Petroleum Engineering Handbook Editor-in-Chief Howard B. Bradley Professional/Technical Training Consultant
Associate E...
3006 downloads
12633 Views
156MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
Petroleum Engineering Handbook Editor-in-Chief Howard B. Bradley Professional/Technical Training Consultant
Associate Editors Fred W. Gipson Senior Engineering Professional (retired) Conoco Inc.
Mohamed Mortada President Mortada Intl. Inc.
Aziz S. Odeh Senior Scientist Mobil R&D Corp.
Lewis L. Raymer President Lewis L. Raymer Enterprises
Phillip S. Sizer Senior Vice President/Technical Director Otis Engineering Corp.
Gerry L. Smith Engineering Consultant (deceased)
Third Printing Society of Petroleum Engineers Richardson, TX, U.S.A.
@Copyright 1987 by the Society of Petroleum Engineers. Printed in the United States of America. All rights reserved. This book, or parts thereof, cannot be reproduced in any form without written consent of the publisher.
Third printing, Feb. 1992, incorporating minor changes on Pages 22-3,30-3, 30-4, 33-2, and 51-52.
ISBN 1-55.563-010-3
ii
Preface The 1962 edition of the Petroleum Production Handbook filled a need at that time for a comprehensive compilation of practical information and data covering production equipment and reservoir engineering. This 1987 edition updates the original 48 chapters and adds 11 new ones. New technology, developed over the past 25 years, resulted in improved equipment, materials, and methods. They are described and discussed in the revised original chapters and in the new ones. The 11 new chapters are the following: Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter
7-Electric Submersible Pumps 1‘&Offshore Operations 19-Crude-Oil Emulsions 4%Miscible Displacement 46-Thermal Recovery 47-Chemical Flooding 48-Reservoir Simulation 5 l-Acoustic Well Logging 52-Mud Logging 58-SI Metric System of Units and SPE Metric Standard 59-SPE Letter and Computer Symbols Standard
This 1987 edition, now called the Petroleum Engineering Handbook, provides a current and worthwhile addition to the industry’s literature for students and experienced professionals working in the petroleum industry. The handbook is again divided into three sections: Sec. 1, Mathematics (one chapter); Sec. 2, Production Engineering (18 chapters); and Sec. 3, Reservoir Engineering (40 chapters). There are 57 chapters written by professionals who are recognized as authorities in their fields of expertise. Chap. 58 is a revised version of the 1982 SI Metric System of Units and SPE Metric Standard, and Chap. 59 is the 1986 revision of the 1984 Standard SPE Letter and Computer Symbols for Economics, Formation Evaluation and Well Logging, Natural Gas Engineering, and Petroleum Reservoir Engineering. The Mathematics section presents the basic tables and calculation procedures required by persons engaged in petroleum production. The Production Engineering section covers basic types of materials, methods, and tools available for use in petroleum operations, including their capabilities and proper applications. The Reservoir Engineering section treats gas, oil, condensate, and formation water properties and correlations; reservoir rocks and traps; primary, secondary, and tertiary recovery data and methods; oil and gas reserves; formation evaluation, including well logging methods; and well treating methods. The what, why, how, and now-what aspects of each topic are emphasized. Also, at the end of the appropriate chapters, key equations are presented with SI metric units. Special acknowledgment is due the SPE staff for their immeasurable help and advice, the associate editors for their avid dedication to the technical-editing task, and all the authors who contributed much time and effort to provide the timely and excellent information included within each chapter. We are much indebted to the editor-in-chief of the 1962 edition, Thomas C. Fricke. and to the original group of authors for their arduous 3-year job of developing the original edition of the Petro/eum Production Handbook. Special thanks are due Ed Mayer of THUMS and B.J. Dotson of Mobil Oil Corp. (now retired) for their advice and helpful discussions on the proper use of the 1986 SPE standard letter symbols throughout the handbook and for their editing of Chap. 59, the SPE Letter and Computer Symbols Standard. Our hope is that by proper application of the updated information contained within the second edition of this handbook, the petroleum-industry professional will be led to more efficient production and use of the world’s petroleumenergy resources. Howard B. Bradley Editor-in-Chief
Acknowledgments The Society of Petroleum cited material.
Engineers
sincerely
thank\
the following
organizations
and individuals
for permission
to use the
Chap. 2 Figs. 2.1 through 2.3 and 2.6 through 2.8, from Casino,
Tubi,l~, and Drill Pipe,
API Spec.
5A, 38th edition.
API.
Dallas
(1985).
Fig. 2.9, from Line Pipe, API Spec. 5L, 35th edition. API. Dallas (1985). Figs. 2.10A, 2.10B, 2.11, 2.12, and 2.14 through 2.18, from 7hrt&inR, &g;,lg, 1 Ith edition, API. Dallas (1985). Table 2.1, modified from Cusing, Tubing,
and Drill Pipe,
and 7’hveud hl.~fcct;or2,
API
Spec,SB.
API Spec. 5A, 37th edition, API, Dallas (1984). Tubing, and Drill Pipe,“ Bull., USS. Pittsburgh.
Tables 2.2, 2.5 through 2.7, and 2.25 through 2.27, “Casing,
PA
(1972).
Tables 2.3, 2.4, and 2.24, API. Dallas
modified
from “Performance
Propertics
of Casing,
Tubing,
and Drill Pipe,”
Apf Bu//. 5~2,
(1983).
Tables 2.8 through 2.11 and 2.28,
from “USS
Seamless
Casing.
Tubing,
and Drill Pipe,”
Bu//, , USS. Pittsburgh,
PA
(1972).
Table 2.14, Bull. 664. National Supply Co.. Houston. Tables 2.31 through 2.33, 2.36, and 2.37, from Line Pipe, API Spec. 5L. 34th edition. API, Dallas (1984). Tables 2.38 through 2.43, from “Formulas and Calculations for Casing, Tubing. Drill Pipe. and Lint Pipe Properties.” API Bull. 5C3,
third edition
with Supplement
No. 1. API.
Dallas (1983). Inspection.
Tables 2.44 through 2.54, from Thrrudit~~. Gaging, und thread No. 4. API.
Dallas
API Spec.
5B,
10th edition
with Supplement
(1983).
Chap. 3 Figs, 3.1 and 3.3, and Tables 3.1 through 3.33, from Speci’carionsfor Spec. 6A. 14th and 15th editions, API. Dallas (April 1. 1986). Fig. 3.2, courtesy McEvoy Co., General Catalog 58-59 (Jan. 1959). for AWHEM Fig. 3.5, from Eichenberg, R., “Design Consideration 22, 1957. Figs. 3.6 through 3.17, courtesy Otis Engineering Corp.. Dallas.
Wellhcad
15,000
and Chrisrtnas
psi Flanges,”
ASME
Tree Eyuipment.
Paper
57.PET-23,
API
Sept.
Chap. 4 Figs. 4.1 through 4.11, from Patton,
L.D. and Abbott, W.A.: Well Completions and Workovers: Energy Publications, Dallas (1985) 57-67. Tables 4.1 and 4.2, from Pucker Culculations Handbook, Baker Oil Tool Div. (1971). second
The Systems
Approuth.
edition,
Chap. 5 Fig. 5.1, from Winkler.
H.W.:
“How
to Design
a Closed
Rotativc
Gas Lift System-Part
I: Proccdurc,”
World Qj/ (July
1960) 116-19.
Figs. 5.2, 5.5, 5.6, and 5.18, from Gus Lij?, Book 6 of API Vocational
Training
Series,
revised
edition.
API. Dallas
(1984)
65.
Fig. 5.3, from Winkler.
H.W.: “Here’s How to Improve Your Gas Lift Installations-Part I : Pressure at Depth World Oil (Aug. 1959) 63-67. Figs. 5.4 and 5.29, from Winkler. H.W. and Smith. S.S.: Cameo Gas Liji Manual, Cameo Inc.. Houston (1962) A2-001. U.S. Patent No. 2.339.487 (Jan. 1944). Fig. 5.7, from King, W.R.: “Time and V 0 Iumc Control for Gas Intermitters,” in Gas-Lift Technology,” API Drill. and Prod. Pruc. (I 959) 24-60. Fig. 5.21, from Kirkpatrick. C.V.: “Advances Fig. 5.25, from Gas Lt”, Book 6 of API Vocational Training Series. API. Dallas (1965) 109. Fig. 5.33, from CLlmco Cornplere Service Cuialog, Cameo Inc. (1962) 42. Determinations.”
Chap. 6 Figs. 6.1, 6.5, 6.7, 6.12, 6.13, 6.31, 6.40, 6.44, 6.47, 6.49, and 6.51, and Table 6.18, courtesy Gardena.
Trico
Industries.
CA,
Figs. 6.2, 6.3, 6.6, 6.8, 6.11, 6.14, 6.15, 6.19 through 6.24, 6.26 through 6.29, 6.32 through 6.39, 6.41 through 6.45, 6.48, 6.50, 6.52, 6.53, and 6.55, and Table 6.1, from National-Oilwell. Los Nietos. CA. Fig. 6.9, courtesy Otis Engineering Corp., Dallas. Figs. 6.17 and 6.52, and Tables 6.3, 6.12, and 6.17, courtesy Dresser Industries, Dallas. Fig. 6.18 and Table 6.4, courtesy of Highland Pump Co. Inc.. Midland. TX. Fig. 6.56, from Si;ing und Selecrion of Electric Submersible Pump Installations, API RP I IU, second edition, API. Dallas (May 30, 1986).
Table 6.2, courtesy
Kobe Inc.,
Huntington
Park,
CA.
Chap. 7 Figs. 7.1 through 7.18 and 7.20 through 7.32, and Table 7.1, courtesy Bartlesville.
TRW Energy
Products
Group,
Reda Pump
OK.
Chap. 8 Fig. 8.1, from Subsurface Pumps and Fitrings, API Spec. 11 AX, seventh edition, API, Dallas (June 1979). Figs. 8.3, 8.5, and 8.7, courtesy Oilwell Div. of U.S. Steel Corp., Garland, TX. V
Div.,
Chap. 9 Figs. 9.2 and 9.3, and Tables 9.1 through 9.4, from Sucker Rods. API Spcc. 119, 2lst editmn. API, Dallas (May 1985). Figs. 9.5 and 9.9, and Table 9.9, from Cure und Hundling of Sucker Rod.,, API RP 1 IBR. seventh edition. API. Dallas (May 30, 1986).
Fig. 9.10 and Tables 9.10 and 9.11, from Reir@ced I, 1986). Table 9.7, from Design
Culrulurions
Plu~fic Sucker Rods, API Spec.
for Sucker Rod P~inpini:
1 IC, first edition.
Systems,API RP I 1L. third edition,
API,
API,
Dallas
(Jan,
Dallas
(Feb.
1977)
Chap. IO Figs. 10.1, 10.3, 10.6, 10.7, 10.9 through 10.12, and 10.14 (pumping unit), courtesy Lufkin Industries Inc., Lufkin. TX. Fig. 10.8, from Design Calculations for Sucker Rod Pumping Sytems (Convenrional Units), API RP 1 IL. third edition. API. Dallas
(Feb.
1977).
Figs. 10.13, 10.16 through 10.20, and 10.24 through 10.28, and Tables 10.5, 10.7, and 10.9, from Sargent
Oil Well Odessa, TX. Fig. 10.14 (engine), from Arrow Specialty Co., Tulsa, OK. Fig. 10.15, from Waukesha Engine Div.. Dresser Industries Inc., Waukesha. WI. Fig. 10.21, from Mom-s and Generators, MG l-1978. Natl. Electrical Manufacturers Assn.. Washington. DC (1978). Figs. 10.29 through 10.31, from Ronk Electrical Industries Inc., Nokomis. IL. Figs. 10.32 and 10.33, from Classijcnlion of Areas for Electrical lnstullations at Drilling Rigs and Production Facilities on Land and on Marine Fixed and Mobile Platform, API RP 5009, second edition, API, Dallas (July 1973) 8. Tables 10.2 and 10.3, from lnsrullation and Luhrimtim of Pumping Units, API RP 1 IG, second edition. API. Dallas (Feb. 1959) and Supplement (Jan. 1980). Tables 10.6 and 10.10, from Motor Application and Muintenunce Hundbook, second edition, R.W. Smeaton (ed.), McGraw-Hill Book Co. Inc.. New York City, Table 1 on Page 3-7 and Table 3 on Page I l-3. Equipment
Co.,
Chap. 11 Figs. 11.1 and 11.3, from C-E Natco, Tulsa. OK. Fig. 11.4, from Design and Fuhricution of Gulvunixd
Products, American Hot Dip Galvanizer Assn. and the Zinc Inst. 1983). Fig. 11.7, from CBI Industries Inc. (Chicago Bridge and Iron Co.), Oak Brook, IL. Figs. 11.9 and 11.10, from Fenix & Scisson Inc., Tulsa. OK. Table 11.1, from Bolted Production Tanks, API Spec. 129, 12th edition, API Div. of Production, Dallas (Jan. 1977). Tables 11.3 and 11.4, from Venting Atmospheric cmd LowPressure Storage Tunk.7, API Std. 2000, third edition, API, Dallas (Jan. 1982). (Nov.
Chap. 12 Fig. 12.2, courtesy Jaragua S.A. Industrias Mechanicas. Sao Paula, Brazil. Figs. 12.7 and 12.8, courtesy Fisher Controls Co., Marshalltown. IA. Figs. 12.16 and 12.19, courtesy ACS Industries Inc., Woonsocket, RI. Fig. 12.18, courtesy Peerless Mfg. Co., Dallas. Fig. 12.20, courtesy Plenty Metrol. Newbury. England. Fig. 12.21, courtesy Vortec. Inc.. Woodside. CA. Fig. 12.22, courtesy Porta-Test Systems, Ltd., Edmonton, Alta., Canada. Figs. 12.24, 12.26, and 12.40, courtesy C-E Natco, Tulsa, OK. Tables 12.9 and 12.10, courtesy Cornsign Computer Program, Ellis Engineering Inc., Houston. Tables 12.11 and 12.17, from KWIC Index of Intl. Standards, Intl. Organization for Standardization. Geneva. Tables 12.12, 12.18, and 12.19, from ASME Boiler and Pressure Vessel Code, Sec. VIII, Div. 1, New York City (1984). Tables 12.13 and 12.14, from Megyesy, E.F.: Pressure Vessel Handbook, Pressure Vessel Handbook Publishing Inc., Tulsa,
OK.
Table 12.15, from Kimmell,
G.O.: “Stage Separation,” paper 48.PET-15 presented at the ASME Annual City, Oct. 1949. Table 12.16, “Separation Flash Calculations, Process Version 0882,” Simulation Sciences Inc., Houston.
Meeting.
Oklahoma
Chap. 13 Fig. 13.2, courtesy The Bristol Co. Fig. 13.3, from Ori’ce Constunt Tub/es. American Gas Assn., Report No. 3, revised (1969). Also, ANSI/API 2530. Fig. 13.4 and Tables 13.2a, 13.2b, and 13.4, from GPSA Engineering Dutubook, Gas Processors Suppliers Assn., Tulsa, OK (1972).
Figs. 13.20 through 13.22, courtesy Fischer Governor Table 13.1, courtesy American Meter Co.. Inc.
Co.
Chap. 14 Fig. 14.5, from GPSA Engineering
Dutuhook,
ninth edition.
fifth revision,
Gas Processors
Suppliers
Assn.,
Tulsa,
OK
(1981).
Fig. 14.14, from NGSMA Handbook. Figs. 14.19 through 14.21, and Tables 14.1 and 14.2 from Campbell, Processing.”
Campbell
Petroleum
Series,
Norman,
OK (1962) 2.
vi
J.M.:
“J.M.
Campbell
Gas Conditioning
and
Chap. 15 Figs. 15.1 through 15.3, and Table 15.9, from Desl,qn and hstd/don API RP l4E,
third edition,
API,
Dallas
(1981)
of O&how
Figs. 15.4 through 15.6, and Tables 15.2 through 15.5, from GPSA Engineerirlg Tulsa, OK (1980). Fig. 15.8, courtesy Paragon
P~C~CY;OH ~l+t~~
Pip;~
~~~~~~~~~~~
22. Durchx~k,
@IS Processors
Suppliers
Assn..
Engineering
Services
Inc..
Houston.
Fig. 15.11 and Table 15.10, courtesy Perry Equipment Co., Mineral Fig. 15.12, courtesy C-E Natco, Tulsa. OK. Fig. 15.13, courtesy U.S. Filter. Fluid System Corp.. Whittier, CA. Figs. 15.15 and 15.19, from “Oil-Water Separator Process Design.” Wastes, API. Dallas (1975) Chap. 5. Fig. 15.20, Engineering Spccialtiea Inc.. Covington. LA. Tables 15.6 and 15.7, from Amr~rictr~~ ~triiov7d .bmk~rd. York City (1981).
Wells,
TX.
API Manual
on Disposal
of Refinery
Wastes.
Volume
ANSI B26.5.
ASME,
New
on Liquid
Pip
/%mgr.s
arzd
F/m&
FirtirrRs.
Chap. 18 Fig. Fig. Fig. Fig.
18.32, 18.36, 18.38, 18.40,
Technology
Fig. Fig. Fig. Fig.
18.41, 18.43, 18.44, 18.45,
courtesy
CanOcean
Resources Ltd., New Westminster, B.C., Canada. Services. Irvine. CA. courtesy Hamilton Bros. Oil Co., Denver. from Lagers, G.H.C., Gusto, B.V., and Bell, C.R.: “The Third Generation Lay Barge.” Proc., Conference (1974) 1, 35-46. courtesy Apache, Santa Fe Intl. Corp., Alhambra. CA. courtesy Swan Wooster Engineering Ltd., Vancouver, B.C., Canada. from Willits. K.L.: “Well Completions in the Prudhoc Bay Field.” Pet. Eng. (Feb. 1976). courtesy Brian Watt Assocs., Houston.
courtesy Fluor Subsea
Offshore
Chap. 19 Figs. 19.1, 19.3, and 19.6 through 19.8, courtesy Shell Development Co., Houston. Figs. 19.4, 19.5, 19.9, and 19.10, courtesy Baker Performance Chemicals Inc., Santa Fe Springs, Fig. 19.12, courtesy ASTM, Philadelphia. PA. Fig. 19.17, courtesy Chemineer-Kenics. Dayton. OH. Fig. 19.18, courtesy Modular Production Equipment Inc., Houston. Figs. 19.19, 19.29, and 19.30, courtesy C-E Natco Inc.. Tulsa, OK. Figs. 19.20 and 19.32, courtesy Hydrocarbon Research Inc.. Long Beach, CA. Figs. 19.21, 19.22, and 19.28, courtesy Energy Recovery Div., Daniel Industries Inc.
CA
Chap. 20
of Nutuuu/ Gus Eng;nrcr;ng, McGraw-Hill Book Co. Inc., New York City (1959). Figs. 20.2B and 20.2C, from Brown, G.G. ~1 nl.: “Natural Gasoline and the Volatile Hydrocarbons.” Natural Gas Assn. of America. Tulsa OK (1948). Factor for Sour Natural Gases,” Cdn. J. C!zerrr. Gl,q. (1972) Fig. 20.4, from Wichert, E. and Aziz. K.: “Compressibility 49, 269-75. Figs. 20.8 and 20.9, from Stiel. L.I. and Thodos, G.: “The Viscosity of Non-Polar Gases at Normal Pressures.” AICIfE J. (1961) 7, 61 l-20. Proc~. , Natural Gas Fig. 20.10, from Matthews, T.A.. Roland. C H.. and Katz, D.L.: “High Pressure Gas Measurement.” A$sn. of America (1942) 41-51. Fig. 20.14 and Table 20.1, from Perry. R.H. and Chilton, C.H.: C/~cwicz/ 0tgin~er.s ffmdbook. fifth edition. McGrawHill Book Co Inc., New York City (1975). Table 20.2, from GPSA Enyi~~wriufi Dorcrbonk, ninth edition. fifth revision. Gas Processors Suppliers Aasn.. Tulsa. OK, Figs. 20.2A and 20.3, from Katz, D.L. ef (il.: Hcr!rdhook
Chau. 21 Fig. 21 .l, from Gq~~/oym/ic~ c$ C/ic,n~ic,tr/ T~~c~/tno/o,e~,The Interscicnce Encyclopedia Inc. ( 1953) 10, 1 17. Fig. 21.3, after N&on. W.L.: Parrnlertr?~ Rc$rrrj:v ~ri,t~irt~~~ri/t~, fourth edition, McGraw-Hill Book Co Inc., New York City (1958)
910-37.
Fig. 21.4, courtesy Hansen. D.N. and Hurd. C.O., Shell Devolopmcnt Co , Prtrd~wrn Rc$wr (Aprtl 1945). Figs. 21.7 through 21.21, from ASTM Slcrf&rcl.c 011 Pt,/ro/c~trfi P,.oc/lrc~f.s crnd Lubricants. Part 24, ASTM, Philadelphia ( 1975) 796.
Fig. 21.22, from Matthews.
Proc,., Natural Gas T.A.. Roland. C.H.. and Katz. D.L: “High Prcssurc Gas Measurements.” (1942) 41. r!f’Oil Fir/t/ Hwlrr,c&~orr S\stc~rns, Reinhold Figs. 21.23 and 21.24. from Standing. M. B. : l’r~lrr/tif,/rrc, t/rid Phcrsr Brhcr~~io~ Publtshing Corp.. New York City (1952). Fig. 21.25, from Standing. M.13.: “A Prcssurc-Volulnc-Tcmpcraturc Correlation for Mixtures of California Oil and Gases.” Drill. curd Prod. Pm , API ( 1937) 275. Fig. 21.26, courtesy Calitornia Rcjcarch Corp., 1947. ‘Fable 2 I .7, from Nelson. W. L. : Pr~f-oic,lr!~r Rc:/iucy\ En,g;n~criyy, fourth edition, McGrawHill Book Co. Inc.. New York City (11)5X) 910-37. Table 21.10, from “A Guide to World Export Ct-udcs.” Oil & Gtrv J. (1976). Table 21.11, courtesy Bartlcavillc Energy Technology Ccntcr. Bartlc~ville. OK. Aasn. of America
vii
Chau. 22 Figs. 22.1 through 22.3, from Standing,
M.B.: Volumetric and Phase Behavior of Oil Field Hydrocarbon Systems, Reinhold Publishing Corp., New York City (1952). Fig. 22.4, from Katz, D.L.: “Prediction of the Shrinkage of Crude Oils,” Drill. and Prod. Prac., API (1942). Figs. 22.5, 22.9, and 22.13, courtesy California Research Corp. Figs. 22.19 and 22.20, from Baker, 0. and Swerdloff, W.: “Finding Surface Tension of Hydrocarbon Liquids,” Oil & Gas 1. (Jan. 2, 1956).
Chap. 23 Fig. 23.9 from GPSA Engineering Databook, Gas Processors Suppliers Assn., ninth edition, Tulsa, OK (1972). Systems,” Figs. 23.12 and 23.13 from Reamer, H.H., Fiskin, J.M., and Sage, B.H.: “Phase Equilibria in Hydrocarbon lnd. Eng. Chem. (Dec. 1949) 41, 2871.
Chao. 24 Fig. 24.3,
from Hoke, S.H. and Collins, A.G.: Mobile Wellhead Analyzerfor Oil-Field Waters, ASTM STP 735 (1981) 34-48. Fig. 24.9, from Burcik: Properties of Petroleum Reservoir Fluids, John Wiley Figs. 24.11 and 24.12, from PI-Petroleum Information,
the Determination & Sons Inc.,
of Unstable
Constituents
in
New York City (1957).
Chap. 25 Figs. 25.3 and 25.4, from Kobayashi, R.: “Vapor-Liquid dissertation, U. of Michigan, Ann Arbor (1951).
Equilibria
in Binary
Hydrocarbon-Water
Systems,”
PhD
Figs. 25.5, 25.10, 25.21, 25.23, and 25.24, and Table 25.4, from Katz, D.L. et al.: “Water-Hydrocarbon
Systems,” Gas Engineering, McGraw-Hill Book Co. Inc., New York City (1959) 189-221. Figs. 25.6, 25.8, and 25.33, from Kobayashi, R. and Katz, D.L.: “Vapor-Liquid Equilibria for Binary Hydrocarbon-Water Systems,” Ind. Erg. Chem. (1953) 45, 440-5 1. Fig. 25.7, from Alder, S.B. and Spencer, C.F.: “Case Studies of Industrial Problems, Phase Equilibria and Fluid Properties Proc., Equilibrium Fluid Properties in the Chemical Industry (1980) 465-95. in the Chemical Industry,” Fig. 25.14, from von Stackelberg, M.: “Solid Gas Hydrates,” Natunvissenschaften (1949) 36, 327-33, 359-62. Figs. 25.17 through 25.20, from Sloan, E.D.: “Phase Equilibria of Natural Gas Hydrates,” paper 67f presented at the 1983 AIChE Summer Natl. Meeting, Denver, Aug. 28-31. Fig. 25.22, from Song, K.Y. and Kobayashi, R.: “Measurement and Interpretation of the Water Content of a MethanePropane Mixture in the Gaseous State in Equilibrium with Hydrate,” Ind. Eng. Chem. Fund. (1982) 21, No. 4, 391-95. Fig. 25.25, from Deaton, W.J. and Frost, E.M.: Gas Hydrates and Their Relation to the Operation of Natural Gas Pipe 8, USBM, Washington, DC (1946). Lines, Monograph Fig. 25.30, from Saito, S., Marshall, D.R., and Kobayashi, R.L: “Hydrates at High Pressures: Part II. Application of AIChE J. (1964) 10, No. 5, Statistical Mechanics to the Study of the Hydrates of Methane, Argon, and Nitrogen,” 734-40. Fig. 25.32, from Dodson, CR. and Standing, M.B.: “Pressure-Volume-Temperature and Solubility Relations for Natural Gas-Water Mixtures,” Drill. and Prod. Prac., API, Dallas (1944) 173-79. Figs. 25.34 through 25.36, from Peng, D.-Y. and Robinson, D.B.: “Two- and Three-Phase Equilibrium Calculations for Coal Gasification and Related Process,” Thermodynamics of Aqueous Systems with Industrial Applications, S.A. Newman (ed.), Symposium Series 133. ACS (1980) 393-414. Figs. 25.37 and 25.41, from Scauzillo, F.R.: “Inhibiting Hydrate Formations in Hydrocarbon Gases,” Chem. Eng. Progr. (1956) 52, No. 8, 324-28. Figs. 25.38 through 25.40, from Gas Conditioning Fact Book, Dow Chemical Co., Midland, MI (1962) 69-71, Table 25.5, from Dharmawardhand, P.B.: “The Measurement of the Thermodynamic Parameters of the Hydrate Structure and Application of Them in the Prediction of Natural Gas Hydrates,” PhD dissertation, Colorado School of Mines, Golden (1980). Handbook
of Natural
Chap. 26 Fig. 26.1, from Fraser,
H.J. and Graton, L.C.: “Systematic Packing of Spheres-With Particular Relation to Porosity and J. Geol. (Nov.-Dec. 1935) 785-909. Figs. 26.3 and 26.30, courtesy Core Laboratories Inc., Dallas. Fig. 26.5, 26.24, and 26.25, from Stevens, A.B.: A Laboratory Manual for Petroleum Engineering 308, Texas A&M U., College Station (1954). Fig. 26.7, from Krumbein, W.C. and Sloss, L.L.: Stratigraphy and Sedimentation, Appleton-Century-Crofts Inc., New York City (1951) 218. Fig. 26.27, from Klinkenberg, L.J.: “The Permeability of Porous Media to Liquids and Gases,” Drill. and Prod. Prac., API, Dallas (1941) 200-13. Fig. 26.29, from Kennedy, H.T., VanMeter, O.E., and Jones, R.G.: “Saturation Determination of Rotary Cores,” Pet. Eng. (Jan. 1954) B.52-B.64. Permeability,”
Chap. 27 Table 27.12, courtesy Alaska Oil & Gas Conservation Commission, Anchorage. Tables 27.13 through 27.15 and 27.17, courtesy Core Laboratories Inc., Dallas. Table 27.16, from European Continental shelf Guide, Oilfield Publications Ltd., Ledbury,
Herefordshire,
England
(1982).
Chap. 28 Figs. 28.3 and 28.4, from Rose. W.: U.S. Patent No. 4,506,542 (1985). Fig. 28.7, from Rose. W.: “Permeability and Gas Slippage Phenomena.”
Drill.
and Prod.
Pruc.,
API.
DalIah (1948)
127-35.
Fig. 28.8, from Stone. H.L.:
“Probability Model for Estimating Three-Phase Relative Permeability.” J. Ccl,z. P<,t. Tech. 1973) 53-59. Fig. 28.12, from Panteleev. V.G. et ctl.: “Influence of Carbon Dioxide on Three Phase Permeability by Oil and Water,” Nej?eprom.wlowe de10 (1973) No. 6. I l-13. Fig. 28.16, from Ashford. F.E.: “Determination of Two Phase and Multiphase Relative Permeability for Drainage and lmbibition Cycles Based on Capillary Pressure Measurement,” Revisru Tecnicu Intevep (198 1) 1, 71-94. Fig. 28.19, from Lin, C. and Slattery. J.C.: “Three-Dimensional. Randomized, Network Model for Two-Phase Flow Through Porous Media.” AlChE J. (1982) 28, No. 2, 311-24. (Oct.
Chau. 29 Figs. 29.1 through 29.3, from Galloway, T.J.: Bull. 118, California Div. of Mines, Sacramento (Aug. 1957). Fig. 29.6, from Sams. H.: “Atkinson Field. Good Example of ‘Subtle Stratigraphic Trap,’ ” Oil & Gas .I. (Aug.
12. 1974)
145-63.
Fig. 29.7, from Hoyt. W.V.:
“Erosional Channel in the Middle Wilcox Near Yoakum. Lavaca County. Texas,” Trrlrt~. Gulf Coast Assn. of Geological Societies (Nov. 1959) 9, 41-50. Fig. 29.8, from Pirson, S.J.: Oil Reservoir EnRinerring, second edition, McGraw-Hill Book Co. Inc., New York City (1958). Figs. 29.9 and 29.10, from “Occurrence of Oil and Gas in Northeast Texas,” F.A. Herald (ed.). Bureau of Economic Geology and East Texas Geological Sot. (April 1951). Fig. 29.11, from An Infrod~rction to Gulf‘ Cousf Oil Fields, Houston Geological Sot., Houston (1941). Fig. 29.12, from A Guide Book, Houston Geological Sot.. Houston (1953).
Chap. 30 Tables 30.1 through 30.4, from Bergman, Measurement
Systems.”
Schlumberger
J.C., Gulmard, A., and Hagenar, Well Services, Houston (1980) 10.
D.S.:
“High
Performance
Pressure
Chao. 31 Fig. 31.1, from Clijnutu/ogicul
Dutu in the United Slates.
U.S. Weather
Bureau,
Washington,
DC
Chap. 32 Fig. 32.1, from the Railroad Commission of Texas, Austin. Figs. 32.2 and 32.3, from Calhoun, J.C. Jr.: Fundamentals Press.
Norman
Figs. 32.10 and 32.11, from “Turbine Meters,” Fig. 32.12, from API Measurement of Perroleum edition
(Aug.
of Reservoir
Engineering,
revised
edition,
U. of Oklahoma
(1953). API Manual of Petroleum Measurement Standurd.T, Chap. 5. Sec. 3. Liquid Hydrocarbons by Positive Displuccment Meter, API Std. IlO1,
first
1960).
Chap. 33 Table 33.7, from Rawlins, to Production
Practices,”
E.L. and Schellhardt. M.A.: “Back-pressure Data on Natural USBM Monograph, Washington. DC (1935).
Gas Wells and Their
Application
Chap. 34 Fig. 34.2, from Moody, L.F.: “Friction Factors for Pipe Flow,” Trans., ASME (1944) 66, 671. Fig. 34.3, from Brown. G.G. et al.: Nutural Gusohe and the Volatile Hydrocarbons, Natural Gas Assn. of America (1948).
Fig. 34.4, from Nisle, R.G. and Poettmann,
F.H.: “Calculation of the Flow and Storage of Natural Gas in Pipe,” Per Enx. I. D-14; No. 2, C-36; No. 3, D-37. Figs. 34.8 and 34.9, from Griffith, P. and Wallis, G.B.: “Two-Phase Slug Flow,” J. Heur Transfer (Aug. 1961) 307-20: Trans., ASME. Figs. 34.11 and 34.12, from Poettmann, F.H. and Carpenter, P.G.: “Multiphase Flow of Gas, Oil, and Water Through Drill. und Prod. Pruc., API (1952) Vertical Flow Strings with Application to the Design of Gas-Lift Installations,” 257-3 17. Figs. 34.13 through 34.17, from Davis, G.J. and Weidner, C.R.: “Investigation of the Air Lift Pump,” Bull., Eng. Series, U. of Wisconsin (191 I) 6, No. 7. Figs. 34.23 through 34.25, from Poettmann, F.H. and Beck, R.L.: “New Charts Developed to Predict Gas-Liquid Flow World Oil (March 1963) 95-101. Through Chokes,” Table 34.7, from Rawlins, E.L. and Schellhardt, M.A.: “Back-Pressure Data on Natural Gas Wells and Their Application Monograph Series, USBM (1936) 7. to Production Practices,” (1955)
27, No.
Chap. 36 Fig. 36.9, from Dahm, Gulf of Thailand-A
C.G. and Graebner. R.J.: GeophvJics Case History.”
“Field (Feb.
Development With Three-Dimensional 1982) 149-76.
ix
Seismic
Methods
in the
Chap. 37 Fig. 37.6 and 37.7, from Tarncr,
J., “How Different Sire Gas Caps and Pressure Maintenance Programs Affect Amount Oil Week!\~(June 12. 1944) 32-44. Figs. 37.16 through 37.24, and Tables 37.1 and 37.2, from Singh. D. and Guerrero. E.T.: “Material Balance Equation Oil & Gas .I. (Oct. 20. 1969) 95-102. Sensitivity,” Producing Volatile Oil Reservoirs.” Workl Oil (April 1979) Figs. 37.29 and 37.30, from Cronquist, C.: “Evaluating 159-66 and 246. Recoverable
ot
Oil.”
Chao. 39 Figs. 39.1 through 39.3, and Table 39.1, after Eilerts. Gas Assn.,
K.C.
er ~1.: Phusr
Rr/ution.s of Gas-Co,l~lenscite
F1ui~l.s. American
New York City (1957).
Figs. 39.4 through 39.6, and Tables 39.2 through 39.10, courtesy Core Laboratories Inc., Dallas (1985). Fig. 39.7, after Marshall. D.L. and Oliver, L.R.: “Some Uses and Limitations of Model Studies in Cycling.” (1948) 174, 67-87. Fig. 39.8, after Stelzer, R.B.: “Model Prod. Pruc., API (1956) 336-42. Fig. 39.9, data derived from Stelzer, Reservoir.” Drill. and Prod. Prac., Table 39.12, from Miller, M.G. and Project. New Methods of Predicting Prac., API (1946) 128849.
Trcrns.,
AIME
Study vs. Field Performance,
Cycling
the Paluxy
Condensate
Reservoir,”
Drill.
trrrrl
Cycling the Paluxy Condensate R.B.: “Model Study vs. Field Performance, API (1956) 336-42. Lents. M.R.: “Performance of Bodcaw Reservoir, Cotton Valley Field Cycling Gas-Condensate Reservoir Performance Under Cycling Operations.” Drill. wzd Prod.
chap. 41 Table 41.11, courtesy Republic Bank of Dallas. Table 41.14. from Wilson. W.W. and Boyd. W.L.:
“Simplified
Calculations
Determine
Loan Payout.”
World Oil (May
1958).
Chao. 44 Figs. 44.6 through 44.8 and Table 44.2, from Craft,
B.C. and Hawkins, M.J. Jr.: Applied Pc~troleum Reservoir Inc., Englewood Cliffs, NJ (1959) 107, 357, 412-13. Figs. 44.58 through 44.61, from Guerrero. E.T. and Earlougher, R.C.: “Analysis and Comparison of Five Methods Used Drill. and Prod. Prac., API, Dallas (I 961) 78-95. to Predict Waterflooding Reserves and Performance,” Fig. 44.62, from Higgins, R.V. and Leighton. A.J.: “Computer Techniques for Predicting Three-Phase Flow in Five-Spot Waterfloods,” RI 7011. USBM (Aug. 1967). Engineering,
Prentice-Hall
Chap. 45 from Brown, G.G. et al.: “Natural Gasoline and the Volatile Hydrocarbons,” Natural Gasoline Assn. of (1948). Fig. 45.5, from Hutchinson, C.A. Jr. and Braun, P.H.: “Phase Relations of Miscible Displacement in Oil Recovery.” AIChE J. (1961) 7, 64. Fig. 45.7, modified from Slobod, R.L. and Koch, H.A. Jr.: “High Pressure Gas Injection-Mechanism of Recovery Drill. and Prod. Prac., API, Dallas (1953) 82. Increase,” Fig. 45.8, modified from Sage B.H and Lacey, W.N.: Some Properties of the Lighter Hydrocarbons, Hydrogen Suljde, Research Project 37, API, Dallas (1955). Carbon Dioxide, Monograph
Fig. 45.4, America
and
Chap. 46 Fig. 46.1, from Farouq
Ali, S.M.: “Steam Injection, Secondary and Tertiary Oil Recovery Processes,” Interstate Oil Commission, Oklahoma City (Sept. 1974) 148. Fig. 46.2, from McNeil, M.S. and Moss, J.T.: “Oil Recovery by In-Situ Combustion,” Pet. Eng. (July 1958) B-29-B-42. Fig. 46.5, from Smith, R.W. and Perkins. T.K.: “Experimental and Numerical Simulation Studies of the Wet Combustion Recovery Process,” J. Cdn. Pet. Tech. (July-Sept. 1973) 44454. Fig. 46.34, from Mace. C.: “Deepest Combustion Project Proceeding Successfully,” Oil & Gus J. (Nov. 17, 1975) 74-81. Fig. 46.59, from Poettmann. F.H. and Mayland, B.J.: “Equilibrium Constants for High Boiling Hydrocarbon Fractures of Pet. Refiner (July 1949) 101ll2. Varying Characterization Factors,” Tables 46.1 through 46.6, from “Steam Dominates Enhanced Oil Recovery,” Oil & Gas J. (April 5, 1982) 139-59. Table 46.31, from “1967 ASTM Steam Tables,” ASME. New York City (1967). Compact
Chap. 47 Figs. 47.1, 47.12, and 47.26, from U.S. DOE: drawing by J. Lindley, Bartlesville, OK. Fig. 47.3, from Mungan, N.: Rev. Inst. Fr. Pet., Editions Technip, Paris (1969) 24, 232. Fig. 47.4, from Tsaur, K.: “A Study of PolymeriSurfactant Interactions for Micellar/Polymer
Flooding Applications,” MS U. of Texas, Austin (1978). Fig. 47.5, from Martin, F.D., Donaruma, L.G., and Hatch, M.J.: “Development of Improved Mobility Control Agents for SurfactantiPolymer Flooding,” second annual report, Contract No. DOEiBCiOCO013, U.S. DOE (Oct. 1980). Fig. 47.8, from Overbeck, J.Th.G.: “Colloids and Surface Chemistry. A Self-Study Subject Guide. Part 2, Lyophobic Colloids,” Bull., Center for Advanced Engineering, Massachusetts Inst. of Technology, Cambridge, MA (1972). Fig. 47.9, from Khan. S.A.: “The Flow of Foam Through Porous Media,” MS thesis, Stanford U., Stanford, CA (1965). thesis.
Fig. 47.19, from Recd. R.L. and Healy,
R.N.: “Some Physico-Chemical Aspects of Microemulsion Flooding: A Review.” Improved Oil Recovery by Sutjticttmt and Polwner Flooding, D.O. Shah and R.S. Schechter (eds.), Academic Press, New York City (1977) 383-438. Fig. 47.20, from Harwell. J.H.: “Surfactant Adsorption and Chromatographic Movement with Application in Enhanced Oil Recovery.” PhD dissertation, U. of Texas, Austin (1983). Fig. 47.23, from Lake, L.W. and Pope, G.A.: “Status of Micellar-Polymer Field Tests,” Pet. Eng. Intl. (Nov. 1979) 51, 38-60. Fig. 47.27, from Minssieux, L.: “Waterflood Improvement by Means of Alkaline Water,” Enhunced Oil Recovery by Displacement wifh Saline Solutions, Kogan Page Ltd., London (1979) 75-90; courtesy BP Trading Co. Ltd. Table 47.1, from Manning, R.K., Pope, G.A., and Lake, L.W.: “A Technical Survey of Polymer Flooding Projects,” Contract No. DOE/BETC/l0327-19, U.S. DOE (Sept. 1983). Table 47.2, from Akstinat, M.H.: “Surfactants for WOR Process in High-salinity Systems: ‘Product selection and evaluation,’ ” Enhanced Oi/ Recovery, Elsevier Scientific Publishing Co., New York City (1981).
Chap. 49 Figs. 49.9, 49.10, 49.19 through 49.22, 49.25 through 49.30, and 49.34, from Log Interpretation Schlumberger
Well Services,
Principles,
Vol.
1,
Houston.
Figs. 49.42 through 49.44 and Table 49.2, from Calver,
J:C.. Rau, R., and Wells, L.: “Electromagnetic Propagation-A Schlumberger Well Services, Houston. in Logging,” Figs. 49.46 and 49.47, from Best, D.L., Gardner. J.S., and Dumanoir, J.L.: “A Computer-Processed Wellsite Log paper presented at the 1978 SPWLA Annual Logging Symposium, June 13-16. Computation,” Fig. 49.48, from Coates, G.R., Schulze, R.P., and Throop, W.H.: “VOLAN*-An Advanced Computational Log paper presented at the 1982 SPWLA Annual Logging Symposium, July 6-9. Analysis,” Tables 49.1 and 49.3 through 49.6, from Bateman. R.M., Log Qunlir?, Control, IHRDC, Boston, 1984. New Dimension
Chap. 50 Figs. 50.5 and 50.6, from Evans, R.D.: 7’he Aromic Nucleus, McGraw-Hill Book Co. Inc., New York City (1967) 426-38. Figs. 50.9, 50.21, 50.30, 50.32 through 50.34, 50.40, 50.43, 50.50, and 50.51, courtesy Schlumberger Well Services. Houston.
Fig. 50.18, from Tidman,
J.: “Geophysical Well Logging.” excerpts from Methods in Experimental Phyic.\: Physics, 24. Figs. 50.22 and 50.36, from Schlumberger Log Interpretation Charts, Schlumberger Well Services, Houston. 1984. Figs. 50.23, 50.24, and 50.26, from Edmundson, H. and Raymer, L.L.: “Radioactive Logging Parameters for Common Minerals.” paper presented at the 1979 SPWLA Annual Logging Symposium, Tulsa, June 3-h. Fig. 50.29, from Hertzog, R.C. and Plasek, R.E.: “Neutron-Excited Gamma-Ray Spectrometry for Well Logging.” IEEE Trms. NM. Sti. (Feb. 1979) NS-26, No. 1, Fig. 50.46, Arnold, D.M. and Smith, H.D. Jr.: “Experimental Determination of Environmental Corrections for a DualSpaced Neutron Porosity Log,” paper W presented at the 1981 SPWLA Annual Logging Symposium, Mexico City, June 23-26. Fig. 50.47, from Schlumbergcr Chart Book, Schlumberger Well Services, Houston (1977). Table 50.3, from Bcrtuzzi. W., Ellis. D.V., and Wahl. J.S.: “The Physical Foundation of Formation Lithology Logging with Gamma Rays,” Geophy.siu (Oct. 1981) 46, No. 10. Academic
Press
(1986)
Chap. 51 Fig. 51.2, from Sears, (1955)
F.W.
and Zemansky,
M.W.:
Unirwsi@
Physics,
Addison-Wesley
Publishing
Co. Inc.,
Reading.
MA
1031.
Figs. 51.3 and 51.4, from Krautkramer,
J. and Krautkramer, H.: Ultrasonic Testing ofA4ateriais, Springer-Verlag. New 521. Figs. 51.6 and 51.71, from Timur. A.: “Rock Physics,” The Arabian J. Sri. Eng. Special Issue (1978) 5-30. Figs. 51.7 and 51.15, from Timur. A.: “Temperature Dependence of Compressional and Shear Wave Velocities in Rocks,” Groph~sics (1977) 42, 950-56. Figs. 51.8 and 51.9 and Table 51.2, from Jones, S.B., Thompson, D.D., and Timur. A.: “A Unified Investigation of paper presented at the Rock Mechanics Conference, Vail, CO (1976). Elastic Wave Propagation in Crustal Rocks,” of Seismic Waves in Dry and Saturated Fig. 51.10, from Johnston. D.H., Toksoz. M.N., and Timur, A.: “Attenuation Grophvsics ( 1979) 44, 69 l-7 1 I Rocks: Part II: Theoretical Models and Mechanism.” Fig. 51.11, from Wyllie, M.R.J.. Gardner, G.H.F., and Gregory, A.R.: “Studies of Elastic Wave Attenuation in Porous Media.” Geophysics (1962) 27, 269. Figs. 51.12 through 51.14, from Gardner. G.H.F., Gardner, L.W.R., and Gregory, A.R.: “Formation Velocity and Density-The Diagnostic Basics for Stratigraphic Traps,” Geophysics (1974) 39, 770-80. Fig. 51.16, from Timur, A.: “Velocities of Compressional Waves in Porous Media at Permafrost Temperatures,” Geophysics (1968) 33, 584-96. Figs. 51.17, 51.19, and 51.21, from Toksoz, M.N., Cheng. C.H., and Timur, A.: “Velocities of Seismic Waves in Porous Rocks,” Geoph?sirs ( 1976) 41, 62 l-45. Fig. 51.17, from King, M.S.: “Wave Velocities in Rocks as a Function of Changes in Overburden Pressure and Pore Fluid Saturants.” Geophysics (1966) 31, 50-73. Fig. 51.18, Gregory, A.R.: “Fluid Saturation Effect\ on Dynamic Elastic Properties of Sedimentary Rocks.” Geophysics York City (1969)
(1976) 41, 895-921. Fig. 51.20, from Timur. Systems
in Rocks.”
A.. Hempkins. W.B., J. Geophy. Res. (1971)
and Weinbrandt. R.M.: 76, No. 20, 4932-48.
xi
“Scanning
Electron
Microscope
Study of Pore
Figs. 51.22, 51.37, 51.50, and 51.94, from Gcycr.
R.L. and Myung, J.I.: “The 3-D Velocity Log: a Tool for In-Situ Determination of the Elastic Moduli of Rocks.” Proc., Twelfth Symposium on Rock Dynamic Rock Mechanics, Mechanics (1971) 71-107. Figs. 51.23 and 51.24, from Minear, J.W. and Fletcher, C.R.: “Full-Wave Acoustic Logging,” Tr0n.c.) SPWLA (1983) paper EE. Fig. 51.25, from Cheng. C.H. and Toksoz, M.N.: “Elastic Wave Propagation in a Fluid-Filled Borchole and Synthetic Acoustic Logs,” Geophysics (1981) 46, 1042-S3. Fig. 51.26, from Cheng. C.H. and Toksoz. M.N.: “Generation, Propagation and Analysis of Tube Waves in a Borehole,” Trans., SPWLA (1982) paper P. Figs. 51.27, 51.28, 51.31, and 51.46, from Thomas, D.H.: “Seismic Applications of Sonic Logs,” The Log Analwt (Jan.Feb. 1977) 23-32. Figs. 51.29 and 51.33, from Lynch, E.J.: Forrnutiorz Evu/uurwn, Harper and Row, New York City (1962) 422. Figs. 51.36 and 51.77, from Ausburn, J.R.: “Well Log Editing in Support of Detailed Seismic Studies,” Trans., SPWLA (1977) paper F. Figs. 51.39 and 51.42, from Goetz, J.F., Dupal. L., and Bowler, J.: “An Investigation into Discrepancies Between Sonic Log and Seismic Check Shot Velocities, Part I,” APEA J. (1979) 19, 131-41. Fig. 51.40, from Ransom, R.C.: “Methods Based on Density and Neutron Well-Logging Responses to Distinguish Characteristics of Shaly Sandstone Reservoir Rock,” The Log Analyst (May-June 1977) 18, 47-62. Figs. 51.41, 51.43, 51.44, and 51.48, from “The Long Spaciflg So&,” Schlumberger technical pamphlet (1980). Fig. 51.45, from Misk, A. ef a/.: “Effects of Hole Conditions on Log Measurements and Formation Evaluation,” SAID, Third Annual Logging Symposium (June 1976). Figs. 51.47 and 51.49, from “The Long Spacing Sonic,” Schlumberger technical pamphlet (1982). Fig. 51.56, from Parks. T.W., McClellan, J.H., and Morris. C.F.: “Algorithms for Full-Waveform Sonic Logging,” paper presented at the 1983 IEEE-ASSP Workshop on Spectral Estimation. Fig. 51.58, from Wiley. R.: “Borehole Televiewer-Revisited.” Trans., SPWLA (1980) 21, paper HH. Fig. 51.60, from “Seisviewer Logging,” Birdwell, Div. of Seismograph Service Corp.. technical pamphlet (1981). Fig. 51.61, from Broding, R.A.: “Volumetric Scanning Well Logging,” Trans., SPWLA (1981) 22, paper B. Fig. 51.63, from “Log Interpretation Charts.” Schlumberger (1979). Fig. 51.65, from “Evaluaci6n de Formaciones en la Argentina,” Schlumberger (1973) 9455. Fig. 51.66, from Raymer, L.L.. Hunt, E.R., and Gardner, J-S.: “An Improved Sonic Transit Time-To-Porosity Transform.” Trms., SPWLA (1980) paper P. Fig. 51.67, from Hartley. K.B.: “Factors Affecting Sandstone Acoustic Compressional Velocities and An Examination of Empirical Correlations Between Velocities and Porosities,” Tram, SPWLA (1981) paper PP. Figs. 51.70 and 51.72, from Nations, J.F.: “Lithology and Porosity from Acoustic Shear and Comprcssional Wave Transit Time Relationships,” Trms., SPWLA 18th Annual Logging Symposium (June 1974). Fig. 51.73 and 51.74, from Gardner. G.H.F. and Harris, M.H.: “Velocity and Attenuation of Elastic Waves in Sands.” Trans.. SPWLA (1968) 9, paper M. Fig. 51.75, from Arditty. P.C.. Ahrens, G., and Staron, Ph.: “EVA: A Long Spacing Sonic Tool for Evaluation of Velocities and Attenuation.” paper presented at the 1981 SEG Annual Meeting, Los Angeles. Fig. 51.76, from Domenico. S.N.: “Effect of Brine-Gas Mixture on Velocity in an Unconsolidated Sand Reservoir.” Thr Log A~~nl~st (1977) 18, 38-46. Figs. 51.78 and 51.79, from Kithas. B.A.: “Lithology, Gas Detection, and Rock Properties from Acoustic Logging Systems,” Trcrns., SPWLA (1976) 17, paper R. Figs. 51.80 and 51.81, from Laws. W.R.. Edwards. C.A.M., and Wichmann, P.A.: “A Study of the Acoustic and Density Changes Associated with High-Amplitude Events on Seismic Data.” Trans., SPWLA (1974) 15, paper D. Figs. 51.83 and 51.84, from Herring, E.A.: “North Sea Abnormal Pressures Determined from Logs,” Per. Eng. (1973) 45, 72-84. Figs. 51.85 through 51.89, from “Acoustic Cement Bond Log,” Dresser Atlas technical pamphlet (I 979) 20. Figs. 51.90 and 51.92, from “Cement Bond Evaluation in Cased Holes Through 3-D Velocity Logging,” Birdwell technical pamphlet (1978) 12. Fig. 51.91, from “Cement Evaluation Tool,” Schlumberger technical pamphlet (1983). Fig. 51.96, from Walker. T.: “Acoustic Character of Unconsolidated Sand,” Welcx paper (1971). Fig. 51.97, from Myung. J.I. and Baltosser. R.W.: “Fracture Evaluation by the Borehole Logging Method.” Stuhi& Rock Sloprs. Thirteenth Symposium on Rock Mechanics (1972) 31-56. Figs. 51.98 and 51.99, from Taylor, T.J.: “Interpretation and Application of Borehole Televicwer Surveys.” Tram., SPWLA (1983) 24, paper QQ. Fig. 51.100, from Williams. D.M. et (II.: “The Long Spacing Acoustic Logging Tool,” Trans., SPWLA (1984) 25, paper T. Table 51.1, from Timur. A.: “Application of Acoustic Wave Propagation Methods to Evaluation and Production of Hydrocarbon Rcscrvoirs,” Pm-, IEEE Ultrasonic Symposium, Dallas (1984). Table 51.3, from Guyod. H. and Shane. L.E.: Geophysical Well Logging, Hubert Guyod, Houston (1969) I, 256; and Wyllic, M.R.J.. Gregory, A.R.. and Gardner. G.H.F.: “Elastic Wave Velocities in Heterogeneous and Porous Media,” Geophysic~s (1956) 21, 41-70. Chap. Figs. Figs.
52 52.1 and 52.2,
from MS-196,
Exploration
Logging
Inc.,
Sacramento,
CA (1979).
52.3 through 52.12 and 52.22 and Table 52.1, courtesy Exploration Logging Inc., Sacramento, CA. Figs. 52.13, 52.14, 52.16, 52.17, and 52.19 through 52.21, from MS-156, Exploration Logging Inc.. Sacramento,
(1981). Figs. 52.15 and 52.18, from AV-6. Exploration Logging Inc.. Sacramento. CA (1980). Fig. 52.23, from AV-13. Exploration Logging Inc.. Sacramento. CA (1982). xii
CA
Chap. 53 Anadrill Logging Unit, Schlumherger. Fig. 53.3, from “Measurement While Drilling, Technical Specifications.” Fig. 53.7 and Table 53.2, from Log Qualify Conrrol Munurri. Vizilog Inc., Houston. Figs. 53.9 through 53.11, from Dipme/er InferpretLltion~Vol. I, Fundamentals, Schlumberger, Houston (1981). Offshore Services, Fig. 53.12 and 53.15, from Gilbreath. J.A.: “Dipmeter Interpretation Rules,” Schlumberger
New
Orleans.
Figs. 53.13 and 53.14, from “Open Hole Log Analysis and Formation Evaluation.” Vizilog Figs. 53.16 through 53.18, from 7k Lox Analyst (March-April 1979) 20. Schlumherger, Houston (1982). Fig. 53.20, from “Well Evaluation Developments” Fig. 53.23 through 53.25, from Dresser Atlas Production Senlices Catalog, Dresser Atlas. Fig. 53.26, from The &IR Analyst (March-April 1984) 25-28. Fig. 53.27 through 53.32, from “Well Evaluation Developments 1982,” Schlumherger. Table 53.1 and Fig. 53.5, from EXLOG Flyer GA 817-A. EXLOG (June 1983). Table 53.3 and Figs. 53.21 and 53.22, from Dia-Log flyer, The Dia-Log Co., Houston.
Inc..
Houston.
Chap. 54 Figs. 54.6 through 54.9, courtesy Tulsa,
Dowell
Schlumherger
Technical
Brochure
TSL-2038,
Dowell Schlumberger 1982). Tulsa. OK.
Technical
Brochure
TSL45
‘‘Acidizing-State-of-the-Art,”
OK (1981).
Chap. 56 Figs. 56.1 through 56.8, courtesy and Equipment
Catalog”
(Sept.
19, “Dowell
Sand Control
Techniques
Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Acknowledgments 1. Mathematical
.. .....
....
. .
. . . . . ..~......................___.____._.
v
Tables and Units and Systems of Weights and Measures
Mathematical Tables Units and Systems of Weights
...............
.. ...
and Measures
...............
1-2 1-68
2. Casing, Tubing, and Line Pipe .............................................................................. Casing.. Tubing ................................................................................ Line Pipe .............................................................................. Equations for Calculating Performance Properties of Casing, API Threading Data .....................................................................
Tubing,
and Line Pipe
...............
2-1 2-38 2-46 2-46 2-64
3. Wellhead Equipment and Flow Control Devices ...............
Introduction . API Flanged or Clamped Wellhead Equipment. Flow Control Devices: Safety Shut-In Systems Other Flow-Control Devices Corrosion Special Application. Independent Screwed Wellhead.
............... ............... ............... ............... ............... ...............
3-l 3-l 3-18 3-34 3-35 3-36 3-39
4. Production Packers ...............
Production Packers Classification and Objectives Tubing-to-Packer Connections. Packer Utilization and Constraints Considerations for Packer Selection Tubing/Packer System Tubing Response Characteristics. Combination Tubing/Packer Systems Tubing/Packer Forces on Intermediate Packers
............... ............... ............... ............... ............... ............... ...............
4-l 4-l 4-l 4-4 4-6 4-8 4-11 4-l I
5. Gas Lift Introduction................................................... Gas Fundamentals as Applied to Gas Lift Gas Lift Valve Mechanics Continuous-Flow Gas Lift Intermittent Gas Lift Unloading Procedures and Proper Adjustment
.
of Injection
. Gas Rate
.
5-l S-3 5-12 5-21 5-38 5-53
6. Hydraulic Pumping Introduction Downhole Pumps Principles of Operation-Reciprocating Jet Pumps Surface Equipment Appendix A-Fluid Properties Appendix B-Friction Relationships
7. Electric Submersible
6-1 6-2 6-8 6-34 6-49 6-66 6-69
Pumps
Pumps 7-l 7-l 7-l 7-3 7-9 7-12 7-14
Introduction
ESP System. Application5 ESP System Components. Selection Data and Methods Handling, Installation. and Operation Troubleshooting
xv
8. Subsurface Sucker-Rod Pumps Introduction ................... Pump Selection ................ Plungers ...................... Slippage Past Plungers. ......... Soft-Packed Plungers ........... Balls and Seats ................ Double Valves ................ Bottom-Discharge Valve ........ Three-Tube Pump. ............. Gas Anchors .................. Special Pumps. ................ Corrosion .................... Effect of Gases and Vapors. ..... Conclusions ...................
.
.
8-l 8-2 8-4 8-5 8-6 8-7 8-7 8-8 8-8 8-9 8-9 8-9 8-10 8-10
9. Sucker Rods Introduction ................... Steel Sucker Rods ............ Fiberglass Sucker Rods .........
9-l 9-l 9-10
..,................,..
10. Pumping Units and Prime Movers for Pumping Units: Part l-Pumping
Units IO-I IO-I IO-4 IO-5 IO-6 IO-7 IO-7 IO-12 IO-13
Introduction ............................................................ Pumping Units ......................................................... Component Parts ....................................................... Pumping Unit Loading ................................................... Counterbalance ......................................................... Sizing ................................................................. Installation ............................................................. Lubrication ............................................................ Changing the Oil .......................................................
Pumping Units and Prime Movers for Pumping Units: Part 2-Prime
Movers for Pumping Units
Introduction ............................................................................ Internal-Combustion Engines .............................................................. Electric Motors for Oilwell Pumping .......................................................
lo-14 IO-14 IO-19
11. Oil Storage Types of Storage Tanks ................................ Tank Corrosion Protection ............................. Appurtenances ........................................ Venting Atmospheric and Low-Pressure Storage Tanks ...... Materials of Construction .............................. Production Equipment ................................. Vapor Losses ........................................ Vapor Control and Gravity Conservation With Storage Tanks Underground Storage ..................................
11-l 1 l-4 11-6 11-6 1 l-9 11-9 11-11 I l-12 11-13
12. Oil and Gas Separators ........................................... Summary.. Introduction ........................................... Primary Functions of Oil and Gas Separators ............... Secondary Functions of Oil and Gas Separators ............. Special Problems in Oil and Gas Separation ................ Methods Used To Remove Oil From Gas in Separators ...... ............ Mist Extractors Used in Oil and Gas Separators ...... Methods Used To Remove Gas From Oil in Separators Estimated Quality of Separated Fluids ..................... Classification of Oil and Gas Separators ................... Centrifugal Oil and Gas Separators and Gas Scrubbers ....... .................... Illustrations of Oil and Gas Separators Comparison of Oil and Gas Separators .................... Estimating the Sizes and Capacities of Oil and Gas Separators. xvi
..
12-l 12-l . 12-3 12-4 12-6 12-8 12-l I 12-13 12-13 12-16 12-20 12-21 12-21 12-21
............................. Computer Sizing of Oil and Gas Separators ........ Capacity Curves for Vertical and Horizontal Oil and Gas Separators ................. Practical Considerations in Sizing Oil and Gas Separators Stage Separation of Oil and Gas. ...................................... Selection and Application of Separators and Scrubbers .................... .......................... Construction Codes for Oil and Gas Separators Controls, Valves, Accessories, and Safety Features for Oil and Gas Separators Operation and Maintenance Considerations for Oil and Gas Separators .......
12-25 12-27 12-32 12-32 12-35 12-38 12-39 12-40
13. Gas Measurement and Regulation 13-l 13-l 13-49
Introduction ............................................ ...................................... Gas Measurement. ........................................... Regulation..
14. Lease-Operated
Hydrocarbon Recovery Systems Introduction............................................... Low-Temperature Separation (LTS) Systems . Gas-Treating Systems for Removal of Water Vapor,
15. Surface Facilities for Waterflooding
.. CO,,
14-l 14-l 14-17
. . .... and H,S
and Saltwater Disposal
Introduction ............................................ Piping System Design ................................... Selecting Pumps and Drivers ............................. Separating Suspended Solids From Heater. .................. Treating Hydrocarbons From Water. ....................... Dissolved Gas Removal .................................. Dissolved Solids Removal ................................ Removing Hydrocarbons From Solids ...................... .................. Process Selection and Project Management Project Control .........................................
5-l 5-l 5-14 5-18 5-2 I 15-28 15-29 1.5-30 15-30 1.5-32
16. Automation of Lease Equipment Introduction ........................................... .................. Automatic Production-Control Equipment Production Safety Controls .............................. ...................... Automatic Quantitative Measurement ...................................... Gas Measurement .............................. Temperature Measurement Automatic Sampler. .................................... BS&W Monitor ....................................... Net-Oil Computer. ..................................... Supervisory Control and Data Acquisition (SCADA) Typical Automatic-Control Installations .................... Automatic Well Testing ................................. LACT ...............................................
Systems
16-1 16-2 16-4 16-5 16-6 16-7 16-7 16-7 16-7 16-8 16-10 16-12 16-12
.
17. Measuring, Sampling, and Testing Crude Oil Introduction ............................................ Procedure for Typical Measuring, Sampling, Abstract of API Manual .................................
17-l 17-l 17-3
and Testing ......
18. Offshore Operations Introduction ............................... Historical Review .......................... Offshore Drilling .......................... Field Operations ........................... ...................... Special Considerations ................................ Structures .............. Offshore Production Operations Arctic .................................... Electrica:, Instrumentation and Control Systems Control of Subsea Production Facilities ........
.
. .. .. .
..
18-I 18-l 18-3 18-17 18-20 18-22 18-27 18-38 18-43 . 18-48
19. Crude Oil Emulsions Introduction............................................. Theories of Emulsions Sampling and Analyzing Crude Oil Emulsions Methods Used in Treating Crude Oil Emulsions, Emulsion-Treating Equipment and Systems . Description of Equipment Used in Treating Crude Oil Emulsions Operational Considerations for Emulsion-Treating Equipment. Economics of Treating Crude Oil Emulsions .
19-I 19-I 19-6 19-6 19-15 19-16 19-28 19-32
. . . .
20. Gas Properties and Correlations Molecular Weight. . ... Ideal Gas . . Critical Temperature and Pressure Specific Gravity (Relative Density) Mole Fraction and Apparent Molecular Specific Gravity of Gas Mixtures Dalton’s Law . Amagat’s Law. Real Gases . . . Principle of Corresponding States. Equations of State . . .. Van der Waals’ Equation. . .. Viscosity . . . .. Viscosity Correlations .. Natural Gasoline Content of Gas . . . Formation Volume Factor . . Coefficient of Isothermal Compressibility Vapor Pressure . . Cox Chart Calingeart and Davis Equation . Lee-Kesler ............................ Example Problems .....................
.
.
.
. . . . of Gas Mixtures . . . . . .. ... ..
Weight
20-I 20-l 20-2 20-4 20-4 20-4 20-4 20-4 20-4 20-4 20-6 20-7 20-9 20-9 20-10 20-I 1 20-11 20-11 20-12 20-13 20-13 20-13
. .. . .. . .. . .. . . .. . ...
.
.
.
.
.
I
...
.
.. .
21. Crude Oil Properties and Condensate Properties and Correlations Introduction .................................................. ............................................ BaseofCrudeOil Physical Properties ............................................ True-Boiling-Point Crude-Oil Analyses ........................... ............................... Bubblepoint-Pressure Correlations ................................. Dewpoint-Pressure Correlations Sage and Olds’ Correlation ..................................... ............................ Total Formation Volume Correlations
21-I 21-l 21-3 21-8 21-9 21-10 2llll 21-15
22. Oil System Correlations Introduction . .. . .. Oil Density Determination. . Bubblepoint-Pressure Correlations Solution GOR for Saturated Oils Oil FVF Correlations .. Total FVF’s Oil Viscosity Correlations . Gas/Oil IFT . . . Glossary . . . .
