•U , \J V
u
K 1 9 , 21 2,21
^0 i
27 27 27
30. 30. 30.
17
0 0 0
•"}
Q
"7
3 3
2,23 c , d
3
7n n
1 7 I
i
OU.
U
3
Proceedings of the Infernofionol Conference on ScienMfic & Engineering Computation [IC-SEC] 2002 3 P
"7
2
Editors
H. R Lee K. Kumar ?! 8*
Imperial College Press — -
Proceedings of tlie International Conference on ScienfipcftEngineering Computation [IC-SEC] 3002
liunhuinhy
ins in
oiiuiiil klMP ui i ini e IK ir y o oil
This page is intentionally left blank
Proceedings of Ihe International Conference on Scientific & Engineering Computation [IC-SEC] EDOB
Recent Rdvanc cienc Co 00 I 3 - 5 December 2002
Raffles City Convention Centre, Singapore
Editors
H. R Lee & K. Kumar (Institute of High Performance Computing, Singapore)
Co-Organisers:
1
IMUS
Institute of High Performance Computing
National University of Singapore
In Cooperation With:
CDGC The 5uporcomputing People
siHJTL
^AM
Imperial College Press
Published by Imperial College Press 57 Shelton Street Covent Garden London WC2H 9HE Distributed by World Scientific Publishing Co. Pte: Ltd. 5 Toh Tuck Link, Singapore 596224 USA office: Suite 202,1060 Main Street, River Edge, NJ 07661 UK office: 57 Shelton Street, Covent Garden, London WC2H 9HE
British Library Cataloguing-in-Publication Data A catalogue record for this book is available from the British Library.
RECENT ADVANCES IN COMPUTATIONAL SCIENCE AND ENGINEERING Proceedings of the International Conference on Scientific and Engineering Computation (IC-SEC) 2002 Copyright © 2002 by Imperial College Press All rights reserved. This book, or parts thereof, may not be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage and retrieval system now known or to be invented, without written permission from the Publisher.
For photocopying of material in this volume, please pay a copying fee through the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, USA. In this case permission to photocopy is not required from the publisher.
ISBN
1-86094-345-4 (pbk)
Printed by Fulsland Offset Printing (S) Pte Ltd, Singapore
INTERNATIONAL CONFERENCE ON SCIENTIFIC & ENGINEERING COMPUTATION (IC-SEC) 2002 Recent Advances in Computational Science & Engineering The inaugural IC-SEC 2002 is jointly organised by the Institute of High Performance Computing (IHPC), the Faculty of Engineering and Faculty of Science, and Institute for Mathematical Sciences of the National University of Singapore (NUS). The conference is also organised in cooperation with the Australian and New Zealand Industrial and Applied Mathematics (ANIZAM), Centre for Development of Advanced Computing (CDAC), Society for Industrial and Applied Mathematics (SIAM), and Theoretical and the Applied Mechanics Society - Singapore (SingTAM). IC-SEC 2002 aims to create a forum for engineers and scientists who are involved in the use of high performance computers, advanced numerical strategies, computational methods and simulation in various scientific and engineering disciplines. The conference offers participants a platform to present and discuss latest trends and findings or simply to learn about the state-of-the-art in their particular field(s) of interest. The conference also hopes to provide a forum for the interdisciplinary blending of computational efforts in various diversified areas of sciences such as biology, chemistry, physics and materials and all branches of engineering. The technical committee has therefore devised a broad range of topics and application areas surrounding the theme of this conference, all of which involves modelling and simulation work using high performance computers. Conference Topics and Application Areas MEMS Modelling & Simulation Computational Acoustics Computational Fluid Dynamics Computational Solid and Structural Mechanics Computational Electromagnetics Computational Electronics Computational Chemistry Computational Materials Science Computational Nano-Science Defence Modelling & Simulation Grid Computing & Applications Scientific Visualisation Fast Algorithms Parallel & Distributed Computing V
This page is intentionally left blank
Conference Committee Conference Chair Lam Khin Yong, Institute of High Performance Computing / National University of Singapore, Singapore Conference Co-Chairs Barbara Lee Keyfitz, University of Houston, USA Lee Seng Luan, National University of Singapore, Singapore Nhan Phan-Thien, National University of Singapore, Singapore International Scientific Advisory Members Francine D. Berman, University of California, San Diego, USA Rajkumar Buyya, Distributed Systems Engineering Lab, University of Melbourne, Australia Louis Chen, National University of Singapore, Singapore Chew Weng Cho, University of Illinois, Urbana-Champaign, USA Carolina Cruz-Neira, Iowa State University, USA David Ferry, Arizona State University, USA Gao Beng Qing, Beijing Institute of Technology, China Tony Hey, University of Southampton, UK Marc Ingber, University of New Mexico, USA Christian Joachim, Centre National De La Recherche Scientifique, France Carl Kesselman, Information Sciences Institute, The University of South California, USA Sangtae Kim, Lily Research Laboratories, USA S. Kitipomchai, City University of Hong Kong, Hong Kong, China Leo W M Lau, Chinese University of Hong Kong, Hong Kong, China Liu Wing Kam, Northwestern University, USA Mark S Lundstrom, Purdue University, USA Max G Q Lu, University of Queensland, Australia Kwan-Liu Ma, University of California, Davis, USA Shaker A Meguid, University of Toronto, Canada Eugenio Onate, International Centre for Numerical Methods in Engineering, Spain D R J Owen, University of Swansea, UK Maurice Petyt, Institute of Sound and Vibration Research, UK Ken Powell, University of Michigan, USA Sharad Purohit, Centre for Development of Advanced Computing, India J N Reddy, Texas A & M University, USA Dennis Salahub, Steacie Institute for Molecular Sciences, Canada William R. Schowalter, University of Illinois, Chicago, USA Satoshi Sekiguchi, National Institute of Advanced Industrial Science and Technology, Japan VII
VIM
Shi JiaoYing, Zhejiang University, China Young S. Shin, U.S. Naval Postgraduate School, USA Ian Sloan, University of New South Wales, Australia Charles Steele, Stanford University, USA Gilbert Strang, Massachusetts Institute of Technology, USA Jan K Sykulski, University of Southampton, UK Tong Liyong, The University of Sydney, Australia Gretar Tryggvason, Worcester Polytechnic Institute, USA Putchong Uthayopas, Kasetsart University, Thailand Vijay Varadan, Pennsylvania State University, USA Wang Bo Ping, The University of Texas at Arlington, USA Weinan E, Princeton University, USA Tomas Wierzbicki, Massachusetts Institute of Technology, USA Yao Zhenhan, Tsinghua University, China
CONTENTS
Plenary Multiscale Modeling and Computation of Incompressible Flow T.Y.Hou Splitting Methods for Incompressible Viscous Flow Problems with Free and Moving Boundaries E.J. Dean, R. Glowinski, L.H. Juarez and T.W. Pan
3
7
Contributed Papers COMPUTATIONAL CHEMISTRY Computational Chemistry 1 Cation-7r Interactions in Ag(l)-Substitued Alkylbenzenes Complexes: A Theoretical Study Y.P. Wong, KM. Ng and C.W. Tsang
15
Light Propagation in Biological Tissue Using Monte Carlo Simulation A. Aggarwal
19
Predicting Materials Properties Using First Principles Electronic Structure Calculation Y.P. Feng, A.T.L. Lim and J.C. Zheng
23
Correlation of the Distribution of Essential/Trace Elements in Human Hair for Lung Cancer Diagnosis P.L. Mao, H.L.K. Kueh, W.K.A. Ng, Y.T. Wang and P. Wu
28
Dynamic Simulation of an Anaerobic Digestion Process Using Orthogonal Collocation on Finite Elements Method T. T. Lee and P. Wu
32
IX
X
Computational Chemistry 2 Total Algebraic System Identification for Homogeneous Catalyzed Syntheses of Fine Chemicals (Alkenes to Aldehydes) E. Widjaja, C.Z. Li and M. Garland
36
Numerical Solution of Bound-Constrained Nonlinear Systems in Chemical Engineering S. Bellavia, M. Macconi and B. Morini
41
Phonon Dispersion, Structure Stability, Surface Relaxation and Surface Energy for Metals Ni, Cu and Pd J. Cai and J.S. Wang
45
On the Development of Weighted Two-Band Target Entropy Minimization for the Reconstruction of Pure Component Mass Spectra H.J. Zhang, M. Garland, Y.Z. Zeng and P. Wu Computer Aided Additives Study for Steel Hot Dip Galvanizing H.M. Jin, H.L. Liu and P. Wu
49
54
Computational Chemistry 3 Cation-7i Interactions in Ag(l)-Substituted Naphthalene Complexes: an Ab initio Molecular Orbital Study H.M. Lee and C.W. Tsang
58
Band-Target Entropy Minimization (BTEM) - A Novel Approach for Pattern Recognition in Chemical Spectrocopy E. Widjaja and M. Garland
62
Development of a Web-Based Statistical Process Control Analysis and Reporting System for Tablet Processing Plants T.T. Lee, Y.L Li, P. Wu, M.K. Chin, T. Lim and LK. See
67
Monte Carlo Simulation of Surface Segregation in Ni-Co Nanoparticles R. Jayaganthan and G.M. Chow
71
First Principles Studies of the Dissociation of Protonated Alanine (H+-ALA) Complex S. Abirami, C. Wong, N.L Ma, C.W. Tsang and N.K. Goh
76
XI
Molecules and Structures for Molecular Electronic Nanodevices P. Bai, S.W. Yang, P. Wu andE.P. Li
80
COMPUTATIONAL FLUID DYNAMICS Computational Heat Transfer CFD Analysis of Film Cooling of a Cyclindrical Leading Edge with Compound Angle Injection B.S. Chufal and A.R. Srikrihnan
84
Flow Analysis in Port and Cylinder of a Spark Ignition Engine with Oblique Valve M.J. Luo, G.H. Chen and Y.H. Ma
88
Analysis of Chemical Reactions in Argon Thermal Plasma Flow Using the Eddy Dissipation Concept K. Sundaravadivelu, H.W. Ng, S.C.M. Yu, J.C. Chaiand Y.C. Lam
93
Numerical Simulation of 2-D Reacting Flow in Nozzle of Liquid Rocket Motor H.F. Qiang, Y.C. Yang and X L Xia
97
Simulations of the Onset of Convection in a Non-Newtonian Liquid Under Fixed Surface Temperature Boundary Condition K.C. Ting, K.K. Tan and S.Y.T. Choong
102
Computer Visualisation of Fluid Circulation in Annuli of Heated Rotating Cylinders of Low Prandtl Number Fluids Z.D. Xu, Y.L. Huo and T.S. Lee
108
Finite Element Analysis of Hollow Brick Drying in Forced and Mixed Convection Environment H.N. Suresh, J.R. Kumar, P.A.A. Narayana and K.N. Seetharamu
112
Computational Fluid Dynamics 1 High Accuracy Simulation of Multi-Medium Flow C.W. Wang, T.G. Liu and B.C. Khoo
118
XII
The Modified Ghost Fluid Method T.G. Liu, K.C. Hung and B.C. Khoo
122
Gauss Quadrature vs. Analytic Integration for Finite-Element CFD Codes MM. El-Awad, M.J.N. Boyce and F. Tarlochan
126
A Projection Method for Solving Incompressible Viscous Flows on Domains with Moving Boundaries H. Pan, LS. Pan, D. Xu and T.Y. Ng
130
Multi-Physics Simulations of Vortex-Induced Cylinder Vibrations S. Y. Lee and M. Lee
134
Computational Fluid Dynamics 2 Characteristics of Airflow in a Prototype of a Hard Disk Drive X.G. Xu, N.M. Sudharsan, K. Kumar, T.H. Yip, M.A. Suriadi and E.H. Ong
139
Linearized Navier-Stokes Equations and its Applications in Unsteady Airfoil Flows R.J. Cao
143
Cost-Effective Formulation of a Finite-Element Model for Atmospheric Dispersion of Dense Gases M.M. El-Awad
147
Spatial Simulation of 2D Tollmien-Schlichting Wave over Volume Based Viscoelastic Layer Z. Wang, K.S. Yeo and B.C. Khoo
151
Numerical Study of Passive Displacement Ventilation H.J. Poh, J. Lou and K. Kumar
155
Computational Fluid Dynamics Simulation of the Dispersion of Airborne Contaminants in a Work Environment S.M. Salim and G. Xu
159
Numerial Simulation of Low Reynolds Number Channel Flow Over Dimpled Surface Z. Wang, K.S. Yeo, H Lim and B.C. Khoo
163
Computational Fluid Dynamics 3 CFD Modelling of Particle Transport and Biological Reactions in a Mixed Wastewater Treatment Vessel M. Brannock, T. Howes, M. Johns, B.D. Clercq andJ. Keller
167
A Computer Analysis of Turbulent Flow of Acid in the Pickling of Steel Strips B.C. Khoo, D. Xu, W.Y.D. Yuen and W.K. Soh
171
Finite Element Analysis of Non Linear Fluid Structure Interaction in Hydrodynamics Using Mixed Lagrangian-Eulerian Method N.M. Sudharsan, K. Murali and K. Kumar
176
Numerical Study of Fluid Flow through Multiple Bell-Shaped Constrictions in a Tube W. Liao, G.C. Li and T.S. Lee
180
A Mixing Interface Treatment for Numerical Simulation of Tip Clearance Flow of a Small Axial Flow Fan R.J. Cao
184
CFD Simulation of Precipitation Process C.N. Lim
188
Computational Fluid Dynamics 4 Effect of Rotor's Aspect Ratio on Entropy Generation in a Rotor-Casing Assembly B. Abu-Hijleh, J. Y. Tu and A. Subic Lattice Boltzman Method on Nonuniform Mesh M. Cheng and K.C. Hung Numerical Study of the Effects of Check Valve Closure Flow Conditions on Pressure Surges in Complex Fluid Systems with Air Entrainment T.S. Lee Numerical Simulation of Czochralski Crystal Growth by Fixed Grid Technique M.A. Suriadi, D. Xu and B.C. Khoo
192
196
200
204
XIV
A Pre/Post Processor for Finite Element Modelling for Coal Mining Applications S.G. Chen, S. Craig, H. Guo and D.P. Adhikary
209
Evaluation of Turbulence Models for Hydrofoil Turbulent Boundary Layer Flow at High Reynolds Numbers N. Mulvany, J. Y. Tu, L Chen and B. Anderson
213
Mesh Adaptation for Time-Accurate Viscous Compressible Fluid Flow O. Hassan, K.A. Sorensen, K. Morgan and N.P. Weatherill
217
A Numerical Study on Bubble Structure Interaction in Underwater Explosions K.C. Hung, C. Wang, E. Klaseboer, C.W. Wang and B.C. Khoo
223
COMPUTATIONAL ELECTROMAGNETICS AND ELECTRONICS Computational Electronics Delay Computation of Large Interconnect Network Y. CaoandE.C. Tan Modeling of On-Chip Buses for Placement Optimization in Integrated Circuits O. Peyran
227
231
Simulation of Nano-Scale Single-Electron Devices and Circuits P. Bai, E.P. Li and R.M. Patrikar
235
Surface Roughness Modeling R.M. Patrikar and K. Ramanathan
239
A Novel Scheme for Simulating Quantum Effects in Hydrodynamics Model E.P. Liu, E.P. li, P. BaiandR.Q. Han
243
A CAD Tool to Study Thermal Distribution for Block Level Placement in Embedded Systems R.M. Patrikar, K. Muraii and E.P. Li
247
XV
Computational Electromagnetics Applications 1 Comparative to FDTD, PSTD and MRTD Methods in Studies for Planar Stratified Media MS. Tong, Q.S. Cao, K.K. Tamma and Y.L Lu FDTD Analysis Effective of Printed Dipole Antenna M. Tangjitjesada, N. Anatrasirichai and T. Wakabayashi Radiation and Signal Integrity Analysis in Imperfectly Differential Transmission Lines with Full-Wave FDTD Method W.L. Yuan and E.P. Li
251
255
259
Radiated Emission Prediction in Electronics Circuit System Level J. Gao, S.B. Wee and E.P. Li
263
Web-Based Electromagnetic Simulation Y. Fan, Y.L Li, E.P. Li and S.K. Chin
267
Parallelized FDTD Method for Analysis of Signal Integrity in High-Speed Electronic Circuits H.F. Jin, E.P. Li, W.L. Yuan and LW. Li
271
Computational Electromagnetics Applications 2 Generic Approach to Overcome the Low-Frequency Breakdown in Electromagnetic Computations by Moment Methods A.J. Lapovok, N.L. Sudov and O.V. Grimalski
275
Crosstalk Simulation of High Speed Interconnects by an Efficient Finite Difference Method Y. Xiao, E.P. Lee and K.H. Lee
279
Transient Simulation of High Speed Interconnects using Coupled Model Order Reduction and FDTD-Macromodeling Technique E.X. Liu, E.P. Li, X. Ying, LW. Li and K.H. Lee
283
Zigzag Slot Antenna with CPW Feed N. Anantrasirichai, A. Lorphichian, J. Nakasuwan and T. Wakabayashi
287
Analysis Electromagnetic Field of Slot Antenna N. Anantrasirichai, S. Puntheeranurak, C. Jamjank and T. Wakabayashi
291
XVI
Computational Electromagnetics Applications 3 Load Characteristics Analysis of a 100kVA Synchronous Generator with High Temperature Superconducting Field Winding using Finite Element Modelling K.S. Ship, J.K. Sykulski and K.F. Goddard
295
Stochastic Modeling and Characterization of Electrical Trees in Composite Insulation Structure using Fractal Concepts R. Sarathi, C.R. Anilkumar and R. Jayaganthan
299
Application of Robust Design Techniques to Electromagnetic Devices Design Optimization X.K. Gao, J.T. Li, Z. Xie and Z.J. Liu
304
Numerical Simulation of Nonlinear Behavior of Electromagnetic Pulses Inside Dielectrics with Nonlinear Susceptibilities M.T.M. Ho and T.H. Huang
308
The Noise-Robust Variable Step-Size Algorithm for Lattice Form Adaptive MR Notch Filter C. Benjangkaprasert, S. Teerasakworakun and K. Janchitrapongvej A New Constant Modulus Algorithm for Adaptive Equalizer P. Tupchai, C. Benjangkaprasert and O. Sangaroon
316
320
Computing Engineering in Communication The Variable Step Size Blind Adaptive Decorrelating Detector PIC in DS/CDMA System S. Benchapornkullanij, C. Benjangkaprasert and M. Lertwatechakul Performance Evaluation of Finite-Length MMSE-DFE in Wideband Mimo Channel P. Changsuwan, M. Chamchoy, S. Promwong and P. Tangtisanon The Efficiency of WI-FI (IEEE 802.11B) in Presence of Bluetooth System Indoor Propagation T. Subson, P. Supanakoon, P. Rawiwan, M. Chamchoy, S. Promwong and P. Tangtisanon
324
328
332
XVII
A Study of Self-Similar Pseudorandom Teletraffic Generators for Simulation J.S.R. Lee, H.W. Park and H.D.J. Jeong The Delay-Bounded Source Model S. Ruttanawit, M. Lertwatechakul and P. Sooraksa Invertible Integer FFT and DCT Applied on Lossless Image Compression Y.S. Van, CM. Wang, G.D. Su and Q.Y. Shi
336
340
344
Fast and Parallel Electromagnetics Computation 1 Solution of Scattering by Homogeneous Dielectric Bodies using Parallel P-FFT Algorithm W.B. Ewe, Y.J. Wang, L.W. Li and E.P. Li The Common Component Architecture (CCA) Applied to Sequential and Parallel Computational Electromagnetic Applications D.S. Katz, E. R. Tisdale and CD. Norton
348
353
A Fast Algorithm for Three-Dimensional Electrostatic Analysis: Fast Fourier Transform on Multipole (FFTM) E.T. Ong, H.P. Lee, K.H. Lee and KM. Lim
357
An Alternative Implementation of Interpolation in Multilevel Fast Multipole Method (MLFMM) C.P. Lim, Y.J. Zhang, F. Wu and E.P. Li
361
Fast Matrix Algorithms for Hierarchically Semi-Separable Representations S. Chandrasekaran, T. Pals and M. Gu
365
Parallel Fast Multipole Method for Large-Scale Computation of Electromagnetic Scattering Y.J. Zhang, F. Wu, C.P.E. Lim and E.P. Li
369
Fast and Parallel Electromagnetics Computation 2 Two Classes of Preconditioning Techniques for Electromagnetic Wave Scattering Problems J. Zhang, J.H. Lee and C.C. Lu
373
XVIII
Arbitrary Order Edge Element Methods for 2D EM Scattering K. Morgan, P.D. Ledger, O. Hassan, N.P. Weatherill and J. Peraire Parallelization of Pre-Corrected FFT in Scattering Field Computation Y.J. Wang, L.W. Li and E.P. Li Finite Element Analysis of Photonic Crystal Fibres R. Yang and Y.L. Lu Parallelization of Fast Multipole Method using MPI on IBM High Performance Computers F. Wu, Y.J. Zhang, C.P.E. Lim and E.P. Li Parallel Unstructured Meshes Approach for the Simulation of Electromagnetic Scattering O. Hassan, J. Jones, B. Larwood, K. Morgan and N.P. Weatherill
377
381
385
389
393
COMPUTATIONAL MECHANICS Virtual Design Development of Parting Line Generation Tools for a 3D CAD Injection Mould System W.M. Chan and S.L. Lieow
398
Simulation of Temperature and Stress Field in Deposition Process for RPST by Homogenization Method G.L Wang, Z.H Xu and HO. Zhang
402
Geometric Model and Numerical Simulation for the Laying Process of Wire Rope G.L. Wang, J.F. Sun and H.O. Zhang
407
Agent-Based Composable Simulation for Virtual Prototyping W. Xiang, S.C. Fok and G. Thimm Knowledge-Based Rapid Virtual Engineering System for Product and Tooling Design R.D. Jiang, T.W. Lim and B.T. Choek
413
417
XIX
Virtual Aesthetic Design: Architecture and Some Results W.S. Li, S.H. Xu, G. Zhao and Y.L. Ke Numerical Simulation and Experiment on Prediction for Retention Force H.Z. Dong, T.W. Lim and B.H. Low
421
425
Couple Field Analysis and Nanostructured Material Failure Probability of Wire Bonding Packages F. Wang, Y. Y. Wang and C. Lu
429
Shape Control of Smart Composite Plate Structures Based on Actuator Shape Optimisation Q. Nguyen and L. Y. Tong
434
Numerical Investigation of Micro-Scale Sheet Metal Bending using Laser Beam Scanning Z.Q. Zhang, G.R. Liu andXM. Tan
438
Three-Dimensional Finite Element Study of the Elastic Fields in Quantum Dot Structures Q.X. Pei and C. Lu
443
Directional Dependence of Surface Morphological Evolution of Heteroepitaxial Films P. Liu, Y. W. Zhang and C. Lu
447
Forming of Nanostructured Materials: Numerical Analysis in Equal Channel Angular Extrusion (ECAE) of Magnesium, Aluminium and Titanium Alloys B.H. HuandJ.V. Kreij
454
CAD Mechanical Design 1 The Development of Standard Part Database for Progressive Die Design Z.H. Wang
459
The Application of Sensitivity Analysis to Modifying Car Body Configuration X.R. Zhang and M. Zhu
463
XX
The Simulation of the 7t-Type Constraint Bending Process H.Z. Xu
468
Optimising the Dimensions of Cylindrical Ultrasonic Motor Q.G. Yang and S.P. Lim
472
Design and Analysis of a High-Efficiency MR Valve W.H. Li, H. Du and N.Q. Guo
476
Computer Design and Visualization on New Loop Worm Transmission Q.S. Luoand B.L. Han
480
CAD Mechanical Design 2 A Computer-Aided Optimisation Approach for the Design of Cooling Channels and Selection of Process Parameters in Plastic Injection Moulding L.Y. Zhai, Y.C. Lam, K. Taiand S.C. Fok Wavelets-Based Multiresolution Representation and Manipulation of Closed B-Spline Curve G. Zhao, S.H. Xu, W.S. LiandX.X. Zhu A Piping Modeling and Calculation System H.X. Gao
485
490
494
Optimization of Injection Molded Part Based on the CAE Simulation V. LiandC.R. Pan
498
Evaluating Plane-Strain Forging of Magnesium Alloy AZ31 using Finite Element Analysis S.C.V. Lim, M.S. Yong and CM. Choy
502
Numerical Structural Analysis 1 Comparative Structural Evaluation of Protective Helmets using the Finite Element Method A. Subic, M. Takla and C. Mitrovic
506
XXI
Buckling Analysis of Composite Spherical Panels with Random Material Properties B.N. Singh, N.G.R. lyenagarand D. Yadav
510
Numerical Analysis of Adhesively Bonded Cylindrically Curved Lap Joints C. Y. Qian and L Y. Tong
514
Numerical Analysis of the Effect of Interphase on the Deformation of Particle-Reinforced Composites W.X. Zhang, P.P. Yang and T.J. Wang
518
Numerical Finite Deformation Analysis on Solid Propellant Grain using Finite Element Method Y.C. Yang, H.F. Qiang, G.M. Xu and H.S. Zhao
522
Investigation on the Counter-Intuitive Phenomenon of ElasticPlastic Beams Y.M. Liu, G.W. Ma and Q.M. Li
527
Numerical Structural Analysis 2 Computational Material Testing of Pre-Damaged Metals using Damage Mechanics Models Y. Toi and S. Hirose
531
Study of the Influence of the Suspension Parameters on Suspension Kinematics Characteristic D. Hua, Z.M. TaoandX.C. Gao
535
Computational Study of Vapor Pressure Assisted Crack Growth at Polymer/Ceramic Interfaces C.W. Chong, T.F. Guo and L. Cheng
539
Distortion Prediction using Finite Element Method Y.C. Tse, P. Liu, Y.Y. Wang, C. Lu, G.R. Liu and K.P. Quek
543
Interface Pressure Distribution in Automotive Drum Brake A. Tom a, M. Takla and A. Subic
548
A New High Precision Direct Integration Scheme for Nonlinear Rotor-Seal System J. Hua, Z.S. Liu, Q.Y. Xu and S. Swaddiwudhipong
552
XXII
Numerical Structural Analysis 3 Delamination Identification using Piezoelectric Fiber Reinforced Composite Sensors P. Tan and L. Y. Tong
557
A Simple Model for Predication of Crack Spacing in Concrete Pavements G. Chen and G. Baker
561
Hellinger-Riessner Mixed Formulation for the Nonlinear Frame Element with Lateral Deformable Supports S. Limkatanyu
565
Energy Approach to Numerical Modelling of Crack Spacing in Reinforced Concrete G. Chen and G. Baker
569
Effect of Bolt Connections on Dynamic Response of Cylindrical Shell Structures Q.H. Cheng, S. Zhang and Y.Y. Wang
573
Simulation of Ductile Fracture in Tubular Joints Through a Void Nucleation Model X.D. Qian, Y.S. Choo and J.Y.R. Liew
577
Stress Intensity Factors for Doubler-Plate Reinforced Tubular Joint Subjected to Axial Load R. Jiang and Y.S. Choo
583
Computational Dynamics Vibrational Analysis of Poroelastic Bar T.Z. Chen, Z. Zong and K.C. Hung
587
Finite Element Failure Modelling of Corrugated Panel Subjected to Dynamic Blast Loading J.W. Boh, LA. Louca and Y.S. Choo
591
Simulation of Acoustic Radiation and Scattering using Boundary Element Method Z.Y. Yan, K.C. Hung and H. Zheng
595
XXIII
Numerical Characterization of RC Plate Response and Fragmentation Under Blast Loading K.Xu, Y. Lu and H.S. Lim
599
Dynamic Analysis of Brick-Concrete Structure by using Wilson-6 Method DM. Hou, Y.B. Wang, M. Yin andX.Y. Ma
604
A New Computational Mathematical Model of Hydraulic Damper Y.B. Wang and DM. Hou
608
Broadband Echoes from Underwater Targets H. Lew and B. Nguyen
613
High Performance Computing and Numerical Methods 1 Competing Risks for Reliability Analysis Using Cox's Model F.AM. Elfaki, I. Daud, N.A. Ibrahim, M.Y. Abdullah and I. Lukman
618
Parallel Multibody Dynamics using the Message Passing Interface B. Fox, F.J. Welna, D.J. Lilja and L.S. Jennings
622
Some Computation Aspects in Model-Order Reduction of Flexible Structures R. Saragih
626
Meshless Analysis of the Obstacle Problem for Timoshenko Beams Based on a Locking-Free Formulation J.R. Xiao, F. Wang and Q.H. Cheng
632
Efficient Parallel Algorithm for Large-Scale Molecular Dynamics Simulation in Microscale Thermophysics B. Wang, J.W. Shu, WM. Zheng and J. Z. Wang
637
Improving the Cell Mapping Method and Determining Domains of Attraction of a Nonlinear Structural System Q. Ding, Z.S. Liu and J.J. Li
642
XXIV
High Performance Computing and Numerical Methods 2 High Rate Dynamic Response of Structure using SPH Method Z. S. Liu, S. Swaddiwudhipong and C. G. Koh
646
The Generalized Differential Quadrature Rule T.Y. Wu, Y.Y. Wang and G.R. Liu
651
Recovery Based Submodeling Finite Element Analysis H. Gu and Z. Zong
655
A Hierarchical Approach to Surface Partition of Polygonal Meshes J. Shen and D. Yoon
659
A Combined Meshfree Method and Molecular Dynamics in the Multiscale Length Simulation Q.X. Wang, T.Y. Ng, K.Y. Lam, H. Li and X.J. Fan
663
COMPUTATIONAL SCIENCE Computational Science 1 Self-Similar Problems in Multidimensional Conservation Laws S. Canic, B.L. Keyfitz and E.H. Kim
667
Variance Reduction of Monte Carlo Methods for Option Pricing under Stochastic Volitility Models X.Q. Liu and Y.Y. Wong
671
A Superlinearly Convergent Algorithm for Large Scale Multistage Stochastic Nonlinear Programming F.W. Meng, R. Tan and G.Y. Zhao
675
Computation of Network Delay with Prioritised Traffic Involving the Multi-Priority Dual Queue A. Bedford and P. Zeephongeskul
679
Simulation Solutions of Networks with Prioritised Traffic Involving the Multi-Priority Dual Queue A. Bedford and P. Zeephongeskul
683
XXV
Inverse of a Certain Band Toeplitz Matrix K.J. Lim
687
Computational Science 2 Time-Splitting Sine-Spectral Approximation for the Nonlinear Schrbdinger Equations W.Z. Bao Calculating Global Minimizers of a Nonconvex Energy Potential D. Gao and P. Lin
692 696
A QR-Type Method for Computing the SVD of a General Matrix Product/Quotient D.L. Chu
700
Newton's Method for Non-Differentiable Equations: Convergence and Applications D.F. Sun
705
Numerical Solution of Blow-Up Problems Using MeshDependent Variable Temporal Steps K.W. Liang, P. Lin and R.C.E. Tan
709
Nonlinear Boundary Layers of the Boltzmann Equation S. Ukai, T. Yang and S.H. Yu
713
Computational Science 3 A New Algorithm for Division of Polynomials L.H. Fan Ginzburg-Landau System and Superconductivity Near Critical Temperature X.B. Pan Geodesic Approximations of 2D Hydrodynamics W. Lawton Multi-Phase Flow Models and Methods for Lava Lamps and Life Sciences J. Shuo
717
722 726
730
XXVI
A Reynolds-Uniform Numerical Method for Prandtl's Boundary Layer Problem for Flow Past a Plate with Mass Transfer J.S. Butler, J.J.H. Miller and G.I. Shishkin
733
GRID COMPUTING Grid Computing and Related Issues Constructing an Ogsa-Based Grid Computing Platform W. Jie, T.Y. Zang, Z. Lei, W.T. Cai, S.J. Turner and LZ. Wang
738
An Ogsa-Based Directory Service Z. Lei, T. Y. Zang and W. Jie
742
Grid Resource Management Information Services for Scientific Computing H.N. Lim, D.P. Spooner, S.A. Jarvis, G.R. Nudd, LZ. Wang and W. Jie An Open Producer and Consumer Management System for Grid Environment 7". Y. Zang, Z. Lei and W. Jie
746
750
Replica Selection Framework for Bio-Grid Computing LZ. Wang, W.T. Cai, B. Schmidt, B.S. Lee and W. Jie
754
A Grid Testbed Supporting MPI Applications W. Jie, Z. Lei, T.Y. Zang and L.Z. Wang
758
Running MPI Application in the Hierarchical Grid Environment L.Z. Wang, W. Jie and W. Xue
762
Clustering Systems and Applications Cluster-Based Parallel Simulation for Large-Scale Power System Dynamics J.F. Yan, W. Xue, J.W. Shu, X.F. Wang and W. Jie
766
Hardware Impact on Communication Performance of Beowulf Linux Cluster Y. Tang, Y.Q. Zhang and Y.C. Lee
773
XXVII
D-GRIDMST: Clustering Large Distributed Spatial Databases J. Zhang and Y. Cao
777
Massively Parallel Sequence Analysis with Hidden Markov Models B. Schmidt and H. Schroder
781
Tabu Search and Simulated Annealing on the Scheduling of Pipelined Multiprocessor Tasks M.F. Ercan and Y.F. Fung
785
Distributed Systems and Applications TME - A Distributed Resource Handling Tool T. Imamura, Y. Hasegawa, N. Yamagishi and H. Takemiya
789
Protecting Integrity in a Distributed Computing Platform T.T. TayandY.Y. Chu
793
An Integrated Distributed Computing Platform on a Decentralized Architecture T.T. TayandY.Y. Chu Grid Based Problem Solving Environment for Scientists E. Sindhu, U. Periathampy and M. Kantharaj Management of EJB Applications using Java Management Extensions J.K. Park, J.B. Kim and D.J. Sohn
798
803
807
HIGH END COMPUTATIONS Data Mining On Applications of Data Mining to Human Resources Data V. Kamalesh and V. Kuralmani Linguistic Rule Extraction by GA Combining DDR and RBF Neural Networks X.J. FuandL.P. Wang
814
818
XXVIII
Web-Based Configuration and Control of HLA-Based Distributed Simulations N. Julka, D. Chen, B.P. Gan, S.J. Turner and W.T. Cai Competing Risks with Censored Data: A Simulation Study /. Lukman, N.A. Ibrahim, F. Maarof, I. Daud and M.N. Hassan Combining Support Vector Machine (SVR) with Genetic Algorithm (GA) to Optimize the Initial Positions of Agents in the Land Combat Simulation L.J. Cao, K.S. Chua, W.K. Chong, H.P. Lee and L Qian Acquisition of Background Coefficient X.Y. Qi, C. Lu andZ.G. Liu
822 826
830
834
Visualization A Framework for a Real-Time Distributed Rendering Environment H.B. ZhuandK.Y.T. Chan
838
Immersive Visualisation of Nano-lndentation Simulation of Cu S.H. Xu, J. Li, C.H. Li and F. Chan
846
Distributed Processing and Visualisation of MEG Data S. Date, S. Shinji, M.M. Yuko, S. Jie, B.S. Lee, W.T Cai and L.Z. Wang
850
A Fast Algorithm of Level Set Method for 3D Prostate Surface Detection F. Shao, K. V. Ling and W.S. Ng
855
A Pathological Diagnosis System for Brain White Matter Lesions S.H. Han and F. Li
859
Using Streaming SIMD Extension on High Level Image Processing M.F. Ercan and Y.F. Fung
867
An Approach for Optimization of Imaging Parameters for Ground Surface Inspection using Machine Vision V. Sivasankaran, A. Jothilingam, B. Rajmohan and G.S. Kandasami
871
XXIX
MICRO-ELECTRO-MECHANICAL SYSTEMS Model Development and Behavior Simulation of pH-StimulusResponsive Hydrogels H. Li, T.Y.NgandY.KYew
875
Fringe-Field and Ground Plane Effects for Electrostatic MEMS Simulations A. Ongkodjojo and F.E.H. Tay
879
A Coupled Multi-Field Formulation for Stimuli-Responsive Hydrogel Subject to Electric Field Z. Yuan, H. Li, T. Y. Ng and J. Chen
884
Numerical Simulation of Electromechanical Behavior for MEMS Optical Switch F. Wang, C. Lu and Z.S. Liu
888
Design and Modelling High-Efficiency Accelerometers AT. Ng, W.H. Li, H. Du andN.Q. Guo A Finite Element Analysis for Piezoelectric Smart Plates Including Peel Stresses Q. T Luo and L Y. Tong
893
897
MESHING A Study on Three-Dimensional Mesh Generation for Coal Mining Modeling S.G. Chen, S. Craig, D.P. Adhikary and H. Guo
901
Linear and Torsion Spring Analogies for Dynamic Unstructured Meshes in Fluid Structure Interaction Problems - A Comparative Study R. Ajaykumar, N.M. Sudharsan, K. Murali, K. Kumar and B.C. Khoo
905
Solving Biot's Consolidated Model using Sparse Matrix Technology Y.L Li and K. H.Lee
909
XXX
3-D Multi-Block Orthogonal Grid Generated by Laplace Equation with Sliding Boundary Condition Z.K. Zhang
913
Meshing Human Brain with Hexahedral Meshes from Images Slices using Mesh Mapping Method Y.L. LiandK.H. Lee
917
Plenary
This page is intentionally left blank
Multiscale Modeling and Computation of Incompressible Flow T h o m a s Y. Hou*
A b s t r a c t . Many problems of fundamental and practical importance contain multiple scale solutions. Direct numerical simulations of these multiscale problems are extremely difficult due to the range of length scales in the underlying physical problems. Here, we introduce a dynamic multiscale method for computing nonlinear partial differential equations with multiscale solutions. The main idea is to construct semi-analytic multiscale solutions local in time, and use them to approximate the multiscale solution for large times. Such approach overcomes the common difficulty associated with the memory effect and the non-uniqueness in deriving the global averaged equations for incompressible flows with multiscale solutions. It provides an effective multiscale numerical method for computing incompressible flow with multiscale solutions.
