J.W., 454, 455 Veraverbeke, N., 434 Versace, P., 122 Villase˜ nor, J.A., viii, 140 Viseu, C., 206 Vries, de C.G., viii, 179, 371, 395, 396, 398 Vylder, de F., 426, 430 Vynckier, P., 137, 195 W Walden, A.T., 134 Wallis, J.R., 120 Walshaw, D., 116 Wang, Z., 143 Wehn, C.S., vi, 401, 409

Author Index Weiss, L., 134, 183 Weissman, I., 143 Wellner, J.A., 163 Welsh, A.H., 185, 306 Whitmore, G.A., 10 Wicksell, S. D., 445 Wiedemann, A., 276 Williams, D. B., 178 Wolf, W., 174 Wood, E.F., 120, 337 X Xin, H., 289 Y Yao, Q., 403, 409 Yates, J.R., 451 Yuen, H.K., 305 Z Zeevi, A., 155 Zelenhasic, E., 249 Zolotarev, V.M., 175 Zwiers, F.W., 116

499

Subject Index A Aggregation, 170 Angular component, 283, 311 Annual maxima method, 10, 138 Approximation EV, of maxima, 18 GP, of exceedance df, 27, 183 normal of gamma distributions, 122 of sums, 30 penultimate, 187–189, 257 Poisson in a multinomial scheme, 152 of binomial distribution, 8, 9 of exceedances, 249 of negative binomial distribution, 99 Asset prices, 5, 371 Auto–tail–dependence function, 76, 325 sample, 76, 325 Autocorrelation function, 72 Autocovariance function, 72, 166, 167 sample, 72 Automatic choice of bandwidth, see Cross–validation of number of extremes, 137 B Bartlett correction in EV model, 119 in GP model, 144 Bayes risk, 102, 244 Beta function, 126 Bias, 61, 89 –reduction, 190 Black–Scholes model, 374 price, 392

Blocks method, see Annual maxima method Bootstrap parametric, df, 91 sample, 92, 431 C Calendar eﬀect, 373 Canonical dependence function, 317 Censoring ﬁxed, type–I, II, 160 random, 160 Central limit theorem, 30 Characteristic function, 173 Cluster size distribution, 78, 208 mean, 77, 208 reciprocal, see Extremal index Clustering of exceedances according to blocks deﬁnition, 77 runs deﬁnition, 77 Condition extreme value, 145 Hall, 185, 198 Poisson(Λ, F ), 258 Poisson(λ,F ), 248 von Mises, 56, 186, 449 Weiss, see δ–neighborhood of a GP df Conditional density, 228 posterior density as, 244 distribution, 12, 228 of exceedances, 234 of order statistics, 234 expectation, 50, 165, 230, 395 Bayesian estimator as, 244 covariate, 241 serial, 241

501

502 independence, 230, 245, 312 mean function, 241 q–quantile, 231 covariate, 241, 261 function, 241 serial, 241 variance, 166, 231, 395 Conﬁdence interval, 90 bootstrap, 91, 115, 431 for functional parameter, 91 Contour plot, 269 Copula, 275 empirical, 277 Correlation coeﬃcient, 267 Covariance, 71, 165 matrix, 267 sample, 71, 270 Covariate, 238, 355 Critical region, 93 Cross–validation, 46 Cycle, 354 D Data, 6 American football (NFL), 306 declustered, 78, 209, 252, 341 deseasonalized, 70 exceptional athletic records, 141 exchange rate black market, 179 British pound vs U.S. dollar, 375 Swiss franc vs U.S. dollar, 381 ﬁre claim Danish, 417 from UK, 42 Norwegian, 415 of industrial portfolio, 421 ﬂoods of Feather River, 109 of Moselle River, 70, 338 generation of, by building mixtures, 38 polar method, 38 quantile transformation, 38 grouped, 152 Iceland storm, 114 liability insurance, 152 maximum pit depth, 442