.... .. .. .... ..
. . . .
. .
. .
.. .
22-l 22-2 22-5 22-9 22-10 22-13 22-13 22-16 22-20
23. Phase Diagrams Introduction . . Single-Component Phase Diagrams Phase Rule .. . . . Types of Diagrams. . . Calculation of Phase Compositions.
.
. .
....
.
. .
.
. . XVIII
23-l 23-l 23-2 23-2 23-10
24. Properties of Produced Waters Introduction and History Sampling ... ... . Analysis Methods for Oilfield Waters Chemical Properties of Oilfield Waters . Inorganic Constituents . Physical Properties of Oilfield Waters Interpretation of Chemical Analyses Occurrence, Origin, and Evolution of Oilfield Recovery of Minerals From Brines . . .
25. Phase Behavior of Water/Hydrocarbon
.. . . . .. ..
24-l 24-3 24-5 24-5 24-9 24-12 24-18 24-19 24-20
.. ..
. . Waters . ..
.
.
.
.
Systems 25-l 25-1 25-4 25-10 25-11 25-16 25-16 25-17 25-18 25-19
Introduction ........................................................................... General Hydrocarbon/Water Phase Diagrams and Equilibrium Data Sources ..................... Hydrate Stability Conditions ............................................................. Determining the Water Content of Gas (or Hydrocarbon-Rich Liquid) in Equilibrium With Hydrates Definition of the Saturated Water Content of Natural Gases in Equilibrium With Aqueous Phases ... Quantitative Prediction of Water Content in Light Hydrocarbon Systems ........................ Quantitative Predictions of Solute Concentrations in the Aqueous Phase ......................... ......................................................... Sour Water Stripper Correlations Oil and Gas Reservoirs That Exist in the Gas Hydrate Region ................................. ..................................................................... Hydrate Inhibition
26. Properties of Reservoir Rocks Introduction . . Porosity . . .... .. .... .... .... . Permeability .. Fluid Saturations. . Electrical Conductivity of Fluid-Saturated Rocks Empirical Correlation of Electrical Properties.
.
26-l 26-l 26-10 26-20 26-27 26-29
.
.
27. Typical Core Analysis of Different Formations Introduction ............................... Porosity .................................. .............................. Permeability ......................... Liquid Saturations Percussion Sidewall Core Data ............... Data From U.S. Areas ..................... Data From Non-U.S. Areas .................
..
.
.
..
.
27-l 27-1 27-l 27-8 27-9 27-9 27-9
28. Relative Permeability Introduction . .. Historical Background Framework Ideas . Measurement Methodologies Recent Literature Critique of Recent Work . . . . . Ramifications Needing Attention. Conclusions . .
. . . .
28-l 28-2 28-2 28-3 28-9 28-10 28-12 28-13
29. Petroleum Reservoir Traps .......... Introduction .............. ................... Trap Classification Characteristics of Reservoir Rocks. ...... ................ .......... Glossary
. .
29-l 29- 1 29-6 29-8
30. Bottomhole Pressures Introduction BHP Instruments . . Pressure Transducer Technology Calculated BHP . Application of BHP .
. ......... ,.,,.,....., xix
30-l 30-l . 30-6 30-7 30-8
31. Temperature in Wells .......
Introduction ........... ......... Thermometers ......... Thcrmometry Summary .............
....... ....... .......
31-l 31-I 31-2 31-7
32. Potential Tests of Oil Wells .......
Texas Allowable Rule .................... Productivity Index (PI) ................... Specific PI. ............................. Theoretical PI ........................... Pseudosteady-State Flow .................. ................. Stock-Tank Measurement. Portable Well Testers, .................... GOR .................................. GOR as a Criterion of Reservoir Performance
.
..
33. Open Flow of Gas Wells Introduction .. ........................ Pitot-Tube Gauging of Low-Pressure Wells ........................ Backpressure Testing ..... Gas Well Inflow Equation. Pseudosteady State ......... Multipoint Test and Example ....................... Isochronal Test and Example ....................... Comparison of Multipoint With Isochronal Test ........ ............... ............. Gas Measurement ... Calculation of Subsurface Pressures .................. Application of Backpressure Tests to Producing Problems ............. Production Rate .................... ............. Causes of Deterioration in Performance ..... ............. Examples of Remedial Operations
....... ....... ....... ....... ....... ....... ....... .......
....... ...
.
.
.
....... ....... ....... ....... ....... ........ ....... ....... ....... ....... ....... .......
32-1 32-2 32-4 32-4 32-5 32-6 32-7 32-14 32-15
33-l 33-1 33-3 33-5 33-7 33-10 33-l 1 33-13 33-13 33-20 _13-20 33-20 33-22
34. Wellbore Hydraulics .......
Introduction Theoretical Basis Producing Wells . Injection Wells Oil Wells Multiphase Flow. Flow Through Chokes Liquid Loading in Wells
. . .. . .. ..
....... ....... ....... ....... ....... ....... .......
34- 1 34- 1 34-3 34-28 34-30 34-35 34-45 34-46
35. Well Performance Equations .......
............... Introduction. Diffusivity Equation ......... Multiphase Flow. ........... ....... Oil Well Performance ...... Gas Well Performance. Transient Well Test Analysis
36. Development
.
.. . . . ..
....... ....... ....... ....... .......
35-1 35-l 35-2 35-2 35-10 35-14
Plan for Oil and Gas Reservoirs
Introduction. Oil and Gas Differences Characterization of the Reservoir Prediction of Reservoir Performance
37. Solution-Gas-Drive
. ..
36-l 36-2 36-3 36-9
Reservoirs
Introduction .................................. .................................. Definitions. .......................... Typical Performance Types of Models Used. ........................ Basic Assumptions of Tank-Type Material Basic Data Required. .......................... Material-Balance Equation ......................
37-1 37-l 37-1 .37-2 _17-2 .37-3 _17-5
Balance
XX
Material Balance as Equation of Straight Line for Determination of OIP and of Gas-Cap Material-Balance Calculations Using Tracy’s Method .................................. Comparison of Tarner’s and Tracy’s Methods ........................................ Material-Balance Calculations Using Muskat and Taylor’s Method ....................... Sensitivity of Material-Balance Results .............................................. Production Rate and Time Calculations .............................................. Insights From Simulator Studies .................................................... ....................................... Volatile Oil Reservoir Performance Predictions
Size
37-6 37-7 37-10 37-10 . 37-13 37-17 37-21 37-22
38. Water Drive Oil Reservoirs . .
Introduction ........................... ........................... Definitions. Mathematical Analysis ..................
34. Gas-Condensate
. 38-1 . 38-l 38-l
.
Reservoirs
Introduction ................................................ Properties and Behavior of Gas-Condensate Fluids. ............... Gas-Condensate Well Tests and Sampling ....................... Sample Collection and Evaluation ............................. Operation by Pressure Depletion .............................. Operation by Pressure Maintenance or Cycling .................. General Operating Problems: Well Characteristics and Requirements Economics of Gas-Condensate Reservoir Operation ...............
. 39-1 39-1 39-4 . 39-6 39-10 39-15 39-24 . 39-26
40. Estimation of Oil and Gas Reserves Estimating Reserves ........................... Petroleum Reserves-Definitions and Nomenclature. Glossary of Terms ..................................................................... Computation of Reservoir Volume ........................................................ Computation of Oil or Gas in Place. ...................................................... Saturated Depletion-Type Oil Reservoirs-Volumetric Methods ................................ API Estimation of Oil and Gas Reserves. .................................................. Undersaturated Oil Reservoirs Without Water Drive Above the Bubblepoint-Volumetric Method ... Volatile Oil Reservoirs-Volumetric Methods ............................................... Oil Reservoirs With Gas-Cap Drive-Volumetric Unit Recovery Computed by Frontal-Drive Method Oil Reservoirs Under Gravity Drainage. ................................................... Oil Reservoirs With Water Drive-Volumetric Methods ...................................... Volumetric Recovery Estimates for Nonassociated Gas Reservoirs ............................. Production-Decline Curves ................ Other Performance Curves ................
40- 1 40-2 40-3 40-4 40-5 40-8 40-12 40-12 40-13 40-13 40-14 40-15 40-2 1 40-26 40-32
41. Valuation of Oil and Gas Reserves Types of Oil and Gas Property Ownership Valuation . . . Forecast of Future Rate of Production Development and Operating Costs . . Federal Taxes . .. ... . . Different Concepts of Valuation Interest Tables and Deferment Factors.
41-l 41-2 41-9 41-l 1 41-12 41-16 41-25
42. Injection Operations 42-l 42-2 42-3
Introduction . . . . . . Important Factors in the Design of Injection Operations Analysis of a Reservoir for Injection Operations
43. Gas-Injection Pressure Maintenance in Oil Reservoirs Introduction. . . . ... Types of Gas-In.jection Operations . Optimal Time To Initiate Gas Pressure-Maintenance Operations Efficiencies of Oil Recovery by Gas Displacement . Methods of Evaluating Unit-Displacement Efficiency. Methods of Evaluating Conformance Efficiency . . Methods of Evaluating Areal Sweep Efficiency . Calculation of Gas Pressure-Maintenance Performance xxi
.
43-1 43-2 43-3 43-3 43-3 43-6 43-7 43-8
Appendix A-Example Calculations of Future Performance . Appendix B-Selected References Containing Equations, Calculation Procedures, and Example Calculations Related to Gas-Injection Performance Predictions . .. . . . Appendix C-Data Requirements for Engineering Analysis of Gas-Injection Operations
44. Water-Injection
43-10
. . . 43-16 43-17
Pressure Maintenance and Waterflood Processes
Introduction ....................................................... Important Factors in Waterflooding or Water-Injection Pressure Maintenance Determination of Residual Oil After Waterflooding ...................... Predicting Water Injection Oil Recovery and Performance Water-Injection Well Behavior ....................................... Water-Injection Case Histories ....................................... Pilot Floods ....................................................... Surface-Active Agents in Waterflooding ............................... Water Source and Requirements ...................................... Water Treating .................................................... Selection and Sizing of Waterflood Plants. .............................
. .
.. . . . . .
.
44-l 44-2 44-5 44-7 44-32 44-36 44-37 44-39 44-41 44-43 44-45
45. Miscible Displacement .
Introduction . . . Theoretical Aspects of Miscible-Phase Displacement Factors Affecting Displacement Efficiency Engineering Study . . . . Appendix-Engineering Examples
. 45-l .
.
. .
.
45-l 45-6 45-8 . 45-10
46. Thermal Recovery .
Introduction. ........................ Two Forms of Steam Injection Processes Three Forms of In-Situ Combustion. .... Historical Development ............... Current Status. ...................... Theoretical Considerations. Analytical Models for Steam Injection ... Numerical Simulation. ................ Laboratory Experimentation ........... Field Projects ....................... Project Design ...................... Well Completion. .................... Field Facilities ...................... Monitoring and Coring Programs ....... Operational Problems and Remedies .... Case Histories ....................... Thermal Properties ...................
.
.. .
.. .
.
. .
.
.. .
46-l 46-l 46-l 46-3 46-3 46-4 46-7 46-l 1 46-12 46-13 46-17 46-19 46-19 46-20 46-2 1 46-22 46-3 I
47. Chemical Flooding Introduction ......................... Mobility Control Processes ............ Low-IFT Processes. .................. High-pH Processes ................... Summary ...........................
47-l . 47- 1 . 41-9 47-18 47-22
.
48. Reservoir Simulation Introduction ........................................... A Brief History ....................................... General Description of Simulation Models ................. Purpose of Reservoir Simulation. ......................... Considerations in Practical Application of Simulation Validity of Simulation Results. ........................... Simulation Technology .................................. 49. Electrical Logging ....................... Fundamentals Spontaneous Potential (SP) Log ........ Resistivity Logging Devices ...........
Models.
.
48-l 48-l . 48-2 . . 48-6 . 48-7 . 48-9 . 48-13
. . . xxii
49-l 49-7 49-l I
49-14 49-1x 49-22 49-25 49-36
Induction Logging ................................ Focused-Electrode Logs. ........................... Microresistivity Devices ........................... Uses and Interpretation of Well Logs ................ The Digital Age ..................................
50. Nuclear Logging Techniques Introduction ...................................... ............ Nuclear Physics for Logging Applications. Nuclear Radiation Logging Devices .................. Interpretation of Nuclear Logs ......................
50-l 50-3 50-15 50-23
.
51. Acoustic Logging Introduction ...................................... Elasticity ........................................ Acoustic Wave Propagation in Rocks. ................ Acoustic Wave Propagation Methods ................. Methods of Recording Acoustic Data. ................ ..................................... Applications Conclusions ...................................... Appendix-Theory of Elastic Wave Propagation
.. ..
51-l 51-l 51-4 51-l I 51-14 51-28 51-47 51-49
. .
in Rocks
52. Mud Logging .
Introduction . . .. Service Types . . . Formation Evaluation Services . . The Modern Mud Logging Unit The Mud Log ... .... Petroleum Engineering Services . Drilling Engineering Services .. Selecting a Mud Logging Service. Standards for and Status of Services
.
. .
.
.
. .
52-l . 52-l 52-2 52-11 52-11 52-16 52-27 52-28 52-30
53. Other Well Logs .
Introduction ...................................... MWD .......................................... Directional Surveys ............................... Dipmeter Logging ................................ Caliper Logs ..................................... Casing Inspection Logs ............................
..
.
.
.
53-l 53-l 53-3 53-7 53-16 53-17
54. Acidizing Introduction . General Principles . Acid Reaction Rates Acid Additives Acidizing Techniques Laboratory Testing Acid Treatment Design Critical Wells Summary .
.
. . . . .
.
.
.
. .
. . .
...
54-l 54-l 54-4 54-6 54-8 54-9 54-10 . 54-11 54-12
55. Formation Fracturing Introduction . Hydraulic Fracturing Theory Formations Fractured . . Fracture Planes. . Fracture Area ... . Reservoir-Controlled Fluids. Viscosity-Controlled Fluids Fluid-Loss-Controlled Fluids
Stimulation Results. Fracturing Fracturing
Materials . Techniques
.
..
.. . .
.. . . ... . . . . . .. .
.
.
55-l 55-l 55-2 55-2 55-2 55-2 55-4 55-4 55-4 55-5 55-8
55-9 55-9 55-9
Multiple-Zone Fracturing. Fracturing Equipment. Treatment Planning and Design
56. Remedial Cleanup, Sand Control, and Other Stimulation Treatments Introduction................................................... Reperforation ___.,..,,,..._..___.,,.,..,,,._.._..,._____._.._. Abrasive Jet Cleaning . Mud Removal................................................. Water Blocks and Emulsions Scale Deposits................................................. Paraffin Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Large-Volume Injection Treatments Steam Injection General Comments . Sand Control ~~~~.~..~.~.~~~..~..~~~.~.~~~~....~~~..~~~...~~.~~
56-l 56- 1 56-l 56-l 56-2 56-2 56-2 56-2 56-2 56-2 56-2
57. Oil and Gas Leases 57-l 57-3 57-6 57-7 57-7 57-8 57-10 57-l I 57-l I
The Landowner’s Interest ......... The Oil and Gas Lease ........... Assignments by the Landowner .... Assignments by the Lessee ........ Unit Operations ................. Getting the Well Drilled .......... Lease Problems During Development Taxation ....................... Offshore Leasing ................
58. The SI Metric System of Units and SPE Metric Standard Preface .................................. Part 1: SI-The International System of Units Introduction ................................................... SI Units and Unit Symbols ....................................... Application of the Metric System ................................. Rules for Conversion and Rounding. .............................. Special Terms and Quantities Involving Mass and Amount of Substance Mental Guides for Using Metric Units ............................. Appendix A-Terminology .............. Appendix B-S1 Units ................... . Appendix C-Style Guide for Metric Usage Appendix D-General Conversion Factors. .. Appendix E-Conversion Factors for the Vara ...................... Part 2: Discussion of Metric Unit Standards .......................... Introduction ................... Review of Selected Units ........ Unit Standards Under Discussion Notes for Table 2.2 ............ . Notes for Table 2.3 ............
58-2 58-2 58-2 58-2 58-3 58-5 58-7 58-8 58-8 58-9 58-l I 58-14 58-20 58-2 I 58-2 I 58-22 58-24 58-25 5x-25
59. SPE Letter and Computer Symbols Standard Symbols in Alphabetical Order.. Quantities in Alphabetical Order. Subscript Definitions in Alphabetical Order Subscript Symbols in Alphabetical Order
Index Author Subject
.
..
. .....
..
. .... .... .
.... .... .
59-2 59-18 59-52 59-63
I .
. .
xxiv
.. ....
...
1 15
Chapter 1
Mathematical Tables and Units and Systems of Weights and Measures Philip
Franklin,
L.E. Barbrow.
Massachusetts Inst.of Technology* U.S. Nat].Bureau of Standards
Contents
Compound
Mathematical Tables By PhilipFranklin Numbers Table Table Table Table Table Table Circles
1 .l-Squares I.2-Gibes 1.3-Square Roots 1.4-Cube Roots 1.5-Three-Halves Pow& 1.6--Reciprocals
Table Table Table Table Table Table Spheres
1.7-Circumferences by Hundredths 1.8-Areas by Hundredths 1.9-Circumferences and Areas by Eighths 1 .lO-Areas in Square Feet 1 .ll-Segments, ‘Given h/c ............... 1.12-Segments. Given h/D ................
Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table
: :: :: ::: :: : ::::
I-2 I-7 .i-ii l-14 :l-19 1-21 l-24 .I-26 l-28 I-30 l-31 1-32
1.13-Segments 1-33 ......................... 1,14-Volumes by Hundredths .............. 1-34 1 .I5-Regular Polygons .................. l-36 1.16--Binomial Coefficients............... 1-37 1,17-Common Logarithms (1.OO to 2.00) 1-38 I .18-Common Loqarithms I-40 1.19-Degrees and-Minutes in Radians ....... l-42 1.20--Radians in Degrees ...... ......... 1-43 1.21-Natural Sines and Cosines l-44 1.22-Natural Tangents and Cotangents l-46 1.23-Natural Secants and Cosecants l-48 1.24-Trigonometric Functions ........... I-50 1.25-Exponentials ........... ........... 1-55 1.26-Natural Logarithms I-56 1.27-Hyperbolic Sines 1-58 1.28-Hyperbolic Cosines : : : : : : : : : : : : : 1-59 1.29-Hyperbolic Tangents I-60 1.30-Multiples of 0.4343 l-60 1.31-Multiples of 2.3026 I-60 1.32-Standard Distribution of Residuals : I-61 1.33-Factors for Computing Probable Error 1-61
‘This chapter I” the 1962 edMn Judson (both deceased)
was written by Ph,l,p Franklm
and Laws ”
Interest
Table 1.34-Amount of a Given Principal Table 1.35-Amount of an Annuity Table 1.36-Principal Amounting to a Given Sum Annuities Table 1.37-Amountino to a Given Sum (Sinking Fund) y., Table 1.38-Present Worth Table 1.39-Provided for by a Given Capital Table 1.40-Decimal Equivalents
I-62 l-63 l-64
l-65 l-66 1-66 l-67
Units and Systems of Weights and Measures by L.E. Barbrow Conversion Tables Table 1.41-Length Equivalents Table 1.42-Conversion of Lengths :: : ::: Table 1.43-Common Fractionsof an Inch to Millimeters Table 1.44-Decimals of an Inch to Millimeters Table 1.4%Millimeters to Decimals of an Inch Table 1.46-Area Equivalents Table 1.47-Volume and Capacity Equivalents Table1.48-Areas Table 1.49-Volumes or Cubic Meters Table 1.50-Volumes or Capacities ::: Table 1.51-Mass Equivalents Table 1.52-Masses .‘,‘,’‘.’‘.’ Table 1.53-Velocity Equivalents Table 1.54-Linear and Angular Velocities : : : Table 1.55--Pressures Table 1.56-Pressure Eauivalents ‘.‘. Table 1.57-Energy or Work Equivalents Table 1.58-Energy, Work, Heat Table 1.59-Pow& Equivalents Table 1.60-Power .. ‘, Table 1.61--Density Equivalents Table 1.62-Thermal Conductivity Table 1.63-Thermal Conductance :: Table 1.64-Heat Flow Table 1.65-Relative DensitiesCorrespondtng to OAPI and Weights per U.S. Gallon
1-71 I-71 I-72 l-72 I-72 l-73 I-73 I-74 l-74 I-74 l-75 I-75 l-76 I-76 l-76 l-77 l-77 I-78 I-78 l-78 l-79 l-79 I-79 I-79 l-80
PETROLEUM
l-2
TABLE 1 .I -SQUARES
1
2
3
4
ENGINEERING
OF NUMBERS
5
6
7
8
9
1.000 1.020 1.040 1.081 1.082
1.002 1.022 1.042 1.083 1.084
1.004 1.024 1.044 1.065 1.086
1.006 1.026 I.047 1.087 1.088
1.008 1.028 1.049 1.089 1.090
1.010 1.030 1.051 1.071 1.092
1.012 1.032 1.053 1.073 1.094
1.014 1.034 1.055 1.075 1.096
1.018 1.036 1.057 1.077 1.098
1.018 1.038 1.059 1.080 1.100
1.102 1.124 1.145 1.188
1.105 1.128 1.147 1.189 1.190
1.107 1.128 1.149 1.171 1.192
1.109 1.130 1.151 1.173 1.195
1.111 1.132 1.153 1.175 1.197
1.113 1.134 1.156 1.177 1.199
1.115 1.138 1.158 1.179 1.201
1.117 1.138 1.160 1.182 1.203
1.119 1.141 1.162 1.184 1.206
1.121 1.143 1.184 1.186 1.208
1.210 1.232 1.254 1.277 1.300
1.212 1.234 1.257 1.279 1.302
1.214 1.237 1.259 1.281 1.304
1.217 1.239 1.281 1.284 1.306
1.219 1.241 1.263 1.286 1.309
1.221 1.243 1.266 1.288 1.311
1.223 1.245 1.268 1.290 1.313
1.225 1.248 1.270 1.293 1.316
1.228 1.250 1.272 1.295 1.318
1.230 1.252 1.275 1.297 1.320
1.322 1.346 1.369 1.392 1.416
1.325 1.348 1.371 1.395 1.418
1.327 1.350 1.374 1.397 1.421
1.329 1.353 1.376 1.399 1.423
1.332 1.355 1.378 1.402 1.426
1.334 1.357 1.381 1.404 1.428
1.336 1.360 1.383 1.407 1.430
1.339 1.362 1.385 1.409 1.433
1.341 1.364 1.388 1.411 1.435
1.343 1.387 1.390 1.414 1.438
1.21 1.22 1.23 1.24
1.440 1.484 1.488 1.513 1.538
1.442 1.467 1.491 1.515 1.540
1.445 1.469 1.493 1.518 1.543
1.447 1.471 1.496 1.520 1.545
1.450 1.474 1.498 1.523 1.548
1.452 1.476 1.501 1.525 1.550
1.454 1.479 1.503 1.528 1.553
1.457 1.481 1.506 1.530 1.555
1.459 1.484 1.508 1.533 1.558
1.462 1.486 1.510 1.535 1.560
1.25 1.26 1.27 1.28 1.29
1.582 1.588 1.813 1.638 1.684
1.585 1.590 1.815 1.641 1.667
1.568 1.593 1.618 1.644 1.669
1.570 1.595 1.821 1.648 1.672
1.573 1.596 1.823 1.849 1.874
1.575 1.6OC 1.626 1.651 1.677
1.578 1.803 1.628 1.654 1.680
1.580 1.805 1.831 1.658 1.682
1.583 1.606 1.833 1.659 1.685
1.585 1.610 1.838 1.862 1.887
1.30
1.690 1.716 1.742 1.769 1.796
1.893 1.719 1.745 1.772 1.798
1.695 1.721 1.748 1.774 1.801
1.898 1.724 1.750 1.777 1.804
1.700 1.727 1.753 1.780 1.806
1.703 1.729 1.756 1.782 1.809
1.708 1.732 1.758 1.785 1.812
1.708 1.734 1.761 1.788 1.814
1.711 1.737 1.764 1.790 1.617
1.713 1.74c 1.766 1.793 1.820
1.822 1.850 1.877 1.904 1.932
1.825 1.852 1.880 1.907 1.935
1.828 1.855 1.882 1.910 1.938
1.831 1.858 1.885 1.913 1.940
1.833 1.880 1.888 1.915 1.943
1.836 1.863 1.891 1.918 1.946
1.839 1.886 1.893 1.921 1.949
1.841 1.889 1.896 1.924 1.952
1.844 1.871 1.899 1.927 1.954
1.847 1.874 1.902 1.929 1.957
1.960 1.988 2.016 2.045 2.074
1.963 1.991 2.019 2.048 2.076
1.966 1.994 2.022 2.051 2.079
1.968 1.997 2.025 2.053 2.082
1.971 1.999 2.028 2.056 2.085
1.974 2.002 2.031 2.059 2.088
1.977 2.005 2.033 2.062 2.091
1.980 2.008 2.036 2.065 2.094
1.982 2.011 2.039 2.068 2.097
1.985 2.014 2.042 2.071 2.100
2.102 2.132 2.181 2.190 2.220
2.105 2.135 2.164 2.193 2.223
2.108 2.137 2.187 2.198 2.226
2.111 2.140 2.170 2.199 2.229
2.114 2.143 2.173 2.202 2.232
2.117 2.146 2.176 2.205 2.235
2.120 2.149 2.179 2.208 2.238
2.123 2.152 2.182 2.211 2.241
2.126 2.15" 2.184 2.214 2.244
2.129 2.158 2.187 2.217 2.247
2.250 2.280 2.310 2.341 2.372
2.253 2.283 2.313 2.344 2.375
2.258 2.286 2.316 2.347 2.378
2.259 2.289 2.320 2.350 2.381
2.282 2.292 2.323 2.353 2.384
2.285 2.295 2.326 2.356 2.387
2.268 2.298 2.329 2.359 2.390
2.271 2.301 2.332 2.362 2.393
2.274 2.304 2.335 2.385 2.396
2.277 2.307 2.338 2.389 2.399
2.402 2.434 2.465 2.496 2.528
2.406 2.437 2.488 2.500 2.531
2.409 2.440 2.471 2.503 2.534
2.412 2.443 2.474 2.506 2.538
2.415 2.448 2.477 2.509 2.541
2.418 2.449 2.481 2.512 2.544
2.421 2.452 2.484 2.515 2.547
2.424 2.455 2.487 2.519 2.550
2.427 2.459 2.490 2.522 2.554
2.430 2.462 2.493 2.525 2.557
1.05 1.08 1.07 1.08 1.09
1.10 1.11 1.12 1.13 1.14
1.15 1.16 1.17 1.18 1.19
1.20
1.31 1.32 1.33 1.34
1.35 1.38 1.37 1.38
1.39 1.40 1.41 1.42 1.43 1.44
1.45 1.48 1.47 1.48 1.49
1.50 1.51 1.52 1.53 1.54
1.55 1.56 1.57 1.58 1.59
1.166
HANDBOOK
Average Difference 2
3
Exolanation of Table of Souares This tablegivesthe value of N2 forvalues of N from 1 to 10, correctto fourfigures.(Interpolated values may be in error by 1 in the fourthfigure.) To findthe square of a number N outside the range from 1 to 10, note that moving the decimal point one place in Column N is equivalent to moving it two places in the body of the table. For example, (3.217)'=10.35, (0.03217)'=0.001035, and (3,217)'=10,035,000. This table also can be used inverselyto give square roots.
MATHEMATICAL
TABLES
& UNITS & SYSTEMS
TABLE
OF WEIGHTS
l.l-SQUARES
& MEASURES
1-3
OF NUMBERS(continued)
N
0
1
2
3
4
5
6
7
8
9
1.60 1.61 1.62 1.83 1.84
2.560 2.592 2.824 2.657 2.690
2.583 2.595 2.828 2.680 2.693
2.566 2.599 2.631 2.683 2.696
2.570 2.602 2.634 2.667 2.899
2.573 2.805 2.637 2.670 2.703
2.576 2.608 2.641 2.673 2.706
2.579 2.811 2.644 2.676 2.709
2.582 2.815 2.647 2.680 2.713
2.586 2.818 2.650 2.883 2.716
2.589 2.621 2.654 2.688 2.719
1.65 1.88 1.87 1.88 1.89
2.722 2.758 2.789 2.822 2.856
2.726 2.759 2.792 2.828 2.859
2.729 2.762 2.796 2.829 2.863
2.732 2.768 2.799 2.832 2.866
2.738 2.789 2.802 2.836 2.870
2.739 2.772 2.806 2.839 2.873
2.742 2.776 2.809 2.843 2.876
2.748 2.779 2.812 2.848 2.880
2.749 2.782 2.816 2.849 2.883
2.752 2.788 2.819 2.853 2.887
1.70 1.71 1.72 1.73 1.74
2.890 2.924 2.958 2.993 3.028
2.893 2.928 2.962 2.996 3.031
2.897 2.931 2.965 3.000 3.035
2.900 2.934 2.989 3.003 3.038
2.904 2.938 2.972 3.007 3.042
2.907 2.941 2.978 3.010 3.045
2.910 2.945 2.979 3.014 3.049
2.914 2.948 2.983 3.017 3.052
2.917 2.952 2.986 3.021 3.058
2.921 2.955 2.989 3.024 3.059
1.75 1.78 1.77 1.78 1.79
3.082 3.098 3.133 3.188 3.204
3.066 3.101 3.138 3.172 3.208
3.070 3.105 3.140 3.176 3.211
3.073 3.108 3.144 3.179 3.215
3.077 3.112 3.147 3.183 3.218
3.080 3.115 3.151 3.186 3.222
3.084 3.119 3.154 3.190 3.226
3.087 3.122 3.158 3.193 3.229
3.091 3.126 3.161 3.197 3.233
3.094 3.129 3.165 3.201 3.236
1.80 1.81 1.82 1.83 1.84
3.240 3.276 3.312 3.349 3.386
3.244 3.280 3.316 3.353 3.389
3.247 3.283 3.320 3.356 3.393
3.251 3.287 3.323 3.360 3.397
3.254 3.291 3.327 3.364 3.400
3.258 3.294 3.331 3.367 3.404
3.262 3.298 3.334 3.371 3.408
3.285 3.301 3.338 3.375 3.411
3.289 3.305 3.342 3.378 3.415
3.272 3.309 3.345 3.382 3.419
1.85 1.88 1.87 1.88 1.89
3.422 3.480 3.497 3.534 3.572
3.426 3.463 3.501 3.538 3.578
3.430 3.467 3.504 3.542 3.580
3.434 3.471 3.508 3.546 3.583
3.437 3.474 3.512 3.549 3.587
3.441 3.478 3.516 3.553 3.591
3.445 3.482 3.519 3.557 3.595
3.448 3.486 3.523 3.561 3.599
3.452 3.489 3.527 3.565 3.602
3.458 3.493 3.531 3.566 3.606
1.90 1.91 1.92 1.93 1.94
3.610 3.648 3.888 3.725 3.784
3.614 3.652 3.890 3.729 3.787
3.618 3.656 3.694 3.733 3.771
3.821 3.680 3.698 3.738 3.775
3.825 3.663 3.702 3.740 3.779
3.829 3.667 3.706 3.744 3.783
3.833 3.671 3.709 3.748 3.787
3.837 3.675 3.713 3.752 3.791
3.640 3.679 3.717 3.758 3.795
3.844 3.683 3.721 3.760 3.799
1.95 1.98 1.97 1.98 1.99
3.802 3.842 3.881 3.920 3.960
3.806 3.846 3.885 3.924 3.964
3.810 3.849 3.889 3.928 3.968
3.814 3.853 3.893 3.932 3.972
3.818 3.857 3.897 3.936 3.976
3.822 3.861 3.901 3.940 3.960
3.826 3.865 3.905 3.944 3.984
3.830 3.869 3.909 3.948 3.988
3.834 3.873 3.912 3.952 3.992
3.838 3.877 3.916 3.956 3.996
2.00 2.01 2.02 2.03 2.04
4.000 4.040 4.080 4.121 4.162
4.004 4.044 4.084 4.125 4.186
4.008 4.048 4.088 4.129 4.170
4.012 4.052 4.093 4.133 4.174
4.016 4.056 4.097 4.137 4.178
4.020 4.060 4.101 4.141 4.182
4.024 4.064 4.105 4.145 4.188
4.028 4.068 4.109 4.149 4.190
4.032 4.072 4.113 4.153 4.194
4.036 4.076 4.117 4.158 4.198
2.05 2.08 2.07 2.08 2.09
4.202 4.244 4.285 4.328 4.388
4.207 4.248 4.289 4.331 4.372
4.211 4.252 4.293 4.335 4.378
4.215 4.258 4.297 4.339 4.381
4.219 4.280 4.301 4.343 4.385
4.223 4.284 4.306 4.347 4.389
4.227 4.268 4.310 4.351 4.393
4.231 4.272 4.314 4.358 4.397
4.235 4.277 4.318 4.360 4.402
4.239 4.281 4.322 4.364 4.406
2.10 2.11 2.12 2.13 2.14
4.410 4.452 4.494 4.537 4.580
4.414 4.458 4.499 4.541 4.584
4.418 4.461 4.503 4.545 4.588
4.423 4.465 4.507 4.550 4.592
4.427 4.469 4.511 4.554 4.597
4.431 4.473 4.516 4.558 4.801
4.435 4.477 4.520 4.562 4.605
4.439 4.482 4.524 4.587 4.610
4.444 4.486 4.528 4.571 4.814
4.448 4.490 4.533 4.575 4.618
2.15 2.18 2.17 2.18 2.19
4.622 4.886 4.709 4.752 4.796
4.627 4.670 4.713 4.757 4.800
4.831 4.674 4.716 4.761 4.805
4.635 4.679 4.722 4.765 4.809
4.640 4.683 4.728 4.770 4.814
4.844 4.887 4.731 4.774 4.818
4.648 4.692 4.735 4.779 4.822
4.653 4.696 4.739 4.783 4.827
4.857 4.700 4.744 4.787 4.831
4.661 4.705 4.748 4.792 4.836
r
2
=9.66960;
l/r2
=0.101321,
e2 =7.38906.
x2 =9.669w;
(T/z)*
=2.46740;
l/n2
Average Difference 3
4
=0.101321.
(continued
on next page)
I-4
PETROLEUM
TABLEl.l-SQUARES
ENGINEERING
HANDBOOK
OF NUMBERS(continued)
Average Difference
4
5
8
7
8
9
4.853 4.897 4.942 4.986 5.031
4.858 4.902 4.948 4.991 5.036
4.882 4.906 4.951 4.995 5.040
4.888 4.911 4.955 5.000 5.045
4.871 4.915 4.960 5.004 5.049
4.875 4.920 4.964 5.009 5.054
4.880 4.924 4.988 5.013 5.058
4
5.072 5.117 5.162 5.208 5.253
5.076 5.121 5.167 5.212 5.258
5.081 5.128 5.171 5.217 5.262
5.085 5.130 5.176 5.221 5.267
5.090 5.135 5.180 5.226 5.272
5.094 5.139 5.185 5.230 5.276
5.099 5.144 5.189 5.235 5.281
5.103 5.148 5.194 5.240 5.285
5
5.295 5.341 5.387 5.434 5.480
5.299 5.345 5.392 5.438 5.485
5.304 5.350 5.396 5.443 5.490
5.308 5.355 5.401 5.448 5.494
5.313 5.359 5.408 5.452 5.499
5.318 5.364 5.410 5.457 5.504
5.322 5.388 5.415 5.482 5.508
5.327 5.373 5.420 5.488 5.513
5.331 5.378 5.424 5.471 5.518
5.522 5.570 5.871 5.884 5.712
5.527 5.574 5.822 5.889 5.717
5.532 5.579 5.626 5.674 5.722
5.537 5.584 5.631 5.879 5.726
5.541 5.588 5.636 5.883 5.731
5.548 5.593 5.641 5.688 5.738
5.551 5.598 5.645 5.693 5.741
5.555 5.603 5.650 5.698 5.746
5.580 5.807 5.855 5.703 5.750
5.565 5.612 5.660 5.707 5.755
2.40 2.41 2.42 2.43 2.44
5.780 5.808 5.856 5.905 5.954
5.785 5.813 5.861 5.910 5.958
5.770 5.818 5.866 5.915 5.963
5.774 5.823 5.871 5.919 5.988
5.779 5.827 5.876 5.924 5.973
5.784 5.832 5.881 5.929 5.978
5.789 5.837 5.885 5.934 5.983
5.794 5.842 5.890 5.939 5.988
5.798 5.847 5.895 5.944 5.993
5.803 5.852 5.900 5.949 5.998
2.45 2.48 2.47 2.48 2.49
8.002 8.502 8.101 6.150 6.200
6.007 6.057 6.108 6.155 6.205
6.012 6.061 6.111 6.180 6.210
6.017 6.088 6.116 6.185 6.215
6.022 8.071 6.121 8.170 6.220
6.027 6.078 6.126 8.175 6.225
6.032 8.081 6.131 6.180 6.230
6.037 6.086 6.136 6.185 6.235
6.042 6.091 6.140 6.190 6.240
6.047 6.096 6.145 8.195 6.245
2.50 2.51 2.52 2.53 2.54
8.250 8.300 6.350 6.401 6.452
6.255 6.305 6.355 6.406 6.457
6.260 6.310 6.380 6.411 6.462
8.265 8.315 8.366 8.416 8.467
6.270 6.320 8.371 8.421 6.472
6.275 6.325 6.378 6.428 6.477
6.280 6.330 8.381 8.431 8.482
6.285 6.335 6.388 8.438 6.487
6.290 8.340 6.391 6.441 8.492
6.295 6.345 6.396 6.447 6.497
2.55 2.56 2.57 2.58 2.59
8.502 6.554 6.605 6.656 6.708
6.508 8.559 8.810 6.862 8.713
6.513 6.564 6.815 6.667 6.718
8.518 6.569 8.620 8.672 6.724
8.523 8.574 8.625 8.677 8.729
6.528 6.579 6.831 6.882 6.734
8.533 8.584 6.636 6.687 6.739
8.538 6.589 8.641 8.693 8.744
8.543 6.595 8.848 8.698 8.750
6.548 6.600 8.651 8.703 6.755
2.60 2.61 2.62 2.63 2.64
6.780 6.812 6.884 6.917 6.970
8.765 8.817 8.870 6.922 8.975
6.770 6.323 6.375 6.927 f5.980
8.776 8.828 8.880 6.933 8.985
8.781 8.833 8.885 6.938 8.991
6.788 6.838 6.891 6.943 6.996
6.791 6.843 6.896 6.948 7.001
8.798 6.849 6.901 6.954 7.007
8.802 8.854 8.906 6.959 7.012
8.807 8.859 6.912 6.964 7.017
2.65 2.68 2.87 2.68 2.89
7.022 7.076 7.129 7.182 7.238
7.028 7.081 7.134 7.188 7.241
7.033 7.086 i.140 7.193 7.247
7.038 7.092 7.145 7.198 7.252
7.044 7.097 7.150 7.204 7.258
7.049 7.102 7.158 7.209 7.263
7.054 7.108 7.161 7.215 7.288
7.060 7.113 7.166 7.220 7.274
7.085 7.118 7.172 7.225 7.279
7.070 7.124 7.177 7.231 7.285
2.70 2.71 2.72 2.73 2.74
7.290 7.344 7.398 7.453 7.508
7.295 7.350 7.404 7.458 7.513
7.301 7.355 7409 7.484 7.519
7.306 7.360 7.415 7.469 7.524
7.312 7.366 7.420 7.475 7.530
7.317 7.371 7.426 7.480 7.535
7.322 7.377 7.431 7.486 7.541
7.328 7.382 7.437 7.491 7.546
7.333 7.388 7.442 7.497 7.552
7.339 7.393 7.447 7.502 7.557
2.75 2.76 2.77 2.78 2.79
7.562 7.618 7.673 7.728 7.784
7.588 7.623 7.678 7.734 7.790
7.574 7.629 7.884 7.740 7.795
7.579 7.634 7.690 7.745 7.801
7.585 7.840 7.895 7.751 7.806
7.590 7.645 7.701 7.756 7.812
7.596 7.851 7.708 7.782 7.818
7.801 7.656 7.712 7.767 7.823
7.607 7.662 7.717 7.773 7.829
7.812 7.867 7.723 7.779 7.834
N 2.20 2.21 2.22 2.23 2.24
3
1
2
4.840 4.884 4.928 4.973 5.018
4.844 4.889 4.933 4.977 5.022
4.849 4.893 4.937 4.982 5.027
2.25 2.26 2.27 2.28 2.29
5.062 5.108 5.153 5.198 5.244
5.067 5.112 5.157 5.203 5.249
2.30 2.31 2.32 2.33 2.34
5.290 5.338 5.382 5.429 5.478
2.35 2.38 2.37 2.38 2.39
-
0
~
r’=966960.
-In2
=0.101321,
e2 =7389X
r2=9.86960,
(n/2)*
=2.46740.
l/n2
=0 101321
5
8
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
TABLE l.l-SQUARES
N
0
1
2
& MEASURES
l-5
OF NUMBERS (continued)
4
5
6
7
8
9
7.857 7.913 7.969 8.026 8.083
7.862 7.919 7.975 8.032 8.088
7.868 7.924 7.981 8.037 8.094
7.874 7.930 7.986 8.043 8.100
7.879 7.935 7.992 8.049 8.105
7.885 7.941 7.998 8.054 8.111
7.890 7.947 6.003 8.060 8.117
8.140
8.151 8.208 8.266 8.323 8.381
8.157 8.214 8.271 8.329 8.387
6.162 8.220 8.277 8.335 8.393
8.168 8.225 8.283 8.341 8.398
8.174 8.231 8.289 8.346 8.404
3
2.80 2.81 2.82 2.83 2.84
7.840 7.896 7.952 8.009 8.066
7.646 7.902 7.958 8.015 8.071
7.851 7.907 7.964 8.020 8.077
2.85 2.86 2.87 2.88 2.89
8.122 8.180 8.237 8.294 8.352
8.128 8.185 6.243 8.300 8.358
8.134 8.191 8.248 8.306 8.384
8.254 8.312 8.369
8.145 8.202 8.260 8.317 8.375
2.90 2.91 2.92 2.93 2.94
8.410 8.468 8.526 8.585 8.644
8.416 8.474 8.532 8.591 8.649
8.422 8.480 8.538 8.597 8.655
6.427 8.486 8.544 8.602 8.661
8.433 8.491 8.550 8.606 8.667
8.439 8.497 8.556 8.614 8.673
8.445 8.503 8.561 8.820 8.679
8.451 8.509 8.567 8.626 8.885
8.456 8.515 8.573 8.632 8.691
8.462 8.521 8.579 8.638 8.697
2.95 2.96 2.97 2.98 2.99
8.702 8.762 8.821 8.880 8.940
8.708 8.768 8.827 8.886 8.946
8.714 8.773 8.833 8.892 8.952
8.720 8.779 8.839 8.898 8.958
8.726 8.785 8.845 8.904 8.964
8.732 8.791 8.851 8.910 8.970
8.738 8.797 8.857 8.916 8.976
8.744 8.803 8.863 8.922 8.982
8.750 8.809 8.868 8.928 8.988
8.756 8.815 8.874 8.934 8.994
3.00 3.01 3.02 3.03 3.04
9.000 9.060 9.120 9.181 9.242
9.006 9.066 9.126 9.187 9.248
9.012 9.072 9.132 9.193 9.254
9.018 9.078 9.139 9.199 9.260
9.024 9.084 9.145 9.205 9.266
9.030 9.090 9.151 9.211 9.272
9.036 9.096 9.157 9.217 9.278
9.042 9.102 9.163 9.223 9.284
9.048 9.108 9.169 9.229 9.290
9.054 9.114 9.175 9.236 9.296
3.05 3.06 3.07 3.08 3.09
9.302 9.364 9.425 9.486 9.548
9.309 9.370 9.431 9.493 9.554
9.315 9.376 9.437 9.499 9.560
9.321 9.382 9.443 9.505 9.567
9.327 9.388 9.449 9.511 9.573
9.333 9.394 9.456 9.517 9.579
9.339 9.400 9.462 9.523 9.585
9.345 9.406 9.468 9.530 9.591
9.351 9.413 9.474 9.536 9.598
9.357 9.419 9.480 9.542 9.604
3.10 3.11 3.12 3.13 3.14
9.610 9.672 9.734 9.797 9.860
9.616 9.678 9.741 9.803 9.866
9.622 9.685 9.747 9.809 9.872
9.629 9.691 9.753 9.816 9.878
9.635 9.697 9.759 9.822 9.885
9.641 9.703 9.766 9.828 9.891
9.647 9.709 9.772 9.834 9.897
9.653 9.716 9.778 9.841 9.904
9.660 9.722 9.784 9.847 9.910
9.666 9.728 9.791 9.853 9.916
3.15 3.16
9.922 9.986
9.929 9.992
9.935 9.998
9.941 10.005
9.948
9.954
9.960
9.967
9.973
9.979
8.197
3.1 3.2 3.3 3.4
10.24 10.89 11.56
10.30 10.96 11.63
10.37 11.02 11.70
10.43 11.09 11.76
10.50 11.16 11.83
10.56 11.22 11.90
9.99 10.63 11.29 11.97
10.05 10.69 11.36 12.04
10.11 10.76 11.42 12.11
10.18 10.82 11.49 12.18
3.5 3.6 3.7 3.8 3.9
12.25 1296 13.69 1444 15.21
12.32 13.03 13.76 14.52 15.29
12.39 13.10 13.84 14.59 15.37
12.46 13.18 13.91 14.67 15.44
12.53 13.25 13.99 14.75 15.52
12.60 13.32 14.06 14.82 15.60
12.87 13.40 14.14 14.90 15.68
12.74 13.47 14.21 14.98 15.76
12.82 13.54 14.29 15.05 15.84
12.89 13.62 14.36 15.13 15.92
4.0 4.1 4.2 4.3 4.4
16.00 16.81 17.64 18.49 19.36
16.08 16.89 17.72 18.58 19.45
16.16 16.97 17.81 18.66 19.54
16.24 17.06 17.89 18.75 19.62
16.32 17.14 17.98 18.84 19.71
16.40 17.22 18.06 18.92 19.80
16.48 17.31 18.15 19.01 19.89
16.56 17.39 18.23 19.10 19.98
16.65 17.47 18.32 19.18 20.07
16.73 17.56 18.40 19.27 20.16
4.5 4.6 4.7 4.6 4.9
20.25 21.16 22.09 23.04 24.01
20.34 21.25 22.18 23.14 24.11
20.43 21.34 22.28 23.23 24.21
20.52 21.44 22.37 23.33 24.30
20.61 21.53 22.47 23.43 24.40
20.70 21.62 22.56 23.52 24.50
20.79 21.72 22.66 23.62 24.60
20.88 21.81 22.75 23.72 24.70
20.98 21.90 22.85 23.81 24.80
21.07 22.00 22.94 23.91 24.90
5.0 5.1 5.2 5.3 5.4
25.00 26.01 27.04 28.09 29.16
25.10 26.11 27.14 28.20 29.27
25.20 26.21 27.25 28.30 29.38
25.30 26.32 27.35 28.41 29.48
25.40 26.42 27.46 28.52 29.59
25.50 26.52 27.56 28.62 29.70
25.60 26.63 27.67 28.73 29.81
25.70 26.73 27.77 28.84 29.92
2581 26.83 27.88 28.94 30.03
25.91 26.94 27.98 29.05 30.14
r2
=986960.
l/r2
=0101321.e2=736906
r2 =9.66960.
(T/Z)~ =2.46740.
l/n2
Average Difference 6
8
9
10
11
=o 101321
(contmued
on next page)
l-6
PETROLEUM
TABLE l.l-SQUARES
N
0
1
2
3
ENGINEERINGHANDBOOK
OF NUMBERS (continued)
4
5
6
7
8
9
5.5 5.6 5.7 5.8 5.9
30.25 31.36 32.49 33.64 34.81
30.36 31.47 32.60 33.76 34.93
30.47 31.58 32.72 33.87 35.05
30.58 31.70 32.83 33.99 35.16
30.69 31.81 32.95 34.11 35.28
30.80 31.92 33.06 34.22 35.40
30.91 32.04 33.18 34.34 35.52
31.02 32.15 33.29 34.46 35.64
31.14 32.26 33.41 34.57 35.76
31.25 32.38 33.52 34.69 35.88
6.0 6.1 6.2 6.3 6.4
36.00 37.21 38.44 39.69 40.96
36.12 37.33 38.56 41.09
36.24 37.45 38.69 39.94 41.22
36.36 37.58 38.81 40.07 41.34
36.48 37.70 38.94 40.20 41.47
36.60 37.82 39.06 40.32 41.60
36.72 37.95 39.19 40.45 41.73
36.84 38.07 39.31 40.58 41.86
36.97 38.19 39.44 40.70 41.99
37.09 38.32 39.56 40.83 42.12
6.5 6.6 6.7 6.8 6.9
42.25 43.56 44.89 46.24 47.61
42.38 43.69 45.02 46.38 47.75
42.51 43.82 45.16 46.51 47.89
42.64 43.96 45.29 46.65 48.02
42.77 44.09 45.43 46.79 48.16
42.90 44.22 45.56 46.92 48.30
43.03 44.36 45.70 47.06 48.44
43.16 44.49 45.83 47.20 48.58
43.30 44.62 45.97 47.33 48.72
43.43 44.76 46.10 47.47 48.86
7.0 7.1 7.2 7.3 7.4
49.00 50.41 51.84 53.29 54.76
49.14 50.55 51.98 53.44 54.91
49.28 50.69 52.13 53.58 55.06
49.42 50.84 52.27 53.73 55.20
49.56 50.98 52.42 53.88 55.35
49.70 51.12 52.56 54.02 55.50
49.84 51.27 52.71 54.17 55.65
49.98 51.41 52.85 54.32 55.80
50.13 51.55 53.00 54.46 55.95
50.27 51.70 53.14 54.61 56.10
7.5 7.6 7.7 7.8 7.9
56.25 57.76 59.29 60.84 62.41
56.40 57.91 59.44 61.00 6257
56.55 58.06 59.60 61.15 62.73
56.70 58.22 59.75 61.31 62.88
56.85 58.37 59.91 61.47 63.04
57.00 58.52 60.06 61.62 63.20
57.15 58.68 60.22 61.78 63.36
57.30 58.83 60.37 61.94 63.52
57.46 58.98 60.53 82.09 83.68
57.61 59.14 60.68 62.25 63.84
8.0 8.1 8.2 8.3 8.4
64.00 65.61 67.24 68.89 70.56
64.16 65.77 67.40 69.06 70.73
64.32 65.93 67.57 69.22 70.90
64.48 66.10 67.73 69.39 71.06
64.64 66.26 67.90 69.56 71.23
64.80 66.42 68.06 69.72 71.40
64.96 66.59 68.23 69.89 71.57
65.12 66.75 68.39 70.06 71.74
65.29 66.91 68.56 70.22 71.91
65.45 67.08 68.72 70.39 72.08
8.5 8.6 8.7 8.8 8.9
72.25 73.96 75.69 77.44 79.21
72.42 74.13 75.86 77.62 79.39
72.59 74.30 76.04 77.79 79.57
72.76 74.48 76.21 77.97 79.74
72.93 74.65 76.39 78.15 79.92
73.'10 74.82 76.56 78.32 80.10
73.27 75.00 76.74 78.50 80.28
73.44 75.17 76.91 78.68 80.46
73.62 75.34 77.09 78.85 80.64
73.79 75.52 77.26 79.03 80.82
9.0 9.1 9.2 9.3 9.4
81.00 82.81 84.64 86.49 88.36
81.18 82.99 84.82 86.68 88.55
81.36 83.17 85.01 86.86 88.74
81.54 83.36 85.19 87.05 88.92
81.72 83.54 85.38 87.24 89.11
81.90 83.72 85.56 87.42 89.30
82.08 83.91 85.75 87.61 69.49
82.26 84.09 85.93 87.80 89.68
82.45 84.27 86.12 87.98 89.87
82.63 84.46 86.30 88.17 90.06
9.5 9.6 9.7 9.8 9.9
90.25 92.16 94.09 96.04 98.01
so.44 92.35 94.28 96.24 98.21
90.63 92.54 94.48 96.43 98.41
90.82 92.74
91.01 92.93 94.87 96.83 98.80
91.20 93.12 95.06
91.39 93.32
91.58 93.51
91.78 93.70
95.28 97.22 99.20
95.45 97.42 99.40
95.65 97.61 99.60
91.97 93.90 95.84 97.81 99.80
10.0
39.82
94.67 96.63 98.60
97.02 99.00
100.0
r
2
=986960
lh2
=o 101321. e2 =736906
r2=966960.(r12)2=246740.
