This page intentionally left blank
POLARIZATION HOLOGRAPHY
Current research into holography is concerned with applic...
163 downloads
1735 Views
3MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
This page intentionally left blank
POLARIZATION HOLOGRAPHY
Current research into holography is concerned with applications in optically storing, retrieving, and processing information. Polarization holography has many unique properties compared with conventional holography, such as high efficiency, achromaticity, and special polarization properties. This book reviews the research carried out in this field over the last 15 years. The authors provide basic concepts in polarization and the propagation of light through anisotropic materials, before presenting a sound theoretical basis for polarization holography. The fabrication and characterization of azobenzenebased materials, which remain the most efficient for the purpose, are described in detail. This is followed by a description of other materials that are used in polarization holography. An in-depth description of various applications, including display holography and optical storage, is given, and the book concludes with perspectives for the future. This book is an important reference for researchers. l. nikolova is an Associate Professor in the Central Laboratory of Optical Storage and Processing of Information, Bulgarian Academy of Science. She has been working in the field of polarization holography and photoanisotropic materials for 30 years. p. s. ramanujam is a Professor in the Department of Photonics Engineering at the Technical University of Denmark. His current research interests are in optical data storage, holography, and Raman spectroscopy.
POLARIZATION HOLOGRAPHY L. NIKOLOVA Bulgarian Academy of Sciences, Sofia
P. S. RAMANUJAM Technical University of Denmark, Roskilde
CAMBRIDGE UNIVERSITY PRESS
Cambridge, New York, Melbourne, Madrid, Cape Town, Singapore, São Paulo Cambridge University Press The Edinburgh Building, Cambridge CB2 8RU, UK Published in the United States of America by Cambridge University Press, New York www.cambridge.org Information on this title: www.cambridge.org/9780521509756 © L. Nikolova and P. S. Ramanujam 2009 This publication is in copyright. Subject to statutory exception and to the provision of relevant collective licensing agreements, no reproduction of any part may take place without the written permission of Cambridge University Press. First published in print format 2009
ISBN-13
978-0-511-53998-5
eBook (EBL)
ISBN-13
978-0-521-50975-6
hardback
Cambridge University Press has no responsibility for the persistence or accuracy of urls for external or third-party internet websites referred to in this publication, and does not guarantee that any content on such websites is, or will remain, accurate or appropriate.
Contents
Preface List of symbols and abbreviations 1 Light polarization 1.1 Linearly polarized light 1.2 Circularly polarized light 1.3 Elliptically polarized light 1.4 Jones vectors 1.5 The coherency matrix 1.6 Stokes parameters and the Stokes vector 1.7 The Poincare´ sphere References 2 Light propagation through polarizing systems 2.1 Materials with optical anisotropy 2.2 The Jones-matrix formalism 2.3 The coherency-matrix formalism 2.4 The Mueller-matrix formalism References 3 Theory of polarization holography 3.1 Plane-wave interference and holography 3.2 Interference of polarized light 3.3 Introduction to polarization holography 3.4 Poincare´ representation of resulting polarization states 3.5 Polarization holography in materials with only linear photoanisotropy 3.6 Transmission polarization holograms 3.7 Reflection polarization holograms in materials with linear photoanisotropy 3.8 Polarization-holographic recording in materials with linear and circular anisotropy v
page ix xiii 1 2 3 5 6 7 8 11 12 13 13 15 20 21 23 24 24 26 27 30 32 36 60 68
vi
Contents
3.9 Polarization gratings together with a surface relief: orthogonally circularly polarized beams 3.10 Polarization gratings together with a surface relief: orthogonally linearly polarized pumb beams 3.11 Evanescent-wave polarization holography References 4 Azobenzene and azobenzene-containing polymers 4.1 Guest–host systems 4.2 Azobenzene polymers 4.3 Azobenzene peptides 4.4 Azobenzene side-chain polymethacrylates 4.5 Azobenzene dendrimers 4.6 Photoaddressable polymers 4.7 Photorefractive azobenzene polymers 4.8 Polymer photochromic cholesterics 4.9 Experimental techniques – linear anisotropy measurements 4.10 Photoinduced circular anisotropy in side-chain azobenzene polyesters 4.11 The experimental set-up for polarization holography 4.12 Polarization holography in guest–host systems 4.13 Polarization holography in side-chain polyesters 4.14 Polarization holography with surface relief 4.15 Polarization holography with UV light 4.16 Evanescent-wave polarization holography 4.17 Biphotonic polarization holography References 5 Other photoanisotropic materials 5.1 Photoinduced anisotropy in silver-halide materials 5.2 Alkali-halide crystals containing anisotropic color centers 5.3 Arsenic sulfide and arsenic selenide 5.4 Bacteriorhodopsin 5.5 Photoanisotropy in organic dyes 5.6 Polymer systems 5.7 Polymer-dispersed liquid crystals 5.8 Polarization holography in doped photorefractive crystals References 6 Applications of polarization holography 6.1 A Stokesmeter based on a polarization grating 6.2 Polarization-holographic optical elements
74 81 84 85 88 90 91 95 96 98 99 106 107 108 116 118 119 121 125 132 133 134 135 141 141 147 151 154 158 162 165 166 168 174 174 183
Contents
6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12
A bifocal holographic lens A liquid-crystal-based holographic polarization optical element Display holography Holographic data storage Polarization-holographic multiplexing Four-wave mixing and polarization optical phase conjugation A joint transform correlator Fiber Bragg gratings Vectorial photonic crystals in azodye-doped liquid crystals Holographic inscription of helical wavefronts in a liquid-crystal polarization grating 6.13 A polarization-dependent lateral-shearing interferometer 6.14 Other applications References 7 Conclusions and future prospects Index
vii
188 192 196 206 212 215 220 221 222 222 223 225 226 229 236
Preface
In contrast to the conventional holographic process, in which intensity variations in an interference pattern between an object beam and a reference beam are recorded, polarization holography employs beams with two different polarizations for recording information. In this case, the polarization state of the resultant beam is recorded on a suitable medium. This process was discovered by Sh. D. Kakicheshvili, from Georgia (which was then part of the USSR). Currently there is only one monograph on polarization holography, namely that written in Russian by Kakicheshvili (Polyarizatsionnaya golografiya, Nauka, 1989). However, because of its complex presentation, this monograph is not easily amenable for application to practical work. Polarization holographic storage has several unique properties: (1) it is possible to achieve theoretically 100% diffraction efficiency even in thin films; (2) the diffracted beams have unique polarization properties, depending on the polarization of the recording and read-out beams; (3) it is possible to fabricate polarization-sensitive optical elements; and (4) the optical elements fabricated with polarization holography are achromatic, allowing their use at all wavelengths. Our book intends to fill a gap in the area of holography, and documents research done during the last two decades. High-capacity holographic storage remains a hot topic. This book is intended for scientists as well as students at graduate and postgraduate level. A basic undergraduate optics background is assumed, and a well-prepared undergraduate physics major will be able to appreciate the subtleties of polarization holography. The chapters in the book are organized as follows. In the first chapter, a description of the polarization of light is introduced. After discussing the different types of polarization, methods to describe light polarization such as the Jones matrix and Poincare´ sphere are discussed, and a description of Stokes parameters is introduced. ix
x
Preface
In the second chapter, we describe light propagation through polarizing systems. We utilize a matrix formalism to describe the propagation of light through anisotropic media in linear and circular coordinates. The coherencymatrix formalism as well as Mueller matrices are explained. The third chapter provides the basic theory for polarization holography. Polarization modulation through an “interference” of two waves with orthogonal linear and circular polarizations is discussed. Experimental conditions under which these can be achieved are described. A coupled-mode theory for volume holography is also developed. A discussion of polarization holographic gratings with linear photoanisotropy follows. Properties of gratings recorded with orthogonal linear and circular polarized beams, gratings with both amplitude and phase modulation, reconstruction of the polarization of a light field with arbitrary polarization, and reflection polarization holograms are described. We also characterize the influence of a surface relief arising concomitantly with the anisotropic grating, providing a method of separating the contributions to the grating efficiency from the anisotropic and surface-relief gratings. The fourth chapter is devoted to azobenzene and azobenzene-containing polymers, fabrication techniques and experimental results. There is a large amount of literature available on azobenzene systems. This chapter will discuss the different types and properties of the polymers, with particular reference to azobenzene polyesters. We discuss the cases of liquid-crystalline and amorphous polymers, measurement of thermal and light stability of the recorded information etc. We discuss polarization-holographic gratings in materials with linear and circular anisotropy. Again using the Jones-matrix formalism, we discuss the coexistence of both types of anisotropy and the dependence of the properties of the gratings on the ratio of the anisotropy to surface relief. The fifth chapter discusses other non-azobenzene materials for recording photoinduced anisotropy. Silver halides, alkali halides, arsenic trisulfide, bacteriorhodopsin, organic dyes in polymer matrices and other non-azobenzene materials are discussed. The sixth chapter describes applications of polarization holography: polarizationholographic elements for polarimetry, fabrication of polarization-sensitive optical elements, and display holography. The most important is, of course, storage of information. Systems to record bit-maps and multiplexing in polymer films are discussed. The final chapter covers future prospects. We are grateful to many of our colleagues, with whom we had collaborated for many years. In particular, we acknowledge our collaboration with S. Hvilsted, R. H. Berg, A. S. Matharu, T. Todorov, and Ts. Petrova and our
Preface
xi
colleagues at the Technical University of Budapest. We thank L. Lindvold for many useful discussions. The properties of the combined anisotropic and surface-relief gratings presented in this book are from the Ph.D. thesis of N. C. R. Holme, which we gratefully acknowledge. We also thank Michael Diegelmann for giving permission to use his program, in depicting the polarization states in chapter 1 (http://www2.fh-rosenheim.de/~diegelmann/index_English.htm#Polarisation). Special thanks are due to the technical staff who helped us over the years. Finally we thank Dr. Laszlo Gazdag for donating the Gabor medal whose holographic reconstruction is displayed on the cover. We dedicate this book to Sh. D. Kakichashvili, who had the insight to envision vectorial holography. L. Nikolova P. S. Ramanujam
List of symbols and abbreviations
a b c d e h k f w x a1, a 2
K DU Dn Dnlin Dncir Dh Dw k0 Jxx, Jyy, Jyy, Jyz nk n? n0 k 1, k 2
azimuth of linear polarization latitude on the Poincare´ sphere longitude on the Poincare´ sphere phase difference between interfering beams ellipticity angle angle of incidence wavelength of light phase of the electromagnetic wave rotation angle angular frequency of the electromagnetic wave extinction coefficients for the light component polarized and perpendicular to the transmittance axis of the polarizer grating period anisotropy in radians birefringence linear birefringence circular birefringence height of surface relief extra phase acquired in passing through Dh wavelength of light in vacuum elements of the coherency matrix refractive index for light polarization parallel to the induced optical axis refractive index for light polarization perpendicular to the induced optical axis isotropic refractive index absorption coefficients for light polarized parallel and perpendicular to the transmission axis of the polarizer xiii
xiv S L Se Le
s p Dk D? DD a AFM Ag AgBr AgCl AgHal AgI Ar b bR, BR BS CCD d DCG DG DNO DR1 E HeNe HWP i JTC LC LCD LCP LCSLM
Symbols and abbreviations
coefficient of scalar response (refractive index) coefficient of linear anisotropy (refractive index) coefficient of scalar response (absorption) coefficient of linear anisotropy (absorption) polarization of a light beam perpendicular to the plane of incidence polarization of a light beam parallel to the plane of incidence optical density for light polarized parallel to the induced optical axis optical density for light polarized perpendicular to the induced optical axis difference in optical density major axis of the polarization ellipse atomic-force microscope silver silver bromide silver chloride silver halide silver iodide argon minor axis of the polarization ellipse bacteriorhodopsin beamsplitter charge-coupled device thickness of film dichromated gelatin diffraction grating diamino acid – Na-substituted oligopeptide disperse red ethanediol helium–neon half-wave plate imaginary number joint transform correlator liquid crystal liquid-crystal display left-circularly polarized liquid-crystal spatial light modulator
Symbols and abbreviations mW MG P PAP PBS PDG PEO PMMA PVA QWP RCP S 0, S 1, S 2, S 3 SLM SRG Tg THF TN TPMD UV W YAG Xe z
milliwatt malachite green propanediol photoaddressable polymers polarization beamsplitter polarization diffraction grating polyethylene oxide polymethyl methacrylate polyvinyl alcohol quarter-wave plate right-circularly polarized Stokes parameters spatial light modulator surface-relief grating glass-transition temperature tetrahydrofuran twisted nematic triphenylmethane dye ultraviolet watt yttrium–aluminum garnet xenon direction of propagation
xv
1 Light polarization
Several excellent treatises on polarized light exist [1–7]. A wave model of light adequately describes the polarization properties of light in which we are interested. We treat the light as an electromagnetic wave possessing oscillating electric and magnetic fields. These fields are orthogonal to each other. Since in most cases light detection takes place with the help of a photoelectric detector, which detects the square of the electric field, we shall confine ourselves to the case of electric fields. The electric field of a wave propagating along the z direction, with light polarized along the x direction, can be written as ~ Ex ðz; tÞ ¼ ^iEx0 cosðxt kz þ ’Þ:
ð1:1Þ
Here x is the angular frequency of the light wave related to the linear frequency through the relation x ¼ 2pm, k ¼ 2p/k is the wavenumber, where k is the wavelength of light, and ’ denotes the arbitrary phase of the light wave. Ex0 is the amplitude of the light wave. This particular equation represents a planepolarized wave in the xz plane. The resultant electric field of two orthogonally plane-polarized waves combined with different amplitudes and different phases determines the complete state of polarization of the composite wave. The intensity of the light is the average rate of energy flow, and is given by I ¼ ðce0 =2ÞE02 ; ð1:2Þ where c is the velocity of light (3 · 108 m/s), e0 is the permittivity of free space (8.85 · 1012 C2 N1 m2) and E0 is the amplitude of the electric field in V/m. The intensity of light is given in W/m2. Another useful unit is the Einstein, which is equal to an Avogadro number of photons (6.02 · 1023).
1
2
Light polarization
1.1 Linearly polarized light Let us consider two orthogonal fields (figure 1.1) given by ~ Ex ðz; tÞ ¼ ^iE0x cosðxt kzÞ; ~ Ey ðz; tÞ ¼ ^jE0y cosðxt kz þ ’Þ:
ð1:3Þ
Here ^i and ^j represent unit vectors in the x and y directions, respectively. The relative phase difference between the two components is u. When the phase difference between the two components is zero or an integral multiple of p, the waves are in phase and a linearly polarized light wave results when these fields are combined: x
(a)
y
z
(b) x
y
z
Fig. 1.1 Representations of horizontally polarized (left) and vertically polarized (right) light waves.
1.2 Circularly polarized light
3
x
y
z
Fig. 1.2 A linearly polarized light wave at 26.5 to the xz plane.
~ E¼~ Ex þ ~ Ey ¼ ðE0x^i þ E0y^jÞ cosðxt kzÞ:
ð1:4Þ
When the amplitudes are the same, we get linearly polarized light at 45 . When the amplitudes are different, we get linearly polarized light at different azimuths. For example, if E0x ¼ 1 and E0y ¼ 0.5, we get a linearly polarized wave at 26.5 from the xz plane (figure 1.2).
1.2 Circularly polarized light If the phase difference between the two components is (p/2) þ 2mp, where m is zero or a positive or negative integer, and the amplitudes are equal, we get ~ Ey ¼ ^iE0 cosðxt kzÞ þ ^j~ E0 cosðxt kz þ p=2Þ E¼~ Ex þ ~ ¼ E0 ½^i cosðxt kzÞ þ ^j sinðxt kzÞ:
ð1:5Þ
In this case, the magnitude of the electric field is constant in amplitude, but the direction is a function of t and z. We should remark here that the conventions for right- and left-circularly polarized light are different depending upon whether optics or electrical engineering is concerned. Here we shall employ the following convention. The source is located at z, and the observer is at þz. Looking toward the source, the electric field vector rotates counterclockwise. The tip of ~ E traces out a circle. This wave is said to be left-circularly polarized (figure 1.3).
4
Light polarization
x
y
z
Fig. 1.3 A representation of a left-circularly polarized wave. The light source is placed at z, and the observer is situated at þz.
x
y
z
Fig. 1.4 A representation of a right-circularly polarized wave.
On the other hand, if the x component lags (p/2) þ 2mp in phase, we get ~ E¼~ Ex þ ~ Ey ¼ ^iE0 cosðxt kzÞ þ ^j~ E0 cosðxt kz p=2Þ ¼ E0 ½^i cosðxt kzÞ ^j sinðxt kzÞ:
ð1:6Þ
The tip in this case traces out a clockwise circle, and the wave is said to be rightcircularly polarized (figure 1.4).
1.3 Elliptically polarized light
5
1.3 Elliptically polarized light In the most general case, when the amplitudes are unequal, the tip of the electric field vector traces out a counter-clockwise or a clockwise ellipse. Keeping in mind that the electric fields are time-dependent, we can write ~ Ex ¼ ^iE0x cosðxt kzÞ;
~ Ey ¼ ^iE0y cosðxt kz þ ’Þ:
ð1:7Þ
On combining these two equations into a single equation, we get Ex 2 Ey 2 E Ey þ 2 x cos ’ ¼ sin2 ’: 2 E0x E0y E0x E0y 2
ð1:8Þ
This is the equation for an ellipse, commonly called the polarization ellipse, tilted at an angle a to the x-axis. The value of a can be obtained from the equation tanð2aÞ ¼
2E0x E0y cos ’; E0x 2 E0y 2
p 2a þp:
ð1:9Þ
The ellipticity e of the ellipse is defined as the ratio of the length of the semi-minor axis to that of the semi-major axis, e ¼ E0y =E0x ¼ tanjej; p=4 e p=4; e is called the ellipticity angle. Figure 1.5 shows an example of a right-elliptically polarized wave.
x
y
z
Fig. 1.5 A right-elliptically polarized wave.
6
Light polarization
1.4 Jones vectors For simpler mathematical manipulation, a plane monochromatic light wave (equation (1.7)) can be expressed in an equivalent complex exponential form called the Jones vector: ~ E¼
E~x E~y
¼
^iE0x eiðxtkzÞ ^jE0y eiðxtkzþ’Þ :
ð1:10Þ
On dropping the propagator xt kz, the above equation can be written as ~ E¼
Ex Ey
¼
E0x : E0y ei’
ð1:11Þ
The total intensity is I ¼ Ex Ex* þ Ey Ey* ¼ E02 ; E02 is customarily set equal to 1, and the Jones vector is normalized. The Jones vector is used to describe completely polarized light. In this notation, horizontally polarized light is represented as h¼
Ex 0
¼
1 0
ð1:12Þ
since the Jones vector is normalized. Vertically polarized light is represented as 0 v¼ ; 1
ð1:13Þ
light polarized at þ45 as l45
1 ¼ pffiffiffi 2
l45
1 ¼ pffiffiffi 2
1 ; 1
ð1:14Þ
and light polarized at 45 as
1 : 1
ð1:15Þ
For the case of linearly polarized light at an angle a, the Jones vector is given by la ¼
cos a : sin a
Here a is defined as a ¼ arctan Ey =Ex :
ð1:16Þ
1.5 The coherency matrix
Left- and right-circularly polarized light are represented as 1 1 1 i llcp ¼ pffiffiffi ; lrcp ¼ pffiffiffi : 2 1 2 i
7
ð1:17Þ
1.5 The coherency matrix It must be noted that the Jones-vector technique, which is widely used in this book, can be applied only to monochromatic light waves. For quasimonochromatic and not totally polarized light there are two other techniques that can be used: the coherency-matrix formalism and the Stokes-parameters formalism. The coherency matrix is a 2 · 2 Hermitian matrix defined as " J¼
# Ex Ex* Ex Ey* ; Ey Ex Ey Ey
ð1:18Þ
D E where the Ei Ej* denotes the time average of the quantity Ei E*j . It is seen at once that the trace of the matrix SpJ ¼ Jxx þ Jyy
ð1:19Þ
gives the intensity of the light wave. The non-diagonal elements (note that J* xy ¼ Jxy) determine the correlation between the x and y components of the wave. For a totally polarized wave the correlation function Jxy lxy ¼ pffiffiffiffiffiffiffiffiffiffiffiffiffi ¼ 1: Jxx Jyy
ð1:20Þ
For partially polarized light lxy < 1. Here we give the coherency matrices corresponding to several types of totally polarized light waves. Linearly polarized along Ox:
1 0 : Jh ¼ 0 0
ð1:21Þ
Linearly polarized along Oy: Jv ¼
0 0
0 : 1
ð1:22Þ
8
Light polarization Linearly polarized at an angle a: cos2 a Ja ¼ sin a cos a
sin a cos a : sin2 a
ð1:23Þ
Right- or left-circularly polarized: Jr;l
1 1 i : ¼ 2 i 1
ð1:24Þ
1.6 Stokes parameters and the Stokes vector In the most general case, equation (1.3) can be written as ~ Ex ðz; tÞ ¼ ^iE0x cosðxt kz þ ’x Þ; ~ Ey ðz; tÞ ¼ ^jE0y cosðxt kz þ ’y Þ:
ð1:25Þ
Here ’x and ’y represent the phases of the components. Representing the time average of a general quantity a by the symbol hai, the equation for the polarization ellipse can be written as hEx2 ðtÞi hEy2 ðtÞi hEx ðtÞi hEy ðtÞi þ 2 cos ’ ¼ sin2 ’: 2 2 E0x E0y E0x E0y
ð1:26Þ
2 2 Multiplying both sides of equation (1.26) by 4E0x E0y , and rearranging, gives 2 2 4E0y hEx2 ðtÞi þ 4E0y hEy2 ðtÞi 8E0x E0y hEx ðtÞEy ðtÞi cos ’ ¼ ð2E0x E0y sin ’Þ2 : ð1:27Þ
Since the average values are given by the equation 1 hEa ðtÞEb ðtÞi ¼ lim t!1 t
Zt Ea ðtÞEb ðtÞdt;
ð1:28Þ
0
1 hEx2 ðtÞi ¼ E0x2 ; 2
1 2 hEy2 ðtÞi ¼ E0y ; 2
hEx ðtÞEy ðtÞi ¼ cos ’:
On substituting these quantities into (1.27) and simplifying, we get 2 2 2 2 2 2 þ E0y Þ ðE0x E0y Þ ð2E0x E0y cos ’Þ2 ¼ ð2E0x E0y sin ’Þ2 : ðE0x
ð1:29Þ
This equation can be written as S02 S12 S22 ¼ S32 ;
ð1:30Þ
1.6 Stokes parameters
9
where the quantities S0, S1, S2, and S3 are called the Stokes parameters, after George Gabriel Stokes. Stokes parameters represent the different possible states of polarization of a transverse electric (TE) plane wave. This is a set of four real quantities, with the dimensions of intensity. In Cartesian coordinates these are represented as follows: S0 ¼ hEx2 ðtÞi þ Ey2 ðtÞ ; S1 ¼ hEx2 ðtÞi Ey2 ðtÞ ; S2 ¼ 2hEx ðtÞEy ðtÞ cos½’y ðtÞ ’x ðtÞi; S3 ¼ 2hEx ðtÞEy ðtÞ sin½’y ðtÞ ’x ðtÞi:
ð1:31Þ
S0 is the sum of the squares of the electric fields in the x and y directions, and hence represents the total intensity of the light wave. Obviously, this quantity is always positive. The quantity S1 is the difference between the intensities in the x and y directions, showing the preference of the wave relative to the x or y directions; if the quantity is positive, then x polarization is preferred, whereas if it is negative, y polarization is preferred. If the quantity is zero, neither of the two directions is preferred. S2 represents the preference of the wave relative to 45 . If this quantity is positive, þ45 is the preferred direction; if negative, 45 is preferred. The quantity S3 represents the circular component of light. If this quantity is positive, there is a preference for right-circularly polarized light to predominate; if negative, left-circular polarization dominates. If this quantity is zero, there is no ellipticity in the polarization of the light wave. Another representation of equation (1.31) can be written as S0 ¼ Ex Ex* þ Ey Ey* ¼ Jxx þ Jyy ; S1 ¼ Ex Ex* Ey Ey* ¼ Jxx Jyy ; S2 ¼ Ex Ey* þ Ex*Ey ¼ Jxy þ Jyx ; S3 ¼ iðEx Ey* Ex*Ey Þ ¼ iðJxy Jyx Þ; where Jij are the components of the coherency matrix. These parameters can be grouped into a 4 · 1 column vector 2 3 S0 6 S1 7 7 S¼6 4 S2 5 S3
ð1:32Þ
ð1:33Þ
10
Light polarization
called the Stokes vector. This representation allows the use of a compact matrix notation when discussing the passage of a light wave through anisotropic optical elements, as discussed in the next chapter. The Stokes parameters of a totally polarized light beam obey the following condition: S02 ¼ S12 þ S22 þ S32 :
ð1:34Þ
If S02 > S12 þ S22 þ S32 , then the light wave is not totally polarized, and is said to be partially polarized. The degree of polarization p is determined by the ratio p ¼ ðS12 þ S22 þ S32 Þ=S02 ;
p 1:
ð1:35Þ
Examples of Stokes vectors are given below.
1.6.1 Linearly horizontally polarized light 2 3 1 617 7 S ¼ I0 6 4 0 5; 0
ð1:36Þ
where I0 is the total intensity of the light wave.
1.6.2 Linearly vertically polarized light 2 3 1 6 1 7 7 S ¼ I0 6 4 0 5: 0
1.6.3 Linear 45 polarized light 2 3 1 6 0 7 7 S ¼ I0 6 4 1 5: 0
ð1:37Þ
ð1:38Þ
1.7 The Poincare´ sphere
11
1.6.4 Right/left-circularly polarized light 2 3 1 6 0 7 7 S ¼ I0 6 4 0 5: 1
ð1:39Þ
1.7 The Poincare´ sphere H. Poincare´ [8] suggested in 1892 that the states of polarization of a light wave can be uniquely represented as a point on the surface of a unit sphere (figure 1.6). The latitude and longitude of the point are given by 2b, 2c. One chooses arbitrarily a point on the equator of the sphere, and designates it as representing horizontally polarized light, (2b ¼ 0; 2c ¼ 0); the point diametrically opposite then represents vertically polarized light (2c ¼ p; 2b ¼ 0); the “north pole” represents left-circularly polarized light (b ¼ p/2); and the “south pole” represents right-circularly polarized light (b ¼ p/2). All linear states of polarization are
2b
2g H
P
Fig. 1.6 The Poincare´ sphere.
12
Light polarization
represented by points on the equator. In this case, the longitude is equal to twice the angle made with the position of the horizontal polarization. Points at 90 from the horizontal represent linearly polarized beams, polarized at 45 . All elliptical states having the same azimuth (orientation of the major axis) lie on the same longitude, and all elliptical states having the same ellipticity lie on the same latitude. The most powerful application of the Poincare´ sphere lies in tracing the passage of a polarized light wave through birefringent media, through rotations of the Poincare´ sphere, as discussed in several articles by Pancharatnam [9]. In chapter 3, visualization of polarization states resulting when two polarized beams overlap is discussed on the basis of the Poincare´ sphere. The production and analysis of elliptically and circularly polarized light have been discussed in classical texts, e.g., Jenkins and White [10]. References 1. E. Collett. Polarized Light – Fundamentals and Applications. New York: Marcel Dekker (1992). 2. D. S. Kliger, J. W. Lewis, and C. R. Randall. Polarized Light in Optics and Spectroscopy. New York: Academic Press, Inc. (1990). 3. R. M. A. Azzam and N. M. Bashara. Ellipsometry and Polarized Light. Amsterdam: Elsevier (1999). 4. M. Born and E. Wolf. Principles of Optics: Electromagnetic Theory of Propagation, Interference and Diffraction of Light. 7th edition. Cambridge: Cambridge University Press (1999), chapter 10. 5. W. A. Shurcliff. Polarized Light. Cambridge, MA: Harvard University Press (1962). 6. D. Clarke and J. F. Grainger. Polarized Light and Optical Measurement. Oxford: Pergamon Press (1971). 7. E. L. O’Neill. Introduction to Statistical Optics. New York: Dover Publications Inc. (1991). 8. H. Poincare´. The´orie mathe´matique de la lumie`re, edited by G. Carre´, Vol. II. Paris (1892), chapter XII. 9. S. Pancharatnam. Collected Works of S. Pancharatnam. Oxford: Oxford University Press (1975). 10. F. A. Jenkins and H. E. White. Fundamentals of Optics. 4th edition. New York: McGraw-Hill (1981), pp. 564–580.
2 Light propagation through polarizing systems
We shall consider here light propagation through anisotropic materials or polarizing optical elements and systems, and shall describe in brief the methods used to find the changes in light intensity and polarization introduced by these anisotropic elements. 2.1 Materials with optical anisotropy In anisotropic materials the velocity of light propagation depends on the propagation direction. The anisotropy is connected with the structure of the material. Typical materials with optical anisotropy are transparent crystals, and the theory of light propagation through anisotropic media is usually called crystal optics [1–3]. Optical anisotropy is also observed in liquid crystals, and in some amorphous materials subjected to external forces such as mechanical or electrical forces. Stretched polymer films provide a good example. In this book we deal mainly with photoinduced anisotropy. In some materials illumination with polarized light causes selective destruction of absorbing molecules or centers, reordering of these absorbing centers, or some other changes depending on light polarization. This results in polarization-dependent changes in the absorption coefficient or/and in the refractive index of the material, that is, in optical anisotropy. The dependence of the absorbance on light polarization is called dichroism and the dependence of the refractive index on light polarization is called birefringence. When a material is anisotropic, its dielectric permeability is a tensor, and as a consequence the wave surfaces in it are not spherical, but are ellipsoidal. Optical wave propagation is determined by the elliptic cross-section of the ellipsoid of the wave surface with a plane normal to the light-propagation direction. In this type of material, light propagates as two eigenmodes with different polarizations and different velocities. In materials with only linear anisotropy the two 13
14
Propagation through polarizing systems
eigenmodes are linearly polarized in two orthogonal directions coinciding with the axes of the elliptic cross-section. Using Jones notation, in the coordinate system connected with these axes, the eigenmodes of a monochromatic plane wave are presented as 2p 2p 1 0 exp i n1 z ; E2 ¼ exp i n2 z ; ð2:1Þ E1 ¼ 0 1 k k where z is the propagation direction, k is the wavelength, and n1 and n2 are the two different refractive indices. In materials with circular anisotropy the eigenmodes are based on left- and right-circular polarization: 1 2p 1 1 2p 1 Er ¼ pffiffiffi exp i nl z ; exp i nr z : ð2:2Þ El ¼ pffiffiffi k k 2 i 2 i In the general case, in which the material has both linear and circular anisotropy, the eigenmodes are elliptic: 2p 2p a b exp i n1 z ; E2 ¼ exp i n2 z ; ð2:3Þ E1 ¼ ib ia k k where a and b are the semi-axes of the polarization ellipse of the eigenmodes, with a2 þ b2 ¼ 1. When light propagates through a transparent birefringent medium, its state of polarization is generally changed. This change depends on the light-propagation direction, the initial polarization of the light, the wavelength, and the thickness of the material. Let us assume that light of intensity I and linearly polarized at an angle h with respect to the polarization direction of one of the eigenmodes is incident on the material. Let us further assume that the material has only linear anisotropy. The incident beam will be split into two waves: pffiffi cos h expði2pn1 z=kÞ ; E1 ¼ I 0
pffiffi E2 ¼ I
0 : ð2:4Þ sin h expði2pn2 z=kÞ
Then the output wave will be
Eout
cos h expð i2pn1 d=kÞ ¼ ; sin h expð i2pn2 d=kÞ
ð2:5Þ
where d is the thickness of the material. In the general case this wave is elliptically polarized; its ellipticity and polarization azimuth depend on h, d, k, and the difference between the two refractive indices n1 and n2 (the birefringence).
2.2 The Jones-matrix formalism
15
In a material possessing only circular anisotropy, if the incident light is polarized along h ¼ 0, the two eigenmodes will be pffiffi pffiffi 2p 2p I 1 I 1 exp i nl z ; exp i nr z : ð2:6Þ Er ¼ E1 ¼ 2 i 2 i k k In this case the output wave can be written as (dropping the common phase, exp{i(2p/k)[(nl þ nr)d/2]}) pffiffi cos ðadÞ ; ð2:7Þ Eout ¼ I sin ðadÞ where a ¼ p(nl nr)/k. This wave is linearly polarized again but its polarization direction is rotated through an angle ad. The material is said to be “optically active” in this case, and the circular birefringence is nl nr, d being the thickness of the optically active material.
2.2 The Jones-matrix formalism A simple and elegant method for description of the propagation of polarized homogeneous monochromatic plane waves through nondepolarizing anisotropic media or optical elements was first proposed by Jones [4]. A detailed analysis of this formalism can be found in the excellent book of Azzam and Bashara [5]. According to this method the wave at the output of an anisotropic material or a polarizing optical element can be found just by multiplying the Jones vector of the input wave Ein by a 2 · 2 matrix T: Eout ¼ TEin :
ð2:8Þ
The matrix
t T ¼ 11 t21
t12 t22
ð2:9Þ
is called the Jones matrix. Its elements tij are generally complex. They depend on the optical parameters of the material – its absorbance, dichroism, birefringence, and thickness. They also depend on the wavelength and the choice of coordinate system. If the light wave passes consecutively through more than one polarizing element, say N elements, the influence of each of them is described by the corresponding Jones matrix Ti (i ¼ 1, 2, . . . , N). The wave at the output of this optical system with N anisotropic elements is determined by Eout ¼ TN ; TN1 . . . T2 ; T1 Ein :
ð2:10Þ
16
Propagation through polarizing systems
We shall give here the Jones matrices of the most often used polarization optical elements as they will be used further in this book. 2.2.1 The Jones matrix of a linear polarizer The Jones matrix corresponding to an ideal (nonabsorbing) linear polarizer in a coordinate system connected to its transmittance axis is 2p 1 0 ð2:11Þ T¼ exp i nd ; 0 0 k where n is its refractive index and d its thickness. We shall omit the common phase exp(i2pnd/k) from now on. In practice, linear polarizers very often do absorb light, even if light is polarized along the transmittance axis (dichroic polarizers, for example). Moreover, the light component polarized perpendicular to the transmittance axis sometimes is not totally absorbed. The Jones matrix of such a dichroic polarizer is 0 expða1 dÞ ; ð2:12Þ T¼ 0 expða2 dÞ where a1 ¼ 4pk1 =k;
a2 ¼ 4pk2 =k:
ð2:13Þ
Here k1 and k2 are the absorption coefficients for the light components polarized parallel and perpendicular, respectively, to the transmittance axis of the polarizer, and a1 and a2 are the corresponding extinction coefficients. The difference a1 a2 determines the dichroism of the polarizing element. 2.2.2 Jones matrices of transparent birefrigent optical elements (retardation plates) The Jones matrix of a transparent birefringent material in a coordinate system connected to its optical axis is 0 expði’1 Þ ; ð2:14Þ T¼ 0 expði’2 Þ where
’1 ¼ 2pn1 d=k;
’2 ¼ 2pn2 d=k;
ð2:15Þ
and n1 and n2 are the refractive indices for the two eigenmodes propagating in the material. Equation (2.15) can be also written as (omitting the common phase)
2.2 The Jones-matrix formalism
0 T¼ 0
0 ; expði DUÞ
17
ð2:16Þ
where DU ¼ ’2 ’1 ¼ 2p Dn d=k; Dn ¼ n2 n1 is the birefringence of the material. Quarter-wave plates In the case DU ¼ p/2, we have
1 T¼ 0
0 : i
ð2:17Þ
Since a phase difference of p/2 corresponds to one quarter wavelength of light, this is the Jones matrix describing a quarter-wave plate (k/4 plate). Linearly polarized input light with polarization azimuth at 45 will emerge right-circularly polarized after this optical element: 1 1 1 0 1 0 cos 45 ¼ pffiffiffi E ¼ : ð2:18Þ Eout ¼ 0 i in 0 i sin 45 2 i If the input azimuth is 45 , the output polarization will be left circular. Half-wave plates If DU ¼ p, the Jones matrix is
1 T¼ 0
0 ; 1
ð2:19Þ
and the corresponding optical element is called a half-wave plate (k/2 plate). Linearly polarized light passing through the half-wave plate remains linearly polarized, but its azimuth is rotated as a function of the input azimuth a:
cos a
1 0 1 0 cos a
: E ¼ ¼
ð2:20Þ Eout ¼ 0 1 in 0 1 sin a sin a
That is, if the input wave is polarized at an angle a with respect to the abscissa Ox of the coordinate system connected with the optical axis of the half-wave plate, the output wave will be polarized along a. If a ¼ 45 , the output polarization will be perpendicular to the input polarization.