Index maximum temperature at de Bilt, 113 at Furnace Creek, 67 maximum wind–speeds at Jacksonville, 121, 163 at Vancouver, 10, 48 multivariate, 274 missing, 67, 70, 274 number of car accidents, 100 ozone at Mexico City, 140 in San Francisco Bay Area, 308 pooling of, 343 spatial, 273 stock market, 375 tensile strength of sheet steel, 117 TV watching, 46, 59 velocity of light (Michelson), 85 δ–neighborhood of a GP df, 183 Density, 7 kernel, 45 for censored data, 163 Density, multivariate, 268 kernel, 271 representation of, by d–fold partial derivative, 268 Dependence serial, 71, 208 Distance Hellinger, 88, 184, 239, 257 L2 –, 88 Distribution(s) Benktander II, 156 beta (GP2), 24, 38, 124 beta, two–parameter, 126 binomial, 8 Burr, 156 as a mixture, see Distribution(s), mixture of, converse Weibull Cauchy, 27, 38, 170, 172, 174 χ2 –, 123, 170 convolution of, 30 double–exponential, see Distribution(s), Laplace elliptical symmetric, 287 endpoint of

Subject Index

503

exponential, 154 left, 12 right, 11 Pareto, 154 Poisson, 98, 249 Erlang, 123 multinomial, 95 exponential, 122 exponential (GP0), 24, 37 negative binomial, 14, 99, 250 extreme value (EV) normal, 17, 31, 172, 174 ﬁtting, to maxima, 57 ﬁtting, to data, 59 two–component, 121 kurtosis of, 31 fat–tailed, 31, 32 mixture of, 31, 32, 59, 379, 389 Fr´echet (EV1), 15, 37, 38 of maximum, 10 function (df), 7 of heterogeneous random variables, 10 marginal, 267 of minimum, 11 sample, 39 Pareto (GP1), 24, 37, 38, 124 gamma, 104, 106, 122, 125 as a mixture, see Distribution(s), mixconvolution of, 122 ture of, exponential mean of, 104 Pearson–type III, see Distribution(s), reciprocal, 104, 172 gamma variance of, 104 penultimate, 187, 189 Gaussian, see Distribution, normal Poisson, 9 generalized Cauchy, 33 ﬁtting, to discrete data, 59 generalized gamma, 125 predictive, 245 double, 126 proﬁt/loss, 384 generalized logistic, 123 Rayleigh, 22, 54 generalized Pareto (GP), 23 regional frequency, 345 ﬁtting, to exceedances, 57 Student, 33, 95, 170, 179, 379, 396 geometric, 13, 27, 99, 145 noncentral, 285 Gompertz, 11, 22, 37, 54, 124, 458, 462 with n degrees of freedom, 94, 170 GP–Gamma, 125 sum–stable, 172, 379 GP–Gamma 2, 124 unimodal, 15 Gumbel (EV0), 10, 15, 37, 124 Wakeby, 120 half–normal, 126 Weibull (EV2), 15, 38 heavy–tailed, 30, 69 Distribution(s), multivariate super, 154 elliptical, 282, 296 L´evy, 126, 172 function (df), 266 Laplace, 396 sample, 270 leptokurtic, see Distribution(s), fat–tailed limiting, of Gumbel type II, see Distribution(s), multivariate, Gumbel–McFadden exceedances, 27 Gumbel–McFadden, 301, 307 maxima, 18 H¨ usler–Reiss, 295, 307 minima, 22 log–normal, 281 sums, see Central limit theorem Marshall–Olkin, 294, 306 log–gamma, 124, 125 normal (Gaussian), 280, 281 log–normal, 32, 186, 349, 396 spherical, 282, 296, 312 log–Pareto, 154 Student, 283, 285, 390 logistic, 123, 455 sum–stable, 285 mixture of, 32, 123, 154, 233 Domain of attraction converse Weibull, 156

