PCs THE MISSING MANUAL
Andy Rathbone
Beijing • Cambridge • Farnham • Köln • Paris • Sebastopol • Taipei • Tokyo
PCs: The Missing Manual by Andy Rathbone Copyright © 2006 O’Reilly Media, Inc. All rights reserved. Printed in the United States of America. Published by O’Reilly Media, Inc., 1005 Gravenstein Highway North, Sebastopol, CA 95472. O’Reilly books may be purchased for educational, business, or sales promotional use. Online editions are also available for most titles (safari.oreilly.com). For more information, contact our corporate/institutional sales department: (800) 998-9938 or
[email protected].
Printing History: December 2005:
First Edition.
Nutshell Handbook, the Nutshell Handbook logo, and the O’Reilly logo are registered trademarks of O’Reilly Media, Inc. PCs: The Missing Manual, The Missing Manual logo, Pogue Press, the Pogue Press logo, and “The book that should have been in the box” are trademarks of O’Reilly Media, Inc. Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this book, and O’Reilly Media, Inc. was aware of a trademark claim, the designations have been printed in caps or initial caps. While every precaution has been taken in the preparation of this book, the publisher and author assume no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein.
This book uses RepKover™, a durable and flexible lay-flat binding. ISBN: 0-596-10093-0 [M]
[3/06]
Table of Contents
The Missing Credits ................................................................................... ix Introduction................................................................................................. 1
Part One: Your PC’s Main Parts Chapter 1: Inside Your PC.......................................................................... 7 Finding Out Your PC’s Horsepower ..........................................................................................................8 The PC’s Case ........................................................................................................................................... 10 Opening Your PC’s Case ......................................................................................................................... 12 Motherboard ............................................................................................................................................. 16 CPU (Central Processing Unit) ............................................................................................................... 16 Adding Memory (aka RAM) .................................................................................................................... 18 Installing Expansion Cards ...................................................................................................................... 25 Ports ........................................................................................................................................................... 32 Power Supply and Battery ...................................................................................................................... 47
Chapter 2: Keyboards and Mice .............................................................. 57 Keyboard Basics ....................................................................................................................................... 57 Mouse Basics ............................................................................................................................................ 71 Game Controllers ..................................................................................................................................... 80
Chapter 3: Monitors and Video ............................................................... 83 Monitor Basics .......................................................................................................................................... 84 Installing a Monitor .................................................................................................................................. 88
iii
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Plugging Two Monitors into One PC ..................................................................................................... 89 Plugging Two PCs into One Monitor ..................................................................................................... 93 Using TV Sets as Monitors ....................................................................................................................... 94 Watching TV on a PC ............................................................................................................................... 99 Troubleshooting Your Monitor ............................................................................................................. 100 Video Card (aka Display Adapter) ....................................................................................................... 104
Chapter 4: Printers ................................................................................. 113 Printer Basics ........................................................................................................................................... 113 Installing a Printer .................................................................................................................................. 119 Choosing Printer Paper ......................................................................................................................... 126 Adjusting Printer Settings ...................................................................................................................... 129 Printing Envelopes .................................................................................................................................. 131 Printing Specialized Items ..................................................................................................................... 132 Printing Digital Photos Professionally .................................................................................................. 135 Printing Digital Photos on an Inkjet Printer ........................................................................................ 138 Printing Web Pages ................................................................................................................................ 141 Printer Troubleshooting ........................................................................................................................ 142
Part Two: Multimedia Chapter 5: Digital Cameras, Camcorders, and Webcams.................... 147 Digital Camera Basics ............................................................................................................................ 148 Moving Pictures from Camera to Computer ...................................................................................... 148 Moving Pictures from a Card Reader to a PC ..................................................................................... 152 Viewing and Editing Photos .................................................................................................................. 153 Sharing Photos with Friends ................................................................................................................. 158 Troubleshooting Digital Cameras ........................................................................................................ 162 Camcorder Basics ................................................................................................................................... 164 Connect the Camcorder to Your PC .................................................................................................... 164 Editing Video ........................................................................................................................................... 167 Editing with Movie Maker ..................................................................................................................... 171 Webcams ................................................................................................................................................. 176
Chapter 6: Scanners................................................................................ 183 Choosing a Scanner ............................................................................................................................... 183 Installing a Scanner ................................................................................................................................ 184 Three Ways to Scan an Image .............................................................................................................. 186 Using Windows Scanner and Camera Wizard ................................................................................... 188 Digitizing Old Photos and Slides .......................................................................................................... 194 Troubleshooting Scanners .................................................................................................................... 195
Chapter 7: Sound .................................................................................... 199 Understanding Sound Adapters (Sound Cards) ................................................................................ 199 Sending Sound into and out of Your PC ............................................................................................. 203
iv
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Choosing Music File Formats ............................................................................................................... 213 PC Music for Musicians ......................................................................................................................... 215 Troubleshooting Sound ......................................................................................................................... 218
Chapter 8: Digital Music Players ........................................................... 223 Choosing a Digital Music Player .......................................................................................................... 223 Your Digital Player and Your PC .......................................................................................................... 226 iPod and iTunes ...................................................................................................................................... 227 Windows XP’s Media Player ................................................................................................................. 239 Troubleshooting Digital Music Players ................................................................................................ 247
Part Three: Storing Information Chapter 9: Hard Drives and Floppy Drives........................................... 253 Your PC’s Drives: An Overview ............................................................................................................ 253 Hard Drives: An Introduction ............................................................................................................... 255 Your Hard Drive’s Available Space ...................................................................................................... 256 Removing Unused Programs and Files ............................................................................................... 256 Speeding Up a Hard Drive .................................................................................................................... 260 Installing a Hard Drive ........................................................................................................................... 262 Troubleshooting Hard Drives ............................................................................................................... 274 Floppy Drives: An Introduction ............................................................................................................ 277 Formatting a Floppy Disk ...................................................................................................................... 278 Installing a Floppy Drive ....................................................................................................................... 278
Chapter 10: CD and DVD Drives ............................................................ 281 CDs: An Introduction ............................................................................................................................. 281 Playing CDs ............................................................................................................................................. 282 Buying the Right Type of Blank CD ...................................................................................................... 283 Ripping CDs ............................................................................................................................................. 286 Burning CDs ............................................................................................................................................ 289 Duplicating CDs ...................................................................................................................................... 298 Erasing CDs ............................................................................................................................................. 299 DVDs: An Introduction ........................................................................................................................... 300 Playing DVD Movies ............................................................................................................................... 301 Buying the Right Type of Blank DVD ................................................................................................... 302 Specialty Disc Formats .......................................................................................................................... 304 Ripping DVDs .......................................................................................................................................... 305 Burning DVDs ......................................................................................................................................... 305 Buying a CD or DVD Drive .................................................................................................................... 307 Installing a CD or DVD Drive ................................................................................................................ 308 Troubleshooting CD and DVD Drives .................................................................................................. 312
Table of Contents PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
v
Part Four: Talking to the World Chapter 11: Getting Online .....................................................................317 Different Ways to Connect to the Internet .......................................................................................... 317 Setting Up a Modem .............................................................................................................................. 324 Subscribing to an Internet Service ....................................................................................................... 327 Setting Up an Internet Connection ...................................................................................................... 330 Dialing into the Internet ........................................................................................................................ 335 Troubleshooting Online Connections .................................................................................................. 339
Chapter 12: Email....................................................................................343 Choosing an Email Program ................................................................................................................. 343 Setting Up Outlook Express .................................................................................................................. 352 Composing and Sending Email ............................................................................................................ 355 Reading and Processing Email .............................................................................................................. 362 Managing Your Address Book .............................................................................................................. 368 Email Etiquette ........................................................................................................................................ 370 Troubleshooting Email Problems ......................................................................................................... 372
Chapter 13: Surfing the Web ................................................................. 375 Choosing and Setting Up a Browser .................................................................................................... 375 Managing Forms and Passwords ......................................................................................................... 384 Blocking Pop-up Ads and Other Nuisances ........................................................................................ 387 Browsing the Web .................................................................................................................................. 388 Viewing RSS Feeds ................................................................................................................................. 401
Chapter 14: Networking .........................................................................403 Choosing a Network .............................................................................................................................. 404 Networking Hardware: What You Need ............................................................................................. 409 Setting Up a Simple Home Network .................................................................................................... 414 The Network Setup Wizard ................................................................................................................... 419 Securing Your Network ......................................................................................................................... 425 Sharing an Internet Connection ........................................................................................................... 435 Sharing Printers ...................................................................................................................................... 437 Exchanging Files Between PCs .............................................................................................................. 439 Sharing Monitors .................................................................................................................................... 447 Networking Two PCs .............................................................................................................................. 448 Troubleshooting Network Problems ................................................................................................... 458
Part Five: Maintenance, Security, and Troubleshooting Chapter 15: Security ...............................................................................463 Backing Up Your Computer .................................................................................................................. 463 Creating Passwords ................................................................................................................................ 475 Activating Windows Update .................................................................................................................. 478
vi
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Preventing Theft ..................................................................................................................................... 481 Phishing ................................................................................................................................................... 481 Adware, Spyware, and Other Threats ................................................................................................. 482 Installing a Firewall ................................................................................................................................ 490
Chapter 16: Fixing Common Problems .................................................495 Undeleting Deleted Files ....................................................................................................................... 495 Quitting Frozen Programs ..................................................................................................................... 497 System Restore ....................................................................................................................................... 497 Resetting Windows XP Passwords ....................................................................................................... 501 Troubleshooting Driver Problems ....................................................................................................... 503 Speeding Up a Slow PC ......................................................................................................................... 518 Windows Activation ............................................................................................................................... 519 Windows’ Troubleshooters ................................................................................................................... 520
Chapter 17: Advanced Troubleshooting................................................ 521 Watching Your PC Start ......................................................................................................................... 522 Editing the BIOS Settings ....................................................................................................................... 525 Replacing Firmware ............................................................................................................................... 533 Searching for Clues with Google ......................................................................................................... 534 Reverting to Old Programs ................................................................................................................... 535 Swapping Parts ....................................................................................................................................... 536 Microsoft’s Knowledge Base ................................................................................................................ 536 Last Resort: Data Grabs with Knoppix ................................................................................................. 538
Part Six: Appendices Appendix A: Setting Up a PC .................................................................543 Appendix B: Memory Cards and USB Drives.............................. online at www.missingmanuals.com/cds Appendix C: Other Cool Things You Can Do Online................... online at www.missingmanuals.com/cds Appendix D: Dealing with Technical Support ............................. online at www.missingmanuals.com/cds Appendix E: Packing a Laptop Bag .............................................. online at www.missingmanuals.com/cds Index ........................................................................................................ 551
Table of Contents PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
vii
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
The Missing Credits About the Author Andy Rathbone started geeking around with computers in 1985 when he bought a 26-pound portable CP/M Kaypro 2X. Like other nerds of the day, he soon began playing with null-modem adapters, dialing computer bulletin boards, and working parttime at Radio Shack. He wrote articles for various techie publications before moving to computer books in 1992. He’s written the Windows For Dummies series, Upgrading and Fixing PCs for Dummies, TiVo for Dummies, and many other computer books. Today, he has more than 15 million copies of his books in print, and they’ve been translated into more than 30 languages. Andy can be reached at his Web site, www.andyrathbone.com.
About the Creative Team Peter Meyers (editor) works as an editor at O’Reilly Media on the Missing Manual series. He lives with his wife in New York City. Email:
[email protected]. Sarah Milstein (editor) is O’Reilly’s senior editor for Missing Manuals. She’s pleased to finally understand that “1394” really means “FireWire.” Email: milstein@oreilly. com. Carla Spoon (copy editor) is a freelance writer, editor, and proofreader. She works and feeds her tech gadget addiction from her home office in the shadow of Mount Rainier. Email:
[email protected]. Web: www.carlaspoon.com. Jim Aspinwall (technical reviewer) is a PC deployment project manager and consultant, and the author of several PC articles and books including PC Hacks, published by O’Reilly. Email:
[email protected]. Rob Bourns (technical reviewer) first learned about electronics in the Marines when he worked as a Ground Radio Repairman. He now works as a Splicing Technician for the phone company. He has lived in Sebastopol, California most of his life. Email:
[email protected].
ix
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Andy Carciere (technical reviewer) served for 25 years as a school administrator. During those years he championed the use of technology as a tool to enhance learning. Andy currently consults with districts and schools on the administrative and instructional use of technology to improve the teaching and learning process. Email:
[email protected]. Justin Watt (technical reviewer) is currently a senior web producer for O’Reilly Media, Inc.’s Online Publishing Group. He blogs at justinsomnia.org, where you can read about his adventures in Northern California. Email:
[email protected]. Rose Cassano (cover illustration) has worked as an independent designer and illustrator for 20 years. Assignments have ranged from the nonprofit sector to corporate clientele. She lives in beautiful Southern Oregon, grateful for the miracles of modern technology that make working there a reality. Email:
[email protected]. Web: www.rosecassano.com.
Acknowledgements Thanks to Matt Wagner for making this book possible, to my beautiful wife Tina Rathbone for editing each chapter before submission, to Sarah Milstein for helping create a detailed outline, and to Peter Meyers for whipping the book into shape.
The Missing Manual Series Missing Manuals are witty, superbly written guides to computer products that don’t come with printed manuals (which is just about all of them). Each book features a handcrafted index; cross-references to specific page numbers (not just “see Chapter 14”); and RepKover, a detached-spine binding that lets the book lie perfectly flat without the assistance of weights or cinder blocks. Recent and upcoming titles include: Access for Starters: The Missing Manual by Kate Chase and Scott Palmer AppleScript: The Missing Manual by Adam Goldstein AppleWorks 6: The Missing Manual by Jim Elferdink and David Reynolds Creating Web Sites: The Missing Manual by Matthew MacDonald eBay: The Missing Manual by Nancy Conner Dreamweaver 8: The Missing Manual by David McFarland Excel: The Missing Manual by Matthew MacDonald Excel for Starters: The Missing Manual by Matthew MacDonald FileMaker Pro 8: The Missing Manual by Geoff Coffey and Susan Prosser
x
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
FrontPage 2003: The Missing Manual by Jessica Mantaro GarageBand 2: The Missing Manual by David Pogue Google: The Missing Manual, Second Edition by Sarah Milstein and Rael Dornfest Home Networking: The Missing Manual by Scott Lowe iLife ‘05: The Missing Manual by David Pogue iMovie HD & iDVD 5: The Missing Manual by David Pogue iPhoto 5: The Missing Manual by David Pogue iPod & iTunes: The Missing Manual, Third Edition by Jude Biersdorfer iWork ‘05: The Missing Manual by Jim Elferdink Mac OS X Power Hound, Panther Edition by Rob Griffitths Mac OS X: The Missing Manual, Tiger Edition by David Pogue Office 2004 for Macintosh: The Missing Manual by Mark H. Walker and Franklin Tessler Photoshop Elements 4: The Missing Manual by Barbara Brundage QuickBooks: The Missing Manual by Bonnie Biafore Quicken for Starters: The Missing Manual by Bonnie Biafore Switching to the Mac: The Missing Manual, Tiger Edition by David Pogue and Adam Goldstein Windows 2000 Pro: The Missing Manual by Sharon Crawford Windows XP Power Hound by Preston Gralla Windows XP for Starters: The Missing Manual by David Pogue Windows XP Home Edition: The Missing Manual, Second Edition by David Pogue Windows XP Pro: The Missing Manual, Second Edition by David Pogue, Craig Zacker, and Linda Zacker
The Missing Credits PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
xi
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Introduction
In January 1983, Time magazine featured a PC on the cover as its “Man of the Year.” The accompanying article quoted a then-recent advertisement describing why everybody needs one: “A PC can send letters at the speed of light, diagnose a sick poodle, custom-tailor an insurance program in minutes, and test recipes for beer.” Nearly 25 years later, email arrives within minutes, not microseconds (that is, as long as the messages aren’t trapped by a spam or virus filter). Veterinarians still diagnose poodles by looking in their ears, programmers do the grunt work to tally your insurance premium, and most people prefer testing their own beer recipes, thank you very much. In short, the personal computer has not quite lived up to its early hype. One major culprit? The modern PC has grown so complicated that most people treat it as a necessary nuisance that performs a few simple tasks, but rarely with grace. Instead of an exciting liberator, the machine’s become a clumsy commodity, like an old VCR that mostly manages to record your show, but never quite displays the correct time. That’s where this book comes in. In clear, jargon-free language, it helps you perform the many basic computing tasks that have grown complex, complicated, or just plain annoying: • Finding an Internet provider, and setting up your PC so you can browse the Web, send email, and share the Internet connection with other PCs in your home.
1
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Introduction
• Buying and configuring a wireless network so the signal reaches everywhere in your apartment or home—including the back porch. • Buying and installing those long black strips of silicon, called memory, so your old workhorse of a PC can keep up with your need for speed. • Replacing or upgrading your computer’s innards, including its hard drive, CD/DVD drive, mouse, keyboard, power supply, and so on. • Printing all or parts of a Web page so it doesn’t run off the paper’s right edge. • Buying the right memory card for your digital camera, and then printing your photos, emailing them to a friend, or posting them to a photo-sharing Web site. • Recording your old records onto your PC so you can turn them into CDs. • Transferring your home movies to your computer, editing them with Windows Movie Maker, and copying the result to a DVD. • Setting up an automatic backup system for your PC’s files and settings. • Moving your old PC’s files to your new PC. • Locating, removing, and avoiding spyware and viruses. • Sharing one monitor between two PCs or connecting two monitors to one PC. • Creating quick and easy-to-set-up two-PC networks for home or when you’re on the road.
About This Book The underlying mechanics behind contraptions like a wine press, a stapler, and the hula hoop haven’t changed much through the years. In contrast, PC manufacturers, and a certain operating system developer in Redmond, Washington, never stop tinkering with what a computer can do. As a result, your PC is a ragtag assemblage of new parts, old parts, and obsolete parts left in to keep last month’s software still working. Yet one feature has grown consistently worse with each new computer model: documentation. Most PCs arrive with a single page of printed setup instructions, usually with lots of large arrows pointing, Twister-style, in geometrically confusing directions. To learn about the hundreds of features on your PC, you’re stuck with trial and error. Some PCs come with built-in help menus, but they suddenly disappear when you need them the most: when your PC won’t start. The purpose of this book, then, is to serve as the manual that should have been in the box. In this book’s pages, you’ll find step-by-step instructions for using every part of your PC, letting you fine-tune the tasks you’re familiar with, figure out the ones you’d only heard of, and learn about the ones you didn’t know you needed— until now.
2
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
PCs: The Missing Manual is designed to accommodate readers at every technical level. The primary discussions are written for advanced-beginner or intermediate computer users. But if you’re a first-timer, special sidebar articles called “Up to Speed” provide the introductory information you need to understand the topic at hand. If you’re a seasoned veteran, on the other hand, keep your eye out for similar shaded boxes called “Power Users’ Clinic.” They offer more technical tips, tricks, and shortcuts for the experienced computer fan.
Introduction
Assumptions This book makes three basic assumptions about you. First, it assumes you’ve got Windows XP installed on an IBM-compatible PC (meaning a computer not named “Apple” or “Macintosh”). The book tosses in a morsel or two of information about Linux, a competing operating system, but only as a last resort to resuscitate a PC when Windows XP has grown too faint to revive. (To confirm you’ve got Windows XP, rather than some earlier Windows variant, click the Start menu, right-click My Computer, and then choose Properties. Your Windows version appears in the System area of the Properties window.) Tip: Still on the fence about which PC to buy? Or thinking about trading up for a new machine? Check out the handy, semi-annual PC buying guide, written by the Wall Street Journal’s tech expert, Walter Mossberg. You can find the latest one online at http://ptech.wsj.com/archive/ptech-20051013.html.
Next, you should be reasonably familiar with Windows XP’s very basics: how to open and close windows, for instance, and how to navigate to folders and open them. Here’s a very quick primer on a few terms and concepts that you’ll frequently bump up against in your computing life: • Clicking. This book gives you three kinds of instructions that require you to use your computer’s mouse or trackpad. To click means to point the arrow cursor at something on the screen and then—without moving the cursor at all—to press and release the clicker button on the mouse (or laptop trackpad). To doubleclick, of course, means to click twice in rapid succession, again without moving the cursor at all. And to drag means to move the cursor while continuously pressing the button. • Keyboard shortcuts. Every time you take your hand off the keyboard to move the mouse, you lose time and potentially disrupt your creative flow. That’s why many experienced computer fans use keystroke combinations instead of menu commands wherever possible. Ctrl+Z, for example, is a keyboard shortcut for undoing your last action in Windows (and most Windows programs). When you see a shortcut like Ctrl+S (which saves changes to the current document), it’s telling you to hold down the Ctrl key and, while it’s down, to type the letter S and then release both keys.
Introduction PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
3
Introduction
Note: In order to cut down on the number of clicks you have to endure when adjusting various settings on your PC, do yourself a favor and switch your Control Panel window from Category View to Classic View. Choose Start ➝ Control Panel and then click “Switch to Classic View” from the task pane along the Control Panel’s left side. That displays all the Control Panel icons whenever you visit this all-important command center.
Finally, this book assumes you’re not going to try to absorb all the information it contains. It’s a manual you can reach for on the bookshelf or in the glove compartment during your time of need, and then close back up when the engine starts, the flat’s repaired, or you’ve found the place to pour the windshield wiper fluid.
About ➝ These ➝ Arrows Throughout this book, and throughout the Missing Manual series, you’ll find sentences like this one: “Click Start ➝ All Programs ➝ Accessories ➝ Calculator.” That’s shorthand for a much longer instruction that directs you to click the Start button to open the Start menu. Then choose All Programs. From there, click Accessories and then click the Calculator icon. Similarly, this kind of arrow shorthand helps to simplify the business of choosing commands in menus, as shown in Figure I-1. Figure I-1: In this book, arrow notations help simplify folder and menu instructions. For example, “Right-click the selected files and choose Send To ➝ CD Drive” is a more compact way of saying: “Right-click the selected items. When the shortcut menu appears, click Send To, and then slide to the right and choose CD Drive.”
About the Outline PCs: The Missing Manual is divided into five sections, each containing several chapters:
4
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• Part 1, Your PC’s Main Parts, covers everything inside or connected to your PC. You’ll learn how to find out what’s in your PC without opening its case, as well as how to deal with the dusty parts inside if you need to. You’ll also learn how to diagnose and identify broken parts, and buy new parts to replace those that are ailing. You’ll find out everything you need to know about connecting keyboards, mice, monitors, video cards, and printers, as well as putting them to work, and fixing them when they refuse to perform.
Introduction
• Part 2, Multimedia, explains how your PC handles sound, photos, and movies, and how it works in conjunction with digital cameras, camcorders, Webcams, scanners, MP3 players, TVs, and similar gadgetry. You’ll learn how to connect these devices to your PC, transfer their contents, and do things like create playlists of favorite songs and edit your home movies into finished creations. • Part 3, Storing Information, covers your PC’s storage tanks otherwise known as drives: hard, floppy, CD, and DVD, as well as flash drives and the tiny memory cards found mostly in digital cameras. You’ll learn how to install each type of drive, and how to create custom-made CDs and DVDs. • Part 4, Talking to the World, lets you accomplish that very task, thanks to your PC and a few helpers. You’ll learn how to find an Internet provider, enter its settings into Windows XP, and start sending email or instant messages. You’ll also learn all about choosing a Web browser, visiting Web sites, and making Internet-based phone calls. To communicate with other computers you might own (to exchange files or to share an Internet connection, for example), you’ll find out how to set up a network of two or more PCs. • Part 5, Maintenance, Security, and Troubleshooting, shows you how to keep your PC running smoothly and ensure your work stays safe. You’ll learn troubleshooting tactics, how to remove viruses and spyware, and about other mundane, but sometimes necessary, PC chores.
About MissingManuals.com At the www.missingmanuals.com Web site, you’ll find articles, tips, and updates to the book. In fact, you’re invited and encouraged to submit such corrections and updates yourself. In an effort to keep the book as up to date and accurate as possible, each time we print more copies of this book, we’ll make any confirmed corrections you’ve suggested. We’ll also note such changes on the Web site, so that you can mark important corrections into your own copy of the book, if you like. (Click the book’s name, and then click the Errata link, to see the changes.) While you’re at the Missing Manuals Web site, feel free to download a few appendices that didn’t fit into this book. Here’s what you’ll find, all free for the download.
Introduction PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
5
Introduction
• Memory Cards and USB Drives. Digital cameras store your snapshots onto tiny memory cards, little postage-stamp-sized plastic doodads. This appendix explains the different types of memory cards and USB drives you’re likely to encounter, how to tell them apart, which ones you need, and how to save and retrieve information to and from them. Check out the “USB Drive Travel Kit” section, which lists the most useful free and small programs that fit on USB drives, ready to save the day. • Other Cool Things You Can Do Online. This appendix covers some of the many fringe benefits you get with an Internet-connected PC: sending and receiving faxes, gambling online, playing games against others, printing directions for your next road trip, sending greeting cards, sending and receiving instant messages, creating and maintaining your own Web site, and dialing up long-distance friends with the Web’s newest darling, Internet-based phone calls. • Dealing with Technical Support. Before picking up the phone and making that dreaded call, be sure to read this appendix. It explains what to prepare in advance, so that your conversation is as smooth and as helpful as possible. And, if you’re lucky, some of the alternative tech support options listed might keep you from picking up the phone at all. • Packing a Laptop Bag. Keep a printout of this appendix in your laptop bag. By running down the list, you’ll know you’re well-stocked enough to meet just about every on-the-road emergency. In the meantime, we’d love to hear your own suggestions for new books in the Missing Manuals line. There’s a place for that on the Web site, too, as well as a place to sign up for free email notification of new titles in the series.
Safari Enabled When you see a Safari® Enabled icon on the cover of your favorite technology book, that means the book is available online through the O’Reilly Network Safari Bookshelf. Safari offers a solution that’s better than e-books. It’s a virtual library that lets you easily search thousands of top tech books, cut and paste code samples, download chapters, and find quick answers when you need the most accurate, current information. Try it for free at http://safari.oreilly.com.
6
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
chapter
Chapter 1
1
Inside Your PC
It took them a decade, but computer engineers finally realized people don’t enjoy opening a computer case to add new parts. The engineers tweaked the design, and now, unlike your computing forefathers, you don’t need to reach for the screwdriver to install a new mouse—you simply plug its cable into a convenient outlet on your PC’s case. But although today’s mice, keyboards, printers, scanners, monitors, and scores of other parts slip into a convenient jack, a few parts still hide inside the case. Some contain fragile circuitry that could be damaged by fumbling fingers. Others stay hidden simply because they rarely need replacing. Today, you need to open your PC only when performing these occasional tasks: • Adding or replacing memory if your PC runs too slowly (usually noticeable when you have several programs open simultaneously). • Adding cards to your PC to give it new abilities—a FireWire port required by a digital camcorder, for instance. • Replacing the power supply if your PC refuses to turn on. • Changing the battery when your PC begins forgetting the time and date. • Identifying parts that are causing problems. This chapter gives you an introduction to your PC’s case and the parts that call it home—the motherboard (page 16), memory chips (page 18), slots (page 27), cards (page 25), and power supply (page 47). This introduction tells you what these parts do, when you need to find them, and, if necessary, how to repair or replace them.
7
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Finding Out Your PC’s Horsepower
Along the way, you’ll learn how to look up your PC’s computing “horsepower,” a handy thing to know when puzzling over the System Requirements list on every software box. Finally, this chapter identifies all the connectors on the outside of your PC’s case, what plugs into them, and what to do if a cable doesn’t fit. Note: If you’re a laptop owner, you’re in luck: everything in this chapter applies to both laptops and PCs. “Laptop Life” boxes explain any differences on how to deal with them.
Finding Out Your PC’s Horsepower Video store clerks never interrogate their customers about their VCR’s voltage or motor speeds. But try to buy software at a computer store or online, and you’re expected to know these intimate details about your PC’s inner workings. The System Requirements fine print for most software, including Windows XP, lists terms like these: • Processing power. This refers to your CPU (page 16), which stands for Central Processing Unit and is your PC’s brain. Engineers measure a CPU’s clock speed—how fast it thinks—in GHz (gigahertz) or MHz (megahertz). The bigger the number, the faster your CPU thinks. For example, Windows XP requires a 233 MHz CPU, but works faster if your PC’s got a 500 MHz or faster CPU. • RAM (Random Access Memory). Memory (page 18), a temporary storage area for Windows to work in, is measured in megabytes (MB). The more RAM you pack into your computer, the more programs Windows can run simultaneously. Windows XP requires 128 MB of RAM, but works best with 512 MB or more. • Video. Most software, including Windows XP, says it requires a “Super VGA” or higher resolution monitor (page 84) and video adapter (page 107), the internal device feeding all those pretty pictures to your monitor’s screen. This cryptic requirement means very little. Nearly every computer sold in the last decade sports both a Super-VGA monitor (if it in fact ships with a monitor) and a Super-VGA video adapter. Some graphics-hungry programs, like games, also want to know the video adapter’s brand, model, and amount of memory. • Hard drive (hard disk) space. You may already know the size or storage capacity of your hard drive (page 255), your computer’s holding tank for stored programs and files. However, most software wants to know the amount of free space left on your hard drive. After all, your new software needs some elbow room. Windows XP, for instance, consumes two or three gigabytes of space; most programs require much less. Most hard drives today hold between 40 and 120 GB of space. • CD drive reading and writing (saving) speed. Here, bigger numbers are better. Today’s compact disc drives (page 307) are fairly speedy, reading information at a speed of about 52X (the “X” means 52 times faster than the original CD models) and burning (recording) at about 32X—plenty fast for most software and file-saving tasks. 8
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Note: The first CD burners took 74 minutes both to read and write to a CD. So a 52X CD recorder burns a CD in less than 90 seconds.