2.2.3 The Jones matrix of a material with dichroism and birefringence If the anisotropic material possesses both dichroism and birefringence, the Jones matrix describing light propagation through the material is
18
Propagation through polarizing systems
expða1 dÞ expði’1 Þ T¼ 0
0 : expða2 dÞ expði’2 Þ
ð2:21Þ
2.2.4 The Jones matrix of a material with circular anisotropy In materials with circular anisotropy the eigenmodes are circularly polarized and propagate with different velocities. As a result linearly polarized light propagating through such a material rotates its polarization azimuth. As mentioned earlier, these types of materials are also called optically active materials. If the angle of rotation corresponding to a unit path in the material is a, the Jones matrix of a transparent optically active element is cosðadÞ sinðadÞ T¼ : ð2:22Þ sinðadÞ cosðadÞ
2.2.5 Changing the coordinate system of Jones matrices In all the cases described until now the Jones matrices of the optical elements were written in a coordinate system connected to the optical axis of the corresponding element. However, very often it is necessary to write the same matrices in a system rotated with respect to the axis of the elements. Then the matrices (2.11), (2.12), (2.14), etc. must be transformed in accordance with the rotation angle a. The transformation is done using (see [6]) Tnew ¼ TðaÞTold TðaÞ;
ð2:23Þ
where
cos a R¼ sin a
sin a cos a
ð2:24Þ
is the rotation matrix. For example, the Jones matrix of a half-wave plate in a coordinate system rotated through an angle a with respect to its optical axis is cos ð2aÞ sin ð2aÞ T¼ : ð2:25Þ sin ð2aÞ cos ð2aÞ The corresponding matrix for a quarter-wave plate is ð1 iÞ sin a cos a cos2 a þ i sin2 a ; T¼ ð1 iÞ sin a cos a sin2 a þ i cos2 a
ð2:26Þ
2.2 The Jones-matrix formalism
and for an ideal linear polarizer cos2 a T¼ sin a cos a
sin a cos a : sin2 a
19
ð2:27Þ
2.2.6 Jones matrices in circular coordinates Sometimes it is much more convenient to write the Jones matrices in circular coordinates. This is more reasonable when the optical element or system has some chirality or circular symmetry, as in the case of optically active materials, cholesteric liquid crystals, etc. The transformation of a Jones matrix written in Cartesian coordinates into a matrix in circular coordinates is done according to 1 1 i 1 1 1 Tcar ¼ : ð2:28Þ Tcir ¼ 2 1 i 2 i i Let us, for example, write the matrix (2.22) of an optically active element of unit thickness in circular coordinates. We have 1 1 i cos a sin a 1 1 ; ð2:29Þ Tcir ¼ 2 1 i sin a cos a i i and we obtain Tcir ¼
expðiaÞ 0
0 : expðiaÞ
ð2:30Þ
Thus, the Jones matrix of an optically active material or element in circular coordinates is a simple diagonal matrix. It directly shows that the two circular eigenmodes propagate with different velocities. Tcir can also be written as 0 expði2pnl d=kÞ ; ð2:31Þ Tcir ¼ 0 expði2pnr d=kÞ where nl and nr are the refractive indices for the left- and right-circularly polarized eigenmodes. The difference nl nr is called the circular birefringence. From (2.30) and (2.31) it is found again that the optical rotation a is related to the circular birefringence by a ¼ pðnl nr Þ=k:
ð2:32Þ
20
Propagation through polarizing systems
2.2.7 The Jones matrix of a non-homogeneous anisotropic element In writing the matrices of the different anisotropic elements (2.11), (2.12), (2.14), etc. we have supposed that light propagates along the axis Oz, the front surface of the element is in the xy plane, and the elements are homogeneous, that is, their optical properties do not vary along Ox, Oy, or Oz. In the general case, however, the optical constants of the optical element, namely n, k, and their anisotropies, could be functions of x, y, and z. If n and k are functions of x and/or y, the formalism described above is still valid. The elements tij of the Jones matrix will also be functions of x and/or y. In this case there could be more than one output wave. A typical example is the Jones matrix of a diffraction grating whose elements are periodically modulated. As a result there will be a number of waves after the grating. As will be shown later in this book, their intensities and polarizations depend on the type of the periodic modulation of n and k, including their anisotropies. If the optical properties of the anisotropic element vary along z, light propagation through the element is much more complicated. Its description is outside the scope of this chapter.
2.3 The coherency-matrix formalism In all the considerations made in this chapter until now, we have dealt with totally polarized monochromatic or quasimonochromatic light waves and their propagation through nondepolarizing optical elements. When light is only partially polarized or unpolarized, it cannot be presented in terms of a Jones vector. There are two methods to represent partially polarized light – the coherency-matrix (J) method and the Stokes-vector (S) method. When a partially polarized light wave passes through a nondepolarizing optical element, it is still possible to use the Jones matrix T of the element in order to find the output wave. If the input wave is represented with its coherency matrix (see chapter 1) hEx Ex i hEx Ey i ð2:33Þ J¼ hEy Ex i hEy Ey i (Ei* is the complex conjugate of Ei), the output wave can be found using Jout ¼ TJin T† ;
ð2:34Þ
where T† is the Hermitian conjugate of the matrix T. As an example we will show that a partially polarized wave passing through a linear polarizer becomes totally polarized. If the transmittance axis of the
2.4 The Mueller-matrix formalism
21
polarizer is along Ox, we have
Jout
1 ¼ 0
0 0
The result is
hEx Ex i hEy Ex i
hEx Ey i hEy Ey i
Jout
hEx Ex i ¼ 0
1 0
0 : 0
0 : 0
ð2:35Þ
ð2:36Þ
This wave is polarized along Ox, and its intensity is Iout ¼ hExEx*i, that is it depends on the x component of the input wave. If the input wave is unpolarized, Iout ¼ 0.5Iin.
2.4 The Mueller-matrix formalism In the most general case, the light wave is partially polarized and it passes through a depolarizing optical element or system. In this case the only way to find the influence of the optical element on the light wave is to represent the input wave with its Stokes vector (see chapter 1) 2
3 S0 6 S1 7 7 Sin ¼ 6 4 S 2 5; S3
ð2:37Þ
and to use the 4 · 4 Mueller matrix [5, 6] of the optical element to describe its influence on the input wave. The output Stokes vector can be found using Sout ¼ MSin :
ð2:38Þ
The elements mij (i, j ¼ 1, 2, 3, 4) of the matrix M are real and depend on the optical properties of the anisotropic element or system being considered. If it is depolarizing, all the 16 elements, mij, are independent. In the case of a nondepolarizing system there are only seven independent elements and they can be calculated from the corresponding Jones matrix (see [4]). We shall omit here this calculation procedure, and shall give only the Mueller matrices of some frequently used nondepolarizing anisotropic elements.
22
Propagation through polarizing systems
2.4.1 The Mueller matrix of an ideal polarizer 2
1 61 Mp ¼ 6 40 0
1 1 0 0
0 0 0 0
3 0 07 7: 05 0
ð2:39Þ
2.4.2 The Mueller matrix of a half-wave plate 2
Mk=2
1 60 ¼6 40 0
0 1 0 0
0 0 1 0
3 0 0 7 7: 0 5 1
ð2:40Þ
2.4.3 The Mueller matrix of a quarter-wave plate 2
Mk=4
1 60 ¼6 40 0
0 1 0 0
0 0 0 1
3 0 07 7: 15 0
ð2:41Þ
2.4.4 The Mueller matrix of an optical rotator 2
1 0 0 6 0 cosð2aÞ sinð2aÞ MR ¼ 6 4 0 sinð2aÞ cosð2aÞ 0 0 0
3 0 07 7: 05 1
ð2:42Þ
Several applications of Mueller matrices are discussed in the books by Azzam and Bashara [5] and Collett [7]. Further examples of matrix methods in optics can be found in [8].
References
23
References 1. M. Born and E. Wolf. Principles of Optics: Electromagnetic Theory of Propagation, Interference and Diffraction of Light. 7th edition. Cambridge: Cambridge University Press (1999). 2. G. S. Landsberg. Optics. Moscow: Nauka (1976). 3. G. N. Ramachandran and S. Ramaseshan. Crystal Optics. Berlin: Springer-Verlag (1961). 4. R. C. Jones. New calculus for the treatment of optical systems. I. Description and discussion of the calculus. J. Opt. Soc. Am. 31 (1941) 488–93. 5. H. Mueller. The foundations of optics. J. Opt. Soc. Am. 38 (1948) 662. 6. R. M. A. Azzam and N. M. Bashara. Ellipsometry and Polarized Light. Amsterdam: North-Holland (1977). 7. E. Collett. Polarized Light – Fundamentals and Applications. New York: Marcel Dekker (1992). 8. A. Gerrard and J. M. Burch. Introduction to Matrix Methods in Optics. New York: Dover Publications (1973).
3 Theory of polarization holography
In this chapter, we shall examine first the principles of interference and holography and extend them to the concept of polarization holography. We shall study the specific character of the periodic anisotropic structures obtained by the holographic method, which we call polarization holograms. We shall show how their efficiency and their polarization properties depend on the choice of recording geometry and on the photoinduced anisotropy in the materials. Since the formation of linear anisotropy is more common and more pronounced in photoanisotropic materials known at the moment, we first consider polarization holography in materials with linear anisotropy only. Then we extend the consideration to materials with both linear and circular anisotropy. The appearance of relief gratings on the surface of polarization holograms is also taken into account. 3.1 Plane-wave interference and holography The holographic method was first proposed by Denis Gabor in 1948 [1] as a method for the reconstruction of wavefronts. Gabor proposed a two-stage process. The first stage is a two-dimensional photographic storage of the intensity distribution in the interference pattern of the signal wave (S) with a reference wave (R). At the second stage the reference wave illuminates the obtained photograph and reconstructs both the amplitude and the phase of the signal wavefront. The method was called “holography”, that is, “whole writing”. Later it was shown by Denisyuk [2] that, if three-dimensional (volume) materials are used to fix the interference field, the wavelength of the signal wave could also be restored. Interference is defined as the addition or superposition of two or more waves resulting in additions or subtractions of the resultant wave amplitudes, producing a spatial variation in the intensity in the resultant light. Holography is based on 24
3.1 Plane-wave interference
25
Fig. 3.1 An experimental set-up to record transmission holograms.
the interference of two waves, an object and a reference wave. In the complex exponential notation, equation (1.1) can be rewritten as ~ E1 ¼ E10 expðixtÞ expði’1 Þ:
ð3:1Þ
In an interference process, only the amplitude and the phase of the waves vary, and hence we can drop the term exp (ixt). If we consider the interference of two plane waves of amplitudes E1 and E2 and the same polarization, the intensity of the resulting wave is given by E2 Þ ð~ E1 þ ~ E2 Þ I ¼ ð~ E1 þ ~ ¼ jE1 j2 þjE2 j2 þ~ E1 ~ E2 ½expðið’2 ’1 Þ þ exp½ið’2 ’1 Þ ¼ I1 þ I2 þ 2~ E1 ~ E2 cosð’2 ’1 Þ:
ð3:2Þ
The cosine term in the above equation contains the interference part, and hence the phase information. A hologram is recorded as an interference pattern between a plane reference wave and an object wave reflected from or transmitted through an object, and thus contains all the information about the object in the “interference” term. This recording now serves as a diffractive element for the reconstruction of the object beam. A reconstruction of the original object beam is obtained in the form of diffraction orders of a conjugate reference beam. A simplified set-up to record transmission holograms is shown in figure 3.1. Light from a laser is focused through a spatial filter (pin-hole) to remove spatial variations in the beam and collimated. The beam is split into an object beam and a reference beam by means of a beamsplitter. The object beam falls on the object of interest and the scattered light from the object falls on a recording medium. The object can be a transparency or a three-dimensional object. The other beam from the beamsplitter serves as the reference beam. The interference pattern of these two beams is recorded in the recording medium, which in many cases is highresolution photographic film.
26
Theory of polarization holography
Fig. 3.2 Reconstruction of the hologram.
For a reconstruction of the object beam (figure 3.2), the photographic film is developed and fixed, and a conjugate of the reference beam is sent through the plate. Both a real and a virtual image of the object are now obtained as the þ1 and 1 diffraction orders of the reference beam. If the hologram is an “absorption” hologram, the photographic plate absorbs part of the incident light. This type of hologram has been shown to have a maximum diffraction efficiency of 6.25% [3]. This efficiency can be improved to 33.9%, by converting the “absorption” hologram into a “phase” hologram, by bleaching the photographic plate. In this case, the absorption variations are converted to refractive-index variations, and no light is absorbed in the plate itself. In addition, by employing thick holographic media, volume holograms based on Bragg diffraction can be recorded, resulting in a 100% diffraction efficiency. 3.2 Interference of polarized light An interesting question concerns the case of the object and reference beams having different polarizations – in particular, orthogonal polarizations. Fresnel and Arago put forward a set of laws of interference of polarized light. These are the following. 1. Two linearly polarized waves in the same plane from the same coherent source can interfere; two waves that are orthogonally polarized cannot interfere. 2. Two waves that are derived from the same source and are orthogonally polarized can interfere if their polarizations are brought into the same plane.
When a linearly polarized light wave passes through a birefringent medium, the wave can be resolved into an ordinary and an extraordinary linearly polarized wave passing through the medium with refractive indices no and ne. These waves are orthogonally polarized. If this emergent beam is passed through an analyzer, the directions of polarization can be brought into the same plane, and interference can take place. If the thickness of the medium is d, then a phase difference
3.3 Introduction to polarization holography
27
2pd(no ne)/k is introduced between the two beams. If the thickness of the medium is such that this phase difference is equal to p, 3p, 5p, . . . destructive interference between the two beams takes place. For all other phase differences, the resultant of the two waves will emerge. Thus, for interference to take place, the vibrations of the two waves must be in the same plane. The interference takes place after the analyzer (see [10] in chapter 1). In the Poincare´-sphere representation, if the polarizations of the two beams are represented by the end-points of a diameter of the sphere, no interference between the two beams can occur ([9] in chapter 1). Practical applications of the interference of polarized light are narrow-band-pass filters such as the Lyot filter and the Solc filter [4]. It must be remembered that the rules discussed in this section apply only to collinear beams. 3.3 Introduction to polarization holography The method of “interference holography” is in a way incomplete, insofar as it does not allow the reconstruction of an important characteristic of the subject wave – its polarization. The intensity modulation of the interference field is produced by the reference wave and the component of the signal wave parallel to it. The information about the orthogonal component is not fixed in the hologram, and is lost. A solution to this problem was found by Sh. D. Kakichashvilli [5–7]. He proposed to make use of the fact that “interference” has vectorial character. When the two interfering waves are not with the same polarization, the orthogonal component of S modulates the polarization in the interference pattern. Just like the intensity modulation, this polarization modulation is a function of the phase difference between the two waves. (As discussed before, interference is generally regarded as the constructive reinforcement in intensity when two waves arrive in phase, whereas one speaks of destructive reduction when they are out of phase; however, we shall use the term “interference” to refer to the general overlapping of two waves, even when there is no intensity modulation.) As mentioned at the end of section 3.2, the interference laws of Fresnel and Arago apply to the case of collinear beams. For non-collinear beams, the interference field is spatially modulated in the plane perpendicular to the bisectrix of the two beams. In the general case both the amplitude and the polarization of the resultant field are modulated. Here we give some examples of pure polarization modulation, in which the light intensity in the interference area is constant and only polarization is modulated (figures 3.3–3.7). It should be noted that the polarization patterns shown in these figures are correct only in the paraxial approximation, for small angles of incidence of the
28
Theory of polarization holography E1 E2
E = E1 + E2 p 2d = 0 4
3p 4
p 2
p
5p 4
6p 4
7p 2p 4
Fig. 3.3 The interference pattern of two waves E1 and E2 with orthogonal linear polarization and equal intensities. The resultant light-field intensity is constant and only the polarization is modulated according to the phase difference 2d between the two waves. At the location d ¼ 0 it is linear at 45 with respect to the polarization directions of the recording waves. Then it changes to elliptical with different ellipticity, depending on the values of 2d. For 2d ¼ p/2 it is circular, then the ellipticity decreases, etc.
E1 E2 E = E1 + E2 2d = 0
p 2
p 4
3p 4
p
5p 6p 4 4
7p 2p 4
Fig. 3.4 The interference pattern of two waves with orthogonal linear polarization and different intensities. Again, the resultant intensity is constant and there is only polarization modulation.
E1
E2
E = E1 + E2 2d = 0
p 4
p 2
3p 4
p
5p 6p 4 4
7p 2p 4
Fig. 3.5 The interference pattern of two waves with orthogonal circular polarization and equal intensities. The resultant field has constant intensity and linear polarization. The polarization direction varies periodically according to the phase difference 2d.
3.3 Introduction to polarization holography E1
29
E2
E = E1 + E2 2d = 0 p 4
p 2
3p 4
p
5p 6p 4 4
7p 4
2p
Fig. 3.6 The interference pattern of two waves with orthogonal circular polarization and different intensities. The light field has elliptic polarization with ellipticity depending on the ratio of intensities. The direction of the major axis of the polarization ellipse is spatially varying according to 2d. The resultant intensity is constant.
E1 E2
E = E1 + E2
2d = 0
p 4
p 2
3p 4
p
5p 4
6p 4
7p 4
2p
Fig. 3.7 The interference pattern of two waves with orthogonal elliptic polarization and equal intensities. The resulting intensity is constant again. The ellipticity and the polarization azimuth are modulated in accordance with 2d.
two waves on the surface where the interference is observed (usually the plane normal to the bisectrix of the two beams). Rigorous analysis reveals that the polarization ellipses of the modulated light field are not obligatorily located in this plane and the observed pattern is produced by their projections. For large angles of incidence the interference patterns are not so symmetrical. This has been discussed by Eichler et al. [8] and Viswanathan et al. [9]. It is obvious that the interference light fields shown in figures 3.3–3.7 could not be fixed in a conventional light-sensitive material. Conventional recording materials are sensitive only to light intensity. Exposed to such an interference pattern they would be uniformly darkened or bleached and there would be no diffraction from them at the reconstruction stage. In order to make use of the polarization modulation it is necessary to use a recording material that has a different response when exposed to light with different polarizations and can record the information about the polarization. Such materials are called
30
Theory of polarization holography
photoanisotropic materials. When exposed to polarized light they become optically anisotropic and their anisotropy is in accordance with the type and the direction of light polarization. Photoinduced anisotropy was first observed by F. Weigert in 1919 [10]. Weigert exposed to linearly polarized red light a previously darkened silverhalide emulsion. The second exposure bleached the plate and the bleaching was anisotropic – stronger for the light polarized parallel to the actinic red light polarization, and weaker for the orthogonal polarization. Similar photoinduced anisotropic changes in the absorption coefficient (linear dichroism) have been observed since then in many other materials, and in most of them they are accompanied by anisotropic changes in the refractive index (linear birefringence). The appearance of circular anisotropy (circular dichroism and circular birefringence) after illumination with circularly polarized light has also been observed. Many of the known photoanisotropic media have been used in experiments in polarization holography, for example AgCl emulsions, alkali-halide crystals with anisotropic color centers, some chalcogenide materials, and a great number of organic dyes incorporated in solid matrices. In all these materials the polarization modulation in the interference pattern can be encoded as periodic modulation of the induced anisotropy in the optical constants. The photoprocesses taking place in them and resulting in the anisotropic changes are discussed later in this book, in chapters 4 and 5. Special attention is paid to azobenzene-containing polymers (chapter 4) because they are the most efficient and the most studied photoanisotropic material at the moment. 3.4 Poincare´ representation of resulting polarization states Huang and Wagner [11] have discussed the resulting polarization states when two polarized beams of light of the same wavelength overlap, on the basis of the Poincare´ sphere discussed in chapter 1. The two points representing the two initial states of polarization are first localized on the surface of the sphere. They are then connected by an axis about which the Poincare´ sphere has to be rotated as the relative phase between the beams changes. A plane perpendicular to this axis intersects the sphere, making a circle. The resulting states of polarization lie on this circle (figure 3.8). Let us assume that one of the beams is vertically polarized, and the other horizontally polarized, and that they have equal intensity (figure 3.8(a)). In this case, the axis connecting H–V states is a line passing through the center of the sphere, and the circle perpendicular to this axis passes through 45 linearly polarized states, as well as through the north and south poles representing all the resulting
3.4 Poincare´ representation (a)
31
(b)
V
V
H H
(c)
V
H
Fig. 3.8 Poincare´ representation of the resultant polarization states when beams of different polarizations overlap: (a) Orthogonally circularly polarized beams and (b) orthogonally linearly polarized beams (horizontal–vertical) of equal intensity.
polarization states. If the beams are right- and left-circularly polarized, then the resulting polarization states lie on the equator, representing linearly polarized states that vary only in azimuth (figure 3.8(b)). If the intensities of the two interfering beams are different, the ratio of the intensities determines the position of the plane (figure 3.8(c)). The plane is closer to the stronger beam than to the weaker beam [11].
32
Theory of polarization holography
E u
Fig. 3.9 The linear oscillators are randomly distributed; they are oriented at different angles with respect to the light polarization vector E.
3.5 Polarization holography in materials with only linear photoanisotropy Let us now study holographic storage in photoanisotropic media with linear photoanisotropy. We shall assume for simplicity that light absorption in them is due to molecules or centers that are linear oscillators. We shall also assume that before the holographic exposure these linear oscillators are randomly distributed in all directions, so that the material is macroscopically isotropic (figure 3.9). On irradiation with polarized light, the optical constants of the material, namely the refractive index n and/or the extinction coefficient a, are modified. Polarized light absorption for each oscillator depends on its spatial orientation with respect to the direction of the electric vector E of the illuminating light. It is proportional to cos2 h, where h is the angle between E and the oscillator direction (figure 3.9). Then, linearly polarized light will be absorbed mostly by oscillators oriented in directions close to the polarization direction. The photoinduced changes for light polarized along E and perpendicular to it will be different. This means that n and a will become anisotropic. At this juncture, it may be appropriate to mention again the concept of birefringence and anisotropy. In uniaxial crystals, if a linearly polarized wave is polarized perpendicular to the optical axis, it will experience a refractive index no (ordinary refractive index), whereas when the polarization is parallel to the optical axis, the refractive index experienced is called the extraordinary refractive index, ne. The difference between the extraordinary refractive index and the
3.5 Only linear photoanisotropy
33
ordinary refractive index is called the birefringence of the medium. If ne < no the material possesses negative birefringence, whereas if ne > no the medium is said to possess positive birefringence. The anisotropic phase retardation or anisotropic phase after the crystal DU is defined to be DU ¼ 2pdðno ne Þ=k:
ð3:3aÞ
The sign of the anisotropic phase DU depends on the magnitudes of ne and no. Similarly, in the case of photoinduced anisotropy, we can define a refractive index nk for light polarized parallel to the polarization of the incident linearly polarized light, which induces an optical axis, and a refractive index n? for light with orthogonal polarization. The birefringence is nk n?. We define the photoinduced anisotropic phase in this case by DU ¼ 2pdðnjj n? Þ=k:
ð3:3bÞ
We shall first discuss only materials with phase modulation, i.e., with only linear photobirefringence and no linear dichroism. In this case, the refractive index n of the material changes as a result of the illumination. For the refractive index after the exposure we can write n ¼ n0 þ n 1 ;
Dn n1 ¼
jj 0
0
; Dn?
ð3:4Þ
where n0 is the refractive index before the exposure and Dnk and Dn? are the induced changes corresponding to the directions parallel and perpendicular to light polarization; n1 can also be written in the form
n þ Dn=2
0
; n1 ¼
ð3:5Þ 0 n Dn=2
with n ¼ ðDnjj þ Dn? Þ=2;
Dn ¼ njj n? :
ð3:6Þ
Here Dn is the photoinduced birefringence in the material. It is usual to assume that the photoinduced changes in n, Dnk, and Dn? are proportional to the light intensity I ¼ ~ E ~ E*: Dnjj ¼ kjj I; Dn? ¼ k? I;
ð3:7Þ
34
Theory of polarization holography y
a b
c x
Fig. 3.10 The polarization ellipse is determined by its axes a and b and its azimuth w.
where kk and k? are coefficients of the photoresponse of the materials for the parallel and the orthogonal directions. Dnk and Dn? can be positive or negative, depending on the material and the photoprocess taking place in it. The important point is that they are different. In the general case light is elliptically polarized; the polarization ellipse is determined by its major (a) and minor (b) axes and its azimuth w (figure 3.10). Elliptically polarized light will also induce anisotropic changes in the refractive index; they can again be described by (3.4), but for Dnk and Dn? we must write [12] Dnjj ¼ kjj a2 þ k? b2 ; Dn? ¼ k? a2 þ kjj b2 ;
ð3:8Þ
where the indices “k” and “?” are related to directions parallel and orthogonal to the major axis of the polarization ellipse a. We can now write the tensor (3.4) as " # kjj þk? kjj k? 2 2 2 2 ða þ b Þ þ ða b Þ 0 2 2 : n1 ¼ kjj þk? kjj k? 2 2 2 2 0 2 ða þ b Þ 2 ða b Þ ð3:9Þ We denote S ¼ ðkjj þ k? Þ=2;
ð3:10Þ
as the average value of the photoresponse coefficients; we shall call S the coefficient of the scalar response. By analogy,
3.5 Only linear photoanisotropy
L ¼ ðkjj k? Þ=2
35
ð3:11Þ
is the coefficient of linear anisotropy. Then we can write n ¼ ðDnjj þ Dn? Þ=2 ¼ Sða2 þ b2 Þ;
ð3:12Þ
where n is the scalar change in the refractive index. This is proportional to the light intensity a2 þ b2. Also Dn ¼ 2Lða2 b2 Þ
ð3:13Þ
is the linear anisotropy in the refractive index (the linear birefringence) induced by the elliptically polarized light. Then, in a coordinate system x0 y0 related to the axes a and b of the polarization ellipse, we may write the tensor n1 as Sða2 þ b2 Þ þ Lða2 b2 Þ 0 : ð3:14Þ n1 ¼ 0 Sða2 þ b2 Þ Lða2 b2 Þ To obtain n1 in the system (x, y) we have to rotate (3.14) by an angle w: n1xy ¼ RðwÞn1x0 y0 RðwÞ;
ð3:15Þ
where R(w) is the rotation matrix
cos w RðwÞ ¼ sin w This gives Sða2 þ b2 Þ þ Lða2 b2 Þ cosð2wÞ n1xy ¼ Lða2 b2 Þ sinð2wÞ
sin w : cos w
ð3:16Þ
Lða2 b2 Þ sinð2wÞ : Sða2 þ b2 Þ Lða2 b2 Þ cosð2wÞ ð3:17Þ
For polarized monochromatic waves used for the holographic recording we have S0 ¼ ða2 þ b2 Þ; S1 ¼ ða2 b2 Þ cosð2wÞ;
ð3:18Þ
S2 ¼ ða b Þ sinð2wÞ; 2
2
where S0, S1, and S2 are the first, second and third Stokes parameters of the light. On substituting (3.18) into (3.17) we obtain for the tensor of the photoinduced changes in n LS2 SS0 þ LS1 : ð3:19Þ n1 ¼ LS2 SS0 LS1
36
Theory of polarization holography
In the general case the optical extinction of the photoanisotropic material is also changed after illumination. If the exciting light is linearly polarized, the extinction coefficient a becomes anisotropic – linear dichroism is induced. By analogy, we can present the photoinduced anisotropy in a as a ¼ a0 þ ai ;
ð3:20Þ
where a0 is the extinction before the illumination, and ai is the photoinduced change in it. For ai we shall write
S e S0 þ Le S1
Le S2
; ai ¼
ð3:21Þ Le S2 S e S0 Le S1
where S e and Le are coefficients for the photoinduced changes in the extinction, namely the scalar coefficient and the coefficient of linear anisotropy. During the holographic storage the recording material is exposed to a spatially modulated light field resulting from the interference of the signal wave with a reference wave. In the general case this interference field has both intensity and polarization modulation. This means that S0, S1, and S2 are functions of the coordinates in the (x, y) plane: S0 ¼ S0 ðx; yÞ;
S1 ¼ S1 ðx; yÞ;
S2 ¼ S2 ðx; yÞ:
ð3:22Þ
Therefore, the components of the tensors n1 and a1 are also functions of the coordinates: n1 ¼ n1(x, y) and a1 ¼ a1(x, y). A suitable recording medium can record this spatially modulated anisotropy, and a polarization hologram is obtained. In order to study the properties of polarization holograms in photoanisotropic materials we must take into account that the optical constants of the recording material are tensors and the components of these tensors are periodically modulated.
3.6 Transmission polarization holograms We shall first study transmission polarization holograms in materials with linear photoanisotropy. For a greater part of this discussion (sections 3.6.1–3.6.5) we use the Jones-matrix method (see chapter 2) to find the properties of these holograms. In sections 3.6.1–3.6.4 it is assumed that only the refractive index of the recording material is modulated and we have lossless phase polarization holograms. Mixed (amplitude–phase) holograms are considered in section 3.6.5. Finally, in section 3.6.6, we discuss volume polarization holograms. The Jones matrix describing the polarization hologram with periodic modulation of the anisotropy of the refractive index can be obtained using
3.6 Transmission polarization holograms
37
y x R
S
–u u
Fig. 3.11 The scheme of the holographic recording with two plane waves with orthogonal linear polarizations.
T ¼ exp½i2pðn0 þ n1 Þd=k:
ð3:23Þ
Here d is the hologram thickness, k is the wavelength of the wave incident on the hologram, and n1 is defined by (3.19). The components of the matrix T depend on the type of interference field used during the recording of the anisotropic hologram. We will now calculate them in several simple cases. 3.6.1 Case 1: R and S are plane waves with orthogonal linear polarization We shall now treat the case in which the writing waves have orthogonal linear polarization [13]. We shall consider a symmetrical optical scheme. The two recording waves are incident to the recording medium at angles h and h. The wave R, incident at –h, has vertical polarization, and the wave S, incident at h, has horizontal polarization. We shall use for convenience a coordinate system (x, y) rotated 45 with respect to the plane of incidence (the horizontal). Let R and S have equal intensity: IR ¼ IS ¼ 1/2. Using the Jones-vector formalism for the waves R and S we can write 1 1 1 1 expðidÞ; S¼ expðidÞ: ð3:24Þ R¼ 2 1 2 1 Here d ¼ 2p sin h n/k, where n is the distance along the horizontal axis and k is the wavelength.
38
Theory of polarization holography R
(a)
S
E=R+S 2d = 0
(b)
p 4
p 2
3p 4
p
5p 4
6p 4
7p 2p 4
S R
E=R+S 2d = 0
p 4
p 2
3p 4
p
5p 4
6p 4
7p 2p 4
Fig. 3.12 The polarization patterns in the cases when (a) R has vertical and S has horizontal polarization, and (b) R has horizontal and S has vertical polarization.
In this case the interference field is 1 expðidÞ þ expðidÞ cos d E ¼RþS ¼ ¼ : i sin d 2 expðidÞ expðidÞ
ð3:25Þ
The wave described by the Jones vector (3.25) is in general elliptically polarized. In the special cases d ¼ 0, p/2, p, 3p/2, etc. it is linearly polarized. For d ¼ 0 we have cos 0 ¼ 1, sin 0 ¼ 0, so that the wave is linearly polarized along the axis Ox. For d ¼ p/2 we have cos(p/2) ¼ 0, sin(p/2) ¼ 1, and the wave is linearly polarized along the axis Oy. For d ¼ p/4, we have pffiffiffi 2 1 ; ð3:26Þ E¼ 2 i and the polarization is left circular. It is also left circular for d ¼ 5p/4. For d ¼ 3p/4, or d ¼ 7p/4, the polarization is right circular. The polarization modulation of the interference field along the axis n is given in figure 3.12(a). Figure 3.12(b) shows the polarization modulation in the case when the wave R has horizontal and the wave S has vertical polarization. From (3.25) we obtain for the first three Stokes parameters S0 ¼ 1; S1 ¼ cosð2dÞ; S2 ¼ 0:
ð3:27Þ
3.6 Transmission polarization holograms
39
This light field has constant intensity. Note that this is the only recording geometry for “pure polarization” holograms; there is no intensity modulation, irrespective of the value of the recording angle, h. If we illuminate a material with linear photobirefringence with this interference light field we will induce periodically modulated birefringence, that is, we will obtain a polarization-holographic grating. According to (3.23), (3.19), and (3.27), the Jones matrix describing the transmittance of this grating in the coordinate system (x, y) is
exp½i D’ cosð2dÞ 0 ; Tvh ¼ expði’0 Þ expði’s Þ 0 exp½i D’ cosð2dÞ
ð3:28Þ
where ’0 ¼ 2pn0 d=k; ’s ¼ 2pnd=k; and D’ ¼ p Dn d: Note that D’ ¼ DU=2, where DU is the total anisotropic phase difference between the x and y components according to equation (3.3b). The matrix Tvh can be presented as a series of matrices: Tvh ¼ T0 þ T1 þ T2 þ
ð3:29Þ
where, omitting the phase constant, T0 ¼ J0 ðD’Þ;
i2J1 ðD’Þ cosð2dÞ T1 ¼ 0
0 ; i2J1 ðD’Þ cosð2dÞ
0 2J2 ðD’Þ cosð4dÞ : T2 ¼ 0 2J2 ðD’Þ cosð4dÞ
ð3:30Þ
ð3:31Þ
ð3:32Þ
In the above the complex exponentials have been expanded in terms of Bessel functions. Ji(D’) are the ith-order Bessel functions of the first kind. The matrix T0 is not spatially modulated, it corresponds to the undiffracted, 0th-order wave. T1, T2, etc. determine the diffraction in the 1, 2, etc. orders. To study the properties of the waves diffracted in the different orders, we must first obtain their Jones vectors by multiplying the Jones vector of the reconstructing wave R0 by the matrix Tvh. Let the reconstructing wave have intensity I ¼ 1, being linearly polarized at an angle a with respect to the axis Ox and propagating along the propagation direction of the reference wave used during the recording:
40
Theory of polarization holography
cos a R¼ expðidÞ: sin a
ð3:33Þ
The 0th-order wave will have the same linear polarization as the read-out wave, and its amplitude is given by (J0 (D’))2. For the waves of þ1 and 1 orders we obtain cos a expðidÞ; Eþ1 ¼ iJ1 ðD’Þ sin a ð3:34Þ cos a E1 ¼ iJ1 ðD’Þ expði3d Þ: sin a The intensities of these waves are Iþ1 ¼ I1 ¼ (J1(D’))2. They are linearly polarized along a, that is, their polarization is rotated by an angle 2a with respect to the reconstructing wave. This means that, for the 1 diffraction orders, this type of grating acts as a k/2 plate with axes oriented at 45 with respect to the polarization of the waves used at the recording. This property is valid for the waves diffracted in all the odd orders. If R0 has the polarization of the reference wave R, (a ¼ 90 ), then the 1, 3, . . . waves have orthogonal polarization, and they replicate the polarization of the signal wave S used during the recording. The waves diffracted at the 2 orders are
Eþ2 E2
cos a ¼ J2 ðD’Þ expði3dÞ; sin a cos a ¼ J2 ðD’Þ expði5dÞ: sin a
ð3:35Þ
They (and all the even-order waves) have the polarization of the reconstructing wave. Their amplitudes are determined by the second-order Bessel function J2(D’). If the read-out wave is left-circularly polarized, 1 R¼ expðidÞ; i for the þ1 order and 1 order diffracted waves we obtain i expðidÞ; Eþ1 ¼ J1 ðD’Þ 1 i E1 ¼ J1 ðD’Þ expði3dÞ; 1 which represent right-circularly polarized waves.
ð3:36Þ
3.6 Transmission polarization holograms
41
The waves diffracted at the 2 orders are 1 expði3dÞ; Eþ2 ¼ J2 ðD’Þ i 1 E2 ¼ J2 ðD’Þ expði5dÞ: i
ð3:37Þ
Again, these (and all the even-order waves) have the polarization of the reconstructing wave. Their amplitudes are once again determined by the second-order Bessel function J2(D’). 3.6.2 Case 2: R and S are plane waves with orthogonal circular polarization We shall now treat the case of orthogonally circularly polarized beams for recording the hologram [13]. We shall consider again a symmetrical recording geometry (figure 3.13), taking R with left-circular polarization and S with rightcircular polarization. The angle h is chosen to be small, so that cos h 1 and sin h 0. We have 1 1 1 1 expðidÞ; S¼ expðidÞ; ð3:38Þ R¼ 2 i 2 i and for the interference field we obtain cos d E¼ : sin d
ð3:39Þ
y
x R
⫺ S
Fig. 3.13 The scheme of the recording geometry. The wave R has left-circular polarization and S has right-circular polarization.