504

Index max–, 18 pot–, 27, 30, 184

in exponential (GP0) model, 84, 128 in Fr´echet (EV1) model, 110 in GP model, 134 E in Gumbel (EV0) model, 108 Equation in multivariate normal model, 281 AR, 166 in negative binomial model, 100 ARMA, 167 in Poisson model, 96 stochastic linear diﬀerence, see also Time mean squared error (MSE) of, 89, 102, series, AR(p), 164 191 Ergodic theory, 209 minimum distance (MD) Estimator in EV model, 111 Bayes, 102, 103, 242 in normal model, 88 for exponential model, 105 moment for GP 1 model, 129 in GP model, 134 bias of, 89 in Gumbel (EV0) model, 108 diagram of, 136 in negative binomial model, 99 Drees–Pickands (GP), 134 in normal model, 86 Hill nonparametric density, see Density, kerMLE in GP1(u, µ = 0), 129 nel bad performance of, 130, 132, 136, Pickands (2–dim EV), 306, 307 184, 211, 212, 381 quick, in normal model, 87 bias–reduced, 194, 203, 205 reduced–bias, 190 MLE in GP2(u), 133 unbiased, 89 in AR–model Euclidean norm, 282 Yule–Walker, 168 Euler’s constant, 21, 108 in ARMA–model Exceedance(s), 8, 138 Hannan–Rissanen, 168 df, 12 innovations algorithm, 168 for Poisson(λ, F ) process, 249 MLE, 168 number of, 8 in GP model time, see Time, arrival for degrees, 344 Excess, 49 Kaplan–Meier, 162 df, 49, 53 L–moment, 348 function least squares, in normal model, 87 mean, 50 linear combination of ratios of spacmedian, 53 ings (LRS) sample mean, 52, 456 in EV model, 111 trimmed mean, 52, 180 in GP model, see Estimator, Drees– Expected shortfall, 385 Pickands (GP) conditional, 406 M– Extremal index, 79, 168 for scale parameter, 88 Extreme value index, 208 in exponential (GP0) model, 89, 128 Extremes in Pareto (GP1) model, 129 conditional, 238 maximum likelihood (ML) in normal model, 85 F for censored data, 164 Forecast, see Prediction Fubini theorem, 235 in beta (GP2) model, 133 for conditional distributions, 235 in EV model, 111

Subject Index

505

G Location and scale parameters, 16, 36 Gamma function, 19, 104 vectors, 279 Lowess, see Regression, local weighted Gompertz law, 54, 453 Gumbel method, see Annual maxima method M Matrix H orthogonal, 282 Hazard transposed, 266 function, 53 unit, 280, 282 cumulative, 53 Maxima, 9 reciprocal, 55 of GP random variables, 29 sample, 55, 456 McSize, see Cluster size, mean rate, 53, 458 Mean Histogram number of exceedances, see Mean, value of discrete distribution, 9, 470 function Poisson, 97 of binomial distribution, 8 sample, 44, 97 of EV distribution, 20 Homogeneity property, 304 of gamma distribution, 122 Horror case, 19 of GP distribution, 30 I of negative binomial distribution, 99 Index ﬂood, 344, 345 of Poisson distribution, 9 Innovation algorithm, see Simulation, of ARMA sample, 41 time series value function, 8, 18 Intensity, 248, 262, 447 of homogeneous Poisson process, 248 function, 259 of inhomogeneous Poisson process, measure, 259, 262, 447 258 of P´ olya–Lundberg process, 250 J vector, 266 Jackknife method, 193 sample, 270 Minima, 11, 110, 117 K Mode(s), 15 Kendall’s τ , 267, 284 of EV distributions, 21 Kurtosis, 31 Model Poisson–GP, 153 L Poisson–Pareto (Poisson–GP1), 152 L–CV, 347 Moments L–kurtosis, 347 centered, 20 L–moment ratios, 347 of EV distributions, 19 L–moments, 86, 346 of GP distributions, 29 L–skewness, 347 sample, 41 L–statistic, 87 Mortality rate, see Hazard, rate Lag, see Time, lag Moving averages, 66 Leadbetter’s mixing conditions, 168 Nadaraya–Watson, 66 Least squares method, 64, 65 Legendre polynomials, 346 N Level, T –year, 12, 13 Newton–Raphson iteration, 171 Likelihood O function, 84, 103

506 Order statistics, 12, 40, 141, 234 Outlier, 47 P P–P plots, 63 p–value, 93, 95, 96, 330 Parameter canonical, 299, 300, 307 tail dependence, 75, 300, 316 Parameterization α– of EV distributions, 15 of GP distributions, 24 γ– of EV distributions, 16 of GP distributions, 25 Partial duration values, see Exceedances Peaks–over–threshold, see Exceedance(s) Pickands dependence function, 327 Polynomial, MA and AR, 167 Posterior density, 103, 244 Power function, 330 Prediction, 235, 244 linear, 245 Predictive density, 238 distribution, 237, 406 in Bayesian framework, 245 VaR, 406 Prior conjugate, 104–106 density, 102 Probability weighted moments, 346 Probable maximum loss (PML), 419 Process counting, 248, 415 P´ olya–Lundberg, 250 point, 259 Poisson, 247, 262 homogeneous (Poisson(λ)), 248 inhomogeneous (Poisson(Λ)), 258 mixed, 249 white–noise, 164, 397 Q Quantile(s), 35 bivariate, 269