1
Introduction
Many problems of fundamental and practical importance have multiple scale solutions. Composite materials, porous media, and turbulent transport in high Reynolds number flows are examples of this type. The direct numerical solution of multiple scale problems is difficult due to the wide range of scales in the solution. It is almost impossible to resolve all the small scale features by direct numerical simulations due to the limited capacity in computing power. On the other hand, from an engineering perspective, it is often sufficient to predict the macroscopic properties of the multiscale systems, such as the effective conductivity, elastic moduli, permeability, and eddy diffusivity. Therefore, it is desirable to develop a method that captures the small scale effect on the large scales, but does not require resolving all the small scale features. In recent years, we have introduced a multiscale finite element method (MsFEM) for solving partial differential equations with multiscale solutions [5, 6, 4, 3]. The central goal of this approach is to obtain the large scale solutions accurately and efficiently without resolving the small scale details. The main idea is to construct finite element base functions which capture the small scale information within each element. The small scale information is then brought to the large scales through the coupling of the global stiffness matrix. Thus, the effect of small scales on the large scales is correctly captured. In our method, the base functions are constructed from the leading order homogeneous elliptic equation in each element. As a consequence, the base functions are adapted to the local microstructure of the differential operator. In the case of two-scale periodic structures, we have proved that the multiscale method indeed converges to the correct solution independent of the small scale in the homogenization limit [6]. We remark that the idea of using base functions governed by the differential equations has been used in the finite element community, see e.g. [1, 8, 2]. "Applied Mathematics, 217-50, Caltech, Pasadena, CA 91125, USA. Email:
[email protected]. Research was in part supported by a grant DMS-0073916 from the National Science Foundation.
3
4 2
Multiscale F i n i t e E l e m e n t M e t h o d
In this section, we briefly describe the multiscale finite element method for elliptic problems with highly oscillating coefficients: Leu := - V • ( a ( - ) V u ) = /
in fi, u = 0 on T = DQ,
(1)
where a(x) = (a,ij(x/e)) is a symmetric positive definite matrix. The main idea of MsFEM is to construct finite element base functions which capture the small scale information within each element. This is accomplished by requiring that the base functions satisfy the leading order homogeneous differential equation within each coarse grid element: Le<j>€ = 0,
x
eK,
with some appropriate boundary condition for cff in the boundary of the local element K. The choice of boundary conditions in defining the multiscale bases will play a crucial role in approximating the multiscale solution. Intuitively, the boundary condition for the multiscale base function should reflect the multiscale oscillation of the solution u across the boundary of the coarse grid element. The simplest choice of the boundary condition for the base function is a linear boundary condition. Using homogenization theory, we can show that the multiscale finite element method gives a convergence result uniform in e as e tends to zero. This is the main feature of this multiscale finite element method over the traditional finite element method. T h e o r e m 2.1 Let u 6 H2(ft) be the solution of (1) and «/, be the finite element solution obtained from the space spanned by the multiscale bases, 0 £ . Then we have \\u - uh\\Hi < C(h + e)\\f\\Li +c(^y'2\\u0\\H2, where «o £ H2(Q) n W 1,0 °(fi) is the solution of the homogenized 2.1
(2)
equation.
Over-Sampling
As we can see from the above theorem, the multiscale FEM indeed gives correct homogenized result as e tends to zero. This is in contrast with the traditional FEM which does not give the correct homogenized result as e —* 0. The error would grow like 0(h2/e ) . On the other hand, we also observe that when h ~ e, the multiscale method attains large error in both H1 and L2 norms. This is what we call the resonance effect between the grid scale (h) and the small scale (e) of the problem. Motivated by our convergence analysis, we propose an over-sampling method to overcome the difficulty due to scale resonance [5]. The idea is quite simple and easy to implement. Since the boundary layer in the first order corrector is thin, O(e), we can sample in a domain with size larger than h + t and use only the interior sampled information to construct the bases; here, h is the mesh size and e is the small scale in the solution. By doing this, we can reduce the influence of the boundary layer in the larger sample domain on the base functions significantly. As a consequence, we obtain an improved rate of convergence.
5 2.2
F I N E SCALE RECOVERY
To solve transport problems in the subsurface formations, as in oil reservoir simulations, one needs to compute the velocity field from the elliptic equation for pressure, i.e v = —a e Vp, here p is pressure. For MsFEM, the fine scale velocity can be easily recovered from the multiscale base functions, noting that they provide interpolations from the coarse grid to the fine grid. To test the accuracy of the recovered velocity and effect of small-scale velocity on the transport problem, we have performed two sets of computations. In the first computation, we reconstruct the fine scale velocity field (1024 by 1024 grid) from a coarse grid (64 by 64 grid) pressure computation, and use the reconstructed fine scale velocity field to transport the saturation in the two-phase flow. In the second computation, we compute both the pressure and the saturation using a fine grid (1024 by 1024). To demonstrate that we can recover the fine grid velocity field from the coarse grid pressure calculation, we compare the velocity fields obtained by the two approaches. The agreement is excellent. The recovered velocity field captures very well the layer structure in the fine grid velocity field. Moreover, we observe that the agreement in the saturations obtained by the two approaches is striking. 3
M u l t i s c a l e M o d e l i n g of I n c o m p r e s s i b l e F l o w
In order to obtain a coarse grid model for two-phase flow, we need to derive a homogenized equation for the saturation equation which is hyperbolic. This is a very difficult problem due to the nonlocal memory effect [10]. The difficulty encountered here is similar in spirit to that in obtaining a large scale averaged equation for the incompressible Euler or Navier Stokes equations. One of the earliest attempts in deriving the homogenized equation for the incompressible Euler equation was made by McLaughlin, Papanicolaou and Pironneau in [9]. More specifically, they considered the following initial value problem:
ut + (u- V)u = -Vp, with V-u = 0 and highly oscillatory initial data u(x,0) = U{x) + W{x,x/e). They then constructed multiscale expansions for both the velocity field and the pressure. In doing so, they made an important assumption that the microstructure is convected by the mean flow. Under this assumption, they constructed a multiscale expansion for the velocity field as follows: u £ (x,t) =u(x,t)
+ w(
v
' ,-,x,t)
+ eu1{
v
,-,x,t)
+0(e2).
The pressure field p £ is expanded similarly. From this ansatz, one can show that 6 is convected by the mean velocity: 8t + u-V8 = 0, 8(x,0)=x. It is a very challenging problems to develop a systematic approach to study the large scale solution in three dimensional Euler and Navier-Stokes equations. The work of McLaughlin, Papanicolaou and Pironneau provided some insightful understanding how small scales interact with large scale and how to deal with the closure problem. However, the problem is still not completely resolved since the cell problem obtained this way does not have a unique solution. Additional constraints need to be enforced in order to derive a large scale averaged equation. With additional assumptions, they managed to derive a variant of the k — e model in turbulence modeling. Recently, together with Dr. Danping Yang [7], we have studied convection of microstructure of the 3-D incompressible Euler equations using a new approach. We found that the small scales
6 are convected by the full velocity field, i.e. it is more appropriate t o expand the velocity field as follows: ul{x,t) =u(x,t)+w(
v
,-,x,t)
+eiti(
,-,x,t)
+0(e2).
where 9t£ + u £ - V « £ = 0 ,
ee{x,0)=x.
Thus, the oscillatory part of 9e could have order one contribution t o the mean velocity of the incompressible Euler equation. By using a = 9e as a new variable, we can reformulate the Euler equation in (a, t) and perform multiscale expansion for the stream function and the flow map in terms of a/e. This change of variables amounts t o using a Lagrangian formulation of the Euler equation. Using this reformulation, we can derive both the homogenized equation and the periodic cell problem. The resulting problem is well-posed provided that we project certain resonance modes in the velocity field. We have also generalized this multiscale analysis to initial velocity field that has many or even continuous spectrum of scales. Similar analysis can be carried out for the two-phase flow with highly oscillating or random permeability field. References [1] I. Babuska, G. Caloz, and E. Osborn, Special Finite Element Methods for a Class of Second Order Elliptic Problems with Rough Coefficients, SIAM J. Numer. Anal., 31 (1994), 945-981. [2] F . Brezzi, L. P. Franca, T. J. R. Hughes and A. Russo, b = J g, Comput. Methods in Appl. Mech. and Engrg., 145 (1997), 329-339. [3] Z. Chen and T. Y. Hou, A Mixed Finite Element Method for Elliptic Problems with Rapidly Oscillating Coefficients, Math. Comput., published electronically on June 28, 2002. [4] Y. R. Efendiev, T. Y. Hou, and X. H. Wu, Convergence of A Nonconforming Element Method, SIAM J. Numer. Anal., 37 (2000), 888-910.
Multiscale
Finite
[5] T. Y. Hou and X. H. Wu, A Multiscale Finite Element Method for Elliptic Problems in Composite Materials and Porous Media, J. Comput. Phys., 134 (1997), 169-189. [6] T . Y. Hou, X. H. Wu, and Z. Cai, Convergence of a Multiscale Finite Element Method for Elliptic Problems With Rapidly Oscillating Coefficients, Math. Comput., 68 (1999), 913-943. [7] T. Y. Hou and D.-P. Yang, Multiscale Analysis for Three-Dimensional Equations, in preparation, 2002.
Incompressible
Euler
[8] T. J. R. Hughes, Multiscale Phenomena: Green's Functions, the Dirichlet-to-Neumann Formulation, Subgrid Scale Models, Bubbles and the Origins of Stabilized Methods, Comput. Methods Appl. Mech Engrg., 127 (1995), 387-401. [9] D. W. McLaughlin, G. C. Papanicolaou, and O. Pironneau, Convection of Microstructure Related Problems, SIAM J. Applied Math, 45 (1985), 780-797.
and
[10] L. Tartar, Nonlocal Effects Induced by Homogenization, in P D E and Calculus of Variations, ed by F . Culumbini, et al, Birkhauser, Boston, 925-938, 1989.
Splitting Methods for Incompressible Viscous Flow Problems with Free and Moving Boundaries
E. J. Dean*, R. Glowinski*, L. H. Juarez*, T.W. Pan* *Department of Mathematics, University of Houston, Houston, Tx 77204-3008 t Departamento de Matematicas, Universidad Autonoma Metropolitana-I, Mexico, D. F., CP 09340 Email:
[email protected],
[email protected],
[email protected],
[email protected]
The main goal of this presentation is to discuss an (almost) unified approach for the computational treatment of incompressible viscous flow problems with free or moving boundaries. The methodology to address the solution to these problems relies on the following ingredients (several of them fairly classical): (i) Time discretization by operator-splitting. (ii) Space approximation by finite element methods to take advantage of variational formulations of the existing above problems. (iii) In the case of flow with moving rigid boundaries, volume distributed Lagrange multiplier based fictitious domain methods to solve the flow equations on a fixed space region. This approach has proved efficient for the simulation of particulate flow with many particle3s (> 102, typically). (iv) Wave-like equation treatment of the advection. (v) H1 or L2-projection methods for the treatment of the incompressibility. We shall validate the above methodology through the solution of test problems in two and three-dimensions these problems include: the settling and interaction of spherical and ellipsoidal rigid bodies in Newtonian, Visco-Elastic, and Visco-Plastic fluids (see attached pictures) and the simulation of an incompressible viscous flow with surface tension on the free boundary.
7
8
?z!st8mmMam&s&!>
silfHBlSgSt iiiiffliHBg
1
0
Figure 1: Settling of a Rigid Ellipsoid in an Newtonian Incompressible Viscous fluid.
9
Figure 2: Settling of a Rigid Ellipsoid in an Incompressible Oldroyd-B Visco-Elastic Fluid.
10
-
L t=12.14
Figure 3: Settling and interaction of Two Rigid Ellipsoid in a Newtonian Incompressible Viscous fluid.
11
IDul
1.8
1.6
1.4
1.2
0
0.2
0.4
0.6
0.8
1
F i g u r e 4: Settling of rigid disks in an incompressible Bingham Visco-Plastic Fluid.
This page is intentionally left blank
Contributed Papers
This page is intentionally left blank
CATION-7C INTERACTIONS IN AG(I)-SUBSTITUED ALKYLBENZENES COMPLEXES: A THEORETICAL STUDY
;
Y. P. WONG, K. M. NG, AND C. W. TSANG* Department of Applied Biology & Chemical Technology, Hong Kong Polytechnic University E-mail:
[email protected] (*contactperson)
Introduction The binding of Ag (I) cation to alkylbenzenes (RBz) is chosen as model systems to investigate the alkyl substituent effects in cation-7i interactions, which have been postulated to be a new type of interaction forces important in biological recognition, nano-electronics and the design of therapeutic drugs.1
Experimental High-energy (4.7 keV, He as collision gas) and low-energy (15-45eV, Ar as collision gas) collision-induced dissociations (CID) of electrospray ionization (ESI) generated [RBz,Ag-RBz2]+ heterodimers (where RBz! and RBZ2 are alkylbenzenes) were measured with a Finnigan-MAT 95S B-E tandem mass spectrometer with B/E linked scans, and a Micromass Quattro II triple quadrupole mass spectrometer, respectively.
Theoretical Methodology Standard ab initio molecular orbital calculations were carried out by using the Gaussian 98 package on SGI Indigo2/Octane workstations at the approximate CCSD(T)/(HW(f), 631G(d)) level of theory using the additivity relation as below. CCSD(T)/(HW(f), 6-31G(d)) s CCSD(T)/STO-3G(d) + [MP2/(HW(f), 631G(d)) - MP2/STO-3G(d)]
Results and Discussion The relative Ag (I) ion binding energies (affinities) of 15 alkylbenzenes were measured by the standard mass spectrometric kinetic method2 based on the competitive dissociation of the [RBzi-Ag-RBz2]+ heterodimers to their respective monomer complexes under high-
15
16 Alkylbanzanas
In { fct*0-R*«i]* / A [ A B - R B « 2 ] * )
Bwizen*
0.00 0.97 1 0.06
Ethyl benzene
1.63 * 0.07 (0.31)
m-Xylerm
1.94 i 0.10
n-Propytbenzene
216 ' 0 . 1 0
I-Propyttwnzene
(0.04)
| V :-
2.20 * 0.11
n-Butytbsnztfrw
2.51 t 0 . l l
i-Butyl b o n z e no
2.59 i 0.12 2.68 - 0.13
s-Butyibenzsn* (0.02) t-Butylbenzene
—*"
1,3,5-Triroethylbenzene
2.70 10.15 2.87*0.15 3.11 +0.15
n-PerrtytmfiZBfW 0.50
Figure 1
1,2,4,5-Tatram«thy(banzsn»
3.61 tO. 15
Pantamethylbanzene
4.34 ±0.15
H«xamethyl benzene
4.88 - 0 16
Experimentally measured /n(k|Ag-RBZl]+ / kiAg-RB^]*) values for He-CID of Ag* bound heterodimers of alkylbenzenes. The /n(k|Ag.RBz1]+ / k[Ag-RBz2]+) values are taken to be equal to /n([Ag-RBzi]+ / [AgRBz2]+) ion intensity ratio values. The data presented under the heading /w(k[Ag.RBz]+ / k[Ag-Benzoie]+) are average ± standard derivation of cumulative values expressed relative to benzene. The values in parenthesis are the arithmetic difference of measured values having a common reference alkylbenzene.
Table 1 Experimental measured and theoretical calculated absolute Ag+ affinities of alkylbenzenes at OK. Alkylbenzenes
Theoretical Affinities^
Experimental Affinities
(kJ mol" )
(kJ mol"1)
Benzene
156.7
157.7
Toluene
168.8
169.4
Ethylbenzene
172.9
177.4
m-Xylene
181.2
181.2
n-Propylbenzene
—
183.8
i-Propylbenzene
—
184.3
n-Butylbenzene
—
188.1
i-Butylbenzene
—
189.0
s-Butylbenzene
—
190.1
t-Butylbenzene
1
190.4
17
1,3,5-Trimethylbenzene
193.4
192.4
—
195.3
200.6
201.4
Pentamethylbenzene
—
210.2
Hexamethylbenzene
209.4
216.8
n-Pentylbenzene 1,2,4,5-Tetramethylbenzene
a
Calculated at the CCSD(T)/(HW(f), 6-31G(d)) level. b Obtained from their relative Ag (I) affinities measured
from the high-energy CID.
Table 2 Experimental Ag+ afffinities at OK (kJmol"1) of acetone and acetonitrile. This worka AH [ A g-L n ]+
A(AS)app
RA Kinetics
Threshold-CID
Acetone
148.6+1.8(3.4)
0.6 + 0.8(1.5)
160±19 b
—
Acetonitrile
162.8 ±1.0 (1.9)
6.7 + 0.7(1.3)
—
162c
L„
a
Literature values
Weighted results with experimental uncertainties given as + S.D. (90% confidence interval). " Ref [4]. c Ref
[5].
Acknowledgement The award of a Hong Kong Polytechnic University research studentship and graduate scholarship to YPW and the funding support of the Research Grant Council of Hong Kong (Area of Excellence Project No. P-10/2001 and CERG Project No. 5190/00P) are gratefully acknowledged.
18 energy He-CID conditions. The experimental measured ion intensity ratio values, /n([AgRBz]]+ / [Ag-RBz2]+), are summarized in a relative Ag (I) ion affinity ladder diagram shown in Figure 1. Theoretically calculated values for benzene, toluene, ethylbenzene, mxylene, 1,3,5-trimethylbenzene, 1,2,4,5-tetramethylbenzene, pentamethylbenzene were calculated with an estimated uncertainty of ±15 kJ mol"1.3 Based on these theoretical calculated values, the experimental absolute affinities of the 15 alkylbenzenes (in kJ/mol) were established from their relative affinity ladder values and summarized in Table 1. These experimental absolute values were further validated by using them as reference values in extended kinetic method2, measurement of Ag (I) ion affinities of acetone (148.9 kJ mol"1) and acetonitrile (162.8 kJ mol"1), which were in good agreement with that obtained by radiative association kinetic analysis (160 + 19 kJmol" ) and the thresholdCID method (162 kJ mol"1)5, respectively. Our results show that the Ag(I) ion affinities of alkylbenzenes increase significantly with the number of methyl substitutions, the chain length of n-alkyl substituents, and the extent of branching in alkyl substituents.
The results are attributed to the positive
inductive effect and polarizability effect of the alkyl substituents, leading to enhanced ion-quadrupole and ion-induced dipole interaction between the Ag(I) ion and the aromatic ring.
Conclusions The absolute Ag (I) ion affinities of 15 alkylbenzenes were successfully established based on the theoretical calculated affinities. The alkyl substituents have been found to have a pronounced effect on Ag(I) ion affinities of alkylbenzenes.
References 1. 2. 3. 4.
Ma, J.C.; Dongherty, D.A. Chem. Rev. 1997, 97, 1303. Cooks, R.G.; Wong, P.S.H. Ace. Chem. Res., 1998, 31, 379. Ma, N. L. Chem. Phy. Lett., 1998, 297,230. Ho, Y. P.; Yang, Y. C ; Klippenstein, S. J.; Dunbar, R. C. J. Phy. Chem. A, 1997, 101, 3338. 5. Shoeib, T.; EI Aribi, H.; Siu, K. W. M.; Hopkinson, A. C. J. Phys. Chem. A 2001, 705,710.
Light Propagation in Biological tissue using Monte Carlo Simulation Aslmam
Aggarwal
Lecturer, Department of Electrical and instrumentation Engineering Sant Longowal Institute ofEngineering and Technology. Longowal. Sangrur, Punjab. INDIA Email:
[email protected]
Non-invasive diagnosis is medicine has shown considerable attention in recent years. Several methods are already available for imaging the biological tissue like X-ray computerized tomography, magnetic resonance imaging and ultrasound imaging etc. But each has its own disadvantages. Optical tomography is one of the emerging methods in the field of medical imaging which is non-invasive in nature. The only problem that occurs in using light for imaging the tissue is that it is highly scattered inside tissue, so the propagation of light in tissue is not confined to straight lines as the case with X-ray tomography. So the need arises to understand the behavior of propagation of li^it in tissue. There are several methods for light interaction with tissue These methods can be divided into two categories viz. deterministic methods and stochastic methods. Deterministic methods involve the solution of radiative transfer equation (RTE) which is complex integrodifferential equation and is difficult to solve. Stochastic methods model the RTE through dealing individual interaction. The individual interactions are modeled explicitly by deriving probability density functions in random walk and Markov random field models. Monte Carlo method is stochastic method which is simple technique for simulation of light through tissue, m the Monte Carlo methods individual history of photons is simulated as they undergo scattering and absorption events in the biological tissue. This is continued until the photon is either absorbed or is emitted from the boundary of the tissue. The data obtained from the Monte Carlo simulation is the number of photons detected at different times which is known AS temporal point spreadfunction^TPSF). This TPSF is used by nonlinear optimization techniques to get the reconstruction of image.
1. Introduction Monte Carlo techniques1 are used to study the evolution and study state behavior of phenomenon, which are essentially stochastic in nature. Simulation of propagation of NIR light through tissue using Monte Carlo method is a conceptually simple technique. Photon packets are launched from the source and as this traverse through the medium, if the packet hits the position which is appointed as a detection point, photon packet is logged into a result matrix. Eventually, when a large number of photons have been detected, the average path length traversed can be obtained from the distribution of actual path lengths traversed, obtained from the detected photons. In practice, however a number of difficulties arise, all of which have their origin in the computationally time consuming nature of Monte Carlo method. Since we are only interested in photons that actually hit the detector, a lot of computation done is waste. The faction of photons that contribute depend on the optical properties2 of the simulated medium and the geometry, the distance between the source and the detector, but under very favorable conditions this fraction is no more than 1:100 which means that the total number of photon paths that have to be calculated is typically several millions for good results. As the distance of detector increases, the number of detected photon packets decreases rapidly. At some distance it is no longer useful to perform calculations, because the statistics become very poor and uncorrelated. Computation can be decreased by taking advantages of symmetries. In case of cylindrical geometry, if the homogeneity is taken co-axial with the background (in 2-D, concentric circles), at each angle, same data can be used. The finite size of detector has also to be considered. The simplest way of implementing detection is to assign detector status to a certain pixel, and thus making the detector size equal to the pixel size. It is tempting to make detector size large, in order to obtain a higher faction of detected photons. In reality, detector will be determined by the diameter of optical fiber used. 2. Monte Carlo Method Light beam is considered to consist of many packets of photons that behave like particles subject to scattering and absorption3 in tissue. The path of each packet is traced until it escapes from the medium, and a large number of packets are launched so that the statistical averages (such as mean, variance, autocorrelation) etc. are consistent, goingfromone estimate to other, and are meaningful. 2.1 Photon Initialization Monte Carlo begins by launching a photon packet into the tissue. The size of this packet is called weight (W) of the photon. Its initial weight is set to unity. The photon s initial direction is chosen downwards into the tissue. The coordinates of the photon are identical for all photons. At each step, some portion of the packet of photons would be absorbed and so the weight reduces after every step.
19
20
2.2 Generating Step size The simplest Monte Cario method propagates each photon with fixed incremental step sizes. The fixed step size As must be small relative to the average mean path length of a photon in the tissue. The mean free path length is the reciprocal of the total attenuation coefficient4. (2.2.1) As — = ft
H.+H,
Where /J,,M, a n d / i a als ^c t o t a l attenuation, the absorption and the scattering coefficients respectively. If the step size is too small the photon will rarely interact with tissue and the Monte Carlo method will be inefficient, conversely if the step size is too large, the distance traveled by a photon is a poor approximation to that of an actual photon traveling through tissue. A much more efficient method chooses a different step size for each photon step. The probability density function5 for the step size follows Beer's law 6(i.e. it is more likely for a photon to travel a short distance than a long distance and the probability that the step size is As is proportional to ^n,^3 ). A function of random number § uniformly distributed between zero and one which yields a random variable' with this distribution is:
A,
.
(2- 2 - 2 )
_>!fe) M,
The stepsize As found using equation (2.2) represents the distance that a photon will travel before interacting (through absorption or scattering) with the tissue.
2.3 Changing Photon Direction When the photon interacts with the tissue, it gets scattered to a new direction, in addition to weight loss owing to absorption. The new direction in 3-D is defined by two angles, one an azimuthal and the other longitudinal. Following Mie theory8 a normalized phase function9 describes the probability for these azimuthal and longitudinal angles for a photon when it is scattered Scattering in time is characterized by the so-called Henyey Greenstein phase function10, which gives the azimuthal angle as: OOS0
1 2g
1+X+r
l-g
(2.3.1)
l-g+2g£]
Where g is called anisotropic factor" and for tissue its value is taken nearly equal to 0.9. If scattering is isotropic12 (g — 0 ) , the following equation for azimuthal angle is used cosO
2f-l
(2.3.2)
21
I
»• -
—
•
-
\»»«
-
/
g-0
/
~~^- —
;
2.4 Moving the Photon The moving photon is uniquely described by three Cartesian coordinates for spatial position and the three direction cosines for direction of travel. For a photon located at (x,y,z) traveling a distance in the direction specified by the direction cosines14, the new coordinates are given by: y
=
x
+
M*-&3
y
=
y
+
ti,Ja
z'
=
z
+
/*,-AJ
( 2 -4.1)
In 2-D Monte Carlo method, for cylindrical geometry, the photon is traced in 2-D plane. So location is specified by (x,_y) and for moving the photon from location (xi, J ] ) to(x2,.V2)> ^ ^ size and angle of scattering is generated. The new location is given by: xi y2
= =
n + ^cosff y, + ,scos0
(2.4.2)
2.5 Photon Absorption After each propagation step, the photon packet is split into two parts, a fraction is absorbed and the rest is scattered. The fraction of the packet that is absorbed is: fraction
absorbed=^S. ft
^a_ fa+fs
=
x
^s fa + fs
x_a
(2-5.1)
Where a is called albedo constant Consequently, a new photon weight W is given by , which represents the traction of the packet that is scattered in this step. An absorption event requires both the location and the amount of light absorbed be recorded. For example, the appropriate element of the absorption matrix is incremented by (l-a)W .The number of bins in the absorption matrix is determined by spatial resolution required. Increasing the number of entries increases the spatial resolution, but also increases the computation. 2.6 Photon Termination The weight of photon packet will never reach zero and propagating a photon with very little weights yields no useful information. But if we discard all the photons when their weight drops below a specified
22
minimum (e.g. 0.001), violates energy conservatioa The Roulette technique gives such photons (of weight W) one chance in m ( eg 10) of surviving with a weight mW or else its weight is reduced to zero. So the photon is terminated in an unbiased fashion without sacrificing energy conservation and without continuing propagation until its weight has reduced to zero. 3. Simulation Result As a result of simulation, following temporal point spread function is obtained The TPSF is obtained for all the source and detector positions and for all the orientations which is used by non-linear optimization techniques for reconstruction of image
t20B
|
BOP
000
400 -
Sw
»•
«o
«
sw
so*
too
References: [1] Malvin Kalos and Paula A- Whftlock. Monte Carlo Methods Volume 1: The Basics. Wiley, New York,
1986.
[2] W. F. Cheong, S. A. PrahL, and A. J. Welch, "A Review of the Optical Properties of Biological Tissues," IEEE J. Quantum Electronics, 26,2166-2185 (1990) [3] Simon R Arridge and Jeremy C Hebden, Optical imaging in medicine: II. Modelling and reconstruction, Phys. Med. Biol. 42 (1997)841-853. [4] K.R. Czerwmski, M. FoDcert, W. Thilly and E. Gostjeva, Towards a Scientific Basis for Estimatmg Expected Health Effects from Low Radiation Exposures Nuclear Engineering Department, MIT Center for Environmental Heafth Sciences, MTT [5] B P Flannery, SA Teukolsky and WT Vetterling, Numerical redpies in C, Cambridge University Press. [6]. F Alberto Graubaum and Jorge P Zubelli, Difiuse Tomography: Compu&ional aspects of the isotropic case, Inverse Problems (1992), 421-423. [7]. S A Prahl, M Keijzer, S L Jacques, A J Welch, A Monte Carlo method of light propagation in tissue, SPIE Institute series, Vol. IS 5 (1989). [8]. S R Arridge, M Cope, D T Delpy, The theoretical basis for the determination of optical path lengths in tissue: Temporal and frequency analysis, Physics in Medicine and Biology, 1992, Vol. 37, No.7,1531-1560 [9]. R. A. Forester and T. N. K. Godfrey, "MCNP—a general Monte Carlo code for neutron and photon transport,"m Methods and Applications in Neutronics, Photonics and Statistical, pp. 33-47, New York: Springer-Verlag, 1983. [10]. Y Yamada, light Tissue interaction and optical imaging in Biomedicme, Annual House, Inc, 1995.
Review of Heat transfer, Vol. 6, Begell
[11]. Stephen T Flock, Michael S Patterson, Monte Carlo modeling of light propagation in highly scattering tissue-I: Model predictions and comparison with diffusion theory, IEEE Transactions on Biomedical Engineering, Vol 36, No. 12, December 1989. [12]. M. Mrwa and Y. Ueda, "Development of time-cesolved spectroscopy system for quantitative noninvasive tissue measurement," in Optical Tomography, Photon Migration, and Spectroscopy of Tissue and Model Media, B. Chance and R.R. Alfano, eds., Proc. SPIE, voL 2389, pp. 142-149,1995.
PREDICTING MATERIALS PROPERTIES USING FIRST PRINCIPLES ELECTRONIC STRUCTURE CALCULATION
Y. P. FENG, A. T.-L. LIM, AND J. C. ZHENG Department of Physics, National University of Singapore 2 Science Drive 3, Singapore 11754.2 E-mail:
[email protected] Ab initio electronic structure theory has achieved a considerable level of reliability concerning predictions of structures and properties of materials. It provides understanding of matter at the atomic and electronic scale with an unprecedented level of detail and accuracy. The state-of-the-art ab initio electronic structure calculation methods based on the density functional theory and local density approximation is reviewed briefly and their applications in solids is illustrated using C3P4 as an example. Motivated by the success of first principles method in predicting properties of C3N4 and related materials, we use the density functional theory and pseudopotential method to explore the possibility of forming C3P4 crystal and to investigate its properties. Our calculations predict that the structure of C3P4 is quite different from that of similar material such as C3N4 and the pseudocubic structure is extremely stable compared to other possible structures. Our calculation also indicates that C3P4 can be possibly metallic or a narrow gap semiconductor.
