Spon's Mechanical and Electrical Services Price Book 2010 (Spon's Price Books), 41st Edition

Spon’s Mechanical and Electrical Services Price Book 2010

Spon’s Mechanical and Electrical Services Price Book Edited by DAVIS LANGDON LLP Engineering Services 2010 Forty-first edition

First edition 1968 Forty-first edition published 2010 by Spon Press 2 Park Square, Milton Park, Abingdon, Oxon, OX14 4RN Simultaneously published in the USA and Canada by Spon Press 270 Madison Avenue, New York, NY 10016 Spon Press is an imprint of the Taylor & Francis Group, an informa business © 2010 Spon Press The right of Davis Langdon LLP to be identified as the Author of this Work has been asserted by them in accordance with the Copyright, Designs and Patents Act 1988 Typeset in Arial by Spon Press Printed and bound in Great Britain by TJ International Ltd, Padstow, Cornwall All rights reserved. No part of this book may be reprinted or reproduced or utilised in any form or by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying and recording, or in any information storage or retrieval system, without permission in writing from the publishers. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept legal responsibility or liability for any errors or omissions that may be made. British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library ISBN 13: 978-0-415-55263-9 (hardback) ISBN 13: 978-0-203-87242-0 (ebook) ISBN 10: 0-415-55263-X (hardback) ISBN 10: 0-203-87242-8 (ebook) ISSN: 0305-4543

Contents page Preface Special Acknowledgements Acknowledgements

vii ix xi

PART ONE: ENGINEERING FEATURES Revisions to Part L of the Building Regulations Renewable Energy Options Grey Water Recycling and Rainwater Harvester Ground Water Cooling Fuel Cells Biomass Energy Getting the Connection Façade Systems Typical Engineering Details

3 7 11 15 21 27 33 37 43

PART TWO: APPROXIMATE ESTIMATING Directions Cost Indices RIBA Stage A Feasibility Costs RIBA Stage C Elemental Rates All-in-Rates Elemental Costs

69 70 73 78 85 101

PART THREE: MATERIAL COSTS/MEASURED WORK PRICES Mechanical Installations Directions

129

R : Disposal Systems R10 : Rainwater Pipework/Gutters R11 : Above Ground Drainage

135 155

S : Piped Supply Systems S10 : Cold Water S11 : Hot Water S32 : Natural Gas S41 : Fuel Oil Storage/Distribution S60 : Fire Hose Reels S61 : Dry Risers S63 : Sprinklers S65 : Fire Hydrants

180 235 239 243 244 245 246 252

T : Mechanical/Cooling/Heating Systems T10 : Gas/Oil Fired Boilers T13 : Packaged Steam Generators T31 : Low Temperature Hot Water Heating T33 : Steam Heating T42 : Local Heating Units T60 : Central Refrigeration Plant T61 : Chilled Water

254 267 268 349 352 353 361

vi

Contents page

T70 : Local Cooling Units U : Ventilation/Air Conditioning Systems U10 : General Ventilation U14 : Ductwork: Fire Rated U30 : Low Velocity Air Conditioning U31 : VAV Air Conditioning U41 : Fan Coil Air Conditioning U70 : Air Curtains

Electrical Installations

367

369 457 476 479 480 484

487

Directions

487

V : Electrical Supply/Power/Lighting Systems V10 : Electrical Generation Plant V11 : HV Supply V20 : LV Distribution V21 : General Lighting V22 : General LV Power V32 : Uninterruptible Power Supply V40 : Emergency Lighting

490 492 496 564 572 580 582

W : Communications/Security/Control W10 : Telecommunications W20 : Radio/Television W23 : Clocks W30 : Data Transmission W40 : Access Control W41 : Security Detection and Alarm W50 : Fire Detection and Alarm W51 : Earthing and Bonding W52 : Lightning Protection W60 : Central Control/Building Management

587 589 591 592 598 599 600 603 604 608

PART FOUR: RATES OF WAGES Mechanical Installations Rates of Wages

612

Electrical Installations Rates of Wages

619

PART FIVE: DAYWORK Heating and Ventilating Industry Electrical Industry Building Industry Plant Hire Costs

626 630 633

Tables and Memoranda

645

Index

669

Preface

The Forty-first Edition of SPON'S Mechanical and Electrical Services Price Book continues to cover the widest range and depth of services, reflecting the many alternative systems and products that are commonly used in the industry as well as current industry trends. The financial markets and economic events over the past year have taken their toll on the UK construction industry. In particular the credit crunch, the reversal in investor confidence and the increased risk aversion have all hit the sector. Parts of the UK construction industry have contracted sharply, from which recovery will take some time. There are some sectors however which will hold up over the next few years, particularly those which involve government investment programmes and also within the rail sector. Construction material price inflation continues to ease, but they are still outpacing inflation in the wider UK economy. The building cost index showed an annual increase in the fourth quarter 2008 of 7.3%, although it has fallen in the first quarter 2009. This is in sharp contrast to tender prices which have shown a fall of 8.5% from their peak in the second quarter 2008 to first quarter 2009. As workload reduces during 2009 the market will progressively harden and there is likely to be a steady drop in prices with more aggressive commercial adjustments being built into tenders. Analysis of M&E tenders show that whilst the cost of some items have increased, profits and overheads have fallen and could be expected to fall further in the coming 12 months. Before referring to prices or other information in the book, readers are advised to study the `Directions' which precede each section of the Materials Costs/Measured Work Prices. As before, no allowance has been made in any of the sections for Value Added Tax. The order of the book reflects the order of the estimating process, from broad outline costs through to detailed unit rate items. The approximate estimating section has been thoroughly reviewed to provide up to date key data in terms of square metre rates, all-in-rates for key elements and selected specialist activities and elemental analyses on a comprehensive range of building types. The prime purpose of the Materials Costs/Measured Work Prices part is to provide industry average prices for mechanical and electrical services, giving a reasonably accurate indication of their likely cost. Supplementary information is included which will enable readers to make adjustments to suit their own requirements. It cannot be emphasised too strongly that it is not intended that these prices should be used in the preparation of an actual tender without adjustment for the circumstances of the particular project in terms of productivity, locality, project size and current market conditions. Adjustments should be made to standard rates for time, location, local conditions, site constraints and any other factor likely to affect the costs of a specific scheme. Readers are referred to the build up of the gang rates, where allowances are included for supervision, labour related insurances, and where the percentage allowances for overhead, profit and preliminaries are defined. Readers are reminded of the service available on the Spon’s website detailing significant changes to the published information: www.pricebooks.co.uk/updates As with previous editions the Editors invite the views of readers, critical or otherwise, which might usefully be considered when preparing future editions of this work.

viii

Preface

Whilst every effort is made to ensure the accuracy of the information given in this publication, neither the Editors nor Publishers in any way accept liability for loss of any kind resulting from the use made by any person of such information. In conclusion, the Editors record their appreciation of the indispensable assistance received from the many individuals and organisations in compiling this book. DAVIS LANGDON LLP Engineering Services MidCity Place 71 High Holborn London WC1V 6QS Telephone: 0207 061 7000 Facsimile: 0207 061 7009

Special Acknowledgements

The Editors wish to record their appreciation of the special assistance given by the following organisations in the compilation of this edition.

Comunica plc The Hallmarks 146 Field End Road Eastcote Pinner Middlesex HA5 1RJ Tel: 020 8429 9696 Fax: 020 8429 4982 Email: [email protected] www.comunicaplc.co.uk

Hampden Park Industrial Estate Eastbourne East Sussex BN22 9AX Tel : 01323 501234 Fax : 01323 508752 E-Mail : [email protected] www.Hotchkiss.co.uk

ABBEY THERMAL INSULATION LTD. 23-24, Riverside House, Lower Southend Road, Wickford, Essex SS11 8BB Telephone: 01268 572116- Facsimile: 01268 572117 E-mail: [email protected]

The Counting House 1st Floor 53 Tooley Street London SE1 2QN Telephone: 020 7022 8400 Fax: 020 7022 8401 E-mail: [email protected]

Stanhope House 116-118 Walworth Road London SE17 1JY Telephone: e-mail: [email protected] www.tclarke.co.uk

TROX UK LTD Caxton Way Thetford Norfolk IP24 3SQ Grilles, Air Filters, FCU's, VAV's Tel: 01842 754545 Fax: 01842 763051 www.troxuk.co.uk

SPON’S PRICEBOOKS 2010 Spon's Architects' and Builders' Price Book 2010

Spon's Mechanical and Electrical Services Price Book 2010

Davis Langdon

Davis Langdon Mott Green Wall

The most detailed, professionally relevant source of UK construction price information currently available anywhere.

The only comprehensive and best annual services engineering price book available for the UK.

In the 2010 edition the overheads and profits have been revised sharply downwards in line with actual levels. Preliminaries have also been dropped, on a lower cost base. And labour rates have been adjusted to reflect today’s economic conditions. It provides about 150 new Measured Works items, including: additional ACO drainage systems and an overhauled Kalzip roofing section. Hb & electronic package*: 1000pp approx. 978-0-415-55256-1: £145 electronic package only 978-0-203-87245-1: £135

As well as an extensive overhaul of prices in line with a volatile market, updates to the 2010 edition include a new section on the Façade System in engineering features which explains the relationship between the building envelope and the provision of cooling. Hb & electronic package*: 640pp approx 978-0-415-55263-9: £145 electronic package only 978-0-203-87242-0: £135 (inc. sales tax where appropriate)

(inc. sales tax where appropriate)

Spon's Civil Engineering and Highway Works Price Book 2010 Spon's External Works and Landscape Price Book 2010 Davis Langdon The only comprehensive source of information for detailed external works and landscape costs. The 2010 edition gives a number of new Measured Works items: sustainable urban drainage systems (SUDS); sustainable pavings, and bases for sustainable pavings; step construction (in brick, insitu concrete, slab, timber and stone); pergolas; and planting transplants (preparations and planting). And the definitive listing of common landscape chemical applications has been revised to comply with recently introduced legislation. Hb & electronic package*: 424pp approx. 978-0-415-55260-8: £115 electronic package only 978-0-203-87243-7: £105 (inc. sales tax where appropriate)

Davis Langdon Materials prices are still rising for most products, subcontract prices are volatile, tender prices falling… The 24th edition, in its easy to read format, incorporates a general review throughout. Assumptions on overheads and profits have been revised downwards; preliminaries have been cut, on a lower cost base; and labour rates have been adjusted to reflect today’s economic climate. Hb & electronic package:* 800pp approx. 978-0-415-55258-5: £155 electronic package only 978-0-203-87244-4: £145 (inc. sales tax where appropriate)

* Receive our ebook free when you order any hard copy Spon 2010 Price Book, with free estimating software to help you produce tender documents, customise data, perform word searches and simple calculations. Or buy just the ebook, with free estimating software. Visit www.pricebooks.co.uk

To Order: Tel: +44 (0) 1235 400524 Fax: +44 (0) 1235 400525 or Post: Taylor and Francis Customer Services, Bookpoint Ltd, Unit T1, 200 Milton Park, Abingdon, Oxon, OX14 4TA UK Email: [email protected] For a complete listing of all our titles visit: www.tandf.co.uk

Acknowledgements

The editors wish to record their appreciation of the assistance given by many individuals and organisations in the compilation of this edition. Manufacturers, Distributors and Subcontractors who have contributed this year include: A C Plastics Industries Ltd Armstrong Road Daneshill East Basingstoke RG24 8NU GRP Water Storage Tanks Tel: 01256 329334 Fax: 01256 817862 www.acplastiques.com

Actionair Joseph Wilson Ind. Estate South Street Whitstable Kent CT5 3DU Dampers Tel: 01227 276100 Fax: 01227 264262 Email: [email protected] www.actionair.co.uk

Alfa Laval Limited Unit 1, 6 Wellheads Road Farburn Industrial Estate Dyce Aberdeen AB21 7HG Heat Exchangers Tel: 01224 424300 Fax: 01224 725213 www.alfalaval.com

Aquilar Limited Dial Post Court Horsham Road Rusper West Sussex RH12 4QX Leak Detection Tel: 08707 940310 Fax: 08707 940320 www.aquilar.co.uk

Axima Building Services 80 Paul Street London EC2A 4UD Above Ground Drainage Tel: 020 7729 7634 Fax: 020 7729 9756 www.axima-uk.com

Balmoral Tanks Balmoral Park Loirston Aberdeen AB12 3GY GRP Water Storage Tanks Tel: 01224 859000 Fax: 01224 859123 www.balmoral-group.com

Biddle Air Systems Ltd. St. Mary's Road, Nuneaton, Warwickshire CV11 5AU. Air Curtains Tel: 02476 384 233 Fax: 02476 373621 E-mail: [email protected]

Braithwaite Engineers Ltd Neptune Works Uskway Newport South Wales NP9 2UY Sectional Steel Water Storage Tanks Tel: 01633 262141 Fax: 01633 250631 www.braithwaite.co.uk

xii

Broadcrown Limited Alliance Works Airfield Industrial Estate Hixon Staffs ST18 0PF Generators Tel: 01889 272200 Fax: 01889 272220 www.broadcrown.co.uk

Caradon Stelrad Ideal Boilers PO Box 103 National Avenue Kingston-upon-Hall North Humberside HU5 4JN Boilers/Heating Products Tel: 08708 400030 Fax: 08708 400059 www.rycroft.com

Carrier Air Conditioning United Technologies House Guildford Road Leatherhead Surrey KT22 9UT Chilled Water Plant Tel: 0870 6001100 Fax: 01372 220221 www.carrier.uk.com

Chloride Power Protection Unit C, George Curl Way Southampton SO18 2RY Static UPS Systems Tel: 023 8061 0311 Fax: 023 8061 0852 www.chloridepower.com

Communica Chatteris Airfield Near March Cambridgeshire PE15 0EA Telephone Cables Tel: 01354 742340 www.communicaplc.co.uk

Acknowledgements

Cooper Lighting and Security London Project Office Suite 8, King Harold Court Sun Street Waltham Abbey Essex EN9 1ER Emergency Lighting and Luminaires Tel: 01302 303303 Fax: 01302 367155 www.cooper-ls.com

Danfoss Flowmetering Ltd Magflo House Ebley Road Stonehouse Glos GL10 2LU Energy Meters Tel: 01453 828891 Fax: 01453 853860 www.danfoss-randall.co.uk

Dewey Waters Limited Cox’s Green Wrington Bristol BS40 5QS Tanks Tel: 01934 862601 Fax: 01934 862604 www.deweywaters.co.uk

Dunham-Bush Limited 8 Downley Road Havant Hampshire PO9 2JD Convectors and Heaters Tel: 02392 477700 Fax: 02392 450396 www.dunham-bush.com

EMS Radio Fire & Security Systems Limited Technology House Sea Street Herne Bay Kent CT6 8JZ Security Tel: 01227 369570 Fax: 01227 369679 www.emsgroup.co.uk

Acknowledgements

Engineering Appliances Ltd Unit 11 Sunbury Cross Ind Est Brooklands Close Sunbury On Thames TW16 7DX Expansion Joints, Air and Dirt Separators Tel: 01932 788888 Fax: 01932 761263 E-mail: [email protected] www.engineeringappliances.com

Enviroplas Limited Unit 2 Shepard Cross Street Lancashire Bolton BL1 3DE Plastic Ductwork Tel: 01204 844744 Fax: 01204 841500 E-mail: [email protected]

FCS Ductwork Limited 3rd Floor Thomas Telford House 1 Heron Quay Canary Wharf London E14 5JD Fire Rated Ductwork Tel: 020 7987 7692 Fax: 020 7537 5627 www.fcsgroup.co.uk

FKI Hawker Siddeley Falcon Works P O Box 7713 Meadow Lane Loughborough Leicestershire LE11 1ZF HV Supply, Cables and HV Switchgear and Transformers Tel: 01495 331024 Fax: 01495 331019 www.fkiswitchgear.com

Flakt Woods Limited Axial Way Colchester CO4 5ZD Fans Tel: 01206 222555 Fax: 01206 222777

Hall Fire Protection Limited 186 Moorside Road Swinton Manchester M27 9HA Fire Protection Equipment Tel: 0161 793 4822 Fax: 0161 794 4950 www.hallfire.co.uk

Halton 5 Waterside Business Park Witham Essex CM8 3YQ Chilled Beams Tel: 01376 503040 Fax: 01376 503060 www.haltongroup.com

Hattersley, Newman, Hender Ltd Burscough Road Ormskirk Lancashire L39 2XG Valves Tel: 01695 577199 Fax: 01695 578775 e-mail: [email protected] www.hattersley.com

Hitec Power Protection Limited Unit B21a Holly Farm Business Park Honiley Kenilworth Warwickshire CV8 1NP Uninterruptible Power Supply (Rotary/Diesel) Tel: 01926 484535 Fax: 01926 484336 www.hitecups.co.uk

Honeywell CS Limited Honeywell House Anchor Boulevard Crossways Business Park Dartford Kent DA2 6QH Control Components Tel: 01322 484800 Fax: 01322 484898 www.honeywell.com

xiii

xiv

Hoval Limited Northgate Newark Notts NG24 1JN Boilers Tel: 01636 672711 Fax: 01636 673532 www.hoval.co.uk

HRS Hevac Ltd 10-12 Caxton Way Watford Business Park Watford Herts WD18 8JY Heat Exchangers Tel: 01923 232335 Fax: 01923 230266 www.hrshevac.co.uk

Hudevad Bridge House Bridge Street Walton on Thames Radiators Tel: 01932 247835 Fax: 01932 247694 www.hudevad.co.uk

Hydrotec (UK) Limited Hydrotec House 5 Mannor Courtyard Hughenden Avenue High Wycombe HP13 5RE Chemical Treatment Tel: 01494 796040 Fax: 01494 796049 www.hydrotec.com

IAC IEC House Moorside Road Winchester Hampshire SO23 7US Attenuators Tel: 01962 873000 Fax: 01962 873102 www.industrialacoustics.com

Acknowledgements

IC Service & Maintenance Ltd Unit K3 Temple Court Knights Place Knight Road Strood Kent ME2 2LT Fire Detection & Alarm Tel: 01634 290300 Fax: 01634 290700 www.icservice.biz

Ideal Boilers P O Box 103 National Avenue Kingston Upon Hull East Yorkshire HU5 4JN Boilers Tel: 01482 492251 Fax: 01482 448858 www.idealboilers.com

Kampmann Benson Environmental Limited 47 Central Avenue West Molesey Surrey KT8 2QZ Trench Heating Tel: (020) 8783 0033 Fax: (020) 8783 0140 www.diffusionenv.com

Kiddie Fire Protection Services Enterprise House Jasmine Grove London SE20 8JW Fire Protection Equipment Tel: 020 8659 7235 Fax: 020 8659 7237 www.kfp.co.uk

Metcraft Ltd Harwood Industrial Estate Littlehampton West Sussex BN17 7BB Oil Storage Tanks Tel: 01903 714226 Fax: 01903 723206 www.metcraft.co.uk

Acknowledgements

Osma Underfloor Heating 18 Apple Lane Sowton Trade City Exeter Devon EX2 5GL Underfloor Heating Tel: 01392 444122 Fax: 01392 444135 www.osmaufh.co.uk

Pullen Pumps Limited 158 Beddington Lane Croydon CR9 4PT Pumps, Booster Sets Tel: 020 8684 9521 Fax: 020 8689 8892 www.pullenpumps.co.uk

Reliance Hi-tech Boundary House Cricketfield Road Uxbridge Middlesex UB8 1QG Access Control and Security Detection and Alarm Tel: 01895 205000 Fax: 01895 205100 www.reliancesecurity.co.uk

Rycroft Duncombe Road Bradford BD8 9TB Storage Cylinders Tel: 01274 490911 Fax: 01274 498580 www.rycroft.com

Sanber Ltd 3 Newnham Street Astley Bridge Bolton BL1 8QA Plastic Ductwork Tel: 01204 596 015 Fax: 01204 598 751 E-mail: [email protected] www.sanberlabservices.co.uk

Schneider Electric Limited 120 New Cavendish Street London W1W 6XX Tel: 0870 608 8608 www.schneider-electric.com

SF Limited Pottington Business Park Barnstaple Devon EX31 1LZ Flues Tel: 01271 326633 Fax: 01271 334303

Simmtronic Limited Waterside Charlton Mead Lane Hoddesdon Hertfordshire EN11 0QR Lighting Controls Tel: 01992 456869 Fax: 01992 445132 www.simmtronic.com

Socomec Limited Knowl Piece Wilbury Way Hitchin Hertfordshire SG4 0TY Automatic Transfer Switches Tel: 01462 440033 Fax: 01462 431143 www.socomec.com

Spirax-Sarco Ltd Charlton House Cheltenham Gloucestershire GL53 8ER Traps and Valves Tel: 01242 521361 Fax: 01242 573342 www.spiraxsarco.com

xv

xvi

Tyco Limited Unit 6 West Point Enterprize Park Clarence Avenue Trafford Park Manchester M17 1QS Fire Protection Tel: 0161 875 0400 Fax: 0161 875 0491 www.tyco.com

Utile Engineering Company Ltd Irthlingborough Northants NN9 5UG Gas Boosters Tel: 01933 650216 Fax: 01933 652738 www.utileengineering.com

Acknowledgements

Woods of Colchester Tufnell Way Colchester Essex CO4 5AR Air Distribution, Fans, Anti-vibration mountings Tel: 01206 544122 Fax: 01206 574434

thinking

www.davislangdon.com

E S S E N T I A L R E A D I N G F R O M TAY L O R A N D F R A N C I S

Spon's Irish Construction Price Book Third Edition Franklin + Andrews

This new edition of Spon's Irish Construction Price Book, edited by Franklin + Andrews, is the only complete and up-to-date source of cost data for this important market. • All the materials costs, labour rates, labour constants and cost per square metre are based on current conditions in Ireland • Structured according to the new Agreed Rules of Measurement (second edition) • 30 pages of Approximate Estimating Rates for quick pricing This price book is an essential aid to profitable contracting for all those operating in Ireland's booming construction industry. Franklin + Andrews, Construction Economists, have offices in 100 countries and in-depth experience and expertise in all sectors of the construction industry.

April 2008: 246x174 mm: 510 pages Hb: 978-0-415-45637-1: £145.00 To Order: Tel: +44 (0) 1235 400524 Fax: +44 (0) 1235 400525 or Post: Taylor and Francis Customer Services, Bookpoint Ltd, Unit T1, 200 Milton Park, Abingdon, Oxon, OX14 4TA UK Email: [email protected]

For a complete listing of all our titles visit: www.tandf.co.uk

big

‘Thinking Big’ Global construction consultants Cost Management | Project Management | Program Management | Banking Tax & Finance | Building Surveying | Design Project Management | Engineering 6HUYLFHV_+HDOWK 6DIHW\6HUYLFHV_/HJDO6XSSRUW_0DQDJHPHQW&RQVXOWLQJ_0L[HGXVH0DVWHUSODQQLQJ_6SHFLéFDWLRQ&RQVXOWLQJ_9DOXH3ODQQLQJ 5LVN

www.davislangdon.com

SPON’S PRICEBOOKS 2010 Spon's Architects' and Builders' Price Book 2010

Spon's Mechanical and Electrical Services Price Book 2010

Davis Langdon

Davis Langdon Mott Green Wall

The most detailed, professionally relevant source of UK construction price information currently available anywhere.

The only comprehensive and best annual services engineering price book available for the UK.

In the 2010 edition the overheads and profits have been revised sharply downwards in line with actual levels. Preliminaries have also been dropped, on a lower cost base. And labour rates have been adjusted to reflect today’s economic conditions. It provides about 150 new Measured Works items, including: additional ACO drainage systems and an overhauled Kalzip roofing section. Hb & electronic package*: 1000pp approx. 978-0-415-55256-1: £145 electronic package only 978-0-203-87245-1: £135

As well as an extensive overhaul of prices in line with a volatile market, updates to the 2010 edition include a new section on the Façade System in engineering features which explains the relationship between the building envelope and the provision of cooling. Hb & electronic package*: 640pp approx 978-0-415-55263-9: £145 electronic package only 978-0-203-87242-0: £135 (inc. sales tax where appropriate)

(inc. sales tax where appropriate)

Spon's Civil Engineering and Highway Works Price Book 2010 Spon's External Works and Landscape Price Book 2010 Davis Langdon The only comprehensive source of information for detailed external works and landscape costs. The 2010 edition gives a number of new Measured Works items: sustainable urban drainage systems (SUDS); sustainable pavings, and bases for sustainable pavings; step construction (in brick, insitu concrete, slab, timber and stone); pergolas; and planting transplants (preparations and planting). And the definitive listing of common landscape chemical applications has been revised to comply with recently introduced legislation. Hb & electronic package*: 424pp approx. 978-0-415-55260-8: £115 electronic package only 978-0-203-87243-7: £105 (inc. sales tax where appropriate)

Davis Langdon Materials prices are still rising for most products, subcontract prices are volatile, tender prices falling… The 24th edition, in its easy to read format, incorporates a general review throughout. Assumptions on overheads and profits have been revised downwards; preliminaries have been cut, on a lower cost base; and labour rates have been adjusted to reflect today’s economic climate. Hb & electronic package:* 800pp approx. 978-0-415-55258-5: £155 electronic package only 978-0-203-87244-4: £145 (inc. sales tax where appropriate)

* Receive our ebook free when you order any hard copy Spon 2010 Price Book, with free estimating software to help you produce tender documents, customise data, perform word searches and simple calculations. Or buy just the ebook, with free estimating software. Visit www.pricebooks.co.uk

To Order: Tel: +44 (0) 1235 400524 Fax: +44 (0) 1235 400525 or Post: Taylor and Francis Customer Services, Bookpoint Ltd, Unit T1, 200 Milton Park, Abingdon, Oxon, OX14 4TA UK Email: [email protected] For a complete listing of all our titles visit: www.tandf.co.uk

PART ONE

Engineering Features

This section on Engineering Features, deals with current issues and/or technical advancements within the industry. These shall be complimented by cost models and/or itemised prices for items that form part of such. The intention is that the book shall develop to provide more than just a schedule of prices to assist the user in the preparation and evaluation of costs.         

Revisions to Part L of the Building Regulations Renewable Energy Options Grey Water Recycling and Rainwater Harvesting Ground Water Cooling Fuel Cells Biomass Energy Getting the Connection Façade Systems Typical Engineering Details

Get more from your Spon Price Libraries

Everything you need to price work quickly and accurately using your own rates together with your Spon Price libraries.

9 9 9 9 9 9 9 9 9 9 9 9

Resource Library - Keep all your costs up-to-date and in one place Organiser – To Do Lists. Link Contacts to jobs and resources Price Lists - Access to the latest product prices from your key suppliers Integrated Spon Price Libraries – Access to a range of industry standard Price libraries Custom Rate Library - Maintain your own item library (with full build ups) Composite Items - Save time by selecting a single item covering multiple tasks BoQ Preparation - Deliver professional documents to clients and colleagues Project Comparison – Compare similar jobs by cost; profit; type. Area rate comparisons Live Data views – Watch the effect of your changes in tables or easy to view charts Import From MS Excel® – Fast, accurate data import from an industry standard format Output to Microsoft® Applications - Excel®, Project® Fully Customisable – Each user can have their own screen layouts (saved)

Fast Estimate shares the same clear pricing processes as Spon Estimating, but with more pricing tools to give you outstanding control over your tender documents.

Download your FREE trial copy:

www.estek.co.uk Or call 01764 655331

Revisions to Part L of the Building Regulations

The following review of the effects of the revised 2006 Part L on non-residential buildings is based on updated material originally published in a Building Cost Model on Part L, issued in Building Magazine on 5 August 2005. The original article was produced in collaboration with Consultants, Arup. A further review of the 2006 document is currently underway and is due to come into effect in April 2010. Part L of the Building Regulations is one of main areas where the Government can implement its policy of reducing energy usage in buildings as part of its strategy on climate change, so the requirements will be more stretching with each revision, particularly as there has been a substantial increase in energy prices since the changes in 2006. The Green Building Council is currently advising the Government along with others, that new non domestic buildings should have improvements in energy usage of 25% in 2010 and 44% in 2016, relative to 2006 standards. The Government has voiced the ambition that all new non domestic buildings should be zero carbon by 2019, i.e. that on site generated and exported energy offsets the CO2 generated from the imported energy to the site, although only in the right circumstances. Whether this is achievable remains to be seen, as it largely relies on the wide scale adoption of renewable technologies. In terms of new dwellings the intention voiced to date is to amend the Building Regulations to achieve an improvement in energy efficiency of 25% in the 2006 version, 44% in 2013 and zero carbon in 2016. Again, whether this is achievable remains to be seen. Experience from the amendments made in 2006 has shown that achieving compliance with buildings that are air conditioned was significantly easier than for naturally ventilated buildings, since the contribution of the air conditioning to the energy consumption of the building was significant and could be improved upon, which is not the case with natural ventilation where the scope for improvement in the energy consumption figures is not so great. It is intended that this anomaly will be addressed in the 2010 amendment, with consideration being given to the setting of different emissions for different building types to reflect the fact that low energy buildings will be more difficult to achieve the reductions than high energy buildings. Introduction Part L (2006) came into force in April 2006 at a time when awareness of the threat posed by global warming has never been higher. The 2002 revisions signalled an important shift in emphasis from energy conservation to control of emissions of carbon and other greenhouse gases. Revised Part L 2006 is building on this foundation, reducing carbon emissions from new build further, and widening the scope of work required to improve performance in existing buildings. In raising standards, the approach adopted has been to give maximum flexibility to owners and designers in selecting means of compliance. Changes in the Approach in Part L2 Part L2 deals with non-dwellings. The major headline change is the requirement to achieve savings in carbon emissions compared to the previous 2002 standard. For new build, air-conditioned and mechanically ventilated buildings, the reduction is 28%, whereas for naturally ventilated buildings the reduction is 23.5%.

4

Revisions to Part L of the Building Regulations

In addition to the introduction of these challenging targets for carbon emissions reduction, the Revised Part L also involves some significant changes to practice that are having an impact on the work of consultants and contractors. 

  

The introduction of alternative assessment methodologies for new build and existing buildings. The new build method, based on a national standard assessment methodology, is concerned with comparing the carbon emissions of the proposed development with those of a notional building, which complies with the previous 2002 Regulations. The approach for existing buildings is broadly intended to encourage proportional, technically feasible and economic improvements to building performance to ensure that alterations and improvements made to an existing building contribute to a reduction in carbon emissions. A move away from prescriptive technical guidance. Users are required to refer to technical details taken from a wide range of sources to identify how to meet the new standards. The new Part L only sets out the required benchmarks. The adoption of a single national calculation methodology. This change, driven by the EPBD, has led to the adoption of a carbon emissions method for buildings other than dwellings. As a result, the simple elemental method of calculation used under previous versions of the regulations is no longer available. The Regulations include a provision to include the contribution of low or zero carbon (LZC) technologies, such as solar hot water heating, in the assessment. They also provide flexibility with regard to their application whilst the technologies mature and become more widely available.

The National Calculation Methodology The new calculation methodology required under involves inputting all aspects of the building design into an assessment tool based on an agreed methodology. The National Calculation Tool, known as iSBEM (Simple Building Evaluation Method), developed by the BRE, is currently the most common application. Others such as CECM are becoming available. The comparative emissions calculation needs to be done fairly early on in the design process and then updated once the design is fixed. This will potentially make it more difficult for the design team to handle changes, and, given the resource requirements of recalculation, this could limit design iteration, although criteria such as perimeter heat gain can be set that will allow some design iterations without recalculation. Furthermore, contractors may be less likely to propose alternative design solutions as a result of the introduction of the new methodology, if they are subsequently required to demonstrate and achieve compliance. Impact of the Regulations on Design The revised Part L is beginning to affect all aspects of the building design. The transition period was very short, and in effect, all buildings currently being designed will have to meet the new Standard. In addition to insulation levels, proportion and type of glazing, other factors that may be improved are:      

Shading to combat perimeter heat gains, e.g. external shading, double wall facades Boiler efficiencies and chiller coefficients of performance Building envelope air tightness Lighting efficiency, lighting control Fan and pump efficiencies, air and water pressure drops Energy recovery

A key characteristic of the revisions is, although the carbon emissions target has been cut by some 28% for cooled or mechanically ventilated buildings, none of the minimum acceptable standards to which the design must comply have been changed significantly from those set in 2002. It will continue to be possible to specify, for example, highly glazed buildings, albeit that significant improvement in other aspects of building performance will be necessary. Lighting specification and lamp efficiency are examples of areas where substantial reductions in both energy consumption and cooling loads could be made at a relatively low cost.

Revisions to Part L of the Building Regulations

5

Indicative Cost Implications Davis Langdon prepared a comparison of comparative office model solutions in Summer 2005 with Consulting Engineers, Arup, in order to show how the 2006 Regulations could be met by using either 40% glazing or different combinations of 100% glazing and solar shading. The cost implications are that using a low proportion of glazing, improvements to the glass specification, services plant efficiency and the introduction of simple heat recovery measures will actually result in a small reduction in capital costs resulting from the reduction in heating and cooling loads and plant sizing. Saving/Extra £/m2

Option

Envelope solution

40% glazing 100% glazing 100% glazing

High performance glass (11.82) High performance glass, fixed external louvres 61.29 Clear double glazing with low-e coating, external 96.78 motorised slatted blinds Double wall facade with externally ventilated cavity, 73.12 with motorised slatted blinds at close centres

100% glazing

Saving/Extra % (0.62) 3.19 5.06 3.82

The costs in the comparison are at 3rd Quarter 2005 prices based on a central London location. The base building costs include the category A fit-out, preliminaries and contingencies. Costs of demolitions, external works, tenant fit-out, professional fees and VAT are excluded. Due to the complexity of the changes and the recent introduction of the Regulations, it has not been possible to assess their impact on the rates within the ‘Cost Models’ and the ‘Approximate Estimating’ sections of the SPON’S Mechanical and Electrical Price Book 2007. These sections have not been adjusted to take into account the implications of works required to comply with the revised Part L Regulations. Users should note that the items and their rates in the ‘Prices for Measured Works’ section are compliant.

E S S E N T I A L R E A D I N G F R O M TAY L O R A N D F R A N C I S

Acoustic Absorbers and Diffusers Theory, Design and Application 2nd edition Trevor Cox and Peter D'Antonio

This book describes how to effectively measure, model, design and apply diffusers and absorbers. New developments in measurement, materials, theory and practice since the first edition (published in 2004) are included. The sections on absorbers are extended to include more about noise control. Contents Introduction 1. Applications and Basic Principles of Absorbers 2. Applications and Basic Principles of Diffusers 3. Measurement of Absorber Properties 4. Measurement and Characterization of Diffuse Reflections or Scattering 5. Porous Absorption 6. Resonant Absorbers 7. Some Other Absorbers 8. Prediction of Scattering 9. Schroeder Diffusers 10. Geometric Reflectors and Diffusers 11. Hybrid Surfaces 12. Absorbers and Diffusers in Rooms and Geometric Models 13. Active Absorbers and Diffusers Appendix A: Table of Absorption Coefficients Appendix B: MATLAB Scripts Appendix C: Diffusion and Scattering Coefficients

January 2009 246 x 174mm: 478pp Hb: 978-0-415-47174-9 £90.00 To Order: Tel: +44 (0) 1235 400524 Fax: +44 (0) 1235 400525 or Post: Taylor and Francis Customer Services, Bookpoint Ltd, Unit T1, 200 Milton Park, Abingdon, Oxon, OX14 4TA UK Email: [email protected]

For a complete listing of all our titles visit: www.tandf.co.uk

Renewable Energy Options

This article focuses on building-integrated options rather than large-scale utility solutions such as wind farms, which are addressed separately, and provides an analysis of where they may be best installed. The Legislative Background, Imperatives and Incentives In recognition of likely causes and effects of global climate change, the Kyoto protocol was signed by the UK and other nations in 1992, with a commitment to reduce the emission of greenhouse gases relative to 1990 as the base year. The first phase of European Union Emission Trading Scheme (EU ETS) covers the power sector and high-energy users such as oil refineries, metal processing, mineral and paper pulp industries. From 1 January 2005, all such companies in all 25 EU member states must limit their CO2 emissions to allocated levels in line with Kyoto. The EU ETS principle is that participating organisations can:   

Meet the targets by reducing their own emissions, or Exceed the targets and sell or bank their excess emission allowances, or Fail to meet the targets and buy emission allowances from other participants.

These targets can only be met by either energy efficiency measures or making using more renewable energy instead of that derived from fossil fuels. In the UK, the Utilities Act (2000) requires power suppliers to provide some electricity from renewables, starting at 3% in 2003 and rising to15% by 2015. In a similar way to EU ETS, generating companies receive and can trade Renewables Obligation Certificates (ROCs) for the qualifying electricity that they generate. For small renewable generators, Renewable Energy Guarantee of Origin Certificates (REGOs) has been introduced, in units of 1 kWh. The initial focus is on Carbon Dioxide (CO2), and the goals set by the UK government are:   

20% emission reduction by 2010 (and 10% of UK electricity from renewable sources) 60% emission reduction by 2050 Real progress towards the 60% by 2020 (and 20% of UK electricity from renewable sources)

Four years after the introduction of ROCS, it was estimated that less than 3% of UK electricity was being generated from renewable sources. A ‘step change’ in policy was required, and the Office of the Deputy Prime Minister (ODPM) published ‘Planning Policy Statement 22 (PPS 22): Renewable Energy’ in order to promote renewable energy through the UK’s regional and local planning authorities. Local Planning & Building Regulations More than 100 local authorities have already embraced PPS 22 and its Companion Guide published in December 2004, by adopting pro-renewables planning policies. Others are expected to follow; the typical requirement is for 10% of a site’s electricity or heat to be derived from renewable sources, but at least one authority has already ‘raised the bar’ to 15%. The London Plan states that ‘The Mayor will and boroughs should require major developments to show how the development would generate a proportion of the site’s electricity or heat from renewables’.

8

Renewable Energy Options

Energy Performance Certificates (EPC) The EU Directive on the Energy Performance of Buildings (EPBD) requires that Energy Performance Certificates must be prominently placed on all buildings open to the public and commercial buildings built, sold or let from January 2006, thus enabling prospective purchasers and tenants to be more aware of a building’s energy performance. Assessing the carbon emissions associated with the operation of buildings is now an important part of the overall early design process for planning approval. Methods are set out in:   

Part L of the UK Building Regulations: (Conservation of fuel & power) BREEAM – (Building Research Establishment Environmental Assessment Method) Standard Assessment Procedure (SAP) for Energy Rating

On-site renewable energy sources are taken into account, but developers are not allowed to rely on any ‘green tariff’ as part of an assessment. Technology Options and Applications 

Wind Generators – In a suitable location, wind energy can be an effective source of renewable power generation. Even without grant aid, an installed cost range of £2500 to £5000 per kW of generator capacity has been established over the past few years. The most common arrangement is a machine with three blades on a horizontal axis; all mounted on a tower or, increasingly for small generators in inner city areas, on top of a building. Average site wind speeds of 4 m/s can produce useful amounts of energy from a small generator up to say 3 kW, but larger generators require at least 7 m/s. A small increase in average site wind speed will produce a large increase in the output power. There is a need for inverters, synchronising equipment and metering for a grid connection. Third party provision through an Energy Service Company (ESCo) can be successful for larger installations co-located with or close to the host building, especially in industrial settings where there may be less aesthetic or noise issues than inner city office or residential. The ESCo provides funding, installs and operates the plant and the client signs up for the renewable electrical energy at a fixed price for a period of time.



Building Integrated Photovoltaics (BIPV) – Photovoltaic materials, commonly known as solar cells, generate direct current electrical power when exposed to light. Solar cells are constructed from semi-conducting materials that absorb solar radiation; electrons are displaced within the material, thus starting a flow of current through an external connected circuit. Conversion efficiency of solar energy to electrical power is improving with advances in technology and ranges from 7% to 18% under laboratory conditions. In practice, however, allowing for typical UK weather conditions, an installation of at least 7m2 of the latest high-efficiency hybrid modules is needed to produce 1000 watts peak (1 kWp), yielding perhaps 800 kWh in a year. Installed costs range from £300 to £450/m2 for roof covering, and from £850 to £1300/m2 for laminated glass.



Ground Source Heat Pumps – The ground temperature remains substantially constant throughout the year and heat can be extracted by circulating a fluid (normally water) through a system of pipes and into a heat exchanger. An electrically driven heat pump is then used to raise the fluid temperature via the compression cycle, and hot water is delivered to the building load as if from a normal boiler (albeit at a somewhat lower temperature than a normal boiler). Most ground heat systems consist of a cluster of pipes inserted into vertical holes typically 50 to100 metres deep depending on space and ground type. Costs for the drilling operation vary according to location, site access and ground conditions. A geological investigation may be needed minimise the risk of failure and to improve cost certainty. Such systems can achieve a Coefficient of Performance (COP = heat output /electrical energy input) of between 3 and 4, achieving good savings of energy compared with conventional fossil fuels. Installed costs are in the range £800 to £1200/kW depending on system size and complexity.

Renewable Energy Options



9

Borehole Cooling – The constant ground temperature is well below ambient air temperature during the summer, so ‘coolth’ can be extracted and used to replace or, more likely commercially, to supplement conventional building cooling systems. Such borehole systems may be either ‘open’ – discharging ground water to river or sewer after passing it through a heat exchanger, or ‘closed’ – circulating a fluid (often water) through a heat exchanger and vertical pipes extending below the water table. Ground source heating and cooling systems are only ‘partial renewable energy’ because they rely on electrical power, mainly for pumping. Considerable carbon savings can be justifiably claimed, however, by avoiding the use of fossil fuel for heating and electrical power to drive conventional chillers. Indicative system costs are from £200 to £250/kW.



Solar Water Heating – Simple flat-plate water-based collector panels have been used successfully on South-facing roofs over many years in the UK – especially by DIY enthusiasts prepared to devise their own simple control systems. The basic principle is to collect heat from the sun and circulate it to pre-heat space heating or domestic hot water, in either a separate tank or a twin coil hot water cylinder. Purpose-designed, evacuated tube collectors have been developed to increase performance and a typical 4 m2 installed residential system has a cost range from £2500 to £4000 depending on pipe runs and complexity. Such a system could produce approximately 2000 kWh saving in energy use per year. Commercial systems are simply larger and slightly more complex but should achieve similar performance; low-density residential, retail and leisure developments with washrooms and showers may be suitable applications having adequate demand for hot water.



Biomass Boilers – Wood chips or pellets derived from waste or farmed coppices or forests are available commercially and are considered carbon neutral, having absorbed carbon dioxide during growth. With a suitable fuel storage hopper and automatic screw drive and controls, biomass boilers can replace conventional boilers with little technical or aesthetic impact. They do, however, depend on a viable source of fuel, and there is a requirement for ash removal/disposal as well as periodic de-coking. In individual dwellings, space may be a problem because a biomass boiler does not integrate readily into a typical modern kitchen. Biomass boilers are available in a wide range of domestic and commercial sizes. For a large installation, they are more likely to form part of a modular system rather than to displace conventional boilers entirely. There is a cost premium for the biomass storage and feed system, and the cost of the fuel is currently comparable with other solid fuels. As an addition to a conventional system, installed costs could range from £200 to £250/kW.



Biomass Combined Heat & Power (CHP) – Conventional CHP installations consist of either an internal combustion engine or a gas turbine driving an alternator, with maximum recovery of heat, particularly from the exhaust system. For best efficiency, there needs to be a convenient and constant requirement for the output heat energy, and the generated electricity should also be utilised locally, with any excess exported to the grid. Unless a source of fuel is available from landfill gas, or from a local biomass digester, then an on-site biomass to gas conversion plant would be needed to fuel the CHP engine. Considering the cost implications for biomass storage and handling as described for boilers, it appears that biomass CHP will only be viable in specific circumstances, with installed system costs in the order of £2500 to £3000/kW (electrical).

10

Renewable Energy Options

Investment ‘yield’ table for various renewable technologies It can be quite difficult to compare renewable options in terms of how much energy they might save on a particular project, and how that translates into CO2, especially if more than one option appears to be feasible. The table illustrates the potential saving per £100,000 of renewable investment i.e. £100,000 is the notional ‘extra over’ cost of introducing a proportion of renewable energy into the particular building service. Grant aid has been ignored in the table. The photovoltaic options indicated include no allowance for the displacement of conventional building fabric. In practice, the ‘yield per £100,000’ may be higher, e.g. if PV is fully-integrated. Renewable technology

Candidate Prerequisites Potential barriers buildings

Annual saving per £100,000 of capital cost kWh Kg CO2

Tower-mounted wind A generators Building-mounted B ‘micro wind’ *Photovoltaic roof or panels B

F

H

Environmental impact. Site 100,000 space for large turbines Environmental impact. Roof 40,000 space for small turbines. Available roof space 12,500

*Photovoltaic rain screen or glass

C

H

None

9,000

3,870 c.f. elec.

Passive solar water heating D

J

None

50,000

9,500 c.f. gas

Ground source heat pump

B

K

Site space for pipes

40,000

7,600 c.f. gas

Borehole cooling

D

K

Site space for pipes

12,000

5,160 c.f. elec.

Biomass boilers

B

L

Biomass CHP

E

M

Environmental impact, & maintenance Environmental impact, & maintenance

G

100,000

43,000 c.f. elec. 17,200 c.f. elec. 5,375 c.f. elec.

19,000 c.f. gas

28,000 12,000 c.f. elec. + 63,000 + 12,000 c.f. gas

Key: A B C D E F

Industrial, distribution centres Most types of building Prestige offices or retail Residential and commercial, hotels & leisure Industrial, Hotel, leisure, hospital Average site wind speed minimum 7 m/s

G H J K L M

Average site wind speed minimum 3.5 m/s Roughly south-facing, un-shaded Roughly south-facing, un-shaded – for hot water Feasible ground conditions Space and convenient source of fuel Space & convenient source of fuel – for summer heat

The following exclusions relate to all of the aforementioned indicative costs: Inflation beyond second quarter 2005, maintenance charges, general builders work, main contractor’s overheads, profit and attendance, main contract preliminaries, professional and prescribed fees, contingency and design reserve, grant aid, tax allowances, Value Added Tax. Price levels indicated are based on provincial locations.

Grey Water Recycling and Rainwater Harvesting

The potential for grey water recycling and rainwater harvesting for both domestic residential and for various types of commercial building, considering the circumstances in which the systems offer benefits, both as stand-alone installations and combined. Water Usage Trends Water usage in the UK has increased dramatically over last century or so and it is still accelerating. The current average per capita usage is estimated to be at least 150 litres per day, and the population is predicted to rise from 60 million now to 65 million by 2017 and to 75 million by 2031, with an attendant increase in loading on water supply and drainage infrastructures. Even at the current levels of consumption, it is clear from recent experience that long, dry summers can expose the drier regions of the UK to water shortages and restrictions. The predicted effects of climate change include reduced summer rainfall, more extreme weather patterns, and an increase in the frequency of exceptionally warm dry summers. This is likely to result in a corresponding increase in demand to satisfy more irrigation of gardens, parks, additional usage of sports facilities and other open spaces, together with additional needs for agriculture. The net effect, therefore, at least in the drier regions of the UK, is for increased demand coincident with a reduction in water resource, thereby increasing the risk of shortages. Water Applications and Re-use Opportunities Average domestic water utilisation can be summarised as follows, as a percentage of total usage (Source: Three Valleys Water)        

Wash hand basin 8% Toilet 35% Dishwasher 4% Washing machine 12% Shower 5% Kitchen sink 15% Bath 15% External use 6%

Water for drinking and cooking makes up less than 20% of the total, and more than a third of the total is used for toilet flushing. The demand for garden watering, although still relatively small, is increasing year by year and coincides with summer shortages, thereby exacerbating the problem. In many types of building it is feasible to collect rainwater from the roof area and to store it, after suitable filtration, in order to meet the demand for toilet flushing, cleaning, washing machines and outdoor use – thereby saving in many cases a third of the water demand. The other, often complementary recycling approach, is to collect and disinfect ‘grey water’ – the waste water from baths, showers and washbasins. Hotels, leisure centres, care homes and apartment blocks generate large volumes of waste water and therefore present a greater opportunity for recycling. With intelligent design, even offices can make worthwhile water savings by recycling grey water, not necessarily to flush all of the toilets in the building but perhaps just those in one or two primary cores, with the grey water plant and distribution pipework dimensioned accordingly.

12

Grey Water Recycling and Rainwater Harvesting

Intuitively, rainwater harvesting and grey water recycling seem like ‘the right things to do’ and rainwater harvesting is already common practice in many counties in Northern continental Europe. In Germany, for example, some 60,000 to 80,000 systems are being installed every year – compared with perhaps 2,000 systems in the UK. Grey water recycling systems, which are less widespread than rainwater harvesting, have been developed over the last 20 years and the ‘state of the art’ is to use biological and UV (ultra-violet) disinfection rather than chemicals, and to reduce the associated energy use through advanced technology membrane micro filters. In assessing the environmental credentials of new developments, the sustainable benefits are recognised by the Building Research Establishment Environmental Assessment Method (BREEAM) whereby additional points can be gained for efficient systems – those designed to achieve enough water savings to satisfy at least 50% of the relevant demand. Furthermore, rainwater harvesting systems from several manufacturers are included in the ‘Energy Technology Product List’ and thereby qualify for Enhanced Capital Allowances (ECAs). Claims are allowed not only for the equipment, but also to directly associated project costs including:   

Transportation – the cost of getting equipment to the site Installation – cranage (to lift heavy equipment into place), project management costs and labour, plus any necessary modifications to the site or existing equipment Professional Fees – if they are directly related to the acquisition and installation of the equipment

Rainwater Harvesting A typical domestic rainwater harvesting system can be installed at reasonable cost if properly designed and installed at the same time as building the house. The collection tank can either be buried or installed in a basement area. Rainwater enters the drainage system through sealed gullies and passes through a pre-filter to remove leaves and other debris before passing into the collection tank. A submersible pump, under the control of the monitoring and sensing panel, delivers recycled rainwater on demand. The non-potable distribution pipework to the washing machine, cleaner’s tap, outside tap and toilets etc could be either a boosted system or configured for a header tank in the loft, with mains supply back-up, monitors and sensors located there instead of at the control panel. Calculating the collection tank size brings into play the concept of system efficiency – relating the water volume saved to the annual demand. In favourable conditions – ample rainfall and large roof collection area – it would be possible in theory to achieve almost 100%. In practice, systems commonly achieve 50 to 70% efficiency, with enough storage to meet demand for typically one week, though this is subject to several variables. As well as reducing the demand for drinking quality mains supply water, rainwater harvesting tanks act as an effective storm water attenuator, thereby reducing the drainage burden and the risk of local flooding which is a benefit to the wider community. Many urban buildings are located where conditions are unfavourable for rainwater harvesting – low rainfall and small roof collection area. In these circumstances it may still be worth considering water savings through grey water recycling. Grey Water Recycling In a grey water recycling system, waste water from baths, showers and washbasins is collected by conventional fittings and pipework, to enter a pre-treatment sedimentation tank which removes the larger dirt particles. This is followed by the aerobic treatment tank in which cleaning bacteria ensure that all bio-degradable substances are broken down. The water then passes onto a third tank, where an ultra-filtration membrane removes all particles larger than 0.00005 mm, (this includes viruses and bacteria) effectively disinfecting the recycled grey water. The clean water is then stored in the fourth tank from where it is pumped on demand under the control of monitors and sensors in the control panel. Recycled grey water may then be used for toilet and urinal flushing, for laundry and general cleaning, and for outdoor use such as vehicle washing and garden irrigation – a substantial water saving for premises such as hotels. If the tank becomes depleted, the distribution is switched automatically to the mains water back-up supply. If there is insufficient plant room space, then the tanks may be buried but with adequate arrangements for maintenance access. Overflow soakaways are recommended where feasible but are not an inherent part of the rainwater harvesting and grey water recycling systems.

Grey Water Recycling and Rainwater Harvesting

13

Combined Rainwater/Grey Water Systems Rainwater can be integrated into a grey water scheme with very little added complication other than increased tank size. In situations where adequate rainwater can be readily collected and diverted to pre-treatment, then heavy demands such as garden irrigation can be met more easily than with grey water alone. An additional benefit is that they reduce the risk of flooding by keeping collected storm water on site instead of passing it immediately into the drains. Indicative System Cost and Payback Considerations Rainwater Harvesting Scenario: Office building in Leeds having a roof area of 2000 m² and accommodating 435 people over 3 floors. Local annual rainfall is 875 mm and the application is for toilet and urinal flushing. An underground collection tank of 25,000 litres has been specified to give 4.5 storage days. Rainwater harvesting cost breakdown System tanks and filters and controls Mains water back-up and distribution pump arrangement Non-potable distribution pipework Connections to drainage Civil works and tank installation (assumption normal ground conditions) System installation & commissioning TOTAL COST

Cost £ 18,000 4,000 1,000 1,000 7,000 2,000 33,000

Rainwater Harvesting Payback Considerations Annual water saving: 1100 m³ @ average cost £2.00 / m³ = £2200 Annual Maintenance and system energy cost = £700 Indicative payback period = 33,000/1,500 = 22 years Grey water recycling scenario: Urban leisure hotel building with 200 bedrooms offers little opportunity for rainwater harvesting but has a grey water demand of up to 12000 litres per day for toilet and urinal flushing, plus a laundry. The grey water recycling plant is located in a basement plant room. Grey water recycling cost breakdown System tanks and controls Mains water back-up and distribution pump arrangement Non-potable distribution pipework Grey water waste collection pipework Connections to drainage System installation & commissioning TOTAL COST Grey Water Recycling Payback Considerations Annual water saving: 4260 m³ @ average cost £2.00 / m³ = £8,520 Annual Maintenance and system energy cost = £2,000 Indicative payback period = 52,500/6,520 = 8 years Exclusions   

Site organisation and management costs other than specialist contractor’s allowances Contingency/design reserve Main contractor’s overhead and profit or management fee

Cost £ 34,000 4,000 4,000 4,500 1,000 5,000 52,500

14

   

Grey Water Recycling and Rainwater Harvesting

Professional fees Tax allowances Value Added Tax Inflation beyond third quarter 2007

Conclusions There is a justified and growing interest in saving and recycling water by way of both grey water recycling and rainwater harvesting. The financial incentive at today’s water cost is not great for small or inefficient systems but water costs are predicted to rise and demand to increase – not least as a result of population growth. The payback periods for the above scenarios are not intended to compare to potential payback periods of rainwater harvesting against grey water recycling but rather to illustrate the importance of choosing ‘horses for courses’. The office building with its relatively small roof area and limited demand for toilet flushing results in a fairly inefficient system. Burying the collection tank also adds a cost so that payback exceeds 20 years. Payback periods of less than 10 years are feasible for buildings with large roofs and a large demand for toilet flushing or for other uses. Therefore sports stadia, exhibition halls, supermarkets, schools and similar structures are likely to be suitable. The hotel scenario is good application for grey water recycling. Many hotels and residential developments will generate more than enough grey water to meet the demand for toilet flushing etc. and in these circumstances large quantities of water can be saved and recycled with attractive payback periods.

Ground Water Cooling

The use of ground water cooling systems, considering the technical and cost implications of this renewable energy technology. The application of ground water cooling systems is quickly becoming an established technology in the UK with numerous installations having been completed for a wide range of building types, both new build and existing (refurbished). Buildings in the UK are significant users of energy, accounting for 60% of UK carbon emissions in relation to their construction and occupation. The drivers for considering renewable technologies such as groundwater cooling are well documented and can briefly be summarised as follows:   



Government set targets – The Energy White Paper, published in 2003, setting a target of producing 10% of UK electricity from renewable sources by 2010 and the aspiration of doubling this by 2020. The proposed revision to the Building Regulations Part L 2006, in raising the overall energy efficiency of non domestic buildings, through the reduction in carbon emissions, by 27%. Local Government policy for sustainable development. In the case of London, major new developments (i.e. City of London schemes over 30,000m2) are required to demonstrate how they will generate a proportion of the site’s delivered energy requirements from on-site renewable sources where feasible. The GLA’s expectation is that, overall, large developments will contribute 10% of their energy requirement using renewables, although the actual requirement will vary from site to site. Local authorities are also likely to set lower targets for buildings which fall below the GLA’s renewables threshold. Company policies of building developers and end users to minimise detrimental impact to the environment.

The Ground as a Heat Source/Sink The thermal capacity of the ground can provide an efficient means of tempering the internal climate of buildings. Whereas the annual swing in mean air temperature in the UK is around 20 K, the temperature of the ground is far more stable. At the modest depth of 2m, the swing in temperature reduces to 8 K, while at a depth of 50m the temperature of the ground is stable at 11–13°C. This stability and ambient temperature therefore makes groundwater a useful source of renewable energy for heating and cooling systems in buildings. Furthermore, former industrial cities like Nottingham, Birmingham, Liverpool and London have a particular problem with rising ground water as they no longer need to abstract water from below ground for use in manufacturing. The use of groundwater for cooling is therefore encouraged by the Environment Agency in areas with rising groundwater as a means of combating this problem. System Types Ground water cooling systems may be defined as either open or closed loop. Open Loop Systems Open loop systems generally involve the direct abstraction and use of ground water, typically from aquifers (porous water bearing rock). Water is abstracted via one or more boreholes and passed through a heat exchanger and is returned via a separate borehole or boreholes, discharged to foul water drainage or released into a suitable available source such as a river. Typical ground water supply temperatures are in the range 6–10°C and typical reinjection temperatures 12–18°C (subject to the requirements of the abstraction licence).

16

Ground Water Cooling

Open loop systems fed by groundwater at 8°C, can typically cool water to 12°C on the secondary side of the heat exchanger to serve conventional cooling systems. Open loop systems are thermally efficient but overtime can suffer from blockages caused by silt, and corrosion due to dissolved salts. As a result, additional cost may be incurred in having to provide filtration or water treatment, before the water can be used in the building. Abstraction licence and discharge consent needs to be obtained for each installation, and this together with the maintenance and durability issues can significantly affect whole life operating costs, making this system less attractive. Closed Loop Systems Closed loop systems do not rely on the direct abstraction of water, but instead comprise a continuous pipework loop buried in the ground. Water circulates in the pipework and provides the means of heat transfer with the ground. Since ground water is not being directly used, closed loop systems therefore suffer fewer of the operational problems of open loop systems, being designed to be virtually maintenance free, but do not contribute to the control of groundwater levels. There are two types of closed loop system: Vertical Boreholes –

Vertical loops are inserted as U tubes into pre drilled boreholes, typically less than 150mm in diameter. These are backfilled with a high conductivity grout to seal the bore, prevent any cross contamination and to ensure good thermal conductivity between the pipe wall and surrounding ground. Vertical boreholes have the highest performance and means of heat rejection, but also have the highest cost due to associated drilling and excavation requirements. As an alternative to having a separate borehole housing the pipe loop, it can also be integrated with the piling, where the loop is encased within the structural piles. This obviously saves on the costs of drilling and excavation since these would be carried out as part of the piling installation. The feasibility of this option would depend on marrying up the piling layout with the load requirement, and hence the number of loops, for the building.

Horizontal Loops –

These are single (or pairs) of pipes laid in 2m deep trenches, which are backfilled with fine aggregate. These obviously require a greater physical area than vertical loops but are cheaper to install. As they are located closer to the surface where ground temperatures are less stable, efficiency is lower compared to open systems. Alternatively, coiled pipework can also be used where excavation is more straightforward and a large amount of land is available. Although performance may be reduced with this system as the pipe overlaps itself, it does represent a cost effective way of maximising the length of pipe installed and hence overall system capacity.

The Case for Heat Pumps Instead of using the groundwater source directly in the building, referred to as passive cooling, when coupled to a reverse cycle heat pump, substantially increased cooling loads can be achieved. Heat is extracted from the building and transferred by the heat pump into the water circulating through the loop. As it circulates, it gives up heat to the cooler earth, with the cooler water returning to the heat pump to pick up more heat. In heating mode the cycle is reversed, with the heat being extracted from the earth and being delivered to the HVAC system. The use of heat pumps provides greater flexibility for heating and cooling applications within the building than passive systems. Ground source heat pumps are inherently more efficient than air source heat pumps, their energy

Ground Water Cooling

17

requirement is therefore lower and their associated CO2 emissions are also reduced, so they are well suited for connection to a groundwater source. Closed loop systems can typically achieve outputs of 50W/m (of bore length), although this will vary with geology and borehole construction. When coupled to a reverse cycle heat pump, 1m of vertical borehole will typically deliver 140kWh of useful heating and 110kWh of cooling per annum, although this will depend on hours run and length of heating and cooling seasons. Key Factors Affecting Cost 

The cost is obviously dependant on the type of system used. Deciding on what system is best suited to a particular project is dependant on the peak cooling and heating loads of the building and its likely load profile. This in turn determines the performance required from the ground loop, in terms of area of coverage in the case of the horizontal looped system, and in the case of vertical boreholes, the depth and number or bores. The cost of the system is therefore a function of the building load.



In the case of vertical boreholes, drilling costs are significant factor, as specific ground conditions can be variable, and there are potential problems in drilling through sand layers, pebble beds, gravels and clay, which may mean additional costs through having to drill additional holes or the provision of sleeving etc. The costs of excavation obviously make the vertical borehole solution significantly more expensive than the equivalent horizontal loop.



The thermal efficiency of the building is also a factor. The higher load associated with a thermally inefficient building obviously results in the requirement for a greater number of boreholes or greater area of horizontal loop coverage, however in the case of boreholes the associated cost differential between a thermally inefficient building and a thermally efficient one is substantially greater than the equivalent increase in the cost of conventional plant. Reducing the energy consumption of the building is cheaper than producing the energy from renewables and the use of renewable energy only becomes cost effective, and indeed should only be considered, when a building is energy efficient.



With open loop systems, the principal risk in terms of operation is that the user is not in control of the quantity or quality of the water being taken out of the ground, this being dependant on the local ground conditions. Reduced performance due to blockage (silting etc.) may lead to the system not delivering the design duties whilst bacteriological contamination may lead to the expensive water treatment or the system being taken temporarily out of operation. In order to mitigate the above risk, it may be decided to provide additional means of heat rejection and heating by mechanical means as a back up to the borehole system, in the event of operational problems. This obviously carries a significant cost. If this additional plant were not provided, then there are space savings to be had over conventional systems due to the absence of heating, heat rejection and possibly refrigeration plant.



Open loop systems may lend themselves particularly well to certain applications increasing their cost effectiveness, i.e. in the case of a leisure centre, the removal of heat from the air conditioned parts of the centre and the supply of fresh water to the swimming pool.



In terms of the requirements for abstraction and disposal of the water for open loop systems, there are risks associated with the future availability and cost of the necessary licenses; particularly in areas of high forecast energy consumption, such as the South East of England, which needs to be borne in mind when selecting a suitable system.

Whilst open loop systems would suit certain applications or end user clients, for commercial buildings the risks associated with this system tend to mean that closed loop applications are the system of choice. When coupled to a reversible heat pump, the borehole acts simply as a heat sink or heat source so the problems associated with open loop systems do not arise.

18

Ground Water Cooling

Typical Costs Table 1 gives details of the typical borehole cost to an existing site in Central London, using one 140m deep borehole working on the open loop principle, providing heat rejection for the 600kW of cooling provided to the building. The borehole passes through rubble, river gravel terraces, clay and finally chalk, and is lined above the chalk level to prevent the hole collapsing. The breakdown includes all costs associated with the provision of a working borehole up to the well head, including the manhole chamber and manhole. The costs of any plant or equipment from the well head are not included. Heat is drawn out of the cooling circuit and the water is discharged into the Thames at an elevated temperature. In this instance, although the boreholes are more expensive than the dry air cooler alternative, the operating cost is significantly reduced as the system can operate at around three times the efficiency of conventional dry air coolers, so the payback period is a reasonable one. Additionally, the borehole system does not generate any noise, does not require rooftop space and does not require as much maintenance. This is representative of a typical cost of providing a borehole for an open loop scheme within the London basin. There are obviously economies of scale to be had in drilling more than one well at the same time, with two wells saving approximately 10% of the comparative cost of two separate wells and four wells typically saving 15%. Table 2 provides a summary of the typical range of costs that could expected for the different types of system based on current prices.

Ground Water Cooling

19

Table 1: Breakdown of the Cost of a Typical Open Loop Borehole System Description

Cost £

General Items  Mobilisation, Insurances, demobilisation on completion  Fencing around working area for the duration of drilling and testing  Modifications to existing LV panel and installation of new power supplies for borehole installation

20,000 2,000 14,000

Trial Hole  Allowance for breakout access to nearest walkway (Existing borehole on site used for trial purposes, hence no drilling costs included)

3,000

Construct Borehole  Drilling, using temporary casing where required, permanent casing and grouting

31,000

Borehole Cap and Chamber  Cap borehole with PN16 flange, construct manhole chamber in roadway, rising main, header pipework, valves, flow meter  Permanent pump

12,000 13,000

Samples  Water samples

300

Acidisation  Mobilisation, set up and removal of equipment for acidisation of borehole, carry out acidisation

11,500

Development and Test Pumping  Mobilise pumping equipment and materials and remove on completion of testing  Calibration test, pre-test monitoring, step testing  Constant rate testing and monitoring  Waste removal and disposal

4,000 3,500 19,000 3,000

Reinstatement  Reinstatement and Making Good

1,500 Total

144,300

20

Ground Water Cooling

Table 2: Summary of the Range of Costs for Different Systems

System Heat pump (per unit) Slinky pipe (per installation) including excavation Vertical, closed (per installation) using structural piles Vertical, closed (per installation) including excavation Vertical, open (per installation) including excavation

Small–4kWth £ 3,500–4,500 £ 3,000–4,000

Range Medium–50kWth £ 30,000–40,000 £ 40,000–50,000

Large–400kWth £ 140,000–170,000 £ 360,000–390,000(1)

N/A

£ 40,000–60,000

Not available

£ 2,000–3,000

£ 60,000–80,000

£ 360,000–390,000

£ 2,000–3,000

£ 45,000–65,000

£ 330,000–360,000

Notes (1)

Based on 90 nr 50m lengths

Based on 50 nr piles. Includes borehole cap and header pipework but excludes connection to pump room and heat pumps Includes borehole cap and header pipework but excludes connection to pump room and heat pumps Excludes connection to pump room and heat exchangers

Fuel Cells

The Application of Fuel Cell Technology within Buildings Fuel cells are electrochemical devices that convert the chemical energy in fuel into electrical energy directly, without combustion, with high electrical efficiency and low pollutant emissions. They represent a new type of power generation technology that offers modularity, efficient operation across a wide range of load conditions, and opportunities for integration into co-generation systems. With the publication of the energy white paper in February this year, the Government confirmed its commitment to the development of fuel cells as a key technology in the UK’s future energy system, as the move is made away from a carbon based economy. There are currently very few fuel cells available commercially, and those that are available are not financially viable. Demand has therefore been limited to niche applications, where the end user is willing to pay the premium for what they consider to be the associated key benefits. Indeed, the UK currently has only one fuel cell in regular commercial operation. However, fuel cell technology has made significant progress in recent years, with prices predicted to approach those of the principal competition in the near future. Fuel Cell Technology A fuel cell is composed of an anode (a negative electrode that repels electrons), an electrolyte membrane in the centre, and a cathode (a positive electrode that attracts electrons). As hydrogen flows into the cell on the anode side, a platinum coating on the anode facilitates the separation of the hydrogen gas into electrons and protons. The electrolyte membrane only allows the protons to pass through to the cathode side of the fuel cell. The electrons cannot pass through this membrane and flow through an external circuit to form an electric current. As oxygen flows into the fuel cell cathode, another platinum coating helps the oxygen, protons, and electrons combine to produce pure water and heat. The voltage from a single cell is about 0.7 volts, just enough for a light bulb. However by stacking the cells, higher outputs are achieved, with the number of cells in the stack determining the total voltage, and the surface area of each cell determining the total current. Multiplying the two together yields the total electrical power generated. In a fuel cell the conversion process from chemical energy to electricity is direct. In contrast, conventional energy conversion processes first transform chemical energy to heat through combustion and then convert heat to electricity through some form of power cycle (e.g. gas turbine or internal combustion engine) together with a generator. The fuel cell is therefore not limited by the Carnot efficiency limits of an internal combustion engine in converting fuel to power, resulting in efficiencies 2 to 3 times greater.

22

Fuel Cells

Fuel Cell Systems In addition to the fuel cell itself, the system comprises the following sub-systems:     

A fuel processor – This allows the cell to operate with available hydrocarbon fuels, by cleaning the fuel and converting (or reforming) it as required A power conditioner – This regulates the dc electricity output of the cell to meet the application, and to power the fuel cell auxiliary systems An air management system – This delivers air at the required temperature, pressure and humidity to the fuel stack and fuel processor A thermal management system – This heats or cools the various process streams entering and leaving the fuel cell and fuel processor, as required A water management system – Pure water is required for fuel processing in all fuel cell systems, and for dehumidification in the PEMFC

The overall electrical conversion efficiency of a fuel cell system (defined as the electrical power out divided by the chemical energy into the system, taking into account the individual efficiencies of the sub-systems) ranges from 35–55%. Taking into account the thermal energy available from the system, the overall or cogeneration efficiency is 75–90%. Also, unlike most conventional generating systems (which operate most efficiently near full load, and then suffer declining efficiency as load decreases), fuel cell systems can maintain high efficiency at loads as low as 20% of full load. Fuel cell systems also offer the following potential benefits:          

At operating temperature, they respond quickly to load changes, the limiting factor usually being the response time of the auxiliary systems They are modular and can be built in a wide range of outputs. This also allows them to be located close to the point of electricity use, facilitating cogeneration systems Noise levels are comparable with residential or light commercial air conditioning systems Commercially available systems are designed to operate unattended and manufactured as packaged units Since the fuel cell stack has no moving parts, other than the replacement of the stack at 3-5 year intervals there is little on-site maintenance. The maintenance requirements are well established for the auxiliary system plant Fuel cell stacks fuelled by hydrogen produce only water, therefore the fuel processor is the primary source of emissions, and these are significantly lower than emissions from conventional combustion systems Since fuel cell technology generates 50% more electricity than the conventional equivalent without directly burning any fuel, CO2 emissions are significantly reduced in the production of the source fuel Potentially zero carbon emissions when using hydrogen produced from renewable energy sources The facilitation of embedded generation, where electricity is generated close to the point of use, minimising transmission losses The fast response times of fuel cells offer potential for use in UPS systems, replacing batteries and standby generators

Types of Fuel Cell There are four main types of fuel cell technology that are applicable for building systems, classed in terms of the electrolyte they use. The chemical reactions involved in each cell are very different. Phosphoric Acid Fuel Cells (PAFCs) are the dominant current technology for large stationary applications and have been available commercially for some time. The only working fuel cell installation in the UK, in Woking, uses a PAFC, rated at 200kW. There is less potential for PAFC unit cost reduction than for some other fuel cell systems, and this technology may be superseded in time by the other technologies.

Fuel Cells

23

The Solid Oxide Fuel Cell (SOFC) offers significant flexibility due to its large power range and wide fuel compatibility. SOFCs represent one of the most promising technologies for stationary applications. There are difficulties when operating at high temperatures with the stability of the materials, however, significant further development and cost reduction is anticipated with this type. The relative complexity of Molten Carbonate Fuel Cells (MCFCs) has tended to limit developments to large scale stationary applications, although the technology is still very much in the development stages. The quick start-up times and size range make Proton Exchange Membrane Fuel Cells (PEMFCs) suitable for small to medium sized stationary applications. They have a high power density and can vary output quickly, making them well suited for transport applications as well as UPS systems. The development efforts in the transport sector suggest there will continue to be substantial cost reductions over both the short and long term. All four technologies remain the subject of extensive research and development programmes to reduce initial costs and improve reliability through improvements in materials, optimisation of operating conditions and advances in manufacturing. It is expected that all types will be commercially available in limited markets by 2006 and with mass market availability by 2010. The Market for Fuel Cells The stationary applications market for fuel cells can be sectaries as follows: 

Distributed generation/CHP – For large scale applications, there are no drivers specifically advantageous to fuel cells, with economics (and specifically initial cost) therefore being the main consideration. So, until cost competitive and thoroughly proven and reliable fuel cells are available, their use is likely to be limited to niche applications such as environmentally sensitive areas from 2005. Wider commercialisation is likely closer to 2010, with high temperature cells (MCFCs and SOFCs) being most suitable, although PEMFCs may preferable in specific areas, i.e. where hydrogen is available.



Domestic and small scale CHP – The drivers for the use of fuel cells in this emerging market are better value for customers than separate gas and electricity purchase, reduction in domestic CO2 emissions, and potential reduction in electricity transmission costs. However, the barriers of resistance to distributed generation, high capital costs and competition from Stirling engines needs to be overcome. Commercialisation depends on cost reduction, and successful demonstration which is expected to begin in the next 2–3 years, leading to wider commercialisation before 2010. Systems based on SOFCs and PEMFCs are being developed for this application.



Small generator sets and remote power – The drivers for the use of fuel cells are high reliability, low noise and low refuelling frequencies, which cannot be met by existing technologies. Since cost is often not the primary consideration, fuel cells will find early markets in this sector. Existing PEMFC systems are close to meeting the requirements in terms of cost, size and performance. Small SOFCs have potential in this market, but require further development.

Cost Comparison Table 1 provides an indication of the capital and operating costs of the different fuel cell types, together with comparative figures for the existing technologies. The projected figures for the fuel cell technologies are based on economies typically achieved through mass manufacture. The projected costs for 2007 show the fuel cell technologies still being significantly more expensive than the existing technologies. To extend fuel cell application beyond niche markets, their cost needs to reduce significantly. The successful and wide-spread commercial application of fuel cells is dependant on the projected cost reductions indicated, with electricity generated from fuel cells being competitive with current centralised and distributed power generation.

24

Fuel Cells

It has been estimated that if the cost reductions are met, fuel cells could achieve up to 50% penetration of the global distributed energy market by 2020. Typical Current Project Costs Table 2 gives an indication of the typical cost breakdown to be expected for the installation of a fuel cell system in the UK. This is based on information from the manufacturer and from economic evaluation/feasibility studies, since with only one working system installed to date in the UK there is no available accurate cost data. The unit is a standard commercially available PAFC, complete with fuel processor, fuel stack and power conditioning system. The parameters are as follows:        

Rating – 200kW/235kVA, 400V, 3ph Power generating efficiency – 40% Heat output – 204kW, 60°C hot water Fuel, consumption – Natural gas, 54m³/hr External location Size – 5.5m x 3m x 3m (h) Weight – 20 tons Noise level at full load – 62dBA at 10m

The above illustrates the fact that the costs to supply, install and set to work a modestly sized fuel cell unit are prohibitively high, compared with incumbent generator technologies. Despite being the only commercially available unit, only 220 units have been sold worldwide, and so the full benefits of volume manufacture have not been realised, and a proportion of the costs associated with developing the unit is included within the unit cost. Conclusions Despite significant growth in recent years, fuel cells are still at a relatively early stage of commercial development, with prohibitively high capital costs preventing them from competing with the incumbent technology in the market place. However, costs are forecast to reduce significantly over the next five years as the technology moves from niche applications, and into mass production. However, in order for these projected cost reductions to be achieved, customers need to be convinced that the end product is not only cost competitive but also thoroughly proven, and Government support represents a key part in achieving this. The Governments of Canada, USA, Japan and Germany have all been active in supporting development of the fuel cell sector through integrated strategies, however the UK has been slow in this respect, and support has to date been small in comparison. It is clear that without Government intervention, fuel cell applications may struggle to reach the cost and performance requirements of the emerging fuel cell market.

Fuel Cells

25

Table 1: Cost Comparison for Stationary Generation Equipment Period Fuel Cell Type PEMFC

PAFC

MCFC

SOFC

£

£

£

£

2004

2,600–6,500

2,000–3,400

2,000–5,000

5,000–10,000

2006

1,500

1,900

1,850

2,300

2010 (Projected)

700

1,500

950

1,000

2015 (Projected)

500

1,300

700

750

2020 (Projected)

300

1,100

550

550

0.04–0.06

0.08

0.04–0.08

0.05

0.003–0.01

0.003–0.01

0.003–0.01

0.003–0.01

Capital Costs (£/kW)

Operating Costs (£/kW/h) 2004 Maintenance Costs (£/kW/h) 2006 Period

Conventional Systems Internal Combustion – Generator

Micro Turbine – Generator

Gas Turbine

Steam turbine

£

£

£

£

2004

-

-

-

-

2006

200–820

450–820

450–570

500–630

2010 (Projected)

-

-

-

-

2015 (Projected)

-

-

-

-

2020 (Projected)

-

-

-

-

-

-

-

-

0.005–0.01

0.002–0.01

0.002–0.06

0.003

Capital Costs (£/kW)

Operating Costs (£/kW/h) 2004 Maintenance Costs (£/kW/h) 2006

26

Fuel Cells

Table 2: Breakdown of Typical Project Costs Item

£

Fuel Cell Stack Fuel Processor Plant Labour

225,000 85,000 113,600 113,400

Total

567,000

Delivery to Site (Outside USA)

20,000

Installation Costs (Site and Application dependant) Standard (Generation Only) Non Standard CHP

50,000 80,000 100,000–200,000

Spares Maintenance

10% of Capital Cost 16,000–26,000 pa

Total (£/kW)

3,549–4,415

Fuel Stack Fuel Stack Replacement Fuel Stack Refurbishment

150,000 every 4 years 120,000 every 4 years

Note: Excludes Incoming Gas Supply, BWIC, Main Contractor’s Overheads ad Profit, attendance, Preliminaries and Professional Fees etc, VAT.

Biomass Energy

The potential for biomass energy systems, with regards to the adequacy of the fuel supply and the viability of various system types at different scales. Biomass heating and combined heat and power (CHP) systems have become a major component of the lowcarbon strategy for many projects, as they can provide a large renewable energy component at a relatively low initial cost. Work by the Carbon Trust has demonstrated that both large and small biomass systems were viable even before recent increases in gas and fuel oil prices, so it is no surprise that recent research by South Bank University into the renewables strategies to large London projects has found that 25% feature biomass or biofuel systems. These proposals are not without risk, however. Although the technology is well established, few schemes are in operation in the UK and the long-term success depends more on the effectiveness of the local supply chain than the quality of the design and installation. How the Biomass Market Works Biomass is defined as living or recently dead biological material that can be used as an energy source. Biomass is generally used to provide heat, generate electricity or drive CHP engines. The biomass family includes biofuels, which are being specified in city centre schemes, but which provide lower energy outputs and could transfer farmland away from food production. In the UK, much of the focus in biomass development is on the better utilisation of waste materials such as timber and the use of set-aside land for low-intensity energy crops such as willow, rather than expansion of the biofuels sector. There are a variety of drivers behind the development of a biomass strategy. In addition to carbon neutrality, another policy goal is the promotion of the UK’s energy security through the development of independent energy sources. A third objective is to address energy poverty, particularly for off-grid energy users, who are most vulnerable to the effects of high long-term costs of fuel oil and bottled gas. Biomass’ position in the zero-carbon hierarchy is a little ambiguous in that its production, transport and combustion all produce carbon emissions, albeit most is offset during a plant’s growth cycle. The key to neutrality is that the growing and combustion cycles need to occur over a short period, so that combustion emissions are genuinely offset. Biomass strategy is also concerned about minimising waste and use of landfill, and the ash produced by combustion can be used as a fertiliser. Dramatic increases in fossil fuel prices have swung considerations decisively in favour of technologies such as biomass. Research by the Carbon Trust has demonstrated that, with oil at $50 (£25) a barrel, rates of return of more than 10% could be achieved with both small and large heating installations. CHP and electricity-only schemes have more complex viability issues linked to renewable incentives, but with oil currently trading at over ($100) £50 a barrel and a plentiful supply of source material, it is argued that biomass input prices will not rise and so the sector should become increasingly competitive.

28

Biomass Energy

The main sources of biomass in the UK include:    

Forestry crops, including the waste products of tree surgery industry Industrial waste, particularly timber, paper and card: timber pallets account for 30% of this waste stream by weight Woody energy crops, particularly those grown through ‘short rotation’ methods such as willow coppicing Wastes and residues taken from food, agriculture and manufacturing

Biomass is an emerging UK energy sector. Most suppliers are small and there remains a high level of commercial risk associated with finding appropriate, reliable sources of biomass. This is particularly the case for larger-scale schemes such as those proposed for Greater London, which will have sourced biomass either from multiple UK suppliers or from overseas. Many have adopted biofuels as an alternative. The UK’s only large-scale biomass CHP in Slough has a throughput of 180,000 tonnes of biomass per year requiring the total production of more than 20 individual suppliers – not a recipe for easy management or product consistency. However, Carbon Trust research has identified significant potential capacity in waste wood (5 million to 6 million tonnes) and short-rotation coppicing, which could create the conditions for wider adoption of small and large-scale biomass. Biomass Technologies A wide range of technologies have been developed for processing various forms of biomass, including anaerobic digesters and gasifiers. However, the main biomass technology is solid fuel combustion, as a heat source, CHP unit or energy source for electricity generation. Solid fuel units use either wood chippings or wood pellets. Wood chippings are largely unprocessed and need few material inputs, other than seasoning, chipping and transport. Wood pellets are formed from compressed sawdust. As a result they have a lower moisture content than wood chippings and consistent dimensions, so are easier to handle but are about twice as expensive. Solid fuel burners operate in the same way as other fossil fuel-based heat sources, with the following key differences: 

    

 

Biomass heat output can be controlled but not instantaneously, so systems cannot respond to rapid load changes. Solutions to provide more flexibility include provision of peak capacity from gas-fired systems, or the use of thermal stores that capture excess heat energy during off-peak periods, enabling extended operation of the biomass system itself Heat output cannot be throttled back by as much as gas-fired systems, so for heat-only installations it may be necessary to have an alternative summer system for water heating, such as a solar collector Biomass feedstock is bulky and needs a mechanised feed system as well as extensive storage Biomass systems are large, and the combustion unit, feed hopper and fuel store take up substantial floor area. A large unit with an output of 500kW has a footprint of 7.5m x 2m Biomass systems need maintenance related to fuel deliveries, combustion efficiency, ash removal, adding to the lifetime cost Fuel stores need to be physically isolated from the boiler and the rest of the building in order to minimise fire risk. The fuel store needs to be sized to provide for at least 100 hours of operation, which is approximately 100m² for a 500kW boiler. The space taken up by storage and delivery access may compromise other aspects of site planning Fire-protection measures include anti-blowback arrangements on conveyors and fire dampers, together with the specification of elements such as flues for higher operating temperatures Collocation of the fuel source and burner at ground level require larger, free-standing flues

As a result of these issues, which drive up initial costs, affect development efficiency and add to management overheads, take-up of biomass has initially been mostly at the small-scale, heat-only end of the market, based on locally sourced feedstock. In such systems the initial cost premium of the biomass boiler can be offset against longterm savings in fuel costs.

Biomass Energy

29

Sourcing Biomass Compared with solar or wind power installations, the initial costs of biomass systems are low, the technology is well established and energy output is dependable. As a result, the real challenge for successful operation of a biomass system is associated with the reliable sourcing of feedstock. Heat-only systems themselves cost between £150 and £750 per kW (excluding costs of storage), depending on scale and technology adopted. This compares with a typical cost of £50 to £300 per kW for a gas-fired boiler – which does not require further investment in fuel or thermal storage bunkers. As a high proportion of lifetime cost is associated with the operation of a system, availability of good-quality, locally sourced feedstock is essential for long-term viability – particularly in areas where incentivisation through policies like the Merton rule is driving up demand. Research funded by BioRegional in connection with medium-scale biomass systems in the South-east shows that considerable feedstock is already in the system but far more is required to respond to emerging requirements. The researchers estimate that the existing biomass resource within 25km of London totals 330,000 tonnes a year, sourced from waste wood, energy crops and forestry (tree-surgery) byproducts. However, they calculate that a new 2,000-unit low-energy residential system would require 35,000 tonnes a year. This means that London’s total biomass would have the potential to support the equivalent heating load of just 20,000 homes. Fortunately, the scale of the UK’s untapped resource is considerable, with 5 million to 6 million tonnes of waste wood going to landfill annually, and 680,000ha of set-aside land that could be used for energy crops without affecting agricultural output. Based on these figures, it is estimated that 15% of the UK’s building-related energy load could be supported without recourse to imported material. However, the supply chain is fragmented in terms of producers, processors and distributors – presenting potential biomass users with a range of complexities that gas users simply do not need to worry about. These include: 

 



Ensuring quality. Guaranteeing biomass quality is important for the assurance of performance and reliability. Variation in moisture content affects combustion, while inconsistent woodchip size or differences in sawdust content can result in malfunction. The presence of contaminants in waste wood causes problems too. Highprofile schemes including the 180,000-tonne generator in Slough have had to shutdown because of variations in fuel quality. Use of pellets reduces to risk, but they are more expensive and require more energy for processing and transport Functioning markets. The scale of trade in biomass compares unfavourably with gas or oil, in that there are no standard contracts, fixed-price deals or opportunities for hedging which enable major users to manage their energy cost risk Security of supply. The potential for competing uses could lead to price inflation. Biofuels carry the greatest such risk, but many biomass streams have alternative uses. Lack of capacity in the marketplace is another security issue, with no mechanism to encourage strategic stockpiling for improved response to crop failure or fluctuations in demand Installation and maintenance infrastructure. The different technologies used in biomass systems creates maintenance requirements not yet met by a readily available pool of skilled system engineers

Optimum Uses of Biomass Technology Biomass is a high-grade, locally available source of energy that can be used at a range of scales to support domestic and commercial use. Following increases in fossil fuel prices, one of the main barriers to adoption is, now, the capability of the supply chain. The Carbon Trust’s biomass sector review, completed before the large energy price rises in 2007, drew the following key conclusions about the most effective application of the technologies:

30

    

Biomass Energy

Returns on CHP and electricity-generating systems depend heavily on government incentives such as renewable obligations certificates. Under the present arrangements, large CHP systems provide the best returns Heat-only systems are very responsive to changes in fuel prices, with systems at all scales providing returns in excess of 10% when oil prices are at $50 (£25) a barrel Small-scale heat-only plants produce the best returns, because the cost of the displaced fuel (typically fuel oil) is more expensive Small-scale electricity and large-scale heat-only installations produce very poor returns There is little difference in the impact of fuel type in the returns generated by projects

The study also concluded that heat installations at all scales had the greater potential for carbon saving, based on a finite supply of biomass. This is because heat-generating processes have the greatest efficiency and, in the case of small-scale systems in isolated, off-grid dwellings, displace fuels such as oil that have the greatest carbon intensity. Ninety percent of the UK’s existing biomass resource of 5.6m tonnes per annum could be used in displacing carbon-intensive off-grid heating, saving 2.5m tonnes of carbon emissions. Small-scale systems are well established in Europe and the existing local supply chain suits the demand pattern. In addition, since the target market is in rural, off-grid locations, affected dwellings are less likely to suffer space constraints related to storage. As fuel costs continue to rise, the benefits of avoiding fuel poverty, combined with the effective reduction of carbon emissions from existing buildings, mean smaller systems are likely to offer the best mid-term use of the existing biomass supply base, with large-scale systems being developed as the supply chain matures and expands. Large-scale systems also offer the opportunity to generate significant returns, but the barriers that developers or operators face are significant, particularly if there is an electricity supply component, which requires a supply agreement. However, while developers are required to delivery renewable energy on site, biomass in the form of biofuels, has the great attraction of being able to provide a scale of renewable energy generation that other systems such as ground source heating or photovoltaics simply cannot compete with. Whether biomass plant should be used on commercial schemes in urban locations is potentially a policy issue. Sizing of both CHP and heat-only systems should be determined by the heat load, which for city-centre schemes may not be that large – affecting the potential for the CHP component. The costs of a district heating element on these schemes may also be prohibitively high, and considerations of biomass transport and storage also make it harder to get city-centre schemes to stack up. It may be a more appropriate policy to encourage industrial users or large scale regenerators to take first call on the expanding biomass resource, rather than commercial schemes. The launch of a 45MW biomass power station in Scotland illustrates this trend. Data shows that 50% of the market potential for industrial applications of CHP could utilise 100% of the UK’s available biomass resource. The issues that city-centre biomass schemes face in connection with storage, transport, emissions and supply chain management might be better addressed by industrial users or their energy suppliers in low-cost locations rather than by developers in prime city-centre sites.

Biomass Energy

31

Indicative costs System

Indicative load kW

Capital cost (£/kWh)

Gas-fired boiler

50 400

85 45

Biomass-fired boiler

50 500

500 250

1,000

450

Biomass-fired CHP

Allowance for stand-alone boiler house and fuel store £30,000–60,000 for 50kWh system indicative costs exclude flues and plant room installation

Fuel costs Wood chip: 1.5 to 2.5p/kWh Wood pellet: 3 to 4.5p/kWh Fuel oil: 4.3 to 4.8p/kWh Natural gas: 2.5 to 3.2p/kWh Bottled LPG: 6.8 to 7p/kWh

Getting the Connection

Details the process involved in the provision of a new electrical supply to a site. The provision of an electricity connection has both a physical and contractual element. Physically, it involves the design, planning and construction of electrical infrastructure (cables, switchgear, civil works), whilst contractually, it requires legal agreements to be drawn up and agreed (construction, connection, adoption). Planning The Planning Stage, typically RIBA Stage C, is where the site’s developer (the Developer) should be formulating their plans for the scheme and, in doing so, consult the local distribution network operator’s (the Host)1 long-term development statement, which will identify potential connection point opportunities. This information is normally readily available from the Host for a small fee and should provide an early indication of whether the Host’s network may need to be reinforced before the development can be connected. As the Planning Stage progresses, the Developer should discuss its proposals with the Host. Relatively simple connections for single building supplies are straight forward, however schemes of a more complex nature may require some form of feasibility study to be carried out to assess connection options and provide indicative costs for the contestable2 and non-contestable3 work elements. Design The Design Stage, typically RIBA Stage D, is the point at which the Developer submits its formal connection request to the Host. It is important that this is completed in accordance with the specific procedures of the Host, since if it does not include all supporting information required by the Host’s application process, there is likely to be a delay in the processing of a firm offer. The Host is expected to provide a documented application process to assist the applicant make a complete application. The convention is to request a Section 16/16A connection4 where the terms are standard and non-negotiable. The alternative is a Section 22 connection2 offer, where the terms are fully negotiable. If the Section 22 route is chosen then caution is required, as disputes over Section 22 agreements cannot be referred to the regulator for determination after the connection agreement has been signed; a post contract dispute will have to be pursued as a civil action. It is always advised that a Section 16/16A offer is requested before considering the Section 22 option. On receipt of the Host’s firm offer5, the Developer generally has 90 days to accept its terms and to undertake its own review of the offer to ensure it meets its requirements. If for any reason the Developer and Host are unable to reach agreement of the terms, it is recommended that the Developer seeks specialist advice. It should be noted

1 A distribution network operator (DNO) is a company that is responsible for the design, construction operation and maintenance of a public electricity distribution network. The host DNO is the electricity distribution network to which the development site will directly connect. 2 Contestable is work in providing the connection that can be carried out by an accredited independent party. 3 Non contestable is work that can only be carried by the Host. 4 The Electricity Act 1989. 5 Unless the offer becomes interactive, i.e. another connection scheme is vying for network capacity. Where the connection request becomes interactive the Developer has 30 days to accept the offer. The Host will inform the Developer if the connection request is interactive.

34

Getting the Connection

that in extreme circumstances, it may be necessary to refer an issue to regulator for determination but, be warned, this can be a lengthy process, taking up to 16 weeks to conclude. Competition One of the key decisions affecting the way in which the connection process proceeds is whether the Developer wishes to introduce competition into the procurement process by appointing a third party to design and construct the contestable connection works. In these circumstances, the Developer can requisition a non contestable quotation from the Host or ask the third party to do so on its behalf. The Host is obliged to provide information within standardised time frames against which its performance is monitored by the industry regulator (Ofgem). Contestable works are those that may be carried out either by the Host or by an approved contractor, on the Developer’s behalf. This contrasts with non contestable works, which can only be carried out by the Host. Broadly speaking, the Host will make the connection to its network for the new supply and undertake any upstream network reinforcement works. All works downstream from the point of connection to the Host network into the site and to each building are contestable works. Therefore, the extent of the contestable works can vary significantly depending on where the point of connection is designated by the Host. Alternatively, the Developer can request an independent licensed network operator (IDNO) to adopt assets constructed by the third party. If the Developer decides to contract with a third party to construct the contestable works, it is the Developer’s responsibility to ensure that the construction works meet the Host’s network adoption requirements. Network Reinforcement Reinforcement works may be required to increase the capacity of the network to enable the connection to meet a site’s projected demand. In terms of the capacity made available by reinforcement, the following possible scenarios arise: 

Where reinforcement works are necessary for sole use by the Developer, the Developer is charged the full cost of the works. In some circumstances the most economic method of reinforcement may introduce spare network capacity in excess of the Developer’s requirements. In such circumstances the Developer can receive a rebate where this spare capacity is absorbed by subsequent developments. However, the possibility of a rebate is time constrained and the original development will only qualify for a rebate for up to 5 years after the connection is completed.



Where reinforcement works are necessary but also cater for the Host’s future network requirements, the Developer is charged for a proportion of the cost of the works in the form of a capital contribution. This is calculated using cost apportionment factors for security (the ratio of capacity requested to that which is made available) and fault level (the ratio of fault level contribution of connection to that which is made available).

The charges levied for reinforcement works are attributable to those reinforcement works undertaken at one voltage level above the connection voltage only. That is, if connection voltage is 400V then costs are chargeable for reinforcement works undertaken at the next highest voltage, which is usually 11kV, and not for works conducted at the next highest voltage, which is usually 33kV6. These deeper network reinforcement costs are recovered as part of the system charges built into the electricity supply tariffs.

Getting the Connection

35

Costs The cost of the Developer’s connection depends on the nature and extent of the works to be undertaken. The distance between the site and the Host’s network, the size of the customer demand in relation to available capacity (and hence the potential need for reinforcement), customer-specific timescales and to an extent market value of raw material and labour, are all significant factors that will affect the cost. As part of the firm offer received from the Host, the Developer is provided with a charging statement, which includes the charges to be levied for the following items: 

Assessment and Design – to identify and design the most appropriate point on the existing network for the connection



Design Approval – to ensure design of a connection meets the safety and operation requirements of the Host



Non-contestable Works/Reinforcement – to include circuits and plant forming part of the connection that can be undertaken by the Host only, including land rights issues and consents



Contestable Connection Works – to include circuits and plant forming part of the connection that can be undertaken by approved contractors or the Host



Inspection of Works – to ensure that works are being constructed in accordance with the design requirements of the Host



Commissioning of Works – to include circuit outages and testing that will ensure that connection is safe to be energised

In some circumstances, in addition to the cost of the physical connection works there may be chargeable costs associated with operation, maintenance repair and replacement of the new or modified connection. These are known as O&M costs and are chargeable as capitalised up-front costs where the Developer requests a solution that is in excess of the minimum necessary to provide the connection. For example, where extra resilience is requested for a connection, over and above that which the Host is obligated to provide, then O&M costs can be levied but only for the extra resilience element of the connection, not the total cost of the connection.

6 Some DNOs use voltages of 6.6kV and 22kV.

Façade Systems

The relationship between the building envelope and the provision of cooling in a building and how this affects office costs Attaining legislative and aspirational environmental performance criteria for any new project represents a key deliverable for the design team, which entails an intrinsic link between the services strategy and building envelope solutions. In this cost model, Building Services Cost Specialist Davis Langdon Engineering Services investigates the impact that air conditioning solutions can have upon the building envelope and the potential affect that this can have upon costs. The building envelope solution must accommodate a wide variety of criteria in addition to environmental performance, some of which could be perceived to contradict others. Figure 1 provides a simple illustration of the interrelated factors that need to be addressed in the design of a building façade. As environmental performance of our buildings becomes more stringent to reduce harmful greenhouse gas emissions it is clear that architectural intent could be heavily influenced by the ultimate building envelope solution. It may well be that certain criteria override others on specific projects, and so drive the ultimate solution.

Figure 1 Functions of a façade

It is therefore reasonable to state that design of the building envelope, particularly in the case of modern commercial office buildings, upon which this article is based, entails a managed balance between its performance and that of the services, taking cognisance of the primary frame design, in order to achieve a solution that fulfils the brief and delivers high quality whilst being commensurate with project specific requirements, including budget constraints.

38

Façade Systems

The building envelope provides an interface between the controlled internal environment of an office building and the variable external climate, thus ostensibly acting as a modifier of the direct effects of the climactic variables highlighted in Table 1, which are the primary parameters influencing thermal comfort and energy requirements within the building. In naturally ventilated and/or mixed mode buildings, where site locations are conducive (noise and air pollution), the indoor temperatures follow the diurnal cyclic pattern of outdoor temperature and solar radiation. This relationship between the outdoor temperature, solar radiation and indoor temperature is determined at a building level by the orientation, building form, optical and thermo physical properties of the building envelope. Likewise in an air-conditioned building, the properties of the building envelope determine the amount of cooling required. Thus a climatically responsive design of the building envelope is key to improving thermal comfort conditions and reducing energy consumption. When developing the design of new commercial office buildings, it should to be recognised that the balance between building envelope and services performance, whilst intrinsic, must dove tail with other key project specific criteria, including but not limited to:    

Architectural intent, to enable a high quality building solution, in terms of appearance and performance, ensuring whole life cost and performance efficiency Buildability, to ensure quality and build efficiency, thus keeping construction costs and programme to a minimum, taking cognisance of cleaning and long term maintenance of the building in use Procurement, ensuring that façade design solutions can be built by a wide range of appropriately skilled specialist contractors, to mitigate risk and ensure best value Cost, and the need to ensure that all criteria are aligned to maintain the commercial viability of the scheme

Energy Performance The link between building envelope performance and its energy consumption in use is reflected by allowable CO2 emissions (under Building Regulations Approved Document Part L2) from the building’s mechanical plant. In order to keep within the allowable level the heating and cooling (for air-conditioned buildings) loads need to be limited. These limits provide guidance relating to the maximum energy gains and losses through the façade, notably heat loss (U values), management of solar gain (G values) and the reduction of air leakage rates. Thus a co-ordinated approach to design of the services and building envelope from the outset of the design process should be seen as a pre-requisite. The performance of the building envelope must be capable of reacting to seasonal climatic conditions. In winter months, solar gain might be considered to be of benefit by providing passive solar heating, whereas in summer months solar gain (G values) should be controlled to prevent overheating and discomfort to building users. This is particularly important for the majority of ‘sealed box’ office developments in city centres, where floor spaces are cooled for the majority of the year, driven by increasingly high occupancy levels, computers and artificial lighting. Thermal performance (U values) should be balanced to prevent condensation and low surface temperatures, which can cause discomfort by radiant cooling or by creating cold down-draughts. This can be of particular concern for facades with large glazed areas. The U value should also ensure that external heat transference to the inside is reduced and conversely any internal heated air is not trapped inside, which could impact upon cooling loads. Therefore, a key deliverable in the building envelope design is solar control, which can be achieved by a variety of solutions, ranging from cost effective high performance coatings on the glass, aided by potentially increased height insulated spandrel panels, possible further increase in solidity, again potentially cost effective, to solutions which attract higher cost premiums, notably external brise soleil (shading) or ventilated cavity curtain walling with motorised solar control blinds. All options have their own idiosyncratic pros and cons, in terms of capital and operating costs, plus associated risks. The building envelope ‘zone’ depth can be affected by a range of issues, including excessive floor spans (dynamic wind pressure), introduction of external brise soleil (shading) and tolerance/vertical alignment of the system solution

Façade Systems

39

relative to slab edge. A large amount of commercial office building comprise curtain walling solutions, often unitised (prefabricated), which are set outbound of the primary structure and which thus maximise net floor area. Adjustable external shading is considered to be more energy efficient compared to the relative inflexibility of fixed shading systems, however these solutions attract cost premiums from both an initial capital cost and potentially operating cost perspective, exacerbated by the increase in façade zone depth (reduction in net floor area). Where external shading is deemed to be necessary for attaining calculated solar control, value engineered building envelope designs often entail fixed shading solutions. These comprise horizontal fins for south facing elevations to combat high angle sun and vertical fins for east and west orientation to accommodate lower angle sun paths. Clearly the effectiveness of fixed shading is reduced compared to adjustable or motorised blinds within a ventilated cavity system or possibly within double glazed units, and so it is common to utilise glass with high performance coating to supplement solar control performance of the fixed shading solution. In addition to attracting a cost premium, the following issues also need to be considered when considering possible external shading solutions;     

Dictating architecture Potential reduced day light transmittance (exacerbated during inclement weather) Reduced accessibility to glass for cleaning and glass replacement Damage risk by cleaning cradles Necessity to clean shading frequently to prevent invalidation of warranty (for coated or anodised finishes).

Elevations orientated due north do not generally require solar control measures, which potentially enables more cost effective building envelope solutions to be adopted, thus assisting in reducing the building envelope global average cost, which enhances the commercial viability of a scheme. The Impact of Different M&E Solutions on the Building Envelope The table used in the cost model below lists four common generic air conditioning solutions, each of which places more onerous performance requirements upon the building envelope solution. Each of the systems has a maximum cooling output relative to the performance of the plant and equipment that comprise the system. Taking the internally generated heat gains out of the system capacity, such as those from lighting, smallpower and occupants, leaves the remainder to deal with the solar gain and so this dictates how hard the façade has to work in reducing this heat gain to a level that the air conditioning system can satisfactorily deal with. This could equally result in an expensive high performing glazed façade or alternatively one with smaller windows and a more heavyweight structure. Whilst this may be considered an oversimplification, it does essentially describe the process. Cost Model In order to evaluate the performance of different types of building envelope solutions pertinent to the variety of airconditioning systems in a commercial office building, target solar gains have been set relative to the different systems in terms of W/m of façade that each air-conditioning system is capable of accommodating in terms of its output. These are summarised in Table 1 below. The figures are derived from the typical available steady-state capacity of each air-conditioning system being considered. Internal gains for occupants, lighting and small power are first subtracted based on BCO guideline figures and assuming no daylight control on lighting. An allowance for fabric/infiltration is also subtracted, leaving a net available system capacity for absorbing solar gain into the space. This solar gain capability is then translated into an allowable solar gain expressed as W/linear metre of facade, based on a typical perimeter office. This enables the figures to be independent of facade height or glazing area.

40

Façade Systems

The G-values (which can be defined as the coefficient of permeability of total solar radiation energy) are then derived by taking a typical incident solar radiation value on a 2.6m high facade panel and calculating the percentage of this energy that may be transmitted into the space to meet the solar gains per metre of facade set by the first process. Table 1 Item

W/m of Facade

G Value

Height

System

1 2 3 4

100 200 300 400

0.05 0.10 0.15 0.20

2.6 2.6 2.6 2.6

Passive chilled beams or displacement systems Active chilled beams Low capacity fan coil units or all air system High capacity fan coil units but with poorer building energy performance

In terms of the cost model, Table 2 details the façade solutions that are proposed for each system that can satisfy the criteria outlined in Table 1, ranging in cost and specification. It assumes a typical 1.5m module width unitised curtain walling solution for a storey height of 3.8m and with a vision glass area of 1.5m wide x 2.6m high, in line with the Table 1 above. This assumes a 1.2m high solid spandrel panel. The table demonstrates how the variety of G values are achievable with different building envelope solutions, based on a variation on theme from a base unitised ‘chassis’ solution, taking performance, architectural intent and cost into consideration. The building envelope solutions adopted in the table are generic for the purpose of this article, but are representative of typical solutions for commercial office buildings. Clearly there are a variety of sub types, which could impact upon cost, architectural intent, buildability efficiency, net floor area, etc., all as covered above. It can be seen that different façade solutions can satisfy the set performance criteria, ranging from the cost effective to the relatively high cost, depending on the criteria that are called for. Similarly, the same solutions may, in some cases, be appropriate for more than one air conditioning system.

Façade Systems

41

Table 2 Description A

Unitised curtain wall, high performance (HP) coated glass sealed units with G value of 0.25, solid spandrel panels

Cost/m2 Façade £650/m²

Comments Based on table above, this solution will not achieve compliance and will require additional solar control measures

A1 Unitised curtain wall, as described in A, but 50% solid panels in addition to spandrel panels

£750/m²

This option should be capable of achieving G values of 0.15 and 0.20, possibly with less dark HP glass, thus cost effective

A2 Unitised curtain wall, as described in A, but with external brise soleil (horizontal blades to south, vertical to east and west)

£800/m²

This option should be capable of achieving G values of 0.15 and 0.20, possibly with less dark HP glass, thus cost effective

A3 Unitised curtain wall, as described in A2 but with greater density of brise soleil for improved solar shading

£850/m²

This option should be capable of accommodating a G value of 0.10, including HP glass

£1100/m²

This option comprises motorised Venetian blinds within cavity, which requires electrical and BMS supply. For a 3.8m storey height and no spandrels this solution should achieve a minimum G value of 0.10 with blinds closed

B

Unitised externally ventilated cavity double wall façade, with cavity depth circa 100mm. This solution does not require mechanically conditioned air within the cavity. Wider walk-in cavity facades attract significant cost premiums

Conclusion The above demonstrates how cost effective façade solutions could be possible for buildings, and recognises the significant cost premium associated with upgrading to more complex solutions. Achieving current Part L, and indeed the next iteration of Part L of the Building Regulations and producing energy efficient commercial buildings, may mean a shift away from the iconic highly glazed facade to more opaque, perhaps more heavyweight buildings, with greater attention to architectural detailing. Developers and occupiers are increasingly recognising the advantage of lower energy buildings with higher BREEAM ratings, of which the fabric plays a key part. This contributes to supporting corporate environmental policies, potentially attracting favourable funding terms, whilst facilitating lower cost in use.

Typical Engineering Details

In addition to the Engineering Features, Typical Engineering Details are included. These are indicative schematics to assist in the compilation of costing exercises. The user should note that these are only examples and cannot be construed to reflect the design for each and every situation. They are merely provided to assist the user with gaining an understanding of the Engineering concepts and elements making up such. ELECTRICAL 

Urban Network Mainly Underground



Urban Network Mainly Underground with Reinforcement



Urban Network Mainly Underground with Substation Reinforcement



Typical Simple 11kV Network Connection For LV Intakes Up To 1000kVA



Typical 11kV Network Connections For HV Intakes 1000kVA To 6000kVA



Static UPS System – Simplified Single Line Schematic For a Single Module



Typical Data Transmission (Structured Cabling)



Typical Networked Lighting Control System



Typical Standby Power System, Single Line Schematic



Typical Fire Detection and Alarm Schematic



Typical Block Diagram – Access Control System (ACS)



Typical Block Diagram – Intruder Detection System (IDS)



Typical Block Diagram – Digital CCTV

MECHANICAL 

BMS Controls For Low Pressure Hot Water (LPHW)



BMS Controls For Primary Chillers and Chilled Water



Fan Coil Unit System



Displacement System



Chilled Ceiling System (Passive System)



Chilled Beam System (Passive System)



Variable Air Volume (VAV)



Variable Refrigerant Volume System (VRV)



Alternative All Air System (FGU)



Reverse cycle heat pump

44

Typical Engineering Details

Urban Network Mainly Underground Details: Connection to small housing development 10 houses, 60m of LV cable from local 11/LV substation route in footpath and verge, 10m of service cable to each plot in verge Supply Capacity: 200kVA Connection Voltage: LV Nr of Phases: 1Φ Breakdown of Detailed Cost Information Labour Cable Jointing Switchgear Termination Transformer Trench/Reinstate OHL LV OHL HV Other Special / One-offs Total Calculated Price

Plant

Materials

Overheads

Total £1,923 £3,236 £754 £3,814 £9,727

£233 £1,567 £371 £989 -

£109 £398 £94 £596 -

£ 1,153 £555 £122 £1,127 -

£428 £716 £167 £1,102 -

£3,160

£1,197

£2,957

£2,413

Non-contestable Elements and Associated Charges ranges between 15-20% Total Non-contestable Elements and Associated Charges Grand Total Calculated Price excl. VAT

£1,459 – £1,945 £11,186 – £11,672

Typical Engineering Details

45

Urban Network Mainly Underground with Reinforcement Details: Connection to small housing development 10 houses, 60m of LV cable from local 11/LV substation route in footpath and verge, 10m of service cable to each plot in verge. Scheme includes reinforcement of LV distribution board Supply Capacity: 200kVA Connection Voltage: LV Nr of Phases: 1Φ Breakdown of Detailed Cost Information Labour Cable Jointing Switchgear Termination Transformer Trench/Reinstate OHL LV OHL HV Other Special / One-offs Total Calculated Price

Plant

Materials

Overheads

Total £1,923 £3,236 £6,420 £754 £3,814 £16,146

£233 £1,567 £1,808 £371 £989 -

£109 £398 £574 £94 £596 -

£1,153 £555 £2,613 £122 £1,127 -

£428 £716 £1,425 £167 £1,102 -

£4,968

£1,771

£5,570

£3,838

Non-contestable Elements and Associated Charges ranges between 15-20% Total Non-contestable Elements and Associated Charges Grand Total Calculated Price excl. VAT

£2,422–£3,229 £18,568–£19,375

46

Typical Engineering Details

Urban Network Mainly Underground with Substation Reinforcement Details: Connection to small housing development 10 houses, 60m of LV cable from local 11/LV substation route in footpath and verge, 10m of service cable to each plot in verge. Scheme includes reinforcement of LV distribution board and new substation and 20m of HV cable Supply Capacity: 200kVA Connection Voltage: LV Nr of Phases: 1Φ Breakdown of Detailed Cost Information Labour Cable Jointing Switchgear Termination Transformer Trench/Reinstate OHL LV OHL HV Other Special / One-offs Total Calculated Price

Plant

Materials

Overheads

£276 £1,866 £5,537 £611 £2,844 £1,536 -

£129 £474 £1,757 £155 £902 £1,005 -

£1,599 £783 £15,488 £306 £7,725 £1,926 -

£573 £888 £6,509 £305 £3,277 £1,815 -

£12,669

£4,422

£27,827

£13,367

Total £2,576 £4011 £29,291 £1,377 £14,748 £6,282 £58,285

Non-contestable Elements and Associated Charges ranges between 15-20% Total Non-contestable Elements and Associated Charges

£8,743–£11,657

Grand Total Calculated Price excl. VAT

£67,028–£69,942

×

×

×

×

×

DNO 11kV network

DNO ring main unit (RMU)

DNO transformer (typically oil-filled, 500 to 1000kVA, 11kV/400V

DNO metering air circuit breaker (ACB)

Client LV Intake Switchboard (400V)

Typical Simple 11kV Network Connection For LV Intakes Up To 1000kVA

Note: * DNO – Distribution Network Operator

DNO* Demise

Client Demise

×

×

×

×

×

× ×

×

×

×

×

× ×

×

×

×

×

×

×

DNO 11kV network

DNO metering circuit breakers

Client's HV intake switchboard (11kV)

Client's transformers (typically cast resin, 1000kVA to 3200kVA, 11kV/400V)

Client's Substation/LV switchboard

Typical 11kV Network Connections For HV Intakes 1000kVA To 6000kVA

Note: * DNO – Distribution Network Operator

DNO* Demise

Client Demise

×

UPS Input Switchgear

×

Mains

Rectifier

× Battery

Inverter

Internal Bypass

External Bypass

Static Switch

×

UPS Output

UPS Output Switchgear

×

×

Static UPS System – Simplified Single Line Schematic For a Single Module

×

×

Basement

Ground Floor

1st Floor

Other Floors

Typical Data Transmission (Structured Cabling)

IT Cabinet c/w Frame & Patch Panels

Floor boxes or grommets

Raised Modular Floor

Horizontal Flood Wiring (Cat 6)

Main Equipment Room

Sub Equipment Room

Vertical Backbone e (Fibre)

Lighting Control Module (normally above ceiling)

Field Bus Cable 2

Typical Networked Lighting Control System

2 inputs from over ride devices

230V

Further LCMs

Field Bus Cable 3

Up to 9 addressable outputs to individual luminaires or groups

Field Bus Cable 1

230V

2 inputs from over ride devices

Central Supervisor (Optional)

Spine Bus

Area Controller (normally in electrical riser)

To further Area Controllers

×

×

×

× × Diesel Standby Generator

×

× × ×

Life-Safety Loads (Essential)

'Short Break' 'Short-Break' Switchboard

** UPS System

'No-Break' Switchboard

Typical Standby Power System, Single Line Schematic

Note: * DNO – Distribution Network Operator ** UPS – Uninterruptible Power Supply

DNO* 11kV Switchgear

11kV / 400V Transformer

×

Normal Loads (Non-essential)

× ××

Critical Loads (IT, Computers)

230V

Further Loops

Modem for Remote Monitoring

Typical Fire Detection and Alarm Schematic

Interface Units: Motor Control Centres, Access Control, Lifts etc.

Analogue Addressable Control Panel

Call-points Detectors

Detector Loop No. 1

Fireman's Ventilation Control Panel

Repeater Panel(s)

Sounder Loop No. 1

Intercom Unit

RJ45

Ethernet

230 V

Controlled Door, Magnetic Lock, BGU and Proximity Reader

Reader Module

Reader Module

RJ45

Controlled Barrier and Vehicle Induction loop, Proximity Reader, Intercom

230 V

Reader Field Network

Fire shutdown loop input/output unit (IOU)

Typical Block Diagram – Access Control System (ACS)

Reader Module

230 V Reader Module

230 V

Access Controller

RJ45

Ethernet Network

230 V

230 V

Multi-zone Control Panel including keypad and battery back-up

Passive Infrared (PIR) and volumetric detectors

Typical block diagram – Intruder Detection System (IDS)

Final exit set button

Vibration detectors

Contact loops for doors and windows

Personal attack buttons

Remote Keypad

I Internal l loudspeaker l d k

External sounder

Automatic Number Plate Recognition

Detectors (PIRs)

Sounders/speakers

Internal Cameras

External Cameras

WAN

Keyboard

Mouse

Keyboard/mouse Extender

Monitor

Network Switch

Keyboard

Mouse

Monitor

Typical Block Diagram – Digital CCTV

UPS

Keyboard/ mouse switch

Server

PC 1

Multi Channel Digital Video Recorder

Microphone

Remote workstation

Digital outputs

Digital inputs

Analogue outputs

Analogue inputs

From Primary LPHW HWS Boiler Inverters

Pumps

BMS Controls For Low Pressure Hot Water (LPHW)

Differential Pressure Sensor

Strainer

Temperature Sensor

Secondary HWS

Differential Pressure Sensor

Digital outputs

Digital inputs

Analogue outputs

Primary Chilled Water Pumps

Temperature S Sensor

Pressurisation Unit

Temperature Sensor

BMS Controls For Primary Chillers and Chilled Water

Storage Tanks

Chiller No.2

Analogue inputs

Chiller No.1

Differential Pressure Sensor

False ceiling

Fan coil unit

Optional electrical heater battery at fan coil in lieu of hot water coil

Boiler

Fan Coil Unit System

Condensate drain to waste

Extract fan

Chiller

Supply air handling unit

Heat rejection to atmosphere (equipment i.e. cooling tower, dry air cooler, condenser unit etc.)

Perimeter heating

False ceiling

Boiler

Raised floor

E tract air Extract

Displacement System

(Fan coil units may be required subject to heating/cooling loads or radiant heating)

Grilles

Grilles

Chiller

Air handling unit

Fresh air plus conditioned air volume

Heat rejection to atmosphere (equipment i.e. cooling tower, dry air cooler, condenser unit etc.)

Perimeter heating

Ceiling panel

Boiler

Raised floor

Extract grille

Chilled Ceiling System (Passive System)

Supply grille

Chiller

Air handling unit

Primary fresh air volume

Heat rejection to atmosphere (equipment i.e. cooling tower, dry air cooler, condenser unit etc.)

Extract grille

Raised floor

Chilled beams

Supply grille

Chiller

Air handling unit

Chilled Beam System (Passive System) Active Option Connects Air Supply Duct To Chilled Beams & Deletes Supply Grilles

Perimeter heating

Boiler

Primary fresh air volume

Heat rejection to atmosphere (equipment i.e. cooling tower, dry air cooler, condenser unit etc.)

L.F.

Perimeter heating

Boiler

L.F. Supply grille

Damper

L.F.

Optional fan (FAT VAV)

Variable Air Volume (VAV)

Raised floor

Extract grille

Optional heater

Terminal unit

Chiller

Air handling unit

Primary fresh air volume

Heat rejection to atmosphere (equipment i.e. cooling tower, dry air cooler, condenser unit etc.)

Boiler

False ceiling

Fan coil unit

Refrigeration pipework

Condensate drain to waste

Condenser unit for AHU cooling

Air volume duty to match supply AHU

Fresh air only

Heat rejection to atmosphere (equipment i.e. cooling tower, dry air cooler, condenser unit etc.)

Supply air handling unit

Alternative chiller for AHU cooling

Variable Refrigerant Volume System (VRV)

Option 3 pipe VRV to Condenser unit give heat pump for AHU cooling principle

Fan/Grille unit

Grille

Return air duct

Alternative All Air System (FGU)

Future cellular office

Grille

False ceiling

Fan/Grille unit

Supply air duct

Option for heat pump units to perimeter wall

Boiler

False ceiling

Heat pump unit Condensate drain

Reverse Cycle Heat Pump

Compressor

Constant temperature condenser pipework

(Optional) Cooling tower dry air cooler Package chiller for AHU DX unit

PART TWO

Approximate Estimating

Directions, page 69 Cost Indices, page 70 RIBA Stage A Feasibility Costs, page 73 RIBA Stage C Elemental Rates, page 78 All-In-Rates, page 85 Elemental Costs, page 101

Approximate Estimating

69

DIRECTIONS

The prices shown in this section of the book are average prices on a fixed price basis for typical buildings tendered during the second quarter of 2009. Unless otherwise noted, they exclude external services and professional fees. The information in this section has been arranged to follow more closely the order in which estimates may be developed, in accordance with the RIBA stages of work; a)

Cost Indices and Regional Variations – These provide information regarding the adjustments to be made to estimates taking into account current pricing levels for different locations in the UK.

b)

Feasibility Costs – These provide a range of data (based on a rate per square metre) for all-in engineering costs, excluding lifts, associated with a wide variety of building types. These would typically be used at work stage A/B (feasibility) of a project.

c)

Elemental Rates – The outline costs for offices have been developed further to provide rates for the alternative solutions for each of the services elements. These would typically be used at work stage C, outline proposal. Where applicable, costs have been identified as Shell and Core and Fit Out to reflect projects where the choice of procurement has dictated that the project is divided into two distinctive contractual parts. Such detail would typically be required at work stage D, detailed proposals.

d)

All-in-Rates – These are provided for a number of items and complete parts of a system i.e. boiler plant, ductwork, pipework, electrical switchgear and small power distribution, together with lifts and escalators. Refer to the relevant section for further guidance notes.

e)

Elemental Costs – These are provided for a diverse range of building types; offices, laboratory, shopping mall, airport terminal building, supermarket, performing arts centre, sports hall, luxury hotel, hospital and secondary school. Also included is a separate analysis of a building management system for an office block. In each case, a full analysis of engineering services costs is given to show the division between all elements and their relative costs to the total building area. A regional variation factor has been applied to bring these analyses to a common London base.

Prices should be applied to the total floor area of all storeys of the building under consideration. The area should be measured between the external walls without deduction for internal walls and staircases/lift shafts i.e. GIA (Gross Internal Area). Although prices are reviewed in the light of recent tenders it has only been possible to provide a range of prices for each building type. This should serve to emphasise that these can only be average prices for typical requirements and that such prices can vary widely depending on variations in size, location, phasing, specification, site conditions, procurement route, programme, market conditions and net to gross area efficiencies. Rates per square metre should not therefore be used indiscriminately and each case needs to be assessed on its own merits. The prices do not include for incidental builder's work nor for profit and attendance by a Main Contractor where the work is executed as a subcontract: they do however include for preliminaries, profit and overheads for the services contractor. Capital contributions to statutory authorities and public undertakings and the cost of work carried out by them have been excluded. Where services works are procured indirectly, i.e. ductwork via a mechanical Subcontractor, the reader should make due allowance for the addition of a further level of profit etc.

70

Approximate Estimating COST INDICES

The following tables reflect the major changes in cost to contractors but do not necessarily reflect changes in tender levels. In addition to changes in labour and materials costs, tenders are affected by other factors such as the degree of competition in the particular industry, the area where the work is to be carried out, the availability of labour and the prevailing economic conditions. This has meant in recent years that, when there has been an abundance of work, tender levels have tended to increase at a greater rate than can be accounted for solely by increases in basic labour and material costs and, conversely, when there is a shortage of work this has tended to result in keener tenders. Allowances for these factors are impossible to assess on a general basis and can only be based on experience and knowledge of the particular circumstances. In compiling the tables the cost of labour has been calculated on the basis of a notional gang as set out elsewhere in the book. The proportion of labour to materials has been assumed as follows: Mechanical Services – 30:70, Electrical Services – 50:50, (1976 = 100) Mechanical Services Year First Quarter

Second Quarter

Third Quarter

Fourth Quarter

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010

368 384 401 411 443 458 486 513 535 555 581P 600F

363 386 401 411 446 464 487 522 541 560 580F 601F

370 388 405 410 447 467 492 527 546 567 580F 603F

384 400 411 442 456 482 508 533 555 584 598F 614F

Electrical Services Year

First Quarter

Second Quarter

Third Quarter

Fourth Quarter

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010

433 458 485 508 530 571 607 631 665 693 721F 754F

432 464 484 508 533 574 608 636 666 697 720F 754F

431 465 484 508 533 576 607 641 668 700 721F 755F

446 468 487 513 541 589 615 649 676 710 734F 766F

(P = Provisional) (F = Forecast)

Approximate Estimating

71

COST INDICES

Regional Variations Prices throughout this Book apply to work in the London area (see Directions at the beginning of the Mechanical Installations and Electrical Installations sections). However, prices for mechanical and electrical services installations will of course vary from region to region, largely as a result of differing labour costs but also depending on the degree of accessibility, urbanisation and local market conditions. The following table of regional factors is intended to provide readers with indicative adjustments that may be made to the prices in the Book for locations outside of London. The figures are of necessity averages for regions and further adjustments should be considered for city centre or very isolated locations, or other known local factors. Greater London South East South West East Midlands West Midlands East Anglia

1.03 0.93 0.90 0.85 0.86 0.87

Yorkshire & Humberside North West North East Scotland Wales Northern Ireland

0.87 0.85 0.88 0.93 0.90 0.72

72

Approximate Estimating COST INDICES

Scotland 0.93

North East 0.88

Northern Ireland 0.72

Yorkshire and Humberside 0.87 North West 0.85 East Midlands 0.85 Wales 0.90

West Midlands 0.86

East Anglia 0.87

South East (excluding London) 0.93 South West 0.90

Greater London 1.03

Approximate Estimating

73

RIBA STAGE A FEASIBILITY COSTS

TYPICAL SQUARE METRE RATES FOR ENGINEERING SERVICES The following examples indicate the range of rates within each building type for engineering services, excluding lifts etc., utilities services and professional fees. Based on Gross Internal Area (GIA). Industrial Buildings

£/m2 GIA

Factories Owner occupation: Includes for rainwater, soil/waste, LTHW heating via HL radiant heaters, BMS, LV installations, lighting, fire alarms, security, earthing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

120

Owner occupation: Includes for rainwater, soil/waste, sprinklers, LTHW heating via HL radiant heaters, local air conditioning, BMS, HV/LV installations, lighting, fire alarms, security, earthing

180

Warehouses High bay for owner occupation: Includes for rainwater, soil/waste, LTHW heating via HL gas fired heaters, BMS, HV/LV installations, lighting, fire alarms, security, earthing . . . . . . . . . . . . . . . .

95

High bay for owner occupation: Includes for rainwater, soil/waste, sprinklers, LTHW heating via HL radiant heaters, local air conditioning, BMS, HV/LV installations, lighting, fire alarms, security, earthing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

195

Distribution centres High bay for letting: Includes for rainwater, soil/waste, LTHW heating via HL gas fired heaters, BMS, HV/LV installations, lighting, fire alarms, security, earthing . . . . . . . . . . . . . . . . . . . . . . .

120

High bay for owner occupation: Includes for rainwater, soil/waste, sprinklers, LTHW heating via HL radiant heaters, local air conditioning, BMS, HV/LV installations, lighting, fire alarms, security

220

Office Buildings 5,000m2 to 15,000m2 Offices for letting Shell & Core and Cat A non air conditioned; Includes for rainwater, soil/waste, cold water, hot water via local electrical heaters, LTHW heating via radiator heaters, toilet extract, controls, LV installations, lighting, small power (landlords), fire alarms, earthing, security & IT wireways. . . .

260

Shell & Core and Cat A non air conditioned; Includes for rainwater, soil/waste, cold water, hot water, LTHW heating via perimeter heaters, toilet extract, controls, LV installations, lighting, small power (landlords), fire alarms, earthing, security wireways, IT wireways. . . . . . . . . . . . . . . . . .

275

Shell & Core and Cat A air conditioned; Includes for rainwater, soil/waste, VRV 3 pipe heat pumps, toilet extract, BMS, LV installations, lighting, small power (landlords), fire alarms, earthing, security & IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

405

Shell & Core and Cat A air conditioned; Includes for rainwater, soil/waste, cold water, hot water via local electrical heaters, LTHW heating via perimeter heaters, 2 pipe , toilet extract, BMS, LV installations, lighting, small power (landlords), fire alarms, earthing, security & IT wireways. . . .

425

Offices for owner occupation Non air conditioned; Includes for rainwater, soil/waste, cold water, hot water via local electrical heaters, dry risers, LTHW heating via radiator heaters, toilet extract, controls, LV installations, lighting, small power (landlords), fire alarms, earthing, security, IT wireways . . . . . . . . . . . . . .

295

74

Approximate Estimating RIBA STAGE A FEASIBILITY COSTS

TYPICAL SQUARE METRE RATES FOR ENGINEERING SERVICES Office Buildings – cont’d Offices for owner occupation – cont’d

£/m2 GIA

Non air conditioned; Includes for rainwater, soil/waste, cold water, hot water, dry risers, LTHW heating via perimeter heaters, toilet extract, BMS, LV installations, lighting, small power (landlords), fire alarms, earthing, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

305

Air conditioned; Includes for rainwater, soil/waste, cold water, hot water via local electrical heaters, dry risers, LTHW heating via perimeter heating, 4 pipe air conditioning, toilet extract, kitchen extract, sprinkler protection, BMS, LV installations, life safety standby generators, lighting, small power, fire alarms, earthing, security, IT wireways small power, fire alarms L1/P1, earthing, security, and IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

475

Health and Welfare Facilities District general hospitals Natural ventilation Includes for rainwater, soil/waste, cold water, hot water, dry risers, medical gases, LTHW heating via perimeter heating, toilet extract, kitchen extract, BMS, LV installations, standby generation, lighting, small power, fire alarms, earthing/lightning protection, nurse call systems, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

440

Natural ventilation Includes for rainwater, soil/waste, cold water, hot water, dry risers, LTHW heating via perimeter heaters, localised VAV air conditioning, kitchen/toilet extract, BMS, LV installations, standby generation, lighting, small power, fire alarms, earthing/lightning protection, nurse call systems, security, IT wireways. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

620

Private hospitals Air conditioned; Includes for rainwater, soil/waste, cold water, hot water, dry risers, medical gases, LTHW heating, 2 pipe air conditioning, toilet extract, kitchen extract, BMS, LV installations, standby generation, lighting, small power, fire alarms, earthing, nurse call systems, nurse call system, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

700

Air conditioned; Includes for rainwater, soil/waste, cold water, hot water, dry risers, medical gases, LTHW heating , 4 pipe air conditioning, kitchen/toilet extract, BMS, LV installations, standby generation, lighting, small power, fire alarms, earthing, nurse call system, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

750

Day care unit Natural ventilation; Includes for rainwater, soil/waste, cold water, hot water via local electrical heaters, medical gases, LTHW heating, toilet extract, kitchen extract, BMS, LV installations, lighting, small power, fire alarms , earthing, security, IT wireways . . . . . . . . . . . . . . . . . . . . . .

465

Comfort cooled; Includes for rainwater, soil/waste, cold water, hot water, medical gases, LTHW heating, DX air conditioning, kitchen/toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, security, IT wireways. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

500

Approximate Estimating

75

RIBA STAGE A FEASIBILITY COSTS

TYPICAL SQUARE METRE RATES FOR ENGINEERING SERVICES – cont’d Entertainment and Recreation Buildings

£/m2 GIA

Non performing Natural Ventilation; Includes for rainwater, soil/waste, cold water, central hot water, dry risers, LTHW heating, toilet extract, kitchen extract, controls, LV installations, lighting, small power, fire alarms, earthing, security, IT wireways. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

335

Comfort cooled; Includes for rainwater, soil/waste, cold water, hot water via local electrical heaters sprinklers/dry risers, LTHW heating , DX air conditioning, kitchen/toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, security, IT wireways . . . . . . . . . . . . .

525

Performing arts (with theatre) Natural Ventilation; Includes for rainwater, soil/waste, cold water, central hot water, sprinklers/dry risers, LTHW heating, toilet extract, kitchen extract, controls, LV installations, lighting, small power, fire alarms, earthing, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

550

Comfort Cooled; Includes for rainwater, soil/waste, cold water, central hot water, sprinklers/dry risers, LTHW heating, DX air conditioning, kitchen/toilet extract, BMS, LV installations, lighting including enhanced dimming/scene setting, small power, fire alarms, earthing, security, IT wireways including for production, audio and video recording, EPOS system. . . . . . . . . . . . . .

665

Sports halls Natural ventilation; Includes for rainwater, soil/waste, cold water, hot water gas fired heaters, LTHW heating, toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200

Comfort Cooled; Includes for rainwater, soil/waste, cold water, hot water via LTHW heat exchangers, LTHW heating, air conditioning via AHU’s, toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

300

Multi purpose leisure centre Natural ventilation; Includes for rainwater, soil/waste, cold water, hot water gas fired heaters, LTHW heating, toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

300

Comfort cooled; Includes for rainwater, soil/waste, cold water, hot water LTHW heat exchangers, LTHW heating, air conditioning via AHU, pool hall supply/extract, kitchen/toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, security, IT wireways . . . . . . . . . . . . .

405

Retail Buildings Open arcade Natural ventilation; Includes for rainwater, soil/waste, cold water, hot water, sprinklers/dry risers, LTHW heating, toilet extract, smoke extract, BMS, LV installations, life safety standby generators, lighting, small power, fire alarms, public address, earthing/lightning protection, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

315

76

Approximate Estimating RIBA STAGE A FEASIBILITY COSTS

TYPICAL SQUARE METRE RATES FOR ENGINEERING SERVICES – cont’d Retail Buildings – cont’d

£/m2 GIA

Enclosed shopping mall Air conditioned; Includes for rainwater, soil/waste, cold water, hot water, sprinklers/dry risers, LTHW heating, air conditioning via AHU’s, toilet extract, smoke extract, BMS, LV installations, life safety standby generators, lighting, small power, fire alarms, public address, earthing/lightning protection, CCTV/security, IT wireways people counting systems . . . . . . . . . . . . . . . . . . . . . .

510

Department stores Air conditioned; Includes for sanitaryware, soil/waste, cold water, hot water, sprinklers/dry risers, LTHW heating, air conditioning via AHU’s, toilet extract, smoke extract, BMS, LV installations, life safety standby generators, lighting, small power, fire alarms, public address, earthing, lightning protection, CCTV/security, IT installation wireways. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

375

Supermarkets Air conditioned; Includes for rainwater, soil/waste, cold water, hot water, sprinklers, LTHW heating, air conditioning via AHU’s, toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, lightning protection, security, IT wireways, refrigeration . . . . . . . . . . . . . . . . .

575

Secondary Schools (Academy) Natural Ventilation; Includes for rainwater, soil/waste, cold water, central hot water, LTHW heating, toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

325

Natural vent with comfort cooling to selected areas (BB93 compliant); Includes for rainwater, soil/ waste, cold water, central hot water, LTHW heating, DX air conditioning, general supply/extract, toilet extract, BMS, LV installations, lighting, small power, fire alarms, earthing, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

400

Scientific Buildings Educational research Comfort cooled; Includes for rainwater, soil/waste, cold water, central hot water, dry risers, compressed air, medical gases, LTHW heating, 4 pipe air conditioning, toilet extract, fume, BMS, LV installations, lighting, small power, fire alarms, earthing, lightning protection, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

760

Air conditioned; Includes for rainwater, soil/waste, laboratory waste, cold water, central hot water, specialist water, dry risers, compressed air, medical gases, steam, LTHW heating, VAV air conditioning, Comm’s room cooling, toilet extract, fume extract, BMS, LV installations, UPS, standby generators, lighting, small power, fire alarms, earthing, lightning protection, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1240

Commercial research Air conditioned; Includes for rainwater, soil/waste, laboratory waste, cold water, central hot water, specialist water, dry risers, compressed air, medical gases, steam, LTHW heating, VAV air conditioning, Comm room cooling, toilet extract, fume extract, BMS, LV installations, UPS, standby generators, lighting, small power, fire alarms, earthing, lightning protection, security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1240

Approximate Estimating

77

RIBA STAGE A FEASIBILITY COSTS

TYPICAL SQUARE METRE RATES FOR ENGINEERING SERVICES – cont’d Hotels

£/m2 GIA

1 to 3 Star; Includes for rainwater, soil/waste, cold water, hot water, dry risers, LTHW heating via radiators, toilet/bathroom extract, kitchen extract, BMS, LV installations, lighting, small power, fire alarms, earthing, lightning protection security, IT wireways . . . . . . . . . . . . . . . . . . . . . . . . . . .

350 to 550

4 to 5 Star; Includes for rainwater, soil/waste, cold water, hot water, sprinklers, dry risers, 4 pipe air conditioning, kitchen extract, toilet/bathroom extract, BMS, LV installations, life safety standby generators, lighting, small power, fire alarms, earthing, security, IT wireways . . . . . . . . . . . . . .

750 to 850

78

Approximate Estimating RIBA STAGE C ELEMENTAL RATES

ELEMENTAL RATES FOR ALTERNATIVE ENGINEERING SERVICES SOLUTIONS The following examples of building types indicate the range of rates for alternative design solutions for each of the engineering services elements based on Gross Internal Area for the Shell and Core and Net Internal Area for the Fit Out. Fit Out is assumed to be to Cat A standard. Consideration should be made for the size of the building, which may affect the economies of scale for rates i.e. the larger the building the lower the rates. OFFICES MECHANICAL SERVICES

Shell & Core £/m² GIA

Fit Out £/m² NIA

Sanitaryware Building up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 to 10 Building over 3,000m² to 15,000m² (low rise) . . . . . . . . . . . . . . . . . . . . . . . . 6 to 9

-

Disposal installation Building up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 25 Building over 3,000m² to 15,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 20

-

Water installation Building up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 25 Building over 3,000m² to 15,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 25

-

LPHW Heating Installation; including gas installations Building up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 to 45 Building over 3,000m² to 15,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 to 45

35 to 45 25 to 35

Air Conditioning; including ventilation Comfort Cooling; 2 pipe fan coil for building up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 to 70 2 pipe fan coil for building over 3,000m² to 15,000m² . . . . . . . . . . . . . . . . . . 50 to 65 2 pipe variable refrigerant volume (VRV) for building up to 3,000m² . . . . . . . . 40 to 50

90 to 100 85 to 95 60 to 75

Full air conditioning; 4 Pipe fan coil for building up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . 4 Pipe fan coil for building over 3,000m² to 15,000m² . . . . . . . . . . . . . . 3 pipe variable refrigerant volume for building up to 3,000m² . . . . . . . . . Ventilated (active) chilled beams for building over 3,000m² to 15,000m² . Chilled beam exposed services for building over 3,000m² to 15,000m². . Concealed passive chilled beams for building over 3,000m to 15,000m² Chilled ceiling for building over 3,000m² to 15,000m² . . . . . . . . . . . . . . Chilled ceiling/perimeter beams for building over 3,000m² to 15,000m². . Displacement for building over 3,000m² to 15,000m². . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

80 80 70 80 80 80 80 80 80

to to to to to to to to to

100 100 80 110 110 110 110 110 95

135 to 155 115 to 135 115 to 125 135 to 145 225 to 245 125 to 135 215 to 225 235 to 255 75 to 95

Approximate Estimating

79

RIBA STAGE C ELEMENTAL RATES

ELEMENTAL RATES FOR ALTERNATIVE ENGINEERING SERVICES SOLUTIONS – cont’d OFFICES MECHANICAL SERVICES – cont’d

Shell & Core £/m² GIA

Fit Out £/m² NIA

Ventilation systems (excluding smoke extract) Building up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 40 Building over 3,000m² to 15,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 35

-

Fire Protection over 3,000 m² to 15,000m² Dry risers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 to 5 Sprinkler installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30

25 to 30

BMS Controls: including MCC panels and control cabling Full air conditioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30

20 to 25

80

Approximate Estimating RIBA STAGE C ELEMENTAL RATES

ELEMENTAL RATES FOR ALTERNATIVE ENGINEERING SERVICES SOLUTIONS – cont’d OFFICES ELECTRICAL SERVICES

Shell & Core £/m² GIA

Fit Out £/m² NIA

LV Installations Standby generators (life safety only) Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 15

-

LV distribution Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 35 Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 45

-

Lighting Installations (including lighting controls and luminaries) Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 20 Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 20

40 to 60 50 to 70

Small Power Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 to 8 Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 to 6

-

Protective Installations Earthing Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 to 3 Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 to 3

1 to 2 1 to 2

Lightning Protection Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 to 4 Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 to 3

-

Communication Installations Fire Alarms (single stage) Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 to 10 Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 12

10 to 15 10 to 15

Fire Alarms (phased evacuation) Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 to 15

12 to 18

IT (Wireways only) Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 to 3 Buildings over 3,000m² to 15,000m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 to 3

-

Approximate Estimating

81

RIBA STAGE C ELEMENTAL RATES

ELEMENTAL RATES FOR ALTERNATIVE ENGINEERING SERVICES SOLUTIONS – cont’d OFFICES ELECTRICAL SERVICES – cont’d

Shell & Core £/m² GIA

Fit Out £/m² NIA

Security Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 8 Buildings over 3,000m² to 15,000 m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 10

-

Electrical Installations for Mechanical Plant Buildings up to 3,000m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 8 Buildings over 3,000m² to 15,000 m² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 10

5 to 10

82

Approximate Estimating RIBA STAGE C ELEMENTAL RATES

ELEMENTAL RATES FOR ALTERNATIVE ENGINEERING SERVICES SOLUTIONS – cont’d HOTELS MECHANICAL SERVICES

£/m² GIA

Sanitaryware 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 50 Above ground disposal installation 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 35 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 35 Water installation 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 to 38 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 to 50 LPHW Heating Installation; including gas installations 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 45 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 45 Air Conditioning; including ventilation 2 to 3 Star – 4 pipe Fan coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 to 240 4 to 5 Star – 4 pipe Fan coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 to 240 2 to 3 Star – 3 pipe variable refrigerant volume . . . . . . . . . . . . . . . . . . . . . . 130 to 150 4 to 5 Star – 3 pipe variable refrigerant volume . . . . . . . . . . . . . . . . . . . . . . 130 to 150 Fire Protection 2 to 3 Star – Dry risers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 to 12 4 to 5 Star – Dry risers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 to 12 2 to 3 Star – Sprinkler installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 25 4 to 5 Star – Sprinkler installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30 BMS Controls: including MCC panels and control cabling 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 12 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 35

Approximate Estimating

83

RIBA STAGE C ELEMENTAL RATES

ELEMENTAL RATES FOR ALTERNATIVE ENGINEERING SERVICES SOLUTIONS – cont’d HOTELS ELECTRICAL SERVICES

£/m² GIA

LV Installations Standby generators (life safety only) 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 20 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 20 LV distribution 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 35 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 to 45 Lighting Installations 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 35 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 50 Small Power 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 10 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 15 Protective Installations Earthing 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 2 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 2 Lightning Protection

1 to 2

2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 2 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 2 Communication Installations Fire Alarms 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 20 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 20 IT 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 25 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 25 Security 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 25 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 25 Electrical Installations for Mechanical Plant 2 to 3 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 8 4 to 5 Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 8

84

Approximate Estimating RIBA STAGE C ELEMENTAL RATES

ELEMENTAL RATES FOR ALTERNATIVE ENGINEERING SERVICES SOLUTIONS – cont’d RESIDENTIAL MECHANICAL & ELECTRICAL SERVICES

Shell & Core £/m² GIA

Fit Out £/m² NIA

Sanitaryware and above ground disposal installation Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 5 Private. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 35

0 to 5 50 to 75

Disposal installation Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 15 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 15

15 to 20 9 to 16

Water installation Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 35 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 65

30 to 35 40 to 65

Heat Source Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 15 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 35

10 to 15 0 to 35

Space Heating & Air Treatment Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 10 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 45

40 to 60 150 to 250

Ventilation Affordable to façade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 20 Private (whole house vent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 35

10 to 20 30 to 55

Electrical Installations Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 to 45 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 to 65

45 to 60 80 to 110

Gas Installations Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 5 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 5

5 to 10 0 to 20

Protective Installations Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 35 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 20

10 to 40 0 to 20

Communication Installations Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 35

30 to 45 35 to 60

Special Installations Affordable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 10 Private . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 to 10

10 to 25 5 to 10

Note: The range in cost differs due to the vast diversity in services strategies available. The lower end of the scale reflects all electric schemes (not always be possible due to Part L requirements) or local plant within apartment schemes, such as combi boilers, local ventilation etc. The high end of the scale is based on good quality apartments, which includes comfort cooling, sprinklers, home network installations, video entry, higher quality of sanitaryware and lighting.

Approximate Estimating

85

ALL-IN-RATES

ALL-IN-RATES FOR PRICING MECHANICAL APPROXIMATE QUANTITIES

ABOVE GROUND DRAINAGE Soil and Waste

Cost per Point £ 350–400

WATER INSTALLATIONS Cold Water

350–400

Hot Water

400–450

HEAT SOURCE

Cost Per kW £

Gas fired boilers including gas train and controls

30–35

Gas fired boilers including gas train, controls, flue, Plantroom pipework, valves and insulation, pumps and pressurisation unit

65–120

SPACE HEATING AND AIR TREATMENT

Cost per kW £

CHILLED WATER Air cooled R134a refrigerant chiller including control panel, anti vibration mountings

120–140

Air cooled R134a refrigerant chiller including control panel, anti-vibration mountings, plantroom pipework, valves, insulation, pumps and pressurisation units

200–250

Water cooled R134a refrigerant chiller including control panel, anti vibration mountings

70–90

Water cooled R134a refrigerant chiller including control panel, anti-vibration mountings, plantroom pipework, valves, insulation, pumps and pressurisation units

150–190

Absorption steam medium chiller including control panel, anti-vibration mountings, plantroom pipework, valves, insulation, pumps and pressurisation units

250–350

HEAT REJECTION

Cost per kW (heat rejection) £

Open circuit, forced draft cooling tower

50–70

Closed circuit, forced draft cooling tower

70–80

Dry Air

60–70

PUMPS

Cost per kPa £

Pumps including flexible connections, anti-vibration mountings

13–65

Pumps including flexible connections, anti-vibration mountings, plantroom pipework, valves, insulation and accessories

42–140

86

Approximate Estimating ALL-IN-RATES

ALL-IN-RATES FOR PRICING MECHANICAL APPROXIMATE QUANTITIES – cont’d SPACE HEATING AND AIR TREATMENT – cont’d DUCTWORK The rates below allow for ductwork and for all other labour and material in fabrication, fittings, supports and jointing to equipment, stop and capped ends, elbows, bends, diminishing and transition pieces, regular and reducing couplings, volume control dampers, branch diffuser and 'snap on' grille connections, ties, 'Ys', crossover spigots, etc., turning vanes, regulating dampers, access doors and openings, hand-holes, test holes and covers, blanking plates, flanges, stiffeners, tie rods and all supports and brackets fixed to structure.

Per m2 of duct £

Rectangular galvanised mild steel ductwork as HVCA DW 144 up to 1000mm longest side

50–56

Rectangular galvanised mild steel ductwork as HVCA DW 144 up to 2500mm longest side

56–67

Rectangular galvanised mild steel ductwork as HVCA DW 144 3000mm longest side and above

77–82

Circular galvanised mild steel ductwork as HVCA DW 144

56–78

Flat oval galvanised mild steel ductwork as HVCA DW 144 up to 545mm wide

56–62

Flat oval galvanised mild steel ductwork as HVCA DW 144 up to 880mm wide

64–76

Flat oval galvanised mild steel ductwork as HVCA DW 144 up to 1785mm wide

76–81

PACKAGED AIR HANDLING UNITS Air handling unit including LPHW pre-heater coil, pre-filter panel, LPHW heater coils, chilled water coil, filter panels, inverter drive, motorised volume control dampers, sound attenuation, flexible connections to ductwork and all anti-vibration mountings.

Cost per m3/s £

6,500–8,500

EXTRACT FANS Extract fan including inverter drive, sound attenuation, flexible connections to ductwork and all anti-vibration mountings

1,000–2,000

Approximate Estimating

87

ALL-IN-RATES

ALL-IN-RATES FOR PRICING MECHANICAL APPROXIMATE QUANTITIES – cont’d PROTECTIVE INSTALLATIONS SPRINKLER INSTALLATION Recommended maximum area coverage per sprinkler head: Extra light hazard, 21 m² of floor area Ordinary hazard, 12 m² of floor area Extra high hazard, 9 m² of floor area

£

Sprinkler equipment installation, pipework, valve sets, booster pumps and water storage . . . . . . 50,000–75,000 Price per sprinkler head; including pipework, valves and supports. . . . . . . . . . . . . . . . . . . . . . .

180

PROTECTIVE INSTALLATIONS HOSE REELS AND DRY RISERS Wall mounted concealed hose reel with 36 metre hose including approximately 15 metres of pipework and isolating valve: Price per hose reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,750

100mm dry riser main including 2 way breeching valve and box,, 65mm landing valve, complete with padlock and leather strap and automatic air vent and drain valve. Price per landing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,500

COMMUNICATIONS INSTALLATIONS SECURITY ACCESS CONTROL SYSTEMS Door Mounted access control unit inclusive of door furniture, lock plus software. Including up to 50 meters of cable and termination. Including documentation testing and commissioning Internal single leaf door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internal double door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External single leaf door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Double leaf door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Management control PC with printer software and commissioning up to 1000 users.

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

1,100 1,250 1,200 1,350 12,500

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

900 950 1,750 1200 2,500 3,000

CCTV INSTALLATIONS CCTV Equipment inclusive of 50 m of cable including testing and commissioning Internal camera with Bracket . . . . . . . . Internal camera with Housing . . . . . . . Internal PTZ camera with Bracket . . . . External fixed camera with housing . . . External PTZ camera dome. . . . . . . . . External PTZ camera dome with power

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

88

Approximate Estimating ALL-IN-RATES

ALL-IN-RATES FOR PRICING MECHANICAL APPROXIMATE QUANTITIES – cont’d IT INSTALLATIONS DATA CABLING Complete channel link including, patch leads, cable, panels, testing and documentation (excludes cabinets and/or frames, patch cords, backbone/harness connectivity as well as containment). Cat Cat Cat Cat Cat Cat

5e (up to 5,000 outlets) . . . 5e (5,000 to 15,000 outlets) 6 (up to 5,000 outlets) . . . . 6 (5,000 to 15,000 outlets) . 7 (up to 5,000 outlets) . . . . 7 (5,000 to 15,000 outlets) .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

Cost per point £

38.81 35.94 50.31 47.44 81.94 79.06

PIPEWORK HOT AND COLD WATER excludes insulation, valves and ancillaries etc. Light gauge copper tube to EN1057 R250 (TX) formerly BS 2871 part 1 table X with joints as described including allowance for waste, fittings and supports assuming average runs with capillary joints up to 54mm and bronze welded thereafter

Cost per metre £

Horizontal 15mm 22mm 28mm 35mm 42mm 54mm 67mm 76mm 108mm

High Level Distribution ................. ................. ................. ................. ................. ................. ................. ................. .................

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. 31.16 . 31.87 . 41.60 . 45.28 . 53.68 . 67.41 . . . . . . . . 94.19 .................... . 111.98 . 153.14

Risers 15mm 22mm 28mm 35mm 42mm 54mm 67mm 76mm 108mm

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

18.15 20.88 31.90 36.18 42.98 52.58 85.86 92.47 122.39

at Low Level ...................................................... ...................................................... ......................................................

53.44 63.19 89.75

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

Toilet Areas etc 15mm . . . . 22mm . . . . 28mm . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

Approximate Estimating

89

ALL-IN-RATES

ALL-IN-RATES FOR PRICING MECHANICAL APPROXIMATE QUANTITIES – cont’d PIPEWORK – cont’d LTHW AND CHILLED WATER excludes insulation, valves and ancillaries etc Black heavy weight mild steel tube to BS1387 with joints in the running length, allowance for waste, fittings and supports assuming average runs Cost per metre LTHW Chilled Water £ £ Horizontal Distribution – Basements etc. 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

38.76 42.09 46.33 53.90 60.92 71.64 80.08 108.06 143.52 199.82 260.55 347.06 427.41 501.32

38.76 42.09 46.33 53.90 60.92 71.64 80.08 108.06 143.52 199.82 260.55 347.06 427.41 501.32

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

24.12 27.13 30.33 35.57 38.89 45.76 58.74 80.09 104.76 125.39 148.92 250.70 293.97 331.93

24.12 27.13 30.33 35.57 38.89 45.76 58.74 80.09 104.76 125.39 148.92 250.70 293.97 331.93

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

37.05 42.01 45.14 52.44 58.85 67.24 -

37.05 42.01 45.14 52.44 58.85 67.24 74.93

Risers 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm

On Floor Distribution 15mm 20mm 25mm 32mm 40mm 50mm 65mm

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

90

Approximate Estimating ALL-IN-RATES

ALL-IN-RATES FOR PRICING MECHANICAL APPROXIMATE QUANTITIES – cont’d PIPEWORK – cont’d LTHW AND CHILLED WATER excludes insulation, valves and ancillaries etc. Black heavy weight mild steel tube to BS1387 with joints in the running length, allowance for waste, fittings and supports assuming average runs Cost per metre LTHW Chilled Water £ £ Plantroom Areas etc. 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

39.38 43.36 47.92 55.77 63.03 74.46 82.31 110.56 147.83 206.84 272.64 361.01 444.85 525.55

39.38 43.36 47.92 55.77 63.03 74.46 82.31 110.56 147.83 206.84 272.64 361.01 444.85 525.55

Approximate Estimating

91

ALL-IN-RATES

ALL-IN-RATES FOR PRICING ELECTRICAL APPROXIMATE QUANTITIES HV/LV INSTALLATIONS The cost of HV/LV equipment will vary according to the electricity supplier’s requirements, the duty required and the actual location of the site. For estimating purposes the items indicated below are typical of the equipment required in a HV substation incorporated into a building. Cost per Unit £

RING MAIN UNIT Ring Main Unit , 11kv including electrical terminations. . . . . . . . . . . . . . . . . . . . . . . . .

Cost per KVA £

TRANSFORMERS Oil filled transformers, 11kv to 415v including electrical terminations . . . . . . . . . . . . . . Cast Resin transformers, 11kv to 415v including electrical terminations . . . . . . . . . . . . Midal filled transformer, 11kv to 415v including electrical transformations . . . . . . . . . . .

14 to 18 15 to 20 16–22 Cost per Section £

HV SWITCHGEAR Cubicle section HV switchpanel, Form 4 type 6 including air circuit breakers, meters and electrical terminations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20,000–25,000 Cost per isolator £

LV SWITCHGEAR LV switchpanel, Form terminations . . . . . . . LV switchpanel, Form terminations . . . . . . .

12,000–18,000

3 including all isolators, fuses, meters and electrical ................................................ 4 type 5 including all isolators, fuses, meters and electrical ................................................

EXTERNAL PACKAGED SUB-STATION Extra over cost for prefabricated packaged sub station housing excludes base and protective security fencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

STANDBY GENERATING SETS Diesel powered including control panel, flue, oil day tank and attenuation Approximate installed cost, LV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approximate installed cost, HV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,800–2,800 3,000–4,000 £ 20,000–25,000 Cost per KVA £ 220–350 250–400

UNINTERRUPTIBLE POWER SUPPLY Rotary UPS including control panel and choke transformer (excludes distribution) Approximate installed cost (range 1000KVA to 2500KVA) . . . . . . . . . . . . . . . . . . . . . .

400–500

Static UPS including control panel, automatic bypass, DC isolator and batteries for 30 minutes standby (excludes distribution) Approximate installed cost (range 500KVA to 1000KVA) . . . . . . . . . . . . . . . . . . . . . . .

200–300

92

Approximate Estimating ALL-IN-RATES

ALL-IN-RATES FOR PRICING ELECTRICAL APPROXIMATE QUANTITIES – cont’d SMALL POWER Approximate prices for wiring of power points of length not exceeding 20m, including accessories, wireways but excluding distribution boards. Per Point £

13 amp Accessories Wired in PVC insulated twin and earth cable in Domestic properties . . . . . . . . . . . . . . . . . . Commercial properties . . . . . . . . . . . . . . . . Industrial properties . . . . . . . . . . . . . . . . . .

ring main circuit ......................................... ......................................... .........................................

55.00 75.00 75.00

Wired in PVC insulated twin and earth cable in Domestic properties . . . . . . . . . . . . . . . . . . Commercial properties . . . . . . . . . . . . . . . . Industrial property. . . . . . . . . . . . . . . . . . . .

radial circuit ......................................... ......................................... .........................................

70.00 90.00 90.00

Wired in LSF insulated single cable in ring main circuit Commercial properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial property. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

90.00 90.00

Wired in LSF insulated single cable in radial circuit Commercial properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial property. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

110.00 110.00

45 amp wired in PVC insulated twin and earth cable Domestic properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

110.00

Low voltage power circuits Three phase four wire radial circuit feeding an individual load, wired in LSF insulated single cable including all wireways, isolator, not exceeding 10 metres; in commercial properties. Cable size mm² 1.5 2.5 4 6 10 16

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

180.00 195.00 210.00 230.00 265.00 290.00

Three phase four core radial circuit feeding an individual load item, wired in LSF/SWA/XLPE insulated cable including terminations, isolator; clipped to surface, not exceeding 10 metres in commercial properties. Cable size mm² 1.5 2.5 4 6 10 16

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

133.00 148.00 168.00 180.00 276.00 357.00

Approximate Estimating

93

ALL-IN-RATES

ALL-IN-RATES FOR PRICING ELECTRICAL APPROXIMATE QUANTITIES – cont’d LIGHTING Approximate prices for wiring of lighting points including rose, wireways but excluding distribution boards, luminaires and switches. Per Point £

Final Circuits Wired in PVC insulated twin and earth cable Domestic properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Commercial properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40.00 50.00 50.00

Wired in LSF insulated single cable Commercial properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Industrial property. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

65.00 65.00

ELECTRICAL WORKS IN CONNECTION WITH MECHANICAL SERVICES The cost of electrical connections to mechanical services equipment will vary depending on the type of 5–10 building and complexity of the equipment. Includes for power wiring, isolators and associated wireways

FIRE ALARMS Cost per point for two core MICC insulated wired system including all terminations, supports and wireways. Call point. . . . . . . . . . . . . . . . . . . . . . . . Smoke detector . . . . . . . . . . . . . . . . . . . Smoke/heat detector . . . . . . . . . . . . . . . Heat detector. . . . . . . . . . . . . . . . . . . . . Heat detector and sounder . . . . . . . . . . . nput/output/relay units . . . . . . . . . . . . . . Alarm sounder . . . . . . . . . . . . . . . . . . . . Alarm sounder/beacon . . . . . . . . . . . . . . Speakers/voice sounders . . . . . . . . . . . . Speakers/voice sounders (weatherproof) . Beacon/strobe . . . . . . . . . . . . . . . . . . . . Beacon/strobe (weatherproof) . . . . . . . . . Door release units . . . . . . . . . . . . . . . . . Beam detector . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

250.00 220.00 250.00 240.00 210.00 300.00 240.00 280.00 280.00 290.00 220.00 320.00 320.00 850.00

94

Approximate Estimating ALL-IN-RATES

ALL-IN-RATES FOR PRICING ELECTRICAL APPROXIMATE QUANTITIES – cont’d FIRE ALARMS – cont’d Cost per point for wireless system Per Point £ Call point. . . . . . . . . . . . . . . . . . . . . . . . Smoke detector . . . . . . . . . . . . . . . . . . . Smoke/heat detector . . . . . . . . . . . . . . . Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . Heat detector and sounder . . . . . . . . . . . Input/output/relay units . . . . . . . . . . . . . . Alarm sounder . . . . . . . . . . . . . . . . . . . . Alarm sounder/beacon . . . . . . . . . . . . . . Speakers/voice sounders . . . . . . . . . . . . Speakers/voice sounders (weatherproof) . Beacon/strobe . . . . . . . . . . . . . . . . . . . . Beacon/strobe (weatherproof) . . . . . . . . . Door release units . . . . . . . . . . . . . . . . . Beam detector . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. 190.00 . 190.00 . 230.00 . 200.00 . 400.00 . 380.00 . 360.00 . 420.00 . 380.00 . 460.00 . 380.00 . 390.00 . 300.00 . 1,000.00

For costs for zone control panel, battery chargers and batteries, see ‘Prices for Measured Work’ section. EXTERNAL LIGHTING Estate road lighting Post type road lighting lantern 70 watt CDM-T 3000k complete with 5m high column with hinged lockable door, control gear and cut-out including 2.5 mm two core butyl cable internal wiring, interconnections and earthing fed by 16 mm² four core XLPE/SWA /LSF cable and terminations. Approximate installed price per metre road length (based on 300 metres run) including time switch but excluding builder's work in connection Columns erected at 30 m intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

£70.00 per m of road

Bollard lighting Bollard lighting fitting 26 watt TC-D 3500k including control gear, all internal wiring, interconnections, earthing and 25 metres of 2.5 mm² three core XLPE/SWA/LSF cable Approximate installed price excluding builder's work in connection . . . . . . . . . . . . . . . . . .

£1,000.00 each

Outdoor flood lighting Wall mounted outdoor flood light fitting complete with tungsten halogen lamp, mounting bracket, wire guard and all internal wiring and containment; fixed to brickwork or concrete and connected. Installed price 500 watt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installed price 1000 watt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

£170.00–£250.00 £200.00–£300.00

Pedestal mounted outdoor floor light fitting complete with1000 watt MBF/U lamp, mounting bracket, control gear, contained in weatherproof steel box, all internal wiring and containment, interconnections and earthing; fixed to brickwork or concrete and connected Approximate installed price excluding builder's work in connection. . . . . . . . . . . . . . . . . . .

£1,000.00 each

Approximate Estimating

95

ALL-IN-RATES

ALL-IN-RATES FOR PRICING SPECIALIST APPROXIMATE QUANTITIES LIFT INSTALLATIONS The cost of lift installations will vary depending upon a variety of circumstances. The following prices assume a car height of 2.2 metres, manufacturers standard car finish, brushed stainless steel 2 panel centre opening doors to BSEN81 part 1 & 2 and Lift Regulations 1997. Passenger Lifts Machine Room Above

8 Person £

10 Person £

13 Person £

17 Person £

21 Person £

26 Person £

Electrically operated AC drive serving 2 levels with directional collective controls and a speed of 1.0 m/s

58,321

63,084

66,306

74,824

84,843

97,345

As above serving 4 levels and a speed of 1.0m/s

67,893

72,570

76,276

85,759

96,890

110,804

As above serving 6 levels and a speed of 1.0m/s

77,258

82,031

86,038

96,487

108,694

123,955

As above serving 8 levels and a speed of 1.0m/s

86,622

91,494

95,800

107,214

120,498

137,104

As above serving 10 levels and a speed of 1.0m/s

95,986

100,954

105,558

117,942

132,301

150,254

As above serving 12 levels and a speed of 1.0m/s

105,350

110,417

115,321

128,669

144,105

163,403

As above serving 14 levels and a speed of 1.0m/s

116,580

95,687

126,948

141,261

156,947

176,552

Increase speed from 1.0 to 1.6 m/s

4,141

3,925

4,194

4,183

4,183

4,183

Increase speed from 1.6m/s to 2.0m/s

878

878

1,167

1,167

1,474

1,474

Increase speed from 2.0m/s to 2.5m/s

2,040

2,040

2,492

2,492

2,934

2,934

Enhanced finish to car – Centre mirror, flat ceiling, carpet

2,816

3,076

2,992

3,512

4,083

4,797

Add to above for:

96

Approximate Estimating ALL-IN-RATES

ALL-IN-RATES FOR PRICING SPECIALIST APPROXIMATE QUANTITIES – cont’d LIFT INSTALLATIONS – cont’d Passenger Lifts Machine Room Above – cont’d Bottom motor room

8 Person £

10 Person £

13 Person £

17 Person £

21 Person £

26 Person £

7,308

7,308

7,308

8,780

8,780

9,063

Fire fighting control

5,834

5,834

5,834

5,834

5,834

5,834

Glass back

2,492

2,889

3,445

4,192

4,192

4,192

Glass doors

20,053

20,053

22,004

22,658

22,658

22,658

Painting to entire pit

2,161

2,161

2,161

2,161

2,161

2,161

Dual seal shaft

4,233

4,233

4,233

5,085

5,085

5,085

Dust sealing machine room

816

816

1,360

1,360

1,360

1,360

Intercom to reception desk and security room

383

383

383

383

383

383

Heating, cooling and ventilation to machine room

849

849

849

849

849

849

Shaft lighting / small power

4,055

4,055

4,055

4,055

4,055

4,055

Motor room lighting / small power

1,360

1,360

1,529

1,677

1,677

1,677

Lifting beams

1,387

1,387

1,387

1,387

1,387

1,387

918

918

918

918

918

918

Shaft secondary steelwork

6,147

6,288

6,571

6,719

6,719

6,719

Independent insurance inspection

1,980

1,980

1,980

1,980

1,980

1,980

12 Month warranty service

1,916

1,916

1,916

1,916

1,916

1,916

10mm Equipotential bonding of all entrance metalwork

Approximate Estimating

97

ALL-IN-RATES

ALL-IN-RATES FOR PRICING SPECIALIST APPROXIMATE QUANTITIES – cont’d LIFT INSTALLATIONS – cont’d Passenger Lifts Machine Room-less

8 Person £

10 Person £

13 Person £

17 Person £

21 Person £

26 Person £

Electrically operated AC drive serving 2 levels with directional collective controls and a speed of 1.0 m/s

52,687

57,779

61,619

74,696

81,650

90,151

As above serving 4 levels and a speed of 1.0m/s

61,609

66,203

70,901

84,676

91,974

101,563

As above serving 6 levels and a speed of 1.0m/s

70,564

75,199

80,062

94,531

102,214

112,768

As above serving 8 levels and a speed of 1.0m/s

79,475

84,233

89,260

104,427

112,349

123,972

As above serving 10 levels and a speed of 1.0m/s

88,437

93,314

98,505

114,370

122,623

135,180

As above serving 12 levels and a speed of 1.0m/s

97,454

102,451

107,808

124,246

132,974

144,117

As above serving 14 levels and a speed of 1.0m/s

109,161

111,452

118,693

135,694

145,785

160,000

Increase speed from 1.0 to 1.6 m/s

3,023

2,718

2,928

4,385

5,011

6,435

Enhanced finish to car – Centre mirror, flat ceiling, carpet

2,818

2,776

2,992

3,323

4,398

5,029

Fire fighting control

7,279

7,279

7,279

-

-

-

Painting to entire pit

806

806

806

806

806

806

Dual seal shaft

747

756

784

947

1,004

1,004

4,055

4,055

4,055

-

-

-

Add to above for:

Shaft lighting / small power

98

Approximate Estimating ALL-IN-RATES

ALL-IN-RATES FOR PRICING SPECIALIST APPROXIMATE QUANTITIES – cont’d LIFT INSTALLATIONS – cont’d Passenger Lifts Machine Room-less – cont’d

8 Person £

10 Person £

13 Person £

17 Person £

21 Person £

26 Person £

Intercom to reception desk and security room

382

382

382

382

382

382

Heating, cooling and ventilation to machine room

849

849

849

849

849

849

Lifting beams

906

906

906

1,265

1,437

1,331

10mm Equipotential bonding of all entrance metalwork

435

435

435

435

435

435

Shaft secondary steelwork

5,834

5,834

5,834

-

-

-

Independent insurance inspection

1,980

1,980

1,980

1,980

1,980

1,980

840

870

881

907

933

933

2000 kg £

2250 kg £

2500 kg £

3000 kg £

Electrically operated two speed serving 2 levels to take 1000 kg load, prime coated internal finish and a speed of 1.0 m/s

97,345

107,560

108,906

117,969

As above serving 4 levels and a speed of 1.0m/s

110,804

121,451

122,796

138,597

A As above serving 6 levels and a speed of 1.0m/s

123,954

135,058

136,377

152,458

As above serving 8 levels and a speed of 1.0m/s

137,104

148,613

149,958

169,702

As above serving 10 levels and a speed of 1.0m/s

150,254

162,197

163,539

186,946

As above serving 12 levels and a speed of 1.0m/s

163,406

175,773

177,119

204,189

As above serving 14 levels and a speed of 1.0m/s

176,552

189,355

190,699

221,434

Add to above for:

12 Month warranty service Goods Lifts Machine Room Above

Approximate Estimating

99

ALL-IN-RATES

ALL-IN-RATES FOR PRICING SPECIALIST APPROXIMATE QUANTITIES – cont’d LIFT INSTALLATIONS – cont’d Goods Lifts Machine Room Above – cont’d

2000 kg £

2250 kg £

2500 kg £

3000 kg £

Increased speed of travel from 1.0 to 1.6 metres per second

1,360

-

-

-

Enhanced finish to car – Centre mirror, flat ceiling, carpet

3,670

3,670

3,670

-

Bottom motor room

8,780

-

-

-

Painting to entire pit

660

1,397

1,397

1,397

5,936

5,936

5,936

-

Intercom to reception desk and security room

383

383

383

383

Heating, cooling and ventilation to machine room

849

849

849

849

1,265

1,265

1,265

1,265

755

918

918

918

2,518

2,518

2,518

2,518

690

1,264

1,264

-

Add to above for:

Dual seal shaft

Lifting beams 10mm Equipotential bonding of all entrance metalwork Independent insurance inspection 12 Month warranty service Goods Lifts Machine Room-less

2000 kg £

2250 kg £

2500 kg £

Electrically operated two speed serving 2 levels to take 1000 kg load, prime coated internal finish and a speed of 1.0 m/s

87,980

94,101

100,229

As above serving 4 levels and a speed of 1.0m/s

99,392

105,723

112,057

As above serving 6 levels and a speed of 1.0m/s

110,597

110,597

123,883

As above serving 8 levels and a speed of 1.0m/s

121,802

128,767

135,711

As above serving 10 levels and a speed of 1.0m/s

133,009

140,275

147,542

As above serving 12 levels and a speed of 1.0m/s

144,211

151,790

159,367

100

Approximate Estimating ALL-IN-RATES

ALL-IN-RATES FOR PRICING SPECIALIST APPROXIMATE QUANTITIES – cont’d LIFT INSTALLATIONS – cont’d Goods Lifts Machine Room-less – cont’d

2000 kg £

2250 kg £

2500 kg £

As above serving 14 levels and a speed of 1.0m/s

157,830

164,513

171,195

5,018

8,498

-

4,139

5,665

8,499

Painting to entire pit

806

-

951

Dual seal shaft

742

-

-

Intercom to reception desk and security room

383

-

-

Heating, cooling and ventilation to machine room

425

849

849

1,222

1,132

1,132

435

-

-

1,980

1,980

1,980

690

690

690

Add to above for: Increased speed of travel from 1.0 to 1.6 metres per second Add to above for: Enhanced finish to car – Centre mirror, flat ceiling, carpet Add to above for:

Lifting beams 10mm Equipotential bonding of all entrance metalwork Independent insurance inspection 12 Month warranty service

ESCALATOR INSTALLATIONS 30Ø Pitch escalator with a rise of 3 to 6 metres with standard balustrades . . . . . . . . . . . . . . . . . . . . Each £ 1000mm step width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97,997 Add to above for: Balustrade Lighting . . . . . . . . . . . . . Skirting Lighting . . . . . . . . . . . . . . . . Emergency stop button pedestals . . . Truss cladding – Stainless steel . . . . Truss cladding – Spray painted steel.

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

9,063 9,800 3,070 27,984 22,375

Approximate Estimating

101

ELEMENTAL COSTS

AIRPORT TERMINAL BUILDING New build airport terminal building, premium quality, located in the South East, handling both domestic and international flights with a gross internal floor area (GIA) of 25,000m². These costs exclude baggage handling, check-in systems, pre-check in and boarding security systems, vertical transportation and services to aircraft stands, with the heat source via district mains (excluded) and executed under landside access/logistics environment. Cost Summary EI. Ref.

Element

5A

Sanitaryware

5C

Total Cost £

Cost/m² £

72,000

2.88

Disposal Installations Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soil and waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Condensate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

143,000 190,000 36,000

5.72 7.60 1.44

5D

Water Installations Hot and cold water services . . . . . . . . . . . . . . . . . . . . . . . . .

428,000

17.12

5F

Space Heating and Air Treatment LTHW Heating system . . . . . . . . . . . . . . . . . . . . Chilled water system . . . . . . . . . . . . . . . . . . . . . Supply and extract air conditioning system. . . . . . Allowance for services to communications rooms .

5G

5H

5I 5K

. . . .

. . . .

. . . .

1,900,000 1,781,000 5,225,000 238,000

76.00 71.24 209.00 9.52

Ventilating Services Mechanical ventilation to baggage handling Toilet extract ventilation . . . . . . . . . . . . . . Smoke extract installation . . . . . . . . . . . . Kitchen extract system . . . . . . . . . . . . . . .

and plantrooms ............ ............ ............

. . . .

. . . .

594,000 214,000 238,000 71,000

23.76 8.56 9.52 2.84

Electrical Installation HV/LV Switchgear . . . . . . . . . . . Standby generator . . . . . . . . . . . Mains and sub mains installation . Small power installation . . . . . . . Lighting and luminaires . . . . . . . . Emergency lighting installation. . . Power to mechanical services . . .

. . . . . . .

. . . . . . .

. . . . . . .

1,544,000 950,000 1,069,000 356,000 2,328,000 285,000 166,000

61,76 38.00 42.76 14.24 93.12 11.40 6.64

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48,000

1.92

. . . . .

71,000 95,000 831,000 166,000 71,000

2.84 3.80 33.24 6.64 2.84

Carried forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19,110,000

764.40

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

Protective Installations Lightning protection . . . . . . . . . . . . . . . . . . . . Earthing and bonding . . . . . . . . . . . . . . . . . . . Sprinkler installation . . . . . . . . . . . . . . . . . . . . Dry riser and hosereel installations . . . . . . . . . Fire suppression installation to communications

. . . . . . .

. . . . . . .

. . . .

. . . . . . .

. . . .

. . . . . . .

. . . .

. . . . . . .

..... ..... ..... ..... room .

. . . .

. . . . . . .

. . . . .

. . . .

. . . . . . .

. . . . .

. . . .

. . . . . . .

. . . . .

. . . . . . .

. . . . .

. . . . .

102

Approximate Estimating ELEMENTAL COSTS

AIRPORT TERMINAL BUILDING – cont’d EI. Ref.

Element

Total Cost £

Brought forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5L

5M

Cost/m² £

19,110,000

764.40

. . . . . . .

713,000 475,000 238,000 831,000 356,000 831,000 594,000

28.52 19.00 9.52 33.24 14.24 33.24 23.76

Special Installations BMS Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,306,000

52.24

Summary total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24,454,000

978.16

Communications Installations Fire and smoke detection and alarm system . . . . . . Voice/public address system . . . . . . . . . . . . . . . . . Intruder detection . . . . . . . . . . . . . . . . . . . . . . . . . Security, CCTV and access control . . . . . . . . . . . . . Wireways for telephones, data and structured cable Structured cable installation . . . . . . . . . . . . . . . . . . Flight information display system . . . . . . . . . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

Approximate Estimating

103

ELEMENTAL COSTS

SHOPPING MALL (TENANT’S FIT OUT EXCLUDED) Natural ventilation shopping mall with approximately 33,000m² two storey retail area and a 13,000m² above ground covered car park, situated in a town centre in South East England. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

RETAIL BUILDING 33,000m2 5A

Sanitary appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25,000

0.75

5C

Disposal Installations Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soil, waste and vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

170,000 200,000

5.15 6.06

Water Installations Cold water installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot water installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

190,000 180,000

5.76 5.45

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Included

5F

Space Heating and Air Treatment Condenser water system . . . . . LTHW installation . . . . . . . . . . Air conditioning system . . . . . . . Over-door heaters at entrances

5D

5G

5H

5I

5K

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

998,000 133,000 1,007,000 30,000

30.24 4.03 30.52 0.91

Ventilation Services Public toilet ventilation . . . . . . . . . . . . . . Plant room ventilation . . . . . . . . . . . . . . . Supply and extract systems to shop units Toilet extract systems to shop units . . . . Smoke ventilation system to Mall Area . . Service corridor ventilation . . . . . . . . . . . Miscellaneous ventilation. . . . . . . . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

20,000 134,000 428,000 80,000 323,000 74,000 548,000

0.61 4.06 12.97 2.42 9.79 2.24 16.61

Electrical Installation LV distribution . . . . . . . . . . . . . . . . Standby power . . . . . . . . . . . . . . . General lighting . . . . . . . . . . . . . . . External lighting . . . . . . . . . . . . . . . Emergency lighting . . . . . . . . . . . . Small power . . . . . . . . . . . . . . . . . Mechanical services power supplies General earthing . . . . . . . . . . . . . . UPS for security and CCTV . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

732,000 120,000 1,935,000 164,000 369,000 299,000 85,000 40,000 22,000

22.18 3.64 58.64 4.97 11.18 9.06 2.58 1.21 0.67

Gas Installation Gas supplies to boilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gas supplies to Anchor (major) stores . . . . . . . . . . . . . . . . .

17,000 11,000

0.52 0.33

. . . .

40,000 428,000 Excluded Excluded

1.21 12.97

Carried forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8,802,000

266.73

Protective Installations Lightning protection . Sprinkler installation . Dry Risers . . . . . . . . Hosereel installation

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . . . . . . .

. . . .

. . . .

. . . . . . . . .

. . . .

. . . .

. . . . . . . . .

. . . .

. . . . . . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

104

Approximate Estimating ELEMENTAL COSTS

SHOPPING MALL (TENANT’S FIT OUT EXCLUDED) – cont’d EI. Ref.

Element

Total Cost £

Brought forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5L

5M

Communications Installations Fire alarm installation . . . . . Public address/ voice alarm. Security installation. . . . . . . General containment. . . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

Cost/m² £

8,802,000

266.73

249,000 164,000 359,000 359,000

7.55 4.97 10.88 10.88

Special Installations BMS/Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

548,000

16.61

Summary total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10,481,000

317.61

Disposal Installations Car park drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74,000

5.69

Ventilation Services Car park ventilation (ducted system) . . . . . . . . . . . . . . . . . . .

947,000

72.85

. . . . . . . . .

144,000 Included 359,000 Excluded 74,000 144,000 49,000 15,000 20,000

11.08

Protective Installations Sprinkler installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dry Riser and Hosereel Installation . . . . . . . . . . . . . . . . . . . .

284,000 Excluded

21.85

Communications Installations Fire alarm installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Security installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

284,000 120,000

21.85 9.23

Special Installations BMS/Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Entry/exit barriers, pay stations . . . . . . . . . . . . . . . . . . . . . . .

75,000 70,000

5.77 5.38

2,659,000.00

204.55

CAR PARK – 13,000m2 5C 5G 5H

5K

5L

5M

Electrical Installation LV distribution . . . . . . . . . . . . . . . . Standby power . . . . . . . . . . . . . . . General lighting . . . . . . . . . . . . . . . External lighting . . . . . . . . . . . . . . . Emergency lighting . . . . . . . . . . . . Small power . . . . . . . . . . . . . . . . . Mechanical services power supplies General earthing . . . . . . . . . . . . . . Ramp frost protection . . . . . . . . . .

Summary total

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

. . . . . . . . .

27.62 5.69 11.08 3.77 1.15 1.54

Approximate Estimating

105

ELEMENTAL COSTS

OFFICE BUILDING Speculative 15 storey office in Central London for multiple tenant occupancy with a gross floor area of 19,300m². A four pipe fan coil system, with roof mounted cooling towers, gas fired boilers, and basement mounted water cooled chillers. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

SHELL AND CORE 27,490m2 GIA 5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

131,200

6.80

5C

Disposal Installations Rainwater/Soil and Waste . . . . . . . . . . . . . . . . . . . . . . . . . . Condensate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

348,900 36,300

18.08 1.88

Water Installations Hot and cold water services . . . . . . . . . . . . . . . . . . . . . . . . .

258,600

13.40

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

166,600

8.63

5F

Space Heating and Air Treatment LTHW Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chilled water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ductwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

302,000 872,600 821,800

15.65 45.21 42.58

Ventilating Services Toilet extract ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basement extract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Miscellaneous ventilation systems . . . . . . . . . . . . . . . . . . . .

116,000 291,000 442,700

6.02 15.08 22.94

. . . . .

125,000 1,242,100 406,800 78,600 96,700

6.48 64.36 21.08 4.07 5.01

5I

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25,100

1.30

5K

Protection Wet risers . . . . . . . . Sprinklers . . . . . . . . Earthing and bonding Lightning protection .

5D

5G

5H

5L

Electrical Installation Generator . . . . . . . . . . . . . . . . . . . . . . . . . HV/LV supply/distribution . . . . . . . . . . . . . . General lighting . . . . . . . . . . . . . . . . . . . . . General power . . . . . . . . . . . . . . . . . . . . . Electrical services for mechanical equipment

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

190,300 353,200 38,600 38,600

9.86 18.30 2.00 2.00

Communication Installation Fire/Voice alarms . . . . . . . . . . . . . . . . . Voice and data (wireways) . . . . . . . . . . Security (wireways) . . . . . . . . . . . . . . . Disabled/refuge alarms . . . . . . . . . . . . CCTV/Access control/ Intruder detection

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

270,200 29,000 25,100 60,400 75,000

14.00 1.50 1.30 3.13 3.89

Carried forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6,842,400

354.55

106

Approximate Estimating ELEMENTAL COSTS

OFFICE BUILDING – cont’d EI. Ref.

5M

EI. Ref.

Element

Total Cost £

Cost/m² £

Brought forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6,842,400

354.55

Special Installation Building management systems . . . . . . . . . . . . . . . . . . . . . . .

426,100

22.08

Summary total (based on Gross Internal Area – GIA) . . . . . . . .

7,268,500

376.63

Element

Total Cost £

Cost/m² £

CATEGORY 'A' FIT OUT – 12,500m2 NIA 5C

Disposal Installations Condensate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

97,500

7.80

5F

Space Heating and Air Treatment LTHW Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chilled water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ductwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

359,500 425,900 1,063,800

28.76 34.07 85.10

Electrical Installation Lighting installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical services in connection . . . . . . . . . . . . . . . . . . . . . . Tenant distribution board . . . . . . . . . . . . . . . . . . . . . . . . . . .

877,500 43,800 81,000

70.20 3.50 6.48

5K

Protection Sprinkler installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

280,000

22.40

5L

Communication Installation Fire/Voice alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

162,000

12.96

Special Installations Building management system . . . . . . . . . . . . . . . . . . . . . . . .

249,100

19.93

Summary total (based on Nett Internal Area – NIA) . . . . . . . . . .

3,640,100

291.20

5H

5M

Approximate Estimating

107

ELEMENTAL COSTS

BUSINESS PARK New build office in South East within the M25 part of a speculative business park with a gross floor area of 9,800m2. A full air displacement system with roof mounted air cooled chillers, gas fired boilers and air handling plant. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

SHELL AND CORE – 9,800m2 GIA 5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55,500

5.66

5C

Disposal Installations Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soil and waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27,200 77,100

2.78 7.87

Water Installations Cold water services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot water services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

67,900 19,500

6.93 1.99

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44,100

4.50

5F

Space Heating and Air Treatment LTHW Heating; plantroom and risers . . . . . . . . . . . . . . . . . . Chilled water; plantroom and risers . . . . . . . . . . . . . . . . . . . . Ductwork; Plantroom and risers . . . . . . . . . . . . . . . . . . . . . .

125,900 373,100 628,000

12.85 38.07 64.08

Ventilating Services Toilet and miscellaneous ventilation . . . . . . . . . . . . . . . . . . .

54,700

5.58

. . . .

206,600 167,500 43,700 19,600

21.08 17.09 4.46 2.00

5I

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14,500

1.48

5K

Protective Installation Earthing and bonding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lightning protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dry risers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16,900 22,300 10,300

1.72 2.28 1.05

Communication Installation Fire alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Security (wireways) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data and voice (wireways) . . . . . . . . . . . . . . . . . . . . . . . . . .

83,300 16,500 16,500

8.50 1.68 1.68

Special Installation Building management systems . . . . . . . . . . . . . . . . . . . . . . .

186,900

19.07

Summary total (based on Gross Internal Area – GIA) . . . . . . . .

2,277,600

232.40

5D

5G 5H

5L

5M

Electrical Installation LV supply/distribution . . . . . . . . . . . . . . . . . . . . . General lighting . . . . . . . . . . . . . . . . . . . . . . . . . General power . . . . . . . . . . . . . . . . . . . . . . . . . Electrical services in connection with mechanical

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

108

Approximate Estimating ELEMENTAL COSTS

BUSINESS PARK – cont’d EI. Ref.

Element

Total Cost £

Cost/m² £

CATEGORY 'A' FIT OUT – 8,100m2 NIA 5F

5H

5K 5L 5M

Space Heating and Air Treatment LTHW Heating and perimeter heaters . . . . . . . . . . . . . . . . . . Floor swirl diffusers and supply ductwork . . . . . . . . . . . . . . .

324,000 201,000

40.00 24.81

Electrical Installation Distribution boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General lighting, recessed including lighting controls . . . . . . .

24,300 380,700

3.00 47.00

Protective Installation Earthing and bonding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10,100

1.25

Communication Installation Fire alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40,500

5.00

Special Installations Building management systems . . . . . . . . . . . . . . . . . . . . . . .

48,300

5.96

Summary total (Based on Nett Internal Area – NIA) . . . . . . . . .

1,028,900

127.02

Approximate Estimating

109

ELEMENTAL COSTS

PERFORMING ARTS CENTRE (LOW SPECIFICATION) Performing Arts centre with a Gross Internal Area (GIA) of 6,000m², on a low specification for the theatre systems and with natural ventilation. The development comprises dance studios and a theatre auditorium. The theatre would require all the necessary stage lighting, machinery and equipment installed in a modern professional theatre (these are excluded from the model, as assumed to be FF&E, but the containment and power wiring is included). Also not included are the staff call system, audio and video recording, EPOS ticket system, production recording and relay to TV screens and enhanced lighting including dimming – for such, refer to the High Specification Model. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74,000

12.33

5C

Disposal Installations Soil, Waste and Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . .

97,000

16.17

Water Installations Cold water services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot water services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

57,000 57,000

9.50 9.50

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

137,000

22.83

5F

Space Heating and Air Treatment Heating with limited cooling . . . . . . . . . . . . . . . . . . . . . . . . . DX Cooling to Comms and Amps rooms . . . . . . . . . . . . . . . .

399,000 34,000

66.50 5.67

Ventilating Services Ventilation and extract systems . . . . . . . . . . . . . . . . . . . . . .

690,000

115.00

Electrical Installation LV supply/distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Small power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

314,000 496,000 171,000

52.33 82.67 28.50

5I

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17,000

2.83

5K

Protection Lighting protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17,000

2.83

Communication Installation Fire alarms and detection . . . . . . . . . . . . . . . . . . . . . . . . . . . Voice and Data (containment only) . . . . . . . . . . . . . . . . . . . . Security, Access, Control and Disabled alarms . . . . . . . . . . .

200,000 40,000 177,000

33.33 6.67 29.50

Special Installation Building management systems . . . . . . . . . . . . . . . . . . . . . . . Theatre systems includes for containment and power wiring .

211,000 280,000

35.17 46.67

Summary total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3,648,300

578.00

5D

5G 5H

5L

5M

110

Approximate Estimating ELEMENTAL COSTS

PERFORMING ARTS CENTRE (HIGH SPECIFICATION) Performing Arts centres with a Gross Internal Area (GIA) of 6,000m², upon which this cost analysis has been based, on a high specification for the theatre systems and with cooling to the Auditorium. The development comprises of dance studios and a theatre auditorium. The theatre would require all the necessary stage lighting, machinery and equipment installed in a modern professional theatre (these are excluded from the model, as assumed to be FF&E, but the containment and power wiring is included). Included are the staff call system/paging, audio and video recording, EPOS ticket system, production recording and relay to TV screens and enhanced lighting including dimming (not stage).

Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

80,000

13.33

5C

Disposal Installations Soil, Waste and Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . .

103,000

17.17

Water Installations Cold water services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot water services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

57,000 51,000

9.50 8.50

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

137,000

22.83

5F

Space Heating and Air Treatment Heating and ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooling to Auditorium with DX to Comms and Amps rooms . .

456,000 399,000

76.00 66.50

5G

Ventilating Services Ventilation and extract systems to toilets, kitchen and workshop

798,000

133.00

5H

Electrical Installation LV supply/distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Small power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

342,000 627,000 200,000

57.00 104.50 33.33

5D

5I

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17,000

2.83

5K

Protection Lighting protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17,000

2.83

5L

Communication Installation Fire alarms and detection . . . . . . . . . . . . . . . . . . . . . . . . . . . Voice and Data complete installation (excluding active equipment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Security, Access, Control, Disabled alarms, Staff paging . . . .

228,000

38.00

114,000 200,000

19.00 33.33

Special Installation Building management systems . . . . . . . . . . . . . . . . . . . . . . . Theatre systems includes for containment and power wiring .

228,000 371,000

38.00 61.83

Summary total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4,425,000

737.48

5M

Approximate Estimating

111

ELEMENTAL COSTS

SPORTS HALL Single storey sports hall, located in the South East, with a gross internal area of 1,200m² (40m x 30m). Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13,000

10.83

5C

Disposal Installations Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soil and waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4,000 8,000

3.33 6.67

5D

Water Installations Hot and cold water services . . . . . . . . . . . . . . . . . . . . . . . . .

19,000

15.83

5E

Heat Source Boiler, flues, pumps and controls . . . . . . . . . . . . . . . . . . . . .

15,000

12.50

5F

Space Heating and Air Treatment Warm air heating to sports hall area . . . . . . . . . . . . . . . . . . . Radiator heating to ancillary areas . . . . . . . . . . . . . . . . . . . .

17,000 27,000

14.17 22.50

Ventilating Services Ventilation to changing, fitness and sports hall areas . . . . . . .

18,000

15.00

Electrical Installations Main switchgear and sub-mains . . . . . . . . Small power . . . . . . . . . . . . . . . . . . . . . . Lighting and luminaries to sports hall areas Lighting and luminaries to ancillary areas .

15,000 13,000 22,000 25,000

12.50 10.83 18.33 20.83

5G 5H

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

5I

Gas Installation

5K

Protective Installations Lightning protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Included in 5E

5L

Communications Installations Fire, smoke detection and alarm system, intruder detection CCTV Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Public address and music systems . . . . . . . . . . . . . . . . . . Wireways for telephone and data . . . . . . . . . . . . . . . . . . .

4,000

3.33

. . . .

14,000 17,000 8,000 3,000

11.67 14.17 6.67 2.50

Summary total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

242,000

201.66

. . . .

112

Approximate Estimating ELEMENTAL COSTS

HOTELS 200 Bedroom, four star hotel, situated in Central London, with a gross internal floor area of 16,500m². The development comprises a ten storey building with large suites on each guest floor, together with banqueting, meeting rooms and leisure facilities. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

549,000

33.27

5C

Disposal Installations Rainwater, soil and waste . . . . . . . . . . . . . . . . . . . . . . . . . .

470,000

28.48

5D

Water Installations Hot and cold water services . . . . . . . . . . . . . . . . . . . . . . . . .

705,00

42.73

5E

Heat Source Condensing boiler and pumps etc . . . . . . . . . . . . . . . . . . . .

188,000

11.39

5F

Space Heating and Air Treatment Air conditioning system; chillers, pumps, air handling units, ductwork, fan coil units etc; to guest rooms, public areas, meeting and banquet rooms . . . . . . . . . . . . . . . . . . . . . . . . .

2,195,000

133.03

5G

Ventilating Services General toilet extract and ventilation to kitchens and bathrooms etc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

705,000

42.73

Electrical Installation HV/LV Installation, standby power, lighting, emergency lighting and small power to guest floors and public areas including earthing and lightning protection . . . . . . . . . . . . . . . . . . . . . .

2,900,000

175.76

5I

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39,000

2.36

5K

Protective Installations Dry risers and sprinkler installation . . . . . . . . . . . . . . . . . . . .

627,000

38.00

721,000 235,000

43.70 14.24

408,000

24.73

5H

5L

5M

Communications Installations Fire, smoke detection and alarm system/security CCTV . . . . . Background music, AV wireways . . . . . . . . . . . . . . . . . . . . . Telecommunications, data and T.V. wiring (no hotel management and head end equipment) . . . . . . . . . . . . . . . . . . . . . . . . . . Special Installations Building Management System . . . . . . . . . . . . . . . . . . . . . . .

429,000

24.73

Summary total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10,171,000

616.42

Approximate Estimating

113

ELEMENTAL COSTS

STADIUM – NEW A three storey stadium, located in Greater London with gross internal area of 85,000m² and incorporating 60,000 spectator seats. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

888,000

10.45

5C

Disposal Installations Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Above ground drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . .

323,000 969,000

3.80 11.40

Water Installations Hot and cold water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,857,000

21.85

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

808,000

9.51

5F

Space Heating and Air Treatment Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

565,000 1,292,000

6.65 15.20

Ventilating Services Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4,441,000

52.25

Electrical Installation HV/LV Supply . . . . . . . . . . . . . . . . . . . LV Distribution . . . . . . . . . . . . . . . . . . . General lighting . . . . . . . . . . . . . . . . . . Small power . . . . . . . . . . . . . . . . . . . . Earthing and bonding . . . . . . . . . . . . . . Power supply to mechanical equipment Pitch lighting . . . . . . . . . . . . . . . . . . . .

. . . . . . .

808,000 2,100,000 5,168,000 1,292,000 100,000 109,000 665,000

9.51 24.71 60.80 15.20 1.18 1.28 7.85

5I

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

81,000

0.95

5K

Protective Installations Lightning protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

109,000 204,000

1.28 2.40

. . . . . .

646,000 1,292,000 969,000 2,584,000 727,000 242,000

7.60 15.20 11.40 30.40 8.55 2.85

Special Installations BMS/Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,211,000

14.25

Summary total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29,450,000

346.47

Cost per seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

£490.83

5D

5G 5H

5L

5M

Communications Installations Wireways for data, TV, telecom and PA Public address . . . . . . . . . . . . . . . . . . Security . . . . . . . . . . . . . . . . . . . . . . . Data voice installations . . . . . . . . . . . . Fire alarms . . . . . . . . . . . . . . . . . . . . . Disabled/refuse alarm/call systems . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

. . . . . . .

. . . . . .

114

Approximate Estimating ELEMENTAL COSTS

PRIVATE HOSPITAL New build project building. The works consist of a new 80 bed hospital of approximately 15,000m², eight storey with a plant room. All heat is provided from existing steam boiler plant, medical gases are also served from existing plant. The project includes the provision of additional standby electrical generation to serve the wider site requirements. This hospital has six operating theatres, ITU/HDU department, pathology facilities, diagnostic imaging, out patient facilities and physiotherapy. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

295,000

19.67

5C

Disposal Installations Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soil and waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specialist drainage (above ground) . . . . . . . . . . . . . . . . . . . .

38,000 341,000 21,000

2.53 22.73 1.40 49.87

5D

Water Installations Hot and cold water services . . . . . . . . . . . . . . . . . . . . . . . . .

748,000

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Included in 5F

5F

Space Heating and Air Treatment LPHW Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chilled Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steam and condensate . . . . . . . . . . . . . . . . . . . . . . . . . . . .

596,000 573,000 346,000

39.73 38.20 23.07

Ventilating Services Ventilation, comfort cooling and air conditioning . . . . . . . . . . .

1,939,000

129.27

. . . . . . . . . . .

34,000 403,000 485,000 334,000 580,000 577,000 169,000 206,000 191,000 33,000 174,000

2.27 26.87 32.33 22.27 38.67 38.47 11.27 13.73 12.73 2.20 11.60

5I

Gas Installation Oil Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48,000 98,000

3.20 6.53

5K

Protection Dry risers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lightning Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24,000 6,500

1.60 0.43

Carried forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8,259,500

550.63

5G 5H

Electrical Installation HV Distribution . . . . . . . . . . . . . . . . . . . . . LV supply/distribution . . . . . . . . . . . . . . . . . Standby Power . . . . . . . . . . . . . . . . . . . . . UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General lighting . . . . . . . . . . . . . . . . . . . . . General power . . . . . . . . . . . . . . . . . . . . . Emergency lighting . . . . . . . . . . . . . . . . . . Theatre lighting . . . . . . . . . . . . . . . . . . . . . Specialist lighting . . . . . . . . . . . . . . . . . . . . External lighting . . . . . . . . . . . . . . . . . . . . . Electrical supplies for mechanical equipment

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . .

Approximate Estimating

115

ELEMENTAL COSTS

PRIVATE HOSPITAL – cont’d EI. Ref.

Element

Total Cost £

Brought forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5L

5M

Cost/m² £

8,259,500

550.63

. . . . . .

275,000 170,000 51,500 253,500 65,000 335,500

18.33 11.33 3.43 16.90 4.33 22.37

Special Installation Building management systems . . . . . . . . . . . . . . . . . . . . . . . Pneumatic tube conveying system . . . . . . . . . . . . . . . . . . . . Group 1 Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

587,500 41,500 565,500

39.17 2.77 37.70

Summary total (based on gross floor area) . . . . . . . . . . . . . . . .

10,604,500

706.97

Communication Installation Fire alarms and detection . . . . . . . . . Voice and Data . . . . . . . . . . . . . . . . Security and CCTV . . . . . . . . . . . . . Nurse call and cardiac alarm system Personnel paging . . . . . . . . . . . . . . Hospital radio (entertainment) . . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

116

Approximate Estimating ELEMENTAL COSTS

SCHOOL New build secondary school (Academy) located in Southern England, with a gross internal floor area of 10,000m². The building comprises a three storey teaching block, including provision for music, drama, catering, sports hall, science laboratories, food technology, workshops and reception/admin (BB93 compliant). Excludes IT Cabling Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

5A

Sanitaryware Toilet cores and changing facilities only . . . . . . . . . . . . . . . .

100,000

10.00

5C

Disposal Installations Rainwater installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soil and waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50,000 120,000

5.00 12.00

Water Installations Potable hot and cold water services . . . . . . . . . . . . . . . . . . . Non potable hot and cold water services to labs and art rooms

300,000 100,000

30.00 10.00

Heat Source Gas fired boiler installation . . . . . . . . . . . . . . . . . . . . . . . . . .

200,000

20.00

.. .. ..

400,000 100,000 50,000

40.00 10.00 5.00

..

700,000

70.00

50,000 40,000 80,000

5.00 4.00 8.00

. . . .

300,000 650,000 300,000 20,000

30.00 65.00 30.00 2.00

5I

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

100,000

10.00

5K

Protective Installations Lightning protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20,000

2.00

5L

Communications Installations Containment for telephone, IT data, AV and security systems Fire, smoke detection and alarm system . . . . . . . . . . . . . . . Security installations including CCTV, access control and intruder alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disabled toilet, refuge and induction loop systems . . . . . . . .

. .

30,000 150,000

3.00 15.00

. .

200,000 40,000

20.00 4.00

Special Installations Building Management system – To plant . . . . . . . . . . . . . . . . Building Management system – To opening vents/windows . .

220,000 80,000

22.00 8.00

Summary total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4,400,000

440.00

5D

5E 5F

5G

5H

5M

Space Heating and Air Treatment LTHW Heating system (primary) . . . . . . . . . . . . . . . . . . . . LTHW Heating system (secondary) . . . . . . . . . . . . . . . . . . DX Cooling system to ICT server rooms . . . . . . . . . . . . . . Mechanical supply and extract ventilation including DX type cooling to Music, Drama, Kitchen/Dining and Sports Hall . .

Ventilating Services Toilet extract systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing area extract systems . . . . . . . . . . . . . . . . . . . . . . Extract ventilation from design/food technology and science labs Electrical Installation Mains and sub-mains distribution . . . . . . . . . . . . . . Lighting and luminaries; including emergency fittings Small power installation . . . . . . . . . . . . . . . . . . . . . Earthing and bonding . . . . . . . . . . . . . . . . . . . . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

Approximate Estimating

117

ELEMENTAL COSTS

AFFORDABLE RESIDENTIAL DEVELOPMENT A 12 storey, 50 apartment affordable residential development with a gross internal area of 3,400m² and a net internal area of 2,400m², situated within the London area. The development does not include a car park and is based on 71% efficiency. Based on an individual radiator LTHW system within each apartment, with local gas combi boilers exhausting to building façade. Kitchens and bathrooms are also ventilated to the building façade, there are pendant light fittings, an audio entry system, telephone and satellite installation. Sanitaryware is of lower quality but a disabled refuge alarm is included. Full sprinkler installation installed throughout. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

SHELL & CORE 5A

Sanitaryware

6,000

1.75

5B

Services

-

-

5C

Disposal Installations

45,000

13.24

5D

Water Installations

65,000

19.12

5E

Heat Source

N/A

N/A

5F

Space Heating and Air Treatment

10,000

2.94

5G

Ventilating Services

58,000

17.06

5H

Electrical Installation

107,000

31.47

5I

Gas Installation

5K

Protective Installations

5L

Communications Installations

5M

Special Installations Summary total (based on Gross Internal Area – GIA)

16,000

4.71

103,000

30.29

81,000

23.82

32,000

9.41

523,000

153.81

118

Approximate Estimating ELEMENTAL COSTS

AFFORDABLE RESIDENTIAL DEVELOPMENT – cont’d Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

FITTING OUT 5A

Sanitaryware

5B

Services

57,000

23.75

-

-

5C

Disposal Installations

23,000

9.58

5D

Water Installations

78,000

32.50

5E

Heat Source

68,000

28.33

5F

Space Heating and Air Treatment

73,000

30.42

5G

Ventilating Services

68,000

28.33

5H

Electrical Installation

114,000

47.50

5I

Gas Installation

27,000

11.25

5K

Protective Installations

39,000

16.25

5L

Communications Installations

68,000

28.33

5M

Special Installations

16,000

6.67

631,000

262.92

Summary total (Net Internal Area – NIA) Cost per apartment

£ 12,740

Approximate Estimating

119

ELEMENTAL COSTS

PRIVATE RESIDENTIAL DEVELOPMENT A 20 storey, 250 apartment private residential developments with a gross internal area of 22,750m² and a net internal area of 20,415m², situated within the London area. The development does not include a car park and is based on 90% efficiency. Included is a central boiler and hot water installation with perimeter trench heating to each apartment and 30% LTHW radiators to supplement the 4 pipe fan coil unit installation. Central air cooled chillers system. No gas to apartments. Whole house ventilation system discharging to local façade, wet riser with full sprinkler installation. Video entry and TV and satellite installation. Flood wiring for apartment home automation and sound system. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

SHELL & CORE 5A

Sanitaryware

25,000

1.10

5B

Services

-

-

5C

Disposal Installations

450,000

19.78

5D

Water Installations

575,000

25.27

5E

Heat Source

225,000

9.89

5F

Space Heating and Air Treatment

950,000

41.76

5G

Ventilating Services

200,000

8.79

5H

Electrical Installation

850,000

37.36

5I

Gas Installation

65,000

2.86

5K

Protective Installations

700,000

30.77

5L

Communications Installations

575,000

25.27

5M

Special Installations Summary total (based on Gross Internal Area – GIA)

400,000

17.58

5,015,000

220.43

120

Approximate Estimating ELEMENTAL COSTS

PRIVATE RESIDENTIAL DEVELOPMENT – cont’d Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

FITTING OUT 5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,067,000

52.27

5B

Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

-

-

5C

Disposal Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

175,000

8.57

5D

Water Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

776,000

38.01

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

349,000

17.10

5F

Space Heating and Air Treatment . . . . . . . . . . . . . . . . . . . . . .

2,909,000

142.49

5G

Ventilating Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

679,000

33.26

5H

Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,552,000

76.02

5I

Gas Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

N/A

N/A

5K

Protective Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

194,000

9.50

5L

Communications Installations . . . . . . . . . . . . . . . . . . . . . . . . . .

776,000

38.01

5M

Special Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

58,000

2.84

8,535,000

418.07

Summary total (based on Gross Internal Area – GIA) Cost per apartment

£ 34,140

Approximate Estimating

121

ELEMENTAL COSTS

SUPERMARKET Supermarket located in the South East with a total gross floor area of 4,000m², including a sales area of 2,350m². The building is on one level and incorporates a main sales, coffee shop, bakery, offices and amenities areas and warehouse. Cost Summary EI. Ref.

Element

Total Cost £

Cost/m² £

5A

Sanitaryware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8,000

2.00

5C

Disposal Installations Soil and Waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11,000

2.75

Water Installations Hot and Cold water services . . . . . . . . . . . . . . . . . . . . . . . .

40,000

10.00

5E

Heat Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45,000

11.25

5F

Space Heating and Air Treatment Heating & ventilation with cooling via DX units . . . . . . . . . . .

92,000

23.00

5G

Ventilating Services Supply and extract system . . . . . . . . . . . . . . . . . . . . . . . . . .

60,000

15.00

5H

Electrical Installation Panels / Boards . . . . . . . . . Containment . . . . . . . . . . . General lighting . . . . . . . . . Small power . . . . . . . . . . . Mechanical Services wiring

. . . . .

106,000 7,500 110,000 40,000 8,000

26.50 1.88 27.50 10.00 2.00

Gas Installation Gas mains services to plantroom . . . . . . . . . . . . . . . . . . . . .

12,000

3.00

Protection Sprinklers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lightning protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

128,000 3,400

32.00 0.85

. . . .

29,000 52,000 78,000 15,700

7.25 13.00 19.50 3.93

................................

30,000

7.50

117,000 117,000 43,000 319,000

29.25 29.25 10.75 79.75

1,471,600

367.90

5D

5I 5K

5L

5M

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

Communication Installation Fire alarms, detection and public address . CCTV . . . . . . . . . . . . . . . . . . . . . . . . . . . Intruder alarm, detection and store security Telecom and structured cabling . . . . . . . . Special Installations BMS Installation . Refrigeration Installation . . . . Plant . . . . . . . . Cold Store . . . . Cabinets . . . . . Summary total

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . . .

. . . .

. . . .

. . . .

122

Approximate Estimating ELEMENTAL COSTS

DISTRIBUTION CENTRE Distribution centre located in London with a total gross floor area of 75,000m², including a refrigerated cold box of 17,500m². The building is on one level and incorporates a office area, vehicle recovery unit, gate house and plantrooms. Cost Summary EI. Ref. 5C

5D 5F

5G 5H

5I 5K

5L

5M

Element

Total Cost £

Cost/m² £

Disposal Installations Soil and Waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

159,000 514,000

2.12 6.85

Water Installations Hot and Cold water services . . . . . . . . . . . . . . . . . . . . . . . .

137,000

1.83

Space Heating and Air Treatment Heating with ventilation to offices, displacement system to main warehouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,773,000

23.64

Ventilating Services Smoke extract system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

397,000

5.29

. . . . .

1,203,000 1,390,000 861,000 790,000 959,000

16.04 18.53 11.48 10.53 12.79

Gas Installation Gas mains services to plantroom . . . . . . . . . . . . . . . . . . . . .

45,000

0.60

Protection Sprinklers including racking protection . . . . . . . . . . . . . . . . . Lightning protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3,517,000 8,000

46.89 0.11

Communication Installation Fire alarms, detection and public address . . . . . . . . . . . . . . . CCTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

895,000 575,000

11.93 7.67

447,000

5.96

Electrical Installation Generator . . . . . . . . . . Main HV installation . . . MV distribution . . . . . . Lighting installation . . . Small power installation

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

Special Installations BMS Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Refrigeration Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Summary total

2,859,000

38.12

16,529,000

220.39

Approximate Estimating

123

ELEMENTAL COSTS

DATA CENTRE New build data centre located in the London area/proximity to M25. Net Technical Area (NTA) provided at 2,000m² with typically other areas of 250m² office space, 250m² ancillary space and 1,000m² internal plant. Total GIA 3,500m² Power and cooling to Technical Space @ 1,500w/m². Cost/m² against Nett Technical Area – NTA. Cost Summary EI. Ref. 5C

5D 5F

Element

Total Cost £

Cost/m² £

Disposal Installations Soil & Waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rainwater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Condensate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29,955 19,950 19,950

14.96 9.98 9.98

Water Installations Hot and Cold water services . . . . . . . . . . . . . . . . . . . . . . . .

49,875

24.94

756,000

378.00

1,396,500

698.25

700,000 145,950

350.00 72.98

877,800

438.90

1,300,000

650.00

Space Heating and Air Treatment Chilled water plant with redundancy of N+1 to provide 1,000w/m² net technical space cooling . . . . . . . . . . . . . . . . . . . . . . . . . Chilled water distribution to data centre to free standing cooling units and distribution to ancillary office and workshop/build areas Freestanding cooling units with redundancy of N+20% to technical space and switchrooms. Based on single coil cooling units 30% of units with humidification . . . . . . . . . . . . . . . . . . Floor grilles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5G

Ventilating Services Supply and extract ventilation systems to data centre, switchrooms and ancillary spaces including dedicated gas extract and hot aisle extract system . . . . . . . . . . . . . . . . . . .

5H

Electrical Installation Main HV installations including transformers with redundant capacity of N+1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LV distribution including cabling and busbar installations to provide full system – System dual supplies/redundancy including supplies to mechanical services, office and ancillary areas . . .

1,449,000

724.50

Generator Installation Standby rated containerised generators with redundant capacity of N+1 and including synchronisation panel, 72 hours bulk fuel store and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,840,000

920.00

Uninterruptible Power Supplies Static UPS to provide 2 x (N+1) system redundancy with 10 minute battery autonomy . . . . . . . . . . . . . . . . . . . . . . . . .

2,016,000

1,008.00

Carried Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10,600,980

5,300.49

124

Approximate Estimating ELEMENTAL COSTS

DATA CENTRE – cont’d Element

Total Cost £

EI. Ref. Brought Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5H

10,600,980

5,300.49

1,700,000

850.00

1,560,000

780.00

542,100

271.05

199,500

99.75

. . . .

498,750 29,925 59,850 29,925

249.38 14.96 29.93 14.96

..... areas ..... .....

259,350

129.68

329,175 279,300

164.59 139.65

Special Installations Building Management System . . . . . . . . . . . . . . . . . . . . . . . PLC/Electrical monitoring system . . . . . . . . . . . . . . . . . . . . .

548,625 498,750

274.31 249.38

Summary total (Based on Nett Technical Area – NTA) . . . . . . .

17,136,230

8,568.12

Electrical Installation – cont’d LV Switchgear Incoming LV switchgear, UPS input and output boards for electrical and mechanical services systems . . . . . . . . . . . . . . . Power Distribution Units (PDUs) PDUs to provide a redundant capacity of 2 Nr PDU to include static transfer switch and isolating transformer . . . . . . . . . . . . . Cabinet Supplies A & B supply cables from PDUs to a BS4343 socket fixed under raised floor adjacent cabinet positions . . . . . . . . . . . . . . . . . . Lighting Installation Lighting to technical, workshop and plant areas including office/ ancillary spaces and external areas . . . . . . . . . . . . . . . . . . .

5I

Gas Installation (Assumed not required)

5K

Protective Installations Gaseous suppression to technical areas and switchrooms Lightning protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . Earthing and clean earth . . . . . . . . . . . . . . . . . . . . . . . . Leak detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5L

5M

Cost/m² £

Communications Installation Fire, smoke detection and alarm system . . Very early smoke detection alarm (VESDA) CCTV installations . . . . . . . . . . . . . . . . . . Access control installations . . . . . . . . . . .

......... to technical ......... .........

. . . .

. . . .

Approximate Estimating

125

ELEMENTAL COSTS

BUILDING MANAGEMENT INSTALLATIONS EI. Ref.

Element

Total Cost £

Cost/Point £

Category A Fit Out Option 1 – 189 nr four pipe fan coil – 756 points 1.0

2.0

3.0

4.0

Field Equipment Network devices Valves/actuators Sensing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53,000

70.11

Cabling Power – from local isolator to DDC controller Control – from DDC controller to field equipment . . . . . . . . . .

30,000

39.68

Programming Software – central facility Software – network devices Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16,500

21.83

On site testing and commissioning Equipment Programming/graphics Power and control cabling . . . . . . . . . . . . . . . . . . . . . . . . . .

17,000

22.49

Total Option 1 – Four pipe fan coil (On Point Basis) . . . . . . . . .

116,500

154.10

Field Equipment Network devices Valves/actuators/thyristors Sensing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68,000

89.95

Cabling Power – from local isolator to DDC controller Control – from DDC controller to field equipment . . . . . . . . . .

31,500

41.67

Programming Software – central facility Software – network devices Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16,500

21.83

On site testing and commissioning Equipment Programming/graphics Power and control cabling . . . . . . . . . . . . . . . . . . . . . . . . . .

17,500

23.15

Total Option 2 – Two pipe fan coil with electric heating (On Point Basis) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

133,500

176.59

Category A Fit Out Option 2 – 189 nr two pipe fan coil system with electric heating – 756 points 1.0

2.0

3.0

4.0

126

Approximate Estimating ELEMENTAL COSTS

BUILDING MANAGEMENT INSTALLATIONS – cont’d EI. Ref.

Element

Total Cost £

Cost/Point £

Category A Fit Out Option 3 – 180 Nr Chilled Beams with perimeter heating – 567 points 1.0

Field Equipment Network devices Valves/actuators Sensing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48,000

84.66

2.0

Cabling Power – from local isolator to DDC controller Control – from DDC controller to field equipment . . . . . . . . . .

33,000

43.65

3.0

Programming Software – central facility Software – network devices Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16,500

29.10

4.0

On site testing and commissioning Equipment Programming/graphics Power and control cabling . . . . . . . . . . . . . . . . . . . . . . . . . .

17,500

30.86

Total Option 3 – Chilled beams with perimeter heating (On Point Basis) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

115,000

202.82

400,000

334.45

415,000

346.99

395,000

392.25

1.0 2.0 3.0

Combined Shell & Core and Fit Out Option 1 – 4 pipe fan coil – 1196 points Shell and core and Category A Fit out . . . . . . . . . . . . . . . . . . . . Option 2 – 2 pipe fan coil with electrical heating – 1196 points Shell and core and Category A Fit out . . . . . . . . . . . . . . . . . . . . Option 3 – Chilled beams with perimeter heating – 1007 points Shell and core and Category A Fit out . . . . . . . . . . . . . . . . . . .

PART THREE

Material Costs/Measured Work Prices

Mechanical Installations R: Disposal Systems R10: Rainwater Pipework/Gutters R11: Above Ground Drainage

135 155

S: Piped Supply Systems S10: Cold Water S11: Hot Water S32: Natural Gas S41: Fuel Oil Storage/Distribution S60: Fire Hose Reels S61: Dry Risers S63: Sprinklers S65: Fire Hydrants

180 235 239 243 244 245 246 252

T: Mechanical/Cooling/Heating Systems T10: Gas/Oil Fired Boilers T13: Packaged Steam Generators T31: Low Temperature Hot Water Heating T33: Steam Heating T42: Local Heating Units T60: Central Refrigeration Plant T61: Chilled Water T70: Local Cooling Units

254 267 268 349 352 353 361 367

U: Ventilation/Air Conditioning Systems U10: General Ventilation U14: Ductwork: Fire Rated U30: Low Velocity Air Conditioning U31: VAV Air Conditioning U41: Fan Coil Air Conditioning U70: Air Curtains

369 457 476 479 480 484

128

Material Costs/Measured Work Prices

Electrical Installations V: Electrical Supply/Power/Lighting Systems V10: Electrical Generation Plant V11: HV Supply V20: LV Distribution V21: General Lighting V22: General LV Power V32: Uninterruptible Power Supply V40: Emergency Lighting

490 492 496 564 572 580 582

W: Communications/Security/Control W10: Telecommunications W20: Radio/Television W23: Clocks W30: Data Transmission W40: Access Control W41: Security Detection and Alarm W50: Fire Detection and Alarm W51: Earthing and Bonding W52: Lightning Protection W60: Central Control/Building Managemen

587 589 591 592 598 599 600 603 604 608

Mechanical Installations

Material Costs/Measured Work Prices

DIRECTIONS The following explanations are given for each of the column headings and letter codes. Unit

Prices for each unit are given as singular (i.e. 1 metre, 1 nr) unless stated otherwise.

Net price

Industry tender prices, plus nominal allowance for fixings (unless measured separately), waste and applicable trade discounts.

Material cost

Net price plus percentage allowance for overheads, profit and preliminaries.

Labour norms

In man-hours for each operation.

Labour cost

Labour constant multiplied by the appropriate all-in man-hour cost based on gang rate. (See also relevant Rates of Wages Section) plus percentage allowance for overheads, profit and preliminaries.

Measured work Price (total rate)

Material cost plus Labour cost.

MATERIAL COSTS The Material Costs given are based at Second Quarter 2009 but exclude any charges in respect of VAT. Users of the book are advised to register on the SPON’s website www.pricebooks.co.uk/updates to receive the free quarterly updates – alerts will then be provided by e-mail as changes arise. MEASURED WORK PRICES These prices are intended to apply to new work in the London area. The prices are for reasonable quantities of work and the user should make suitable adjustments if the quantities are especially small or especially large. Adjustments may also be required for locality (e.g. outside London – refer to cost indices in approximate estimating section for details of adjustment factors) and for the market conditions e.g. volume of work secured or being tendered) at the time of use. MECHANICAL INSTALLATIONS The labour rate has been based on average gang rates per man hour effective from 6 October 2008. To this rate has been added 7.5% and 5% to cover preliminary items, site and head office overheads together with 2% for profit, resulting in an inclusive rate of £24.64 per man hour. The rate has been calculated on a working year of 2,016 hours; a detailed buildup of the rate is given at the end of these directions.

130

Material Costs/Measured Work Prices

At the time of going to press, the new wage agreement is currently being negotiated. The current Operative Wage Agreement referred to within JCC Letter 93 will remain in force until further notice. Future changes will be published in the free Spon’s quarterly update by registering on their website. DUCTWORK INSTALLATIONS The labour rate basis is as per Mechanical above and to this rate has been added 7.5% plus 12.5% to cover site and head office overheads only (factory overhead is included in the material rate) and preliminary items together with 3% for profit, resulting in an inclusive rate of £24.97 per man hour. The rate has been calculated on a working year of 2,016 hours; a detailed build-up of the rate is given at the end of these directions. In calculating the 'Measured Work Prices' the following assumptions have been made: (a) That the work is carried out as a subcontract under the Standard Form of Building Contract. (b) That, unless otherwise stated, the work is being carried out in open areas at a height which would not require more than simple scaffolding. (c) That the building in which the work is being carried out is no more than six storey’s high. Where these assumptions are not valid, as for example where work is carried out in ducts and similar confined spaces or in multistorey structures when additional time is needed to get to and from upper floors, then an appropriate adjustment must be made to the prices. Such adjustment will normally be to the labour element only. Note: The rates do not include for any uplift applied if the ductwork package is procured via the Mechanical Subcontractor.

Material Costs/Measured Work Prices – Mechanical Installations

131

DIRECTIONS

LABOUR RATE – MECHANICAL The annual cost of a notional twelve man gang FOREMAN

SENIOR

SENIOR

CRAFTSMAN INSTALLER

CRAFTSMAN CRAFTSMAN

MATE

SUB

(Over 18)

TOTALS

(+2 Welding skill) 1 NR Hourly Rate from 6 October 2008

14.71

Working hours per annum per man x Hourly rate x nr of men = £ per annum

Overtime Rate Overtime hours per annum per man x Hourly rate x nr of men = £ per annum Total

Incentive schemes

Daily Travel Time Allowance (15–20 miles

5.00%

1 NR

2 NR

12.66

4 NR

12.16

2 NR

11.16

2 NR

10.11

8.52

1,702.40

1,702.40

1,702.40

1,702.40

1,702.40

1,702.40

25,042.30

21,552.38

41,402.37

75,995.14

20.73

17.84

17.14

15.73

14.26

12.00

313.60

313.60

313.60

313.60

313.60

313.60

8,943.87

7,526.40

34,422.53 29,008.90 227,423.62

6,500.93

5,594.62

10,750.21

19,731.71

31,543.23

27,147.01

52,152.58

95,726.85

1,577.16

1,357.35

2,607.63

4,786.34

2,168.32

1,826.76

9.13

9.13

9.13

9.13

9.13

9.13

59,047.74

43,366.40 36,535.30 286,471.36

14,323.57

each way) Days per annum per man x nr of men = £ per annum

Daily Travel Fare (15–20 miles each way) Days per annum per man x nr of men = £ per annum

224.00

224.00

224.00

224.00

224.00

224.00

2,045.12

2,045.12

4,090.24

8,180.48

4,090.24

4,090.24

10.00

10.00

10.00

10.00

10.00

10.00

224.00

224.00

224.00

224.00

224.00

224.00

2,240.00

2,240.00

4,480.00

8,960.00

4,480.00

4,480.00

52

52

24,541.44

26,880.00

Employers Contributions to EasyBuild Stakeholder Pension (Death and accident cover is provided free): Number of weeks Total weekly £ contribution each £ Contributions/annum

52

52

52

52

5.00

5.00

5.00

5.00

5.00

5.00

260.00

260.00

520.00

1,040.00

520.00

520.00

37,405.51

32,789.48

63,330.44

117,653.67

3,120.00

National Insurance Contributions: Gross pay – subject to NI % of NI Contributions £ Contributions/annum

12.8 3,853.96

12.8 3,263.10

12.8 6,238.40

12.8 11,323.87

54,104.96 46,932.30 12.8 5,057.54

12.8 4,139.44

33,876.30

Material Costs/Measured Work Prices – Mechanical Installations

132

DIRECTIONS

FOREMAN

SENIOR

SENIOR

CRAFTSMAN INSTALLER

CRAFTSMAN CRAFTSMAN (+2 Welding

MATE

SUB

(Over

TOTALS

18)

skill) 1 NR

1 NR

2 NR

4 NR

2 NR

2 NR

Holiday Credit and Welfare contributions: Number of weeks

52

52

52

52

52

52

Total weekly £ contribution each

77.16

67.41

65.10

60.29

55.29

47.71

4,012.32

3,505.32

6,770.40

12,540.32

13.90

11.95

11.41

10.51

9.53

8.02

722.76

621.35

1,186.58

2,186.47

990.88

833.82

X nr of men = £ Contributions/annum

Holiday Top-up Funding including overtime Cost

5,750.16 4,961.84

SUB-TOTAL TRAINING (INCLUDING ANY TRADE REGISTRATIONS) – SAY

MEN ACTUALLY WORKING = 10.5 AVERAGE NR OF HOURS WORKED PER MAN = 2016

37,540.36

6,541.87

433,294.90 1.00%

4,332.95

SEVERANCE PAY AND SUNDRY COSTS – SAY

1.50%

6,564.42

EMPLOYER’S LIABILITY AND THIRD PARTY INSURANCE – SAY

2.00%

8,883.85

ANNUAL COST OF NOTIONAL GANG

453,076.11

THEREFORE ANNUAL COST PER PRODUCTIVE MAN

43,150.11

THEREFORE ALL IN MAN HOURS

21.40

PRELIMINARY ITEMS – SAY

7.50%

SITE AND HEAD OFFICE OVERHEADS – SAY

5.00%

PROFIT – SAY THEREFORE INCLUSIVE MAN HOUR RATE

2.00%

1.64 1.15 0.48 24.64

Notes: (1)

(2) (3) (4) (5) (6) (7) (8)

The following assumptions have been made in the above calculations: (a) The working week of 38 hours i.e. the normal working week as defined by the National Agreement. (b) The actual hours worked are five days of 9 hours each. (c) A working year of 2016 hours. (d) Five days in the year are lost through sickness or similar reason. The incentive scheme addition of 5% is intended to reflect bonus schemes typically in use. National insurance contributions are those effective from 6 April 2008. Calculation is based on employer making regular payment into the holiday pay scheme, allowing savings on NI. Weekly Holiday Credit/Welfare Stamp values are those effective from 6 October 2008. Rates are based from 6 October 2008. Overtime rates are based on Premium Rate 1. Easybuild Stakeholder Pension Contributions effective from 30 June 2008. Fares (New Malden to Waterloo + Zone 1 – Anytime fare) Current at April 2009.

Material Costs/Measured Work Prices – Mechanical Installations

133

DIRECTIONS

LABOUR RATE – DUCTWORK The annual cost of a notional eight man gang FOREMAN

SENIOR

CRAFTSMAN

INSTALLER

CRAFTSMAN 1 NR Hourly Rate from 6 October 2008

14.71

Working hours per annum per man x Hourly rate x nr of men = £ per annum

Overtime Rate Overtime hours per annum per man x hourly rate x nr of men = £ per annum

Total

Incentive schemes

Daily Travel Time Allowance (15–20 miles each way) Days per annum per man x nr of men = £ per annum

Daily Travel Fare (15–20 miles each way) Days per annum per man x nr of men = £ per annum

5.00%

1 NR

4 NR

12.16

11.16

2 NR 10.11

1,702.40

1,702.40

1,702.40

1,702.40

25,042.30

20,701.18

75,995.14

34,422.53

20.73

17.14

15.73

14.26

313.60

313.60

313.60

313.60

6,500.93

5,375.10

19,731.71

8,943.87

31,543.23

26,076.29

1,577.16

1,303.81

4,786.34

2,168.32

9.13

9.13

9.13

9.13

95.726.85 43,366.40

224

224

224

224

2,045.12

2,045.12

8,140.48

4,090.24

10.00

10.00

SUB TOTALS

10.00

224

224

224

2,105.60

2,105.60

8,422.40

52

52

52

156,161.15

40.551.62

196,712.77

9,835.64

16,360.96

10.00 224 4.211.20

17,920.00

Employers Contributions to EasyBuild Stakeholder Pension (Death and accident cover is provided free) Number of weeks Total weekly £ contribution each £ Contributions/annum

52

5.00

5.00

5.00

5.00

260.00

260.00

1,040.00

520.00

37,405.51

31,665.22

117,635.67

54,104.96

2,080.00

National Insurance Contributions: Gross pay – subject to NI % of NI Contributions £ Contributions/annum

12.8 3,853.96

12.8 3,119.20

12.8 11,323.87

12.8 5,057.54

23,354.56

Material Costs/Measured Work Prices – Mechanical Installations

134

DIRECTIONS

FOREMAN

SENIOR

CRAFTSMAN

INSTALLER

CRAFTSMAN 1 NR

1 NR

SUB TOTALS

4 NR

2 NR

Holiday Credit and Welfare contributions: Number of weeks

52

52

52

52

Total weekly £ contribution each

77.16

65.10

60.29

55.29

4,012.32

3,385.20

12,540.32

5,750.16

13.90

11.41

10.51

9.53

722.76

593.29

2,186.47

990.88

x nr of men = £ Contributions/annum Holiday Top-up Funding including overtime Cost

SUB-TOTAL

25,688.00

4,493.40

296,445.33

TRAINING (INCLUDING ANY TRADE REGISTRATIONS) – SAY

1.00%

2,964.45

SEVERANCE PAY AND SUNDRY COSTS – SAY

1.50%

4,491.15

EMPLOYER'S LIABILITY AND THIRD PARTY INSURANCE – SAY

2.00%

6,078.02

MEN ACTUALLY WORKING = 7.5

ANNUAL COST OF NOTIONAL GANG

309,978.95

THEREFORE ANNUAL COST PER

41,330.53

PRODUCTIVE MAN AVERAGE NR OF HOURS WORKED PER MAN =

2016

THEREFORE ALL IN MAN HOURS

20.50

PRELIMINARY ITEMS – SAY

12.50%

SITE AND HEAD OFFICE OVERHEADS – SAY

7.50%

1.73

PROFIT – SAY

3.00%

0.74

THEREFORE INCLUSIVE MAN HOUR RATE

2.56

25.54

Notes: (1)

(2) (3) (4) (5) (6) (7) (8)

The following assumptions have been made in the above calculations: (a) The working week of 38 hours i.e. the normal working week as defined by the National Agreement. (b) The actual hours worked are five days of 9 hours each. (c) A working year of 2016 hours. (d) Five days in the year are lost through sickness or similar reason. The incentive scheme addition of 5% is intended to reflect bonus schemes typically in use. National insurance contributions are those effective from 6 April 2008. Calculation is based on employer making regular payment into the holiday pay scheme, allowing savings on NI. Weekly Holiday Credit/Welfare Stamp values are those effective from 1 October 2008. Rates are based from 6 October 2008. Fares (New Malden to Waterloo + Zone 1 – Anytime fare) current at April 2009. Easybuild Stakeholder Pension Contributions effective from 30 June 2008. Overtime rates are based on Premium Rate 1.

Material Costs/Prices for Measured Works – Mechanical Installations

135

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS PVC-U gutters: push fit joints; fixed with brackets to backgrounds; BS 4576 BS EN 607 Half round gutter, with brackets measured separately 75mm 100 mm 150mm

3.12 2.75 7.23

3.59 3.17 8.32

0.69 0.64 0.82

17.00 15.77 20.20

m m m

20.59 18.93 28.53

Brackets: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 75mm; Fascia 100mm; Jointing 100mm; Support 150mm; Fascia

1.22 1.94 0.79 2.37

1.40 2.23 0.91 2.73

0.15 0.16 0.16 0.16

3.70 3.94 3.94 3.94

nr nr nr nr

5.10 6.18 4.85 6.67

Bracket supports: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Side rafter Top rafter Rise and fall

3.10 3.10 3.36

3.57 3.57 3.87

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

7.51 7.51 7.81

1.82 1.94 6.88

2.10 2.23 8.32

0.19 0.24 0.28

4.68 5.91 6.90

nr nr nr

6.78 8.15 15.22

4.18 2.86 13.37 3.20

4.81 3.29 15.39 3.68

0.12 0.12 0.12 0.12

2.96 2.96 2.96 2.96

nr nr nr nr

7.77 6.25 18.35 6.64

Internal stop ends: short 75mm 100mm 150mm

1.82 0.92 4.82

3.14 2.11 5.55

0.09 0.09 0.09

2.22 2.22 2.22

nr nr nr

5.36 4.32 7.77

External stop ends: short 75mm 100mm 150mm

3.62 1.43 4.82

4.17 11.04 5.55

0.09 0.09 0.09

2.22 2.22 2.22

nr nr nr

6.39 13.26 7.77

4.94 4.94 3.25 3.77 3.77 21.29 23.03 12.22

5.69 5.69 3.93 4.34 4.34 24.51 26.52 14.07

0.20 0.20 0.20 0.20 0.20 0.23 0.23 0.20

4.93 4.93 4.93 4.93 4.93 5.67 5.67 4.93

nr nr nr nr nr nr nr nr

10.62 10.62 8.86 9.27 9.27 30.18 32.18 19.00

Extra over fittings half round PVC-U gutter Union 75mm 100mm 150mm Rainwater pipe outlets Running: 75 x 53mm dia Running: 100 x 68mm dia Running: 150 x 110mm dia Stop end: 100 x 68mm dia

Angles 75mm; 45° 75mm; 90° 100mm; 90° 100mm; 120° 100mm; 135° 100mm; Prefabricated to special angle 100mm; Prefabricated to raked angle 150mm; 90°

136

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings half round PVC-U gutter – cont'd Gutter adaptors 100mm; Stainless steel clip 100mm; Cast iron spigot 100mm; Cast iron socket 100mm; Cast iron "ogee" spigot 100mm; Cast iron "ogee" socket 100mm; Half round to Square PVC-U 100mm; Gutter overshoot guard

1.75 4.81 4.81 4.88 4.88 8.73 10.80

2.01 5.54 5.54 5.62 5.62 10.05 12.43

0.16 0.23 0.23 0.23 0.23 0.23 0.58

3.94 5.67 5.67 5.67 5.67 5.67 14.29

nr nr nr nr nr nr nr

5.96 11.20 11.20 11.29 11.29 15.72 26.72

Square gutter, with brackets measured separately 120mm

2.95

3.40

0.82

20.20

m

23.60

Brackets: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Jointing Support

2.03 0.89

2.34 1.02

0.16 0.16

3.94 3.94

nr nr

6.28 4.97

Bracket support: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Side rafter Top rafter Rise and fall

3.10 3.10 3.36

3.57 3.57 3.87

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

7.51 7.51 7.81

Rainwater pipe outlets Running: 62mm square Stop end: 62mm square

2.87 3.25

3.30 3.74

0.12 0.12

2.96 2.96

nr nr

6.26 6.70

Stop ends: short External

1.49

1.72

0.09

2.22

nr

3.93

Angles 90° 120° 135° Prefabricated to special angle Prefabricated to raked angle

3.51 8.79 4.11 21.83 26.91

4.24 10.63 4.97 25.13 30.98

0.20 0.20 0.20 0.23 0.23

4.93 4.93 4.93 5.67 5.67

nr nr nr nr nr

9.17 15.55 9.90 30.80 36.65

Gutter adaptors Cast iron

14.01

16.13

0.23

5.67

nr

21.80

Extra over fittings square PVC-U gutter

Material Costs/Prices for Measured Works – Mechanical Installations

137

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

High capacity square gutter, with brackets measured separately 137mm

6.73

7.75

0.82

20.20

m

27.95

Brackets: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Jointing Support Overslung

5.98 2.49 2.32

7.23 3.01 2.80

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

11.17 6.95 6.75

Bracket supports: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Side rafter Top rafter Rise and fall

3.74 3.74 6.01

4.31 4.31 6.92

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

8.25 8.25 10.86

10.48 10.48 9.17

12.07 12.07 10.56

0.12 0.12 0.12

2.96 2.96 2.96

nr nr nr

15.02 15.02 13.51

Screwed outlet adaptor 75mm square pipe

6.67

7.68

0.23

5.67

nr

13.35

Stop ends: short External

3.62

4.17

0.09

2.22

nr

6.39

8.58 10.09 30.62 53.31 53.31

10.37 12.20 35.25 61.38 61.38

0.20 0.20 0.23 0.23 0.23

4.93 4.93 5.67 5.67 5.67

nr nr nr nr nr

15.30 17.13 40.92 67.04 67.04

Deep eliptical gutter, with brackets measured separately 137mm

3.58

4.12

0.82

20.20

m

24.33

Brackets: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Jointing Support

2.70 1.15

3.26 1.39

0.16 0.16

3.94 3.94

nr nr

7.21 5.33

Bracket support: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Side rafter Top rafter Rise and fall

3.74 3.74 6.01

4.52 4.52 7.27

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

8.46 8.46 11.21

Extra over fittings high capacity square UPV-C Rainwater pipe outlets Running: 75mm square Running: 82mm dia Running: 110mm dia

Angles 90° 135° Prefabricated to special angle Prefabricated to raked internal angle Prefabricated to raked external angle

138

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings deep eliptical PVC-U gutter Rainwater pipe outlets Running: 68mm dia Running: 82mm dia Stop end: 68mm dia

4.29 4.28 4.58

5.19 4.93 5.27

0.12 0.12 0.12

2.96 2.96 2.96

nr nr nr

8.14 7.88 8.23

Stop ends: short External

2.20

2.53

0.09

2.22

nr

4.75

4.34 5.15 15.06

5.25 6.23 18.21

0.20 0.20 0.23

4.93 4.93 5.67

nr nr nr

10.17 11.15 23.87

Gutter adaptors Stainless steel clip Marley deepflow

3.88 3.13

4.47 3.60

0.16 0.23

3.94 5.67

nr nr

8.41 9.27

Ogee profile PVC-U gutter, with brackets measured separately 122mm

3.77

4.34

0.82

20.20

m

24.54

Brackets: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Jointing Support Overslung

2.94 1.13 1.13

3.38 1.30 1.30

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

7.33 5.24 5.24

Rainwater pipe outlets Running: 68mm dia

4.28

4.93

0.12

2.96

nr

7.88

Stop ends: short Internal/External: left or right hand

2.17

2.50

0.09

2.22

nr

4.72

Angles 90°: internal or external 135°: internal or external

4.34 4.34

5.00 5.00

0.20 0.20

4.93 4.93

nr nr

9.92 9.92

Pipe: circular, with brackets measured separately 53mm 68mm

4.87 5.07

5.61 5.84

0.61 0.61

15.03 15.03

m m

20.64 20.87

Pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 68mm

1.13

1.30

0.16

3.94

nr

5.24

Angles 90° 135° Prefabricated to special angle

Extra over fittings Ogee profile PVC-U gutter

PVC-U rainwater pipe: dry push fit joints; fixed with brackets to backgrounds; BS 4576/ BS EN 607

Material Costs/Prices for Measured Works – Mechanical Installations

139

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Pipe clip adjustable: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 53mm 68mm

1.74 2.43

2.00 2.80

0.16 0.16

3.94 3.94

nr nr

5.95 6.74

Pipe clip drive in: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 68mm

2.73

3.14

0.16

3.94

nr

7.09

1.41

1.62

0.12

2.96

nr

4.58

5.55 19.07

6.39 21.96

0.17 0.17

4.19 4.19

nr nr

10.58 26.14

Access pipe: single socket 68mm

8.86

10.20

0.15

3.70

nr

13.90

Bend: short radius 53mm: 67.5° 68mm: 92.5° 68mm: 112.5°

2.06 2.30 2.03

2.37 2.65 2.34

0.20 0.20 0.20

4.93 4.93 4.93

nr nr nr

7.30 7.58 7.26

Bend: long radius 68mm: 112°

2.87

3.30

0.20

4.93

nr

8.23

Branch 68mm: 92° 68mm: 112°

17.74 17.80

21.45 21.52

0.23 0.23

5.67 5.67

nr nr

27.11 27.19

Double branch 68mm: 112°

36.87

42.45

0.24

5.91

nr

48.36

Shoe 53mm 68mm

3.06 1.64

3.52 1.89

0.12 0.12

2.96 2.96

nr nr

6.48 4.84

Rainwater head: including fixing to backgrounds 68mm

8.86

10.20

0.29

7.15

nr

17.35

Pipe: square, with brackets measured separately 62mm 75mm

3.10 5.90

3.57 6.79

0.45 0.45

11.09 11.09

m m

14.66 17.88

Pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 62mm 75mm

1.04 2.30

1.20 2.65

0.16 0.16

3.94 3.94

nr nr

5.14 6.59

Extra over fittings circular pipework PVC-U Pipe coupler: PVC-U to PVC-U 68mm Pipe coupler: PVC-U to Cast Iron 68mm: to 3" cast iron 68mm: to 3.3/4" cast iron

140

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Pipe: square, with brackets measured separately – cont'd Pipe clip adjustable: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 62mm

3.21

3.70

0.16

3.94

nr

7.64

Pipe coupler: PVC-U to PVC-U 62mm 75mm

1.52 2.37

1.75 2.73

0.20 0.20

4.93 4.93

nr nr

6.68 7.66

Square to circular adaptor: single socket 62mm to 68mm

2.97

3.42

0.20

4.93

nr

8.35

Square to circular adaptor: single socket 75mm to 62mm

3.83

4.41

0.20

4.93

nr

9.34

17.73 18.71

20.41 21.54

0.16 0.16

3.94 3.94

nr nr

24.36 25.48

2.74 2.00 5.00

3.15 2.30 5.76

0.20 0.20 0.20

4.93 4.93 4.93

nr nr nr

8.08 7.23 10.68

Bends: prefabricated special angle 62mm 75mm

17.81 24.75

20.51 28.50

0.23 0.23

5.67 5.67

nr nr

26.17 34.16

Offset 62mm 75mm

4.29 11.82

4.94 13.61

0.20 0.20

4.93 4.93

nr nr

9.87 18.54

Offset: prefabricated special angle 62mm

17.81

20.51

0.23

5.67

nr

26.17

Shoe 62mm 75mm

2.52 4.34

2.90 5.00

0.12 0.12

2.96 2.96

nr nr

5.86 7.95

Branch 62mm 75mm

6.23 30.37

7.17 34.97

0.23 0.23

5.67 5.67

nr nr

12.84 40.63

Double branch 62mm

33.42

38.48

0.24

5.91

nr

44.39

Rainwater head 62mm 75mm

8.04 29.48

9.26 33.94

0.29 3.45

7.15 84.96

nr nr

16.40 118.90

Extra over fittings square pipework PVC-U

Access pipe 62mm 75mm Bends 62mm: 92.5° 62mm: 112.5° 75mm: 112.5°

Material Costs/Prices for Measured Works – Mechanical Installations

141

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

PVC-U rainwater pipe: solvent welded joints; fixed with brackets to backgrounds; BS 4576/ BS EN 607 Pipe: circular, with brackets measured separately 82mm

9.56

11.01

0.35

8.62

m

19.63

Pipe clip: galvanised; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm

3.89

4.48

0.58

14.29

nr

18.77

Pipe clip: galvanised plastic coated; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm

5.38

6.19

0.58

14.29

nr

20.48

Pipe clip: PVC-U including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm

2.89

3.33

0.58

14.29

nr

17.62

Pipe clip: PVC-U adjustable: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm

5.29

6.09

0.58

14.29

nr

20.38

4.85

5.58

0.21

5.17

nr

10.76

Access pipe 82mm

29.85

34.37

0.23

5.67

nr

40.03

Bend 82mm: 92, 112.5 and 135°

12.19

14.03

0.29

7.15

nr

21.18

7.52 9.44

8.66 10.87

0.29 0.32

7.15 7.88

nr nr

15.80 18.75

Branch 82mm: 92, 112.5 and 135°

18.16

20.91

0.35

8.62

nr

29.53

Rainwater head 82mm 110mm

15.93 14.51

18.34 16.71

0.58 0.58

14.29 14.29

nr nr

32.63 31.00

Roof outlets: 178 dia; Flat 50mm 82mm

15.92 15.92

18.33 18.33

1.15 1.15

28.33 28.33

nr nr

46.66 46.66

Extra over fittings circular pipework PVC-U Pipe coupler: PVC-U to PVC-U 82mm

Shoe 82mm 110mm

142

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings circular pipework PVC-U – cont'd Roof outlets: 178mm dia; Domed 50mm 82mm

15.92 15.92

18.33 18.33

1.15 1.15

28.33 28.33

nr nr

46.66 46.66

Roof outlets: 406mm dia; Flat 82mm 110mm

31.12 31.12

35.83 35.83

1.15 1.15

28.33 28.33

nr nr

64.16 64.16

Roof outlets: 406mm dia; Domed 82mm 110mm

31.12 31.12

35.83 35.83

1.15 1.15

28.33 28.33

nr nr

64.16 64.16

Roof outlets: 406mm dia; Inverted 82mm 110mm

68.50 68.50

78.87 78.87

1.15 1.15

28.33 28.33

nr nr

107.20 107.20

Roof outlets: 406mm dia; Vent Pipe 82mm 110mm

44.99 44.99

51.80 51.80

1.15 1.15

28.33 28.33

nr nr

80.13 80.13

Balcony outlets: screed 82mm

26.63

30.66

1.15

28.33

nr

58.99

Balcony outlets:asphalt 82mm

26.49

30.50

1.15

28.33

nr

58.83

3.56 3.56

4.10 4.10

0.21 0.21

5.17 5.17

nr nr

9.27 9.27

Half round gutter, with brackets measured separately 100 mm 115 mm 125 mm 150 mm

12.52 13.05 15.27 26.10

14.41 15.02 17.58 30.05

0.85 0.97 0.97 1.12

20.94 23.90 23.90 27.59

m m m m

35.36 38.92 41.48 57.64

Brackets; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Fascia 100 mm 115 mm 125 mm 150 mm

2.93 2.93 2.93 3.72

3.37 3.37 3.37 4.28

0.16 0.16 0.16 0.16

3.94 3.94 3.94 3.94

nr nr nr nr

7.32 7.32 7.32 8.22

Adaptors 82mm x 62mm square pipe 82mm x 68mm circular pipe For 110mm diameter pipework and fittings refer to R11: Above Ground Drainage Cast iron gutters: mastic and bolted joints; BS 460; fixed with brackets to backgrounds

Material Costs/Prices for Measured Works – Mechanical Installations

143

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Rise and fall 100 mm 115 mm 125 mm 150 mm

5.83 5.83 5.99 6.10

6.71 6.71 6.90 7.02

0.39 0.39 0.39 0.39

9.61 9.61 9.61 9.61

nr nr nr nr

16.32 16.32 16.51 16.63

Top rafter 100 mm 115 mm 125 mm 150 mm

3.59 3.59 4.86 6.60

4.13 4.13 5.60 7.60

0.16 0.16 0.16 0.16

3.94 3.94 3.94 3.94

nr nr nr nr

8.08 8.08 9.54 11.54

Side rafter 100 mm 115 mm 125 mm 150 mm

3.59 3.59 4.86 6.60

4.13 4.13 5.60 7.60

0.16 0.16 0.16 0.16

3.94 3.94 3.94 3.94

nr nr nr nr

8.08 8.08 9.54 11.54

6.88 8.59 9.71 10.89

7.92 9.89 11.18 12.54

0.39 0.48 0.48 0.55

9.61 11.83 11.83 13.55

nr nr nr nr

17.53 21.72 23.01 26.09

Stop end; internal 100 mm 115 mm 125 mm 150 mm

3.51 4.54 4.54 6.31

4.04 5.23 5.23 7.26

0.12 0.15 0.15 0.20

2.96 3.70 3.70 4.93

nr nr nr nr

7.00 8.92 8.92 12.19

Stop end; external 100 mm 115 mm 125 mm 150 mm

3.51 4.45 4.54 6.31

4.04 5.12 5.23 7.26

0.12 0.15 0.15 0.20

2.96 3.70 3.70 4.93

nr nr nr nr

7.00 8.82 8.92 12.19

90° angle; single socket 100 mm 115 mm 125 mm 150 mm

10.44 10.74 12.66 23.14

12.02 12.37 14.58 26.64

0.39 0.43 0.43 0.50

9.61 10.59 10.59 12.32

nr nr nr nr

21.63 22.96 25.17 38.96

90° angle; double socket 100 mm 115 mm 125 mm

12.65 13.42 17.37

14.56 15.45 20.00

0.39 0.43 0.43

9.61 10.59 10.59

nr nr nr

24.17 26.05 30.59

135° angle; single socket 100 mm 115 mm 125 mm 150 mm

10.66 10.76 15.90 23.59

12.27 12.39 18.31 27.16

0.39 0.43 0.43 0.50

9.61 10.59 10.59 12.32

nr nr nr nr

21.88 22.98 28.90 39.48

Extra over fittings half round gutter cast iron BS 460 Union 100 mm 115 mm 125 mm 150 mm

144

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings half round gutter cast iron BS 460 – cont'd Running outlet 65 mm outlet 100 mm 115 mm 125 mm

10.18 11.08 12.66

11.72 12.76 14.58

0.39 0.43 0.43

9.61 10.59 10.59

nr nr nr

21.33 23.35 25.17

75 mm outlet 100 mm 115 mm 125 mm 150 mm

10.18 11.08 12.66 21.93

11.72 12.76 14.58 25.25

0.39 0.43 0.43 0.50

9.61 10.59 10.59 12.32

nr nr nr nr

21.33 23.35 25.17 37.57

100 mm outlet 150 mm

21.93

25.25

0.50

12.32

nr

37.57

Stop end outlet; socket 65 mm outlet 100 mm 115 mm

11.94 13.39

13.75 15.42

0.39 0.43

9.61 10.59

nr nr

23.36 26.01

75 mm outlet 125 mm 150 mm

11.94 25.09

13.75 54.14

0.43 0.50

10.59 12.32

nr nr

24.34 66.45

21.93

25.25

0.50

12.32

nr

37.57

11.94 13.39

13.75 15.42

0.39 0.43

9.61 10.59

nr nr

23.36 26.01

75 mm outlet 125 mm 150 mm

11.94 25.09

13.75 28.89

0.43 0.50

10.59 12.32

nr nr

24.34 41.21

100mm outlet 150 mm

25.09

28.89

0.50

12.32

nr

41.21

Half round; 3 mm thick double beaded gutter, with brackets measured separately 100 mm 115 mm 125 mm

12.75 13.31 15.26

14.68 15.32 17.57

0.85 0.85 0.97

20.94 20.94 23.90

m m m

35.62 36.27 41.47

2.93 2.93 2.93

3.37 3.37 3.37

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

7.32 7.32 7.32

100mm outlet 150 mm Stop end outlet; spigot 65 mm outlet 100 mm 115 mm

Brackets; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Fascia 100 mm 115 mm 125 mm

Material Costs/Prices for Measured Works – Mechanical Installations

145

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over fittings Half Round 3mm thick Gutter BS 460 Union 100 mm 115 mm 125 mm

6.88 8.39 9.71

7.92 9.66 11.18

0.38 0.38 0.43

9.36 9.36 10.59

nr nr nr

17.28 19.02 21.77

Stop end; internal 100 mm 115 mm 125 mm

3.51 4.54 4.56

4.04 5.23 5.25

0.12 0.12 0.15

2.96 2.96 3.70

nr nr nr

7.00 8.18 8.95

Stop end; external 100 mm 115 mm 125 mm

3.51 4.54 4.56

4.04 5.23 5.25

0.12 0.12 0.15

2.96 2.96 3.70

nr nr nr

7.00 8.18 8.95

10.84 10.99 12.66

12.48 12.65 14.58

0.38 0.38 0.43

9.36 9.36 10.59

nr nr nr

21.84 22.02 25.17

10.66 10.74 13.40

12.27 12.37 15.43

0.38 0.38 0.43

9.36 9.36 10.59

nr nr nr

21.64 21.73 26.02

10.93 11.30 13.12

12.58 13.01 15.11

0.38 0.38 0.43

9.36 9.36 10.59

nr nr nr

21.95 22.37 25.70

90° angle; single socket 100 mm 115 mm 125 mm 135° angle; single socket 100 mm 115 mm 125 mm Running outlet 65 mm outlet 100 mm 115 mm 125 mm 75 mm outlet 115 mm 125 mm Stop end outlet; socket 65 mm outlet 100 mm 115 mm 125 mm

11.30 13.12

13.01 15.11

0.38 0.43

9.36 10.59

nr nr

22.37 25.70

11.94 13.39 14.96

13.75 15.42 17.22

0.38 0.38 0.43

9.36 9.36 10.59

nr nr nr

23.11 24.78 27.82

75 mm outlet 125 mm

15.23

17.53

0.43

10.59

nr

28.13

Stop end outlet; spigot 65 mm outlet 100 mm 115 mm 125 mm

11.94 13.39 14.96

13.75 15.42 17.22

0.38 0.38 0.43

9.36 9.36 10.59

nr nr nr

23.11 24.78 27.82

Deep half round gutter, with brackets measured separately 100 x 75 mm 125 x 75 mm

20.96 27.09

24.13 31.19

0.85 0.97

20.94 23.90

m m

45.07 55.09

Brackets; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Fascia 100 x 75 mm 125 x 75 mm

9.90 12.20

11.40 14.05

0.16 0.16

3.94 3.94

nr nr

15.34 17.99

146

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings Deep Half Round Gutter BS 460 Union 100 x 75 mm 125 x 75 mm

11.52 12.20

13.26 14.05

0.38 0.43

9.36 10.59

nr nr

22.63 24.64

Stop end; internal 100 x 75 mm 125 x 75 mm

10.08 12.43

11.61 14.31

0.12 0.15

2.96 3.70

nr nr

14.56 18.01

Stop end; external 100 x 75 mm 125 x 75 mm

10.08 12.43

11.61 14.31

0.12 0.15

2.96 3.70

nr nr

14.56 18.01

90° angle; single socket 100 x 75 mm 125 x 75 mm

28.74 36.48

33.09 42.00

0.38 0.43

9.36 10.59

nr nr

42.45 52.59

28.74 36.48

33.09 42.00

0.38 0.43

9.36 10.59

nr nr

42.45 52.59

28.74 36.48

33.09 42.00

0.38 0.43

9.36 10.59

nr nr

42.45 52.59

75 mm outlet 100 x 75 mm 125 x 75 mm

28.74 26.48

33.09 30.49

0.38 0.43

9.36 10.59

nr nr

42.45 41.08

Stop end outlet; socket 65 mm outlet 100 x 75 mm

38.82

44.69

0.38

9.36

nr

54.06

75 mm outlet 100 x 75 mm 125 x 75 mm

38.82 38.82

44.69 44.69

0.38 0.43

9.36 10.59

nr nr

54.06 55.29

Stop end outlet; spigot 65 mm outlet 100 x 75 mm

38.82

44.69

0.38

9.36

nr

54.06

75 mm outlet 100 x 75 mm 125 x 75 mm

38.82 38.82

44.69 44.69

0.38 0.43

9.36 10.59

nr nr

54.06 55.29

Ogee gutter, with brackets measured separately 100 mm 115 mm 125 mm

13.96 15.36 16.11

16.07 17.68 18.55

0.85 0.97 0.97

20.94 23.90 23.90

m m m

37.02 41.58 42.45

135° angle; single socket 100 x 75 mm 125 x 75 mm Running outlet 65 mm outlet 100 x 75 mm 125 x 75 mm

Material Costs/Prices for Measured Works – Mechanical Installations

147

R: DISPOSAL SYSTEMS

Item

Brackets; fixed to backgrounds.For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Fascia 100 mm 115 mm 125 mm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

3.19 3.19 3.60

3.67 3.67 4.14

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

7.61 7.61 8.09

Union 100 mm 115 mm 125 mm

6.89 8.39 9.71

7.93 9.66 11.18

0.38 0.43 0.43

9.36 10.59 10.59

nr nr nr

17.30 20.25 21.77

Stop end; internal 100 mm 115 mm 125 mm

3.59 4.64 4.64

4.13 5.34 5.34

0.12 0.15 0.15

2.96 3.70 3.70

nr nr nr

7.09 9.04 9.04

Stop end; external 100 mm 115 mm 125 mm

3.59 4.64 4.64

4.13 5.34 5.34

0.12 0.15 0.15

2.96 3.70 3.70

nr nr nr

7.09 9.04 9.04

90° angle; internal 100 mm 115 mm 125 mm

10.89 11.80 12.88

12.54 13.59 14.83

0.38 0.43 0.43

9.36 10.59 10.59

nr nr nr

21.90 24.18 25.42

90° angle; external 100 mm 115 mm 125 mm

10.89 11.80 12.88

12.54 13.59 14.83

0.38 0.43 0.43

9.36 10.59 10.59

nr nr nr

21.90 24.18 25.42

135° angle; internal 100 mm 115 mm 125 mm

11.31 12.05 15.87

13.02 13.87 18.27

0.38 0.43 0.43

9.36 10.59 10.59

nr nr nr

22.38 24.47 28.87

135° angle; external 100 mm 115 mm 125 mm

11.31 12.05 15.87

13.02 13.87 18.27

0.38 0.43 0.43

9.36 10.59 10.59

nr nr nr

22.38 24.47 28.87

Running outlet 65 mm outlet 100 mm 115 mm 125 mm

11.09 11.81 12.88

12.77 13.60 14.83

0.38 0.43 0.43

9.36 10.59 10.59

nr nr nr

22.13 24.19 25.42

75 mm outlet 125 mm

12.88

14.83

0.43

10.59

nr

25.42

Stop end outlet; socket 65 mm outlet 100 mm 115 mm 125 mm

17.52 17.52 17.52

20.17 20.17 20.17

0.38 0.43 0.43

9.36 10.59 10.59

nr nr nr

29.53 30.77 30.77

Extra over fittings Ogee Cast Iron Gutter BS 460

148

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings Ogee Cast Iron Gutter BS 460 – cont'd 75 mm outlet 125 mm

17.52

20.17

0.43

10.59

nr

30.77

Stop end outlet; spigot 65 mm outlet 100 mm 115 mm 125 mm

17.52 17.52 17.52

20.17 20.17 20.17

0.38 0.43 0.43

9.36 10.59 10.59

nr nr nr

29.53 30.77 30.77

75 mm outlet 125 mm

17.52

20.17

0.43

10.59

nr

30.77

Notts Ogee Gutter, with brackets measured separately 115 mm

24.80

28.55

0.85

20.94

m

49.50

Brackets; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Fascia 115 mm

9.67

11.13

0.16

3.94

nr

15.08

11.75

13.53

0.38

9.36

nr

22.89

Stop end; internal 115 mm

9.67

11.13

0.16

3.94

nr

15.08

Stop end; external 115 mm

9.67

11.13

0.16

3.94

nr

15.08

90° angle; internal 115 mm

28.06

32.31

0.43

10.59

nr

42.90

90° angle; external 115 mm

28.06

32.31

0.43

10.59

nr

42.90

135° angle; internal 115 mm

28.59

32.92

0.43

10.59

nr

43.51

135° angle; external 115 mm

28.59

32.92

0.43

10.59

nr

43.51

Running outlet 65 mm outlet 115 mm

33.64

38.73

0.43

10.59

nr

49.33

75 mm outlet 115 mm

33.64

38.73

0.43

10.59

nr

49.33

Extra over fittings Notts Ogee Cast Iron Gutter BS 460 Union 115 mm

Material Costs/Prices for Measured Works – Mechanical Installations

149

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Stop end outlet; socket 65 mm outlet 115 mm

43.31

49.86

0.43

10.59

nr

60.46

Stop end outlet; spigot 65 mm outlet 115 mm

43.31

49.86

0.43

10.59

nr

60.46

No 46 moulded Gutter, with brackets measured separately 100 x 75 mm 125 x 100 mm

23.99 35.17

27.62 40.49

0.85 0.97

20.94 23.90

m m

48.56 64.39

5.35 5.35

6.16 6.16

0.16 0.16

3.94 3.94

nr nr

10.10 10.10

Union 100 x 75 mm 125 x 100 mm

11.30 13.10

13.01 15.08

0.38 0.43

9.36 10.59

nr nr

22.37 25.68

Stop end; internal 100 x 75 mm 125 x 100 mm

10.12 13.10

11.65 15.08

0.12 0.15

2.96 3.70

nr nr

14.61 18.78

Stop end; external 100 x 75 mm 125 x 100 mm

10.12 13.10

11.65 15.08

0.12 0.15

2.96 3.70

nr nr

14.61 18.78

90° angle; internal 100 x 75 mm 125 x 100 mm

26.50 38.08

30.51 43.84

0.38 0.43

9.36 10.59

nr nr

39.87 54.44

90° angle; external 100 x 75 mm 125 x 100 mm

26.50 38.08

30.51 43.84

0.38 0.43

9.36 10.59

nr nr

39.87 54.44

135° angle; internal 100 x 75 mm 125 x 100 mm

27.01 38.08

31.10 43.84

0.38 0.43

9.36 10.59

nr nr

40.46 54.44

135° angle; external 100 x 75 mm 125 x 100 mm

27.01 38.08

31.10 43.84

0.38 0.43

9.36 10.59

nr nr

40.46 54.44

Running outlet 65 mm outlet 100 x 75 mm 125 x 100 mm

27.01 38.08

31.10 43.84

0.38 0.43

9.36 10.59

nr nr

40.46 54.44

75 mm outlet 100 x 75 mm 125 x 100 mm

27.01 38.08

31.10 43.84

0.38 0.43

9.36 10.59

nr nr

40.46 54.44

100 mm outlet 100 x 75 mm 125 x 100 mm

27.01 38.08

31.10 43.84

0.38 0.43

9.36 10.59

nr nr

40.46 54.44

Brackets; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Fascia 100 x 75 mm 125 x 100 mm Extra over fittings

150

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings – cont'd 100 x 75 mm outlet 125 x 100 mm

27.01

31.10

0.43

10.59

nr

41.69

Stop end outlet; socket 65 mm outlet 100 x 75 mm

51.18

58.92

0.38

9.36

nr

68.29

75 mm outlet 125 x 100 mm

51.18

58.92

0.43

10.59

nr

69.52

Stop end outlet; spigot 65 mm outlet 100 x 75 mm

51.18

58.92

0.38

9.36

nr

68.29

75 mm outlet 125 x 100 mm

51.18

58.92

0.43

10.59

nr

69.52

Box gutter, with brackets measured separately 100 x 75 mm

38.89

44.77

0.85

20.94

m

65.72

6.16

7.09

0.16

3.94

nr

11.03

Union 100 x 75 mm

8.18

9.42

0.38

9.36

nr

18.78

Stop end; external 100 x 75 mm

6.16

7.09

0.12

2.96

nr

10.05

90° angle 100 x 75 mm

31.08

35.78

0.38

9.36

nr

45.15

135° angle 100 x 75 mm

31.08

35.78

0.38

9.36

nr

45.15

Running outlet 65 mm outlet 100 x 75 mm

31.08

35.78

0.38

9.36

nr

45.15

75 mm outlet 100 x 75 mm

31.08

35.78

0.38

9.36

nr

45.15

100 x 75 mm outlet 100 x 75 mm

31.08

35.78

0.38

9.36

nr

45.15

Brackets; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Fascia 100 x 75 mm Extra over fittings Box Cast Iron Gutter BS 460

Material Costs/Prices for Measured Works – Mechanical Installations

151

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Cast iron rainwater pipe; dry joints; BS 460; fixed to backgrounds Circular Plain socket pipe, with brackets measured separately 65mm 75 mm 100 mm

22.82 22.82 31.15

26.27 26.27 35.86

0.69 0.69 0.69

17.00 17.00 17.00

m m m

43.27 43.27 52.86

8.34 8.37 8.48

9.60 9.64 9.76

0.29 0.29 0.29

7.15 7.15 7.15

nr nr nr

16.75 16.78 16.91

24.39 24.39 32.74

28.08 28.08 37.69

0.62 0.62 0.62

15.28 15.28 15.28

m m m

43.36 43.36 52.97

5.38 5.48 3.88

6.19 6.31 4.47

0.16 0.16 0.16

3.94 3.94 3.94

nr nr nr

10.14 10.25 8.41

Loose sockets Plain socket 65mm 75 mm 100 mm

6.59 6.59 10.20

7.59 7.59 11.74

0.23 0.23 0.23

5.67 5.67 5.67

nr nr nr

13.25 13.25 17.41

Eared socket 65mm 75 mm 100 mm

9.54 9.54 12.88

10.98 10.98 14.83

0.29 0.29 0.29

7.15 7.15 7.15

nr nr nr

18.13 18.13 21.97

Shoe; front projection Plain socket 65mm 75 mm 100 mm

20.52 20.52 27.66

23.63 23.63 31.85

0.23 0.23 0.23

5.67 5.67 5.67

nr nr nr

29.29 29.29 37.51

Eared socket 65mm 75 mm 100 mm

23.78 23.78 31.56

27.38 27.38 36.34

0.29 0.29 0.29

7.15 7.15 7.15

nr nr nr

34.52 34.52 43.48

Access Pipe 65mm 75 mm 100 mm 100 mm; eared

37.04 38.89 68.98 77.88

42.65 44.77 79.42 89.67

0.23 0.23 0.23 0.29

5.67 5.67 5.67 7.15

nr nr nr nr

48.31 50.44 85.09 96.81

Bracket; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 65mm 75 mm 100 mm Eared socket pipe, with wall spacers measured separately 65mm 75 mm 100 mm Wall spacer plate; eared pipework 65mm 75 mm 100 mm Extra over fittings Circular Cast Iron Pipework BS 460

152

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings Circular Cast Iron Pipework BS 460 – cont'd Bends; any degree 65mm 75 mm 100 mm

14.82 17.66 24.95

17.06 20.33 28.73

0.23 0.23 0.23

5.67 5.67 5.67

nr nr nr

22.73 26.00 34.39

Branch 92.5° 65mm 75 mm 100 mm

28.59 31.53 36.75

32.92 36.30 42.31

0.29 0.29 0.29

7.15 7.15 7.15

nr nr nr

40.06 43.45 49.46

112.5° 65mm 75 mm

28.59 31.53

32.92 36.30

0.29 0.29

7.15 7.15

nr nr

40.06 43.45

135° 65mm 75 mm

28.59 31.53

32.92 36.30

0.29 0.29

7.15 7.15

nr nr

40.06 43.45

Offsets 75 to 150 mm projection 65mm 75 mm 100 mm

22.27 22.27 42.01

25.64 25.64 48.37

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

31.80 31.80 54.53

225 mm projection 65mm 75 mm 100 mm

22.70 22.70 42.01

26.14 26.14 48.37

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

32.29 32.29 54.53

305 mm projection 65mm 75 mm 100 mm

30.37 31.88 51.88

34.97 36.70 59.73

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

41.13 42.86 65.89

380 mm projection 65mm 75 mm 100 mm

60.60 60.60 82.72

69.77 69.77 95.24

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

75.93 75.93 101.40

455 mm projection 65mm 75 mm 100 mm

70.94 70.94 102.88

81.67 81.67 118.45

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

87.83 87.83 124.61

64.49

74.25

1.04

25.62

m

99.87

Rectangular Plain socket 100 x 75 mm

Material Costs/Prices for Measured Works – Mechanical Installations

153

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Bracket; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 100 x 75mm; build in holdabat 100 x 75mm; trefoil earband 100 x 75mm; plain earband

36.70 29.24 28.28

42.25 33.66 32.56

0.35 0.29 0.29

8.62 7.15 7.15

nr nr nr

50.88 40.81 39.70

Eared Socket, with wall spacers measured separately 100 x 75 mm

65.55

75.47

1.16

28.58

m

104.05

3.88

4.47

0.16

3.94

nr

8.41

Loose socket 100 x 75 mm; plain 100 x 75 mm; eared

27.35 45.32

31.49 52.18

0.23 0.29

5.67 7.15

nr nr

37.16 59.32

Shoe; front 100 x 75 mm; plain 100 x 75 mm; eared

72.55 88.65

83.53 102.06

0.23 0.29

5.67 7.15

nr nr

89.20 109.21

Shoe; side 100 x 75 mm; plain 100 x 75 mm; eared

88.02 110.05

101.34 126.70

0.23 0.29

5.67 7.15

nr nr

107.01 133.85

Bends; side; any degree 100 x 75 mm; plain 100 x 75 mm; 135°; plain

66.76 68.19

76.86 78.51

0.25 0.25

6.16 6.16

nr nr

83.02 84.67

Bends; side; any degree 100 x 75 mm; eared

84.41

97.18

0.25

6.16

nr

103.34

Bends; front; any degree 100 x 75 mm; plain 100 x 75 mm; eared

63.22 71.64

72.79 82.48

0.25 0.25

6.16 6.16

nr nr

78.95 88.64

Offset; side; Plain socket 75mm projection 115mm projection 225mm projection 305mm projection

87.95 91.48 113.97 131.35

101.26 105.32 131.22 151.23

0.25 0.25 0.25 0.25

6.16 6.16 6.16 6.16

nr nr nr nr

107.42 111.48 137.38 157.39

Offset; front Plain socket 75mm projection 150mm projection 225mm projection 305mm projection

66.92 73.96 91.55 108.92

77.05 85.15 105.40 125.40

0.25 0.25 0.25 0.25

6.16 6.16 6.16 6.16

nr nr nr nr

83.21 91.31 111.56 131.56

Eared socket 75mm projection 150mm projection 225mm projection 305mm projection

85.60 92.31 109.19 127.04

98.55 106.28 125.71 146.26

0.25 0.25 0.25 0.25

6.16 6.16 6.16 6.16

nr nr nr nr

104.71 112.44 131.87 152.42

Wall spacer plate; eared pipework 100 x 75 Extra over fittings Rectangular Cast Iron Pipework BS 460

Material Costs/Prices for Measured Works – Mechanical Installations

154

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R10: RAINWATER PIPEWORK/GUTTERS – cont'd Extra over fittings Rectangular Cast Iron Pipework BS 460 – cont'd Offset; plinth 115mm projection; plain 115mm projection; eared

69.07 88.95

79.52 102.41

0.25 0.25

6.16 6.16

nr nr

85.68 108.57

Flat hopper 210 x 160 x 185 mm; 65 mm outlet 210 x 160 x 185 mm; 75 mm outlet 250 x 215 x 215 mm; 100 mm outlet

52.55 52.55 62.28

60.50 60.50 71.70

0.40 0.40 0.40

9.86 9.86 9.86

nr nr nr

70.36 70.36 81.56

Flat rectangular 225 x 125 x 125 mm; 65 mm outlet 225 x 125 x 125 mm; 75 mm outlet 280 x 150 x 130 mm; 100 mm outlet

73.06 73.06 100.87

84.12 84.12 116.13

0.40 0.40 0.40

9.86 9.86 9.86

nr nr nr

93.97 93.97 125.99

68.12 68.12 94.88 94.88 94.88 94.88

78.43 78.43 109.24 109.24 109.24 109.24

0.40 0.40 0.40 0.40 0.40 0.40

9.86 9.86 9.86 9.86 9.86 9.86

nr nr nr nr nr nr

88.28 88.28 119.09 119.09 119.09 119.09

68.12

78.43

0.40

9.86

nr

88.28

Rainwater heads

Rectangular 250 x 180 250 x 180 300 x 250 300 x 250 300 x 250 300 x 250

x x x x x x

175mm; 175mm; 200mm; 200mm; 200mm; 200mm;

75 mm outlet 100 mm outlet 65 mm outlet 75 mm outlet 100 mm outlet 100 x 75 mm outlet

Castellated rectangular 250 x 180 x 175mm; 65 mm outlet

Material Costs/Prices for Measured Works – Mechanical Installations

155

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE Pricing note: degree angles are only indicated where material prices differ PVC-U overflow pipe; solvent welded joints; fixed with clips to backgrounds Pipe, with brackets measured separately 19mm

1.04

1.20

0.21

5.17

m

6.37

0.41

0.47

0.18

4.43

nr

4.91

Straight coupler 19mm

1.11

1.28

0.17

4.19

nr

5.47

Bend 19mm: 91.25° 19mm: 135°

1.31 1.32

1.51 1.52

0.17 0.17

4.19 4.19

nr nr

5.70 5.71

Tee 19mm

1.43

1.65

0.18

4.43

nr

6.08

Reverse nut connector 19mm

0.52

0.60

0.15

3.70

nr

4.29

BSP adaptor: solvent welded socket to threaded socket 19mm x 3/4"

1.90

2.19

0.14

3.45

nr

5.64

Straight tank connector 19mm 32mm 40mm

1.73 0.85 0.85

1.99 0.98 0.98

0.21 0.28 0.30

5.17 6.90 7.39

nr nr nr

7.17 7.88 8.37

Bent tank connector 19mm

2.05

2.36

0.21

5.17

nr

7.53

27.07

31.17

0.38

9.36

nr

40.53

1.65 2.05 3.09

1.90 2.36 3.56

0.23 0.23 0.26

5.67 5.67 6.41

m m m

7.57 8.03 9.96

Fixings Pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 19mm Extra over fittings overflow pipework PVC-U

Tundish 19mm MuPVC waste pipe; solvent welded joints; fixed with clips to backgrounds; BS 5255 Pipe, with brackets measured separately 32mm 40mm 50mm

156

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Fixings Pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 32mm 40mm 50mm

0.34 0.39 0.52

0.39 0.45 0.60

0.13 0.13 0.13

3.20 3.20 3.20

nr nr nr

3.59 3.65 3.80

Pipe clip: expansion: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 32mm 40mm 50mm

0.41 0.43 0.99

0.47 0.50 1.14

0.13 0.13 0.13

3.20 3.20 3.20

nr nr nr

3.67 3.70 4.34

Pipe clip: metal; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 32mm 40mm 50mm

1.48 1.76 2.24

1.70 2.03 2.58

0.13 0.13 0.13

3.20 3.20 3.20

nr nr nr

4.91 5.23 5.78

Screwed access plug 32mm 40mm 50mm

0.96 0.96 1.38

1.11 1.11 1.59

0.18 0.18 0.25

4.43 4.43 6.16

nr nr nr

5.54 5.54 7.75

Straight coupling 32mm 40mm 50mm

1.03 1.03 1.88

1.19 1.19 2.16

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

7.84 7.84 8.82

Expansion coupling 32mm 40mm 50mm

1.82 2.19 2.97

2.10 2.52 3.42

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

8.75 9.17 10.07

MuPVC to copper coupling 32mm 40mm 50mm

1.82 2.19 2.97

2.10 2.52 3.42

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

8.75 9.17 10.07

Spigot and socket coupling 32mm 40mm 50mm

1.82 2.19 2.97

2.10 2.52 3.42

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

8.75 9.17 10.07

Union 32mm 40mm 50mm

4.32 5.66 6.45

4.97 6.52 7.43

0.28 0.28 0.28

6.90 6.90 6.90

nr nr nr

11.87 13.42 14.32

Extra over fittings waste pipework MuPVC

Material Costs/Prices for Measured Works – Mechanical Installations

157

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Reducer: socket 32 x 19mm 40 x 32mm 50 x 32mm 50 x 40mm

1.56 1.03 1.49 1.82

1.80 1.19 1.72 2.10

0.27 0.27 0.27 0.27

6.65 6.65 6.65 6.65

nr nr nr nr

8.45 7.84 8.37 8.75

Reducer: level invert 40 x 32mm 50 x 32mm 50 x 40mm

1.29 1.59 1.59

1.49 1.83 1.83

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

8.14 8.48 8.48

Swept bend 32mm 32mm: 165° 40mm 40mm: 165° 50mm 50mm: 165°

1.05 1.09 1.17 2.06 2.05 2.72

1.21 1.25 1.35 2.37 2.36 3.13

0.27 0.27 0.27 0.27 0.30 0.30

6.65 6.65 6.65 6.65 7.39 7.39

nr nr nr nr nr nr

7.86 7.91 8.00 9.02 9.75 10.52

Knuckle bend 32mm 40mm

0.96 1.06

1.11 1.22

0.27 0.27

6.65 6.65

nr nr

7.76 7.87

Spigot and socket bend 32mm 32mm: 150° 40mm 50mm

1.72 1.78 1.97 2.80

1.98 2.05 2.27 3.22

0.27 0.27 0.27 0.30

6.65 6.65 6.65 7.39

nr nr nr nr

8.63 8.70 8.92 10.62

Swept tee 32mm: 91.25° 32mm: 135° 40mm: 91.25° 40mm: 135° 50mm

1.41 1.69 1.79 2.23 3.49

1.62 1.95 2.06 2.57 4.02

0.31 0.31 0.31 0.31 0.31

7.64 7.64 7.64 7.64 7.64

nr nr nr nr nr

9.26 9.58 9.70 10.21 11.66

Swept cross 40mm: 91.25° 50mm: 91.25° 50mm: 135°

4.34 4.55 5.74

5.00 5.24 6.61

0.31 0.43 0.31

7.64 10.59 7.64

nr nr nr

12.63 15.83 14.25

Male iron adaptor 32mm 40mm

1.57 1.84

1.81 2.12

0.28 0.28

6.90 6.90

nr nr

8.71 9.02

Female iron adaptor 32mm 40mm 50mm

1.84 1.84 2.65

2.12 2.12 3.05

0.28 0.28 0.31

6.90 6.90 7.64

nr nr nr

9.02 9.02 10.69

Reverse nut adaptor 32mm 40mm

2.35 2.35

2.71 2.71

0.20 0.20

4.93 4.93

nr nr

7.63 7.63

13.17 13.17 13.17

15.16 15.16 15.16

0.27 0.28 0.31

6.65 6.90 7.64

nr nr nr

21.82 22.06 22.80

Automatic air admittance valve 32mm 40mm 50mm

158

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Extra over fittings waste pipework MuPVC – cont'd MuPVC to metal adpator: including heat shrunk joint to metal 50mm

5.67

6.53

0.38

9.36

nr

15.89

Caulking bush: including joint to metal 32mm 40mm 50mm

2.47 2.47 2.47

2.84 2.84 2.84

0.31 0.31 0.32

7.64 7.64 7.88

nr nr nr

10.48 10.48 10.73

Weathering apron 50mm

2.18

2.51

0.65

16.02

nr

18.52

Vent Cowl 50mm

2.48

2.86

0.19

4.68

nr

7.54

1.62 2.02 2.55

1.87 2.33 2.94

0.23 0.23 0.26

5.67 5.67 6.41

m m m

7.53 7.99 9.34

Pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 32mm 40mm 50mm

0.26 0.33 0.98

0.30 0.38 1.13

0.17 0.17 0.17

4.19 4.19 4.19

nr nr nr

4.49 4.57 5.32

Pipe clip: expansion: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 32mm 40mm 50mm

0.26 0.33 0.98

0.30 0.38 1.13

0.17 0.17 0.17

4.19 4.19 4.19

nr nr nr

4.49 4.57 5.32

Pipe clip: metal; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 32mm 40mm 50mm

1.48 1.76 2.24

1.70 2.03 2.58

0.17 0.17 0.17

4.19 4.19 4.19

nr nr nr

5.89 6.21 6.77

1.01 1.01 2.09

1.16 1.16 2.41

0.18 0.18 0.25

4.43 4.43 6.16

nr nr nr

5.60 5.60 8.57

ABS waste pipe; solvent welded joints; fixed with clips to backgrounds; BS 5255 Pipe, with brackets measured separately 32mm 40mm 50mm Fixings

Extra over fittings waste pipework ABS Screwed access plug 32mm 40mm 50mm

Material Costs/Prices for Measured Works – Mechanical Installations

159

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Straight coupling 32mm 40mm 50mm

1.01 1.01 2.09

1.16 1.16 2.41

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

7.82 7.82 9.06

Expansion coupling 32mm 40mm 50mm

2.09 2.09 3.20

2.41 2.41 3.68

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

9.06 9.06 10.34

ABS to Copper coupling 32mm 40mm 50mm

2.09 2.09 3.20

2.41 2.41 3.68

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

9.06 9.06 10.34

Reducer: socket 40 x 32mm 50 x 32mm 50 x 40mm

1.01 2.30 2.30

1.16 2.65 2.65

0.27 0.27 0.27

6.65 6.65 6.65

nr nr nr

7.82 9.30 9.30

Swept bend 32mm 40mm 50mm

1.01 1.01 2.09

1.16 1.16 2.41

0.27 0.27 0.30

6.65 6.65 7.39

nr nr nr

7.82 7.82 9.80

Knuckle bend 32mm 40mm

1.01 1.01

1.16 1.16

0.27 0.27

6.65 6.65

nr nr

7.82 7.82

Swept tee 32mm 40mm 50mm

1.46 1.46 3.83

1.68 1.68 4.41

0.31 0.31 0.31

7.64 7.64 7.64

nr nr nr

9.32 9.32 12.05

Swept cross 40mm 50mm

4.88 5.57

5.62 6.41

0.23 0.43

5.67 10.59

nr nr

11.29 17.01

Male iron adaptor 32mm 40mm

2.09 2.09

2.41 2.41

0.28 0.28

6.90 6.90

nr nr

9.31 9.31

Female iron adapator 32mm 40mm 50mm

2.09 2.09 3.13

2.41 2.41 3.60

0.28 0.28 0.31

6.90 6.90 7.64

nr nr nr

9.31 9.31 11.24

Tank connectors 32mm 40mm

1.45 1.59

1.67 1.83

0.29 0.29

7.15 7.15

nr nr

8.81 8.98

Caulking bush: including joint to pipework 50mm

2.47

2.84

0.50

12.32

nr

15.16

160

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Fixings Polypropylene waste pipe; push fit joints; fixed with clips to backgrounds; BS 5254 Pipe, with brackets measured separately 32mm 40mm 50mm

0.89 1.10 1.83

1.02 1.27 2.11

0.21 0.21 0.38

5.17 5.17 9.36

m m m

6.20 6.44 11.47

Pipe clip: saddle; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 32mm 40mm

0.30 0.30

0.35 0.35

0.17 0.17

4.19 4.19

nr nr

4.53 4.53

Pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 50mm

0.72

0.83

0.17

4.19

nr

5.02

Screwed access plug 32mm 40mm 50mm

0.85 0.85 1.46

0.98 0.98 1.68

0.16 0.16 0.20

3.94 3.94 4.93

nr nr nr

4.92 4.92 6.61

Straight coupling 32mm 40mm 50mm

0.85 0.85 1.46

0.98 0.98 1.68

0.19 0.19 0.20

4.68 4.68 4.93

nr nr nr

5.66 5.66 6.61

Universal waste pipe coupler 32mm dia. 40mm dia.

1.44 1.63

1.66 1.88

0.20 0.20

4.93 4.93

nr nr

6.59 6.80

Reducer 40 x 32mm 50 x 32mm 50 x 40mm

1.46 1.52 1.57

1.68 1.75 1.81

0.19 0.19 0.20

4.68 4.68 4.93

nr nr nr

6.36 6.43 6.74

Swept bend 32mm 40mm 50mm

0.85 0.85 1.46

0.98 0.98 1.68

0.19 0.19 0.20

4.68 4.68 4.93

nr nr nr

5.66 5.66 6.61

Knuckle bend 32mm 40mm 50mm

0.85 0.85 1.46

0.98 0.98 1.68

0.19 0.19 0.20

4.68 4.68 4.93

nr nr nr

5.66 5.66 6.61

Spigot and socket bend 32mm 40mm

0.85 0.85

0.98 0.98

0.19 0.19

4.68 4.68

nr nr

5.66 5.66

Extra over fittings waste pipework polypropylene

Material Costs/Prices for Measured Works – Mechanical Installations

161

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Swept tee 32mm 40mm 50mm

0.93 0.93 1.57

1.07 1.07 1.81

0.22 0.22 0.23

5.42 5.42 5.67

nr nr nr

6.49 6.49 7.47

Male iron adaptor 32mm 40mm 50mm

0.85 0.85 1.46

0.98 0.98 1.68

0.13 0.19 0.15

3.20 4.68 3.70

nr nr nr

4.18 5.66 5.38

Tank connector 32mm 40mm 50mm

0.85 0.85 1.46

0.98 0.98 1.68

0.24 0.24 0.35

5.91 5.91 8.62

nr nr nr

6.89 6.89 10.30

Tubular P trap; 75mm seal 32mm dia. 40mm dia.

3.45 3.98

3.97 4.58

0.20 0.20

4.93 4.93

nr nr

8.90 9.51

Tubular S trap; 75mm seal 32mm dia. 40mm dia.

4.35 5.12

5.01 5.89

0.20 0.20

4.93 4.93

nr nr

9.94 10.82

Running tubular P trap; 75mm seal 32mm dia. 40mm dia.

5.29 5.78

6.09 6.65

0.20 0.20

4.93 4.93

nr nr

11.02 11.58

Running tubular S trap; 75mm seal 32mm dia. 40mm dia.

6.36 6.86

7.32 7.90

0.20 0.20

4.93 4.93

nr nr

12.25 12.83

Spigot and socket bend; converter from P to S Trap 32mm 40mm

1.35 1.45

1.55 1.67

0.20 0.21

4.93 5.17

nr nr

6.48 6.84

Bottle P trap; 75mm seal 32mm dia. 40mm dia.

3.84 4.59

4.42 5.28

0.20 0.20

4.93 4.93

nr nr

9.35 10.21

Bottle S trap; 75mm seal 32mm dia. 40mm dia.

4.63 5.63

5.33 6.48

0.20 0.25

4.93 6.16

nr nr

10.26 12.64

Bottle P trap; resealing; 75mm seal 32mm dia. 40mm dia.

4.78 5.59

5.50 6.44

0.20 0.25

4.93 6.16

nr nr

10.43 12.60

Bottle S trap; resealing; 75mm seal 32mm dia. 40mm dia.

5.47 6.34

6.30 7.30

0.20 0.25

4.93 6.16

nr nr

11.23 13.46

Bath trap, low level; 38mm seal 40mm dia.

4.79

5.51

0.25

6.16

nr

11.67

Polypropylene traps; including fixing to appliance and connection to pipework; BS 3943

162

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Polypropylene traps; including fixing to appliance and connection to pipework; BS 3943 – cont'd Bath trap, low level; 38mm seal complete with overflow hose 40mm dia.

7.41

8.53

0.25

6.16

nr

14.69

Bath trap; 75mm seal complete with overlow hose 40mm dia.

7.38

8.50

0.25

6.16

nr

14.66

Bath trap; 75mm seal complete with overflow hose and overflow outlet 40mm dia.

12.59

14.50

0.20

4.93

nr

19.42

Bath trap; 75mm seal complete with overflow hose, overflow outlet and ABS chrome waste 40mm dia.

17.41

20.04

0.20

4.93

nr

24.97

Washing machine trap; 75mm seal including stand pipe 40mm dia.

10.02

11.54

0.25

6.16

nr

17.70

Washing machine standpipe 40mm dia.

5.23

6.02

0.25

6.16

nr

12.18

Plastic unslotted chrome plated basin/sink waste including plug 32mm 40mm

6.30 8.42

7.25 9.69

0.34 0.34

8.38 8.38

nr nr

15.63 18.07

Plastic slotted chrome plated basin/sink waste including plug 32mm 40mm

4.99 8.36

5.75 9.63

0.34 0.34

8.38 8.38

nr nr

14.12 18.00

Bath overflow outlet; plastic; white 42mm

4.38

5.04

0.37

9.12

nr

14.16

Bath overlow outlet; plastic; chrome plated 42mm

5.80

6.68

0.37

9.12

nr

15.79

Combined cistern and bath overflow outlet; plastic; white 42mm

9.01

10.37

0.39

9.61

nr

19.98

Combined cistern and bath overlow outlet; plastic; chrome plated 42mm

9.00

10.36

0.39

9.61

nr

19.97

Cistern overflow outlet; plastic; white 42mm

7.25

8.35

0.15

3.70

nr

12.04

Cistern overlow outlet; plastic; chrome plated 42mm

6.54

7.53

0.15

3.70

nr

11.23

Material Costs/Prices for Measured Works – Mechanical Installations

163

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

PVC-U soil and waste pipe; solvent welded joints; fixed with clips to backgrounds; BS 4514/ BS EN 607 Pipe, with brackets measured separately 82mm 110mm 160mm

7.50 7.64 19.81

8.63 8.80 22.81

0.35 0.41 0.51

8.62 10.10 12.57

m m m

17.26 18.90 35.37

Galvanised steel pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm 110mm 160mm

3.11 3.23 7.77

3.58 3.72 8.95

0.18 0.18 0.18

4.43 4.43 4.43

nr nr nr

8.02 8.15 13.38

Plastic coated steel pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm 110mm 160mm

4.36 3.74 7.49

5.02 4.31 8.62

0.18 0.18 0.18

4.43 4.43 4.43

nr nr nr

9.45 8.74 13.06

Plastic pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm 110mm

2.30 2.16

2.65 2.49

0.18 0.18

4.43 4.43

nr nr

7.08 6.92

Plastic coated steel pipe clip: adjustable; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm 110mm

3.52 4.39

4.05 5.05

0.20 0.20

4.93 4.93

nr nr

8.98 9.98

Galvanised steel pipe clip: drive in; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 110mm

6.71

7.73

0.22

5.42

nr

13.15

Straight coupling 82mm 110mm 160mm

3.98 4.97 14.34

4.58 5.72 16.51

0.21 0.22 0.24

5.17 5.42 5.91

nr nr nr

9.76 11.14 22.42

Expansion coupling 82mm 110mm 160mm

5.95 6.09 18.31

6.85 7.01 21.08

0.21 0.22 0.24

5.17 5.42 5.91

nr nr nr

12.02 12.43 26.99

Fixings

Extra over fittings solvent welded pipework PVC-U

164

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Extra over fittings solvent welded pipework PVC-U – cont'd Slip coupling; double ring socket 82mm 110mm 160mm

12.36 15.48 39.63

14.23 17.82 45.63

0.21 0.22 0.24

5.17 5.42 5.91

nr nr nr

19.40 23.24 51.54

120.80 195.27

139.08 224.82

0.45 0.55

11.09 13.55

nr nr

150.17 238.37

Socket reducer 82 to 50mm 110 to 50mm 110 to 82mm 160 to 110mm

6.05 7.54 7.77 15.75

6.97 8.68 8.95 18.13

0.18 0.18 0.22 0.26

4.43 4.43 5.42 6.41

nr nr nr nr

11.40 13.12 14.37 24.54

Socket plugs 82mm 110mm 160mm

4.69 6.86 12.61

5.40 7.90 14.52

0.15 0.20 0.27

3.70 4.93 6.65

nr nr nr

9.10 12.83 21.17

Access door; including cutting into pipe 82mm 110mm 160mm

13.29 13.29 23.75

15.30 15.30 27.34

0.28 0.34 0.46

6.90 8.38 11.33

nr nr nr

22.20 23.68 38.68

Screwed access cap 82mm 110mm 160mm

9.41 11.09 20.88

10.83 12.77 24.04

0.15 0.20 0.27

3.70 4.93 6.65

nr nr nr

14.53 17.70 30.69

Access pipe: spigot and socket 110mm

16.40

18.88

0.22

5.42

nr

24.30

Access pipe: double socket 110mm

16.40

18.88

0.22

5.42

nr

24.30

Swept bend 82mm 110mm 160mm

9.98 11.69 29.11

11.49 13.46 33.52

0.29 0.32 0.49

7.15 7.88 12.07

nr nr nr

18.64 21.34 45.59

Bend; special angle 82mm 110mm 160mm

19.23 22.93 38.71

22.14 26.40 44.57

0.29 0.32 0.49

7.15 7.88 12.07

nr nr nr

29.29 34.28 56.64

Spigot and socket bend 82mm 110mm 110mm: 135° 160mm: 135°

9.66 11.33 12.71 28.15

11.12 13.04 14.63 32.41

0.26 0.32 0.32 0.44

6.41 7.88 7.88 10.84

nr nr nr nr

17.53 20.93 22.52 43.25

Puddle flanges 110mm 160mm

Material Costs/Prices for Measured Works – Mechanical Installations

165

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Variable bend: single socket 110mm

21.91

25.23

0.33

8.13

nr

33.36

Variable bend: double socket 110mm

21.86

25.17

0.33

8.13

nr

33.30

Access bend 110mm

32.42

37.33

0.33

8.13

nr

45.46

Single branch: two bosses 82mm 82mm: 104° 110mm 110mm: 135° 160mm 160mm: 135°

13.95 13.95 15.46 16.12 32.82 32.63

16.06 16.06 17.80 18.56 37.79 37.57

0.35 0.35 0.42 0.42 0.50 0.50

8.62 8.62 10.35 10.35 12.32 12.32

nr nr nr nr nr nr

24.68 24.68 28.15 28.91 50.11 49.89

Single branch; four bosses 110mm

18.82

21.67

0.42

10.35

nr

32.02

Single access branch 82mm 110mm

45.23 26.47

52.07 30.48

0.35 0.42

8.62 10.35

nr nr

60.70 40.82

Unequal single branch 160 x 160 x 110mm 160 x 160 x 110mm: 135°

37.06 39.82

42.67 45.85

0.50 0.50

12.32 12.32

nr nr

54.99 58.16

Double branch 110mm 110mm: 135°

39.94 38.20

45.98 43.98

0.42 0.42

10.35 10.35

nr nr

56.33 54.33

Corner branch 110mm

67.48

77.69

0.42

10.35

nr

88.04

Unequal double branch 160 x 160 x 110mm

69.02

79.46

0.50

12.32

nr

91.78

Single boss pipe; single socket 110 x 110 x 32mm 110 x 110 x 40mm 110 x 110 x 50mm

4.18 4.18 4.40

4.81 4.81 5.07

0.24 0.24 0.24

5.91 5.91 5.91

nr nr nr

10.73 10.73 10.98

Single boss pipe; triple socket 110 x 110 x 40mm

6.78

7.81

0.24

5.91

nr

13.72

Waste boss; including cutting into pipe 82 to 32mm 82 to 40mm 110 to 32mm 110 to 40mm 110 to 50mm 160 to 32mm 160 to 40mm 160 to 50mm

5.46 5.46 5.46 5.46 5.66 7.73 7.73 7.73

6.29 6.29 6.29 6.29 6.52 8.90 8.90 8.90

0.29 0.29 0.29 0.29 0.29 0.30 0.35 0.40

7.15 7.15 7.15 7.15 7.15 7.39 8.62 9.86

nr nr nr nr nr nr nr nr

13.43 13.43 13.43 13.43 13.66 16.29 17.52 18.76

166

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Extra over fittings solvent welded pipework PVC-U – cont'd Self locking waste boss; including cutting into pipe 110 to 32mm 110 to 40mm 110 to 50mm

7.30 7.62 9.85

8.40 8.77 11.34

0.30 0.30 0.30

7.39 7.39 7.39

nr nr nr

15.80 16.16 18.73

Adaptor saddle; including cutting to pipe 82 to 32mm 110 to 40mm 160 to 50mm

3.64 4.49 8.13

4.19 5.17 9.36

0.29 0.29 0.29

7.15 7.15 7.15

nr nr nr

11.34 12.31 16.51

Branch boss adaptor 32mm 40 mm 50 mm

2.17 2.17 3.10

2.50 2.50 3.57

0.26 0.26 0.26

6.41 6.41 6.41

nr nr nr

8.90 8.90 9.98

Branch boss adaptor bend 32mm 40 mm 50 mm

2.97 3.24 3.88

3.42 3.73 4.47

0.26 0.26 0.26

6.41 6.41 6.41

nr nr nr

9.83 10.14 10.87

34.07

39.23

0.19

4.68

nr

43.91

PVC-U to metal adpator: including heat shrunk joint to metal 110mm

9.48

10.91

0.57

14.04

nr

24.96

Caulking bush: including joint to pipework 82mm 110mm

9.34 9.34

10.75 10.75

0.46 0.46

11.33 11.33

nr nr

22.09 22.09

Vent cowl 82mm 110mm 160mm

2.81 2.84 7.44

3.24 3.27 8.57

0.13 0.13 0.13

3.20 3.20 3.20

nr nr nr

6.44 6.47 11.77

Weathering apron; to lead slates 82mm 110mm 160mm

2.81 3.23 9.71

3.24 3.72 11.18

1.15 1.15 1.15

28.33 28.33 28.33

nr nr nr

31.57 32.05 39.51

Weathering apron; to asphalt 82mm 110mm

11.87 11.87

13.67 13.67

1.10 1.10

27.10 27.10

nr nr

40.77 40.77

Weathering slate; flat; 406 x 406mm 82mm 110mm

33.45 33.45

38.51 38.51

1.04 1.04

25.62 25.62

nr nr

64.14 64.14

Weathering slate; flat; 457 x 457mm 82mm 110mm

34.31 34.31

39.50 39.50

1.04 1.04

25.62 25.62

nr nr

65.13 65.13

Automatic air admittance valve 82 to 110mm

Material Costs/Prices for Measured Works – Mechanical Installations

167

R: DISPOSAL SYSTEMS

Item

Weathering slate; angled; 610 x 610mm 82mm 110mm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

46.37 46.37

53.39 53.39

1.04 1.04

25.62 25.62

nr nr

79.01 79.01

6.61 6.66 23.88

7.61 7.67 27.49

0.35 0.41 0.51

8.62 10.10 12.57

m m m

16.23 17.77 40.06

Galvanised steel pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm 110mm 160mm

3.11 3.23 7.77

3.58 3.72 8.95

0.18 0.18 0.18

4.43 4.43 4.43

nr nr nr

8.02 8.15 13.38

Plastic coated steel pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm 110mm 160mm

4.36 3.74 7.49

5.02 4.31 8.62

0.18 0.18 0.18

4.43 4.43 4.43

nr nr nr

9.45 8.74 13.06

Plastic pipe clip: including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm 110mm

2.30 2.16

2.65 2.49

0.18 0.18

4.43 4.43

nr nr

7.08 6.92

Plastic coated steel pipe clip: adjustable; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 82mm 110mm

3.52 4.39

4.05 5.05

0.20 0.20

4.93 4.93

nr nr

8.98 9.98

Galvanised steel pipe clip: drive in; including fixing to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 110mm

6.71

7.73

0.22

5.42

nr

13.15

4.33 4.86 16.40

4.99 5.60 18.88

0.21 0.22 0.24

5.17 5.42 5.91

nr nr nr

10.16 11.02 24.79

PVC-U soil and waste pipe; ring seal joints; fixed with clips to backgrounds; BS 4514/BS EN 607 Pipe, with brackets measured separately 82mm dia. 110mm dia. 160mm dia. Fixings

Extra over fittings ring seal pipework PVC-U Straight coupling 82mm 110mm 160mm

168

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Extra over fittings ring seal pipework PVC-U – cont'd Straight coupling; double socket 82mm 110mm 160mm

7.64 6.94 16.40

8.80 7.99 18.88

0.21 0.22 0.24

5.17 5.42 5.91

nr nr nr

13.97 13.41 24.79

Reducer; socket 82 to 50mm 110 to 50mm 110 to 82mm 160 to 110

7.13 9.94 9.94 14.32

8.21 11.44 11.44 16.49

0.15 0.15 0.19 0.31

3.70 3.70 4.68 7.64

nr nr nr nr

11.90 15.14 16.13 24.12

7.76 9.14

8.93 10.52

0.15 0.17

3.70 4.19

nr nr

12.63 14.71

Access Cap; pressure plug 160mm

21.49

24.74

0.33

8.13

nr

32.87

Access pipe 82mm 110mm 160mm

19.04 19.00 39.91

21.92 21.88 45.95

0.22 0.22 0.24

5.42 5.42 5.91

nr nr nr

27.34 27.30 51.86

Bend 82mm 82mm; adjustable radius 110mm 110mm; adjustable radius 160mm 160mm; adjustable radius

9.68 21.84 10.42 19.44 31.28 41.03

11.14 25.14 12.00 22.38 36.01 47.24

0.29 0.29 0.32 0.32 0.49 0.49

7.15 7.15 7.88 7.88 12.07 12.07

nr nr nr nr nr nr

18.29 32.29 19.88 30.27 48.09 59.31

Bend; spigot and socket 110mm

10.52

12.11

0.32

7.88

nr

20.00

Bend; offset 82mm 110mm 160mm

8.52 13.67 30.17

9.81 15.74 34.74

0.21 0.32 -

5.17 7.88 -

nr nr nr

14.98 23.62 -

Bend; access 110mm

28.69

33.03

0.33

8.13

nr

41.16

Single branch 82mm 110mm 110mm; 45° 160mm

15.20 14.05 14.46 36.24

17.50 16.18 16.65 41.72

0.35 0.42 0.31 0.50

8.62 10.35 7.64 12.32

nr nr nr nr

26.12 26.52 24.29 54.04

Single branch; access 82mm 110mm

22.78 32.98

26.23 37.97

0.35 0.42

8.62 10.35

nr nr

34.85 48.32

Access Cap 82mm 110mm

Material Costs/Prices for Measured Works – Mechanical Installations

169

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Unequal single branch 160 x 160 x 110mm 160 x 160 x 110mm; 45°

37.05 39.82

42.66 45.85

0.50 0.50

12.32 12.32

nr nr

54.98 58.16

Double branch; 4 bosses 110mm

36.80

42.37

0.49

12.07

nr

54.44

Corner branch; 2 bosses 110mm

67.47

77.68

0.49

12.07

nr

89.75

Multibranch; 4 bosses 110mm

20.14

23.19

0.52

12.81

nr

36.00

Boss Branch 110 x 32mm 110 x 40mm

4.17 4.17

4.80 4.80

0.34 0.34

8.38 8.38

nr nr

13.18 13.18

Strap on boss 110 x 32mm 110 x 40mm 110 x 50mm

4.64 4.64 4.68

5.34 5.34 5.39

0.30 0.30 0.30

7.39 7.39 7.39

nr nr nr

12.73 12.73 12.78

Patch boss 82 x 32mm 82 x 40mm 82 x 50mm

5.46 5.46 5.46

6.29 6.29 6.29

0.31 0.31 0.31

7.64 7.64 7.64

nr nr nr

13.92 13.92 13.92

Boss Pipe; collar 4 boss 110mm

6.78

7.81

0.35

8.62

nr

16.43

Boss adaptor; rubber; push fit 32mm 40 mm 50 mm

2.54 2.54 2.87

2.92 2.92 3.30

0.26 0.26 0.26

6.41 6.41 6.41

nr nr nr

9.33 9.33 9.71

7.06 11.35

8.13 13.07

0.23 0.27

5.67 6.65

nr nr

13.80 19.72

2.81 2.84 7.45

3.24 3.27 8.58

0.13 0.13 0.13

3.20 3.20 3.20

nr nr nr

6.44 6.47 11.78

Weathering slate; inclined; 610 x 610mm 82mm 110mm

46.37 46.37

53.39 53.39

1.04 1.04

25.62 25.62

nr nr

79.01 79.01

Weathering slate; inclined; 450 x 450mm 82mm 110mm

34.31 34.31

39.50 39.50

1.04 1.04

25.62 25.62

nr nr

65.13 65.13

Weathering slate; flat; 400 x 400mm 82mm 110mm

33.47 33.47

38.53 38.53

1.04 1.04

25.62 25.62

nr nr

64.16 64.16

Air admittance valve 82mm 110mm

34.07 34.07

39.23 39.23

0.19 0.19

4.68 4.68

nr nr

43.91 43.91

WC connector; cap and seal; solvent socket 110mm 110mm; 90° Vent terminal 82mm 110mm 160mm

170

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Cast iron pipe; nitrile rubber gasket joint with continuity clip BS 416/6087; fixed vertically to backgrounds Pipe, with brackets and jointing couplings measured separately 50 mm 75 mm 100 mm 150 mm

15.76 17.62 21.30 44.48

18.14 20.29 24.52 51.21

0.25 0.45 0.60 0.70

6.16 11.09 14.79 17.25

m m m m

24.30 31.37 39.31 68.47

5.46 5.98 6.13 11.36

6.29 6.88 7.06 13.08

0.15 0.18 0.18 0.20

3.70 4.43 4.43 4.93

nr nr nr nr

9.98 11.32 11.49 18.01

Standard coupling 50 mm 75 mm 100 mm 150 mm

8.16 9.00 11.76 23.48

9.39 10.36 13.54 27.03

0.50 0.60 0.67 0.83

12.32 14.79 16.51 20.46

nr nr nr nr

21.71 25.15 30.05 47.50

Conversion coupling 65 x 75 mm 70 x 75 mm 90 x 100 mm

9.54 9.54 12.29

10.98 10.98 14.15

0.60 0.60 0.67

14.79 14.79 16.51

nr nr nr

25.77 25.77 30.66

Access pipe; round door 50 mm 75 mm 100 mm 150 mm

24.06 34.58 36.35 60.46

27.70 39.81 41.85 69.61

0.41 0.46 0.67 0.83

10.10 11.33 16.53 20.46

nr nr nr nr

37.80 51.15 58.39 90.07

Access pipe; square door 100 mm 150 mm

71.62 109.63

82.46 126.22

0.67 0.83

16.53 20.46

nr nr

98.99 146.68

19.77 25.09 48.85

22.76 28.89 56.24

0.60 0.67 0.83

14.79 16.51 20.46

nr nr nr

37.55 45.40 76.71

4.99 6.23 6.05 8.74

5.75 7.17 6.97 10.06

0.24 0.26 0.32 0.40

5.91 6.41 7.88 9.86

nr nr nr nr

11.66 13.58 14.85 19.92

Fixings Brackets; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book 50 mm 75 mm 100 mm 150 mm Extra over fittings nitrile gasket cast iron pipework BS 416/6087, with jointing couplings measured separately

Taper reducer 75 mm 100 mm 150 mm Blank cap 50 mm 75 mm 100 mm 150 mm

Material Costs/Prices for Measured Works – Mechanical Installations

171

R: DISPOSAL SYSTEMS

Item

Blank cap; 50 mm screwed tapping 75 mm 100 mm 150 mm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

12.28 14.25 15.83

14.14 16.41 18.23

0.26 0.32 0.40

6.41 7.88 9.86

nr nr nr

20.54 24.29 28.08

7.42

8.54

0.33

8.13

nr

16.67

Change piece; BS416 100 mm

15.83

18.23

0.47

11.58

nr

29.81

WC connector 100 mm

25.47

29.32

0.49

12.07

nr

41.40

Boss pipe; 2 " BSPT socket 50 mm 75 mm 100 mm 150 mm

20.34 29.76 35.54 55.38

23.42 34.26 40.92 63.76

0.58 0.65 0.79 0.86

14.29 16.02 19.46 21.19

nr nr nr nr

37.71 50.28 60.38 84.95

Boss pipe; 2 " BSPT socket; 135° 100 mm

42.82

49.30

0.79

19.46

nr

68.76

Boss pipe; 2 x 2 " BSPT socket; opposed 75 mm 100 mm

39.41 45.96

45.37 52.91

0.65 0.79

16.02 19.46

nr nr

61.39 72.38

Boss pipe; 2 x 2 " BSPT socket; in line 100 mm

46.42

53.44

0.79

19.46

nr

72.91

Boss pipe; 2 x 2 " BSPT socket; 90° 100 mm

45.96

52.91

0.79

19.46

nr

72.38

Bend; short radius 50 mm 75 mm 100 mm 100 mm; 11° 100 mm; 67° 150 mm

14.37 16.27 19.89 17.15 19.89 35.54

16.54 18.73 22.90 19.75 22.90 40.92

0.50 0.60 0.67 0.67 0.67 0.83

12.32 14.79 16.51 16.51 16.51 20.46

nr nr nr nr nr nr

28.86 33.52 39.41 36.26 39.41 61.38

Access bend; short radius 50 mm 75 mm 100 mm 100 mm; 45° 150 mm 150 mm; 45°

35.42 38.43 42.09 42.09 59.76 59.76

40.78 44.25 48.46 48.46 68.80 68.80

0.50 0.60 0.67 0.67 0.83 0.83

12.32 14.79 16.51 16.51 20.46 20.46

nr nr nr nr nr nr

53.10 59.03 64.97 64.97 89.27 89.27

Long radius bend 75 mm 100 mm 100 mm; 5° 150 mm 150 mm; 22.5°

27.14 32.22 19.89 70.25 73.64

31.25 37.10 22.90 80.88 84.78

0.60 0.67 0.67 0.83 0.83

14.79 16.51 16.51 20.46 20.46

nr nr nr nr nr

46.03 53.61 39.41 101.35 105.25

Universal connector 50 x 56/48/40 mm

172

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Fixings – cont'd Access bend; long radius 75 mm 100 mm 150 mm

48.17 54.43 95.87

55.46 62.67 110.38

0.60 0.67 0.83

14.79 16.51 20.46

nr nr nr

70.25 79.18 130.84

Long tail bend 100 x 250 mm long 100 x 815 mm long

25.70 81.71

29.59 94.07

0.70 0.70

17.25 17.25

nr nr

46.84 111.33

75 mm projection 75 mm 100 mm

21.22 20.93

24.43 24.10

0.53 0.66

13.06 16.26

nr nr

37.49 40.36

115 mm projection 75 mm 100 mm

23.32 26.15

26.85 30.11

0.53 0.66

13.06 16.26

nr nr

39.91 46.37

150 mm projection 75 mm 100 mm

27.40 27.40

31.55 31.55

0.53 0.66

13.06 16.26

nr nr

44.60 47.81

225 mm projection 100 mm

29.95

34.48

0.66

16.26

nr

50.74

300 mm projection 100 mm

32.22

37.10

0.66

16.26

nr

53.36

Branch; equal and unequal 50 mm 75 mm 100 mm 150 mm 150 x 100 mm; 87.5° 150 x 100 mm; 45°

21.62 24.48 30.75 76.24 58.34 85.57

24.89 28.18 35.40 87.78 67.17 98.52

0.78 0.85 1.00 1.20 1.21 1.21

19.22 20.95 24.64 29.58 29.69 29.69

nr nr nr nr nr nr

44.11 49.13 60.04 117.36 96.86 128.21

Branch; 2" BSPT screwed socket 100 mm

41.20

47.43

1.00

24.64

nr

72.07

Branch; long tail 100 x 915 mm long

85.19

98.08

1.00

24.64

nr

122.72

47.10 47.10 52.95 112.73 94.75 102.70

54.23 54.23 60.96 129.79 109.09 118.24

0.78 0.85 1.02 1.20 1.20 1.20

19.22 20.95 25.14 29.58 29.58 29.58

nr nr nr nr nr nr

73.45 75.18 86.10 159.37 138.67 147.82

32.22

37.10

1.00

24.64

nr

61.73

Offset

Access branch; equal and unequal 50 mm 75 mm 100 mm 150 mm 150 x 100 mm; 87.5° 150 x 100 mm; 45° Parallel branch 100 mm

Material Costs/Prices for Measured Works – Mechanical Installations

173

R: DISPOSAL SYSTEMS

Item

Double branch 75 mm 100 mm 150 x 100 mm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

36.35 38.04 107.12

41.85 43.80 123.33

0.95 1.30 1.56

23.41 32.04 38.44

nr nr nr

65.26 75.84 161.77

Double access branch 100 mm

60.23

69.34

1.43

35.25

nr

104.59

Corner branch 100 mm

54.08

62.26

1.30

32.04

nr

94.30

Puddle flange; grey epoxy coated 100 mm

36.16

41.63

1.00

24.64

nr

66.27

Roof vent connector; asphalt 75 mm 100 mm

44.01 34.36

50.67 39.56

0.90 0.97

22.17 23.90

nr nr

72.84 63.46

P trap 100 mm

31.89

36.72

1.00

24.64

nr

61.35

P trap with access 50 mm 75 mm 100 mm 150 mm

48.80 48.80 54.09 94.45

56.18 56.18 62.28 108.74

0.77 0.90 1.16 1.77

18.97 22.17 28.58 43.61

nr nr nr nr

75.16 78.36 90.86 152.35

Bellmouth gully inlet 100 mm

46.16

53.15

1.08

26.61

nr

79.75

Balcony gully inlet 100 mm

139.36

160.45

1.08

26.61

nr

187.06

Roof outlet Flat grate 75 mm 100 mm

86.03 121.03

99.05 139.34

0.83 1.08

20.45 26.61

nr nr

119.50 165.95

Dome grate 75 mm 100 mm

86.03 135.75

99.05 156.29

0.83 1.08

20.45 26.61

nr nr

119.50 182.90

Top Hat 100 mm

183.79

211.60

1.08

26.61

nr

238.21

11.61 13.44 15.98 25.65 31.66 52.91 73.93 92.07

13.77 15.94 18.95 30.42 37.54 62.74 87.67 109.18

0.25 0.45 0.60 0.65 0.70 1.14 1.25 1.53

6.16 11.09 14.78 16.02 17.25 28.09 30.80 37.70

m m m m m m m m

19.93 27.03 33.73 46.43 54.79 90.83 118.47 146.88

Cast iron pipe; EPDM rubber gasket joint with continuity clip; BS EN877; fixed to backgrounds Pipe, with brackets and jointing couplings measured separately 50 mm 70 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm

174

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Fixings Brackets; fixed to backgrounds. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Ductile iron 50mm 70 mm 100 mm 150 mm 200 mm

4.88 4.88 5.63 10.44 38.74

5.62 5.62 6.48 12.02 44.60

0.10 0.10 0.15 0.20 0.25

2.46 2.46 3.70 4.93 6.16

nr nr nr nr nr

8.08 8.08 10.18 16.95 50.76

9.50

10.94

0.15

3.70

nr

14.63

Mild steel; stand off 250 mm 300 mm

20.70 22.81

23.83 26.26

0.25 0.25

6.16 6.16

nr nr

29.99 32.42

Stack support; rubber seal 70 mm 100 mm 125 mm 150 mm 200 mm

12.53 17.21 18.41 24.95 31.28

14.43 19.81 21.20 28.73 36.01

0.74 0.88 1.00 1.19 1.31

18.23 21.68 24.64 29.32 32.28

nr nr nr nr nr

32.66 41.50 45.83 58.05 68.29

4.15 4.15 4.15

4.78 4.78 4.78

0.10 0.10 0.10

2.46 2.46 2.46

nr nr nr

7.24 7.24 7.24

Coupling 50 mm 70 mm 100 mm 125 mm 150mm 200 mm 250 mm 300 mm

5.22 5.75 7.48 9.29 14.99 33.51 48.00 55.55

6.01 6.62 8.61 10.70 17.26 38.58 55.26 63.96

0.50 0.60 0.67 0.75 0.83 1.21 1.33 1.63

12.32 14.79 16.51 18.49 20.46 29.81 32.77 40.16

nr nr nr nr nr nr nr nr

18.33 21.41 25.12 29.18 37.72 68.39 88.03 104.12

Plain socket 50 mm 70 mm 100 mm

13.10 13.10 15.05

15.08 15.08 17.33

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

21.24 21.24 23.49

Eared socket 50 mm 70 mm 100 mm

13.50 13.50 16.38

15.54 15.54 18.86

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

21.70 21.70 25.02

Mild steel; vertical 125 mm

Wall spacer plate; cast iron (eared sockets) 50 mm 70 mm 100 mm Extra over fittings EPDM rubber jointed cast iron pipework BS EN 877, with jointing couplings measured separately

Material Costs/Prices for Measured Works – Mechanical Installations

175

R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Slip socket 50 mm 70 mm 100 mm

16.97 16.97 19.83

19.54 19.54 22.83

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

25.70 25.70 28.99

Stack support pipe 70 mm 100 mm 125 mm 150 mm 200 mm

19.36 21.53 23.88 34.09 51.28

22.29 24.79 27.49 39.25 59.04

0.74 0.88 1.00 1.19 1.31

18.23 21.68 24.64 29.32 32.28

nr nr nr nr nr

40.52 46.47 52.13 68.57 91.32

Access pipe; round door 50 mm 70 mm 100 mm 150 mm

24.06 25.45 27.98 50.64

27.70 29.30 32.21 58.30

0.54 0.64 0.60 0.83

13.30 15.77 14.78 20.45

nr nr nr nr

41.01 45.07 47.00 78.75

Access pipe; square door 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm

54.11 56.30 84.71 168.28 264.76 330.38

62.30 64.82 97.53 193.75 304.82 380.37

0.60 0.67 0.71 1.21 1.31 1.43

14.78 16.51 17.49 29.81 32.28 35.23

nr nr nr nr nr nr

77.08 81.33 115.02 223.56 337.10 415.61

Taper reducer 70 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm

13.89 16.34 16.41 31.35 50.92 105.17 144.59

15.99 18.81 18.89 36.09 58.63 121.08 166.47

0.51 0.58 0.64 0.67 1.15 1.25 1.37

12.57 14.29 15.77 16.51 28.33 30.80 33.75

nr nr nr nr nr nr nr

28.56 33.10 34.66 52.60 86.96 151.88 200.22

Blank cap 50 mm 70 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm

3.63 3.84 4.46 6.31 6.45 28.49 58.23 82.98

4.18 4.42 5.13 7.26 7.43 32.80 67.04 95.54

0.24 0.26 0.32 0.35 0.40 0.60 0.65 0.72

5.91 6.41 7.88 8.62 9.86 14.78 16.02 17.74

nr nr nr nr nr nr nr nr

10.09 10.83 13.02 15.89 17.28 47.58 83.06 113.28

Blank cap; 50 mm screwed tapping 70 mm 100 mm 150 mm

8.55 9.23 11.10

9.84 10.63 12.78

0.26 0.32 0.40

6.41 7.88 9.86

nr nr nr

16.25 18.51 22.64

Universal connector; EPDM rubber 50 x 56/48/40 mm

7.43

8.55

0.30

7.39

nr

15.95

Blank end; push fit 100 x 38/32 mm

8.29

9.54

0.39

9.61

nr

19.15

176

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Extra over fittings EPDM rubber jointed cast iron pipework BS EN 877, with jointing couplings measured separately – cont'd Boss pipe; 2 " BSPT socket 50 mm 75 mm 100 mm 150 mm

20.34 20.34 24.86 40.54

23.42 23.42 28.62 46.67

0.54 0.64 0.78 1.09

13.30 15.77 19.22 26.86

nr nr nr nr

36.72 39.19 47.84 73.53

Boss pipe; 2 x 2 " BSPT socket; opposed 100 mm

32.12

36.98

0.78

19.22

nr

56.20

Boss pipe; 2 x 2 " BSPT socket; 90° 100 mm

32.12

36.98

0.78

19.22

nr

56.20

Manifold connector 100 mm

49.60

57.11

0.78

19.22

nr

76.32

Bend; short radius 50mm 70mm 100mm 125 mm 150mm 200 mm; 45° 250 mm; 45° 300 mm; 45°

9.04 10.16 12.03 21.33 21.60 64.33 125.54 176.59

10.41 11.70 13.85 24.56 24.87 74.06 144.54 203.31

0.50 0.60 0.67 0.78 0.83 1.21 1.31 1.43

12.32 14.78 16.51 19.22 20.46 29.81 32.28 35.23

nr nr nr nr nr nr nr nr

22.73 26.48 30.36 43.78 45.33 103.88 176.81 238.55

Access bend; short radius 70 mm 100mm 150mm

19.70 28.78 50.63

22.68 33.14 58.29

0.64 0.78 0.83

15.77 19.22 20.46

nr nr nr

38.45 52.35 78.76

Bend; long radius bend 100mm 100 mm; 22° 150mm

30.59 22.55 87.66

35.22 25.96 100.93

0.67 0.78 0.83

16.51 19.22 20.46

nr nr nr

51.73 45.18 121.39

Access bend; long radius 100mm

37.23

42.86

0.67

16.51

nr

59.38

Bend; long tail 100 mm

21.09

24.28

0.78

19.22

nr

43.50

Bend; long tail double 70 mm 100 mm

32.68 36.05

37.63 41.51

0.64 0.78

15.77 19.22

nr nr

53.39 60.72

Bend; air pipe 100 mm

38.00

43.75

0.78

19.22

nr

62.97

18.50

21.30

0.78

19.22

nr

40.52

Offset 75 mm projection 100 mm

Material Costs/Prices for Measured Works – Mechanical Installations

177

R: DISPOSAL SYSTEMS

Item

130 mm projection 50 mm 70 mm 100 mm 125 mm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

15.33 23.22 30.49 38.65

17.65 26.73 35.10 44.50

0.54 0.64 0.78 0.78

13.30 15.77 19.22 19.22

nr nr nr nr

30.95 42.50 54.32 63.72

Branch; equal and unequal 50 mm 70 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300mm

14.48 15.29 19.48 42.05 46.62 125.89 281.80 362.60

16.67 17.60 22.43 48.41 53.67 144.94 324.44 417.47

0.78 0.85 1.00 1.16 1.37 1.51 1.63 1.77

19.22 20.95 24.64 28.58 33.75 37.20 40.16 43.61

nr nr nr nr nr nr nr nr

35.89 38.55 47.07 76.99 87.43 182.14 364.60 461.08

Branch; radius; equal and unequal 70 mm 100 mm 125 mm 150 mm 200 mm

18.64 24.53 42.05 74.53 157.19

21.46 28.24 48.41 85.81 180.98

0.79 0.96 1.16 1.37 1.51

19.46 23.65 28.58 33.75 37.20

nr nr nr nr nr

40.92 51.89 76.99 119.56 218.18

Branch; long tail 100 mm

68.40

78.75

0.96

23.65

nr

102.40

Access branch; radius; equal and unequal 70 mm 100 mm 150 mm

27.32 38.45 86.70

31.45 44.27 99.82

0.79 0.96 1.20

19.46 23.65 29.58

nr nr nr

50.92 67.92 129.40

Double branch; equal and unequal 100mm 100 mm; 69° 150 mm 200 mm

29.09 30.81 109.40 151.23

33.49 35.47 125.95 174.11

1.30 1.30 1.37 1.51

32.04 32.04 33.75 37.20

nr nr nr nr

65.53 67.51 159.71 211.32

Double branch; radius; equal and unequal 100 mm 150 mm 200 mm

26.52 109.06 151.23

30.53 125.56 174.11

1.30 1.37 1.51

32.04 33.75 37.20

nr nr nr

62.57 159.32 211.32

Corner branch 100 mm

51.03

58.75

1.30

32.04

nr

90.79

Corner branch; long tail 100 mm

80.41

92.58

1.30

32.04

nr

124.62

Roof vent connector; asphalt 100 mm

33.91

39.04

0.78

19.22

nr

58.26

Roof vent connector; felt 100 mm

69.21

79.68

0.78

19.22

nr

98.90

Movement connector 100 mm 150 mm

43.07 79.73

49.59 91.80

0.78 0.78

19.22 19.22

nr nr

68.81 111.01

178

Material Costs/Prices for Measured Works – Mechanical Installations R: DISPOSAL SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

R11: ABOVE GROUND DRAINAGE – cont'd Extra over fittings EPDM rubber jointed cast iron pipework BS EN 877, with jointing couplings measured separately – cont'd Expansion plugs 70 mm 100 mm 150 mm

17.55 18.95 28.31

20.21 21.82 32.59

0.32 0.39 0.55

7.88 9.61 13.55

nr nr nr

28.09 31.43 46.15

P trap 100mm dia.

22.34

25.72

1.00

24.64

nr

50.36

P trap with access 50 mm 70 mm 100mm 150 mm

34.11 34.11 36.94 66.05

39.27 39.27 42.53 76.05

0.54 0.64 1.00 1.09

13.30 15.77 24.64 26.86

nr nr nr nr

52.58 55.04 67.17 102.90

Branch trap 100 mm

80.95

93.20

1.17

28.83

nr

122.03

Balcony gully inlet 100 mm

139.36

160.45

1.00

24.64

nr

185.09

Roof outlet Flat grate 70 mm 100 mm

86.03 121.03

99.05 139.34

1.00 1.00

24.64 24.64

nr nr

123.69 163.98

Dome grate 70 mm 100 mm

86.03 135.75

99.05 156.29

1.00 1.00

24.64 24.64

nr nr

123.69 180.93

Top Hat 100 mm

183.79

211.60

1.00

24.64

nr

236.24

81.93 95.34

94.33 109.77

0.50 0.50

12.32 12.32

nr nr

106.65 122.09

91.93 95.34

105.84 109.77

0.50 0.50

12.32 12.32

nr nr

118.16 122.09

81.93 95.34

94.33 109.77

0.50 0.50

12.32 12.32

nr nr

106.65 122.09

91.93

105.84

0.50

12.32

nr

118.16

95.34

109.77

0.50

12.32

nr

122.09

Floor drains; for cast iron pipework BS 416 and BS EN877 Adjustable clamp plate body 100 mm; 165mm nickel bronze grate and frame 100 mm; 165mm nickel bronze rodding eye 100 mm; 150 x 150mm nickel bronze grate and frame 100 mm; 150 x 150 nickel bronze rodding eye Deck plate body 100 mm; 165mm nickel bronze grate and frame 100 mm; 165mm nickel bronze rodding eye 100 mm; 150 x 150mm nickel bronze grate and frame 100 mm; 150 x 150mm nickel bronze rodding eye

Material Costs/Prices for Measured Works – Mechanical Installations

179

R: DISPOSAL SYSTEMS

Item

Extra for 100 mm; Srewed extension piece 100 mm; Grating extension piece; screwed or spigot 100 mm; Brewary trap

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

31.95

36.78

0.30

7.39

nr

44.18

24.24 881.72

27.91 1015.15

0.30 2.00

7.39 49.28

nr nr

35.30 1064.42

180

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER Y10 – PIPELINES COPPER PIPEWORK Copper pipe; capillary or compression joints in the running length; EN1057 R250 (TX) formerly BS 2871 Table X Fixed vertically or at low level, with brackets measured separately 12mm dia. 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

1.31 1.48 2.97 3.76 8.91 10.85 13.95 18.25 25.81 37.13 48.18 76.35

1.51 1.70 3.42 4.33 10.26 12.49 16.06 21.01 29.72 42.75 55.47 87.90

0.39 0.40 0.47 0.51 0.58 0.66 0.72 0.75 0.76 0.78 1.05 1.15

9.61 9.86 11.58 12.57 14.29 16.26 17.74 18.48 18.73 19.22 25.87 28.33

m m m m m m m m m m m m

11.12 11.56 15.00 16.89 24.55 28.75 33.80 39.49 48.44 61.97 81.34 116.24

Fixed horizontally at high level or suspended, with brackets measured separately 12mm dia. 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

1.31 1.48 2.97 3.76 8.91 10.85 13.95 18.25 25.81 37.13 48.18 76.35

1.51 1.70 3.42 8.66 10.26 12.49 16.06 21.01 29.72 42.75 55.47 87.90

0.45 0.46 0.54 0.59 0.67 0.76 0.83 0.86 0.87 0.90 1.21 1.32

11.09 11.33 13.30 14.54 16.51 18.73 20.45 21.19 21.44 22.17 29.81 32.52

m m m m m m m m m m m m

12.60 13.04 16.72 23.19 26.77 31.22 36.51 42.20 51.15 64.92 85.28 120.43

1.70 2.43 4.27 5.52 8.05 9.76 16.64 22.10 25.14 44.85

1.96 2.80 4.92 6.36 9.27 11.24 19.16 25.44 28.94 51.64

0.41 0.43 0.50 0.54 0.62 0.71 0.78 0.82 0.60 0.88

10.10 10.59 12.32 13.30 15.28 17.49 19.22 20.20 14.78 21.68

m m m m m m m m m m

12.06 13.39 17.24 19.66 24.54 28.73 38.38 45.65 43.73 73.32

Copper pipe; capillary or compression joints in the running length; EN1057 R250 (TY) formerly BS 2871 Table Y Fixed vertically or at low level with brackets measured separately (Refer to Copper Pipe Table X Section) 12mm dia. 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

181

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Copper pipe; capillary or compression joints in the running length; EN1057 R250 (TX) formerly BS 2871 Table X Plastic coated gas and cold water service pipe for corrosive environments, fixed vertically or at low level with brackets measured separtely 15mm dia. (white) 22mm dia. (white) 28mm dia. (white)

3.40 6.01 6.20

3.91 6.92 7.14

0.59 0.68 0.74

14.54 16.76 18.24

m m m

18.45 23.68 25.38

Saddle band 6mm dia. 8mm dia. 10mm dia. 12mm dia. 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

0.12 0.12 0.07 0.07 0.07 0.13 0.08 0.24 0.51 0.68

0.14 0.14 0.08 0.08 0.08 0.15 0.09 0.28 0.59 0.78

0.11 0.12 0.12 0.12 0.13 0.13 0.16 0.18 0.21 0.21

2.71 2.96 2.96 2.96 3.20 3.20 3.94 4.43 5.17 5.17

nr nr nr nr nr nr nr nr nr nr

2.85 3.09 3.04 3.04 3.28 3.35 4.03 4.71 5.76 5.96

Single spacing clip 15mm dia. 22mm dia. 28mm dia.

0.14 0.14 0.35

0.16 0.16 0.40

0.14 0.15 0.17

3.45 3.70 4.19

nr nr nr

3.61 3.86 4.59

Two piece spacing clip 8mm dia. Bottom 8mm dia. Top 12mm dia. Bottom 12mm dia. Top 15mm dia. Bottom 15mm dia. Top 22mm dia. Bottom 22mm dia. Top 28mm dia. Bottom 28mm dia. Top 35mm dia. Bottom 35mm dia. Top

0.12 0.12 0.12 0.12 0.13 0.13 0.13 0.14 0.13 0.23 0.14 0.34

0.14 0.14 0.14 0.14 0.15 0.15 0.15 0.16 0.15 0.26 0.16 0.39

0.11 0.11 0.13 0.13 0.13 0.13 0.14 0.14 0.16 0.16 0.21 0.21

2.71 2.71 3.20 3.20 3.20 3.20 3.45 3.45 3.94 3.94 5.17 5.17

nr nr nr nr nr nr nr nr nr nr nr nr

2.85 2.85 3.34 3.34 3.35 3.35 3.60 3.61 4.09 4.21 5.34 5.57

Single pipe bracket 15mm dia. 22mm dia. 28mm dia.

1.18 1.20 1.65

1.36 1.38 1.90

0.14 0.14 0.17

3.45 3.45 4.19

nr nr nr

4.81 4.83 6.09

Fixings For copper pipework

182

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd COPPER PIPEWORK – cont'd For copper pipework – cont'd Single pipe ring 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia.

2.07 2.25 2.82 3.97 4.61 5.90 9.90 20.34 37.43

2.38 2.59 3.25 4.57 5.31 6.79 11.40 23.42 43.09

0.26 0.26 0.31 0.32 0.32 0.34 0.35 0.42 0.42

6.41 6.41 7.64 7.88 7.88 8.38 8.62 10.35 10.35

nr nr nr nr nr nr nr nr nr

8.79 9.00 10.88 12.46 13.19 15.17 20.02 33.77 53.44

Double pipe ring 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia.

2.84 3.55 5.60 7.47 7.47 8.66 10.91 16.55 22.61

3.27 4.09 6.45 8.60 8.60 9.97 12.56 19.05 26.03

0.26 0.26 0.31 0.32 0.32 0.34 0.35 0.42 0.42

6.41 6.41 7.64 7.88 7.88 8.38 8.62 10.35 10.35

nr nr nr nr nr nr nr nr nr

9.68 10.49 14.09 16.48 16.48 18.35 21.18 29.40 36.38

Wall bracket 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

2.35 3.08 3.68 5.52 7.29 11.37

2.71 3.55 4.24 6.36 8.39 13.09

0.05 0.05 0.05 0.05 0.05 0.05

1.23 1.23 1.23 1.23 1.23 1.23

nr nr nr nr nr nr

3.94 4.78 5.47 7.59 9.63 14.32

Hospital bracket 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

4.04 4.78 5.60 5.93 8.48 11.35

4.65 5.50 6.45 6.83 9.76 13.07

0.26 0.26 0.31 0.32 0.32 0.34

6.41 6.41 7.64 7.88 7.88 8.38

nr nr nr nr nr nr

11.06 11.91 14.09 14.71 17.65 21.44

Screw on backplate, female All sizes 15mm to 54mm x 10mm

1.30

1.50

0.10

2.46

nr

3.96

Screw on backplate, male All sizes 15mm to 54mm x 10mm

1.72

1.98

0.10

2.46

nr

4.44

Pipe joist clips, single 15mm dia. 22mm dia.

0.82 0.82

0.94 0.94

0.08 0.08

1.97 1.97

nr nr

2.92 2.92

Pipe joist clips, double 15mm dia. 22mm dia.

1.14 0.62

1.31 0.71

0.08 0.08

1.97 1.97

nr nr

3.28 2.68

Material Costs/Prices for Measured Works – Mechanical Installations

183

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra Over channel sections for fabricated hangers and brackets Galvanised steel; including inserts, bolts, nuts, washers; fixed to backgrounds 41 x 21mm 41 x 41mm

5.08 6.09

5.85 7.01

0.29 0.29

7.15 7.15

m m

12.99 14.16

1.67

1.92

0.18

4.43

nr

6.36

2.57

2.96

0.18

4.43

nr

7.39

Stop end 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

1.19 2.22 3.97 8.76 15.09 21.06

1.37 2.56 4.57 10.09 17.37 24.25

0.13 0.14 0.17 0.19 0.22 0.23

3.20 3.45 4.19 4.68 5.42 5.67

nr nr nr nr nr nr

4.57 6.01 8.76 14.77 22.79 29.91

Straight coupling; copper to copper 6mm dia. 8mm dia. 10mm dia. 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia.

1.25 1.28 0.65 0.14 0.38 1.10 3.58 5.98 11.03 32.75

1.44 1.47 0.75 0.16 0.44 1.27 4.12 6.88 12.70 37.71

0.23 0.23 0.23 0.23 0.26 0.30 0.34 0.38 0.42 0.53

5.67 5.67 5.67 5.67 6.41 7.39 8.38 9.36 10.35 13.06

nr nr nr nr nr nr nr nr nr nr

7.11 7.14 6.42 5.83 6.84 8.66 12.50 16.25 23.05 50.76

Adaptor coupling; imperial to metric 1/2" x 15mm dia. 3/4" x 22mm dia. 1" x 28mm dia. 1 1/4" x 35mm dia. 1 1/2" x 42mm dia.

2.59 2.27 4.46 7.46 9.49

2.98 2.61 5.13 8.59 10.93

0.27 0.31 0.36 0.41 0.46

6.65 7.64 8.87 10.10 11.33

nr nr nr nr nr

9.63 10.25 14.00 18.69 22.26

2.73 4.00 2.16 4.92 3.01 7.10 10.41 18.27 19.94

3.14 4.61 2.49 5.66 3.47 8.17 11.99 21.03 22.96

0.23 0.26 0.27 0.28 0.30 0.34 0.38 0.42 0.42

5.67 6.41 6.65 6.90 7.39 8.38 9.36 10.35 10.35

nr nr nr nr nr nr nr nr nr

8.81 11.01 9.14 12.56 10.86 16.55 21.35 31.38 33.31

Threaded rods; metric thread; including nuts, washers etc 10mm dia x 600mm long for ring clips up to 54mm 12mm dia x 600mm long for ring clips from 54mm Extra over copper pipes; capillary fittings; BS 864

Reducing coupling 15 x 10mm dia. 22 x 10mm dia. 22 x 15mm dia. 28 x 15mm dia. 28 x 22mm dia. 35 x 28mm dia. 42 x 35mm dia. 54 x 35mm dia. 54 x 42mm dia.

184

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd COPPER PIPEWORK – cont'd Extra over copper pipes; capillary fittings; BS 864 – cont'd Straight female connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia.

2.71 3.92 7.41 12.81 16.63 26.37

3.12 4.51 8.53 14.75 19.15 30.36

0.27 0.31 0.36 0.41 0.46 0.52

6.65 7.64 8.87 10.10 11.33 12.81

nr nr nr nr nr nr

9.77 12.15 17.40 24.85 30.48 43.17

Straight male connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia. 67mm x 2 1/2" dia.

2.30 4.12 6.65 11.68 15.04 22.83 36.47

2.65 4.74 7.66 13.45 17.32 26.28 41.99

0.27 0.31 0.36 0.41 0.46 0.52 0.63

6.65 7.64 8.87 10.10 11.33 12.81 15.52

nr nr nr nr nr nr nr

9.30 12.38 16.53 23.55 28.65 39.10 57.51

Female reducing connector 15mm x 3/4" dia.

6.73

7.75

0.27

6.65

nr

14.40

Male reducing connector 15mm x 3/4" dia. 22mm x 1" dia.

6.01 9.16

6.92 10.55

0.27 0.31

6.65 7.64

nr nr

13.57 18.18

42.99 54.43 65.06 98.35 115.65

49.50 62.67 74.91 113.23 133.15

0.36 0.41 0.46 0.52 0.61

8.87 10.10 11.33 12.81 15.03

nr nr nr nr nr

58.37 72.77 86.24 126.04 148.18

Tank connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia.

5.76 8.78 11.54 14.80 19.40 29.65

6.63 10.11 13.29 17.04 22.34 34.14

0.25 0.28 0.32 0.37 0.43 0.46

6.16 6.90 7.88 9.12 10.59 11.33

nr nr nr nr nr nr

12.79 17.01 21.17 26.16 32.93 45.47

Tank connector with long thread 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia.

7.46 10.62 13.14

8.59 12.23 15.13

0.30 0.33 0.39

7.39 8.13 9.61

nr nr nr

15.98 20.36 24.74

Flanged connector 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

185

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Reducer 15 x 10mm 22 x 15mm 28 x 15mm 28 x 22mm 35 x 22mm 42 x 22mm 42 x 35mm 54 x 35mm 54 x 42mm 67 x 54mm

dia. dia. dia. dia. dia. dia. dia. dia. dia. dia.

Material £

Labour hours

Labour £

Unit

Total rate £

0.92 0.64 2.43 1.86 6.89 12.45 9.63 20.21 17.43 23.69

1.06 0.74 2.80 2.14 7.93 14.33 11.09 23.27 20.07 27.27

0.23 0.26 0.28 0.30 0.34 0.36 0.38 0.40 0.42 0.53

5.67 6.41 6.90 7.39 8.38 8.87 9.36 9.86 10.35 13.06

nr nr nr nr nr nr nr nr nr nr

6.73 7.14 9.70 9.53 16.31 23.20 20.45 33.12 30.42 40.33

Adaptor; 15mm 22mm 28mm 35mm 42mm 54mm

copper to female iron x 1/2" dia. x 3/4" dia. x 1" dia. x 1 1/4" dia. x 1 1/2" dia. x 2" dia.

4.66 7.11 10.02 18.13 22.83 27.48

5.37 8.19 11.54 20.87 26.28 31.64

0.27 0.31 0.36 0.41 0.46 0.52

6.65 7.64 8.87 10.10 11.33 12.81

nr nr nr nr nr nr

12.02 15.82 20.41 30.98 37.62 44.45

Adaptor; 15mm 22mm 28mm 35mm 42mm 54mm

copper to male iron x 1/2" dia. x 3/4" dia. x 1" dia. x 1 1/4" dia. x 1 1/2" dia. x 2" dia.

4.76 6.09 10.17 14.81 20.46 27.48

5.48 7.01 11.71 17.05 23.56 31.64

0.27 0.31 0.36 0.41 0.46 0.52

6.65 7.64 8.87 10.10 11.33 12.81

nr nr nr nr nr nr

12.13 14.65 20.58 27.15 34.89 44.45

Union coupling 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia.

6.45 10.32 15.04 19.74 28.84 54.88 92.93

7.43 11.88 17.32 22.73 33.20 63.18 106.99

0.41 0.45 0.51 0.64 0.68 0.78 0.96

10.10 11.09 12.57 15.77 16.75 19.22 23.65

nr nr nr nr nr nr nr

17.53 22.97 29.88 38.50 49.96 82.40 130.65

Elbow 15mm 22mm 28mm 35mm 42mm 54mm 67mm

0.25 0.66 1.76 7.67 12.67 26.17 67.93

0.29 0.76 2.03 8.83 14.59 30.13 78.21

0.23 0.26 0.31 0.35 0.41 0.44 0.54

5.67 6.41 7.64 8.62 10.10 10.84 13.30

nr nr nr nr nr nr nr

5.95 7.17 9.66 17.45 24.69 40.97 91.51

Backplate elbow 15mm dia. 22mm dia.

4.84 10.39

5.57 11.96

0.51 0.54

12.57 13.30

nr nr

18.14 25.27

Overflow bend 22mm dia.

14.64

16.86

0.26

6.41

nr

23.26

Return bend 15mm dia. 22mm dia. 28mm dia.

7.25 14.24 18.20

8.35 16.39 20.95

0.23 0.26 0.31

5.67 6.41 7.64

nr nr nr

14.01 22.80 28.59

dia. dia. dia. dia. dia. dia. dia.

186

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd COPPER PIPEWORK – cont'd Extra over copper pipes; capillary fittings; BS 864 – cont'd Obtuse elbow 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia.

0.93 1.94 3.71 11.57 20.60 37.26 67.60

1.07 2.23 4.27 13.32 23.72 42.90 77.83

0.23 0.26 0.31 0.36 0.41 0.44 0.54

5.67 6.41 7.64 8.87 10.10 10.84 13.30

nr nr nr nr nr nr nr

6.74 8.64 11.91 22.19 33.82 53.74 91.13

Straight tap connector 15mm x 1/2" dia. 22mm x 3/4" dia.

1.24 1.85

1.43 2.13

0.13 0.14

3.20 3.45

nr nr

4.63 5.58

Bent tap connector 15mm x 1/2" dia. 22mm x 3/4" dia.

1.84 5.64

2.12 6.49

0.13 0.14

3.20 3.45

nr nr

5.32 9.94

Bent male union connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia.

9.43 12.25 17.53 28.60 46.49 73.45

10.86 14.10 20.18 32.93 53.53 84.56

0.41 0.45 0.51 0.64 0.68 0.78

10.10 11.09 12.57 15.77 16.75 19.22

nr nr nr nr nr nr

20.96 25.19 32.75 48.70 70.28 103.78

Bent female union connector 15mm dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia.

9.43 12.25 17.53 28.60 46.49 73.45

10.86 14.10 20.18 32.93 53.53 84.56

0.41 0.45 0.51 0.64 0.68 0.78

10.10 11.09 12.57 15.77 16.75 19.22

nr nr nr nr nr nr

20.96 25.19 32.75 48.70 70.28 103.78

Straight union adaptor 15mm x 3/4" dia. 22mm x 1" dia. 28mm x 1 1/4" dia. 35mm x 1 1/2" dia. 42mm x 2" dia. 54mm x 2 1/2" dia.

4.03 5.72 9.25 14.24 17.98 27.76

4.64 6.59 10.65 16.39 20.70 31.96

0.41 0.45 0.51 0.64 0.68 0.78

10.10 11.09 12.57 15.77 16.75 19.22

nr nr nr nr nr nr

14.74 17.67 23.22 32.16 37.45 51.18

Straight male union connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia.

8.03 10.41 15.52 22.36 35.13 50.48

9.25 11.99 17.87 25.74 40.45 58.12

0.41 0.45 0.51 0.64 0.68 0.78

10.10 11.09 12.57 15.77 16.75 19.22

nr nr nr nr nr nr

19.35 23.07 30.43 41.51 57.20 77.34

Material Costs/Prices for Measured Works – Mechanical Installations

187

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Straight female union connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia.

8.03 10.41 15.52 22.36 35.13 50.48

9.25 11.99 17.87 25.74 40.45 58.12

0.41 0.45 0.51 0.64 0.68 0.78

10.10 11.09 12.57 15.77 16.75 19.22

nr nr nr nr nr nr

19.35 23.07 30.43 41.51 57.20 77.34

Male nipple 3/4 x 1/2" dia. 1 x 3/4" dia. 1 1/4 x 1" dia. 1 1/2 x 1 1/4" dia. 2 x 1 1/2" dia. 2 1/2 x 2" dia.

3.97 2.27 2.50 9.28 18.99 24.74

4.57 2.61 2.88 10.68 21.86 28.48

0.28 0.32 0.37 0.42 0.46 0.56

6.90 7.88 9.12 10.35 11.33 13.80

nr nr nr nr nr nr

11.47 10.50 11.99 21.03 33.20 42.28

Female nipple 3/4 x 1/2" dia. 1 x 3/4" dia. 1 1/4 x 1" dia. 1 1/2 x 1 1/4" dia. 2 x 1 1/2" dia. 2 1/2 x 2" dia.

3.97 4.60 6.27 9.28 18.99 24.74

4.57 5.30 7.22 10.68 21.86 28.48

0.28 0.32 0.37 0.42 0.46 0.56

6.90 7.88 9.12 10.35 11.33 13.80

nr nr nr nr nr nr

11.47 13.18 16.34 21.03 33.20 42.28

Equal tee 10mm dia. 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia.

2.51 0.25 0.66 4.90 12.49 20.03 40.39 54.95

2.89 0.29 0.76 5.64 14.38 23.06 46.50 63.27

0.25 0.36 0.39 0.43 0.57 0.60 0.65 0.78

6.16 8.87 9.61 10.59 14.04 14.78 16.02 19.22

nr nr nr nr nr nr nr nr

9.05 9.16 10.37 16.24 28.42 37.84 62.52 82.48

Female tee, reducing branch FI 15 x 15mm x 1/4" dia. 22 x 22mm x 1/2" dia. 28 x 28mm x 3/4" dia. 35 x 35mm x 3/4" dia. 42 x 42mm x 1/2" dia.

6.04 4.20 14.49 20.91 25.12

6.95 4.84 16.68 24.07 28.92

0.36 0.39 0.43 0.47 0.60

8.87 9.61 10.59 11.58 14.78

nr nr nr nr nr

15.82 14.44 27.28 35.65 43.70

Backplate tee 15 x 15mm x 1/2" dia.

11.44

13.17

0.62

15.28

nr

28.45

Heater tee 1/2 x 1/2" x 15mm dia.

10.29

11.85

0.36

8.87

nr

20.72

Union heater tee 1/2 x 1/2" x 15mm dia.

10.29

11.85

0.36

8.87

nr

20.72

Sweep tee – equal 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia.

8.18 10.52 17.71 25.11 37.23 41.23 56.21

9.42 12.11 20.39 28.91 42.86 47.47 64.72

0.36 0.39 0.43 0.57 0.60 0.65 0.78

8.87 9.61 10.59 14.04 14.78 16.02 19.22

nr nr nr nr nr nr nr

18.29 21.72 30.98 42.95 57.65 63.48 83.93

188

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd COPPER PIPEWORK – cont'd Extra over copper pipes; capillary fittings; BS 864 – cont'd Sweep tee – reducing 22 x 22 x 15mm dia. 28 x 28 x 22mm dia. 35 x 35 x 22mm dia.

8.82 14.98 25.11

10.15 17.25 28.91

0.39 0.43 0.57

9.61 10.59 14.04

nr nr nr

19.76 27.84 42.95

Sweep tee – double 15mm dia. 22mm dia. 28mm dia.

9.25 12.59 19.13

10.65 14.50 22.02

0.36 0.39 0.43

8.87 9.61 10.59

nr nr nr

19.52 24.10 32.62

Cross 15mm dia. 22mm dia. 28mm dia.

12.24 13.67 19.62

14.09 15.74 22.59

0.48 0.53 0.61

11.83 13.06 15.03

nr nr nr

25.92 28.80 37.62

5.73

6.60

0.16

3.94

nr

10.54

2.62 4.20 5.61 10.49 11.47 16.87

3.02 4.84 6.46 12.08 13.21 19.42

0.27 0.32 0.37 0.43 0.50 0.54

6.65 7.88 9.12 10.59 12.32 13.30

nr nr nr nr nr nr

9.67 12.72 15.58 22.67 25.52 32.73

4.94 5.73 7.89

5.69 6.60 9.08

0.27 0.32 0.37

6.65 7.88 9.12

nr nr nr

12.34 14.48 18.20

Straight female connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia.

6.45 7.27 10.72

7.43 8.37 12.34

0.32 0.36 0.42

7.88 8.87 10.35

nr nr nr

15.31 17.24 22.69

Straight male connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 42mm x 1 1/2" dia. 54mm x 2" dia.

6.27 7.27 10.72 20.92 34.00

7.22 8.37 12.34 24.09 39.15

0.32 0.36 0.42 0.53 0.62

7.88 8.87 10.35 13.06 15.28

nr nr nr nr nr

15.10 17.24 22.69 37.14 54.42

Extra over copper pipes; high duty capillary fittings; BS 864 Stop end 15mm dia. Straight coupling; copper to copper 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. Reducing coupling 15 x 12mm dia. 22 x 15mm dia. 28 x 22mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

189

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Reducer 15 x 12mm 22 x 15mm 28 x 22mm 35 x 28mm 42 x 35mm 54 x 42mm

dia. dia. dia. dia. dia. dia.

Material £

Labour hours

Labour £

Unit

Total rate £

3.24 3.17 5.73 7.27 9.37 15.11

3.73 3.65 6.60 8.37 10.79 17.40

0.27 0.32 0.37 0.43 0.50 0.39

6.65 7.88 9.12 10.59 12.32 9.61

nr nr nr nr nr nr

10.38 11.53 15.71 18.96 23.11 27.01

Straight union adaptor 15mm x 3/4" dia. 22mm x 1" dia. 28mm x 1 1/4" dia. 35mm x 1 1/2" dia. 42mm x 2" dia.

5.24 7.09 9.37 16.98 21.51

6.03 8.16 10.79 19.55 24.77

0.27 0.32 0.37 0.43 0.50

6.65 7.88 9.12 10.59 12.32

nr nr nr nr nr

12.69 16.05 19.90 30.14 37.08

Bent union adaptor 15mm x 3/4" dia. 22mm x 1" dia. 28mm x 1 1/4" dia.

13.62 18.38 24.74

15.68 21.16 28.48

0.27 0.32 0.37

6.65 7.88 9.12

nr nr nr

22.33 29.05 37.60

Adaptor; male copper to FI 15mm x 1/2" dia. 22mm x 3/4" dia.

6.13 10.52

7.06 12.11

0.27 0.32

6.65 7.88

nr nr

13.71 20.00

Union coupling 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia.

11.80 15.11 20.97 36.61 43.12

13.59 17.40 24.14 42.15 49.65

0.54 0.60 0.68 0.83 0.89

13.30 14.78 16.75 20.45 21.93

nr nr nr nr nr

26.89 32.18 40.90 62.60 71.57

Elbow 15mm 22mm 28mm 35mm 42mm 54mm

dia. dia. dia. dia. dia. dia.

7.60 8.12 12.06 18.86 23.49 40.86

8.75 9.35 13.88 21.71 27.04 47.04

0.27 0.32 0.37 0.43 0.50 0.52

6.65 7.88 9.12 10.59 12.32 12.81

nr nr nr nr nr nr

15.40 17.23 23.00 32.31 39.36 59.86

Return bend 28mm dia. 35mm dia.

18.20 22.42

20.95 25.81

0.37 0.43

9.12 10.59

nr nr

30.07 36.41

Bent male union connector 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia.

17.62 23.73 43.12

20.29 27.32 49.65

0.54 0.60 0.68

13.30 14.78 16.75

nr nr nr

33.59 42.10 66.40

3.56 4.62 5.89

4.10 5.32 6.78

0.38 0.41 0.43

9.37 10.10 10.60

nr nr nr

13.46 15.42 17.38

Composite flange 35mm dia. 42mm dia. 54mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

190

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd COPPER PIPEWORK – cont'd Extra over copper pipes; high duty capillary fittings; BS 864 – cont'd Equal tee 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

8.73 10.98 14.47 24.74 31.50 49.60

10.05 12.64 16.66 28.48 36.27 57.11

0.44 0.47 0.53 0.70 0.84 0.79

10.84 11.58 13.06 17.25 20.70 19.46

nr nr nr nr nr nr

20.89 24.22 29.72 45.73 56.96 76.57

11.97 14.14 20.19 32.02 40.99 64.72

13.78 16.28 23.25 36.87 47.19 74.51

0.44 0.47 0.53 0.73 0.84 1.01

10.84 11.58 13.06 17.99 20.70 24.88

nr nr nr nr nr nr

24.62 27.86 36.30 54.85 67.89 99.40

Stop end 15mm dia. 22mm dia. 28mm dia.

1.34 1.59 1.83

1.54 1.83 2.11

0.10 0.12 0.15

2.46 2.96 3.70

nr nr nr

4.01 4.79 5.80

Straight connector; copper to copper 15mm dia. 22mm dia. 28mm dia.

2.78 1.47 4.89

3.20 1.69 5.63

0.18 0.21 0.24

4.43 5.17 5.91

nr nr nr

7.64 6.87 11.54

Straight connector; copper to imperial copper 22mm dia.

4.59

5.28

0.21

5.17

nr

10.46

Male coupling; copper to MI (BSP) 15mm dia. 22mm dia. 28mm dia.

0.79 1.24 2.89

0.91 1.43 3.33

0.19 0.23 0.26

4.68 5.67 6.41

nr nr nr

5.59 7.09 9.73

Male coupling with long thread and backnut 15mm dia. 22mm dia.

5.09 6.46

5.86 7.44

0.19 0.23

4.68 5.67

nr nr

10.54 13.10

Female coupling; copper to FI (BSP) 15mm dia. 22mm dia. 28mm dia.

0.97 1.39 4.04

1.12 1.60 4.65

0.19 0.23 0.27

4.68 5.67 6.65

nr nr nr

5.80 7.27 11.30

Elbow 15mm dia. 22mm dia. 28mm dia.

1.04 1.77 5.97

1.20 2.04 6.87

0.18 0.21 0.24

4.43 5.17 5.91

nr nr nr

5.63 7.21 12.79

Reducing tee 15 x 12mm 22 x 15mm 28 x 22mm 35 x 28mm 42 x 28mm 54 x 28mm

dia. dia. dia. dia. dia. dia.

Extra over copper pipes; compression fittings; BS 864

Material Costs/Prices for Measured Works – Mechanical Installations

191

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Male elbow; copper to FI (BSP) 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia.

1.99 2.58 6.24

2.29 2.97 7.18

0.19 0.23 0.27

4.68 5.67 6.65

nr nr nr

6.97 8.64 13.84

Female elbow; copper to FI (BSP) 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia.

3.05 4.41 7.78

3.51 5.08 8.96

0.19 0.23 0.27

4.68 5.67 6.65

nr nr nr

8.19 10.74 15.61

Backplate elbow 15mm x 1/2" dia.

4.41

5.08

0.50

12.32

nr

17.40

Tank coupling; long thread 22mm dia.

6.46

7.44

0.46

11.33

nr

18.77

Tee equal 15mm dia. 22mm dia. 28mm dia.

1.47 2.47 11.25

1.69 2.84 12.95

0.28 0.30 0.34

6.90 7.39 8.38

nr nr nr

8.59 10.24 21.33

Tee reducing 22mm dia.

6.36

7.32

0.30

7.39

nr

14.71

Backplate tee 15mm dia.

15.53

17.88

0.62

15.28

nr

33.16

Reducer 76 x 67mm dia 108 x 76mm dia 133 x 108mm dia 159 x 133mm dia

25.64 53.73 107.14 137.03

29.52 61.86 123.35 157.77

1.40 1.80 2.20 2.60

34.49 44.35 54.20 64.06

nr nr nr nr

64.01 106.21 177.56 221.83

90° elbow 76mm dia 108mm dia 133mm dia 159mm dia

61.94 114.02 241.03 299.22

71.31 131.27 277.50 344.50

1.60 2.00 2.40 2.80

39.42 49.28 59.13 68.99

nr nr nr nr

110.73 180.55 336.64 413.49

45° elbow 76mm dia 108mm dia 133mm dia 159mm dia

58.03 91.01 232.73 334.98

66.81 104.78 267.95 385.67

1.60 2.00 2.40 2.80

39.42 49.28 59.13 68.99

nr nr nr nr

106.23 154.06 327.08 454.66

Equal tee 76mm dia 108mm dia 133mm dia 159mm dia

75.43 117.16 275.93 329.09

86.84 134.89 317.69 378.89

2.40 3.00 3.60 4.20

59.13 73.92 88.70 103.48

nr nr nr nr

145.98 208.80 406.38 482.37

Extra over fittings; silver brazed welded joints

Material Costs/Prices for Measured Works – Mechanical Installations

192

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd COPPER PIPEWORK – cont'd Extra over copper pipes; dezincification resistant compression fittings; BS 864 Stop end 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia.

1.92 2.78 5.95 9.33 15.53

2.21 3.20 6.85 10.74 17.88

0.10 0.13 0.15 0.18 0.20

2.46 3.20 3.70 4.43 4.93

nr nr nr nr nr

4.67 6.40 10.55 15.18 22.81

Straight coupling; copper to copper 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

1.54 2.51 5.69 12.04 15.83 23.67

1.77 2.89 6.55 13.86 18.23 27.25

0.18 0.21 0.24 0.29 0.33 0.38

4.43 5.17 5.91 7.15 8.13 9.36

nr nr nr nr nr nr

6.21 8.06 12.46 21.01 26.36 36.61

5.66

6.52

0.20

4.93

nr

11.44

1.37 2.08 4.03 9.15 13.72 20.27

1.58 2.39 4.64 10.53 15.80 23.34

0.19 0.23 0.26 0.32 0.37 0.57

4.68 5.67 6.41 7.88 9.12 14.04

nr nr nr nr nr nr

6.26 8.06 11.05 18.42 24.91 37.38

7.78 8.62

8.96 9.92

0.23 0.24

5.67 5.91

nr nr

14.62 15.84

Female coupling; copper to FI (BSP) 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia.

1.65 2.41 5.22 10.99 14.77 21.67

1.90 2.77 6.01 12.65 17.01 24.95

0.19 0.23 0.27 0.32 0.37 0.42

4.68 5.67 6.65 7.88 9.12 10.35

nr nr nr nr nr nr

6.58 8.44 12.66 20.54 26.12 35.30

Elbow 15mm 22mm 28mm 35mm 42mm 54mm

1.85 2.95 7.34 16.25 22.01 37.87

2.13 3.40 8.45 18.71 25.34 43.60

0.18 0.21 0.24 0.29 0.33 0.38

4.43 5.17 5.91 7.15 8.13 9.36

nr nr nr nr nr nr

6.56 8.57 14.36 25.85 33.47 52.96

3.21 3.59 6.73

3.70 4.13 7.75

0.19 0.23 0.27

4.68 5.67 6.65

nr nr nr

8.38 9.80 14.40

Straight swivel connector; copper to imperial copper 22mm dia. Male coupling; copper to MI (BSP) 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia. 35mm x 1 1/4" dia. 42mm x 1 1/2" dia. 54mm x 2" dia. Male coupling with long thread and backnuts 22mm dia. 28mm dia.

dia. dia. dia. dia. dia. dia.

Male elbow; copper to MI (BSP) 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia.

Material Costs/Prices for Measured Works – Mechanical Installations

193

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Female elbow; copper to FI (BSP) 15mm x 1/2" dia. 22mm x 3/4" dia. 28mm x 1" dia.

3.44 4.95 8.21

3.96 5.70 9.45

0.19 0.23 0.27

4.68 5.67 6.65

nr nr nr

8.64 11.37 16.10

Backplate elbow 15mm x 1/2" dia.

5.00

5.76

0.50

12.32

nr

18.08

Straight tap connector 15mm dia. 22mm dia.

2.84 6.16

3.27 7.09

0.13 0.15

3.20 3.70

nr nr

6.47 10.79

Tank coupling 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

3.91 4.33 9.14 16.14 26.24 33.80

4.50 4.99 10.52 18.58 30.21 38.91

0.19 0.23 0.27 0.32 0.37 0.31

4.68 5.67 6.65 7.88 9.12 7.64

nr nr nr nr nr nr

9.18 10.65 17.18 26.47 39.33 46.55

Tee equal 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

2.60 4.29 11.71 21.13 33.23 53.38

2.99 4.94 13.48 24.33 38.26 61.46

0.28 0.30 0.34 0.43 0.46 0.54

6.90 7.39 8.38 10.59 11.33 13.30

nr nr nr nr nr nr

9.89 12.33 21.86 34.92 49.59 74.76

Tee reducing 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

6.86 11.31 20.65 31.93 53.38

7.90 13.02 23.77 36.76 61.46

0.30 0.34 0.43 0.46 0.54

7.39 8.38 10.59 11.33 13.30

nr nr nr nr nr

15.29 21.40 34.37 48.10 74.76

24.26 28.92 31.76 37.95 41.39 48.02 56.61 68.22 90.14 123.51 178.18

27.93 33.30 36.57 43.69 47.65 55.29 65.18 78.54 103.78 142.20 205.14

0.27 0.32 0.36 0.47 0.54 0.63 0.77 0.93 1.14 1.41 1.74

6.65 7.88 8.87 11.58 13.30 15.52 18.97 22.91 28.09 34.74 42.87

nr nr nr nr nr nr nr nr nr nr nr

34.58 41.18 45.44 55.27 60.96 70.81 84.15 101.46 131.87 176.94 248.01

Extra over copper pipes; bronze one piece brazing flanges; metric, including jointing ring and bolts Bronze flange; PN6 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

194

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd COPPER PIPEWORK – cont'd Extra over copper pipes; bronze one piece brazing flanges; metric, including jointing ring and bolts – cont'd Bronze flange; PN10 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

27.78 29.57 32.52 39.31 44.07 48.22 56.65 68.22 86.23 115.13 145.92

31.98 34.04 37.44 45.26 50.74 55.52 65.22 78.54 99.28 132.55 168.00

0.27 0.32 0.38 0.47 0.54 0.63 0.77 0.93 1.14 1.41 1.74

6.65 7.88 9.36 11.58 13.30 15.52 18.97 22.91 28.09 34.74 42.87

nr nr nr nr nr nr nr nr nr nr nr

38.64 41.93 46.80 56.84 64.04 71.04 84.19 101.46 127.37 167.29 210.87

Bronze flange; PN16 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

30.56 32.53 35.77 43.24 48.48 53.04 62.31 75.04 94.85 126.64 160.51

35.18 37.45 41.18 49.78 55.82 61.07 71.74 86.40 109.20 145.80 184.80

0.27 0.32 0.38 0.47 0.54 0.63 0.77 0.93 1.14 1.41 1.74

6.65 7.88 9.36 11.58 13.30 15.52 18.97 22.91 28.09 34.74 42.87

nr nr nr nr nr nr nr nr nr nr nr

41.84 45.34 50.55 61.36 69.12 76.59 90.71 109.31 137.29 180.54 227.67

20.36 25.99 26.71 43.71 58.96 65.02 80.00 103.05 163.73 193.16 241.43

23.44 29.92 30.75 50.32 67.88 74.86 92.11 118.64 188.51 222.39 277.96

0.27 0.27 0.27 0.32 0.32 0.34 0.36 0.37 0.41 0.58 0.61

6.65 6.65 6.65 7.88 7.88 8.38 8.87 9.12 10.10 14.29 15.03

nr nr nr nr nr nr nr nr nr nr nr

30.09 36.58 37.40 58.21 75.77 83.24 100.98 127.76 198.61 236.68 292.99

Extra Over copper pipes; bronze blank flanges; metric, including jointing ring and bolts Gunmetal blank flange; PN6 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

195

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Gunmetal blank flange; PN10 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

24.63 31.87 35.29 43.71 81.92 93.40 100.19 133.14 156.26 207.57 282.70

28.36 36.69 40.63 50.32 94.32 107.53 115.35 153.29 179.91 238.98 325.48

0.27 0.27 0.27 0.32 0.32 0.34 0.46 0.47 0.51 0.58 0.71

6.65 6.65 6.65 7.88 7.88 8.38 11.33 11.58 12.57 14.29 17.49

nr nr nr nr nr nr nr nr nr nr nr

35.01 43.35 47.28 58.21 102.20 115.91 126.69 164.87 192.47 253.27 342.97

Gunmetal blank flange; PN16 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

24.63 32.35 35.29 43.71 81.92 93.40 145.25 133.14 156.26 358.88 282.70

28.36 37.25 40.63 50.32 94.32 107.53 167.23 153.29 179.91 413.19 325.48

0.27 0.27 0.27 0.32 0.32 0.34 0.46 0.47 0.51 0.58 0.71

6.65 6.65 6.65 7.88 7.88 8.38 11.33 11.58 12.57 14.29 17.49

nr nr nr nr nr nr nr nr nr nr nr

35.01 43.90 47.28 58.21 102.20 115.91 178.56 164.87 192.47 427.48 342.97

Gunmetal screwed flange; 6 BSP 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

20.36 23.55 24.54 33.08 39.71 53.96 67.73 81.75 129.46 153.46 195.36

23.44 27.11 28.25 38.09 45.72 62.13 77.98 94.12 149.05 176.68 224.92

0.35 0.47 0.52 0.62 0.70 0.84 1.03 1.22 1.41 1.75 2.21

8.62 11.58 12.81 15.28 17.25 20.70 25.38 30.06 34.74 43.12 54.45

nr nr nr nr nr nr nr nr nr nr nr

32.06 38.69 41.07 53.36 62.97 82.82 103.36 124.18 183.79 219.80 279.37

Gunmetal screwed flange; 10 BSP 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

24.66 28.72 31.72 45.20 55.19 78.48 91.88 103.72 137.69 166.86 296.12

28.39 33.07 36.52 52.04 63.54 90.36 105.78 119.42 158.53 192.11 340.93

0.35 0.47 0.52 0.62 0.70 0.84 1.03 1.22 1.41 1.75 2.21

8.62 11.58 12.81 15.28 17.25 20.70 25.38 30.06 34.74 43.12 54.45

nr nr nr nr nr nr nr nr nr nr nr

37.02 44.65 49.33 67.32 80.79 111.05 131.16 149.47 193.27 235.23 395.38

Extra Over copper pipes; bronze screwed flanges; metric, including jointing ring and bolts

Material Costs/Prices for Measured Works – Mechanical Installations

196

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

0.35 0.47 0.52 0.62 0.70 0.84 1.03 1.22 1.41 1.75 2.21

8.62 11.58 12.81 15.28 17.25 20.70 25.38 30.06 34.74 43.12 54.45

nr nr nr nr nr nr nr nr nr nr nr

30.94 39.79 45.46 65.17 77.30 97.94 137.03 158.10 184.55 285.86 354.74

S10: COLD WATER – cont'd COPPER PIPEWORK – cont'd Extra Over copper pipes; bronze screwed flanges; metric, including jointing ring and bolts – cont'd Gunmetal screwed flange; 16 BSP 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

19.38 24.50 28.36 43.34 52.16 67.09 96.98 111.21 130.12 210.84 260.82

22.31 28.21 32.65 49.90 60.05 77.24 111.66 128.04 149.81 242.75 300.29

Extra over copper pipes; labour Made bend 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia.

-

-

0.26 0.28 0.31 0.42 0.51 0.58 0.69 0.80

6.41 6.90 7.64 10.35 12.57 14.29 17.00 19.71

nr nr nr nr nr nr nr nr

6.41 6.90 7.64 10.35 12.57 14.29 17.00 19.71

Bronze butt weld 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. 67mm dia. 76mm dia. 108mm dia. 133mm dia. 159mm dia.

-

-

0.25 0.31 0.37 0.49 0.58 0.72 0.88 1.08 1.37 1.73 2.03

6.16 7.64 9.12 12.07 14.29 17.74 21.68 26.61 33.75 42.62 50.02

nr nr nr nr nr nr nr nr nr nr nr

6.16 7.64 9.12 12.07 14.29 17.74 21.68 26.61 33.75 42.62 50.02

0.87 1.37 2.81 3.54 6.37 8.13

1.00 1.58 3.24 4.08 7.33 9.36

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

9.87 10.45 14.08 14.92 20.15 24.14

PRESSFIT (copper fittings) Mechanical pressfit joints; butyl rubber O ring Coupler 15mm 22mm 28mm 35mm 42mm 54mm

dia dia dia dia dia dia

Material Costs/Prices for Measured Works – Mechanical Installations

197

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Stop end 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

Material £

Labour hours

Labour £

Unit

Total rate £

2.20 3.47 5.96 8.96 10.79

2.53 4.00 6.86 10.32 12.42

0.18 0.22 0.22 0.26 0.30

4.43 5.42 5.42 6.41 7.39

nr nr nr nr nr

6.97 9.42 12.28 16.72 19.81

1.01 2.68 2.77 3.32 3.68 5.75 5.47 5.47 7.41 7.41

1.16 3.09 3.19 3.82 4.24 6.62 6.30 6.30 8.53 8.53

0.36 0.40 0.40 0.40 0.44 0.44 0.48 0.48 0.52 0.56

8.87 9.86 9.86 9.86 10.84 10.84 11.83 11.83 12.81 13.80

nr nr nr nr nr nr nr nr nr nr

10.03 12.94 13.04 13.68 15.08 17.46 18.12 18.12 21.34 22.33

90° elbow 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

0.94 1.58 3.40 7.01 13.16 18.26

1.08 1.82 3.91 8.07 15.15 21.02

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

9.95 10.69 14.76 18.91 27.96 35.81

45° elbow 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

1.16 1.60 4.81 6.86 11.42 16.24

1.34 1.84 5.54 7.90 13.15 18.70

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

10.21 10.71 16.38 18.74 25.96 33.48

Equal tee 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

1.50 2.73 4.90 8.47 16.73 20.88

1.73 3.14 5.64 9.75 19.26 24.04

0.54 0.54 0.66 0.66 0.78 0.90

13.30 13.30 16.26 16.26 19.22 22.17

nr nr nr nr nr nr

15.03 16.45 21.90 26.01 38.48 46.21

2.22 9.38 5.79 7.54 8.40 15.19 15.19 25.67 25.67

2.56 10.80 6.67 8.68 9.67 17.49 17.49 29.55 29.55

0.54 0.62 0.62 0.62 0.62 0.70 0.70 0.82 0.82

13.30 15.28 15.28 15.28 15.28 17.25 17.25 20.20 20.20

nr nr nr nr nr nr nr nr nr

15.86 26.08 21.94 23.96 24.95 34.74 34.74 49.76 49.76

Reducer 22 x 15mm 28 x 15mm 28 x 22mm 35 x 22mm 35 x 28mm 42 x 22mm 42 x 28mm 42 x 35mm 54 x 35mm 54 x 42mm

Reducing tee 22 x 15mm 28 x 15mm 28 x 22mm 35 x 22mm 35 x 28mm 42 x 28mm 42 x 35mm 54 x 35mm 54 x 42mm

dia dia dia dia dia dia dia dia dia dia

dia dia dia dia dia dia dia dia dia

198

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd PRESSFIT (copper fittings) – cont'd Mechanical pressfit joints; butyl rubber O ring – cont'd Male iron connector; BSP thread 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

3.17 4.70 6.29 11.37 15.24 29.41

3.65 5.41 7.24 13.09 17.55 33.86

0.18 0.18 0.22 0.22 0.26 0.30

4.43 4.43 5.42 5.42 6.41 7.39

nr nr nr nr nr nr

8.08 9.85 12.66 18.51 23.95 41.25

90° elbow; male iron BSP thread 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

5.13 8.03 12.30 16.00 20.86 30.48

5.91 9.25 14.16 18.42 24.02 35.09

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

14.78 18.11 25.00 29.26 36.83 49.88

Female iron connector; BSP thread 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

3.62 4.78 6.44 12.59 17.99 30.85

4.17 5.50 7.41 14.50 20.71 35.52

0.18 0.18 0.22 0.22 0.26 0.30

4.43 4.43 5.42 5.42 6.41 7.39

nr nr nr nr nr nr

8.60 9.94 12.83 19.92 27.12 42.91

90° elbow; female iron BSP thread 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

4.33 6.37 10.52 13.60 18.50 27.22

4.99 7.33 12.11 15.66 21.30 31.34

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

13.86 16.20 22.95 26.50 34.11 46.12

3.08 4.32 5.89 8.89 11.28 15.72

3.55 4.97 6.78 10.24 12.99 18.10

0.41 0.51 0.58 0.65 0.71 0.80

10.10 12.57 14.29 16.02 17.50 19.71

m m m m m m

13.65 17.54 21.07 26.26 30.49 37.81

STAINLESS STEEL PIPEWORK Stainless steel pipes; capillary or compression joints; BS 4127, vertical or at low level, with brackets measured separately Grade 304; satin finish 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

199

S: PIPED SUPPLY SYSTEMS

Item

Grade 316 satin finish 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

3.96 7.40 8.78 15.93 20.61 24.02

4.56 8.52 10.11 18.34 23.73 27.65

0.61 0.76 0.87 0.98 1.06 1.16

15.03 18.74 21.44 24.16 26.13 28.58

m m m m m m

19.59 27.26 31.55 42.50 49.86 56.24

10.25 11.94 12.51 14.21 16.14 18.43

11.80 13.75 14.40 16.36 18.58 21.22

0.26 0.26 0.31 0.32 0.32 0.34

6.41 6.41 7.64 7.88 7.88 8.38

nr nr nr nr nr nr

18.21 20.15 22.04 24.24 26.47 29.60

Screw on backplate, female All sizes 15mm to 54mm dia.

9.24

10.64

0.10

2.46

nr

13.10

Screw on backplate, male All sizes 15mm to 54mm dia.

10.53

12.12

0.10

2.46

nr

14.59

Stainless steel threaded rods; metric thread; including nuts, washers etc 10mm dia x 600mm long

11.01

12.68

0.18

4.43

nr

17.11

1.13 1.83 2.42 5.57 6.42 9.66

1.30 2.11 2.79 6.41 7.39 11.12

0.25 0.28 0.33 0.37 0.42 0.45

6.16 6.90 8.13 9.12 10.35 11.09

nr nr nr nr nr nr

7.46 9.01 10.92 15.53 17.74 22.21

45° bend 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

6.08 7.99 9.81 11.62 14.96 18.49

7.00 9.20 11.29 13.38 17.22 21.29

0.25 0.30 0.33 0.37 0.42 0.45

6.16 7.31 8.13 9.12 10.35 11.09

nr nr nr nr nr nr

13.16 16.51 19.43 22.50 27.57 32.38

90° bend 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

3.14 4.24 5.98 14.58 20.08 27.22

3.62 4.88 6.88 16.79 23.12 31.34

0.28 0.28 0.33 0.37 0.42 0.45

6.90 6.90 8.13 9.12 10.35 11.09

nr nr nr nr nr nr

10.51 11.78 15.02 25.91 33.47 42.43

Fixings For Stainless Steel pipework Single pipe ring 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

Extra over stainless steel pipes; capillary fittings Straight coupling 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

200

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd STAINLESS STEEL PIPEWORK – cont'd Extra over stainless steel pipes; capillary fittings – cont'd Reducer 22 x 15mm 28 x 22mm 35 x 28mm 42 x 35mm 54 x 42mm

dia. dia. dia. dia. dia.

7.25 8.08 9.89 10.66 31.61

8.35 9.30 11.39 12.27 36.39

0.28 0.33 0.37 0.42 0.48

6.90 8.13 9.12 10.35 11.85

nr nr nr nr nr

15.25 17.43 20.51 22.62 48.24

Tap connector 15mm dia. 22mm dia. 28mm dia.

15.29 20.21 28.05

17.60 23.27 32.29

0.13 0.14 0.17

3.20 3.45 4.19

nr nr nr

20.81 26.72 36.48

Tank connector 15mm dia. 22mm dia. 28mm dia 35mm dia. 42mm dia. 54mm dia.

19.75 29.39 36.19 52.33 69.10 104.62

22.74 33.84 41.67 60.25 79.56 120.45

0.13 0.13 0.15 0.18 0.21 0.24

3.20 3.20 3.70 4.43 5.17 5.91

nr nr nr nr nr nr

25.94 37.04 45.36 64.68 84.73 126.36

5.63 7.01 8.47 20.34 25.10 50.69

6.48 8.07 9.75 23.42 28.90 58.36

0.37 0.40 0.45 0.59 0.62 0.67

9.12 9.86 11.09 14.54 15.28 16.51

nr nr nr nr nr nr

15.60 17.93 20.84 37.96 44.18 74.87

11.42 12.86 12.86 22.47 22.47 27.62 27.62 57.19 57.19

13.15 14.81 14.81 25.87 25.87 31.80 31.80 65.84 65.84

0.37 0.45 0.45 0.59 0.59 0.62 0.62 0.67 0.67

9.12 11.09 11.09 14.54 14.54 15.28 15.28 16.51 16.51

nr nr nr nr nr nr nr nr nr

22.27 25.89 25.90 40.41 40.41 47.08 47.08 82.36 82.36

25.32 39.88 51.55 67.68 85.36 112.93

29.15 45.91 59.35 77.92 98.28 130.02

0.25 0.28 0.33 0.37 0.42 0.45

6.16 6.90 8.13 9.12 10.35 11.09

nr nr nr nr nr nr

35.31 52.81 67.48 87.04 108.63 141.11

Tee equal 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. Unequal tee 22 x 15mm 28 x 15mm 28 x 22mm 35 x 22mm 35 x 28mm 42 x 28mm 42 x 35mm 54 x 35mm 54 x 42mm

dia. dia. dia. dia. dia. dia. dia. dia. dia.

Union, conical seat 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

201

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Union, flat seat 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

Material £

Labour hours

Labour £

Unit

Total rate £

26.44 41.18 53.23 69.55 87.62 117.49

30.44 47.41 61.28 80.07 100.88 135.27

0.25 0.28 0.33 0.37 0.42 0.45

6.16 6.90 8.13 9.12 10.35 11.09

nr nr nr nr nr nr

36.60 54.31 69.42 89.19 111.23 146.36

Straight coupling 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia.

22.01 41.94 56.45 87.15 101.73

25.34 48.29 64.99 100.34 117.12

0.18 0.22 0.25 0.30 0.40

4.43 5.42 6.16 7.39 9.86

nr nr nr nr nr

29.78 53.71 71.15 107.73 126.98

90° bend 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia.

27.75 55.12 75.18 152.22 222.45

31.95 63.46 86.56 175.25 256.11

0.18 0.22 0.25 0.33 0.35

4.43 5.42 6.16 8.13 8.62

nr nr nr nr nr

36.38 68.88 92.72 183.39 264.74

39.94 54.70 79.93 106.34

45.98 62.98 92.03 122.43

0.28 0.28 0.30 0.37

6.90 6.90 7.39 9.12

nr nr nr nr

52.88 69.88 99.42 131.55

Stud coupling 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia.

22.88 38.70 53.73 86.06 101.73

26.34 44.56 61.86 99.08 117.12

0.42 0.25 0.25 0.37 0.42

10.35 6.16 6.16 9.12 10.35

nr nr nr nr nr

36.69 50.72 68.02 108.20 127.47

Equal tee 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia.

39.07 80.72 110.40 219.53 304.40

44.98 92.94 127.11 252.75 350.46

0.37 0.40 0.45 0.59 0.62

9.12 9.86 11.09 14.54 15.28

nr nr nr nr nr

54.10 102.79 138.19 267.29 365.75

Running tee 15mm dia. 22mm dia. 28mm dia.

48.10 86.65 146.71

55.38 99.76 168.91

0.37 0.40 0.59

9.12 9.86 14.54

nr nr nr

64.50 109.62 183.45

Extra over stainless steel pipes; compression fittings

Reducer 22 x 15mm 28 x 22mm 35 x 28mm 42 x 35mm

dia. dia. dia. dia.

Material Costs/Prices for Measured Works – Mechanical Installations

202

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd PRESS FIT (stainless steel) Press fit jointing system; butyl rubber O ring mechanical joint Pipework 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

3.79 6.05 7.46 10.99 13.52 17.21

4.36 6.97 8.59 12.65 15.57 19.81

0.46 0.48 0.52 0.56 0.58 0.66

11.33 11.83 12.81 13.80 14.29 16.26

m m m m m m

15.70 18.79 21.40 26.45 29.86 36.08

Coupling 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

4.45 5.60 6.30 7.83 10.69 12.86

5.12 6.45 7.25 9.01 12.31 14.81

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

13.99 15.32 18.09 19.86 25.12 29.59

Stop end 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

4.23 4.92 8.05 11.30 13.08

4.87 5.66 9.27 13.01 15.06

0.18 0.22 0.22 0.26 0.30

4.43 5.42 5.42 6.41 7.39

nr nr nr nr nr

9.30 11.08 14.69 19.42 22.45

5.30 6.00 6.21 7.58 9.39 9.90 11.32

6.10 6.91 7.15 8.73 10.81 11.40 13.03

0.36 0.40 0.40 0.40 0.44 0.48 0.56

8.87 9.86 9.86 9.86 10.84 11.83 13.80

nr nr nr nr nr nr nr

14.97 16.76 17.01 18.58 21.65 23.22 26.83

6.36 8.89 11.22 17.65 29.47 40.71

7.32 10.24 12.92 20.32 33.93 46.87

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

16.19 19.11 23.76 31.16 46.74 61.65

Fixings For stainless steel pipes Refer to fixings for stainless steel pipes; capillary or compression joints; BS 4127 Extra over stainless steel pipes; Press fit jointing system;

Reducer 22 x 15mm 28 x 15mm 28 x 22mm 35 x 22mm 35 x 28mm 42 x 35mm 54 x 42mm 90° bend 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

dia dia dia dia dia dia dia

Material Costs/Prices for Measured Works – Mechanical Installations

203

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

45° bend 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

8.63 10.73 12.48 14.65 23.58 30.63

9.94 12.35 14.37 16.87 27.15 35.27

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

18.81 21.22 25.21 27.71 39.96 50.05

Equal tee 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia

10.42 12.80 14.95 18.94 26.87 32.17

12.00 14.74 17.21 21.81 30.94 37.04

0.54 0.54 0.66 0.66 0.78 0.90

13.30 13.30 16.26 16.26 19.22 22.17

nr nr nr nr nr nr

25.30 28.04 33.47 38.07 50.15 59.21

10.94 13.26 14.35 17.02 17.76 25.25 26.01 29.38 30.21

12.60 15.27 16.52 19.60 20.45 29.07 29.95 33.83 34.78

0.54 0.62 0.62 0.62 0.62 0.70 0.70 0.82 0.82

13.30 15.28 15.28 15.28 15.28 17.25 17.25 20.20 20.20

nr nr nr nr nr nr nr nr nr

25.90 30.54 31.80 34.87 35.72 46.32 47.19 54.03 54.98

0.67 0.87 1.45 3.47 5.44

0.79 1.03 1.72 4.12 6.45

0.37 0.41 0.47 0.53 0.60

9.12 10.10 11.58 13.06 14.79

m m m m m

9.91 11.13 13.30 17.18 21.24

Reducing tee 22 x 15mm 28 x 15mm 28 x 22mm 35 x 22mm 35 x 28mm 42 x 28mm 42 x 35mm 54 x 35mm 54 x 42mm

dia dia dia dia dia dia dia dia dia

Fixings For stainless steel pipes Refer to fixings for stainless steel pipes; capillary or compression joints; BS 4127 MEDIUM DENSITY POLYETHYLENE – BLUE Note: MDPE is sized on Outside Diameter ie OD not ID Pipes for water distribution; laid underground; electrofusion joints in the running length; BS 6572 Coiled service pipe 20mm dia. 25mm dia. 32mm dia. 50mm dia. 63mm dia.