Finding Out Your PC’s Horsepower
• DVD drive reading and writing speed. Again, bigger numbers are better. Today’s DVD drives (page 307) both read and write to DVDs at 16X. DVD burners can also read and write to CDs, making them a handy “do-it-all” drive. • Software version numbers. Age discrimination saturates the computer industry, and software often refuses to work with older, previously released versions of other programs. If that hot new Freeway Designer software requires Traffic Simulator v3.0 and you’re still simulating traffic with Version 2.0, Freeway Designer won’t run. • Operating System and Service Pack. It’s not enough to know that your computer runs Windows XP, Microsoft’s newest operating system. Microsoft has released two additional upgrades to Windows XP known as Service Packs (see page 480) to fix XP’s security holes and other shortcomings. If your PC doesn’t match every requirement listed on a box of new software, the software probably won’t work well or at all. So, how do you know exactly what’s inside your PC? Reading your computer’s receipt or packing slip often provides clues, but you’re not lost if those things have fallen behind the desk. Some computer manufacturers, including Dell (www.dell.com) and Gateway (www.gateway.com), affix serial numbers to the case of every computer they sell. If you spot a number-bearing sticker on the case of your Dell or Gateway PC, visit the manufacturer’s Web site, head to the site’s Customer Support area, and type in the sticker’s number. (Dell calls its serial number a Service Tag.) The Web site displays your computer’s packing slip, listing the specifications of every part it contained when sold. Tip: Can’t read the serial or Service Tag number stamped on the sticker? Visit the company’s Web site, anyway. You can usually download software that extracts the number from its hiding spot on one of your computer’s chips, and, with your permission, ships the number off to the company’s Web site. Armed with your PC’s tag number, the site then displays your PC’s specifications.
When suitably prodded, Windows XP also coughs up specific information about your PC. Table 1-1 shows how to make Windows XP divulge the information System Requirement lists most frequently mention. Figure 1-1 shows how to print a handy list of your PC’s system information that you can carry when shopping for new parts or software.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
9
The PC’s Case
Table 1-1. Locating your PC’s System Requirements information
The Information You Need
How to Find that Information
Operating System, Service Pack number, Central Processor Unit (CPU) type and speed, and available Random Access Memory (RAM).
Start ➝ Right-click My Computer ➝ Properties. The General tab lists the information.
Hard disk size and amount of free space.
Start ➝ My Computer. Right-click your hard drive icon and choose Properties. The General tab lists the information.
CD drive–burning (recording) speed.
Start ➝ My Computer ➝ Right-click CD drive ➝ Properties ➝ Recording tab. In the Desktop CD Recording section near the window’s bottom, click the “Select a write speed” drop-down menu to see your drive’s available recording speeds. (If you don’t spot a tab marked Recording, Windows XP can’t burn CDs on that drive.)
DVD drive–burning (recording) speed.
Windows XP doesn’t recognize DVD burners; it simply lists them as DVD drives (or sometimes CD-burning drives). To find out your DVD drive’s recording speed, you need to look at your PC’s documentation, poke around the menus of your DVD-burning program, or visit the drive manufacturer’s Web site and look up the drive’s model number.
Program version number.
Open any program and choose Help ➝ About.
Display type, resolution, and number of colors.
Start ➝ Control Panel ➝ Display ➝ Settings tab.
Video card memory in MB (megabytes).
Start ➝ Settings and Help ➝ Control Panel ➝ Display ➝ Settings ➝ Advanced ➝ Adapter.
DirectX version, a set of utility programs often used by games.
Start ➝ All Programs ➝ Accessories ➝ System Tools ➝ System Information ➝ Tools ➝ DirectX Diagnostic Tool ➝ System tab.
The PC’s Case Unlike your PC’s glowing monitor, your PC’s case usually sits unnoticed beneath the desk or in a dark corner. After you switch the power on or off, you usually touch the PC’s case for only two reasons: • You want to plug something into your PC, like a new mouse, digital camera, or glowing blue game controller. • You want to place something inside your PC like new memory or a new drive, or you need to replace something that’s not working. Plugging something into the case is easy enough, once you find the right port (page 32), a general term describing any hole, jack, or plug you use to connect things like a mouse or speakers to your PC. Putting something inside the case takes more
10
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
effort, but it’s probably easier than you think, thanks to the design of your PC’s case.
The PC’s Case
Figure 1-1: This list shows the items most frequently mentioned in a software box’s System Requirements’ area. To see this information about your own computer, click Start ➝ Help and Support ➝ Use Tools to View your Computer Information and Diagnose Problems ➝ My Computer Information ➝ View General System Information about this Computer. Click the Print icon to have the printer spit out a handy crib sheet you can take to the store.
PCs aren’t designed like cars, which force owners to find a specific muffler for their ’67 Chevy El Camino. Most PC cases contain standard-sized parking spots called bays for sliding in standard-sized drives—boxy storage units like CD drives or hard drives. For example, almost any hard drive slides smoothly into almost any case’s drive bays (Figure 1-2) and locks into place easily with screws or a bracket The holes in your PC’s case also line up exactly with the holes in the computer’s motherboard (page 16), a large flat card stuffed with your computer’s main circuitry. And the holes in the PC’s power supply (page 47), a metal box that pipes electricity throughout your PC, also align with the holes in your PC’s case. This “matching holes” design lets you easily attach standard-sized parts to your PC’s case with just a few screws. Many of your PC’s other internal parts hail from the same IKEA school of easy assembly, but they use slots and matching tabs. For instance, the motherboard contains standard-sized slots, good for plugging in memory (page 18), which comes on little circuit-filled sticks that let your computer juggle information.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
11
Opening Your PC’s Case
Cards (page 25), larger flat parts that add features like better video to a PC, slip into slightly larger slots on a motherboard. POWER USERS’ CLINIC
Wringing Out the Most Technical Details As you can see in Figure 1-1, Windows XP freely divulges general information about your computer—its available hard drive space, for instance, and its amount of installed memory. However, that’s not detailed enough when you’re troubleshooting annoying error messages or hunting down replacements for misbehaving drivers—the software Windows relies on to talk with external devices like printers and scanners. Sometimes you may need to read specific technical info over the phone during a call to Tech Support. That’s where the System Information window comes in. Useful for troubleshooting problems in specific areas, the System Information window provides a quick way to locate details like driver dates and versions, names of installed codecs (files that let your PC play back media like MP3s or DVDs) and lists of programs that automatically start when you turn on your computer. To see every technical detail Windows XP has to offer, click Start ➝ All Programs ➝ Accessories ➝ System Tools ➝ System Information. If you click any of the items listed in the Components section along the left, Windows XP spills that item’s dossier across the box’s right side.
Windows XP’s System Information tool digs up enough detailed information to solve most problems, but it’s a mere doctor’s checkup compared to the neurological MRI scan SiSoftware’s Sandra (www.sisoftware.net) provides. Download the free version of this program to let Sandra’s special modules detect the most esoteric information about every part of your computer. For instance, if you doubleclick the Mainboard Information module, Sandra shows your motherboard’s name, model, and serial number; the manufacturing date of your memory chips; and the name, manufacturer, and driver date of every device plugged into all of your computer’s ports. Admittedly, much of this information is overkill except to computer technicians. (And technicians usually buy the software’s pay version, which grants access to even more advanced information.) But when you need specific information about something in your computer that’s misbehaving, SiSoftware’s Sandra’s free version rarely fails. If you reach a dead end while troubleshooting, try Googling one of Sandra’s arcane strings of technical details. You may hit upon a solution you’d never find elsewhere.
Opening Your PC’s Case In most cases, opening your PC’s case boils down to sliding off a side panel. But before starting, make sure you have a fresh backup of your most important files. Chances are, nothing catastrophic will happen. But since you should back up your files every day anyway, now’s a good time to make sure last night’s backup worked (see page 463). Before opening the case, turn off your computer and unplug its power cord from the wall. Then examine your computer to see where its case opens. Some newer, expensive computers pop open at the press of two large pushbuttons, as seen in
12
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Figure 1-3, top. (Cases on expensive computers sometimes have built-in padlock holders to keep out potential thieves.)
Opening Your PC’s Case
Figure 1-2: Top: Thanks to the standard design of a PC case, this hard drive slides easily into a shelf called a bay, where a mounting bracket holds it in place. Bottom: Some bays hold items in place with screws. Note how the screw holes in the bay precisely align with the screw holes in the CD drive, making it easy for a few screws to hold the drive in place.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
13
Opening Your PC’s Case
Many computers use two thumbscrews—screws with large round heads that you can twist off with one hand—to hold the side panel onto the case. Twist off the thumbscrews and slide off the panel with an easy push (Figure 1-3, middle and bottom). Older models sometimes use two or three regular screws instead of the easier-to-remove thumbscrews. Once you remove the screws or thumbscrews, slide the side panel toward the back of the computer and outward. After you move the panel a few inches, you should be able to easily pull it off. Set the panel to the side, and you’re in. Figure 1-3: Top: You can open some cases by pressing two large buttons that sit on opposing sides of the case. Press the buttons and lift upwards; the case begins to hinge open. Middle: Screws hold most other cases together. To open the case, remove the screws or thumbscrews (inset) that hold the side panel in place. Bottom: After removing the screws, slide off the panel, pulling it toward the back of the computer.
14
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Tip: It’s easy to lose screws when removing a PC’s case and its internal parts. To prevent mix-ups, place screws from different parts of your PC into different hollows of an empty egg carton.
Opening Your PC’s Case
LAPTOP LIFE
Opening up a Laptop Unlike PCs, laptops don’t use standard-size, easily replaceable parts. Instead, laptops use tiny, specially fitted parts that aren’t interchangeable between models or manufacturers. Simply put, laptops aren’t easy to upgrade or repair. Instead of opening the laptop’s entire case, you open only small plastic flaps to gain access to specific areas, like memory, batteries, and hard drives (each of these items are covered in their respective sections in this chapter).
Unlike PCs, most laptops come with a manual that describes exactly which screws and flaps to remove to reach any upgradeable parts. If you’ve lost your manual, visit the Customer Support area of the laptop manufacturer’s Web site and download a copy. Most manufacturers store their online manuals in PDF form; you can easily read these files as long as you have Adobe’s free Reader program (available at www.adobe.com/reader).
Troubleshooting Overheating Problems Most PC cases are trouble-free, since they rarely break. The only troubleshooting you might have to perform is making sure the case keeps your PC’s parts enclosed and cool: whirling fans inside the case constantly cycle air through strategically placed vents to prevent parts from overheating. If your PC’s case ever feels very warm or even hot to the touch, it’s definitely overheating, and it needs immediate attention. Follow these guidelines to test for proper cooling and learn how to fix potential cooling problems. • Check the air flow. Find your case’s vents and make sure they’re not pushed up against the side of a desk or wall. The case’s side vents need at least an inch or two of clearance. Leave at least six inches of breathing room between the back of your PC and anything else. • Clean the vents regularly. Feel free to leave your PC turned on while you remove dust and pet hair with a vacuum cleaner’s brush nozzle. (Most of the dust clogs the computer’s back fan vent.) If you notice a dust beard growing from your computer’s vents, pick up a can of “Dust Off” or similar compressed air from your local computer or office supply store. Take the computer outdoors, remove its case (page 16), and spray off any dust clogging the vents and parts. • Leave the sides of the case attached. If you just installed a new part (a DVD drive, for instance), run the computer with the case open or with a side-panel removed while you confirm that everything works okay. But don’t leave it that way for regular use, even if you want to look fashionably geeky. Case vents are designed to move the air flow over the PC’s hottest parts. Leaving the case open or off disrupts the air flow and can make your PC run hotter than it should.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
15
Motherboard
• Listen for the main fan. Behind a vent on the back of your PC lives a large fan that constantly pushes air through your PC. If that fan stops spinning, your PC will overheat. You can usually see or hear the fan spin, but if you’re not sure the blades are moving, try this test: stick a thin strip of paper (not wire) through the vents to feel the fans brush against it. If the fan isn’t moving, you’ll need to replace your PC’s power supply (page 47) since that’s where the fan lives. Note: Built to last, PC cases don’t wear out. But if you find yourself contemplating a shiny new case with glowing blue lights, set aside a day or two to move your old PC’s guts to its new housing. For more information about choosing cases and bolting down parts, check out Building the Perfect PC (O’Reilly).
Motherboard Your PC’s motherboard, a large flat, rectangular piece of circuitry, serves as a platter for your computer’s brains, memory, cards, and connectors. Everything inside your PC ultimately connects to the motherboard, which shuttles information between the parts. Since the motherboard lies buried deep inside your PC, you’ll spot it only under a few circumstances: when replacing the battery, replacing the power supply (page 47), adding memory (page 18), or adding cards (page 25). When rummaging inside your computer during one of those tasks, use Figure 1-4 as a roadmap.
CPU (Central Processing Unit) The CPU, the chunky chip serving as your computer’s brain, determines how quickly your computer follows instructions. The more powerful the CPU, the faster it can fling around information, leading to less time waiting at the keyboard. Windows XP works well with CPU’s from two companies: Intel’s Pentium 4 (fastest) or Celeron (slower) CPU, or AMD’s Athlon 64 (fastest) or Sempron (slower) CPU. Engineers measure a CPU’s “thinking” speed (known as clock cycles) in megahertz (MHz) or gigahertz (GHz); the bigger the number, the faster the CPU, and the more you pay for it. This knowledge comes in handy when shopping for computers, as you know that a 3.6 GHz PC is slightly faster (and more expensive) than a 3.2 GHz. It’s mostly gamers and movie editors who need super fast, super expensive PCs. For word processing and e-mail, most people do fine with a bargain-priced 2.4 GHz Celeron or Sempron. Once you bring your computer home, you can’t do much more with the CPU besides look at its perch on your motherboard. (And even peeking isn’t easy,
16
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
because the CPU’s always covered with a fan or metal flippers to cool it down.) In theory, you can pop an old CPU off the motherboard and pop in a faster one, but it’s rarely worth the effort, for several reasons.
Card in slot Ports
Slots
Battery
CPU
Drive connectors
CPU cooler
Memory in slots
Back of case
Power supply
Main power supply connector
Power cables for drivers
CPU (Central Processing Unit)
Figure 1-4: Your motherboard contains your CPU, battery, memory, memory slots, cards, slots, and connectors for plugging in parts and cables. Motherboards vary slightly in their layouts, so your’s probably looks somewhat different. But these main components appear on every motherboard. (The power supply connects to the case, not to the motherboard, but its wires lead to the motherboard to feed it power.)
First, replacing a CPU is expensive and time consuming. Second, different types of CPUs require different types of motherboards—they’re not nearly as interchangeable as most computer parts are. Finally, a PC’s only as fast as its slowest part. That slow part is most likely the hard drive, the video card, the memory, or all three. In most cases, adding a slightly faster CPU to your motherboard won’t make a noticeable speed difference. If you’re itching to speed up your PC, try adding more memory (page 18) or a faster hard drive (page 255), instead. When it’s time to replace your CPU, it’s usually time to replace the entire computer.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
17
Adding Memory (aka RAM)
Adding Memory (aka RAM) Many people confuse memory with hard drives, because they both store the same things: programs, documents, digital photos, and other files. What’s the big difference? POWER USERS’ CLINIC
Identifying Your Motherboard To save money, many of today’s motherboards include built-in video, sound, modems, and network ports. When searching for drivers for those items (page 508), you need to know your motherboard’s manufacturer, model, type, and chipset, all explained below. This information usually appears on your PC’s invoice or packing slip, but if it’s not listed, here’s how to find it yourself. Manufacturer and model refer to the motherboard’s creator and identifying name. Sometimes the manufacturer prints this information directly on the motherboard or on an affixed sticker. But when faced with an unidentified motherboard, search other areas for clues: your PC’s BIOS boot strings—the words and numbers that appear when you first turn on your computer—or the System Devices area of Windows XP’s Device Manager. The motherboard’s type (also called form factor) refers to its physical size. The motherboard’s size must match the PC case so the mounting holes and brackets align. Most modern PCs use a size called ATX (which stands for Advanced
Technology eXtended) for the case, motherboard, and power supply. The chipset refers to the manufacturer of the chip that serves as “traffic director” for routing information through the motherboard. Intel motherboards usually use Intel chipsets. But manufacturers of cheaper motherboards often buy chipsets from third parties. To locate the chipset’s maker, try searching on Google for the motherboard’s manufacturer and model. Such a search usually turns up the motherboard’s online manual, features list, or even a photo with the parts labeled. When stumped for clues, try using software written specifically to identify motherboards. Motherboards.org (www. motherboards.org) has a Tools section that lists several free programs for revealing a motherboard’s identity. The free version of SiSoftware’s Sandra (www.sisoftware.net) (page 12) can often identify a motherboard, as well.
Well, your computer uses your hard drive as a huge parking lot that stores all the information that you want to permanently store. But managing all that space slows down the hard drive. Just as finding your car and getting it out of the lot takes time—you find yourself waiting for Windows XP to load a program or file. Compared to a lumbering hard drive, memory is as speedy as a freeway. That’s why Windows loads programs and files off the hard drive and into your PC’s memory to use them. PCs would run much more quickly if everything was stored in RAM and computer operations could skip hard drives altogether. Why don’t PCs work this way? Because memory’s expensive when compared to hard drives. Hard drives cost only about a dollar or so per gigabyte; memory costs about $200 per gigabyte. To save you money, Windows pulls a little trick when it runs out of memory: it stakes out a chunk of empty hard disk space and uses it to dump information that won’t currently fit into memory. By juggling information back and forth from the 18
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
hard drive to memory, Windows XP works a little more slowly, but still gets the job done.
Adding Memory (aka RAM)
UP TO SPEED
The CPU Wars: AMD vs. Intel Two major companies, Intel and AMD (Advanced Micro Devices), make CPUs for PCs. AMD’s CPUs cost much less, but lack the prestige of Intel’s name and high-priced chips. Both brands work equally well, although some say that AMD currently holds the edge. Intel’s fastest CPU is the Pentium 4; its top CPU for laptops is the Pentium M, designed especially to prolong battery
life. AMD’s fastest CPU is the Athlon 64, and, for laptops, the power-saving Turion. A few years ago, most people bought PCs based on CPU speed. Today’s breed of CPUs work so quickly that the other parts of the PC have to work to catch up. The biggest battles now take place among video card manufacturers, as they try to create cards that crank out graphics as quickly as the games can serve them up.
Note: The chunk of hard drive space used as makeshift memory goes by several names: “virtual memory,” a “paging file,” or a “swap file.”
But perhaps the biggest difference between memory and a hard drive is durability. Once stored on a hard drive, information stays put when you turn off your PC. Information stored in memory, however, disappears whenever your PC crashes or you turn it off. FREQUENTLY ASKED QUESTION
Breaking Through the Byte Barrier What’s the difference between a kilobyte (KB), a megabyte (MB), and a gigabyte (GB)? And what about megahertz and gigahertz?
holds about one book, one large digital photograph, or one minute of music. Multiply those items by 1,000 to realize the massive size of a gigabyte.
Here’s the easy answer: computers measure storage capacity in bytes. A kilobyte contains 1,024 bytes, a megabyte contains 1,048,576 bytes, and a gigabyte contains more than a billion of the darn things. Each one holds 1,000 times more storage space than the previous one.
When describing storage, most keychain drives hold between 256 and 512 MB. One CD holds about 700 MB, or the equivalent of one music CD. And most hard drives sold today can store at least 40 GB of information.
In more practical terms, think of a single byte as containing a single number or letter. One kilobyte—1,000 bytes—holds about a paragraph or two. One megabyte of storage space
The same 1,000-fold increase applies to megahertz and gigahertz, the terms used to measure a CPU’s speed. One GHz equals 1,000 MHz, so a 2 GHz CPU is actually four times as fast as a 500 MHz CPU.
You only have to fiddle with your PC’s memory under two conditions: • You want to add more memory to speed up your computer. • You suspect a memory chip is bad. Usually this is a last resort when your PC’s not working correctly. Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
19
Adding Memory (aka RAM)
Memory comes on modules—little chip-filled sticks about the size of a piece of Wrigley’s chewing gum. Each module lives in its own little slot on the motherboard; two little levers (one on each side of the slot) lock it in place (Figure 1-5). To remove memory, unlock its levers and pull it out; to add memory, push it into the slot and lock it in place with the levers. Figure 1-5: Top: To add memory, push the module all the way into its slot on the motherboard. (Sometimes you need to push really hard to make sure the memory fits snugly into its slot.) As you push, little levers on each side of the slot move inward, trying to grasp the module’s little notch. Bottom: Give the levers a little push toward the module to lock it into its slot. To remove a module, reverse the steps. Pull out the levers to lift the module from its slot, and then lift the module with your fingers.
20
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Warning: To avoid damaging your memory from static, wear latex gloves to handle the chip, insert it, or remove it from its socket. If you’re out of latex gloves, buy a “grounding strap” from a computer store. The strap eliminates static when you attach it between your wrist and the computer’s chassis.
Adding Memory (aka RAM)
Adding or Replacing Memory Adding memory to your PC is the single best way to improve its performance. With more memory installed, you can run more programs simultaneously, open and save your files more quickly, and boast about how much RAM you have to your friends and neighbors. Fortunately, inserting additional memory modules into your motherboard’s slots is as easy as pushing toast into a toaster. The hard part of adding memory comes when choosing the specific type of memory your PC needs. First, memory comes in different sizes (memory and slots use several physical sizes, and they must match), capacities (128 MB to 1 GB or more), types (SDRAM, DDR SDRAM, RDRAM, and others), and speeds (memory rated at 166 MHz can run faster than memory rated at 133 MHz). Second, motherboards can access only a certain amount of memory. You can add 4 GB of memory to nearly any motherboard, for instance, but if the motherboard can access only 2 GB, you’ve wasted your money. Finally, some motherboards insist you install memory in matched pairs. These finicky motherboards insist that you install two modules of the same type of memory. They won’t recognize a single module until you fill a nearby slot with another module of the same size, capacity, and speed as the first. Yes, these tasks make for daunting homework assignments, and memory vendors know it. So, to find your own PC’s picky memory requirements, visit the Web sites of the most popular memory vendors: Crucial (www.crucial.com), Kingston (www. kingston.com), or SimpleTech (www.simpletech.com). All three Web sites offer online tools for choosing the most compatible memory for your particular computer. Choose your PC’s make and model from a dropdown list; the Web page then lists your PC’s memory type, its motherboard’s memory capacity, and whether you have to add the memory in pairs. Best yet, the page lists the exact type of memory module you need, as well as the price. Don’t know your PC’s make or model? Then download and run Crucial’s free Memory Advisor program (Figure 1-6), which sniffs through your PC and supplies you with all the info you need. If you can’t locate the right type of memory for your particular computer using these Web sites, resort to some sleuthing on your own. Track down your motherboard’s make and model (page 16), visit the support area of the motherboard
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
21
Adding Memory (aka RAM)
Memory currently installed
manufacturer’s Web site, and look up the memory requirements for that particular model. Motherboard’s total capacity
Number of slots on your motherboard, and the memory of the currently installed modules
Your PC’s manufacturer and model
Figure 1-6: In less than a minute, Crucial’s Memory Advisor program (www. crucial.com) scans your computer and dishes up exactly what you need to know when replacing memory: the amount of memory your motherboard can handle, the type of memory you need, the number of empty and used memory banks, a suggested memory module for your computer, and its price. Print out the page and check prices at local shops before buying.
The size, type and capacity of memory you should install to upgrade your PC
LAPTOP LIFE
Upgrading Memory Almost all companies that sell PC memory online also sell laptop memory. Laptop memory uses a smaller physical size than PC memory—the size varies among models and manufacturers, and many laptops contain only a single slot for memory. All those restrictions significantly jack up the price of buying memory for laptops over memory for desktop PCs. When shopping, be sure to buy memory created specifically for your laptop’s brand and model, or it won’t fit. To remove your laptop’s old memory, unscrew a plastic flap on your turned-off laptop, remove the flap, and locate the
22
memory. (Some Sony Vaios make you remove the keyboard to find the memory hidden underneath.) Most memory pulls directly out of its slot; some memory uses little clasping levers, just like desktop PC memory (page 20). After removing your laptop’s memory module, push in a higher capacity module, lock it in place (if necessary), and replace the cover. When you turn on your laptop, it automatically notices the upgrade. If your laptop doesn’t notice the improvement, the memory’s the wrong type, the motherboard can’t handle that much, or you inserted the module incorrectly.
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Adding memory Even when you know the type of memory your PC needs, you need a little gradeschool arithmetic to choose the right capacity. Follow these guidelines when upgrading your PC’s existing memory:
Adding Memory (aka RAM)
• Determine the memory your computer currently contains. When you rightclick My Computer and choose Properties, Windows displays the amount of memory (RAM) inside your PC. (It’s listed on the bottom line of the window, or very near the bottom.) • Determine the type and amount of memory your motherboard can handle. The online calculators at the memory vendors’ Web sites (page 22) list your motherboard’s memory limit. Subtract the amount of installed memory from your motherboard memory limit to find out how much more memory you can add. • Determine the amount of memory you need. Microsoft says Windows XP requires 128 MB, but 512 MB is more realistic. Your only limit is your bank account and the amount of memory your motherboard can physically process. If you work with lots of digital photos or video, consider upgrading to 1 GB or more. FREQUENTLY ASKED QUESTION
What Do I Do with My Old Memory? Since my memory slots were all full, I replaced a 128 MB module with a 512 MB module, giving me an extra 384 MB. Now what do I do with my orphan 128 MB memory module? They say you can never have enough memory, but that’s only when the memory’s inside your computer. Leftover memory causes headaches for PC and laptop owners. Before assuming that you must simply eat your loss, ask if the company accepts trade-ins. That not only gets rid of your old memory, but lowers the price on your new memory. (Some of these dealers resell your used memory as
new memory since there’s little way of telling the difference, but that’s another story.) Some online dealers also buy and sell used memory, but don’t pay much for it. New memory’s never been so inexpensive, so most people want the new stuff. When stuck with an extra module or two, don’t take it too badly. A stash of parts comes in handy when troubleshooting. Store the leftover chip in the static-proof packaging left over from your new memory (or in a zip-lock baggy) and keep it around as a replacement should you suspect a module is bad.
• Count your motherboard’s empty sockets. If the online Web sites can’t count your motherboard’s empty sockets, pop off your PC’s case (page 12) and look for yourself. Spot an empty socket? Then you can fill it with a memory module to increase your computer’s memory. But if your sockets are all full, things become trickier. To upgrade, you must replace a low capacity memory module with a higher capacity module. Replacing a 128 MB module with a 512 MB module, for instance, gives you an additional 384 MB of memory.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
23
Adding Memory (aka RAM)
• Buy and install the memory that meets your needs. Once you decide the amount of memory you need, buy it online or from your local office supply or computer store, and install it by pushing it into the empty slot as described on page 20.
Troubleshooting Memory Problems Memory doesn’t leave much room for troubleshooting. It either works or it doesn’t. Unfortunately, it’s not always obvious when it doesn’t work. Sometimes your PC tells you upfront. Many PCs tally up their memory when you first power them on, and use cryptic error messages mentioning “parity” and “memory” if something’s wrong. Other symptoms aren’t as obvious, including inexplicable Windows crashes ending with “The Blue Screen of Death”—an ugly blue screen displaying an indecipherable error message. Sometimes large programs crash when you load large files, as they stretch your memory to its limits. Many people check their memory as a last resort, when they can’t find anything else to blame for their PC’s intermittent, undiagnosed problems. TROUBLESHOOTING MOMENT
Testing for Bad Memory Bad memory looks identical to good memory, so eyeballing the module won’t reveal its state of health. If you suspect one of your memory modules has gone bad—or your PC has intermittent problems you can’t blame on anything else—take all the modules to a computer repair shop for testing on their professional machines. In a pinch, you can test the memory yourself. Remove all your memory modules except one. Then run any or all of these free memory testing programs: • Free memtest86+ (www.memtest.org) • DocMemory (www.simmtester.com) • Windows Memory Diagnostic (http://oca.microsoft. com/en/windiag.asp) Your computer runs fine with only one module during the test because all three programs create a bootable floppy disk or CD. Restart your computer with the program’s floppy or CD in the drive, and the software begins testing your memory immediately, keeping Windows or any other program from loading.
24
If the first memory module passes the test, turn off your computer, replace the memory module with another one, and turn the computer back on to run the testing program and test the new module. If one of your memory modules fails the test, you’ve most likely found the culprit—unless the slot itself is bad. To rule out that final possibility, move the module to a different slot and test it again. On the rare chance the slot is bad, put your modules into different slots, leaving the bad slot vacant. If all your slots were full of memory, and now one’s slot’s bad, you’re in a quandary. You could just run your PC with less memory. But if you need the memory and can’t afford a replacement motherboard with good slots, pitch your lowest capacity memory module and replace one of your other memory modules with a higher capacity module to make up for the loss, as described on page 23.
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
But before assuming one of your memory modules has gone bad, try the following tips:
Installing Expansion Cards
• Reseat the memory in its sockets. Turn off and unplug your computer. Then remove and reinsert one memory module into its slot. Repeat with the adjacent slot until you’ve removed and reseated every module. Then plug your computer back in to see if you’ve cured the problem. If you have another memory module lying around, use it to replace your other modules, one at a time, restarting your computer each time to see if the problem disappears. • Clean your memory chip’s contacts. A memory chip’s contacts—the shiny tabs that plug into the motherboard’s slots—often tarnish with age, creating a bad connection. To fix them, remove your memory chips and carefully rub the contacts with contact cleaner, which you can pick up from any hardware store. (A pencil eraser also works in a pinch.) Reinsert the cleaned-up modules into their sockets, turn on your computer, and see if the eraser trick cleared things up. • Check the memory’s type, slot position, and capacity. Double-check to make sure you replaced your memory with the correct type and that you didn’t add more memory than your motherboard can recognize (page 23).