1
Introduction
It has been almost a century since quantum mechanics was developed. This revolutionary theory is the foundation of modern physics and is indispensable to the understanding of atoms, molecules, atomic nuclei, and aggregates of these. Although quantum mechanics could in principle allow us to solve for any system but direct application of quantum mechanics to real materials was difficult because analytic solutions of the Schrodinger equation were only possible for a few simple systems such as a square potential well, a harmonic oscillator and the hydrogen atom. This was summarized by Dirac in his famous statement, The underlying physical laws necessary for the mathematical theory of a large part of physics and the whole of chemistry are thus completely known, and the difficulty is only that exact application of these laws leads to equations much too complicated to be soluble. In the next half century following the establishment of quantum physics, various approximation methods were developed. However, direct solutions of the Schrodinger equation for real materials were impossible. It was not until the mid 1960s before an important break-through was finally made by Hohenberg and Kohn 1 and Kohn and Sham 2 who developed the density functional theory (DFT). Hohenberg and Kohn proved that the total energy, including exchange and correlation, of an electron gas (even in the presence of a static external potential) is a unique functional of the electron density. The minimum value of the total-energy functional is the ground-state energy of the system, and the density that yields this minimum value is the exact single-particle ground-state density. Kohn and Sham then showed that it is possible to replace the many-electron problem by an exactly
23
24
equivalent set of self-consistent one-electron equations. An very important effect of a many-electron system is the exchange and correlation, and it is extremely difficult to calculate the correlation energy of a complex system. D F T provided some hope of a simple method for describing the effects of exchange and correlation in an electron gas. However, direct applications of D F T to real materials were still limited until the 1980s due to the demanding requirement on computational resources in order to solve the Schrodinger equation self-consistently for a given system. In the 1980s, it was the emergence of efficient algorithms and advances in computing power that finally made the direct applications of electronic structure calculation to real materials feasible. Noticeable algorithmic improvements included the molecular dynamics method by Car and Perrinello 3 , and direct minimization of the Kohn-Sham energy functional proposed by Payne et al.4. First principles calculation using DFT and particularly the local density approximation have proved to be a reliable and computationally tractable tool in materials science. It is now possible to simulate systems containing 100 or more atoms in a unit cell. The main advantage of the first principles method is that it requires no experimental parameters. Therefore, it is very powerful in predicting properties of new materials and is ideal for study of new materials. 2
D e n s i t y Functional T h e o r y
For a non-relativistic many-electron system, the Kohn-Sham total-energy functional for a set of doubly occupied electronic states ipi can be written as E[{^i}]
= 2^2
J in
+y /
V2Ad3f+
- ^
^^]??
J
+ Exc[n(r)}
Vion(r)n(r)d3f +
Eion[{Rr}]
where Elon is the Coulomb energy associated with interactions among the nuclei at positions {Ri}, V\on is the static total electron-ion potential, Exc is the exchangecorrelation functional, and n(f) is the electronic density given by
n(r-)=2£>,(r0|2. i
The D F T variational principle yields the Kohn-Sham equation h2 2m ^
+
^on(^
+ V
" ^
+
Vx0
^
where ipi is the wave function of electronic state i, £i is the Kohn-Sham eigenvalue, and VJJ is the Hartree potential of the electrons given by J
\r-f'\
The exchange-correlation potential, Vxc is given formally by the functional derivative
= "WO! xcy
'
6n(f)
25 The Kohn-Sham equations must be solved self-consistently. But one problem is that the exact exchange-correlation functional is not known. For realistic calculations, various approximations were used. The simplest of such approximations is the local-density approximation (LDA) proposed by Kohn and Sham 2 . It is constructed by assuming that the exchange-correlation energy per electron at a point f in the electron gas, exc(r), is equal to the exchange-correlation energy per electron in a homogeneous electron gas that has the same density as the electron gas at point f. T h a t is Exc[n(r)]
= /
eXc(r)ri(r)d3r.
The LDA has been remarkably successful in describing the ground-state properties of a large range of physical systems. 3
P r e d i c t i n g S t r u c t u r e s and P r o p e r t i e s of Solids
One very important application of the first principles electronic structure calculation is to predict the structural form of a material. This involves calculation of the quantum-mechanical total energy of the system and subsequent minimization of that energy with respect to the electronic and nuclear coordinates. Because of the large difference in mass between the electrons and nuclei and the fact that the forces on the particles are the same, the electrons respond essentially instantaneously to the motion of the nuclei. Therefore, the nuclei can be treated adiabatically, leading to a separation of electronic and nuclear coordinates in the many-body wave function, or the Born-Oppenheimer approximation. According to the molecular dynamics method, a Lagrangian which includes the positions of the ions and the coordinates that define the size and shape of the unit cell as dynamical variables can be defined. The force on an ion can be calculated following the Hellmann-Feynman theorem 5 , 6 . Local energy minima of the ionic system can be located based on the Hellmann-Feynman forces. The ions are moved along the directions of the Hellmann-Feynman forces, for each ionic configuration, a self-consistent electronic structure calculation is carried out to quench the electrons to the Born-Oppenheimer surface. The forces on the ions are calculated again and the procedure is repeated, until the residual forces on all the atoms become smaller than a given tolerance. By performing this zero-temperature quench from a variety of initial configurations of the ionic system, one can obtain information about the local energy minima of the system. But there is no guarantee that this will locate the global energy minimum of the system. While there is no systematic procedure to find the global energy minimum for a given system, other information about the system may be useful for determining the structure of the system. For example, there may be a finite number of possible structures for a given system and the structure corresponding to the global energy minimum can be identified by comparing the total energies of all possible structures. Once the structure of the system is determined, other properties such as electronic property, optical property, etc. can be computed from the self-consistent electronic density.
26
4
Structure and P r o p e r t i e s of H y p o t h e t i c a l C3P4
As an illustration of materials science problems that can be investigated by ab initio electronic structure calculations, we present a study of hypothetical alloy C3P4 7 . Motivated by the success of first principles electronic structure calculation in prediction of super hard C3N4 8 ' 9 ' 1 0 ' 1 1 , we decided to investigate the structure and properties of a similar compound, C3P4. C3P4 can be obtained by substituting N for P in C3N4. Since both C and P are group V elements in the periodic table, one can expect C3P4 to have properties similar to C3N4. Trend analysis of related materials suggests that C3P4 could have a wide band gap and could be a relatively hard material. Nevertheless, it is of interest to know whether C3P4 can form a stable alloy. And if it does, what is the possible structure? What physical properties does it have? Five possible structures were considered with stoichiometry C3P4. They are Q-C3P4, /3-C3P4, cubic-C3P4, pseudocubic-C3P4 and graphitic-C3P4 (see Figure 1). We have performed ground state total-energy calculations using the pseudopotential plane-wave method based on density-functional theory in the local density approximation for exchange and correlation. The Vanderbilt ultrasoft pseudopotentials were used. The wave functions are expanded into plane-waves up to an energy cutoff of 310 eV. Special k points generated according to Monkhorst-Pack
(a)
(b)
(d)
(c)
(e)
Figure 1. Unit cell of (a) a - C 3 P 4 , (b) /3-C 3 P 4 , (c) graphitic-C 3 P 4 , (d) cubic-C 3 P 4 , and (e) pseudocubic-C 3 P 4 . The C atoms are shown using small spheres while the P atoms are shown using large spheres. All structures are fully optimized within the preselected space groups.
27 scheme 1 were used for integration over the irreducible wedge of the Brillouin zone for the various structures. Appropriate numbers of points were used to achieve good convergence. We also optimized each crystal geometry within the preselected space groups. Results obtained from our calculation were surprising. Unlike C3N4, the calculations predict that pseudocubic-C3P4 is energetically favoured relative to other phases. In particular, OJ-C3N4 and /9-C3N4 are the stable phases for C3N4 but aC3P4 and /J-C3P4 are unstable. The stability of the pseudocubic phase of C3P4 is quite exceptional, the total energy per C3P4 unit of pseudocubic-C3P4 is almost 2 eV lower than that of the next most energetically favoured structure, i.e. o>C3P4. Not only is the pseudocubic phase exceptionally stable, it also has the smallest volume per C3P4 unit and therefore the highest density among all the phases investigated. This implies that it is impossible for pseudocubic-C3P4 to undergo a phase transition under pressure. There may be other high-pressure phases of C3P4 besides the five structures investigated here. One possible candidate for a higher pressure phase, the defect /3-Sn structure, was investigated. However, no stable structure was found with a volume smaller than the equilibrium cell volume of pseudocubic-C3P4. Therefore, it is concluded that there is no pathway for phase transition from the pseudocubic phase to other structural forms under pressure. The calculated total energies are fitted to fourth order polynomials and the bulk modulus for each structure is then determined. It was found that the pseudocubic phase also has the highest bulk modulus of 203 GPa. We have also investigated the electronic properties of the various phases of C3P4. It was found that within the LDA approximation, C3P4 is metallic. Even though it is known that LDA underestimates band gap, the overlap between the lowest conduction band and the highest valance band is almost 2 eV and correction of the band gap by other method may not be able to completely remove this large overlap. We therefore also conclude that C3P4 is metallic or at most a narrow gap semiconductor. References 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
P. Hohenberg and W. Kohn, Phys. Rev. 136, 864B (1964). W. Kohn and L. J. Sham, Phys. Rev. 140, 1133A (1965). R. Car and M. Parrinello, Phys. Rev. Lett. 55, 2471 (1985). M. C. Payne, M. P. Teter, D. C. Allan, T. A. Arias, and J. D. Joannopoulos, Rev. Mod. Phys. 64, 1045 (1992). H. Hellmann, Einfuhrung in die Quantumchemie, (Deuticke, Leipzig, 1937). R. P. Feynman, Phys. Rev. 56, 340 (1939). A. T.-L. Lim, J. C. Zheng, and Y. P. Feng, Int. J. Mod. Phys. B 1 6 , 1101 (2002). M. L Cohen, Phys. Rev. B 32, 7988 (1985). A. Y. Liu and M. L. Cohen, Science 245, 841 (1989). A. Y. Liu and M. L. Cohen, Phys. Rev. B 4 1 , 10727 (1990). D. M. Teter and R. J. Hemley, Science 2 7 1 , 53 (1996). H. J. Monkhorst and J. D. Pack, Phys. Rev. B 13, 5188 (1976).
CORRELATION OF THE DISTRIBUTION OF ESSENTIAL/TRACE ELEMENTS IN HUMAN HAIR FOR LUNG CANCER DIAGNOSIS Pei-Lin Mao", Kelly Kueh Hui-Lee", Alan Ng Wei Keong*, Yee-Tang Wang*, and Ping Wu° 'Institute of High Performance Computing, 1 Science Park Road, #01-01 The Capricorn, Singapore Science Park II, Singapore 117528, Tel: 6419-1522, Fax: 6778-0522. Email: Kelly®ihpc.a-star.edu.sg *Tan Tock Seng Hospital, Department of Respiratory Medicine, 11 Jin Tan Tock Seng, Singapore 308433
Objectives of the study were to correlate essential/trace elements in human hair in patients with lung cancer and control subjects, and to develop a model that can be applied to test subjects to determine the probability of having lung cancer. However, concentrations of hair essential elements can range varied due to different sample preparation methods and calibration standards. We applied a unified testing procedure for all hair samples to prevent the limitations in hair study. Furthermore, by using an in-house developed artificial intelligent software package (APEX), pattern recognition analysis of 19 essential elements in hair was performed to elucidate a clear picture for the relationship between cancer and non-cancer patients. A computer model was developed based on the levels of the selected essential/trace element for patients diagnosed with lung cancer as well as for non-cancer control groups. This study determined that certain essential/trace elements were strongly correlated to lung cancer, which can be remarkably distinguished from the control group. Future studies linking the contributions of these elements to the carcinogenesis of tumours are expected. Thus, the interrelationship of multiple essential elements in hair may be used as a diagnostic tool for lung cancer. Thus, it may set up the ground for further research and development of a new screening technique for the medical industry.
1
Introduction
Lung cancer remains the most common causer of cancer death in the world. It is account for about 30% of all cancer deaths in the United States. In the past few years, in Singapore, it is the major cause of cancer in men and the third most frequent cancer in women. Between 1988 and 1992, there were over 4,000 people diagnosed to have lung cancer in Singapore. More than 80% of lung cancer cases are related to smoking. About 85% of men and 75% of women died on lung cancer because of smoking. Other important causes of lung cancer include exposure to asbestos and Radon. It is, however, fairly rare in people under the age of 40, partly because it takes many years to develop. The average age of people found to have lung cancer is 60. Lung cancer represents a major health problem worldwide. Most lung cancers begin to grow silently, without any symptoms. Patients with lung cancer often do not develop symptoms until the cancer is in an advanced stage. Surgery, chemotherapy, and radiotherapy have all been utilized in the treatment of lung carcinoma. If lung cancer is found and treated early, before it has spread to lymphnodes or other organs, the five-year survival rate is about 42%. It is therefore, vital to identify the causes, in order to diagnosis and earlier prognosis of the disease.
28
29
Study of cancers using hair samples has been done years ago, and, chemical analysis on the hair sample had shown that the trace elements in human hair has been correlated to the diagnosis of various diseases [1]. In this paper, a screening technique of lung cancer by hair chemistry and the in-house developed artificial intelligence software APEX, as well as, commercial software SPLUS is introduced (3). This screening technique has been shown successful in diagnosing prostate cancer (2). Further study has also been carrying out on gastric cancer using this technique. A total of 100 hair samples were collected at a local hospital in Singapore. 43 healthy normal were collected as control group and 57 lung cancer patients were collected as cancer group. Each hair sample is to be 3 to 5cm long, with a total of about 0.3gms of hair were cut and collected from the occipital region, near the scalp of the head, of each patient. Chemical analysis on each hair sample was carried out and done carefully beforehand. Twenty hair trace elements are extracted from chemical analysis of these hair samples. The analytical data consists of 100 selected patients, with a response, Target, which was recorded as presence or absence of lung cancer and the 20 hair essential elements of Al,
As, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, P, Pb, Se, Sr, V and Zn.
2
Analysis
The analysis was carried out at the following steps: 1. Exploring the raw analytical data. There are several approaches; one can use a simple histogram to view the distribution of the data and a scatter plot to seem the strength of the relationship between two hair trace elements. 2. Fitting a raw model. Often, we will need to normalise the raw data before fitting a null model, especially at the case where the variation among the trace elements are differ widely. A raw logistic regression model is fitted to the dataset (4). Model diagnosing was then carried out before a final prediction model has chosen. •
Checking for outlying points. The presence of outliers and high influential points can be graphically detected by checking the residuals and fitted values plot, and the leverage-residual plot. A potential outlying point has been detected, i.e., sample 16, and, several possible outliers, i.e., sample 21, 71, 57, 59, 31, 41, 63, 23 and 66.
•
Goodness of fit test. The goodness of fit was accessed by calculating its p-value and the pseudo- R .
•
Significant test for the hair trace elements on the model fitted. A smaller submodel with significant elements will fitted, and, goodness of fit test will carried out to check for the adequacy of the model.
30
3.1 The models We have developed several models. The goodness of fit of few most important models is listed in table below. MODEL
P-value
Pseudo- R 52.54% 63.79% 64.82% 62.08%
Null 2nd 3rd Sub (from 2nd)
Table 1. Goodness of fit and pseudo- R
0.87405 0.99602 0.99339 0.99864
for some important models.
The base model has a completed dataset of sample size of 100. The 2nd model has a sample size of 99 with sample 16 being deleted from the dataset, whereas, the 3rd model has all the outlying points mentioned above, being removed from the dataset. All of these three models have the 20 hair trace elements as of its explanatory variables. The submodel has 13 explanatory variables with a sample size of 99, after deleted sample 16. It is a submodel derived from the 2nd model. 3.2
Final Model Behavior
The predicted model, logit P = a + AlpAi + ASPAS + CaPca + CdPcd + CoPco + CrP& + MnpMn + NapNa + NiPwi + Ppp + PbpPb + SePse + SrPsr where P is the estimated probability of having lung cancer and a, P are the regression coefficients.
Lung Cancer Prediction Model
1.2 1 -
«M»4O,«*
* •
^
,«*»
«•»
«M>4 « • •
.
>0.8
•
J 0.6-
%•
• • • •-
•
•
•
•
o °-0.4-
•»
• *
0.2 -
k
•• <
* •#
o3
20
« - * 40
-
* 60
Samples
80
100
120
• Cancer s False cancer
si Control » False control
31 3
Conclusion
From the Table 1, the goodness of fit suggests the submodel is a better prediction model with p-value of 0.9986. The test for significant terms from the predicted model suggests that hair trace elements of Al, Ca, Cr, Ni, P, Pb, Se and Sr are highly significant. Thus, were also saying that these hair trace elements extracted from the hair sample are important in contributing to the lung cancer development. From the figure, the false cancer and false control are samples predicted wrongly from the model compare against the experimental data. The specificity and sensitivity of the predicted model is 88.10% and 91.23% respectively. The ambiguity zone has 15 samples fall between probabilities 0.4 to 0.6. If we exclude these samples, the probability of predicting lung cancer is fairly good, at about 95%. The four wrongly predicted results from the model, in compare with the experimental data, could be due to several reasons, such as data-entry error, or perhaps, those are patients with potentially higher chance of getting lung cancer. Further investigation and diagnosis on these patients are encouraged.
References 1. Wang, X. R., Zhuang, Z. X., Zhu, E., Yang, C. L., Wan, T. and Yu, L. J. (1995) Multielement ICP-AES Analysis of Hair Samples and a Chemometrics Study for Cancer Diagnosis. Journal ofMicrochemical 51, 172-181. 2. Wu P, Heng KL, Yang SW, Chen YF, Mohan RS and Lim PHC. A screening technique for prostate cancer by hair chemical analysis and artificial intelligence. Lecture Notes in Artificial Intellignece 1620, Subseries of Lecture Notes in Computer Science, Springer-Berlag Berlin Heidlberg 1999;372-376. 3. Selvin S. (1998) Modern Applied Biostatistical Methods using S-Plus. Oxford University Press, New York. 4. Demaris, A. (1992) Logit modeling : practical applications. Sage Publications, California. 5. Heine H. H. (1995) Lung cancer : advances in basic and clinical research. Kluwer Academic, Boston. 6. Retherford, R. D. and Choe, M. K. (1993) Statistical models for causal analysis. Wiley, J., United States.
DYNAMIC SIMULATION OF AN ANAEROBIC DIGESTION PROCESS USING ORTHOGONAL COLLOCATION ON FINITE ELEMENTS METHOD T. T. LEE AND P. WU Institute of High Performance Computing, 1 Science Park Road #01 -01 The Capricorn Singapore Science Park II Singapore 117528 E-mail:
[email protected]
This paper addresses dynamic simulation of an attached-growth anaerobic digestion process treating industrial wastewater. A new partial differential equation (PDE) model of the anaerobic digestion process developed based on a recent work on lumped parameter approach for the same process by Bernard et al. (Biotech. Bioeng, 2001) is presented. Our simulation model was developed on the basis of gPROMS process simulation package (http://www.psenterprise.com) which allows studies on a wide range of practical operational problems such as plant start-up, plant shutdown and hydraulic shock loads. Numerical simulation on an industrial case study using advanced numerical techniques showed that the new model is able to explain the process behaviour more accurately than the conventional approach.
1.
Introduction
Anaerobic digestion processes have been employed for the treatment of sewage, industrial wastewater or mixture of both to degrade organic wastes to methane (CH4) and carbon dioxide (CO2). It has a reputation of being difficult to operate and prone to process instability due to external disturbances such as hydraulic, organic or toxicants shock loads. Physically, a fixed-bed anaerobic reactor consisted of a fixed-bed of solid support structure or media inside a large cylindrical vessel. Wastewater passes through the bed from bottom of the vessel, reacted with biomass immobilised on the media and finally comes out of the effluent channel above the media continuously (Fig. 1). Much effort in mechanistic modelling of the anaerobic treatment systems has been concentrated on improving the reaction kinetics [1] but hydraulics of the reactors has often been overlooked. Existing mathematical models largely assume ideally mixed reactors [2] with no concentration gradients on species within the reactor, which could give erroneous results when simulated. In this work, a new partial differential equation (PDE) model for the attached growth anaerobic digestion process will be formulated followed by development of a numerical algorithm for simulation of the process based on the orthogonal collocation (OCFE) method described by Lee et al. [3]. The model will be validated using a pilot-scale experimental study on an industrial wastewater treatment. 2.
Model development and numerical algorithm
We considered only eight basic components present in the three-phase (solid-liquid-gas) system. We assume two bacterial species form the solid phase ie acidogenic bacteria (XO and methanogenic bacteria (X2). For liquid phase, we assume there are four components ie COD (SO, VFA (S2), inorganic carbon (C) and total alkalinity (Z) and for gaseous phase we have CH4 and C0 2 . Kinetics of Bernard et al. [2] is adopted in this work. The following assumptions are considered: (1) X] consumes COD to form C0 2 and VFA. (2) In the second step, X2 consumes VFA to form CH4 and C0 2 (3) For hydrodynamics, only axial convection and backmixing of the liquid are considered. (4) Biomass is attached to the media with a small fraction detached continuously. (5) The fluid physical properties are constant and (6) Identical Peclet number (Pe) for S t , S2, C and Z. Justification for this
32
33
assumption is detailed in Lee et al. [4,5]. Based on the model assumptions, we have formulated a complete set of mass balance equations for the three-phase fixed-bed anaerobic digestion system. An example of the PDE model for COD and acid-forming bacteria is given as follow: 1 d>S, ^ ) Pe
dt
kl/ilXl'^=,,^l-aDXl-Mi=Mm-T^-
' ^ ' dt
"'"' — >'•
r
™Sl
+
K, si
(1)
where \ii is growth rate of X} and Pe, kh KSi and a are constants and D is influent flow per unit volume of reactor. The OCFE method has been applied to solve PDE problems in the environmental process engineering systems [3]. The OCFE model for Eq. (1) is given as: t
"l.(t-IXAf-tl)<-j _ ^ frw
" ^
! . ( * - ! ) ( Af-UK j i
U
• pe
' . ^
w
V< D C 2-. °j,i-Jl.(k-lX1<-l)<-i
_ y ~ A*i,(*-i)(A'+i)+y i,(*->)(iv+D+y
s
i,(t-ixAr^iHj
^1,(*-1XW+1)+/
3.
("max-,, "\(*-l)(JV+l)+y +
A
_ V J ? ,I Z j /1y,/-'5l.(*-lxAr-i-l)t/||
n y U A / A
F. y " l A ' u i - l X A ' t l ) * ; ^ i,<*-ix AT * ] ) • . /
w h e r e i,(t-ixAr+i)+y
, A: = 1,.., JV£+7 and j = 2,.., N+2
(2)
„ X1
Computational strategy for process simulation
In this study, we employ gPROMS package version 2.1.1 [6] running under SUN Solaris 7.0 Unix operating system for all our process simulation work. We set error tolerance for all dynamic simulations to le-4. The OCFE model is cast into a differential-algebraic equation (DAE) problem and solved using gPROMS's default Backward Differentiation Formulae (BDF) solver [6]. From a previous study [3] it was shown that three finite elements and four internal collocation points are sufficiently accurate for numerical simulation of reactor systems in the environmental engineering. Consequently, this result is implemented in this work. Pe, representing the reactor hydraulic is arbitrarily choosen as 0.1 while all other parameters follows Bernard et al. [2]. We first compute the steadystate process conditions and solve for the states and algebraic variables of the various species within the reactor. These steady-state values become the initial conditions for dynamic simulation of the process. We then introduce a step change of+ 15 percent at day 15th to the influent COD, VFA, pH and flowrate and simulate over a period of 100 days. For model validation, we apply the computational algorithm to model a pilot-scale system of Bernard et al. [2] treating industrial wine distillery vinasses at their pilot-scale facility in LBE-INRIA in Narbonne, France. The main equipment i.e. reactor of their experimental set-up is essentially similar to Fig. 1. All kinetic data and reactor geometry used in their study will be re-employed for model validation. We performed a trial and error procedure to estimate the 'best' value of Pe. Concurrently, we recalibrate some of the constants such that steady-state values of the species at outlet of the reactor are similar to their pilot-scale experimental results 4.
Results and discussions
Dynamics of COD and CH4 at various axial positions are shown in Fig. 2. Evidently, the results showed that there is a significant distribution in the dynamics of gas species (full results not shown) along the reactor that cannot be otherwise captured by lumped parameter models. It is observed that the step test results in step increases of COD, VFA and pH along the reactor. This additional nutrients in the system causes growth rate and
34
hence concentrations of biomass to be increased (results not shown). Increased in the growth rate of X2 in turn results in more CH4 production, which is assumed to be proportional to the rate of methanogenesis reaction. On the other hand, concentration of C0 2 dropped due to the relatively large (by a factor of four) increased in the total alkalinity of the system compared with the increased (by a factor of three) in the inorganic carbon concentration. There is no observed axial variations in the alkalinity of the system since it does not take part in the reactions. An appropriate value of Pe was identified to be 0.005 and constants related to C0 2 and CH4 (k4, k5 and ke) are identified to be 42.17 mmol C02/1, 229.07 mmol C02/1 and 226.5 mmol CH4/I respectively. Fig. 3 shows the patterns of diurnal variation of flow rate, COD, VFA and pH used in the simulation. Fig. 4 shows the simulation results for COD, VFA, Z and C compares with the experimental data at the reactor outlet. Evidently, the PDE model prediction of the species dynamics are in good agreement with the experimental data throughout the 70 days except for the peak in VFA concentration close to the end of the experimental period. The latter may be attributable to the relatively slower reaction towards overloading of VFA in the model than the process itself such that the accumulation starts less rapidly in the model. The peak in COD dynamics at day 50 of the experimental data is not accounted for in the PDE model. It is uncertain if this peak represents the actual process behaviour since there is no corresponding increase in the inlet COD load. Fig. 4 also shows that there is a significant bias in the dynamics of total alkalinity and inorganic carbon compared with the experimental data, attributable to the uncertainty in the measurement of the inlet alkalinity by Bernard et al. [2]. Figure 5 shows that simulation results for CH4 and C0 2 flow rates and pH are well predicted, compared with the on-line measured experimental data at the reactor outlet. At day 25, the model over predict the pH drop during the destabilisation phase (days 21 to 25) and is attributable to the underestimation of the alkalinity of the system [2]. Results of this study may be further improved if more complex kinetics model which include other identified bacterial species and radial distribution of the biomass are considered. 5.
Conclusions
A generalised computational algorithm based on the OCFE approach has been developed for modelling fixed-bed anaerobic digestion process. We showed in this work that the PDE model is able to predict distribution of species along the reactor for Pe over and above 0.1 that cannot be otherwise captured by lumped parameter models. It is also demonstrated in this study that the proposed algorithm is able to give good prediction of the dynamics of species of interests in a pilot-scale study of an industrial wastewater which is operating at near completely mixed hydraulics. 6.
References
1. Masse, D.I. and Droste, R.L. (2000) Comprehensive model of anaerobic digestion of swine manure slurry in a sequencing batch reactor. Wat. Res. 34(12) 3087-3106. 2. Bernard, O., Hadj-Sadok, Z., Dochain, D., Genovesi, A. and Steyer, J.P. (2001) Dynamical model development and parameter identification for an anaerobbic wastewater treatment process, Biotechnology and Bioengineering, 75(4), 424-437. 3. Lee T.T., Wang, F.Y. and Newell, R.B. (1999c) Dynamic simulation of bioreactor systems using orthogonal collocation on finite elements. Computers & Chemical Engineering 23, 1247-1262.
35
4. 5. 6.
Lee T.T., Wang, F.Y and Newell, R.B. (1999a) Dynamic simulation of activated sludge process using orthogonal collocation approach. Wat. Res. 33(1), 73-86. Lee T.T., Wang, F.Y. and Newell, R.B. (1999b) Distributed parameter approach to the dynamic of complex biological processes. AIChE Journal 45(10), 2245-2268. gPROMS Introductory User Guide rel. 2.1.1, Process Systems Enterprise, U.K. 2002
Figure 1. Schematic of a fixed-bed anaerobic digestion reactor
%uz '•• —
"*'—
i f\
Figure 2. Results of simulated step change 54J
i s "8
—i
r
t 2
_
•"•
, - - • " -
R101.ZETfi_INt.2>
Figure 3. Diurnal variations of Bernard etal. [5]
Figure 4. Validation of PDE model with experimental data of Bernard etal. [5]
TOTAL ALGEBRAIC SYSTEM IDENTIFICATION FOR HOMOGENEOUS CATALYZED SYNTHESES OF FINE CHEMICALS (ALKENES TO ALDEHYDES) EFFENDI WIDJAJA, CHUANZHAO LI, AND MARC GARLAND Department of Chemical and Environmental Engineering, 4 Engineering Drive 4, National University of Singapore, Singapore 117576 E-mail: chemvg® nus.edu. sg In this paper, a thorough and rigorous total algebraic system identification is performed as a starting point before kinetic studies on a chemically reactive system. Based on the in-situ spectroscopics measurements and knowledge of the amount of initial reagents put inside the reactor, all meaningful (observable) algebraic information needed for subsequent kinetic modeling are extracted. Successful application to a homogeneous catalyzed synthesis of a fine chemical (alkene to aldehyde) is also presented.
1
Introduction
In the chemical sciences today, both in academic and industrial research environments as well as in chemical manufacturing, spectrometers play a very important role. They are the true centres, which generate much of the chemical information used. Accordingly, effective methods to analyze the data and to maximize the amount of extracted physically and chemically meaningful information is of considerable importance. Imagine a simple situation in which a reactive system is created by introducing a certain amount of reactants and/or catalyst(s) into a liquid phase batch reactor. A spectrometer is employed on-line to record signal attenuation as a function of frequency. Furthermore, since the reaction requires minutes or hours to complete, a time-series of spectra is collected. The spectra contain information concerning the time dependent concentrations of the reactants, intermediates, and products. Such data arrays, obtained from sequential spectral measurements, may often be 100s of megabytes in size or more. Briefly, there are three primary goals that we would like to develop and to investigate in this current study in order to achieve what we called 'Total Algebraic System Identification". These three goals are: 1. Goal I: Determine the number of observable species s and reactions r present in the synthesis using the spectroscopy measurements alone. 2. Goal II: Obtain the pure component spectra of all the observable species a sxv - also by using the spectroscopy measurement alone. 3. Goal III: Given data on the amount of reagents put into the reactor, determine all the reaction stoichiometrics v rxs , the extents of reactions ^keXr, and the time dependent moles of all observable species N te)Ct . These are prerequisites to other subsequent steps such as the modeling of reaction kinetics and rate constant determination. We develop our approach by taking a total soft-modelling path. Such an algebraic system identification is the necessary starting point for later rigorous solution of the differential inverse problem (classic inverse problem in chemical kinetics) in order to determine the kinetics and reaction rate constants. (Deuflhard, 1983) [1]
36
37
2
Total Algebraic System Identification
Let Akexv represent the consolidated preconditioned1 [2] spectroscopic matrix, where k denotes the number of spectra in one batch experiment, e denotes the number of experiments, and v is the number of data channels associated with the spectroscopic wavenumber range. Atexl/ can be assumed as a linear combination of cell-path length \keXkl,, concentration matrix CteX!and the pure component spectra matrix a i x „, where s denotes number of observable species in the chemical mixture, and experimental and instrumental error, E kew . Goal I & II Singular value decomposition (SVD) was performed to decompose the data matrix A haa, yielding the orthonormal matrices U and V , and the diagonal singular value matrix E. The BTEM approach performs spectral reconstruction one-spectrum-at-a-time [3,4]. Based on an exhaustive search of the prominent spectral features seen in the V T vectors and targeting them one by one as part of the BTEM algorithm, all pure component spectra of observable components are reconstructed. By using this approach, the number of observable components are thereby determined. Goal I & III Before the goal III analysis, an important re-normalization of the spectroscopic data must be first performed. The aim is to eliminate the dependence of the spectroscopic data on volume and cell-path length variables. This re-normalization is done using an internal standard approach resulting in a matrix A ^ [5]. According to the Jouguet-De Donder equation, the change in moles of the observable species corresponds to the extents of reactions and the reaction stoichiometrics. Therefore after some mathematical manipulation, a new equation describing the change in the measured spectroscopic data can be written as follows. ADml - (A Dml T - E "•kexv
V^kexv)
;;
a
~ b kexr "rxs asXV
CT\ \^>
In order to determine the first estimate of the number of observable reactions, the matrix of l A t e ^ - ( A t e t r ] i s subjected to SVD. This is followed with statistical test (Malinowski F-test) on the resulting diagonal singular matrix. This estimate will later be confirmed by the target-transformation factor analysis approach. Since the reconstructed pure component spectra obtained from goal II are in normalized form, a diagonal weighting matrix dsxs is required to quantify the time dependent moles for the observable species. This diagonal matrix is obtained using a material balance model, in which the sum of squares error minimization between the estimated N*CXE and the initial reaction condition N fex£ is utilized. NkexE is the time dependent moles of elements or chemical groups. Nkexs
=
A-kexv LHJXV 1 (.** jxi /
N t e x £ = Nfaa, VsyE
(3) (4)
1 The role of preconditioning is to properly subtract signals from known components, i.e. vapour phase CO2 and moisture, dissolved CO in solvent, as well as solvent. The preconditioning algorithm is based on entropy minimization. Details can be found in reference [11].
38
MinG = X S ( N f c > < £ - N ^ ] ke
E ^
,~ (-'J
w-r.t dsxs Next, the mole changes for observable components AN kexs are calculated and are subjected to SVD. AN^x, = ukexkeLkeXS VIX( (o) Since physically meaningful reaction stoichiometries lie in the vector spaces spanned by the rows of V T , target transformation factor analysis can be used to check whether the target reaction stoichiometries are compatible with the observation spaces. If the target stoichiometry is consistent with the observations, the target and transformed stoichiometries are identical. The target stoichiometries can be obtained/deduced from chemical reasoning or from an approach proposed by Yin (1990) [6] . Since the mole changes were obtained from a linear combination of the extents of reactions and the reaction stoichiometries, the extents of reaction can be calculated. & * , = AN feX! [y rx J + 3
(7)
Experimental Section
The homogeneous catalytic hydroformylation of 33DMB was performed using Rh4(a-CO)9(|0.-CO)3 as catalyst precursor in n-hexane solvent and high pressure in situ infrared spectroscopy was used as the analytical tool. A total of 6 experiments were conducted in this study. During each experiment, a total of 30 - 36 reaction spectra were recorded at regular intervals (a few minutes) in the FTIR wave number range 1000 - 2500 cm"1. The resolution was 4.0 cm"1 and the data interval was 0.2 cm"1. 4
Results and Discussions
Goal I & II SVD was performed to decompose the preconditioned absorbance data matrix A 158x4751> anc^ subsequently BTEM was used to reconstruct the pure component spectra of all observable species. Spectral reconstruction parameters and the identities of resolved pure component spectra are presented in Table 1 and Figure 1 as follows. Table 1. Spectral Reconstruction Parameters and Species Identities # # V1 vectors, Wavenumber Maximum Species Species z region (cm1) Abs, a Identification* 1. 15 1640-1644 1 33DMB 2. 15 1733-1735 1 44DMP 3. 15 1885-1887 3 Rh4(a-CO)9(u-CO)3 4. 18 2020-2023 1 RCORh(CO)4 5. 100 1720-1726 1 2M33DMB 6. 100 2075.5-2077 1.5 Rh4(o-CO)12 7. 50 1818-1820 5 Rh6(CO)16 *44DMP = 4,4-dimethylpentanal; 33DMB = 3,3-dimethylbut-l-ene; 2M33DMB = 2-methyl,3,3-dimethylbutanal
39 i 0.5
.A 1600
A
S p ec les 1
A
. 1700
1000
i
1900
2000
1600
1100
1700
1
S p e c le S 3 0.5
1700
1S00
1S00
1900
2000
Speclei 6
1
A 1600
Species 5
jJl
1900
S p ecle » 4
2000
|
L ^
2100
1600
1700
'
(
0.5
1S00
1900
2000
Speclei 7
MAJL 1600
1700
1800
1
0 1600
1700
2000
2100
4^ 1600
-A_ 1700
1BO0
1
1000
2000
. 2100 A
Species 2
A
O.S
1900
2100
1
•
0
2100
J
1800
1000
2000
2100
la. Major Species lb. Minor Species Figure 1. The Reconstructed Pure Component Spectra via BTEM for Both Major and Minor Species (Ordinate: Normalized Absorbance; Abscissa: Wavenumber)
Goal I & HI SVD was performed on [Af^-(A^)**J matrix, and subsequently the resulting singular values of X matrix were subjected to Malinowski's F-test. The F-test showed that there are two significant factors. It inferred that at least two overall and observable reactions were present. Since pure component spectra of all observable species can be resolved, the associated chemical groups present in these species can be established. The chemical groups were employed to set up a material balance model. Solving Eq. 5 using Corana's SA will provide the optimum values of the weighting matrix dSM . In the first attempt to obtain d I)ct , both major and minor species were included in the optimization. Because these minor species (2M33DMB, Rh4(o"-CO)i2, and Rh6(CO)16) have very low concentrations, the multiple linear regression sensitivity of these species on the absorbance data is also very low. In the regression and optimization process, the d jxt values corresponding to these species were unstable and their values kept changing. Hence, in the second attempt, these species are not included in the optimization anymore. Upon obtaining the optimum dIXI from the second attempt, the time dependent moles of these major species can be generated by a pseudo-inverse calculation (Eq. 3). These moles are presented in Figure 2. S1DHB
^L
KW>VV
r//>// Figure 2. Moles Profiles for Four Major Species (Ordinate: Moles; Abscissa: Mixture Number)
40
Next, AN kexs was calculated and was subjected to SVD. Two target stoichiometrics were proposed and were projected onto the observation space V ^ . Accordingly, the target stoichiometrics in matrix form are as follows. ~-l 0 0 1~ (0,a - 4 - 1 4 0 The projected stoichiometrics in matrix form are also shown as follows. I \ _ T -L000° -0-0014 -0.0003 1.0000' \VrxJ
projected ~
_4 QQQQ
-Q.9209
4.0182
0.0002
(8)
(9)
The sum of squares error between target and projected stoichiometrics for the 1st and 2na reactions are 2.07E-6 and 6.6E-3 respectively. Therefore, it can be concluded that the target vectors are the true reaction stoichiometrics observed in this current system. Upon obtaining reaction stoichiometrics, the extents of reactions were calculated using Eq. 7, and the results are presented in Figure 3.