l/r2
=o 101321
Average Difference 11
12
13
14
15
16
17
18
19
20
MATHEMATICAL
TABLES
& UNITS & SYSTEMS
OF WEIGHTS
& MEASURES
1-7
TABLE1.2-CUBESOFNUMBERS
1
2
N
0
1.00 1.01 1.02 1.03 1.04
1.000 1.030 1.061 1.093 1.125
1.003 1.033 1.064 1.096 1.128
1.006 1.036 1.067 1.099 1.131
1.009 1.040 1.071 1.102 1.135
1.012 1.043 1.074 1.106 1.138
1.015 1.046 1.077 1.109 1.141
1.018 1.049 1.080 1.112 1.144
1.021 1.052 1.083 1.115 1.148
1.024 1.055 1.086 1.118 1.151
1.027 1.058 1.090 1.122 1.154
1.05 1.06 1.07 1.08 1.09
1.158 1.191 1.225 1.260 1.295
1.161 1.194 1.228 1.263 1.299
1.164 1.198 1.232 1.267 1.302
1.168 1.201 1.235 1.270 1.306
1.171 1.205 1.239 1.274 1.309
1.174 1.208 1.242 1.277 1.313
1.178 1.211 1.246 1.281 1.317
1.181 1.215 1.249 1.284 1.320
1.184 1.218 1.253 1.288 1.324
1.188 1.222 1.256 1.2Sl 1.327
1.10 1.11 1.12 1.13 1.14
1.331 1.368 1.405 1.443 1.482
1.335 1.371 1.409 1.447 1.485
1.338 1.375 1.412 1.451 1.489
1.342 1.379 1.416 1.454 1.493
1.346 1.382 1.420 1.458 1.497
1.349 1.386 1.424 1.462 1.501
1.353 1.390 1.428 1.466 1.505
1.357 1.394 1.431 1.470 1.509
1.360 1.397 1.435 1.474 1.513
1.364 1.401 1.439 1.478 1.517
1.15 1.16 1.17 1.18 1.19
1.521 1.561 1.602 1.643 1.685
1.525 1.565 1.606 1.647 1.689
1.529 1.569 1.610 1.651 1.694
1.533 1.573 1.614 1.656 1.698
1.537 1.577 1.618 1.660 1.702
1.541 1.581 1.622 1.664 1.706
1.545 1.585 1.626 1.668 1.711
1.549 1.589 1.631 1.672 1.715
1.553 1.593 1.635 1.677 1.719
1.557 1.598 1.639 1.681 1.724
1.20 1.21 1.22 1.23 1.24
1.728 1.772 1.816 1.861 1.907
1.732 1.776 1.820 1.865 1.911
1.737 1.780 1.825 1.870 1.916
1.741 1.785 1.829 1.075 1.920
1.745 1.789 1.834 1.879 1.925
1.750 1.794 1.838 1.884 1.930
1.754 1.798 1.843 1.888 1.934
1.758 1.802 1.847 1.893 1.939
1.763 1.807 1.852 1.897 1.944
1.767 1.811 1.856 1.902 1.948
1.25 1.26 1.27 1.28 1.29
1.953 2.000 2.048 2.097 2.147
1.958 2.005 2.053 2.102 2.152
1.983 2.010 2.058 2.107 2.157
1.967 2.015 2.063 2.112 2.162
1.972 2.019 2.068 2.117 2.167
1.977 2.024 2.073 2.122 2.172
1.981 2.029 2.078 2.127 2.177
1.986 2.034 2.082 2.132 2.182
1.991 2.039 2.087 2.137 2.187
1.996 2.044 2.092 2.142 2.192
1.30 1.31 1.32 1.33 1.34
2.197 2.248 2.300 2.353 2.406
2.202 2.253 2.305 2.358 2.411
2.207 2.258 2.310 2.363 2.417
2.212 2.264 2.316 2.369 2.422
2.217 2.269 2.321 2.374 2.428
2.222 2.274 2.326 2.379 2.433
2.228 2.279 2.331 2.385 2.439
2.233 2.284 2.337 2.390 2.444
2.238 2.290 2.342 2.395 2.449
2.243 2.295 2.347 2.401 2.455
1.35 1.36 1.37 1.38 1.39
2.460 2.515 2.571 2.628 2.686
2.466 2.521 2.577 2.634 2.691
2.471 2.527 2.583 2.640 2.697
2.477 2.532 2.588 2.645 2.703
2.482 2.538 2.594 2.651 2.709
2.480 2.543 2.600 2.657 2.715
2.493 2.549 2.605 2.663 2.721
2.499 2.554 2.611 2.668 2.726
2.504 2.560 2.617 2.674 2.732
2.510 2.566 2.622 2.680 2.738
1.40 1.41 1.42 1.43 1.44
2.744 2.803 2.863 2.924 2.986
2.750 2.809 2.869 2.930 2.992
2.756 2.815 2.875 2.936 2.998
2.762 2.821 2.881 2.943 3.005
2.768 2.827 2.888 2.949 3.011
2.774 2.833 2.894 2.955 3.017
2.779 2.839 2.900 2.961 3.023
2.785 2.845 2.906 2.967 3.030
2.791 2.851 2.912 2.974 3.036
2.797 2.857 2.918 2.980 3.042
1.45 1.46 1.47 1.48 1.49
3.049 3.112 3.177 3.242 3.308
3.055 3.119 3.183 3.248 3.315
3.081 3.125 3.190 3.255 3.321
3.068 3.131 3.196 3.262 3.328
3.074 3.138 3.203 3.268 3.335
3.080 3.144 3.209 3.275 3.341
3.087 3.151 3.216 3.281 3.348
3.093 3.157 3.222 3.288 3.355
3.099 3.164 3.229 3.295 3.362
3.106 3.170 3.235 3.301 3.368
1.50 1.51 1.52 1.53 1.54
3.375 3.443 3.512 3.582 3.652
3.382 3.450 3.519 3.589 3.659
3.389 3.457 3.528 3.596 3.667
3.395 3.464 3.533 3.603 3.674
3.402 3.470 3.540 3.610 3.681
3.409 3.477 3.547 3.617 3.688
3.416 3.484 3.554 3.624 3.695
3.422 3.491 3.561 3.631 3.702
3.429 3.498 3.568 3.638 3.709
3.438 3.505 3.575 3.645 3.717
1.55 1.56 1.57 1.58 1.59
3.724 3.796 3.870 3.944 4.020
3.731 3.804 3.877 3.952 4.027
3.738 3.811 3.885 3.959 4.035
3.746 3.818 3.892 3.967 4.042
3.753 3.826 3.900 3.974 4.050
3.760 3.833 3.907 3.982 4.058
3.767 3.840 3.914 3.989 4.065
3.775 3.848 3.922 3.997 4.073
3.782 3.855 3.929 4.005 4.081
3.789 3.863 3.937 4.012 4.088
3
4
5
6
7
8
9
Average Difference 3
4
5
6
7
a
Explanationof Table of Cubes This tablegives the value of N3 forvalues of Nfrom 1 to 10, correctto four figures.(Interpolated values may be in error by 1 in the fourthfigure.) To findthe cube of a number Noutsidethe range from 1 to 10, notethatmovingthe decimal pointone place inColumn Nis equivalentto moving itthreeplaces in the body ofthelable. For example,(4.852)3 = 114.2,(0.4852)3=0.1142, and (485.2)3=114,200.000. This table also can be used inverselyto give cube roots. (continued on next page)
PETROLEUM
1-B
TABLE
-
N
-
0
1
2
1.2-CUBES
3
ENGINEERINGHANDBOOK
OF NUMBERS (continued)
4
6
5
7
8
9
4.104 4.181 4.259 4.339 4.419
4.111 4.189 4.267 4.347 4.427
4.119 4.197 4.275 4.355 4.435
4.127 4.204 4.283 4.363 4.443
4.135 4.212 4.291 4.371 4.451
4.142 4.220 4.299 4.379 4.460
4.150 4.228 4.307 4.387 4.468
4.158 4.236 4.315 4.395 4.476
4.166 4.244 4.323 4.403 4.484
4.574 4.657 4.742 4.827
4.500 4.583 4.666 4.750 4.835
4.508 4.591 4.674 4.759 4.844
4.517 4.599 4.683 4.767 4.853
4.525 4.607 4.691 4.776 4.861
4.533 4.616 4.699 4.784 4.870
4.541 4.624 4.708 4.793 4.878
4.550 4.632 4.716 4.801 4.887
4.558 4.641 4.725 4.810 4.896
4.566 4.649 4.733 4.818 4.904
1.70 1.71 1.72 1.73 1.74
4.913 5.000 5.088 5.178 5.268
4.922 5.009 5.097 5.187 5.277
4.930 5.018 5.106 5.196 5.286
4.939 5.027 5.115 5.205 5.295
4.948 5.035 5.124 5.214 5.304
4.956 5.044 5.133 5.223 5.314
4.965 5.053 5.142 5.232 5.323
4.974 5.062 5.151 5.241 5.332
4.983 5.071 5.160 5.250 5.341
4.991 5.080 5.169 5.259 5.350
1.75 1.76 1.77 1.78 1.79
5.359
5.369
5.452 5.545 5.640 5.735
5.461 5.555 5.649 5.745
5.378 5.470 5.564 5.659 5.755
5.387 5.480 5.573 5.668 5.764
5.396 5.489 5.583 5.678 5.774
5.405 5.498
5.415 5.508 5.602 5.697 5.793
5.424 5.517 5.611 5.707 5.803
5.433 5.526 5.621 5.716 5.813
5.442 5.536 5.630 5.726 5.822
1.80 1.81 1.82 1.83 1.84
5.832 5.930 6.029 6.128 6.230
5.842 5.940 6.039 6.139 6.240
5.851 5.949 6.048 6.149 6.250
5.861 5.959 6.058 6.159 6.260
5.871 5.969 6.068 6.169 6.270
5.881
1.85
6.332 6.435 6.539 6.645 6.751
6.342 6.445 6.550 6.655 6.762
6.352 6.456 6.560 6.666 6.773
6.362 6.466 6.571 6.677 6.783
6.373 6.476 6.581 6.687 6.794
6.592
6.859 6.968 7.078 7.189 7.301
6.870 6.979 7.089 7.200 7.313
6.881 6.990 7.100 7.211 7.324
6.892 7.001 7.111 7.223 7.335
6.902 7.012 7.122 7.234 7.347
1.96 1.97 1.98 1.99
7.415 7.530 7.645 7.762 7.881
7.426 7.541 7.657 7.774 7.892
7.438 7.553 7.669 7.786 7.904
7.449 7.564 7.680 7.798 7.916
2.00 2.01 2.02 2.03 2.04
8.000 8.121 8.242 8.365 8.490
8.012 8.133 8.255 8.378 8.502
8.024 8.145 8.267 8.390 8.515
2.05 2.06 2.07 2.08 2.09
8.615 8.742 8.870 8.999 9.129
8.628 8.755 8.883 9.012 9.142
2.10 2.11 2.12 2.13 2.14
9.261
9.274
9.394 9.528
9.664
9.407 9.542 9.677
9.800
2.15
9.938
1.60 1.61 1.62 1.63 1.64
4.173 4.252 4.331 4.411
1.65 1.66 1.67 1.68 1.69
1.86 1.87 1.88 1.89
1.90 1.91 1.92 1.93 1.94
1.95
2.1 2.2 2.3 2.4
4.096
4.492
10.65 12.17 13.82
5.592 5.687 5.784
5.891 5.989 6.088 6.189 6.291
5.900
5.910
5.999
6.009
6.098 6.199 6.301
6.108 6.209 6.311
5.920 6.019 6.118 6.219 6.321
6.393 6.497 6.602 6.708 6.816
6.404 6.508 6.613 6.719 6.827
6.414 6.518 6.623 6.730 6.837
6.424 6.529 6.634 6.741 6.848
6.913 7.023 7.133 7.245 7.358
6.924 7.034 7.144 7.256 7.369
6.935 7.045 7.156 7.268 7.381
6.946 7.056 7.167 7.279 7.392
6.957 7.067 7.178 7.290 7.403
7.461 7.576 7.692 7.810 7.928
7.472 7.587 7.704 7.821 7.940
7.484 7.599 7.715 7.833 7.952
7.495 7.610 7.727 7.845 7.964
7.507 7.622 7.739 7.857 7.976
7.518 7.634 7.751 7.869 7.988
8.036 8.157 8.279 8.403 8.527
8.048 8.169 8.291 8.415 8.540
8.060 8.181 8.304 8.427 8.552
8.072 8.194 8.316 8.440 8.565
8.084 8.206 8.328 8.452 8.577
8.096 8.218 8.341 8.465 8.590
8.108 8.230 8.353 a.477 8.603
8.640 8.767 8.895 9.025 9.156
8.653 8.780 8.908 9.038 9.169
8.666 8.793 8.921 9.051 9.182
8.678 8.806 8.934 9.064 9.195
8.691 8.818 8.947 9.077 9.208
8.704 8.831 8.960 9.090 9.221
8.716 8.844 8.973 9.103 9.235
8.729 8.857 8.986 9.116 9.248
9.301 9.434 9.569 9.704 9.842
9.314 9.447 9.582 9.718 9.855
9.327 9.461 9.596
9.341 9.474 9.609
9.732
9.745
9.869
9.883
9.354 9.488 9.623 9.759 9.897
9.367 9.501 9.636 9.773 9.911
9.381 9.515
9.814
9.287 9.421 9.555 9.691 9.828
9.952
9.966
9.980
9.994
10.79 12.33 14.00
10.94 12.49 14.17
11.09 12.65 14.35
11.24 12.81 14.53
5.979 6.078 6.179 6.280 6.383 6.487 6.698 6.805
9.650
8
9
IO
11
12
13
14
9.787 9.925
10.008 9.94 11.39 12.98 14.71
Average Difference
14 10.08 11.54 13.14 14.89
r3= 31.0063andl/n3 =0.0322515+
10.22 11.70 13.31 15.07
10.36 11.85 13.48 15.25
10.50 12.01 13.65 15.44
14 15 16 18
MATHEMATICALTABLES&
UNITS&
SYSTEMSOF
WEIGHTS&
TABLE1.2-CUEIESOF
N
0
1
2
--
3
4
MEASURES
1-9
NUMBERS(continued)
5
6
8
9
Average Difference
2.5 2.6 2.7 2.8 2.9
15.62 17.58 19.68 21.95 24.39
15.81 17.78 19.90 22.19 24.64
16.00 17.98 20.12 22.43 24.90
16.19 18.19 20.35 22.67 25.15
16.39 18.40 20.57 22.91 25.41
16.58 18.61 20.80 23.15 25.67
16.78 18.82 21.02 23.39 25.93
16.97 19.03 21.25 23.64 26.20
17.17 19.25 21.48 23.89 26.46
17.37 19.47 21.72 24.14 26.73
20 21 23 24 26
3.0 3.1 3.2 3.3 3.4
27.00 29.79 32.77 35.94 39.30
27.27 30.08 33.08 36.26 39.65
27.54 30.37 33.39 36.59 40.00
27.82 30.66 33.70 36.93 40.35
28.09 30.96 34.01 37.26 40.71
28.37 31.26 34.33 37.60 41.06
28.65 31.55 34.65 37.93 41.42
28.93 31.86 34.97 38.27 41.78
29.22 32.16 35.29 38.61 42.14
29.50 32.46 35.61 38.96 42.51
28 30 32 34 36
3.5 3.6 3.7 3.8 3.9
42.88 46.66 50.65 54.87 59.32
43.24 47.05 51.06 55.31 59.78
43.61 47.44 51.48 55.74 60.24
43.99 47.83 51.90 56.18 60.70
44.36 48.23 52.31 56.62 61.16
44.74 48.63 52.73 57.07 61.63
45.12 49.03 53.16 57.51 62.10
45.50 49.43 53.58 57.96 62.57
45.88 49.84 54.01 58.41 63.04
46.27 50.24 54.44 58.86 63.52
39 40 42 44 47
4.0 4.1 4.2 4.3 4.4
64.00 68.92 74.09 79.51 85.18
64.48 69.43 74.62 80.08 85.77
64.96 69.93 75.15 80.62 86.35
65.45 70.44 75.69 81.18 86.94
65.94 70.96 76.23 81.75 87.53
66.43 71.47 76.77 82.31 88.12
66.92 71.99 77.31 82.88 88.72
67.42 72.51 77.85 83.45 89.31
67.92 73.03 78.40 84.03 89.92
68.42 73.56 78.95 84.60 90.52
49 52 54 58 59
4.5 4.6 4.6 4.7 4.8 4.9
91.12 97.34
91.73 97.97
92.35 98.61
92.96 99.25
93.58 99.90
94.82
95.44
96.07
96.70
103.8 110.6 117.6
104.5 111.3 118.4
105.2 112.0 119.1
105.8 112.7 119.8
106.5 113.4 120.6
94.20 100.54 100.5 107.2 114.1 121.3
101.2 107.9 114.8 122.0
101.8 108.5 115.5 122.8
102.5 109.2 116.2 123.5
103.2 109.9 116.9 124.3
62 64 7 7 7 7
5.0 5.1 5.2 5.3 5.4
125.0 132.7 140.6 148.9 157.5
125.8 133.4 141.4 149.7 158.3
126.5 134.2 142.2 150.6 159.2
127.3 135.0 143.1 151.4 160.1
128.0 135.8 143.9 152.3 161.0
128.8 136.6 144.7 153.1 161.9
129.6 137.4 145.5 154.0 162.8
130.3 138.2 146.4 154.9 163.7
131.1 139.0 147.2 155.7 164.6
131.9 139.8 148.0 156.6 165.5
5.5 5.6 5.7 5.8 5.9
166.4 175.6 185.2 195.1 205.4
167.3 176.6 186.2 196.1 206.4
168.2 177.5 187.1 197.1 207.5
169.1 178.5 188.1 198.2 208.5
170.0 179.4 189.1 199.2 209.6
171.0 180.4 190.1 200.2 210.6
171.9 181.3 191.1 201.2 211.7
172.8 182.3 192.1 202.3 212.8
173.7 183.3 193.1 203.3 213.8
174.7 184.2 194.1 204.3 214.9
6.0 6.1 6.2 6.3 6.4
216.0 227.0 238.3 250.0 262.1
217.1 228.1 239.5 251.2 263.4
218.2 229.2 240.6 252.4 264.6
219.3 230.3 241.8 253.6 265.8
220.3 231.5 243.0 254.8 267.1
221.4 232.6 244.1 256.0 268.3
222.5 233.7 245.3 257.3 269.6
223.6 234.9 246.5 258.5 270.8
224.8 236.0 247.7 259.7 272.1
225.9 237.2 248.9 260.9 273.4
11
6.5 6.6 6.7 6.8 6.9
274.6 287.5 300.8 314.4 328.5
275.9 288.8 302.1 315.8 329.9
277.2 290.1 303.5 317.2 331.4
278.4 291.4 304.8 318.6 332.8
279.7 292.8 306.2 320.0 334.3
281.0 294.1 307.5 321.4 335.7
282.3 295.4 308.9 322.8 337.2
283.6 298.7 310.3 324.2 338.6
284.9 298.1 311.7 325.7 340.1
286.2 299.4 313.0 327.1 341.5
13
7.0 7.1 7.2 7.3 7.4
343.0 357.9 373.2 389.0 405.2
344.5 359.4 374.8 390.6 406.9
345.9 360.9 376.4 392.2 408.5
347.4 362.5 377.9 393.8 410.2
348.9 364.0 379.5 395.4 411.8
350.4 365.5 381.1 397.1 413.5
351.9 367.1 382.7 398.7 415.2
353.4 368.6 384.2 400.3 416.8
354.9 370.1 385.8 401.9 418.5
356.4 371.7 387.4 403.6 420.2
15
7.5 7.6 7.7 7.8 7.9
421.9 439.0 456.5 474.6 493.0
423.8 440.7 458.3 476.4 494.9
425.3 442.5 460.1 478.2 496.8
427.0 444.2 461.9 480.0 498.7
428.7 445.9 463.7 481.9 500.6
430.4 447.7 465.5 483.7 502.5
432.1 449.5 467.3 485.6 504.4
433.8 451.2 469.1 487.4 506.3
435.5 453.0 470.9 489.3 508.2
437.2 454.8 472.7 491.2 510.1
8.0 8.1 8.2 8.3 8.4
512.0 531.4 551.4 571.8 592.7
513.9 533.4 553.4 573.9 594.8
515.8 535.4 555.4 575.9 596.9
517.8 535.4 557.4 578.0 599.1
519.7 539.4 559.5 580.1 601.2
521.7 541.3 561.5 582.2 603.4
523.6 543.3 583.6 584.3 605.5
525.6 545.3 565.6 586.4 607.6
527.5 547.3 567.7 588.5 609.8
529.5 549.4 569.7 590.6 612.0
r
3
=310063and
8
9
IO
12
14
18 17 18
19 20 21
1h3=O0322515+
(continuedon next page)
PETROLEUM
l-10
TABLE
N
2
0
1.2-CUBES
4
3
OF NUMBERS
ENGINEERING
HANDBOOK
(continued)
6
5
7
8
9
Average Difference
8.5 8.6 8.7 8.8 8.9
614.1 636.1 658.5 681.5 705.0
616.3 638.3 660.8 683.8 707.3
618.5 640.5 663.1 686.1 709.7
620.7 642.7 665.3 688.5 712.1
622.8 645.0 667.6 690.8 714.5
625.0 647.2 669.9 693.2 716.9
627.2 649.5 672.2 695.5 719.3
629.4 651.7 674.5 697.9 721.7
631.6 654.0 678.8 700.2 724.2
633.8 656.2 679.2 702.6 726.6
22
9.0 9.1 9.2 9.3 9.4
729.0 753.6 778.7 804.4 830.6
731.4 756.1 781.2 807.0 833.2
733.9 758.6 783.8 809.6 835.9
736.3 761 .O 786.3 812.2 838.6
738.8 763.6 788.9 814.8 841.2
741.2 766.1 791.5 817.4 043.9
743.7 768.6 794.0 820.0 846.6
746.1 771.1 796.6 822.7 849.3
748.6 773.6 799.2 825.3 852.0
751.1 776.2 801.8 827.9 854.7
25
9.5 9.6 9.7 9.8 9.9
857.4 884.7 912.7 941.2 970.3
860.1 887.5 915.5 944.1 973.2
862.8 890.3 918.3 947.0 976.2
865.5 893.1 921.2 949.9 979.1
868.3 895.8 924.0 952.8 982.1
871 .O 898.6 926.9 955.7 985.1
873.7 901.4 929.7 958.6 988.0
876.5 904.2 932.6 961.5 991 .o
879.2 907.0 935.4 964.4 994.0
882.0 909.9 938.3 967.4 997.0
10.0
1000.0
T
3
=31 0063 and 1/x3 =00322515+
23 24
26 27 28 29
MATHEMATICALTABLES
&UNITS
TABLE
N
0
1
1-11
&SYSTEMSOFWElGHTS&MEASURES
2
1.3-SQUARE
3
4
ROOTS
5
OF NUMBERS
6
7
8
9
1.0 1.1 1.2 1.3 1.4
1.000 1.049 1.095 1.140 1.183
1.005 1.054 1.100 1.145 1.187
1.010 1.058 1.105 1.149 1.192
1.015 1.083 1.109 1.153 1.196
1.020 1.068 1.114 1.158 1.200
1.025 1.072 1.118 1.162 1.204
1.030 1.077 1.122 1.166 1.208
1.034 1.082 1.127 1.170 1.212
1.039 1.088 1.131 1.175 1.217
1.044 1.091 1.136 1.179 1.221
1.5 1.6 1.7 1.8 1.9
1.255 1.265 1.304 1.342 1.378
1.229 1.269 1.308 1.345 1.382
1.233 1.273 1.311 1.349 1.386
1.237 1.277 1.315 1.353 1.389
1.241 1.281 1.319 1.356 1.393
1.245 1.285 1.323 1.360 1.396
1.249 1.288 1.327 1.364 1.400
1.253 1.292 1.330 1.367 1.404
1.257 1.296 1.334 1.371 1.407
1.261 1.300 1.338 1.375 1.411
2.0 2.1 2.2 2.3 2.4
1.414 1.449 1.483 1.517 1.549
1.418 1.453 1.487 1.520 1.552
1.421 1.456 1.490 1.523 1.556
1.425 1.459 1.493 1.526 1.559
1.428 1.463 1.497 1.530 1.562
1.432 1.466 1.500 1.533 1.565
1.435 1.470 1.503 1.536 1.568
1.439 1.473 1.507 1.539 1.572
1.442 1.476 1.510 1.543 1.575
1.446 1.480 1.513 1.546 1.578
2.5 2.6 2.7 2.8 2.9
1.581 1.612 1.643 1.673 1.703
1.584 1.616 1.646 1.676 1.706
1.587 1.619 1.649 1.679 1.709
1.591 1.622 1.652 1.682 1.712
1.594 1.625 1.655 1.685 1.715
1.597 1.628 1.658 1.688 1.718
1.600 1.631 1.661 1.691 1.720
1.603 1.634 1.664 1.694 1.723
1.606 1.637 1.667 1.697 1.726
1.609 1.640 1.670 1.700 1.729
3.0 3.1 3.2 3.3 3.4
1.732 1.761 1.789 1.817 1.844
1.735 1.764 1.792 1.819 1.847
1.738 1.766 1.794 1.822 1.849
1.741 1.769 1.797 1.825 1.852
1.744 1.772 1.800 1.828 1.855
1.746 1.775 1.803 1.830 1.857
1.749 1.778 1.806 1.833 1.860
1.752 1.780 1.808 1.836 1.863
1.755 1.783 1.811 1.838 1.885
1.758 1.786 1.814 1.841 1.868
3.5 3.6 3.7 3.8 3.9
1.871 1.897 1.924 1.949 1.975
1.873 1.900 1.926 1.952 1.977
1.876 1.903 1.929 1.954 1.980
1.879 1905 1.931 1.957 1.982
1.881 1.908 1.934 1.960 1.985
1.884 1.910 1.936 1.962 1.987
1.887 1.913 1.939 1.965 1.990
1.889 1.916 1.942 1.967 1.992
1.892 1.918 1.944 1.970 1.995
1.895 1.921 1.947 1.972 1.997
4.0 4.1 4.2 4.3 4.4
2.000 2.025 2.049 2.074 2.098
2.002 2.027 2.052 2.076 2.100
2.005 2.030 2.054 2.078 2.102
2.007 2.032 2.057 2.081 2.105
2.010 2.035 2.059 2.083 2.107
2.012 2.037 2.062 2.086 2.110
2.015 2.040 2.064 2.088 2.112
2.017 2.042 2.066 2.090 2.114
2.020 2.045 2.069 2.093 2.117
2.022 2.047 2.071 2.095 2.119
4.5 4.6 4.7 4.8 4.9
2.121 2.145 2.168 2.191 2.214
2.124 2.147 2.170 2.193 2.216
2.126 2.149 2.173 2.195 2.218
2.128 2.152 2.175 2.198 2.220
2.131 2.154 2.177 2.200 2.223
2.133 2.156 2.179 2.202 2.225
2.135 2.159 2.182 2.205 2.227
2.138 2.161 2.184 2.207 2.229
2.140 2.163 2.186 2.209 2.232
2.142 2.166 2.189 2.211 2.234
5.0 5.1 5.2 5.3 5.4
2.236 2.258 2.280 2.302 2.324
2.238 2.261 2.283 2.304 2.326
2.241 2.263 2.285 2.307 2.328
2.243 2.265 2.287 2.309 2.330
2.245 2.267 2.289 2.311 2.332
2.247 2.269 2.291 2.313 2.335
2.249 2.272 2.293 2.315 2.337
2.252 2.274 2.296 2.317 2.339
2.254 2.276 2.298 2.319 2.341
2.256 2.278 2.300 2.322 2.343
5.5 5.6 5.7 5.8 5.9
2.345 2.366 2.387 2.408 2.429
2.347 2.369 2.390 2.410 2.431
2.349 2.371 2.392 2.412 2.433
2.352 2.373 2.394 2.415 2.435
2.354 2.375 2.398 2.417 2.437
2.356 2.377 2.398 2.419 2.439
2.358 2.379 2.400 2.421 2.441
2.360 2.381 2.402 2.423 2.443
2.382 2.383 2.404 2.425 2.445
2.364 2.385 2.406 2.427 2.447
6.0 6.1 6.2 6.3 6.4
2.449 2.470 2.490 2.510 2.530
2.452 2.472 2.492 2.512 2.532
2.454 2.474 2.494 2.514 2.534
2.456 2.476 2.496 2.516 2.536
2.458 2.478 2.498 2.518 2.538
2.460 2.480 2.500 2.520 2.540
2.462 2.482 2.502 2.522 2.542
2.464 2.484 2.504 2.524 2.544
2.466 2.486 2.506 2.526 2.546
2.468 2.488 2.508 2.528 2.548
6.5 6.6 6.7 6.8 6.9
2.550 2.569 2.588 2.608 2.627
2.551 2.571 2.590 2.610 2.629
2.553 2.573 2.592 2.612 2.631
2.555 2.575 2.594 2.613 2.632
2.557 2.577 2.596 2.615 2.634
2.559 2.579 2.598 2.617 2.636
2.561 2.581 2.600 2.619 2.638
2.563 2.583 2.602 2.621 2.640
2.565 2.585 2.604 2.623 2.642
2.567 2.587 2.606 2.625 2.644
Average Difference 5 4
3
2
Exolanation of Table of Sauare Roots This table gives the value of fiforvaluesof Nfrom 1 to lOO,correcttofourfigures.(lnterpolated values maybe inerror by 1 in the fourthfigure). To findthe square root of a number N outside the range from 1 to 100, dividethe digitsof the number intoblocks oftwo(beginning with thedecimalpoint),and note thatmovingthedecimal ointtwo placesin N isequivalentto moving J--Y= 2718 5213, &%%=18.48, ~@%3=52.13, itone lace in the square root of N. For example, &%-8=1.648, +=00002718 001648, and Jo7oo2718=0.05213. (continuedon next page)
PETROLEUM
l-12
N
0
1
TABLE
1.3-SQUARE
2
3
ROOTS
4
ENGINEERING
OF NUMBERS(continued)
5
6
7
8
9
7.0 7.1 7.2 7.3 7.4
2.646 2.665 2.683 2.702 2.720
2.648 2.666 2.685 2.704 2.722
2.650 2.668 2.687 2.706 2.724
2.651 2.670 2.689 2.707 2.728
2.653 2.672 2.691 2.709 2.728
2.655 2.674 2.693 2.711 2.729
2.657 2.676 2.694 2.713 2.731
2.659 2.678 2.696 2.715 2.733
2.661 2.680 2.698 2.717 2.735
2.663 2.681 2.700 2.718 2.737
7.5 7.6 7.7 7.8 7.9
2.739 2.757 2.775 2.793 2.811
2.740 2.759 2.777 2.795 2.812
2.742 2.760 2.778 2.796 2.814
2.744 2.762 2.780 2.798 2.816
2.746 2.764 2.782 2.800 2.818
2.748 2.766 2.784 2.802 2.820
2.750 2.768 2.786 2.804 2.821
2.751 2.769 2.787 2.805 2.823
2.753 2.771 2.789 2.807 2.825
2.755 2.773 2.791 2.809 2.827
8.0 8.1 8.2 8.3 8.4
2.828 2.846 2.864 2.881 2.898
2.830 2.848 2.865 2.883 2.900
2.832 2.850 2.867 2.884 2.902
2.834 2.851 2.869 2.886 2.903
2.835 2.853 2.871 2.888 2.905
2.837 2.855 2.872 2.890 2.907
2.839 2.857 2.874 2.891 2.909
2.841 2.858 2.876 2.893 2.910
2.843 2.860 2.877 2.895 2.912
2.844 2.862 2.879 2.897 2.914
8.5 8.6 8.7 8.6 8.9
2.915 2.933 2.950 2.966 2.983
2.917 2.934 2.951 2.968 2.985
2.919 2.936 2.953 2.970 2.987
2.921 2.938 2.955 2.972 2.988
2.922 2.939 2.956 2.973 2.990
2.924 2.941 2.958 2.975 2.992
2.926 2.943 2.960 2.977 2.993
2.927 2.944 2.961 2.978 2.995
2.929 2.946 2.963 2.980 2.997
2.931 2.948 2.965 2.982 2.998
9.0 9.1 9.2 9.3 9.4
3.000 3.017 3.033 3.050 3.066
3.002 3.018 3.035 3.051 3.068
3.003 3.020 3.036 3.053 3.069
3.005 3.022 3.038 3.055 3.071
3.007 3.023 3.040 3.056 3.072
3.008 3.025 3.041 3.058 3.074
3.010 3.027 3.043 3.059 3.076
3.012 3.028 3.045 3.061 3.077
3.013 3.030 3.046 3.063 3.079
3.015 3.032 3.048 3.064 3.081
9.5 9.6 9.7 9.8 9.9
3.082 3.098 3.114 3.130 3.146
3.084 3.100 3.116 3.132 3.148
3.085 3.102 3.118 3.134 3.150
3.087 3.103 3.119 3.135 3.151
3.089 3.105 3.121 3.137 3.153
3.090 3.106 3.122 3.138 3.154
3.092 3.108 3.124 3.140 3.156
3.094 3.110 3.126 3.142 3.158
3.095 3.111 3.127 3.143 3.159
3.097 3.113 3.129 3.145 3.161
10.0 11.0 12.0 13.0 14.0
3.162 3.317 3.464 3.606 3.742
3.178 3.332 3.479 3.619 3.755
3.194 3.347 3.493 3.633 3.768
3.209 3.362 3.507 3.647 3.782
3.225 3.376 3.521 3.661 3.795
3.240 3.391 3.536 3.674 3.808
3.256 3.406 3.550 3.688 3.821
3.271 3.421 3.564 3.701 3.834
3.286 3.435 3.578 3.715 3.847
3.302 3.450 3.592 3.728 3.860
15.0 16.0 17.0 18.0 19.0
3.873 4.000 4.123 4.243 4.359
3.886 4.012 4.135 4.254 4.370
3.899 4.025 4.147 4.266 4.382
3.912 4.037 4.159 4.278 4.393
3.924 4.050 4.171 4.290 4.405
3.937 4.062 4.183 4.301 4.416
3.950 4.074 4.195 4.313 4.427
3.962 4.087 4.207 4.324 4.438
3.975 4.099 4.219 4.336 4.450
3.987 4.111 4.231 4.347 4.461
20.0 21.0 22.0 23.0 24.0
4.472 4.583 4.690 4.796 4.899
4.483 4.593 4.701 4.806 4.909
4.494 4.604 4.712 4.817 4.919
4.506 4.615 4.722 4.827 4.930
4.517 4.626 4.733 4.837 4.940
4.528 4.637 4.743 4.848 4.950
4.539 4.648 4.754 4.858 4.960
4.550 4.658 4.764 4.868 4.970
4.561 4.669 4.775 4.879 4.980
4.572 4.680 4.785 4.889 4.990
25.0 26.0 27.0 28.0 29.0
5.000 5.099 5.196 5.292 5.385
5.010 5.109 5.206 5.301 5.394
5.020 5.119 5.215 5.310 5.404
5.030 5.128 5.225 5.320 5.413
5.040 5.138 5.235 5.329 5.422
5.050 5.148 5.244 5.339 5.431
5.060 5.158 5.254 5.348 5.441
5.070 5.167 5.263 5.357 5.450
5.079 5.177 5.273 5.367 5.459
5.089 5.187 5.282 5.376 5.468
30.0 31.0 32.0 33.0 34.0
5.477 5.568 5.657 5.745 5.831
5.486 5.577 5.666 5.753 5.840
5.495 5.586 5.675 5.762 5.848
5.505 5.595 5.683 5.771 5.857
5.514 5.604 5.692 5.779 5.865
5.523 5.612 5.701 5.788 5.874
5.532 5.621 5.710 5.797 5.882
5.541 5.630 5.718 5.805 5.891
5.550 5.639 5.727 5.814 5.899
5.559 5.648 5.736 5.822 5.908
35.0 36.0 37.0 38.0 39.0
5.916 6.000 6.083 6.164 6.245
5.925 6.008 6.091 6.173 6.253
5.933 6.017 6.099 6.181 6.281
5.941 6.025 6.107 6.189 6.269
5.950 6.033 6.116 6.197 6.277
5.958 6.042 6.124 6.205 6.285
5.967 6.050 6.132 6.213 6.293
5.975 6.058 6.140 6.221 6.301
5.983 6.066 6.148 6.229 6.309
5.992 6.075 6.156 6.237 6.317
Vr=i.77245+.
l/V'*=O.56419,
HANDBOOK
V,*/Z=l
25331, and ~e=,.64872
Average Difference 2
16 15 14 13 12
11
10
9
8
MATHEMATICALTABLES&
N
UNITS&
0
SYSTEMSOFWElGHTS&
TABLE
1.3-SQUARE
2
3
1
MEASURES
ROOTS
1-13
OF NUMBERS(continued)
4
5
6
7
8
9
Average Difference
40.0 41 0 42.0 43.0 44.0
6.325 6.403 6.481 6.557 6.633
6.332 6.411 6.488 6.565 6.641
6.340 6.419 6.496 6.573 6.648
6.348 6.427 6.504 6.580 6.656
6.356 6.434 6.512 6.588 6.663
6.364 6.442 6.519 6.595 6.671
6.372 6.450 6.527 6.603 6.678
6.380 6.458 6.535 6.611 6.686
6.387 6.465 6.542 6.618 6.693
6.395 6.473 6.550 6.626 6.701
8
45.0 46.0 47.0 48.0 49.0
6.708 6.782 6.856 6.928 7.000
6.716 6.790 6.863 6.935 7.007
6.723 6.797 6.870 6.943 7.014
6.731 6.804 6.877 6.950 7.021
6.738 6.812 6.885 6.957 7.029
6.745 6.819 6.892 6.964 7.036
6.753 6.826 6.899 6.971 7.043
6.760 6.834 6.907 6.979 7.050
6.768 6.841 6.914 6.986 7.057
6.775 6.848 6.921 6.993 7.064
7
50.0 51.0 52.0 53.0 54.0
7.071 7.141 7.211 7.280 7.348
7.078 7.148 7.218 7.287 7.355
7.085 7.155 7.225 7.294 7.362
7.092 7.162 7.232 7.301 7.369
7.099 7.169 7.239 7.308 7.376
7.106 7.176 7.246 7.314 7.382
7.113 7.183 7.253 7.321 7.389
7.120 7.190 7.259 7.328 7.396
7.127 7.197 7.266 7.335 7.403
7.134 7.204 7.273 7.342 7.409
7
55.0 56.0 57.0 56.0 59.0
7.416 7.483 7.550 7.616 7.681
7.423 7.490 7.556 7.622 7.688
7.430 7.497 7.563 7.629 7.694
7.436 7.503 7.570 7.635 7.701
7.443 7.510 7.576 7.642 7.707
7.450 7.517 7.583 7.649 7.714
7.457 7.523 7.589 7.655 7.720
7.463 7.530 7.596 7.662 7.727
7.470 7.537 7.603 7.668 7.733
7.477 7.543 7.609 7.675 7.740
60.0 61.0 62.0 63.0 64.0
7.746 7.810 7.874 7.937 8.000
7.752 7.817 7.880 7.944 8.006
7.759 7.823 7.887 7.950 8.012
7.765 7.829 7.893 7.956 8.019
7.772 7.836 7.899 7.962 8.025
7.778 7.842 7.906 7.969 8.031
7.785 7.849 7.912 7.975 8.037
7.791 7.855 7.918 7.981 8.044
7.797 7.861 7.925 7.987 8.050
7.804 7.868 7.931 7.994 8.056
65.0 66.0 67.0 68.0 69.0
8.062 8.124 8.185 8.246 8.307
8.068 8.130 8.191 8.252 8.313
8.075 8.136 8.198 8.258 8.319
8.081 8.142 8.204 8.264 8.325
8.087 8.149 8.210 8.270 8.331
8.093 8.155 8.216 8.276 8.337
8.099 8.161 8.222 8.283 8.343
8.106 8.167 8.228 8.289 8.349
8.112 8.173 8.234 8.295 8.355
8.118 8.179 8.240 8.301 8.361
70.0 71.0 72.0 73.0 74.0
8.367 8.426 8.485 8.544 8.602
8.373 8.432 8.491 8.550 8.608
8.379 8.438 8.497 8.556 8.614
8.385 8.444 8.503 8.562 8.620
8.390 8.450 8.509 8.567 8.626
8.396 8.456 8.515 8.573 8.631
8.402 8.462 8.521 8.579 8.637
8.408 8.468 8.526 8.585 8.643
8.414 8.473 8.532 8.591 8.649
8.420 8.479 8.538 8.597 8.654
75.0 76.0 77.0 78.0 79.0
8.660 8.718 8.775 8.832 8.888
8.666 8.724 8.781 8.837 8.894
8.672 8.729 8.786 8.843 8.899
8.678 8.735 8.792 8.849 8.905
8.683 8.741 8.798 8.854 8.911
8.669 8.746 8.803 8.860 8.916
8.695 8.752 8.809 8.866 8.922
8.701 8.758 8.815 8.871 8.927
8.706 8.764 8.820 8.877 8.933
8.712 8.769 8.826 8.883 8.939
80.0 81.0 82.0 83.0 84.0
8.944 9.000 9.055 9.110 9.165
8.950 9.006 9.061 9.116 9.171
8.955 9.011 9.066 9.121 9.176
8.961 9.017 9.072 9.127 9.182
8.967 9.022 9.077 9.132 9.187
8.972 9.028 9.083 9.138 9.192
8.978 9.033 9.088 9.143 9.198
8.983 9.039 9.094 9.149 9.203
8.989 9.044 9.099 9.154 9.209
8.994 9.050 9.105 9.160 9.214
85.0 86.0 67.0 88.0 89.0
9.220 9.274 9.327 9.381 9.434
9.225 9.279 9.333 9.386 9.439
9.230 9.284 9.338 9.391 9.445
9.236 9.290 9.343 9.397 9.450
9.241 9.295 9.349 9.402 9.455
9.247 9.301 9.354 9.407 9.460
9.252 9.306 9.359 9.413 9.466
9.257 9.311 9.365 9.418 9.471
9.263 9.317 9.370 9.423 9.476
9.268 9.322 9.375 9.429 9.482
90.0 91.0 92.0 93.0 94.0
9.487 9.539 9.592 9.644 9.695
9.492 9.545 9.597 9.649 9.701
9.497 9.550 9.602 9.654 9.706
9.503 9.555 9.607 9.659 9.711
9.508 9.560 9.612 9.664 9.716
9.513 9.566 9.618 9.670 9.721
9.518 9.571 9.623 9.675 9.726
9.524 9.576 9.628 9.731
9.529 9.581 9.633 9.685 9.737
9.534 9.586 9.638 9.690 9.742
95.0 96.0 97.0 98.0 99.0
9.747 9.798 9.849 9.899 9.950
9.752 9.803 9.854 9.905 9.955
9.757 9.808 9.859 9.910 9.960
9.762 9.813 9.864 9.915 9.965
9.767 9.818 9.869 9.920 9.970
9.772 9.823 9.874 9.925 9.975
9.778 9.829 9.879 9.930 9.980
9.783 9.834 9.884 9.935 9.985
9.788 9.839 9.889 9.940 9.990
9.793 9.844 9.894 9.945 9.995
9.680
SQUAREROOTSOFCERTAlNFRACTlONS N
&i
'/2 0.7071'/a 0.5774 v3 0.8165 '/4 0.5000 v4 0.8660 '/s 0.4472 75 0.6325
N % a/5 '/6 5/s '/$ 2/7 3/7
Jii 0.7746 0.8944 0.4082 0.9129 0.3780 0.5345 0.6547
N
v%
0.7559 -% __ % 0.8452 % 0.9258 '/A 0.3536 % 0.6124 % 0.7906 '/a 0.9354
N -'/9 2/ % =/g '/g 8/s '/'2
J0.3333 0.4714 0.6667 0.7454 0.8819 0.9428 0.2887
N
fi
-0.64559/rss/1* y,p 0.7638 1%~ 0.9574 'h6 0.2500 3/ls 0.4330 %s 0.5590 ‘/,s 0.6614
N
-J%
0.7500 "A6 0.8292 '3/G 0.9014 '5/e 0.9662 '/!32 0.1768 '/6* 0.1250 'ho 0.1414
6
5
l-14
PETROLEUM
ENGINEERING
HANDBOOK
TABLEl.4-CUBEROOTSOFNUMBERS
-
N
-
0
1
2
3
4
5
6
7
8
9
Average Difference
1.0 1.1 1.2 1.3 1.4
1.000 1.032 1.063 1.091 1.119
1.003 1.035 1.066 1.094 1.121
1.007 1.038 1.069 1.097 1.124
1.010 1.042 1.071 1.100 1.127
1.013 1.045 1.074 1.102 I.129
1.016 1.048 1.077 1.105 1.132
1.020 1.051 1.080 1.108 1.134
1.023 1.054 1.083 1.111 1.137
1.026 1.057 1.086 1.113 1.140
1.029 1.060 1.089 1.116 1.142
3
1.5 1.6 1.7 1.8 1.9
1.145 1.170 1.193 1.216 1.239
1.147 1.172 1.196 1.219 1.241
1.150 I.174 1.198 1.221 1.243
1.152 I.177 1.200 1.223 1.245
1.155 1.179 1.203 1.225 1.247
1.157 1.182 1.205 1.228 1.249
1.160 1.184 1.207 1.230 1.251
1.162 1.186 1.210 1.232 1.254
1.165 1.189 1.212 1.234 1.256
1.167 1.191 1.214 1.236 1.258
2
2.0 2.1 2.2 2.3 2.4
1.260 1.281 1.301 1.320 1.339
1.262 1.283 1.303 1.322 1.341
1.264 1.285 1.305 1.324 1.343
1.266 1.287 1.306 1.326 1.344
1268 1.289 1.308 1.328 1.346
1.270 1.291 1.310 1.330 1.348
1.272 1.293 1.312 1.331 1.350
1.274 1.295 1.314 1.333 1.352
1.277 1.297 1.316 1.335 1.354
1.279 1.299 1.318 1.337 1.355
2.5 2.6 2.7 2.8 2.9
1.357 1.375 1.392 1.409 1.426
1.359 1.377 1.394 1.411 1.428
1.361 1.379 1.396 1.413 1.429
1.363 1.380 1.398 1.414 1.431
1.364 1.382 1.399 1.416 1.433
1.366 1.384 1.401 1.418 1.434
1.368 1.386 1.403 1.419 1.436
1.370 1.387 1.404 1.421 1.437
1.372 1.389 1.406 1.423 1.439
1.373 1.391 1.408 1.424 1.441
3.0 3.1 3.2 3.3 3.4
1.442 1.458 1.474 1.489 1.504
1.444 1.460 1.475 1.490 1.505
1.445 1.461 1.477 1.492 1.507
1.447 1.463 1.478 1.493 1.508
1.449 1.464 1.480 1.495 1.510
1.450 1.466 1.481 1.496 1.511
1.452 1.467 1.483 1.498 1.512
1.453 1.469 1.484 1.499 1.514
1.455 I.471 1.486 1.501 1.515
1.457 1.472 1.487 1.502 1.517
3.5 3.6 3.7 3.8 3.9
1.518 1.533 1.547 1.560 1.574
1.520 1.534 1.548 1562 1.575
1.521 1.535 1.549 1.563 1.577
1.523 1.537 1.551 1.565 1.578
1.524 1.538 1.552 1.566 1.579
1.525 1.540 1.554 1.567 1.581
1.527 1.541 1.555 1.569 1.582
1.528 I.542 1.556 1.570 1.583
1.530 1.544 1.558 1.571 1.585
1.531 1.545 I .559 1.573 1.586
4.0 4.1 4.2 4.3 4.4
1.567 1.601 1.613 1.626 1.639
1.589 1.602 1.615 1627 1.640
1.590 1.603 1.616 1.629 1.641
1.591 1.604 1.617 1.630 1.642
1.593 1.606 1.619 1.631 1.644
1.594 1.607 1.820 1.632 1.645
1.595 1.608 1.621 1.634 1.646
1.597 1.610 1.622 1.635 1.647
1.598 1.811 1.624 1.636 1.649
1.599 1.612 1.625 1.637 1.650
4.5 4.6 4.7 4.8 4.9
1.651 1.663 1.675 1.687 1.698
1.652 1.664 1.676 1.688 1.700
1.653 1.666 1.677 1.689 1.701
1.655 1.667 1.679 1.690 1.702
1.656 1.668 1.680 1.692 1.703
1.657 1.669 1.681 1.693 1.704
1.658 1.670 1.682 1.694 1.705
1.659 1.671 1.683 1.695 1.707
1.681 1.673 1.685 1.696 1.708
1.662 1.674 1.686 1.697 1.709
5.0 5.1 5.2 5.3 5.4
1.710 1.721 1.732 1.744 1.754
1.711 1.722 1.734 1.745 1.755
1.712 1.724 1.735 1.746 1.757
1.713 1.725 1.736 1.747 1.758
1.715 1.726 1.737 1.748 1.759
1.716 1.727 1.738 1.749 1.760
1.717 1.728 1.739 1.750 1.761
1.718 1.729 I.740 1.751 1.762
1.719 1.730 1.741 1.752 1.763
1.720 1.731 1.742 1.753 1.764
5.5 5.6 5.7 5.8 5.9
1.765 1.776 1.786 1.797 1.807
1.766 1.777 1.787 1.798 1.808
1.767 1.778 1.788 1.799 1.809
1.768 1.779 1.789 1.800 1.810
1.769 1.780 1.790 1.801 1.811
I.771 1.781 1.792 1.802 1.812
1.772 1.782 1.793 1.803 1.813
1.773 1.783 1.794 1.804 1.814
1.774 1.784 1.795 1.805 1.815
1.775 1.785 1.796 1.806 1.816
6.0 6.1 6.2 6.3 6.4
1.817 1.827 1.837 1.847 1.857
1.818 1.828 1.838 1.848 1.858
1.819 1.829 1.839 1.849 1.859
1.820 1.830 1.840 1.850 1.860
1.821 1.831 1.841 1.851 1.860
1.822 1.832 1.842 1.852 1.861
1.823 1.833 1.843 1.853 1.862
1.824 1.834 1.844 1.854 1.883
1.825 1.835 1.845 1.855 1.864
1.826 1.836 1.846 1.856 1.865
6.5 6.6 6.7 6.8 6.9
1.866 1.876 1.885 1.895 1904
1.867 1.877 1.886 1.895 1.905
1.868 1.878 1.887 1.896 1.906
1.869 1.879 1.888 1.897 1.907
1.870 1.880 1.889 1.898 1.907
1.871 1.881 1.890 1.899 1.908
1.872 1.881 1.891 1.900 1.909
1.873 1.882 1.892 1.901 1.910
1.874 1.883 1.893 1.902 1.911
1.875 1.884 1.894 1.903 1.912
1
Explanation of Table of Cube Roots This tablegives the value of fi for values of N from 1 to 1,000,correctto four figures.(interpolated values may be in errorby 1 in the fourthfigure). To findthe square root of a number N outside the range from 1 to 1,000, dividethe digitsof the number intoblocks of three (beginning with the decimal point),and note that moving the decimal point fhree laces in column N is equivalentto moving itone lace in the cube root of N. For example, %%%? = 1.396, Kit = 3.007 ?/zix= 6.477 tb-?% =13.96 &iii6 =30.07, m =64.77, ?0.000002718 =0.01396, w =0.03007, and m =0.06477.
MATHEMATlCALTABLES&UNlTS
& SYSTEMSOFWElGHTS&
TABLE
N
0
1
2
1.4-CUBE
3
MEASURES
ROOTS
4
OF NUMBERS
5
6
1-15
(continued)
7
8
9
Average Difference
7.0 7.1 7.2 7.3 7.4
1.913 1.922 1.931 1.940 1.949
1.914 1.923 1.932 1.941 1.950
1.915 1.924 1.933 1.942 1.950
1.916 1.925 1.934 1.943 1.951
1.917 1.926 1.935 1.943 1.952
1.917 1.926 1.935 1.944 1.953
1.918 1.927 1.936 1.945 1.954
1.919 1.928 1.937 1.946 1.955
1.920 1.929 1.938 1.947 1.956
1.921 1.930 1.939 1.948 1.957
7.5 7.6 7.7 7.8 7.9
1.957 1.966 1.975 1.983 1.992
1.958 1.967 1.976 1.984 1.992
1.959 1.968 1.976 1.985 1.993
1.960 1.969 1.977 1.986 1.994
1.961 1.970 1.978 1.987 1.995
1.962 1.970 1.979 1.987 1.996
1.963 1.971 1.980 1.988 1.997
1.964 1.972 1.981 1.989 1.997
1.964 1.973 1.981 1.990 1.998
1.965 1.974 1.962 1.991 1.999
8.0 8.1 8.2 8.3 8.4
2.000 2.008 2.017 2.025 2.033
2.001 2.009 2.017 2.026 2.034
2.002 2.010 2.018 2.026 2.034
2.002 2.011 2.019 2027 2.035
2.003 2.012 2.020 2.028 2.036
2.004 2.012 2.021 2.029 2.037
2.005 2.013 2.021 2.030 2.038
2.006 2.014 2.022 2.030 2.038
2.007 2.015 2.023 2.031 2.039
2.007 2.016 2.024 2.032 2.040
8.5 8.6 8.7 8.8 8.9
2.041 2.049 2.057 2.065 2.072
2.042 2.050 2.057 2.065 2.073
2.042 2.050 2.058 2.066 2.074
2.043 2.051 2.059 2.067 2.075
2.044 2.052 2.060 2.068 2.075
2.045 2.053 2.061 2.068 2.076
2.046 2.054 2.061 2.069 2.077
2.046 2.054 2.062 2.070 2.078
2.047 2.055 2.063 2.071 2.079
2.046 2.056 2.064 2.072 2.079
9.0 9.1 9.2 9.3 9.4
2.080 2.088 2.095 2.103 2.110
2.081 2.089 2.096 2.104 2.111
2.082 2.089 2.097 2.104 2.112
2.082 2.090 2.098 2.105 2.113
2.083 2.091 2.098 2.106 2.113
2.084 2.092 2.099 2.107 2.114
2.085 2.092 2.100 2.107 2.115
2.085 2.093 2.101 2.108 2.116
2.086 2.094 2.101 2.109 2.116
2.087 2.095 2.102 2.110 2.117
9.5 9.6 9.7 9.8 9.9
2.118 2.125 2.133 2.140 2.147
2.119 2.126 2.133 2.141 2.148
2.119 2.127 2.134 2.141 2.149
2.120 2.128 2.135 2.142 2.149
2.121 2.128 2.136 2.143 2.150
2.122 2.129 2.136 2.144 2.151
2.122 2.130 2.137 2.144 2.152
2.123 2.130 2.138 2.145 2.152
2.124 2.131 2.139 2.146 2.153
2.125 2.132 2.139 2.147 2.154
10.0 11.0 12.0 13.0 14.0
2.154 2.224 2.289 2.351 2.410
2.162 2.231 2.296 2.357 2.416
2.169 2.237 2.302 2.363 2.422
2.176 2.244 2.308 2.369 2.427
2.183 2.251 2.315 2.375 2.433
2.190 2.257 2.321 2.381 2.438
2.197 2.264 2.327 2.387 2.444
2.204 2.270 2.333 2.393 2.450
2.210 2.277 2.339 2.399 2.455
2.217 2.263 2.345 2.404 2.461
7 6
15.0 16.0 17.0 18.0 19.0
2.466 2.520 2.571 2.621 2.668
2.472 2.525 2.576 2.626 2.673
2.477 2.530 2.581 2.630 2.678
2.483 2.535 2.586 2.635 2.682
2.488 2.541 2.591 2.640 2.687
2.493 2.546 2.596 2.645 2.692
2.499 2.551 2.601 2.650 2.696
2.504 2.556 2.606 2.654 2.701
2.509 2.561 2.611 2.659 2.705
2.515 2.566 2.616 2.664 2.710
5
20.0 21.0 22.0 23.0 24.0
2.714 2.759 2.802 2.844 2.884
2.719 2.763 2.806 2.648 2.888
2.723 2.768 2.811 2.852 2.892
2.728 2.772 2.815 2.856 2.896
2.732 2.776 2.819 2.860 2.900
2.737 2.781 2.823 2.864 2.904
2.741 2.785 2.827 2.868 2.908
2.746 2.789 2.831 2.872 2.912
2.750 2.794 2.836 2.876 2.916
2.755 2.798 2.840 2.880 2.920
4
25.0 26.0 27.0 28.0 29.0
2.924 2.962 3.000 3.037 3.072
2.928 2.966 3.004 3.040 3.076
2.932 2.970 3.007 3.044 3.079
2.936 2.974 3.011 3.047 3.083
2.940 2.978 3.015 3.051 3.086
2.943 2.981 3.018 3.055 3.090
2.947 2.985 3.022 3.058 3.093
2.951 2.989 3.026 3.062 3.097
2.955 2.993 3.029 3.065 3.100
2.959 2.996 3.033 3.069 3.104
30.0 31.0 32.0 33.0 34.0
3.107 3.141 3.175 3.208 3.240
3.111 3.145 3.178 3.211 3.243
3.114 3.148 3.181 3.214 3.246
3.118 3.151 3.185 3.217 3.249
3.121 3.155 3.188 3.220 3.252
3.124 3.158 3.191 3.224 3.255
3.128 3.162 3.195 3.227 3.259
3.131 3.165 3.198 3.230 3.262
3.135 3.168 3.201 3.233 3.265
3.138 3.171 3.204 3.236 3.268
35.0 36.0 37.0 38.0 39.0
3.271 3.302 3.332 3.362 3.391
3.274 3.305 3.335 3.365 3.394
3.277 3.308 3.338 3.368 3.397
3.280 3.311 3.341 3.371 3.400
3.283 3.314 3.344 3.374 3.403
3.287 3.317 3.347 3.377 3.406
3.290 3.320 3.350 3.380 3.409
3.293 3.323 3.353 3.382 3.411
3.296 3.326 3.356 3.385 3.414
3.299 3.329 3.359 3.388 3.417
-=14&%59aI
1
3
nd I/ 3- x=0 592794
(continued
on next page)
1-16
PETROLEUM
-
N
TABLE
1.4-CUBE
ROOTS
0
1
2
3
40.0 41.0 42.0 43.0 44.0
3.420 3.448 3.476 3.503 3.530
3.423 3.451 3.479 3.506 3.533
3.426 3.454 3.482 3.509 3.536
3.428 3.457 3.484 3.512 3.538
3.431 3.459 3.487 3.514 3.541
45.0 46.0 47.0 48.0 49.0
3.557 3.583 3.609 3.634 3.659
3.560 3.586 3.611 3.637 3.662
3.562 3.566 3.614 3.639 3.664
3.565 3.591 3.616 3.642 3.867
50.0 51.0 52.0 53.0 54.0
3.684 3.708 3.733 3.756 3.780
3.686 3.711 3.735 3.759 3.782
3.689 3.713 3.737 3.761 3.784
55.0 56.0 57.0 58.0 59.0
3.803 3.826 3.849 3.871 3.893
3.805 3.828 3.851 3.873 3.895
60.0 61.0 62.0 63.0 64.0
3.915 3.936 3.958 3.979 4.000
65.0 66.0 67.0 68.0 69.0
OF NUMBERS
7
8
9
3.434 3.462 3.490 3.517 3.544
3.437 3.465 3.493 3.520 3.546
3.440 3.468 3.495 3.522 3.549
3.443 3.471 3.498 3.525 3.552
3.445 3.473 3.501 3.528 3.554
3.567 3.593 3.619 3.644 3.669
3.570 3.596 3.622 3.647 3.672
3.573 3.599 3.624 3.649 3.674
3.575 3.601 3.627 3.652 3.677
3.578 3.604 3.629 3.654 3.679
3.580 3.606 3.632 3.657 3.682
3.691 3.716 3.740 3.763 3.787
3.694 3.718 3.742 3.766 3.789
3.696 3.721 3.744 3.768 3.791
3.699 3.723 3.747 3.770 3.794
3.701 3.725 3.749 3.773 3.796
3.704 3.728 3.752 3.775 3.798
3.706 3.730 3.754 3.777 3.801
3.808 3.630 3.853 3.875 3.897
3.810 3.833 3.855 3.878 3.900
3.812 3.835 3.857 3.880 3.902
3.814 3.837 3.860 3.882 3.904
3.817 3.839 3.862 3.884 3.906
3.819 3.842 3.864 3.886 3.908
3.821 3.844 3.866 3.889 3.911
3.824 3.846 3.869 3.891 3.913
3.917 3.939 3.960 3.981 4.002
3.919 3.941 3.962 3.983 4.004
3.921 3.943 3.964 3.985 4.006
3.924 3.945 3.966 3.987 4.008
3.926 3.947 3.968 3.990 4.010
3.928 3.949 3.971 3.992 4.012
3.930 3.951 3.973 3.994 4.015
3.932 3.954 3.975 3.996 4.017
3.934 3.956 3.977 3.998 4.019
4.021 4.041 4.062 4.082 4.102
4.023 4.043 4.064 4.084 4.104
4.025 4.045 4.066 4.086 4.106
4.027 4.047 4.068 4.088 4.108
4.029 4.049 4.070 4.090 4.109
4.031 4.051 4.072 4.092 4.111
4.033 4.053 4.074 4.094 4.113
4.035 4.055 4.076 4.096 4.115
4.037 4.058 4.078 4.098 4.117
4.039 4.060 4.080 4.100 4.119
70.0 71.0 72.0 73.0 74.0
4.121 4.141 4.160 4.179 4.198
4.123 4.143 4.162 4.181 4.200
4.125 4.145 4.164 4.183 4.202
4.127 4.147 4.166 4.185 4.204
4.129 4.149 4.168 4.187 4.206
4.131 4.151 4.170 4.189 4.208
4.133 4.152 4.172 4.191 4.210
4.135 4.154 4.174 4.193 4.212
4.137 4.156 4.176 4.195 4.213
4.139 4.158 4.177 4.196 4.215
75.0 76.0 77.0 78.0 79.0
4.217 4.236 4.254 4.273 4.291
4.219 4.238 4.256 4.274 4.293
4.221 4.240 4.258 4.278 4.294
4.223 4.241 4.260 4.278 4.296
4.225 4.243 4.262 4.280 4.298
4.227 4.245 4.264 4.282 4.300
4.228 4.247 4.265 4.284 4.302
4.230 4.249 4.267 4.285 4.303
4.232 4.251 4.269 4.287 4.305
4.234 4.252 4.271 4.289 4.307
80.0 81.0 82.0 83.0 84.0
4.309 4.327 4.344 4.362 4.380
4.311 4.329 4.346 4.364 4.381
4.312 4.330 4.348 4.366 4.383
4.314 4.332 4.350 4.367 4.365
4.316 4.334 4.352 4.369 4.366
4.318 4.336 4.353 4.371 4.388
4.320 4.337 4.355 4.373 4.390
4.321 4.339 4.357 4.374 4.392
4.323 4341 4.359 4.376 4.393
4.325 4.343 4.360 4.370 4.395
85.0 86.0 87.0 88.0 89.0
4.397 4.414 4.431 4.448 4.465
4.399 4.416 4.433 4.450 4.466
4.400 4.417 4.434 4.451 4.468
4.402 4.419 4.436 4.453 4.470
4.404 4.421 4.438 4.455 4.471
4.405 4.423 4.440 4.456 4.473
4.407 4.424 4.441 4.458 4.475
4.409 4.426 4.443 4.460 4.476
4.411 4.428 4.445 4.461 4.478
4.412 4.429 4.446 4.463 4.480
90.0 91.0 92.0 93.0 94.0
4.481 4.498 4.514 4.531 4.547
4.483 4.500 4.516 4.532 4.548
4.485 4.501 4.518 4.534 4.550
4.486 4.503 4.519 4.536 4.552
4.488 4.505 4.521 4.537 4.553
4.490 4.506 4.523 4.539 4.555
4.491 4.508 4.524 4.540 4.556
4.493 4.509 4.526 4.542 4.558
4.495 4.511 4.527 4.544 4.560
4.496 4.513 4.529 4.545 4.561
95.0 96.0 97.0 98.0 99.0
4.563 4.579 4.595 4.610 4.626
4.565 4.580 4.596 4.612 4.628
4.566 4.582 4.598 4.614 4.629
4.568 4.584 4.599 4.615 4.631
4.569 4.585 4.601 4.617 4.632
4.571 4.587 4.603 4.618 4.634
4.572 4.588 4.604 4.620 4.635
4.574 4.590 4.608 4.621 4.637
4.576 4.592 4.607 4.623 4.638
4.577 4.593 4.609 4.625 4.640
-
xc
HANDBOOK
(continued)
6
-
5
ENGINEERING
-
1 46459 and II a- T = 0 682784
Average Difference 3
2
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
TABLE 1.4-CUBE
N
0
1
--
2
3
& MEASURES
1-17
ROOTS OF NUMBERS (continued)
4
5
-
6
-
7
-
8
-
9
Average Difference
Cube roots of numbers from 100.0 to 499.0 4.642 4.791 4.932 5.066 5.192
4.657 4.806 4.946 5.079 5.205
4.672 4.820 4.960 5.092 5.217
4.688 4.835 4.973 5.104 5.229
18 19
5.313 5.429 5.540 5.646
5.325 5.440 5.550 5.657
5.337 5.451 5.561 5.667
5.360 5.474 5.583 5.888
5.749
5.759
5.769
5.346 5.463 5.572 5.677 5.779
20 21 22 23 24
5.848 5.944 6.037 6.127 6.214
5.858 5.953 6.046 6.136 6.223
5.867 5.963 8.055 6.145 8.232
5.877 5.972 6.064 6.153 6.240
5.887 5.981 6.073 6.162 6.249
5.896 5.991 6.082 6.171 8.257
25 26
6.308
6.316
6.391
6.399 6.479
;i 29
6.300 6.383 6.463 6.542 6.619
6.325 6.407 6.487 6.565 6.642
6.333 6.415 6.495 6.573 6.649
30 31 32 33 34
6.694 6.768 6.840 6.901 6.980
6.702 6.775 6.847 6.917
6.986
6.782 6.854 6.924 6.993
6.717 6.790 6.861 6.931 7.000
35 36 37 38 39
7.047 7.114 7.179 7.243 7.306
7.054 7.120 7.186 7.250 7.312
7.061 7.127 7.192 7.256 7.319
40 41 42 43 44
7.368 7.429 7.489 7.548 7.606
7.374 7.435 7.495 7.554 7.612
45 46 47 48 49
7.663 7.719 7.775 7.830 7.884
7.669
50 51 52 53 54
7.937 7.990
7.942 7.995
8.041 8.093 8.143
55 56 57 58 59 60 61 62
10 11 12 13 14
15 16 17
5.040 5.168 5.290
4.777 4.919 5.053 5.180 5.301
5.815 5.718 5.819
5.406 5.518 5.625 5.729 5.82(
5.418 5.529 5.636 5.739 5.838
5.906 6.000 6.091 6.180 6.266
5.915 6.009 6.100
5.92! 6.Oli 6.109
6.188 6.274
6.197 6.283
5.934 8.028 6.118 6.206 6.291
6.341 6.423 6.503 6.581 6.657
6.350 8.431 6.511 8.589 8.664
6.358 6.439 6.519 6.596 6.672
6.366 6.447 6.527 6.604 6.679
6.374 6.455 6.534 6.611 6.667
8
6.724 6.797 6.868 6.938 7.007
6.731 6.804 6.875 6.945 7.014
6.739 6.811 8.882 6.952 7.020
6.746 6.818
6.753 6.826
6.761 6.833
7
6.889 6.959
6.896 6.966
8.903 6.973
7.027
7.034
7.041
7.067 7.133 7.198 7.262 7.325
7.074 7.140 7.205 7.268 7.331
7.081 7.147 7.211 7.275 7.337
7.087 7.153 7.218 7.281 7.343
7.094 7.160 7.224 7.287 7.350
7.101 7.166 7.230 7.294 7.356
7.107 7.173 7.237 7.300 7.362
7.380 7.441 7.501 7.560 7.617
7.386 7.447 7.507 7.565 7.623
7.393 7.453 7.513 7.571 7.629
7.399 7.459 7.518 7.577 7.635
7.405 7.465 7.524 7.563 7.640
7.411 7.471 7.530 7.589 7.646
7.417 7.477 7.536 7.594 7.652
7.423 7.463 7.542 7.600 7.657
7.725 7.780 7.835
7.674 7.731 7.786 7.841
7.680 7.736
7.686 7.742
7.791
7.797
7.889
7.894
7.846 7.900
7.851 7.905
7.691 7.747 7.802 7.857
7.697 7.753 7.808 7.862 7.916
7.703 7.758 7.813 7.868 7.921
7.708 7.764 7.819 7.873 7.926
7.714 7.769 7.824 7.878 7.932
6.471 6.550 6.627
6.558 6.634
6.709
4.703
4.849 4.987 5.117 5.241
5.789
4.718 4.863 5.000 5.130 5.254
4.733 4.877 5.013 5.143 5.266
4.747 4.891 5.027 5.155 5.278
5.372 5.485
5.363 5.496 5.604 5.708 5.809
5.395
5.593 5.698 5.799
7.910
5.507
Cube roots of numbers from 500.0 to 1.000.0 7.958 7.963 7.969 7.974 7.948 7.953
4.762
4.905
7.979
7.984
8.047 8.098 8.148
8.000 8.052 8.103 8.153
8.005 8.057 8.108 8.158
8.010 8.062 8.113 8.163
8.016 8.067 8.118 8.168
8.021 8.072 8.123 8.173
8.026 8.077 8.128 8.178
8.031 8.082 8.133 8.183
8.036 8.088 8.138 8.188
8.193 8.243 8.291 8.340 8.387
8.198 8.247 8.296 8.344 8.392
8.203 8.252 8.301 a.349 8.397
8.208 8.257 8.306 8.354 8.401
8.213 8.262 8.311 8.359 8.406
8.218 8.267 8.316 8.363 8.411
8.223 8.272 8.320 8.368 8.416
8.228 8.277 8.325 8.373 8.420
8.233 8.282 8.330 8.378 8.425
8.238 8.286 8.335 8.382 8.430
6":
8.434 8.481 8.527 8.573 8.618
8.439 8.486 8.532 6.577 8.622
8.444 8.490 8.536 8.582 8.627
8.448 8.495 8.541 8.586 8.631
8.453 6.499 8.545 8.591 8.636
8.458 8.504 8.550 8.595 8.640
8.462 8.509 8.554 8.600 8.645
8.487 8.513 8.559 8.604 8.649
8.472 6.518 8.564 8.609 8.853
8.476 8.522 8.568 8.613 8.658
65 66 67 68 69
8.662 8.707 8.750 8.794 8.837
8.667 8.711 8.755 8.798 8.841
8.671 6.715 8.759 8.802 8.845
8.676 8.720 8.763 8.607 8.849
8.680 8.724 8.768 8.811 8.854
8.685 6.729 8.772 8.815 8.858
8.689 8.733 8.776 8.819 8.862
8.693
8.698
8.737 8.781 8.824 8.866
8.742 8.785 8.828 8.871
8.702 8.746 8.789 8.632 8.875
?-i=
1 46459 and l/x=
15 14 13 12 11 10
9
6
0.662764
(contmed
on next page)
PETROLEUM
1-18
N
a
1
TABLE
1.4-CUBE
2
3
ROOTS
OF NUMBERS
4
5
ENGINEERING
(continued)
7
6
6
Average Difference
9
70 71 72 73 74
8.679 6.921 8.963 9.004 9.045
8.683 6.925 8.967 9.008 9.049
6.867 6.929 8.971 9.012 9.053
8.892 8.934 6.975 9.016 9.057
8.896 6.938 6.979 9.021 9.061
8.900 8.924 8.984 9.025 9.065
8.904 8.946 8.968 9.029 9.069
8.909 8.950 8.992 9.033 9.073
6.913 6.955 6.996 9.037 9.078
8.917 8.959 9.000 9.041 9.062
75 76 77 76 79
9.066 9.126 9.166 9.205 9.244
9.090 9.130 9.170 9.209 9.248
9.094 9.134 9.174 9.213 9.252
9.098 9.138 9.178 9.217 9.256
9.102 9.142 9.182 9.221 9.260
9.106 9.146 9.185 9.225 9.264
9.110 9.150 9.189 9.229 9.268
9.114 9.154 9.193 9.233 9.272
9.118 9.158 9.197 9.237 9.275
9.122 9.162 9.201 9.240 9.279
BO 81 82 83 64
9.283 9.322 9.360 9.396 9.435
9.267 9.326 9.364 9.402 9.439
9.291 9.329 9.366 9.405 9.443
9.295 9.333 9.371 9.409 9.447
9.299 9.337 9.375 9.413 9.450
9.302 9.341 9.379 9.417 9.454
9.306 9.345 9.383 9.420 9.456
9.310 9.348 9.366 9.424 9.462
9.314 9.352 9.390 9.428 9.465
9.318 9.356 9.394 9.432 9.469
85 86 87 88 69
9.473 9.510 9.546 9.583 9.619
9.476 9.513 9.550 9.586 9.623
9.480 9.517 9.554 9.590 9.626
9.484 9.521 9.557 9.594 9.630
9.486 9.524 9.561 9.597 9.633
9.491 9.528 9.565 9.601 9.637
9.495 9.532 9.568 9.605 9.641
9.499 9.535 9.572 9.608 9.644
9.502 9.539 9.576 9.612 9.646
9.506 9.543 9.579 9.615 9.651
90 91 92 93 94
9.655 9.691 9.726 9.761 9.796
9.656 9.694 9.729 9.764 9.799
9.662 9.698 9.733 9.766 9.803
9.666 9.701 9.736 9.771 9.806
9.669 9.705 9.740 9.775 9.810
9.673 9.706 9.743 9.776 9.813
9.676 9.712 9.747 9.762 9.617
9.680 9.715 9.750 9.765 9.620
9.683 9.719 9.754 9.789 9.824
9.687 9.722 9.758 9.792 9.627
95 96 97 96 99
9.630 9.865 9.899 9.933 9.967
9.634 9.868 9.902 9.936 9.970
9.637 9.872 9.906 9.940 9.973
9.841 9.875 9.909 9.943 9.977
9.844 9.879 9.913 9.946 9.980
9.846 9.882 9.916 9.950 9.983
9.651 9.885 9.919 9.953 9.987
9.655 9.669 9.923 9.956 9.990
9.858 9.892 9.926 9.960 9.993
9.861 9.696 9.930 9.963 9.997
100
4
10.00
CUBE %N% 0.7937 0.6934 0.8736 0.6300 0.9086 0.5648 0.7368
-3/5 % '/, y6 '/, +$ %
0.8434 0.9263 0.5503 0.9410 0.5226 0.6566 0.7539
ROOTS N% % % % '/6 %6 6/S
X8
OF CERTAIN
-
0.8296 0.6939 0.9499 0.5000 0.7211 0.8550 0.9565
K= 146459
N% '/9 2/9 4/ 79 x3 Y9 'A2
FRACTIONS -
~ 0.4807 0.6057 0.7631 0.6221 0.9196 0.9615 0.4368
and li r ~=0.682764
HANDBOOK
N
%2 %? .'"A2 %6 %6 %6 %6
-
% 0.7469 0.6355 0.9714 0.3969 0.5724 0.6786 0.7591
-
N %6 "/lj '3/16 's6 '/a2 '164
%o
% 0.8255 0.6826 0.9331 0.9767 0.3150 0.2500 0.2714
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
TABLEl.5-THREE-HALVES
N
1
0
1.154 3.043 5.458 8.302
2 1.315 3.263 5.724 8.607
3 1.482 3.466 5.995 8.917
4 1.657 3.718 6.269 9.230
l-19
& MEASURES
POWERS
5 1.837 3.953 6.546 9.546
OFNUMBERS
6 2.024 4.192 6.831 9.866
7 2.217 4.437 7.117 10.190 10.19
6
Average Difference
9
2.415 4.685 7.408 10.52
10.85
183 237 280 313 33
5.0 6.0 7.0 8.0 9.0
11.18 14.70 18.52 22.63 27.00
11.52 15.07 16.92 23.05 27.45
11.86 15.44 19.32 23.46 27.90
12.20 15.61 19.72 23.91 26.36
12.55 16.19 20.13 24.35 28.82
12.90 16.57 20.54 24.76 29.28
13.25 16.96 20.95 25.22 29.74
13.61 17.34 21.37 25.66 30.21
13.97 17.73 21.78 26.11 30.68
14.33 16.12 22.20 26.55 31.15
35 38 41 44 46
10.0 11.0 12.0 13.0 14.0
31.62 36.48 41.57 46.87 52.38
32.10 36.98 42.09 47.41 52.95
32.56 37.48 42.61 47.96 53.51
33.06 37.99 43.14 48.50 54.08
33.54 38.49 43.66 49.05 54.64
34.02 39.00 44.19 49.60 55.21
34.51 39.51 44.73 50.15 55.79
35.00 40.02 45.26 50.71 56.36
35.49 40.53 45.79 51.26 56.94
35.99 41.05 46.33 51.82 57.51
49 51 53 55 57
15.0 16.0 17.0 18.0 19.0
58.09 64.00 70.09 76.37 82.82
58.68 64.60 70.71 77.00 83.47
59.26 65.20 71.33 77.64 84.13
59.85 65.81 71.96 78.26 84.79
60.43 66.41 72.58 76.93 85.45
61.02 67.02 73.21 79.57 86.11
61.62 67.63 73.84 60.22 66.77
62.21 68.25 74.47 60.87 87.44
62.80 66.66 75.10 81.51 88.10
63.40 69.48 75.73 82.17 68.77
59
20.0 21.0 21.0 22.0 23.0 24.0
89.44 96.23
90.11 96.92
90.79 97.61
91.46 98.30
92.14 99.00
92.82 99.69
94.18
94.86
95.55
103.2 110.3 117.6
103.9 111.0 118.3
104.6 111.7 119.0
105.3 112.5 119.8
106.0 113.2 120.5
106.7 113.9 121.3
93.50 100.38 100.4 107.4 114.6 122.0
101.1 108.2 115.4 122.8
101.8 108.9 116.1 123.5
102.5 109.6 116.8 124.3
66 69 7 7 7 7
25.0 26.0 27.0 28.0 29.0
125.0 132.6 140.3 148.2 156.2
125.8 133.3 141.1 149.0 157.0
126.5 134.1 141.9 149.8 157.8
127.3 134.9 142.6 150.5 158.6
128.0 135.6 143.4 151.3 159.4
128.8 136.4 144.2 152.1 160.2
129.5 137.2 145.0 153.0 161.9
130.3 138.0 145.8 153.8 161.9
131.0 138.7 146.6 154.6 162.7
131.8 139.5 147.4 155.4 163.5
30.0 31.0 32.0 33.0 34.0
164.3 172.6 181.0 189.6 198.3
165.1 173.4 181.9 190.4 199.1
166.0 174.3 182.7 191.3 200.0
166.8 175.1 183.6 192.2 200.9
167.6 176.0 184.4 193.0 201.8
168.4 176.8 185.3 193.9 202.6
169.3 177.6 186.1 194.8 203.5
170.1 178.5 187.0 195.6 204.4
170.9 179.3 187.9 196.5 205.3
171.8 180.2 188.7 197.4 206.2
6 0 9 9 9
35.0 36.0 37.0 38.0 39.0
207.1 216.0 225.1 234.2 243.6
208.0 216.9 226.0 235.2 244.5
208.8 217.8 226.9 236.1 245.4
209.7 218.7 227.6 237.0 246.4
210.6 219.6 226.7 238.0 247.3
211.5 220.5 229.6 238.9 246.3
212.4 221.4 230.6 239.8 249.2
213.3 222.3 231.5 240.8 250.1
214.2 223.2 232.4 241.7 251.1
215.1 224.2 233.3 242.6 252.0
9 9 9
40.0 41.0 42.0 43.0 44.0
253.0 262.5 272.2 282.0 291.9
253.9 263.5 273.2 283.0 292.9
254.9 264.5 274.1 283.9 293.9
255.6 265.4 275.1 264.9 294.9
256.8 266.4 276.1 285.9 295.9
257.7 267.3 277.1 286.9 296.9
258.7 266.3 278.0 267.9 297.9
259.7 269.3 279.0 288.9 298.9
260.6 270.2 280.0 269.9 299.9
261.6 271.2 281.0 290.9 300.9
10 IO 10 10 10
45.0 46.0 47.0 48.0 49.0
301.9 312.0 322.2 332.6 343.0
302.9 313.0 323.2 333.6 344.0
303.9 314.0 324.3 334.6 345.1
304.9 315.0 325.3 335.7 346.2
305.9 316.1 326.3 336.7 347.2
306.9 317.1 327.4 337.8 348.3
307.9 318.1 326.4 336.6 349.3
308.9 319.1 329.4 339.9 350.4
310.0 320.2 330.5 340.9 351.4
311 .o 321.2 331.5 342.0 352.5
IO 10 10 10 11
50.0 51.0 52.0 53.0 54.0
353.6 364.2 375.0 365.6 396.8
354.6 365.3 376.1 386.9 397.9
355.7 366.4 377.1 388.0 399.0
356.7 367.4 376.2 389.1 400.1
357.8 366.5 379.3 390.2 401.2
358.9 369.6 380.4 391.3 402.3
359.9 370.7 381.5 392.4 403.4
361.0 371.7 362.6 393.5 404.6
362.1 372.6 383.7 394.6 405.7
363.1 373.9 384.6 395.7 406.8
11 11 11 11 11
55.0 56.0 57.0 58.0 59.0
407.9 419.1 430.3 441.7 453.2
409.0 420.2 431.5 442.9 454.3
410.1 421.3 432.6 444.0 455.5
411.2 422.4 433.7 445.1 456.6
412.3 423.6 434.9 446.3 457.8
413.5 424.7 436.0 447.4 459.0
414.6 425.8 437.1 446.6 460.1
415.7 426.9 436.3 449.7 461.3
416.8 428.1 439.4 450.9 462.4
418.0 429.2 440.6 452.0 463.6
11 11 11 11 12
1.0 2.0 3.0 4.0 4.0
1.000 2.626 5.196 8.000
2.619 4.939 7.702
:A 65 66
i
Explanationof Table This tablegives N3” from N= 1 to N= 100. Moving the decimal point two places in N requiresmoving itthree places in body of table. For example, (7.23)3’” = 19.44, (723.)3”= 19,440, (0.0723)3’2 =0.01944, (72.3)3’2 =614.8, (7,230)3’ =614,800, and (0.723)3'2 =0.6148. Used inversely, thistable gwes M2’3 from M= 1 to M=l,OOO. For example, (0 6148)z3 =0.7230. (conhnued
on next page)
PETROLEUM
l-20
TABLE
--
N
0
1
2
1.5-THREE-HALVES
3
POWERS
4
ENGINEERINGHANDBOOK
OF NUMEERS(continued)
5
6
7
8
9
Average Difference
66.0 61.0 62.0 63.0 64.0
464.8 476.4 488.2 500.0 512.0
465.9 477.6 489.4 501.2 513.2
467.1 478.7 490.6 502.4 514.4
468.2 479.9 491.7 503.6 515.6
470.6 482.3 494.1 506.0 518.0
471.7 483.5 495.3 507.2 519.2
472.9
481.1 492.9 504.8 516.8
484.6 496.5 508.4 520.4
474.1 485.8 497.7 569.6 521.6
475.3 487.0 498.9 510.8 522.8
12 12 12 12 12
65.0 66.0 67.0 68.0
69.0
524.0 536.2 548.4 560.7 573.2
525.3 537.4 549.6 562.0 574.4
526.5 538.6 550.9 563.2 575.7
527.7 539.8 552.1 564.5 576.9
528.9 541.1 553.3 565.7 578.1
530.1 542.3 554.6 566.9 579.4
531.3 543.5 555.8 568.2 580.8
532.5 544.7 557.0 569.4 581.9
533.8 546.0 558.3 570.7 583.2
535.0 547.2 559.5 571.9 584.4
12 12 12 12 13
70.0 71.0 72.0 73.0 74.0
585.7 598.3 610.9 623.7 636.6
586.9 599.5 612.2 625.0 637.9
588.2 600.8 613.5 626.3 639.2
589.4 602.1 614.8 627.6 640.4
590.7 603.3 616.0 628.8 641.7
591.9 604.6 617.3 630.1 643.0
593.2 605.9 618.6 631.4 644.3
594.5 607.1 619.9 632.7 645.6
595.7 608.4 621.2 634.0 646.9
597.0 609.7 622.4 635.3 648.2
13 13 13 13 13
75.0 76.0 77.0 78.0 79.0
649.5 662.6 6757 688.9 702.2
650.8 663.9 677.0 690.2 703.5
652.1 665.2 678.3 691.5 704.8
653.4 686.5 679.6 692.9 706.2
654.7 867.8 680.9 694.2 707.5
656.0 669.1 682.3 695.5 708.8
657.3 670.4 683.6 696.8 710.2
658.6 671.7 684.9 898.2 711.5
659.9 673.0 686.2 699.5 712.9
661.2 674.4 687.6 700.8 714.2
13 13 13 13 13
60.0 81.0 62.0 83.0 84.0
715.5 729.0 742.5 756.2 769.9
716.9 730.4 743.9 757.5 771.2
718.2 731.7 745.3 758.9 772.6
719.6 733.1 746.6 760.3 774.0
720.9 734.4 748.0 761.6 775.4
722.3 735.8 749.3 763.0 776.8
723.6 737.1 750.7 764.4 778.1
725.0 738.5 752.1 765.8 779.5
726.3 739.8 753.4 767.1 780.9
727.7 741.2 754.8 768.5 782.3
13 14 14 14 14
85.0 86.0 87.0 88.0 89.0
783.7 797.5 811.5 825.5 839.6
785.0 798.9 812.9 826.9 841.0
786.4 800.3 814.3 828.3 842.5
787.8 801.7 815.7 829.7 843.9
789.2 803.1 817.1 831.1 845.3
790.6 804.5 818.5 832.6 848.7
792.0 805.9 819.9 834.0 848.1
793.4 807.3 821.3 835.4 849.5
794.8 808.7 822.7 836.8 851.0
796.1 810.1 824.1 838.2 852.4
14 14 14 14 14
90.0 91.0 92.0 93.0 94.0
853.8 868.1 882.4 896.9 911.4
855.2 869.5 883.9 898.3 912.8
856.7 870.9 885.3 899.8 914.3
858.1 872.4 886.8 901.2 915.7
859.5 873.8 888.2 902.7 917.2
860.9 875.2 889.6 904.1 918.6
862.4 876.7 891.1 905.6 920.1
863.8 878.1 892.5 907.0 921.6
865.2 879.6 894.0 908.5 923.0
886.7 881.0 895.4 909.9 924.5
14 14 14 15 15
95.0 96.0 97.0 98.0 99.0
925.9 940.6 955.3 970.2 985.0
927.4 942.1 956.8 971.6 986.5
928.9 943.5 958.3 973.1 988.0
930.3 945.0 959.8 974.6 989.5
931.8 946.5 961.3 976.1 991.0
933.3 948.0 962.7 977.6 992.5
934.7 949.4 964.2 979.1 994.0
936.2 950.9 985.7 980.6 995.5
937.7 952.4 967.2 982.1 997.0
939.1 953.9 968.7 983.5 998.5
E 15 15 15
100.0
469.4
l,ooo.o
AUXILIARY TABLE OF TWO-THIRDS POWERS AND THREE-HALVES POWERS
(to assist in locating the decimal point) For complete table of three-halvespowers, see preceding. That table,used inversely, providesa completetableoftwc-thirds powers. N 0.0001 0.001 0.01 0.1 1.0
10.0 100.0 l,ooo.o 10,000.0
/‘J”( = G) 0.002154 0.01 0.0464 0.2154 1.0 4.64 21.54 100.0 464.16
N”(=
d@)
0.000001 0.00003162 0.001 0.03162278 1.0 31.62278 l,ooo.o 31,622.78 1,000,000.0
MATHEMATICAL
TABLES
& UNITS 8 SYSTEMS
OF WEIGHTS
& MEASURES
l-21
1 ‘ABLE 1.6--RECIPR IOCALS 0 IF NUMBE :RS
N”
0
1.00 1 .Ol 1.02 1.03 1.04
0.9901 0.9804 0.9709 0.9615
1.05 1.06 1.07 1.08 1.09
1
2
0.9990
0.9980
0.9891
0.9881
0.9794 0.9699 0.9606
0.9785 0.9690 0.9597
0.9524 0.9434 0.9346 0.9259 0.9174
0.9515 0.9425 0.9337
0.9506
0.9251 0.9186
0.9416 0.9328 0.9242 0.9158
1.10 1.11 1.12 1.13 1.14
0.9091 0.9009 0.8929 0.8850 0.8772
0.9083 0.9001 0.8921 0.8842 0.8784
1.15 1.16 1.17 1.18 1.19
0.8696 0.8621 0.8547 0.8475 0.8403
1.20
3
0.9970 0.9872 0.9775 0.9681 0.9588
4
5
6
7
8
9
0.9960 0.9862 0.9786
0.9950 0.9852 0.9756 0.9662 0.9569
0.9940 0.9643 0.9747
0.9930 0.9833 0.9737 0.9643
0.9921 0.9823 0.9728
0.9671 0.9579
0.9653 0.9560
0.9551
0.9634 0.9542
0.9911 0.9814 0.9718 0.9625 0.9533
0.9461 0.9372 0.9285 0.9200 0.9116
0.9452 0.9363 0.9276 0.9191 0.9107
0.9443 0.9355 0.9268 0.9183 0.9099 0.9017
0.9479 0.9390
0.9234 0.9149
0.9488 0.9398 0.9311 0.9225 0.9141
0.9302 0.9217 0.9132
0.9470 0.9381 0.9294 0.9208 0.9124
0.9074 0.8993 0.8913 0.8834 0.8757
0.9066 0.8985 0.8905 0.8826 0.8749
0.9058 0.8977 0.8897 0.8818 0.8741
0.9050 0.8969 0.8889 0.8811 0.8734
0.9042 0.8961 0.8881 0.8803 0.8726
0.9033
0.8718
0.9025 0.8945 0.8865 0.8787 0.8711
0.8688 0.8613 0.8540 0.8487 0.8398
0.8681 0.8606 0.8532 0.8460 0.8389
0.8673 0.8598 0.8525 0.8453 0.8382
0.8666 0.8591 0.8518 0.8446 0.8375
0.8658 0.8584 0.8511 0.8439 0.8388
0.8651 0.8576 0.8503 0.8432 0.8361
0.8643 0.8569 0.8496 0.8425 0.8354
0.8636 0.8562 0.8489 0.8418 0.8347
0.8628 0.8554 0.6482 0.8410 0.8340
0.8333 0.8264 0.8197 0.8130 0.8065
0.8328 0.8258 0.8190 0.8123 0.8058
0.8319 0.8251 0.8183 0.8117 0.8052
0.8313 0.8244 0.8177 0.81IO 0.8045
0.8306 0.8237 0.8170 0.8104 0.8039
0.8299 0.8230 0.8163 0.8032
0.8292 0.8224 0.8157 0.8091 0.8026
0.8285 0.8217 0.8150 0.8084 0.8019
0.8278 0.8210 0.8143 0.8078 0.8013
0.8271 0.8203 0.8137 0.8071 0.8006
0.8000 0.7937 0.7874 0.7812 0.7752
0.7994 0.7930 0.7868 0.7806 0.7748
0.7987 0.7924 0.7862 0.7806 0.7740
0.7981 0.7918
0.7974 0.7911 0.7849 0.7788 0.7728
0.7968 0.7905 0.7843 0.7782 0.7722
0.7962 0.7899 0.7837 0.7776 0.7716
0.7955 0.7893 0.7831 0.7770 0.7710
0.7949 0.7886 0.7825 0.7764 0.7704
0.7943 0.7880 0.7819 0.7758 0.7898
1.31 1.32 1.33 1.34
0.7692 0.7634 0.7576 0.7519 0.7463
0.7686 0.7628 0.7570 0.7513 0.7457
0.7680 0.7822 0.7564 0.7508 0.7452
0.7559 0.7502 0.7446
0.7669 0.7610 0.7553 0.7496 0.7440
0.7683 0.7605 0.7547 0.7491 0.7435
0.7657 0.7599 0.7541 0.7485 0.7429
0.7651 0.7593 0.7536 0.7479 0.7424
0.7645 0.7587 0.7530 0.7474 0.7418
0.7639 0.7582 0.7524 0.7468 0.7413
1.36 1.36 1.37 1.38 1.39
0.7407 0.7353 0.7299 0.7246 0.7194
0.7402 0.7348 0.7294 0.7241 0.7189
0.7396 0.7342 0.7289 0.7236 0.7184
0.7391 0.7337 0.7283 0.7231 0.7179
0.7386 0.7331 0.7278 0.7225 0.7174
0.7380 0.7326 0.7273 0.7220 0.7168
0.7375 0.7321 0.7267 0.7215 0.7163
0.7369 0.7315 0.7262 0.7210 0.7158
0.7364 0.7310 0.7257 0.7205 0.7153
0.7358 0.7305 0.7252 0.7199 0.7148
0.7143
0.7138 0.7087 0.7037 0.6988 0.6940
0.7133 0.7082 0.7032 0.6983 0.6935
0.7128 0.7077 0.7027 0.6978 0.6930
0.7123 0.7072 0.7022 0.6974 0.6925
0.7117 0.7067 0.7018 0.6969 0.6920
0.7112 0.7062 0.7013 0.6964 0.6916
0.7107 0.7057 0.7008 0.6911
0.7102 0.7052 0.7003 0.6954 0.6906
0.7097 0.7047 0.6998 0.6949 0.6901
0.6892 0.6845 0.6798 0.6752 0.6707
0.6887 0.8840 0.6793 0.6748 0.6702
0.6882 0.8835 0.6789 0.6743 0.6698
0.6878 0.8831 0.6784 0.8739 0.6693
0.6873 0.6826 0.6780 0.8734 0.6689
0.6868 0.6821 0.6775 0.6729 0.6684
0.6863 0.6817 0.6770 0.6725 0.6680
0.6859 0.6812 0.6766 0.8720 0.6676
0.6854 0.6807 0.6761 0.6718 0.6671
0.6494
0.6489
0.6658 0.6614 0.6570 0.6527 0.6485
0.6653 0.6609 0.6566 0.6523 0.6481
0.6649 0.6805 0.6562 0.6519 0.6477
0.6645 0.8601 0.6557 0.6515 0.6472
0.6640 0.8596 0.6553 0.6510 0.6468
0.6636 0.6592
0.6536
0.6662 0.6618 0.6575 0.6532
0.6631 0.8588 0.6545 0.6502 0.6460
0.6627 0.6583 0.6540 0.6498 0.6456
1.21 1.22 1.23 1.24
1.25 1.26 1.27 1.28 1.29
1.30
1.40 1.41 1.42 1.43 1.44
1.45 1.48 1.47 1.48 1.49
1 so 1.51 1.52 1.53 1.54
0.7092 0.7042
0.6993 0.6944 0.6897 0.6849 0.6803 0.6757 0.6711 0.6667 0.6623
0.6579
0.9497 0.9407 0.9320
0.7855 0.7794 0.7734 0.7675 0.7616
0.8097
0.8953 0.8873
0.8795
0.6959
0.6549 0.6506 0.6464
Average Difference - 10
-9
-8
0.8937 0.8857 0.8780 0.8703 -7
-6
-5
-4
Explanation of Table of Reciprocals This table gives the values of i/N forvalues of N from 1 to 10, correctto four figures.(Interpolated values may be in errorby 1 in the fourthfigure.) To findthe reciprocalof a number N outside the range from 1 to 10, note that moving the decimal pointany number of places in eitherdirectionin Column N isequivalentto moving itthe same number of places in the opposite direction in the body of the table.For example, l/3.217=0.3109, 1/3,217=0.0003109, and 1/0.003217=310.9.