42
Theory of polarization holography (a)
R
S
E=R+S 2d = 0 p 4
(b)
R
p 2
3p 4
p
5p 4
6p 4
7p 2p 4
p 2
3p 4
p
5p 4
6p 4
7p 4
S
E=R+S 2d = 0
p 4
2p
Fig. 3.14 One period of the polarization pattern in the cases when (a) R has leftcircular and S has right-circular polarization, and (b) R has right-circular and S has left-circular polarization.
As the ratio of the components Ex and Ey of the vector E is a real number, the polarization of the resultant field is linear. For d ¼ 0 we have Ex ¼ 1, Ey ¼ 0, and the resultant polarization is along the axis Ox. For d ¼ p/4, it is along 45 , for d ¼ p/2 it is along the axis Oy, etc. Figure 3.14(a) shows one period of the polarization pattern in this case. Figure 3.14(b) shows the polarization pattern in the case when R has right-circular polarization and S has left-circular polarization. From (3.39), we obtain for the first three Stokes parameters S0 ¼ 1; S1 ¼ cosð2dÞ;
ð3:40Þ
S2 ¼ sinð2dÞ: According to (3.4) and (3.5), at the location d ¼ 0 we have n þ Dn=2 0 ; n ¼ n0 þ 0 n Dn=2
ð3:41Þ
and for the Jones matrix describing the transmittance at d ¼ 0 we obtain expði D’Þ 0 : ð3:42Þ Td¼0 ¼ expði’0 Þ expði’s Þ 0 expði D’Þ
3.6 Transmission polarization holograms
43
The Jones matrix describing the transmittance of the entire grating is obtained by rotating (3.42) through an angle d ¼ d(x). This yields Tlr ¼ RðdÞTd¼0 RðdÞ;
cosðD’Þ þ i sinðD’Þ cosð2dÞ i sinðD’Þ sinð2dÞ : Tlr ¼ const: i sinðD’Þ sinð2dÞ cosðD’Þ i sinðD’Þ cosð2dÞ ð3:43Þ It is readily seen that the matrix Tlr can be written as a sum of three matrices: Tlr ¼ T0 þ Tþ1 þ T1 ;
ð3:44Þ
where, omitting again the phase constant, cosðD’Þ 0 ; T0 ¼ 0 cosðD’Þ
Tþ1 ¼ and T1
i sinðD’Þ 1 expði2dÞ i 2
ð3:45Þ i ; 1
i sinðD’Þ 1 i ¼ expði2dÞ : i 1 2
ð3:46Þ
ð3:47Þ
Therefore, there are only three waves after the grating – an undiffracted wave (0th order) and two diffracted waves – in the þ1 and 1 orders. T0 determines the 0th-order wave and T1 determine the two diffracted waves. To obtain the intensities and the polarization of the three waves we have to multiply the Jones vector of the reconstructing wave R0 by the matrix Tlr. Let us first take R0 to be linearly polarized at an angle a with respect to the axis Ox: cos a : ð3:48Þ R0 ¼ sin a The field after the grating is given by S ¼ Tlr R ¼ ðT0 þ Tþ1 þ T1 ÞR ¼ S0 þ Sþ1 þ S1 :
ð3:49Þ
The 0th-order wave is
cos a : S0 ¼ cosðD’Þ sin a
ð3:50Þ
44
Theory of polarization holography
It emerges with the same polarization and its intensity is proportional to cos2(Du). The waves of 1 orders are sinðD’Þ cos a þ i sin a Sþ1 ¼ i ; ð3:51Þ iðcos a þ i sin aÞ 2
S1
sinðD’Þ cos a i sin a ¼ i : iðcos a i sin aÞ 2
ð3:52Þ
It follows from (3.51) and (3.52) that, independently of the polarization direction a of R0 , the two diffracted waves are circularly polarized; the þ1 order wave has right-circular polarization just like the signal wave used at the recording and the 1 wave has left-circular polarization, like the reference wave. These two diffracted waves have equal intensity, Iþ1 ¼ I1 ¼
sin2 ðD’Þ : 2
ð3:53Þ
For D’ ¼ p=2 the diffraction efficiency in both the 1 orders could be 50%. Let us now consider the case of reconstructing wave R0 with elliptic polarization, a 0 ; ð3:54Þ R ¼ ib where a and b are the major and minor axes of the polarization ellipse, a2 þ b2 ¼ 1. The 0th-order wave retains the polarization of R0 ; its intensity is again I0 ¼ cos2 (D’). The two diffracted waves are i sinðD’Þ aþb ; ð3:55Þ Sþ1 ¼ þiða þ bÞ 2
S1
i sinðD’Þ
a b
¼
iða bÞ : 2
ð3:56Þ
The waves Sþ1 and S1 again have circular polarization, right and left, respectively, regardless of the ellipticity e ¼ b/a of the reconstructing wave R0 . Their intensities are I þ1 ¼
sin2 ðD’Þ 2 ða þ b2 þ 2abÞ; 2
ð3:57Þ
3.6 Transmission polarization holograms
I 1 ¼
sin2 ðD’Þ 2 ða þ b2 2abÞ: 2
45
ð3:58Þ
It can be seen that, if b ¼ a, and R0 is left-circularly polarized, there will be only one diffracted wave, in the þ1 order. Its intensity will be Iþ1 ¼ sin2(D’). This means that the diffraction efficiency in the þ1 order (gþ1) could reach 100% for D’ ¼ p/2. At the same time the 1 order wave vanishes. By analogy, if R0 has right-circular polarization, there will be no diffracted wave in the þ1 order and all the diffracted light will go to the 1 order; g1 can again reach 100% for D’ ¼ p/2. Thus, we have shown that a polarization grating recorded with two waves with orthogonal circular polarization has at least two very important properties. The first of them is the presence of only two orders of diffraction and the possibility of obtaining 100% diffraction efficiency through a proper choice of the polarization of the reconstructing wave. The second is the separation of the left and right components of the diffracted light. For the different values of the ellipticity e ¼ b/a there is an energy transfer between the diffracted waves of þ1 and 1 orders depending on the value of e. It should be noted that a2 þ b2 ¼ S0 is the first Stokes parameter of light (the intensity) and 2ab ¼ S3 is the fourth Stokes parameter. Then, from (3.57) and (3.58), we obtain I þ1 ¼ const: ðS0 þ S3 Þ
and
I 1 ¼ const: ðS0 S3 Þ:
We can write S3 Iþ1 I1 ¼ : S0 Iþ1 þ I1
ð3:59Þ
Hence, this type of polarization-holographic grating facilitates measurement of the normalized fourth parameter of light S3 and can be of great use in polarimetry (see section 6.1). The properties of polarization holograms described in sections 3.6.1 and 3.6.2 are summarized in table 3.1. 3.6.3 Case 3: R and S have parallel linear polarization We shall assume the polarization to be along the horizontal axis Ox. Since in this case there is only intensity modulation and no modulation of light polarization, the obtained hologram is usually referred to as a “scalar” one. However, if the recording material is photoanisotropic, the gratings inscribed with this geometry are also anisotropic. With
46
Theory of polarization holography
Table 3.1. Diffraction efficiency and polarization of the þ1 and 1 order diffracted waves in the two considered cases of polarization holographic gratings
H–V writing RCP–LCP writing
Linear reading (a)
Circular reading (LCP)
Efficiency
Polarization
Efficiency
Polarization
Equal (33.9%) Equal (50%)
Linear (a) RCP, LCP
Equal (33.9%) 100%, 0%
RCP RCP
H–V, horizontal–vertical; LCP, left-circularly polarized; RCP, right-circularly polarized.
pffiffiffi 2 1 R¼ expðidÞ; 2 0
pffiffiffi 2 1 S¼ expðidÞ 2 0
ð3:60Þ
we have for the interference field pffiffiffi 2 cos d E¼ 0
ð3:61Þ
and the first three Stokes parameters are S0 ¼ 1 þ cosð2dÞ;
S1 ¼ 1 þ cosð2dÞ;
S2 ¼ 0:
ð3:62Þ
Then, from (3.23), (3.19), and (3.62) for the Jones matrix of the resulting grating we obtain expfið2p=kÞðS þ LÞ½1 þ cosð2dÞg 0 T¼ ; 0 expfið2p=kÞðS LÞ½1 þ cosð2dÞg or
expfi D’k ½1 þ cosð2dÞg T¼ 0
0 ; expfi D’? ½1 þ cosð2dÞg
ð3:63Þ
where D’k ¼ 2p Dnk d=k and D’? ¼ 2p Dn? d=k. Since the diagonal elements of the matrix T are different, the diffraction efficiency will be dependent on the polarization of the reconstructing light. To a first approximation, for small values of the phase modulation (if J1 T can be written also as 0 0 exp½i D’jj cosð2dÞ expði D’jj Þ · : T¼ 0 expði D’? Þ 0 exp½i D’? cosð2dÞ ð3:64Þ (Du) Du), for the matrix determining the diffraction in the 1 orders we have
3.6 Transmission polarization holograms
T1
47
0 0 expði D’jj Þ D’jj cosð2dÞ ¼i · : ð3:65Þ 0 expði D’? Þ 0 D’? cosð2dÞ
Then, if the reconstructing wave is linearly polarized, cos a 0 ; R ¼ sin a the 1 order diffracted waves will be " D’ # jj cos a expði D’ Þ jj 2 S1 ¼ D’? 2 sin a expði D’? Þ
ð3:66Þ
ð3:67Þ
with intensities I1 ¼
D’jj 2
2
D’? cos a þ 2 2
2 sin2 a:
ð3:68Þ
It is seen from (3.67) that the diffracted waves will not retain the polarization of the reconstructing wave except in the cases a ¼ 0 and a ¼ 90 . Furthermore, the diffraction efficiency will depend on the azimuth a according to (3.68). Then, by measuring the diffraction efficiency for a ¼ 0 and a ¼ p/2 one can obtain the values of the photoinduced change in the refractive index of the recording material and also its anisotropy [14]. 3.6.4 General case: arbitrary polarization of the subject wave. Reconstruction of light polarization We have shown thus far that, if the holographic recording in photoanisotropic materials is done with two waves with orthogonal polarizations (linear or circular), then at the reconstructing stage the þ1 order diffracted wave will have the same polarization as that of the signal wave used during the recording. That is, in these cases light polarization is also recorded in the hologram and then reconstructed from it. In the case of reference R and signal S waves with orthogonal linear polarizations, a necessary condition for the reconstruction of the polarization is the use of a reference wave R0 identical in polarization to R. In the case of recording with R and S with orthogonal circular polarizations this is not obligatory; the polarization of the þ1 order diffracted wave has the polarization of S independently of the R0 polarization. We shall now consider the general case – the signal wave S has arbitrary polarization that can also be variable in the (x, y) plane. We shall try to find the conditions for the exact reconstruction of this arbitrary polarization [12].
48
Theory of polarization holography
We shall first consider the case of a linearly polarized reference wave R. Let us choose for convenience its polarization direction to be 45 with respect to the Ox axis, 1 R¼ expðidÞ: ð3:69Þ 1 The signal wave is S¼
Sx expðidÞ; Sy
ð3:70Þ
where the components Sx and Sy are complex and their ratio defines the polarization of S. The interference field is
Sx expðidÞ þ expðidÞ ; E¼ Sy expðidÞ þ expðidÞ
ð3:71Þ
and for the first three Stokes parameters of the interference field we obtain S0 ¼ const: þ 2ðSx þ Sy Þ cosð2dÞ; S1 ¼ const: þ 2ðSx Sy Þ cosð2dÞ;
ð3:72Þ
S2 ¼ const: þ 2ðSx þ Sy Þ cosð2dÞ: Then, from (3.19), (3.23), and (3.72) for the Jones matrix of the obtained hologram determining the diffraction in the þ1 order in the first approximation (J1(x) ¼ x), we obtain
Tþ1
SðSx þ Sy Þ þ LðSx Sy Þ ¼ LðSx þ Sy Þ
LðSx þ Sy Þ : SðSx þ Sy Þ LðSx Sy Þ
ð3:73Þ
Let us now choose for the reconstruction a wave R0 identical in polarization to the reference wave R, 1 0 R ¼ : ð3:74Þ 1 Then, for the Jones vector of the þ1 order diffracted wave, we have X ; Sþ1 ¼ Tþ1 R ¼ Y where the complex components X and Y are
ð3:75Þ
3.6 Transmission polarization holograms
49
n||
n0 before illumination n⊥ after illumination
Fig. 3.15 A schematic representation of the photoinduced changes in the refractive index according to (3.79): nk ¼ n0 þ Dnk; n? ¼ n0 þ Dn? ¼ n0 Dnk.
X ¼ ðS þ 2LÞSx þ SSy ; Y ¼ SSx þ ðS þ 2LÞSy :
ð3:76Þ
Now, we want the wave Sþ1 to have the same polarization as S, that is Y Sy ¼ : X Sx
ð3:77Þ
It is readily seen that this is satisfied only if S ¼ 0;
ð3:78Þ
that is, if the material has no scalar interaction. In this case, on illumination with linearly polarized light the average value of the refractive index does not change. Using the notations (3.4) and (3.5) we can write this necessary condition as n ¼ 0; Dnjj ¼ Dn? :
ð3:79Þ
A schematic representation of (3.79) is given in figure 3.15. From the point of view of the photoreaction resulting from the illumination this type of change can be expected in materials in which the absorbing centers are reoriented when exposed to linearly polarized light. These can be, for example, azobenzene-containing polymers. The photoinduced reaction in azobenzene polymers will be discussed in chapter 4. We shall consider now the case of a circularly polarized reference wave 1 R¼ expðidÞ: ð3:80Þ i
50
Theory of polarization holography
Using the same notation as in (3.70), for the interference field we obtain E¼
Sx expðidÞ þ expðidÞ : Sy expðidÞ i expðidÞ
ð3:81Þ
The corresponding modulation of the Stokes parameters is S0 ¼ const: þ 2Sx cosð2dÞ 2Sy sinð2dÞ; S1 ¼ const: þ 2Sx cosð2dÞ þ 2Sy sinð2dÞ;
ð3:82Þ
S2 ¼ const: 2Sx sinð2dÞ þ 2Sy cosð2dÞ: Using (3.19), (3.23), and (3.82) for the matrix Tþ1 determining the diffraction in the þ1 order, we obtain SðSx þ iSy Þ þ LðSx iSy Þ LðiSx þ Sy Þ : ð3:83Þ Tþ1 ¼ i LðiSx þ Sy Þ SðSx þ iSy Þ LðSx iSy Þ Then, if we use for the reconstruction a wave R0 identical to the reference wave (3.80), for the x and y components of the þ1 order wave we obtain X ¼ ðS þ 2LÞSx þ iðS 2LÞSy ; Y ¼ ðS þ 2LÞSy iðS 2LÞSx :
ð3:84Þ
To reconstruct the exact polarization of the subject wave S we must have again Y Sy ¼ : X Sx
ð3:85Þ
It is seen from (3.85) and (3.84) that the necessary condition in the case of a circularly polarized reference wave is S ¼ 2L:
ð3:86Þ
The schematic representation of the changes in the refractive index corresponding to (3.86) is given in figure 3.16 for the case of negative changes in n. For an exact polarization reconstruction Dnk and Dn? must have the same sign and satisfy the condition Dn? ¼
1 Dnjj : 3
ð3:87Þ
More detailed analysis shows [15] that the condition (3.86) is an approximation for lossless holograms only. In the case of volume polarization holograms in which light absorption must be taken into account at the recording stage the
3.6 Transmission polarization holograms
51
n0 before illumination
n⊥
n|| after illumination
Fig. 3.16 A schematic representation of the photoinduced anisotropic changes in the refractive index according to (3.86) and (3.87). nk ¼ n0 þ Dnk; n? ¼ n0 þ Dn? ¼ n0 þ Dnk/3.
relation between S and L is more complicated, since it also should include the extinction coefficient of the recording material. We shall now try to find a necessary condition for the reconstruction of the signal-wave polarization in the case of an elliptically polarized reference wave. We shall use the same technique. We shall write for the reference wave expðiDÞ R¼ expðidÞ; ð3:88Þ expðiDÞ where the phase difference 2D between the x and y components determines the ellipticity, and for the subject wave we will write again S ð3:89Þ S ¼ x expðidÞ: Sy Then, the interference field is expðiDÞ expðidÞ þ Sx expðidÞ ; E¼ expðiDÞ expðidÞ þ Sy expðidÞ
ð3:90Þ
and for the Stokes parameters S0, S1, and S2, we obtain S0 ¼ const: þ 2Sx cosð2d DÞ þ 2Sy cosð2d þ DÞ; S1 ¼ const: þ 2Sx cosð2d DÞ 2Sy cosð2d þ DÞ; S2 ¼ const: þ 2Sx cosð2d þ DÞ þ 2Sy cosð2d DÞ:
ð3:91Þ
The terms in S0, S1, and S2 contributing to the þ1 order diffraction are, respectively, S0 ðþ1Þ ¼ Sx expðiDÞ þ Sy expðiDÞ; S1 ðþ1Þ ¼ Sx expðiDÞ Sy expðiDÞ; S2 ðþ1Þ ¼ Sx expðiDÞ þ Sy expðiDÞ:
ð3:92Þ
52
Theory of polarization holography
Using (3.19), (3.23), and (3.92), we obtain for the Jones matrix determining the þ1 order diffraction T¼
ðS þ LÞSx expðiDÞ þ ðS LÞSy expðiDÞ LSx expðiDÞ þ LSy expðiDÞ
LSx expðiDÞ þ LSy expðiDÞ : ðS LÞSx expðiDÞ þ ðS þ LÞSy expðiDÞ ð3:93Þ
If we use at the reconstruction stage a wave identical to the wave (3.88) used as a reference wave during the recording and multiply it by the Jones matrix (3.93), we obtain for the components of the þ1 diffraction order wave X ¼ ðS þ 2LÞSx þ ½S expði2DÞ 2iL sinð2DÞSy ; Y ¼ ðS þ 2LÞSy þ ½S expði2DÞ þ 2iL sinð2DÞSx :
ð3:94Þ
The necessary condition for the reconstruction of the subject wave polarization in this case is Y ðS þ 2LÞSy þ ½expði2DÞ þ 2iL sinð2DÞSx Sy ¼ : ¼ ðS þ 2LÞSx þ ½S expði2DÞ 2iL sinð2DÞSy Sx X
ð3:95Þ
It is easy to see that for D ¼ 0 (linear polarization of the reference wave) the condition (3.95) becomes Y ðS þ 2LÞSy þ SSx ; ð3:96Þ ¼ X ðS þ 2LÞSx þ SSy which is satisfied if s ¼ 0, as has already been shown. Furthermore, if D ¼ p/4 (a circularly polarized reference wave) the condition is Y ðS þ 2LÞSy iðS 2LÞSx ; ¼ X ðS þ 2LÞSx þ iðS 2LÞSx
ð3:97Þ
which is fulfilled if S ¼ 2L as obtained earlier. In the general case, however, if D 6¼ 0, and D 6¼ p/4, it is not possible to find a relation between S and L assuring the exact reconstruction of all the possible polarization states of the subject wave. We will give here an example. Let us assume that the signal wave has the same elliptic polarization as the reference wave. Then, Sy ¼ expði2DÞ; ð3:98Þ Sx and we can rewrite the condition (3.97) in the form ðS þ 2LÞSy þ ½S expði2DÞ þ 2iL sinð2DÞSx ¼ expði2DÞ; ðS þ 2LÞSx þ ½S expði2DÞ 2iL sinð2DÞSy
ð3:99Þ
3.6 Transmission polarization holograms
53
or ðS þ 2LÞ expð2iDÞ þ S expð2iDÞ þ 2iL sinð2DÞ ¼ ðS þ 2LÞ expð2iDÞ þ S expð2iDÞ 2iL sinð2DÞ expð4iDÞ: ð3:100Þ If D 6¼ 0 this condition is satisfied only if L ¼ 0, that is, in the absence of anisotropic reaction of the material. In this case, however, it would not be possible to obtain a polarization hologram and the diffracted waves will always have the polarization of the reconstructing wave. It is concluded, then, that the polarization of the signal wave can be stored in materials with linear photoanisotropy and then reconstructed only if the reference wave has linear or circular polarization and the coefficients of the scalar reaction S and linear anisotropy L satisfy the conditions (3.78) or (3.86), respectively. 3.6.5 Mixed polarization gratings In our study until now we have assumed that the photoanisotropic material is lossless and that during the polarization-holographic recording only spatially modulated anisotropy in the refractive index is induced. Actually all the materials for polarization holography do absorb light in some region, and linearly polarized light induces anisotropy in their absorption, too. If the gratings obtained are not used only for wavelengths outside the absorption band of the recording material the holographic modulation of the absorption coefficient and its anisotropy (dichroism) should also be taken into account. The change in absorption and the refractive index are, of course, related through the Kramers–Kronig relation. In this section we shall consider, for completeness, polarization-holographic gratings in materials with both dichroism and birefringence [16]. We shall repeat the derivation of the Jones matrix of a holographic grating recorded with two plane waves with orthogonal circular polarization (figure 3.13). Let us first consider the photoinduced changes at the location d ¼ 0 where the light is linearly polarized along Ox. We will present the refractive index after the exposure again as Dn=2 0 : ð3:101Þ n ¼ n0 þ n þ 0 Dn=2 Similarly, we can write for the extinction coefficient, a, Da=2 0 ; a ¼ a0 þ a þ 0 Da=2
ð3:102Þ
54
Theory of polarization holography
assuming that the values of a are different for the parallel (along the axis Ox) and perpendicular directions; Da ¼ ax ay ¼ ak a? is the photoinduced anisotropy in the extinction coefficient. Then, for the Jones matrix describing the transmittance at this location, we will have T ¼ expðþi’Þ exp½ða0 þ aÞd " d expði D’Þ exp Da 2 · 0
0
exp
#
Da ; 2 d expði D’Þ
ð3:103Þ
where d is the grating thickness, ’ ¼ 2pðn0 þ nÞd=k; D’ ¼ p Dn d=k. In the grating, the direction of the induced optical axis changes periodically at each location; it is at an angle d, 2d(x) being the phase difference between the two recording waves. Then, we can obtain the Jones matrix describing the grating transmittance through ð3:104Þ
T ¼ RðdÞTd¼0 RðdÞ; where RðdÞ ¼
cos d sin d sin d cos d
ð3:105Þ
is the rotation matrix. Substitution of (3.103) and (3.105) into (3.104) yields T ¼ T0 þ T1 ;
ð3:106Þ
where T0 ¼ expði’Þ exp½ða0 þ aÞd 1 Da Da · cosðD’Þ cosh d þ i sinðD’Þ sinh d 2 2 0
0 ; 1
ð3:107Þ
Da Da d þ i sinðD’Þ cosh d T1 ¼ expði’Þ exp½ða0 þ aÞd cosðD’Þ sinh 2 2 cosð2dÞ sinð2dÞ · : sinð2dÞ cosð2dÞ ð3:108Þ It is readily seen that the term T0 is related to the undiffracted 0th-order wave. Its polarization remains unchanged and its amplitude depends on a0 þ a, Da, and D’. From the matrix T1 describing the diffraction from the grating it may be
3.6 Transmission polarization holograms
55
concluded that, just like in the case of a lossless phase grating of this type, only two orders of diffraction exist: þ1 and 1. To obtain the properties of the diffracted waves we will choose a reconstructing wave R0 with arbitrary ellipticity 1 1 0 R ¼ pffiffiffi : ð3:109Þ 2 expðiDÞ Then, the þ1 and 1 order diffracted waves are given by C 1 þ expðiDÞ Eþ1 ¼ expði2dÞ i½1 þ expðiDÞ 2
ð3:110Þ
and E1
C 1 expðiDÞ ¼ expði2dÞ ; i½1 expðiDÞ 2
ð3:111Þ
where C ¼ expði’0 Þ exp½ða0 þ aÞd Da Da · cosðD’Þ sinh d þ i sinðD’Þ cosh d : 2 2
ð3:112Þ
It is seen that the polarizations of the diffracted waves are right-hand and lefthand circular independently of the polarization of the reconstructing beam; they reproduce the polarization of the two waves used during the recording. Just like in the case of a lossless phase grating of this type their intensities Iþ1 and I1 depend on the polarization of R0 . If R0 is linearly polarized (D ¼ 0), then I þ1 ¼ I 1 ¼ jC j2 =2;
ð3:113Þ
and this does not depend on the polarization azimuth. If D 6¼ 0, there is energy transfer between the þ1 and 1 orders of diffraction depending on the value of D. If R0 has right-circular polarization (D ¼ p/2), then Iþ1 ¼ 0, I1 ¼ |C|2; in this case, all the diffracted light is transferred to the 1 order wave which has left circular polarization. If D ¼ p/2, that is, if R0 has left-circular polarization, then I1 ¼ 0, Iþ1 ¼ |C|2. This means that mixed (with both amplitude and phase modulation) polarization gratings of this type can also be used in polarimetry for an easy measurement of the fourth Stokes parameter S3. 3.6.6 Volume polarization holograms In our considerations in the previous sections we have studied the properties of the different types of polarization holograms using the Jones-matrix method. This
56
Theory of polarization holography
technique helps to give a description of the characteristics of thin polarization holograms. The interaction of light waves and such a grating gives rise, in the general case, to a large number of diffracted waves, as has been shown. When holograms are recorded in a volume material the situation is different. As a rule only one diffracted wave is generated. Transmission volume holograms exhibit selectivity with respect to the angle of incidence of the reconstructing wave R0 . If R0 has the same wavelength as the recording waves, it must be identical to one of the recording beams, and the other recorded beam is generated within the hologram. For plane waves, illuminating beams with other wavelengths can also be used but the Bragg condition should be satisfied: 2K sin h ¼ k;
ð3:114Þ
where K is the grating period, k the wavelength of the reconstructing wave, and h its angle of incidence. Light propagating within volume holograms cannot be described with the Jones-matrix formalism. The behavior of the waves in this case must be obtained as a solution of the wave equation r2 E c2 E ¼ 0:
ð3:115Þ
Here E is the electric vector of the light wave, and c is usually divided into real and imaginary parts: rffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffi r pffiffiffiffiffiffiffi ; ð3:116Þ c ¼ ix le0 er i xe0 where x is the angular frequency, l is the permeability of the recording material, r is its conductivity, e ¼ e0er is the permittivity, and e0 ¼ er and e00 ¼ r/xe0, are the real and imaginary parts of the relative complex permittivity. The best approach to the solution of the wave equation in volume holograms is the coupled-wave technique first proposed by Kogelnik [17]. Mathematically it is represented by a set of coupled differential equations derived from the wave equation. They couple the reconstructing wave R and the signal wave S generated by the hologram. The total electric vector is the sum of these two waves, ~ rÞ þ ~ S expði~ kS ~ rÞ; E ¼~ R expði~ kR ~
ð3:117Þ
kS are the wave vectors of R and S, and ~ r is the radius vector. where ~ kR and ~ Kogelnik’s theory gives quite a satisfactory description of the properties of isotropic holographic gratings with uniform and straight grating fringes. It assumes that the gratings already exist and does not examine their formation during the recording process. Therefore, it cannot be directly applied to volume polarization holograms in photoanisotropic materials for at least two reasons. First, after the
3.6 Transmission polarization holograms
57
polarization recording the permittivity e of the photoanisotropic material becomes anisotropic, and in (3.116) it should be represented as a tensor. The spatially varying elements of the tensor e depend on the polarization of the recording waves. Second, practically all photoanisotropic materials are real-time recording media. Polarization holograms in them do not need any developing and fixing as in conventional silver-halide holographic plates. Modulation of the optical constants and self-diffraction take place during the recording process, influencing and changing the interference light field inscribing the hologram. As a result the steady-state interference pattern should depend on the coordinate z, along the depth of the material. Finally, light absorption in the volume of the material should be taken into account. A detailed study of the writing and read-out of volume polarization holograms in photoanisotropic materials was carried out by Huang and Wagner in [18]. They investigated holographic grating formation with two plane waves in cases with four different recording geometries, determined by four different combinations of the polarizations of the recording waves – parallel linear, orthogonal linear, identical circular and orthogonal circular – taking into account the real-time character of the recording. There are two main results from the self-diffraction in volume materials during the grating formation when the ratio of the intensities of the recording waves m0 6¼ 1. (i) There is an energy coupling from one beam to another and the ratio m varies with the material thickness: m ¼ m(z); m(z) 6¼ m(0) ¼ m0; thus the holographic modulation is not uniform in the z direction. The energy coupling depends on the imaginary part of the coupling constant, b00 , in the differential equations for coupled waves. (ii) The phase difference w ¼ ’R ’S ¼ ~ kR ~ r ~ kS ~ r between the two beams R and S also varies with z. As a result the fringes become slanted and bent. An example is shown in figure 3.17 for the case of two recording waves with parallel linear polarizations. In this case the interference pattern consists of bright and dark fringes. The direction of the fringe curvature depends on the photoanisotropic material used. The fringes bend towards the direction of propagation of the more intense beam R if the real part of the complex coupling constant, b 0 , is positive (b0 > 0) and towards the weaker beam S if b0 < 0. It depends on the variation of the phase difference between the two recording beams with the thickness of the hologram (on the sign of dw/dz). Since the holographic modulation and the self-diffraction are different in the four recording geometries, the ratios m(z)/m0 and dw/dz are also different in these four cases. This is shown in table 3.2.
Note that, in cases 2 and 4, there is no intensity interference pattern and the fringes are formed at the locations with identical polarization states. Because of the tilting of the fringes in the steady state, the maximum diffraction efficiency of the recorded holographic gratings does not occur at the
58
Theory of polarization holography
Table 3.2. The ratios m(z)/m0 and dw/dz for the four types of recording geometry
(a)
Polarizations
m(z)/m0
dw/dz
1. 2. 3. 4.
<1 >1 <1 <1
>0 <0 >0 >0
Parallel linear Orthogonal linear Identical circular Orthogonal circular
b⬘ > 0
(b)
b⬘< 0 R
R
z S
S
Fig. 3.17 The direction of the fringe curvature when m0 6¼ 1 depends on the sign of the real part b 0 of the coupling constant. (From T. Huang and K. H. Wagner. Holographic diffraction in photoanisotropic organic materials. J. Opt. Soc. Am. A 10 (1992) 306–315.) Reproduced with permission from the Optical Society of America.
Bragg angle determined by (3.114), and the read-out angle must be adjusted to satisfy the Bragg condition. The grating vector diagram at steady state compared with the diagram at the beginning of the exposure is shown in figure 3.18. The difference between the two diagrams is due to the tilt of the grating fringes (grating planes) from the bisector of the recording beams. When dw/dz becomes large and the fringes are also bent, the achievable diffraction efficiency is smaller. In [18, 19] the authors also derive analytical solutions concerning the diffraction efficiencies g corresponding to the four recording geometries. The holographic modulation and g are different for low- and high-intensity regimes. When the intensity increases the saturation of the photoinduced process must be taken into account. In their works Huang and Wagner investigate holographic storage in polyvinyl alcohol (PVA) films containing the azo-dye methyl orange. They assume that the only photoprocess in this material is the orientationdependent trans–cis isomerization (see chapter 4) of the dye molecules resulting in anisotropic bleaching of the trans isomer’s absorption band and the appearance of birefringence related to it. The saturated values of the concentrations of trans and cis molecules depend on the light intensity I and the lifetime of the cis isomers. As a result, the g(I) curves go through a maximum and then decrease.
3.6 Transmission polarization holograms
59
Table 3.3. Diffraction efficiency in thick polarization holograms (according to [18]) Recording polarizations
Low intensity, m0 ¼ 1 Saturation, m0 ¼ 1
Case Case Case Case
0.12 0.017 0.019 0.07
1: 2: 3: 4:
parallel linear orthogonal linear identical circular orthogonal circular
(a)
z
0.15 0.08 0.10 0.30
(b)
z
kG kS
kG kR
y
kS
kR y
Fig. 3.18 The grating-vector diagram at the beginning of the exposure (a) and in steady state (b). (From T. Huang and K. H. Wagner. Holographic diffraction in photoanisotropic organic materials. J. Opt. Soc. Am. A 10 (1992) 306–315.) Reproduced with permission from the Optical Society of America.
The optimum intensity varies with changes of the beam ratio and the recording geometry. Although this simple photoprocess is not typical for azobenzenecontaining polymers, it is of interest to compare the calculated maximum values of the diffraction efficiency corresponding to the different recording geometries. They are given in table 3.3. In all the four types of gratings the maxima are obtained for equal intensities of the recording waves (m0 ¼ 1), corresponding to zero energy transfer from one beam to another and straight fringes. It is readily seen that in the low-intensity regime maximum diffraction efficiency is obtained in case 1 – recording waves with parallel linear polarization. This is related to the model of the photoinduced process in the material, according to which the induced birefringence is smaller than the modulation of the refractive index for the parallel polarization. Actually, this is usually not observed, as is the case in most azobenzene-containing polymers, including methyl red/PVA systems [20, 21]. In azobenzene materials the main process determining the appearance of birefringence Dn is the reorientation of the azobenzene groups
60
Theory of polarization holography
in directions perpendicular to the polarization of light. It results in a decrease of the extinction a for the parallel polarization and an increase of a for the orthogonal polarization, and is accompanied by much larger values of Dn and larger diffraction efficiency. The analytical solutions derived in [18] describe also the peculiar polarization properties of the holographic gratings in cases 2 and 4. When the grating is recorded with two beams with orthogonal linear polarizations (case 2) and then illuminated with a beam identical to one of the recording beams, the þ1 and 0th-order beams appear with orthogonal polarizations. In case 4, of polarization recording with two beams with orthogonal circular polarizations, the diffraction efficiency depends on the ellipticity of the reconstructing beam. It is a maximum for the circular polarization coinciding with the polarization of the reference beams used during the recording stage and zero for the orthogonal circular polarization. In contrast to the case for thin holograms recorded with the same geometry, there is no 1 order beam, so volume holographic gratings cannot be used in polarimetry for measuring the Stokes parameter S3.
3.7 Reflection polarization holograms in materials with linear photoanisotropy In sections 3.6.1–3.6.5 we discussed different types of transmission polarization holograms recorded in photoanisotropic materials. We have shown that they are spatially modulated anisotropic structures and have investigated their properties using the Jones matrices describing their transmittance. In this section we shall consider reflection polarization recording and shall derive the Jones matrix giving the holographic reflection and the properties of the reflected waves [22]. We shall study the simplest reflection holograms – unslanted reflection gratings recorded with two counter-propagating plane waves. Let them propagate along Oz and –Oz and let the front surface of the recording material be in the plane (x, y) (figure 3.19). We shall consider two cases of recording, Case A: the two waves have orthogonal linear polarizations; we shall take them at þ45 and 45 with respect to the Ox axis. Case B: the two waves have orthogonal circular polarizations. Actually, the two waves in case B have right-circular polarization but, since they are counter-propagating, their electric vectors rotate in opposite senses, so they are described by the Jones vectors (3.119).
The Jones vectors of the recording waves and the resulting interference light fields in these two cases are
3.7 Linear photoanisotropy
61
z E2
x O
E1 –z
Fig. 3.19 The recording geometry.