Index extreme, 208 function (qf), 35, 120 sample, 42 sample, 42 Quantile–Quantile (Q–Q) plot, 61 EV, 62, 112 GP, 62 normal, 62 R Radial component, 282, 311, 328 Random variables uncorrelated, 71, 267 Regression ﬁxed design, 65 local weighted, 69 slope, 64 Regularly varying, 182, 186 Reinsurance treaty ECOMOR, 411 excess–of–loss (XL), 4, 411 stop–loss, 411 Reproductivity pot– of Benktander II distributions, 157 of converse truncated Weibull distributions, 157 sum– of gamma distributions, 122 Residual life df, see Excess, df mean, function, see Excess, function, mean Residuals, 69 Return period, see Time, interarrival Returns, 5, 371 volatility of, 377 Risk contour plot, 430 process, 412 RiskMetrics, 400 Robust statistics, 34, 88, 128, 129 Rotation, 282 Run length, see Clustering, of exceedances according to, run deﬁnition S Scatterplot, 48

Subject Index 3–D, 273 Seasonal component, 69 Self–similarity, 170, 171 Separation, seasonal, 120 Service life, 441 Simulation of ARMA time series, 168 Skewness coeﬃcient of EV distributions, 21 sample, 41, 119 Slowly varying, 183, 186 Spacings, 120 Spectral expansion diﬀerentiable, 326 Stability max–, 19 min–, 23 pot–, 25, 182 sum–, 31, 126, 172, 174 STABLE, 173 Standard deviation, 21 Stationarity covariance–, see Stationarity, weak strict, 165, 207 of Gaussian time series, 165 weak, 72, 165, 397 StatPascal accessing active data with, 493 editor, 486 generating data with, 492 plots, 490 Reference Manual, 485 Vector Types, 488 window, 487 Strength of material, 7 of bundles of threads, 7 of material, 110, 117 tensile, 117 Survivor function, 11, 54 marginal, 267 multivariate, 266 T T –day capital, 7 T –unit depths, 6, 7 T –year discharge, see Level, T –year

507 T –year initial reserve, 7, 430 Tail behavior, 355 dependence coeﬃcient of, 322 dependence/independence, 75, 328 testing for, 329 probability, 52 Test χ2 – for EV models, 120 in multinomial model, 95, 98 goodness–of–ﬁt, 61 for EV models, 120 for Poisson model, 97 likelihood ratio (LR) in EV model, 118 in GP model, 144 in multinomial model, 96, 98 selection of null–hypothesis, 329 t–, in normal model, 94 UMP, in normal model, 94 Theorem Balkema–de Haan–Pickands, 27 Falk–Marohn–Kaufmann, 189 Fisher–Tippett, 18 Tiago de Oliveira–Geﬀroy–Sibuya, 292 Threshold, 8 random, 138 T –year, 4 for heterogeneous random variables, 251 given a Poisson process, 252 median, 251 Time arrival, 13, 247 for mixed Poisson process, 250 Pareto, 250 early warning, 430 interarrival, 13 exponential, 247 lag, 72 ruin, 429 Time series AR(p), 166, 221 ARCH(p), 397, 399 ARMA(p,q), 167, 210

508 causal, 167 GARCH(p,q), 210, 224, 400, 401, 403 Gaussian AR(1), 73, 165, 325, 326 MA(∞), 167 MA(q), 166 Cauchy, 166 Gaussian, 166 Transformation probability, 38, 234, 235, 407 quantile, 38 Rosenblatt, 234, 407 theorem for densities, 280 Wicksell, 446 Trend, 354 U UFO, 481 calculator, 482 Utility function, 303 maximizing, 304 V Value–at–Risk (VaR), 384 conditional covariate, 262 serial, 401, 409 Variance of binomial distribution, 8 of EV distribution, 20 of gamma distribution, 122 of GP distribution, 30 of negative binomial distribution, 99 of Poisson distribution, 9 of Student distribution, 33 sample, 41 Varying function regularly, 326 slowly, 323 Vector transposed, 266 Volatility, 374 W Wicksell’s corpuscle problem, 33, 445 X Xtremes