204

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd MEDIUM DENSITY POLYETHYLENE – BLUE – cont'd Pipes for water distribution; laid underground; electrofusion joints in the running length; BS 6572 – cont'd Mains service pipe 90mm dia. 110mm dia 125mm dia. 160mm dia 180mm dia. 225mm dia 250mm dia. 315mm dia

8.21 12.66 15.55 25.52 32.28 50.52 61.91 98.47

9.74 14.58 18.44 29.38 38.28 58.16 73.42 113.37

0.90 1.10 1.20 1.48 1.50 1.77 1.75 1.90

22.18 27.10 29.58 36.46 36.99 43.61 43.15 46.81

m m m m m m m m

31.91 41.68 48.02 65.85 75.27 101.77 116.57 160.18

5.75 5.75 5.75 8.49 8.16 10.66 15.67 25.20 28.43 45.22 53.17 84.98 124.43 205.20

6.62 6.62 6.62 9.77 9.39 12.27 18.04 29.01 32.73 52.06 61.22 97.84 143.26 236.25

0.36 0.40 0.44 0.48 0.52 0.58 0.67 0.74 0.83 1.00 1.25 1.35 1.50 1.80

8.87 9.86 10.84 11.83 12.81 14.29 16.51 18.23 20.45 24.64 30.80 33.26 36.96 44.35

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

15.49 16.48 17.46 21.60 22.21 26.56 34.55 47.25 53.18 76.70 92.01 131.10 180.22 280.60

10.91 10.91 11.57 16.87 19.35 31.91 64.26 51.30 58.65 98.10 115.87 115.87 219.30

12.56 12.56 13.32 19.42 22.28 36.74 73.98 59.06 67.53 112.94 133.40 133.40 252.49

0.20 0.22 0.24 0.26 0.32 0.37 0.40 0.46 0.50 0.60 0.68 0.75 0.90

4.93 5.42 5.91 6.41 7.88 9.12 9.86 11.33 12.32 14.78 16.75 18.48 22.17

nr nr nr nr nr nr nr nr nr nr nr nr nr

17.49 17.98 19.23 25.83 30.16 45.85 83.84 70.40 79.84 127.73 150.16 151.88 274.66

Extra over fittings; MDPE blue; electrofusion joints Coupler 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia. 90mm dia. 110mm dia 125mm dia. 160mm dia 180mm dia. 225mm dia 250mm dia. 315mm dia Extra over fittings; MDPE blue; butt fused joints Cap 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia. 90mm dia. 110mm dia 125mm dia. 160mm dia 180mm dia. 225mm dia 250mm dia 315mm dia

Material Costs/Prices for Measured Works – Mechanical Installations

205

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Reducer 63 x 32mm dia 63 x 50mm dia 90 x 63mm dia. 110 x 90mm dia 125 x 90mm dia. 125 x 110mm dia 160 x 110mm dia 180 x 125mm dia. 225 x 160mm dia 250 x 180mm dia 315 x 250mm dia

14.74 17.25 21.83 30.07 43.73 48.18 74.03 80.40 131.10 100.73 115.88

16.97 19.86 25.13 34.62 50.35 55.47 85.23 92.57 150.94 115.97 133.42

0.54 0.60 0.67 0.74 0.83 1.00 1.10 1.25 1.40 1.80 2.40

13.30 14.78 16.51 18.23 20.45 24.64 27.10 30.80 34.49 44.35 59.13

nr nr nr nr nr nr nr nr nr nr nr

30.28 34.64 41.64 52.85 70.80 80.11 112.33 123.36 185.43 160.32 192.55

Bend; 45° 50mm dia 63mm dia. 90mm dia. 110mm dia 125mm dia. 160mm dia 180mm dia. 225mm dia 250mm dia 315mm dia

22.50 27.22 42.15 61.80 69.08 128.02 157.05 118.58 143.48 250.43

25.90 31.34 48.53 71.15 79.53 147.39 180.82 136.52 165.19 288.33

0.50 0.58 0.67 0.74 0.83 1.00 1.25 1.40 1.80 2.40

12.32 14.29 16.51 18.23 20.45 24.64 30.80 34.49 44.35 59.13

nr nr nr nr nr nr nr nr nr nr

38.22 45.63 65.04 89.38 99.98 172.03 211.61 171.02 209.54 347.46

Bend; 90° 50mm dia 63mm dia. 90mm dia. 110mm dia 125mm dia. 160mm dia 180mm dia. 225mm dia 250mm dia 315mm dia

22.50 27.22 42.15 61.80 69.08 128.02 157.05 132.00 219.30 430.50

25.90 31.34 48.53 71.15 79.53 147.39 180.82 151.97 252.49 495.65

0.50 0.58 0.67 0.74 0.83 1.00 1.25 1.40 1.80 2.40

12.32 14.29 16.51 18.23 20.45 24.64 30.80 34.49 44.35 59.13

nr nr nr nr nr nr nr nr nr nr

38.22 45.63 65.04 89.38 99.98 172.03 211.61 186.47 296.83 554.78

Equal tee 50mm dia 63mm dia. 90mm dia. 110mm dia 125mm dia. 160mm dia 180mm dia. 225mm dia 250mm dia 315mm dia

24.60 26.85 49.05 73.13 94.42 155.25 158.86 192.53 265.65 662.25

28.32 30.91 56.47 84.20 108.71 178.74 182.90 221.66 305.85 762.47

0.70 0.75 0.87 1.00 1.08 1.35 1.63 1.90 2.70 3.60

17.25 18.48 21.44 24.64 26.61 33.26 40.16 46.81 66.52 88.70

nr nr nr nr nr nr nr nr nr nr

45.57 49.39 77.91 108.83 135.32 212.00 223.06 268.48 372.37 851.16

2.54 2.67 6.33 14.58 21.95

2.92 3.07 7.29 16.79 25.27

0.38 0.45 0.50 0.68 0.85

9.37 11.09 12.32 16.76 20.95

nr nr nr nr nr

12.29 14.16 19.61 33.55 46.22

Extra over plastic fittings, compression joints Straight connector 20mm dia. 25mm dia. 32mm dia. 50mm dia. 63mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

206

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd MEDIUM DENSITY POLYETHYLENE – BLUE – cont'd Extra over plastic fittings, compression joints – cont'd Reducing connector 25mm dia. 32mm dia. 50mm dia. 63mm dia.

5.23 8.44 23.38 32.63

6.02 9.72 26.92 37.57

0.38 0.45 0.50 0.62

9.37 11.09 12.32 15.28

nr nr nr nr

15.39 20.80 39.24 52.85

Straight connector; polyethylene to MI 20mm dia. 25mm dia. 32mm dia. 50mm dia. 63mm dia.

2.30 3.92 4.25 10.85 15.29

2.65 4.51 4.89 12.49 17.60

0.31 0.35 0.40 0.55 0.65

7.64 8.62 9.86 13.55 16.02

nr nr nr nr nr

10.29 13.14 14.75 26.05 33.62

Straight connector; polyethylene to FI 20mm dia. 25mm dia. 32mm dia. 50mm dia. 63mm dia.

3.10 3.35 4.01 12.74 17.85

3.57 3.86 4.62 14.67 20.55

0.31 0.35 0.40 0.55 0.75

7.64 8.62 9.86 13.55 18.48

nr nr nr nr nr

11.21 12.48 14.47 28.22 39.03

Elbow 20mm 25mm 32mm 50mm 63mm

3.39 5.01 7.30 16.94 23.03

3.90 5.77 8.40 19.50 26.52

0.38 0.45 0.50 0.68 0.80

9.37 11.09 12.32 16.76 19.71

nr nr nr nr nr

13.27 16.86 20.72 36.26 46.23

Elbow; polyethylene to MI 25mm dia.

4.31

4.96

0.35

8.62

nr

13.59

Elbow; polyethylene to FI 20mm dia. 25mm dia. 32mm dia. 50mm dia. 63mm dia.

3.08 4.19 6.28 14.91 19.55

3.55 4.82 7.23 17.17 22.51

0.31 0.35 0.42 0.50 0.55

7.64 8.62 10.35 12.32 13.55

nr nr nr nr nr

11.19 13.45 17.58 29.49 36.06

Tank coupling 25mm dia.

6.47

7.45

0.42

10.35

nr

17.80

Equal tee 20mm dia. 25mm dia. 32mm dia. 50mm dia. 63mm dia.

4.56 7.13 8.93 20.84 32.29

5.25 8.21 10.28 23.99 37.18

0.53 0.55 0.64 0.75 0.87

13.06 13.55 15.77 18.48 21.44

nr nr nr nr nr

18.31 21.76 26.05 42.48 58.62

dia. dia. dia. dia. dia.

Material Costs/Prices for Measured Works – Mechanical Installations

207

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Equal tee; FI branch 20mm dia. 25mm dia. 32mm dia. 50mm dia. 63mm dia.

4.42 7.04 8.57 19.74 27.71

5.09 8.11 9.87 22.73 31.90

0.45 0.50 0.60 0.68 0.81

11.09 12.32 14.79 16.76 19.97

nr nr nr nr nr

16.18 20.42 24.65 39.49 51.87

Equal tee; MI branch 25mm dia.

6.91

7.96

0.50

12.32

nr

20.27

Class C (9 bar pressure) 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia. 8" dia.

4.61 7.74 9.84 13.25 27.30 45.00 88.98 152.80

5.31 8.91 11.33 15.26 31.43 51.81 102.44 175.92

0.30 0.33 0.36 0.39 0.46 0.53 0.76 0.97

7.39 8.13 8.87 9.61 11.33 13.06 18.73 23.90

m m m m m m m m

12.70 17.04 20.20 24.86 42.76 64.87 121.17 199.82

Class E (15 bar pressure) 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia.

3.51 5.41 7.13 10.64 14.03 17.58 35.34 56.84

4.04 6.23 8.21 12.25 16.15 20.24 40.69 65.44

0.24 0.27 0.30 0.33 0.36 0.39 0.49 0.57

5.91 6.65 7.39 8.13 8.87 9.61 12.07 14.04

m m m m m m m m

9.95 12.88 15.60 20.38 25.02 29.85 52.76 79.49

1.51 1.74 2.00 3.33 5.14 6.51 19.56 29.91

1.74 2.00 2.30 3.83 5.92 7.50 22.52 34.44

0.16 0.19 0.22 0.25 0.28 0.31 0.36 0.44

3.94 4.68 5.42 6.16 6.90 7.64 8.87 10.84

nr nr nr nr nr nr nr nr

5.68 6.68 7.72 9.99 12.82 15.13 31.39 45.28

ABS PIPEWORK Pipes; solvent welded joints in the running length, brackets measured separately

Fixings Refer to steel pipes; galvanised iron. For minimum fixing dimensions, refer to the Tables and Memoranda at the rear of the book Extra over fittings; solvent welded joints Cap 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia.

208

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd ABS PIPEWORK – cont'd Extra over fittings; solvent welded joints – cont'd Cap - cont'd Elbow 90° 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia. 8" dia.

2.10 2.51 3.51 5.94 7.72 11.74 33.73 50.37 202.78 309.48

2.42 2.89 4.04 6.84 8.89 13.52 38.83 57.99 233.47 356.31

0.29 0.34 0.40 0.45 0.51 0.56 0.65 0.80 1.21 1.45

7.15 8.38 9.86 11.09 12.57 13.80 16.02 19.71 29.81 35.73

nr nr nr nr nr nr nr nr nr nr

9.56 11.27 13.90 17.93 21.45 27.31 54.85 77.70 263.28 392.04

Elbow 45° 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia. 8" dia.

4.06 4.12 5.14 7.52 9.33 12.96 30.50 63.23 131.08 282.08

4.67 4.74 5.92 8.66 10.74 14.92 35.12 72.80 150.92 324.77

0.29 0.34 0.40 0.45 0.51 0.56 0.65 0.80 1.21 1.45

7.15 8.38 9.86 11.09 12.57 13.80 16.02 19.71 29.81 35.73

nr nr nr nr nr nr nr nr nr nr

11.82 13.12 15.77 19.75 23.31 28.72 51.13 92.51 180.73 360.49

Reducing bush 3/4" x 1/2" dia. 1" x 1/2" dia. 1" x 3/4" dia. 1 1/4" x 1" dia. 1 1/2" x 3/4" dia. 1 1/2" x 1" dia. 1 1/2" x 1 1/4" dia. 2" x 1" dia. 2" x 1 1/4" dia. 2" x 1 1/2" dia. 3" x 1 1/2" dia. 3" x 2" dia. 4" x 3" dia. 6" x 4" dia.

1.55 2.00 2.00 2.69 3.51 3.51 3.51 4.61 4.61 4.61 12.96 12.96 17.86 55.02

1.78 2.30 2.30 3.10 4.04 4.04 4.04 5.31 5.31 5.31 14.92 14.92 20.56 63.35

0.42 0.45 0.45 0.48 0.51 0.51 0.51 0.56 0.56 0.56 0.65 0.65 0.80 1.21

10.35 11.09 11.09 11.83 12.57 12.57 12.57 13.80 13.80 13.80 16.02 16.02 19.71 29.81

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

12.13 13.39 13.39 14.92 16.61 16.61 16.61 19.11 19.11 19.11 30.94 30.94 40.27 93.16

Union 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia.

8.35 9.00 12.13 14.88 20.48 26.71

9.61 10.36 13.97 17.13 23.58 30.75

0.34 0.39 0.43 0.50 0.57 0.62

8.38 9.61 10.59 12.32 14.04 15.28

nr nr nr nr nr nr

17.99 19.97 24.56 29.45 37.62 46.03

Material Costs/Prices for Measured Works – Mechanical Installations

209

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Sockets 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia. 8" dia.

1.55 1.74 2.00 3.51 4.23 5.94 23.89 33.91 84.71 169.21

1.78 2.00 2.30 4.04 4.87 6.84 27.51 39.04 97.53 194.82

0.34 0.39 0.43 0.50 0.57 0.62 0.70 0.70 1.26 1.55

8.38 9.61 10.59 12.32 14.04 15.28 17.25 17.25 31.04 38.19

nr nr nr nr nr nr nr nr nr nr

10.16 11.61 12.90 16.36 18.91 22.11 44.75 56.29 128.57 233.01

Barrel nipple 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia.

2.92 3.80 4.92 6.82 8.04 9.74 25.89

3.36 4.38 5.66 7.85 9.26 11.21 29.81

0.34 0.39 0.43 0.50 0.57 0.62 0.70

8.38 9.61 10.59 12.32 14.04 15.28 17.25

nr nr nr nr nr nr nr

11.74 13.98 16.26 20.17 23.30 26.49 47.05

Tee, 90° 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia. 8" dia.

2.39 3.33 4.61 6.62 9.74 14.88 43.37 63.66 222.46 346.86

2.75 3.83 5.31 7.62 11.21 17.13 49.93 73.29 256.12 399.35

0.41 0.47 0.55 0.64 0.71 0.78 0.91 1.12 1.69 2.03

10.10 11.58 13.55 15.77 17.49 19.22 22.42 27.59 41.64 50.02

nr nr nr nr nr nr nr nr nr nr

12.85 15.41 18.86 23.39 28.71 36.35 72.35 100.89 297.76 449.36

Full face flange 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia.

25.91 26.52 28.73 31.93 38.40 51.98 89.12 116.80

29.83 30.53 33.08 36.76 44.21 59.85 102.61 134.47

0.10 0.13 0.15 0.18 0.21 0.29 0.37 0.41

2.46 3.20 3.70 4.43 5.17 7.15 9.12 10.10

nr nr nr nr nr nr nr nr

32.29 33.74 36.77 41.20 49.39 66.99 111.72 144.58

10.79 20.66 36.66 79.33

12.42 23.79 42.21 91.33

0.41 0.47 0.50 1.76

10.10 11.58 12.32 43.36

m m m m

22.52 35.37 54.53 134.70

PVC-U PIPEWORK Pipes; solvent welded joints in the running length, brackets measured separately Class C (9 bar pressure) 2" dia. 3" dia. 4" dia. 6" dia.

210

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd PVC-U PIPEWORK – cont'd Pipes; solvent welded joints in the running length, brackets measured separately – cont'd Class D (12 bar pressure) 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia.

6.28 8.64 13.39 28.68 48.02 89.11

7.23 9.95 15.42 33.02 55.29 102.59

0.41 0.42 0.45 0.48 0.53 0.58

10.10 10.35 11.09 11.83 13.06 14.29

m m m m m m

17.33 20.30 26.50 44.85 68.34 116.88

Class E (15 bar pressure) 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia.

3.07 4.39 5.11 7.50 9.76 15.25 33.03 54.23 117.48

3.53 5.05 5.88 8.63 11.24 17.56 38.03 62.44 135.26

0.38 0.40 0.41 0.41 0.42 0.45 0.47 0.50 0.53

9.36 9.86 10.10 10.10 10.35 11.09 11.58 12.32 13.06

m m m m m m m m m

12.90 14.91 15.98 18.74 21.59 28.65 49.61 74.76 148.32

5.44 7.62 11.62 15.97 19.77 32.86

6.26 8.77 13.38 18.39 22.76 37.83

0.32 0.33 0.40 0.40 0.41 0.43

7.88 8.13 9.86 9.86 10.10 10.59

m m m m m m

14.15 16.90 23.23 28.24 32.86 48.43

1.05 1.22 1.37 2.15 3.61 4.42 13.56 20.94 50.60

1.21 1.40 1.58 2.48 4.16 5.09 15.61 24.11 58.26

0.17 0.19 0.22 0.25 0.28 0.31 0.36 0.44 0.67

4.19 4.68 5.42 6.16 6.90 7.64 8.87 10.84 16.51

nr nr nr nr nr nr nr nr nr

5.40 6.09 7.00 8.63 11.06 12.73 24.48 34.95 74.76

Class 7 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. Fixings Refer to steel pipes; galvanised iron. For minimum fixing dimensions, refer to the Tables and Memoranda at the rear of the book Extra over fittings; solvent welded joints End cap 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia.

Material Costs/Prices for Measured Works – Mechanical Installations

211

S: PIPED SUPPLY SYSTEMS

Item

Socket 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

1.11 1.22 1.43 2.58 3.02 4.29 16.39 23.76 59.59

1.28 1.40 1.65 2.97 3.48 4.94 18.87 27.36 68.61

0.31 0.35 0.42 0.45 0.51 0.56 0.65 0.80 1.21

7.64 8.62 10.35 11.09 12.57 13.80 16.02 19.71 29.81

nr nr nr nr nr nr nr nr nr

8.92 10.03 11.99 14.06 16.04 18.74 34.89 47.07 98.42

Reducing socket 3/4 x 1/2" dia. 1 x 3/4" dia. 1 1/4 x 1" dia. 1 1/2 x 1 1/4" dia. 2 x 1 1/2" dia. 3 x 2" dia. 4 x 3" dia. 6 x 4" dia. 8 x 6" dia.

1.30 1.63 3.11 3.47 5.24 15.94 23.60 86.00 133.20

1.50 1.88 3.58 4.00 6.03 18.35 27.17 99.01 153.36

0.31 0.35 0.42 0.45 0.51 0.56 0.65 0.80 1.21

7.64 8.62 10.35 11.09 12.57 13.80 16.02 19.71 29.81

nr nr nr nr nr nr nr nr nr

9.13 10.50 13.93 15.08 18.60 32.15 43.19 118.72 183.17

Elbow, 90° 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia.

1.47 1.76 2.45 4.29 5.52 8.18 23.60 35.54 140.72

1.69 2.03 2.82 4.94 6.36 9.42 27.17 40.92 162.01

0.31 0.35 0.42 0.45 0.45 0.56 0.65 0.80 1.21

7.64 8.62 10.35 11.09 11.09 13.80 16.02 19.71 29.81

nr nr nr nr nr nr nr nr nr

9.33 10.65 13.17 16.03 17.44 23.22 43.19 60.63 191.83

Elbow 45° 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia.

2.79 2.98 3.61 5.17 6.49 9.14 21.53 44.25 91.30

3.21 3.43 4.16 5.95 7.47 10.52 24.79 50.95 105.12

0.31 0.35 0.45 0.45 0.51 0.56 0.65 0.80 1.21

7.64 8.62 11.09 11.09 12.57 13.80 16.02 19.71 29.81

nr nr nr nr nr nr nr nr nr

10.85 12.05 15.24 17.04 20.04 24.32 40.80 70.66 134.93

Bend 90° (long radius) 3" dia. 4" dia. 6" dia.

65.79 132.90 292.05

75.75 153.01 336.24

0.65 0.80 1.21

16.02 19.71 29.81

nr nr nr

91.76 172.72 366.06

Bend 45° (long radius) 1 1/2" dia. 2" dia. 3" dia. 4" dia.

15.62 25.53 54.56 106.19

17.98 29.39 62.82 122.26

0.51 0.56 0.65 0.80

12.57 13.80 16.02 19.71

nr nr nr nr

30.55 43.19 78.83 141.97

212

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd PVC-U PIPEWORK – cont'd Extra over fittings; solvent welded joints – cont'd Socket union 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia.

5.67 6.49 8.42 10.48 14.37 18.58 69.18 93.66

6.53 7.47 9.69 12.07 16.54 21.39 79.65 107.83

0.34 0.39 0.45 0.50 0.57 0.62 0.70 0.89

8.38 9.61 11.09 12.32 14.04 15.28 17.25 21.93

nr nr nr nr nr nr nr nr

14.91 17.08 20.78 24.39 30.59 36.67 96.90 129.76

Saddle plain 2" x 1 1/4" dia. 3" x 1 1/2" dia. 4" x 2" dia. 6" x 2" dia.

14.60 20.51 23.11 27.13

16.81 23.61 26.61 31.24

0.42 0.48 0.68 0.91

10.35 11.83 16.75 22.42

nr nr nr nr

27.16 35.44 43.36 53.66

Straight tank connector 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia.

3.77 4.26 9.06 23.01 25.23 30.23 30.99

4.34 4.90 10.43 26.49 29.05 34.80 35.68

0.13 0.14 0.14 0.16 0.18 0.24 0.29

3.20 3.45 3.45 3.94 4.43 5.91 7.15

nr nr nr nr nr nr nr

7.54 8.35 13.88 30.43 33.48 40.72 42.82

1.70 2.15 3.24 4.58 6.61 10.48 30.38 44.55 155.17

1.96 2.48 3.73 5.27 7.61 12.07 34.98 51.29 178.65

0.44 0.48 0.54 0.70 0.74 0.80 1.04 1.28 1.93

10.84 11.83 13.30 17.25 18.23 19.71 25.62 31.54 47.55

nr nr nr nr nr nr nr nr nr

12.80 14.30 17.04 22.52 25.84 31.78 60.60 82.83 226.20

Pipe; 3m long; PN25 16 x 2.0mm 20 x 2.3mm 25 x 2.8mm 32 x 3.6mm

3.00 4.54 5.88 8.73

3.45 5.23 6.77 10.05

0.20 0.20 0.20 0.20

4.93 4.93 4.93 4.93

m m m m

8.38 10.15 11.70 14.98

Pipe; 5m long; PN25 40 x 4.5mm 50 x 5.6mm 63 x 7.0mm

10.64 16.03 24.75

12.25 18.46 28.50

0.20 0.20 0.20

4.93 4.93 4.93

m m m

17.18 23.38 33.42

Equal tee 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 3" dia. 4" dia. 6" dia. PVC-C Pipes; solvent welded in the running length, brackets measured separately

Material Costs/Prices for Measured Works – Mechanical Installations

213

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Fixings Refer to steel pipes; galvanised iron. For minimum fixing dimensions, refer to the Tables and Memoranda at the rear of the book Extra over fittings; solvent welded joints Straight coupling; PN25 16mm 20mm 25mm 32mm 40mm 50mm 63mm

0.46 0.65 0.81 2.49 3.20 4.29 7.57

0.53 0.75 0.93 2.87 3.68 4.94 8.72

0.20 0.20 0.20 0.20 0.20 0.20 0.20

4.93 4.93 4.93 4.93 4.93 4.93 4.93

nr nr nr nr nr nr nr

5.46 5.68 5.86 7.79 8.61 9.87 13.64

Elbow; 90°; PN25 16mm 20mm 25mm 32mm 40mm 50mm 63mm

0.75 1.15 1.43 2.98 4.59 6.36 10.87

0.86 1.32 1.65 3.43 5.28 7.32 12.51

0.20 0.20 0.20 0.20 0.20 0.20 0.20

4.93 4.93 4.93 4.93 4.93 4.93 4.93

nr nr nr nr nr nr nr

5.79 6.25 6.57 8.36 10.21 12.25 17.44

Elbow; 45°; PN25 20mm 25mm 32mm 40mm 50mm 63mm

1.15 1.43 2.98 4.59 6.36 10.87

1.32 1.65 3.43 5.28 7.32 12.51

0.20 0.20 0.20 0.20 0.20 0.20

4.93 4.93 4.93 4.93 4.93 4.93

nr nr nr nr nr nr

6.25 6.57 8.36 10.21 12.25 17.44

0.81 0.98 1.96 2.58 2.98 4.52

0.93 1.13 2.26 2.97 3.43 5.20

0.20 0.20 0.20 0.20 0.20 0.20

4.93 4.93 4.93 4.93 4.93 4.93

nr nr nr nr nr nr

5.86 6.06 7.18 7.90 8.36 10.13

1.25 1.71 2.17 3.54 6.12 9.16 15.45

1.44 1.97 2.50 4.08 7.05 10.55 17.79

0.20 0.20 0.20 0.20 0.20 0.20 0.20

4.93 4.93 4.93 4.93 4.93 4.93 4.93

nr nr nr nr nr nr nr

6.37 6.90 7.43 9.00 11.97 15.47 22.72

0.86 1.15 1.67 2.29 3.20 5.10

0.99 1.32 1.92 2.64 3.68 5.87

0.20 0.20 0.20 0.20 0.20 0.20

4.93 4.93 4.93 4.93 4.93 4.93

nr nr nr nr nr nr

5.92 6.25 6.85 7.56 8.61 10.80

Reducer fitting; single stage reduction 20/16mm 25/20mm 32/25mm 40/32mm 50/40mm 63/50mm Equal tee; 90°; PN25 16mm 20mm 25mm 32mm 40mm 50mm 63mm Cap; PN25 20mm 25mm 32mm 40mm 50mm 63mm

214

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd SCREWED STEEL PIPEWORK Galvanised steel pipes; screwed and socketed joints; BS 1387: 1985 Galvanised; medium, fixed vertically, with brackets measured separately, screwed joints are within the running length, but any flanges are additional 10mm dia. 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

3.72 3.35 3.78 5.29 6.54 7.60 10.67 14.46 18.73 26.49 42.13 48.92

4.28 3.86 4.35 6.09 7.53 8.75 12.28 16.65 21.56 30.50 48.51 56.32

0.51 0.52 0.55 0.60 0.67 0.75 0.85 0.93 1.07 1.46 1.72 1.96

12.57 12.81 13.55 14.78 16.51 18.48 20.94 22.91 26.36 35.97 42.38 48.29

m m m m m m m m m m m m

16.85 16.67 17.90 20.87 24.04 27.23 33.23 39.56 47.93 66.47 90.88 104.61

Galvanised; heavy, fixed vertically, with brackets measured separately, screwed joints are within the running length, but any flanges are additional 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

3.97 4.50 6.42 7.96 9.29 12.87 17.48 22.21 30.95 44.85 52.45

4.57 5.18 7.39 9.16 10.70 14.82 20.13 25.57 35.63 51.64 60.39

0.52 0.55 0.60 0.67 0.75 0.85 0.93 1.07 1.46 1.72 1.96

12.81 13.55 14.78 16.51 18.48 20.94 22.91 26.36 35.97 42.38 48.29

m m m m m m m m m m m

17.38 18.73 22.17 25.67 29.17 35.76 43.04 51.93 71.61 94.01 108.68

Galvanised; medium, fixed horizontaly or suspended at high level, with brackets measured separately, screwed joints are within the running length, but any flanges are additional 10mm dia. 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

3.72 3.35 3.78 5.29 6.54 7.60 10.67 14.46 18.73 26.49 42.13 48.92

4.28 3.86 4.35 6.09 7.53 8.75 12.28 16.65 21.56 30.50 48.51 56.32

0.51 0.52 0.55 0.60 0.67 0.75 0.85 0.93 1.07 1.46 1.72 1.96

12.57 12.81 13.55 14.78 16.51 18.48 20.94 22.91 26.36 35.97 42.38 48.29

m m m m m m m m m m m m

16.85 16.67 17.90 20.87 24.04 27.23 33.23 39.56 47.93 66.47 90.88 104.61

Material Costs/Prices for Measured Works – Mechanical Installations

215

S: PIPED SUPPLY SYSTEMS

Item

Galvanised; heavy, fixed horizontaly or suspended at high level, with brackets measured separately, screwed joints are within the running length, but any flanges are additional 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

3.97 4.50 6.42 7.96 9.29 12.87 17.48 22.21 30.95 44.85 52.45

4.57 5.18 7.39 9.16 10.70 14.82 20.13 25.57 35.63 51.64 60.39

0.52 0.55 0.60 0.67 0.75 0.85 0.93 1.07 1.46 1.72 1.96

12.81 13.55 14.78 16.51 18.48 20.94 22.91 26.36 35.97 42.38 48.29

m m m m m m m m m m m

17.38 18.73 22.17 25.67 29.17 35.76 43.04 51.93 71.61 94.01 108.68

Single pipe bracket, screw on, galvanised iron; screwed to wood 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

0.97 1.08 1.26 1.72 2.56 3.39 4.00 6.27 9.07

1.12 1.24 1.45 1.98 2.95 3.90 4.61 7.22 10.44

0.14 0.14 0.17 0.19 0.22 0.22 0.28 0.32 0.35

3.45 3.45 4.19 4.68 5.42 5.42 6.90 7.88 8.62

nr nr nr nr nr nr nr nr nr

4.57 4.69 5.64 6.66 8.37 9.32 11.50 15.10 19.07

Single pipe bracket, screw on, galvanised iron; plugged and screwed 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

0.97 1.08 1.26 1.72 2.56 3.39 4.00 6.27 9.07

1.12 1.24 1.45 1.98 2.95 3.90 4.61 7.22 10.44

0.25 0.25 0.30 0.32 0.32 0.32 0.35 0.42 0.42

6.16 6.16 7.39 7.88 7.88 7.88 8.62 10.35 10.35

nr nr nr nr nr nr nr nr nr

7.28 7.40 8.84 9.86 10.83 11.79 13.23 17.57 20.79

Single pipe bracket for building in, galvanised iron 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

1.03 1.15 1.26 1.33 1.72 2.17

1.19 1.32 1.45 1.53 1.98 2.50

0.10 0.11 0.12 0.14 0.15 0.16

2.46 2.71 2.96 3.45 3.70 3.94

nr nr nr nr nr nr

3.65 4.03 4.41 4.98 5.68 6.44

Fixings For steel pipes; galvanised iron. For minimum fixing dimensions, refer to the Tables and Memoranda at the rear of the book

216

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd SCREWED STEEL PIPEWORK – cont'd For steel pipes; galvanised iron. For minimum fixing dimensions, refer to the Tables and Memoranda at the rear of the book – cont'd Pipe ring, single socket, galvanised iron 15mm dia. 20mm dia. 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

1.03 1.15 1.26 1.33 1.72 2.17 3.16 3.78 5.72 11.57 13.97

1.19 1.32 1.45 1.53 1.98 2.50 3.64 4.35 6.59 13.32 16.08

0.10 0.11 0.12 0.15 0.15 0.16 0.30 0.35 0.40 0.60 0.77

2.46 2.71 2.96 3.70 3.70 3.94 7.39 8.62 9.86 14.79 18.97

nr nr nr nr nr nr nr nr nr nr nr

3.65 4.03 4.41 5.23 5.68 6.44 11.03 12.98 16.44 28.11 35.06

Pipe ring, double socket, galvanised iron 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

9.11 10.48 11.55 12.73 16.08 18.29

10.49 12.07 13.30 14.66 18.51 21.06

0.10 0.11 0.12 0.14 0.15 0.16

2.46 2.71 2.96 3.45 3.70 3.94

nr nr nr nr nr nr

12.95 14.78 16.25 18.11 22.21 25.00

Screw on backplate (Male), galvanised iron; plugged and screwed All sizes 15mm to 50mm x M12

0.81

0.93

0.10

2.46

nr

3.40

Screw on backplate (Female), galvanised iron; plugged and screwed All sizes 15mm to 50mm x M12

0.81

0.93

0.10

2.46

nr

3.40

Galvanised steel; including inserts, bolts, nuts, washers; fixed to backgrounds 41 x 21mm 41 x 41mm

5.08 6.09

5.85 7.01

0.29 0.29

7.15 7.15

m m

12.99 14.16

Threaded rods; metric thread; including nuts, washers etc 10mm dia x 600mm long 12mm dia x 600mm long

1.67 2.57

1.92 2.96

0.18 0.18

4.43 4.43

nr nr

6.36 7.39

Extra Over channel sections for fabricated hangers and brackets

Material Costs/Prices for Measured Works – Mechanical Installations

217

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over steel flanges, screwed and drilled; metric; BS 4504 Screwed flanges; PN6 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

12.74 12.74 12.74 12.74 12.74 13.58 18.89 26.67 31.54 57.86 57.86

14.67 14.67 14.67 14.67 14.67 15.63 21.75 30.71 36.31 66.62 66.62

0.35 0.47 0.53 0.62 0.70 0.84 1.03 1.23 1.41 1.77 2.21

8.62 11.58 13.06 15.28 17.25 20.70 25.38 30.31 34.74 43.61 54.45

nr nr nr nr nr nr nr nr nr nr nr

23.29 26.25 27.73 29.94 31.91 36.33 47.13 61.01 71.05 110.23 121.07

Screwed flanges; PN16 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

16.20 16.20 16.20 17.30 17.30 21.10 26.36 32.10 36.00 63.00 62.00

18.65 18.65 18.65 19.92 19.92 24.29 30.35 36.96 41.45 72.53 71.38

0.35 0.47 0.53 0.62 0.70 0.84 1.03 1.23 1.41 1.77 2.21

8.62 11.58 13.06 15.28 17.25 20.70 25.38 30.31 34.74 43.61 54.45

nr nr nr nr nr nr nr nr nr nr nr

27.27 30.23 31.71 35.19 37.16 44.99 55.73 67.26 76.19 116.14 125.83

21.77 21.77 21.77 21.77 21.77 21.77 25.90 14.69 39.71 84.16

25.06 25.06 25.06 25.06 25.06 25.06 29.82 16.91 45.72 96.90

0.35 0.47 0.53 0.62 0.70 0.84 1.03 1.23 1.41 1.77

8.62 11.58 13.06 15.28 17.25 20.70 25.38 30.31 34.74 43.61

nr nr nr nr nr nr nr nr nr nr

33.69 36.64 38.12 40.34 42.31 45.76 55.20 47.22 80.46 140.51

37.56 47.31 54.27 64.77 122.34 125.83

43.24 54.47 62.48 74.57 140.85 144.87

0.53 0.53 0.53 0.53 0.61 0.90

13.06 13.06 13.06 13.06 15.03 22.17

nr nr nr nr nr nr

56.30 67.53 75.54 87.63 155.88 167.05

Extra over steel flanges, screwed and drilled; imperial; BS 10 Screwed flanges; table E 1/2" dia. 3/4" dia. 1" dia. 1 1/4" dia. 1 1/2" dia. 2" dia. 2 1/2" dia. 3" dia. 4" dia. 5" dia. Extra over steel flange connections Bolted connection between pair of flanges; including gasket, bolts, nuts and washers 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

218

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd SCREWED STEEL PIPEWORK – cont'd Extra over heavy steel tubular fittings; BS 1387 Long screw connection with socket and backnut 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

4.92 6.17 8.08 10.64 12.96 19.11 43.89 56.77 64.40

5.66 7.11 9.30 12.25 14.92 22.00 50.54 65.36 74.14

0.63 0.84 0.95 1.11 1.28 1.53 1.87 2.21 3.05

15.52 20.70 23.41 27.35 31.54 37.70 46.07 54.45 75.15

nr nr nr nr nr nr nr nr nr

21.19 27.80 32.70 39.60 46.45 59.70 96.61 119.81 149.29

Running nipple 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

1.23 1.54 1.65 2.66 3.59 5.46 11.74 18.31 28.68

1.42 1.77 1.90 3.06 4.13 6.28 13.52 21.08 33.03

0.50 0.68 0.77 0.90 1.03 1.23 1.50 1.78 2.38

12.32 16.75 18.97 22.17 25.38 30.31 36.96 43.86 58.64

nr nr nr nr nr nr nr nr nr

13.74 18.53 20.87 25.23 29.51 36.59 50.47 64.93 91.66

Barrel nipple 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

1.03 1.56 1.74 2.89 3.22 4.62 9.84 13.74 24.83 46.15 72.70

1.18 1.79 2.01 3.33 3.71 5.31 11.33 15.82 28.59 53.13 83.70

0.50 0.68 0.77 0.90 1.03 1.23 1.50 1.78 2.38 2.87 3.39

12.32 16.75 18.97 22.17 25.38 30.31 36.96 43.86 58.64 70.71 83.52

nr nr nr nr nr nr nr nr nr nr nr

13.50 18.55 20.98 25.50 29.09 35.62 48.29 59.68 87.23 123.84 167.22

Close taper nipple 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

1.46 1.89 2.48 3.70 4.60 7.06 11.14 18.26 34.71

1.68 2.18 2.85 4.26 5.29 8.12 12.83 21.02 39.96

0.50 0.68 0.77 0.90 1.03 1.23 1.50 1.78 2.38

12.32 16.75 18.97 22.17 25.38 30.31 36.96 43.86 58.64

nr nr nr nr nr nr nr nr nr

14.00 18.93 21.83 26.44 30.67 38.43 49.79 64.88 98.60

Material Costs/Prices for Measured Works – Mechanical Installations

219

S: PIPED SUPPLY SYSTEMS

Item

90° bend with socket 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4.04 5.42 8.30 11.90 14.53 22.60 45.57 67.64 119.94 293.77 441.06

4.65 6.24 9.56 13.70 16.73 26.02 52.47 77.88 138.09 338.23 507.80

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09 3.92 4.74

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13 96.58 116.79

nr nr nr nr nr nr nr nr nr nr nr

20.42 27.18 33.46 41.29 48.52 64.21 99.03 133.07 214.23 434.81 624.59

Plug 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

1.12 1.73 3.05 4.73 5.22 7.47 17.87 33.44 64.20

1.29 2.00 3.51 5.45 6.01 8.60 20.57 38.50 73.91

0.28 0.38 0.44 0.51 0.59 0.70 0.85 1.00 1.44

6.90 9.36 10.84 12.57 14.54 17.25 20.94 24.64 35.48

nr nr nr nr nr nr nr nr nr

8.19 11.36 14.35 18.02 20.55 25.84 41.51 63.14 109.39

Socket 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 150mm dia.

1.23 1.40 1.98 2.86 3.48 5.36 10.63 13.75 25.88 61.78

1.42 1.61 2.28 3.29 4.01 6.17 12.24 15.83 29.80 71.13

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09 4.74

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13 116.79

nr nr nr nr nr nr nr nr nr nr

17.19 22.56 26.18 30.89 35.79 44.36 58.81 71.02 105.93 187.91

Elbow, female/female 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

7.11 9.26 12.57 23.41 27.91 45.76 111.80 133.31 230.85

8.18 10.66 14.48 26.96 32.13 52.68 128.72 153.48 265.78

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

23.95 31.60 38.38 54.55 63.92 90.87 175.28 208.67 341.91

Equal tee 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

8.83 10.26 15.12 31.23 34.00 55.28 133.68 143.46 230.88

10.17 11.81 17.41 35.96 39.14 63.65 153.91 165.17 265.82

0.91 1.22 1.40 1.62 1.86 2.21 2.72 3.21 4.44

22.42 30.06 34.49 39.91 45.83 54.45 67.02 79.09 109.39

nr nr nr nr nr nr nr nr nr

32.59 41.87 51.90 75.87 84.97 118.10 220.93 244.26 375.21

Extra over heavy steel fittings; BS 1740

220

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd SCREWED STEEL PIPEWORK – cont'd Extra over malleable iron fittings; BS 143 Cap 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

2.82 2.96 5.34 10.13 10.88 17.30 29.73 49.05 83.62

3.25 3.41 6.15 11.66 12.53 19.92 34.23 56.47 96.27

0.32 0.43 0.49 0.58 0.66 0.78 0.96 1.13 1.70

7.88 10.59 12.07 14.29 16.26 19.22 23.65 27.84 41.89

nr nr nr nr nr nr nr nr nr

11.13 14.00 18.22 25.95 28.79 39.14 57.88 84.31 138.16

Plain plug, hollow 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

1.37 2.13 3.74 5.79 6.40 9.15 21.88 40.94 78.62

1.58 2.45 4.31 6.67 7.37 10.53 25.19 47.14 90.52

0.28 0.38 0.44 0.51 0.59 0.70 0.85 1.00 1.44

6.90 9.36 10.84 12.57 14.54 17.25 20.94 24.64 35.48

nr nr nr nr nr nr nr nr nr

8.48 11.81 15.15 19.23 21.91 27.78 46.13 71.77 126.00

1.70 1.82 2.41 3.70 4.99 6.55

1.96 2.10 2.77 4.26 5.75 7.54

0.29 0.38 0.44 0.51 0.59 0.70

7.15 9.36 10.84 12.57 14.54 17.25

nr nr nr nr nr nr

9.10 11.46 13.62 16.83 20.28 24.79

0.89 1.19 1.98 4.50 6.21 7.99 17.82 24.36 42.60

1.02 1.37 2.28 5.18 7.15 9.20 20.52 28.05 49.05

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

16.79 22.31 26.18 32.78 38.93 47.39 67.08 83.24 125.18

0.79 1.09 1.69 3.52 5.27 6.17 13.76 20.21 34.71 83.27 155.04

0.91 1.25 1.95 4.05 6.07 7.10 15.84 23.27 39.96 95.87 178.50

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09 4.44 5.79

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13 109.39 142.66

nr nr nr nr nr nr nr nr nr nr nr

16.68 22.20 25.84 31.65 37.85 45.29 62.41 78.46 116.10 205.27 321.16

Plain plug, solid 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. Elbow, male/female 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. Elbow 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

221

S: PIPED SUPPLY SYSTEMS

Item

45° elbow 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 150mm dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

2.05 2.53 3.48 8.11 9.54 13.08 18.38 27.64 53.30 162.21

2.36 2.91 4.01 9.34 10.98 15.06 21.16 31.82 61.37 186.76

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09 5.79

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13 142.66

nr nr nr nr nr nr nr nr nr nr

18.13 23.86 27.91 36.93 42.77 53.25 67.73 87.01 137.50 329.41

Bend, male/female 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

1.57 2.58 3.62 6.12 8.97 16.87 25.82 39.75 98.45

1.81 2.97 4.17 7.05 10.33 19.42 29.73 45.77 113.35

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

17.58 23.91 28.07 34.64 42.11 57.61 76.29 100.96 189.48

Bend, male 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia.

3.59 4.03 5.92 13.10 18.37 27.87

4.13 4.64 6.82 15.08 21.15 32.09

0.64 0.85 0.97 1.12 1.29 1.55

15.77 20.94 23.90 27.59 31.78 38.19

nr nr nr nr nr nr

19.90 25.58 30.71 42.68 52.93 70.28

Bend, female 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

1.61 2.30 3.22 6.28 7.48 11.79 25.82 38.28 80.32 162.05 356.03

1.85 2.65 3.71 7.23 8.61 13.57 29.73 44.07 92.47 186.57 409.91

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09 4.44 5.79

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13 109.39 142.66

nr nr nr nr nr nr nr nr nr nr nr

17.62 23.59 27.61 34.83 40.40 51.76 76.29 99.26 168.61 295.97 552.56

Return bend 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia.

8.22 13.29 16.58 23.02 31.19 47.60

9.46 15.30 19.09 26.50 35.91 54.80

0.64 0.85 0.97 1.12 1.29 1.55

15.77 20.94 23.90 27.59 31.78 38.19

nr nr nr nr nr nr

25.23 36.24 42.99 54.10 67.69 92.99

222

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd SCREWED STEEL PIPEWORK – cont'd Extra over malleable iron fittings; BS 143 – cont'd Equal socket, parallel thread 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

0.77 1.01 1.28 2.84 3.85 5.57 8.84 12.53 20.68

0.89 1.16 1.47 3.27 4.43 6.41 10.18 14.43 23.81

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

16.66 22.11 25.37 30.86 36.22 44.60 56.74 69.62 99.94

Concentric reducing socket 20 x 15mm dia. 25 x 15mm dia. 25 x 20mm dia. 32 x 25mm dia. 40 x 25mm dia. 40 x 32mm dia. 50 x 25mm dia. 50 x 40mm dia. 65 x 50mm dia. 80 x 50mm dia. 100 x 50mm dia. 100 x 80mm dia. 150 x 100mm dia.

1.23 1.61 1.52 2.92 3.85 4.27 7.40 5.98 10.44 13.01 25.96 24.09 72.14

1.42 1.85 1.75 3.36 4.43 4.92 8.52 6.88 12.02 14.98 29.89 27.74 83.06

0.76 0.86 0.86 1.01 1.16 1.16 1.38 1.38 1.69 2.00 2.75 2.75 4.10

18.73 21.19 21.19 24.88 28.58 28.58 34.00 34.00 41.64 49.28 67.76 67.76 101.02

nr nr nr nr nr nr nr nr nr nr nr nr nr

20.14 23.04 22.94 28.25 33.01 33.50 42.52 40.89 53.66 64.26 97.64 95.49 184.07

Eccentric reducing socket 20 x 15mm dia. 25 x 15mm dia. 25 x 20mm dia. 32 x 25mm dia. 40 x 25mm dia. 40 x 32mm dia. 50 x 25mm dia. 50 x 40mm dia. 65 x 50mm dia. 80 x 50mm dia.

2.79 7.93 9.00 11.63 13.33 7.19 8.65 8.65 14.78 15.74

3.21 9.13 10.36 13.39 15.35 8.28 9.96 9.96 17.02 18.12

0.76 0.86 0.86 1.01 1.16 1.16 1.38 1.38 1.69 2.00

18.73 21.19 21.19 24.88 28.58 28.58 34.00 34.00 41.64 49.28

nr nr nr nr nr nr nr nr nr nr

21.94 30.32 31.55 38.27 43.93 36.86 43.96 43.96 58.66 67.40

Hexagon bush 20 x 15mm dia. 25 x 15mm dia. 25 x 20mm dia. 32 x 25mm dia. 40 x 25mm dia. 40 x 32mm dia. 50 x 25mm dia. 50 x 40mm dia. 65 x 50mm dia. 80 x 50mm dia. 100 x 50mm dia. 100 x 80mm dia. 150 x 100mm dia.

0.69 0.95 0.89 1.20 1.80 1.80 3.80 3.55 6.53 9.86 22.83 19.00 68.27

0.79 1.09 1.02 1.38 2.07 2.07 4.38 4.09 7.52 11.35 26.28 21.88 78.60

0.37 0.43 0.43 0.51 0.58 0.58 0.71 0.71 0.84 1.00 1.52 1.52 2.48

9.12 10.59 10.59 12.57 14.29 14.29 17.49 17.49 20.70 24.64 37.45 37.45 61.10

nr nr nr nr nr nr nr nr nr nr nr nr nr

9.91 11.69 11.62 13.95 16.36 16.36 21.87 21.58 28.21 35.99 63.74 59.33 139.70

Material Costs/Prices for Measured Works – Mechanical Installations

223

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Hexagon nipple 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 150mm dia.

0.75 0.85 1.19 2.54 2.92 5.32 8.91 12.32 21.86 60.51

0.86 0.98 1.37 2.92 3.36 6.13 10.26 14.18 25.17 69.67

0.28 0.38 0.44 0.51 0.59 0.70 0.85 1.00 1.44 2.32

6.90 9.36 10.84 12.57 14.54 17.25 20.94 24.64 35.48 57.16

nr nr nr nr nr nr nr nr nr nr

7.76 10.34 12.21 15.49 17.90 23.37 31.20 38.82 60.65 126.83

Union, male/female 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia.

3.74 4.58 5.32 9.40 12.03 18.93 42.35

4.31 5.27 6.13 10.82 13.85 21.79 48.76

0.64 0.85 0.97 1.12 1.29 1.55 1.89

15.77 20.94 23.90 27.59 31.78 38.19 46.57

nr nr nr nr nr nr nr

20.07 26.22 30.02 38.42 45.63 59.98 95.33

Union, female 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

3.55 3.89 4.56 7.86 8.88 13.23 33.90 44.82 85.34

4.09 4.48 5.25 9.05 10.22 15.23 39.03 51.60 98.25

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

19.86 25.42 29.15 36.64 42.01 53.42 85.60 106.79 174.39

5.65 7.07 9.93

6.50 8.14 11.43

0.64 0.85 0.97

15.77 20.94 23.90

nr nr nr

22.27 29.08 35.33

Twin elbow 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia.

5.43 6.00 9.72 19.47 24.65 31.68 51.20 58.11

6.25 6.91 11.19 22.42 28.38 36.47 58.95 66.90

0.91 1.22 1.39 1.62 1.86 2.21 2.72 3.21

22.42 30.06 34.25 39.91 45.83 54.45 67.02 79.09

nr nr nr nr nr nr nr nr

28.67 36.97 45.44 62.33 74.21 90.92 125.96 145.99

Equal tee 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. 125mm dia. 150mm dia.

1.09 1.59 2.28 4.82 6.60 9.50 22.27 25.96 47.06 87.29 208.75

1.25 1.83 2.63 5.55 7.60 10.94 25.64 29.89 54.18 100.50 240.34

0.91 1.22 1.39 1.62 1.86 2.21 2.72 3.21 4.44 5.38 6.31

22.42 30.06 34.25 39.91 45.83 54.45 67.02 79.09 109.39 132.55 155.47

nr nr nr nr nr nr nr nr nr nr nr

23.68 31.89 36.87 45.46 53.43 65.39 92.66 108.98 163.58 233.05 395.81

Union elbow, male/female 15mm dia. 20mm dia. 25mm dia.

224

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd SCREWED STEEL PIPEWORK – cont'd Extra over malleable iron fittings; BS 143 – cont'd Tee reducing on branch 20 x 15mm dia. 25 x 15mm dia. 25 x 20mm dia. 32 x 25mm dia. 40 x 25mm dia. 40 x 32mm dia. 50 x 25mm dia. 50 x 40mm dia. 65 x 50mm dia. 80 x 50mm dia. 100 x 50mm dia. 100 x 80mm dia. 150 x 100mm dia.

1.63 2.22 2.53 4.90 6.21 9.11 8.24 12.81 19.77 26.73 44.25 68.27 153.76

1.88 2.56 2.91 5.64 7.15 10.49 9.49 14.75 22.76 30.77 50.95 78.60 177.03

1.22 1.39 1.39 1.62 1.86 1.86 2.21 2.21 2.72 3.21 4.44 4.44 6.31

30.06 34.25 34.25 39.91 45.83 45.83 54.45 54.45 67.02 79.09 109.39 109.39 155.47

nr nr nr nr nr nr nr nr nr nr nr nr nr

31.94 36.80 37.16 45.56 52.98 56.32 63.94 69.20 89.78 109.86 160.34 188.00 332.50

Equal pitcher tee 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

3.78 4.66 6.98 10.82 16.73 23.49 33.42 52.15 117.33

4.35 5.37 8.04 12.46 19.26 27.04 38.48 60.04 135.09

0.91 1.22 1.39 1.62 1.86 2.21 2.72 3.21 4.44

22.42 30.06 34.25 39.91 45.83 54.45 67.02 79.09 109.39

nr nr nr nr nr nr nr nr nr

26.77 35.42 42.28 52.37 65.09 81.50 105.49 139.13 244.48

3.14 4.91 6.23 9.26 12.46 19.36 27.64 36.76 75.86

3.62 5.65 7.17 10.66 14.35 22.29 31.82 42.32 87.34

1.00 1.33 1.51 1.77 2.02 2.42 2.97 3.50 4.84

24.64 32.77 37.20 43.61 49.77 59.62 73.18 86.23 119.25

nr nr nr nr nr nr nr nr nr

28.25 38.42 44.38 54.27 64.12 81.91 105.00 128.56 206.59

558.98 575.11 614.73 740.00

643.57 662.14 707.75 851.98

1.46 1.45 1.55 1.68

35.97 35.73 38.20 41.39

nr nr nr nr

679.54 697.86 745.95 893.37

Cross 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia. Y11 – PIPELINE ANCILLARIES VALVES Regulators Gunmetal; self-acting two port thermostat; single seat; screwed; normally closed; with adjustable or fixed bleed device 25mm dia. 32mm dia. 40mm dia. 50mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

225

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Self acting temperature regulator for storage calorifier; integral sensing element and pocket; screwed ends 15mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia.

549.97 603.68 779.57 953.65 1114.76

633.19 695.03 897.54 1097.96 1283.45

1.32 1.52 1.79 1.99 2.26

32.52 37.45 44.10 49.03 55.68

nr nr nr nr nr

665.72 732.48 941.64 1146.99 1339.13

Self acting temperature regulator for storage calorifier; integral sensing element and pocket; flanged ends; bolted connection 15mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia.

807.36 924.02 1164.75 1379.56 1601.77

929.53 1063.85 1341.01 1588.32 1844.16

0.61 0.72 0.94 1.03 1.18

15.03 17.74 23.16 25.38 29.07

nr nr nr nr nr

944.56 1081.59 1364.17 1613.70 1873.23

89.11

102.59

0.69

17.00

nr

119.60

Chrome plated thermostatic mixing valves including non-return valves and inlet swivel connections with angle pattern combined isolating valves and strainers; copper compression fittings 15mm dia.

146.23

168.36

0.69

17.00

nr

185.36

Gunmetal thermostatic mixing valves including non-return valves and inlet swivel connections with strainers; copper compression fittings 15mm dia.

184.93

212.91

0.69

17.00

nr

229.91

Gunmetal thermostatic mixing valves including non-return valves and inlet swivel connections with angle pattern combined isolating valves and strainers; copper compression fittings 15mm dia.

194.43

223.85

0.69

17.00

nr

240.85

Bronze, equilibrium; copper float; working pressure cold services up to 16 bar; flanged ends; BS 4504 Table 16/21; bolted connections 25mm dia. 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia.

120.68 167.42 227.07 356.83 382.66 426.67

138.94 192.75 261.43 410.83 440.57 491.24

1.04 1.22 1.38 1.66 1.93 2.16

25.62 30.06 34.00 40.90 47.55 53.22

nr nr nr nr nr nr

164.57 222.81 295.43 451.73 488.12 544.45

Heavy, equilibrium; with long tail and backnut; copper float; screwed for iron 25mm dia. 32mm dia. 40mm dia. 50mm dia.

111.17 152.62 215.16 282.54

127.99 175.72 247.72 325.30

1.58 1.78 1.90 2.65

38.93 43.86 46.81 65.29

nr nr nr nr

166.92 219.57 294.53 390.59

Chrome plated thermostatic mixing valves including non-return valves and inlet swivel connections with strainers; copper compression fittings 15mm dia.

Ball float valves

226

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd VALVES – cont'd Ball float valves – cont'd Brass, ball valve; BS 1212; copper float; screwed 15mm dia. 22mm dia 28mm dia

6.01 10.92 47.58

6.92 12.57 54.78

0.25 0.29 0.35

6.16 7.15 8.62

nr nr nr

13.08 19.72 63.40

12.51 15.35 20.76 37.25 63.29 88.67

14.40 17.67 23.90 42.89 72.87 102.09

0.84 1.01 1.19 1.38 1.62 1.94

20.70 24.88 29.32 34.00 39.91 47.80

nr nr nr nr nr nr

35.10 42.56 53.22 76.89 112.78 149.89

Stopcock; brass head with gun metal body 15mm dia. 22mm dia. 28mm dia.

5.52 10.31 29.31

6.36 11.87 33.75

0.45 0.46 0.54

11.09 11.33 13.30

nr nr nr

17.44 23.20 47.05

Lockshield stop cocks; brass head with gun metal body 15mm dia. 22mm dia. 28mm dia.

6.38 6.38 6.38

7.35 7.35 7.35

0.45 0.46 0.54

11.09 11.33 13.30

nr nr nr

18.43 18.68 20.65

15.13 26.20 43.66

17.42 30.16 50.27

0.45 0.46 0.54

11.09 11.33 13.30

nr nr nr

28.51 41.50 63.57

57.07 75.79 113.21

65.71 87.26 130.34

0.69 0.71 0.81

17.00 17.49 19.96

nr nr nr

82.71 104.75 150.30

Double union stopcock 15mm dia. 22mm dia. 28mm dia.

16.26 22.86 40.67

18.72 26.32 46.82

0.60 0.60 0.69

14.78 14.78 17.00

nr nr nr

33.50 41.10 63.82

Double union DZR stopcock 15mm dia. 22mm dia. 28mm dia.

26.54 32.62 60.31

30.56 37.56 69.44

0.60 0.61 0.69

14.78 15.03 17.00

nr nr nr

45.34 52.59 86.44

Gate valves DZR copper alloy wedge non-rising stem; capillary joint to copper 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. Cocks; capillary joints to copper

DZR stopcock; brass head with gun metal body 15mm dia. 22mm dia. 28mm dia. Gunmetal stopcock 35mm dia. 42mm dia. 54mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

227

S: PIPED SUPPLY SYSTEMS

Item

Double union gun metal stopcock 35mm dia. 42mm dia. 54mm dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

100.48 137.90 216.94

115.69 158.77 249.77

0.63 0.67 0.85

15.52 16.51 20.94

nr nr nr

131.21 175.28 270.71

Double union stopcock with easy clean cover 15mm dia. 22mm dia. 28mm dia.

28.17 35.14 65.34

32.43 40.46 75.23

0.60 0.61 0.69

14.78 15.03 17.00

nr nr nr

47.22 55.49 92.23

Combined stopcock and drain 15mm dia. 22mm dia.

27.94 34.10

32.17 39.26

0.67 0.68

16.51 16.75

nr nr

48.68 56.01

Combined DZR stopcock and drain 15mm dia.

36.93

42.52

0.67

16.51

nr

59.03

12.51 15.35 20.76 37.25 63.29 88.67

14.40 17.67 23.90 42.89 72.87 102.09

0.84 1.01 1.19 1.38 1.62 1.94

20.70 24.88 29.32 34.00 39.91 47.80

nr nr nr nr nr nr

35.10 42.56 53.22 76.89 112.78 149.89

Stopcock; brass head gun metal body 15mm dia. 22mm dia. 28mm dia.

5.02 9.37 26.65

5.78 10.79 30.68

0.42 0.42 0.45

10.35 10.35 11.09

nr nr nr

16.13 21.14 41.77

Lockshield stopcock; brass head gun metal body 15mm dia. 22mm dia. 28mm dia.

5.32 7.61 13.55

6.13 8.76 15.60

0.42 0.42 0.45

10.35 10.35 11.09

nr nr nr

16.47 19.11 26.69

12.61 21.84 36.38 57.07 75.79 113.21

14.52 25.14 41.89 65.71 87.26 130.34

0.38 0.39 0.40 0.52 0.54 0.63

9.36 9.61 9.86 12.81 13.30 15.52

nr nr nr nr nr nr

23.88 34.75 51.74 78.52 100.56 145.86

DZR Lockshield stopcock 15mm dia. 22mm dia.

5.32 8.39

6.13 9.66

0.38 0.39

9.36 9.61

nr nr

15.49 19.27

Combined stop/draincock 15mm dia. 22mm dia.

27.94 35.95

32.17 41.39

0.22 0.45

5.42 11.09

nr nr

37.59 52.48

Gate valve DZR copper alloy wedge non-rising stem; compression joint to copper 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia. Cocks; compression joints to copper

DZR Stopcock 15mm dia. 22mm dia. 28mm dia. 35mm dia. 42mm dia. 54mm dia.

228

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd VALVES – cont'd Cocks; compression joints to copper – cont'd DZR Combined stop/draincock 15mm dia. 22mm dia.

36.93 47.85

42.52 55.09

0.41 0.42

10.10 10.35

nr nr

52.62 65.44

Stopcock to polyethylene 15mm dia. 20mm dia. 25mm dia.

19.30 24.32 32.34

22.22 28.00 37.23

0.38 0.39 0.40

9.36 9.61 9.86

nr nr nr

31.58 37.61 47.09

Draw off coupling 15mm dia.

11.72

13.49

0.38

9.36

nr

22.86

DZR Draw off coupling 15mm dia. 22mm dia.

11.72 13.57

13.49 15.62

0.38 0.39

9.36 9.61

nr nr

22.86 25.23

Draw off elbow 15mm dia. 22mm dia.

12.87 15.86

14.82 18.26

0.38 0.39

9.36 9.61

nr nr

24.18 27.87

Lockshield drain cock 15mm dia.

13.46

15.50

0.41

10.10

nr

25.60

81.76 93.16 152.77

94.13 107.26 175.89

1.38 1.62 1.94

34.00 39.91 47.80

nr nr nr

128.13 147.17 223.69

Check valves DZR copper alloy and bronze, WRC approved cartridge double check valve; BS 6282; working pressure cold services up to 10 bar at 65°C; screwed ends 32mm dia. 40mm dia. 50mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

229

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

3972.10 4716.87 5763.09 13015.73 16260.78 4521.82 5763.09 6366.01 14537.18 17856.71 4947.39 6362.46 6773.85 15870.67 19293.04

4573.18 5430.65 6635.19 14985.34 18721.44 5206.08 6635.19 7329.35 16737.02 20558.88 5696.05 7325.26 7798.90 18272.30 22212.56

9.38 9.38 10.38 10.38 12.38 9.38 9.38 10.38 10.38 12.38 9.38 9.38 10.38 10.38 12.38

231.11 231.11 255.75 255.75 305.02 231.11 231.11 255.75 255.75 305.02 231.11 231.11 255.75 255.75 305.02

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

4804.29 5661.76 6890.94 15241.08 19026.47 5437.19 6866.30 7585.09 16992.77 20863.90 5927.16 7556.37 8054.65 18528.05 22517.58

209.93 231.08 305.08 305.08 305.08 392.67 305.08 392.67 305.08 392.67 1088.92

241.70 266.05 351.25 351.25 351.25 452.09 351.25 452.09 351.25 452.09 1253.70

3.50 3.50 3.50 4.00 4.00 4.00 4.50 4.50 5.00 5.00 5.00

86.23 86.23 86.23 98.55 98.55 98.55 110.87 110.87 123.19 123.19 123.19

nr nr nr nr nr nr nr nr nr nr nr

327.93 352.28 437.48 449.80 449.80 550.64 462.12 562.96 474.44 575.28 1376.89

319.54

367.89

-

nr

-

398.71 437.99 592.04 592.04 592.04 758.17 592.04 758.17 592.04 758.17 2014.73

459.04 504.27 681.63 681.63 681.63 872.90 681.63 872.90 681.63 872.90 2319.61

5.00 5.00 5.00 5.50 5.50 5.50 6.00 6.00 6.50 6.50 7.00

nr nr nr nr nr nr nr nr nr nr nr

582.24 627.46 804.82 817.14 817.14 1008.41 829.46 1020.73 841.78 1033.05 2492.08

333.85

384.37

-

-

nr

-

1589.78

1830.35

4.00

98.55

nr

1928.91

Y20 – PUMPS Packaged cold water pressure booster set; fully automatic; 3 phase supply; includes fixing in position; electrical work elsewhere. Pressure booster set 0.75 l/s @ 30m head 1.5 l/s @ 30m head 3 l/s @ 30m head 6 l/s @ 30m head 12 l/s @ 30m head 0.75 l/s @ 50m head 1.5 l/s @ 50m head 3 l/s @ 50m head 6 l/s @ 50m head 12 l/s @ 50m head 0.75 l/s @ 70m head 1.5 l/s @ 70m head 3 l/s @ 70m head 6 l/s @ 70m head 12 l/s @ 70m head Automatic sump pump for clear and drainage water; single stage centrifugal pump, presure tight electric motor; single phase supply; includes fixing in position; electrical work elsewhere Single pump 1 l/s @ 2.68m total head 1 l/s @ 4.68m total head 1 l/s @ 6.68m total head 2 l/s @ 4.38m total head 2 l/s @ 6.38m total head 2 l/s @ 8.38m total head 3 l/s @ 3.7m total head 3 l/s @ 5.7m total head 4 l/s @ 2.9m total head 4 l/s @ 4.9m total head 4 l/s @ 6.9m total head Extra for high level alarm box with single float switch, local alarm and volt free contacts for remote alarm. Duty/standby pump unit 1 l/s @ 2.68m total head 1 l/s @ 4.68m total head 1 l/s @ 6.68 total head 2 l/s @ 4.38m total head 2 l/s @ 6.38m total head 2 l/s @ 8.38m total head 3 l/s @ 3.7m total head 3 l/s @ 5.7m total head 4 l/s @ 2.9m total head 4 l/s @ 4.9m total head 4 /s @ 6.9m total head Extra for 4nr float switches to give pump on, off and high level alarm Extra for dual pump control panel, internal wall mounted IP54, including volt free contacts

123.19 123.19 123.19 135.51 135.51 135.51 147.83 147.83 160.15 160.15 172.47

230

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd Y21 – TANKS Cisterns; fibreglass; complete with ball valve, fixing plate and fitted covers Rectangular 70 litres capacity 110 litres capacity 170 litres capacity 280 litres capacity 420 litres capacity 710 litres capacity 840 litres capacity 1590 litres capacity 2275 litres capacity 3365 litres capacity 4545 litres capacity

224.72 233.59 246.89 402.12 421.34 694.85 844.17 606.00 754.00 949.00 1103.00

258.73 268.94 284.25 462.97 485.10 800.00 971.91 697.70 868.10 1092.61 1269.91

1.33 1.40 1.61 1.61 1.99 3.31 3.60 13.32 20.18 24.50 29.91

32.77 34.49 39.67 39.67 49.03 81.55 88.70 328.18 497.20 603.64 736.93

nr nr nr nr nr nr nr nr nr nr nr

291.49 303.43 323.92 502.64 534.13 881.55 1060.61 1025.89 1365.30 1696.25 2006.85

Rectangular 18 litres capacity 68 litres capacity 91 litres capacity 114 litres capacity 182 litres capacity 227 litres capacity

55.92 75.35 75.84 84.38 111.44 141.94

64.38 86.75 87.32 97.15 128.30 163.42

1.00 1.00 1.00 1.00 1.00 1.00

24.64 24.64 24.64 24.64 24.64 24.64

nr nr nr nr nr nr

89.02 111.39 111.95 121.79 152.94 188.06

Circular 114 litres capacity 227 litres capacity 318 litres capacity 455 litres capacity

78.94 80.49 133.88 153.88

90.89 92.67 154.14 177.17

1.00 1.00 1.00 1.00

24.64 24.64 24.64 24.64

nr nr nr nr

115.52 117.31 178.78 201.80

Cisterns; polypropylene; complete with ball valve, fixing plate and cover; includes placing in position

Steel sectional water storage tank; hot pressed steel tank to BS 1564 TYPE 1; 5mm plate; pre-insulated and complete with all connections and fittings to comply with BSEN 13280; 2001 and WRAS water supply (water fittings) regulations 1999; externally flanged base and sides; cost of erection (on prepared base) is included within the net price, labour cost allows for offloading and positioning materials Note: Prices are based on the most economical tank size for each volume, and the cost will vary with differing tank dimensions, for the same volume

Material Costs/Prices for Measured Works – Mechanical Installations

231

S: PIPED SUPPLY SYSTEMS

Item

Volume, size 4,900 litres, 3.66m x 1.22m x 1,22m (h) 20,300 litres, 3.66m x 2.4m x 2.4m (h) 52,000 litres, 6.1m x 3.6m x 2.4m (h) 94,000 litres, 7.3m x 3.6m x 3.6m (h) 140,000 litres, 9.7m x 6.1m x 2.44m (h)

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

5781.73 12316.01 21960.04 33037.42 43147.03

6656.65 14179.73 25283.14 38036.81 49676.25

6.00 12.00 19.00 28.00 28.00

147.83 295.66 468.13 689.88 689.88

nr nr nr nr nr

6804.48 14475.39 25751.27 38726.68 50366.13

4138.92 5501.62 7913.51 9874.95 11570.90 14265.22 16435.64 18212.08 20700.25 21095.64 23318.31 24604.75 28359.56 27385.22

4765.24 6334.15 9111.02 11369.28 13321.87 16423.90 18922.76 20968.02 23832.72 24287.94 26846.95 28328.06 32651.07 31529.29

5.00 7.00 10.00 12.00 12.00 14.00 16.00 16.00 16.00 16.00 24.00 24.00 24.00 24.00

123.19 172.47 246.38 295.66 295.66 344.94 394.21 394.21 394.21 394.21 591.32 591.32 591.32 591.32

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

4888.43 6506.62 9357.41 11664.94 13617.53 16768.84 19316.98 21362.24 24226.93 24682.15 27438.27 28919.39 33242.39 32120.61

1595.00 2095.00 2985.00 3575.00 4675.00 5125.00 15950.00

1836.36 2412.03 3436.71 4115.99 5382.44 5900.54 18363.63

1.25 1.45 1.55 1.65 1.75 1.90 3.00

30.80 35.73 38.19 40.65 43.12 46.81 73.92

nr nr nr nr nr nr nr

1867.16 2447.75 3474.89 4156.64 5425.56 5947.35 18437.55

GRP sectional water storage tank; pre-insulated and complete with all connections and fittings to comply with BSEN 13280; 2001 and WRAS water supply (water fittings) regulations 1999; externally flanged base and sides; cost of erection (on prepared base) is included within the net price, labour cost allows for offloading and positioning materials Note: Prices are based on the most economical tank size for each volume, and the cost will vary with differing tank dimensions, for the same volume Volume, size 4,500 litres, 3m x 1m x 1.5m (h) 10,000 litres, 2.5m x 2m x 2m (h) 20,000 litres, 4m x 2.5m x 2m (h) 30,000 litres 5m x 3m x 2m (h) 40,000 litres, 5m x 4m x 2m (h) 50,000 litres, 5m x 4m x 2.5m (h) 60,000 litres, 6m x 4m x 2.5m (h) 70,000 litres, 7m x 4m x 2.5m (h) 80,000 litres, 8m x 4m x 2.5m (h) 90,000 litres, 6m x 5m x 3m (h) 105,000 litres, 7m x 5m x 3m (h) 120,000 litres, 8m x 5m x 3m (h) 135,000 litres, 9m x 6m x 2.5m (h) 144,000 litres, 8m x 6m x 3m (h) Y25 – CLEANING AND CHEMICAL TREATMENT Electromagnetic water conditioner, complete with control box; maximum inlet pressure 16 bar; electrical work elsewhere Connection size, nominal flow rate at 50mbar 20mm dia, 0.3l/s 25mm dia, 0.6l/s 32mm dia, 1.2l/s 40mm dia, 1.7l/s 50mm dia, 3.4l/s 65mm dia, 5.2l/s 100mm dia, 30.5l/s

232

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

2411.75 2769.25 3621.75 3979.25 3951.75 5491.75 6289.25 10543.50 13150.50 14773.00

Simplex configuration Design flow rate, min-max softenend water produced 1l/s, 5.8m3–11.2m3 1.3l/s, 11.7m3–21.4m3 1.3l/s, 15.5m3–28.5m3 1.6l/s, 23.3m3–42.7m3 1.6l/s, 38.8m3–71.2m3 1.9l/s, 11.7m3–21.4m3 3.2l/s, 19.4m3–35.6m3 4.4l/s, 31m3–57m3 5.1l/s, 46.6m3–85.4m3 5.1l/s, 77.7m3–142.4m3 Duplex configuration Design flow rate, min-max softenend water produced 2l/s, 5.8m3–22.4m3 2.6l/s, 11.7m3–42.8m3 2.6l/s, 15.5m3–57m3 3.2l/s, 23.3m3–85.4m3 3.2l/s, 38.8m3–142.4m3 3.8l/s, 11.7m3–42.8m3 6.4l/s, 19.4m3–71.2m3 8.8l/s, 31.1m3–114m3 10.2l/s, 46.6m3–170.8m3 10.2l/s, 77.7m3–284.8m3

Unit

Total rate £

2776.71 3188.31 4169.81 4581.41 4549.75 6322.79 7240.97 12139.00 15140.50 17008.52

1.98 1.98 1.98 2.10 1.98 1.98 2.10 3.60 3.60 3.60

48.78 48.78 48.78 51.74 48.78 48.78 51.74 88.70 88.70 88.70

nr nr nr nr nr nr nr nr nr nr

2825.49 3237.09 4218.60 4633.15 4598.53 6371.57 7292.71 12227.69 15229.20 17097.22

1738.00 2376.00 2706.00 3437.50 3872.00 3905.00 4191.00 4939.00 7359.00 8998.00

2001.00 2735.55 3115.49 3957.68 4457.93 4495.92 4825.20 5686.39 8472.60 10359.62

8.00 8.00 10.00 10.00 12.00 12.00 12.00 15.00 15.00 18.00

197.11 197.11 246.38 246.38 295.66 295.66 295.66 369.58 369.58 443.49

nr nr nr nr nr nr nr nr nr nr

2198.11 2932.66 3361.87 4204.06 4753.59 4791.58 5120.86 6055.97 8842.18 10803.11

2893.00 3927.00 4114.00 5313.00 6347.00 6842.00 7359.00 8437.00 13519.00 16764.00

3330.78 4521.25 4736.55 6116.99 7307.46 7877.37 8472.60 9713.73 15564.76 19300.81

12.00 12.00 15.00 15.00 18.00 18.00 18.00 23.00 23.00 27.00

295.66 295.66 369.58 369.58 443.49 443.49 443.49 566.68 566.68 665.24

nr nr nr nr nr nr nr nr nr nr

3626.44 4816.91 5106.13 6486.57 7750.95 8320.86 8916.09 10280.41 16131.45 19966.05

S10: COLD WATER – cont'd CLEANING AND CHEMICAL TREATMENT – cont'd Ultraviolet water sterillising unit, complete with control unit; UV lamp housed in quartz tube; unit complete with UV intensity sensor, flushing and discharge valve and facilities for remote alarm; electrical work elsewhere Maximum flow rate (@ 250J/m2 exposure), connection size 0.82l/s, 40mm dia 1.28l/s, 40mm dia 2.00l/s, 40mm dia 4.14l/s, 50mm dia 1.28l/s, 40mm dia 2.00l/s, 40mm dia 4.14l/s, 50mm dia 7.4l/s, 80mm dia 16.8l/s 100mm dia 32.3l/s 100mm dia Base exchange water softener complete with resin tank, brine tank and consumption data monitoring facilities Capacities of softeners are based on 300ppm hardness and quoted in m3 of softened water produced. Design flow rates are recommended for continuous use

Material Costs/Prices for Measured Works – Mechanical Installations

233

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4020.50 5698.00 6017.00 7832.00 8998.00 10076.00 10923.00 12529.00 20152.00 25179.00

4628.90 6560.25 6927.52 9017.18 10359.62 11600.75 12575.92 14424.95 23201.50 28989.21

15.00 15.00 18.00 18.00 22.00 22.00 22.00 27.00 27.00 32.00

369.58 369.58 443.49 443.49 542.04 542.04 542.04 665.24 665.24 788.43

nr nr nr nr nr nr nr nr nr nr

4998.48 6929.83 7371.01 9460.67 10901.67 12142.80 13117.97 15090.19 23866.74 29777.64

6mm wall thickness 15mm diameter 22mm diameter 28mm diameter

1.03 1.22 1.54

1.19 1.40 1.77

0.15 0.15 0.15

2.90 2.90 2.90

m m m

4.09 4.31 4.68

9mm wall thickness 15mm diameter 22mm diameter 28mm diameter 35mm diameter 42mm diameter 54mm diameter

1.18 1.49 1.58 1.79 2.05 2.12

1.36 1.72 1.82 2.06 2.36 2.44

0.15 0.15 0.15 0.15 0.15 0.15

2.90 2.90 2.90 2.90 2.90 2.90

m m m m m m

4.26 4.62 4.72 4.96 5.26 5.34

13mm wall thickness 15mm diameter 22mm diameter 28mm diameter 35mm diameter 42mm diameter 54mm diameter 67mm diameter 76mm diameter 108mm diameter

1.51 1.86 2.21 2.38 2.80 3.90 5.76 6.78 7.10

1.74 2.14 2.54 2.74 3.22 4.49 6.63 7.81 8.17

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15

2.90 2.90 2.90 2.90 2.90 2.90 2.90 2.90 2.90

m m m m m m m m m

4.64 5.04 5.45 5.64 6.13 7.39 9.53 10.71 11.08

19mm wall thickness 15mm diameter 22mm diameter 28mm diameter 35mm diameter 42mm diameter 54mm diameter 67mm diameter 76mm diameter 108mm diameter

2.46 2.99 4.06 4.70 5.55 7.02 8.42 9.72 13.27

2.83 3.44 4.67 5.41 6.39 8.08 9.69 11.19 15.28

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.22 0.22

2.90 2.90 2.90 2.90 2.90 2.90 2.90 4.26 4.26

m m m m m m m m m

5.74 6.35 7.58 8.31 9.29 10.99 12.60 15.45 19.54

Triplex configuration Design flow rate, min-max softenend water produced 3l/s, 5.8m3-33.6m3 3.9l/s, 11.7m3-64.2m3 3.9l/s, 15.5m3-85.5m3 4.8l/s, 23.3m3-128.1m3 4.8l/s, 38.8m3-213.6m3 5.7l/s, 11.7m3-64.2m3 9.6l/s, 19.4m3-106.8m3 13.2l/s, 31.1m3-171.0m3 15.3l/s, 46.6m3-256.2m3 15.3l/s, 77.7m3-427.2m3 Y50 – THERMAL INSULATION Flexible closed cell walled insulation; Class 1/Class O; adhesive joints; including around fittings

234

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S10: COLD WATER – cont'd THERMAL INSULATION – cont'd Flexible closed cell walled insulation; Class 1/Class O; adhesive joints; including around fittings – cont'd 25mm wall thickness 15mm diameter 22mm diameter 28mm diameter 35mm diameter 42mm diameter 54mm diameter 67mm diameter 76mm diameter

4.82 5.28 5.97 6.62 7.06 8.30 11.18 12.60

5.55 6.08 6.87 7.62 8.13 9.56 12.87 14.51

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.22

2.90 2.90 2.90 2.90 2.90 2.90 2.90 4.26

m m m m m m m m

8.45 8.98 9.78 10.52 11.03 12.46 15.77 18.76

32mm wall thickness 15mm diameter 22mm diameter 28mm diameter 35mm diameter 42mm diameter 54mm diameter 76mm diameter

6.04 6.62 7.68 7.93 9.22 11.61 17.36

6.95 7.62 8.84 9.13 10.62 13.37 19.99

0.15 0.15 0.15 0.15 0.15 0.15 0.22

2.90 2.90 2.90 2.90 2.90 2.90 4.26

m m m m m m m

9.86 10.52 11.75 12.03 13.52 16.27 24.24

Note: For mineral fibre sectional insulation; bright class O foil faced; bright class O foil taped joints; 19mm aluminium bands rates, refer to section T31 – Low Temperature Hot Water Heating, Y50 Thermal Insluation Note: For mineral fibre sectional insulation; bright class O foil faced; bright class O foil taped joints; 22 swg plain/embossed aluminium cladding; pop riveted rates, refer to section T31 – Low Temperature Hot Water Heating, Y50 Thermal Insluation Note: For mineral fibre sectional insulation; bright class O foil faced; bright class O foil taped joints; 0.8mm polyisobutylene sheeting; welded joints rates, refer to section T31 – Low Temperature Hot Water Heating, Y50 Thermal Insluation

Material Costs/Prices for Measured Works – Mechanical Installations

235

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S11: HOT WATER Y10 – PIPELINES Note: For pipework prices refer to section S10: Cold Water Y11 – PIPELINE ANCILLARIES Note: For prices for ancillaries refer to section S10: Cold Water Y23 – STORAGE CYLINDERS/CALORIFIERS CYLINDERS Insulated copper storage cylinders; BS 699; includes placing in position Grade 3 (maximum 10m working head) BS size 6; 115 litres capacity; 400mm dia.; 1050mm high BS size 7; 120 litres capacity; 450mm dia.; 900mm high BS size 8; 144 litres capacity; 450mm dia.; 1050mm high

174.97

201.45

1.50

36.99

nr

238.44

206.87

238.17

2.00

49.28

nr

287.45

219.91

253.19

2.80

69.01

nr

322.20

135.47

155.97

1.50

36.99

nr

192.96

142.37

163.91

1.50

36.99

nr

200.91

169.95

195.67

1.50

36.99

nr

232.66

248.50

286.10

1.50

36.99

nr

323.10

Tested to 2.2 bar, 15m maximum head 144 litres 160 litres 200 litres 255 litres 290 litres 370 litres 450 litres

770.17 870.65 897.42 1021.31 1379.60 1580.54 2153.02

886.72 1002.40 1033.22 1175.86 1588.37 1819.72 2478.83

3.00 3.00 3.76 3.76 3.76 4.50 5.00

73.99 73.99 92.63 92.63 92.63 110.98 123.19

nr nr nr nr nr nr nr

960.71 1076.39 1125.85 1268.49 1680.99 1930.70 2602.02

Tested to 2.55 bar, 17m maximum head 550 litres 700 litres 800 litres 900 litres 1000 litres 1250 litres 1500 litres 2000 litres 3000 litres

2331.29 2725.50 3152.38 3411.20 3599.77 3942.57 6038.77 7247.06 10179.63

2684.07 3137.94 3629.41 3927.40 4144.51 4539.18 6952.59 8343.72 11720.06

5.00 6.02 6.54 8.00 8.00 13.16 15.15 17.24 24.39

123.19 148.42 161.03 197.11 197.11 324.19 373.31 424.80 600.94

nr nr nr nr nr nr nr nr nr

2807.26 3286.36 3790.45 4124.51 4341.61 4863.37 7325.90 8768.52 12321.00

Grade 4 (maximum 6m working head) BS size 2; 96 litres capacity; 400mm dia.; 900mm high BS size 7; 120 litres capacity; 450mm dia.; 900mm high BS size 8; 144 litres capacity; 450mm dia.; 1050mm high BS size 9; 166 litres capacity; 450mm dia.; 1200mm high Storage cylinders; brazed copper construction; to BS 699; screwed bosses; includes placing in position

236

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S11: HOT WATER – cont'd CYLINDERS – cont'd Indirect cylinders; copper; bolted top; up to 5 tappings for connections; BS 1586; includes placing in position Grade 3, tested to 1.45 bar, 10m maximum head 74 litres capacity 96 litres capacity 114 litres capacity 117 litres capacity 140 litres capacity 162 litres capacity 190 litres capacity 245 litres capacity 280 litres capacity 360 litres capacity 440 litres capacity

353.12 359.51 369.14 383.14 394.81 552.11 603.50 706.21 1251.88 1354.61 1572.89

406.56 413.91 425.00 441.12 454.55 635.66 694.82 813.08 1441.32 1559.60 1810.91

1.50 1.50 1.50 2.00 2.50 3.00 3.51 3.80 4.00 4.50 4.50

36.99 36.99 36.99 49.28 61.60 73.99 86.45 93.68 98.55 110.98 110.98

nr nr nr nr nr nr nr nr nr nr nr

443.55 450.91 461.99 490.40 516.15 709.65 781.28 906.76 1539.87 1670.58 1921.89

Grade 2, tested to 2.2 bar, 15m maximum head 117 litres capacity 140 litres capacity 162 litres capacity 190 litres capacity 245 litres capacity 280 litres capacity 360 litres capacity 440 litres capacity

510.37 555.34 635.57 738.34 892.40 1425.22 1572.89 1861.77

587.60 639.38 731.75 850.07 1027.44 1640.89 1810.91 2143.50

2.00 2.50 2.80 3.00 4.00 4.00 4.50 4.50

49.28 61.60 69.01 73.99 98.55 98.55 110.98 110.98

nr nr nr nr nr nr nr nr

636.88 700.97 800.76 924.06 1126.00 1739.44 1921.89 2254.49

Grade 1, tested 3.65 bar, 25m maximum head 190 litres capacity 245 litres capacity 280 litres capacity 360 litres capacity 440 litres capacity

1097.84 1248.65 1765.50 2234.19 2712.42

1263.97 1437.60 2032.66 2572.28 3122.88

3.00 3.00 4.00 4.50 4.50

73.99 73.99 98.55 110.98 110.98

nr nr nr nr nr

1337.96 1511.59 2131.22 2683.26 3233.86

Grade 3, tested to 1.5 bar, 10m maximum head 550 litres capacity 700 litres capacity 800 litres capacity 1000 litres capacity 1500 litres capacity 2000 litres capacity

2283.20 2527.85 2935.56 3669.48 4240.27 5871.17

2628.71 2910.38 3379.78 4224.76 4881.93 6759.62

5.21 6.02 6.54 7.04 10.00 16.13

128.32 148.42 161.03 173.51 246.38 397.39

nr nr nr nr nr nr

2757.03 3058.80 3540.82 4398.28 5128.31 7157.02

Grade 2, tested to 2.55 bar, 15m maximum head 550 litres capacity 700 litres capacity 800 litres capacity 1000 litres capacity 1500 litres capacity 2000 litres capacity

2531.36 3168.17 3343.29 4139.32 5094.55 6368.21

2914.42 3647.59 3849.21 4765.70 5865.48 7331.88

5.21 6.02 6.54 7.04 10.00 16.13

128.32 148.42 161.03 173.51 246.38 397.39

nr nr nr nr nr nr

3042.74 3796.02 4010.25 4939.21 6111.87 7729.27

Indirect cylinders, including manhole; BS 853

Material Costs/Prices for Measured Works – Mechanical Installations

237

S: PIPED SUPPLY SYSTEMS

Item

Grade 1, tested to 4 bar, 25m maximum head 550 litres capacity 700 litres capacity 800 litres capacity 1000 litres capacity 1500 litres capacity 2000 litres capacity

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

2945.28 3343.29 3582.12 4776.17 5731.34 7005.00

3390.97 3849.21 4124.18 5498.92 6598.64 8065.03

5.21 6.02 6.54 7.04 10.00 16.13

128.32 148.42 161.03 173.51 246.38 397.39

nr nr nr nr nr nr

3519.30 3997.64 4285.22 5672.43 6845.02 8462.42

Horizontal; primary LPHW at 82°C/71°C 400 litres capacity 1000 litres capacity 2000 litres capacity 3000 litres capacity 4000 litres capacity 4500 litres capacity

3268.51 5229.59 10459.25 12910.61 15688.83 17680.62

3763.12 6020.96 12042.00 14864.31 18062.94 20356.14

7.04 8.00 14.08 25.00 40.00 50.00

173.51 197.11 347.02 615.96 985.54 1231.92

nr nr nr nr nr nr

3936.63 6218.06 12389.02 15480.27 19048.48 21588.06

Vertical; primary LPHW at 82°C/71°C 400 litres capacity 1000 litres capacity 2000 litres capacity 3000 litres capacity 4000 litres capacity 4500 litres capacity

3683.62 5920.13 11276.37 14095.47 17290.38 19545.68

4241.04 6815.99 12982.77 16228.47 19906.85 22503.43

7.04 8.00 14.08 25.00 40.00 50.00

173.51 197.11 347.02 615.96 985.54 1231.92

nr nr nr nr nr nr

4414.55 7013.10 13329.79 16844.43 20892.38 23735.35

Horizontal; primary LPHW at 82°C/71°C 400 litres capacity 1000 litres capacity 2000 litres capacity 3000 litres capacity 4000 litres capacity 4500 litres capacity

3268.51 5229.59 10459.25 12910.61 15688.83 17680.62

3763.12 6020.96 12042.00 14864.31 18062.94 20356.14

7.04 8.00 14.08 25.00 40.00 50.00

173.51 197.11 347.02 615.96 985.54 1231.92

nr nr nr nr nr nr

3936.63 6218.06 12389.02 15480.27 19048.48 21588.06

Vertical; primary LPHW at 82°C/71°C 400 litres capacity 1000 litres capacity 2000 litres capacity 3000 litres capacity 4000 litres capacity 4500 litres capacity

3683.62 5920.13 11276.37 14095.47 17290.38 19545.68

4241.04 6815.99 12982.77 16228.47 19906.85 22503.43

7.04 8.00 14.08 25.00 40.00 50.00

173.51 197.11 347.02 615.96 985.54 1231.92

nr nr nr nr nr nr

4414.55 7013.10 13329.79 16844.43 20892.38 23735.35

Storage calorifiers; copper; heater battery capable of raising temperature of contents from 10°C to 65°C in one hour; static head not exceeding 1.35 bar; BS 853; includes fixing in position on cradles or legs

Storage calorifiers; galvanised mild steel; heater battery capable of raising temperature of contents from 10°C to 65°C in one hour; static head not exceeding 1.35 bar; BS 853; includes fixing in position on cradles or legs

238

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S11: HOT WATER – cont'd CYLINDERS – cont'd Indirect cylinders; mild steel, welded throughout, galvanised; with bolted connections; includes placing in position 3.2mm plate 136 litres capacity 159 litres capacity 182 litres capacity 227 litres capacity 273 litres capacity 364 litres capacity 455 litres capacity 683 litres capacity 910 litres capacity

1261.98 1359.08 1669.76 2058.03 2400.69 2795.81 2887.73 4673.22 5427.58

1452.95 1564.74 1922.44 2369.46 2763.97 3218.89 3324.72 5380.40 6248.91

2.50 2.80 3.00 3.00 4.00 4.50 5.00 6.02 7.04

61.60 69.01 73.99 73.99 98.55 110.98 123.19 148.42 173.51

nr nr nr nr nr nr nr nr nr

1514.55 1633.76 1996.43 2443.45 2862.53 3329.87 3447.91 5528.82 6422.42

Unvented multi-point water heater; providing hot water for one or more outlets: Used with conventional taps or mixers: Factory fitted temperature and pressure relief valve: Externally adjustable thermostat: Elemental 'on' indicator: Fitted with 1 metre of 3 core cable: Electrical supply and connection excluded 5 litre capacity, 2.2kW rating 10 litre capacity, 2.2kW rating 15 litre capacity, 2.2kW rating 30 litre capacity, 3kW rating 50 litre capacity, 3kW rating 80 litre capacity, 3kW rating 100 litre capacity, 3kW rating

169.29 188.80 209.80 373.92 393.67 774.62 831.60

194.91 217.37 241.55 430.50 453.24 891.84 957.44

1.50 1.50 1.50 2.00 2.00 2.00 2.00

36.96 36.96 36.96 49.28 49.28 49.28 49.28

nr nr nr nr nr nr nr

231.87 254.33 278.51 479.78 502.52 941.12 1006.72

Accessories Pressure reducing valve and expansion kit Thermostatic blending valve

141.41 75.25

162.81 86.64

2.00 1.00

49.28 24.64

nr nr

212.09 111.28

Y50 – INSULATION Refer to sections S10 – Cold Water and T31 – Low Temperature Hot Water Heating for details Local Electric Hot Water Heaters

Material Costs/Prices for Measured Works – Mechanical Installations

239

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S32: NATURAL GAS Y10 – PIPELINES MEDIUM DENSITY POLYETHELENE – YELLOW Pipe; laid underground; electrofusion joints in the running length; BS 6572; BGT PL2 standards Coiled service pipe 20mm dia. 25mm dia. 32mm dia. 63mm dia. 90mm dia.

1.21 1.58 2.61 9.94 13.05

1.43 1.87 3.10 11.79 15.48

0.37 0.41 0.47 0.60 0.90

9.12 10.10 11.58 14.78 22.18

m m m m m

10.55 11.98 14.68 26.57 37.65

Mains service pipe 63mm dia. 90mm dia. 125mm dia. 180mm dia. 250mm dia.

9.94 13.05 25.20 52.03 95.77

11.44 15.02 29.01 59.90 110.26

0.60 0.90 1.20 1.50 1.75

14.78 22.17 29.57 36.96 43.12

m m m m m

26.23 37.20 58.58 96.86 153.38

7.79 14.64 21.60 40.44 72.82

8.97 16.86 24.87 46.56 83.84

0.47 0.58 0.67 0.83 1.25

11.58 14.29 16.51 20.45 30.80

nr nr nr nr nr

20.55 31.15 41.38 67.01 114.64

Reducing connector 90 x 63mm dia. 125 x 90mm dia. 180 x 125mm dia.

30.15 60.47 110.95

34.71 69.62 127.74

0.67 0.83 1.25

16.51 20.45 30.80

nr nr nr

51.22 90.07 158.54

Bend; 45° 90mm dia. 125mm dia. 180mm dia.

58.28 95.33 216.26

67.10 109.76 248.99

0.67 0.83 1.25

16.51 20.45 30.80

nr nr nr

83.61 130.21 279.78

Bend; 90° 63mm dia. 90mm dia. 125mm dia. 180mm dia.

37.76 58.28 95.33 216.26

43.47 67.10 109.76 248.99

0.58 0.67 0.83 1.25

14.29 16.51 20.45 30.80

nr nr nr nr

57.76 83.61 130.21 279.78

11.12 12.12 13.59 27.30

12.80 13.95 15.65 31.43

0.38 0.45 0.50 0.85

9.37 11.09 12.32 20.95

nr nr nr nr

22.17 25.04 27.97 52.38

Extra over fittings, electrofusion joints Straight connector 32mm dia. 63mm dia. 90mm dia. 125mm dia. 180mm dia.

Extra over malleable iron fittings, compression joints Straight connector 20mm dia. 25mm dia. 32mm dia. 63mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

240

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S32: NATURAL GAS – cont'd MEDIUM DENSITY POLYETHELENE – YELLOW – cont'd Extra over malleable iron fittings, compression joints – cont'd Straight connector; polyethylene to MI 20mm dia. 25mm dia. 32mm dia. 63mm dia.

9.45 10.30 11.51 19.28

10.88 11.86 13.25 22.20

0.31 0.35 0.40 0.65

7.64 8.62 9.86 16.02

nr nr nr nr

18.52 20.48 23.11 38.22

Straight connector; polyethylene to FI 20mm dia. 25mm dia. 32mm dia. 63mm dia.

9.45 11.51 11.51 19.28

10.88 13.25 13.25 22.20

0.31 0.35 0.40 0.75

7.64 8.62 9.86 18.48

nr nr nr nr

18.52 21.88 23.11 40.68

Elbow 20mm 25mm 32mm 63mm

dia. dia. dia. dia.

14.46 15.77 17.67 35.50

16.65 18.16 20.34 40.87

0.38 0.45 0.50 0.80

9.37 11.09 12.32 19.71

nr nr nr nr

26.01 29.24 32.66 60.58

Equal tee 20mm dia. 25mm dia. 32mm dia.

19.28 22.54 28.38

22.20 25.95 32.67

0.53 0.55 0.64

13.06 13.55 15.77

nr nr nr

35.26 39.50 48.45

12.02 15.97 20.54 26.96 36.98 44.69 55.82

13.84 18.39 23.65 31.04 42.58 51.45 64.27

1.73 1.95 2.16 2.44 2.95 3.42 4.00

42.62 48.04 53.22 60.12 72.68 84.26 98.55

m m m m m m m

56.46 66.43 76.87 91.16 115.26 135.72 162.82

SCREWED STEEL For prices for steel pipework refer to section T31 – Low Temperature Hot Water Heating PIPE IN PIPE Note: for pipe in pipe, a sleeve size two pipe sizes bigger than actual pipe size has been allowed. All rates refer to actual pipe size. Black steel pipes – Screwed and socketed joints; BS 1387: 1985 up to 50mm pipe size. Butt welded joints; BS 1387: 1985 65mm pipe size and above. Pipe 25mm 32mm 40mm 50mm 65mm 80mm 100mm

Material Costs/Prices for Measured Works – Mechanical Installations

241

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over black steel pipes – Screwed pipework; black malleable iron fittings; BS 143. Welded pipework; butt welded steel fittings; BS 1965 Bend, 90° 25mm 32mm 40mm 50mm 65mm 80mm 100mm

6.93 10.57 14.80 16.68 22.54 38.41 51.01

7.98 12.17 17.04 19.20 25.95 44.22 58.73

2.91 3.45 5.34 6.53 8.84 10.73 12.76

71.70 85.00 131.57 160.89 217.80 264.37 314.39

m m m m m m m

79.68 97.17 148.61 180.09 243.75 308.59 373.12

Bend, 45° 25mm 32mm 40mm 50mm 65mm 80mm 100mm

8.77 11.37 12.70 15.15 19.78 33.85 43.36

10.10 13.09 14.62 17.44 22.77 38.97 49.92

2.91 3.45 5.34 6.53 8.84 10.73 12.76

71.70 85.00 131.57 160.89 217.80 264.37 314.39

m m m m m m m

81.79 98.09 146.19 178.33 240.58 303.34 364.31

Equal tee 25mm 32mm 40mm 50mm 65mm 80mm 100mm

58.40 59.95 73.76 75.68 100.76 172.88 195.66

67.24 69.02 84.92 87.13 116.01 199.04 225.27

4.18 4.94 7.28 8.48 11.47 14.23 17.92

102.99 121.71 179.37 208.93 282.60 350.60 441.52

m m m m m m m

170.23 190.74 264.29 296.07 398.61 549.65 666.79

7.03 13.87 17.61

8.09 15.97 20.27

0.85 0.96 1.06

20.95 23.67 26.12

m m m

29.04 39.64 46.39

8.13 14.78

9.36 17.02

0.61 0.69

15.03 17.00

m m

24.39 34.02

Copper pipe; capillary or compression joints in the running length; EN1057 R250 (TX) formerly BS 2871 Table X Plastic coated gas service pipe for corrosive environments, fixed vertically or at low level with brackets measured separtely 15mm dia. (yellow) 22mm dia. (yellow) 28mm dia. (yellow) Copper pipe; capillary or compression joints in the running length; EN1057 R250 (TY) formerly BS 2871 Table Y Plastic coated gas and cold water service pipe for corrosive environments, fixed vertically or at low level with brackets measured separately (Refer to Copper Pipe Table X Section) 15mm dia. (yellow) 22mm dia. (yellow)

242

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Single unit Flow, pressure range 0–200 m3/hour, 0.1–2.6 kPa 0–200 m3/hour, 0.1-4.0 kPa 0–200 m3/hour, 0.1–7 kPa 0–200 m3/hour, 0.1–9.5 kPa 0–200 m3/hour 0.1–11.0 kPa 0–400 m3/hour, 0.1–4.0 kPa 0–1000 m3/hour, 0.1–7.4 kPa 50–1000 m3/hour, 0.1–16.0 kPa 50–1000 m3/hour, 0.1–24.5 kPa 50–1000 m3/hour, 0.1–31.0 kPa 50–1000 m3/hour, 0.1–41.0 kPa 50–1000 m3/hour, 0.1–51.0 kPa 100–1800 m3/hour, 3.5–23.5 kPa 100–1800 m3/hour, 4.5–27.0 kPa 100–1800 m3/hour, 6.0–32.5 kPa 100–1800 m3/hour, 7.2–39.0 kPa 100–1800 m3/hour, 9.0–42.0 kPa

3025.38 3452.04 4017.19 4183.43 4673.82 3812.18 5280.53 9865.70 11153.95 12686.05 14002.04 14528.39 14907.99 16079.89 17808.68 20487.73 21534.98

3483.20 3974.42 4625.09 4816.49 5381.09 4389.06 6079.61 11358.63 12841.82 14605.77 16120.90 16726.90 17163.94 18513.18 20503.58 23588.04 24793.76

10.00 10.00 10.00 10.00 10.00 10.00 10.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00

246.38 246.38 246.38 246.38 246.38 246.38 246.38 492.77 492.77 492.77 492.77 492.77 492.77 492.77 492.77 492.77 492.77

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

3729.58 4220.80 4871.48 5062.87 5627.47 4635.44 6325.99 11851.40 13334.59 15098.53 16613.67 17219.67 17656.71 19005.95 20996.35 24080.80 25286.53

Run/Standby unit Flow, pressure range 0–200 m3/hour, 0.1–2.6 kPa 0–200 m3/hour, 0.1–4.0 kPa 0–200 m3/hour, 0.1–7 kPa 0–200 m3/hour, 0.1–9.5 kPa 0–200 m3/hour 0.1–11.0 kPa 0–400 m3/hour, 0.1–4.0 kPa 0–1000 m3/hour, 0.1–7.4 kPa 50–1000 m3/hour, 0.1–16.0 kPa 50–1000 m3/hour, 0.1–24.5 kPa 50–1000 m3/hour, 0.1–31.0 kPa 50–1000 m3/hour, 0.1–41.0 kPa 50–1000 m3/hour, 0.1–51.0 kPa 100–1800 m3/hour, 3.5–23.5 kPa 100–1800 m3/hour, 4.5–27.0 kPa 100–1800 m3/hour, 6.0–32.5 kPa 100–1800 m3/hour, 7.2–39.0 kPa 100–1800 m3/hour, 9.0–42.0 kPa

15560.71 16034.63 16406.00 16812.53 17091.06 18847.59 24024.34 32927.43 37225.93 41514.36 45815.36 45275.50 40425.32 43602.13 45740.08 55551.55 58392.13

17915.43 18461.07 18888.64 19356.69 19677.36 21699.70 27659.82 37910.17 42859.14 47796.52 52748.37 52126.82 46542.68 50200.22 52661.70 63957.89 67228.32

16.00 16.00 16.00 16.00 16.00 16.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00

394.21 394.21 394.21 394.21 394.21 394.21 615.96 615.96 615.96 615.96 615.96 615.96 615.96 615.96 615.96 615.96 615.96

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

18309.65 18855.28 19282.85 19750.90 20071.58 22093.92 28275.78 38526.13 43475.10 48412.48 53364.33 52742.78 47158.64 50816.18 53277.66 64573.85 67844.28

S32: NATURAL GAS – cont'd PIPE IN PIPE – cont'd Fixings Refer to Section S10 Cold Water Extra over copper pipes; capillary fittings; BS 864 Refer to Section S10 Cold Water GAS BOOSTERS Complete skid mounted gas booster set, including AV mounts, flexible connections, low pressure switch,control panel and NRV (for run/standby unit); 3 phase supply; in accordance with IGE/UP/2; includes delivery, offloading and positioning

Material Costs/Prices for Measured Works – Mechanical Installations

243

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S41: FUEL OIL STORAGE/DISTRIBUTION Y10 – PIPELINES For pipework prices refer to Section T31: Low Temperature Hot Water Heating Y21 – TANKS Fuel storage tanks; mild steel; with all necessary screwed bosses; oil resistant joint rings; includes placing in position Rectangular 1360 litres (300 gallon) capacity; 2mm plate 2730 litres (600 gallon) capacity; 2.5mm plate 4550 litres (1000 gallon) capacity; 3mm plate

345.54 461.73 968.04

397.83 531.60 1114.53

12.03 18.60 25.00

296.40 458.27 615.96

nr nr nr

694.23 989.88 1730.49

2259.47 1299.37 822.93 2808.09 1891.31 1010.62 3551.62 2541.00 1183.87 4684.97 3082.43 1400.43 490.87

2601.38 1496.00 947.46 3233.02 2177.51 1163.55 4089.07 2925.52 1363.02 5393.92 3548.88 1612.35 565.15

20.00 30.00 2.00 30.00 40.00 2.00 40.00 55.00 2.00 50.00 65.00 2.00 -

492.77 739.15 49.28 739.15 985.54 49.28 985.54 1355.11 49.28 1231.92 1601.50 49.28 -

nr nr nr nr nr nr nr nr nr nr nr nr nr

3094.15 2235.15 996.74 3972.18 3163.05 1212.83 5074.60 4280.63 1412.30 6625.84 5150.37 1661.63 565.15

Cylindrical; horizontal 1250 litres (285 gallon) capacity 1350 litres (300 gallon) capacity 2500 litres (550 gallon) capacity

279.57 256.85 439.84

321.88 295.72 506.40

3.73 4.30 4.88

91.90 105.95 120.24

nr nr nr

413.78 401.66 626.63

Cylindrical; vertical 1365 litres (300 gallon) capacity 2600 litres (570 gallon) capacity 3635 litres (800 gallon) capacity 5455 litres (1200 gallon) capacity

177.33 269.89 420.76 612.95

204.16 310.73 484.43 705.70

3.73 4.88 4.88 5.95

91.90 120.24 120.24 146.60

nr nr nr nr

296.07 430.97 604.67 852.30

Fuel storage tanks; 5mm plate mild steel to BS 799 type J; complete with raised neck manhole with bolted cover, screwed connections, vent and fill connections, drain valve, gauge and overfill alarm; includes placing in position; excludes pumps and control panel Nominal capacity, size 5,600 litres, 2.5m x 1.5m x 1.5m high Extra for bund unit (internal use) Extra for external use with bund (watertight) 10,200 litres, 3.05m x 1.83m x 1.83m high Extra for bund unit (internal use) Extra for external use with bund (watertight) 15,000 litres, 3.75m x 2m x 2m high Extra for bund unit (internal use) Extra for external use with bund (watertight) 20,000 litres, 4m x 2.5m x 2m high Extra for bund unit (internal use) Extra for external use with bund (watertight) Extra for BMS output (all tank sizes) Fuel storage tanks; plastic; with all necessary screwed bosses; oil resistant joint rings; includes placing in position

244

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S41: FUEL OIL STORAGE/DISTRIBUTION – cont'd TANKS – cont'd Fuel storage tanks; plastic; with all necessary screwed bosses; oil resistant joint rings; includes placing in position – cont'd Bunded tanks 1135 litres (250 gallon) capacity 1590 litres (350 gallon) capacity 2500 litres (550 gallon) capacity 5000 litres (1100 gallon) capacity

568.48 676.29 803.86 1622.12

654.51 778.63 925.50 1867.59

4.30 4.88 5.95 6.53

105.95 120.24 146.60 160.89

nr nr nr nr

760.45 898.87 1072.10 2028.48

203.74 261.29 272.07 280.68

234.57 300.83 313.24 323.15

3.75 3.75 3.75 3.75

92.39 92.39 92.39 92.39

nr nr nr nr

326.97 393.22 405.63 415.55

205.20 240.86 259.91 269.26

236.25 277.31 299.24 310.01

3.25 3.25 3.25 3.25

80.07 80.07 80.07 80.07

nr nr nr nr

316.33 357.38 379.32 390.08

S60: FIRE HOSE REELS Y10 – PIPELINES For pipework prices refer to section S10: Cold water Y11 – PIPELINE ANCILLARIES For prices for ancillaries refer to section S10: Cold water Hose reels; automatic; connection to 25mm screwed joint; reel with 30.5 metres, 19mm rubber hose; suitable for working pressure up to 7 bar Reels Non-swing pattern Recessed non-swing pattern Swinging pattern Recessed swinging pattern Hose reels; manual; connection to 25mm screwed joint; reel with 30.5 metres, 19mm rubber hose; suitable for working pressure up to 7 bar Reels Non-swing pattern Recessed non-swing pattern Swinging pattern Recessed swinging pattern

Material Costs/Prices for Measured Works – Mechanical Installations

245

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S61: DRY RISERS Y10 – PIPELINES For pipework prices refer to section S10: Cold water Y11 – PIPELINE ANCILLARIES VALVES (BS 5041, parts 2 and 3) Bronze/gunmetal inlet breeching for pumping in with 65mm dia. instantaneous male coupling; with cap, chain and 25mm drain valve Double inlet with back pressure valve, flanged to steel Quadruple inlet with back pressure valve, flanged to steel

258.41

297.51

1.75

43.12

nr

340.63

578.59

666.15

1.75

43.12

nr

709.26

Bronze/gunmetal gate type outlet valve with 65mm dia. instantaneous female coupling; cap and chain; wheel head secured by padlock and leather strap Flanged to BS 4504 PN6 (bolted connection to counter flanges measured separately)

207.23

238.59

1.75

43.12

nr

281.71

Bronze/gunmetal landing type outlet valve, with 65mm dia. instantaneous female coupling; cap and chain; wheelhead secured by padlock and leather strap; bolted connections to counter flanges measured separately Horizontal, flanged to BS 4504 PN6 Oblique, flanged to BS 4504 PN6

225.70 225.70

259.85 259.85

1.50 1.50

36.96 36.96

nr nr

296.81 296.81

44.86

51.65

0.55

13.55

nr

65.20

275.02 513.28

316.64 590.95

3.00 3.00

73.92 73.92

nr nr

390.55 664.87

268.57

309.21

3.00

73.92

nr

383.13

Air valve, screwed joints to steel 25mm dia. INLET BOXES (BS 5041, part 5) Steel dry riser inlet box with hinged wire glazed door suitably lettered (fixing by others) 610 x 460 x 325mm; double inlet 610 x 610 x 356mm; quadruple inlet OUTLET BOXES (BS 5041, part 5) Steel dry riser outlet box with hinged wire glazed door suitably lettered (fixing by others) 610 x 460 x 325; single outlet

246

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S63: SPRINKLERS Y10 – PIPELINES Prefabricated black steel pipework; screwed joints, including all couplings, unions and the like to BS 1387:1985; includes fixing to backgrounds, with brackets measured separately Heavy weight 25mm dia 32mm dia 40mm dia 50mm dia

4.91 6.10 7.11 9.87

5.65 7.02 8.19 11.36

0.47 0.53 0.58 0.63

11.58 13.06 14.29 15.52

m m m m

17.23 20.08 22.48 26.89

0.83 0.88 1.14 1.44

0.96 1.01 1.31 1.66

0.12 0.14 0.15 0.16

2.96 3.45 3.70 3.94

nr nr nr nr

3.91 4.46 5.01 5.60

Galvanised steel; including inserts, bolts, nuts, washers; fixed to backgrounds 41 x 21mm 41 x 41mm

5.08 6.09

5.85 7.01

0.29 0.29

7.15 7.15

m m

12.99 14.16

Threaded rods; metric thread; including nuts, washers etc 12mm dia x 600mm long

2.57

2.96

0.18

4.43

nr

7.39

Plain plug, solid 25mm dia 32mm dia 40mm dia 50mm dia

1.75 2.52 3.55 4.66

2.01 2.90 4.09 5.37

0.40 0.44 0.48 0.56

9.86 10.84 11.83 13.80

nr nr nr nr

11.87 13.74 15.91 19.16

Concentric reducing socket 32mm dia 40mm dia 50mm dia

2.08 2.71 3.79

2.39 3.12 4.36

0.48 0.55 0.60

11.83 13.55 14.78

nr nr nr

14.22 16.67 19.15

Elbow; 90° female/female 25mm dia 32mm dia 40mm dia 50mm dia

1.22 2.23 3.75 4.39

1.40 2.57 4.32 5.05

0.44 0.53 0.60 0.65

10.84 13.06 14.78 16.02

nr nr nr nr

12.25 15.63 19.10 21.07

Fixings For steel pipes; black malleable iron. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Pipe ring, single socket, black malleable iron 25mm dia 32mm dia 40mm dia 50mm dia Extra Over channel sections for fabricated hangers and brackets

Extra over for black malleable iron fittings; BS 143

Material Costs/Prices for Measured Works – Mechanical Installations

247

S: PIPED SUPPLY SYSTEMS

Item

Tee 25mm 32mm 40mm 50mm

Net Price £

dia equal dia reducing to 25mm dia dia dia

Material £

Labour hours

Labour £

Unit

Total rate £

1.66 3.03 4.66 6.70

1.91 3.49 5.37 7.71

0.51 0.54 0.65 0.78

12.57 13.30 16.02 19.22

nr nr nr nr

14.48 16.79 21.38 26.93

4.52 6.59 8.48 13.77

5.20 7.59 9.76 15.85

1.16 1.40 1.60 1.68

28.58 34.49 39.42 41.39

nr nr nr nr

33.78 42.08 49.18 57.25

13.43 17.09 23.85 32.27

15.46 19.68 27.46 37.15

0.65 0.70 0.85 1.15

16.02 17.25 20.94 28.33

m m m m

31.48 36.92 48.40 65.49

2.08 2.49 3.77 8.55

2.39 2.87 4.34 9.84

0.30 0.35 0.40 0.77

7.39 8.62 9.86 18.97

nr nr nr nr

9.79 11.49 14.20 28.82

Reducer (one size down) 65mm dia 80mm dia 100mm dia 150mm dia

6.89 8.97 17.89 49.70

7.93 10.33 20.60 57.22

2.70 2.86 3.22 4.20

66.52 70.47 79.34 103.48

nr nr nr nr

74.46 80.79 99.93 160.70

Elbow; 90° 65mm dia 80mm dia 100mm dia 150mm dia

9.48 13.93 17.41 26.11

10.91 16.04 20.04 30.06

3.06 3.40 3.70 5.20

75.39 83.77 91.16 128.12

nr nr nr nr

86.31 99.81 111.21 158.18

Branch bend 65mm dia 80mm dia 100mm dia 150mm dia

9.65 11.30 17.39 44.98

11.11 13.01 20.02 51.79

3.60 3.80 5.10 7.50

88.70 93.63 125.66 184.79

nr nr nr nr

99.81 106.64 145.68 236.57

Cross tee 25mm dia equal 32mm dia 40mm dia 50mm dia Prefabricated black steel pipework; welded joints, including all couplings, unions and the like to BS 1387:1985; fixing to backgrounds Heavy weight 65mm dia 80mm dia 100mm dia 150mm dia Fixings For steel pipes; black malleable iron. For minimum fixing distances, refer to the Tables and Memoranda at the rear of the book Pipe ring, single socket, black malleable iron 65mm dia 80mm dia 100mm dia 150mm dia Extra over fittings

248

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S63: SPRINKLERS – cont'd PIPELINES – cont'd Prefabricated black steel pipe; victaulic joints; including all couplings and the like to BS 1387: 1985; fixing to backgrounds Heavy weight 65mm dia 80mm dia 100mm dia 150mm dia

11.59 15.05 21.94 43.69

13.34 17.33 25.26 50.30

0.70 0.78 0.93 1.25

17.25 19.22 22.91 30.80

m m m m

30.59 36.55 48.17 81.10

Coupling 65mm dia 80mm dia 100mm dia 150mm dia

8.48 9.09 11.91 20.97

9.76 10.47 13.71 24.14

0.26 0.26 0.32 0.35

6.41 6.41 7.88 8.62

nr nr nr nr

16.17 16.87 21.60 32.77

Reducer 65mm dia 80mm dia 100mm dia 150mm dia

6.89 8.97 17.89 26.83

7.93 10.33 20.60 30.89

0.48 0.43 0.46 0.45

11.83 10.59 11.33 11.09

nr nr nr nr

19.76 20.92 31.93 41.98

Elbow; any degree 65mm dia 80mm dia 100mm dia 150mm dia

9.48 13.93 26.86 40.29

10.91 16.04 30.92 46.39

0.56 0.63 0.71 0.80

13.80 15.52 17.49 19.71

nr nr nr nr

24.71 31.56 48.42 66.10

Equal tee 65mm dia 80mm dia 100mm dia 150mm dia

14.69 17.69 32.42 48.63

16.91 20.37 37.33 55.99

0.74 0.83 0.94 1.05

18.23 20.45 23.16 25.87

nr nr nr nr

35.15 40.82 60.49 81.86

Fixings For fixings refer to For steel pipes; black malleable iron. Extra over fittings

Material Costs/Prices for Measured Works – Mechanical Installations

249

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Y11 – PIPELINE ANCILLARIES SPRINKLER HEADS Sprinkler heads; brass body; frangible glass bulb; manufactured to standard operating temperature of 57–141°C; quick response; RTI<50 Conventional pattern; 15mm dia. Sidewall pattern; 15mm dia. Conventional pattern; 15mm dia.; satin chrome plated Sidewall pattern; 15mm dia.; satin chrome plated Fully concealed; fusible link; 15mm dia

3.88 5.70

4.47 6.56

0.15 0.15

3.70 3.70

nr nr

8.16 10.26

4.55

5.24

0.15

3.70

nr

8.93

5.92 14.23

6.82 16.38

0.15 0.15

3.70 3.70

nr nr

10.51 20.08

Wet system alarm valves; including internal non-return valve; working pressure up to 12.5 bar; BS4504 PN16 flanged ends; bolted connections 100mm dia. 150mm dia.

1231.41 1504.19

1417.75 1731.81

25.00 25.00

615.96 615.96

nr nr

2033.71 2347.77

Wet system by-pass alarm valves; including internal non-return valve; working pressure up to 12.5 bar; BS4504 PN16 flanged ends; bolted connections 100mm dia. 150mm dia.

2170.63 2744.41

2499.10 3159.71

25.00 25.00

615.96 615.96

nr nr

3115.06 3775.67

Alternate system wet/dry alarm station; including butterfly valve, wet alarm valve, dry pipe differential pressure valve and pressure gauges; working pressure up to 10.5 bar; BS4505 PN16 flanged ends; bolted connections 100mm dia. 150mm dia.

2690.17 3135.09

3097.26 3609.51

40.00 40.00

985.54 985.54

nr nr

4082.80 4595.04

Alternate system wet/dry alarm station; including electrically operated butterfly valve, water supply accelerator set, wet alarm valve, dry pipe differential pressure valve and pressure gauges; working pressure up to 10.5 bar; BS4505 PN16 flanged ends; bolted connections 100mm dia. 150mm dia.

3066.46 3515.61

3530.49 4047.61

45.00 45.00

1108.73 1108.73

nr nr

4639.22 5156.34

375.35

432.15

6.00

147.83

nr

579.98

VALVES

ALARM/GONGS Water operated motor alarm and gong; stainless steel and aluminum body and gong; screwed connections Connection to sprinkler system and drain pipework

250

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

23296.57 27337.20 33775.83 37288.90

26821.92 31474.00 38886.96 42931.64

24.00 28.00 28.00 32.00

591.32 689.88 689.88 788.43

nr nr nr nr

27413.25 32163.88 39576.83 43720.07

16426.30 20293.08 26222.13 29423.46

18912.01 23363.93 30190.19 33875.97

24.00 28.00 28.00 32.00

591.32 689.88 689.88 788.43

nr nr nr nr

19503.33 24053.81 30880.07 34664.39

25996.96 29066.49 30123.28 34086.84 38442.40 41244.86 40034.48 45282.92 47900.84

29930.95 33464.98 34681.69 39245.03 44259.70 47486.24 46092.70 52135.36 55149.43

14.00 16.00 16.00 24.00 24.00 24.00 24.00 24.00 24.00

344.94 394.21 394.21 591.32 591.32 591.32 591.32 591.32 591.32

nr nr nr nr nr nr nr nr nr

30275.89 33859.19 35075.90 39836.35 44851.02 48077.56 46684.02 52726.68 55740.76

S63: SPRINKLERS – cont'd Y21 – WATER TANKS Note: Prices are based on the most economical tank size for each volume, and the cost will vary with differing tank dimensions, for the same volume Steel sectional sprinkler tank; ordinary hazard, life safety classification; two compartment tank, complete with all fittings and accessories to comply with LPCB type A requirements; cost of erection (on prepared supports) is included within net price, labour cost allows for offloading and positioning of materials Volume, size 70m3, 6.1m x 4.88m x 2.44m (h) 105m3, 7.3m x 6.1m x 2.44m (h) 168m3, 9.76m x 4.88mx 3.66m (h) 211m3, 9.76m x 6.1m x 3.66m (h) Steel sectional sprinkler tank; ordinary hazard, property protection classification; single compartment tank, complete with all fittings and accessories to comply with LPCB type A requirements; cost of erection (on prepared supports) is included within net price, labour cost allows for offloading and positioning of materials Volume, size 70m3, 6.1m x 4.88m x 2.44m (h) 105m3, 7.3m x 6.1m x 2.44m (h) 168m3, 9.76m x 4.88m x 3.66m (h) 211m3, 9.76m x 6.1m x 3.66m (h) GRP sectional sprinkler tank; ordinary hazard, life safety classification; two compartment tank, complete with all fittings and accessories to comply with LPCB type A requirements; cost of erection (on prepared supports) is included within net price, labour cost allows for offloading and positioning of materials Volume, size 55m3, 6m x 4m x 3m (h) 70m3, 6m x 5m x 3m (h) 80m3, 8m x 4m x 3m (h) 105m3, 10m x 4m x 3m (h) 125m3, 10m x 5m x 3m (h) 140m3, 8m x 7m x 3m (h) 135m3, 9m x 6m x 3m (h) 160m3, 13m x 5m x 3m (h) 185m3, 12m x 6m x 3m (h)

Material Costs/Prices for Measured Works – Mechanical Installations

251

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

20000.05 22595.05 24117.19 28253.83 31949.18 33818.63 33074.75 38958.19 40926.22

23026.56 26014.25 27766.72 32529.34 36783.89 38936.23 38079.79 44853.54 47119.38

Labour hours

Labour £

Unit

Total rate £

14.00 16.00 16.00 24.00 24.00 24.00 24.00 24.00 24.00

344.94 394.21 394.21 591.32 591.32 591.32 591.32 591.32 591.32

nr nr nr nr nr nr nr nr nr

23371.50 26408.46 28160.94 33120.66 37375.21 39527.56 38671.11 45444.86 47710.70

GRP sectional sprinkler tank; ordinary hazard, property protection classification; single compartment tank, complete with all fittings and accessories to comply with LPCB type A requirements; cost of erection (on prepared supports) is within net price, labour cost allows for offloading and positioning of materials Volume, size 55m3, 6m x 4m x 3m (h) 70m3, 6m x 5m x 3m (h) 80m3, 8m x 4m x 3m (h) 105m3, 10m x 4m x 3m (h) 125m3, 10m x 5m x 3m (h) 140m3, 8m x 7m x 3m (h) 135m3, 9m x 6m x 3m (h) 160m3, 13m x 5m x 3m (h) 185m3, 12m x 6m x 3m (h)

252

Material Costs/Prices for Measured Works – Mechanical Installations S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

S65: FIRE HYDRANTS EXTINGUISHERS Fire extinguishers; hand held; BS 5423; placed in position Water type; cartridge operated; for Class A fires Water type, 9 litres capacity; 55gm CO2 cartridge; Class A fires (fire rating 13A) Foam type, 9 litres capacity; 75gm CO2 cartridge; Class A & B fires (fire rating 13A:183B) Dry powder type; cartridge operated; for Class A, B & C fires and electrical equipment fires Dry powder type, 1kg capacity; 12gm CO2 cartridge; Class A, B & C fires (fire rating 5A:34B) Dry powder type, 2kg capacity; 28gm CO2 cartridge; Class A, B & C fires (fire rating 13A:55B) Dry powder type, 4kg capacity; 90gm CO2 cartridge; Class A, B & C fires (fire rating 21A:183B) Dry powder type, 9kg capacity; 190gm CO2 cartridge; Class A, B & C fires (fire rating 43A:233B) Dry powder type; stored pressure type; for Class A, B & C fires and electrical equipment fires Dry powder type, 1kg capacity; Class A, B & C fires (fire rating 5A:34B) Dry powder type, 2kg capacity; Class A, B & C fires (fire rating 13A:55B) Dry powder type, 4kg capacity; Class A, B & C fires (fire rating 21A:183B) Dry powder type, 9kg capacity; Class A, B & C fires (fire rating 43A:233B) Carbon dioxide type; for Class B fires and electrical equipment fires CO2 type with hose and horn, 2kg capacity, Class B fires (fire rating 34B) CO2 type with hose and horn, 5kg capacity, Class B fires (fire rating 55B) Glass fibre blanket, in GRP container 1100 x 1100mm 1200 x 1200mm 1800 x 1200mm

82.15

94.58

1.00

24.64

nr

119.22

97.42

112.16

1.00

24.64

nr

136.80

34.74

40.00

1.00

24.64

nr

64.64

46.78

53.86

1.00

24.64

nr

78.50

83.33

95.94

1.00

24.64

nr

120.58

111.65

128.55

1.00

24.64

nr

153.18

32.00

36.84

1.00

24.64

nr

61.48

37.99

43.74

1.00

24.64

nr

68.38

70.96

81.70

1.00

24.64

nr

106.34

91.94

105.85

1.00

24.64

nr

130.49

87.89

101.19

1.00

24.64

nr

125.83

137.72

158.56

1.00

24.64

nr

183.20

27.89 30.57 40.77

32.11 35.20 46.94

0.50 0.50 0.50

12.32 12.32 12.32

nr nr nr

44.43 47.52 59.26

Material Costs/Prices for Measured Works – Mechanical Installations

253

S: PIPED SUPPLY SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

HYDRANTS Fire hydrants; bolted connections Underground hydrants, complete with frost plug to BS 750 sluice valve pattern type 1 screw down pattern type 2

229.37 166.60

264.08 191.81

4.50 4.50

110.87 110.87

nr nr

374.95 302.68

Stand pipe for underground hydrant; screwed base; light alloy Single outlet Double outlet

131.92 193.02

151.88 222.23

1.00 1.00

24.64 24.64

nr nr

176.52 246.87

64mm diameter bronze/gunmetal outlet valves Oblique flanged landing valve Oblique screwed landing valve

144.39 144.39

166.24 166.24

1.00 1.00

24.64 24.64

nr nr

190.88 190.88

Cast iron surface box; fixing by others 400 x 200 x 100mm 500 x 200 x 150mm Frost Plug

126.43 170.35 30.68

145.56 196.13 35.32

1.00 1.00 0.25

24.64 24.64 6.16

nr nr nr

170.20 220.77 41.48

254

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T10: GAS/OIL FIRED BOILERS DOMESTIC Domestic water boilers; stove enamelled casing; electric controls; placing in position; assembling and connecting; electrical work elsewhere Gas fired; floor standing; connected to conventional flue 9 to 12 kW 12 to 15 kW 15 to 18 kW 18 to 21 kW 21 to 23 kW 23 to 29 kW 29 to 37 kW 37 to 41 kW

561.70 590.91 629.38 731.20 810.61 1051.35 1243.49 1293.18

646.70 680.33 724.62 841.85 933.28 1210.45 1431.66 1488.87

8.59 8.59 8.88 9.92 10.66 11.81 11.81 12.68

211.64 211.64 218.79 244.41 262.65 290.98 290.98 312.41

nr nr nr nr nr nr nr nr

858.34 891.97 943.41 1086.26 1195.92 1501.42 1722.64 1801.29

Gas fired; wall hung; connected to conventional flue 9 to 12 kW 12 to 15 kW 13 to 18 kW

493.68 637.37 808.88

568.39 733.82 931.28

8.59 8.59 8.59

211.64 211.64 211.64

nr nr nr

780.03 945.46 1142.93

Gas fired; floor standing; connected to balanced flue 9 to 12 kW 12 to 15 kW 15 to 18 kW 18 to 21 kW 21 to 23 kW 23 to 29 kW 29 to 37 kW

701.66 730.04 785.83 926.03 1068.05 1361.35 2617.06

807.84 840.51 904.75 1066.16 1229.67 1567.36 3013.09

9.16 10.95 11.98 12.78 12.78 15.45 17.65

225.69 269.79 295.17 314.88 314.88 380.66 434.87

nr nr nr nr nr nr nr

1033.53 1110.30 1199.91 1381.04 1544.55 1948.02 3447.95

Gas fired; wall hung; connected to balanced flue 6 to 9 kW 9 to 12 kW 12 to 15kW 15 to 18kW 18 to 22kW

529.78 606.24 686.48 823.13 873.72

609.95 697.98 790.36 947.69 1005.94

9.16 9.16 9.45 9.74 9.74

225.69 225.69 232.83 239.98 239.98

nr nr nr nr nr

835.64 923.67 1023.19 1187.67 1245.91

605.91 675.23 732.99 789.55 1028.75 1332.21 1635.57

697.60 777.41 843.91 909.03 1184.43 1533.81 1883.07

9.16 9.16 10.95 11.98 12.78 15.45 17.65

225.69 225.69 269.79 295.17 314.88 380.66 434.87

nr nr nr nr nr nr nr

923.29 1003.10 1113.70 1204.20 1499.30 1914.47 2317.94

Gas fired; wall hung; connected to fan flue (including flue kit) 6 to 9kW 9 to 12kW 12 to 15kW 15 to 18kW 18 to 23kW 23 to 29kW 29 to 35kW

Material Costs/Prices for Measured Works – Mechanical Installations

255

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Oil fired; floor standing; connected to conventional flue 12 to 15 15 to 19 21 to 25 26 to 32 35 to 50 Fire place mounted natural gas fire and back boiler; cast iron water boiler; electric control box; fire output 3kW with wood surround 10.50kW

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

1052.04 1097.44 1252.49 1373.19 1550.38

1211.24 1263.51 1442.02 1580.99 1784.99

10.38 12.20 14.30 15.80 20.46

255.75 300.59 352.33 389.29 504.10

nr nr nr nr nr

1466.99 1564.10 1794.35 1970.27 2289.09

306.92

353.36

8.88

218.79

nr

572.15

2232.73 2380.49 2692.42 2955.09 3184.93 3464.02 4025.49 5089.32 5910.18 6731.04 7551.89 8044.42 9029.44

2570.60 2740.72 3099.85 3402.27 3666.89 3988.21 4634.65 5859.46 6804.54 7749.61 8694.68 9261.74 10395.82

8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00

197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11

nr nr nr nr nr nr nr nr nr nr nr nr nr

2767.71 2937.82 3296.96 3599.38 3864.00 4185.32 4831.75 6056.57 7001.65 7946.72 8891.79 9458.85 10592.93

7059.38 7584.74 8602.60 9193.61 9850.30 11820.36 13018.81 14282.94 14611.29 17936.35 18264.70 18510.95 18675.12 23600.27 25570.34 26227.03 27376.23 28032.91 28755.27

8127.64 8732.50 9904.39 10584.83 11340.90 13609.08 14988.88 16444.31 16822.34 21755.79 22133.83 22417.35 22606.36 28276.81 30545.00 31301.06 32624.16 33380.22 34211.89

8.00 8.00 8.00 8.00 8.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00

197.11 197.11 197.11 197.11 197.11 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

8324.75 8929.61 10101.50 10781.94 11538.00 13904.74 15284.54 16739.97 17118.00 22051.45 22429.49 22713.01 22902.02 28572.47 30840.66 31596.72 32919.82 33675.88 34507.55

FORCED DRAFT Commercial cast iron sectional floor standing boilers; pressure jet burner; including controls, enamelled jacket, insulation, assembly and commissioning; electrical work elsewhere Gas fired (on/off type), connected to conventional flue 16–26 kW; 3 sections; 125mm dia. flue 26–33 kW; 4 sections; 125mm dia. flue 33–40 kW; 5 sections; 125mm dia. flue 35–50 kW; 3 sections; 153mm dia. flue 50–65 kW; 4 sections; 153mm dia. flue 65-80 kW; 5 sections; 153mm dia. flue 80–100 kW; 6 sections; 180mm dia. flue 100–120 kW; 7 sections; 180mm dia. flue 105–140 kW; 5 sections; 180mm dia. flue 140–180 kW; 6 sections; 180mm dia. flue 180–230 kW; 7 sections; 200mm dia. flue 230–280 kW; 8 sections; 200mm dia. flue 280–330 kW; 9 sections; 200mm dia. flue Gas fired (high/low type), connected to conventional flue 105–140 kW; 5 sections; 180mm dia. flue 140–180 kW; 6 sections; 180mm dia. flue 180–230 kW; 7 sections; 200mm dia. flue 230–280 kW; 8 sections; 200mm dia. flue 280–330 kW; 9 sections; 200mm dia. flue 300–390 kW; 8 sections; 250mm dia. flue 390–450 kW; 9 sections; 250mm dia. flue 450–540 kW; 10 sections; 250mm dia. flue 540–600 kW; 11 sections; 300mm dia. flue 600–670 kW; 12 sections; 300mm dia. flue 670–720 kW; 13 sections; 300mm dia. flue 720–780 kW; 14 sections; 300mm dia. flue 754–812 kW; 14 sections; 400mm dia. flue 812–870 kW; 15 sections; 400mm dia. flue 870–928 kW; 16 sections; 400mm dia. flue 928–986 kW; 17 sections; 400mm dia. flue 986–1044 kW; 18 sections; 400mm dia. flue 1044–1102 kW; 19 sections; 400mm dia. flue 1102–1160 kW; 20 sections; 400mm dia. flue

256

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

30331.32

36026.43

12.00

295.66

nr

36322.09

31886.19

37975.50

12.00

295.66

nr

38271.16

33018.98

39279.71

12.00

295.66

nr

39575.37

34496.52

40980.84

12.00

295.66

nr

41276.50

35481.56

42114.94

12.00

295.66

nr

42410.60

1641.72 1805.88 1970.06 2314.82 2429.74 2528.25 3775.95 4268.46 4925.15 5581.84 6895.21 7551.89 8372.75

1890.15 2079.15 2268.18 2665.11 2797.42 2910.84 4347.35 4914.38 5670.45 6426.51 7938.63 8694.68 9639.76

8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00

197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11

nr nr nr nr nr nr nr nr nr nr nr nr nr

2087.26 2276.26 2465.29 2862.22 2994.53 3107.94 4544.45 5111.49 5867.56 6623.62 8135.73 8891.79 9836.86

3956.54 4268.46 4760.98 5614.68 8865.28 9850.30 10589.07 11984.53 12591.97 13462.08 15267.97 15514.22 15727.65 21013.98 21818.42 22573.60 23476.55

4555.26 4914.38 5481.44 6464.32 10206.82 11340.90 12191.46 13798.09 14497.45 15499.23 17578.40 17861.91 18107.64 24193.92 25120.09 25989.55 27029.14

8.00 8.00 8.00 8.00 8.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00 12.00

197.11 197.11 197.11 197.11 197.11 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66 295.66

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

4752.37 5111.49 5678.54 6661.43 10403.93 11636.56 12487.12 14093.75 14793.11 15794.89 17874.06 18157.57 18403.30 24489.58 25415.75 26285.21 27324.80

T10: GAS/OIL FIRED BOILERS – cont'd FORCED DRAFT – cont'd Commercial cast iron sectional floor standing boilers; pressure jet burner; including controls, enamelled jacket, insulation, assembly and commissioning; electrical work elsewhere – cont'd Gas fired (high/low type), connected to conventional flue - cont'd 1160–1218 kW; 21 sections; exceeding 400mm dia. flue 1218–1276 kW; 22 sections; exceeding 400mm dia. flue 1276–1334 kW; 23 sections; exceeding 400mm dia. flue 1334–1392 kW; 24 sections; exceeding 400mm dia. flue 1392–1450 kW; 25 sections; exceeding 400mm dia. flue Oil fired (on/off type), connected to conventional flue 16–26 kW; 3 sections; 125mm dia. flue 26–33 kW; 4 sections; 125mm dia. flue 33–40 kW; 5 sections; 125mm dia. flue 35–50 kW; 3 sections; 153mm dia. flue 50–65 kW; 4 sections; 153mm dia. flue 65–80 kW; 5 sections; 153mm dia. flue 80–100 kW; 6 sections; 180mm dia. flue 100–120 kW; 7 sections; 180mm dia. flue 105–140 kW; 5 sections; 180mm dia. flue 140–180 kW; 6 sections; 180mm dia. flue 180–230 kW; 7 sections; 200mm dia. flue 230–280 kW; 8 sections; 200mm dia. flue 280–330 kW; 9 sections; 200mm dia. flue Oil fired (high/low type), connected to conventional flue 105–140 kW; 5 sections; 180mm dia. flue 140–180 kW; 6 sections; 180mm dia. flue 180–230 kW; 7 sections; 200mm dia. flue 230–280 kW; 8 sections; 200mm dia. flue 280–330 kW; 9 sections; 200mm dia. flue 300–390 kW; 8 sections; 250mm dia. flue 390–450 kW; 9 sections; 250mm dia. flue 450–540 kW; 10 sections; 250mm dia. flue 540–600 kW; 11 sections; 300mm dia. flue 600–670 kW; 12 sections; 300mm dia. flue 670–720 kW; 13 sections; 300mm dia. flue 720–780 kW; 14 sections; 300mm dia. flue 754–812 kW; 14 sections; 400mm dia. flue 812–870 kW; 15 sections; 400mm dia. flue 870–928 kW; 16 sections; 400mm dia. flue 928–986 kW; 17 sections; 400mm dia. flue 986-1044 kW; 18 sections; 400mm dia. flue

Material Costs/Prices for Measured Works – Mechanical Installations

257

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

1044–1102 kW; 19 sections; 400mm dia. flue 1102–1160 kW; 20 sections; 400 mm dia. flue 1160–1218 kW; 21 sections; exceeding 400mm dia. flue 1218–1276 kW; 22 sections; exceeding 400mm dia. flue 1276–1334 kW; 23 sections; exceeding 400mm dia. flue 1334–1392 kW; 24 sections; exceeding 400mm dia. flue 1392–1450 kW; 25 sections; exceeding 400mm dia. flue

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

24625.76 26004.80

28352.25 29939.98

12.00 12.00

295.66 295.66

nr nr

28647.91 30235.64

27449.51

31603.31

12.00

295.66

nr

31898.97

28812.14

33172.14

12.00

295.66

nr

33467.80

29830.00

34344.02

12.00

295.66

nr

34639.69

31578.42

36357.02

12.00

295.66

nr

36652.69

32735.84

37689.59

12.00

295.66

nr

37985.25

5886.27 6667.28 7985.44 9732.36

6777.01 7676.21 9193.84 11205.11

8.00 8.00 8.00 8.00

197.11 197.11 197.11 197.11

nr nr nr nr

6974.12 7873.31 9390.94 11402.22

7169.36 7657.09 9152.18 10210.53 12888.28 13151.27 13197.49 17454.80 21736.02 24687.92 29130.12 37778.62

8254.26 8815.80 10537.13 11755.64 14838.60 15141.39 15194.60 20096.15 25025.22 28423.82 33538.24 43495.47

8.00 8.00 8.00 8.00 10.00 10.00 12.00 12.00 12.00 14.00 14.00 14.00

197.11 197.11 197.11 197.11 246.38 246.38 295.66 295.66 295.66 344.94 344.94 344.94

nr nr nr nr nr nr nr nr nr nr nr nr

8451.37 9012.91 10734.24 11952.75 15084.98 15387.77 15490.26 20391.81 25320.88 28768.76 33883.17 43840.41

5388.98 5884.68

6204.47 6775.18

8.00 8.00

197.11 197.11

nr nr

6401.57 6972.29

5865.55 6361.26 7333.54 8768.05 9753.07 10014.47 11586.06 14157.02 17142.39 21952.78 25642.66 34291.16

6753.15 7323.88 8443.29 10094.88 11228.95 11529.91 13339.32 16299.33 19736.46 25274.78 29523.04 39480.27

8.00 8.00 8.00 8.00 10.00 10.00 12.00 12.00 12.00 14.00 14.00 14.00

197.11 197.11 197.11 197.11 246.38 246.38 295.66 295.66 295.66 344.94 344.94 344.94

nr nr nr nr nr nr nr nr nr nr nr nr

6950.26 7520.98 8640.40 10291.98 11475.34 11776.29 13634.98 16594.99 20032.12 25619.72 29867.97 39825.21

Commercial steel shell floor standing boilers; pressure jet burner; including controls, enamelled jacket, insulation, placing in position and commissioning; electrical work elsewhere Gas fired (on/off type), connected to conventional flue 130–190kW 200–250kW 280–360kW 375–500kW Gas fired (high/low type), connected to conventional flue 130–190kW 200–250kW 280–360kW 375–500kW 580–730kW 655–820kW 830–1040kW 1070–1400kW 1420–1850kW 1850–2350kW 2300–3000kW 2800–3500kW Oil fired (on/off type), connected to conventional flue 130–190kW 200–250kW Oil fired (high/low type), connected to conventional flue 130–190kW 200–250kW 280–360kW 375–500kW 580–730kW 655–820kW 830–1040kW 1070–1400kW 1420–1850kW 1850–2350kW 2300-3000kW 2800-3500kW

258

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T10: GAS/OIL FIRED BOILERS – cont'd ATMOSPHERIC Commercial cast iron sectional floor standing boilers; atmospheric; including controls, enamelled jacket, insulation, assembly and commissioning; electrical work elsewhere Gas (on/off type), connected to conventional flue 30–40kW 40–50kW 50–60kW 60–70kW 70–80kW 80–90kW 90–100kW 100–110kW 110–120kW

2103.30 2305.94 2450.94 2675.07 2835.29 3312.81 3446.33 3652.11 3862.59

2421.58 2654.89 2821.83 3079.88 3264.34 3814.12 3967.85 4204.77 4447.10

8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00

197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11

nr nr nr nr nr nr nr nr nr

2618.69 2851.99 3018.94 3276.98 3461.45 4011.23 4164.95 4401.87 4644.20

Gas (high/low type), connected to conventional flue 30–40kW 40–50kW 50–60kW 60–70kW 70–80kW 80–90kW 90–100kW 100–110kW 110–120kW 120–140kW 140–160kW 160–180kW 180–200kW 200–220kW 220–260kW 260–300kW 300–340kW

2387.62 2532.13 2722.20 2968.81 3143.18 3493.46 3683.53 3900.30 4143.77 6215.65 6372.73 6481.13 7087.45 7393.75 8034.64 8761.92 9344.69

2748.93 2915.30 3134.14 3418.07 3618.82 4022.11 4240.94 4490.51 4770.83 7156.23 7337.08 7461.89 8159.96 8512.61 9250.48 10087.82 10758.78

8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 10.00 10.00 10.00 12.00

197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 197.11 246.38 246.38 246.38 295.66

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

2946.03 3112.41 3331.24 3615.17 3815.93 4219.22 4438.05 4687.62 4967.93 7353.34 7534.19 7658.99 8357.07 8758.99 9496.87 10334.20 11054.44

1755.60 1814.51 2050.13 2467.08

2021.27 2089.09 2360.37 2840.41

11.00 11.00 11.00 11.00

271.02 271.02 271.02 271.02

nr nr nr nr

2292.29 2360.11 2631.39 3111.43

CONDENSING Low Nox wall mounted condensing boiler with high efficiency modulating pre-mix burner: Aluminium heat exchanger: Placing in position Maximum output 35kW 45kW 60kW 80kW

Material Costs/Prices for Measured Works – Mechanical Installations

259

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

2885.19 3083.85 3366.83 3871.56 4811.73 5324.55 7360.82 8058.44 10202.12 11115.72 11957.72 12157.53 12357.35 12993.75 20757.66 22197.95 22962.56 23729.48 25173.23

3321.79 3550.51 3876.32 4457.42 5539.86 6130.29 8474.70 9277.88 11745.96 12797.81 13767.22 13997.27 14227.33 14960.03 23898.81 25557.05 26437.37 27320.34 28982.57

8.00 8.00 8.00 8.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 12.00 12.00 12.00 12.00

197.11 197.11 197.11 197.11 246.38 246.38 246.38 246.38 246.38 246.38 246.38 246.38 246.38 246.38 246.38 295.66 295.66 295.66 295.66

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

3518.90 3747.62 4073.42 4654.53 5786.25 6376.67 8721.08 9524.27 11992.34 13044.19 14013.61 14243.65 14473.71 15206.41 24145.20 25852.72 26733.03 27616.00 29278.23

Straight length; 120mm long; including one locking band 127mm dia. 152mm dia. 175mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia.

41.92 46.98 54.53 62.04 73.37 91.92 131.63

48.26 54.09 62.78 71.43 84.47 105.83 151.55

0.49 0.51 0.54 0.58 0.70 0.74 0.80

12.07 12.57 13.30 14.29 17.25 18.23 19.71

nr nr nr nr nr nr nr

60.34 66.65 76.09 85.72 101.72 124.06 171.26

Straight length; 300mm long; including one locking band 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

64.67 73.11 84.00 95.07 105.43 126.48 138.79 148.52 169.88 182.21 201.08 221.88

74.46 84.17 96.71 109.46 121.38 145.62 159.79 170.99 195.59 209.78 231.51 255.46

0.52 0.52 0.55 0.64 0.79 0.86 0.94 1.03 1.03 1.10 1.10 1.10

12.81 12.81 13.55 15.77 19.46 21.19 23.16 25.38 25.38 27.10 27.10 27.10

nr nr nr nr nr nr nr nr nr nr nr nr

87.27 96.99 110.26 125.23 140.85 166.81 182.95 196.37 220.96 236.89 258.61 282.56

Low Nox floor standing condensing boiler with high efficiency modulating pre-mix burner: Stainless steel heat exchanger: Including controls: Placing in position. Maximum output 50kW 60kW 80kW 100kW 125kW 150kW 200kW 250kW 300kW 350kW 400kW 450kW 500kW 650kW 700kW 800kW 900kW 1000kW 1300kW FLUE SYSTEMS Flues; suitable for domestic, medium sized industrial and commercial oil and gas appliances; stainless steel, twin wall, insulated; for use internally or externally

260

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T10: GAS/OIL FIRED BOILERS – cont'd FLUE SYSTEMS – cont'd Flues; suitable for domestic, medium sized industrial and commercial oil and gas appliances – cont'd Straight length; 500mm long; including one locking band 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

76.01 84.74 95.43 111.55 129.56 155.22 174.31 190.34 219.82 236.86 261.09 270.46

87.51 97.56 109.87 128.43 149.17 178.71 200.69 219.14 253.08 272.70 300.60 311.39

0.55 0.55 0.63 0.63 0.86 0.95 1.03 1.12 1.12 1.19 1.19 1.19

13.55 13.55 15.52 15.52 21.19 23.41 25.38 27.59 27.59 29.32 29.32 29.32

nr nr nr nr nr nr nr nr nr nr nr nr

101.06 111.11 125.39 143.95 170.35 202.12 226.07 246.74 280.68 302.02 329.92 340.71

Straight length; 1000mm long; including one locking band 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

135.87 151.43 170.38 200.69 227.44 262.53 301.26 322.62 340.42 369.43 406.30 426.84

156.43 174.35 196.16 231.06 261.86 302.26 346.85 371.44 391.93 425.33 467.78 491.43

0.62 0.68 0.74 0.80 0.87 1.06 1.16 1.26 1.26 1.33 1.33 1.33

15.28 16.75 18.23 19.71 21.44 26.12 28.58 31.04 31.04 32.77 32.77 32.77

nr nr nr nr nr nr nr nr nr nr nr nr

171.71 191.10 214.40 250.77 283.29 328.37 375.43 402.48 422.98 458.10 500.55 524.20

Adjustable length; boiler removal; internal use only; including one locking band 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

62.28 70.38 79.76 91.47 135.62 162.44 182.16 318.76 341.21 372.14 405.98 425.00

71.70 81.03 91.83 105.31 156.14 187.02 209.73 367.00 392.84 428.45 467.41 489.31

0.52 0.55 0.59 0.64 0.79 0.86 0.99 0.91 0.91 0.99 0.99 0.99

12.81 13.55 14.54 15.77 19.46 21.19 24.39 22.42 22.42 24.39 24.39 24.39

nr nr nr nr nr nr nr nr nr nr nr nr

84.52 94.58 106.37 121.08 175.61 208.21 234.12 389.42 415.26 452.85 491.81 513.71

Material Costs/Prices for Measured Works – Mechanical Installations

261

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Inspection length; 500mm long; including one locking band 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

Material £

Labour hours

Labour £

Unit

Total rate £

160.08 165.76 174.59 184.88 239.04 259.07 292.52 469.31 482.08 528.98 553.15 562.55

184.30 190.84 201.01 212.86 275.21 298.27 336.79 540.33 555.03 609.03 636.86 647.68

0.55 0.55 0.63 0.63 0.86 0.95 1.03 1.12 1.12 1.19 1.19 1.19

13.55 13.55 15.52 15.52 21.19 23.41 25.38 27.59 27.59 29.32 29.32 29.32

nr nr nr nr nr nr nr nr nr nr nr nr

197.86 204.39 216.53 228.38 296.40 321.68 362.16 567.92 582.63 638.35 666.18 677.00

13.39 14.65 15.67 17.83 19.62 24.48 29.73 33.35 35.62 37.80 43.96 52.82

15.42 16.87 18.04 20.53 22.59 28.18 34.23 38.40 41.01 43.52 50.61 60.81

0.49 0.51 0.54 0.58 0.70 0.74 0.80 0.89 0.89 0.96 0.96 0.96

12.07 12.57 13.30 14.29 17.25 18.23 19.71 21.93 21.93 23.65 23.65 23.65

nr nr nr nr nr nr nr nr nr nr nr nr

27.49 29.43 31.35 34.82 39.84 46.42 53.94 60.32 62.94 67.17 74.27 84.47

90° insulated tee; including two locking bands 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

155.64 179.63 196.33 229.88 232.88 289.60 369.21 486.51 507.08 573.80 616.79 641.78

179.19 206.81 226.04 264.67 268.12 333.42 425.08 560.13 583.81 660.63 710.13 738.90

1.89 2.04 2.39 2.56 2.95 3.41 3.77 4.25 4.76 5.12 5.61 5.98

46.57 50.26 58.89 63.07 72.68 84.02 92.89 104.71 117.28 126.15 138.22 147.34

nr nr nr nr nr nr nr nr nr nr nr nr

225.76 257.07 284.93 327.74 340.80 417.44 517.97 664.84 701.09 786.78 848.35 886.23

135° insulated tee; including two locking bands 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

201.86 218.26 238.63 302.85 344.12 259.28 510.17 671.58 727.02 846.97 868.99 917.13

232.41 251.29 274.74 348.68 396.19 298.52 587.37 773.21 837.04 975.14 1000.49 1055.91

1.89 2.04 2.39 2.56 2.95 3.41 3.77 4.25 4.76 5.12 5.61 5.98

46.57 50.26 58.89 63.07 72.68 84.02 92.89 104.71 117.28 126.15 138.22 147.34

nr nr nr nr nr nr nr nr nr nr nr nr

278.97 301.55 333.63 411.75 468.88 382.53 680.26 877.92 954.32 1101.29 1138.71 1203.25

Adapters 127mm 152mm 178mm 203mm 254mm 304mm 355mm 400mm 450mm 500mm 550mm 600mm

dia. dia. dia. dia. dia. dia. dia. dia. dia. dia. dia. dia.

Fittings for flue system

262

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T10: GAS/OIL FIRED BOILERS – cont'd FLUE SYSTEMS – cont'd Fittings for flue system – cont'd Wall sleeve; for 135° tee through wall 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia.

20.66 27.72 29.03 32.66 36.42 42.45 47.16

23.79 31.91 33.42 37.60 41.93 48.87 54.30

1.89 2.04 2.39 2.56 2.95 3.41 3.77

46.57 50.26 58.89 63.07 72.68 84.02 92.89

nr nr nr nr nr nr nr

70.35 82.18 92.31 100.68 114.61 132.89 147.18

15° insulated elbow; including two locking bands 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia.

108.01 120.04 128.38 136.10 140.18 177.22 237.09

124.35 138.21 147.81 156.70 161.39 204.04 272.97

1.57 1.79 2.05 2.33 2.45 3.43 4.71

38.68 44.10 50.51 57.41 60.36 84.51 116.05

nr nr nr nr nr nr nr

163.04 182.31 198.32 214.10 221.76 288.55 389.01

30° insulated elbow; including two locking bands 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

108.01 120.04 128.38 136.10 140.18 177.22 236.64 237.09 274.77 288.07 309.16 337.11

124.35 138.21 147.81 156.70 161.39 204.04 272.45 272.97 316.35 331.66 355.94 388.12

1.44 1.62 1.89 2.17 2.16 2.74 3.17 3.53 3.88 4.24 4.61 4.96

35.48 39.91 46.57 53.47 53.22 67.51 78.10 86.97 95.60 104.47 113.58 122.21

nr nr nr nr nr nr nr nr nr nr nr nr

159.83 178.12 194.37 210.16 214.61 271.55 350.55 359.94 411.95 436.13 469.53 510.33

45° insulated elbow; including two locking bands 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

108.01 120.04 128.38 136.10 140.18 177.22 237.09 302.34 316.69 339.70 370.49 379.88

124.35 138.21 147.81 156.70 161.39 204.04 272.97 348.09 364.61 391.11 426.55 437.37

1.44 1.51 1.58 1.66 1.72 1.80 1.94 2.01 2.09 2.16 2.23 2.30

35.48 37.20 38.93 40.90 42.38 44.35 47.80 49.52 51.49 53.22 54.94 56.67

nr nr nr nr nr nr nr nr nr nr nr nr

159.83 175.41 186.74 197.59 203.77 248.39 320.77 397.61 416.11 444.32 481.50 494.03

Material Costs/Prices for Measured Works – Mechanical Installations

263

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Flue supports Wall support, galvanised; including plate and brackets 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia.; with 300mm support length and collar 450mm dia.; with 300mm support length and collar 500mm dia.; with 300mm support length and collar 550mm dia.; with 300mm support length and collar 600mm dia.; with 300mm support length and collar

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

65.57 72.09 79.59 82.88 98.84 111.75 149.58

75.49 83.00 91.63 95.42 113.80 128.66 172.22

2.24 2.44 2.52 2.77 2.98 3.46 4.08

55.19 60.12 62.09 68.25 73.42 85.25 100.52

nr nr nr nr nr nr nr

130.68 143.12 153.72 163.67 187.22 213.91 272.74

384.23

442.37

4.80

118.26

nr

560.64

409.65

471.64

5.62

138.47

nr

610.11

447.53

515.25

6.24

153.74

nr

669.00

489.63

563.72

6.97

171.73

nr

735.45

516.88

595.10

7.49

184.54

nr

779.64

20.30 22.56 27.02 40.68 46.41 53.04 63.21 80.74 87.68 106.45 130.23 186.89

23.37 25.97 31.11 46.84 53.43 61.07 72.78 92.96 100.95 122.56 149.94 215.17

1.86 2.14 1.93 2.74 3.21 3.68 4.28 4.86 5.46 6.04 6.65 7.24

45.83 52.73 47.55 67.51 79.09 90.67 105.45 119.74 134.53 148.82 163.85 178.38

nr nr nr nr nr nr nr nr nr nr nr nr

69.20 78.70 78.66 114.35 132.52 151.74 178.23 212.70 235.47 271.37 313.78 393.55

Ceiling/floor firestop spacer 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia.

3.95 4.40 4.97 5.89 6.08 7.31 13.31

4.55 5.07 5.72 6.78 7.00 8.42 15.32

0.66 0.69 0.70 0.87 0.91 0.95 0.99

16.26 17.00 17.25 21.44 22.42 23.41 24.39

nr nr nr nr nr nr nr

20.81 22.07 22.97 28.22 29.42 31.82 39.72

Wall band; internal or external use 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

23.91 24.96 25.95 27.39 28.51 30.80 32.78 40.65 43.31 52.06 54.53 57.65

27.53 28.74 29.88 31.53 32.82 35.46 37.74 46.80 49.86 59.94 62.78 66.37

1.03 1.07 1.11 1.18 1.30 1.45 1.65 1.85 2.39 2.25 2.45 2.66

25.38 26.36 27.35 29.07 32.03 35.73 40.65 45.58 58.89 55.44 60.36 65.54

nr nr nr nr nr nr nr nr nr nr nr nr

52.91 55.10 57.23 60.61 64.85 71.19 78.39 92.38 108.75 115.37 123.15 131.91

Ceiling/floor support 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

264

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T10: GAS/OIL FIRED BOILERS – cont'd FLUE SYSTEMS – cont'd Flashings and terminals Insulated top stub; including one locking band 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

58.89 66.59 71.69 76.29 81.00 110.73 146.18 140.94 153.12 177.14 185.35 191.82

67.80 76.67 82.54 87.83 93.26 127.49 168.30 162.27 176.29 203.95 213.40 220.85

1.49 1.90 1.92 2.20 2.49 2.79 3.19 3.59 3.97 4.38 4.78 5.17

36.71 46.81 47.31 54.20 61.35 68.74 78.60 88.45 97.81 107.92 117.77 127.38

nr nr nr nr nr nr nr nr nr nr nr nr

104.51 123.48 129.84 142.04 154.61 196.23 246.90 250.72 274.11 311.86 331.17 348.23

Rain cap; including one locking band 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

31.48 32.90 36.23 43.32 56.96 39.00 102.89 102.65 111.64 120.71 129.52 138.47

36.24 37.88 41.71 49.88 65.58 44.90 118.46 118.18 128.53 138.98 149.12 159.42

1.49 1.54 1.72 2.00 2.49 2.80 3.19 3.45 3.97 4.38 4.78 5.17

36.71 37.94 42.38 49.28 61.35 68.99 78.60 85.00 97.81 107.92 117.77 127.38

nr nr nr nr nr nr nr nr nr nr nr nr

72.95 75.82 84.09 99.15 126.93 113.89 197.06 203.19 226.35 246.89 266.89 286.80

Round top; including one locking band 127mm dia 152mm dia 178mm dia 203mm dia 254mm dia 304mm dia 355mm dia

60.19 65.63 74.82 88.05 104.10 136.73 182.41

69.30 75.56 86.14 101.37 119.85 157.42 210.01

1.49 1.65 1.92 2.20 2.49 2.80 3.19

36.71 40.65 47.31 54.20 61.35 68.99 78.60

nr nr nr nr nr nr nr

106.01 116.21 133.45 155.58 181.20 226.41 288.61

Coping cap; including one locking band 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia.

33.71 35.31 38.85 46.62 56.96 76.80 102.89

38.81 40.65 44.73 53.67 65.58 88.42 118.46

1.49 1.65 1.92 2.20 2.49 2.79 3.19

36.71 40.65 47.31 54.20 61.35 68.74 78.60

nr nr nr nr nr nr nr

75.52 81.31 92.03 107.88 126.93 157.16 197.06

Material Costs/Prices for Measured Works – Mechanical Installations

265

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Storm collar 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

6.39 6.84 7.58 7.94 9.94 10.36 11.07 29.36 32.32 35.24 38.19 41.12

7.36 7.88 8.73 9.14 11.44 11.93 12.75 33.80 37.21 40.57 43.97 47.34

0.52 0.55 0.57 0.66 0.66 0.72 0.77 0.82 0.87 0.92 0.98 1.03

12.81 13.55 14.04 16.26 16.26 17.74 18.97 20.20 21.44 22.67 24.15 25.38

nr nr nr nr nr nr nr nr nr nr nr nr

20.17 21.43 22.77 25.40 27.71 29.67 31.72 54.01 58.65 63.24 68.11 72.72

Flat flashing; including storm collar and sealant 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

35.89 37.09 38.91 42.61 58.23 69.57 109.64 152.95 175.71 190.35 202.11 209.41

41.32 42.70 44.80 49.06 67.04 80.10 126.23 176.10 202.30 219.15 232.69 241.10

1.49 1.65 1.92 2.20 2.49 2.80 3.20 3.59 3.97 4.38 4.78 5.17

36.71 40.65 47.31 54.20 61.35 68.99 78.84 88.45 97.81 107.92 117.77 127.38

nr nr nr nr nr nr nr nr nr nr nr nr

78.03 83.36 92.10 103.26 128.39 149.09 205.07 264.55 300.11 327.07 350.47 368.48

5°–30° rigid adjustable flashing; including storm collar and sealant 127mm dia. 152mm dia. 178mm dia. 203mm dia. 254mm dia. 304mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 550mm dia. 600mm dia.

61.12 64.41 68.49 72.02 75.81 93.82 106.70 344.00 401.46 428.59 448.49 487.96

70.37 74.16 78.85 82.92 87.28 108.02 122.85 396.06 462.21 493.45 516.36 561.80

1.49 1.65 1.92 2.20 2.49 2.80 3.19 3.59 3.97 4.38 4.77 5.17

36.71 40.65 47.31 54.20 61.35 68.99 78.60 88.45 97.81 107.92 117.53 127.38

nr nr nr nr nr nr nr nr nr nr nr nr

107.08 114.81 126.16 137.12 148.63 177.00 201.44 484.51 560.03 601.36 633.88 689.18

152mm long 100mm dia. 125mm dia. 150mm dia.

6.54 8.04 8.70

7.53 9.26 10.02

0.52 0.52 0.52

12.81 12.81 12.81

nr nr nr

20.34 22.07 22.83

305mm long 100mm dia. 125mm dia. 150mm dia.

9.92 11.64 13.81

11.42 13.40 15.90

0.52 0.52 0.52

12.81 12.81 12.81

nr nr nr

24.23 26.21 28.71

Domestic and small commercial; twin walled gas vent system suitable for gas fired appliances; domestic gas boilers; small commercial boilers with internal or external flues

266

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T10: GAS/OIL FIRED BOILERS – cont'd FLUE SYSTEMS – cont'd Domestic and small commercial; twin walled gas vent system suitable for gas fired appliances – cont'd 457mm long 100mm dia. 125mm dia. 150mm dia.

10.98 12.34 15.27

12.64 14.21 17.58

0.55 0.55 0.55

13.55 13.55 13.55

nr nr nr

26.19 27.76 31.13

914mm long 100mm dia. 125mm dia. 150mm dia.

19.61 22.86 26.21

22.58 26.32 30.18

0.62 0.62 0.62

15.28 15.28 15.28

nr nr nr

37.85 41.60 45.45

1524mm long 100mm dia. 125mm dia. 150mm dia.

28.33 34.86 37.43

32.62 40.14 43.09

0.82 0.84 0.84

20.20 20.70 20.70

nr nr nr

52.82 60.83 63.79

Adjustable length 305mm long 100mm dia. 125mm dia. 150mm dia.

12.56 14.10 17.78

14.46 16.23 20.47

0.56 0.56 0.56

13.80 13.80 13.80

nr nr nr

28.26 30.03 34.27

Adjustable length 457mm long 100mm dia. 125mm dia. 150mm dia.

16.93 20.53 22.84

19.49 23.64 26.30

0.56 0.56 0.56

13.80 13.80 13.80

nr nr nr

33.29 37.43 40.09

Adjustable elbow 0°-90° 100mm dia. 125mm dia. 150mm dia.

14.32 16.93 21.21

16.49 19.49 24.42

0.48 0.48 0.48

11.83 11.83 11.83

nr nr nr

28.31 31.32 36.25

Draughthood connector 100mm dia. 125mm dia. 150mm dia.

4.42 4.98 5.41

5.09 5.73 6.23

0.48 0.48 0.48

11.83 11.83 11.83

nr nr nr

16.92 17.56 18.06

Adaptor 100mm dia. 125mm dia. 150mm dia.

10.72 10.95 11.18

12.34 12.61 12.87

0.48 0.48 0.48

11.83 11.83 11.83

nr nr nr

24.17 24.43 24.70

Support plate 100mm dia. 125mm dia. 150mm dia.

7.74 8.23 8.81

8.91 9.48 10.14

0.48 0.48 0.48

11.83 11.83 11.83

nr nr nr

20.74 21.30 21.97

Wall band 100mm dia. 125mm dia. 150mm dia.

6.99 7.46 9.45

8.05 8.59 10.88

0.48 0.48 0.48

11.83 11.83 11.83

nr nr nr

19.87 20.42 22.71

Material Costs/Prices for Measured Works – Mechanical Installations

267

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Firestop 100mm dia. 125mm dia. 150mm dia.

3.03 3.03 3.48

3.49 3.49 4.01

0.48 0.48 0.48

11.83 11.83 11.83

nr nr nr

15.31 15.31 15.83

Flat flashing 125mm dia. 150mm dia.

20.62 28.68

23.74 33.02

0.55 0.55

13.55 13.55

nr nr

37.29 46.57

Adjustable flashing 5°-30° 100mm dia. 125mm dia.

53.73 83.88

61.86 96.57

0.55 0.55

13.55 13.55

nr nr

75.41 110.12

4.28 4.38 4.49

4.93 5.04 5.17

0.55 0.55 0.55

13.55 13.55 13.55

nr nr nr

18.48 18.59 18.72

16.35 17.97 23.05

18.82 20.69 26.54

0.55 0.55 0.55

13.55 13.55 13.55

nr nr nr

32.38 34.24 40.09

103.90 103.90 76.55

119.62 119.62 88.13

2.15 2.15 2.40

52.97 52.97 59.13

nr nr nr

172.60 172.60 147.27

Gas fired 293 kW rating 1465 kW rating 2930 kW rating

18063.47 38528.92 55328.93

20796.92 44359.30 63701.58

86.45 148.22 207.50

2129.99 3651.90 5112.47

nr nr nr

22926.91 48011.21 68814.05

Oil fired 293 kW rating 1465 kW rating 2930 kW rating

16383.47 35640.99 53940.50

18862.70 41034.37 62103.05

86.45 148.22 207.50

2129.99 3651.90 5112.47

nr nr nr

20992.69 44686.27 67215.52

Storm collar 100mm dia. 125mm dia. 150mm dia. Gas vent terminal 100mm dia. 125mm dia. 150mm dia. Twin wall galvanised steel flue box, 125mm dia.; fitted for gas fire, where no chimney exists Free standing Recess Back boiler T13: PACKAGED STEAM GENERATORS Packaged steam boilers; boiler mountings centrifugal water feed pump; insulation; and sheet steel wrap around casing; plastic coated

268

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING Y 10 – PIPELINES SCREWED STEEL Black steel pipes; screwed and socketed joints; BS 1387: 1985. Fixed vertically, brackets measured separately. Screwed joints are within the running length, but any flanges are additional Medium weight 10mm dia 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

3.77 2.38 2.80 4.02 4.98 5.79 8.14 11.05 14.36 20.34 25.88 30.06

4.34 2.74 3.22 4.63 5.73 6.67 9.37 12.72 16.53 23.42 29.80 34.61

0.37 0.37 0.37 0.41 0.48 0.52 0.62 0.65 1.10 1.31 1.66 1.88

9.12 9.12 9.12 10.10 11.83 12.81 15.28 16.02 27.10 32.28 40.90 46.32

m m m m m m m m m m m m

13.46 11.86 12.34 14.73 17.56 19.48 24.65 28.74 43.64 55.69 70.70 80.93

Heavy weight 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

2.83 3.36 4.91 6.10 7.11 9.87 13.43 17.09 23.85 27.60 32.27 50.86 63.76 75.92

3.26 3.87 5.65 7.02 8.19 11.36 15.46 19.68 27.46 31.78 37.15 58.56 73.41 87.41

0.37 0.37 0.41 0.48 0.52 0.62 0.64 1.10 1.31 1.66 1.88 2.99 3.49 3.91

9.12 9.12 10.10 11.83 12.81 15.28 15.77 27.10 32.28 40.90 46.32 73.67 85.99 96.34

m m m m m m m m m m m m m m

12.37 12.98 15.75 18.85 21.00 26.64 31.23 46.78 59.74 72.68 83.47 132.23 159.40 183.74

Material Costs/Prices for Measured Works – Mechanical Installations

269

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Black steel pipes; screwed and socketed joints; BS 1387: 1985. Fixed at high level or suspended, brackets measured separately. Screwed joints are within the running length, but any flanges are additional Medium weight 10mm dia 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

3.77 2.38 2.80 4.02 4.98 5.79 8.14 11.05 14.36 20.34 25.88 30.06

4.34 2.74 3.22 4.63 5.73 6.67 9.37 12.72 16.53 23.42 29.80 34.61

0.58 0.58 0.58 0.60 0.68 0.73 0.85 0.88 1.45 1.74 2.21 2.50

14.29 14.29 14.29 14.78 16.75 17.99 20.94 21.68 35.73 42.87 54.45 61.60

m m m m m m m m m m m m

18.63 17.03 17.51 19.41 22.49 24.65 30.31 34.40 52.26 66.29 84.25 96.20

Heavy weight 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

2.83 3.36 4.91 6.10 7.11 9.87 13.43 17.09 23.85 27.60 32.27 50.86 63.76 75.92

3.26 3.87 5.65 7.02 8.19 11.36 15.46 19.68 27.46 31.78 37.15 58.56 73.41 87.41

0.58 0.58 0.60 0.68 0.73 0.85 0.88 1.45 1.74 2.21 2.50 2.99 3.49 3.91

14.29 14.29 14.78 16.75 17.99 20.94 21.68 35.73 42.87 54.45 61.60 73.67 85.99 96.34

m m m m m m m m m m m m m m

17.55 18.16 20.44 23.78 26.17 32.31 37.14 55.40 70.33 86.23 98.75 132.23 159.40 183.74

0.59 0.66 0.77 1.40 1.33 1.86 2.45 3.36 4.90

0.68 0.76 0.89 1.61 1.53 2.14 2.82 3.87 5.64

0.14 0.14 0.17 0.19 0.22 0.22 0.28 0.32 0.35

3.45 3.45 4.19 4.68 5.42 5.42 6.90 7.88 8.62

nr nr nr nr nr nr nr nr nr

4.13 4.21 5.08 6.29 6.95 7.56 9.72 11.75 14.26

Fixings For steel pipes; black malleable iron. For minimum fixing distances, refer to the Tables and Memoranda to the rear of the book Single pipe bracket, screw on, black malleable iron; screwed to wood 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

270

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd SCREWED STEEL – cont'd Fixings – cont'd Single pipe bracket, screw on, black malleable iron; plugged and screwed 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

0.59 0.66 0.77 1.40 1.33 1.86 2.45 3.36 4.90

0.68 0.76 0.89 1.61 1.53 2.14 2.82 3.87 5.64

0.25 0.25 0.30 0.32 0.32 0.32 0.35 0.42 0.42

6.16 6.16 7.39 7.88 7.88 7.88 8.62 10.35 10.35

nr nr nr nr nr nr nr nr nr

6.84 6.92 8.28 9.50 9.42 10.03 11.44 14.22 15.99

Single pipe bracket for building in, black malleable iron 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

1.73 1.73 1.73 1.96 1.98 2.06

1.99 1.99 1.99 2.26 2.28 2.37

0.10 0.11 0.12 0.14 0.15 0.16

2.46 2.71 2.96 3.45 3.70 3.94

nr nr nr nr nr nr

4.46 4.70 4.95 5.71 5.98 6.31

Pipe ring, single socket, black malleable iron 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia

0.68 0.76 0.83 0.88 1.14 1.44 2.08 2.49 3.77 7.63 8.55 23.64 29.55 35.47 41.39 48.98

0.78 0.88 0.96 1.01 1.31 1.66 2.39 2.87 4.34 8.78 9.84 27.22 34.02 40.84 47.65 56.39

0.10 0.11 0.12 0.14 0.15 0.16 0.30 0.35 0.40 0.60 0.77 0.90 1.10 1.25 1.50 1.75

2.46 2.71 2.96 3.45 3.70 3.94 7.39 8.62 9.86 14.79 18.97 22.17 27.10 30.80 36.96 43.12

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

3.25 3.59 3.91 4.46 5.01 5.60 9.79 11.49 14.20 23.57 28.82 49.39 61.12 71.64 84.61 99.51

Pipe ring, double socket, black malleable iron 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

0.79 0.91 1.02 1.21 1.30 2.04

0.91 1.05 1.17 1.39 1.50 2.35

0.10 0.11 0.12 0.14 0.15 0.16

2.46 2.71 2.96 3.45 3.70 3.94

nr nr nr nr nr nr

3.37 3.76 4.13 4.84 5.19 6.29

Screw on backplate (Male), black malleable iron; plugged and screwed M12

0.43

0.50

0.10

2.46

nr

2.96

Material Costs/Prices for Measured Works – Mechanical Installations

271

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Screw on backplate (Female), black malleable iron; plugged and screwed M12

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

0.43

0.50

0.10

2.46

nr

2.96

Galvanised steel; including inserts, bolts, nuts, washers; fixed to backgrounds 41 x 21mm 41 x 41mm

5.08 6.09

5.85 7.01

0.29 0.29

7.15 7.15

m m

12.99 14.16

Threaded rods; metric thread; including nuts, washers etc. 12mm dia x 600mm long

2.57

2.96

0.18

4.43

nr

7.39

Roller and chair; black malleable Up to 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 175mm dia 200mm dia 250mm dia 300mm dia

13.11 13.50 14.66 14.91 20.89 20.89 35.26 54.00 70.45 88.71

15.09 15.54 16.88 17.17 24.05 24.05 40.60 62.17 81.11 102.13

0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30 0.30

4.93 4.93 4.93 4.93 4.93 7.39 7.39 7.39 7.39 7.39

nr nr nr nr nr nr nr nr nr nr

20.02 20.47 21.81 22.09 28.98 31.44 47.99 69.56 88.50 109.53

Roller bracket; black malleable 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 175mm dia 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia

2.75 2.89 3.09 3.26 4.29 6.18 6.87 11.34 11.34 25.27 25.27 33.59 41.27 66.35 75.84

3.17 3.33 3.56 3.75 4.94 7.12 7.91 13.06 13.06 29.09 29.09 38.67 47.52 76.39 87.32

0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.30 0.30 0.30 0.30 0.30

4.93 4.93 4.93 4.93 4.93 4.93 4.93 4.93 7.39 7.39 7.39 7.39 7.39 7.39 7.39

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

8.09 8.25 8.49 8.68 9.87 12.04 12.84 17.98 20.45 36.49 36.49 46.06 54.91 83.78 94.71

Extra over channel sections for fabricated hangers and brackets

Pipe roller and chair

272

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd SCREWED STEEL – cont'd Extra over black steel screwed pipes; black steel flanges, screwed and drilled; metric; BS 4504 Screwed flanges; PN6 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

7.01 7.01 7.01 7.01 7.01 7.47 10.39 14.67 17.35 31.82 31.82

8.07 8.07 8.07 8.07 8.07 8.60 11.96 16.89 19.98 36.64 36.64

0.35 0.47 0.53 0.62 0.70 0.84 1.03 1.23 1.41 1.77 2.21

8.62 11.58 13.06 15.28 17.25 20.70 25.38 30.31 34.74 43.61 54.45

nr nr nr nr nr nr nr nr nr nr nr

16.69 19.65 21.13 23.35 25.32 29.30 37.34 47.20 54.72 80.25 91.09

Screwed flanges; PN16 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

8.91 8.91 8.91 9.52 9.52 11.61 14.50 17.66 19.80 34.65 34.10

10.26 10.26 10.26 10.96 10.96 13.37 16.69 20.33 22.80 39.89 39.26

0.35 0.47 0.53 0.62 0.70 0.84 1.03 1.23 1.41 1.77 2.21

8.62 11.58 13.06 15.28 17.25 20.70 25.38 30.31 34.74 43.61 54.45

nr nr nr nr nr nr nr nr nr nr nr

18.88 21.84 23.32 26.24 28.21 34.06 42.07 50.64 57.54 83.50 93.71

13.31 13.31 13.29 13.31 13.31 13.31 15.83 17.94 24.27 51.43 51.43

15.32 15.32 15.30 15.32 15.32 15.32 18.23 20.65 27.94 59.21 59.21

0.35 0.47 0.53 0.62 0.70 0.84 1.03 1.23 1.41 1.77 2.21

8.62 11.58 13.06 15.28 17.25 20.70 25.38 30.31 34.74 43.61 54.45

nr nr nr nr nr nr nr nr nr nr nr

23.95 26.90 28.36 30.60 32.57 36.02 43.60 50.96 62.68 102.82 113.66

Extra over black steel screwed pipes; black steel flanges, screwed and drilled; imperial; BS 10 Screwed flanges; Table E 1/2" dia 3/4" dia 1" dia 1 1/4" dia 1 1/2" dia 2" dia 2 1/2" dia 3" dia 4" dia 5" dia 6" dia

Material Costs/Prices for Measured Works – Mechanical Installations

273

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Extra over black steel screwed pipes; black steel flange connections Bolted connection between pair of flanges; including gasket, bolts, nuts and washers 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

6.45 7.63 11.46 12.44 14.63 20.91

7.43 8.78 13.19 14.32 16.84 24.07

0.53 0.53 0.53 0.61 0.61 0.90

13.06 13.06 13.06 15.03 15.03 22.17

nr nr nr nr nr nr

20.48 21.84 26.25 29.35 31.87 46.25

Long screw connection with socket and backnut 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

4.73 5.95 7.80 10.46 12.58 18.53 25.92 59.26 96.01

5.45 6.85 8.98 12.04 14.48 21.33 29.84 68.23 110.54

0.63 0.84 0.95 1.11 1.28 1.53 1.87 2.21 3.05

15.52 20.70 23.41 27.35 31.54 37.70 46.07 54.45 75.15

nr nr nr nr nr nr nr nr nr

20.97 27.55 32.39 39.39 46.02 59.03 75.92 122.68 185.69

Running nipple 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

1.16 1.47 1.81 2.53 3.41 5.19 11.18 17.43 27.31

1.34 1.69 2.08 2.91 3.93 5.98 12.87 20.07 31.44

0.50 0.68 0.77 0.90 1.03 1.23 1.50 1.78 2.38

12.32 16.75 18.97 22.17 25.38 30.31 36.96 43.86 58.64

nr nr nr nr nr nr nr nr nr

13.65 18.45 21.06 25.09 29.30 36.28 49.83 63.92 90.08

Barrel nipple 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

0.66 1.05 1.39 2.08 2.56 3.65 7.81 10.89 19.73 36.62 57.71

0.76 1.21 1.60 2.39 2.95 4.20 8.99 12.54 22.72 42.16 66.44

0.50 0.68 0.77 0.90 1.03 1.23 1.50 1.78 2.38 2.87 3.39

12.32 16.75 18.97 22.17 25.38 30.31 36.96 43.86 58.64 70.71 83.52

nr nr nr nr nr nr nr nr nr nr nr

13.08 17.96 20.57 24.57 28.33 34.51 45.95 56.39 81.36 112.87 149.97

Close taper nipple 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

1.39 1.81 2.35 3.53 4.37 6.73 13.06 16.10 33.06

1.60 2.08 2.71 4.06 5.03 7.75 15.04 18.54 38.06

0.50 0.68 0.77 0.90 1.03 1.23 1.50 1.78 2.38

12.32 16.75 18.97 22.17 25.38 30.31 36.96 43.86 58.64

nr nr nr nr nr nr nr nr nr

13.92 18.84 21.68 26.24 30.41 38.05 51.99 62.39 96.70

Extra over black steel screwed pipes; black heavy steel tubular fittings; BS 1387

274

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd SCREWED STEEL – cont'd Extra over black steel screwed pipes; black malleable iron fittings; BS 143 Cap 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

0.56 0.64 0.81 1.41 1.67 3.48 5.81 6.57 14.39

0.64 0.74 0.93 1.62 1.92 4.01 6.69 7.56 16.57

0.32 0.43 0.49 0.58 0.66 0.78 0.96 1.13 1.70

7.88 10.59 12.07 14.29 16.26 19.22 23.65 27.84 41.89

nr nr nr nr nr nr nr nr nr

8.53 11.33 13.01 15.91 18.18 23.22 30.34 35.41 58.45

Plain plug, hollow 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

0.39 0.50 0.68 0.95 1.79 2.50 4.09 6.38 11.75

0.45 0.58 0.78 1.09 2.06 2.88 4.71 7.35 13.53

0.28 0.38 0.44 0.51 0.59 0.70 0.85 1.00 1.44

6.90 9.36 10.84 12.57 14.54 17.25 20.94 24.64 35.48

nr nr nr nr nr nr nr nr nr

7.35 9.94 11.62 13.66 16.60 20.13 25.65 31.98 49.01

1.22 1.18 1.75 2.52 3.55 4.66

1.40 1.36 2.01 2.90 4.09 5.37

0.28 0.38 0.44 0.51 0.59 0.70

6.90 9.36 10.84 12.57 14.54 17.25

nr nr nr nr nr nr

8.30 10.72 12.86 15.47 18.62 22.61

90° Elbow, male/female 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

0.64 0.87 1.44 2.63 4.42 5.68 12.28 16.78 29.34

0.74 1.00 1.66 3.03 5.09 6.54 14.14 19.32 33.78

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

16.51 21.94 25.56 30.62 36.87 44.73 60.70 74.51 109.91

90° Elbow 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

0.58 0.79 1.22 2.23 3.75 4.39 9.48 13.93 26.86

0.67 0.91 1.40 2.57 4.32 5.05 10.91 16.04 30.92

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

16.44 21.85 25.30 30.16 36.10 43.24 57.48 71.23 107.06

Plain plug, solid 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

Material Costs/Prices for Measured Works – Mechanical Installations

275

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

125mm dia 150mm dia

65.33 121.62

75.22 140.02

4.44 5.79

109.39 142.66

nr nr

184.61 282.68

45° Elbow 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 150mm dia

1.38 1.69 2.52 5.15 6.32 8.66 12.67 19.04 41.76 116.62

1.59 1.95 2.90 5.93 7.28 9.97 14.59 21.92 48.08 134.27

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09 5.79

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13 142.66

nr nr nr nr nr nr nr nr nr nr

17.36 22.89 26.80 33.52 39.06 48.16 61.15 77.11 124.21 276.92

90° Bend, male/female 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

1.13 1.65 2.44 3.88 6.12 10.69 17.79 27.38 67.84

1.30 1.90 2.81 4.47 7.05 12.31 20.48 31.52 78.11

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

17.07 22.84 26.71 32.06 38.83 50.50 67.05 86.71 154.24

90° Bend, male 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

2.61 2.92 4.29 9.31 13.07 19.84

3.00 3.36 4.94 10.72 15.05 22.84

0.64 0.85 0.97 1.12 1.29 1.55

15.77 20.94 23.90 27.59 31.78 38.19

nr nr nr nr nr nr

18.77 24.30 28.84 38.31 46.83 61.03

1.04 1.48 2.09 3.95 5.27 7.42 15.85 25.25 55.35 130.56 237.45

1.20 1.70 2.41 4.55 6.07 8.54 18.25 29.07 63.73 150.32 273.38

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09 4.44 5.79

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13 109.39 142.66

nr nr nr nr nr nr nr nr nr nr nr

16.97 22.65 26.31 32.14 37.85 46.73 64.82 84.26 139.86 259.71 416.04

5.96 9.64 12.02 18.63 22.19 33.86

6.86 11.10 13.84 21.45 25.55 38.98

0.64 0.85 0.97 1.12 1.29 1.55

15.77 20.94 23.90 27.59 31.78 38.19

nr nr nr nr nr nr

22.63 32.04 37.74 49.04 57.33 77.17

90° Bend, female 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia Return bend 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

276

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd SCREWED STEEL – cont'd Extra over black steel screwed pipes; black malleable iron fittings; BS 143 – cont'd Equal socket, parallel thread 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

0.56 0.68 0.94 1.88 2.74 3.96 6.09 8.63 14.24

0.64 0.78 1.08 2.16 3.15 4.56 7.01 9.94 16.39

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

16.41 21.73 24.98 29.76 34.94 42.75 53.58 65.13 92.53

Concentric reducing socket 20 x 15mm dia 25 x 15mm dia 25 x 20mm dia 32 x 25mm dia 40 x 25mm dia 40 x 32mm dia 50 x 25mm dia 50 x 40mm dia 65 x 50mm dia 80 x 50mm dia 100 x 50mm dia 100 x 80mm dia 150 x 100mm dia

0.88 1.04 1.10 2.08 2.61 2.71 5.05 3.79 6.89 8.97 17.89 16.59 49.70

1.01 1.20 1.27 2.39 3.00 3.12 5.81 4.36 7.93 10.33 20.60 19.10 57.22

0.76 0.85 0.86 1.01 1.16 1.16 1.38 1.38 1.69 2.00 2.75 2.75 4.10

18.73 20.94 21.19 24.88 28.58 28.58 34.00 34.00 41.64 49.28 67.76 67.76 101.02

nr nr nr nr nr nr nr nr nr nr nr nr nr

19.74 22.14 22.46 27.28 31.59 31.70 39.82 38.36 49.57 59.60 88.35 86.86 158.24

Eccentric reducing socket 20 x 15mm dia 25 x 15mm dia 25 x 20mm dia 32 x 25mm dia 40 x 25mm dia 40 x 32mm dia 50 x 25mm dia 50 x 40mm dia 65 x 50mm dia 80 x 50mm dia

1.58 4.52 5.12 7.00 8.00 4.02 5.19 4.82 8.33 14.58

1.82 5.20 5.89 8.06 9.21 4.63 5.98 5.55 9.59 16.79

0.73 0.85 0.85 1.01 1.16 1.16 1.38 1.38 1.69 2.00

17.99 20.94 20.94 24.88 28.58 28.58 34.00 34.00 41.64 49.28

nr nr nr nr nr nr nr nr nr nr

19.81 26.15 26.84 32.94 37.79 33.21 39.98 39.55 51.23 66.06

Hexagon bush 20 x 15mm dia 25 x 15mm dia 25 x 20mm dia 32 x 25mm dia 40 x 25mm dia 40 x 32mm dia 50 x 25mm dia 50 x 40mm dia 65 x 50mm dia 80 x 50mm dia 100 x 50mm dia 100 x 80mm dia 150 x 100mm dia

0.50 0.61 0.64 0.83 1.31 1.20 2.71 2.50 4.19 6.80 15.72 13.09 47.03

0.58 0.70 0.74 0.96 1.51 1.38 3.12 2.88 4.82 7.83 18.10 15.07 54.15

0.37 0.43 0.43 0.51 0.58 0.58 0.71 0.71 0.85 1.00 1.52 1.52 2.57

9.12 10.59 10.59 12.57 14.29 14.29 17.49 17.49 20.94 24.64 37.45 37.45 63.32

nr nr nr nr nr nr nr nr nr nr nr nr nr

9.69 11.30 11.33 13.52 15.80 15.67 20.61 20.37 25.77 32.47 55.55 52.52 117.47

Material Costs/Prices for Measured Works – Mechanical Installations

277

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Hexagon nipple 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 150mm dia

0.54 0.61 0.87 1.79 2.08 3.76 6.14 8.87 15.06 33.60

0.62 0.70 1.00 2.06 2.39 4.33 7.07 10.21 17.34 38.68

0.28 0.38 0.44 0.51 0.59 0.70 0.85 1.00 1.44 2.32

6.90 9.36 10.84 12.57 14.54 17.25 20.94 24.64 35.48 57.16

nr nr nr nr nr nr nr nr nr nr

7.52 10.06 11.84 14.63 16.93 21.58 28.01 34.85 52.82 95.85

Union, male/female 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia

2.83 3.46 4.33 6.67 8.54 13.45 25.67 35.29

3.26 3.98 4.99 7.68 9.83 15.49 29.55 40.63

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19

nr nr nr nr nr nr nr nr

19.03 24.93 28.88 35.27 41.62 53.67 76.12 95.82

Union, female 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

2.31 2.52 2.94 5.54 6.26 10.37 22.36 30.88 58.79

2.66 2.90 3.38 6.38 7.21 11.94 25.74 35.55 67.69

0.64 0.85 0.97 1.12 1.29 1.55 1.89 2.24 3.09

15.77 20.94 23.90 27.59 31.78 38.19 46.57 55.19 76.13

nr nr nr nr nr nr nr nr nr

18.43 23.84 27.28 33.97 38.99 50.13 72.31 90.74 143.82

4.10 5.13 7.20

4.72 5.91 8.29

0.55 0.85 0.97

13.55 20.94 23.90

nr nr nr

18.27 26.85 32.19

Twin elbow 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia

3.32 3.67 5.94 12.20 15.45 19.86 35.28 60.10

3.82 4.23 6.84 14.05 17.79 22.87 40.62 69.19

0.91 1.22 1.39 1.62 1.86 2.21 2.72 3.21

22.42 30.06 34.25 39.91 45.83 54.45 67.02 79.09

nr nr nr nr nr nr nr nr

26.24 34.28 41.09 53.96 63.62 77.32 107.64 148.28

Equal tee 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

0.79 1.15 1.66 3.03 4.66 6.70 14.69 17.89 32.42 94.19 150.08

0.91 1.32 1.91 3.49 5.37 7.71 16.91 20.60 37.33 108.44 172.79

0.91 1.22 1.39 1.62 1.86 2.21 2.72 3.21 4.44 5.38 6.31

22.42 30.06 34.25 39.91 45.83 54.45 67.02 79.09 109.39 132.55 155.47

nr nr nr nr nr nr nr nr nr nr nr

23.33 31.38 36.16 43.40 51.19 62.16 83.93 99.69 146.72 241.00 328.26

Union elbow, male/female 15mm dia 20mm dia 25mm dia

278

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd SCREWED STEEL – cont'd Extra over black steel screwed pipes; black malleable iron fittings; BS 143 – cont'd Tee reducing on branch 20 x 15mm dia 25 x 15mm dia 25 x 20mm dia 32 x 25mm dia 40 x 25mm dia 40 x 32mm dia 50 x 25mm dia 50 x 40mm dia 65 x 50mm dia 80 x 50mm dia 100 x 50mm dia 100 x 80mm dia 150 x 100mm dia

1.04 1.44 1.71 2.98 3.94 5.16 5.86 8.73 13.62 18.42 30.49 47.03 110.55

1.20 1.66 1.97 3.43 4.54 5.94 6.75 10.05 15.68 21.21 35.10 54.15 127.28

1.22 1.39 1.39 1.62 1.86 1.86 2.21 2.21 2.72 3.21 4.44 4.44 6.31

30.06 34.25 34.25 39.91 45.83 45.83 54.45 54.45 67.02 79.09 109.39 109.39 155.47

nr nr nr nr nr nr nr nr nr nr nr nr nr

31.26 35.91 36.22 43.35 50.36 51.77 61.20 64.50 82.70 100.30 144.50 163.54 282.75

Equal pitcher tee 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

2.42 3.01 4.52 6.86 10.60 14.89 23.02 35.93 80.84

2.79 3.47 5.20 7.90 12.20 17.14 26.50 41.37 93.07

0.91 1.22 1.39 1.62 1.86 2.21 2.72 3.21 4.44

22.42 30.06 34.25 39.91 45.83 54.45 67.02 79.09 109.39

nr nr nr nr nr nr nr nr nr

25.21 33.52 39.45 47.81 58.03 71.59 93.52 120.46 202.47

Cross 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

2.37 3.56 4.52 6.59 8.48 13.77 19.04 25.32 52.26

2.73 4.10 5.20 7.59 9.76 15.85 21.92 29.15 60.17

1.00 1.33 1.51 1.77 2.02 2.42 2.97 3.50 4.84

24.64 32.77 37.20 43.61 49.77 59.62 73.18 86.23 119.25

nr nr nr nr nr nr nr nr nr

27.37 36.87 42.41 51.20 59.53 75.48 95.10 115.39 179.42

Material Costs/Prices for Measured Works – Mechanical Installations

279

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

BLACK WELDED STEEL Black steel pipes; butt welded joints; BS 1387: 1985; including protective painting. Fixed Vertical with brackets measured separately (Refer to Screwed Steel Section). Welded butt joints are within the running length, but any flanges are additional Medium weight 10mm dia 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

2.23 2.38 2.80 4.02 4.98 5.79 8.14 11.05 14.36 20.34 25.88 30.06

2.57 2.74 3.22 4.63 5.73 6.67 9.37 12.72 16.53 23.42 29.80 34.61

0.37 0.37 0.37 0.41 0.48 0.52 0.62 0.64 1.10 1.31 1.66 1.88

9.12 9.12 9.12 10.10 11.83 12.81 15.28 15.77 27.10 32.28 40.90 46.32

m m m m m m m m m m m m

11.68 11.86 12.34 14.73 17.56 19.48 24.65 28.49 43.64 55.69 70.70 80.93

Heavy weight 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

2.83 3.36 4.91 6.10 7.11 9.87 13.43 17.09 23.85 27.60 32.27

3.26 3.87 5.65 7.02 8.19 11.36 15.46 19.68 27.46 31.78 37.15

0.37 0.37 0.41 0.48 0.52 0.62 0.64 1.10 1.31 1.66 1.88

9.12 9.12 10.10 11.83 12.81 15.28 15.77 27.10 32.28 40.90 46.32

m m m m m m m m m m m

12.37 12.98 15.75 18.85 21.00 26.64 31.23 46.78 59.74 72.68 83.47

2.23 2.38 2.80 4.02 4.98 5.79 8.14 11.05 14.36 20.34 25.88 30.06

2.57 2.74 3.22 4.63 5.73 6.67 9.37 12.72 16.53 23.42 29.80 34.61

0.58 0.58 0.58 0.60 0.68 0.73 0.85 0.88 1.45 1.74 2.21 2.50

14.29 14.29 14.29 14.78 16.75 17.99 20.94 21.68 35.73 42.87 54.45 61.60

m m m m m m m m m m m m

16.86 17.03 17.51 19.41 22.49 24.65 30.31 34.40 52.26 66.29 84.25 96.20

Black steel pipes; butt welded joints; BS 1387: 1985; including protective painting. Fixed at High Level or Suspended with brackets measured separately (Refer to Screwed Steel Section). Welded butt joints are within the running length, but any flanges are additional Medium weight 10mm dia 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

280

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd BLACK WELDED STEEL – cont'd Black steel pipes; butt welded joints; BS 1387: 1985; including protective painting. Fixed at High Level or Suspended with brackets measured separately – cont'd Heavy weight 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