1 1 1 1 E1 ¼ expðidÞ; E2 ¼ expðidÞ; 2 1 2 1 cos d E ¼ E 1 þ E2 ¼ i sin d
ð3:118Þ
1 1 1 1 expðidÞ; E2 ¼ expðidÞ; E1 ¼ 2 i 2 i cos d E ¼ E 1 þ E2 ¼ sin d
ð3:119Þ
in case A and
in case B, where d ¼ 2p nz=k0 ; k0 is the wavelength of the recording light in free space and n is the average refractive index of the material. This interference pattern, which has constant intensity but continuously varying polarization according to the phase difference of the recording waves, induces periodic anisotropy in the refractive index along the Oz axis with period 2d. Reflection polarization holograms are recorded. Using the same notation and the same technique as in sections 3.6.1 and 3.6.2, for the periodically modulated changes in the refractive index of the photoanisotropic material we can write n þ ðDn=2Þ cosð2dÞ 0 ; ð3:120Þ nA ¼ 0 n ðDn=2Þ cosð2dÞ
62
Theory of polarization holography
in case A and
n þ ðDn=2Þ cosð2dÞ nB ¼ ðDn=2Þ sinð2dÞ
ðDn=2Þ sinð2dÞ n ðDn=2Þ cosð2dÞ
ð3:121Þ
in case B, where Dn is the birefringence induced by linearly polarized light. We shall attempt now to find the Jones matrices RA and RB determining the reflectances of these two anisotropic structures. We shall use the following method. The unslanted reflection gratings are split into layers sufficiently thin that their optical parameters can be considered spatially invariant. For isotropic reflection holograms, the continuously varying periodic spatial distribution of the refractive index can be treated as a periodic stack of two homogeneous layers. For the anisotropic case, however, a two-layer structure is not sufficient to describe the holographic grating. In this simplified model, which is aimed mainly at the derivation of the polarization characteristics of the reflected waves, each period is presented by four layers of equal physical thickness. The corresponding refractiveindex tensors are obtained from (3.120) and (3.121) for 2d ¼ 0, p/2, p, 3p/2. Light polarization and the corresponding photoinduced changes in the refractive index in the four-layer structures are shown in figure 3.20.
layer
Case A polarization
Case B n
n n||
polarization
n|| i =1
n⊥
n⊥ n
i =2
n|| n
n⊥ i =3
n⊥ n|| n||
n i =4
n⊥
n
n||
n⊥
Fig. 3.20 The type of light polarization and the corresponding photoinduced anisotropy in the refractive index for the four layers representing one period of the polarization reflection grating. (From L. Nikolova and P. Sharlandjiev. Holographic reflection gratings in photoanisotropic materials. Proc. SPIE 1183 (1986) 260–267.)
3.7 Linear photoanisotropy
63
For the refractive indices ni of the four layers (i ¼ 1, 2, 3, 4) we can write ni ¼ n þ ðDn=2ÞMi ; where Mi are the following matrices: 1 0 ; M2 ¼ 0; M1 ¼ 0 1
1 M3 ¼ 0
ð3:122Þ 0 ; 1
M4 ¼ 0;
ð3:123Þ
in case A and
1 0 ; 0 1 1 0 ; M3 ¼ 0 1
M1 ¼
0 1 ; 1 0
0 1
M4 ¼
1 0
M2 ¼
ð3:124Þ
in case B. In case A one hologram period is represented by a stack of four layers, two isotropic (i ¼ 2, 4) and two uniaxial layers (i ¼ 1, 3) with interchanged fast and slow axes. In case B all four layers are uniaxial with rotation of 45 of the axes. We shall study first the phase and the polarization of the wave transmitted through such a grating. The Jones matrix giving the transmittance through one four-layer stack is T ¼ T4 T3 T2 T1 ;
ð3:125Þ
where, for case A,
expði D’Þ T1 ¼ expði’Þ 0
0 ; expði D’Þ
T2 ¼ expði’Þ;
expði D’Þ T3 ¼ expði’Þ 0
T4 ¼ expði’Þ;
ð3:126Þ
ð3:127Þ 0 ; expði D’Þ
ð3:128Þ
ð3:129Þ
where ’ ¼ 2p nd=k and D’ ¼ p Dn d/k, d being the thickness of one layer. Since d ¼ k0 =ð8 nÞ, we have ’ ¼ pk0 / (4k) and D’ ¼ p Dn k0 =ð8nkÞ. Here k0 is the
64
Theory of polarization holography
wavelength of the recording light and k is the wavelength of the light incident on the obtained grating. It is seen from (3.126)–(3.129) that 1 0 T ¼ expði4’Þ ; 0 1 that is, the polarization of the incident wave does not change after a pass through a four-layer stack (after one period of the anisotropic structure). Furthermore, we shall assume that the values of Dn are small enough (Dn 102), as they are in most of the photoanisotropic materials, and that D’ does not cause significant changes in the polarization within the stack (if Dn 102, D’ < 0.15 ). Then, we can assume that the incident wave passes through the anisotropic structure without a change in its polarization state. Similar estimation can also be done for case B. Therefore, we may treat the wave ER reflected from the holographic grating as a superposition of partial waves EkR, k ¼ 1, 2, . . . , N, reflected from the successive four-layer stacks (N is the number of stacks). For small values of Dn the reflection from one layer is negligible and the wave reflected from the holographic grating is due to a superposition of a considerably large number of partial waves EkR. On the other hand, the wave reflected by one stack (one period) is a superposition of four waves reflected from the surfaces of the anisotropic layers. For the partial wave reflected from one stack we can write
EKR ¼
4 X
R EiK expði’ik Þ;
ð3:130Þ
i¼1
where k1 R ¼ r1 Ei 1 RA;B ; E1k k1 R ; E2k ¼ r2 Ei 1 RA;B k1 R E3k ¼ r3 Ei 1 RA;B ; k1 R ; E4k ¼ r4 Ei 1 RA;B
expðiU1k Þ ¼ exp½iðk 1Þ8’; expðiU2k Þ ¼ expðiðk 1Þ8’ expði2’Þ; expðiU3k Þ ¼ expðiðk 1Þ8’ expði4’Þ; expðiU4k Þ ¼ expðiðk 1Þ8’ expði6’Þ:
ð3:131Þ
Here we have taken into account that each partial wave passes twice through the corresponding number of layers. We have also assumed that the amplitude of the incident wave does not change within a stack, but is decreased by (1 RA)k1 or (1 RB)k1 after passing through the stack, where RA and RB are the absolute values of the amplitude of a wave reflected from one stack in cases A and B. The Jones matrices ri (i ¼ 1, 2, 3, 4) determining the reflection from the four different layers in the stack are related to the corresponding refractive index tensors given with (3.120), (3.121), and (3.122). ri can be obtained using the Fresnel formula for normal incidence, they are different
3.7 Linear photoanisotropy
65
for the two cases considered, according to the different matrices Mi. We obtain for case A 1 0 1 0 r1 ¼ r ; r2 ¼ r ; 0 1 0 1 ð3:132Þ 1 0 1 0 ; r4 ¼ r ; r3 ¼ r 0 1 0 1 and for case B pffiffiffi 1 0 ; r1 ¼ r 2 0 1 pffiffiffi 1 0 r3 ¼ r 2 ; 0 1
pffiffiffi 0 1 r2 ¼ r 2 ; 1 0 pffiffiffi 0 1 r4 ¼ r 2 ; 1 0
ð3:133Þ
where r ¼ Dn=ð4nÞ. In case B we have written the matrices ri in a coordinate system rotated through p/8 around the axis Oz in order to simplify the calculations. Let the reconstructing wave have the same wavelength as the recording wave: k ¼ k0. Then ’ ¼ p/4, and we have expðiUik Þ ¼ 1, expðiUik Þ ¼ i, expðiU3k Þ ¼ 1, and expðiU4k Þ ¼ i. For the partial waves EkR we may write, for case A, EKR
¼r
1 0 i þ 0 1 0
0 1 0 i 0 þ þ Ei ð1 RA Þk1 ; i 0 1 0 i
or E Rk
1 i
0
ð1 RA Þk1 Ei ; ¼ 2r
0 ð1 iÞ
ð3:134Þ
and for case B EKR
pffiffiffi 1 ¼r 2 0
0 0 þ 1 i
i 1 0 0
0 0 i Ei ð1 RB Þk1 ; 1 i 0
or EkR
pffiffiffi 1 ¼ 2r 2 i
i ð1 RB Þk1 Ei : 1
ð3:135Þ
We can find RA and RB by calculating the normalized amplitude of a partial wave, for example the first partial wave. In case A we obtain
66
Theory of polarization holography
E1R
0 E: ð1 iÞ i
1i ¼ 2r 0
ð3:136Þ
If 1 ; Ei ¼ 0 we get
E1R
1i ¼ 2r ; 0
and pffiffiffi
R
E ¼ RA ¼ 2r 2: 1
ð3:137Þ
By analogy, for the case B we have pffiffiffi RB ¼ 4r 2:
ð3:138Þ
The total wave ER reflected from the hologram is obtained after a summation over all the four-layer stacks, ER ¼
N X
EkR :
ð3:139Þ
k¼1
For the Jones matrices determining the holographic reflection from the total anisotropic structure, we obtain (within the approximation Dn 1) 0 N 1 i 1 pffiffiffi RA ¼ 1 ð1 RA Þ ; ð3:140Þ 2 0 1 and
RB ¼ 1 ð1 RB Þ
N 1
1 2 i
i : 1
ð3:141Þ
We shall now study the properties of the reflected waves. We shall discuss first case A. Let the incident wave have linear polarization, at an angle a, sin a 0 R ¼ : ð3:142Þ cos a
3.7 Linear photoanisotropy
Then the holographically reflected wave is pffiffiffi cos a R ; EA ¼ g sin a
67
ð3:143Þ
where g is the diffraction efficiency in the approximation being considered. Note that, for large values of N, in a lossless material g can reach theoretically 100%. It does not depend on the polarization of the incident wave. For the polarization of the diffracted wave it is seen that, just like in the case of transmission polarization holograms recorded with two waves with orthogonal linear polarization, it is rotated through an angle 2a. That is, for the holographically reflected wave the anisotropic structure obtained in this case acts as a reflection k/2 plate with axes at 45 with respect to the polarization direction of the recording waves. If the incident wave has the polarization of one of the recording waves, the diffracted wave has orthogonal polarization; it also has orthogonal polarization with respect to the 0th-order reflected wave from the surface of the hologram. If the incident wave has circular polarization, the diffracted wave has orthogonal circular polarization. To study the reflection in case B we will take an incident wave R0 , propagating along Oz, as the recording wave E1, which is left-circularly polarized. Let the polarization of R0 be elliptic, 1 1 0 R ¼ pffiffiffi ; ð3:144Þ 2 expðiDÞ with ellipticity determined by the value of D. Then the holographically reflected wave is pffiffiffi g 1 þ i expðiDÞ R : ð3:145Þ EB ¼ pffiffiffi 2 2 i½1 þ expðiDÞ It is seen that, independently of the ellipticity of R0 , the diffracted wave has rightcircular polarization just like the second wave used during the recording. Its intensity, however, depends on the ellipticity of the incident wave. It has maximum intensity (g can reach 100% in a lossless material) for D ¼ p/2 corresponding to left-circular polarization of R0 (the polarization of E1) and zero intensity for the orthogonal circular polarization (D ¼ p/2). Thus, the reflectance is selective with respect to light polarization. This behavior is just like that of cholesteric liquid crystals. Actually, the photoinduced anisotropic structure in this case is analogous to the structure of cholesterics since the induced optical axis is gradually rotated along the depth of the hologram. In summary, the properties of the waves diffracted from reflection polarization holograms are similar to those of transmission polarization holograms. In the case
68
Theory of polarization holography
of gratings recorded with two waves with orthogonal linear polarizations the intensity of the reflected (þ1 order diffracted) wave does not depend on the polarization of the reconstructing wave but its polarization does. When the hologram is obtained with two waves with orthogonal circular polarizations the polarization of the reflected wave is fixed but the reflectance depends on the polarization of the incident wave. 3.8 Polarization-holographic recording in materials with linear and circular anisotropy In our study until now we have considered polarization-holographic recording in materials with linear photoanisotropy only. In some of the photoanisotropic media, however, circular birefringence (optical activity) is also induced when the exciting light is circularly polarized. Such materials include, for example, liquidcrystalline azobenzene-containing polymers. Here we shall investigate the influence of circular birefringence on the properties of the holograms [23]. The origin of the photoinduced circular birefringence in azobenzene polymers is discussed in [24]. We shall use again the Jones-matrix formalism. The Jones matrix determining the optical transmittance of a lossless material with both linear and circular birefringence can be obtained using T ¼ expðiKzÞ;
ð3:146Þ
where the wave matrix K is " 2p njj K¼ k i Dn2cir
# i Dn2cir : n?
ð3:147Þ
Here nk and n? are the values of the refractive index for light polarized parallel or perpendicular to the optical axis of the material. When the linear birefringence is photoinduced nk is the refractive index for the direction parallel to the light polarization. Dncir ¼ nl nr is the circular birefringence, Dnl and Dnr are the refractive indices for the left- and right-circularly polarized components of the light. The matrix (3.147) can also be written in the form 2p p Dnlin i Dncir ; ð3:148Þ DK ¼ K ¼ n þ DK; k k i Dncir Dnlin where n ¼ ðnk þ n? Þ=2 and Dnlin ¼ ðnk n? Þ. Let the material be initially isotropic and let the illumination with elliptically polarized light give rise to both linear and circular anisotropy. We shall assume,
3.8 Linear and circular anisotropy
69
as usual, that the induced linear-birefringence axis is parallel to the axis of the polarization ellipse of the exciting light. We shall also assume that Dnlin is proportional to the difference of the intensities of light components polarized along and perpendicular to this axis, and that Dncir is proportional to the difference of the intensities of the left- and right-circularly polarized components: Dnlin ¼ 2Lða2 b2 Þ ¼ 2
qffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffi ðS12 þ S22 Þ;
Dncir ¼ 2CðI l I r Þ ¼ 2S3 :
ð3:149Þ ð3:150Þ
Here L and C are the photoresponse coefficients of the materials for linear and circular anisotropy, a and b are the semi-axes of the polarization ellipse, Il and Ir are the intensities of the left- and right-circularly polarized circular components of light, and S1, S2, and S3 are the second, third, and fourth Stokes parameters. We shall now consider polarization-holographic storage in such a material. Let the hologram be recorded with two plane waves with equal intensities and orthogonal linear polarization, horizontal and vertical, as shown in figure 3.12(a). The resultant interference field is pffiffi cos d E¼ I ; ð3:151Þ i sin d where d is the phase difference between the two waves, d ¼ d(n). This pattern has constant intensity I and a spatially varying state of polarization, as shown in figure 3.12(a). The polarization changes gradually from linear, at 45 with respect to the horizontal axis On at d ¼ 0, to right circular at d ¼ p/2, then linear at 45 , left circular at 3p/2, linear at 45 again, etc. If solely linear anisotropy is induced in the material, the locations illuminated with circular polarization remain isotropic. The properties of this kind of holographic grating were discussed in section 3.6.1. In the general case, when circular anisotropy is also induced, leftand right-circularly polarized light will give rise to different changes in the refractive index, so the recorded spatially modulated anisotropic structure, or the polarization hologram obtained, is different. We shall study its properties. The four Stokes parameters of the interference field (3.151) are S0 ¼ I; S1 ¼ I cosð2dÞ; S2 ¼ 0; S3 ¼ I sinð2dÞ;
ð3:152Þ
70
Theory of polarization holography
and the modulations of Dnlin and Dncir are Dnlin ¼ 2LI cos d;
ð3:153Þ
Dncir ¼ 2CI sinð2dÞ:
ð3:154Þ
Then, for the matrix DK determining the diffraction from the inscribed polarization grating, we obtain p DnL cosð2dÞ i DnC sinð2dÞ ; ð3:155Þ DK ¼ k i DnC sinð2dÞ DnL cosð2dÞ where DnL ¼ 2LI and DnC ¼ 2CI are the amplitudes of the modulation of the photoinduced linear and circular birefringence in the periodic anisotropic structure. To analyze the diffraction at this holographic grating, we have to calculate the Jones matrix T ¼ expði DK dÞ, where d is the grating thickness. In the general case T is " # D’C sinð2dÞ sinN N cos N þ i D’L cosð2dÞ sinN N ; ð3:156Þ T¼ D’C sinð2dÞ sinN N cos N i D’L cosð2dÞ sinNN where
p D’C ¼ DnC d; k 1 2 L C N ¼ f½D’ cosð2dÞ þ ½D’ sinð2dÞ2 g2 :
D’L ¼ p DnL d=k;
ð3:157Þ
The matrix K can be simplified in the following cases. (1) DnC ¼ 0; DnL 6¼ 0 (only linear birefringence is induced). This case has already been discussed in section 3.6.1. There are several diffraction orders; the diffraction efficiency does not depend on the polarization of the reconstructing wave. For the waves diffracted in 1 and the other even orders the holographic grating acts as a k/2 plate with fast axis at 45 with respect to the direction of the polarization of the recording wave. (2) DnL ¼ 0; DnC ¼ 6 0 (only circular birefringence is induced). In this case N ¼ D’C sin(2d), and the Jones matrix of the holographic grating becomes cos½D’C sinð2dÞ sin½D’C cosð2dÞ T¼ : ð3:158Þ sin½D’C cosð2dÞ cos½D’C sinð2dÞ There are again several diffraction orders and the diffraction efficiency does not depend on the polarization of the reconstructing wave. If the incident light is linearly polarized at an angle a, the 1 order diffracted waves have linear polarization at 90 þ a, that is, their
3.8 Linear and circular anisotropy
71
polarization is rotated through 90 irrespective of the value of a. If the incident wave is circularly polarized the diffracted waves have the same circular polarization. (3) DnL ¼ DnC 6¼ 0. In this case D’L ¼ D’C ¼ D’, N ¼ D’ and the matrix T becomes
cosðD’Þ þ i sinðD’Þ cosð2dÞ sinðD’Þ sinð2dÞ
: ð3:159Þ
T¼
sinðD’Þ sinð2dÞ cosðD’Þ i sinðD’Þ cosð2dÞ
This is a special kind of polarization grating and we shall discuss its properties in more detail here. It is easily seen that there are only three waves after it: the undiffracted, 0th-order wave, and two diffracted waves, of orders þ1 and 1. To investigate the characteristics of these three waves we shall write T as a sum of three matrices: ð3:160Þ T ¼ T0 þ Tþ1 þ T1 : The matrix
cosðD’Þ T0 ¼ 0
0 cosðD’Þ
ð3:161Þ
determines the 0th-order wave. Its intensity is [cos(D’)]2 and it has the polarization of the wave incident on the grating. The matrices Tþ1 and T1 are i sinðD’Þ 1 1 Tþ1 ¼ ; ð3:162Þ 1 1 2
T1
i sinðD’Þ ¼ 2
1 1
1 : 1
ð3:163Þ
They determine the waves diffracted in the þ1 and 1 orders. Let us now choose the wave incident on the grating to be linearly polarized at an angle a with respect to the axis Ox and to have intensity I0 ¼ 1, cos a R ¼ : sin a 0
ð3:164Þ
Using again the Jones-matrix formalism, we obtain for the two diffracted waves i sinðD’Þ cos a þ sin a 0 Sþ1 ¼ Tþ1 R ¼ ; ð3:165Þ ðcos a þ sin aÞ 2
S1
i sinðD’Þ cos a sin a ¼ T1 R ¼ : cos a sin a 2 0
ð3:166Þ
72
Theory of polarization holography
It is seen that, irrespective of the value of the angle a, the þ1 order diffracted wave is horizontally polarized, and the 1 order wave is vertically polarized. Thus, the two diffracted waves replicate the polarizations of the waves used during the recording. Their intensities are given by I þ1 ¼
sin2 ðD’Þ ½1 þ sinð2aÞ; 2
ð3:167Þ
I 1 ¼
sin2 ðD’Þ ½1 sinð2aÞ: 2
ð3:168Þ
The sum of these two intensities is sin2(D’). In the case of a ¼ 45 , if R0 has vertical polarization, replicating the polarization of one of the recording beams, Iþ1 ¼ sin2(D’), and all the energy goes into the þ1 order. Note that 100% diffraction efficiency can be reached, if D’ ¼ p/2. At the same time, I1 ¼ 0. By analogy, if a ¼ 45 (i.e., if R0 has horizontal polarization), I1 ¼ sin2(D’) and Iþ1 ¼ 0. For the other values of a there is a distribution of energy between the two diffracted orders according to (3.167) and (3.168) (see figure 3.21). If the illuminating wave R0 has circular polarization, the two diffracted waves again have vertical and horizontal polarization and their intensities are I þ1 ¼ I 1 ¼ sin2 ðD’Þ=2:
ð3:169Þ
In the general case D’C 6¼ D’L 6¼ 0 and the properties of the recorded polarization grating is neither as in cases (1) and (2) nor as in case (3). There are again only two diffracted orders and the intensities of the diffracted waves depend on the polarization of the illuminating beam R0 but do not fall to zero for any value of a. If we 1.2 1.0
1
h
0.8 0.6 0.4 0.2 0.0 –135
2 –90
–45 a, degrees
0
45
Fig. 3.21 The diffracted efficiency in the þ1 (curve 1) and 1 (curve 2) diffracted orders in the case DnL ¼ DnC 6¼ 0, D’ ¼ p/2, as a function of the azimuth of a linearly polarized illuminating wave.
3.8 Linear and circular anisotropy
73
assume small photoinduced anisotropic changes (N 1), a linear approximation can be applied, viz., cos N ¼ 1 and (sin N) /N ¼ 1. Then, the matrix T becomes " # 1 þ i D’L cosð2dÞ D’C sinð2dÞ T¼ : ð3:170Þ D’C sinð2dÞ 1 i D’L cosð2dÞ If the reconstructing wave is linearly polarized, we obtain for the Jones vectors of the waves diffracted in the þ1 and 1 orders # " L D’ D’C cos a þ sin a 2 2 ; ð3:171Þ Eþ1 ¼ D’L D’C sin a þ cos a 2 2
L
D’ D’C
2 cos a 2 sin a
E1 ¼ L ð3:172Þ
:
D’ sin a D’C cos a
2
2
The two diffracted waves again have linear polarization but their azimuth depends on the ratio D’C/D’L. There is again a distribution of energy between the two diffracted orders depending on the azimuth a. The two intensities are 1 I 1 ¼ ½ðD’L Þ2 þ ðD’C Þ2 2 D’L D’C sinð2aÞ: 4
ð3:173Þ
For a ¼ 45 (vertical polarization of the reconstructing beam) the intensity Iþ1 is a maximum and I1 a minimum, and for a ¼ 45 I1 is maximum and Iþ1 is minimum. This is illustrated in figure 3.22.
0.05 1 0.04 0.03 h
3 0.02
2
0.01 0.00 –135
–90
–45 a, degrees
0
45
Fig. 3.22 The dependence of the intensities of the two diffracted waves on the azimuth of a linearly polarized illuminating wave for D’L ¼ 0.3, D’C ¼ 0.2 (curves 1 and 2) and D’L ¼ 0.3, D’C ¼ 0 (curve 3).
74
Theory of polarization holography
It is worth noting here that, by measuring the values of Iþ1 and I1 for a ¼ 45 and a ¼ 45 , one can obtain the values of D’L and D’C using pffiffi pffiffi ð3:174Þ D’L ¼ I þ1 þ I 1 ;
D’C ¼
pffiffi pffiffi I þ1 I 1 :
ð3:175Þ
This can be used as a holographic method for measuring the photoinduced linear and circular birefringence in a material.
3.9 Polarization gratings together with a surface relief: orthogonally circularly polarized beams Experiments have shown that higher-order diffracted spots appear on recording a polarization hologram in azobenzene polymers. Atomic-force microscopic (AFM) investigations indeed show the presence of a surface relief grating with the same period as the anisotropic grating. This topological grating will cause an additional spatially varying phase shift. A question that cannot be answered through AFM investigations alone concerns the phase relationship between this modulation and the anisotropy grating. Holme et al. [25–27] found a method of separating the contribution of the surface relief grating from that of the anisotropy grating on the basis of diffraction from the grating. This method allows one to estimate the contributions from the anisotropy grating and surface relief grating to the diffraction efficiency in real time. The modulated thickness of the material can be approximated by the following expression: h ¼ h0 þ Dh cosð2d þ d0 Þ;
ð3:176Þ
where d0 is a phase shift that is introduced in order to allow a spatial shift between the topographical and the anisotropy grating. The transmission matrix for the topography grating is polarization-independent and can be written as
" =topo ¼ "
ei Dn Dh
2p k
#
cosð2dþd0 Þ
0
0
eiDn Dh
2p k
cosð2dþd0 Þ
# 0 ei Dw cosð2dþd0 Þ ; ¼ ei Dw cosð2dþd0 Þ 0
ð3:177Þ
where 2 Dw ¼ 2 Dn Dh 2p=k is the extra phase acquired when passing through the peak of the modulation, compared with when passing through a valley. Dn is
3.9 Orthogonally circularly polarized light
75
the difference in refractive index between air and the polymer, and k is the wavelength of the read-out beam. d0 is defined such that Dw > 0. As long as the height of the topography grating is small compared with the total thickness of the film and the phase shift from anisotropy acquired in the topographical modulation is small, the topography can be considered as a thick phase mask on top of the anisotropy grating.
3.9.1 The total transmission matrix for both optical anisotropy and surface relief The total transmission matrix can be written as the matrix product of =topo and =ani (equation (3.43)): " # ei Dw cosð2dþd0 Þ 0 =tot ¼ 0 ei Dw cosð2dþd0 Þ cosðD’Þ þ i sinðD’Þ cosð2dÞ i sinðD’Þ sinð2dÞ A B · ¼ ; i sinðD’Þ sinð2dÞ cosðD’Þ i sinðD’Þ cosð2dÞ C D ð3:178Þ where A ¼ ei Dw cosð2dþd0 Þ ½cosðD’Þ þ i sinðD’Þ cosð2dÞ; B ¼ iei Dw cosð2dþd0 Þ sinðD’Þ sinð2dÞ; C ¼ iei Dw cosð2dþd0 Þ sinðD’Þ sinð2dÞ;
ð3:179Þ
D ¼ ei Dw cosð2dþd0 Þ ½cosðD’Þ i sinðD’Þ cosð2dÞ: Using the expansion ei Dw cosð2dþd0 Þ ¼ J0 ðDwÞ þ 2
1 X
ð1Þn fiJ2n1 ðDwÞ cosð2n 1Þð2d þ d0 Þ
n¼1
þ J2n ðDwÞ cos½2nð2d þ d0 Þg ¼
1 X
in Jn ðDwÞeinð2dþd0 Þ
n¼1
¼ J0 ðDwÞ þ
1 X
in Jn ðDwÞðeinð2dþd0 Þ þ einð2dþd0 Þ Þ;
n¼1
ð3:180Þ we can write the expressions for A, B, C, and D
76
Theory of polarization holography
" A ¼ J0 ðDwÞ þ
1 X
# in Jn ðDwÞðeinð2dþd0 Þ þ einð2dþd0 Þ Þ
n¼1
ei2d þ ei2d ; · cosðD’Þ þ i sinðD’Þ 2 " # 1 X B ¼ i J0 ðDwÞ þ in Jn ðDwÞðeinð2dþd0 Þ þ einð2dþd0 Þ Þ n¼1
ei2d ; 2i # 1 X in Jn ðDwÞðeinð2dþd0 Þ þ einð2dþd0 Þ Þ C ¼ i J0 ðDwÞ þ · sinðD’Þ "
e
i2d
ð3:181Þ
n¼1
ei2d ; 2i # 1 X in Jn ðDwÞðeinð2dþd0 Þ þ einð2dþd0 Þ Þ D ¼ J0 ðDwÞ þ · sinðD’Þ "
e
i2d
n¼1
ei2d þ ei2d : · cosðD’Þ i sinðD’Þ 2 We obtain the following expressions for the 0th-, 1st-, 2nd-order diffraction of A, B, C, D: " # 1 X n inð2dþd0 Þ inð2dþd0 Þ A ¼ J0 ðDwÞ þ i Jn ðDwÞðe þe Þ n¼1
ei2d þ ei2d · cosðD’Þ þ i sinðD’Þ 2 ¼ ½J0 ðDwÞ cosðD’Þ J1 ðDwÞ sinðD’Þ cosðd0 Þ i þ J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þeid0 J2 ðDwÞ sinðD’Þei2d0 ei2d 2 i þ J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þeid0 J2 ðDwÞ sinðD’Þei2d0 ei2d 2 i þ J1 ðDwÞ sinðD’Þeid0 2J2 ðDwÞ cosðD’Þei2d0 þ J3 ðDwÞ sinðD’Þei3d0 ei4d 2 i þ ½ J1 ðDwÞ sinðD’Þeid0 2J2 ðDwÞ cosðD’Þei2d0 2 þ J3 ðDwÞ sinðD’Þei3d0 ei4d þ ; ð3:182Þ
3.9 Orthogonally circularly polarized light
" B ¼ i J0 ðDwÞ þ
1 X
77
# in Jn ðDwÞðeinð2dþd0 Þ þ einð2dþd0 Þ Þ
n¼1
ei2d 2i 1 ¼ 0 sinðD’Þ J0 ðDwÞ þ J2 ðDwÞei2d0 ei2d 2 1 þ sinðD’Þ J0 ðDwÞ þ J2 ðDwÞei2d0 ei2d 2 1 sinðD’Þ J1 ðDwÞeid0 J3 ðDwÞei3d0 ei2:2d 2 1 sinðD’Þ J1 ðDwÞeid0 J3 ðDwÞei3d0 ei2:2d þ ; 2 · sinðD’Þ
e
i2d
C ¼ B; " D ¼ J0 ðDwÞ þ
1 X
ð3:183Þ
ð3:184Þ # inð2dþd0 Þ
i Jn ðDwÞðe n
þe
inð2dþd0 Þ
Þ
n¼1
ei2d þ ei2d · cosðD’Þ i sinðD’Þ 2 ¼ ½J0 ðDwÞ cosðD’Þ þ J1 ðDwÞ sinðD’Þ cosðd0 Þ i þ J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þeid0 þ J2 ðDwÞ sinðD’Þei2d0 ei2d 2 i þ J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þeid0 þ J2 ðDwÞ sinðD’Þei2d0 ei2d 2 i þ þJ1 ðDwÞ sinðD’Þeid0 2J2 ðDwÞ cosðD’Þei2d0 J3 ðDwÞ sinðD’Þei3d0 ei4d 2 i þ ½ þ J1 ðDwÞ sinðD’Þeid0 2J2 ðDwÞ cosðD’Þei2d0 2 J3 ðDwÞ sinðD’Þei3d0 ei4d þ ð3:185Þ In the above expressions, the Jx are Bessel functions of the first kind and the subscript x denotes the order of the Bessel function.
78
Theory of polarization holography
3.9.2 The first-order-of-diffraction matrix If we pick out the terms which involve only the þ1 order diffracted beam, we get the following matrix þ1 A Bþ1 ; ð3:186Þ ¼ =þ1 tot C þ1 Dþ1 where Aþ1 ¼
i J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þeid0 J2 ðDwÞ sinðD’Þei2d0 ; 2 ð3:187Þ
1 Bþ1 ¼ sinðD’Þ J0 ðDwÞ þ J2 ðDwÞei2d0 ; 2
ð3:188Þ
1 C þ1 ¼ sinðD’Þ J0 ðDwÞ þ J2 ðDwÞei2d0 ; 2
ð3:189Þ
Dþ1 ¼
i J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þeid0 þ J2 ðDwÞ sinðD’Þei2d0 : 2 ð3:190Þ
Using these expressions, we can write for the total field þ1 Etx Etyþ1 diffracted into the þ1 order, given a read-out beam Erx ; Ery
Etxþ1 Etyþ1
Aþ1 ¼ C þ1
Bþ1 Dþ1
Erx : Ery
ð3:191Þ
We can now look at two situations: with a horizontally or a vertically linearly polarized read-out beam. For horizontally polarized input light
3.9 Orthogonally circularly polarized light
79
1 ; 0 we get " # þ1 EHH þ1 EHV
¼
=þ1 tot
1 0
" # 1 i½J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þeid0 J2 ðDwÞ sinðD’Þei2d0 : ¼ 2 sinðD’Þ½J0 ðDwÞ þ J2 ðDwÞei2d0 ð3:192Þ
For vertically polarized light
0 ; 1
we get "
þ1 EVH þ1 EVV
# ¼ =þ1 tot
0 1
" # sinðD’Þ½J0 ðDwÞ þ J2 ðDwÞei2d0 1 ; ¼ 2 i½J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þeid0 J2 ðDwÞ sinðD’Þei2d0
ð3:193Þ where EHH is the horizontal component of the diffracted light with horizontal input polarization, EHV is the vertical component of the diffracted light with horizontal input polarization, and EVH and EVV denote the horizontal and vertical components for vertical input polarization. 3.9.3 Determination of the phase shift between topography and anisotropy gratings, d0 The intensities detected in the 1st orders are given by IVV ¼ jEVV j2 ;
IVH ¼ jEVH j2 ;
IHV ¼ jEHV j2 ;
IHH ¼ jEHH j2 : ð3:194Þ
For small values of Dw we can write the following expressions for IVV and IHH, for the case of D’ < 0:
2 1
IHH ’ J0 ðDwÞ sinðjD’jÞ þ 2J1 ðDwÞ cosðDfÞeid0 ; 4 ð3:195Þ
1
id0 2 IVV ’ þJ0 ðDwÞ sinðjD’jÞ þ 2J1 ðDwÞ cosðDfÞe : 4
80
Theory of polarization holography
From symmetry considerations, we assume that d0 2 f0; p=2; p; 3p=2g. If d0 ¼ 0, IVV > IHH. In this case, the valley of the topographical grating coincides with the vertical polarization of the recording field. If d0 ¼ p, IVV < IHH. In this case the peak of the topographical grating coincides with the vertical polarization of the recording field. 3.9.4 Calculation of Dw and Du from detected intensities IVV, IVH, IHV, IHH For the case of d0, we can write the total expression for the detected intensities in the þ1 order as 1 þ1 ¼ ½J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þ J2 ðDwÞ sinðD’Þ2 ; IHH 4
ð3:196Þ
1 þ1 ¼ sin2 ðD’Þ½J0 ðDwÞ þ J2 ðDwÞ2 ; IHV 4
ð3:197Þ
1 þ1 ¼ sin2 ðD’Þ½J0 ðDwÞ þ J2 ðDwÞ2 ; IVH 4
ð3:198Þ
1 þ1 ¼ ½J0 ðDwÞ sinðD’Þ þ 2J1 ðDwÞ cosðD’Þ þ J2 ðDwÞ sinðD’Þ2 : ð3:199Þ IVV 4 þ1 þ1 þ1 þ1 From the measured intensities IVV , IVH , IVH , IHH , we can calculate D’ and Dw. As long as Dw is not too large, J0 ðDwÞ ’ 1 ðDwÞ2 =4 þ OðDwÞ4 ’ 1. Thus we get pffiffiffiffiffiffiffi pffiffiffiffiffiffiffi ð3:200Þ jD’j ’ sin1 ð2 IHV Þ ¼ sin1 ð2 IVH Þ:
Since D’ is now known, we can derive the equations for Dw: pffiffiffiffiffiffiffi pffiffiffiffiffiffiffi IVV IHH ¼ 2J1 ðDwÞ cosðD’Þ;
ð3:201Þ
pffiffiffiffiffiffiffi pffiffiffiffiffiffiffi IVV IHV ¼ J1 ðDwÞ cosðD’Þ þ J2 ðDwÞ sinðD’Þ ’ J1 ðDwÞ cosðD’Þ;
ð3:202Þ
pffiffiffiffiffiffiffi pffiffiffiffiffiffiffi IHV IHH ¼ J1 ðDwÞ cosðD’Þ J2 ðDwÞ sinðD’Þ ’ J1 ðDwÞ cosðD’Þ;
ð3:203Þ
3.10 Orthogonally linearly polarized light
pffiffiffiffiffiffiffi pffiffiffiffiffiffiffi IVV IHH Dw ’ 2J1 ðDwÞ ¼ : cosðD’Þ
81
ð3:204Þ
The above choices are made assuming that |D’| > |Dw|. Lagugne´ Labarthet et al. recently extended this treatment to the case of circularly polarized read-out light. In this case exact values for the induced phase due to anisotropy and surface relief have been obtained, without making any assumption regarding the value of d0. þ1 þ1 , IHV IVV, IHH, then From the above equations it is seen that that, if IVH surface relief dominates. On the other hand, if IVV, IVH, IHV, and IHH are approximately equal, then anisotropy is the dominating factor. 3.10 Polarization gratings together with a surface relief: orthogonally linearly polarized pump beams We shall now consider the case of two linearly polarized pump beams. 3.10.1 Evaluation of the total field from two linearly polarized pump beams One can utilize two sets of linearly polarized pump beams: one with vertically and horizontally (vh) polarized light, and one with the beams polarized at 45 . The total fields in these two cases can be written as
vh Ex 0 eid eid þ id ¼ id ; ¼ Ey e 0 e 45 1 eid 1 eid 2 cos d Ex ¼ pffiffiffi id þ pffiffiffi id ¼ pffiffiffi : Ey 2 e 2 e 2 sin d
ð3:205Þ ð3:206Þ
3.10.2 The transmission matrix for anisotropy The transmission matrix for the anisotropy for the case of two write beams polarized at 45 , =45 ani ; can be written as " # i D’ cosð2dÞ e 0 =45 ani ¼ 0 eiD’ cosð2dÞ ð3:207Þ 0 J0 ðD’Þ þ 2iJ1 ðD’Þ cosð2dÞ : ¼ 0 J0 ðD’Þ 2iJ1 ðD’Þ cosð2dÞ
82
Theory of polarization holography
Here we have neglected any circular anisotropy in the materials. The transmission matrix for the anisotropy part for the case of a horizontally and vertically polarized pump beam is identical to the above in a coordinate system rotated by þ45 : " # i D’ cosð2dÞ e 0 vh =~ani ¼ 0 ei D’ cosð2dÞ ð3:208Þ 0 J0 ðD’Þ þ 2iJ1 ðD’Þ cosð2dÞ ; ’ 0 J0 ðD’Þ 2iJ1 ðD’Þ cosð2dÞ where the
~ indicates a rotated coordinate system. 3.10.3 The transmission matrix for topography
The transmission matrix for the induced topography can be written as " # i Dw cosð2dþd0 Þ e 0 =45 topo ¼ 0 ei Dw cosð2dþd0 Þ ð3:209Þ 1 0 ; ’ ½J0 ðDwÞ þ 2iJ1 ðDwÞ cosð2d þ d0 Þ 0 1 where again d0 is inserted to allow for a phase shift between the topography and the anisotropy grating, and Dw is the phase shift due to surface modulation given by Dw ¼ p Dn d=k;
ð3:210Þ
where d is the amplitude of the surface modulation. Again we assume here that Dw is small enough for higher-order terms to be neglected. 3.10.4 The total transmission matrix The transmission matrix can be written as =topo =ani ; the matrix describing the light diffracted into the þ1 order can be written as =45 þ1 ¼
0 i½J0 ðDwÞJ1 ðD’Þ þ J0 ðD’ÞJ1 ðDwÞeid0 : 0 i½J0 ðDwÞJ1 ðD’Þ þ J0 ðD’ÞJ1 ðDwÞeid0 ð3:211Þ
3.10 Orthogonally linearly polarized light
83
3.10.5 Determination of the phase shift between topography and anisotropy gratings d0 The intensity diffracted into the þ1 order by a linearly (vertically or horizontally) polarized beam is
2 IVV ¼ J0 ðDwÞJ1 ðjD’jÞ þ J0 ðjD’jÞJ1 ðDwÞeid0 I0 ;
ð3:212Þ
2 IHH ¼ þJ0 ðDwÞJ1 ðjD’jÞ þ J0 ðjD’jÞJ1 ðDwÞeid0 I0 :
ð3:213Þ
In the case of the pump beams polarized at 45 , if IVV > IHH, for the case of D’ < 0 (as is the case for the azobenzene polymers to be discussed later on), from symmetry considerations we can conclude that d0 ¼ 0, i.e., the peak of the topographical grating coincides with the horizontal polarization of the total write field.