Figure 3. The Extents of Reactions for l sl and 2nd Reactions. (Ordinate: Moles; Abscissa: Mixture Number)
5
Conclusion
Total algebraic system identification was successfully performed on the homogeneous rhodium-catalyzed 3,3-dimethylbut-l-ene hydroformylation reaction using in-situ FTIR spectroscopy. The algebraic chemical information retrieved included the number of observable species and reactions, the pure component spectra of observable species, time dependent moles, reaction stoichiometrics, and extents of reactions. Thus, subsequent kinetic studies can proceed. References 1. Deulfhard P. and Hairer E., Numerical treatment of inverse problems in differential and integral equations. (Boston, Birkhauser, 1983) 2. Chen L. and Garland, M., The use of entropy minimization for the preconditioning of large spectroscopic data arrays. Application to in-situ FTIR studies from the unmodified homogeneous rhodium catalyzed hydroformylation reaction. Applied Spectroscopy (2002) In Press. 3. Widjaja E., Li C.Z., and Garland M., Semi-batch homogeneous catalytic in-situ spectroscopic data. FTIR spectral reconstructions using Band-Target Entropy Minimisation (BTEM) without spectral preconditioning. Organometallics. 21 (2002) pp. 1991-1997 4. Chew W., Widjaja E. and Garland M., Band-target entropy minimization (BTEM): An advanced method for recovering unknown pure component spectra, application to the FTIR spectra of unstable organometallic mixtures, Organometallics 21 (2002) pp. 1982-1990. 5. Chew W. Ph.D. Thesis, National University of Singapore (in progress). 6. Yin, F, Some linear characters in chemical reaction systems. Ind. Eng. Chem. Res. 29 (1990) pp. 34-39.
N U M E R I C A L S O L U T I O N OF B O U N D - C O N S T R A I N E D NONLINEAR SYSTEMS IN CHEMICAL ENGINEERING S. BELLAVIA, M. MACCONI, B. MORINI Dipartimento
di Energetica
"S.Stecco", University of Florence, via C. Lombroso 6/17, 50134 Florence, Italy E-mail:bellavia<3ciro.de.unifi.it, macconiSde.unifi.it,
[email protected] Solving systems of nonlinear equations with bounds on the variables is an important issue in the field of scientific and engineering computation. A promising numerical method for bound-constrained nonlinear systems has been recently proposed by the authors. In this paper, the new procedure is tested using a variety of benchmark problems arising in chemical process modeling. Numerical results demonstrate the effectiveness of the method.
1
Introduction.
Very frequently, systems of nonlinear equations model a variety of process simulation problems and an essential aspect for determining a reliable solution is to enforce constraints on the variables. 2 ' 7,8 This fact can be motivated as follows. Often, the physical solutions of real-life problems are expected to lie in a certain area. For example, many problems admit solutions with positive (non negative) components. Adversely, the nonlinear systems which model the problems are prone to the existence of "spurious" solutions, that is solutions that have no physical meaning. Hence, we are urged to restrict the domain by putting suitable "physical" constraints on some or all of the variables. Moreover, constraints on the variables are imposed either to take into account the domain of the nonlinear mapping if it does not coincide with the whole space or to remove discontinuities of the nonlinear function. These constraints can be denoted "absolute" constraints 8 . In the context of solving constrained nonlinear systems there is no loss of generality considering the bound-constrained problem F{x) = 0 ,
x £ n = {x € M n
s.t.
I < x < u},
(1)
where F : X -> R n , fi C X C B " , and the vectors / € (IRU-oo)", u e (HUoo) n are specified lower and upper bounds on the variables. In fact, a problem consisting of a nonlinear system F(x) — 0, nonlinear inequality constraints and variable bounds can be stated as (1) by using bounded slack variables. We are interested in the methodologies for solving (1) which are explicitly designed for nonlinear systems and whose computational effort is not significantly affected by the presence of the bounds. Several issues arise and among them we recall the enforcement of the constraints and global convergence properties. Protection against the violation of the bounds can be enforced by heuristic strategies. For example, positivity can be enforced by clipping strategy, i.e. negative components are put to zero, or by replacing the negative components by their absolute values 7 . These ad hoc approaches can work well for certain applications, but cannot systematically account for bounds in a general way. Regarding global convergence, techniques specifically designed for (1) must be
41
42
considered since classical globally convergent methods for unconstrained nonlinear systems are unsuited. In practice, the existence of spurious solutions can adversely affect the performance of numerical algorithms and most numerical methods, such as globalized Newton method, will converge to spurious solutions as readily as to meaningful solutions. Further selecting a starting point in the general vicinity of a physical solution is no guarantee of avoiding a spurious solution. A wide variety of techniques have been introduced to address this problem: see eg. homotopy methods 4 ' 8 linesearch methods 5 ' 6 , trust-region methods 1 , 1 0 , interval Newton methods 3 . The authors have recently proposed a new afnne trust-region method for solving bound-constrained nonlinear systems and analyzed its convergence properties. 1 This method combines the classical trust-region procedure for nonlinear systems with a suitable afnne scaling technique for constrained optimization problems and generates a sequence of iterates strictly feasible, i.e. belonging to the interior of fi. The merit function used for the globalization strategy is f(x) = ||F(x)||2/2. The scaling is determined by the nearness of the current point to the boundary and handles the bounds. In fact, it allows to take steps which are angled away from the bounds. This feature overcomes the occurrence where the steps point directly to a nearby bound and convergence is lost. The afnne trust-region method has three relevant characteristics. First, since the generated iterates lie in Q, it avoids infeasible solutions and can deal with problems where F is undefined outside Q. Second, its convergence to a point of fl that solves (1) is global in the sense that it does not depend critically on the choice of the initial guess. Third, it has the ability of converging quadratically to a solution of (1) that lies in the interior of fi. Extensive numerical experiments 1 demonstrated the effectiveness of our method and showed that it provides a unifying framework for handling variables subject to physical and absolute bounds. 2
Reliable solution of nonlinear s y s t e m s
We applied our affine trust-region method in the solution of 45 benchmark problems belonging to the recent web-based library 9 denoted NLE (NonLinear algebraic Equations). Specifically, we focused on the library problems having dimension larger than one. The collected problems are classic and include chemical reaction equilibrium, pipeline flow, flowsheeting, steady-state material and energy balance on a reactor, reaction rate equations and free energy minimization. Several problems feature poor-scaling and ill-conditioning. None of the bounds is active at the known solutions. The Difficulty Level of the problems is classified as Low (LDL), Average (ADL), High (HDL). 9 The number of problems belonging to these classes is 16, 12 and 17, respectively. Each problem is supplied with several initial guesses and the number of resulting tests is 152. Many of the supplied starting points are not in the vicinity of the solutions. Thus, the considered tests allow to assess the robustness and reliability of our method. Note that the number of the tests associated with the Low, Average, High difficulty problems are 54, 37, 61 respectively.
43
8i
•
•
.
.
1
120
Figure 1. Robustness and computational cost of the affine trust-region method.
The conducted numerical experiments were performed using double precision, i.e. e m ~ 2.10 - 1 6 . Convergence to a solution of (1) was declared if the function value of F satisfies the tight stopping criterion: \\F\\2 < 1 0 - 8 . In this case, the final iterate can be considered safely as an approximation to a solution of (1). Further, the computed solutions were compared with those reported in the library. Much attention was paid to detect convergence to a minimum of the merit function / which is not a zero of F. Obviously, in these cases the procedure is considered to fail. In the sequel we summarize some of the results obtained. From the numerical results our method seems to be robust. The first plot in Figure 1 shows this feature. On the x-axis, problems are numbered from 1 to 45 using the problem list 8 . For each of them, the dotted line displays the number of tests to be performed. Hence, it represents the "ideal" performance of a numerical method. The solid line shows the number of tests we successfully solved for each problem. In fact, on a total of 152 tests our procedure solved 121 tests. We failed to solve two high difficulty level problems named 9 "Poorly scaled chemical equilibrium problem" and "Modeling of a CSTR for a complex sequence of reactions-original form" for all the provided starting vectors. Specifically, for these problems the supplied tests are 4 and 3, respectively. More insight into the problems, we report the percentage of solved tests within each level of difficulty. Our method succeeded 94% of the time for the tests of LDL problems, 84% of the time for the tests of ADL problems, 64% of the time for the tests of HDL problems.
44 The remaining plots in Figure 1 show the computational cost of our method. In particular, for each problem we considered the tests successfully solved and computed the average of iterations and F-evaluations performed. Computational cost due to the evaluation of the Jacobian matrix F' is not included but we stress that one Jacobian-evaJuation is required at each iteration. The graphs distinguish among the level difficulty and indicate the average number of iterations by a dashed line and the average number of F-evaluations by a solid line. On the s-axis, the problems are indicated as follows. From the total of 45 problems, we extracted 3 subsets of problems corresponding to the three level of difficulty. Then within each subset, we started from 1 and indicated the problems by a progressive number on the base of the order used to list the problems in the library. Most of the problems are solved very efficiently with our method: the average number of F-evaluations required is less than 20 for 34 problems, between 20 and 80 for 5 problems and larger than 100 for the problems denoted 9 : "Consecutive reactions in a CSTR" (LDL test), "Three stage, two component distillation column" (ADL test), "Pipe diameter calculation for specified pressure drop", "Pipe flow velocity calculation for a specified pressure drop" (HDL tests). Summarizing, our method seems to be an effective solver for bound-constrained nonlinear systems. For this reason, we intend to develop a Hatlab code that will be accessible through the web. This code will have the following characteristics: — reliable testing for successful runs; — diagnostic information in case of failure; — capability of accessing whether a minimum for the merit function / was computed. Acknowledgments Work supported by MIUR, Rome, Italy, through "Cofinanziamenti Programmi di Ricerca Scientifica di Interesse Nazionale". References 1. S. Bellavia, M. Macconi and B. Morini, Appl. Numer. Math. , to appear (2002). 2. L.G. Bullard, L.T. Biegler, Computers Chem. Engng. 15, 239 (1991). 3. C.Y. Gau, M.A. Stadtherr, Computers Chem. Engng. 26, 827 (2002). 4. F. Jalali-Farahani, J.D.Seader, Computers Chem. Engng. 24, 1997 (2000). 5. C. Kanzow, Numer. Math. 26, 135 (2001). 6. D.N. Kozakevich, J.M. Martinez, S.A. Santos, Comput. Appl. Math. 16, 215 (1997). 7. Meintjes, A.P. Morgan, ACM Trans. Math. Softw. 16, 143 (1990). 8. M. Shacham, Int. J. Numer. Meth. Engng. 23, 1445 (1986). 9. M. Shacham, N. Brauner, M. B. Cutlip, Computers Chem. Engng. 26, 547 (2002). 10. M. Ulbrich, SIAM J. Optim. 1 1 , 889 (2000).
PHONON DISPERSION, STRUCTURE STABILITY, SURFACE RELAXATION, AND SURFACE ENERGY FOR METALS Ni, Cu, AND Pd Jun Cai Institute of High Performance Computing, 1 Science Park Road, Singapore 117528
[email protected] Jian-Sheng Wang Singapore-MIT Alliance and Department of Computational Science, National University of Singapore, 119260 wangjs @ cz3. nus. edu. sg A simple analytical embedded-atom potential (phys. stat. soli b203, (1997)) is used to calculate phonon dispersions, surface energies, surface relaxation, and structure stability of fee metals Cu, Ni, and Pd. The calculated surface energies and surface relaxation are found to be in reasonable agreement with experimental data. The fee structure is also predicted to be preferred to the hep and the bec structure in energitics for these metals. Finally, the phonon dispersions of Cu, Ni, and Pd are calculated and in extremely good agreement with experimental results.
1. Introduction Atom interaction potential is very important for molecular dynamics or Monte Carlo simulation in materials science. In the past ten years, a kind of empirical many-body potential, called embedded-atom potential, has been developed for fee metals[l-8]. Of these many-body potentials, some are at non-analytical form[l-3] and others are the nearest neighbor model [4-6]. A non-analytical model is inconvenient in use while the nearest neighbor model does not include a long-range force. Recently, a simple analytical many-body potential model with a long-range force has been developed and used to study the theoretical strengths and structure phase transformation of Al, Ag, Au, Cu, Ni, Pd, and Pt[7,8]. This potential has also been extended[9] to study Si surface adsorption, diffusion, and reconstruction. The simulated results are in agreement with ones from first principal calculations or experiments[10]. Although so, the potential is not used to study the structure stability, phonon dispersion, surface relaxation, and surface energy, yet. However, it is some important to study these phenomena for testing the reliability of a many-body potential. 2. Theory and method In the theoretical framework of the embedded-atom method, the total energy of a N-atom system can be written as[l]
£10(=X^(A-)+^5>,y(^)
U>
where fairy) is a two-body potential between atom i and j with the separation distance r,;, FfiPi) is the embedded energy of atom i with the electron density pt due to all its neighbors. The formulas above are at the general form of the embedded-atom method. For the different models of embedded-atom potentials 0(r), and F(p) have different forms. In Daw et al's model[l], Ft(p) and
45
46
function of host electron density. More recently Johnson and Rosato et al give an analytic nearest-neighbor model for fee metals[4,5]. Baskes' model is complex in its form[6]. Present model is an analytical potential model and include a long-range force[8]. It is used to study surface relaxation and phonon dispersion, and structure stability of Ni, Cu, and Pd. The potential parameters are obtained directly from Ref.[ 8]. Table 1. The structure stability of Cu, Ni, and Pd.
Efcc-Ebcc(eV) Efcc-EhcD(eV)
Cu 0.029 0.0009
Ni 0.042 0.0025
Pd 0.046 0.0015
3. Phonon dispersion, structure stability, surface energy, and surface relaxation The potential model is used to study the structure stability of fee metals Cu, Ni, and Pd by calculate the energy of fee, bcc, and hep (with ideal c/a ratio ) phases, where the bcc and the hep have the same magnitude of the atomic volume as fee does. The global stability is very important, it guarantee that any small perturbations do not lead to a spontaneous transformation to a different lattice structure. Therefore, the calculation of the cohesive energy of each structure can provide an important information to test the reliability of a potential. We calculate the cohesive energy per atom for the fee, the bcc and the hep. The results are listed in Table 1. From the table it is seen that in all cases, the fee structure is found to be energetically favored over the hep and the bcc structure, and the hep structure is energetically favored over the bcc structure. Thus, the present model is able to represent the structural stability quite well. Johnson's analytical nearest-neighbor model[4] and the model by Rosato et al[5] can not describe the structure stability.
[500]
[HO]
[550]
[t,m
Figure 1 The Phonon dispersion curve for Ni; solid line for the calculations and open circles for experiment[ll]. The present model is also used to calculate phonon dispersion curves for Cu, Ni, and Pd. The results for the [£00], [^0], [1^0], and [£££] directions are shown in Fig. 1. Since these curves have very similar shape for Ni, Cu, and Pd. Fig.l only shows the calculated results of Ni. The phonon dispersion curves have been also well known experimentally. For a comparison, the experimental results are also shown in Fig. 1. In the long-wavelength limit, the dispersion curves are directly related to the elastic constants, to which the functions were fit. In the sort wavelength limit, it can be seen that the curves for all of these elements have a shape very similar to that found experimentally,
47
although the actual degree of fit varies somewhat. The results are very good for Ni and Cu, good for Pd. The discrepancy of the maximum frequencies along [£00] direction between experimental and calculated values is smaller than 0.1, 0.1, and 0.7 THz for Ni, Cu, and Pd, respectively. This discrepancy given by Rosato et al are about 0.4, 0.5, 1.5 THz for these metals using the nearest neighbor many-body potential proposed by themselves[5].The present results are closer to the experimental than those of Rosato et al. Table 2. Surface energies(in the unit of ergs/cm2). The experimental data are obtainedfromRef. [5].
(100) (110) (111) Experimental (average face)
Cu 1295 1395 1219
Ni 1644 1775 1534
Pd 1134 1221 1042
1790
2380
2000
We have calculated the cohesive energies of the fee, the hep, and the bec, and the phonon dispersions for Cu, Ni, and Pd. The results are in reasonable accord with experimental data. Further, we investigate the multi-layer-relaxation of surfaces for these metals. At present, surface energy and geometry of the low-index faces, (100), (110), and (111) are calculated. The surface energy is the energy difference between the energy of a periodic slab of atoms and the energy of the same number of atoms in the bulk material. In all cases, the relaxation of each atom layer parallel to the surface is allowed to occur. This Table 3. Surface relaxation of the top-layer spacing Az's for the low-index faces(in the unit of nm%), where two numbers are given, the top number is the calculated values, and the lower number is experimental values from Ref. [5]. (100) Cu Az12
Az23
Ni
0.080
-0.020
-0.11
-0.32
-0.011
-0.0038
(110) Pd
Cu
-0.200
-0.140
0.0078
+0.17 Az34
-0.0013
-0.00035
-0.0032
Ni
(111) Pd
Cu
Ni
Pd
-0.285
-0.531
-0.039
-0.088
-0.186
-0.85
-0.87
-0.60
-0.07
0
0.013
0.038
0.070
-0.008
-0.002
0.006
+0.23
+0.30
+0.10
-0.025
-0.028
-0.037
0.0002
0.00006
-0.0033
-0.05
is performed by minimizing the total energy of the slabs. The slabs are sufficiently thick to guarantee that surface energies and geometry are independent of thickness. For a comparison, in the calculations we have not any effort to search for energetically favored
48
reconstruction. The embedded-atom potential is a good tool for the investigation of reconstruction, though. The surface energies obtained for the low-index faces of these metals are presented in Table 2, where the results from experimental data[5] are also included . It can be seen in the table that the close-packed (111) face has the lowest energy, followed by the (100) and (110) faces for all the cases. The trend is in good agreement with the experimental, although, the calculated values, compared with experimental data, are consistently too small. The corresponding calculations from other many-body potentials[2,5,7] also present very similar results to the present. Thus, this type of many-body potential model needs to be further improved for calculating surface energy correctly. The change in the interlayer spacing Az's computed for the relaxed surface geometry relative to the spacings for the truncated bulk geometry and the comparison between the theoretical results and experimental data are presented in Table 3. Note that, except for Cu (100) face, all the top-layer spacings show a small contraction. Further, the rougher (110) surfaces show a larger relaxation than the smoother (100) and (111) faces. In addition, for (110) surfaces the relaxation shows the oscillating behavior of contraction-dilationcontraction. These general features agree with the trends found experimentally[5], except for the case of Cu(100). 4. Conclusion In summary, an analytical many-body potential model with a long-range force is used to calculate the properties of surface relaxation, surface energy, structure stability, and phonon dispersions for metals Cu, Ni, Pd. It is shown that such a many-body potential model can describe correctly these physical properties of these metals, expect for the relaxed structure of Cu(100). The calculated results are in reasonable agreement with the experimental. A analytical many-body potential model is more convenient than a nonanalytical model in use. References 1 Daw M. S. and Baskes M. I., Phys. Rev. B29, 6443 (1984). 2 3
Foiles S. M., Baskes, M. I., and Daw M. S., Phys. Rev. B33, 7983(1986).
Voter A. F. and Chen S. P., Mater. Res. Soc. Symp. Proc. 82 175(1987). 4 Johnson R. A., Phys. Rev. B37, 3924(1988). 5 Rosato V., Guilope M., and Legrand B., Philos. Mag. A59, 321(1989). 6 Baskes M. I., Phys. Rev. B46, 2727(1992) 7 Cai J. and Ye Y. Y., Phys. Rev. B54, 8398(1996) 8 Cai J., Phys. Stat. Soli. B203, 345(1997) 9 Cai J., Phys. Stat. Soli. B212, 9(1999) 10 Cai J.and Wang J.-S., Phys. Rev. B64, 035402(2001), Inter. J. Modern. Phys. B 16, 621(2002); Phys. Stat. Sol. B223,773(2001) 11 Birgeneau R. J. and et al, Phys. Rev. 5A, A1359(1964).
ON THE DEVELOPMENT OF WEIGHTED TWO-BAND TARGET ENTROPY MINIMIZATION FOR THE RECONSTRUCTION OF PURE COMPONENT MASS SPECTRA HUAJUN ZHANG AND MARC GARLAND Department of Chemical and Environmental Engineering, 4 Engineering Drive 4, National University of Singapore, Singapore 117576 E-mail:
[email protected] YINGZHI ZENG AND PING WU Institute of High Performance Computiong, 1 Science Park Road, #01-01, The Capricorn, Singapore Science Park II, Singapore 117528 E-mail:
[email protected] A method is proposed, on the basis of a recently developed algorithm - Band Target Entropy Minimization (BTEM), to reconstruct mass spectra of pure components from mixture spectra. This new method is particular useful in dealing with spectral data with discrete features (like Mass Spectra). Compared to the original BTEM, which has been applied to differentiable spectroscopies such as FTIR, UV, RAMAN and NMR, the latest modifications were obtained through: 1. reformulating the objective function using the peak heights instead of their derivatives; 2. weighting the abstract vector V to reduce the effect of noise; and 3. using a two-peak targeting strategy (tBTEM) to deal with strongly overlapping peaks. A set of 50 multi-component mass spectra were generated from ten reference experimental pure-component spectra. Many of the compounds chosen have common MS fragments and therefore, many of the pure-component spectra have considerable intensity in the same data channels. Successful reconstruction of the ten component spectra was rapidly achieved using the new tBTEM algorithm. The advantages of the new algorithm and its implication for rapid system identification of unknown mixtures are readily apparent.
1
Introduction
In the chemical sciences, one is constantly challenged to identify pure components from mixtures and/or evolving reactive systems. Usually, one attempts to separate / purify the components for analysis, but such efforts are often time-consuming and sometimes not entirely effective. To date, many advanced combined analytical instruments, e.g. GC-MS, HPLC-MS and HPLC-NMR, have been used to perform separation and then spectroscopy. In other words, to obtain pure component spectra for the positive identification of species present. However, there are many types of situations were separation is difficult or even impossible (transient, reactive or labile species). As such, the reconstruction of pure component spectra from mixture data alone without separation and without relying on prior information is often required and has received considerable attention [1-2]. Over the past few decades, a lot of methods to resolve pure component spectra have been developed based on some sort of algebraic projection method e.g. SIMPLSMA [3-4], IPCA [5], OPA-ALS[6], but these methods frequently fail with strongly overlapping systems, and are unable to recover minor components. On the basis of an approach proposed by Sasaki et al [7], minimum entropy techniques have made considerable progress [8-10]. A new method called Band-Target Entropy Minimization (BTEM) [11,12] has been recently developed to recover observable components from an unknown mixture, including trace components that are difficult to identify by other methods. BTEM has been applied to real experimental systems with more than 10 species present and it has been successful in identifying pure component spectra from continuously differentiable FTIR and RAMAN. Mass spectral data presents new challenges. Recently, we re-examined the possibility of applying BTEM to mass spectral data to recover pure component spectra. The primary difficulties include the discrete nature of mass spectra, and the fact that fragmentation patterns can be rather similar due to the presence of many common fragments or adducts. Modifications of the original BTEM algorithm have now been performed to take into consideration the above mentioned characteristics of MS. This modified algorithm is called the tBTEM, emphasizing the two (rather than the single) peak/band targeting concept.
2
tBTEM
As mentioned before, tBTEM was developed on the basis of BTEM, an advanced spectral reconstruction algorithm. The three major modifications on the BTEM are present in this section and form the tBTEM algorithm.
49
50 2.1
Objective function for mass spectrum systems
The original entropy function usually uses Is', 2nd and 4th order derivatives but causes a problem with nondifferentiable discrete data like mass spectra. Therefore, it was suggested that the peak heights, and not their derivatives, be used to formulate the objective function for discrete data. It was also found that the use of normalized peak heights a lxv , worked just as well or better than the expression a lxv xln(ai xv ) as used in the BTEM, and required less computational time in evaluating the objective function. Specially, the following objective function was proposed, where the a and C denote the pure component spectrum and concentrations respectively. ) (1) The penalty function P is defined similarly to the BTEM algorithm. In comparison with the conventional entropy minimization, the objective function of Eq. (1) is simpler and thus requires less computational time. This modification achieves good results even for highly overlapped spectra data. 2.2
Weighted vectors VT
It is well known that the vectors VT, the right singular matrix of the Singular Value Decomposition (SVD), are ordered according to their contribution to the total variance of the observations. Therefore, the first few vectors are associated with real chemically important signals in the system and the rest are associated primarily with the random instrumental and experimental noise. It is noted that in the original BTEM algorithm, the choice of the number of the V vectors is not achieved by statistical tests, since nonlinearities are present. Instead, a very large number of vectors are chosen, more than the number of species anticipated in the system. If far too many vectors are chosen, and hence far too much noise is included, problems can be encountered during the optimization procedure. In the present work, we propose to multiply the entire V matrix with a set of weights, namely the diagonal matrix S that is readily available from SVD. By scaling the right singular vectors VT, the significance of the vectors associated with the real signals is increased and the effect of noise is reduced. Accordingly, it is less likely that optimization method becomes trapped in a local minimum. So it is less sensitive to the choice of the number of V T vectors. In particular, the estimated pure component spectrum is represented as below where T is the rotation vectors to be solved.
a-^T^xCS^Vl,) 2.3
(2)
Two-peak/band Targeting Entropy Minimization (tBTEM)
It is noted that in the BTEM algorithm, the estimated spectrum is normalized by the chosen band, which is often the highest peak of the spectrum. Since the targeted peak is used to retrieve the entire spectrum, the use of a higher peak would be advantageous due to the larger signal to noise ratio and the result is often less affected by the noise present. BTEM is usually successful in estimating pure spectra with the highest peaks. However, if strongly overlapping spectra are present at the highest peak, only the spectrum with smallest objective function value can be recovered while targeting at this peak. To deal with this challenge, a two-peak (band) targeting entropy minimization method (tBTEM) is proposed as below where a' and a' are the two targeted (usually the highest) peaks within the estimated spectrum. Permutations for different pairs of highest peaks provide a way to perform an exhaustive search for pure components spectra and makes it possible to recover most of the pure component spectra. In comparison with the BTEM algorithm, tBTEM is also less sensitive to the choice of the numbers of the VT vectors. a = a es '/[max(a') + max(a")]
3
(3)
Simulation Result
The performance of the tBTEM algorithm was examined with a set of simulated data. The simulated system was comprised of ten real organic components, namely ethanol, hexane, toluene, acetone, acetonitrile, cyclohexene, (CH3)2CHOH, acetic acid, CH2C12 and CH3CH2COCH3. Pure experimental / reference spectra of the ten components were obtained from GC-MS with the EI ionization method and a He mobile phase. Each spectrum spans M/e = 10 - 100 with data intervals of 1 M/e. This results in 91 channels. Fifty mixtures of the ten components were simulated with randomly generated non-negative concentrations for each mixture (arbitrary units, range from 0 to 100). Accordingly, a concentration matrix for the 50 mixtures
51 Csoxio was obtained. In order to make a meaningful simulation, all pure component spectra were first scaled to a maximum abundance of 10 (arbitrary unit). The mass spectra of the mixtures were simulated with Eq. (4) where P denotes the pure spectra of the ten components and e the noise matrix that was randomly generated with the level of 0 to 104. The low level noise is not so important for the conclusions as the goal of the present study is to examine the intrinsic capability of the new algorithm. It is noted that the simulated mixture data set is very complex with many strongly overlapping peaks, as many of the components have common functional group such as CH3-, CH3CH2-, CH3CO- etc and thus decompose into common fragments such as CH3 (M/e 15), CH3CH2 (M/e 29) and CH3CO' (M/e 43). ^ 5 0 x 9 0 ~~ ^ 5 0 x 1 0 * *10x91 """ ^50x91
W
In the following computation, all the objective function evaluations took the modified form of Eq. (1). The simulation and the spectral reconstruction by tBTEM were developed with the commercial mathematical software MATLAB 5.3 and run on a Toshiba laptop with Intel PHI 800MHz and 384M Ram. The computation times needed for every pure spectrum reconstruction varied from 3 minutes to 30 minutes depending on the number of V T used for targeting. The optimization algorithm employed in the tBTEM is Corana's Simulated Annealing [13]. 3.1
Comparison of the weighted and un-weighted VT vectors
In the present section, we compared the results of the estimated pure component spectra by using weighted and un-weighted V vectors. Fifty V vectors were used for both cases. It is found that the resultant spectra from the un-weighted VT are in general not acceptable. For example, the estimated cyclohexane spectrum (Fig. lc) does not resemble the real one (Fig. la). In contrast, the result was improved greatly when the 50 VT vectors were weighted by the diagonal matrix of SVD (Fig. lb). This test indicates that weighted VT vectors make the algorithm less sensitive to the choice of the number of V T vectors used. The weighting is very helpful in spectral reconstruction because the exact number (even a rough approximation) of components in a system is often unknown in advance. The weighting / scaling of VT clearly improves the results due to a better condition number. It should be further noted that if the weighting is not performed, then a rather accurate estimate of the number of species has to be known a priori. Otherwise, considerable optimization difficulties arise.
J ^i
ill J1L .ill J. ^ I
III.
, .In T
la: real spectrum. lb: by using 50 weighted V . Figure 1: The real and estimated cyclohexane spectra
3.2
Ilillii
lc: by using 50 un-weighted VT
Comparison of tBTEM and BTEM
Using the BTEM algorithm, a highest peak at some (M/e) is usually chosen for targeting and thus retrieving the entire spectrum. Under some circumstances, difficulties can be encountered when reconstructing pure spectra using its highest peak. Therefore, the choice of targeted peaks is a crucial but not a trivial task. Difficulties are encountered with BTEM if the highest peaks of two or more spectra are all located at the same channel (M/e). This arises since both the global and some of the local minima correspond to real pure component spectra. In BTEM, only the global minimum is kept and the local minima are discarded. As a result, only one spectrum will be recovered while the others will not be found. For instance in the present system, CH3CH2COCH3, CH3COCH3 (Acetone) and CH3COOH (Acetic Acid) have their respective highest peaks locating at M/e 43 due to the presence of the fragment of CH3CO . If the peak at M/e 43 was chosen, the resultant minimum objective functions were 2.9028, 3.5342 and 3.5388 for the three components respectively. The algorithm only retained the smallest, i.e. 2.9028 which led to the reconstruction of CH3CH2COCH3 spectrum, whereas the other two values corresponding to the solutions of CH3COCH3 and CH3COOH were discarded during the iteration of the algorithm. The tBTEM algorithm has the intrinsic ability to deal with this difficulty. By picking two big peaks (usually the highest two peaks) of a spectrum, tBTEM obtained the minimum objective function corresponding to the solution of one of the spectra. Then in another run, another pair of big peaks was used and this resulted in a new
52 solution leading to another spectrum. For instance, using the two peaks of M/e 43 and 58 resulted in the minimum objective function 2.0306 which led to the reconstruction of spectrum of CH3COCH3. Similarly, the choice of the two big peaks at M/e 43 and 60 resulted in the minimum objective function 2.0323 and thus the CH3COOH spectrum was recovered. Most importantly, in comparison with BTEM algorithm, tBTEM is less sensitive to the number of V T vectors used. For example, when an arbitrary number of 35 V vectors were used, the resultant spectra of hexane obtained from the BTEM (targeted at M/e 57) and tBTEM (targeted at M/e 57 and 86) are shown on the Fig 2c and the Fig 2b respectively. Clearly, the resulting spectrum from tBTEM resembles the real one (Fig 2a) while a higher level of noise is present in the spectrum from BTEM. The inner production of real and the estimated spectra from tBTEM and BTEM were 0.99366 and 0.95635 respectively, which again shows that tBTEM outperforms the single targeted peak algorithm. The improvement of the performance of tBTEM is probably due to the use of more spectral information, i.e. two peaks instead of only a single peak. The enriched spectral information facilitates the reconstruction of pure component spectra from highly overlapped mixture spectra.
....,
I jii J 1
1
,
,1 JI .J
.,1
.iiiiii.jli.ii, J Li.J niii.i. ii,
2a: Real spectrum; 2b: targeted at M/e 57 and M/e 86 2c: targeted at M/e 57 only Figure 2: Estimated hexane spectra using one-peak or two-peaks for targeting (35 VT used).