Index clipboard, 475, 480 data format, 476 generating, 472 missing, 478 reading, 472 types, 477 editor, 476 illustrations, 478 installation, 467 mouse mode, 475 coordinate changing, 468, 472 information, 472 label, 479 option, 470, 479 parameter varying, 470, 479, 482 point selection (scissors), 473 overview, 467 plots, 470 printing, 480 starting, 470 system requirements, 467 toolbar, 470, 471, 474

Bibliography [1] Baillie, R.T. and McMahon, P.C. (1989). The Foreign Exchange Market: Theory and Econometric Evidence. Cambridge University Press, Cambridge. [2] Beirlant, J., Teugels, J.L. and Vynckier, P. (1996). Practical Analysis of Extreme Values. Leuven University Press, Leuven. [3] Best, P. (1998). Implementing Value at Risk. Wiley, Chichester. [4] Bob´ee, B. and Ashkar, F. (1991). The Gamma Family and Derived Distributions Applied in Hydrology. Water Resources Publications, Littleton. [5] Brockwell, P.J. and Davis, R.A. (1987). Time Series: Theory and Methods. Springer, New York. [6] Castillo, E. (1988). Extreme Value Theory in Engineering. Academic Press, Boston. [7] Christoph, G. and Wolf, W. (1992). Convergence Theorems with a Stable Limit Law. Akademie Verlag. Berlin. [8] Cleveland, W.S. (1993). Visualizing Data. Hobart Press, New Jersey. [9] Coles, S. (2001). An Introduction to the Statistical Modeling of Extreme Values. Springer, London. [10] Daykin, C.D., Pentik¨ ainen, T. and Pesonen, M. (1994). Practical Risk Theory for Actuaries. Chapman & Hall, London. [11] Embrechts, P., Kl¨ uppelberg, C. and Mikosch, T. (1997). Modelling Extremal Events for Insurance and Finance. Springer, New York. [12] Enders, W. (1995). Applied Econometric Time Series. Wiley, New York. [13] Extreme Values: Floods and Droughts. (1994). Proceedings of International Conference on Stochastic and Statistical Methods in Hydrology and Environmental Engineering, Vol. 1, 1993, K.W. Hipel (ed.), Kluwer, Dordrecht. [14] Extreme Value Theory. (1989). Proceedings of Oberwolfach Meeting, 1987, J. H¨ usler and R.–D. Reiss (eds.), Lect. Notes in Statistics 51, Springer, New York. [15] Extreme Value Theory and Applications. (1994). Proceedings of Gaithersburg Conference, 1993, J. Galambos et al. (eds.), Vol. 1: Kluwer, Dortrecht, Vol. 2: Journal Research NIST, Washington, Vol. 3: NIST Special Publication 866, Washington.