2.83 3.36 4.91 6.10 7.11 9.87 13.43 17.09 23.85 27.60 32.27

3.26 3.87 5.65 7.02 8.19 11.36 15.46 19.68 27.46 31.78 37.15

0.58 0.58 0.60 0.68 0.73 0.85 0.88 1.45 1.74 2.21 2.50

14.29 14.29 14.78 16.75 17.99 20.94 21.68 35.73 42.87 54.45 61.60

m m m m m m m m m m m

17.55 18.16 20.44 23.78 26.17 32.31 37.14 55.40 70.33 86.23 98.75

Welded flanges; PN6 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

2.95 2.95 2.95 4.90 5.22 5.37 7.90 11.86 12.96 16.99 17.16

3.40 3.40 3.40 5.64 6.01 6.18 9.10 13.65 14.92 19.56 19.76

0.59 0.69 0.84 1.00 1.11 1.37 1.54 1.67 2.22 2.61 2.99

14.54 17.00 20.70 24.64 27.35 33.75 37.94 41.15 54.70 64.31 73.67

nr nr nr nr nr nr nr nr nr nr nr

17.93 20.40 24.09 30.28 33.36 39.94 47.04 54.80 69.62 83.87 93.43

Welded flanges; PN16 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

5.91 5.91 5.91 7.98 7.98 10.48 12.09 15.37 15.68 24.90 29.72

6.80 6.80 6.80 9.19 9.19 12.07 13.92 17.70 18.05 28.67 34.22

0.59 0.69 0.84 1.00 1.11 1.37 1.54 1.67 2.22 2.61 2.99

14.54 17.00 20.70 24.64 27.35 33.75 37.94 41.15 54.70 64.31 73.67

nr nr nr nr nr nr nr nr nr nr nr

21.34 23.80 27.50 33.83 36.54 45.82 51.86 58.84 72.75 92.97 107.89

Fixings Refer to steel pipes; black malleable iron. For minimum fixing distances, refer to the Tables and Memoranda to the rear of the Extra over black steel butt welded pipes; black steel flanges, welded and drilled; metric; BS 4504

Material Costs/Prices for Measured Works – Mechanical Installations

281

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Blank flanges, slip on for welding; PN6 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

1.85 1.85 1.85 3.80 3.80 3.45 6.84 7.14 7.35 14.66 13.87

2.13 2.13 2.13 4.38 4.38 3.97 7.88 8.22 8.46 16.88 15.97

0.48 0.55 0.64 0.76 0.84 1.01 1.30 1.41 1.78 2.06 2.35

11.83 13.55 15.77 18.73 20.70 24.88 32.03 34.74 43.86 50.76 57.90

nr nr nr nr nr nr nr nr nr nr nr

13.96 15.68 17.90 23.10 25.07 28.86 39.91 42.96 52.32 67.63 73.87

Blank flanges, slip on for welding; PN16 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

1.68 2.58 3.14 3.21 4.15 6.44 7.90 10.25 12.70 18.64 24.05

1.93 2.97 3.62 3.70 4.78 7.41 9.10 11.80 14.62 21.46 27.69

0.48 0.55 0.64 0.76 0.84 1.01 1.30 1.41 1.78 2.06 2.35

11.83 13.55 15.77 18.73 20.70 24.88 32.03 34.74 43.86 50.76 57.90

nr nr nr nr nr nr nr nr nr nr nr

13.76 16.52 19.38 22.42 25.47 32.30 41.13 46.54 58.48 72.22 85.59

Welded flanges; Table E 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

6.06 6.06 6.06 6.06 6.24 7.97 9.70 12.74 18.81 36.59 36.59

6.98 6.98 6.98 6.98 7.18 9.18 11.17 14.67 21.66 42.13 42.13

0.59 0.69 0.84 1.00 1.11 1.37 1.54 1.67 2.22 2.61 2.99

14.54 17.00 20.70 24.64 27.35 33.75 37.94 41.15 54.70 64.31 73.67

nr nr nr nr nr nr nr nr nr nr nr

21.51 23.98 27.67 31.62 34.53 42.93 49.11 55.81 76.35 106.43 115.80

Blank flanges, slip on for welding; Table E 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

4.17 4.17 4.17 5.25 5.70 6.30 7.26 15.85 18.00 29.61 38.07

4.80 4.80 4.80 6.04 6.56 7.25 8.36 18.25 20.72 34.09 43.83

0.48 0.55 0.64 0.76 0.84 1.01 1.30 1.41 1.78 2.06 2.35

11.83 13.55 15.77 18.73 20.70 24.88 32.03 34.74 43.86 50.76 57.90

nr nr nr nr nr nr nr nr nr nr nr

16.63 18.35 20.57 24.77 27.26 32.14 40.39 52.99 64.58 84.85 101.73

Extra over black steel butt welded pipes; black steel flanges, welding and drilled; imperial; BS 10

282

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd BLACK WELDED STEEL – cont'd Extra over black steel butt welded pipes; black steel flange connections Bolted connection between pair of flanges; including gasket, bolts, nuts and washers 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

6.45 7.63 11.46 12.44 14.63 20.91

7.43 8.78 13.19 14.32 16.84 24.07

0.50 0.50 0.50 0.50 0.50 0.88

12.32 12.32 12.32 12.32 12.32 21.68

nr nr nr nr nr nr

19.75 21.10 25.51 26.64 29.16 45.76

Cap 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

14.31 14.31 14.39 16.82 19.76 20.11 26.29 36.99 42.78

16.48 16.48 16.57 19.37 22.75 23.15 30.27 42.59 49.25

0.47 0.59 0.70 0.99 1.35 1.66 2.23 3.03 3.79

11.58 14.54 17.25 24.39 33.26 40.90 54.94 74.65 93.38

nr nr nr nr nr nr nr nr nr

28.06 31.01 33.81 43.76 56.01 64.05 85.21 117.24 142.63

Concentric reducer 20 x 15mm dia 25 x 15mm dia 25 x 20mm dia 32 x 25mm dia 40 x 25mm dia 40 x 32mm dia 50 x 25mm dia 50 x 40mm dia 65 x 50mm dia 80 x 50mm dia 100 x 50mm dia 100 x 80mm dia 125 x 80mm dia 150 x 100mm dia

7.97 9.94 7.69 10.60 13.81 9.46 13.14 9.31 12.85 13.07 21.64 14.89 32.52 35.17

9.18 11.44 8.85 12.20 15.90 10.89 15.13 10.72 14.79 15.05 24.91 17.14 37.44 40.49

0.69 0.87 0.87 1.08 1.38 1.38 1.82 1.82 2.52 3.24 4.08 4.08 4.71 5.33

17.00 21.44 21.44 26.61 34.00 34.00 44.84 44.84 62.09 79.83 100.52 100.52 116.05 131.32

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

26.18 32.88 30.29 38.81 49.90 44.89 59.97 55.56 76.88 94.88 125.44 117.67 153.49 171.81

Eccentric reducer 20 x 15mm dia 25 x 15mm dia 25 x 20mm dia 32 x 25mm dia 40 x 25mm dia 40 x 32mm dia 50 x 25mm dia 50 x 40mm dia 65 x 50mm dia 80 x 50mm dia 100 x 50mm dia 100 x 80mm dia 125 x 80mm dia 150 x 100mm dia

11.84 15.51 13.01 14.39 17.77 16.97 20.24 14.59 17.21 21.07 35.69 26.33 70.34 53.27

13.63 17.86 14.98 16.57 20.46 19.54 23.30 16.80 19.81 24.26 41.09 30.31 80.98 61.33

0.69 0.87 0.87 1.08 1.38 1.38 1.82 1.82 2.52 3.24 4.08 4.08 4.71 5.33

17.00 21.44 21.44 26.61 34.00 34.00 44.84 44.84 62.09 79.83 100.52 100.52 116.05 131.32

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

30.63 39.29 36.41 43.18 54.46 53.54 68.14 61.64 81.90 104.09 141.62 130.84 197.03 192.65

Extra over fittings; BS 1965; butt welded

Material Costs/Prices for Measured Works – Mechanical Installations

283

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

45° elbow, long radius 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

2.99 3.03 3.94 4.78 4.83 6.62 8.53 7.87 11.91 25.32 31.45

3.44 3.49 4.54 5.50 5.56 7.62 9.82 9.06 13.71 29.15 36.21

0.56 0.75 0.93 1.17 1.46 1.97 2.70 3.32 4.09 4.94 5.78

13.80 18.48 22.91 28.83 35.97 48.54 66.52 81.80 100.77 121.71 142.41

nr nr nr nr nr nr nr nr nr nr nr

17.24 21.97 27.45 34.33 41.53 56.16 76.34 90.86 114.48 150.87 178.62

90° elbow, long radius 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

3.09 3.02 4.01 4.79 4.84 6.62 8.53 9.26 14.01 29.15 37.00

3.56 3.48 4.62 5.51 5.57 7.62 9.82 10.66 16.13 33.56 42.60

0.56 0.75 0.93 1.17 1.46 1.97 2.70 3.32 4.09 4.94 5.78

13.80 18.48 22.91 28.83 35.97 48.54 66.52 81.80 100.77 121.71 142.41

nr nr nr nr nr nr nr nr nr nr nr

17.36 21.96 27.53 34.34 41.54 56.16 76.34 92.46 116.90 155.27 185.01

Branch Bend (based on branch and pipe sizes being the same) 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

12.32 12.21 12.34 11.65 11.50 11.18 16.52 25.81 33.66 59.32 91.21

14.18 14.06 14.21 13.41 13.24 12.87 19.02 29.72 38.75 68.30 105.01

0.85 0.85 1.02 1.11 1.36 1.70 1.78 1.82 1.87 2.21 2.65

20.94 20.94 25.13 27.35 33.51 41.89 43.86 44.84 46.07 54.45 65.29

nr nr nr nr nr nr nr nr nr nr nr

35.13 35.00 39.34 40.76 46.75 54.76 62.88 74.56 84.83 122.75 170.30

29.20 29.20 29.20 29.20 29.20 30.75 44.86 44.93 55.90 127.95 139.76

33.62 33.62 33.62 33.62 33.62 35.40 51.65 51.73 64.36 147.31 160.91

0.82 1.10 1.35 1.63 2.14 3.02 3.61 4.18 5.24 6.70 8.45

20.20 27.10 33.26 40.16 52.73 74.41 88.94 102.99 129.11 165.08 208.19

nr nr nr nr nr nr nr nr nr nr nr

53.82 60.72 66.88 73.78 86.34 109.81 140.59 154.72 193.46 312.39 369.10

Equal tee 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

284

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd BLACK WELDED STEEL – cont'd Extra over black steel butt welded pipes; labour Made bend 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

-

-

0.42 0.42 0.50 0.62 0.74 0.89 1.05 1.13 2.90 3.56 4.18

10.35 10.35 12.32 15.28 18.23 21.93 25.87 27.84 71.45 87.71 102.99

nr nr nr nr nr nr nr nr nr nr nr

10.35 10.35 12.32 15.28 18.23 21.93 25.87 27.84 71.45 87.71 102.99

Splay cut end 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

-

-

0.14 0.16 0.18 0.25 0.27 0.31 0.35 0.40 0.48 0.56 0.64

3.45 3.94 4.43 6.16 6.65 7.64 8.62 9.86 11.83 13.80 15.77

nr nr nr nr nr nr nr nr nr nr nr

3.45 3.94 4.43 6.16 6.65 7.64 8.62 9.86 11.83 13.80 15.77

Screwed joint to fitting 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

-

-

0.30 0.40 0.46 0.53 0.61 0.73 0.89 1.05 1.46 2.10 2.73

7.39 9.86 11.33 13.06 15.03 17.99 21.93 25.87 35.97 51.74 67.26

nr nr nr nr nr nr nr nr nr nr nr

7.39 9.86 11.33 13.06 15.03 17.99 21.93 25.87 35.97 51.74 67.26

Straight butt weld 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

-

-

0.31 0.42 0.52 0.69 0.83 1.22 1.57 1.95 2.38 2.83 3.27

7.64 10.35 12.81 17.00 20.45 30.06 38.68 48.04 58.64 69.73 80.57

nr nr nr nr nr nr nr nr nr nr nr

7.64 10.35 12.81 17.00 20.45 30.06 38.68 48.04 58.64 69.73 80.57

Material Costs/Prices for Measured Works – Mechanical Installations

285

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

CARBON WELDED STEEL Hot finished seamless carbon steel pipe; BS 806 and BS 3601; wall thickness to BS 3600; butt welded joints; including protective painting, fixed vertically or at low level, brackets measured separately (Refer to Screwed Pipework Section). Welded butt joints are within the running length, but any flanges are additional Pipework 200mm 250mm 300mm 350mm 400mm

dia dia dia dia dia

73.79 66.44 156.21 164.86 287.43

84.96 76.49 179.85 189.81 330.93

2.04 2.59 2.99 3.52 4.08

50.26 63.81 73.67 86.73 100.52

m m m m m

135.22 140.31 253.52 276.53 431.45

73.79 66.44 156.21 164.86 287.43

84.96 76.49 179.85 189.81 330.93

3.70 4.73 5.65 6.68 7.70

91.16 116.54 139.21 164.58 189.72

m m m m m

176.12 193.03 319.06 354.39 520.64

60.42 115.94 126.82 195.39 226.00

69.56 133.48 146.01 224.96 260.20

3.70 4.73 5.65 6.68 7.70

91.16 116.54 139.21 164.58 189.72

nr nr nr nr nr

160.73 250.02 285.22 389.54 449.92

Hot finished seamless carbon steel pipe; BS 806 and BS 3601; wall thickness to BS 3600; butt welded joints; including protective painting, fixed at high level or suspended, brackets measured separately (Refer to Screwed Pipework Section). Welded butt joints are within the running length, but any flanges are additional Pipework 200mm 250mm 300mm 350mm 400mm

dia dia dia dia dia

Fixings Refer to steel pipes; black malleable iron. For minimum fixing distances, refer to the Tables and Memoranda to the rear of the book Extra over fittings; BS 1965 part 1; butt welded Cap 200mm 250mm 300mm 350mm 400mm

dia dia dia dia dia

Material Costs/Prices for Measured Works – Mechanical Installations

286

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd CARBON WELDED STEEL – cont'd Fixings – cont'd Concentric reducer 200mm x 150mm 250mm x 150mm 250mm x 200mm 300mm x 150mm 300mm x 200mm 300mm x 250mm 350mm x 200mm 350mm x 250mm 350mm x 300mm 400mm x 250mm 400mm x 300mm 400mm x 350mm

dia dia dia dia dia dia dia dia dia dia dia dia

66.01 95.72 58.58 110.56 114.50 101.79 173.63 145.58 145.58 212.86 175.43 229.77

76.00 110.20 67.44 127.29 131.83 117.19 199.90 167.61 167.61 245.07 201.98 264.54

7.27 9.05 9.10 10.75 10.75 11.15 12.50 12.70 13.00 14.46 14.51 15.16

179.12 222.98 224.21 264.86 264.86 274.72 307.98 312.91 320.30 356.27 357.50 373.52

nr nr nr nr nr nr nr nr nr nr nr nr

255.12 333.18 291.65 392.15 396.69 391.91 507.88 480.52 487.91 601.34 559.48 638.06

Eccentric reducer 200mm x 150mm 250mm x 150mm 250mm x 200mm 300mm x 150mm 300mm x 200mm 300mm x 250mm 350mm x 200mm 350mm x 250mm 350mm x 300mm 400mm x 250mm 400mm x 300mm 400mm x 350mm

dia dia dia dia dia dia dia dia dia dia dia dia

119.21 158.85 103.94 190.56 219.79 176.92 201.87 167.83 167.83 306.66 252.41 223.91

137.25 182.89 119.67 219.40 253.05 203.69 232.42 193.23 193.23 353.07 290.61 257.79

7.27 9.05 9.10 10.75 10.75 11.15 12.50 12.70 13.00 14.46 14.51 15.16

179.12 222.98 224.21 264.86 264.86 274.72 307.98 312.91 320.30 356.27 357.50 373.52

nr nr nr nr nr nr nr nr nr nr nr nr

316.37 405.87 343.88 484.26 517.91 478.41 540.40 506.13 513.53 709.34 648.11 631.31

45° elbow 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia

63.13 118.57 173.23 140.19 233.00

72.68 136.51 199.44 161.40 268.26

7.75 10.05 12.20 14.65 17.12

190.95 247.62 300.59 360.95 421.81

nr nr nr nr nr

263.63 384.13 500.03 522.36 690.07

90° elbow 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia

74.27 139.51 203.81 280.19 357.88

85.51 160.62 234.65 322.59 412.04

7.75 10.05 12.20 14.65 17.12

190.95 247.62 300.59 360.95 421.81

nr nr nr nr nr

276.46 408.24 535.24 683.54 833.85

Equal tee 200mm 250mm 300mm 350mm 400mm

196.22 336.45 417.55 199.07 224.72

225.91 387.36 480.74 229.19 258.73

11.25 14.53 17.55 20.98 24.38

277.18 358.00 432.40 516.91 600.68

nr nr nr nr nr

503.10 745.36 913.14 746.11 859.41

dia dia dia dia dia

Material Costs/Prices for Measured Works – Mechanical Installations

287

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over black steel butt welded pipes; labour Straight butt weld 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia

-

-

4.08 5.20 6.22 7.33 8.41

100.52 128.12 153.25 180.60 207.21

nr nr nr nr nr

100.52 128.12 153.25 180.60 207.21

Branch weld 100mm dia 125mm dia 150mm dia

-

-

3.46 4.23 5.00

85.25 104.22 123.19

nr nr nr

85.25 104.22 123.19

Extra over black steel butt welded pipes; black steel flanges, welding and drilled; metric; BS 4504 Welded flanges; PN16 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia

40.40 58.03 81.29 157.22 207.57

46.51 66.81 93.59 181.01 238.98

4.10 5.33 6.40 7.43 8.45

101.02 131.32 157.69 183.06 208.19

nr nr nr nr nr

147.53 198.13 251.28 364.07 447.18

Welded flanges; PN25 200mm dia 250mm dia 300mm dia

134.14 160.79 217.44

154.44 185.12 250.34

4.10 5.33 6.40

101.02 131.32 157.69

nr nr nr

255.46 316.44 408.03

Blank flanges, slip on for welding; PN16 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia

93.41 141.96 151.68 237.38 313.88

107.55 163.44 174.63 273.30 361.38

2.70 3.48 4.20 4.78 5.35

66.52 85.74 103.48 117.77 131.82

nr nr nr nr nr

174.07 249.18 278.11 391.07 493.19

Blank flanges, slip on for welding; PN25 200mm dia 250mm dia 300mm dia

93.41 141.96 151.68

107.55 163.44 174.63

2.70 3.48 4.20

66.52 85.74 103.48

nr nr nr

174.07 249.18 278.11

78.39 121.32 165.41

90.25 139.68 190.44

3.83 4.93 5.90

94.37 121.47 145.37

nr nr nr

184.62 261.15 335.81

Extra over black steel butt welded pipes; black steel flange connections Bolted connection between pair of flanges; including gasket, bolts, nuts and washers 200mm dia 250mm dia 300mm dia

Material Costs/Prices for Measured Works – Mechanical Installations

288

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PRESSFIT Pressfit jointing system; operating temperature -20°C to +120°C; operating pressure 16 bar ; butyl rubber 'O' ring mechanical joint. With brackets measured separately (Refer to Screwed Steel Section) Carbon steel Pipework 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

1.28 2.05 2.88 3.72 5.09 6.60

1.47 2.36 3.32 4.28 5.86 7.60

0.46 0.48 0.52 0.56 0.58 0.66

11.33 11.83 12.81 13.80 14.29 16.26

m m m m m m

12.81 14.19 16.13 18.08 20.15 23.86

0.87 1.05 1.33 2.23 2.98 3.52

1.00 1.21 1.53 2.57 3.43 4.05

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

9.87 10.08 12.37 13.41 16.24 18.84

0.80 1.05 1.11 1.23 1.32 2.86 8.25 8.31 8.74

0.92 1.21 1.28 1.42 1.52 3.29 9.50 9.57 10.06

0.36 0.40 0.40 0.40 0.44 0.48 0.48 0.52 0.56

8.87 9.86 9.86 9.86 10.84 11.83 11.83 12.81 13.80

nr nr nr nr nr nr nr nr nr

9.79 11.06 11.13 11.27 12.36 15.12 21.32 22.38 23.86

90° Elbow 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

1.26 1.65 2.26 5.64 9.02 10.78

1.45 1.90 2.60 6.49 10.38 12.41

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

10.32 10.77 13.44 17.33 23.20 27.19

45° Elbow 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

1.50 1.67 2.27 4.47 5.61 6.34

1.73 1.92 2.61 5.15 6.46 7.30

0.36 0.36 0.44 0.44 0.52 0.60

8.87 8.87 10.84 10.84 12.81 14.78

nr nr nr nr nr nr

10.60 10.79 13.45 15.99 19.27 22.08

Extra over for Carbon Steel pressfit fittings Coupling 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia Reducer 20 x 15mm 25 x 15mm 25 x 20mm 32 x 20mm 32 x 25mm 40 x 32mm 50 x 20mm 50 x 25mm 50 x 40mm

dia dia dia dia dia dia dia dia dia

Material Costs/Prices for Measured Works – Mechanical Installations

289

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Equal tee 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

Material £

Labour hours

Labour £

Unit

Total rate £

2.40 2.78 3.72 5.80 8.56 10.27

2.76 3.20 4.28 6.68 9.86 11.82

0.54 0.54 0.66 0.66 0.78 0.90

13.30 13.30 16.26 16.26 19.22 22.17

nr nr nr nr nr nr

16.07 16.51 20.54 22.94 29.07 34.00

2.73 3.68 4.00 5.40 5.84 5.93 7.82 8.11 7.92 9.32 9.50 9.78 10.26

3.14 4.24 4.61 6.22 6.72 6.83 9.00 9.34 9.12 10.73 10.94 11.26 11.81

0.54 0.62 0.62 0.62 0.62 0.62 0.70 0.70 0.70 0.82 0.82 0.82 0.82

13.30 15.28 15.28 15.28 15.28 15.28 17.25 17.25 17.25 20.20 20.20 20.20 20.20

nr nr nr nr nr nr nr nr nr nr nr nr nr

16.45 19.51 19.88 21.49 22.00 22.10 26.25 26.58 26.37 30.93 31.14 31.46 32.02

11.67 12.23 15.87 32.21 26.00

13.44 14.08 18.27 37.08 29.93

0.58 0.68 0.79 1.02 1.15

14.29 16.75 19.46 25.13 28.33

m m m m m

27.73 30.83 37.74 62.22 58.27

Couplings 65mm 80mm 100mm 125mm 150mm

11.67 12.23 15.87 32.21 26.00

13.44 14.08 18.27 37.08 29.93

0.41 0.41 0.66 0.68 0.80

10.10 10.10 16.26 16.75 19.71

nr nr nr nr nr

23.54 24.18 34.53 53.84 49.65

Concentric reducers (one size down) 80mm 100mm 125mm 150mm

18.73 18.77 32.36 41.95

21.56 21.61 37.26 48.30

0.59 0.71 0.85 0.98

14.54 17.49 20.94 24.15

nr nr nr nr

36.10 39.10 58.20 72.44

Short radius elbow; 90° 65mm 80mm 100mm 125mm 150mm

21.44 21.89 29.30 48.32 62.72

24.68 25.20 33.73 55.63 72.21

0.53 0.61 0.80 0.90 0.94

13.06 15.03 19.71 22.17 23.16

nr nr nr nr nr

37.74 40.23 53.44 77.81 95.37

Reducing tee 20 x 15mm 25 x 15mm 25 x 20mm 32 x 15mm 32 x 20mm 32 x 25mm 40 x 20mm 40 x 25mm 40 x 32mm 50 x 20mm 50 x 25mm 50 x 32mm 50 x 40mm

dia dia dia dia dia dia dia dia dia dia dia dia dia

MECHANICAL GROOVED Mechanical grooved jointing system; working temperature not exceeding 82° C BS 5750; pipework complete with grooved joints; painted finish. With brackets measured separately (Refer to Screwed Steel Section) Grooved Joints 65 mm 80 mm 100 mm 125 mm 150mm Extra over mechanical grooved system fittings

290

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd MECHANICAL GROOVED – cont'd Extra over mechanical grooved system fittings – cont'd Short radius elbow; 45° 65mm 80mm 100mm 125mm 150mm Equal tee 65mm 80mm 100mm 125mm 150mm

18.36 20.63 25.64 43.37 47.75

21.14 23.75 29.52 49.93 54.98

0.53 0.61 0.80 0.90 0.94

13.06 15.03 19.71 22.17 23.16

nr nr nr nr nr

34.20 38.78 49.23 72.11 78.14

38.61 40.91 45.74 121.31 112.47

44.45 47.10 52.66 139.67 129.49

0.83 0.93 1.18 1.37 1.43

20.45 22.91 29.07 33.75 35.23

nr nr nr nr nr

64.90 70.01 81.73 173.42 164.72

2.27 3.42 3.90 5.21 7.58 12.51 16.18 24.95 37.52 40.20

2.61 3.94 4.49 6.00 8.73 14.40 18.63 28.73 43.20 46.28

0.35 0.39 0.43 0.47 0.51 0.52 0.60 0.69 0.69 0.85

8.62 9.61 10.59 11.58 12.57 12.81 14.78 17.00 17.00 20.94

m m m m m m m m m m

11.24 13.55 15.08 17.58 21.29 27.22 33.41 45.73 60.20 67.23

1.51 2.77 5.54

1.74 3.19 6.38

0.51 0.56 0.65

12.57 13.80 16.02

nr nr nr

14.30 16.99 22.39

PLASTIC PIPEWORK Polypropylene PP-R 80 pipe, mechanically stabilised by fibre compound mixture in middle layer; suitable for continuous working temperatures of 0–90°C; thermally fused joints in the running length Pipe; 4m long; PN 20 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia 75mm dia 90mm dia 110mm dia 125mm dia Fixings Refer to steel pipes; black malleable iron. For minimum fixing distances, refer to the Tables and Memoranda to the rear of the book Extra over fittings; thermally fused joints Overbridge bow 20mm dia 25mm dia 32mm dia

Material Costs/Prices for Measured Works – Mechanical Installations

291

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Elbow 90° 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia 75mm dia 90mm dia 110mm dia 125mm dia

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

0.51 0.67 0.97 1.52 3.28 5.02 11.11 20.52 29.18 44.95

0.59 0.77 1.12 1.75 3.78 5.78 12.79 23.63 33.60 51.75

0.44 0.52 0.59 0.66 0.73 0.85 0.85 1.04 1.04 1.30

10.84 12.81 14.54 16.26 17.99 20.94 20.94 25.62 25.62 32.03

nr nr nr nr nr nr nr nr nr nr

11.43 13.58 15.65 18.01 21.76 26.72 33.73 49.25 59.22 83.78

Long bend 90° 20mm dia 25mm dia 32mm dia 40mm dia

2.70 2.82 3.31 6.06

3.11 3.25 3.81 6.98

0.48 0.57 0.65 0.73

11.83 14.04 16.02 17.99

nr nr nr nr

14.93 17.29 19.83 24.96

Elbow 90°, female/male 20mm dia 25mm dia 32mm dia

0.52 0.68 0.98

0.60 0.78 1.13

0.44 0.52 0.59

10.84 12.81 14.54

nr nr nr

11.44 13.59 15.66

0.52 0.68 0.98 1.53 3.28 5.03 11.12 20.52 29.19 44.96

0.60 0.78 1.13 1.76 3.78 5.79 12.80 23.63 33.61 51.76

0.44 0.52 0.59 0.66 0.73 0.85 0.85 1.04 1.04 1.30

10.84 12.81 14.54 16.26 17.99 20.94 20.94 25.62 25.62 32.03

nr nr nr nr nr nr nr nr nr nr

11.44 13.59 15.66 18.02 21.76 26.73 33.75 49.25 59.23 83.79

0.52 0.68 0.98

0.60 0.78 1.13

0.44 0.52 0.59

10.84 12.81 14.54

nr nr nr

11.44 13.59 15.66

0.71 0.96 1.25 1.92 5.46 7.83 13.05 24.02 37.48 49.80

0.82 1.11 1.44 2.21 6.29 9.01 15.02 27.65 43.15 57.34

0.61 0.72 0.83 0.92 1.01 1.11 1.18 1.46 1.46 1.82

15.03 17.74 20.45 22.67 24.88 27.35 29.07 35.97 35.97 44.84

nr nr nr nr nr nr nr nr nr nr

15.85 18.84 21.89 24.88 31.17 36.36 44.10 63.63 79.12 102.18

Elbow 45° 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia 75mm dia 90mm dia 110mm dia 125mm dia Elbow 45°, female/male 20mm dia 25mm dia 32mm dia T-Piece 90° 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia 75mm dia 90mm dia 110mm dia 125mm dia

292

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PLASTIC PIPEWORK – cont'd Fixings – cont'd T-Piece 90° reducing 25 x 20 x 25mm 32 x 20 x 32mm 32 x 25 x 32mm 40 x 20 x 40mm 40 x 25 x 40mm 40 x 32 x 40mm 50 x 25 x 50mm 50 x 32 x 50mm 50 x 40 x 50mm 63 x 20 x 63mm 63 x 25 x 63mm 63 x 32 x 63mm 63 x 40 x 63mm 63 x 50 x 63mm 75 x 20 x 75mm 75 x 25 x 75mm 75 x 32 x 75mm 75 x 40 x 75mm 75 x 50 x 75mm 75 x 63 x 75mm 25 x 20 x 20mm 90 x 63 x 90mm 110 x 75 x 110mm 110 x 90 x 110mm 125 x 90 x 125mm 125 x 110 x 125mm

0.98 1.25 1.25 1.92 1.92 1.92 5.46 5.46 5.46 7.37 7.37 7.37 7.37 7.37 11.98 11.98 11.98 11.98 11.98 11.98 0.98 24.02 37.48 37.48 44.58 45.49

1.13 1.44 1.44 2.21 2.21 2.21 6.29 6.29 6.29 8.49 8.49 8.49 8.49 8.49 13.79 13.79 13.79 13.79 13.79 13.79 1.13 27.65 43.15 43.15 51.33 52.37

0.72 0.83 0.83 0.92 0.92 0.92 1.01 1.01 1.01 1.11 1.11 1.11 1.01 1.01 1.18 1.18 1.18 1.18 1.18 1.18 0.72 1.46 1.46 1.46 1.82 1.82

17.74 20.45 20.45 22.67 22.67 22.67 24.88 24.88 24.88 27.35 27.35 27.35 24.88 24.88 29.07 29.07 29.07 29.07 29.07 29.07 17.74 35.97 35.97 35.97 44.84 44.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

18.87 21.89 21.89 24.88 24.88 24.88 31.17 31.17 31.17 35.83 35.83 35.83 33.37 33.37 42.87 42.87 42.87 42.87 42.87 42.87 18.87 63.63 79.12 79.12 96.17 97.22

Reducer 25 x 20mm 32 x 20mm 32 x 25mm 40 x 20mm 40 x 25mm 40 x 32mm 50 x 20mm 50 x 25mm 50 x 32mm 50 x 40mm 63 x 40mm 63 x 25mm 63 x 32mm 63 x 50mm 75 x 50mm 75 x 63mm 90 x 63mm 90 x 75mm 110 x 90mm 125 x 110mm

0.56 0.72 0.72 1.15 1.15 1.15 1.84 1.84 1.84 1.84 3.72 3.72 3.72 3.72 4.15 4.15 9.27 9.27 14.98 23.41

0.64 0.83 0.83 1.32 1.32 1.32 2.12 2.12 2.12 2.12 4.28 4.28 4.28 4.28 4.78 4.78 10.67 10.67 17.25 26.95

0.59 0.62 0.62 0.66 0.66 0.66 0.73 0.73 0.73 0.73 0.78 0.78 0.78 0.78 0.85 0.85 1.04 1.04 1.17 1.43

14.54 15.28 15.28 16.26 16.26 16.26 17.99 17.99 17.99 17.99 19.22 19.22 19.22 19.22 20.94 20.94 25.62 25.62 28.83 35.23

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

15.18 16.10 16.10 17.59 17.59 17.59 20.10 20.10 20.10 20.10 23.50 23.50 23.50 23.50 25.72 25.72 36.30 36.30 46.07 62.19

Material Costs/Prices for Measured Works – Mechanical Installations

293

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Socket 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia 75mm dia 90mm dia 110mm dia 125mm dia

0.50 0.56 0.72 0.89 1.84 3.72 4.15 10.71 18.20 25.36

0.58 0.64 0.83 1.02 2.12 4.28 4.78 12.33 20.95 29.20

0.51 0.56 0.65 0.74 0.81 0.86 0.91 0.91 0.91 1.30

12.57 13.80 16.02 18.23 19.96 21.19 22.42 22.42 22.42 32.03

nr nr nr nr nr nr nr nr nr nr

13.14 14.44 16.84 19.26 22.08 25.47 27.20 34.75 43.38 61.23

End Cap 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia 75mm dia 90mm dia 110mm dia 125mm dia

0.78 0.96 1.18 1.89 2.62 4.41 6.35 14.39 17.29 26.35

0.90 1.11 1.36 2.18 3.02 5.08 7.31 16.57 19.91 30.34

0.25 0.29 0.33 0.36 0.40 0.44 0.47 0.57 0.57 0.85

6.16 7.15 8.13 8.87 9.86 10.84 11.58 14.04 14.04 20.94

nr nr nr nr nr nr nr nr nr nr

7.06 8.25 9.49 11.05 12.87 15.92 18.89 30.61 33.95 51.28

17.48 21.99 26.60 31.94 37.48 50.72 71.02 101.79

20.13 25.32 30.63 36.77 43.15 58.40 81.77 117.19

0.23 0.27 0.38 0.43 0.48 0.53 0.53 0.75

5.67 6.65 9.36 10.59 11.83 13.06 13.06 18.48

nr nr nr nr nr nr nr nr

25.79 31.97 39.99 47.37 54.98 71.45 94.83 135.67

Weld in saddle with female thread 40 – 1/2" 50 – 1/2" 63 – 1/2" 75 – 1/2" 90 – 1/2" 110 – 1/2"

1.27 1.27 1.27 1.27 1.27 1.27

1.46 1.46 1.46 1.46 1.46 1.46

0.36 0.36 0.40 0.40 0.46 0.46

8.87 8.87 9.86 9.86 11.33 11.33

nr nr nr nr nr nr

10.33 10.33 11.32 11.32 12.80 12.80

Weld in saddle with male thread 50 – 1/2" 63 – 1/2" 75 – 1/2" 90 – 1/2" 110 – 1/2"

1.27 1.27 1.27 1.27 1.27

1.46 1.46 1.46 1.46 1.46

0.36 0.40 0.40 0.46 0.46

8.87 9.86 9.86 11.33 11.33

nr nr nr nr nr

10.33 11.32 11.32 12.80 12.80

Transition piece, round with female thread 20 x 1/2" 20 x 3/4" 25 x 1/2" 25 x 3/4"

2.94 3.87 2.94 3.87

3.38 4.46 3.38 4.46

0.29 0.29 0.33 0.33

7.15 7.15 8.13 8.13

nr nr nr nr

10.53 11.60 11.52 12.59

Stub flange with gasket 32mm dia 40mm dia 50mm dia 63mm dia 75mm dia 90mm dia 110mm dia 125mm dia

Material Costs/Prices for Measured Works – Mechanical Installations

294

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PLASTIC PIPEWORK – cont'd Fixings – cont'd Transition piece, hexagon with female thread 32 x 1" 40 x 1 1/4" 50 x 1 1/2" 63 x 2" 75 x 2" 125 x 5" Stop valve for surface assembly 20mm dia 25mm dia 32mm dia Ball valve 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 63mm dia

10.94 17.31 20.09 31.13 32.47 184.38

12.60 19.93 23.13 35.84 37.38 212.28

0.36 0.36 0.36 0.40 0.40 0.51

8.87 8.87 8.87 9.86 9.86 12.57

nr nr nr nr nr nr

21.47 28.80 32.00 45.70 47.24 224.85

12.08 12.08 22.75

13.91 13.91 26.19

0.25 0.29 0.33

6.16 7.15 8.13

nr nr nr

20.07 21.05 34.32

42.54 45.58 54.76 69.90 95.96 108.19

48.98 52.48 63.05 80.48 110.48 124.56

0.25 0.29 0.33 0.36 0.40 0.44

6.16 7.15 8.13 8.87 9.86 10.84

nr nr nr nr nr nr

55.14 59.62 71.18 89.35 120.34 135.40

0.46 0.49 0.55 1.21 1.34

0.53 0.56 0.63 1.39 1.54

0.16 0.22 0.22 0.24 0.26 0.26

3.94 5.42 5.42 5.91 6.41 6.41

nr nr nr nr nr nr

3.94 5.95 5.98 6.55 7.80 7.95

2.81 3.00 3.11 3.18 3.59 4.29

3.24 3.45 3.58 3.66 4.13 4.94

0.16 0.17 0.21 0.22 0.26 0.26

3.94 4.19 5.17 5.42 6.41 6.41

nr nr nr nr nr nr

7.18 7.64 8.75 9.08 10.54 11.35

Floor or ceiling cover plates Plastic 15mm 20mm 25mm 32mm 40mm 50mm

dia dia dia dia dia dia

Chromium plated 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

Material Costs/Prices for Measured Works – Mechanical Installations

295

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Y11 – PIPELINE ANCILLARIES EXPANSION JOINTS Axial movement bellows expansion joints; stainless steel Screwed ends for steel pipework; up to 6 bar G at 100°C 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

67.98 72.61 84.27 67.98 72.61 84.27

78.27 83.60 97.02 78.27 83.60 97.02

0.68 0.81 0.93 1.06 1.16 1.19

16.75 19.96 22.91 26.12 28.58 29.32

nr nr nr nr nr nr

95.02 103.55 119.94 104.38 112.18 126.34

Screwed ends for steel pipework; aluminium and steel outer sleeves; up to 16 bar G at 120°C 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

67.98 72.61 84.27 67.98 72.61

78.27 83.60 97.02 78.27 83.60

1.32 1.52 1.80 2.03 2.26

32.52 37.45 44.35 50.02 55.68

nr nr nr nr nr

110.79 121.05 141.37 128.28 139.28

Flanged ends for steel pipework; aluminium and steel outer sleeves; up to 16 bar G at 120°C 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

65.52 70.20 96.72 104.52 124.02

75.43 80.82 111.36 120.34 142.79

0.53 0.64 0.74 0.82 0.89

13.06 15.77 18.23 20.20 21.93

nr nr nr nr nr

88.49 96.59 129.59 140.54 164.72

Flanged ends for steel pipework; up to 16 bar G at 120°C 65mm dia 80mm dia 100mm dia 150mm dia

114.66 123.24 141.18 216.06

132.01 141.89 162.54 248.76

1.10 1.31 1.78 3.08

27.10 32.28 43.86 75.89

nr nr nr nr

159.11 174.17 206.40 324.64

Screwed ends for non-ferrous pipework; up to 6 bar G at 100°C 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

67.98 72.61 84.27 67.98 72.61

78.27 83.60 97.02 78.27 83.60

0.72 0.84 1.02 1.11 1.18

17.74 20.70 25.13 27.35 29.07

nr nr nr nr nr

96.01 104.29 122.15 105.62 112.67

147.42 152.10 175.50 287.82

169.73 175.12 202.06 331.37

0.87 0.95 1.15 1.36

21.44 23.41 28.33 33.51

nr nr nr nr

191.16 198.52 230.39 364.88

Flanged ends for steel, copper or non-ferrous pipework; up to 16 bar G at 120°C 65mm dia 80mm dia 100mm dia 150mm dia

296

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd EXPANSION JOINTS – cont'd Angular movement bellows expansion joints; stainless steel Flanged ends for steel pipework; up to 16 bar G at 120°C 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

169.94 206.24 241.00 311.14 410.97 488.68

195.66 237.45 277.47 358.22 473.16 562.63

0.71 0.83 0.91 0.97 1.16 1.18

17.49 20.45 22.42 23.90 28.58 29.07

nr nr nr nr nr nr

213.15 257.90 299.89 382.12 501.74 591.70

Bronze gate valve; non-rising stem; BS 5154, series B, PN 32; working pressure up to 14 bar for saturated steam, 32 bar from -10°C to 100° C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

35.42 45.95 62.24 85.96 115.43 162.19

40.78 52.90 71.66 98.97 132.90 186.73

1.11 1.28 1.49 1.88 2.31 2.80

27.35 31.54 36.71 46.32 56.91 68.99

nr nr nr nr nr nr

68.13 84.44 108.37 145.29 189.81 255.72

Bronze gate valve; non-rising stem; BS 5154, series B, PN 20; working pressure up to 9 bar for saturated steam, 20 bar from -10°C to 100° C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

24.16 34.33 44.42 63.38 86.75 123.96

27.82 39.52 51.14 72.97 99.88 142.72

0.84 1.01 1.19 1.38 1.62 1.94

20.70 24.88 29.32 34.00 39.91 47.80

nr nr nr nr nr nr

48.51 64.41 80.46 106.97 139.79 190.52

Bronze gate valve; non-rising stem; BS 5154, series B, PN 16; working pressure up to 7 bar for saturated steam, 16 bar from -10°C to 100° C; BS4504 flanged ends; bolted connections 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia

119.96 157.98 198.21 239.64 331.29 514.51 728.21 1323.37

138.11 181.89 228.20 275.90 381.42 592.37 838.41 1523.63

2.81 1.24 1.31 1.43 1.53 1.63 1.71 1.88 2.03

69.23 30.55 32.28 35.23 37.70 40.16 42.13 46.32 50.02

nr nr nr nr nr nr nr nr nr

69.23 168.66 214.16 263.44 313.60 421.58 634.50 884.73 1573.64

VALVES Isolating valves

Material Costs/Prices for Measured Works – Mechanical Installations

297

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Cast iron gate valve; bronze trim; non rising stem; BS 5150, PN6; working pressure 6 bar from -10°C to 120°C; BS4504 flanged ends; bolted connections 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

215.47 225.21 260.27 329.22 471.26 542.27 1032.89 1589.31 1885.04

248.08 259.29 299.66 379.04 542.57 624.33 1189.19 1829.81 2170.29

1.85 2.00 2.27 2.76 6.05 8.03 9.17 10.72 11.75

45.58 49.28 55.93 68.00 149.06 197.85 225.93 264.12 289.50

nr nr nr nr nr nr nr nr nr

293.66 308.57 355.58 447.04 691.64 822.18 1415.13 2093.94 2459.79

Cast iron gate valve; bronze trim; non rising stem; BS 5150, PN10; working pressure up to 8.4 bar for saturated steam, 10 bar from -10°C to 120°C; BS4504 flanged ends; bolted connections 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia 350mm dia

226.01 280.87 312.70 416.26 581.99 686.64 1261.56 1897.29 2135.01 2483.25

260.21 323.37 360.02 479.25 670.06 790.55 1452.47 2184.40 2458.09 2859.03

1.85 2.00 2.27 2.76 6.05 8.03 9.17 10.72 11.75 12.67

45.58 49.28 55.93 68.00 149.06 197.85 225.93 264.12 289.50 312.17

nr nr nr nr nr nr nr nr nr nr

305.79 372.65 415.95 547.25 819.12 988.39 1678.40 2448.52 2747.59 3171.20

Cast iron gate valve; bronze trim; non rising stem; BS 5163 series A, PN16; working pressure for cold water services up to 16 bar; BS4504 flanged ends; bolted connections 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

226.01 280.87 312.70 416.26 581.99 686.64

260.21 323.37 360.02 479.25 670.06 790.55

1.85 2.00 2.27 2.76 6.05 8.03

45.58 49.28 55.93 68.00 149.06 197.85

nr nr nr nr nr nr

305.79 372.65 415.95 547.25 819.12 988.39

300.38 378.51 612.28 633.05 1170.14

345.83 435.79 704.93 728.85 1347.21

1.54 1.64 1.92 2.80 12.05

37.94 40.41 47.31 68.99 296.89

nr nr nr nr nr

383.78 476.19 752.24 797.83 1644.10

Ball valves Malleable iron body; lever operated stainless steel ball and stem; working pressure up to 12 bar; flanged ends to BS 4504 16/11; bolted connections 40mm dia 50mm dia 80mm dia 100mm dia 150mm dia

298

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd VALVES – cont'd Ball valves – cont'd Malleable iron body; lever operated stainless steel ball and stem; working pressure up to 16 bar; screwed ends to steel 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

35.68 36.69 50.54 50.54 60.44

41.08 42.24 58.19 58.19 69.59

1.34 1.40 1.46 1.54 1.64

33.03 34.51 36.02 37.96 40.46

nr nr nr nr nr

74.11 76.75 94.21 96.15 110.04

Carbon steel body; lever operated stainless steel ball and stem; Class 150; working pressure up to 19 bar; screwed ends to steel 15mm dia 20mm dia 25mm dia

66.01 74.20 80.34

76.00 85.43 92.50

0.84 1.14 1.30

20.70 28.10 32.04

nr nr nr

96.70 113.52 124.54

Bronze; rising stem; renewable disc; BS 5154 series B, PN32; working pressure up to 14 bar for saturated steam, 32 bar from -10°C to 100° C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

36.35 49.70 71.30 100.39 139.80 214.58

41.85 57.22 82.09 115.58 160.96 247.05

0.77 1.03 1.19 1.38 1.62 1.61

18.97 25.38 29.32 34.00 39.91 39.67

nr nr nr nr nr nr

60.82 82.60 111.41 149.58 200.87 286.72

Bronze; needle valve; rising stem; BS 5154, series B, PN32; working pressure up to 14 bar for saturated steam, 32 bar from -10°C to 100° C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

27.63 46.77 65.95 137.28 216.28 273.93

31.81 53.85 75.93 158.05 249.01 315.38

1.07 1.18 1.27 1.35 1.47 1.61

26.36 29.07 31.29 33.26 36.22 39.67

nr nr nr nr nr nr

58.17 82.92 107.22 191.32 285.23 355.05

Bronze; rising stem; renewable disc; BS 5154, series B, PN16; working pressure up to 7 bar for saturated steam, 16 bar from -10°C to 100°C; BS4504 flanged ends; bolted connections 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

73.44 84.94 148.95 188.03 213.73 306.65

84.55 97.79 171.49 216.48 246.07 353.05

1.16 1.26 1.38 1.47 1.56 1.71

28.58 31.04 34.00 36.22 38.44 42.13

nr nr nr nr nr nr

113.13 128.84 205.49 252.70 284.51 395.19

Globe valves

Material Costs/Prices for Measured Works – Mechanical Installations

299

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Bronze; rising stem; renewable disc; BS 2060, class 250; working pressure up to 24 bar for saturated steam, 38 bar from -10°C to 100°C; flanged ends (BS 10 table H); bolted connections 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

187.02 217.35 298.68 390.18 467.24 726.54 868.88 1104.12

215.32 250.24 343.88 449.22 537.95 836.48 1000.36 1271.20

1.16 1.26 1.38 1.47 1.56 1.71 1.88 2.03

28.58 31.04 34.00 36.22 38.44 42.13 46.32 50.02

nr nr nr nr nr nr nr nr

243.90 281.28 377.88 485.44 576.38 878.62 1046.68 1321.22

Bronze; swing pattern; BS 5154 series B, PN 25; working pressure up to 10.5 bar for saturated steam, 25 bar from -10°C to 100°C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia

16.73 19.87 27.55 46.67 58.07 89.05 185.49 262.28

19.26 22.88 31.72 53.73 66.86 102.53 213.56 301.97

0.77 1.03 1.19 1.38 1.62 1.94 2.45 2.83

18.97 25.38 29.32 34.00 39.91 47.80 60.36 69.73

nr nr nr nr nr nr nr nr

38.23 48.26 61.04 87.73 106.78 150.33 273.92 371.70

Bronze; vertical lift pattern; BS 5154 series B, PN32; working pressure up to 14 bar for saturated steam, 32 bar from -10°C to 100°C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia

21.23 30.19 44.33 67.52 87.98 131.84 404.99 605.46

24.44 34.76 51.04 77.74 101.29 151.79 466.28 697.08

0.96 1.07 1.17 1.33 1.41 1.55 1.80 1.99

23.65 26.36 28.83 32.77 34.74 38.19 44.35 49.03

nr nr nr nr nr nr nr nr

48.10 61.12 79.87 110.51 136.03 189.98 510.62 746.11

Bronze; oblique swing pattern; BS 5154 series A, PN32; working pressure up to 14 bar for saturated steam, 32 bar from -10°C to 120°C; screwed connections to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

26.96 32.04 44.41 66.41 85.60 141.80

31.04 36.89 51.13 76.46 98.55 163.26

0.96 1.07 1.17 1.33 1.41 1.55

23.65 26.36 28.83 32.77 34.74 38.19

nr nr nr nr nr nr

54.69 63.25 79.96 109.23 133.29 201.45

Check valves

300

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd VALVES – cont'd Check valves – cont'd Cast iron; swing pattern; BS 5153 PN6; working pressure up to 6 bar from -10°C to 120°C; BS 4504 flanged ends; bolted connections 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

470.70 515.37 580.09 743.11 1108.62 1246.50 2756.62 3445.68 4134.83

541.93 593.36 667.87 855.56 1276.38 1435.13 3173.77 3967.10 4760.53

1.86 2.00 2.56 2.76 6.05 8.11 9.26 10.72 11.75

45.83 49.28 63.07 68.00 149.06 199.82 228.15 264.12 289.50

nr nr nr nr nr nr nr nr nr

587.76 642.64 730.95 923.56 1425.44 1634.94 3401.92 4231.22 5050.03

Cast iron; horizontal lift pattern; BS 5153 PN16; working pressure up to 13 bar for saturated steam, 16 bar from -10°C to 120°C; BS 4504 flanged ends; bolted connections 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia

425.06 425.06 526.26 612.85 914.35 1028.01

489.38 489.38 605.90 705.59 1052.71 1183.57

1.86 2.00 2.56 2.96 7.76 10.50

45.83 49.28 63.07 72.93 191.19 258.70

nr nr nr nr nr nr

535.21 538.66 668.97 778.52 1243.91 1442.28

Cast iron; semi lugged butterfly valve; BS5155 PN16; working pressure 16 bar from -10°C to 120°C; BS 4504 flanged ends; bolted connections 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

136.46 140.83 165.89 230.62 336.59 386.35 616.73 910.28 1365.44

157.11 162.14 190.99 265.52 387.52 444.81 710.06 1048.03 1572.07

2.20 2.31 2.88 3.11 5.02 6.98 8.25 10.47 11.48

54.20 56.91 70.96 76.63 123.68 171.98 203.27 257.96 282.85

nr nr nr nr nr nr nr nr nr

211.31 219.06 261.95 342.14 511.21 616.79 913.32 1305.99 1854.91

71.21 114.42 136.06 182.43 264.56 399.26

81.98 131.73 156.65 210.03 304.60 459.68

1.08 1.46 1.68 1.95 2.27 2.73

26.61 35.97 41.39 48.04 55.93 67.26

nr nr nr nr nr nr

108.59 167.70 198.05 258.08 360.52 526.94

Commissioning valves Bronze commissioning set; metering station; double regulating valve; BS5154 PN20 Series B; working pressure 20 bar from -10°C to 100° C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

Material Costs/Prices for Measured Works – Mechanical Installations

301

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Cast iron commissioning set; metering station; double regulating valve; BS5152 PN16; working pressure 16 bar from -10°C to 90°C; flanged ends (BS 4504, Part 1, Table 16); bolted connections 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

604.88 724.28 1008.31 1476.93 1945.57 4979.89 6229.77 6765.67

696.41 833.88 1160.89 1700.42 2239.99 5733.47 7172.49 7789.48

1.80 2.56 2.30 2.44 2.90 8.26 10.49 11.49

44.35 63.07 56.67 60.12 71.45 203.51 258.46 283.10

nr nr nr nr nr nr nr nr

740.76 896.95 1217.56 1760.54 2311.44 5936.98 7430.95 8072.57

Cast iron variable orifice double regulating valve; orifice valve; BS5152 PN16; working pressure 16 bar from -10° to 90°C; flanged ends (BS 4504, Part 1, Table 16); bolted connections 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

442.86 542.06 743.89 1113.97 1430.87 3750.14 5702.07 10228.37

509.88 624.08 856.46 1282.54 1647.39 4317.63 6564.94 11776.18

2.00 2.56 2.96 7.76 10.50 8.26 10.49 11.49

49.28 63.07 72.93 191.19 258.70 203.51 258.46 283.10

nr nr nr nr nr nr nr nr

559.15 687.16 929.39 1473.73 1906.10 4521.14 6823.39 12059.27

Cast iron globe valve with double regulating feature; BS5152 PN16; working pressure 16 bar from -10°C to 120°C; flanged ends (BS 4504, Part 1, Table 16); bolted connections 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

527.56 637.99 840.42 1171.77 1483.03 3839.45 5809.00 9126.77

607.40 734.53 967.59 1349.08 1707.45 4420.46 6688.05 10507.88

2.00 2.56 2.96 7.76 10.50 8.26 10.49 11.49

49.28 63.07 72.93 191.19 258.70 203.51 258.46 283.10

nr nr nr nr nr nr nr nr

656.67 797.61 1040.52 1540.28 1966.16 4623.97 6946.50 10790.97

Bronze autoflow commissioning valve; PN25 ; working pressure 25 bar up to 100°C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

80.74 85.50 106.49 166.26 182.06 269.18

92.96 98.44 122.60 191.42 209.62 309.91

0.82 1.08 1.27 1.50 1.76 2.13

20.20 26.61 31.29 36.96 43.36 52.48

nr nr nr nr nr nr

113.16 125.05 153.89 228.37 252.98 362.39

Ductile iron autoflow commissioning valves; PN16; working pressure 16 bar from -10°C to 120°C; for ANSI 150 flanged ends 65mm dia 80mm dia 100mm dia 150mm dia 200mm dia 250mm dia 300mm dia

708.87 783.75 1001.21 2062.50 3004.23 4172.43 5328.84

816.14 902.35 1152.71 2374.61 3458.84 4803.82 6135.22

2.31 2.88 3.11 6.98 8.26 10.49 11.49

56.91 70.96 76.63 171.98 203.51 258.46 283.10

nr nr nr nr nr nr nr

873.06 973.30 1229.34 2546.58 3662.36 5062.28 6418.32

302

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd VALVES – cont'd Strainers Bronze strainer; Y type; PN32 ; working pressure 32 bar from -10°C to 100°C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

32.36 41.11 54.53 88.07 113.91 190.79

37.26 47.33 62.78 101.40 131.15 219.66

0.82 1.08 1.27 1.50 1.76 2.13

20.20 26.61 31.29 36.96 43.36 52.48

nr nr nr nr nr nr

57.46 73.94 94.07 138.35 174.51 272.14

Cast iron strainer; Y type; PN16; working pressure 16 bar from -10°C to 120°C; BS 4504 flanged ends 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia

201.29 238.26 348.60 642.64 824.51 1383.90 2001.20 3258.92

231.75 274.31 401.35 739.89 949.28 1593.32 2304.03 3752.08

2.31 2.88 3.11 5.02 6.98 8.26 10.49 11.49

56.91 70.96 76.63 123.68 171.98 203.51 258.46 283.10

nr nr nr nr nr nr nr nr

288.66 345.27 477.98 863.57 1121.26 1796.83 2562.49 4035.17

Gunmetal; self-acting two port thermostatic regulator; single seat; screwed ends; complete with sensing element, 2m long capillary tube 15mm dia 20mm dia 25mm dia

564.48 582.63 597.93

649.90 670.80 688.41

1.37 1.24 1.34

33.75 30.55 33.02

nr nr nr

683.65 701.35 721.43

Gunmetal; self-acting two port thermostatic regulator; double seat; flanged ends (BS 4504 PN25); with sensing element, 2m long capillary tube; steel body 65mm dia 80mm dia

2093.40 2470.80

2410.18 2844.69

1.23 1.62

35.53 46.79

nr nr

2445.71 2891.48

Regulators

Material Costs/Prices for Measured Works – Mechanical Installations

303

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Control valves; electrically operated (electrical work elsewhere) Cast iron; butterfly type; two position electrically controlled 240V motor and linkage mechanism; for low pressure hot water; maximum pressure 6 bar at 120°C; flanged ends 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia

701.69 725.04 1013.12 1041.92 1068.01 1109.77 1164.61 1289.95 1397.87 1733.83

807.87 834.76 1166.43 1199.59 1229.63 1277.71 1340.84 1485.15 1609.40 1996.20

1.47 1.52 1.61 1.71 2.51 2.69 2.81 2.94 3.33 3.67

36.22 37.45 39.67 42.13 61.84 66.28 69.23 72.44 82.05 90.42

nr nr nr nr nr nr nr nr nr nr

844.09 872.21 1206.10 1241.72 1291.47 1343.98 1410.08 1557.59 1691.45 2086.62

Cast iron; three way 240V motorized; for low pressure hot water; maximum pressure 6 bar 120°C; flanged ends, drilled (BS 10, Table F) 25mm dia 40mm dia 50mm dia 65mm dia 80mm dia

784.24 822.55 812.10 907.38 1016.73

902.92 947.02 934.99 1044.69 1170.59

1.99 2.13 3.21 3.23 3.50

49.03 52.48 79.09 79.58 86.23

nr nr nr nr nr

951.95 999.50 1014.08 1124.27 1256.82

Two port normally closed motorised valve; electric actuator; spring return; domestic usage 22mm dia 28mm dia

111.19 150.71

128.02 173.52

1.18 1.35

29.07 33.26

nr nr

157.09 206.78

Two port on/off motorised valve; electric actuator; spring return; domestic usage 22mm dia

111.19

128.02

1.18

29.07

nr

157.09

Three port motorised valve; electric actuator; spring return; domestic usage 22mm dia

162.24

186.79

1.18

29.07

nr

215.86

Bronze relief valve; spring type; side outlet; working pressure up to 20.7 bar at 120°C; screwed ends to steel 15mm dia 20mm dia

124.00 136.00

142.76 156.58

0.26 0.36

6.41 8.87

nr nr

149.17 165.45

Bronze relief valve; spring type; side outlet; working pressure up to 17.2 bar at 120°C; screwed ends to steel 25mm dia 32mm dia

186.00 252.00

214.15 290.13

0.38 0.48

9.36 11.83

nr nr

223.51 301.96

Safety and relief valves

304

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd VALVES – cont'd Safety and relief valves – cont'd Bronze relief valve; spring type; side outlet; working pressure up to 13.8 bar at 120°C; screwed ends to steel 40mm dia 50mm dia 65mm dia 80mm dia

329.00 429.00 794.30 1042.11

378.79 493.92 914.50 1199.81

0.64 0.76 0.94 1.10

15.77 18.73 23.16 27.10

nr nr nr nr

394.55 512.64 937.66 1226.91

Bronze gland cock; complete with malleable iron lever; working pressure up to 10 bar at 100°C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia

43.57 61.99 83.54 126.23 176.25 269.00

50.16 71.37 96.18 145.33 202.92 309.71

0.77 1.03 1.19 1.38 1.62 1.94

18.97 25.38 29.32 34.00 39.91 47.80

nr nr nr nr nr nr

69.13 96.75 125.50 179.33 242.84 357.50

Bronze three-way plug cock; complete with malleable iron lever; working pressure up to 10 bar at 100°C; screwed ends to steel 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia

88.34 102.25 142.94 202.73 244.43

101.71 117.72 164.57 233.41 281.42

0.77 1.03 1.19 1.38 1.62

18.97 25.38 29.32 34.00 39.91

nr nr nr nr nr

120.68 143.10 193.89 267.41 321.33

Automatic air vent; maximum pressure up to 7 bar at 93°C; screwed ends to steel 15mm dia

11.12

12.80

0.80

19.71

nr

32.51

Automatic air vent; maximum pressure up to 7 bar at 93°C; lockhead isolating valve; screwed ends to steel 15mm dia

11.12

12.80

0.83

20.45

nr

33.25

399.90

460.41

0.83

20.45

nr

480.86

Cocks; screwed joints to steel

Air vents; including regulating, adjusting and testing

Automatic air vent; maximum pressure up to 17 bar at 200°C; flanged ends (BS10, Table H); bolted connections to counter flange (measured separately) 15mm dia

Material Costs/Prices for Measured Works – Mechanical Installations

305

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Radiator valves Bronze; wheelhead or lockshield; chromium plated finish; screwed joints to steel Straight 15mm dia 20mm dia 25mm dia

14.19 22.08 27.72

16.34 25.42 31.91

0.59 0.73 0.85

14.54 17.99 20.94

nr nr nr

30.87 43.41 52.86

Angled 15mm dia 20mm dia 25mm dia

48.01 63.30 81.38

55.28 72.88 93.69

0.59 0.73 0.85

14.54 17.99 20.94

nr nr nr

69.81 90.86 114.64

Straight 15mm dia 20mm dia 25mm dia

25.41 32.02 40.24

29.26 36.87 46.33

0.59 0.73 0.85

14.54 17.99 20.94

nr nr nr

43.79 54.85 67.27

Angled 15mm dia 20mm dia 25mm dia

19.18 20.12 24.94

22.08 23.16 28.71

0.59 0.73 0.85

14.54 17.99 20.94

nr nr nr

36.62 41.15 49.66

Twin entry 8mm dia 10mm dia

26.39 29.95

30.69 34.83

0.23 0.23

5.67 5.67

nr nr

36.35 40.49

Straight 15mm dia 20mm dia

10.50 15.41

12.09 17.74

0.59 0.73

14.54 17.99

nr nr

26.63 35.73

Angled 15mm dia 20mm dia

9.78 14.33

11.26 16.50

0.59 0.73

14.54 17.99

nr nr

25.80 34.48

Back/bottom entry 100mm dia face 150mm dia face

53.48 87.61

61.57 100.87

0.81 0.81

19.97 19.97

nr nr

81.54 120.83

Dial pressure/altitude gauge; bronze bourdon tube type; coated steel case and dial; glass window BS 1780; screwed end 100mm dia face 150mm dia face

79.27 88.78

91.27 102.21

0.81 0.81

19.97 19.97

nr nr

111.23 122.18

Bronze; wheelhead or lockshield; chromium plated finish; compression joints to copper

Bronze; thermostatic head; chromium plated finish; compression joints to copper

GAUGES Thermometers and pressure gauges Dial thermometer; coated steel case and dial; glass window; brass pocket; BS 5235; pocket length 100mm; screwed end

306

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd EQUIPMENT PRESSURISATION UNITS LTHW pressurisation unit complete with expansion vessel(s), interconnecting pipework and all necessary isolating and drain valves; includes placing in position; electrical work elsewhere. Selection based on a final working pressure of 4 bar, a 3m static head and system operating temperatures of 82/71°C System volume 2,400 litres 6,000–20,000 litres 25,000 litres

1967.96 2157.73 2678.96

2265.76 2484.25 3084.35

15.00 22.00 22.00

369.58 542.04 542.04

nr nr nr

2635.34 3026.29 3626.40

Dirt seperator; maximum operating temperature and pressure of 110°C and 10 bar; fitted with drain valve Bore size, flow rate (at 1.0m/s velocity); threaded connections 32mm dia, 3.7m3/h 40mm dia, 5.0m3/h

74.97 89.25

86.31 102.76

2.29 2.45

56.42 60.36

nr nr

142.74 163.12

Bore size, flow rate (at 1.5m/s velocity); flanged connections to PN16 50mm dia, 13.0m3/h 65mm dia, 21.0m3/h 80mm dia, 29.0m3/h 100mm dia, 49.0m3/h 125mm dia, 74.0m3/h 150mm dia, 109.0m3/h 200mm dia, 181.0m3/h 250mm dia, 288.0m3/h 300mm dia, 407.0m3/h

504.56 525.98 740.18 783.02 1500.59 1564.85 2358.58 4180.47 6110.65

580.91 605.57 852.19 901.51 1727.67 1801.65 2715.49 4813.08 7035.34

3.00 3.00 3.84 4.44 11.64 15.75 15.75 15.75 17.24

73.92 73.92 94.61 109.39 286.79 388.05 388.05 388.05 424.77

nr nr nr nr nr nr nr nr nr

654.83 679.49 946.80 1010.90 2014.46 2189.71 3103.55 5201.13 7460.11

69.02 82.11

79.46 94.54

2.29 2.45

56.42 60.36

nr nr

135.89 154.90

DIRT SEPARATORS

MICROBUBBLE DEAERATORS Microbubble deaerator; maximum operating temperature and pressure of 110°C and 10 bar; fitted with drain valve Bore size, flow rate (at 1.0m/s velocity); threaded connections 32mm dia, 3.7m3/h 40mm dia, 5.0m3/h

Material Costs/Prices for Measured Works – Mechanical Installations

307

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Bore size, flow rate (at 1.5m/s velocity); flanged connections to PN16 50mm dia, 13.0m3/h 65mm dia, 21.0m3/h 80mm dia, 29.0m3/h 100mm dia, 49.0m3/h 125mm dia, 74.0m3/h 150mm dia, 109.0m3/h 200mm dia, 181.0m3/h 250mm dia, 288.0m3/h 300mm dia, 407.0m3/h

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

504.56 524.98 740.18 783.02 1500.59 1564.85 2358.58 4180.47 6132.07

580.91 604.42 852.19 901.51 1727.67 1801.65 2715.49 4813.08 7060.01

3.00 3.00 3.84 4.44 11.64 15.75 15.75 15.75 17.24

73.92 73.92 94.61 109.39 286.79 388.05 388.05 388.05 424.77

nr nr nr nr nr nr nr nr nr

654.83 678.34 946.80 1010.90 2014.46 2189.71 3103.55 5201.13 7484.77

Combined deaerator and dirt separators; maximum operating temperature and pressure of 110°C and 10 bar; fitted with drain valve Bore size, flow rate (at 1.5m/s velocity); threaded connections 25mm dia, 2.0m3/h

95.20

109.61

2.75

67.76

nr

177.36

Bore size, flow rate (at 1.5m/s velocity); flanged connections to PN16 50mm dia, 13.0m3/h 65mm dia, 21.0m3/h 80mm dia, 29.0m3/h 100mm dia, 49.0m3/h 125mm dia, 74.0m3/h 150mm dia, 109.0m3/h 200mm dia, 181.0m3/h 250mm dia, 288.0m3/h 300mm dia, 407.0m3/h

643.79 665.21 900.83 943.67 1800.47 1865.92 2894.08 5102.72 7825.44

741.21 765.87 1037.15 1086.47 2072.93 2148.28 3332.03 5874.89 9009.62

3.60 3.60 4.61 5.33 13.97 18.90 18.90 18.90 20.69

88.70 88.70 113.58 131.32 344.20 465.67 465.67 465.67 509.77

nr nr nr nr nr nr nr nr nr

829.91 854.57 1150.73 1217.79 2417.12 2613.95 3797.69 6340.55 9519.39

1204.91

1387.24

7.59

187.01

nr

1574.25

1507.93

1736.12

8.09

199.32

nr

1935.44

1555.09

1790.41

8.67

213.61

nr

2004.03

2702.83

3111.84

11.20

275.95

nr

3387.79

1766.64

2033.98

11.70

288.27

nr

2322.25

1549.38

1783.84

11.70

288.27

nr

2072.11

1718.04

1978.02

11.70

288.27

nr

2266.29

COMBINED MICROBUBBLE DEAERATORS AND DIRT SEPARATORS

Y20 – PUMPS Centrifugal heating and chilled water pump; belt drive; 3 phase, 1450 rpm motor; max. pressure 1000kN/m2; max. temperature 125° C; bed plate; coupling guard; bolted connections; supply only mating flanges; includes fixing on prepared concrete base; electrical work elsewhere 40mm pump size; 4.0 l/s at 70 kPa max head; 0.25kW max motor rating 40mm pump size; 4.0 l/s at 130 kPa max head; 1.5kW max motor rating 50mm pump size; 8.5 l/s at 90 kPa max head; 2.2kW max motor rating 50mm pump size; 8.5 l/s at 190 kPa max head; 3kW max motor rating 50mm pump size; 8.5 l/s at 215 kPa max head; 4 kW max motor rating 65mm pump size; 14.0 l/s at 90 kPa max head; 3kW max motor rating 65mm pump size; 14.0 l/s at 160 kPa max head; 4 kW max motor rating

308

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PUMPS – cont'd Centrifugal heating and chilled water pump; belt drive; 3 phase, 1450 rpm motor – cont'd 80mm pump size; 14.5 l/s at 210 kPa max head; 5.5 kW max motor rating 80mm pump size; 22.0 l/s at 130 kPa max head; 5.5 kW max motor rating 80mm pump size; 22.0 l/s at 200 kPa max head; 7.5 kW max motor rating 100mm pump size; 22.0 l/s at 250 kPa max head; 11kW max motor rating 100mm pump size; 30.0 l/s at 100 kPa max head; 4.0 kW max motor rating 100mm pump size; 36.0 l/s at 250 kPa max head; 15.0kW max motor rating 100mm pump size; 36.0 l/s at 550 kPa max head; 30.0 kW max motor rating

2635.66

3034.50

11.70

288.27

nr

3322.77

2635.66

3034.50

13.64

336.07

nr

3370.57

2760.00

3177.66

13.64

336.07

nr

3513.72

3873.44

4459.59

13.64

336.07

nr

4795.66

2168.27

2496.38

19.15

471.83

nr

2968.21

4102.13

4722.88

19.15

471.83

nr

5194.71

5567.17

6409.62

19.15

471.83

nr

6881.45

2581.34

2971.96

7.59

187.01

nr

3158.97

3107.32

3577.54

8.09

199.32

nr

3776.86

3174.51

3654.89

8.67

213.61

nr

3868.51

3659.04

4212.74

11.20

275.95

nr

4488.69

3816.27

4393.77

11.70

288.27

nr

4682.04

3417.49

3934.64

11.70

288.27

nr

4222.91

3816.27

4393.77

11.70

288.27

nr

4682.04

5732.97

6600.51

13.64

336.07

nr

6936.58

Centrifugal heating and chilled water pump; TWIN HEAD BELT DRIVE; 3 phase, 1450 rpm motor; max. pressure 1000kN/m2; max. temperature 125°C; bed plate; coupling guard; bolted connections; supply only mating flanges; includes fixing on prepared concrete base; electrical work elsewhere 40mm pump size; 4.0 l/s at 70 kPa max head; 0.75kW max motor rating 40mm pump size; 4.0 l/s at 130 kPa max head; 1.5kW max motor rating 50mm pump size; 8.5 l/s at 90 kPa max head; 2.2kW max motor rating 50mm pump size; 8.5 l/s at 190 kPa max head; 4kW max motor rating 65mm pump size; 8.5 l/s at 215 kPa max head; 4 kW max motor rating 65mm pump size; 14.0 l/s at 90 kPa max head; 3kW max motor rating 65mm pump size; 14.0 l/s at 160 kPa max head; 4 kW max motor rating 80mm pump size; 14.5 l/s at 210 kPa max head; 7.5 kW max motor rating

Material Costs/Prices for Measured Works – Mechanical Installations

309

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Centrifugal heating and chilled water pump; CLOSE COUPLED; 3 phase, 1450 rpm motor; max. pressure 1000kN/m2; max. temperature 110°C; bed plate; coupling guard; bolted connections; supply only mating flanges; includes fixing on prepared concrete base; electrical work elsewhere 40mm pump size; 4.0 l/s at 23 kPa max head; 0.55kW max motor rating 50mm pump size; 4.0 l/s at 75 kPa max head; 0.75 kW max motor rating 50mm pump size; 7.0 l/s at 65 kPa max head; 0.75 kW max motor rating 65mm pump size; 10.0 l/s at 33 kPa max head; 0.75kW max motor rating 50mm pump size; 4.0 l/s at 120 kPa max head; 1.5 kW max motor rating 80mm pump size; 16.0 l/s at 80 kPa max head; 2.2 kW max motor rating 80mm pump size; 16.0 l/s at 120 kPa max head; 4.0 kW max motor rating 100mm pump size; 28.0 l/s at 40 kPa max head; 2.2 kW max motor rating 100mm pump size; 28.0 l/s at 90 kPa max head; 4.0 kW max motor rating 125mm pump size; 40.0 l/s at 50 kPa max head; 3.0 kW max motor rating 125mm pump size; 40.0 l/s at 120 kPa max head; 7.5 kW max motor rating 150mm pump size; 70.0 l/s at 75 kPa max head; 11 kW max motor rating 150mm pump size; 70.0 l/s at 120 kPa max head; 15.0 kW max motor rating 150mm pump size; 70.0 l/s at 150 kPa max head; 15.0 kW max motor rating

724.66

834.32

7.31

180.11

nr

1014.43

803.28

924.84

7.31

180.11

nr

1104.94

803.28

924.84

8.01

197.35

nr

1122.19

910.48

1048.26

8.01

197.35

nr

1245.61

1096.28

1262.17

8.01

197.35

nr

1459.53

1419.31

1634.09

12.35

304.28

nr

1938.37

1383.57

1592.94

12.35

304.28

nr

1897.22

1402.16

1614.34

17.86

440.04

nr

2054.38

1547.94

1782.18

17.86

440.04

nr

2222.22

1476.48

1699.91

25.85

636.90

nr

2336.81

1822.37

2098.14

25.85

636.90

nr

2735.04

2678.53

3083.86

30.43

749.75

nr

3833.61

2862.91

3296.14

30.43

749.75

nr

4045.89

2862.91

3296.14

30.43

749.75

nr

4045.89

1307.82

1505.73

7.31

180.11

nr

1685.83

1443.61

1662.06

7.31

180.11

nr

1842.17

1770.92

2038.90

8.01

197.35

nr

2236.26

1770.92

2038.90

8.01

197.35

nr

2236.26

1770.92

2038.90

8.01

197.35

nr

2236.26

2308.34

2657.65

12.35

304.28

nr

2961.93

Centrifugal heating & chilled water pump; close coupled; 3 phase, VARIABLE SPEED motor; max. system pressure 1000 kN/m2; max. temperature 110°C; bed plate; coupling guard; bolted connections; supply only mating flanges; includes fixing on prepared concrete base; electrical work elsewhere. 40mm pump size; 4.0 l/s at 23 kPa max head; 0.55kW max motor rating 40mm pump size; 4.0 l/s at 75 kPa max head; 0.75kW max motor rating 50mm pump size; 7.0 l/s at 65 kPa max head; 1.5kW max motor rating 50mm pump size; 10.0 l/s at 33 kPa max head; 1.5kW max motor rating 50mm pump size; 4.0 l/s at 120 kPa max head; 1.5kW max motor rating 80mm pump size; 16.0 l/s at 80 kPa max head; 2.2kW max motor rating

310

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PUMPS – cont'd Centrifugal heating & chilled water pump; close coupled; 3 phase, VARIABLE SPEED motor – cont'd 80mm pump size; 16.0 l/s at 120 kPa max head; 3.0kW max motor rating 100mm pump size; 28.0 l/s at 40 kPa max head; 2.2kW max motor rating 100mm pump size; 28.0 l/s at 90 kPa max head; 4.0.kW max motor rating 125mm pump size; 40.0 l/s at 50 kPa max head; 3.0kW max motor rating 125mm pump size; 40.0 l/s at 120 kPa max head; 7.5kW max motor rating 150mm pump size; 70.0 l/s at 75 kPa max head; 7.5kW max motor rating

2489.87

2866.65

12.35

304.28

nr

3170.93

2365.51

2723.47

17.86

440.04

nr

3163.51

2821.47

3248.43

17.86

440.04

nr

3688.47

2708.55

3118.42

25.85

636.90

nr

3755.32

3811.97

4388.82

25.85

636.90

nr

5025.72

4406.57

5073.39

30.43

749.75

nr

5823.14

130.36 192.10

150.09 221.17

1.58 1.58

38.93 38.93

nr nr

189.02 260.10

252.99

291.27

1.58

38.93

nr

330.20

Glandless domestic heating pump; for low pressure domestic hot water heating systems; 240 volt; 50Hz electric motor; max working pressure 1000N/m2 and max temperature of 130°C; includes fixing in position; electrical work elsewhere 1" BSP unions – 2 speed 1.25" BSP unions – 3 speed Glandless pumps; for hot water secondary supply; silent running; 3 phase; max pressure 1000kN/m2; max temperature 130° C; bolted connections; supply only mating flanges; including fixing in position; electrical elsewhere 1" BSP unions – 3 speed

Material Costs/Prices for Measured Works – Mechanical Installations

311

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Pipeline mounted circulator; for heating and chilled water; silent running; 3 phase; 1450 rpm motor; max pressure 1000 kN/m2; max temperature 120°C; bolted connections; supply only mating flanges; includes fixing in position; electrical elsewhere 32mm pump size; 2.0 l/s at 17 kPa max head; 0.2kW max motor rating 50mm pump size; 3.0 l/s at 20 kPa max head; 0.2kW max motor rating 65mm pump size; 5.0 l/s at 30 kPa max head; 0.37 kW max motor rating 65mm pump size; 8.0 l/s at 37 kPa max head; 0.75 kW max motor rating 80mm pump size; 12.0 l/s at 42 kPa max head; 1.1 kW max motor rating 100mm pump size; 25.0 l/s at 37 kPa max head; 2.2 kW max motor rating

505.98

582.55

6.44

158.67

nr

741.22

503.12

579.25

6.86

169.02

nr

748.27

800.42

921.54

7.48

184.30

nr

1105.84

896.18

1031.79

7.48

184.30

nr

1216.09

1041.97

1199.65

8.01

197.35

nr

1397.00

1485.06

1709.79

9.11

224.46

nr

1934.24

933.35

1074.59

7.88

194.15

nr

1268.74

936.20

1077.87

8.01

197.35

nr

1275.22

1519.36

1749.28

9.20

226.67

nr

1975.95

1756.63

2022.45

9.20

226.67

nr

2249.13

1986.75

2287.39

9.45

232.83

nr

2520.23

413.44

476.00

6.94

170.99

nr

646.99

440.61

507.29

7.35

181.09

nr

688.38

868.22

999.60

7.76

191.19

nr

1190.80

Dual pipeline mounted circulator; for heating & chilled water; silent running; 3 phase; 1450 rpm motor; max pressure 1000 kN/m2; max temperature 120°C; bolted connections; supply only mating flanges; includes fixing in position; electrical work elsewhere 40mm pump size; 2.0 l/s at 17 kPa max head; 0.8kW max motor rating 50mm pump size; 3.0 l/s at 20 kPa max head; 0.2 kW max motor rating 65mm pump size; 5.0 l/s at 30 kPa max head; 0.37 kW max motor rating 65mm pump size; 8.0 l/s at 37 kPa max head; 0.75 kW max motor rating 100mm pump size; 12.0 l/s at 42 kPa max head; 1.1 kW max motor rating Glandless accelerator pumps; for low and medium pressure heating services; silent running; 3 phase; 1450 rpm motor; max pressure 1000 kN/m2; max temperature 130° C; bolted connections; supply only mating flanges; includes fixing in position; electrical work elsewhere 40mm pump size; 4.0 l/s at 15 kPa max head; 0.35kW max motor rating 50mm pump size; 6.0 l/s at 20 kPa max head; 0.45kW max motor rating 80mm pump size; 13.0 l/s at 28 kPa max head; 0.58kW max motor rating

312

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd Y22 – HEAT EXCHANGERS Plate heat exchanger; for use in LTHW systems; painted carbon steel frame; stainless steel plates, nitrile rubber gaskets; design pressure of 10 bar and operating temperature of 110/135°C Primary side; 80°C in, 69°C out; secondary side; 82°C in, 71°C out 107 KW, 2.38 l/s 245 kW, 5.46 l/s 287 kW, 6.38 l/s 328 kW, 7.31 l/s 364 kW, 8.11 l/s 403 kW, 8.96 l/s 453 kW, 10.09 l/s 490 kW, 10.89 l/s 1000 kW, 21.7 l/s 1500 kW, 32.6 l/s 2000 kW, 43.4 l/s 2500 kW, 54.3 l/s

1910.00 2935.00 3258.00 3555.00 4219.00 4429.00 4608.00 4777.00 3554.00 4528.00 5432.00 6677.00

2199.03 3379.14 3751.02 4092.96 4857.44 5099.22 5305.31 5499.88 4091.81 5213.20 6254.00 7687.40

10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 12.00 12.00 15.00 15.00

246.38 246.38 246.38 246.38 246.38 246.38 246.38 246.38 295.66 295.66 369.58 369.58

nr nr nr nr nr nr nr nr nr nr nr nr

2445.41 3625.52 3997.40 4339.34 5103.82 5345.60 5551.69 5746.26 4387.47 5508.86 6623.57 8056.97

793.98 925.00 1060.00 1470.00 2190.00 3050.00 4900.00 8918.65

914.13 1064.98 1220.40 1692.45 2521.40 3511.54 5641.49 10268.26

3.00 5.00 7.04 9.01 22.22 28.57 50.00 60.00

73.92 123.19 173.51 221.97 547.52 703.95 1231.92 1478.30

nr nr nr nr nr nr nr nr

988.04 1188.17 1393.92 1914.42 3068.92 4215.49 6873.41 11746.57

Note: For temperature conditions different to those above, the cost of the units can vary significantly, and so manufacturers advice should be sought. Y23 – CALORIFIERS Non-storage calorifiers; mild steel; heater battery duty 116°C/90°C to BS 853, maximum test on shell 11.55 bar, tubes 26.25 bar Horizontal or vertical; primary water at 116°C on, 90°C off 40 kW capacity 88 kW capacity 176 kW capacity 293 kW capacity 586 kW capacity 879 kW capacity 1465 kW capacity 2000 kW capacity

Material Costs/Prices for Measured Works – Mechanical Installations

313

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

HEAT EMITTERS Perimeter convector heating; metal casing with standard finish; aluminium extruded grille; including backplates Top/sloping/flat front outlet 60 x 200mm 60 x 300mm 60 x 450mm 60 x 525mm 60 x 600mm 90 x 260mm 90 x 300mm 90 x 450mm 90 x 525mm 90 x 600mm

31.85 34.64 42.94 45.71 49.86 34.64 36.01 44.34 48.49 51.26

36.67 39.88 49.44 52.63 57.41 39.88 41.46 51.05 55.83 59.02

2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00

49.28 49.28 49.28 49.28 49.28 49.28 49.28 49.28 49.28 49.28

m m m m m m m m m m

85.95 89.16 98.71 101.90 106.68 89.16 90.74 100.33 105.10 108.29

Extra over for dampers Damper

15.23

17.53

0.25

6.16

nr

23.69

Extra over for fittings 60mm End caps 90mm End caps 60mm Corners 90mm Corners

12.19 19.18 25.91 38.10

14.03 22.08 29.83 43.87

0.25 0.25 0.25 0.25

6.16 6.16 6.16 6.16

nr nr nr nr

20.19 28.24 35.99 50.03

Radiant Strip Heaters Suitable for connection to hot water system; aluminium sheet panels with steel pipe clamped to upper surface; including insulation, sliding brackets, cover plates, end closures; weld or screwed BSP ends One pipe 1500mm 3000mm 4500mm 6000mm

long long long long

64.41 101.88 138.19 190.50

74.16 117.30 159.10 219.33

3.11 3.11 3.11 3.11

76.63 76.63 76.63 76.63

nr nr nr nr

150.78 193.92 235.73 295.95

Two pipe 1500mm 3000mm 4500mm 6000mm

long long long long

120.25 189.94 259.38 349.45

138.45 218.68 298.63 402.33

4.15 4.15 4.15 4.15

102.25 102.25 102.25 102.25

nr nr nr nr

240.70 320.93 400.88 504.58

17.58 35.14 46.04 51.65 57.25 68.51

20.24 40.46 53.01 59.47 65.91 78.88

2.03 2.03 2.03 2.47 2.97 3.22

50.02 50.02 50.02 60.86 73.18 79.34

nr nr nr nr nr nr

70.26 90.47 103.02 120.32 139.09 158.21

Pressed steel panel type radiators; fixed with and including brackets; taking down once for decoration; refixing 300mm high; single panel 500mm length 1000mm length 1500mm length 2000mm length 2500mm length 3000mm length

314

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd HEAT EMITTERS – cont'd Pressed steel panel type radiators; fixed with and including brackets; taking down once for decoration; refixing – cont'd 300mm high; double panel; convector 500mm length 1000mm length 1500mm length 2000mm length 2500mm length 3000mm length

33.80 67.65 101.46 135.29 169.09 202.93

38.91 77.89 116.81 155.76 194.68 233.64

2.13 2.13 2.13 2.57 3.07 3.31

52.48 52.48 52.48 63.32 75.64 81.55

nr nr nr nr nr nr

91.39 130.37 169.29 219.08 270.32 315.19

16.40 32.83 52.52 65.66 78.77 98.47

18.88 37.80 60.47 75.60 90.69 113.37

2.08 2.08 2.53 2.97 3.47 3.82

51.25 51.25 62.34 73.18 85.50 94.12

nr nr nr nr nr nr

70.13 89.05 122.80 148.77 176.19 207.49

450mm high; double panel; convector 500mm length 1000mm length 1600mm length 2000mm length 2400mm length 3000mm length

30.06 60.11 110.09 185.08 222.11 277.63

34.61 69.21 126.75 213.09 255.72 319.64

2.18 2.18 2.63 3.06 3.37 3.92

53.71 53.71 64.80 75.39 83.03 96.58

nr nr nr nr nr nr

88.32 122.92 191.55 288.48 338.75 416.22

600mm high; single panel 500mm length 1000mm length 1600mm length 2000mm length 2400mm length 3000mm length

21.98 43.97 70.34 87.92 105.52 131.90

25.31 50.62 80.98 101.22 121.49 151.86

2.18 2.43 3.13 3.77 4.07 5.11

53.71 59.87 77.12 92.89 100.28 125.90

nr nr nr nr nr nr

79.02 110.50 158.10 194.11 221.77 277.76

600mm high; double panel; convector 500mm length 1000mm length 1600mm length 2000mm length 2400mm length 3000mm length

37.85 75.69 138.64 233.07 279.68 349.59

43.58 87.14 159.62 268.34 322.00 402.49

2.28 2.28 3.23 3.87 4.17 5.24

56.18 56.18 79.58 95.35 102.74 129.11

nr nr nr nr nr nr

99.75 143.32 239.20 363.69 424.74 531.60

700mm high; single panel 500mm length 1000mm length 1600mm length 2000mm length 2400mm length 3000mm length

25.72 51.42 82.28 102.86 123.45 154.28

29.61 59.20 94.73 118.43 142.13 177.63

2.23 2.83 3.73 4.46 4.48 5.24

54.94 69.73 91.90 109.89 110.38 129.11

nr nr nr nr nr nr

84.56 128.93 186.63 228.31 252.51 306.73

450mm high; single panel 500mm length 1000mm length 1600mm length 2000mm length 2400mm length 3000mm length

Material Costs/Prices for Measured Works – Mechanical Installations

315

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

700mm high; double panel; convector 500mm length 1000mm length 1600mm length 2000mm length 2400mm length 3000mm length

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

49.19 132.34 211.73 264.66 317.61 397.00

56.63 152.37 243.77 304.71 365.67 457.08

2.33 3.08 3.83 4.17 4.37 4.82

57.41 75.89 94.37 102.74 107.67 118.76

nr nr nr nr nr nr

114.04 228.25 338.14 407.45 473.34 575.83

147.82 221.92 296.02 370.12 429.40 640.12

170.19 255.50 340.82 426.13 494.38 736.99

2.03 2.03 2.03 2.47 2.97 3.22

50.02 50.02 50.02 60.86 73.18 79.34

nr nr nr nr nr nr

220.20 305.52 390.83 486.99 567.56 816.32

341.24 535.04 728.84 922.64 1077.68 1432.04

392.88 616.00 839.13 1062.26 1240.76 1648.74

2.03 2.03 2.03 2.47 2.97 3.22

50.02 50.02 50.02 60.86 73.18 79.34

nr nr nr nr nr nr

442.89 666.02 889.15 1123.12 1313.94 1728.08

162.07 250.42 338.77 427.12 497.80 725.62

186.60 288.31 390.03 491.75 573.13 835.42

2.13 2.13 2.13 2.57 3.07 3.31

52.48 52.48 52.48 63.32 75.64 81.55

nr nr nr nr nr nr

239.07 340.79 442.51 555.07 648.77 916.98

395.39 643.34 891.29 1139.24 1337.60 1756.94

455.22 740.69 1026.16 1311.64 1540.01 2022.81

2.08 2.08 2.53 2.97 3.47 3.82

51.25 51.25 62.34 73.18 85.50 94.12

nr nr nr nr nr nr

506.47 791.94 1088.50 1384.81 1625.51 2116.93

191.33 299.63 407.93 516.23 602.87 854.63

220.28 344.97 814.63 594.35 694.10 983.96

2.18 2.18 2.63 3.06 3.37 3.92

53.71 53.71 64.80 75.39 83.03 96.58

nr nr nr nr nr nr

273.99 398.68 879.43 669.74 777.13 1080.54

451.06 736.06 1021.06 1306.06 1534.06 1997.86

519.32 847.44 1175.57 1503.70 1766.20 2300.19

2.18 2.43 3.13 3.77 4.07 5.11

53.71 59.87 77.12 92.89 100.28 125.90

nr nr nr nr nr nr

573.03 907.32 1252.69 1596.59 1866.48 2426.09

Flat panel type steel radiators; fixed with and including brackets; taking down once for decoration; refixing 300mm high; single panel (44mm deep) 500mm length 1000mm length 1500mm length 2000mm length 2400mm length 3000mm length 300mm high; double panel (100mm deep) 500mm length 1000mm length 1500mm length 2000mm length 2400mm length 3000mm length 500mm high; single panel (44mm deep) 500mm length 1000mm length 1500mm length 2000mm length 2400mm length 3000mm length 500mm high; double panel (100mm deep) 500mm length 1000mm length 1500mm length 2000mm length 2400mm length 3000mm length 600mm high; single panel (44mm deep) 500mm length 1000mm length 1500mm length 2000mm length 2400mm length 3000mm length 600mm high; double panel (100mm deep) 500mm length 1000mm length 1500mm length 2000mm length 2400mm length 3000mm length

316

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd HEAT EMITTERS – cont'd Flat panel type steel radiators; fixed with and including brackets; taking down once for decoration; refixing – cont'd 700mm high; single panel (44mm deep) 500mm length 1000mm length 1500mm length 2000mm length 2400mm length 3000mm length

202.73 322.43 442.13 561.83 657.59 923.03

233.41 371.22 509.04 646.85 757.10 1062.71

2.28 2.28 3.23 3.87 4.17 5.24

56.18 56.18 79.58 95.35 102.74 129.11

nr nr nr nr nr nr

289.58 427.40 588.62 742.20 859.84 1191.81

488.11 810.16 1132.21 1454.26 1711.90 1927.01

561.97 932.76 1303.54 1674.33 1970.95 2218.61

2.23 2.83 3.73 4.46 4.48 5.24

54.94 69.73 91.90 109.89 110.38 129.11

nr nr nr nr nr nr

616.92 1002.48 1395.44 1784.21 2081.33 2347.72

Free standing flat top, 695mm high, medium speed rating Entering air temperature, 18°C 695mm long, 1 row 1.94 kW, 75 l/sec 695mm long, 2 row 2.64 kW, 75 l/sec 895mm long, 1 row 4.02 kW, 150 l/sec 895mm long, 2 row 5.62 kW, 150 l/sec 1195mm long, 1 row 6.58 kW, 250 l/sec 1195mm long, 2 row 9.27 kW, 250 l/sec 1495mm long, 1 row 9.04 kW, 340 l/sec 1495mm long, 2 row 12.73 kW, 340 l/sec

633.08 633.08 713.38 713.38 812.19 812.19 906.39 906.39

728.88 728.88 821.33 821.33 935.09 935.09 1043.55 1043.55

2.73 2.73 2.73 2.73 3.00 3.00 3.26 3.26

67.26 67.26 67.26 67.26 73.92 73.92 80.32 80.32

nr nr nr nr nr nr nr nr

796.14 796.14 888.59 888.59 1009.01 1009.01 1123.87 1123.87

Free standing flat top, 695mm high, medium speed rating, c/w floor plinth 695mm long, 1 row 1.94 kW, 75 l/sec 695mm long, 2 row 2.64 kW, 75 l/sec 895mm long, 1 row 4.02 kW, 150 l/sec 895mm long, 2 row 5.62 kW, 150 l/sec 1195mm long, 1 row 6.58 kW, 250 l/sec 1195mm long, 2 row 9.27 kW, 250 l/sec 1495mm long, 1 row 9.04 kW, 340 l/sec 1495mm long, 2 row 12.73 kW, 340 l/sec

664.73 664.73 749.04 749.04 852.81 852.81 951.70 951.70

765.32 765.32 862.39 862.39 981.86 981.86 1095.72 1095.72

2.73 2.73 2.73 2.73 3.00 3.00 3.26 3.26

67.26 67.26 67.26 67.26 73.92 73.92 80.32 80.32

nr nr nr nr nr nr nr nr

832.58 832.58 929.65 929.65 1055.78 1055.78 1176.04 1176.04

700mm high; double panel (100mm deep) 500mm length 1000mm length 1500mm length 2000mm length 2400mm length 3000mm length Fan convector; sheet metal casing with lockable access panel; centrifugal fan; air filter; LPHW heating coil; extruded aluminium grilles; 3 speed; includes fixing in position; electrical work elsewhere

Material Costs/Prices for Measured Works – Mechanical Installations

317

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Free standing sloping top, 695mm high, medium speed rating, c/w floor plinth 695mm long, 1 row 1.94 kW, 75 l/sec 695mm long, 2 row 2.64 kW, 75 l/sec 895mm long, 1 row 4.02 kW, 150 l/sec 895mm long, 2 row 5.62 kW, 150 l/sec 1195mm long, 1 row 6.58 kW, 250 l/sec 1195mm long, 2 row 9.27 kW, 250 l/sec 1495mm long, 1 row 9.04 kW, 340 l/sec 1495mm long, 2 row 12.73 kW, 340 l/sec

687.89 687.89 772.20 772.20 875.97 875.97 974.86 974.86

791.99 791.99 889.05 889.05 1008.53 1008.53 1122.38 1122.38

2.73 2.73 2.73 2.73 3.00 3.00 3.26 3.26

67.26 67.26 67.26 67.26 73.92 73.92 80.32 80.32

nr nr nr nr nr nr nr nr

859.25 859.25 956.32 956.32 1082.44 1082.44 1202.70 1202.70

Wall mounted high level sloping discharge 695mm long, 1 row 1.94 kW, 75 l/sec 695mm long, 2 row 2.64 kW, 75 l/sec 895mm long, 1 row 4.02 kW, 150 l/sec 895mm long, 2 row 5.62 kW, 150 l/sec 1195mm long, 1 row 6.58 kW, 250 l/sec 1195mm long, 2 row 9.27 kW, 250 l/sec 1495mm long, 1 row 9.04 kW, 340 l/sec 1495mm long, 2 row 12.73 kW, 340 l/sec

694.84 694.84 714.93 714.93 870.08 870.08 943.43 943.43

799.99 799.99 823.12 823.12 1001.74 1001.74 1086.19 1086.19

2.73 2.73 2.73 2.73 3.00 3.00 3.26 3.26

67.26 67.26 67.26 67.26 73.92 73.92 80.32 80.32

nr nr nr nr nr nr nr nr

867.25 867.25 890.38 890.38 1075.66 1075.66 1166.52 1166.52

Ceiling mounted sloping inlet/outlet 665mm wide 895mm long, 1 row 4.02 kW, 150 l/sec 895mm long, 2 row 5.62 kW, 150 l/sec 1195mm long, 1 row 6.58 kW, 250 l/sec 1195mm long, 2 row 9.27 kW, 250 l/sec 1495mm long, 1 row 9.04 kW, 340 l/sec 1495mm long, 2 row 12.73 kW, 340 l/sec

785.94 785.94 883.23 883.23 969.69 969.69

904.87 904.87 1016.88 1016.88 1116.43 1116.43

4.15 4.15 4.15 4.15 4.15 4.15

102.25 102.25 102.25 102.25 102.25 102.25

nr nr nr nr nr nr

1007.12 1007.12 1119.13 1119.13 1218.68 1218.68

909.78 909.48 1062.34 1062.34 1168.89 1168.89

1047.45 1047.11 1223.10 1223.10 1345.77 1345.77

3.11 3.11 3.11 3.11 3.11 3.11

76.63 76.63 76.63 76.63 76.63 76.63

nr nr nr nr nr nr

1124.08 1123.73 1299.72 1299.72 1422.40 1422.40

222.34 355.74 486.61 621.28 848.69

255.99 409.57 560.25 715.30 977.12

2.00 4.00 5.00 7.00 8.00

49.28 98.55 123.19 172.47 197.11

nr nr nr nr nr

305.26 508.13 683.44 887.76 1174.23

Free standing unit, extended height 1700/1900/2100mm 895mm long, 1 row 4.02 kW, 150 l/sec 895mm long, 2 row 5.62 kW, 150 l/sec 1195mm long, 1 row 6.58 kW, 250 l/sec 1195mm long, 2 row 9.27 kW, 250 l/sec 1495mm long, 1 row 9.04 kW, 340 l/sec 1495mm long, 2 row 12.73 kW, 340 l/sec LTHW trench heating; water temperatures 90°C/70°C; room air temperature 20°C; convector with copper tubes and aluminium fins within steel duct; Includes fixing within floor screed; electrical work elsewhere Natural convection type Normal capacity, 182mm width, complete with linear, natural anodised aluminium grille (grille also costed separately below) 92mm deep 1250mm long, 2250mm long, 3250mm long, 4250mm long, 5000mm long,

234 W output 471 W output 709 W output 946 W output 1124 W output

318

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd HEAT EMITTERS – cont'd Normal capacity, 182mm width, complete with linear, natural anodised aluminium grille (grille also costed separately below) – cont'd 120mm deep 1250mm long, 2250mm long, 3250mm long, 4250mm long, 5000mm long,

294 W output 471 W output 891 W output 1190 W output 1414 W output

259.18 407.84 555.21 702.59 946.53

298.40 469.56 639.23 808.91 1089.76

2.00 4.00 5.00 7.00 8.00

49.28 98.55 123.19 172.47 197.11

nr nr nr nr nr

347.68 568.11 762.42 981.38 1286.87

150mm deep 1250mm long, 2250mm long, 3250mm long, 4250mm long, 5000mm long,

329 W output 664 W output 998 W output 1333 W output 1584 W output

265.54 419.27 570.46 725.46 973.20

305.72 482.72 656.78 835.24 1120.47

2.00 4.00 5.00 7.00 8.00

49.28 98.55 123.19 172.47 197.11

nr nr nr nr nr

355.00 581.27 779.98 1007.71 1317.58

200mm deep 1250mm long, 2250mm long, 3250mm long, 4250mm long, 5000mm long,

396 W output 799 W output 1201 W output 1603 W output 1905 W output

276.97 506.94 603.49 772.46 1026.56

318.88 583.65 694.81 889.35 1181.90

2.00 4.00 5.00 7.00 8.00

49.28 98.55 123.19 172.47 197.11

nr nr nr nr nr

368.16 682.21 818.01 1061.82 1379.01

586.97 710.22 834.72 957.96 1081.20

675.79 817.69 961.03 1102.92 1244.81

2.00 4.00 5.00 7.00 8.00

49.28 98.55 123.19 172.47 197.11

nr nr nr nr nr

725.07 916.25 1084.23 1275.39 1441.92

138.49 138.49

159.45 159.45

-

-

m m

159.54 159.54

57.18 27.95

65.83 32.18

4.00 2.00

98.55 49.28

nr nr

164.39 81.46

Fan assisted type (outputs assume fan at 50%) Normal capacity, 182mm width, complete with Natural anodised aluminium grille 112mm deep 1250mm long, 437 W output 2250mm long, 1019 W output 3250mm long, 1488 W output 4250mm long, 1845 W output 5000mm long, 2038 W output Linear grille anodised aluminium, 170mm width (if supplied as a separate item) Roll up grille, natural anodised aluminium Thermostatic valve with remote regulator (c/w valve body) Fan speed controller Note: as an alternative to thermostatic control, the system can be controlled via two port valves. Refer to valve section in T31 for valve prices

Material Costs/Prices for Measured Works – Mechanical Installations

319

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

LTHW underfloor heating; water flow and return temperatures of 60°C and 70°C; pipework at 300mm centres; pipe fixings; flow and return manifolds and zone actuators; wiring block; insulation; includes fixing in position; excludes secondary pump, mixing valve, zone thermostats and floor finishes ; electrical work elsewhere Note: All rates are expressed on a m2 basis, for the following example areas Screeded floor with 15–25mm stone/marble finish (producing 80–100W/m2) 250m2 area (single zone) 1000m2 area (single zone) 5000m2 area (multi-zone)

24.28 23.65 23.60

27.95 27.23 27.17

0.14 0.12 0.10

3.45 2.96 2.46

m2 m2 m2

31.40 30.19 29.64

Screeded floor with 10mm carpet tile (producing 80–100W/m2) 250m2 area (single zone) 1000m2 area (single zone) 5000m2 area (multi-zone)

24.28 23.65 23.60

27.95 27.23 27.17

0.14 0.12 0.10

3.45 2.96 2.46

m2 m2 m2

31.40 30.19 29.64

Floating timber floor with 20mm timber finish (producing 70–80Wm2) 250m2 are (single zone) 1000m2 area(single zone) 5000m2 area (multi-zone)

30.60 32.80 31.33

35.23 37.76 36.07

0.14 0.12 0.10

3.45 2.96 2.46

m2 m2 m2

38.68 40.72 38.53

Floating timber floor with 10mm carpet tile (producing 70–80W/m2) 250m2 are (single zone) 1000m2 area(single zone) 5000m2 area (multi-zone)

39.82 36.93 35.33

45.85 42.52 40.68

0.16 0.12 0.10

3.94 2.96 2.46

m2 m2 m2

49.79 45.48 43.14

380.26 380.26 434.72 489.19 813.98 1247.69

437.80 437.80 500.50 563.22 937.16 1436.50

1.00 1.00 1.00 1.00 1.00 1.00

24.64 24.64 24.64 24.64 24.64 24.64

nr nr nr nr nr nr

462.44 462.44 525.14 587.86 961.79 1461.14

PIPE FREEZING Freeze isolation of carbon steel or copper pipelines containing static water, either side of work location, freeze duration not exceeding 4 hours assuming that flow and return circuits are treated concurrently and activities undertaken during normal working hours Up to 4 freezes 50mm dia 65mm dia 80mm dia 100mm dia 150mm dia 200mm dia

320

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd ENERGY METERS Ultrasonic Energy meter for measuring energy use in LTHW systems; includes ultrasonic flow meter (with sensor and signal converter), energy calculator, pair of temperature sensors with brass pockets, and 3m of interconnecting cable; includes fixing in position; electrical work elsewhere Pipe size (flanged connections to PN16); maximum flow rate 50mm, 36m3/hr 65mm, 60m3/hr 80mm, 100m3/hr 125mm, 250m3/hr 150mm, 360m3/hr 200mm, 600m3/hr 250mm, 1000m3/hr 300mm, 1500m3/hr 350mm, 2000m3/hr 400mm, 2500m3/hr 500mm, 3000m3/hr 600mm, 3500m3/hr

1122.84 1237.71 1387.38 1607.41 1744.93 1949.60 2249.72 2644.50 3186.50 3647.61 4139.45 4650.72

1292.75 1425.01 1597.33 1850.65 2008.98 2244.62 2590.16 3044.68 3668.70 4199.58 4765.85 5354.49

1.80 2.32 2.56 3.60 4.80 6.24 9.60 10.80 13.20 15.60 24.00 28.00

44.35 57.16 63.07 88.70 118.26 153.74 236.53 266.09 325.23 384.36 591.32 689.88

nr nr nr nr nr nr nr nr nr nr nr nr

1337.10 1482.17 1660.40 1939.35 2127.25 2398.37 2826.69 3310.77 3993.92 4583.94 5357.17 6044.37

2.77 2.95 3.17 3.54 3.79 4.33

3.19 3.40 3.65 4.08 4.36 4.99

0.15 0.15 0.15 0.15 0.15 0.15

2.90 2.90 2.90 2.90 2.90 2.90

m m m m m m

6.09 6.30 6.55 6.98 7.27 7.89

1.38 1.48 1.59 1.77 1.89 2.16

1.59 1.70 1.83 2.04 2.18 2.49

0.13 0.13 0.13 0.13 0.13 0.13

2.52 2.52 2.52 2.52 2.52 2.52

nr nr nr nr nr nr

4.10 4.22 4.35 4.55 4.69 5.00

Y50 –THERMAL INSULATION For flexible closed cell insulation see Section S10: Cold Water Mineral fibre sectional insulation; bright class O foil faced; bright class O foil taped joints; 19mm aluminium bands CONCEALED PIPEWORK 20mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter Extra over for fittings concealed insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter

Material Costs/Prices for Measured Works – Mechanical Installations

321

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Valves 15mm 20mm 25mm 32mm 40mm 50mm

Net Price £

diameter diameter diameter diameter diameter diameter

Material £

Labour hours

Labour £

Unit

Total rate £

2.77 3.17 3.17 3.54 3.79 4.33

3.19 3.65 3.65 4.08 4.36 4.99

0.15 0.15 0.15 0.15 0.15 0.15

2.90 2.90 2.90 2.90 2.90 2.90

nr nr nr nr nr nr

6.09 6.55 6.55 6.98 7.27 7.89

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter

5.53 5.91 6.35 7.07 7.57 8.65

6.37 6.80 7.31 8.14 8.72 9.96

0.22 0.22 0.22 0.22 0.22 0.22

4.26 4.26 4.26 4.26 4.26 4.26

nr nr nr nr nr nr

10.62 11.06 11.57 12.40 12.97 14.22

25mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

3.05 3.28 3.68 4.00 4.28 4.90 5.60 6.14 8.10 9.36 11.15 15.76 18.87 20.17

3.51 3.78 4.24 4.61 4.93 5.64 6.45 7.07 9.33 10.78 12.84 18.14 21.73 23.22

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.22 0.22 0.22 0.22 0.25 0.25 0.25

2.90 2.90 2.90 2.90 2.90 2.90 2.90 4.26 4.26 4.26 4.26 4.84 4.84 4.84

m m m m m m m m m m m m m m

6.41 6.68 7.14 7.51 7.83 8.54 9.35 11.33 13.58 15.03 17.10 22.98 26.56 28.06

Extra over for fittings concealed insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

1.52 1.64 1.84 2.01 2.13 2.45 2.80 3.08 4.05 4.68 5.58 7.88 9.44 10.09

1.75 1.89 2.12 2.31 2.45 2.82 3.22 3.55 4.66 5.39 6.42 9.07 10.87 11.62

0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.18 0.18 0.18 0.18 0.22 0.22 0.22

2.52 2.52 2.52 2.52 2.52 2.52 2.52 3.48 3.48 3.48 3.48 4.26 4.26 4.26

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

4.27 4.40 4.63 4.83 4.97 5.34 5.74 7.03 8.15 8.87 9.91 13.33 15.13 15.87

322

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd Y50 –THERMAL INSULATION – cont'd Extra over for fittings concealed insulation – cont'd Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

3.05 3.28 3.68 4.00 4.28 4.90 5.60 6.14 8.10 9.36 11.15 15.76 18.87 20.17

3.51 3.78 4.24 4.61 4.93 5.64 6.45 7.07 9.33 10.78 12.84 18.14 21.73 23.22

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.25 0.25 0.25

2.90 2.90 2.90 2.90 2.90 2.90 2.90 3.87 3.87 3.87 3.87 4.84 4.84 4.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

6.41 6.68 7.14 7.51 7.83 8.54 9.35 10.94 13.20 14.65 16.71 22.98 26.56 28.06

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

6.09 6.57 7.33 7.99 8.57 9.82 11.20 12.27 16.18 18.72 22.31 31.51 37.74 40.35

7.01 7.56 8.44 9.20 9.87 11.31 12.89 14.13 18.63 21.55 25.69 36.28 43.45 46.46

0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.29 0.29 0.29 0.29 0.36 0.36 0.36

4.26 4.26 4.26 4.26 4.26 4.26 4.26 5.61 5.61 5.61 5.61 6.97 6.97 6.97

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

11.27 11.82 12.70 13.46 14.12 15.56 17.15 19.74 24.24 27.17 31.30 43.25 50.42 53.42

30mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

3.96 4.24 4.49 4.89 5.18 5.92 6.70 7.32 9.46 10.90 12.80 17.89 21.28 22.55 24.78

4.56 4.88 5.17 5.63 5.96 6.82 7.71 8.43 10.89 12.55 14.74 20.60 24.50 25.96 28.53

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.22 0.22 0.22 0.22 0.25 0.25 0.25 0.25

2.90 2.90 2.90 2.90 2.90 2.90 2.90 4.26 4.26 4.26 4.26 4.84 4.84 4.84 4.84

m m m m m m m m m m m m m m m

7.46 7.78 8.07 8.53 8.87 9.72 10.62 12.69 15.15 16.81 18.99 25.44 29.34 30.80 33.37

Material Costs/Prices for Measured Works – Mechanical Installations

323

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over for fittings concealed insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

1.97 2.12 2.24 2.45 2.59 2.97 3.36 3.65 4.74 5.44 6.41 8.95 10.65 11.29 12.39

2.27 2.44 2.58 2.82 2.98 3.42 3.87 4.20 5.46 6.26 7.38 10.30 12.26 13.00 14.26

0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.18 0.18 0.18 0.18 0.22 0.22 0.22 0.22

2.52 2.52 2.52 2.52 2.52 2.52 2.52 3.48 3.48 3.48 3.48 4.26 4.26 4.26 4.26

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

4.78 4.96 5.10 5.34 5.50 5.94 6.38 7.69 8.94 9.75 10.86 14.56 16.52 17.26 18.52

Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

4.24 4.24 4.49 4.89 5.18 5.92 6.70 7.32 9.46 10.90 12.80 17.89 21.28 22.55 24.78

4.88 4.88 5.17 5.63 5.96 6.82 7.71 8.43 10.89 12.55 14.74 20.60 24.50 25.96 28.53

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25

2.90 2.90 2.90 2.90 2.90 2.90 2.90 3.87 3.87 3.87 3.87 4.84 4.84 4.84 4.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7.78 7.78 8.07 8.53 8.87 9.72 10.62 12.30 14.76 16.42 18.61 25.44 29.34 30.80 33.37

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

7.93 8.47 8.97 9.80 10.36 11.85 13.41 14.63 18.94 21.78 25.59 35.78 42.56 45.13 49.55

9.13 9.75 10.33 11.28 11.93 13.64 15.44 16.84 21.81 25.08 29.46 41.19 49.00 51.96 57.05

0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.29 0.29 0.29 0.29 0.36 0.36 0.36 0.36

4.26 4.26 4.26 4.26 4.26 4.26 4.26 5.61 5.61 5.61 5.61 6.97 6.97 6.97 6.97

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

13.39 14.01 14.59 15.54 16.19 17.90 19.70 22.46 27.42 30.69 35.07 48.16 55.97 58.93 64.02

324

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd Y50 –THERMAL INSULATION – cont'd 40mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

5.07 5.23 5.63 6.00 6.30 7.13 8.00 8.70 11.30 12.77 14.90 20.59 24.13 25.80 28.53 31.79

5.84 6.02 6.48 6.91 7.25 8.21 9.21 10.02 13.01 14.70 17.15 23.71 27.78 29.70 32.85 36.60

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.22 0.22 0.22 0.22 0.25 0.25 0.25 0.25 0.25

2.90 2.90 2.90 2.90 2.90 2.90 2.90 4.26 4.26 4.26 4.26 4.84 4.84 4.84 4.84 4.84

m m m m m m m m m m m m m m m m

8.74 8.92 9.39 9.81 10.16 11.11 12.11 14.27 17.27 18.96 21.41 28.54 32.62 34.54 37.69 41.44

Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

2.54 2.61 2.81 2.99 3.15 3.57 4.00 4.36 5.65 6.37 7.46 10.30 12.06 12.89 14.27 15.91

2.92 3.00 3.24 3.44 3.63 4.11 4.61 5.02 6.50 7.33 8.59 11.86 13.88 14.84 16.43 18.32

0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.18 0.18 0.18 0.18 0.22 0.22 0.22 0.22 0.22

2.52 2.52 2.52 2.52 2.52 2.52 2.52 3.48 3.48 3.48 3.48 4.26 4.26 4.26 4.26 4.26

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

5.44 5.52 5.75 5.96 6.14 6.63 7.12 8.50 9.99 10.82 12.07 16.12 18.14 19.10 20.69 22.58

Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

5.07 5.23 5.63 6.00 6.30 7.13 8.00 8.70 11.30 12.77 14.90 20.59 24.13 25.80 28.53 31.79

5.84 6.02 6.48 6.91 7.25 8.21 9.21 10.02 13.01 14.70 17.15 23.71 27.78 29.70 32.85 36.60

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25

2.90 2.90 2.90 2.90 2.90 2.90 2.90 3.87 3.87 3.87 3.87 4.84 4.84 4.84 4.84 4.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

8.74 8.92 9.39 9.81 10.16 11.11 12.11 13.89 16.88 18.57 21.03 28.54 32.62 34.54 37.69 41.44

Extra over for fittings concealed insulation

Material Costs/Prices for Measured Works – Mechanical Installations

325

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

10.16 10.45 11.26 11.99 12.61 14.27 15.99 17.42 22.59 25.53 29.81 41.18 48.26 51.60 28.53 63.60

11.70 12.03 12.96 13.80 14.52 16.43 18.41 20.06 26.01 29.39 34.32 47.41 55.56 59.41 32.85 73.22

0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.29 0.29 0.29 0.29 0.36 0.36 0.36 0.36 0.36

4.26 4.26 4.26 4.26 4.26 4.26 4.26 5.61 5.61 5.61 5.61 6.97 6.97 6.97 6.97 6.97

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

15.96 16.29 17.22 18.06 18.78 20.69 22.67 25.67 31.62 35.01 39.93 54.38 62.53 66.38 39.81 80.19

50mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

7.06 7.42 7.89 8.24 8.67 9.72 10.63 11.37 14.54 16.32 18.84 25.71 29.70 31.47 34.73 38.52

8.13 8.54 9.08 9.49 9.98 11.19 12.24 13.09 16.74 18.79 21.69 29.60 34.19 36.23 39.99 44.35

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.22 0.22 0.22 0.22 0.25 0.25 0.25 0.25 0.25

2.90 2.90 2.90 2.90 2.90 2.90 2.90 4.26 4.26 4.26 4.26 4.84 4.84 4.84 4.84 4.84

m m m m m m m m m m m m m m m m

11.03 11.45 11.99 12.39 12.89 14.09 15.14 17.35 21.00 23.05 25.95 34.44 39.03 41.07 44.82 49.19

3.53 3.71 3.95 4.13 4.34 4.85 5.31 5.69 7.28 8.16 9.42 12.86 14.85 15.74 17.38 19.27

4.06 4.27 4.55 4.75 5.00 5.58 6.11 6.55 8.38 9.39 10.85 14.81 17.10 18.12 20.01 22.19

0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.18 0.18 0.18 0.18 0.22 0.22 0.22 0.22 0.22

2.52 2.52 2.52 2.52 2.52 2.52 2.52 3.48 3.48 3.48 3.48 4.26 4.26 4.26 4.26 4.26

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

6.58 6.79 7.06 7.27 7.51 8.10 8.63 10.03 11.87 12.88 14.33 19.06 21.36 22.38 24.27 26.44

Extra over for fittings concealed insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

326

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd Y50 –THERMAL INSULATION – cont'd Extra over for fittings concealed insulation – cont'd Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

7.06 7.42 7.89 8.24 8.67 9.72 10.63 11.37 14.54 16.32 18.84 25.71 29.70 31.47 34.73 38.52

8.13 8.54 9.08 9.49 9.98 11.19 12.24 13.09 16.74 18.79 21.69 29.60 34.19 36.23 39.99 44.35

0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25

2.90 2.90 2.90 2.90 2.90 2.90 2.90 3.87 3.87 3.87 3.87 4.84 4.84 4.84 4.84 4.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

11.03 11.45 11.99 12.39 12.89 14.09 15.14 16.96 20.61 22.66 25.56 34.44 39.03 41.07 44.82 49.19

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

14.09 14.84 15.77 16.50 17.34 19.44 21.24 22.75 29.07 32.63 37.68 51.45 59.39 62.96 69.48 77.04

16.22 17.09 18.16 19.00 19.96 22.38 24.45 26.19 33.47 37.57 43.38 59.24 68.38 72.49 79.99 88.70

0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.29 0.29 0.29 0.29 0.36 0.36 0.36 0.36 0.36

4.26 4.26 4.26 4.26 4.26 4.26 4.26 5.61 5.61 5.61 5.61 6.97 6.97 6.97 6.97 6.97

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

20.48 21.34 22.41 23.25 24.22 26.64 28.71 31.81 39.08 43.18 48.99 66.20 75.34 79.45 86.96 95.67

4.52 4.78 5.11 5.54 5.84 6.50

5.20 5.50 5.88 6.38 6.72 7.48

0.44 0.44 0.44 0.44 0.44 0.44

8.52 8.52 8.52 8.52 8.52 8.52

m m m m m m

13.72 14.02 14.40 14.89 15.24 16.00

Mineral fibre sectional insulation; bright class O foil faced; bright class O foil taped joints; 22 swg plain/embossed aluminium cladding; pop riveted PLANTROOM PIPEWORK 20mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter

Material Costs/Prices for Measured Works – Mechanical Installations

327

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over for fittings plantroom insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter

5.05 5.36 5.74 6.28 6.63 7.44

5.81 6.17 6.61 7.23 7.63 8.57

0.58 0.58 0.58 0.58 0.58 0.58

11.23 11.23 11.23 11.23 11.23 11.23

nr nr nr nr nr nr

17.04 17.40 17.83 18.46 18.86 19.79

Bends 15mm 20mm 25mm 32mm 40mm 50mm

diameter diameter diameter diameter diameter diameter

2.48 2.64 2.82 3.05 3.20 3.58

2.86 3.04 3.25 3.51 3.68 4.12

0.44 0.44 0.44 0.44 0.44 0.44

8.52 8.52 8.52 8.52 8.52 8.52

nr nr nr nr nr nr

11.37 11.56 11.76 12.03 12.20 12.64

Tees 15mm 20mm 25mm 32mm 40mm 50mm

diameter diameter diameter diameter diameter diameter

1.49 1.58 1.69 1.83 1.93 2.14

1.72 1.82 1.95 2.11 2.22 2.46

0.44 0.44 0.44 0.44 0.44 0.44

8.52 8.52 8.52 8.52 8.52 8.52

nr nr nr nr nr nr

10.23 10.33 10.46 10.62 10.74 10.98

Valves 15mm 20mm 25mm 32mm 40mm 50mm

diameter diameter diameter diameter diameter diameter

2.77 3.17 3.17 3.54 3.79 4.33

3.19 3.65 3.65 4.08 4.36 4.99

0.78 0.78 0.78 0.78 0.78 0.78

15.10 15.10 15.10 15.10 15.10 15.10

nr nr nr nr nr nr

18.29 18.75 18.75 19.17 19.46 20.08

Pumps 15mm 20mm 25mm 32mm 40mm 50mm

diameter diameter diameter diameter diameter diameter

14.85 15.75 16.91 18.45 19.49 21.91

17.10 18.13 19.47 21.24 22.44 25.23

2.34 2.34 2.34 2.34 2.34 2.34

45.29 45.29 45.29 45.29 45.29 45.29

nr nr nr nr nr nr

62.39 63.42 64.76 66.53 67.73 70.51

11.87 12.60 13.53 14.75 15.58 17.52

13.67 14.51 15.58 16.98 17.94 20.17

1.05 1.05 1.05 1.05 1.05 1.05

20.32 20.32 20.32 20.32 20.32 20.32

nr nr nr nr nr nr

33.99 34.83 35.90 37.30 38.26 40.49

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter

328

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PLANTROOM PIPEWORK – cont'd 25mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

4.96 5.36 5.88 6.26 6.73 7.54 8.52 9.24 11.47 13.31 15.50 21.17 25.15 28.16

5.71 6.17 6.77 7.21 7.75 8.68 9.81 10.64 13.21 15.32 17.85 24.37 28.96 32.42

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61

m m m m m m m m m m m m m m

14.23 14.69 15.29 15.72 16.26 17.20 18.33 20.70 23.27 25.39 27.91 35.99 40.57 44.03

Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

5.54 6.00 6.62 7.10 7.62 8.59 9.74 10.59 13.41 15.57 18.25 25.21 30.04 33.19

6.38 6.91 7.62 8.17 8.77 9.89 11.21 12.19 15.44 17.93 21.01 29.02 34.59 38.21

0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.67 0.67 0.67 0.67 0.87 0.87 0.87

11.23 11.23 11.23 11.23 11.23 11.23 11.23 12.97 12.97 12.97 12.97 16.84 16.84 16.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

17.60 18.13 18.85 19.40 20.00 21.12 22.44 25.16 28.41 30.89 33.98 45.86 51.42 55.05

Bends 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

2.72 2.95 3.23 3.45 3.71 4.15 4.68 5.08 6.30 7.33 8.52 11.64 13.84 15.49

3.13 3.40 3.72 3.97 4.27 4.78 5.39 5.85 7.25 8.44 9.81 13.40 15.93 17.83

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

11.65 11.91 12.23 12.49 12.79 13.29 13.90 15.91 17.32 18.50 19.87 25.01 27.55 29.45

Extra over for fittings plantroom insulation

Material Costs/Prices for Measured Works – Mechanical Installations

329

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Tees 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

1.64 1.76 1.94 2.07 2.22 2.48 2.81 3.05 3.78 4.40 5.11 6.98 8.31 9.30

1.89 2.03 2.23 2.38 2.56 2.86 3.24 3.51 4.35 5.07 5.88 8.04 9.57 10.71

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

10.40 10.54 10.75 10.90 11.07 11.37 11.75 13.58 14.42 15.13 15.95 19.65 21.18 22.32

Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

8.81 9.52 10.51 11.28 12.10 13.63 15.48 16.83 21.29 24.74 28.98 40.05 47.71 52.71

10.14 10.96 12.10 12.99 13.93 15.69 17.82 19.38 24.51 28.48 33.37 46.11 54.93 60.69

0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.92 0.92 0.92 0.92 1.12 1.12 1.12

15.10 15.10 15.10 15.10 15.10 15.10 15.10 17.81 17.81 17.81 17.81 21.68 21.68 21.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

25.24 26.06 27.20 28.08 29.03 30.79 32.92 37.18 42.32 46.29 51.17 67.79 76.61 82.36

Pumps 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

16.31 17.63 19.47 20.87 22.41 25.26 28.65 31.17 39.43 45.79 53.67 74.16 88.35 97.60

18.78 20.30 22.42 24.03 25.80 29.08 32.99 35.89 45.40 52.72 61.79 85.38 101.72 112.37

2.34 2.34 2.34 2.34 2.34 2.34 2.34 2.76 2.76 2.76 2.76 3.36 3.36 3.36

45.29 45.29 45.29 45.29 45.29 45.29 45.29 53.42 53.42 53.42 53.42 65.03 65.03 65.03

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

64.07 65.59 67.70 69.32 71.09 74.37 78.27 89.30 98.81 106.14 115.21 150.41 166.75 177.40

330

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PLANTROOM PIPEWORK – cont'd Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

13.04 14.10 15.57 16.71 17.93 20.21 22.92 24.94 31.54 36.62 42.92 59.34 70.69 78.08

15.01 16.23 17.93 19.24 20.64 23.27 26.39 28.71 36.31 42.16 49.41 68.32 81.39 89.90

1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.26 1.26 1.26 1.26 1.53 1.53 1.53

20.32 20.32 20.32 20.32 20.32 20.32 20.32 24.39 24.39 24.39 24.39 29.61 29.61 29.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

35.33 36.56 38.25 39.56 40.96 43.59 46.71 53.10 60.70 66.55 73.80 97.93 111.00 119.51

30mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

6.11 6.47 6.85 7.50 7.81 8.67 9.78 10.69 13.13 15.00 17.49 23.50 27.80 30.61 34.08

7.03 7.45 7.89 8.63 8.99 9.98 11.26 12.31 15.12 17.27 20.14 27.06 32.01 35.24 39.24

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61

m m m m m m m m m m m m m m m

15.55 15.96 16.40 17.15 17.51 18.50 19.78 22.37 25.18 27.33 30.20 38.67 43.62 46.85 50.85

6.95 7.38 7.82 8.57 8.96 10.04 11.34 12.39 15.48 17.71 20.72 28.21 33.45 36.39 40.37

8.00 8.50 9.00 9.87 10.32 11.56 13.06 14.26 17.82 20.39 23.86 32.48 38.51 41.90 46.48

0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.67 0.67 0.67 0.67 0.87 0.87 0.87 0.87

11.23 11.23 11.23 11.23 11.23 11.23 11.23 12.97 12.97 12.97 12.97 16.84 16.84 16.84 16.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

19.23 19.72 20.23 21.09 21.54 22.78 24.28 27.23 30.79 33.36 36.82 49.32 55.35 58.73 63.32

Extra over for fittings plantroom insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

Material Costs/Prices for Measured Works – Mechanical Installations

331

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Bends 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

3.36 3.55 3.77 4.12 4.29 4.78 5.38 5.87 7.22 8.25 9.63 12.93 15.30 16.83 18.75

3.87 4.09 4.34 4.74 4.94 5.50 6.19 6.76 8.31 9.50 11.09 14.89 17.62 19.38 21.59

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

12.38 12.60 12.86 13.26 13.45 14.02 14.71 16.82 18.38 19.56 21.15 26.50 29.23 30.99 33.20

Tees 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

2.02 2.13 2.26 2.47 2.58 2.86 3.22 3.53 4.34 4.96 5.78 7.76 9.18 10.10 11.26

2.33 2.45 2.60 2.84 2.97 3.29 3.71 4.06 5.00 5.71 6.65 8.93 10.57 11.63 12.96

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

10.84 10.97 11.12 11.36 11.49 11.81 12.22 14.13 15.06 15.77 16.72 20.55 22.18 23.24 24.58

Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

11.05 11.72 12.42 13.61 14.24 15.94 18.02 19.67 24.57 28.14 32.90 44.80 53.12 57.79 64.12

12.72 13.49 14.30 15.67 16.39 18.35 20.75 22.65 28.29 32.40 37.88 51.58 61.16 66.54 73.82

0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.92 0.92 0.92 0.92 1.12 1.12 1.12 1.12

15.10 15.10 15.10 15.10 15.10 15.10 15.10 17.81 17.81 17.81 17.81 21.68 21.68 21.68 21.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

27.82 28.59 29.40 30.77 31.49 33.45 35.84 40.45 46.09 50.20 55.68 73.26 82.83 88.21 95.50

332

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PLANTROOM PIPEWORK – cont'd Pumps 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

20.46 21.71 23.00 25.20 26.36 29.53 33.35 36.42 45.50 52.11 60.93 82.97 98.39 107.04 118.73

23.56 25.00 26.48 29.01 30.35 34.00 38.40 41.93 52.39 60.00 70.15 95.53 113.28 123.24 136.70

2.34 2.34 2.34 2.34 2.34 2.34 2.34 2.76 2.76 2.76 2.76 3.36 3.36 3.36 3.36

45.29 45.29 45.29 45.29 45.29 45.29 45.29 53.42 53.42 53.42 53.42 65.03 65.03 65.03 65.03

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

68.84 70.28 71.77 74.30 75.64 79.29 83.68 95.35 105.80 113.41 123.57 160.55 178.31 188.27 201.73

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

16.37 17.37 18.40 20.16 21.09 23.61 26.69 29.15 36.40 41.70 48.75 66.38 78.70 85.63 94.99

18.85 20.00 21.18 23.21 24.28 27.18 30.73 33.56 41.91 48.01 56.13 76.42 90.61 98.59 109.36

1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.26 1.26 1.26 1.26 1.53 1.53 1.53 1.53

20.32 20.32 20.32 20.32 20.32 20.32 20.32 24.39 24.39 24.39 24.39 29.61 29.61 29.61 29.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

39.17 40.32 41.51 43.53 44.60 47.50 51.05 57.95 66.29 72.40 80.51 106.04 120.22 128.20 138.98

40mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

7.48 7.85 8.36 8.76 9.31 10.31 11.49 12.36 18.10 16.96 19.78 26.15 30.64 33.88 37.86 42.57

8.61 9.04 9.63 10.09 10.72 11.87 13.23 14.23 20.84 19.53 22.77 30.11 35.28 39.01 43.59 49.01

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61 11.61

m m m m m m m m m m m m m m m m

17.13 17.55 18.14 18.60 19.23 20.39 21.74 24.29 30.90 29.59 32.84 41.72 46.89 50.62 55.20 60.62

Material Costs/Prices for Measured Works – Mechanical Installations

333

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over for fittings plantroom insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

8.63 9.01 9.64 10.14 10.76 11.99 13.40 14.45 18.10 20.27 23.65 31.73 37.19 40.70 45.36 50.86

9.94 10.37 11.10 11.67 12.39 13.80 15.43 16.64 20.84 23.34 27.23 36.53 42.82 46.86 52.22 58.56

0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.67 0.67 0.67 0.67 0.87 0.87 0.87 0.87 0.87

11.23 11.23 11.23 11.23 11.23 11.23 11.23 12.97 12.97 12.97 12.97 16.84 16.84 16.84 16.84 16.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

21.16 21.60 22.32 22.90 23.61 25.03 26.65 29.60 33.81 36.30 40.20 53.37 59.66 63.70 69.06 75.39

Bends 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

4.11 4.31 4.60 4.81 5.12 5.67 6.32 6.79 8.38 9.32 10.88 14.37 16.74 18.64 20.83 23.42

4.73 4.96 5.30 5.54 5.89 6.53 7.28 7.82 9.65 10.73 12.53 16.54 19.27 21.46 23.98 26.96

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61 11.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

13.25 13.48 13.81 14.05 14.41 15.04 15.79 17.88 19.71 20.79 22.59 28.16 30.89 33.07 35.59 38.58

Tees 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

2.47 2.58 2.76 2.89 3.08 3.40 3.79 4.08 5.03 5.60 6.53 8.63 10.12 11.17 12.50 14.05

2.84 2.97 3.18 3.33 3.55 3.91 4.36 4.70 5.79 6.45 7.52 9.94 11.65 12.86 14.39 16.18

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61 11.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

11.36 11.49 11.69 11.84 12.06 12.43 12.88 14.76 15.86 16.51 17.58 21.55 23.26 24.47 26.00 27.79

334

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PLANTROOM PIPEWORK – cont'd Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

13.71 14.31 15.30 16.11 17.08 19.04 21.27 22.95 28.77 32.17 37.56 50.39 59.07 64.64 72.05 80.79

15.78 16.48 17.62 18.55 19.66 21.92 24.49 26.42 33.12 37.04 43.24 58.02 68.01 74.42 82.95 93.02

0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.92 0.92 0.92 0.92 1.12 1.12 1.12 1.12 1.12

15.10 15.10 15.10 15.10 15.10 15.10 15.10 17.81 17.81 17.81 17.81 21.68 21.68 21.68 21.68 21.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

30.88 31.57 32.71 33.64 34.76 37.02 39.58 44.23 50.93 54.84 61.05 79.69 89.69 96.10 104.63 114.69

Pumps 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

25.38 26.50 28.34 29.82 31.64 35.27 39.39 42.51 53.26 59.58 69.56 93.31 109.39 156.51 133.41 149.61

29.22 30.51 32.63 34.33 36.43 40.61 45.35 48.94 61.32 68.60 80.09 107.43 125.94 180.19 153.60 172.25

2.34 2.34 2.34 2.34 2.34 2.34 2.34 2.76 2.76 2.76 2.76 3.36 3.36 3.36 3.36 3.36

45.29 45.29 45.29 45.29 45.29 45.29 45.29 53.42 53.42 53.42 53.42 65.03 65.03 65.03 65.03 65.03

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

74.51 75.80 77.92 79.62 81.72 85.90 90.64 102.36 114.74 122.01 133.50 172.46 190.97 245.22 218.63 237.28

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

20.30 21.21 22.67 23.86 25.31 28.21 31.51 34.01 42.61 47.65 55.64 74.64 87.52 95.75 106.72 119.69

23.37 24.42 26.10 27.47 29.14 32.48 36.28 39.16 49.06 54.86 64.06 85.93 100.76 110.24 122.87 137.80

1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.26 1.26 1.26 1.26 1.53 1.53 1.53 1.53 1.53

20.32 20.32 20.32 20.32 20.32 20.32 20.32 24.39 24.39 24.39 24.39 29.61 29.61 29.61 29.61 29.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

43.69 44.74 46.42 47.79 49.46 52.80 56.60 63.54 73.44 79.25 88.45 115.55 130.38 139.85 152.48 167.41

Material Costs/Prices for Measured Works – Mechanical Installations

335

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

50mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

9.75 10.28 10.89 11.45 11.97 13.21 14.20 15.25 18.84 20.85 23.95 31.40 36.29 39.50 44.03 49.25

11.23 11.84 12.54 13.18 13.78 15.21 16.35 17.56 21.69 24.01 27.57 36.15 41.78 45.48 50.69 56.70

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61 11.61

m m m m m m m m m m m m m m m m

19.74 20.35 21.05 21.70 22.30 23.72 24.86 27.62 31.75 34.07 37.64 47.76 53.39 57.09 62.31 68.32

Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

11.49 12.12 12.84 13.48 14.12 15.68 16.94 18.15 22.70 25.25 29.05 38.62 44.63 48.15 53.54 59.73

13.23 13.95 14.78 15.52 16.26 18.05 19.50 20.90 26.14 29.07 33.45 44.46 51.38 55.44 61.64 68.77

0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.67 0.67 0.67 0.67 0.87 0.87 0.87 0.87 0.87

11.23 11.23 11.23 11.23 11.23 11.23 11.23 12.97 12.97 12.97 12.97 16.84 16.84 16.84 16.84 16.84

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

24.45 25.18 26.01 26.75 27.48 29.28 30.73 33.86 39.10 42.04 46.41 61.30 68.22 72.27 78.48 85.61

Bend 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

5.37 5.66 5.99 6.30 6.57 7.27 7.81 8.38 10.35 11.47 13.18 17.27 19.96 21.72 24.21 27.08

6.18 6.52 6.90 7.25 7.56 8.37 8.99 9.65 11.92 13.21 15.17 19.88 22.98 25.01 27.87 31.18

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61 11.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

14.70 15.03 15.41 15.77 16.08 16.89 17.51 19.71 21.98 23.27 25.24 31.50 34.59 36.62 39.49 42.79

Extra over for fittings plantroom insulation

336

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd PLANTROOM PIPEWORK – cont'd Tee 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

3.22 3.39 3.59 3.78 3.95 4.36 4.68 5.03 6.22 6.88 7.90 10.35 11.98 13.04 14.53 16.25

3.71 3.90 4.13 4.35 4.55 5.02 5.39 5.79 7.16 7.92 9.10 11.92 13.79 15.01 16.73 18.71

0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.52 0.52 0.52 0.52 0.60 0.60 0.60 0.60 0.60

8.52 8.52 8.52 8.52 8.52 8.52 8.52 10.06 10.06 10.06 10.06 11.61 11.61 11.61 11.61 11.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

12.22 12.42 12.65 12.87 13.06 13.54 13.90 15.86 17.23 17.99 19.16 23.53 25.41 26.63 28.34 30.32

Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

18.26 19.24 20.39 21.41 22.43 24.89 26.89 28.84 36.06 40.09 46.14 61.35 70.89 76.79 85.03 94.87

21.02 22.15 23.48 24.65 25.82 28.66 30.96 33.20 41.52 46.16 53.12 70.63 81.62 88.41 97.90 109.23

0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.92 0.92 0.92 0.92 1.12 1.12 1.12 1.12 1.12

15.10 15.10 15.10 15.10 15.10 15.10 15.10 17.81 17.81 17.81 17.81 21.68 21.68 21.68 21.68 21.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

36.12 37.25 38.57 39.75 40.92 43.75 46.06 51.01 59.32 63.96 70.93 92.31 103.29 110.09 119.57 130.90

Pumps 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

33.81 35.64 37.75 39.65 41.54 46.07 37.19 53.42 66.77 74.26 85.45 113.60 131.27 141.65 157.46 175.69

38.93 41.03 43.46 45.65 47.83 53.04 42.82 61.50 76.87 85.50 98.38 130.79 151.13 163.09 181.29 202.28

2.34 2.34 2.34 2.34 2.34 2.34 2.34 2.76 2.76 2.76 2.76 3.36 3.36 3.36 3.36 3.36

45.29 45.29 45.29 45.29 45.29 45.29 45.29 53.42 53.42 53.42 53.42 65.03 65.03 65.03 65.03 65.03

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

84.21 86.32 88.75 90.94 93.11 98.33 88.11 114.92 130.29 138.91 151.80 195.82 216.16 228.11 246.32 267.31

Material Costs/Prices for Measured Works – Mechanical Installations

337

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

Material £

Labour hours

Labour £

Unit

Total rate £

27.04 28.50 30.20 31.71 33.22 36.87 39.83 42.74 53.41 59.40 68.37 90.89 105.01 113.33 125.96 140.54

31.13 32.81 34.77 36.51 38.25 42.45 45.86 49.21 61.49 68.39 78.72 104.64 120.90 130.48 145.02 161.81

1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.26 1.26 1.26 1.26 1.53 1.53 1.53 1.53 1.53

20.32 20.32 20.32 20.32 20.32 20.32 20.32 24.39 24.39 24.39 24.39 29.61 29.61 29.61 29.61 29.61

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

51.45 53.13 55.09 56.83 58.57 62.77 66.18 73.59 85.88 92.77 103.10 134.26 150.51 160.09 174.63 191.42

4.16 4.43 4.78 5.25 5.60 6.32

4.79 5.10 5.50 6.04 6.45 7.28

0.30 0.30 0.30 0.30 0.30 0.30

5.81 5.81 5.81 5.81 5.81 5.81

m m m m m m

10.60 10.91 11.31 11.85 12.25 13.08

Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter

6.37 6.76 7.27 7.92 8.36 9.37

7.33 7.78 8.37 9.12 9.63 10.79

0.75 0.75 0.75 0.75 0.75 0.75

14.52 14.52 14.52 14.52 14.52 14.52

nr nr nr nr nr nr

21.85 22.30 22.89 23.63 24.14 25.30

Bends 15mm 20mm 25mm 32mm 40mm 50mm

diameter diameter diameter diameter diameter diameter

1.05 1.11 1.20 1.31 1.40 1.58

1.21 1.28 1.38 1.51 1.61 1.82

0.30 0.30 0.30 0.30 0.30 0.30

5.81 5.81 5.81 5.81 5.81 5.81

nr nr nr nr nr nr

7.01 7.08 7.19 7.31 7.42 7.63

Tees 15mm 20mm 25mm 32mm 40mm 50mm

diameter diameter diameter diameter diameter diameter

1.05 1.11 1.20 1.31 1.40 1.58

1.21 1.28 1.38 1.51 1.61 1.82

0.30 0.30 0.30 0.30 0.30 0.30

5.81 5.81 5.81 5.81 5.81 5.81

nr nr nr nr nr nr

7.01 7.08 7.19 7.31 7.42 7.63

Mineral fibre sectional insulation; bright class O foil faced; bright class O foil taped joints; 0.8mm polyisobutylene sheeting; welded joints EXTERNAL PIPEWORK 20mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter Extra over for fittings external insulation

Material Costs/Prices for Measured Works – Mechanical Installations

338

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd EXTERNAL PIPEWORK – cont'd Extra over for fittings external insulation – cont'd Valves 15mm 20mm 25mm 32mm 40mm 50mm

diameter diameter diameter diameter diameter diameter

10.12 10.75 11.54 12.56 13.27 14.87

11.65 12.38 13.29 14.46 15.28 17.12

1.03 1.03 1.03 1.03 1.03 1.03

19.93 19.93 19.93 19.93 19.93 19.93

nr nr nr nr nr nr

31.59 32.31 33.22 34.39 35.21 37.05

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter

14.99 15.93 17.12 18.63 19.66 22.03

17.26 18.34 19.71 21.45 22.64 25.36

1.42 1.42 1.42 1.42 1.42 1.42

27.48 27.48 27.48 27.48 27.48 27.48

nr nr nr nr nr nr

44.74 45.82 47.19 48.93 50.12 52.85

25mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

4.59 4.92 5.42 5.87 6.24 7.05 7.99 8.74 11.04 12.71 14.91 20.22 24.14 26.26

5.28 5.66 6.24 6.76 7.18 8.12 9.20 10.06 12.71 14.63 17.17 23.28 27.79 30.23

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68

m m m m m m m m m m m m m m

11.09 11.47 12.05 12.56 12.99 13.92 15.01 17.80 20.45 22.37 24.91 32.96 37.47 39.91

7.01 7.56 8.30 8.88 9.50 10.65 12.04 13.10 16.28 18.85 21.93 29.68 35.33 39.25

8.07 8.70 9.56 10.22 10.94 12.26 13.86 15.08 18.74 21.70 25.25 34.17 40.68 45.19

0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.89 0.89 0.89 0.89 1.15 1.15 1.15

14.52 14.52 14.52 14.52 14.52 14.52 14.52 17.22 17.22 17.22 17.22 22.26 22.26 22.26

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

22.59 23.22 24.07 24.74 25.45 26.78 28.38 32.31 35.97 38.93 42.47 56.43 62.93 67.45

Extra over for fittings external insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

Material Costs/Prices for Measured Works – Mechanical Installations

339

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Bends 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

1.14 1.24 1.34 1.46 1.56 1.76 2.01 2.18 2.76 3.17 3.73 5.05 6.04 6.56

1.31 1.43 1.54 1.68 1.80 2.03 2.31 2.51 3.18 3.65 4.29 5.81 6.95 7.55

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7.12 7.23 7.35 7.49 7.60 7.83 8.12 10.25 10.92 11.39 12.04 15.49 16.63 17.23

Tees 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

1.14 1.24 1.34 1.46 1.56 1.76 2.01 2.18 2.76 3.17 3.73 5.05 6.04 6.56

1.31 1.43 1.54 1.68 1.80 2.03 2.31 2.51 3.18 3.65 4.29 5.81 6.95 7.55

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7.12 7.23 7.35 7.49 7.60 7.83 8.12 10.25 10.92 11.39 12.04 15.49 16.63 17.23

Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

11.14 12.01 13.17 14.11 15.08 16.93 19.14 20.80 25.87 29.93 34.85 47.15 56.11 62.33

12.83 13.83 15.16 16.25 17.36 19.49 22.04 23.95 29.78 34.46 40.12 54.28 64.60 71.76

1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.25 1.25 1.25 1.25 1.55 1.55 1.55

19.93 19.93 19.93 19.93 19.93 19.93 19.93 24.19 24.19 24.19 24.19 30.00 30.00 30.00

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

32.76 33.76 35.10 36.18 37.30 39.43 41.97 48.14 53.98 58.65 64.32 84.28 94.60 101.76

340

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd EXTERNAL PIPEWORK – cont'd Extra over for fittings external insulation – cont'd Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter

16.51 17.79 19.51 20.92 22.35 25.06 28.35 30.82 38.31 44.34 51.62 69.85 83.12 92.34

19.01 20.48 22.46 24.09 25.73 28.85 32.64 35.48 44.11 51.05 59.43 80.42 95.70 106.31

1.42 1.42 1.42 1.42 1.42 1.42 1.42 1.75 1.75 1.75 1.75 2.17 2.17 3.17

27.48 27.48 27.48 27.48 27.48 27.48 27.48 33.87 33.87 33.87 33.87 42.00 42.00 61.35

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

46.49 47.96 49.94 51.57 53.21 56.33 60.12 69.35 77.98 84.92 93.30 122.42 137.70 167.66

30mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

6.65 6.01 6.37 6.91 7.29 8.20 9.22 10.03 12.54 14.35 16.67 22.45 26.64 28.73 31.42

7.66 6.92 7.33 7.96 8.39 9.44 10.62 11.55 14.44 16.52 19.19 25.85 30.67 33.08 36.17

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68

m m m m m m m m m m m m m m m

13.46 12.73 13.14 13.76 14.20 15.25 16.42 19.29 22.18 24.26 26.93 35.52 40.35 42.75 45.85

8.58 9.09 9.64 10.51 10.98 12.26 13.80 15.04 18.51 21.15 24.57 32.83 38.88 42.60 47.06

9.88 10.47 11.10 12.10 12.64 14.12 15.89 17.32 21.31 24.35 28.29 37.80 44.76 49.05 54.18

0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.89 0.89 0.89 0.89 1.15 1.15 1.15 1.15

14.52 14.52 14.52 14.52 14.52 14.52 14.52 17.22 17.22 17.22 17.22 22.26 22.26 22.26 22.26

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

24.39 24.98 25.61 26.62 27.16 28.63 30.40 34.54 38.54 41.58 45.51 60.05 67.02 71.30 76.44

Extra over for fittings external insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

Material Costs/Prices for Measured Works – Mechanical Installations

341

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Bends 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

1.41 1.50 1.60 1.72 1.82 2.06 2.31 2.51 3.14 3.59 4.17 5.62 6.67 7.18 7.85

1.62 1.73 1.84 1.98 2.10 2.37 2.66 2.89 3.62 4.13 4.80 6.47 7.68 8.27 9.04

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7.43 7.53 7.65 7.79 7.90 8.18 8.47 10.63 11.36 11.87 12.54 16.15 17.36 17.94 18.71

Tees 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

1.41 1.50 1.60 1.72 1.82 2.06 2.31 2.51 3.14 3.59 4.17 5.62 6.67 7.18 7.85

1.62 1.73 1.84 1.98 2.10 2.37 2.66 2.89 3.62 4.13 4.80 6.47 7.68 8.27 9.04

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7.43 7.53 7.65 7.79 7.90 8.18 8.47 10.63 11.36 11.87 12.54 16.15 17.36 17.94 18.71

Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

13.63 14.44 15.31 16.68 17.46 19.47 21.91 23.88 29.38 33.58 39.01 52.15 61.75 67.66 74.74

15.69 16.63 17.63 19.20 20.10 22.42 25.23 27.49 33.83 38.66 44.91 60.04 71.09 77.90 86.05

1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.25 1.25 1.25 1.25 1.55 1.55 1.55 1.55

19.93 19.93 19.93 19.93 19.93 19.93 19.93 24.19 24.19 24.19 24.19 30.00 30.00 30.00 30.00

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

35.63 36.56 37.56 39.14 40.04 42.35 45.16 51.69 58.02 62.85 69.11 90.04 101.09 107.90 116.05

342

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd EXTERNAL PIPEWORK – cont'd Extra over for fittings external insulation – cont'd Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter

20.18 21.40 22.68 24.72 25.87 28.83 32.47 35.39 43.53 49.75 57.79 77.26 91.49 100.23 110.73

23.23 24.64 26.11 28.46 29.78 33.19 37.38 40.75 50.12 57.28 66.54 88.95 105.33 115.40 127.49

1.42 1.42 1.42 1.42 1.42 1.42 1.42 1.75 1.75 1.75 1.75 2.17 2.17 2.17 2.17

27.48 27.48 27.48 27.48 27.48 27.48 27.48 33.87 33.87 33.87 33.87 42.00 42.00 42.00 42.00

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

50.72 52.12 53.59 55.94 57.27 60.68 64.87 74.61 83.99 91.15 100.40 130.95 147.33 157.40 169.48

40mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

7.07 7.31 7.81 8.31 8.70 9.70 10.82 11.72 14.64 16.50 19.04 25.40 29.74 32.20 35.39 39.39

8.14 8.42 8.99 9.57 10.02 11.17 12.46 13.49 16.86 19.00 21.92 29.24 34.24 37.07 40.75 45.35

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68 9.68

m m m m m m m m m m m m m m m m

13.95 14.22 14.80 15.37 15.82 16.97 18.26 21.23 24.60 26.74 29.66 38.92 43.92 46.75 50.42 55.03

Material Costs/Prices for Measured Works – Mechanical Installations

343

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over for fittings external insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

10.56 11.03 11.76 12.39 13.09 14.50 16.15 17.41 21.44 23.98 27.79 36.65 42.95 47.20 52.35 58.63

12.16 12.70 13.54 14.26 15.07 16.69 18.59 20.04 24.68 27.61 32.00 42.20 49.45 54.34 60.27 67.50

0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.89 0.89 0.89 0.89 1.15 1.15 1.15 1.15 1.15

14.52 14.52 14.52 14.52 14.52 14.52 14.52 17.22 17.22 17.22 17.22 22.26 22.26 22.26 22.26 22.26

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

26.67 27.21 28.05 28.78 29.59 31.21 33.11 37.27 41.91 44.83 49.22 64.45 71.71 76.60 82.53 89.76

Bends 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

1.76 1.83 1.95 2.08 2.18 2.44 2.71 2.94 3.66 4.12 4.77 6.35 7.43 8.05 8.84 9.85

2.03 2.11 2.25 2.39 2.51 2.81 3.12 3.38 4.21 4.74 5.49 7.31 8.55 9.27 10.18 11.34

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68 9.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7.83 7.91 8.05 8.20 8.32 8.62 8.93 11.13 11.96 12.48 13.23 16.99 18.23 18.95 19.85 21.02

Tees 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

1.76 1.83 1.95 2.08 2.18 2.44 2.71 2.94 3.66 4.12 4.77 6.35 7.43 8.05 8.84 9.85

2.03 2.11 2.25 2.39 2.51 2.81 3.12 3.38 4.21 4.74 5.49 7.31 8.55 9.27 10.18 11.34

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68 9.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7.83 7.91 8.05 8.20 8.32 8.62 8.93 11.13 11.96 12.48 13.23 16.99 18.23 18.95 19.85 21.02

344

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd EXTERNAL PIPEWORK – cont'd Extra over for fittings external insulation – cont'd Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

16.76 17.51 18.67 19.67 20.79 23.04 25.65 27.65 34.06 38.09 44.15 58.20 68.19 74.97 83.15 93.10

19.30 20.16 21.50 22.65 23.94 26.53 29.53 31.83 39.21 43.85 50.83 67.01 78.51 86.31 95.73 107.19

1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.25 1.25 1.25 1.25 1.55 1.55 1.55 1.55 1.55

19.93 19.93 19.93 19.93 19.93 19.93 19.93 24.19 24.19 24.19 24.19 30.00 30.00 30.00 30.00 30.00

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

39.23 40.09 41.43 42.58 43.87 46.46 49.47 56.03 63.41 68.05 75.02 97.01 108.51 116.31 125.73 137.19

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

24.83 25.95 27.66 29.13 30.80 34.14 38.00 40.96 50.46 56.43 65.42 86.23 101.03 111.07 123.19 137.93

28.59 29.88 31.85 33.54 35.46 39.31 43.75 47.16 58.10 64.97 75.32 99.28 116.32 127.88 141.83 158.80

1.42 1.42 1.42 1.42 1.42 1.42 1.42 1.75 1.75 1.75 1.75 2.17 2.17 2.17 2.17 2.17

27.48 27.48 27.48 27.48 27.48 27.48 27.48 33.87 33.87 33.87 33.87 42.00 42.00 42.00 42.00 42.00

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

56.07 57.36 59.33 61.02 62.94 66.79 71.23 81.03 91.97 98.84 109.19 141.28 158.32 169.88 183.83 200.80

50mm thick 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

9.31 9.77 10.33 11.15 11.33 12.55 13.68 14.64 18.12 20.28 23.18 30.70 35.46 38.03 41.73 46.23

10.72 11.25 11.89 12.84 13.04 14.45 15.75 16.86 20.86 23.35 26.69 35.35 40.83 43.78 48.04 53.23

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68 9.68

m m m m m m m m m m m m m m m m

16.52 17.05 17.70 18.64 18.85 20.26 21.56 24.60 28.60 31.09 34.43 45.02 50.50 53.46 57.72 62.90

Material Costs/Prices for Measured Works – Mechanical Installations

345

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over for fittings external insulation Flange/union 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

13.72 14.44 15.26 16.02 16.76 18.48 19.98 21.42 26.33 29.27 33.52 43.85 50.67 54.98 60.84 67.79

15.80 16.63 17.57 18.44 19.30 21.28 23.00 24.66 30.31 33.70 38.59 50.49 58.34 63.30 70.05 78.05

0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.89 0.89 0.89 0.89 1.15 1.15 1.15 1.15 1.15

14.52 14.52 14.52 14.52 14.52 14.52 14.52 17.22 17.22 17.22 17.22 22.26 22.26 22.26 22.26 22.26

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

30.31 31.14 32.08 32.96 33.81 35.79 37.52 41.89 47.54 50.92 55.82 72.74 80.59 85.56 92.30 100.31

Bend 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

2.33 2.45 2.58 2.71 2.84 3.14 3.42 3.65 4.53 5.06 5.80 7.68 8.87 9.51 10.44 11.55

2.68 2.82 2.97 3.12 3.27 3.62 3.94 4.20 5.22 5.83 6.68 8.84 10.21 10.95 12.02 13.30

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68 9.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

8.49 8.63 8.78 8.93 9.08 9.42 9.74 11.94 12.96 13.57 14.42 18.52 19.89 20.63 21.70 22.97

Tee 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

2.33 2.45 2.58 2.71 2.84 3.14 3.42 3.65 4.53 5.06 5.80 7.68 8.87 9.51 10.44 11.55

2.68 2.82 2.97 3.12 3.27 3.62 3.94 4.20 5.22 5.83 6.68 8.84 10.21 10.95 12.02 13.30

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50

5.81 5.81 5.81 5.81 5.81 5.81 5.81 7.74 7.74 7.74 7.74 9.68 9.68 9.68 9.68 9.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

8.49 8.63 8.78 8.93 9.08 9.42 9.74 11.94 12.96 13.57 14.42 18.52 19.89 20.63 21.70 22.97

346

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd EXTERNAL PIPEWORK – cont'd Extra over for fittings external insulation – cont'd Valves 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

21.80 22.93 24.24 25.45 26.63 29.36 31.75 34.02 41.83 46.49 53.22 69.64 80.47 87.31 96.62 107.66

25.10 26.40 27.91 29.30 30.66 33.80 36.55 39.17 48.16 53.53 61.27 80.18 92.65 100.52 111.24 123.95

1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.25 1.25 1.25 1.25 1.55 1.55 1.55 1.55 1.55

19.93 19.93 19.93 19.93 19.93 19.93 19.93 24.19 24.19 24.19 24.19 30.00 30.00 30.00 30.00 30.00

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

45.03 46.33 47.84 49.24 50.59 53.74 56.49 63.36 72.35 77.72 85.47 110.18 122.65 130.52 141.24 153.95

Expansion bellows 15mm diameter 20mm diameter 25mm diameter 32mm diameter 40mm diameter 50mm diameter 65mm diameter 80mm diameter 100mm diameter 125mm diameter 150mm diameter 200mm diameter 250mm diameter 300mm diameter 350mm diameter 400mm diameter

32.30 33.97 35.91 37.72 39.44 43.49 47.04 50.41 61.97 68.88 78.86 103.17 119.22 129.35 143.14 159.50

37.19 39.11 41.34 43.43 45.41 50.07 54.16 58.04 71.35 79.30 90.79 118.78 137.26 148.92 164.80 183.64

1.42 1.42 1.42 1.42 1.42 1.42 1.42 1.75 1.75 1.75 1.75 2.17 2.17 2.17 2.17 2.17

27.48 27.48 27.48 27.48 27.48 27.48 27.48 33.87 33.87 33.87 33.87 42.00 42.00 42.00 42.00 42.00

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

64.67 66.59 68.83 70.91 72.89 77.55 81.64 91.91 105.22 113.17 124.66 160.78 179.26 190.92 206.80 225.63

Range 3°C to 27°C; 240 Volt 1 amp; on/off type

25.86

29.77

0.30

7.39

nr

37.16

Range 0°C to +15°C; 240 Volt 6 amp; frost thermostat

17.44

20.08

0.30

7.39

nr

27.47

Range 3°C to 27°C; 250 Volt 2 amp; changeover type; dead zone

43.26

49.81

0.30

7.39

nr

57.20

Y53 – CONTROL COMPONENTS – MECHANICAL Room thermostats; light and medium duty; installed and connected

Material Costs/Prices for Measured Works – Mechanical Installations

347

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

2 amp; changeover type 2 amp; changeover type; concealed setting 6 amp; on/off type 6 amp; temperature set-back 16 amp; on/off type 16 amp; on/off type; concealed setting 20 amp; on/off type; concealed setting 20 amp; indicated "off" position 20 amp; manual; double pole on/off and neon indicator 20 amp; indicated "off" position

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

20.07 25.31 15.62 32.33 24.06 26.23 22.34 28.17

23.11 29.14 17.98 37.22 27.70 30.20 25.72 32.43

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30

7.39 7.39 7.39 7.39 7.39 7.39 7.39 7.39

nr nr nr nr nr nr nr nr

30.50 36.53 25.38 44.61 35.09 37.59 33.11 39.82

51.28 33.56

59.04 38.64

0.30 0.30

7.39 7.39

nr nr

66.43 46.03

30.58 66.14

35.21 76.15

0.30 0.30

7.39 7.39

nr nr

42.60 83.54

16.73

19.74

0.25

6.16

nr

25.90

Range 5°C to 30°C; 230 Volt standard port single time 10 amp with sensor

25.07

28.86

0.30

7.39

nr

36.26

Range 5°C to 30°C; 230 Volt standard port double time 10 amp with sensor 10 amp with sensor and on/off switch

28.41 43.34

32.71 49.90

0.30 0.30

7.39 7.39

nr nr

40.10 57.29

15.63 15.63

18.00 18.00

0.84 0.84

20.70 20.70

nr nr

38.70 38.70

Temperature range 0°C to 40°C Non standard; 280mm stem

9.51

10.95

0.25

6.16

nr

17.11

Temperature range 18°C to 88°C 13 amp; 178mm stem 20 amp; 178mm stem Non standard; pocket clip; 280mm stem

6.32 9.82 9.11

7.28 11.31 10.49

0.25 0.25 0.25

6.16 6.16 6.16

nr nr nr

13.44 17.47 16.65

Temperature range 40°C to 80°C 13 amp; 178mm stem 20 amp; 178mm stem Non standard; pocket clip; 280mm stem 13 amp; 457mm stem 20 amp; 457mm stem

3.47 6.56 10.21 4.11 7.18

4.00 7.55 11.76 4.73 8.27

0.25 0.25 0.25 0.25 0.25

6.16 6.16 6.16 6.16 6.16

nr nr nr nr nr

10.15 13.71 17.91 10.89 14.43

Range 10°C to 40°C; 240 Volt 20 amp; changeover contacts 2 amp; 'heating-cooling' switch Surface thermostats Cylinder thermostat 6 amp; changeover type; with cable Electrical thermostats; installed and connected

Radiator thermostats Angled valve body; thermostatic head; built in sensor 15mm; liquid filled 15mm; wax filled Immersion thermostats; stem type; domestic water boilers; fitted; electrical work elsewhere

348

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T31: LOW TEMPERATURE HOT WATER HEATING – cont'd Y53 – CONTROL COMPONENTS – MECHANICAL – cont'd Immersion thermostats; stem type; domestic water boilers; fitted; electrical work elsewhere – cont'd Temperature range 50°C to 100°C Non standard; 1780mm stem Non standard; 280mm stem Pockets for thermostats For 178mm stem For 280mm stem

8.59 8.96

9.89 10.32

0.25 0.25

6.16 6.16

nr nr

16.05 16.48

11.24 11.13

12.94 12.81

0.25 0.25

6.16 6.16

nr nr

19.10 18.97

141.18

162.54

0.50

12.32

nr

174.86

Immersion thermostats; stem type; industrial installations; fitted; electrical work elsewhere Temperature range 5°C to 105°C For 305mm stem

Material Costs/Prices for Measured Works – Mechanical Installations

349

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T33: STEAM HEATING Y10 – PIPELINES For pipework prices refer to Section T31; Low Temperature Hot Water Heating Y11 – PIPELINE ANCILLARIES Steam traps and accessories Cast iron; inverted bucket type; steam trap pressure range up to 17 bar at 210°C; screwed ends 1/2" dia. 3/4" dia. 1" dia. 11/2" dia. 2" dia.

97.45 97.45 164.20 506.95 567.45

112.20 112.20 189.05 583.66 653.32

0.85 1.13 1.35 1.80 2.18

20.94 27.84 33.26 44.35 53.71

nr nr nr nr nr

133.14 140.04 222.31 628.01 707.03

Cast iron; inverted bucket type; steam trap pressure range up to 17 bar at 210°C; flanged ends to BS 4504 PN16; bolted connections 15mm dia. 20mm dia. 25mm dia. 40mm dia. 50mm dia.

163.22 197.25 244.85 519.45 579.95

187.92 227.10 281.90 598.06 667.71

1.15 1.25 1.33 1.46 1.60

28.33 30.80 32.77 35.97 39.42

nr nr nr nr nr

216.25 257.90 314.67 634.03 707.13

Stainless steel; thermodynamic trap with pressure range up to 42 bar; temperature range to 400°C; screwed ends to steel 15mm dia. 20mm dia.

65.25 73.85

75.12 85.03

0.84 1.14

20.70 28.10

nr nr

95.83 113.12

Stainless steel; thermodynamic trap with pressure range up to 24 bar; temperature range to 288°C; flanged ends to DIN 2456 PN64; bolted connections 15mm dia. 20mm dia. 25mm dia.

136.61 149.75 173.10

157.28 172.41 199.29

1.24 1.34 1.40

30.57 33.03 34.51

nr nr nr

187.85 205.44 233.80

Malleable iron pipeline strainer; max steam working pressure 14 bar and temperature range to 230°C; screwed ends to steel 1/2" dia. 3/4" dia. 1" dia. 11/2" dia. 2" dia.

19.00 23.75 37.05 76.10 106.85

21.88 27.34 42.66 87.62 123.02

0.84 1.14 1.30 1.50 1.74

20.70 28.10 32.04 36.99 42.92

nr nr nr nr nr

42.58 55.44 74.70 124.61 165.94

Bronze pipeline strainer; max steam working pressure 25 bar; flanged ends to BS 4504 PN25; bolted connections 15mm dia. 20mm dia. 25mm dia.

164.70 200.88 230.33

189.62 231.28 265.18

1.24 1.34 1.40

30.57 33.03 34.51

nr nr nr

220.19 264.31 299.69

Steam traps and strainers

350

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T33: STEAM HEATING – cont'd Y11 – PIPELINE ANCILLARIES – cont'd Steam traps and strainers – cont'd Bronze pipeline strainer; max steam working pressure 25 bar; flanged ends to BS 4504 PN25; bolted connections - cont'd 32mm dia. 40mm dia. 50mm dia. 65mm dia. 80mm dia. 100mm dia.

357.55 405.77 624.05 691.00 859.73 1489.14

411.66 467.17 718.48 795.57 989.83 1714.48

1.46 1.54 1.64 2.50 2.91 3.51

36.02 37.96 40.46 61.60 71.62 86.45

nr nr nr nr nr nr

447.68 505.14 758.94 857.16 1061.45 1800.94

Balanced pressure thermostatic steam trap and strainer; max working pressure up to 13 bar; screwed ends to steel 1/2" dia. 3/4" dia.

135.23 135.59

155.69 156.11

1.26 1.71

31.07 42.19

nr nr

186.76 198.30

Bimetallic thermostatic steam trap and strainer; max working pressure up to 21 bar; flanged ends 15mm 20mm

175.92 193.26

202.54 222.51

1.24 1.34

30.57 33.03

nr nr

233.11 255.53

41.51 46.07 57.57

47.79 53.04 66.28

0.84 1.14 1.30

20.70 28.10 32.04

nr nr nr

68.50 81.14 98.32

Gunmetal; straight; double window; screwed ends to steel 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia.

66.95 73.65 91.05 149.99 149.99 182.13

77.08 84.80 104.83 172.69 172.69 209.69

0.84 1.14 1.30 1.35 1.74 2.08

20.70 28.10 32.04 33.30 42.92 51.33

nr nr nr nr nr nr

97.78 112.89 136.87 205.98 215.61 261.02

SG Iron flanged; BS 4504, PN 25 15mm dia. 20mm dia. 25mm dia. 32mm dia. 40mm dia. 50mm dia.

136.59 160.71 204.91 226.31 295.96 357.55

157.26 185.03 235.92 260.56 340.75 411.66

1.00 1.25 1.50 1.70 2.00 2.30

24.64 30.80 36.99 41.90 49.28 56.77

nr nr nr nr nr nr

181.90 215.83 272.91 302.46 390.02 468.43

Check valve and sight glass; gun metal; screwed 15mm dia. 20mm dia. 25mm dia.

67.61 71.63 120.52

77.84 82.47 138.76

0.84 1.14 1.30

20.70 28.10 32.04

nr nr nr

98.54 110.56 170.80

Sight glasses Pressed brass; straight; single window; screwed ends to steel 15mm dia. 20mm dia. 25mm dia.

Material Costs/Prices for Measured Works – Mechanical Installations

351

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Pressure reducing valves Pressure reducing valve for steam; maximum range of 17 bar and 232°C; screwed ends to steel 15mm dia. 20mm dia. 25mm dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

506.20 547.71 590.56

582.80 630.59 679.93

0.87 0.91 1.35

21.44 22.42 33.26

nr nr nr

604.24 653.01 713.19

711.09 807.52 964.20 1112.85

818.70 929.72 1110.11 1281.25

1.70 1.87 2.12 2.57

41.89 46.07 52.23 63.32

nr nr nr nr

860.58 975.79 1162.34 1344.57

Bronze safety valve; 'pop' type; side outlet; including easing lever; working pressure saturated steam up to 20.7 bar; screwed ends to steel 15mm dia. 20mm dia.

154.00 174.08

177.30 200.42

0.32 0.40

7.88 9.86

nr nr

185.19 210.28

Bronze safety valve; 'pop' type; side outlet; including easing lever; working pressure saturated steam up to 17.2 bar; screwed ends to steel 25mm dia. 32mm dia.

247.73 295.96

285.22 340.75

0.47 0.56

11.58 13.80

nr nr

296.80 354.54

Bronze safety valve; 'pop' type; side outlet; including easing lever; working pressure saturated steam up to 13.8 bar; screwed ends to steel 40mm dia. 50mm dia. 65mm dia. 80mm dia.

383.00 532.99 757.98 982.97

440.96 613.64 872.68 1131.72

0.64 0.76 0.94 1.10

15.77 18.73 23.16 27.10

nr nr nr nr

456.73 632.37 895.84 1158.82

599.00 872.00 950.00 1387.00 1727.00 2106.00

689.64 1003.96 1093.76 1596.89 1988.34 2424.69

8.00 12.05 14.08 37.04 40.00 45.45

197.11 296.85 347.02 912.53 985.54 1119.93

nr nr nr nr nr nr

886.75 1300.80 1440.78 2509.42 2973.87 3544.62

Pressure reducing valve for steam; maximum range of 17 bar and 232°C; flanged ends to BS 4504 PN 25 25mm dia. 32mm dia. 40mm dia. 50mm dia. Safety and relief valves

EQUIPMENT Y23 – CALORIFIERS Non-storage calorifiers; mild steel shell construction with indirect steam heating for secondary LPHW at 82°C flow and 71°C return to BS 853; maximum test on shell 11 bar, tubes 26 bar Horizontal/vertical, for steam at 3 bar-5.5 bar 88 kW capacity 176 kW capacity 293 kW capacity 586 kW capacity 879 kW capacity 1465 kW capacity

352

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T42: LOCAL HEATING UNITS Warm air unit heater for connection to LTHW or steam supplies; suitable for heights up to 3m; recirculating type; mild steel casing; heating coil; adjustable discharge louvre; axial fan; horizontal or vertical discharge; normal speed; entering air temperature 15°C; complete with enclosures; includes fixing in position; includes connections to primary heating supply; electrical work elsewhere Low pressure hot water 7.5 kW, 265 l/sec 15.4 kW, 575 l/sec 26.9 kW, 1040 l/sec 48.0 kW, 1620 l/sec

347.51 420.66 570.01 751.38

400.10 484.32 656.27 865.08

6.53 7.54 8.65 9.35

160.89 185.77 213.12 230.37

nr nr nr nr

560.99 670.09 869.39 1095.45

Steam, 2 Bar 9.2 kW, 265 l/sec 18.8 kW, 575 l/sec 34.8 kW, 1040 l/sec 51.6 kW, 1625 l/sec

496.85 538.01 618.79 838.28

572.04 619.42 712.43 965.13

6.53 6.82 6.82 7.10

160.89 168.03 168.03 174.93

nr nr nr nr

732.92 787.46 880.46 1140.07

Material Costs/Prices for Measured Works – Mechanical Installations

353

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

19015.52 21450.69 27229.23

21893.04 24696.72 31349.69

8.00 8.00 8.00

197.11 197.11 197.11

nr nr nr

22090.15 24893.82 31546.80

35787.61 50368.06 64167.37 80548.90

41203.17 57990.01 73877.50 92737.96

8.00 8.00 8.00 9.00

197.11 197.11 197.11 221.75

nr nr nr nr

41400.28 58187.11 74074.60 92959.71

40625.03 51251.55 66576.67 98995.04 115143.60 133283.90

46772.61 59007.19 76651.38 113975.46 132567.71 153453.09

8.00 8.00 8.00 9.00 9.00 10.00

197.11 197.11 197.11 221.75 221.75 246.38

nr nr nr nr nr nr

46969.72 59204.30 76848.49 114197.21 132789.45 153699.47

13354.62 19394.32

15375.51 22329.17

6.00 6.00

147.83 147.83

nr nr

15523.34 22477.00

T60: CENTRAL REFRIGERATION PLANT CHILLERS Air cooled Selection of air cooled chillers based on chilled water flow and return temperatures 6° C and 12°C, and an outdoor temperature of 35°C Air cooled liquid chiller; refrigerant 407C; scroll compressors; twin circuit; integral controls; includes placing in position; electrical work elsewhere Cooling load 100 kW 150 kW 200 kW Air cooled liquid chiller; refrigerant 407C; reciprocating compressors; twin circuit; integral controls; includes placing in position; electrical work elsewhere Cooling load 250 kW 400 kW 550 kW 700 kW Air cooled liquid chiller; refrigerant R134a; screw compressors; twin circuit; integral controls; includes placing in position; electrical work Cooling load 250 kW 400 kW 600 kW 800 kW 1000 kW 1200 kW Air cooled liquid chiller; ductable for indoor installation; refrigerant 407C; scroll compressors; integral controls; includes placing in position; electrical work elsewhere Cooling load 40 kW 80 kW

354

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

37149.84 39626.50 42103.15 45818.14 49533.12 53248.10 56963.09 61916.40 74299.68 79252.99

42771.54 45622.98 48474.41 52751.57 57028.72 61305.87 65583.03 71285.90 85543.08 91245.95

8.00 8.00 8.00 8.00 8.00 8.00 8.00 9.00 9.00 9.00

197.11 197.11 197.11 197.11 197.11 197.11 197.11 221.75 221.75 221.75

nr nr nr nr nr nr nr nr nr nr

42968.65 45820.09 48671.52 52948.68 57225.83 61502.98 65780.14 71507.64 85764.82 91467.69

Water cooled liquid chiller; refrigerant 407C; reciprocating compressors; twin circuit; integral controls; includes placing in position; electrical work elsewhere Cooling load 200 kw 350 kW 500 kW 650 kW 750 kW

19961.36 33475.97 42848.44 55272.51 59860.52

22982.01 38541.72 49332.48 63636.62 68918.91

8.00 8.00 8.00 9.00 9.00

197.11 197.11 197.11 221.75 221.75

nr nr nr nr nr

23179.12 38738.83 49529.59 63858.37 69140.66

Water cooled condenserless liquid chiller; refrigerant 407C; reciprocating compressors; twin circuit; integral controls; includes placing in position; electrical work elsewhere Cooling load 200 kW 350 kW 500 kW 650 kW 750 kW

17572.07 30846.69 38986.28 47681.14 54256.10

20231.16 35514.57 44885.88 54896.49 62466.40

8.00 8.00 8.00 9.00 9.00

197.11 197.11 197.11 221.75 221.75

nr nr nr nr nr

20428.27 35711.67 45082.99 55118.23 62688.15

T60: CENTRAL REFRIGERATION PLANT – cont'd CHILLERS – cont'd Higher efficiency air cooled Selection of air cooled chillers based on chilled water flow and return temperatures of 6°C and 12°C and an outdoor temperature of 25°C These machines have significantly higher part load operating efficiencies than conventional air cooled machines Air cooled liquid chiller, refrigerant R410A; scroll compressors; complete with free cooling facility; integral controls; including placing in position; electrical work elsewhere Cooling load 250 kW 300 kW 350 kW 400 kW 450 kW 500 kW 600 kW 650 kW 700 kW 750 kW Water cooled Selection of water cooled chillers based on chilled water flow and return temperatures of 6°C and 12°C, and condenser entering and leaving temperatures of 27°C and 33°C

Material Costs/Prices for Measured Works – Mechanical Installations

355

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Water cooled liquid chiller; refrigerant R134a; screw compressors; twin circuit; integral controls; includes placing in position; electrical work elsewhere Cooling load 300 kW 500 kW 700 kW 900 kW 1100 kW 1300 kW

32908.94 43387.24 63494.46 72958.69 87997.94 98043.32

37888.89 49952.81 73102.76 83999.16 101314.23 112879.73

8.00 8.00 9.00 9.00 10.00 10.00

197.11 197.11 221.75 221.75 246.38 246.38

nr nr nr nr nr nr

38085.99 50149.92 73324.50 84220.91 101560.61 113126.11

Water cooled liquid chiller; refrigerant R134a; centrifugal compressors; twin circuit; integral controls; includes placing in position; electrical work elsewhere Cooling load 700 kW 1000 kW 1300 kW 1600 kW 1900 kW 2200 kW 2500 kW 3000 kW 3500 kW 4000 kW 4500 kW 5000 kW

62585.09 88230.87 116053.00 139287.10 169638.60 202107.50 208813.10 254104.90 345865.00 367339.20 391912.10 477972.50

72055.78 101582.41 133614.72 160364.72 195309.16 232691.42 240411.74 292557.32 398203.02 422926.80 451218.20 550301.69

9.00 10.00 10.00 11.00 11.00 13.00 13.00 15.00 15.00 20.00 20.00 25.00

221.75 246.38 246.38 271.02 271.02 320.30 320.30 369.58 369.58 492.77 492.77 615.96

nr nr nr nr nr nr nr nr nr nr nr nr

72277.52 101828.79 133861.10 160635.74 195580.18 233011.72 240732.04 292926.90 398572.60 423419.57 451710.97 550917.65

60011.11 76199.71 86933.29 103745.40 122782.10 145519.80

69092.29 87730.63 100088.47 119444.67 141362.10 167540.58

8.00 9.00 10.00 12.00 14.00 15.00

197.11 221.75 246.38 295.66 344.94 369.58

nr nr nr nr nr nr

69289.40 87952.38 100334.85 119740.33 141707.04 167910.16

Absorption Absorption chiller, for operation using low pressure steam; selection based on chilled water flow and return temperatures of 6°C and 12°C, steam at 1 bar gauge and condenser entering and leaving temperatures of 27°C and 33°C; integral controls; includes placing in position; electrical work elsewhere Cooling load 400 kW 700 kW 1000 kW 1300 kW 1600 kW 2000 kW

356

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

86933.29 108669.80 126390.10 145519.80

100088.47 125114.26 145516.08 167540.58

9.00 10.00 12.00 14.00

221.75 246.38 295.66 344.94

nr nr nr nr

100310.22 125360.64 145811.74 167885.52

13541.50

15590.67

15.00

369.58

nr

15960.24

7198.13 22909.18

8287.39 26375.92

15.00 15.00

369.58 369.58

nr nr

8656.96 26745.49

13228.23 29415.36

15229.99 33866.64

15.00 15.00

369.58 369.58

nr nr

15599.56 34236.22

14395.03 37364.64

16573.35 43018.84

15.00 15.00

369.58 369.58

nr nr

16942.93 43388.42

19842.94 44122.45

22845.68 50799.28

15.00 15.00

369.58 369.58

nr nr

23215.25 51168.85

20174.75 51614.12

23227.70 59424.62

15.00 15.00

369.58 369.58

nr nr

23597.27 59794.20

26552.65

30570.73

15.00

369.58

nr

30940.31

T60: CENTRAL REFRIGERATION PLANT – cont'd CHILLERS – cont'd Absorption chiller, for operation using low pressure hot water; selection based on chilled water flow and return temperatures of 6°C and 12°C, cooling water temperatures of 27°C and 33°C and hot water at 90°C; integral controls; includes placing in position; electrical work elsewhere Cooling load 700 kW 1000 kW 1300 kW 1600 kW HEAT REJECTION Dry air liquid coolers Dry air liquid cooler; selection based on fluid temperatures 45°C on, 40°C off at 32°C dry bulb ambient temperature; includes 20% ethylene glycol; includes placing in postion; electrical work elsewhere Flat coil configuration 500kW Extra for inverter panels (factory wired and mounted on units) 800kW Extra for inverter panels (factory wired and mounted on units) 1100kW Extra for inverter panels (factory wired and mounted on units) 1400kW Extra over for inverter panels (factory wired and mounted on units) 1700kW Extra for inverter panels (factory wired and mounted on units) 2000kW Extra for inverter panels (factory wired and mounted on units) Note: heat rejection capacities above 500kW require multiple units. Prices are therefore for total number of units.