Installing Expansion Cards Expansion cards, envelope-sized “mini-motherboards” like the one shown in Figure 1-7, live on from computing’s early days. Cards let people expand their PC’s power, often by adding new connectors called ports. Twenty-five years ago, for instance, many people installed a card with a special port that accepted the latest new computing gadget: a mouse. Today, people still add new ports to their PCs by pushing cards into special slots on their motherboard. For instance, digital camcorders dump video into PCs through a FireWire port, a high-speed connector missing from most PCs. If your PC doesn’t have a FireWire port, open your PC’s case, and push a FireWire card into one of your motherboard’s empty slots. The new FireWire port appears on the back of your PC. The new port appears because of the way cards are shaped. Most cards contain ports on one edge and a tab on their bottom that you push into the motherboard’s slot. When pushed into a slot, the cards’ ends poke through the back of your PC, looking like a row of silver strips. Figure 1-7, top, shows a card before it’s installed; below it, a figure shows the newly installed card joining a row of previously installed cards viewed from the outside of your case. Most items that once came on cards now plug into much-more-convenient USB ports (page 34). But when you need something that USB can’t offer, like a FireWire port, expansion cards do the job. With a price tag averaging $30 to $100 per card, adding an expansion card is much cheaper than buying a new computer. Cards can add more than new ports to a computer. Adding an MPEG decoder card, for instance, adds special circuitry to the motherboard. Your computer uses a Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
25
Installing Expansion Cards
chip on the MPEG decoder card to convert video into MPEG format, which is the format commonly used to store video on DVDs. Figure 1-7: Top: Sliding this sound card into a slot on your PC’s motherboard provides a quick way to add better sound to your PC. Other types of cards let you add things like FireWire ports, a microphone, or a joystick. The tab on the card’s bottom (circled) slips into a slot on your PC’s motherboard. Bottom: The rear ends of installed cards poke through the lower back of a PC, so that you can access any ports the cards contain.
Newly installed card
26
Other installed cards
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Identifying Cards and Slots Engineers redesign slots every few years, making each new breed faster and more powerful. Since slot types aren’t compatible with each other, they all use a slightly different size to keep folks from pushing the wrong type of card into the wrong type of slot. Your PC contains a motley crew of differently sized slots, all meant for different types of cards.
Installing Expansion Cards
The newest, most powerful slots handle the most souped-up cards, usually the latest, super-fast video card to please the gaming and graphic design crowd. Motherboard designers always add a few of the newest slot types to their latest motherboard. But the designers always leave in a few older slots to stay compatible with older cards. With such an assortment of slots to choose from, few people use every slot in their computer. If you’re ready to expand your PC with a new port, new circuitry, or something not available through a USB port, start by peeking at your motherboard’s slots (page 28) to see what type of empty ones it contains. Key distinguishing characteristics are slot size and color. Once you’ve identified your slot type, you’re ready to shop for the appropriate card to fill it. Your PC’s motherboard probably comes with a mixture of these slot types: ISA, PCI, AGP, or PCI-Express, all described below and shown in Figure 1-8. Ranked in order of popularity, these slots live on most motherboards: • PCI (Peripheral Component Interconnect). Colored white, PCI slots sit together in a row on most motherboards today. Since they’re the most popular, most stores sell a wide variety of PCI cards. When shopping for a PCI card to add to an empty PCI slot, look for the acronym PCI on the card’s box to ensure the card fits. (Don’t confuse “PCI” with “PCI-Express,” a newer and different type of slot explained below.) • PCI-Express (Peripheral Component Interconnect—Express). Usually colored black, the newly released and powerful PCI-Express slots aim to replace all other slots in the coming years. Found only on the newest computers, PCIExpress slots come in small (dubbed “1X”), medium (4X and 8X) and long (16X) sizes. Some new video cards fit into the long PCI-Express 16X slot, but the other sizes are so new, hardly any cards use them. • AGP (Accelerated Graphic Port). Usually brown, AGP slots differ from other slots in that they accept only video cards. (And the newest video cards are beginning to switch over to PCI-Express format.) Your AGP slot, if you have one, lives on the end of your PCI slot row, toward the middle of your motherboard. • ISA (Industry Standard Architecture). Black ISA slots, found only on old computers, let computer hobbyists run their stash of treasured but obsolete parts— like those 20-year-old modems they can’t bear to part with. If your computer has an ISA slot, it usually sits at the beginning of the row of PCI slots, on the motherboard’s edge. Most people never use it.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
27
Installing Expansion Cards
Tip: Unlike other cards, which usually stick to PCI slots, video cards come in three different types: PCIExpress (black), AGP (brown), or PCI (white). Since your video card must match your slot, you need to make sure you buy the right type of card to fit your slot.
PCI
ISA
AGP
Figure 1-8: Top: This motherboard, made in 1998, contains a row of four white PCI slots, which accept most cards sold today. To their right sits one brown AGP slot, used only by some video cards. To the left sits one black ISA slot (rarely seen, as it accepts only very old cards). Bottom: This motherboard from 2004 bears a row of three white PCI slots. To their left is a large black PCI-Express slot used by the latest video cards. On the far right lives a small PCI-Express slot that’s so new, very few cards yet fit it. You identify slots mostly by their color (which you can’t see in this black and white photo). Many motherboards also print the slot’s type next to the slot in fine print.
Three PCI-slots
Two PCI-slots
28
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Adding or Removing a Card Before you install a card, turn off and unplug your PC, remove your PC’s case (page 12), and take a moment to orient yourself. Your new card’s shiny silver edge (the side containing the card’s ports, if it has any) aims toward the back of your PC, where it pokes through one of the case’s several rectangular openings (as shown on Figure 1-7, bottom). Once you have your bearings, follow these steps to insert and attach your new card.
Installing Expansion Cards
1. Remove the thin piece of metal covering the opening in your PC’s case near the empty slot. A piece of metal covers the opening where your card will poke through (Figure 1-9). Remove the screw that holds the cover in place, and lift out the cover. Figure 1-9: A row of rectangular openings along the back of your PC’s case lets each card poke through. The opening lets you access the card’s ports after you close the PC’s case. A little metal strip, held in place by a single screw, covers each unused opening. Unscrew and lift out the metal strip near your vacant slot. Save that strip, as you’ll need to reinsert it if you ever decide to remove a card.
2. Position the card directly over the slot. The card’s flat metal end points toward the newly uncovered rectangular opening in the back of your PC (Figure 1-10). A notch in the card’s tab aligns with a ridge in the motherboard’s slot. The design lets cards and slots mesh like pieces
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
29
of a puzzle. You won’t be embarrassed by accidentally pushing a PCI-Express or AGP card into a PCI slot, because the card won’t fit.
Installing Expansion Cards
Flat silver end of card
PCI card
Notch in card’s tab
Ridge inside slot
Figure 1-10: To insert a card into a slot, hold the card over the slot, pointing the card’s flat silver end toward the back of your computer. Align the notches in the card’s tab with the little ridges inside the slot. Push down gently but firmly until the slot devours the card’s entire bottom edge.
PCI slot
3. Push the card into the slot. If the card resists, try pushing with a gentle rocking motion until it slips into the slot. 4. Fasten the card in place and then replace your PC’s cover. Some PCs hold a card in place with a single screw, shown in the top of Figure 1-11. Other cases use a long, thin, push-down bracket, as shown in the bottom of Figure 1-11. Reverse these steps to remove a card: lift the bracket or remove the screw that holds the card in place. Then pull the card upward until it pops out. Pulling a little bit on each end of a card in a seesaw motion removes the most stubborn cards. Removing a card leaves a long rectangular opening in the back of your PC. If you’ve lost the original metal cover to the opening, pick one up at a computer store. You need to block that hole to keep dust and spiders from entering your PC, as well as to improve your computer’s air flow so it can stay cool inside.
Troubleshooting Card Problems Unlike other parts covered in this chapter, cards almost always require drivers— specially crafted pieces of software that let your operating system recognize and 30
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
talk to the cards. Once you’ve installed a card, Windows usually recognizes it, and begins searching through its own built-in stash of drivers for the right one.
Installing Expansion Cards
Figure 1-11: Top: Some PCs hold cards in place with a single screw along the top. When you accidentally drop the screw onto the motherboard—and this happens often—turn your PC upside-down, shake the screw out, and try again. Bottom: Other PCs let you push down a single cover or bracket to hold all the cards in place. If your PC uses the bracket, don’t screw the cards down—just use the bracket.
Card holding bracket
If you’re lucky, Windows automatically locates the right driver, installs it, and begins chattering with your PC’s new accessory. Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
31
Ports
If you’re not lucky and Windows doesn’t even notice your newly installed card, run Windows’ Add Hardware Wizard (Start ➝ Control Panel ➝ Add Hardware). The Wizard searches your PC for the new hardware, finds it, and leads you through the process of installing the driver. If you’re downright cursed, Windows needs your handholding in locating and installing the right driver (page 514). Some PCs don’t have any cards in their slots. That means the circuitry for most of your PC’s ports—its network, sound, and video ports—are built into the motherboard itself. Sly engineering wizards compressed all those circuits into a chip or two and placed it on the motherboard. Reducing a bulky card to a tiny chip saves space, cost, and, unfortunately, performance. Sliding in a high-performance card overrides the motherboard’s built-in circuitry, letting you beef up your computer. If your newly added replacement for a motherboard’s onboard task—video, for instance—doesn’t work, you probably need to enter your PC’s BIOS area (page 525) and disable its onboard video. That tells the PC to stop using the motherboard’s built-in circuits and to use the more advanced circuitry on the newly added video card, instead. Tip: The contacts on cards sometimes tarnish with age, leading to a bad connection and bad behavior. To clean them, turn off and unplug your computer. Remove the problem card and rub its contacts with a plain ol’ pencil eraser until they’re shiny again. Push the card back down into its slot, fasten it down, cross your fingers, and turn on your computer.
One more thing: If one of your cards doesn’t work, or the installation program has trouble with it, turn off your PC and move the card to a new slot. Sometimes that gives the PC a fresh look at things, and helps it recognize the card more easily.
Ports The word port sounds like some kind of a well-protected haven—after all, boats pull into them when the weather’s rough. Ports stay well protected on computers, too, usually located as awkwardly as possible on the back of your computer, as shown in Figure 1-12. But rather than havens or harbors, computer ports are any type of connector on your PC, from the small rectangular hole of a USB port to the odd-shaped nub of a serial, game, or parallel port. Whatever the shape, ports provide quick entrance for the cables of portable music players, digital cameras, printers, speakers, and other mainstays of the computerized lifestyle.
32
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Thanks to Windows “Plug and Play” technology, you needn’t turn off your computer before plugging something into a port. Serial
Ports
Figure 1-12: A wide variety of connectors have graced the rumps of computers over the past 20 years. Today, most computers have more ports than you need, simply to stay current with older parts. The ports used most often, USB ports, live on the back of this computer, but sometimes live on a PC’s front panel, as well as on the sides of some keyboards and monitors.
Parallel
PS/2 mouse PS/2 keyboard USB Network Digital monitor VGA monitor Telephone cable to wall’s telephone jack Telephone handset FireWire
Speakers Microphone
Digital sound Line in
Note: The one exception is the elderly PS/2 mouse jack (page 44); you must turn off your computer before plugging in a PS/2 mouse. USB mice—the ones with rectangular plugs—don’t require you to turn off the computer first.
Engineers think up new port types every few years. Not everybody lives on the cutting edge, though, so new ports usually began life on cards (page 25), drop-in pieces of circuitry that stick out the back of your computer. (You can spot the cards in Figure 1-12; they’re the horizontal strips near the bottom of the computer’s case.)
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
33
Ports
Older, more established ports—USB, serial, parallel, PS/2, and occasionally networking—come built into the motherboard (page 16). You can see built-in ports in Figure 1-12; they’re that cluster of connectors above the strips of cards. The rest of this section contains close-up pictures of the ports you need when plugging in their appropriate gadgetry.
Video (aka VGA) The vast majority of monitors plug into this usually blue, 15-hole female port (Figure 1-13). When plugged into a VGA (Video Graphics Array) port, a monitor runs in analog mode, an elderly video standard that still thrives today. Many PCs today include a built-in VGA port. Digital monitors, by contrast, known for their sharper images and shocking price tags, plug into differently shaped ports rarely found on PCs. Instead, people install digital ports by adding a video card (page 25). To find the video card and its digital monitor port, if you have one, look among those shiny strips of metal consuming the bottom half of your computer’s back panel. If you have a digital monitor but no digital port, you’re not left in the dark. Many digital monitors contain both a VGA and a digital port, so you can plug them into either a VGA port or a digital port. When plugged into a VGA port, a digital monitor’s picture won’t look quite as sharp. It’s fine for most work, but if the picture’s not detailed enough for your eyes, start shopping for a digital video card. Some digital video cards contain two video ports—one analog and one digital. Extremely versatile, they let you plug in whatever monitor you own: either a regular, analog monitor or an expensive digital monitor. Or, for the ultimate in sprawling-desktop extravagance, plug in both types of monitors and spread your desktop across both displays (page 89). Analog monitors, digital monitors, and video cards get their own coverage in Chapter 3.
USB Ports (aka Universal Serial Bus) Most computer accessories plug into a USB port—a rectangular slot (Figure 1-14) usually hidden on the back of your computer. Newer computers also sprout a few USB ports along the case’s front, keeping them handy for digital cameras, MP3 players, and other dump-and-go portables. USB-loving parts include keyboards, mice, hard drives, printers, scanners, sound boxes, network adapters, PDA cradles, digital cameras, keychain drives, portable laptop lights, fans, and many other bits of digital gadgetry. Some USB keyboards sport extra USB ports on their sides, letting you chain even more USB gadgets through a single port. But no matter how many USB gadgets
34
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
you crave, you’ll probably run out of desk space before running out of ports: your PC can juggle up to 127 simultaneous USB devices.
Ports
Figure 1-13: Top: Most monitors plug into a VGA port, found on nearly every PC built in the past 15 years. Bottom: The vastly more expensive digital monitors plug into a digital video port. Unlike most cables, monitor connectors are secured into their jacks with two screws. Turn the two thumbscrews next to the port to tighten them, keeping the monitor’s cable from accidentally falling out of the computer when you move the monitor on your desk.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
35
Ports
Tip: Some USB accessories insist that you install their drivers before plugging them in; others want the drivers installed after you attach them. You can look up a particular device’s preference in its manual, if it has one. Or, you can create a Restore Point (page 500) before plugging in the device. If the device doesn’t work, the Restore Point lets you erase Windows XP’s bad experience, install the device’s drivers, and then try again.
Figure 1-14: Most computer parts today plug into a rectangular USB port. If the cable from your USB gadget won’t reach your computer, pick up an extension cable. Don’t get carried away, though, as some power-hungry USB goodies can’t handle cables longer than six feet.
Most USB devices are “Plug and Play,” meaning you simply plug them in, and wait a few seconds for them to formally introduce themselves to Windows. When Windows XP gives the “installed and ready to use” pop-up message, feel free to start using them. If Windows XP snubs them at the door, though, you probably need to install a driver (page 514) for your new USB gadget. Troubleshooting USB problems The most versatile of computer connectors, the USB port lives a surprisingly trouble-free life. Most of the time, Windows XP recognizes devices when they’re first plugged in, letting you use them within a few seconds. Should things go wrong, however, try these suggestions: • The plug doesn’t fit. Your first USB problem may be simply plugging in the cable. Unlike most plugs, the symmetrical USB plug doesn’t show which way is “up.” Still the plug fits only in one direction, so if you’re having trouble inserting the darn thing, flip it over and see if it finally slips into the jack. • The plug is the wrong size. If the plug still doesn’t fit, you may be dealing with a size issue. USB plugs come in three sizes, as shown in Figure 1-15. Most cables use the larger size plug, but some small, portable devices use the smaller size. 36
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
(Most small USB devices come with a converter cable bearing a large plug on one end for your PC and small plug on the other end for your gadget.)
Ports
Figure 1-15: USB plugs and ports come in three main sizes. The vast majority use the standard, rectangularshaped size called “Series A” (left). Others use the fatter, six-sided size called “Series B” (middle). Small consumer devices like digital cameras and MP3 players often use the smallest size called “Mini-Series A/B” (right).
FREQUENTLY ASKED QUESTION
The Two Speeds of USB: 1.1 vs. 2.0 When I plug in my digital camera or keychain drive, Windows XP sends me an error message saying the device will work faster if plugged into a USB 2.0 port. What’s USB 2.0, and how do I know whether I have USB 1 or 2? Your device will still work, thank goodness, but more slowly, and here’s why. USB ports now come in two main speeds. The slow, early-issue USB 1.1 ports worked fine for things like keyboards and mice, which didn’t transfer information very quickly. But sending huge digital camera files through a USB 1.1 port is like pouring gallons of molasses through a straw. To keep up, engineers created the newer USB 2.0 ports. The new ports send data 40 times faster than their predecessor, and they’re also backwards compatible, working fine with USB 1.1 ports.
If speed is an issue—and it is with most scanners, digital cameras, iPods, and portable hard drives—then upgrade to USB 2.0. Upgrading is a relatively simple matter of plugging a USB 2.0 card (page 25) into one of your motherboard’s slots. The cards, available for under $30, usually come with drivers; if yours didn’t, connecting to Windows Update (page 478) automatically downloads and installs the USB 2. 0 drivers that Windows XP needs. Most computers sold after 2003 come with USB 2.0 ports. To see if your computer already supports USB 2.0, rightclick My Computer ➝ Properties ➝ Hardware tab ➝ Device Manager ➝ Universal Serial Bus controllers. If you spot the words “USB2 Enhanced Host Controller” somewhere on the Device Manager’s right-side pane, your computer supports USB 2.0.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
37
Ports
• Windows XP doesn’t recognize the USB device. Sometimes Windows XP doesn’t recognize your newly plugged-in part and gives up. That means Windows XP doesn’t have a driver (page 514) for it. To fix the problem, unplug the device and run its installation software to install the driver, so that Windows XP embraces your gadget when you plug it in again. • The cable doesn’t work. USB 2.0 pipes information through the cable 40 times faster than USB 1.1, so manufacturers strengthen USB 2.0 cables with extra shielding—an extra cover of wire wrapping—to keep the data running smoothly. The extra shielding thickens the cables somewhat, but sometimes USB 2.0 and USB 1.1 cables look identical. Your old USB 1.1 cables may still work with some USB 2.0 gadgetry, but not with all. If Windows XP doesn’t recognize your USB 2.0 device anymore, make sure you’re using its own cable, not a leftover from an older, USB 1.1 gadget. • Windows XP no longer recognizes a familiar USB device. When Windows XP suddenly doesn’t recognize your trusty digital camera or other gadget, try unplugging the camera, counting slowly to five, and plugging it back in. Windows XP often recognizes it the second time and begins talking with it. That’s because Windows takes a second or two to recognize a knock at the USB port’s door, both when you first plug in something and when you unplug it. If you unplug and plug back in a device too quickly, you may confuse Windows, keeping it from noticing that you plugged the device back in. • Your PC doesn’t have enough USB ports. Although new PCs often come with six or more USB ports, many older computers pack only two ports. When you find yourself with more gadgets than ports, pick up a USB hub (Figure 1-16). A hub works like a sprinkler system attachment, plugging into one port and splitting the signal into four or more. Be sure to buy a powered USB hub. The $15 to $30 box plugs into a wall outlet as well as a USB port, and supplies extra electricity to any USB devices that need the juice. • Your device doesn’t have enough power. Two of a USB port’s four wires shuttle information to and from a device; the other two supply electricity. The port’s power keeps you from adding batteries to glowing optical mice or clip-on laptop lights. Some devices like cell phones and MP3 players even use USB ports as chargers. Plug one of these gadgets into a port, and after a few hours, the USB port has charged the internal battery. But sometimes a hoggy device wants more power than the port can deliver. USB ports can dish out only a limited amount of power—500mA (milliamps) at 5 volts, to be precise. If a gadget stops working or complains about a loss of power, try plugging it into another USB port to spread the load. If it still complains, your only solution may be a powered USB hub (page 39). By plugging into the wall, the hub’s able to supply your USB accessories with all
38
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
the power they need. Figure 1-17 shows how to see how much power a device is trying to grab, helpful when troubleshooting power problems.
Ports
Figure 1-16: A powered USB hub not only turns one USB port into four USB ports, but supplies extra juice to USB devices that draw a lot of current—usually devices with bright lights, motors, hard drives, or other power-sapping features.
Figure 1-17: To see how much power your USB gadgets draw, click Start ➝ Control Panel ➝ System ➝ Hardware ➝ Device Manager. Click Universal Serial Bus Controllers, and then double-click any of the USB Root Hub entries. On the Power tab, Windows XP displays what’s plugged into that port (a mouse, in this case) and how much power it draws. If it’s over 500 mA (milliamps), it’s overloading that particular USB port.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
39
Ports
FireWire (aka IEEE 1394, i.Link) The groovy sounding FireWire port, popular mostly with digital camcorder buffs, began life years ago inside Apple computers. The super-speedy new port let video hounds quickly pour digital video in and out of their Apple computers. WORKAROUND WORKSHOP
Turning a USB Port into a Different Port Just about every computer accessory plugs into a USB port these days. In fact, some new computers leave out older ports to make room for the more popular USB ports. But if your gadget uses an older port that’s missing from your computer, you can use an adapter to transform a USB port into just about any other port. The USB Gear Web site (www.usbgear.com) sells adapters and cables that let you use USB ports for just about anything. Count on spending between $10 and $25 for each item. The site sells run-of-the-mill gender and size changers, for instance, which are useful when your standard USB cable won’t fit into the smaller USB port on a portable device.
But they also sell adapters that transform USB ports into serial ports for connecting modems, game ports for firing up a joystick or game controller, infrared adapters for wirelessly beaming data with a laptop or PDA, wireless network adapters for connecting to the Internet at coffee shops, and USB cables that let you network two computers on-the-fly, even if they lack network jacks. Many adapters are worth tossing into a laptop bag for those special moments when you find yourself cursing a cable that doesn’t fit.
To weasel out of Apple’s licensing fees, PC engineers renamed FireWire to “IEEE 1394.” (It was the 1,394th standard the Institute of Electrical and Electronics Engineers had published.) Similarly, Sony, a big player in the digital camcorder market, called the port “i.Link,” and includes it on most of their PCs. Most PC manufacturers don’t include the port, although it’s gaining momentum. Whether called FireWire, IEEE 1394, or i.Link, the odd-shaped plugs and ports shown in Figure 1-18 let PCs move information about 40 times faster than a USB 1.1 connection, and just a little slower than USB 2.0. Tip: Connect a FireWire cable between two PCs’ FireWire ports and run Windows XP’s Network Setup Wizard to create a speedy, on-the-fly network (page 449) for exchanging data or sharing an Internet connection.
Troubleshooting FireWire problems FireWire’s fairly dependable. Being “Plug-and-Play,” just like USB, Windows XP usually recognizes the camcorder, scanner, or other accessory as soon as you plug it in. (And if it doesn’t, you need to install the accessory’s driver (page 514). The most common problem comes when your new device—most camcorders (page 164), some iPods (page 209), and some portable hard drives—requires a
40
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
FireWire port and your PC’s missing one. To let them gossip, slip a FireWire card into your PC (page 25); the card adds a FireWire port.
Ports
Figure 1-18: Top: FireWire jacks and ports come in two sizes. The larger, six-wire plug transmits power as it exchanges information. Bottom: The smaller, four-wire plugs lack the two power wires, so those devices need their own power source. Whatever size its port takes, FireWire transmits information at 400Mbps compared to 10Mbps for USB 1.1 and 480Mbps for USB 2.0.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
41
Ports
FireWire cables and jacks use two sizes of connectors. PCs usually favor the larger size jacks (Figure 1-18, top), and portable gadgets prefer the smaller jacks (Figure 1-18, bottom), forcing you to find a FireWire cable with a different-sized plug on each end. Luckily, most gadgets come packaged with the right type of cable, but if yours didn’t, buy an adapter or new cable at a computer store. Warning: Technically, FireWire is hot-swappable, meaning you can plug FireWire devices in and out of your PC without turning off either the computer or the gadget. But some camcorders take hot-swapping literally—producing a spark or short that can fry your camcorder when you plug it in. To be safe, keep your camcorder turned off (the computer can stay on) before you connect or disconnect the FireWire cable. (Sony camcorders are immune to this problem, as their “i.Link” cables don’t transmit any power.)
Ethernet and Phone If your computer has an Ethernet (aka network) port (Figure 1-19, top), you can connect it to a network—a sort of social club that lets computers share information, printers, or, perhaps most important of all, an Internet connection. Since everybody wants to connect to the Internet, most PCs today come with a built-in network port. If your PC escaped the assembly line without one, add it by sliding a network card into one of your PC’s vacant slots (page 25). Or, buy a USB network adapter—a handy converter that plugs into a USB port and sports a network port on its other end. To put your network port to use, you need a network cable (page 413), some surprisingly inexpensive network gear (page 404), and Windows XP’s built-in Network Connection Wizard (page 419). Almost all PCs also come with a phone jack (Figure 1-19, bottom), just like the one on the back of your telephone. The phone jack means your computer contains a modem, handy for connecting to the Internet through a dial-up connection. Most modems can also send and receive faxes with Windows XP’s built-in fax software, described in the online appendix, “Other Cool Things You Can Do Online,” available on the “Missing CD” page at www.missingmanuals.com. To put the modem to work, connect a plain old phone line between your computer’s phone jack and the phone jack in your wall. Subscribe to an Internet Service Provider (page 329), run Windows XP’s Internet Connection Wizard (page 331), and start browsing the Internet. Many people who use dial-up modems eventually purchase a second phone line dedicated to the modem so their family can still make calls and their friends won’t
42
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
always hear a busy signal. Another solution is to switch to broadband service (page 321) if it’s available in your area.
Ports
Figure 1-19: Top: It’s easy to confuse an Ethernet port, used for connecting to other computers as well as the Internet, with the plain old phone jack below. They look almost identical. Even worse, the Ethernet and phone jacks usually sit side-by-side on a computer. However, an Ethernet plug is a tad wider than the phone plug, so it never fits into a phone jack. Bottom: Running a phone line between your phone jack and the phone jack in your wall lets your computer connect to the Internet; some computers even use the phone line to send faxes. Although a phone line’s plug fits into an Ethernet port, it feels loose and won’t snap into place.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
43
Ports
Keyboard/Mouse (PS/2) Most mice and keyboards (Chapter 2) plug into the ubiquitous USB port like everything else. But in the old days, mice and keyboards required their own special ports, dubbed “PS/2” ports after the model of IBM computer that introduced them in 1987. The ports, shown in Figure 1-20, remain useful for people with older, PS/2style mice and keyboards. Figure 1-20: A computing leftover, PS/ 2 ports work with oldstyle mice and keyboards. Although the two ports look identical, the mouse won’t work in the keyboard port and vice versa. To keep the right plug in the right jack, match the plug’s color with the jack’s color. (Keyboards often use green for their plugs and jacks; mice cables often use purple plugs and jacks.)
Although you can leave your computer on when you plug or unplug items from ports, the PS/2 mouse remains the exception. In fact, if your PS/2 mouse cable accidentally falls from its jack, and you quickly plug it back in, your mouse pointer stays frozen in horror on the screen. Press the Windows Key (page 64) to bring up your Start menu, and choose Restart to let the computer recognize your mouse once again.
Sound Most computers route their sound through 1/8-inch stereo jacks—just like the headphone jacks found on iPods and most portable music players. Since the computer’s row of little sound jacks look identical, the hardest part is figuring out what plugs in where. When plugging in speakers, microphones, or music players, look for tiny symbols etched into the metal next to each jack, as shown in Figure 1-21 and the table that follows.
44
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Then, after making sure the sound level’s turned way down (page 221) push each connector into its proper jack.
Ports
Figure 1-21: Frustrating farsighted people worldwide, speakers, microphones, and sound sources plug into closely spaced 1/8inch wide ports. To keep people from accidentally plugging things into the wrong port, manufacturers etch tiny identification symbols next to each port. Plugging a jack into the wrong port won’t damage the equipment, but unless you turn down your computer’s volume beforehand, you may hear some startling noises.
The Symbol
The Connector Microphone Speaker Line In (used mostly for recording audio from prerecorded sources like radios or tape decks)
Joystick/Game Controller/MIDI Port Not many people use their PC’s game port (Figure 1-22) anymore. Today’s crop of joysticks, steering wheels, foot pedals, and game pads plug into the faster and more versatile USB port. Today, the 15-hole female game port primarily attracts musicians, as some synthesizers and other MIDI (Musical Instrument Digital Interface) instruments still plug into the port for recording. If you spot a game port on your PC, it’s probably attached to your PC’s sound card.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
45
Ports
Musicians, too, are beginning to abandon the game port as they ditch MIDI for digital recording, and migrate to the much faster FireWire port. Look for the game port to sink deeper into the Computing Port Graveyard in the coming years. Figure 1-22: Older joysticks and some musical instruments still plug into the game port, found mostly on sound cards or older computers.