4
Conclusion and Discussion
In this paper, we proposed modifications on the advanced spectral reconstruction algorithm - BTEM. These modifications extend the utility of the algorithm to discrete spectroscopic data like mass spectra and improve the performance of the algorithm. By reformulating the objective function with the peak heights instead of their derivatives, the algorithm is able to reconstruct pure component spectra from mixture mass spectra. Furthermore, the algorithm is computationally efficient as fewer mathematic operations are needed for evaluation of the objective function (summation of abundance versus logarithmic expression). Weighting of the abstract VT vectors reduces the adverse effect of noise and the sensitivity to the number of V vectors chosen. As a result, the algorithm is more robust. A significant improvement in the reconstruction of highly overlapped spectra has been achieved by using the tBTEM algorithm where two peaks are used for targeting. This latter modification also makes the algorithm less sensitive to the number of used V vectors. The performance of the tBTEM algorithm was examined with a set of simulated spectra and has demonstrated its advantages in the spectral reconstruction. The successful use of the algorithm on real data has been completed and will be reported in a forthcoming paper.
References 1. 2. 3. 4. 5. 6. 7. 8. 9.
Lawton W. H. and Sylvestre E. A., Interactive self-modeling mixture analysis, Technometrics 13 (1971) pp. 617-633. Sylvestre E. A., Lawton W. H. and Maggio M. S, Curve resolution using a postulated chemical reaction, Technometrics 16 (1974) pp. 353-368. Windig W. and Guilment J., Interactive self-modeling mixture analysis, Anal. Chem. 63, (1991), pp. 1425-1432. Windig W., Spectral data files for self-modeling curve resolution with examples using the Simplisma approach, Chemometr. Intel!. Lab. Syst. 36, (1997), pp. 3-16. Bu D. S. and Brown C. W., Self-modeling mixture analysis by interactive principal component analysis, Appl. Spectrosc. 54, (2000), pp. 1214-1221 Sanchez F. C; Toft, J., Van den Bogaert B. and Massart D. L., Orthogonal projection approach applied to peak purity assessment, Anal. Chem. 68, (1996), pp. 79-85. Sasaki K., Kawata S., and Minami S., Constrained nonlinear method for estimating component spectra from multicomponent mixtures, Appl. Optics 22 (1983) pp. 3599-3603. Zeng Y. and Garland M., An improved algorithm for estimating pure component spectra in exploratory chemometric studies based on entropy minimization, Anal. Chim. Acta 359 (1998) pp. 303-310. Pan Y., Susithra L. and Garland M., Pure component reconstructions using entropy minimizations and varianceweighted piecewise-continuous spectral regions. Application to the unstable experimental system Co-2(CO)(8)/Co4(CO)(12), J. Chemometr. 14, (2000) pp. 63-77.
53 10. Widjaja E. and Garland M., Pure component spectral reconstruction from mixture data using SVD, global entropy minimization, and simulated annealing. Numerical investigations of admissible objective functions using a synthetic 7species data set, J. Comput. Chem. 23, (2002) pp. 911-919 11. Chew W., Widjaja E. and Garland M., Band-target entropy minimization (BTEM): An advanced method for recovering unknown pure component spectra, application to the FTIR spectra of unstable organometallic mixtures, Organometallics 21, (2002), pp. 1982-1990 12. Widjaja E., Li C. and Garland M., Semi-Batch Homogeneous Catalytic In-Situ Spectroscopic Data. FTIR Spectral Reconstructions Using Band-Target Entropy Minimization (BTEM) without Spectral Preconditioning, Organometallics 21, (2002), pp. 1991-1997 13. Corana A., Marchesi M., Martini C. et al, Minimizing multimodal functions of continuous variable with the 'simulated Annealing' algorithm, ACM Transactions on mathematical software, 13, (1987), pp. 262-280
COMPUTER AIDED ADDITIVES STUDY FOR STEEL HOT DIP GALVANIZING H.M.JIN, H.L.LIU, P.WU* Institute of High Performance
Computing, 1 Science Park Road, #01-01, The Singapore E-maihwuping @ ihpc.a-star. edu. sg
Capricorn,
This paper presents a fundamental study of additive effects on steel hot dip galvanizing. A combined approach of correlation method and quantum mechanical calculations was used to investigate the nature of additive behaviour. The general regularity, which reflects the distinct macroscopic behaviour of additives in galvanizing, was obtained through the study of the correlation among element properties, crystal structures and bulk additive properties. Two fundamental element properties, melting point (Tm) and pseudopotential atomic radii (Rs+P), were recognised as key factors to determine the bulk behaviour of additives. Based on the correlation study results, density functional theory (DFT) was attempted to further explore the mechanism of additive behaviour. A cluster model was employed in the simulation. The geometry configuration, bonding energy and charge distribution for different clusters were obtained, and the underlying mechanism of additives on zinc coatings was proposed. This study may provide an interesting approach for other materials design.
1
Introduction
When steel hot-dip galvanizing in a conventional non-alloyed zinc bath, serious problems will appear. The resulting zinc coating is too thick and brittle in addition to the dull and grayish appearance. This is due to the rapid reaction between Fe and Zn. The problem is even worse when steels contain more than 0.02 wt% of silicon: thick, brittle and uneven coating is produced, poor adhesion and marbled surface is appeared. Since the beginning of 1950s, the importance of additives in zinc bath was noticed [12]. Several additives and their alloying process were proposed. For example, it is known to control the reactivity of iron and zinc by adding aluminum into the zinc bath. However, the industrial application of aluminum additions has been limited because of the rather complicated surface preparation problem. In addition, for certain types of steels, rapid reaction between Fe and Zn are still observed even aluminum is added. The objective of this study is to obtain a scientific understanding of the mechanism of additives effect. Through a complete literature search, it was found that a clear understanding of the additive effect is still lacking at the moment. The large accumulated experimental data with unresolved theoretical problems encourage us to investigate the problem by a combined approach of correlation and quantum mechanical calculations.
2
Methodology
2.1 Correlation approach The basic idea of the correlation approach is to explore and establish easy-to-apply rules from analyzing large number of known candidates, and to extend these rules to unknown system for property and structure prediction. To apply the correlation approach on additive study, the first step was to collect all the additives information. A total number of
54
55
27 additives were found from literature [3-5]. Since the additives are added into zinc bath before the steel is dipped into, additive-zinc compounds may form. The formation of additive-zinc compounds may play an important role on the coating formation. Therefore, the correlation study mainly focused on the additive-zinc compounds. A total number of 76 binary additive-zinc compounds were reported [6]. These additive-zinc compounds were classified into two groups according to their corresponding additives behavior [7]: group 1 if their corresponding additive decreases the coating thickness, otherwise group 2. The correlation between element properties and additives effects on coatings were investigated through analyzing the patterns of 76 binary additive-zinc compounds. The inhouse-built artificial intelligence software was applied to establish the correlation. It was expected that the established correlation can provide basic information for further detailed DFT calculations.
2.2
Density functional theory calculations
Based on the correlation study, first principles calculations were performed on a few selected additives. A cluster model was employed to do the calculation. In previous research [8], it was found that most additive-zinc compounds have a common type of 12-14 coordinations. Therefore, to build the cluster model, the ratio of zinc to additive element was defined as 12:1. The geometric configuration of the cluster model was shown in Fig.l. The starting neighbor interatomic distance of the cubooctahedron was the sum of metallic radii of two atoms. The software Faststructure of MSI [9] was applied to complete the calculations. To obtain more accurate results, the highest accurate mesh item, FINE, in the software options is used for electronic integration. In addition, the electronic charge density is simultaneously optimized by using BFGS arithmetic with adequate convergence (force gradient <2xl0"3, charge gradient <4xl0"3 in atomic unit). 3
Results and discussion
3.1 Correlation study Table 1 lists all the possible additive-zinc compounds obtained from literature. A property number of PI or P2 is assigned to each compound according to its corresponding additive effect. For example, PI is assigned to a compound if its corresponding additive can reduce the coating thickness. Otherwise, P2 is assigned. By using two basic element properties [10] (melting point Tm and pseudopotential atomic radii Rs+P), a property map is established and displayed on Fig. 2. It can be seen that all class pi compounds are located within a downward-triangle zone, namely Z\. Most of the class p2 compounds are in a tetragon zone, namely 2%. Therefore class pi and p2 compounds are well separated in Fig.2, which leads to a simple correlation between galvanizing effects and constituent chemical element properties, melting point Tm and pseudopotential atomic radii Rs+P. Since the slope of a straight line through the origin has the same unit of a force, this suggests that diffusion may play a key role in both the galvanizing process and the formation of binary Zn-compounds.
56 Table 1 Additive-zinc compounds and the property number (P) Comp. Ag5Zn8 Ag5Zn95 AgZn Ce13Zn58 Ce 2 Zn ]7 Ce 3 Znn Ce3Zn22 CeZn CeZn n CeZn 3 CeZn5 CeZn2 CoZnu CrZn13 Cu2Zn98 CusZng Cu70Zn3o CuZn CuZn3
P p2 p2 p2 p2 p2 p2 p2 p2 P2 p2 p2 p2 p2 pl Pi Pl Pl pl pl
Comp. Nd 13 Zn 58 Nd 2 Zn 17 Nd 3 Zn n Nd 3 Zn 22 NdZn„ NdZn 2 NdZn NdZn 3 Ni3Zni4 Ni 70 Zn 30 NiZn 3 NiZn NiZn8 Pr13Zn58 Pr2Zn17 Pr 3 Zn„ Pr3Zn22 PrZn PrZn n
P p2 p2 p2 p2 p2 p2 p2 p2 pl Pl Pl Pl Pl p2 p2 p2 p2 p2 p2
Comp. Fe H Zn 3 9 Fe 3 Zni 0 Fe68Zn32 FeZn ]3 La 2 Zn ]7 La3Zn22 LaZni 3 LaZn5 LaZn Mg 2 Zn n Mg51Zn20 Mg 97 Zn 3 Mg4Zn7 MgZn2 Mn60Zn40 MnZn MnZni 3 MnZn 3 MoZn7
P Pl Pl Pl Pl p2 p2 p2 Pl Pl P2 p2 p2 p2 p2 p2 Pl Pl Pl Pl
Comp. PrZn 3 PrZn 5 Sni 7 Zn 3 Th2Zn ThZn 2 ThZn4 Th 2 Zn n ThZn9 TiZnl6 TiZn2 U2Zn17 TiZn 3 UZn 12 V 4 Zn 5 VZn 3 ZnZr2 ZrZn Zn2Zr Zn22Zr
Table 2 Bonding energy of M-Zn 12 clusters and the net charge on Zn AE/Kcal-mor 1 AE / Kcal-mol"' Charge of Zn 0.02974 -53.9655 MgZn12 NiZn12 -133.659 -84.7133 AgZn12 0.02741 -119.854 TiZn ]2 -60.8681 0.02588 VZn12 -106.048 SnZn12 * FeZn12: Bonding energy: -85.968 Kcal-mol , charge of Zn 0.02838
P P2 P2 P2 P2 P2 P2 P2 P2 Pl Pl P2 Pl P2 Pl Pl Pl Pl Pl Pl
Charge of Zn 0.00158 0.00089 0.00628
800 700 600 500 400 300 200 100 0 100
. .
-0.2
t
0.2
0.4
0.6
0
Pesudopotential atomic radius D
Fig.l Geometry configuration of the cluster model MZn]2 (M represents Ni, V, Ti, Fe, Sn, Ag, Mg and Zn, respectively)
Compounds of Pl * Compounds of P2
Figure 2. The correlation between Rs+P, Tm and two types of additive-zinc compound
57
3.2 Density functional theory (DFT) calculations To further understand the nature of additive behavior, electronic structure calculations are carried out. Additive Ni, Ti, V and Ag, Mg and Sn, which represent the group 1 and group 2 additives, are investigated with the cluster model. Geometry optimization of the cluster model is performed with DFT method. Table 2 shows the binding energy and charge transfer results. From Table 2 it can be seen that the effective additive has much stronger bonding energy than the non-effective additives. It is also stronger than that of Fe-Zn cluster. In addition, the electronic charges shift more significantly from the zinc atoms to the effective additives. Based on the above calculated results, the mechanism of additive effects is proposed as following: due to the stronger bonding between additive and zinc atoms, the diffusion process of zinc atom to form Fe-Zn alloys might be delayed so that the interfacial thickness of Fe-Zn alloys will decrease. In addition, since more electronic charges are shifted to effective additives, an "anti-iron wall" might be formed around zinc atoms, resulting in the slower formation of Fe-Zn alloys.
4
Conclusions
A combined approach of correlation and quantum mechanical calculations was employed to explore the nature of additive behavior in galvanizing. A property map was established through correlation study. Based on the correlation result, DFT calculations were further performed to study the underlying mechanism. An "anti-iron wall" mechanism was proposed to explain the nature of additives behavior.
References 1. Mackowiak, J. and Short, N.R. (1979), Int. Mat. Rev. 237 (1979):1. 2. Bablik, H. (1950), in Hot dip galvanizing, 3 rd edition, Spon, London 3. Sebisty, J.J. and Palmer, R.H. (1964), in Edited proceedings 7th international conference on hot dip galvanizing, Paris, p235. 4. Chen, Z.W., Kennon, K.F., See, J.B. and Barter, M.A. (1992), JOM, January, 22. 5. Horstmann, D. (1961), Edited proceedings 6th International conference on hot dip galvanizing, Edited by the zinc development association, 1961, p319 6. Villars, P. and Calvert, L. D. Pearson's handbook of crystallographic data for intermetallic phases, Imprint Metals Park, Oh: American Society for Metals, 1985 7. Jin H.M., Li, Y. and Wu, P. (1999). J. Mater. Res., 5,1791. 8. P. Wu.; H.M. Jin and Y. Li, Chem. Mater., 1999, vol.11, 3166. 9. MSI Cerius2, Molecular Simulations Inc.: San Diego, 1997. 10. Villars, P. (1994), In Intermetallic Compounds Principles and Practice, Volume 1Principles; John Wiley & Sons: New York, p227.
CATION-7C INTERACTIONS IN AG(I)-SUBSTITUTED NAPHTHALENE COMPLEXES : AN AB INITIO MOLECULAR ORBITAL STUDY H. M. LEE AND C. W. TSANG* Department of Applied Biology and Chemical Technology, Hong Kong Polytechnic Hung Horn, Hong Kong E-mail:
[email protected]
University,
(*contactperson)
Ab initio calculations have been earned out to study the binding site(s)/geometries and binding energies/affinities (enthalpy of binding) of Ag(I)-substituted naphthalene complexes, Ag+-Xnaphthalene (where X= H, Me, Et, Pr, OH, OMe, OEt, F CI, Br and I). The geometries were optimizeod at the MP2/3-21G(d) level and the binding affinities were calculated at the CCSD(T)/631+G(d) level. Our results show that Ag+ preferentially binds to the aromatic ring, and binding to alkoxy oxygen and halogen sites are not as energetically favorable. The Ag(I) affinity at OK of naphthalene (173 kJ mol 1 ) is -17 kJ mol"1 greater than that of benzene (157 kJ mol"1), indicating that both the quadrupole moment and polarizability of fused-benzene ring systems could greatly enhance the cation-rt binding energy. For electron-donating substituents X=H, Me, Et, Pr, OMe and OEt, the cation-7t binding affinities are found to increase and linearly correlate with the Taft's substituent polarizability parameter. However, for X=F, CI, Br and I, the Ag(I) -n binding affinities decrease to - 160 kJ mol"1, indicating that the electronegativity (electron withdrawing effect) of the halogen substituents exerts a pronounced negative (decreasing) effect on the cation-Jt interaction. Hence, by changing the substituents, the strength cation-Jt interactions can be manipulated and usefully utilized to the design new functional materials.
Introduction Cation-Jt interactions have been postulated to be a new kind of stabilizing (attractive) force important in molecular recognition and material design.1 Cation-TC interaction has also been exploited in the design of therapeutic agents against various aliments like myasthenia gravis, glaucoma, and Alzheimer's disease, and the design of aromatics 1 ^7
00
"^
collarenes for the separation of radioactive Cs and Sr from nuclear wastes. In this study, we have chosen the interaction of the Ag (I) cation with substituted naphthalenes as model systems to investigate (i) the characteristics features of cation-7t binding energies in fused-benzene systems , and (ii) the effect of substituents on competitive binding between cation-7t and non-7t binding sites and their binding energies/affinities. Theoretical Methodology Standard ab initio molecular orbital calculations have been carried out using the GAUSSIAN 98 package on SGI Indigo 2, Compaq XP900 and Intel Pentium 4 workstations. Geometries of the ligand (L) and Ag+-L complexes were first obtained at the HF level of theory with 3-21G(d) basis, and then the [HW, 3-21G(d)] basis. For heavy atoms such as silver, relativistic effects may not be negligible. Hence, apart from using the standard all electron 3-21G(d) basis for silver, we also employed the relativistic corrected effective core potential (RECP) of Hay and Wadt (denoted as HW)4. These optimized geometries
58
59
were then subjected to the frequency calculations at the same level of theory for the confirmation of minima. For these stable conformers, further geometry optimizations were carried out at the electron correlated MP2 level. With these optimized MP2 geometries, single-point calculations were performed at the CCSD(T)/[HW(f), 6-31+G(d)] level of theory. An extra set of f-polarization functions was added to the HW RECP (denoted as HW(f)) to increase the flexibility of the silver valence basis.5 The addition of the f-functions has been found to be important for the proper theoretical description of organometallic systems.5 However, exact calculation at the CCSD(T)/[HW(f), 6-31+G(d)] level is computationally demanding. As a result, an alternative for this calculation is employed, which involves the application of the additivity relation show below: CCSD(T)/[HW(f), 6-31 +G(d)] =
CCSD(T)/STO-3G(d) + [MP2/(HW(f), 6-31 +G(d)) MP2/STO-3G(d)]
[1]
The theoretical binding affinities (AH0) of Ag+ ion binding to ligands (L) can be defined as: AH0 = [(EAg+ + EL) - EAg+.L] + [ZPEL - ZPEAg+.L] x 0.9 [2] where EAg+, EL and EAg+.L are the electronic energies of the silver cation, the ligand and the Ag+-ligand complex, respectively, calculated at CCSD(T)/[HW(f), 6-31+G(d)] level by the additivity relation. ZPE is the zero point energies of the various species calculated at the HF/3-21G(d) level, scaled by a factor of 0.9.
Results and Discussion Figure 1 shows the different types of Ag+ binding modes of Ag(I)-substituted naphthalene complexes. For Ag(I)-alkyl substituted naphthalene complexes, only one stable cation-Ji binding mode is found. For alkoxy and halogen substituted naphthalenes, both cation-7t and non-7t binding modes are found.
rtr2.263 6-2.0°
(a)Ag+-7i Figure 1
(b)Ag + -0
(c)Ag+-Halogen
Different binding modes of Ag(I)-substituted naphthalene complexes, (a) Ag+-aromatic n binding mode of Ag(I)-naphthalene (b) Ag+-0 binding mode of Ag(I)-hydroxynaphthalene (c) Ag+-halogen binding mode of Ag(I)-fluoronaphthalene
60 Table 1
, . Substituent w
Energetics of Ag(I)-substituted naphthalene complexes (in kJmol"1) calculated at CCSD(T)/[HW(f), 6-31+G(d)] level of theory using the additivity relation Eqn [1]. Cation-7t interaction (Ag+-Jt) — — — AH 2 98
AG 2 98 C
Ag+-0/Ag+-halogen interactions AH 2 9 8
AG298
Alkyl -H
175.0
149.5
-CH3
185.3
159.8
-C2H5
189.9
164.4
-n-C3H7
193.2
167.3
-OH
176.8
150.6
141.9
114.5
-OCH3
187.2
161.0
163.6
137.3
-OC2H5
192.6
165.9
171.0
143.8
-F
160.4
135.7
100.4
78.2
-CI
162.7
137.9
-Br
162.2
137.7
151.4
124.7
Alkoxy
Halogen
142.7 -I 167.3 168.8 '"' Substituents are at C5-position of naphthalene "" Temperature correction calculated at HF/3-21G(d) level of theory lc> AG298 = AH298 - T298 AS, entropy change is calculated at the HF/3-21G(d) level of theory
143.0
Table 1 shows the affinities (enthalpies, AH29g) and free energy of binding at 298K (AG298) of Ag(I)-substituted naphthalene complexes for cation-rc and non-71 binding modes. With the exception of the Ag(I)-iodonaphthalene complex, the binding affinities of the cation-Jt binding mode are generally greater than the non-7t binding mode by about 10-30 kJ mol' 1 . This shows cation-7c interaction is indeed a relatively strong non-covalent binding force competing effectively with Ag + binding to oxygen and halogen sites. Electron-donating alkyl and alkoxy substituents could enhance the Ag + affinities of substituted naphthalenes significantly by about 20 kJ mol"1 relative to naphthalene. Conversely, electronegative halogen substituents decrease the Ag+-7t binding affinity by 8-15 kJ mol"1 so that in 5-iodo-naphthalene, Ag + binding at the non-7t iodine site becomes slightly favoured over the cation-rc binding mode. The electron-donating/withdrawing substituents affect the aromatic-rc electron density, which is related to the electrostatic quadrupole moment of the naphthalenes, leading to increasing/decreasing trend of Ag(I) affinities found in substituted naphthalenes. Figure 2(a) and Figure 2(b) show that the Ag(I) binding affinities increase with the molecular polarizability and Taft's substituent polarizability parameters, respectively. Thus, enhanced ion-induced dipole interaction is another important contributing factor accounting for the increase in Ag(I) affinity of alkyl-substituted naphthalenes, and possibly the alkoxy-substituted naphthalenes.
61 (b)
(a)
?
190-
j S \
propylnaphthalene
/ethyl-
1
& 185*
%S S .' e »
mathylnaphthalene
S
naphthalene
/
| S * J
ISO-
It
5
1 IS
175-
O.
<
"naphthalene 170Molecular Polaratability of alkylnaphthalenes
Figure 2
Plots of binding affinities (in kJmol" ) versus (a) theoretically calculated molecular polarizability of alkylnaphthalenes at MP2/3-21G(d) level of theory, and (b) Taft's alkyl-substituent polarizability parameters (c a ).
Conclusion The theoretical Ag(I) affinity due to cation-Tt interaction for naphthalene is 175 kJ mol"1. With the exception of 5-iodonaphthalene, cation-7t interaction is found to be the most stable interaction for Ag(I)-alkyl/alkoxy/halogen substituted naphthalene complexes. The Ag(I)-naphthalene affinity is increased (up to 20 kJ mol"1) by electron-donating alkyl/alkoxy substituents and decreased (up to 15 kJ mol"1) by electron-withdrawing halogen substituents. The substituent effect is attributed to enhanced or reduced electrostatic quadrupole and ion-induced dipole moment of the fused benzene system of naphthalene. References 1. J.C.Ma andD.A. Dongherty, Chem. Rev. 97, 1303 (1997). 2. P. Krogsgard-Larsen, in A Textbook of Drug Design and Development, P. KrogsgardLarsen & H. Bundgaard eds., Harwood, Chur, Switzerland, pp. 419-428, (1991). 3. H.S. Choi, S.B. Suh, S.J. Cho and K.S. Kim, Proc. Natl. Acad. Sci (USA), 95, 12094 (1998). 4. P.J. Hay and W.R. Wadt, Journal of Chem. Phys. 82, 299 (1985). 5. A.W. Ehler, M. Bohme, S. Dapprich, A. Gobbi, A. Hollwarth, V.Jonas, K.F. Kohler, R. Stegmann, A. Veldkamp and G. Frenking, Chem. Phys. Letter208, 111 (1993) Acknowledgement The award of a Hong Kong Polytechnic University graduate studentship to THML, and the funding support of the Research Grant Council of Hong Kong (Area of Excellence Project No. P-10/2001 and CERG Project No. 5190/00P) are gratefully acknowledged.
BAND-TARGET ENTROPY MINIMIZATION (BTEM) - A NOVEL APPROACH FOR PATTERN RECOGNITION IN CHEMICAL SPECTROSCOPY EFFENDI WIDJAJA AND MARC GARLAND Department of Chemical and Environmental Engineering, 4 Engineering National University of Singapore, Singapore 117576 E-mail:
[email protected]
Drive 4,
One important inverse problem in chemical spectroscopy involves the reconstruction of pure component spectra. Unfortunately, a general and robust approach has until now not been available. A novel approach namely BTEM is introduced. It is an advanced and model-free deconvolution technique based on a Shannon information entropy criterion, and it works without any aid of spectral libraries and/or a priori information. Due to its general characteristics, BTEM has been successfully applied to resolution of various two-dimensional spectroscopic data, such as FTIR, Raman, NMR, and MS.
1
Introduction
Inverse problems in science and engineering have become an increasingly important research area in this informatics era. In such problems, data is measured and collected, and meaningful information contained therein is extracted. Often, for very important inverse problems, some sort of fundamental question underlying the generic problem is answered. Examples of inverse problems which were eventually solved (after a long intense effort) and subsequently gave rise to new sub-disciplines can be found. Well- known examples are [i] x-ray diffraction data inversion and the determination of 3-dimensional chemical structures [ii] the inversion of seismic data and oil exploration and [iii] the inversion of magnetic resonance data and resulting full-human-body CAT scans. In the pharmaceutical and fine chemical context, an unsolved inverse problem can be identified in the analysis of spectroscopic measurements made during chemical syntheses. The main aim is to reveal the unique spectral pattern of each species from the mixture spectroscopic data alone (containing many new and unknown compounds). Such a method would be a new tool for system identification. In the past three decades, self-modelling curve resolution (SMCR) techniques has been developed to obtain the pure component spectra without using any libraries and/or any a priori information. In 1971, Lawton and Sylvestre [1] first introduced this new term SMCR when they resolved a two-component mixture system measured using UV/Vis spectroscopy. However, it was only applicable for a two-component system. Later, this method was extended by Ohta (1973) [2] to a three-component system using a Monte Carlo method. In the next phase, Kawata, Sasaki and coworkers (1984) [3] used these non-negativity constraints plus a minimum information entropy concept (Shannon, 1948) [4] to obtain rough but reasonably correct pure component spectral estimates. However, their investigation was limited to two-or three-component systems. Other similarly spirited methods were being developed at about the same time, as can be seen in the work of Neal (1990) [5] for resolving pure component spectra of fluorescence mixture data; and Brown and Harper (1993) [6] for resolving mass spectral data. In addition, such a non-linear constrained approach can also be seen in the spectral resolutions performed by Volkov (1995) [7]. Briefly, all these above-mentioned methods can be grouped into non-linear constrained optimization techniques.
62
63
Although many methods have been proposed and implemented, some serious problems of spectral resolution still remain unsolved/open. In particular, problems rise when the above-mentioned methods are used to recover minor components having weak signals and when components have a high degree of spectral overlap and spectral non-linearities. Therefore, a significantly new general approach to overcome these shortcomings is certainly needed especially when a very complex reaction system is investigated. In order to develop this general approach, in past few years, our research group re-examined the use of information entropy criterion for spectral reconstruction. Zeng and Garland (1998) [8] successfully revised Sasaki's model and applied fourth order spectral derivatives as part of the entropy measure to resolve a highly overlapping two-component mixture case. Later, Pan et al (2000) [9] employed piecewise-continuous variance-weighted spectral measurements coupled with entropy minimization to resolve the problem of spectral windows having significantly different variance. However, Zeng and Pan could only resolve two or three component mixture systems. In the next phase, Widjaja and Garland (2002) [10] used a combination approach of entropy minimization, simulated annealing, and spectral dissimilarity to resolve large-scale pure component spectra having a high degree of spectral overlap. Although good first estimates could be obtained, some spectral over-resolutions were clearly seen. This finding suggested that reconstruction one-spectrum-at-a-time would be necessary to overcome the above-mentioned problems. These previous studies have led to the development of the novel Band-Target Entropy Minimization (BTEM) algorithm. BTEM has been successfully applied to various simple and complex reactive mixtures measured using in-situ FTIR spectroscopy [11, 12]. However, since BTEM was developed as a general pattern-recognition tool, its applicability is wide. BTEM is not limited to only FTIR spectroscopy, but it can be used also for other chemical spectroscopic data such as Raman, NMR, and MS. Its general applicability is presented here. 2
Band-Target Entropy Minimization (BTEM)
The BTEM approach starts with the data decomposition of a set of spectroscopic mixture data using singular value decomposition. This is followed by the transformation of the basis vectors into individual pure component spectrum one at a time. The transformation is based in part on some seminal ideas borrowed from information theory and requires massive numerical computation to obtain an optimal solution. In the method, one targets a spectral feature to retain, and then combinations of the basis vectors are searched to achieve the global minimum value of an appropriate objective function. The proposed objective function is based on Shannon's information entropy criterion and various physically meaningful constraints are imposed to ensure non-negativity of the pure component spectral estimate and its corresponding concentrations. For detailed descriptions of the BTEM algorithm, readers can refer to references [11] and [12].
3
Experimental Section
The performance of the BTEM algorithm was examined using four sets of various spectroscopic data: [i] three experimental runs of semi-batch homogeneous rhodium-catalyzed alkene hydroformylation measured by in-situ FTIR spectroscopy; [ii]
64
environmental lead compound mixture data measured by FT-Raman spectroscopy; [iii] PGSE-NMR mixture spectra; and [iv] MS of three-component mixture data. The first two data sets were obtained from our own laboratory, whereas the last two data sets were obtained from internet-downloadable files, and previously were analyzed by Windig et al [13,14]. 4
Results and Discussions
FTIR spectroscopy data BTEM was applied to recover the pure component spectra of observable species present in the homogeneous catalytic hydroformylation of 3,3-dimethylbut-l-ene using Rh4(CT-CO)9(u-CO)3 as catalyst precursor and n-hexane as solvent. Three semi-batch experimental runs were performed and measured using in-situ FTIR spectroscopy. These yield 250 reaction mixture spectra. Without any sort of spectral pre-processing, these mixture spectra were subjected to singular value decomposition (SVD) and BTEM. Accordingly, all observable species were resolved, namely background moisture and C0 2 , hexane, dissolved CO in hexane, organic reactant 3,3-dimethylbut-l-ene, the organic product 4,4-dimethylpentanal, the catalyst precursor Rh4(a-CO)9(ii.-CO)3, and the observable organometallic intermediate RCORh(CO)4, Rh6(CO)i6, and the previously unknown component Rh4(a-CO)i2 (see Figure 1).
la: Major Components lb. Minor Components Figure 1. The Recovered FTIR Pure Component Spectral Estimates via BTEM. Species 1-8 are moisture, CO2, hexane, dissolved CO, 3,3-dimethylbut-l-ene, 4,4-dimethylpentanal, Rh4(o"-CO)9(|l-CO)3, RCORh(CO)4, Rh6(CO)i6, and Rh4(o-CO)i2. (Ordinate: Normalized Absorbance; Abscissa: Wavenumber)
FT-Raman spectroscopy data Eight mixtures of solids containing lead carbonate, arsenate, and oxide were made with different proportions of each compound, and later were measured using FT-Raman spectrometer. All mixture spectra were collected and consolidated into a single data matrix. Using the SVD and BTEM approach, all pure component spectra were resolved. The results are shown in Figure 2. Due to its sensitivity, BTEM was also able to recover a previously unknown and very minor compound. It was suspected that this new species is the dehydrated form of lead arsenate due to sample heating by the high power laser. The correlation coefficients between the reference and reconstructed pure component spectra for lead carbonate, arsenate, and oxide were 0.997, 0.977, and 0.999 respectively.
65
Laid Ciibonala
ISOO
3000
1500
2000
1500
2000
Figure 2. The Recovered FT-Raman Pure Component Spectra via BTEM. (Ordinate: Normalized Intensity; Abscissa: Raman Shift)
PGSE-NMR spectroscopy data This data was a mixture of 0.1% w/w TX-100 (a non-ionic surfactant) in water and 5% w/w gelatine in water. In this experiment 20 mixture spectra were measured in the range of-0.58 to 8.1 ppm using PGSE-NMR spectroscopy. Previous analysis was performed using DECRA approach (Windig and Antalek, 1997) [13]. Reasonable pure component spectra were recovered in spite of highly overlapping spectral features between TX-100 and gelatine. In the current study, the applicability of the BTEM approach to resolve NMR data was tested. Accordingly, the consolidated data matrix was subjected to SVD and BTEM, and the pure component spectra of TX-100 and gelatine were reconstructed as shown in Figure 3. The correlation coefficients between the reference and the estimated pure spectra for TX-100 and gelatine are 0.994 and 0.973 respectively. These values can be compared to the DECRA results (both gave same values) which are 0.995 and 0.930 respectively.
Figure 3. The Recovered PGSE-NMR Pure Component Spectra via BTEM. (Ordinate: Normalized Intensity; Abscissa: ppm)
MS spectroscopy data Time resolved mass spectral data of a three-component mixture previously was analyzed by Windig et al using SIMPLISMA approach. The data consists of three photographic color-coupling compounds, dissolved in methanol. More details of the experimental set up can be found in reference [14]. Again, the applicability of BTEM to resolve pure component spectra was tested for MS data. Accordingly, the mixture spectra data matrix was decomposed using SVD and later was subjected to BTEM. All three pure component spectra were resolved, and are shown in Figure 4. The correlation coefficients between the reference and the estimates for compounds A, B and C are 0.988, 0.974, and 0.992 respectively.
66
JXA •0.11
li I. . 1
. i.. L.
. ( . —J-¥
1,1.1 n . , J l l • .1 -
,
,
.
.