510

Bibliography

[16] Falk, M., H¨ usler, J. and Reiss, R.–D. (1994). Laws of Small Numbers: Extremes and Rare Events. DMV–Seminar Bd 23. Birkh¨ auser, Basel. [17] Falk, M., H¨ usler, J. and Reiss, R.–D. (2004). Laws of Small Numbers: Extremes and Rare Events. 2nd ed., Birkh¨ auser, Basel. [18] Fan, J. and Yao, Q. (2003). Nonlinear Time Series. Springer, New York. [19] Fang, K.–T., Kotz, S. and Ng, K.–W. (1990). Symmetric Multivariate and Related Distributions. Chapman and Hall, London. [20] Galambos, J. (1987). The Asymptotic Theory of Extreme Order Statistics. 2nd ed. Krieger: Malabar, Florida (1st ed., Wiley, New York, 1978). [21] Gentleman J.F. and Whitmore G.A. (1995). Case Studies in Data Analysis. Lect. Notes Statist. 94, Springer–Verlag, New York. [22] Gerber, H.–U. (1979). An Introduction to Mathematical Risk Theory. Huebner Foundation Monograph 8, Philadelphia. [23] Gray, H.L. and Schucany, W.R. (1972). The Generalized Jackknife Statistic. Marcel Dekker. [24] Gumbel, E.J. (1958). Statistics of Extremes. Columbia Univ. Press, New York. [25] Haan, L. de (1970). On Regular Variation and its Application to the Weak Convergence of Sample Extremes. Math. Centre Tracts 32, Amsterdam. [26] Hamilton, J.D. (1994). Time Series Analysis. Princeton University Press, Princeton. [27] Hampel, F.R., Ronchetti, E.M., Rousseeuw, P.J. and Stahel, A.W. (1986). Robust Statistics. Wiley, New York. [28] Hogg, R.V. and Klugman, S.A. (1984). Loss Distributions. Wiley, New York. [29] Hosking, J.R.M. and Wallis, J.R. (1997). Regional Frequency Analysis. Cambridge Univ. Press, Cambridge. [30] Huber, P.J. (1981). Robust Statistics. Wiley, New York. [31] Johnson, N.L. and Kotz, S. (1970). Distributions in Statistics: Continuous Univariate Distributions–1, –2. Houghton Miﬄin, Boston. [32] Johnson, N.L. and Kotz, S. (1972). Distributions in Statistics: Continuous Multivariate Distributions. Wiley, New York. [33] Jorion, P. (2001). Value at Risk: The New Benchmark for Controlling Market Risk. (ﬁrst edition 1997), McGraw–Hill, New York. [34] Kinnison, R.P. (1985). Applied Extreme Value Statistics. Battelle Press, Columbus. [35] Klugman, S.A. (1992). Bayesian Statistics in Actuarial Sciences. Kluwer, Dordrecht. [36] Klugman, S.A., Panjer, H.H. and Willmot, G.E. (1998). Loss Models, From Data to Decisions. Wiley, New York. [37] Kowaka, M., Tsuge, H., Akashi, M., Masamura, K. and Ishimoto, H. (1994). Introduction to Life Prediction of Industrial Plant Materials, Application of the Extreme Value Statistical Method for Corrosion Analysis. Allerton Press (Japanese version, 1984, Maruzen, Tokyo.)

511 [38] Kutoyants, Yu.A. (1998). Statistical Inference for Spatial Poisson Processes. Lect. Notes in Statistics 134, Springer, New York. [39] Leadbetter, M.R., Lindgren, G. and Rootz´en, H. (1983). Extremes and Related Properties of Random Sequences and Processes. Springer, New York. [40] Mandelbrot, B.B. (1997). Fractals and Scaling in Finance. Springer, New York. [41] McCullagh, P. and Nelder, J.A. (1989). Generalized Linear Models. Second Edition. Chapman and Hall, London. [42] Reiss, R.–D. (1989). Approximate Distributions of Order Statistics. Springer, New York. [43] Reiss, R.–D. (1993). A Course on Point Processes. Springer, New York. [44] Resnick, S.I. (1987). Extreme Values, Regular Variation, and Point Processes. Springer, New York. [45] Rosbjerg, D. (1993). Partial Duration Series in Water Resources. Institute of Hydrodynamics and Hydraulic Engineering. Technical University, Lyngby. [46] Samorodnitsky, G. and Taqqu, M.S. (1994). Stable Non–Gaussian Random Processes. Chapman & Hall, New York. [47] SCOR Notes: Catastrophe Risks. 1993, J. Lemaire (ed.) [48] Serﬂing, R.J. (1980). Approximation Theorems of Mathematical Statistics. Wiley, New York. [49] Shao, J. and Tu, D. (1995). The Jackknife and the Bootstrap. Springer, New York. [50] Simonoﬀ, J.S. (1996). Smoothing Methods in Statistics. Springer, New York. [51] Statistics for the Environment 2, Water Related Issues. (1997). Proceedings for the SPRUCE Conference, Rothamsted, 1993, V. Barnett and K.F. Turkman (eds.), Wiley, Chichester. [52] Statistics for the Environment 3, Pollution Assessment and Control. (1997). Proceedings for the SPRUCE Conference, Merida, 1995, V. Barnett and K.F. Turkman (eds.), Wiley, Chichester. [53] The Handbook of Risk Management and Analysis. (1996). C. Alexander (ed.) Wiley, Chichester. [54] Taylor, S. (1986). Modeling Financial Time Series. Wiley, Chichester. [55] Tukey, J.W. (1977). Exploratory Data Analysis. Addison–Wesley, Reading.