Serial and Parallel Ports A leftover from computing’s early years, a serial port (Figure 1-23) still looks frightening, with nine sharp pins protruding from its D-shaped metal hoop. Years ago, dial-up modems suckled up to the port, to let people connect to the Internet. Today, almost all PCs come with built-in modems, leaving the serial port to collect dust and poke stray fingers. Another vestigial tail of computing, the parallel port (also Figure 1-23) resembles an elongated nub with 25 holes. Speedy in its day, the parallel port once connected to nearly every printer and quite a few scanners. Today, printers and scanners attach through the more versatile USB port (page 34). Printers and scanners both prefer the faster USB 2.0 port rather than the older USB 1.1 port. If the cable of your printer or scanner doesn’t fit into your USB port, chances are it’s supposed to plug in the parallel port. Garage sale addicts still use the two ports to wring a few more ounces of life out of their aging printers, scanners, portable organizers, bar code readers, and other early issue computing doodads. A small but enthusiastic crowd of hackers and
46
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
hobbyists rewire their PC’s slow-but-versatile serial ports to work with home-built robots, small trains, backyard monorails, light controllers, and other creations.
Power Supply and Battery
Figure 1-23: Most people don’t use their PC’s serial port (left) or parallel port (right), shown above the oldschool PS/2 ports for the mouse and keyboard. Almost everything that once plugged into these two ports now plugs more conveniently into a USB port. A few old (and dreadfully slow) modems still plug into the serial port, and some old printers and scanners still use the parallel port.
Power Supply and Battery Your computer’s power supply lives inside the PC’s case, where it converts the wall outlet’s 120 volts into the lower voltage sucked up by your computer’s parts. It needs attention only during two main events: if you spot a ton of dust clogging its main fan, and when your PC refuses to turn on. A few swipes with a vacuum
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
47
Power Supply and Battery
cleaner’s brush attachment (page 15) solves the first problem, but the second one is much more complicated. Luckily, most people never need to tackle replacing their power supply; the computer usually wears out first. Note: Don’t confuse a PC’s power supply with an Uninterrupted Power Supply (UPS). The PC’s power supply is a small box that lives inside your PC. A UPS (page 546) is an optional add-on, usually in the form of a large, heavy box that sits outside your PC to protect your work from power outages.
If your desktop PC’s power switch doesn’t seem to have any effect, do what the techies do: put your ear to the computer case and listen closely for any sounds. Normally, turning on the computer starts the power supply’s whirling fan. But if you can’t hear the fan blowing air over your PC’s parts—nor any other noises inside your PC—then the power supply is dead and must be replaced. Before jumping to this unpleasant and rare conclusion, try a few sure-fire tests: • Press the power button for about 10 seconds, and then wait another 10 seconds. Then press the power button again. Repeat. Sometimes that’s all it takes to resuscitate a frozen PC. • Juggle the power cord in its outlet, and where it plugs into the back of your PC. It may be loose. • Check the little red switch on the back of your PC to see if a practical joker has switched it to 220 from 110 (see page 53). If you’re still seeing no signs of activity, your power supply is dead. In fact, if the power supply’s fan stops working but your computer still runs (page 16), you still need to replace the power supply. Without the power supply’s cooling fan, your computer will overheat, leading to even more expensive repairs. When your power supply needs replacing, the next section explains how to handle the chore. Warning: Even after you unplug the power supply, its internal capacitors store up dangerous amounts of electricity. Don’t try to pry open the power supply’s case and repair it yourself. You have to replace—not repair—the power supply.
Replacing a Dead Power Supply Yes, even unplugged power supplies contain dangerous amounts of electricity. And yes, replacing one sounds like a stunt from a reality TV show. However, the dangerous parts are sealed inside the power supply’s metal box, away from sensitive fingers. Many people prefer the convenience of letting a repair shop handle the job of performing this transplant procedure. Replacing the power supply yourself, however, saves money, results in a better power supply, and gives you a conversation starter at cocktail parties. If you’re handy with a screwdriver, your first step is choosing the right replacement. 48
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
When shopping for a replacement power supply, you need to know the replacement’s proper wattage, which is the maximum amount of power it can feed to your PC. You also need to know its physical size, so it screws back into the same place as the old one.
Power Supply and Battery
TROUBLESHOOTING MOMENT
Quieting a Noisy PC Newer PCs sound much quieter than older models, but you’ll almost always hear a constant whine. The biggest noisemakers? The fans that cool the sweat from your PC. The biggest (and noisiest) fan cools your power supply; another cools your CPU. And if your computer’s built for games or other demanding graphics software, a third fan cools your video chip. Some even add a fourth fan to cool the hard drive.
Replacing the power supply gives you a great chance to shush your computer. The two prime power supply vendors, PC Power and Cooling and JS Custom PCs, sell quiet models with high-quality ball bearing fans, extra insulation, and other ways to dampen the noise. Building the Perfect PC (O’Reilly) lists more information about quieting a noisy PC when building one from scratch.
Finding the replacement’s correct wattage If you haven’t upgraded your PC with additional parts, buy a replacement power supply that’s the same wattage as your old power supply. Look for your old power supply’s wattage, usually between 200 and 300 watts, stamped on a sticker along its top or side. You may need to first remove the power supply from the computer case (page 12) to see the sticker. But if you’ve upgraded your PC, especially by adding a faster video card or extra drives, your original power supply probably isn’t dishing out enough wattage. In fact, the upgrade’s extra drain may have put the final knife into your old power supply’s ailing heart. How then do you know how many watts to buy for your replacement? To answer this admittedly difficult question, vendors like PC Power and Cooling (www.pcpowerandcooling.com) and JS Custom PCs (www.jscustompcs.com) offer free online wattage calculators. If you check off your PC’s main parts on the Web site’s form, the site tallies up your computer’s wattage requirements. Tip: Google the phrase “power supply wattage calculator” to find similar wattage calculators and compare notes.
When in doubt, buy a replacement with more wattage than you need, despite the higher cost. For an extra 20 to 40 bucks, those extra watts offer room for future upgrades, as well as peace of mind. Plus, buying a high wattage power supply isn’t like replacing all your nightlights with 100-watt bulbs. Your computer draws different amounts of power depending on its current task, so the power supply dishes out only what the computer currently needs. If your computer doesn’t need extra power, the power supply won’t suck extra power from your outlet.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
49
Power Supply and Battery
Buying a replacement power supply that fits your case Power supplies come in several sizes, but the vast majority use a size called ATX, named for the Advanced Technology eXtended moniker that Intel slung onto its motherboards in 1995. If your computer’s strong enough to run Windows XP, it’s probably using an ATX power supply, widely available both online and at computer stores. Your computer’s packing slip, the sticker on the old power supply, or the PC manufacturer’s Web site (page 9) can usually tell you what size you’re looking for. Searching online for the power supply’s part number (found on its sticker), often turns up a vendor for hard-to-find power supplies, as well. POWER USERS’ CLINIC
A Power Supply’s Voltage and MTBF The power supply converts the standard 120 or 240 volts of AC power into the lower DC voltage your computer needs. Circuits, like those in the memory and motherboard, want either 3.3 or 5 volts, but the moving parts (drive motors and fans) insist on 12 volts. Power supplies come rated mostly by MTBF (Mean Time Between Failures). A MTBF rating of 100,000 hours means the manufacturer estimates it will die after constantly powering your PC for about 11 years under ideal conditions.
If you’ve blown through several power supplies, call your electric company and ask them to test your outlet for power fluctuations. These electrical spikes can reduce the power supply’s life considerably. Also, plugging a computer into a UPS (Uninterruptible Power Supply) filters the line, prevents voltage spikes, and lets you wring the most life from your power supply.
For a higher quality replacement—one bearing both an accurate wattage rating and a long life—buy from a third-party vendor like JS Custom PCs or PC Power and Cooling. Warning: Many Dell computers don’t use standard power supplies, and the voltage difference can toast your computer’s motherboard. When replacing a Dell PC’s power supply, make sure the replacement is designed specifically for a Dell computer.
But if you’re having trouble finding a replacement, call your PC’s customer support number and buy a replacement directly from the manufacturer. Although the power supply won’t be as high-quality or quiet as one from a third-party manufacturer, you’ll still save money by installing it yourself. Warning: Don’t skimp when replacing your power supply. It feeds electricity to every part in your computer. High-quality power supplies keep the power flowing at a constant rate; cheaper ones can cause subtle fluctuations that shorten the life of your PC.
50
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Replace the old power supply After opening your computer case’s (page 12), look in the back of the computer for the three or four screws surrounding the topmost fan. (That fan, located adjacent to the power cable, lives inside the power supply itself.) Inside your computer, usually near the top, the power supply clings to the back wall with those screws. The power supply lives in a gray metal box that has dozens of colored wires poking out of it (see Figure 1-4). When you find the power supply, follow these steps to remove it and install the replacement.
Power Supply and Battery
1. Remove the power cord between the computer and the wall, and then unplug all of the power supply’s cables and connectors. Remove the PC’s power cord first, both from the wall outlet and from where it pushes into the power supply. Next, look inside your computer to find the thick bundle of wires protruding from the power supply. Locate where the wires plug into your motherboard (Figure 1-24) and into your drives (Figure 1-25). Tip: As you unplug wires, consider drawing a quick diagram of how the various plugs fit into their jacks so you can push the new ones into the same places.
First, remove the largest plug from its jack on your motherboard, shown in Figure 1-24. If you spot any other plugs or wires leading from your power supply to the motherboard, unplug them from the motherboard, as well. Figure 1-24: The power supply’s largest plug provides power to the motherboard, where it’s shuttled off to other parts as required. To remove it, pinch in the little latch on one side of the plastic connector and pull the connector straight up. (Don’t tug on the wires, no matter how tempting.) The plug fits into the motherboard’s jack only one way, with the plug’s latch clasping onto the motherboard jack’s latch.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
51
Power Supply and Battery
Note: When removing or inserting plugs into jacks, pull on the plastic connector, never on the wires. Too much stress on the wires may pop them out of their connectors. (If a pair of needle-nose pliers can’t put the wires back into the connector, bring your PC to the repair shop, beg for mercy, and ask them to refasten the wires with their “Molex Pin Extractor” and “Molex Crimp Tool.”)
Next, remove the smaller plugs (called Molex connectors) from their sockets on the back of your drives, shown in Figure 1-25. Finally, disconnect any cooling fans that connect to the power supply—you sometimes find fans cooling highpowered video cards, as well as the CPU. Figure 1-25: Most drives connect to the power supply with the large plastic Molex connector. Be sure to grip the plastic connector itself, not the wires, which can pull out of the plug amid much cursing. The Molex connectors sometimes take a little sideways motion to loosen their grip. The connectors reattach to the drives only one way, so you can’t plug them in the wrong way.
2. Remove the screws holding the power supply to the case, and remove the old power supply. Locate the screws surrounding the fan on the outside of the case. Depending on your PC’s model, remove two, three, or four screws. Save the screws in an egg carton or ice cube tray. You may need to snap off plastic cooling vents—large snap-on molded plastic shafts that direct the air around the CPU. Save the vents for the new power supply. 3. Attach the new power supply. Locate the screws you removed in Step 1 and attach the new power supply. The holes in the power supply line up exactly with the holes in the case; if they don’t, your power supply is upside down, sideways, or the wrong size. Reattach any plastic cooling vents you removed earlier.
52
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
4. Set the correct voltage for your country. A little red switch beneath the power outlet, shown in Figure 1-26, lets you set the voltage to either 110/115 volts (North America and Japan) or 220/230 volts (most European countries). If necessary, flip the power supply’s little red switch to match your country’s voltage.
Power Supply and Battery
Figure 1-26: A little red switch on the back of the power supply lets you toggle the voltage between 110/115 to 220/230. Although it’s usually set for 110/115, many countries manufacture and sell power supplies. If it’s not set to your correct voltage, use a little screwdriver to flip the switch so your correct voltage shows.
5. Attach the new power connectors to their jacks. Reattach the wires to the motherboard, your drives, and any cooling fans. When finished, plug your old power cable into the back of your power supply. (Most power supplies don’t come with new power cables.) Don’t plug it into the wall yet, though. Don’t be surprised to see some of your power supply’s wires dangling unused. They’re for upgrades you may install later. 6. Reattach the case panel, plug in your PC, and turn it on. Your PC should whir back into action. If it doesn’t, turn it off and make sure you fastened your motherboard’s connectors tightly in the right places. Try pushing the power cord tightly into the back of your computer, too; sometimes that doesn’t make a good connection. If your PC still doesn’t turn on and you don’t even hear the power supply’s fan, somebody sold you a dud. Exchange it for a new one.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
53
Power Supply and Battery
When you’re sure the new power supply works, feel free to throw away the old one. (Some hobbyists save them in case they need to salvage a Molex connector.)
Replacing the Motherboard’s Battery Just like a cheap pocket calculator, your expensive PC contains a battery. Without it, your PC would forget the date, time, and the names of its parts whenever it’s unplugged or loses power. Batteries last a fairly long time—from three to seven years. The first symptom of a dead battery? Your PC complains about its amnesia when turned on, leading to odd error messages occasionally mentioning the words BIOS or CMOS (page 522). Luckily, replacing the motherboard’s battery is a cheap and easy fix. Tip: Most motherboards use 2032 lithium batteries, an inexpensive battery about the size of a quarter. Since your motherboard probably uses one, too, save time by picking up a replacement 2032 battery at a nearby camera store, electronic supply store, or even a drug store.
1. Turn off the computer and remove its side panel or case (page 12). 2. Locate the motherboard’s battery. A small round silver disc (as shown in Figure 1-27), the battery usually lies flat in a small plastic holder. Figure 1-27: A flat, round battery on the motherboard lets computers remember the time and date when you unplug them. To replace the battery when it’s dead, pop it out of its holder and push in a new battery, available at most computer shops, drug stores, and office supply stores.
54
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
3. Remove the battery. Note which side of the battery faces up, so you can insert the new one the same way. Next, unlatch the battery and lift it from its holder. Sometimes just pressing down on one edge of the battery pops it from the holder.
Power Supply and Battery
4. If necessary, buy a replacement battery that matches the old one. Most, but not all, computers use 2032 lithium batteries. (The number’s stamped onto the battery’s flattest surface.) If you haven’t already bought a replacement, buy one now. 5. Install the replacement battery. Push in the new battery facing the same way as the old battery—usually with the numbers facing up—or your motherboard won’t recognize it. Most battery holders won’t let you insert the battery the wrong way. 6. Close the computer’s case. Reattach the side panel, if your PC uses one, and then reattach the screws or thumbscrews to hold it in place. When your PC boots up with a newly installed battery, it may still display confused words about “Setup” or “New Devices.” But after automatically identifying its parts once again, the computer memorizes them until the battery dies again, anywhere from 5 to 10 years later. LAPTOP LIFE
Replacing a Laptop’s Batteries Unlike PCs, most laptops don’t use batteries on their motherboards. However, a laptop’s power battery dies after several years of heavy use. To replace it, push a release latch on your laptop’s case, and slide out the battery. Buy a replacement battery from either
your laptop’s manufacturer or a third-party like FedCo Electronics (www.fedcoelectronics.com). Don’t be surprised at the high price. Laptop battery replacements usually cost at least $100.
Chapter 1: Inside Your PC PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
55
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
chapter
Chapter 2
2
Keyboards and Mice
You can try reasoning with your PC all you want, but computers rarely take notice until you tap your fingers across the keyboard or nudge the mouse on your desk. This chapter explains the intricacies of those two primal, yet very effective, ways of getting your computer’s attention. This chapter introduces the various types of keyboards and mice you can use with desktop and laptop PCs, and which ones to choose for different situations—an ergonomic keyboard with an adjustable tilt, for instance, if typing hurts your wrists or fingers. You’ll learn how to manipulate both mice and keyboards to their best advantage, and how to adjust them when they’re not performing to your satisfaction. In case your mouse dies, one section explains how to continue working in Windows with only a keyboard. Should your keyboard die, you’ll want to review the section that shows you how to finish up your typing with only a mouse. You’ll also uncover the mysteries behind certain keys like “Scroll Lock” (which doesn’t actually work), and how to transform a foreign country’s keyboard into something that does work. Finally, for those times when you’re ready to completely stop working, the section on game controllers explains calibration, which may give you an edge when playing the kid down the street. (Doubtful, but it’s worth a try.)
Keyboard Basics Most people type on 83-, 101-, 102-, or 104-key keyboards. But if it’s time for a new one, don’t worry about having to choose from all these variations: buy the 57
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Keyboard Basics
standard 104-key model, which has been standard issue on most new computers since 1995. The 104-key keyboard contains the four familiar clusters of keys shown in Figure 2-1, each used for the tasks described below.
Function keys
Dedicated keys
Typing area
Cursor keys
Numeric keypad
Figure 2-1: Your keyboard divides its keys into four main groups, each used for different tasks. Your fingers do the bulk of their work tapping letters and numbers in the typing area. The Function keys control different features in different programs; press F11 in Internet Explorer, for example, to fill the entire screen with your currently viewed Web page. The Cursor keys move your “insertion point”— that blinking line that shows where the next key you press will appear onscreen. The Numeric keypad, every bank teller’s friend, lets you quickly enter numbers with one hand. Some manufacturers also add a row of dedicated keys—you can press a key to skip forward on CDs, for instance.
Tip: When shopping online for a mouse or keyboard, look in the “Input Devices” section, since that’s the official category name for these products.
• Typing keys. Most of the time, your fingers tap on the typing area, which mimics the layout of typewriters (mechanical devices often seen in black-and-white movies). Notice the little bumps on the base of the keyboard’s “F” and “J” keys. By feeling for those bumps with your index fingers, you can correctly position your hands on the keyboard without having to look at your fingers. (This trick comes in handy, for example, when typing in dimly lit rooms.) • Function keys. Pressing a Function key usually calls up a different task in every program, so you can’t simply memorize these 12 keys and be done with it. However, a handshake agreement among programmers means that the F1 key brings up the help screen in nearly any program. Even better, pressing F1 is
58
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
usually context sensitive, meaning it summons help for the specific item you’re viewing. Pressing F1 while you’re ogling the Control Panel’s Keyboard settings, for example, brings up a help topic that explains the subtleties of that specific area.
Keyboard Basics
• Cursor keys. The cursor (also called arrow) keys move the insertion point—that slowly blinking vertical line showing where your next keystroke appears. Press the cursor keys to move the insertion point slowly, or press the keys above it— Home, End, Page Up, or Page Down—to move it by leaps and bounds. Pressing Home in Microsoft Word, for instance, moves your insertion point to the beginning of your current line; pressing End moves it to the line’s end. To move to the document’s first word, press Ctrl+Home; to move to the document’s last word, press Ctrl+End. Tip: For precise editing while word processing, hold Shift while pressing the left or right cursor keys. Doing so highlights items character by character.
• Numeric keypad. The numeric keypad, which is on the far right side of the keyboard, helps righthanded typists quickly enter numbers into documents or spreadsheets. Lefthanded typists can enter keys from the left side with a plug-in USB (page 34) numeric keypad for around $20 from Amazon (www.amazon. com) or USB Gear (www.usbgear.com). Pressing the NumLock key toggles the keypad between numbers and cursor keys. Every time you turn on your computer, the NumLock light (above the keypad) is illuminated, indicating that the numeric keypad is active. If you don’t want this to happen—that is, if you’d prefer that the numeric keypad automatically start in the cursor-key-on position—you need to change a setting in your computer’s BIOS (page 525). Tip: When balancing the checkbook or performing other math chores, peck at the numeric keypad to control Windows’ built-in calculator (Start ➝ All Programs ➝ Accessories ➝ Calculator). The asterisk multiplies; the slash divides.
Some keyboard manufacturers toss in a row of dedicated keys along a keyboard’s top edge. The keys’ functions vary among manufacturers and keyboard models, but most offer one-button access to your e-mail and let you skip tracks on a CD, change your PC’s volume level, and so on.
Types of Keyboards Just as some people are picky about their pillows, some people remain faithful to certain styles of keyboard. Keyboard manufacturers sell a variety of styles to please many
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
59
Keyboard Basics
tastes. Most computer and office supplies stock four main keyboard styles, each described below, although some styles merge several categories to create their own. LAPTOP LIFE
Coping with a Laptop’s Keyboard Laptop manufacturers made several concessions to make laptops smaller than breadboxes. Early models shrunk a standard, desktop-sized keyboard to bean-sized nubs. When that idea bombed, manufacturers enlarged the keys, but stripped the keyboard’s right half, dumping the numeric keypad and many cursor keys. Most stick with that format today. However, your laptop’s numeric keypad and cursor keys still live on the keyboard, but in disguise. To see them, locate your laptop’s “Fn” key; it works double-duty, just like pressing Shift creates a capital letter. For instance, press Fn followed by the Up or Down cursor key to mimic the PageUp or PageDown key. Some keyboards even toss in
some keys specific to the laptop’s model. Pressing Fn+F3 on a Sony Vaio mutes the sound, for instance; Fn+F5 changes the screen brightness. Similarly, pressing NumLock on a laptop embeds a numeric keypad within the keyboard, with the 7, 8, and 9 keys becoming the top row. Look below those three to see the other keycap’s double duty keys. The odd slant of a laptop’s embedded numeric keypad turns off many people, however. If you miss your desktop’s full-sized keypad, consider buying an add-on USB keypad (page 34) for about $20. Finally, if some of your laptop’s keys suddenly begin producing numbers instead of letters, press the NumLock button to toggle them back into letters.
• Cheap. People who rest comfortably with hotel room pillows may simply grab the cheapest keyboard. Often disguised with names like “value-priced,” these standard, 104-key models last a surprisingly long time for their small price tags. Most come with USB (page 34) or PS/2 (page 44) connectors, and work with nearly any PC. • Ergonomic. If long-term typing bothers your hands or wrists, try the skewed tilt of an ergonomic keyboard, as shown in Figure 2-2. Microsoft popularized the ergonomic keyboard in 1995, dubbing their new model “The Natural Keyboard. ” Instead of being straight and flat, ergonomic models angle the keyboard into a slight V shape, complete with a wrist rest, to reduce or prevent repetitive strain injury and carpal tunnel syndrome. Some people dislike the keyboard’s fixed tilt, preferring more expensive ergonomic models with adjustable tilts. Fentek 60
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
(www.fentek-ind.com) sells a wide variety of ergonomic models with both fixed and adjustable tilts.
Keyboard Basics
• Wireless or cordless. If too many cables clutter your desktop, a wireless keyboard (often sold as a combo with a wireless mouse) substitutes radio waves for messy cables. Unrelated to wireless networks (page 406), wireless keyboards use different technology. Instead of hooking up to a network, a wireless keyboard comes with its own proprietary receiver unit that plugs into a USB port, giving you a range of around four to six feet between the receiver and keyboard. Popular with some gamers, wireless models let you lean back in your chair with your keyboard in your lap. Should you lean too far back in your recliner, a popup message warns you that the keyboard’s out of range. Receiver units use proprietary communication standards, so your old receiver probably won’t work with your new wireless keyboard. Figure 2-2: Designed to make typing as painless as possible, Microsoft’s Natural MultiMedia keyboard includes features from two main keyboard types. Its ergonomic, Vshaped layout slightly angles the keyboard’s left and right sides. A wrist rest along the bottom adds support during long typing sessions. The keyboard also hails from the multifunction school, as it includes dedicated buttons along the top to control the Windows Media Player and fetch frequently accessed programs and folders— Windows Messenger, Internet Explorer, My Documents, and others.
Tip: Besides reducing cable clutter, plastic cable ties or tubes are less expensive and more reliable than wireless keyboards and mice. Available at most computer and office supply stores, the ties and tubes convert cable spaghetti into one thick noodle that’s easier to tuck behind a table leg until it enters your computer.
The latest wireless keyboards ditch radio waves in favor of Bluetooth (page 452), a similar cable-replacement technology. Since few computers come with Bluetooth built-in, add it by plugging a Bluetooth adapter (available on Amazon for about $30 to $40) into one of your PC’s USB ports (page 34).
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
61
Keyboard Basics
When shopping for an office environment, buy a wireless keyboard/mouse that uses encryption technology. You don’t want the techie in the adjacent cubicle reading your love letters as you type them. • Multifunction. Multifunction keyboards jack up their price tag by adding extra goodies: built-in speakers, dedicated keys, extra USB ports, trackballs (page 73), thumbprint recognition systems, and other doodads. If you buy one, be sure to download the keyboard’s latest drivers from the manufacturer’s Customer Support area so Windows XP can recognize the extra features. And beware—that keyboard’s drivers may not be compatible with the next version of Windows, which could turn your expensive multifunction keyboard into a plain $15 keyboard. Although many keyboards sport USB ports (page 34) along their sides, some of those USB ports aren’t powered. They’ll work fine for things like a mouse. But USB gadgetry that requires power, like clip-on keyboard lights, cooling fans, or wireless mice, may not work in your keyboard’s USB ports. If your gadget doesn’t work in the keyboard, and your computer’s out of USB ports, plug the power-hungry device into a powered USB hub (page 39). When keyboard shopping, don’t just look at the picture on the box or read the description. Take the keyboard out of its box, put your fingers on it, and start typing. Feel the weight of each key press, its responsiveness, and the sound it makes. You don’t need to attach it to a computer while testing, since most judgments come down to whether a keyboard “feels right.”
The Mystery Keys A few keys seem strangely out of place on a computer keyboard. Some keys atop the cursor area (Figure 2-3) furrow many brows, as they don’t appear to do anything. The mystery is unraveled below: Figure 2-3: Found on nearly all computer keyboards since day one, these keys are leftovers from the mid-80s. Windows still uses the PrintScreen (PrtScr) key, but the SysRq, Scroll Lock (ScrLk), and Pause/Break keys no longer work in the vast majority of Windows programs.
• PrtScr/SysRq. In the pre-Windows days, a tap on PrtScr sent a picture of your visible screen to the printer for passing around at the board meeting. Today, that key routes the same picture to Windows Clipboard, a temporary storage area for pasting the picture into other programs. (Press Alt+PrtScr to send a picture of the current window to the Clipboard; this is the method used to grab 62
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
many windows in this book.) If you’re desperate for a paper copy of what you see on your screen or in a window, paste the Clipboard’s contents into any graphics program—press Ctrl+V while in Windows Paint program, for example—and press Ctrl+P to print the image from there. (Actually, you can even paste most screen Clipboard pictures into Word, which can save you from opening a separate graphics program.)
Keyboard Basics
FREQUENTLY ASKED QUESTION
QWERTY, Meet Dvorak What’s a Dvorak keyboard? Any typing student can tell you that a keyboard’s haphazard layout doesn’t make much sense. But it did in 1873 when Remington needed a way to keep their new mechanical typewriter keys working smoothly. To reduce key jams, the company separated commonly used pairs of letters on opposite sides of the keyboard. This “QWERTY” keyboard layout, named after the first six letters in the keyboard’s top left row, still lives on in computers today. Typewriters had overcome their early design hurdles by the mid-1930s, when Dr. August Dvorak designed a new layout specifically for speed and efficiency. The new so-called Dvorak layout placed vowels and other frequently tapped keys on the “home row” where your fingers normally rest. The QWERTY layout lives on today, mainly proving that typists despise learning new layouts. A few enthusiasts cling to the Dvorak method, however, and some people use other Dvorak layouts designed for one-handed typists. If you’re willing to make the switch, Microsoft offers downloads and instructions for all three Dvorak layouts at its Accessibility Web site (www.microsoft.com/enable).
To convert your keyboard from QWERTY to Dvorak in Windows XP, choose Start ➝ Control Panel ➝ Regional and Language Options ➝ Languages tab ➝ Details ➝ Add ➝ Dvorak. Choose the newly added Dvorak from that page’s Default Input Language box, and then click OK. Adding the Dvorak layout (or a layout for any foreign language, for that matter) places a new icon—the Language Bar—on your taskbar. Click the Language Bar icon to see a menu listing all your currently installed layouts. Click the one you want, be it Dvorak or QWERTY, and Windows instantly accommodates you by rearranging your keyboard layout. (Touch typists don’t care that the keycaps themselves don’t change.) To switch back to QWERTY permanently, highlight the Dvorak entry from where you first created it (back on the Languages tab), choose Remove, and then click Apply. That eliminates your choice of layouts, and the Language Bar icon vanishes, leaving you back at QWERTY.
Don’t bother puzzling over the barely pronounceable SysRq, the key’s bottom half, as it doesn’t do anything. (Linux, a competing operating system popular with techies, resurrects SysRq as an escape hatch to resuscitate frozen computers.) • Scroll Lock. Almost all programs ignore this key. Microsoft Excel, the holdout, still lets Scroll Lock work as it did in pre-Windows days: press Scroll Lock to scroll through your mammoth spreadsheet with the arrow keys rather than mousing with the more traditional scroll bars along the spreadsheet’s sides. Press Scroll Lock again, and the arrow keys revert to moving your cursor, rather than your entire spreadsheet.
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
63
Keyboard Basics
• Pause/Break. A holdover from the telegraph era, the Break key’s on the verge of extinction. But programmers still use it in “command-line” mode—a text-only mode that gives techies fuller control over their computers. When rivers of onscreen text flow past, press Pause/Break to pause the flow while you catch your breath. Press any key to continue the flow. Holding down the Windows logo key while pressing Break brings up the System Properties box (page 499), just as if you’d chosen System from the Control Panel. Note: Although most Windows programs completely ignore the Esc (Escape) key, a few programs return to their “normal” view when you press the key. For instance, pressing Esc switches Adobe Reader—a viewing program for documents stored as PDF files—from a full-screen view to its normal window view. Esc also closes Windows’ Start menu, and other open menus.