•,
i
> '
Figure 4. The Recovered Pure Component Spectra via BTEM. (Ordinate: Normalized Intensity; Abscissa: M/e)
5
Conclusion
In this paper, BTEM as a general spectral reconstruction algorithm is presented. Four various spectroscopy data obtained from four different chemical spectroscopies, namely FTIR, FT-Raman, NMR, and MS were analyzed. It was seen that the pure component spectra for all observable components were well reconstructed. References 1. Lawton W. H. and Sylvestre E. A., Interactive self-modeling mixture analysis, Technometrics 13 (1971) pp. 617-633. 2. Ohta N., Estimating absorption bands of component dyes by means of principal component analysis, Anal. Chem. 45 (1973) pp. 553-557. 3. Sasaki K., Kawata S., and Minami S., Estimation of component spectral curves from unkown mixture spectra, Appl. Optics. 23 (1984) pp. 1955-1959. 4. Shannon C.E., A mathematical theory of communication, Bell System Tech. J. 3 (1948) pp. 379-423. 5. Neal S.L., Davidson E.R., and Warner, I.M., Resolution of severely overlapped spectra from matrix-formatted spectral data using constrained nonlinear optimization, Anal.Chem. 62 (1990) pp. 658-664. 6. Brown S.D. and Harper A.M., Multivariate analysis of time-resolved pyrolysis mass spectral data, Computer-Enhanced Analytical Spectroscopy, Vol. 4 (1993) Ed. By Wilkins, C.L. pp. 135-163. New York: Plenum Press. 7. Volkov V.V., Separation of additive mixture spectra by a self-modeling method, Appl. Spectrosc. 50 (1996) pp. 320-326. 8. Zeng Y. and Garland M., An improved algorithm for estimating pure component spectra in exploratory chemometric studies based on entropy minimization, Anal. Chim. Acta. 359 (1998) pp. 303-310. 9. Pan Y., Susithra L. and Garland M., Pure component reconstructions using entropy minimizations and variance-weighted piecewise-continuous spectral regions. Application to the unstable experimental system Co-2(CO)(8)/Co-4(CO)(12), J. Chemometr. 14 (2000) pp. 63-77. 10. Widjaja E. and Garland M., Pure component spectral reconstruction from mixture data using SVD, global entropy minimization, and simulated annealing. Numerical investigations of admissible objective functions using a synthetic 7-species data set, J. Comput. Chem. 23 (2002) pp. 911-919. 11. Widjaja E., Li C.Z., and Garland M., Semi-batch homogeneous catalytic in-situ spectroscopic data. FTIR spectral reconstructions using Band-Target Entropy Minimisation (BTEM) without spectral preconditioning. Organometallics. 21 (2002) pp. 1991-1997. 12. Chew W., Widjaja E. and Garland M., Band-target entropy minimization (BTEM): An advanced method for recovering unknown pure component spectra, application to the FTIR spectra of unstable organometallic mixtures, Organometallics 21 (2002) pp. 1982-1990. 13. Windig W. and Antalek B., Direct exponential curve resolution algorithm (DECRA): a novel application of the generalized rank annihilation method for a single spectral mixture data set with exponentially decaying contribution profiles. Chemom. Intell. Lab. Syst. 37 (1997) pp. 241 -254. 14. Phalp J.M., Payne A.W., and Windig W., The resolution of mixtures using data from automated probe mass spectrometry, Anal. Chim. Acta. 318 (1995) pp. 43-53.
DEVELOPMENT OF A WEB-BASED STATISTICAL PROCESS CONTROL ANALYSIS AND REPORTING SYSTEM FOR TABLET PROCESSING PLANTS T.T. LEE Y.L. LI AND P. WU Institute of High Performance Computing, 1 Science Park Road #01-01 The Capricorn, Singapore Science Park II Singapore 117528 M. K. CHIN T. LIM AND L. K. SEE Sumitomo Bakelite Singapore Pte Ltd, 1 Senoko South Road Singapore
758069
This paper presents a method and system for automating the process of generating statistical summaries, products distribution and statistical process control charts for tablet process plants. We integrate the capabilities of commercial real-time statistical process control software, Microsoft® SQL Server database, TomCat Servlet Container, HTML, JavaServer Pages™, JavaBeans™ and JDBC™ technologies. The system allows for not only real-time SPC analysis and reporting of daily production lots but also monthly SPC analysis and reporting and operator entry of essential lot data into a centralised database through a user-friendly web-based graphical users interface (GUI).
1
Introduction
Statistical Process Control (SPC) composes a set of statistical tools for monitoring of production process and making timely modifications to process variables in order to improve and/or maintain quality and increase productivity. A real-time SPC system typically allows for both automated and non-automated data collection, real-time plotting of industry-standard SPC charts and computation of critical statistical parameters for process monitoring, triggering control actions, storage of data into database server(s) as well as conducting statistical analyses and generate SPC reports [1]. Such system also allows for remote real-time monitoring of functionally and geographically distributed plants and supporting facilities via networks. While SPC tools such as control charts are mature technology, the implementation technologies are still advancing due to the rapid development in computers and computing technology [2]. This paper presents development of a Java-enabled web-based automated SPC analysis and reporting system for tablet manufacturing in the specialty chemicals industry. The system provides easy-to-use graphical users interface (GUI). Users enter essential production lots and tablet standard numbers (TSN) through the GUI, connect to a centralised database server, retrieve and process raw data to generate SPC reports for analysis. 2
Manufacturing process overview and SPC system requirement
Epoxy moulding compounds for encapsulation (EME) is one of the main products in the specialty chemicals industry. The manufacturing process involves a series of unit operations: (i) mixing and kneading of raw materials; (ii) cooling and pulverising of EME products in powder form and (iii) postmixing and pelletising to produce the EME products in their final form i.e. tablets. Tablet sizes vary according to TSN, which contains such information as customer, grade, lot number, tablet weight and tablet height. It is imperative that the manufactured EME tablet products are within customer's
67
68 specifications. One way to monitor product quality specifications is via the web-based SPC analysis and reporting system which encompasses three distinct subsystems namely: pelletising lot SPC analysis and reporting subsystem, pelletising monthly SPC analysis and reporting subsystem and end lot data input. The pelletising lot SPC analysis and reporting subsystem contains amongst other: information on customer, tablet specifications, raw data of EME tablet weight and height, and vital statistics such as mean, standard deviation (SD), process capability indices (Cp and CpK) and X-bar and S charts. For a given production lot, the daily pelletising SPC report should also show control limits (CL), upper control limits (UCL) and lower control limits (LCL) and indicate number of out of specification (OOS) tablets and a listing of all out of control (OOC) tablet products. The pelletising monthly SPC analysis and reporting subsystem contains such information as: quantity of irregular products, final yield of each production lot and vital statistics such as mean, SD, Cp, CpK, OOS and OOC of the final product specifications for a given month. It is necessary for operator to insert lot data into the relational database after each lot has been completed. These data serves to identify the machine and operator where data is acquired and for computation of statistics required in the pelletising lot and monthly SPC reports. This motivates the development of the end lot data input subsystem. 3
System architecture and functions
The system consists of a centralised, Microsoft® SQL [3] database server, a web server and client workstations as in Fig. 1. This system was integrated to the EME tablet realtime database created using WinSPC® [4], which is hosted in a dedicated database server and interfaced to plant data acquisition servers and devices [1]. The system includes three tiers of client tier, the middle tier (the web server) and the end tier (the database server). We employed Tomcat [5] for the web server. The clients send requests via web browsers and the requests are sent to the SPC web server for processing. While the requests are processed, the web server retrieves data from the database server and processes the retrieved data using the logic programmed in the JavaServer Pages™ (JSP™) and JavaBeans™ [6]. After SPC data processing is completed, the web server generates the required SPC report and sends it to the client's browser in HyperText Markup language (HTML) format. The system has the capabilities to automatically compute the EME tablet statistical parameters such as USL (upper specification limit), LSL (lower specification limit), CL, UCL, LCL, SD, Cp/CpK, OOC, mean, max and min values of queried variables. The EME tablet real-time database comprises of some 100 relational tables. In this work, only the relevant tables for the reporting system are identified. The tables containing such information as TSN, usernames and end lot inputs are also created as part of the system development. 4
Demonstration examples
Fig. 2 is the main login interface of the reporting system for the EME tablet plant. There are three possible login options representing the three subsystems. To access the pelletising lot SPC analysis and reporting subsystem, operator presses the toolbar "Pelletising Lot SPC Report" for login. Because of security issues, users need provided their assigned UserName' and 'PassWord' for login. It is shown in Fig. 3. This subsystem
69
Hfttt
A AAA * +
*
SPf Vfrtt.
Figure 1. The system architecture
1M
F ' i l« SPC Reporting System
E I C ' i JI S3C ^e il i j s
P>
e^* _i*-™** J
I li>l!Il 2
MLIIII I I I [
iw **^** ^™ j
I mure J ( i l I mi SR Kjp.ui
»-*«, - ,> i j a * - * i ( »— J » » « .**• *#-•( w*M8tjs*ww»e**j»
1
,s
. 1
.•B
Figure 4 Demonstration example of lot SPC reporting system
i
i: 1
I
if,
jf
.1
70
also asks for 'LOT No' and 'Tablet STD No' for querying and computing the lot SPC report. After a successful login, raw data retrieving and processing, a lot report is generated. As shown in Fig. 4, the report gave the pelletising machine number, the EME tablet products specifications, operators' identification, customer's name and EME tablet weight and height specifications in terms of USL, LSL, UCL, CL and LCL. The bulk of statistical summary is given in the next row under subtitle 'LOT SUMMARY'. Query results shown in Fig. 4 (top left) indicated that minimum values of the EME tablet weight and height are near to zero and there are presence of OOS points in the collected raw data (i.e. 42 for weight and 47 for height from over 2000 data points). The precise OOS points in the raw data are explicitly identified in the result by an asterisk (see Fig. 4, top right). Inspection the histograms in Fig. 4 (bottom left) showed that although they appears to be normally distributed, all of the OOS data are near to zero implying that the EME tablet real-time SPC database contains 'unreasonable' weight and height data. These unreasonable OOS data contributed to the falsely calculated process capability indices (CP and CpK) of less than 1 or process not capable. This result also suggests that the autochecker equipment at pelletising machine number Tmtws09, which automatically collects weight and height raw data have some operational problem requiring maintenance. Alternatively, the SPC administrator could apply a standard control test in the WinSPC package to reject unreasonable data from entering the EME tablet real-time SPC database and to generate correct statistics. 5
Conclusions
Using the pelletising lot SPC analysis and reporting subsystem, plant operators working at independently-operated pelletising machines are able to capture summary statistics required for analysing EME tablet produced for each production lot at their respective SPC workstation. Other manufacturing personnel such as QA people and senior management can also access the system through their own workstation via network. Plant operator could also enter information necessary for monthly SPC analysis and reporting after end of data collection for each production lot. Plant engineers are able to quickly capture summary statistics for each production lots produced at a given pelletising machine for a given month. In view of the modularised development, the system is easily scaleable to include other functionality. 6
References 1. T.T. Lee, 2002, Development of a plant-wide real-time SPC system for the specialty chemicals industry, HPC symposium 2002, Singapore. 2. S. Dogdu and D.L Santos, 1998, The paradigm shift in statistical process control due to the latest developments in computer technology, Computers & Industrial Engineering, 35(1-2), 177-180. 3. Microsoft is a registered trademark of Microsoft Corporation, http://www.microsoft.com 4. WinSPC is a registered trademark of DataNet Quality Systems, http://www.winspc.com 5. Tomcat servlet container is managed by the Apache Jakarta Project, http://iakarta.apache.org/tomcat/tomcat-3.2-doc/index.html 6. Java, JavaServer Pages and JavaBeans are registered trademark of Sun Microsystems, http://iava.sun.eom/i2se/l.3/index.html
MONTE CARLO SIMULATION OF SURFACE SEGREGATION IN Ni-Co NANOPARTICLES R. JAYAGANTHAN* and G. M. CHOW Department of Materials Science National University of Singapore Kent Ridge, Singapore 119260, Republic of Singapore E-mail:
[email protected]« Abstract An analysis of surface segregation of Ni-Co alloy nanoparticle (atomic ratio 1:1) is carried out using Monte Carlo simulation with the energetics of alloy nanoparticles described by Bozzolo-Ferrante-Smith (BFS) method. The surface compositions of Ni-Co nanoparticles are calculated based on the simulation that takes into account of the size effect. The segregated surface compositions in the Ni-Co binary alloy single-crystal nanoparticles (with particle diameter of 10-100 nm) are observed to be larger than that of the corresponding bulk single crystal (with the particle diameter > 100 nm). The details of Monte Carlo simulation and the calculated surface compositions due to segregation are discussed. 1.0 Introduction Nanostructured particles and films (with particle diameter < lOOnm) have received great attention due to often-improved properties that arise from the size effects and surface/interface effects. The composition, structure, and properties of the nanoparticles and nanostructured thin films are affected by compositional surface segregation. The surface composition of nanoparticles is generally different from the average or bulk composition; this phenomenon is commonly referred to as surface segregation or surface enrichment. The driving force for the surface segregations are i) reductions in surface free energy, ii) bulk elastic strain energy and iii) size effects. The surface segregation in bulk materials has been reasonably well understood in the earlier thermodynamics work by Gibbs [1], however, surface segregation in nanoparticles and the nanostructured thin films (polycrystalline or single crystalline) is expected to differ from the bulk due to the contribution of the significant amount of surface atoms in nanostructures. It is therefore essential to analyze the thermodynamics of surface segregation in nanoparticles as they significantly influence the properties of the materials. In this paper, we present our Monte Carlo Simulation of surface segregation in Ni-Co nanoparticles with the energetics of nanoparticles, described by Bozzolo-Ferrante-Smith (BFS) method [2]. 2.0 Outline of the Modeling and Simulation Approach The Bozzolo-Ferrante-Smith (BFS) method [2, 3] is used to calculate the strain energy and chemical energy of nanoparticles and evaluate the surface segregation profile simulated by Metropolis Monte Carlo Algorithm [4, 5]. The BFS method [2, 3] is based on the idea that the energy of formation AH of an arbitrary alloy structure is the superposition of individual contributions of all the atoms in the alloy. AH = l e , = S(e,'-e,), (1) where s, is the energy of atom i in the alloy and ei is the energy of this atom in its equilibrium single crystal. Each individual contribution E; can be interpreted as the superposition of two distinct processes, strain energy and a chemical energy, that are properly coupled in an attempt to simulate the alloy formation in Ni-Co nanoparticles. A strain energy, e;S, and chemical energy eiC is linked by a coupling factor, &, E,=
e, s
+ gi(e1c-e,c°)
(2)
where ejCo is the reference chemical energy.
71
72 2.1 Monte Carlo Simulation Technique It is a stochastic technique employed for computing averages over a statistical ensemble. The Monte Carlo simulation does not require the physical dynamics of the system to be followed. In analyzing segregation profile, this is essential in computing the thermodynamics at finite temperature. For the case of alloys, it is possible to change the compositional arrangements of atoms without worrying about kinetics of the system. This is valid for the computation of thermodynamic equilibrium. In the Monte Carlo simulation, a series of atomic configurations is produced such that the probability of a configuration being generated is proportional to the probability of the configuration occurring in the statistical ensemble. This can be achieved using following Metropolis algorithm [4, 5]. The surface of nanoparticles was modeled using Monte Carlo method by first initializing the atoms in a fee lattice and then the following algorithm was implemented. 1. An atom is selected and allowed to interchange positions in the lattice with another atom. 2. The configuration energy change, AE, is due to the switch described in step 1 is calculated. 3. If AE is negative, the new configuration is accepted. If AE is positive, a random number between zero and one is selected from a uniform distribution. If the quantity exp (AE/kT) is greater than this random number, the new configuration is accepted; otherwise the old configuration is retained. 4. Steps 1 to 3 are repeated until "equilibrium" (no significant changes in total configurational energy occur with time) is reached. 3.0 Surface segregation of Ni-Co nanoparticles. In the present work, the Monte-Carlo simulation has been used for analyzing the surface segregation in Ni-Co nanoparticles (1:1). Co and Ni have very close bulk binding energies (4.446 and 4.435 eV, respectively) and nearest neighbor distances (2.506 A0 and 2.489 A0 respectively). Co is typically hep but for fee Ni-Co alloys, one can treat Co as fee. The first two coordination shells (nearest neighbors) of hep Co can also be approximated as the first coordination shell of fee Co, thus allowing us to treat the above argument without any problem. The theories based on the broken bond models and strain theory indicated a small surface segregation of 56 atomic percent for Ni-Co bulk alloys [6]. E.E.Hajcsar et. al. [7] has predicted Ni segregation at the surface across the composition range of Ni-Co. In this paper, the calculated surface compositions of Ni-Co nanoparticles (1:1) was based on Metropolis Monte Carlo Algorithm and are compared with the experimental results [7]. E.E.Hajcsar et. al. [7] used the Auger electron spectroscopy to determine the temperature dependence of surface segregation in Ni-Co bulk alloy single crystal on (111) faces. In our earlier work [8], the surface compositions of Ni in Ni-Co nanoparticles were calculated based on the thermodynamic model which takes into account of size effect. The experimental and theoretical results on surface compositions are plotted in order to compare with our calculations that took into consideration of the size effect on the surface segregations. The parameters used for calculating the strain energy and chemical energy ofNi-Co nanoparticles using eq. (1) are given in Table. 1. Table 1 Parameters of Ni and Co [3]
Parameter
Ni
Cohesive Energy
5.6724
Melting Temperature(K)
1726.1SK
Lattice Parameter
3.5173 (A0)
Co 5. 5637 1768.15K 3.4569 (A0)
73
0.66
O A
0.64
O 0.62 —
A O
A
0.60
:
a
O
0.58 -
•
A 0.56 -
•
i
0.54
•
O
A 0.52
O D
•
A
0.50 A
O
O
•
•
0.48 0.46
D O A
—
n id
1.02
•
i
1.04
i
1.06
1 1.08
i
Expt,Bulk [7] Size effect [8] Size effect [present work]
I
.
1.10 3
(1/TX10" )K"' Fig. 1 Plot of In C versus 1/T for (111) face of Ni-Co Nanoparticles
I
.
1.12
.14
74
•
• O
) ]
O -
•
Size effect [8] Size effect [present work]
O
•
-
o
-
•
o •
-
-
O
•
-
o •
o •
-
20
1
i
40
60
.
i
o • .
o
D
i
80
Particle Size, R (nm) Fig. 2 Plot of Surface Composition of Ni versus particle size of Ni-Co Nanoparticles
• •
100
120
75 4.0 Results and Discussion The Monte Carlo Simulation has been used to study the influence of size effect on the surface segregation of Ni-Co nanoparticles. The surface compositions of the Ni-Co nanoparticles, influenced by particle size, have been calculated using Metropolis Monte Carlo algorithm. The ratio of the nickel surface composition ( x , ' ) to the nickel bulk (Xh' ) compositions (In C) versus temperature for the (111) face of Ni-Co nanoparticles are plotted in Fig.l. The calculated surface compositions of Ni, in this present work, are compared with that of the Ni-Co alloy surfaces with the large particles size as well as with theoretically calculated surface compositions. It is observed, from Fig. 1 that the segregated Ni surface compositions in the Ni-Co binary alloy nanoparticles (with particle diameter of 10-100 nm) are larger than the bulk alloy surfaces (with the particle diameter > 100 nm). It is evident that Ni segregates to the surface in preference to Co in the Ni-Co nanoparticles and the segregation is larger when compared to that of the bulk Ni-Co alloy single crystal surface due the size effect. The calculated surface compositions in the present work are in tandem with the theoretically predicted compositions. The segregated surface compositions, Xs (Ni), of Ni-Co single crystalline nanoparticles as a function of particle size for (111) faces are plotted in Fig. 2 and compared with that of theoretically predicted surface compositions. It is observed that the surface composition of Ni increases when the particle size decreases, due to the size effect manifested in Ni-Co nanoparticles. For a particle diameter of 10 nm, the surface occupies 25 percent of the total number of atoms and influences the physical and chemical properties of the particle. For a particle diameter of 100 nm and 1000 nm, the surface atoms are only 2.5 percent and 2.5 percent of the total number of atoms in the particle, respectively. Therefore when the particle diameter increases to 100 nm or above, the surface effect becomes less pronounced to affect the surface segregation in Ni-Co bulk alloy single crystal surface. It is evident that the surface composition tends to approach that of the composition of the bulk alloy surface when the particle diameter approaches 100 nm and above. When the particle size is very small, the surface area increases and the maximum number of atoms, of the particle, with the lower surface tension value occupy the surface. 5.0 Summary An attempt has been made to analyze the particle size effects on the surface segregation in the Ni-Co nanoparticles using Monte Carlo Simulation with the energetics described by BFS method [2]. The analysis of surface segregation in Ni-Co nanoparticles was based on the MC algorithm in the present investigation. The surface compositions of the Ni in Ni-Co nanoparticles for (111) faces are observed to be higher than that of the bulk alloy single crystal surfaces with larger particles size. Acknowledgement: G. M. Chow would like to thank the support of this work by the DSO National Laboratories, Republic of Singapore. R. Jayaganthan was supported by NUS research fellowship. References 1. 2. 3. 4. 5. 6. 7. 8.
J. W. Gibbs reprinted in: J. W. Gibbs, The scientific papers, Dover, New York, 1961. G. Bozzolo, J. Ferrante, R. D. Noebe, B. Good, Frank S. Honecy, Phillip Abel, Computational Materials Science 15 (1999) pp. 169-195. G. Bozzolo, J. Ferrante, NASA Technical Memorandum 106675, July 1994. N. Metropolis, A. W. Rosenbluth, M. N. Rosenbluth, A. N. Teller, and E. Teller, J. Chem. Phys., 21 (1953) pp. 1087-1092. N. Metropolis. The beginning of the Monte Carlo Method. Los Alamos Science 12 (1987) pp. 125-130. P. R.Underhill, Surf. Sci. 195 (1988) pp. 557-565. E. E. Hajcsar, P. Underhill, W. Smeltzer, P. Dawson, Surf. Sci. 191 (1987) pp. 249-258. R. Jayaganthan, G. M. Chow, Materials Science and Engineering-B 95 (2002) pp. 116.
FIRST PRINCIPLES STUDIES OF THE DISSOCIATION OF PROTONATED ALANINE (H+-ALA) COMPLEX SEDURAMAN ABIRAMI,ab CATHERINE WONG,c N. L. MAa*+, C. W. TSANGd*n, N. K. GOHb "Institute of High Performance Computing, 1 Science Park Road, #01-01 The Capricon, Singapore Science Park' • , Singapore 117528, Singapore National Institute of Education, Science and Technology Education, 1 Nanyang Walk, Singapore 637616, Singapore cDepartment of Chemistry, The University of Hong Kong, Pokfulam Road, Hong Kong. Department of Applied Biology and Chemical Technology, The Hong Kong Polytechnic University, Hung Horn, Hong Kong 1E-mail:
[email protected] E-mail:
[email protected]
The fragmentation pathway of protonated alanine (H+-Ala) in the gas phase has been investigated using hybrid density functional theories (DFT). Four fragmentation pathways are considered: loss of H 2 0; CO; CO+H 2 0 and NH3 from H+-Ala. Our result suggested that the formation of CO is the thermodynamically most favourable process, which is in exact agreement with electrospray mass spectrometry experiment. The Car-Parinello molecular dynamic (CPMD) simulation on H+-Ala gave new insight on the dynamical aspect of the fragmentation.
Introduction Proteins are made up of amino acids. At each position in the chain, only one of twenty amino acids may be present. In biological (aqueous) systems, the functions of enzymes are often dependent on their peptide or proteins structures in the dipolar (zwitterionic) state, which in turn are determined by the sequence (position) of constituent amino acids in the peptide or protein chain [1]. The first step in studying the biological function of a protein or peptide is to determine its amino acid sequence. Mass spectrometric analysis of peptides and proteins is fast and extremely sensitive (down to pico- to femtomole levels). This is mainly based on the fragmentation of protonated and alkali metal cationized peptides [2,3]. Unfortunately, the fragmentation chemistry of peptides is rich and complicated, comprehensible only to the highly experienced. Part of the reason is that the fragmentation mechanism and pathways of protonated cationized peptides, which are related to their structures and sequences in the gas phase (the conditions under which mass spectrometers operate), are not fully understood. In this work, we used state-of-the art quantum chemical calculations to study the fragmentation mechanism of protonated alanine (H+-Ala). In order to gain insight on the dynamical aspect of this system, Car-Parrinello ab initio molecular dynamics has also been carried out. Finally we compared our simulation results with mass spectrometry experiments. Computational details Ab initio molecular orbital calculations were carried out using GAUSSIAN98 package of programs [4]. All the species involved in the fragmentation were optimized at the B3LYP/6-31G(d) level and single point calculations were carried out at the B3LYP/6311+G(3df,2p) level. All stationary points were verified at the B3LYP/6-31G(d) level to be minima or transition states by frequency calculation. First principles molecular
76
77
dynamics calculations have been performed with the Vienna Ab-initio Simulation Package (VASP) [5-9]. The FT^-Ala was placed in a cubic box with edge length of 12 A to imitate gas phase condition. A planewave basis set was used for the electron wavefunction, which was solved at each MD step by conjugate gradient minimization of the total electronic energy within the framework of closed-shell LDA [10] with the Perdew-Wang gradient correction to the exchange-correlation functional [11]. For the core region, the optimized ultrasoft pseudopotentials supplied with VASP were directly used for all atoms, with a cutoff energy 270 eV. A preliminary equilibrating simulation was performed at 1500 K, starting with the ground state equilibrium H+-Ala geometry obtained from the ab initio calculations. The time step used was 0.5 fs, and the length of the simulation was 3 ps (6000 steps). Thirty five random configurations were selected from this simulation as the starting structures for further trajectory studies at 2700K, in order to raise the probability of observing the thermal dissociation reaction. For these trajectories, the time-step was again 0.5 fs and the duration of simulation was 1.0 ps (2000 steps). Mass Spectrometry All mass spectrometric experiments were performed on a quadruple ion-trap mass spectrometer (LCQ, Finnigan, San Jose, CA) equipped with an electrospray ionization (ESI) source. The CID (collision-induced dissociation) MS experiments were performed by mass selecting target ions using standard isolation (isolation width 1-3 m/z) and excitation (activation Q 0.25 and activation time 3-5 ms) techniques. All data collected were an average of 50 scans. Results and Discussion 1.1 Fragmentation pathways for the protonated Alanine (ff^-Ala)
Figure 1. The energy profile for the dissociation of H+-Alanine
78
The potential energy profile of the H+-Ala dissociation is shown in Fig. 1. Starting from structure 1A, a few pathways have been explored and only the most lowest energy pathway is reported below. Four processes are considered: 1. Loss of CO (8A +CO) 2. LossofH 2 0(9A + H 2 0) 3. LossofH 2 O + CO(10A + H2O + CO) 4. LossofNH 3 (llA + NH3) The loss of CO proceeds through the following path: 1A« 2A« 3A« 4A« 5A • 6A • 7A • 8A + CO One of the ammonium protons in 1A was transferred from the nitrogen to the carbonyl oxygen, yielding isomer 3A. The isomer 3A, via the transition structure 4A, results in the immediate loss of water to form 5A, which is a weak ion-molecule complex between CH3CH=NH2+, H 2 0 and CO. Further loss of CO from 5A take place via the transition structure 6A, to form the complex 7A. From the complex 7A either loss of CO or H 2 0 can take place in a stepwise manner. However, the loss of CO from 7A is found to be more favourable, yielding a stable complex 8A of the formula CH3CH=NH2+.. .H 2 0. The stability of this complex 8A arises from the very strong hydrogen bond present in which the amino hydrogen acts as the hydrogen bond donor, with a hydrogen bonding distance of 1.70 A. The next most likely fragment formed, based on energetics consideration, is 9A + H 2 0, which is 39 kJ mol"1 above 8A + CO. The iminium ion (10A + H 2 0 + CO) could be derived from the 8A + CO or 9A + H 2 0 in a stepwise fashion, which in turn depends on how the energy is partitioned between the fragments. An alternative pathway for the loss of H 2 0 + CO is the direct loss of both the neutral fragments from the species 5A. The loss of ammonia takes place by simple C-N bond breaking from 1A, producing the product 11A and NH3. The corresponding product is very unstable at 260 kJ mol"1 above 1A. From the above PES study, it is very clear that the loss of CO is thermodynamically more favourable compared to the other pathways. This is in consistent with the experiment in which lose of CO is exclusively observed under ESI low energy CID ion trap conditions. Car-Parrinello Molecular Dynamic (CPMD) Study The summary of the 35 CPMD trajectories is shown in the Table 1. Table 1. Summary of the reactions observed in the 35 trajectories Reaction observed 1A« NH3 + CH3CHCOOH+ 1A« NH3 + CH2CHC(OH)2+ 1A« CH3CHNH2++ C(OH)2 1A« NHt++ CH2CHCOOH No reaction
Frequency 8 (23%) 1 (3%) 1 (3%) 2 (6%) 23 (65%)
79
No reaction was observed in 23 out of 35 trajectory. From the CPMD simulation at elevated temperature, loss of NH3 is the most favored process from 1A through the direct fission of the C-N bond. The product ammonia is observed in 9 trajectories (i.e. 26%) along with CH3CHCOOH+ and CH2CHC(OH)2+. The loss of NH4+ ion is observed in two trajectories (i.e. 6%) and loss of dihroxycarbene is observed in only one trajectory. Comparison between CPMD results with PES study At elevated temperature, the CPMD results show that the loss of CO does not follow the lowest energy pathway as suggested by the ab intio and ESI-MS experimental results. The loss of NH3 pathway was more preferred over the other pathways. This suggested that using 'harder or more energetic' ionization methods (e.g. electron impact), the major fragment in the mass spectrometer derived from H+-Ala is likely to be NH3. Conclusions 1. The ab initio PES results suggest that the formation of CO fragment is preferred over the other fragments. Our simulation results are in exact agreement with the experiment in which loss of CO is exclusively observed under ESI low energy CID ion trap conditions. 2. The ab initio results shows that the loss of NH3 from H+-Ala is thermodynamically unfavourable compared to the other pathways. 3. The CPMD simulation at elevated temperature shows that the formation of NH3 is preferred over the other pathways. New fragments and reaction pathways are observed when the temperature is raised. References 1. Lippard, S. J.; Berg, J. M. Principles of Bioinorganic Chemistry, 1994, University Science Books, Mill Valley, California. 2. Jonsson, A.P., Mass Spectrometry for protein and peptide characterization, CMLS, 2001, Cell. Mol. Life. Sci., 58. 3. Kinter, M., Sherman, N.E., Protein Sequencing and Identification Using Tandem Mass Spectrometry, 2000, Wiley. 4. Frisch, M. J. et.al. Gaussian 98 Revision A.7 Gaussian, Inc.: Pittsburgh, PA, 1998. 5. Kresse, G.; Hafner, J. Phys. Rev. B. 1993, 47, 558. 6. Kresse, G.; Hafner, J. Phys. Rev. B. 1991, 49, 14251. 7. Kresse, G.; Furthmuller, J. Comput. Mat. Sci. 1996, 6, 15. 8. Kresse, G.; Furthmuller, Phys. Rev. B. 1996,54,11169. 9. Kresse, G.; Hafner, J. Phys. Condens. Mat. 1994, 6, 8245. 10. Payne, M. C ; Teter, M. P; Allan, D. C ; Aria, T. A; Joannopoulos, J. D. Rev. Mod. Phys. 1992, 64, 1045. 11. Perdew, J. P.; Ziesche, P.; Eschrig, H. Electronic Structures of Solids 91, Adademie, Berlin, 1991, p. 11.
MOLECULES AND STRUCTURES FOR MOLECULAR ELECTRONIC NANODEVICES PING BAI, SHUO-WANG YANG, PING WU, ER-PING LI Institute of High Performance Computing I Science Park Road, #01-01,The Capricorn Science Park II, Singapore 117528 Email:
[email protected],
[email protected], wuping®ihpc.a-star.edu.sg,
[email protected] A review of molecular electronic structures and molecules for electronics is given. Molecular wire, molecular devices and their incorporation into electronic system have been addressed. The conductance through molecules particularly nanotubes is analyzed. To explore new molecules/nanotubes applied in electronic device, several borne, carbon and nitrogen mixed cyclancenes, (BCN)„, are investigated by using ab intio methods Hartree-Fock and unrestricted density functional theory to exam their energy gaps change along with molecular components, symmetry and size. The results show that thionations do not affect energy gaps much and (BCN)„ could be potential molecular structure for the molecular electronic devices through thiolated bonds.
1
Introduction
The microelectronics industry is presently close to the limit of minimisation trend dictated by both laws of physics and the cost of production. Molecular electronics offers a completely different approach to the problem [2]. Molecular construction is a bottom-up technology that uses atoms to build nanometer-sized molecules that could further selfassemble into a desired computational circuitry. This bottom-up approach gives rise to the prospect of manufacturing electronic circuits in rapid, cost-efficient, flow-through processes. It in principle allows a very precise positioning of collections of atoms or molecules with specific functionalities. Molecular electronics has received great attention because of the ultimate size limit of functional devices. Some studying on the molecular electronics have been carried out in number of research institutions [2-7]. However, it is very young. The development of molecule-sized components is still very much at the research stage. Although the advances were encouraging, the challenges remaining are enormous. In this brief, the basic molecular electronic structure is introduced first. Then molecules are analysed from electronic application point of view. Finally, we propose several thiolated borazine cyclancenes as novel potential molecules for molecular electronic devices. 2
Molecular electronic structures
Molecular electronics involves the replacement of a wire, transistor, or other basic solidstate electronic element with one or a few molecules. To construct a wire, an elongated molecule is needed to allow electrons to flow easily from one end to the other. Electrons in any quantized structure such as a molecule tend to move from higher to lower energy levels. To channel electrons, a molecule should have an empty, low-energy orbital that is dispersed throughout the molecule from one end to the other. A pi orbital is a typical empty, low-energy electron orbital. A pi-conjugated molecular wire could be constructed
80
81 by configuring the electron orbitals in which electron clouds overlap from one molecular component to the next. An active device such as a transistor has to do more than merely allow electrons to flow. It has to somehow control that flow. For instance, the design of a molecular transistor is generally based on the control from one electrode (the source) to the other (the drain) of the electron transfer rate through the molecule itself by a control electrode (the gate). The rate can be modified by the shift in energy of a given molecular level of the molecule relative to the Fermi level of the electrodes, by changing gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the molecule or the molecule-source and/or molecule-drain electrode electronic coupling. Electromechanical control [4] and field effect control [6] could be employed. Making a conjugated molecule is one thing; incorporating it into a circuit and measuring its ability to transport electrons are different problems. To incorporate molecules into nanoscopic circuits, either end of the molecule need to be linked to separate metallic electrodes via the strong thiol-metal atom interaction. This affords a metal-molecule-metal circuit capable of the transport of electrons from one electrode to the other through the molecules, in an interesting fusion of molecular and conventional electronics. The way in which the molecule is linked to electrodes is therefore as impotent as the molecule itself. Attachment of molecular alligator clips to one or both sides of related molecules has been demonstrated to improve the quality of the contacts with the molecule. Several types of molecular alligator have been studied both experimentally and theoretically. These include sulfur, selenium, tellurium, and isonitrile end groups [7]. There remains a need to develop molecular alligator clips that minimise the impedance mismatches between molecular structures and metal surfaces. 3
Molecules for electronics
Molecules studied as wires or devices cover a very wide variety of types, including conjugated hydrocarbons, nucleic acid strands, carbon nanotubes, and porphyrin oligomers. One feature they gave in common is the highly conjugated and delocalised structure [8]. Single-welled carbon nanotubes (SWCNTs) show unique electronic as well as mechanical properties and offer tremendous opportunities for the development of fundamentally new systems [9]. SWCNT can be visualised as a sheet of graphene that has been rolled into a tube. Transport of electrons within the plane of a graphene sheet can occur over long distances as it in a conjugated molecule. However, a graphene sheet is only a moderate conductor of electricity since mobility of electrons is only a necessary but not a sufficient condition to an electronic conductor. The other requirement is that there is enough charge carriers available to provide a large current in response to a given applied voltage. SWCNT can be either metallic or semiconducting, depending on its the atomic structure. By configuring the atomic structure, density of states at the Fermi energy, i.e. number of electrons near the Fermi energy, can be controlled. The atomic structure can be expressed in terms of tube chirality or helicity which is defined by the chiral vector (n,m) and the chiral angle. When the difference n-m is a multiple of three, a metallic nanotube is obtained. Otherwise, a semiconducting nanotube is obtained [10].