3.10.6 Calculation of Dw and Du from detected intensities In the case of the pump beams polarized along 45 , we get the following expression: pffiffiffiffiffiffiffiffiffiffiffiffiffi pffiffiffiffiffiffiffiffiffiffiffiffiffi rffiffiffiffiffiffiffi rffiffiffiffiffiffiffi IVV =I0 IHH =I0 IVV IHH ; ð3:214Þ þ ; Dw ¼ jD’j ¼ I0 I0 J0 ðD’Þ where we have treated D’ up to 2nd order and Dw up to 1st order. For the case of horizontally and vertically polarized pump beams, one could measure the 1st-order diffracted light along 45 using horizontal input polarization. The equations for intensities in this case have the form 1 Iþ45 ¼ J12 ðD’ÞI0 ; 2
ð3:215Þ
1 I45 ¼ J12 ðD’ÞI0 ; 2
ð3:216Þ
rffiffiffiffiffiffiffiffi rffiffiffiffiffiffiffiffi pffiffiffi I45 pffiffiffi Iþ45 ¼2 2 : jD’j ¼ 2 2 I0 I0
ð3:217Þ
It must be stressed that the above expressions have been derived for the case in which the phase shift due to the surface relief is much smaller than that due to
84
Theory of polarization holography
anisotropy. This is true for most of the liquid-crystalline polyesters. Lagugne´Labarthet et al. [28–30] have developed more accurate formulae for the general case where the phase shift due to surface relief is more important. An improved holographic method to separate the contributions of the anisotropic and topographic parts to the diffraction efficiency through just a single measurement has been presented by Helgert et al. [31]. This method relies on the fabrication of a polarization grating that is accompanied by relief formation with two beams orthogonally polarized along 45 with respect to the grating vector (x axis) which intersect the plane of the sample, and a read-out of the grating with a circularly polarized beam. 3.11 Evanescent-wave polarization holography Holography with evanescent waves was first proposed and demonstrated by Stetson [32]. Nassenstein [33, 34] and Bryngdahl [35] extended the concepts pertaining to evanescent-wave holography. In more recent times, Sainov et al. [36] have demonstrated high-spatial-frequency evanescent-wave holographic recording in polymeric thin films. A diffraction efficiency of 0.015% was achieved in a photopolymer as a recording medium at a spatial frequency of 6380 lines/mm. Holograms in PMMA films containing methyl-red have been reported by Sainov et al. [37]. A diffraction efficiency of 0.16% at a spatial frequency of 2369 lines/mm has been reported. However, permanent two-evanescent-wave holographic recording in azobenzene polymers has not been successful. The electric field of a plane-polarized evanescent wave [3.35] propagating along the x direction is 2pns z 2px exp i ; ð3:218Þ Ex ¼ A exp ka kf where A is the amplitude of the wave, ns is the refractive index of the medium from which the light wave is incident on the interface, and ka is given by ka ¼
k0 ðn2s sin i n2f Þ1=2 2
:
ð3:219Þ
In equation (3.219), k0 is the wavelength of the recording beam in vacuum, i is the angle of incidence at the interface, and nf is the refractive index of the film in which the grating is recorded. ka is a measure of the penetration depth of the evanescent wave into the film. The amplitude of the wave will be attenuated to 1/e of its value at the interface at a distance of ka/(2p). kf in equation (3.218) is the wavelength of the evanescent wave, which is given by
References
kf ¼
k0 ; ns sin i
85
ð3:220Þ
and thus does not depend on the refractive index of the film. When two counterpropagating waves of equal amplitude and wavelength are incident at the interface and propagate as evanescent waves in the film, the period of the interference pattern is given by d¼
kf ; 2
ð3:221Þ
According to Bryngdahl [35], interference is possible when the two waves have a common polarization component. In the case of polarization holography with evanescent waves, let us consider the case of orthogonally circularly polarized write beams. The two beams overlap along a direction parallel to the interface between the media with a phase difference d ¼2px/kf. Let the two beams be represented by 1 1 EA ¼ pffiffiffi expðidÞ; 2 i
1 1 EB ¼ pffiffiffi expðidÞ: 2 i
ð3:222Þ
pffiffiffi cosðdÞ ; 2 sinðdÞ
ð3:223Þ
The resulting total field is ET ¼ EA þ EB ¼
which is linearly polarized along the direction given by cosðdÞ : sinðdÞ If the film contains anisotropic photoresponsive molecules, such as azobenzene, a reorientation of the molecules will occur along the direction of propagation, resulting in a birefringence in the propagation direction. This grating can then be interrogated by a homogeneous or evanescent read-out beam, resulting in diffraction. The diffraction efficiency will be dependent on the polarization of the read-out beam. References 1. D. Gabor. A new microscopic principle. Nature 161 (1948) 777–778. 2. Yu. N. Denisyuk. Photographic reconstruction of the optical properties of an object in its own scattered radiation field. Sov. Phys. Dokl. 7 (1962) 543–545.
86
Theory of polarization holography
3. R. J. Collier, C. B. Burckhardt, and L. H. Lin. Optical Holography. London: Academic Press (1971), p. 224. 4. P. Yeh. Optical Waves in Layered Media. New York: John Wiley & Sons (1991). 5. Sh. D. Kakichashvili. On polarization recording of holograms. Opt. Spectrosc. 33 (1972) 324–327. 6. Sh. D. Kakichashvili. A method of phase polarization holographic recording. Kvant. Elektr. 1 (1974) 1435–1441. 7. Sh. D. Kakichashvili. Polyarizatsionnaya golografiya. Leningrad: Nauka (1989). 8. H. J. Eichler, P. Gu¨nter, and D. W. Pohl. Laser-induced Dynamic Gratings. Berlin: Springer-Verlag (1985), pp. 13–21. 9. N. K. Viswanathan, S. Balasubramanian, L. Li, S. K. Tripathy, and J. Kumar. A detailed investigation of the polarization-dependent surface-relief-grating formation process on azo polymer films. Jap. J. Appl. Phys. 38 (1999) 5928–5937. ¨ ber einen neuen Effekt der Strahlung in lichtempfindlichen Schichten. 10. F. Weigert. U Verh. Deutsch. Phys. Ges. 21 (1919) 479–483. 11. T. Huang and K. H. Wagner. Coupled mode analysis of polarization volume hologram. IEEE J. Quant. Electron. 31 (1995) 372–390. 12. L. Nikolova, T. Todorov, N. Tomova, and V. Dragostinova. Polarization-preserving wavefront reversal in photoanisotropic materials. Appl. Opt. 27 (1988) 1598–1602. 13. L. Nikolova and T. Todorov. Diffraction efficiency and selectivity of polarization holographic recording. Opt. Acta 31 (1984) 579–588. 14. T. Todorov, L. Nikolova, N. Tomova, and V. Dragostinova. Polarization holography for measuring photoinduced optical anisotropy. Appl. Phys. B 32 (1983) 93–95. 15. Sh. D. Kakichashvili. On the problem of the reference wave in polarization holography. JETP Lett. 6 (1980) 6–9. 16. L. Nikolova, Ts. Petrova, M. Ivanov, T. Todorov, and E. Nacheva. Polarization holographic gratings. Diffraction efficiency of amplitude-phase gratings and their realization in AgCl emulsions. J. Mod. Opt. 39 (1992) 1953–1963. 17. H. Kogelnik. Coupled wave theory for thick hologram gratings. Bell Syst. Techn. J. 48 (1969) 2909–2947. 18. T. Huang and K. H. Wagner. Holographic diffraction in photoanisotropic organic materials. J. Opt. Soc. Am. A 10 (1992) 306–315. 19. T. Huang. Physics and applications of photoanisotropic organic volume holograms. Unpublished Ph.D. Thesis, University of Colorado (1993). 20. T. Todorov, L. Nikolova, and N. Tomova. Polarization holography. 1: a new highefficiency organic material with reversible photoinduced birefringence. Appl. Opt. 23 (1984) 4309–4312. 21. T. Todorov, L. Nikolova, N. Tomova, and V. Dragostinova. Photoinduced anisotropy in rigid dye solutions for transient polarization holography. IEEE J. Quant. Electron. 22 (1986) 1262–1267. 22. L. Nikolova and P. Sharlandjiev. Holographic reflection gratings in photoanisotropic materials. Proc. SPIE 1183 (1990) 260–267. 23. L. Nikolova, T. Todorov, M. Ivanov et al. Polarization holographic gratings in sidechain azobenzene polyesters with linear and circular anisotropy. Appl. Opt. 35 (1996) 3835–3840. 24. L. Nikolova, L. Nedelchev, T. Todorov et al. Self-induced polarization rotation in azobenzene-containing polymers. Appl. Phys. Lett. 77 (2000) 657–659. 25. N. C. R. Holme. Photoinduced anisotropy, holographic gratings and near field optical microscopy in side-chain azobenzene polyesters. Unpublished Ph.D. Thesis, Risø National Laboratory, Roskilde (1997).
References
87
26. N. C. R. Holme, L. Nikolova, P. S. Ramanujam, and S. Hvilsted.An analysis of the anisotropic and topographic gratings in a side-chain liquid crystalline azobenzene polyester. Appl. Phys. Lett. 70 (1997) 1518–1520. 27. N. C. R. Holme, L. Nikolova, S. Hvilsted, and P. S. Ramanujam. Polarization holographic and surface relief gratings in optically anisotropic materials. Rec. Res. Develop. Appl. Phys. 2 (1999) 177–192. 28. F. Lagugne´ Labarthet, T. Buffeteau, and C. Sourisseau. Analyses of the diffraction efficiencies, birefringence, and surface relief gratings on azobenzene-containing polymer films. J. Phys. Chem. B 102 (1998) 2654–2662. 29. F. Lagugne´ Labarthet, T. Buffeteau, and C. Sourisseau. Molecular orientations in azopolymer holographic diffraction gratings as studied by Raman confocal microspectroscopy, J. Phys. Chem. B 102 (1998) 5754–5765. 30. F. Lagugne´ Labarthet, T. Buffeteau and C. Sourisseau. Azopolymer holographic diffraction gratings: time dependent analyses of the diffraction efficiency, birefringence, and surface modulation induced by two linearly polarized interfering beams. J. Phys. Chem. B 103 (1999) 6690–6699. 31. M. Helgert, B. Fleck, L. Wenke, S. Hvilsted, and P. S. Ramanujam. An improved method for separating the kinetics of anisotropic and topographic gratings in sidechain azobenzene polyesters. Appl. Phys. B 70 (2000) 803–807. 32. K. A. Stetson. Holography with total internally reflected light. Appl. Phys. Lett. 11 (1967) 225–226. 33. H. Nassenstein. Interference, diffraction and holography with surface waves (subwaves) 1. Optik 29 (1969) 597. 34. H. Nassenstein. Interference, diffraction and holography with surface waves (subwaves) 2. Optik 30 (1969) 44. 35. O. Bryngdahl. Evanescent waves in optical imaging Progress in Optics, E. Wolf, ed., Amsterdam: North-Holland (1973), Vol. 11, p. 167. 36. S. Sainov, A. Espanet, C. Ecoffet, and D.-J. Lougnot. High spatial frequency evanescent wave holographic recording in photopolymers. J. Opt. A: Pure Appl. Opt. 5 (2003) 142–144. 37. S. Sainov, N. Tomova, V. Dragostinova, and E. Ivakin. Real-time evanescent wave holograms. J. Mod. Opt. 35 (1988) 155–157.
4 Azobenzene and azobenzene-containing polymers
In order to record polarization holograms, we need materials that respond to the polarization of light. Azobenzene occupies a special position among materials for polarization-holographic storage. There are several contributing factors to this. First, azobenzene in the stable trans form is almost planar, with one dimension being much longer than the other (anisotropic). Azobenzene possesses a transition dipole moment, and absorbs in the visible and UV [1]. When azobenzene is irradiated with linearly polarized light, the probability of
2
~ l is the transition absorption of the photon is proportional to ~ l E , where ~ ~ dipole moment and E is the electric field vector of the incident light, and thus is proportional to cos2 h, where h is the angle between the transition dipole moment and the electric field vector (see section 3.5). On excitation at the appropriate wavelength (between 420 and 550 nm), the trans form is isomerized to the cis form as shown in figure 4.1, and since the trans and cis transition wavelengths overlap as shown in figure 4.2, the cis form can be optically pumped back to the trans state. However, the molecule (figure 4.3) need not return to the same spatial orientation as before excitation. As long as the angle between the transition dipole moment and the electric field vector is not 90 , the molecule can be cycled between the trans and cis states, until it ends up perpendicular to the polarization of light. This results in a redistribution of the molecules, recording the state of the polarization. Since molecules are reoriented, a fast axis is created parallel to the polarization and a slow axis perpendicular to it, causing birefringence in the material. Thus there are three interesting features associated with azobenzene: (1) the presence of a transition dipole moment, (2) trans–cis isomerization, and (3) the location of the np* and pp* energy levels that permit an optical pumping between the trans and cis states [2]. Several of the azobenzene dyes have been incorporated into a polymer matrix that displays light-induced anisotropy. In this chapter, we shall examine azobenzene dyes in polymer matrices, as well as polymers with azobenzene chromophores attached covalently, for polarization holography. 88
Azobenzene and azobenzene-containing polymers
N
N
N Trans
N
Cis
N
Trans state
N Polarization direction of recording beam
R Light illumination
Cis state
N N
R
N
Trans state N
R
Fig. 4.1 Trans–cis–trans isomerization in polymer-bound azobenzenes. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
89
90
Azobenzene and azobenzene-containing polymers 1.4
absorbance
1.2
trans
1.0 0.8 0.6 0.4
cis
0.2 0.0 200
300
400
500
600
wavelength (nm)
Fig. 4.2 A typical UV–visble absorption spectrum of polymer-bound azobenzene in the trans and cis states. (From T. G. Pedersen, P. S. Ramanujam, P. M. Johansen, and S. Hvilsted. Quantum theory and experimental studies of absorption spectra and photoisomerization of azobenzene polymers, J. Opt. Soc. Am. B, 15 (1995) 2721–2730.) Reproduced with permission from the Optical Society of America. O
O CH2O
CH2
C
CH
C
O
(CH2O)6 O
g 43 SmA 94 N 104 I N N
CN
Fig. 4.3 A side-chain azobenzene polyester. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
4.1 Guest–host systems In 1957 Teitel noticed that, when films containing congo-red and benzopurine were irradiated with polarized light, they became dichroic [3]. Albrecht [4] later that year suggested that light may be able to orient molecules, through rotational diffusion associated with local heating. Later, systematic investigations were
4.2 Azobenzene polymers
91
carried out by Neporent and Stolbova [5]. They found that a film made from an aqueous solution of congo-red irradiated with polarized light at 546 nm from a mercury lamp became dichroic. The absorption of light polarized in the same direction as the exciting light decreased and the absorption perpendicular to the polarization of the exciting light increased, indicating that an orientation of molecules was taking place. The summed optical density in directions parallel and perpendicular to the direction of polarization remained constant. They also discovered that irradiating with polarized light of wavelength between 300 and 400 nm induced a dichroism that was opposite. Several studies of this phenomenon were conducted with congo-red in glycerine and polyvinyl alcohol matrices [6–8]. Makushenko et al. [9–12] put forward the idea that the dichroism may be due to the trans–cis–trans isomerization of the azobenzene molecule and the associated transition dipole moments. As discussed later on, most of the initial work on azobenzene has been done on guest–host systems, in which an azobenzene dye is incorporated into an optically inert polymer matrix. 4.2 Azobenzene polymers One of the major drawbacks of the guest–host systems is that the induced photoanisotropy and, consequently, any fabricated polarization grating are not stable in time. Because of the large amount of free volume available for back-isomerization, the azobenzene molecules rapidly reorient randomly, and the photoanisotropy is lost. An elegant way of getting around this problem was found by Wendorff’s group at the Institut fu¨r Organische Chemie in Mainz. Azobenzene was attached as a side chain in a polyester architecture. It was found that, on irradiation, azobenzene was locked into the oriented position. Initially, liquid-crystalline sidechain polymers were fabricated and used to store optical data by local laser heating of a preoriented film [13, 14]. Eich et al. attached azobenzene mesogenic units as side chains in the polymer [15, 16]. The films were preoriented, and a single linearly polarized laser beam could store phase images of objects. Holographic storage properties were also investigated using a plane wave and a spherical wave. Gratings with an efficiency of up to 4% and high spatial resolution were obtained. The polymer was aligned in an electric field above its Tg and irradiated at 514 nm. Heating the sample above its clearing point caused erasure. Side-chain liquid-crystalline polymers with acrylate backbones were employed by Eich and Wendorff [17]. These polymers have a nematic-to-isotropic phase transition at 103 C and a glass transition at a temperature of 30 C. The polymer was filled into an optical cell consisting of polyimide-coated and rubbed surfaces, so as to orient the polymer. With an incident intensity of 1 mW/cm2, a diffraction efficiency of 50% and spatial resolution of 3000 lines/mm were achieved. They
92
Azobenzene and azobenzene-containing polymers
showed that the holograms could be erased by heating the film to a temperature above the glass-transition temperature. Using monodomains of liquid-crystalline polymers with acrylate and polyestertype backbones with cyanoazobenzene chromophores, Eich and Wendorff [18] recorded diffraction gratings in the glassy state of the polymers. However, only intensity (absorption) gratings were recorded with a spatial frequency of 3000 lines/mm. They note that no significant temperature variations resulting from absorption were observed. Remarkably, they found that the recorded gratings were stable over a period of time. The photoinduced orientation of azobenzene was found to be frozen in the glassy state. Light-induced anisotropy has been observed in several types of polymer systems: comb-shaped liquid-crystalline copolymers [19], azogels [20], azobenzene based methacrylic copolymers [21], liquid-crystalline side-group polymers [22], and azobenzene–polyimide [23]. As mentioned above, several side-chain and main-chain polymers containing azobenzene have been shown to exhibit stable photoinduced anisotropy. In the following, we shall review our own work on side-chain azobenzene polyesters. 4.2.1 Liquid-crystalline side-chain polyesters Side-chain liquid-crystalline polyesters provide a unique possibility of combining the functionality of conventional low-molar-mass liquid crystals with the properties of macromolecules. This is mainly possible due to the linking of the different mesogenic groups to the polymer main chain through flexible alkyl spacers of varying length. Their characteristic attributes include the requirement of very low recording power, the possibility of complete erasure of information, long storage times, high resolution and high efficiency. Many write–erase cycles can be accomplished with little or no fatigue. These polyesters are prepared by melt transesterification of diphenyl tetradecanedioate and a series of mesogenic 2-[x-[(4-cyanophenyl)azo]phenoxyalkyl]-1,3-propanediols, where the alkyl is hexamethylene, octamethylene, or decamethylene. This type of architecture offers extended flexibility in main-chain tailoring due to possible interchange of both the acidic and the glycol part, both of which, in turn, can provide the linking site for the mesogen. One advantage of this particular architecture is its modular construction: the four parameters involved, viz., the length of the acidic part of the main chain, the length of the flexible side-chain spacers, the substituents on the azobenzene, and the molar mass, can be varied individually, allowing systematic study of the influence of the four parameters on the optical storage properties. All four of the parameters have significant influence on optical storage properties [24]. Experiments showed that reversible optical storage based on
4.2 Azobenzene polymers
93
tetradecanedioate polyesters could be used permanently, yet erasable storage can be obtained at high resolution. Gratings written in this material have been stable for more than 15 years under ambient conditions. A variation of the main-chain spacer length to the much shorter adipate provided an interesting biphotonic character [25, 26]. The notation used to describe our polyesters is as follows: a polyester characterized by 6 methylene groups in the side chain, a cyanoazobenzne chromophore, and 12 methylene groups in the acidic part of the main chain will be known as P6a12. In this notation P stands for the propanediol, and E for ethanediol. 4.2.2 Amorphous side-chain polyesters The liquid-crystalline polyesters described display some remarkable properties, with respect to the stability of the induced anisotropy. Most of them have a glasstransition temperature around 30 C, indicating the presence of amorphous regions in the film. However, the induced anisotropy is stable until the clearing temperature of the mesogenic domains is reached. However, because of the presence of mesogenic domains with sizes ranging between 0.5 and 2 mm, there is an unacceptable amount of light scattering [27]. For practical applications in the area of holographic optical storage for which a bit-map is recorded, this means that adjacent pixels receive a considerable amount of “noise”, eventually decreasing the overall signal-to-noise ratio. One way to avoid this background scattering is through the synthesis of amorphous polymers. By making the side chains and the main chain more rigid, the azobenzene dipoles are prevented from interacting with each other, preventing the formation of domains. The synthetic pathway leading to the preparation [28] of a variety of novel amorphous polyesters, E1aX (figure 4.4), comprising pendant cyano-substituted azobenzene chromophoric side chains whose absorption spectra are shown in figure 4.5 is outlined in figure 4.6. The notation E1aX is generic, where “E1a” specifies the nature of the cyano-substituted azobenzene “diol”, i.e., 4-[4-(2,3-dihydroxypropoxy)phenylazo]-benzonitrile, and “X” refers to the nature of the “diacid” in the polyester main chain. Seventeen different “diacids” were employed (structures shown in figure 4.6), which are conveniently divided into four classes: onering aromatic systems (X ¼ P, PMe, 2,3-Pyr, I, t-BuI, T, S, and TOMe); two-ring aromatic systems (X ¼ 1,4-N, N, Diph, Biph, 3,4-Biph, and 8FBiph); three-ring aromatic systems (X ¼ 4FTriph2Oc); and alicyclic systems (X ¼ A and C). For synthesis and characterization of E1aX-type polyesters, readers are referred to [28] The polyester E1aBiph synthesized as described [28] exhibits stable anisotropy up to 160 C.
94
Azobenzene and azobenzene-containing polymers O
O O
O
O
n
O
O n
O O
O
E1a12
E1aP N (E ) N
N (E ) N
CN
CN
Fig. 4.4 Chemical structures of E1a12 and E1aP. (From L. Nedelchev, L. Nikolova, A. Matharu, and P. S. Ramanujam. Photoinduced macroscopic chiral structures in a series of azobenzene copolyesters, Appl. Phys. B, 75 (2002) 671–676.) Reproduced with permission of Springer Science þ Business Media.
0.9 0.8
a
Absorbance, OD
0.7 0.6 0.5
b
0.4 0.3 0.2 0.1 0.0 300
400
500
600
700
Wavelength, nm
Fig. 4.5 Absorption spectra of solutions of E1aP (a) and E1aBiph (b) in THF. (From L. Nedelchev, A. S. Matharu, S. Hvilsted, and P. S. Ramanujam. Photoinduced anisotropy in a family of amorphous azobenzene polyesters for optical storage. Appl. Opt. 42 (2003) 5918–5927.) Reproduced with permission from the Optical Society of America.
4.3 Azobenzene peptides x CO2H HO2C 'dicarboxylic acid'
COCI x CIOC 'dicarbonyl dichloride'
i
ii
iii HO
95
x CO2Ph PhO2C 'diphenyl diester'
OH
O
N N
iv
CN (E1a)
O
F
O
O O
X
n
(P)
where X =
F
O
(4FTriph2Oc) C8H17
F
F
(N)
(PMe) N
C8H17
(1,4-N)
Me N
CN Azopolyester E1aX
N (2,3-Pyr)
(Diph)
(1)
(Biph)
(t-Bul)
(3,4-Biph)
(A) (C) F
FF
F (8FBiph)
(T) (TOMe)
F
FF
F
OMe S (S)
Fig. 4.6 The generalized synthetic pathway for azopolyesters E1aX. (From L. Nedelchev, A. S. Matharu, S. Hvilsted, and P. S. Ramanujam. Photoinduced anisotropy in a family of amorphous azobenzene polyesters for optical storage. Appl. Opt. 42 (2003) 5918–5927.) Reproduced with permission from the Optical Society of America.
4.3 Azobenzene peptides An interesting variant of the backbone for azobenzene oligomers consists of amino acids [29]. The rationale for this approach was to use the structural properties of peptide-like molecules to impose orientational order on the chromophores and thereby optimize the optical properties of recording films. Diamino acid-Na-substituted oligopeptides (DNOs) (figure 4.7) in which azobenzene side
96
Azobenzene and azobenzene-containing polymers DNO O
H2N
DNA
PNA O
H N
Azo
HO
H2N
Base
O
N
O O H N
Base
n
H N
–O
Azo
O
O
O P
O
O
Base
n
O
OH
Azo =
O
H N
O Base n
H N
O
N N
C N
Fig. 4.7 Diamino acid-N2-substituted azobenzene oligopeptides (Base denotes a nucleobase, e.g., thymine, adenine guanine or cytosine). Reprinted by permission from Macmillan Publishers Ltd: [Nature] (R. H. Berg, S. Hvilsted and P. S. Ramanujam, “Peptide oligomers for holographic data storage” 383 (1996) 505–508), copyright (1996).
chains were linked to a peptide-like backbone were designed. This backbone was expected to impose helical stacking of the azobenzenes in a manner similar to that found for the bases in DNA or PNA [30]. The backbone consisted of all-L ornithine units oligomerized through the d-amino groups and with the side chains attached to the a-amino groups by carbonyl linker. Glycine was chosen as the N-terminal backbone unit, and a dipolar cyanoazobenzene derivative was chosen as the chromophore. Films of good quality with a thickness of approximately 5 mm were obtained from hexafluoroisopropanolic solutions. Light of wavelength 488 nm at a total intensity of 2 W/cm2 was used as the writing beam, and a 4-mW circularly polarized HeNe laser beam was used for the read-out. A first-order diffraction efficiency of 76% was reached in about 300 s. Diffraction gratings written in DNO oligomers have been stable at room temperature for several years. Proline-based DNOs (figure 4.8) produced a diffraction efficiency of up to 80% within hundreds of milliseconds [31]. The advantage of this system is that it was found to be soluble in common organic solvents and can be assembled by solution-phase synthesis. 4.4 Azobenzene side-chain polymethacrylates Methacrylate systems containing azobenzene have been investigated in great detail by Natansohn and her group [32]. They have also investigated the
4.4 Azobenzene side-chain polymethacrylates
97
O H2N
Azo N CH3 O
O
Azo
HN N O
Fig. 4.8 A proline-based azobenzene oligopeptide. (From P. H. Rasmussen, Pseudopeptide structures for reversible holographic storage and combinatorial applications, Ph.D. Thesis, Risø National Laboratory, Roskilde, Denmark (1999).)
O : C 9C 9
:
:
H3C
O 9 (CH2)m 9O
N :
H2C
N
MC6 MC8
H2C
C 9C
m=6 m=8
O :
9
:
9
H3C
CN
O
MnMA
Fig. 4.9 Methacrylate-based azobenzene polymers with chiral monomers. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
interaction between the side chains when the polymethacrylate contained both azobenzene and polar or nonpolar side chains. As will be discussed in section 4.6, it was shown that a higher birefringence is obtained when the side chains are polar due to a cooperative motion of the azobenzenes. The effect of the introduction of an optically active comonomer into a methacrylate polymer containing azo groups has been investigated by Andruzzi et al. [33].
98
Azobenzene and azobenzene-containing polymers
Two series of methacrylic polymers based on the mesogenic photochromic monomers 6-(4-oxy-40 -cyanoazobenzene)hex-1-yl-methacrylate (MC6) and 8-(4-oxy-40 -cyanoazobenzene)hex-1-yl-methacrylate (MC8) and an optically active comonomer, ()-menthyl methacrylate (MnMA) have been investigated (figure 4.9). It was found that, for both series, the higher the content of dye in the polymer, the higher the value of the maximum diffraction efficiency achieved. Maximum diffraction efficiencies on the order of 50% were achieved. The polymethacrylates with the hexamethylene spacer seem to possess a shorter rise time and a higher value of diffraction efficiency than do the polymethacrylates with the octamethylene spacer. 4.5 Azobenzene dendrimers The effects of the accumulation of a large number of azobenzene units on the photochemical properties were examined by Archut et al. [34]. Dendrimers bearing up to 32 azobenzene groups in the periphery were prepared from poly (propylene) imine dendrimers and N-hydroxysuccinimide esters (figure 4.10).
Fig. 4.10 An azobenzene dendrimer. (From A. Archut, F. Vo¨gtele, L. De Cola, G. C. Azzelini, V. Balzani, P. S. Ramanujam and R. Berg. Azobenzenefunctionalized cascade molecules: Photoswitchable supramolecular systems, Chem. Eur. J. 4 (1998) 699–706.) Copyright Wiley-VCH Verlag GmbH & Co, KgaA. Reproduced with permission.
4.6 Photoaddressable polymers
99
The dendritic azobenzene species exhibited similar properties to the corresponding azobenzene monomers. It was found that the photoisomerization quantum yield of each photoactive unit was not dependent on the number of such units present in the species, showing that there is no effective steric constraint towards photoisomerism on increasing dimension (generation) of the dendrimer. Polarization-holographic gratings with efficiencies of up to 20% were optically recorded in thin films of azobenzene dendrimers. He et al. [35] recently reported a series of dendritic azobenzene-containing compounds that exhibit the ability to undergo surface-relief-grating formation quickly. Spin-coated films of these compounds were exposed to modest-intensity (100 mW/cm2) p-polarized beams, producing an interference pattern. The increase of the diffraction efficiency of the surface relief grating with irradiation was found to be saturated in less than 300 s of irradiation. These compounds display a stable amorphous glass structure over a broad temperature range. The glass-transition temperature depends on the backbone structures and the type of the peripheral azo chromophores. Diffraction efficiencies on the order of 25% were achieved. Hyperbranched azopolymers have also been prepared and investigated for surface-relief-formation properties [36, 37]. 4.6 Photoaddressable polymers A strong cooperative photo-orientational process has been found to take place in side-chain copolymers with azobenzene as one of the components by Natansohn et al. [32]. This is the key idea for the fabrication of photoaddressable polymers (PAPs) by the Bayer group [38, 39]. Photoaddressable polymers are amorphous or liquid-crystalline side-chain copolymers functionalized with azobenzene chromophores and mesogenic side groups, which may also be photoactive. Owing to dipole interactions, mesogenic groups undergo cooperative orientation, enabling a higher birefringence and stability. Zilker et al. [39] have investigated extensively the concept of a photoactive chromophore and cooperative mesogenic unit. They have investigated two polymer systems denoted CP1 and K1, shown in figure 4.11. In the CP1 system, there is a photoactive chromophore and non-photoactive mesogen; in the K1 system, both the chromophore and the mesogen are based on azobenzene. In the K1 system, donor–acceptor substitutions lead to an increase of the dipole interaction between azobenzene and mesogen groups. The greater photoanisotropy in the K1 system is due to the large molecular polarizabilities of both the side chains as well as the greater dipolar contributions.
100
Azobenzene and azobenzene-containing polymers CP1–50 G 88 N 175 I
K1–40 G 143 I
CH3
CH3
C
C CH2
O
CH2
0.5 O
O
(CH2)2 N–CH3
N N
O
CH3 C
0.5 O
CH3 CH2
C CH2
0.4
O
O
O
(CH2)6
(CH2)2
(CH2)2
O
N–CH3
O
O
O
N
HN
N
0.6
O
CN
CH3 Photoactive chromophore
CN
OCH3
Mesogenic unit
N N
Photoactive chromophore
CN
CN Mesogenic unit and photoactive unit
Fig. 4.11 An illustration of CP1–50 and K1–40 structural assemblies. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
The dipole moment of K1 is approximately two to three times greater than that of CP1. In the less-polar CP1 polymer system, steric forces are assumed to be the driving force for reorientation of the mesogenic units. It is believed that the speed and maximum photoinduced birefringence are limited in CP1-50-type polymers because the reorientation of the chromophore and of the mesogen occurs sequentially. This is reflected in the holographic growth, in the relaxation dynamics, and also in the thermal-gain effect. The thermal gain is due to an increase of the free volume available to the mesogens and hence their increasing thermal movements at higher temperatures leading to a collective orientation of the side chains along the direction which is given by those groups that were prealigned for the recording laser. Polymers that do not have a liquid-crystalline phase do not seem to exhibit this gain effect.
4.6 Photoaddressable polymers
101
n
O
O(CH2)mO
N
N
OCH2CH3
m = 6: G 47 N 220 I 9: G 39 N 212 I 12: G 34 N 229 I
Fig. 4.12 Structures of tolane mesogenic units. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
In the case of a homopolymer comprising 100% mesogenic groups, the photoinduced birefringence is rather low (Dn ¼ 0.10). Similarly, for a homopolymer comprising only chromophore units, the photoinduced birefringence is also low (Dn ¼ 0.11). However, for a system such as K1 comprising both a chromophore and a mesogen working in a cooperative manner, high birefringence values (Dn ¼ 0.23) result. Small-angle X-ray scattering reveals the formation of small domains consisting of supermolecular aggregates with a high degree of orientational order, as was also the case with liquid-crystalline polyesters. As the illumination time is increased, the degree of ordering increases, while the domain size remains constant. Thus scattering is due to reordering, not to density fluctuations as in guest–host systems, where diffusion processes are dominant. Tolanes as mesogenic units (figure 4.12) have been used to enhance the diffraction efficiency (g) and the modulation of the refractive index (Dn). Yoneyama et al. [40] prepared materials comprising tolane mesogenic units, which are known to exhibit high birefringence with photoresponsive azobenzene groups. These photoaddressable polymers exhibit an induced birefringence on the order of 0.35. One of the problems of PAPs for high-capacity volumetric storage is their difficulty to form thick films in the absence of diluents. Thick films cannot be simply fabricated by increasing the concentration of chromophore since the resultant high optical density would limit light penetration. Furthermore, scattering noise from the film will be large. The maximum thickness of a homopolymer film should be approximately 4/absorptivity, or about 320 nm. Thicker films will completely absorb the incoming light beam. Many attempts have been made to fabricate thick films of low optical density, relying on a strategy that embeds the PAP in an inert matrix or diluent, with only moderate success. Fabrication of block copolymers is one way to control the optical density in thick films. The block copolymers contain azobenzene side chains in one block (minority) combined with a block of mesogen material (majority) (figure 4.13).