The Windows Keys Some people work more quickly when their fingers stay on the keyboard—mouse be damned. These mouse haters appreciate Microsoft’s addition of special “Windows” keys to its latest keyboard model in 1995. Other keyboard manufacturers played copycat, and now almost every modern keyboard sports the Windows logo key and the Application key, as described in Table 2-1. These two keys provide quick access to common tasks—calling up the Start menu and navigating its submenus, for instance, rather than having to reach for the mouse to click the Start button. Table 2-1. The Meaning of Microsoft’s “Windows Keys”
Function
Keystroke
Press either one of the two Windows logo keys, located below the left and right Shift keys, to bring up the Start menu, just as if you’d clicked the Start button. The Application key, located by the right Shift key, brings up the same menu you see if you right-click the cursor’s current location. Tip: If you find yourself accidentally hitting the Windows logo key when reaching for the Shift key, you can disable either one or both Windows keys with a small program from John Haller’s Web site (http:// johnhaller.com/jh/useful_stuff/disable_windows_key/). (Some people simply pry off the offending keyboard button caps, leaving a low-profile stub.)
A press of the Windows logo key followed by another key creates shortcuts for several common tasks, as explained in Table 2-2.
64
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Table 2-2. Windows logo key shortcuts
Keyboard Basics
Function
Keystrokes
Minimizes all open windows and displays your desktop (a great way to find a buried icon). Repeat to place the minimized windows back on the desktop.
+D
Rarely used. This shortcut minimizes all windows like but without a toggle to put them all back.
+M
Rarely used. This restores windows minimized by (Stick with the easier-to-remember +D toggle.)
+D, +M.
+Shift+M
Brings up the Search program for locating files, folders, networked computers, or people.
+F
Opens My Computer in Explorer view for seeing files in a “tree” setting.
+E
Opens Display System Properties (the same as choosing System from the Control Panel).
+Break
Displays the first page of Windows XP’s Help and Support menu. (Pressing F1 by itself brings up the more helpful context-sensitive (page x) help screen.)
+F1
Handy when stepping away from the keyboard, this quickly displays Windows XP’s Welcome screen, forcing people to type a password for re-entry (unless your account isn’t password-protected [page 478] of course).
+L
Note: Although most desktop and laptop keyboards include a Windows logo key, many IBM ThinkPads leave it off. Instead, ThinkPads come with a program with the unfriendly name of TpKMapAp, which you can use to convert the rightmost Alt key to a Windows key.
The Ctrl+Alt+Del Cure for Frozen Programs When one of your programs freezes on the screen, pressing the Ctrl+Alt+Del keys simultaneously provides a handy way to pry the troublemaker off your screen. That magic key sequence brings up Windows XP’s Task Manager (see Figure 2-4), which is useful for not only killing frozen applications, but also for viewing technical details about your computer to help diagnose problems. To kill the program, click the Task Manager’s Application tab, right-click the problematic program, and then choose End Task. Windows XP whisks the program off your screen. You lose any unsaved work from the misbehaving program, unfortunately, but at least your computer and your other open programs stay up and running.
Controlling Windows with only a Keyboard Faced with a broken mouse? Wireless mouse lose battery power or disappear behind a couch? Loath your laptop’s touchpad? Looking for a quick keyboard shortcut? You can completely control Windows without ever touching a mouse by following these tips. Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
65
Keyboard Basics
• Launch programs. Press to launch the Start menu, and then press the arrow keys to navigate to the program you’re after. Highlight your program’s name, and then press Enter to launch it. (Should you press by mistake, press Esc to close the Start menu and return to your work.) • Move from one window to another. Hold down Alt and press Tab. Each subsequent press of Tab moves to the next window (including minimized windows sitting on the taskbar). Let go of the Alt key when your window is highlighted, and Windows lets you work in that window. Figure 2-4: Pressing Ctrl+Alt+Del brings up the Task Manager, which lets you zap frozen programs by rightclicking them and then choosing End Task. The Processes tab shows all the currently running programs, including ones running in the background. Click the Performance tab to see a graph displaying how hard your CPU (page 16) is currently working. The Networking tab graphs the amount of traffic on your network (if you’ve got one), and the Users tab reveals the names of people logged onto your computer, including people accessing your PC from across the network.
• Access a window’s menus. Press the Alt key to see an underlined letter in every option of the current program—“File” has an underlined “F,” for instance. Press one of the underlined letters to see that category’s drop-down menu; for example, press F to see the File menu’s options. Press any underlined letter in
66
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
the drop-down menu to activate that option. For instance, press Alt, F, and O in most programs to open a file.
Keyboard Basics
• Move a window or change its size. Press Alt+Spacebar to see a little menu drop from the window’s top, left corner. (If the window’s maximized—filling the screen—press R to turn it into a window.) Then you can do either of two things: — Change the window’s location. Press M (for Move) to move the window around your desktop with the arrow keys. When you move it to the new location, press Enter to drop it in place. — Change the window’s size. Press S (for Size) to change the window’s size with the arrow keys. When the window’s resized appropriately, press Enter; Windows reverts its attention back to the window’s contents, not its borders. • Right-click something. Tap the arrow keys until you position the cursor where you want to right-click. Pressing the Application key (page 64) works like rightclicking that item, and summons the shortcut menu. • Restart your computer. Should your mouse die in the middle of a Windows session, restart your computer from any window by pressing these keys: ➝U➝ R. If a closing program asks if you’d like to save your work, press Y to save it. Should your monitor ever die in mid-session, leaving you with a blank screen, press ➝ U ➝ R for a graceful exit. Since you can’t see the screen, press Y every 5 or 10 seconds to save any work as the programs close themselves down. Tip: Should your keyboard die before your deadline, page 74 explains how to continue working in Windows XP using only a mouse.
Typing Symbols Frustrating novelists, bankers, mathematicians, and trademark attorneys worldwide, the computer keyboard leaves out common symbols like ©, £, ®, and hundreds of others. Windows handles those extra symbols with an Alt code—a bit of programming wizardry that summons symbols when you type in certain number combinations. For instance, to type © into your novel’s title page, hold down the Alt key while typing the numbers 0169 on your keyboard’s numeric keypad. Release the Alt key, and the © symbol magically appears in your text. (NumLock [page 59]) must be toggled on for this trick to work. Also, you need to hold down Alt while typing the numbers—including the zero at the beginning. And no, typing the numbers along the keyboard’s top row won’t work.) Admittedly, these restrictions are way too much for casual novelists to remember. That’s when Windows’ Character Map program, shown in Figure 2-5, simplifies the process. To call Character Map from its hiding place, click Start ➝ All Programs ➝ Accessories ➝ System Tools ➝ Character Map. When you find the symbol or character you’re after, double-click it. Then use Ctrl+V or Edit ➝ Paste to insert it into your document. Character Map also Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
67
Keyboard Basics
displays the highlighted symbol’s Alt code in the window’s bottom right corner; feel free to jot it on a sticky note for future reference, along with the words “Use Numeric Keypad.” Figure 2-5: Character Map simplifies entering hundreds of symbols like the ones used to designate copyright, trademark, foreign currencies and alphabets, and scientific symbols. Double-click the symbol you need, and paste it into your document by pressing Ctrl+V.
Tip: Choose Wingdings or Webdings from the Character Map’s Font box for many other common symbols: arrows, smiley faces, squares, triangles, clock faces, stars, and more.
Using Keyboards in Foreign Countries No matter how inconvenient it may be to tourists, keyboards in foreign countries use layouts that match the country’s native language, sprinkling foreign characters across the keyboard. When you encounter an unfamiliar foreign layout in an Internet Café, switch to the English layout for easier typing: click Start ➝ Control Panel ➝ Regional and Language Options ➝ Languages tab ➝ Details ➝ Add ➝ English (United States) ➝ OK. Choose the newly added English layout from that page’s Default Input Language box and then click OK. Click the small Language Bar when it appears in your taskbar (shown in Figure 2-6), and click the English layout to quickly switch to your familiar key locations. Since the keyboard’s actual keys don’t magically reposition themselves, this trick works best for touch-typists. If you need to see the letters on the keyboard in their familiar layout for reference, Microsoft’s On-Screen Toolbar (page 74) provides a handy cheat sheet. In most cases, the menus for Windows and its programs continue to display the foreign country’s language, unfortunately. But when you open the computer’s Internet browser and visit an English-language Web mail site like Yahoo (www.yahoo.com) or
68
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Google (www.gmail.com), you can touch-type your message using your familiar, native-language layout.
Keyboard Basics
Figure 2-6: The Language Bar comes in handy when typing documents that mix words from two different languages. It quickly converts your keyboard’s layout from English to other languages—Spanish, for instance, or Russian—letting you type foreign characters quickly and easily. The Language Bar also works in a pinch when you encounter a foreign layout while traveling. Click the Language Bar to see the available layouts, and then select the one you want to use when typing.
When you’re through, click the Language Bar and revert to the native country’s layout. But feel free to leave the Language Bar icon on the taskbar to help other tourists.
Installing a Keyboard No matter what keyboard you buy, the cable comes with one of two plugs: USB (page 34) or PS/2 (page 44). USB keyboards plug into a USB port while the computer’s turned on or off; Windows XP recognizes the incoming keyboard immediately. (Lefthanded accountants can even plug in two keyboards simultaneously, using the numeric keypad of the keyboard on the left for entering numbers.) In contrast, you can plug and unplug PS/2 keyboards only when the computer is off. Leaving the computer on when you plug in or unplug a PS/2 keyboard can freeze your computer in a state of confusion. If that happens to you, use the mouse to click Start and then restart your computer. When your computer wakes back up, Windows recognizes the newly installed keyboard. No matter what keyboard you plug in, Windows XP always recognizes its basic functions—the four areas described in Figure 2-1. But if your keyboard contains any fancy features like dedicated keys, embedded speakers, USB ports, or other frills, you must install the software that came with the keyboard.
Adjusting the Keyboard’s Sensitivity To type the word “Harrummmmmph,” you can tap the “m” key several times. Or, you can hold down the “m” key until it starts repeating. But how long should you hold it down before it does this? And, when the letter begins to repeat, how quickly should the letters flow? Instead of leaving you to ponder these theoreticals, Microsoft’s programmers simply chose some common settings.
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
69
Keyboard Basics
But if you want to tailor your harrummmmmph to your own specifications, click Start ➝ Control Panel ➝ Keyboard and play with the fine-tuning knobs shown in Figure 2-7, and described next. Figure 2-7: If your typed letters accidentally repeat themselves, you can use the Control Panel’s Keyboard Properties box to adjust the repeat rate to meet your needs. You can also visit this area for general troubleshooting, since the Hardware tab provides quick access to your keyboard’s drivers (the utility programs that translate between your PC and any equipment that’s attached to it).
• Repeat delay. If you’re seeing accidental repetitions as you type, slide this tab toward the Long delay rate. These settings control how long you hold down a key before it begins repeating. • Repeat rate. If a letter repeats too quickly once it starts, slide this tab toward the Slow side. • Cursor blink rate. Tossed in because it wouldn’t fit anywhere else, this sliding tab adjusts the speed that your cursor turns on and off. If that little line blinks too slowly for you to spot it in that sea of text, slide the tab to the right to speed it up a little.
Troubleshooting Keyboards When your keyboard doesn’t work, breathe a sigh of relief. It’s your computer’s most inexpensive part. You can pick up a new one for under 20 bucks at most computer stores. But since 20 bucks also buys a decent pizza, try some first aid with these quick fixes. • Make sure it’s plugged in. This seems obvious, but since keyboards tend to get pushed around the desktop, the plug may have popped far enough out of the port for the computer to forget that it exists. If it’s a USB keyboard, fix the
70
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
problem by pushing the plug further into its USB port. If it’s a PS/2 keyboard, turn off your computer, reinsert the PS/2 plug, and restart your computer.
Mouse Basics
FREQUENTLY ASKED QUESTION
My Keyboard’s Dedicated Keys Won’t Work The keys along the top of my keyboard control my computer’s sound volume and CD player, and give me oneclick access to the Internet and e-mail. Unfortunately, they recently stopped working, and I can’t find any place in Windows XP to turn them back on. What gives? Those keys worked fine when you first bought your computer because the manufacturer thoughtfully installed the special software or drivers Windows XP needs to control them. But the keys often stop working if you reinstall Windows, upgrade to a new Windows version, or have problems with the keyboard’s special software.
in Media Player lets you control CDs, for instance, and Web browsers launch from the Start menu. But if you prefer the convenience the keys offer, look for your keyboard’s part number, usually listed on a little sticker underneath the keyboard. Then visit your computer manufacturer’s Web site, and drop by the Customer Support or Download section. Enter the keyboard’s part number, and download the drivers and/or software that lets Windows XP recognize them. When you reinstall the software or drivers, Windows XP should let them work once again.
When those keys go on strike, you have two options. First, you can simply ignore them. After all, they duplicate functions already available through Windows. Windows’s built-
• Recover from spilled beverages. Clumsy elbows and soft drinks have granted early retirement to many older keyboards, but today’s keyboards are nearly waterproof. A rubber membrane covers all the internal mechanics, so the spill coats only the rubber beneath the keycaps, not the keyboard’s inner switches. If you spill a beverage onto your keyboard, quickly unplug it, and then use your mouse to shut down the computer. If you’re using a wireless keyboard, quickly remove any batteries to reduce the chances of electrical shorts. Carry the keyboard to the sink, and rinse everything off as thoroughly as possible. If your keycaps look dingy, clean them with some household cleaner and an old toothbrush. When you’re through, dry the keyboard in the sun (or even in an oven on the lowest setting). When you’re sure the keyboard is thoroughly dry, plug it back in; most of the time, it works fine. When dealing with dried soda residue, remove the keycaps by prying them off with a small screwdriver, as shown in Figure 2-8. Then wash the keyboard, dry it thoroughly, and see if it still works.
Mouse Basics Invented in 1963 as a scrappy wooden box with two wheels, computer mice now live in sleek, molded plastic cases. Every mouse style lets you push a little pointer across the screen, but manufacturers found many different ways to do it. Today’s mice are either mechanical, optical, wireless, or upside-down (trackball), as shown
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
71
Mouse Basics
in Figure 2-9. Each type of mouse has its own benefits and drawbacks, all described below. Figure 2-8: To clean a keyboard of sticky beverage residue, pry off the keycaps. Working from the bottom row, wedge a small screwdriver beneath a cap, slowly twist the screwdriver, and the cap should jump off. Don’t try to pry off the spacebar, as its special attachments are easily damaged. Remove as much stickiness as you can from the keys and keyboard to avoid future problems with trapped dust. When the keyboard’s clean and dry, push the keycaps back onto their pegs, using Figure 2-10 as a memory jog.
Figure 2-9: From left to right: Rightside up mouse, upside down mechanical mouse, upside-down optical mouse, and trackball. Whether they’re mechanical, optical, or wireless, most mice resemble the one on the far left. The big differences lie in their bellies. Mechanical mice sense the rolling motion of a ball, which needs to be removed and cleaned every month or two. Optical mice dump the ball in favor of a tiny lens that detects texture changes as it’s moved. Trackballs work like upside-down mechanical mice, but since you roll the ball with your hand, it doesn’t become dirty or require cleaning as often.
• Mechanical. If a little rolling ball protrudes from your mouse’s belly, it’s a mechanical mouse, commonly sold with older computers. Mechanical mice work best when rolled over a mouse pad (found at most computer and office supply stores), since the pad’s soft rubber gives the ball the needed grip for smooth rolling. Most people remember mechanical mice as the ones that needed cleaning every few months (page 76), and they’re quickly being replaced by optical mice, described below.
72
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• Optical. Several links up the technological chain from mechanical mice, optical mice replace ball mechanics with a tiny camera and light. The mice glow eerily as the light reflects off your desktop. The camera views the illuminated textures passing underneath, and adjusts the pointer’s onscreen position accordingly. Most people love optical mice because they banish both the pad and the monthly cleaning ritual. Optical mice work well on any textured surface (even on cloth, like a pants leg). If you have a glass or polished metal desk, you should place a traditional mouse pad or a plain sheet of white paper underneath the mouse to steady the pointer.
Mouse Basics
• Wireless or cordless. Wireless mice are often sold in tandem with a wireless keyboard, both of which send signals to a receiving unit, usually plugged into a USB port (page 34). When a wireless mouse misbehaves, reach for a new battery pack: low battery power is the prime suspect. These little rodents are almost always in motion, and, consequently, they send more information than a wireless keyboard, which means they consume batteries much more quickly. Count on replacing batteries every month or so unless you own a newer unit that “sleeps” when you’re not using it. A few wireless mice take mercy on their owners’ budgets and recharge when resting on their receiving unit. The latest wireless mice communicate through Bluetooth technology (page 452) instead of radio waves. Bluetooth gadgets don’t require receiving units—if your computer is already “Bluetooth capable,” that is. (The newest laptops come with built-in Bluetooth.) If your computer lacks Bluetooth support, pick up a Bluetooth adapter from Amazon for about $30 to $40. Plug the adapter into your PC’s USB port (page 34) to talk to any Bluetooth-capable mouse, keyboard, cell phone, printer, or other Bluetooth-embracing gadget. Note: Wireless mice don’t use the same technology that powers most wireless networks (page 406), so don’t worry about potential interference.
• Trackball. Some people prefer rolling a ball, instead of a mouse, across the desk. A trackball looks somewhat like an upside-down mouse, complete with a ball protruding from the top (see Figure 2-9, right). Rolling the ball controls the cursor, but leaves the trackball in one place, perfect for computing on a messy desk. They also reduce wrist movement and strain. • Programmable. All mice come with two basic buttons (left and right). Other mice speed up common tasks by tacking on extra, programmable buttons— click the fourth button to load your Internet browser and start searching the Web, for instance. Other multibutton creatures aim to replace game controllers (page 80), letting gamers shoot with one button, kick with another, and scurry to the next level with a third. Many mice now include a scroll wheel, a small wheel rim protruding from the mouse’s top. The mouse on the left in Figure 2-9 contains a scroll wheel between its two buttons. By resting your finger on the wheel and rolling it forward or
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
73
Mouse Basics
backward, you can quickly move up or down a document either line by line or page by page. You can adjust the scroll rate in the Control Panel’s Mouse area (page 79). LAPTOP LIFE
Trackpoints, Touchpads, and You Any desktop mouse works fine on a laptop, but that means you need to toss something else into the laptop bag. To reduce baggage overflow, most laptops come with their own built-in gadgets for moving the pointer, shown below. • Trackpoint. The Trackpoint (shown on the left, in the illustration) began life on IBM’s ThinkPad series of laptops, but quickly spread to laptops by many other manufacturers. The Trackpoint’s little red nub pokes up between the keyboard’s b, g, and h keys; push the nub with your index finger to move the mouse pointer without removing your hands from the keyboard. Should your Trackpoint’s little red cover wear out, TrackCap (www.trackcap.com) sells replacements for many different styles.
buttons that serve as the left and right mouse buttons. Two quick taps on the touchpad also mimics a double-click. Most touchpads come with third-party software for changing their sensitivity settings, usually accessible through a Touchpad icon in the Control Panel or taskbar. Even touchpad-equipped laptops don’t mind if you plug in a mouse, steering the pointer with whichever seems handiest at the time. But if you prefer handling the mouse exclusively, disable the touchpad using its Control Panel or taskbar icon. Otherwise, an inadvertent brush of your wrist on the touchpad could send your pointer scurrying in the wrong direction.
• Touchpad. Rub your finger across the top of a touchpad’s little rectangular pad (seen on the right), and the mouse pointer moves along in the same direction. Most touchpads come with two adjacent
Controlling Windows with only a Mouse Stuck with a broken keyboard? Wireless keyboard lose its battery power? Spilled a Coke on the keyboard with a project deadline in 20 minutes? A mouse lets you finish your work without ever touching a keyboard. The trick is the Windows OnScreen keyboard, shown in Figure 2-10. Figure 2-10: The Windows On-Screen keyboard is handy for controlling Windows in an emergency should your keyboard die. It places a keyboard on your screen that lets you “mouse and peck” your way through your current work.
74
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
The On-Screen keyboard won’t win any speed awards, but it works fine in a pinch. To put it onto the screen, click Start ➝ All Programs ➝ Accessories ➝ Accessibility ➝ On-Screen keyboard. The keyboard remains visible while you work, staying on top of all open windows. Click the On-Screen keyboard’s letters to type; every key works just as if you were typing it on a real keyboard.
Mouse Basics
Tip: Should your mouse die before your deadline, page 65 shows how to continue working in Windows XP using only a keyboard.
Installing a USB or PS/2 Mouse The vast majority of mice sold today hook up to your PC using a USB connection (page 34). Push the USB mouse’s plug into a USB port, and Windows XP recognizes it immediately. USB mice are hot-swappable, meaning you can unplug your roommate’s mouse and plug in your favorite mouse without turning off the computer. You can even plug in two mice and use one with each hand. (Only one mouse controls the arrow at a time.) Older mice come with the less versatile PS/2 connector (page 44), which you can’t plug in until the computer’s off. Plug the mouse into its own PS/2 port (the keyboard’s PS/2 port won’t work), and Windows XP recognizes the mouse when you turn on your computer. Note: A few USB mice come with a converter so you can plug them into PS/2 ports. That converter’s often linked to that particular brand of mouse; don’t expect it to work with all other mice, or to let your USB keyboard plug into a PS/2 port.
Windows XP always recognizes a mouse’s basic functions—moving the pointer and clicking menu items, for instance—as soon as you plug it in. In fact, Windows XP offers more than a dozen options for fine-tuning your mouse’s performance (see page 77 for details). To adjust these settings, you first need to install the drivers packaged with your mouse. (Usually you can find the drivers on the CD that comes with the mouse; if that’s gone missing, visit the manufacturer’s Web site, where you can typically download the driver from the customer support area.) BUYER’S GUIDE
A Mouse for People with Hand Tremors Most operating systems contain a wide variety of controls for adjusting a mouse’s speed and accuracy, but may not help people with hand tremors. If hand tremors keep you from controlling the mouse as efficiently as you want, consider IBM’s mouse adapter, which works much the way a video camera’s “stabilizer” smoothes out your video footage.
Plug your mouse into the adapter and plug the adapter into your computer; you don’t need to install any special software. An adjustable dial on the adapter lets you customize it to your own abilities. Montrose Secam Ltd. (www.montrosesecam.com) sells the adapter for less than $100.
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
75
Mouse Basics
Troubleshooting Mice When mice are sick, they always complain through the pointer: the arrow freezes, disappears, doesn’t move smoothly, or jumps erratically across the screen. When your mouse pointer misbehaves, try the following tips to bring it back to life. Tip: Don’t fret if your firewall (see page 490) alerts you that “pointer32.exe” is trying to connect to the Internet. That’s just a message indicating that Microsoft’s Intellipoint mouse is contacting the mother ship, checking for updated drivers. Tell the firewall to deny it access, unless your mouse isn’t working properly. Many programs, including mouse software, periodically visit their manufacturer’s Web site to fetch software or driver updates.
Plug it in all the way First, make sure the mouse cord is plugged all the way into its jack, be it USB or PS/2. Sometimes unplugging a USB mouse, waiting five seconds, and plugging it back in does the job. Don’t unplug it and plug it back in too quickly, as Windows XP needs time to notice that the mouse was removed, and then notice that it’s plugged back in again. Cleaning the mouse ball If you’re using an older-style mouse that rolls a ball across your desktop, the mouse pointer will eventually begin jumping indiscriminately around your screen. That happens because the mouse ball picks up dirt from your mouse pad and swabs the goo onto its internal parts. To fix the jumping pointer, clean the mouse. Turn your mouse upside-down and scrape off any dirt stuck to the bottom. Rotate the little round plate around the ball in the direction of its arrow until the mouse ball falls out, with an unsatisfactory mini-bounce. Wipe off any visible crud, and blow any dirt out of the hole using a compressed air canister, sold at most computer and hardware stores. Don’t clean the ball itself other than wiping off any stray hairs. Look inside the hole for the rollers; you’ll probably find dark lines of built-up crud along the center of them. Scrape this muck off with an alcohol-moistened cotton swab, as shown in Figure 2-11. When you’ve removed all the dirt from the rollers, push the ball back into the hole, and then rotate the round plate back on. The mouse pointer should stabilize. Cleaning a mouse’s optical sensor Optical mice are easier to clean since they have no moving parts. If the mouse pointer doesn’t move smoothly, try cleaning its lens—the little round spot on the bottom of the mouse near the bright light—with a cotton swab. Sometimes a stray hair interferes with its tracking ability, throwing the pointer off course.
76
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Most optical mouse problems aren’t related to cleanliness, though, but rather to the surface it’s currently tracking—they don’t like shiny surfaces. Before blaming the mouse, try reverting to an old-fashioned mouse pad.
Mouse Basics
Figure 2-11: The rolling ball inside a mechanical mouse picks up dirt and leaves it sticking to its internal rollers. When the mouse pointer doesn’t move across your screen correctly, it’s time to clean inside the mouse. Remove the mouse’s bottom plate and wipe off any goo sticking to the rollers by using a cotton swab. The dirt usually looks like a thin line sticking to the middle of the roller. Sometimes you must scrape off the most persistent dirt with a fingernail or credit card. Be sure to remove dirt from both rollers to keep the mouse pointer moving smoothly.
Adjusting a mouse Windows XP offers only three small adjustment options for huge 104-key keyboards, yet it offers nearly a dozen options for a mouse’s mere two buttons. Many optional third-party mouse drivers install even more options, doubling or tripling that number. Don’t bother exploring every option; most offer only minor cosmetic enhancements. But if your mouse doesn’t feel right—the pointer doesn’t move at the right speed, or the buttons don’t click consistently—click Start ➝ Control Panel ➝ Mouse to make any of the adjustments described below. Tip: Sometimes messing with the mouse’s options makes things even worse than before. If that happens to you, head back to the Control Panel’s Mouse setting pages and choose the Default option. That resets the mouse to its commonly used settings, letting you start from scratch.
Buttons tab Used mostly by lefthanders and slow-clickers, the Buttons tab (Figure 2-12) lets you change how your mouse’s buttons respond to your touch. • Button configuration. Lefthanders sometimes head here to reverse the actions of their mouse’s left- and right-mouse buttons, making the mouse work more efficiently in the left hand. Be careful here, though, as the button switch takes place immediately—Windows doesn’t wait for you to click the Apply button, as it does in most other windows. If you accidentally click in this box and reverse your mouse buttons, click again with the opposite button to set things straight.
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
77
Mouse Basics
• Double-click speed. If you find yourself double-clicking several times before Windows finally opens the icon or folder, adjust the difference between your single clicks and your double clicks. Change to a slower setting, and then practice double-clicking on the adjacent test folder, fine-tuning the setting until it matches your finger speed. • ClickLock. People with large monitors often drag items long distances. If your finger tires of constantly holding down the button, turn on ClickLock: hold down your mouse button on an item for a few seconds, and the cursor locks on it, letting you remove your finger and drag the item. When you get the item to the correct location, let go of the mouse button to release the lock and drop the item in place. Click Settings to adjust the amount of seconds of hold-down required before the lock kicks in. Figure 2-12: Most people don’t need to bother changing any of the many options available on the Control Panel’s Mouse window. However, the Button Configuration option comes in handy for lefthanders, letting them switch their mouse’s left and right buttons.
Pointers tab Although most people find the humble arrow works just swell as a pointer, the settings here let you replace the arrow with jazzier icons. To revert to the run-of-themill pointer when you’re tired of playing around, choose the (None) scheme. • Pointer Scheme. Windows XP comes with dozens of pointer designs—alternatives to the standard arrow/hour glass combination. Small children and herpetologists may prefer pointing with small dinosaurs or reptiles, for instance. Tip: If you have trouble locating your mouse pointer, check out some of the schemes near the bottom of the Pointer Scheme list. They darken, magnify, or invert the pointer for easier visibility.
78
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• Customize. Whip up your own pointer scheme by picking and choosing from several schemes. Stick with the standard arrow, for instance, but substitute the walking dinosaur for the hourglass, displayed when Windows is working on something in the background. Click Save As to save your new scheme under a new name for finding again later.
Mouse Basics
• Shadow. This purely cosmetic touch adds a barely visible little shadow beneath your pointer. Pointer Options tab Whereas the Pointer tab changes your pointer’s appearance, these settings offer more practical control over your pointer’s motion, making it more visible and easier to move. Ignored by the masses, these settings come in handy for people who constantly work with one hand on the mouse. • Pointer Speed. Head here if your work involves precise control of the pointer. Moving your mouse halfway across your small mouse pad usually moves the pointer all the way across your large screen. The Pointer Speed option adjusts the ratio of hand movement to screen movement. If you’re constantly pawing at your mouse pad to move an arrow across the screen, slide the control toward Fast. If the pointer zings across the screen with a mere nudge, slide the control to Slow. Tip: If your mouse pointer jumps around the screen when you move it, try slowing down the Pointer Speed. You may have it set faster than the mouse can handle.
The Enhance Pointer Precision box, normally selected, allows for more precise control, so leave it on. When it’s turned on, impatiently flicking the mouse one inch causes the pointer to fly across half the screen. Nudging the mouse slowly and carefully for one inch, by contrast, moves the pointer slowly an inch or two. • Snap to. Many times you don’t open settings to change them, but to doublecheck them. Click this box, and the pointer automatically hovers over any newly opened box’s OK button. That lets you check your settings with a quick click without having to physically move the pointer to the OK button. • Visibility. Turn on the “Display pointer trails” checkbox to turn your pointer into a long string of pointers, which helps keep the cursor in view during presentations. Turning on the “Hide pointer while typing” box keeps the pointer out of your sentences when composing. (Nudge the mouse to revive the pointer.) Finally, turning on “Show location of pointer when I press the CTRL key” places radiating rings like an earthquake map around a lost pointer—again, handy when a mouse disappears on a large display or during a presentation. Wheel tab Many mice have a scroll wheel—a little wheel protruding between the two buttons. Usually, rolling the wheel with your index finger moves the currently viewed page’s Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
79
Game Controllers
text up or down a few lines. Here, you decide exactly how many lines, from the piddling one-line-at-a-time to the supersonic 100 lines per flick. Click the “One screen at a time” option for quick page flipping. Most people stay in the neighborhood of one, two, or three lines, but “One screen at a time” comes in handy when speed-reading a large document. Hardware tab Most people click this tab—useful for diagnostics and upgrading—for quick access to their mouse’s drivers (the software that lets your mouse’s hardware communicate with Windows). Click the Troubleshooting button for a robotic walkthrough of common mouse problems and their solutions.