(continuedon next page)
PETROLEUM
1-22
TABLE
N
0
1
2
1.6--RECIPROCALS
-- 3
ENGINEERING
HANDBOOK
OF NUMBERS(continued)
4
5
6
7
8
9
Average Difference -4
1.55 1.56 1.57 1.58 1.59
0.6452 0.6410 0.8369 0.6329 0.6289
0.6447 0.6406 0.6365 0.6325 0.6285
0.6443 0.6402 0.6361 0.6321 0.6281
0.6439 0.6396 0.6357 0.6317 0.6277
0.6435 0.6394 0.6353 0.6313 0.6274
0.6431 0.6390 0.6349 0.6309 0.6270
0.6427 0.6366 0.6345 0.6305 0.6266
0.6423 0.6362 0.6341 0.6301 0.6262
0.6418 0.6376 0.6337 0.6297 0.6258
0.6414 0.6373 0.6333 0.6293 0.6254
1.60 1.61 1.62 1.63 1.64
0.6250 0.6211 0.6173 0.6135 0.6098
0.6246 0.6207 0.6169 0.6131 0.6094
0.6242 0.6203 0.6165 0.6127 0.6090
0.6238 0.6200 0.6161 0.6124 0.6086
0.6234 0.6196 0.6158 0.6120 0.6083
0.6231 0.6192 0.6154 0.6116 0.6079
0.6227 0.6168 0.6150 0.6112 0.6075
0.6223 0.6164 0.6146 0.6109 0.6072
0.6219 0.6180 0.6143 0.6105 0.6068
0.6215 0.6177 0.6139 0.6101 0.6064
1.65 1.66 1.67 1.66 1.a9
0.6061 0.6024 0.5988 0.5952 0.5917
0.6057 0.6020 0.5984 0.5949 0.5914
0.6053 0.6017 0.5981 0.5945 0.5910
0.6050 0.6013 0.5977 0.5942 0.5907
0.6046 0.6010 0.5974 0.5938 0.5903
0.6042 0.6006 0.5970 0.5935 0.5900
0.6039 0.6002 0.5967 0.5931 0.5896
0.6035 0.5999 0.5963 0.5926 0.5893
0.6031 0.5995 0.5959 0.5924 0.5889
0.6028 0.5992 0.5956 0.5921 0.5886
1.70 1.71 1.72 1.73 1.74
0.5882 0.5848 0.5814 0.5780 0.5747
0.5879 0.5645 0.5811 0.5777 0.5744
0.5875 0.5841 0.5807 0.5774 0.5741
0.5872 0.5638 0.5804 0.5770 0.5737
0.5669 0.5634 0.5800 0.5767 0.5734
0.5865 0.5831 0.5797 0.5764 0.5731
0.5862 0.5628 0.5794 0.5760 0.5727
0.5858 0.5824 0.5790 0.5757 0.5724
0.5855 0.5621 0.5787 0.5754 0.5721
0.5851 0.5617 0.5784 0.5750 0.5718
1.75 1.76 1.77 1.78 1.79
0.5714 0.5682 0.5650 0.5618 0.5587
0.5711 0.5679 0.5647 0.5615 05583
0.5708 0.5675 0.5643 0.5612 0.5580
0.5705 0.5672 0.5640 0.5609 0.5577
0.5701 0.5669 0.5637 0.5605 0.5574
0.5698 0.5666 0.5634 0.5602 05571
0.5695 0.5663 0.5631 0.5599 0.5568
0.5692 0.5659 0.5627 0.5596 0.5565
0.5688 0.5656 0.5624 0.5593 0.5562
0.5685 0.5653 0.5621 0.5590 0.5559
1.80 1.81 1.82 1.83 1.84
0.5556 0.5525 0.5495 0.5464 0.5435
0.5552 0.5522 0.5491 0.5461 0.5432
0.5549 0.5519 0.5488 0.5459 0.5429
0.5546 0.5516 0.5485 0.5456 0.5426
0.5543 0.5513 0.5482 0.5453 0.5423
0.5540 0.5510 0.5479 0.5450 0.5420
0.5537 0.5507 0.5476 0.5447 0.5417
0.5534 0.5504 0.5473 0.5444 0.5414
0.5531 0.5501 0.5470 0.5441 0.5411
0.5528 0.5496 0.5467 0.5438 0.5408
1.85 1.86 1.87 1.88 1.89
0.5405 0.5376 0.5348 0.5319 0.5291
0.5402 0.5373 0.5345 0.5316 0.5288
0.5400 0.5371 0.5342 0.5313 0.5285
0.5397 0.5368 0.5339 0.5311 0.5263
0.5394 0.5365 0.5336 0.5308 0.5280
0.5391 0.5362 0.5333 0.5305 0.5277
0.5388 0.5359 0.5330 0.5302 0.5274
0.5385 0.5356 0.5326 0.5299 0.5271
0.5382 0.5353 0.5325 0.5297 0.5269
0.5379 0.5350 0.5322 0.5294 0.5266
1.90 1.91 1.92 1.93 1.94
0.5263 0.5236 0.5206 0.5181 0.5155
0.5260 0.5233 0.5206 0.5179 0.5152
0.5256 0.5230 0.5203 0.5176 0.5149
0.5255 0.5227 0.5200 0.5173 0.5147
0.5252 0.5225 0.5198 0.5171 0.5144
0.5249 0.5222 0.5195 0.5166 0.5141
0.5247 0.5219 0.5192 0.5165 0.5139
0.5244 0.5216 0.5169 0.5163 0.5136
0.5241 0.5214 0.5167 0.5160 0.5133
0.5238 0.5211 0.5164 0.5157 0.5131
1.95 1.98 1.97 1.98 1.99
0.5128 0.5102 0.5076 0.5051 0.5025
0.5126 0.5099 0.5074 0.5048 0.5023
0.5123 0.5097 0.5071 0.5045 0.5020
0.5120 0.5094 0.5068 0.5043 0.5018
0.5118 0.5092 0.5066 0.5040 0.5015
0.5115 0.5089 0.5063 0.5038 0.5013
0.5112 0.5086 0.5061 0.5035 0.5010
0.5110 0.5084 0.5058 0.5033 0.5006
0.5107 0.5081 0.5056 0.5030 0.5005
0.5105 0.5079 0.5053 0.5028 0.5003
-2
2.0 2.1 2.2 2.3 2.4
0.5000 0.4762 0.4545 0.4348 0.4167
0.4975 0.4739 0.4525 0.4329 0.4149
0.4950 0.4717 0.4505 0.4310 0.4132
0.4926 0.4695 0.4484 0.4292 0.4115
0.4902 0.4673 0.4464 0.4274 0.4098
0.4878 0.4651 0.4444 0.4255 0.4082
0.4854 0.4630 0.4425 0.4237 0.4065
0.4831 0.4808 0.4405 0.4219 0.4049
0.4808 0.4587 0.4386 0.4202 0.4032
0.4785 0.4566 0.4367 0.4184 0.4016
-24 -21 -20 -16 -17
2.5 2.6 2.7 2.8 2.9
0.4000 0.3846 0.3704 0.3571 0.3448
0.3984 0.3831 0.3690 0.3559 0.3438
0.3966 0.3817 0.3676 0.3546 0.3425
0.3953 0.3802 0.3663 0.3534 0.3413
0.3937 0.3788 0.3650 0.3521 0.3401
0.3922 0.3774 0.3636 0.3509 0.3390
0.3906 0.3759 0.3623 0.3497 0.3378
0.3891 0.3745 0.3610 0.3484 0.3367
0.3676 0.3731 0.3597 0.3472 0.3356
0.3861 0.3717 0.3564 0.3460 0.3344
-15 -14 -13 -12 -12
3.0 3.1 3.2 3.3 3.4
0.3333 0.3226 0.3125 0.3030 0.2941
0.3322 0.3215 0.3115 0.3021 0.2933
0.3311 0.3205 0.3106 0.3012 0.2924
0.3300 0.3195 0.3096 0.3003 0.2915
0.3289 0.3185 0.3086 0.2994 0.2907
0.3279 0.3175 0.3077 0.2985 0.2899
0.3268 0.3165 0.3067 0.2976 0.2890
0.3257 0.3155 0.3058 0.2967 0.2882
0.3247 0.3145 0.3049 0.2959 0.2974
0.3236 0.3135 0.3040 0.2950 0.2865
-11 -10 -10 -9 -8
l,*=O
316310 and lk?=0.367679
-3
MATHEMATlCALTABLES&UNlTS
& SYSTEMS
TABLE
N
0
1
2
OF WEIGHTS
& MEASURES
1.6-REC :IPROCAI 3
3
1-23
OF NIUMBERS(<
4
5
6
:ontinue4
a
9
Average Difference
3.5 3.6 3.7 3.6 3.9
0.2857 0.2778 0.2703 0.2632 0.2564
0.2849 0.2770 0.2695 0.2625 0.2558
0.2841 0.2762 0.2688 0.2618 0.2551
0.2833 0.2755 0.2681 0.2611 0.2545
0.2825 0.2747 0.2674 0.2604 0.2538
0.2817 0.2740 0.2667 0.2597 0.2532
0.2809 0.2732 0.2660 0.2591 0.2525
0.2801 0.2725 0.2653 0.2584 0.2519
0.2793 0.2717 0.2646 0.2577 0.2513
0.2786 0.2710 0.2639 0.2571 0.2506
-8 -6 -7 -7 -6
4.0 4.1 4.2 4.3 4.4
0.2500 0.2439 0.2381 0.2326 0.2273
0.2494 0.2433 0.2375 0.2320 0.2268
0.2488 0.2427 0.2370 0.2315 0.2262
0.2461 0.2421 0.2364 0.2309 0.2257
0.2475 0.2415 0.2358 0.2304 0.2252
0.2469 0.2410 0.2353 0.2299 0.2247
0.2463 0.2404 0.2347 0.2294 0.2242
0.2457 0.2398 0.2342 0.2288 0.2237
0.2451 0.2392 0.2336 0.2283 0.2232
0.2445 0.2387 0.2331 0.2278 0.2227
-6 -6 -6 -5 -5
4.5 4.6 4.7 4.8 4.9
0.2222 0.2174 0.2128 0.2083 0.2041
0.2217 0.2169 0.2123 0.2079 0.2037
0.2212 0.2165 0.2119 0.2075 0.2033
0.2208 0.2160 0.2114 0.2070 0.2026
0.2203 0.2155 0.2110 0.2066 0.2024
0.2198 0.2151 0.2105 0.2062 0.2020
0.2193 0.2146 0.2101 0.2058 0.2016
0.2188 0.2141 0.2096 0.2053 0.2012
0.2183 0.2137 0.2092 0.2049 0.2008
0.2179 0.2132 0.2088 0.2045 0.2004
-5 -5 -4 -4 -4
5.0 5.1 5.2 5.3 5.4
0.2000 0.1961 0.1923 0.1887 0.1652
0.1996 0.1957 0.1919 0.1883 0.1848
0.1992 0.1953 0.1916 0.1880 0.1645
0.1986 0.1949 0.1912 0.1876 0.1642
0.1964 0.1946 0.1906 0.1873 0.1638
0.1980 0.1942 0.1905 0.1869 0.1835
0.1976 0.1938 0.1901 0.1866 0.1632
0.1972 0.1934 0.1696 0.1882 0.1626
0.1969 0.1931 0.1894 0.1859 0.1825
0.1965 0.1927 0.1890 0.1855 0.1621
-4
5.5 5.6 5.7 5.8 5.9
0.1818 0.1786 0.1754 0.1724 0.1695
0.1815 0.1783 0.1751 0.1721 0.1692
a.1812 0.1779 0.1748 0.1718 0.1669
0.1808 0.1776 0.1745 0.1715 0.1686
0.1805 0.1773 0.1742 0.1712 0.1684
0.1802 0.1770 0.1739 0.1709 0.1681
0.1799 0.1767 0.1736 0.1706 0.1676
0.1795 0.1764 0.1733 0.1704 0.1675
0.1792 0.1761 0.1730 0.1701 0.1672
0.1769 0.1757 0.1727 0.1698 0.1669
6.0 6.1 6.2 6.3 8.4
0.1667 0.1639 0.1613 0.1587 0.1563
0.1664 0.1637 0.1610 0.1585 0.1560
0.1661 0.1634 0.1608 0.1582 0.1558
0.1656 0.1631 0.1605 0.1580 0.1555
0.1656 0.1629 0.1603 0.1577 0.1553
0.1653 0.1626 0.1600 0.1575 0.1550
0.1650 0.1623 0.1597 0.1572 0.1548
0.1647 0.1621 0.1595 0.1570 0.1546
0.1645 0.1618 0.1592 0.1567 0.1543
0.1642 0.1616 0.1590 0.1565 0.1541
6.5 6.6 6.7 6.8 6.9
0.1538 0.1515 0.1493 0.1471 0.1449
0.1536 0.1513 0.1490 0.1468 0.1447
0.1534 0.1511 0.1488 0.1466 0.1445
0.1531 0.1508 0.1486 0.1464 0.1443
0.1529 0.1506 0.1484 0.1462 0.1441
0.1527 0.1504 0.1481 0.1460 0.1439
0.1524 0.1502 0.1479 0.1458 0.1437
0.1522 0.1499 0.1477 0.1456 0.1435
0.1520 0.1497 0.1475 0.1453 0.1433
0.1517 0.1495 0.1473 0.1451 0.1431
7.0 7.1 7.2 7.3 7.4
0.1429 0.1408 0.1389 0.1370 0.1351
0.1427 0.1406 0.1387 0.1368 0.1350
0.1425 0.1404 0.1385 0.1366 0.1348
0.1422 0.1403 0.1383 0.1364 0.1346
0.1420 0.1401 o.t38i 0.1362 0.1344
0.1418 0.1399 0.1379 0.1361 0.1342
0.1416 0.1397 0.1377 0.1359 0.1340
0.1414 0.1395 0.1376 0.1357 0.1339
0.1412 0.1393 0.1374 0.1355 0.1337
0.1410 0.1391 0.1372 0.1353 0.1335
7.5 7.6 7.7 7.6 7.9
0.1333 0.1316 0.1299 0.1262 0.1266
0.1332 0.1314 0.1297 0.1260 0.1264
0.1330 0.1312 0.1295 0.1279 0.1263
0.1328 0.1311 0.1294 0.1277 0.1261
0.1326 0.1309 0.1292 0.1276 0.1259
0.1325 0.1307 0.1290 0.1274 0.1258
0.1323 0.1305 0.1289 0.1272 0.1256
0.1321 0.1304 0.1287 0.1271 0.1255
0.1319 0.1302 0.1285 0.1269 0.1253
0.1318 0.1300 0.1284 0.1267 0.1252
8.0 6.1 a.2 6.3 8.4
0.1250 0.1235 0.1220 0.1205 0.1190
0.1248 0.1233 0.1216 0.1203 0.1189
0.1247 0.1232 0.1217 0.1202 0.1188
0.1245 0.1230 0.1215 0.1200 0.1186
0.1244 0.1229 0.1214 0.1199 0.1185
0.1242 0.1227 0.1212 0.1196 0.1183
0.1241 0.1225 0.1211 0.1196 0.1182
0.1239 0.1224 0.1209 0.1195 0.1181
0.1238 0.1222 0.1208 0.1193 0.1179
0.1236 0.1221 0.1206 0.1192 0.1176
9.5 6.6 8.7 8.8 8.9
0.1176 0.1163 0.1149 0.1136 0.1124
0.1175 0.1161 0.1148 0.1135 0.1122
0.1174 0.1160 0.1147 0.1134 0.1121
0.1172 0.1159 0.1145 0.1133 0.1120
0.1171 0.1157 0.1144 0.1131 0.1119
0.1170 0.1156 Q.1143 0.1130 0.1117
0.1168 0.1155 0.1142 0.1129 0.1116
0.1167 0.1153 0.1140 0.1127 0.1115
0.1166 0.1152 0.1139 0.1126 0.1114
0.1164 0.1151 0.1136 0.1125 0.1112
9.0 9.1 9.2 9.3 9.4
0.1111 0.1099 0.1087 0.1075 0.1064
0.1110 0.1098 0.1086 0.1074 0.1063
0.1109 0.1096 0.1085 0.1073 0.1062
0.1107 0.1095 0.1083 0.1072 0.1060
0.1106 0.1094 0.1082 0.1071 0.1059
0.1105 0.1093 0.1081 0.1070 0.1058
0.1104 0.1092 0.1080 0.1068 0.1057
0.1103 0.1091 0.1079 0.1067 0.1056
0.1101 0.1089 0.1078 0.1066 0.1055
0.1100 0.1088 0.1076 0.1065 0.1054
9.5 9.6 9.7 9.8 9.9
0.1053 0.1042 0.1031 0.1020 0.1010
0.1052 0.1041 0.1030 0.1019 0.1009
0.1050 0.1040 0.1029 0.1018 0.1008
0.1049 0.1038 0.1028 0.1017 0.1007
0.1048 0.1037 0.1027 0.1016 0.1006
0.1047 0.1036 0.1026 0.1015 0.1005
0.1046 0.1035 0.1025 0.1014 0.1004
0.1045 0.1034 0.1024 0.1013 0.1003
0.1044 0.1033 0.1022 0.1012 0.1002
0.1043 0.1032 0.1021 0.1011 0.1001
r=031a310
an* lie=0
367879
-3
-2
-1
PETROLEUM
1-24
TABLEl.7-CIRCUMFERENCESOFCIRCLESSY
d
0
1
2
3
4
5
ENGINEERINGHANDBOOK
HUNDREDTHS
6
7
8
9
1.0 1.1 1.2 1.3 1.4
3.142 3.456 3.770 4.084 4.398
3.173 3.487 3.801 4.115 4.430
3.204 3.519 3.633 4.147 4.461
3.236 3.550 3.864 4.178 4.492
3.267 3.581 3.696 4.210 4.524
3.299 3.613 3.927 4.241 4.555
3.330 3.644 3.958 4.273 4.587
3.362 3.676 3.990 4.304 4.618
3.393 3.707 4.021 4.335 4.650
3.424 3.738 4.053 4.367 4.681
1.5 1.6 1.7 1.8 1.9
4.712 5.027 5.341 5.655 5.969
4.744 5.058 5.372 5.686 6.000
4.775 5.069 5.484 5.718 6.032
4.807 5.121 5.435 5.749 6.063
4.838 5.152 5.466 5.781 6.095
4.869 5.184 5.498 5.812 6.126
4.901 5.215 5.529 5.843 6.158
4.932 5.246 5.561 5.875 6.189
4.964 5.278 5.592 5.906 6.220
4.995 5.309 5.623 5.938 6.252
2.0 2.1 2.2 2.3 2.4
6.283 6.597 6.912 7.226 7.540
6.315 6.629 6.943 7.257 7.571
6.346 6.680 6.974 7.288 7.683
6.377 6.692 7.006 7.320 7.634
6.409 6.723 7.037 7.351 7.665
6.440 6.754 7.069 7.383 7.697
6.472 6.786 7.100 7.414 7.728
6.503 6.817 7.131 7.446 7.760
6.535 6.849 7.163 7.477 7.791
6.566 6.660 7.194 7.508 7.823
2.5 2.6 2.7 2.6 2.9
7.854 8.168 6.462 6.796 9.111
7.685 8.200 8.514 8.828 9.142
7.917 6.231 8.545 8.859 9.173
7.948 8.262 6.577 8.891 9.205
7.980 6.294 8.606 8.922 9.236
8.011 8.325 6.639 8.954 9.266
8.042 8.357 8.671 8.985 9.299
8.074 8.388 8.702 9.016 9.331
8.105 8.419 6.734 9.048 9.362
8.137 8.451 8.765 9.079 9.393
3.0 3.1 3.1 3.2 3.3 3.4
9.425 9.739
9.456 9.770
9.466 9.602
9.519 9.833
9.550 9.865
9.562 9.896
9.613 9.927
9.645 9.959
9.676 9.990
10.05 10.37 10.68
10.08 10.40 10.71
10.12 10.43 10.74
10.15 10.46 10.78
lo.18 10.49 10.81
10.21 10.52 10.84
10.24 10.56 10.87
10.27 10.59 10.90
10.30 10.62 10.93
9.708 10.022 10.02 10.34 10.65 10.96
3.5 3.6 3.7 3.8 3.9
11.00 11.31 11.62 11.94 12.25
11.03 11.34 11.66 11.97 12.28
11.06 11.37 11.69 12.00 12.32
11.09 11.40 11.72 12.03 12.35
11.12 11.44 11.75 12.06 12.38
11.15 11.47 11.78 12.10 12.41
11.18 11.50 11.81 12.13 12.44
11.22 11.53 11.84 12.16 12.47
11.25 11.56 11.88 12.19 12.50
11.28 11.59 11.91 12.22 12.53
4.0 4.1 4.2 4.3 4.4
12.57 12.86 13.19 13.51 13.82
12.60 12.91 13.23 13.54 13.85
12.63 12.94 13.26 13.57 13.89
12.66 12.97 13.29 13.60 13.92
12.69 13.01 13.32 13.63 13.95
12.72 13.04 13.35 13.67 13.98
12.75 13.07 13.38 13.70 14.01
12.79 13.10 13.41 13.73 14.04
12.82 13.13 13.45 13.76 14.07
12.85 13.16 13.46 13.79 14.11
4.5 4.6 4.7 4.8 4.9
14.14 14.45 14.77 15.08 15.39
14.17 14.48 14.80 15.11 15.43
14.20 14.51 14.83 15.14 15.46
14.23 14.55 14.86 15.17 15.49
14.26 14.58 14.89 15.21 15.52
14.29 14.61 14.92 15.24 15.55
14.33 14.64 14.95 15.27 15.58
14.36 14.67 14.99 15.30 15.61
14.39 14.70 15.02 15.33 15.65
14.42 14.73 15.05 15.36 15.68
5.0 5.1 5.2 5.3 5.4
15.71 16.02 16.34 16.65 16.96
15.74 16.05 16.37 16.68 17.00
15.77 16.06 16.40 16.71 17.03
15.80 16.12 16.43 16.74 17.06
15.83 16.15 16.46 16.78 17.09
15.87 16.18 16.49 16.81 17.12
15.90 16.21 16.52 16.84 17.15
15.93 16.24 16.56 16.87 17.18
15.96 16.27 16.59 16.90 17.22
15.99 16.30 16.62 16.93 17.25
Average Difference 31
31 3
3
Exotanationof Table of Circumferences This table gives the product of % times any number d (diameter)from 1 to 10; i.e., itis a table of multiples01 r. Moving the decimal point one place in Column d is equivalentto moving itone place in the body of the table Circumference=ax d= 3.141593xd. Conversely, d= 1/rrxcircumference=0.31831xcircumference.
MATHEMATICALTABLES&
UNlTS&SYSTEMSOFWElGHTS&MEASURES
1-25
TABLE1.7-CIRCUMFERENCESOFCIRCLES
d
0
1
2
3
4
BY HUNDREDTHS(continued)
5
5.5 5.6 5.7 5.8 5.9
-17.31 17.28 17.59 17.91 18.22 18.54
17.62 17.94 18.25 18.57
17.34 17.66 17.97 18.28 16.60
17.37 17.69 18.00 18.32 18.63
17.40 17.72 18.03 18.35 18.66
17.4417.75 18.06 18.38 18.69
6.0 6.1 6.2 6.3 6.4
18.85 lg.16 19.48 19.79 20.11
18.88 19.20 19.51 19.82 20.14
18.91 19.23 19.54 19.85 20.17
18.94 19.26 19.57 19.89 20.20
18.98 19.29 19.60 19.92 20.23
19.01 19.32 19.63 19.95 20.26
6.5 6.6 6.7 6.8 6.9
20.42 20.73 21.05 21.36 21.68
20.45 20.77 21.08 21.39 21.71
20.48 20.80 21.11 21.43 21.74
20.51 20.83 21.14 21.46 21.77
20.55 20.86 21.17 21.49 21.80
7.0 7.1 7.2 7.3 7.4
21.99 22.31 22.62 22.93 23.25
22.02 22.34 22.65 22.97 23.28
22.05 22.37 22.68 23.00 23.31
22.09 22.40 22.71 23.03 23.34
7.5 7.6 7.7 7.8 7.9
23.56 23.88 24.19 24.50 24.82
23.59 23.91 24.22 24.54 24.85
23.62 23.94 24.25 24.57 24.88
0.0 8.1 8.2 8.3 8.4
25.13 25.45 25.76 26.08 26.39
25.16 25.48 25.79 26.11 26.42
a.5 8.6 8.7 8.8 8.9
26.70 27.02 27.33 27.65 27.96
9.0 9.1 9.2 9.3 9.4
6
7
6
9
17.47 17.5017.78 17.81 18.10 18.13 18.41 18.44 18.72 18.76
17.53 17.84 18.16 18.47 18.79
17.56 17.88 18.19 18.50 18.82
19.04 19.35 19.67 19.98 20.29
19.07 19.38 19.70 20.01 20.33
19.10 19.42 19.73 20.04 20.36
19.13 19.45 19.76 20.07 20.39
20.50 20.89 21.21 21.52 21.83
20.61 20.92 21.24 21.55 21.87
20.64 20.95 21.27 21.58 21.90
20.67 20.99 21.30 21.61 21.93
20.70 21.02 21.33 21.65 21.96
22.12 22.43 22.75 23.06 23.37
22.15 22.46 22.78 23.09 23.40
22.18 22.49 22.81 23.12 23.44
22.21 22.53 22.84 23.15 23.47
22.24 22.56 22.87 23.18 23.50
22.27 22.59 22.90 23.22 23.53
23.66 23.97 24.28 24.60 24.91
23.69 24.00 24.32 24.63 24.94
23.72 24.03 24.35 24.66 24.98
23.75 24.06 24.38 24.69 25.01
23.78 24.10 24.41 24.72 25.04
23.81 24.13 24.44 24.76 25.07
23.84 24.16 24.47 24.79 25.10
25.20 25.51 25.82 26.14 26.45
25.23 25.54 25.86 26.17 26.48
25.26 25.57 25.89 26.20 26.52
25.29 25.60 25.92 26.23 26.55
25.32 25.64 25.95 26.26 26.58
25.35 25.67 25.98 26.30 26.61
25.38 25.70 26.01 26.33 26.64
25.42 25.73 26.04 26.36 26.67
26.73 27.05 27.36 27.68 27.99
26.77 27.08 27.39 27.71 28.02
26.80 27.11 27.43 27.74 28.05
26.83 27.14 27.46 27.77 28.09
26.86 27.17 27.49 27.80 28.12
26.89 27.21 27.52 27.83 28.15
26.92 27.24 27.55 27.87 28.18
26.95 27.27 27.58 27.90 28.21
26.99 27.30 27.61 27.93 28.24
28.27 28.59 28.90 29.22 29.53
28.31 28.62 28.93 29.25 29.56
28.34 28.65 28.97 29.28 29.59
28.37 28.68 29.00 29.31 29.63
28.40 28.71 29.03 29.34 29.66
28.43 28.75 29.06 29.37 29.69
28.46 28.78 29.09 29.41 29.72
28.49 28.81 29.12 29.44 29.75
28.53 28.84 29.15 29.47 29.78
28.56 28.87 29.19 29.50 29.81
9.5 9.6 9.7 9.8 9.9
29.85 30.16 30.47 30.79 31.10
29.88 30.19 30.50 30.82 31.13
29.91 30.22 30.54 30.85 31.16
29.94 30.25 30.57 30.88 31.20
29.97 30.28 30.60 30.91 31.23
30.00 30.32 30.63 30.94 31.26
30.03 30.35 30.66 30.98 31.29
30.07 30.38 30.69 31.01 31.32
30.10 30.41 30.72 31.04 31.35
30.13 30.44 30.76 31.07 31.38
10.0
31.42
Average Difference 3
PETROLEUM
l-26
TABLEl.6-AREASOFCIRCLESBY
d
0
1
2
3
4
HUNDREDTHS
5
6
1.1 1.2 1.3 1.4
0.785 0.950 1.131 1.327 1.539
0.801 0.968 1.150 1.348 1.561
0.817 0.985 1.169 1.368 1.584
0.833 1.003 1.188 1.389 1.606
0.849 1.021 1.208 1.410 1.629
0.866 1.039 1.227 1.431 1.651
0.882 1.057 1.247 1.453 1.674
1.5 1.6 1.7 1.8 1.9
1.767 2.011 2.270 2.545 2.835
1.791 2.036 2.297 2.573 2.865
1.815 2.061 2.324 2.602 2.895
1.839 2.087 2.351 2.630 2.926
1.863 2.112 2.378 2.659 2.956
1.887 2.138 2.405 2.688 2.986
2.0 2.1 2.2 23 2.4
3.142 3.464 3.801 4.155 4.524
3.173 3.497 3.836 4.191 4.562
3.205 3.530 3.871 4.227 4.600
3.237 3.563 3.906 4.264 4.638
3.269 3.597 3.941 4.301 4.676
2.5 26 2.7 2.8 2.9
4.909 5.309 5.726 6.158 6.605
4.948 5.350 5.768 6.202 6.651
4.988 5.391 5.811 6.246 6.697
5.027 5.433 5.853 6.290 6.743
3.0 3.1 3.2 3.3 3.4
7.069 7.548 8.042 8.553 9.079
7.116 7.596 8.093 8.605 9.133
7.163 7.645 8.143 8.657 9.188
3.5
9.621
9.676
9.731
1.0
ENGINEERINGHANDBOOK
-
7
-
8
9
Average Difference
0.899 1.075 1.267 1.474 1.697
0.916 1.094 1.287 1.496 1.720
0.933 1.112 1.307 1.517 1.744
16 18 20 21 23
1.911 2.164 2.433 2.717 3.017
1.936 2.190 2.461 2.746 3.048
1.961 2.217 2.488 2.776 3.079
1.986 2.243 2.516 2.808 3.110
24 26 27 29 31
3.301 3.631 3.976 4.337 4.714
3.333 3.664 4.011 4.374 4.753
3.365 3.698 4.047 4.412 4.792
3.398 3.733 4.083 4.449 4.831
3.431 3.767 4.119 4.486 4.870
32 34 35 37 38
5.067 5.474 5.896 6.335 6.789
5.107 5.515 5.940 6.379 6.835
5.147 5.557 5.983 6.424 6.881
5.187 5.599 6.026 6.469 6.928
5.228 5.641 6.070 6.514 6.975
5.269 5.683 6.114 6.560 7.022
40 42 43 45 46
7.211 7.694 8.194 8.709 9.240
7.258 7.744 8.245 8.762 9.294
7.306 7.793 8.298 8.814 9.348
7.354 7.843 8.347 8.867 9.402
7.402 7.892 8.398 8.920 9.457
7.451 7.942 8.450 8.973 9.511
7.499 7.992 8.501 9.026 9.566
48 49 51 53 54
9.787
9.842
9.898
9.954
10.07 10.64 11.22 11.82 12.44
10.12 10.69 11.28 11.88 12.50
3.6 3.7 3.8 3.9
10.18 10.75 11.34 11.95
10.24 10.81 11.40 12.01
10.29 10.87 11.46 12.07
10.35 10.93 11.52 12.13
10.41 10.99 11.58 12.19
10.46 11.04 11.64 12.25
10.52 11.10 11.70 12.32
10.010 10.01 10.58 11.16 11.76 12.38
4.0 4.1 4.2 4.3 4.4
12.57 13.20 13.85 14.52 15.21
12.63 13.27 13.92 14.59 15.27
12.69 13.33 13.99 14.66 15.34
12.76 13.40 14.05 14.73 15.41
12.82 13.46 14.12 14.79 15.48
12.88 13.53 14.19 14.86 15.55
12.95 13.59 14.25 14.93 15.62
13.01 13.66 14.32 15.00 15.89
13.07 13.72 14.39 15.07 15.76
13.14 1379 14.45 15.14 15.83
4.5 4.6 4.7 4.8 4.9
15.90 16.62 17.35 18.10 18.86
15.98 16.69 17.42 18.17 18.93
16.05 16.76 17.50 18.25 19.01
16.12 16.84 17.57 18.32 19.09
16.19 16.91 17.65 18.40 19.17
16.26 16.98 17.72 18.47 19.24
16.33 17.06 17.80 18.55 19.32
16.40 17.13 17.87 18.63 19.40
16.47 17.20 17.95 18.70 19.48
16.55 17.28 18.02 18.78 19.56
5.0 5.1 5.2 5.3 5.4
19.63 20.43 21.24 22.06 22.90
19.71 20.51 21.32 22.15 22.99
19.79 20.59 21.40 22.23 23.07
19.87 20.67 21.48 22.31 23.16
19.95 20.75 21.57 22.40 23.24
20.03 20.83 21.65 22.48 23.33
20.11 20.91 21.73 22.56 23.41
20.19 20.99 21.81 22.65 23.50
20.27 21.07 21.90 22.73 23.59
20.35 21.16 21.98 22.82 23.67
56 :
7
8
9
Explanation of Table of Areas of Circles Moving the decimal pointone place inColumn d (diameter)ISequivalentto moving ittwo places in the body of the table. For example, area of circle=R/~XC? =0,785398x(d'). Conversely, diameter of circle=&x &=1.128379x 6.
MATHEMATICAL
TABLES
& UNITS
8 SYSTEMS
TABLE
d
0
OF WEIGHTS
1.8-AREAS
1
2
3
& MEASURES
l-27
OF CIRCLES BY HUNDREDTHS (continued)
5
6
7
8
9
24.19 25.07 28.88 27.81
24.28 25.16 26.06 26.97 27.90
24.37 25.25 26.15 27.06 27.99
24.45 25.34 26.24 27.15 28.09
24.54 25.43 26.33 27.25 28.18
9
26.69 27.62
24.11 24.98 25.88 26.79 27.71 28.65 29.61 30.58 31.57 32.57
28.75 29.71 30.68 31.67 32.67
28.84 29.80 30.78 31.77 32.78
28.94 29.90 30.88 31.07 32.88
29.03 30.00 30.97 31.97 32.98
29.13 30.09 31.07 32.07 33.08
10
5.5 5.6 5.7 5.8 5.9
23.76 24.63 25.52 26.42 27.34
23.84 24.72 25.61 26.51 27.43
23.93 24.81 25.70 26.60 27.53
6.0 6.1 6.2 6.3 6.4
28.27 29.22 30.19 31.17 32.17
28.37 29.32 30.29 31.27 32.27
28.46 29.42 31.37 32.37
28.56 29.51 30.48 31.47 32.47
6.5 6.6 8.7 6.8 6.9
33.18 34.21 35.26 36.32 37.39
33.29 34.32 35.36 36.42 37.50
33.39 34.42 35.47 36.53 37.61
33.49 34.52 35.57 36.64 37.72
33.59 34.63 35.68 36.75 37.83
33.70 34.73 35.78 36.85 37.94
33.80 34.84 35.89 36.96 38.05
33.90 34.94 36.00 37.07 38.16
34.00 35.05 36.10 37.18 38.26
34.11 34.15 36.21 37.28 38.37
7.0 7.1 7.2 7.3 7.4
38.48 39.59 40.72 41.85 43.01
38.59 39.70 40.83 41.97 43.12
38.70 39.82 40.94 42.08 43.24
38.82 39.93 41.06 42.20 43.36
38.93 40.04 41.17 42.31 43.47
39.04 40.15 41.28 42.43 43.59
39.15 40.26 41.40 42.54 43.71
39.26 40.38 41.51 42.66 43.83
39.37 40.49 41.62 42.78 43.94
39.48 40.60 41.74 42.89 44.06
7.5 7.6 7.7 7.8 7.9
44.18 45.36 46.57 47.78 49.02
44.30 45.48 46.69 47.91 49.14
44.41 45.60 46.81 48.03 49.27
44.53 45.72 46.93 48.15 49.39
44.65 45.84 47.05 48.27 49.51
44.77 45.96 47.17 48.40 49.64
44.89 46.08 47.29 48.52 49.76
45.01 46.20 47.42 48.65 49.89
45.13 46.32 47.54 48.77 50.01
45.25 46.45 47.66 48.89 50.14
8.0 8.1 8.2 8.3 8.4
50.27 51.53 52.81 54.11 55.42
50.39 51.66 52.94 54.24 55.55
50.52 51.78 53.07 54.37 55.68
50.64 51.91 53.20 54.50 55.81
50.77 52.04 53.33 54.63 55.95
50.90 52.17 53.46 54.76 56.08
51.02 52.30 53.59 54.89 56.21
51.15 52.42 53.72 55.02 56.35
51.28 52.55 53.85 55.15 56.48
51.40 52.68 53.98 55.29 56.61
8.5 8.6 8.7 8.8 8.9
56.75 58.09 59.45 60.82 62.21
56.88 58.22 59.58 60.96 62.35
57.01 58.36 59.72 61.10 62.49
57.15 58.49 59.86 61.24 62.63
57.28 58.63 59.99 61.38 62.77
57.41 58.77 60.13 61.51 82.91
57.55 58.90 60.27 61.65 63.05
57.68 59.04 60.41 61.79 63.19
57.82 59.17 60.55 61.93 63.33
57.95 59.31 60.68 62.07 63.48
9.0 9.1 9.2 9.3 9.4
63.62 65.04 66.48 67.93 69.40
63.76 65.18 68.62 68.08 69.55
63.90 65.33 66.77 68.22 69.69
64.04 65.47 66.91 68.37 69.84
64.18 65.61 67.06 68.51 69.99
64.33 65.76 67.20 68.66 70.14
64.47 65.90 67.35 68.81 70.29
64.61 66.04 67.49 88.96 70.44
64.75 66.19 67.64 69.10 70.58
64.90 66.33 67.78 69.25 70.73
9.5 9.6 9.7 9.8 9.9
70.88 72.38
71.03 72.53 74.05 75.58 77.13
71.33 72.84 74.36 75.89 77.44
71.48 72.99 74.51 76.05 77.60
71.63 73.14 74.66 76.20 77.76
71.78 73.29 74.82 76.36 77.91
71.93 73.44 74.97 76.51 78.07
72.08 73.59 75.12 76.67 78.23
72.23 73.75 75.28 76.82 78.38
73.90 75.43
76.98
30.39
71.18 72.68 74.20 75.74
77.29
Average Difference
4
24.02 24.89
25.79
25.97
11
12
13
14
15
16
l-28
PETROLEUM
TABLE I.S-CIRCUMFERENCES
Circumference 0.04909 0.09817 0.1473 0.1963 0.2454 0.2945 0.3436 0.3927 0.4418 0.4909 0.5400 0.5890 0.6381 0.6872 0.7363 0.7854 0.8345 0.8836 0.9327 0.9817 1.031 1.080 1.129 1.178 1.227 1.276 1.325 1.374 1.424 1.473 1.522 1.571 1.620 1.669 1.718 1.767 1.816 1.865 1.914 1.963 2.013 2.062 2.111 2.160 2.209 2.258 2.307 2.356 2.405 2.454 2.503 2.553 2.602 2.651 2.700
Area
0.00019 0.00077
0.00173 0.00307 0.00479 0.00690 0.00940 0.01227 0.01553 0.01917 0.02320 0.02761 0.03241 0.03758 0.04314 0.04909 0.05542 0.06213 0.06922 0.07670 0.08456 0.09281 0.1014 0.1104 0.1198 0.1296 0.1398 0.1503 0.1613 0.1726 0.1843 0.1963 0.2088 0.2217 0.2349 0.2485 0.2625 0.2769 0.2916 0.3068 0.3223 0.3382 0.3545 0.3712 0.3883 0.4057 0.4236 0.4418 0.4604 0.4794 0.4987 0.5185 0.5386 0.5591 0.5800
ENGINEERINGHANDBOOK
AND AREAS OF CIRCLES BY EIGHTHS
Circumference 2.749 2.798 2.847 2.896 2.945 2.994 3.043 3.093 3.142 3.338 3.534 3.731 3.927 4.123 4.320 4.516 4.712 4.909 5.105 5.301 5.498 5.694 5.890 6.087 6.283 6.480 6.676 6.872 7.069 7.265 7.461 7.658 7.854 8.050 8.247 8.443 6.639 8.836 9.032 9.228 9.425 9.621 9.817 10.01 10.21 10.41 10.60 10.80 11.00 11.19 11.39 11.58 il.78 11.98 12.17 12.37
Area
Circumference
Area
0.6013 0.6230 0.6450 0.6675 0.8903 0.7135 0.7371 0.7610 0.7854 0.8866 0.9940 1.108 1.227 1.353 1.485 1.623 1.767 1.917 2.074 2.237 2.405 2.580 2.761 2.948 3.142 3.341 3.547 3.758 3.976 4.200 4.430 4.666 4.909 5.157 5.412 5.673 5.940 6.213 6.492 6.777 7.069 7.366 7.870 7.980 8.296 8.618 8.946 9.281 9.621 9.968 10.32 10.68 11.04 11.42 11.79 12.18
12.57 12.76 12.96 13.16 13.35 13.55 13.74 13.94 14.14 14.33 14.53 14.73 14.92 15.12 15.32 15.51 15.71 15.90 16.10 16.30 16.49 16.69 16.89 17.08 17.28 17.48 17.67 17.87 18.06 18.26 18.46 18.65 18.85 19.24 19.63 20.03 20.42 20.81 21.21 21.60 21.99 22.38 22.78 23.17 23.56 23.95 24.35 24.74 25.13 25.53 25.92 26.31 26.70 27.10 27.49 27.88
12.57 12.96 13.36 13.77 14.19 14.61 15.03 15.47 15.90 16.35 16.80 17.26 17.72 18.19 18.67 19.15 19.63 20.13 20.63 21.14 21.65 22.17 22.69 23.22 23.76 24.30 24.85 25.41 25.97 26.53 27.11 27.69 28.27 29.46 30.68 31.92 33.18 34.47 35.78 37.12 38.48 39.87 41.28 42.72 44.18 45.66 47.17 48.71 50.27 51.85 53.46 55.09 56.75 58.43 60.13 61.86
MATHEMATlCALTABLES&
UNITS&
SYSTEMS
TABLE1.9-CIRCUMFERENCES
Circumference 28.27 28.67 29.06 29.45 29.85 30.24 30.63 31.02 31.42 31.81 32.20 32.59 32.99 33.38 33.77 34.16 34.56 34.95 35.34 35.74 36.13 36.52 36.91 37.31 37.70 38.09 38.48 38.88 39.27 39.66 40.06 40.45 40.84 41.23 41.63 42.02 42.41 42.80 43.20 43.59 43.98 44.37 44.77 45.16 45.55 45.95 46.34 46.73 47.12 47.52 47.91 48.30 48.69 49.09 49.48 49.87
OF WEIGHTS
AND
& MEASURES
AREAS
1-29
OFCIRCLES
BY ElGHTHS(continued)
Circumference 63.62 65.40 67.20 69.03 70.88 72.76 74.66 76.59 78.54 80.52 82.52 84.54 86.59 88.66 90.76 92.89 95.03 97.21 99.40 101.6 103.9 106.1 108.4 110.8 113.1 115.5 117.9 120.3 122.7 125.2 127.7 130.2 132.7 135.3 137.9 140.5 143.1 145.8 148.5 151.2 153.9 156.7 159.5 162.3 165.1 168.0 170.9 173.8 176.7 179.7 182.7 185.7 188.7 191.7 194.8 197.9
50.27 50.66 51.05 51.44 51.84 52.23 52.62 53.01 53.41 53.80 54.19 54.59 54.98 55.37 55.76 56.16 56.55 56.94 57.33 57.73 58.12 58.51 58.90 59.30 59.69 60.08 60.48 60.87 61.26 61.65 62.05 62.44 62.83 63.22 63.62 64.01 64.40 64.80 65.19 65.58 65.97 66.37 66.76 67.15 67.54 67.94 68.33 68.72 69.12 69.51 69.90 70.29 70.69 71.08 71.47 71.86
Circumference 201.1 204.2 207.4 210.6 213.8 217.1 220.4 223.7 227.0 230.3 233.7 237.1 240.5 244.0 247.4 250.9 254.5 258.0 261.6 285.2 268.8 272.4 276.1 279.8 283.5 287.3 291.0 294.8 298.6 302.5 306.4 310.2 314.2 318.1 322.1 326.1 330.1 334.1 338.2 342.2 346.4 350.5 354.7 358.8 363.1 367.3 371.5 375.8 380.1 384.5 388.8 393.2 397.6 402.0 406.5 411.0
23 '/a '/4 '/4 ‘12
78 %l 24
% '/4 '12 VI
25 '/4 '12 %l 26 '12 ‘/2 3/i
27 'A ‘12 3/k
28
29
'h '/2 v4 '/a '12 Y4
30 l/4 '/2 3/b 31 '/4 'I2 v4 32 '/4 ‘12
%I 33 '/4 '12 =/4 34 'I4 % v4 35 '/4 '12
3/i
72.26 72.65 73.04 73.43 7383 74.22 74.61 75.01 75 40 76.18 7697 77.75 78.54 79.33 80.11 80.90 81.68 82.47 83.25 84.04 84.82 85.61 86.39 87.18 87.96 88.75 89.54 90.32 91.11 91.89 92.68 93.46 94.25 95.03 95.82 96.60 97.39 98.17 98.96 99.75 100.5 101.3 102.1 102.9 103.7 104.5 105.2 106.0 106.8 107.6 108.4 109.2 110.0 110.7 111.5 112.3
Area 415.5 420.0 424.6 429.1 433.7 438.4 443.0 447.7 452.4 461.9 471.4 481.1 490.9 500.7 510.7 520.8 530.9 541.2 551.5 562.0 572.6 583.2 594.0 604.8 615.8 626.8 637.9 649.2 660.5 672.0 683.5 695.1 706.9 718.7 730.6 742.6 754.8 767.0 779.3 791.7 804.2 816.9 829.6 842.4 855.3 868.3 881.4 894.6 907.9 921.3 934.8 948.4 962.1 975.9 989.8 1003.8
PETROLEUM
l-30
TABLE l.lO-AREAS
OF CIRCLES-DIAMETERS
ENGINEERING
HANDBOOK
IN FEET AND INCHES, AREAS IN SQUARE FEET Inches
Feet 0
8
0 0.0000
1
2
3
4
5
6
7
0.0055
0.0216
0.0491
0.0673
0.1364
0.1963
0.2673
0.3491
0.4416
0.5454
06600
07854 3142
09216 3.409
1.069 3687
1.227 3976
1.396 4276
1.576 4587
1.767 4909
1.969 5.241
2.182 5.585
2405 5.940
2.640 6.305
2885 6681
7.069 1257
7 467 13.10
7676 13.64
8.296 14.19
8.727 14.75
9.168 1532
19.63
20.29 29.07
20.97
21.65
2234
2304
2627
29 67
30.66
31 50
32 34 43.20
44.18
9.621 15.90 23.76 33.18
3048 50 27
39.41 51 32
40.34 5236
41.26 5346
42 24 54 54
55.64
56.75
6362
6460
67.20
6842
69.64
70.88
78 54 95.03 113.1
7985
66 00 81.16
82.52 99.40
85.22 1024 121 1
8659 103.9 122.7
1327 153.9
96.48 1147
97 93 1163
1179
83.66 100.9 119.5
134.4
1362
1379
139.6
1414
143.1
1556
1576
159.5
161.4
163.2
165.1
10
9
10.08 16.50
10.56 17.10
11.04 17.72
11.54 18.35
1205 1899
24.48
25.22 3491
25.97
26.73 36.67
2749 3757
34.04 45.17
46.16
35.78 47.17
48.19
49 22
57.86 72.13
58.99 73.39
60.13
61.28
74.66
75.94
6244 77 24
87.97
89.36
90.76
92.18
108.4 127.7
110.0 129.4
9360 111 5 131 0
144.9
106.9 1260 146.7
148.5
167.0
168.9
170.9
150.3 172.8
1521 1748
105.4 124.4
From Inches and Fractions of an Inch to Decimals of a Foot” Inches
1
2
3
5
6
7
6
9
10
Feet
0.0833
0.1667
0.2500
03333
0.4167
0.5000
0.5833
0.6667
0.7500
0.8333
Inches Feet
'/a 0.0104
% 0.0208
% 0.0313
'12 00417
% 00521
v4 0.0625
% 0 0729
4
11
11 09167
MATHEMATICALTABLES&
TABLE 1 .l l-SEGMENTS
hlc 0.00 0.01 0.02
d/c 25.010 12.520
0.04
8.363 6.290
0.05 0.06
5.050 4.227
0.07
3.641 3.205
0.03
0.08 0.09
2.868
0.10
2.600
0.11 0.12
2.383
0.13
2.203 2.053
0.14
1.926
0.15
1.617
0.16 0.17 0.18 0.19
1.723 1.641
0.20 0.21 0.22
1.450 1.400 1.356
0.23 0.24
1.317 1.282
0.25 0.26
1.250 1.222
0.27 0.28 0.29 0.30 0.31
1.569 1.506
1.196 1.173 1152 1.133 1.116 1.101
1-31
UNlTS&SYSTEMSOFWElGHTS&MEASURES
Difference
Arc/c
12,490 4.157' 2,073' 1,240'
19 17 15 13
0.32 0.33
1.088
0.34
1.075
0.35 0.36 0.37
1.064 1.054 1.046
0.38 0.39
1.038 1.031
7 6
0.40 0.41
1.025 1.020
5
0.42
1.015
0.43 0.44
1.011 1.008
0.45 0.46
1.006 1.003
0.47 0.48
1.002 1.001
0.49
1.000
0.50
1.000
13 11 10 8 8
5 4 3 2 3 1 1 1 0
13.73
1.032 1.038 1.044 1.051
109'
26 23 21
0.6671 0.6675
1.026
180' 150" 127"
28
1.002
1.021
217'
32
0.00 4.58 9.16
1.013 1.017
268'
1.059 1.067 1.075 1.084 1.094 1.103 1.114 1.124 1.136 1.147 1.159 1.171 1.184 1.197 1.211 1.225 1.239 1.254 1.269
3 3 4 4 5 6 6 6 7 8 8 8 9 10 9 11 10 12 11 12 12 13 13 14 14 14 15 15
1.284
15 16
1.300 1.316 1.332
16 16
1.349 1.366 1.383 1.401 1.419 1.437 1.455 1.474 1.493 1.512 1.531 1.551 1.571
Explanation of Table of Segments
Difference
0.6667 0.6667 0.6669
1.007 1.010
436. 337'
50 44 39 35
Arealhxc
17 17 17 18 18 18 18 19 19 19 19 20 20
0.6680 0.6686 0.6693 0.6701 0.6710 0.6720 0.6731 0.6743 0.6756 0.6770 0.6785 0.6801 0.6818 0.6836 0.6855 0.6875 0.6896 0.6918 0.6941 0.6965 0.6989 0.7014 0.7041 0.7088 0.7096 0.7125 0.7154 0.7185 0.7216 0.7248 0.7280 0.7314 0.7348 0.7383 0.7419 0.7455 0.7492 0.7530 0.7568 0.7607 0.7647 0.7687 0.7728 0.7769 0.7811 0.7854
18.30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 24 25 27 27 28 29 29 31 31
22.84 27.37 31.88 36.36 40.82 45.24 49.63 53.98 58.30 62.57 66.80 70.98 75.11 79.20 83.23 87.21 91.13 95.00 98.81 102.56 106.26 109.90 113.48 117.00 120.45 123.86 127.20 130.48 133.70
32 32
136.86
34 34 35
143.02 146.01
36 36 37 38 38 39 40 40 41 41 42 43
h/c
Central Angle, CY (degrees)
1.000 1.000 1.001 1.004
823' 586"
94" 82' 72' 63' 56
Difference
OF CIRCLES, GIVEN
139.97
148.94 151.82 154.64 157.41 160.12 162.78 165.39 167.95 170.46 172.91 175.32 177.69 180.00
Difference 458 458 457 457 454 453 451 448 446 442 439 435 432 427 423 418 413 409 403 399 392 387 381 375 370 364 358 352 345 341 334 328 322 316 311 305 299 293 288 282 277 271 266 261 256 251 245 241 237 231
hld
Difference
0.0000 0.0004 0.0016
4 12
0.0036 0.0064 0.0099 0.0142 0.0192 0.0250 0.0314 0.0385 0.0462 0.0545 0.0633 0.0727 0.0826 0.0929 0.1036 0.1147 0.1263 0.1379 0.1499 0.1622 0.1746 0.1873 0.2000 0.2128 0.2258 0.2387 0.2517 0.2647 0.2777 0.2906 0.3034 0.3162 0.3289 0.3414 0.3538 0.3661 0.3783 0.3902 0.4021 0.4137 0.4252 0.4364 0.4475 0.4584 0.4691 0.4796 0.4899 0.5000
20 28 35 43 50 58 64 71 77 83 88 94 99 103 107 111 116 116 120 123 124 127 127 128 130 129 130 130 130 129 128 128 127 125 124 123 122 119 119 116 115 112 111 109 107 105 103 101
of Circles,Given h/c
Given: h= height of segment and c=chord, to findthe drameter,d, of the circle, the length of the arc, or the area of the segment, form the ratioh/c, and findfrom the tablethe value of d/c, arc/c,or arealhc;then, by a simple multiplication, d= cx (d/c), arc=c x (arc/c), and area= h x c x (arealhc). The table also gives the angle subtended at the center,and the ratioof h to d.