82
4
Thiolated borazine cyclancenes
SWCNTs are very attractive due to their unique properties but their energy gaps normally are less than 2.0 eV [1] which is not big enough to satisfy devises in electronics in some cases. Single wall boron nitride nanotubes (SWBNNTs) show quite larger band gaps comparing with SWCNTs. We performed a theoretical research with unrestricted density functional theory (DFT) on benzene and borazine cyclancenes, (BN)n (Fig-1), which are the unit fragments and possible precursors of BN nanotubles. The calculation results show that the frontier orbitals, HOMO-LUMO gaps (Agap) in (BN)n increase steadily with borazine number (n) and stabilizes at -6.7 eV for n> 9. In contrast to the carbon cyclacene system where the gap decreases and approaches that of the semiconducting carbon nanotube system (-1.13 eV) for n>8. In addition, Agap of SWBNNTs are little affected by chiral vectors (n,m) or chiral angles that is much different form SWCNTs. If boron or nitrogen atoms were replaced by carbon atoms, (BN)n will become (BCN)n and Agap will change accordingly. Our calculation results show that Agap strongly depend on component - how many B or N atoms are replaced, molecular symmetry, the size of the cyclancenes (n) as well as chiral vector. Table-1 lists some calculation results for several (BCN)n structures with n =4 or 6. For most of the (BCN)n (n=4), Agap are narrowed down after inserting carbon atoms instead of boron or nitrogen atoms. While there are two structures, 4R_C_pm and 4R_BC shown in Fig-2, appear even higher Agap after carbon replacement. When the n increases from 4 to 6 for first structure in Fig-2 (6R_C_pm), the Agap drops dramatically from 5.24 eV to 1.20 eV. It shows that (BCN)„ system including many molecules with the energy gap form 1.1 eV to 5.2 eV that allow us to design the molecules or nanotubes with wanted Agap. To study linkage between (BCN)n and metals contacts, we proposed thiolated (BCN)n structures which are prone to link metals such as gold (Au) easily through thiolate bonds. Both HF (HF/3-21G basis) and DFT (UB3LYP/6-31G(d)) are employed for three thiolated borazine cyclancenes. The structures are given in Fig-3 where (a) and (b) are analog. Four thiolic groups on both arenold belts respectively but their substitution are either (a) ortho- or (b) para-. Calculation results are given in Table-2. Due to HartreeFock theory neglects instantaneous electron correlation and is not accurate enough to describe energy of frontier molecular orbitals comparing to DFT method, so we will focus on DFT results. It can be seen that Agap do not change much, actually slightly widen after thionation for these three proposed structures. It implies other (BCN)n may possible to keep Agap relatively steady after thionation which allow scientists to apply them in molecules/nanotubes electronic devices. 5
Conclusions
Intrinsic properties of the molecules as well as nature of the molecule-metal linkage plays an important role in conductance in the molecular electronic device. In this paper, electron transport through molecules/nanotubes, molecular wire, molecular devices and molecule-contact linkage have been reviewed. Borne, carbon and nitrogen mixed cyclancenes, (CBN)„, are investigated by using ab intio methods HF and DFT. The results show that (BCN)n system includes many molecules with variable energy gap in a large range form 1.1 eV to 5.2 eV and thionations affect energy gaps little. These mean that thiolated (BCN)n structures could be potential candidate in application to molecular electronics.
83
6
References
1. Yang S W, et al., , "Ab intio Studies of Borazine and Benzene Cyclacenes", Accepted by Diamond and Related Material 2. Reed, M A., Proceedings of the IEEE, 87(4):652-658, April 1999 3. Guo J, et al, APPLIED PHYSICS LETTERS 80 (17): 3192-3194 APR 29 2002 4. Joachim C, et al., NATURE 408 (6812): 541-548 NOV 30 2000 5. Ellenbogen J C, et al., Proceedings of the IEEE, 88(3):386-426 March 2000 6. Park J, et al., Nature; 417; 722 - 725; Jun 2002 7. SeminarioJM, etal.,1 Am. Chem. Soc; 121(2); 411-416; 1999. 8. Ward M D, et al., J. Chem. Educ. 78(3), 321, March, 2001 9. Thostenson E T, et al., Composites Science and Technology; 61; 1899-1912; 2001 10. Srivastava D, et al., Computing in Science & Engineering, 3(4); pp. 42-55; July 2001
Table-1: Bonding Energy Agap of (BCN)„ with different carbon replacement n. File Name 4R 2R 4R BP 4R_C_pm 4R BC 4R BN m 4R_BNLp 4R_CN 4R C 4R_1 6R_C_pm
Component
Bonging E HOMO LUMO Gap B4C8N4H8 -144.1 -4.88 -3.08 1.8 B8P8H8 -101.41 -6.39 -4.23 2.15 B4C8N4H8 -6.35 -140.85 -1.13 5.23 B8C8H8 -5.85 -1.68 4.17 -131.16 B4C8N4H8 -5.64 -139.49 -2.16 3.48 B4C8N4H8 -5.75 -138.67 -2.77 2.98 C8N8H8 -141.98 -4.57 -1.77 2.8 C16H8 -4.9 -1.47 3.43 -323.05 B8N8H8 -310.13 -6.7 -2.92 3.78 -3.81 B6C10N6H10 -214.96 -2.61 1.2
; O o
Fig-1: 3-D drawing of 6-ring borazene cyclacene, side view (left) and top view (right). Red: B atom, blue: N atom and grey: H atom.
--
o
BV' (b)
^B ^N 4R_BC (4.53 eV)
Fig-3: Thiolated borazine cyclancenes, (a) 4HS-8BN4SH_o (top-view), (b) 4HS-8BN-4SH_p side-view.
N
ypB C
4R_C_pm (5.24 eV)
Fig-2: Unit structures (BCN)n (n=4 or 6)
Table-2: Energy gaps of (BCN)„ before and after thionation (eV).
HF
FTD
n 4HS-8BN-4SH 0 4HS-8BN-4SH_p (BN)8 (BN)7 4HS-8BN-4SH o 4HS-8BN-4SH p 7BN-SH
HOMO Gap2 HOMO Gapl HOMO Gap LUMO Gap+ LUMO Gap+ LUMO +2 2 1 +3 -2 -1 -6.83 0.05 -6.88 6.26 -0.62 0.2 -0.42 0.05 -0.36 -6.8 0.03 -6.78 0.06 -6.84 6.21 -0.46 0.04 -0.42 -6.75 0.03 -0.63 0.17 -6.77 0 -6.77 6.52 0.23 0.23 -6.81 0.04 -0.25 0.48 0.06 0.01 0.07 -6.63 0 -6.63 5.96 -0.67 0.73 -7.35 0.72 3.74 0.03 3.77 3.26 0.48 -9.98 0.09 -10.07 0.05 -10.12 13.38 3.66 0.03 3.69 0.36 -9.94 0.08 -10.02 0.05 -10.08 13.38 3.3 -9.89 0.11 -10 12.68 2.68 0.08 2.76 0.09 2.85 -9.6 0.29
CFD ANALYSIS OF FILM COOLING OF A CYLINDRICAL LEADING EDGE WITH COMPOUND ANGLE INJECTION Bijendra Singh Chufal, A.R. Srikrishnan Fluent India, Green Terraces, South Koregaon Park, Pune-411 001, India E-mail:
[email protected] INTRODUCTION Film cooling is an effective method for providing thermal protection to the blades of high-performance gas turbines that operate under elevated temperatures. In this method, coolant gas is tapped from the compressor of the engine, and injected through holes on the blade surface to the high temperature boundary layer on it, thereby providing a protective film over the surface. Several parameters like the density ratio between the coolant and the hot gas, the blowing ratio, the angle of injection, relative locations of the injection holes on the surface and free stream turbulence intensity significantly influence the film cooling performance. Optimization of the mass flow rate of the coolant is essential for efficient operation of the system. Compound angle injection, where the coolant jets issue from multiple rows at different angles is found to be more effective in providing film protection to the blade than simple angle injection [1]. In the research on film cooling, computational studies have a great potential as they can be instrumental in evaluating the role of each of the above parameters on the cooling effectiveness. However, intricate geometric features coupled with the complexities in the flowfield due to the anisotropy of turbulence, thermal mixing of coolant jets etc. pose severe challenges to the numerical modeling of film cooling. Many studies conducted in the recent years were confined to simple geometries like flat plates [3], which do not represent the geometric features of turbine blades. The present study is a CFD analysis of film cooling with compound angle injection, on a cylindrical leading edge which is geometrically representative of the leading edge of a turbine blade. As opposed to the flat plate, the cylindrical leading edge provides a close approximation of the blade geometry and Cruse et al. [2] have presented experimental data for cooling effectiveness for this geometry. The present study makes use of FLUENT, a commercial multipurpose CFD code, for the computational analysis. First part of the study is a validation of the code by comparing the simulation results with experimental data reported in [1]. The second part is focused on analyzing the effect of varying the blowing ratio on the effectiveness of film cooling. Blowing ratio refers to the ratio of mass fluxes (density x velocity) of the coolant and the hot fluid (main stream). A low value of blowing ratio may result in inadequate cooling and a high value leads to an excessive loss in output power (as more working fluid is tapped out from the compressor). Hence optimization of the blowing ratio is essential for improving the efficiency of film cooling. THE GEOMETRY, FLOW DOMAIN AND BOUNDARY CONDITIONS Figure 1 shows the geometry considered in the present study. This is the computational representation of the experimental setup used in [1]. The model surface has two rows of holes -through which the coolant is injected- at an angle of 25° with each
84
85
other. The angle of injection is 20° with lateral direction. In the computational domain, periodicity is assumed between neighboring pair of holes and a horizontal plane of symmetry is assumed so that only one half of the surface needs to be modeled.
hot stre im in I t
coolant Injection holes
Figure 1: A Schematic diagram of the computational domain The free stream (relatively hot air) enters the domain at a velocity of 10 m/s and turbulence intensity of 0.5%. Inlet conditions of the coolant are specified using mass-flux values calculated based on the blowing ratio. Inlet temperatures of the 'hot' and cold streams are 300 K and 166 K respectively. The blade surface is modeled as an adiabatic wall. RESULTS AND DISCUSSION Part - 1 Validation Studies The experimental data [2] on adiabatic cooling effectiveness r| for this geometry were used in the validation study. The adiabatic cooling effectiveness is defined as the difference between the local wall temperature and the main stream temperature normalized by the the difference between the coolant inlet temperature Tcooiant, and the main stream temperature, To=. That is, r\= (Twan - T„)/(Tcooiant - T„). F; o [ixpenrocnial Experimental CFD: Present Work \ — CI-T):Thakurctal. - CPI): Present Work - CFD: Thafcur et al. "\ \\ 0.4 x s /°
I
V -
V^~---.__
< 0.2
J
surface coordinate, s/d
Figure 3: Comparison of predicted spanwise average of effectiveness with experimental data Figure 2 shows the distribution of adiabatic effectiveness at a location corresponding to s/d = 4.89 on the blade surface (s/d represents distance along the surface of the cylindrical
Figure 2: Comparison of predicted distribution effectiveness with experimental data
86
edge, normalized by the diameter of the injection hole). The plots compare results of the present study with the experimental data of Cruse et al. [2] as well as with the simulation results of another CFD study of this problem reported recently by Thakur et al. [4]. The predictions of our analysis show good agreement with the measured data. A comparison of the span wise averaged value of r) is shown in Figure 3. The results of our study match very well the experimental data both qualitatively and quantitatively. The validation study shows that the code (FLUENT) predicts the cooling effectiveness with good accuracy. Some deviation from the experimental data is observed near the periodic boundaries, which could be primarily due to the fact that the numerical study assumes spanwise periodicity between a pair of injection holes whereas the experimental setup deviates slightly from the ideal periodic conditions [4]. Part - 2 Analysis of the effect of Blowing Ratio After validating the code, further studies were conducted to analyze the effect of blowing ratio (BR), which is one of the most important parameters in film cooling. To improve the overall efficiency of this method of cooling, it is essential to employ an optimum value of blowing ratio. In the present study, a number of simulations were carried out using different values of blowing ratio (ranging from BR = 0.5 to BR = 4.0) and in each case, the velocity and temperature fields were analyzed. In Figure 4, the variation of (spanwise averaged) cooling effectiveness with the blowing ratio is plotted at various streamwise locations. An important characteristic of the plots is the yield of diminishing returns with increase in blowing ratio after a certain range. That is, while increasing the blowing ratio beyond say, 2.0, the resultant increase in effectiveness becomes progressively less. This can be readily inferred from the plot in Figure 4 and the quantification of this trend is an important outcome of the present study. The extent (or "depth") of penetration of the jet into the mainstream directly influences the cooling effectiveness. The more the jet penetrates into the hot stream, lesser will be the cooling effect on the surface. Based on a detailed examination of the contour plots of the flow variables, we find that the density distribution on a transverse plane can be used as a measure to quantify the penetration of the coolant at any location in the flow field (please note that the coolant density is 1.8 times larger than density of the main stream and density of the 'mixed' stream is calculated using weighted averaging). We use the local density ratio, LDR (defined as the ratio of the local value of density to the density of the hot fluid), as a parameter to assess the extent of penetration of the coolant. Figure 5 compares the LDR distributions for the blowing ratios of 0.5 and 4.0. The difference is to be noticed: At blowing ratio = 4.0, the curve indicates an increase in concentration of the coolant farther from the surface (at higher y/d) which in turn, is a result of the coolant jet dissipating deeper into the mainstream. The observation that the penetration increases prominently with increase in blowing ratio substantiates the increasingly lower gain in effectiveness at higher blowing ratios (Fig. 4), discussed above. The temperature field on the leading edge surface is compared in Figure 6 for blowing ratios of 1 and 4. The predominantly three dimensional nature of the higher blowing ratio case stems from the lateral spreading of the coolant jet by way of its higher momentum
87
component in the transverse (z-) direction. For blowing ratio in the range of 0.5 • 1.0, the coolant jets just get spread along the direction of the mainstream (Figure 6-a).
Normal distance above surface, y/d
Figure 4: The increase in average effectiveness with blowing ratio at various axial locations
Figure 5: The variation of density ratio in a direction normal to the blade surface, at s/d ~ 12
Figure 6-a: Temperature contours on the surface for blowing ratio = 1
Figure 6-b: Temperature contours on the surface for blowing ratio = 4
CONCLUSION Accurate prediction of film cooling on a three dimensional, cylindrical leading edge is achieved using a commercially available multipurpose CFD solver. The study provides quantitative insight to the variation of the cooling effectiveness with blowing ratio. It is found that a blowing ratio of 2 will be the optimum for a configuration like this. REFERENCES 1. Azzi, M.Abidat, B.A. Jubran and G.S. Theodoridis "Film Cooling Predictions of Simple and Compound Angle Injection from one and two Staggered Rows", Journal of Numerical Heat Transfer. Part - A, Volume 40, 2001, pp 273-294. 2. Cruse, M.W., Yuki U.M. and Bogard, D.G. "Investigation of Variuos Parametric Influences on Leading Edge Film Cooling", ASME Paper 97-GT-296, 1997. 3. Amer A.A., Jubran B.A. and Hamdan, M.A. "Comparison of different twoequation Turbulence Models for Prediction of Film Cooling from two Rows of Holes", Numerical Heat Transfer -Part A, Volume 21, 1992, pp 143-162 4. Thakur, S.S., Wright J.A. and Shyy, W., "Convective Film Cooling over a Representative Turbine Blade Leading Edge", International Journal of Heat and Mass Transfer, Volume 42, 1999, pp 2269-2285
FLOW ANALYSIS IN PORT AND CYLINDER OF A SPARK IGNITION ENGINE WITH OBLIQUE VALVE LUOMAJI
CHENGUOHUA
College of Energy and Power Huazhong
MAYUANHAO Engineering,
University of Science and Technology, Wuhan, 430074, E-mail:
[email protected]
China
In this paper, a numerical analytic model based on the KIVA-3 code is developed for the threedimensional transient intake flow in a small high-speed two-valve-per-cylinder motorcycle engine, including a moving piston and a moving inclined intake valve. The valve model adopts the bodyfitted technique, the dynamic grids induced by the moving piston and moving valve are automatically generated by the snapper technique and the grid re-meshing technique separately. Turbulence is represented by RNG k-«model. The calculated results reveal the formation of the incylinder tumble motion, the variation of tumble ratios and the cylinder pressure. Comparison with the measured engine cylinder pressure shows that the simulation result is generally in good agreement with the experiment. The simulation results provide important information for the design of engine intake system.
1
Introduction
The in-cylinder flow of an internal combustion engine has great effect on the major engine performance characteristics such as the efficiency, combustion stability, heat loss, emission of NOx and hydrocarbon, etc[l]. The in-cylinder flow structure set up by the intake process is affected greatly by the intake system design. Facts show that the intake system with a semi-sphere combustion chamber and a radial port is very effective to the small high-speed two-valve-per-cylinder motorcycle engines, but there are few researches on the complex intake flow phenomena in such engines. Transient numerical simulation of the intake flow has been a challenging task because of the complicated geometry with moving piston and valves. The KTVA-3 code[2] has been widely used in multi-dimensional numerical simulation of the flow, combustion and emission in internal combustion engines. But it can not deal with the moving valve. In order to conduct 3D transient numerical simulation of intake flow in the intake port-valve-cylinder system on a high speed small gasoline engine, a bodyfitted valve model is added to KTVA-3 code. The valve model put forward within this paper can treat vertical and inclined valves, and has higher calculation precision. 2
Numerical Methods
The governing equations of gas flow consist of the mass, momentum and energy conservation equations, turbulence equations, gas state relation and other auxiliary relations. The details can see Ref.[3]. But the turbulence is represented by the RNG k-e model that developed by Yakhot et al[4]. The governing equations are discretized by the arbitrary Lagrangian-Eurian (ALE) method for structured non-orthogonal meshes. A transient solution to the discretized governing equations is marched out in a sequence of time steps or cycles. 88
89
3
Valve Model
To exactly fit the valve shape, the body-fitted technique is used to establish the valve model. In the body-fitted valve model, the shape of the valve (including the valve stem) is represented by surface body-fitted grid in the grid generation, and vertices on the surface body-fitted grids move according to the valve moving schedules in the flow calculation. The valve moving schedules include the intake valve lift profile and the intake valve moving velocity profile, as shown as Fig. 1(a) and (b).
Crank Angle (degree)
Crank Angle (degree)
(a)
Intake valve lift profile (b) Intake valve velocity profile Fig. 1 Intake valve moving schedules
4
Geometry and Grid Generation
Fig. 2 Computational grids of the intake port-valve-cylinder
The geometry used in this study is the exact geometry of the intake port-valvecylinder system in a high-speed small motorcycle engine. To generate the 3D bodyfitted grid for the computational domain, the commercial software Pro/Engineering is used to build the 3D geometry model and then is imported to the commercial software ICEM-CFD to generate the complex grid (Fig.2). Due to the piston and valve movement, the computational domain is continuously varying as a function of crank angle in 3D transient simulation of the intake process. In order to dynamically adopt the computational grids to the variation of the computational domain, the computational grids are rezoned at different positions of the piston and valve. The snapper technique is used to maintain a reasonable axial mesh size as the piston moves between the top dead center (TDC) and the bottom dead center (BDC). The dynamic grids induced by the valve movement are generated by the grid re-meshing method. The basic idea of this method is to regenerate the local grids near the valve on each time step (corresponding to each new valve position). The re-meshing grids are generated by the elliptic grid generation approach. 5
Calculation Results and Discussions
The calculation is carried out throughout the intake process, starting at the intake valve opening (IVO, at 0°ATDC, after top dead center) and ending at the intake valve closure (IVC, at 200°ATDC).
90
5.1
Velocity Fields
The velocity fields on the xz-plane, that is the symmetric plane of the port and the cylinder, are shown at different crank angles in Fig. 3. The phenomenon such as the backflow into the intake port, the dual-vortex structure and the large scale tumbling motion can be observed.The flow field evolution on the xz-plane indicates that the incylinder tumble motion is formed at the late stage of the intake process, and the incylinder flow structure set up during the intake process mainly affected by the flow toward the exhaust side.
10.10°CA
5.2
120.05°CA Fig. 3 Velocity fields on the xz-plane
200.03°CA
Pressure Fields
The pressure distributions on the xz-plane are shown in Fig. 4. They indicate the behaviors of flow resistance during the intake process are different. During the early and late intake process, due to the low valve lift, the intake pressure loss is principally caused by the valve's obstruction. During the middle intake process (from 60°CA to 120°CA), the intake lift becomes higher and the loss is dominated by the resistance of the intake port. The pressure distributions in the cylinder are uneven during the intake process.
20.09°CA
100.17°CA Fig. 4 Pressure fields on the xz-plane
125.07°CA
5.3 Integrate Flow Parameters To characterize the in-cylinder large-scale flow structure, tumble ratios R^ and Ra defined as Reference [5] are calculated. Fig 5 shows variations in the i?^,and
91
Rtx with respect to the crank angle. In-cylinder mean pressure p
t
is an important parameter for the in-cylinder gas
state. Fig 8 shows the variation in /? j with respect to the crank angle. It indicates that the in-cylinder mean pressure is fluctuating during the intake process. 5.4 Result Validation At present, it is difficult to perform velocity measurements for the transient flow fields in high-speed small engines with bores under 60 mm and speeds over 3000r/min. In this paper, the cylinder pressure is measured on the running engine to valid the calculated results. Fig 6 shows cylinder pressures versus crank angle for the experiment and computation during the intake process. It is showed that they have good agreement. 1.20 1.15 1.10 1.05 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0 60 20
40
60
80 100 120 140 160 180 200
'**-*-:
A/ 20
Crank Angle (degree)
Fig. 5 Variation of tumble ratio R^
- Computed Measured
40
60
80 100 120 140 160 180 200
Crank Angle(degree)
and R.^
Fig. 6 Comparison of computed and measured cylinder pressure
6
Conclusions
Within this paper flow analysis in the port and cylinder of a spark ignition engine with oblique valve is performed. The body-fitted valve model put forward can be used to treat the vertical and oblique valves. Detail information about the flow field is obtained. Simulation results are helpful to understand the complex flow phenomena during the intake process and provide theoretical basis for optimizing the structure of the engine intake system.
92
References 1. Shi Shao-xi., "Recent progress in combustion technologies for automotive engines", Combustion Science and Technology (Chinese), 7»1«, pp. 1-15, 2001. 2. Amsden A A, "KTVA-3: A KTVA program with block-structured mesh for complex geometries", Los Alamos National Laboratory Report LA-12503-MS, March 1993. 3. Amsden A A, O'Rourke P J, Butler T D, "KTVA-II: A computer program for chemically reactive flows with sprays", Los Alamos National Laboratory Report LA-11560-MS, May 1989. 4. Yakhot V, Orszag S A, "Renormalization group analysis of turbulence I - basic theory", Journal of scientific computing, vol 1, pp. 39-51,1986. 5. W T Kim, K Y Huh, J W Lee, et al, "Numerical simulation of intake and compression flow in a four-valve pent-roof spark ignition engine and validation with LDV data", Proc Instn Mech Engrs, Vol 214 Part D, pp. 361-372, 2000.
ANALYSIS OF CHEMICAL REACTIONS IN ARGON THERMAL PLASMA FLOW USING THE EDDY DISSIPATION CONCEPT K. SUNDARAVADIVELU, H. W. NG, S. C. M. YU, J. C. CHAI AND Y. C. LAM School of Mechanical and Production Engineering, Nanyang Technological University, Nanyang Avenue, Singapore - 639798 E-mail:
[email protected] Thermal and fluid flow characteristics of argon plasma coupled with particle dynamics is investigated in the presence of most effective chemical reactions. The reaction rate in turbulent flows is determined by the eddy dissipation concept using Fluent 6.0. Plasma temperature, velocity, mass fractions, particle temperature and velocity distributions are presented and discussed. A modification to the standard eddy dissipation model (EDM) is carried out to improve the reaction rate calculations, based on the Saha equation. This eliminated one of the basic assumptions of the EDM that the temperature should be sufficient for a chemical reaction to occur. The most unique aspect of this modified model is that, it can handle any order of ionization reactions. A comparison between the standard EDM and the modified EDM is made and physical explanations for the choice of the modified EDM is provided to substantiate its usefulness.
1
Introduction
Thermal plasma spraying techniques are widely used to produce protective coatings of high melting point and highly reactive materials and may also be used to manufacture particulate or fibre-reinforced ceramic or metal matrix composite deposits, [1]. Currently optimization of thermal spraying techniques is achieved by empirical means and there is still insufficient scientific understanding of the physical mechanisms controlling plasma gas and entrained particle behavior. Because of the extremely high temperatures and velocities, it becomes difficult to measure gas and particle temperatures and velocities in a plasma jet, although some experimental data has been obtained using specialized techniques. Therefore in the absence of conventional experimental techniques, numerical modeling has been promoted as a method to investigate the fundamental behavior of the plasma gas and particles, and as an aid too to optimize the plasma spraying processing conditions. Numerous efforts have been made to date to calculate the temperature, velocity of the plasma jet together with the particle dynamics [2], but with less attention paid to model chemical reactions that are inevitable in high temperature gas dynamics. Therefore in this work we propose a modified version of an existing chemical reaction rate model and study the resulting gas dynamics together with the subsequent particle transport phenomena. 2
Mathematical Model
The governing equations of turbulent plasma flow consist of the conservation of mass, momentum, species and energy equations in computational domain shown in figure 1. The fully elliptic Navier-Stokes equations together with the standard K-e turbulent model govern the above conservations laws. It is assumed that the plasma is in local thermodynamic equilibrium, thermodynamic and transport properties are temperature dependent and radiation effects are negligible. The steady state conservation equations are written in their general form as:
93
94
where <j) is the process variable and is listed below together with their respective diffusion coefficients and source terms are listed in table 1. Table 1: Equation
Variable (0)
Mass Momentum Energy Species Turbulence
1 u,v T Xi K,
e
Diffusion Coefficient (-T) -
Source Term (.St) -
r
SE+Zh.R, ILMjRi
a
A, Yt
£ k - P £ > c i £ ~Gk
G
K
-C2Ep
£2 — K
The reaction rate /?, in the source term is calculated using the standard Eddy Dissipation Model (EDM) and is expressed as i) R, = A.c, (e I K) and ii) Rf = AZf (e I K\X, which is the modified EDM or (MEDM). The quantities appearing in the above expressions viz., A, cf are respectively the empirical constant and time mean concentration of reacting species. The additional term % appearing in the MEDM is the degree of a reaction, calculated from the well know Saha equation, X2(y-X2TX =2QiQ^(2me)V2(kT)5,2(h3Pr1 exp(-E/kT), [1], in order to make the EDM, a temperature dependent one. Although eddy dissipation models are purely empirical, it is found to yield reasonable results. Quantities ht and M, appearing in the source terms are the heat of reaction and molecular weight of i'h species respectively. To account for the heating of primary gas by the electric arc we assume a volume averaged energy source term, as SE =(P0Ut /Anode volume), where Pou, is the torch power output calculated through the arc voltage, E, the arc current, I and the torch efficiency, r|t, assumed here to be 70 % (For details see [2]). In figure 1, the mass flow rate of argon gas is specified (2 g/s) at the inlet AB, together with a volume averaged heat source of 2.64 x 101 inside the nozzle calculated using the above equation for SE, upon using 2.1 kW of torch power output. At the solid boundaries (BC, CD, DE), the velocity is assumed to be zero and the temperature is specified at 500 K. At the free plasma plume, the free boundaries at EF and FG are assumed to be at a constant pressure of one atmosphere and at ambient temperature of 300 K. Another boundary condition to be specified is the mass fraction (m) of argon which was set at inlet (AB) m = 1 and at free boundaries m = 0. The mass fractions of the air species are set to be 0 at the inlet and 0.8 at the free boundaries. The governing equations are solved using the well-known SIMPLE technique based on control volume theory that is built in Fluent 6.0. 3
Results and Discussions
Figure 2 depicts the centerline plasma temperature and velocity together with the respective experimental temperature data. Numerical prediction is found to be in good agreement. The computed mass fractions of different chemical species in the presence of five different chemical reactions viz., two dissociation reactions involving molecular oxygen and nitrogen and three first order ionization reactions involving atomic argon,
95
oxygen and nitrogen, are shown in figure 4. Argon mass fraction computed numerically is found to match well the experimental data. As the first order argon ionization reaction is not that effective for the computed temperature range, the resulting mass fraction of ionized argon species is found to be small. The air species mass fractions are found to be significant in the downstream of the torch and thus clearly revealing the exact location of ambient air entrainment. Mass creation of atomic oxygen is found to be significant when compared with that of atomic nitrogen from their respective molecular dissociation reactions. This is as expected, because the oxygen molecule is of higher molecular weight, than that of nitrogen molecule, and hence it may travel with a low velocity so that the interaction among oxygen molecules may be more significant. On calculating the ionization reaction rates, not reported here, of atomic oxygen and nitrogen, it is found that nitrogen ionization reaction rate is higher. This is attributed to the low molecular weight of nitrogen and so that it can travel faster and may interact with electrons that are traveling with high velocity. Figure 3 depicts the difference in the calculated mass fractions of argon through the EDM and the MEDM. Mass fraction of the singly ionized argon species predicted by the standard EDM is found to be significantly high when compared with that of predicted by MEDM. The former (EDM result) is not realistic because the Saha equation reveals that the maximum degree of the first order argon ionization reaction in our computed temperature range should be less than 0.1 and is not met by the standard EDM. This is because the standard EDM is not temperature limited, whereas the MEDM predicts the mass fraction within the Saha equations' limit. Figures 5 and 6 present the particle velocity and temperature at an injection velocity of 20 m/s and for different particle dimensions. It is observed from figure 6 that a particle of diameter above 80 \xm is melted completely. The arrow in this figure indicates the melting temperature of the solid alumina particle. References 1. Boulos M.I., Fauchais P. and Pfender E., Thermal plasmas: Fundamentals and Applications, Plenum press, New York (1994). 2. Remesh K., Particle behavior and coating formation in plasma spray process, Ph.D. Thesis, Nanyang Technological University, Singapore (2002). 3. Chang C.H. and Ramshaw J.D., Numerical simulations of argon plasma jets flowing into cold air, Plasma Chemistry and Plasma Processing, 13 (1992) pp. 189-209.
Powder Injection Channel Torch Body
Free Plasma Plume
mt (
ymrrietry Axis
Nozzle Particle Injection Position 120
Figure 1 Schematic diagram of the computational domain (unts in mm).
96
I
100-Temperature (K) - Velocity (m/s) Fincke et al. (Refer to [3])
10-
1
0.02 0.04 0.06 0.08 0.1 0.12
0.04
AAxial Distance (m)
0.06
0.08
Axial Distance (m)
Figure 2 Axial dependence of flow characteristics
Figure 3 Comparison of Ar+ mass fractions.
0.06
0.03,
0
0.02 0.04 0.06 0.08
0.1
0.06
0.12
Axial Distance (m)
Figure 4 Axial dependence of various species mass fractions.
d = 20 micron d = 40 micron d = 80 micron
0.02
0.04
0.06
0.08
0.1
Axial Distance (m)
Figure 5 Particle velocity.
0.1:
0
0.02 0.04 0.06 0.08 0.1 0.12 Axial Distance (m)
Figure 6 Particle temperature.
NUMERICAL SIMULATION OF 2-D REACTING FLOW IN NOZZLE OF LIQUID ROCKET MOTOR QIANG HONGFU,* YANG YUECHENG AND XIA XUELI Xi 'an Hi-Tech Research Institute, Hongqing Town, Xi'an, Shaanxi, PRC, 710025 Email address:
[email protected] This paper presents a numerical method to calculate combustion coupled ejection flow in nozzle processes in Liquid Rocket Motor (LRM). A two-dimensional axi-symmetric numerical simulation for the injector element-combustor-and-nozzle model is carried out using the Finite Different (FD) method. In the simulation, the available Computational Fluid Dynamics (CFD) software FLUENT is employed with three key enhancements for material modelling. Firstly, the influence of the twophase reacting flow is considered, in which the coupled implicit two-step finite difference method to solve the Re-averaged conjugated N-S equation with component conservative equation is used. Secondly, the 17-component, 12-step finite-rate chemical reaction model is employed. Thirdly, the Baldwin-Lomax model is used as turbulence model. These three enhancements are incorporated into the FLUENT code through its user subroutine capability. For both ignition and exhausted stages, the unsteady flow method is used while the steady flow method is adopted for the normally working stage. The distributions of the flow parameter in the combustor-nozzle system are achieved. In addition, the variations of flow parameter along with the time in different stages are also obtained. The results obtained from the numerical simulation are compared with independently available field tests data. Good agreement is observed.
KEYWORDS Combustion, Chemical Reaction flow, Finite-rate model, N-S equations, Nozzle, Liquid Rocket Motor
1
INTRODUCTION
The computer simulating technology for the test firings of LRM is a relative new and developing research method, in which the computer image processing, combustion theory, and flow analysis technology are integrated. It plays an increasingly important role in detailed analyzing complex physical-chemical phenomena including mixing, combustion and flow in entire LRM. Many endeavours were conducted in turbulence modelling on combustion [1-3, 5] and dynamic modelling on low frequency combustion [4]. However, little attention on turbulence combustion coupled flow in a nozzle domain is considered, i.e., numerical simulation for the entire LRM working process, this paper tries to explore the probability for it, and it is proved that numerical simulation for test firing process of LRM is feasible. In this paper, the influence of the two-phase flow is considered and the coupled implicit two-step finite difference method to solute the Re-averaged conjugated N-S equation with component conservative equation is used in the combustion coupled viscous flow in the nozzle system. For ignition and exhausted stages, the unsteady flow method is applied while the steady flow method is adopted for the operating process. Amongst them, the 17component, 12-step finite-rate chemical reaction model is employed and the BaldwinLomax model is used as turbulence model. Numerical simulations are performed widely, many results were obtained including both chamber and nozzle, and then compared with the available experimental data, good agreement is observed.