Game Controllers Windows XP’s built-in game controller software works very simply. When you plug your game controller into your PC’s USB port (page 34), Window greets you by name and lets all your games know what model of controller lies waiting in your twitching hands. It can even test the buttons to make sure they all work. FREQUENTLY ASKED QUESTION
The Analog vs. Digital Dilemma Game controllers come with either analog controls, digital controls, or both. What’s the difference and which one should I buy? Just like choosing between vanilla and chocolate, there’s no easy answer. It depends on your taste buds, or rather, the particular game you’re playing. The buttons on digital controllers, like anything else digital, contain only toggle switches. For instance, a four-position digital controller lets you navigate the dark underground passage in four directions only: forward, backward, left, or right. Since they simply toggle between “straight” or “turn,” they leave out the subtleties like “turn northwest.” A few extra buttons may let you jump or crouch. In fact, many games turn your keyboard into a digital controller, assigning events to different keys: tapping the Spacebar unleashes a torrent of metal-eating bacteria, for instance. Digital controllers bring speed and a high degree of accuracy to games, since computers easily interpret the simple “On” or “Off” instructions. However, some games, like flight simulators or driving games, require more finesse
80
than a simple Up or Down. That’s where an analog controller comes in handy. Analog controllers send a constant flow of measurements to your PC. Move the analog joystick or game pad delicately from Up to Down, and the PC responds to your movement’s speed as well as its direction. That lets you land the plane with just the right finesse for a graceful swoop. However, analog controls aren’t as quick or accurate as their digital counterparts. Different controllers, even of the same model, send slightly different measurements, resulting in less precision. That’s why calibration (page 81) lets your PC grow accustomed to each analog controller’s particularities and automatically adjust for them. Most game players keep at least one analog and one digital game controller in their quivers. The best game controllers contain both analog and digital controls. The Saitek P880, for instance, bears two small analog joysticks along the bottom, along with a digital game pad and digital buttons near the top.
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
But the real power lies when you install the game controller’s bundled software. That software lets you program your controller’s buttons to match the particular game you’re playing—that same left button can be a block during a football game, or a rocket launcher in a shoot-'em-up. The software saves each game’s settings as a Profile. When you switch games, switch to that game’s Profile to swap buttons quickly, something that’s beyond the intelligence of Windows XP’s built-in software.
Game Controllers
To save you from programming your own buttons, head to the manufacturer’s Web site and visit the Customer Service or Downloads section. Download and install the game controller’s latest driver, as well as custom-built Profiles for games you own or plan to buy. Tip: Computer games and their accessories represent the PC industry’s technological leading edge. Visit the controller’s Web site often to grab the latest drivers as they appear.
Although you can start playing the kid down the street immediately after plugging in your new game controller, fine-tune your game controller’s action by calibrating it. The game’s software asks you to move the controller’s pad around in all directions so it can measure the response. As the software notices any discrepancies—perhaps the controller doesn’t move to one corner as far as it does to all the others—it stores those settings and compensates for them during game play, automatically “padding” a weak corner’s movements to perform as well as the others. Note: Digital controllers, unlike analog controllers, don’t need calibrating.
Chapter 2: Keyboards and Mice PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
81
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
chapter
Chapter 3
3
Monitors and Video
Early computers didn’t use monitors; they simply printed everything on paper, limiting computer games to pretty slow rounds of tic-tac-toe. Monitors arrived a few years later, and once engineers got a taste of steering their first spaceships, video technology was quick to (and of course, continues to) improve. Today’s PCs connect to a huge variety of video gear, and this chapter guides you through how to: • Connect any monitor, TV, or digital projector to the correct port on your PC. • Connect two or more monitors to your PC to double your workspace, letting you work with more programs (or view more documents) simultaneously. • Share one display between two or more PCs to save money. • Adjust the monitor to get the best display possible. • Improve your PC’s video quality by adding a new video card. • Install a new monitor. • Troubleshoot problems when the display doesn’t look right. Laptops and PCs share monitor technology, so nearly everything in this chapter applies to laptops, as well. The “Laptop Life” boxes explain any significant differences.
83
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Monitor Basics
Monitor Basics Monitors, those screens you stare at all day, come in two basic types: the oldschool, TV-shaped Cathode Ray Tube (CRT) monitors from yesteryear, and the newer, flat, and thin Liquid Crystal Display (LCD) monitors filling the store shelves today. When dealing with either breed of monitor, the same confusing terms pop up on sales floors and Windows menus. These terms top the list: • Screen size. Borrowing some trickery from TV-land, the computer industry measures monitors diagonally to create the illusion of executive-sized desktops. However, a 17-inch monitor gives you only a 13.6-inch-wide Windows desktop. Even an expensive 21-inch monitor offers only about 16 inches of workspace. • Pixels. Like the Sunday funnies, a monitor displays pictures by using tiny colored dots. The industry refers to the dots as pixels. A monitor displays text by simply stacking dots in different configurations, shown in Figure 3-1. • Resolution. Resolution refers to the number of pixels your monitor can use when filling up the screen. For instance, a low resolution setting like 640 × 480 turns the screen into a grid of 640 lines of 480 pixels. A higher resolution of 1024 × 768 creates a grid of 1024 rows of 768 pixels. A higher resolution produces a larger grid, which means a larger desktop—something everybody appreciates when trying to place two large windows next to each other. • Refresh rate. CRT monitors work much like movie projectors, constantly flashing new frames onto the screen. Even when you’re viewing a static image—a Web page, for instance—your monitor constantly refreshes the screen. If the monitor’s not speedy enough, the screen flickers noticeably, like you’re watching an old movie. Measured in hertz, the refresh rate refers to the speed with which the monitor updates the screen. CRT monitors work best at the highest refresh rate they offer, usually from 75–100 Hz. LCD monitors display images differently than CRT monitors, so they don’t have flicker problems. Keep their refresh rate set at 60 Hz. (See page 107 for instructions on how to adjust the refresh rate.) • Contrast ratio. Found on a monitor’s list of technical specifications, contrast ratio measures the ratio of the brightest color to the darkest color that a monitor can display. Higher numbers are best, as they let a monitor display very dark blacks along with very bright whites and colors. CRT monitors average a 700:1 contrast ratio; most LCD monitors now match or exceed that. • Response time. This rating, measured in milliseconds (ms), refers to the time required for an LCD monitor’s pixels to turn from black to white, and then return to black. Lower numbers mean faster response times. A lower response time lets a character dash across the screen without leaving a trail of ghostly images following it.
84
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• Viewing angle. Another term applied only to LCD monitors. The viewing angle measures how wide an arc viewers can be positioned within and still see everything that’s on a display. A wide viewing angle lets lots of people see the monitor, even if they’re standing off to the side. A narrow viewing angle restricts the view to yourself, and perhaps the guy peering over your shoulder.
Monitor Basics
Figure 3-1: Everything displayed on your screen consists of pixels—little dots like the ones shown here. Your computer turns pixels on or off in different colors to display text or images. To give your monitor more (or fewer) dots to play with, adjust its resolution. A resolution of 640 × 480, for instance, gives your monitor a grid that’s 640 pixels wide and 480 pixels high. Switching your monitor to a higher resolution, like 1280 × 1024, gives it a larger grid, meaning you can pack even more information into the screen. The tradeoff? The monitor shrinks everything to fit the screen.
LCD (Liquid Crystal Display) Today, nearly everybody buys an LCD monitor (also called a digital monitor); these are the sleek, flat-screen models like the one shown in Figure 3-2. As is the case with most technological innovations, problems plagued early LCD monitors. The screens faded when viewed from the sides, for instance—great for privacy when working on an airplane’s seat tray, but not so good for presentations. Also, early LCD screens didn’t update their displays quickly enough to satisfy hardcore gamers: fast-moving characters left unwanted “ghosts.” Manufacturers earned their chops building LCD monitors for laptops, so they fine-tuned desktop LCD displays fairly quickly. Today, LCD monitors surpass CRT monitors in nearly every way: they provide clearer screens, consume less desk space, require much less energy, give off less heat, are easier on the eyes, and, well, they just plain look nicer. Just like their predecessors, most LCD monitors connect to a PC’s VGA port (Figure 1-13, top). The best LCD monitors come with a DVI (Digital Visual
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
85
Monitor Basics
Interface) port (Figure 1-13, bottom)—a newer port specifically designed to let these new digital monitors display their clearest images. Figure 3-2: Top: With their sleek look, small footprint, and vivid displays, LCD monitors like this one have pretty much pushed CRT monitors out of the marketplace. Bottom: Like many new LCD monitors, this one comes with two ports, letting it connect to a wider range of PCs. The monitor’s DVI port (left) lets the monitor plug into the digital cards found on newer PCs and video cards. Next to it, an old-style VGA port (right) lets the monitor plug into the VGA ports found on nearly every PC, especially older ones.
DVI port
VGA port
To make things simple, some LCD monitors come with both a VGA and a DVI port, shown in Figure 3-2, bottom, so you can plug them into PCs bearing either one of those openings. Tip. When shopping for an LCD monitor with a DVI port, give bonus points to ones that come with their own digital cable. Those cables aren’t cheap; they cost anywhere from $15 to $50, depending on their quality and manufacturer.
Today, the biggest problem with LCD monitors comes from dead pixels—pixels that don’t light up correctly. Some dead pixels constantly display an annoying pinpoint of one color; others stay black. Dead pixels aren’t very noticeable when you view digital photos; after all, one dead pixel blends in easily among 786,432 working ones. But when viewed on a background of one color—a completely blue or white desktop, for instance—dead pixels stand out like a pinhole in the window blinds shading an afternoon sleeper. 86
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Manufacturers don’t want to scrap an entire monitor because of one or two dead pixels, so they ship the monitors to stores anyway. Some people never notice the dead pixels or don’t rank them high on their worry list. Others find the dead pixels bothersome, and want their monitors replaced.
Monitor Basics
Since dead pixels don’t irritate everybody, manufacturers rarely publicize their replacement policies. Some limit replacements to monitors with a certain number of dead pixels—three or more, for instance. Others hinge their replacement on the dead pixel’s location—dead pixels near the corners or edges don’t garner as much sympathy as those living near the center. Others replace monitors only for customers who protest loudly and make several phone calls. Before buying a monitor, ask the salesperson or vendor about the store’s replacement policy. FREQUENTLY ASKED QUESTION
The Analog-to-Digital Dilemma The back of my flat-panel digital monitor has two ports— VGA and digital. Since it’s a digital monitor, why does it need a VGA port, which is analog? Should I use the VGA or digital port? Since you already bought the monitor, use the port that fits the one on your video card. Your monitor works with either of them. But to understand which port truly works the best, you need to understand the difference between analog and digital. When computers want to display something onscreen, they communicate with the monitor using their native, numerical language—digital ones and zeroes. CRT monitors, however, don’t work with numbers. Their technology depends on subtle changes in electric current—i.e., analog information. To bridge that analog/digital communication barrier, a PC’s VGA circuitry converts the digital information into analog information before sending it the monitor. That solution works great for CRT monitors. But the arrival of digital monitors meant computers could finally start sending their
numbers directly to the monitor. VGA cards and ports were suddenly obsolete—almost. Digital monitors were too expensive when first introduced, and they required expensive new digital video cards. Few people could afford both the monitor and the card, so manufacturers built VGA ports into many digital monitors, letting them work with the millions of VGA cards already living on computers worldwide. Then, they placed an Analog-toDigital Converter (ADC) inside the digital monitor. That’s right: your PC creates digital information, which the VGA card converts to analog before sending to the monitor. Then the digital monitor converts the analog information back to digital for displaying onscreen. And that’s why digital monitors don’t look their best when plugged into a VGA port: Some of the quality disappears during the two translations. Many people don’t notice the difference, since the converters work very well these days. But to use your digital monitor to its fullest capacity, plug it into a video card with a digital port.
CRT (Cathode Ray Tube) Monitors CRT monitors are bulky and heavy, and they resemble TV sets (Figure 3-3), but they do bear one redeeming quality: they’re relatively cheap, usually costing less than $150—if you can still find any for sale. Gamers and graphic artists held on firmly to CRT monitors, as they preferred CRT monitors’ fast screens and vivid colors. But when LCD monitors finally caught up, Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
87
Installing a Monitor
those two camps packed up and moved along the technological trail toward LCD displays. Figure 3-3: A computing mainstay for many years, CRT monitors no longer fill the shelves of computer stores. These bulky and heavy monitors lost popularity when higher-quality LCD monitors came down in price.
As CRT monitors slide toward the computer graveyard, they aren’t finding a welcome funeral. The monitors contain toxins like cadmium, mercury, and large amounts of lead—enough to define them as hazardous waste in California, Florida, Maine, Massachusetts, and Minnesota, with other states passing similar restrictions to keep them out of their landfills. On the plus side, CRT monitors have been around so long that nearly every PC recognizes them on contact. Plug nearly any CRT monitor into your PC’s VGA port (page 34), and Windows jumps onto the screen.
Installing a Monitor CRT monitors just plug into a plain old VGA port (page 34): a 15-hole, D-shaped, round port found on nearly every computer. Digital LCD monitors can often plug into either of two ports, depending on their connectors. Some plug straight into a VGA port, just like CRT monitors. The more expensive ones just plug into a DVI port (page 34), found only on a digital video card. If your LCD monitor comes with only a DVI port—and your PC doesn’t come with a DVI port to connect the monitor’s cable—you need to buy and install a video card (page 107) with a DVI port.
88
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Once you plug a video cable into its port, twist the two knobs next to the connector to hold it in place.
Plugging Two Monitors into One PC
TROUBLESHOOTING MOMENT
Getting Rid of Old Monitors When you finally replace your old CRT monitor with a sleek new LCD panel, don’t just drop the old one in a dumpster; that can get you arrested in some states. If you can’t give your old monitor to a neighbor or keep it around to outfit your PC with dual monitors (described in the next section), here are your options.
electronic gear. Check with your city’s landfill department to see how they’re handling the problem and whether they charge for the service. • Recyclers. A few companies now tread the computer recycling waters. If you’re lucky, you’ll find a recycler in the Yellow Pages who will take the monitor off your hands for a nominal fee.
• Donations. Many large national charities no longer accept CRT monitors (or TV sets, for that matter). But if your monitor or PC still works, some schools, small nonprofits, local computer clubs, or local training programs might accept it.
To find recycling options in your area, contact Earth 911 (www.earth911.org), a fantastic resource for a nation brimming with dead cell phones, monitors, and other technological castoffs. The site offers a huge database of recycling information, sponsored in part by Home Depot, HewlettPackard, and ESRI software.
• Drop-offs. Some cities offer hazardous waste disposal, letting you drop off your obsolete or frazzled
Plugging Two Monitors into One PC Windows XP graciously lets you plug up to 10 monitors into your PC, a feature used mostly by hobbyists adding cockpit windows to their garage-sized flight simulators. Most people who take advantage of this feature stick with just two monitors, placing them side by side to double their desktop’s size. Devote one monitor to your work, for instance, while the other displays notes, email, or a handy Web page. A second monitor also works well for files that don’t fit well on one screen— extra-wide spreadsheets, for instance, or that panorama you created with your new digital camera. Windows XP seamlessly merges the two desktops with a feature called Dualview, letting you drag tidbits from one monitor to the other. And Windows doesn’t care whether you plug in CRT or LCD monitors or a combination of the two; Windows remembers each monitor’s mechanics and sends it the signals it expects.
See if Your PC Supports Two Monitors Before embracing the two-monitor lifestyle, make sure your PC or laptop supports two monitors by choosing Start ➝ Control Panel ➝ Display ➝ Settings tab. If you spot two monitors in the window, as shown in Figure 3-4, you’re halfway there: Windows XP can expand your desktop onto a second monitor.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
89
Plugging Two Monitors into One PC
Spot only one monitor in the window? Then your computer can’t handle a second monitor until you install a second video card—something not possible with a laptop, but fairly easy to do on a desktop PC (see page 107 for details). Figure 3-4: To see if your PC or laptop supports more than one monitor, choose Start ➝ Control Panel ➝ Display ➝ Settings tab. If you spot two numbered monitors, like the ones in this figure, your PC supports a second monitor, letting you double your desktop’s size (or watch movies at work, on slow days).
Laptop owners, peek under your laptop’s backside plastic flaps to see if you can find a video port.
Plug in the Second Monitor Once you know Windows XP supports two monitors, look for a place to plug in that second monitor. Examine your monitor to see if it bears a VGA or DVI port (Figure 3-2, bottom). Some monitors help out by including one of each. Next, examine the sea of ports on the back of your PC for a VGA or DVI port that matches the port on your monitor. After reviewing your monitor’s connector and the back of your PC, you’ll be facing one of two scenarios: • If a video port on your PC matches a port on your second monitor, connect the appropriate cable between them, be it VGA or DVI. Need a cable? Drop by any electronics, office supply, or computer store for either type of cable. • If your second monitor’s ports don’t match the ports on your PC, you’ve reached a minor impasse. DVI doesn’t work with a VGA port, nor vice versa. (Converter boxes exist, but cost several hundred dollars.) To install your second monitor, you must buy and install another video card (page 107) into your PC that matches your monitor’s connector. One minor salvation: this new video card needn’t be an expensive, high-performer; any run-of-the-mill card for under $75 will do the trick. Note: You may spot one video port on your PC’s video card, and a second—a VGA port—hiding up near your USB ports. That VGA port, built into your motherboard, is probably turned off because your current monitor plugs into your video card. To turn it back on, head for your BIOS (page 525) and change your PC’s Onboard Video setting, a fairly simple matter of selecting On from the Onboard Video menu. 90
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Activate the Second Monitor Once you plug the second monitor into your PC, tell Windows about your new monitor by following these steps:
Plugging Two Monitors into One PC
1. Right-click anywhere on your Desktop and, from the shortcut menu, choose Properties. Or, choose Start ➝ Control Panel ➝ Display. 2. Click the Settings tab, and then click the monitor with the “2” on the screen. The Settings tab (Figure 3-4) displays both monitors on the screen, whether or not the second one’s currently connected. 3. Choose “Extend my Windows desktop onto this monitor” and then click Apply. Windows activates the second monitor: The screens on both monitors flash a bit, and when they awaken, Windows appears on the second monitor. The second monitor wears the same background or “wallpaper” as your first monitor. Since Windows treats them as two pieces of one large desktop, you can’t assign each one different wallpapers or screensavers.
Identify, Position, and Assign the Monitors To test your second monitor, click the Identify button on the Settings tab and watch the numbers “1” and “2” appear on the two monitors, as shown in Figure 3-5. Windows places the number “1” on the primary monitor. The primary monitor, the one used to turn on the Dualview wonderland, earns special honors. That monitor turns on first when you turn on your PC and log in; newly launched programs appear there, as well. (A laptop’s monitor is always the primary monitor.) When you turn on Dualview, Windows assumes your second monitor sits to the right of your primary monitor, the same way the two monitors appear in Figure 3-5. That’s important to know because dragging items off your primary monitor’s right edge makes the pointer vanish, and then reappear on the second monitor’s screen. Tip: The mouse pointer tends to vanish on the wide pastures offered by two monitors. To increase its visibility, head to the Control Panel’s Mouse icon, click the Pointer Options page, and turn on any or all of the options on the Visibility area (page 79).
If your cat’s sleeping to the right of your primary monitor, feel free to put your second monitor on the left. But tell Windows about it: drag the second onscreen
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
91
Plugging Two Monitors into One PC
monitor to the left of the primary monitor. Windows then lets your mouse pointer move off the left edge, instead, letting your sleeping cat lie. Figure 3-5: The Dualview setting lets you connect two monitors to one PC, stretching your desktop across them both. To see which one is which, click the Identify button (on the Display Properties’ Settings tab). Windows XP places a “1” on the primary monitor—the one you log onto when Windows starts—and a “2” on the monitor you added. Windows XP initially places the second monitor on your right side—that means your mouse pointer disappears off your primary monitor’s right edge before appearing on your second monitor. To change the pointer’s “disappearing edge,” return to the Dualview setting window and drag the onscreen monitors into different positions.
Dualview’s monitor positioning proves quite versatile. For instance, if you want to “stack” your monitors for viewing extra long Web sites, drag and drop the onscreen monitor to the top or bottom of the primary monitor. If you ever forget which monitor corresponds to Windows onscreen monitors, just click the Identify button (on the Display Properties’ Settings tab [page 91]), and Windows numbers them for you. If you find yourself working on your second monitor more than your primary monitor, tell Windows to assign primary status to the second monitor: click the number 2 monitor onscreen and choose “Use this device as the primary monitor” from the Settings page.
92
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Note: Video cards with two video ports sometimes contain built-in software that conflicts with Windows XP’s Dualview feature. If Dualview doesn’t work properly, look for your card’s icon in the Control Panel (Start ➝ Control Panel). Most dual-port cards come from nVidia, ATI, or Matrox. If you spot an icon with one of those names in the Control Panel, open it and try turning its own dual-desktop feature on or off to see if Windows XP’s Dualview kicks in.
Plugging Two PCs into One Monitor
POWER USERS’ CLINIC
Now Presenting… Costing anywhere from $500 to $2,000, digital projectors project a computer’s screen onto a wall or movie screen for audience viewing. When combined with a spiffy slideshow creation program like Microsoft PowerPoint, a digital projector makes you the commander of the conference room— if you can remember your notes and pace your patter to keep the show rolling.
Digital projectors plug into a video port (or connect like a TV, page 95), so Windows treats them like any other second monitor. Tell Dualview to make your digital projector the second monitor, and then tell PowerPoint about your plans: open PowerPoint and select SlideShow ➝ Set Up Show ➝ Multiple Monitors ➝ Display slide show on Monitor 2 ➝ Show Presenter View ➝ OK.
To up your odds for success, turn on Dualview. This feature lets you view your notes (and PowerPoint’s built-in timer) on your laptop’s screen, while the audience views your presentation on a screen.
That lets the audience watch your slideshow on the digital projector, but lets you read your notes on your laptop. Feel free to page through your notes, preview upcoming slides, and view PowerPoint’s all-important “elapsed time counter” to end your show on time.
Plugging Two PCs into One Monitor Sometimes you end up with more PCs than monitors. For instance, some households keep their old PC’s monitor when buying a new PC, effectively decapitating the old PC. In other cases, folks share their desktop PC’s monitor with their laptop. And some families share a monitor with the kids—if they can get away with it. Whenever you share a monitor between two PCs, a KVM (Keyboard Video Mouse) switch (Figure 3-6) spares you the hassle of crawling behind the desk to switch the cables from one PC to the other. You plug your monitor, mouse, and keyboard into the switch, which usually costs between $20 and $50. Then, on the other end of the switch, you get two sets of cables: one for each PC’s monitor, keyboard, and mouse ports. To work on the PC you currently see on your monitor, start working as normal, typing and moving your mouse.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
93
Using TV Sets as Monitors
When the kids want to play with the other PC, press a button on the switch or type a certain key sequence—the Scroll Lock key twice, for instance. That places the second PC’s screen on the monitor, letting the kids do their homework. Figure 3-6: This Linksys KVM switch, available for under $40, lets two PCs share a single monitor (and a mouse and a keyboard, for that matter). Plug your monitor, mouse, and keyboard into the switch. Then, plug the switch’s cables into the monitor, mouse, and keyboard ports of the two PCs. To switch between PCs, push a button on the switch or type a special key sequence on your keyboard.
Some businesses juggle dozens of PCs with one KVM switch, letting one operator handle any problems that crop up with computers that are otherwise unattended. Admittedly, a KVM switch comes with a few drawbacks. Unless you connect the two PCs to a network (page 403), you can’t copy information between them. And some wireless keyboards and mice don’t work well when plugged into KVM switches. But like all niche products, a KVM switch provides a handy solution under the right conditions. Sharing a monitor can be more practical than it first sounds. In some setups, for instance, a PC serves only as a backup system (page 463), or it sends music and photos to a TiVo or other entertainment center. Since these PCs usually run unattended, a $30 KVM switch makes more sense than a second $250 monitor.
Using TV Sets as Monitors Early computer adopters lamented having to buy a second “TV” when they bought their first computer. Why couldn’t they just hook the darn thing up to the TV? For the answer, sit close to your TV screen while a movie’s credits roll by; you’ll quickly realize that televisions lack the crisp detail needed for close-up editing. Televisions work best when displaying pictures, not text, so they usually make lousy PC monitors. However, hooking your PC to a TV works well for several things: showing off digital photos to a group, viewing movies through the PC’s built-in DVD player, or playing some video games.
94
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Unfortunately, TVs and PCs sprouted from two different evolutionary seeds. The branches began to intertwine a few years ago, so your PC and TV may share the same ports. In that case, connecting a PC to a TV is as easy as connecting a VCR. When they don’t share ports, however, be prepared to weave a long thread of cables and connectors.
Using TV Sets as Monitors
LAPTOP LIFE
Dimming the Lights to Conserve Power Even after more than a decade of development, few laptops pack enough battery power to play a DVD through an entire cross-country flight. The primary culprit? Your laptop’s monitor, which is its biggest power hog. Squeezing extra life from a battery usually requires dimming the monitor to 50-percent brightness—or even dimmer. (Dimming to 40-percent brightness may make the battery last through a night flight.)
• Some laptops offer power scheme adjustments that let you choose different brightness levels for different tasks. To see them, choose Start ➝ Control Panel ➝ Power Options. You can create custom power schemes that, say, tell the screen to brighten when you’re word processing, but lower or turn off when you’re listening to MP3 files or when the battery life drops below a certain level. When you finish creating a power scheme, save it for later access.
You can adjust a laptop’s screen brightness level in several ways, depending on the model and manufacturer:
• Windows XP also comes with some built-in power schemes, available by clicking Start ➝ Control Panel ➝ Display ➝ Screen Saver ➝ Power. These power schemes won’t actually dim the monitor, but they’ll turn it off when you haven’t touched a key for while.
• Some laptop manufacturers add a dedicated key (page 60) for on-the-fly adjustments. Hold down the Fn key and press the Brightness key, for instance; it’s usually an icon of a shining sun on one of the Function keys. When an adjustment bar pops up, press the arrow keys to lower or brighten the screen.
The next two sections explain how to route both your PC’s video and sound so you can see and hear everything on your TV. Note: There’s one area where the TV-PC connection is growing stronger by the day: many TV stations already broadcast their signal over the Internet, which means you don’t have to bother hooking up your PC to your TV. You can watch the tube right on your PC’s monitor. Broadband (page 321) Internet subscribers can tune into TV stations broadcast from Albania to Zimbabwe simply by clicking a link.
Display Your PC’s Video Signal on Your TV A few PCs and laptops—often the newer, more expensive models—come fully equipped to send video to your TV. Connecting the two machines mostly involves using a single cable—the same one that connects a VCR or a DVD player to a TV (this makes sense since you’re essentially using your PC as an input device, to route a signal from your PC to your TV). Older PCs and laptops require add-on equipment, extra cables, and more than a little patience. Follow the steps described next to test the friendliness level between your PC and television.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
95
Using TV Sets as Monitors
Note: The terms “port” and “jack” are synonymous when it comes to the openings on the back of your PC and TV where you plug in cables.
1. Look for a Video Out port on your PC or laptop. PCs and laptops often include an S-Video port (Figure 3-7, top left). Standing for “Separated Video,” S-Video cables often connect high-quality TVs with game consoles, camcorders, and DVD players. If your PC or laptop has an SVideo jack, it often lives next to where the monitor plugs in. PCs occasionally send video through an RCA port (Figure 3-7, top right). Named after the venerable Radio Corporation of America, RCA ports live on the back of nearly every TV; they’re often used for plugging in a VCR. Figure 3-7: Top: Look for either an S-Video (left) or an RCA (right) port on the back of your PC. Then examine the back of your TV for a matching connector labeled Video In. If you find matching ports, run the appropriate cable between the two ports to connect your PC or laptop to the TV. Bottom: This TV has three RCA ports (also known as jacks). One RCA port, labeled Video In, accepts video. (The other two accept stereo sound—one left channel and one right channel.) To connect this particular TV to your PC, connect an RCA cable between the TV’s Video In port and your PC’s Video Out RCA port.
Antenna jack
Video in jack
Audio in (left) jack Audio in (right) jack
96
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
2. Look for a Video In port on your TV. Most TVs come with at least one of three possible Video In ports. They’re easy to spot, because most TV manufacturers do you the favor of labeling their ports.
Using TV Sets as Monitors
— RCA port. This connects many TVs to a VCR or DVD player. Figure 3-7, bottom, shows a TV set’s Video In RCA port. (TVs use RCA ports for sound, as well as video; the yellow RCA port carries the video.) — Antenna or RF port. Almost every TV sports an Antenna port (Figure 3-7, bottom). The cable from your cable or satellite TV provider almost always plugs in here. — S-Video port. More expensive TVs offer S-Video ports as well as RCA ports. S-Video delivers a higher quality signal. Here’s how to handle the ports you find on your PC and your TV: • If your PC and TV have ports that match, you’re in great shape. Connect the two with a cable that matches them, be it S-Video or RCA. Steal the cable from your VCR, if it matches, or buy a new cable at Radio Shack or an electronics store. • If your PC has S-Video and your TV has RCA—or vice versa—buy an S-Video/ RCA converter, available for less than $20 from Radio Shack and other electronics stores. Plug the converter into the S-Video port, thus converting it to an RCA port. The ports then match, letting you connect an RCA cable between them. • If your PC doesn’t have a Video Out port, or your TV has only an Antenna port, buy a PC-To-TV converter. Available for less than $50, the little box plugs into your PC’s USB port (page 34) and provides S-Video, RCA, and Antenna ports for connecting to any port your TV offers. Note: An Antenna port, shown in Figure 3-7, bottom, is often called an “RF” or “Coax” port.