102
Azobenzene and azobenzene-containing polymers
H block 528
CO
CO O
O
O
O
O
OH
O
C (CH2)3
Majority
O
x = 0.24 y = 0.35 z = 0.41
N
40
O
O O
Polystyrene
z
y
x
O (CH2)3 O
CO2
N
OCH3
OCH3 polyHEMA Minority
Fig. 4.13 Block copolymer architecture for thick-film fabrication. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
When there is less than 15% of the chromophoric segment, the block copolymers form spherical microphases of diameter 10–20 nm. The chromophores become confined in a narrow environment, aiding stability of the inscribed grating and minimizing surface-relief-grating formation. However, these polymers have been found to require long recording times. Saishoji et al. [41] recently demonstrated the possibility of multiple-data storage simultaneously utilizing polarization and angular selectivity by reporting holographic multiple-data storage of 55 holograms using angular multiplexing in an optically transparent, 200-mm-thick, methacrylate copolymer comprising donor–acceptor-type azobenzene and mesogenic cyanobiphenyl moieties
4.6 Photoaddressable polymers
103
Fig. 4.14 Methacrylate copolymer. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
(figure 4.14). The polymer is amorphous and the mesogenic groups undergo cooperative movement. 4.6.1 Surface relief For most azobenzene polymers, it has been found that surface relief provides an enhanced stability to the diffraction grating. In fact, in the case of a DNO peptide discussed in section 4.3, the gratings have been found to survive 250 C for more than a month. Even though the films are completely discolored, becoming almost black, the grating still exists. However, in the case of optical storage of information, in which a bit-map consisting of pixels from a spatial light modulator is recorded as a hologram, a large surface relief tends to contribute additional noise to adjacent pixel images on the CCD detector. Thus, for practical reasons, considerable efforts are made to suppress the surface relief. You et al. [42] have shown that SRG formation and suppression may be controlled using semi-fluorinated azobenzene polymers. Semi-fluorinated azobenzene liquid-crystalline side-chain polymers, with fluorinated side chains of sufficient length, can completely suppress SRG formation due to a self-assembled liquid crystalline order at the surface, as shown in figure 4.15. You et al. [42] fabricated polymers with perfluorohexyl (n ¼ 6) and perfluorooctyl chains (n ¼ 8). The perfluorohexyl azopolymer exhibited strong SRG formation, whereas, no SRG was formed in the perfluorooctyl azopolymer, as shown by AFM. However, the perfluorooctyl azopolymer did diffract the reading laser beam, implying reorientation of the chromophores and photoinduced birefringence. You et al. [42] postulate that localized liquid-crystalline ordering
104
Azobenzene and azobenzene-containing polymers F3C F F F F F F F F
F F H
random Bu
R
O C
(CH2)5O
F
0.6
0.4
N OR
F F F
F3C F
F 3C F F F F F F F F F F F F F
F F F F F F
F3C F F F F F F F F F F F F F F
F F F F F F F F
OR
N N
(CF2)nF
N
N
N
N
N
N
N
N
O
O
O
O
Fig. 4.15 Molecular structure and surface organization of semi-fluorinated polymers. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
of the perfluoroalkyl chains at the surface hinders the formation of SRGs. The probability of formation of liquid-crystalline assemblies increases with increasing perfluoroalkyl chain length. Hence, SRG formation diminishes as the chain length increases from n ¼ 4 to 6 to 8. There are other applications, in which the presence of a strong surface relief may be beneficial. An example of this is surfaces that provide for molecular alignment, such as liquid crystals. An understanding of holographically induced SRGs has been used to create micropatterned structures. Morikawa et al. [43] have used holographic recording modes (s: s) and (p: p) to engineer macroscopic alignment and micropatterning of nanoscale periodic structures in block copolymer thin films (see figure 4.16). They report having obtained a new threedimensional (both out-of-plane and in-plane) alignment of nanocyclinders of a diblock copolymer comprising liquid-crystalline photoresponsive block chains and poly(ethylene oxide) (PEO) by applying the process of photoinduced mass migration. The copolymer (figure 4.16), after annealing and successive cooling to room temperature, forms hexagonally close-packed PEO cylinders oriented normal to the substrate plane due to its liquid crystallinity. Morikawa et al. [43] have shown that, in films of thickness greater than 70 nm, following annealing at 110 C and
4.6 Photoaddressable polymers
105
O H3C
O
X 67
114 O O
O (CH2)11O
N N
C4H9
SmX 66.9 °C SmC 95.9 °C SmA 119 °C Height, nm 100
(p: p) PEO cylinder
(s: s) 0 parallel
perpendicular
Fig. 4.16 Molecular structure and surface organization of photoresponsive PEO comprising block copolymers. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
subsequent exposure to hexane vapor, H-aggregation is dominant. The azobenzene chromophores align parallel with the PEO cylinders, which are perpendicular with respect to the substrate surface. When they attempted to induce mass migration via irradiation at 488 nm, they observed no SRG. However, on softening the material with 5CB, which also acts as a diluent, efficient surfacerelief formation was detected. Post-treatment effectively removed the 5CB molecules via evaporation, leaving a stable SRG due to mass migration. The direction of the PEO cylinders is dependent upon the holographic recording mode, in which the electric field vectors were either perpendicular (s: s) or parallel (p: p) to the plane of incidence. Yamamoto et al. [44] reported the observation of unique characteristics in phase-type gratings that were formed in a polymer azobenzene liquid-crystal film. Two unpolarized writing beams were used in their study to create SRGs. Comparison of the diffraction efficiency with the surface modulation revealed that the gratings could not be characterized solely as conventional SRGs. In the glassy state of the film, moderate efficiency (approximately 18%) was obtained with large surface modulation (68–76 nm), whereas the gratings recorded in the nematic phase exhibited higher diffraction efficiency (approximately 28%) with slight surface modulation (33–53 nm), leading to the conclusion that the diffraction efficiency was enhanced in the liquid-crystalline state, i.e., the large enhancement of the efficiency was attributable to spatial modulation of the
106
Azobenzene and azobenzene-containing polymers CH3 C
CH2
C
O
O
O(CH2)6 O
n
O
N N
OC2H5
g 68 N 150 I Mw = 79 000; Mw/Mn = 4.4
Fig. 4.17 A polymer azobenzene liquid crystal. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
molecular alignment (refractive index). Comparison of films with a similar modulation (30–35 nm) revealed that those recorded in the nematic phase had diffraction efficiency three times larger than that of films recorded in the glassy state, 21% compared with 7%, respectively. The dynamics of the first-order diffraction beam showed that the grating formation was associated with a photochemical phase transition (nematic–isotropic) of the polymer azobenzene liquid crystal (figure 4.17). Yamamoto et al. [44] proposed that isotropic phases were formed by photochemical reaction of azobenzene moieties in the interference pattern at an appropriate level. This claim was supported by AFM and polarization-microscopic data. The grating was formed by alternate arrangement of isotropic and nematic phases as well as slight modulation of surface structure. 4.7 Photorefractive azobenzene polymers Photorefractivity is a phenomenon in which photosensitive materials exhibit an electric-field-dependent refractive index. If a photorefractive material is irradiated with non-uniform illumination, such as an interference pattern with bright and dark regions, absorption of photons in the illuminated areas will create mobile charge carriers, which diffuse to the non-illuminated darker regions. This creates an electric field pattern that modulates the refractive index through the Pockels effect. The refractive-index grating created by the electric charges and the intensity grating due to interference are phase shifted. This gives rise to a twobeam coupling whereby one of the writing beams gains energy at the expense of the other. To start with, all the photorefractive materials used were crystals such as LiNbO3, BaTiO3 etc. However, it soon became obvious that polymeric materials possess several advantages such as structural flexibility, lower cost and ease of manufacturing. Furthermore, the properties required for photorefractivity, such as photosensitivity, photoconductivity, and electro-optic response, can be
4.8 Polymer photochromic cholesterics
107
designed to reside in different molecular components, unlike in the case of inorganic materials [45]. Meerholz et al. [46] describe a photorefractive polymer, with a diffraction efficiency close to 100%, based on an azobenzene chromophore. The photoconducting medium was polyvinyl carbazole. The increase in photosensitivity was achieved by adding a small amout of 2,4,7-trinitro-9-fluorenone. The electro-optic chromophore was 2,5-dimethyl-4-(p-nitrophenylazo)anisole. A macroscopic electro-optic effect in the material was achieved through electric field poling. The glass-transition temperature of the composite was decreased by adding N-ethylcarbazole. Films with thickness exceeding 100 mm could be fabricated. A very efficient net optical gain of up to 207 cm1 was obtained with twobeam coupling. At an applied field of 90 V/mm, a diffraction efficiency of 95% was achieved within 100 ms. It has been found possible to incorporate organic molecules required for photorefractivity into an inorganic silica network in a sol–gel form [47]. The azobenzene dye was disperse red, DR1, the charge-transporting unit was carbazole, and the sensitizer was 2,4,7-trinitro-9-fluorenone. Intensity gratings for photorefractivity and two-beam coupling were written with ss or pp polarized beams at 488 nm. Polarization gratings were also recorded with sp and rightcircular–left-circular polarized light. A diffraction efficiency of 0.2% was achieved for sp recording in 120 s. 4.8 Polymer photochromic cholesterics In the vast majority of studies on photochromic systems azobenzene derivatives as discussed earlier have been used. An interesting evolving area is polymer photochromic cholesterics as highlighted by Shibaev et al. [48], who discuss the combination of azobenzene with chiral photochromic groups (figure 4.18). They reported optical properties of binary and ternary copolymers comprising various monomer units, each of which plays a certain “functional role”. The methoxyphenylbenzoate groups (a) are expected to induce liquid crystallinity (the nematic phase). The photoresponsive azobenzene moiety (b) will undergo trans–cis photoisomerization leading to photoinduced birefringence, and the chiral photochromic benzylidene-p-menthanone fragment (c) was expected to form the cholesteric phase. The absorption bands of the azobenzene groups lie in the visible and near-UV spectral regions, whereas the absorption bands for the chiral menthanone (c) occur in the UV spectral region. Thus, Shibaev et al. were able to vary the type of process in order to control the optical properties of the polymer such as birefringence or untwisting of the cholesteric helix to record data. For example, UV irradiation (at 313 or 366 nm) induces trans–cis photoisomerization of the menthanone groups, causing the linear trans isomer, which is
108
Azobenzene and azobenzene-containing polymers
Fig. 4.18 Polymer photochromic cholesterics. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
conducive for liquid crystallinity, to alter shape to the non-linear, less conducive, almost bent structure of the cis isomer (see figure 4.19). A significant change in the helical twisting power, b, is observed as a result of helix unwinding, with the pitch tending toward longer wavelengths. Unfortunately, this process is irreversible and the image cannot be rewritten. Alternatively, irradiation at 514 nm probes the np* absorption of the azobenzene moiety, resulting in cis–trans–cis photoisomerization cycles, without affecting the menthanone group. Helix unwinding occurs and a bathochromic shift is detected. In contrast to the UV irradiation, this process is reversible, and heating the sample causes twisting of the helix. Many record–erase cycles can be performed with minimal fatigue or bleaching. 4.9 Experimental techniques – linear anisotropy measurements Before embarking on polarization-holographic measurements, it may be worthwhile to determine the birefringence that can be induced in the material, its stability in time, its stability as a function of temperature, and whether a circular anisotropy is also induced. Furthermore, this may provide a better understanding of how the polymer design parameters (length and stiffness of the main chain, length of the flexible spacer, molar mass, substituent) affect the optical storage properties of the materials and allow one to gain insight into the fundamental processes involved in storage [49].
4.9 Linear anisotropy
109
CH2 CH COO
(CH2)5
COO
OOC
OCH3
y
E isomer CH2 CH COO
(CH2)6
O
O
COO
x
*
* hn
hn mask
mask
CH2 CH COO y
(CH2)5
COO
OOC
OOH3
Z isomer CH2 CH COO x
(CH2)6
O
COO O
* *
Fig. 4.19 Photo-controlled helix unwinding. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
Two different experimental set-ups have been employed for the determination of optical anisotropy. Two lasers, one serving as a pump laser in the blue/green region and the other in the red as a probe laser, are employed. The induced anisotropy at the red laser wavelength (typically a HeNe laser at 633 nm with a power of 3 mW) is detected. In the set-up shown in figure 4.20, the HeNe beam is linearly polarized at 45 to the vertical. After passing through the film, the beam is split by a Wollaston prism into two linearly polarized components, one polarized along 45 and the other along 45 . The intensities of these two beams are measured by two photodetectors. Both laser beams can be turned on and off independently by two mechanical shutters. The film is placed on a Peltier element, which allows control of the film temperature; the film temperature can be set between 5 and 95 C, with an accuracy of about 2 C. Figure 4.21 shows the second optical set-up used in our experiments. The pump laser is an Arþ laser operating at 488 nm, which is within the absorption band of the photochromic azo groups. A laser power of 50 mW corresponding to
110
Azobenzene and azobenzene-containing polymers
Fig. 4.20 A set-up used to measure optically induced anisotropy. (From N. C. R. Holme, P. S. Ramanujam, and S. Hvilsted. Photoinduced anisotropy measurements in liquid-crystalline azobenzene side-chain polyesters. Appl. Opt. 35 (1996) 4622–4627.) Reproduced with permission from the Optical Society of America. Sh M
Ar+ (pump)
Pol
S HS HeNe (probe)
Polarimeter Pol HWP
HL TCB
PC
Fig. 4.21 The scheme of the experimental set-up: Sh, beam shutter; Pol, polarizer; M, mirror; HWP, half-wave plate; S, sample; HS, hot stage; TCB, temperature-control block; HL, halogen lamp; and PC, personal computer. (From L. Nedelchev, A. S. Matharu, S. Hvilsted, and P. S. Ramanujam. Photoinduced anisotropy in a family of amorphous azobenzene polyesters for optical storage, Appl. Opt. 42 (2003) 5918–5927.) Reproduced with permission from the Optical Society of America.
an intensity of approximately 700 mW/cm2 was employed. The light from the Arþ laser is linearly vertically polarized and, to ensure a high degree of linear polarization, a Glan–Thompson polarizer is added after the mirror. A beam linearly polarized at 45 from a HeNe laser (633 nm) was used to probe the induced birefringence. Its polarization after the sample was measured by a polarimeter. 4.9.1 Calculation of induced phase shift from measured data As mentioned in chapter 3, in the case of azobenzene polymers, the dipoles are reoriented when exposed to linearly polarized light. There is a decrease in the refractive index parallel to the polarization of light, and an increase in the orthogonal direction. These changes will be assumed to be equal and opposite. For the first experimental set-up, shown in figure 4.20, the transmission matrix for
4.9 Linear anisotropy
111
the sample in which anisotropy is induced by a vertically polarized argon-ion laser beam with the Jones vector 0 1 can be written as
ei D’ 0
: ei D’ 0
ð4:1Þ
The induced anisotropy is probed by the red light (633 nm) from the HeNe laser, which is outside the absorption band of the material. The photoinduced anisotropic phase 2 D’ is 2 D’ ¼
2p Dn d ; k
ð4:2Þ
where d is the thickness of the sample, Dn is the photoinduced birefringence, and k is the wavelength of the probe beam. The HeNe laser beam polarized along 45 passes through the film and is then split into two components by the Wollaston prism. The first component polarized parallel to the incoming beam, with an intensity I0, can be written as Ik ¼ I0 cos2 ðD’Þ:
ð4:3Þ
The second component polarized perpendicular to the incoming beam can be written as I? ¼ I0 sin2 ðD’Þ:
ð4:4Þ
The induced anisotropy D’ can then be calculated from the intensities of the two beams: sffiffiffiffiffiffiffiffiffiffiffiffiffiffi sffiffiffiffiffiffiffiffiffiffiffiffiffiffi Ik I ? : ð4:5Þ ¼ cos1 jD’j ¼ sin1 I? þ Ik I? þ Ik These measurements are always repeated several times, and the average |D’| from the measurements is calculated. Through separate measurements, we have determined that D’ < 0. In the second experimental set-up, shown in figure 4.21, the Stokes parameters of the exiting HeNe beam are directly measured with a polarimeter. From the measured Stokes parameters, the photoinduced phase shift 2 D’ can be calculated using
112
Azobenzene and azobenzene-containing polymers 0.45 Laser off 0.40 Laser on 30 °C
Phase shift ∆w (rad)
0.35
1000 mW/cm2 800 mW/cm2 600 mW/cm2 400 mW/cm2 200 mW/cm2
0.30 0.25 0.20 20 °C
0.15 0.10 0.05
10 °C
0.00
40 °C 0
50
100
150
200
time (s)
Fig. 4.22 Anisotropy induced in P6a12 polyesters for various sample temperatures and laser intensities. (From N. C. R. Holme, S. Hvilsted, E. Lo¨rincz, A. Matharu, L. Nedelchev, L. Nikolova, and P. S. Ramanujam. Azobenzene polyesters for polarization holographic storage: part I, Handbook of Organic Electronics and Photonics, H. S. Nalwa ed. American Scientific Publishers, USA (2007) 183–211.) Reproduced with permission from the American Scientific Publishers.
S3 : DU ¼ 2 D’ ¼ arctan S2
ð4:6Þ
For all of the polyesters investigated the value of D’ is negative. Birefringence During the first 10 s, only the background is measured to establish a baseline. The argon laser is turned on at 10 s, and is switched off after 90 s. The anisotropy is followed for approximately 200 s. As discussed later, this measurement already gives an indication of the long-term as well as the thermal stability of induced anisotropy. In figure 4.22, the induced anisotropy for various laser intensities and sample temperatures is shown for the polyester type P6a12. From this figure we can see that D’ increases with the intensity of the write beam, but the induced anisotropy does not depend linearly upon the intensity of the write beam. The sample temperature is an important parameter. At 30 C, twice as much anisotropy is induced as at 20 C, and at 40 C hardly any anisotropy is induced.
4.9 Linear anisotropy
113
1.2 P6a10 P6a11 P6a12 (h = 0.74) P6a12 (h = 0.47) P6a12 (h = 0.33) P10a10 P10a12
Normalized anisotropy
1.0
0.8
0.6
0.4
0.2
0.0 20
30
40
50
60
70
80
90
Temperature (°C)
Fig. 4.23 Normalized anisotropy as a function of the temperature of the films, after the anisotropy has been induced at room temperature. (From N. C. R. Holme, S. Hvilsted, E. Lo¨rincz, A. Matharu, L. Nedelchev, L. Nikolova, and P. S. Ramanujam. Azobenzene polyesters for polarization holographic storage: part I, Handbook of Organic Electronics and Photonics, H. S. Nalwa ed. American Scientific Publishers, USA (2007) 183–211.) Reproduced with permission from the American Scientific Publishers.
The induced anisotropy is stable after the argon-ion laser has been switched off. The maximally induced birefringence Dn ¼
2 D’ k ¼ 0:054; 2pd
for D’ ¼ 0.4, k ¼ 0.633 lm, and d ¼ 1.5 lm. Note that Dn is the total birefringence (see equation (4.2)). Temporal behavior of induced anisotropy as a function of sample temperature and laser intensity We have also examined the stability of the induced anisotropy as a function of temperature (figure 4.23). This is an important parameter, since it will determine how stable the induced anisotropy is over long periods of time. For these measurements, anisotropy was induced in various liquid-crystalline polyesters at an optimum temperature that had been determined previously. Then the samples
114
Azobenzene and azobenzene-containing polymers
were heated at a rate of 0.1 C/s, and the anisotropy was recorded. A normalized anisotropy was calculated from these measurements as the ratio of the anisotropy at a given temperature to the maximum anisotropy induced. It is seen that the temperature at which the anisotropy is erased depends on the polyester architecture. The temperature at which the anisotropy is erased was found to increase with the length of both the main chain and the side chain. 4.9.2 Amorphous polyesters Birefringence Nedelchev et al. [28] investigated several parameters associated with optical data storage in a variety of azobenzene-containing amorphous polyesters of the type E1aX as mentioned in section 4.2.2. The results indicated that the long-term stability of the stored birefringence at room temperature was closely related to the thermal stability of the photoinduced birefringence. It was found that even a measurement of the anisotropy decay after as little as 30 min could provide relevant information on the long-term stability of the birefringence. Those polyesters which had a high thermal stability also exhibited very stable birefringence at room temperature. Another influence on the induced birefringence is the effect of ambient light. For most of the polyesters, the induced anisotropy was erased within a few hours on exposure to sunlight. A close correlation between the response time of the polymer and the stability of the photoinduced birefringence toward illumination with unpolarized white light, such as sunlight, was found. Typical birefringence values after irradiation range between 0.02 and 0.15 for the azobenzene polyesters under investigation. In figure 4.24, an example of the anisotropy induced in a film of E1aP(10)Biph(90) is shown as a function of time. During the first 10 s, only the background is measured, to establish a baseline. The argon-ion laser is turned on at 10 s, and is switched off after 30 s. The anisotropy is followed for approximately 200 s. The induced birefringence is approximately 0.09. If the exposure is prolonged, this can reach values of 0.13. Figure 4.25 shows the normalized anisotropy as a function of the temperature of the film. For the case of E1aP, the anisotropy is erased at a temperature of approximately 110 C. In the case of E1aBiph, in which a biphenyl group (tworing system) replaces the single phenyl group in the main chain, the erasure temperature is increased to 140 C. However, when a copolymer with 10% phenyl groups and 90% biphenyl groups was examined, the erasure was found to take place at a temperature exceeding 160 C. Remarkably, the anisotropy actually increases just before erasure. The increase in stiffness provided by the biphenyl group is responsible for the increased stability, while a reorganization of the whole structure, not unlike the case of thermal gain discussed under
4.9 Linear anisotropy
115
0.8
anisotropy (rad)
0.6
0.4
0.2
0.0 0
50
100
150
200
time (s)
Fig. 4.24 Anisotropy induced in a film of E1aP(10)Biph(90) as a function of time. (From N. C. R. Holme, S. Hvilsted, E. Lo¨rincz, A. Matharu, L. Nedelchev, L. Nikolova, and P. S. Ramanujam. Azobenzene polyesters for polarizationholographic storage: part I, Handbook of Organic Electronics and Photonics, H. S. Nalwa ed. American Scientific Publishers, USA (2007) 183–211.) Reproduced with permission from the American Scientific Publishers. E1aP(10)Biph(90)
Normalized anisotropy
1.0
#2 #1
0.8 E1aP 0.6
0.4
0.2
T50% (°C)
Polymer
E1aP(10)Biph(90) #1 E1aP(10)Biph(90) #2 E1aBiph E1aP
E1aBiph
147 146 127 99
0.0 20
40
60
80
100
120
140
160
180
Temperature (°C)
Fig. 4.25 Thermal-stability measurements of normalized anisotropy in E1aP, E1aBiph, and E1aP(10)Biph(90). (From N. C. R. Holme, S. Hvilsted, E. Lo¨rincz, A. Matharu, L. Nedelchev, L. Nikolova, and P. S. Ramanujam. Azobenzene polyesters for polarization holographic storage: part I, Handbook of Organic Electronics and Photonics, H. S. Nalwa ed. American Scientific Publishers, USA (2007) 183–211.) Reproduced with permission from the American Scientific Publishers.
116
Azobenzene and azobenzene-containing polymers
photoaddressable polymers (section 4.6), is responsible for the increase in anisotropy before erasure. 4.10 Photoinduced circular anisotropy in side-chain azobenzene polyesters Illumination of an azobenzene polymer film with linearly polarized light can induce a significant linear anisotropy. In 1990, Kakichashvili reported photoinduced circular dichroism in films of azo-dye-doped gelatin [50]. It was observed in 1997 [51] that large photoinduced circular anisotropy (circular dichroism and optical activity) could be observed in initially isotropic films of a liquid-crystalline side-chain azobenzene polyester on irradiation with a circularly polarized argonion laser beam. The polarimetric set-up used to investigate the photoinduced circular anisotropy in the films is discussed in section 6.1.1. The changes in the optical properties of the sample induced by a circularly polarized argon-ion laser beam at 488 nm are probed at 488 nm and at 633 nm. All the Stokes parameters, as well as the intensity of the beams, are measured every 2 s. If the circularly polarized argon-ion laser beam induces circular anisotropy in the sample, then, for the Jones matrix describing its transmittance we can write in circular coordinates i’ 0 tl e l ; ð4:7Þ T¼ 0 tr ei’r where tl and tr are the amplitude transmittances for the left- and right-circular components of light, and ’l and ’r are the corresponding phase delays. In general, the linearly polarized measuring beams will become elliptically polarized and will be rotated. The circular dichroism and birefringence can be determined from the following equations: S0 ¼ tl2 þ tr2 ; S1 ¼ 2tl tr sinð’l ’r Þ; S2 ¼ 2tl tr cosð’l ’r Þ;
ð4:8Þ
S3 ¼ tl2 tr2 : The angle of polarization rotation in the sample is given by ’l ’r 1 S1 : a¼ ¼ arctan 2 S2 2
ð4:9Þ
4.10 Photoinduced circular anisotropy 4
30
4
20 a, degrees
(b) 10
3
5
10
a, degrees
(a)
117
0 1
–10
3
0
1 2
–5 –20
2
–30 0
4
8
12
16
–10 0
4
t, min
8
12
16
t, min
Fig. 4.26 (a) The rotation of the polarization azimuth at 488 nm induced on illumination with a circularly polarized 488-nm beam and measured with a linearly polarized beam. (b) The same curves measured at 633 nm. Reprinted from L. Nikolova, T. Todorov, M. Ivanov, F. Andruzzi, S. Hvilsted, and P. S. Ramanujam. Photoinduced circular anisotropy in side-chain polyesters, Opt. Mater. 8 (1997) 255–258, with permission from Elsevier.
The transmittances for the left- and right-circular components are given by Tl ¼ t12 ¼
S0 þ S3 ; 2
Tr ¼
S0 S3 : 2
ð4:10Þ
The rotation of the polarization azimuth at 488 nm induced on illumination with a circularly polarized argon-ion laser beam is shown in figure 4.26. The curves shown are for the following laser powers: (1) left-circular polarization, 1.5 mW; (2) left-circular polarization, 20 mW; (3) right-circular polarization, 1.5 mW; and (4) right-circular polarization, 20 mW. Clearly, it is seen that the circularly polarized argon-ion laser beam induces a large optical activity in the film, resulting in a significant rotation of the polarization azimuth of both the measuring argon-ion laser beam and the HeNe laser beam. The optical activity is larger for the blue light. At 488 nm, a value of approximately 6 /lm is observed. The origin of this circular anisotropy can be attributed to the way molecules in a liquid-crystalline azobenzene polyester align themselves on irradiation with elliptically polarized light [52]. In the case of amorphous polymers, for input light with no ellipticity, no optical rotation is observed. However, when the input ellipticity is on the order of 0.6, a large optical rotation on the order of 60 is observed for 5-mm-thick films of the polyester E1aP. The angle of rotation h was found to be h¼
2ed d; 1 e2
ð4:11Þ
118
Azobenzene and azobenzene-containing polymers
where e is the ellipticity of the input light, d ¼ p Dn=k, and d is the thickness of the film. Thus, the rotation angle depends on the ellipticity and on the photoinduced birefringence. Since in the azopolymers used in our experiments Dn < 0, equation (4.11) gives h < 0, so the rotation is in the sense of the rotation of the electric vector of the input polarization, as we have observed experimentally. The factor 2e/(1 e2) strongly increases with increasing e. From (4.11) we obtain h ¼ 0 for e ¼ 0, and h increases with increasing e. The factor d, however, decreases with increasing e, and it is obvious that d ¼ 0 for e ¼ 1, so a very small rotation angle must be expected when e is close to 1. These considerations explain quite well the results from the amorphous azobenzene-containing polymer. The case with the liquid-crystal polymer is to some extent different. The rotation angle h increases even for very large values of e. We believe that this is due to the liquid-crystalline properties of the film. The liquid-crystalline polymer consists of a great number of domains, each domain having a director. Before the illumination the directors are randomly oriented, so the sample is isotropic as a whole. When the incident light has small ellipticity, it induces changes in the orientations of the domain directors and a macroscopic optical axis. Light propagation in this case is very much like that in the amorphous polymers. When the ellipticity of the light is 1, no optical axis is induced. Circularly polarized light in the liquid-crystalline films is influenced by the presence of domain structure. Because the domains have optical axes and are birefringent, the input circularly polarized light propagating through each domain is changed to elliptical polarization, with the ellipticity depending on the order parameter of the domain. This elliptically polarized light must induce changes in the orientation of the directors in a way analogous to that in the amorphous film. Thus, it is expected that a chiral structure will be created in this case, too. It must be noted that, since the initial orientation of the domain directors is random, when the incident light is circularly polarized, there are no fixed directions that must be taken into account when considering light propagation through the film. In this case the photoinduced effect can be considered as a “classical” optical activity. These observations have been well documented in the literature [53–57]. 4.11 The experimental set-up for polarization holography Typically, the following experimental set-up is used to record polarization holograms (figure 4.27). The set-up provides a means of varying the polarization of the recording beams, as well as for a real-time read-out in order to record the diffraction efficiency. A linearly polarized beam, typically from an argon-ion laser or frequencydoubled YAG laser, is used for recording the gratings. This incident beam is split
4.12 Guest–host systems
119
Recording laser beam M HWP POL
QWP
Probe laser beam
PBS
Film M
POL
QWP
QWP
POL
Detector
Fig. 4.27 The set-up used to record a polarization diffraction grating: PBS, polarization beamsplitter; POL, polarizer; HWP, half-wave plate; QWP, quarterwave plate; and M, mirror. (From A. S. Matharu, S. Jeeva and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880.) Reproduced by permission of the Royal Society of Chemistry.
into two orthogonally linearly polarized beams through the polarization beamsplitter. An optional beam-expander with a spatial filter can be used in the incident beam in order to provide a smooth Gaussian profile. These beams are then reflected by mirrors M and overlapped on the film. Polarizers are used in order to ensure that high-quality orthogonally linearly polarized beams are obtained. For orthogonal circular polarization recording, appropriate quarter-wave plates are inserted into the beams. The diffraction efficiency of the grating is probed, typically with a HeNe laser or a diode laser beam, with a wavelength outside the absorption range of azobenzene. Again a polarizer and a half- or quarter-wave plate are used to select the appropriate polarization. As remarked before, pure polarization gratings are obtained only for the case of a pair with horizontal– vertical polarization, or with two p-polarized beams intersecting at 90 . For other cases, the angle between the recording beams is kept as small as possible, in order to minimize the intensity of (absorption) grating formation. 4.12 Polarization holography in guest–host systems Todorov et al. [58] revealed for the first time a material with reversible photoinduced anisotropy, suitable for real-time recording. The material (methyl-red dye introduced into a polymer layer) required low recording intensities (tens of mW/cm2) and possessed excellent reusability. Later they investigated different combinations of azo dyes and polymer matrices to record polarization holograms, and found a system with diffraction efficiency greater than 35% [59]. They also showed that this system is amenable to multiple erasure and repeated recording
120
Azobenzene and azobenzene-containing polymers
without apparent fatigue. Their medium consisted of methyl orange in a polyvinyl alcohol (PVA) matrix, with a thickness of 100 mm. They showed that, on irradiation with polarized light at 488 nm, a fast axis was induced along the direction of polarization, and a slow axis perpendicular to it. The intensity of the argon-ion laser was 100 mW/cm2. After the irradiation had been stopped, the sample was gradually restored to its original state, and the ordering of the dye molecules was lost. The induced birefringence during irradiation exceeded 103. This large birefringence was attributed to the fact that PVA molecules were deformed concomitantly with the photoinduced ordering of the dye molecules. Polarization-holographic recording was accomplished with two plane waves with mutually orthogonal polarization at 488 nm. The grating was read out at 633 nm, outside the absorption band of methyl orange. Typically a diffraction efficiency of 20% was achieved after 20 s. When the recording light was turned off, the diffraction efficiency fell to about a third of that, remaining stable at this value for more than 24 h. The memory time was longer if the films were previously heated to 80 C for a few minutes. Irradiation with a single polarized laser beam erased the grating faster. In a second article in the series [60], they showed experimentally that, for the case of recording with two orthogonal circularly polarized waves, the diffraction efficiency was strongly dependent on the polarization of the reconstructing wave, particularly on its ellipticity. The theoretical foundations for the observations had been put forward by Nikolova and Todorov earlier [61]. Several possible applications of polarization-holographic recording were pointed out by Todorov et al. in the last article of the series [62]. The experimental confirmation of the importance of the polarization state of the recording and probe beams was provided by Todorov et al. [63]. Introduction of 0.06 wt.% of methyl orange into PVA gave good films approximately 100 mm thick, and linearly polarized actinic light induced a dichroism as large as 0.8 and a birefringence of 0.0015. Table 4.1 gives the diffraction efficiencies for various combinations of the polarizations of the recording and the read-out beams. Thus, in the case of recording with orthogonal circular polarization, it was possible to control the efficiency of diffracted light by changing the polarization of the read-out wave. The modulation transfer functions for azo dyes in a PVA matrix were measured by Couture and Lessard [64]. For the cases of methyl orange and acidified methyl red in a PVA matrix, they found that the spatial frequency response was good up to a spatial frequency of 4000 lines/mm. There are also several reports in the literature on use of azodyes in polymer matrices [65, 66]. Several matrices containing azobenzene have been used for observing light induced anisotropy. These systems include cholesteric polypeptide films [67].
4.13 Side-chain polyesters
121
Table 4.1. Diffraction efficiences Polarization of recording wave
Polarization of read-out wave
Diffraction efficiency (%)
Both linear vertical
Vertical Horizontal Vertical Horizontal Circular (same as corresponding wave while recording) Orthogonal circular
1 6 11 11 35
Orthogonal linear Orthogonal circular
0
4.13 Polarization holography in side-chain polyesters We shall now present some basic measurements in polarization holography. The experimental set-up to record polarization gratings has been shown in figure 4.27, except that now the probe laser beam is incident normally on the film to preserve symmetry. A frequency-doubled YAG laser at 532 nm was used as the source. The interbeam angle was 6 . The intensity of each of the writing beams was 30 mW/cm2, and the intensity of the read-out HeNe laser beam was approximately 35 mW/cm2. The diffraction gratings were recorded in a film of E1aP with a thickness of 3 mm. In the first case, we give an example of recording with orthogonally circularly polarized beams, and read-out with a circularly polarized beam. Figure 4.28 shows the diffraction efficiency as a function of time both in the þ1 and in the 1 diffracted order. According to equations (3.57) and (3.58), in this case there should be only one diffraction order, which is consistent with the measurement. The effect of rotating the quarter-wave plate in the probe beam is shown in figure 4.29. As the quarter-wave plate is rotated, the polarization of the read-out beam changes from right-circular to linear to left-circular (with elliptical polarization in between). In this case, the þ1 and 1 diffracted orders exchange energy, and the maximum diffraction efficiency is obtained with left-circularly polarized light. If, instead of the quarter-wave plate to produce a circularly polarized read-out beam, we insert a half-wave plate and rotate the half-wave plate, equation (3.53) shows that the diffracted beams in the þ1 and 1 orders should have equal intensities and should be independent of the azimuth of the read-out polarization. Figure 4.30 shows that the diffracted intensities in the þ1 and 1 orders are indeed equal. However, there is a modulation of the intensities as the half-wave
122
Azobenzene and azobenzene-containing polymers
diffraction efficiency (%)
14 12 10 8 6 4 2 0 0
20
40
60
80
100
120
time (s)
Fig. 4.28 Diffraction efficiency in the þ1 and 1 orders, when a diffraction grating is recorded in a film of E1aP with orthogonal circular polarized beams, and read with a circularly polarized beam.
Fig. 4.29 Diffracted power in the þ1 and 1 orders as a function of the angle of the fast axis of a quarter-wave plate in the read-out beam.
plate is rotated. This modulation can probably be assigned to the quality of the polarizers as well as to the intensities of the two recording beams not being completely equal. In the second case, we employ horizontal–vertical polarized beams as recording beams. Into the probe beam we insert a half-wave plate (instead of
4.13 Side-chain polyesters
123
diffraction efficiency (%)
5 4 +1 order –1 order
3 2 1 0 Rotation cycles
Fig. 4.30 Diffraction efficiency in the þ1 and 1 orders as a function of the angle of the fast axis of a half-wave plate in the read-out beam.