Material Costs/Prices for Measured Works – Mechanical Installations

357

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

'Vee' type coil configuration 500kW Extra for inverter panels (factory mounted on units) 800kW Extra for inverter panels (factory mounted on units) 1100kW Extra for inverter panels (factory mounted on units) 1400kW Extra for inverter panels (factory mounted on units) 1700kW Extra for inverter panels (factory mounted on units) 2000kW Extra for inverter panels (factory mounted on units)

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

13083.91

15063.84

15.00

369.58

nr

15433.41

5063.11 20069.96

5829.29 23107.04

15.00 15.00

369.58 369.58

nr nr

6198.86 23476.62

11725.41 28380.56

13499.76 32675.24

15.00 15.00

369.58 369.58

nr nr

13869.34 33044.82

14178.25 36618.13

16323.77 42159.37

15.00 15.00

369.58 369.58

nr nr

16693.35 42528.94

17629.62 42065.75

20297.42 48431.35

15.00 15.00

369.58 369.58

nr nr

20666.99 48800.93

23450.04 54927.19

26998.61 63239.05

15.00 15.00

369.58 369.58

nr nr

27368.19 63608.63

26444.41

30446.11

15.00

369.58

nr

30815.69

14454.83

16642.21

15.00

369.58

nr

17011.78

6614.12 23714.59

7615.00 27303.20

15.00 15.00

369.58 369.58

nr nr

7984.58 27672.78

10125.60 31747.74

11657.86 36551.96

15.00 15.00

369.58 369.58

nr nr

12027.44 36921.54

14394.71 39636.57

16572.99 45634.58

15.00 15.00

369.58 369.58

nr nr

16942.57 46004.16

17701.77 51614.12

20380.49 59424.62

15.00 15.00

369.58 369.58

nr nr

20750.06 59794.20

26552.65 59454.85

30570.73 68451.85

15.00 15.00

369.58 369.58

nr nr

30940.31 68821.43

26552.65

30570.73

15.00

369.58

nr

30940.31

wired and wired and wired and wired and wired and wired and

Note: Heat rejection capacities above 1100kW require multiple units. Prices are for total number of units. Air cooled condensers Air cooled condenser; refrigerant 407C; selection based on condensing temperature of 45°C at 32°C dry bulb ambient; includes placing in position; electrical work elsewhere Flat coil configuration 500kW Extra for inverter panels mounted on units) 800kW Extra for inverter panels mounted on units) 1100kW Extra for inverter panels mounted on units) 1400kW Extra for inverter panels mounted on units) 1700kW Extra for inverter panels mounted on units) 2000kW Extra for inverter panels mounted on units)

(factory wired and (factory wired and (factory wired and (factory wired and (factory wired and (factory wired and

Note: Heat rejection capacities above 500kW require multiple units. Prices are for total number of units

358

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

14190.27

16337.62

15.00

369.58

nr

16707.19

5062.81 21345.54

5828.94 24575.65

15.00 15.00

369.58 369.58

nr nr

6198.51 24945.23

10366.12 31326.85

11934.78 36067.38

15.00 15.00

369.58 369.58

nr nr

12304.35 36436.96

17629.62 36473.82

20297.42 41993.22

15.00 15.00

369.58 369.58

nr nr

20666.99 42362.79

20732.23 46990.26

23869.53 54101.06

15.00 15.00

369.58 369.58

nr nr

24239.11 54470.64

26456.45 54710.74

30459.97 62989.84

15.00 15.00

369.58 369.58

nr nr

30829.54 63359.42

31098.35

35804.30

15.00

369.58

nr

36173.88

9628.48 4316.76

11085.51 4970.00

20.00 -

492.77 -

nr nr

11578.28 4970.00

4645.96 1077.96 14938.84 6914.77

5349.01 1241.09 17199.47 7961.15

20.00 -

492.77 -

nr nr nr nr

5349.01 1241.09 17692.23 7961.15

6962.11 1094.12 21193.07 9807.21

8015.65 1259.69 24400.11 11291.29

20.00 -

492.77 -

nr nr nr nr

8015.65 1259.69 24892.87 11291.29

10337.61 1249.36 25594.37 11963.61

11901.94 1438.42 29467.44 13774.00

20.00 -

492.77 -

nr nr nr nr

11901.94 1438.42 29960.20 13774.00

13926.70

16034.15

-

nr

16034.15

T60: CENTRAL REFRIGERATION PLANT – cont'd HEAT REJECTION – cont'd 'Vee' type coil configuration 500kW Extra for inverter panels (factory mounted on units) 800kW Extra for inverter panels (factory mounted on units) 1100kW Extra for inverter panels (factory mounted on units) 1400kW Extra for inverter panels (factory mounted on units) 1700kW Extra for inverter panels (factory mounted on units) 2000kW Extra for inverter panels (factory mounted on units)

wired and wired and wired and wired and wired and wired and

Note: Heat rejection capacities above 1100kW require multiple units. Prices are for total number of units. Cooling towers Cooling towers; forced draught, centrifugal fan, conterflow design; based on water temperatures of 35°C on and 29°C off at 21°C wet bulb ambient temperature; includes placing in position; electrical work elsewhere Open circuit type 900kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 1500kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 2100kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 2700kW Extra for stainless steel construction Extra for intake and discharge sound attenuation

-

Material Costs/Prices for Measured Works – Mechanical Installations

359

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Extra for fan dampers for capacity control 3300kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 3900kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 4500kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 5100kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 5700kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 6300kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control Closed circuit type (includes 20% ethylene glycol) 900kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 1500kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 2100kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 2700kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 3300kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

1944.82 31540.59 14601.41

2239.12 36313.47 16810.96

20.00 -

492.77 -

nr nr nr

2239.12 36806.24 16810.96

13134.35 1590.88 35549.45 16458.07

15121.90 1831.62 40928.97 18948.58

20.00 -

492.77 -

nr nr nr nr

15121.90 1831.62 41421.73 18948.58

13386.46 1590.88 40007.88 18656.89

15412.17 1831.62 46062.07 21480.14

23.00 -

566.68 -

nr nr nr nr

15412.17 1831.62 46628.76 21480.14

17754.24 2503.68 46214.91 21293.38

20440.90 2882.55 53208.38 24515.60

23.00 -

566.68 -

nr nr nr nr

20440.90 2882.55 53775.06 24515.60

17707.04 2503.68 48858.91 22814.53

20386.56 2882.55 56252.48 26266.93

30.00 -

739.15 -

nr nr nr nr

20386.56 2882.55 56991.63 26226.93

26221.52 2753.30 58910.87 27273.19

30189.49 3169.94 67825.56 31400.30

30.00 -

739.15 -

nr nr nr nr

30189.49 3169.94 68564.71 31400.30

26600.30 2753.30

30625.60 3169.94

-

nr nr

30625.60 3169.94

26841.24 21855.67

30902.99 25162.98

20.00 -

492.77 -

nr nr

31395.76 25162.98

8076.87 1094.12 49902.11 39785.82

9299.10 1259.69 57453.55 45806.41

20.00 -

492.77 -

nr nr nr nr

9299.10 1259.69 57946.32 45806.41

12892.19 1590.88 60813.45 54051.69

14843.10 1831.62 70016.05 62231.07

20.00 -

492.77 -

nr nr nr nr

14843.10 1831.62 70508.82 62231.07

15518.81 1590.88 65567.46 66972.80

17867.19 1831.62 75489.46 77107.45

25.00 -

615.96 -

nr nr nr nr

17867.19 1831.62 76105.42 77107.45

23162.73 2406.81 101022.52 83550.22

26667.83 2771.02 116309.76 96193.46

25.00 -

615.96 -

nr nr nr nr

26667.83 2771.02 116925.72 96193.46

30811.59 2753.30

35474.15 3169.94

-

nr nr

35474.15 3169.94

-

-

360

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

111230.94 95678.30

128062.96 110156.82

25.00 -

615.96 -

nr nr

128678.92 110156.82

31315.80 2753.30 133165.39 99258.09

36054.66 3169.94 153316.65 114278.32

40.00 -

985.54 -

nr nr nr nr

36054.66 3169.94 154302.18 114278.32

44759.39 4813.61 148521.58 128269.95

51532.61 5542.03 170996.60 147680.40

40.00 -

985.54 -

nr nr nr nr

51532.61 5542.03 171982.14 147680.40

44759.39 4813.61 183135.87 132493.93

51532.61 5542.03 210848.91 152543.58

40.00 -

985.54 -

nr nr nr nr

51532.61 5542.03 211834.44 152543.58

50037.47 5506.60 195619.44 151551.60

57609.39 6339.89 225221.55 174485.15

40.00 -

985.54 -

nr nr nr nr

57609.39 6339.89 226207.09 174485.15

50037.47 5506.60

57609.39 6339.89

-

nr nr

57609.39 6339.89

T60: CENTRAL REFRIGERATION PLANT – cont'd HEAT REJECTION – cont'd Closed circuit type (includes 20% ethylene glycol) – cont'd 3900kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 4500kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 5100kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 5700kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control 6300kW Extra for stainless steel construction Extra for intake and discharge sound attenuation Extra for fan dampers for capacity control

-

Material Costs/Prices for Measured Works – Mechanical Installations

361

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T61: CHILLED WATER SCREWED STEEL Y10 – PIPELINES For pipework prices refer to Section T31 – Low Temperature Hot Water Heating, with the exception of chilled water blocks within brackets as detailed hereafter. For minimum fixing distances, refer to the Tables and Memoranda to the rear of the book Fixings For steel pipes; black malleable iron Oversized pipe clip, to contain 30mm insulation block for vapour barrier 15mm dia 20mm dia 25mm dia 32mm dia 40mm dia 50mm dia 65mm dia 80mm dia 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia

3.21 3.24 3.41 3.51 3.71 5.29 5.71 6.06 9.61 11.15 17.44 22.26 27.48 32.71 37.94 42.49

3.70 3.73 3.93 4.04 4.27 6.09 6.57 6.98 11.06 12.84 20.08 25.63 31.64 37.66 43.68 48.92

0.10 0.11 0.12 0.14 0.15 0.16 0.30 0.35 0.40 0.60 0.77 0.90 1.10 1.25 1.50 1.75

2.46 2.71 2.96 3.45 3.70 3.94 7.39 8.62 9.86 14.79 18.97 22.17 27.10 30.80 36.96 43.12

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

6.16 6.44 6.88 7.49 7.97 10.03 13.97 15.60 20.92 27.63 39.05 47.80 58.74 68.46 80.64 92.04

Screw on backplate (Male), black malleable iron; plugged and screwed M12

0.43

0.50

0.10

2.46

nr

2.96

Screw on backplate (Female), black malleable iron; plugged and screwed M12

0.45

1.01

0.10

2.46

nr

3.48

Galvanised steel; including inserts, bolts, nuts, washers; fixed to backgrounds 41 x 21mm 41 x 41mm

5.08 6.09

5.85 7.01

0.29 0.29

7.15 7.15

m m

12.99 14.16

Threaded rods; metric thread; including nuts, washers etc 12mm dia x 600mm long

2.57

2.96

0.18

4.43

nr

7.39

Extra Over channel sections for fabricated hangers and brackets

362

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T61: CHILLED WATER – cont'd PIPELINES – cont'd For plastic pipework suitable for chilled water systems, refer to ABS pipework details in Section S10: Cold Water with the exception of chilled water blocks within brackets as detailed for the aforementioned steel pipe. For minimum fixing distances, refer to the Tables and Memoranda to the rear of the book For copper pipework, refer to Section S10 – Cold Water with the exception of chilled water blocks within brackets as detailed hereafter. For minimum fixing distances, refer to the Tables and Memoranda to the rear of the book Fixings For Copper pipework Oversized pipe clip, to contain 30mm insulation block for vapour barrier 15mm dia 22mm dia 28mm dia 35mm dia 42mm dia 54mm dia 67mm dia 76mm dia 108mm dia 133mm dia 159mm dia

3.21 3.24 3.41 3.51 3.71 5.29 5.71 6.06 2.49 11.15 17.44

3.70 3.73 3.93 4.04 4.27 6.09 6.57 6.98 13.93 12.84 20.08

0.10 0.11 0.12 0.14 0.15 0.16 0.30 0.35 0.40 0.60 0.77

2.46 2.71 2.96 3.45 3.70 3.94 7.39 8.62 9.86 14.79 18.97

nr nr nr nr nr nr nr nr nr nr nr

6.16 6.44 6.88 7.49 7.97 10.03 13.97 15.60 23.79 27.63 39.05

Screw on backplate, female All sizes 15mm to 54mm x 10mm

1.30

1.50

0.10

2.46

nr

3.96

Screw on backplate, male All sizes 15mm to 54mm x 10mm

1.72

1.98

0.10

2.46

nr

4.44

5.08 6.09

5.85 7.01

0.29 0.29

7.15 7.15

m m

12.99 14.16

1.67

1.92

0.18

4.43

nr

6.36

2.57

2.96

0.18

4.43

nr

7.39

Extra Over channel sections for fabricated hangers and brackets Galvanised steel; including inserts, bolts, nuts, washers; fixed to backgrounds 41 x 21mm 41 x 41mm Threaded rods; metric thread; including nuts, washers etc. 10mm dia x 600mm long for ring clips up to 54mm 12mm dia x 600mm long for ring clips from 54mm

Material Costs/Prices for Measured Works – Mechanical Installations

363

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4769.41 5027.40 5233.56 5628.26 6022.95 6542.23 6669.02 7226.88 7418.72 7672.91 8134.24 8330.49 8892.76 9086.80 9675.54 16242.03 21573.72 24034.50

5491.14 5788.17 6025.53 6479.96 6934.37 7532.23 7678.21 8320.49 8541.36 8834.01 9365.15 9591.10 10238.46 10461.86 11139.69 18699.86 24838.36 27671.52

10.00 12.00 12.00 16.00 16.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 12.00 12.00 12.00 15.00 15.00 15.00

246.38 295.66 295.66 394.21 394.21 246.38 246.38 246.38 246.38 246.38 246.38 246.38 295.66 295.66 295.66 369.58 369.58 369.58

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

5737.52 6083.83 6321.19 6874.17 7328.59 7778.62 7924.59 8566.87 8787.74 9080.40 9611.54 9837.49 10534.12 10757.52 11435.35 19069.43 25207.94 28041.10

20.31 20.31 20.31 20.31 20.31 20.31 20.31 20.31

23.38 23.38 23.38 23.38 23.38 23.38 23.38 23.38

0.27 0.27 0.27 0.30 0.31 0.34 0.40 0.40

6.65 6.65 6.65 7.39 7.64 8.38 9.86 9.86

m m m m m m m m

30.04 30.04 30.04 30.77 31.02 31.76 33.24 33.24

Y11 – PIPELINE ANCILLARIES For prices for ancillaries refer to Section T31 – Low Temperature Hot Water Heating Y22 – HEAT EXCHANGERS Plate heat exchanger; for use in CHW systems; painted carbon steel frame, stainless steel plates, nitrile rubber gaskets, design pressure of 10 bar and operating temperature of 110/135°C Primary side; 13°C in, 8°C out; secondary side; 6°C in, 11°C out 264 kW, 12.60 l/s 290 kW, 13.85 l/s 316 kW, 15.11 l/s 350 kW, 16.69 l/s 395 kW, 18.88 l/s 454 kW, 21.69 l/s 475 kW, 22.66 l/s 527 kW, 25.17 l/s 554 kW, 26.43 l/s 580 kW, 27.68 l/s 633 kW, 30.19 l/s 661 kW, 31.52 l/s 713 kW, 34.04 l/s 740 kW, 35.28 l/s 804 kW, 38.33 l/s 1925 kW, 91.82 l/s 2710 kW, 129.26 l/s 3100 kW, 147.87 l/s Note: For temperature conditions different to those above, the cost of the units can vary significantly, and therefore the manufacturers advice should be sought. Y24 – TRACE HEATING Trace heating; for freeze protection or temperature maintainance of pipework; to BS 6351; including fixing to parent structures by plastic pull ties Straight laid 15mm 25mm 28mm 32mm 35mm 50mm 100mm 150mm

364

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T61: CHILLED WATER – cont'd Y24 – TRACE HEATING – cont'd Trace heating; for freeze protection or temperature maintainance of pipework; to BS 6351; including fixing to parent structures by plastic pull ties – cont'd Helically wound 15mm 25mm 28mm 32mm 35mm 50mm 100mm 150mm

25.87 25.87 25.87 25.87 25.87 25.87 25.87 25.87

29.78 29.78 29.78 29.78 29.78 29.78 29.78 29.78

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

24.64 24.64 24.64 24.64 24.64 24.64 24.64 24.64

m m m m m m m m

54.42 54.42 54.42 54.42 54.42 54.42 54.42 54.42

Connection junction box 100 x 100 x 75mm

44.46

51.19

1.40

34.49

nr

85.68

Single air thermostat 150 x 150 x 75mm

97.41

112.15

1.42

34.99

nr

147.14

Single capillary thermostat 150 x 150 x 75mm

140.15

161.36

1.46

35.97

nr

197.33

Twin capillary thermostat 150 x 150 x 75mm

251.43

289.48

1.46

35.97

nr

325.45

1593.65 1593.65 1670.76 1670.76 1735.02 1839.12 1839.12

1834.81 1834.81 1923.59 1923.59 1997.57 2117.42 2117.42

8.00 8.00 10.00 10.00 13.00 20.00 20.00

197.11 197.11 246.38 246.38 320.30 492.77 492.77

nr nr nr nr nr nr nr

2031.92 2031.92 2169.97 2169.97 2317.87 2610.19 2610.19

Accessories for trace heating; weatherproof; polycarbonate enclosure to IP standards; fully installed

EQUIPMENT PRESSURISATION UNITS Chilled water packaged pressurisation unit complete with expansion vessel(s), interconnecting pipework and necessary isolating and drain valves; includes placing in position; electrical work elsewhere Selection based on a final working pressure of 4 bar, a 3m static head and system operating temperatures of 6°/12°C System volume 1800 litres 4500 litres 7200 litres 9900 litres 15300 litres 22500 litres 27000 litres

Material Costs/Prices for Measured Works – Mechanical Installations

365

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

CHILLED BEAMS Static (passive) beams; based on water at 14°C flow and 16°C return, 24°C room temperature; 600mm wide coil providing 350–400W/m output Static cooled beam for exposed installation with standard casing Static cooled beam for installation above open grid or perforated ceiling Ventilated (active) beams; based on water at 14°C flow and 16°C return, 24°C room temperature; air supply at 10l/s/linear metre; 300mm wide beam providing 250–350W/m output unless stated otherwise; all exposed beams c/w standard casing; electrical work elsewhere Ventilated cooled beam flush mounted within a false ceiling; closed type with integrated secondary air circulation; 600mm wide beam providing 400W/m output Ventilated cooled beam flush mounted within a false ceiling; open type Ventilated cooled beam for exposed mounting with standard casing Ventilated cooled beam flush mounted within a false ceiling; open type; with recessed integrated flush mounted 28W or 35W T5 light fittings Ventilated cooled beam for exposed mounting with recessed integrated flush mounted 28W or 35W T5 light fittings Ventilated cooled beam for exposed mounting with recessed integrated flush mounted direct and indirect 28W or 35W T5 light fittings

117.97

135.82

4.00

98.55

m

234.38

80.89

93.13

4.00

98.55

m

191.68

183.13

210.84

4.50

110.87

m

321.71

161.78

186.26

4.00

98.55

m

284.81

161.78

186.26

4.00

98.55

m

284.81

293.23

337.60

4.00

98.55

m

436.16

293.23

337.60

4.00

98.55

m

436.16

320.20

368.65

4.00

98.55

m

467.21

321.77 2110.30

370.46 2429.64

4.00 8.00

115.53 231.06

nr nr

485.99 2660.70

88.13 129.85 224.50 39.55

101.47 149.50 258.47 45.53

4.00 4.00 8.00 2.00

115.53 115.53 231.06 57.76

nr nr nr nr

217.00 265.03 489.53 103.30

15.36

17.68

0.05

1.44

nr

19.13

LEAK DETECTION Leak detection system consisting of a central control module connected by a leader cable to water sensing cables Control Modules Alarm Only Alarm and location Cables Sensing – 3m length Sensing – 7.5m length Sensing – 15m length Leader – 3.5m length End terminal End terminal

366

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T61: CHILLED WATER – cont'd ENERGY METERS Ultrasonic Energy meter for measuring energy use in chilled water systems; includes ultrasonic flow meter (with sensor and signal converter), energy calculator, pair of temperature sensors with brass pockets, and 3m of interconnecting cable; includes fixing in position; electrical work elsewhere Pipe size (flanged connections to PN16); maximum flow rate 50mm, 36m3/hr 65mm, 60m3/hr 80mm, 100m3/hr 125mm, 250m3/hr 150mm, 360m3/hr 200mm, 600m3/hr 250mm, 1000m3/hr 300mm, 1500m3/hr 350mm, 2000m3/hr 400mm, 2500m3/hr 500mm, 3000m3/hr 600mm, 3500m3/hr

1122.84 1237.71 1387.38 1607.41 1744.93 1949.60 2249.72 2644.50 3186.50 3647.61 4139.45 4650.72

1292.75 1425.01 1597.33 1850.65 2008.98 2244.62 2590.16 3044.68 3668.70 4199.58 4765.85 5354.49

1.80 2.32 2.56 3.60 4.80 6.24 9.60 10.80 13.20 15.60 24.00 28.00

44.35 57.16 63.07 88.70 118.26 153.74 236.53 266.09 325.23 384.36 591.32 689.88

nr nr nr nr nr nr nr nr nr nr nr nr

1337.10 1482.17 1660.40 1939.35 2127.25 2398.37 2826.69 3310.77 3993.92 4583.94 5357.17 6044.37

Pipe size (flanged connections to PN40); maximum flow rate 25mm, 17.7m3/hr 40mm, 45m3/hr

845.73 853.82

973.71 983.03

1.48 1.55

36.46 38.19

nr nr

1010.18 1021.22

Pipe size (flanged connections to PN16); maximum flow rate 50mm, 70m3/hr 65mm, 120m3/hr 80mm, 180m3/hr 125mm, 450m3/hr 150mm, 625m3/hr 200mm, 1100m3/hr 250mm, 1750m3/hr 300mm, 2550m3/hr 350mm, 3450m3/hr 400mm, 4500m3/hr

863.38 867.06 871.47 948.69 1006.79 1083.27 1215.65 1549.53 2015.79 2299.66

994.03 998.27 1003.35 1092.25 1159.14 1247.20 1399.61 1784.01 2320.83 2647.65

1.80 2.32 2.56 3.60 4.80 6.24 9.60 10.80 13.20 15.60

44.35 57.16 63.07 88.70 118.26 153.74 236.53 266.09 325.23 384.36

nr nr nr nr nr nr nr nr nr nr

1038.38 1055.43 1066.42 1180.95 1277.41 1400.94 1636.14 2050.11 2646.05 3032.01

Electromagnetic Energy meter for measuring energy use in chilled water systems; includes electromagnetic flow meter (with sensor and signal converter), energy calculator, pair of temperature sensors with brass pockets, and 3m of interconnecting cable; includes fixing in position; electrical work elsewhere

Material Costs/Prices for Measured Works – Mechanical Installations

367

T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T70: LOCAL COOLING UNITS Split system with ceiling void evaporator unit and external condensing unit Ceiling mounted 4 way blow cassette heat pump unit with remote fan speed and load control; refrigerant 470C; includes outdoor unit Cooling 3.6kW, heating 4.1kW Cooling 4.9kW, heating 5.5kW Cooling 7.1kW, heating 8.2kW Cooling 10kW, heating 11.2kW Cooling 12.20kW, heating 14.60kW

1543.75 1701.20 2059.14 2435.55 2664.34

1777.36 1958.63 2370.74 2804.11 3067.52

35.00 35.00 35.00 35.00 35.00

862.34 862.34 862.34 862.34 862.34

nr nr nr nr nr

2639.70 2820.98 3233.08 3666.45 3929.87

Ceiling mounted 4 way blow cooling only unit with remote fan speed and load control; refrigerant 470C; includes outdoor unit Cooling 3.80kW Cooling 5.20kW Cooling 7.10kW Cooling 10kw Cooling 12.2kW

1397.36 1560.96 1925.07 2236.28 2370.36

1608.82 1797.17 2216.38 2574.69 2729.05

35.00 35.00 35.00 35.00 35.00

862.34 862.34 862.34 862.34 862.34

nr nr nr nr nr

2471.16 2659.52 3078.73 3437.03 3591.40

In ceiling, ducted heat pump unit with remote fan speed and load control; refrigerant 407C; includes outdoor unit Cooling 3.60kW, heating 4.10kW Cooling 4.90kW, heating 5.50kW Cooling 7.10kW, heating 8.20kW Cooling 10kW, heating 11.20kW Cooling 12.20kW, heating 14.50kW

1131.67 1301.42 1301.42 1301.42 2623.76

1302.92 1498.36 1498.36 1498.36 3020.80

35.00 35.00 35.00 35.00 35.00

862.34 862.34 862.34 862.34 862.34

nr nr nr nr nr

2165.26 2360.70 2360.70 2360.70 3883.14

In ceiling, ducted cooling only unit with remote fan speed and load control; refrigerant 407C; includes outdoor unit Cooling 3.70kW Cooling 4.90kW Cooling 7.10kW Cooling 10kW Cooling 12.3kW

1020.97 1214.09 1832.82 2089.90 2329.76

1175.47 1397.81 2110.17 2406.15 2682.31

35.00 35.00 35.00 35.00 35.00

862.34 862.34 862.34 862.34 862.34

nr nr nr nr nr

2037.81 2260.16 2972.52 3268.50 3544.65

Ceiling mounted 4 way blow cassette heat pump unit with remote fan speed and load control; refrigerant 407C; excludes outdoor unit Cooling 3.6kW, heating 4.1kW Cooling 4.9kW, heating 5.5kW Cooling 7.1kW, heating 8.2kW Cooling 10kW, heating 11.2kW Cooling 12.20kW, heating 14.60kW

974.22 997.59 1080.01 1169.81 1268.21

1121.64 1148.55 1243.44 1346.83 1460.12

17.00 17.00 17.00 17.00 17.00

418.85 418.85 418.85 418.85 418.85

nr nr nr nr nr

1540.50 1567.40 1662.30 1765.68 1878.97

Ceiling mounted 4 way blow cooling unit with remote fan speed and load control; refrigerant 407C; excludes outdoor unit Cooling 3.80kW Cooling 5.20kW Cooling 7.10Kw Cooling 10kW Cooling 12.2kW

920.09 927.48 1080.01 1169.81 1268.21

1059.32 1067.83 1243.44 1346.83 1460.12

17.00 17.00 17.00 17.00 17.00

418.85 418.85 418.85 418.85 418.85

nr nr nr nr nr

1478.18 1486.68 1662.30 1765.68 1878.97

Room Units

368

Material Costs/Prices for Measured Works – Mechanical Installations T: MECHANICAL/COOLING/HEATING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

T70: LOCAL COOLING UNITS – cont'd Room Units – cont'd In ceiling, ducted heat pump unit with remote fan speed and load control; refrigerant 407C; excludes outdoor unit Cooling 3.60kW, heating 4.10kW Cooling 4.90kW, heating 5.50kW Cooling 7.10kW, heating 8.20kW Cooling 10kW, heating 11.20kW Cooling 12.20kW, heating 14.50kW

562.15 597.82 987.76 1023.42 1227.62

647.22 688.29 1137.23 1178.29 1413.39

17.00 17.00 17.00 17.00 17.00

418.85 418.85 418.85 418.85 418.85

nr nr nr nr nr

1066.07 1107.14 1556.09 1597.14 1832.24

In ceiling, ducted cooling unit only with remote fan speed and load control; refrigerant 407C; excludes outdoor unit Cooling 3.70kW Cooling 4.90kW Cooling 7.10kW Cooling 10kW Cooling 12.3kW

543.69 580.60 987.76 1023.42 1227.62

625.96 668.46 1137.23 1178.29 1413.39

17.00 17.00 17.00 17.00 17.00

418.85 418.85 418.85 418.85 418.85

nr nr nr nr nr

1044.82 1087.31 1556.09 1597.14 1832.24

External condensing units suitable for connection to multiple indoor units; inverter driven; refrigerant 407C Cooling only 9kW

2126.81

2448.65

17.00

418.85

nr

2867.50

Heat pump Cooling 5.20kW, heating 6.10kW Cooling 6.80kW, heating 2.50kW Cooling 8kW, heating 9.60kW Cooling 14.50kW, heating 16.50kW

1515.45 1932.45 2237.50 3713.60

1744.78 2224.88 2576.09 4275.56

17.00 17.00 17.00 21.00

418.85 418.85 418.85 517.41

nr nr nr nr

2163.63 2643.73 2994.94 4792.97

Material Costs/Prices for Measured Works – Mechanical Installations

369

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: CIRCULAR Y30 – AIR DUCTLINES Galvanised sheet metal DW144 class B spirally wound circular section ductwork; including all necessary stiffeners, joints, couplers in the running length and duct supports Straight duct 80mm dia. 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia. 1120mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

2.64 2.73 3.73 4.75 5.78 7.00 9.56 10.71 11.82 12.86 24.59 27.24 31.29 38.63 48.24 57.13 62.43 70.43 90.87

5.32 5.50 7.51 9.57 11.64 14.10 19.26 21.58 23.81 25.91 49.54 54.88 63.04 77.83 97.19 115.10 125.77 141.89 183.07

0.87 0.87 0.87 0.87 1.21 1.21 1.21 1.21 1.21 1.21 1.39 1.39 1.44 1.46 1.65 2.43 2.43 2.77 3.06

22.22 22.22 22.22 22.22 30.90 30.90 30.90 30.90 30.90 30.90 35.49 35.49 36.77 37.28 42.13 62.05 62.05 70.73 78.14

m m m m m m m m m m m m m m m m m m m

27.54 27.72 29.73 31.79 42.54 45.00 50.16 52.48 54.71 56.81 85.04 90.37 99.81 115.11 139.32 177.15 187.83 212.63 261.21

1.17 1.27 1.94 2.30 3.24 4.11 6.19 6.41 6.77 7.11 18.89 22.08 29.09 32.84 45.28 50.08 55.17 70.00 79.12

2.36 2.56 3.91 4.63 6.53 8.28 12.47 12.91 13.64 14.32 38.06 44.48 58.61 66.16 91.22 100.89 111.15 141.03 159.40

0.15 0.15 0.15 0.20 0.29 0.29 0.44 0.44 0.44 0.44 0.58 0.69 0.81 0.92 1.04 1.16 1.16 1.16 1.16

3.83 3.83 3.83 5.11 7.41 7.41 11.24 11.24 11.24 11.24 14.81 17.62 20.68 23.49 26.56 29.62 29.62 29.62 29.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

6.19 6.39 7.74 9.74 13.93 15.69 23.71 24.15 24.88 25.56 52.87 62.10 79.29 89.65 117.78 130.52 140.77 170.65 189.02

Extra over fittings; circular duct class B End cap 80mm dia. 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia. 1120mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

370

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: CIRCULAR – cont'd AIR DUCTLINES – cont'd Extra over fittings; circular duct class B – cont'd End cap - cont'd Reducer 80mm dia. 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia. 1120mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

3.77 3.94 5.16 6.06 7.21 9.16 12.01 13.51 14.51 15.21 42.21 45.95 58.87 62.33 80.79 88.85 98.75 122.99 116.09

7.60 7.94 10.40 12.21 14.53 18.45 24.20 27.22 29.23 30.64 85.04 92.57 118.60 125.57 162.76 179.00 198.95 247.78 233.88

0.29 0.29 0.29 0.44 0.58 0.58 0.87 0.87 0.87 0.87 0.87 0.96 1.06 1.16 1.25 3.47 3.47 4.05 4.62

7.41 7.41 7.41 11.24 14.81 14.81 22.22 22.22 22.22 22.22 22.22 24.51 27.07 29.62 31.92 88.61 88.61 103.42 117.98

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

15.00 15.34 17.80 23.44 29.34 33.27 46.41 49.43 51.45 52.86 107.25 117.09 145.67 155.19 194.68 267.61 287.56 351.20 351.86

90° segmented radius bend 80mm dia. 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia. 1120mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

2.00 2.29 3.88 5.21 7.69 8.95 9.31 10.97 12.53 13.12 30.25 42.12 46.59 50.74 94.37 104.88 135.03 270.99 249.41

4.03 12.43 7.82 10.50 15.49 18.03 18.76 22.10 25.24 26.43 60.94 84.86 93.86 102.22 190.12 211.30 272.04 545.95 502.47

0.29 0.29 0.29 0.44 0.58 0.58 0.87 0.87 0.87 0.87 0.87 0.96 1.06 1.16 1.25 3.47 3.47 4.05 4.62

7.41 7.41 7.41 11.24 14.81 14.81 22.22 22.22 22.22 22.22 22.22 24.51 27.07 29.62 31.92 88.61 88.61 103.42 117.98

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

11.43 19.84 15.22 21.73 30.30 32.84 40.97 44.32 47.46 48.65 83.16 109.37 120.93 131.85 222.04 299.91 360.65 649.37 620.45

Material Costs/Prices for Measured Works – Mechanical Installations

371

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

45° radius bend 80mm dia. 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia. 1120mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

2.09 2.36 3.34 4.34 6.03 8.09 8.66 10.36 10.49 11.23 32.48 40.76 48.14 52.65 87.22 95.18 105.84 145.48 142.02

4.21 4.75 6.73 8.74 12.15 16.30 17.45 20.87 21.13 22.62 65.44 82.12 96.99 106.07 175.72 191.75 213.23 293.09 286.12

0.29 0.29 0.29 0.40 0.58 0.58 0.87 0.87 0.87 0.87 0.87 0.96 1.06 1.16 1.25 3.47 3.47 4.05 4.62

7.41 7.41 7.41 10.21 14.81 14.81 22.22 22.22 22.22 22.22 22.22 24.51 27.07 29.62 31.92 88.61 88.61 103.42 117.98

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

11.62 12.16 14.13 18.96 26.96 31.11 39.66 43.09 43.35 44.84 87.65 106.63 124.05 135.69 207.64 280.36 301.84 396.51 404.10

90° equal twin bend 80mm dia. 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia. 1120mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

5.98 6.19 10.96 15.37 23.68 32.86 36.61 40.69 44.04 47.40 91.58 121.57 148.53 172.24 237.34 276.40 330.59 528.69 528.66

12.05 12.47 22.08 30.97 47.71 66.20 73.76 81.98 88.73 95.49 184.50 244.92 299.24 347.00 478.16 556.85 666.02 1065.13 1065.06

0.58 0.58 0.58 0.87 1.16 1.16 1.73 1.73 1.73 1.73 1.73 1.82 1.93 2.02 2.11 4.62 4.62 4.62 4.62

14.81 14.81 14.81 22.22 29.62 29.62 44.18 44.18 44.18 44.18 44.18 46.48 49.28 51.58 53.88 117.98 117.98 117.98 117.98

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

26.86 27.28 36.89 53.18 77.33 95.82 117.93 126.15 132.90 139.67 228.68 291.40 348.52 398.59 532.04 674.83 784.00 1183.10 1183.04

372

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: CIRCULAR – cont'd AIR DUCTLINES – cont'd Extra over fittings; circular duct class B – cont'd 90° equal twin bend - cont'd Conical branch 80mm dia. 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia. 1120mm dia. 1250mm dia. 1400mm dia . 1600mm dia.

7.92 8.10 8.77 9.32 12.20 13.61 14.76 15.24 18.84 19.40 39.03 43.48 56.34 59.72 75.74 105.51 105.51 127.10 149.72

15.96 16.32 17.67 18.78 24.58 27.42 29.74 30.70 37.96 39.08 78.63 87.60 113.51 120.31 152.59 212.57 212.57 256.06 301.63

0.58 0.58 0.58 0.87 1.16 1.16 1.73 1.73 1.73 1.73 1.73 1.82 1.93 2.02 2.11 4.62 5.20 5.20 5.20

14.81 14.81 14.81 22.22 29.62 29.62 44.18 44.18 44.18 44.18 44.18 46.48 49.28 51.58 53.88 117.98 132.79 132.79 132.79

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

30.77 31.13 32.48 40.99 54.20 57.04 73.91 74.88 82.13 83.26 122.81 134.07 162.79 171.90 206.47 330.54 345.35 388.85 434.42

45° branch 80mm dia. 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia. 1120mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

6.29 6.44 9.80 10.15 10.64 11.32 14.59 15.17 15.80 16.48 32.77 36.58 52.20 59.09 72.95 90.39 96.59 111.55 136.37

12.67 12.97 19.74 20.45 21.44 22.81 29.39 30.56 31.83 33.20 66.02 73.70 105.16 119.05 146.97 182.10 194.59 224.73 274.74

0.58 0.58 0.58 0.87 1.16 1.16 1.73 1.73 1.73 1.73 1.73 1.82 2.13 2.31 2.31 4.62 4.62 4.62 4.62

14.81 14.81 14.81 22.22 29.62 29.62 44.18 44.18 44.18 44.18 44.18 46.48 54.39 58.99 58.99 117.98 117.98 117.98 117.98

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

27.48 27.79 34.55 42.66 51.06 52.43 73.57 74.74 76.01 77.38 110.20 120.17 159.56 178.03 205.96 300.08 312.57 342.71 392.71

For galvanised sheet metal DW144 class C rates, refer to galvanised sheet metal DW144 class B

Material Costs/Prices for Measured Works – Mechanical Installations

373

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

2.71 2.99 3.14 3.43 3.43 5.72 3.62 5.80 8.13 3.93 8.13 5.72 8.13 10.41 5.72 6.21 6.92 8.75 10.41 5.72 8.80 10.31 5.72 7.30 8.75

69.20 76.35 80.18 87.59 87.59 146.07 92.44 148.11 207.61 100.36 207.61 146.07 207.61 265.83 146.07 158.58 176.71 223.44 265.83 146.07 224.72 263.28 146.07 186.41 223.44

m m m m m m m m m m m m m m m m m m m m m m m m m

Total rate £

U10: DUCTWORK: FLAT OVAL Y30 – AIR DUCTLINES Galvanised sheet metal DW144 class B spirally wound flat oval section ductwork; including all necessary stiffeners, joints, couplers in the running length and duct supports Straight duct 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 1303 x 254mm 632 x 305mm 1275 x 305mm 765 x 356mm 1247 x 356mm 1727 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 1379 x 406mm 1699 x 406mm 709 x 457mm 1189 x 457mm 1671 x 457mm 678 x 508mm 919 x 508mm 1321 x 508mm

16.32 18.70 20.62 27.84 28.28 36.80 30.77 37.33 88.47 33.68 81.62 39.04 82.51 111.15 39.77 42.00 46.28 89.88 91.19 39.72 75.89 109.55 39.33 46.28 89.73

32.88 37.67 41.54 56.09 56.97 74.14 61.99 75.21 178.24 67.85 164.44 78.65 166.23 223.93 80.12 84.62 93.24 181.08 183.72 80.02 152.89 220.70 79.24 93.24 180.77

102.08 114.03 121.73 143.68 144.56 220.20 154.43 223.32 385.84 168.21 372.04 224.72 373.84 489.76 226.19 243.19 269.95 404.52 449.55 226.09 377.61 483.98 225.30 279.65 404.21

374

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: FLAT OVAL – cont'd Y30 – AIR DUCTLINES – cont'd Extra over fittings; flat oval duct class B End cap 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 1303 x 254mm 632 x 305mm 1275 x 305mm 765 x 356mm 1247 x 356mm 1727 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 1379 x 406mm 1699 x 406mm 709 x 457mm 1189 x 457mm 1671 x 457mm 678 x 508mm 919 x 508mm 1321 x 508mm

14.32 14.71 15.10 21.86 21.96 24.37 22.55 23.97 79.20 22.53 69.87 23.64 67.85 100.80 24.33 24.94 26.16 92.90 101.40 23.66 66.25 98.74 31.93 34.44 98.71

28.85 29.64 30.42 44.04 44.24 49.10 45.43 48.29 159.56 45.39 140.76 47.63 136.69 203.08 49.02 50.25 52.70 187.16 204.29 47.67 133.47 198.93 64.33 69.38 198.87

0.20 0.20 0.20 0.29 0.29 0.44 0.44 0.44 0.69 0.69 0.69 0.69 0.69 0.69 1.04 0.69 0.69 1.04 1.04 1.04 1.04 1.04 1.04 1.04 1.04

5.11 5.11 5.11 7.41 7.41 11.24 11.24 11.24 17.62 17.62 17.62 17.62 17.62 17.62 26.56 17.62 17.62 26.56 26.56 26.56 26.56 26.56 26.56 26.56 26.56

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

33.96 34.74 35.53 51.45 51.65 60.33 56.67 59.53 177.18 63.01 158.38 65.25 154.31 220.70 75.57 67.87 70.32 213.72 230.84 74.22 160.03 225.48 90.89 95.94 225.42

Reducer 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 1303 x 254mm 632 x 305mm 1275 x 305mm 765 x 356mm 1247 x 356mm 1727 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 1379 x 406mm 1699 x 406mm 709 x 457mm 1189 x 457mm 1671 x 457mm 678 x 508mm 919 x 508mm 1321 x 508mm

26.73 27.12 27.64 38.54 38.81 49.99 40.93 51.38 117.03 45.00 119.45 48.07 121.52 123.60 53.09 53.74 58.32 123.34 139.78 53.67 108.78 120.94 57.07 60.80 121.78

53.85 54.64 55.68 77.64 78.19 100.71 82.46 103.51 235.77 90.66 240.65 96.84 244.82 249.01 106.96 108.27 117.49 248.49 281.61 108.13 219.15 243.65 114.98 122.49 245.34

0.95 1.06 1.13 1.26 1.26 1.34 1.34 1.34 1.34 0.70 1.16 1.16 1.16 1.25 1.16 1.27 1.44 1.44 1.44 1.16 1.34 1.44 1.16 1.26 1.44

24.26 27.07 28.86 32.18 32.18 34.22 34.22 34.22 34.22 17.88 29.62 29.62 29.62 31.92 29.62 32.43 36.77 36.77 36.77 29.62 34.22 36.77 29.62 32.18 36.77

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

78.11 81.71 84.54 109.82 110.36 134.93 116.68 137.73 269.99 108.53 270.27 126.47 274.44 280.93 136.58 140.70 154.27 285.26 318.38 137.75 253.37 280.42 144.60 154.67 282.12

Material Costs/Prices for Measured Works – Mechanical Installations

375

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

90° radius bend 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 1303 x 254mm 632 x 305mm 1275 x 305mm 765 x 356mm 1247 x 356mm 1727 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 1379 x 406mm 1699 x 406mm 709 x 457mm 1189 x 457mm 1671 x 457mm 678 x 508mm 919 x 508mm 1321 x 508mm

34.91 33.39 32.18 44.46 44.95 60.74 42.60 63.31 142.45 40.22 180.52 46.81 181.51 221.09 48.33 69.67 61.85 162.36 277.73 55.67 134.42 277.00 53.79 60.62 168.08

70.33 67.27 64.83 89.57 90.56 122.37 85.82 127.55 286.99 81.03 363.68 94.31 365.68 445.42 97.37 140.36 124.61 327.10 559.53 112.16 270.81 558.06 108.37 122.13 338.62

0.29 0.58 0.58 0.58 0.87 0.87 0.87 0.87 0.96 0.87 0.96 0.87 0.96 1.25 0.96 0.87 0.96 1.16 1.25 0.87 0.96 1.25 0.87 0.96 1.16

7.41 14.81 14.81 14.81 22.22 22.22 22.22 22.22 24.51 22.22 24.51 22.22 24.51 31.92 24.51 22.22 24.51 29.62 31.92 22.22 24.51 31.92 22.22 24.51 29.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

77.74 82.08 79.64 104.38 112.77 144.59 108.04 149.76 311.50 103.25 388.20 116.52 390.19 477.34 121.88 162.58 149.12 356.72 591.45 134.37 295.32 589.98 130.58 146.64 368.24

45° radius bend 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 1303 x 254mm 632 x 305mm 1275 x 305mm 765 x 356mm 1247 x 356mm 1727 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 1379 x 406mm 1699 x 406mm 709 x 457mm 1189 x 457mm 1671 x 457mm 678 x 508mm 919 x 508mm 1321 x 508mm

24.71 24.23 23.75 32.97 33.18 46.27 32.34 48.18 139.66 35.14 160.85 36.06 161.41 156.99 38.05 52.81 49.49 153.85 185.56 42.85 127.13 182.81 41.79 48.59 156.35

49.78 48.81 47.85 66.42 66.85 93.22 65.15 97.07 281.37 70.79 324.06 72.65 325.18 316.28 76.66 106.39 99.70 309.95 373.84 86.33 256.12 368.30 84.19 97.89 314.99

0.79 0.85 0.95 0.79 0.85 0.98 0.76 0.95 1.16 0.58 1.16 0.87 1.16 1.26 0.69 0.78 0.87 1.16 1.27 0.81 0.95 1.26 0.92 1.10 1.25

20.17 21.71 24.26 20.17 21.71 25.03 19.41 24.26 29.62 14.81 29.62 22.22 29.62 32.18 17.62 19.92 22.22 29.62 32.43 20.68 24.26 32.18 23.49 28.09 31.92

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

69.96 70.52 72.11 86.60 88.55 118.24 84.56 121.32 310.99 85.61 353.68 94.86 354.81 348.46 94.28 126.31 121.92 339.58 406.27 107.01 280.38 400.47 107.69 125.98 346.91

376

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: FLAT OVAL – cont'd Y30 – AIR DUCTLINES – cont'd Extra over fittings; flat oval duct class B – cont'd 90° hard bend with turning vanes 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 1303 x 254mm 632 x 305mm 1275 x 305mm 765 x 356mm 1247 x 356mm 1727 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 1379 x 406mm 1699 x 406mm 709 x 457mm 1189 x 457mm 1671 x 457mm 678 x 508mm 919 x 508mm 1321 x 508mm

35.82 34.96 34.10 36.09 36.42 56.36 41.16 56.01 97.80 54.18 99.59 53.18 100.31 168.59 58.41 56.39 61.56 132.11 206.77 65.29 109.19 171.48 63.12 69.27 138.27

72.16 70.43 68.70 72.71 73.37 113.55 82.92 112.84 197.03 109.15 200.64 107.14 202.09 339.65 117.68 113.61 124.02 266.16 416.57 131.54 219.98 345.47 127.16 139.55 278.57

0.55 1.16 1.16 1.16 1.73 1.73 1.73 1.73 1.82 1.73 1.82 1.73 1.82 1.82 1.73 1.73 1.73 1.82 2.11 1.73 1.82 2.11 1.82 1.82 2.11

14.04 29.62 29.62 29.62 44.18 44.18 44.18 44.18 46.48 44.18 46.48 44.18 46.48 46.48 44.18 44.18 44.18 46.48 53.88 44.18 46.48 53.88 46.48 46.48 53.88

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

86.21 100.05 98.32 102.33 117.55 157.72 127.10 157.02 243.51 153.33 247.11 151.32 248.56 386.13 161.85 157.78 168.20 312.63 470.45 175.71 266.46 399.35 173.64 186.03 332.45

90° branch 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 1303 x 254mm 632 x 305mm 1275 x 305mm 765 x 356mm 1247 x 356mm 1727 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 1379 x 406mm 1699 x 406mm 709 x 457mm 1189 x 457mm 1671 x 457mm 678 x 508mm 919 x 508mm 1321 x 508mm

27.28 27.81 28.32 41.91 42.63 55.40 47.66 60.21 128.17 53.16 128.71 60.00 132.40 168.13 64.71 66.00 73.46 142.20 165.66 66.10 116.75 166.03 70.57 78.05 142.79

54.96 56.03 57.05 84.43 85.88 111.61 96.02 121.30 258.22 107.10 259.31 120.88 266.74 338.72 130.37 132.97 148.00 286.48 333.75 133.17 235.21 334.49 142.17 157.24 287.67

0.58 0.58 1.16 1.16 1.16 1.73 1.73 1.73 1.82 1.73 1.82 1.73 1.82 2.11 1.73 1.73 1.82 1.93 2.11 1.73 1.82 2.11 1.73 1.82 2.11

14.81 14.81 29.62 29.62 29.62 44.18 44.18 44.18 46.48 44.18 46.48 44.18 46.48 53.88 44.18 44.18 46.48 49.28 53.88 44.18 46.48 53.88 44.18 46.48 53.88

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

69.77 70.84 86.68 114.06 115.51 155.79 140.20 165.48 304.69 151.28 305.78 165.06 313.22 392.60 174.55 177.14 194.47 335.77 387.63 177.35 281.69 388.37 186.35 203.72 341.55

Material Costs/Prices for Measured Works – Mechanical Installations

377

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

45° branch 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 1303 x 254mm 632 x 305mm 1275 x 305mm 765 x 356mm 1247 x 356mm 1727 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 1379 x 406mm 1699 x 406mm 709 x 457mm 1189 x 457mm 1671 x 457mm 678 x 508mm 919 x 508mm 1321 x 508mm

Material £

Labour hours

Labour £

Unit

Total rate £

28.81 30.33 32.01 45.99 45.69 67.64 50.95 68.56 158.51 56.61 156.39 65.12 157.00 220.84 69.08 72.47 85.02 171.15 213.34 68.40 134.87 209.90 70.89 84.68 165.16

58.04 61.10 64.49 92.65 92.05 136.27 102.65 138.12 319.34 114.05 315.07 131.19 316.30 444.92 139.17 146.00 171.29 344.81 429.81 137.80 271.72 422.88 142.82 170.60 332.74

0.58 0.58 1.16 1.73 1.73 1.73 1.73 1.82 1.92 1.73 1.82 1.73 1.82 1.82 1.73 1.73 1.73 1.93 2.19 1.73 1.82 2.11 1.73 1.82 1.93

14.81 14.81 29.62 44.18 44.18 44.18 44.18 46.48 49.03 44.18 46.48 44.18 46.48 46.48 44.18 44.18 44.18 49.28 55.92 44.18 46.48 53.88 44.18 46.48 49.28

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

72.85 75.92 94.11 136.83 136.23 180.45 146.82 184.60 368.37 158.23 361.55 175.37 362.78 491.39 183.35 190.18 215.46 394.09 485.73 181.98 318.19 476.76 187.00 217.08 382.02

1.12 1.64 2.16 2.71 3.32 4.53 5.03

1.39 2.04 2.69 3.38 4.14 5.64 6.26

0.33 0.33 0.33 0.33 0.33 0.33 0.33

8.43 8.43 8.43 8.43 8.43 8.43 8.43

m m m m m m m

9.82 10.47 11.12 11.81 12.57 14.07 14.69

For rates for access doors refer to ancillaries in U10: DUCTWORK: RECTANGULAR: CLASS B U10: DUCTWORK: FLEXIBLE Y30: AIR DUCTLINES Aluminium foil flexible ductwork, DW 144 class B; multiply aluminium polyester laminate fabric, with high tensile steel wire helix Duct 102mm 152mm 203mm 254mm 304mm 355mm 406mm

dia dia dia dia dia dia dia

Insulated aluminium foil flexible ductwork, DW144 class B; laminate construction of aluminium and polyester multiply inner core with 25mm insulation; outer layer of multiply aluminium polyester laminate, with high tensile steel wire helix

Material Costs/Prices for Measured Works – Mechanical Installations

378

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: FLEXIBLE – cont'd AIR DUCTLINES – cont'd Insulated aluminium foil flexible ductwork, DW144 class B; laminate construction of aluminium and polyester multiply inner core with 25mm insulation; outer layer of multiply aluminium polyester laminate, with high tensile steel wire helix – cont'd Duct 102mm 152mm 203mm 254mm 304mm 355mm 406mm

dia dia dia dia dia dia dia

2.51 3.27 3.97 4.89 6.29 7.80 8.64

3.12 4.07 4.94 6.09 7.84 9.71 10.77

0.50 0.50 0.50 0.50 0.50 0.50 0.50

12.77 12.77 12.77 12.77 12.77 12.77 12.77

m m m m m m m

15.89 16.84 17.71 18.86 20.61 22.48 23.54

3.10 5.86 7.70 10.97 10.79 15.43 20.66 25.98 32.11 39.54 61.13

6.25 11.81 15.51 22.11 21.73 31.08 41.63 52.33 64.70 79.65 123.15

1.74 1.71 1.79 1.96 1.98 2.23 2.25 2.39 2.95 2.98 3.12

44.43 43.67 45.71 50.05 50.56 56.95 57.46 61.03 75.33 76.10 79.67

m m m m m m m m m m m

50.68 55.48 61.22 72.16 72.29 88.02 99.08 113.36 140.03 155.75 202.82

19.23 19.16 19.30 20.48 20.49 20.64 19.74 26.80 27.55 27.69 29.39

38.73 38.61 38.88 41.25 41.28 41.58 39.76 53.99 55.50 55.78 59.21

0.59 0.59 0.59 0.63 0.63 0.63 0.81 0.78 0.80 0.80 0.85

15.07 15.07 15.07 16.09 16.09 16.09 20.68 19.92 20.43 20.43 21.71

m m m m m m m m m m m

53.80 53.67 53.95 57.34 57.36 57.67 60.45 73.91 75.93 76.21 80.91

U10: DUCTWORK: PLASTIC Y30 – AIR DUCTLINES Rigid gey PVC DW 154 circular section ductwork; solvent welded or filler rod welded joints; excludes couplers and supports (these are detailed separately); ductwork to conform to curent HSE regulations Straight duct (standard length 6m) 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm 450mm 500mm 600mm Extra for supports (BZP finish) Horizontal – Maximum 2.4m centres Vertical – Maximum 4.0m centres Duct Size 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm 450mm 500mm 600mm

Material Costs/Prices for Measured Works – Mechanical Installations

379

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Note: These are maximum figures and may be reduced subject to local conditions (i.e. a high number of changes of direction) Extra over fittings; Rigid grey PVC 90° Bend 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm 450mm 500mm 600mm

14.64 15.86 17.50 22.48 23.93 41.31 49.19 62.48 188.85 219.20 375.21

29.49 31.96 35.26 45.28 48.20 83.23 99.10 125.87 380.47 441.61 755.92

2.00 1.11 1.34 1.79 2.01 2.56 2.71 3.58 4.55 5.01 5.78

51.07 28.34 34.22 45.71 51.33 65.37 69.20 91.42 116.19 127.94 147.60

m m m m m m m m m m m

80.56 60.30 69.47 90.99 99.53 148.60 168.30 217.28 496.66 569.55 903.52

45° Bend 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm 450mm 500mm 600mm

6.53 7.58 8.32 9.39 10.06 16.06 20.90 24.02 92.51 103.45 168.54

13.15 15.26 16.77 18.91 20.27 32.36 42.11 48.40 186.38 208.42 339.54

0.71 0.93 1.14 1.41 1.62 1.93 2.22 2.85 3.77 4.16 4.81

18.13 23.75 29.11 36.01 41.37 49.28 56.69 72.78 96.27 106.23 122.83

m m m m m m m m m m m

31.28 39.01 45.88 54.92 61.64 81.64 98.80 121.18 282.65 314.65 462.37

Tee 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm 450mm 500mm

13.85 16.90 22.48 25.90 31.70 52.80 73.85 71.99 141.57 160.90

27.90 34.05 45.28 52.18 63.86 106.37 148.78 145.03 285.22 324.16

1.04 1.38 1.79 2.25 2.62 3.17 3.73 4.71 5.72 6.33

26.56 35.24 45.71 57.46 66.90 80.95 95.25 120.27 146.07 161.64

m m m m m m m m m m

54.46 69.29 90.99 109.64 130.77 187.32 244.03 265.30 431.29 485.80

Coupler 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm 450mm 500mm

3.70 4.59 5.69 7.45 8.29 9.88 10.39 11.07 26.63 30.05

7.45 9.24 11.46 15.01 16.70 19.89 20.93 22.31 53.64 60.54

0.70 0.91 1.12 1.41 1.60 1.86 2.43 2.66 3.20 3.52

17.88 23.24 28.60 36.01 40.86 47.50 62.05 67.93 81.72 89.89

m m m m m m m m m m

25.33 32.48 40.06 51.01 57.55 67.39 82.98 90.24 135.36 150.43

380

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: PLASTIC – cont'd AIR DUCTLINES – cont'd Extra over fittings; Rigid grey PVC – cont'd Damper 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm

31.02 31.49 32.17 33.25 33.13 38.00 40.60 43.58

62.50 63.44 64.82 66.99 66.74 76.56 81.79 87.79

0.96 1.26 1.52 1.88 2.16 2.94 3.42 3.79

24.51 32.18 38.81 48.01 55.16 75.08 87.33 96.78

m m m m m m m m

87.02 95.61 103.64 114.99 121.89 151.63 169.13 184.57

Reducer 160 x 110 200 x 110 200 x 160 225 x 200 250 x 160 250 x 200 250 x 225 315 x 200 315 x 250 355 x 200 355 x 250 355 x 315 400 x 225 400 x 315 400 x 355 450 x 315

8.11 11.80 10.22 13.41 13.41 13.47 13.22 14.43 14.84 21.98 16.40 20.44 24.82 25.07 22.61 28.49

16.34 23.77 20.60 27.02 27.02 27.15 26.64 29.06 29.89 44.27 33.04 41.17 50.01 50.52 45.56 57.39

0.85 0.98 1.07 1.38 1.38 1.48 1.58 1.63 1.84 1.99 1.97 2.16 2.47 2.75 2.73 2.91

21.71 25.03 27.32 35.24 35.24 37.79 40.35 41.62 46.99 50.82 50.31 55.16 63.07 70.22 69.71 74.31

m m m m m m m m m m m m m m m m

38.05 48.80 47.92 62.26 62.26 64.94 66.99 70.69 76.88 95.09 83.35 96.33 113.09 120.74 115.27 131.70

5.35 5.41 5.84 5.67 6.06 8.63 9.13 9.15

10.78 10.90 11.76 11.43 12.21 17.38 18.38 18.43

0.70 0.91 1.12 1.35 1.55 1.85 2.06 2.62

17.88 23.24 28.60 34.47 39.58 47.24 52.60 66.90

m m m m m m m m

28.65 34.14 40.36 45.91 51.79 64.62 70.99 85.34

14.51 15.91 16.89 21.65 22.05 40.59 43.11 52.61

29.24 32.06 34.02 43.62 44.42 81.77 86.86 106.00

0.65 0.75 0.85 1.07 1.18 1.41 1.53 1.73

16.60 19.15 21.71 27.32 30.13 36.01 39.07 44.18

m m m m m m m m

45.84 51.21 55.73 70.94 74.56 117.78 125.93 150.17

Flange 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm Polypropylene (PPS) DW154 circular section ductwork; filler rod welded joints; excludes couplers and supports (these are detailed separately); ductwork to conform to current HSE regulations Straight duct (standard length 6m) 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm

Material Costs/Prices for Measured Works – Mechanical Installations

381

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra for supports (BZP finish) Horizontal – Maximum 2.4m centres Vertical – Maximum 4.0m centres Duct Size 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm

26.56 26.56 26.56 26.56 26.56 26.56 26.56 37.60

53.51 53.51 53.51 53.51 53.51 53.51 53.51 75.75

0.42 0.42 0.42 0.42 0.42 0.42 0.55 0.55

10.73 10.73 10.73 10.73 10.73 10.73 14.04 14.04

m m m m m m m m

64.24 64.24 64.24 64.24 64.24 64.24 67.56 89.80

90° Bend 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm

10.88 13.55 14.88 20.75 21.04 62.74 70.46 69.05

21.91 27.30 29.97 41.80 42.38 126.39 141.96 139.11

1.01 1.30 1.58 2.10 2.36 3.14 3.52 4.39

25.79 33.20 40.35 53.63 60.27 80.18 89.89 112.10

m m m m m m m m

47.70 60.50 70.31 95.43 102.65 206.58 231.84 251.21

45° Bend 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm

6.79 9.89 10.53 12.91 13.90 39.38 43.90 42.13

13.67 19.92 21.20 26.01 28.00 79.33 88.44 84.87

0.84 1.13 1.39 1.73 1.99 2.57 2.93 3.60

21.45 28.86 35.49 44.18 50.82 65.63 74.82 91.93

m m m m m m m m

35.12 48.78 56.70 70.19 78.82 144.95 163.26 176.80

Tee 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm

30.35 37.58 43.45 51.74 60.06 84.94 106.19 124.08

61.14 75.70 87.54 104.23 121.00 171.12 213.93 249.97

1.55 2.17 2.68 3.38 3.95 4.69 5.44 6.09

39.58 55.41 68.44 86.31 100.87 119.76 138.92 155.51

m m m m m m m m

100.73 131.11 155.97 190.54 221.87 290.88 352.85 405.48

Coupler 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm

6.69 7.21 8.07 8.70 8.82 12.19 15.66 16.00

13.47 14.53 16.27 17.53 17.78 24.55 31.55 32.23

0.84 1.10 1.36 1.67 1.91 2.24 2.58 3.30

21.45 28.09 34.73 42.65 48.77 57.20 65.88 84.27

m m m m m m m m

34.92 42.62 51.00 60.17 66.55 81.75 97.44 116.50

Note – These are maximum figures and may be reduced subject to local conditions (i.e. a high number of changes of direction) Extra over fittings; Polypropylene (DW 154)

382

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: PLASTIC – cont'd AIR DUCTLINES – cont'd Extra over fittings; Polypropylene (DW 154) – cont'd Damper 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm

63.38 72.00 77.56 81.45 83.31 95.10 102.85 107.41

127.68 145.05 156.26 164.09 167.85 191.59 207.21 216.40

0.79 1.13 1.44 1.81 2.08 2.40 2.75 3.57

20.17 28.86 36.77 46.22 53.11 61.29 70.22 91.16

m m m m m m m m

147.85 173.91 193.03 210.31 220.96 252.88 277.43 307.56

Reducer 160 x 110 200 x 160 225 x 200 250 x 200 250 x 225 315 x 200 315 x 250 355 x 200 355 x 250 355 x 315 400 x 315 400 x 355

22.84 23.64 36.56 32.48 39.81 61.23 38.71 66.11 70.36 80.47 95.65 102.36

46.01 47.62 73.66 65.43 80.21 123.35 77.99 133.19 141.76 162.13 192.70 206.22

0.87 1.16 1.46 1.61 1.70 1.66 2.03 2.08 2.05 2.22 2.88 2.92

22.22 29.62 37.28 41.11 43.41 42.39 51.84 53.11 52.35 56.69 73.54 74.57

m m m m m m m m m m m m

68.23 77.24 110.94 106.54 123.62 165.74 129.83 186.31 194.10 218.82 266.25 280.79

12.85 14.44 15.96 16.30 17.61 19.90 21.77 23.13

25.89 29.09 32.16 32.84 35.48 40.09 43.87 46.59

0.76 1.02 1.27 1.55 1.79 2.08 2.36 3.07

19.41 26.05 32.43 39.58 45.71 53.11 60.27 78.40

m m m m m m m m

45.30 55.13 64.59 72.42 81.19 93.21 104.13 124.98

10.61 11.23 9.50 10.16 10.71 11.27 11.87

21.38 22.62 19.14 20.47 21.58 22.71 23.91

1.19 1.19 1.16 1.16 1.27 1.27 1.27

30.39 30.39 29.62 29.62 32.43 32.43 32.43

m m m m m m m

51.76 53.01 48.76 50.09 54.01 55.14 56.34

Flange 110mm 160mm 200mm 225mm 250mm 315mm 355mm 400mm U10: DUCTWORK: RECTANGULAR – CLASS B Y30 – AIR DUCTLINES Galvanised sheet metal DW144 class B rectangular section ductwork; including all necessary stiffeners, joints, couplers in the running length and duct supports Ductwork up Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

to 400mm longest side sides 200mm sides 300mm sides 400mm sides 500mm sides 600mm sides 700mm sides 800mm

Material Costs/Prices for Measured Works – Mechanical Installations

383

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over fittings; Rectangular ductwork class B; up to 400mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

7.20 8.01 8.82 9.63 10.43 11.24 12.05

14.51 16.14 17.77 19.40 21.01 22.64 24.28

0.38 0.38 0.38 0.38 0.38 0.38 0.38

9.70 9.70 9.70 9.70 9.70 9.70 9.70

nr nr nr nr nr nr nr

24.21 25.84 27.47 29.10 30.72 32.35 33.98

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

11.82 13.35 21.52 23.28 25.04 26.80 28.54

23.81 26.90 43.36 46.90 50.45 53.99 57.50

1.40 1.40 1.42 1.42 1.69 1.69 1.92

35.75 35.75 36.26 36.26 43.16 43.16 49.03

nr nr nr nr nr nr nr

59.56 62.65 79.62 83.16 93.60 97.15 106.53

Offset Sum Sum Sum Sum Sum Sum Sum

two two two two two two two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

17.45 19.73 28.88 31.38 33.45 35.73 37.74

35.16 39.75 58.18 63.22 67.39 71.98 76.03

1.63 1.63 1.65 1.65 1.92 1.92 1.92

41.62 41.62 42.13 42.13 49.03 49.03 49.03

nr nr nr nr nr nr nr

76.78 81.37 100.32 105.35 116.42 121.01 125.06

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

15.36 17.25 22.83 24.84 26.85 28.85 30.85

30.95 34.75 45.99 50.04 54.09 58.12 62.15

1.63 1.63 1.65 1.65 1.92 1.92 1.92

41.62 41.62 42.13 42.13 49.03 49.03 49.03

nr nr nr nr nr nr nr

72.57 76.38 88.13 92.18 103.12 107.15 111.18

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

11.55 12.45 20.68 21.99 23.74 25.26 26.97

23.27 25.08 41.66 44.30 47.83 50.89 54.34

1.22 1.22 1.25 1.25 1.33 1.33 1.40

31.15 31.15 31.92 31.92 33.96 33.96 35.75

nr nr nr nr nr nr nr

54.42 56.24 73.58 76.22 81.79 84.85 90.09

45° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

12.47 13.69 21.65 23.19 24.95 26.59 28.34

25.12 27.58 43.62 46.72 50.27 53.57 57.10

0.89 1.12 1.10 1.10 1.16 1.16 1.22

22.73 28.60 28.09 28.09 29.62 29.62 31.15

nr nr nr nr nr nr nr

47.85 56.18 71.71 74.81 79.89 83.19 88.25

of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

384

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Rectangular ductwork class B; up to 400mm longest side – cont'd 90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

19.25 21.08 30.33 32.69 35.71 38.51 41.58

38.78 42.47 61.10 65.86 71.94 77.58 83.77

1.29 1.29 1.29 1.29 1.39 1.39 1.46

32.94 32.94 32.94 32.94 35.49 35.49 37.28

nr nr nr nr nr nr nr

71.72 75.41 94.05 98.80 107.44 113.08 121.05

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

19.07 21.17 26.31 28.60 30.85 33.11 35.35

38.42 42.65 53.01 57.62 62.15 66.71 71.22

0.92 0.92 0.95 0.95 1.03 1.03 1.03

23.49 23.49 24.26 24.26 26.30 26.30 26.30

nr nr nr nr nr nr nr

61.91 66.14 77.26 81.88 88.45 93.01 97.52

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

21.75 24.27 26.80 29.32 31.85 34.37 36.90

43.82 48.90 53.99 59.07 64.17 69.24 74.34

1.10 1.10 1.16 1.16 1.18 1.18 1.18

28.09 28.09 29.62 29.62 30.13 30.13 30.13

nr nr nr nr nr nr nr

71.91 76.99 83.61 88.69 94.30 99.38 104.47

12.02 12.82 13.60 14.33 15.05 15.91 16.63

24.22 25.83 27.40 28.87 30.32 32.05 33.50

1.27 1.27 1.27 1.27 1.37 1.37 1.37

32.43 32.43 32.43 32.43 34.98 34.98 34.98

m m m m m m m

56.65 58.26 59.83 61.30 65.30 67.04 68.49

10.53 11.36 12.18 13.01 13.83 14.65 15.48

21.21 22.89 24.54 26.21 27.86 29.51 31.19

0.38 0.38 0.38 0.58 0.58 0.58 0.58

9.70 9.70 9.70 14.81 14.81 14.81 14.81

nr nr nr nr nr nr nr

30.92 32.59 34.24 41.02 42.67 44.33 46.00

Ductwork 401 to 600mm longest side Sum of two sides 600mm Sum of two sides 700mm Sum of two sides 800mm Sum of two sides 900mm Sum of two sides 1000mm Sum of two sides 1100mm Sum of two sides 1200mm Extra over fittings; Ductwork 401 to 600mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

Material Costs/Prices for Measured Works – Mechanical Installations

385

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

24.28 26.03 27.75 29.50 31.24 33.11 34.85

48.92 52.44 55.91 59.43 62.94 66.71 70.21

1.69 1.69 1.92 1.92 2.18 2.18 2.18

43.16 43.16 49.03 49.03 55.67 55.67 55.67

nr nr nr nr nr nr nr

92.07 95.60 104.94 108.46 118.61 122.37 125.88

Offset Sum Sum Sum Sum Sum Sum Sum

two two two two two two two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

33.96 36.46 38.46 40.48 42.73 44.81 46.79

68.42 73.45 77.48 81.55 86.09 90.28 94.27

1.92 1.92 1.92 1.92 2.18 2.18 2.18

49.03 49.03 49.03 49.03 55.67 55.67 55.67

nr nr nr nr nr nr nr

117.45 122.48 126.51 130.58 141.75 145.94 149.93

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

26.00 28.00 29.97 31.97 33.97 35.99 37.99

52.38 56.41 60.38 64.41 68.44 72.51 76.54

1.33 1.33 1.40 1.40 1.82 1.82 1.82

33.96 33.96 35.75 35.75 46.48 46.48 46.48

nr nr nr nr nr nr nr

86.34 90.37 96.13 100.16 114.91 118.98 123.01

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

23.60 24.90 26.78 28.69 30.30 32.31 34.23

47.55 50.16 53.95 57.80 61.04 65.09 68.96

1.16 1.16 1.22 1.22 1.40 1.40 1.40

29.62 29.62 31.15 31.15 35.75 35.75 35.75

nr nr nr nr nr nr nr

77.17 79.79 85.11 88.95 96.79 100.84 104.71

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

24.98 26.52 28.35 30.21 31.91 33.89 35.75

50.33 53.43 57.12 60.86 64.29 68.28 72.02

1.16 1.39 1.46 1.46 1.88 1.88 1.88

29.62 35.49 37.28 37.28 48.01 48.01 48.01

nr nr nr nr nr nr nr

79.95 88.92 94.40 98.15 112.30 116.28 120.03

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

39.76 42.08 45.36 48.69 51.68 55.15 58.55

80.10 84.78 91.38 98.09 104.12 111.11 117.96

1.39 2.16 2.26 2.26 3.01 3.01 3.01

35.49 55.16 57.71 57.71 76.86 76.86 76.86

nr nr nr nr nr nr nr

115.60 139.93 149.10 155.80 180.98 187.97 194.82

of of of of of of of

two two two two two two two

Material Costs/Prices for Measured Works – Mechanical Installations

386

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 401 to 600mm longest side – cont'd Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

31.26 33.56 35.87 38.17 40.47 42.86 45.16

62.98 67.61 72.27 76.90 81.53 86.35 90.98

1.03 1.03 1.03 1.03 1.29 1.29 1.29

26.30 26.30 26.30 26.30 32.94 32.94 32.94

nr nr nr nr nr nr nr

89.28 93.91 98.57 103.20 114.47 119.29 123.92

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

32.33 34.94 37.54 40.15 42.76 45.37 47.97

65.13 70.39 75.63 80.89 86.15 91.40 96.64

1.18 1.18 1.18 1.18 1.44 1.44 1.44

30.13 30.13 30.13 30.13 36.77 36.77 36.77

nr nr nr nr nr nr nr

95.27 100.52 105.76 111.02 122.92 128.18 133.41

16.33 17.05 17.78 18.63 19.36 20.08 20.81 21.54

32.90 34.35 35.82 37.53 39.00 40.45 41.92 43.40

1.27 1.37 1.37 1.37 1.40 1.40 1.48 1.55

32.43 34.98 34.98 34.98 35.75 35.75 37.79 39.58

m m m m m m m m

65.33 69.33 70.80 72.52 74.75 76.20 79.72 82.98

Ductwork 601 to 800mm longest side Sum of two sides 900mm Sum of two sides 1000mm Sum of two sides 1100mm Sum of two sides 1200mm Sum of two sides 1300mm Sum of two sides 1400mm Sum of two sides 1500mm Sum of two sides 1600mm Extra over fittings: Ductwork 601 to 800mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

13.01 13.83 14.65 15.48 16.30 17.01 19.80 22.58

26.21 27.86 29.51 31.19 32.84 34.27 39.89 45.49

0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58

14.81 14.81 14.81 14.81 14.81 14.81 14.81 14.81

nr nr nr nr nr nr nr nr

41.02 42.67 44.33 46.00 47.65 49.08 54.70 60.30

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

29.78 31.53 33.27 35.14 36.88 38.38 44.06 49.73

60.00 63.52 67.03 70.79 74.30 77.32 88.77 100.19

1.92 2.18 2.18 2.18 2.30 2.30 2.47 2.47

49.03 55.67 55.67 55.67 58.73 58.73 63.07 63.07

nr nr nr nr nr nr nr nr

109.03 119.19 122.70 126.46 133.03 136.06 151.84 163.26

Material Costs/Prices for Measured Works – Mechanical Installations

387

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Offset Sum Sum Sum Sum Sum Sum Sum Sum

Net Price £

of of of of of of of of

two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

41.58 43.46 45.33 47.27 49.11 50.90 58.62 66.32

83.77 87.56 91.32 95.23 98.94 102.55 118.10 133.61

1.92 2.18 2.18 2.18 2.30 2.30 2.47 2.47

49.03 55.67 55.67 55.67 58.73 58.73 63.07 63.07

nr nr nr nr nr nr nr nr

132.80 143.23 146.99 150.90 157.67 161.28 181.17 196.69

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

31.71 33.70 35.70 37.73 39.72 41.41 48.32 55.23

63.88 67.89 71.92 76.01 80.02 83.43 97.35 111.27

1.40 1.82 1.82 1.82 2.15 2.15 2.38 2.38

35.75 46.48 46.48 46.48 54.90 54.90 60.78 60.78

nr nr nr nr nr nr nr nr

99.63 114.37 118.40 122.49 134.92 138.33 158.12 172.04

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

27.00 28.94 30.88 32.88 34.82 36.14 42.01 47.88

54.40 58.30 62.21 66.24 70.15 72.81 84.64 96.46

1.22 1.40 1.40 1.40 1.91 1.91 2.11 2.11

31.15 35.75 35.75 35.75 48.77 48.77 53.88 53.88

nr nr nr nr nr nr nr nr

85.55 94.05 97.96 101.99 118.92 121.58 138.52 150.34

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

29.79 31.66 33.52 35.51 37.88 38.81 44.61 50.40

60.02 63.78 67.53 71.54 76.31 78.19 89.87 101.54

1.22 1.40 1.88 1.88 2.26 2.26 2.49 2.49

31.15 35.75 48.01 48.01 57.71 57.71 63.58 63.58

nr nr nr nr nr nr nr nr

91.17 99.53 115.54 119.55 134.03 135.90 153.46 165.12

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

46.01 49.62 53.23 56.90 60.51 63.32 72.89 82.46

92.69 99.97 107.24 114.63 121.91 127.57 146.85 166.13

1.22 1.40 3.01 3.01 3.67 3.67 4.07 4.07

31.15 35.75 76.86 76.86 93.72 93.72 103.93 103.93

nr nr nr nr nr nr nr nr

123.85 135.72 184.10 191.50 215.62 221.28 250.78 270.06

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

39.15 41.49 43.84 46.28 48.63 50.66 58.24 65.83

78.87 83.59 88.32 93.24 97.97 102.06 117.33 132.62

1.22 1.40 1.29 1.29 1.39 1.39 1.64 1.64

31.15 35.75 32.94 32.94 35.49 35.49 41.88 41.88

nr nr nr nr nr nr nr nr

110.03 119.34 121.26 126.18 133.47 137.56 159.21 174.50

two two two two two two two two

two two two two two two two two

sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

388

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings: Ductwork 601 to 800mm longest side – cont'd Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

Ductwork 801 to 1000mm longest side Sum of two sides 1100mm Sum of two sides 1200mm Sum of two sides 1300mm Sum of two sides 1400mm Sum of two sides 1500mm Sum of two sides 1600mm Sum of two sides 1700mm Sum of two sides 1800mm Sum of two sides 1900mm Sum of two sides 2000mm

40.15 42.76 45.37 47.97 50.58 52.82 61.32 69.82

80.89 86.15 91.40 96.64 101.90 106.41 123.54 140.66

1.22 1.40 1.44 1.44 1.69 1.69 1.79 1.79

31.15 35.75 36.77 36.77 43.16 43.16 45.71 45.71

nr nr nr nr nr nr nr nr

112.04 121.90 128.18 133.41 145.06 149.57 169.25 186.37

25.70 27.12 28.54 30.08 31.49 32.91 34.33 35.87 37.29 38.70

51.78 54.64 57.50 60.60 63.44 66.30 69.16 72.27 75.13 77.97

1.37 1.37 1.40 1.40 1.48 1.55 1.55 1.61 1.61 1.61

34.98 34.98 35.75 35.75 37.79 39.58 39.58 41.11 41.11 41.11

m m m m m m m m m m

86.76 89.62 93.25 96.35 101.23 105.88 108.74 113.38 116.24 119.08

Extra over fittings; Ductwork 801 to 1000mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

14.65 15.48 16.30 17.01 19.80 22.58 25.37 28.16 30.95 33.74

29.51 31.19 32.84 34.27 39.89 45.49 51.11 56.73 62.35 67.97

1.44 1.44 1.44 1.44 1.44 1.44 1.44 1.44 1.44 1.44

36.77 36.77 36.77 36.77 36.77 36.77 36.77 36.77 36.77 36.77

nr nr nr nr nr nr nr nr nr nr

66.29 67.96 69.61 71.04 76.66 82.26 87.88 93.50 99.13 104.75

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

27.63 28.95 30.27 31.45 36.70 41.95 47.20 52.55 57.80 63.05

55.66 58.32 60.98 63.36 73.94 84.51 95.09 105.87 116.45 127.02

1.44 1.44 1.69 1.69 2.47 2.47 2.47 2.59 2.71 2.71

36.77 36.77 43.16 43.16 63.07 63.07 63.07 66.14 69.20 69.20

nr nr nr nr nr nr nr nr nr nr

92.44 95.10 104.14 106.52 137.01 147.59 158.17 172.01 185.65 196.23

Material Costs/Prices for Measured Works – Mechanical Installations

389

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

Net Price £

of of of of of of of of of of

two two two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

42.70 43.55 44.28 44.61 50.98 57.24 63.38 69.44 76.19 81.99

86.03 87.74 89.21 89.87 102.71 115.32 127.69 139.90 153.50 165.18

1.44 1.44 1.69 1.69 2.47 2.47 2.59 2.61 2.71 2.71

36.77 36.77 43.16 43.16 63.07 63.07 66.14 66.65 69.20 69.20

nr nr nr nr nr nr nr nr nr nr

122.80 124.51 132.36 133.03 165.78 178.39 193.83 206.55 222.70 234.38

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

29.96 31.54 33.11 34.40 40.87 47.36 53.84 60.33 66.81 73.30

60.36 63.54 66.71 69.30 82.34 95.41 108.47 121.54 134.60 147.67

1.44 1.44 1.69 1.69 2.38 2.38 2.55 2.55 2.83 2.83

36.77 36.77 43.16 43.16 60.78 60.78 65.12 65.12 72.27 72.27

nr nr nr nr nr nr nr nr nr nr

97.13 100.31 109.86 112.46 143.11 156.19 173.59 186.66 206.87 219.94

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

22.12 23.69 25.25 26.62 32.11 37.60 43.09 48.63 53.16 58.65

44.56 47.73 50.87 53.63 64.69 75.75 86.81 97.97 107.10 118.16

1.44 1.44 1.69 1.69 2.11 2.11 2.26 2.26 2.48 2.48

36.77 36.77 43.16 43.16 53.88 53.88 57.71 57.71 63.33 63.33

nr nr nr nr nr nr nr nr nr nr

81.34 84.50 94.03 96.79 118.57 129.63 144.52 155.68 170.43 181.49

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

28.84 30.51 32.17 33.70 39.29 44.88 50.47 56.17 61.26 66.85

58.10 61.47 64.81 67.89 79.16 90.42 101.68 113.16 123.42 134.68

1.44 1.44 1.69 1.69 2.49 2.49 2.67 2.67 3.06 3.06

36.77 36.77 43.16 43.16 63.58 63.58 68.18 68.18 78.14 78.14

nr nr nr nr nr nr nr nr nr nr

94.87 98.24 107.97 111.05 142.74 154.00 169.86 181.34 201.56 212.82

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

390

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 801 to 1000mm longest side – cont'd 90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

46.16 49.29 52.41 55.20 64.22 73.24 82.25 91.29 99.25 108.30

93.00 99.30 105.59 111.21 129.38 147.55 165.71 183.92 199.95 218.19

1.44 1.44 1.69 1.69 4.07 4.07 2.80 2.67 2.95 2.95

36.77 36.77 43.16 43.16 103.93 103.93 71.50 68.18 75.33 75.33

nr nr nr nr nr nr nr nr nr nr

129.77 136.07 148.74 154.36 233.31 251.48 237.21 252.10 275.29 293.52

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

43.93 46.28 48.63 50.74 58.33 65.91 73.49 81.17 88.75 96.34

88.50 93.24 97.97 102.22 117.51 132.79 148.06 163.53 178.80 194.09

1.44 1.44 1.64 1.64 1.64 1.64 1.69 1.69 1.85 1.85

36.77 36.77 41.88 41.88 41.88 41.88 43.16 43.16 47.24 47.24

nr nr nr nr nr nr nr nr nr nr

125.28 130.01 139.85 144.10 159.39 174.66 191.21 206.68 226.04 241.33

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

45.37 47.97 50.58 52.82 61.32 69.82 78.32 86.81 95.31 103.81

91.40 96.64 101.90 106.41 123.54 140.66 157.79 174.89 192.02 209.14

1.44 1.44 1.69 1.69 1.79 1.79 1.86 2.02 2.02 2.02

36.77 36.77 43.16 43.16 45.71 45.71 47.50 51.58 51.58 51.58

nr nr nr nr nr nr nr nr nr nr

128.18 133.41 145.06 149.57 169.25 186.37 205.28 226.47 243.60 260.72

34.19 35.95 37.56 39.30 40.92 42.53 44.15 45.89 47.50 49.12 51.00 52.61 54.35

68.88 72.43 75.67 79.18 82.44 85.68 88.95 92.45 95.70 98.96 102.75 105.99 109.50

1.40 1.40 1.48 1.55 1.55 1.61 1.61 1.61 2.17 2.19 2.19 2.38 2.38

35.75 35.75 37.79 39.58 39.58 41.11 41.11 41.11 55.41 55.92 55.92 60.78 60.78

m m m m m m m m m m m m m

104.63 108.18 113.46 118.76 122.02 126.80 130.06 133.57 151.11 154.88 158.67 166.77 170.27

Ductwork 1001 to 1250mm longest side Sum of two sides 1300mm Sum of two sides 1400mm Sum of two sides 1500mm Sum of two sides 1600mm Sum of two sides 1700mm Sum of two sides 1800mm Sum of two sides 1900mm Sum of two sides 2000mm Sum of two sides 2100mm Sum of two sides 2200mm Sum of two sides 2300mm Sum of two sides 2400mm Sum of two sides 2500mm

Material Costs/Prices for Measured Works – Mechanical Installations

391

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over fittings; Ductwork 1001 to 1250mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

16.54 17.26 20.07 22.88 25.68 28.49 31.30 34.10 36.91 39.72 42.53 45.33 48.14

33.32 34.77 40.43 46.10 51.74 57.40 63.06 68.70 74.36 80.02 85.68 91.32 96.99

1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69 1.69

43.16 43.16 43.16 43.16 43.16 43.16 43.16 43.16 43.16 43.16 43.16 43.16 43.16

nr nr nr nr nr nr nr nr nr nr nr nr nr

76.48 77.93 83.59 89.25 94.89 100.55 106.21 111.86 117.52 123.18 128.84 134.48 140.14

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

29.37 30.44 35.68 41.02 46.27 51.51 56.75 62.09 67.33 72.58 77.92 83.16 88.50

59.17 61.33 71.88 82.64 93.22 103.77 114.33 125.09 135.65 146.22 156.98 167.54 178.30

1.69 1.69 2.47 2.47 2.47 2.59 2.71 2.59 2.92 2.92 2.92 3.12 3.12

43.16 43.16 63.07 63.07 63.07 66.14 69.20 66.14 74.57 74.57 74.57 79.67 79.67

nr nr nr nr nr nr nr nr nr nr nr nr nr

102.33 104.48 134.96 145.71 156.29 169.91 183.53 191.23 210.21 220.79 231.55 247.21 257.97

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

58.04 59.95 67.22 74.45 81.46 88.36 95.14 101.84 108.37 115.82 124.33 132.80 141.31

116.93 120.78 135.42 149.99 164.11 178.01 191.67 205.17 218.33 233.34 250.48 267.55 284.69

1.69 1.69 2.47 2.47 2.59 2.61 2.71 2.71 2.92 3.26 3.26 3.48 3.48

43.16 43.16 63.07 63.07 66.14 66.65 69.20 69.20 74.57 83.25 83.25 88.87 88.87

nr nr nr nr nr nr nr nr nr nr nr nr nr

160.09 163.93 198.50 213.06 230.25 244.66 260.88 274.37 292.89 316.58 333.73 356.41 373.56

of of of of of of of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

392

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 1001 to 1250mm longest side – cont'd Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

31.93 33.20 39.67 46.16 52.64 59.11 65.58 72.07 78.54 85.02 91.50 97.98 104.46

64.33 66.89 79.92 93.00 106.05 119.09 132.12 145.20 158.23 171.29 184.34 197.40 210.45

1.69 1.69 2.38 2.38 2.55 2.55 2.83 2.83 3.85 4.18 4.22 4.68 4.70

43.16 43.16 60.78 60.78 65.12 65.12 72.27 72.27 98.31 106.74 107.76 119.51 120.02

nr nr nr nr nr nr nr nr nr nr nr nr nr

107.48 110.04 140.70 153.77 171.17 184.20 204.39 217.46 256.54 278.03 292.10 316.90 330.47

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

20.71 21.03 26.64 32.28 37.89 43.50 49.10 54.75 60.35 65.96 69.16 74.76 80.38

41.72 42.37 53.67 65.03 76.34 87.64 98.92 110.30 121.58 132.89 139.33 150.62 161.94

1.69 1.69 2.11 2.11 2.19 2.19 2.48 2.26 2.48 2.48 2.48 3.90 3.90

43.16 43.16 53.88 53.88 55.92 55.92 63.33 57.71 63.33 63.33 63.33 99.59 99.59

nr nr nr nr nr nr nr nr nr nr nr nr nr

84.88 85.52 107.55 118.91 132.26 143.56 162.25 168.01 184.91 196.22 202.66 250.21 261.53

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

30.02 30.93 36.59 42.34 48.00 53.66 59.32 65.07 70.73 76.40 80.89 86.54 92.29

60.48 62.31 73.72 85.30 96.70 108.11 119.51 131.09 142.50 153.92 162.97 174.35 185.93

1.69 1.69 2.49 2.49 2.67 2.67 3.06 3.06 4.05 4.05 4.39 4.85 4.85

43.16 43.16 63.58 63.58 68.18 68.18 78.14 78.14 103.42 103.42 112.10 123.85 123.85

nr nr nr nr nr nr nr nr nr nr nr nr nr

103.64 105.47 137.30 148.88 164.88 176.29 197.65 209.23 245.92 257.34 275.07 298.20 309.78

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

393

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

62.75 65.33 75.78 86.23 96.68 107.12 117.58 128.03 138.47 148.92 156.61 167.13 177.64

126.42 131.62 152.67 173.72 194.78 215.81 236.88 257.94 278.97 300.02 315.51 336.71 357.88

1.69 1.69 2.80 2.80 2.95 2.95 4.05 4.05 4.07 4.07 4.39 4.85 4.85

43.16 43.16 71.50 71.50 75.33 75.33 103.42 103.42 103.93 103.93 112.10 123.85 123.85

nr nr nr nr nr nr nr nr nr nr nr nr nr

169.58 174.77 224.17 245.22 270.11 291.14 340.30 361.36 382.90 403.95 427.62 460.56 481.73

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

49.63 51.71 59.35 67.08 74.72 82.36 89.99 97.72 105.36 113.00 120.73 128.37 136.10

99.99 104.18 119.57 135.14 150.53 165.93 181.30 196.87 212.26 227.66 243.23 258.62 274.19

1.44 1.44 1.64 1.64 1.64 1.64 1.69 1.69 1.85 1.85 2.61 2.61 2.61

36.77 36.77 41.88 41.88 41.88 41.88 43.16 43.16 47.24 47.24 66.65 66.65 66.65

nr nr nr nr nr nr nr nr nr nr nr nr nr

136.76 140.95 161.45 177.02 192.41 207.81 224.45 240.03 259.51 274.90 309.88 325.27 340.84

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

51.78 54.12 62.71 71.30 79.89 88.48 97.08 105.66 114.26 122.84 131.44 140.02 148.62

104.32 109.03 126.34 143.64 160.95 178.26 195.58 212.87 230.19 247.48 264.81 282.09 299.42

1.79 1.79 1.79 1.79 1.86 2.02 2.02 2.02 2.61 2.61 2.61 2.88 2.88

45.71 45.71 45.71 45.71 47.50 51.58 51.58 51.58 66.65 66.65 66.65 73.54 73.54

nr nr nr nr nr nr nr nr nr nr nr nr nr

150.03 154.74 172.05 189.35 208.45 229.84 247.16 264.45 296.84 314.13 331.45 355.63 372.96

53.70 55.68 57.68 59.56 61.44 63.32 65.32 67.30 69.18 71.06 72.94 74.92 84.07 85.95 87.93 89.81

108.19 112.18 116.20 119.99 123.78 127.57 131.60 135.59 139.37 143.16 146.95 150.94 169.37 173.16 177.15 180.94

1.55 1.61 1.61 1.61 2.17 2.19 2.19 2.38 2.38 2.64 2.66 2.95 2.96 3.15 3.15 3.18

39.58 41.11 41.11 41.11 55.41 55.92 55.92 60.78 60.78 67.42 67.93 75.33 75.59 80.44 80.44 81.20

m m m m m m m m m m m m m m m m

147.77 153.29 157.32 161.11 179.19 183.49 187.52 196.36 200.15 210.58 214.87 226.27 244.96 253.60 257.59 262.14

Ductwork 1251 to 1600mm longest side Sum of two sides 1700mm Sum of two sides 1800mm Sum of two sides 1900mm Sum of two sides 2000mm Sum of two sides 2100mm Sum of two sides 2200mm Sum of two sides 2300mm Sum of two sides 2400mm Sum of two sides 2500mm Sum of two sides 2600mm Sum of two sides 2700mm Sum of two sides 2800mm Sum of two sides 2900mm Sum of two sides 3000mm Sum of two sides 3100mm Sum of two sides 3200mm

Material Costs/Prices for Measured Works – Mechanical Installations

394

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 1251 to 1600mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

25.68 28.49 31.30 34.10 36.91 39.72 42.53 45.33 48.14 50.95 53.76 56.56 59.37 93.23 64.40 66.41

51.74 57.40 63.06 68.70 74.36 80.02 85.68 91.32 96.99 102.65 108.31 113.95 119.61 375.65 129.74 133.79

0.58 0.58 0.58 0.58 0.87 0.87 0.87 0.87 0.87 0.87 0.87 1.16 1.16 1.73 1.80 1.80

14.81 14.81 14.81 14.81 22.22 22.22 22.22 22.22 22.22 22.22 22.22 29.62 29.62 44.18 45.96 45.96

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

66.55 72.21 77.87 83.51 96.58 102.24 107.90 113.54 119.20 124.86 130.52 143.57 149.23 419.83 175.71 179.76

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

31.60 36.50 41.46 46.34 51.22 56.10 61.05 65.96 70.83 75.72 80.59 85.50 84.73 89.61 93.23 96.53

63.66 73.53 83.53 93.36 103.19 113.02 122.99 132.89 142.70 152.55 162.36 172.25 170.70 180.53 187.83 194.47

2.47 2.59 2.71 2.71 2.92 2.92 2.92 3.12 3.12 3.12 3.12 3.95 3.97 4.52 4.52 4.52

63.07 66.14 69.20 69.20 74.57 74.57 74.57 79.67 79.67 79.67 79.67 100.87 101.38 115.42 115.42 115.42

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

126.74 139.67 152.73 162.56 177.76 187.59 197.56 212.56 222.37 232.22 242.03 273.12 272.08 295.96 303.25 309.90

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

80.42 89.41 95.51 101.37 107.06 112.59 117.99 126.59 131.72 140.20 148.68 157.20 157.18 165.65 172.25 178.36

162.02 180.13 192.42 204.23 215.69 226.83 237.71 255.03 265.37 282.45 299.54 316.70 316.66 333.73 347.02 359.33

2.59 2.61 2.71 2.71 2.92 3.26 3.26 3.47 3.48 3.49 3.50 4.34 4.76 5.32 5.35 5.35

66.14 66.65 69.20 69.20 74.57 83.25 83.25 88.61 88.87 89.12 89.38 110.83 121.55 135.85 136.62 136.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

228.16 246.78 261.62 273.43 290.25 310.08 320.96 343.64 354.24 371.57 388.91 427.53 438.21 469.58 483.64 495.95

of of of of of of of of of of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

395

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

37.97 44.10 50.20 56.31 62.42 68.53 74.63 80.77 86.89 93.00 99.11 105.24 105.62 111.73 116.30 120.43

76.50 88.85 101.14 113.44 125.75 138.06 150.35 162.72 175.05 187.36 199.67 212.02 212.79 225.10 234.30 242.62

2.55 2.55 2.83 2.83 3.85 4.18 4.22 4.68 4.70 4.70 4.71 8.19 8.62 8.75 8.75 8.75

65.12 65.12 72.27 72.27 98.31 106.74 107.76 119.51 120.02 120.02 120.27 209.14 220.12 223.44 223.44 223.44

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

141.61 153.96 173.40 185.71 224.07 244.80 258.12 282.23 295.07 307.38 319.95 421.16 432.91 448.54 457.74 466.06

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

78.08 85.55 96.66 107.58 118.51 129.44 140.55 147.70 158.59 169.49 180.39 187.29 187.49 198.35 206.72 214.42

157.30 172.35 194.74 216.74 238.76 260.78 283.16 297.56 319.50 341.46 363.42 377.32 377.73 399.61 416.47 431.98

2.19 2.19 2.26 2.26 2.48 2.48 2.48 3.90 3.90 4.26 4.55 4.55 6.87 7.00 7.00 7.00

55.92 55.92 57.71 57.71 63.33 63.33 63.33 99.59 99.59 108.78 116.19 116.19 175.43 178.75 178.75 178.75

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

213.23 228.28 252.45 274.45 302.09 324.11 346.49 397.15 419.09 450.25 479.61 493.51 553.16 578.36 595.22 610.73

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

37.44 41.12 46.66 52.12 57.57 63.03 68.57 72.09 77.53 82.97 88.42 91.81 91.54 96.96 101.13 104.97

75.43 82.84 94.00 105.00 115.98 126.98 138.14 145.24 156.20 167.16 178.14 184.97 184.42 195.34 203.74 211.48

2.67 2.67 3.06 3.06 4.05 4.05 4.39 4.85 4.85 4.87 4.87 8.81 8.81 9.31 9.31 9.39

68.18 68.18 78.14 78.14 103.42 103.42 112.10 123.85 123.85 124.36 124.36 224.97 224.97 237.74 237.74 239.78

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

143.61 151.02 172.14 183.14 219.40 230.40 250.25 269.09 280.05 291.52 302.50 409.94 409.39 433.08 441.48 451.26

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

396

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 1251 to 1600mm longest side – cont'd 90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

84.85 90.66 101.29 111.96 122.61 133.28 143.91 149.73 160.43 171.14 181.85 187.60 188.47 199.22 208.03 216.40

170.94 182.65 204.06 225.56 247.02 268.51 289.93 301.65 323.21 344.79 366.36 377.95 379.70 401.36 419.11 435.97

2.67 2.80 2.95 2.95 4.05 4.05 4.39 4.85 4.85 4.87 4.87 8.81 14.81 15.20 15.60 15.60

68.18 71.50 75.33 75.33 103.42 103.42 112.10 123.85 123.85 124.36 124.36 224.97 378.19 388.15 398.36 398.36

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

239.12 254.15 279.40 300.89 350.44 371.93 402.03 425.50 447.06 469.15 490.72 602.92 757.89 789.51 817.47 834.33

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

74.72 82.36 90.08 97.72 105.36 113.00 120.73 148.62 136.01 143.65 151.29 158.93 166.66 174.30 180.37 185.90

150.53 165.93 181.48 196.87 212.26 227.66 243.23 299.42 274.01 289.40 304.80 320.19 335.76 351.15 363.38 374.52

1.69 1.69 1.85 1.85 2.61 2.61 2.61 2.88 2.88 2.88 2.88 3.94 3.94 4.83 4.83 4.83

43.16 43.16 47.24 47.24 66.65 66.65 66.65 73.54 73.54 73.54 73.54 100.61 100.61 123.34 123.34 123.34

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

193.69 209.08 228.72 244.11 278.91 294.30 309.88 372.96 347.56 362.95 378.34 420.80 436.37 474.49 486.72 497.86

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

397

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

Material £

Labour hours

Labour £

Unit

Total rate £

79.89 88.48 97.08 105.66 114.26 122.84 131.44 140.02 148.62 157.21 165.80 174.39 182.98 191.57 198.40 204.62

160.95 178.26 195.58 212.87 230.19 247.48 264.81 282.09 299.42 316.72 334.03 351.33 368.64 385.95 399.71 412.24

1.86 2.02 2.02 2.02 2.61 2.61 2.61 2.88 2.88 2.88 2.88 3.94 4.12 5.00 5.00 5.00

47.50 51.58 51.58 51.58 66.65 66.65 66.65 73.54 73.54 73.54 73.54 100.61 105.21 127.68 127.68 127.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

208.45 229.84 247.16 264.45 296.84 314.13 331.45 355.63 372.96 390.27 407.57 451.95 473.85 513.63 527.39 539.92

69.29 71.37 73.46 75.51 77.61 79.58 81.55 83.52 85.62 87.59 95.03 97.01 106.39 108.36 110.33 112.30 114.40 116.37 118.34 120.31

139.60 143.79 148.00 152.13 156.36 160.33 164.29 168.26 172.49 176.46 191.45 195.44 214.34 218.31 222.28 226.25 230.48 234.44 238.41 242.38

2.17 2.17 2.19 2.38 2.38 2.64 2.66 2.95 2.96 2.96 2.96 3.15 3.15 3.15 3.15 3.18 3.18 3.18 3.18 3.18

55.41 55.41 55.92 60.78 60.78 67.42 67.93 75.33 75.59 75.59 75.59 80.44 80.44 80.44 80.44 81.20 81.20 81.20 81.20 81.20

m m m m m m m m m m m m m m m m m m m m

195.01 199.20 203.92 212.90 217.13 227.74 232.22 243.59 248.08 252.05 267.04 275.88 294.78 298.75 302.71 307.45 311.68 315.65 319.62 323.59

Ductwork 1601 to 2000mm longest side Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of of of of of of of of of

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

Material Costs/Prices for Measured Works – Mechanical Installations

398

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 1601 to 2000mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

36.91 39.72 42.53 45.33 48.14 50.95 53.76 56.56 59.37 62.18 64.40 66.41 68.43 70.44 72.46 74.47 76.49 78.50 80.51 82.53

74.36 80.02 85.68 91.32 96.99 102.65 108.31 113.95 119.61 125.27 129.74 133.79 137.86 141.91 145.98 150.03 154.10 158.15 162.20 166.27

0.87 0.87 0.87 0.87 0.87 0.87 0.87 1.16 1.16 1.73 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80

22.22 22.22 22.22 22.22 22.22 22.22 22.22 29.62 29.62 44.18 45.96 45.96 45.96 45.96 45.96 45.96 45.96 45.96 45.96 45.96

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

96.58 102.24 107.90 113.54 119.20 124.86 130.52 143.57 149.23 169.45 175.71 179.76 183.83 187.88 191.95 196.00 200.07 204.11 208.16 212.23

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

51.07 55.91 60.81 65.57 70.48 75.30 80.13 84.96 89.86 94.69 93.97 97.21 94.70 97.94 101.18 104.43 112.85 116.09 119.33 122.58

102.89 112.64 122.51 132.10 141.99 151.70 161.43 171.16 181.04 190.77 189.32 195.84 190.79 197.31 203.84 210.39 227.35 233.88 240.41 246.96

2.61 2.61 2.61 2.88 3.12 3.12 3.12 3.95 3.97 4.52 4.52 4.52 4.52 4.52 4.52 4.52 4.52 4.52 4.52 4.52

66.65 66.65 66.65 73.54 79.67 79.67 79.67 100.87 101.38 115.42 115.42 115.42 115.42 115.42 115.42 115.42 115.42 115.42 115.42 115.42

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

169.54 179.29 189.16 205.64 221.66 231.38 241.11 272.03 282.41 306.19 304.74 311.27 306.21 312.74 319.26 325.81 342.78 349.30 355.83 362.38

Material Costs/Prices for Measured Works – Mechanical Installations

399

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

Net Price £

of of of of of of of of of of of of of of of of of of of of

two two two two two two two two two two two two two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

119.62 128.67 133.93 146.78 151.87 156.70 161.35 165.83 170.17 174.28 174.53 180.67 178.15 184.30 190.45 196.60 207.88 214.03 220.18 226.32

240.99 259.23 269.82 295.71 305.96 315.70 325.06 334.09 342.83 351.11 351.62 363.99 358.91 371.30 383.69 396.08 418.81 431.20 443.59 455.96

2.61 2.61 2.61 2.88 3.48 3.49 3.50 4.34 4.76 5.32 5.35 5.35 5.35 5.35 5.35 5.35 5.35 5.35 5.35 5.35

66.65 66.65 66.65 73.54 88.87 89.12 89.38 110.83 121.55 135.85 136.62 136.62 136.62 136.62 136.62 136.62 136.62 136.62 136.62 136.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

307.64 325.87 336.47 369.25 394.83 404.82 414.44 444.92 464.38 486.96 488.23 500.60 495.53 507.92 520.31 532.70 555.42 567.81 580.20 592.57

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

76.93 84.35 91.75 99.20 106.60 114.01 121.42 128.83 136.22 143.63 144.91 149.94 149.13 154.16 159.19 164.22 171.80 176.83 181.86 186.90

154.99 169.94 184.84 199.85 214.76 229.69 244.62 259.55 274.44 289.36 291.94 302.08 300.44 310.58 320.71 330.85 346.12 356.25 366.38 376.54

2.61 2.61 2.61 2.88 4.70 4.70 4.71 8.19 8.19 8.19 8.19 8.19 8.19 8.62 8.62 8.62 8.62 8.75 8.75 8.75

66.65 66.65 66.65 73.54 120.02 120.02 120.27 209.14 209.14 209.14 209.14 209.14 209.14 220.12 220.12 220.12 220.12 223.44 223.44 223.44

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

221.64 236.58 251.49 273.40 334.78 349.71 364.89 468.69 483.58 498.50 501.08 511.22 509.58 530.70 540.83 550.97 566.24 579.69 589.82 599.98

Material Costs/Prices for Measured Works – Mechanical Installations

400

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 1601 to 2000mm longest side – cont'd 90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

108.17 208.74 225.83 231.92 248.95 265.69 282.42 299.15 316.19 332.93 336.14 348.12 347.07 359.05 371.03 383.01 410.60 422.58 434.56 446.54

217.92 420.54 454.97 467.24 501.55 535.27 568.98 602.68 637.01 670.74 677.20 701.34 699.22 723.36 747.50 771.63 827.22 851.35 875.49 899.62

2.61 2.61 2.61 2.88 3.90 4.26 4.55 4.55 6.87 6.87 6.87 6.87 6.87 7.00 7.00 7.00 7.00 7.00 7.00 7.00

66.65 66.65 66.65 73.54 99.59 108.78 116.19 116.19 175.43 175.43 175.43 175.43 175.43 178.75 178.75 178.75 178.75 178.75 178.75 178.75

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

284.57 487.19 521.62 540.78 601.14 644.06 685.17 718.87 812.44 846.17 852.64 876.77 874.66 902.11 926.25 950.38 1005.97 1030.10 1054.24 1078.37

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

51.99 149.43 160.93 166.61 178.07 189.31 200.55 211.79 223.26 234.49 248.11 246.18 247.45 255.51 263.58 271.65 290.15 298.22 306.29 314.35

104.74 301.05 324.22 335.66 358.75 381.39 404.04 426.68 449.79 472.42 499.85 495.97 498.53 514.76 531.02 547.28 584.55 600.81 617.07 633.31

2.61 2.61 2.61 2.88 4.85 4.87 4.87 8.81 8.81 9.31 9.31 9.31 9.31 9.31 9.39 9.39 9.39 9.39 9.39 9.39

66.65 66.65 66.65 73.54 123.85 124.36 124.36 224.97 224.97 237.74 237.74 237.74 237.74 237.74 239.78 239.78 239.78 239.78 239.78 239.78

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

171.39 367.70 390.87 409.20 482.60 505.75 528.40 651.65 674.76 710.16 737.60 733.71 736.27 752.50 770.80 787.06 824.33 840.59 856.85 873.09

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

401

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

244.82 258.78 279.31 286.05 306.63 327.31 347.99 368.67 389.25 409.93 415.05 430.98 434.57 450.50 466.42 482.35 503.27 519.20 535.12 551.05

493.23 521.35 562.71 576.29 617.75 659.42 701.08 742.74 784.20 825.87 836.18 868.27 875.51 907.60 939.67 971.77 1013.91 1046.01 1078.08 1110.17

2.61 2.61 2.61 2.88 4.85 4.87 4.87 8.81 14.81 15.20 15.20 15.20 15.20 15.20 15.60 15.60 15.60 15.60 15.60 15.60

66.65 66.65 66.65 73.54 123.85 124.36 124.36 224.97 378.19 388.15 388.15 388.15 388.15 388.15 398.36 398.36 398.36 398.36 398.36 398.36

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

559.88 588.00 629.36 649.83 741.60 783.78 825.44 967.71 1162.39 1214.01 1224.33 1256.42 1263.65 1295.75 1338.03 1370.13 1412.27 1444.37 1476.44 1508.53

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

108.27 115.91 123.65 131.19 138.93 146.58 154.23 161.88 169.62 177.28 183.36 188.91 194.53 200.07 205.61 211.15 219.33 224.86 230.40 235.94

218.13 233.52 249.11 264.30 279.90 295.31 310.72 326.13 341.72 357.16 369.41 380.59 391.91 403.07 414.23 425.39 441.87 453.01 464.18 475.34

2.61 2.61 2.61 2.88 2.88 2.88 2.88 3.94 3.94 3.94 3.94 3.94 3.94 4.83 4.83 4.83 4.83 4.83 4.83 4.83

66.65 66.65 66.65 73.54 73.54 73.54 73.54 100.61 100.61 100.61 100.61 100.61 100.61 123.34 123.34 123.34 123.34 123.34 123.34 123.34

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

284.78 300.17 315.76 337.85 353.44 368.85 384.26 426.74 442.34 457.77 470.02 481.20 492.52 526.41 537.57 548.73 565.21 576.35 587.51 598.68

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

402

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 1601 to 2000mm longest side – cont'd Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

Ductwork 2001 to 2500mm longest side Sum of two sides 2500mm Sum of two sides 2600mm Sum of two sides 2700mm Sum of two sides 2800mm Sum of two sides 2900mm Sum of two sides 3000mm Sum of two sides 3100mm Sum of two sides 3200mm Sum of two sides 3300mm Sum of two sides 3400mm Sum of two sides 3500mm Sum of two sides 3600mm Sum of two sides 3700mm Sum of two sides 3800mm Sum of two sides 3900mm Sum of two sides 4000mm

114.26 122.84 131.44 140.02 148.62 157.21 165.80 174.39 182.98 191.57 198.40 204.62 210.83 217.05 223.26 229.47 235.68 241.90 248.11 254.33

230.19 247.48 264.81 282.09 299.42 316.72 334.03 351.33 368.64 385.95 399.71 412.24 424.75 437.28 449.79 462.30 474.81 487.34 499.85 512.39

2.61 2.61 2.61 2.88 2.88 2.88 2.88 3.94 4.12 4.12 4.12 4.12 4.12 5.00 5.00 5.00 5.00 5.00 5.00 5.00

66.65 66.65 66.65 73.54 73.54 73.54 73.54 100.61 105.21 105.21 105.21 105.21 105.21 127.68 127.68 127.68 127.68 127.68 127.68 127.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

296.84 314.13 331.45 355.63 372.96 390.27 407.57 451.95 473.85 491.15 504.91 517.45 529.96 564.96 577.47 589.98 602.49 615.02 627.53 640.07

102.76 105.32 107.42 110.22 112.33 114.31 116.39 118.37 120.47 122.46 131.07 133.05 142.57 144.56 146.54 149.25

207.03 212.18 216.41 222.05 226.31 230.29 234.49 238.47 242.70 246.71 264.06 268.05 287.23 291.24 295.23 300.69

2.38 2.64 2.66 2.95 2.96 3.15 3.15 3.15 3.15 3.15 2.66 3.18 3.18 3.18 3.18 3.18

60.78 67.42 67.93 75.33 75.59 80.44 80.44 80.44 80.44 80.44 67.93 81.20 81.20 81.20 81.20 81.20

m m m m m m m m m m m m m m m m

267.80 279.60 284.34 297.39 301.89 310.73 314.92 318.91 323.14 327.15 331.99 349.25 368.43 372.44 376.43 381.89

Material Costs/Prices for Measured Works – Mechanical Installations

403

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over fittings; Ductwork 2001 to 2500mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

48.14 50.95 53.76 56.56 59.37 62.18 64.40 66.41 68.43 70.44 72.46 74.47 76.49 78.50 80.51 82.53

96.99 102.65 108.31 113.95 119.61 125.27 129.74 133.79 137.86 141.91 145.98 150.03 154.10 158.15 162.20 166.27

0.87 0.87 0.87 1.16 1.16 1.73 1.73 1.73 1.73 1.80 1.80 1.80 1.80 1.80 1.80 1.80

22.22 22.22 22.22 29.62 29.62 44.18 44.18 44.18 44.18 45.96 45.96 45.96 45.96 45.96 45.96 45.96

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

119.20 124.86 130.52 143.57 149.23 169.45 173.92 177.97 182.04 187.88 191.95 196.00 200.07 204.11 208.16 212.23

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

57.42 62.23 67.13 71.84 76.74 81.56 85.12 88.36 91.67 94.91 93.39 96.62 94.00 97.23 100.47 103.74

115.68 125.37 135.24 144.73 154.60 164.31 171.49 178.01 184.68 191.21 188.15 194.66 189.38 195.88 202.41 209.00

3.12 3.12 3.12 3.95 3.97 3.97 3.97 3.97 3.97 4.52 4.52 4.52 4.52 4.52 4.52 4.52

79.67 79.67 79.67 100.87 101.38 101.38 101.38 101.38 101.38 115.42 115.42 115.42 115.42 115.42 115.42 115.42

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

195.35 205.04 214.92 245.60 255.98 265.69 272.86 279.39 286.06 306.63 303.57 310.08 304.80 311.31 317.83 324.42

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

144.20 153.24 156.80 171.30 174.69 177.82 178.91 179.29 179.54 179.56 178.34 184.47 181.80 187.93 194.07 200.19

290.51 308.73 315.90 345.11 351.94 358.25 360.44 361.21 361.71 361.75 359.29 371.64 366.26 378.61 390.98 403.31

3.48 3.49 3.50 4.34 4.76 5.32 5.35 5.35 5.32 5.32 5.32 5.35 5.35 5.35 5.35 5.35

88.87 89.12 89.38 110.83 121.55 135.85 136.62 136.62 135.85 135.85 135.85 136.62 136.62 136.62 136.62 136.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

379.38 397.85 405.27 455.94 473.49 494.10 497.06 497.82 497.56 497.60 495.14 508.26 502.88 515.23 527.60 539.93

of of of of of of of of of of of of of of of of

404

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 2001 to 2500mm longest side – cont'd Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

93.28 100.69 108.08 115.49 122.88 130.28 135.84 140.87 145.88 150.91 150.90 155.92 155.00 160.02 165.05 170.04

187.93 202.86 217.74 232.67 247.56 262.47 273.67 283.80 293.90 304.03 304.01 314.12 312.27 322.38 332.52 342.57

4.70 4.70 4.71 8.19 8.19 8.19 8.19 8.62 8.62 8.62 8.62 8.75 8.75 8.75 8.75 8.75

120.02 120.02 120.27 209.14 209.14 209.14 209.14 220.12 220.12 220.12 220.12 223.44 223.44 223.44 223.44 223.44

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

307.95 322.87 338.02 441.81 456.70 471.61 482.81 503.92 514.02 524.15 524.13 537.56 535.71 545.82 555.96 566.01

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

212.75 222.51 239.47 241.51 258.40 275.02 287.89 299.75 311.89 323.75 323.05 334.91 331.14 343.00 354.86 358.12

428.62 448.28 482.45 486.56 520.59 554.07 580.00 603.89 628.35 652.24 650.83 674.73 667.13 691.02 714.92 721.49

3.90 4.26 4.55 4.55 6.87 6.87 6.87 6.87 6.87 6.87 7.00 7.00 7.00 7.00 7.00 7.00

99.59 108.78 116.19 116.19 175.43 175.43 175.43 175.43 175.43 175.43 178.75 178.75 178.75 178.75 178.75 178.75

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

528.21 557.06 598.64 602.75 696.02 729.50 755.43 779.32 803.78 827.68 829.58 853.48 845.88 869.78 893.67 900.24

Material Costs/Prices for Measured Works – Mechanical Installations

405

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

Net Price £

two two two two two two two two two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

159.33 167.00 178.43 182.09 193.48 204.66 213.37 221.38 229.61 237.62 239.28 247.29 247.19 255.20 263.21 266.92

320.99 336.45 359.47 366.85 389.79 412.32 429.87 446.00 462.58 478.72 482.07 498.20 498.00 514.14 530.28 537.75

4.85 4.87 4.87 8.81 8.81 9.31 9.31 9.31 9.31 9.31 9.31 9.39 9.39 9.39 9.39 9.39

123.85 124.36 124.36 224.97 224.97 237.74 237.74 237.74 237.74 237.74 237.74 239.78 239.78 239.78 239.78 239.78

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

444.84 460.81 483.83 591.82 614.77 650.06 667.61 683.74 700.32 716.46 719.81 737.99 737.78 753.92 770.06 777.53

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

260.69 276.72 297.37 298.68 319.37 340.18 357.21 373.28 389.22 405.28 404.66 420.72 421.93 437.99 454.06 458.84

525.20 557.49 599.10 601.74 643.42 685.34 719.65 752.03 784.14 816.50 815.25 847.60 850.04 882.40 914.77 924.40

4.85 4.87 4.87 8.81 14.81 14.81 15.20 15.20 15.20 15.20 15.20 15.60 15.60 15.60 15.60 15.60

123.85 124.36 124.36 224.97 378.19 378.19 388.15 388.15 388.15 388.15 388.15 398.36 398.36 398.36 398.36 398.36

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

649.05 681.85 723.46 826.71 1021.61 1063.53 1107.80 1140.18 1172.29 1204.64 1203.40 1245.97 1248.40 1280.76 1313.13 1322.76

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

139.19 146.83 154.57 162.11 169.85 177.50 183.59 189.13 194.75 200.29 206.11 211.64 217.27 222.81 228.35 233.96

280.42 295.81 311.40 326.59 342.19 357.60 369.87 381.03 392.35 403.51 415.24 426.38 437.72 448.88 460.05 471.35

2.88 2.88 2.88 3.94 3.94 3.94 3.94 3.94 3.94 3.94 4.83 4.83 4.83 4.83 4.83 4.83

73.54 73.54 73.54 100.61 100.61 100.61 100.61 100.61 100.61 100.61 123.34 123.34 123.34 123.34 123.34 123.34

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

353.96 369.35 384.95 427.21 442.80 458.21 470.48 481.64 492.96 504.13 538.58 549.72 561.06 572.22 583.38 594.69

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

406

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 2001 to 2500mm longest side – cont'd Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

Ductwork 2501 to 4000mm longest side Sum of two sides 3000mm Sum of two sides 3100mm Sum of two sides 3200mm Sum of two sides 3300mm Sum of two sides 3400mm Sum of two sides 3500mm Sum of two sides 3600mm Sum of two sides 3700mm Sum of two sides 3800mm Sum of two sides 3900mm Sum of two sides 4000mm Sum of two sides 4100mm Sum of two sides 4200mm Sum of two sides 4300mm Sum of two sides 4400mm Sum of two sides 4500mm

148.62 157.21 165.80 174.39 182.98 191.57 198.40 204.62 210.83 217.05 223.26 229.47 235.68 241.90 248.11 254.33

299.42 316.72 334.03 351.33 368.64 385.95 399.71 412.24 424.75 437.28 449.79 462.30 474.81 487.34 499.85 512.39

2.88 2.88 2.88 3.94 3.94 3.94 4.12 4.12 4.12 4.12 5.00 5.00 5.00 5.00 5.00 5.00

73.54 73.54 73.54 100.61 100.61 100.61 105.21 105.21 105.21 105.21 127.68 127.68 127.68 127.68 127.68 127.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

372.96 390.27 407.57 451.95 469.25 486.56 504.91 517.45 529.96 542.49 577.47 589.98 602.49 615.02 627.53 640.07

168.04 171.97 175.67 179.37 184.13 187.83 191.53 196.40 200.10 211.11 214.81 218.63 222.34 226.03 231.43 235.14

338.54 346.46 353.91 361.37 370.96 378.41 385.87 395.68 403.13 425.31 432.77 440.46 447.94 455.37 466.25 473.72

2.38 2.38 2.38 2.38 2.64 2.66 2.95 2.96 3.15 3.15 3.15 3.35 3.35 3.60 3.60 3.60

60.78 60.78 60.78 60.78 67.42 67.93 75.33 75.59 80.44 80.44 80.44 85.55 85.55 91.93 91.93 91.93

m m m m m m m m m m m m m m m m

399.32 407.24 414.69 422.14 438.37 446.34 461.20 471.26 483.57 505.75 513.21 526.01 533.48 547.30 558.18 565.65

Material Costs/Prices for Measured Works – Mechanical Installations

407

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over fittings; Ductwork 2501 to 4000mm longest side End Cap Sum of two sides 3000mm Sum of two sides 3100mm Sum of two sides 3200mm Sum of two sides 3300mm Sum of two sides 3400mm Sum of two sides 3500mm Sum of two sides 3600mm Sum of two sides 3700mm Sum of two sides 3800mm Sum of two sides 3900mm Sum of two sides 4000mm Sum of two sides 4100mm Sum of two sides 4200mm Sum of two sides 4300mm Sum of two sides 4400mm Sum of two sides 4500mm

62.76 65.00 67.03 69.06 71.09 73.13 75.16 77.20 79.23 81.27 83.30 85.33 87.37 89.40 91.43 93.47

126.44 130.95 135.04 139.13 143.22 147.33 151.42 155.53 159.62 163.73 167.82 171.91 176.02 180.11 184.20 188.31

1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.80 1.80 1.80 1.80 1.88 1.88 1.88

44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18 45.96 45.96 45.96 45.96 48.01 48.01 48.01

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

170.62 175.13 179.22 183.31 187.40 191.51 195.60 199.71 203.80 209.70 213.79 217.87 221.98 228.12 232.21 236.32

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm 4100mm 4200mm 4300mm 4400mm 4500mm

61.08 64.02 66.55 69.08 71.59 74.11 76.64 79.23 81.76 79.50 82.03 84.64 87.17 89.70 92.28 94.80

123.05 128.98 134.07 139.17 144.23 149.31 154.40 159.62 164.72 160.16 165.26 170.52 175.62 180.71 185.91 190.99

3.12 3.12 3.12 3.12 3.12 3.12 3.95 3.97 4.52 4.52 4.52 4.52 4.52 4.92 4.92 5.12

79.67 79.67 79.67 79.67 79.67 79.67 100.87 101.38 115.42 115.42 115.42 115.42 115.42 125.64 125.64 130.74

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

202.73 208.65 213.75 218.84 223.90 228.98 255.27 261.00 280.14 275.59 280.68 285.94 291.04 306.35 311.55 321.73

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm 4100mm 4200mm 4300mm 4400mm 4500mm

177.99 175.15 171.24 166.93 182.91 178.18 173.03 189.49 183.92 194.94 188.43 181.55 174.20 179.20 197.22 189.23

358.59 352.87 344.99 336.31 368.50 358.97 348.59 381.76 370.53 392.74 379.62 365.76 350.95 361.03 397.33 381.23

3.48 3.48 3.48 3.48 3.49 3.50 3.50 4.76 5.32 5.35 5.35 5.85 5.85 6.15 6.15 6.30

88.87 88.87 88.87 88.87 89.12 89.38 89.38 121.55 135.85 136.62 136.62 149.39 149.39 157.05 157.05 160.88

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

447.45 441.73 433.85 425.17 457.62 448.35 437.97 503.31 506.39 529.35 516.24 515.15 500.34 518.07 554.38 542.11

of of of of of of of of of of of of of of of of

408

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 2501 to 4000mm longest side – cont'd Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm 4100mm 4200mm 4300mm 4400mm 4500mm

131.10 136.76 141.78 146.80 151.83 156.85 161.88 166.90 171.92 210.51 216.79 222.47 228.46 234.45 240.44 246.42

264.12 275.52 285.64 295.75 305.88 316.00 326.13 336.25 346.36 424.10 436.76 448.20 460.27 472.33 484.40 496.45

4.70 4.70 4.70 4.70 4.71 4.71 8.19 8.62 8.62 8.62 8.75 11.23 11.23 11.25 11.25 11.26

120.02 120.02 120.02 120.02 120.27 120.27 209.14 220.12 220.12 220.12 223.44 286.77 286.77 287.28 287.28 287.54

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

384.14 395.54 405.66 415.77 426.16 436.27 535.27 556.37 566.48 644.22 660.20 734.97 747.04 759.61 771.68 783.99

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm 4100mm 4200mm 4300mm 4400mm 4500mm

363.20 379.99 394.95 409.90 400.06 414.76 429.45 418.34 432.77 403.67 417.84 432.39 446.56 460.74 429.52 443.30

731.72 765.55 795.69 825.80 805.98 835.60 865.19 842.81 871.88 813.25 841.80 871.11 899.66 928.23 865.33 893.09

3.90 3.90 4.26 4.26 4.26 4.55 4.55 6.87 6.87 6.87 7.00 7.20 7.20 7.41 7.41 7.55

99.59 99.59 108.78 108.78 108.78 116.19 116.19 175.43 175.43 175.43 178.75 183.86 183.86 189.22 189.22 192.80

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

831.31 865.14 904.47 934.59 914.76 951.78 981.38 1018.24 1047.31 988.69 1020.55 1054.97 1083.52 1117.45 1054.55 1085.89

Material Costs/Prices for Measured Works – Mechanical Installations

409

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

Net Price £

two two two two two two two two two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm 4100mm 4200mm 4300mm 4400mm 4500mm

175.86 184.19 191.61 199.03 193.91 201.20 208.49 202.72 209.88 194.79 201.82 209.03 216.06 223.09 207.20 214.03

354.30 371.08 386.03 400.98 390.66 405.35 420.03 408.41 422.83 392.43 406.60 421.12 435.29 449.45 417.44 431.20

4.85 4.85 4.85 4.87 4.87 4.87 8.81 8.81 9.31 9.31 9.31 10.01 10.01 9.31 10.52 10.52

123.85 123.85 123.85 124.36 124.36 124.36 224.97 224.97 237.74 237.74 237.74 255.62 255.62 237.74 268.64 268.64

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

478.15 494.93 509.88 525.34 515.02 529.71 645.01 633.38 660.57 630.17 644.34 676.74 690.90 687.19 686.07 699.83

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm 4100mm 4200mm 4300mm 4400mm 4500mm

452.01 473.72 494.01 514.30 502.40 522.46 542.51 533.10 552.94 515.02 534.63 554.01 573.62 593.23 557.77 577.04

910.64 1345.71 1398.37 1451.05 1438.82 1491.04 1543.22 1536.17 1587.95 1523.86 1575.15 1626.16 1677.48 1728.77 1669.24 1719.85

4.85 4.85 4.87 4.87 4.87 8.81 8.81 14.81 14.81 14.81 15.20 16.30 16.50 17.01 17.01 17.01

123.85 123.85 124.36 124.36 124.36 224.97 224.97 378.19 378.19 378.19 388.15 416.24 421.34 434.37 434.37 434.37

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

1034.49 1469.56 1522.73 1575.41 1563.18 1716.01 1768.19 1914.36 1966.14 1902.05 1963.30 2042.40 2098.82 2163.14 2103.61 2154.21

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm 4100mm 4200mm 4300mm 4400mm 4500mm

187.74 194.24 200.09 205.95 211.78 217.64 223.49 229.40 235.26 241.37 247.22 253.16 259.02 264.87 270.78 276.63

378.23 391.33 403.11 414.92 426.66 438.47 450.25 462.16 473.97 486.28 498.06 510.03 521.83 533.62 545.53 557.31

2.88 2.88 2.88 2.88 2.88 3.94 3.94 3.94 4.83 4.83 4.83 5.44 5.44 5.85 5.85 5.85

73.54 73.54 73.54 73.54 73.54 100.61 100.61 100.61 123.34 123.34 123.34 138.92 138.92 149.39 149.39 149.39

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

451.77 464.87 476.66 488.46 500.21 539.08 550.87 562.77 597.31 609.62 621.40 648.94 660.75 683.01 694.91 706.70

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

410

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS B – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 2501 to 4000mm longest side – cont'd Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm 4100mm 4200mm 4300mm 4400mm 4500mm

194.47 201.40 207.72 214.02 220.33 226.64 232.95 239.26 245.58 251.89 258.19 264.50 270.81 277.13 283.44 289.75

391.79 405.75 418.48 431.18 443.89 456.60 469.31 482.03 494.76 507.47 520.16 532.87 545.59 558.32 571.03 583.74

2.88 2.88 2.88 2.88 3.94 3.94 3.94 4.12 4.12 4.12 5.00 5.00 5.00 5.23 5.23 5.39

73.54 73.54 73.54 73.54 100.61 100.61 100.61 105.21 105.21 105.21 127.68 127.68 127.68 133.55 133.55 137.64

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

465.33 479.29 492.03 504.72 544.50 557.21 569.92 587.23 599.97 612.68 647.84 660.55 673.27 691.87 704.59 721.38

13.44 14.79 15.20 17.10 19.50 19.50 21.50

27.08 29.80 30.62 34.45 39.29 39.29 43.31

1.25 1.25 1.25 1.25 1.35 1.50 1.50

31.92 31.92 31.92 31.92 34.51 38.34 38.34

nr nr nr nr nr nr nr

59.00 61.72 62.54 66.37 73.80 77.63 81.66

27.30 29.10 33.25 37.40

55.00 58.63 66.99 75.35

1.25 1.35 1.50 1.50

31.92 34.51 38.34 38.34

nr nr nr nr

86.92 93.14 105.33 113.69

Y30 – ANCILLARIES Access doors, hollow steel construction; 25mm mineral wool insulation; removeable or hinged; fixed with cams; including sub-frame and integral sealing gaskets Rectangular duct 150 x 150mm 200 x 200mm 300 x 150mm 300 x 300mm 400 x 400mm 450 x 300mm 450 x 450mm Access doors, hollow steel construction; 25mm mineral wool insulation; removeable or hinged; fixed with cams; including sub-frame and integral sealing gaskets Flat oval duct 235 x 90mm 235 x 140mm 335 x 235mm 535 x 235mm

Material Costs/Prices for Measured Works – Mechanical Installations

411

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C Y30 – AIR DUCTLINES Galvanised sheet metal DW144 class C rectangular section ductwork; including all necessary stiffeners, joints, couplers in the running length and duct supports Ductwork up Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

to 400mm longest side sides 200mm sides 300mm sides 400mm sides 500mm sides 600mm sides 700mm sides 800mm

10.94 11.72 10.19 11.02 11.75 12.48 13.25

22.04 23.61 20.53 22.20 23.67 25.14 26.69

1.19 1.16 1.17 1.17 1.19 1.19 1.19

30.39 29.62 29.88 29.88 30.39 30.39 30.39

m m m m m m m

52.43 53.23 50.41 52.08 54.06 55.53 57.08

Extra over fittings; Ductwork up to 400mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

7.23 8.06 8.88 9.71 10.53 11.36 12.18

14.57 16.24 17.89 19.56 21.21 22.89 24.54

0.38 0.38 0.38 0.38 0.38 0.38 0.38

9.70 9.70 9.70 9.70 9.70 9.70 9.70

nr nr nr nr nr nr nr

24.27 25.94 27.59 29.27 30.92 32.59 34.24

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

11.82 13.35 21.51 23.26 25.02 26.77 28.51

23.81 26.90 43.34 46.86 50.41 53.93 57.44

1.40 1.40 1.42 1.42 1.69 1.69 1.92

35.75 35.75 36.26 36.26 43.16 43.16 49.03

nr nr nr nr nr nr nr

59.56 62.65 79.60 83.12 93.56 97.09 106.47

Offset Sum Sum Sum Sum Sum Sum Sum

two two two two two two two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

17.45 19.73 28.85 31.35 33.41 35.67 37.67

35.16 39.75 58.12 63.16 67.31 71.86 75.89

1.63 1.63 1.65 1.65 1.92 1.92 1.92

41.62 41.62 42.13 42.13 49.03 49.03 49.03

nr nr nr nr nr nr nr

76.78 81.37 100.26 105.29 116.34 120.89 124.92

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

15.36 17.25 22.82 24.82 26.82 28.83 30.82

30.95 34.75 45.97 50.00 54.03 58.08 62.09

1.22 1.22 1.25 1.25 1.33 1.33 1.40

31.15 31.15 31.92 31.92 33.96 33.96 35.75

nr nr nr nr nr nr nr

62.10 65.91 77.89 81.92 88.00 92.05 97.84

of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

412

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd 90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

11.55 12.45 20.66 21.96 23.70 25.22 26.92

23.27 25.08 41.62 44.24 47.75 50.81 54.23

1.10 1.10 1.12 1.12 1.16 1.16 1.22

28.09 28.09 28.60 28.60 29.62 29.62 31.15

nr nr nr nr nr nr nr

51.36 53.17 70.22 72.84 77.37 80.43 85.39

45° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

12.47 13.69 21.64 23.17 24.93 26.57 28.30

25.12 27.58 43.60 46.68 50.23 53.53 57.01

1.29 1.29 1.29 1.29 1.39 1.39 1.46

32.94 32.94 32.94 32.94 35.49 35.49 37.28

nr nr nr nr nr nr nr

58.06 60.52 76.54 79.62 85.72 89.02 94.30

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

19.25 21.08 30.30 32.66 35.67 38.46 41.52

38.78 42.47 61.04 65.80 71.86 77.48 83.65

2.04 2.04 2.09 2.09 2.15 2.15 2.26

52.09 52.09 53.37 53.37 54.90 54.90 57.71

nr nr nr nr nr nr nr

90.88 94.56 114.41 119.17 126.77 132.39 141.36

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

19.12 21.24 26.43 28.76 31.05 33.33 35.61

38.52 42.79 53.25 57.94 62.55 67.15 71.74

0.92 0.92 0.95 0.95 1.03 1.03 1.03

23.49 23.49 24.26 24.26 26.30 26.30 26.30

nr nr nr nr nr nr nr

62.01 66.28 77.51 82.20 88.86 93.45 98.04

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm

21.91 24.51 27.12 29.72 32.33 34.94 37.54

44.14 49.38 54.64 59.88 65.13 70.39 75.63

1.10 1.10 1.16 1.16 1.18 1.18 1.18

28.09 28.09 29.62 29.62 30.13 30.13 30.13

nr nr nr nr nr nr nr

72.23 77.47 84.26 89.50 95.27 100.52 105.76

16.16 17.66 19.12 20.54 21.96 23.50 24.91

32.56 35.58 38.52 41.38 44.24 47.34 50.18

1.17 1.17 1.17 1.27 1.48 1.49 1.49

29.88 29.88 29.88 32.43 37.79 38.05 38.05

m m m m m m m

62.43 65.46 68.40 73.81 82.03 85.39 88.23

Ductwork 401 to 600mm longest side Sum of two sides 600mm Sum of two sides 700mm Sum of two sides 800mm Sum of two sides 900mm Sum of two sides 1000mm Sum of two sides 1100mm Sum of two sides 1200mm

Material Costs/Prices for Measured Works – Mechanical Installations

413

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over fittings: Ductwork 401 to 600mm longest side End Cap Sum of two sides 600mm Sum of two sides 700mm Sum of two sides 800mm Sum of two sides 900mm Sum of two sides 1000mm Sum of two sides 1100mm Sum of two sides 1200mm

10.53 11.36 12.18 13.01 13.83 14.65 15.48

21.21 22.89 24.54 26.21 27.86 29.51 31.19

0.38 0.38 0.38 0.38 0.38 0.38 0.38

9.70 9.70 9.70 9.70 9.70 9.70 9.70

nr nr nr nr nr nr nr

30.92 32.59 34.24 35.91 37.57 39.22 40.89

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

22.42 23.86 25.27 26.71 28.14 29.69 31.13

45.17 48.07 50.91 53.81 56.69 59.81 62.72

1.69 1.69 1.92 1.92 2.18 2.18 2.18

43.16 43.16 49.03 49.03 55.67 55.67 55.67

nr nr nr nr nr nr nr

88.32 91.23 99.94 102.84 112.36 115.48 118.38

Offset Sum Sum Sum Sum Sum Sum Sum

two two two two two two two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

31.79 33.93 35.13 36.25 37.75 38.74 39.52

64.05 68.36 70.77 73.03 76.05 78.05 79.62

1.92 1.92 1.92 1.92 2.18 2.18 2.18

49.03 49.03 49.03 49.03 55.67 55.67 55.67

nr nr nr nr nr nr nr

113.07 117.39 119.80 122.06 131.72 133.72 135.29

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

24.14 25.82 27.49 29.17 30.86 32.58 34.26

48.63 52.02 55.38 58.77 62.17 65.64 69.02

1.33 1.33 1.40 1.40 1.82 1.82 1.82

33.96 33.96 35.75 35.75 46.48 46.48 46.48

nr nr nr nr nr nr nr

82.60 85.98 91.13 94.52 108.65 112.11 115.50

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

21.07 21.57 22.97 24.41 25.28 26.78 28.20

42.45 43.46 46.28 49.18 50.93 53.95 56.81

1.16 1.16 1.22 1.22 1.40 1.40 1.40

29.62 29.62 31.15 31.15 35.75 35.75 35.75

nr nr nr nr nr nr nr

72.07 73.08 77.43 80.33 86.68 89.70 92.56

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

23.51 24.61 26.18 27.76 29.05 30.75 32.32

47.36 49.58 52.74 55.93 58.53 61.95 65.11

1.39 1.39 1.46 1.46 1.88 1.88 1.88

35.49 35.49 37.28 37.28 48.01 48.01 48.01

nr nr nr nr nr nr nr

82.86 85.08 90.03 93.21 106.53 109.96 113.12

of of of of of of of

two two two two two two two

sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

414

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd 90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

37.07 38.46 41.23 44.03 46.16 49.08 51.92

74.68 77.48 83.06 88.70 93.00 98.88 104.60

2.15 2.15 2.26 2.26 3.03 3.03 3.03

54.90 54.90 57.71 57.71 77.37 77.37 77.37

nr nr nr nr nr nr nr

129.59 132.39 140.78 146.42 170.37 176.25 181.97

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

31.26 33.56 35.87 38.17 40.47 42.86 45.16

62.98 67.61 72.27 76.90 81.53 86.35 90.98

1.03 1.03 1.03 1.03 1.29 1.29 1.29

26.30 26.30 26.30 26.30 32.94 32.94 32.94

nr nr nr nr nr nr nr

89.28 93.91 98.57 103.20 114.47 119.29 123.92

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides

600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

32.33 34.94 37.54 40.15 42.76 45.37 47.97

65.13 70.39 75.63 80.89 86.15 91.40 96.64

1.18 1.18 1.18 1.18 1.44 1.44 1.44

30.13 30.13 30.13 30.13 36.77 36.77 36.77

nr nr nr nr nr nr nr

95.27 100.52 105.76 111.02 122.92 128.18 133.41

22.53 23.95 25.37 26.31 28.32 29.74 31.16 32.58

45.39 48.25 51.11 53.01 57.05 59.92 62.78 65.64

1.27 1.48 1.49 1.49 1.51 1.55 1.61 1.62

32.43 37.79 38.05 38.05 38.56 39.58 41.11 41.37

m m m m m m m m

77.82 86.04 89.16 91.05 95.61 99.50 103.89 107.01

13.01 13.83 14.65 15.48 16.30 17.01 19.80 22.58

26.21 27.86 29.51 31.19 32.84 34.27 39.89 45.49

0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38

9.70 9.70 9.70 9.70 9.70 9.70 9.70 9.70

nr nr nr nr nr nr nr nr

35.91 37.57 39.22 40.89 42.54 43.97 49.59 55.19

Ductwork 601 to 800mm longest side Sum of two sides 900mm Sum of two sides 1000mm Sum of two sides 1100mm Sum of two sides 1200mm Sum of two sides 1300mm Sum of two sides 1400mm Sum of two sides 1500mm Sum of two sides 1600mm Extra over fittings; Ductwork 601 to 800mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

Material Costs/Prices for Measured Works – Mechanical Installations

415

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

26.99 28.42 29.86 31.41 32.84 34.04 39.40 44.76

54.38 57.26 60.16 63.28 66.16 68.58 79.38 90.18

1.92 2.18 2.18 2.18 2.30 2.30 2.47 2.47

49.03 55.67 55.67 55.67 58.73 58.73 63.07 63.07

nr nr nr nr nr nr nr nr

103.40 112.92 115.83 118.95 124.89 127.31 142.45 153.25

Offset Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

38.32 39.29 40.15 40.97 41.58 42.42 48.71 54.89

77.20 79.16 80.89 82.54 83.77 85.46 98.13 110.58

1.92 2.18 2.18 2.18 2.47 2.47 2.47 2.47

49.03 55.67 55.67 55.67 63.07 63.07 63.07 63.07

nr nr nr nr nr nr nr nr

126.23 134.82 136.56 138.21 146.84 148.54 161.21 173.66

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

28.91 30.60 32.29 34.00 35.68 37.07 43.66 50.26

58.24 61.65 65.05 68.50 71.88 74.68 87.96 101.26

1.40 1.82 1.82 1.82 2.32 2.32 2.56 2.58

35.75 46.48 46.48 46.48 59.24 59.24 65.37 65.88

nr nr nr nr nr nr nr nr

93.99 108.12 111.53 114.97 131.13 133.93 153.33 167.14

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

21.75 23.10 24.46 25.88 27.23 27.59 32.84 38.11

43.82 46.54 49.28 52.14 54.86 55.58 66.16 76.78

1.22 1.40 1.40 1.40 1.91 1.91 2.11 2.11

31.15 35.75 35.75 35.75 48.77 48.77 53.88 53.88

nr nr nr nr nr nr nr nr

74.97 82.29 85.03 87.89 103.63 104.36 120.04 130.66

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

26.85 28.39 29.94 31.59 33.13 34.05 39.51 44.97

54.09 57.20 60.32 63.64 66.75 68.60 79.60 90.60

1.46 1.88 1.88 1.88 2.26 2.44 2.44 2.68

37.28 48.01 48.01 48.01 57.71 62.31 62.31 68.44

nr nr nr nr nr nr nr nr

91.38 105.20 108.33 111.65 124.46 130.91 141.91 159.04

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

40.11 43.07 46.02 49.03 51.99 53.66 62.54 71.42

80.81 86.77 92.71 98.78 104.74 108.11 126.00 143.89

2.26 3.03 3.03 3.03 3.85 3.85 4.25 4.26

57.71 77.37 77.37 77.37 98.31 98.31 108.53 108.78

nr nr nr nr nr nr nr nr

138.52 164.15 170.09 176.15 203.06 206.42 234.52 252.67

of of of of of of of of

two two two two two two two two

Material Costs/Prices for Measured Works – Mechanical Installations

416

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

39.15 41.49 43.84 46.28 48.63 50.66 58.24 65.83

78.87 83.59 88.32 93.24 97.97 102.06 117.33 132.62

1.03 1.29 1.29 1.29 1.39 1.39 1.64 1.64

26.30 32.94 32.94 32.94 35.49 35.49 41.88 41.88

nr nr nr nr nr nr nr nr

105.18 116.53 121.26 126.18 133.47 137.56 159.21 174.50

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

40.15 42.76 45.37 47.97 50.58 52.82 61.32 69.82

80.89 86.15 91.40 96.64 101.90 106.41 123.54 140.66

1.18 1.44 1.44 1.44 1.69 1.69 1.79 1.79

30.13 36.77 36.77 36.77 43.16 43.16 45.71 45.71

nr nr nr nr nr nr nr nr

111.02 122.92 128.18 133.41 145.06 149.57 169.25 186.37

25.70 27.12 28.54 30.08 31.49 32.91 34.33 35.87 37.29 38.70

51.78 54.64 57.50 60.60 63.44 66.30 69.16 72.27 75.13 77.97

1.49 1.49 1.51 1.55 1.61 1.62 1.74 1.76 1.81 1.82

38.05 38.05 38.56 39.58 41.11 41.37 44.43 44.94 46.22 46.48

m m m m m m m m m m

89.83 92.69 96.06 100.18 104.55 107.67 113.60 117.21 121.35 124.44

14.65 15.48 16.30 17.01 19.80 22.58 25.37 28.16 30.95 33.74

29.51 31.19 32.84 34.27 39.89 45.49 51.11 56.73 62.35 67.97

0.38 0.38 0.38 0.38 0.38 0.38 0.58 0.58 0.58 0.58

9.70 9.70 9.70 9.70 9.70 9.70 14.81 14.81 14.81 14.81

nr nr nr nr nr nr nr nr nr nr

39.22 40.89 42.54 43.97 49.59 55.19 65.92 71.54 77.16 82.79

Ductwork 801 to 1000mm longest side Sum of two sides 1100mm Sum of two sides 1200mm Sum of two sides 1300mm Sum of two sides 1400mm Sum of two sides 1500mm Sum of two sides 1600mm Sum of two sides 1700mm Sum of two sides 1800mm Sum of two sides 1900mm Sum of two sides 2000mm Extra over fittings; Ductwork 801 to 1000mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

Material Costs/Prices for Measured Works – Mechanical Installations

417

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

27.63 28.95 30.27 31.45 36.70 41.95 47.20 52.55 57.80 63.05

55.66 58.32 60.98 63.36 73.94 84.51 95.09 105.87 116.45 127.02

2.18 2.18 2.30 2.30 2.47 2.47 2.59 2.59 2.71 2.71

55.67 55.67 58.73 58.73 63.07 63.07 66.14 66.14 69.20 69.20

nr nr nr nr nr nr nr nr nr nr

111.33 113.99 119.72 122.09 137.01 147.59 161.23 172.01 185.65 196.23

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

42.70 43.55 44.28 44.61 50.98 57.24 63.38 69.44 76.19 81.99

86.03 87.74 89.21 89.87 102.71 115.32 127.69 139.90 153.50 165.18

2.18 2.18 2.47 2.47 2.47 2.47 2.61 2.61 2.71 2.71

55.67 55.67 63.07 63.07 63.07 63.07 66.65 66.65 69.20 69.20

nr nr nr nr nr nr nr nr nr nr

141.69 143.41 152.28 152.95 165.78 178.39 194.34 206.55 222.70 234.38

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

29.96 31.54 33.11 34.40 40.87 47.36 53.84 60.33 66.81 73.30

60.36 63.54 66.71 69.30 82.34 95.41 108.47 121.54 134.60 147.67

1.82 1.82 2.32 2.32 2.56 2.58 2.84 2.84 3.13 3.13

46.48 46.48 59.24 59.24 65.37 65.88 72.52 72.52 79.93 79.93

nr nr nr nr nr nr nr nr nr nr

106.83 110.02 125.95 128.55 147.71 161.30 180.99 194.07 214.53 227.60

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

22.12 23.69 25.25 26.62 32.11 37.60 43.09 48.63 53.16 58.65

44.56 47.73 50.87 53.63 64.69 75.75 86.81 97.97 107.10 118.16

1.40 1.40 1.91 1.91 2.11 2.11 2.55 2.55 2.80 2.80

35.75 35.75 48.77 48.77 53.88 53.88 65.12 65.12 71.50 71.50

nr nr nr nr nr nr nr nr nr nr

80.31 83.48 99.64 102.40 118.57 129.63 151.93 163.09 178.60 189.66

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

28.84 30.51 32.17 33.70 39.29 44.88 50.47 56.17 61.26 66.85

58.10 61.47 64.81 67.89 79.16 90.42 101.68 113.16 123.42 134.68

1.88 1.88 2.26 2.44 2.68 2.69 2.96 2.96 3.26 3.26

48.01 48.01 57.71 62.31 68.44 68.69 75.59 75.59 83.25 83.25

nr nr nr nr nr nr nr nr nr nr

106.11 109.47 122.52 130.20 147.59 159.11 177.27 188.75 206.66 217.93

of of of of of of of of of of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

418

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd 90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

46.16 49.29 52.41 55.20 64.22 73.24 82.25 91.29 99.25 108.30

93.00 99.30 105.59 111.21 129.38 147.55 165.71 183.92 199.95 218.19

3.03 3.03 3.85 3.85 4.25 4.26 4.68 4.68 4.87 4.87

77.37 77.37 98.31 98.31 108.53 108.78 119.51 119.51 124.36 124.36

nr nr nr nr nr nr nr nr nr nr

170.37 176.68 203.90 209.52 237.91 256.34 285.21 303.43 324.31 342.55

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

43.93 46.28 48.63 50.74 58.33 65.91 73.49 81.17 88.75 96.34

88.50 93.24 97.97 102.22 117.51 132.79 148.06 163.53 178.80 194.09

1.29 1.29 1.39 1.39 1.64 1.64 1.69 1.69 1.85 1.85

32.94 32.94 35.49 35.49 41.88 41.88 43.16 43.16 47.24 47.24

nr nr nr nr nr nr nr nr nr nr

121.45 126.18 133.47 137.72 159.39 174.66 191.21 206.68 226.04 241.33

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

45.37 47.97 50.58 52.82 61.32 69.82 78.32 86.81 95.31 103.81

91.40 96.64 101.90 106.41 123.54 140.66 157.79 174.89 192.02 209.14

1.44 1.44 1.69 1.69 1.79 1.79 1.86 1.86 2.02 2.02

36.77 36.77 43.16 43.16 45.71 45.71 47.50 47.50 51.58 51.58

nr nr nr nr nr nr nr nr nr nr

128.18 133.41 145.06 149.57 169.25 186.37 205.28 222.39 243.60 260.72

43.84 45.84 47.72 49.72 51.60 53.48 55.35 57.36 59.24 68.12 70.26 72.13 74.14

88.32 92.35 96.14 100.17 103.96 107.74 111.51 115.56 119.35 137.24 141.55 145.32 149.37

1.51 1.55 1.61 1.62 1.74 1.76 1.81 1.82 2.53 2.55 2.56 2.76 2.77

38.56 39.58 41.11 41.37 44.43 44.94 46.22 46.48 64.61 65.12 65.37 70.48 70.73

m m m m m m m m m m m m m

126.88 131.93 137.25 141.54 148.39 152.69 157.73 162.04 183.95 202.35 206.92 215.80 220.10

Ductwork 1001 to 1250mm longest side Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

Material Costs/Prices for Measured Works – Mechanical Installations

419

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over fittings; Ductwork 1001 to 1250mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

16.54 17.26 20.07 22.88 25.68 28.49 31.30 34.10 36.91 39.72 42.53 45.33 48.14

33.32 34.77 40.43 46.10 51.74 57.40 63.06 68.70 74.36 80.02 85.68 91.32 96.99

0.38 0.38 0.38 0.38 0.58 0.58 0.58 0.58 0.87 0.87 0.87 0.87 0.87

9.70 9.70 9.70 9.70 14.81 14.81 14.81 14.81 22.22 22.22 22.22 22.22 22.22

nr nr nr nr nr nr nr nr nr nr nr nr nr

43.03 44.48 50.14 55.80 66.55 72.21 77.87 83.51 96.58 102.24 107.90 113.54 119.20

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

23.58 24.51 29.59 34.77 39.86 44.94 50.02 55.21 60.30 61.18 66.36 71.45 76.63

47.51 49.38 59.61 70.05 80.30 90.54 100.77 111.23 121.48 123.26 133.69 143.95 154.38

2.30 2.30 2.47 2.47 2.59 2.59 2.71 2.71 2.92 2.92 2.92 3.12 3.12

58.73 58.73 63.07 63.07 66.14 66.14 69.20 69.20 74.57 74.57 74.57 79.67 79.67

nr nr nr nr nr nr nr nr nr nr nr nr nr

106.24 108.11 122.69 133.12 146.44 156.68 169.98 180.43 196.05 197.82 208.26 223.62 234.05

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

56.73 58.42 65.05 71.60 77.90 84.03 90.01 95.86 101.51 100.16 108.66 117.15 125.65

114.29 117.70 131.05 144.25 156.94 169.29 181.34 193.12 204.51 201.79 218.91 236.02 253.14

2.47 2.47 2.47 2.47 2.61 2.61 2.71 2.71 2.92 3.26 3.26 3.47 3.48

63.07 63.07 63.07 63.07 66.65 66.65 69.20 69.20 74.57 83.25 83.25 88.61 88.87

nr nr nr nr nr nr nr nr nr nr nr nr nr

177.37 180.77 194.13 207.32 223.59 235.94 250.54 262.33 279.07 285.03 302.16 324.63 342.01

of of of of of of of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

420

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

26.15 27.26 33.58 39.91 46.22 52.54 65.58 65.19 71.50 73.62 79.95 86.27 92.59

52.68 54.92 67.65 80.40 93.12 105.85 132.12 131.34 144.05 148.32 161.07 173.80 186.54

2.32 2.32 2.56 2.58 2.84 2.84 3.13 3.13 4.26 4.27 4.30 4.77 4.79

59.24 59.24 65.37 65.88 72.52 72.52 79.93 79.93 108.78 109.04 109.80 121.81 122.32

nr nr nr nr nr nr nr nr nr nr nr nr nr

111.93 114.16 133.02 146.29 165.64 178.37 212.05 211.26 252.83 257.36 270.88 295.61 308.85

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

9.89 9.55 14.85 20.18 25.49 30.80 36.10 41.43 46.74 43.92 45.30 50.58 55.87

19.92 19.24 29.92 40.66 51.35 62.05 72.73 83.47 94.16 88.48 91.26 101.90 112.56

1.91 1.91 2.11 2.11 2.55 2.55 2.80 2.80 2.80 2.80 4.35 4.35 4.35

48.77 48.77 53.88 53.88 65.12 65.12 71.50 71.50 71.50 71.50 111.08 111.08 111.08

nr nr nr nr nr nr nr nr nr nr nr nr nr

68.70 68.01 83.80 94.54 116.47 127.17 144.23 154.97 165.67 159.98 202.35 212.98 223.64

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

24.13 24.69 30.19 35.77 41.27 46.77 52.26 57.85 63.34 64.42 67.99 73.47 79.04

48.61 49.74 60.82 72.06 83.14 94.23 105.29 116.55 127.61 129.78 136.98 148.02 159.24

2.26 2.44 2.68 2.69 2.96 2.96 3.26 3.26 7.50 7.50 7.55 8.13 8.30

57.71 62.31 68.44 68.69 75.59 75.59 83.25 83.25 191.52 191.52 192.80 207.61 211.95

nr nr nr nr nr nr nr nr nr nr nr nr nr

106.32 112.05 129.26 140.76 158.73 169.81 188.53 199.79 319.13 321.30 329.77 355.62 371.19

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

421

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

55.77 57.97 68.49 79.02 96.68 107.12 117.58 121.11 131.64 132.71 138.55 149.11 159.68

112.36 116.79 137.98 159.20 194.78 215.81 236.88 243.99 265.21 267.36 279.13 300.40 321.70

3.85 3.85 4.25 4.26 4.68 4.68 4.87 4.87 7.50 7.50 7.55 8.13 8.30

98.31 98.31 108.53 108.78 119.51 119.51 124.36 124.36 191.52 191.52 192.80 207.61 211.95

nr nr nr nr nr nr nr nr nr nr nr nr nr

210.67 215.10 246.51 267.98 314.28 335.32 361.24 368.35 456.73 458.88 471.93 508.01 533.65

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

49.63 51.71 59.35 67.08 74.72 82.36 89.99 97.72 105.36 113.00 120.73 128.37 136.10

99.99 104.18 119.57 135.14 150.53 165.93 181.30 196.87 212.26 227.66 243.23 258.62 274.19

1.39 1.39 1.64 1.64 1.69 1.69 1.85 1.85 2.61 2.61 2.61 2.88 2.88

35.49 35.49 41.88 41.88 43.16 43.16 47.24 47.24 66.65 66.65 66.65 73.54 73.54

nr nr nr nr nr nr nr nr nr nr nr nr nr

135.48 139.67 161.45 177.02 193.69 209.08 228.54 244.11 278.91 294.30 309.88 332.16 347.74

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

51.78 54.12 62.71 71.30 79.89 88.48 97.08 105.66 114.26 122.84 131.44 140.02 148.62

104.32 109.03 126.34 143.64 160.95 178.26 195.58 212.87 230.19 247.48 264.81 282.09 299.42

1.69 1.69 1.79 1.79 1.86 1.86 2.02 2.02 2.61 2.80 2.80 3.06 3.06

43.16 43.16 45.71 45.71 47.50 47.50 51.58 51.58 66.65 71.50 71.50 78.14 78.14

nr nr nr nr nr nr nr nr nr nr nr nr nr

147.47 152.19 172.05 189.35 208.45 225.75 247.16 264.45 296.84 318.98 336.31 360.23 377.56

Material Costs/Prices for Measured Works – Mechanical Installations

422

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd Ductwork 1251 to 1600mm longest side Sum of two sides 1700mm Sum of two sides 1800mm Sum of two sides 1900mm Sum of two sides 2000mm Sum of two sides 2100mm Sum of two sides 2200mm Sum of two sides 2300mm Sum of two sides 2400mm Sum of two sides 2500mm Sum of two sides 2600mm Sum of two sides 2700mm Sum of two sides 2800mm Sum of two sides 2900mm Sum of two sides 3000mm Sum of two sides 3100mm Sum of two sides 3200mm

55.28 57.35 59.45 61.42 63.39 65.36 67.46 69.53 71.50 80.59 82.57 84.67 86.77 88.74 90.81 92.78

111.37 115.54 119.77 123.74 127.71 131.68 135.91 140.08 144.05 162.36 166.35 170.58 174.81 178.78 182.95 186.92

1.74 1.76 1.81 1.82 2.53 2.55 2.56 2.76 2.77 2.97 2.99 3.30 3.31 3.53 3.55 3.56

44.43 44.94 46.22 46.48 64.61 65.12 65.37 70.48 70.73 75.84 76.35 84.27 84.52 90.14 90.65 90.91

m m m m m m m m m m m m m m m m

155.80 160.48 165.99 170.22 192.31 196.79 201.28 210.56 214.78 238.20 242.70 254.85 259.34 268.92 273.60 277.83

Extra over fittings; Ductwork 1251 to 1600mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

25.68 28.49 31.30 34.10 36.91 39.72 42.53 45.33 48.14 50.95 53.76 56.56 59.37 77.76 64.40 66.41

51.74 57.40 63.06 68.70 74.36 80.02 85.68 91.32 96.99 102.65 108.31 113.95 119.61 156.66 129.74 133.79

0.58 0.58 0.58 0.58 0.87 0.87 0.87 0.87 0.87 0.87 0.87 1.16 1.16 1.73 1.73 1.73

14.81 14.81 14.81 14.81 22.22 22.22 22.22 22.22 22.22 22.22 22.22 29.62 29.62 44.18 44.18 44.18

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

66.55 72.21 77.87 83.51 96.58 102.24 107.90 113.54 119.20 124.86 130.52 143.57 149.23 200.84 173.92 177.97

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm

35.06 39.89 44.79 34.10 54.45 59.28 64.18 69.01 73.84 72.98 77.80 82.61 92.52 97.34

70.63 80.36 90.24 137.40 109.70 119.43 129.30 139.03 148.76 147.03 156.74 166.43 186.40 352.77

2.59 2.59 2.71 2.71 2.92 2.92 2.92 3.12 3.12 3.16 3.16 4.00 4.01 4.56

66.14 66.14 69.20 69.20 74.57 74.57 74.57 79.67 79.67 80.69 80.69 102.14 102.40 116.44

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

136.77 146.50 159.44 206.60 184.26 193.99 203.87 218.70 228.43 227.72 237.43 268.57 288.79 469.21

Material Costs/Prices for Measured Works – Mechanical Installations

423

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Sum of two sides 3100mm Sum of two sides 3200mm Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of of of of of

two two two two two two two two two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

100.92 104.16

203.32 209.85

4.56 4.56

116.44 116.44

nr nr

319.76 326.29

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

86.26 95.31 101.37 107.15 112.77 118.21 123.50 132.13 137.12 137.16 145.68 154.19 167.75 176.27 182.92 189.07

173.78 192.02 204.23 215.87 227.19 238.15 248.81 266.20 276.25 276.33 293.49 310.64 337.96 355.12 368.52 380.91

2.61 2.61 2.71 2.71 2.92 3.26 3.26 3.47 3.48 3.49 3.50 4.33 4.74 5.31 5.34 5.35

66.65 66.65 69.20 69.20 74.57 83.25 83.25 88.61 88.87 89.12 89.38 110.57 121.04 135.60 136.36 136.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

240.43 258.67 273.43 285.07 301.76 321.40 332.06 354.81 365.11 365.45 382.87 421.21 459.00 490.72 504.88 517.53

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

39.06 45.13 51.16 57.21 63.26 69.31 75.35 81.41 87.46 87.81 93.86 99.89 108.44 114.48 118.98 123.05

78.69 90.92 103.07 115.26 127.45 139.64 151.80 164.01 176.20 176.91 189.09 201.24 218.47 230.64 239.70 247.90

2.84 2.84 3.13 3.13 4.26 4.27 4.30 4.77 4.79 4.95 4.95 8.49 8.88 9.02 9.02 9.09

72.52 72.52 79.93 79.93 108.78 109.04 109.80 121.81 122.32 126.40 126.40 216.80 226.76 230.33 230.33 232.12

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

151.21 163.44 183.00 195.19 236.23 248.67 261.61 285.82 298.52 303.31 315.50 418.04 445.23 460.97 470.04 480.02

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

85.50 92.72 103.75 114.60 125.46 136.30 147.33 154.18 164.99 165.58 176.39 182.34 203.29 214.07 222.34 229.94

172.25 186.80 209.02 230.88 252.76 274.60 296.82 310.62 332.40 333.59 355.36 367.35 409.56 431.28 447.94 463.25

2.55 2.55 2.80 2.80 2.61 2.62 2.63 4.34 4.35 4.53 4.53 7.13 7.17 7.26 7.26 7.31

65.12 65.12 71.50 71.50 66.65 66.90 67.16 110.83 111.08 115.68 115.68 182.07 183.09 185.39 185.39 186.67

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

237.37 251.92 280.52 302.38 319.41 341.50 363.98 421.44 443.48 449.26 471.04 549.42 592.65 616.67 633.33 649.92

Material Costs/Prices for Measured Works – Mechanical Installations

424

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd 45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

41.07 44.63 50.13 55.53 60.94 66.36 71.85 75.22 80.61 80.54 85.93 88.85 99.31 104.68 108.80 112.59

82.74 89.91 100.99 111.87 122.77 133.69 144.75 151.54 162.40 162.26 173.12 179.00 200.07 210.89 219.19 226.83

2.96 2.96 3.26 3.26 7.50 7.50 7.55 8.13 8.30 8.56 8.62 9.09 9.09 9.62 9.62 9.62

75.59 75.59 83.25 83.25 191.52 191.52 192.80 207.61 211.95 218.59 220.12 232.12 232.12 245.66 245.66 245.66

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

158.33 165.50 184.24 195.12 314.29 325.21 337.55 359.15 374.35 380.85 393.24 411.12 432.20 456.55 464.85 472.49

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

90.25 95.93 106.62 117.33 128.04 138.76 149.45 155.07 165.82 164.46 175.22 179.96 198.75 209.53 218.37 226.78

181.82 193.27 214.80 236.38 257.96 279.55 301.09 312.41 334.07 331.33 353.01 362.56 400.41 422.13 439.94 456.88

4.68 4.68 4.87 4.87 7.50 7.50 7.55 8.13 8.30 8.56 8.62 15.20 15.20 15.60 16.04 16.04

119.51 119.51 124.36 124.36 191.52 191.52 192.80 207.61 211.95 218.59 220.12 388.15 388.15 398.36 409.60 409.60

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

301.33 312.77 339.16 360.74 449.48 471.07 493.89 520.02 546.02 549.92 573.13 750.70 788.56 820.49 849.54 866.48

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

77.08 84.72 92.46 100.11 107.76 115.41 123.15 130.79 138.45 146.10 153.75 161.38 171.63 179.28 185.37 190.91

155.29 170.68 186.27 201.69 217.10 232.51 248.10 263.50 278.93 294.34 309.75 325.12 345.77 361.19 373.46 384.62

1.69 1.69 1.85 1.85 2.61 2.61 2.61 2.88 2.88 2.88 2.88 3.94 3.94 4.83 4.83 4.83

43.16 43.16 47.24 47.24 66.65 66.65 66.65 73.54 73.54 73.54 73.54 100.61 100.61 123.34 123.34 123.34

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

198.44 213.84 233.52 248.93 283.75 299.16 314.75 337.04 352.47 367.88 383.30 425.74 446.39 484.53 496.79 507.96

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

425

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

Material £

Labour hours

Labour £

Unit

Total rate £

79.89 88.48 97.08 105.66 114.26 122.84 131.44 140.02 148.62 157.21 165.80 174.39 182.98 191.57 198.40 204.62

160.95 178.26 195.58 212.87 230.19 247.48 264.81 282.09 299.42 316.72 334.03 351.33 368.64 385.95 399.71 412.24

1.86 1.86 2.02 2.02 2.80 2.80 2.80 3.06 3.06 3.08 3.08 4.13 4.13 5.02 5.02 5.02

47.50 47.50 51.58 51.58 71.50 71.50 71.50 78.14 78.14 78.65 78.65 105.46 105.46 128.19 128.19 128.19

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

208.45 225.75 247.16 264.45 301.69 318.98 336.31 360.23 377.56 395.37 412.68 456.80 474.10 514.14 527.90 540.43

73.64 75.93 78.23 80.49 82.80 84.97 97.15 89.33 91.63 93.81 108.75 110.93 113.23 115.41 117.59 119.76 122.07 124.25 126.43 128.60

148.36 152.97 157.61 162.16 166.81 171.18 195.72 179.97 184.60 188.99 219.09 223.49 228.12 232.51 236.90 241.27 245.93 250.32 254.71 259.08

2.53 2.55 2.55 2.56 2.76 2.77 2.97 2.99 3.30 3.31 3.53 3.53 3.53 3.55 3.55 3.55 3.56 3.56 3.56 3.56

64.61 65.12 65.12 65.37 70.48 70.73 75.84 76.35 84.27 84.52 90.14 90.14 90.14 90.65 90.65 90.65 90.91 90.91 90.91 90.91

m m m m m m m m m m m m m m m m m m m m

212.96 218.09 222.72 227.53 237.29 241.92 271.57 256.32 268.87 273.52 309.24 313.63 318.26 323.16 327.56 331.93 336.84 341.23 345.62 349.99

Ductwork 1601 to 2000mm longest side Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of of of of of of of of of

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

Material Costs/Prices for Measured Works – Mechanical Installations

426

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd Extra over fittings; Ductwork 1601 to 2000mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

37.32 40.15 42.97 45.80 48.62 51.45 54.28 57.11 59.93 62.76 65.00 67.03 69.06 71.09 73.13 75.16 77.20 79.23 81.27 83.30

75.19 80.89 86.57 92.27 97.95 103.65 109.36 115.06 120.74 126.44 130.95 135.04 139.13 143.22 147.33 151.42 155.53 159.62 163.73 167.82

0.87 0.87 0.87 0.87 0.87 0.87 0.87 1.16 1.16 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73

22.22 22.22 22.22 22.22 22.22 22.22 22.22 29.62 29.62 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

97.40 103.10 108.79 114.49 120.17 125.87 131.57 144.68 150.36 170.62 175.13 179.22 183.31 187.40 191.51 195.60 199.71 203.80 207.91 212.00

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

50.84 55.66 60.55 65.30 70.20 75.01 79.83 84.65 89.54 94.36 87.80 91.03 99.44 102.67 105.90 109.13 112.44 115.67 118.90 122.14

102.42 112.14 121.99 131.56 141.43 151.12 160.83 170.54 180.39 190.10 176.89 183.39 200.34 206.84 213.35 219.86 226.53 233.03 239.54 246.07

2.92 2.92 2.92 3.12 3.12 3.16 3.16 4.00 4.01 4.01 4.01 4.56 4.56 4.56 4.56 4.56 4.56 4.56 4.56 4.56

74.57 74.57 74.57 79.67 79.67 80.69 80.69 102.14 102.40 102.40 102.40 116.44 116.44 116.44 116.44 116.44 116.44 116.44 116.44 116.44

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

176.99 186.70 196.55 211.23 221.10 231.81 241.52 272.68 282.79 292.50 279.29 299.84 316.78 323.29 329.80 336.30 342.97 349.48 355.99 362.51

Material Costs/Prices for Measured Works – Mechanical Installations

427

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

Net Price £

of of of of of of of of of of of of of of of of of of of of

two two two two two two two two two two two two two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

119.41 128.45 133.68 146.54 151.60 156.39 160.99 165.43 169.72 173.79 165.32 171.45 182.71 188.84 194.98 201.11 207.27 213.40 219.53 225.67

240.57 258.78 269.32 295.23 305.42 315.07 324.34 333.28 341.93 350.13 333.06 345.41 368.10 380.45 392.82 405.17 417.58 429.93 442.28 454.65

2.92 3.26 3.26 3.47 3.48 3.49 3.50 4.33 4.74 5.31 5.34 5.35 5.35 5.35 5.35 5.35 5.35 5.35 5.35 5.35

74.57 83.25 83.25 88.61 88.87 89.12 89.38 110.57 121.04 135.60 136.36 136.62 136.62 136.62 136.62 136.62 136.62 136.62 136.62 136.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

315.13 342.03 352.57 383.84 394.29 404.19 413.71 443.85 462.97 485.72 469.42 482.03 504.71 517.06 529.43 541.78 554.19 566.54 578.89 591.26

Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

76.70 84.11 91.50 156.33 106.32 113.72 121.12 128.52 135.91 143.31 138.74 143.76 151.32 156.33 161.36 166.38 171.39 176.41 181.43 186.46

154.52 169.45 184.34 314.95 214.20 229.11 244.01 258.92 273.81 288.72 279.51 289.63 304.86 314.95 325.08 335.20 345.29 355.40 365.52 375.65

4.26 4.27 4.30 4.77 4.79 4.95 4.95 8.49 8.88 9.02 9.02 9.09 9.09 9.09 9.09 9.09 9.09 9.09 9.09 9.09

108.78 109.04 109.80 121.81 122.32 126.40 126.40 216.80 226.76 230.33 230.33 232.12 232.12 232.12 232.12 232.12 232.12 232.12 232.12 232.12

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

263.31 278.49 294.15 436.76 336.51 355.51 370.42 475.72 500.57 519.05 509.85 521.75 536.98 547.07 557.21 567.32 577.41 587.53 597.64 607.77

Material Costs/Prices for Measured Works – Mechanical Installations

428

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd 90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

109.00 209.58 226.99 232.78 250.15 267.23 284.30 301.38 318.75 335.83 326.06 338.38 366.30 378.62 390.94 403.27 415.88 428.20 440.52 452.84

219.60 422.23 457.31 468.97 503.96 538.37 572.76 607.18 642.17 676.58 656.90 681.72 737.97 762.79 787.61 812.45 837.85 862.67 887.49 912.31

2.61 2.62 2.63 4.34 4.35 4.53 4.53 7.13 7.17 7.26 7.26 7.31 7.31 7.31 7.31 7.31 7.31 7.31 7.31 7.31

66.65 66.90 67.16 110.83 111.08 115.68 115.68 182.07 183.09 185.39 185.39 186.67 186.67 186.67 186.67 186.67 186.67 186.67 186.67 186.67

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

286.25 489.13 524.47 579.80 615.05 654.05 688.44 789.25 825.26 861.97 842.29 868.39 924.63 949.45 974.28 999.12 1024.52 1049.34 1074.16 1098.98

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

52.45 149.89 161.56 167.08 178.73 190.15 201.57 212.99 224.65 236.07 232.84 241.10 259.78 268.03 276.28 284.54 293.02 301.27 309.52 317.77

105.67 301.98 325.49 336.61 360.08 383.09 406.09 429.10 452.59 475.60 469.09 485.73 523.37 539.99 556.61 573.25 590.33 606.95 623.57 640.20

7.50 7.50 7.55 8.13 8.30 8.56 8.62 9.09 9.09 9.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62

191.52 191.52 192.80 207.61 211.95 218.59 220.12 232.12 232.12 245.66 245.66 245.66 245.66 245.66 245.66 245.66 245.66 245.66 245.66 245.66

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

297.19 493.50 518.28 544.22 572.03 601.67 626.21 661.22 684.71 721.25 714.75 731.39 769.02 785.64 802.26 818.90 835.99 852.61 869.23 885.85

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

429

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

244.26 258.18 278.68 285.33 305.87 326.52 347.17 367.82 388.37 409.01 398.07 413.97 438.67 454.56 470.46 486.35 502.15 518.04 533.93 549.83

492.10 520.14 561.44 574.84 616.22 657.82 699.43 741.03 782.43 824.01 801.97 834.00 883.77 915.78 947.81 979.83 1011.66 1043.67 1075.68 1107.71

7.50 7.50 7.55 8.13 8.30 8.56 8.62 15.20 15.20 15.60 16.04 16.04 16.04 16.04 16.04 16.04 16.04 16.04 16.04 16.04

191.52 191.52 192.80 207.61 211.95 218.59 220.12 388.15 388.15 398.36 409.60 409.60 409.60 409.60 409.60 409.60 409.60 409.60 409.60 409.60

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

683.62 711.66 754.24 782.45 828.17 876.41 919.55 1129.18 1170.58 1222.37 1211.57 1243.60 1293.36 1325.38 1357.41 1389.42 1421.25 1453.27 1485.28 1517.31

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

109.49 117.19 124.99 132.58 140.38 148.09 155.80 163.51 171.31 179.02 185.16 190.76 198.99 204.60 210.19 215.79 221.47 227.07 232.67 238.27

220.58 236.10 251.81 267.10 282.82 298.35 313.88 329.42 345.13 360.66 373.03 384.31 400.90 412.20 423.46 434.74 446.18 457.47 468.75 480.03

2.61 2.61 2.61 2.88 2.88 2.88 2.88 3.94 3.94 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83

66.65 66.65 66.65 73.54 73.54 73.54 73.54 100.61 100.61 123.34 123.34 123.34 123.34 123.34 123.34 123.34 123.34 123.34 123.34 123.34

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

287.23 302.75 318.46 340.65 356.36 371.89 387.43 430.03 445.74 484.00 496.37 507.65 524.23 535.54 546.80 558.08 569.52 580.81 592.09 603.37

two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

430

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

116.29 124.98 133.66 142.35 151.03 159.72 155.80 163.51 171.31 194.47 201.40 207.72 214.02 220.33 226.64 232.95 239.26 245.58 251.89 258.19

234.28 251.79 269.28 286.79 304.27 321.78 313.88 329.42 345.13 391.79 405.75 418.48 431.18 443.89 456.60 469.31 482.03 494.76 507.47 520.16

2.80 2.80 2.80 3.06 3.06 3.08 3.08 4.13 4.13 5.02 5.02 5.02 5.02 5.02 5.02 5.02 5.02 5.02 5.02 5.02

71.50 71.50 71.50 78.14 78.14 78.65 78.65 105.46 105.46 128.19 128.19 128.19 128.19 128.19 128.19 128.19 128.19 128.19 128.19 128.19

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

305.78 323.29 340.78 364.93 382.41 400.43 392.53 434.88 450.59 519.98 533.94 546.67 559.37 572.08 584.79 597.50 610.22 622.95 635.66 648.35

146.84 151.13 154.95 159.47 163.29 167.00 170.80 174.51 178.33 182.03 199.79 203.49 207.31 211.01 214.72 219.15

295.83 304.47 312.17 321.28 328.97 336.45 344.10 351.58 359.27 366.73 402.51 409.96 417.66 425.11 432.59 441.51

2.77 2.97 2.99 3.30 3.31 3.53 3.55 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56

70.73 75.84 76.35 84.27 84.52 90.14 90.65 90.91 90.91 90.91 90.91 90.91 90.91 90.91 90.91 90.91

m m m m m m m m m m m m m m m m

366.57 380.32 388.52 405.55 413.50 426.59 434.75 442.48 450.18 457.63 493.42 500.87 508.57 516.02 523.49 532.42

Ductwork 2001 to 2500mm longest side Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of of of of of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

Material Costs/Prices for Measured Works – Mechanical Installations

431

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over fittings; Ductwork 2001 to 2500mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

48.62 51.45 54.28 57.11 59.93 62.76 65.00 67.03 69.06 71.09 73.13 75.16 77.20 79.23 81.27 83.30

97.95 103.65 109.36 115.06 120.74 126.44 130.95 135.04 139.13 143.22 147.33 151.42 155.53 159.62 163.73 167.82

0.87 0.87 0.87 1.16 1.16 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73

22.22 22.22 22.22 29.62 29.62 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18 44.18

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

120.17 125.87 131.57 144.68 150.36 170.62 175.13 179.22 183.31 187.40 191.51 195.60 199.71 203.80 207.91 212.00

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

40.49 44.60 48.79 52.80 56.99 61.11 63.96 66.49 69.10 71.63 63.46 65.99 73.80 76.32 78.85 81.45

81.57 89.85 98.29 106.37 114.81 123.12 128.86 133.95 139.21 144.31 127.85 132.95 148.68 153.76 158.86 164.09

3.12 3.16 3.16 4.00 4.01 4.56 4.56 4.56 4.56 4.56 4.56 4.56 4.56 4.56 4.56 4.56

79.67 80.69 80.69 102.14 102.40 116.44 116.44 116.44 116.44 116.44 116.44 116.44 116.44 116.44 116.44 116.44

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

161.25 170.55 178.99 208.52 217.21 239.56 245.30 250.40 255.66 260.75 244.29 249.39 265.13 270.20 275.30 280.54

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

134.78 143.41 143.24 160.65 160.07 158.99 155.62 151.31 146.63 141.48 130.27 135.28 145.52 150.52 155.53 160.55

271.53 288.92 288.58 323.65 322.49 320.31 313.52 304.84 295.41 285.03 262.45 272.54 293.17 303.25 313.34 323.45

3.48 3.49 3.50 4.33 4.74 5.31 5.34 5.35 5.35 5.35 5.35 5.35 5.35 5.35 5.35 5.35

88.87 89.12 89.38 110.57 121.04 135.60 136.36 136.62 136.62 136.62 136.62 136.62 136.62 136.62 136.62 136.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

360.40 378.04 377.95 434.22 443.53 455.91 449.88 441.45 432.03 421.65 399.07 409.16 429.79 439.86 449.96 460.07

of of of of of of of of of of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

432

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: RECTANGULAR – CLASS C – cont'd AIR DUCTLINES – cont'd Square to round Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

69.13 75.56 81.99 88.43 94.87 101.30 105.90 109.95 114.00 118.07 111.16 115.22 121.87 125.92 129.99 134.03

139.27 152.23 165.18 178.16 191.13 204.08 213.35 221.51 229.67 237.87 223.95 232.13 245.53 253.68 261.88 270.02

4.79 4.95 4.95 8.49 8.88 9.02 9.02 9.09 9.09 9.09 9.09 9.09 9.09 9.09 9.09 9.09

122.32 126.40 126.40 216.80 226.76 230.33 230.33 232.12 232.12 232.12 232.12 232.12 232.12 232.12 232.12 232.12

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

261.59 278.63 291.58 394.96 417.89 434.42 443.69 453.63 461.79 469.99 456.07 464.25 477.65 485.81 494.01 502.15

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

182.87 188.12 203.99 197.38 212.97 228.28 239.86 250.41 261.25 271.81 253.90 264.46 290.88 301.44 312.00 308.94

368.42 379.00 410.97 397.65 429.06 459.90 483.23 504.49 526.33 547.60 511.52 532.79 586.02 607.30 628.57 622.41

4.35 4.53 4.53 7.13 7.17 7.26 7.26 7.31 7.31 7.31 7.31 7.31 7.31 7.31 7.31 7.31

111.08 115.68 115.68 182.07 183.09 185.39 185.39 186.67 186.67 186.67 186.67 186.67 186.67 186.67 186.67 186.67

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

479.50 494.67 526.65 579.72 612.15 645.30 668.63 691.16 713.00 734.27 698.19 719.46 772.69 793.96 815.24 809.07

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

149.72 155.32 166.40 165.90 176.84 187.56 195.82 203.37 211.15 218.70 211.59 219.14 237.31 244.86 252.41 253.15

301.63 312.92 335.24 334.23 356.27 377.87 394.51 409.72 425.39 440.60 426.28 441.49 478.10 493.31 508.52 510.01

8.30 8.56 8.62 9.09 9.09 9.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62 9.62

211.95 218.59 220.12 232.12 232.12 245.66 245.66 245.66 245.66 245.66 245.66 245.66 245.66 245.66 245.66 245.66

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

513.58 531.50 555.36 566.35 588.39 623.52 640.17 655.38 671.05 686.26 671.94 687.15 723.75 738.96 754.17 755.66

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

433

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

195.70 205.09 223.02 212.84 230.51 248.30 262.31 275.35 288.26 301.30 278.36 291.40 314.08 327.12 340.16 335.73

394.27 413.18 449.31 428.80 464.40 500.24 528.46 554.73 580.74 607.01 560.80 587.07 632.76 659.03 685.30 676.38

8.30 8.56 8.62 15.20 15.20 15.20 16.04 16.04 16.04 16.04 16.04 16.04 16.04 16.04 16.04 16.04

211.95 218.59 220.12 388.15 388.15 388.15 409.60 409.60 409.60 409.60 409.60 409.60 409.60 409.60 409.60 409.60

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

606.22 631.77 669.43 816.95 852.54 888.38 938.06 964.33 990.34 1016.61 970.40 996.67 1042.36 1068.63 1094.90 1085.98

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

147.88 155.83 163.89 171.75 179.80 187.77 194.17 200.03 205.97 211.83 217.95 223.81 232.35 238.20 244.06 250.00

297.93 313.94 330.18 346.02 362.23 378.29 391.18 402.99 414.96 426.76 439.09 450.90 468.10 479.89 491.70 503.66

2.88 2.88 2.88 3.94 3.94 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83

73.54 73.54 73.54 100.61 100.61 123.34 123.34 123.34 123.34 123.34 123.34 123.34 123.34 123.34 123.34 123.34

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

371.47 387.49 403.72 446.63 462.85 501.63 514.52 526.33 538.30 550.10 562.43 574.24 591.44 603.23 615.03 627.00

Grille neck Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

151.03 159.72 168.41 177.10 185.79 194.47 201.40 207.72 214.02 220.33 226.64 232.95 239.26 245.58 251.89 258.19

304.27 321.78 339.29 356.79 374.30 391.79 405.75 418.48 431.18 443.89 456.60 469.31 482.03 494.76 507.47 520.16

3.06 3.08 3.08 4.13 4.13 5.02 5.02 5.02 5.02 5.02 5.02 5.02 5.02 5.02 5.02 5.02

78.14 78.65 78.65 105.46 105.46 128.19 128.19 128.19 128.19 128.19 128.19 128.19 128.19 128.19 128.19 128.19

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

382.41 400.43 417.94 462.26 479.77 519.98 533.94 546.67 559.37 572.08 584.79 597.50 610.22 622.95 635.66 648.35

Material Costs/Prices for Measured Works – Mechanical Installations

434

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Y30 – DUCTWORK ANCILLARIES: ACCESS DOORS Refer to ancillaries in U10: DUCTWORK: RECTANGULAR: CLASS B for details of access doors U10: DUCTWORK: VOLUME/FIRE DAMPERS Y30 – DUCTWORK ANCILLARIES: VOLUME CONTROL AND FIRE DAMPERS Volume control damper; opposed blade; galvanised steel casing; aluminium aerofoil blades; manually operated Rectangular Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

Circular 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 350mm dia. 400mm dia. 450mm dia. 500mm dia. 650mm dia. 700mm dia. 800mm dia. 900mm dia. 1000mm dia.

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

21.28 22.76 24.89 27.24 30.11 33.09 36.17 39.68 43.09 46.93 53.08 57.24 61.71 66.81 71.81 76.60 82.34 87.66 94.04

26.51 28.35 31.00 33.93 37.51 41.22 45.06 49.43 53.68 58.46 66.12 71.30 76.87 83.22 89.45 95.42 102.57 109.19 117.14

1.60 1.60 1.60 1.60 1.70 2.10 2.15 2.30 2.40 2.60 2.80 3.10 3.25 3.40 3.45 3.60 3.90 4.20 4.33

40.86 40.86 40.86 40.86 43.43 53.65 54.90 58.73 61.29 66.39 71.50 79.16 82.99 86.82 88.10 91.93 99.59 107.29 110.57

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

67.37 69.21 71.86 74.79 80.94 94.86 99.96 108.16 114.96 124.85 137.62 150.46 159.86 170.04 177.55 187.35 202.16 216.49 227.71

28.41 33.83 36.70 40.85 47.23 49.68 54.25 58.62 63.84 80.64 87.13 101.18 116.39 132.46

35.39 42.14 45.72 50.89 58.83 61.88 67.58 73.02 79.52 100.45 108.53 126.04 144.98 165.00

0.80 0.90 1.05 1.20 1.35 1.65 1.90 2.10 2.95 4.55 5.20 5.80 6.40 7.00

20.43 22.98 26.82 30.66 34.51 42.14 48.55 53.65 75.33 116.19 132.79 148.11 163.43 178.75

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

55.82 65.12 72.54 81.54 93.34 104.02 116.12 126.67 154.85 216.64 241.32 274.14 308.41 343.75

Material Costs/Prices for Measured Works – Mechanical Installations

435

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Flat oval 345 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 823 x 254mm 632 x 305mm 765 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 709 x 457mm 678 x 508mm 919 x 508mm

Material £

Labour hours

Labour £

Unit

Total rate £

49.58 54.05 61.06 66.71 76.71 74.05 81.07 81.60 91.29 97.23 99.26 107.34 101.18 107.03 115.75

61.76 67.33 76.06 83.10 95.55 92.24 100.99 101.65 113.72 121.12 123.64 133.71 126.04 133.32 144.18

1.20 1.60 1.90 1.90 4.55 2.10 4.10 2.95 4.55 4.55 5.20 5.50 4.50 4.55 6.00

30.64 40.86 48.55 48.55 116.19 53.65 104.70 75.33 116.19 116.19 132.79 140.45 115.03 116.19 153.22

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

92.40 108.19 124.61 131.64 211.74 145.89 205.68 176.97 229.90 237.30 256.43 274.16 241.06 249.51 297.40

94.18 99.50 105.35 113.10 121.19 129.70 138.51 147.77 157.33 167.33 177.64 188.37 199.43 210.80 222.71 234.82 247.37 260.34 273.63 162.79 171.94

117.32 123.94 131.23 140.88 150.96 161.56 172.54 184.07 195.98 208.44 221.28 234.64 248.42 262.58 277.42 292.50 308.14 324.29 340.85 202.78 214.18

1.60 1.60 1.60 1.60 1.70 2.10 2.15 2.30 2.40 2.60 2.80 3.10 3.25 3.40 3.45 3.60 3.90 4.20 4.33 4.43 4.55

40.86 40.86 40.86 40.86 43.43 53.65 54.92 58.84 61.38 66.50 71.53 79.16 82.99 86.86 88.10 91.93 99.59 107.29 110.57 113.12 116.19

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

158.17 164.80 172.09 181.74 194.39 215.21 227.45 242.91 257.36 274.94 292.81 313.81 331.41 349.44 365.52 384.43 407.73 431.59 451.42 315.90 330.37

Fire damper; galvanised steel casing; stainless steel folding shutter; fusible link with manual reset; BS 476 4 hour fire rated Rectangular Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm

436

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: DUCTWORK: VOLUME/FIRE DAMPERS – cont'd DUCTWORK ANCILLARIES: VOLUME CONTROL AND FIRE DAMPERS – cont'd Fire damper; galvanised steel casing; stainless steel folding shutter; fusible link with manual reset; BS 476 4 hour fire rated – cont'd Circular 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia.

91.37 101.07 110.45 116.04 140.97 146.32 160.03 174.22 198.85 227.23 247.57 276.72 309.09 208.25

113.82 125.90 137.58 144.55 175.60 182.26 199.34 217.02 247.70 283.05 308.39 344.70 385.02 259.41

0.80 0.90 1.05 1.20 1.35 1.65 1.90 2.10 2.95 4.55 5.20 5.80 6.40 7.00

20.43 22.98 26.81 30.66 34.51 42.14 48.55 53.65 75.33 116.19 132.79 148.11 163.43 178.75

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

134.24 148.88 164.40 175.20 210.11 224.40 247.89 270.66 323.03 399.24 441.17 492.81 548.45 438.16

Flat oval 345 x 102mm 427 x 102mm 508 x 102mm 559 x 152mm 531 x 203mm 851 x 203mm 582 x 254mm 632 x 305mm 765 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 709 x 457mm 678 x 508mm

109.07 113.62 115.79 128.06 138.17 151.82 151.25 164.44 180.00 191.03 193.29 202.81 149.93 155.79

135.86 141.53 144.23 159.52 172.11 189.12 188.41 204.84 224.22 237.96 240.77 252.63 186.76 194.06

1.20 1.35 1.60 1.90 1.90 4.55 2.10 2.95 4.55 4.55 5.20 5.50 4.50 4.55

30.66 34.51 40.86 48.55 48.55 116.19 53.65 75.33 116.19 116.19 132.79 140.45 115.03 116.19

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

166.52 176.04 185.09 208.07 220.66 305.30 242.05 280.17 340.41 354.15 373.56 393.08 301.79 310.25

Material Costs/Prices for Measured Works – Mechanical Installations

437

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Smoke/fire damper; galvanised steel casing; stainless steel folding shutter; fusible link and 24V d.c. electro-magnetic shutter release mechanism; spring operated; BS 476 4 hour fire rating Rectangular Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

300.97 301.82 302.67 310.32 318.30 326.60 335.10 343.92 353.06 362.42 372.09 382.08 392.29 402.81 413.65 424.70 436.08 447.66 459.57

374.91 375.96 377.02 386.55 396.49 406.83 417.42 428.41 439.79 451.45 463.50 475.94 488.66 501.76 515.27 529.03 543.21 557.63 572.47

1.60 1.60 1.60 1.60 1.70 2.10 2.15 2.30 2.40 2.60 2.80 3.10 3.25 3.40 3.45 3.60 3.90 4.20 4.33

40.86 40.86 40.86 40.86 43.43 53.65 54.92 58.84 61.38 66.50 71.53 79.16 82.99 86.86 88.10 91.93 99.59 107.29 110.57

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

415.76 416.82 417.88 427.41 439.92 460.48 472.33 487.24 501.17 517.95 535.03 555.10 571.65 588.62 603.36 620.96 642.80 664.93 683.04

Circular 100mm dia. 160mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 900mm dia. 1000mm dia.