To help you comb through the combination of cables, connectors, and converters you may encounter, Table 3-1 provides a quick reference guide. Identify the ports on your PC and TV and then look them up in the table to find your connection solution. Table 3-1. Connection ports between your PC and your TV
Your PC’s Video Out Port
Your TV’s Video In Port
Connect Them This Way
S-Video
S-Video
Connect the two with a single S-Video cable.
RCA
RCA
Connect the two with a single RCA cable.
S-Video or RCA
Antenna (also called RF or cable)
Buy a PC-to-TV converter, plug it into your PC, and connect an RF cable between the converter’s Antenna port and your TV’s Antenna port.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
97
Using TV Sets as Monitors
Table 3-1. Connection ports between your PC and your TV (continued)
Your PC’s Video Out Port
Your TV’s Video In Port
Connect Them This Way
S-Video
RCA
Buy an S-Video-to-RCA converter. Plug the converter into your PC’s S-Video port to turn it into an RCA port. Then connect an RCA cable between your PC and TV.
RCA
S-Video
Buy an RCA-to-S-Video converter. Plug the converter into your TV’s S-Video port to turn it into an RCA port. Then connect an RCA cable between your TV and PC.
None
Any
Buy a PC-to-TV converter and connect it to your PC. Then connect the appropriate video cable to any of your TV’s Video In ports. Plug the cable’s other end into the matching port on the converter.
All the rules in this section apply to a High-Definition TV’s ports, too. However, some HDTV sets simplify the job by including standard PC monitor ports: VGA and/or DVI. If you spot one of those, unplug your PC’s video cable from its monitor, and plug the cable into your HDTV set instead. Add a DVI port to your PC, if needed, by installing an updated video card (page 107). RamElectronics (www.ramelectronics.net) sells many converters to use between PC ports and HDTV ports. The store’s a gold mine for high-quality—but cable-andport-challenged—home stereo gear.
Play Your PC’s Audio Through Your TV’s Speakers Once you connect the video, the hard part is over. Long ago, PCs and TVs agreed on the same cable for connecting sound. Follow these steps to send your PC’s sound to your TV: 1. Find your PC’s Line Out or Speaker port. This 1/8-inch round port lives on your sound card (page 45). It looks just like the headphone jack on an iPod or other music player. Of course, the sound card’s other four or five ports look identical, so be sure to choose the one for Line Out or Speaker. (The icon shows a little outward-pointing arrow, as shown on page 45.) 2. Find your TV’s Audio In ports. Shown in Figure 3-7, almost all TVs offer one or two RCA ports for incoming sound. If you’re lucky enough to have a stereo TV, you see two RCA ports, shown in Figure 3-7: the red port carries the stereo sound’s right channel. (Remember red for right to always hook up your stereo correctly.) The other port carries the left channel. Mono TVs come with one port only, usually the red one.
98
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Be sure to choose the pair of ports labeled “Audio In”—not “Audio Out.”
Watching TV on a PC
3. Connect the cable between your sound card’s Line Out or Speaker port to your TV’s Audio In RCA ports. If you’ve ever plugged your iPod or music player into your stereo or boombox, you already own this cable (Figure 3-8). The cable has a stereo 1/8-inch plug on one end and two RCA ports on the other. Can’t salvage a spare cable? Pick one up for a few bucks at any drug store, Radio Shack, or stereo store. Push the small stereo plug into the Line Out or Speaker port on your PC’s sound card (page 45) and plug the two RCA plugs into your TV’s Audio In ports. If you have a mono TV, just plug the red (right) side of the cable into the TV’s Audio in port; leave the cable’s other sound connector dangling and unattached. Figure 3-8: Push the tiny, 1/8-inch plug into your PC’s Line Out or Speaker jack, and plug the two RCA plugs into your TV’s Audio In ports. (The red plug goes into the right port; the other plug goes into the left port.)
Once you connect the cable between the PC and TV, your PC’s screen immediately appears on the TV, and any noise or music plays through the TV’s speakers. You may need to adjust the TV’s picture so the PC screen lines up along the sides. Adjusting a TV works just like adjusting a CRT monitor (page 103), since those monitors borrow TV technology—find the TV’s picture alignment knobs and turn them until the PC’s screen centers itself on the TV.
Watching TV on a PC TV sets make lousy PC monitors, but PCs and their displays make great TV sets. In fact, some PCs already include a TV tuner that lets them double as high-quality TV
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
99
Troubleshooting Your Monitor
sets. If you’re not lucky enough to own one of those fancy models, though, upgrading your PC to display television rarely merits the cost, for several reasons. First, most PCs have small, 15- or 17-inch monitors that are usually parked in front of a single chair—a far cry from the living room’s big TV, comfy couch, and nearby popcorn maker. Second, adding TV to a PC costs between $50 and $150—that’s more cash than it takes to pick up some new TVs. Finally, TV-equipped PCs can record shows to your hard drive, but they lack the finesse of dedicated TV recorders like TiVo or Replay TV ($100 to $250), which automatically record shows according to your tastes. So, why bother? Some upgraders don’t own TVs or don’t want to buy a second one for their offices. Others want to record shows, but despise paying the monthly dues required by TiVo or ReplayTV. Some newshounds want CNN sitting in a corner of their desktop. And some folks simply like to tinker with their PCs. Your PC needs two things to morph into a TV: • The TV signal. TV shows already stream into your house from the cable company, satellite dish, or a roof antenna; they then enter your house through a cable. Unplug that cable from the back of your TV (if you use an antenna) or from your cable or satellite box. Plug that cable into a signal splitter—a twodollar gadget (shown in Figure 3-9) that splits one cable into two ports. Plug two additional cables into the splitter’s two ports; one of those cables plugs back into your TV (if you use an antenna) or cable box, and the other plugs into your PC’s new TV tuner, described next. • The TV tuner. TV tuners, which cost between $50 and $150, come mainly as drop-in cards (page 25), although a few come as plug-in USB (page 34) boxes. Add one to your PC, plug the cable carrying your TV shows into the tuner card’s port, and install the tuner’s bundled software. Both Hauppauge (www.hauppauge.com) and ATI (www.ati.com) sell TV tuners for PCs. For more information about adding TV tuners or recording shows to your PC, check out The Build Your Own PVR Web site (www.byopvr.com). To switch between channels 2 through 99, load the software bundled with your PC TV tuner. The software places a little keypad on your screen for switching between channels with the mouse or keyboard’s numeric keypad. Note: To tune in channels above 99—including pay channels—connect the splitter after the cable leaves your cable/satellite box. That lets the cable box unscramble the signals before routing them to your PC, which then displays the signal on channel 3 or 4. Unfortunately, this also means you need to use the cable box’s remote to change channels.
Troubleshooting Your Monitor When figuring out what’s wrong with a monitor, the biggest problem boils down to fingering the troublemaker: your monitor or video card (page 104). Since the video card feeds your monitor everything it displays, it’s the prime suspect in most 100
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
problems. Still, try the following troubleshooting steps on the rare chance your monitor’s on the fritz. If none of these fix your problem, then the fault lies with the video card; head for its Troubleshooting section (page 110) instead. Connect a cable from here back to your TV or cable box
Connect a cable from here to your PC’s TV tuner
Troubleshooting Your Monitor
Figure 3-9: Disconnect the TV cable where it enters your cable box or TV, and then connect it to the single end of this RF splitter, a handy gadget sold at most electronics stores for a few dollars. The splitter breaks the signal into two identical signals. Plug a second cable into one of the two new ports and connect it back to your TV or cable box. Then connect another cable between the splitter’s remaining port and your PC’s tuner.
Disconnect the cable from where it enters your TV or cable box, and plug it into here
UP TO SPEED
Cleaning the Monitor Monitors look their dirtiest when turned off. Then you can really see the dust, sneeze marks, and swatted gnats. To clean an LCD monitor, reach for the standard “lint-free cloth,” meaning anything sold for cleaning camera lenses or eye-glasses. (Most optometrists give them away during your checkup, if you remember to ask.) Lacking that, stick with a 100-cotton cloth. A little warm water on the cloth removes just about everything. Don’t wipe the screen with
anything made of paper, including a tissue, as the fibers leave scratches that build up over time. The front of a CRT monitor contains glass, not plastic, so it’s much less picky about its cleaning cloth. As with an LCD display, start cleaning with a little warm water. Spray a little glass cleaner on the cloth, if necessary, to get rid of the real stubborn stuff.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
101
Troubleshooting Your Monitor
No Picture on the Monitor When your monitor presents you with an empty black screen, look at its power switch. Most monitors light up their On button—or an adjacent light—to let you know that they’re plugged in, saving you from crawling beneath the desk. If you don’t spot a light, check the power cord at the wall, as well as where it plugs into the back of your monitor. Once everything’s plugged in, check for the following problems: • Check the cable for bent pins. If the monitor’s plugged in with a lit power button, unplug the cable from your PC’s port and the monitor. Then carefully inspect the cable’s connectors. If any pins look bent, like the one in Figure 3-10, carefully straighten it with needle-nose pliers, and then plug it back in. You may get lucky. If you’re not lucky and are left holding a broken pin, replace the video cable to solve the problem. Figure 3-10: Sometimes a bent pin in a monitor’s cable connector keeps it from working properly. If you spot a bent pin, like this one on the plug’s bottom right, use a pair of needle-nose pliers to straighten it back in line with the rest of its neighbors.
Bent pin
• Look for a menu. When a monitor doesn’t receive any signal from the PC, it splashes a message or menu on the screen. If you spot that message or menu, the monitor’s working fine. The culprit then lies with your video card (page 107), the video cable, or some of the video card’s settings (page 105). No menu? Keep suspecting the monitor. • Plug in a spare video cable. You’re lucky if this fix works; you may simply need to replace a bad cable. Pick one up for less than $20 at most stores selling computers or office supplies. • Plug in a spare monitor. Plugging in a spare monitor, either borrowed from another computer or a neighbor, provides a foolproof diagnosis. If the spare monitor works but your monitor doesn’t, it’s time to start shopping for a replacement monitor. 102
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Adjust a CRT monitor CRT monitors require much more adjusting than LCD monitors to keep their pictures looking pretty. Every time you change the monitor’s resolution (page 106), for instance, the sides of the screen creep away from the monitor’s margins.
Troubleshooting Your Monitor
CRT monitors rely on knobs for calibration, unlike the push-button controls of LCD monitors. The knobs usually hide inside a flip-down panel along the monitor’s front bottom edge. Before reaching for the knobs, though, be sure your monitor’s been turned on for at least 30 minutes so it’s warmed up. Little icons next to the knobs explain their purposes. The icons usually show a picture of the monitor and arrows showing how turning the knob affects the screen, either by condensing, widening, or shifting it to the left or right. Several free programs simplify adjusting a CRT monitor. Nokia’s freebie Nokia Test (www.freepctech.com/rode/004.shtml) places different patterns on the screen, each designed for a specific function. One pattern fills the entire screen with squares; turn your CRT monitor’s vertical and horizontal controls until the squares stop falling off the screen’s corners or edges. You can use the shades of grays on another pattern to adjust your brightness and contrast settings for optimum visibility without eyestrain. Johannes Wallroth’s Test Screens program (www.programming.de/download/ testscreens.zip) walks you through similar adjustments. Among other things, you can check its displays of tiny text so that you can judge your monitor’s focus, or even perform amateur eye exams. Adjust an LCD monitor Almost all LCD monitors come with built-in software for changing their settings, which you usually control by poking at four buttons along the monitor’s front. Pushing the buttons in the correct sequence adjusts the brightness and contrast, and neatly aligns the picture with the monitor’s edges. The terse and unfriendly menu quickly traps unsuspecting visitors with dead-end menus. (If you’re stuck and can’t figure out how to just get rid of the adjustment menu, ignore the monitor. Most automatically remove their menu 30 seconds after you stop pushing buttons.) To adjust the monitor’s settings when the display shakes, blurs, or doesn’t fit on the screen, try the adjustments listed in the order below. Tip: To control the menu system on most LCD monitors, press the Menu button to summon the monitor’s adjust menu and see its options. The Plus and Minus buttons move up or down the menu’s list of options, highlighting each one in turn. Press the Menu button again to select a highlighted option. And press the Exit button (or choose Exit from a menu) to leave the menus.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
103
Video Card (aka Display Adapter)
• Auto button. Before spelunking through your monitor’s cavernous adjustment menus, look for its handy guide: the Auto button. Built into most modern monitors, the Auto button reads the incoming signal and automatically adjusts your monitor’s screen. By all means, press the Auto button if the image doesn’t fit the screen correctly, or if the color looks awful. • Adjustment menu. If the Auto adjustment button fails, start spelunking. Push the monitor’s Menu button—it often bears a little picture of the monitor—to see a list of options; press the adjacent Plus or Minus buttons to move between options. After highlighting an option you want to adjust—Brightness, for instance— press the Menu button again to enter the Brightness menu. Press the Plus or Minus buttons to increase or decrease the Brightness to your personal comfort level. Press the Menu button again to exit the Brightness settings and move onto another category. Tip: Adobe Photoshop and Photoshop Elements, a digital photo editor bundled with some digital cameras, places an Adobe Gamma icon in your Control Panel. Running Adobe’s Gamma utility walks you through adjusting your monitor’s brightness, contrast, and color settings with ease.
• Foreign language menus. Manufacturers sell your monitor on many continents, so most monitors let you switch the menu’s languages. If your monitor’s menu traps you in a foreign land, keep pressing the Plus or Minus buttons until you see the word “English” on a menu. Push Menu to enter the Language settings, and then push the Plus button until you highlight “English.” Finally, push the Exit menu to revert to English. • Factory Reset. If the monitor looks worse than when you started tinkering with its settings, look for the menu’s Factory Reset option and choose it by pushing Menu. Your monitor instantly looks the way it did when it left the factory, giving you a clean slate for starting over—or leaving well enough alone, should the screen suddenly look fantastic.
Video Card (aka Display Adapter) Windows XP calls it a “Display Adapter,” most people call it a “video card” or “graphics card,” but no matter what it’s called, your PC’s video circuitry translates your PC’s numbers into something visible, and then passes the images along to your monitor. Think of it as the projector for your monitor’s screen. To suit different people, from accountants to kids with joystick-calloused fingers, video circuitry comes in two main styles, described below. 1. Built-in chip. Most people simply need enough graphics power to display words, photos, and maybe a few games on the screen. To cut costs, the PC industry shrunk lowpower video circuitry onto a single chip and popped it onto your motherboard 104
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
(page 16). Known as “onboard video,” this works fine for most people—except gamers, who want to explore computer-generated galaxies.
Video Card (aka Display Adapter)
2. Standalone card. Other people want more powerful video, often for editing video or playing games. This more elaborate video circuitry works like a minicomputer, calculating the geometry needed to update the screen instantly, whether you’re repositioning a window, or watching changing shadows on a mermaid as she undulates through rippling sea grass. With prices averaging $200 to $400, a high-performance video card could be the most expensive thing inside your computer. Whether your PC creates video through a chip or a standalone card, this section explains how to adjust its settings to work best with what you’re doing.
Adjust Video Settings in Windows XP Most video settings hail from early years when video cards rarely matched your PC’s power. Back then, people needed to dial back some settings in order to let the card focus on other areas. For example, they’d cut back on the number of colors displayed onscreen to squeeze higher resolutions from their video card. When first installed, Windows XP automatically squeezes your video card’s muscles and adjusts the video settings to showcase Windows XP at its best. With today’s cheap and powerful video cards, Windows XP usually sets everything to full strength. Occasionally, you need to tweak some settings, like increasing the resolution to view a large digital photo, for instance. To adjust any of your video card’s settings, head to Windows XP’s command central of video settings: Start ➝ Control Panel ➝ Display ➝ Settings tab (Figure 3-11). (If you don’t see the Display option inside the Control Panel, click “Switch to Classic View” in the Control Panel’s left-side pane.) Here’s the rundown of how these settings affect what you see on the screen. • Display. This area names your PC’s currently connected monitor—or at least the one Windows XP thinks is attached. If the name listed here matches the one on your monitor, everything’s fine. But when this says “Generic,” Windows XP has resorted to its own general purpose driver—a bare-bones driver that won’t correctly list all your monitor’s capabilities. To update the driver, visit the Web site of your monitor’s manufacturer, drop by its Customer Support section, and then download the driver for your specific model of monitor. Run its installation program, and Windows XP updates the items on this window to match your monitor’s specifications.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
105
Video Card (aka Display Adapter)
If you’ve connected two or more monitors to your PC, Windows XP lists their names here in a drop-down list. Figure 3-11: The choices in this window let you adjust your screen resolution, so you can pack more or less information onto your screen, and choose the number of displayed colors. Most people leave both settings at their highest levels, since that produces the best image on most digital monitors. If the high resolution makes the text difficult to read, click the Advanced button and increase the “DPI” setting. That makes the letters larger, but preserves your screen’s crisp, detailed look.
• Screen resolution. This sliding control lets you choose your display’s resolution—the size of the pixel grid it uses to display images. LCD monitors come with a fixed number of pixels, so they work best when set to the highest resolution available. Choosing a lower setting still works, but looks awful, forcing the monitor to blur together adjacent pixels to mimic lower resolutions. (CRT monitors don’t have this problem, as they can change the size of the pixels to match lower resolutions.) Tip: If the highest resolution shrinks your LC monitor’s text beyond legibility, click the Advanced button (page 107) to increase the DPI (Dots Per Inch) setting. Your letters will be larger and clearer when you restart your computer.
• Color quality. Windows added this drop-down control several years ago to let people choose the number of colors displayed at one time. (Older video cards lacked the power to display many colors simultaneously.) Today’s video cards fixed that problem, so people usually leave this at its highest setting, usually “32-bit.” (That works out to 16,777,216 colors, enough for all but the most finicky graphic artists.) If Windows looks bloated and lacks its usual vivid colors when first started, Windows XP probably started in “Safe Mode,” a troubleshooting mode used when something’s wrong. The picture looks terrible, but it’s enough to let you
106
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
control Windows while diagnosing the problem. (The video card’s often the culprit, usually because it can’t find the correct driver, which is usually available for download on the manufacturer’s Web site.
Video Card (aka Display Adapter)
• Troubleshoot. This button summons the Video Display Troubleshooter in Windows’ Help menu. Useful as a last resort (provided you can still see the monitor), it interviews you about your problem and offers suggestions. • Advanced. Click this button when you’re having serious trouble with the display; it grants quick access to the drivers (page 514) for your video adapter and monitor. The General Tab’s DPI setting is an often overlooked gem; it lets you beef up the size of your letters and menus should the high Screen Resolution shrink them beyond legibility. Owners of older, CRT monitors should check the Refresh Rate on the Monitor tab. Set it to the highest rate the monitor offers (usually 75 Hz or more) to avoid flickers. (LCD monitors work fine at 60 Hz.) GEM IN THE ROUGH
Making Letters Large Enough to Read Digital monitors offer crisp and clear displays only when set at their highest resolution. That high resolution also lets you squeeze more information onto the screen, which is handy for copying information from one window and pasting it into an adjacent email. But when set to a high-resolution, sometimes the display’s text becomes too tiny to read.
devote more pixels to its content, making everything bigger. To change your DPI settings, right-click the Start ➝ Control Panel ➝ Display ➝ Settings Tab ➝ Advanced ➝ DPI Setting.
To solve the problem with a CRT monitor, simply switch to a lower resolution, sacrificing desktop space for better legibility. But digital monitors blur when they’re not set at their highest resolution. What’s the solution to keeping everything crisp and legible?
Windows normally uses 96 pixels to create an onscreen inch, or 96 DPI. Choose Large size (120 DPI) from the DPI setting’s drop-down menu to increase the size of characters by 25 percent. To complete the process, Windows may need to install some fonts (occasionally asking you to insert your Windows XP CD), and then you may need to restart your computer before the change takes place.
The trick is the (Dots Per Inch) DPI setting, which keeps the display’s crisp, high resolution, but tells your monitor to
But when Windows reawakens, it sports a fresh new look: crisp and legible.
Upgrade Your PC’s Video Card Most people never upgrade their PC’s video card. When the video works, it works fine for years—usually for the life of the monitor. Still, you may want to upgrade the quality of your PC’s video for these reasons: • Speed. These days, two of the best ways to speed up an old PC come by adding memory (page 18) or adding a faster video card. Your PC may be plenty powerful, but if the video card can’t sling the information onto the screen quickly enough, your PC slows down.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
107
Video Card (aka Display Adapter)
• Dual monitors. A second video card lets you attach a second monitor (page 89) to your PC for a wider desktop vista. • Television. Many new video cards come with a built-in TV tuner, letting you watch TV on your desktop. With a TV tuner, you can even keep your favorite channel running in a little window in your screen’s corner. • Upgrading your LCD monitor. If your current LCD monitor accepts digital video (page 87) but you’re plugging it in through a VGA port, you’re not seeing your display at its best. Replace that old video card with a digital one to put some dazzle in your monitor’s display. Follow these steps to upgrade your motherboard’s built-in video with a new video card, replace an existing video card, or add a second video card to your computer. 1. Identify your PC’s video slot. Powerful video cards demand lots of attention from your PC. Consequently, your PC’s motherboard—that flat plate holding all your PC’s circuitry—gives the card a special communications channel: a high-powered slot created just for the video card. But since video technology changes so quickly, engineers redesign that slot’s capabilities nearly every year. And that brings trouble: before you know what type of card to buy, you must figure out what type of video slot lives on your motherboard. You can open the PC’s case (page 12), look at the slot (page 27, and examine the fine print written next to the slot. Or, you can find your motherboard’s manual and look up its AGP Bus specifications. But it’s much less work to run SiSoftware’s free Sandra software (page 12). When the program starts, run the module named “PCI(e), AGP, CardBus Bus(es) Information.” Sandra examines your video slot and spits up the dirt, as shown in Figure 3-12. 2. Buy the right card for the slot. If your motherboard contains a PCI-Express slot, you’re in luck. Buy a card matching the speed of your slot (that’ll almost always be a 16X card) and count your blessings. PCI-Express is a newer standard that’s faster than AGP, and is well-supported by the latest video card manufacturers. But if your motherboard contains an AGP slot, fasten your seatbelt. The AGP slot evolved through six different specifications over the years, with each new breed using a perplexing variety of voltages, slot sizes, and holding latches. Sprinkling in more anguish for the consumer, AGP card manufacturers consistently mislabel their cards’ speeds, voltages, types, and capacities. The solution? First, don’t buy AGP cards from stores that don’t accept returns. Second, buy a card that’s the same speed as your slot: 2x, 4x, or 8x. (Each “x”
108
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
shows how much faster the card is than the original AGP slot.) Cards with faster speeds are generally backward compatible—they still fit into slower-rated slots, but they’ll fall back to meet that slot’s slower speed. Buying a faster card than your PC’s slot supports is a waste of money.
This PC contains an AGP slot This slot supports AGP version 2.0 This slot supports a 1x (slow) and 2x (faster) transfer rate
Video Card (aka Display Adapter)
Figure 3-12: Top: The free program Sandra identifies the video slot on this 1999 PC as AGP (Accelerated Graphics Port) Version 1.0. The card supports speeds of 1x and 2x, meaning it’s compatible with the first released AGP cards, as well as that card’s twiceas-fast replacement. To buy a video card for this computer, buy an AGP card that supports both 1x and 2x transfer rates. (Look for the words “AGP 2x” somewhere on the new card’s box.) Bottom: Sandra identifies the video slot on this 2004 PC as PCIe (Peripheral Connect Interface Express) with a width of 16x—the longest and fastest of the PCIe slots. To upgrade this PC, buy a PCIExpress card with a width of 16x. The card’s box should say “PCI-Express 16x.”
This PC contains a PCIe (PCI Express) slot This slot supports a 16x card
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
109
Video Card (aka Display Adapter)
3. Insert the card into the slot. After identifying your slot and buying a card that works with it, the hard part’s over. Push the card into your motherboard’s video slot and secure it as described on page 30. If the card doesn’t fit, then you bought one that’s incompatible with your slot. Return it, and buy a different brand or model that’s the same speed as your AGP slot. When you turn your PC back on, Windows XP discovers the new card and shuffles around, looking for the card’s driver. To help Windows XP find it, run the Setup program on the CD that came with the new video card. If the driver gives you trouble or you need help installing it, page 514 contains a detailed guide to installing drivers. If your PC doesn’t start at all—it begins beeping at you or displays an error message—your new card isn’t compatible with your motherboard. Make sure you’ve identified your video slot correctly in step 1, and then exchange the card for a different, more compatible model.
Troubleshooting Video Card Problems When something’s wrong with the display—the colors don’t look right, a moving window leaves a trail across the screen, or you spot other video oddities—fingering the culprit often proves difficult. The monitor displays only what the video card sends it, so when something on the monitor looks off, the problem usually lies with the video card. Run through this list of fixes to solve the problem. • Update the driver. Video companies update their drivers more quickly than any other PC industry. Sometimes new drivers appear on a weekly basis. Before assuming something’s wrong with your monitor or video card, be sure to visit the Web site of the video card’s manufacturer. Visit the Customer Service or Support area and download the latest driver for your particular video card. That cures most problems. If the latest driver makes things worse, “roll back” to the old driver (see page 516). Then try a slightly older driver from the video card manufacturer’s Web site. Video card drivers are picky, and some people find that older drivers work better with their PC’s equipment than the newer ones. When you find one that works, make a note of its version (see Figure 16-7) and stick with it. • Check the card’s fan. Being tiny computers themselves, video cards generate enough heat to fry a finger. Today, most video cards include built-in fans. Remove your PC’s case (page 12), and make sure the card’s fan is still spinning. If it’s not, check to see if the fan’s power connectors are tightened. On the other hand, if your computer’s main fan isn’t working, you need a new power supply (page 47).
110
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• Verify the slot type. AGP slots and cards use a special notch and groove system to ensure that only compatible AGP cards and slots fit together. If a little notch in the slot keeps your card from fitting, be thankful: the card and slot use different voltages, and the little notch keeps you from frying both your new (but wrong voltage) video card and your motherboard.
Chapter 3: Monitors and Video PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Video Card (aka Display Adapter)
111
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
chapter
Chapter 4
4
Printers
Printers give you a sense of physical accomplishment—something otherwise lacking in your interactions with your PC. You can hold printed sheets in your hands or pass them out with a flourish at a meeting. To help with this transformation from digital to physical, this chapter guides you through the following tasks: • Selecting the right printer for your needs. • Connecting and setting up a printer (or several) to your PC or laptop. • Printing on the correct side of the paper, including printing long documents on both sides of the paper. • Printing envelopes, including return addresses. • Printing digital photos on your printer or at one of several professional developers. • Distinguishing between paper types, so you choose the right one for whatever you’re printing. • Replacing ink and toner cartridges, fixing paper jams, and buying replacement parts.
Printer Basics You’ll find three main kinds of printers on the market today: inkjets, laser printers, and all-in-one devices. Consumers gravitate toward inkjet and all-in-one printers; businesses lean toward laser printers. The following pages explain how
113
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Printer Basics
these printers work, which tasks they perform best, and which one you need for your work. FREQUENTLY ASKED QUESTION
Printer Language: Bitmaps, Vectors, Postscript, and PDL and PCL While reading about printers, I read that some handle “vector” images, others print “bitmapped” images, and others print PCL and Postscript. What’s the difference, and why should I care? For most people, those terms boil down to buzzwords on a printer’s spec sheet. A test printout you can hold in your hand on the showroom floor vouches for a printer’s strengths much more accurately. For a lesson in printer lingo, however, read on. Early printers worked like typewriters, printing character by character. Computers merely sent character info and “line feed” commands to the printer: print the following words, numbers, and spaces, drop down a line, and then resume printing. Computer graphics changed that world forever, creating a bevy of print-related terms. • Bitmap. Also called “raster” images, bitmapped images contain a large grid of dots. The computer sends the grid—a map of bits—to the printer, which maps out the dots on paper. Most printers print 300 dots per inch, which requires a lot of bits. Storing those pages requires lots of space, either in the printer’s memory or on your PC’s hard drive. Also, you can’t enlarge grids very gracefully—enlarging a bitmapped corporate logo, for instance, often leads to jagged edges when you print it out. (Windows’ Paint program often stores files as bitmaps.) • Vector. Instead of storing maps of dots, vector graphic images contain instructions and equations. That works great for drawings. A picture of a square, for instance, needs only a description of the square’s four corner locations, plus instructions for connecting their outside edges. Storing instructions creates smaller files than bitmaps create. And since they’re based on equations, vector images are scalable—you
114
can enlarge or reduce them without losing quality, something architects appreciate when quickly changing the house plans for a different sized lot. • PDL. A Page Description Language describes any method of printing a page more gracefully than plain ol’ bitmaps, including PostScript, described next. • PostScript. Computers rely on programming languages, so the Adobe company created one especially for printers. PostScript mixes bitmaps, vectors, and programming tricks to create a universal language for printers. Save your document as a PostScript file, and any PostScript-compatible printer can print it. PostScript revolutionized personal computing by turning a PC into a publishing house. A realtor could create a brochure on his PC, save it as a PostScript file, and then send it to a professional printer for professional publishing at a low cost. The graphics industry still thrives on PostScript. Want to print a PostScript document on a non-Postscript printer? Try printing it with Ghostscript (www. ghostscript.com), freebie software that converts PostScript files into simple bitmaps understandable by other printers. • PCL. Instead of paying Adobe’s PostScript licensing fees, some companies simply created their own PDLs. Hewlett Packard’s Printer Command (or Control) Language works like PostScript, but lets the printer’s driver (page 514) translate the language into something that a particular printer understands. Many companies adopted PCL rather than PostScript to cut costs, making desktop printers more affordable.