8 diffraction efficiency (%)
7 6 5 +1 order –1 order
4 3 2 1 0 Rotation cycles
Fig. 4.31 Diffraction efficiency in the þ1 and 1 orders when a diffraction grating is recorded with vertically and horizontally polarized light, as a function of the angle of the fast axis of a half-wave plate in the read-out beam.
the quarter-wave plate). As we rotate the half-wave plate, the azimuth of the linearly polarized read-out beam changes. According to equation (3.34), the diffracted beams should have the same intensity and should be independent of the azimuth of the input polarization. Figure 4.31 shows the results of such a measurement. Within the calibration errors of the two detectors, the diffracted orders have the same intensity. As the half-wave plate is rotated, again the intensity of the diffracted orders is modulated by approximately 5%.
124
Azobenzene and azobenzene-containing polymers 12
3
h, %
8
4
1 2
0 –135
–90
–45 a, degrees
0
45
Fig. 4.32 Experimental dependence of the diffraction efficiency on the polarization azimuth of a HeNe reconstructing beam. Curve 1 is obtained 20 min after recording; curve 2, 1 h after recording; and curve 3, 24 h after recording. The solid curves are calculated from equation (3.173). (From L. Nikolova, T. Todorov, M. Ivanov, F. Andruzzi, S. Hvilsted, and P. S. Ramanujam. Polarization holographic gratings in side-chain azobenzene polyesters with linear and circular anisotropy, Appl. Opt. 35 (1996) 3835–3840.) Reprinted with permission from the Optical Society of America.
4.13.1 Polarization-holographic gratings in materials with linear and circular anisotropy Polarization-holographic gratings with two waves having orthogonal linear polarizations (vertical and horizontal) were recorded on films of liquid-crystalline polyester P8a12 [68]. Thin films of the polyester were made by dissolving 2 mg of the polyester in 100 ll of chloroform and casting the solution on a clean glass substrate. The thickness of the film was estimated to be 5 mm. Photoinduced linear and circular anisotropy were found to be induced in the film on irradiation with linear and circularly polarized light, respectively. Gratings were recorded at 488 nm from an argon-ion laser at an intensity of 60 mW/cm2, and the exposure time was 20 min. The reconstruction was done with a linearly polarized HeNe laser beam. The polarization of this beam could be rotated in small steps with a half-wave plate. The diffraction efficiency in the first order was measured, and its dependence on the polarization azimuth while the recording laser was on and off was recorded. Figure 4.32 shows the experimental curves measured during the last minute of the recording, 60 min after recording and 24 h after recording. It is seen that there is a very strong polarization dependence. The diffraction is maximum for a ¼ 45 (horizontal polarization, coinciding with the polarization of the corresponding
4.14 Surface relief
125
Table 4.2. Anisotropic phase differences Anisotropic phase difference (rad) L
D’ D’C
Time after recording t1 ¼ 0
t2 ¼ 1
t3 ¼ 24
0.35 0.11
0.32 0.09
0.53 0.15
argon-ion laser beam) and minimum for a ¼ 45 . From the maximum and minimum values of the diffraction efficiency, we determined from equation (3.179) the values of linear and circular anisotropy induced (table 4.2). After a slight decrease during the first minutes after recording, D’C and D’L increase considerably during the following 24 h. The growth in D’L is actually larger than that in D’C. 4.14 Polarization holography with surface relief 4.14.1 Surface-relief gratings in azobenzene polymers The appearance of SRGs in azobenzene-containing polymers was first observed in 1975 in two laboratories: in the laboratory of Rochon and Natansohn, in Kingston, Canada [69]; and also by Kumar and Tripathy in the University of Massachusetts, USA [70]. They found that, during holographic storage in azopolymer films, relief gratings were recorded together with the phase gratings in the volume of the polymer. The phenomenon gave rise to great interest because of the numerous possible applications of these relief gratings. It was first believed that the appearance of the relief is due to a temperature gradient causing deformation of the material and also mass transport. Then it was found that the surface gratings depend on the polarization of the recording beams: they appear mostly if the two recording beams have p-polarization, that is, if they are polarized along the grating vector. Practically no surface relief was seen for holographic recording with two beams with s-polarization. This is demonstrated in figures 4.33(a) and (b) [71], in which the surfaces of two holographic gratings recorded in a liquid-crystalline azobenzene polyester are shown. The first grating is inscribed with two waves with s-polarization. There is practically no surface grating. The second grating is recorded with p-polarization, along the grating vector, and the surface grating is seen very clearly. Later it became clear that the phenomenon is strongly dependent on the type of the azobenzene material. Figure 4.34 shows two other pictures of SRGs obtained on illumination with a single laser beam through an amplitude mask for various polarizations of the light beam. In this case the azobenzene material was
126
Azobenzene and azobenzene-containing polymers
(a)
(b)
Fig. 4.33 Atomic-force-microscopic scans of a film of P6a12 after irradiation with a single laser beam through an amplitude mask: (a) linear polarization perpendicular to the grating vector and (b) linear polarization parallel to the grating vector. Reprinted with permission from N. C. R. Holme, L. Nikolova, S. Hvilsted, P. H. Rasmussen, R. H. Berg, and P. S. Ramanujam, “Optically induced surface relief phenomena in azobenzene polymers,” Appl. Phys. Lett. 74 (1999) 519–521. Copyright [1999] American Institute of Physics.
amorphous and much more rigid [71]. It is seen that peaks are formed in the illuminated areas when the polarization is perpendicular to the grating vector (s-polarization), whereas trenches are formed instead in the case of p-polarization of the light beam.
4.14 Surface relief
127
(a)
(b)
Fig. 4.34 Atomic-force-microscopic scans of a film of an ornithine-based peptide oligomer with azobenzene in the side chain, after irradiation with a single laser beam through an amplitude mask: (a) linear polarization perpendicular to the grating vector and (b) linear polarization parallel to the grating vector. Reprinted with permission from N. C. R. Holme, L. Nikolova, S. Hvilsted, P. H. Rasmussen, R. H. Berg, and P. S. Ramanujam, “Optically induced surface relief phenomena in azobenzene polymers,” Appl. Phys. Lett. 74 (1999) 519–521. Copyright [1999] American Institute of Physics.
It was also found [72] that there was no need for a light-intensity gradient for the formation of surface relief. Relief gratings appear also upon polarizationholographic recording when the interference light field is of constant intensity and only the polarization is modulated. A very special effect has been observed in
128
Azobenzene and azobenzene-containing polymers
the case when the polarization-holographic grating is recorded with two waves with s- and p-polarization. In this case a surface relief with twice the frequency of the recorded holographic gratings was observed. It has been found that with this recording geometry the surface relief appears first with normal frequency, coinciding with the frequency of the anisotropic grating in the volume of the polymer, and then gradually it is transformed into a grating of doubled frequency. This process is shown in figure 4.35. These double-frequency gratings were first observed only in liquid-crystalline (nematic) azobenzene polymers [73]; lately they have been found in amorphous azopolymers, too [74]. The appearance of relief gratings on the surface of polarization holographic gratings on the one hand changes the polarization properties of the gratings described in chapter 3. Sometimes special conditions are sought in order to avoid the surface relief, for example, if a polarization grating is to be used for polarimetry (see chapter 6). On the other hand, the appearance of the relief gratings increases the total diffraction efficiency and is useful if the polymers are used for stable gratings. Surface gratings have been used also in other applications of polarization holography, which will be described in chapter 6. The experimental set-up used to examine the diffraction due to the anisotropic grating in the volume of the polymer and to the surface relief grating as well as the phase shift between these two gratings, is shown in figure 4.36. Liquid-crystalline azobenzene polyesters were used in these experiments. The time evolution of the diffraction efficiency in each polymer film was measured twice – with vertical and with horizontal polarization of the probe beam [75]. In each experiment two photodetectors measured the vertical and the horizontal components of the þ1 order diffracted beam, which were split by the Wollaston prism. The experimental curves obtained with the polyester P6a12 are shown in figures 4.37(a) and (b) for two different intensities of the recording argon-ion laser beams with orthogonal circular polarization. In the notation Ivv, Ivh, Ihv, and Ihh used in the figure the first index refers to the polarization of the probe beam (vertical or horizontal) and the second refers to the vertical or horizontal component of the diffracted beam. It can be seen from the theoretical consideration presented in section 3.9 that the Jones matrix giving the diffraction in the þ1 order can be written as a a þ b expðid0 Þ : ð4:12Þ Tþ1 ¼ a a þ b expðid0 Þ Here a ¼ sinðD’=2Þ;
ð4:13Þ
(a)
234.67 nm 117.33 nm 0 nm 20 µm
20 µm
10 µm 10 µm
0 µm
0 µm
(b)
337.1 nm 168.55 nm 0 nm 20 µm
20 µm
10 µm 10 µm
0 µm
0 µm
(c)
434.88 nm 217.44 nm 0 nm 20 µm
20 µm
10 µm
10 µm
0 µm
0 µm
Fig. 4.35 Atomic-force-microscope scans of the surface of holographic gratings recorded with vertically and horizontally polarized light with exposure times of (a) 5 s, (b) 10 s, and (c) 20 s. (From I. Naydenova, L. Nikolova, T. Todorov, N. C. R. Holme, P. S. Ramanujam and S. Hvilsted. Diffraction from polarization holographic gratings with surface relief in side-chain polyesters, J. Opt. Soc. Am. B 15 (1998) 1257–1265.) Reproduced with permission from the Optical Society of America.
130
Azobenzene and azobenzene-containing polymers M2
QWP Wollaston prism
PBS
QWP
+1
0
POL HeNe laser
Film HWP
Argon-ion laser
M1
Fig. 4.36 The polarization-holographic set-up used to monitor the anisotropy and surface relief in azobenzene polymers: POL, polarizer; QWP, quarter-wave plates; HWP, half-wave plate; PBS, polarization beamsplitter; and M1 and M2, mirrors. The terms “0” and “þ1” indicate the 0th- and 1st-order diffracted beams, respectively. Reprinted with permission from N. C. R. Holme, L. Nikolova, P. S. Ramanujam, and S. Hvilsted, “An analysis of the anisotropic and topographic gratings in a side-chain liquid-crystalline azobenzene polyester,” Appl. Phys. Lett. 70 (1997) 1518. Copyright [1997] American Institute of Physics.
where D’ is the anisotropic phase difference due to the birefringence dn induced in the volume of the polymer film, D’ ¼ p dn d/k, d being the film thickness and k ¼ 633 nm; and b ¼ cosðD’Þ J1 ðDwÞ;
ð4:14Þ
where Dw ¼ p(Dn)d/k, Dn is the difference between the refractive indices of the air and the polymer film, 2 Dd is the height of the relief, and J1(Dw) is the firstorder Bessel function of the first kind. In (4.12) d0 is the phase difference between the wave diffracted from the volume anisotropy and that diffracted from the SRGs. It is easy to calculate that the values of the four measured intensities are (for a probe-beam intensity of unity) Ivv ¼ a2 þ b2 þ 2ab cos d0 ; Ivh ¼ Ihv ¼ a2 ;
ð4:15Þ
Ihh ¼ a þ b 2ab cos d0 : 2
2
Figures 4.37(a) and (b) show the experimentally obtained curves Ivv(t), Ihv(t), Ivh(t), and Ihh(t) for the film P6a12. It is seen that Ivh ¼ Ihv and Ivv > Ihh. This
4.14 Surface relief (b)
0.10
Normalized signal from photodetector
0.09
0.30 75 mW
10 mW
0.08
Ivv
0.07 0.06
Ihv, Ivh
0.05 Ihh
0.04 0.03 0.02
Normalized signal from photodetector
(a)
131
0.25 Ivv 0.20 Ihv, Ivh 0.15 Ihh 0.10
0.05
0.01 0.00
0.00 0
30
60
90
time (s)
120 150
0
10 20 30 40 50 60 70 time (s)
Fig. 4.37 Experimental curves Ivv, Ihv, Ivh, and Ihh as functions of time (a) for a laser power of 10 mW corresponding to an incident intensity of 140 mW/cm2 and (b) for a power of 75 mW corresponding to an intensity of 1060 mW/cm2. Reprinted with permission from N. C. R. Holme, L. Nikolova, P. S. Ramanujam, and S. Hvilsted, “An analysis of the anisotropic and topographic gratings in a side-chain liquid-crystalline azobenzene polyester,” Appl. Phys. Lett. 70 (1997) 1518. Copyright [1997] American Institute of Physics.
means that 2ab cos d0 > 0. We assume from symmetry considerations that the value of d0 can only be 0, p/2, or p. It is seen from the experiment that cos d0 6¼ 0, i.e., d0 6¼ p/2. We know from polarimetric experiments that linearly polarized light induces negative birefringence in this material. So, a < 0 for the vertical polarization of the probe beam and, since b > 0 (d > 0, Dw > 0), we conclude that cos d0 < 0, and d0 ¼ p. This means that the two gratings are shifted by half a period, the peak of the SRG corresponding to the polarization direction parallel to the grating vector. This result was obtained for several other liquid-crystalline polyesters as well. There are other azopolymers for which the peaks of the relief correspond to the vertical direction in the recording pattern [76]. From the experimental curves Ivv(t), Ihv(t), Ivh(t), and Ihh(t), using (4.15) we can calculate a(t) and b(t), and therefore the values of D’ and Dw as functions of time. The curves D’(t) and Dw(t) are shown in figures 4.38 and 4.39 for the cases of the polyesters P6a12 and P8a12, respectively. On plotting the ratio of D’(t) to Dw(t), the polarization grating and the SRG are found to appear simultaneously.
132
Azobenzene and azobenzene-containing polymers 0.6
(a)
(b)
1.2 75 mW
10 mW
0.4
1.0
Phase shift (rad)
Phase shift (rad)
∆w
∆w
0.5
0.3
0.2
0.8
0.6
0.4 ∆c
0.1
∆c
0.2
0.0
0.0 0
30
60
90
time (s)
120
150
0 10 20 30 40 50 60 70 80 time (s)
Fig. 4.38 Calculated values of the anisotropic phase difference, D’, and the phase difference due to surface relief, Dw, as functions of time, (a) for an incident intensity of 140 mW/cm2 and (b) for an incident intensity of 1060 mW/ cm2 for a film of P6a12. Reprinted with permission from N. C. R. Holme, L. Nikolova, P. S. Ramanujam, and S. Hvilsted, “An analysis of the anisotropic and topographic gratings in a side-chain liquid-crystalline azobenzene polyester,” Appl. Phys. Lett. 70 (1997) 1518. Copyright [1997] American Institute of Physics.
4.15 Polarization holography with UV light Another important parameter is the resolution obtainable in thin films of the polyesters. This has consequences for the fidelity of storage and reproduction. The higher the spatial frequency that can be recorded, the better is the fidelity of recording. Two different procedures were used to determine the resolution in the material. In the first, polarization-holographic diffraction gratings were recorded in the material with a laser operating at 257 nm [77]. The second uses evanescent beam holography, to be discussed later. The experimental set-up to record polarization-holographic gratings is similar to the one shown in figure 4.27. Since the recording is in the deep UV, the optical components are fabricated in fused silica. A beam from a frequency-doubled argon-ion laser at 257 nm is split by means of a polarization beamsplitter into two orthogonally linearly polarized beams. Quarter-wave plates with appropriately oriented fast axes are used to introduce orthogonal circular polarization. The beams overlap on the film consisting of an
4.16 Evanescent-wave polarization holography 1.0
0.20 Ivv
∆w
0.8 0.15
Ivh Ihv
0.10 Ihh
Phase shift (rad)
Normalized signal from photodetector
133
0.05
0.6
0.4
0.2
∆c
0.0
0.00 0
20
40
60
time (s)
80
100
0
20
40
60
80
100
time (s)
Fig. 4.39 Experimental curves Ivv, Ihv, Ivh, and Ihh as functions of time and calculated values of the anisotropic phase difference, D’, and the phase difference due to surface relief, Dw, as functions of time, for a film of P8a12 for an incident intensity of 140 mW/cm2.
amorphous three-component copolyester, E1aP(25)12(75), deposited on a quartz slide. The polarization grating is read-out with a circularly polarized 635-nm beam from a diode laser. Gratings were recorded with a density of 2800 line-pairs/mm with a diffraction efficiency of 0.03%. Higher excited states of azobenzene in the trans and cis configurations have been found to contribute to the diffraction efficiency. 4.16 Evanescent-wave polarization holography In this experiment, evanescent waves were used to write gratings of high spatial frequency in the same polyester. The experimental set-up is shown in figure 4.40. The copolyester E1aP(25)12(75) is directly deposited onto the hypotenuse of a high-refractive-index gadolinium–gallium–garnet right-angled prism. The refractive index of the prism is 1.988 at 488 nm, which is higher than the refractive index of the polyester. The angle of incidence of the write beams on the interface is approximately 61 , resulting in an evanescent-wave wavelength of 280 nm. Since the waves are counter-propagating in the medium, this results in a grating period of 140 nm, corresponding to more than 7000 lines/mm. The grating was read-out using a 635-nm laser beam, which was also evanescent.
134
Azobenzene and azobenzene-containing polymers
Fig. 4.40 The set-up used to record an evanescent hologram. (From P. S. Ramanujam. Evanescent polarization holographic recording of sub-200 nm gratings in an azobenzene polyester, Opt. Lett. 28 (2003) 2375–2377.) Reproduced with permission from the Optical Society of America.
A diffraction efficiency of greater than 1% was obtained [78]. It was found that the diffraction efficiency increased in the dark after the writing beams had been switched off. The biphotonic effect found in other azobenzene polymers [25], which converts cis states of the azobenzene to trans states, followed by an ordering process due to aggregation, is proposed as the reason for this increase in diffraction efficiency. 4.17 Biphotonic polarization holography As mentioned earlier in this chapter, an interesting biphotonic process was found to occur with certain azobenzene polyesters. In this case, there is a variation of the main-chain spacer length to the much shorter adipate with a propanediol (P6a4). When a film of P6a4 was illuminated with orthogonally circularly polarized beams, after a very short exposure, the gratings disappeared, i.e., the diffraction efficiency as recorded with a HeNe laser fell to zero. The area of irradiation became completely clear, devoid of mesogenic domains. After the writing beams had been turned off, the diffraction efficiency slowly began to increase [25], sometimes reaching as much as 45%–50%. This phenomenon could still be observed even several hours after the switching off of the write beams. Further UV–visible-absorption spectroscopic measurements showed that,
References
135
after the irradiation with the pump (write) beams, azobenzene was transferred to the cis state, and irradiation with the red HeNe laser beam returned azobenzene to the trans state [26]. In this case, the chromophores were found to orient themselves parallel to the polarization of the red beam. A modification of this experiment, using blue incoherent light to sensitize the azochromophores and red light to write the gratings, was found to be successful [79–82]. However, these gratings written with red light were not stable and disappeared after a few hours. It was found that biphotonic gratings could also be recorded in a film of P6a12 [83]. Unpolarized light from a 150-W Xe lamp was passed through a band-pass filter between 350 and 450 nm, and focused on the sample. The intensity of the light was approximately 30 mW/cm2. Two beams derived from a linearly polarized HeNe laser beam were made to interfere on the film. A diffraction efficiency of approximately 0.02% was achieved. In guest– host systems the beams could be modified with retarder plates. The self-diffracted red laser beam was then detected. The maximum diffraction efficiency that could be achieved using this technique was 0.2% in liquid-crystalline polyester films. Interestingly, even this process was found to produce a surface relief with a maximum amplitude of approximately 20 nm. Using a film of P6a4, on the other hand, gave a diffraction efficiency of approximately 30% [84]. Stable biphotonic polarization gratings have also been fabricated in an azobenzene polymethacrylate [85]. References 1. A. S. Matharu, S. Jeeva, and P. S. Ramanujam. Liquid crystals for holographic optical data storage. Chem. Soc. Rev. 36 (2007) 1868–1880. 2. T. G. Pedersen, P. S. Ramanujam, P. M. Johansen, and S. Hvilsted. Quantum theory and experimental studies of absorption spectra and photoisomerization of azobenzene polymers, J. Opt. Soc. Am. B 15 (1995) 2721–2730. ¨ ber eine besondere mechanische Wirkung des polarisierten Lichts. 3. A. Teitel. U Naturwissenschaften 44 (1957) 370–371. 4. A. C. Albrecht. Photo-orientation. J. Chem. Phys. 27 (1957) 1413–1414. 5. B. S. Neporent and O. V. Stolbova. The orientation photodichroism of viscous solutions. Opt. Spectrosk. 10 (1961) 146 (in Russian). 6. B. S. Neporent and O. V. Stolbova. Reversible orientation photodichroism in viscous solutions of complex organic substances. Opt. Spectrosk. 14 (1963) 331–336 (in Russian). 7. O. V. Stolbova. Calculation of the kinetics of the rise and fall of orientation dichorism in viscous solutions. Opt. Spectrosk. 16 (1964) 288 (in Russian). 8. O. V. Stolbova. Calculation of the steady-state value of the reversible photodichroism of viscous solutions. Sov. Phys. Dokl. 8 (1963) 275–277. 9. A. M. Makushenko, O. V. Stolbova, and G. D. Chekhmataeva. Kinetics of reversible orientation photodichroism. Opt. Spectrosk. 22 (1967) 281–282 (in Russian).
136
Azobenzene and azobenzene-containing polymers
10. A. M. Makushenko and O. V. Stolbova. Nonlinearity of reversible orientation of photodichroism. Opt. Spectrosk. 28 (1970) 323–324 (in Russian). 11. A. M. Makushenko, B. S. Neporent, and O. V. Stolbova. Reversible orientational photodichroism and photoisomerization of aromatic azo compounds I: model of the system. Opt. Spectrosk. 31 (1971) 295–299 (in Russian). 12. A. M. Makushenko, B. S. Neporent, and O. V. Stolbova. Reversible orientational photodichroism and photoisomerization of complex organic compounds in viscous solutions II: azobenzene and substituted azobenzene derivatives. Opt. Spectrosk. 31 (1971) 397–401 (in Russian). 13. V. P. Shibaev, S. G. Kostramin, and N. A. Plate´. Thermotropic liquid crystalline polymers. 14. Thermo-recording in liquid-crystalline polymers with the aid of a laser beam. Polym. Commun. 24 (1983) 364–365. 14. H. J. Coles and R. Simon. High-resolution laser addressed liquid-crystal polymer storage displays. Polymer 26 (1985) 1801–1806. 15. M. Eich, B. Reck, H. Ringsdorf, and J. H. Wendorff. Reversible digital and holographic optical storage in polymeric liquid crystals (PLC). Proc. SPIE 682 (1986) 93–96. 16. M. Eich, J. H. Wendorff, B. Reck, and H. Ringsdorf. Reversible digital and holographic optical storage in polymeric liquid crystals. Makromol. Chem. Rapid Commun. 8 (1987) 59–63. 17. M. Eich and J. H. Wendorff. Erasable holograms in polymeric liquid crystals. Makromol. Chem. Rapid. Commun. 8 (1987) 467–471. 18. M. Eich and J. H. Wendorff. Laser induced gratings and spectroscopy in monodomains of liquid-crystalline polymers. J. Opt. Soc. Am. B 7 (1990) 1428–1436. 19. S. Ivanov, I. Yakovlev, S. Kostromin, and V. Shibaev. Laser induced birefringence in homeotropic films of photochromic comb-shaped liquid-crystalline co-polymers with azobenzene moieties at different temperatures. 9, Makromol. Chem. Rapid Commun. 12 (1991) 709–715. 20. F. Chaput, D. Riehl, Y. Le´vy, and J.-P. Boilot. Azo oxide gels for optical storage. Chem. Mater. 5 (1993) 589–591. 21. H. J. Haitjema, G. L. von Morgen, Y. Y. Tan, and G. Challa. Photoresponsive behavior of azobenzene-based (meth)acrylic (co)polymers in thin films. Macromolecules 27 (1994) 6201–6206. 22. Th. Fisher, L. La¨sker, J. Stumpe, and S. G. Kostromin. Photoinduced optical anisotropy in films of photochromic liquid-crystalline polymers. J. Photochem. Photobiol. A. Chem. 80 (1994) 453–459. 23. J. H. Si, T. Mitsuyu, P. X. Ye et al. Optical storage in an azobenzene–polyimide film with high glass transition temperature. Opt. Commun. 147 (1998) 313–316. 24. S. Hvilsted, F. Andruzzi, C. Kulinna, H. W. Siesler, and P. S. Ramanujam. Novel side-chain liquid crystalline polyester architecture for reversible optical storage, Macromolecules 28 (1995) 2172–2183. 25. P. S. Ramanujam, S. Hvilsted, and F. Andruzzi. Novel biphotonic holographic storage in a side-chain liquid crystalline polyester. Appl. Phys. Lett. 62 (1995) 1041–1043. 26. P. S. Ramanujam, S. Hvilsted, I. Zebger, and H. W. Siesler. On the explanation of the biphotonic processes in polyesters containing azobenzene moieties in the side chain. Makromol. Chem. Rapid Commun. 16 (1995) 455–461. ´ . Kerekes, E. Lo¨rincz, P. S. Ramanujam, and S. Hvilsted. Light scattering of thin 27. A azobenzene side-chain polyester layers. Opt. Commun. 206 (2002) 57–65.
References
137
28. L. Nedelchev, A. S. Matharu, S. Hvilsted, and P. S. Ramanujam. Photoinduced anisotropy in a family of amorphous azobenzene polyesters for optical storage. Appl. Opt. 42 (2003) 5918–5927. 29. P. E. Nielsen, M. Egholm, R. H. Berg, and O. Buchardt. Sequence selective recognition of DNA by strand displacement with a thymine substituted polyamide. Science 254 (1991) 1497–1500. 30. R. Berg. S. Hvilsted, and P. S. Ramanujam. Peptide oligomers for holographic data storage. Nature 383 (1996) 505–508. 31. P. H. Rasmussen, P. S. Ramanujam, S. Hvilsted, and R. H. Berg. A remarkably efficient azobenzene peptide for holographic information storage. Am. Chem. Soc. 121 (1999) 4738–4743. 32. A. Natansohn and P. Rochon. Photoinduced motions in azo containing polymers. Chem. Rev. 102 (2002) 4139–4175. 33. L. Andruzzi, A. Altomare, F. Ciardelli et al. Holographic gratings in azobenzene side-chain polymethacrylates, Macromolecules 32 (1999) 448–454. 34. A. Archut, F. Vo¨gtele, L. De Cola et al. Azobenzene-functionalized cascade molecules: photoswitchable supramolecular systems. Chem. Eur. J. 4 (1998) 699–706. 35. Y. He, X. Gu, M. Guo, and X. Wang. Dendritic azo compounds as a new type of amorphous molecular material with quick photoinduced surface-relief-grating formation ability, Opt. Mater. 31 (2008) 18–27. 36. P. C. Che, Y. N. He, and X. G. Wang. Hyperbranched azo-polymers synthesized by azo-coupling reaction of an AB2 monomer and postpolymerization modification. Macromolecules 38 (2005) 8657–8663. 37. Y. N. He, X. G. Wang, and Q. X. Zhou. Synthesis and characterization of a novel photoprocessible hyperbranched azo polymer, Synth. Met. 132 (2003) 245–248. 38. R. Hagen and T. Bieringer. Photoaddressable polymers for optical data storage, Adv. Mater. 13 (2001) 1805–1810. 39. S. J. Zilker, T. Bieringer, D. Haarer et al. Holographic data storage in amorphous polymers. Adv. Mater. 10 (1998) 855–859. 40. S. Yoneyama, T. Yamamato, O. Tsutsumi et al. High performance material for holographic gratings by means of a photoresponsive polymer liquid crystal containing tolane moiety with high birefringence. Macromolecules 35 (2002) 8751–8758. 41. A. Saishoji. D. Sato, A. Shishido, and T. Ikeda. Formation of Bragg gratings with large angular multiplicity by means of the photoinduced orientation of azobenzene copolymers. Langmuir 23 (2007) 320–326. 42. F. X. You, M. Y. Paik, M. Ha¨ckel et al. Control and suppression of surface relief gratings in liquid-crystalline perfluoroalkyl-azobenzene polymers. Adv. Funct. Mater. 16 (2006) 1577–1581. 43. Y. Morikawa, S. Nagano, K. Watanabe et al. Optical alignment and patterning of nanoscale microdomains in a block-copolymer thin film. Adv. Mater. 18 (2006) 883–886. 44. T. Yamamoto, M. Hasegawa, A. Kanazawa, T. Shiono, and T. Ikeda. Phase-type gratings formed by photochemical phase transition of polymer azobenzene liquid crystals: enhancement of diffraction efficiency by spatial modulation of molecular alignment. J. Phys. Chem. B 103 (1999) 9873–9878. 45. S. R. Marder, B. Kippelen, A. K.-Y. Jen, and N. Peyghambarian. Design and synthesis of chromophores and polymers for electro-optic and photorefractive applications. Nature 388 (1997) 845–851.
138
Azobenzene and azobenzene-containing polymers
46. K. Meerholz, B. L. Volodin, Sandalphon, B. Kippelen, and N. Peyghambarian. A photorefractive polymer with high optical gain and diffraction efficiency near 100%. Nature 371 (1994) 497–500. 47. R. Raschella`, I.-G. Marino, P. P. Lottici et al. Silica-based photorefractive sol–gel films for holography. J. Non-cryst. Solids 345 & 346 (2004) 428–432. 48. V. P. Shibaev, A. Yu. Bobrovsky, and N. I. Boiko. New types of multifunctional liquid crystalline photochromic copolymers for optical data recording and storage, Macromol. Symp. 174 (2001) 319–332. 49. N. C. R. Holme, P. S. Ramanujam, and S. Hvilsted. Photoinduced anisotropy measurements in liquid-crystalline azobenzene side-chain polyesters. Appl. Opt. 35 (1996) 4622–4627. 50. Sh. D. Kakichashvili. Circular-polarized light-induced gyrotropy (photogyrotropy) in pickled azo dyes. Pis’ma Zh. E´ksp. Teor. Fiz., 16 (1990) 28–32. 51. L. Nikolova, T. Todorov, M. Ivanov et al. Photoinduced circular anisotropy in sidechain azobenzene polyesters. Opt. Mater. 8 (1997) 255–258. 52. L. Nikolova, L. Nedelchev, T. Todorov et al. Self-induced light polarization rotation in azobenzene-containing polymers. Appl. Phys. Lett. 77 (2000) 657–659. 53. L. Nedelchev, A. Matharu, L. Nikolova, S. Hvilsted, and P. S. Ramanujam. Propagation of polarized light through azobenzene polymer films. Mol. Cryst. Liq. Cryst. 375 (2002) 563–575. 54. S. Pages, F. Lagugne´-Labarthet, T. Buffeteau, and C. Sourisseau. Photoinduced linear and/or circular birefringences from light propagation through amorphous or smectic azopolymer films. Appl. Phys. B 75 (2002) 541–548. 55. L. Nedelchev, L. Nikolova, A. Matharu, and P. S. Ramanujam. Photoinduced macroscopic chiral structures in a series of azobenzene copolyesters. Appl. Phys. B 75 (2002) 671–676. 56. Y. L. Wu, A. Natansohn, and P. Rochon. Photoinduced chirality in thin films of achiral polymer liquid crystals containing azobenzene chromophores. Macromolecules 37 (2004) 6801–6805. 57. H. Sumimura, T. Fukuda, J. Y. Kim et al. Photoinduced chirality in an azobenzene amorphous copolymer bearing a large birefringent moiety. Jap. J. Appl. Phys. I 45(1B) (2006) 451–455. 58. T. Todorov, N. Tomova, and L. Nikolova. High-sensitivity material with reversible photo-induced anisotropy. Opt. Commun. 47 (1983) 123–126. 59. T. Todorov, N. Tomova, and L. Nikolova. Polarization holography. 1. A new highefficiency organic material with reversible photoinduced birefringence. Appl. Opt. 23 (1984) 4309–4312. 60. T. Todorov, L. Nikolova, and N. Tomova. Polarization holography. 2. Polarization holographic gratings in photoanisotropic materials with and without intrinsic birefringence. Appl. Opt. 23 (1984) 4588–4591. 61. L. Nikolova and T. Todorov. Diffraction efficiency and selectivity of polarization holographic recording. Opt. Acta 31 (1984) 579–588. 62. T. Todorov, L. Nikolova, K. Stoyanova, and N. Tomova. Polarization holography. 3. Some applications of polarization holographic recording. Appl. Opt. 24 (1985) 785–788. 63. T. Todorov, L. Nikolova, N. Tomova, and V. Dragostinova. Photoinduced anisotropy in rigid dye solutions for transient polarization holography. IEEE J. Quant. Electron. 22 (1986) 1262–1267.
References
139
64. J. J. A. Couture and R. A. Lessard. Modulation transfer-function for thin-layers of azo dyes in PVA matrix used as an optical-recording material. Appl. Opt. 27 (1988) 3368–3374. 65. M. Ivanov and T. Eiju. Azodye gelatine films for polarization holographic recording. Opt. Rev. 8 (2001) 315–317. 66. S. P. Bian and M. G. Kuzyk. Real-time holographic reflection gratings in volumemedia of azo-dye-doped poly(methylmethacrylate). Opt. Lett. 27 (2002) 1761–1763. 67. M Sisido, H. Narisawa, R. Kishi, and J. Watanabe. Induced circular-dichroism from cholesteric polypeptide films doped with an azobenzene derivative. Macromolecules 26 (1993) 1424–1428. 68. L. Nikolova, T. Todorov, M. Ivanov et al. Polarization holographic gratings in sidechain azobenzene polyesters with linear and circular photoanisotropy. Appl. Opt. 35 (1996) 3835–3840. 69. P. Rochon, E. Batalla, and A. Natansohn. Optically induced surface gratings in azoaromatic polymer-films, Appl. Phys. Lett. 66 (1995) 136–138. 70. D. Y. Kim, S. K. Tripathy, L. Li, and J. Kumar. Laser-induced holographic surfacerelief gratings on nonlinear optical polymer films. Appl. Phys. Lett. 66 (1995) 1166–1168. 71. N. C. R. Holme, L. Nikolova, S. Hvilsted et al. Optically induced surface-relief phenomena in azobenzene polymers. Appl. Phys. Lett. 74 (1999) 519–521. 72. P. S. Ramanujam, N. C. R. Holme, and S. Hvilsted. Atomic force and optical nearfield microscopic investigations of polarization holographic gratings in a liquid crystalline azobenzene side-chain polyester. Appl. Phys. Lett. 68 (1996) 1329–1331. 73. L. Naydenova, T. Nikolova, N. C. R. Todorov et al. Diffraction from polarization holographic grtings with surface relief in side-chain azobenzene polyesters. J. Opt. Soc. Am. 15 (1998) 1257–1265. 74. I. Mancheva, G. Martinez-Ponce, S. Calixto et al. Polarization holographic gratings with surface relief in azobenzene-containing polymers. Proc. SPIE 5449 (2004) 24–29. 75. N. C. R. Holme, L. Nikolova, P. S. Ramanujam, and S. Hvilsted. An analysis of the anisotropic and topographic gratings in a side-chain liquid crystalline azobenzene polyester. Appl. Phys. Lett. 70 (1997) 1518–1520. 76. M. Helgert, B. Fleck, L. Wenke, S. Hvilsted, and P. S. Ramanujam. An improved method for separating the kinetics of anisotropic and topographic gratings in sidechain azobenzene polyesters. Appl. Phys. B 70 (2000) 803–807. 77. P. S. Ramanujam, L. Nedelchev, and A. Matharu. Polarization holographic and surface relief gratings at 257 nm in an azobenzene polyester. Opt. Lett. 28 (2003) 1072–1074. 78. P. S. Ramanujam. Evanescent polarization holographic recording of sub-200 nm gratings in an azobenzene polyester. Opt. Lett. 28 (2003) 2375–2377. 79. H. Bach, K. Anderle, Th. Fuhrmann, and J. H. Wendorff. Biphoton-induced refractive index change in 4-amino-40 -nitroazobenzene polycarbonate. J. Phys. Chem. 100 (1996) 4135–4140. 80. P. Wu, B. Zou, X. Wu et al. Biphotonic self-diffraction in azo-doped polymer film. Appl. Phys. Lett. 70 (1997) 1224–1226. 81. P. Wu, L. Wang, J. Xu et al. Transient biphotonic holographic grating in photoisomerizative azo materials. Phys. Rev. B 57 (1998) 3874–3880. 82. P. Wu, X. Wu, L. Wang et al. Image storage based on biphotonic holography in azo/ polymer system. Appl. Phys. Lett. 72 (1998) 418–420.