97
98
2
NUMERICAL MODELLING
2.1
Chemical dynamics model of combustion
The reacting products after mixing and combustion violently are very complicated in the combustor, simultaneously accompanying high temperature in a very short time, this procedure leads to fast decomposition and the distribution proportion of the internal energy for all products in all degrees of freedom. 17-component, 12-element chemical reaction model is employed in the model. The reaction equations are as followings:
CH3NHNHCH3 + 3.2HN03 <=> 2C02 +5.6H20 + 2.6N2 CH3NHNHCH3 + 2N20A <=> 2C02 + AH20 + 3N2 H2Ott-H2+OH 2 2 N2+02^2NO
C02aCO C02+H2^CO
+ -02 2 + H20
2HN03 <^> N2OA + H20 + -02 NO + HN03 d 3N02 + H20 H2 ^>2H 02 O 20 2NO + 02d 2N02 N2 <=> 2N All the above is incorporated in by means of the finite-rate-model (FRM), regarding to this model you can refer to [1]. 2.2
Control equations
If we ignored the gravitational body force, heat radiation and taking the combustor as an adiabatic system, the conservative N-S equation of 2-D axi-symmetric and incompressible flow can be expressed as [4]:
U,+Fx+Gy=±{Rx
+ Sy)
K
e
where
U =[p,pu,pv,e]T , F =[pu,pu2 + p,puv]T , G = [pv,puv,pv2 + p,v2(e + p)f ,R =[0,T ;ty ,T w ,5 4 ] r , p=
(y-l)[e-p(u2+v2)/2]T
and other variables can be indicated in [2] due to the length of paper. 2.3
Turbulence model
Regarding to the study, the k- £ turbulence model using RNG algorithm which comes from non-conservative N-S equation is used and its transportation equation is:
99
DkL_d_ dk P— = ^((XkHeff —) + Gk+Gb-pekM Dt ~~ dx. * to/
YM
p = ia M )+c iGt+c Gb) c p
^ ir ' ^ ^
^ ~ ^ T~R
where, all the variables in above on can be indicated in [5] for the limitation of the paper. 2.4
Boundary conditions
•
Inlet B.C. The inlet B.C. is determined by fuel-oxygen injector located at the head of the combustor, it is a group of spray flows, the B.C. includes the given velocity, the pressure, the temperature, the flow flux, as well as the certain spray angle and rotational angular velocity. • Wall B.C. The wall of the combustor and the nozzles are assumed to be adiabatic, of which the zero-slide grids are used and the boundary layer effects are taken into account. The temperature, pressure and mass fraction of ingredients are conveniently obtained by extrapolating from their first order derivatives, while the energy is obtained by extrapolating form second order derivative as, ut \w=0
and dX/dn\w=0,
where X
represents the temperature, pressure and other ingredients. The gas is taken as viscous gas, whose density is calculated from the state equation of the gas. • Axisymmetric B.C. The axisymmetric B.C. can be used by the symmetry of the structure. • Outlet B.C. The certain extension of the outlet boundary condition is used at the outside of nozzle. The values of the ambient pressure, the circumfluence temperature, the turbulence intensity and the hydraulic diameter etc. are given at the outlet boundary. 3
NUMERICAL EXAMPLE
An example is included to illustrate the results of the three enhancements incorporated. The LRM consists of head and body two parts, the former consists of injector and combustor, the latter consists of nozzle mainly. In order to study behaviours for reacting flow along the nozzle, the 2-D integrated model for injector element-combustor-andnozzle model is established by consideration of solid structure and the periodicity and symmetry of the flow distribution. The B.C. is given by design requirements and the computation domain is divided accurately by using quadrilateral grids with GAMBIT preprocessor. There are 5046 elements and 5217 nodes, including 186 elements and 282 nodes for the shell part, 3720 elements and 4059 nodes for the inner flow field, 1239 elements and 1140 nodes for the outer flow field, see Figure. 1. The simulation results are showed in Figure 2 to Figure 6. Figure 2 showed the Mach number distribution of flow field under stable condition. The others showed the unstable condition including both ignition and exhausted stages. • Stage of ignition
100 Figure 2 showed the thrust reaching 229.5 KN within 0.39 seconds, and satisfied the design requirement for reaching 30% of the rated propulsion within 0.5 seconds during the stage of ignition.
.F*""
Oct 20,1999 FLUENT 5 1 (2d. coupled imp. spofl, mgho) C s K V W l 9t MldYiriinlsU'
JIttipri siijaj. ^wpjetliwpiipa rn#
Figure 1 The 2-D mesh for LRM model
Figure 2 The mach number distribution of flow field
- Experiment -Simulation
Time (S)
Time (S)
Figure 4 Chamber pressure curves of at the stage of ignition
Figure 3 Thrust curves at the stage of ignition
- Experiment - Simulation
-1—'
1 S
'—r6
7
6
Time (S)
Figure 5 Thrust curves at the stage of exhausted
5
6
7
8
Time (S)
Figure 6 Chamber pressure curves of at the stage of exhausted
Figure 3-4 showed simulation results are lower than that of experimental data. What the reasons are: firstly, the ageing of propellant does not be considered, simultaneously, the
101
data of the propellant energy characteristics are not very accurate; Secondly, the vaporization model is not ideal than that of practical condition, so leads to the low chemical reacting energy. • Stage of stable The design values of the thrust are among 240±2KN. The low divergence of the curve shows the good stable flow. For the space limit, the plots are ignored. • Stage of exhausted Figures 5-6 showed both thrust and chamber pressure satisfied requirement for design value within less than 1.2 seconds when shut down. What the simulation results are lower than that of experimental data is similar to the stage of ignition. 4
CONCLUSIONS
The results showed this method could be applied in large complex LRM system numerical simulation. The major performance data agree with those of the experimental ones. The divergence is less than 10% of the experimental data amongst ignition, steady and exhausted stages. All of them reflect the correctness and validity of the simulation model. Through this research work, a new method using geometry modelling for entities of LRM, physical modelling for turbulence combustion and flowing as well as data analysis is given. This new method can be applied to replace part of engineering experimental work, and it explores a new way on how to prolong the service life of the rocket motor. REFERENCE 1. Magnussen B.F. and Hjertager B.H., One mathematical models of turbulent combustion with special emphasis on soot formation and combustion. In 16th Symp. (Int'l.) on Combustion. The Combustion Institute, 1976. 2. Gran I.R., Ertesvag I.S. and Magnussen B.F., Influence of turbulence modeling on predictions of turbulent combustion. AIAA Journal, 35 (1997) pp. 106-110. 3. Gran I.R. and Magnussen B.F., A numerical study of a bluff-body stabilized diffusion flame. 2. Influence of combustion modeling and finite-rate chemistry. Combustion Science and Technology, 119 (1996) pp. 191-217. 4. Karabeyoglu MA, Altman D.Dynamic modeling of hybrid rocket combustion. Journal of Propulsion and Power, 15(1999) pp. 562-571. 5. Choudhury. D., Introduction to the renormalization group method and turbulence modeling. Fluent Inc. Technical Memorandum TM-107, 1993. Correspondence author. Present address: Centre for ACES, Department of Mechanical Engineering, National University of Singapore, Kent Ridge Crescent, Singapore 119260. Tel.: +65-68744796; fax: +65-68744795. E-mail,
[email protected].
SIMULATIONS OF THE ONSET OF CONVECTION IN A NONNEWTONIAN LIQUID UNDER FIXED SURFACE TEMPERATURE BOUNDARY CONDITION KEE CHIEN TING Department
Of Chemical Engineering, Faculty of Engineering, Loughborough, LEU 3TU, UK E-mail:
[email protected]
Loughborough
University,
KA KHENG TAN AND THOMAS S. Y. CHOONG Department Of Chemical and Environmental Engineering, Faculty of Universiti Putra Malaysia, 43400 Serdang, Selangor Darul Ehsan, E-mail:
[email protected];
[email protected]
Engineering, Malaysia
The onset of convection in a non-Newtonian liquid under Fixed Surface Temperature (FST) boundary condition has been simulated using a CFD package by Tan et al. (2000). For timedependent bottom-heating simulations, onset of convection were found to occur in a continuous shear thinning non-Newtonian liquid bounded by two horizontal rigid surfaces with fixed surface temperature and adiabatic vertical walls. In this study, further simulations were conducted for nonNewtonian liquid with flow behavior index n in the range of 0.70 to 0.94. Also, the liquid properties used in this study were based on Tien et al.'s (1969) experimental data for CMC (Carboxy Methyl Cellulose). Simulation results were found to be in good agreement with Tan et o/.'s (2000) result where critical transient Rayleigh number for non-Newtonian liquid was found to vary with flow behavior n of the Power Law model.
1
Introduction
Lord Rayleigh (1916) studied the onset of buoyancy convection in a horizontal liquid layer bounded by two free surfaces based on an adverse linear temperature gradient. He showed that convection occurred when the value of Rayleigh number (Ra^gaATa^/vK = gafiATcf/vK) exceeded its critical value. For natural convection induced by a time-dependent and non-linear temperature profile in a deep fluid, Tan and Thorpe (1996) developed a new transient Rayleigh number for the deep fluid under various boundary conditions. They defined a transient Rayleigh number as a function of penetration depth, z, and the local temperature gradient clfT/dz as Ra=gccz4(dT/dz)/vK They also proposed that the correct way to begin any stability analysis is to identify the Biot number. Tan et al. (2000) successfully simulated the onset of convection in a non-Newtonian liquid under Fixed Surface Temperature (FST) boundary condition using a commercial Computational Fluid Dynamics (CFD) package. They successfully applied the critical transient Rayleigh number
102
103
for non-Newtonian liquid Ra^c derived by Tan (1994) to show that RCINNC for non-Newtonian liquid varies with flow behavior n. However, Tan et a/.'s (2000) simulations were conducted for a limited range of flow behavior index n. Moreover, properties of dilute nonNewtonian liquid were assumed to be similar to that of water, as suggested by earlier researchers (Tien et al, 1969; Liang & Acrivos, 1970; Ghani et al, 1999). Although their simulations showed convincing results, further verifications for a wider range of n and with real CMC properties were deemed necessary. In this study, a computational fluid dynamic (CFD) package FLUENT was used to simulate the onset of convection in the non-Newtonian liquid with n in the range of 0.70 to 0.94. Carboxy Methyl Cellulose (CMC) properties used in Tien et a/.'s (1969) experiment were adopted. Simulation results were again analyzed using Tan's (1994) theory of transient convection in non-Newtonian liquid. Results obtained in this study will be compared with Tan et a/.'s (2000) results. 2
Theory
The detailed mathematical derivation for the transient critical Rayleigh number for non-Newtonian liquid Ra^c can be found in Tan (1994) and a summary is shown in Tan et al. (2000). Recalling the maximum transient Rayleigh number, which at the onset of convection may be expressed in terms of critical time, tc, as: Ra *vuAWmax
_P8<x(4 + 4nrnJtXn(T0-Ts){ —
„.
/—
(Hn)] Lc
J
W
KylK
For Newtonian liquid, n = 1, Eq.(l) becomes; 4.89
gafiC{T0-Ts)
^max =
(2) V
3
Methods
In this study, 2-D time-dependant simulations with setups identical to Tan et a/.'s (2000) study were conducted. Liquids were bounded by two rigid surfaces. The vertical walls were kept adiabatic. The top and bottom surfaces were held at initial temperature T=293K and at time t = 0s, the bottom surface was suddenly heated by an increase of temperature to
104
T+AT. CMC with n and K values as tabulated in TABLE 1 were simulated. TABLE 1: Properties of non-Newtonian liquid, CMC (Tien et al. 1969).
n CMC-A CMC-B CMC-C
4
0.94 0.85 0.70
K (Pa.sn) 0.337 1.130 0.331
P (kg/m3) 0.995* 103 1.014*103 1.010*103
a
cP
(K"1) 5.51*10" 4 4.43* 10"4 4.93* 10"4
(J/kg.K) 4.187*103 4.187*103 4.187*103
k (W/m. K.) 6.11*10"' 6.49*10"' 6.77*10"'
Results and Discussion
The critical times and the critical transient Rayleigh numbers for the bottom heating of glycerine and non-Newtonian liquid under FST boundary condition obtained from the simulations is tabulated in TABLE2. The maximum transient Rayleigh number at the critical time for nonNewtonian liquid RaNNc were calculated using Eq.(l). RaNNc versus consistency index, n, in comparison to the value obtained from Tien et al. (1969) were plotted in FIGURE 1. TABLE 2: Critical times and critical transient Rayleigh Numbers for bottom heating of glycerine (Tan et al., 2000) and non-Newtonian liquid under FST boundary condition.
Glycerine
CMC-A
CMC-B
CMC-C
0.94 0.337
0.85 1.130
0.70 0.331
(Tan et al, 2000)
n K
1.00 1.350
4T=50K
tc Rac
80 1465
tc RaNNc
120 1303
270 527
230 540
AT=25K
tc Rac
180 1530
tc RaNNc
170 1076
400 447
260 313
AT=\0 K
tc Rac
450 1434
105 10000
1000
*
z z This study CMC-A • CMC-B
100
• CMC-C _ Tien et al. (1969) - - -Ozoe&Churchill (1972)
Tan et al. (2000) • Glycerine • CMC-1 CMC-2 • CMC-3 CMC-4
10 0.4
0.6
0.8
FIGURE 1 : Ramc versus n for non-Newtonian liquid under FST boundary condition.
5
Conclusion
Simulations were successfully conducted for non-Newtonian liquid CMC with real properties and with flow behavior index n between 0.94 and 0.70. Further verifications were successfully carried out for critical transient Rayleigh number Ramc for non-Newtonian liquid derived by Tan (1994) under FST boundary condition. Critical transient Rayleigh number for non-Newtonian liquid was found to vary with flow behavior n. References Ghani, A. G. Abdul, Farid, M.M., Chen, X.D. & Richard, P., "Numerical simulation of natural convection heating of canned food by computational fluid dynamics", J. Food Engng, 41 (1999), pp. 55-64,.
2. Liang, S.F. & Acrivos, A., "Experiments on buoyancy driven convection in non-Newtonian fluid", Rheologica Acta, Band 9 (1970), Heft 3, pp. 447-455. 3. Ozoe, Hiroyuki & Churchill, S.W., "Hydrodynamic stability and natural convection in Ostwald-de Waele and Ellis fluids : the development of a numerical solution", AICHE Journal, vol. 18 (1972), no.6, pp. 1196-1207. 4. Rayleigh, Lord, "On convective currents in a horizontal layer of fluid when the higher temperature is on the under side", Philos. Mag., 32 (1916), pp.529. 5. Tien, C , Tsuei, H. S. & Sun, Z. S., "Thermal instability of a horizontal layer of non-Newtonian fluid heated from below", Int. J. Heat Mass Transfer, 12 (1969), pp. 1173-1178. 6. Tan K. K., Gas diffusion into viscous and non-newtonian liquids and the onset of convection, Ph.D. dissertation, Cambridge University, 1994. 7. Tan K. K. & Thorpe, R. B., "The onset of convection caused by buoyancy during transient heat conduction in deep fluids", Chem. Engng Sci, 51(17) (1996), pp.4127. 8. Tan K. K., Ting K. C. & Thomas S.Y. Choong, "Simulations of the onset of convection in a non-Newtonian liquid under Fixed Surface Temperature boundary condition", Proceeding of Chemical and Process Engineering Conference 2000, Singapore, 2000. Nomenclature d g k q t T AT Ra n K z
Total depth of liquid layer (m) Gravitational acceleration (m/s2) Thermal conductivity (W/m. K) Heat flux (W/m2) Time (s) Temperature (K) Temperature difference between top and bottom surface (K) Rayleigh number Flow behaviour index in Power Law model Consistency index (Pa.sn) Vertical distance in liquid measured from the bounding surface (m)
107
Greek Symbols a P K \i v p
Volumetric coefficient of thermal expansion (K"1) (Constant) temperature gradient (°C/m); f3=AT/d Thermal diffusivity (m2/s) Viscosity (Pa.s) Kinematic Viscosity (m2/s) Density (kg/m3)
Abbreviation CFD FST NN CMC
Computational Fluid Dynamics Fixed Surface Temperature Non-Newtonian liquid Carboxy Metyhl Celulose
Subscripts c 0 s max
Critical Initial state Surface Maximum
COMPUTER VISUALIZATION OF FLUID CIRCULATION IN ANNULI OF HEATED ROTATING CYLINDERS OF LOW PRANDTL NUMBER FLUIDS
XU ZHIDAO, HUO YUNLONG & TS LEE(*) Mechanical Engineering Department National University of Singapore Singapore 119260 (*) Corresponding Author
The present work considered fluid circulation in an annular region between two cylinders with the inner cylinder heated and rotating. The Prandtl number (Pr) considered here varies from 0.01 to 1.0 and Rayleigh number (Ra) is of the order of 10 . Reynolds number Re in the range of 0 to 1120 was considered. Mono-thermal plume above the stationary inner was observed for higher Prandtl number fluids (Pr»0.1) while bithermal plume above the stationary inner cylinder was observed for lower Prandtl number fluids (Pr«0.1). However, when the inner cylinder is made to rotate, the thermal plume for higher and lower Prandtl number fluids were observed to move in different directions. The mechanism of the mono- and bi-thermal plumes movements were investigated through numerical flow visualization. The application of these studies with rotating inner cylinders are typically encounter in the food and medical processing industries
1.
Introduction and Reviews
Modes of fluid circulation and Heat Transfer in the annuli of stationary concentric horizontal cylinders of different fluids were first investigated by Kuehn and Goldstein's (1980). For the present study, the inner cylinder is assumed heated and rotating at Reynolds number in the range of 0 to 1200. The effects of centrifugal acceleration and three dimensional Taylor vortices are considered negligible in the range of parameters studied. The Prandtl number considered here varies from 0.01 to 1.0 and Rayleigh number varies from 10 to 10 . Due to the limitation of the data available from experimental work[Kuehn and Goldstein's (1980)], the radius ratio of the cylinders considered here is fixed at 2.5 [Lee et al (1984-2002)]. In the present study, natural convection is driven by vertical temperature gradient and vertical gravity force. The interaction with the effect of high rotational rate of the inner cylinder is expected to lead to complicated three-dimensional flows with Taylor vortices. Hence, the present study [Figure 1] also purposely limits the calculations to a range of parameters that would exclude this possibility. Details of the numerical methods are given in Lee(1998) and will not be repeated here.
108
109
Figure I C<>-»rili«i»tt SystWf inAiuiular Region _
j
™
* - . . : - „
'.».. :'
• :
#^vy * ' " - ^
\
^: :• ^ ::: •--•••••
• . .
X \
•'' ^
' -
^ s
Figure 2 total Nusseltwttli RsMkm ®f Inner tG}.0; RR^2,5; ;Pr»l,0; Ra« 10 )
Figure 3 Rotational Strrajnlincsantflsothertis
110
SntEAMtJNSS ;
; Rgu re 4 tffecfs of in lierCylittder R»Mttta ' # « ; RR=£:S:; :Fr=CH02<Mfci*ury); M = W?:,
<«i «*>*#. '= .
".=,1000 . .
Pigtire 5 • Effects, af Iim^r:Cylifi:a#r^la4ioii. on .MEfcao .••• A « m o « s m e e t o
.e - ^ ^ ' WB.-WS
j2#g
ftumJtMutator •
111 2.
Results and Remarks
Figures 2 and 3 shows a sample of the results. For fluid with Pr of the order of 0.02(Mercury), symmetrical bi-thermal plume was observed above the inner cylinder for the case of stationary inner cylinder [Figure 4]. Two secondary cells were formed in addition to the main cells. Below these two cells, two small bubbles which correspond to the reattachment of the boundary layer are observed. The flow pattern in the annulus is thus observed to be multi-cellular. The heat transfer characteristics for these fluid flow with low Prandtl number were found to have points of maximum and minimum at the interior nodes, instead of the top and bottom nodes which is known for the higher Prandtl number fluids. The immediate effect of rotating the inner cylinder is to cause the two smaller bubbles to collapse. The net effect is that a single thermal plume is observed to move in the direction opposite to that of the inner rotating cylinder. This thermal plume movement is different and opposite to that observed for the higher Prandtl number (Pr»0.10) fluid flow where the mono-thermal plume on top of the inner cylinder moves in the same direction as the rotation of the inner cylinder. The mean Nusselt number characterictics for various eccentric annular region is shown in Figure 5.
References 1. Kuehn, T.H. and Goldstein RJ.(1980), "A parametric study of Prandtl number and diameter ratio effects on Natural Convection Heat Transfer in Horizontal Cylinder annuli", J. Heat Transfer, Vol. 102, pp.768-770. 2. T.S. Lee, "Numerical Experiments with Laminar fluid Convection between Concentric and Eccentric Heated Rotating Cylinders", Int. J. Numerical Heat Transfer, Vol.7, No.l, pp.77-87, 1984. 3. T.S. Lee, N.E. Wijeysundera & K.S. Yeo, "Convection in Eccentric Annuli with Inner Cylinder Rotation", AIAA Journal, Vol. 24, No.l, January, 1986. pp.170-171. 4. T.S. Lee, "Mixed Convection of Low Prandtl Number Fluids in the Annuli of Concentric Rotating Cylinders", AIAA Journal . Vol.6, No.l. January-March 1992, pp. 162-165. 5. T.S.Lee, "Laminar Fluid Convection between Concentric and Eccentric Heated Horizontal Rotating Cylinders for Low Prandtl Number Fluids.", Int.J.Numerical Methods in Fluids. Vol.14, No.9, 1992. pp.1037-1062. 6. T.S.Lee, "Numerical Computation of Fluid Convection with Air Enclosed between the Annuli of Eccentric Heated Horizontal Rotating Cylinders", Computers and Fluids, Vol.21, pp.355-368, 1992. 7. T.S.Lee, "Mixed Recirculatory Flow in the Annuli of Stationary and Rotating Cylinders with Different Radius Ratios", Int. J. Numerical Methods for Heat and Fluid Flow". Vol.4, No.6, December 1994. pp. 561-573. 8. T..S.Lee, "Numerical Study of Mixed Heat and Fluid Flow in Annuli of Heated Rotating Cylinders", Int.J. CFD, 1998, Vol.9, pp.151-163. 9. TS Lee, GS Hu and C Shu, "Application of GDQ Method for the Study of Natural Convection in Horizontal Eccentric Annuli", Numerical Heat Transfer, Part A, Vol.41, September 2002, pp.803-815.
FINITE ELEMENT ANALYSIS OF HOLLOW BRICK DRYING IN FORCED AND MIXED CONVECTION ENVIRONMENTS H.N. SURESH AND J. RAVI KUMAR Military College of Electronics and Mechanical Engineering, Secunderabad - 500 015, India, E-mail:
[email protected] P.A. A. NARAYANA AND K.N. SEETHARAMU Universiti of Sains, Tronoh, Malayasia, E-mail:
[email protected] A system of coupled non-linear partial differential equations, for flow field and solid in the forced and mixed convection environments, which represent the heat and mass balances in the solid and air phases of the systems undergoing drying are solved. The buoyancy effects due to temperature and concentration on the temperature and moisture content distributions at the interface of the solid have been studied. Insulated and convective boundary conditions are imposed on the inner sides of the hollow brick. An interesting observation on temperature and moisture distribution within the solid and also along the solid surface is discussed. Results of early hours of drying are presented. Non-uniform distribution of temperature and moisture contours within the solid is noticed during early hours of forced convection drying. Whereas in mixed convection drying, in addition to non-uniform distribution of temperature and moisture contours within the solid, the rate of evaporation is high on the top surface of the solid. INTRODUCTION Evaporating drying has an important application in drying of porous materials such as foodstuffs, ceramic products, clay products, wood etc. to remove volatile liquid. But in the cases of preservation of food product and manufacture of ceramic products like bricks and tiles, drying phenomenon is more complex because of their size and shape [1]. The different regimes of drying have been studied theoretically either using Luikov's model [2] which based on irreversible thermodynamics or Whitaker's continuum approach [1]. The drying of porous material have been studied using one-dimensional [3] and twodimensional [4] models, using heat and mass transfer from the available correlation using boundary layer equations. Since the actual process of drying is a conjugate problem, the heat and mass transfer, to and from the porous solid have to be studied along with the flow field. Conjugate analysis of drying [5] also show that the drying behaviour differs from that obtained by decoupled analysis due to temperature and concentration nonhomogeneties at the solid-fluid interface. In the present work, two-dimensional Navier-Stokes equations have been solved for the flow field with and without additional buoyancy terms, resulting from temperature and concentration gradients, in the Y-momentum equation coupled with energy and moisture transport equations. Convective boundary conditions are imposed on top, left and right sides of the two-dimensional hollow brick. Insulated and convective boundary conditions are imposed on the inner sides of the hollow brick. Buoyancy effects, at low velocity, during forced convection drying environment is analyzed. An interesting observation on temperature and moisture distribution within the solid and also along the solid surface is discussed.
112
113
SOLUTION METHODOLOGY Air with a uniform free stream velocity of U is assumed to flow over a hollow brick, placed on a flat surface as shown in Fig.l. The brick is assume to be saturated with water. The temperature of the brick is less than that of air and the water evaporates from the brick due to the concentration difference between the brick surface and the ambient (7). %-r,;:m=u ,o=c,*=o: HowDoiiUin:
„ c
":< B
„: =
c
HpUawiBMck ••••••/
.p-o;
c *
-E±]|/ - • - - . . - • . • . •
L
, j
ft
.•
Fig. 1 Schematic diagram of Computational domain GOVERNING EQUATIONS FOR THE FLOW FIELD For the flow domain, the Navier-Stokes equations (for forced and mixed convection environments), energy equation and the moisture transport equation are considered (6). The governing equations are solved using corresponding boundary conditions (6). GOVERNING EQUATIONS FOR THE POROUS SOLID Using Darcy's law for capillary liquid mass flux and Fick's law for diffusive mass flux, the final form of energy and moisture conservation equations can be obtained in terms of the equivalent medium properties [4]. The top, left and right surfaces of the solid experience the interface boundary conditions, while the bottom surface is insulated. RESULTS AND DISCUSSION Computations were performed for the conjugate drying analysis of a hollow brick, under forced and mixed convection drying environments, as shown in Fig. 1. The bottom side of the hollow brick is assumed to be adiabatic for heat and moisture transfer. During conjugate analysis, two types of boundary conditions are imposed on the inner sides of the hollow brick. They are (i) Insulated boundary conditions and (ii) Convective boundary conditions. The hollow brick is assumed to be at initial moisture content of 0.13 kg/kg of dry solid and temperature of 303 K. The drying medium is assumed to be same at 303 K with 50% relative humidity. Comparison of temperature and moisture content distributions along the outer surface of the solid, due to insulated and convective boundary conditions, after 12 hours of drying are shown in Figs. 2(a) and 2(b) respectively. It is observed that, with both the boundary conditions, the solid cools faster at the leading edge corner B and temperature distribution is almost identical along the surface of the brick. The latent heat of evaporation is absorbed more from the left surface of the solid. Fig. 2(b) shows that, the evaporation rate is high with convective boundary conditions when compared with that of insulated boundary conditions. Also, evaporation rate is more on the top side, due to convective boundary conditions, when compared to insulated boundary conditions, since moisture transfer takes place from both
114
inner and outer surfaces of the solid with convective boundary conditions and also thickness of the brick, from the top surface, is small. Comparison of temperature contours obtained due to insulated and convective boundary conditions, after 12 hours of drying, are shown in Fig. 3. Figs. 4(a) and 4(b) shows the moisture contours obtained due to convective and insulted boundary conditions. It is observed that the solid cools faster with insulted boundary conditions when compared to convective boundary conditions. Temperature and concentration gradients are high at the leading edge due front stagnation effect. The effects of the thermal and concentration boundary layer over the solid are clearly indicated by the non-uniform distribution of temperature and moisture content of the solid. During forced convection drying, the evaporation rate is high with convective boundary conditions when compared with that of insulted boundary conditions. Hence at the leading edge the moisture content, with convective boundary conditions, reduces from initial value of 0.13 to 0.1139 kg/kg of dry solid whereas with insulated conditions it reduces to 0.1184 kg/kg of dry solid. Average moisture content variations are compared with time due to convective and insulted boundary conditions are shown in Fig. 5. It is observed that average moisture content decreases with time in both the situations. The decrease rate is high during brick drying with convective boundary conditions, from initial value of 0.13 to 0.12 kg/kg of dry solid, when compared to insulted boundary conditions, from 0.13 to 0.127 kg/kg of solid. Comparison of temperature contours obtained due to insulated and convective boundary conditions after 12 hours of hollow brick drying are shown in Fig. 6. It is observed that the solid cools faster with convective boundary conditions when compared to insulated boundary conditions and gradients are high at the leading edge due front stagnation effect. Moisture contours after 12 hours of mixed convection drying with convective and insulated boundary conditions on the inner side of the hollow brick are shown in Figs. 7(a) and 7(b) respectively. It is observed from the above figures that, with convective boundary conditions, moisture content at the leading edge of the solid reduces from the initial value of 0.13 to 0.1057 kg/kg of solid, whereas with insulated boundary conditions, it reduces to 0.1081 kg/kg of dry solid. Hence the moisture evaporation is more with convective boundary than with insulated boundary conditions. The effects of the thermal and concentration boundary layer over the solid are clearly indicated by the non-uniform distribution of temperature and moisture content at the surface of the solid. Comparison of temperature distributions along the outer surface of the solid, due to insulated and convective boundary conditions, after 12 hours of mixed convection drying are shown in Fig. 8. It is observed from the above figure that, the solid outer surface temperature drop more with insulated boundary conditions when compared to convective boundary conditions. This is because the latent heat of evaporation is absorbed from the outer surface of the solid with insulated boundary conditions whereas it takes place from both outer and inner surface of the solid with convective boundary conditions. Due to thermal boundary layer temperature drop at leading edge corner B is more compared to other regions of solid. Fig. 9 indicates the moisture content distribution along the surfaces of the solid. It is seen from Fig. 9 that, the moisture evaporates more on the outer surface of the solid with convective boundary conditions when compared to insulted boundary conditions, since the moisture transfer takes place from both inner and outer surfaces of the solid with convective boundary conditions.
115
t = 12 hrs C T = 303 K
4> =
5 0 %
ABLeft BC Top CD Right I - Inside Convectionf — Inside Insulated
Length (m) Fig. 2(b) Comparison of moisture content distribution along the surface of the hollow brick
Length (m) Fig. 2(a) Comparison of temperature distribution along the surface of the hollow brick
B r
•»
J'
. ^ / *<\
\.
1 - Inside Convection - Inside Insulated
''V D
A
Fig. 3 Comparison of temperature contours
Forced convection
"~ ""— — ' — " —"Ti Fig. 4(a) Moisture contours with " Convective boundary conditions
B_
Re = 200 T = 303 K
>«&o
<j> = 5 0 %
1-24E-001 . .
Averagie moistlire conl
V
1J0E001
Fig. 4(b) Moisture contours with insulted boundary conditions
1.16E00I
. ConvB.C. Insu B . C . I.12E-001 0.00
4.00
S.OD
D
12.00
Time (hours) Fig. 5 Comparison of average moisture content with time B
!
J
—^gyy^M.
—
,C
H Inside convection - - Inside Insulated
.*
c
L $
_1L
Fig. 6 Comparison of temperature c o n t o u r s at the end of 12 hours
Fig. 7(a) Mositure contour at the end of 12 hours (convective boundary conditions)
116
Mixed convection J - A t = 12 hrs / % T = 303 K / 08 \ < | > = 50% , - < ^ /
m,i» . am..so
-
\\
C
/'-'"'
\
/ \ f D
/i
°>,
"* «'s:n
8«S. .10
AB Left BCTop CD Right Inside convection Inside Insulated
n
Length (m) Fig. 8 Comparison of temperature distribution along the surface of the hollow brick
Fig. 7(b) Mositure contour at the end of 12 hours (Insulated boundary conditions)
Mixed convection Mixed convection
Re = 200 T = 303 K 0 = 50%
.12 hrs XJ •• 303 K VC = 50% AB Left BC Top CD Right Inside Convection — -Inside Insulated 02
03
OA
Length (ni) Fig. 9 Comparison of moisture content distribution along the surface of the hollow brick
I'S
0.120 -^
if I
on"
Inside convection Inside Insulated
0.108
Time (hours) Fig. 10 Comparison of average moisture content with time
117 Comparison of average moisture content variation with time, due to convective and insulated boundary conditions on the inner surfaces of the hollow brick are shown in Fig. 10. It is observed that average moisture content decreases with time during both the conditions. With insulated boundary conditions, it reduces from initial value of 0.13 to 0.125 kg/kg of solid and reduces upto 0.117 kg/kg of dry solid with convective boundary conditions. This shows that hollow brick dries earlier with convective boundary conditions. CONCLUSIONS Conjugate transient drying analysis, using FEM, has been carried out under forced convection environments to study the drying behavior of brick. Drying behavior is also studied under mixed convection environments, to study the effect of buoyancy on the drying behavior of hollow brick with convective and insulated boundary conditions on the inner side of the solid. From the present analysis the following points are concluded. •
• •
• • •
Temperature and concentration gradients are high at the leading edge when compared to other regions of the solid. Hence the rate of drying is high at that location. Non-uniform distribution of temperature and moisture in the solid occur due to leading edge effect. In mixed convection drying, in addition to non-uniform distribution of temperature and moisture contours within the solid, the rate of evaporation is high on the top surface of the solid. As expected, average moisture content in the solid decreases linearly with time Overall heat and mass transfer is enhanced from all the sides of the brick due to buoyancy effects. Solid dries faster with convective type of boundary conditions when compared to insulated boundary conditions on the inner sides of solid.
REFERENCES 1. Whitaker,S., A Theory of drying, Advances in Heat Transfer, 13, pp.119-203, 1977. 2. V.Luikov, Heat and mass transfer in capillary porous bodies, Pergamon Press, New York, 1966. 3. Murugesan, K., K.N. Seetharamu and P.A. Aswatha Narayana Heat and Mass Transfer, 32, pp. 81-88, 1996. 4. Ferguson, W. J. and R. W. Lewis, Seventh Int. conference on Numerical Methods in Thermal Problems, Vol. VII, Part.2, pp. 973-984, Stanford, 1991. 5. Dolinsky, A. SH. Dorfman and B.V.Davydenko, Int.J.Heat Mass Transfer, 34, 28832889, 1991 6. Murugesan K., H.N. Suresh, K. N. Seetharamu, P. A. Aswatha Narayana and T.Sundararajan, A theoretical model of brick drying as a conjugate problem, International Journal of Heat Mass Transfer Vol. 44, pp. 4075 -4086, 2001. 7. Suresh H.N., P. A. Aswatha Narayana and K. N. Seetharamu, (2001) Conjugate mixed convection heat and mass transfer in brick drying, Journal Heat and Mass Transfer Vol. 37 pp. 205-213
HIGH ACCURACY SIMULATION OF MULTI-MEDIUM FLOW C.W. Wang 1 , T.G.Liu 1 , B.C.Khoo 2 Institute of High Performance Computing The Capricorn Science Park II, 117528, Singapore Department of Mechanical Engineering National University of Singapore, 10 Kent Ridge Crescent, Singapo