319.27 319.27 319.27 325.18 331.31 347.23 360.37 366.81 380.28 418.03 434.60 464.81 492.81 524.64

397.70 397.70 397.70 405.06 412.70 432.53 448.90 456.92 473.70 520.72 541.36 578.99 613.87 653.52

0.80 0.90 1.05 1.20 1.35 1.65 1.90 2.10 2.95 4.55 5.20 5.80 6.40 7.00

20.43 22.98 26.81 30.66 34.51 42.14 48.55 53.65 75.33 116.19 132.79 148.11 163.43 178.75

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

418.13 420.68 424.51 435.72 447.21 474.67 497.44 510.57 549.03 636.91 674.15 727.10 777.30 832.27

Flat oval 531 x 203mm 851 x 203mm 582 x 254mm 632 x 305mm 765 x 356mm 737 x 406mm 818 x 406mm 978 x 406mm 709 x 457mm 678 x 508mm

397.74 417.13 411.14 424.54 441.70 452.08 455.62 470.04 458.81 468.97

495.45 519.60 512.14 528.83 550.21 563.14 567.55 585.51 571.52 584.18

1.90 4.55 2.10 2.95 4.55 4.55 5.20 5.50 4.50 4.55

48.55 116.19 53.65 75.33 116.19 116.19 132.79 140.45 115.03 116.19

nr nr nr nr nr nr nr nr nr nr

543.99 635.79 565.79 604.16 666.40 679.33 700.33 725.96 686.55 700.36

438

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

0.60 0.60 0.65 0.72 0.72 0.80 0.88 1.04 0.88 0.94 1.04 1.12 1.26 1.40 1.61 1.76 2.17 1.76 2.17 3.00 2.60 3.00 3.80 3.80 4.61 4.61 4.61

15.32 15.32 16.60 18.39 18.39 20.43 22.47 26.56 22.47 24.00 26.56 28.60 32.18 35.75 41.11 44.94 55.41 44.94 55.41 76.61 66.39 76.61 97.04 97.04 117.72 117.72 117.72

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

Total rate £

U10: GRILLES/DIFFUSERS/LOUVRES Y46 – GRILLES/DIFFUSERS/LOUVRES Supply grilles; single deflection; extruded aluminium alloy frame and adjustable horizontal vanes; silver grey polyester powder coated; screw fixed Rectangular; for duct, ceiling and sidewall 150 x 100mm 150 x 150mm 200 x 150mm 200 x 200mm 300 x 100mm 300 x 150mm 300 x 200mm 300 x 300mm 400 x 100mm 400 x 150mm 400 x 200mm 400 x 300mm 600 x 200mm 600 x 300mm 600 x 400mm 600 x 500mm 600 x 600mm 800 x 300mm 800 x 400mm 800 x 600mm 1000 x 300mm 1000 x 400mm 1000 x 600mm 1000 x 800mm 1200 x 600mm 1200 x 800mm 1200 x 1000mm

11.04 11.52 12.48 12.96 12.48 12.96 15.36 16.32 13.92 14.40 17.76 20.64 22.56 28.80 36.00 41.28 50.40 35.04 42.72 58.56 39.36 48.96 68.16 108.14 109.50 137.97 164.26

13.75 14.35 15.55 16.14 15.55 16.14 19.13 20.33 17.34 17.94 22.12 25.71 28.10 35.87 44.84 51.42 62.78 43.65 53.21 72.95 49.03 60.99 84.90 134.71 136.40 171.86 204.61

29.07 29.67 32.14 34.53 33.93 36.57 41.60 46.89 39.81 41.94 48.68 54.31 60.28 71.63 85.96 96.36 118.19 88.59 108.63 149.55 115.42 137.60 181.94 231.74 254.12 289.58 322.33

Material Costs/Prices for Measured Works – Mechanical Installations

439

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

0.72 0.72 0.83 0.90 0.90 0.98 1.06 1.20 1.06 1.13 1.20 1.34 1.50 1.66 1.80 2.00 2.60 2.00 2.60 3.61 3.00 3.61 4.61 4.61 5.62 6.10 6.50

18.40 18.40 21.21 22.98 22.98 25.03 27.08 30.66 27.08 28.85 30.66 34.23 38.34 42.42 46.01 51.07 66.50 51.07 66.50 92.19 76.68 92.19 117.68 117.68 143.46 155.77 165.98

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

Total rate £

Rectangular; for duct, ceiling and sidewall applications; including opposed blade damper volume regulator 150 x 100mm 150 x 150mm 200 x 150mm 200 x 200mm 300 x 100mm 300 x 150mm 300 x 200mm 300 x 300mm 400 x 100mm 400 x 150mm 400 x 200mm 400 x 300mm 600 x 200mm 600 x 300mm 600 x 400mm 600 x 500mm 600 x 600mm 800 x 300mm 800 x 400mm 800 x 600mm 1000 x 300mm 1000 x 400mm 1000 x 600mm 1000 x 800mm 1200 x 600mm 1200 x 800mm 1200 x 1000mm

17.76 18.72 20.64 21.12 21.12 22.56 24.96 27.36 23.52 25.44 27.36 31.68 36.96 41.28 52.32 60.00 64.80 61.44 70.08 90.72 71.04 85.44 112.80 192.99 142.08 227.73 261.11

22.12 23.32 25.71 26.31 26.31 28.10 31.09 34.08 29.30 31.69 34.08 39.46 46.04 51.42 65.17 74.74 80.72 76.53 87.30 113.01 88.49 106.43 140.51 240.40 176.98 283.67 325.25

40.52 41.72 46.92 49.29 49.29 53.13 58.17 64.74 56.38 60.54 64.74 73.69 84.38 93.84 111.18 125.81 147.22 127.61 153.80 205.19 165.18 198.62 258.19 358.08 320.44 439.44 491.24

440

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

0.88 0.88 1.08 1.25 1.25 1.50 1.75 2.15 1.75 1.95 2.15 2.55 3.01 3.36 3.80 4.20 4.51 4.20 4.51 5.10 4.80 5.10 5.72 5.72 6.33 6.33 6.33

22.47 22.47 27.58 31.92 31.92 38.30 44.69 54.90 44.69 49.80 54.90 65.12 76.86 85.80 97.04 107.25 115.17 107.25 115.17 130.23 122.57 130.23 146.07 146.07 161.64 161.64 161.64

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

Total rate £

U10: GRILLES/DIFFUSERS/LOUVRES – cont'd Supply grilles; double deflection; extruded aluminium alloy frame and adjustable horizontal and vertical vanes; white polyester powder coated; screw fixed Rectangular; for duct, ceiling and sidewall applications 150 x 100mm 150 x 150mm 200 x 150mm 200 x 200mm 300 x 100mm 300 x 150mm 300 x 200mm 300 x 300mm 400 x 100mm 400 x 150mm 400 x 200mm 400 x 300mm 600 x 200mm 600 x 300mm 600 x 400mm 600 x 500mm 600 x 600mm 800 x 300mm 800 x 400mm 800 x 600mm 1000 x 300mm 1000 x 400mm 1000 x 600mm 1000 x 800mm 1200 x 600mm 1200 x 800mm 1200 x 1000mm

11.04 11.04 12.48 14.40 14.40 14.40 16.32 20.64 17.76 17.76 19.20 24.00 27.36 34.56 42.24 50.40 59.04 48.00 59.04 85.44 109.50 36.43 51.89 192.99 61.16 240.79 273.86

13.75 13.75 15.55 17.94 17.94 17.94 20.33 25.71 22.12 22.12 23.92 29.90 34.08 43.05 52.62 62.78 73.54 59.79 73.54 106.43 136.40 45.38 64.64 240.40 76.18 299.94 341.14

36.22 36.22 43.12 49.86 49.86 56.24 65.02 80.61 66.81 71.92 78.82 95.01 110.94 128.85 149.65 170.03 188.71 167.04 188.71 236.66 258.97 175.61 210.70 386.47 237.83 461.58 502.78

Material Costs/Prices for Measured Works – Mechanical Installations

441

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Rectangular; for duct, ceiling and sidewall applications; including opposed blade damper volume regulator 150 x 100mm 150 x 150mm 200 x 150mm 200 x 200mm 300 x 100mm 300 x 150mm 300 x 200mm 300 x 300mm 400 x 100mm 400 x 150mm 400 x 200mm 400 x 300mm 600 x 200mm 600 x 300mm 600 x 400mm 600 x 500mm 600 x 600mm 800 x 300mm 800 x 400mm 800 x 600mm 1000 x 300mm 1000 x 400mm 1000 x 600mm 1000 x 800mm 1200 x 600mm 1200 x 800mm 1200 x 1000mm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

19.20 20.64 22.08 24.96 23.52 26.40 28.32 31.68 27.36 30.24 33.12 38.40 42.72 50.40 58.56 63.36 77.28 65.28 78.72 120.48 84.00 101.76 155.04 224.88 188.16 263.37 296.58

23.92 25.71 27.50 31.09 29.30 32.89 35.28 39.46 34.08 37.67 41.26 47.83 53.21 62.78 72.95 78.92 96.26 81.32 98.06 150.08 104.64 126.76 193.13 280.12 234.38 328.07 369.44

1.00 1.00 1.26 1.43 1.43 1.68 1.93 2.31 1.93 2.14 2.31 2.77 3.25 3.62 3.99 4.44 4.94 4.44 4.94 5.71 5.20 5.71 6.53 6.53 7.34 8.80 8.80

25.54 25.54 32.18 36.52 36.52 42.90 49.28 58.99 49.28 54.65 58.99 70.73 82.99 92.44 101.89 113.38 126.15 113.38 126.15 145.81 132.79 145.81 166.75 166.75 187.43 224.72 224.72

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

49.45 51.25 59.68 67.61 65.81 75.79 84.56 98.45 83.37 92.32 100.24 118.57 136.21 155.22 174.83 192.30 222.41 194.70 224.21 295.89 237.42 272.57 359.88 446.87 421.82 552.79 594.15

159.36 22.56

198.51 28.10

0.70 -

17.88 -

nr nr

216.38 -

0° fixed blade core 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm 350 x 350mm

9.12 11.81 13.15 16.32 20.95

11.36 14.71 16.38 20.33 26.10

0.60 0.72 0.80 1.00 1.20

15.38 18.40 20.43 25.54 30.64

nr nr nr nr nr

26.74 33.11 36.81 45.87 56.74

0° fixed blade core; including opposed blade damper volume regulator 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm 350 x 350mm

14.35 18.24 21.84 25.73 34.30

17.88 22.72 27.21 32.05 42.73

0.62 0.72 0.80 1.00 1.20

15.84 18.40 20.43 25.54 30.64

nr nr nr nr nr

33.72 41.12 47.63 57.59 73.37

Floor grille suitable for mounting in raised access floors; heavy duty; extruded aluminium; standard mill finish; complete with opposed blade volume control damper Diffuser 600mm x 600mm Extra for nylon coated black finish Exhaust grilles; aluminium

442

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: GRILLES/DIFFUSERS/LOUVRES – cont'd Exhaust grilles; aluminium – cont'd 45° fixed blade core 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm 350 x 350mm

10.08 11.52 12.96 18.24 21.60

12.56 14.35 16.14 22.72 26.91

0.62 0.72 0.80 1.00 1.20

15.84 18.40 20.43 25.54 30.64

nr nr nr nr nr

28.40 32.75 36.57 48.26 57.55

45° fixed blade core; including opposed blade damper volume regulator 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm 350 x 350mm

16.80 20.16 21.60 28.32 30.72

20.93 25.11 26.91 35.28 38.27

0.62 0.72 0.80 1.00 1.20

15.84 18.40 20.43 25.54 30.64

nr nr nr nr nr

36.77 43.51 47.33 60.81 68.91

Eggcrate core 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm 350 x 350mm

11.52 12.96 16.32 20.16 23.04

14.35 16.14 20.33 25.11 28.70

0.62 1.00 0.80 1.00 1.20

15.84 25.54 20.43 25.54 30.64

nr nr nr nr nr

30.19 41.68 40.76 50.65 59.34

Eggcrate core; including opposed blade damper volume regulator 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm 350 x 350mm

12.96 19.20 23.04 26.88 33.12

16.14 23.92 28.70 33.48 41.26

0.62 0.72 0.80 1.00 1.20

15.84 18.40 20.43 25.54 30.64

nr nr nr nr nr

31.98 42.32 49.13 59.02 71.90

Mesh/perforated plate core 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm 350 x 350mm

24.48 17.76 20.64 24.48 27.36

30.49 22.12 25.71 30.49 34.08

0.62 0.72 0.80 1.00 1.20

15.83 18.39 20.43 25.54 30.64

nr nr nr nr nr

46.33 40.51 46.14 56.03 64.72

Mesh/perforated plate core; including opposed blade damper volume regulator 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm 350 x 350mm

13.91 17.58 27.03 33.06 46.23

17.33 21.90 33.67 41.18 57.59

0.62 0.72 0.80 0.80 1.20

15.83 18.39 20.43 20.43 30.64

nr nr nr nr nr

33.16 40.28 54.10 61.61 88.23

Material Costs/Prices for Measured Works – Mechanical Installations

443

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Plastic air diffusion system Eggcrate grilles 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm

3.75 5.91 6.57 7.27

4.67 7.36 8.18 9.06

0.62 0.72 0.80 1.00

15.28 17.75 19.71 24.64

nr nr nr nr

19.95 25.11 27.89 33.69

Single deflection grilles 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm

5.91 5.91 6.57 7.27

7.36 7.36 8.18 9.06

0.62 0.72 0.80 1.00

15.28 17.75 19.71 24.64

nr nr nr nr

22.64 25.11 27.89 33.69

Double deflection grilles 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm

5.91 9.66 10.91 14.97

7.36 12.03 13.59 18.65

0.62 0.72 0.80 1.00

15.28 17.75 19.71 24.64

nr nr nr nr

22.64 29.78 33.30 43.29

Door transfer grilles 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm

5.50 6.50 9.94 12.02

6.85 8.10 12.38 14.97

0.62 0.72 0.80 1.00

15.28 17.75 19.71 24.64

nr nr nr nr

22.13 25.85 32.09 39.61

2.76 3.61 3.61 4.63

3.44 4.50 4.50 5.77

0.62 0.72 0.80 1.00

15.28 17.75 19.71 24.64

nr nr nr nr

18.72 22.25 24.21 30.41

25.80 31.20 48.00 59.40 97.80

32.14 38.86 59.79 73.99 121.83

0.80 1.10 1.40 1.50 2.00

20.43 28.09 35.77 38.34 51.07

nr nr nr nr nr

52.57 66.96 95.56 112.33 172.90

28.20 33.60 51.60 66.00 109.20

35.13 41.85 64.28 82.21 136.03

1.00 1.20 1.60 1.90 2.40

25.54 30.66 40.86 48.55 61.38

nr nr nr nr nr

60.66 72.51 105.13 130.76 197.41

Opposed blade dampers 150 x 150mm 200 x 200mm 250 x 250mm 300 x 300mm Ceiling mounted diffusers; circular aluminium multi-core diffuser Circular; for ceiling mounting 141mm dia. neck 197mm dia. neck 309mm dia. neck 365mm dia. neck 477mm dia. neck Circular; for ceiling mounting; including louvre damper volume control 141mm dia. neck 197mm dia. neck 309mm dia. neck 365mm dia. neck 477mm dia. neck

444

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: GRILLES/DIFFUSERS/LOUVRES – cont'd Ceiling mounted diffusers; rectangular aluminium multi-cone diffuser; four way applications flow Rectangular; for ceiling mounting 150 x 150 mm neck 300 x 150 mm neck 300 x 300 mm neck 450 x 150 mm neck 450 x 300 mm neck 450 x 450 mm neck 600 x 150 mm neck 600 x 300 mm neck 600 x 600 mm neck

23.04 34.95 33.60 44.18 49.63 48.48 53.39 61.00 71.04

28.70 43.54 41.85 55.03 61.82 60.39 66.51 75.98 88.49

1.80 2.30 2.80 2.80 3.20 3.40 3.20 3.50 4.00

46.01 58.73 71.50 71.50 81.72 86.86 81.72 89.38 102.14

nr nr nr nr nr nr nr nr nr

74.71 102.27 113.35 126.53 143.54 147.25 148.22 165.36 190.64

Rectangular; for ceiling mounting; including opposed blade damper volume regulator 150 x 150 mm neck 300 x 150 mm neck 300 x 300 mm neck 450 x 150 mm neck 450 x 300 mm neck 450 x 450 mm neck 600 x 150 mm neck 600 x 300 mm neck 600 x 600 mm neck

33.12 34.95 46.56 56.90 65.89 67.20 67.25 79.19 97.92

41.26 43.54 58.00 70.88 82.08 83.71 83.77 98.64 121.97

1.80 2.30 2.80 2.80 3.30 3.51 3.30 4.00 5.62

46.01 58.73 71.53 71.50 84.27 89.60 84.27 102.14 143.46

nr nr nr nr nr nr nr nr nr

87.27 102.27 129.53 142.38 166.35 173.31 168.04 200.79 265.44

Diffuser 1 slot 2 slot 3 slot 4 slot 6 slot

11.36 20.02 26.78 33.27 47.34

14.15 24.94 33.36 41.44 58.97

3.76 3.76 3.76 4.50 4.50

96.00 95.97 95.97 115.03 115.03

m m m m m

110.15 120.91 129.33 156.47 174.00

Diffuser; including equalizing deflector 1 slot 2 slot 3 slot 4 slot 6 slot

23.52 42.24 56.16 69.60 98.88

29.30 52.62 69.96 86.70 123.17

5.26 5.26 5.26 6.33 6.33

134.40 134.40 134.40 161.62 161.62

m m m m m

163.70 187.02 204.36 248.32 284.79

Extra over for ends 1 slot 2 slot 3 slot 4 slot 6 slot

7.20 9.45 10.80 12.15 14.85

8.97 11.77 13.45 15.13 18.50

1.00 1.00 1.00 1.30 1.40

25.54 25.54 25.54 33.20 35.75

nr nr nr nr nr

34.50 37.31 38.99 48.33 54.25

Slot diffusers; continuous aluminium slot diffuser with flanged frame (1500mm sections)

Material Costs/Prices for Measured Works – Mechanical Installations

445

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Plenum boxes; 1.0m long; circular spigot; including cord operated flap damper 1 slot 2 slot 3 slot 4 slot 6 slot

24.00 24.00 25.60 26.00 27.60

29.90 29.90 31.89 32.39 34.38

2.75 2.75 2.75 3.51 3.51

70.35 70.35 70.35 89.60 89.60

nr nr nr nr nr

100.24 100.24 102.24 121.99 123.98

Plenum boxes; 2.0m long; circular spigot; including cord operated flap damper 1 slot 2 slot 3 slot 4 slot 6 slot

30.80 30.80 32.40 33.60 34.40

68.26 38.37 40.36 41.85 42.85

3.26 3.26 3.26 3.76 3.76

83.18 83.18 83.18 96.00 96.00

nr nr nr nr nr

151.44 121.54 123.54 137.85 138.85

Circular spigot; rectangular diffuser 150mm dia. spigot; 300 x 300 diffuser 300mm dia. spigot; 600 x 600 diffuser

62.88 115.68

78.33 144.10

1.00 1.40

25.54 35.77

nr nr

103.86 179.86

Circular spigot; rectangular diffuser; including louvre damper volume regulator 150mm dia. spigot; 300 x 300 diffuser 300mm dia. spigot; 600 x 600 diffuser

79.68 133.92

99.25 166.82

1.00 1.60

25.54 40.86

nr nr

124.79 207.68

35.15

43.78

1.00

24.64

nr

68.42

46.49

57.91

1.20

29.57

nr

87.48

50.66

63.10

1.40

34.49

nr

97.60

53.82

67.04

1.60

39.42

nr

106.46

40.10

49.95

1.20

29.57

nr

79.52

55.49

69.12

1.40

34.51

nr

103.63

60.58

75.46

1.60

39.42

nr

114.88

68.05

84.77

1.80

44.35

nr

129.12

Perforated diffusers; rectangular face aluminium perforated diffuser; quick release face plate; for integration with rectangular ceiling tiles

Rectangular spigot; rectangular diffuser 150 x 150mm dia. spigot; 300 x 300mm diffuser 300 x 150mm dia. spigot; 600 x 300mm diffuser 300 x 300mm dia. spigot; 600 x 600mm diffuser 600 x 300mm dia. spigot; 1200 x 600mm diffuser Rectangular spigot; rectangular diffuser; including opposed blade damper volume regulator 150 x 150mm dia. spigot; 300 x 300mm diffuser 300 x 150mm dia. spigot; 600 x 300mm diffuser 300 x 300mm dia. spigot; 600 x 600mm diffuser 600 x 300mm dia. spigot; 1200 x 600mm diffuser

446

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: GRILLES/DIFFUSERS/LOUVRES – cont'd Floor swirl diffuser; manual adjustment of air discharge direction; complete with damper and dirt trap Plastic Diffuser 150 dia 200 dia

20.35 26.40

25.35 32.89

0.50 0.50

12.77 12.77

nr nr

38.12 45.65

Aluminium Diffuser 150 dia 200 dia

24.75 30.80

30.83 38.37

0.50 0.50

12.77 12.77

nr nr

43.60 51.13

Cellular diffusers 300 x 300mm 600 x 600mm

6.12 12.29

7.62 15.31

2.80 4.00

69.01 98.55

nr nr

76.64 113.86

Multi-cone diffusers 300 x 300mm 450 x 450mm 500 x 500mm 600 x 600mm 625 x 625mm

4.97 9.76 10.45 13.26 23.08

6.19 12.16 13.02 16.52 28.75

2.80 3.40 3.80 4.00 4.26

69.01 83.81 93.68 98.55 104.84

nr nr nr nr nr

75.21 95.96 106.70 115.07 133.59

Opposed blade dampers 300 x 300mm 450 x 450mm 600 x 600mm

5.98 8.57 16.77

7.45 10.68 20.89

1.20 1.50 2.60

29.58 36.99 64.16

nr nr nr

37.03 47.67 85.05

Plenum boxes 300mm 450mm 600mm

3.56 5.12 8.53

4.43 6.38 10.63

2.80 3.40 4.00

69.01 83.81 98.55

nr nr nr

73.45 90.18 109.18

Plenum spigot reducer 600mm

4.71

5.87

1.00

24.64

nr

30.51

Blanking kits for cellular diffusers 300mm 600mm

1.34 4.83

1.67 6.02

0.88 1.10

21.69 27.10

nr nr

23.36 33.12

Blanking kits for multi-cone diffusers 300mm 450mm 600mm

1.34 2.87 4.83

1.67 3.58 6.02

0.88 0.90 1.10

21.69 22.18 27.10

nr nr nr

23.36 25.75 33.12

Plastic air diffusion system

Material Costs/Prices for Measured Works – Mechanical Installations

447

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Acoustic louvres; opening mounted; 300mm deep steel louvres with blades packed with acoustic infill; 12mm galvanised mesh birdscreen; screw fixing in opening Louvre units; self finished galvanised steel 900 high x 600 wide 900 high x 900 wide 900 high x 1200 wide 900 high x 1500 wide 900 high x 1800 wide 900 high x 2100 wide 900 high x 2400 wide 900 high x 2700 wide 900 high x 3000 wide 1200 high x 600 wide 1200 high x 900 wide 1200 high x 1200 wide 1200 high x 1500 wide 1200 high x 1800 wide 1200 high x 2100 wide 1200 high x 2400 wide 1500 high x 600 wide 1500 high x 900 wide 1500 high x 1200 wide 1500 high x 1500 wide 1500 high x 1800 wide 1500 high x 2100 wide 1800 high x 600 wide 1800 high x 900 wide 1800 high x 1200 wide 1800 high x 1500 wide

107.25 133.07 157.54 205.61 230.54 255.46 279.93 316.43 338.68 140.63 173.12 205.16 271.93 303.97 336.90 368.95 174.46 214.07 253.67 338.24 377.85 417.91 207.39 254.56 302.18 404.99

133.60 165.76 196.25 256.12 287.18 318.21 348.69 394.16 421.88 175.18 215.65 255.56 338.73 378.64 419.66 459.58 217.31 266.66 315.99 421.33 470.67 520.57 258.33 317.10 376.42 504.48

3.00 3.00 3.34 3.34 3.34 3.34 3.68 3.68 3.68 3.00 3.34 3.34 3.34 3.68 3.68 3.68 3.00 3.34 3.34 3.68 3.68 4.00 3.34 3.34 3.68 3.68

73.92 73.92 82.29 82.29 82.29 82.29 90.67 90.67 90.67 73.92 82.29 82.29 82.29 90.67 90.67 90.67 73.92 82.29 82.29 90.67 90.67 98.55 82.29 82.29 90.67 90.67

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

207.52 239.68 278.54 338.42 369.47 400.50 439.36 484.83 512.55 249.10 297.95 337.86 421.02 469.31 510.33 550.25 291.23 348.95 398.28 512.00 561.34 619.12 340.63 399.39 467.09 595.15

Louvre units; polyester powder coated steel 900 high x 600 wide 900 high x 900 wide 900 high x 1200 wide 900 high x 1500 wide 900 high x 1800 wide 900 high x 2100 wide 900 high x 2400 wide 900 high x 2700 wide 900 high x 3000 wide 1200 high x 600 wide 1200 high x 900 wide 1200 high x 1200 wide 1200 high x 1500 wide 1200 high x 1800 wide 1200 high x 2100 wide 1200 high x 2400 wide 1500 high x 600 wide 1500 high x 900 wide 1500 high x 1200 wide 1500 high x 1500 wide 1500 high x 1800 wide 1500 high x 2100 wide 1800 high x 600 wide 1800 high x 900 wide 1800 high x 1200 wide 1800 high x 1500 wide

155.77 205.16 253.67 325.77 374.72 424.13 472.63 532.72 579.01 204.72 269.25 333.78 432.13 496.22 561.20 625.28 254.56 334.22 413.89 538.51 618.62 698.28 303.51 398.75 494.45 645.32

194.04 255.56 315.99 405.80 466.78 528.33 588.74 663.58 721.24 255.01 335.40 415.78 538.29 618.12 699.07 778.89 317.10 416.33 515.57 670.79 770.58 869.82 378.07 496.71 615.92 803.84

3.00 3.00 3.34 3.34 3.34 3.34 3.68 3.68 3.68 3.00 3.34 3.34 3.34 3.68 3.68 3.68 3.00 3.34 3.34 3.68 3.68 4.00 3.34 3.34 3.68 3.68

73.92 73.92 82.29 82.29 82.29 82.29 90.67 90.67 90.67 73.92 82.29 82.29 82.29 90.67 90.67 90.67 73.92 82.29 82.29 90.67 90.67 98.55 82.29 82.29 90.67 90.67

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

267.95 329.48 398.28 488.09 549.07 610.62 679.41 754.25 811.91 328.93 417.69 498.07 620.58 708.79 789.74 869.56 391.02 498.62 597.86 761.46 861.25 968.37 460.36 579.00 706.59 894.51

448

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

2.25 2.25 2.50 2.50 2.50 2.50 2.76 2.76 2.76 2.25 2.50 2.50 2.50 2.76 2.76 2.76 2.25 2.50 2.50 2.76 2.76 3.00 2.50 2.50 2.76 3.00

55.49 55.49 61.60 61.60 61.60 61.60 68.06 68.06 68.06 55.49 61.60 61.60 61.60 68.06 68.06 68.06 55.49 61.60 61.60 68.06 68.06 73.99 61.60 61.60 68.06 73.99

Unit

Total rate £

U10: GRILLES/DIFFUSERS/LOUVRES – cont'd Weather louvres; opening mounted; 300mm deep galvanised steel louvres; screw fixing in position Louvre units; including 12mm galvanised mesh 900 x 600mm 900 x 900mm 900 x 1200mm 900 x 1500mm 900 x 1800mm 900 x 2100mm 900 x 2400mm 900 x 2700mm 900 x 3000mm 1200 x 600mm 1200 x 900mm 1200 x 1200mm 1200 x 1500mm 1200 x 1800mm 1200 x 2100mm 1200 x 2400mm 1500 x 600mm 1500 x 900mm 1500 x 1200mm 1500 x 1500mm 1500 x 1800mm 1500 x 2100mm 1800 x 600mm 1800 x 900mm 1800 x 1200mm 1800 x 1500mm

101.16 146.16 175.86 214.02 252.19 316.11 339.58 383.37 418.68 137.00 191.43 246.28 287.48 375.97 427.58 446.53 161.92 223.13 293.91 344.59 406.31 508.18 181.13 250.39 328.33 388.38

126.01 182.07 219.06 266.60 314.14 393.76 423.00 477.55 521.53 170.65 238.46 306.78 358.10 468.33 532.62 556.22 201.70 277.94 366.11 429.24 506.12 633.02 225.63 311.90 408.99 483.79

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

181.50 237.56 280.66 328.19 375.74 455.36 491.06 545.61 589.59 226.15 300.05 368.38 419.70 536.39 600.68 624.28 257.19 339.54 427.71 497.30 574.18 707.01 287.22 373.50 477.05 557.78

Material Costs/Prices for Measured Works – Mechanical Installations

449

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: PLANT/EQUIPMENT Y41 – FANS Axial flow fan; including ancillaries, anti vibration mountings, mounting feet, matching flanges, flexible connectors and clips; 415V, 3 phase, 50Hz motor; includes fixing in position; electrical work elsewhere Aerofoil blade fan unit; short duct case 315mm dia.; 0.47 m3/s duty; 147 Pa 500mm dia.; 1.89 m3/s duty; 500 Pa 560mm dia.; 2.36 m3/s duty; 147 Pa 710mm dia.; 5.67 m3/s duty; 245 Pa

540.00 744.00 723.00 1118.00

672.65 926.77 900.61 1392.64

4.50 1.00 5.50 6.00

110.87 24.64 135.51 147.83

nr nr nr nr

783.53 951.41 1036.12 1540.47

Aerofoil blade fan unit; long duct case 315mm dia.; 0.47 m3/s duty; 147 Pa 500mm dia.; 1.89 m3/s duty; 500 Pa 560mm dia.; 2.36 m3/s duty; 147 Pa 710mm dia.; 5.67 m3/s duty; 245 Pa

621.00 790.00 752.00 1183.00

773.55 984.07 936.73 1473.61

4.50 5.00 5.50 6.00

110.87 123.19 135.51 147.83

nr nr nr nr

884.43 1107.26 1072.24 1621.44

Aerofoil blade fan unit; two stage parallel fan arrangement; long duct case 315mm; 0.47m3/s @ 500 Pa 355mm; 0.83m3/s @ 147 Pa 710mm; 3.77m3/s @ 431 Pa 710mm; 6.61m3/s @ 500 Pa

1093.00 1047.00 2004.00 2498.00

1361.50 1304.20 2496.30 3111.65

4.50 4.75 6.00 6.00

110.87 117.03 147.83 147.83

nr nr nr nr

1472.38 1421.23 2644.13 3259.48

630.00 1716.00 2002.00 4830.00

784.76 2137.55 2493.80 6016.52

5.00 5.50 6.50 7.50

123.19 135.51 160.15 184.79

nr nr nr nr

907.96 2273.06 2653.95 6201.31

1060.00 1596.00 1875.00 3585.00

1320.40 1988.07 2335.61 4465.68

4.50 5.00 5.50 6.50

110.87 123.19 135.51 160.15

nr nr nr nr

1431.27 2111.26 2471.12 4625.83

Axial flow fan; suitable for operation at 300°C for 90 minutes; including ancillaries, anti vibration mountings, mounting feet, matching flanges, flexible connectors and clips; 415V, 3 phase, 50Hz motor; includes fixing in position; electrical work elsewhere 450mm; 2.0m3/s @ 300Pa 630mm; 4.6m3/s @ 200Pa 900mm; 9.0m3/s @ 300Pa 1000mm; 15.0m3/s @ 400Pa Bifurcated fan; suitable for temperature up to 200°C with motor protection to IP55; including ancillaries, anti vibration mountings, mounting feet, matching flanges, flexible connectors and clips; 415V, 3 phase, 50Hz motor; includes fixing in position; electrical work elsewhere 300mm; 400mm; 630mm; 800mm;

0.50m3/s 1.97m3/s 3.86m3/s 6.10m3/s

@ @ @ @

100Pa 200Pa 200Pa 400Pa

Material Costs/Prices for Measured Works – Mechanical Installations

450

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: PLANT/EQUIPMENT – cont'd FANS – cont'd Duct mounted in line fan with backward curved centrifugal impellor; including ancillaries, matching flanges, flexible connectors and clips; 415V, 3phase, 50Hz motor; includes fixing in position; electrical work elsewhere 0.5m3/s 1.0m3/s 3.0m3/s 5.0m3/s 7.0m3/s

@ @ @ @ @

200Pa 300Pa 500Pa 750Pa 1000Pa

1232.59 1519.54 2510.84 3326.04 4043.42

1535.38 1892.82 3127.64 4143.10 5036.71

4.50 5.00 5.50 6.50 7.00

110.87 123.19 135.51 160.15 172.47

nr nr nr nr nr

1646.26 2016.02 3263.15 4303.25 5209.18

1700.84 227.95 1978.68 227.95 2256.36 227.95 6886.63 227.95 2925.60 227.95 214.54

2118.66 283.95 2464.76 283.95 2810.65 283.95 8578.37 283.95 3644.29 283.95 267.24

4.50 5.00 5.00 5.50 6.50 2.50

110.87 123.19 123.19 135.51 160.15 61.60

nr nr nr nr nr nr nr nr nr nr nr

2229.53 283.95 2587.95 283.95 2933.84 283.95 8713.88 283.95 3804.44 283.95 328.84

304.47 566.97 797.67 687.88 2292.94 2153.97 1910.78 3057.25 2918.29 2839.09

379.26 706.25 993.62 856.86 2856.22 2683.11 2380.18 3808.28 3635.19 3536.53

4.50 4.50 5.50 5.50 7.00 7.00 7.00 8.00 8.00 8.00

110.87 110.87 135.51 135.51 172.47 172.47 172.47 197.11 197.11 197.11

nr nr nr nr nr nr nr nr nr nr

490.14 817.12 1129.13 992.37 3028.68 2855.58 2552.64 4005.39 3832.29 3733.64

Twin fan extract unit; belt driven; located internally; complete with anti-vibration mounts and non return shutter; including ancillaries, matching flanges, flexible connectors and clips; 3 phase, 50Hz motor; includes fixing in position; electrical work elsewhere 0.25m3/s @ 150Pa Extra for external unit 0.50m3/s @ 200Pa Extra for external unit 1.00m3/s @ 200Pa Extra for external unit 1.50m3/s @ 250Pa Extra for external unit 2.00m3/s @ 250Pa Extra for external unit Extra for auto changeover panel Roof mounted extract fan; including ancillaries, fibreglass cowling, fitted shutters and bird guard; 415V, 3 phase, 50Hz motor; includes fixing in position; electrical work elsewhere Flat roof installation, fixed to curb 315mm; 900rpm 315mm; 1380rpm 400mm; 900rpm 400mm; 1360rpm 800mm; 530rpm 800mm; 700rpm 800mm; 920rpm 1000mm; 470rpm 1000mm; 570rpm 1000mm; 710rpm

Material Costs/Prices for Measured Works – Mechanical Installations

451

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Pitched roof installation; including purlin mounting box 315mm; 900rpm 315mm; 1380rpm 400mm; 900rpm 400mm; 1360rpm 800mm; 530rpm 800mm; 700rpm 800mm; 920rpm 1000mm; 470rpm 1000mm; 570rpm 1000mm; 710rpm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

630.29 630.29 874.17 764.38 2445.34 2306.37 2063.18 3282.65 3143.69 3064.47

785.12 785.12 1088.92 952.15 3046.05 2872.94 2570.01 4089.05 3915.96 3817.28

4.50 4.50 5.50 5.50 7.00 7.00 7.00 8.00 8.00 8.00

110.87 110.87 135.51 135.51 172.47 172.47 172.47 197.11 197.11 197.11

nr nr nr nr nr nr nr nr nr nr

896.00 896.00 1224.43 1087.67 3218.52 3045.41 2742.48 4286.16 4113.06 4014.38

Window mounted 245m3/hr 500m3/hr

84.29 269.87

97.05 621.43

0.50 0.50

12.32 12.32

nr nr

109.37 633.74

Wall mounted 245m3/hr 500m3/hr

221.46 435.53

365.68 1136.52

0.83 0.83

20.53 20.53

nr nr

386.21 1157.05

138.26 228.26

172.22 284.33

1.00 1.00

24.64 24.64

nr nr

196.86 308.97

Fan unit; fixed to wall; including shutter Single speed 85m3/hr Two speed 60-85m3/hr

92.59 115.13

115.34 143.41

0.75 0.83

18.48 20.53

nr nr

133.81 163.94

Humidity controlled; autospeed; fixed to wall; including shutter 30–60–85m3/hr

186.89

232.80

1.00

24.64

nr

257.44

Centrifugal fan; single speed for internal domestic kitchens/utility rooms; fitted with standard overload protection; complete with housing; includes placing in position; electrical work elsewhere

Centrifugal fan; various speeds, simultaneous ventilation from separate areas fitted with standard overload protection; complete with housing; includes placing in position; ducting and electrical work elsewhere Fan unit 147–300m3/hr 175-411m3/hr Toilet extract units; centrifugal fan; various speeds for internal domestic bathrooms/ W.Cs, with built in filter; complete with housing; includes placing in position; electrical work elsewhere

452

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: PLANT/EQUIPMENT – cont'd Y42 – AIR FILTRATION High efficiency duct mounted filters; 99.997% H13 (EU13); tested to BS 3928 Standard; 2100m3/ hr air volume; continuous rating up to 80°C; sealed wood case, aluminium spacers, neoprene gaskets; water repellant filter media; includes placing in position 610 x 610 x 292mm Side withdrawl frame

225.00 84.60

280.27 105.38

1.00 2.50

25.54 63.84

nr nr

305.81 169.22

High capacity; 3400m3/hr air volume; continuous rating up to 80°C; anti-corrosion coated mild steel frame, polyurethane sealant and neoprene gaskets; water repellant filter media; includes placing in position 610 x 610 x 292mm Side withdrawl frame

241.00 84.60

300.20 105.38

1.00 2.50

25.54 63.84

nr nr

325.74 169.22

17.64 18.18

21.97 22.65

1.00 2.00

25.54 51.07

nr nr

47.51 73.72

19.25 18.18

23.98 22.65

1.50 2.50

38.30 63.84

nr nr

62.28 86.49

20.85 18.18

25.97 22.65

1.50 3.00

38.30 76.61

nr nr

64.28 99.25

20.85 18.18

25.97 22.65

1.00 2.00

25.54 51.07

nr nr

51.51 73.72

22.46 18.18

27.98 22.65

1.50 2.50

38.30 63.84

nr nr

66.28 86.49

24.06 18.18

29.97 22.65

1.50 3.00

38.30 76.61

nr nr

68.27 99.25

Bag Filters; 40/60% F5 (EU5); tested to BSEN 779 Duct mounted bag filter; continuous rating up to 60°C; rigid filter assembly; sealed into one piece coated mild steel header with sealed pocket separators; includes placing in position 6 pocket, 592 x 592 x 25mm header; pockets 350mm long; 1690m3/hr Side withdrawl frame 6 pocket, 592 x 592 x 25mm header; pockets 500mm long; 2550m3/hr Side withdrawl frame 6 pocket, 592 x 592 x 25mm header; pockets 600mm long; 3380m3/hr Side withdrawl frame Bag Filters; 80/90% F7, (EU7); tested to BSEN 779 Duct mounted bag filter; continuous rating up to 60°C; rigid filter assembly; sealed into one piece coated mild steel header with sealed pocket separators; includes placing in position 6 pocket, 592 x 592 x 25mm header; pockets 500mm long; 1688m3/hr Side withdrawl frame 6 pocket, 592 x 592 x 25mm header; pockets 600mm long; 2047m3/hr Side withdrawl frame 6 pocket, 592 x 592 x 25mm header; pockets 700mm long; 2729m3/hr Side withdrawl frame

Material Costs/Prices for Measured Works – Mechanical Installations

453

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Grease filters, washable; minimum 65% Double sided extract unit; lightweight stainless steel construction; demountable composite filter media of woven metal mat and expanded metal mesh supports; for mounting on hood and extract systems (hood not included); includes placing in position 500 x 686 x 565mm, 4080m3/hr 1000 x 686 x 565mm, 8160m3/hr; 1500 x 686 x 565mm, 12240m3/hr;

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

359.30 547.93 751.56

413.67 630.85 865.29

2.00 3.00 3.50

51.07 76.61 89.38

nr nr nr

464.74 707.45 954.67

5.04 51.48 3.59 51.48

6.28 64.13 4.47 64.13

1.00 2.50 1.00 2.50

25.54 63.84 25.54 63.84

nr nr nr nr

31.81 127.97 30.01 127.97

10.29 64.93 7.94 51.48

12.82 80.88 9.89 64.13

1.00 3.00 1.00 3.00

25.54 76.61 25.54 76.61

nr nr nr nr

38.35 157.49 35.43 140.73

12 panels 597 x 597 x 298mm, 1460m3/hr 597 x 597 x 451mm, 2200m3/hr 597 x 597 x 597mm, 2930m3/hr

306.22 345.21 384.97

381.44 430.01 479.54

0.33 0.33 0.33

8.43 8.43 8.43

nr nr nr

389.87 438.44 487.97

8 panels 451 x 451 x 298mm, 740m3/hr 451 x 451 x 451mm, 1105m3/hr 451 x 451 x 597mm, 1460m3/hr

230.86 255.51 279.04

287.57 318.28 347.59

0.29 0.29 0.29

7.41 7.41 7.41

nr nr nr

294.98 325.68 354.99

6 panels 298 x 298 x 298mm, 365m3/hr 298 x 298 x 451mm, 550m3/hr 298 x 298 x 597mm, 780m3/hr

163.58 175.14 186.20

203.76 218.16 231.94

0.25 0.25 0.25

6.38 6.38 6.38

nr nr nr

210.15 224.55 238.33

Panel filters; 82% G3 (EU3); tested to BS EN779 Modular duct mounted filter panels; continuous rating up to 100°C; graduated density media; rigid cardboard frame; includes placing in position 596 x 596 x 47mm, 2360m3/hr Side withdrawl frame 596 x 287 x 47mm, 1140m3/hr Side withdrawl frame Panel filters; 90% G4 (EU4); tested to BS EN779 Modular duct mounted filter panels; continuous rating up to 100°C; pleated media with wire support; rigid cardboard frame; includes placing in position 596 x 596 x 47mm, 2560m3/hr side withdrawl frame 596 x 287 x 47mm, 1230m3/hr Side withdrawl frame Carbon filters; standard duty disposable carbon filters; steel frame with bonded carbon panels; for fixing to ductwork; including placing in position

454

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: SILENCERS/ACOUSTIC TREATMENT Y45 – SILENCERS/ACOUSTIC TREATMENT Attenuators; DW144 galvanised construction c/w splitters; self securing; fitted to ductwork To suit rectangular ducts; unit length 600mm 100 x 100mm 150 x 150mm 200 x 200mm 300 x 300mm 400 x 400mm 500 x 500mm 600 x 300mm 600 x 600mm 700 x 300mm 700 x 700mm 800 x 300mm 800 x 800mm 1000 x 1000mm

86.60 90.40 94.19 105.38 118.29 138.06 132.99 186.13 141.00 209.96 146.06 242.23 310.07

107.87 112.61 117.33 131.27 147.35 171.98 165.66 231.85 175.64 261.54 181.94 301.74 386.24

0.75 0.75 0.75 0.75 1.00 1.25 1.25 1.25 1.50 1.50 2.00 2.00 3.00

19.15 19.15 19.15 19.15 25.54 31.92 31.92 31.92 38.30 38.30 51.07 51.07 76.61

nr nr nr nr nr nr nr nr nr nr nr nr nr

127.03 131.76 136.48 150.42 172.88 203.90 197.58 263.77 213.94 299.84 233.01 352.81 462.85

To suit rectangular ducts; unit length 1200mm 200 x 200mm 300 x 300mm 400 x 400mm 500 x 500mm 600 x 300mm 600 x 600mm 700 x 300mm 700 x 700mm 800 x 300mm 800 x 800mm 1000 x 1000mm 1300 x 1300mm 1500 x 1500mm 1800 x 1800mm 2000 x 2000mm

103.86 128.41 154.39 186.35 177.69 259.97 190.47 297.50 199.13 343.28 464.69 797.67 913.02 1249.23 1401.78

129.37 159.95 192.32 232.13 221.34 323.83 237.26 370.58 248.05 427.61 578.84 993.62 1137.31 1556.11 1746.14

1.00 1.00 1.33 1.66 1.66 1.66 2.00 2.00 2.66 2.66 4.00 8.00 8.00 10.66 13.33

25.54 25.54 33.96 42.39 42.39 42.39 51.07 51.07 67.93 67.93 102.14 204.29 204.29 272.21 340.39

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

154.91 185.49 226.28 274.52 263.73 366.22 288.33 421.65 315.97 495.53 680.99 1197.91 1341.60 1828.33 2086.53

To suit rectangular ducts; unit length 1800mm 200 x 200mm 300 x 300mm 400 x 400mm 500 x 500mm 600 x 300mm 600 x 600mm 700 x 300mm 700 x 700mm 800 x 300mm 800 x 800mm 1000 x 1000mm 1300 x 1300mm 1500 x 1500mm 1800 x 1800mm 2000 x 2000mm 2300 x 2300mm 2500 x 2500mm

131.08 174.19 208.21 242.65 253.79 354.62 269.04 423.70 284.50 492.99 662.65 1107.00 1254.52 1972.19 1741.67 2465.20 3438.65

163.28 216.98 259.36 302.26 316.14 441.73 335.13 527.78 354.39 614.10 825.43 1378.94 1562.70 2456.67 2169.52 3070.79 4283.38

1.00 1.00 1.33 1.66 1.66 1.66 2.00 2.00 2.66 2.66 4.00 8.00 8.00 10.66 13.33 16.00 18.66

25.54 25.54 33.96 42.39 42.39 42.39 51.07 51.07 67.93 67.93 102.14 204.29 204.29 272.21 340.39 408.58 476.50

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

188.82 242.52 293.32 344.65 358.52 484.12 386.20 578.86 422.31 682.02 927.58 1583.23 1766.99 2728.88 2509.92 3479.37 4759.88

Material Costs/Prices for Measured Works – Mechanical Installations

455

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

To suit rectangular ducts; unit length 2400mm 500 x 500mm 600 x 300mm 600 x 600mm 700 x 300mm 700 x 700mm 800 x 300mm 800 x 800mm 1000 x 1000mm 1300 x 1300mm 1500 x 1500mm 1800 x 1800mm 2000 x 2000mm 2300 x 2300mm 2500 x 2500mm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

313.79 299.57 446.18 324.72 527.02 343.28 609.91 822.88 1332.81 1521.15 2170.40 2435.55 3013.32 4231.14

390.87 373.16 555.79 404.49 656.49 427.61 759.74 1025.03 1660.22 1894.83 2703.57 3033.86 3753.56 5270.55

2.08 2.08 2.08 2.50 2.50 3.33 3.33 5.00 10.00 10.00 13.33 16.66 20.00 23.32

53.19 53.19 53.19 63.84 63.84 85.03 85.03 127.68 255.36 255.36 340.34 425.43 510.72 595.60

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

444.07 426.35 608.98 468.33 720.33 512.64 844.77 1152.71 1915.58 2150.19 3043.92 3459.29 4264.28 5866.15

To suit circular ducts; unit length 600mm 100mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 1000mm dia.

75.21 88.49 100.31 116.76 135.11 145.23 175.38 193.10 227.67 247.92 275.76 370.17

93.69 110.23 124.95 145.44 168.30 180.91 218.46 240.54 283.60 308.82 343.50 461.10

0.75 0.75 0.75 1.00 1.00 1.00 1.00 1.26 1.50 1.50 2.00 3.00

19.15 19.15 19.15 25.54 25.54 25.54 25.54 32.12 38.30 38.30 51.07 76.61

nr nr nr nr nr nr nr nr nr nr nr nr

112.84 129.38 144.10 170.98 193.84 206.44 244.00 272.66 321.90 347.13 394.57 537.71

To suit circular ducts; unit length 1200mm 100mm dia. 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 1000mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

110.64 121.39 136.37 155.98 186.99 198.37 229.79 235.49 311.82 344.71 344.08 461.91 870.13 946.04 1048.81

137.82 151.21 169.87 194.30 232.93 247.10 286.24 293.34 388.42 429.39 428.61 575.38 1083.88 1178.44 1306.46

1.00 1.00 1.00 1.33 1.33 1.33 1.33 1.66 2.00 2.00 2.66 4.00 8.00 8.00 10.66

25.54 25.54 25.54 33.96 33.96 33.96 33.96 42.39 51.07 51.07 67.93 102.14 204.29 204.29 272.21

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

163.36 176.75 195.41 228.26 266.89 281.06 320.20 335.73 439.49 480.46 496.53 677.53 1288.17 1382.73 1578.67

456

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U10: SILENCERS/ACOUSTIC TREATMENT – cont'd SILENCERS/ACOUSTIC TREATMENT – cont'd Attenuators; DW144 galvanised construction c/w splitters; self securing; fitted to ductwork – cont'd To suit circular ducts; unit length 1800mm 200mm dia. 250mm dia. 315mm dia. 355mm dia. 400mm dia. 450mm dia. 500mm dia. 630mm dia. 710mm dia. 800mm dia. 1000mm dia. 1250mm dia. 1400mm dia. 1600mm dia.

170.11 190.35 226.21 266.70 281.89 275.97 654.30 342.81 401.02 414.94 1216.47 1101.05 1083.33 671.31

211.90 237.11 281.78 332.22 351.14 343.76 815.03 427.02 499.53 516.87 1515.30 1371.53 1349.46 836.22

1.25 1.25 1.66 1.66 1.66 1.66 2.08 2.50 2.50 3.33 5.00 6.66 6.66 10.00

31.92 31.92 42.39 42.39 42.39 42.39 53.11 63.84 63.84 85.03 127.68 170.07 170.07 255.36

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

243.82 269.03 324.17 374.61 393.53 386.15 868.15 490.86 563.37 601.91 1642.98 1541.60 1519.53 1091.58

9.66

12.03

0.40

7.74

m2

19.77

12.64

15.75

0.65

12.58

m2

28.33

31.88

39.71

1.50

29.03

m2

68.74

23.26

28.97

1.25

24.19

m2

53.17

U10: THERMAL INSULATION Y50 – THERMAL INSULATION Concealed Ductwork Flexible wrap; 20kg–45kg Bright Class O aluminium foil faced; Bright Class O foil taped joints; 62mm metal pins and washers; aluminium bands 40mm thick insulation Semi-rigid slab; 45kg Bright Class O aluminium foil faced mineral fibre; Bright Class O foil taped joints; 62mm metal pins and washers; aluminium bands 40mm thick insulation Plantroom Ductwork Semi-rigid slab; 45kg Bright Class O aluminium foil faced mineral fibre; Bright Class O foil taped joints; 62mm metal pins and washers; 22 swg plain/embossed aluminium cladding; pop rivited 50mm thick insulation External Ductwork Semi-rigid slab; 45kg Bright Class O aluminium foil faced mineral fibre; Bright Class O foil taped joints; 62mm metal pins and washers; 0.8mm polyisobutylene sheeting; welded joints 50mm thick insulation

Material Costs/Prices for Measured Works – Mechanical Installations

457

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED Y30 – DUCTLINES The relevant BS requires that the fire rating of ductwork meets 3 criteria; stability (hours), integrity (hours) and insulation (hours). The least of the 3 periods defines the fire rating. The BS does however allow stability and integrity to be considered in isolation. Rates are therefore provided for both types of system. Care should to be taken when using the rates within this section to ensure that the requiremements for stability, integrity and insulation are known and the appropriate rates are used High density single layer mineral wool fire rated ductwork slab, in accordance with BS476, Part 24 (ISO 6944: 1985), ducts "Type A" and "Type B"; 165kg class O foil faced mineral fibre; 100mm wide bright class O foil taped joints; welded pins; includes protection to all supports. 1/2 hour stability, integrity and insulation 25mm thick, vertical and horizontal ductwork

34.70

43.22

1.25

24.19

m2

67.42

1 hour stability, integrity and insulation 30mm thick, vertical ductwork 40mm thick, horizontal ductwork

40.74 47.91

50.75 59.68

1.50 1.50

29.03 29.03

m2 m2

79.78 88.71

1½ hour stability, integrity and insulation 50mm thick, vertical ductwork 70mm thick, horizontal ductwork

57.24 71.60

71.30 89.19

1.75 1.75

33.87 33.87

m2 m2

105.17 123.06

2 hour stability, integrity and insulation 70mm, vertical ductwork 90mm horizontal ductwork

73.77 88.12

91.89 109.77

2.00 2.00

38.71 38.71

m2 m2

130.60 148.47

88.12

109.77

2.00

38.71

m2

148.47

Kitchen extract, 1 hour stability, integrity and insulation 90mm, vertical and horizontal Galvanised sheet metal rectangular section ductwork to BS476 Part 24 (ISO 6944:1985), ducts "Type A" and "Type B"; provides 2 hours stability and 2 hours integrity at 1100°C (no rating for insulation); including all necessary stiffeners, joints and supports in the running length

Material Costs/Prices for Measured Works – Mechanical Installations

458

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Ductwork up Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

to 600mm longest side sides 200mm sides 300mm sides 400mm sides 500mm sides 600mm sides 700mm sides 800mm sides 900mm sides 1000mm sides 1100mm sides 1200mm

59.72 64.84 69.94 75.06 80.16 85.28 90.40 95.50 100.62 105.72 110.83

120.32 130.63 140.91 151.22 161.50 171.81 182.12 192.40 202.71 212.99 223.29

2.91 2.99 3.17 3.37 3.54 3.72 3.90 5.04 5.58 5.84 6.11

74.31 76.35 80.95 86.06 90.40 94.99 99.59 128.70 142.49 149.13 156.03

m m m m m m m m m m m

194.63 206.98 221.86 237.28 251.90 266.80 281.71 321.10 345.20 362.12 379.32

Extra over fittings; Ductwork up to 600mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

16.96 17.98 19.02 20.05 21.07 22.11 23.17 24.19 25.22 26.26 27.28

34.16 36.23 38.32 40.39 42.46 44.55 46.67 48.74 50.81 52.90 54.97

0.81 0.84 0.87 0.90 0.93 0.96 0.98 1.17 1.22 1.25 1.28

20.68 21.45 22.22 22.98 23.75 24.51 25.03 29.88 31.15 31.92 32.69

nr nr nr nr nr nr nr nr nr nr nr

54.84 57.68 60.54 63.37 66.20 69.06 71.70 78.62 81.96 84.82 87.65

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

67.26 70.35 73.43 76.53 79.61 82.70 85.79 88.88 91.96 95.04 98.14

135.50 141.73 147.93 154.18 160.39 166.61 172.84 179.07 185.27 191.47 197.73

2.23 2.37 2.51 2.65 2.79 2.87 3.01 3.06 3.17 3.22 3.28

56.95 60.52 64.10 67.67 71.25 73.29 76.86 78.14 80.95 82.23 83.76

nr nr nr nr nr nr nr nr nr nr nr

192.44 202.25 212.02 221.85 231.63 239.90 249.71 257.21 266.22 273.70 281.49

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

162.32 166.35 170.37 174.41 178.43 182.47 186.49 190.53 194.55 198.57 202.62

327.03 335.13 343.24 351.37 359.47 367.61 375.71 383.84 391.95 400.05 408.21

2.95 3.11 3.26 3.42 3.57 3.73 3.23 3.45 3.67 3.78 3.89

75.33 79.42 83.25 87.33 91.16 95.25 82.48 88.10 93.72 96.53 99.33

nr nr nr nr nr nr nr nr nr nr nr

402.36 414.55 426.48 438.70 450.64 462.85 458.19 471.94 485.66 496.58 507.55

of of of of of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

459

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

65.81 70.81 75.78 80.78 85.77 90.73 95.73 100.70 105.70 110.67 115.65

132.59 142.65 152.66 162.75 172.79 182.80 192.86 202.87 212.96 222.97 233.00

2.06 2.21 2.36 2.51 2.66 2.81 2.97 2.99 3.04 3.07 3.09

52.60 56.43 60.27 64.10 67.93 71.76 75.84 76.35 77.63 78.40 78.91

nr nr nr nr nr nr nr nr nr nr nr

185.19 199.09 212.93 226.85 240.71 254.55 268.70 279.22 290.59 301.36 311.91

45° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

81.15 83.17 85.20 87.21 89.22 91.25 93.24 95.27 97.28 99.29 101.30

163.49 167.57 171.65 175.70 179.75 183.83 187.85 191.93 195.99 200.04 204.09

1.52 1.59 1.66 1.73 1.80 1.87 1.93 1.99 2.05 2.11 2.17

38.81 40.60 42.39 44.18 45.96 47.75 49.28 50.82 52.35 53.88 55.41

nr nr nr nr nr nr nr nr nr nr nr

202.30 208.17 214.03 219.87 225.71 231.58 237.14 242.75 248.34 253.92 259.51

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200mm 300mm 400mm 500mm 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

68.23 79.08 89.92 100.79 111.63 122.49 133.34 144.19 155.06 165.89 176.77

137.46 159.32 181.16 203.06 224.90 246.77 268.63 290.50 312.39 334.21 356.13

2.47 2.65 2.84 3.02 3.20 3.38 3.56 3.59 3.66 3.69 3.72

63.07 67.67 72.52 77.12 81.72 86.31 90.91 91.67 93.46 94.23 94.99

nr nr nr nr nr nr nr nr nr nr nr

200.53 227.00 253.69 280.18 306.61 333.08 359.54 382.17 405.86 428.43 451.12

Branch (Side-on Shoe) Sum of two sides 200mm Sum of two sides 300mm Sum of two sides 400mm Sum of two sides 500mm Sum of two sides 600mm Sum of two sides 700mm Sum of two sides 800mm Sum of two sides 900mm Sum of two sides 1000mm Sum of two sides 1100mm Sum of two sides 1200mm

25.33 25.47 25.61 25.76 25.88 26.03 26.15 26.35 26.42 26.57 26.70

51.02 51.32 51.59 51.89 52.14 52.44 52.68 53.09 53.23 53.53 53.80

0.98 1.06 1.14 1.22 1.30 1.38 1.46 1.37 1.46 1.50 1.55

25.03 27.07 29.11 31.15 33.20 35.24 37.28 34.98 37.28 38.30 39.58

nr nr nr nr nr nr nr nr nr nr nr

76.05 78.39 80.71 83.05 85.33 87.68 89.96 88.07 90.51 91.83 93.38

Material Costs/Prices for Measured Works – Mechanical Installations

460

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Ductwork 601 to 800mm longest side Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

95.49 100.60 105.72 110.83 115.97 121.08 126.21 131.33

192.37 202.68 212.99 223.29 233.63 243.94 254.27 264.58

5.04 5.58 5.84 6.11 6.38 6.65 6.91 7.18

128.70 142.49 149.13 156.03 162.92 169.81 176.45 183.35

m m m m m m m m

321.07 345.17 362.12 379.32 396.55 413.75 430.73 447.93

Extra over fittings; Ductwork 601 to 800mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

22.48 24.08 25.70 27.30 28.90 30.51 32.12 33.72

45.28 48.52 51.78 54.99 58.23 61.47 64.70 67.94

1.17 1.22 1.25 1.28 1.31 1.34 1.36 1.39

29.88 31.15 31.92 32.69 33.45 34.22 34.73 35.49

nr nr nr nr nr nr nr nr

75.16 79.67 83.70 87.68 91.68 95.69 99.43 103.44

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

84.12 88.80 93.47 98.16 102.84 107.53 112.20 116.88

169.47 178.91 188.32 197.75 207.19 216.63 226.04 235.48

3.06 3.17 3.22 3.28 3.33 3.38 3.44 3.49

78.14 80.95 82.23 83.76 85.03 86.31 87.84 89.12

nr nr nr nr nr nr nr nr

247.61 259.86 270.54 281.51 292.23 302.94 313.88 324.60

Offset Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

178.90 187.42 195.94 204.46 212.96 221.49 230.00 238.79

360.42 377.59 394.75 411.91 429.04 446.23 463.37 481.07

3.45 3.67 3.78 3.89 4.00 4.11 4.23 4.34

88.10 93.72 96.53 99.33 102.14 104.95 108.02 110.83

nr nr nr nr nr nr nr nr

448.52 471.30 491.27 511.25 531.19 551.19 571.39 591.90

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

89.45 98.24 107.00 115.79 124.56 133.34 142.13 150.92

180.21 197.92 215.57 233.28 250.95 268.63 286.34 304.04

2.99 3.04 3.07 3.09 3.12 3.15 3.17 3.20

76.35 77.63 78.40 78.91 79.67 80.44 80.95 81.72

nr nr nr nr nr nr nr nr

256.57 275.55 293.97 312.18 330.63 349.07 367.29 385.76

of of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

461

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

88.82 92.99 97.16 101.32 105.48 109.65 113.81 117.98

178.93 187.34 195.74 204.12 212.50 220.90 229.28 237.68

1.74 1.85 1.91 1.96 2.02 2.07 2.13 2.18

44.43 47.24 48.77 50.05 51.58 52.86 54.39 55.67

nr nr nr nr nr nr nr nr

223.37 234.58 244.52 254.17 264.08 273.76 283.67 293.35

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

900mm 1000mm 1100mm 1200mm 1300mm 1400mm 1500mm 1600mm

133.92 148.20 162.47 176.77 191.03 205.31 219.58 233.86

269.80 298.58 327.33 356.13 384.85 413.62 442.37 471.15

3.59 3.66 3.69 3.72 3.75 3.78 3.81 3.84

91.67 93.46 94.23 94.99 95.76 96.53 97.29 98.06

nr nr nr nr nr nr nr nr

361.48 392.04 421.55 451.12 480.61 510.15 539.66 569.21

Branch (Side-on Shoe) Sum of two sides 900mm Sum of two sides 1000mm Sum of two sides 1100mm Sum of two sides 1200mm Sum of two sides 1300mm Sum of two sides 1400mm Sum of two sides 1500mm Sum of two sides 1600mm

24.85 25.47 26.10 26.72 27.34 27.97 26.86 29.21

50.07 51.32 52.57 53.82 55.08 56.35 54.12 58.86

1.37 1.46 1.50 1.55 1.59 1.63 1.68 1.72

34.98 37.28 38.30 39.58 40.60 41.62 42.90 43.92

nr nr nr nr nr nr nr nr

85.06 88.60 90.88 93.41 95.68 97.98 97.02 102.78

105.72 110.83 115.95 121.07 126.18 131.30 136.43 141.55 146.66 151.78

212.99 223.29 233.60 243.91 254.22 264.53 274.86 285.17 295.48 305.78

5.84 6.11 6.38 6.65 6.91 7.18 7.45 7.71 7.98 8.25

149.13 156.03 162.92 169.81 176.45 183.35 190.24 196.88 203.78 210.67

m m m m m m m m m m

362.12 379.32 396.52 413.72 430.67 447.87 465.10 482.05 499.25 516.46

25.70 27.30 28.90 30.51 32.12 33.71 35.32 36.92 38.52 40.12

51.78 54.99 58.23 61.47 64.70 67.91 71.15 74.39 77.60 80.83

1.25 1.28 1.31 1.34 1.36 1.39 1.42 1.45 1.48 1.51

31.92 32.69 33.45 34.22 34.73 35.49 36.26 37.03 37.79 38.56

nr nr nr nr nr nr nr nr nr nr

83.70 87.68 91.68 95.69 99.43 103.41 107.41 111.41 115.39 119.39

Ductwork 801 to 1000mm longest side Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

Extra over fittings; Ductwork 801 to 1000mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

Material Costs/Prices for Measured Works – Mechanical Installations

462

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Extra over fittings; Ductwork 801 to 1000mm longest side – cont'd Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

93.47 98.17 102.88 107.59 112.28 117.02 121.70 126.41 131.13 138.17

188.32 197.78 207.27 216.77 226.20 235.75 245.19 254.68 264.17 278.37

3.22 3.28 3.33 3.38 3.44 3.49 3.54 3.60 3.65 3.70

82.23 83.76 85.03 86.31 87.84 89.12 90.40 91.93 93.21 94.48

nr nr nr nr nr nr nr nr nr nr

270.54 281.54 292.31 303.08 314.05 324.87 335.59 346.61 357.38 372.85

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

194.40 202.62 210.83 219.05 227.26 235.49 243.70 251.92 260.13 272.46

391.65 408.21 424.75 441.31 457.85 474.44 490.97 507.54 524.07 548.91

3.78 3.89 4.00 4.11 4.23 4.34 4.45 4.56 4.67 5.53

96.53 99.33 102.14 104.95 108.02 110.83 113.64 116.44 119.25 141.21

nr nr nr nr nr nr nr nr nr nr

488.17 507.55 526.89 546.26 565.86 585.26 604.61 623.98 643.33 690.12

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

106.84 115.64 124.44 133.25 142.05 150.84 159.64 168.44 177.24 185.77

215.24 232.98 250.71 268.44 286.18 303.88 321.61 339.35 357.08 374.27

3.07 3.09 3.12 3.15 3.17 3.20 3.22 3.25 3.28 3.30

78.40 78.91 79.67 80.44 80.95 81.72 82.23 82.99 83.76 84.27

nr nr nr nr nr nr nr nr nr nr

293.64 311.88 330.38 348.88 367.12 385.60 403.84 422.34 440.84 458.54

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

97.79 101.88 105.97 110.07 114.16 118.25 122.34 126.43 130.50 134.61

197.02 205.26 213.50 221.74 229.98 238.23 246.47 254.71 262.92 271.19

1.91 1.96 2.02 2.07 2.13 2.18 2.24 2.30 2.35 2.76

48.77 50.05 51.58 52.86 54.39 55.67 57.20 58.73 60.01 70.48

nr nr nr nr nr nr nr nr nr nr

245.79 255.31 265.09 274.60 284.38 293.89 303.67 313.44 322.93 341.67

of of of of of of of of of of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

463

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

Material £

Labour hours

Labour £

Unit

Total rate £

1100mm 1200mm 1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm

162.47 176.77 191.03 205.31 219.60 233.86 248.14 262.43 276.70 290.98

327.33 356.13 384.85 413.62 442.43 471.15 499.92 528.70 557.45 586.22

3.69 3.72 3.75 3.78 3.81 3.84 3.87 3.90 3.93 3.96

94.23 94.99 95.76 96.53 97.29 98.06 98.82 99.59 100.36 101.12

nr nr nr nr nr nr nr nr nr nr

421.55 451.12 480.61 510.15 539.72 569.21 598.75 628.29 657.80 687.34

Branch (Side-on Shoe) Sum of two sides 1100mm Sum of two sides 1200mm Sum of two sides 1300mm Sum of two sides 1400mm Sum of two sides 1500mm Sum of two sides 1600mm Sum of two sides 1700mm Sum of two sides 1800mm Sum of two sides 1900mm Sum of two sides 2000mm

26.07 26.68 27.32 27.96 28.59 29.21 29.85 30.48 31.12 32.05

52.52 53.74 55.05 56.33 57.60 58.86 60.13 61.41 62.69 64.57

1.50 1.55 1.59 1.63 1.68 1.72 1.77 1.81 1.86 1.90

38.30 39.58 40.60 41.62 42.90 43.92 45.20 46.22 47.50 48.52

nr nr nr nr nr nr nr nr nr nr

90.82 93.32 95.65 97.95 100.51 102.78 105.33 107.63 110.19 113.09

131.42 137.09 142.76 147.01 151.25 156.90 162.55 168.22 173.88 178.12 182.37 188.03 193.68

264.77 276.19 287.62 296.18 304.72 316.09 327.49 338.91 350.31 358.85 367.41 378.81 390.21

6.38 6.65 6.91 6.91 7.45 7.71 7.98 8.25 9.62 9.62 10.07 10.47 10.87

162.92 169.81 176.45 176.45 190.24 196.88 203.78 210.67 245.66 245.66 257.15 267.36 277.58

m m m m m m m m m m m m m

427.69 446.01 464.07 472.64 494.97 512.98 531.27 549.58 595.96 604.50 624.56 646.17 667.78

28.92 30.51 32.09 33.71 35.32 36.90 38.52 40.12 41.73 43.34 44.94 46.53 48.14

58.26 61.47 64.65 67.91 71.15 74.33 77.60 80.83 84.07 87.30 90.54 93.75 96.99

1.31 1.34 1.36 1.39 1.42 1.45 1.48 1.51 2.66 2.80 2.95 3.10 3.24

33.45 34.22 34.73 35.49 36.26 37.03 37.79 38.56 67.93 71.50 75.33 79.16 82.74

nr nr nr nr nr nr nr nr nr nr nr nr nr

91.71 95.69 99.38 103.41 107.41 111.36 115.39 119.39 151.99 158.81 165.87 172.91 179.72

Ductwork 1001 to 1250mm longest side Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

Extra over fittings; Ductwork 1001 to 1250mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

Material Costs/Prices for Measured Works – Mechanical Installations

464

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Extra over fittings; Ductwork 1001 to 1250mm longest side – cont'd Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

102.84 107.47 112.10 116.76 121.42 126.08 130.72 135.38 140.01 144.65 149.31 153.97 158.63

207.19 216.52 225.85 235.23 244.62 254.00 263.36 272.74 282.07 291.42 300.81 310.19 319.57

3.33 3.38 3.44 3.49 3.54 3.60 3.65 3.70 3.75 3.80 3.85 3.90 3.95

85.03 86.31 87.84 89.12 90.40 91.93 93.21 94.48 95.76 97.04 98.31 99.59 100.87

nr nr nr nr nr nr nr nr nr nr nr nr nr

292.23 302.83 313.69 324.35 335.01 345.93 356.56 367.22 377.83 388.46 399.12 409.78 420.44

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

210.13 218.47 226.80 235.13 243.46 251.79 260.12 268.45 276.78 284.97 293.44 301.75 310.10

423.33 440.14 456.92 473.70 490.48 507.27 524.05 540.83 557.61 574.12 591.17 607.92 624.73

4.00 4.11 4.23 4.34 4.45 4.56 4.67 5.53 5.76 5.99 6.22 6.45 6.68

102.14 104.95 108.02 110.83 113.64 116.44 119.25 141.21 147.09 152.96 158.83 164.71 170.58

nr nr nr nr nr nr nr nr nr nr nr nr nr

525.48 545.09 564.94 584.53 604.12 623.71 643.30 682.04 704.70 727.08 750.00 772.63 795.31

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

124.28 138.29 141.94 150.75 159.58 168.40 177.23 186.06 194.87 203.70 212.53 221.36 230.18

250.38 278.61 285.96 303.72 321.50 339.26 357.05 374.84 392.60 410.39 428.17 445.96 463.72

3.12 3.15 3.17 3.20 3.22 3.25 3.28 3.30 3.32 3.34 3.36 3.38 3.40

79.67 80.44 80.95 81.72 82.23 82.99 83.76 84.27 84.78 85.29 85.80 86.31 86.82

nr nr nr nr nr nr nr nr nr nr nr nr nr

330.06 359.05 366.91 385.43 403.73 422.26 440.81 459.11 477.38 495.68 513.98 532.27 550.54

of of of of of of of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

465

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides sides sides sides sides sides sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

100.67 105.19 109.73 114.26 118.79 123.32 127.84 132.39 136.93 141.47 145.99 150.53 155.06

202.81 211.93 221.06 230.20 239.31 248.45 257.56 266.73 275.87 285.01 294.12 303.26 312.39

2.02 2.07 2.13 2.18 2.24 2.30 2.35 2.76 2.89 3.01 3.13 3.26 3.37

51.58 52.86 54.39 55.67 57.20 58.73 60.01 70.48 73.80 76.86 79.93 83.25 86.06

nr nr nr nr nr nr nr nr nr nr nr nr nr

254.40 264.78 275.46 285.87 296.51 307.18 317.57 337.21 349.67 361.87 374.04 386.50 398.45

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1400mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

190.59 204.74 219.44 233.85 248.25 262.64 277.06 291.48 305.88 320.30 334.71 349.10 363.50

383.98 412.48 442.10 471.12 500.14 529.13 558.18 587.23 616.25 645.29 674.31 703.31 732.33

3.75 3.78 3.81 3.84 3.87 3.90 3.93 3.96 3.99 4.02 4.05 4.08 4.11

95.76 96.53 97.29 98.06 98.82 99.59 100.36 101.12 101.89 102.65 103.42 104.19 104.95

nr nr nr nr nr nr nr nr nr nr nr nr nr

479.74 509.01 539.39 569.18 598.96 628.72 658.54 688.35 718.14 747.95 777.74 807.49 837.28

Branch (Side-on Shoe) Sum of two sides 1300mm Sum of two sides 1400mm Sum of two sides 1500mm Sum of two sides 1600mm Sum of two sides 1700mm Sum of two sides 1800mm Sum of two sides 1900mm Sum of two sides 2000mm Sum of two sides 2100mm Sum of two sides 2200mm Sum of two sides 2300mm Sum of two sides 2400mm Sum of two sides 2500mm

27.38 28.00 28.62 29.24 29.88 30.51 31.13 31.77 32.39 33.01 33.64 34.28 34.90

55.16 56.41 57.66 58.91 60.19 61.47 62.72 64.00 65.25 66.50 67.78 69.06 70.31

1.59 1.63 1.68 1.72 1.77 1.81 1.86 1.90 2.58 2.61 2.64 2.88 2.91

40.60 41.62 42.90 43.92 45.20 46.22 47.50 48.52 65.88 66.65 67.42 73.54 74.31

nr nr nr nr nr nr nr nr nr nr nr nr nr

95.76 98.03 100.56 102.83 105.39 107.69 110.22 112.51 131.13 133.15 135.19 142.60 144.62

144.11 153.36 162.59 171.83 181.06 190.30 199.52 208.75 217.98 227.23 236.45 245.70

290.34 308.97 327.57 346.17 364.78 383.38 401.96 420.56 439.16 457.79 476.37 495.00

7.45 7.71 7.98 8.25 9.62 9.66 10.07 10.47 10.87 11.27 11.67 12.08

190.24 196.88 203.78 210.67 245.66 246.68 257.15 267.36 277.58 287.79 298.01 308.47

m m m m m m m m m m m m

480.58 505.85 531.35 556.85 610.43 630.06 659.10 687.92 716.74 745.58 774.37 803.47

Ductwork 1251 to 2000mm longest side Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of

two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm

Material Costs/Prices for Measured Works – Mechanical Installations

466

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Ductwork 1251 to 2000mm longest side – cont'd Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of

two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides

2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

254.92 264.15 273.39 282.62 291.87 301.09 310.32 319.55 328.79 338.01 347.26 356.48

513.58 532.18 550.78 569.39 588.02 606.59 625.20 643.77 662.40 680.98 699.61 718.18

12.48 12.88 13.26 13.69 14.09 14.49 14.89 15.29 15.69 16.09 16.49 16.89

318.69 328.90 338.61 349.59 359.80 370.02 380.23 390.45 400.66 410.87 421.09 431.30

m m m m m m m m m m m m

832.26 861.08 889.39 918.97 947.82 976.61 1005.43 1034.22 1063.06 1091.85 1120.70 1149.49

Extra over fittings; Ductwork 1251 to 2000mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

52.46 55.84 59.21 62.59 65.96 69.34 72.70 76.07 79.45 82.82 86.18 89.56 92.96 96.32 99.70 103.07 106.43 109.81 112.59 114.86 118.23 113.71 126.67 130.05

105.69 112.49 119.29 126.09 132.89 139.69 146.46 153.26 160.06 166.86 173.63 180.43 187.28 194.06 200.86 207.66 214.43 221.23 226.83 231.40 238.20 229.09 255.20 262.00

1.42 1.45 1.48 1.51 2.66 2.80 2.95 3.10 3.24 3.39 3.54 3.68 3.83 3.98 4.12 4.27 4.42 4.57 4.72 4.87 5.02 5.17 5.32 5.47

36.26 37.03 37.79 38.56 67.93 71.50 75.33 79.16 82.74 86.57 90.40 93.97 97.80 101.63 105.21 109.04 112.87 116.70 120.53 124.36 128.19 132.02 135.85 139.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

141.95 149.52 157.08 164.65 200.81 211.19 221.79 232.42 242.80 253.43 264.03 274.40 285.09 295.69 306.06 316.69 327.30 337.93 347.36 355.76 366.39 361.11 391.05 401.68

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two

sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm

113.29 127.09 140.87 154.68 168.47 182.26 196.06 209.86 223.64

228.24 256.04 283.81 311.63 339.40 367.20 394.99 422.79 450.56

3.54 3.60 3.65 3.70 2.92 3.10 3.29 3.48 3.66

90.40 91.93 93.21 94.48 74.57 79.16 84.01 88.87 93.46

nr nr nr nr nr nr nr nr nr

318.64 347.97 377.02 406.12 413.97 446.36 479.01 511.65 544.02

Material Costs/Prices for Measured Works – Mechanical Installations

467

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of of of of

two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

237.45 251.24 265.03 278.83 299.50 299.50 313.31 333.99 347.79 361.58 375.37 389.18 402.96 416.76 430.56

478.38 506.15 533.95 561.74 603.38 603.38 631.21 672.87 700.67 728.47 756.23 784.06 811.83 839.62 867.42

3.85 4.03 4.22 4.40 4.59 4.78 4.96 5.15 5.34 5.53 5.72 5.91 6.10 6.29 6.48

98.31 102.91 107.76 112.36 117.21 122.06 126.66 131.51 136.36 141.21 146.07 150.92 155.77 160.62 165.47

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

576.70 609.06 641.71 674.10 720.59 725.44 757.86 804.38 837.03 869.68 902.30 934.98 967.60 1000.24 1032.89

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of of of of of of of of of of of of of

two two two two two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

113.29 122.63 131.98 141.28 150.62 159.96 169.30 178.62 187.96 197.30 206.64 215.99 225.30 234.64 243.99 253.33 262.64 271.97 281.31 290.65 299.98 309.31 318.65 328.00

228.24 247.06 265.89 284.62 303.45 322.27 341.09 359.85 378.67 397.50 416.32 435.14 453.90 472.72 491.55 510.37 529.13 547.93 566.75 585.57 604.36 623.16 641.98 660.80

4.45 4.56 4.67 5.53 5.76 5.99 6.22 6.45 6.68 6.91 7.14 7.37 7.60 7.83 8.06 8.29 8.52 8.75 8.98 9.21 9.44 9.67 9.90 10.13

113.64 116.44 119.25 141.21 147.09 152.96 158.83 164.71 170.58 176.45 182.33 188.20 194.07 199.95 205.82 211.69 217.57 223.44 229.31 235.19 241.06 246.93 252.81 258.68

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

341.88 363.51 385.14 425.84 450.53 475.23 499.92 524.56 549.26 573.95 598.64 623.34 647.98 672.67 697.37 722.06 746.70 771.37 796.06 820.75 845.42 870.09 894.78 919.48

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm

157.67 171.91 186.16 200.42 214.66 228.91 243.16 257.39 271.66 285.92 300.17 314.42 328.64 342.90 357.14 371.40

317.64 346.34 375.06 403.78 432.47 461.17 489.89 518.55 547.30 576.02 604.74 633.44 662.10 690.82 719.52 748.24

3.22 3.25 3.28 3.30 3.32 3.34 3.36 3.38 3.40 3.42 3.44 3.46 3.48 3.50 3.52 3.54

82.23 82.99 83.76 84.27 84.78 85.29 85.80 86.31 86.82 87.33 87.84 88.35 88.87 89.38 89.89 90.40

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

399.87 429.33 458.82 488.05 517.25 546.46 575.69 604.86 634.12 663.35 692.59 721.79 750.97 780.20 809.40 838.64

Material Costs/Prices for Measured Works – Mechanical Installations

468

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Extra over fittings; Ductwork 1251 to 2000mm longest side – cont'd 90° radius bend - cont'd Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of

two two two two two two two two

sides sides sides sides sides sides sides sides

3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

347.08 360.05 372.74 385.56 398.37 411.20 424.04 436.85

699.24 725.38 750.94 776.76 802.58 828.43 854.28 880.11

3.56 3.58 3.60 3.62 3.64 3.66 3.68 3.70

90.91 91.42 91.93 92.44 92.95 93.46 93.97 94.48

nr nr nr nr nr nr nr nr

790.15 816.80 842.87 869.20 895.54 921.90 948.25 974.59

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm 3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

116.88 129.80 142.69 155.63 214.66 181.44 194.37 207.27 220.19 233.08 246.01 258.92 271.82 284.73 297.66 310.55 323.47 336.38 349.30 362.22 375.11 388.03 400.92 413.86

235.48 261.51 287.48 313.54 432.47 365.54 391.59 417.57 443.60 469.57 495.63 521.63 547.63 573.63 599.68 625.66 651.69 677.69 703.72 729.74 755.72 781.75 807.72 833.77

2.24 2.30 2.35 2.76 2.89 3.01 3.13 3.26 3.37 3.49 3.62 3.74 3.86 3.98 4.10 4.22 4.34 4.46 4.58 4.70 4.82 4.94 5.06 5.18

57.20 58.73 60.01 70.48 73.80 76.86 79.93 83.25 86.06 89.12 92.44 95.50 98.57 101.63 104.70 107.76 110.83 113.89 116.95 120.02 123.08 126.15 129.21 132.28

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

292.68 320.24 347.49 384.02 506.27 442.40 471.52 500.81 529.65 558.69 588.07 617.13 646.20 675.26 704.38 733.42 762.51 791.58 820.67 849.76 878.80 907.89 936.93 966.05

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1700mm 1800mm 1900mm 2000mm 2100mm 2200mm 2300mm 2400mm 2500mm 2600mm 2700mm 2800mm 2900mm 3000mm

236.14 276.95 317.78 358.56 399.38 440.19 481.00 521.82 562.63 603.41 644.23 685.04 725.85 766.66

475.74 557.96 640.21 722.37 804.62 886.84 969.06 1051.28 1133.49 1215.66 1297.90 1380.12 1462.34 1544.56

3.87 3.90 3.93 3.96 3.82 3.83 3.83 3.84 3.85 3.85 3.86 3.86 3.87 3.87

98.82 99.59 100.36 101.12 97.55 97.80 97.80 98.06 98.31 98.31 98.57 98.57 98.82 98.82

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

574.57 657.55 740.56 823.50 902.17 984.64 1066.86 1149.33 1231.81 1313.97 1396.47 1478.69 1561.17 1643.39

Material Costs/Prices for Measured Works – Mechanical Installations

469

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

Net Price £

of of of of of of of of of of

two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides

Material £

Labour hours

Labour £

Unit

Total rate £

3100mm 3200mm 3300mm 3400mm 3500mm 3600mm 3700mm 3800mm 3900mm 4000mm

807.48 848.27 889.10 929.91 970.72 1011.53 1052.34 1093.14 1133.96 1174.77

1626.78 1708.97 1791.22 1873.44 1955.66 2037.87 2120.09 2202.29 2284.53 2366.75

3.88 3.88 3.89 3.90 3.91 3.92 3.93 3.94 3.95 3.96

99.08 99.08 99.33 99.59 99.85 100.10 100.36 100.61 100.87 101.12

nr nr nr nr nr nr nr nr nr nr

1725.86 1808.05 1890.55 1973.03 2055.50 2137.98 2220.45 2302.90 2385.40 2467.87

Branch (Side-on Shoe) Sum of two sides 1700mm Sum of two sides 1800mm Sum of two sides 1900mm Sum of two sides 2000mm Sum of two sides 2100mm Sum of two sides 2200mm Sum of two sides 2300mm Sum of two sides 2400mm Sum of two sides 2500mm Sum of two sides 2600mm Sum of two sides 2700mm Sum of two sides 2800mm Sum of two sides 2900mm Sum of two sides 3000mm Sum of two sides 3100mm Sum of two sides 3200mm Sum of two sides 3300mm Sum of two sides 3400mm Sum of two sides 3500mm Sum of two sides 3600mm Sum of two sides 3700mm Sum of two sides 3800mm Sum of two sides 3900mm Sum of two sides 4000mm

26.77 29.25 31.75 34.25 36.73 39.22 41.72 44.20 46.70 49.19 51.66 54.16 56.66 59.14 61.63 64.13 66.61 69.11 71.60 74.07 76.57 79.07 81.57 84.04

53.93 58.94 63.97 69.00 74.01 79.01 84.04 89.05 94.08 99.11 104.09 109.12 114.15 119.15 124.16 129.19 134.19 139.23 144.26 149.23 154.27 159.30 164.33 169.31

1.77 1.81 1.86 1.90 2.58 2.61 2.65 2.68 2.71 2.75 2.78 2.81 2.84 2.87 2.90 2.93 2.93 3.00 3.03 3.06 3.09 3.12 3.15 3.18

45.20 46.22 47.50 48.52 65.88 66.65 67.67 68.44 69.20 70.22 70.99 71.76 72.52 73.29 74.05 74.82 74.82 76.61 77.37 78.14 78.91 79.67 80.44 81.20

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

99.13 105.16 111.47 117.52 139.89 145.66 151.71 157.48 163.28 169.33 175.08 180.87 186.67 192.44 198.21 204.01 209.01 215.83 221.63 227.37 233.17 238.97 244.77 250.51

198.47 198.47 198.47 280.36 280.36 390.40

399.85 399.85 399.85 564.83 564.83 786.52

4.00 4.00 4.00 5.50 5.50 6.00

102.14 102.14 102.14 140.45 140.45 153.22

m m m m m m

501.99 501.99 501.99 705.28 705.28 939.74

Rectangular section ductwork to BS476 Part 24 (ISO 6944:1985) (Duraduct LT), ducts "Type A" and "Type B"; manufactured from 6mm thick laminate fire board consisting of steel circular hole punched facings pressed to a fibre cement core; provides up to 4 hours stability, 4 hours integrity and 32 minutes insulation; including all necessary stiffeners, joints and supports in the running length Ductwork up Sum of two Sum of two Sum of two Sum of two Sum of two Sum of two

to 600mm longest side sides 200mm sides 400mm sides 600mm sides 800mm sides 1000mm sides 1200mm

Material Costs/Prices for Measured Works – Mechanical Installations

470

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Extra over fittings; Ductwork up to 600mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two

sides sides sides sides sides sides

200 mm 400mm 600mm 800mm 1000mm 1200mm

47.10 47.10 47.10 76.08 76.08 115.92

94.89 94.89 94.89 153.27 153.27 233.54

0.81 0.87 0.93 0.98 1.22 1.28

20.68 22.22 23.75 25.03 31.15 32.69

m m m m m m

115.57 117.11 118.64 178.30 184.43 266.22

Reducer Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two

sides sides sides sides sides sides

200 mm 400mm 600mm 800mm 1000mm 1200mm

41.65 41.65 41.65 81.51 81.51 103.25

83.91 83.91 83.91 164.21 164.21 208.01

2.23 2.51 2.79 3.01 3.17 3.28

56.95 64.10 71.25 76.86 80.95 83.76

m m m m m m

140.86 148.01 155.16 241.08 245.16 291.77

Offset Sum Sum Sum Sum Sum Sum

two two two two two two

sides sides sides sides sides sides

200 mm 400mm 600mm 800mm 1000mm 1200mm

41.65 41.65 41.65 81.51 81.51 103.25

83.91 83.91 83.91 164.21 164.21 208.01

2.95 3.26 3.57 3.23 3.67 3.89

75.33 83.25 91.16 82.48 93.72 99.33

m m m m m m

159.24 167.16 175.07 246.70 257.93 307.35

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200 mm 400mm 600mm 800mm 1000mm 1200mm

139.47 139.47 139.47 163.02 163.02 184.76

280.98 280.98 280.98 328.43 328.43 372.23

2.06 2.36 2.66 2.97 3.04 3.09

52.60 60.27 67.93 75.84 77.63 78.91

m m m m m m

333.59 341.25 348.91 404.27 406.06 451.13

45° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200 mm 400mm 600mm 800mm 1000mm 1200mm

139.47 139.47 139.47 163.02 163.02 184.76

280.98 280.98 280.98 328.43 328.43 372.23

1.52 1.66 1.80 1.93 2.05 2.17

38.81 42.39 45.96 49.28 52.35 55.41

m m m m m m

319.80 323.37 326.95 377.71 380.78 427.64

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

200 mm 400mm 600mm 800mm 1000mm 1200mm

139.47 139.47 139.47 163.02 163.02 184.76

280.98 280.98 280.98 328.43 328.43 372.23

2.47 2.84 3.20 3.56 3.66 3.72

63.07 72.52 81.72 90.91 93.46 94.99

m m m m m m

344.06 353.51 362.70 419.34 421.89 467.22

of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

471

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Branch Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two

sides sides sides sides sides sides

200 mm 400mm 600mm 800mm 1000mm 1200mm

Ductwork 601 to 1000mm longest side Sum of two sides 1000mm Sum of two sides 1100mm Sum of two sides 1300mm Sum of two sides 1500mm Sum of two sides 1700mm Sum of two sides 1900mm

Material £

Labour hours

Labour £

Unit

Total rate £

50.72 50.72 50.72 63.39 63.39 85.12

102.18 102.18 102.18 127.71 127.71 171.49

0.98 1.14 1.30 1.46 1.46 1.55

25.03 29.11 33.20 37.28 37.28 39.58

m m m m m m

127.21 131.29 135.38 164.99 164.99 211.07

280.36 390.40 390.40 390.40 490.89 490.89

564.83 786.52 786.52 786.52 988.97 988.97

6.00 6.00 6.00 6.00 6.00 6.00

153.22 153.22 153.22 153.22 153.22 153.22

m m m m m m

718.04 939.74 939.74 939.74 1142.19 1142.19

Extra over fittings; Dutcwork 601 to 1000mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two

sides sides sides sides sides sides

1000mm 1100mm 1300mm 1500mm 1700mm 1900mm

76.08 115.92 115.92 115.92 204.68 204.68

153.27 233.54 233.54 233.54 412.36 412.36

1.25 1.25 1.31 1.36 1.42 1.48

31.92 31.92 33.45 34.73 36.26 37.79

m m m m m m

185.19 265.46 266.99 268.27 448.62 450.15

Reducer Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two

sides sides sides sides sides sides

1000mm 1100mm 1300mm 1500mm 1700mm 1900mm

81.51 103.25 103.25 103.25 126.80 126.80

164.21 208.01 208.01 208.01 255.46 255.46

3.22 3.22 3.33 3.44 3.54 3.65

82.23 82.23 85.03 87.84 90.40 93.21

m m m m m m

246.44 290.24 293.05 295.86 345.86 348.66

Offset Sum Sum Sum Sum Sum Sum

two two two two two two

sides sides sides sides sides sides

1000mm 1100mm 1300mm 1500mm 1700mm 1900mm

81.51 103.25 103.25 103.25 126.80 126.80

164.21 208.01 208.01 208.01 255.46 255.46

3.78 3.78 4.00 4.23 4.45 4.67

96.53 96.53 102.14 108.02 113.64 119.25

m m m m m m

260.74 304.54 310.16 316.03 369.09 374.71

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1000mm 1100mm 1300mm 1500mm 1700mm 1900mm

163.02 184.76 184.76 184.76 242.72 242.72

328.43 372.23 372.23 372.23 489.00 489.00

3.78 3.07 3.12 3.17 3.22 3.28

96.53 78.40 79.67 80.95 82.23 83.76

m m m m m m

424.95 450.62 451.90 453.18 571.22 572.75

45° bend Sum of Sum of Sum of Sum of Sum of Sum of

1000mm 1100mm 1300mm 1500mm 1700mm 1900mm

163.02 184.76 184.76 184.76 242.72 242.72

328.43 372.23 372.23 372.23 489.00 489.00

3.78 1.91 2.02 2.13 2.24 2.35

96.53 48.77 51.58 54.39 57.20 60.01

m m m m m m

424.95 421.00 423.81 426.62 546.20 549.01

of of of of of of

two two two two two two

sides sides sides sides sides sides

Material Costs/Prices for Measured Works – Mechanical Installations

472

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Extra over fittings; Dutcwork 601 to 1000mm longest side – cont'd 90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1000mm 1100mm 1300mm 1500mm 1700mm 1900mm

163.02 184.76 184.76 184.76 242.72 242.72

328.43 372.23 372.23 372.23 489.00 489.00

3.78 3.69 3.75 3.81 3.87 3.93

96.53 94.23 95.76 97.29 98.82 100.36

m m m m m m

424.95 466.45 467.99 469.52 587.82 589.35

Branch Sum of Sum of Sum of Sum of Sum of Sum of

1000mm 1100mm 1300mm 1500mm 1700mm 1900mm

63.39 85.12 85.12 85.12 108.68 108.68

127.71 171.49 171.49 171.49 218.95 218.95

3.78 1.50 1.59 1.68 1.77 1.86

96.53 38.30 40.60 42.90 45.20 47.50

m m m m m m

224.23 209.79 212.09 214.39 264.15 266.45

390.40 390.40 490.89 490.89 654.00 654.00 654.00

786.52 786.52 988.97 988.97 1317.58 1317.58 1317.58

6.00 6.00 6.00 6.00 6.50 6.50 6.50

153.22 153.22 153.22 153.22 165.98 165.98 165.98

m m m m m m m

939.74 939.74 1142.19 1142.19 1483.57 1483.57 1483.57

two two two two two two

sides sides sides sides sides sides

Ductwork 1001 to 1250mm longest side Sum Sum Sum Sum Sum Sum Sum

of of of of of of of

two two two two two two two

sides sides sides sides sides sides sides

1300mm 1500mm 1700mm 1900mm 2100mm 2300mm 2500mm

Extra over fittings; Ductwork 1001 to 1250mm longest side End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

1300mm 1500mm 1700mm 1900mm 2100mm 2300mm 2500mm

115.92 115.92 204.68 204.68 278.94 278.94 278.94

233.54 233.54 412.36 412.36 561.97 561.97 561.97

1.31 1.36 1.42 1.48 2.66 2.95 3.24

33.45 34.73 36.26 37.79 67.93 75.33 82.74

m m m m m m m

266.99 268.27 448.62 450.15 629.89 637.30 644.70

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two

sides sides sides sides sides sides sides

1300mm 1500mm 1700mm 1900mm 2100mm 2300mm 2500mm

103.25 103.25 126.80 126.80 150.33 150.33 150.33

208.01 208.01 255.46 255.46 302.86 302.86 302.86

3.33 3.44 3.54 3.65 3.75 3.85 3.95

85.03 87.84 90.40 93.21 95.76 98.31 100.87

m m m m m m m

293.05 295.86 345.86 348.66 398.62 401.18 403.73

Material Costs/Prices for Measured Works – Mechanical Installations

473

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Offset Sum Sum Sum Sum Sum Sum Sum

Net Price £

of of of of of of of

two two two two two two two

Material £

Labour hours

Labour £

Unit

Total rate £

sides sides sides sides sides sides sides

1300mm 1500mm 1700mm 1900mm 2100mm 2300mm 2500mm

103.25 103.25 126.80 126.80 150.33 150.33 150.33

208.01 208.01 255.46 255.46 302.86 302.86 302.86

4.00 4.23 4.45 4.67 5.76 6.22 6.68

102.14 108.02 113.64 119.25 147.09 158.83 170.58

m m m m m m m

310.16 316.03 369.09 374.71 449.95 461.70 473.44

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1500mm 1700mm 1900mm 2100mm 2300mm 2500mm

184.76 184.76 242.72 242.72 248.15 248.15 248.15

372.23 372.23 489.00 489.00 499.94 499.94 499.94

3.12 3.17 3.22 3.28 3.32 3.36 3.40

79.67 80.95 82.23 83.76 84.78 85.80 86.82

m m m m m m m

451.90 453.18 571.22 572.75 584.71 585.74 586.76

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of

sides sides sides sides sides sides sides

1300mm 1500mm 1700mm 1900mm 2100mm 2300mm 2500mm

184.76 184.76 242.72 242.72 248.15 248.15 248.15

372.23 372.23 489.00 489.00 499.94 499.94 499.94

2.02 2.13 2.24 2.35 2.89 3.13 3.37

51.58 54.39 57.20 60.01 73.80 79.93 86.06

m m m m m m m

423.81 426.62 546.20 549.01 573.73 579.86 585.99

90° mitre bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1300mm 1500mm 1700mm 1900mm 2100mm 2300mm 2500mm

184.76 184.76 242.72 242.72 248.15 248.15 248.15

372.23 372.23 489.00 489.00 499.94 499.94 499.94

3.75 3.81 3.87 3.93 3.99 4.05 4.11

95.76 97.29 98.82 100.36 101.89 103.42 104.95

m m m m m m m

467.99 469.52 587.82 589.35 601.82 603.36 604.89

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1300mm 1500mm 1700mm 1900mm 2100mm 2300mm 2500mm

85.12 85.12 108.68 108.68 114.10 114.10 114.10

171.49 171.49 218.95 218.95 229.87 229.87 229.87

1.59 1.68 1.77 1.86 2.58 2.64 2.91

40.60 42.90 45.20 47.50 65.88 67.42 74.31

m m m m m m m

212.09 214.39 264.15 266.45 295.75 297.29 304.18

490.89 490.89 654.00 654.00 774.82 774.82 774.82 931.43 931.43 1043.07 1043.07 1043.07

988.97 988.97 1317.58 1317.58 1560.99 1560.99 1560.99 1876.51 1876.51 2101.42 2101.42 2101.42

6.00 6.00 6.50 6.50 6.66 6.66 6.66 9.00 9.00 11.70 11.70 11.70

153.22 153.22 165.98 165.98 170.07 170.07 170.07 229.82 229.82 298.77 298.77 298.77

m m m m m m m m m m m m

1142.19 1142.19 1483.57 1483.57 1731.06 1731.06 1731.06 2106.33 2106.33 2400.19 2400.19 2400.19

two two two two two two two

two two two two two two two

sides sides sides sides sides sides sides

Ductwork 1251 to 2000mm longest side Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

of of of of of of of of of of of of

two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides

1800mm 2000mm 2200mm 2400mm 2600mm 2800mm 3000mm 3200mm 3400mm 3600mm 3800mm 4000mm

Material Costs/Prices for Measured Works – Mechanical Installations

474

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U14: DUCTWORK: FIRE RATED – cont'd DUCTLINES – cont'd Extra over fittings; Ductwork 1251 to 2000mm longest sides End Cap Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides

1800mm 2000mm 2200mm 2400mm 2600mm 2800mm 3000mm 3200mm 3400mm 3600mm 3800mm 4000mm

204.68 204.68 278.94 278.94 382.17 382.17 382.17 516.21 516.21 635.74 635.74 635.74

412.36 412.36 561.97 561.97 769.94 769.94 769.94 1039.98 1039.98 1280.79 1280.79 1280.79

1.45 1.51 2.80 3.10 3.39 3.68 3.98 4.27 4.57 4.87 5.17 5.47

37.03 38.56 71.50 79.16 86.57 93.97 101.63 109.04 116.70 124.36 132.02 139.68

m m m m m m m m m m m m

449.39 450.92 633.47 641.13 856.51 863.91 871.57 1149.02 1156.68 1405.15 1412.81 1420.48

Reducer Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides

1800mm 2000mm 2200mm 2400mm 2600mm 2800mm 3000mm 3200mm 3400mm 3600mm 3800mm 4000mm

126.80 126.80 150.33 150.33 208.29 208.29 208.29 231.84 231.84 253.58 253.58 253.58

255.46 255.46 302.86 302.86 419.63 419.63 419.63 467.08 467.08 510.87 510.87 510.87

3.60 3.70 3.10 3.48 3.85 4.22 4.59 4.96 5.34 5.72 6.10 6.48

91.93 94.48 79.16 88.87 98.31 107.76 117.21 126.66 136.36 146.07 155.77 165.47

m m m m m m m m m m m m

347.39 349.94 382.02 391.73 517.94 527.39 536.84 593.74 603.44 656.94 666.64 676.35

Offset Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum Sum

two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides

1800mm 2000mm 2200mm 2400mm 2600mm 2800mm 3000mm 3200mm 3400mm 3600mm 3800mm 4000mm

126.80 126.80 150.33 150.33 208.29 208.29 208.29 231.84 231.84 253.58 253.58 253.58

255.46 255.46 302.86 302.86 419.63 419.63 419.63 467.08 467.08 510.87 510.87 510.87

4.56 5.53 5.99 6.45 6.91 7.37 7.83 8.29 8.75 9.21 9.67 10.13

116.44 141.21 152.96 164.71 176.45 188.20 199.95 211.69 223.44 235.19 246.93 258.68

m m m m m m m m m m m m

371.90 396.67 455.82 467.57 596.09 607.83 619.58 678.77 690.52 746.06 757.81 769.55

of of of of of of of of of of of of

Material Costs/Prices for Measured Works – Mechanical Installations

475

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

90° radius bend Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1800mm 2000mm 2200mm 2400mm 2600mm 2800mm 3000mm 3200mm 3400mm 3600mm 3800mm 4000mm

242.72 242.72 248.15 248.15 380.37 380.37 380.37 456.44 456.44 534.31 534.31 534.31

489.00 489.00 499.94 499.94 766.31 766.31 766.31 919.57 919.57 1076.45 1076.45 1076.45

3.25 3.30 3.34 3.38 3.42 3.46 3.50 3.54 3.58 3.62 3.66 3.70

82.99 84.27 85.29 86.31 87.33 88.35 89.38 90.40 91.42 92.44 93.46 94.48

m m m m m m m m m m m m

571.99 573.26 585.23 586.25 853.65 854.67 855.69 1009.96 1010.99 1168.89 1169.91 1170.93

45° bend Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

sides sides sides sides sides sides sides sides sides sides sides sides

1800mm 2000mm 2200mm 2400mm 2600mm 2800mm 3000mm 3200mm 3400mm 3600mm 3800mm 4000mm

242.72 242.72 248.15 248.15 380.37 380.37 380.37 456.44 456.44 534.31 534.31 534.31

489.00 489.00 499.94 499.94 766.31 766.31 766.31 919.57 919.57 1076.45 1076.45 1076.45

2.30 2.76 3.01 3.26 3.49 3.74 3.98 4.22 4.46 4.70 4.94 5.18

58.73 70.48 76.86 83.25 89.12 95.50 101.63 107.76 113.89 120.02 126.15 132.28

m m m m m m m m m m m m

547.73 559.48 576.80 583.18 855.43 861.82 867.95 1027.33 1033.46 1196.47 1202.60 1208.72

90° mitre band Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides Sum of two sides

1800mm 2000mm 2200mm 2400mm 2600mm 2800mm 3000mm 3200mm 3400mm 3600mm 3800mm 4000mm

242.72 242.72 248.15 248.15 380.37 380.37 380.37 456.44 456.44 534.31 534.31 534.31

489.00 489.00 499.94 499.94 766.31 766.31 766.31 919.57 919.57 1076.45 1076.45 1076.45

3.90 3.96 3.83 3.84 3.85 3.86 3.87 3.88 3.90 3.92 3.94 3.96

99.59 101.12 97.80 98.06 98.31 98.57 98.82 99.08 99.59 100.10 100.61 101.12

m m m m m m m m m m m m

588.59 590.12 597.74 597.99 864.63 864.88 865.14 1018.65 1019.16 1176.55 1177.06 1177.57

Branch Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of Sum of

1800mm 2000mm 2200mm 2400mm 2600mm 2800mm 3000mm 3200mm 3400mm 3600mm 3800mm 4000mm

108.68 108.68 114.10 114.10 135.84 135.84 135.84 141.29 141.29 181.13 181.13 181.13

218.95 218.95 229.87 229.87 273.67 273.67 273.67 284.65 284.65 364.91 364.91 364.91

1.81 1.90 2.61 2.68 2.75 2.81 2.87 2.93 3.00 3.06 3.12 3.18

46.22 48.52 66.65 68.44 70.22 71.76 73.29 74.82 76.61 78.14 79.67 81.20

m m m m m m m m m m m m

265.17 267.47 296.52 298.31 343.89 345.43 346.96 359.47 361.26 443.05 444.59 446.12

two two two two two two two two two two two two

two two two two two two two two two two two two

sides sides sides sides sides sides sides sides sides sides sides sides

476

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4831.99 5162.29 8147.72 8432.74 12203.54 12393.77 13438.45 13714.32 16793.33 17312.00 18824.61 19167.13 21361.10 21753.78 24753.88 25109.87

6019.00 6430.44 10149.26 10504.30 15201.42 15438.38 16739.69 17083.33 20918.72 21564.80 23448.99 23875.66 26608.59 27097.73 30834.83 31278.27

40.00 40.00 65.00 65.00 77.00 77.00 100.00 100.00 108.00 108.00 120.00 120.00 133.00 133.00 142.00 142.00

985.54 985.54 1601.50 1601.50 1897.16 1897.16 2463.84 2463.84 2660.95 2660.95 2956.61 2956.61 3276.91 3276.91 3498.65 3498.65

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7004.53 7415.97 11750.75 12105.79 17098.57 17335.53 19203.53 19547.17 23579.66 24225.75 26405.60 26832.26 29885.49 30374.64 34333.48 34776.92

Extra for inlet and discharge attenuators at 900mm long 2 m3/s at 350 Pa 5 m3/s at 350 Pa 10 m3/s at 700 Pa 15 m3/s at 700 Pa 20 m3/s at 700 Pa

1486.30 3119.39 4361.04 6499.96 8317.16

1851.42 3885.69 5432.36 8096.72 10360.32

5.00 10.00 13.00 16.00 20.00

123.19 246.38 320.30 394.21 492.77

nr nr nr nr nr

1974.61 4132.07 5752.66 8490.93 10853.09

Extra for locating units externally 2 m3/s at 350 Pa 5 m3/s at 350 Pa 10 m3/s at 700 Pa 15 m3/s at 700 Pa 20 m3/s at 700 Pa

1101.27 1397.30 2196.54 3120.06 5362.24

1371.80 1740.56 2736.13 3886.52 6679.51

-

nr nr nr nr nr

1371.80 1740.56 2736.13 3886.52 6679.51

U30: LOW VELOCITY AIR CONDITIONING Y40 – AIR HANDLING UNITS Supply air handling unit; inlet with motorised damper, LTHW frost coil ( at -5°C to +5°C), panel filter (EU4), bag filter (EU6), cooling coil (at 28°C db/20°C wb to 12°C db/11.5°C wb), LTHW heating coil (at 5°C to 21°C), supply fan, outlet plenum; includes access sections; all units located internally; Includes placing in position and fitting of sections together; electrical work elsewhere. Volume, external pressure 2 m3/s at 350 Pa 2 m3/s at 700 Pa 5 m3/s at 350 Pa 5 m3/s at 700 Pa 8 m3/s at 350 Pa 8 m/3s at 700 Pa 10 m/3 at 350 Pa 10 m3/s at 700 Pa 13 m3/s at 350 Pa 13 m3/s at 700 Pa 15 m3/s at 350 Pa 15 m3/s at 700 Pa 18 m3/s at 350 Pa 18 m3/s at 700 Pa 20 m3/s at 350 Pa 20 m3/s at 700 Pa

-

Material Costs/Prices for Measured Works – Mechanical Installations

477

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

6750.12 7076.74 11633.49 11851.85 16154.77 16542.56 18653.94 19055.80 23381.36 24114.73 26127.04 26783.33 29233.58 29918.01 31951.12 33061.88

8408.33 8815.19 14491.33 14763.33 20123.29 20606.34 23236.40 23736.98 29125.14 30038.66 32545.31 33362.82 36414.99 37267.56 39800.11 41183.74

50.00 50.00 86.00 86.00 105.00 105.00 120.00 120.00 130.00 130.00 145.00 145.00 160.00 160.00 175.00 175.00

1231.92 1231.92 2118.90 2118.90 2587.03 2587.03 2956.61 2956.61 3202.99 3202.99 3572.57 3572.57 3942.14 3942.14 4311.72 4311.72

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

9640.25 10047.11 16610.23 16882.23 22710.32 23193.38 26193.00 26693.58 32328.13 33241.66 36117.88 36935.39 40357.14 41209.70 44111.83 45495.46

Extra for inlet and discharge attenuators at 900mm long 2 m3/s at 350 Pa 5 m3/s at 350 Pa 10 m3/s at 700 Pa 15 m3/s at 700 Pa 20 m3/s at 700 Pa

2709.60 5350.68 7523.23 12648.82 14640.34

3375.23 6665.11 9371.36 15756.08 18236.83

8.00 10.00 13.00 16.00 20.00

197.11 246.38 320.30 394.21 492.77

nr nr nr nr nr

3572.34 6911.49 9691.66 16150.30 18729.60

Extra for locating units externally 2 m3/s at 350 Pa 5 m3/s at 350 Pa 10 m3/s at 700 Pa 15 m3/s at 700 Pa 20 m3/s at 700 Pa

2168.91 3079.84 4319.81 8061.97 12288.69

2701.72 3836.42 5381.00 10042.44 15307.48

-

nr nr nr nr nr

2701.72 3836.42 5381.00 10042.44 15307.48

Extra for humidifier, self generating type 2 m3/s at 350 Pa (10kg/hr) 5 m3/s at 350 Pa (18kg/hr) 10 m3/s at 700 Pa (30kg/hr) 15 m3/s at 700 Pa (60kg/hr) 20 m3/s at 700 Pa (90kg/hr)

1779.80 2202.54 2506.38 4641.66 6978.71

2217.02 2743.61 3122.09 5781.91 8693.07

5.00 5.00 6.00 8.00 10.00

123.19 123.19 147.83 197.11 246.38

nr nr nr nr nr

2340.21 2866.80 3269.92 5979.02 8939.46

Extra for mixing box 2 m3/s at 350 Pa 5 m3/s at 350 Pa 10 m3/s at 700 Pa 15 m3/s at 700 Pa 20 m3/s at 700 Pa

891.78 1235.52 1716.29 2290.62 3433.78

1110.85 1539.03 2137.91 2853.33 4277.31

4.00 4.00 5.00 6.00 6.00

98.55 98.55 123.19 147.83 147.83

nr nr nr nr nr

1209.40 1637.59 2261.10 3001.16 4425.14

Modular air handling unit with supply and extract sections. Supply side; inlet with motorised damper, LTHW frost coil ( at -5°C to 5°C ), panel filter (EU4), bag filter (EU6), cooling coil at 28°Cdb/20°Cwb to 12°Cdb/ 11.5°C wb), LTHW heating coil (at 5°C to 21° C), supply fan, outlet plenum. Extract side; inlet with motorised damper, extract fan; includes access sections; placing in position and fitting of sections together; electrical work elsewhere 2 m3/s at 350 Pa 2 m3/s at 700 Pa 5 m3/s at 350 Pa 5 m3/s at 700 Pa 8 m3/s at 350 Pa 8 m/3s at 700 Pa 10 m/3 at 350 Pa 10 m/s at 700 Pa 13 m3/s at 350 Pa 13 m3/s at 700 Pa 15 m3/s at 350 Pa 15 m3/s at 700 Pa 18 m3/s at 350 Pa 18 m3/s at 700 Pa 20 m3/s at 350 Pa 20 m3/s at 700 Pa

-

478

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

2669.71 4652.55 7986.90 11237.86 15063.49

3325.54 5795.48 9948.93 13998.51 18763.93

30.00 30.00 40.00 50.00 60.00

739.15 739.15 985.54 1231.92 1478.30

nr nr nr nr nr

4064.69 6534.63 10934.47 15230.43 20242.23

brackets) 2m3/s at 350 Pa (37kW) 5 m3/s at 350 Pa (65kW) 10 m3/s at 700 Pa (127kW) 15 m3/s at 700 Pa (160kW) 20 m3/s at 700 Pa (262kW)

5772.94 8291.34 11057.12 20716.33 24199.09

7191.10 10328.16 13773.37 25805.43 30143.75

12.00 12.00 15.00 17.00 19.00

295.66 295.66 369.58 418.85 468.13

nr nr nr nr nr

7486.76 10623.82 14142.95 26224.28 30611.88

Extra for plate heat exchanger, including additional filtration in extract leg (typical outputs in brackets) 2m3/s at 350 Pa (25kW) 5 m3/s at 350 Pa (51kW) 10 m3/s at 700 Pa (98kW) 15 m3/s at 700 Pa (160kW) 20 m3/s at 700 Pa (190kW)

3219.74 6294.17 9235.28 15948.58 20596.25

4010.69 7840.37 11503.98 19866.45 25655.85

12.00 12.00 15.00 17.00 19.00

295.66 295.66 369.58 418.85 468.13

nr nr nr nr nr

4306.35 8136.03 11873.56 20285.30 26123.98

1212.96 2233.76 3135.68 2990.36 3638.87

1510.93 2782.50 3905.98 3724.96 4532.78

-

nr nr nr nr nr

1510.93 2782.50 3905.98 3724.96 4532.78

U30: LOW VELOCITY AIR CONDITIONING – cont'd AIR HANDLING UNITS – cont'd Modular air handling unit with supply and extract sections. – cont'd Extra for runaround coil, including pump and associated pipework; typical outputs in brackets. (based on minimal distance between the supply and extract units. ) 2m3/s at 350 Pa (26kW) 5 m3/s at 350 Pa (37kW) 10 m3/s at 700 Pa (85kW) 15 m3/s at 700 Pa (151kW) 20 m3/s at 700 Pa (158kW) Extra for thermal wheel (typical outputs in

Extra for electric heating in lieu of LTHW 2m3/s at 350 Pa 5 m3/s at 350 Pa 10 m3/s at 700 Pa 15 m3/s at 700 Pa 20 m3/s at 700 Pa

-

Material Costs/Prices for Measured Works – Mechanical Installations

479

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U31: VAV AIR CONDITIONING VAV TERMINAL BOXES VAV terminal box; integral acoustic silencer; factory installed and pre wired control components (excluding electronic controller); selected at 200Pa at entry to unit; includes fixing in position; electrical work elsewhere 80 l/s – 110 l/s Extra for secondary silencer Extra for 2 row LTHW heating coil 150 l/s – 190 l/s Extra for secondary silencer Extra for 2 row LTHW heating coil 250 l/s – 310 l/s Extra for secondary silencer Extra for 2 row LTHW heating coil 420 l/s – 520 l/s Extra for secondary silencer Extra for 2 row LTHW heating coil 650 l/s – 790 l/s Extra for secondary silencer Extra for 2 row LTHW heating coil 1130 l/s – 1370 l/s Extra for secondary silencer Extra for 2 row LTHW heating coil Extra for electric heater & thyristor controls, 3kw/1ph (per box) Extra for fitting free issue box controller Fan assisted VAV terminal box; factory installed and pre wired control components (excluding electronic controller); selected at 40 Pa external static pressure; includes fixing in position, electrical work elsewhere 100 l/s – 175 l/s Extra for secondary silencer Extra for 1 row LTHW heating coil 170 l/s – 360 l/s Extra for secondary silencer Extra for 1 row LTHW heating coil 300 l/s – 640 l/s Extra for secondary silencer Extra for 1 row LTHW heating coil 620 l/s – 850 l/s Extra for secondary silencer Extra for 1 row LTHW heating coil Extra for electric heater plus thyristor controls' 3kw/lph (per box) Extra for fitting free issue controller

440.00 107.00 43.40 463.00 117.50 52.05 516.50 155.50 29.08 559.50 177.00 70.87 677.50 226.50 92.55 787.00 316.50 117.86

548.09 133.29 54.06 576.74 146.36 64.84 643.38 193.70 36.22 696.94 220.48 88.28 843.93 282.14 115.29 980.33 394.25 146.81

2.00 0.50 2.00 0.50 2.00 0.50 2.00 0.50 2.00 0.50 2.00 0.50 -

51.07 12.77 51.07 12.77 51.07 12.77 51.07 12.77 51.07 12.77 51.07 12.77 -

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

599.16 146.05 54.06 627.81 159.13 64.84 694.45 206.47 36.22 748.02 233.25 88.28 895.00 294.91 115.29 1031.40 407.02 146.81

344.04 -

428.56 -

2.13

54.39

nr nr

428.56 54.39

974.00 116.00 61.44 1062.50 147.00 70.09 1218.00 225.00 78.07 1218.00 225.00 78.07

1213.27 144.50 76.53 1323.51 183.11 87.31 1517.21 280.27 97.25 1517.21 280.27 97.25

3.00 0.50 3.00 0.50 3.00 0.50 3.00 0.50 -

76.61 12.77 76.61 12.77 76.61 12.77 76.61 12.77 -

nr nr nr nr nr nr nr nr nr nr nr nr

1289.88 157.26 76.53 1400.12 195.88 87.31 1593.82 293.04 97.25 1593.82 293.04 97.25

344.04 -

428.56 -

2.13

54.39

nr nr

428.56 54.39

480

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U41: FAN COIL AIR CONDITIONING FAN COIL UNITS All selections based on summer return air condition of 23°C @ 50% RH, CHW @ 6°/12°C, LTHW @ 82°/71°C (where applicable), medium speed, external resistance of 30Pa All selections are based on heating and cooling units. For waterside control units there is no significant reduction in cost between 4 pipe heating and cooling and 2 pipe cooling only units (excluding controls). For airside control units, there is a marginal reduction (less than 5%) between 4 pipe heating and cooling units and 2 pipe cooling only units (excluding controls) Ceiling void mounted horizontal waterside control fan coil unit; cooling coil ; LTHW heating coil; multi tapped speed transformer; fine wire mesh filter; includes fixing in position; electrical work elsewhere Total cooling load, heating load 2800 W, 1000 W 4000 W, 1700 W 4500 W, 1900 W 6000 W, 2600 W

288.27 335.16 370.44 433.98

331.89 385.88 426.50 499.65

4.00 4.00 4.00 4.00

98.55 98.55 98.55 98.55

nr nr nr nr

430.45 484.43 525.05 598.21

Ceiling void mounted horizontal waterside control fan coil unit; cooling coil ; electric heating coil; multi tapped speed transformer; fine wire mesh filter; includes fixing in position; electrical work elsewhere + thyristor and 2 No. HTCO's Total cooling load, heating load 2800W, 1500W 4000W, 2000W 4500W, 2000W 6000W, 3000W

423.27 470.16 505.44 568.98

487.32 541.31 581.93 655.08

4.00 4.00 4.00 4.00

98.55 98.55 98.55 98.55

nr nr nr nr

585.87 639.86 680.48 753.63

Ceiling void mounted horizontal airside control fan coil unit; cooling coil ; LHTW heating coil; multi tapped speed transformer; fine wire mesh filter, damper actuator & fixing kit; includes fixing in position; electrical work elsewhere Total cooling load, heating load 2600W, 2200W 3600W, 3200W 4000W, 3600W 5400W, 5000W

588.33 630.45 694.53 760.32

677.36 725.85 799.63 875.38

4.00 4.00 4.00 4.00

98.55 98.55 98.55 98.55

nr nr nr nr

775.91 824.41 898.18 973.93

Material Costs/Prices for Measured Works – Mechanical Installations

481

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Ceiling void mounted horizontal airside control fan coil unit; cooling coil ; electric heating coil; multi tapped speed transformer; fine wire mesh filter, damper actuator & fixing kit; includes fixing in position; electrical work elsewhere + thyristor and 2 No. HTCO's Total cooling load, heating load 2600W, 1500W 3600W, 2000W 4000W, 2000W 5400W, 3000W

696.33 738.45 802.53 868.32

801.70 850.20 923.97 999.72

4.00 4.00 4.00 4.00

98.55 98.55 98.55 98.55

nr nr nr nr

900.26 948.75 1022.53 1098.27

Ceiling void mounted slimline horizontal waterside control fan coil unit, 170mm deep; cooilng coil; LTHW heating coil; multi tapped speed transformer; fine wire mesh filter; includes fixing in position; electrical work elsewhere Total cooling load, heating load 1100W, 1500W 3200W, 3700W

468.65 573.82

539.57 660.66

3.50 4.00

86.23 98.55

nr nr

625.80 759.21

Ceiling void mounted slimline horizontal waterside control fan coil unit, 170mm deep; cooilng coil; electric heating coil; multi tapped speed transformer; fine wire mesh filter; includes fixing in position; electrical work elsewhere Total cooling load, heating load – NOT WITHIN OUR RANGE OF MANUFACTURE 1100W, 1000W. 3400W, 2000W

575.16 680.34

662.20 783.29

3.50 4.00

86.23 98.55

nr nr

748.43 881.84

Ceiling void mounted slimline horizontal airside control fan coil unit, 170mm deep; cooling coil; LTHW heating coil; multi tapped speed transformer; fine wire mesh filter,damper actuator & fixing kit; includes fixing in position; electrical work elsewhere Total cooling load, heating load – NOT WITHIN OUR RANGE OF MANUFACTURE 1000W, 1600W. 3000W, 3300W 4500W, 4500W

507.13 790.14 1012.86

583.87 909.70 1166.13

3.50 4.00 4.00

86.23 98.55 98.55

nr nr nr

670.11 1008.26 1264.68

Ceiling void mounted slimline horizontal airside control fan coil unit, 170mm deep; cooilng coil; electric heating coil; multi tapped speed transformer; fine wire mesh filter,damper actuator & fixing kit; includes fixing in position; electrical work elsewhere Total cooling load, heating load – NOT WITHIN OUR RANGE OF MANUFACTURE 1000W, 1000W. 3000W, 2000W 4500W, 3000W

747.04 984.06 1249.83

860.09 1132.97 1438.96

3.50 4.00 4.00

86.23 98.55 98.55

nr nr nr

946.33 1231.53 1537.51

482

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U41: FAN COIL AIR CONDITIONING – cont'd FAN COIL UNITS – cont'd All selections are based on heating and cooling units. – cont'd Low level perimeter waterside control fan coil unit; cooling coil; LTHW heating coil; multi tapped speed transformer; fine wire mesh filter; includes fixing in position; electrical work elsewhere – NOT WITHIN OUR RANGE OF MANUFACTURE Total cooling load, heating load 1700W, 1400W Extra over for standard cabinet 2200W, 1900W Extra over for standard cabinet 2600W, 2200W Extra over for standard cabinet 3900W, 3200W Extra over for standard cabinet 4600W, 3900W Extra over for standard cabinet

359.15 191.07 416.62 232.74 459.72 238.48 603.39 260.03 689.57 341.92

413.50 219.98 479.66 267.96 529.29 274.57 694.69 299.38 793.92 393.66

3.50 1.00 3.50 1.00 3.50 1.00 3.50 1.00 3.50 1.00

86.23 24.64 86.23 24.64 86.23 24.64 86.23 24.64 86.23 24.64

nr nr nr nr nr nr nr nr nr nr

499.74 244.62 565.90 292.60 615.52 299.21 780.93 324.02 880.15 418.30

Low level perimeter waterside control fan coil unit; cooling coil; electric heating coil; multi tapped speed transformer; fine wire mesh filter; includes fixing in position; electrical work elsewhere – NOT WITHIN OUR RANGE OF MANUFACTURE Total cooling load, heating load 1700W, 1500W Extra over for standard cabinet 2200W, 2000W Extra over for standard cabinet 2600W, 2000W Extra over for standard cabinet 3800W, 3000W Extra over for standard cabinet 4600W, 4000W Extra over for standard cabinet

466.91 191.07 488.46 232.74 610.57 238.48 725.50 260.03 883.53 341.92

537.57 219.98 562.37 267.96 702.96 274.57 835.29 299.38 1017.23 393.66

3.50 1.00 3.50 1.00 3.50 1.00 3.50 1.00 3.50 1.00

86.23 24.64 86.23 24.64 86.23 24.64 86.23 24.64 86.23 24.64

nr nr nr nr nr nr nr nr nr nr

623.80 244.62 648.61 292.60 789.20 299.21 921.52 324.02 1103.46 418.30

Low level perimeter airside control fan coil unit; cooling coil; LTHW heating coil; multi tapped speed transformer; fine wire mesh filter; damper actuator & fixing kit; includes fixing in position; electrical work elsewhere – NOT WITHIN OUR RANGE OF MANUFACTURE Total cooling load, heating load 1200W, 1400W Extra over for standard cabinet 1800W, 2000W Extra over for standard cabinet 2200W, 2400W Extra over for standard cabinet 3200W, 3600W Extra over for standard cabinet

464.03 191.07 518.63 232.74 558.86 238.48 725.50 260.03

534.25 219.98 597.11 267.96 643.42 274.57 835.29 299.38

3.50 1.00 3.50 1.00 3.50 3.50 1.00

86.23 24.64 86.23 24.64 86.23 86.23 24.64

nr nr nr nr nr nr nr nr

620.48 244.62 683.34 292.60 729.66 921.52 324.02

Material Costs/Prices for Measured Works – Mechanical Installations

483

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Low level perimeter airside control fan coil unit; cooling coil; electric heating coil; multi tapped speed transformer; fine wire mesh filter; damper actuator & fixing kit; includes fixing in position; electrical work elsewhere – NOT WITHIN OUR RANGE OF MANUFACTURE Total cooling load, heating load 1250W, 1500W Extra over for standard cabinet 1900W, 2000W Extra over for standard cabinet 2300W, 2000W Extra over for standard cabinet 3300W, 3000W Extra over for standard cabinet

632.12 191.07 682.41 232.74 780.09 238.48 890.70 260.03

727.77 219.98 785.67 267.96 898.14 274.57 1025.49 299.38

3.50 1.00 3.50 1.00 3.50 1.00 3.50 1.00

86.23 24.64 86.23 24.64 86.23 24.64 86.23 24.64

nr nr nr nr nr nr nr nr

814.00 244.62 871.91 292.60 984.38 299.21 1111.72 324.02

Typical DDC control pack for airside control units; controller, return air sensor (damper and damper actuator included in above rates) Heating and cooling, per unit Cooling only, per unit

153.00 180.00

176.15 207.24

2.00 2.00

49.28 49.28

nr nr

225.43 256.52

Typical DDC control pack for waterside control units; controller, return air sensor, four port valves and actuators Heating and cooling, per unit Cooling only, per unit

135.00 117.00

155.43 134.71

2.00 2.00

49.28 49.28

nr nr

204.71 183.98

Note: Care needs to be taken when using these controls prices, as they can vary significantly, depending on the equipment manufacturer specified and the degree of control required

484

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U70: AIR CURTAINS The selection of air curtains requires consideration of the particular conditions involved; climatic conditions, wind influence, construction and position all influence selection; consultation with a specialist manufacturer is therefore advisable. Commercial grade air curtains; recessed or exposed units with rigid sheet steel casing; aluminium grilles; high quality motor/ centrifugal fan assembly; includes fixing in position; electrical work elsewhere Ambient temperature; 240V single phase supply; mounting height 2.40m 1000 x 590 x 270mm 1500 x 590 x 270mm 2000 x 590 x 270mm 2500 x 590 x 270mm

2317.00 2966.00 3589.00 3989.00

2667.62 3414.83 4132.11 4592.64

12.05 12.05 12.05 13.00

296.85 296.85 296.89 320.30

nr nr nr nr

2964.47 3711.68 4429.00 4912.93

Ambient temperature; 240V single phase supply; mounting height 2.80m 1000 x 590 x 270mm 1500 x 590 x 270mm 2000 x 590 x 270mm 2500 x 590 x 270mm

2678.00 3418.00 4261.00 4928.00

3083.25 3935.23 4905.80 5673.73

16.13 16.13 16.13 17.10

397.39 397.39 397.39 421.32

nr nr nr nr

3480.64 4332.62 5303.19 6095.05

Ambient temperature 240V single phase supply; mounting height 3.30m 1000 x 774 x 370mm 1500 x 774 x 370mm 2000 x 774 x 370mm 2500 x 774 x 370mm

3498.00 4731.00 5851.00 6926.00

4027.33 5446.92 6736.40 7974.08

17.24 17.24 17.24 18.30

424.80 424.80 424.80 450.88

nr nr nr nr

4452.14 5871.72 7161.20 8424.96

Ambient temperature; 240V single phase supply; mounting height 4.00m 1000 x 774 x 370mm 1500 x 774 x 370mm 2000 x 774 x 370mm 2500 x 774 x 370mm

3864.00 5069.00 6310.00 7395.00

4448.72 5836.07 7264.86 8514.05

19.10 19.10 19.10 19.90

470.59 470.59 470.59 490.30

nr nr nr nr

4919.31 6306.66 7735.45 9004.35

Water heated; 240V single phase supply; mounting height 2.40m 1000 x 590 x 270mm; 2.30 – 9.40kW output 1500 x 590 x 270mm; 3.50 – 14.20kW output 2000 x 590 x 270mm; 4.70 – 19.00kW output 2500 x 590 x 270mm; 5.90 – 23.70kW output

2727.00 3490.00 4223.00 4694.00

3139.66 4018.12 4862.05 5404.32

12.05 12.05 12.05 13.00

296.85 296.85 296.85 320.30

nr nr nr nr

3436.51 4314.97 5158.89 5724.62

Water heated; 240V single phase supply; mounting height 2.80m 1000 x 590 x 270mm; 3.30 – 11.90kW output 1500 x 590 x 270mm; 5.00 – 17.90kW output 2000 x 590 x 270mm; 6.70 – 23.90kW output 2500 x 590 x 270mm; 8.30 – 29.80kW output

3151.00 4023.00 5014.00 5798.00

3627.83 4631.78 5772.74 6675.38

16.13 16.13 16.13 17.10

397.39 397.39 397.39 421.32

nr nr nr nr

4025.22 5029.17 6170.14 7096.70

Material Costs/Prices for Measured Works – Mechanical Installations

485

U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Water heated; 240V single phase supply; mounting height 3.30m 1000 x 774 x 370mm; 6.10 – 21.80kW output 1500 x 774 x 370mm; 9.20 – 32.80kW output 2000 x 774 x 370mm; 12.30 – 43.70kW output 2500 x 774 x 370mm; 15.30 – 54.60kW output

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4116.00 5566.00

4738.85 6408.27

17.24 17.24

424.80 424.80

nr nr

5163.65 6833.08

6884.00

7925.72

17.24

424.80

nr

8350.52

8149.00

9382.15

18.30

450.88

nr

9833.03

4546.00

5233.92

19.10

470.59

nr

5704.52

5964.00

6866.50

19.10

470.59

nr

7337.10

Water heated; 240V single phase supply; mounting height 4.00m 1000 x 774 x 370mm; 7.20 – 24.20kW output 1500 x 774 x 370mm; 10.90 – 36.30kW output 2000 x 774 x 370mm; 14.50 – 48.40kW output 2500 x 774 x 370mm; 18.10 – 60.60kW output

7424.00

8547.44

19.10

470.59

nr

9018.03

8701.00

10017.68

19.90

490.30

nr

10507.98

Electrically heated; 415V three phase supply; mounting height 2.40m 1000 x 590 x 270mm; 2.30 – 9.40kW output 1500 x 590 x 270mm; 3.50 – 14.20kW output 2000 x 590 x 270mm; 4.70 – 19.00kW output 2500 x 590 x 270mm; 5.90 – 23.70kW output

3350.00 4167.00 4967.00 5647.00

3856.94 4797.57 5718.63 6501.53

12.05 12.05 12.05 13.00

296.85 296.85 347.98 375.47

nr nr nr nr

4153.79 5094.42 6066.61 6877.00

Electrically heated; 415V three phase supply; mounting height 2.80m 1000 x 590 x 270mm; 3.30 – 11.90kW output 1500 x 590 x 270mm; 5.00 – 17.90kW output 2000 x 590 x 270mm; 6.70 – 23.90kW output 2500 x 590 x 270mm; 8.30 – 29.80kW output

3944.00 4949.00 6123.00 6844.00

4540.83 5697.91 7049.56 7879.67

16.13 16.13 16.13 17.10

465.84 397.39 397.39 421.32

nr nr nr nr

5006.67 6095.30 7446.96 8300.98

5992.00 8029.00

6898.74 9243.99

17.24 17.24

497.93 424.77

nr nr

7396.67 9668.75

9690.00

11156.34

17.24

424.77

nr

11581.11

11471.00

13206.85

18.30

450.88

nr

13657.73

6613.00

7613.71

19.10

551.65

nr

8165.36

8580.00

9878.37

19.10

470.59

nr

10348.96

10377.00

11947.30

19.10

470.59

nr

12417.89

12292.00

14152.09

19.90

490.30

nr

14642.39

Electrically heated; 415V three phase supply; mounting height 3.30m 1000 x 774 x 370mm; 6.10 – 21.80kW output 1500 x 774 x 370mm; 9.20 – 32.80kW output 2000 x 774 x 370mm; 12.30 – 43.70kW output 2500 x 774 x 370mm; 15.30 – 54.60kW output Electrically heated; 415V three phase supply; mounting height 4.00m 1000 x 774 x 370mm; 7.20 – 24.20kW output 1500 x 774 x 370mm; 10.90 – 36.30kW output 2000 x 774 x 370mm; 14.50 – 48.40kW output 2500 x 774 x 370mm; 18.10 – 60.60kW output

486

Material Costs/Prices for Measured Works – Mechanical Installations U: VENTILATION/AIR CONDITIONING SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

U70: AIR CURTAINS – cont'd Industrial grade air curtains; recessed or exposed units with rigid sheet steel casing; aluminium grilles; high quality motor/centrifugal fan assembly; includes fixing in position; electrical work elsewhere Ambient temperature; 415V three phase supply; including wiring between multiple units; horizontally or vertically mounted; opening maximum 6.00m 1500 x 585 x 853mm; 1.6A supply 2000 x 585 x 853mm; 2.1A supply

2415.00 2945.00

2780.45 3390.65

17.24 17.24

424.80 424.80

nr nr

3205.25 3815.45

2795.00

3217.95

17.24

424.80

nr

3642.75

3375.00

3885.72

17.24

424.80

nr

4310.52

Water heated; 415V three phase supply; including wiring between multiple units; vertically mounted in single bank for openings maximum 6.00m wide or opposing twin banks for openings maximum 10.00m wide 1500 x 585mm; 1.6A supply; 41.1kW output 2000 x 585mm; 2.1A supply; 57.7kW output

2795.00 3375.00

3217.95 3885.72

17.24 17.24

424.80 424.80

nr nr

3642.75 4310.52

Remote mounted electronic controller unit; 415V three phase supply; excluding wiring to units Five speed, 7A

425.00

489.31

5.00

123.19

nr

612.51

Water heated; 415V three phase supply; including wiring between multiple units; horizontally or vertically mounted; opening maximum 6.00m 1500 x 585 x 956mm; 1.6A supply; 34.80kW output 2000 x 585 x 956mm; 2.1A supply; 50.70kW output

Electrical Installations

Material Costs/Measured Work Prices DIRECTIONS The following explanations are given for each of the column headings and letter codes. Unit

Prices for each unit are given as singular (i.e. 1 metre, 1 nr) unless stated otherwise.

Net price

Industry tender prices, plus nominal allowance for fixings, waste and applicable trade discounts.

Material cost

Net price plus percentage allowance for overheads, profit and preliminaries.

Labour norms

In man-hours for each operation.

Labour cost

Labour constant multiplied by the appropriate all-in man-hour cost based on gang rate. (See also relevant Rates of Wages Section) plus percentage allowance for overheads, profit and preliminaries.

Measured work Price (total rate)

Material cost plus Labour cost.

MATERIAL COSTS The Material Costs given are based at Second Quarter 2009 but exclude any charges in respect of VAT. Users of the book are advised to register on the SPON’s website www.pricebooks.co.uk/updates to receive the free quarterly updates – alerts will then be provided by e-mail as changes arise. MEASURED WORK PRICES These prices are intended to apply to new work in the London area. The prices are for reasonable quantities of work and the user should make suitable adjustments if the quantities are especially small or especially large. Adjustments may also be required for locality (e.g. outside London – refer to cost indices in approximate estimating section for details of adjustment factors) and for the market conditions (e.g. volume of work secured or being tendered) at the time of use. ELECTRICAL INSTALLATIONS The labour rate has been based on average gang rates per man hour effective from 4 January 2010 including allowances for all other emoluments and expenses. To this rate has been added 4% and 8% to cover site and head office overheads and preliminary items together with a further 2% for profit, resulting in an inclusive rate of £28.35 per man hour. The rate has been calculated on a working year of 2025 hours; a detailed buildup of the rate is given at the end of these directions. In calculating the 'Measured Work Prices' the following assumptions have been made: (a) That the work is carried out as a subcontract under the Standard Form of Building Contract. (b) That, unless otherwise stated, the work is being carried out in open areas at a height which would not require more than simple scaffolding. (c) That the building in which the work is being carried out is no more than six storey's high. Where these assumptions are not valid, as for example where work is carried out in ducts and similar confined spaces or in multistorey structures when additional time is needed to get to and from upper floors, then an appropriate adjustment must be made to the prices. Such adjustment will normally be to the labour element only.

488

Material Costs/Measured Work Prices – Electrical Installations DIRECTIONS

LABOUR RATE – ELECTRICAL The annual cost of a notional eleven man gang TECHNICIAN 1 NR Hourly Rate from 4 January 2010

18.10

Working hours per annum per man x Hourly rate x nr of men = £ per annum

Overtime Rate Overtime hours per annum per man x Hourly rate x nr of men = £ per annum

Total

Incentive schemes (insert percentage)

Daily Travel Time Allowance (15-20 miles each way) effective from 04/01/10 Days per annum per man

5.00%

APPROVED ELECTRICIANS LABOURERS ELECTRICIANS 4 NR 4 NR 2 NR 16.07

14.83

1,687.50

1,687.50

1,687.50

30,543.75

108,472.50

100,102.50

SUBTOTALS

11.89

1,687.50 40,128.75 279,247.50

27.15

24.11

22.25

17.84

337.50

337.50

337.50

337.50

9,163.13

32,541.75

30,030.75

12,038.63

39,706.88

141,014.25

130,133.25

1,985.34

7,050.71

6,506.66

2,608.37

5.03

5.03

5.03

5.03

83,774.25

52,167.38 363,021.75

18,151.09

225.00

225.00

225.00

225.00

1,131.75

4,527.00

4,527.00

2,263.50

3.45

3.45

3.45

3.45

Days per annum per man

225.00

225.00

225.00

225.00

x nr of men = £ per annum

776.25

3,105.00

3,105.00

1,552.50

8,538.75

1,220.12

4,353.49

4,031.59

1,634.19

11,239.38

JIB combined benefits scheme (nr of weeks per man)

52.00

52.00

52.00

52.00

Benefit Credit effective from 29 September 2008

59.69

54.21

50.83

43.09

3,103.88

11,275.68

10,572.64

4,481.36

55.32

49.38

45.79

36.99

2,876.77

10,271.82

9,524.06

3,847.09

43,600.22

155,696.96

144,271.91

58,591.74

12.80

12.80

12.80

12.80

4,843.01

16,977.93

15,515.52

6,024.10

x nr of men = £ per annum

Daily Travel Allowance (15-20 miles each way) effective from 04/01/10

JIB Pension Scheme @ 2.5%

x nr of men = £ per annum

Holiday Top-up Funding x nr of men @ 7.5 hrs per day = £ per annum

12,449.25

29,433.56

26,519.74

National Insurance Contributions: Annual gross pay (subject to NI) each % of NI Contributions £ Contributions/annum

43,360.55

Material Costs/Measured Work Prices – Electrical Installations

489

DIRECTIONS

LABOUR RATE – ELECTRICAL The annual cost of a notional eleven man gang SUB-TOTAL SUB-TOTAL TRAINING (INCLUDING ANY TRADE REGISTRATIONS) – SAY1.00%

512,714.07 5,127.14

SEVERANCE PAY AND SUNDRY COSTS – SAY1.50%

7,767.62

EMPLOYER'S LIABILITY AND THIRD PARTY INSURANCE – SAY2.00%

10,512.18

ANNUAL COST OF NOTIONAL GANG MEN ACTUALLY WORKING = 10.5 AVERAGE NR OF HOURS WORKED PER MAN =

2025

536,121.01

THEREFORE ANNUAL COST PER PRODUCTIVE MAN

51,059.14

THEREFORE ALL IN MAN HOUR

25.21

PRELIMINARY ITEMS – SAY8.00% SITE AND HEAD OFFICE OVERHEADS – SAY4.00% PROFIT – SAY 2.00% THEREFORE INCLUSIVE MAN HOUR

2.02 1.09 0.57 28.89

Notes: (1) (2)

(3) (4) (5) (6) (7)

Hourly wage rates are those effective from 4 January 2010. The following assumptions have been made in the above calculations: (a) Hourly rates are based on London rate and job reporting own transport. (b) The working week of 37.5 hours is made up of 7.5 hours Monday to Friday. (c) Five days in the year are lost through sickness or similar reason. (d) A working year of 2025 hours. The incentive scheme addition of 5% is intended to reflect bonus schemes typically in use. National insurance contributions are those effective from 6 April 2009, paid for 48 weeks. Calculation is based on employer making regular payment into the holiday pay scheme, allowing savings on NI. Weekly JIB Combined Benefit Credit Scheme are those effective from 29 September 2008. Paid Holidays with effect from 9 January 2006, for all 30 days (22 Annual and 8 Public) are to be paid at normal earnings level. Overtime is paid after 37.5 hours.

490

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Three phase, 400 Volt, four wire 50 Hz packagedstandby diesel generating set, complete with radio and television suppressors, daily service fuel tank and associated piping, 4 metres of exhaust pipe and primary exhaust silencer, control panel, mains failure relay, starting battery with charger, all internal wiring, interconnections, earthing and labels. Rated for standby duty; including UK delivery, installation and commissioning 60 kVA 100 kVA 150 kVA 315 kVA 500 kVA 750 kVA 1000 kVA 1500kVA 2000kVA 2500kVA

15399.72 21588.83 24690.32 44515.20 52469.70 89290.06 118674.14 139667.99 215140.92 294557.00

17642.90 24733.54 28286.81 50999.47 60112.64 102296.41 135960.69 160012.58 246479.21 337463.35

100.00 100.00 100.00 120.00 120.00 140.00 140.00 170.00 170.00 210.00

2888.22 2888.22 2888.22 3465.86 3465.86 4043.51 4043.51 4909.97 4909.97 6065.26

nr nr nr nr nr nr nr nr nr nr

20531.12 27621.76 31175.03 54465.33 63578.50 106339.92 140004.20 164922.56 251389.18 343528.61

Extra for residential silencer; peformance 75dBA at 1m; including connection to exhaust pipe 60 kVA 100 kVA 150 kVA 315 kVA 500 kVA 750 kVA 1000kVA 1500kVA 2000kVA 2500kVA

826.81 987.97 1132.99 2204.01 2818.85 4199.75 5656.29 9010.63 9759.36 11158.86

947.25 1131.88 1298.02 2525.05 3229.45 4811.50 6480.21 10323.16 11180.95 12784.30

10.00 10.00 10.00 15.00 15.00 20.00 20.00 20.00 30.00 30.00

288.82 288.82 288.82 433.23 433.23 577.64 577.64 577.64 866.47 866.47

nr nr nr nr nr nr nr nr nr nr

1236.07 1420.70 1586.84 2958.29 3662.68 5389.15 7057.85 10900.80 12047.41 13650.77

Synchronisation panel for paralleling generators – not generators to mains; including interconnecting cables; commissioning and testing; fixing to backgrounds 2 x 60 kVA 2 x 100 kVA 2 x 150 kVA 2 x 315 kVA 2 x 500 kVA 2 x 750kVA 2 x 1000kVA 2 x 1500kVA 2 x 2000kVA 2 x 2500kVA

6887.19 7404.12 9314.33 15834.62 22860.67 25797.27 27802.94 32913.81 35662.00 41576.12

7890.41 8482.64 10671.10 18141.16 26190.64 29555.01 31852.83 37708.16 40856.66 47632.27

80.00 80.00 80.00 80.00 80.00 80.00 120.00 120.00 120.00 120.00

2310.58 2310.58 2310.58 2310.58 2310.58 2310.58 3465.86 3465.86 3465.86 3465.86

nr nr nr nr nr nr nr nr nr nr

10200.98 10793.21 12981.67 20451.73 28501.22 31865.58 35318.70 41174.03 44322.53 51098.13

V10: ELECTRICAL GENERATION PLANT STANDBY GENERATORS Standby diesel generating sets; supply and installation; fixing to base; all supports and fixings; all necessary connections to equipment

Material Costs/Prices for Measured Works – Electrical Installations

491

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Prefabricated drop-over acoustic housing; performance 85dBA at 1m over the range from 60kVA to 315kVA, 75dBA from 500kVA to 2500kVA 60kVA 100kVA 150kVA 315kVA 500kVA 750kVA 1000kVA 1500kVA 2000kVA 2500kVA

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

2975.03 3077.91 4998.06 10664.25 17613.44 27757.08 35116.57 69656.72 83726.16 116447.83

3408.39 3526.25 5726.10 12217.65 20179.08 31800.29 40231.79 79803.20 95922.04 133410.09

4.00 7.00 15.00 25.00 40.00 40.00 40.00 40.00 60.00 70.00

115.53 202.18 433.23 722.05 1155.29 1155.29 1155.29 1155.29 1732.93 2021.75

nr nr nr nr nr nr nr nr nr nr

3523.92 3728.43 6159.33 12939.71 21334.37 32955.58 41387.07 80958.49 97654.98 135431.84

90586.01 96488.85 101256.54 110300.37 117375.85 123619.25 118056.95 154439.48 145981.96 160512.05 217668.06 252006.19 346905.81 320115.97 381131.53 515364.00 639948.69 724518.34 864938.00 946158.36 943888.03 1036517.34 1346210.00 1627400.00 1751000.00 2060000.00

103781.13 110543.81 116005.97 126367.17 134473.29 141626.13 135253.60 176935.75 167246.28 183892.88 249374.46 288714.42 397437.50 366745.34 436648.67 590433.98 733166.18 830054.57 990928.33 1083979.57 1081378.54 1187500.60 1542304.33 1864453.59 2006057.66 2360067.84

-

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

103781.13 110543.81 116005.97 126367.17 134473.29 141626.13 135253.60 176935.75 167246.28 183892.88 249374.46 288714.42 397437.50 366745.34 436648.67 590433.98 733166.18 830054.57 990928.33 1083979.57 1081378.54 1187500.60 1542304.33 1864453.59 2006057.66 2360067.84

COMBINED HEAT AND POWER (CHP) UNITS Gas fired engine; acoustic enclosure complete with exhaust fan and attenuators; exhaust gas attenuation; includes 6m long pipe connections; dry air cooler for secondary water circuit to reject excess heat; controls and panel; commissioning Electrical output; Heat output 82 kW; 132 kW 100kW, 148kW 118kW, 181kW 130kW, 201kW 140kW, 207kW 150kW, 208kW 160kW, 216kW 198kW, 233kW 210kW, 319kW 237kW, 359kW 307kW, 435kW 380kW, 500kW 490kW, 679kW 501kW, 518kW 600kW, 873kW 725kW, 1019kW 975kW, 1293kW 1160kW, 1442kW 1379kW, 1475kW 1566kW, 1647kW 1600kW, 1625kW 1760kW, 1821kW 2430kW 2931kW 3500kW 3900kW Note: The costs detailed are based on a specialist subcontract package, as part of the M&E contract works, and include installation

-

492

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V11: HV SUPPLY Y61 – HV CABLES Cable; 6350/11000 volts, 3 core, XLPE; stranded copper conductors; steel wire armoured; LSOH to BS 7835 Laid in trench/duct including marker tape (cable tiles measured elsewhere) 95mm2 120mm2 150mm2 185mm2 240mm2 300mm2

29.66 32.63 39.05 42.39 49.37 56.36

33.97 37.39 44.74 48.56 56.56 64.57

0.23 0.23 0.25 0.25 0.27 0.29

6.64 6.64 7.22 7.22 7.80 8.38

m m m m m m

40.62 44.03 51.96 55.79 64.35 72.94

Cable tiles; single width; laid in trench above cables on prepared sand bed (cost of excavation excluded); reinforced concrete covers; concave/convex ends 914 x 152 x 63/38mm 914 x 229 x 63/38mm 914 x 305 x 63/38mm

10.35 12.19 13.57

11.86 13.96 15.54

0.11 0.11 0.11

3.18 3.18 3.18

m m m

15.04 17.14 18.72

Clipped direct to backgrounds including cleats 95mm2 120mm2 150mm2 185mm2 240mm2 300mm2

37.62 40.60 46.78 51.26 59.27 67.37

43.10 46.51 53.60 58.73 67.91 77.19

0.47 0.50 0.53 0.55 0.60 0.68

13.57 14.44 15.31 15.89 17.33 19.64

m m m m m m

56.67 60.95 68.90 74.62 85.24 96.83

444.58 442.16 475.61 476.76 498.14 537.17

509.34 506.57 544.88 546.20 570.70 615.42

4.75 5.30 6.00 6.90 7.43 8.75

137.19 153.08 173.29 199.29 214.59 252.72

m m m m m m

646.53 659.64 718.18 745.49 785.29 868.14

32.30 34.86 42.65 44.51 51.64

37.01 39.93 48.86 50.99 59.16

0.22 0.22 0.24 0.26 0.34

6.35 6.35 6.93 7.51 9.82

m m m m m

43.36 46.29 55.80 58.50 68.98

Terminations for above cables, including heat-shrink kit and glanding off 95mm2 120mm2 150mm2 185mm2 240mm2 300mm2 Cable; 6350/11000volts, 3 core, paper insulated; lead sheathed; steel wire armoured; stranded copper conductors; to BS 6480 Laid in trench/duct including marker tape. (cable tiles measured elsewhere) 95mm2 120mm2 150mm2 185mm2 240mm2

Material Costs/Prices for Measured Works – Electrical Installations

493

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Cable tiles; single width; laid in trench above cables on prepared sand bed (cost of excavation excluded); reinforced concrete covers; concave/convex ends 914 x 152 x 63/38mm 914 x 229 x 63/38mm 914 x 305 x 63/38mm

10.35 12.19 13.57

11.86 13.96 15.54

0.11 0.11 0.11

3.18 3.18 3.18

m m m

15.04 17.14 18.72

Clipped direct to backgrounds including cleats 95mm2 120mm2 150mm2 185mm2 240mm2

41.28 43.83 51.35 54.39 62.69

47.30 50.21 58.83 62.31 71.82

0.55 0.63 0.66 0.72 0.82

15.89 18.20 19.06 20.80 23.68

m m m m m

63.18 68.41 77.90 83.10 95.50

496.33 505.30 527.81 528.93 556.27 589.91

568.63 578.90 604.69 605.98 637.30 675.84

4.75 5.30 6.10 6.90 7.43 8.75

137.19 153.08 176.18 199.29 214.59 252.72

m m m m m m

705.82 731.98 780.87 805.26 851.89 928.55

Terminations for above cables, including compound joint and glanding off 95mm2 120mm2 150mm2 185mm2 240mm2 300mm2

494

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

18744.45

21474.84

31.70

915.57

nr

22390.41

56163.99

64345.06

67.83

1959.08

nr

66304.14

93590.28

107223.02

99.17

2864.25

nr

110087.27

11301.25

12947.44

67.83

1959.08

nr

14906.52

1706.48 853.25 100.34

1955.06 977.53 114.96

-

-

nr nr nr

1955.06 977.53 114.96

220.15

252.21

-

-

nr

252.21

2035.94 3261.73 3327.28 3630.46 3879.48

2332.50 3736.85 3811.94 4159.29 4444.58

6.50 8.50 6.50 8.50 10.00

nr nr nr nr nr

2520.24 3982.35 3999.68 4404.78 4733.40

V11: HV SUPPLY – cont'd Y70 – HV SWITCHGEAR AND TRANSFORMERS HV Circuit Breakers; installed on prepared foundations including all supports, fixings and inter panel connections where relevant. Excludes main and multi core cabling and heat shrink cable termination kits Three phase 11kV, 630 Amp, Air or SF6 insulated, with fixed pattern vacuum or SF6 circuit breaker panels; hand charged spring closing operation; prospective fault level up to 25 kA for 3 seconds. Feeders include ammeter with selector switch, 3 pole IDMT, overcurrent and earth fault relays with necessary current relays with necessary current transformers; incomers include 3 phase VT, voltmeter and phase selector switch; Includes IDMT overcurrent and earth fault relays/CTs Single panel with cable chamber Three panel with one incomer and two feeders; with cable chambers Five panel with two incoming, two feeders and a bus section; with cable chambers Ring Main Unit (RMU) Three phase 11kV, 630 Amp, SF6 insulated RMU with vacuum or SF6 200 Amp circuit breaker tee-off, Includes IDMT overcurrent and earth fault relays/CTs for tee-off and cable boxes. 3 way Ring Main Unit Extra for, Remote actuator to ring switches (per switch) Remote tripping of circuit breaker 3 – Phase Neon indicators (per circuit) Pressure gauge with alarm contacts (for SF6 only) Tripping Batteries Battery chargers; switchgear tripping and closing; double wound transformer and earth screen; including fixing to background, commissioning and testing Valve regulated lead acid battery 30 volt; 19 Ah; 3A 30 volt; 29 Ah; 3A 110 volt; 19 Ah; 3A 110 volt; 29 Ah; 3A 110 volt; 38 Ah; 3A

187.73 245.50 187.73 245.50 288.82

Material Costs/Prices for Measured Works – Electrical Installations

495

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Oil-filled in free breathing ventilated steel tank 500kVA 800kVA 1000kVA 1250kVA 1500kVA 2000kVA

8076.92 9198.34 10425.12 12667.92 15011.59 19497.18

9253.44 10538.21 11943.69 14513.18 17198.24 22337.22

30.00 30.00 30.00 35.00 35.00 40.00

866.47 866.47 866.47 1010.88 1010.88 1155.29

nr nr nr nr nr nr

10119.91 11404.67 12810.15 15524.06 18209.12 23492.50

MIDEL – filled in gasket-sealed steel tank 500kVA 800kVA 1000kVA 1250kVA 1500kVA 2000kVA

10698.00 12193.21 13882.76 16779.69 19964.44 25851.77

12256.32 13969.32 15904.98 19223.88 22872.54 29617.45

30.00 30.00 30.00 35.00 35.00 40.00

866.47 866.47 866.47 1010.88 1010.88 1155.29

nr nr nr nr nr nr

13122.78 14835.79 16771.44 20234.76 23883.42 30772.73

295.84

338.94

2.00

57.76

nr

396.70

724.81 73.96 221.88 443.75

830.39 84.73 254.20 508.39

2.00 2.00 2.00 2.00

57.76 57.76 57.76 57.76

nr nr nr nr

888.15 142.50 311.97 566.16

Cast Resin type in ventilated steel encloure, AN – Air Natural including winding temperture indicator with 2 N/O contacts 500kVA 800kVA 1000kVA 1250kVA 1600kVA 2000kVA

11445.60 13314.59 16106.86 17433.85 19777.55 22394.15

13112.81 15254.05 18453.05 19973.33 22658.42 25656.17

40.00 40.00 40.00 45.00 45.00 50.00

1155.29 1155.29 1155.29 1299.70 1299.70 1444.11

nr nr nr nr nr nr

14268.10 16409.34 19608.34 21273.03 23958.12 27100.28

Cast Resin type in ventilated steel enclosure with temperature controlled fans to achieve 40% increase to AN/AF rating. Includes winding temperature indicator with 2 N/O contacts 500/700kVA 800/1120kVA 1000/1400kVA 12501750kVA 1600/2240kVA 2000/2800kVA

12566.98 14622.89 18092.47 18840.06 21284.67 24275.05

14397.54 16752.92 20727.89 21584.38 24385.08 27811.05

42.00 42.00 42.00 47.00 47.00 52.00

1213.05 1213.05 1213.05 1357.46 1357.46 1501.87

nr nr nr nr nr nr

15610.59 17965.98 21940.94 22941.84 25742.54 29312.93

Step down transformers; 11 / 0.415kV, Dyn 11, 50Hz. Complete with lifting lugs, mounting skids, provisions for wheels, undrilled gland plates to air-filled cable boxes, off load tapping facility, including UK delivery

Extra for, Fluid temperature indicator with 2 N/O contacts Winding temperature indicator with 2 N/O contacts Dehydrating Breather Plain Rollers Pressure relief device with 1 N/O contact Step down transformers; 11 / 0.415kV, Dyn 11, 50Hz. Complete with lifting lugs, mounting skids, provisions for wheels, undrilled gland plates to air-filled cable boxes, off load tapping facility, including delivery

496

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION Y60 – CONDUIT AND CABLE TRUNKING Heavy gauge, screwed drawn steel; surface fixed on saddles to backgrounds,with standard pattern boxes and fittings including all fixings and supports (forming holes, conduit entry, draw wires etc. and components for earth continuity are included) Black enamelled 20 mm dia. 25 mm dia. 32 mm dia. 38 mm dia. 50 mm dia.

2.10 3.05 6.23 7.42 11.78

2.41 3.49 7.13 8.51 13.50

0.49 0.56 0.64 0.73 1.04

14.15 16.17 18.48 21.08 30.04

m m m m m

16.56 19.66 25.62 29.59 43.53

1.96 2.56 3.99 6.51 9.74

2.25 2.93 4.57 7.46 11.16

0.49 0.56 0.64 0.73 1.04

14.15 16.17 18.48 21.08 30.04

m m m m m

16.40 19.11 23.06 28.54 41.20

Light gauge 16 mm dia. 20 mm dia. 25 mm dia. 32 mm dia. 38 mm dia. 50 mm dia.

0.64 0.87 1.42 1.87 2.41 2.87

0.74 0.99 1.63 2.15 2.76 3.29

0.27 0.28 0.33 0.38 0.44 0.48

7.80 8.09 9.53 10.98 12.71 13.86

m m m m m m

8.53 9.08 11.16 13.12 15.47 17.15

Heavy gauge 16 mm dia. 20 mm dia. 25 mm dia. 32 mm dia. 38 mm dia. 50 mm dia.

1.02 1.16 1.58 2.50 3.32 5.50

1.17 1.33 1.81 2.86 3.80 6.30

0.27 0.28 0.33 0.38 0.44 0.48

7.80 8.09 9.53 10.98 12.71 13.86

m m m m m m

8.97 9.42 11.34 13.84 16.51 20.16

7.94 8.44 12.51 19.38 24.48 85.42

9.10 9.67 14.33 22.20 28.05 97.86

0.46 0.42 0.43 0.51 0.56 0.82

13.29 12.13 12.42 14.73 16.17 23.68

nr nr nr nr nr nr

22.38 21.80 26.75 36.93 44.22 121.55

Galvanised 20 mm dia. 25 mm dia. 32 mm dia. 38 mm dia. 50 mm dia. High impact PVC; surface fixed on saddles to backgrounds; with standard pattern boxes and fittings; including all fixings and supports

Flexible conduits; including adaptors and locknuts (for connections to equipment) Metallic, PVC covered conduit; not exceeding 1m long; including zinc plated mild steel adaptors, lock nuts and earth conductor 16 mm dia. 20 mm dia. 25 mm dia. 32 mm dia. 38 mm dia. 50 mm dia.

Material Costs/Prices for Measured Works – Electrical Installations

497

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

PVC conduit; not exceeding 1m long; including nylon adaptors, lock nuts 16 mm dia. 20 mm dia. 25 mm dia. 32 mm.dia.

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4.71 4.71 5.91 8.56

5.39 5.39 6.77 9.81

0.46 0.48 0.50 0.58

13.29 13.86 14.44 16.75

nr nr nr nr

18.68 19.26 21.21 26.56

3.24 4.19 7.51

3.72 4.80 8.60

0.69 0.71 0.80

19.93 20.51 23.11

nr nr nr

23.65 25.31 31.71

1.04 1.15 1.24 1.32 1.42 1.52 1.64 1.77 2.03 2.11 2.30 2.54 2.86 2.95 3.01 3.25

1.19 1.32 1.42 1.51 1.63 1.75 1.88 2.03 2.32 2.42 2.63 2.91 3.28 3.37 3.45 3.73

0.23 0.23 0.23 0.23 0.25 0.25 0.29 0.30 0.34 0.34 0.34 0.37 0.37 0.39 0.45 0.45

6.64 6.64 6.64 6.64 7.22 7.22 8.38 8.66 9.82 9.82 9.82 10.69 10.69 11.26 13.00 13.00

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

7.83 7.96 8.06 8.15 8.85 8.97 10.25 10.69 12.14 12.24 12.45 13.60 13.97 14.64 16.44 16.73

3.35 5.80 16.16 7.48 9.15 6.95 10.95 12.53 11.95 15.20 19.00 22.60

3.84 6.64 18.51 8.57 10.48 7.96 12.54 14.36 13.69 17.41 21.77 25.89

0.39 0.44 0.47 0.50 0.57 0.62 0.78 0.78 0.86 0.88 0.84 0.99

11.26 12.71 13.57 14.44 16.46 17.91 22.53 22.53 24.84 25.42 24.26 28.59

m m m m m m m m m m m m

15.10 19.35 32.09 23.01 26.95 25.87 35.07 36.88 38.53 42.83 46.03 54.49

PVC adaptable boxes; fixed to backgrounds; including all supports and fixings (cutting and connecting conduit to boxes is included) Square pattern 75 x 75 x 53 mm 100 x 100 x 75 mm 150 x 150 x 75 mm Terminal strips to be fixed in metal or polythene adaptable boxes) 20 Amp high density polythene 2 way 3 way 4 way 5 way 6 way 7 way 8 way 9 way 10 way 11 way 12 way 13 way 14 way 15 way 16 way 18 way TRUNKING Galvanised steel trunking; fixed to backgrounds; jointed with standard connectors (including plates for air gap between trunking and background); earth continuity straps included Single compartment 50 x 50 mm 75 x 50 mm 75 x 75 mm 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm 225 x 75 mm 225 x 150 mm 225 x 225 mm

498

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CONDUIT AND CABLE TRUNKING – cont'd TRUNKING – cont'd Galvanised steel trunking – cont'd Single compartment – cont'd 300 x 75 mm 300 x 100 mm 300 x 150 mm 300 x 225 mm 300 x 300 mm

13.78 11.82 16.06 18.60 24.06

15.79 13.54 18.40 21.31 27.56

0.96 0.99 0.99 1.09 1.16

27.73 28.59 28.59 31.48 33.50

m m m m m

43.51 42.14 46.99 52.79 61.07

Double compartment 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm

8.76 8.84 9.97 9.98 11.45 14.19

10.03 10.13 11.42 11.44 13.12 16.26

0.54 0.62 0.66 0.70 0.83 0.92

15.60 17.91 19.06 20.22 23.97 26.57

m m m m m m

25.63 28.04 30.48 31.66 37.09 42.83

Triple compartment 150 x 50 mm 150 x 100 mm 150 x 150 mm

13.18 10.75 16.58

15.10 12.32 19.00

0.79 0.78 1.01

22.82 22.53 29.17

m m m

37.92 34.84 48.17

0.86 1.16 1.16 1.20 1.30 1.27 1.42 1.55 1.59 1.65 2.38 2.83 1.67 2.01 2.10 2.31 2.52

0.99 1.33 1.33 1.37 1.49 1.46 1.63 1.78 1.82 1.89 2.73 3.24 1.91 2.30 2.41 2.65 2.89

0.19 0.20 0.21 0.31 0.27 0.27 0.28 0.30 0.32 0.35 0.37 0.38 0.42 0.42 0.43 0.45 0.48

5.49 5.78 6.07 8.95 7.80 7.80 8.09 8.66 9.24 10.11 10.69 10.98 12.13 12.13 12.42 13.00 13.86

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

6.47 7.11 7.39 10.33 9.29 9.25 9.71 10.44 11.06 12.00 13.41 14.22 14.04 14.43 14.83 15.64 16.75

Galvanised steel trunking fittings; cutting and jointing trunking to fittings is included Stop end 50 x 50 mm 75 x 50 mm 75 x 75 mm 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm 225 x 75 mm 225 x 150 mm 225 x 225 mm 300 x 75 mm 300 x 100 mm 300 x 150 mm 300 x 225 mm 300 x 300 mm

Material Costs/Prices for Measured Works – Electrical Installations

499

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Flanged connector 50 x 50 mm 75 x 50 mm 75 x 75 mm 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm 225 x 75 mm 225 x 150 mm 225 x 225 mm 300 x 75 mm 300 x 100 mm 300 x 150 mm 300 x 225 mm 300 x 300 mm

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

1.16 1.78 1.72 1.85 1.91 1.85 1.86 2.00 2.02 1.65 2.38 2.86 1.67 2.01 2.10 2.31 2.52

1.33 2.04 1.97 2.12 2.19 2.12 2.13 2.29 2.31 1.89 2.73 3.28 1.91 2.30 2.41 2.65 2.89

0.19 0.20 0.21 0.26 0.27 0.27 0.28 0.30 0.32 0.35 0.37 0.38 0.42 0.42 0.43 0.45 0.48

5.49 5.78 6.07 7.51 7.80 7.80 8.09 8.66 9.24 10.11 10.69 10.98 12.13 12.13 12.42 13.00 13.86

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

6.82 7.82 8.04 9.63 9.99 9.92 10.22 10.96 11.56 12.00 13.41 14.25 14.04 14.43 14.83 15.64 16.75

Bends 90°; single compartment 50 x 50 mm 75 x 50 mm 75 x 75 mm 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm 225 x 75 mm 225 x 150 mm 225 x 225 mm 300 x 75 mm 300 x 100 mm 300 x 150 mm 300 x 225 mm 300 x 300 mm

5.87 6.08 5.87 6.99 6.64 6.37 7.89 10.75 9.42 14.54 18.64 21.47 14.25 14.56 15.38 16.56 17.75

6.72 6.97 6.72 8.01 7.61 7.30 9.04 12.32 10.79 16.66 21.36 24.60 16.33 16.68 17.62 18.97 20.34

0.42 0.45 0.48 0.53 0.56 0.58 0.64 0.91 0.89 0.76 0.82 0.83 0.85 0.90 0.96 0.98 1.06

12.13 13.00 13.86 15.31 16.17 16.75 18.48 26.28 25.71 21.95 23.68 23.97 24.55 25.99 27.73 28.30 30.62

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

18.86 19.96 20.59 23.32 23.78 24.05 27.52 38.60 36.50 38.61 45.04 48.57 40.88 42.67 45.35 47.28 50.95

Bends 90°; double compartment 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm

6.48 8.56 8.66 10.11 10.19 16.09

7.42 9.80 9.92 11.58 11.67 18.44

0.53 0.56 0.58 0.65 0.69 0.73

15.31 16.17 16.75 18.77 19.93 21.08

nr nr nr nr nr nr

22.73 25.98 26.67 30.35 31.60 39.52

Bends 90°; triple compartment 150 x 50 mm 150 x 100 mm 150 x 150 mm

9.17 14.98 21.67

10.51 17.16 24.83

0.68 0.73 0.77

19.64 21.08 22.24

nr nr nr

30.15 38.25 47.07

500

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CONDUIT AND CABLE TRUNKING – cont'd TRUNKING – cont'd Galvanised steel trunking fittings – cont'd Tees; single compartment 50 x 50 mm 75 x 50 mm 75 x 75 mm 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm 225 x 75 mm 225 x 150 mm 225 x 225 mm 300 x 75 mm 300 x 100 mm 300 x 150 mm 300 x 225 mm 300 x 300mm

5.72 6.75 6.59 7.91 8.02 7.62 11.21 11.33 10.89 19.57 26.45 30.27 20.14 21.05 21.90 23.78 25.67

6.55 7.73 7.55 9.06 9.19 8.73 12.84 12.98 12.48 22.42 30.30 34.68 23.07 24.12 25.09 27.24 29.41

0.56 0.57 0.60 0.65 0.71 0.72 0.82 0.84 0.91 0.94 1.01 1.02 1.07 1.07 1.14 1.19 1.26

16.17 16.46 17.33 18.77 20.51 20.80 23.68 24.26 26.28 27.15 29.17 29.46 30.90 30.90 32.93 34.37 36.39

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

22.73 24.20 24.88 27.84 29.69 29.53 36.53 37.24 38.76 49.57 59.47 64.14 53.98 55.02 58.02 61.61 65.80

Tees; double compartment 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm

9.84 10.44 11.43 11.88 12.44 13.95

11.27 11.96 13.10 13.61 14.25 15.98

0.65 0.71 0.72 0.82 0.85 0.91

18.77 20.51 20.80 23.68 24.55 26.28

nr nr nr nr nr nr

30.05 32.47 33.90 37.29 38.80 42.26

Tees; triple compartment 150 x 50 mm 150 x 100 mm 150 x 150 mm

12.80 15.96 20.68

14.66 18.28 23.69

0.87 0.89 0.96

25.13 25.71 27.73

nr nr nr

39.79 43.99 51.42

Crossovers; single compartment 50 x 50 mm 75 x 50 mm 75 x 75 mm 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm 225 x 75 mm 225 x 150 mm 225 x 225 mm

7.41 10.76 10.28 12.70 12.80 12.21 14.74 15.39 14.74 27.02 35.12 40.14

8.49 12.33 11.78 14.55 14.66 13.99 16.89 17.63 16.89 30.96 40.24 45.99

0.65 0.66 0.69 0.74 0.80 0.81 0.91 0.94 0.99 1.01 1.08 1.09

18.77 19.06 19.93 21.37 23.11 23.39 26.28 27.15 28.59 29.17 31.19 31.48

nr nr nr nr nr nr nr nr nr nr nr nr

27.26 31.39 31.71 35.92 37.77 37.38 43.17 44.78 45.48 60.13 71.43 77.47

Material Costs/Prices for Measured Works – Electrical Installations

501

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

300 300 300 300 300

Net Price £

x x x x x

75 mm 100 mm 150 mm 225 mm 300mm

Material £

Labour hours

Labour £

Unit

Total rate £

26.93 27.72 28.57 30.94 33.37

30.85 31.76 32.73 35.45 38.23

1.14 1.16 1.19 1.21 1.29

32.93 33.50 34.37 34.95 37.26

nr nr nr nr nr

63.78 65.26 67.10 70.39 75.49

Crossovers; double compartment 100 x 50 mm 100 x 75 mm 100 x 100 mm 150 x 50 mm 150 x 100 mm 150 x 150 mm

12.59 12.46 13.64 14.78 14.82 23.20

14.42 14.28 15.63 16.94 16.97 26.59

0.74 0.80 0.81 0.86 0.94 1.00

21.37 23.11 23.39 24.84 27.15 28.88

nr nr nr nr nr nr

35.80 37.38 39.02 41.78 44.12 55.47

Crossovers; triple compartment 150 x 50 mm 150 x 100 mm 150 x 150 mm

13.76 15.64 24.52

15.76 17.92 28.09

0.97 0.99 1.06

28.02 28.59 30.62

nr nr nr

43.77 46.52 58.70

Triple compartment 350 x 60mm

42.12

48.26

1.32

38.12

m

86.38

Four compartment 350 x 60mm

43.86

50.25

1.32

38.12

m

88.38

Stop end; triple compartment 350 x 60mm

4.42

5.06

0.53

15.31

nr

20.37

Stop end; four compartment 350 x 60mm

4.42

5.06

0.53

15.31

nr

20.37

Rising bend; standard; triple compartment 350 x 60mm

36.44

41.75

1.30

37.55

nr

79.30

Rising bend; standard; four compartment 350 x 60mm

38.17

43.73

1.30

37.55

nr

81.28

Rising bend; skirting; triple compartment 350 x 60mm

71.48

81.89

1.33

38.41

nr

120.30

Rising bend; skirting; four compartment 350 x 60mm

81.13

92.95

1.33

38.41

nr

131.36

Junction box; triple compartment 350 x 60mm

47.51

54.43

1.16

33.50

nr

87.93

Junction box; four compartment 350 x 60mm

49.41

56.61

1.16

33.50

nr

90.11

Galvanised steel flush floor trunking; fixed to backgrounds; supports and fixings; standard coupling joints; earth continuity straps included

Galvanised steel flush floor trunking; fittings (cutting and jointing trunking to fittings is included)

502

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CONDUIT AND CABLE TRUNKING – cont'd TRUNKING – cont'd Galvanised steel flush floor trunking – cont'd Body coupler (pair) 3 and 4 Compartment

2.45

2.81

0.16

4.62

nr

7.43

Service outlet module comprising flat lid with flanged carpet trim; twin 13 A outlet and drilled plate for mounting 2 telephone outlets; one blank plate; triple compartment 3 Compartment

58.93

67.51

0.47

13.57

nr

81.09

Service outlet module comprising flat lid with flanged carpet trim; twin 13 A outlet and drilled plate for mounting 2 telephone outlets; two blank plates; four compartment 4 Compartment

65.64

75.20

0.47

13.57

nr

88.77

10.14 11.00 12.46 14.11 15.47 16.35 14.18 25.28 30.43 31.13

11.62 12.60 14.28 16.16 17.73 18.73 16.24 28.96 34.86 35.66

0.27 0.28 0.29 0.34 0.37 0.37 0.41 0.44 0.44 0.48

7.80 8.09 8.38 9.82 10.69 10.69 11.84 12.71 12.71 13.86

m m m m m m m m m m

19.41 20.68 22.66 25.98 28.41 29.42 28.08 41.67 47.57 49.53

16.62 18.43 20.00 26.66 33.62 29.73 38.10 45.71 70.95

19.04 21.12 22.92 30.55 38.52 34.06 43.65 52.36 81.29

0.29 0.30 0.31 0.35 0.36 0.40 0.45 0.46 0.47

8.38 8.66 8.95 10.11 10.40 11.55 13.00 13.29 13.57

nr nr nr nr nr nr nr nr nr

27.41 29.78 31.87 40.66 48.91 45.62 56.64 65.65 94.86

Single compartment PVC trunking; grey finish; clip on lid; fixed to backgrounds; including supports and fixings (standard coupling joints) 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 50mm 150 x 75mm 150 x 100mm 150 x 150mm Single compartment PVC trunking; fittings (cutting and jointing trunking to fittings is included) Crossover 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 75mm 150 x 100mm 150 x 150mm

Material Costs/Prices for Measured Works – Electrical Installations

503

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Stop end 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 75mm 150 x 100mm 150 x 150mm

0.69 1.30 0.99 1.77 2.77 2.78 7.23 8.96 9.13

0.79 1.48 1.13 2.03 3.18 3.19 8.29 10.26 10.46

0.12 0.12 0.13 0.16 0.16 0.18 0.20 0.21 0.22

3.47 3.47 3.75 4.62 4.62 5.20 5.78 6.07 6.35

nr nr nr nr nr nr nr nr nr

4.26 4.95 4.89 6.65 7.80 8.39 14.06 16.33 16.81

Flanged coupling 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 75mm 150 x 100mm 150 x 150mm

4.17 4.76 5.71 6.44 7.29 7.77 8.22 8.66 9.08

4.78 5.46 6.54 7.37 8.36 8.90 9.42 9.92 10.40

0.32 0.33 0.34 0.44 0.45 0.46 0.57 0.57 0.59

9.24 9.53 9.82 12.71 13.00 13.29 16.46 16.46 17.04

nr nr nr nr nr nr nr nr nr

14.02 14.99 16.36 20.08 21.35 22.19 25.88 26.38 27.44

Internal coupling 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm

1.47 1.74 1.73 2.34 2.63 2.90

1.68 2.00 1.99 2.68 3.01 3.32

0.07 0.07 0.07 0.08 0.08 0.08

2.02 2.02 2.02 2.31 2.31 2.31

nr nr nr nr nr nr

3.70 4.02 4.01 4.99 5.33 5.63

External coupling 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 75mm 150 x 100mm 150 x 150mm

1.61 1.92 1.91 2.56 2.92 3.18 3.64 3.79 3.93

1.85 2.20 2.19 2.93 3.34 3.65 4.17 4.35 4.50

0.09 0.09 0.09 0.10 0.10 0.10 0.11 0.11 0.11

2.60 2.60 2.60 2.89 2.89 2.89 3.18 3.18 3.18

nr nr nr nr nr nr nr nr nr

4.45 4.80 4.78 5.82 6.23 6.53 7.35 7.52 7.68

Angle; flat cover 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 75mm 150 x 100mm 150 x 150mm

5.90 7.86 9.05 13.50 20.56 18.75 25.57 30.41 46.08

6.75 9.01 10.37 15.47 23.56 21.48 29.30 34.84 52.80

0.18 0.19 0.20 0.23 0.26 0.26 0.30 0.33 0.34

5.20 5.49 5.78 6.64 7.51 7.51 8.66 9.53 9.82

nr nr nr nr nr nr nr nr nr

11.95 14.50 16.14 22.11 31.07 28.99 37.96 44.37 62.62

504

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CONDUIT AND CABLE TRUNKING – cont'd TRUNKING – cont'd Single compartment PVC trunking – cont'd Angle; internal or external cover 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 75mm 150 x 100mm 150 x 150mm

7.17 9.89 12.70 13.68 22.01 22.10 27.02 31.85 44.74

8.22 11.34 14.55 15.67 25.22 25.32 30.96 36.49 51.25

0.18 0.19 0.20 0.23 0.26 0.26 0.30 0.33 0.34

5.20 5.49 5.78 6.64 7.51 7.51 8.66 9.53 9.82

nr nr nr nr nr nr nr nr nr

13.41 16.82 20.33 22.31 32.73 32.83 39.62 46.03 61.07

Tee; flat cover 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 75mm 150 x 100mm 150 x 150mm

4.94 7.53 7.75 16.72 17.77 23.18 30.66 39.34 53.50

5.66 8.62 8.88 19.15 20.36 26.56 35.13 45.07 61.29

0.24 0.25 0.26 0.32 0.33 0.34 0.41 0.42 0.44

6.93 7.22 7.51 9.24 9.53 9.82 11.84 12.13 12.71

nr nr nr nr nr nr nr nr nr

12.59 15.84 16.39 28.40 29.89 36.38 46.97 57.20 74.00

Tee; internal or external cover 50 x 50mm 75 x 50mm 75 x 75mm 100 x 50mm 100 x 75mm 100 x 100mm 150 x 75mm 150 x 100mm 150 x 150mm

13.99 15.38 17.09 21.94 25.07 28.13 36.44 43.91 58.62

16.03 17.62 19.57 25.14 28.72 32.23 41.75 50.31 67.16

0.24 0.25 0.26 0.32 0.33 0.34 0.41 0.42 0.44

6.93 7.22 7.51 9.24 9.53 9.82 11.84 12.13 12.71

nr nr nr nr nr nr nr nr nr

22.96 24.84 27.08 34.38 38.25 42.05 53.59 62.44 79.87

Division Strip (1.8m long) 50mm 75mm 100mm

7.59 9.71 12.36

8.69 11.12 14.16

0.07 0.07 0.08

2.02 2.02 2.31

nr nr nr

10.72 13.15 16.47

Material Costs/Prices for Measured Works – Electrical Installations

505

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

PVC miniature trunking; white finish; fixed to backgrounds; including supports and fixing; standard coupling joints Single compartment 16 x 16mm 25 x 16mm 38 x 16mm 38 x 25mm

1.37 1.67 2.09 2.49

1.57 1.92 2.40 2.85

0.20 0.21 0.24 0.25

5.78 6.07 6.93 7.22

m m m m

7.34 7.98 9.33 10.07

Compartmented 38 x 16mm 38 x 25mm

2.44 2.92

2.79 3.34

0.24 0.25

6.93 7.22

m m

9.72 10.56

Coupling 16 x 16mm 25 x 16mm 38 x 16mm 38 x 25mm

0.42 0.42 0.42 1.00

0.48 0.48 0.48 1.15

0.10 0.10 0.12 0.14

2.89 2.89 3.47 4.04

nr nr nr nr

3.37 3.37 3.94 5.19

Stop end 16 x 16mm 25 x 16mm 38 x 16mm 38 x 25mm

0.42 0.42 0.42 1.00

0.48 0.48 0.48 1.15

0.12 0.12 0.15 0.17

3.47 3.47 4.33 4.91

nr nr nr nr

3.94 3.94 4.81 6.06

Bend; flat, internal or external 16 x 16mm 25 x 16mm 38 x 16mm 38 x 25mm

0.42 0.42 0.42 1.00

0.48 0.48 0.48 1.15

0.18 0.18 0.21 0.23

5.20 5.20 6.07 6.64

nr nr nr nr

5.68 5.68 6.54 7.79

Tee 16 25 38 38

0.71 0.71 0.71 0.99

0.82 0.82 0.82 1.13

0.23 0.19 0.26 0.29

6.64 5.49 7.51 8.38

nr nr nr nr

7.46 6.31 8.33 9.51

22.98

26.33

0.33

9.53

m

35.86

Stop end 90 x 90mm

4.87

5.57

0.09

2.60

nr

8.17

Coupling 90 x 90mm

3.01

3.45

0.09

2.60

nr

6.05

PVC miniature trunking fittings; single compartment; white finish; cutting and jointing trunking to fittings is included

x x x x

16mm 16mm 16mm 25mm

PVC bench trunking; white or grey finish; fixed to backgrounds; including supports and fixings; standard coupling joints Trunking 90 x 90mm PVC bench trunking fittings; white or grey finish; cutting and jointing trunking to fittings is included

506

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CONDUIT AND CABLE TRUNKING – cont'd TRUNKING – cont'd PVC bench trunking fittings – cont'd Internal or external bend 90 x 90mm

16.52

18.93

0.28

8.09

nr

27.02

Socket plate 90 x 90mm – 1 gang 90 x 90mm – 2 gang

0.93 1.12

1.06 1.29

0.10 0.10

2.89 2.89

nr nr

3.95 4.17

11.28 16.23

12.92 18.59

0.22 0.27

6.35 7.80

m m

19.28 26.39

Jointing sleeve 60 x 25mm 90 x 35mm

0.75 1.24

0.86 1.43

0.08 0.10

2.31 2.89

nr nr

3.18 4.31

Duct connector 90 x 35mm

0.58

0.67

0.17

4.91

nr

5.58

Socket reducer 90 x 35mm

1.04

1.19

0.12

3.47

nr

4.66

Vertical access box; 2 compartment Shallow

58.30

66.80

0.37

10.69

nr

77.48

Duct bend; vertical 60 x 25mm 90 x 35mm

11.37 12.84

13.03 14.71

0.27 0.35

7.80 10.11

nr nr

20.83 24.82

Duct bend; horizontal 60 x 25mm 90 x 35mm

13.41 13.61

15.37 15.59

0.30 0.37

8.66 10.69

nr nr

24.03 26.28

PVC underfloor trunking; single compartment; fitted in floor screed; standard coupling joints Trunking 60 x 25mm 90 x 35mm PVC underfloor trunking fittings; single compartment; fitted in floor screed; (cutting and jointing trunking to fittings is included)

Material Costs/Prices for Measured Works – Electrical Installations

507

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Zinc coated steel underfloor ducting; fixed to backgrounds; standard coupling joints; earth continuity straps; (Including supports and fixing, packing shims where required) Double compartment 150 x 25mm

9.17

10.50

0.57

16.46

m

26.97

16.26

18.63

0.93

26.86

m

45.49

Stop end; double compartment 150 x 25mm

2.89

3.31

0.31

8.95

nr

12.26

Stop end; triple compartment 225 x 25mm

3.30

3.78

0.37

10.69

nr

14.46

Rising bend; double compartment; standard trunking 150 x 25mm

18.57

21.28

0.71

20.51

nr

41.78

Rising bend; triple compartment; standard trunking 225 x 25mm

33.38

38.25

0.85

24.55

nr

62.80

Rising bend; double compartment; to skirting 150 x 25

41.35

47.38

0.90

26.00

nr

73.37

48.76

55.87

0.95

27.44

nr

83.30

28.23

32.35

0.64

18.48

nr

50.83

Horizontal bend; triple compartment 225 x 25mm

32.57

37.31

0.77

22.24

nr

59.55

Junction or service outlet boxes; terminal; double compartment 150mm

29.21

33.47

0.91

26.28

nr

59.75

Junction or service outlet boxes; terminal; triple compartment 225mm

33.40

38.27

1.11

32.06

nr

70.33

Junction or service outlet boxes; through or angle; double compartment 150mm

38.81

44.46

0.97

28.02

nr

72.48

Junction or service outlet boxes; through or angle; triple compartment 225mm

43.10

49.38

1.17

33.79

nr

83.17

Triple compartment 225 x 25mm Zinc coated steel underfloor ducting fittings; (cutting and jointing to fittings is included)

Rising bend; triple compartment; to skirting 225 x 25 horizontal bend; double compartment 150 x 25mm

508

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CONDUIT AND CABLE TRUNKING – cont'd TRUNKING – cont'd Zinc coated steel underfloor ducting fittings – cont'd Junction or service outlet boxes; tee; double compartment 150mm

38.81

44.46

1.02

29.46

nr

73.92

Junction or service outlet boxes; tee; triple compartment 225mm

43.10

49.38

1.22

35.24

nr

84.62

Junction or service outlet boxes; cross; double compartment up to 150mm

38.81

44.46

1.03

29.75

nr

74.21

Junction or service outlet boxes; cross;triple compartment 225mm

43.10

49.38

1.23

35.53

nr

84.90

Plates for junction/inspection boxes; double and triple compartment Blank plate Conduit entry plate Trunking entry plate

8.48 10.63 10.63

9.72 12.18 12.18

0.92 0.86 0.86

26.57 24.84 24.84

nr nr nr

36.29 37.02 37.02

Service outlet box comprising flat lid with flanged carpet trim; twin 13A outlet and drilled plate for mounting 2 telephone outlets and terminal blocks; terminal outlet box; double compartment 150 x 25mm trunking

60.52

69.33

1.68

48.52

nr

117.85

Service outlet box comprising flat lid with flanged carpet trim; twin 13A outlet and drilled plate for mounting 2 telephone outlets and terminal blocks; terminal outlet box; triple compartment 225 x 25mm trunking

67.36

77.18

1.93

55.74

nr

132.92

Main carrier/backplate 50 x 170mm

18.01

20.64

2.02

58.34

m

78.98

Extension carrier/backplate 50 x 42mm

10.95

12.55

0.58

16.75

m

29.30

6.39

7.32

0.53

15.31

m

22.62

PVC skirting/dado modular trunking; white (cutting and jointing trunking to fittings and backplates for fixing to walls is included)

Carrier/backplate Including cover seal

Material Costs/Prices for Measured Works – Electrical Installations

509

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Chamfered covers for fixing to backplates 50 x 42mm

3.70

4.24

0.33

9.53

m

13.77

Square covers for fixing to backplates 50 x 42 mm

7.45

8.53

0.33

9.53

m

18.06

Plain covers for fixing to backplates 85 mm

3.70

4.24

0.34

9.82

m

14.06

Retainers-clip to backplates to hold cables For chamfered covers For square-recessed covers For plain covers

1.03 0.89 3.43

1.18 1.02 3.93

0.07 0.07 0.07

2.02 2.02 2.02

m m m

3.20 3.04 5.95

7.19 8.95 10.65 7.19 8.95 10.65

8.24 10.25 12.20 8.24 10.25 12.20

0.51 0.53 0.53 0.56 0.58 0.58

14.73 15.31 15.31 16.17 16.75 16.75

nr nr nr nr nr nr

22.97 25.56 27.51 24.41 27.00 28.95

Clip on end caps 170 x 50 Assy 215 x 50 Assy 254 x 50 Assy

4.31 5.10 5.99

4.94 5.84 6.86

0.11 0.11 0.11

3.18 3.18 3.18

nr nr nr

8.12 9.02 10.04

Outlet box 1 Gang; in horizontal trunking; clip in 2 Gang; in horizontal trunking; clip in 1 Gang; in vertical trunking; clip in

3.85 4.80 3.85

4.41 5.50 4.41

0.34 0.34 0.34

9.82 9.82 9.82

nr nr nr

14.23 15.32 14.23

2.06 1.96 2.24 2.06 3.13 3.68 4.91 6.27 8.32 8.93

2.36 2.25 2.57 2.36 3.59 4.22 5.62 7.19 9.53 10.23

0.69 0.69 0.69 0.71 0.79 0.80 0.80 0.93 0.94 0.99

19.93 19.93 19.93 20.51 22.82 23.11 23.11 26.86 27.15 28.59

nr nr nr nr nr nr nr nr nr nr

22.29 22.18 22.50 22.87 26.41 27.32 28.73 34.05 36.68 38.82

Prepackaged corner assemblies Internal ; for 170 x 50 Assy Internal; for 215 x 50 Assy Internal; for 254 x 50 Assy External; for 170 x 50 Assy External ; for 215 x 50 Assy External ; for 254 x 50 Assy

Sheet steel adaptable boxes; with plain or knockout sides; fixed to backgrounds; including supports and fixings (cutting and connecting conduit to boxes is included.) Square pattern – black 75 x 75 x 37 mm 75 x 75 x 50 mm 75 x 75 x 75 mm 100 x 100 x 50 mm 150 x 150 x 50 mm 150 x 150 x 75 mm 150 x 150 x 100 mm 225 x 225 x 50 mm 225 x 225 x 100 mm 300 x 300 x 100 mm

510

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CONDUIT AND CABLE TRUNKING – cont'd TRUNKING – cont'd Sheet steel adaptable boxes – cont'd Square pattern – galvanised 75 x 75 x 37 mm 75 x 75 x 50 mm 75 x 75 x 75 mm 100 x 100 x 50 mm 150 x 150 x 50 mm 150 x 150 x 75 mm 150 x 150 x 100 mm 225 x 225 x 50 mm 225 x 225 x 100 mm 300 x 300 x 100 mm

2.94 3.07 2.65 3.25 3.78 4.51 5.43 6.97 8.87 14.27

3.37 3.52 3.03 3.72 4.33 5.17 6.22 7.98 10.17 16.34

0.69 0.69 0.70 0.71 0.84 0.80 0.80 0.93 0.94 0.99

19.93 19.93 20.22 20.51 24.26 23.11 23.11 26.86 27.15 28.59

nr nr nr nr nr nr nr nr nr nr

23.30 23.44 23.25 24.23 28.59 28.27 29.32 34.84 37.32 44.94

Rectangular pattern – black 100 x 75 x 50 mm 150 x 75 x 50 mm 150 x 75 x 75 mm 150 x 100 x 75 mm 225 x 75 x 50 mm 225 x 150 x 75 mm 225 x 150 x 100 mm 300 x 150 x 50 mm 300 x 150 x 75 mm 300 x 150 x 100 mm

3.30 3.45 3.75 8.34 7.21 11.52 21.62 21.62 21.62 21.62

3.78 3.95 4.30 9.56 8.26 13.20 24.77 24.77 24.77 24.77

0.69 0.70 0.71 0.71 0.78 0.81 0.81 0.93 0.94 0.96

19.93 20.22 20.51 20.51 22.53 23.39 23.39 26.86 27.15 27.73

nr nr nr nr nr nr nr nr nr nr

23.71 24.17 24.81 30.06 30.79 36.59 48.16 51.63 51.92 52.49

Rectangular pattern – galvanised 100 x 75 x 50 mm 150 x 75 x 50 mm 150 x 75 x 75 mm 150 x 100 x 75 mm 225 x 75 x 50 mm 225 x 150 x 75 mm 225 x 150 x 100 mm 300 x 150 x 50 mm 300 x 150 x 75 mm 300 x 150 x 100 mm

4.97 7.36 9.03 15.04 13.56 19.04 35.94 35.94 35.94 35.94

5.69 8.43 10.34 17.23 15.54 21.82 41.17 41.17 41.17 41.17

0.69 0.70 0.71 0.71 0.89 0.81 0.81 0.93 0.94 0.96

19.93 20.22 20.51 20.51 25.71 23.39 23.39 26.86 27.15 27.73

nr nr nr nr nr nr nr nr nr nr

25.62 28.65 30.85 37.74 41.24 45.21 64.57 68.03 68.32 68.90

Material Costs/Prices for Measured Works – Electrical Installations

511

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Y61 – LV CABLES AND WIRING ARMOURED CABLE Cable; XLPE insulated; PVC sheathed; copper stranded conductors to BS 5467; laid in trench/duct including marker tape (Cable tiles measured elsewhere) 600/1000 Volt grade; single core (aluminium wire armour) 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2 630 mm2 800 mm2 1000 mm2

1.72 1.91 2.58 3.61 4.85 5.77 7.14 8.57 11.06 13.47 17.51 22.47 28.16 36.29 42.02

1.97 2.19 2.95 4.14 5.56 6.61 8.18 9.82 12.67 15.44 20.06 25.75 32.26 41.57 48.14

0.15 0.15 0.17 0.18 0.20 0.22 0.24 0.26 0.30 0.31 0.38 0.44 0.52 0.62 0.65

4.33 4.33 4.91 5.20 5.78 6.35 6.93 7.51 8.66 8.95 10.98 12.71 15.02 17.91 18.77

m m m m m m m m m m m m m m m

6.30 6.52 7.86 9.34 11.34 12.97 15.11 17.33 21.33 24.39 31.04 38.46 47.28 59.48 66.91

600/1000 Volt grade; two core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

0.61 0.70 0.91 1.11 1.49 2.24 2.87 4.53 5.12 7.02 9.44 11.56 14.34 18.27 23.39 31.42 41.56

0.70 0.80 1.04 1.28 1.70 2.56 3.29 5.19 5.86 8.04 10.82 13.24 16.43 20.93 26.80 36.00 47.61

0.06 0.06 0.08 0.08 0.10 0.10 0.15 0.15 0.17 0.18 0.20 0.22 0.24 0.26 0.30 0.31 0.35

1.73 1.73 2.31 2.31 2.89 2.89 4.33 4.33 4.91 5.20 5.78 6.35 6.93 7.51 8.66 8.95 10.11

m m m m m m m m m m m m m m m m m

2.43 2.53 3.35 3.59 4.59 5.45 7.62 9.52 10.77 13.24 16.60 19.60 23.36 28.44 35.46 44.96 57.72

0.67 0.85 1.05 1.35 2.07 2.89 3.91 5.44 7.10 9.72

0.77 0.97 1.20 1.55 2.37 3.31 4.48 6.23 8.13 11.13

0.07 0.07 0.09 0.10 0.11 0.11 0.16 0.16 0.19 0.21

2.02 2.02 2.60 2.89 3.18 3.18 4.62 4.62 5.49 6.07

m m m m m m m m m m

2.79 3.00 3.80 4.44 5.54 6.49 9.10 10.85 13.62 17.20

600/1000 Volt grade; three core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2

512

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd ARMOURED CABLE – cont'd Cable – cont'd 600/1000 Volt grade; three core (galvanised steel wire armour) – cont'd 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

13.38 16.64 20.68 25.48 32.60 41.31 49.06

15.33 19.07 23.69 29.20 37.35 47.33 56.21

0.23 0.24 0.27 0.30 0.33 0.35 0.41

6.64 6.93 7.80 8.66 9.53 10.11 11.84

m m m m m m m

21.97 26.00 31.49 37.86 46.88 57.44 68.05

600/1000 Volt grade; four core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

0.79 0.99 1.22 1.80 2.52 3.64 5.25 6.84 9.07 12.90 17.28 21.70 26.27 32.24 41.68 52.29 54.36

0.91 1.13 1.40 2.06 2.88 4.17 6.02 7.84 10.39 14.78 19.80 24.86 30.09 36.94 47.76 59.91 62.28

0.08 0.09 0.10 0.10 0.12 0.12 0.18 0.19 0.21 0.23 0.26 0.28 0.32 0.35 0.36 0.40 0.45

2.31 2.60 2.89 2.89 3.47 3.47 5.20 5.49 6.07 6.64 7.51 8.09 9.24 10.11 10.40 11.55 13.00

m m m m m m m m m m m m m m m m m

3.22 3.73 4.29 4.95 6.35 7.63 11.22 13.33 16.46 21.43 27.31 32.95 39.33 47.05 58.15 71.46 75.27

600/1000 Volt grade; seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2

1.13 1.57 2.86

1.30 1.80 3.28

0.10 0.10 0.11

2.89 2.89 3.18

m m m

4.18 4.69 6.46

600/1000 Volt grade; twelve core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

1.80 2.69

2.06 3.09

0.11 0.11

3.18 3.18

m m

5.24 6.26

600/1000 Volt grade; nineteen core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

2.71 4.07

3.11 4.66

0.13 0.14

3.75 4.04

m m

6.86 8.71

600/1000 Volt grade; twenty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

3.73 5.20

4.28 5.96

0.14 0.16

4.04 4.62

m m

8.32 10.58

Material Costs/Prices for Measured Works – Electrical Installations

513

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

600/1000 Volt grade; thirty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4.65 6.58

5.33 7.54

0.15 0.17

4.33 4.91

m m

9.66 12.45

600/1000 Volt grade; single core (aluminium wire armour) 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2 630 mm2 800 mm2 1000 mm2

2.59 2.82 2.86 3.77 5.05 5.97 7.34 8.75 11.46 13.86 20.23 25.49 33.15 41.22 46.09

2.97 3.23 3.27 4.31 5.78 6.84 8.40 10.02 13.13 15.88 23.18 29.20 37.98 47.22 52.80

0.35 0.36 0.37 0.39 0.42 0.47 0.51 0.59 0.68 0.74 0.88 0.88 1.05 1.33 1.40

10.11 10.40 10.69 11.26 12.13 13.57 14.73 17.04 19.64 21.37 25.42 25.42 30.33 38.41 40.44

m m m m m m m m m m m m m m m

13.08 13.63 13.96 15.58 17.91 20.41 23.13 27.06 32.77 37.26 48.59 54.62 68.31 85.63 93.24

600/1000 Volt grade; two core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

0.77 0.88 1.11 1.30 1.68 2.43 2.11 4.72 5.32 7.28 9.50 11.67 14.45 18.41 22.90 32.07 39.92

0.88 1.00 1.28 1.49 1.93 2.79 2.42 5.40 6.10 8.34 10.89 13.37 16.55 21.09 26.23 36.74 45.74

0.20 0.20 0.21 0.22 0.24 0.25 0.35 0.36 0.37 0.39 0.42 0.47 0.51 0.59 0.68 0.74 0.88

5.78 5.78 6.07 6.35 6.93 7.22 10.11 10.40 10.69 11.26 12.13 13.57 14.73 17.04 19.64 21.37 25.42

m m m m m m m m m m m m m m m m m

6.65 6.78 7.34 7.84 8.86 10.01 12.52 15.80 16.78 19.60 23.02 26.95 31.28 38.13 45.87 58.11 71.16

0.82 0.97 1.24 1.55 2.25 3.09 4.33 5.63 7.35

0.94 1.11 1.42 1.77 2.58 3.53 4.97 16.38 8.42

0.20 0.21 0.22 0.22 0.25 0.26 0.37 0.39 0.40

5.78 6.07 6.35 6.35 7.22 7.51 10.69 11.26 11.55

m m m m m m m m m

6.72 7.18 7.78 8.13 9.80 11.04 15.65 27.64 19.98

Cable; XLPE insulated; PVC sheathed copper stranded conductors to BS 5467; clipped direct to backgrounds including cleat

600/1000 Volt grade; three core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2 25 mm2 35 mm2 50 mm2

514

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd ARMOURED CABLE – cont'd Cable – cont'd 600/1000 Volt grade; three core (galvanised steel wire armour) – cont'd 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

9.82 13.49 16.75 20.82 25.63 34.04 42.85 50.87

11.25 15.45 34.64 23.85 29.36 39.00 49.09 58.28

0.42 0.45 0.52 0.55 0.63 0.71 0.78 0.87

12.13 13.00 15.02 15.89 18.20 20.51 22.53 25.13

m m m m m m m m

23.38 28.45 49.66 39.73 47.56 59.51 71.62 83.41

600/1000 Volt grade; four core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

0.94 1.17 1.43 1.99 2.72 3.83 5.45 7.10 9.32 13.01 17.43 21.84 27.57 33.69 43.62 54.73 56.77

1.07 1.34 1.64 2.28 3.12 4.38 6.24 8.13 10.67 14.91 19.96 25.02 31.58 38.59 49.98 62.70 65.04

0.21 0.22 0.22 0.23 0.26 0.26 0.39 0.40 0.41 0.45 0.50 0.54 0.60 0.67 0.75 0.83 0.91

6.07 6.35 6.35 6.64 7.51 7.51 11.26 11.55 11.84 13.00 14.44 15.60 17.33 19.35 21.66 23.97 26.28

m m m m m m m m m m m m m m m m m

7.14 7.70 7.99 8.92 10.63 11.89 17.51 19.68 22.51 27.91 34.40 40.61 48.91 57.94 71.64 86.68 91.32

600/1000 Volt grade; seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4.0 mm2

1.32 1.81 3.26

1.51 2.07 3.74

0.20 0.20 0.23

5.78 5.78 6.64

m m m

7.29 7.85 10.38

600/1000 Volt grade; twelve core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

1.92 2.88

5.52 3.30

0.23 0.24

6.64 6.93

m m

12.16 10.23

600/1000 Volt grade; nineteen core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

2.90 4.27

3.32 4.89

0.26 0.28

7.51 8.09

m m

10.83 12.98

600/1000 Volt grade; twenty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

3.92 5.45

4.49 6.24

0.29 0.30

8.38 8.66

m m

12.87 14.91

Material Costs/Prices for Measured Works – Electrical Installations

515

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

600/1000 Volt grade; thirty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4.90 6.83

5.61 7.83

0.32 0.33

9.24 9.53

m m

14.85 17.36

600/1000 Volt grade; single core (aluminium wire armour) 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2 630 mm2 800 mm2 1000 mm2

5.20 5.20 5.20 6.17 6.22 6.24 8.88 9.03 13.80 13.95 20.09 22.30 25.13 42.86 51.72

5.96 5.96 5.96 7.07 7.13 7.15 10.17 10.35 15.81 15.98 23.02 25.55 28.79 49.10 59.25

1.70 1.79 2.06 2.12 2.39 2.47 2.73 3.05 3.45 3.84 4.21 5.70 6.20 7.50 10.00

49.10 51.70 59.50 61.23 69.03 71.34 78.85 88.09 99.64 110.91 121.59 164.63 179.07 216.62 288.82

nr nr nr nr nr nr nr nr nr nr nr m m m m

55.06 57.66 65.45 68.30 76.15 78.49 89.02 98.44 115.45 126.89 144.61 190.18 207.86 265.72 348.08

600/1000 Volt grade; two core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

4.80 4.80 4.83 4.93 5.25 5.30 6.03 5.95 8.82 9.04 13.43 13.87 19.65 20.00 21.30 28.84 45.68

5.50 5.50 5.54 5.64 6.02 6.08 6.91 6.81 10.11 10.35 15.39 15.89 22.51 22.92 24.40 33.04 52.33

0.58 0.58 0.58 0.67 1.00 1.11 1.70 1.79 2.06 2.12 2.39 2.47 2.73 3.05 3.45 3.84 4.21

16.75 16.75 16.75 19.35 28.88 32.06 49.10 51.70 59.50 61.23 69.03 71.34 78.85 88.09 99.64 110.91 121.59

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

22.26 22.26 22.29 25.00 34.90 38.14 56.01 58.51 69.61 71.58 84.42 87.23 101.36 111.01 124.04 143.94 173.92

4.98 4.98 4.83 5.47 6.12 6.28 8.95 9.07

5.70 5.70 5.54 6.26 7.01 7.20 10.25 10.39

0.62 0.62 0.62 0.71 1.06 1.19 1.81 1.99

17.91 17.91 17.91 20.51 30.62 34.37 52.28 57.48

nr nr nr nr nr nr nr nr

23.61 23.61 23.45 26.77 37.63 41.57 62.53 67.86

Cable termination; brass weatherproof gland with inner and outer seal, shroud, brass locknut and earth ring (including drilling and cutting mild steel gland plate)

600/1000 Volt grade; three core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2

516

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd ARMOURED CABLE – cont'd Cable termination – cont'd 600/1000 Volt grade; three core (galvanised steel wire armour) – cont'd 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

9.15 13.66 13.96 14.63 20.54 21.05 30.19 30.70 41.22

10.48 15.65 16.00 16.76 23.54 24.12 34.59 35.17 47.22

2.23 2.40 2.63 2.83 3.22 3.44 3.83 4.28 5.00

64.41 69.32 75.96 81.74 93.00 99.35 110.62 123.62 144.41

nr nr nr nr nr nr nr nr nr

74.89 84.96 91.96 98.49 116.54 123.47 145.21 158.79 191.63

600/1000 Volt grade; four core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