PETROLEUM
1-32
TABLE 1.12-SEGMENTS
hid
Arc/d
0.00 0.000 0.01
0.2003
0.02
0.2638
0.03
0.3482
0.04
0.4027
0.05
0.4510
0.06
0.4949
0.07
0.5355
0.08
0.5735
0.09
0.6094
0.10
0.6435
0.11
0.6761
0.12
0.7075
0.13
0.7377
0.14
0.7670
0.15
0.7954
016
0.8230
0.17
0.8500
0.18
0.8763
0.19
0.9021
0.20
0.9273
0.21
0.9521
0.22
0.9764
0.23
1.0004
024
1.0239
0.25
1.0472
0.26
1.0701
0.27
1.0928
0.26
1.1152
0.29
1.1374
0.30
1.1593
0.31
1.1810
0.32
1.2025
0.33
1.2239
0.34
1.2451
0.35
1.2661
036
12870
0.37
1.3078
038
1.3284
0.39
1.3490
0.40
1.3694
0.41
13898
0.42
14101
043
1.4303
044
1.4505
0.45
14706
046
1.4907
047
1.5106
0 48
1.5308
049
1.5508
0.50
Difference
Area/d'
0.0000
2003 835' 644' 545' 483' 439' 406' 380' 359' 341' 326' 314' 302' 293' 284'
24
0.0037
32
0.0069
36
0.0105
42
0.0147
45
0.0192
50
0.0242
52
0.0294
56
0.0350
59
0 0409
61
00470
64
00534
66
00600
68
00666
71
0 0739
276
72
00811
270
74
00885
263
76
00961
256
76
01039
252
79
01118
248
81
0 1199
243
82
01281
240
84
01365
235
64
0 1449
233
86
0 1535
229
88
01623
277
88
01711
224
89
01800
222
90
0.1890
219
92
0.1982
217
92
0.2074
215
93
02167
214
93
0.2260
212
95
0.2355
210
95
02450
209
96
0.2546
208
96
0.2642
206
97
0 2739
206
97
02836
204
98
0 2934
204
98
03032
203
98
03130
202
99
0 3229
202
0 3328
201
99 100
0.3428
201
03527
201
100
03727
200
0.3627
200
99 100
03627
200
100 100
0.3927
15708
h=helght
13
0.0013
Explanatcon of Table of Segments Gwen:
D!fference
of segment
32.52 39.90 46.15 51.68 56.72 61.37 65.72 69.83 7374 77 48 81.07 8454 87 89 91.15 94.31 9740 10042 103.37 106.26 109.10 111 89 114.63 117.34 120.00 122.63 125.23 127.79 130.33 132.84 135.33 13780 140.25 14267 14506 147.46 14986 15223 15458 15693 15926 161 59 16390 16622 16652 17082 17312 17541 17771 18000
2296 956’ 738' 625' 553' 504' 465' 435' 411' 391' 374, 359 * 347' 335' 326' 316 309 302 295 289 284 279 274 271 266 263 260 256 254 251 249 247 245 242 241 240 238 237 235 235 233 233 231 232 230 230 230 229 230 229
Arc c/d 0.1990 0.2800 0.3412 0.3919 0.4359 0.4750 0.5103 05426 0.5724 0 6000 0.6258 0.6499 0.6726 0.6940 ,0.7141 0.7332 0.7513 07684 0.7846 0.8000 0.8146 0.8285 0.8417 0.8542 0.8660 0.8773 0.8879 0 8980 0.9075 0.9165 0.9250 0.9330 0.9404 0.9474 0.9539 0 9600 0 9656 0.9708 0.9755 0.9798 0.9837 0.9871 0 9902 0 9928 0.9950 0 9968 0.9982 0 9992 0 9998
Difference 1990 810' 612' 507' 440' 391. 353' 323' 298 * 276' 258' 241' 227' 214' 201' 191' 181' 171' 162 154 146 139 132 125 118 113 106 101 95 90 85 80 74 70 65 61 58 52 47 43 39 34 31 26 22 18 14 10 6 2
10000
Circumference
0 0000 0.0638 0.0903 0.1108 0.1282 0.1436 0.1575 0.1705 0.1826 0.1940 0.2048 0.2152 0.2252 0.2348 0.2441 0.2532 0.2820 0.2706 0 2789 0.2871 0.2952 0.3031 0.3108 0.3184 0.3259 0.3333 0.3406 0.3478 0.3550 0.3820 0.3690 0.3759 0.3828 0.3898 0.3963 0.4030 0.4097 0.4163 0.4229 0.4294 0.4359 0.4424 0 4489 0.4553 0.4617 0.4681 04745 0.4809 04873 0.4936
Area Drfference
Circle
0.0000
638‘
0.0017
265'
0.0046
205'
0.0087
174'
0.0134
154'
0.0187
139.
0.0245
130'
0.0308
121
0.0375
114
0 0446
108
0.0520
104
0.0598
100
0.0680
96
0.0764
93
0.0851
91
0.0941
88
0.1033
86
0.1127
83
0.1224
82
0 1323
81
0.1424
79
0.1527
77
0.1631
76
0.1738
75
01846
74
01955
73
02066
72
02178
72
0 2292
70
02407
70
0.2523
69
0.2640
69
0.2759
68
0.2878
67
0 2998
67
0.3119
67
03241
66
0.3364
66
0.3487
65
0.3611
65
0.3735
65
0.3860
65
0.3986
64
0.4112
64
0.4236
64
0.4364
64
04491
64
0.4618
64
04745
63
0.4873
64
0.5000
Difference 17 31 39 47 53 58 63 67 71 74 78 82 84 87 90 92 94 97 99 101 103 104 107 108 109 111 112 114 115 116 117 119 119 120 121 122 123 123 124 124 125 126 126 126 126 127 127 127 128 127
0.5000
of Circles. Given h/d
and d= dtameter of circle,to find the chord, the length of arc, or the area of the segment,
and find from the table the value of (c/d), area=d'x (area/d') The table also gives the angle subtended the area 01 the segment
0.00 22.96
HANDBOOK
OF CIRCLES, GIVEN h/d
Cf?ntL4 Angle, (v (degrees) Difference
ENGINEERING
(arc/d), or (area/d*), then by a simple multipllcatlon.c=dx(cld), at the center. the ratloof the arc of the segment
to the area of the whole cvcle
form the ratloh/d
arc=dx(arc/d),
and
to the whole circumference. and the ratloof
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
TABLE 1.13~SEGMENTS
d3
0.00 0.01 0.02
0.0000
0.03
0.0014
0.04
0.0024
0.05
0.0038
0.06 0.07
0.0054
0.0002 0.0006
Difference
0.11
0.0147 0.0176
0.12
0.0208
0.13 0.14
0.0242 0.0279
34 37 39
0.15 0.16
0.0318 0.0359
41
0.17 0.18
0.0596 0.0649 0.0704
0.23 0.24
0.0760
0.25 0.26 0.27
0.0818 0.0878 0.0939
0.28 0.29
0.1002
0.30
0.1131
0.31 0.32
0.1198
0.1066
0.1265 0.1334
0.33 0.34
0.1404
0.35
0.1475
0.36 0.37 0.38
0.1547 0.1620 0.1694
0.39
0.1768
0.40
0.1843
0.41 0.42
0.1919
0.43
0.1995 0.2072
0.44
0.2149
0.45 0.46 0.47
0.2227 0.2305 0.2383
0.48 0.49
0.2461 0.2539
0.50
0.2618
‘Volume
segment=
0.0047 0.0073 0.0104
16 19 22
0.10
0.21 0.22
0.0026
14
0.0120
0.0545
0.0003 0.0012
8 10
0.09
0.19
0.0000
2
0.08
0.20
Volume sphere
4
0.0073 0.0095
0.0403 0.0448 0.0495
OF SPHERES Volume segment
Volume segment h/d
l-33
& MEASURES
0.0140 0.0182
25 27
0.0228 0.0260 0.0336 0.0397
29 32
44 45 47
0.1452 0.1562 0.1676 0.1793
63
0.1913 0.2035
64 65
0.2160 0.2287 0.2417
67 67 69 70
0.2548 0.2682
71
0.2817
72
0.2955
73 74 74
0.3094 0.3235 0.3377
75
0.3520
76
0.3665 0.3810
76 77
0.3957
77
0.4104
78
0.4252 0.4401 0.4551
78 78 78 78
0.4700 0.4850
79
46 52 56 61
79
0.1138 0.1239 0.1344
60 61
31 36 42
0.0607 0.0686
0.1040
56 58
26
66 70 74
0.0946
51 53 55
3 9 14 21
0.0463 0.0533
0.0769 0.0855
50
Difference
0.5000
83 86 91 94 98 101 105 108 110 114 117 120 122 125 127 130 131 134 135 138 139 141 142 143 145 145 147 147 148 149 150 149 150 150
1/6rh2(3c-2h)
Explanation of Table of Segments
of Spheres
Given: h = heightof segment and d = diameter of sphere,to findthe volume of the segment, form the ratioh/d and find from the table the value of (volume/d3): then. by a simple multiplication, volume segment= d3 x (volume/d3). The tablealso gives the ratioof the volume of the segment to the entire volume of the sphere. Note that the area of zone= ?TX hx d.
1-34
PETROLEUM
TABLE
d
0
1
2
1.14-VOLUMES
3
OF SPHERES
4
5
HANDBOOK
BY HUNDREDTHS
6
0.6969 0.9048
0.5395 0.7161 0.9276
0.5556 0.7356 0.9508
0.5722 0.7555 0.9743
0.5890 0.7757 0.9983
1.150 1.437
1.177 1.468
1.204 1.499
1.232 1.531
1.5 1.6 1.7 1.8 1.9
1.767 2.145 2.572 3.054 3.591
1.803 2.185 2.618 3.105 3.648
1.839 2.226 2.664 3.157 3.706
2.0 2.1 2.2 2.3 2.4
4.189 4.849 5.575 6.371 7.238
4.252 4.919 5.652 6.454 7.329
2.5 2.6 2.6 2.7 2.8 2.9
8.181 9.203
8.280 9.309
10.31 11.49 12.77
10.42 11.62 12.90
10.54 11.74 13.04
10.65 11.87 13.17
10.77 11.99 13.31
10.89 12.12 13.44
11.01 12.25 13.58
3.0 3.1 3.2 3.3 3.4
14.14 15.60 17.16 18.82 20.58
14.28 15.75 17.32 18.99 20.76
14.42 15.90 17.48 19.16 20.94
14.57 16.06 17.64 19.33 21.13
14.71 16.21 17.81 19.51 21.31
14.86 16.37 17.97 19.68 21.50
3.5 3.6 3.7 3.8 3.9
22.45 24.43 26.52 28.73 31.06
22.64 24.63 26.74 28.96 31.30
22.84 24.84 26.95 29.19 31.54
23.03 25.04 27.17 29.42 31.78
23.23 25.25 27.39 29.65 32.02
4.0 4.1 4.2 4.3 4.4
33.51 36.09 38.79 41.63 44.60
33.76 36.35 39.07 41.92 44.91
34.02 36.62 39.35 42.21 45.21
34.27 36.88 39.63 42.51 45.52
4.5 4.6 4.7 4.8 4.9
47.71 50.97 54.36 57.91 61.60
48.03 51.30 54.71 58.27 61.98
48.35 51.63 55.06 58.63 62.36
5.0 5.1 5.2 5.3 5.4
65.45 69.46 73.62 77.95 82.45
65.64 69.87 74.05 78.39 82.91
66.24 70.28 74.47 78.84 83.37
-0.5236 1.0 1.1 1.2 1.2 1.3 1.4
ENGINEERING
7
8
9
Difference
0.6236 0.8173
0.6414 0.8386
0.6596 0.8603
0.6781 0.8823
1.260 1.563
0.6061 0.7963 1.0227 1.023 1.288 1.596
1.047 1.317 1.630
1.073 1.346 1.663
1.098 1.376 1.697
1.124 1.406 1.732
1.875 2.268 2.711 3.209 3.764
1.912 2.310 2.758 3.262 3.823
1.950 2.352 2.806 3.315 3.882
1.988 2.395 2.855 3.369 3.942
2.026 2.439 2.903 3.424 4.003
2.065 2.483 2.953 3.479 4.064
2.105 2.527 3.003 3.535 4.126
38 43 48
4.316 4.989 5.729 6.538 7.421
4.380 5.060 5.806 6.623 7.513
4.445 5.131 5.885 6.709 7.606
4.511 5.204 5.964 6.795 7.700
4.577 5.277 6.044 6.882 7.795
4.644 5.350 6.125 6.970 7.890
4.712 5.425 6.206 7.059 7.986
4.780 5.500 6.288 7.148 8.083
66 73 80 87 94
8.379 9.417
8.478 9.525
8.580 9.634
8.682 9.744
8.785 9.855
8.888 9.966
9.097
11.13 12.38 13.72
8.992 10.079 10.08 il.25 12.51 13.86
10.19 11.37 12.64 14.00
102 110 11 12 13 14
15.00 16.52 18.14 19.86 21.69
15.15 16.68 18.31 20.04 21.88
15.30 16.84 18.48 20.22 22.07
15.45 17.00 18.65 20.40 22.26
15 16 17 18 19
23.43 25.46 27.61 29.88 32.27
23.62 25.67 27.83 30.11 32.52
23.82 25.88 28.06 30.35 32.76
24.02 26.09 28.28 30.58 33.01
2423 26.31 2850 30.82 33.26
20 21 22 23 25
34.53 37.15 39.91 42.80 45.83
34.78 37.42 40.19 43.10 46.14
35.04 37.69 40.48 43.40 46.45
35.30 37.97 40.76 43.70 46.77
35.56 38.24 41.05 44.00 47.08
35.82 38.52 41.34 44.30 47.40
26 27 28 30 31
48.67 51.97 55.41 59.00 62.74
49.00 52.31 55.76 59.37 63.12
49.32 52.65 56.12 59.73 63.51
49.65 52.99 56.47 60.10 63.89
49.97 53.33 56.83 60.48 64.28
50.30 53.67 57.19 60.85 64.67
50.63 54.02 57.54 61.22 65.06
33 34 35 37 38
66.64 70.69 74.90 79.28 83.83
67.03 71.10 75.33 79.73 84.29
67.43 71.52 75.77 80.18 84.76
67.83 71.94 76.20 80.63 85.23
68.24 72.36 76.64 81.08 85.70
68.64 72.78 77.07 81.54 86.17
69.05 73.20 77.51 81.99 86.64
40 42 43 45 47
173 208 236 25 29 33
:;
Explanationof Table of Volumes of Spheres Moving the decimal point one place in Column d (diameter)is equivalentto moving itthree places in the body of the table. For example, volume of sphere= ~/6x (d3)=0.523599x(d3).
Conversely, d= ?/%x
$k%%=
1.240701 x %%r%e.
MATHEMATICALTABLES
& UNITS&
SYSTEMSOFWEIGHTS
TABLE1.14-VOLUMESOF
SPHERES
d -~ 5.5 5.6 5.7 5.7 5.8 5.9
102.2 107.5
102.7 108.1
103.2 108.6
103.8 109.2
104.3 109.7
6.0 6.1 6.2 6.3 6.4
113.1 118.8 124.8 130.9 137.3
113.7 119.4 125.4 131.5 137.9
114.2 120.0 126.0 132.2 138.5
114.8 120.6 126.6 132.8 139.2
6.5 6.6 8.7 6.8 6.9
143.8 150.5 157.5 164.6 172.0
144.5 151.2 158.2 165.4 172.8
145.1 151.9 158.9 166.1 173.5
7.0 7.1 7.2 7.3 7.4
179.6 187.4 195.4 203.7 212.2
180.4 188.2 196.2 204.5 213.0
7.5 7.6 7.7 7.8 7.9
220.9 229.8 239.0 248.5 258.2
8.0 8.1 8.2 8.3 8.4
1-35
& MEASURES
BY HUNDREDTHS(continued)
0
1
2
3
4
5
87.11 91.95 96.97
87.59 92.45 97.48
88.07 92.94 97.99
88.55 93.44 98.51
89.03 93.94 99.02
89.51 94.44 99.54
6
7
8
9
90.48 95.44
90.97 95.95
91.49 96.46
Difference 48 50 52 5 5 6
104.8 110.3
90.00 94.94 100.06 100.1 105.4 110.9
100.6 105.9 111.4
101.1 106.4 112.0
101.6 107.0 112.5
115.4 121.2 127.2 133.4 139.8
115.9 121.8 127.8 134.1 140.5
116.5 122.4 128.4 134.7 141.2
117.7 123.6 129.1 135.3 141.8
117.1 123.0 129.7 136.0 142.5
118.3 124.2 130.3 136.6 143.1
145.8 152.6 159.6 166.8 174.3
146.5 153.3 160.3 167.6 175.0
147.1 154.0 161.0 168.3 175.8
147.8 154.7 161.7 169.0 176.5
148.5 155.4 162.5 169.8 177.3
149.2 156.1 163.2 170.5 178.1
149.6 156.8 163.9 171.3 178.8
8
181.1 189.0 197.1 205.4 213.9
181.9 189.8 197.9 206.2 214.8
182.7 190.6 198.7 207.1 215.6
183.5 191.4 199.5 207.9 216.5
184.3 192.2 200.4 208.8 217.4
185.0 193.0 201.2 209.6 218.3
185.8 193.8 202.0 210.5 219.1
186.6 194.6 202.9 211.3 220.0
9
221.8 230.8 240.0 249.4 259.1
222.7 231.7 240.9 250.4 260.1
223.6 232.6 241.8 251.4 261.1
224.4 233.5 242.8 252.3 262.1
225.3 234.4 243.7 253.3 263.1
226.2 235.3 244.7 254.3 264.1
227.1 236.3 245.6 255.2 265.1
228.0 237.2 246.6 256.2 266.1
228.9 238.1 247.5 257.2 267.1
268.1 278.3 288.7 299.4 310.3
269.1 279.3 289.8 300.5 311.4
270.1 280.3 290.8 301.6 312.6
271.1 281.4 291.9 302.6 313.7
272.1 282.4 292.9 303.7 314.8
273.1 283.4 294.0 304.8 315.9
274.2 284.5 295.1 305.9 317.0
275.2 285.5 296.2 307.0 318.2
276.2 286.6 2972 308.1 319.3
277.2 287.6 298.3 309.2 320.4
8.5 8.6 8.7 8.6 8.9
321.6 333.0 344.8 356.8 369.1
322.7 334.2 346.0 358.0 370.4
323.8 335.4 347.2 359.3 371.6
325.0 336.5 348.4 360.5 372.9
326.1 337.7 349.6 361.7 374.1
327.3 338.9 350.8 362.9 375.4
328.4 340.1 352.0 364.2 376.6
329.6 341.2 353.2 365.4 377.9
330.7 342.4 354.4 366.6 379.2
331.9 343.6 355.6 367.9 380.4
9.0 9.1 9.2 9.3 9.4
381.7 394.6 407.7 421.2 434.9
383.0 395.9 409.1 422.5 436.3
384.3 397.2 410.4 423.9 437.7
385.5 398.5 411.7 425.2 439.1
386.8 399.8 413.1 426.6 440.5
388.1 401.1 414.4 428.0 441.9
389.4 402.4 415.7 429.4 443.3
390.7 403.7 417.1 430.7 444.7
392.0 405.1 418.4 432.1 446.1
393.3 406.4 419.8 433.5 447.5
9.5 9.6 9.7 9.8 9.9
448.9 463.2 477.9 492.8 508.0
450.3 464.7 479.4 494.3 509.6
451.8 466.1 480.8 495.8 511.1
453.2 467.6 482.3 497.3 512.7
454.6 469.1 483.8 498.9 514.2
456.0 470.5 485.3 500.4 515.8
457.5 472.0 486.8 501.9 517.3
458.9 473.5 488.3 503.4 518.9
460.4 474.9 489.8 505.0 520.5
461.8 476.4 491.3 506.5 522.0
10.0
523.6
6
7
10
11
12
13
14
15 16
PETROLEUM
l-36
TABLE
n
DI
3 4 5 6 7 a 9 10 12 15 16 20 24 32 48 64
1200 900 72O 600 510.43 450 400 36" 300 24' 220.50 la0 150 110.25 70.50 5O.625
1.15-REGULAR
ENGINEERING
HANDBOOK
POLYGONS
Area
Area
Area
R
R
L
L
r
r
L2
R2
r2
L
r
R
r
R
L
1.299 2.000 2.378 2.598 2.736 2.828 2 a93 2.939 3.000 3.051 3.062 3.090 3.106 3.121 3.133 3.137
5196 4.000 3633 3464 3.371 3314 3276 3249 3215 3 188 3 ia3 3.168 3160 3152 3146 3144
0.5774 0.7071 0.8507 1.000 1.152 1307 1.462 I.618 1.932 2.405 2.563 3196 3.831 5.101 7.645 10.19
2000 1.414 1.236 1.155 1.110 1.082 1.064 1.052 1.035 1.022 1.020 1.013 1.009 1.005 1.002 1.001
1.732 1.414 1.176 1.000 0.8678 0.7654 0.6840 0.61a0 0.5176 0.4158 0.3902 0.3129 0.2611 0.1960 0.1308 0.0981
3.464 2.000 1 453 1.155 0.9631 0.8284 0.7279 0.6498 0.5359 0.4251 0.3978 0.3168 0.2633 0.1970 0.1311 0.0983
0.5000 0.7071 0.8090 0.8660 0.9010 0.9239 0.9397 0.9511 0.9659 0.9781 0.9808 0.9877 0.9914 0.9952 0.9979 0.9968
0.2887 0.5000 0.6882 0.8660 1.038 1.207 1.374 1.539 1.866 2.352 2.514 3.157 3.798 5.077 7.629 10.18
0.4330 1.000 1.721 2.598 3.634 4.828 6.182 7.694 11.20 17.64 20.11 31.57 45.58 al.23 183.1 325.7
n = number of sides, N = 3600/n = angle subtended at the center by one side, 1 = length of one side= R (2 sin (~12) = r(2 tan a/2), R = radius of circumscribed circle = L(% csc u/2) =r(sec a/2). r = radius of inscribedcircle = R (cos a/2)= L(% cot ~12).and area = L* (l/4 n cot (u/2) = R2 (% n sin (u)= r2 (n tan 0(/2).
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
TABLE (n), =I. (n), =R. (n)? =[n(n notations ”
l)]/(lx 2). (r~)~=[n(n
1.16-BINOMIAL
l)(n
& MEASURES
1-37
COEFFICIENTS
2)]/(1x 2 x 3). etc., m
general, (n), = n(n - l)(n - 2)
[n - (r-
l)]/(lx 2 x 3
xr) Other
nCr=(nir) = (nJr
cm,
(n).
m,
bid
w,
1
I
1
2 3
1 1
2 3
;
1
4
1
4
6
4
ml,
5
1
5
10
10
5
1
6
1
6
15
20
15
6
1
7
1
7
21
35
35
21
7
70
56
28
126
126
64
Hi
21
m
8
1
8
1
a
28
9 10
1
9
36
56 a4
1
10
45
120
210
252
210
120
45
11
1
11
55
165
330
462
462
330
165
12
1
12
66
220
495
792
924
792
495
13
1
13
78
286
715
1,287
1.716
1.716
I ,287
2::
14
1
14
91
364
2,002
3,003
3,432
3.003
1 001
364
91
14
I5
1
15
105
455
1.001 1.365
3.003
5.005
6,435
6,435
3.003
1.365
455
105
36
9 11
1 12
1
78
13
1
PETRC ILEUM
l-38
TABLE
Number
0
1.17-COMMON
LOGARITHMS
E:NGINEERING
HANDBOOK
(1.OO TO 2.00)
1
2
3
4
5
6
8
9
1.00 1.01 1.02 1.03 1.04
0.0000 0.0043 0.0086 0.0128 00170
0.0004 0.0048 0.0090 0.0133 00175
0.0009 0.0052 0.0095 0.0137 0.0179
0.0013 0.0056 a0099 6.0141 0.0183
o.0017 0.0060 0.0103 0.0145 0.0187
o.0022 0.0065 0.0107 0.0149 0.0191
0.0026 0.0069 0.0111 0.0154 0.0195
0.0030 0.0073 0.0116 0.0158 0.0199
0.0035 0.0077 00120 0.0162 0.0204
0.0039 0.0082 0.0124 0.0166 0.0208
1.05 1 06 1.07 1.08 109
0.0212 0.0253 0.0294 0.0334 0.0374
0.0216 0.0257 0.0298 0.0338 0.0378
0.0220 0.0261 0.0302 0.0342 0.0382
0.0224 0.0265 0.0306 0.0346 0.0386
0.0228 0.0269 0.0310 0.0350 0.0390
0.0233 0.0273 0.0314 0.0354 0.0394
0.0237 0.0278 0.0318 0.0358 0.0398
0.0241 0.0282 0.0322 0.0362 0.0402
00245 0.0286 0.0326 0.0366 00406
0.0249 0.0290 0.0330 0.0370 0.0410
1.10 1.11 1.12 1.13 1 14
0.0414 0.0453 0.0492 0.0531 0.0569
0.0418 0.0457 0 0496 0.0535 00573
0.0422 0.0461 0 0500 0.0538 0.0577
00426 00465 00504 0.0542 00580
00430 0 0469 00508 00546 00584
0.0434 0.0473 0.0512 0.0550 00588
0.0438 0.0477 0.0515 0.0554 0.0592
0.0441 0.0481 0.0519 0.0558 0.0596
00445 00484 00523 00561 0 0599
0.0449 0.0488 0.0527 0.0565 0.0603
1.15 1.16 1.17 1.18 1.19
0.0607 0.0645 00682 0.0719 0.0755
0.0611 0.0648 0.0686 0.0722 0.0759
0.0615 0.0652 0.0689 0.0726 0.0763
0.0618 00656 0.0693 0.0730 0.0766
0.0622 0.0660 0 0697 00734 00770
0.0626 0.0663 0.0700 0.0737 0.0774
0.0630 0.0667 0.0704 0.0741 0.0777
0.0633 0.0671 0.0708 0.0745 0.0781
00637 00674 00711 0.0748 00785
0.0641 0.0678 0.0715 0.0752 0.0788
1.20 1 21 1.22 1.23 1.24
0.0792 0.0828 0.0864 0.0899 0.0934
0 0795 0.0831 0.0867 0.0903 0.0938
0.0799 0.0835 0.0871 0.0906 0.0941
0.0803 0.0839 0.0874 0.0910 0.0945
00806 00842 0.0878 0.0913 0.0948
0.0810 0.0846 0.0881 0.0917 0.0952
0.0813 0.0849 0.0885 0.0920 0.0955
0.0817 0.0853 0.0888 0.0924 0.0959
0.0821 00856 0 0892 0 0927 0 0962
0.0824 0.0860 0.0896 0.0931 0.0966
1.25 1.26 1.27 1.28 1.29
0.0969 0.1004 0.1038 0.1072 01106
0.0973 0.1007 0 1041 01075 0.1109
0.0976 0.1011 0.1045 0.1079 0.1113
0.0980 0.1014 0.1048 0.1082 0.1116
0 0983 01017 0.1052 01086 01119
0.0986 0.1021 0.1055 0.1089 0.1123
0.0990 0.1024 0.1059 0.1092 0.1126
0.0993 0.1028 0.1062 0.1096 0.1129
0.0997 01031 01065 0.1099 0.1133
0.1000 0.1035 0.1069 0.1103 0.1136
1.30 1.31 1.32 1.33 1.34
0.1139 0.1173 0.1206 0.1239 0.1271
0.1143 01176 0.1209 0.1242 0.1274
0.1146 0.1179 0.1212 0.1245 0.1278
0.1149 0.1183 0.1216 0.1248 0.1281
01153 01186 0.1219 0 1252 01284
0.1156 0.1189 0.1222 0.1255 0.1287
0.1159 0.1193 0.1225 0.1258 0.1290
0.1163 0.1196 0.1229 0.1261 0.1294
01166 0.1199 01232 01265 01297
0.1169 0.1202 0.1235 0.1268 0.1300
1.35 1.36 1.37 1.38 1.39
0.1303 0.1335 0.1367 0.1399 0.1430
0.1307 0.1339 0.1370 0.1402 0.1433
0.1310 0.1342 0.1374 0 1405 0.1436
01313 0.1345 0.1377 0.1408 0.1440
01316 0 1348 0.1380 01411 0 1443
0.1319 0.1351 0.1383 0.1414 0.1446
0.1323 0.1355 0.1386 0.1418 0.1449
0.1326 0.1358 0.1389 0.1421 0.1452
01329 01361 01392 01424 01455
0.1332 0.1364 0.1396 0.1427 0.1458
1.40 1.41 1.42 1.43 1.44
0.1461 01492 0.1523 0.1553 0.1584
0.1464 0.1495 0.1526 0.1556 0.1587
0.1467 0.1498 0.1529 01559 0.1590
0.1471 01501 01532 0.1562 0.1593
01474 01504 01535 0.1565 01596
0.1477 01508 0.1538 0.1569 0.1599
0.1480 0.1511 0.1541 0.1572 0.1602
0.1483 0.1514 0.1544 0.1575 0.1605
01486 01517 01547 01578 01608
0.1489 0.1520 0.1550 01581 0.1611
1.45 1.46 1.47 1.48 1.49
0.1614 0 1644 0.1673 0.1703 0.1732
0.1617 0.1647 0.1676 0.1706 0.1735
0.1620 0.1649 0.1679 01708 0.1738
0.1623 0.1652 0.1682 01711 0.1741
0.1626 0 1655 0.1685 01714 0.1744
0.1629 0.1658 0.1688 01717 0.1746
0.1632 0.1661 0.1691 0.1720 0.1749
0.1635 0.1664 0.1694 0.1723 0.1752
01638 01667 0.1697 01726 01755
0.1641 0 1670 01700 0.1729 0.1758
Average Difference 4
3
Moving the decimal polntn places to the right(orleft) In the number requiresadding +n (or-n) in the body of the table See Table 1.18.
MATHEMATICALTABLES
& UNITS
&SYSTEMSOFWElGHTS&
TABLE 1.17-COMMON
Number
0
1
2
3
MEASURES
I-39
LOGARITHMS (1.00 TO 2.00) (continued)
4
5
6
7
8
9
1.51 1.52 1.53 1.54
0.1761 0.1790 0.1818 0.1847 0.1875
0.1764 0.1793 0.1821 0.1850 0.1878
0.1767 0.1796 0.1824 0.1853 0.1881
0.1770 0.1798 0.1827 0.1855 0.1884
0.1772 0 1801 0.1830 0.1858 0.1886
0.1775 0.1804 0.1833 0.1861 0.1889
0.1778 0.1807 0.1836 0.1864 0.1892
0.1781 0.1810 0.1838 0.1867 0.1895
01784 0 1813 0.1841 0 1870 0.1898
0.1787 0.1816 0.1844 0 1872 0.1901
1.55 1.56 1.57 1.58 1.59
0.1903 01931 0.1959 0.1987 02014
0.1906 0.1934 0.1962 0.1989 0.2017
0.1909 0.1937 0.1965 0.1992 0.2019
0.1912 0.1940 0.1967 0.1995 0.2022
0.1915 0.1942 0.1970 0.1998 0.2025
0.1917 0.1945 0.1973 0.2000 0.2028
0.1920 0.1948 0.1976 0.2003 0.2030
0.1923 0.1951 0.1978 0.2006 0.2033
01926 01953 0.1981 0.2009 0.2036
0.1928 0.1956 0.1984 0.2011 0.2038
1.60 1.61 1 62 1 63 1.64
02041 0.2068 0.2095 02122 02148
0.2044 0.2071 0.2098 0.2125 0.2151
0.2047 0.2074 0.2101 0.2127 0.2154
0.2049 0.2076 0.2103 0.2130 0.2156
0.2052 0.2079 0.2106 0.2133 0.2159
0.2055 0.2082 0.2109 0.2135 0.2162
0.2057 0.2084 0.2111 0.2138 0.2164
0.2060 0.2087 0.2114 0.2140 0.2167
0.2063 0.2090 0.2117 0.2143 0.2170
0.2066 0.2092 0.2119 0.2146 0.2172
1.65 1.66 167 1.68 1.69
02175 0.2201 02227 02253 0 2279
0.2177 0.2204 0.2230 0.2256 0.2281
0.2180 0.2206 0.2232 0.2258 0.2284
0.2183 0.2209 0.2235 0.2261 0.2287
0.2185 0.2212 0.2238 0.2263 0.2289
0.2188 0.2214 0.2240 0.2266 0.2292
0.2191 0.2217 0.2243 0.2269 0.2294
0.2193 0.2219 0.2245 0.2271 0.2297
0.2196 0.2222 02248 02274 0.2299
0.2198 0.2225 0.2251 0.2276 0.2302
1.70 1.71 1 72 1 73 1.74
02304 02330 0.2355 0.2380 0.2405
0.2307 0.2333 0.2358 0.2383 0.2408
0.2310 0.2335 0.2360 0.2385 0.2410
0.2312 0.2338 0.2363 0.2388 0.2413
0.2315 0.2340 0.2365 0.2390 0.2415
0.2317 0.2343 0.2368 0.2393 0.2418
0.2320 0.2345 0.2370 0.2395 0.2420
0.2322 0.2348 0.2373 0.2398 0.2423
02325 0.2350 02375 02400 0.2425
0.2327 0.2353 0.2378 0.2403 0.2428
1.75 176 1.77 1.78 1.79
02430 0.2455 0.2480 0.2504 0.2529
0.2433 0.2458 0.2482 0.2507 0.2531
0.2435 0.2460 0.2485 0.2509 0.2533
0.2438 0.2463 02487 0.2512 0.2536
0.2440 0.2465 0.2490 0.2514 0.2538
0.2443 0.2467 0.2492 0.2516 0.2541
0.2445 0.2470 0.2494 0.2519 0.2543
0.2448 0.2472 0.2497 0.2521 0.2545
0.2450 0.2475 0 2499 02524 0.2548
0.2453 0.2477 0.2502 0.2526 0.2550
1.80 1.81 1.82 1.83 1.84
0.2553 0 2577 0.2601 0.2625 0.2648
0.2555 0.2579 0.2603 0.2627 0.2651
0.2558 0.2582 0.2605 0.2629 0.2653
0.2560 0.2584 02608 0.2632 02655
0.2562 0.2586 0.2610 0.2634 0.2658
0.2565 0.2589 0.2613 0.2636 0.2660
0.2567 0.2591 0.2615 0.2639 0.2662
0.2570 0.2594 0.2617 0.2641 0.2665
0.2572 0.2596 0.2620 02643 0.2667
0.2574 0.2598 0.2622 0.2646 0.2669
1.85 1.86 1.87 1.88 1 89
0.2672 0 2695 0.2718 0.2742 0.2765
0.2674 0.2697 0.2721 0.2744 0.2767
0.2676 0.2700 0.2723 0.2746
02679 0.2702 0.2725 0 2749 0.2772
0.2681 0.2704 0.2728 0.2751 0.2774
0.2683 0.2707 0.2730 0.2753 0.2776
0.2686 0.2709 0.2732 0.2755 0.2778
0.2688 0.2711 0.2735 0.2758 0.2781
0.2690 0 2714 0.2737 0.2760 0.2783
0.2693 0.2716 0.2739 0.2762 0.2785
1.90 1.91 1 92 1 93 194
0.2788 0.2810 0.2833 0.2856 0.2878
0.2790 0.2813 0.2835 0.2858 0.2880
0.2815 0.2838 0.2860 0.2882
0.2794 0.2817 02840 02862 02885
0.2797 0.2819 0.2842 0.2865 0.2887
0.2799 0.2822 0.2844 0.2867 0.2889
0.2801 0.2824 0.2847 0.2869 0.2891
0.2804 0.2826 0.2849 0.2871 0.2894
02806 0.2828 0.2851 0.2874 0.2896
0.2808 0 2831 0.2853 0.2876 0.2898
195 196 197 1 98 1 99
0.2900 0.2923 0.2945 0.2967 0.2989
0.2903 0.2925 0.2947 0.2969 0.2991
0.2905 0.2927 0.2949 0.2971 0.2993
0 2907 0 2929 0.2951 0.2973 0.2995
0.2909 0.2931 0.2953 0.2975 0.2997
0.2911 0.2934 0.2956 0.2978 0.2999
0.2914 0.2936 0.2958 0.2980 0.3002
0.2916 0.2938 0.2960 0.2982 0.3004
0.2918 0.2940 0.2962 0.2984 0.3006
0.2920 0.2942 0.2964 0.2986 0.3008
1 so
0.2769 0.2792
Average Difference 3
2
Mowng the decimal pointn places 10 the right[orleft)in the number requiresadding +n (or-r?)in the body of the table See Table 1.18
PETROLEUM
I-40
TABLEl.lB-COMMON
1
HANDBOOK
LOGARITHMS
Average Difference
1.0 1.1 1.2 1.3 1.4
0.0000 0.0414 0.0792 0.1139 0.1461
0.0043 0.0453 0.0828 0.1173 0.1492
2 __ 0.0086 0.0492 0.0864 0.1206 0.1523
1.5 1.6 1.7 1.8 1.9
0.1761 0.2041 0.2304 0.2553 0.2788
0.1790 0.2068 0.2330 0.2577 0.2810
0.1818 0.2095 0.2355 0.2601 0.2833
0.1847 0.2122 0.2380 0.2625 0.2856
01875 0.2148 0.2405 0.2648 0.2878
0.1903 0.2175 0.2430 0.2672 0.2900
0.1931 0.2201 0.2455 0.2695 0.2923
0.1959 0.2227 0.2480 0.2718 0.2945
0.1987 0.2253 0.2504 0.2742 0.2967
0.2014 0.2279 0.2529 0.2765 0.2989
2.0 2.1 2.2 2.3 2.4
0.3010 0.3222 0.3424 03617 0.3802
0.3032 0.3243 0.3444 0.3636 0.3820
0.3054 0.3263 0.3464 0.3655 0.3838
0.3075 0.3284 0.3483 0.3674 0.3856
0.3096 0.3304 0.3502 0.3692 0.3874
0.3118 0.3324 0.3522 0.3711 0.3892
0.3139 0.3345 0.3541 0.3729 0.3909
0.3160 0.3365 0.3560 0.3747 0.3927
0.3181 0.3385 0.3579 0.3766 0.3945
0.3201 0.3404 0.3598 0.3784 0.3962
21 20 19 18 17
2.5 2.6 2.7 2.8 2.9
0.3979 0.4150 04314 04472 0.4624
0.3997 0.4166 0.4330 04487 0.4639
0.4014 0.4183 0.4346 0.4502 0.4654
0.4031 04200 0.4362 04518 0.4669
0.4048 04216 0.4378 0.4533 0.4683
0.4065 0.4232 0.4393 0.4548 0.4698
0.4082 0.4249 0.4409 0.4564 0.4713
0.4099 0.4265 0.4425 0.4579 0.4728
0.4116 04281 0.4440 0.4594 0.4742
0.4133 0.4298 0.4456 0.4609 0.4757
17 16 16 15 15
3.0 31 3.2 3.3 3.4
0.4771 0 4914 0.5051 0.5185 0.5315
0.4786 0.4928 0.5065 0.5198 0.5328
0.4800 0.4942 0.5079 0.5211 0.5340
0.4814 0.4955 0.5092 0.5224 0.5353
0.4829 0.4969 0.5105 0.5237 0.5366
0.4843 0.4983 0.5119 0.5250 0.5378
0.4857 0.4997 0.5132 0.5263 0.5391
0.4871 0.5011 0.5145 0.5276 0.5403
0.4886 0.5024 0.5159 0.5289 0.5416
0.4900 0.5038 0.5172 0.5302 0.5428
14 14 13 13 13
3.5 3.6 3.7 3.8 3.9
0.5441 0.5563 0.5682 0.5798 0.5911
0.5453 0.5575 0.5694 0.5809 0.5922
0.5465 0.5587 0.5705 0.5821 0.5933
0.5478 0.5599 0.5717 0.5832 0.5944
0.5490 0.5611 0.5729 0.5843 0.5955
0.5502 0.5623 0.5740 0.5855 0.5966
0.5514 0.5635 0.5752 0.5866 0.5977
0.5527 0.5647 0.5763 0.5877 0.5988
0.5539 0.5658 0.5775 0.5888 0.5999
0.5551 0.5670 0.5786 0.5899 0.6010
12 12 12 11 11
4.0 4.1 4.2 4.3 4.4
0.6021 0.6128 0.6232 0.6335 0.6435
0.6031 0.6138 0.6243 0.6345 0.6444
0.6042 0.6149 0.6253 0.6355 0.6454
0.6053 0.6160 0.6263 0.6365 0.6464
0.6064 0.6170 0.6274 0.6375 0.6474
0.6075 0.6180 0.6284 0.6385 0.6484
0.6085 0.6191 0.6294 0.6395 0.6493
0.6096 0.6201 0.6304 0.6405 0.6503
0.6107 0.6212 0.6314 0.6415 0.6513
0.6117 0.6222 0.6325 0.6425 0.6522
11 10 10 10 10
4.5 4.6 4.7 4.8 4.9
0.6532 0.6628 0.6721 0.6812 0.6902
0.6542 0.6637 0.6730 0.6812 0.6911
0.6551 0.6646 0.6739 0.6830 0.6920
0.6561 0.6656 0.6749 0.6839 0 6928
06571 0.6665 0.6758 0.6848 0.6937
0.6580 0.6675 0.6767 0.6857 0.6946
0.6590 0.6684 0.6776 0.6866 0.6955
0.6599 0.6693 0.6785 0.6875 0.6964
0.6609 0.6702 0.6794 0.6884 0.6972
0.6618 0.6712 0.6803 0.6893 0.6981
10 10 9 9 9
5.0 5.1 52 5.3 5.4
0.6990 0.7076 0.7160 0.7243 0.7324
0.6998 0.7084 0.7168 0.7251 0.7332
0.7007 0.7093 0.7177 0.7259 0.7340
0.7016 0.7101 0.7185 07267 07348
0.7024 07110 0.7193 0.7275 07356
0.7033 0.7118 0.7202 0.7284 0.7364
0.7042 0.7126 0.7210 0.7292 0.7372
0.7050 0.7135 0.7218 0.7300 0.7380
0.7059 0.7143 0.7226 0.7308 0.7388
0.7067 0.7152 0.7235 0.7316 0.7396
9 8' 8 8 8
5.5 5.6 5.7 5.8 59
0.7404 0.7482 0.7559 0.7634 0.7709
0.7412 0 7490 0.7566 0.7642 0.7716
0.7419 0.7497 0.7574 0.7649 0.7723
07427 0.7505 07582 07657 07731
0.7435 0.7513 0.7589 0.7664 0.7738
0.7443 0.7520 0.7597 0.7672 0.7745
0.7451 0.7528 0.7604 0.7679 0.7752
0.7459 0.7536 0.7612 0.7686 0.7760
0.7466 0.7543 0.7619 0.7694 07767
0.7474 0.7551 0.7627 0.7701 0.7774
8 8 8 7 7
Number
0
ENGINEERING
3 ~ 0.0128 0.0531 0.0899 0.1239 0.1553
4 ~ 0 0170 0.0569 0 0934 0.1271 0.1584
5
6
7
8
9
0.0212 0.0607 0.0969 0.1303 0.1614
0.0253 0.0645 0.1004 0.1335 0.1644
0.0294 0.0682 0.1038 0.1367 0.1673
0.0334 0.0719 0.1072 0.1399 0.1703
0.0374 0.0755 0.1106 0.1430 0.1732
See See See See See
Table Table Table Table Table
1.17 1.17 1.17 1.17 1.17
See See See See See
Table Table Table Table Table
1.17 1.17 1.17 1.17 1.17
This tablegivesthecommon logarithmsof numbers between 1 and 10,correcltofourplaces.Moving the decimalpointn places to the right(or left) in the number is equivalentto adding n (or -n) to the logarithm.Thus, log 0.017453=0.2419-2, which may also be written2.2419 or 8.2419- 10. For example, log(ab)=log a+log b, log (aN)=N log a, log(alb)=loga-log b, and log(?'a)=l/N log a.
MATHEMATlCALTABLES&
UNlTS&SYSTEMSOFWElGHTS&
TABLE
Number
0
l-41
MEASURES
1.18- -COMMON
LOGARITHMS
(continued)
1
2
3
4
5
6
7
8
9
Average Difference
6.0 6.1 6.2 6.3 6.4
0.7782 0.7853 0.7924 0.7993 0.8062
0.7789 0.7860 0.7931 0.8000 0.8069
07796 07868 0.7938 0.8007 0.8075
0.7803 0.7875 0.7945 0.8014 0.8082
0.7810 0.7882 0.7952 0.8021 0.8089
0.7818 0.7889 0.7959 0.8028 0.8096
0.7825 0.7896 0.7966 0.8035 0.8102
0.7832 0.7903 0.7973 0.8041 0.8109
0.7839 0.7910 0.7980 0.8048 0.8116
0.7846 0.7917 0.7987 0.8055 0.8122
6.5 6.6 6.7 6.8 6.9
0.8129 0.8195 0.8261 0.8325 0.8388
0.8136 0.8202 0.8267 0.8331 0.8395
0.8142 0.8209 0.8274 0.8338 0.8401
0.8149 0.8215 0.8280 0.8344 0.8407
0.8156 0.8222 0.8287 0.8351 0.8414
0.8162 0.8228 0.8293 0.8357 0.8420
0.8169 0.8235 0.8299 0.8363 0.8426
0.8176 0.8241 0.8306 0.8370 0.8432
0.8182 0.8248 0.8312 0.8376 0.8439
0.8189 0.8254 0.8319 0.8382 0.8445
6 6 6
7.0 7.1 7.2 7.3 7.4
0.8451 0.8513 0.8573 0.8633 0.8692
0.8457 0.8519 0.8579 0.8639 0.8698
0.8463 0.8525 0.8585 0.8645 0.8704
0.8470 0.8531 0.8591 0.8651 0.8710
0.8476 0.8537 0.8597 0.8657 0.8716
0.8482 0.8543 0.8603 0.8663 0.8722
0.8488 0.8549 0.8609 0.8669 0.8727
0.8494 0.8555 0.8615 0.8675 0.8733
0.8500 0.8561 0.8621 0.8681 0.8739
0.8506 0.8567 0.8627 0.8686 0.8745
6 6 6 6 6
7.5 76 7.7 7.8 7.9
0.8751 0.8808 0.8865 0.8921 0.8976
0.8756 0.8814 0.8871 0.8927 0.8982
0.8762 0.8820 0.8876 0.8932 0.8987
0.8768 0.8825 0.8882 0.8938 0.8993
0.8774 0.8831 0.8887 0.8943 0.8998
0.8779 0.8837 0.8893 0.8949 0.9004
0.8785 0.8842 0.8899 0.8954 0.9009
0.8791 0.8848 0.8904 0.8960 0.9015
0.8797 0.8854 0.8910 0.8965 0.9020
0.8802 0.8859 0.8915 0.8971 0.9025
6 6 6 6 5
8.0 81 82 8.3 8.4
0.9031 0.9085 09138 0.9191 0 9243
0.9036 0.9090 09143 0.9196 0 9248
0.9042 0.9096 0.9149 0.9201 0.9253
0.9047 0.9101 0.9154 0.9206 0.9258
0 9053 0.9106 09159 0.9212 0.9263
0.9058 0.9112 0.9165 0.9217 0 9269
0.9063 0.9117 0.9170 0.9222 0.9274
0.9069 0.9122 0.9175 0.9227 0.9279
0.9074 0.9128 09180 0.9232 0.9284
0.9079 0.9133 0.9186 0.9238 0.9289
5 5 5 5 5
85 8.6 8.7 8.8 8.9
0 9294 0.9345 0.9395 0.9445 0.9494
0.9299 0.9350 0.9400 0.9450 0.9499
0.9304 0.9355 0.9405 0.9455 0.9504
0.9309 0.9360 0.9410 0.9460 0.9509
0.9315 0.9365 0.9415 0.9465 0.9513
0.9320 0.9370 0.9420 0.9469 0.9518
0.9325 0.9375 0.9425 0.9474 0.9523
0.9330 0.9380 0.9430 0.9479 0.9528
0.9335 0.9385 0.9435 0.9484 0.9533
0.9340 0.9390 0.9440 0.9489 0.9538
5 5 5 5 5
9.0 9.1 9.2 9.3 9.4
0.9542 0.9590 0.9638 0.9685 0.9731
0.9547 0.9595 0.9643 0.9689 0.9736
0.9552 0.9600 0.9647 0.9694 0.9741
0.9557 0.9605 0.9652 0.9699 0.9745
0.9562 0.9609 0.9657 0.9703 0.9750
0.9566 0.9614 0.9661 0.9708 0.9754
0.9571 0.9619 0.9666 0.9713 0.9759
0.9576 0.9624 0.9671 0.9717 0.9763
0.9581 0.9628 0.9675 0.9722 0.9768
0.9586 0.9633 0.9680 0.9727 0.9773
5 5 5 5 5
9.5 9.6 9.7 9.8 9.9
0.9777 0.9823 0.9868 0.9912 0.9956
0.9782 0.9827 0.9872 0.9917 0.9961
0.9786 0.9832 0.9877 0.9921 0.9965
0.9791 0.9836 0.9881 0.9926 0.9969
0.9795 0.9841 0.9886 0.9930 0.9974
0.9800 0.9845 0.9890 0.9934 0.9978
0.9805 0.9850 0.9894 0.9939 0.9983
0.9809 0.9854 0.9899 0.9943 0.9987
0.9814 0.9859 0.9903 0.9948 0.9991
0.9818 0.9863 0.9908 0.9952 0.9996
5 4 4 4 4
109 v=o
4971 log &2=0
1961, log $t2=09943
log \,<=02466.