140
Azobenzene and azobenzene-containing polymers
83. C. Sa´nchez, R. Alcala´, S. Hvilsted, and P. S. Ramanujam. Biphotonic holographic gratings in azobenzene polyesters: surface relief phenomena and polarization effects. Appl. Phys. Lett. 77 (2000) 1440–1442. 84. C. Sa´nchez, R. Alcala´, S. Hvilsted, and P. S. Ramanujam. High diffraction efficiency polarization gratings recorded by biphotonic holography in an azobenzene liquid crystalline polyester. Appl. Phys. Lett. 78 (2001) 3944–3946. 85. F. J. Rodriguez, C. Sa´nchez, B. Villacampa et al. Red light induced holographic storage in azobenzene polymethacrylate at room temperature. Opt. Mater. 28 (2006) 480–487.
5 Other photoanisotropic materials
5.1 Photoinduced anisotropy in silver-halide materials The appearance of dichroism in silver-halide emulsions exposed to linearly polarized light was first observed by F. Weigert [1–3] in 1919. This effect is called the Weigert effect (W-effect). Weigert discovered that the effect was most pronounced if the emulsion layer was first exposed to unpolarized shortwavelength light to form print-out silver and afterwards to long-wavelength linearly polarized light. Photodichroism was observed in layers only before photographical development. Later it was found that the effect could be reversible [4]. When a silver chloride (AgCl) emulsion layer was exposed to polarized red light and then the polarization direction was rotated by 90 , the degree of dichroism first diminished, then disappeared completely, and, with continued exposure, reappeared with opposite sign with respect to the first time. This reversible effect could be achieved several times by rotating the polarization direction. Photoinduced dichroism was later observed also in single crystals of AgCl. Hilsch and Pohl [5] and Cameron and Taylor [6] found that, when AgCl crystals are exposed first to unpolarized UV light and then to linearly polarized red light, they become dichroic. The effect was also observed by Zocher and Coper [7]. All these early investigators of the W-effect tried also to give a theoretical explanation. They all assumed that the first exposure created anisotropic particles distributed in all directions. Weigert called them “micelles” and supposed that they consisted of silver, silver chloride, and gelatin. Savostyanowa [8] and Tcherdyncev [9] assumed the production of rod-like colloidal Ag particles. The second exposure with polarized red light destroys the anisotropic particles oriented along the light polarization direction. These theories were suggested and supported by the fact that dichroic elements can be formed by orientation of elongated particles. The rod-like-particle theory was also treated mathematically [8, 9]. However, it could not be proved experimentally. Several groups [10, 11] 141
142
Other photoanisotropic materials
tried to observe the structure of the print-out silver particles using electronmicroscope methods. Anisotropic silver particles were not found. A kind of orientation in the distribution of spherical grains was observed instead. It was concluded that if there were some anisotropic particles their dimensions were smaller than 20 nm. In 1957 Kamiya [12] carried out a detailed investigation of the photodichroism of the print-out silver including the reversible W-effect. He found experimental evidence in favor of the view that the photodichroism is related to anisotropic silver particles. His experimental results also proved that the phenomenon occurred only in Ag–AgHal (silver–silver-halide) systems and not in pure Ag layers. The interest in the W-effect arose again in the seventies of the last century due to the presence of lasers in optical laboratories and the development of optical storage, holography, and modern methods of image processing. In a series of articles, Ageev and Miloslavski [13–15] investigated photoinduced dichroism in thin films of Ag–AgHal. They used a HeNe laser to induce anisotropy. Using electron microscopy they found that the dichroism induced in their films was related to the formation of chains of practically spherical Ag granules of diameter about 20 nm. These chains are stretched in the direction of the light polarization vector in AgI–Ag films and perpendicular to it in AgCl–Ag and AgBr–Ag. An explanation of the photodichroism based on a theoretical model taking into account the dipole interaction between neighbor granules was given. Optically induced anisotropy in photochromic glasses containing very small silver-halide microcrystals (diameter about 10 nm) was investigated by Borrelli et al. [16–18]. They established a correlation between the spectrum obtained after the first UV-light exposure and the anisotropic behavior. They also found that the photoinduced dichroism was larger if the samples were exposed simultaneously to unpolarized UV light and polarized long-wavelength light (see figures 5.1(a) and (b)). Once induced the dichroism exhibited a memory effect after thermal fading (figure 5.2). The explanation of the anisotropic effect can be found in terms of preferential polarized-light bleaching of anisotropically shaped silver specks on the halide microcrystals. A similar theory is presented by Anikin et al. [19]. They concluded that both in AgHal emulsions and in glasses the W-effect was related to selective bleaching of anisotropic silver particles of diameter a few nanometers. These particles are pointed out to be mainly oblate. Jonathan and May [20] used two incoherent, perpendicularly polarized signals to record the spatially varying anisotropy in emulsions obtained from Kodak 649F or Agfa-Gaevart 10E75 photographic plates. They showed that it is possible to reconstruct an interferogram whose contrast is maximum and whose
5.1 Silver-halide materials (a)
100
143
(b) 100
80 80 % TRANSMISSION
% TRANSMISSION
|| ⊥
60
40 UV light 20
polarized red light
60 || 40 ⊥ 20
0
0 0
1
2
3
TIME, min
4
5
0
1
2
3
4
TIME, min
Fig. 5.1 Parallel and perpendicular transmission at k ¼ 540 nm versus time: (a) with UV light initially, then removed and polarized bleaching light switched on; (b) with UV and polarized beams incident simultaneously (according to N. F. Borrelli, J. B. Chodak, and G. B. Hares. Optically induced anisotropy in photochromic glasses. J. Appl. Phys. 50 (1979) 5978–5087, reproduced with permission from the American Institute of Physics).
spatial frequency is twice that of the interferogram obtained when the same vibrations are parallel. Debrus et al. [21] proposed the use of the photoinduced anisotropy in AgCl emulsions for image processing. They found a method to transform the gray levels of black and white transparency into different colors. The method makes use of the fact that the presence of dichroism is accompanied by the presence of birefringence. The transparency to be processed was twice recorded on AgCl emulsion using white light. The light polarization was rotated by 90 between the exposures. Then the plate was observed between crossed polarizers. Since photodichroism and photobirefringence depend on the irradiance and the wavelength, gray levels are transformed into colors. A rotation of the analyzer generated different color distributions on the plate. A similar method was used to detect differences between two images [22]. The images are recorded on two AgCl emulsion plates. The polarization direction of light used to record the second image was rotated by 90 with respect to the first recording. Then the two plates were observed between crossed polarizers: only the identical parts of the two images were seen as dark; the other regions appeared bright.
144
Other photoanisotropic materials
% TRANSMISSION
100 80
THERMAL FADE 50 °C REDARKENED UV LIGHT
60 40
||
20
⊥
0 0
18
32 48/0
2
4
6
8
10
(hours) TIME (min)
Fig 5.2 Memory of the photoinduced dichroism. Glass thermally faded at 50 C and redarkened at room temperature. (According to N. F. Borrelli, J. B. Chodak, and G. B. Hares. Optically induced anisotropy in photochromic glasses. J.Appl. Phys. 50 (1979) 5978–5087, reproduced with permission from the American Insitute of Physics.)
Pangelova et al. [23] carried out an investigation of the photoinduced anisotropy in a series of AgCl emulsions aimed at their application for polarization holography. They found that the photoanisotropy in these materials depends on their sensitivity to UV light. The larger the sensitivity, the larger was the photoanisotropy. The UV-sensitivity was much larger in emulsions synthesized in an excess of Agþ or Cl ions than in emulsions with a neutral surface of the AgCl grains. Besides, the absorption maximum in the visible of the UV-darkened emulsion layers depended on the charge of the grains; it was about 500 nm for positively charged surfaces (pAg ¼ 2), and about 600 nm for a negative charge of the grains (pAg ¼ 8.5) (see figure 5.3) (pAg ¼ log[Agþ] is a measure for the silver-ion activity in the emulsion before coating). In the latter case the AgCl microcrystals were considerably large (up to 1 lm in diameter). This limits the resolution and therefore their application in holography. Much more appropriate for polarization holography are the fine-grain AgCl emulsions synthesized in an excess of Agþ ions and chemically sensitized with halide acceptors – sodium azide (NaN3), sodium nitrite (NaNO2), or hydrazinehydrochloride (N2H42HCl) [23–25]. The AgCl microcrystals in them are 10–60 nm in diameter. The exposure of the emulsion layers to UV light results in a broad absorption band in the visible depending on the grains’ size and the light intensity. In these darkened layers dichroism is induced with a linearly polarized HeNe laser. A typical spectrum of the dichroic ratio p ¼ (D? Dk)/(D? þ Dk), where Dk and D? are the optical densities for light polarized parallel and perpendicular to the HeNe laser polarization, is shown in figure 5.4. The values
5.1 Silver-halide materials 1.5
145
1
1.0 ∆D
4 2
0.5 3 0.0
450
500
550 l, nm
600
650
Fig 5.3 Dependence of the photoinduced optical density DD on k for layers with different pAg: curve 1, pAg ¼ 2; curve 2, pAg ¼ 5.8; curve 3, pAg ¼ 7.5; and curve 4, pAg ¼ 8.5. (According to N. Pangelova, Ts. Petrova, L. Nikolova, and T. Todorov. Reversible photodichroism in silver halides emulsion layers. J. Inf. Rec. Mater. 13 (1985) 239–244.)
0.20 0.15 0.10 p 0.05 0.00 –0.05 400
450
600 500 550 wavelength, nm
650
700
Fig. 5.4 The spectrum of the normalized dichroism induced by a HeNe laser beam. (According to Ts. Petrova, N. Pangelova, L. Nikolova and T. Todorov. Fine-grain AgCl emulsion layers with reversible Weigert-effect. J. Imag. Sci. 29 (1985) 238–240, reproduced with permission from the Society for Imaging Science & Technlogy.)
of p depend on the size of the AgCl crystals (only for very small grains, <20 nm), on the UV-light intensity, and on the polarized light intensity. Since the dichroic ratio increases with increasing rate of preliminary darkening, it is concluded that a stronger W-effect is connected with the formation of a large number of smallsized Ag particles, which are assumed to be anisotropic. It has already been mentioned that the dichroism induced in AgCl emulsion layers is also accompanied by photoinduced birefringence due to the dispersion relations. Figure 5.5 illustrates a simultaneous real-time measurement of the photoinduced dichroism and birefringence at 633 nm in two types of fine-grain AgCl
146
Other photoanisotropic materials (a) 2
B
D 1
0
A
5
10
15
20 t, min
(b) 0
∆D
–0.5
A B
–1.0 0
5
10
15
20 t, min
(c) 30 ∆w°
B
20
A
10 0
5
10
15
20 t, min
Fig. 5.5 The changes in average optical density D, dichroism DD and anisotropic phase difference D’ ¼ 2p D n d/k induced by a HeNe laser beam in films that had previously been darkened with UV light; Dn is the birefringence and d the film thickness. Curves A correspond to layers sensitized with hydrazine hydrochloride and curves B to layers sensitized with sodium nitrite. (According to L. Nikolova, Ts. Petrova, M. Ivanov, T. Todorov and E. Nacheva. Polarization holographic gratings: diffraction efficiency of amplitude–phase gratings and their realization in AgCl emulsions. J. Mod. Opt. 39 (1992) 1953–1963, reproduced with permission from Taylor & Francis.)
emulsion layers, sensitized with N2H42HCl and NaNO2, according to [23]. The emulsion layers had previously been darkened with UV light. The maximum values of the photobirefringence are considerably small, amounting to about 5 · 103. For the applications of AgCl dichroic emulsions in polarization holography, for example for the fabrication of polarization-holographic gratings (described in
5.2 Alkali-halide with color centers
147
chapter 3), the photoinduced anisotropy in them must be fixed. Conventional fixing methods with sodium thiosulfate, however, are not appropriate for these fine-grain emulsions because photolytic Ag specks have high solubility and dissolve in the fixing agent. This leads to a strong decrease and even to a disappearance of the photoanisotropy. A method of fixing of the small Ag specks was given in [25]. It is based on a decrease in solubility of the Ag particles obtained with the help of mercaptane Ag salts adsorbed onto the surface of the specks. In such a way a significant part of the induced anisotropy can be fixed for a very long time (more than 10 years). The AgCl emulsion layers described in [23, 24] and the fixing method proposed in [25] were used to obtain stable polarization-holographic gratings. Their diffraction efficiency is low (64%), but it must be pointed out that for the moment AgCl emulsions are the only photoanisotropic material that can be fixed and will remain stable for a very long period even when illuminated with short-wavelength light. This has made it possible to use them for stable polarization diffraction gratings for use in polarimetry (see section 6.1). 5.2 Alkali-halide crystals containing anisotropic color centers Alkali-halide crystals were among the first materials to have been used for polarization holography [26]. They have a simple cubic structure with alternative alkali cations and halide anions. Their optical properties depend on the presence of color centers in them – specific, intentionally induced crystalline defects [27– 29]. Usually they are anion vacancies at which electrons are trapped. The optical transitions of these electrons result in the appearance of absorption bands in the visible and the otherwise-transparent crystals appear colored. The absorption in each band depends on the concentration of the color centers while the location of the spectral peaks depends on the type of the centers and on the host material. The anion vacancies can be single or grouped into two or more; they can also be influenced by impurities. The different types of color centers investigated for holographic storage are shown in figure 5.6. The simplest one is the F center, which is a single halide vacancy with one electron trapped at it. It possesses cubic symmetry. The FA center is an F center in the immediate neighborhood of an impurity alkali ion of smaller size along h100i replacing the host lattice cation. The FB center is an F center in the neighborhood of two foreign ions. M centers are pairs of two nearest-neighbor F centers along one of the six h110i directions and MA centers are M centers next to a foreign cation. FA, FB, M, and MA centers are optically anisotropic. The anisotropy of FA and FB centers is due to the foreign ions which reduce the cubic symmetry of the F centers. The absorption spectrum of FA and FB(1) centers consists of two main absorption bands due to
148
Other photoanisotropic materials
Fig. 5.6 Schematic representation of the color centers in alkali-halide crystals used in holography.
two types of optical transitions – one transition polarized along the symmetry axis h100i determined by the impurity ion (FA1), and a two-fold-degenerate transition polarized perpendicular to it (FA2) [30]. The absorption spectra of M and MA centers consist of several bands [31, 32]. Each of them is related to a transition moment along a definite crystallographic direction corresponding to the symmetry axes of the centers. The most prominent absorption is related to a transition along the axis joining the two vacancies, namely along h110i; its maximum is at a longer wavelength with respect to the others. Polarization optical storage in alkali-halide crystals is based on the reorientation of the anisotropic color centers on illumination with linearly polarized light. FA centers, for example, can have three equivalent orientations along the three h100i directions. Their reorientation from one h100i direction to another is due to a local migration of the anion vacancy around the foreign ion. The probability of such a migration is very large when the FA center is optically excited even at low temperature (the activation energy is 0.09 eV). On the other hand, at low temperature it is practically zero for the unexcited centers. When FA centers are illuminated with light polarized along one of the three h100i directions appropriate to either FA1 or FA2 absorption bands, only some of them become optically excited. Thus, a statistical reorientation process tends to populate more and more those orientations in which the centers are no longer excited by the incident polarized light and the system becomes “aligned” [30, 33–35]. Obviously, this aligned state is directly related to the absorption
5.2 Alkali-halide with color centers
149
spectrum of the crystal – it becomes dichroic. The dichroism induced at low temperature can be extremely large. Reorientation of FA centers and the switching between the two polarized spectra are reversible, and many cycles are possible at low temperature. At room temperature the induced dichroism is stable for a few days only and repetitive illuminations result in aggregation of centers and fatigue of the crystal. Photoinduced reorientation of M and MA centers in KCl crystals has been investigated extensively by Schneider [36, 37], and photoinduced reorientation in NaF crystals by Casasent and Caimi [38, 39]. Unlike the FA centers, M and MA centers can be optically oriented only by exciting their more energetic transitions. Orientation cannot be initiated with light polarized along the axis joining the two vacancies. The photoinduced dichroism is reversible; the induced dichroism is stable at room temperature in NaF : Li crystals and at low temperature in KCl and KCl : Li crystals. Schneider was the first to propose information storage using reorientation of color centers in alkali crystals [40]. Holographic recording was first demonstrated by Lanzl et al. [41]. Later the application of the photoinduced dichroism in these crystals for high-density storage, bit-oriented [42, 43] and holographic [26, 44–49], was intensively investigated. There are two different ways to record a hologram using reorientation of color centers. The first of them requires preliminary ordering of the centers along one direction. Then the hologram is stored with two waves with identical linear polarization exciting the ordered centers. At the interference maxima the anisotropic centers leave this orientation and the optical density (OD) decreases; at the minima the OD remains the same. The holographic information is encoded in the modulation of the concentration of the color centers oriented along the light polarization direction. This method is similar to holography in isotropicamplitude recording materials in that the average OD of the crystal is changed. Nevertheless, the hologram is anisotropic and its efficiency depends on the polarization of the read-out beam. Real polarization-holographic storage in alkali-halide crystals was achieved for the first time by Blume et al. [26], using reorientation of FA centers in KCl : Na crystals. They used two recording waves with orthogonal linear polarizations, along [110] and ½110. Then, at the locations with phase difference d ¼ 0, the resultant light is along [100] and excites the FA centers oriented along this direction (see figure. 5.7). At d ¼ p light is polarized along [010] and excites centers oriented along [010]. Actually, because of the nonzero incident angle of the two waves, the resultant polarization has also a component along the [001] direction, so the light excites all the FA centers in the crystal. The holographic exposure results in the redistribution of the centers along the three h100i
150
Other photoanisotropic materials (a)
(b) —
+
—
+
—
+
—
+
—
+
—
+ —
Na aa —
+
+ —
[100]
+
—
—
+
+
[010]
—
—
+
—
+
—
+
—
+
—
+
—
+
+
—
+
—
Na aa
—
+
—
+
—
+
—
Fig. 5.7. The resultant light polarization at the locations d ¼ 0 (a) and d ¼ p/2 (b).
directions. The diffraction from the hologram is due to the periodic modulation of the resultant dichroism. This storage does not lead to a bleaching process. The overall optical density of the crystal does not change. This may be particularly helpful during multiple storage. The results demonstrated that superposition of 100 holograms seems to be feasible, each one requiring an average exposure of 1 mJ/cm2. A theory for the hologram formation that is based on reorientation of FA centers has been developed in [47]. It was shown that, at saturation, when the periodic distribution of the centers along the three h100i directions is nonsinusoidal, the diffraction efficiency of pure amplitude volume gratings could be larger (up to 12%) than that predicted by Kogelnik’s theory for volume amplitude holograms, 3.7% (for sinusoidal gratings) [50]. Another way to obtain more efficient holograms in alkali-halide crystals is to make use of the anomalous dispersion and the anisotropic modulation of the refractive index (birefringence) accompanying the photoinduced dichroism. Using a wavelength for which the birefringence is strong and the absorption considerably low for the read-out, Schneider et al. obtained a polarization-holographic grating with 15% efficiency in KCl crystals containing M centers. The reorientation of M centers, however, needs much more energy, about 10 J/cm2, and the readout in KCl is nondestructive only at low temperature. Nondestructive read-out at room temperature is achieved in NaF crystals with M and MA centers, but the diffraction efficiency is extremely low. The principal types of alkali-halide crystals and color centers used for polarization-holographic recording are listed in table 5.1. The best results have been obtained with KCl and KCl : Na crystals containing FA or M centers. Their holographic resolution is >5000 lines/mm. Polarization-holographic recording in them is reversible, but it is stable only at low temperature (<80 K).
5.3 Arsenic sulfide and arsenic selenide
151
Table 5.1. Properties of the holograms written in various types of alkali-halide crystal containing color centers Crystal
Centers
Write energy
Diffraction efficiency Comments
KCl : Na
FA
1–5 mJ/cm2
1–3%
KCl : Na:
FB
20 mJ/cm2
4%
KCl
M
10 J/cm2
15%
NaF
M
2 J/cm2
0.08%
NaF : Li
MA
1–2 J/cm2
0.01%
Destructive read-out only at low temperature Destructive read-out only at low temperature Destructive read-out only at low temperature Nondestructive read-out at room temperature Nondestructive read-out at room temperature
5.3 Arsenic sulfide and arsenic selenide Chalcogenide glasses based on S, Se, and Te containing elements such as As, Ge, Sb, and Ga are generally transparent in the visible to infrared. These glasses are highly optically nonlinear. There are several reports on photoinduced anisotropy in chalcogenide glasses [51–53]. Krecmer et al. [54] noticed that a negative vectorial photoinduced anisotropy arose when the glassy crystalline chalcogenide composition As4Se3 was irradiated with polarized light. The negative anisotropy was ascribed to the As4Se3 molecular units embedded in an amorphous network. During the course of illumination, the negative anisotropy gradually decreased in amplitude and then was replaced by a positive vectorial anisotropy. As2S3 and As2Se3 are amorphous materials used for holographic recording. A mechanism based on the orientation of quasicrystalline clusters for photoinduced ansiotropy has been proposed by Tanaka et al. [55]. High-quality phase holograms with diffraction efficiencies of 80% have been recorded in real time. Kwak et al. [56] reported the first recording of scalar and vector holographic gratings in amorphous As2S3 thin films. Linearly polarized argon-ion laser beams at 514 nm are used to record diffraction gratings and a HeNe laser at 633 nm is used for the read-out. The intersection angle between the recording beams was 15 , corresponding to a grating spacing of 2 lm. They observed that amplitudemodulated gratings gave an efficiency of approximately 20% in 180 s, and pure polarization gratings produced a monotonic steady-state efficiency of 0.2%. The fabrication of polarization gratings is explained on the basis of induced nonlinear optical polarization in amorphous media. Assuming this, the authors find that the
152
Other photoanisotropic materials
Fig. 5.8 Anisotropy induced in an As2S3 film by an linearly polarized beam at 532 nm as a function of time. The anisotropy is probed at 633 nm. ð3Þ
ð3Þ
ð3Þ
nonlinear susceptibility v1111 ¼ 3:2 · 102 esu and v1122 = v1111 ¼ 0:98 in the vicinity of the absorption edge. With a film kindly donated by C. Dietrich, we have investigated the polarization-holographic properties of As2S3. The amorphous As2S3 films we investigated are produced by vacuum evaporation and are approximately 5 lm thick [57]. The anisotropy induced by a linearly polarized laser beam at 532 nm and probed at 633 nm is shown in figure 5.8. Polarization-holographic properties were then examined with the set-up shown in figure 4.27. Figure 5.9 shows the diffraction efficiency measured at 633 nm as a function of time for the cases of orthogonal circularly polarized beams (LCP– RCP) and orthogonal linearly polarized (sp) beams. Figure 5.10 shows the cases of ss, pp, and the same orthogonal circularly polarized beams. As mentioned earlier, pure polarization holograms appear only for the combination of sp polarized light, and, to a large extent, when the beams are orthogonally circularly polarized and incident on the film with a small interbeam angle. So, from figure 5.9, it is obvious that there is a polarization hologram whose efficiency is not very high. The reason for the appearance of photoanisotropy is postulated to be the dielectric tensor of the sample becoming an ellipsoid of revolution with the major axis parallel to the resultant polarization of light [58, 59]. Parallel polarizations produced gratings with large efficiency. It was possible to achieve a diffraction efficiency of 20% within 100 s. The reason for this is the appearance of a surface relief. Surface-relief gratings in chalcogenide systems have been reported before [60–63]. The atomistic origin of
5.3 Arsenic sulfide and arsenic selenide
153
0.006 laser off diffraction efficiency
0.005 LCP–RCP 0.004 0.003 0.002 laser on 0.001 s–p 0.000 0
100
200
300
400
500
600
time (s)
Fig. 5.9. Diffraction efficiency as a function of time for an As2S3 film irradiated with orthogonally circularly (RCP–LCP) and linearly (s–p) polarized light.
0.35 laser off
diffraction efficiency
0.30
RCP–RCP p–p
0.25 0.20
s–s
0.15 0.10 0.05 0.00 0
100
200
300
400
500
600
time (s)
Fig. 5.10 Diffraction efficiency for an As2S3 film irradiated with parallel circularly polarized, horizontally, and vertically polarized light beams.
photoinduced-polarization-dependent volume change in As-based chalcogenide glasses has been discussed by Chen et al. [64]. They used the technique of extended X-ray-absorption fine-structure measurements during irradiation with polarized laser light. They found that there is an expansion of the nearestneighbor distance around Se atoms, the magnitude of which depends on the direction of light polarization.
154
Other photoanisotropic materials
Two remarks must be made here. (1) In the case of gratings created with parallel-polarized beams, there is a weak tendency for the efficiency to increase after the 532 nm beam has been switched off. We believe that this is because the red laser is also instrumental in causing a volume change. A volume change due to irradiation at 800 nm has recently been reported [65]. (2) For the case of sp irradiation, the second-order diffraction is approximately five times stronger than the first-order diffraction. This indicates that a grating with half the period is being written in the material. This observation has also been made in the case of azobenzene polymers, as discussed in chapter 4. An instrument for recording and evaluating multiplexed holograms has been designed by Gonzalez-Leal et al. [66]. 5.4 Bacteriorhodopsin Real-time optical recording and processing of information is an area of increasing interest. In particular, holographic methods for analog storage can find applications in a variety of pattern-recognition systems. The notion of parallel optical processing, with its inherent capacity for high-speed computations is indeed an appealing concept. The bottleneck in this area has been the availability of suitable materials. One material that has a fast temporal response, has no fatigue, and does not require high voltages for operation is bacteriorhodopsin. Bacteriorhodopsin (BR) is the photosynthetic protein in bacteria known as halobacteria since they grow in extreme salt concentrations [67]. This protein is closely related to rhodopsin, the visual pigment in the retina of animals and humans. The photochemical process taking place in these bacteria generates a proton-gradient force across the cell membrane under anerobic conditions. The potential energy thus created can be used in the synthesis of adenosine triphosphate (ATP). The proton donors and acceptors are amino acids positioned at the a-helix structure of the bacteriorhodopsin molecule [68]. The site of the photochemical reaction in the bacteria is the so-called purple membrane. The first step in the photochemical process is the absorption of photons (figure 5.11) by bacteriorhodopsin in the ground state in the wavelength region 480–650 nm, with a quantum efficiency of 0.64 [69]. The resulting intermediate excited state has a lifetime of 0.5 ps. From this state, it decays through a series of intermediate states with various lifetimes to a metastable species, called the M-state. The M-state has a peak absorption at 412 nm and has a natural lifetime of approximately 10 ms. This can, however, be photostimulated by means of light at 412 nm to return to the BR state in 200 ns. The light absorption in the purple membrane is caused by three factors: (1) the chromophore, (2) its formation of a Schiff base with lysine, and (3) the presence of point charges in the membrane. The
5.4 Bacteriorhodopsin
155
Protonization Photoactive purple membrane Ground state B lmax = 570 nm Photostimulated decay t = 200 ns
Protonization Intermediates Σt = 50 µs
Intermediates Σt = 10 ms
Photoactive intermediate state M lmax = 412 nm Deprotonization
Fig. 5.11 The photocycle of the purple membrane. (From L. Lindvold and P. S. Ramanujam. The use of bacteriorhodopsin in optical processing: a review. J. Sci. Ind. Res. 54 (1995) 55–66.)
retinal chromophore undergoes a trans–cis isomerization resulting in a transfer of protons to the outside surface of the membrane. As the chromophore relaxes back to the trans state in the dark, it acquires a proton from the cytoplasm, completing the photocycle. Of particular interest is the lifetime of the M-state. This can be dramatically altered through a change in the pH of the surrounding matrix, through a genetic modification, or through variations in humidity. The M-state lifetime has been reported to be 1000 times greater in a film fabricated with a pH 9 solution containing bacteriorhodopsin, guanidine hydrochloride, and diaminopropane [70]. At a temperature of approximately 40 C, the M-state can be thermally stabilized, which is important for permanent optical storage [71]. Furthermore, in a dried film, the M-state lifetime increases due to the low proton availability. Conventional mutagenesis or genetic engineering can also be used to influence the M-state lifetime [72, 73]. A variation of the pH in the mutant leads to a change in the lifetime of the M-state by three orders of magnitude at room temperature. External electric fields also affect the M-state lifetime [74].
156
Other photoanisotropic materials
Optically induced absorption changes in bacteriorhodopsin under an electric field have been investigated by Okazaki and Takeda [75]. They found that a new intermediate state appears due to light illumination during the presence of the electric field, at room temperature. This state is stable until it is again illuminated. Bacteriorhodopsin has also been found to be stable at temperatures up to 140 C, under conditions under which most proteins denature [76]. Films with optical densities greater than 3, of thickness varying from 20 to 150 lm, can easily be made in gelatin matrices with pH values up to 9. Large quantum efficiency, long-term stability against thermal and photochemical degradation, sensitivity over a broad spectral range, a large spatial frequency response and a reasonable diffraction efficiency characterize this ubiquitous material. The material does not show any sign of fatigue even after 106 write–read–erase cycles. Many new and interesting applications in optical processing await this exciting material. Holographic applications such as optical storage and pattern recognition and dynamic time-average interferometry using bacteriorhodopsin films were demonstrated by Renner and Hampp [77]. Real-time holographic correlation of two video signals in a dual-axis joint-Fourier-transform correlator with two liquid-crystal television screens as input devices and bacteriorhodopsin film as the holographic material with a signal-to-noise ratio of 45 dB was performed by Thoma and Hampp [78]. This technique was later extended to the study of randomly moving three-dimensional objects. The TV frame rate was met even at fairly low intensities. The speed of an object moving randomly in the field of view of a video camera was monitored through a joint-Fouriertransform correlator [79]. Real-time pattern recognition was demonstrated by Hampp et al. [80]. Real-time holographic image correction using bacteriorhodopsin was discussed by Downie [81]. Experimental results on one-way coherent imaging through a thin phase-aberrating medium using holographic techniques using bacteriorhodopsin were presented. A final resolution of greater than 20 line-pairs/mm was shown to be possible, using polarization holography. Photoinduced anisotropy in thin films of bacteriorhodopsin has been utilized in the fabrication of both an incoherent-to-coherent converter (optically addressed spatial light modulator) and a coherent-to-incoherent converter. Commercially available purple-membrane suspensions are sonicated first, in order to break up the aggregations that may form, and then mixed with a gelatin solution. The solution is then cast on level glass plates, and allowed to gel and dry for about 24 h. Since the main constituent of gelatin is a polypeptide chain, a tremendous intrinsic buffer capacity is facilitated. Previous experiments have shown [82] that the optical anisotropy induced depends on the pH value of the host matrix. A pH
5.4 Bacteriorhodopsin
157
value of 9–10 provides the largest anisotropic response. White light from a 100-W tungsten lamp filtered through a Schott OC515 filter is the source of incoherent light. A chrome-on-glass U.S. Air Force Resolution target is the object and a krypton laser beam (413 nm) is the coherent source. The bacteriorhodopsin film is illuminated by a polarized light beam from the krypton laser, and the beam is crossed through an analyzer. Thus, without the white-light source, the intensity reaching the detector is zero. The Air Force target, illuminated by white light, is imaged onto the bacteriorhodopsin film through a 45 polarizer. Owing to the optical anisotropy induced in the film, the coherent beam is let through the analyzer carrying the image of the Air Force target. A contrast ratio of 100:1 was achieved at a resolution of 114 line-pairs/mm [83]. Ferrari et al. [84] have used polarization holography to enhance the contrast of phase-object reconstruction. Their proposed system consists of a two-beam interferometer in which the reference and test waves are circularly polarized orthogonally to each other. They are superposed upon a bacteriorhodopsin film, creating a polarization grating that is distorted by the phase of the test object. This polarization pattern is read by a polarized HeNe laser beam. They showed analytically and experimentally that, when the zeroth diffraction order is removed, an interferogram with doubled phase profile and enhanced contrast is obtained. Okado-Shudo et al. [85] have performed polarization-holographic studies on a film of bacteriorhodopsin. An argon-ion laser operating at 515 nm was employed for writing the grating and a HeNe laser to examine the diffracted beam. The interbeam angle was 8 . The diffraction took place in the Raman–Nath regime. The intensities of the writing beams were as low as 2 mW/cm2 and that of the read-out was 0.5 mW/cm2. Orthogonal linear and orthogonal circular writing waves were employed, and the authors explain their results using a Fraunhoferdiffraction integral analysis. The diffraction efficiency for two-s-beam writing and s-beam read-out is given as 0.005. The diffraction efficiency from a grating with two orthogonal circularly polarized beams to write and a circularly polarized beam for read-out is on the same order as above. Zheng et al. [86, 87] have performed recording with both parallel and orthogonal linearly polarized light beams, achieving polarization-holographic storage in genetic-mutant BR-D96N film in both transmission-type geometry and reflection-type geometry. Polarization properties of diffracted light and scattered light are discussed for two different cases, parallel-polarization recording and orthogonal-polarization recording. It is shown that, compared with reconstruction with reference light, reconstruction with the phase-conjugated wave of the reference light can improve the signal-to-noise ratio of the reconstructed diffraction image. The wavefront aberration of the object light introduced by an irregular phase object in the optical pathway can also be corrected effectively, which ensures that the reconstructed
158
Other photoanisotropic materials
diffraction image has a better fidelity. The preliminary angle-multiplexed volume holographic storage multiplexed by transmission-type geometry and reflectiontype geometry was demonstrated in the BR-D96N film. Experiment showed that there was minimal cross-talk between the two pages of images. Polarization multiplexing in a film of bacteriorhodopsin has been demonstrated by Koek et al. [88]. Two images were multiplexed at the same spot in a film of D96N. The film had an aperture of 100 mm · 100 mm with a thickness of 30 lm and an optical density of 1.5 at 570 nm. The holograms were recorded with a pulsed frequency-doubled Nd:YAG laser with an output of 320 mJ per 7-ns pulse at 532 nm. In this set-up, the first image is recorded by use of left-circular polarization both for the reference been and for the object beam, and the second image is recorded by use of left-circular polarization for the reference beam and right-circular polarization for the object beam. When they are reconstructed with left-circularly polarized light, the two images are reconstructed simultaneously with orthogonal polarizations, and can be separated out with a polarization beamsplitter. It must be noted that both images are reconstructed with left-circularly polarized light. An enhancement of photoanisotropy has been observed to be brought about in a film of bacteriorhodopsin by using two exciting beams of orthogonal polarization [89]. The interesting variation here is that one of the beams is a 568-nm beam from an Ar–Kr laser with linear polarization at 45 clockwise from the vertical. The other exciting beam was a 442-nm beam from a He–Cd laser with its polarization at 45 counter-clockwise from the vertical. The transmission of a vertically polarized HeNe laser beam at 633 nm was probed when only one or both the exciting beams were turned on. It was found that large photoanisotropy could be achieved when both exciting beams were used simultaneously. This technique has been applied to demonstrate an all-optical switch with the possibility of controlling the sign of the output. 5.5 Photoanisotropy in organic dyes Photoinduced anisotropy in dye solutions was first reported by Weigert in 1919 [1, 2]. He observed that coated films of dye/binder solutions become dichroic if they are exposed to linearly polarized light that can be absorbed by these dyes. This new effect found great interest from other authors. In 1932 Kondo examined the photoresponse of about 1700 different dyes and found that for 450 of them there was a dichroic bleach-out effect [90]. Later it was found that photodichroism in gelatin-dye films decreases with increasing temperature [91, 92]. The first explanation of the effect was also given by Weigert, and it is still accepted. He assumed that dye molecules are present in the layer at random positions and that the polarized radiation is absorbed mostly by those molecules
5.5 Organic dyes
159
whose optical transitions are along the direction of the electric vector of the radiation. The absorption is followed by modification of selected molecules. As a result the unchanged molecules form an anisotropic system. The interest in photoinduced anisotropy in dye solutions was revived in the seventies and later with regard to its applications in modern optics. It is clear that the effect can be observed only in dyes whose absorption is changed on exposure to light, that is, in photochromic dyes. This process is very often reversible and due to transitions between two molecular forms (A and B) with distinct absorption spectra [93]: A , B: ð5:1Þ A is the stable form of the dye; light initiates transitions A ! B. The photoprocess