5.13 5.13 5.18 6.33 6.33 6.46 9.21 9.37 13.67 14.09 20.02 20.90 21.44 29.29 31.91 42.47 45.41

5.88 5.88 5.94 7.26 7.26 7.40 10.55 10.74 15.66 16.14 22.94 23.94 24.56 33.56 36.55 48.66 52.03

0.67 0.67 0.71 0.76 1.14 1.29 1.99 2.16 2.49 2.65 2.98 3.15 3.50 3.72 4.33 4.86 5.46

19.35 19.35 20.51 21.95 32.93 37.26 57.48 62.39 71.92 76.54 86.07 90.98 101.09 107.44 125.06 140.37 157.70

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

25.23 25.23 26.44 29.21 40.18 44.66 68.03 73.12 87.58 92.68 109.01 114.92 125.65 141.00 161.61 189.03 209.72

600/1000 Volt grade; seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2

5.60 5.60 2.58

6.42 6.42 2.96

0.81 0.85 0.93

23.39 24.55 26.86

nr nr nr

29.81 30.97 29.82

600/1000 Volt grade; twelve core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

6.72 7.39

7.70 8.47

1.14 1.13

32.93 32.64

nr nr

40.63 41.11

600/1000 Volt grade; nineteen core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

8.50 8.50

9.73 9.73

1.54 1.54

44.48 44.48

nr nr

54.21 54.21

Material Costs/Prices for Measured Works – Electrical Installations

517

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

600/1000 Volt grade; twenty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

9.73 12.35

11.15 14.15

1.94 2.31

56.03 66.72

nr nr

67.18 80.87

600/1000 Volt grade; thirty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

13.96 13.96

16.00 16.00

2.53 2.87

73.07 82.89

nr nr

89.07 98.89

600/1000 Volt grade; single core (aluminium wire armour) 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2 630 mm2 800 mm2 1000 mm2

2.73 3.41 4.63 5.50 6.80 8.17 10.54 12.84 16.68 21.41 26.82 35.16 44.87

3.13 3.90 5.31 6.30 7.79 9.36 12.08 14.70 19.11 24.53 30.72 40.29 51.41

0.17 0.18 0.20 0.22 0.24 0.26 0.30 0.31 0.35 0.44 0.52 0.62 0.65

4.91 5.20 5.78 6.35 6.93 7.51 8.66 8.95 10.11 12.71 15.02 17.91 18.77

m m m m m m m m m m m m m

8.04 9.10 11.08 12.65 14.72 16.87 20.74 23.66 29.22 37.24 45.74 58.19 70.18

600/1000 Volt grade; two core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

0.58 0.69 0.88 1.06 1.43 2.13 2.74 4.32 3.07 6.70 8.99 11.02 13.66 17.40 22.28 29.93 39.58

0.66 0.79 1.00 1.22 1.64 2.44 3.14 4.95 3.52 7.67 10.30 12.62 15.65 19.93 25.52 34.29 45.35

0.06 0.06 0.08 0.08 0.10 0.10 0.15 0.15 0.17 0.18 0.20 0.22 0.24 0.26 0.30 0.31 0.35

1.73 1.73 2.31 2.31 2.89 2.89 4.33 4.33 4.91 5.20 5.78 6.35 6.93 7.51 8.66 8.95 10.11

m m m m m m m m m m m m m m m m m

2.40 2.52 3.31 3.53 4.52 5.33 7.47 9.28 8.43 12.87 16.08 18.97 22.58 27.44 34.19 43.24 55.46

0.65 0.81 1.00 1.29 1.97

0.74 0.93 1.15 1.48 2.26

0.07 0.07 0.09 0.10 0.11

2.02 2.02 2.60 2.89 3.18

m m m m m

2.76 2.95 3.75 4.37 5.44

Cable; XLPE insulated; LSOH sheathed (LSF) ; copper stranded conductors to BS 6724; laid in trench/duct including marker tape (cable tiles measured elsewhere)

600/1000 Volt grade; three core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2

518

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd ARMOURED CABLE – cont'd Cable – cont'd 600/1000 Volt grade; three core (galvanised steel wire armour) – cont'd 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

2.75 3.73 5.18 6.76 9.26 12.74 15.85 19.70 24.28 31.05 39.35 46.73

3.16 4.28 5.94 7.74 10.60 14.60 18.16 22.57 27.81 35.57 45.08 53.54

0.11 0.16 0.16 0.19 0.21 0.23 0.24 0.27 0.30 0.33 0.35 0.41

3.18 4.62 4.62 5.49 6.07 6.64 6.93 7.80 8.66 9.53 10.11 11.84

m m m m m m m m m m m m

6.33 8.90 10.56 13.23 16.67 21.24 25.09 30.37 36.48 45.10 55.19 65.38

600/1000 Volt grade; four core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

0.76 0.94 1.17 1.72 2.40 3.47 5.01 6.52 8.64 12.30 16.46 20.67 25.02 30.71 39.70 49.81 95.00

0.87 1.07 1.34 1.97 2.75 3.97 5.75 7.47 9.89 14.09 18.86 23.68 28.67 35.18 45.49 57.07 108.84

0.08 0.09 0.10 0.10 0.12 0.12 0.18 0.19 0.21 0.23 0.26 0.28 0.32 0.35 0.36 0.40 0.45

2.31 2.60 2.89 2.89 3.47 3.47 5.20 5.49 6.07 6.64 7.51 8.09 9.24 10.11 10.40 11.55 13.00

m m m m m m m m m m m m m m m m m

3.18 3.67 4.23 4.86 6.21 7.44 10.94 12.96 15.96 20.73 26.37 31.77 37.91 45.29 55.88 68.62 121.84

600/1000 Volt grade; seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2

1.08 1.50 2.73

1.24 1.72 3.13

0.10 0.10 0.11

2.89 2.89 3.18

m m m

4.12 4.61 6.30

600/1000 Volt grade; twelve core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

1.72 2.57

1.97 2.94

0.11 0.11

3.18 3.18

m m

5.14 6.12

600/1000 Volt grade; nineteen core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

2.58 3.88

2.96 4.45

0.13 0.14

3.75 4.04

m m

6.72 8.49

Material Costs/Prices for Measured Works – Electrical Installations

519

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

600/1000 Volt grade; twenty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

3.55 4.96

4.07 5.68

0.14 0.16

4.04 4.62

m m

8.11 10.30

600/1000 Volt grade; thirty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

4.43 6.26

5.07 7.18

0.15 0.17

4.33 4.91

m m

9.41 12.09

600/1000 Volt grade; single core (aluminium wire armour) 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2 630 mm2 800 mm2 1000 mm2

2.98 3.60 4.81 5.69 7.00 8.34 10.91 13.21 19.27 24.28 31.58 39.26 43.89

3.41 4.12 5.51 6.51 8.01 9.55 12.50 15.13 22.08 27.82 36.18 44.98 50.29

0.37 0.39 0.42 0.47 0.51 0.59 0.68 0.74 0.81 0.88 1.05 1.33 1.40

10.69 11.26 12.13 13.57 14.73 17.04 19.64 21.37 23.39 25.42 30.33 38.41 40.44

m m m m m m m m m m m m m

14.09 15.38 17.64 20.09 22.74 26.59 32.14 36.51 45.47 53.24 66.50 83.39 90.72

600/1000 Volt grade; two core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

0.73 0.83 1.06 1.25 1.61 2.32 2.92 4.50 5.07 6.93 9.06 11.12 13.77 17.54 21.82 30.55 38.03

0.84 0.95 1.22 1.43 1.84 2.66 3.34 5.16 5.81 7.94 10.38 12.74 15.78 20.09 25.00 35.00 43.57

0.20 0.20 0.21 0.22 0.24 0.25 0.35 0.36 0.37 0.39 0.42 0.47 0.51 0.59 0.68 0.74 0.81

5.78 5.78 6.07 6.35 6.93 7.22 10.11 10.40 10.69 11.26 12.13 13.57 14.73 17.04 19.64 21.37 23.39

m m m m m m m m m m m m m m m m m

6.61 6.73 7.28 7.79 8.77 9.88 13.45 15.56 16.50 19.20 22.51 26.31 30.51 37.13 44.64 56.37 66.96

0.79 0.93 1.18 1.47 2.16 2.94

0.91 1.06 1.35 1.68 2.47 3.37

0.20 0.21 0.22 0.22 0.25 0.26

5.78 6.07 6.35 6.35 7.22 7.51

m m m m m m

6.68 7.13 7.71 8.04 9.69 10.88

Cable; XLPE insulated; LSOH sheathed (LSF) copper stranded conductors to BS 6724; clipped direct to backgrounds including cleat

600/1000 Volt grade; three core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2

520

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd ARMOURED CABLE – cont'd Cable – cont'd 600/1000 Volt grade; three core (galvanised steel wire armour) – cont'd 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

4.14 5.36 7.00 9.32 12.85 15.95 19.83 24.41 32.43 40.81 48.45

4.74 6.14 8.02 10.68 14.72 18.28 22.72 27.97 37.15 46.75 55.51

0.37 0.39 0.40 0.42 0.45 0.52 0.55 0.63 0.71 0.78 0.87

10.69 11.26 11.55 12.13 13.00 15.02 15.89 18.20 20.51 22.53 25.13

m m m m m m m m m m m

15.43 17.41 19.58 22.81 27.72 33.30 38.60 46.16 57.66 69.28 80.63

600/1000 Volt grade; four core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

0.90 1.12 1.36 1.90 2.59 3.65 5.19 6.76 8.87 12.39 16.60 20.80 26.26 32.09 41.55 52.13 97.74

1.03 1.29 1.56 2.18 2.97 4.18 5.95 7.74 10.17 14.20 19.02 23.83 30.08 36.76 47.60 59.72 111.98

0.21 0.22 0.22 0.23 0.26 0.26 0.39 0.40 0.41 0.45 0.50 0.54 0.60 0.67 0.75 0.83 0.91

6.07 6.35 6.35 6.64 7.51 7.51 11.26 11.55 11.84 13.00 14.44 15.60 17.33 19.35 21.66 23.97 26.28

m m m m m m m m m m m m m m m m m

7.10 7.64 7.91 8.82 10.48 11.69 17.21 19.29 22.01 27.20 33.46 39.43 47.41 56.11 69.26 83.70 138.26

600/1000 Volt grade; seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4.0 mm2

1.27 1.73 3.11

1.45 1.98 3.56

0.20 0.20 0.23

5.78 5.78 6.64

m m m

7.23 7.75 10.21

600/1000 Volt grade; twelve core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

1.83 2.75

2.09 3.15

0.23 0.24

6.64 6.93

m m

8.74 10.08

600/1000 Volt grade; nineteen core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

2.76 4.06

3.16 4.65

0.26 0.28

7.51 8.09

m m

10.67 12.74

Material Costs/Prices for Measured Works – Electrical Installations

521

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

600/1000 Volt grade; twenty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

3.74 5.19

4.28 5.95

0.29 0.30

8.38 8.66

m m

12.66 14.61

600/1000 Volt grade; thirty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

4.67 6.51

5.35 7.46

0.32 0.33

9.24 9.53

m m

14.59 16.99

600/1000 Volt grade; single core (aluminium wire armour) 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2 630 mm2 800 mm2 1000 mm2

4.75 4.75 4.75 5.65 5.74 5.97 8.63 13.40 13.56 19.52 21.66 24.41 41.65 50.23 66.01

5.45 5.45 5.45 6.47 6.58 6.84 9.89 15.36 15.53 22.37 24.82 27.96 47.71 57.55 75.63

1.70 1.79 2.06 2.12 2.39 2.47 2.73 3.05 3.45 3.84 4.21 5.70 6.20 7.50 10.00

49.10 51.70 59.50 61.23 69.03 71.34 78.85 88.09 99.64 110.91 121.59 164.63 179.07 216.62 288.82

nr nr nr nr nr nr nr nr nr nr nr m m m m

54.55 57.14 64.94 67.70 75.61 78.18 88.73 103.45 115.17 133.27 146.41 192.59 226.78 274.17 364.45

600/1000 Volt grade; two core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

4.59 4.59 4.61 4.69 5.01 5.06 5.74 5.66 8.41 8.61 12.80 13.22 18.72 19.05 20.29 27.46 43.50

5.26 5.26 5.28 5.38 5.74 5.80 6.58 6.49 9.64 9.86 14.67 15.14 21.44 21.83 23.24 31.46 49.84

0.58 0.58 0.58 0.67 1.00 1.11 1.70 1.79 2.06 2.12 2.39 2.47 2.73 3.05 3.45 3.84 4.21

16.75 16.75 16.75 19.35 28.88 32.06 49.10 51.70 59.50 61.23 69.03 71.34 78.85 88.09 99.64 110.91 121.59

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

22.01 22.01 22.03 24.73 34.62 37.86 55.68 58.18 69.14 71.09 83.69 86.48 100.29 109.92 122.89 142.37 171.43

Cable termination; brass weatherproof gland with inner and outer seal, shroud, brass locknut and earth ring (including drilling and cutting mild steel gland plate)

522

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd ARMOURED CABLE – cont'd Cable termination – cont'd 600/1000 Volt grade; three core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

4.74 4.74 4.61 5.21 5.84 5.93 8.53 8.65 8.71 13.01 13.30 13.93 19.56 20.05 28.76 29.24 39.26

5.43 5.43 5.28 5.97 6.70 6.79 9.77 9.91 9.98 14.90 15.24 15.96 22.41 22.97 32.95 33.50 44.98

0.62 0.62 0.62 0.71 1.06 1.19 1.81 1.99 2.23 2.40 2.63 2.83 3.22 3.44 3.83 4.28 5.00

17.91 17.91 17.91 20.51 30.62 34.37 52.28 57.48 64.41 69.32 75.96 81.74 93.00 99.35 110.62 123.62 144.41

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

23.34 23.34 23.19 26.48 37.31 41.16 62.05 67.39 74.39 84.22 91.20 97.70 115.41 122.33 143.57 157.12 189.39

600/1000 Volt grade; four core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2

4.90 4.90 4.94 6.04 6.04 6.15 8.77 8.93 13.03 13.42 19.07 19.92 20.42 27.91 30.16 40.45 43.25

5.61 5.61 5.66 6.92 6.92 7.05 10.05 10.23 14.92 15.38 21.85 22.82 23.39 31.97 34.55 46.35 49.55

0.67 0.67 0.71 0.76 1.14 1.29 1.99 2.16 2.49 2.65 2.98 3.15 3.50 3.72 4.33 4.86 5.46

19.35 19.35 20.51 21.95 32.93 37.26 57.48 62.39 71.92 76.54 86.07 90.98 101.09 107.44 125.06 140.37 157.70

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

24.96 24.96 26.16 28.87 39.84 44.30 67.53 72.61 86.84 91.92 107.92 113.80 124.48 139.41 159.61 186.71 207.24

600/1000 Volt grade; seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2 4 mm2

5.33 5.33 4.23

6.11 6.11 4.85

0.81 0.85 0.93

23.39 24.55 26.86

nr nr nr

29.51 30.66 31.71

600/1000 Volt grade; twelve core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

6.40 7.04

7.33 8.06

1.14 1.13

32.93 32.64

nr nr

40.25 40.70

Material Costs/Prices for Measured Works – Electrical Installations

523

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

600/1000 Volt grade; nineteen core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

8.08 8.08

9.26 9.26

1.54 1.54

44.48 44.48

nr nr

53.73 53.73

600/1000 Volt grade; twenty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

9.28 11.83

10.63 13.56

1.94 2.31

56.03 66.72

nr nr

66.67 80.27

600/1000 Volt grade; thirty seven core (galvanised steel wire armour) 1.5 mm2 2.5 mm2

13.28 13.28

15.21 15.21

2.53 2.87

73.07 82.89

nr nr

88.29 98.11

0.45 0.68 0.94

0.52 0.77 1.07

0.09 0.10 0.12

2.60 2.89 3.47

m m m

3.11 3.66 4.54

0.08 0.15 0.23 0.32 0.51 0.76 1.78 1.61 2.16 3.17 4.37 5.42 6.74

0.09 0.17 0.27 0.37 0.59 0.87 2.04 1.84 2.47 3.63 5.00 6.21 7.73

0.03 0.03 0.03 0.04 0.04 0.05 0.06 0.06 0.07 0.08 0.08 0.10 0.13

0.87 0.87 0.87 1.16 1.16 1.44 1.73 1.73 2.02 2.31 2.31 2.89 3.75

m m m m m m m m m m m m m

0.96 1.04 1.13 1.52 1.74 2.31 3.78 3.58 4.50 5.94 7.31 9.10 11.48

0.37 0.64 0.50 0.71 0.93 2.04 2.93

0.42 0.73 0.58 0.82 1.06 2.34 3.35

0.01 0.02 0.02 0.02 0.02 0.03 0.03

0.29 0.58 0.58 0.58 0.58 0.87 0.87

m m m m m m m

0.71 1.31 1.16 1.39 1.64 3.20 4.22

UN-ARMOURED CABLE Cable: XLPE insulated; PVC sheathed 90c copper to CMA Code 6181e; for internal wiring; clipped to backgrounds; (Supports and fixings included) 300/500 Volt grade; single core 6.0 mm2 10 mm2 16 mm2 Cable; LSF insulated to CMA Code 6491B; non-sheathed copper; laid/drawn in trunking/ conduit 450/750 Volt grade; single core 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2 25.0 mm2 35.0 mm2 50.0 mm2 70.0 mm2 95.0 mm2 120.0 mm2 150.0 mm2 Cable; twin & earth to CMA code 6242Y; clipped to backgrounds 300/500 Volt grade; PVC/PVC 1.5 mm2 2C+E 1.5 mm2 3C+E 2.5mm2 2C+E 4.0mm2 2C+E 6.0mm2 2C+E 10.0mm2 2C+E 16.0mm2 2C+E

524

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd UN-ARMOURED CABLE – cont'd Cable – cont'd 300/500 Volt grade; LSF/LSF 1.5 mm2 2C+E 1.5 mm2 3C+E 2.5mm2 2C+E 4.0mm2 2C+E 6.0mm2 2C+E 10.0mm2 2C+E 16.0mm2 2C+E

0.51 0.88 0.67 1.04 1.37 2.99 4.35

0.59 1.01 0.77 1.20 1.57 3.43 4.98

0.01 0.02 0.02 0.02 0.02 0.03 0.03

0.29 0.58 0.58 0.58 0.58 0.87 0.87

m m m m m m m

0.88 1.59 1.35 1.77 2.14 4.29 5.85

0.08 0.15 0.23 0.32 0.51 0.76 1.78 1.61 2.16 3.17 4.37 5.42 6.74 8.20 10.70

0.09 0.17 0.27 0.37 0.59 0.87 2.04 1.84 2.47 3.63 5.00 6.21 7.73 9.39 12.26

0.03 0.03 0.03 0.04 0.04 0.05 0.06 0.06 0.07 0.08 0.08 0.10 0.13 0.16 0.20

0.87 0.87 0.87 1.16 1.16 1.44 1.73 1.73 2.02 2.31 2.31 2.89 3.75 4.62 5.78

m m m m m m m m m m m m m m m

0.96 1.04 1.13 1.52 1.74 2.31 3.78 3.58 4.50 5.94 7.31 9.10 11.48 14.02 18.04

300 Volt grade; two core 0.50 mm2 0.75 mm2

0.13 0.17

0.15 0.19

0.07 0.07

2.02 2.02

m m

2.17 2.22

300 Volt grade; three core 0.50 mm2 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.15 0.25 0.26 0.41 0.54

0.17 0.29 0.30 0.47 0.62

0.07 0.07 0.07 0.07 0.08

2.02 2.02 2.02 2.02 2.31

m m m m m

2.19 2.31 2.32 2.49 2.93

EARTH CABLE Cable; LSF insulated to CMA Code 6491B; non-sheathed copper; laid/drawn in trunking/ conduit 450/750 Volt grade; single core 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10.0 mm2 16.0 mm2 25.0 mm2 35.0 mm2 50.0 mm2 70.0 mm2 95.0 mm2 120.0 mm2 150.0 mm2 185.0 mm2 240.0 mm2 FLEXIBLE CABLE Flexible cord; PVC insulated; PVC sheathed; copper stranded to CMA Code 218Y (laid loose)

Material Costs/Prices for Measured Works – Electrical Installations

525

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Flexible cord; PVC insulated; PVC sheathed; copper stranded to CMA Code 318Y (laid loose) 300/500 Volt grade; two core 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.15 0.19 0.26 0.44

0.17 0.22 0.30 0.50

0.07 0.07 0.07 0.07

2.02 2.02 2.02 2.02

m m m m

2.19 2.24 2.32 2.53

300/500 Volt grade; three core 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.19 0.24 0.34 0.56

0.22 0.28 0.39 0.64

0.07 0.07 0.07 0.08

2.02 2.02 2.02 2.31

m m m m

2.24 2.30 2.41 2.95

300/500 Volt grade; four core 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.26 0.35 0.52 0.80

0.30 0.40 0.60 0.92

0.08 0.08 0.08 0.09

2.31 2.31 2.31 2.60

m m m m

2.61 2.71 2.91 3.52

300/500 Volt grade; two core 0.50 mm2 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.20 0.25 0.29 0.41 0.60

0.23 0.29 0.34 0.47 0.69

0.07 0.07 0.07 0.07 0.07

2.02 2.02 2.02 2.02 2.02

m m m m m

2.25 2.31 2.36 2.49 2.71

300/500 Volt grade; three core 0.50 mm2 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.26 0.31 0.35 0.46 0.70

0.30 0.36 0.40 0.53 0.80

0.07 0.07 0.07 0.07 0.07

2.02 2.02 2.02 2.02 2.02

m m m m m

2.32 2.38 2.42 2.55 2.82

300/500 Volt grade; two core 0.50 mm2 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.28 0.30 0.38 0.53 0.69

0.32 0.34 0.44 0.61 0.79

0.07 0.07 0.07 0.07 0.07

2.02 2.02 2.02 2.02 2.02

m m m m m

2.34 2.37 2.46 2.63 2.81

300/500 Volt grade; three core 0.50 mm2 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.36 0.40 0.52 0.70 1.08

0.41 0.46 0.60 0.80 1.24

0.07 0.07 0.07 0.07 0.07

2.02 2.02 2.02 2.02 2.02

m m m m m

2.43 2.48 2.62 2.82 3.26

Flexible cord; PVC insulated; PVC sheathed for use in high temperature zones; copper stranded to CMA Code 309Y (laid loose)

Flexible cord; rubber insulated; rubber sheathed; copper stranded to CMA code 318 (laid loose)

526

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd FLEXIBLE CABLE – cont'd Flexible cord – cont'd 300/500 Volt grade; four core 0.50 mm2 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.45 0.51 0.57 0.83 1.09

0.52 0.58 0.65 0.95 1.25

0.08 0.08 0.08 0.08 0.08

2.31 2.31 2.31 2.31 2.31

m m m m m

2.83 2.89 2.96 3.26 3.56

450/750 Volt grade; two core 0.50 mm2 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.21 0.32 0.35 0.45 0.69

0.24 0.37 0.40 0.52 0.79

0.07 0.07 0.07 0.07 0.07

2.02 2.02 2.02 2.02 2.02

m m m m m

2.26 2.39 2.42 2.54 2.81

450/750 Volt grade; three core 0.50 mm2 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.34 0.39 0.43 0.46 0.62

0.39 0.45 0.49 0.53 0.71

0.07 0.07 0.07 0.07 0.07

2.02 2.02 2.02 2.02 2.02

m m m m m

2.41 2.47 2.51 2.55 2.73

450/750 Volt grade; four core 0.75 mm2 1.0 mm2 1.5 mm2 2.5 mm2

0.51 0.65 0.94 1.47

0.58 0.74 1.08 1.68

0.08 0.08 0.08 0.08

2.31 2.31 2.31 2.31

m m m m

2.89 3.06 3.39 3.99

450/750 Volt grade; two core 1.0 mm2 1.5 mm2 2.5 mm2

0.36 0.43 0.59

0.41 0.49 0.68

0.08 0.08 0.08

2.31 2.31 2.31

m m m

2.72 2.80 2.99

450/750 Volt grade; three core 1.0 mm2 1.5 mm2 2.5 mm2

0.43 0.46 0.62

0.49 0.53 0.71

0.08 0.08 0.08

2.31 2.31 2.31

m m m

2.80 2.84 3.02

450/750 Volt grade; four core 1.0 mm2 1.5 mm2 2.5 mm2

0.59 0.64 0.89

0.68 0.73 1.02

0.08 0.08 0.08

2.31 2.31 2.31

m m m

2.99 3.04 3.33

Flexible cord; rubber insulated; rubber sheathed; for 90C operation; copper stranded to CMA Code 318 (laid loose)

Heavy flexible cable; rubber insulated; rubber sheathed; copper stranded to CMA Code 638P (laid loose)

Material Costs/Prices for Measured Works – Electrical Installations

527

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

FIRE RATED CABLE Cable, mineral insulated; copper sheathed with copper conductors; fixed with clips to backgrounds. BASEC approval to BS 6207 Part 1 1995; complies with BS 6387 Category CWZ Light duty 500 Volt grade; bare 2L 1.0 2L 1.5 2L 2.5 2L 4.0 3L 1.0 3L 1.5 3L 2.5 4L 1.0 4L 1.5 4L 2.5 7L 1.5 7L 2.5

3.39 3.87 4.66 6.57 4.00 4.75 6.79 4.57 5.12 8.05 8.10 10.30

3.89 4.43 5.34 7.53 4.58 5.44 7.78 5.24 5.87 9.22 9.28 11.80

0.23 0.23 0.25 0.25 0.24 0.25 0.25 0.25 0.25 0.26 0.28 0.27

6.64 6.64 7.22 7.22 6.93 7.22 7.22 7.22 7.22 7.51 8.09 7.80

m m m m m m m m m m m m

10.53 11.08 12.56 14.75 11.51 12.66 15.01 12.46 13.09 16.73 17.37 19.59

Light duty 500 Volt grade; LSF sheathed 2L 1.0 2L 1.5 2L 2.5 2L 4.0 3L 1.0 3L 1.5 3L 2.5 4L 1.0 4L 1.5 4L 2.5 7L 1.5 7L 2.5

3.64 4.05 4.85 6.82 4.32 5.07 7.08 4.91 5.49 8.30 8.91 11.17

4.17 4.64 5.56 7.82 4.95 5.81 8.11 5.62 6.29 9.51 10.21 12.80

0.23 0.23 0.25 0.25 0.24 0.25 0.25 0.25 0.25 0.26 0.28 0.27

6.64 6.64 7.22 7.22 6.93 7.22 7.22 7.22 7.22 7.51 8.09 7.80

m m m m m m m m m m m m

10.81 11.28 12.78 15.04 11.88 13.03 15.34 12.84 13.51 17.02 18.29 20.59

Heavy duty 750 Volt grade; bare 1H 10 1H 16 1H 25 1H 35 1H 50 1H 70 1H 95 1H 120 1H 150 1H 185 1H 240 2H 1.5 2H 2.5 2H 4.0 2H 6.0 2H 10.0 2H 16.0 2H 25.0 3H 1.5 3H 2.5 3H 4.0 3H 6.0

6.81 9.22 12.81 18.49 20.24 27.01 40.05 42.13 51.68 63.02 81.99 6.28 7.58 9.29 11.93 15.26 21.82 30.09 6.97 8.65 10.53 13.01

7.81 10.57 14.67 21.18 23.19 30.94 45.88 48.27 59.21 72.20 93.93 7.20 8.68 10.64 13.67 17.49 24.99 34.47 7.99 9.91 12.06 14.91

0.25 0.26 0.27 0.32 0.35 0.38 0.41 0.46 0.50 0.56 0.69 0.25 0.26 0.26 0.29 0.34 0.40 0.44 0.25 0.25 0.27 0.30

7.22 7.51 7.80 9.24 10.11 10.98 11.84 13.29 14.44 16.17 19.93 7.22 7.51 7.51 8.38 9.82 11.55 12.71 7.22 7.22 7.80 8.66

m m m m m m m m m m m m m m m m m m m m m m

15.03 18.08 22.47 30.42 33.30 41.92 57.73 61.55 73.65 88.37 113.86 14.42 16.19 18.15 22.05 27.31 36.55 47.18 15.21 17.13 19.86 23.57

528

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd FIRE RATED CABLE – cont'd Cable, mineral insulated – cont'd Heavy duty 750 Volt grade; bare – cont'd 3H 10.0 3H 16.0 3H 25.0 4H 1.5 4H 2.5 4H 4.0 4H 6.0 4H 10.0 4H 16.0 4H 25.0 7H 1.5 7H 2.5 12H 2.5 19H 1.5

19.29 25.98 38.11 8.48 10.28 12.69 16.05 22.80 32.67 46.64 11.43 15.23 25.98 38.09

22.10 29.77 43.66 9.71 11.78 14.54 18.38 26.12 37.43 53.43 13.09 17.45 29.77 43.64

0.35 0.41 0.47 0.24 0.26 0.29 0.31 0.37 0.44 0.52 0.30 0.32 0.39 0.42

10.11 11.84 13.57 6.93 7.51 8.38 8.95 10.69 12.71 15.02 8.66 9.24 11.26 12.13

m m m m m m m m m m m m m m

32.21 41.61 57.23 16.64 19.28 22.91 27.34 36.80 50.14 68.45 21.76 26.69 41.03 55.77

Heavy duty 750 Volt grade; LSF sheathed 1H 10 1H 16 1H 25 1H 35 1H 50 1H 70 1H 95 1H 120 1H 150 1H 185 1H 240 2H 1.5 2H 2.5 2H 4.0 2H 6.0 2H 10.0 2H 16.0 2H 25.0 3H 1.5 3H 2.5 3H 4.0 3H 6.0 3H 10.0 3H 16.0 3H 25.0 4H 1.5 4H 2.5 4H 4.0 4H 6.0 4H 10.0 4H 16.0 4H 25.0 7H 1.5 7H 2.5

7.22 9.55 13.14 19.37 21.29 27.23 40.77 43.33 52.82 64.26 83.88 6.50 7.79 9.61 12.37 15.89 22.57 30.95 7.08 8.86 10.96 13.77 20.15 26.91 39.09 8.71 10.67 13.24 16.80 23.83 33.64 47.94 11.81 15.70

8.27 10.94 15.05 22.19 24.40 31.19 46.71 49.64 60.52 73.62 96.10 7.44 8.93 11.01 14.17 18.21 25.86 35.46 8.11 10.15 12.56 15.78 23.09 30.83 44.78 9.98 12.23 15.17 19.25 27.30 38.54 54.93 13.53 17.98

0.25 0.26 0.27 0.32 0.35 0.38 0.41 0.46 0.50 0.56 0.68 0.25 0.26 0.26 0.29 0.34 0.40 0.44 0.25 0.25 0.27 0.30 0.35 0.41 0.47 0.24 0.26 0.29 0.31 0.37 0.44 0.52 0.30 0.32

7.22 7.51 7.80 9.24 10.11 10.98 11.84 13.29 14.44 16.17 19.64 7.22 7.51 7.51 8.38 9.82 11.55 12.71 7.22 7.22 7.80 8.66 10.11 11.84 13.57 6.93 7.51 8.38 8.95 10.69 12.71 15.02 8.66 9.24

m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m

15.49 18.45 22.85 31.43 34.50 42.17 58.55 62.92 74.96 89.79 115.74 14.67 16.44 18.52 22.54 28.03 37.41 48.17 15.34 17.37 20.36 24.44 33.20 42.67 58.36 16.91 19.74 23.54 28.20 37.99 51.25 69.95 22.19 27.22

Material Costs/Prices for Measured Works – Electrical Installations

529

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

12H 2.5 19H 1.5

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

26.62 39.03

30.50 44.72

0.39 0.42

11.26 12.13

m m

41.76 56.85

8.45 8.48 8.78 8.86

9.68 10.98 10.90 10.99

0.27 0.27 0.27 0.27

7.80 7.80 7.80 7.80

m m m m

17.48 18.77 18.70 18.79

Light duty 500 Volt grade; brass gland; brass pot with earth tail; pot closure; sealing compound; conductor sleving; plastic gland shroud; identification markers 2L 1.0 2L 1.5 2L 2.5 2L 4.0 3L 1.0 3L 1.5 3L 2.5 4L 1.0 4L 1.5 4L 2.5 7L 1.0 7L 1.5 7L 2.5

9.03 9.03 9.03 9.03 9.05 9.05 9.05 9.05 9.05 9.05 21.95 21.95 21.95

10.34 10.34 10.34 10.34 10.37 10.37 10.37 10.37 10.37 10.37 25.15 25.15 25.15

0.39 0.41 0.41 0.46 0.43 0.43 0.44 0.47 0.47 0.50 0.69 0.70 0.74

11.26 11.84 11.84 13.29 12.42 12.42 12.71 13.57 13.57 14.44 19.93 20.22 21.37

nr nr nr nr nr nr nr nr nr nr nr nr nr

21.60 22.18 22.18 23.63 22.79 22.79 23.08 23.95 23.95 24.81 45.08 45.37 46.53

Heavy duty 750 Volt grade; brass gland; brass pot with earth tail; pot closure; sealing compound; conductor sleeving; plastic gland shroud; identification markers 1H 10 1H 16 1H 25 1H 35 1H 50 1H 70 1H 95 1H 120 1H 150 1H 185 1H 240 2H 1.5 2H 2.5 2H 4

9.08 9.08 9.08 9.08 22.02 22.02 22.02 35.67 35.67 35.67 56.28 9.62 9.62 9.62

10.40 10.40 10.40 10.40 25.23 25.23 25.23 40.87 40.87 40.87 64.48 11.03 11.03 11.03

0.37 0.39 0.56 0.57 0.60 0.67 0.75 0.94 0.99 1.26 1.37 0.42 0.42 0.47

10.69 11.26 16.17 16.46 17.33 19.35 21.66 27.15 28.59 36.39 39.57 12.13 12.13 13.57

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

21.09 21.67 26.58 26.87 42.56 44.58 46.89 68.02 69.46 77.26 104.04 23.16 23.16 24.60

Cable terminations for MI Cable; Polymeric one piece moulding; containing grey sealing compound; testing; phase marking and connection Light Duty 500 Volt grade; Brass gland; polymeric one moulding containing grey sealing compound; coloured conductor sleeving; Earth tag; plastic gland shroud 2L 1.5 2L 2.5 3L 1.5 4L 1.5 Cable Terminations; for MI copper sheathed cable. Certified for installation in potentially explosive atmospheres; testing; phase marking and connection; BS 6207 Part 2 1995

530

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd FIRE RATED CABLE – cont'd Cable Terminations – cont'd Heavy duty 750 Volt grade; brass gland; brass pot with earth tail; pot closure; sealing compound; conductor sleeving; plastic gland shroud; identification markers – cont'd 2H 6 2H 10 2H 16 2H 25 3H 1.5 3H 2.5 3H 4 3H 6 3H 10 3H 16 3H 25 4H 1.5 4H 2.5 4H 4 4H 6 4H 10 4H 16 4H 25 7H 1.5 7H 2.5 12H 1.5 12H 2.5 19H 2.5

9.62 23.33 23.33 37.80 9.63 9.63 9.63 23.42 23.42 23.42 59.66 9.63 9.63 23.42 23.42 23.42 37.80 59.66 23.33 23.33 37.80 37.80 59.66

11.03 26.73 26.73 43.31 11.04 11.04 11.04 26.83 26.83 26.83 68.35 11.04 11.04 26.83 26.83 26.83 43.31 68.35 26.73 26.73 43.31 43.31 68.35

0.54 0.58 0.69 0.77 0.44 0.44 0.57 0.61 0.65 0.78 0.85 0.52 0.53 0.60 0.65 0.69 0.88 0.93 0.71 0.74 0.85 1.00 1.11

15.60 16.75 19.93 22.24 12.71 12.71 16.46 17.62 18.77 22.53 24.55 15.02 15.31 17.33 18.77 19.93 25.42 26.86 20.51 21.37 24.55 28.88 32.06

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

26.62 43.48 46.66 65.55 23.74 23.74 27.50 44.45 45.60 49.36 92.90 26.05 26.34 44.16 45.60 46.76 68.72 95.21 47.24 48.10 67.86 72.19 100.41

0.59 0.62 0.75 0.75 0.99 1.63 2.52

0.68 0.71 0.86 0.86 1.13 1.87 2.88

0.13 0.13 0.13 0.13 0.13 0.16 0.16

3.75 3.75 3.75 3.75 3.75 4.62 4.62

m m m m m m m

4.44 4.47 4.61 4.61 4.88 6.49 7.50

Cable; FP100; LOSH insulated; non sheathed fire resistant to LPCB Approved to BS 6387 Catergory CWZ; in conduit or trunking including terminations 450/750 volt grade; single core 1.0 mm2 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10 mm2 16 mm2

Material Costs/Prices for Measured Works – Electrical Installations

531

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Cable; FP200; Insudite insulated; LSOH sheathed screened fire resistant BASEC Approved to BS 7629; fixed with clips to backgrounds 300/500 volt grade; two core 1.5 mm2 2.5 mm2 4.0 mm2

1.85 2.25 3.40

2.12 2.58 3.90

0.13 0.13 0.13

3.75 3.75 3.75

m m m

5.88 6.33 7.65

300/500 volt grade; three core 1.5 mm2 2.5 mm2 4.0 mm2

2.27 2.57 3.57

2.60 2.95 4.09

0.13 0.13 0.13

3.75 3.75 3.75

m m m

6.35 6.70 7.85

300/500 volt grade; four core 1.5 mm2 2.5 mm2 4.0 mm

2.53 3.13 4.28

2.90 3.59 4.91

0.13 0.13 0.13

3.75 3.75 3.75

m m m

6.65 7.34 8.66

Two core 1.5 mm2 2.5 mm2 4.0 mm2

0.70 1.01 0.90

0.81 1.15 1.03

0.35 0.35 0.35

10.11 10.11 10.11

nr nr nr

10.92 11.26 11.14

Three core 1.5 mm2 2.5 mm2 4.0 mm2

0.72 0.72 0.92

0.82 0.82 1.05

0.35 0.35 0.35

10.11 10.11 10.11

nr nr nr

10.93 10.93 11.16

Four core 1.5 mm2 2.5 mm2 4.0 mm2

0.94 0.94 0.94

1.08 1.08 1.08

0.35 0.35 0.35

10.11 10.11 10.11

nr nr nr

11.19 11.19 11.19

2.51 2.91 3.23 3.97 4.29 6.52 9.03

2.87 3.33 3.70 4.55 4.92 7.47 10.34

0.16 0.16 0.16 0.16 0.20 0.20 0.20

4.62 4.62 4.62 4.62 5.78 5.78 5.78

m m m m m m m

7.49 7.95 8.32 9.17 10.69 13.25 16.12

Terminations; including glanding-off, connection to equipment

Cable; FP400; polymeric insulated; LSOH sheathed fire resistant; armoured; with copper stranded copper conductors; BASEC Approved to BS 7846; fixed with clips to backgrounds 600/1000 volt grade; two core 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10 mm2 16 mm2 25 mm2

532

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd FIRE RATED CABLE – cont'd Cable – cont'd 600/1000 volt grade; three core 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10 mm2 16 mm2 25 mm2

2.79 3.26 3.84 4.07 4.94 8.09 10.09

3.19 3.73 4.40 4.66 5.66 9.27 11.56

0.16 0.16 0.16 0.16 0.20 0.20 0.20

4.62 4.62 4.62 4.62 5.78 5.78 5.78

m m m m m m m

7.82 8.35 9.02 9.29 11.43 15.05 17.34

600/1000 volt grade; four core 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10 mm2 16 mm2 25 mm2

3.15 3.81 4.20 5.29 6.27 9.33 13.55

3.60 4.36 4.81 6.06 7.19 10.69 15.52

0.16 0.16 0.16 0.16 0.20 0.20 0.20

4.62 4.62 4.62 4.62 5.78 5.78 5.78

m m m m m m m

8.22 8.98 9.43 10.68 12.96 16.47 21.30

Two core 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10 mm2 16 mm2 25 mm2

4.33 4.33 4.33 5.45 5.45 7.67 7.67

4.96 4.96 4.96 6.24 6.24 8.79 8.79

0.58 0.58 0.58 0.67 1.00 1.11 1.70

16.75 16.75 16.75 19.35 28.88 32.06 49.10

nr nr nr nr nr nr nr

21.71 21.71 21.71 25.59 35.12 40.84 57.88

Three core 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10 mm2 16 mm2 25 mm2

4.33 4.33 4.33 5.45 5.45 7.67 7.67

4.96 4.96 4.96 6.24 6.24 8.79 8.79

0.62 0.62 0.62 0.71 1.06 1.19 1.81

17.91 17.91 17.91 20.51 30.62 34.37 52.28

nr nr nr nr nr nr nr

22.87 22.87 22.87 26.74 36.85 43.15 61.06

Four core 1.5 mm2 2.5 mm2 4.0 mm2 6.0 mm2 10 mm2 16 mm2 25 mm2

4.33 4.33 5.45 5.45 7.67 7.67 12.65

4.96 4.96 6.24 6.24 8.79 8.79 14.50

0.67 0.67 0.71 0.76 1.14 1.29 1.99

19.35 19.35 20.51 21.95 32.93 37.26 57.48

nr nr nr nr nr nr nr

24.31 24.31 26.74 28.19 41.71 46.04 71.97

Terminations; including glanding-off, connection to equipment

Material Costs/Prices for Measured Works – Electrical Installations

533

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Cable; Firetuff fire resistant to BS 6387; fixed with clips to backgrounds Two core 1.5 mm2 2.5 mm2 4.0 mm2

1.89 2.28 2.95

2.17 2.61 3.38

0.16 0.16 0.16

4.62 4.62 4.62

m m m

6.79 7.23 8.00

Three core 1.5 mm2 2.5 mm2 4.0 mm2

2.30 2.60 3.76

2.64 2.98 4.31

0.16 0.16 0.16

4.62 4.62 4.62

m m m

7.26 7.60 8.93

Four core 1.5 mm2 2.5 mm2 4.0 mm2

2.57 3.15 4.30

2.95 3.61 4.93

0.16 0.16 0.16

4.62 4.62 4.62

m m m

7.57 8.23 9.55

129.60

148.48

0.90

25.99

nr

174.47

129.60

148.48

0.95

27.44

nr

175.92

137.69 129.60 129.60

157.75 148.48 148.48

0.95 1.00 1.10

27.44 28.88 31.77

nr nr nr

185.19 177.36 180.25

137.69

157.75

1.10

31.77

nr

189.52

161.98

185.58

1.30

37.55

nr

223.12

161.98 170.09

185.58 194.87

1.45 1.45

41.88 41.88

nr nr

227.46 236.75

170.09

194.87

1.55

44.77

nr

239.63

11.31 17.41 17.41 15.07 23.43

12.96 19.94 19.94 17.27 26.84

0.30 0.32 0.32 0.32 0.35

8.66 9.24 9.24 9.24 10.11

m m m m m

21.63 29.18 29.18 26.51 36.95

2.20 3.55

2.52 4.06

0.18 0.18

5.20 5.20

m m

7.71 9.26

34.24 41.13

39.23 47.12

0.92 0.96

26.57 27.73

nr nr

65.80 74.85

MODULAR WIRING Modular wiring systems; including commissioning Master distribution box; steel; fixed to backgrounds; 6 Port 4.0mm 18 core armoured home run cable 4.0mm 24 core armoured cable home run cable 4.0mm 18 core armoured home run cable & data cable 6.0mm 18 core armoured home run cable 6.0mm 24 core armoured home run cable 6.0mm 18 core armoured home run cable & data cable Master distribution box; steel; fixed to backgrounds; 9 Port 4.0mm 27 core armoured home run 4.0mm 27 core armoured home run data cable 6.0mm 27 core armoured home run 6.0mm 27 core armoured home run data cable

cable cable & cable cable &

Metal clad cable; BSEN 60439 Part 2 1993; BASEC approved 4.0mm 18 core 4.0mm 24 core 4.0mm 27 core 6.0mm 18 core 6.0mm 27 core Metal clad data cable Single twisted pair Twin twisted pair Distribution cables; armoured; BSEN 60439 Part 2 1993; BASEC approved 3 wire; 6.1 metre long 4 wire; 6.1 metre long

534

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd MODULAR WIRING – cont'd Extender cables; armoured; BSEN 60439 Part 2 1993; BASEC approved 3 Wire 0.9 metre long 1.5 metre long 2.1 metre long 2.7 metre long 3.4 metre long 4.6 metre long 6.1 metre long 7.6 metre long 9.1 metre long 10.7 metre long

14.97 17.55 20.13 22.69 25.27 30.46 36.88 43.34 49.80 67.89

17.15 20.11 23.07 25.99 28.95 34.89 42.25 49.65 57.05 77.78

0.13 0.23 0.31 0.40 0.51 0.69 0.92 1.14 1.37 1.61

3.75 6.64 8.95 11.55 14.73 19.93 26.57 32.93 39.57 46.50

nr nr nr nr nr nr nr nr nr nr

20.90 26.75 32.02 37.55 43.68 54.82 68.83 82.57 96.62 124.28

4 Wire 0.9 metre long 1.5 metre long 2.1 metre long 2.7 metre long 3.4 metre long 4.6 metre long 6.1 metre long 7.6 metre long 9.1 metre long 10.7 metre long

16.30 19.51 22.75 25.96 29.18 35.64 43.70 51.75 59.81 67.89

18.67 22.35 26.07 29.74 33.43 40.83 50.07 59.29 68.53 77.78

0.14 0.24 0.32 0.43 0.51 0.67 0.92 1.22 1.46 1.71

4.04 6.93 9.24 12.42 14.73 19.35 26.57 35.24 42.17 49.39

nr nr nr nr nr nr nr nr nr nr

22.72 29.29 35.31 42.16 48.16 60.18 76.64 94.52 110.69 127.16

3 Wire; including twisted pair 0.9 metre long 1.5 metre long 2.1 metre long 2.7 metre long 3.4 metre long 4.6 metre long 6.1 metre long 7.6 metre long 9.1 metre long 10.7 metre long

17.82 21.91 26.00 30.09 34.16 42.34 52.56 62.76 72.98 83.20

20.42 25.11 29.79 34.47 39.14 48.51 60.22 71.90 83.61 95.31

0.13 0.23 0.31 0.40 0.51 0.69 0.92 1.14 1.37 1.61

3.75 6.64 8.95 11.55 14.73 19.93 26.57 32.93 39.57 46.50

nr nr nr nr nr nr nr nr nr nr

24.17 31.75 38.74 46.02 53.87 68.44 86.79 104.82 123.18 141.81

Extender whip ended cables; armoured; BSEN 60439 Part 2 1993; BASEC approved 3 wire; 3.0 metre long 4 wire; 3.0 metre long

20.78 24.32

23.81 27.86

0.30 0.30

8.66 8.66

nr nr

32.47 36.52

12.50 14.18 14.17 15.80

14.32 16.25 16.23 18.11

0.10 0.10 0.15 0.15

2.89 2.89 4.33 4.33

nr nr nr nr

17.21 19.14 20.56 22.44

T Connectors 3 wire Snap fix 0.3 metre flexible cable 0.3 metre armoured cable 0.3 metre armoured cable with twisted pair

Material Costs/Prices for Measured Works – Electrical Installations

535

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

4 Wire Snap fix 0.3 metre flexible cable 0.3 metre armoured cable

13.05 14.69 14.69

14.95 16.83 16.83

0.10 0.10 0.18

2.89 2.89 5.20

nr nr nr

17.84 19.72 22.03

Splitters 5 wire 5 wire converter

20.02 15.52

22.93 17.78

0.20 0.20

5.78 5.78

nr nr

28.71 23.55

Switch modules 3 wire; 6.1 metre long armoured cable 4 wire; 6.1 metre long armoured cable

42.48 47.80

48.67 54.76

0.75 0.80

21.66 23.11

nr nr

70.33 77.87

Distribution cables; un-armoured; IEC 998 DIN/VDE 0628 3 wire; 6.1 metre long 4 wire; 6.1 metre long

14.61 17.46

16.73 20.00

0.70 0.75

20.22 21.66

nr nr

36.95 41.66

3 Wire 0.9 metre long 1.5 metre long 2.1 metre long 2.7 metre long 3.4 metre long 4.6 metre long 6.1 metre long 7.6 metre long 9.1 metre long 10.7 metre long

10.15 10.95 11.78 14.71 13.43 15.18 17.24 19.30 21.36 23.54

11.63 12.55 13.50 16.85 15.38 17.39 19.76 22.11 24.47 26.96

0.07 0.12 0.17 0.22 0.27 0.37 0.49 0.61 0.73 0.86

2.02 3.47 4.91 6.35 7.80 10.69 14.15 17.62 21.08 24.84

nr nr nr nr nr nr nr nr nr nr

13.65 16.01 18.41 23.20 23.18 28.08 33.91 39.72 45.55 51.80

4 Wire 0.9 metre long 1.5 metre long 2.1 metre long 2.7 metre long 3.4 metre long 4.6 metre long 6.1 metre long 7.6 metre long 9.1 metre long 10.7 metre long

11.60 12.64 13.66 14.71 15.72 17.95 20.54 23.13 30.28 33.02

13.29 14.48 15.65 16.85 18.01 20.57 23.53 26.50 34.69 37.83

0.08 0.14 0.19 0.24 0.31 0.41 0.55 0.68 0.82 0.96

2.31 4.04 5.49 6.93 8.95 11.84 15.89 19.64 23.68 27.73

nr nr nr nr nr nr nr nr nr nr

15.60 18.52 21.14 23.78 26.97 32.41 39.41 46.14 58.37 65.56

5 Wire 0.9 metre long 1.5 metre long 2.1 metre long 2.7 metre long 3.4 metre long 4.6 metre long 6.1 metre long 7.6 metre long 9.1 metre long 10.7 metre long

13.68 15.35 17.01 18.66 20.33 22.57 28.08 32.21 36.36 40.81

15.67 17.58 19.49 21.37 23.29 25.86 32.17 36.90 41.66 46.75

0.09 0.15 0.21 0.27 0.34 0.46 0.61 0.76 0.91 1.07

2.60 4.33 6.07 7.80 9.82 13.29 17.62 21.95 26.28 30.90

nr nr nr nr nr nr nr nr nr nr

18.27 21.91 25.55 29.17 33.11 39.15 49.79 58.85 67.94 77.65

Extender cables; un-armoured; IEC 998 DIN/ VDE 0628

Material Costs/Prices for Measured Works – Electrical Installations

536

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV CABLES AND WIRING – cont'd MODULAR WIRING – cont'd Extender whip ended cables; armoured; IEC 998 DIN/VDE 0628 3 wire; 2.5mm; 3.0 metre long 4 wire; 2.5mm; 3.0 metre long

10.34 12.15

11.85 13.92

0.30 0.30

8.66 8.66

nr nr

20.51 22.58

T Connectors 3 wire 5 pin; direct fix 5 pin; 1.5mm flexible cable; 0.3 metre long

10.46 13.37

11.98 15.32

0.10 0.15

2.89 4.33

nr nr

14.87 19.65

4 Wire 5 pin; direct fix 5 pin; 1.5mm flexible cable; 0.3 metre long

12.16 15.15

13.93 17.35

0.20 0.20

5.78 5.78

nr nr

19.71 23.13

5 Wire 5 pin; direct fix

13.86

15.88

0.20

5.78

nr

21.66

Splitters 3 way; 5 pin

7.98

9.15

0.25

7.22

nr

16.37

Switch Modules 3 wire 4 wire

22.75 23.71

26.07 27.16

0.20 0.22

5.78 6.35

nr nr

31.84 33.51

417.44 513.10 643.56 972.30

478.25 587.84 737.30 1113.93

3.41 3.58 5.00 5.90

98.49 103.40 144.41 170.41

m m m m

576.73 691.24 881.71 1284.33

IP54 protection 1000 Amp TP&N 1350 Amp TP&N 2000 Amp TP&N 2500 Amp TP&N

28.47 30.59 42.44 50.39

32.62 35.05 48.62 57.73

2.16 2.61 3.51 3.96

62.39 75.38 101.38 114.37

m m m m

95.00 110.43 150.00 172.11

End cover 1000 Amp 1350 Amp 2000 Amp 2500 Amp

32.74 34.15 54.80 55.49

37.51 39.13 62.78 63.58

0.56 0.56 0.66 0.66

16.17 16.17 19.06 19.06

nr nr nr nr

53.68 55.30 81.84 82.64

Y62 – BUSBAR TRUNKING MAINS BUSBAR Low impedance busbar trunking; fixed to backgrounds including supports, fixings and connections/jointing to equipment Straight copper busbar 1000 Amp TP&N 1350 Amp TP&N 2000 Amp TP&N 2500 Amp TP&N Extra for fittings mains bus bar

TP&N TP&N TP&N TP&N

Material Costs/Prices for Measured Works – Electrical Installations

537

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Edge elbow 1000 Amp 1350 Amp 2000 Amp 2500 Amp

TP&N TP&N TP&N TP&N

468.95 527.76 818.58 1075.13

537.26 604.63 937.82 1231.74

2.01 2.01 2.40 2.40

58.05 58.05 69.32 69.32

nr nr nr nr

595.31 662.69 1007.14 1301.05

Flat elbow 1000 Amp 1350 Amp 2000 Amp 2500 Amp

TP&N TP&N TP&N TP&N

406.86 441.16 625.79 779.38

466.12 505.42 716.94 892.90

2.01 2.01 2.40 2.40

58.05 58.05 69.32 69.32

nr nr nr nr

524.17 563.47 786.26 962.22

Offset 1000 1350 2000 2500

Amp Amp Amp Amp

TP&N TP&N TP&N TP&N

816.97 1004.86 1583.28 1802.21

935.98 1151.23 1813.91 2064.73

3.00 3.00 3.50 3.50

86.65 86.65 101.09 101.09

nr nr nr nr

1022.62 1237.88 1915.00 2165.82

Edge Z unit 1000 Amp 1350 Amp 2000 Amp 2500 Amp

TP&N TP&N TP&N TP&N

1223.81 1566.94 2347.96 2681.28

1402.08 1795.18 2689.98 3071.85

3.00 3.00 3.50 3.50

86.65 86.65 101.09 101.09

nr nr nr nr

1488.72 1881.83 2791.06 3172.94

Flat Z unit 1000 Amp 1350 Amp 2000 Amp 2500 Amp

TP&N TP&N TP&N TP&N

1050.63 1323.49 1970.52 2369.20

1203.66 1516.27 2257.55 2714.30

3.00 3.00 3.50 3.50

86.65 86.65 101.09 101.09

nr nr nr nr

1290.31 1602.92 2358.64 2815.39

Edge tee 1000 Amp 1350 Amp 2000 Amp 2500 Amp

TP&N TP&N TP&N TP&N

1223.81 1566.94 2347.96 2682.91

1402.08 1795.18 2689.98 3073.72

2.20 2.20 2.60 2.60

63.54 63.54 75.09 75.09

nr nr nr nr

1465.62 1858.73 2765.07 3148.81

199.15

228.16

0.82

23.68

nr

251.84

Tap off; TP&N fusable with on-load switch; excludes fuses 32 Amp 63 Amp 100 Amp 160 Amp 250 Amp 315 Amp

563.73 575.03 703.61 800.29 1033.14 1219.66

645.84 658.79 806.10 916.86 1183.63 1397.32

0.82 0.88 1.18 1.41 1.76 2.06

23.68 25.42 34.08 40.72 50.83 59.50

nr nr nr nr nr nr

669.52 684.20 840.18 957.59 1234.46 1456.82

Tap off; TP&N MCCB 63 Amp 125 Amp 160 Amp 250 Amp 400 Amp

712.34 853.76 932.21 1198.93 1528.36

816.10 978.13 1068.00 1373.57 1750.99

0.88 1.18 1.41 1.76 2.06

25.42 34.08 40.72 50.83 59.50

nr nr nr nr nr

841.52 1012.21 1108.72 1424.40 1810.49

Tap off; TP&N integral contactor/breaker 18 Amp

Material Costs/Prices for Measured Works – Electrical Installations

538

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd BUSBAR TRUNKING – cont'd RISING MAINS BUSBAR Rising mains busbar; insulated supports, earth continuity bar; including couplers; fixed to backgrounds Straight aluminium bar 200 Amp TP&N 315 Amp TP&N 400 Amp TP&N 630 Amp TP&N 800 Amp TP&N

149.05 166.77 193.33 239.09 358.62

170.76 191.06 221.49 273.91 410.86

2.13 2.15 2.15 2.47 2.88

61.52 62.10 62.10 71.34 83.18

m m m m m

232.28 253.16 283.59 345.25 494.04

End feed unit 200 Amp TP&N 315 Amp TP&N 400 Amp TP&N 630 Amp TP&N 800 Amp TP&N

298.86 298.86 334.43 334.43 371.55

342.39 342.39 383.14 383.14 425.67

2.57 2.76 2.76 3.64 4.54

74.23 79.71 79.71 105.13 131.13

nr nr nr nr nr

416.62 422.10 462.86 488.27 556.80

Top feeder unit 200 Amp TP&N 315 Amp TP&N 400 Amp TP&N 630 Amp TP&N 800 Amp TP&N

298.86 298.86 334.43 334.43 371.55

342.39 342.39 383.14 383.14 425.67

2.57 2.76 2.76 3.64 4.54

74.23 79.71 79.71 105.13 131.13

nr nr nr nr nr

416.62 422.10 462.86 488.27 556.80

TP&N TP&N TP&N TP&N TP&N

25.61 25.61 28.47 28.47 82.54

29.34 29.34 32.62 32.62 94.56

0.18 0.27 0.27 0.41 0.41

5.20 7.80 7.80 11.84 11.84

nr nr nr nr nr

34.54 37.14 40.41 44.46 106.40

Edge elbow 200 Amp TP&N 315 Amp TP&N 400 Amp TP&N 630 Amp TP&N 800 Amp TP&N

35.59 35.59 267.55 267.55 253.31

40.77 40.77 306.52 306.52 290.20

0.55 0.94 0.94 1.45 1.45

15.89 27.15 27.15 41.88 41.88

nr nr nr nr nr

56.66 67.92 333.67 348.40 332.08

Flat elbow 200 Amp 315 Amp 400 Amp 630 Amp 800 Amp

115.27 115.27 156.54 156.54 216.31

132.07 132.07 179.34 179.34 247.82

0.55 0.94 0.94 1.45 1.45

15.89 27.15 27.15 41.88 41.88

nr nr nr nr nr

147.95 159.22 206.49 221.22 289.70

Extra for fittings rising busbar

End cap 200 Amp 315 Amp 400 Amp 630 Amp 800 Amp

TP&N TP&N TP&N TP&N TP&N

Material Costs/Prices for Measured Works – Electrical Installations

539

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Edge tee 200 Amp 315 Amp 400 Amp 630 Amp 800 Amp

TP&N TP&N TP&N TP&N TP&N

162.24 162.24 227.70 227.70 324.46

185.88 185.88 260.87 260.87 371.73

0.61 1.02 1.02 1.57 1.57

17.62 29.46 29.46 45.35 45.35

nr nr nr nr nr

203.49 215.33 290.33 306.21 417.07

Flat tee 200 Amp 315 Amp 400 Amp 630 Amp 800 Amp

TP&N TP&N TP&N TP&N TP&N

207.77 162.24 327.31 327.31 456.81

238.04 185.88 374.98 374.98 523.35

0.61 1.02 1.02 1.57 1.57

17.62 29.46 29.46 45.35 45.35

nr nr nr nr nr

255.66 215.33 404.44 420.33 568.70

152.27 201.26 270.12 405.18 590.55

174.45 230.57 309.46 464.20 676.57

0.82 0.88 1.18 1.41 2.06

23.68 25.42 34.08 40.72 59.50

nr nr nr nr nr

198.13 255.99 343.54 504.92 736.06

154.93 214.51 344.26 582.60 1022.21

177.50 245.75 394.41 667.47 1171.10

0.82 0.88 1.18 1.41 2.06

23.68 25.42 34.08 40.72 59.50

nr nr nr nr nr

201.18 271.17 428.49 708.19 1230.60

Straight lengths – 25 Amp 2 Pole & PE 4 Pole & PE

25.85 27.96

29.62 32.03

0.16 0.16

4.62 4.62

m m

34.24 36.65

Straight lengths – 40 Amp 2 Pole & PE 4 Pole & PE

25.56 34.33

29.28 39.33

0.16 0.16

4.62 4.62

m m

33.90 43.95

21.85 21.18

18.73 25.03 24.27

0.10 0.10 0.10

2.89 2.89 2.89

nr nr nr

21.62 27.92 27.15

18.75

21.48

0.10

2.89

nr

24.37

Tap off units TP&N fusable with on-load switch; excludes fuses 32 Amp 63 Amp 100 Amp 250 Amp 400 Amp TP&N MCCB 32 Amp 63 Amp 100 Amp 250 Amp 400 Amp LIGHTING BUSBAR Pre-wired busbar, plug-in trunking for lighting; galvanised sheet steel housing (PE); tin-plated copper conductors with tap-off units at 1m intervals

Components for pre-wired busbars, plug-in trunking for lighting Plug-in tap off units 10 Amp with phase selection, 2P & PE; 2m of cable16.35 10 Amp 4 Pole & PE; 3m of cable 16 Amp 4 Pole & PE; 3m of cable 16 Amp with phase selection, 2P & PE; no cable

540

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd BUSBAR TRUNKING – cont'd LIGHTING BUSBAR – cont'd Components for pre-wired busbars, plug-in trunking for lighting – cont'd Trunking components End feed unit & cover; 4P & PE Centre feed unit Right hand, intermediate terminal box feed unit End cover (for R/hand feed) Flexible elbow unit Fixing bracket – universal Suspension Bracket – Flat

27.62 136.89

31.64 156.83

0.23 0.29

6.64 8.38

nr nr

38.29 165.21

28.83 7.98 65.54 4.78 4.21

33.03 9.14 75.09 5.48 4.82

0.23 0.06 0.12 0.10 0.10

6.64 1.73 3.47 2.89 2.89

nr nr nr nr nr

39.67 10.88 78.55 8.36 7.71

17.37 21.97

19.90 25.17

0.28 0.28

8.09 8.09

m m

27.99 33.26

28.78

32.97

0.25

7.22

nr

40.19

34.65

39.70

0.28

8.09

nr

47.78

31.01 33.96 9.65 10.38 53.43 60.33 65.20 71.53

35.53 38.91 11.06 11.89 61.21 69.12 74.70 81.95

0.35 0.38 0.11 0.11 0.34 0.35 0.37 0.37

10.11 10.98 3.18 3.18 9.82 10.11 10.69 10.69

nr nr nr nr nr nr nr nr

45.64 49.88 14.23 15.07 71.03 79.23 85.38 92.64

UNDERFLOOR BUSBAR Pre-wired busbar, plug-in trunking for underfloor power distribution; galvanised sheet steel housing (PE); copper conductors with tap-off units at 300mm intervals Straight lengths – 63 Amp 2 pole & PE 3 pole & PE; Clean Earth System Components for pre-wired busbars, plug-in trunking for underfloor power distribution. Plug-in tap off units 32 Amp 2P & PE; 3m metal flexible pre-wired 3m metal flexible pre-wired conduit 32 Amp 3P & PE; clean earth; 3m metal flexible pre-wired conduit Trunking components End feed unit & cover; 2P & PE End feed unit & cover; 3P & PE; clean earth End cover; 2P & PE End cover; 3P & PE Flexible interlink/corner; 2P&PE; 1m long Flexible interlink/corner; 3P&PE; 1m long Flexible interlink/corner; 2P&PE; 2m long Flexible interlink/corner; 3P&PE; 2m long Y63 – CABLE SUPPORTS LADDER RACK Light duty Galvanised Steel Ladder Rack; fixed to backgrounds; including supports, fixings and brackets; earth continuity straps

Material Costs/Prices for Measured Works – Electrical Installations

541

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Straight lengths 150 mm wide 300 mm wide 450 mm wide 600 mm wide

ladder ladder ladder ladder

Material £

Labour hours

Labour £

Unit

Total rate £

15.91 16.57 17.69 18.84

18.23 18.98 20.26 21.58

0.69 0.88 1.26 1.51

19.93 25.42 36.39 43.61

m m m m

38.16 44.40 56.66 65.20

riser bend mm wide ladder mm wide ladder mm wide ladder mm wide ladder

55.10 57.05 57.90 60.01

63.12 65.36 66.34 68.75

0.33 0.56 0.85 0.99

9.53 16.17 24.55 28.59

nr nr nr nr

72.66 81.53 90.89 97.34

Outside riser bend 300 mm wide ladder 450 mm wide ladder 600 mm wide ladder

55.10 57.90 60.01

63.12 66.34 68.75

0.43 0.73 0.86

12.42 21.08 24.84

nr nr nr

75.54 87.42 93.58

Equal tee 300 mm wide ladder 450 mm wide ladder 600 mm wide ladder

66.13 67.53 71.01

75.76 77.37 81.35

0.62 1.09 1.12

17.91 31.48 32.35

nr nr nr

93.67 108.85 113.70

Unequal tee 300 mm wide ladder 450 mm wide ladder 600 mm wide ladder

69.38 71.26 73.20

79.48 81.64 83.87

0.57 1.17 1.17

16.46 33.79 33.79

nr nr nr

95.95 115.43 117.66

108.03 116.83 138.53

123.77 133.85 158.71

0.72 1.13 1.29

20.80 32.64 37.26

nr nr nr

144.56 166.49 195.97

22.30 23.50 24.65 26.59 32.07 32.90

25.54 26.93 28.24 30.46 36.74 37.69

0.68 0.79 1.07 1.24 1.49 1.67

19.64 22.82 30.90 35.81 43.03 48.23

m m m m m m

45.18 49.74 59.14 66.27 79.78 85.93

45.09 47.79 53.56 62.95 70.82 75.41

51.65 54.75 61.36 72.12 81.13 86.39

0.34 0.39 0.43 0.61 0.82 0.97

9.82 11.26 12.42 17.62 23.68 28.02

nr nr nr nr nr nr

61.47 66.01 73.78 89.74 104.82 114.40

Extra over; (cutting and jointing racking to fittings is included) Inside 150 300 450 600

4 way 300 450 600

cross overs mm wide ladder mm wide ladder mm wide ladder

Heavy duty galvanised steel ladder rack; fixed to backgrounds; including supports, fixings and brackets; earth continuity straps Straight lengths 150 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

ladder ladder ladder ladder ladder ladder

Extra over; (cutting and jointing racking to fittings is included) Flat bend 150 mm 300 mm 450 mm 600 mm 750 mm 900 mm

wide wide wide wide wide wide

ladder ladder ladder ladder ladder ladder

Material Costs/Prices for Measured Works – Electrical Installations

542

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CABLE SUPPORTS – cont'd LADDER RACK – cont'd Extra over – cont'd Inside 150 300 450 600 750 900

riser bend mm wide ladder mm wide ladder mm wide ladder mm wide ladder mm wide ladder mm wide ladder

61.96 62.86 67.95 75.83 78.31 84.72

70.99 72.02 77.84 86.88 89.72 97.06

0.27 0.45 0.65 0.81 0.92 1.06

7.80 13.00 18.77 23.39 26.57 30.62

nr nr nr nr nr nr

78.78 85.02 96.62 110.27 116.29 127.68

Outside riser bend 150 mm wide ladder 300 mm wide ladder 450 mm wide ladder 600 mm wide ladder 750 mm wide ladder 900 mm wide ladder

61.96 62.86 67.95 75.83 78.31 85.24

70.99 72.02 77.84 86.88 89.72 97.66

0.27 0.33 0.61 0.76 0.94 1.05

7.80 9.53 17.62 21.95 27.15 30.33

nr nr nr nr nr nr

78.78 81.55 95.46 108.83 116.87 127.98

Equal tee 150mm wide ladder 300 mm wide ladder 450 mm wide ladder 600 mm wide ladder 750 mm wide ladder 900 mm wide ladder

68.44 79.71 86.37 100.40 127.05 127.67

78.41 91.32 98.95 115.02 145.56 146.26

0.37 0.57 0.83 0.92 1.13 1.20

10.69 16.46 23.97 26.57 32.64 34.66

nr nr nr nr nr nr

89.09 107.78 122.93 141.59 178.19 180.92

Unequal tee 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

ladder ladder ladder ladder ladder

75.97 74.29 83.50 88.54 111.24

87.03 85.11 95.66 101.44 127.45

0.57 1.17 1.17 1.25 1.33

16.46 33.79 33.79 36.10 38.41

nr nr nr nr nr

103.50 118.90 129.46 137.54 165.86

cross overs mm wide ladder mm wide ladder mm wide ladder mm wide ladder mm wide ladder mm wide ladder

107.80 113.52 141.87 158.60 166.39 197.58

123.51 130.05 162.53 181.70 190.62 226.36

0.50 0.67 0.92 1.07 1.25 1.36

14.44 19.35 26.57 30.90 36.10 39.28

nr nr nr nr nr nr

137.95 149.40 189.10 212.60 226.73 265.64

26.36 27.66 29.03 29.42 29.51 30.79

30.20 31.69 33.25 33.71 33.81 35.28

0.63 0.70 0.83 0.89 1.22 1.44

18.20 20.22 23.97 25.71 35.24 41.59

m m m m m m

48.40 51.90 57.23 59.42 69.04 76.87

4 way 150 300 450 600 750 900

Extra heavy duty galvanised steel ladder rack; fixed to backgrounds; including supports, fixings and brackets; earth continuity straps. Straight lengths 150 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

ladder ladder ladder ladder ladder ladder

Material Costs/Prices for Measured Works – Electrical Installations

543

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra over; (cutting and jointing racking to fittings is included) Flat bend 150 mm wide ladder 300 mm wide ladder 450 mm wide ladder 600 mm wide ladder 750 mm wide ladder 900 mm wide ladder

57.23 59.56 64.30 72.75 78.87 85.01

65.56 68.23 73.67 83.35 90.36 97.39

0.36 0.39 0.43 0.61 0.82 0.97

10.40 11.26 12.42 17.62 23.68 28.02

nr nr nr nr nr nr

75.96 79.50 86.09 100.97 114.04 125.41

Inside 150 300 450 600 750 900

riser bend mm wide ladder mm wide ladder mm wide ladder mm wide ladder mm wide ladder mm wide ladder

68.39 69.50 73.46 81.03 83.14 89.64

78.35 79.62 84.16 92.83 95.25 102.70

0.36 0.39 0.43 0.61 0.82 0.97

10.40 11.26 12.42 17.62 23.68 28.02

nr nr nr nr nr nr

88.75 90.89 96.58 110.45 118.93 130.71

Outside riser bend 150 mm wide ladder 300 mm wide ladder 450 mm wide ladder 600 mm wide ladder 750 mm wide ladder 900 mm wide ladder

68.58 69.50 73.46 81.03 83.14 89.64

78.56 79.62 84.16 92.83 95.25 102.70

0.36 0.39 0.41 0.57 0.82 0.93

10.40 11.26 11.84 16.46 23.68 26.86

nr nr nr nr nr nr

88.96 90.89 96.00 109.29 118.93 129.56

Equal tee 150 mm 300 mm 450 mm 600 mm 750 mm 900 mm

wide wide wide wide wide wide

ladder ladder ladder ladder ladder ladder

82.66 91.26 96.66 108.94 131.68 131.90

94.70 104.55 110.74 124.81 150.86 151.11

0.37 0.57 0.83 0.92 1.13 1.20

10.69 16.46 23.97 26.57 32.64 34.66

nr nr nr nr nr nr

105.38 121.01 134.72 151.38 183.50 185.77

Unequal tee 150 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

ladder ladder ladder ladder ladder ladder

85.11 93.73 99.14 111.54 131.68 137.09

97.51 107.39 113.58 127.79 452.59 157.06

0.37 0.57 1.17 1.17 1.25 1.33

10.69 16.46 33.79 33.79 36.10 38.41

nr nr nr nr nr nr

108.20 123.85 147.37 161.58 488.69 195.48

Material Costs/Prices for Measured Works – Electrical Installations

544

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CABLE SUPPORTS – cont'd LADDER RACK – cont'd Extra over – cont'd 4 way 150 300 450 600 750 900

cross overs mm wide ladder mm wide ladder mm wide ladder mm wide ladder mm wide ladder mm wide ladder

114.94 119.45 139.74 155.35 161.48 168.74

131.69 136.85 160.10 177.98 185.00 193.32

0.50 0.67 0.92 1.07 1.25 1.36

14.44 19.35 26.57 30.90 36.10 39.28

nr nr nr nr nr nr

146.13 156.20 186.67 208.89 221.10 232.60

2.17 2.10 2.33 2.96 4.55 9.06 11.09 15.10 19.18 23.90

2.49 2.41 2.67 3.39 5.21 10.38 12.71 17.30 21.97 27.38

0.19 0.23 0.31 0.33 0.39 0.49 0.60 0.79 1.04 1.26

5.49 6.64 8.95 9.53 11.26 14.15 17.33 22.82 30.04 36.39

m m m m m m m m m m

7.97 9.05 11.62 12.92 16.47 24.53 30.04 40.12 52.01 63.78

Straight reducer 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

6.76 7.44 9.88 12.60 16.24 17.99 21.81 27.82 32.32

7.75 8.52 11.32 14.44 18.60 20.62 24.99 31.87 37.02

0.22 0.25 0.27 0.34 0.39 0.49 0.54 0.61 0.69

6.35 7.22 7.80 9.82 11.26 14.15 15.60 17.62 19.93

nr nr nr nr nr nr nr nr nr

14.10 15.74 19.12 24.26 29.87 34.77 40.58 49.49 56.95

Flat bend; 90° 50mm wide 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide

4.62 4.73 5.53 5.74 7.94 10.82

5.29 5.42 6.34 6.57 9.10 12.40

0.19 0.24 0.28 0.30 0.36 0.44

5.49 6.93 8.09 8.66 10.40 12.71

nr nr nr nr nr nr

10.78 12.35 14.42 15.24 19.50 25.11

CABLE TRAY Galvanised steel cable tray to BS 729; including standard coupling joints, fixings and earth continuity straps (Supports and hangers are excluded) Light duty tray Straight lengths 50 mm wide 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide Extra over; (cutting and jointing tray to fittings is included)

Material Costs/Prices for Measured Works – Electrical Installations

545

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

450 600 750 900

Net Price £

mm mm mm mm

Material £

Labour hours

Labour £

Unit

Total rate £

wide wide wide wide

12.39 19.35 27.40 40.30

14.20 22.16 31.40 46.17

0.57 0.69 0.81 0.94

16.46 19.93 23.39 27.15

nr nr nr nr

30.66 42.09 54.79 73.32

Adjustable riser 50 mm wide 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

8.35 9.13 10.06 12.82 15.76 19.97 18.12 22.92 29.49 34.71

9.57 10.46 11.52 14.68 18.05 22.88 20.76 26.26 33.78 39.77

0.26 0.29 0.32 0.36 0.44 0.52 0.66 0.79 1.03 1.10

7.51 8.38 9.24 10.40 12.71 15.02 19.06 22.82 29.75 31.77

nr nr nr nr nr nr nr nr nr nr

17.08 18.84 20.76 25.08 30.76 37.90 39.82 49.08 63.53 71.54

Inside riser; 90° 50 mm wide 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

6.70 7.06 7.62 10.06 12.72 17.26 17.14 22.86 28.20 33.51

7.67 8.08 16.81 11.52 14.57 19.77 19.64 26.20 32.31 38.39

0.28 0.31 0.33 0.37 0.44 0.53 0.67 0.79 0.95 1.11

8.09 8.95 9.53 10.69 12.71 15.31 19.35 22.82 27.44 32.06

nr nr nr nr nr nr nr nr nr nr

15.76 17.04 26.34 22.21 27.28 35.08 38.99 49.01 59.75 70.45

Outside riser; 90° 50 mm wide 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

6.70 7.06 7.62 10.06 12.72 17.26 17.14 22.86 28.20 53.57

7.67 8.08 8.73 11.52 14.57 19.77 19.64 26.20 32.31 61.37

0.28 0.31 0.33 0.37 0.44 0.53 0.67 0.79 0.95 1.11

8.09 8.95 9.53 10.69 12.71 15.31 19.35 22.82 27.44 32.06

nr nr nr nr nr nr nr nr nr nr

15.76 17.04 18.26 22.21 27.28 35.08 38.99 49.01 59.75 93.43

Equal tee 50 mm wide 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

6.66 6.91 7.50 8.35 11.56 14.46 18.57 25.53 38.26 54.42

7.63 7.92 8.59 9.57 13.24 16.57 21.28 29.24 43.83 62.34

0.30 0.31 0.35 0.36 0.74 0.54 0.71 0.92 1.19 1.44

8.66 8.95 10.11 10.40 21.37 15.60 20.51 26.57 34.37 41.59

nr nr nr nr nr nr nr nr nr nr

16.29 16.87 18.70 19.97 34.61 32.16 41.78 55.82 78.20 103.93

546

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CABLE SUPPORTS – cont'd CABLE TRAY – cont'd Extra over – cont'd Unequal tee 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

6.91 7.50 8.35 11.56 14.46 18.57 25.53 38.26 54.42

7.92 8.59 9.57 13.24 16.57 21.28 29.24 43.83 62.34

0.38 0.39 0.43 0.50 0.63 0.80 1.02 1.12 1.35

10.98 11.26 12.42 14.44 18.20 23.11 29.46 32.35 38.99

nr nr nr nr nr nr nr nr nr

18.89 19.86 21.99 27.68 34.76 44.38 58.70 76.18 101.33

4 way crossovers 50 mm wide 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

9.26 9.44 10.36 11.62 15.48 22.01 25.46 34.03 51.23 74.66

10.61 10.82 11.86 13.31 17.73 25.21 29.17 38.99 58.69 85.53

0.38 0.40 0.40 0.44 0.53 0.64 0.84 1.03 1.13 1.36

10.98 11.55 11.55 12.71 15.31 18.48 24.26 29.75 32.64 39.28

nr nr nr nr nr nr nr nr nr nr

21.59 22.37 23.42 26.02 33.04 43.70 53.43 68.74 91.33 124.81

4.01 4.29 5.35 6.38 8.86 13.58 18.98

4.59 4.91 6.13 7.31 10.15 15.56 21.74

0.33 0.35 0.39 0.45 0.57 0.69 0.91

9.53 10.11 11.26 13.00 16.46 19.93 26.28

m m m m m m m

14.13 15.02 17.39 20.31 26.61 35.49 48.03

12.77 13.95 16.07 18.61 24.04 29.79

14.62 15.98 18.41 21.32 27.54 34.12

0.25 0.27 0.34 0.39 0.49 0.54

7.22 7.80 9.82 11.26 14.15 15.60

nr nr nr nr nr nr

21.84 23.78 28.23 32.58 41.69 49.72

Medium duty tray with return flange Straight lengths 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide Extra over; (cutting and jointing tray to fittings is included) Straight reducer 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide

Material Costs/Prices for Measured Works – Electrical Installations

547

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Flat bend; 90° 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide

17.02 18.95 20.11 23.21 28.62 43.00 51.99

19.50 21.71 23.04 26.59 32.79 49.26 59.56

0.24 0.28 0.30 0.36 0.44 0.57 0.69

6.93 8.09 8.66 10.40 12.71 16.46 19.93

nr nr nr nr nr nr nr

26.43 29.80 31.71 36.98 45.50 65.72 79.49

Adjustable bend 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide

19.46 21.18 24.22 27.15 30.67

22.29 24.27 27.75 31.11 35.14

0.29 0.32 0.36 0.44 0.52

8.38 9.24 10.40 12.71 15.02

nr nr nr nr nr

30.67 33.51 38.14 43.81 50.16

Adjustable riser 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide

17.36 17.65 19.45 20.63 22.00 28.85 35.39

19.89 20.22 22.28 23.64 25.20 33.06 40.54

0.29 0.32 0.36 0.44 0.52 0.66 0.79

8.38 9.24 10.40 12.71 15.02 19.06 22.82

nr nr nr nr nr nr nr

28.27 29.47 32.68 36.34 40.22 52.12 63.36

Inside riser; 90° 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide

10.43 10.53 11.99 14.65 17.80 25.70 41.23

11.95 12.06 13.74 16.79 20.39 29.44 47.23

0.31 0.33 0.37 0.44 0.53 0.67 0.79

8.95 9.53 10.69 12.71 15.31 19.35 22.82

nr nr nr nr nr nr nr

20.90 21.59 24.42 29.49 35.70 48.79 70.05

Outside riser; 90° 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide

10.43 10.53 11.99 14.65 17.80 25.70 41.23

11.95 12.06 13.74 16.79 20.39 29.44 47.23

0.31 0.33 0.37 0.44 0.53 0.67 0.79

8.95 9.53 10.69 12.71 15.31 19.35 22.82

nr nr nr nr nr nr nr

20.90 21.59 24.42 29.49 35.70 48.79 70.05

Equal tee 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide

23.18 24.72 26.61 28.92 35.09 46.23 66.42

26.55 28.32 30.48 33.13 40.20 52.97 76.09

0.31 0.35 0.36 0.74 0.54 0.71 0.92

8.95 10.11 10.40 21.37 15.60 20.51 26.57

nr nr nr nr nr nr nr

35.51 38.43 40.88 54.50 55.80 73.47 102.66

Unequal tee 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide

24.72 24.72 28.92 35.09 46.23 66.42

28.32 28.32 33.13 40.20 52.97 76.09

0.39 0.43 0.50 0.63 0.80 1.02

11.26 12.42 14.44 18.20 23.11 29.46

nr nr nr nr nr nr

39.58 40.74 47.57 58.40 76.07 105.55

548

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CABLE SUPPORTS – cont'd CABLE TRAY – cont'd Extra over – cont'd 4 way crossovers 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide

32.87 35.43 30.79 44.52 51.80 65.93 96.11

37.66 40.59 35.27 51.00 59.34 75.54 110.11

0.40 0.40 0.44 0.53 0.64 0.84 1.03

11.55 11.55 12.71 15.31 18.48 24.26 29.75

nr nr nr nr nr nr nr

49.21 52.14 47.98 66.31 77.83 99.80 139.86

7.57 8.07 9.33 10.46 12.75 19.27 23.36 29.47 32.59

8.67 9.25 10.69 11.98 14.61 22.08 26.77 33.76 37.34

0.34 0.36 0.40 0.46 0.58 0.70 0.92 1.01 1.14

9.82 10.40 11.55 13.29 16.75 20.22 26.57 29.17 32.93

m m m m m m m m m

18.49 19.65 22.24 25.27 31.36 42.30 53.34 62.93 70.27

Straight reducer 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

20.02 20.79 23.61 26.32 37.64 41.85 53.08 58.22

22.94 23.82 27.04 30.16 43.13 47.95 60.81 66.70

0.25 0.27 0.34 0.39 0.49 0.54 0.60 0.66

7.22 7.80 9.82 11.26 14.15 15.60 17.33 19.06

nr nr nr nr nr nr nr nr

30.16 31.62 36.86 41.42 57.28 63.55 78.14 85.77

Flat bend; 90° 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

22.40 25.46 27.14 30.69 34.97 51.27 68.53 91.83 104.14

25.66 29.17 31.09 35.16 40.06 58.74 78.51 105.20 119.31

0.24 0.28 0.30 0.36 0.44 0.57 0.69 0.83 1.01

6.93 8.09 8.66 10.40 12.71 16.46 19.93 23.97 29.17

nr nr nr nr nr nr nr nr nr

32.59 37.26 39.75 45.56 52.77 75.20 98.44 129.18 148.48

Heavy duty tray with return flange Straight lengths 75 mm 100 mm 150 mm 225 mm 300 mm 450 mm 600 mm 750 mm 900 mm Extra over; (cutting and jointing tray to fittings is included)

Material Costs/Prices for Measured Works – Electrical Installations

549

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Adjustable bend 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide

23.29 25.76 27.21 29.95 33.53

26.68 29.51 31.18 34.32 38.41

0.29 0.32 0.36 0.44 0.52

8.38 9.24 10.40 12.71 15.02

nr nr nr nr nr

35.05 38.76 41.58 47.02 53.43

Adjustable riser 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

20.53 21.34 23.63 25.31 27.41 33.36 39.75 48.13 55.88

23.52 24.45 27.07 29.00 31.40 38.22 45.54 55.14 64.02

0.29 0.32 0.36 0.44 0.52 0.66 0.79 1.03 1.10

8.38 9.24 10.40 12.71 15.02 19.06 22.82 29.75 31.77

nr nr nr nr nr nr nr nr nr

31.89 33.69 37.47 41.71 46.42 57.29 68.36 84.88 95.79

Inside riser; 90° 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

17.17 17.39 18.84 19.70 20.32 34.85 42.76 52.92 62.39

19.67 19.92 21.59 22.57 23.28 39.92 48.99 60.63 71.48

0.31 0.33 0.37 0.44 0.53 0.67 0.79 0.95 1.11

8.95 9.53 10.69 12.71 15.31 19.35 22.82 27.44 32.06

nr nr nr nr nr nr nr nr nr

28.63 29.46 32.27 35.28 38.58 59.28 71.80 88.07 103.54

Outside riser; 90° 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

17.17 17.39 18.84 19.70 20.32 34.85 42.76 52.92 62.39

19.67 19.92 21.59 22.57 23.28 39.92 48.99 60.63 71.48

0.31 0.33 0.37 0.44 0.53 0.67 0.79 0.95 1.11

8.95 9.53 10.69 12.71 15.31 19.35 22.82 27.44 32.06

nr nr nr nr nr nr nr nr nr

28.63 29.46 32.27 35.28 38.58 59.28 71.80 88.07 103.54

29.91 33.43 36.61 42.13 45.55 66.14 87.33 115.17 131.52

34.27 38.30 41.94 48.27 52.19 75.78 100.05 131.95 150.67

0.31 0.35 0.36 0.74 0.54 0.71 0.92 1.19 1.45

8.95 10.11 10.40 21.37 15.60 20.51 26.57 34.37 41.88

nr nr nr nr nr nr nr nr nr

43.22 48.41 52.34 69.64 67.78 96.28 126.62 166.32 192.55

Equal tee 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

550

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CABLE SUPPORTS – cont'd CABLE TRAY – cont'd Extra over – cont'd Unequal tee 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

29.91 33.40 36.61 42.13 45.55 66.14 87.33 115.17 139.30

34.27 38.26 41.94 48.27 52.19 75.78 100.05 131.95 159.60

0.38 0.39 0.43 0.50 0.63 0.80 1.02 1.12 1.35

10.98 11.26 12.42 14.44 18.20 23.11 29.46 32.35 38.99

nr nr nr nr nr nr nr nr nr

45.24 49.52 54.36 62.71 70.38 98.88 129.51 164.29 198.59

4 way crossovers 75 mm wide 100 mm wide 150 mm wide 225 mm wide 300 mm wide 450 mm wide 600 mm wide 750 mm wide 900 mm wide

30.35 43.49 43.49 60.48 66.69 95.93 130.38 159.02 191.82

34.77 49.83 49.83 69.29 76.41 109.90 149.38 182.18 219.76

0.40 0.40 0.44 0.53 0.64 0.84 1.03 1.13 1.36

11.55 11.55 12.71 15.31 18.48 24.26 29.75 32.64 39.28

nr nr nr nr nr nr nr nr nr

46.32 61.38 62.54 84.60 94.89 134.17 179.12 214.82 259.04

Tray 100 mm wide 200 mm wide 400 mm wide

22.53 28.84 45.23

25.81 33.04 51.81

0.34 0.39 0.53

9.82 11.26 15.31

m m m

35.63 44.30 67.12

Cover 100 mm wide 200 mm wide 400 mm wide

12.69 16.81 28.71

14.54 19.26 32.90

0.10 0.11 0.14

2.89 3.18 4.04

m m m

17.43 22.44 36.94

Reducer 200 mm wide 400 mm wide

59.86 78.21

68.58 89.61

0.23 0.30

6.64 8.66

nr nr

75.23 98.27

Reducer cover 200 mm wide 400 mm wide

37.46 54.76

42.92 62.74

0.25 0.28

7.22 8.09

nr nr

50.14 70.83

GRP cable tray including standard coupling joints and fixings; (supports and hangers excluded)

Extra for; (cutting and jointing to fittings included)

Material Costs/Prices for Measured Works – Electrical Installations

551

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Bend 100 mm wide 200 mm wide 400 mm wide

50.06 58.11 74.67

57.35 66.57 85.55

0.34 0.40 0.32

9.82 11.55 9.24

nr nr nr

67.17 78.13 94.79

Bend cover 100 mm wide 200 mm wide 400 mm wide

24.87 33.22 45.91

28.49 38.06 52.60

0.10 0.10 0.13

2.89 2.89 3.75

nr nr nr

31.38 40.95 56.35

Tee 100 mm wide 200 mm wide 400 mm wide

63.72 70.24 87.14

73.00 80.47 99.83

0.37 0.43 0.56

10.69 12.42 16.17

nr nr nr

83.69 92.89 116.01

Tee cover 100 mm wide 200 mm wide 400 mm wide

32.09 38.64 54.50

36.76 44.27 62.44

0.27 0.31 0.37

7.80 8.95 10.69

nr nr nr

44.56 53.22 73.12

3.05 3.40 3.72 4.36 5.29 6.47

3.49 3.90 4.27 5.00 6.06 7.41

0.22 0.25 0.28 0.34 0.44 0.70

6.35 7.22 8.09 9.82 12.71 20.22

m m m m m m

9.85 11.12 12.35 14.82 18.77 27.63

BASKET TRAY Mild Steel Cable Basket; Zinc Plated Including Standard Coupling Joints, Fixings and Earth Continuity Straps (supports and hangers are excluded) Basket 54mm deep 100 mm wide 150 mm wide 200 mm wide 300 mm wide 450 mm wide 600 mm wide Extra for; (cutting and jointing to fittings is included) Reducer 150 mm 200 mm 300 mm 450 mm 600 mm

wide wide wide wide wide

10.81 12.68 12.89 14.15 17.63

12.39 14.53 14.77 16.22 20.20

0.25 0.28 0.38 0.48 0.48

7.22 8.09 10.98 13.86 13.86

nr nr nr nr nr

19.61 22.62 25.74 30.08 34.06

Bend 100 150 200 300 450 600

wide wide wide wide wide wide

10.33 12.10 12.31 13.47 16.78 19.75

11.83 13.87 14.11 15.43 19.22 22.63

0.23 0.26 0.30 0.35 0.50 0.58

6.64 7.51 8.66 10.11 14.44 16.75

nr nr nr nr nr nr

18.47 21.38 22.77 25.54 33.66 39.38

mm mm mm mm mm mm

Material Costs/Prices for Measured Works – Electrical Installations

552

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd CABLE SUPPORTS – cont'd BASKET TRAY – cont'd Extra for – cont'd Tee 100 150 200 300 450 600

mm mm mm mm mm mm

wide wide wide wide wide wide

12.98 13.77 14.05 17.67 23.15 23.94

14.87 15.77 16.10 20.24 26.52 27.43

0.28 0.30 0.33 0.39 0.56 0.65

8.09 8.66 9.53 11.26 16.17 18.77

nr nr nr nr nr nr

22.95 24.44 25.63 31.51 42.70 46.20

Cross over 100 mm wide 150 mm wide 200 mm wide 300 mm wide 450 mm wide 600 mm wide

17.70 18.01 19.56 22.22 26.04 26.89

20.28 20.64 22.41 25.46 29.83 30.80

0.40 0.42 0.46 0.51 0.74 0.82

11.55 12.13 13.29 14.73 21.37 23.68

nr nr nr nr nr nr

31.83 32.77 35.70 40.19 51.21 54.48

7.40 8.37 9.32 10.58 13.06 14.87

8.48 9.59 10.68 12.12 14.97 17.03

0.22 0.25 0.28 0.34 0.44 0.70

6.35 7.22 8.09 9.82 12.71 20.22

m m m m m m

14.83 16.81 18.76 21.94 27.67 37.25

Mild steel cable basket; expoxy coated including standard coupling joints, fixings and earth continuity straps (supports and hangers are excluded) Basket 54mm deep 100 mm wide 150 mm wide 200 mm wide 300 mm wide 450 mm wide 600 mm wide Extra for; (cutting and jointing to fittings is included) Reducer 150 mm 200 mm 300 mm 450 mm 600 mm

wide wide wide wide wide

15.47 17.34 18.49 21.62 26.95

17.72 19.86 21.18 24.77 30.88

0.28 0.28 0.38 0.48 0.48

8.09 8.09 10.98 13.86 13.86

nr nr nr nr nr

25.81 27.95 32.16 38.63 44.74

Bend 100 150 200 300 450 600

wide wide wide wide wide wide

15.00 16.77 16.98 19.09 24.23 29.09

17.19 19.21 19.45 21.88 27.76 33.33

0.23 0.26 0.30 0.35 0.50 0.58

6.64 7.51 8.66 10.11 14.44 16.75

nr nr nr nr nr nr

23.83 26.72 28.11 31.99 42.21 50.08

mm mm mm mm mm mm

Material Costs/Prices for Measured Works – Electrical Installations

553

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Tee 100 150 200 300 450 600

Net Price £

mm mm mm mm mm mm

Material £

Labour hours

Labour £

Unit

Total rate £

wide wide wide wide wide wide

17.64 18.44 18.72 23.27 29.66 33.26

20.21 21.13 21.45 26.67 33.98 38.10

0.28 0.30 0.33 0.39 0.56 0.65

8.09 8.66 9.53 11.26 16.17 18.77

nr nr nr nr nr nr

28.30 29.79 30.98 37.93 50.15 56.88

Cross over 100 mm wide 150 mm wide 200 mm wide 300 mm wide 450 mm wide 600 mm wide

22.37 22.62 24.23 27.82 33.51 36.20

25.63 25.91 27.76 31.87 38.39 41.48

0.40 0.42 0.46 0.51 0.74 0.82

11.55 12.13 13.29 14.73 21.37 23.68

nr nr nr nr nr nr

37.18 38.04 41.05 46.60 59.76 65.16

29552.71 22331.26 18734.23 12647.49 9829.66 7663.05 6273.99 5552.92 5485.83 5393.04 26777.38 18778.95 15377.55 10559.71 8454.57 6366.23 5175.59 4812.25 4708.85 4618.84

33857.48 25584.12 21463.13 14489.78 11261.49 8779.28 7187.88 6361.78 6284.92 6178.61 30677.88 21514.37 17617.50 12097.88 9686.10 7293.56 5929.49 5513.23 5394.76 5291.64

-

-

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

33857.48 25584.12 21463.13 14489.78 11261.49 8779.28 7187.88 6361.78 6284.92 6178.61 30677.88 21514.37 17617.50 12097.88 9686.10 7293.56 5929.49 5513.23 5394.76 5291.64

Y71 – LV SWITCHGEAR & DISTRIBUTION BOARDS LV switchboard components, factory-assembled modular construction to IP41; form 4, type 5; 2400mm high, with front and rear access; top cable entry/exit; includes delivery, offloading, positioning and commissioning (hence separate labour costs are not detailed below); excludes cabling and cable terminations Air circuit breakers (ACBs) to BSEN 60947-2, withdrawable type, fitted with adjustable instantaneous and overload protection. Includes enclosure and copper links, assembled into LV switchboard. ACB-100 4 pole, 4 pole, 4 pole, 4 pole, 4 pole, 4 pole, 4 pole, 4 pole, 4 pole, 4 pole, 3 pole, 3 pole, 3 pole, 3 pole, 3 pole, 3 pole, 3 pole, 3 pole, 3 pole, 3 pole,

kA fault rated 6300 A (1600mm wide) 5000 A (1600mm wide) 4000 A (1600mm wide) 3200 A (1600mm wide) 2500 A (1600mm wide) 2000 A (1600mm wide) 1600 A (1600mm wide) 1250 A (1600mm wide) 1000 A (1600mm wide) 800 A (1600mm wide) 6300 A (1600mm wide) 5000 A (1600mm wide) 4000 A (1600mm wide) 3200 A (1600mm wide) 2500 A (1600mm wide) 2000 A (1600mm wide) 1600 A (1600mm wide) 1250 A (1600mm wide) 1000 A (1600mm wide) 800 A (1600mm wide)

554

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

16439.62 11121.48 8742.45 6953.14 5737.36 5122.49 5024.67 4934.68 13926.99 9444.53 7345.00 5837.99 4775.93 4446.13 4345.52 4255.52

18834.28 12741.48 10015.91 7965.96 6573.09 5868.65 5756.59 5653.49 15955.65 10820.26 8414.90 6688.37 5471.61 5093.77 4978.50 4875.39

-

276.10 82.37 82.37 161.80 500.14 470.73

316.32 94.37 94.37 185.37 572.99 539.29

117.68 235.35 58.84

2786.40 1993.46 1782.75 1211.59 1009.21 2486.98 1899.18 1530.44 1120.11 895.53

Labour £

Unit

Total rate £

-

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

18834.28 11121.48 10015.91 7965.96 6573.09 5868.65 5756.59 5653.49 15955.65 10820.26 8414.90 6688.37 5471.61 5093.77 4978.50 4875.39

-

-

nr nr nr nr nr nr

316.32 94.37 94.37 185.37 572.99 539.29

134.82 269.64 67.41

-

-

nr nr nr

134.82 269.64 67.41

3192.28 2283.84 2042.43 1388.08 1156.22 2849.24 2175.83 1753.37 1283.27 1025.97

-

-

nr nr nr nr nr nr nr nr nr nr

3192.28 2283.84 2042.43 1388.08 1156.22 2849.24 2175.83 1753.37 1283.27 1025.97

V20: LV DISTRIBUTION – cont'd LV SWITCHGEAR & DISTRIBUTION BOARDS – cont'd LV switchboard components – cont'd ACB-65 kA fault rated 4 pole, 4000 A (1600mm wide) 4 pole, 3200 A (1600mm wide) 4 pole, 2500 A (1600mm wide) 4 pole, 2000 A (1600mm wide) 4 pole, 1600 A (1600mm wide) 4 pole, 1250 A (1600mm wide) 4 pole, 1000 A (1600mm wide) 4 pole, 800 A (1600mm wide) 3 pole, 4000 A (1600mm wide) 3 pole, 3200 A (1600mm wide) 3 pole, 2500 A (1600mm wide) 3 pole, 2000 A (1600mm wide) 3 pole, 1600 A (1600mm wide) 3 pole, 1250 A (1600mm wide) 3 pole, 1000 A (1600mm wide) 3 pole, 800 A (1600mm wide) Extra for Cable box (one per ACB for form 4, types 6 & 7) Opening Coil Closing Coil Undervoltage Release Motor Operator Mechnical Interlock (per ACB) ACB Fortress/Castell Adaptor Kit (one per ACB) Fortress/Castell ACB Lock (one per ACB) Fortress/Castell Key Moulded case circuit breakers (MCCBs) to BS EN 60947-2; plug-in type, fitted with electronic trip unit. Includes metalwork section and copper links, assembled into LV switchboard MCCB-150 kA fault rated 4 Pole, 630 A (800mm wide, 4 Pole, 400 A (800mm wide, 4 Pole, 250 A (800mm wide, 4 Pole, 160 A (800mm wide, 4 Pole, 100 A (800mm wide, 3 Pole, 630 A (800mm wide, 3 Pole, 400 A (800mm wide, 3 Pole, 250 A (800mm wide, 3 Pole, 160 A (800mm wide, 3 Pole, 100 A (800mm wide,

600mm 400mm 400mm 300mm 200mm 600mm 400mm 400mm 300mm 200mm

high) high) high) high) high) high) high) high) high) high)

Material Costs/Prices for Measured Works – Electrical Installations

555

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

MCCB-70kA fault rated 4 Pole, 630 A (800mm 4 Pole, 400 A (800mm 4 Pole, 250 A (800mm 4 Pole, 160 A (800mm 4 Pole, 100 A (800mm 3 Pole, 630 A (800mm 3 Pole, 400 A (800mm 3 Pole, 250 A (800mm 3 Pole, 160 A (800mm 3 Pole, 100 A (800mm

wide, wide, wide, wide, wide, wide, wide, wide, wide, wide,

600mm 400mm 400mm 300mm 200mm 600mm 400mm 400mm 300mm 200mm

high) high) high) high) high) high) high) high) high) high)

2387.16 1641.34 1411.22 1059.10 798.49 2090.50 1416.77 1250.42 923.25 679.27

2734.88 1880.43 1616.78 1213.37 914.81 2395.01 1623.15 1432.56 1057.73 778.21

-

-

nr nr nr nr nr nr nr nr nr nr

2734.88 1880.43 1616.78 1213.37 914.81 2395.01 1623.15 1432.56 1057.73 778.21

MCCB-45kA fault rated 4 Pole, 630 A (800mm 4 Pole, 400 A (800mm 3 Pole, 630 A (800mm 3 Pole, 400 A (800mm

wide, wide, wide, wide,

600mm 400mm 600mm 400mm

high) high) high) high)

2315.07 1591.45 2001.78 1364.09

2652.30 1823.27 2293.37 1562.78

-

-

nr nr nr nr

2652.30 1823.27 2293.37 1562.78

MCCB-36kA fault rated 4 Pole, 250 A (800mm 4 Pole, 160 A (800mm 3 Pole, 250 A (800mm 3 Pole, 160 A (800mm

wide, wide, wide, wide,

400mm 300mm 400mm 300mm

high) high) high) high)

1350.23 1023.06 766.92 675.36

1546.92 1172.09 878.63 773.73

-

-

nr nr nr nr

1546.92 1172.09 878.63 773.73

116.74 40.86 58.38 554.51 554.51 461.12 294.77 72.97 58.38 437.77

133.74 46.81 66.88 635.28 635.28 528.29 337.70 83.60 66.88 501.54

-

-

nr nr nr nr nr nr nr nr nr nr

133.74 46.81 66.88 635.28 635.28 528.29 337.70 83.60 66.88 501.54

2262.58 1860.35 1860.35 1291.55 1090.45 801.33 581.35 455.65 455.65 355.09 355.09 304.58

2592.15 2131.33 2131.33 1479.69 1249.29 918.05 666.03 522.02 522.02 406.81 406.81 348.95

-

-

nr nr nr nr nr nr nr nr nr nr nr nr

2592.15 2131.33 2131.33 1479.69 1249.29 918.05 666.03 522.02 522.02 406.81 406.81 348.95

Extra for Cable box (one per MCCB for form 4, types 6 & 7) Shunt trip (for ratings 100A to 630A) Undervoltage release (for ratings 100A to 630A) Motor operator for 630A MCCB Motor operator for 400A MCCB Motor operator for 250A MCCB Motor operator for 160A/100A MCCB Door handle for 630/400A MCCB Door handle for 250/160/100A MCCB MCCB earth fault protection LV Switchboard busbar Copper busbar assembled into LV switchboard, ASTA type tested to appropriate fault level. Busbar Length may be estimated by adding the widths of the ACB sections to the width of the MCCB sections. ACB's up to 2000A rating may be stacked two high; larger ratings are one per section. To determine the number of MCCB sections, add together all the MCCB heights and divide by 1800mm, rounding up as necessary 6000 A (6 x 10mm x 100mm) 5000 A (4 x 10mm x 100mm) 4000 A (4 x 10mm x 100mm) 3200 A (3 x 10mm x 100mm) 2500 A (2 x 10mm x 100mm) 2000 A (2 x 10mm x 80mm) 1600 A (2 x 10mm x 50mm) 1250 A (2 x 10mm x 40mm) 1000 A (2 x 10mm x 30mm) 800 A (2 x 10mm x 20mm) 630 A (2 x 10mm x 20mm) 400 A (2 x 10mm x 10mm)

556

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Standard PFC (no de-tuning) 100 kVAr 200 kVAr 400 kVAr 600 kVAr

4435.89 6204.05 10590.67 14507.10

5082.04 7107.76 12133.35 16620.26

-

PFC with de-tuning reactors 100 kVAr 200 kVAr 400 kVAr 600 kVAr

7217.64 10086.67 17383.16 25563.73

8268.99 11555.94 19915.26 29287.45

-

Panel Mounting type 3 pole or 4 pole; overlapping neutral 100 amp 250amp 400amp 630amp 800amp 1000amp 1600amp 2000amp

2971.16 3968.93 5245.42 6740.17 9720.72 15464.77 16569.40 20356.69

3403.95 4547.06 6009.49 7721.97 11136.68 17717.43 18982.97 23321.93

2.60 3.30 4.30 5.30 5.50 5.83 6.20 6.90

Enclosed type 3 pole or 4 pole; over lapping neutral 63 amp 100 amp 125 amp 160 amp 250amp 400amp 630amp 800amp 1000amp 1250amp 1600amp 2000amp

2871.38 2971.16 3044.49 3189.48 3968.93 6241.22 8401.78 11598.09 17397.13 18846.89 20296.64 24147.14

3289.64 3403.95 3487.97 3654.07 4547.06 7150.34 9625.62 13287.51 19931.27 21592.20 23253.13 27664.51

2.60 2.60 2.90 2.90 3.30 4.30 4.84 5.12 5.50 6.00 6.20 6.90

Labour £

Unit

Total rate £

-

nr nr nr nr

5082.04 7107.76 12133.35 16620.26

-

nr nr nr nr

8268.99 11555.94 19915.26 29287.45

75.09 95.31 124.19 153.08 158.85 168.38 179.07 199.29

nr nr nr nr nr nr nr nr

3479.04 4642.37 6133.68 7875.04 11295.53 17885.81 19162.04 23521.22

75.09 75.09 83.76 83.76 95.31 124.19 139.79 147.88 158.85 173.29 179.07 199.29

nr nr nr nr nr nr nr nr nr nr nr nr

3364.73 3479.04 3571.73 3737.83 4642.37 7274.54 9765.41 13435.39 20090.12 21765.49 23432.20 27863.80

V20: LV DISTRIBUTION – cont'd LV SWITCHGEAR & DISTRIBUTION BOARDS – cont'd LV Switchboard busbar – cont'd Automatic power factor correction (PFC); floor standing steel enclosure to IP 42, complete with microprocessor based relay and status indication; includes delivery, offloading, positioning and commissioning; excludes cabling and cable terminations

AUTOMATIC TRANSFER SWITCHES Automatic transfer switches; steel enclosure; solenoid operating; programmable controller, keypad and LCD display; fixed to backgrounds; including commissioning and testing

Material Costs/Prices for Measured Works – Electrical Installations

557

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

29039.06 35545.30

33269.00 40722.97

6.90 6.90

199.29 199.29

nr nr

33468.29 40922.26

Enclosed type 3 pole or 4 pole; over lapping Neutral, with single By-Pass 63 amp 100 amp 125 amp 160 amp 250 amp 400 amp 630 amp 800 amp 1000 amp 1250 amp 1600 amp

5185.15 5335.44 5485.74 7890.45 10250.07 11497.51 23896.77 25249.42 47304.34 48106.91 20296.64

5940.44 6112.62 6284.81 9039.80 11743.13 13172.28 27377.67 28927.35 54194.88 55114.36 23253.13

2.60 2.60 2.90 2.90 3.30 4.30 4.84 5.12 5.50 6.00 6.20

75.09 75.09 83.76 83.76 95.31 124.19 139.79 147.88 158.85 173.29 179.07

nr nr nr nr nr nr nr nr nr nr nr

6015.54 6187.72 6368.57 9123.56 11838.44 13296.48 27517.46 29075.23 54353.73 55287.65 23432.20

Enclosed type 3 pole or 4 pole; over lapping Neutral, with Dual By-Pass 63 amp 100 amp 125 amp 160 amp 250 amp 400 amp 630 amp 800 amp 1000 amp 1250 amp 1600 amp

6100.18 6277.00 6453.80 9282.88 12058.90 13526.48 28113.85 29705.20 55652.17 56596.37 59801.60

6988.75 7191.33 7393.89 10635.06 13815.45 15496.80 32209.03 34032.18 63758.68 64840.42 68512.55

2.60 2.60 2.90 2.90 3.30 4.30 4.84 5.12 5.50 6.00 6.20

75.09 75.09 83.76 83.76 95.31 124.19 139.79 147.88 158.85 173.29 179.07

nr nr nr nr nr nr nr nr nr nr nr

7063.84 7266.42 7477.65 10718.81 13910.76 15620.99 32348.82 34180.06 63917.54 65013.71 68691.61

Up to 250A 4 Way TPN Extra over for integral incomer metering

837.47 857.74

959.46 982.68

1.00 1.50

28.88 43.32

nr nr

988.34 1026.01

Up to 630A 6 way TPN 12 way TPN 18 Way TPN Extra over for integral incomer metering

1506.50 1701.44 1980.59 1013.69

1725.94 1949.28 2269.10 1161.35

2.00 2.50 3.00 1.50

57.76 72.21 86.65 43.32

nr nr nr nr

1783.70 2021.48 2355.74 1204.67

Up to 800A 6 way TPN 12 way TPN 18 Way TPN Extra over for integral incomer metering

2577.90 3092.55 3292.16 1013.69

2953.41 3543.03 3771.71 1161.35

2.00 2.50 3.00 1.50

57.76 72.21 86.65 43.32

nr nr nr nr

3011.17 3615.23 3858.36 1204.67

Up to 1200A 20 Way TPN

6897.80

7902.56

3.50

101.09

nr

8003.64

3000amp 4000amp

BREAKERS / FUSES MCCB panelboards; IP4X construction, 50kA busbars and fully-rated neutral; fitted with doorlock, removable glandplate; form 3b Type2; BSEN 60439-1; including fixing to backgrounds Panelboards cubicle with MCCB incomer

558

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV SWITCHGEAR & DISTRIBUTION BOARDS – cont'd BREAKERS / FUSES – cont'd Panelboards cubicle with MCCB incomer – cont'd Up to 1600A 28 Way TPN

8932.97

10234.18

3.50

101.09

nr

10335.27

Up to 2000A 28Way TPN

9723.66

11140.05

4.00

115.53

nr

11255.57

Single Pole 32A 63A 100A 160A

70.74 72.35 73.95 78.78

81.05 82.89 84.73 90.26

0.75 0.75 0.75 1.00

21.66 21.66 21.66 28.88

nr nr nr nr

102.71 104.55 106.39 119.14

Double pole 32A 63A 100A 160A

106.11 107.71 157.56 196.14

121.56 123.40 180.52 224.71

0.75 0.75 0.75 1.00

21.66 21.66 21.66 28.88

nr nr nr nr

143.22 145.06 202.18 253.59

Triple pole 32A 63A 100A 160A 250A 400A 630A

141.49 144.69 188.10 242.77 364.96 493.58 810.32

162.10 165.77 215.50 278.13 418.12 565.48 928.35

0.75 0.75 0.75 1.00 1.00 1.25 1.50

21.66 21.66 21.66 28.88 28.88 36.10 43.32

nr nr nr nr nr nr nr

183.77 187.43 237.16 307.01 447.00 601.58 971.67

SP & N 6 way 8 way 12 way 16 way 24 way

68.48 81.22 93.21 110.80 233.40

78.46 93.06 106.78 126.94 267.40

2.00 2.50 3.00 4.00 5.00

57.76 72.21 86.65 115.53 144.41

nr nr nr nr nr

136.22 165.26 193.43 242.47 411.81

TP & N 4 way 6 way 8 way 12 way 16 way 24 way

474.56 491.24 514.34 548.42 627.54 790.29

543.69 562.79 589.26 628.30 718.95 905.41

3.00 3.50 4.00 4.00 5.00 6.40

86.65 101.09 115.53 115.53 144.41 184.85

nr nr nr nr nr nr

630.34 663.88 704.79 743.83 863.36 1090.26

Feeder MCCBs

MCB distribution boards; IP3X external protection enclosure; removable earth and neutral bars and DIN rail; 125/250amp incomers; including fixing to backgrounds

Material Costs/Prices for Measured Works – Electrical Installations

559

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Miniature circuit breakers for distribution boards; BS EN 60 898; DIN rail mounting; including connecting to circuit SP&N; including connecting of wiring 6 Amp 10–40 Amp 50 – 63 Amp

8.18 8.51 8.91

9.38 9.75 10.21

0.10 0.10 0.14

2.89 2.89 4.04

nr nr nr

12.26 12.64 14.25

TP&N; including connecting of wiring 6 Amp 10–40 Amp 50–63 Amp

34.68 36.05 37.76

39.73 41.30 43.26

0.30 0.45 0.45

8.66 13.00 13.00

nr nr nr

48.40 54.30 56.26

10mA 6 Amp 10–32 Amp 45 Amp

53.70 52.69 52.69

61.53 60.36 60.36

0.21 0.26 0.26

6.07 7.51 7.51

nr nr nr

67.59 67.87 67.87

30mA 6 Amp 10–40 Amp 50–63 Amp

53.70 52.69 52.69

61.53 60.36 60.36

0.21 0.21 0.26

6.07 6.07 7.51

nr nr nr

67.59 66.43 67.87

100mA 6 Amp 10–40 Amp 50–63 Amp

99.30 99.30 99.30

113.76 113.76 113.76

0.21 0.21 0.26

6.07 6.07 7.51

nr nr nr

119.83 119.83 121.27

20 Amp incomer 4 way 6 way 8 way 12 way

129.37 156.18 183.08 236.92

148.22 178.93 209.75 271.43

1.00 1.20 1.40 1.80

28.88 34.66 40.44 51.99

nr nr nr nr

177.10 213.59 250.19 323.42

32 Amp incomer 4 way 6 way 8 way 12 way

155.76 204.82 240.98 310.26

178.45 234.65 276.08 355.45

1.00 1.20 1.40 1.80

28.88 34.66 40.44 51.99

nr nr nr nr

207.33 269.31 316.51 407.44

244.08 308.70 364.99 512.07

279.63 353.67 418.16 586.66

1.50 2.10 2.70 3.90

43.32 60.65 77.98 112.64

nr nr nr nr

322.96 414.32 496.14 699.30

Resdiual current circuit breakers for distribution boards; DIN rail mounting; including connecting to circuit SP&N

HRC fused distribution boards; IP4X external protection enclosure; including earth and neutral bars; fixing to backgrounds SP&N

TP&N 20 Amp incomer 4 way 6 way 8 way 12 way

560

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV SWITCHGEAR & DISTRIBUTION BOARDS – cont'd BREAKERS / FUSES – cont'd HRC fused distribution boards – cont'd 32 Amp incomer 4 way 6 way 8 way 12 way

292.00 392.02 478.88 664.19

334.53 449.12 548.64 760.94

1.50 2.10 2.70 3.90

43.32 60.65 77.98 112.64

nr nr nr nr

377.86 509.78 626.62 873.58

63 Amp incomer 4 way 6 way 8 way

620.69 796.03 958.61

711.10 911.98 1098.24

2.17 2.83 2.57

62.67 81.74 74.23

nr nr nr

773.78 993.72 1172.47

100 Amp incomer 4 way 6 way 8 way

981.62 1283.06 1568.86

1124.61 1469.96 1797.39

2.40 2.73 3.87

69.32 78.85 111.77

nr nr nr

1193.92 1548.80 1909.16

200 Amp incomer 4 way 6 way

2431.37 3213.57

2785.53 3681.67

5.36 6.17

154.81 178.20

nr nr

2940.34 3859.87

2.64 5.72 8.44 8.44 15.34 16.09 16.67

3.03 6.55 9.66 9.66 17.58 18.44 19.10

0.10 0.12 0.15 0.15 0.15 0.15 0.15

2.89 3.47 4.33 4.33 4.33 4.33 4.33

nr nr nr nr nr nr nr

5.91 10.02 14.00 14.00 21.91 22.77 23.43

101.20 113.56 123.44 133.20 154.74 186.97

115.95 130.10 141.43 152.60 177.28 214.21

1.67 1.59 2.50 3.00 4.00 5.50

48.23 45.92 72.21 86.65 115.53 158.85

nr nr nr nr nr nr

164.18 176.03 213.63 239.25 292.81 373.06

HRC fuse; includes fixing to fuse holder 2 – 30 Amp 35 – 63 Amp 80 Amp 100 Amp 125 Amp 160 Amp 200 Amp Consumer units; fixed to backgrounds; including supports, fixings, connections/ jointing to equipment Switched and insulated; moulded plastic case, 63 Amp 230 Volt SP&N; earth and neutral bars; 30mA RCCB protection; fitted MCBs 2 way 4 way 6 way 8 way 12 way 16 way

Material Costs/Prices for Measured Works – Electrical Installations

561

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Switched and insulated; moulded plastic case, 100 Amp 230 Volt SP&N; earth and neutral bars; 30mA RCCB protection; fitted MCBs 2 way 4 way 6 way 8 way 12 way 16 way

101.20 113.56 123.44 133.20 154.74 186.97

115.95 130.10 141.43 152.60 177.28 214.21

1.67 1.59 2.50 3.00 4.00 5.50

48.23 45.92 72.21 86.65 115.53 158.85

nr nr nr nr nr nr

164.18 176.03 213.63 239.25 292.81 373.06

Extra for Residual current device; double pole; 230 volt/30mA tripping current 16 Amp 30 Amp 40 Amp 63 Amp 80 Amp 100 Amp

56.21 55.33 57.09 70.68 78.61 96.76

64.40 63.39 65.40 80.97 90.07 110.85

0.22 0.22 0.22 0.22 0.22 0.25

6.35 6.35 6.35 6.35 6.35 7.22

nr nr nr nr nr nr

70.76 69.75 71.76 87.33 96.42 118.07

Residual current device; double pole; 230 volt/ 100mA tripping current 63 Amp 80 Amp 100 Amp

64.61 74.75 96.78

74.02 85.63 110.87

0.22 0.22 0.25

6.35 6.35 7.22

nr nr nr

80.38 91.99 118.09

SP&N 63 Amp 100 Amp

249.97 365.40

286.38 418.63

1.30 1.95

37.55 56.32

nr nr

323.93 474.95

TP&N 63 Amp 100 Amp 200 Amp 300 Amp 400 Amp 600 Amp 800 Amp

314.92 442.53 682.63 1185.92 1301.92 1965.18 3069.83

360.80 506.99 782.07 1358.67 1491.56 2251.43 3517.00

1.83 2.48 3.13 4.45 4.45 5.72 7.88

52.85 71.63 90.40 128.53 128.53 165.21 227.59

nr nr nr nr nr nr nr

413.65 578.62 872.47 1487.19 1620.09 2416.64 3744.59

Double pole 20 Amp 32 Amp 63 Amp 100 Amp

48.99 59.05 215.48 197.72

56.13 67.65 246.87 226.53

1.02 1.02 1.21 1.86

29.46 29.46 34.95 53.72

nr nr nr nr

85.59 97.11 281.81 280.25

TP&N 20 Amp 32 Amp 63 Amp 100 Amp 125 Amp 160 Amp

61.50 71.56 244.85 242.85 255.39 587.61

70.46 81.98 280.51 278.22 292.59 673.20

1.29 1.83 2.48 2.48 2.48 2.48

37.26 52.85 71.63 71.63 71.63 71.63

nr nr nr nr nr nr

107.72 134.83 352.14 349.85 364.22 744.83

Heavy duty fuse switches; with HRC fuses BS 5419; short circuit rating 65kA, 500 volt; including retractable operating switches

Switch disconnectors to BSEN 60947-3; in sheet steel case; IP41 with door interlock fixed to backgrounds

562

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V20: LV DISTRIBUTION – cont'd LV SWITCHGEAR & DISTRIBUTION BOARDS – cont'd BREAKERS / FUSES – cont'd Enclosed switch disconnector to BSEN 60947-3; enclosure minimum IP55 rating; complete with earth connection bar; fixed to backgrounds TP 20 Amp 32 Amp 63 Amp

48.99 59.05 215.48

56.13 67.65 246.87

1.02 1.02 1.21

29.46 29.46 34.95

nr nr nr

85.59 97.11 281.81

TP&N 20 Amp 32 Amp 63 Amp

61.50 71.56 244.85

70.46 81.98 280.51

1.29 1.83 2.48

37.26 52.85 71.63

nr nr nr

107.72 134.83 352.14

446.30 573.50 982.68

511.31 657.03 1125.82

2.62 3.03 4.48

75.67 87.51 129.39

nr nr nr

586.98 744.55 1255.21

900mm long 200 Amp 300 Amp 500 Amp

642.85 757.63 1120.67

736.49 867.99 1283.91

3.04 3.59 4.42

87.80 103.69 127.66

nr nr nr

824.29 971.67 1411.57

1350mm long 200 Amp 300 Amp 500 Amp

878.08 1033.49 1654.32

1005.98 1184.03 1895.29

3.38 3.94 4.82

97.62 113.80 139.21

nr nr nr

1103.61 1297.83 2034.51

51.69 63.21

59.21 72.42

0.52 0.85

15.02 24.55

nr nr

74.23 96.97

Busbar chambers; fixed to background including all supports, fixings, connections/ jointing to equipment Sheet steel case enclosing 4 pole 550 Volt copper bars, detachable metal end plates 600mm long 200 Amp 300 Amp 500 Amp

Contactor relays; pressed steel enclosure; fixed to backgrounds including supports, fixings, connections/jointing to equipment Relays 6 Amp, 415/240 Volt, 4 pole N/O 6 Amp, 415/240 Volt, 8 pole N/O Push button stations; heavy gauge pressed steel enclosure; polycarbonate cover; IP65; fixed to backgrounds including supports, fixings,connections/joining to equipment

Material Costs/Prices for Measured Works – Electrical Installations

563

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Standard units One button (start or stop) Two button (start or stop) Three button (forward-reverse-stop)

Material £

Labour hours

Labour £

Unit

Total rate £

65.41 69.43 98.40

74.93 79.55 112.74

0.39 0.47 0.57

11.26 13.57 16.46

nr nr nr

86.20 93.12 129.20

66.25

75.90

1.43

41.30

nr

117.21

88.88

101.83

2.17

62.67

nr

164.50

129.41

148.26

3.51

101.38

nr

249.64

136.87

156.80

4.85

140.08

nr

296.88

151.28

173.31

7.01

202.46

nr

375.78

90.48 132.47 149.62 167.62 187.02 200.86 214.72 231.34 278.44 286.76

103.66 151.76 171.41 192.03 214.26 230.12 246.00 265.04 319.00 328.53

1.43 1.53 2.17 2.37 3.33 3.30 4.66 5.36 7.01 7.67

41.30 44.19 62.67 68.45 96.18 95.31 134.59 154.81 202.46 221.53

nr nr nr nr nr nr nr nr nr nr

144.96 195.95 234.08 260.48 310.44 325.43 380.59 419.85 521.47 550.05

Weatherproof junction boxes; enclosures with rail mounted terminal blocks; side hung door to receive padlock; fixed to backgrounds, including all supports and fixings (Suitable for cable up to 2.5mm2; including glandplates and gaskets) Sheet steel with zinc spray finish enclosure Overall Size 229 x 152; suitable to receive 3 x 20(A) glands per gland plate Overall Size 306 x 306; suitable to receive 14 x 20(A) glands per gland plate Overall Size 458 x 382; suitable to receive 18 x 20(A) glands per gland plate Overall Size 762 x508; suitable to receive 26 x 20(A) glands per gland plate Overall Size 914 x 610; suitable to receive 45 x 20(A) glands per gland plate Weatherproof junction boxes; enclosures with rail mounted terminal blocks; screw fixed lid; fixed to backgrounds, including all supports and fixings (suitable for cable up to 2.5mm2; including glandplates and gaskets) Glassfibre reinforced Overall Size 190 x Overall Size 190 x Overall Size 280 x Overall Size 280 x Overall Size 380 x Overall Size 380 x Overall Size 380 x Overall Size 380 x Overall Size 560 x Overall Size 560 x

polycarbonate enclosure 190 x 130 190 x 180 190 x 130 190 x 180 190 x 130 190 x 180 280 x 130 280 x 180 280 x 130 380 x 180

564

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V21: GENERAL LIGHTING Y73 – LUMINAIRES (GENERAL) LUMINAIRES Fluorescent Luminaires; surface fixed to backgrounds Batten type; surface mounted 600 mm Single – 18 W 600 mm Twin – 18 W 1200 mm Single – 36 W 1200 mm Twin – 36 W 1500 mm Single – 58 W 1500 mm Twin – 58 W 1800 mm Single – 70 W 1800 mm Twin – 70 W 2400 mm Single – 100 W 2400 mm Twin – 100 W

8.72 15.46 11.55 22.12 13.07 26.08 15.76 28.83 21.58 37.76

9.99 17.71 13.23 25.35 14.97 29.88 18.05 33.03 24.72 43.26

0.58 0.59 0.76 0.77 0.84 0.85 1.05 1.06 1.25 1.27

16.75 17.04 21.95 22.24 24.26 24.55 30.33 30.62 36.10 36.68

nr nr nr nr nr nr nr nr nr nr

26.75 34.75 35.18 47.59 39.24 54.43 48.38 63.64 60.82 79.94

Surface mounted, opal diffuser 600 mm Twin – 18 W 1200 mm Single – 36 W 1200 mm Twin – 36 W 1500 mm Single – 58 W 1500 mm Twin – 58 W 1800 mm Single – 70 W 1800 mm Twin – 70 W 2400 mm Single – 100 W 2400 mm Twin – 100 W

23.98 20.48 31.89 23.55 37.29 29.37 40.33 38.59 55.71

27.47 23.46 36.53 26.98 42.72 33.64 46.21 44.22 63.83

0.62 0.79 0.80 0.88 0.90 1.09 1.10 1.30 1.31

17.91 22.82 23.11 25.42 25.99 31.48 31.77 37.55 37.84

nr nr nr nr nr nr nr nr nr

45.38 46.28 59.64 52.39 68.71 65.12 77.98 81.76 101.66

55.24 59.07 49.83 64.39 68.82 49.73 96.96 111.30 82.33

63.29 67.67 57.09 73.76 78.85 56.97 111.09 127.51 94.32

1.09 1.09 0.25 0.90 0.90 0.25 0.90 0.90 0.25

31.48 31.48 7.22 25.99 25.99 7.22 25.99 25.99 7.22

nr nr nr nr nr nr nr nr nr

94.77 99.16 64.31 99.76 104.84 64.19 137.08 153.51 101.54

43.45 44.90 50.24 95.95 57.48 97.40 99.66 60.63 63.56 66.16 76.10

49.77 51.44 57.56 109.93 65.86 111.58 114.18 69.46 72.82 75.79 87.18

0.84 0.87 0.25 0.87 0.25 0.89 0.91 0.25 0.84 0.87 0.25

24.26 25.13 7.22 25.13 7.22 25.71 26.28 7.22 24.26 25.13 7.22

nr nr nr nr nr nr nr nr nr nr nr

74.03 76.57 64.78 135.06 73.08 137.29 140.46 76.68 97.08 100.92 94.40

Surface mounted linear fluorescent; T8 lamp; high frequency control gear; low brightness; 65° cut-off; including wedge style louvre 1200mm, 1 x 36 watt 1200mm 2 x 36 watt Extra for emergency pack 1500mm, 1 x 58 watt 1500mm 2 x 58 watt Extra for emergency pack 1800mm, 1 x 70 watt 1800mm, 2 x 70 watt Extra for emergency pack Modular recessed linear fluorescent; high frequency control gear; low brightness; 65° cut off; including wedge style louvre; fitted to exposed T grid ceiling 600 x 600 mm, 3 x 18 watt T8 600 x 600 mm, 4 x 18 watt T8 Extra for emergency pack 300 x 1200 mm, 2 x 36 watt T8 Extra for emergency pack 600 x 1200 mm, 3 x 36 watt T8 600 x 1200 mm, 4 x 36 watt T8 Extra for emergency pack 600 x 600, 3 x 14 watt T5 600 x 600, 4 x 14 watt T5 Extra for emergency pack

Material Costs/Prices for Measured Works – Electrical Installations

565

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Modular recessed; T8 lamp; high frequency control gear; cross-blade louvre; fitted to exposed T grid ceiling 600 x 600 mm, 3 x 18 watt 600 x 600 mm, 4 x 18 watt Extra for emergency pack

47.44 64.20 57.10

54.35 73.55 65.42

0.84 0.87 0.25

24.26 25.13 7.22

nr nr nr

78.61 98.68 72.64

Modular recessed compact fluorescent; TCL lamp; high frequency control gear; low brightness; 65° cut-off; including wedge style louvre; fitted to exposed T grid ceiling 300 x 300 mm, 2 x 18 watt Extra for emergency pack 500 x 500 mm, 2 x 36 watt 600 x 600 mm, 2 x 36 watt 600 x 600 mm, 2 x 40 watt Extra for emergency pack

96.08 75.68 88.72 89.85 94.01 54.22

110.07 86.71 101.65 102.93 107.70 62.12

0.75 0.25 0.82 0.82 0.82 0.25

21.66 7.22 23.68 23.68 23.68 7.22

nr nr nr nr nr nr

131.74 93.93 125.33 126.62 131.39 69.34

Ceiling recessed asymetric compact fluorescent downlighter; high frequency control gear; TCD lamp in 200 mm diameter luminaire; for wall-washing application 1 x 18 watt 1 x 26 watt 2 x 18 watt 2 x 26 watt

152.16 152.16 169.51 169.51

174.33 174.33 194.20 194.20

0.75 0.75 0.75 0.75

21.66 21.66 21.66 21.66

nr nr nr nr

195.99 195.99 215.86 215.86

61.46

70.41

0.75

21.66

nr

92.07

Wall mounted compact fluorescent uplighter; high frequency control gear; TCL lamp in 300mm x 600mm luminaire 2 x 36 watt 2 x 40 watt 2 x 55 watt

238.53 256.52 256.52

273.27 293.89 293.89

0.84 0.84 0.84

24.26 24.26 24.26

nr nr nr

297.53 318.15 318.15

Suspended linear fluorescent; T5 lamp; high frequency control gear; low brightness; 65° cut-off; 30% uplight, 70% downlight; including wedge style louvre 1 x 49 watt Extra for emergency pack

163.57 90.36

187.40 103.52

0.75 0.25

21.66 7.22

nr nr

209.06 110.75

Semi-recessed 'architectural' linear fluorescent; T5 lamp; high frequency control gear; low brightness, delivers direct, ceiling and graduated wall washing illumination 600 x 600 mm, 2 x 24 watt 600 x 600 mm, 4 x 14 watt 500 x 500 mm,2 x 24 watt Extra for emergency pack

134.00 144.21 131.76 64.17

153.52 165.22 150.95 73.52

0.87 0.87 0.87 0.25

25.13 25.13 25.13 7.22

nr nr nr nr

178.65 190.34 176.08 80.74

Ceiling recessed asymetric compact fluorescesnt downlights; high frequency control gear; linear 200mm x 600mm luminaire with low glare louvre; for wall washing applications 1 x 55 watt TCL

566

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V21: GENERAL LIGHTING – cont'd LUMINAIRES (GENERAL) – cont'd LUMINAIRES – cont'd Downlighter, recessed; low voltage; mirror reflector with white/chrome bezel; dimmable transformer; for dichroic lamps 85mm dia x 20/50 watt 118mm dia x 50 watt 165mm dia x 100 watt

15.52 20.51 93.69

17.78 23.49 107.34

0.66 0.66 0.66

19.06 19.06 19.06

nr nr nr

36.85 42.56 126.40

57.26 57.26 60.78

65.60 65.60 69.63

1.50 1.50 1.50

43.32 43.32 43.32

nr nr nr

108.92 108.92 112.96

176.94 190.98 249.70

202.72 218.80 286.08

1.50 1.50 1.50

43.32 43.32 43.32

nr nr nr

246.04 262.13 329.40

Corrosion resistant GRP body; gasket sealed; acrylic diffuser 600 mm Single – 18 W 600 mm Twin – 18 W 1200 mm Single – 36 W 1200 mm Twin – 36 W 1500 mm Single – 58 W 1500 mm Twin – 58 W 1800 mm Single – 70 W 1800 mm Twin – 70 W

29.60 38.54 33.32 42.72 37.13 46.17 54.96 68.22

33.91 44.16 38.17 48.95 42.54 52.90 62.97 78.15

0.49 0.49 0.64 0.64 0.72 0.72 0.94 0.94

14.15 14.15 18.48 18.48 20.80 20.80 27.15 27.15

nr nr nr nr nr nr nr nr

48.07 58.31 56.66 67.43 63.34 73.70 90.12 105.30

Flameproof to IIA/IIB,I.P. 64; Aluminium Body; BS 229 and 899 600 mm Single – 18 W 600 mm Twin – 18 W 1200 mm Single – 36 W 1200 mm Twin – 36 W 1500 mm Single – 58 W 1500 mm Twin – 58 W 1800 mm Single – 70 W 1800 mm Twin – 70 W

331.88 413.44 363.54 449.46 389.20 469.96 426.66 492.22

380.22 473.67 416.49 514.93 445.89 538.41 488.81 563.91

1.04 1.04 1.31 1.18 1.64 1.64 1.97 1.97

30.04 30.04 37.84 34.08 47.37 47.37 56.90 56.90

nr nr nr nr nr nr nr nr

410.26 503.70 454.33 549.01 493.25 585.78 545.70 620.81

External Lighting Ground mounted 50 watt Ceiling mounted 50 watt

365.54 164.23

418.78 188.16

2.25 2.25

64.98 64.98

nr nr

483.77 253.14

32.17

36.85

0.75

21.66

nr

58.51

High/Low Bay luminaires Compact discharge; aluminium reflector 150 watt 250 watt 400 watt Sealed discharge; aluminium reflector 150 watt 250 watt 400 watt

Bulkhead; aluminium body and polycarbonate bowl; vandal resistant; IP65 60 watt

Material Costs/Prices for Measured Works – Electrical Installations

567

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Extra for Emergency version 2D 2 pin 16 watt 2D 2 pin 28 watt

86.46 27.17 54.26

99.05 31.13 62.16

0.25 0.66 0.66

7.22 19.06 19.06

nr nr nr

106.27 50.19 81.23

Extra for Emergency version Photocell

63.94 19.07

73.26 21.84

0.25 0.75

7.22 21.66

nr nr

80.48 43.50

1500 mm high circular bollard; polycarbonate visor; vandal resistant; IP54 50 watt 70 watt 80 watt

201.40 204.62 244.89

230.73 234.43 280.56

1.75 1.75 1.75

50.54 50.54 50.54

nr nr nr

281.28 284.97 331.11

Floodlight; enclosed high performance dischargelight; integeral control gear; reflector; toughened glass; IP65 70 watt 100 watt 150 watt 250 watt 400 watt

89.22 124.31 99.00 173.29 179.51

102.21 142.42 113.42 198.53 205.66

1.25 1.25 1.25 1.25 1.25

36.10 36.10 36.10 36.10 36.10

nr nr nr nr nr

138.32 178.52 149.53 234.63 241.76

19.05

21.83

0.75

21.66

nr

43.49

Single circuit; 25A 2 P&E steel trunking; low voltage with copper conductors; including couplers and supports; fixed to backgrounds Straight track Live end feed unit complete with end stop Flexible couplers 0.5m Tap off complete with 0.8m of cable

12.80 22.04 48.22 7.58

14.67 25.25 55.25 8.69

0.50 0.33 0.33 0.25

14.44 9.53 9.53 7.22

m nr nr nr

29.11 34.78 64.78 15.91

Three circuit; 25A 2 P&E steel trunking; low voltage with copper conductors; including couplers and supports incorporating integral twisted pair comms bus bracket; fixed to backgrounds Straight track Live end feed unit complete with end stop Flexible couplers 0.5m Tap off complete with 0.8m of cable

20.85 27.55 55.08 9.95

23.88 31.57 63.11 11.40

0.75 0.50 0.45 0.30

21.66 14.44 13.00 8.66

m nr nr nr

45.55 46.01 76.11 20.06

Extra for Photocell Lighting Track

568

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V21: GENERAL LIGHTING – cont'd Y74 – LIGHTING ACCESSORIES SWITCHES 6 Amp metal clad surface mounted switch, gridswitch; one way 1 Gang 2 Gang 3 Gang 4 Gang 6 Gang 8 Gang 10 Gang

5.03 6.90 10.94 12.96 22.26 26.07 39.33

5.76 7.91 12.53 14.85 25.50 29.87 45.06

0.43 0.55 0.77 0.88 1.10 1.28 1.67

12.42 15.89 22.24 25.42 31.77 36.97 48.23

nr nr nr nr nr nr nr

18.18 23.79 34.77 40.26 57.27 66.84 93.29

1.79 2.40 4.50 1.85 1.24 2.10

2.05 2.75 5.16 2.12 1.42 2.41

0.03 0.04 0.08 0.08 0.07 0.08

0.87 1.16 2.31 2.31 2.02 2.31

nr nr nr nr nr nr

2.92 3.90 7.47 4.43 3.44 4.72

6 Amp modular type switch; galvanised steel box, bronze or satin chrome coverplate; metalclad switches; flush mounting; one way 1 Gang 2 Gang 3 Gang 4 Gang 6 Gang 8 Gang 9 Gang 12 Gang

13.65 18.85 27.22 32.40 54.63 65.18 81.75 97.37

15.64 21.59 31.18 37.12 62.59 74.68 93.66 111.55

0.43 0.55 0.77 0.88 1.18 1.63 1.83 2.29

12.42 15.89 22.24 25.42 34.08 47.08 52.85 66.14

nr nr nr nr nr nr nr nr

28.06 37.48 53.42 62.54 96.67 121.76 146.52 177.69

6 Amp modular type swtich; galvanised steel box; bronze or satin chrome coverplate; flush mounting; two way 1 Gang 2 Gang 3 Gang 4 Gang 6 Gang 8 Gang 9 Gang 12 Gang

14.14 19.87 28.74 34.45 57.82 69.25 86.32 103.44

16.20 22.76 32.92 39.47 66.25 79.33 98.89 118.50

0.43 0.55 0.77 0.88 1.18 1.63 1.83 2.22

12.42 15.89 22.24 25.42 34.08 47.08 52.85 64.12

nr nr nr nr nr nr nr nr

28.62 38.64 55.16 64.88 100.33 126.41 151.75 182.62

Plate switches; 10 Amp flush mounted, white plastic fronted; 16mm metal box; fitted brass earth terminal 1 Gang 1 Way, Single Pole 1 Gang 2 Way, Single Pole 2 Gang 2 Way, Single Pole 3 Gang 2 Way, Single Pole 1 Gang Intermediate

2.04 2.30 3.33 6.60 7.65

2.33 2.63 16.11 7.57 8.77

0.28 0.33 0.44 0.56 0.43

8.09 9.53 12.71 16.17 12.42

nr nr nr nr nr

10.42 12.17 28.82 23.74 21.19

Extra for 10 Amp – Two way switch 20 Amp – Two way switch 20 Amp – Intermediate 20 Amp – One way SP switch Steel blank plate; 1 Gang Steel blank plate; 2 Gang

Material Costs/Prices for Measured Works – Electrical Installations

569

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

1 Gang 1 Way, Double Pole 1 Gang Single Pole with bell symbol 1 Gang Single Pole marked "PRESS" Time delay switch, suppressed Plate switches; 6 Amp flush mounted white plastic fronted; 25mm metal box; fitted brass earth terminal 4 Gang 2 Way, Single Pole 6 Gang 2 Way, Single Way Architrave plate switches; 6 Amp flush mounted, white plastic fronted; 27mm metal box; brass earth terminal 1 Gang 2 Way, Single Pole 2 Gang 2 Way, Single Pole

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

6.81 5.51 4.54 42.58

7.81 6.32 5.20 48.78

0.33 0.23 0.23 0.49

9.53 6.64 6.64 14.15

nr nr nr nr

17.34 12.96 11.84 62.93

14.97 23.93

17.15 27.42

0.42 0.47

12.13 13.57

nr nr

29.28 40.99

2.71 5.37

3.10 12.29

0.30 0.36

8.66 10.40

nr nr

11.77 22.69

Ceiling switches, white moulded plastic, pull cord; standard unit 6 Amp, 1 Way, Single Pole 6 Amp, 2 Way, Single Pole 16 Amp, 1 Way, Double Pole 45 Amp, 1 Way, Double Pole with neon indicator

3.88 4.67 6.99

4.45 5.35 8.01

0.32 0.34 0.37

9.24 9.82 10.69

nr nr nr

13.69 15.17 18.70

10.86

12.44

0.47

13.57

nr

26.01

10 Amp splash proof moulded switch with plain, threaded or PVC entry 1 Gang,2 Way Single Pole 2 Gang, 1 Way Single Pole 2 Gang, 2 Way Single Pole

16.68 18.85 23.88

19.11 21.59 27.36

0.34 0.36 0.40

9.82 10.40 11.55

nr nr nr

28.93 31.99 38.91

6 Amp watertight switch; metalclad; BS 3676; ingress protected to IP65 surface mounted 1 Gang, 2 Way; terminal entry 1 Gang, 2 Way; through entry 2 Gang, 2 Way; terminal entry 2 Gang, 2 Way; through entry 2 Way replacement switch

16.10 16.10 47.45 47.45 12.79

18.44 18.44 54.36 54.36 14.65

0.41 0.42 0.54 0.53 0.10

11.84 12.13 15.60 15.31 2.89

nr nr nr nr nr

30.28 30.57 69.96 69.67 17.54

15 Amp watertight switch; metalclad; BS 3676; ingress protected to IP65; surface mounted 1 Gang 2 Way, terminal entry 1 Gang 2 Way, through entry 2 Gang 2 Way, terminal entry 2 Gang 2 Way, through entry Intermediate interior only 2 way interior only Double pole interior only

21.55 21.55 50.59 50.59 12.79 12.79 12.79

24.68 24.68 57.96 57.96 14.65 14.65 14.65

0.42 0.43 0.55 0.54 0.11 0.11 0.11

12.13 12.42 15.89 15.60 3.18 3.18 3.18

nr nr nr nr nr nr nr

36.81 37.10 73.84 73.55 17.83 17.83 17.83

13.42 17.66

15.37 20.23

0.28 0.28

8.09 8.09

nr nr

23.46 28.32

Electrical accessories; fixed to backgrounds (Including fixings) Dimmer switches; rotary action; for individual lights; moulded plastic case; metal backbox; flush mounted 1 Gang, 1 Way; 250 Watt 1 Gang, 1 Way; 400 Watt

570

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V21: GENERAL LIGHTING – cont'd Y74 – LIGHTING ACCESSORIES – cont'd SWITCHES – cont'd Electrical accessories – cont'd Dimmer switches; push on/off action; for individual lights; moulded plastic case; metal backbox; flush mounted 1 Gang, 2 Way; 250 Watt 3 Gang, 2 Way; 250 Watt 4 Gang, 2 Way; 250 Watt

20.50 30.20 39.75

23.49 34.60 45.54

0.34 0.48 0.57

9.82 13.86 16.46

nr nr nr

33.31 48.46 62.00

Dimmer switches; rotary action; metal cald; metal backbox; BS 5518 and BS 800; flush mounted 1 Gang, 1 Way; 400 Watt

35.12

40.24

0.33

9.53

nr

49.77

Ceiling rose: white moulded plastic; flush fixed to conduit box Plug in type; ceiling socket with 2 terminals , loop-in and ceiling plug with 3 terminals and cover

6.51

7.46

0.34

9.82

nr

17.28

BC lampholder; white moulded plastic; heat resistent PVC insulated and sheathed cable; flush fixed 2 Core; 0.75mm2

2.26

2.59

0.33

9.53

nr

12.12

Batten holder: white moulded plastic; 3 terminals; BS 5042; fixed to conduit Straight pattern; 2 terminals with loop-in and Earth Angled pattern; looped in terminal

4.28 4.28

4.90 4.90

0.29 0.29

8.38 8.38

nr nr

13.28 13.28

1.16

1.33

0.08

2.31

m

3.64

1.52

1.74

0.15

4.33

m

6.07

4992.00 900.00

5719.15 1031.10

12.00 4.00

346.59 115.53

nr nr

6065.74 1146.63

Ceiling Roses

LIGHTING CONTROLS Lighting control system; including software, commissioning and testing. Typical componant parts indicated. System requirements dependant on final lighting design Y61 – CABLES Cable; Twin twisted bus; LSF sheathed; aluminium conductors Cable; ELV 4 core 7/0.2; LSF sheathed; alumimium screened; copper conductor EQUIPMENT Central supervisor controller including software Area control unit

Material Costs/Prices for Measured Works – Electrical Installations

571

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Lighting control module; plug in; 9 output, 9 channel switching Base and lid assembly

150.00

171.85

2.05

59.21

nr

231.06

Lighting control module; plug in; 9 output 9 channel dimming (DSI) Base and lid assembly

170.00

194.76

2.05

59.21

nr

253.97

Lighting control module; plug in; 9 output 9 channel dimming (DALI) Base and lid assembly

180.00

206.22

2.05

59.21

nr

265.43

160.00

183.31

1.85

53.43

nr

236.74

190.00

217.68

1.85

53.43

nr nr

271.11

52.00

59.57

0.60

17.33

nr

76.90

57.20

65.53

0.60

17.33

nr

82.86

62.40

71.49

1.20

34.66

nr

106.15

Lighting control module; hard wired; 4 circuit switching Base and lid assembly Compact lighting control module; 3 output 18 ballast drive; dimmable (DALI) Base and lid assembly Presence detectors Flush mounted Universal presence detectors with photo cell; flush mounted Scene switch plate; anodised aluminium finish 4 way

572

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V22: GENERAL LV POWER Y74 – ACCESSORIES OUTLETS Socket outlet: unswitched; 13 Amp metal clad; BS 1363; galvanised steel box and coverplate with white plastic inserts; fixed surface mounted 1 Gang 2 Gang

5.95 10.96

6.82 12.56

0.41 0.41

11.84 11.84

nr nr

18.66 24.40

Socket outlet: switched; 13 Amp metal clad; BS 1363; galvanised steel box and coverplate with white plastic inserts; fixed surface mounted 1 Gang 2 Gang

6.10 10.92

6.99 12.51

0.43 0.45

12.42 13.00

nr nr

19.41 25.51

Socket outlet: switched with neon indicator; 13 Amp metal clad; BS 1363; galvanised steel box and coverplate withwhite plastic inserts; fixed surface mounted 1 Gang 2 Gang

12.95 23.54

14.83 26.97

0.43 0.45

12.42 13.00

nr nr

27.25 39.97

Socket outlet: unswitched; 13 Amp; BS 1363; white moulded plastic box and coverplate; fixed surface mounted 1 Gang 2 Gang

4.47 8.83

5.12 10.12

0.41 0.41

11.84 11.84

nr nr

16.97 21.96

Socket outlet; switched; 13 Amp; BS 1363; white moulded plastic box and coverplate; fixed surface mounted 1 Gang 2 Gang

5.40 9.10

6.18 10.43

0.43 0.45

12.42 13.00

nr nr

18.60 23.43

Socket outlet: switched with neon indicator; 13 Amp; BS 1363; white moulded plastic box and coverplate; fixed surface mounted 1 Gang 2 Gang

11.05 14.90

12.65 17.07

0.43 0.45

12.42 13.00

nr nr

25.07 30.07

Socket outlet: switched; 13 Amp; BS 1363; galvanised steel box, white moulded coverplate; flush fitted 1 Gang 2 Gang

5.40 10.45

6.18 11.97

0.43 0.45

12.42 13.00

nr nr

18.60 24.97

Socket outlet: switched with neon indicator; 13 Amp; BS 1363; galvanised steel box, white moulded coverplate; flush fixed 1 Gang 2 Gang

11.05 19.11

25.31 43.79

0.43 0.45

12.42 13.00

nr nr

37.73 56.78

Material Costs/Prices for Measured Works – Electrical Installations

573

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Socket outlet: switched; 13 Amp; BS 1363; galvanised steel box, satin chrome coverplate; BS 4662; flush fixed 1 Gang 2 Gang

18.03 25.58

20.65 29.30

0.43 0.45

12.42 13.00

nr nr

33.07 42.30

Socket outlet: switched with neon indicator; 13 Amp; BS 1363; steel backbox, satin chrome coverplate; BS 4662; flush fixed 1 Gang 2 Gang

14.18 25.58

16.24 29.30

0.43 0.45

12.42 13.00

nr nr

28.66 42.30

RCD protected socket outlets, 13 amp, to BS 1363; galvanised steel box, white moulded cover plate; flush fitted 2 gang, 10 mA tripping (active control) 2 gang, 30 mA tripping (active control) 2 gang, 30 mA tripping (passive control)

65.90 58.70 58.70

75.50 67.24 67.24

0.45 0.45 0.45

13.00 13.00 13.00

nr nr nr

88.49 80.24 80.24

Filtered socket outlets, 13 amp, to BS 1363, with separate 'clean earth' terminal; galvanised steel box, white moulded cover plate; flush fitted 2 gang (spike protected) 2 gang (spike and RFI protected) Replacement filter cassette

49.62 62.81 17.40

56.85 71.96 19.93

0.50 0.55 0.15

14.44 15.89 4.33

nr nr nr

71.29 87.85 24.27

9.21 16.57 23.02 74.98

10.55 18.98 26.37 85.90

0.43 0.43 0.43 0.52

12.42 12.42 12.42 15.02

nr nr nr nr

22.97 31.40 38.79 100.92

79.97

91.62

0.64

18.48

nr

110.10

Plug for weatherproof socket outlet: protected to I.P.66 13Amp plug

3.28

3.75

0.21

6.07

nr

9.82

Floor service outlet box; comprising flat lid with flanged carpet trim; twin 13A switched socket outlets; punched plate for mounting 2 telephone outlets; one blank plate; triple compartment 3 compartment

33.75

38.66

0.88

25.42

nr

64.08

Floor service outlet box; comprising flat lid with flanged carpet trim; twin 13A switched socket outlets; punched plate for mounting 2 telephone outlets; two blank plates; four compartment 4 compartment

46.03

52.74

0.88

25.42

nr

78.15

Non-standard socket outlets, 13 amp, to BS 1363, with separate 'clean earth' terminal; for plugs with T-shaped earth pin; galvanised steel box, white moulded cover plate; flush fitted 1 gang 2 gang 2 gang coloured RED 40A 30mA tripping current protecting 1 socket 40A 30mA tripping current protecting 2 sockets

574

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V22: GENERAL LV POWER – cont'd ACCESSORIES – cont'd OUTLETS – cont'd Floor service outlet box; comprising flat lid with flanged carpet trim; single 13A unswitched socket outlet; single compartment; circular 1 compartment

49.10

56.25

0.79

22.82

nr

79.07

Floor service grommet, comprising flat lid with flanged carpet trim; circular Floor Grommet

22.21

25.45

0.49

14.15

nr

39.60

Power post; aluminium painted body; PVC-U cover; 5 nr outlets

265.11

303.73

4.00

115.53

nr

419.26

Power pole; 3.6 metres high; aluminium painted body; PVC-U cover; 6 nr outlets

339.94

389.46

4.00

115.53

nr

504.99

37.15

42.56

1.50

43.32

nr

85.88

Single 630mm long 3000mm long

118.41 341.22

135.66 390.92

2.00 2.00

57.76 57.76

nr nr

193.42 448.69

Double 630mm long 3000mm long

118.41 362.15

135.66 414.90

3.00 3.00

86.65 86.65

nr nr

222.30 501.55

Connection units: moulded pattern; BS 5733; moulded plastic box; white coverplate; knockout for flex outlet; surface mounted – standard fused DP Switched Unswitched DP Switched with neon indicator

6.89 6.32 8.74

7.89 7.24 10.01

0.49 0.49 0.49

14.15 14.15 14.15

nr nr nr

22.04 21.39 24.16

Connection units: moulded pattern; BS 5733; galvanised steel box; white coverplate; knockout for flex outlet; surface mounted DP Switched DP Unswitched DP Switched with neon indicator

8.68 8.12 10.54

17.84 9.30 12.08

0.49 0.49 0.49

14.15 14.15 14.15

nr nr nr

31.99 23.45 26.23

POWER POSTS/POLES/PILLARS

Extra for Power pole extension bar; 900mm long Vertical multi compartment pillar; PVC-U; BS 4678 Part4 EN60529; excludes accessories

CONNECTION UNITS

Material Costs/Prices for Measured Works – Electrical Installations

575

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Connection units: galvanised pressed steel pattern; galvanised steel box; satin chrome or satin brass finish; white moulded plastic inserts; flush mounted – standard fused DP Switched Unswitched DP Switched with neon indicator

12.71 11.95 17.15

14.56 13.69 19.64

0.49 0.49 0.49

14.15 14.15 14.15

nr nr nr

28.71 27.84 33.80

Connection units: galvanised steel box; satin chrome or satin brass finish; white moulded plastic inserts; flex outlet; flush mounted – standard fused Switched Unswitched Switched with neon indicator

12.19 11.57 15.69

13.97 13.26 17.97

0.49 0.49 0.49

14.15 14.15 14.15

nr nr nr

28.12 27.41 32.12

Shaver unit: self setting overload device; 200/ 250 voltage supply; white moulded plastic faceplate; unswitched Surface type with moulded plastic box Flush type with galvanised steel box

22.92 23.98

26.26 27.48

0.55 0.57

15.89 16.46

nr nr

42.15 43.94

Shaver unit: dual voltage supply unit; white moulded plastic faceplate; unswitched Surface type with moulded plastic box Flush type with galvanised steel box

27.63 28.73

31.65 32.91

0.62 0.64

17.91 18.48

nr nr

49.56 51.40

Cooker control unit: BS 4177; 45 amp D.P. main switch; 13 Amp switched socket outlet; metal coverplate; plastic inserts; neon indicators Surface mounted with mounting box Flush mounted with galvanised steel box

32.45 31.01

37.17 35.52

0.61 0.61

17.62 17.62

nr nr

54.79 53.14

Cooker control unit: BS 4177; 45 Amp D.P. main switch; 13 Amp switched socket outlet; moulded plastic box and coverplate; surface mounted Standard With neon indicators

22.51 26.42

25.79 30.27

0.61 0.61

17.62 17.62

nr nr

43.41 47.88

Connector unit: moulded white plastic cover and block; galvanised steel back box; to immersion heaters 3Kw up to 915mm long; fitted to thermostat

24.13

27.64

0.75

21.67

nr

49.31

Water heater switch: 20 Amp; switched with neon indicator DP Switched with neon indicator

11.98

29.20

0.45

13.00

nr

42.20

SHAVER SOCKETS

COOKER CONTROL UNITS

CONTROL COMPONENTS

576

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V22: GENERAL LV POWER – cont'd ACCESSORIES – cont'd SWITCH DISCONNECTORS Switch disconnectors; moulded plastic enclosure; fixed to backgrounds 3 pole; IP54; Grey 16 Amp 25 Amp 40 Amp 63 Amp 80 Amp

21.82 25.82 42.05 65.46 113.49

25.00 29.58 48.18 75.00 130.02

0.80 0.80 0.80 1.00 1.25

23.11 23.11 23.11 28.88 36.10

nr nr nr nr nr

48.11 52.68 71.28 103.88 166.12

6 pole; IP54; Grey 25 Amp 63 Amp 80 Amp

36.28 61.28 116.15

41.56 70.21 133.07

1.00 1.25 1.80

28.88 36.10 51.99

nr nr nr

70.44 106.31 185.06

3 pole; IP54; Yellow 16 Amp 25 Amp 40 Amp 63 Amp

23.98 28.35 45.99 71.54

27.47 32.48 52.69 81.97

0.80 0.80 0.80 1.00

23.11 23.11 23.11 28.88

nr nr nr nr

50.58 55.58 75.80 110.85

6 pole; IP54; Yellow 25 Amp

36.28

41.56

1.00

28.88

nr

70.44

2.02 7.25

2.31 8.30

0.55 0.60

15.89 17.33

nr nr

18.19 25.63

3 pole and earth 16 Amp 32 Amp

8.03 10.80

9.20 12.38

0.65 0.72

18.77 20.80

nr nr

27.98 33.17

3 pole; neutral and earth 16 Amp 32 Amp

8.57 13.00

9.82 14.89

0.72 0.78

20.80 22.53

nr nr

30.61 37.42

2 pole and earth 16 Amp 32 Amp

5.20 9.00

5.95 10.31

0.42 0.50

12.13 14.44

nr nr

18.09 24.75

3 pole and earth 16 Amp 32 Amp

9.77 14.57

11.19 16.70

0.48 0.58

13.86 16.75

nr nr

25.05 33.45

INDUSTRIAL SOCKETS/PLUGS Plugs; Splashproof; 100–130 volts, 50–60 Hz; IP 44 (Yellow) 2 pole and earth 16 Amp 32 Amp

Connectors; Splashproof; 100–130 volts, 50–60 Hz; IP 44 (Yellow)

Material Costs/Prices for Measured Works – Electrical Installations

577

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

3 pole; neutral and earth 16 Amp 32 Amp

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

13.68 19.19

15.67 21.99

0.52 0.73

15.02 21.08

nr nr

30.69 43.07

2 pole and earth 16 Amp 32 Amp

4.39 10.98

5.03 12.58

0.55 0.60

15.89 17.33

nr nr

20.91 29.91

3 pole and earth 16 Amp 32 Amp

10.47 19.67

11.99 22.53

0.65 0.72

18.77 20.80

nr nr

30.77 43.33

3 pole; neutral and earth 16 Amp 32 Amp

14.53 19.03

16.65 21.80

0.72 0.78

20.80 22.53

nr nr

37.44 44.33

8.40 14.63 40.13

9.62 16.76 45.98

0.55 0.60 0.75

15.89 17.33 21.66

nr nr nr

25.51 34.09 67.64

17.15 29.07 70.36

19.64 33.31 80.61

0.42 0.50 0.67

12.13 14.44 19.35

nr nr nr

31.77 47.75 99.96

14.18 27.72

16.24 31.76

0.55 0.60

15.89 17.33

nr nr

32.13 49.09

2 pole and earth 16 Amp 32 Amp 63 Amp

2.02 7.26 34.99

2.31 8.31 40.08

0.55 0.60 0.75

15.89 17.33 21.66

nr nr nr

18.19 25.64 61.74

3 pole and earth 16 Amp 32 Amp 63 Amp

8.04 10.80 35.12

9.21 12.38 40.24

0.65 0.72 0.83

18.77 20.80 23.97

nr nr nr

27.99 33.17 64.21

3 pole; neutral and earth 16 Amp 32 Amp

8.57 13.01

9.82 14.90

0.72 0.78

20.80 22.53

nr nr

30.61 37.43

Angled sockets; surface mounted; Splashproof; 100–130 volts, 50–60 Hz; IP 44 (Yellow)

Plugs; Watertight; 100–130 volts, 50–60 Hz; IP67 (Yellow) 2 pole and earth 16 Amp 32 Amp 63 Amp Connectors; Watertight; 100–130 volts, 50–60 Hz; IP 67 (Yellow) 2 pole and earth 16 Amp 32 Amp 63 Amp Angled sockets; surface mounted; Watertight; 100–130 volts, 50–60 Hz; IP 67 (Yellow) 2 pole and earth 16 Amp 32 Amp Plugs; Splashproof; 200–250 volts, 50–60 Hz; IP 44 (Blue)

578

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V22: GENERAL LV POWER – cont'd ACCESSORIES – cont'd INDUSTRIAL SOCKETS/PLUGS – cont'd Connectors; Splashproof; 200–250 volts, 50–60 Hz; IP 44 (Blue) 2 pole and earth 16 Amp 32 Amp 63 Amp

5.00 12.42 43.85

5.73 14.23 50.24

0.42 0.50 0.67

12.13 14.44 19.35

nr nr nr

17.86 28.67 69.59

3 pole and earth 16 Amp 32 Amp 63 Amp

13.23 17.49 36.08

15.16 20.04 41.33

0.48 0.58 0.75

13.86 16.75 21.66

nr nr nr

29.02 36.79 63.00

3 pole; neutral and earth 16 Amp 32 Amp

15.38 52.68

17.62 60.35

0.52 0.73

15.02 21.08

nr nr

32.64 81.44

2 pole and earth 16 Amp 32 Amp 63 Amp

6.44 9.48 49.01

7.37 10.86 56.15

0.55 0.60 0.75

15.89 17.33 21.66

nr nr nr

23.26 28.19 77.82

3 pole and earth 16 Amp 32 Amp 63 Amp

12.77 22.11 48.70

14.63 25.33 55.79

0.65 0.72 0.83

18.77 20.80 23.97

nr nr nr

33.40 46.13 79.76

3 pole; neutral and earth 16 Amp 32 Amp

11.12 19.46

12.74 22.29

0.72 0.78

20.80 22.53

nr nr

33.53 44.82

8.40 14.62 40.13 102.87

9.62 16.75 45.98 117.85

0.41 0.50 0.66 0.86

11.84 14.44 19.06 24.84

nr nr nr nr

21.47 31.19 65.04 142.69

Angled sockets; surface mounted; Splashproof; 200–250 volts, 50–60 Hz; IP 44 (Blue)

Plugs; Watertight; 200–250 volts, 50–60 Hz; IP67 (Blue) 2 pole and earth 16 Amp 32 Amp 63 Amp 125 Amp

Material Costs/Prices for Measured Works – Electrical Installations

579

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Connectors; Watertight; 200–250 volts, 50–60 Hz; IP 67 (Blue) 2 pole and earth 16 Amp 32 Amp 63 Amp 125 Amp

16.92 26.96 56.65 168.41

19.38 30.89 64.90 192.94

0.42 0.50 0.67 0.87

12.13 14.44 19.35 25.13

nr nr nr nr

31.51 45.33 84.25 218.07

14.18 27.71 145.55

16.24 31.75 166.75

0.55 0.60 1.00

15.89 17.33 28.88

nr nr nr

32.13 49.08 195.63

Angled sockets; surface mounted; Watertight; 200–250 volts, 50–60 Hz; IP 67 (Blue) 2 pole and earth 16 Amp 32 Amp 125 Amp

580

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V32: UNINTERRUPTIBLE POWER SUPPLY Uninterruptible power supply; sheet steel enclosure; self contained battery pack; including installation, testing and commissioning. Single phase input and output; 5 year battery life; standard 13A socket outlet connection 1.0kVA (10 minute supply) 1.0kVA (30 minute supply) 2.0kVA (10 minute supply) 2.0kVA (60 minute supply) 3.0kVA (10 minute supply) 3.0kVA (40 minute supply) 5.0kVA (30 minute supply) 8.0kVA (10 minute supply) 8.0kVA (30 minute supply)

982.67 1719.95 1855.86 3115.73 2424.12 3683.99 5853.07 7471.92 8675.52

1125.81 1970.48 2126.19 3569.58 2777.23 4220.61 6705.65 8560.31 9939.23

0.30 0.50 0.50 0.50 0.50 1.00 1.00 2.00 2.00

8.66 14.44 14.44 14.44 14.44 28.88 28.88 57.76 57.76

nr nr nr nr nr nr nr nr nr

1134.47 1984.93 2140.63 3584.02 2791.67 4249.50 6734.53 8618.07 9997.00

Medium size static; single phase input and output; 10 year battery life; in cubicle 10.0 kVA (10 minutes supply) 10.0 kVA (30 minutes supply) 15.0 kVA (10 minutes supply) 15.0 kVA (30 minutes supply) 20.0 kVA (10 minutes supply) 20.0 kVA (30 minutes supply)

7980.54 9464.04 10315.50 12193.68 13090.68 14012.52

9143.02 10842.61 11818.10 13969.86 14997.52 16053.64

10.00 15.00 10.00 15.00 10.00 15.00

288.82 433.23 288.82 433.23 288.82 433.23

nr nr nr nr nr nr

9431.84 11275.84 12106.92 14403.09 15286.34 16486.87

Medium size static; three phase input and output; 10 year battery life; in cubicle 10.0 kVA (10 minutes supply) 10.0 kVA (30 minutes supply) 15.0 kVA (10 minutes supply) 15.0 kVA (30 minutes supply) 20.0 kVA (10 minutes supply) 20.0 kVA (30 minutes supply) 30.0 kVA (10 minutes supply) 30.0 kVA (30 minutes supply)

9865.62 11393.28 10986.18 13058.94 13529.52 14426.52 14674.92 15709.92

11302.69 13052.87 12586.47 14961.16 15500.28 16527.94 16812.53 17998.29

10.00 15.00 15.00 20.00 20.00 25.00 25.00 30.00

288.82 433.23 433.23 577.64 577.64 722.05 722.05 866.47

nr nr nr nr nr nr nr nr

11591.51 13486.10 13019.70 15538.80 16077.93 17250.00 17534.58 18864.76

14536.92 19071.60 21276.84 26995.56 24493.62 42041.70 62291.82 82322.52 100436.40 115692.30 150914.04

16654.43 21849.65 24376.11 30927.84 28061.46 48165.66 71365.50 94313.95 115066.37 132544.50 172896.78

30.00 30.00 35.00 35.00 40.00 40.00 40.00 50.00 60.00 70.00 80.00

866.47 866.47 1010.88 1010.88 1155.29 1155.29 1155.29 1444.11 1732.93 2021.75 2310.58

nr nr nr nr nr nr nr nr nr nr nr

17520.89 22716.11 25386.99 31938.72 29216.75 49320.95 72520.78 95758.06 116799.30 134566.26 175207.36

Uninterruptible power supply; including final connections and testing and commissioning

Large size static; three phase input and output; 10 year battery life; in cubicle 40 kVA (10 minutes supply) 40 kVA (30 minutes supply) 60 kVA (10 minutes supply) 60 kVA (30 minutes supply) 100 kVA (10 minutes supply) 200 kVA (10 minutes supply) 300 kVA (10 minutes supply) 400 kVA (10 minutes supply) 500 kVA (10 minutes supply) 600 kVA (10 minutes supply) 800 kVA (10 minutes supply)

Material Costs/Prices for Measured Works – Electrical Installations

581

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Integral diesel rotary; three phase input and output; no break supply; including ventilation and accoustic attenuation, oil day tank and interconnecting pipework 100 kVA 125 kVA 150 kVA 180 kVA 200 kVA 250 kVA 300 kVA 400 kVA 500 kVA 630 kVA 800 kVA 1000 kVA 1125 kVA 1250 kVA 1500 kVA 1750 kVA

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

127587.66 144853.42 155745.82 166889.54 245884.70 253465.98 260799.69 307542.81 337730.39 408572.83 493299.91 554352.81 625123.97 658018.72 722203.93 819460.19

146172.59 165953.35 178432.38 191199.34 281701.25 290386.85 298788.82 352340.73 386925.55 468087.18 565155.94 635102.06 716182.03 753868.36 827403.04 938826.04

100.00 100.00 100.00 100.00 100.00 100.00 120.00 120.00 120.00 140.00 140.00 140.00 160.00 160.00 170.00 170.00

2888.22 2888.22 2888.22 2888.22 2888.22 2888.22 3465.86 3465.86 3465.86 4043.51 4043.51 4043.51 4621.15 4621.15 4909.97 4909.97

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

149060.81 168841.57 181320.60 194087.56 284589.47 293275.07 302254.68 355806.59 390391.42 472130.69 569199.45 639145.57 720803.18 758489.51 832313.02 943736.01

582

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V40: EMERGENCY LIGHTING Y73 – LUMINAIRES 24 Volt/50 Volt/110 volt fluorescent slave luminaires For use with DC central battery systems Indoor, 8 Watt Indoor, exit sign box Outdoor, 8 Watt weatherproof Conversion module AC/DC

36.71 45.74 40.92 45.74

42.06 52.41 46.88 52.41

0.80 0.80 0.80 0.25

23.11 23.11 23.11 7.22

nr nr nr nr

65.16 75.51 69.99 59.63

40.54

46.45

1.00

28.88

nr

75.33

58.15

66.62

1.00

28.88

nr

95.51

59.13

67.75

1.00

28.88

nr

96.63

85.94

98.46

1.00

28.88

nr

127.34

110.33 118.77

126.41 136.07

1.00 1.00

28.88 28.88

nr nr

155.29 164.95

38.04

43.58

0.50

14.44

nr

58.02

18.89

21.64

0.50

14.44

nr

36.08

12 Volt low voltage lighting; non maintained; 3 hour standby 2 x 20 Watt lamp load 1 x 50 Watt lamp load

131.44 143.49

150.58 164.39

1.20 1.00

34.66 28.88

nr nr

185.24 193.27

Maintained 3 hour standby 2 x 20 Watt lamp load 1 x 50 Watt lamp load

124.88 136.30

143.07 156.15

1.20 1.00

34.66 28.88

nr nr

177.73 185.04

Self contained; polycarbonate base and diffuser; LED charging light to European sign directive; 3 hour standby Non maintained Indoor, 8 Watt Outdoor, 8 Watt weatherproof, vandal resistant IP65 Maintained Indoor, 8 Watt Outdoor, 8 Watt weatherproof, vandal resistant IP65 Exit signage Exit sign; gold effect, pendular including brackets Non maintained, 8 Watt Maintained, 8 Watt Modification kit Module & battery for 58W fluorescent modification from mains fitting to emergency; 3 hour standby Extra for remote box (when fitting is too small for modification)

Material Costs/Prices for Measured Works – Electrical Installations

583

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

DC central battery systems BS5266 compliant 24/50/110 Volt DC supply to luminaires on mains failure; metal cubicle with battery charger, changeover device and battery as integral unit; ICEL 1001 compliant; 10 year design life valve regulated lead acid battery; 24 hour recharge; LCD display & LED indication; ICEL alarm pack; Includes on-site commissioning on 110 Volt systems only 24 Volt, wall mounted 300 W maintained, 1 hour 635 W maintained, 3 hour 470 W non maintained, 1 hour 780 W non maintained, 3 hour

2089.55 2534.80 1862.82 2201.74

2393.92 2904.03 2134.17 2522.45

4.00 6.00 4.00 6.00

115.53 173.29 115.53 173.29

nr nr nr nr

2509.45 3077.32 2249.70 2695.74

50 Volt 935 W maintained, 3 hour2266.01 1965 W maintained, 3 hour 1311 W non maintained, 3 hour 2510 W non maintained 3, hour

2786.06 2727.63 4165.07

2596.09 3191.89 3124.95 4771.77

8.00 8.00 8.00 8.00

231.06 231.06 231.06 231.06

nr nr nr nr

2827.15 3422.95 3356.01 5002.83

110 Volt 1603 W 4446 W 2492 W 5429 W

3925.50 4482.94 4079.76 6796.87

4497.30 5135.94 4674.03 7786.93

8.00 10.00 10.00 12.00

231.06 288.82 288.82 346.59

nr nr nr nr

4728.36 5424.77 4962.86 8133.51

24 Volt, floor standing 400 W non maintained, 1 hour 600 W maintained, 3 hour

1962.17 2523.12

2247.98 2890.65

4.00 6.00

115.53 173.29

nr nr

2363.51 3063.94

50 Volt 2133 W non maintained, 3 hour 1900 W maintained, 3 hour

4410.49 4215.32

5052.94 4829.34

8.00 8.00

231.06 231.06

nr nr

5284.00 5060.40

110 Volt 2200 W non maintained, 3 hour 4000 W maintained, 3 hour

4079.76 4553.06

4674.03 5216.28

8.00 12.00

231.06 346.59

nr nr

4905.09 5562.86

maintained, 3 hour maintained, 3 hour non maintained, 3 hour non maintained, 3 hour

DC central battery systems; BS EN 50171 compliant; 24/50/110 Volt Central power systems DC supply to luminaires on mains failure; metal cubicle with battery charger, changeover device and battery as integral unit; 10 year design life valve regulated lead acid battery; 12 hour recharge to 80% of specified duty; low volts discount; LCD display & LED indication; includes on-site commissioning for CPS systems only; battery sized for 'end of life' @ 20°C test pushbutton

584

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

V40: EMERGENCY LIGHTING – cont'd LUMINAIRES – cont'd Low Power Systems DC supply to luminaires on mains failure; metal cubicle with battery charger, changeover device and battery as integral unit; 5 Year design life valve regulated lead acid battery; low volts discount; LED display & LED indication; battery sized for 'end of life' @ 20°C test pushbutton 24 Volt, floor standing 300 W non maintained, 1 hour 600 W maintained, 3 hour

2152.24 2382.14

2465.74 2729.14

4.00 6.00

115.53 173.29

nr nr

2581.27 2902.43

One hour 750 VA, 600 W single phase I/P & O/P 3 KVA, 2.55 KW single phase I/P & O/P 5 KVA, 4.25 KW single phase I/P & O/P 8 KVA, 6.80 KW single phase I/P & O/P 10 KVA, 8.5 KW single phase I/P & O/P 13 KVA, 11.05 KW single phase I/P & O/P 15 KVA, 12.75 KW single phase I/P & O/P 20 KVA, 17.0 KW 3 phase I/P & single phase O/P 30 KVA, 25.5 KW 3 phase I/P & O/P 40 KVA, 34.0 KW 3 phase I/P & O/P 50 KVA, 42.5 KW 3 phase I/P & O/P 65 KVA, 55.25 KW 3 phase I/P & O/P 90 KVA, 68.85 KW 3 phase I/P & O/P 120 KVA, 102 KW 3 phase I/P & O/P

2544.15 4174.42 5511.35 6493.02 8381.56 11213.20 11621.06 16050.24 21690.14 27040.23 35266.35 43262.26 57169.19 63815.30

2914.74 4782.48 6314.16 7438.82 9602.45 12846.56 13313.83 18388.18 24849.61 30979.02 40403.39 49564.01 65496.68 73110.89

6.00 8.00 10.00 12.00 14.00 16.00 30.00 40.00 60.00 80.00 90.00 100.00 120.00 150.00

173.29 231.06 288.82 346.59 404.35 462.12 866.47 1155.29 1732.93 2310.58 2599.40 2888.22 3465.86 4332.33

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

3088.03 5013.54 6602.98 7785.41 10006.80 13308.67 14180.30 19543.47 26582.54 33289.59 43002.79 52452.23 68962.55 77443.22

Three hour 750 VA, 600 W single phase I/P & O/P 3 KVA, 2.55 KW single phase I/P & O/P 5 KVA, 4.25 KW single phase I/P & O/P 8 KVA, 6.80 KW single phase I/P & O/P 10 KVA, 8.5 KW single phase I/P & O/P 13 KVA, 11.05 KW single phase I/P & O/P 15 KVA, 12.75 KW single phase I/P & O/P 20 KVA, 17.0 KW 3 phase I/P & single phase O/P 30 KVA, 25.5 KW 3 phase I/P & O/P 40 KVA, 34.0 KW 3 phase I/P & O/P 50 KVA, 42.5 KW 3 phase I/P & O/P 65 KVA, 55.25 KW 3 phase I/P & O/P 90 KVA, 68.85 KW 3 phase I/P & O/P 120 KVA, 102 KW 3 phase I/P & O/P

2977.72 5010.01 7941.98 9880.94 13033.95 16071.27 16334.22 23782.03 35543.32 42495.62 57316.44 69300.95 82017.02 101088.23

3411.47 5739.79 9098.84 11320.24 14932.53 18412.28 18713.53 27246.22 40720.70 48685.70 65665.38 79395.60 93963.95 115813.15

6.00 8.00 10.00 12.00 14.00 16.00 30.00 40.00 60.00 80.00 90.00 100.00 120.00 150.00

173.29 231.06 288.82 346.59 404.35 462.12 866.47 1155.29 1732.93 2310.58 2599.40 2888.22 3465.86 4332.33

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

3584.76 5970.85 9387.66 11666.82 15336.88 18874.39 19579.99 28401.50 42453.63 50996.28 68264.78 82283.82 97429.81 120145.48

AC static inverter system; BS5266 compliant; one hour standby Central system supplying AC power on mains failure to mains luminaires; ICEL 1001 compliant metal cubicle(s) with changeover device, battery charger, battery & static inverter; 10 year design Llfe valve regulated lead acid battery; 24 hour recharge; LED indication and LCD display; pure sinewave output

Material Costs/Prices for Measured Works – Electrical Installations

585

V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

AC static inverter system; BS EN 50171 compliant; one hour standby; Low power system (typically wall mounted) Central system supplying AC power on mains failure to mains luminaires; metal cubicle(s) with changeover device, battery charger, battery & static inverter; 5 year design life valve regulated lead acid battery; LED indication and LCD display; 12 hour recharge to 80% duty; inverter rated for 120% of load for 100% of duty; battery sized for 'end of life' @ 20°C test pushbutton One hour 300 VA, 240 W single phase I/P & O/P 600 VA, 480 W single phase I/P & O/P 750 VA, 600 W single phase I/P & O/P

1145.28 1379.01 2544.15

1312.11 1579.88 2914.74

3.00 4.00 6.00

86.65 115.53 173.29

nr nr nr

1398.75 1695.41 3088.03

Three hour 150 VA, 120 W single phase I/P & O/P 450 VA, 360 W single phase I/P & O/P 750 VA, 600 W single phase I/P & O/P

1262.14 1495.87 2977.72

1445.99 1713.76 3411.47

3.00 4.00 6.00

86.65 115.53 173.29

nr nr nr

1532.63 1829.29 3584.76

2848.00 4536.69 5873.63 6855.31 8802.27 11633.91 12041.77

3262.85 5197.52 6729.21 7853.88 10084.44 13328.55 13795.82

6.00 8.00 10.00 12.00 14.00 16.00 30.00

173.29 231.06 288.82 346.59 404.35 462.12 866.47

nr nr nr nr nr nr nr

3436.14 5428.58 7018.03 8200.47 10488.79 13790.67 14662.29

16587.82 22344.59 27694.66 36066.88 44547.77 58454.71 65100.81

19004.07 25599.39 31728.78 41320.53 51036.78 66969.46 74583.65

40.00 60.00 80.00 90.00 100.00 120.00 150.00

1155.29 1732.93 2310.58 2599.40 2888.22 3465.86 4332.33

nr nr nr nr nr nr nr

20159.36 27332.32 34039.35 43919.92 53925.00 70435.32 78915.98

AC static inverter system central power system; CPS BS EN 50171 compliant; one hour standby Central system supplying AC power on mains failure to mains luminaires; metal cubicle(s) with changeover device, battery charger, battery & static inverter; LED indication and LCD display; pure sinewave output; 10 year design life valve regulated lead acid battery; 12 hour recharge to 80% duty specified; unverter rated for 120% of load for 100% of duty; battery sized for 'end of life' @ 20°C test push button; includes on-site commissioning One hour 750 VA, 600 W single phase I/P & O/P 3 KVA, 2.55 KW single phase I/P & O/P 5 KVA, 4.25 KW single phase I/P & O/P 8 KVA, 6.80 KW single phase I/P & O/P 10 KVA, 8.5 KW single phase I/P & O/P 13 KVA, 11.05 KW single phase I/P & O/P 15 KVA, 12.75 KW single phase I/P & O/P 20 KVA, 17.0 KW 3 phase I/P & single phase O/P 30 KVA, 25.5 KW 3 phase I/P & O/P 40 KVA, 34.0 KW 3 phase I/P & O/P 50 KVA, 42.5 KW 3 phase I/P & O/P 65 KVA, 55.25 KW 3 phase I/P & O/P 90 KVA, 68.85 KW 3 phase I/P & O/P 120 KVA, 102 KW 3 phase I/P & O/P

586

Material Costs/Prices for Measured Works – Electrical Installations V: ELECTRICAL SUPPLY/POWER/LIGHTING-SYSTEMS

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

3281.57 5372.28 8324.30 10243.21 13454.66 16491.99 16754.93

3759.58 6154.83 9536.85 11735.28 15414.52 18894.28 19195.52

6.00 8.00 10.00 12.00 14.00 16.00 30.00

173.29 231.06 288.82 346.59 404.35 462.12 866.47

nr nr nr nr nr nr nr

3932.87 6385.89 9825.67 12081.86 15818.87 19356.39 20061.99

24319.61 36197.76 43150.07 58116.96 70586.46 87754.54 102373.74

27862.10 41470.47 49435.48 66582.51 80868.37 100537.22 117285.91

40.00 60.00 80.00 90.00 100.00 120.00 150.00

1155.29 1732.93 2310.58 2599.40 2888.22 3465.86 4332.33

nr nr nr nr nr nr nr

29017.39 43203.40 51746.06 69181.91 83756.59 104003.08 121618.24

V40: EMERGENCY LIGHTING – cont'd LUMINAIRES – cont'd Low Power Systems – cont'd Central system supplying AC power on mains failure to mains luminaires – cont'd Three hour 750 VA, 600 W single phase I/P & O/P 3 KVA, 2.55 KW single phase I/P & O/P 5 KVA, 4.25 KW single phase I/P & O/P 8 KVA, 6.80 KW single phase I/P & O/P 10 KVA, 8.5 KW single phase I/P & O/P 13 KVA, 11.05 KW single phase I/P & O/P 15 KVA, 12.75 KW single phase I/P & O/P 20 KVA, 17.0 KW 3 phase I/P & single phase O/P 30 KVA, 25.5 KW 3 phase I/P & O/P 40 KVA, 34.0 KW 3 phase I/P & O/P 50 KVA, 42.5 KW 3 phase I/P & O/P 65 KVA, 55.25 KW 3 phase I/P & O/P 90 KVA, 68.85 KW 3 phase I/P & O/P 120 KVA, 102 KW 3 phase I/P & O/P

Material Costs/Prices for Measured Works – Electrical Installations

587

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W10: TELECOMMUNICATIONS Y61 – CABLES Multipair internal telephone cable; BS 6746; loose laid on tray / basket 0.5 millimetre diameter conductor LSZH insulated and sheathed multipair cables; BT specification CW 1308 3 pair 4 pair 6 pair 10 pair 15 pair 20 pair + 1 wire 25 pair 40 pair + earth 50 pair + earth 80 pair + earth 100 pair + earth

0.11 0.13 0.19 0.39 0.49 0.65 0.80 1.24 1.62 2.53 3.13

0.13 0.16 0.23 0.48 0.60 0.80 0.98 1.52 1.98 3.10 3.83

0.03 0.03 0.03 0.05 0.06 0.06 0.08 0.08 0.10 0.10 0.12

0.87 0.87 0.87 1.44 1.73 1.73 2.31 2.31 2.89 2.89 3.47

m m m m m m m m m m m

1.00 1.03 1.10 1.92 2.33 2.53 3.29 3.83 4.87 5.99 7.30

0.11 0.13 0.19 0.39 0.49 0.65 0.80 1.24 1.62 2.53 3.13

0.13 0.16 0.23 0.48 0.60 0.80 0.98 1.52 1.98 3.10 3.83

0.05 0.06 0.06 0.07 0.07 0.09 0.10 0.12 0.14 0.14 0.15

1.44 1.73 1.73 2.02 2.02 2.60 2.89 3.47 4.04 4.04 4.33

m m m m m m m m m m m

1.58 1.89 1.97 2.50 2.62 3.40 3.87 4.98 6.03 7.14 8.16

Installed in riser 25 pair 24AWG 50 pair 24AWG 100 pair 24AWG

1.52 3.03 5.10

1.86 3.71 6.24

0.03 0.06 0.10

0.87 1.73 2.89

m m m

2.73 5.44 9.13

Installed below floor 25 pair 24AWG 50 pair 24AWG 100 pair 24AWG

1.52 3.03 5.10

1.86 3.71 6.24

0.02 0.05 0.08

0.58 1.44 2.31

m m m

2.44 5.15 8.56

Multipair internal telephone cable; BS 6746; installed in conduit / trunking 0.5 millimetre diameter conductor LSZH insulated and sheathed multipair cables; BT specification CW 1308 3 pair 4 pair 6 pair 10 pair 15 pair 20 pair + 1 wire 25 pair 40 pair + earth 50 pair + earth 80 pair + earth 100 pair + earth Low speed data; unshielded twisted pair; solid copper conductors; LSOH sheath; nominal impedance 100 Ohm; Category 3 to ISO IS 1801/EIA/TIA 568B and EN50173/50174 standards to current revisions

588

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W10: TELECOMMUNICATIONS – cont'd Y74 – ACCESSORIES Telephone outlet: moulded plastic plate with box; fitted and connected; flush or surface mounted Single master outlet Single secondary outlet

6.08 4.49

7.32 5.41

0.35 0.35

10.11 10.11

nr nr

17.42 15.51

Telephone outlet: bronze or satin chromeplate; with box; fitted and connected; flush or surface mounted Single master outlet Single secondary outlet

9.90 10.82

11.91 13.02

0.35 0.35

10.11 10.11

nr nr

22.02 23.12

218.90 1.38

268.03 1.69

1.50 0.27

43.32 7.80

nr nr

311.35 9.49

18.98 0.45

23.24 0.55

0.25 0.08

7.22 2.40

nr nr

30.46 2.95

10.10 0.45

12.37 0.55

0.17 0.08

4.79 2.40

nr nr

17.16 2.95

47.50 64.75

58.16 79.28

2.60 4.65

75.09 134.30

nr nr

133.25 213.58

535.00

655.07

25.00

722.05

nr

1377.12

4.25

5.20

0.50

14.44

nr

19.64

0.16

0.20

0.02

0.58

nr

0.77

0.05 -

0.06 -

0.06 0.04

1.73 1.16

nr nr

1.79 1.16

Frames and Box Connections Provision and Installation of a Dual Vertical Krone 108A Voice Distribution Frame that can accommodate a total of 138 x Krone 237A Strips Label Frame (traffolyte style) Provision and Installation of a Box Connection 301A Voice Termination Unit that can accommodate a total of 10 x Krone 237A Strips Label Frame (traffolyte style) Provision and Installation of a Box Connection 201 Voice Termination Unit that can accommodate 20 pairs Label Frame (traffolyte style) Terminate, Test and Label Voice Multicore Patch Panels Voice; 19" wide fully loaded, finished in black including termination and forming of cables (assuming 2 pairs per port) 25 port – RJ45 UTP – Krone 50 port – RJ45 UTP – Krone 900 pair fully loaded Systimax style of frame including forming and termination of 9 x 100 pair cables Installation and termination of Krone Strip (10 pair block – 237A) including designation label strip Patch panel and Outlet abelling per port (traffolyte style) Provision and installation of a voice jumper, for cross termination on Krone termination Strips CW1308 / Cat 3 cable circuit test per pair

Material Costs/Prices for Measured Works – Electrical Installations

589

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W20: RADIO/TELEVISION Y61 – CABLES RADIO Radio Frequency Cable; BS 2316 ; PVC sheathed; laid loose 7/0.41mm tinned copper inner conductor; solid polyethylene dielectric insulation; bare copper wire braid; PVC sheath; 75 ohm impedance Cable

1.10

1.26

0.05

1.44

m

2.70

Twin 1/0.58mm copper covered steel solid core wire conductor; solid polyethylene dielectric insulation; barecopper wire braid; PVC sheath; 75 ohm impedance Cable

1.57

1.80

0.05

1.44

m

3.24

General purpose TV aerial downlead; copper stranded inner conductor; cellular polythene insulation; copper braid outer conductor; 75 ohm impedance 7/0.25mm

0.29

0.33

0.06

1.73

m

2.07

Low loss TV aerial downlead; solid copper inner conductor; cellular polythene insulation; copper braid outer; conductor; 75 ohm impedance 1/1.12mm

0.47

0.54

0.06

1.73

m

2.27

Low loss air spaced; solid copper inner conductor; air spaced polythene insulation; copper braid outer conductor; 75 ohm impedance 1/1.00mm

0.28

0.32

0.06

1.73

m

2.05

Satelite aerial downlead; solid copper inner conductor; air spaced polythene insulation; copper tape and braid outer conductor; 75 ohm impedance 1/1.00mm

0.59

0.68

0.06

1.73

m

2.41

Satelite TV coaxial; solid copper inner conductor; semi air spaced polyethylene dielectric insulation; plain annealed copper foil and copper braid screen in outer conductor; PVC sheath; 75 ohm impedance 1/1.25mm

0.78

0.89

0.08

2.31

m

3.20

TELEVISION Television aerial cable; coaxial; PVC sheathed; fixed to backgrounds

590

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W20: RADIO/TELEVISION – cont'd CABLES – cont'd TELEVISION – cont'd Television aerial cable; coaxial; PVC sheathed; fixed to backgrounds – cont'd Satelite TV coaxial; solid copper inner conductor; air spaced polyethylene dielectric insulation; plain annealed copper foil and copper braid screen in outer conductor; PVC sheath; 75 ohm impedance 1/1.67mm

1.29

1.48

0.09

2.60

m

4.08

0.74

0.85

0.05

1.44

m

2.29

7.08 9.87 12.46 16.98

8.51 11.87 14.99 20.42

0.35 0.35 0.35 0.35

10.11 10.11 10.11 10.11

nr nr nr nr

18.62 21.98 25.10 30.53

Video cable; PVC flame retardant sheath; laid loose 7/0.1mm silver coated copper covered annealed steel wire conductor; polyethylene dielectric insulation with tin coated copper wire braid; 75 ohm impedance Cable Y74 – ACCESSORIES TV co-axial socket outlet: moulded plastic box; flush or surface mounted One way Direct Connection Two way Direct Connection One way Isolated UHF/VHF Two way Isolated UHF/VHF

Material Costs/Prices for Measured Works – Electrical Installations

591

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W23: CLOCKS Clock timing systems; master and slave units; fixed to background; excluding supports and fixings Quartz master clock with solid state digital readout for parallel loop operation; one minute, half minute and one second pulse; maximum of 160 clocks Over two loops only

630.00

721.77

4.40

127.08

nr

848.85

Power supplies for above, giving 24 hours power reserve 2 6 Amp hour batteries 2 15 Amp hour batteries

183.75 210.00

210.52 240.59

3.00 5.00

86.65 144.41

nr nr

297.16 385.00

Radio receiver to accept BBC Rugby Transmitter MSF signal To synchronise time of above Quartz master clock

136.50

156.38

7.04

203.40

nr

359.78

Wall clocks for slave (impulse) systems; 24V DC, white dial with black numerals fitted with axispolycarbonate disc; BS 467.7 Class O 305mm diameter 1 minute impulse 305mm diameter 1/2 minute impulse 227mm diameter 1 second impulse 305mm diameter 1 second impulse

55.17 55.17 78.75 78.75

63.21 63.21 90.22 90.22

1.37 1.37 1.37 1.37

39.57 39.57 39.57 39.57

nr nr nr nr

102.77 102.77 129.79 129.79

Quartz battery movement; BS 467.7 Class O; white dial with black numerals and sweep second hand; fitted with axispolycarbonate disc; stove enamel case 305mm diameter

28.88

33.09

0.77

22.24

nr

55.33

Internal wall mounted electric clock; white dial with black numerals; 240v, 50 Hz 305mm diameter 458mm diameter

36.75 157.50

42.10 180.44

1.00 1.00

28.88 28.88

nr nr

70.99 209.32

Matching clock; BS 467.7 Class O; 240V AC, 50/60 Hz mains supply; 12 hour duration; dial with 1–12; IP 66; axispolycarbonate disc; spun metal movement cover; semi flush mount on 6 point fixing bezel 227mm diameter

210.00

240.59

0.62

17.91

nr

258.50

210.00

240.59

0.57

16.46

nr

257.05

183.75 178.50 152.25

451.11 638.13 403.56

0.57 0.57 0.57

16.46 16.46 16.46

nr nr nr

467.57 654.60 420.02

Digital clocks; 240V, 50 hz supply; with/without synchronisation from masterclock;12/24 hour display; stand alone operation; 50mm digits Flush – hours/minutes/seconds or minutes/seconds/10th seconds Surface – hours/minutes/seconds or minutes/seconds/10th seconds Flush – hours/minutes or minutes/seconds Surface – hours/minutes or minutes/seconds

592

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W30: DATA TRANSMISSION Cabinets Floor standing; suitable for 19" patch panels with glass lockable doors, metal rear doors, side panels, vertical cable management, 2 x 4 way PDU's, 4 way fan, earth bonding kit; installed on raised floor 600 wide x 800 deep – 18U 600 wide x 800 deep – 24U 600 wide x 800 deep – 33U 600 wide x 800 deep – 42U 600 wide x 800 deep – 47U 800 wide x 800 deep – 42U 800 wide x 800 deep – 47U Label cabinet

655.20 682.50 733.00 786.25 830.00 890.00 928.25 2.10

849.59 884.99 950.48 1019.53 1076.26 1154.06 1203.66 2.72

3.00 3.00 4.00 4.00 4.00 4.00 4.00 0.25

86.65 86.65 115.53 115.53 115.53 115.53 115.53 7.22

nr nr nr nr nr nr nr nr

936.24 971.64 1066.00 1135.05 1191.78 1269.59 1319.18 9.94

Wall mounted; suitable for 19" patch panels with glass lockable doors, side panels, vertical cable management, 2 x 4 way PDU's, 4 way fan, earth bonding kit; fixed to wall 19 wide x 500 deep – 9U 19 wide x 500 deep – 12U 19 wide x 500 deep – 15U 19 wide x 500 deep – 18U 19 wide x 500 deep – 21U Label cabinet

437.00 447.75 464.00 546.00 568.00 2.10

566.65 580.59 601.67 707.99 736.52 2.72

3.00 3.00 3.00 3.00 3.00 0.25

86.65 86.65 86.65 86.65 86.65 7.22

nr nr nr nr nr nr

653.30 667.24 688.31 794.64 823.17 9.94

491.50 600.50 655.25 710.00 2.10

637.32 778.66 849.66 920.65 2.72

2.50 2.50 2.50 2.50 0.25

72.21 72.21 72.21 72.21 7.22

nr nr nr nr nr

709.53 850.87 921.86 992.86 9.94

0.14

0.19

0.02

0.58

m

0.76

0.14

0.19

0.02

0.58

m

0.76

0.14

0.19

0.01

0.29

m

0.48

0.14

0.19

0.02

0.58

m

0.76

Frames Floor standing; suitable for 19" patch panels with supports, vertical cable management, earth bonding kit; installed on raised floor 19 wide x 500 deep – 25U 19 wide x 500 deep – 39U 19 wide x 500 deep – 42U 19 wide x 500 deep – 47U Label frame Copper Data Cabling Unshielded twisted pair; solid copper conductors; PVC insulation; nominal impedance 100 Ohm; Cat 5e to ISO 11801, EIA/TIA 568B and EN 50173/50174 standards to the current revisions 4 pair 24AWG; nominal outside diameter 5.6mm; installed above ceiling 4 pair 24AWG; nominal outside diameter 5.6mm; installed in riser 4 pair 24AWG; nominal outside diameter 5.6mm; installed below floor 4 pair 24AWG; nominal outside diameter 5.6mm; installed in trunking

Material Costs/Prices for Measured Works – Electrical Installations

593

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Unshielded twisted pair; solid copper conductors; LSOH sheathed; nominal impedance 100 Ohm; Cat 5e to ISO 11801, EIA/ TIA 568B and EN 50173/50174 standards to the current revisions 4 pair 24AWG; nominal outside diameter 5.6mm; installed above ceiling 4 pair 24AWG; nominal outside diameter 5.6mm; installed in riser 4 pair 24AWG; nominal outside diameter 5.6mm; installed below floor 4 pair 24AWG; nominal outside diameter 5.6mm; installed in trunking

0.22

0.28

0.02

0.58

m

0.86

0.22

0.28

0.02

0.58

m

0.86

0.22

0.28

0.01

0.29

m

0.57

0.22

0.28

0.02

0.58

m

0.86

Unshielded twisted pair; solid copper conductors; PVC insulation; nominal impedance 100 Ohm; Cat 6 to ISO 11801, EIA/TIA 568B and EN 50173/50174 standards to the current revisions 4 pair 24AWG; nominal outside diameter 5.6mm; installed above ceiling 4 pair 24AWG; nominal outside diameter 5.6mm; installed in riser 4 pair 24AWG; nominal outside diameter 5.6mm; installed below floor 4 pair 24AWG; nominal outside diameter 5.6mm; installed in trunking

0.23

0.29

0.02

0.43

m

0.73

0.23

0.29

0.02

0.43

m

0.73

0.23

0.29

0.01

0.23

m

0.52

0.23

0.29

0.02

0.58

m

0.87

Unshielded twisted pair; solid copper conductors; LSOH sheathed; nominal impedance 100 Ohm; Cat 6 to ISO 11801, EIA/ TIA 568B and EN 50173/50174 standards to the current revisions 4 pair 24AWG; nominal outside diameter 5.6mm; installed above ceiling 4 pair 24AWG; nominal outside diameter 5.6mm; installed in riser 4 pair 24AWG; nominal outside diameter 5.6mm; installed below floor 4 pair 24AWG; nominal outside diameter 5.6mm; installed in trunking

0.27

0.35

0.02

0.64

m

0.98

0.27

0.35

0.02

0.64

m

0.98

0.27

0.35

0.01

0.32

m

0.67

0.27

0.35

0.02

0.64

m

0.98

69.00 129.50 0.22

89.47 167.92 0.29

4.75 9.35 0.02

137.19 270.05 0.58

nr nr nr

226.66 437.97 0.86

132.00 240.50 0.22

171.16 311.85 0.29

5.00 9.80 0.02

144.41 283.05 0.58

nr nr nr

315.57 594.90 0.86

Patch panels Category 5e; 19" wide fully loaded, finished in black including termination and forming of cables 24 port – RJ45 UTP – Krone / 110 48 port – RJ45 UTP – Krone / 110 Patch panel labelling per port Category 6; 19" wide fully loaded, finished in black including termination and forming of cables 24 port – RJ45 UTP – Krone / 110 48 port – RJ45 UTP – Krone / 110 Patch panel labelling per port

594

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W30: DATA TRANSMISSION – cont'd Work Station Category 5e RJ45 data outlet plate and multiway outlet boxes for wall, ceiling and below floor installations including label to ISO 11801 standards Wall mounted; fully loaded One gang LSOH PVC plate Two gang LSOH PVC plate Four gang LSOH PVC plate One gang satin brass plate Two gang satin brass plate

5.97 8.55 14.63 14.94 16.84

7.75 11.09 18.97 19.37 21.84

0.15 0.20 0.40 0.25 0.33

4.33 5.78 11.55 7.22 9.53

nr nr nr nr nr

12.08 16.86 30.52 26.59 31.37

Ceiling mounted; fully loaded One gang metal clad plate Two gang metal clad plate

7.93 10.76

10.28 13.96

0.33 0.45

9.53 13.00

nr nr

19.82 26.95

26.80

34.75

0.80

23.11

nr

57.86

34.65

44.93

1.20

34.66

nr

79.59

43.62 -

56.56 -

1.40 0.40

40.44 11.55

nr nr

97.00 11.55

Wall mounted; fully loaded One gang LSOH PVC plate Two gang LSOH PVC plate Four gang LSOH PVC plate One gang satin brass plate Two gang satin brass plate

8.38 12.30 22.21 14.35 17.95

10.87 15.95 28.80 18.60 23.28

0.17 0.22 0.44 0.28 0.36

4.77 6.35 12.71 7.94 10.48

nr nr nr nr nr

15.64 22.30 41.50 26.55 33.76

Ceiling mounted; fully loaded One gang metal clad plate Two gang metal clad plate

9.52 13.43

12.34 17.42

0.36 0.50

10.48 14.30

nr nr

22.83 31.71

32.85

42.59

0.88

25.42

nr

68.01

43.69

56.66

1.32

38.12

nr

94.78

55.65 -

72.16 -

1.54 0.40

44.48 11.55

nr nr

116.64 11.55

-

-

0.10 0.11

2.89 3.18

nr

2.89 3.18

Below floor; fully loaded Four way outlet box, 5 m length 20mm flexible conduit with glands and starin relief bracket Six way outlet box, 5 m length 25mm flexible conduit with glands and strain relief bracket Eight way outlet box, 5 m length 25mm flexible conduit with glands and strain relief bracket Installation of outlet boxes to desks Category 6 RJ45 data outlet plate and multiway outlet boxes for wall, ceiling and below floor installations including label to ISO 11801 standards

Below floor; fully loaded Four way outlet box, 5 m length 20mm flexible conduit with glands and starin relief bracket Six way outlet box, 5 m length 25mm flexible conduit with glands and strain relief bracket Eight way outlet box, 5 m length 25mm flexible conduit with glands and strain relief bracket Installation of outlet boxes to desks Category 5e cable test Category 6 cable test

Material Costs/Prices for Measured Works – Electrical Installations

595

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

Copper Patch Leads Category 5e; straight through booted RJ45 UTP – RJ45 UTP Patch lead 1m length Patch lead 3m length Patch lead 5m length Patch lead 7m length

1.65 1.96 2.78 4.07

2.14 2.54 3.61 5.28

0.09 0.09 0.10 0.10

2.60 2.60 2.89 2.89

nr nr nr nr

4.74 5.14 6.49 8.16

Category 6; straight through booted RJ45 UTP – RJ45 UTP Patch lead 1 m length Patch lead 3 m length Patch lead 5 m length Patch lead 7 m length

4.38 6.59 7.72 9.79

5.68 8.55 10.02 12.69

0.09 0.09 0.10 0.10

2.60 2.60 2.89 2.89

nr nr nr nr

8.28 11.15 12.91 15.58

Fibre optic cable, tight buffered, internal/external application, single mode, LSOH sheathed 4 core fibre optic cable 8 core fibre optic cable 12 core fibre optic cable 16 core fibre optic cable 24 core fibre optic cable

1.35 2.24 2.78 3.38 4.08

1.75 2.90 3.61 4.38 5.29

0.10 0.10 0.10 0.10 0.10

2.89 2.89 2.89 2.89 2.89

m m m m m

4.64 5.79 6.49 7.27 8.18

Fibre optic cable OM1 and OM2, tight buffered, internal/external application, 62.5/125 multimode fibre, LSOH sheathed 4 core fibre optic cable 8 core fibre optic cable 12 core fibre optic cable 16 core fibre optic cable 24 core fibre optic cable

1.44 2.39 3.04 3.78 4.37

1.87 3.10 3.94 4.90 5.66

0.10 0.10 0.10 0.10 0.10

2.89 2.89 2.89 2.89 2.89

m m m m m

4.76 5.99 6.83 7.79 8.55

Fibre optic cable OM3, tight buffered, internal only application, 50/125 multimode fibre, LSOH sheathed 4 core fibre optic cable 8 core fibre optic cable 12 core fibre optic cable 24 core fibre cable

1.78 2.78 4.03 7.70

2.31 3.61 5.22 9.99

0.10 0.10 0.10 0.10

2.89 2.89 2.89 2.89

nr nr nr nr

5.20 6.49 8.11 12.88

Note 1: With an intelligent Patching System, add a 25% uplift to the Cat5e and Cat 6 System price. This would be dependant on the System and IMS solution chosen, i.e. iPatch, RIT or iTRACs Note 2: For a Cat 6 augmented solution (10Gbps capable), add 25% to a Cat 6 System price Fibre Infrastructure

596

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W30: DATA TRANSMISSION – cont'd Fibre optic single and multimode connectors and couplers including termination ST singlemode booted connector ST multimode booted connector SC simplex singlemode booted connector SC simplex multimode booted connector SC duplex multimode booted connector ST – SC duplex adaptor ST inline bulkhead coupler SC duplex coupler MTRJ small form factor duplex connector LC simplex multimode booted connector Singlemode core test per core Multimode core test per core

6.78 3.28 9.61 3.50 6.99 17.00 3.64 6.80 7.10 -

8.79 4.25 12.46 4.54 9.07 22.04 4.71 8.81 9.20 -

0.25 0.25 0.25 0.25 0.25 0.01 0.01 0.01 0.25 0.25 0.20 0.20

7.22 7.22 7.22 7.22 7.22 0.29 0.29 0.29 7.22 7.22 5.78 5.78

nr nr nr nr nr nr nr nr nr nr nr nr

16.01 11.47 19.68 11.76 16.29 22.33 5.00 9.10 16.42 7.22 5.78 5.78

68.78 103.16 143.32 87.50 120.25 158.25 82.00 120.00 147.50 103.75 142.00 169.25 93.00 142.00 169.25 97.50 149.00 177.75 0.22

89.19 133.77 185.84 113.46 155.93 205.20 106.33 155.60 191.26 134.53 184.13 219.47 120.59 184.13 219.47 126.43 193.21 230.49 0.29

0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.02

14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 0.58

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

103.63 148.21 200.28 127.90 170.37 219.64 120.77 170.04 205.70 148.97 198.57 233.91 135.03 198.57 233.91 140.87 207.65 244.93 0.86

Single Mode Duplex OS1 LC – LC Fibre patch lead 1 m length Fibre patch lead 3 m length Fibre patch lead 5 m length

19.64 21.34 22.42

25.47 27.67 29.08

0.08 0.08 0.10

2.31 2.31 2.89

nr nr nr

27.78 29.98 31.96

Multi Mode Duplex 50/125 OM3 MTRJ – MTRJ Fibre patch lead 1m length Fibre patch lead 3m length Fibre patch lead 5m length

21.98 23.92 25.11

28.50 31.01 32.56

0.08 0.08 0.10

2.31 2.31 2.89

nr nr nr

30.81 33.32 35.45

Duplex 50/125 OM3 ST – ST Fibre patch lead 1m length Fibre patch lead 3m length Fibre patch lead 5m length

23.55 25.62 26.91

30.53 33.22 34.90

0.08 0.08 0.10

2.31 2.31 2.89

nr nr nr.