log e-04343,
and log (04343)=06378-
1
PETROLEUM
1-42
TABLE
1.19-DEGREES
AND
MINUTES
EXPRESSED
1 2 3 4 5 6 L 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
00175 0.0349 0.0524 0.0698 0.0873 0.1047 0.1222 0 1396 01571 0.1745 0.1920 0.2094 0.2269 02443 02618 0 2793 0.2967 0.3142 0.3316 0.3491 0.3665 0.3840 0.4014 0.4189 0.4363 0.4538 0.4712 0.4887 0.5061 0.5236 0.5411 0.5585 0.5760 0.5934 0.6109 0.6283 0.6458 0.6632 0.6807 0.6981 0.7156 0.7330 0.7505 0.7679 0.7854 0.8029 0.8203 0.8378 0.8552 0.8727 0 8901 0.9076 0.9250 0.9425 0 9599 0.9774 0 9948 1.0123 1.0297 1.0472
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
a5 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180
Arc ,“=00,74533. Arc ,‘=0000290888,Arc ‘See aim Table 1 40
2.1118 2.1293 2.1468 21642 2.1817 21991 2.2166 22340 2.2515 22689 2.2864 23038 2.3213 2.3387 23562 2.3736 2.3911 24086 24260 2.4435 2.4609 2.4784 2.4958 2.5133 25307 25482 2.5656 2.5831 2.6005 2.6180 2.6354 2.6529 2.6704 2.6878 27053 27227 2.7402 2.7576 2.7751 2.7925 2.8100 2.8274 28449 2.8623 28798 2.8972 29147 2.9322 2.9496 2.9671 2.9845 3.0020 3.0194 3.0369 3.0543 3.0718 3.0892 3.1067 3.1241 3.1416
1~=000000484814
O”.Ol 00.02 00 03 00.04 00.05 OO.06 00.07 O" 08 00.09 00.10 00.11 00 12 00.13 00.14 00.15 OO.16 00.17 OO.18 00.19 00.20 00.21 00.22 OO.23 OO.24 OO.25 0".26 00.27 OO.28 00 29 0".30 00.31 0".32 00.33 00.34 00.35 OO.36 00.37 0".38 00.39 OO.40 00.41 OO.42 0043 00.44 00.45 OO.46 00 47 OO.48 00.49 00.50
1 radnn
00002 00003 0.0005 00007 0.0009 0.0010 00012 00014 0.0016 00017 0.0019 00021 0.0023 00024 00026 00028 00030 0.0031 00033 00035 00037 0.0038 0.0040 0.0042 00044 00045 00047 0.0049 0.0051 0.0052 0.0054 00056 0.0058 0.0059 0.0061 0.0063 0.0065 0.0066 0.0068 0.0070 0.0072 0.0073 0.0075 0.0077 0.0079 0.0080 00082 0.0084 0.0086 0.0087
HANDBOOK
IN RADIANS’
Hundredths
Degrees 1.0647 1.0821 1.0996 1.1170 1.1345 1.1519 1.1694 1.1868 1.2043 1.2217 1.2392 1.2566 1.2741 12915 1.3090 1.3265 1.3439 1.3614 1.3788 1.3963 1.4137 1.4312 1.4486 1.4661 1.4835 1.5010 1.5184 1.5359 1.5533 1.5708 1.5882 1.6057 1.6232 1.6406 1.6581 1.6755 1.6930 1 7104 1.7279 1.7453 1.7628 1.7802 1.7977 1.8151 18326 18500 1.8675 1.8850 1.9024 1.9199 1.9373 1.9548 1.9722 1.9897 20071 2.0246 2.0420 2.0595 2.0769 2.0944
ENGINEERING
OO.51 OO.52 00.53 00 54 00.55 OO.56 00.57 OO.58 00.59 OO.60 OO.61 OO.62 OO.63 OO.64 0".65 00.66 OO.67 00.68 OO.69 00.70 00.71 OO.72 00.73 00.74 00.75 OO.76 00.77 00.78 00.79 00.80 OO.81 0".82 OO.83 0".84 OO.85 00.86 OO.87 00.88 OO.89 00.90 00.91 00.92 00.93 00.94 00.95 OO.96 00.97 0".98 00.99 10.00
Minutes 0.0089 0.0091 0.0093 0.0094 0.0096 0.0098 0.0099 0.0101 0.0103 0.0105 0.0106 0.0108 0.0110 0.0112 0.0113 0.0115 0.0117 0.0119 0.0120 0.0122 0.0124 0.0126 0.0127 0.0129 0.0131 0.0133 0.0134 0.0136 0.0138 0.0140 0.0141 0.0143 0.0145 0.0147 0.0148 0.0150 0.0152 0.0154 0.0155 0.0157 0.0159 0.0161 0.0162 0.0164 0.0166 0.0168 0.0169 0.0171 0.0173 0.0175
= 57”0295780=57°17’07468=57017’44”0806
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
0.0003 0.0006 00009 0.0012 0.0015 0.0017 0.0020 00023 0.0026 0.0029 0.0032 0.0035 0.0038 0.0041 0.0044 00047 0.0049 00052 0.0055 0.0058 0.0061 0.0064 0.0067 0.0070 0.0073 0.0076 0.0079 0.0081 00084 0.0087 0.0090 0.0093 0.0096 0.0099 0.0102 0.0105 00108 0.0111 0.0113 0.0116 0.0119 0.0122 0.0125 0.0128 0.0131 00134 0.0137 0.0140 00143 0.0145 00148 0.0151 00154 00157 00160 0.0163 0.0166 0.0169 0.0172 0.0175
MATHEMATICALTABLE
!S & UIVlTS&
SYSTEMSOFWEIGHTS
& MEASURES
TABLEl.PO-RADIANSEXPRESSED 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 042 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.50 0.51 0.52 0.53 0.54 0.55 0.56 0.57 0.58 0.59 0.60 0.61 0.62 0.63
00.57 10.15 I" 72 20.29 20.86 30.44 40.01 4O.58 5O.16 50.73 6O.30 60.88 70.45 8O.02 8O.59 90.17 90.74 100.31 lo".89 II='.46 12O.03 12O.61 13O.18 130.75 14O.32 140.90 150.47 16O.04 16O.62 170.19 17".76 18O.33 18O.91 IgO. 2OO.05 2OO.63 210.20 210.77 22O.35 220.92 230.49 24O.06 24O.64 25O.21 25".78 26O.36 26O.93 27O.50 28".07 28O.65 290.22 290.79 300.37 30".94 310.51 320.09 32O.66 33O.23 33O.80 34O.38 34O.95 35O.52 36O.10
0 64 0.65 066 0 67 0.68 0 69 0.70 0.71 0.72 0.73 0.74 0.75 0.76 0.77 0.78 0.79 0.80 081 0.82 0.83 0.84 0.85 0.86 0.87 0.88 0.89 0.90 0.91 0.92 0.93 0.94 0.95 0.96 0.97 0.98 0.99 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26
36O 67 37".24 37O.82 38O.39 38O .96 39".53 400.11 4OO.68 41O.25 41".83 42O.40 42O.97 430.54 44O.12 44O.69 45O.26 45O.84 46O.41 46O.98 47O.56 480.13 48O.70 49O.27 49O .85 5OO.42 500.99 510.57 52O.14 52O.71 530.29 53O.86 540.43 550.00 55O.58 56O.15 56O.72 570.30 57O.87 58".44 590.01 590.59 600.16 6OO.73 61O.31 610.88 62O.45 63'=.03 63O.60 64O.17 64O.74 65O.32 65O.89 66'=.46 67O.04 67O.61 680.18 68O.75 69".33 69".90 7OO.47 71O.05 71O.62 72O.19
1.27 1.28 1.29 1.30 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 1.40 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.50 1.51 1.52 1.53 1.54 1.55 1.56 1.57 1.58 1.59 1.60 1.61 1.62 1.63 1.64 1.65 1.66 1.67 1.68 1.69 1.70 171 172 173 1.74 1.75 1.76 1.77 1.78 1.79 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89
72O.77 730.34 73" 91 74' 48 75O.06 75'63 76O.20 76".78 770.35 770.92 780.50 790.07 79O.64 8OO.21 8OO.79 81O.36 81O.93 82O.51 83O.08 83O.65 84O.22 84O.80 85".37 85O.94 86O.52 87O.09 87O.66 88O.24 880.81 89O.38 89".95 900.53 910.10 91° 67 920.25 92O 82 930.39 930 97 940.54 950.11 95O.68 96O.26 96O.83 97O.40 97O.98 98O.55 99O.12 99O.69 lOOO.27 loo='.84 1010.41 1010.99 102O.56 1030.13 1030.71 104O.28 104O.85 105O.42 106°.00 106O.57 107O.14 107O.72 108O.29
1.90 1.91 1.92 1.93 1.94 1.95 1.96 1.97 1.98 1.99 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 2.30 2.31 2.32 2.33 2.34 2.35 2.36 2.37 2.38 2.39 2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50 2.51 2.52
1-43
IN DEGREES 108O.86 1090.43 110~.01 IlOO. 1110.15 1110.73 112O.30 112O.87 1130.45 114O.02 1140.59 115".16 1150.74 116O.31 1160.88 117O.46 118°.03 1180.60 119O.18 1190.75 12OO.32 12OO.89 121O.47 1220.04 122O.61 123O.19 123O.76 124O.33 124O.90 125O.48 126O.05 126O.62 127O.20 127O.77 128O.34 128O.92 1290.49 130a.06 13OO.63 131O.21 131O.78 132O.35 132O.93 133O.50 134O.07 134O.65 135O.22 1350.79 136O.36 136O.94 1370.51 138O.08 138O.66 1390.23 139O.80 1400.37 140".95 141O.52 142O.09 142O.67 143O.24 144O.81 144O.39
2.53 2.54 2.55 2.56 2.57 2.58 2.59 2.60 2.61 2.62 2.63 2.64 2.65 2.66 2.67 2.68 2.69 2.70 2.71 2.72 2.73 2.74 2.75 2.76 2.77 2.78 2.79 2.80 2.81 2.82 2.83 2.84 2.85 2.86 2.87 2.88 2.89 2.90 2.91 2.92 2.93 2.94 2.95 2.96 2.97 2.98 2.99 3.00 3.01 3.02 3.03 3.04 3.05 3.06 3.07 3.08 3.09 3.10 3.11 3.12 3.13 3.14 3.15
144O 96 1450 53 146O IO 146O.68 147O 25 147'82 148O.40 148O.97 1490.54 150~11 150°69 151° 26 151O.83 152O.41 152O.98 1530.55 1540.13 154O.70 155O.27 155O.84 156O.42 156O .99 157O.56 158O.14 158O.71 159O.28 1590.86 16OO.43 161'.00 161O.57 162O.15 162O.72 163O.29 163O87 164O.44 165O 01 165O.58 166O16 166O.73 167O.30 167O.88 168O.45 169O.02 169O.60 170~.17 1700.74 1710.31 71O.89 72O.46 730.03 73O.61 74O.18 740.75 750.33 750.90 76O.47 1770.04 177O.62 178O.19 178O.76 1790.34 1790.91 18OO.48
lnterpolatlon 0.0002 0.0004 0.0006 0.0008 0.0010 0.0012 0.0014 0.0016 0.0018 0.0020 0.0022 0.0024 0.0026 0.0028 0.0030 0.0032 0.0034 0.0036 0.0038 0.0040 0.0042 0.0044 0.0046 0.0048 0.0050 0.0052 0.0054 0.0056 0.0058 0.0060 0.0062 0.0064 0.0066 0.0068 00070 0.0072 0.0074 0.0076 0.0078 0.0080 0.0082 0.0084 0.0086 0.0088 0.0090 0.0092 0.0094 0.0096 0.0098
00.01 00.02 00.03 00 05 0".06 00.07 0".08 OO.09 00.10 00.11 00.13 OO.14 00.15 OO.16 00.17 OO.18 00.19 00.21 00.22 0".23 OO.24 OO.25 OO.26 00.28 00.29 00.30 00.31 OO.32 00.33 00.34 OO.36 00.37 OO.38 00.39 00.40 00.41 OO.42 00.44 OO.45 On.46 00.47 OO.48 00.49 00.50 OO.52 00.53 00.54 OO.55 OO.56
Multiplesof r 1 2 3 4 5 6 7 8 9 IO
3.1416 6.2832 9.4248 12.5664 15.7080 18.8496 21.9911 25.1327 28.2743 31.4159
180° 360° 5400 720° 9000 1,080° 1,260" 1,4400 1,620" 1.800°
PETROLEUM
l-44
TABLE
1 .Pl-NATURAL
SINES
AND
ENGINEERING
HANDBOOK
COSINES
Natural Stnes at Intervalsof O0 01 or 6"
(498')
Degrees
0.9
01 0
154'1
(60')
Average Degrees
0 0000
90
00140 00314
00157 00332
0.0175 0 0349
89
00506 0.0680
0.0523
E
0.0645
0.0488 00663
0.0698
86
0.0000 0.0175
0.0017 00192
00035 00209
00052 00227
00070 0.0244
00087 00262
0.0105
0.0122
0 0279
0 0297
0.0349 0.0523
00366 00541
00384 0.0558
0.0401 00576
00419 0 0593
00436 00610
00454
0.0471
0 0628
Difference 17 17 17 17
0.0698
0.0715
00732
00750
00767
00785
0 0802
00819
00837
00854
0.0872
a5
17
5 6
0.0872 0.1045
0.0889 01063
00906 0.1080
0.0924
0 0958
0 0976
0 0993
0.1011
0.1028
0.1045
01132
01149
01167
7
0.1219
01236
0.1253
0.1271
01288
01305
01323
0 1340
0 1184 0.1357
01201 01374
0.1219 0.1392
84 83
17
0.1097
0.0941 01115
01461
82
17 17 17
8
01392
01409
0.1426
0.1444
01478
01495
01513
0 1530
01547
0.1564
81
9
0.1564
01582
0.1599
0.1616
01633
01650
01668
01685
0 1702
01719
0.1736
80
17
10 11 12
0.1736 01908 02079
0.1754 0.1925 02096
0.1771 01942 02113
0.1788 01959 02130
01805 01977 02147
01822 0.1994 02164
0.1840 0.2011 0 2181
0.1857 02028 0 2198
0.1874 0.2045 0.2215
0.1891 0.2062 0.2233
0.1908 0.2079 0.2250
79 78 77
17 17 17
13
0 2250
0.2267
0.2284
0.2300
02317
0.2334
02351
0.2368
0.2385
0.2402
0.2419
76
17
14
02419
02436
02453
02470
02407
0.2504
0 2521
0 2538
0.2554
0.2571
0.2588
75
17
15 16
0.2588 02756
02605 0.2773
0.2622 0.2790
0.2639
0.2656
0.2672
0.2689
0.2706
02723
0.2740
74
17
0.2807
02823
0.2840
02074
0.2890
0.2907
17
0 2924
0.2940
0 2957
0 2974
0 2990
0.3007
02857 0.3024
0.2756 0.2924
0.3040
0 3057
0.3074
0.3090
73 72
17 17
18
03090
03107
0.3123
0.3140
03156
0.3173
03190
0.3206
0.3223
0.3239
0.3256
71
17
19
0.3256
03272
0.3289
03305
03322
0.3338
03355
0.3371
0.3387
0.3404
0.3420
70
16
20 21
0.3420 0 3584 03746
0.3437 0.3600 0.3762
0.3453 0.3616 0.3778
0 3469 0.3633 0 3795
03486 0.3649
03502 0.3665 0.3827
0.3518 0.3681
0.3535 0 3697
03551 0.3714
0.3567 0.3730
0.3584 03746
69 68
16 16
03811
03843
0.3859
0.3875
0.3891
0.3907
67
16
23 24
0.3907
0.3923
0.3939
0.3955
0.3971
0.3987
16
0.4115
04131
0.4147
04195
04210
0.4067 0.4226
66
04099
04019 04179
0.4051
04083
0.4003 04163
0 4035
0.4067
65
16
25 26
0.4226 04384
04242 0.4399
04258 0.4415
04274 0.4431
0 4289 0.4446
04305 0.4462
0.4321 04478
04337 0.4493
04352 0.4509
0.4368 0.4524
0.4540
64 63
16 16
22
0.4384
27
0 4540
04555
0.4571
0.4586
04602
0.4617
04633
04648
0.4664
0.4679
0 4695
62
16
28 29
04695 0 4848
04710 0.4863
0.4726 0.4879
04741
04756 0.4909
0.4772 0.4924
04787
0.4818 0.4970
0.4848
61
0 4939
0.4802 0 4955
0.4833
0.4894
0.4985
0.5000
60
15 15
30 31
05000 0.5150
0.5015 0.5165
0.5030 0.5180
0.5045 0.5195
0.5060 05210
0.5075 0.5225
0 5090
0.5120 0.5270
0.5135 0.5284
0.5150
59
0.5240
05105 0 5255
0.5299
58
15 15
32
05299
0.5314
0.5329
0.5344
05358
0.5373
0.5388
0.5402
0.5417
0.5432
0.5446
0 5446
0.5461
0.5476
0.5490
0.5505
0.5519
0 5548
0.5563
0.5577
0 5592
34
05592
05606
05621
05635
05650
0.5664
0.5534 0.5678
57 56
15
33
0 5693
0.5707
0.5721
05736
55
14
35 36
05736 0.5878
05750 0.5892
05764 0.5906
0 5779 0.5920
0 5793 0 5934
0.5807 0.5948
05821 0.5962
0.5835 0.5976
0.5850 0.5990
0.5864 0.6004
0.5878 06018
54 53
14 14
37 38
06018 06157
06032 06170
0.6046 06184
0.6060 06198
06074 06211
06088 06225
0.6101 0 6239
0.6115 0.6252
0.6129 0.6266
0.6143 0.6280
0.6157 0.6293
52 51
14 14
15
39
06293
06307
0.6320
0.6334
06347
0.6361
0.6374
0.6388
0.6401
0.6414
0.6428
50
13
40 41
06428 0.6561
06441 0.6574
0.6455 0.6587
0.6468
06481
0.6494
0.6508
0.6521 0.8652
0.6534
0.6547
49 48
13
06665
0 6678
42
0.6691
0.6704
06717
0.6600 0.6730
0.6561 06691
06743
06756
0.6769
0.6782
0.6794
0 6807
0.6820
47
13
43 44
0 6820
0.6833
06845
06858
06871
06884
0.6896
0.6909
06921
0 6934
0.6947
46
13
0.6947
0.6959
06972
0 6984
0 6997
0 7009
0.7022
0.7034
0.7046
0.7059
07071
45
12
45
0 7071
07083
07096
07108
0 7120
0.7133
0.7145
0.7157
0.7169
0 7181
07193
44
12
46
07193
07206
07218
07230
07242
07254
0.7266
0 7278
0 7290
07314
43
12
47
07314
0.7325
07337
0 7349
07361
07373
07385
0 7396
0 7408
0 7302 0 7420
07431
42
12
48
0 7431
0.7443
07455
07466
07478
0 7490
0 7501
0.7513
0 7524
0 7536
07547
41
12
49
07547
0.7559
07570
07581
0 7593
07604
0.7615
0.7627
0 7638
0 7649
0 7660
40
11
“8 =;5:
)
(46')
06613
06626
0.6639
01
0.0
(6’)
(0')
Natural Comes
'For IO' mtervals.see Table 1 24
13
MATHEMATICAL
TABLES
& UNITS & SYSTEMS
TABLE Natural Smes
1.21-NATURAL
SINES
& MEASURES
AND
COSINES
l-45
(continued)
at Intervals 01 O" 01 or 6"
(i3)
Degrees
50 51
OF WEIGHTS
07660 07771
0 7672 0 7782
0.7683 07793
0 7694 07804
04
"6
(24’) 0.7705 0 7615
(36') 07716 0 7826
0.7727 07837
(2)
01.0 (i88')
07738 07848
0 7749 0 7859
Wl 0.7760 0.7869
07771 0.7880
Average Degrees
Difference
39 38
11 11
52
07880
0 7891
0.7902
07912
0 7923
0 7934
0 7944
0 7955
0 7965
0.7976
0.7986
53
0 7986
0 7997
0.8007
0 8018
0 8028
0 8049
0 8059
08070
0.8080
0.8090
2
10
11
54
0 8090
08100
08111
0.8121
0.8131
0 8039 0 8141
08151
08161
08171
0.8181
0.8192
35
10
55 56
0 8192 08290
0 8202 08300
0.8211 0.8310
08221 0.8320
0.8231 0 8329
0 8241 08339
08251 08348
08261 0.8358
0 8271 08368
0.8281 08377
0.8290 0.8387
34 33
10 10
57
0.8387
0.8396
0.8406
0.8415
0.8425
08434
08443
0.8453
08462
08471
0.8480
32
9
58 59
08480
0 8490
08517 0.8607
0 8526 08616
08536 08625
08563 0.8652
31
9
0.8634
08554 08643
0.8572
0.8581
0.8508 0.8599
08545
08572
0.8499 0.8590
0.8660
30
9
60 61
08660 0.8746
0 8669
08678
0 8695
0 8704
08712
08721
0 8729
08738
0.8746
29
0.8755
08763
08686 0.8771
0.8780
0.8788
0 8796
0.8805
08813
0.8821
0.8829
28
62
0.8830 08918
0.8846 08926
0.8854
0.8862
0.8670
0.8678
0.8902
0 8942
0 8949
0 8957
0 8973
0.8980
0.8910 0.8988
27
0 8934
0.8886 08965
0 8894
63
0.8829 08910
64
0 8988
0.8996
0.9003
0.9011
09018
0 9026
0 9033
0.9041
0 9048
0.9056
0.9063
25
65 66
0 9063 0.9135
0.9070 0.9143
0.9078 0.9150
0 9085 0.9157
0 9092 0.9164
09100 0.9171
0.9107 0.9178
09114
09121
0.9135
24
0.9184
09191
09128 0.9198
0.9205
23
7 7
67
0.9205
0.9212
0.9219
a.9239
0.9245
0 9252
0 9259
0.9265
0.9272
22
7
0.9272
0.9278
0.9285
0.9225 0.9291
0.9232
68
0.9298
0.9304
0.9311
0.9317
09323
0.9330
0.9336
21
6
69
0 9336
0.9342
0.9348
0.9354
0.9361
0 9367
0 9373
0.9379
0 9385
0.9391
0.9397
20
6
70 71
0.9397 0.9455
0.9403 09461
0.9409 0.9466
0.9415 0.9472
0.9421
0.9426 0.9483
0.9432 0 9489
0.9438 0.9494
09444
0.9449 0.9505
0.9455 0.9511
19 18
6 6
0.9478
0.9500
26
72
0.9511
0.9521 0.9573
0.9532
0.9537
0.9542
0.9588
0.9593
09603
0.9563 0.9613
5
0.9583
0.9558 0.9608
17
0.9578
0 9548 0.9598
0 9553
0.9563
09516 0.9568
0.9527
73
16
5
74
0.9613
0.9617
0.9622
0.9627
0.9632
0.9636
09641
0 9646
0 9650
0.9655
0.9659
15
5
75
0.9659 0.9703
0.9664
0.9668
0.9673
0.9677
0 9681
0 9686
0 9690
0 9694
0.9699
0.9703
14
4
0 9707
0.9711
09715
0 9720
0 9724
0.9728
09751
0.9755
0.9759
0.9763
09767
0.9736 0.9774
0.9744
0 9748
0.9732 09770
0.9740
0.9744
0.9778
0.9781
13 12
4 4
78
0.9781
0 9785
0.9789
0.9792
0.9796
0.9799
0.9803
0.9806
09810
0.9813
0.9816
11
3
79
0.9816
0.9820
0 9823
0.9826
0.9829
0.9833
0 9836
0.9839
0.9842
0.9845
0.9848
10
3
80 81
0.9848 0 9877
0.9854
0.9857
0.9860
0.9863
0 9866
0.9869
0.9874
0.9877
3
0.9903
0 9882 0 9907
0 9885 0.9910
0.9888 09912
0 9890 09914
0.9893 0.9917
0.9895 0.9919
09871 0.9898
82
0.9851 0 9880 0 9905
09921
0.9900 0.9923
0 9903 0.9925
3 2
83
0 9925
0 9928
0 9930
0 9932
0 9934
0 9936
0.9938
0.9940
0.9942
0.9943
0.9945
2
84
0.9945
0 9947
0 9949
09951
0.9952
0.9954
0.9956
0.9957
0.9959
0.9960
0 9962
85 86
0.9962 0 9976
0 9963 0 9977
0 9965 0 9978
0.9966 0 9979
0.9968 0 9980
0.9969 09981
0.9971 0 9982
0.9972 0.9983
0.9973 0 9984
0.9974 0 9985
0.9976 0 9986
87
0 9986
0 9987
0 9988
0.9989
0 9990
0 9990
0.9991
0.9992
0 9993
0.9993
0 9994
88
0 9995
0 9995
0 9996
0 9996
0 9997
0 9997
0.9997
0 9999
0 9999
0 9999
0 9999
10000
10000
10000
0.9998 10000
0.9998
89
0.9994 0 9998
10000
90
1.0000
,,"%,
(6 )
76 77
09 =(54 )
01
03 (18')
Natural
'For IO intervals see Table 1 24
2 4 3 2
1 1
0.9998
1
10000
0
:, 0
l-46
PETROLEUM
TABLE 1.22-NATURAL Natural Tangents
HANDBOOK
TANGENTS AND COTANGENTS
at Intervalsof On.1 or 6"
0.0 Degrees
ENGINEERING
".6
=(O')
(;8')
(36’1
0.7
0.9
"1 0
(42')
(54')
6301
0.0314
0 0349
90 89 88
0.0489 0.0664
0.0507 0.0682
0.0524 0 0699
07 86
17 18 18
0.0087 00262
00105 0.0279
0.0122
0 0140
0.0192
0.0070 00244
0.0297
0 0349 00524
00367 0.0542
0.0384 0 0559
0.0402 0.0577
0.0419 0.0594
0.0437 00612
00454 00629
0.0472 0.0647
00175
17 17
00175
0.0000 0.0052 0.0227
0.0017
Average Difference
0.0157 0.0332
00035 0.0209
0 0000
Degrees
0 0699
0.0717
0 0734
0.0752
0.0769
00787
00805
0.0822
0 0840
00857
0.0675
65
5
00875
0.0892
00910
0.0928
0.0945
00963
00981
0.0998
0.1016
0.1033
01051
64
18
6 7 a
0 1051
01069
0 1086
0.1104
0.1122
0.1139
0 1228 01405
0.1246 0.1423
01263 01441
0.1281 01459
0.1299 0.1477
0.1317 01495
0.1157 01334 01512
0.1175 0.1352 0.1530
0.1192 0.1370 01548
0.1210 0.1388
63 82
0 1566
01228 0.1405 0.1584
18 18 18
9
0 1584
0.1602
0.1620
01638
0.1655
01673
0 1691
0.1709
0.1727
01745
01763
80
18
10
01763
0.1761
01799
01817
0.1835
01853
0.1871
01690
0.1908
0.1926
01944
79
18
11 12 13 14
01944 02126
0.1962 02144
0.1996 0.2180 0.2364
0.2016 0.2199 0.2382
02035 0.2217 02401
02053 02235 02419
0.2089 0.2272
0.2107 0.2290
0.2438
0.2456
0.2475
0.2126 02309 0 2493
78 77 76
18 18
0 2493
02327 02512
01980 02162 02345
0.2071 0.2254
0 2309
0.2530
0 2549
02566
02586
0.2605
02623
0.2642
0.2661
0 2679
75
19 19
81
15
0 2679
0 2698
0.2717
02736
0.2754
02773
0 2792
0.2811
0.2630
0.2849
0.2867
74
19
16 17 18
02867
0 2905 0.3096 03268
0 2924
0.2943
0 2962
03057 0 3249
0.2886 0.3076 0.3269
03115 0 3307
0.3134 03327
03153 03346
0.2981 03172
0 3000 0 3191
0.3019 0.3211
0.3038 0.3230
03057 03249
73 72
19 19
0.3365
03385
0.3404
0.3424
0.3443
71
19
19
03443
0.3463
0.3462
0 3502
03522
03541
0.3561
0.3561
03600
03620
0.3640
70
20
0.3759 0.3959
0 3779
0.3799
0.3819
0 3839
69
20
0.4163
0.3979 0.4163
0.4000 0.4204
0.4020 0.4224
0.4040 04245
68 67
20 21
20
03640
0 3659
0 3679
0 3699
0.3719
03739
21 22 23
0 3839 04040 04245
0.3859 0.4061 04265
0 3879 04061 0.4266
0 3099 04101 04307
0.3919 0.4122
0 3939 04142
04327
04348
0.4369
0.4390
0.4411
0.4431
04452
66
21
24
04452
04473
0.4494
04515
04536
04557
0.4578
0.4599
0.4621
0.4642
04663
65
21
25
04663
04664
04706
0.4727
0.4746
04770
04791
0.4813
0.4834
0.4877
64
21
26 27
04877 0 5095 0.5317
0 4899 05117
04921 0.5139
0 4942 0.5161
0 4964 05184
0 4986 05206
05008 0.5228
0.5029
0.5051 0.5272
04856 05073
63 62
22 22
05340
0.5362
0 5364
05407
05430
05452
0.5475
0.5543
05566
0.5589
0 5612
05635
05658
05681
0.5704
30 31
0.5774
0.5820
0.5844
0.6009
05797 06032
06056
0 6080
0.5067 06104
0 5890 06128
32 33 34
0.6249 0.6494
06273 0.6519
0.6297 06544
0 6322 0 6569
06346 0 6594
06371 06619
05914 06152 0.6395
0.5938 0.6176 0.6420
0.6200 0.6445
0 6644
0.6745
06771
0.6796
0.6822
0.6847
06873
0 6899
0.6669 0.6924
0.6694 0.6950
35 36
0.7002 0.7265
07028 07292
07054 07319
07080 0 7346
0.7107
07133 0 7400
07159 0.7427
0.7186 0.7454
37 38 39
0.7536 0.7813
07563 07841
07618 0.7898 0.8185
0.7983
0.7729 08012
08214
07673 0 7954 08243
07701
08127
0 7590 0 7869 08156
0.7646
0 8098
08273
0.8302
40 41
06391 0.6693
08421
08451
0.8481
08511
08541
0.8571
0.8601
08724
42
0 9004
08754 0.9067
08785 0.9099
08816 09131
08847 09163
0.8678 0.9195
0 8910 0.9228
43 44
0 9325 0 9657
09391 0 9725
0.9424 0.9759
0 9457 0 9793
0.9490 0 9827
09523 0.9661
0 9556 0.9896
'.6
(2,
0.4
0.3
(24')
(18’)
28 29
0 9036 0.9358 09691
".8 (48')
07 142')
0.7373
0 7926
136’)
0.5250
0.5295
0 5095 05317
0.5498 0.5727
05520
05543
61
23
05750
05774
60
23
0.5961
05985 06224
06009 06249 0.6494
59 58
24 24
57
25
06745
56 55
25 26
54 53 52
26 27
0 6469 06720 06976
07002
0.7212 0.7481
0.7239 0.7508
07265 07536
0.7757
07785 0.8069 08361
07813 0 8098
0.8662
0.8693
08972 0.9293 0 9623 0 9965
0.8040 0.8332 08632 0.8941
0.9260 0.9590 0.9930
06391
intervals
see Table I 24
28 28 29 30
0 9004 0 9325
49 46 47
0 9657 10000
46 45
33 34
(6’) NaturalCotangents
'For 10
51 50
31 32
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
TABLE 1.22-NATURAL Natural Tanaenls
al Intervalsof 0" 1 0' 6
00 =(O 1
02 16 I
& MEASURES
TANGENTS AND
I-47
COTANGENTS
(continued)
' 07
"3
I12 /
(181
(42 I
45
10000
10035
1.0070
10105
1.0141
10176
46 47
10355 10724
10392 10761
1.0428 1.0799
10464 10837
1.0501 10875
10538 10913
“8
“9
01 0
(48 )
(54 )
(60)
10212 10575 10951
1.0247 10612 1.0990
1.0283 10649 11028
1.2261
1.0319 10686 1 1067
1.0355 1.0724 1.1106
1 1423
I 1463
11833
1 1875
Degrees
Average Difference
44 43 42
35 37 38
1 1504
41
1.1918
40
40 41
12305 12753
1.2349 12799
39 38
40
11106
1 1145
1.1184
1 1224
1 1263
1 1303
1 1343
49
11504
1 1544
1.1585
11626
11667
1 1708
11750
1.1383 1.1792
50 51 52
11918
1.1960
1.2002
12393 1.2846
12437 1.2892
12045 12482 1.2938
1.208R 1.2527
1.2131
12349 1.2799
12174 12617
1.2218 1.2662
12985
12572 13032
13079
1.3127
12708 13175
1.3222
13270
37
43 45 47
53
1.3270
1.3319
1.3367
54
1.3764
13814
1.3865
13416 13916
13465 13968
14019
13564 14071
1.3613 1.4124
13663 14176
13713 14229
1.3764 1.4281
36 35
49 52
55 56 57
14281 14826 1.5399
14335 14882 15458
1.4388 14938 1.5517
14442 14994 1.5577
1.5051 15637
1.4659 15224
14715 15282
14770 1.5340
1.4826 15399
34 33
55 57
15697
1.4605 1.5166 1.5757
15818
15880
15941
16003
32
60
58 59
1.6003 1.6643
16066 16709
1.6128 1.6775
16191 16842
16255 1.6909
16319 16977
1.6383 1.7045
1.6447 1.7113
16512 17182
1.6577 17251
16643 17321
31 30
64 67
60 61 62
1732
1739 1811
1746
1842 1.921
1775 1.849
1.782 1.857
1789 1865
1797 1873
1804 1.881
7 a
1889
1819 1.897
1753 1827
1767
1804 1881
63
1 963
1 971
1980
64
2.050
2.059
2069
65 66 ti7
2.145 2 246
2.154 2.257
2 164 2267
68 69
2.356 2 475 2 605
1.4496
1.3514 14550 1.5108
1905
1.760 1.834 1.913
1988 2078
1.997 2.087
2006
2174 2278 2391
2.184
2194
2.289 2.402
2.300 2414
2513
2.539
2.367
2379
2.488 2.619
2.500 2 633
2646
2.526 2.660
2097
2.675
1.929
1937
1946
1.954
1.963
29 28 27
2.014 2.106
2023 2.116
2 032 2 125
2.041 2.135
2.050 2.145
26 25
9 9
2204 2.311
2.215 2.322
2225 2 333
2236 2.344
2.246
24 23
10 11
2.426
2.438
2450
22
12
2.552 2.689
2.565 2.703
2578 2 718
2.463 2592
2356 2475 2605 2747
21 20
13 14
2.840 3.006
2.856 3.024
2.872
2.888
19 16
16 17
3.211
3.060 3.251
2.904 3.078
3.191
17 16
19 22
2 733
8
2747
2 762
2 778
2793
2808
2.824
2.904 3078 3271
2921 3.096 3.291
2937 3.115 3312
2.954
2.971
72 73
3133 3333
3152 3354
2.989 3.172 3.376
3 398
3420
3 042 3 230 3 442
3465
3 271 3487
74
3.487
3.511
3534
3558
3582
3606
3.630
3.655
3 681
3 706
3.732
15
24
75
3.732
3.758
3.785
3.812
3839
3.867
4.041
4.071
4102
4.331
4.437 4.829
4.548 4959
4586 5.005
4 625 5050
4.665 5.097
4.705
78
4402 4.787
13 12 11
28 32
4.366 4.745
4 165 4.511 4915
3.981 4.297
4331 4705
4 134 4.474 4.872
3952 4 264
14
4.011
3.923 4.230
4.011
76 77
3.895 4.198
79
5.145
5.193
5.242
5292
5.343
5396
5.449
5.503
5 558
5.614
5 671
80
5 671
5.730
5 789
5.850
5 912
5 976
6.107
6174
6.243
6.314
81 82 83
6.314 7.115 8.144
6.386 7.207 8.264
6.460
6.535 7396 a513
6612 7495 8.643
6 691
6.041 6.772
6.855
6 940
7.026
7115
7 596 8777
7.700 8.915
7806 9.058
7916 9205
8.028
8.144 9.514
84
9 514
9.677
70 71
7300 8386 9 845
5.145
1002
10.20
10.39
10.58
1078
1099
9.357 11.20
11.43
85
11.43
11.66
11.91
12.16
1243
12 71
13.00
13.30
1362
13.95
1430
86 87
1430 19 0.3
14.67 19.74
1506 2045
15.46 21 20
15.90 22 02
1635 2290
16.83 2386
17.34 2490
1789 2603
18.46 2727
1908 2864
88
2864
30.14
31 82
33.69
3580
52.08
89
57.29
63.66
71 62
81 a5
95 49
573.0
5729 m
01
0.0
90
38.19 1146
40.92 143.2
4407 191.0
4774 2865
oc
0.9
0.8
=(54')
(48')
(2,
0.2
(12’)
(6’)
(0’) NaturalCotanoents
10 9 a 7 6 5
37 44 53
PETROLEUM
l-48
TABLE
0.0 Degrees
1.23-NATURAL
SECANTS
".6
0.2
(36’1
=(O’)
(61,
(12’)
10000
1 0000
10000
10000
10000
10000
10002
10002
1.0002
1.0003
1.0003
1.0003
10006 10014
10007 1.0015
10007 1.0016
1.0008 1.0017
10009 1.0018
10010 10019
AND
ENGINEERING
HANDBOOK
COSECANTS
0.7
".8
(42')
(48')
“9 (54')
01 0
(60I 10000
Average Degrees
10001 10004
1.0001
10001
10001
10002
90 89
10004
10006
88
10011
1.0005 1.0012
1.0006
10010
1.0013
10020
10021
1.0022
10023
10014 10024
87 86
Difference
10024
10026
10027
1.0028
10030
10031
10032
10034
10035
10037
10038
85
10038
1.0040
10041
1.0043
10045
10046
10048
10050
04
10057
10059
1.0061
10063
10065
10067
10075
83
1.0075 1 0098 1.0125
10077 10101 10127
10079 10103
1.0082 1.0106
10086 10111
10089 10114
10093 1.0119
10096 10122
10098 10125
82 81
10130
10133
10084 1.0108 1.0136
10069 1.0091 1.0116
10053 10073
10055
1.0055
10051 1.0071
10139
10142
1.0145
1.0148
10151
10154
80
10
1.0154
1.0157
1.0161
1.0164
10167
1.0170
10174
10177
10180
10184
10187
79
11
1.0187
1.0191
1.0194
1.0198
10201
1.0205
1.0212
10216
1.0223 1.0263
1.0227 1.0267
1.0231 10271
1.0235 10276
10239 1.0280
1.0243 1.0284
10251 10293
10255 1.0297
10220 1.0259
10223
12 13
10209 10247 10288
10263 10306
78 77 76
14
10306
1.0311
10315
10320
10324
1.0329
10334
1.0338
10343
10348
10353
75
15
10353
10358
10363
1.0367
10372
10377
10382
1.0393
10398
10403
74
5
16
10403
1.0408
10413
1.0419
10424
1.0429
17 18
10457 10515
1.0463 10521
1.0468 10527
1.0474
10480 10539
1.0485 1.0545
1.0446 1.0503
73 72
5 6
1.0557
1.0564
1.0451 10509 1.0570
10457 10515 10576
71
19
10576
1.0583
10589
1.0533 1.0595
1.0435 10491 10551
1.0388 1.0440 1.0497
10602
10608
10615
1.0622
1.0628
1.0635
10642
70
6 7
20 21 22
10642
1.0649
10655
1.0662
10669
10676
10683
1.0690
1.0697
1.0704
10711
69
7
10711
10719 10793 1.0872
1 0726 10801 1 0880
1.0733 10808
10740 10816 10896
1.0748 10824
1.0755 10832
1.0763 10840
1.0770 1.0848
10785 10864
68 67
7 8
10904
10913
1.0921
1.0929
1.0778 1.0856 1.0938
10946
66
8 9
10302
23
t 0785 10864
24
10946
1.0955
1.0963
10972
10981
1.0989
10998
1.1007
1.1016
1.1025
1 1034
65
25
1 1034
1.1043
1.1052
1.1061
1 1070
1.1079
1 1089
1.1098
1.1107
1.1117
1 1126
64
9
26 27 28
1 1126 11223 1 1326
11136 11233 1 1336
1.1145 1.1243 1.1347
1.1155 1.1253 1.1357
1 1164 11264 1.1368
1.1174 1 1274 11379
11184 1 1284
1 1194 1.1294
1 .1213 1 .I315
1 1223 1 1326
63 62
1 1390
1.1401
.1203 .I305 .1412
1 .1423
1 1434
61
10 10 11
29
1 1434
1 1445
1.1456
1 1467
1.1478
1 1490
1 1501
1.1512
1524
1 1535
11547
60
11
30
11547
11559
1.1570
1.1582
11594
11606
1.1630
1 1642
1 1679 11805 1 1937
1.1691 1.1818 1.1951
11703 11831 1 1964
1.1716 1.1844 1.1978
1 1728 1 1857 1 1992
1.1753 1.1883
1766 1897
59 58 57
12
1.1666 1.1792 1.1924
1 1654 1 1779 1 .1910
1 1666
31 32 33
1 1618 1.1741 1 1870 12006
12020
34
1.2062
12076
1.2091
12105
1.2120
12134
12149
1.2163
.2034 2178
1 2048 1 2193
35
1.2208
12223
12238
1.2253
1.2283
12299
1.2314
1.2329
12345
36 37 38
1.2361 12521 12690
1.2376 1.2538 12708
12392 12554 1.2725
1.2408
12268 12424
12440
12489
12588 12760
12605 12778
12456 12622
12472
12571 1.2742
1.2639
12505 12673
12796
1.2849
39
1.2868
1.2886
1.2904
12923
1.2941
1.2960
1.2978
1.2813 12997
1.2656 1.2831 13016
13035
40 41
1.3054 13250
1.3073 13270
1.3093 13291
13112 13311
1.3131 13331
1.3151 1.3352
1.3171 13373
13456 13673 1 3902
1.3478
1.3499 1.3718 13949
13520 13741 13972
13542
1.3563
13629
1.3230 13435 13651
13763 13996
1.3786 14020
1.3585 13809 14044
1.3190 13393 13607
1.3210 1.3414
42
13832 1.4069
13855 1.4093
13878 14118
43 44
13696 13925 0.9 =(54
a.0 )
(48')
1.0888
07
(42’)
06 (36 I
a.5 (30')
04 (24')
03 (18')
02
(12’)
1 1792 1 1924
13 13 14
12062
56
12208
55
15
12361 12521
54
1 2690
53 52
15 16 17
12868 13054
51 50
18 19
13250 13456
49 48 47
20 21
46 45
23 24
1.3673 13902 14142 00 (0')
Natural Cotanoents
22
MATHEMATICAL
TABLES
& UNITS & SYSTEMS
TABLE 1.23-NATURAL
OF WEIGHTS
I-49
& MEASURES
SECANTS AND COSECANTS (continued)
Natural Secants at Intervalsof OO.1 or 6" "0 Deqrees
=10 )
0 1 (6 )
02
I12 1
"3
(181
04 (24 I
05 (30 I
“6
00
07
(48 1
09
"10
(601
Deqrees
(36 J
(42 )
1.4293 1.4554
1.4318
14344
1.4370
1 4396
44
1.4561
1.4608 1.4867
1.4663 1.4945 1.5243
43 42 41
(54 I
45
14142
1.4167
14192
14217
14242
14267
46 47 48
1.4396 14663 14945
1.4422
1.4440
1.4474
1.4690 1.4974
1.4718 15003
1.4746
14501 14774
14527 1.4802
1.5032
15062
15092
1.4830 15121
14659 1.5151
1.5182
14635 14916 1.5212
1.5461
Average Difference 25 27 28 30
49
15243
1.5273
1.5304
1.5335
15366
15398
1.5429
15493
1.5525
15557
40
31
50
15557
1.5590
1.5622
1.5655
15721
51 52
15890 16243
1.5925 16279
1.5959 16316
1.5994 16353
1.5686 1.6029 16390
1.5755 1.6099
1.5788 1.6135
1.5822 1.6171
1.6464
1.6540
1.5890 1.6243 16616
39 38 37
33 35 37
53
16616
16655
16694
1.6733
1.6772
1.6812
16852
1.6502 16892
15856 1.6207 1.6578
1.7013
36
17013
17054
1 7095
1.7137
1.7179
17221
17263
17305
1.6932 1.7348
1.6972
54
1.7391
1.7434
35
40 42
55
17434
1.7476
1.7522
1.7566
17610
17655
56 57
17883 18361
1.7929 18410
1.7976 1.9460
1.8023 1.8510
18070 1.8561
18118 1.8612
1.7700 18166 18663
1.7745 1.6214 18714
17791 18263 18766
1.7637 1.8312 18618
17863 1.6361 18871
34 33 32
45 48 51
58
18871
1.8924
18977
1.9031
19064
19139
1.9194
19249
19304
1.9416
31
54
59
19416
1.9473
1 9530
19587
19645
19703
1.9762
1.9821
19880
1.9360 1.9940
20000
30
58
60
2 000
2006
2.012
2016
2025
2031
2037
2.043
2.056
2.063
29
61 62
2063 2 130
2069 2.137
2.076 2.144
2082 2.151
2096 2166 2.241
2.103 2.173
2 109 2.180
2.050 2.116 2.188
2 123 2 195
2.130 2.203
28 27
6 7 7
16064 16427
63
2 203
2.210
2.218
2.226
2089 2 158 2233
2249
2.257
2.265
2 273
2.261
26
8
64
2.261
2.289
2.298
2306
2314
2323
2331
2.340
2.349
2.357
2.366
25
8
65 66 67
2366 2459 2 559
2375 2468 2570
2.364 2.478 2.581
2 393 2488 2591
2402 2498 2602
2.411
2.421
2.449
2 518 2.624
2.430 2 528 2.635
2439
2.508 2.613
2.536 2.647
2 549 2.658
2.459 2.559 2.669
24 23 22
9 10 11
68
2669
2661
2693
2 705
2716
2.729
2.741
2 753
2.765
2.778
2.790
21
12
69
2 790
2.603
2.816
2.829
2842
2.855
2669
2.682
2.896
2.910
2.924
20
13
70 71 72
2924 3072
2938 3087
2.952
2967 3 119
2 981 3135
2.996 3152
3.011 3.168
3.041 3.202
3.056 3.219
3.072 3.236
19 18
15 16
3 236
3.401
3.420
17
16
3420 3 628
3.254 3.440
3.382
73 74
3.564
3.606
16 15
21 24
75 76 77
3.864 4134
27
4445
4163 4.479
78 79
4 810 5 241
80
3.289
3307
3.326
3.344
3.026 3.185 3.363
3.460 3 673
3.480 3 695
3500 3 719
3521 3742
3542
3.563
3.766
3.790
3.814
3.839
3.628 3.864
3.915 4 192
3.941 4222
3967 4253
3994 4284
4.021 4315
4.049 4347
4.077 4.379
4.105 4.412
'4.134 4.445
14 13
4.514
4549
4584
4.620
4.657
4.694
4.732
4.771
4.610
12
36
4.850 5.288
4 890 5337
4931 5386
4973 5436
5016 5487
5059 5540
5.103 5.593
5.148 5647
5.194 5.702
5.241
11
5.759
10
43 52
5759
5.816
5875
5935
5996
81
6 392 7 185
6.464 7.276
6.537 7 368
6611 7.463
6687 7561
6.059 6765 7661
6.123 6.845 7 764
6.188 6.927 7670
6255 7.011 7.979
6.323 7.097 8091
6.392 7.185 8.206
:: 84
8 206 9567
a.324 9.728
8 446 9 895
8.834 1043
8.971 10.63
9.113
9 259 11 03
9.411 11.25
9.567 1147
85 66
11.47 14.34
3650 3.889
11.71 14.70
3.103 3.271
11 95 15.09
8571 1007
8 700 1025
12.20 1550
1247
1275 1636 2293
13.03 16.86
13.34 17.37
1365 1791
1399 18.49
1434 19.11
2368
24.92
2729
3820 114 6
4093 143.2
26.05 47.75
28.65 57.30 m
a7 88
1911 2865
19.77 30.16
20 47 31 84
21 23 33 71
1593 22 04 35 81
89
5730
6366
71 62
81 85
95 49
90
m
09 =154')
04 124'1
10.83
4408 191.0
2865
5209 573.0
02 112'1 Natural Cotangents
'For 10' intervals see Table 1 24
31
PETROLEUM
I-50
TABLE
1.24-TRIGONOMETRIC
Sines Degrees
FUNCTIONS(ATINTERVALS
Cosines
Tangents
ENGINEERING
HANDBOOK
OF 10')' Cotangents
Radians
Natural
Log"
Natural
Log'*
Natural
Log"
Natural ~_____
1 .oooo
0.0000
Log'*
1.0000
0.0000
7.400637 343po77 7.7648 171.89 7.9409 114.59 85.940 8.0658 68.750 8.1627
2.5:63 2.2352 2.0591 1.9342 1.8373
1.5708 1.5679 1.5650 1.5621 1.5592 1.5563
900 900 900 90" 900 90"
00’ 50’ 40' 30' 20' 10'
00 00 00 00 00 00
00' 10' 20' 30' 40' 50'
0.0000 0.0029 0.0058 0.0087 0.0116 0.0145
0.0000 0.0029 0.0058 0.0087 0.0116 0.0145
03 7.4637 7.7648 7.9408 8.0658 8.1627
1 .oooo
0.0000
1.0000 0.9999 0.9999
0.0000 0.0000 0.0000
0.0000 0.0029 0.0058 0.0087 0.0116 0.0145
10 10 10 10 1" IO
00' 10' 20' 30' 40' 50'
0.0175 0.0204 0.0233 0.0262 0.0291 0.0320
0.0175 0.0204 0.0233 0.0262 0.0291 0.0320
8.2419 8.3088 8.3668 8.4179 8.4637 8.5050
0.9998 0.9998 0.9997 0.9997 0.9996 0.9995
9.9999 9.9999 9.9999 9.9999 9.9998 9.9998
0.0175 0.0204 0.0233 0.0262 0.0291 0.0320
8.2419 8.3089 8.3669 8.4181 8.4638 8.5053
57.290 49.104 42.964 38.188 34.368 31.242
1.7581 1.6911 1.6331 1.5819 1.5362 1.4947
1.5533 1.5504 1.5475 1.5446 1.5417 1.5388
89" 89O 89" 890 890 89O
00' 50' 40' 30' 20' 10'
20 20 20 29 20 2"
00' 10' 20' 30' 40' 50'
0.0349 0.0378 0.0407 0.0436 0.0465 0.0495
0.0349 0.0378 0.0407 0.0436 0.0465 0.0494
8.5428 8.5776 8.6097 8.6397 8.6677 8.6940
0.9994 0.9993 0.9992 0.9990 0.9989 0.9988
9.9997 9.9997 9.9996 9.9996 9.9995 9.9995
0.0349 0.0378 0.0407 0.0437 0.0466 0.0495
8.5431 8.5779 8.6101 8.6401 8.6682 8.6945
28.636 26.432 24.542 22.904 21.470 20.206
1.4569 1.4221 13899 1.3599 1.3318 1.3055
1.5359 1.5330 1.5301 1.5272 1.5243 1.5213
880 880 88O 880 880 880
00' 50' 40' 30' 20' IO'
3" 30 3" 30 3" 3"
00' 10' 20' 30' 40' 50'
0.0524 0.0553 0.0582 0.0611 0.0640 0.0669
0.0523 0.0552 0.0581 0.0610 0.0640 0.0669
8.7188 8.7423 8.7645 8.7857 8.8059 8.8251
0.9986 0.9985 0.9983 09981 0.9980 0.9978
9.9994 9 9993 9.9993 9 9992 9.9991 9.9990
0.0524 0.0553 0.0582 0.0612 0.0641 0.0670
8.7194 8.7429 8.7652 8.7865 8.8067 8.8261
19.081 18075 17.169 16350 15.605 14.924
1.2806 12571 1.2348 12135 1.1933 1.1739
1.5184 1.5155 1.5126 1.5097 1.5068 1.5039
87" 870 870 870 870 87O
00' 50' 40' 30' 20' 10'
40 40 40 40 40 40
00' 10' 20' 30' 40' 50'
0.0698 0.0727 0.0756 0.0785 0.0814 0.0844
0.0698 0.0727 0.0756 0.0785 0.0814 0.0843
8.8436 8.8613 8.8783 8.8946 8.9104 8.9256
0.9976 0.9974 0.9971 0.9969 0.9967 0.9964
9.9989 9.9989 9.9988 9.9987 9.9986 9.9985
0.0699 0.0729 0.0758 0.0787 0.0816 0.0846
8.8446 8.8624 8.8795 8.8960 8.9118 8.9272
14.301 13.727 13.197 12.706 12251 11.826
1.1554 1.1376 1.1205 1.1040 1.0882 1.0728
1.5010 1.4981 1.4952 1.4923 1.4893 1.4864
860 86" 860 86O 860 860
00' 50' 40' 30' 20' 10'
50 5" 50 50 50 50
00' 10' 20' 30' 40' 50'
0.0873 0.0902 0.0931 0.0960 0.0989 0.1018
0.0872 0.0901 0.0929 0.0958 0.0987 0.1016
8.9403 8.9545 8.9682 8.9816 8.9945 9.0070
0.9962 0.9959 0.9957 0.9954 0.9951 0.9948
9.9983 9.9982 9.9981 9.9980 9.9979 9.9977
0.0875 0.0904 0.0934 0.0963 0.0992 0.1022
8.9420 8.9563 8.9701 8.9836 8.9966 9.0093
11.430 11.059 10.712 10.385 10078 9.7882
1.0580 1.0437 1.0299 1.0164 1.0034 0.9907
1.4835 1.4806 1.4777 1.4748 1.4719 1.4690
850 85O 850 85' 85O 850
00' 50' 40' 30' 20' 10'
6O 6O 6" 6' 6" 6O
00' IO' 20' 30' 40' 50'
0.1047 0.1076 0.1105 0.1134 0.1164 0.1193
0.1045 0.1074 0.1103 0.1132 0.1161 0.1190
9.0192 9.0311 9.0426 9.0539 9.0648 9.0755
0.9945 0.9942 0.9939 0.9936 0.9932 0.9929
9.9976 9.9975 9.9973 9.9972 9.9971 9.9969
0.1051 0.1080 0.1110 0.1139 0.1169 0.1198
9.0216 9.0336 9.0453 9.0567 9.0678 9.0786
9.5144 9.2553 9.0098 8.7769 8.5555 8.3450
0.9784 0.9664 0.9547 0 9433 0.9322 0.9214
1.4661 1.4632 1.4603 1.4574 1.4544 1.4515
840 84O 84" 840 840 84'
00' 50' 40' 30' 20' IO'
70 70 70 70 70 70
00' 10' 20' 30' 40' 50'
0.1222 0.1251 0.1280 0.1309 0.1338 0.1367
0.1219 0.1248 0.1276 0.1305 0.1334 0.1363
9.0859 9.0961 9.1060 9.1157 9.1252 9 1345
0.9925 0.9922 0.9918 0.9914 0.9911 0.9907
9.9968 9.9966 9.9964 9.9963 9.9961 9.9959
0.1228 0.1257 0.1287 0.1317 0.1346 0.1376
9.0891 9.0995 9.1096 9.1194 9.1291 9.1385
8.1443 7.9530 7.7704 7.5958 7.4287 7.2687
0.9109 0.9005 0.8904 0.8806 08709 0.8615
1.4486 1.4457 1.4428 1.4399 1.4370 1.4341
83O 83O 830 83" 83O 830
00' 50' 40' 30' 20' 10'
8" 8O 8" 8O 80 8O
00' IO' 20' 30' 40' 50'
0.1396 0.1425 0.1454 01484 0.1513 0.1542
0.1392 0.1421 0.1449 0.1478 0.1507 0.1536
9.1436 9.1525 9.1612 9.1697 9.1781 91863
0 9903 0.9899 0.9894 0.9890 0.9886 09881
9.9958 9.9956 9.9954 9.9952 9.9950 9 9948
0.1405 0.1435 0.1465 0.1495 0.1524 0.1554
9.1478 9.1569 9.1658 9.1745 9.1831 9.1915
7.1154 6.9682 6.8269 66912 6.5606 64348
0.8522 08431 08342 08255 0.8169 08085
1.4312 1.4283 1.4254 1.4224 1.4195 1.4166
820 82O 82" 82O 820 820
00' 50' 40' 30' 20' 10'
90 00' 9" 10' 9'120' 90 30' 90 40' 90 50'
01571 0.1600 0.1629 0.1658 0.1687 0.1716
0.1564 0.1593 0.1622 0.1650 0.1679 0.1708
91943 9.2022 9.2100 92176 9.2251 9.2324
0 9877 0.9872 0.9868 0 9863 0.9858 0.9853
9.9946 9.9944 9.9942 9.9940 9.9938 9.9936
0.1584 0.1614 0.1644 0.1673 0.1703 0.1733
9.1997 9.2078 9.2158 9.2236 9.2313 9.2389
63138 6.1970 60844 5.9758 5.8708 5.7694
08003 0.7922 07842 0.7764 0.7687 07611
14137 1.4108 14079 1.4050 1.4021 1.3992
810 81' 810 810 81° 810
00' 50' 40' 30' 20' 10'
Natural
Log"
Natural
Log"
Natural
Loo**
Cosines
'Far OD 1 mtervals, see Tables 1 21. 1 22. and 1 23 'Add 10 I" ,h?se columns
Sines
Cotangents
Natural
Loa"
Tangents
Radians
Degrees
MATHEMATICALTABLES&
UNlTS&SYSTEMSOFWElGHTS
TABLE 1.24-TRIGONOMETRIC
Tange nts
Radians
Natural
Loo"
Natural
Natural
Log"
00' 10' 20' 30' 40' 50'
0.1745 0.1774 0.1804 0.1833 0.1862 0.1891
0.1736 0.1765 0.1794 0.1822 0.1851 0.1880
9.2397 92468 9.2538 92606 9.2674 92740
0.9848 0.9843 0.9838 0.9833 0.9827 0.9822
0.1763 0.1793 0.1823 0.1853 0.1883 0.1914
9.2463 92536 9.2609 92680 9.2750 92819
11~00' 110 IO' 110 20' 110 30' 11" 40' 110 50'
0.1920 0.1949 0.1978 0.2007 0.2036 0.2065
0.1908 0.1937 0.1965 0.1994 0.2022 0.2051
92806 92870 9.2934 9.2997 93058 93119
09816 0.9811 0.9805 0.9799 0.9793 0.9787
99919 9.9917 9.9914 9.9912 9.9909 9.9907
0.1944 0.1974 0.2004 0.2035 0.2065 0.2095
120 120 120 120 120 120
00' 10' 20' 30' 40' 50'
0.2094 02123 0.2153 0.2182 0.2211 0.2240
0.2079 0.2108 0.2136 0.2164 0.2193 0.2221
9.3179 9.3238 0 3296 93353 9.3410 9.3466
0.9781 0.9775 0.9769 0.9763 0.9757 0.9750
9.9904 9.9901 9.9899 9.9896 9.9893 9.9890
130 130 130 130 130 130
00' IO' 20' 30' 40' 50'
0.2269 0.2298 0.2327 0.2356 0.2385 0.2414
0.2250 0.2278 0.2306 0.2334 0.2363 0.2391
93521 93575 9.3629 9.3682 9.3734 93786
0.9744 0.9737 0.9730 0.9724 0.9717 0.9710
140 140 140 140 140 140
00’ 10' 20' 30' 40' 50'
0.2443 0.2473 0.2502 0.2531 0.2560 0.2589
0.2419 0.2447 0.2476 0.2504 0.2532 0.2560
9.3837 9.3887 9.3937 9.3986 94035 9.4083
150 150 150 150 150 150
00' 10' 20' 30' 40' 50'
0.2618 0.2647 0.2676 0.2705 0.2734 0.2763
0.2588 0.2616 0.2644 0.2672 0.2700 0.2728
16O 16" 16O 16' 16O 16O
00' IO' 20' 30' 40' 50'
0.2793 0.2822 0.2851 0.2880 0.2909 0.2938
170 170 170 170 170 170
00' IO' 20' 30' 40' 50'
18O 18' 18O 18' la0 18O 190 190 190 19" 190 19"
100 100 IO" 100 10" 100
I-51
FUNCTIONS (AT INTERVALS OF 10’)’
Sil nes Degrees
&MEASURES
(continued)
Cotangents Natural ~~ 5.6713 5.5764 5.4845 5.3955 5.3093 5.2257
0.7537 0.7464 0.7391 0.7320 0.7250 0.7181
1.3963 1.3934 1.3904 1.3875 1.3846 1.3817
80" 80° 80' 80° 80' 80°
00' 50' 40' 30' 20' 10'
9.2887 9.2953 9.3020 9.3085 9.3149 9.3212
5.1446 5.0658
0.7113 0.7047
4.9894
0.6980
4.9152 4.8430 4.7729
0.6915 0.6851 0.6788
1.3788 1.3759 1.3730 1.3701 1.3672 1.3643
790 790 790 790 790 790
00’ 50' 40' 30' 20' IO'
0.2126 0.2156 0.2186 0.2217 0.2247 0.2278
9.3275 9.3336 9.3397 9.3458 9.3517 9.3576
4.7046 4.6382 4.5736 4.5107 4.4494 4.3897
0.6725 0.6664 0.6603 0.6542 0.6483 0.6424
1.3614 1.3584 1.3555 1.3526 1.3497 1.3468
78O 78' 78O 7%" 78O 78"
00' 50' 40' 30' 20' 10'
9.9887 9.9884 9.9881 9.9878 9.9875 9.9872
0.2309 0.2339 0.2370 0.2401 0.2432 0.2462
9.3634 9.3691 9.3748 9.3804 9.3859 9.3914
4.3315 4.2747 4.2193 4.1653 4.1126 4.0611
0.6366 0.6309 0.6252 0.6196 0.6141 0.6086
1.3439 1.3410 1.3381 1.3352 1.3323 1.3294
770 770 77" 770 770 770
00' 50' 40' 30' 20' IO'
0.9703 0.9696 0.9689 0.9681 0.9674 0.9667
9.9869 9.9866 9.9863 9.9859 9.9856 9.9853
0.2493 0.2524 0.2555 0.2586 0.2617 0.2648
9.3968 9.4021 9.4074 9.4127 9.4178 9.4230
4.0108 3.9617 3.9136 3.8667 3.8208 3.7760
0.6032 0.5979 0.5926 0.5873 0.5822 0.5770
1.3265 1.3235 1.3206 1.3177 1.3148 1.3119
76O 76" 76O 76' 76O 76"
00' 50' 40' 30' 20' IO'
9.4130 9.4177 9.4223 9 4269 9.4314 9 4359
0.9659 0.9652 0.9644 0.9636 0.9628 0.9621
9.9849 9.9846 9.9843 9.9839 9.9836 9.9832
0.2679 0.2711 0.2742 0.2773 0.2805 0.2836
9.4281 9.4331 9.4381 9.4430 9.4479 9.4527
3.7321 3.6891 3.6470 3.6059 3.5656 3.5261
0.5719 0.5669 0.5619 0.5570 0.5521 0.5473
1.3090 1.3061 1.3032 1.3003 1.2974 1.2945
75" 750 75" 750 75" 750
00' 50' 40' 30' 20' IO'
0.2756 0.2784 0.2812 0.2840 0.2868 0.2896
94403 9.4447 94491 94533 94576 9.4618
0.9613 0.9605 0.9596 0.9588 0.9580 0.9572
9.9828 9.9825 9.9821 9.9817 9.9814 9.9810
0.2867 0.2899 0 2931 0.2962 0 2994 0.3026
9.4575 9.4622 9.4669 9.4716 9.4762 9.4808
3.4874 3.4495 3.4124 3.3759 3.3402 3.3052
0.5425 0.5378 0.5331 0.5284 0.5238 0.5192
1.2915 1.2886 1.2857 1.2828 1.2799 1.2770
740 740 740 740 740 74"
00' 50' 40' 30' 20' IO'
0.2967 0.2996 0.3025 0.3054 0.3083 0.3113
0.2924 0.2952 0.2979 0.3007 0.3035 0.3062
9.4659 9.4700 9.4741 9.4781 9.4821 9.4861
0.9563 0.9555 0.9546 0.9537 0.9528 0.9520
9.9806 9.9802 9.9798 9.9794 9.9790 9.9786
0.3057 0.3089 0.3121 0.3153 0.3185 0.3217
9.4853 9.4898 9.4943 9.4987 9.5031 9.5075
3.2709 3.2371 3.2041 3.1716 3.1397 3.1084
0.5147 0.5102 0.5057 0.5013 0.4969 0.4925
1.2741 1.2712 1.2683 1.2654 1.2625 1.2595