32.84 35.53 37.79

Duplex 50/125 OM3 SC – SC Fibre patch lead 1m length

20.93

27.14

0.08

2.31

nr

29.45

Fibre; 19" wide fully loaded, labled, alluminium alloy c/w couplers, fibre management and glands (excludes termination of fibre cores) 8 way ST; fixed drawer 16 way ST; fixed drawer 24 way ST; fixed drawer 8 way ST; sliding drawer 16 way ST; sliding drawer 24 way ST; sliding drawer 8 way (4 duplex) SC; fixed drawer 16 way (8 duplex) SC; fixed drawer 24 way (12 duplex) SC; fixed drawer 8 way (4 duplex) SC; sliding drawer 16 way (8 duplex) SC; sliding drawer 24 way (12 duplex) SC; sliding drawer 8 way (4 duplex) MTRJ; fixed drawer 16 way (8 duplex) MTRJ; fixed drawer 24 way (12 duplex) MTRJ; fixed drawer 8 way (4 duplex) FC/PC; fixed drawer 16 way (8 duplex) FC/PC; fixed drawer 24 way (12 duplex) FC/PC; fixed drawer Patch panel label per way Fibre Patch Leads

Material Costs/Prices for Measured Works – Electrical Installations

597

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Firbe patch lead 3m length Fibre patch lead 5m length Duplex 50/125 OM3 LC – LC Fibre patch lead 1 m length Fibre patch lead 3 m length Fibre patch lead 5 m length

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

22.77 23.93

29.53 31.03

0.08 0.10

2.31 2.89

nr nr

31.84 33.91

26.16 28.46 29.90

33.92 36.90 38.77

0.08 0.08 0.10

2.31 2.31 2.89

nr nr nr

36.23 39.21 41.66

598

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W40: ACCESS CONTROL ACCESS CONTROL EQUIPMENT Equipment to control the movement of personnel into defined spaces; includes fixing to backgrounds, termination of power and data cables; excludes cable containment and cable installation Access control Magnetic swipe reader Proximity reader Exit button Exit PIR Emergency break glass double pole Alarm contact flush Alarm contact surface Reader controller 16 door Reader controller 8 door Reader controller 2 door Reader interface Lock power supply 12 volt 3 AMP Lock power supply 24 volt 3 AMP Rechargeable battery 12 volt 7ah Lock Equipment Single slimline magnetic lock, monitored Single slimline magnetic lock, unmonitored Double slimline magnetic lock, monitored Double slimline magnetic lock, unmonitored Standard single magnetic lock, monitored Standard single magnetic lock, unmonitored Standard single magnetic lock, double monitored Standard double magnetic lock, monitored Standard double magnetic lock, unmonitored 12V electric release fail safe, monitored 12V electric release fail secure, monitored Solenoid bolt Electric mortice lock

136.50 55.55 12.03 40.80 16.49 1.52 1.48 2838.76 1794.93 495.60 260.97 57.77 66.31 11.75

156.38 63.64 13.78 46.74 18.89 1.74 1.70 3252.27 2056.39 567.79 298.98 66.19 75.97 13.46

1.50 1.50 1.50 2.00 1.00 1.00 1.00 4.00 4.00 4.00 1.50 2.00 2.00 0.25

63.61 63.61 63.61 84.81 42.41 42.41 42.41 169.62 169.62 169.62 63.61 84.81 84.81 10.60

nr nr nr nr nr nr nr nr nr nr nr nr nr nr

219.99 127.25 77.39 131.56 61.30 44.15 44.10 3421.89 2226.01 737.42 362.59 151.00 160.78 24.06

48.35 45.76 96.72 91.52 61.62 54.47

55.39 52.43 110.81 104.85 70.60 62.40

2.00 1.75 4.00 4.50 1.25 1.00

84.81 74.21 169.62 190.83 53.01 42.41

nr nr nr nr nr nr

140.21 126.64 280.43 295.68 123.60 104.81

90.14 128.44 110.89 37.14 37.14 72.86 278.46

103.27 147.15 127.04 42.55 42.55 83.47 319.02

1.50 1.50 1.25 1.25 1.00 1.50 1.00

63.61 63.61 53.01 53.01 42.41 63.61 42.41

nr nr nr nr nr nr nr

166.88 210.76 180.05 95.56 84.96 147.08 361.43

Material Costs/Prices for Measured Works – Electrical Installations

599

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W41: SECURITY DETECTION AND ALARM SECURITY DETECTION AND ALARM EQUIPMENT Detection and alarm systems for the protection of property and persons; includes fixing of equipment to backgrounds and termination of power and data cabling; excludes cable containment and cable installation Detection, alarm equipment Alarm contact flush Alarm contact surface Roller shutter contact Personal attack button Acoustic break glass detectors Vibration detectors 12 metre PIR detector 15 metre dual detector 8 zone alarm panel 8-24 zone end station Remote keypad 8 zone expansion Final exit set button Self contained external sounder Internal loudspeaker Rechargeable battery 12 volt 7ah (ampere hours) Surveillance Equipment Vandal resistant camera, colour External camera, colour Auto dome external, colour Auto dome external, colour/monochrome Auto dome internal, colour Auto dome internal colour/monochrome Mini internal domes Camera switcher, 32 inputs Full function keyboard 16 CH multiplexors, duplex 16 way DVR, 250 GB harddrive 16 way DVR, 500 GB harddrive 16 way DVR, 750 GB harddrive 10" colour monitor 15" colour monitor 17" colour monitor, high resolution 21" colour monitor, high resolution

5.85 4.92 14.15 7.87 24.44 11.33 21.50 24.19 139.13 186.90 80.43 48.69 5.13 34.74 9.10

6.70 5.64 16.21 9.02 28.00 12.98 24.63 27.71 159.40 214.12 92.15 55.78 5.88 39.80 10.43

1.00 1.00 1.00 1.00 2.00 2.00 1.50 1.50 3.00 4.00 2.00 1.50 1.00 2.00 2.00

42.41 42.41 42.41 42.41 84.81 84.81 63.61 63.61 127.22 169.62 84.81 63.61 42.41 84.81 84.81

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

49.11 48.04 58.62 51.42 112.81 97.79 88.24 91.32 286.61 383.75 176.96 119.39 48.28 124.61 95.24

11.75

13.46

0.25

10.60

nr

24.06

230.98 182.72 799.95 922.17 732.72 940.50 60.50 664.90 241.40 368.50 1297.73 1524.60 1751.48 165.73 195.00 241.39 332.15

264.63 209.34 916.47 1056.50 839.45 1077.50 69.31 761.75 276.56 422.18 1486.76 3233.44 6019.82 189.87 223.40 276.55 380.53

3.00 5.00 5.00 5.00 4.00 4.00 3.00 4.00 1.00 2.00 3.00 3.00 1.00 2.00 2.00 2.00 2.00

127.22 212.03 212.03 212.03 169.62 169.62 127.22 169.62 42.41 84.81 127.22 127.22 42.41 84.81 84.81 84.81 84.81

nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr nr

391.84 421.37 1128.50 1268.53 1009.08 1247.12 196.53 931.38 318.97 506.99 1613.98 3360.66 6062.23 274.68 308.22 361.36 465.34

600

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W50: FIRE DETECTION AND ALARM STANDARD FIRE DETECTION CONTROL PANEL Zone control panel; 2 x 12 volt batteries/charge up to 48 hours standby; mild steel case; flush or surface mounting 1 zone 2 zone 4 zone 8 zone 12 zone 16 zone 24 zone

161.37 217.22 255.75 379.43 457.27 771.02 1037.59

184.88 248.86 293.00 434.70 523.88 883.33 1188.73

3.00 3.51 4.00 5.00 6.00 6.00 6.00

86.65 101.34 115.53 144.41 173.29 173.29 173.29

nr nr nr nr nr nr nr

271.52 350.20 408.53 579.11 697.17 1056.62 1362.02

283.31

324.58

4.00

115.53

nr

440.11

Manual call point units: plastic covered Surface mounted Call point Call point; Weatherproof

9.17 84.77

10.51 97.12

0.50 0.80

14.44 23.11

nr nr

24.95 120.22

Flush mounted Call point Call point; Weatherproof

9.17 84.77

10.51 97.12

0.56 0.86

16.18 24.86

nr nr

26.69 121.97

31.77 31.77

36.40 36.40

0.75 0.75

21.67 21.67

nr nr

58.07 58.07

25.57

29.29

0.75

21.67

nr

50.96

23.96

27.45

0.75

21.67

nr

49.12

203.12

232.71

2.00

57.76

nr

290.47

8.18

9.37

0.50

14.44

nr

23.81

17.69 62.84 59.26

20.27 71.99 67.89

0.75 0.75 1.25 1.50

21.67 21.66 36.10 43.37

nr nr nr nr

41.93 21.66 108.10 111.26

1250.84

1433.04

6.00

173.29

nr

1606.34

Repeater panels 8 zone EQUIPMENT

Detectors Smoke, ionisation type with mounting base Smoke, optical type with mounting base Fixed temperature heat detector with mounting base (60°C) Rate of Rise heat detector with mounting base (90°C) Duct detector including optical smoke detector and base Remote smoke detector LED indicator with base Sounders 6" bell, conduit box 6" bell, conduit box; weatherproof Siren; 230V Magnetic Door Holder; 230V ; surface fixed ADDRESSABLE FIRE DETECTION CONTROL PANEL Analogue addressable panel; BS EN54 Part 2 and 4 1998; incorporating 120 addresses per loop (maximum 1-2km length); sounders wired on loop; sealed lead acid integral battery standby providing 48 hour standby; 24 volt DC; mild steel case; surface fixed 1 loop; 4 x 12 volt batteries

Material Costs/Prices for Measured Works – Electrical Installations

601

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Extra for 1 loop panel Loop card Repeater panel Network nodes

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

296.82 868.39 1486.00

340.06 994.88 1702.46

1.00 6.00 6.00

28.88 173.29 173.29

nr nr nr

368.94 1168.18 1875.75

Interface unit; for other systems Mains powered Loop powered Single channel I/O Zone module 4 loop; 4 x 12 volt batteries; 24 hour standby; 30 minute alarm

445.00 195.34 101.50 126.25

509.82 223.79 116.28 144.64

1.50 1.00 1.00 1.50

43.32 28.88 28.88 43.32

nr nr nr nr

553.14 252.68 145.17 187.96

2097.00

2402.46

8.00

231.06

nr

2633.51

Extra for 4 loop panel Loop card Repeater panel Mimic panel Network nodes

439.73 1245.20 3057.12 1484.84

503.78 1426.58 3502.43 1701.13

1.00 6.00 5.00 6.00

28.88 173.29 144.41 173.29

nr nr nr nr

532.66 1599.87 3646.84 1874.42

Interface unit; for other systems Mains powered Loop powered Single channel I/O Zone module Line modules 8 loop; 4 x 12 volt batteries; 24 hour standby; 30 minute alarm

445.00 195.34 101.50 126.25 23.28

509.82 223.79 116.28 144.64 26.67

1.50 1.00 1.00 1.50 1.00

43.32 28.88 28.88 43.32 28.88

nr nr nr nr nr

553.14 252.68 145.17 187.96 55.55

4274.84

4897.53

12.00

346.59

nr

5244.12

Extra for 8 loop panel Loop card Repeater panel Mimic panel Network nodes

439.73 1245.20 3057.12 1484.84

503.78 1426.58 3502.43 1701.13

1.00 6.00 5.00 6.00

28.88 173.29 144.41 173.29

nr nr nr nr

532.66 1599.87 3646.84 1874.42

445.00 195.36 42.60 126.25 23.28

509.82 223.82 48.81 144.64 26.67

1.50 1.00 1.00 1.50 1.00

43.32 28.88 28.88 43.32 28.88

nr nr nr nr nr

553.14 252.70 77.69 187.96 55.55

Manual Call Point Surface mounted Call point Call point; Weather proof

58.63 214.84

67.17 246.13

1.00 1.25

28.88 36.10

nr nr

96.05 282.24

Flush mounted Call point Call point; Weather proof

58.63 214.84

67.17 246.13

1.00 1.25

28.88 36.10

nr nr

96.05 282.24

59.71 59.10

68.41 67.71

0.75 0.75

21.67 21.67

nr nr

90.08 89.38

59.41

68.06

0.75

21.67

nr

89.73

59.41

68.06

0.75

21.67

nr

89.73

Interface unit; for other systems Mains powered Loop powered Single channel I/O Zone module Line modules EQUIPMENT

Detectors Smoke, ionisation type with mounting base Smoke, optical type with mounting base Fixed temperature heat detector with mounting base (60°C) Rate of Rise heat detector with mounting base (90°C)

602

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W50: FIRE DETECTION AND ALARM – cont'd ADDRESSABLE FIRE DETECTION CONTROL PANEL – cont'd EQUIPMENT – cont'd Duct Detector including optical smoke detector and addressable base Beam smoke detector with transmitter and receiver unit Zone short circuit isolator Plant interface unit Sounders Xenon flasher, 24 volt, conduit box Xenon flasher, 24 volt, conduit box; weatherproof 6" bell, conduit box 6" bell, conduit box; weatherproof Siren; 24V polarised Siren; 240V Magnetic Door Holder; 240V ; surface fixed

378.58

433.73

2.00

57.76

nr

491.49

583.64 37.53 27.65

668.66 43.00 31.68

2.00 0.75 0.50

57.76 21.66 14.44

nr nr nr

726.42 64.66 46.12

63.04

72.22

0.50

14.44

nr

86.66

93.84 17.69 51.15 63.84 62.84 59.26

107.51 99.13 58.60 73.14 71.99 67.89

0.50 0.75 0.75 1.00 1.25 1.50

14.44 21.67 21.66 28.88 36.10 43.37

nr nr nr nr nr nr

121.95 120.80 80.26 102.02 108.10 111.26

Material Costs/Prices for Measured Works – Electrical Installations

603

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W51: EARTHING AND BONDING EARTH BAR Earth bar; polymer insulators and base mounting; including connections Non disconnect link 6 way 8 way 10 way

149.29 165.31 183.66

171.04 189.39 210.41

0.81 0.81 0.81

23.39 23.39 23.39

nr nr nr

194.43 212.78 233.81

Disconnect link 6 way 8 way 10 way

168.17 185.93 206.20

192.67 213.01 236.24

1.01 1.01 1.01

29.17 29.17 29.17

nr nr nr

221.84 242.18 265.41

45.50

52.13

1.01

29.17

nr

81.30

56.45 62.10

64.68 71.14

1.16 1.16

33.50 33.50

nr nr

98.18 104.65

Crimp lugs; including screws and connections to cable 25 mm 35 mm 50 mm 70 mm 95 mm 120 mm

0.42 0.57 0.67 1.19 1.98 1.41

0.48 0.65 0.77 1.36 2.27 1.62

0.31 0.31 0.32 0.32 0.46 1.25

8.95 8.95 9.24 9.24 13.29 36.10

nr nr nr nr nr nr

9.43 9.61 10.01 10.61 15.55 37.72

Earth clamps; connection to pipework 15mm to 32mm dia 32mm to 50mm dia 50mm to 75mm dia

1.27 1.58 1.86

1.45 1.81 2.14

0.15 0.18 0.20

4.33 5.20 5.78

nr nr nr

5.78 7.00 7.91

Soild earth bar; including connections 150 x 50 x 6 mm Extra for earthing Disconnecting link 300 x 50 x 6mm 500 x 50 x 6mm

Material Costs/Prices for Measured Works – Electrical Installations

604

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W52: LIGHTNING PROTECTION CONDUCTOR TAPE PVC sheathed copper tape 25 x 3 mm 25 x 6 mm 50 x 6 mm

14.33 26.73 55.22

17.24 32.15 66.43

0.30 0.30 0.30

8.66 8.66 8.66

m m m

25.90 40.82 75.09

8.86

10.15

0.50

14.44

m

24.59

11.87 12.10 24.21 48.41

13.60 14.56 29.12 55.46

0.30 0.30 0.40 0.50

8.66 8.66 11.55 14.44

m m m m

22.26 23.22 40.68 69.90

7.71

8.83

0.50

14.44

m

23.27

6.06 6.54 11.68 6.53

7.29 7.87 14.05 7.86

0.33 0.33 0.33 0.50

9.53 9.53 9.53 14.44

nr nr nr nr

16.82 17.40 23.58 22.30

Bare copper 20 x 3 mm 25 x 3 mm 25 x 6 mm 50 x 6 mm 8mm

2.30 2.39 3.78 4.98 6.53

2.77 2.88 4.55 5.71 7.86

0.30 0.30 0.40 0.50 0.50

8.66 8.66 11.55 14.44 14.44

nr nr nr nr nr

11.43 11.54 16.10 20.15 22.30

Tape fixings; flat; non-metalic; PVC sheathed copper 25 x 3 mm

0.64

0.77

0.30

8.66

nr

9.43

Tape fixings; flat; non-metalic; Bare copper 20 x 3 mm 25 x 3 mm 50 x 6 mm

0.64 0.64 4.98

0.77 0.77 5.71

0.30 0.30 0.30

8.66 8.66 8.66

nr nr nr

9.43 9.43 14.37

90.50

103.68

0.93

26.86

nr

130.54

Pointed air rod fixed to structure; copper 10 mm diameter 500 mm long 1000mm long

15.07 25.40

17.27 29.10

1.00 1.50

28.88 43.32

nr nr

46.15 72.42

Extra for Air terminal base Strike Pad

18.80 19.97

21.54 22.88

0.35 0.35

10.11 10.11

nr nr

31.65 32.99

PVC sheathed copper solid circular conductor 8mm Bare 20 25 25 50

copper tape x 3 mm x 3 mm x 6 mm x 6 mm

Bare copper solid circular conductor 8mm Tape fixings; flat; metalic PVC sheathed copper 25 x 3 mm 25 x 6 mm 50 x 6 mm 8mm

Puddle flanges; copper 600 mm long AIR RODS

Material Costs/Prices for Measured Works – Electrical Installations

605

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

16 mm diameter 500 mm long 1000mm long 2000mm long

23.88 43.63 79.66

27.36 49.99 91.26

0.91 1.75 2.50

26.28 50.54 72.21

nr nr nr

53.64 100.53 163.47

Extra for Multiple point Air terminal base Ridge saddle Side mounting bracket Rod to tape coupling Strike Pad

40.12 22.05 41.39 41.19 16.62 19.97

45.96 25.26 47.42 47.19 19.04 22.88

0.35 0.35 0.35 0.50 0.50 0.35

10.11 10.11 10.11 14.44 14.44 10.11

nr nr nr nr nr nr

56.07 35.37 57.53 61.63 33.48 32.99

16 mm diameter 500 mm long 1000mm long 2000mm long

23.88 43.63 79.66

27.36 49.99 91.26

0.65 0.78 1.50

18.77 22.53 43.32

nr nr nr

46.13 72.51 134.59

Extra for Multiple point Flat saddle Side bracket Rod to cable coupling

40.12 42.11 41.19 20.58

45.96 48.24 47.19 23.58

0.35 0.35 0.50 0.50

10.11 10.11 14.44 14.44

nr nr nr nr

56.07 58.35 61.63 38.02

Bond to flat surface; copper 26 mm 8 mm diameter

3.57 14.76

4.09 16.91

0.45 0.33

13.00 9.53

nr nr

17.09 26.44

Pipe bond 26 mm 8 mm diameter

6.94 36.71

7.95 42.06

0.45 0.33

13.00 9.53

nr nr

20.95 51.59

Rod to tape clamp 26 mm

6.62

7.58

0.45

13.00

nr

20.58

Square clamp; copper 25 x 3 mm 50 x 6 mm 8 mm diameter

7.53 38.50 8.04

8.63 44.11 9.21

0.33 0.50 0.33

9.53 14.44 9.53

nr nr nr

18.16 58.55 18.74

Test clamp; copper 26 x 8 mm; oblong 26 x 8 mm; plate type 26 x 8 mm; screw down

11.21 34.11 30.66

12.84 39.08 35.13

0.50 0.50 0.50

14.44 14.44 14.44

nr nr nr

27.28 53.52 49.57

Cast in earth points 2 hole 4 hole

24.92 36.97

28.55 42.36

0.75 1.00

21.66 28.88

nr nr

50.21 71.24

27.97 37.97 58.85 133.58

32.04 43.50 67.42 153.04

0.25 0.25 0.25 0.50

7.22 7.22 7.22 14.44

nr nr nr nr

39.26 50.72 74.64 167.48

AIR TERMINALS

BONDS AND CLAMPS

Extra for cast in earth points Cover plate; 25 x 3 mm Cover plate; 8 mm Rebar clamp; 8 mm Static earth receptacle

606

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W52: LIGHTNING PROTECTION – cont'd BONDS AND CLAMPS – cont'd Copper braided bonds 25 x 3 mm 200 mm hole centres 400 mm holes centres

12.93 19.82

14.81 22.71

0.33 0.40

9.53 11.55

nr nr

24.34 34.26

U bolt clamps 16 mm 20 mm 25 mm

8.55 9.68 11.87

9.80 11.09 13.60

0.33 0.33 0.33

9.53 9.53 9.53

nr nr nr

19.33 20.62 23.13

Earth inspection pit; hand to others for fixing Concrete Polypropylene

39.17 41.81

44.88 47.90

1.00 1.00

28.88 28.88

nr nr

73.76 76.78

Extra for 5 hole copper earth bar; concrete pit 5 hole earth bar; polypropylene

37.25 31.82

85.35 36.45

0.35 0.35

10.11 10.11

nr nr

95.46 46.56

249.48 419.78

285.82 480.93

0.93 0.93

26.86 26.86

nr nr

312.68 507.79

Copper tape lattice 600 x 600 x 3 mm 900 x 900 x 3 mm

99.15 177.85

113.59 203.76

0.93 0.93

26.86 26.86

nr nr

140.45 230.62

Copper tape plate 600 x 600 x 1.5 mm 600 x 600 x 3 mm 900 x 900 x 1.5 mm 900 x 900 x 3 mm

87.53 175.05 196.24 380.74

100.28 200.55 224.83 436.20

0.93 0.93 0.93 0.93

26.86 26.86 26.86 26.86

nr nr nr nr

127.14 227.41 251.69 463.06

33.26

38.10

0.93

26.86

nr

64.97

1.14 1.40 1.31 6.62 2.96

1.31 1.60 1.50 7.58 3.39

0.06 0.06 0.06 0.25 0.25

1.73 1.73 1.73 7.22 7.22

nr nr nr nr nr

3.04 3.34 3.23 14.80 10.61

63.64

72.91

0.98

28.30

nr

101.21

1.14 2.31

1.31 2.65

0.06 0.06

1.73 1.73

nr nr

3.04 4.38

EARTH PITS/MATS

Water proof electrode seal Single flange Double flange Earth electrode mat; laid in ground and connected

EARTH RODS Solid cored copper earth electrodes driven into ground and connected 15 mm diameter 1200 mm long Extra for Coupling Driving stud Spike Rod Clamp; flat tape Rod Clamp; solid conductor 20 mm diameter 1200 mm long Extra for Coupling Driving stud

Material Costs/Prices for Measured Works – Electrical Installations

607

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Spike Rod Clamp; flat tape Rod Clamp; solid conductor Stainless steel earth electrodes driven into ground and connected 16 mm diameter 1200 mm long Extra for Coupling Driving head Spike Rod Clamp; flat tape Rod Clamp; solid conductor

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

2.13 6.62 3.32

2.44 7.58 3.80

0.06 0.25 0.25

1.73 7.22 7.22

nr nr nr

4.17 14.80 11.02

47.52

54.44

0.93

26.86

nr

81.30

1.49 1.40 1.31 6.62 2.96

1.71 1.60 1.50 7.58 3.39

0.06 0.06 0.06 0.25 0.25

1.73 1.73 1.73 7.22 7.22

nr nr nr nr nr

3.44 3.34 3.23 14.80 10.61

288.29 288.29

330.28 330.28

5.00 5.00

144.41 144.41

nr nr

474.69 474.69

569.89 569.89 636.92 1106.24 2111.91

652.90 652.90 729.70 1267.38 2419.54

10.00 10.00 10.00 10.00 10.00

288.82 288.82 288.82 288.82 288.82

nr nr nr nr nr

941.72 941.72 1018.52 1556.20 2708.36

SURGE PROTECTION Single Phase; including connection to equipment 90 –150v 200 – 280v Three Phase; including connection to equipment 156 – 260v 346 – 484v 349 – 484v; remote display 346 – 484v; 60kA 346 – 484v; 120kA

608

Material Costs/Prices for Measured Works – Electrical Installations W:COMMUNICATIONS/SECURITY/CONTROL

Item

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

W60: CENTRAL CONTROL/BUILDING MANAGEMENT EQUIPMENT Switches/sensors; includes fixing in position; electrical work elsewhere Note: these are normally free issued to the mechanical contractor for fitting. The labour times applied assume the installation has been prepared for the fitting of the component Pressure devices Liquid differential pressure sensor Liquid differential pressure switch Air differential pressure transmitter Air differential pressure switch Liquid level switch Static pressure sensor High pressure switch Low pressure switch Water pressure switch Duct averaging temperature sensor Temperature devices Return air sensor (fan coils) Frost thermostat Immersion thermostat Temperature high limit Temperature sensor with averaging element Immersion temperature sensor Space temperature sensor Combined space temperature & humidity sensor Outside air temperature sensor Outside air temperature & humidity sensor Duct humidity sensor Space humidity sensor Immersion water flow sensor Rain sensor Wind speed and direction sensor

150.24 82.39 113.40 15.99 57.63 389.61 82.38 82.38 82.38 135.70

172.13 94.39 129.92 18.31 66.03 446.36 94.38 94.38 94.38 155.46

0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 1.00

14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 14.44 28.88

nr nr nr nr nr nr nr nr nr nr

186.57 108.83 144.36 32.75 80.47 460.81 108.82 108.82 108.82 184.35

6.79 28.10 58.10 54.33 135.70 59.13 5.82

7.78 32.19 66.57 62.24 155.46 67.74 6.66

1.00 0.50 0.50 0.50 0.50 0.50 1.00

28.88 14.44 14.44 14.44 14.44 14.44 28.88

nr nr nr nr nr nr nr

36.67 46.63 81.01 76.69 169.90 82.18 35.55

139.57 11.63 160.90 150.23 139.57 139.57 198.69 1020.59

159.90 13.33 184.33 172.11 159.90 159.90 227.63 1169.26

1.00 2.00 2.00 0.50 1.00 0.50 2.00 2.00

28.88 57.76 57.76 14.44 28.88 14.44 57.76 57.76

nr nr nr nr nr nr nr nr

188.78 71.09 242.10 186.56 188.78 174.34 285.40 1227.02

264.92 264.92

303.51 303.51

2.00 2.00

57.76 57.76

nr nr

361.28 361.28

5127.22

5874.08

0.50

14.44

nr

5888.52

2742.91

3142.45

0.50

14.44

nr

3156.89

Controllers; includes fixing in position; electrical work elsewhere Zone Fan coil controller VAV controller Plant Controller, 96 I/O points (exact configuration is dependent upon the number of I/O boards added) Controller, 48 I/O points (exact configuration is dependent upon the number of I/O boards added)

Material Costs/Prices for Measured Works – Electrical Installations

609

W:COMMUNICATIONS/SECURITY/CONTROL

Item

Controller, 32 I/O points (exact configuration is dependent upon the number of I/O boards added) Additional Digital Input Boards (12 DI) Additional Digital Output Boards (6 DO) Additional analogue Input Boards (8 AI) Additional analogue Output Boards (8 AO) Outstation Enclosure (fitted in riser with space allowance for controller and network device)

Net Price £

Material £

Labour hours

Labour £

Unit

Total rate £

1948.16 610.61 397.37 397.37 397.37

2231.93 699.55 455.26 455.26 455.26

0.50 0.20 0.20 0.20 0.20

14.44 5.78 5.78 5.78 5.78

nr nr nr nr nr

2246.38 705.33 461.03 461.03 461.03

275.05

315.11

5.00

144.41

nr

459.53

82.18 108.55

94.16 124.37

-

-

nr nr

94.16 124.37

611.60 674.58 852.93 1156.61 1494.54 1657.38 1992.74 2249.59 4688.16

700.69 772.85 977.17 1325.09 1712.24 1898.80 2283.01 2577.27 5371.06

2.00 2.00 2.00 2.00 2.00 2.50 2.50 2.50 3.00

57.76 57.76 57.76 57.76 57.76 72.21 72.21 72.21 86.65

nr nr nr nr nr nr nr nr nr

758.45 830.61 1034.93 1382.86 1770.01 1971.01 2355.21 2649.48 5457.70

Miscellaneous; includes fixing in position; electrical work elsewhere 1kW Thyristor 10kW Thyristor

93.04 248.12

106.59 284.26

2.00 2.00

57.76 57.76

nr nr

164.36 342.03

Front end and networking; electrical work elsewhere PC/monitor Dot matrix printer PC Software Lonmaker software Lonmaker credits Network server software Router (allows connection to a network)

3257.68 590.67 2912.49 1036.42 7.69 1460.49 820.61

3732.21 676.71 3336.73 1187.39 8.81 1673.24 940.15

2.00 2.00 -

57.76 57.76 -

nr nr nr nr nr nr nr

3789.97 734.47 3336.73 1187.39 8.81 1673.24 940.15

Damper actuator; electrical work elsewhere Damper actuator 0-10v Damper actuator with auxiliary switches Frequency inverters: not mounted within MCC; includes fixing in position; electrical work elsewhere 2.2kW 3kW 7.5kW 11kW 15kW 18.5kW 20kW 30kW 55kW

PART FOUR

Rates of Wages

Mechanical Installations, page 612 Electrical Installations, page 619

Mechanical Installations

Rates of Wages HEATING, VENTILATING, AIR CONDITIONING, PIPING AND DOMESTIC ENGINEERING INDUSTRY For full details of the wage agreement and the Heating Ventilating Air Conditioning Piping and Domestic Engineering Industry’s National Working Rule Agreement, contact: Heating and Ventilating Contractor’s Association ESCA House 34 Palace Court Bayswater London W2 4JG Telephone: 020 7313 4900 Internet: www.hvca.org.uk WAGE RATES, ALLOWANCES AND OTHER PROVISIONS Hourly rates of wages All districts of the United Kingdom

Main Grades Foreman Senior Craftsman (+2nd welding skill) Senior Craftsman Craftsman (+2nd welding skill) Craftsman Operative Adult Trainee Mate (18 and over) Mate (16-17) Modern Apprentices Junior Intermediate Senior

From 6 October 2008 p/hr 14.71 12.66 12.16 11.66 11.16 10.11 8.52 8.52 3.95

5.53 7.84 10.11

Note: Ductwork Erection Operatives are entitled to the same rates and allowances as the parallel Fitter grades shown.

Rates of Wages – Mechanical Installations

613

HEATING, VENTILATING, AIR CONDITIONING, PIPING AND DOMESTIC ENGINEERING INDUSTRY

Trainee Rates of Pay Junior Ductwork Trainees (Probationary) From 6 October 2008 p/hr 5.01 5.01 5.01 5.01

Age at entry 17 18 19 20

Junior Ductwork Erectors (Year of Training) 1 yr p/h 6.24 6.24 6.24 6.24

Age at entry 17 18 19 20

From 6 October 2 yr p/hr 7.76 7.76 7.76 7.76

2008 3 yr p/hr 8.81 8.81 8.81 8.81

From 6 October 2008 p/hr 0.50 1.00

Responsibility Allowance (Craftsmen) Second welding skill or supervisory responsibility (one unit) Second welding skill and supervisory responsibility (two units)

From 6 October 2008 p/hr 0.50 1.00 1.50

Responsibility Allowance (Senior Craftsmen) Second welding skill Supervising responsibility Second welding skill and supervisory responsibility

Daily travelling allowance – Scale 2 C: M&A:

Craftsmen including Installers Mates, Apprentices and Adult Trainees

Direct distance from centre to job in miles From 6 October 2008 Over

Not exceeding

C p/hr

15 20 30 40

20 30 40 50

2.44 6.28 9.04 11.91

M&A p/hr 2.10 5.44 7.82 10.19

Rates of Wages – Mechanical Installations

614

HEATING, VENTILATING, AIR CONDITIONING, PIPING AND DOMESTIC ENGINEERING INDUSTRY

Daily travelling allowance – Scale 1 C: M&A:

Craftsmen including Installers Mates, Apprentices and Adult Trainees

Direct distance from centre to job in miles From 6 October 2008 Over

Not exceeding

C p/hr

15 20 30 40

20 30 40 50

9.13 12.97 15.73 18.59

M&A p/hr 8.79 12.12 14.51 16.88

Weekly Holiday Credit and Welfare Contributions

Weekly Holiday Credit

£ a 70.05

£ b 65.12

£ c 62.71

Combined Weekly/Welfare Holiday Credit and Contribution

77.16

72.23

69.82

From 6 October 2008 £ £ d e 60.30 57.99

67.41

65.10

Weekly Holiday Credit

£ h 48.18

£ i 40.60

From 6 October 2008 £ £ j k 37.34 26.43

Combined Weekly/Welfare Holiday Credit and Contribution

55.29

47.71

44.45

33.54

£ f 55.61

£ g 53.18

62.72

60.29

£ l N/A

£ m 18.82

N/A

25.93

Rates of Wages – Mechanical Installations

615

HEATING, VENTILATING, AIR CONDITIONING, PIPING AND DOMESTIC ENGINEERING INDUSTRY

The grades of H&V Operatives entitled to the different rates of Weekly Holiday Credit and Welfare Contribution are as follows:

a Foreman

b Senior Craftsman (RAS & RAW)

c Senior Craftsman (RAS)

d Senior Craftsman (RAW)

e Senior Craftsman Craftsman (+2 RA)

f Craftsman (+ 1RA)

g Craftsman

h Installer Senior Modern Apprentice

i Adult Trainee Mate (over 18)

j Intermediate Modern Apprentice

k Junior Modern Apprentice

l No grade allocated to this Credit Value Category

m Mate (16-17) From 6 October 2008 Daily abnormal conditions money Per day

2.99

From 6 October 2008 Lodging allowance Per night

31.10

Explanatory Notes 1.

Working Hours The normal working week (Monday to Friday) shall be 38 hours.

2.

Overtime Time worked in excess of 38 hours during the normal working week shall be paid at time and a half until 12 hours have been worked since the actual starting time. Thereafter double time shall be paid until normal starting time the following morning. Weekend overtime shall be paid at time and a half for the first 5 hours worked on a Saturday and at double time thereafter until normal starting time on Monday morning.

Rates of Wages – Mechanical Installations

616

PLUMBING MECHANICAL ENGINEERING SERVICES INDUSTRY

The Joint Industry Board for Plumbing Mechanical Engineering Services has agreed a two year wage agreement for 2008–2009 with effect from 7 January 2008. Current rates of pay for 2009 will be effective from 5 January 2009. For full details of this wage agreement and the JIB PMES National Working Rules, contact: The Joint Industry Board for Plumbing Mechanical Engineering Services in England and Wales Brook House Brook Street St Neots Huntingdon Cambridge PE19 2HW Telephone: 01480 476925 E-mail: [email protected] WAGE RATES, ALLOWANCES AND OTHER PROVISIONS EFFECTIVE FROM 5 January 2009 Basic Rates of Hourly Pay Applicable in England and Wales Hourly rate £ Operatives Technical plumber and gas service technician Advanced plumber and gas service engineer Trained plumber and gas service fitter

14.13 12.73 10.91

Apprentices 4th year of training with NVQ level 3 4th year of training with NVQ level 2 4th year of training 3rd year of training with NVQ level 2 3rd year of training 2nd year of training 1st year of training

10.55 9.56 8.43 8.32 6.85 6.06 5.29

Adult Trainees 3rd 6 months of employment 2nd 6 months of employment 1st 6 months of employment

9.52 9.14 8.52

Rates of Wages – Mechanical Installations

617

PLUMBING MECHANICAL ENGINEERING SERVICES INDUSTRY

Major Projects Agreement Where a job is designated as being a Major Project then the following Major Project Performance Payment hourly rate supplement shall be payable: Employee Category

National Payment £ 2.20 2.20 2.20 1.76 1.32 1.21 0.88 1.76

Technical Plumber and Gas Service Technician Advanced Plumber and Gas Service Engineer Trained Plumber and Gas Service Fitter All 4th year apprentices All 3rd year apprentices 2nd year apprentice 1st year apprentice All adult trainees

London* Payment £ 3.57 3.57 3.57 2.86 2.68 1.96 1.43 2.86

* The London Payment Supplement applies only to designated Major Projects that are within the M25 London orbital motorway and are effective from 1 February 2007. * National payment hourly rates are unchanged for 2007 and will continue to be at the rates shown in Promulgation 138A issued 14 October 2003. Allowances Daily travel time allowance plus return fares All daily travel allowances are to be paid at the daily rate as follows :

Over

Not exceeding

All Operatives

20 30 40

30 40 50

£4.00 £9.32 £10.65

3rd & 4th Year Apprentices

1st & 2nd Year Apprentices

£2.58 £5.99 £6.36

£1.60 £3.84 £4.00

Responsibility/Incentive Pay Allowance As from Monday 3 September 2003, Employers may, in consultation with the employees concerned, enhance the basic graded rates of pay by the payment of an additional amount, as per the bands shown below, where it is agreed that their work involves extra responsibility, productivity or flexibility. Band Band Band Band

1 2 3 4

– – – –

an an an an

additional additional additional additional

rate rate rate rate

of of of of

£ £ £ £

0.24 0.44 0.64 0.84

per per per per

hour hour hour hour

This allowance forms part of an operative’s basic rate of pay and shall be used to calculate premium payments. Mileage allowance

£0.40 per mile

Lodging allowance

£28.35 per night

Subsistence Allowance (London Only)

£4.59 per night

Rates of Wages – Mechanical Installations

618

PLUMBING MECHANICAL ENGINEERING SERVICES INDUSTRY

Plumbers welding supplement Possession of Gas or Arc Certificate Possession of Gas and Arc Certificate

£0.27 per hour £0.46 per hour

Weekly Holiday Credit Contributions (35th Issue Stamps Option)

Technical Plumber and Gas Service Technician Advance Plumber and Gas Service Engineer Trained Plumber and Gas Service Fitter Adult Trainee Apprentice in last year of training Apprentice 3rd year Apprentice 2nd year Apprentice 1st year Working Principal Ancillary Employee

Public & Annual Gross Value, £ 60.30 54.20 46.40 34.80 34.80 25.10 22.10 19.30 25.10 30.60

Combined Holiday Credit*, £ 63.65 57.15 48.85 35.60 35.60 25.80 22.70 19.80 26.70 32.20

* Public and Annual gross value is the Combined Holiday credit value less JIB administration value. Explanatory Notes 1.

Working Hours The normal working week (Monday to Friday) shall be 37½ hours, with 45 hours to be worked in the same period before overtime rates become applicable.

2.

Overtime Overtime shall be paid at time and a half up to 8.00pm (Monday to Friday) and up to 1.00pm (Saturday). Overtime worked after these times shall be paid at double time.

3.

Major Projects Agreement Under the Major Projects Agreement the normal working week shall be 38 hours (Monday to Friday) with overtime rates payable for all hours worked in excess of 38 hours in accordance with 2 above. However, it should be noted that the hourly rate supplement shall be paid for each hour worked but does not attract premium time enhancement.

4.

Pension In addition to their hourly rates of pay, plumbing employees are entitled to inclusion within the Industry Pension Scheme (or one providing equivalent benefits). The current levels of industry scheme contributions are 6½% (employers) and 3¼% (employees).

5.

Weekly Holiday Credit Contributions There has been a fundamental change in the way the JIB-PMES Holiday Pay Schemes shall apply for the 36th issue, in that 60 credits will be paid over a period of 53 weeks. For full details please refer to the 36th issue of the Holiday Credit Values as published by the JIB for Plumbing Mechanical Engineering Services in England and Wales.

Electrical Installations

Rates of Wages ELECTRICAL CONTRACTING INDUSTRY

For full details of this wage agreement and the Joint Industry Board for the Electrical Contracting Industry’s National Working Rules, contact: The Joint Industry Board for the Electrical Contracting Industry Kingswood House 47/51 Sidcup Hill Sidcup Kent DA14 6HP Telephone : 020 8302 0031 Internet : www.jib.org.uk WAGES (Graded Operatives) Rates Since 7 January 2002 two different wage rates have applied to JIB Graded Operatives working on site, depending on whether the Employer transports them to site or whether they provide their own transport. The two categories are: Job Employed (Transport Provided) Payable to an Operative who is transported to and from the job by his Employer. The Operative shall also be entitled to payment for Travel Time, when travelling in his own time, as detailed in the appropriate scale. Job Employed (Own Transport) Payable to an Operative who travels by his own means to and from the job. The Operative shall be entitled to payment for Travel Allowance and also Travel Time, when travelling in his own time, as detailed in the appropriate scale.

Rates of Wages – Electrical Installations

620

ELECTRICAL CONTRACTING INDUSTRY

The JIB rates of wages are set out below: From and including 4 January 2010, the JIB hourly rates of wages shall be as set out below: (i)

National Standard Rate: Grade Technician (or equivalent specialist grade) Approved Electrician (or equivalent specialist grade) Electrician (or equivalent specialist grade) Senior Graded Electrical Trainee Electrical Improver Labourer Adult Trainee

(ii)

Transport Provided £ 15.38 £ 13.59 £ 12.45 £ 11.20 £ 11.20 £ 9.89 £ 9.89

Own Transport £ 16.16 £ 14.35 £ 13.23 £ 11.92 £ 11.92 £ 10.62 £ 10.62

Transport Provided £ 17.23 £ 15.22 £ 13.94 £ 12.54 £ 12.54 £ 11.08 £ 11.08

Own Transport £ 18.10 £ 16.07 £ 14.83 £ 13.35 £ 13.35 £ 11.89 £ 11.89

London Rate: Grade Technician (or equivalent specialist grade) Approved Electrician (or equivalent specialist grade) Electrician (or equivalent specialist grade) Senior Graded Electrical Trainee Electrical Improver Labourer Adult Trainee

1999 Joint Industry Board Apprentice Training Scheme From and including 4 January 2010, the JIB hourly rates for Job Employed apprentices shall be: (i)

National Standard Rates

Stage Stage Stage Stage

1 2 3 4

(ii)

London Rate

Stage Stage Stage Stage

1 2 3 4

Transport Provided £ 4.35 £ 6.41 £ 9.28 £ 9.82

Own Transport £ 5.09 £ 7.16 £ 10.05 £ 10.59

Transport Provided £ 4.87 £ 7.18 £ 10.39 £ 11.00

Own Transport £ 5.70 £ 8.02 £ 11.26 £ 11.86

Rates of Wages – Electrical Installations

621

ELECTRICAL CONTRACTING INDUSTRY

Travelling Time and Travel Allowances From and including 4 January 2010 Operatives required to start/finish at the normal starting and finishing time on jobs which are 15 miles and over from the shop – in a straight line – receive payment for Travelling Time and where transport is not provided by the Employer, Travel Allowance, as follows: Distance (a)

National Standard Rate Up to 15 miles Over 15 & up to 20 miles Over 20 & up to 25 miles Over 25 & up to 35 miles Over 35 & up to 55 miles Over 55 & up to 75 miles

each each each each each

way way way way way

Total Daily Travel Allowance

Total Daily Travelling Time

Nil £ 3.43 £ 4.56 £ 6.01 £ 9.57 £ 11.71

Nil £ 4.68 £ 5.93 £ 7.25 £ 9.57 £ 11.71

For each additional 10 mile band over 75 miles, additional payment of £2.06 for Daily Travel Allowance and £2.06 for Daily Travel Time will be made. Note: Special arrangements may apply for work in the Merseyside area. Distance (b)

London Rate Up to 15 miles Over 15 & up to Over 20 & up to Over 25 & up to Over 35 & up to Over 55 & up to

20 25 35 55 75

miles miles miles miles miles

each each each each each

way way way way way

Total Daily Travel Allowance

Total Daily Travelling Time

Nil £ 3.45 £ 4.59 £ 6.05 £ 9.65 £ 11.79

Nil £ 5.03 £ 6.57 £ 7.91 £ 10.68 £ 12.50

For each additional 10 mile band over 75 miles, additional payments of £2.08 for Daily Travel Allowance and £2.08 for Daily Travel Time will be made. Travelling time and travel allowance – Section 8 (Employed permanently at the shop) Operatives required to start/finish at the normal starting and finishing time on jobs which are 15 miles and over from the shop – in a straight line – receive payment for Travelling Time and where transport is not provided by the Employer, Travel Allowance, as follows: From and including 4 January 2010 Distance (a)

National Standard Rate Up to 15 miles Over 15 & up to 20 miles Over 20 & up to 25 miles Over 25 & up to 35 miles Over 35 & up to 55 miles Over 55 & up to 75 miles

each each each each each

Total Daily Travel Allowance

way way way way way

Nil £ 3.43 £ 4.56 £ 6.01 £ 9.57 £ 11.71

Total Daily Travelling Time

£ £ £ £ £

Nil 2.75 4.13 5.51 6.89 8.27

Rates of Wages – Electrical Installations

622

ELECTRICAL CONTRACTING INDUSTRY

For each additional 10 mile band over 75 miles, additional payments of £2.06 for Daily Travel Allowance and £1.39 for Daily Travelling Time will be made. Note: Special arrangements may apply for work in the Merseyside area.

Distance (b)

London Rate Up to 15 miles Over 15 & up to Over 20 & up to Over 25 & up to Over 35 & up to Over 55 & up to

20 25 35 55 75

miles miles miles miles miles

each each each each each

Total Daily Travel Allowance Nil £ 3.45 £ 4.59 £ 6.05 £ 9.65 £ 11.79

way way way way way

Total Daily Travelling Time

£ £ £ £ £

Nil 3.06 4.59 6.11 7.62 9.17

For each additional 10 mile band over 75 miles, additional payments of £2.08 for Daily Travel Allowance and £1.40 for Daily Travelling Time will be made. Lodging Allowances £29.60 from and including 7 January 2008 Lodgings weekend retention fee, maximum reimbursement £29.60 from and including 7 January 2008 Annual Holiday Lodging Allowance Retention Maximum £10.00 per night (£ 70.00 per week) from and including 7 January 2008 Responsibility money From and including 30 March 1998 the minimum payment increased to 10p per hour and the maximum to £1.00 per hour (no change) From and including 4 January 1992 responsibility payments are enhanced by overtime and shift premiums where appropriate (no change) Combined JIB Benefits Stamp Value (from week commencing 29 September 2008) JIB Grade

Technician Approved Electrician Electrician Senior Graded Electrical Trainee and Electrical Improver Labourer & Adult Trainee

Weekly JIB combined credit value £ £ 59.69 £ 54.21 £ 50.83 £ 47.06 £ 43.09

Holiday value £ £46.49 £41.01 £37.63 £33.86 £29.89

Rates of Wages – Electrical Installations

623

ELECTRICAL CONTRACTING INDUSTRY

Explanatory Notes 1.

Working Hours The normal working week (Monday to Friday) shall be 37½ hours, with 38 hours to be worked in the same period before overtime rates become applicable.

2.

Overtime Overtime shall be paid at time and a half for all weekday overtime. Saturday overtime shall be paid at time and a half for the first 6 hours, or up to 3.00pm (whichever comes first). Thereafter double time shall be paid until normal starting time on Monday.

PART FIVE

Daywork Heating and Ventilating Industry, page 626 Electrical Industry, page 630 Building Industry Plant Hire Costs, page 633

When work is carried out in connection with a contract that cannot be valued in any other way, it is usual to assess the value on a cost basis with suitable allowances to cover overheads and profit. The basis of costing is a matter for agreement between the parties concerned but definitions of prime cost for the Heating and Ventilating and Electrical Industries have been published jointly by the Royal Institution of Chartered Surveyors and the appropriate bodies of the industries concerned, for those who wish to use them. These, together with a schedule of basic plant hire charges are reproduced on the following pages, with the kind permission of the Royal Institution of Chartered Surveyors, who own the copyright.

626

Daywork HEATING AND VENTILATING INDUSTRY

DEFINITION OF PRIME COST OF DAYWORK CARRIED OUT UNDER A HEATING, VENTILATING, AIR CONDITIONING, REFRIGERATION, PIPEWORK AND/OR DOMESTIC ENGINEERING CONTRACT (JULY 1980 EDITION) This Definition of Prime Cost is published by the Royal Institution of Chartered Surveyors and the Heating and Ventilating Contractors Association for convenience, and for use by people who choose to use it. Members of the Heating and Ventilating Contractors Association are not in any way debarred from defining Prime Cost and rendering accounts for work carried out on that basis in any way they choose. Building owners are advised to reach agreement with contractors on the Definition of Prime Cost to be used prior to entering into a contract or subcontract. SECTION 1: APPLICATION 1.1 1.2 1.3

This Definition provides a basis for the valuation of daywork executed under such heating, ventilating, air conditioning, refrigeration, pipework and or domestic engineering contracts as provide for its use. It is not applicable in any other circumstances, such as jobbing or other work carried out as a separate or main contract nor in the case of daywork executed after a date of practical completion. The terms 'contract' and 'contractor' herein shall be read as 'subcontract' and 'subcontractor' as applicable.

SECTION 2: COMPOSITION OF TOTAL CHARGES 2.1

2.2

The Prime Cost of daywork comprises the sum of the following costs: (a) Labour as defined in Section 3. (b) Materials and goods as defined in Section 4. (c) Plant as defined in Section 5. Incidental costs, overheads and profit as defined in Section 6, as provided in the contract and expressed therein as percentage adjustments, are applicable to each of 2.1 (a)–(c).

SECTION 3: LABOUR 3.1

3.2

3.3

3.4

The standard wage rates, emoluments and expenses referred to below and the standard working hours referred to in 3.2 are those laid down for the time being in the rules or decisions or agreements of the Joint Conciliation Committee of the Heating, Ventilating and Domestic Engineering Industry applicable to the works (or those of such other body as may be appropriate) and to the grade of operative concerned at the time when and the area where the daywork is executed. Hourly base rates for labour are computed by dividing the annual prime cost of labour, based upon the standard working hours and as defined in 3.4, by the number of standard working hours per annum. See example. The hourly rates computed in accordance with 3.2 shall be applied in respect of the time spent by operatives directly engaged on daywork, including those operating mechanical plant and transport and erecting and dismantling other plant (unless otherwise expressly provided in the contract) and handling and distributing the materials and goods used in the daywork. The annual prime cost of labour comprises the following: (a) Standard weekly earnings (i.e. the standard working week as determined at the appropriate rate for the operative concerned). (b) Any supplemental payments. (c) Any guaranteed minimum payments (unless included in Section 6.1(a)–(p)). (d) Merit money. (e) Differentials or extra payments in respect of skill, responsibility, discomfort, inconvenience or risk (excluding those in respect of supervisory responsibility – see 3.5) (f) Payments in respect of public holidays.

Daywork

627

HEATING AND VENTILATING INDUSTRY

(g)

3.5

Any amounts which may become payable by the contractor to or in respect of operatives arising from the rules etc. referred to in 3.1 which are not provided for in 3.4 (a)–(f) nor in Section 6.1 (a)–(p). (h) Employers contributions to the WELPLAN, the HVACR Welfare and Holiday Scheme or payments in lieu thereof. (i) Employers National Insurance contributions as applicable to 3.4 (a)–(h). (j) Any contribution, levy or tax imposed by Statute, payable by the contractor in his capacity as an employer. Differentials or extra payments in respect of supervisory responsibility are excluded from the annual prime cost (see Section 6). The time of principals, staff, foremen, chargehands and the like when working manually is admissible under this Section at the rates for the appropriate grades.

SECTION 4: MATERIALS AND GOODS 4.1 4.2 4.3 4.4

The prime cost of materials and goods obtained specifically for the daywork is the invoice cost after deducting all trade discounts and any portion of cash discounts in excess of 5%. The prime cost of all other materials and goods used in the daywork is based upon the current market prices plus any appropriate handling charges. The prime cost referred to in 4.1 and 4.2 includes the cost of delivery to site. Any Value Added Tax which is treated, or is capable of being treated, as input tax (as defined by the Finance Act 1972, or any reenactment or amendment thereof or substitution therefore) by the contractor is excluded.

SECTION 5: PLANT 5.1

5.2

Unless otherwise stated in the contract, the prime cost of plant comprises the cost of the following: (a) use or hire of mechanicallyoperated plant and transport for the time employed on and/or provided or retained for the daywork; (b) use of nonmechanical plant (excluding nonmechanical hand tools) for the time employed on and/or provided or retained for the daywork; (c) transport to and from the site and erection and dismantling where applicable. The use of nonmechanical hand tools and of erected scaffolding, staging, trestles or the like is excluded (see Section 6), unless specifically retained for the daywork.

SECTION 6: INCIDENTAL COSTS, OVERHEADS AND PROFIT 6.1

The percentage adjustments provided in the contract which are applicable to each of the totals of Sections 3, 4 and 5 comprise the following: (a) Head office charges. (b) Site staff including site supervision. (c) The additional cost of overtime (other than that referred to in 6.2). (d) Time lost due to inclement weather. (e) The additional cost of bonuses and all other incentive payments in excess of any included in 3.4. (f) Apprentices' study time. (g) Fares and travelling allowances. (h) Country, lodging and periodic allowances. (i) Sick pay or insurances in respect thereof, other than as included in 3.4. (j) Third party and employers' liability insurance. (k) Liability in respect of redundancy payments to employees. (l) Employer's National Insurance contributions not included in 3.4. (m) Use and maintenance of nonmechanical hand tools. (n) Use of erected scaffolding, staging, trestles or the like (but see 5.2). (o) Use of tarpaulins, protective clothing, artificial lighting, safety and welfare facilities, storage and the like that may be available on site.

628

Daywork HEATING AND VENTILATING INDUSTRY

(p)

6.2

Any variation to basic rates required by the contractor in cases where the contract provides for the use of a specified schedule of basic plant charges (to the extent that no other provision is made for such variation – see 5.1). (q) In the case of a subcontract which provides that the subcontractor shall allow a cash discount, such provision as is necessary for the allowance of the prescribed rate of discount. (r) All other liabilities and obligations whatsoever not specifically referred to in this Section nor chargeable under any other Section. (s) Profit. The additional cost of overtime where specifically ordered by the Architect/Supervising Officer shall only be chargeable in the terms of a prior written agreement between the parties.

Daywork

629

HEATING AND VENTILATING INDUSTRY

MECHANICAL INSTALLATIONS Calculation of Hourly Base Rate of Labour for Typical Main Grades applicable from 6 October 2008, refer to notes within Section Three – Rates of Wages. FOREMAN

Hourly Rate from 6 October 2008

SENIOR CRAFTSMAN (+ 2nd Welding Skill)

SENIOR CRAFTSMAN

CRAFTSMAN

INSTALLER

MATE OVER 18

14.71

12.66

12.16

11.16

10.11

8.52

Annual standard earnings excluding all holidays, 45.8 weeks x 38 hours

25,601.28

22,033.46

21,163.26

19,422.86

17,595.44

14,828.21

Employers national insurance contributions from 6 April 2008

2,631.78

2,175.10

2,063.72

1,840.95

1,607.04

1,252.83

Weekly holiday credit and welfare contributions (52 weeks) from 6 October 2008

4,012.32

3,505.32

3,385.20

3,135.08

2,875.08

2,480.92

32,068.59

27,561.01

26,461.38

24,262.65

21,954.32

18,457.96

18.43

15.84

15.20

13.94

12.61

10.61

Annual prime cost of labour Hourly base rate

Notes: (1) (2) (3) (4)

(5) (6) (7) (8)

Annual industry holiday (4.6 weeks x 38 hours) and public holidays (1.6 weeks x 38 hours) are paid through weekly holiday credit and welfare stamp scheme. Where applicable, Merit money and other variables (e.g. daily abnormal conditions money), which attract Employer’s National Insurance contribution, should be included. Contractors in Northern Ireland should add the appropriate amount of CITB Levy to the annual prime cost of labour prior to calculating the hourly base rate. Hourly rate based on 1,740.40 hours per annum and calculated as follows 52 Weeks @ 38 hrs/wk Less

=

1,976.00

Public Holiday = 8/5 = 1.6 weeks @ 38 hrs/wk

=

60.80

Annual holidays = 4.6 weeks @ 38 hrs/wk

=

174.80

Hours

=

For calculation of Holiday Credits and ENI refer to detailed labour rate evaluation. National Insurance contributions are those effective from 6 April 2008. Weekly holiday credit/welfare stamp values are those effective from 6 October 2008. Hourly rates of wages are those effective from 6 October 2008.

235.60 1,740.40

630

Daywork ELECTRICAL INDUSTRY

DEFINITION OF PRIME COST OF DAYWORK CARRIED OUT UNDER AN ELECTRICAL CONTRACT (MARCH 1981 EDITION) This Definition of Prime Cost is published by The Royal Institution of Chartered Surveyors and The Electrical Contractors' Associations for convenience and for use by people who choose to use it. Members of The Electrical Contractors' Association are not in any way debarred from defining Prime Cost and rendering accounts for work carried out on that basis in any way they choose. Building owners are advised to reach agreement with contractors on the Definition of Prime Cost to be used prior to entering into a contract or subcontract. SECTION 1: APPLICATION 1.1 1.2 1.3

This Definition provides a basis for the valuation of daywork executed under such electrical contracts as provide for its use. It is not applicable in any other circumstances, such as jobbing, or other work carried out as a separate or main contract, nor in the case of daywork executed after the date of practical completion. The terms 'contract' and 'contractor' herein shall be read as 'subcontract' and 'subcontractor' as the context may require.

SECTION 2: COMPOSITION OF TOTAL CHARGES 2.1

2.2

The Prime Cost of daywork comprises the sum of the following costs: (a) Labour as defined in Section 3. (b) Materials and goods as defined in Section 4. (c) Plant as defined in Section 5. Incidental costs, overheads and profit as defined in Section 6, as provided in the contract and expressed therein as percentage adjustments, are applicable to each of 2.1 (a)–(c).

SECTION 3: LABOUR 3.1

3.2

3.3

3.4

The standard wage rates, emoluments and expenses referred to below and the standard working hours referred to in 3.2 are those laid down for the time being in the rules and determinations or decisions of the Joint Industry Board or the Scottish Joint Industry Board for the Electrical Contracting Industry (or those of such other body as may be appropriate) applicable to the works and relating to the grade of operative concerned at the time when and in the area where daywork is executed. Hourly base rates for labour are computed by dividing the annual prime cost of labour, based upon the standard working hours and as defined in 3.4 by the number of standard working hours per annum. See examples. The hourly rates computed in accordance with 3.2 shall be applied in respect of the time spent by operatives directly engaged on daywork, including those operating mechanical plant and transport and erecting and dismantling other plant (unless otherwise expressly provided in the contract) and handling and distributing the materials and goods used in the daywork. The annual prime cost of labour comprises the following: (a) Standard weekly earnings (i.e. the standard working week as determined at the appropriate rate for the operative concerned). (b) Payments in respect of public holidays. (c) Any amounts which may become payable by the Contractor to or in respect of operatives arising from operation of the rules etc. referred to in 3.1 which are not provided for in 3.4(a) and (b) nor in Section 6. (d) Employer's National Insurance Contributions as applicable to 3.4 (a)–(c). (e) Employer's contributions to the Joint Industry Board Combined Benefits Scheme or Scottish Joint Industry Board Holiday and Welfare Stamp Scheme, and holiday payments made to apprentices in compliance with the Joint Industry Board National Working Rules and Industrial Determinations as an employer. (f) Any contribution, levy or tax imposed by Statute, payable by the Contractor in his capacity as an employer.

Daywork

631

ELECTRICAL INDUSTRY

3.5

Differentials or extra payments in respect of supervisory responsibility are excluded from the annual prime cost (see Section 6). The time of principals and similar categories, when working manually, is admissible under this Section at the rates for the appropriate grades.

SECTION 4: MATERIALS AND GOODS 4.1 4.2 4.3 4.4

The prime cost of materials and goods obtained specifically for the daywork is the invoice cost after deducting all trade discounts and any portion of cash discounts in excess of 5%. The prime cost of all other materials and goods used in the daywork is based upon the current market prices plus any appropriate handling charges. The prime cost referred to in 4.1 and 4.2 includes the cost of delivery to site. Any Value Added Tax which is treated, or is capable of being treated, as input tax (as defined by the Finance Act 1972, or any reenactment or amendment thereof or substitution therefore) by the Contractor is excluded.

SECTION 5: PLANT 5.1

5.2 5.3

Unless otherwise stated in the contract, the prime cost of plant comprises the cost of the following: (a) Use or hire of mechanicallyoperated plant and transport for the time employed on and/or provided or retained for the daywork; (b) Use of nonmechanical plant (excluding nonmechanical hand tools) for the time employed on and/or provided or retained for the daywork; (c) Transport to and from the site and erection and dismantling where applicable. The use of nonmechanical hand tools and of erected scaffolding, staging, trestles or the likes is excluded (see Section 6), unless specifically retained for daywork. Note: Where hired or other plant is operated by the Electrical Contractor's operatives, such time is to be included under Section 3 unless otherwise provided in the contract.

SECTION 6: INCIDENTAL COSTS, OVERHEADS AND PROFIT 6.1

The percentage adjustments provided in the contract which are applicable to each of the totals of Sections 3, 4 and 5, compromise the following: (a) Head Office charges. (b) Site staff including site supervision. (c) The additional cost of overtime (other than that referred to in 6.2). (d) Time lost due to inclement weather. (e) The additional cost of bonuses and other incentive payments. (f) Apprentices' study time. (g) Travelling time and fares. (h) Country and lodging allowances. (i) Sick pay or insurance in lieu thereof, in respect of apprentices. (j) Third party and employers' liability insurance. (k) Liability in respect of redundancy payments to employees. (l) Employers' National Insurance Contributions not included in 3.4. (m) Use and maintenance of nonmechanical hand tools. (n) Use of erected scaffolding, staging, trestles or the like (but see 5.2.). (o) Use of tarpaulins, protective clothing, artificial lighting, safety and welfare facilities, storage and the like that may be available on site. (p) Any variation to basic rates required by the Contractor in cases where the contract provides for the use of a specified schedule of basic plant charges (to the extent that no other provision is made for such variation – see 5.1). (q) All other liabilities and obligations whatsoever not specifically referred to in this Section nor chargeable under any other Section. (r) Profit. (s) In the case of a subcontract which provides that the subcontractor shall allow a cash discount, such provision as is necessary for the allowance of the prescribed rate of discount.

632

Daywork ELECTRICAL INDUSTRY

6.2

The additional cost of overtime where specifically ordered by the Architect/Supervising Officer shall only be chargeable in the terms of a prior written agreement between the parties.

ELECTRICAL INSTALLATIONS Calculation of Hourly Base Rate of Labour for Typical Main Grades applicable from 7 January 2008 TECHNICIAN Hourly Rate from 4 January 2010 (London Rates)

APPROVED ELECTRICIAN

ELECTRICIAN

LABOURER

18.10

16.07

14.83

11.89

31,222.50

27,720.75

25,581.75

20,510.25

Employers national insurance contributions from 6 April 2008

3,351.30

2,903.07

2,629.28

1,980.13

JIB Combined benefits from 29 September 2008

3,103.88

2,818.92

2,643.16

2,240.68

Annual standard earnings excluding all holidays, 46 weeks x 37.5 hours

Holiday top up funding Annual prime cost of labour Hourly base rate

968.62

796.83

683.59

434.57

38,646.30

34,239.57

31,547.78

25,165.63

22.40

19.85

18.29

14.59

Notes: (1) (2) (3) (4) (5)

(6) (7) (8) (9)

Annual industry holiday (4.4 weeks x 37.5 hours) and public holidays (1.6 weeks x 37.5 hours). It should be noted that all labour costs incurred by the Contractor in his capacity as an Employer, other than those contained in the hourly rate above, must be taken into account under Section 6. Public Holidays are paid through weekly holiday credit and welfare stamp scheme. Contractors in Northern Ireland should add the appropriate amount of CITB Levy to the annual prime cost of labour prior to calculating the hourly base rate. Hourly rate based on 1,725 hours per annum and calculated as follows: 52 Weeks @ 37.5 hrs/wk Less

=

1,950.00

Public Holiday = 8/5 = 1.6 weeks @ 37.5 hrs/wk

=

60.00

Annual holidays = 4.4 weeks @ 37.5 hrs/wk

=

165.00

Hours

=

For calculation of holiday credits and ENI refer to detailed labour rate evaluation. Hourly wage rates are those effective from 4 January 2010. National Insurance contributions are those effective from 6 April 2008. JIB Combined Benefits Values are those effective from 28 September 2008.

225.00 1,725.00

Daywork

633

BUILDING INDUSTRY PLANT HIRE COSTS

SCHEDULE OF BASIC PLANT CHARGES (MAY 2001) This Schedule is published by the Royal Institution of Chartered Surveyors and is for use in connection with Dayworks under a Building Contract. EXPLANATORY NOTES 1

The rates in the Schedule are intended to apply solely to daywork carried out under and incidental to a Building Contract. They are NOT intended to apply to: (i) jobbing or any other work carried out as a main or separate contract; or (ii) work carried out after the date of commencement of the Defects Liability Period.

2

The rates apply to plant and machinery already on site, whether hired or owned by the Contractor.

3

The rates, unless otherwise stated, include the cost of fuel and power of every description, lubricating oils, grease, maintenance, sharpening of tools, replacement of spare parts, all consumable stores and for licences and insurances applicable to items of plant.

4

The rates, unless otherwise stated, do not include the costs of drivers and attendants (unless otherwise stated).

5

The rates in the Schedule are base costs and may be subject to an overall adjustment for price movement, overheads and profit, quoted by the Contractor prior to the placing of the Contract.

6

The rates should be applied to the time during which the plant is actually engaged in daywork.

7

Whether or not plant is chargeable on daywork depends on the daywork agreement in use and the inclusion of an item of plant in this schedule does not necessarily indicate that item is chargeable.

8

Rates for plant not included in the Schedule or which is not already on site and is specifically provided or hired for daywork shall be settled at prices which are reasonably related to the rates in the Schedule having regard to any overall adjustment quoted by the Contractor in the Conditions of Contract.

Note: All rates in the schedule were calculated during the first quarter of 2001.

634

Daywork BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant

Size/Rating

Unit

Rate/hr

PUMPS Mobile Pumps Including pump hoses, valves and strainers etc. Diaphragm Diaphragm Submersible Induced flow Induced flow Centrifugal, self priming Centrifugal, self priming Centrifugal, self priming

50mm dia. 76mm dia. 50mm dia. 50mm dia. 76mm dia. 50mm dia. 102mm dia. 152mm dia.

Each Each Each Each Each Each Each Each

0.87 1.29 1.18 1.54 2.05 1.96 2.52 3.87

Each Each Each Each Each Each Each

2.00 2.80 2.15 5.10 1.79 2.05 3.59

Any height 1.8m high 2.4m high

Pair Pair Pair

0.10 0.21 0.26

Sizes up to 4.9m (open) Sizes up to 1.67m (open)

Each Each Each Metre Each

0.10 0.15 0.10 0.01 1.00

3.5m x 2.0m 3.5m x 2.0m

Each Each

0.08 0.08

6 tonnes 7 tonnes 8 tonnes 10 tonnes 12 tonnes 15 tonnes 18 tonnes 20 tonnes 25 tonnes

Each Each Each Each Each Each Each Each Each

24.40 25.00 25.62 26.90 28.25 29.66 31.14 32.70 34.33

SCAFFOLDING, SHORING, FENCING Complete Scaffolding Mobile working towers, single width Mobile working towers, single width Mobile working towers, double width Mobile working towers, double width Chimney scaffold, single unit Chimney scaffold, twin unit Chimney scaffold, four unit Trestles Trestle, adjustable Trestle, painters Trestle, Painters Shoring, Planking and Strutting 'Acrow' adjustable prop 'Strong boy' support attachment Adjustable trench struts Trench sheet Backhoe trench box Temporary Fencing Including block and coupler Site fencing steel grid panel Anti-climb site steel grid fence panel LIFTING APPLIANCES AND CONVEYORS Cranes Mobile Cranes Rates are inclusive of drivers Lorry mounted, telescopic jib Two wheel drive Two wheel drive Two wheel drive Two wheel drive Two wheel drive Two wheel drive Two wheel drive Two wheel drive Two wheel drive

1.8m 1.8m 1.8m 1.8m

x x x x

0.8m 0.8m 1.4m 1.4m

base base base base

x x x x

7m high 9m high 7m high 15m high

Daywork

635

BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant

Size/Rating

Unit

Rate/hr

Four wheel drive Four wheel drive Four wheel drive Four wheel drive Four wheel drive Four wheel drive Four wheel drive Four wheel drive Track-mounted tower crane Rates inclusive of driver Note : Capacity equals maximum lift in tonnes times maximum radius at which it can be lifted

10 12 15 20 25 30 45 50

Each Each Each Each Each Each Each Each

27.44 28.81 30.25 33.35 35.19 37.12 39.16 41.32

Each Each Each Each Each Each Each Each Each Each Each Each Each

7.99 8.59 9.18 11.56 13.78 18.09 22.20 24.32 23.00 25.91 26.45 29.38 32.35

tonnes tonnes tonnes tonnes tonnes tonnes tonnes tonnes

Capacity (metre/tonnes)

Tower crane Tower crane Tower crane Tower crane Tower crane Tower crane Tower crane Tower crane Tower crane Tower crane Tower crane Tower crane Tower crane Static tower cranes Rates inclusive of driver To be charged at 90% of the above rates for track mounted tower cranes

up to

Height under hook above ground (m) up to

10 15 20 25 30 40 50 60 70 80 110 125 150

17 18 20 22 22 22 22 22 22 22 22 30 30

Crane Equipment Muck tipping skip Muck tipping skip Muck tipping skip Muck tipping skip Muck tipping skip Muck tipping skip

Up to 0.25m³ 0.5m³ 0.75m³ 1.0m³ 1.5m³ 2.0m³

Each Each Each Each Each Each

0.56 0.67 0.82 1.03 1.18 1.38

Mortar skips Boat skips Boat skips Boat skips Concrete skips, Concrete skips, Concrete skips, Concrete skips, Concrete skips,

up to 0.38m³ 1.0m³ 1.5m³ 2.0m³ 0.5m³ 0.75m³ 1.0m³ 1.5m³ 2.0m³

Each Each Each Each Each Each Each Each Each

0.41 1.08 1.33 1.59 1.00 1.10 1.25 1.50 1.65

hand hand hand hand hand

levered levered levered levered levered

636

Daywork BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant

Size/Rating

Unit

Rate/hr

0.5m³ 0.75m³ 1.0m³ 1.5m³ 2.0m³

Each Each Each Each Each

1.30 1.40 1.55 1.80 2.05

200kg 500kg 1100kg 15 person, 1200kg

Each Each Each Each

1.92 3.31 4.28 5.62 0.31

7.5m long x 400mm wide 3m unit

Each Each

6.41 3.59

Each Each Each Each

0.21 2.95 1.03 0.26

Each Each Each Each

4.87 5.12 6.04 7.69

7.5m 13m 7.8m 7m, 2 tonne 13m, 3 tonne

Each Each Each Each Each

4.23 9.23 7.56 7.18 8.72

1 tonne 3 tonnes 1 tonne 2 tonnes 5 tonnes 1 tonne 1.6 tonnes 3.2 tonnes not exceeding not exceeding not exceeding not exceeding

Sets Sets Each Each Each Each Each Each Set Set Set Set

1.92 3.21 0.45 0.71 1.22 0.64 0.90 1.15 0.35 0.45 0.41 1.28

Crane Equipment (cont’d) Concrete Concrete Concrete Concrete Concrete

skips, skips, skips, skips, skips,

geared geared geared geared geared

Hoists Scaffold hoists Rack and pinion (goods only) Rack and pinion (goods only) Rack and pinion goods and passenger Wheelbarrow chain sling Conveyors Belt conveyors Conveyor Miniveyor, control box and loading hopper Other Conveying Equipment Wheelbarrow Hydraulic superlift Pavac slab lifter Hand pad and hose attachment Lifting Trucks Fork lift, two wheel drive Fork lift, two wheel drive Fork lift, two wheel drive Fork lift, four wheel drive Fork lift, four wheel drive Lifting Platforms Hydraulic platform (Cherry picker) Hydraulic platform (Cherry picker) Scissors lift Telescopic handlers Telescopic handlers Lifting and Jacking Gear Pipe winch including gantry Pipe winch including gantry Chain block Chain block Chain block Pull lift (Tirfor winch) Pull lift (Tirfor winch) Pull lift (Tirfor winch) Brother or chain slings, two legs Brother or chain slings, two legs Brother or chain slings, four legs Brother or chain slings, four legs

Payload 1100kg 2540kg 1524kg 2600kg

Max Lift up to 3.0m up to 3.7m up to 6.0m up to 5.4m

4.2 tonnes 7.5 tonnes 3.1 tonnes 11.2 tonnes

Daywork

637

BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant

Size/Rating

Unit

Rate/hr

7.5 tonnes 17 tonnes 24 tonnes 7.5 tonnes 17 tonnes 24 tonnes

Each Each Each Each Each Each

19.00 21.00 26.00 21.40 27.50 32.10

15/17 tonnes 24 tonnes 30 tonnes

Each Each Each

19.50 21.40 27.10

Makers capacity 0.8 tonnes 1 tonne 1.2 tonnes 2 tonnes 3 tonnes 4 tonnes 5 tonnes 6 tonnes

Each Each Each Each Each Each Each Each

1.20 1.30 1.60 2.50 3.00 3.50 4.00 4.50

10/13 18/20 22/25 35/40

Each Each Each Each

20.00 20.40 26.30 36.60

48 h.p. 65 h.p.

Each Each

4.65 5.15

80/90 h.p. 115/130 h.p. 130/150 h.p. 155/175 h.p. 210/230 h.p. 300/340 h.p. 400/440 h.p. 0.8m³ 1.0m³ 1.2m³ 1.4m³ 1.8m³

Each Each Each Each Each Each Each Each Each Each Each Each

21.40 25.10 26.00 27.74 28.00 31.10 46.90 25.00 28.00 32.00 36.00 45.00

CONSTRUCTION VEHICLES Lorries Plated lorries Rates are inclusive of driver Platform lorries Platform lorries Platform lorries Platform lorries with winch and skids Platform lorries with crane Platform lorries with crane Tipper Lorries Rates are inclusive of driver Tipper lorries Tipper lorries Tipper lorries Dumpers Site use only (excluding tax, insurance and extra Cost of DERV etc. when operating on highway) Two wheel drive Two wheel drive Two wheel drive Four wheel drive Four wheel drive Four wheel drive Four wheel drive Four wheel drive Dumper Trucks Rates are inclusive of drivers Dumper trucks Dumper trucks Dumper trucks Dumper trucks Tractors Agricultural Type Wheeled, rubber-clad tyred Light Heavy Crawler Tractors With bull or angle dozer With bull or angle dozer With bull or angle dozer With bull or angle dozer With bull or angle dozer With bull or angle dozer With bull or angle dozer With loading shovel With loading shovel With loading shovel With loading shovel With loading shovel

tonnes tonnes tonnes tonnes

638

Daywork BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant

Size/Rating

Unit

Rate/hr

Light Vans Ford Escort or the like Ford Transit or the like Luton Box Van or the like

1.0 tonnes 1.8 tonnes

Each Each Each

4.74 6.79 8.33

Water/Fuel Storage Mobile water container Water bowser Water bowser Mobile fuel container Fuel bowser Fuel bowser

110 litres 1100 litres 3000 litres 110 litres 1100 litres 3000 litres

Each Each Each Each Each Each

0.28 0.55 0.74 0.28 0.65 1.02

EXCAVATORS AND LOADERS Excavators Wheeled, hydraulic Wheeled, hydraulic Wheeled, hydraulic Wheeled, hydraulic Wheeled, hydraulic Crawler, hydraulic Crawler, hydraulic Crawler, hydraulic Crawler, hydraulic Crawler, hydraulic Mini excavators Mini excavators Mini excavators Mini excavators Mini excavators

7/10 tonnes 11/13 tonnes 15/16 tonnes 17/18 tonnes 20/23 tonnes 12/14 tonnes 15/17.5 tonnes 20/23 tonnes 25/30 tonnes 30/35 tonnes 1000/1500kg 2150/2400kg 2700/3500kg 3500/4500kg 4500/6000kg

Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each

12.00 12.70 14.80 16.70 16.70 12.00 14.00 16.00 21.00 30.00 4.50 5.50 6.50 8.50 9.50

1.6m³ 2.4m³ 3.6m³ 4.4m³ 0.8m³ 1.2m³ 1.6m³ 2m³ 300/400kg payload

Each Each Each Each Each Each Each Each Each Each

4.50 12.00 19.00 22.00 23.00 11.00 14.00 16.00 17.00 6.00

2.5/3.5 tonnes 7/8 tonnes 7/8 tonnes 12 tonnes 20 tonnes 30 tonnes 40 tonnes

Each Each Each Each Each Each Each

7.00 9.00 10.00 20.00 16.00 35.00 38.00

Loaders Wheeled skip loader Shovel loaders, four wheel drive Shovel loaders, four wheel drive Shovel loaders, four wheel drive Shovel loaders, four wheel drive Shovel loaders, crawlers Shovel loaders, crawlers Shovel loaders, crawlers Shovel loaders, crawlers Skid steer loaders wheeled Excavator Loaders Wheeled tractor type with back-hoe excavator Four wheel drive Four wheel drive, 2 wheel steer Four wheel drive, 4 wheel steer Crawler, hydraulic Crawler, hydraulic Crawler, hydraulic Crawler, hydraulic

Daywork

639

BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant

Size/Rating

Unit

Rate/hr

COMPACTION EQUIPMENT Rollers Vibrating roller Single roller Single roller

368kg–420kg 533kg 750kg

Each Each Each

1.68 1.92 2.41

368kg–420kg 533kg 750kg 698kg 851kg 1067kg 1397kg 3–4 tonnes dead weight 4–6 tonnes 6–10 tonnes

Each Each Each Each Each Each Each Each Each Each

1.68 1.92 2.41 1.93 2.41 3.03 3.17 3.18 4.13 4.84

225mm–275mm

Each

1.59

375mm–400mm 375mm–1400mm 400mm

Each Each Each

1.20 0.33 2.20

0.09/0/06m³ 0.12/0.09m³ 0.15/0.10m³ 0.20/0.15m³

Each Each Each Each

0.62 0.68 0.72 0.80

23m max. distance 50m max. distance

Each Each

36.00 46.00

up to 75mm dia. up to 75mm dia. 5m 3m–5m 725mm–900mm

Each Each Each Each Each Each Each

1.62 0.79 0.77 1.77 2.18 1.72 0.92

Sets Sets Sets

1.87 2.46 0.64

Vibrating roller Single roller Single roller Twin roller Twin roller Twin roller with seat end steering wheel Twin roller with seat end steering wheel Pavement rollers Pavement rollers Pavement rollers Rammers Tamper rammer 2 stroke-petrol Soil Compactors Plate compactor Plate compactor rubber pad Plate compactor reversible plate – petrol CONCRETE EQUIPMENT Concrete/Mortar Mixers Open drum without hopper Open drum without hopper Open drum without hopper Open drum with hopper Concrete/Mortar Transport Equipment Concrete pump including hose, valve and couplers Lorry mounted concrete pump Lorry mounted concrete pump Concrete Equipment Vibrator, poker, petrol type Air vibrator (excluding compressor and hose) Extra poker heads Vibrating screed unit with beam Vibrating screed unit with adjustable beam Power float Power grouter TESTING EQUIPMENT Pipe Testing Equipment Pressure testing pump, electric Pipe pressure testing equipment, hydraulic Pressure test pump

640

Daywork BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant SITE ACCOMMODATION AND TEMPORARY SERVICES Heating Equipment Space heaters – propane Space heaters – propane/electric Space heaters – propane/electric Space heaters, propane Space heaters, propane Cabinet heaters Cabinet heater catalytic Electric halogen heaters Ceramic heaters Fan heaters Cooling Fan Mobile cooling unit – small Mobile cooling unit – large Air conditioning unit Site Lighting and Equipment Tripod floodlight Tripod floodlight Towable floodlight Hand held floodlight Rechargeable light Inspection light Plasterers light Lighting mast Festoon light string Site Electrical Equipment Extension leads Extension leafs Cable reel Cable reel 4 way junction box Power Generating Units Generator – petrol Generator – silenced petrol Generator – petrol Generator – diesel Generator – silenced diesel Generator – silenced diesel Tail adaptor Transformers Transformer Transformer Transformer Transformer Rubbish Collection and Disposal Equipment Rubbish Chutes Standard plastic module Steel liner insert Steel top hopper Plastic side entry hopper Plastic side entry hopper liner

Size/Rating

Unit

Rate/hr

Each Each Each Each Each Each Each Each Each Each Each Each Each Each

0.77 1.56 1.79 1.33 1.64 0.41 0.46 1.28 0.79 0.41 1.15 1.38 1.54 2.62

33m

Each Each Each Each Each Each Each Each Each

0.36 0.34 2.00 0.22 0.62 0.15 0.56 0.92 0.31

240V/14m 110V/14m 25m 110V/240V 50m 110V/240V 110V

Each Each Each Each Each

0.20 0.20 0.28 0.33 0.17

2kVA 2kVA 3VA 5kVA 8kVA 1.5kVA 240V

Each Each Each Each Each Each Each

1.08 1.54 1.38 1.92 3.59 7.69 0.20

3kVA 5kVA 7.5kVA 10kVA

Each Each Each Each

0.36 0.51 0.82 0.87

1m section

Each Each Each Each Each

0.18 0.26 0.20 0.20 0.20

80,000Btu/hr 125,000Btu/hr 250,000Btu/hr 125,000Btu/hr 260,000Btu/hr

3kW 3kW

500W 1000W 4 x 1000W 500W

Daywork

641

BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant SITE EQUIPMENT Welding Equipment Arc-(Electric) Complete with Leads Welder generator – petrol Welder generator – diesel Welder generator – diesel Extra welding lead sets Gas-Oxy Welder Welding and cutting set (including oxygen and acetylene, excluding underwater equipment and thermic boring) Small Large Mig welder Fume extractor Road Works Equipment Traffic lights, mains/generator Traffic lights, mains/generator Traffic lights, mains/generator Traffic lights, mains/generator – trailer mounted Flashing lights Road safety cone Safety cone Safety barrier plank Safety barrier plank Road sign DPC Equipment Damp proofing injection machine Cleaning Equipment Vacuum cleaner (industrial wet) single motor Vacuum cleaner (industrial wet) twin motor Vacuum cleaner (industrial wet) triple motor Vacuum cleaner (industrial wet) back pack Pressure washer, light duty, electric Pressure washer, heavy duty, diesel Cold pressure washer, electric Hot pressure washer, petrol Cold pressure washer, petrol Sandblast attachment to last washer Drain cleaning attachment to last washer Surface Preparation Equipment Rotavators Scabbler, up to three heads Scabbler, pole Scabbler, multi-headed floor Floor preparation machine

Size/Rating

Unit

Rate/hr

200 amp 300/350 amp 400 amp

Each Each Each Each

2.26 3.33 4.74 0.29

Each Each Each Each

1.41 2.00 1.00 0.92

Set Set Set Set Each 10 10 Each Each Each

4.01 7.92 9.81 3.98 0.20 0.26 0.38 0.03 0.04 0.26

Each

1.49

Each Each Each Each Each Each Each Each Each Each Each

0.62 1.23 1.44 0.97 0.97 2.69 1.79 2.92 2.00 0.54 0.31

Each Each Each Each Each

1.67 1.15 1.50 4.00 2.82

2-way 3-way 4-way 2-way 450mm 750mm 1.25m 2m

1450 PSI 2500 PSI

5 h.p.

642

Daywork BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant Compressors and Equipment Portable Compressors Compressors – electric Compressors – petrol Compressors – petrol Compressors – diesel Compressors – diesel Compressors – diesel Compressors – diesel Compressors – diesel Compressors – diesel Compressors – diesel Mobile Compressors Lorry mounted compressors (machine plus lorry only) Tractor mounted compressors (machine plus rubber tyred tractor) Accessories (Pneumatic Tools) (with and including up to 15m of air hose) Demolition pick Breakers (with six steels) light Breakers (with six steels) medium Breakers (with six steels) heavy Rock drill (for use with compressor) hand held Additional hoses Muffler, tool silencer Breakers Demolition hammer drill, heavy duty, electric Road breaker, electric Road breaker, 2 stroke, petrol Hydraulic breaker unit, light duty, petrol Hydraulic breaker unit, heavy duty, petrol Hydraulic breaker unit, heavy duty, diesel Quarrying and Tooling Equipment Block and stone splitter, hydraulic Block and slab splitter, manual Steel Reinforcement Equipment Bar bending machine – manual Bar bending machine – manual Bar shearing machine – electric Bar shearing machine – electric Bar cropper machine – electric Bar cropper machine – electric Bar cropper machine – electric Bar cropper machine – 3 phase Dehumidifiers 110/240v Water 110/240v Water

Size/Rating

Unit

Rate/hr

0.23m³/min 0.28m³/min 0.71m³/min up to 2.83m³/min up to 3.68m³/min up to 4.25m³/min up to 4.81m³/min up to 7.64m³/min up to 11.32m³/min up to 18.40m³/min

Each Each Each Each Each Each Each Each Each Each

1.59 1.74 2.00 1.24 1.49 1.60 1.92 3.08 4.23 5.73

2.86–4.24m³/min

Each

12.50

2.86–3.40m³/min

Each

13.50

Each Each Each Each Each Each Each

1.03 0.79 1.08 1.44 0.90 0.16 0.14

Each Each Each Each Each Each

1.00 1.65 2.05 2.05 2.60 2.95

600mm x 600mm

Each Each

1.35 1.10

up up up up up up up up

Each Each Each Each Each Each Each Each

0.90 1.28 2.82 3.85 1.54 2.05 2.82 3.85

68 litres extraction per 24 hrs Each 90 litres extraction per 24 hrs Each

1.28 1.85

up to 150kg 295kg 386kg 15m

to to to to to to to to

13mm 20mm 38mm 40mm 13mm 20mm 40mm 40mm

dia. dia. dia. dia. dia. dia. dia. dia.

rods rods rods rods rods rods rods rods

Daywork

643

BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant

Size/Rating

Compressors and Equipment (cont’d) SMALL TOOLS Saws Masonry bench saw Floor saw Floor saw

350mm–500mm dia. Each 350mm dia., 125mm max. cut Each 450mm dia., 150mm max. cut Each

Floor saw, reversible Chop/cut off saw, electric Circular saw, electric Tyrannosaw Reciprocating saw Door trimmer Chainsaw, petrol Full chainsaw safety kit Worktop jig Pipework Equipment Pipe bender Pipe bender, hydraulic Pipe bender, electric Pipe cutter, hydraulic Tripod pipe vice Ratchet threader Pipe threading machine, electric Pipe threading machine, electric Impact wrench, electric Impact wrench, two stroke, petrol Impact wrench, heavy duty, electric Plumber's furnace, calor gas or similar Hand-held Drills and Equipment Impact or hammer drill Impact or hammer drill Angle head drills Stirrer, mixer drills Paint, Insulation Application Equipment Airless spray unit Portaspray unit HVLP turbine spray unit Compressor and spray gun Other Handtools Screwing machine Screwing machine Staple gun Air nail gun Cartridge hammer Tongue and groove nailer complete with mallet Chasing machine Chasing machine Floor grinder Floor plane Diamond concrete planer Autofeed screwdriver, electric Laminate trimmer

Max. cut 300mm 350mm dia. 230mm dia.

500mm

15mm–22mm 50mm 50mm–150mm dia.

12mm–32mm 12mm–75mm 12mm–100mm

up to 25mm dia. 35mm dia.

13mm–50mm dia. 25mm–100mm dia. 110V

152mm 76mm–203mm

Unit

Rate/hr

2.80 1.90 2.60

Each Each Each Each Each Each Each Each Each

13.00 1.33 0.60 1.20 0.60 0.90 2.13 0.50 0.60

Each Each Each Each Set Each Each Each Each Each Each Each

0.33 0.60 1.35 1.84 0.40 0.55 2.40 3.00 0.54 4.49 1.13 2.16

Each Each Each Each

0.50 0.90 0.70 0.70

Each Each Each Each

4.20 1.65 1.65 2.20

Each Each Each Each Each Each Each Each Each Each Each Each Each

0.77 1.57 0.33 3.33 1.00 0.93 1.72 5.99 3.00 3.67 2.05 1.13 0.64

644

Daywork BUILDING INDUSTRY PLANT HIRE COSTS

MECHANICAL PLANT AND TOOLS Item of Plant Biscuit jointer Random orbital sander Floor sander Palm, delta, flap or belt sander Saw cutter, 2 stroke, petrol Grinder, angle or cutter Grinder, angle or cutter Mortar raking tool attachment Floor/polisher scrubber Floor tile stripper Wallpaper stripper, electric Electric scraper Hot air paint stripper Electric diamond tile cutter Hand tile cutter Electric needle gun Needle chipping gun Pedestrian floor sweeper

Size/Rating

300mm up to 225mm 300mm 325mm

All sizes

1.2m wide

Unit

Rate/hr

Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each

0.87 0.72 1.33 0.38 1.26 0.60 1.10 0.15 1.03 1.74 0.56 0.51 0.38 1.38 0.36 1.08 0.72 0.87

Tables and Memoranda

Conversion Tables, page 646 Formulae, page 648 Fractions, Decimals and Millimetre Equivalents, page 649 Imperial Standard Wire Gauge, page 650 Water Pressure Due to Height, page 651 Table of Weights for Steelwork, page 652 Dimensions and Weights of Copper Pipes, page 657 Dimensions of Stainless Steel Pipes, page 658 Dimensions of Steel Pipes, page 659 Approximate Metres per Tonne of Tubes, page 660 Flange Dimension Chart, page 661 Minimum Distances Between Supports/Fixings, page 663 Litres of Water Storage Required per Person per Building Type, page 664 Recommended Air Conditioning Design Loads, page 664 Capacity and Dimensions of Galvanised Mild Steel Cisterns, page 665 Capacity of Cold Water Polypropylene Storage Cisterns, page 665 Minimum Insulation Thickness to Protect Against Frost, page 666 Insulation Thickness for Chilled Water Supplies to Prevent Condensation, page 666 Insulation Thickness for Non-Domestic Heating Installations to Control Heat Loss, page 667

646

Tables and Memoranda CONVERSION TABLES

LENGTH Millimetre Metre Kilometre Kilometre

(mm) (m) (km) (km)

NOTE :

1 1 1 1

in ft yd mile

= = = =

25.4 0.3048 0.9144 1.6093

mm m m km

= = =

10 100 1000

mm cm m

= = = = = =

645.2 6.4516 0.0929 0.8361 2.590 0.405

mm2 cm2 m2 m2 km2 ha

1 cm2 1 m2 1 km2

= = =

100 10000 100

mm2 cm2 ha

1 cm3 1 dm3 1 m3 1 m3 1L 1L 1L

= = = = = = =

0.0610 0.0353 35.315 1.3080 1.76 2.113 0.220

in3 ft3 ft3 yd3 pint US pt gal

1 1 1 1

dm3 m3 L HL

= = = =

1000 1000 1 100

cm3 dm3 dm3 L

1 1 1 1 1

mg g kg kg t

= = = = =

0.0154 0.0353 2.2046 0.020 0.9842

grain oz lb cwt ton

= = =

1000 1000 1000

mg g kg

1 cm 1m 1 km

: : : :

1 1 1 1

mm m m km

= = = =

0.0394 3.2808 1.0936 0.6214

in ft yd mile

1 ft 1 yd 1 mile

= = =

12 3 1760

in ft yd

1 1 1 1 1 1

mm2 cm2 m2 m2 km2 ha

= = = = = =

0.0016 0.1550 10.764 1.1960 0.3861 2.471

in2 in2 ft2 yd2 mile2 acre

1 1 1 1

ft2 yd2 mile2 acre

= = = =

144 9 640 4840

in2 ft2 acre yd2

1 in3 1 ft3 1 ft3 1 yd3 1 pint 1 pint 1 gal

= = = = = = =

16.387 28.329 0.0283 0.7646 0.5683 0.4733 4.546

cm3 dm3 m3 m3 L US L L

1 1 1 1

ft3 yd3 pint gal

= = = =

1728 27 20 8

in3 ft3 fl oz pints

1 1 1 1 1

grain oz lb cwt ton

= = = = =

64.935 28.35 0.4536 50.802 1.016

mg g kg kg t

1 1 1 1 1

oz lb stone cwt ton

= = = = =

437.5 16 14 112 20

grains oz lb lb cwt

AREA Square Millimetre Square Centimetre Square Metre Square Metre Square Kilometre Hectare

(mm2) (cm2) (m2) (m2) (km2) (ha)

NOTE :

1 1 1 1 1 1

in2 in2 ft2 yd2 mile2 acre

: : : : : :

VOLUME Cubic Cubic Cubic Cubic Litre Litre Litre

Centimetre Decimetre Metre Metre

(cm3) (dm3) (m3) (m3) (L) (L) (L)

NOTE :

: : : : : :

MASS Milligram Gram Kilogram Kilogram Tonne NOTE :

(mg) (g) (kg) (kg) (t)

1g 1 kg 1t

: : : : :

Tables and Memoranda

647

CONVERSION TABLES

FORCE Newton Kilonewton Meganewton

(N) (kN) (MN)

1 lb f 1 lb f 100 ton f

= = =

4.448 0.004448 0.9964

N kN MN

: 1 kg f : 1 ton f

= =

9.807 9.964

N kN

(kW)

1 kW

=

1.341

HP

: 1 HP

=

0.746

kW

POWER Kilowatt

PRESSURE AND STRESS Kilonewton per square metre (kN/m2)

1 1 1 1 1

lb f/in2 bar ton f/ft2 kg f/cm2 lb f/ft2

= = = = =

6.895 100 107.3 98.07 0.0479

kN/m2 kN/m2 kN/m2 kN/m2 kN/m2

TEMPERATURE Degrees

C = 5 / 9 (oF − 32o)

o

o

F = 9 / 5 x (oC + 32)

648

Tables and Memoranda FORMULAE

Two dimensional figures Figure

Area

Triangle

0.5 x base x height, or √(s(s − a)(s − b)(s − c)) where s = 0.5 x the sum of the three sides and a, b and c are the lengths of the three sides, or a2 = b2 + c2 − 2 x bc x COS A where A is the angle opposite side a

Hexagon

2.6 x (side)2

Octagon

4.83 x (side)2

Trapezoid

height x 0.5 (base + top)

Circle

3.142 x radius2 or 0.7854 x diameter2 (circumference = 2 x 3.142 x radius or 3.142 x diameter)

Sector of a circle

0.5 x length of arc x radius

Segment of a circle

area of sector − area of triangle

Ellipse of a circle

3.142 x AB (where A = 0.5 x height and B = 0.5 x length)

Spandrel

3/14 x radius2

Three dimensional figures Figure

Volume Surface

Area

Prism x height

Area of base x height

circumference of base

Cube

(length of side) cubed

6 x (length of side)2

Cylinder

3.142 x radius2 x height

2 x 3.142 x radius x (height − radius)

3

Sphere

4/3 x 3.142 x radius

4 x 3.142 x radius2

Segment of a sphere

[(3.142 x h)/6] x (3 x r2 + h2)

(2 x 3.142 x r x h)

Pyramid

1/3 x (area of base x height)

0.5 x circumference of base x slant height

Tables and Memoranda

649

FRACTIONS, DECIMALS AND MILLIMETRE EQUIVALENTS

Fractions

Decimals

mm

Fractions

Decimals

mm

1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

0.015625 0.03125 0.046875 0.0625 0.078125 0.09375 0.109375 0.125 0.140625 0.15625 0.171875 0.1875 0.203125 0.21875 0.234375 0.25 0.265625 0.28125 0.296875 0.3125 0.328125 0.34375 0.359375 0.375 0.390625 0.40625 0.421875 0.4375 0.453125 0.46875 0.484375 0.5

0.396875 0.79375 1.190625 1.5875 1.984375 2.38125 2.778125 3.175 3.571875 3.96875 4.365625 4.7625 5.159375 5.55625 5.953125 6.35 6.746875 7.14375 7.540625 7.9375 8.334375 8.73125 9.128125 9.525 9.921875 10.31875 10.71563 11.1125 11.50938 11.90625 12.30313 12.7

33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1.0

0.515625 0.53125 0.546875 0.5625 0.578125 0.59375 0.609375 0.625 0.640625 0.65625 0.671875 0.6875 0.703125 0.71875 0.734375 0.75 0.765625 0.78125 0.796875 0.8125 0.828125 0.84375 0.859375 0.875 0.890625 0.90625 0.921875 0.9375 0.953125 0.96875 0.984375 1

13.096875 13.49375 13.890625 14.2875 14.684375 15.08125 15.478125 15.875 16.271875 16.66875 17.065625 17.4625 17.859375 18.25625 18.653125 19.05 19.446875 19.84375 20.240625 20.6375 21.034375 21.43125 21.828125 22.225 22.621875 23.01875 23.415625 23.8125 24.209375 24.60625 25.003125 25.4

650

Tables and Memoranda IMPERIAL STANDARD WIRE GAUGE (SWG)

SWG No

inches

Diameter mm

7/0 6/0 5/0 4/0 3/0 2/0 1/0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

0.5 0.464 0.432 0.4 0.372 0.348 0.324 0.3 0.276 0.252 0.232 0.212 0.192 0.176 0.16 0.144 0.128 0.116 0.104 0.092 0.08 0.072 0.064 0.056 0.048 0.04 0.036 0.032 0.028

12.7 11.79 10.97 10.16 9.45 8.84 8.23 7.62 7.01 6.4 5.89 5.38 4.88 4.47 4.06 3.66 3.25 2.95 2.64 2.34 2.03 1.83 1.63 1.42 1.22 1.016 0.914 0.813 0.711

SWG No

inches

Diameter mm

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

0.024 0.022 0.02 0.018 0.0164 0.0148 0.0136 0.0124 0.0116 0.0108 0.01 0.009 0.008 0.008 0.007 0.006 0.005 0.005 0.004 0.004 0.004 0.003 0.003 0.002 0.002 0.002 0.001 0.001

0.61 0.559 0.508 0.457 0.417 0.376 0.345 0.315 0.295 0.274 0.254 0.234 0.213 0.193 0.173 0.152 0.132 0.122 0.112 0.102 0.091 0.081 0.071 0.061 0.051 0.041 0.031 0.025

Tables and Memoranda

651

WATER PRESSURE DUE TO HEIGHT

Imperial Head Feet

Pressure lb/in2

Head Feet

Pressure lb/in2

1 5 10 15 20 25 30 35 40 45 50 55 60 65

0.43 2.17 4.34 6.5 8.67 10.84 13.01 15.17 17.34 19.51 21.68 23.84 26.01 28.18

70 75 80 85 90 95 100 105 110 120 130 140 150

30.35 32.51 34.68 36.85 39.02 41.18 43.35 45.52 47.69 52.02 56.36 60.69 65.03

Metric Head m

Pressure bar

Head m

Pressure bar

0.5 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0

0.049 0.098 0.147 0.196 0.294 0.392 0.491 0.589 0.687 0.785 0.883 0.981 1.079 1.177 1.275 1.373 1.472 1.57 1.668

18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 32.5 35.0 37.5 40.0 42.5 45.0

1.766 1.864 1.962 2.06 2.158 2.256 2.354 2.453 2.551 2.649 2.747 2.845 2.943 3.188 3.434 3.679 3.924 4.169 4.415

1 1 1 1 1

bar lbf/in2 metre foot in wg

= = = = =

14.5038 lbf/in2 0.06895 bar 3.2808 ft or 39.3701 in 0.3048 metres 2.5 mbar (249.1 N/m2)

652

Tables and Memoranda TABLE OF WEIGHTS FOR STEELWORK

Mild Steel Bar Diameter (mm)

Weight (kg/m)

Diameter (mm)

Weight (kg/m)

6 10 12 16

0.22 0.62 0.89 1.58

20 25 30 32

2.47 3.85 5.55 6.31

Size (mm)

Weight (kg/m)

Mild Steel Flat Size (mm)

Weight (kg/m)

15 20 25 30 40 45 50

x x x x x x x

3 3 3 3 3 3 3

0.36 0.47 0.59 0.71 0.94 1.06 1.18

15 20 25 30 40 45 50

x x x x x x x

5 5 5 5 5 5 5

0.59 0.79 0.98 1.18 1.57 1.77 1.96

20 25 30 40 45 50 55 60 65 70 75 100

x x x x x x x x x x x x

6 6 6 6 6 6 6 6 6 6 6 6

0.94 1.18 1.41 1.88 2.12 2.36 2.60 2.83 3.06 3.30 3.53 4.71

20 25 30 40 45 50 55 60 65 70 75 100

x x x x x x x x x x x x

8 8 8 8 8 8 8 8 8 8 8 8

1.26 1.57 1.88 2.51 2.83 3.14 3.45 3.77 4.08 4.40 4.71 6.28

20 25 30 40 45 50 55 60 65 70 75 100

x x x x x x x x x x x x

10 10 10 10 10 10 10 10 10 10 10 10

1.57 1.96 2.36 3.14 3.53 3.93 4.32 4.71 5.10 5.50 5.89 7.85

20 25 30 40 45 50 55 60 65 70 75 100

x x x x x x x x x x x x

12 12 12 12 12 12 12 12 12 12 12 12

1.88 2.36 2.83 3.77 4.24 4.71 5.12 5.65 6.12 6.59 7.07 9.42

Tables and Memoranda

653

TABLE OF WEIGHTS FOR STEELWORK

Mild Steel Equal Angle Size (mm)

Weight (kg/m)

Size (mm)

Weight (kg/m)

13 20 25 30 40 45 50

x x x x x x x

013 020 025 030 040 045 050

x x x x x x x

3 3 3 3 3 3 3

0.56 0.88 1.11 1.36 1.82 2.06 2.30

60 70 75 80 90 100 120 150

x x x x x x x x

060 070 075 080 090 100 120 156

x x x x x x x x

10 10 10 10 10 10 10 10

8.69 10.30 11.05 11.90 13.40 15.00 18.20 23.00

30 40 45 50 60 70 75 80 90

x x x x x x x x x

030 040 045 050 060 070 075 080 090

x x x x x x x x x

6 6 6 6 6 6 6 6 6

2.56 3.52 4.00 4.47 5.42 6.38 6.82 7.34 8.30

75 80 90 100 120 150 200

x x x x x x x

075 080 090 120 120 150 200

x x x x x x x

12 12 12 12 12 12 12

13.07 14.00 15.90 21.60 21.90 27.30 36.74

40 50 60 70 75 80 90 100 120

x x x x x x x x x

040 050 060 070 075 080 090 100 120

x x x x x x x x x

8 8 8 8 8 8 8 8 8

4.55 5.82 7.09 8.36 8.96 9.63 10.90 12.20 14.70

Mild Steel Unequal Angle Size (mm)

Weight (kg/m)

Size (mm)

Weight (kg/m)

40 50 60 65 75 80 125

x x x x x x x

025 040 030 050 050 060 075

x x x x x x x

6 6 6 6 6 6 6

2.79 4.24 3.99 5.16 5.65 6.37 9.18

100 100 125 150 150 200

x x x x x x

065 075 075 075 090 100

x x x x x x

10 10 10 10 10 10

12.30 13.00 15.00 17.00 18.20 23.00

75 80 100 100 125 137

x x x x x x

050 060 065 075 075 102

x x x x x x

8 8 8 8 8 8

7.39 8.34 9.94 10.60 12.20 14.88

100 125 150 150 200 200

x x x x x x

075 075 075 090 100 150

x x x x x x

12 12 12 12 12 12

15.40 17.80 20.20 21.60 27.30 32.00

654

Tables and Memoranda TABLE OF WEIGHTS FOR STEELWORK

Rolled Steel Channels Size (mm) 32 38 51 51 64 76 76 102 127 152 152

x x x x x x x x x x x

27 19 25 38 25 38 51 51 64 76 89

Weight (kg/m)

Size (mm)

2.80 2.49 4.46 5.80 6.70 7.46 9.45 10.42 14.90 17.88 23.84

178 178 203 203 229 229 254 254 305 305 381

x x x x x x x x x x x

Weight (kg/m) 076 079 076 089 076 089 076 089 089 102 102

20.84 26.81 23.82 29.78 26.06 32.76 28.29 35.74 41.67 46.18 55.10

Rolled Steel Joists Size (mm) 76 76 102 102 102 127 127 127

x x x x x x x x

038 076 044 064 102 076 114 114

Weight (kg/m)

Size (mm)

6.25 12.65 7.44 9.65 23.06 13.36 26.78 29.76

152 152 152 178 203 203 254 254 305

x x x x x x x x x

Weight (kg/m) 076 089 127 102 102 152 114 203 203

17.86 17.09 37.20 21.54 25.33 52.03 37.20 81.84 96.72

Universal Columns Size (mm) 152 152 152 203 203 203 203 203 254

x x x x x x x x x

152 152 152 203 203 203 203 203 254

Weight (kg/m)

Size (mm)

23.00 30.00 37.00 46.00 52.00 60.00 71.00 86.00 73.00

254 254 254 254 305 305 305 305 305

x x x x x x x x x

Weight (kg/m) 254 254 254 254 305 305 305 305 305

89.00 107.00 132.00 167.00 97.00 118.00 137.00 158.00 198.00

Tables and Memoranda

655

TABLE OF WEIGHTS FOR STEELWORK

Universal Beams Size (mm) 203 203 254 254 254 254 254 254 305 305 305 305 305

x x x x x x x x x x x x x

133 133 102 102 102 146 146 146 102 102 102 127 127

Weight (kg/m)

Size (mm)

25.00 30.00 22.00 25.00 28.00 31.00 37.00 43.00 25.00 28.00 33.00 37.00 42.00

305 305 305 305 356 356 356 356 356 356 381 381 381

x x x x x x x x x x x x x

Weight (kg/m) 127 165 165 165 127 127 171 171 171 171 152 152 152

48.00 40.00 46.00 54.00 33.00 39.00 45.00 51.00 57.00 67.00 52.00 60.00 67.00

Circular Hollow Sections Size (mm) 21.3 26.9 33.7 33.7 33.7 42.4 42.4 42.4 48.3 48.3 48.3 60.3 60.3 60.3

x x x x x x x x x x x x x x

3.2 3.2 2.6 3.2 4.0 2.6 3.2 4.0 3.2 4.0 5.0 3.2 4.0 5.0

Weight (kg/m)

Size (mm)

1.43 1.87 1.99 2.41 2.93 2.55 3.09 3.79 3.56 4.37 5.34 4.51 5.55 6.82

76.1 76.1 76.1 88.9 88.9 88.9 114.3 114.3 114.3 139.7 139.7 139.7 139.7 168.3

Weight (kg/m) x x x x x x x x x x x x x x

03.2 04.0 05.0 03.2 04.0 05.0 03.6 05.0 06.3 05.0 06.3 08.0 10.0 05.0

5.75 7.11 8.77 6.76 8.36 10.30 9.83 13.50 16.80 16.60 20.70 26.00 32.00 20.10

656

Tables and Memoranda TABLE OF WEIGHTS FOR STEELWORK

Square Hollow Sections Size (mm) 20 20 30 30 40 40 40 50 50 50 60 60 60 70 70 80 80 80

x x x x x x x x x x x x x x x x x x

20 20 30 30 40 40 40 50 50 50 60 60 60 70 70 80 80 80

x x x x x x x x x x x x x x x x x x

2.0 2.6 2.6 3.2 2.6 3.2 4.0 3.2 4.0 5.0 3.2 4.0 5.0 3.2 5.0 3.6 5.0 6.3

Weight (kg/m)

Size (mm)

1.12 1.39 2.21 2.65 3.03 3.66 4.46 4.66 5.72 6.97 5.67 6.97 8.54 7.46 10.10 8.59 11.70 14.40

90 90 90 100 100 100 100 100 120 120 120 120 150 150 150 150

x x x x x x x x x x x x x x x x

Weight (kg/m) 090 090 090 100 100 100 100 100 120 120 120 120 150 150 150 150

x x x x x x x x x x x x x x x x

03.6 05.0 06.3 04.0 05.0 06.3 08.0 10.0 05.0 06.3 08.0 10.0 05.0 06.3 08.0 10.0

9.72 13.30 16.40 12.00 14.80 18.40 22.90 27.90 18.00 22.30 27.90 34.20 22.70 28.30 35.40 43.60

Rectangular Hollow Sections Size (mm) 50 50 60 60 80 80 90 90 100 100 100 100 100 100 120 120 120

x x x x x x x x x x x x x x x x x

30 30 40 40 40 40 50 50 50 50 50 60 60 60 60 60 60

x x x x x x x x x x x x x x x x x

2.6 3.2 3.2 4.0 3.2 4.0 3.6 5.0 3.2 4.0 5.0 3.6 5.0 6.3 3.6 5.0 6.3

Weight (kg/m)

Size (mm)

3.03 3.66 4.66 5.72 5.67 6.97 7.46 10.10 7.18 8.86 10.90 8.59 11.70 14.40 9.72 13.30 16.40

120 120 120 120 150 150 150 150 160 160 160 160 200 200 200 200

x x x x x x x x x x x x x x x x

Weight (kg/m) 080 080 080 080 100 100 100 100 080 080 080 080 100 100 100 100

x x x x x x x x x x x x x x x x

05.0 06.3 08.0 10.0 05.0 06.3 08.0 10.0 05.0 06.3 08.0 10.0 05.0 06.3 08.0 10.0

14.80 18.40 22.90 27.90 18.70 23.30 29.10 35.70 18.00 22.30 27.90 34.20 22.70 28.30 35.40 43.60

Tables and Memoranda

657

DIMENSIONS AND WEIGHTS OF COPPER PIPES TO BSEN 1057, BSEN 12499, BSEN 14251

Outside Diameter (mm)

Internal Diameter (mm)

Weight per Metre (kg)

Formerly Table X

Internal Diameter (mm)

Weight per Metre (kg)

Formerly Table Y

Internal Diameter (mm)

Weight per Metre (kg)

Formerly Table Z

6

4.80

0.0911

4.40

0.1170

5.00

0.0774

8

6.80

0.1246

6.40

0.1617

7.00

0.1054

10

8.80

0.1580

8.40

0.2064

9.00

0.1334

12

10.80

0.1914

10.40

0.2511

11.00

0.1612

15

13.60

0.2796

13.00

0.3923

14.00

0.2031

18

16.40

0.3852

16.00

0.4760

16.80

0.2918

22

20.22

0.5308

19.62

0.6974

20.82

0.3589

28

26.22

0.6814

25.62

0.8985

26.82

0.4594

35

32.63

1.1334

32.03

1.4085

33.63

0.6701

42

39.63

1.3675

39.03

1.6996

40.43

0.9216

54

51.63

1.7691

50.03

2.9052

52.23

1.3343

76.1

73.22

3.1287

72.22

4.1437

73.82

2.5131

108

105.12

4.4666

103.12

7.3745

105.72

3.5834

133

130.38

5.5151

–

–

130.38

5.5151

159

155.38

8.7795

–

–

156.38

6.6056

658

Tables and Memoranda DIMENSIONS OF STAINLESS STEEL PIPES TO BS 4127

Outside Diameter

Minimum Outside Diameter (mm)

Wall Thickness

Working Pressure

(mm)

Maximum Outside Diameter (mm)

(mm)

(bar)

6

6.045

5.940

0.6

330

8

8.045

7.940

0.6

260

10

10.045

9.940

0.6

210

12

12.045

11.940

0.6

170

15

15.045

14.940

0.6

140

18

18.045

17.940

0.7

135

22

22.055

21.950

0.7

110

28

28.055

27.950

0.8

121

35

35.070

34.965

1.0

100

42

42.070

41.965

1.1

91

54

54.090

53.940

1.2

77

Tables and Memoranda

659

DIMENSIONS OF STEEL PIPES TO BS 1387

Nominal Size

Approx. Outside Diameter

Outside Diameter

Max.

Min.

Max.

Min.

mm

mm

mm

mm

mm

6

10.20

10.10

9.70

Light

Thickness

Medium & Heavy

Light

Medium

Heavy

mm

mm

mm

mm

10.40

9.80

1.80

2.00

2.65

8

13.50

13.60

13.20

13.90

13.30

1.80

2.35

2.90

10

17.20

17.10

16.70

17.40

16.80

1.80

2.35

2.90

15

21.30

21.40

21.00

21.70

21.10

2.00

2.65

3.25

20

26.90

26.90

26.40

27.20

26.60

2.35

2.65

3.25

25

33.70

33.80

33.20

34.20

33.40

2.65

3.25

4.05

32

42.40

42.50

41.90

42.90

42.10

2.65

3.25

4.05

40

48.30

48.40

47.80

48.80

48.00

2.90

3.25

4.05

50

60.30

60.20

59.60

60.80

59.80

2.90

3.65

4.50

65

76.10

76.00

75.20

76.60

75.40

3.25

3.65

4.50

80

88.90

88.70

87.90

89.50

88.10

3.25

4.05

4.85

100

114.30

113.90

113.00

114.90

113.30

3.65

4.50

5.40

125

139.70

–

–

140.60

138.70

–

4.85

5.40

150

165.1*

–

–

166.10

164.10

–

4.85

5.40

* 165.1mm (6.5in) outside diameter is not generally recommended except where screwing to BS 21 is necessary. All dimensions are in accordance with ISO R65 except approximate outside diameters which are in accordance with ISO R64. Light quality is equivalent to ISO R65 Light Series II.

660

Tables and Memoranda APPROXIMATE METRES PER TONNE OF TUBES TO BS 1387

BLACK Nom. Size

Plain/screwed ends

GALVANISED

Screwed & socketed

Plain/screwed ends

Screwed & socketed

L

M

H

L

M

H

L

M

H

L

M

H

mm

m

m

m

m

m

m

m

m

m

m

m

m

6

2765

2461

2030

2743

2443

2018

2604

2333

1948

2584

2317

1937

8

1936

1538

1300

1920

1527

1292

1826

1467

1254

1811

1458

1247

10

1483

1173

979

1471

1165

974

1400

1120

944

1386

1113

939

15

1050

817

688

1040

811

684

996

785

665

987

779

661

20

712

634

529

704

628

525

679

609

512

673

603

508

25

498

410

336

494

407

334

478

396

327

474

394

325

32

388

319

260

384

316

259

373

308

254

369

305

252

40

307

277

226

303

273

223

296

268

220

292

264

217

50

244

196

162

239

194

160

235

191

158

231

188

157

65

172

153

127

169

151

125

167

149

124

163

146

122

80

147

118

99

143

116

98

142

115

97

139

113

96

100

101

82

69

98

81

68

98

81

68

95

79

67

125

–

62

56

–

60

55

–

60

55

–

59

54

150

–

52

47

–

50

46

–

51

46

–

49

45

The figures for `plain or screwed ends' apply also to tubes to BS 1775 of equivalent size and thickness. Key L – Light M – Medium H – Heavy

Tables and Memoranda

661

FLANGE DIMENSION CHART TO BS 4504 & BS 10

Normal Pressure Rating (PN 6) 6 Bar Nom. Flange Size Outside Diam.

Table 6/2 Forged Welding Neck

Table 6/3 Plate Slip on

80

12

20

90

25

100

32

Table 6/4 Forged Bossed Screwed

Table 6/5 Forged Bossed Slip on

Table 6/8 Plate Blank

12

12

12

12

40

14

14

14

14

14

14

14

14

14

14

120

14

16

14

14

40

130

14

16

14

50

140

14

16

14

65

160

14

16

15

Nr. Bolt Hole

Size of Bolt

2

4

M10 x 40

50

2

4

M10 x 45

60

2

4

M10 x 45

14

70

2

4

M12 x 45

14

14

80

3

4

M12 x 45

14

14

90

3

4

M12 x 45

14

14

14

110

3

4

M12 x 45

Raised Face

Diam. T’ness

80

190

16

18

16

16

16

128

3

4

M16 x 55

100

210

16

18

16

16

16

148

3

4

M16 x 55

125

240

18

20

18

18

18

178

3

8

M16 x 60

150

265

18

20

18

18

18

202

3

8

M16 x 60

200

320

20

22

–

20

20

258

3

8

M16 x 60

250

375

22

24

–

22

22

312

3

12

M16 x 65

300

440

22

24

–

22

22

365

4

12

M20 x 70

662

Tables and Memoranda FLANGE DIMENSION CHART TO BS 4504 & BS 10

Normal Pressure Rating (PN 16) 16 Bar Nom. Flange Size Outside Diam.

Table 6/2 Forged Welding Neck

Table 6/3 Plate Slip on

14

14

Table 6/4 Forged Bossed Screwed

Table 6/5 Forged Bossed Slip on

Table 6/8 Plate Blank

14

14

14

45

Nr. Bolt Hole

Size of Bolt

2

4

M12 x 45

Raised Face

Diam. T’ness

15

95

20

105

16

16

16

16

16

58

2

4

M12 x 50

25

115

16

16

16

16

16

68

2

4

M12 x 50

32

140

16

16

16

16

16

78

2

4

M16 x 55

40

150

16

16

16

16

16

88

3

4

M16 x 55

50

165

18

18

18

18

18

102

3

4

M16 x 60

65

185

18

18

18

18

18

122

3

4

M16 x 60

80

200

20

20

20

20

20

138

3

8

M16 x 60

100

220

20

20

20

20

20

158

3

8

M16 x 65

125

250

22

22

22

22

22

188

3

8

M16 x 70

150

285

22

22

22

22

22

212

3

8

M20 x 70

200

340

24

24

–

24

24

268

3

12

M20 x 75

250

405

26

26

–

26

26

320

3

12

M24 x 90

300

460

28

28

–

28

28

378

4

12

M24 x 90

Tables and Memoranda

663

MINIMUM DISTANCES BETWEEN SUPPORTS/FIXINGS

Material

Copper

muPVC

Polypropylene

uPVC

Steel

BS Nominal Pipe Size

Pipes – Vertical

Pipes – Horizontal on to low gradients

inch

mm

support distance in metres

support distance in metres

0.50

15.00

1.90

1.30

0.75

22.00

2.50

1.90

1.00

28.00

2.50

1.90

1.25

35.00

2.80

2.50

1.50

42.00

2.80

2.50

2.00

54.00

3.90

2.50

2.50

67.00

3.90

2.80

3.00

76.10

3.90

2.80

4.00

108.00

3.90

2.80

5.00

133.00

3.90

2.80

6.00

159.00

3.90

2.80

1.25

32.00

1.20

0.50

1.50

40.00

1.20

0.50

2.00

50.00

1.20

0.60

1.25

32.00

1.20

0.50

1.50

40.00

1.20

0.50

–

82.40

1.20

0.50

–

110.00

1.80

0.90

–

160.00

1.80

1.20

0.50

15.00

2.40

1.80

0.75

20.00

3.00

2.40

1.00

25.00

3.00

2.40

1.25

32.00

3.00

2.40

1.50

40.00

3.70

2.40

2.00

50.00

3.70

2.40

2.50

65.00

4.60

3.00

3.00

80.40

4.60

3.00

4.00

100.00

4.60

3.00

5.00

125.00

5.50

3.70

6.00

150.00

5.50

4.50

8.00

200.00

8.50

6.00

10.00

250.00

9.00

6.50

12.00

300.00

10.00

7.00

16.00

400.00

10.00

8.25

664

Tables and Memoranda LITRES OF WATER STORAGE REQUIRED PER PERSON PER BUILDING TYPE

Type of Building

Storage litres

Houses and flats (up to 4 bedrooms

120/bedroom

Houses and flats (more than 4 bedrooms)

100/bedroom

Hostels

90/bed

Hotels

200/bed

Nurses homes and medical quarters

120/bed

Offices with canteen

45/person

Offices without canteen

40/person

Restaurants

7/meal

Boarding schools

90/person

Day schools – Primary

15/person

Day schools – Secondary

20/person

RECOMMENDED AIR CONDITIONING DESIGN LOADS

Building Type

Design Loading

Computer rooms

500 W/m² of floor area

Restaurants

150 W/m² of floor area

Banks (main area)

100 W/m² of floor area

Supermarkets

25 W/m² of floor area

Large Office Block (exterior zone)

100 W/m² of floor area

Large Office Block (interior zone)

80 W/m² of floor area

Small Office Block (interior zone)

80 W/m² of floor area

Tables and Memoranda

665

CAPACITY AND DIMENSIONS OF GALVANISED MILD STEEL CISTERNS – BS 417

Capacity (litres)

BS type (SCM)

18

Dimensions Length (mm)

Width (mm)

Depth (mm)

45

457

305

305

36

70

610

305

371

54

90

610

406

371

68

110

610

432

432

86

135

610

457

482

114

180

686

508

508

159

230

736

559

559

191

270

762

584

610

227

320

914

610

584

264

360

914

660

610

327

450/1

1220

610

610

336

450/2

965

686

686

423

570

965

762

787

491

680

1090

864

736

709

910

1070

889

889

CAPACITY OF COLD WATER POLYPROPYLENE STORAGE CISTERNS – BS 4213

Capacity (litres)

BS type (PC)

Maximum Height mm

18

4

310

36

8

380

68

15

430

91

20

510

114

25

530

182

40

610

227

50

660

273

60

660

318

70

660

455

100

760

666

Tables and Memoranda

MINIMUM INSULATION THICKNESS TO PROTECT AGAINST FREEZING FOR DOMESTIC COLD WATER SYSTEMS (8 Hour Evaluation Period)

Insulation thickness (mm) Pipe size (mm)

Condition 1 λ = 0.020

λ = 0.030

15

11

22

6

28 35

Condition 2 λ = 0.040

λ = 0.020

λ = 0.030

λ = 0.040

20

34

12

23

41

9

13

6

10

15

4

6

9

4

7

10

3

5

7

4

5

7

42 54

3 2

4 3

5 4

8 2

4 3

6 4

76

2

2

3

2

2

3

15

9

15

24

10

18

29

20

6

9

13

6

10

15

25

4

7

9

5

7

10

32 40

3 3

5 4

6 5

3 3

5 4

7 6

50

2

3

4

2

3

4

65

2

2

3

2

3

3

Copper pipes

Steel pipes

Condition 1 : water temperature 7°C; ambient temperature –6°C; evaluation period 8 h; permitted ice formation 50%; normal installation, i.e. inside the building and inside the envelope of the structural insulation Condition 2 : water temperature 2°C; ambient temperature –6°C; evaluation period 8 h; permitted ice formation 50%; extreme installation, i.e. inside the building but outside the envelope of the structural insulation λ = thermal conductivity [W/(mK)] INSULATION THICKNESS FOR CHILLED AND COLD WATER SUPPLIES TO PREVENT CONDENSATION On A Low Emissivity Outer Surface (0.05, i.e. Bright Reinforced Aluminium Foil) With An Ambient Temperature Of +25°C And A Relative Humidity Of 80% t = +10 Steel pipe size (mm)

t = +5

t=0

Insulation thickness (mm)

Insulation thickness (mm)

Insulation thickness (mm)

λ= 0.030

λ= 0.040

λ= 0.050

λ= 0.030

λ= 0.040

λ= 0.050

λ= 0.030

λ= 0.040

λ= 0.050

15

16

20

25

22

28

34

28

36

43

25

18

24

29

25

32

39

32

41

50

50

22

28

34

30

39

47

38

49

60

100

26

34

41

36

47

57

46

60

73

150

29

38

46

40

52

64

51

67

82

250 Flat surfaces

33 39

43 52

53 65

46 56

60 75

74 93

59 73

77 97

94 122

t = temperature of contents (°C) λ = thermal conductivity at mean temperature of insulation [W/(mK)]

Tables and Memoranda

667

INSULATION THICKNESS FOR NON-DOMESTIC HEATING INSTALLATIONS TO CONTROL HEAT LOSS

Steel pipe size (mm)

t = 75

t = 100

t = 150

Insulation thickness (mm)

Insulation thickness (mm)

Insulation thickness (mm)

λ = 0.030 λ = 0.040 λ = 0.050 λ = 0.030 λ = 0.040 λ = 0.050 λ = 0.030 λ = 0.040 λ = 0.050

10

18

32

55

20

36

62

23

44

77

15

19

34

56

21

38

64

26

47

80

20

21

36

57

23

40

65

28

50

83

25

23

38

58

26

43

68

31

53

85

32

24

39

59

28

45

69

33

55

87

40 50

25 27

40 42

60 61

29 31

47 49

70 72

35 37

57 59

88 90

65

29

43

62

33

51

74

40

63

92

80

30

44

62

35

52

75

42

65

94

100

31

46

63

37

54

76

45

68

96

150

33

48

64

40

57

77

50

73

100

200

35

49

65

42

59

79

53

76

103

250

36

50

66

43

61

80

55

78

105

t = hot face temperature (°C) λ = thermal conductivity at mean temperature of insulation [W/(mK)]

Index Above Ground Drainage brackets, cast iron 170 pipes, PVC-U 155 ABS pipe & Solvent Weld Fittings 207 AC Static Inverter System, AC power supply to luminaires 584 Access control alarm contact flush 598 emergency break glass double pole 598 exit button 598 exit PIR 598 magnetic swipe reader 598 proximity reader 598 Access Control Equipment, all-in-rates 87 access control system (ACS), schematic 43 Access Door, PVC-U, spill & waste 164 Acoustic Housings (for generators) 491 Adaptable Boxes square pattern 497 steel 509 Adaptor, copper pipes 183 AHU’s 476 Air Circuit Breakers (ACBs) ACB 65 kA fault rated 554 ACB 100kA fault rated 553 Air Cooled Condensers 357 Air Curtain Unit 484 Air Handling Units 86 Airport terminal, elemental cost 101 All-In-Rates 85 above ground drainage 85 access control 87 air handling units 86 CCTV 87 chilled water 85 chilled water / LTHW 89 data cabling 88 ductwork 86 electrical connection with mech’ services 93 external lighting 94 extract fans 86 fire alarms 93 generators 91 heat rejection 85

heat source 85 hose reels/dry risers 87 HV switchgear 91 lifts and escalators 95 lighting 93 LV switchgear 91 pipes 89 pumps 86 ring main units 91 small power 92 sprinklers 87 substation (packaged) 91 transformers 91 UPS 91 water installations 85 Allowances annual holiday allowances 622 daily travel allowance 617 lodging allowance 617 lodging allowances 622 mileage allowance 617 subsistence allowance 617 weekend lodging allowances 622 alternative all air system (FGU), schematic 43 Analogue Addressable Panels 601 Ancillaries 224 low temp’ hot water 295 regulators 224 Angle, Flat Cover, PVC trunking 503 Angle, Internal/External Cover, PVC trunking 504 Approximate Estimating 67 cost indices 69 stage C elemental rates 78 Aprons, PVC-U, fittings 166 Armoured Cable clipped direct to background 513 laid in trench 511 SWA & AWA XLPE PVC clipped 513 in trench, 511 Attenuators, DW144 galvanised, rectangular 454 Automatic Air Admittance, valves 166

670

Automatic Air Vents, valves 304 Automatic Power Factor Correction, floor standing steel enclosure 556 Automatic Transfer Switches enclosed type, 3 or 4 pole 556 with dual by-pass 557 with single by-pass 557 panel mounting type, 3 or 4 pole 556 Balcony Outlets, PVC-U 142 Basket, tray epoxy coated 552 zinc plated 551 Basket Tray, mild steel cable basket, zinc plated 551 Battery Chargers, HV switchgear 494 Bellmouth, gully drains 173 Bend, PVC-U 164 Bend, Flat/Internal/External, PVC miniature trunking 505 Bend, Internal/External, PVC bench trunking 506 Bends 90° double compartment, galvanised steel 499 single compartment, galvanised steel 499 triple compartment, galvanised steel 499 Biomass Boilers 8 Biomass Energy 27 Black Enamelled, heavy gauge, screwed drawn steel 496 Black steel pipes, low temp’ hot water pipe 268 BMS chilled water, schematic 43 BMS controls (LPHW), schematic 43 Boards and Panels 557 Body Coupler, 3 and 4 compartment, galvanised steel 502 Boilers all-in-rates 85 atmospheric, cast iron 258 condensing 258 domestic 254 forced draft cast iron sectional 255 steel shell 257 Borehole Cooling 8 Borehole System 19 Bosses, PVC-U, adaptor 165 Brackets 173 fixed to background 142 for copper pipes 181

Index

Brackets and Supports, ductile iron, mild steel 174 BREAAM 8 Breakers / Fuses 557 BSP, copper pipes 190 Building Management Installations, elemental cost 125 Building Management System, controls 608 Building Regulations 3, 7 Busbar chambers 562 edge elbow 537-538 edge tee 539 end cap 538 end cover 536 end feed unit 538 flat elbow 537-538 IP54 protection 536 lighting 539 main 536 offset 537 rising 538 top feeder unit 538 underfloor 540 Busbar Chambers, sheet steel case 562 Business Parks, elemental cost 107 Cabes Tiles 492 Cabinets floor standing 592 wall mounted 592 Cable 600/1000 volt grade, 2 core, galvanised steel wire armour 511, 513 600/1000 volt grade, 3 core, galvanised steel wire armour 511, 513 600/1000 volt grade, 4 core, galvanised steel wire armour 512, 514 600/1000 volt grade, 7 core, galvanised steel wire armour 512, 514 600/1000 volt grade, 12 core, galvanised steel wire armour 512, 514 600/1000 volt grade, 19 core, galvanised steel wire armour 512, 514 600/1000 volt grade, 27 core, galvanised steel wire armour 512, 514 600/1000 volt grade, 37 core, galvanised steel wire armour 513, 515 600/1000 volt grade, single core, aluminium wire armour 511, 513

Index

earth, 450/750 volt grade, Single core 524 fire rated 527 firetuff fire resistant 2 core 533 3 core 533 4 core 533 flexible 524 heavy duty fire rated cable, 750 volt grade, LSF sheathed 528 light duty fire rated cable 500 volt grade, bare 527 500 volt grade, LSF sheathed 527 750 volt grade, bare 527 modular 533 XLPE insulation, LSOH, laid in trench 517 Cable Basket 551 Cable Clip, high voltage 492 Cable Terminations brass weatherproof gland 515, 521 compound joint, glanding off 493 heavy duty, 750 volt grade 529 light duty, 500 volt grade 529 Cable Tray heavy duty galvanised steel, BS729 548 light duty galvanised steel, BS729 544 medium duty galvanised steel, BS729 546 Cable, FP100, 450/750 volt grade, single core 530 Cable, FP200 300/500 volt grade, 2 core 531 300/500 volt grade, 3 core 531 300/500 volt grade, 4 core 531 Cable, FP400 600/1000 volt grade, 2 core 531 600/1000 volt grade, 3 core 532 600/1000 volt grade, 4 core 532 Cable, LSF Insulated, 450/750 volt grade, single core, non-sheathed copper 523 Cable, Twin & Earth 300/500 volt grade, LSF/LSF 524 300/500 volt grade, PVC/PVC 523 Cable, XLPE Insulated, 300/500 volt grade, single core, PVC sheathed 523 Cables armoured 511 fibre optic 595 HV, XLPE 492 lighting controls 570 low voltage 511 telecommunications, laid on tray/basket 587

671

Cables and Wiring, armoured cable 511 Calorifiers non storage steam 351 non storage water 312 storage 235 Cast Resin Transformer, ventilated steel enclosure air natural 495 temperature controlled fans 495 Cat A Fit-out, elemental cost, office 106 CCTV Systems, all-in-rates 87 Ceiling Recessed Asymmetric Compact, fluorescent downlighter 565 Ceiling Roses batten holder, white moulded plastic, fixed to conduit 570 BC lampholder, white moulded plastic, flush fixed 570 white moulded plastic, flush fixed 570 Central battery system 583 Channel Sections, fabricated brackets 216 Check Valves, DRZ copper alloy and bronze 228 chilled beam system, schematic 43 Chilled Beams 365 chilled ceiling system, schematic 43 Chilled Water Pipes, pipes 361 Chillers absorption 355 air cooled 353 all-in-rates 85 dry air cooled 356 water cooled 354 CHP Combined Heat & Power 491 CHP Combined Heat and Power 8 Circuit Breaker, high voltage 494 Circuit Breakers (ACBs) ACB 65 kA fault rated 554 ACB 100kA fault rated 553 Circuit Breakers (MCCBs) MCCB 36 kA fault rated 555 MCCB 45 kA fault rated 555 MCCB 70 kA fault rated 555 MCCB 150 kA fault rated 554 Circular, pipes, PVC-U 141 Cistern, overflow 162 Class C, pipes, PVC-U 209 Class E, pipes, PVC-U 210 Cleaning & Chemical Treatment duplex configuration 232

672

electromagnetic water conditioner 231 simplex configuration 232 triplex configuration 233 ultraviolet water sterilising unit 232 Clock Timing Systems digital clock 591 internal wall mounted electric clock 591 matching clock 591 quartz battery movement 591 quartz master clock 591 radio receiver 591 wall clocks for impulse systems 591 Closed Loop System 16 Combined Heat & Power (CHP) 491 Conduit, flexible 496 Conduit and Cable Trunking, containment 496 Connection Unit galvanised steel box 574 moulded plastic box, standard fused 574 Connector Unit to immersion heater, moulded white plastic cover 575 Connectors copper pipes 184 roof Vent 177 Consumer Units 560 Containment basket 551 cable tray GRP 550 conduit 496 ladder rack 540 tray 544 Contractor Relays, pressed steel enclosure 562 Control Components FCU DDC control pack 483 immersion thermostats 347 surface thermostats 347 thermostatic radiator valves 347 Controllers damper actuators 609 frequency inverters 609 plant 608 zone 608 Cooker Control Units 45A, metal coverplate 575 45A, plastic box and coverplate 575 Cooling Tower, all-in-rates 85 Cooling Towers closed circuit type 359 open circuit type 358 Cooling Units, VRF, room units 367

Index

Copper Data Cabling, unshielded twisted pair, solid copper conductor 592 Copper Patch Leads, straight through booted 595 Copper Pipes bronze blank flanges 194 bronze screwed flanges 195 cold water brazed (silver) fittings 190 brazed (silver) flanges 195 bronze screw 195 compression fittings 190 high duty capillary 188 press fit mechanical joints 180 table x, cold water 180 Cost indices 70 Cost Model, façade system 39 Couplers, PVC-U 139 Coupling EPDM 174 PVC bench trunking 505 PVC miniature trunking 505 Crossovers double compartment, galvanised steel 501 PVC trunking 502 single compartment, galvanised steel 500 triple compartment, galvanised steel 501 Cylinders copper; direct 237 copper; indirect 236 storage 235 Dado Modular Trunking, PVC skirting 508 Daily Travelling Allowance, hourly rate 613 Dampers fire 435 smoke 437 volume control 434 Data Centre, elemental cost 123 data transmission, schematic 43 Data Transmission Equipment/Cabling, all-inrates 88 Day Care Units, RIBA Stage A Feasibility Cost 74 Daywork calculation of yearly rate 629 electrical 630 formula for the calculation of yearly rate 632 heating and ventilating industry 626 hourly rate of labour table, different grades 629 mechanical 625

Index

Dearators 306 Department Stores, RIBA Stage A Feasibility Cost 75 Detection/Alarm Equipment 599 Detectors, smoke/fire 600 Diagram 47 access control diagram 54 BMS control diagram 57 CCTV diagram 56 chilled beam diagram 62 chilled ceiling diagram 61 data transmission diagram 50 displacement diagram 60 fan grille unit (FGU) diagram 65 FCU diagram 59 fire detection diagram 53 heat pump diagram 66 intruder detection diagram 55 lighting control system diagram 51 standby power diagram 52 structured cabling diagram 50 typical simple 11K network connection diagram 47 UPS system diagram 49 VAV diagram 63 VRV diagram 64 Diffusers ceiling mounted, circular and rectangular 443 floor swirl 446 perforated 445 plastic air system 446 slot, aluminium 444 digital CCTV, schematic 43 Dimmer, electrical accessories 569 Dirt Separators 306 displacement system, schematic 43 Distribution Boards 558 LV switchgear 553 Distribution Cables armoured 533 unarmoured 535 Distribution Centres, elemental cost 122 Division Strip, PVC trunking, 1.8m long 504 Domed Outlets, PVC-U 142 Door Curtain Unit 484 Double Compartment Trunking, jointed with standard connectors, galvanised steel 498 Drains, floor, cast iron 178 Dry Air Cooler, all-in-rates 85 Dry Risers, all-in-rates 87

673

Duct Bend, PVC underfloor trunking horizontal 506 vertical 506 Duct Connector, PVC underfloor trunking 506 Ductwork access doors 410 all-in-rates 86 circular ductwork, class B 369 circular polypropylene 380 circular PVC ductwork 378 dampers fire 435 smoke 437 volume control 434 dura duct LT, fire rated 469 fire rated ductwork duct, 2 hr protection 457 duct, 4 hr protection 469 slab, mineral wool 469 flat oval ductwork 373 flexible ductwork 377 rectangular class B, galvanised sheet metal DW144 382 rectangular ductwork, class C 411 Dura duct, fire rated ductwork 469 DW144, ductwork 369 DW154, ductwork 378 DX Split Units, split type 367 Earth Cable, 450/750 volt grade, single core 524 Earthing & Bonding, earth bar, polymer insulators 602 Edge Elbow mains busbar 537 rising mains busbar 538 Edge Tee mains busbar 537 rising mains busbar 539 Edge Z Unit, mains busbar 537 Electrical Accessories dimmer switch, push on/off action 570 dimmer switch, rotary action 569 metal clad 570 Electrical Connection 33 Electrical Gang Rates 487 Electrical Installations 487 material cost 127 Electrical Rates of Wages 619 Electrical Supply 490

674

Elemental Cost airport terminal 101 building management installations 125 business parks 105 data centre 123 distribution centres 122 fit out Cat A 105 hospitals 114 hotels 112 office building 105 performing arts 109 residential affordable 117 residential private 119 school 116 shell and core 117 shopping malls 103 sports hall 111 stadium 113 supermarkets 121 Elemental Rates 73, 78 Elevators, all-in-rates 95 Emergency Central Battery System, supply to luminaires 583 Emergency Lighting 110 volt fluorescent luminaire 582 LED charging light European sign, polycarbonate base & diffuser 582 Enclosed Switch Disconnectors, enclosure minimum IP55 rating 562 End Cap, rising mains busbar 538 End Cover, mains busbar 536 End Feed Unit, rising mains busbar 538 Energy Calculation 4 Energy Meters, ultrasonic, electromagnetic 366 Entertainment and Recreation, RIBA Stage A Feasibility Cost 75 EPC –Energy Performance Certificate 8 EPDM, pipes, cast iron 173 Escalators, all-in-rates 100 Expansion Joints angular movement, stainless steel 296 axial movement, stainless steel 295 Extender Cables armoured 534 unarmoured 535 Extender Whip Ended Cables, armoured 534, 536 External Coupling, PVC trunking 503 External Lighting 566 all-in-rates 94

Index

bulkhead, polycarbonate/aluminium body 566 ceiling mounted 566 circular bollard, polycarbonate visor 567 floodlight 567 ground mounted 566 Fabricated Hangers and Brackets, galvanised steel 183 Façade System 37 cost model 39 energy performance 37 impact on M38 Factories 73 fan coil unit system, schematic 43 Fan Coil Units 480 Fans all-in-rates 86 axial flow fans 449 bifurcated 449 centrifugal 451 in-line centrifugal 451 kitchen fans 451 roof fans 450 toilet fans – domestic 451 twin extract 450 Feasibility Cost 73 Fibre Optic Cable, tight buffered, LSOH sheathed 595 Fibre Optic Connectors, single & multimode 596 Fibre Patch Leads 596 Filtered Socket Outlet, 13A, separate clean earth terminal, galvanised steel box 573 Filters, air bag 452 carbon, grease 453 panel 453 Fire Control Panels 600 Fire Dampers 434 Fire Detection and Alarm Equipment, all-in-rates 93 fire detection and alarm schematic, schematic 43 Fire Extinguishers, CO2, ABC 252 Fire Hose Reels, automatic; rubber, manual; rubber 244 Fire Hydrants 252 Fire Protection Control Panels 601 Fire Rated Cable 527 Fire Rated Ductwork dura duct LT, rectangular 469 rectangular 457

Index

Fit out Cat A, elemental cost, office 106 Fittings ABS, water 207 cast iron, EPDM 178 copper pipes 183 gutter, cast iron 142 moulded, cast iron 149 polypropylene waste, push fit 160 Flange Connections, galvanised steel 217 Flanged, connector, galvanised steel 499 Flanged Coupling, PVC trunking 503 Flanges, copper 193 Flat Elbow mains busbar 537 rising mains busbar 538 Flat Tee, rising mains busbar 539 Flat Z Unit, mains busbar 537 Flexible Cable 300 volt grade, 2 core 524 300 volt grade, 3 core 524 300/500 volt grade, 2 core 525 use in high temperature 525 300/500 volt grade, 3 core 525 use in high temperature 525 300/500 volt grade, 4 core 525 rubber insulated 300/500 volt grade, 2 core 525 300/500 volt grade, 3 core 525 300/500 volt grade, 4 core 526 450/750 volt grade, 2 core 526 450/750 volt grade, 3 core 526 450/750 volt grade, 4 core 526 Flexible Conduits metallic, PVC covered conduit, not exceeding 1m long 496 PVC conduit, not exceeding 1m long 496 Flexible Ductwork 377 Floor Drains, cast iron 178 Floor Outlet Box single 13A unswitched socket outlet, single compartment 574 twin 13A switched socket outlet 1 blank plate, 3 compartment 573 2 blank plate, 4 compartment 573 Floor Service Grommet, circular 574 Floor Trunking 497 Flue Supports 263 Flue System Fittings 261 Flue Systems domestic 259

675

domestic/small commercial 265 flashings & terminals 264 Fluorescent Luminaires batten type, surface mounted 564 surface mounted, opal diffuser 564 Flush Floor Trunking four compartment, galvanised steel 501 triple compartment, galvanised steel 501 Flush Floor Trunking Fittings 501 FP100, 450/750 volt grade, single core 530 FP200 300/500 volt grade, 2 core 531 300/500 volt grade, 3 core 531 300/500 volt grade, 4 core 531 Frames, floor standing,, vertical cable management 592 Fuel Cells System 21 benefits, types 22 cost comparison 25 markets, cost comparison 23 typical current project cost 24 Fused Switches Heavy Duty 561 Galvanised, heavy gauge, screwed drawn steel 496 Galvanised Steel Trunking 498 Gang rates ductwork 133 electrical 487 mechanical 131 Gas Booster Sets 242 Gas Fire Engine 491 Gauges, temperature and pressure 305 Generating Sets, standby diesel 91 Generators, standby 490 Getting Connection competition 34 costs 35 design 33 network reinforcement 34 planning 33 Glanding off, terminations 531 Grey Water Recycling 11 Grilles air diffusion, plastic 443 exhaust, aluminium 441 floor 441 supply, rectangular 438 Ground Source Heat Pumps 8 Ground Water Cooling 15

676

GRP Cable Tray 550 GRP Tanks 231 Gutter Fittings, adaptors, angles, stop end, outlets 135 Gutters, cast iron 142 Hangers and Brackets fabricated 246 galvanised steel 362 Heads, rainwater 139 flat 154 Heat Emitters fan convectors 316 perimeter heaters 313 radiant strip heaters 313 radiators flat panel 315 pressed steel 313 trench heating 317 under floor heating 319 unit heaters 352 Heat Exchangers CHW 363 LTHW 312 Heat Pumps 16 Heat Rejection 356 air cooled condensers 357 all-in-rates 85 cooling towers 358 dry air liquid coolers 356 Heater Batteries, local heating units 352 Heaters for Hot Water 238 Heavy Duty Fuse Switches, with HRC fuses 561 Heavy Fittings, galvanised steel 219 Heavy Flexible Cable 450/750 volt grade, 2 core 526 450/750 volt grade, 3 core 526 450/750 volt grade, 4 core 526 High Impact PVC Heavy Gauge, standard pattern boxes & fittings 496 High Impact PVC Light gauge, standard pattern boxes & fittings 496 High/Low Bay Luminaires compact discharge, aluminium reflector 566 corrosion resistant GRP body, acrylic diffuser 566 flame proof, aluminium body 566 sealed discharge, aluminium reflector 566 Hoists, plant hire 636

Index

Horizontal Bend double compartment, zinc coated underfloor ducting 507 triple compartment, zinc coated underfloor ducting 507 Hose Reels all-in-rates 87 automatic; rubber, manual; rubber 244 Hospitals elemental cost 114 RIBA Stage A Feasibility Cost 74 Hotels elemental cost 112 RIBA Stage A Feasibility Cost 77 RIBA Stage C Feasibility Cost 82 HRC Fused Distribution Boards, IP4X external protection enclosure 559 HV Cables, high voltage 492 HV Circuit Breaker, 3 phase, 11kV 494 HV Intakes 1000Kva to 6000Kva, schematic 43 Industrial Angled Sockets splash proof, 100–130A, surface mounted 577 splash proof, 200–250A, surface mounted 578 water tight, 100–130A, surface mounted 577 water tight, 200–250A 579 Industrial Connectors splash proof, 100–130A 576 splash proof, 200–250A 578 water tight, 100–130A 577 water tight, 200–250A 579 Industrial Plugs splash proof, 100–130A 576 splash proof, 200–250A 577 water tight, 100–130A 577 water tight, 200–250A 578 Inlet Boxes, steel dry riser 245 Insulations ductwork – all types/finishes 456 mineral fibre for pipes, concealed 320 pipes – closed cell 233 Internal Coupling, PVC trunking 503 intruder detection system (IDS), schematic 43 Inverter, AC static to luminaires 584 IP54 Protection, mains busbar 536 Isolating Switches 561 IT / Data, all-in-rates 87

Index

JIB (Joint Industry board) 489 JIB Apprentice Training Scheme Rate of Wages London rate, rates with transport provided 620 national standard rate, rates with transport provided 620 JIB Rates of Wages London rate, rates with transport provided 620 national standard rate, rates with transport provided 620 Jointing Sleeve, PVC underfloor trunking 506 Junction Box four compartment, galvanised steel 501 triple compartment, galvanised steel 501 Junction/Terminal Box double compartment, zinc coated underfloor ducting 507 triple compartment, zinc coated underfloor ducting 507 Labour Rates ductwork 131 electrical 487 mechanical 131 Ladder Racks extra heavy duty galvanised steel 542 heavy duty galvanised steel 541 light duty galvanised steel 540 Lamp, T8 564 Leak Detection 365 Leisure Centres, RIBA Stage A Feasibility Cost 75 Lifts all-in-rates 95 good lifts 98 machine room above 95 machine room less 97 Lighting, all-in-rates 93 Lighting Busbar, pre-wired busbar, plug in trunking for lighting 539 Lighting Controls cable, aluminium sheathed 570 lighting control modules 571 presence detectors 571 scene switch plate 571 Lighting Switches 568 Lighting Track single circuit, 25A 2 P567 three circuit, 25A 2 P567

677

Lightning Protection air rods 604 air terminals 605 bonds and clamps 605 conductor tape 604 earth pits 606 earth rods 606 surge protection 607 Local Planning and Building Regulations 7 Location Factors 71 Lock Equipment 598 Lodging Allowances, nightly rate 615 Louvres acoustic 447 weather 448 Low Impedance Busbar Trunking, straight copper busbar 536 Low Temp’ Hot Water Pipes extra for black malleable fittings 274 extra over black steel pipes 272 mech’ grooved steel pipe, fittings 289 plastic (polypropylene) pipe 290 fittings 290 press fit carbon steel pipe 288 fittings 288 screwed BS 1387 steel pipe 268 fittings 269 flanges 272 welded BS 1387 steel pipe 279 fittings 282 flanges 280 welded carbon steel 285 fittings 288 flanges 287 Low Velocity Air Cconditioning, air handling units, supply 476 Low Velocity Air Conditioning, air handling units, supply and extract 476 Luminaires batten 564 bulkhead, 60 watt 566 ceiling recessed asymmetric 564 downlighters 566 emergency 582 external 566 high/low bay 566 surface fluorescent 564 suspended fluorescent 564 wall mounted fluorescent 565 LV Intakes up to 1000Kva, schematic 43

678

Index

LV Switchboard Busbar, copper busbar 555 LV Switchgear all-in-rates 91 distribution boards 553

MCCB 45 kA fault rated 555 MCCB 70 kA fault rated 555 MCCB 150 kA fault rated 554 MRL (Machine Room less) Lift, all-in-rates 95

Machine room above (MRA) Lift 95 Mains Busbar 536 Major Projects Agreement, employee categories, hourly rate comparisons 617 Malleable Iron Fittings, galvanised steel 220 Manifold Connector, cast iron 176 Manual Call Points 600 Master Distribution Box 6 port, steel 533 9 port, steel 533 Materials Rates, gang rates, electrical 487 MCB Distribution Boards, IP3X external protection enclosure 558 MCCB Panel Boards 557 MCCB Panelboards feeder MCCBs 558 panelboards 557 Mechanical Installations, material cost 127 Mechanical Rates of Wages 612 Medium Density Polyethylene MDPE (Blue) 203 compression fittings 205 electro fusion fittings 204 MDPE (yellow), gas 239 compression fittings 239 electro fusion fittings 239 Metal Clad Cable BSEN 60439 533 data cable 533 Meters, energy, ultrasonic, electromagnetic 366 Meters Energy CHW 366 LTHW, ultrasonic 320 MIDEL Transformer, gasket-sealed steel tank 495 Miniature Circuit Breakers, For distribution boards 559 Modular Recessed, T8 lamp 565 Modular Recessed Compact Fluorescent, TCL lamp 565 Modular Recessed, Linear Fluorescent, high frequency control gear 564 Modular Wiring 533 Moulded Case Circuit Breakers MCCB 36 kA fault rated 555

networked lighting control system, schematic 43 Nipple, capillary fittings 187 Non-Standard Socket Outlet, 13A, separate clean earth terminal, galvanised steel box 573 Office building, elemental cost 105 Offices 73 RIBA Stage C Feasibility Cost 80 Offset, mains busbar 537 Ogee Gutters, PVC-U 138 Open Loop System 15 Outlet Boxes, steel dry riser 245 Outlets rainwater 137 roof 141 small power 572 Overflow, bath 162 P-traps 173 Packaged Steam Boilers, gas/oil fired 267 Part L Building Regulations 3 Passenger lifts, all-in-rates 95 Patch Panels 19” wide, finished in black 593 voice 19” wide, finished in black 588 Performing Arts, elemental cost 109 Performing Arts Centre, RIBA Stage A Feasibility Cost 75 Photovoltaic (PV) 8 Photovoltaic Building Integrated (BIPV) 8 Pipe Clips copper pipes (CHW) 362 galvanised steel, plastic coated steel 163 metal fixing 158 Pipe Freezing, carbon steel, copper 319 Pipe in Pipe (Gas) 240 Pipeline Fittings, steel pipes 246 Pipes ABS waste 158 water 207 all-in-rates 85 black steel 279 screwed chilled water 361

Index

screwed LTHW 268 welded chilled water 361 welded LTHW 279 black steel screwed, gas 240 carbon steel 285 cast iron 151 soil EPDM rubber joints 173 copper, cold water 181 copper (plastic coated) 241 capillary fittings 241 galvanised steel 213 galvanised steel, heavy 213 galvanised steel, medium 213 low temp’ hot water extra for black malleable fittings 274 extra over black steel pipes 272 mech’ grooved steel pipe 289 plastic (polypropylene) pipe 290 press fit carbon steel pipe 288 screwed BS 1387 steel pipe 268 welded BS 1387 steel pipe 279 welded carbon steel 285 MDPE blue 203 yellow 239 MDPE (yellow), gas compression fittings 239 electro fusion fittings 239 mechanical grooved 289 MuPVC, plastic 155 polypropylene for LTHW 290 thermally fused joints 290 prefabricated black steel 246 press fit 288 carbon steel 288 stainless steel 202 PVC-C for cold water 212 PVC-U dry push fit joints 138 solvent welded joints 141 sprinkler, victaulic 248 stainless Steel 198 steel welded 241 Pipes Black Steel, sprinkler pipes & fittings, welded 246 PIR, access control 598 Plant Charges 633 Plant Hire Costs compaction equipment 639 concrete equipment 639

679

construction vehicles 637 excavators & loaders 638 hoists 636 lifting appliances and conveyors 634 pumps 634 scaffolding, shoring & fencing 634 site accommodation 640 site equipment 641 small tools 643 testing equipment 639 Plastic Ductwork, circular 378 Plug for Weatherproof socket outlet, protected to IP66 573 Plumbers Welding Supplement 618 Polypropylene, pipes, push fit joints 160 Power Factor Correction 556 Power Pole, aluminium painted 574 Power Post, aluminium painted, UPVC 574 Pressure Reducing Valves (PRV), steam 351 Pressurisation Units CHW 364 LTHW 306 Pumps accelerator 311 all-in-rates 86 belt drive – CHW & LTHW 307 circulator 311 close coupled 309 glandless – domestic 310 pressurisation – cold water 229 sump 229 twin head belt drive 308 variable speed 309 Push Button Stations, heavy gauge pressed steel, polycarbonate cover 562 PV Photovoltaic 8 PVC Bench Trunking, white / grey finish 505 PVC Fittings, PVC-u (cold water) 210 PVC Miniature Trunking compartmented, white finish 505 single compartment, white finish 505 PVC Miniature Trunking Fittings 505 PVC Underfloor Trunking, single compartment 506 PVC-C, PVC-u (cold water) 212 Radio Frequency Cable, PVC sheathed, laid loose 589 Rain Water Harvesting 11 Rates and Wages 619

680

Rates of wages hourly rates of wages, heating, ventilation 612 hourly rates of wages, main grades, plumbing, mechanical 616 mechanical 612 plumbing 617 trainee hourly rates of pay 613 RCD Protected Socket Outlet, 13A, galvanised steel box 573 Recessed Downlighter, reflector with white/ chrome bezel 566 Regional Variations 71 Renewable Energy 7 Renewable Energy Options biomass boilers 8 borehole cooling 8 building integrated photovoltaic (BIPV) 8 combined heat and power (CHP) 8 ground source heat pumps 8 investment yield table 8 solar water heating 8 wind generators 8 Residential affordable, elemental cost 117 Residential Buildings, RIBA Stage C Feasibility Cost 84 Residential Private, elemental cost 119 Residual Current Circuit Breakers, For distribution boards 559 Responsibility Allowance hourly rates of wages, Craftsmen 613 hourly rates of wages, senior craftsmen 613 weekly rates of credit 622 Retail, RIBA Stage A Feasibility Cost 75 reverse cycle heat pump, schematic 43 RIBA Stage A Feasibility Cost 73 commercial research 76 day care unit 74 distribution centres 73 factories 73 health and welfare facilities 74 hospitals 74 hotels 77 office buildings 73 recreation buildings 75 retail buildings 75 schools 76 supermarkets 76 warehouses 73 RIBA Stage C Feasibility Cost

Index

hotels 82 offices 78 residential 84 Ring Main Unit, 3 phase, 11kV, 630A 494 Rising Bend double compartment, zinc coated underfloor ducting 507 four compartment, galvanised steel 501 triple compartment galvanised steel 501 zinc coated underfloor ducting 507 Rising Mains Busbar, straight aluminium bar 538 Roof Outlets, PVC-U 141 Roof Vent Connector 177 Roses, ceiling 570 Scaffolding, plant hire 634 School, elemental cost 116 Scientific Buildings, RIBA Stage A Feasibility Cost 76 Semi Recessed Linear Fluorescent, T5 lamp 565 Service Outlet Module 3 compartment 502 4 compartment 502 Shaver Sockets 250 voltage supply, white moulded plastic 575 dual voltage supply, white moulded plastic 575 Sheet Steel Adaptable Boxes black rectangular pattern 510 black square pattern 509 galvanised rectangular pattern 510 galvanised square pattern 510 Shell and Core, elemental cost 117 Shopping Malls elemental cost 103 RIBA Stage A Feasibility Cost 75 Single Compartment PVC Trunking, grey finish, clip on lid 502 Single Compartment PVC Trunking Fittings 502 Single Compartment Trunking, jointed with standard connectors, galvanised steel 497 Small Power, all-in-rates 92 Socket Outlet switched, 13A metal clad, 1 & 2 gang 572 unswitched, 13A metal clad, 1 & 2 gang 572 Socket Plate, PVC bench trunking 506

Index

Socket Reducer, PVC underfloor trunking 506 Soil and Waste Pipes cast iron pipes, rubber gasket joints 170 PVC-U 167 Solar Water Heating 8 Sounders 600 Split Systems, for heating & cooling 367 Splitters, 5 Wire 535 Sports Hall elemental cost 111 RIBA Stage A Feasibility Cost 75 Sprinkler Alarms/Gongs 249 Sprinkler Fixings 246 Sprinkler Heads 249 Sprinkler Systems, all-in-rates 87 Sprinkler Tanks 250 Sprinkler Valves 249 Stadium, elemental cost 113 Stage A RIBA 73 Stage C RIBA 78 Stainless Fittings, compression fittings 201 Stainless Steel Pipes 198 capillary fittings 199 press fit fittings 198 Standby Generators 490 standby power system, schematic 43 static UPS System, schematic 43 Steam Strainers 349 Steam Traps cast iron 349 stainless steel 349 Stop End double compartment, zinc coated underfloor ducting 507 four compartment, galvanised steel 501 galvanised steel 498 PVC bench trunking 505 PVC miniature trunking 505 PVC trunking 503 triple compartment galvanised steel 501 zinc coated underfloor ducting 507 Stopcocks, copper 227 Strainers 302 steam 349 Supermarkets elemental cost 121 RIBA Stage A Feasibility Cost 76 Support, cast iron, pipe spacer 151 Supports and Brackets, ductile iron, mild steel 174

681

Surface Mounted, Linear Fluorescent, T8 lamp 564 Surveillance Equipment 599 all-in-rates 87 Suspended Linear Fluorescent, T5 lamp 565 Sustainability Technology 7 Switch Disconnectors 562 moulded plastic enclosure 576 steel sheet case 561 Switched Modules, armoured cable 535 Switches 6A modular type switch 568 galvanised steel box, 1 way 568 galvanised steel box, 2 way, 568 6A, watertight switch 569 10A, splash proof moulded switch 569 15A, watertight switch 569 architrave plate switch, 6A, white plastic 569 ceiling switch, white moulded plastic 569 plate switch, 6A flush mounted, white plastic 569 plate switch, 10A flush mounted, white plastic 568 Switches/ Sensors, pressure devices 608 Switches/Sensors, temperature devices 608 Switchgear, HV 494 Synchronisation Panels (for generators) 490 T Connectors, snap fix 534 Tanks, overflow 162 Tanks and Cisterns cold water storage tanks sectional GRP 231 sectional steel 230 fuel oil storage tanks; steel, fuel storage tanks; plastic 243 moulded glass fibre cisterns 230 polypropylene cisterns 230 sprinkler tanks sectional GRP 250 sectional steel 250 Tap Off, mains busbar 537 Tap-Off Units lighting busbar 539 rising mains busbar 539 Tee, Flat Cover, PVC trunking 504 Tee, Internal/External Cover, PVC trunking 504 Tees double compartment, galvanised steel 500 PVC miniature trunking 505

682

single compartment, galvanised steel 500 triple compartment, galvanised steel 500 Telecommunications Cables, multipair internal telephone cable Installed in conduit/Trunking 587 laid on tray/basket 587 Telephone Outlet bronze or satin chromeplate and box 588 moulded plastic plate and box 588 Television Aerial Cable, coaxial, PVC sheathed 589 Terminal Strips, 20A high density polythene 497 Terminations 600/1000 volt grade, 2 core, galvanised steel wire armour 515, 521 600/1000 volt grade, 3 core, galvanised steel wire armour 515, 522 600/1000 volt grade, 4 core, galvanised steel wire armour 516, 522 600/1000 volt grade, 7 core, galvanised steel wire armour 516, 522 600/1000 volt grade, 12 core, galvanised steel wire armour 516, 522 600/1000 volt grade, 19 core, galvanised steel wire armour 516, 523 600/1000 volt grade, 27 core, galvanised steel wire armour 517, 523 600/1000 volt grade, 37 core, galvanised steel wire armour 517, 523 600/1000 volt grade, single core, aluminium wire armour 515, 521 glanding off 2 core 531 3 core 531 4 core 531 high voltage 492 Terminations,, Glanding off 2 core 532 3 core 532 4 core 532 Thermal Insulation ductwork 457 extra over concealed insulation fittings 320 extra over external insulation fittings 337 mineral fibre for pipes external 337 plant room 326 pipes – closed cell 233 plant room insulation fittings 326 Thermostat, room thermostats 346

Index

Thermostats 346 Top Feeder Unit, rising mains busbar 538 Trace Heating System 363 Transfer Switches 556 Transformer HV 494 oil filled, free breathing tank 495 Transformers cast resin air natural 495 temperature controlled fans 495 gasket-sealed steel tank 495 MIDEL 495 step down 495 Traps, polypropylene 161 Travelling & Time Allowances London rate, daily travelling allowance 621 national standard rate, daily travelling allowance 621 Tray GRP 550 heavy duty galvanised steel, BS729 548 light duty galvanised steel, BS729 544 medium duty galvanised steel, BS729 546 mild steel cable basket, zinc plated 551 Trench heating, natural convection type 317 Triple Compartment Trunking, jointed with standard connectors, galvanised steel 498 Tripping Batteries, battery chargers, valve regulated lead acid battery 494 Trunking 497 bends 90° double compartment 499 single compartment 499 triple compartment 499 black enamelled, heavy gauge, 496 body coupler, 3 and 4 compartment, 502 crossovers double compartment 501 single compartment 500 triple compartment 501 dado/skirting 507 double compartment, jointed with standard connectors 497 flanged connector, galvanised steel 499 flexible conduits, metallic, PVC covered conduit 496 floor 501 flush floor, triple compartment 501 galvanised, heavy gauge, 496

Index

galvanised steel 498, 501 high Impact PVC heavy Gauge, standard pattern boxes & fittings 496 high Impact PVC light gauge, standard pattern boxes & fittings 496 junction box four compartment 501 triple compartment 501 PVC 502 rising bend four compartment 501 triple compartment 501 service outlet module 3 compartment 502 4 compartment 502 stop end four compartment 501 galvanised steel 498 triple compartment 501 tees double compartment 500 single compartment 500 triple compartment 500 triple compartment, jointed with standard connectors 498 underfloor 506 Tubular Fittings, galvanised steel 218 TV Socket Outlet, moulded plastic box, flush/ surface mounted 590 Typical Engineering Details cost information 44 cost information w/ reinforcement 45 cost information w/ substation reinforcement 46 urban network underground 44 urban network underground w/ reinforcement 45 urban network underground w/ substation reinforcement 46 Typical Schematic, engineering details 43 Un-Armoured Cable 523 Underfloor Busbar, pre-wired busbar, plug in trunking for power 540 Underfloor Ducting double compartment 507 fittings 507 triple compartment 507 Underfloor heating 319 Uninterruptible Power Supply

683

integral diesel rotary, 3 phase 581 large size static, 3 phase, 10 year battery 580 medium size static, 1 phase, 10 year battery 580 medium size static, 3 phase, 10 year battery 580 single phase, 5 year battery, standard 13A socket outlet 580 UPS 580 urban network Mainly Underground, schematic 43 urban network with reinforcement, schematic 43 urban network with substation reinforcement, schematic 43 Valve ancillaries, steam heating system 349 Valves automatic air vent 304 ball float valves 225 ball valves 297 bronze/gunmetal inlet 245 check valves 299 check valves – DZR 228 cocks 226, 304 commissioning valves 300 control valves 303 gate valve – DZR 227 gate valves – DZR 296 gates 226 glove valves 298 isolating 296 pressure reducing 351 radiator valves 306 regulators 302 safety and relief valves 303, 351 stopcocks 226, 304 strainers 349 variable air volume (VAV), schematic 43 variable refrigerant volume (VRV), schematic 43 VAV – Variable Air Vol’ System, terminal units 479 Vertical Access Box, 2 Compartment, PVC underfloor trunking 506 Vertical Multi Compartment Pillar, UPVC 574 Vertical Transport, all-in-rates 95 Video Cable, PVC flame retardant sheathed, laid loose 590 VRF Units, refrigerant 367

684

Wages, hourly rates of wages 612 Wall Mounted Compact Fluorescent, TCL lamp 565 Wall Spacer, cast iron 174 Warehouses 73 Water Heater (Electric) 238 Water Heater Switch, switched with neon indicator 575 Water Installations, all-in-rates 85 Water Treatment 232

Index

Weatherproof Junction Boxes glassfibre reinforced polycarbonate 563 sheet steel with zinc spray finish 563 Weekly Holiday Credit & Welfare Contribution employee grades of entitlement 614 rates 614 Weekly Holiday Credit Contributions 618 Wind Generators 8 Work Station, data outlet 594

Software and eBook Single-User Licence Agreement We welcome you as a user of this Spon Price Book Software and eBook and hope that you find it a useful and valuable tool. Please read this document carefully. This is a legal agreement between you (hereinafter referred to as the “Licensee”) and Taylor and Francis Books Ltd. (the “Publisher”), which defines the terms under which you may use the Product. By breaking the seal and opening the document inside the back cover of the book containing the access code you agree to these terms and conditions outlined herein. If you do not agree to these terms you must return the Product to your supplier intact, with the seal on the document unbroken. 1.

1.1 1.2 1.3 1.4 2. 2.1 2.2 2.3

Definition of the Product The product which is the subject of this Agreement, Spon’s Mechanical and Electrical Services Price Book 2010 Software and eBook (the “Product”) consists of: Underlying data comprised in the product (the “Data”) A compilation of the Data (the “Database”) Software (the “Software”) for accessing and using the Database An electronic book containing the data in the price book (the “eBook”) Commencement and licence This Agreement commences upon the breaking open of the document containing the access code by the Licensee (the “Commencement Date”). This is a licence agreement (the “Agreement”) for the use of the Product by the Licensee, and not an agreement for sale. The Publisher licenses the Licensee on a non-exclusive and non-transferable basis to use the Product on condition that the Licensee complies with this Agreement. The Licensee acknowledges that it is only permitted to use the Product in accordance with this Agreement.

3.

Multiple use For more than one user or for a wide area network or consortium, use is only permissible with the purchase from the Publisher of a multiple-user licence and adherence to the terms and conditions of that licence.

4. 4.1

4.4

Installation and Use The Licensee may provide access to the Product for individual study in the following manner: The Licensee may install the Product on a secure local area network on a single site for use by one user. The Licensee shall be responsible for installing the Product and for the effectiveness of such installation. Text from the Product may be incorporated in a coursepack. Such use is only permissible with the express permission of the Publisher in writing and requires the payment of the appropriate fee as specified by the Publisher and signature of a separate licence agreement. The Product is a free addition to the book and no technical support will be provided.

5.

Permitted Activities

5.1

The Licensee shall be entitled: 5.1.1 to use the Product for its own internal purposes; 5.1.2 to download onto electronic, magnetic, optical or similar storage medium reasonable portions of the Database provided that the purpose of the Licensee is to undertake internal research or study and provided that such storage is temporary; The Licensee acknowledges that its rights to use the Product are strictly set out in this Agreement, and all other uses (whether expressly mentioned in Clause 6 below or not) are prohibited.

4.2 4.3

5.2 6. 6.1 6.2 6.3 6.4 6.5 6.6 6.7

Prohibited Activities The following are prohibited without the express permission of the Publisher: The commercial exploitation of any part of the Product. The rental, loan, (free or for money or money’s worth) or hire purchase of this product, save with the express consent of the Publisher. Any activity which raises the reasonable prospect of impeding the Publisher’s ability or opportunities to market the Product. Any networking, physical or electronic distribution or dissemination of the product save as expressly permitted by this Agreement. Any reverse engineering, decompilation, disassembly or other alteration of the Product save in accordance with applicable national laws. The right to create any derivative product or service from the Product save as expressly provided for in this Agreement. Any alteration, amendment, modification or deletion from the Product, whether for the purposes of error correction or otherwise.

7. 7.1 7.2 7.3 7.4

8. 8.1 8.2

8.3 8.4

8.5 8.6 8.7

8.8

8.9

9. 9.1 9.2 9.3

9.4

General Responsibilities of the License The Licensee will take all reasonable steps to ensure that the Product is used in accordance with the terms and conditions of this Agreement. The Licensee acknowledges that damages may not be a sufficient remedy for the Publisher in the event of breach of this Agreement by the Licensee, and that an injunction may be appropriate. The Licensee undertakes to keep the Product safe and to use its best endeavours to ensure that the product does not fall into the hands of third parties, whether as a result of theft or otherwise. Where information of a confidential nature relating to the product of the business affairs of the Publisher comes into the possession of the Licensee pursuant to this Agreement (or otherwise), the Licensee agrees to use such information solely for the purposes of this Agreement, and under no circumstances to disclose any element of the information to any third party save strictly as permitted under this Agreement. For the avoidance of doubt, the Licensee’s obligations under this sub-clause 7.4 shall survive the termination of this Agreement. Warrant and Liability The Publisher warrants that it has the authority to enter into this agreement and that it has secured all rights and permissions necessary to enable the Licensee to use the Product in accordance with this Agreement. The Publisher warrants that the Product as supplied on the Commencement Date shall be free of defects in materials and workmanship, and undertakes to replace any defective Product within 28 days of notice of such defect being received provided such notice is received within 30 days of such supply. As an alternative to replacement, the Publisher agrees fully to refund the Licensee in such circumstances, if the Licensee so requests, provided that the Licensee returns this copy of Spon’s Mechanical and Electrical Services Price Book 2010 to the Publisher. The provisions of this sub-clause 8.2 do not apply where the defect results from an accident or from misuse of the product by the Licensee. Sub-clause 8.2 sets out the sole and exclusive remedy of the Licensee in relation to defects in the Product. The Publisher and the Licensee acknowledge that the Publisher supplies the Product on an “as is” basis. The Publisher gives no warranties: 8.4.1 that the Product satisfies the individual requirements of the Licensee; or 8.4.2 that the Product is otherwise fit for the Licensee’s purpose; or 8.4.3 that the Data are accurate or complete or free of errors or omissions; or 8.4.4 that the Product is compatible with the Licensee’s hardware equipment and software operating environment. The Publisher hereby disclaims all warranties and conditions, express or implied, which are not stated above. Nothing in this Clause 8 limits the Publisher’s liability to the Licensee in the event of death or personal injury resulting from the Publisher’s negligence. The Publisher hereby excludes liability for loss of revenue, reputation, business, profits, or for indirect or consequential losses, irrespective of whether the Publisher was advised by the Licensee of the potential of such losses. The Licensee acknowledges the merit of independently verifying Data prior to taking any decisions of material significance (commercial or otherwise) based on such data. It is agreed that the Publisher shall not be liable for any losses which result from the Licensee placing reliance on the Data or on the Database, under any circumstances. Subject to sub-clause 8.6 above, the Publisher’s liability under this Agreement shall be limited to the purchase price. Intellectual Property Rights Nothing in this Agreement affects the ownership of copyright or other intellectual property rights in the Data, the Database of the Software. The Licensee agrees to display the Publishers’ copyright notice in the manner described in the Product. The Licensee hereby agrees to abide by copyright and similar notice requirements required by the Publisher, details of which are as follows: “© 2010 Taylor & Francis. All rights reserved. All materials in Spon’s Mechanical and Electrical Services Price Book 2010 are copyright protected. All rights reserved. No such materials may be used, displayed, modified, adapted, distributed, transmitted, transferred, published or otherwise reproduced in any form or by any means now or hereafter developed other than strictly in accordance with the terms of the licence agreement enclosed with Spon’s Mechanical and Electrical Services Price Book 2010. However, text and images may be printed and copied for research and private study within the preset program limitations. Please note the copyright notice above, and that any text or images printed or copied must credit the source.” This Product contains material proprietary to and copyedited by the Publisher and others. Except for the licence granted herein, all rights, title and interest in the Product, in all languages, formats and media

throughout the world, including copyrights therein, are and remain the property of the Publisher or other copyright holders identified in the Product. 10.

Non-assignment This Agreement and the licence contained within it may not be assigned to any other person or entity without the written consent of the Publisher.

11. 11.1

Termination and Consequences of Termination. The Publisher shall have the right to terminate this Agreement if: 11.1.1 the Licensee is in material breach of this Agreement and fails to remedy such breach (where capable of remedy) within 14 days of a written notice from the Publisher requiring it to do so; or 11.1.2 the Licensee becomes insolvent, becomes subject to receivership, liquidation or similar external administration; or 11.1.3 the Licensee ceases to operate in business. The Licensee shall have the right to terminate this Agreement for any reason upon two month’s written notice. The Licensee shall not be entitled to any refund for payments made under this Agreement prior to termination under this sub-clause 11.2. Termination by either of the parties is without prejudice to any other rights or remedies under the general law to which they may be entitled, or which survive such termination (including rights of the Publisher under subclause 7.4 above). Upon termination of this Agreement, or expiry of its terms, the Licensee must destroy all copies and any back up copies of the product or part thereof.

11.2

11.3

11.4

12. 12.1

12.2

12.3

12.4

12.5

12.6 12.7

12.8

General Compliance with export provisions The Publisher hereby agrees to comply fully with all relevant export laws and regulations of the United Kingdom to ensure that the Product is not exported, directly or indirectly, in violation of English law. Force majeure The parties accept no responsibility for breaches of this Agreement occurring as a result of circumstances beyond their control. No waiver Any failure or delay by either party to exercise or enforce any right conferred by this Agreement shall not be deemed to be a waiver of such right. Entire agreement This Agreement represents the entire agreement between the Publisher and the Licensee concerning the Product. The terms of this Agreement supersede all prior purchase orders, written terms and conditions, written or verbal representations, advertising or statements relating in any way to the Product. Severability If any provision of this Agreement is found to be invalid or unenforceable by a court of law of competent jurisdiction, such a finding shall not affect the other provisions of this Agreement and all provisions of this Agreement unaffected by such a finding shall remain in full force and effect. Variations This agreement may only be varied in writing by means of variation signed in writing by both parties. Notices All notices to be delivered to: Spon’s Price Books, Taylor & Francis Books Ltd., 2 Park Square, Milton Park, Abingdon, Oxfordshire, OX14 4RN, UK. Governing law This Agreement is governed by English law and the parties hereby agree that any dispute arising under this Agreement shall be subject to the jurisdiction of the English courts.

If you have any queries about the terms of this licence, please contact: Spon’s Price Books Taylor & Francis Books Ltd. 2 Park Square, Milton Park, Abingdon, Oxfordshire, OX14 4RN Tel: +44 (0) 20 7017 6672 Fax: +44 (0) 20 7017 6702 www.tandfbuiltenvironment.com

Multiple-user use of the Spon Press Software and eBook To buy a licence to install your Spon Press Price Book Software and eBook on a secure local area network or a wide area network, and for the supply of network key files, for an agreed number of users please contact: Spon’s Price Books Taylor & Francis Books Ltd. 2 Park Square, Milton Park, Abingdon, Oxfordshire, OX14 4RN Tel: +44 (0) 207 017 6672 Fax: +44 (0) 207 017 6072 www.pricebooks.co.uk Number of users

Licence cost

2–5

£450

6–10

£915

11–20

£1400

21–30

£2150

31–50

£4200

51–75

£5900

76–100

£7100

Over 100

Please contact Spon for details