730 730 730 730 730 730
00' 50' 40' 30' 20' IO'
00' 10' 20' 30' 40' 50'
0.3142 0.3171 0.3200 0.3229 0.3258 0.3287
0.3090 0.3118 0.3145 0.3173 0.3201 0.3228
9.4900 9.4939 9.4977 9.5015 9.5052 9.5090
0.9511 0.9502 0.9492 0.9483 0.9474 0.9465
9.9782 9.9778 9.9774 9.9770 9.9765 9.9761
0.3249 0.3281 0.3314 0.3346 0.3378 03411
9.5118 9.5161 9.5203 9.5245 9.5287 9.5329
3.0777 3.0475 3.0178 2.9887 2.9600 2.9319
0.4882 0.4839 0.4797 0.4755 0.4713 0.4671
1.2566 1.2537 1.2508 1.2479 1.2450 1.2421
72' 72' 72O 72O 72O 72O
00' 50' 40' 30' 20' IO'
00' IO' 20' 30' 40' 50'
0.3316 0.3345 0.3374 0.3403 0.3432 0.3462
0.3256 0.3283 0.3311 0.3338 0.3365 0.3393
9.5126 9.5163 9.5199 9.5235 9.5270 9.5306
0.9455 0.9446 0.9436 0.9426 0.9417 0.9407
9.9757 9.9752 9.9748 9.9743 9.9739 9.9734
0.3443 0.3476 0.3508 0.3541 0.3574 0.3607
9.5370 9.5411 9.5451 9.5491 9.5531 9.5571
2.9042 2.8770 2.8502 2.8239 2.7980 2.7725
0.4630 0.4589 0.4549 0.4509 0.4469 0.4429
1.2392 1.2363 1.2334 1.2305 1.2275 1.2246
710 710 710 710 710 710
00' 50' 40' 30' 20' 10'
Natural
Log"
Cosines
Natural
Log"
Sines
Natural
Log'*
Cotangents
Natural
Log"
Log**
Tangents
Radians
Degrees
'For0' 1 ~nlervals. see Tables 1 21. 1 22. and 1 23 "Add
10 I" these columns
(continuedon next page)
PETROLEUM
1-52
TABLE
1.24--TRIGONOMETRIC Sines
Dearees
FUNCTIONS Cow ies
(AT INTERVALS Tang{fnts
ENGINEERING
HANDBOOK
OF 10’)’ (continued) CotangE!rlts Log"
~Log"
Natural
Log'*
Natural
Log"
0.3420 0.3448 0.3475 0.3502 0.3529 0.3557
9.5341 9.5375 9.5409 9.5443 9.5477 9.5510
0.9397 0.9387 0.9377 0.9367 0.9356 0.9346
9.9730 9.9725 9.9721 9.9716 9.9711 9.9706
0.3640 0.3673 0.3706 0.3739 0.3772 0.3805
9.5611 9.5650 9.5689 9.5727 9.5766 9.5804
2.7475 2.7228 2.6985 2.6746 2.6511 2.6279
0.4389 0.4350 0.4311 0.4273 0.4234 0.4196
1.2217 1.2188 12159 1.2130 12101 1.2072
700 70" 700 7o" 700 700
00' 50' 40' 30' 20' 10'
Radians
~Natural
Natural
200 200 200 20" 200 200
00' 10' 20' 30' 40' 50'
0.3491 0.3520 0.3549 0.3578 0.3607 0.3636
210 210 21" 210 210 21"
00' 10' 20' 30' 40' 50'
0.3665 0.3694 0.3723 0.3752 0.3782 0.3811
0.3584 0.3611 0.3638 0.3665 0.3692 0.3719
9.5543 9.5576 9.5609 9.5641 9.5673 9.5704
0.9336 0.9325 0.9315 0.9304 0.9293 0.9283
9.9702 9.9697 9.9692 9.9687 9.9682 9.9677
0.3839 0.3872 0.3906 0.3939 0.3973 0.4006
9.5842 9.5879 9.5917 9.5954 9.5991 9.6028
2.6051 2.5826 2.5605 2.5386 2.5172 2.4960
0.4158 0.4121 0.4083 0.4046 0.4009 0.3972
1.2043 12014 1.1985 1.1956 1 1926 1.1897
69" 69O 69O 69O 69O 69O
00' 50' 40' 30' 20' 10'
220 220 220 220 220 220
00' IO' 20' 30' 40' 50'
0.3840 0.3869 0.3898 0.3927 0.3956 0.3985
0.3746 0.3773 0.3800 0.3827 0.3854 0.3881
9.5736 9.5767 9.5798 9.5828 9.5859 9.5889
0.9272 0.9261 0.9250 0.9239 0.9228 0.9216
9.9672 9.9667 9.9661 9.9656 9.9651 9.9646
0.4040 0.4074 0.4108 0.4142 0.4176 0.4210
9.6064 9.6100 9.6136 9.6172 9.6208 9.6243
2.4751 2.4545 2.4342 2.4142 2.3945 2.3750
0.3936 0.3900 0.3864 0.3828 0.3792 0.3757
1.1868 1.1839 1.1810 1 1781 1 1752 1.1723
680 680 68O 680 680 680
00' 50' 40' 30' 20' 10'
23O 23O 23O 23' 23O 23"
00' IO' 20' 30' 40' 50'
0.4014 0.4043 0.4072 0.4102 0.4131 0.4160
0.3907 0.3934 0.3961 0.3987 0.4014 0.4041
9.5919 9.5948 9.5978 9.6007 9.6036 9.6065
0.9205 0.9194 0.9182 0.9171 0.9159 0.9147
9.9640 9.9635 9.9629 9.9624 9.9618 9.9613
0.4245 0.4279 0.4314 0.4348 0.4383 0.4417
9.6279 9.6314 9.6348 9.6383 9.6417 9.6452
2.3559 2.3369 2.3183 2.2998 2.2817 2.2637
0.3721 0.3686 0.3652 0.3617 0.3583 0.3548
1.1694 1.1665 1 1636 1 1606 1.1577 1.1548
67O 00' 67" 50' 67O 40' 67O 30' 67'=20' 67O 10'
24" 24O 24O 24' 24" 24'
00' 10' 20' 30' 40' 50'
0.4189 0.4218 0.4247 0.4276 0.4305 0.4334
0.4067 0.4094 0.4120 0.4147 0.4173 0.4200
9.6093 9.6121 9.6149 9.6177 9.6205 9.6232
0.9135 0.9124 0.9112 0.9100 0.9088 0.9075
9.9607 9.9602 9.9596 9.9590 9.9584 9.9579
0.4452 0.4487 0.4522 0.4557 0.4592 0.4628
9.6486 9.6520 9.6553 9.6587 9.6620 9.6654
2.2460 2.2286 2.2113 2.1943 2.1775 2.1609
0.3514 0.3480 0.3447 0.3413 0.3380 0.3346
1.1519 1 1490 1 1461 1 1432 1.1403 1.1374
660 660 66" 66" 66" 660
00' 50' 40' 30' 20' IO'
250 25' 25O 25' 25O 25'
00' 10' 20' 30' 40' 50'
0.4363 0.4392 0.4422 0.4451 0.4480 0.4509
0.4226 0.4253 0.4279 04305 0.4331 0.4358
9.6259 9.6286 9.6313 9.6340 9.6366 9.6392
0.9063 0.9051 0.9038 0.9026 0.9013 0.9001
9.9573 9.9567 9.9561 9.9555 9.9549 9.9543
0.4663 0.4699 0.4734 0.4770 04806 04841
9.6687 9.6720 9.6752 9.6785 9.6817 9.6850
2.1445 2.1283 2.1123 2.0965 2.0809 2.0655
0.3313 0.3280 0.3248 0.3215 0.3183 0.3150
1.1345 1 1316 1.1286 1.1257 1.1228 1.1199
65O 65O 65O 65O 65O 65O
00' 50' 40' 30' 20' IO'
26' 26O 26' 26O 260 26O
00' IO' 20' 30' 40' 50'
0.4538 04567 0.4596 04625 0.4654 04683
0.4384 04410 0.4436 04462 04488 04514
9.6418 9.6444 9.6470 9.6495 9.6521 9.6546
0.8988 0.8975 0.8962 0 8949 0.8936 0.8923
9.9537 9.9530 9.9524 9.9518 9.9512 9.9505
04877 0.4913 0.4950 0 4986 0.5022 0 5059
9.6882 9.6914 9.6946 9.6977 9.7009 9.7040
2.0503 2.0353 2.0204 2.0057 1.9912 1.9768
0.3118 0.3086 0.3054 0.3023 0.2991 0.2960
1.1170 1.1141 1.1112 1.1083 1.1054 1.1025
64O 64O 64" 64O 64O 64O
00' 50' 40' 30' 20' 10'
270 27' 270 27" 27O 27O
00' 10' 20' 30' 40' 50'
0.4712 0.4741 0.4771 0.4800 0.4829 0.4858
04540 04566 0 4592 0.4617 0.4643 0 4669
9.6570 9.6595 9.6620 9.6644 9.6668 9.6692
0.8910 0.8897 0.8884 0.8870 0.8857 0.8843
0.9499 9.9492 9.9486 9.9479 9.9473 9.9466
0 5095 0.5132 05169 05206 0.5243 0.5280
9.7072 9.7103 9.7134 9.7165 9.7196 9.7226
1.9626 1.9486 1.9347 1.9210 1.9074 1.8940
0.2928 0.2897 0.2866 0.2835 0.2804 0.2774
1.0996 1.0966 1.0937 1.0908 1.0879 1.0850
63O 00' 63O 50' 63O 40' 63O 30' 63'=20' 63O IO'
280 280 28" 28O 28O 28O
00' 10' 20' 30' 40' 50'
04887 0.4916 0.4945 0.4974 0.5003 05032
0 4695 04720 04746 0.4772 0 4797 0.4823
9.6716 9.6740 9.6763 9.6787 9.6810 9.6833
0.8829 0.8816 0.8802 0.8788 0.8774 0.8760
9.9459 9.9453 9.9446 9.9439 9.9432 9 9425
0.5317 0.5354 0.5392 0 5430 0.5467 0.5505
9.7257 9.7287 9.7317 9.7348 9.7378 9.7408
1.8807 1.8676 1.8546 1.8418 1.8291 1.8165
0.2743 0.2713 0.2683 0.2652 0.2622 0.2592
1.0821 1.0792 1.0763 1.0734 1.0705 1.0676
62O 00' 62'=50' 62O 40' 62O 30' 62O 20' 62O 10'
290 290 290 290 290 290
00' 10' 20' 30' 40' 50'
05061 0.5091 0.5120 05149 0.5178 0.5207
04848 04874 0.4899 0.4924 0.4950 0.4975
9.6856 9.6878 9.6901 9.6923 9.6946 9.6968
0.8746 0 8732 0.8718 0.8704 0.8689 0.8675
9.9418 9.9411 9.9404 9.9397 9.9390 9.9383
0.5543 0.5581 0.5619 0.5658 0.5696 0.5735
9.7438 9.7467 9.7497 9.7526 9.7556 9.7585
1.8040 1.7917 1.7796 1.7675 1.7556 1.7437
0.2562 0.2533 0.2503 0.2474 0.2444 0.2415
1.0647 1.0617 1.0588 1.0559 1.0530 1.0501
61° 00' 61° 50' 61' 40' 61° 30' 61'=20' 61° 10'
Natural
Log"
Natural
Log'*
Natural
Log* *
Natural
Radians
Degrees
Cosines
‘For 0” 1 intervals. see Tables 1 21 “Add 10 I” these columns
1.22. and I 23
Sines
Cotangents
Log"
Tangents
MATHEMATlCALTABLES&
TABLE
UNlTS&SYSTEMSOFWElGHTS
1.24-TRIGONOMETRIC Sines
& MEASURES
FUNCTIONS Comes
(AT INTERVALS Tangents
Cotangents Log"
9.7614 9.7644 9.7673 9.7701 9.7730 9.7759
1.7321 1.7205 1.7090 1.6977 1.6864 1.6753
0.2386 0.2356 0.2327 0.2299 0.2270 0.2241
1.0472 1.0443 1.0414 1.0385 1.0356 1.0327
60a 60° 60° 60° 60° 60'
00' 50' 40' 30' 20' 10'
0.6009 0.6048 0.6088 0.6128 0.6168 0.6208
9.7788 9.7816 9.7845 9.7873 9.7902 9.7930
1.6643 1.6534 1.6426 1.6319 1.6212 1.6107
0.2212 0.2184 0.2155 0.2127 0.2098 0.2070
1.0297 1.0268 1.0239 1.0210 1.0181 1.0152
590 590 59" 590 590 590
00' 50' 40' 30' 20' 10'
9.9284 9.9276 9.9268 9.9260 9.9252 9.9244
0.6249 0.6289 0.6330 0.6371 0.6412 0.6453
9.7958 9.7986 9.8014 9.8042 9.8070 9.8097
1.6003 1.5900 1.5798 1.5697 1.5597 1.5497
0.2042 0.2014 0.1986 0.1958 0.1930 0.1903
1.0123 .I.0094 1.0065 1.0036 1.0007 0.9977
58O 58" 58O 58' 58O 58'
00' 50' 40' 30' 20' IO'
0.8387 0.8371 0.8355 0.8339 0.8323 0.8307
9.9236 9.9228 9.9219 9.9211 9.9203 9.9194
0.6494 0.6536 0.6577 0.6619 0.6661 0.6703
9.8125 9.8153 9.8180 9.8208 9.8235 9.8263
1.5399 1.5301 1.5204 1.5108 1.5013 1.4919
0.1875 0.1847 0.1820 0.1792 0.1765 0.1737
0.9948 0.9919 0.9890 0.9861 0.9832 0.9803
57" 570 570 570 570 570
00' 50' 40' 30' 20' IO'
9.7476 9.7494 9.7513 9.7531 9.7550 9.7568
0.8290 0.8274 0.8258 0.8241 0.8225 0.8208
9.9186 9.9177 9.9169 9.9160 9.9151 9.9142
0.6745 0.6787 0.6830 0.6873 0.6916 0.6959
9.8290 9.8317 9.8344 9.8371 9.8398 9.8425
1.4826 1.4733 1.4641 1.4550 1.4460 1.4370
0.1710 0.1683 0.1656 0.1629 0.1602 0.1575
0.9774 0.9745 0.9716 0.9687 0.9657 0.9628
56O 00' 56O 50' 56'=40' 56O 30' 56" 20' 56O IO'
0.5736 0.5760 0.5783 0.5807 0.5831 0.5854
9.7586 9.7604 9.7622 9.7640 9.7657 9.7675
0.8192 0.8175 0.8158 0.8141 0.8124 0.8107
9.9134 9.9125 9.9116 9.9107 9.9098 9.9089
0.7002 0.7046 0.7089 0.7133 0.7177 0.7221
9.8452 9.8479 9.8506 0.8533 9.8559 9.8586
1.4281 1.4193 1.4106 1.4019 1.3934 1.3848
0.1548 0.1521 0.1494 0.1467 0.1441 0.1414
0.9599 0.9570 0.9541 0.9512 0.9483 0.9454
559 550 550 550 550 550
00' 50' 40' 30' 20' 10'
0.6283 0.6312 0.6341 0.6370 0.6400 0.6429
0.5878 0.5901 0.5925 0.5948 0.5972 0.5995
9.7692 9.7710 9.7727 9.7744 9.7761 9.7778
0.8090 0.8073 0.8056 0.8039 0.8021 0.8004
9.9080 9.9070 9.9061 9.9052 9.9042 9.9033
0.7265 0.7310 0.7355 0.7400 0.7445 0.7490
9.8613 9.8639 9.8666 9.8692 9.8718 9.8745
1.3764 1.3680 1.3597 1.3514 1.3432 1.3351
0.1387 0.1361 0.1334 0.1308 0.1282 0.1255
0.9425 0.9396 0.9367 0.9338 0.9308 0.9279
540 540 540 540 54" 540
00' 50' 40' 30' 20' 10'
00' 10' 20' 30' 40' 50'
0.6458 0.6487 0.6516 0.6545 0.6574 0.6603
0.6018 0.6041 0.6065 0.6088 0.6111 0.6134
9.7795 9.7811 9.7828 9.7844 9.7861 9.7877
0.7986 0.7969 0.7951 0.7934 0.7916 0.7898
9.9023 9.9014 9.9004 9.8995 9.8985 9.8975
0.7536 0.7581 0.7627 0.7673 0.7720 0.7766
9.8771 9.8797 9.8824 9.8850 9.8876 9.8902
1.3270 1.3190 1.3111 1.3032 1.2954 1.2876
0.1229 0.1203 0.1176 0.1150 0.1124 0.1098
0.9250 0.9221 0.9192 0.9163 0.9134 0.9105
530 530 530 53" 530 53"
00' 50' 40' 30' 20' 10'
38O 38O 38O 38O 38O 38O
00' IO' 20' 30' 40' 50'
0.6632 0.6661 0.6690 0.6720 0.6749 0.6778
0.6157 0.6180 0.6202 0.6225 0.6248 0.6271
9.7893 9.7910 9.7926 9.7941 9.7957 9.7973
0.7880 0.7862 0.7844 0.7826 0.7808 0.7790
9.8965 9.8955 9.8945 9.8935 9.8925 9.8915
0.7813 0.7860 0.7907 0.7954 0.8002 0.8050
9.8928 9.8954 9.8980 9.9006 9.9032 9.9058
1.2799 1.2723 1.2647 1.2572 1.2497 1.2423
0.1072 0.1046 0.1020 0.0994 0.0968 0.0942
0.9076 0.9047 0.9018 0.8988 0.8959 0.8930
52O 52O 52' 52O 52" 52O
00' 50' 40' 30' 20' 10'
390 390 39" 390 390 390
00’ 10' 20' 30' 40' 50'
0.6807 0.6836 0.6865 0.6894 0.6923 0.6952
0.6293 0.6316 0.6338 0.6361 0.6383 0.6406
9.7989 9.8004 9.8020 9.8035 9.8050 9.8066
0.7771 0.7753 0.7735 0.7716 0.7698 0.7679
9.8905 9.8895 9.8884 9.8874 9.8864 9.8853
0.8098 0.8146 0.8195 0.8243 0.8292 0.8342
9.9084 9.9110 9.9135 9.9161 9.9187 9.9212
1.2349 1.2276 1.2203 1.2131 1.2059 1.1988
0.0916 0.0890 0.0865 0.0839 0.0813 0.0788
0.8901 0.8872 0.8843 0.8814 0.8785 0.8756
510 51" 510 510 51" 510
00' 50' 40' 30' 20' IO'
Natural
Log"' Radians
Degrees
Log"
Natural
00' 10' 20' 30' 40' 50'
0.5236 0.5265 0.5294 0.5323 0.5352 0.5381
0.5000 0.5025 0.5050 0.5075 0.5100 0.5125
9.6990 9.7012 9.7033 9.7055 9.7076 9.7097
0.8660 0.8646 0.8631 0.8616 0.8601 0.8587
9.9375 9.9368 9.9361 9.9353 9.9346 9.9338
0.5774 0.5812 0.5851 0.5890 0.5930 0.5969
310 00' 310 IO' 31" 20' 31'130' 31" 40' 310 50'
0.5411 0.5440 0.5469 0.5498 0.5527 0.5556
0.5150 0.5175 0.5200 0.5225 0.5250 0.5275
9.7118 9.7139 9.7160 9.7181 9.7201 9.7222
08572 0.8557 0.8542 0.8526 0.8511 0.8496
9.9331 9.9323 9.9315 9.9308 9.9300 9.9292
32O 32" 32O 32" 32O 32'
00' 10' 20' 30' 40' 50'
0.5585 0.5614 0.5643 0.5672 0.5701 0.5730
0.5299 0.5324 0.5348 0.5373 0.5398 0.5422
9.7742 9.7262 9.7282 9.7302 9.7322 9.7342
0.8480 0.8465 0 8450 0.8434 0 8418 0.8403
330 330 33" 339 330 330
00' 10' 20' 30' 40' 50'
0.5760 0.5789 0.5818 0.5847 0.5876 0.5905
0.5446 0.5471 0.5495 0.5519 0.5544 0.5568
9.7361 9.7380 9.7400 9.7419 9.7438 9.7457
340 34" 340 340 340 340
00' 10' 20' 30' 40' 50'
0.5934 0.5963 0.5992 0.6021 0.6050 0.6080
0.5592 0.5616 0.5640 0.5664 0.5688 0.5712
350 350 350 350 350 35"
00' IO' 20' 30' 40' 50'
0.6109 0.6138 0.6167 0.6196 0.6225 0.6254
36" 36O 36' 36O 36" 36O
00' IO' 20' 30' 40' 50'
370 37" 370 370 370 370
300 30" 300 30" 300 300
Natural
Log"
Natural
Radians
Log*'
Cosines
Natural Smes
Log**
Natural
Log*'
OF 10')' (continued)
Natural
Degrees
Natural
1-53
Log"'
Cotangents
Tangents
(contmued
on next page)
PETROLEUM
l-54
TABLE
1.24-TRIGONOMETRIC
FUNCTIONS(AT
Sines Degrees
Radtans
Natural
Log**
INTERVALS Tangents
Natural
Log"
Natural
ENGINEERING
HANDBOOK
OF 10')' (continued) Cotangents
Log**
Natural
Log*'
400 400 400 400 400 400
00' 10' 20' 30' 40' 50'
0.6981 0.7010 0.7039 0.7069 0.7098 0.7127
0.6428 0.6450 0.6472 0.6494 0.6517 0.6539
9.8081 9.8096 9.8111 9.8125 9.8140 9.8155
0.7660 07642 0.7623 0.7604 0.7585 0.7566
9.8843 9.8832 9.8821 9.8810 9.8800 9.8789
0.8391 0.8441 0.8491 0.8541 0.8591 0.8642
9.9238 9.9264 9.9289 9.9315 9.9341 9.9366
1.1918 1.1847 1.1778 1.1708 1.1640 1.1571
0.0762 0.0736 00711 0.0685 0.0659 0.0634
0.8727 0.8698 0.8668 0.8639 0.8610 0.8581
500 50" 500 50" 500 500
00' 50' 40' 30' 20' 10'
410 410 41" 410 410 410
00' 10' 20' 30' 40' 50'
0.7156 0.7185 0.7214 0.7243 0.7272 0.7301
0.6561 0.6583 0.6604 0.6626 0.6648 0.6670
9.8169 9.8184 9.8198 9.8213 9.8227 9.8241
0.7547 07528 0.7509 0 7490 0.7470 074.51
9.8778 9.8767 9.8756 9.8745 9.8733 9.8722
0.8693 0.8744 0.8796 0.8847 0.8899 0 8952
9.9392 9.9417 9.9443 9.9468 9.9494 9.9519
1.1504 1.1436 1.1369 1.1303 1.1237 1.1171
0.0608 0.0583 0.0557 0.0532 0.0506 0.0481
0.8552 0.8523 0.8494 0.8465 0.8436 0.8407
490 490 49" 490 49" 490
00' 50' 40' 30' 20' 10'
42O 42' 42O 42O 42O 420
00' IO' 20' 30' 40' 50'
0.7330 0.7359 0.7389 0.7418 0.7447 0.7476
0.6691 0.6713 0.6734 0.6756 0.6777 0.6799
9.8255 9.8269 9.8283 9.8297 9.8311 9.8324
0 7431 07412 0.7392 0.7373 0.7353 0.7333
9.8711 9.8699 9.8688 9.8676 9.8665 9.8653
0.9004 0.9057 0.9110 0.9163 0.9217 0.9271
9.9544 9.9570 9.9595 9.9621 9.9646 9.9671
1.1106 1.1041 1.0977 1.0913 1.0850 1.0786
00456 0.0430 00405 0.0379 0.0354 0.0329
0.8378 0.8348 0.8319 0.8290 0.8261 0.8232
48O 48" 48O 480 48O 48"
00' 50' 40' 30' 20' IO'
430 430 430 430 430 43"
00' 10' 20' 30' 40' 50'
0.7505 0.7534 0.7563 0.7592 0.7621 0.7650
0.6820 0.6841 0.6862 0.6884 0.6905 0.6926
9.8338 9.8351 9.8365 9.8378 9.8391 9.8405
0.7314 0.7294 0.7274 0.7254 0.7234 07214
9.8641 9.8629 9.8618 9.8606 9.8594 9.8582
0.9325 0.9380 0.9435 0.9490 0.9545 0.9601
9.9697 9.9722 9.9747 9.9772 9.9798 9.9823
1.0724 1.0661 1.0599 1.0538 1.0477 1.0416
0.0303 0.0278 0.0253 0.0228 0.0202 0.0177
0.8203 0.8174 0.8145 0.8116 0.8087 0.8058
47" 470 470 470 470 470
00' 50' 40' 30' 20' IO'
44" 440 44" 440 44" 440
DO' IO' 20' 30' 40' 50'
0.7679 0.7709 0.7738 0.7767 0.7796 0.7825
0.6947 0.6967 0.6988 0.7009 0.7030 0.7050
9.8418 9.8431 9.8444 9.8457 9.8469 9.8482
0.7193 0.7173 0.7153 0.7133 0.7112 0.7092
9.8569 9.8557 9.8545 9.8532 9.8520 9.8507
0.9657 0.9713 0.9770 0.9827 0.9884 0.9942
9.9848 9.9874 9.9899 9.9924 9.9949 9.9975
1.0355 1.0295 1.0235 1.0176 1.0117 1.0058
0.0152 0.0126 0.0101 0.0076 0.0051 0.0025
0.8029 0.7999 0.7970 0.7941 0.7912 0.7883
46O 46O 46' 46O 46' 46O
00' 50' 40' 30' 20' IO'
450 00'
0.7854
0.7071
9.8495
0.7071
9.8495
1.0000
0.0000
1 .oooo
0.0000
0.7854
450 00'
Natural
Loq"
Natural
LOCI"
Natural
Log'*
Natural
Radians
Degrees
Sines
Cotangents
Log"
Tangents
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
TABLE
*
”
e’
0.00 0 01
1000
1010
0.02
1020
003
1030
0 04
1041
005
1051
0 06
1062
007
1073
0 08
1083
0 09
1094
0.10
1 105
0 11
1116
0 12
1127
0 13
1139
014
1150
0 15 0 16
1 162 1 174
017
i 185
0 18
1197
0 19
1209
0.20
1221
0 21
1234
0 22
1 246
023
1259
0 24
1.271
025
1284
0 26
1 297
027
1310
028 0 29
1323 1 336
0.30
1.350
0 31
1.363
032
1377
0 33
1391
034
1405
035
1419
0 36
1433
0 37
i 448
0.38
1 462
0 39
1477
0.40
1492
0 41
1 507
042 043
1522 1537
044
1553
0 45 0 46
1 568 i 584
047
1600
048
1616
049
1632
0.50
1649
Dlllerence 10 10 10 11 10 11 11 10 11 11 11 11 12 11 12 12 11 12 12 12 13 12 13 12 13 13 13 13 13 14 13 14 14 14 14 14 15 14 15 14 15 15 15 16 15 16 16 16 16 17
n
e’
0.50
1649
051
0 52
1 665 1682
0 53
1699
0 54
1716
0 55
1733
0 56
1751
0 57
1 768
0 58
1786
0 59
1804
0.60
1822
061
1840
0 62
1859
0 63
i a78
064
1896
0 65 066
1916 1935
067
1954
0 68
1974
0 69
1994
0.70
2 014
0 71
2034
0 72
2054
0 73
0 74
075 2 096
0 75
2 117
0 76
2 138
0 77
2 160
0 78 0 79
2181 2203
0.80
2226
081
2248
082
2
0 83 0 64
2
270 2 293 2 316
085
2340
0 86
2363
087
2 387
088
2411
0 89
2 435
0.90
2460
091
2484
0 92 0 93
2 509 2535
0 94
2560
0 95 0 96
2 586 2612
0 97
2638
0 98
2664
0 99
2691
1.00
2718
OF WEIGHTS
1.25-EXPONENTIALS
Otfferenc~ 16 17 17 17 17 18 17 18 18 18 18 19 19 18 20 19 19 20 20 20 20 20 21 21 21 21 22 21 22 23 22 22 23 23 24 23 24 24 24 25 24 25 26 25 26 26 26 26 27 27
& MEASURES
(e” and em”)’
e
”
I-55
”
e
1.0
2 718'
0.00
1000
11
3 004 3 320
0 01 002
0 990 0980
12 13
3669
003
0970
14
4055
0 04
0 961
15
4 482
005
0951
16
4 953
0 06
0.942
5 474
007
0932
18
6050
0 08
0 923
19
6 686
009
0914
2.0
7389
0.10
0 905
21
8 166
0 11
0 896
22
9025
012
0887
23
9 974
013
0878
1
7
D~iierence _n - I” -10 -10 9 -10
-10
0 J
n
I ; -
9
-
9 n 3
-
9
-
9
-
8
r>
e
n
e
0.50
0 607
1.0
0368"
051 052
0600 0595
11 12
0333 0301
053
0 589
13
0213
054
0583
14
0247
055
0577
15
0223
0 56
0 571
16
0202
057
0566
17
0183
058
0560
18
0165
059
0554
19
0150
0.60
0 549
2.0
0135
061
0543
21
0122
062
0538
22
0111
063
0533
23
0100
064
0 527
24
00907
24
11 02
014
0869
25 26
1218
015
0861
25
00821
1346
016
0852
26
00743
27
017
0844
27
00672
28
1488 1644
018
0835
28
00608
29
1817
019
0827
29
00550
3.0
20 09
0.20
0 819
3.0
0 0498
31
2220
0 21
0 811
31
00450
32
24 53
022
0803
32
00408
33
27 11
023
0795
33
0 0369
34
2996
0 24
0 787
34
00334
35
3312
025
0779
35
00302
36
3660
026
0771
36
00273
37
4045
027
0763
37
00247
38 39
44 70 4940
028 029
0756 0748
38 39
00224
4.0
5460
0.30
0 741
41
60 34
0 31
0 733
42
6669
032
0726
43
7370
033
0719
44
81 45
034
45
9002
0 449
4.0
00183
081
0445
4 1
00166
082
0440
42
00150
083 084
0436 0432
4.3 44
00136
0712
- 7 -7
035
0705
-7
085
0427
45
00111
036
0698
086
0423
087
0419
5.0
000674
088
0415
60
000248
089
0411
70
0000912
0.90
0 407
8 0
0000335
091
0403
90
0.000123
092 093
0399 0 395
10.0
0000045
094
0391
095 096
0387 0383
097 098
5.0
1484
037
0691
60
4034
038
0684
70
1097
0 39
0 677
80
2.981
0.40
0 670
90
8 103
0 41
0 664
042 043
0657 0651
044
0644
111 3
045
0638
5355
046
0631
10.0 ;I2 2si2 3r/2 4ri2
22 026 4 810
-
7
-
7
-7
5ii2
2.576 0
047
0625
12.392 0
048
0619
7~12
59.610 0
049
0613
0.50
0 607
286.751
0
7
-
7
-
7
-
6 _
I
-
6
-
7 6
23 14
6ri2 7112
00202
0.80
-8
-
7
-
6 ^
1;
^ b
r;/2
00123
0 208
2712
00432
3~12 4~12
000898 000187
0379
5~12
0000388
0375
6ni2
0000081
099
0372
7~12
0000017
l.oo
0368
8~12
0000003
*e=pjy828, I,~=o.s~~Ts, lag,,e=04343. l/(04343)=2.3026.log,,(O4343)=1.6378. log,,e"=n(O4343). For tablesof multiples of 0.4343,see Table 1 30 "Do not ~nterpcdate m thiscolumn
PETROLEUM
l-56
TABLE
1.26-NATUI
"
n(2 3026)
n(0.6974-3)
1 2 3 4 5 6 7 8 9
2.3026 4.6052 6.9078 9.2103 11.5129 13.8155 16.1181 18.4207 20.7233
0 6974-3 0 3948-5 0.0922 -7 0.7897-10 0.4871-12 0.1845-14 0.8819-17 0.5793-19 0 2767-21
ENGINEERING
HANDBOOK
RALLOGARITHMS'
Average Difference
0
1
2
3
4
5
6
7
8
9
1.0 1.1 1.2 1.3 1.4
0.0000 0.0953 0.1823 0.2624 0.3365
0.0100 01044 0.1906 02700 0.3436
0.0198 0.1133 0.1989 0.2776 0.3507
0.0296 01222 0.2070 0.2852 0.3577
0.0392 01310 0.2151 0.2927 0.3646
0.0488 01398 0.2231 0.3001 0.3716
0.0583 0.1484 0.2311 0.3075 0.3784
0.0677 0.1570 0.2390 0.3148 0.3853
0.0770 0.1655 0.2469 0.3221 0.3920
0.0862 0.1740 0.2546 0.3293 0.3988
95 87 80 74 69
1.5 1.6 1.7 1.8 1.9
0.4055 0.4700 0.5306 0.5878 0.6419
0.4121 0.4762 0.5365 0.5933 0.6471
0.4187 0.4824 0.5423 0.5988 0.6523
0.4253 0.4886 0.5481 0.6043 06575
0.4318 0.4947 0.5539 0.6098 0.6627
0.4383 0.5008 0.5596 0.6152 0.6678
0.4447 0.5068 0.5653 0.6206 0.6729
0.4511 0.5128 0.5710 0.6259 0.6780
0.4574 0.5188 0.5766 0.6313 0.6831
0.4637 0.5247 0.5822 0.6366 0.6881
65 61 57 54 51
2.0 2.1 2.2 2.3 2.4
0.6931 0.7419 0.7885 0.8329 0.8755
0.6981 0.7467 0.7930 0.8372 0.8796
0.7031 0.7514 0.7975 0.8416 0.8838
07080 0.7561 0.8020 0.8459 0.8879
0.7129 0.7608 0.8065 0.8502 0.8920
0.7178 07655 0.8109 0.8544 0.8961
0.7227 0.7701 0.8154 0.8587 0.9002
0.7275 0.7747 0.8198 0.8629 0.9042
0.7324 0.7793 0.8242 0.8671 0.9083
0.7372 0 7839 0.8286 0.8713 0.9123
49 47 44 43 41
2.5 2.6 2.7 2.8 2.9
0.9163 0.9555 0.9933 1.0296 1.0647
0.9203 0.9594 0.9969 1.0332 1.0682
0.9243 0.9632 1.0006 1.0367 1.0716
0.9282 0.9670 1.0043 1.0403 1.0750
0.9322 0.9708 1.0080 1.0438 1.0784
0.9361 0.9746 1.0116 1.0473 1.0818
0.9400 0.9783 1.0152 1.0508 1.0852
0.9439 0.9821 1.0188 1.0543 1.0886
0.9478 0.9858 1.0225 1.0578 1.0919
09517 0 9895 1.0260 10613 1.0953
39 38 36 35 34
3.0 3.1 3.2 3.3 3.4
1.0986 1.1314 1.1632 1.1939 1.2238
1.1019 1.1346 1.1663 1 .I969 1.2267
1.1053 1.1378 1.1694 1.2000 1.2296
1.1086 1.1410 1.1725 1.2030 1.2326
1.1119 1.1442 1.1756 1.2060 1.2355
1.1151 1.1474 1.1787 1.2090 1.2384
1.1184 1.1506 1.1817 1.2119 1.2413
1.1217 1.1537 1.1848 1.2149 1.2442
1 .I249 1.1569 1.1878 1.2179 1.2470
1.1282 1 1600 1.1909 1.2208 1.2499
33 32 31 30 29
3.5 3.6 3.7 3.8 3.9
1.2528 1.2809 1.3083 1.3350 13610
1.2556 1.2837 13110 1.3376 13635
1.2585 1.2865 1.3137 1.3403 1.3661
1.2613 1.2892 13164 1.3429 13686
1.2641 1.2920 1.3191 1.3455 1.3712
1.2669 1.2947 13218 1.3481 13737
1.2698 1.2975 1.3244 1.3507 1.3762
1.2726 1.3002 1.3271 1.3533 1.3788
1.2754 1.3029 1.3297 1.3558 1.3813
1.2782 1.3056 1.3324 1.3584 1.3838
28 27 27 26 25
4.0 4.1 4.2 4.3 4.4
1.3863 1.4110 1.4351 1.4586 1.4816
1.3888 1.4134 1.4375 1.4609 1.4839
1.3913 1.4159 1.4398 1.4633 1.4861
13938 1.4183 1.4422 1.4656 1.4884
1.3962 1.4207 1.4446 1.4679 1.4907
13987 1.4231 1.4469 1.4702 1.4929
1.4012 1.4255 1.4493 1.4725 1.4951
1.4036 1.4279 1.4516 1.4748 1.4974
1.4061 1.4303 1.4540 1.4770 1.4996
1.4085 1.4327 14563 1.4793 15019
25 24 23 23 22
4.5 4.6 4.7 4.8 4.9
1.5041 1.5261 1.5476 1.5686 1.5892
1.5063 1.5282 1.5497 1.5707 1.5913
1.5085 1.5304 1.5518 1.5728 1.5933
1.5107 1.5326 1.5539 1.5748 15953
1.5129 1.5347 1.5560 1.5769 1.5974
1.5151 1.5369 1.5581 1.5790 1.5994
1.5173 1.5390 1.5602 1.5810 1.6014
1.5195 1.5412 1.5623 1.5831 1.6034
1.5217 1.5433 1.5644 1.5851 1.6054
15239 1.5454 1.5665 1.5872 1.6074
22
5.0 5.1 5.2 5.3 5.4
1.6094 1.6292 1.6487 1.6677 1.6864
1.6114 1.6312 1.6506 1.6696 1.6882
1.6134 1.6332 1.6525 1.6715 1.6901
1.6154 1.6351 1.6544 1.6734 1.6919
1.6174 1.6371 1.6563 1.6752 1.6938
1.6194 1.6390 1.6582 1.6771 1.6956
1.6214 1.6409 1.6601 1.6790 1.6974
1.6233 1.6429 1.6620 1.6808 1.6993
1.6253 1.6448 1.6639 1.6827 1.7011
1.6273 1.6467 1.6658 1.6845 1.7029
20 19 19 18 18
Number
;1 20 20
This table gives the naturalor Napierian logarithms(In)of numbers between 1 and 10, correctto four places. Moving the decimal pointn places to the right(or left) in the number isequivalentto adding R times 2 3026 (orn times 3.6974) to the logarithm.Base e=2.71828+. ‘,nw=(2.3026,,og,,x,
,og,,x=(O4343),nx,
whete23026=ln
10 andO4343=log,:e
MATHEMATlCALTABLES&UNlTS&
TABLE
1.26 -NATURAL n
LOGARITHMS'
(continued)
nf2.30261
n(0.6974-31
2.3026 4.6052 6.9078 9.2103 11.5129 13.8155 16.1181 18.4207 20.7233
0.6974-3 0.3948-5 0.0922- 7 0.7897-10 0.4871-12 0.1845-14 0.8819-17 0.5793-19 0.2767-21
1
2
3
4
5
6
7
9
Average Difference
5.5 5.6 5.7 5.8 5.9
1.7047 1.7228 1.7405 1.7579 1.7750
1.7066 1.7246 1.7422 1.7596 1.7766
1.7084 1.7263 1.7440 1.7613 1.7783
1.7102 1.7281 1.7457 1.7630 1.7800
1.7120 1.7299 1.7475 1.7647 1.7817
1.7138 1.7317 1.7492 1.7664 1.7834
1.7156 1.7334 1.7509 1.7681 1.7851
1.7174 1.7352 1.7527 1.7699 1.7867
8 ____ 1.7192 1.7370 1.7544 1.7716 1.7884
6.0 6.1 6.2 6.3 6.4
1.7918 1.8083 1.8245 1.8405 1.8563
1.7934 1.8099 1.8262 1.8421 1.8579
1.7951 1.8116 1.8278 1.8437 1.8594
1.7967 1.8132 1.8294 1.8453 1.8610
1.7984 1.8148 1.8310 1.8469 1.8625
1.8001 1.8165 1.8326 1.8485 1.8641
1.8017 1.8181 1.8342 1.8500 1.8656
1.8034 1.8197 1.8358 1.8516 1.8672
1.8050 1.8213 1.8374 1.8532 1.8687
1.8066 1.8229 1.8390 1.8547 1.8703
16 16 16 16 15
6.5 6.6 6.7 6.8 6.9
1.8718 1.8871 1.9021 1.9169 1.9315
1.8733 1.8886 1.9036 1.9184 1.9330
1.8749 1.8901 1.9051 1.9199 1.9344
1.8764 1.8916 1.9066 1.9213 1.9359
1.8779 1.8931 1.9081 1.9228 1.9373
1.8795 1.8946 1.9095 1.9242 1.9387
1.8810 1.8961 1.9110 1.9257 1.9402
1.8825 1.8976 1.9125 1.9272 1.9416
1.8840 1.8991 1.9140 1.9286 1.9430
1.8856 1.9006 1.9155 1.9301 1.9445
15 15 15 15 14
7.0 7.1 7.2 7.3 7.4
1.9459 1.9601 1.9741 1.9879 2.0015
1.9473 1.9615 1.9755 1.9892 2.0028
1.9488 1.9629 1.9769 1.9906 2.0042
1.9502 1.9643 1.9782 1.9920 20055
1.9516 1.9657 1.9796 1.9933 2.0069
1.9530 1.9671 1.9810 1.9947 2.0082
1.9544 1.9685 1.9824 1.9961 2.0096
1.9559 1.9699 19838 1.9974 20109
1.9573 1.9713 1.9851 1.9988 2.0122
1.9587 1.9727 1 9865 2.0001 2.0136
14 14 14 13 13
7.5 7.6 77 78 79
2.0149 2.0281 2.0412 2.0541 2.0669
2.0162 2.0295 2.0425 2.0554 2.0681
2.0176 2.0308 2.0438 2.0567 2.0694
2.0189 2.0321 2.0451 2.0580 2.0707
2.0202 2.0334 2.0464 2.0592 2.0719
2.0215 2.0347 2.0477 2.0605 2.0732
2.0229 2.0360 2.0490 2.0618 2.0744
20242 2.0373 2.0503 2.0631 2.0757
2.0255 2.0386 2.0516 2.0643 2.0769
2.0268 2.0399 2.0528 2.0656 2.0782
13 13 13 13 12
8.0 8.1 8.2 8.3 8.4
2.0794 2.0919 2.1041 2.1163 2.1282
2.0807 2.0931 2.1054 2.1175 2.1294
2.0819 2.0943 2.1066 2.1187 2.1306
2.0832 2.0956 2.1078 2.1199 2.1318
2.0844 2.0966 2.1090 2.1211 2.1330
2.0857 2.0980 2.1102 2.1223 2.1342
2.0869 2.0992 2.1114 2.1235 2.1353
2.0882 2.1005 2.1126 2.1247 2.1365
2.0894 2.1017 2.1138 2.1258 2.1377
2.0906 2.1029 2.1150 2.1270 2.1389
12 12 12 12 12
8.5 8.6 8.7 8.8 8.9
2.1401 2.1518 2.1633 2.1748 2.1861
2.1412 2.1529 2.1645 2.1759 2.1872
2.1424 2.1541 2.1656 2.1770 2.1883
2.1436 2.1552 2.1668 2.1782 2.1894
2.1448 2.1564 2.1679 2.1793 2.1905
2.1459 2.1576 2.1691 2.1804 2.1917
2.1471 2.1587 2.1702 2.1815 2.1928
2.1483 2.1599 2.1713 2.1827 2.1939
2.1494 2.1610 2.1725 2.1838 2.1950
2.1506 2.1622 2.1736 2.1849 2.1961
12 12 11 11 11
9.0 9.1 9.2 9.3 9.4
2.1972 2.2083 2.2192 2.2300 2.2407
2.1983 2.2094 2.2203 2.2311 2.2418
2.1994 2.2105 2.2214 2.2322 2.2428
2.2006 2.2116 2.2225 2.2332 2.2439
2.2017 2.2127 2.2235 2.2343 2.2450
2.2028 2.2138 2.2246 2.2354 2.2460
2.2039 2.2148 2.2257 2.2364 2.2471
2.2050 2.2159 2.2268 2.2375 2.2481
2.2061 2.2170 2.2279 2.2386 2.2492
2.2072 2.2181 2.2289 2.2396 2.2502
II 11 11 11 11
9.5 9.6 9.7 9.8 9.9
2.2513 2.2618 2.2721 2.2824 2.2925
2.2523 2.2628 2.2732 2.2834 2.2935
2.2534 2.2638 2.2742 2.2844 2.2946
2.2544 2.2649 2.2752 2.2854 2.2956
2.2555 2.2659 2.2762 2.2865 2.2966
2.2565 2.2670 2.2773 2.2875 2.2976
2.2576 2.2680 2.2783 2.2885 2.2986
2.2586 2.2690 2.2793 2.2895 2.2996
2.2597 2.2701 2.2803 2.2905 2.3006
2.2607 2.2711 2.2814 2.2915 2.3016
IO IO 10 IO 10
10.0
2.3026
Number
0
1-57
SYSTEMSOFWElGHTS&MEASURES
1.7210 1.7387 1.7561 1.7733 1.7901
18 18 17 17 17
Thts table gives the naturalor Naprerian logarithms(In)of numbers between 1 and 10, correctto four places. Moving the decimal porntn places to the right(or left) In the number isequivalentto adding n times 2.3026 (orn times 3.6974) to the logarithm.Base e=2 71828+ -In x=/2
3026) log .>x bg
,,x=(O 4343)ln x. where 2 3026=In
10 and 0 4343=log,,e
PETROLEUM
1-58
TABLE
x
0
1
2
1.27-HYPERBOLIC
3
4
SINES
5
ENGINEERING
HANDBOOK
[sinh x = Xte” -e -“)I’
6
7
8
9
Average Difference
0.0 0.1 0.2 0.3 04
0.0000 0 1002 0.2013 0.3045 0.4108
0.0100 0.1102 0.2115 0.3150 0.4216
0.0200 0.1203 0.2218 0.3255 0.4325
0.0300 0.1304 0.2320 0.3360 0.4434
0.0400 0.1405 0.2423 0.3466 0.4543
0.0500 0.1506 0.2526 0.3572 0.4653
0.0600 0.1607 0.2629 0.3678 0.4764
0.0701 0.1708 0.2733 0.3785 0.4875
0.0801 0.1810 0.2837 0.3892 0.4986
0.0901 0.1911 0.2941 0.4000 0.5098
100 101 103 106 110
0.5 0.6 0.7 0.8 0.9
0.5211 0.6367 0.7586 0.8881 1.027
0.5324 0.6485 0.7712 0.9015 1.041
05438 0.6605 0.7838 0.9150 1055
0.5552 0.6725 0.7966 0.9286 1.070
0.5666 0.6846 0.8094 0.9423 1.085
0.5782 0.6967 0.8223 0.9561 1.099
0.5897 0.7090 0.8353 0.9700 1.114
0.6014 0.7213 0.8484 0.9840 1.129
0.6131 0.7336 0.8615 0.9981 1.145
0.6248 0.7461 0.8748 1.012 1.160
116 122 130 138 15
1 .o 1.1 1.2 1.3 1.4
1.175 1.336 1.509 1.698 1.904
1.191 1.352 1.528 1.718 1.926
1206 1369 1546 1.738 1948
1.222 1.386 1.564 1.758 1.970
1.238 1.403 1.583 1.779 1992
1.254 1.421 1.602 1.799 2.014
1.270 1.438 1.621 1.820 2.037
1.286 1.456 1.640 1.841 2.060
1.303 1.474 1.659 1.862 2.083
1.319 1.491 1.679 1.883 2.106
16 17 19 21 22
1.5 1.6 1.7 1.8 1.9
2.129 2.376 2 646 2 942 3 268
2.153 2401 2.674 2973 3303
2 177 2428 2 703 3.005 3 337
2.201 2.454 2 732 3.037 3372
2.225 2.481 2 761 3069 3.408
2.250 2.507 2.790 3.101 3.443
2.274 2.535 2820 3.134 3479
2.299 2.562 2.850 3.167 3.516
2.324 2.590 2.881 3.200 3.552
2.350 2.617 2.911 3.234 3.589
25 27 30 33 36
2.0 2.1 2.2 2.3 2.4
3 627 4.022 4457 4.937 5.466
3665 4.064 4.503 4.988 5.522
3 703 4.106 4549 5.039 5 578
3741 4.148 4.596 5.090 5.635
3.780 4 191 4643 5.142 5.693
3.820 4.234 4.691 5.195 5.751
3.859 4.278 4739 5.248 5810
3.899 4.322 4.780 5.302 5.869
3.940 4.367 4.837 5.356 5.929
3.981 4.412 4.887 5.411 5.989
39 44 48 53 58
2.5 2.6 2.7 2.8 2.9
6.050 6.695 7.406 8.192 9.060
6.112 6.763 7.481 8.275 9.151
6.174 6.831 7.557 8.359 9.244
6.237 6.901 7.634 8.443 9.337
6.300 6.971 7.711 8.529 9 431
6.365 7.042 7.789 8.615 9.527
6.429 7.113 7.868 8.702 9623
6.495 7.185 7.940 8.790 9.720
6.561 7.258 8.028 8.879 9.819
6.627 7.332 8.110 8.969 9.918
64 71 79 87 96
3.0 3.1 3.2 3.3 3 4
10.02 11.08 12.25 13.54 14.97
10.12 11.19 12.37 13.67 15.12
10.22 11.30 12.49 13 81 15.27
10.32 11.42 12.62 13.95 15.42
10.43 11.53 12.75 14.09 15.58
10.53 1165 12.88 14.23 15.73
1064 11 76 13.01 14.38 15.89
10.75 11.88 13.14 14.52 16.05
10.86 12.00 13.27 14.67 16.21
10.97 12.12 13.40 14.82 1638
11 12 13 14 16
3.5 3.6 3.7 3 8 3.9
16.54 18.29 20.21 22.34 24.69
16.71 18.47 20.41 22.56 24.94
16.88 18.66 20.62 22.79 2519
17.05 18.84 20.83 2302 25.44
17.22 19.03 21.04 23.25 25.70
17.39 19.22 21 25 23.49 25.96
17.57 19.42 21 46 2372 26.22
17.74 19.61 21.68 23.96 26.48
17.92 19.81 21.90 24.20 26.75
18.10 20.01 22.12 24.45 27.02
17 19 21 24 26
4.0 4.1 42 43 4.4
27.29 30.16 33.34 36.84 40.72
27.56 30.47 33.67 37.21 41 13
27.64 30.77 34.01 3759 41.54
28.12 31.08 34.35 37.97 41.96
28.40 31.39 34.70 38.35 42 30
28.69 31.71 35.05 38.73 42.81
28.98 32.03 3540 39.12 43.24
29.27 32.35 35.75 39.52 43.67
29.56 32.68 36.11 39.91 44.11
29.86 33.00 36.48 4031 44.56
29 32 35 39 43
4.5 4 6 4.7 4.8 4.9
45.00 49.74 54.97 60.75 67.14
45.46 50.24 55.52 61.36 67.82
45.91 50.74 5608 61 98 68.50
4637 51.25 56.64 62.60 69.19
46.84 51.77 57.21 63.23 69.88
47.31 52.29 57.79 63.87 70.58
47.79 52.81 58.37 64 51 71 29
48.27 53.34 58.96 65.16 72.01
40.75 53.88 59.55 65.81 72.73
49.24 54.42 60.15 67.47 73.46
47 52 58 64 71
5.0
74.20
MATHEMATIC
:AL TAB1 -ES&UNlTS&SYSTEMSOFWElGHTS&
TABLE
x
0
1
MEASURES
1.28-HYPERBOLIC
2
3
4
COSINES
5
I-59
[cash x,=M(e*
6
+e-“)I’
7
8
9
Average Difference
0.0 01 0.2 0.3 0.4
1.000 1.005 1.020 1.045 1.081
1.000 1.006 1.022 1.048 1.085
1 .ooo 1.007 1.024 1.052 1.090
1.000 1.008 1.027 1.055 1 094
1.0011.010 1.029 1.058 1.098
1.001 1.011 1.031 1.062 1.103
1.002 1.013 1.034 1.066 1.108
1.002 1.014 1.037 1.069 1.112
1.003 1.016 1.039 1.073 1.117
1.004 1.018 1.042 1.077 1.122
0.5 0.6 0.7 0.8 0.9
1.128 1.185 1.255 1.337 1.433
1.133 1.192 1.263 1.346 1.443
1.138 1.198 1.271 1.355 1.454
1.144 1.205 1.278 1.365 1.465
1.149 1.212 1.287 1.374 1.475
1.155 1.219 1.295 1.384 1.486
1.161 1.226 1.303 1.393 1.497
1.167 1.233 1.311 1.403 1.509
1.173 1.240 1.320 1.413 1.520
1.179 1.248 1.329 1.423 1.531
; 10 11
1 .o 1.1 1.2 1.3 1.4
1.543 1.669 1.811 1.971 2.151
1.555 1.682 1.826 1.988 2.170
1.567 1.696 1.841 2.005 2.189
1.579 1.709 1.857 2.023 2.209
1.591 1.723 1.872 2.040 2.229
1.604 1.737 1.888 2.058 2.249
1.616 1.752 1.905 2.076 2.269
1.629 1.766 1.921 2.095 2.290
1.642 1.781 1.937 2.113 2.310
1.655 1.796 1.954 2.132 2.331
13 14 16 18 20
1.5 1.6 1.7 1.8 1.9
2.352 2.577 2.828 3.107 3.418
2 374 2.601 2.855 3.137 3.451
2.395 2.625 2.882 3.167 3.484
2.417 2.650 2.909 3.197 3.517
2.439 2.675 2.936 3.228 3.551
2.462 2.700 2.964 3.259 3.585
2.484 2.725 2.992 3.290 3.620
2.507 2.750 3.021 3.321 3.655
2.530 2.776 3.049 3.353 3.690
2.554 2.802 3.078 3.385 3.726
23 25 28 31 34
2.0 2.1 2.2 2.3 2.4
3.762 4.144 4.568 5.037 5.557
3.799 4.185 4.613 5.087 5.612
3.835 4.226 4.658 5.137 5.667
3.873 4.267 4.704 5.188 5.723
3.910 4.309 4.750 5.239 5.780
3.948 4.351 4.797 5.290 5.837
3.987 4.393 4.844 5.343 5.895
4.026 4.436 4.891 5.395 5.954
4.065 4.480 4.939 5.449 6.013
4.104 4.524 4.988 5.503 6.072
38 42 47 52 58
2.5 2.6 2.7 2.8 2.9
6.132 6.769 7.473 8.253 9.115
6.193 6.836 7.548 8.335 9.206
6.255 6.904 7.623 8.418 9.298
6.317 6.973 7.699 8.502 9.391
6.379 7.042 7.776 8.587 9.484
6.443 7.112 7.853 8.673 9.579
6.507 7.183 7.932 8.759 9.675
6.571 7.255 8.011 8.847 9.772
6.636 7.327 a.091 8.935 9.869
6.702 7.400 a.171 9.024 9.968
64 70 78 86 95
6
3.0 3.1 3.2 3.3 3.4
10.07 11.12 12.29 13.57 15.00
10.17 11.23 12.41 13.71 15.15
10.27 11.35 12.53 13.85 15.30
10.37 11.46 12.66 13.99 15.45
10.48 11.57 12.79 14.13 15.61
10.58 11.69 12.91 14.27 15.77
10.69 11.81 13.04 14.41 15.92
10.79 11.92 13.17 14.56 16.08
10.90 12.04 13.31 14.70 16.25
11.01 12.16 13.44 14.85 16.41
11 12 13 14 16
3.5 3.6 3.7 3.8 3.9
16.57 18.31 20.24 22.36 24.71
16.74 18.50 20.44 22.59 24.96
16.91 18.68 2064 22.81 2521
17.08 18.87 20.85 23.04 25.46
17.25 19.06 21.06 23.27 25.72
17.42 19.25 21.27 23.51 25.98
17.60 19.44 21.49 23.74 26.24
17.77 19.64 21.70 23.98 26.50
17.95 19.84 21.92 24.22 26.77
la.13 20.03 22.14 24.47 27.04
17 19 21 23 26
4.0 4.1 4.2 4.3 4.4
27.31 30.18 33.35 36.86 40.73
27.58 30.48 33.69 37.23 41.14
27.86 30.79 3402 3760 41 55
28.14 31.10 34.37 3798 41.97
28.42 31 41 34 71 3836 4239
28.71 31.72 35.06 38.75 42.82
29.00 3204 3541 39.13 4325
29.29 32.37 35.77 39.53 43.68
29.58 32.69 36.13 39.93 44.12
29.88 33.02 36.49 40.33 44.57
29 32 35 39 43
4.5 4.6 4.7 4.8 4.9
45.01 49.75 54.98 60 76 67.15
45.47 50.25 55.53 61 37 67.82
4592 5075 56.09 61 99 68.50
46.38 51.26 56.65 62.61 69.19
46.85 51 78 57.22 63.24 69 a9
47.32 52.30 57.80 63.87 70.59
4780 5282 58.38 64.52 71.30
48.28 57.35 58.96 65.16 72.02
48.76 57.89 59.56 65.82 72.74
49.25 54.43 60.15 66.48 73.47
47 52 58 64 71
5.0
74.21
I-60
PETROLEUM
TABLE
1.29-HYPERBOLIC
TANGENTS
[tanh x = (e” - e -“)/(e”+ e -“) = sinh xkosh
Average Difference
0.0699 0.1684 0.2636 0.3540 0.4382
0.0798 01781 0.2729 0.3827 0.4462
0.0898 0.1878 0.2821 0.3714 0.4542
100 98 94 89 82
0.5080 0.5784 0.6411 0.6963 0.7443
0.5154 0.5850 0.6469 0.7014 0.7487
05227 0.5915 0.6527 0.7064 0.7531
0.5299 0.5980 0.6584 0.7114 0.7574
75 67 60 52 45
0.7818 0.8178 0.8483 0.8741 0.8957
0.7857 0.8210 0.8511 0.8764 0.8977
0.7895 0.8243 0.8538 0.8787 0.8996
0.7932 0.8275 0.8565 0.8810 0.9015
0.7969 0.8306 0.8591 0.8832 0.9033
39 33 28 24 20
0.9121 0 9275 0.9402 0.9508 0.9595
0.9138 0.9289 0.9414 0.9518 0.9603
0.9154 0.9302 0.9425 0.9527 0.9611
0.9170 0.9316 0.9436 0.9536 0.9619
0.9186 0.9329 0.9447 0.9545 0.9626
0.9202 0.9342 0.9458 0.9554 0.9633
17 14 11 9 8
0.9661 0.9722 0.9771 0.9812 0.9846
0 9668 0.9727 0.9776 0.9816 0 9849
0.9674 0.9732 0.9780 0.9820 0.9852
0.9680 0.9738 0.9785 0.9823 0.9855
0.9687 0.9743 0.9789 0.9827 0.9858
0.9693 0.9748 0.9793 0.9830 0.9861
0.9699 0.9753 0.9797 0.9834 0.9863
0.9871 0.9895 0.9914 0.9929 0.9942
0.9874 0.9897 0.9915 0.9931 0.9943
09876 09899 0.9917 0.9932 0.9944
0.9879 0.9901 0.9919 0.9933 0.9945
0.9881 0.9903 0.9920 0.9935 0.9946
0.9884 0.9905 0.9922 0.9936 0.9947
0.9886 0.9906 0.9923 0.9937 0.9949
0.9888 0.9908 0.9925 0.9938 0.9950
0.9967 0.9996
0.9973 0.9996
0.9978 0.9997
0.9982 0.9998
0.9985 0.9998
0.9988 0.9998
0.9990 0.9999
0.9992 0.9999
4
5
6
0.0100 0.1096 0.2070 0.3004 0.3885
0.0200 0.1194 0.2165 0.3095 0.3969
0.0300 0.1293 0.2260 0.3185 0.4053
0.0400 0.1391 0.2355 03275 04137
0.0500 0.1489 0.2449 0.3364 0.4219
0.0599 0.1587 0.2543 0.3452 0.4301
0.4621 0.5370 0.6044 0.6640 0.7163
0.4700 0.5441 0.6107 0.6696 0.7211
0.4777 0.5511 0.6169 0.6751 0 7259
0.4854 0.5581 0.6231 0.6805 0.7306
0 4930 0.5649 0.6291 0.6858 0.7352
0.5005 0.5717 0.6352 0.6911 0.7398
1.0 1.1 1.2 1.3 1.4
07616 0.8005 0.8337 0.8617 0.8854
0.7658 0.8041 0.8367 0.8643 0.8875
0.7699 0.8076 0.8397 0.8668 0.8896
0.7739 0.8110 0.8426 0.8693 0.8917
0.7779 0.8144 0.8455 0.8717 0.8937
1.5 1.6 1.7 1.8 1.9
0.9052 0.9217 0.9354 0.9468 09562
0.9069 0.9232 0.9367 0.9478 0.9571
0.9087 0.9246 0.9379 0.9488 0.9579
0.9104 0.9261 0.9391 0.9498 0.9587
2.0 2.1 2.2 2.3 2.4
0.9640 0.9705 0 9757 0 9801 0 9837
0.9647 0.9710 0.9762 0.9805 0.9840
0.9654 0.9716 0.9767 0.9809 0.9843
2.5 2.6 2.7 28 2.9
0 9866 0 9890 0 9910 09926 0.9940
0.9869 0.9892 0.9912 0.9928 0.9941
3.0 0.9951 4.0 0.9993 5.0 0.9999
0.9959 0.9995
0.0 0.1 0 2 0.3 0.4
0.0000 0.0997 0.1974 0.2913 0.3800
0.5 0.6 0.7 0.8 0 9
x]
9
3
0
HANDBOOK
a
2
x
ENGINEERING
TABLE
1 JO-MULTIPLES
OF 0.4343 (0.43429448 =
109roe)
2
3
4
5
6
8
9
0.0 1 .o 2.0 3.0 4.0
0.0000 0.4343 0.8686 1.3029 1.7372
0.0434 0.4777 0.9120 1.3463 1.7806
0.0869 0.5212 0.9554 1.3897 1.8240
0.1303 0.5646 0.9989 14332 1.8675
0.1737 0.6080 1.0423 1.4766 1.9109
0.2171 0.6514 1.0857 1.5200 1.9543
0.2606 0.6949 1.1292 1.5635 1.9978
0.3040 0.7383 1.1726 1.6069 2.0412
0.3474 0.7817 1.2160 1.6503 2.0846
0.3909 0.8252 1.2595 1.6937 2.1280
5.0 6.0 70 80 9.0
2.1715 2.6058 3.0401 3.4744 3.9087
2.2149 2.6492 3.0835 3.5178 3.9521
2.2583 2.6926 3.1269 3.5612 3.9955
2.3018 2.7361 3.1703 3.6046 40389
2.3452 2.7795 3.2138 3.6481 4.0824
2.3886 2.8229 3.2572 3.6915 4.1258
2.4320 2.8663 3.3006 3.7349 4.1692
2.4755 2.9098 33441 3.7784 4.2127
2.51a9 2.9532 3.3875 3.8218 4.2561
2.5623 2.9966 3.4309 3.8652 4.2995
TABLE Y
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 90
0 0.0000 23026 4.6052 6.9078 9.2103 11 513 13.816 16.118 18421 20.723
1 0.2303 2.5328 4.8354 7.1380 9.4406 11.743 14046 16.348 18651 20.954
1.31-MULTIPLES 2 0.4605 2.7631 5.0657 7.3683 9.6709 11.973 14.276 16.579 la.881 21.184
3 0.6908 2.9934 5.2959 75985 9 9011 12.204 14.506 16 809 19111 21 414
OF 2.3026 (2.3025851 =In,, = 110.4343) 4
5
6
7
8
9
0.9210 3.2236 5.5262 7.8288 10.131
1.1513 3.4539 5.7565 8.0590 10.362
1.3816 3.6841 59867 8.2893 10.592
1.6118 3.9144 6.2170 8.5196 10.822
1.8421 4.1447 6.4472 8.7498 11.052
2.0723 4.3749 6.6775 8.9801 11 283
12.434 14.737 17039 19342 21.644
12.664 14967 17269 19572 21 875
12.894 15.197 17.500 19.802 22.105
13.125 15.427 17.730 20.032 22.335
13.355 15.658 17.960 20.263 22.565
13585 15.888 18.190 20.493 22.796
MATHEMATlCALTABLES&
TABLE
UNlTS&SYSTEMSOFWElGHTS&
1.32-STANDARD OFRESIDUALS a/r
yin
0.0 0.1 0.2 0.3 0.4
0.000 0.054 0.107 0.160 0.213
0.5 0.6 0.7 0.8 0.9
0264 0.314 0 363 0.411 0 456
1.0 1.1 1.2 1.3 1.4
0.500 0.542 0.582 0.619 0.655
1.5 1.6 1.7 1.8 1.9
0.688 0.719 0748 0.775 0.800
2.0 2.1 2.2 2.3 2.4
0823 0.843 0 862 0.879 0.895
2.5 2.6 2.7 2.8 2.9
0.908 0 921 0.931 0.941 0.950
3.0 3.1 3.2 3.3 3.4
TABLE1.33-FACTORS FORCOMPUTING PROBABLEERROR
DISTRIBUTION
Peters
Bessel
Difference 0.6745
54 53 53 53 51
I-61
MEASURES
n/2 2 3 4
W)
0.6745 \l;r(n-1)
0.8453 ~~)
0.8453
nm
0.6745 0.4769 0.3894
0.4769 0.2754 0.1947
0.5978 0.3451 0.2440
04227 01993 0.1220
5 6 7 a 9
0.3372 0.3016 0.2754 0.2549 0.2385
0.1508 0.1231 0.1041 0.0901 0.0795
0.1890 0.1543 0.1304 0.1130 0.0996
0.0845 00630 0 0493 0 0399 00332
42 40 37 36 33
IO 11 12 13 14
0.2248 0.2133 0.2034 0.1947 o.la7l
0.0711 0.0643 0.0587 0.0540 0.0500
0.0891 0.0806 0.0736 0.0677 0.0627
00282 00243 0.0212 00188 00167
31 29 27 25 23
15 16 17 ia 19
0.1803 0.1742 0.1686 0.1636 0.1590
0.0465 0.0435 0.0409 0.0386 0.0365
0.0583 0.0546 0.0513 0.0483 0.0457
00151 00136 00124 00114 00105
20 19 17 16 13
20 21 22 23 24
0.1547 0.1508 0.1472 0.1438 0.1406
0.0346 0.0329 0.0314 0.0300 0.0287
0.0434 0.0412 0.0393 0.0376 0.0360
0 0097 0 0090 00084 00078 0.0073
13 10 IO 9 7
25 26 27 28 29
0.1377 0.1349 0.1323 0.1298 0.1275
0.0275 0.0265 0.0255 0.0245 0.0237
0.0345 0.0332 0.0319 0.0307 0.0297
0 0069 00065 00061 00058 00055
0.957 0.963 0 969 0.974 0 978
30 31 32 z:
0.1252 0.1231 0.1211 0.1192 0.1174
0.0229 0.0221 0.0214 0.0208 0.0201
0.0287 0.0277 0.0268 0.0260 0.0252
00052 00050 00047 00045 0.0043
3.5 36 3.7 38 3.9
0 982 0985 0 987 0990 0991
35 36 37 38 39
01157 0.1140 0.1124 0.1109 0.1094
0.0196 0.0190 0.0185 0.0180 0.0175
0.0245 0.0238 0.0232 0.0225 0.0220
00041 00040 00038 00037 00035
4.0
0993
5.0
0.999
40 45
0.1080 0.1017
0.0171 0.0152
0.0214 0.0190
00034 00028
50 55
0.0964 0.0918
0.0136 0.0124
0.0171 0.0155
0.0024 0.0021
60 65
0.0878 0.0843
0.0113 0.0105
0.0142 0.0131
00018 0.0016
70 75
0.0812 0.0784
0.0097 0.0091
0.0122 0.0113
00015 0.0013
a0 a5
0.0759 0.0736
0.0085 0.0080
0.0106 0.0100
0.0012 0.0011
90 95
0.0715 0.0696
0.0075 0.0071
0.0094 0.0089
0.0010 0.0009
100
0.0678
0.0068
0.0085
0.0008
50 49 48 45 44
6
a = any positivequantity, y = number of residualsthat are numericallysmaller than 1, r = probable errorof a single observation.and n = number of observations.
1-62
PETROLEUM
TABLE1.34-COMPOUND INTEREST-AMOUNTOFAGIVEN
ENGINEERING
PRINCIPAL
The amount A at the end of n years of a given principalP placed at compound Interesttoday isA = Px xor A = Px yorA = P xz,according asiheinterest(attherateofipercentperannum) iscompounded annually,semtannually,or quarterly; the factorx or yorz being taken from the followingtables. Values of x-Interest Compounded
4
4'12
6
7
2'/2
3
3'12
1.0200 1.0404 1.0612 1.0824
1.0250 1.0506 1.0769 1.1038
1.0300 1.0609 1.0927 11255
1.0350 1.0712 1.1087 1.1475
1.0400 1.0816 1.1249 1.1699
10450 1.0920 1.1412 1.1925
1.0500 1.1025 1.1576 1.2155
1.0600 1.1236 1.1910 1.2625
1.0700 1.1449 12250 1.3108
8 9
1.1041 1.1262 1.1487 1.1717 11951
1.1314 1.1597 1.1887 1.2184 1.2489
1.1593 1.1941 1.2299 12668 13048
1.1877 1.2293 1.2723 1.3168 1.3629
1.2167 1.2653 1.3159 1.3686 1.4233
1.2462 1.3023 1.3609 1.4221 14861
1.2763 1.3401 1.4071 1.4775 1.5513
1.3382 1.4185 1.5036 1.5938 1.6895
1.4026 1.5007 1.6058 1.7182 1.8385
10 11 12 13 14
1.2190 1.2434 1.2682 1.2936 1.3195
1.2801 1.3121 1.3449 1.3785 1.4130
13439 1.3842 14258 14685 15126
1.4106 1.4600 1.5111 1.5640 1.6187
1.4802 1.5395 1.6010 1.6651 1.7317
1.5530 1.6229 1.6959 1.7722 1.8519
1.6289 1.7103 1.7959 1.8856 1.9799
1.7908 1.8983 2.0122 2.1329 2.2609
1.9672 2.1049 22522 2.4098 2.5785
15 16 17 18 19
1.3459 1.3728 1.4002 1.4282 1.4568
1.4483 1.4845 1.5216 1.5597 1.5987
15580 1.6047 1.6528 1.7024 1.7535
1.6753 1.7340 1.7947 18575 1.9225
1.8009 1.8730 1.9479 2.0258 2.1068
1.9353 2.0224 2.1134 2.2085 2.3079
2.0789 2.1829 2.2920 2.4066 2.5270
2.3966 2.5404 2.6928 2.8543 3.0256
2.7590 2.9522 3.1588 3.3799 3.6165
20 25 30
1.4859 1.6406 1.8114
1.6386 1.8539 2.0976
1.8061 20938 2.4273
1.9898 2.3632 2.8068
2.1911 2.6658 3.2434
2.4117 3.0054 3.7453
2.6533 3.3864 4.3219
3.2071 4.2919 5.7435
3.8697 5.4274 7.6123
40 50 60
2.2080 2.6916 3.2810
2.6851 3.4371 4.3998
32620 43839 5.8916
3.9593 5.5849 7.8781
4.8010 7.1067 10.520
5.8164 9.0326 14.027
7.0400 11.467 18.679
Years
‘This table IS computed
from the formula
5
10.286 18.420 32.988
14.974 29.457 57.946
Y= 1 +(!/lClO)”
Values of y-interest Compounded
Semiannually: A = Pxy’
4%
5
6
7
2'/2
3
1.0201 1.0406 1.0615 1.0829
1.0252 1.0509 1.0774 1.1045
1.0302 1.0614 1.0934 1.1265
1.0353 1.0719 1.1097 1.1489
1.0404 1.0824 1.1282 1.1717
1.0455 1.0931 1.1428 1.1948
1.0506 1.1038 1.1597 12184
1.0609 I.1255 1.1941 1.2668
1.0712 1.1475 1.2293 1.3168
5 6 7 8 9
1.1046 1.1268 1.1495 1.1728 1.1961
1.1323 1.1608 1.1900 1.2199 1.2506
1.1605 1.1956 1.2318 1.2690 1.3073
1.1894 1.2314 1.2749 1.3199 1.3665
1.2190 1.2682 1.3195 1.3728 1.4282
1.2492 1.3060 1.3655 1.4276 1.4926
1.2801 1.3449 1.4130 1.4845 1.5597
1.3439 1.4258 1.5126 1.6047 17024
1.4106 1.5111 1.6187 1.7340 1.8575
IO 11 12 13 14
1.2202 1.2447 2.2697 1.2953 1.3213
1.2820 1.3143 1.3474 1.3812 1.4160
1.3469 1.3876 1.4295 1.4727 1.5172
1.4148 1.4647 1.5164 1.5700 1.6254
1.4859 1.5480 1.6084 1.6734 1.7410
1.5605 1.6315 1.7058 1.7834 1.8645
16386 1.7216 18087 1.9003 1.9965
1.8061 1.9161 2.0328 2.1566 2.2879
1.9898 2.1315 2.2833 2.4460 2.6202
15 16 17 18 19
1.3478 1.3749 1.4026 1.4308 1.4595
1.4516 1.4881 1.5256 1.5639 1.6033
1.5631 1.6103 1.6590 1.7091 1.7608
1.6828 1.7422 1.8037 1.8674 1.9333
1.8114 1.8845 1.9607 2.0399 2.1223
1.9494 2.0381 2.1308 2.2278 2.3292
2.0976 2.2038 2.3153 2.4325 2.5557
2.4273 2.5751 2.7319 2.8983 3.0748
2.8068 3.0067 3.2209 3.4503 3.6960
20 25 30
1.4889 1.6446 1.8167
1.6436 1.8610 2.1072
1.8140 2.1052 2.4432
2.0016 2.3808 2.8318
2.2080 2.6916 3.2810
2.4352 3.0420 3.8001
2.6851 3.4371 4.3998
3.2620 4.3839 5.8916
3.9593 5.5849 7.8781
40 50 60
2.2167 2.7048 3.3004
2.7015 3.4634 4.4402
3.2907 4.4320 5.9693
4.0064 5.6682 8.0192
4.8754 7.2446 10.765
5.9301 9.2540 14.441
‘This table IS computed
3%
4
i=2
1 2 3 4
Years ~
Annually:A=Pxx’
from the formula y = t + (W’OO)“’
7.2096 11.814 19.358
10.641 19.219 34.711
15.676 31.191 62.064
HANDBOOK
MATHEMATlCALTABLES8,
TABLE
UNITS&
SYSTEMSOF
1.34-COMPOUND
WEIGHTS
& MEASURES
INTEREST-AMOUNT
Values of z--InterestCompounded
OF
1-63
A GIVEN
PRINCIPAL
(continued)
Quarterly:A=Pxz'
1=2
2112
3
1.0202 1.0407 1.0617 1.0831
1.0252 1.0511 1.0776 1.1048
10303 1.0616 10938 1 1270
1.0355 1.0722 1.1102 1.1496
1.0406 1.0829 1.1268 1.1726
1.0458 1.0936 1.1437 1.1960
1.0509 1.1045 1.1608 1.2199
1.0614 1.1265 1.1956 1.2690
1.0719 1.1489 1.2314 1.3199
8 9
1.1049 1.1272 1.1499 1 1730 1.1967
1.1327 1 1613 1.1906 12206 12514
1.1612 11964 1.2327 12701 1.3086
1.1903 12326 1.2763 1.3215 1.3684
12202 1.2697 1.3213 1.3749 1.4308
1.2508 1.3080 1.3679 14305 1.4959
1.2820 1.3474 1.4160 1.4881 1.5639
1.3469 1.4295 1.5172 1.6103 1.7091
1.4146 1.5164 1.6254 1.7422 1.8674
10 11 12 13 14
1.2208 1.2454 1.2705 1.2961 1.3222
1.2830 13154 1.3486 1.3826 14175
1.3483 13893 14314 14748 1.5196
1.4169 14672 1.5192 1.5731 1.6288
1.4889 1.5493 1.6122 16777 1.7458
1.5644 1.6360 1.7108 1.7891 1.8710
1.6436 1.7274 1.8154 1.9078 2.0050
1.8140 1.9253 2.0435 2.1689 2.3020
2.0016 2.1454 2.2996 2.4648 2.6420
15 16 17 18 19
1.3489 1.3760 1.4038 1.4320 1.4609
1.4533 1.4900 1.5276 1.5661 1.6056
1.5657 1.6132 1.6621 17126 17645
1.6866 1.7464 1.8063 1.8725 1.9389
1.8167 1.8905 1.9672 2.0471 2.1302
1.9566 2.0462 2.1398 22378 2.3402
2.1072 22145 2.3274 2.4459 2.5705
2.4432 2.5931 2.7523 2.9212 3.1004
2.8318 3.0353 3.2534 3.4872 3.7378
20 25 30
1.4903 1.6467 18194
1.6462 1.8646 2.1121
1 8180 2.1111 2.4514
2.0076 23898 28446
2.2167 2.7048 3.3004
2.4473 3.0609 3.8285
2.7015 3 4634 4.4402
3.2907 4.4320 5.9693
4.0064 5.6682 8.0192
40 50 60
2.2211 27115 3.3102
2.7098 3.4768 44608
3.3053 4.4567 6.0092
4.0306 5.7110 8.0919
49138 7.3160 10893
5.9892 9.3693 14.657
7.2980 11.995 19.715
Years 2 4 5 6
'Th,s table IS compuled
3%
4
4%
5
7
6
10.828 19.643 35.633
16051 32.128 64.307
from ,he formula z= 1 +(,,400)111
TABLE
1.35-AMOUNT
OF AN ANNUITY
The amount S accumulated at the end of n years by a given annual payment Y set aside at the end of each year is S= Yx v. where the factor\Iis taken from the followingtable.(Interest at i percent per annum, compounded annually) Values of V* Years
3
3%
4
4'h
5
A
7.
r=2
2%
10000 20200 30604 41216
10000 20250 3.0756 4.1525
1.0000 2.0300 3.0909 41836
1.0000 2.0350 3 1062 4.2149
10000 2 0400 3.1216 4.2465
10000 20450 3.1370 4.2782
1 0000 20500 3.1525 4.3101
1.0000 2.0600 3.1836 4.3746
1.0000 2.0700 3.2149 4.4399
52040 63081 74343 85830 9.7546
5.2563 6.3877 7.5474 87361 9 9545
5.3091 64684 7.6625 8.8923 10.159
53625 65502 7.7794 90517 10368
5.4163 66330 7.8983 9.2142 10.583
5.4707 6.7169 8.0192 9.3800 10.802
55256 6.8019 8.1420 9.5491 11.027
5.6371 6.9753 8.3938 9 8975 11.491
5.7507 7.1533 8.6540 10260 11.978
10 11 12 13 14
10.950 12169 13.412 14.680 15974
11.203 12.483 13.796 15.140 16519
11.464 12808 14192 15.618 17086
11 731 13.142 14602 16113 17677
12006 13.486 15026 16627 18 292
12.288 13.841 15.464 17.160 18.932
12.578 14.207 15.917 17.713 19.599
13.181 14972 16870 18882 21 015
13.816 15784 17888 20.141 22550
15 16 17 18 19
17293 18639 20012 21 412 22.841
17.932 19.380 20.865 22386 23.946
18599 20157 21 762 23.414 25.117
19296 20971 22705 24500 26357
20024 21.825 23 698 25.645 27.671
20.784 22.719 24.742 26.855 29.064
21 579 23.657 25840 28.132 30.539
23276 25673 28213 30906 33 760
25129 27.668 30840 33.999 37.379
20 25 30
24297 32030 40568
25545 34.158 43.903
26 870 36.459 47.575
28280 38950 51 623
29.778 41.646 56.085
31 371 44.565 61.007
33.066 47.727 66.439
36786 54865 79058
40.995 63249 94461
40 50 60
60.402 84.579 11405
75.401 112.80 163.05
84.550 131 00 19652
95.026 152.67 237.99
67403 97484 135.99
107.03 17850 289 50
120.80 209.35 353.58
154.76 290.34 533.13
19964 406.53 81352
1-64
PETROLEUM
TABLE
1.36-PRINCIPAL
AMOUNTING
TO A GIVEN
ENGINEERING
SUM
The pnncipal P whrch. tfplaced at compound interesttoday, willamount to a given sum A at the end ofn years ISP=A xx'or P=A xy'or P= A xz', according as the interest (atthe rateof i percent per annum)is compounded annually,semiannually,orquarterly; thefactorx'or y'orz'beingtaken from the followingtables. Values of x,-InterestCompounded
Annually:P=A
xx” 5
6
7
0.98039 0.96117 0 94232 0.92385
0.97561 0.95181 0.92860 0.90595
0 97087 0 94260 091514 0 88849
0.96618 0.93351 0.90194 0.87144
0.96154 0.92456 0.88900 0.85480
0.95694 0.91573 0.87630 0.83856
0.95238 0.90703 0.86384 0.82270
0.94340 0.89000 0.83962 0.79209
0.93458 0.87344 0.81630 0.76290
9
0 90573 0.88797 0.87056 0.85349 0.83676
0.88385 0.86230 0.84127 0.82075 0.80073
0.86261 083748 0 81309 0.78941 0.76642
0.84197 0.81350 0.78599 0.75941 0.73373
0.82193 0.79031 0.75992 0.73069 0.70259
0.80245 0.76790 0.73483 0.70319 0.67290
0.78353 074622 0.71068 067684 0.64461
0.74726 0.70496 0.66506 0.62741 0.59190
0.71299 0.66634 0.62275 0.58201 0.54393
10 11 12 13 14
0.82035 0.80426 0.78849 0.77303 0.75788
0.78120 076214 0.74356 0.72542 0.70773
0.74409 0.72242 0.70138 0.68095 0.66112
0.70892 068495 0.66178 0.63940 0.61778
0.67556 0.64958 0.62460 0.60057 0.57748
0.64393 0.61620 0.58966 0.56427 0.53997
0.61391 0.58468 0.55684 0.53032 0.50507
0.55839 0.52679 0.49697 0.46884 0.44230
0.50835 0.47509 0.44401 0.41496 0.38783
15 16 17 18 19
0.74301 0.72845 0.71416 0.70016 0.68643
0.69047 0.67362 0.65720 0.64117 0.62553
0.64186 0.62317 0.60502 0.58739 0.57029
0.59689 0.57671 0.55720 0.53839 0.52016
0.55526 0.53391 0.51337 0.49363 0.47464
0.51672 0.49447 0.47318 0.45280 0.43330
0.48102 0.45811 0.43630 0.41552 0.39573
0.41727 0.39365 0.37136 0.35034 0.33051
0.36245 0.33873 0.31657 0.29586 0.27651
20 25 30
0.67297 0.60953 0.55207
0 61027 0.53939 0.47674
0.55368 0.47761 0.41199
0.50257 0.42315 0.35628
0.45639 0.37512 0.30832
0.41464 0.33273 0.26700
0.37689 0 29530 0.23138
0.31180 0.23300 0.17411
0.25842 0.18425 0.13137
40 50 60
0.45289 0.37153 0 30478
0.37243 0.29094 0.22728
0.30656 0.22811 0.16973
0.25257 0.17905 0.12693
0.20829 0.14071 0.09506
0.17193 0.11071 0.07129
0.14205 0.08720 0.05354
0.09722 0.05429 0.03031
0.06678 0.03395 0.01726
Years
i=2
2%
Values of y'-InterestCompounded Years
3%
3
4
4%
Semiannually: P=Axy’
i=2
2%
3
5
6
7
1 2 3 4
0.98030 0.96098 0.94205 0.92348
0.97546 0.95152 0.92817 0.90540
097066 094218 0.91454 0.88771
0.96590 0.93296 0 90114 0 87041
0.96117 0.92385 0.88797 0.85349
0.95647 0.91484 0.87502 0.83694
0.95181 0.90595 0.86230 0.82075
0.94260 0.88849 0.83748 0.78941
0.93351 0.87144 0.81350 0.75941
5 6 7 8 9
0.90529 0.88745 0.86996 0.85282 0.83602
0.88318 0.86151 0.84037 0.81975 0.79963
0.86167 0.83639 0.81185 0.78803 0.76491
0 84073 0 81206 0 78436 0.75762 0 73178
0.82035 0.77849 0.75788 0.72845 0.70016
0.80051 0.76567 0.73234 0.70047 0.66998
0.78120 0.74356 0.70773 0.67362 0.64117
0.74409 0.70138 0.66112 062317 0 58739
0.70892 0.66178 0.61778 0.57671 0.53836
10 11 12 13 14
0.81954 0.80340 0.78757 077205 0.75684
0.78001 0.76087 0.74220 0.72398 0.70622
0.74247 0.72069 0.69954 0.67902 0.65910
0.70682 0.68272 0.65944 0 63695 061523
0.67297 0.64684 0.62172 0.59758 0.57437
0.64082 0.61292 0.58625 0.56073 0.53632
0.61027 0.58086 0.55288 0.52623 0.50088
055368 052189 049193 0 46369 043708
0.50257 0.46915 0.43796 0.40884 0.38165
15 16 17 18 19
0.74192 0.72730 0.71297 069892 0.68515
0.68889 0.67198 0.65549 0.63941 0.62372
0.63976 0.62099 0.60277 058509 056792
0 59425 0 57398 0 55441 0.53550 051724
0.55207 0.53063 0.51003 0.49022 0.47119
0.51298 0.49065 0.46930 0.44887 0.42933
0.47674 045377 0.43191 0.41109 0.39128
041199 038834 0.36604 0.34503 0.32523
0.35628 0 33259 0.31048 0.28983 0.27056
20 25 30
0.67165 060804 055045
0.60841 0.53734 0.47457
0 55126 047500 040930
0.49960 042003 035313
0.45289 0.37153 030478
0.41065 032873 0.26315
0.37243 0.29094 0.22728
0.30656 0.22811 0.16973
0.25257 0.17905 0.12693
40 50 60
0.45112 0.36971 0.30299
0.37017 0.28873 0.22521
0 30389 0 22563 016752
0.24960 0.17642 0.12470
0.20511 0.13803 0.09289
0.16863 0.10806 0.06925
0.13870 0.08465 005166
0.09398 0.05203 002881
0.06379 0.03206 001611
3%
4
4%
HANDBOOK
MATHEMATICALTABLES
& UNITS
TABLE
&SYSTEMS
OF WEIGHTS
1.36-PRINCIPAL
Values of z’-InterestComoounded
1-65
& MEASURES
AMOUNTING
Quarterlv:P=A
TO A GIVEN
SUM
(continued)
xz’*
i=2
2%
3
4
4%
5
6
7
1 2 3 4
0.98025 0.96089 0.94191 0.92330
0.97539 0.95138 0.92796 0.90512
0.97055 0.94198 0.91424 0.88732
0.96575 0.93266 0.90074 0.86989
0.96098 0.92348 0.88745 0.85282
0.95624 0.91439 0.87437 0.83611
0.95152 0.90540 0.86151 0.81975
0.94218 0.88771 0.83639 0.78803
0.93296 0.87041 0.81206 0.75762
5 6 7 8 9
0.90506 0.88719 0.86966 0.85248 0.83564
0.88284 0.86111 0.83991 0.81924 0.79908
086119 0.83583 0.81122 0.78733 0.76415
0.84010 0.81132 0 78354 0 75670 0 73079
0.81954 0.78757 0.75684 0.72730 0.69892
0.79952 0.78453 0.73107 0.89908 0.66849
0.78001 0.74220 0.70622 0.87198 0.63941
074247 0.69954 0.65910 0.62099 0.58509
0.70682 0.65944 0.61523 0.57390 0.53550
IO 11 12 13 14
0.81914 0.80296 0.78710 0.77155 0.75631
0.77941 0.76022 0.74151 0.72326 0.70546
0.74165 0.71981 0.69861 0.67804 0.65808
070576 068159 065825 0.63570 0.61393
0.67165 0.64545 0.62026 0.59606 0.57280
0.63923 0.61126 0.58451 0.55893 0.53447
0.60841 0.57892 0.55086 0.52415 0.49874
0.55126 0.51939 0 48936 046107 0.43441
0.49960 0.46611 0.43486 0.40570 0.37851
15 16 17 18 19
0.74137 0.72673 0.71237 0.69830 0.68451
0.68809 0.67115 0.65464 0.63852 0.62281
0.63870 0.61989 0.60164 0.58392 0.56673
0.59291 0.57260 0 55299 0.53405 0.51576
0.55045 0.52897 0.50833 0.48850 0.46944
0.51108 0.48871 0.46733 0.44687 0.42732
0.47457 0.45156 0.42967 0.40884 0.38903
0.40930 0.38563 0.36334 0.34233 032254
0.35313 0.32946 0.30737 0.28676 0.26754
20 25 30
0.67099 0.60729 0.54963
0.60748 0.53630 0.47347
0.55004 0.47369 0.40794
0.49810 041845 035154
0.45112 0.36971 0.30299
0.40862 0.32670 0.26120
0.37017 0.28873 0.22521
0.30389 0.22563 0.16752
0.24960 0.17642 0.12470
40 50 60
0.45023 0.36880 0.30210
0.36903 0.28762 0.22417
0.30255 0.22438 0.16641
0.24810 0.17510 012358
0.20351 0.13669 0.09181
0.16697 0.10673 0.06823
0.13702 0.08337 0.05072
0.09235 0.05091 0.02806
0.06230 0.03113 0.01555
Years
3%
'The formula used for this lable IS L'= [l +(1/100)]
TABLE
1.37-ANNUITY
= l/z
AMOUNTING
TO A GIVEN
SUM
(SINKING FUND)
The annual payment, V, which, ifset aside at the end of each year, willamount with accumulated interesttoagivensum Sattheendofnyearsis Y=Sxv', wherethefactorv'isgiven below. Interest is i percent per annum, compounded annually.)
Values of v" 2%
3
3%
4
5
6
7
2 3 4
0.49505 0.32675 024262
0.49383 0.32514 0.24082
0.49261 0.32353 0.23903
0.49140 0.32193 0.23725
0.49020 0.32035 0.23549
0.48900 0.31877 0.23374
0.48780 0.31721 0.23201
0.48544 0.31411 0.22859
0 48309 031105 022523
5 6 8 9
019216 015853 013451 0.11651 010252
0.19025 0.15655 013250 0.11447 0.10046
0.18835 0.15460 013051 0.11246 0.09843
0.18648 0.15267 0.12854 0.11048 0.09645
0 18463 0.15076 012661 0.10853 0.09449
0.18279 0.14888 0.12470 0.10661 0.09257
0.18097 0.14702 0.12282 0.10472 0.09069
0.17740 0.14336 011914 0.10104 0.08702
017389 0 13980 011555 0 09747 0 08349
10 11 12 13 14
009133 0.08218 0 07456 006812 0.06260
0.08926 0.08011 0.07249 0.06605 0.06054
0.08723 0.07808 0.07046 0.06403 0.05853
0.08524 0.07609 0.06848 0.06206 0.05657
008329 0.07415 0.06655 0.06014 005467
0.08138 0.07225 0.06467 0.05828 0.05282
0.07950 0.07039 0.06283 0.05646 0.05102
0.07587 0.06679 0.05928 0.05296 0.04758
007238 0.06336 0.05590 004965 0.04434
15 16 17 18 19
0.05783 0.05365 0 04997 0.04670 0.04378
0.05577 0.05160 0.04793 0.04467 0.04176
0.05377 0.04961 0.04595 0.04271 0.03981
0.05183 0.04768 0.04404 0.04082 0.03794
0.04994 0.04582 0.04220 0.03899 003614
0.04811 0.04402 0.04042 0.03724 0.03441
0.04634 0.04227 0.03870 0.03555 0.03275
0.04296 0.03895 0.03544 0.03236 0.02962
0.03979 0.03586 003243 0.02941 0.02675
20 25 30
0.04116 003122 0.02465
0.03915 0.02928 0.02278
0.03722 0.02743 0.02102
0.03536 0.02567 0.01937
003358 002401 001783
0.03188 0.02244 0.01639
0.03024 0.02095 0.01505
0.02718 0.01823 0.01265
0.02439 0.01581 0.01059
40 50 60
0.01656 0.01182 0.00877
0.01484 0.01026 0.00735
0.01326 0.00887 0.00613
0.01183 0.00763 0.00509
0.01052 000655 0.00420
0.00934 0.00560 0.00345
0.00828 0.00478 0.00283
0.00646 0.00344 0.00188
0.00467 000238 0.00121
Years
i=2
'The fctmula
used for this table IS v'=(1/100111~[1 +(r/IOOJ]
- 1 I = II"
4%
l-66
PETROLEUM
TABLE
1.38-PRESENT
WORTHOFAN
ENGINEERING
ANNUITY
Thecaprtal C, which. tfplaced al interesttoday,wrllprovide fora given annual payment Yfor a term of "years before itISexhausted isC= YX w,wherethefactor w ISgiven below (Interestatipercent per annum, compounded annually.) Values of w* Years
/=2
2%
3
3%
4
4%
5
6
7
1 2 3 4
0.9804 1.9416 2.8839 3.8077
0.9756 1.9274 2.8560 3.7620
0.9709 1.9135 2.8286 3.7171
0.9662 1.8997 2.8016 3.6731
0.9615 1.8861 2.7751 3.6299
0.9569 1.8727 2.7490 3.5875
0.9524 1.8594 2.7232 3.5460
0.9434 1.8334 2.6730 3.4651
0.9346 1.8080 2.6243 3.3872
5 6 i 9
4.7135 5.6014 6.4720 7.3255 8.1622
4.6458 5.5081 6.3494 7.1701 7.9709
4.5797 5.4172 6.2303 7.0197 7.7861
4.5151 5.3286 6.1145 6.8740 7.6077
4.4518 5.2421 6.0021 6.7327 7.4353
4.3900 5.1579 5.8927 6.5959 7.2688
4.3295 5.0757 5.7864 6.4632 7.1078
4.2124 4.9173 5.5824 6.2098 6.8017
4.1002 4.7665 5.3893 5.9713 6.5152
10 11 12 13 14
8.9826 9.7868 10.575 11.348 12.106
8.7521 9.5142 10.258 10983 11.691
8.5302 9.2526 9.9540 10.635 11.296
8.3166 9.0016 9 6633 10303 10921
8.1109 8.7605 9 3851 9.9856 10.563
7.9127 8.5289 9.1186 9.6829 10.223
7.7217 8.3064 8.8633 9.3936 9.8986
7.3601 7.8869 8.383% 8.8527 9.2950
7.0236 7.4987 7.9427 8.3577 8.7455
15 16 17 18 19
12.849 13.578 14.292 14992 15.678
12.381 13.055 13.712 14.353 14.979
11.938 12.561 13.166 13.754 14.324
11.517 12.094 12.651 13190 13.710
11.118 11.652 12.166 12.659 13.134
10.740 11.234 11.707 12.160 12.593
10.380 10.838 il.274 11.690 12065
9.7122 10 106 10.477 10.828 11.158
9 1079 9.4466 9.7632 10.059 10.336
20 25 30
16.351 19.523 22.396
15.589 18.424 20.930
14.877 17.413 19.600
14.212 16.482 18.392
13.590 1562'2 17.292
13.008 14.828 16.289
12.462 14093 15.372
11.470 12.783 13.765
10.594 11.654 12.409
40 50 60
27.355 31.424 34.761
25.103 28.362 30.909
23.115 25.730 27.676
21 355 23.456 24.945
19.793 21.482 22.623
18.402 19.762 20.638
17.159 18.256 18.929
15.046 15.762 16.161
13.332 13 801 14.039
‘The formula
used lor thls table IS w = :1 -[1 + (l/l OO)]
TABLEl.39-ANNUITY
I/(r/loo,= "ix
PROVIDED
FOR
BYAGIVENCAPITAL
The annual payment Yprovided forfora term ofn years by agiven capitalcplaced atinteresttoday is Y=Cx w'. Interestat i percent per annum, compounded annually;the fund is supposed lo be exhausted at the end of the term. Values of w" Years ~
2%
3
5
6
7
2 3 4
0.51505 0.34675 0.26262
0.51883 0.35014 0.26582
0.52261 0.35353 0.26903
0.52640 035693 0.27225
0.53020 0.36035 0.27549
0.53400 0.36377 0.27874
0.53780 0.36721 0.28201
0.54544 0.37411 0.28859
0.55309 0.38105 0.29523
E 7 8 9
0.21216 0.17853 0.15451 0.13651 0.12252
0.21525 0.18155 0.15750 0.13947 0.12546
021835 018460 0 16051 0.14246 0.12843
0.22148 0.18767 0.16354 0.14548 0.13145
0.22463 0.19076 0.16661 0.14853 0.13449
0.22779 0.19388 0.16970 0.15161 0.13757
0.23097 019702 0.17282 0 15472 0.14069
0.23740 0.20336 0.17914 0.16104 0.14702
0.24389 0.20980 0.18555 0.16747 0.15349
10 11 12 13 14
0.11133 0.10218 0.09456 0.08812 0.08260
0.11426 0.10511 0.09749 0.09105 0.08554
0.11723 0.10808 0.10046 0.09403 0.08853
0.12024 0.11109 0.10348 0.09706 0.09157
0.12329 0.11415 0.10655 0.10014 0.09467
0.12638 0.11725 0.10967 0.10328 0.09782
0.12950 0.12039 0.11283 0.10646 0.10102
0.13587 0.12679 0.11928 0.11296 0.10758
0.14238 0.13336 0.12590 0.11965 0.11434
15 16 17 18 19
0.07783 0.07365 0.06997 0.06670 0.06378
0.08077 0.07660 0.07293 0.06967 0.06676
0.08377 0.07961 0.07595 0.07271 0.06981
0.08683 0.08268 0.07904 0.07582 0.07294
0.08994 0.08582 0.08220 0.07899 0.07614
0.09311 0.08902 0.08542 0.08224 0 07941
0.09634 0.09227 008870 0.08555 0.08275
0.10296 0.09895 0.09544 0.09236 0.08962
0.10979 0.10586 0.10243 0.09941 0.09675
20 25 30
0.06116 0.05122 0.04465
0.06415 0.05428 0.04778
0.06722 0.05743 0.05102
0.07036 0.06067 0.05437
0.07358 0.06401 0.05783
0.07688 0.06744 0.06139
0.08024 0.07095 0.06505
0.08718 0.07823 0.07265
0.09439 0.08581 0.08059
40 50 60
0.03656 0.03182 0.02877
0.03984 0.03526 0.03235
0.04326 0.03887 0.03613
0.04683 0.04263 0.04009
0.05052 0.04655 0.04420
0.05434 0.05060 0.04845
0.05828 0.05478 0.05283
0.06646 0.06344 0.06188
0.07467 0.07238 0.07121
i=2
3%
4
4%
HANDBOOK
MATHEMATlCALTABLES&UNlTS&SYSTEMSOFWElGHTS&
TABLE
MEASURES
1.40-DECIMAL
1-67
EQUIVALENTS Common
From Mrnutes and Seconds intoDecimal Parts of a Degree 0’ 2' 3' 4' 5' 6' 7' 8' 9' IO' 11' 12' 13' 14' 15' 16' 17' 18' 19' 20' 21' 22' 23' 24' 25' 26' 27' 20' 29' 30' 31' 32' 33' 34' 35' 36' 37' 30' 39' 40' 41' 42' 43' 44' 45' 46' 47' 40' 49' 50' 51' 52' 53' 54' 55' 56' 57' 58' 59' 60'
0~.0000 0' 1" 0~0167 00.0333 2" 00.05 3" 00.0667 4" 00.0833 5" 00.10 6" 7" O".1167 00.1333 8" 0".15 9" 00 1667 10" OO.1833 11" 00 20 12" OO.2167 13" OO.2333 14" 15" OO.25 OO.2667 16" O" 2833 17" 00.30 18" 00.3167 19" 00.3333 20" 00.35 21" 0".3667 22" OO.3833 23" 00.40 24" 0°.4167 25" OO.4333 26" 00.45 27" OO.4667 28" OO.4833 29" 00.50 30" OO.5167 31" OO.5333 32" 00.55 33" OO.5667 34" OO.5833 35" OO.60 36" OO.6167 37" OO.6333 38" OO.65 39" OO.6667 40" OO.6833 41" 00.70 42 " OO.7167 43" 44" 00.7333 45 I' 00.75 46" OO.7667 47" O" 7833 48" O".l30 0'=.8167 49 " OO.8333 50" 51 " OO.85 52" OO.8667 OO.8833 53" 0".90 54 VI OO.9167 55 'I 00 9333 56" 57" 00 95 58" OO.9667 OO.9833 59" 10.00 60"
00 .oooo 0?0003 0°.0006 0" 0008 0~.0011 0~.0014 0~.0017 0".0019 000022 0".0025 0" 0028 0~.0031 000033 On.0036 00.0039 0'.0042 00.0044 00 0047 00.005 00.0053 0'.0056 O".0058 0".0061 0?0064 0".0067 0~.0069 0".0072 00.0075 0'.0078 0°0081 O".0083 OO.0086 0" 0089 00 0092 0" 0094 0?0097 O".Ol 0?0103 0".0106 O".0108 O?Olll 0~.0114 00.0117 0?0119 00.0122 OO.0125 OO.0128 0?0131 00.0133 0?0136 0".0139 0°.0142 oa.0144 000147 0".015 00.0153 OO.0156 0'.0158 O".0161 OYO164 00.0167
From Decrmal Parts of a Degree intoMinutes and Seconds (exact valuesi 30.00 IO.01 IO.02 IO.03 IO.04 IO.05 IO.06 30.07 IO.08 Y.09 30.10 IO.11 30.12 Y.13 IO.14 IO.15 IO.16 IO.17 IO.18 IO.19 IO.20 10 21 IO.22 IO.23 I" 24 IO.25 IO.26 IO.27 IO.28 10 29 IO.30 IO.31 I" 32 IO.83 IO.34 IO.35 IO.36 IO.37 IO.38 IO.39 30.40 IF.41 IO.42 IO.43 IO.44 IO.45 IO.46 IO.47 IO.48 30 49 I".50
0’ 0' 36" 1' 12" 1' 48" 2' 24" 3' 3' 36" 4' 12" 4' 48" 5' 24" 6' 6' 36" 7' 12" 7' 48" 8' 24" 9' 9' 36" IO' 12" 10' 48" 11' 24" 12' 12' 36" 13' 12" 13' 48" 14' 24" 15' 15' 36" 16' 12" 16' 48" 17' 24" 18' 18' 36" 19' 12" 19' 48" 20' 24" 21' 21' 36" 22' 12" 22' 48" 23' 24" 24' 24' 36" 25' 12" 25' 48" 26' 24" 27' 27' 36" 28' 12" 28' 48" 29' 24" 30'
00.50 00 51 OO.52 00.53 00.54 00.55 O" 56 00.57 OO.58 00.59 OO.60 OO.61 00 62 OO.63 OO.64 0".65 00 66 OO.67 00.68 O" 69 OO.70 00.71 O" 72 00 73 0" 74 00.75 0" 76 00 77 0".78 00.79 00.80 OO.81 0".82 OO.83 0".84 OO.85 00.86 0' 87 00 88 O" 89 00.9c 00 91 00.92 00 93 00.94 00 95 0".96 00.97 0".98 00.99 I".00
0”.000 O%OOl 0".002 00.003 00.004 0?005 O".006 00.007 0“.008 00.009 O".OIO
0” 3" 7" 10" 14" 18" 21" 25" 28" 32" 36"
30 30' 36" 31' 12" 31' 48" 32' 24" 33' 33' 36" 34' 12" 34' 48" 35' 24" 36' 36' 36" 37' 12" 37' 48" 38' 24" 39' 39' 36" 40' 12" 40' 48" 41' 24" 42' 42' 36" 43' 12" 43' 48" 44' 24" 45' 45' 36" 46' 12" 46' 48" 47' 24" 48' 48' 36" 49' 12" 49' 48" 50' 24" 51' 51' 36" 52' 12" 52' 48" 53' 24" 54' 54' 36" 55' 12" 55' 48" 56' 24" 57' 57' 36" 58' 12" 58' 48" 59' 24" 60'
16ths
1 1
2 3
2
4 5
3
6 7
4
8 9
5
10 11
6
12 13
7
14 15
8
16 17
9
18 19
10
20 21
11
22 23
12
24 25
13 .o 6 2 .8 .4
32nds
26 27
14
28 29
.6 .2 8 4
15
30 31
Fractrons
64ths 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Exact Decrmal Values 0.01 0.03 0.04 0.06 0.07 009 0.10 0.12 0.14 0.15 017 0.18 0.20 0.21 0.23 0.25 026 0.28 0.29 031 0.32 0.34 035 0.37 0.39 0.40 0.42 0.43 0.45 0.46 0.48 0.50 051 0.53 0.54 0.56 0.57 059 060 0.62 0.64 0.65 0.67 068 0.70 0.71 0.73 0.75 0.76 0.78 0.79 0.81 0.82 0.84 0.85 0.87 0.89 0.90 0.92 0.93 0.95 0.96 0.98
5625 125 6875 25 8125 375 9375 5 0625 625 1875 75 3125 875 4375 5625 125 6875 25 8125 375 9375 5 0625 625 1875 75 3125 875 4375 5625 125 6875 25 8125 375 9375 5 0625 625 1875 75 3125 a75 4375 5625 125 6875 25 8125 375 9375 5 0625 625 1875 75 3125 875 4375
Units and Systems of Weights and Measures L.E.
Barbrow.
U.S. N,itl Bureau of Standards
The U.S. Natl. act of congress laboratory
Bureau of Standards was established by in 1901 to serve as a national scientific
in the physical
damental
measurement
sciences
standards
and to provide
fun-
for science and indus-
try. In carrying out these related functions the bureau conducts research and development in many fields of physics,
mathemstics,
chemistry,
time of its founding, primary standards-the
and engineering.
At the
the bureau had custody of two meter bar for length and the kilo-
A unit
is a value,
quantity,
which other values, pressed. In general, independent Examples
or magnitude
of such physical include
the yard.
conditions
al it is not independent
as temperature.
the pound.
meter, the liter, the gram. A .stumlurd is a physical embodiment a true embodiment
in terms of
quantities, or magnitudes are exa unit is fixed by definition and is
of physical
of the unit only
the gallon,
the
of a unit. In generconditions,
and it is
under specified
con-
gram cylinder for mass (or weight). With the phenomenal growth of science and technology over the past half
ditions. For example, a yard standard has a length of one yard when at some definite temperature and supported in
century,
a certain manner. If supported might have to be at a different
the bureau has become a major
research
institu-
tion concerned not only with everyday weights and measures but also with hundreds of other scientific and engineering industrial
standards progress
that have become
of the U.S.
necessary
Nevertheless,
still looks to the bureau for information weights and measures. particularly their
urements measures,
are made.
general
the present
Scientists by which knowledge
the U.S.
on the units of definitions and
and engineers are precision measof weights
and
status of units and standards,
and
miscellaneous facts that will be useful in their everyday professional life. The expression “weights and measures” is used here in its basic sense of referring
to measurements
of length,
mass, and capacity, thus excluding such topics as electrical and time measurements and thermometry. This section on units and systems of weights and measures presents some fundamental
information
subject and to eliminate terms.
to clarify
erroneous
thinking
and misleading
on this use of
of weights
that there be established between the terms “units”
and measures.
I yard.
The Metric System Definition,
Origin, and Development
The metric system* is the international system of weights and measures based on the meter and the kilogram. The essential features of the system were embodied made to the French
Natl.
Assembly
in a report
by the Paris Acade-
my of Sciences in 1791. The definitive action taken in 1791 was the outgrowth of recommendations along similar lines dating back to 1670. The adoption of the system in France was slow, but its desirability as an international system was recognized by geodesists and others. On May 20, 1875. an international treaty known as the Intl, Metric Convention was signed providing for an Intl. Bureau of Weights
and Measures,
thus ensuring
“the
in-
ternational unification and improvement of the metric system.” The metric system is now either obligatory or permissible
throughout
Although
the metric
the world. system
is a decimal
system,
the
words ‘*metric” and “decimal” are not synonymous, and care should be taken not to confuse the two terms.
Unit and Standard Definitions It is essential the distinction
of
manner, it in order to
to the
equivalents. The subject of weights and measures can be treated from several different standpoints. interested in the methods
have a length
in a different temperature
and kept in mind and “standards” ‘See also Chap
58
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
Units and Standards of the Metric System
& MEASURES
From
l-69
1893 until
1959. the yard was defined
units of length and
equal exactly
mass arc the tneter and the kilogram.
The other units of
length and mass. as well as all units ofarea. volume. and compound units such as density. are derived from thcxc
was tnade in the definition of the yard to resolve discrepancies both in the U.S. and abroad. Since 1959. the yard is defined as being equal exactly to 0.9144 m; the new
two fundamental units. From I960 to 1983. the meter was defined as the length
yard is shorter than the old vard by exactly two parts in a million. At the same time,*it was decided that anv data
equal to I 650 763.73
expressed
system,
vvavelengths
ation corresponding
in vacuum of the radi-
to the transition
between
the levels
21?tn and 5d5 of the krypton 86 atom. Since 1983. the meter has been defined as the length of the path travelled by
light
in
a
vacuum
during
a
time
I1299 792 458 of a second. The kilogram
interval
of
previously
dc-
fined as the mass of I cubic decimeter of water at the tempcraturc of maximum density was known as the Kilogram of the Archives.
It was replaced after the Intl. Metric
Con-
vention in 1875 by the Intl. Prototype Kilogram. which became the unit of mass vvithout reference to the mass of a cubic decimeter of water or to the Kilogram of the Archives. The liter is a unit of capacity. In 1964 the 12th General Conference on Weights and Measures redefined the liter as being I cubic decimeter. By its previous definitionthe volume quantity
occupied.
under
standard
of pure water having
conditions.
by a
a mass of I kilogram-the
liter was larger than the cubic decimeter by 28 parts in I 000 000; except for determinations of high precision, this difference is so small as to be of no consequence. The tnodernized
metric
system includes
“base”
units
such as units of temperature and time. as well as many “derived” units such as units of force and work. For details,
see Chap.
58.
the U.S.
in feet derived would
at Scvres,
a suburb of Paris, in accordance
precision
measurements.
tained by assessed contributions
The Bureau,
of the signatory
maingovcrn-
feet,
rods,
miles,
survey
squares thereof,
and photometry
in addi-
pressures.
Present Status of the Metric System in the U.S. in this country
was legal-
in 1866. but was not made ob-
ligatory. The speed of light in a vacuum and U.S. Prototype gram No. 20 are recognized length
as the primary
and mass for both the metric
Congress entitled A MmYc Auwrictr-A Dwi.sio~t W/MN Ti/irc Hus Cornc. In the last few years metric USChas been increasing rapidly in the U.S., principally facturing and educational sectors. Public
to prepare students to use the tnetric system of mcasuretnent with ease and facility as a part ofthe regular education program. signed Public
On Dec. 23. 1975. President Gerald Law 94-168. the Metric Conversion
I.
a U.S.
Board.
whose
functions
to the Dept.
as
of Con-
mercc, Office of Metric Progratns, to coordinate voluntary conversion to the tnetric system.
the
British and U.S. Systems The implication is sometimes made that the inch/pound system of weights and measures in the British Commonwealth
countries
and the U.S.
Kilo-
standards
of
and the inch-pound
in the U.S. the yard has
in terms of the meter and the pound in tertns
of the kilogram. There is in the U.S. no primary standard either of length or mass in the inch-pound system.
system
true that the U.S. and the British
are identical.
inch are defined
It is identi-
work. that they are practically identiusage, that a similar situation exists for pound,
and that many tables. such
as 12 in. = I ft, 3 ft= I yd, and 1,760 yd= I international mile, arc the same in both countries; but there are some very important differences. the U.S. differ
bushel.
the U.S. gallon.
from the corresponding
and their sub-
British
units. Also.
the British ton is 2,240 Ibm. whereas the ton generally used in the U.S. is the short ton of 2,000 Ibm. The American colonists adopted the English wine gallon of 23 I cu in. The English of that period used this wine gallon. but they also had another gallon. the ale gallon of 282 cu in. In 1824 these two gallons were abandoned by the British when they adopted
the British
277.42
I893
Metric
1982 were transferred
standards
Since
Ford Act
of 1975. This act declares a national policy of coordinating the increasing use of the metric system in the U.S.
defined as the volume ture of 62°F. which,
available.
in the tnanuLaw 93-380.
enacted Aug. 2 I, 1974, states that It IS the policy of the U.S. to encourage educational agencies and institutions
(customary) systems of measurement in this country because these standards are the most precise and reliable been defined
or the be con-
In 1971 the Natl. Bureau of Standards completed a 3-year study of the impact of increasing worldwide metric use on the U.S. The study ended with a report to the
First.
system
links.
therefore
vcrted to the corresponding metric values by using pre-1959 conversion factors whet-c more than tivcsignificant-figure accuracy is involved.
divisions
ized by act of congress
chains,
and also acres should
the U.S. and the British
The use of the metric
as dc-
m). This foot is called
statute
starch
tion to its former work in weights and measures, which included such allied fields as thermometry and the measof barometric
within
the foot defined in 1959 is Measurements expressed in
cally for scientific cal in commercial
urement
survey
while foot.
merits, is truly international. In recent years the scope of the work at the Intl. Bureau has been considerably broadened. It now carries on rein the fields of electricity
geodetic
to bear the relationship
with the Intl.
Metric Convention of May 20. 1875. At the bureau are kept the Intl. Prototype kilogram, many secondary standards of all sorts. and equipment for comparing standards and making
from
change
the U.S. survey foot, called the international
It established
The lntl. Bureau of Weights and Measures was established
continue
111. In 1959 a small
fined in 1893 (I ft equals 1200/3937
of Oct.
The Intl. Bureau of Weights and Measures
to 360013937
as being
the fundumcntai
In the metric
imperial
gallon.
which
is
of IO Ibtn of water. at a temperaby calculation, is equivalent to
cu in. At the same time, the bushel was rcdcfined
as 8 gal, In the British
system.
are the sdtne as those of liquid
the units of dry mcasurc muasurc.
In the U.S. these
two are not the same. the gallon and its subdivisions
being
PETROLEUM
I-70
used in the measurement
of liquids,
while the hushcl,
its subdivisions. is used in the measurement commodities. The U.S. gallon is divided
with
of certain dry into 4 liquid
One yard is defined exactly
equal
quarts and the U.S. bushel into 32 dry quarts. All the units
Mass
of capacity mentioned thus far are larger in the British system than in the U.S. system. But the British fluid ounce
The primary
is smaller
than the U.S.
fluid
ounce.
because the British
quart is divided into 40 fluid ounces. whereas the the U.S. quart is dlvlded into 32 fluid ounces. From the foregoing an avoirdupois
it is seen that in the British
ounce of water
at 62°F
system
has a volume
of
I fluid oz. because 10 Ibm is equivalent to I60 avoirdupois oz. and I gal is equivalent to 4 quarts, or 160 fluid oz. This convenient
relation
does not exist in the U.S.
ENGINEERING
as 0.9144
to 25.4
HANDBOOK
m. The inch is thcrcfore
mm.
standard
of mass for this country
is U.S.
Prototype Kilogram 20, which is a platinum-iridium cylinder kept at the Natl. Bureau of Standards. The value of this
mass standard
Prototype
Kilogram,
is known
in terms
a platinum-iridium
is kept at the Intl.
Bureau
of the Intl.
standard,
of Weights
which
and Measures.
The avoirdupois pound is defined in terms of the kilogram by the relation I avoirdupois lbm=0.453 592 37 kg.
sys-
weighs about
Mass vs. Weight. The mass of a body is a measure of
8% Ibm, or 133% avoirdupois oz, and the U.S. gallon is cquivalcnt to 4 X 32, or 128 fluid oz. In comparison.
its inertial property. The ,t~i#r of a body has in the past been used at times to designate its mass and at other times
I U.S. fluid oz=1.041 British fluid oz; I British fluid oz=O.961 U.S. fluid oz; 1 U.S. gal=0.833 British in-
to designate a force that is related to gravitational attraction. Because these two concepts of weight are incorn-
pcrial
patible, and have therefore resulted in confusion, the term “weight” should be avoided in technical practice except
tem because a U.S. gallon
gal: and I British
of water at 62°F
imperial
gal=
I.201
U.S.
gal.
under circumstances in which its meaning is completely clear. When the term is used, it is important to know
Subdivision of Units In general,
units are subdivided by one of three systems: into tenths; (2) duodecimal, into (I) decimal, i.e., twelfths; or (3) binary, into halves. Usually the subdivision is continued
by use of the same system.
Each method
has advantages for certain purposes, and it cannot properly be said that any one method is “best” unless the use to which the unit and its subdivisions are to be put is known.
See also Chapter As weighing
58.
and measuring
are important
if we are concerned
only
with measure-
ments of length to moderate precision, it is convenient to measure and to express these lengths in feet, inches, and binary
fractions
of an inch, thus 9 ft 4% in. If, how-
ever. these measured
lengths are to be used subsequently
in calculations of area or volume, that method of subdivision at once becomes extremely inconvenient. For that reason, engineers, instead of dividing the foot into inches and binary
subdivisions
of the inch,
divide
it decimally:
that is. into tenths, hundredths, and thousandths of a foot. The method of subdivision of a unit is thus made largely on the basis of convenience to the user. The fact that units have commonly been subdivided into certain subunits for centuries does not preclude their also having another mode of subdivision in some frequently used cases where conindicates
the gallon
the value of such other method.
is usually
subdivided
Thus
into quarts and pints, but
the majority of gasoline-measuring pumps of the pricecomputing type are graduated to show tenths of a gallon. Although the mile has for centuries been divided into rods,
tude of quantities
involved.
senses: (I) as a unit of weight. ity or volume. In the weight
in two distinct
and (2) as a unit of capac-
sense the term
means:
(I)
the shorr. or
rzet ton of 2,000 Ibm; (2) the long, ~KLKY, or .shipprr’.r ton of 2240 Ibm; (3) the n?~vic ton of 1000 kg, or 2204.6 Ibm. In the capacity sense “ton ” is restricted to uses related to ships. In the U.S. and Canada the ton (weight)
most commonly
used is the shortton, in Great Britain it is the /orzg ton, and in countries using the metric system it is the metric, ton.
Effect of Air Buoyancy. Another point to consider in the calibration and use of standards of mass is the buoyancy or lifting effect of the air. A body immersed in any fluid is buoyed up by a force equal to the force of gravity on the displaced fluid. Two bodies of equal mass. if placed one on each pan of an equal-arm balance. will balance each other in a vacuum.
A comparison
a known
gives “true
mass standard
yards, feet, and inches. the odometer part of an automobile speedometer indicates tenths of a mile. Although our dollar is divided into 100 parts, we habitually use and
er body
speak of halves
be buoyed
and quarters.
factors in our
everyday lives, it is quite natural that questions arise about the use of various units and terms and about the magniThe ton is used as a unit of measure
For example,
venience
whether mx~ orfbrw is intended and to use SI units properly by using kilograms for mass and newtons for force.
in a vacuum against mass.”
If compared
in air, however, they will not balance each other unless they are of equal volume. If of unequal volume, the larg-
smaller
will
displace
the greater
up by a greater
body,
force
and the larger
volume
of air and will
than will
body
will
than will
appear
the
to be of
less mass than the smaller body. The greater the difference in volume, and the greater the density of the air in
Standards Length
which
A specified
spectral
international
standard
line emitted on which
by krypton
all length
86 is the
measurements
the comparison
are based. To obtain a constant and uniform wavelength, krypton lamps are operated at the temperature of the triple
it is necessary the air density
point
reference.
of nitrogen.
weighing
is made, the greater
will
be the apparent difference in mass. For that reason. in assigning a precise numerical value of mass to a standard, to base this value on definite values for and the density of the mass standard of
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
1-71
& MEASURES
TABLE 1.41-LENGTH
EGUIVALENTS
Meters
Centimeters
Inches
Feet
Yards
Chains
1
100
39.37 i.59517
3.261 0.51598
1.0936 0.03886
0.04971 2.69644
0.001 3.00000
0.0,6214 6.79335
0.3937
0.03281 2.51598
0.01094 2.03886
0.0,4971 4.69644
10-5 5.00000
0.0,6214 4.79335
0.08333 2.92082
0.02770 2.44370
0.001263 3.10127
0.0,254 5.40483
0.0,1578 5.19818
(1.3333 1.52288
6.01515 2.18046
Q.Q,3048 4.48402
0.0,1894 4.27736
0.04545 2.65758
0.0,9144 4.96114
0.0,5682 4.75449
0.02012 2.30356
0.0125 2.09691
1
0.6214 i.79335
2.00000
1
0.01
1.59517
2.00000 0.0254 2.40483
2.540 0.40483
1
0.3048 1.48402
30.46 1.48402
12 1.07918
0.9144 1.96114
91.44
36 1.55630
3 0.47712
1
1.96114
20.12 1.30356
2012 3.30356
792 2.89873
66 1.81954
22 1.34242
1000 3.00000
100 000 5.00000
39,370 4.59517
3,281 3.51598
1,093.6 3.03886
1609
160 935
3.20665
5.20665
63,360 4.80182
5,280 3.72263
3.24551
Kilometers
49.71 1.69644 80 1.90309
1,760
Miles
1.609 0.20665
The equivalents are given in the bold-faced type. Logarithms of the equivalents are given immediatelybelow withthe characteristic of the logarithm(i.e., 1.59517 = 0.59517).Insome cases, theequivalentshave been rounded off,whtlethe logarithmcorresponds to the equivalentcarried to a greater number of decimal places. Subscripts afterany figure-O,, 9,-mean that that figureIS to be repeated the indicatednumber of times.
TABLE 1.42-CONVERSION Millimeters Feet Inches to to to Meters Inches Millimeters
Meters to Feet
Yards to Meters
Meters to Yards
Miles to Kilometers
Kilometers to Miles 0.6214 1.243 1.864 2.485
1 2 3 4
25.40 50.80 76.20 101.60
0.03937 0.07874 0.1181 0.1575
0.3048 0.6096 0.9144 1.219
3.281 6.562 9.842 13.12
0.9144 1.829 2.743 3.658
1.094 2.187 3.281 4.374
1.609 3.219 4.828 6.437
5 6 7 8
127.00 152.40 177.80 203.20 228.60
0.1968 0.2362 0.2756 0.3150 0.3543
1.524 1.829 2.134 2.438 2.743
16.40 19.68
4.572 5.486 6.401 7.315 8.230
5.468 6.562 7.655 8.749 9.842
8.047 9.656 11.27 12.87 14.48
9
‘For ewample,
The corrections Standards
(NBS)
22.97 26.25 29.53
furnished
by the U.S.
Natl.
Bureau of
for the more precise mass standards in vacuum
are
and compari-
son against normal brass standards in air under standard conditions. with no correction applied for the buoyant effect of the air.
By
density
kg per m3 at 0°C
of 8400
definition,
brass
standards
have a
and a coefficient
of
cubical thermal expansion of 0.000 054 per “C. Standard conditions are defined as air of I .2 kg per m3 and temof 20°C.
cise analytical of apparent
The corrections
weights
are ordinarily
mass against
3.107 3.728 4.350 4.971
5.592
1 I” = 25 40 mm
given on two bases: comparison
perature
OF LENGTHS’
normal
to be used with
pre-
given only in terms brass standards.
A full discussion
of this topic
is given
in NBS Mono-
graph (Nat].
133, Mass and Mass Values, by Paul E. Pontius Technical Information Service, 528.5 Port Royal
Road,
Springfield,
VA
22161;
COM
7450309).
Capacity Units of capacity. being derived units, are defined in the U.S. in terms of linear units and are not represented by fundamental constructed lidity
only
or indirectly
standards. Laboratory standards have been and are maintained at NBS. These have vaby calibration to the linear
with
reference
standards.
either
directly
l-72
PETROLEUM
TABLE 1.43-COMMON 64ths
Millimeters 64ths
1
0.397
2
0.794
3 4
Millimeters 64ths
Millimeters 64ths
Millimeters 64ths
1.191 1.588
5.159 5.556 5.953 6.350
25 26 27 28
9.922 10.319 10.716 11.113
37 38 39 40
14.684 15.081 15.478 i5.875
49 50 51 52
5 6 7 a
I ,984 2.381 2.770 3.175
17 18 19 20
6.747 7.144 7.541 7.938
29
11.509 11.906 12.303 12.700
41
30 31 32
42 43 44
16.272 16.669 17.066 17.463
53 54 55 56
9 10 11 12
3.572 3.969 4.366 4.763
21 22 23 24
8.334 8.731 9.I28 9.525
33 34 35 36
13.097 13.494 13.891 14.288
45 46 47 48
17.859 18.256 18.653 19.050
TABLE 1.44-DECIMALS 0
1
2
3
4
5
2.540 5.080 7.620 10.160
0.254 2.794 5.334 7.874 10.414
0.508 3.048 5.588 8.128 10.668
0.762 3.302 5.842 8.382 10.922
1.016 3.556 6.096 8.636 11.176
1.270 3.810 6.350 a.890 11.430
0.5 0.6 0.7 0.8 0.9
12.700 15.240 17.780 20.320 22.860
12.954 15.494 18.034 20.574 23.114
13.208 15.748 18.288 20.828 23.368
13.462 16.002 18.542 21.082 23.622
13.716 16.256 18.796 21.336 23.876
13.970 16.510 19.050 21.590 24.130
TABLE 1.4% -MILLIMETERS
a 9
Millimeters 64ths
6
19.844 20.241 20.638
22.622 23.019 23.416 23.813
21.034 21.431 21.828 22.225
61 62 63 64
24.209
7
8
9
11.684
i ,778 4.318 6.858 9.398 ii ,938
2.032 4.572 7.112 9.652 12.192
2.286 4.626 7.366 9.906 12.446
14.224 16.764 19.304 21 .a44 24.384
14.478 17.018 19.558 22.098 24.638
14.732 17.272 19.812 22.352 24.892
14.986
1.524 4.064 6.604 9.144
Millimeters
57 58 59 60
19.447
OF AN INCH TO MILLIMETERS (FROM 0.01 in. TO 0.99 in.)
0.0 0.1 0.2 0.3 0.4
5 6 7
HANDBOOK
FRACTIONS OF AN INCH TO MILLIMETERS (FROM ye4 to 1 in.)
13 14 15 16
0 1 2 3 4
ENGINEERING
17.526 20.066 22.606 25.146
TO DECIMALS OF AN INCH (FROM 1 TO 99 mm)
0.
1.
2.
3.
4.
5.
6.
7.
8.
9.
0.3937 0.7874 l.tatt 1.5748
0.0394 0.4331 0.8268 1.2205 1.6142
0.0787 0.4724 0.8661 1.2598 1.6535
0.1181 0.5118 0.9055 1.2992 1.6929
0.1575 0.5512 0.9449 1.3386 1.7323
0.1968 0.5906 0.9842 1.3780 1.7716
0.2362 0.6299 1.0236 1.4173 1.8110
0.2756 0.6693 1.0630 1.4567 1.8504
0.3150 0.7087 1.1024 1.4961 1.8898
0.3543 0.7480 1.1417 1.5354 1.9291
1.9685 2.3622 2.7559 3.1496 3.5433
2.0079 24016 2.7953 3 la90 3 5827
2.0472 2.4409 2.8346 3.2283 3.6220
2.0866 2.4803 2.8740 3.2677 3.6614
2.1260 2.5197 2.9134 3.3071 3.7008
2.1654 2.5590 2.9528 3.3464 3.7402
2.2047 2.5984 2.9921 3.3858 3.7795
2.2441 2.6378 3.0315 3.4252 3.8189
2.2835 2.6772 3.0709 3.4646 3.8583
2.3228 2.7165 3.1102 3.5039 3.8976
24.606 25.003 25.400
MATHEMATICAL
TABLES
& UNITS
& SYSTEMS
OF WEIGHTS
& MEASURES
l-73
TABLE1.46-AREAEQUIVALENTS' Square Mrles or Sections
Square Meters
Square Inches
Square Feet
Square Yards
Square Rods
Square Chains
Roods
Acres
1
1,550
10.76
1.196 0.07773
0.0395 2.59699
0.002471
0.0,9884
0.0,2471
3.39288
4.99494
4.39288
0.0,7716 4.88740
0.0,2551
0.0,1594
0.0,6377
0.0,1594
5.40667
6.20255
7.80461
7.20255
0.1111
0.003673 3.56503
0.0,2296
1.04576
4.36091
0:0,9184 5.96297
0.0,2296 5.36091
0.0,3587 8.55473
1
0.03306
0.002066
0.0,8264
0.0002066
0.0,3228
3.19033
0.0,6452 4.80967
1.03197
1
0.006944 3.84164
g.09290 2.96803
0.8361
144
1
2.15836
1,296
9
1.92227
3.11260
0.95424
25.29 1.40300
39,204 4.59333
272.25
30.25
2.43497
1.48072
404.7 2.60712
627,264 5.79745
4,356 3.63909
484 2.68484
2.51927
1
16
3.31515
4.91721
4.31515
0.0625
g.02500
0.00625
2.79588
2.39794
3.79588
1
1.20412
0.0,2491 10.39637
7.50898
0.0,9766 6.98970
0.4
0.1
0.0001562
1 .ooooo
4.19382
1
0.25 1.39794
0.0,3906 4.59176
0.001562
1012
1,568,160
10,890
1,210
40
2.5
6.19539
4.03703
3.08278
1.60206
0.39794
4047 3.60712
6,272,640
43,560
4,840
4.63909
3.68484
160 2.20412
1 .ooooo
4 0.60206
1
6.79745
27,878,400 7.44527
3,097,600 6.49102
102,400 5.01030
6,400 3.80618
2,560 3.40824
640 2.80618
2 589 998 6.41330
7.58670
1.60206
3.00506
IO
0.0,3861
3.19382 1
The equivalentsare given in the bold-facedtype Logarithms of the equivalentsare given immediately below with the characteristic of the logarithm(i.e., 2.59699 = 0.059699). In some cases, the equivalentshave been rounded off,whrfe the logarithmcorresponds to the equivalentcarriedto a greaternumber of decimal places.Subscriptsafterany figure-O,, 9,, etc.-mean that the figureis to be repeated the Indicatednumber of times. '1 heclare=
100 acres=10
000 mp
TABLEl.47-VOLUME
Liters 1
AND CAPACITY EQUIVALENTS
Cubic Inches
Cubic Feet
Cubic Yards
U.S. Apothecary Fluid Ounces
61.03 1.78551
0.03532 2.54796
0.001308 3.11659
1.52909
0.0,5787 4.76246
0.0,2143 5.33109
0.5541 1.74360
0.03704 2.56864
0.01639 2.21450
U.S. Quarts Drv
U.S. Gallons
u.s Bushels
1.057 0.02394
0.9081 i .95812
0.2642 1.42188
0.02838 2.45297
0.01732 2.23845
0.01488 2.17263
0.0 24329 3.63639
0.0,4650 4.66746
29.92 1.47599
25.71
7.481
2.98114
1.41017
0.87393
0.8036 1.90502
25853 4.41251
807.9 2.90736
694.3
2.84153
202.2 2.30530
21.70 1.33638
1
0.03125 2.49485
6.02686 2.42903
0.007812 3.89279
0.0,8392 4.92388
0.8594 i .9341a
0.25 1.39794
0.02686 2.42903
0.2909 1.46376
0.03125 2.49485
33.81
28.32 1.45205
1728 3.23754
1
764.5 2.88340
46656 4.66891
27 1.43136
0.02957 2.47091
1.805
0.001044
0.25640
3.01886
5.58749
0.9463 1.97604
67.75 1.76155
0.03342 2.52401
0.001238 3.09264
32 1.50515
1
1.101 0.04188
67.20 1.82737
0.03889
0.001440
2.58983
3.15847
37.24 1.57097
1.164 0.06582
3.785 0.57812
231 2.36361
0.1337
0.004951
1.12607
3.69470
128 2.10721
4 0.60206
3.437 0.53624
35.24 1.54703
2150 3.33252
1.244
0.04609
1192
37.24
0.09498
2.66362
3.07612
1.57097
32 1.50515
1
0.0,3868
957.5
Liquid
0.1074 1.03109 9.309 0.96891
The equivalentsare given in the bold-faced type. Logarithms of the equivalentsare given immediately below with the characteristic of the logarithm(i.e., 2.54796 =0.054796). In some cases, the equivalentshave been rounded off,while the logarithmcorresponds to the equivalentcarriedto a greater number of decimal places, Subscriptsafterany figure-O,, 9,, etc.-mean that the figureis to be repeated the indicatednumber of times.
PETROLEUM
l-74
TABLE sq In. t0
cm2
sq ft
t0
j.yz
so tn.
6.452 12.90 19.35 25.81 32.26 38.71 45.16 51.61 58.06 ‘For example.
cm’
0.1550 0.3100 0.4650 0.6200 0.7750 0.9300 1.085 1.240 1.395
0.0929 0.1858 0.2787 0.3716 0.4645 0.5574 0.6503 0.7432 0.8361
mL to sa ft
sq Yd
10.76 21.53 32.29 43.06 53.82 64.58 75.35 86.11 96.87
0.8361 1.672 2.508 3.345 4 181 5.017 5.853 6 689 7 525
OF AREAS* km’ hectares sq miles acres to to to to km’ acres sq miles hectares
m’ to
3
HANDBOOK
sq yd
2.471 4.942 7.413 9.884 12.355 14.826 17.297 19.768 22.239
0.4047 0.8094 1.214 1.619 2.023 2.428 2.833 3.237 3.642
1.196 2.392 3.588 4.784 5.980 7.176 8.372 9.568 10.764
2.590 5.180 7.770 10.360 12.950 15.540 18.130 20.720 23.310
0.3861 0.7722 1.158 1.544 1.931 2.317 2.703 3.089 3.475
1 sq in =6 452 cm2
TABLE
1 2 3 4 5 6 7 8 9
1.48-CONVERSION
ENGINEERING
1.49-CONVERSION
C” I”. to cm3
cm3 to cu tn.
cu ft
16.39 32.77 49.16 65.55 81.94 98.32 114.7 131.1 147.5
0.06102 0.1220 0.1831 0.2441 0.3051 0.3661 0.4272 0.4882 0.5492
0.02832 0.05663 0.08495 0.1133 0.1416 0 1699 0 1982 0 2265 0.2549
TABLE
Fluid oz to cm3
cm3 to fluid oz
29.57 59.15 88.72 118.3 147.9 177.4 207.0 236.6 266.2
0.03381 0.06763 0.1014 0.1353 0.1691 0.2092 0.2367 0.2705 0.3043
liquid pints to liters 0.4732 0.9463 1.420 1.893 2.366 2.839 3.312 3.765
4.259
;a
OF VOLUMES m3 to cu ft
cu yd
35 31 70.63 105.9 141.3 176.6 211.9 247.2 282.5 317.8
0.7646 1.529 2.294 3.058 3.823 4.587 5.352 6.116 6.881
1.50-CONVERSION
0 9463 1.893 2.839 3.785 4.732 5.678 6.624 7.571 8.517
CUBIC
MEASURES
m3 to cu vd
gal to cu ft
1.308 2.616 3.924 5.232 6.540 7.848 9.156 10.46 11.77
0.1337 0 2674 0.4010 0 5347 0.6684 0.8021 0.9358 1.069 1.203
;3
OF VOLUMES
liters lrqurd liters to quarts to liquid liqurd to pints liters quarts 2.113 4.227 6.340 8.454 10.57 12.68 14.79 16.91 19.02
OR
gal to liters
1.0573.785 2.113 7.571 3.170 11.36 4.227 15.14 5.284 la93 6.340 22.71 7.397 26.50 8.454 30.28 9.510 34.07
OR
gal
gal 7.481 14.96 22.44 29.92 37.40 44 88 52.36 59.84 67.32
CAPACITIES
liters to 0.2642 0.5284 0.7925 1.057 1.321 1.585 i .a49 2.113 2.378
cu ft to
bushels hectoliters to to hectoliters bushels 0.3524 0.7048 1.057 1.410 1.762 2.114 2.467 2.819 3.171
2.838 5.676 8.513 11.35 14.19 17.03 19.86 22.70 25.54
MATHEMATICAL
TABLES
8 UNITS 8 SYSTEMS
OF WEIGHTS
TABLE
& MEASURES
1.51--MASS
EQUIVALENTS
tons
Ibm
OZ
ka
grains
troy and apothecary
avoirdupois
troy and apothecary
1
15,432 4.18843
32.15 1.50719
35.27 1.54745
2.6792 0.42801
0.0,2083 3.31876
0.0,2286 3.35902
0.0,1736
4.23958
1
1.09714 0.04026
0.9115
0.0,6480 581157
I-75
avoirdupots 2.205 0.34333
long
metric
0.0,1102 3.04230
0.0,9842 4.99309
0.001 3.00000
4.15490
0.0,7143 a.85387
0.0,6378 8.80465
0.0,6480 8.81157
0.08333 2.92082
0.06857 2.83614
0.0,3429 5.53511
0.0,3061 5.48590
0.0,3110 5.49281
1
0.07595 2.88056
0.0625 2.79588
0.0,3125 5.49485
0.0,2790 5 44563
0.0,2835 5.45255
1
0.8229 1.91532
0.0,4114
4.61429
0.0,3673 4.56508
0.0,3732 4.57199
0.0,1429
0.03110 2.49281
480 2.68124
0.02835 2.45255
437.5 2.64098
1.95974
0.3732 1.57199
5,760 3.76042
12
13.17
1 07918
1.11944
0.4536 1.65667
7,000 3.84510
14.58 1 .I6386
16 1.20412
1.215 0.08468
1
0.0005 4.69897
0.0,4464 4.64975
0.0,4536 4.65667
907.2 2.95770
140,
29,167
3.38571
2,000 3.30103
1
4.46489
320, 4.50515
2431
7.14613
0.8929 1.95078
0.9072 1.95770
1016 3.00691
15680, 7.19535
32,667 4.51411
35,840 4.55437
2722 3.43492
2,240 3.35025
1.12 0.04922
15,432,356
32,151 4.50719
35,274 4.54745
2679 3.42801
2,205 3.34333
1.102
0.9842
0.04230
1.99309
1000
3.00000
7.18843
1.016 0.00691 1
The equivalentsare given in the bold-facedtype. Logarithms of the equivalentsare given immediately below with the characteristic of the logarithm(i.e., 3.04230 =0.0004230). In some cases, the equivalentshave been rounded off,while the logarithmcorresponds to the equivalentcarriedto a greaternumber of decimal places.Subscriptsafterany figure-O,, 9,, etc.-mean that the figureis to be repeated the indicatednumber of times.
TABLE
Ibm (avordupots) to kg
kg
1.52-CONVERSION
OF MASSES
oz grams lavorrdupois) IO to oz grams (avoirdupois)
short
metric
tons
tons
(2.000lbn1)
(1000 kg) t0
to
grams
lbm
gmns 10
(avo~rdupo!sj
grams
gram
04536
2 205
0 06480
1543
28 35
003527
0 907
0 9072
4409
0 1296
3086
5670
007055
1 a14
1361 1814
6614
0 1944 0 2592
4630
a5 05
0 1058
2 722
<