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Inkjet
Printer Basics
Inkjet printers (sometimes called “bubblejet” printers) bring quick and easy color printing to the masses. They’re versatile as well, printing everything from perforated business cards to glossy photos to novels. Figure 4-1 shows one inkjet printer, which, like most of its brethren nowadays, is compact, quiet, and easy to use. The real deal-clincher? Inkjets are cheap—$50 for a mediocre model; $200 for good one. Figure 4-1: Expensive replaceable cartridges inside inkjet printers spray ink onto paper to create photos, letters, or even iron-on Tshirt transfers. The printers come cheap— usually between $50 and $200—but their cartridges don’t; they usually cost between $10 and $30 apiece. Inkjet printers prove cost effective for people printing casually— say, a few times a week.
But although inkjet printers sell for a song, their ink cartridges don’t, much to the glee of manufacturers. Taking a tip from razor vendors, printer manufacturers sell printers at little or no profit, making up the difference by repeatedly selling you replacement ink cartridges. Inkjet printers work much like robotic airbrush artists. Tiny nozzles in the printer spray ink onto the paper, creating images in an elaborate game of point, switch colors, and spray. Surprisingly enough, the process works. Those crisp letters look haphazard only when examined under a magnifying glass. Most inkjet printers work their wonders with one black ink cartridge, and one filled with a handful of colors. Monitors can display 16.7 million colors—far too many to fit in a shopping cart, much less a printer cartridge. So printer manufacturers took a lesson from low-budget street painters—they fill the color cartridge with separate tubes of color: red (magenta), blue (cyan), and yellow. By mixing those three shades in different proportions (and sprinkling in a little black to darken the shade), the printer mixes custom colors on the fly.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
115
Printer Basics
Color cartridges also contain an unfortunate side effect, noticeable after printing lots of one color—a Web site with lots of blue ads, for instance. When the cartridge runs out of blue, it’s worthless for creating other colors—even though it may be two-thirds full of red and yellow. The manufacturer’s solution? Buy a new cartridge, of course. Alternatively, some more expensive printers let you install separate cartridges for the three main colors, reducing the waste somewhat. Photo printers add three more colors to the mix: light red, light blue, or some light gray or green. The extra colors help recreate the natural colors and skin tones shown in most photographs. Tip: Always turn off your inkjet printer after using it. The printer seals the cartridges before shutting down, thereby keeping the ink from drying up.
Laser Laser printers (Figure 4-2) cost much more than inkjet printers, with prices starting around $150 for a low-end model. Double or triple that price for color laser printers. So why bother at all? Because when you figure in the extra costs of inkjet paper and cartridges, lasers cost much less per page to print, which can be a deal clincher for people who print on a daily basis. Laser-printed pages also stand up better to water; inkjet-printed papers smudge when pelted by rain, while your laser-printed pages escape without a blemish. Figure 4-2: Laser printers toss their dots onto a page with a complex combination of laser beams, electric charges, heat, drums, and black plastic powder known as toner. Laser printers pack 600 dots per inch, and create very clear, detailed printouts. With laser printers, it costs much less to print per page than with inkjet printers, but only the most expensive models print color. Laser printers’ low per-page cost makes them attractive to people who print on a daily basis.
To decide between inkjet or laser, think how often you need to print in color. Most laser printers print only black—which is fine for letters, but dreary for photos. The
116
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
newest color laser printers boost the starting price to around $500—10 times more than a low-end color inkjet, and way past most budgets. And if you want to print occasional photos, forget it. Color laser technology hasn’t yet reached the level of inkjets.
Printer Basics
Laser printers take their technology from the age-old copying machine. A printer’s laser projects the page’s image onto a revolving drum using a dotted pattern of electric charges. The drum passes over very fine plastic powder known as toner. Just as static electricity sometimes attracts bits of dust, the powder sticks to the charged electrical pattern on the drum. The revolving drum then drops the toner onto the paper, and the printer seals it in place with pressure and heat. (That’s why newly printed pages feel warm and cuddly right out of the laser printer.) The latest “laser” printers dump the laser in favor of LEDs (Light-Emitting Diodes), albeit much higher-powered LEDs than the red ones found in ugly clock radios. Instead of waving a laser at the drum, these printers send high-intensity light through a stationary row of LEDs, thus reducing mechanical breakdowns and requiring less maintenance than their old-school laser predecessors.
All-in-One Printers Many well-equipped modern desks resemble an island of beached electronics with one LCD monitor protruding from the pile. All-in-one (also called multifunction) printers (Figure 4-3) reclaim your lost elbow room by squeezing your desktop printer, scanner, and fax machine into one small unit. Combining the printer and scanner turns the unit into an on-the-fly copying machine, as well. Figure 4-3: All-in-one printers combine a desktop printer, scanner, and fax machine into one bulky but convenient package. When shopping, look for one with an ample-sized color screen (circled). You’ll be working on that screen when making minor, on-the-fly edits to remove red-eye or adjust the color values in your pictures.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
117
Printer Basics
Most all-in-one printers also offer media card readers to print photos on the fly. Remove your camera’s memory card, push it into the printer’s ever-so-convenient memory card slot, and select the pictures to print—all without firing up your computer. Of course, that also removes your chance to crop out those strangers standing by the fountain, tweak the orange in the sunset, or airbrush out an ex. All-in-one printers sell well for several reasons: • Size. Squeezing four machines into one attracts computer owners who work in small spaces. • Cheap. The components work together, so they’re cheaper than buying a separate printer, scanner, fax machine, and copying machine. The fax machine borrows the scanner and printer, for instance, reducing the fax machine’s components to one tiny chip. • Simplicity. One company built all the components, eliminating any compatibility problems. One menu guides you through controlling each part, saving you from learning four menus on four machines. • Standalone. With most all-in-one printers, you don’t even have to attach your computer to the printer. To print out your digital camera’s photos, just insert the camera’s flash card into the printer and push some buttons on the menu. Your computer can sleep while you and the printer are busy. Critics point out their flaws, as well: • Vulnerability. The interwoven parts rely on each other, so a drowning scanner also takes down the copy machine and the fax machine. A dead printer kills both the fax and copy machine. • Lower quality. All-in-one units work adequately, but never extraordinarily. Don’t count on advanced features like quick printing, high-resolutions prints or scans, or the ability to handle different-sized paper. • Limited upgrades. The intertwined components limit your upgrade ability. You can buy a higher resolution scanner to digitize your old family photos, for instance, but it won’t work well (possibly not at all) with the all-in-one’s printer, copying machine, or fax machine. • Limited functions. Manufacturers cut corners to reduce costs. Some models lack print trays for instance, chaining you to the computer to feed it, sheet-bysheet.
Garage Sale Models Older technology printers turn up for tempting prices at garage sales, estate sales, swap meets, and on eBay. Many still work well, and BuyPrinters (www.buyprinters. com) stocks thousands of printer ribbons and other supplies for niche models. These printers turn up most often in the bottom-feeder market:
118
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• Dot matrix. Largely forgotten in the consumer rush to color inkjet printers, dot matrix printers work much like a lowly typewriter. But instead of creating an imprint by pushing a single character against a ribbon, they push a grid of metal pins. The printer quickly changes the grid into different shapes to form different characters. The finer grid of a 24-pin dot matrix printer produces more refined characters than the coarse grids of the cheaper 9-pin models.
Installing a Printer
Dot matrix printers can’t handle color or fine graphics, but they’re extremely economical. They cost only a penny or two per printed page, and some frugal owners even go so far as to dip an aging ribbon in ink, rewind it, and pop it back into the printer to double or triple the ribbon’s life. Dot matrix printers work great for printing receipts, invoices, and creating other paper trails. Unlike most printers, dot matrix printers can print through carbon copies, which is helpful for filling out duplicate forms in offices. Used models sometimes cost less than a single inkjet cartridge—a bargain if you print lots of drafts. • Thermal. You see thermal printers in action every day: Receipts from your ATM, gas pump, and grocery store all crept out of them. Thermal printers pass heat over specially treated paper, darkening it into characters. Small and lightweight, they forged the way for the portable printer market. Thermal printers print only one shade, so forget about colors or letter quality. If that garage sale thermal printer uses fax machine paper, you may be in luck; POSPaper (www.pospaper.com) sells a wide variety of rolls. Otherwise, pass this one by. • Daisy wheel. Daisy wheel printers contain a revolving wheel; each spoke of the wheel contains a different keyboard character. The printer slaps characters against the ribbon, leaving imprints indistinguishable from a hand-typed manuscript. They’re loud, slow, and limited to the characters on their currently installed wheel—no graphics, unless you count the underline key. They’re fantastic for people wanting that vintage “hand-typed” look, but before tossing it in your trunk, search on Google for that particular model to see if anybody still sells ribbons or wheels. Some models remain compatible with electric typewriters, which means a ready supply of available parts is out there. Try Daisy (www. itsdaisy.com) for parts and supplies. (Log onto the site as Guest for a look-see.)
Installing a Printer Most printers today connect to a computer’s USB port (page 34) using a rectangular-shaped plug that pushes into a similarly rectangular-shaped hole. USB printers and their cousins, FireWire (page 38) printers, both embrace Windows’ “Plug and Play” technology. When you first plug in and turn on the printers, Windows morphs into a friendly receptionist, greeting your newly plugged-in printer by name. After the small talk, Windows looks up the printer’s model in its database, installs
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
119
Installing a Printer
the appropriate driver from its built-in stash of more than 900 models, and leaves you ready to print. LAPTOP LIFE
Printing on the Road Only travelers who need a constant flow of printed copies pack a portable printer, which sells for around $200–$300. Weighing less than four pounds, many luggables now spit out photos as well as reports. (Some even grab their power from a car’s cigarette lighter.) But dangling that extra four pounds on your shoulder (plus the cable and paper) may convince you to pursue these other options. • Fax. The time-tested trick used for more than a decade by desperate road warriors, fax machines provide something to hand out in the conference room. Fax your document with your laptop’s fax modem to the nearest fax machine, grab it, and run. It’s not highquality or color, but at least it’s on paper. • FedEx Kinko’s. Lug your laptop to FedEx Kinko’s (www.kinkos.com) and print your file on one of their onsite printers. The Web site offers maps and directions to nearby locations and tells you which ones print digital camera photos. To save time, download FedEx Kinko’s software (fedexkinkos.com/fpjk) onto your laptop. This software lets you print over the Internet to the FedEx Kinko’s store of your choice for quick pickup. Printer options include color, black and white, choice of paper, and binding options. For extra convenience,
tell the software to FedEx your printout either back to you or to those eagerly awaiting board members across the continent. • Hotels. Most hotels offer business centers, complete with printer (and PC, should you need one). For quickest results, unplug the printer from the business center’s PC, plug the printer into your laptop, and use Windows XP’s Add Printer Wizard (page 123) to install a driver for the hotel printer. Fire up your document and start printing. • Photo kiosks. For quick photos, drop by one of the drug stores or megastores (Wal-Mart, Target, and so on) that offer photo kiosks for photos. Most accept the memory card right out of your camera; others also accept CDs and keychain drives. • Internet. PrinterOn (www.printeron.net) and PrintMe (www.printme.com) both let your laptop (and PocketPC, BlackBerry, or cell phone) print through the Internet. Vendors with waiting printers include hotels, Internet wireless hotspots, and some airports and colleges. Visit the Web sites to locate the closest printer in your area and calculate the costs. Another possible tactic: ask the front desk clerk if you can email a copy of your document to him for printout on the staff printer.
Windows XP’s built-in printer drivers work like a jack of all trades, but, as the saying goes, they’re master of none. They let your printer handle basic printing tasks, but leave out support for your printer’s fanciest features: shrinking documents to fit on a page, for example, or adding special colors to enhance photos, or advanced page previews. That’s why it’s often better to install the printer manufacturer’s own driver, found on the CD that’s usually packaged with the printer. Built specifically for your particular printer model, this driver lets you take advantage of features Windows XP doesn’t know about. You can install the manufacturer’s driver after seeing how you like Windows XP’s built-in driver, or you can install it before plugging in your printer.
120
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Tip: Instead of installing the manufacturer’s driver with its own installation software, install it through Windows XP’s Add Printer Wizard (see page 123), instead. The wizard plucks the driver neatly from the installation CD and installs it, leaving out all the extra trial software and other unnecessary software packaged with printers these days.
Installing a Printer
Figure 4-4 compares Microsoft’s built-in driver with the one installed by the printer’s manufacturer. To make sure you’re using the newest printer driver—one that fixes any bugs belatedly discovered on the version shipped with your printer, download the latest driver available: visit the manufacturer’s Web site and drop by the Downloads section, which you can usually find in the Technical Support area. Then download the newest driver listed, run its installation program, and Windows XP switches to it. Note: Windows XP may bug you when you plug a USB printer into your PC, saying “This USB device can perform faster if you connect it to a Hi-Speed USB 2.0 port.” That’s Windows XP’s way of saying your printer still works through your PC’s old USB 1.1 port, but sending it large files is like pouring a bucket of water through a straw. To send files more quickly, upgrade to a USB 2.0 port (page 34) and plug your printer into one of those newer ports.
Most people can plug their printer into their PC’s USB port, let Windows handle the messy installation chores, and consider the job done. But if your printer connects to your PC in a different way—through a network, Bluetooth, or a serial, parallel, or infrared port—the next two sections explain the process.
Network and Bluetooth Printers When you bring that second computer (or third, or fourth) into the house, you needn’t buy a new printer for each one. Instead, install one printer, and network the computers—connect them using one of several inexpensive methods covered in Chapter 14. Networking lets every computer to print to the same printer, as well as share the same Internet connection, and even share the same files. • Network. If you or somebody else has installed and “shared” a printer on your network (described on page 437), Windows can automatically locate the printer’s name and location. Unfortunately, Windows can’t tell you whether a networked printer’s turned on, out of paper, broken, or currently being used by Jerry to print 300 sheets for his origami society meeting that night, so you still may need to get out of your chair and ogle the printer’s status. • Bluetooth. The same holds true for printers using Bluetooth, a wireless technology that spans about 30 feet. After installing a Bluetooth adapter to your PC (see page 452), you can print to any Bluetooth printer within that range.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
121
Installing a Printer
To install either a networked printer or Bluetooth printer, head for the Add Printer Wizard (see page 123). Figure 4-4: Top: When you install a printer, Windows XP usually installs a driver that lets you print immediately—without installing any software that came with your printer. Windows XP’s driver, shown here, lets you access the printer’s most basic functions. Bottom: Printer manufacturers constantly update their drivers, so if you download your printer model’s latest driver from the manufacturer’s Web site, Windows XP lets you access more features.
122
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Parallel, Serial, and Infrared Printers
Installing a Printer
Some older printers cling to their old-school connectors. These three turn up most often. • Parallel. The oldest printing technology, parallel printers plug into the biggest port on your PC: A long, thin, 25-pin parallel port (page 46), usually with a printer icon stamped into the metal nearby. The gaping connector on the end of your printer’s cable pushes into the port (the connector only fits facing one direction). Once it’s inserted, push the two little clasper rings shut to hold it in place. • Serial. An oddball even in their time, serial printers plug into the smaller serial port (page 46). • Infrared. Yesterday’s vision of what Bluetooth’s now become, infrared devices talk by flashing beams of invisible light at each other, like a TV remote control. Many laptops come with infrared ports, usually resembling little translucent plastic ovals or rectangles on the laptop’s front or side. To connect with the printer, face the laptop’s infrared port toward the printer’s. Since infrared works only on clean desks, the ports need an uninterrupted line of sight to work. The line-of-sight problem and the lack of infrared ports on desktop PCs killed the development of infrared printers fairly quickly. Windows sometimes recognizes these types of printers automatically when they’re installed and turned on. If not, you’ll need to fire up Windows XP’s built-in Add Printer Wizard, described in the next section.
Add Printer Wizard Windows XP’s built-in Add Printer Wizard comes in handy on three occasions: • You plug a printer directly into your PC, but Windows XP says it can’t find a driver. • You want to add a printer connected through a network. • You want to add a printer connected via Bluetooth. The wizard automatically appears if Windows XP can’t find a driver for your newly plugged-in USB printer. But if Windows XP doesn’t automatically fetch the wizard, wake the wizard yourself: choose Start ➝ Control Panel ➝ Printers and Faxes ➝ File ➝ Add Printer. When the wizard arrives onscreen, click Next to put it to work and then follow these steps: 1. Tell the wizard what type of printer to set up, and then click Next. • To connect to a printer connected to your PC with a cable, choose “Local printer attached to this computer,” and then turn on “Automatically Detect and Install my Plug and Play Printer.” Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
123
Installing a Printer
• To connect to a Bluetooth printer, choose “A Bluetooth printer.” The wizard probes any nearby radio waves for a nearby Bluetooth printer. (Make sure your Bluetooth printer’s turned on.) This option appears only if Windows XP recognizes your PC’s Bluetooth adapter. If you don’t see the option, add a Bluetooth adapter (see page 453) to your PC. • To connect to a network printer, choose “A network printer, or a printer attached to another computer.” When you click next, choose “Browse for a printer,” and then select your network printer from the list. You may need to double-click Microsoft Windows Network to see the printer. If the wizard’s magic works, Windows XP discovers your newly installed local or nearby Bluetooth printer and installs a driver (or asks you to insert the installation CD so it can grab a driver there). The wizard finishes by offering to print a test page to make sure everything’s kosher. Click Yes, especially if it’s the first time you’ve tried printing to the printer, just to make sure the printed page looks okay. If your printer somehow eludes the wizard’s grasp, head for the next step. 2. Select the port your printer uses to connect to your PC, and then click Next. Windows XP lists a handful of ports; choose the first one, dubbed “LPT1.” On the rare chance you plugged in a serial printer, choose “COM1” instead. 3. Choose your printer’s manufacturer and model, and then choose Next. Windows lists printer manufacturers from Agfa to Xerox. Choose your printer’s manufacturer from the left column, as shown in Figure 4-5, and then select the model from the right. Windows should automatically install the driver. If it doesn’t, Windows offers you these two suspender straps: • Have Disk. Have the installation software that came with the printer, or a driver you’ve downloaded from the Web site? Then insert the floppy or CD into your PC (or browse to the folder containing your downloaded driver), click the Have Disk button, and then let Windows install that driver. • Windows Update. Don’t have the software that came with the printer? Click the Windows Update button; now that you told Windows your printer’s manufacturer and model, Microsoft may be able to find the right driver online. 4. Name your printer and select it as the Default Printer, if desired. Choose a simple name for your printer. For instance, choose “Photo Printer” instead of “EpsonSty” or the awful name Windows XP suggests. An easily identifiable name not only helps any networked PCs find that printer, but lets you easily locate the printer on any software’s Print menu.
124
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
The Default designation applies to only one of your printers, should you own several. Windows XP automatically routes all printing jobs to that printer, unless you tell it otherwise just before printing.
Installing a Printer
Figure 4-5: Click your printer’s manufacturer from the left column, and the printer’s model name from the right column. Or, if you have the printer’s installation CD or a newly downloaded driver, click Have Disk, instead. Then browse to the inserted CD or the folder containing the download. Windows displays only names of drivers in the Browse window, making it easy to spot a driver among a sea of file names. Click Next, and Windows installs your printer’s driver.
5. Print a test page. Printing a test page—a single sheet of paper with brief text and graphics—lets you prove that your printer works and Windows XP knows how to talk to it. Yes, it wastes ink and a sheet of paper, but you get the peace of mind knowing that your installation efforts succeeded. Tip: When Windows XP’s Test Page tests your printer’s capabilities, it doesn’t print meaningless Latin phrases. Instead, it prints your printer’s name, its connected port, and all its driver files, complete with their version numbers. This kind of stuff excites the printer manufacturer’s tech support staff, should you find yourself on the phone with them during installation.
If the printer still has trouble talking to your printer, the wizard doesn’t leave you stranded. It summons the Printer Troubleshooter program—a sort of high-school test where you select answers from a list while Windows XP runs tests and asks you if anything happened. Although it’s only a robot, like the wizard, the Printer Troubleshooter checks your settings, and then leads you through a thorough checklist of the most obvious fixes—an unplugged cord, for instance, or a missing driver. That bit of knowledge helps you nod your head more confidently when answering those same questions from the manufacturer’s tech support people over the phone. And sometimes the Troubleshooter unveils a simple yet overlooked fix—the printer’s out of paper, for instance, or has a paper jam or loose cable.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
125
Choosing Printer Paper
Setting Up a Printer’s Default Preferences When you click the Print button to send your work to the printer, Windows XP makes basic assumptions about how you want the job to look. Since most people print on cheap paper, for instance, Windows XP always assumes you want a single copy of your work printed on plain paper. If you always print duplicates, though, or always print on higher-quality paper, you can let Windows know. Doing so spares you valuable time changing your printer’s options whenever you print. To change your printer’s default preferences, choose Start ➝ Control Panel ➝ Printers and Faxes. Right-click your particular printer, choose Preferences, and then set it up exactly the way you want: change the paper quality, print quality, number of copies—anything that suits the way you work. When you choose OK, Windows XP remembers those preferences and chooses them automatically whenever you print something. That turns printing into a one-click operation rather than a three-, four-, or five-click chore. Tip: Having to change printer settings wastes time as well as paper—say, for example, when you accidentally print photos in “draft” mode. If you find that you’ve got more than one set of printer settings that you frequently use, you can create multiple printer icons—Photo Printer, Draft Printer, and so on. To do so, install your printer again, letting Windows create a second icon for it. Then set one printer’s options for photos, and name it “Photo Printer.” Change the other printer’s options and name it “Draft Printer.” Create others to match different needs. When it’s time to print, just select the printer with the appropriate settings, and spare yourself the trouble of changing settings yet again.
Choosing Printer Paper Laser printers aren’t very picky about their paper. Buy plain old copy machine paper, available at office supply and drug stores worldwide, and your printouts will look just fine. (If you’re one of the lucky few who own a color laser printer, buy paper specifically designed for color laser printers; the regular stuff won’t hold the color well, and inkjet paper won’t work.) Inkjet printers, on the other hand, are very picky about paper. They can’t use laser printer paper, as it lacks a polymer coating—a special chemical that lets the ink bind with the paper. Without the polymer, the ink smears, leading to blurring, dirty nozzles, and ink smears. Although they’re picky, inkjet printers still give you plenty of different paper types to choose from. In fact, manufacturers have flooded the market with different paper varieties. To help confused customers choose the right inkjet paper for their
126
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
printer, Epson even offers the fairly useful Epson Paper Finder, which you can visit at www.epson.com (see Figure 4-6).
Choosing Printer Paper
Figure 4-6: Epson sells inkjet paper in hundreds of sizes and styles to please professionals as well as consumers. To find the right paper for your printer, select your printer model, desired paper size, and the paper’s finish. Epson quickly whittles its whopping list down to a handful of suitable choices.
When choosing paper for your inkjet printer, narrow down the pack by following these steps. 1. Choose paper that fits in your printer’s tray. Paper comes in a wide variety of sizes, so measuring the size of your printer’s paper tray rules out many contenders. Most inexpensive printers can’t handle paper wider than the standard eight and a half inches, although they still work with longer, legal sized (8.5 × 14 inch) paper. If the paper tray has a “slider” for adjusting its width, measure the tray with the slider at full width. Many printers choke on thick “heavy weight” papers, often used to print cards or special photos. To find out your printer’s paper-size and weight limitations, visit its manufacturer’s Web site. Head for the Customer Service area, and look up your printer model to see any limitations on paper size and weight. Tip: Does your printer specifically call itself a “photo printer”? If not, rule out photo paper. Photo printers contain special cartridges with extra colors to print realistic photographs; regular printers don’t contain enough colors to produce quality photos.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
127
Choosing Printer Paper
2. Choose the paper listed on your printer’s Preferences menu. Your printer needs to know what type of paper you inserted in order to spray the right amount of ink. To see what paper your printer understands, visit the printer’s Preferences menu. Choose Start ➝ Control Panel ➝ Printers and Faxes. Right-click your printer, and choose Printing Preferences to see its favorite papers, as shown in Figure 4-7. Most office supply stores carry those particular paper types—either as created by your printer’s manufacturer or available in a generic brand. Figure 4-7: Printers need to know the type of paper you inserted so they can choose the right mixture of inks to match the paper. Before clicking the Print button, look in your printer’s Media Type or Paper Type pull-down menu and select the type of paper you placed in the feeder tray.
3. Choose the paper that matches what you’re printing. Don’t be surprised to see stores listing a paper’s “weight” on the package; to find standard copy machine paper, look for “20 pound” weight paper. A “24 pound” weight works better for formal letters, as it’s slightly heavier. (The heavier the weight, the thicker the paper.) Most office supply stores carry these types of paper for a variety of jobs. • Drafts. Quality doesn’t matter when printing the evening’s spaghetti sauce recipe or tomorrow’s shopping list. Although generic “plain” inkjet paper works fine for these sorts of tasks, remember to save your botched printouts, too; the reverse side works fine for printing drafts, maps, and test runs to make sure you correctly set the margins and alignment. • Office. For printouts you show to others, look for paper designated specifically as “inkjet paper.” If it doesn’t say inkjet, it lacks the coating that prevents blurring. • Photos. When printing photos, nothing beats glossy photo paper (page 138); plain paper looks lousy and won’t last long. • Matte. Thicker than standard paper, matte paper uses texture to keep the shine down, making it both durable and non-glare. Some people like the textured look for photographs, since this type of paper doesn’t reflect the sun as much as other paper types. 128
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• Specialty. Some inkjet paper isn’t really paper at all. Specialty paper (page 132) lets you print on iron-on transfers, labels, transparencies, and other plastic-based fibers.
Adjusting Printer Settings
Tip: Many digital cameras can shoot in “panoramic” mode, great for squeezing in an entire horizon during sunsets. To print these kinds of pictures out, order the longest photo paper that fits in your paper tray. Even if the paper’s too wide, you can cut it to the correct width and save the leftovers for printing smaller photos.
Adjusting Printer Settings Virtually every program ever created by computerkind lets you print out documents by choosing File ➝ Print. Instead of whisking your work straight to the printer, Windows responds by summoning the famous Print dialog box (Figure 4-8). Figure 4-8: Choose Print from any program’s File menu to see this window. The layout varies subtly in some programs, but these basic elements always appear. Click OK to simply send your work to the highlighted printer. The window preselects the most common choices: one copy and all of the pages. But feel free to change the options to meet your needs. Click Preferences to change specific aspects of your print job—choose black and white instead of color, for instance, or let the printer know you’re going to feed it higher-quality paper.
To send your work to the printer without further ado, just click OK. But when you want to tailor your printout, these options appear in the print dialog box of almost every program. • Select Printer. Windows XP lists every printer connected to your PC—whether physically attached or networked. Choose the printer for your job—perhaps Martin’s printer down the hall that’s so much nicer than yours—and Windows sends your work to it. PCs with fax modems also show the fax as an available
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
129
Adjusting Printer Settings
printer; choose it to start the process of sending a fax, described in the online appendix, “Other Cool Things You Can Do Online,” available on the “Missing CD” page at www.missingmanuals.com. Tip: Want the Print dialog box to open with your favorite printer already highlighted for one-click printing? Then click Start ➝ Control Panel ➝ Printers and Faxes. Right-click your preferred printer from the list and then choose Set as Default Printer.
• Preferences or Properties. Although this button’s name varies in different programs, it always lets you change how your printer handles its incoming print job. (To change your printer’s settings permanently, flip to page 126.) Different printers offer different options; some let you print on both sides of the paper automatically, for instance, or switch to a different feeder tray for super-sized paper (handy for printing year-end spreadsheets). One neat trick among most Epson inkjet printers: they work like old-time gas station attendants, offering to check your ink levels to make sure the cartridge has enough juice left to handle the job. • Page Range. Most people leave this set to All, which tells the program to print every page of the document. To print only a certain section of your report—the 53rd page of your 103-page document, say—choose Pages and enter “53” into the surprisingly versatile Pages dialog box. For instance, enter “1–53” to print the first 53 pages, ignoring the rest. Or enter “1,5,7–10” to print pages 1 and 5, as well as pages 7, 8, 9, and 10. Choose Selection to print only the area you’ve highlighted—the “toppings” options from a Web site’s pizza menu, for instance. • Copies. Leave this set to “1” to print a single a copy. But if you need a copy for everybody at the meeting, increase the number accordingly. To save a little time when printing copies of multipage documents, turn on the adjacent Collate checkbox. That prints your pages in order—pages 1–6, then another set of 1–6— but it does take the computer a little longer to spit them all out. But rejoice: at least you’re wasting the computer’s time for change, and not the other way around. Some programs add other options to the Print window. Microsoft Word, for instance, offers a Zoom area, letting you squeeze 2, 4, 6, 8, or 16 pages onto a single sheet of paper. The print’s still legible when two pages squeeze onto a single sheet of paper; the other settings are useful mostly for graphics departments looking at a report’s overall design, making sure the charts and reports carry a similar look and feel throughout a document.
130
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Tip: You needn’t open a file to print it. If you’re comfortable with your default printer settings (page 126), try this for a timesaver: from any folder, select the file or files you want to print, right-click them, and then choose Print. Windows opens each file in the program that created it, prints the file, and then closes the program.
Printing Envelopes
WORKAROUND WORKSHOP
Printing on Both Sides of the Paper People who own expensive printers with a “duplexing” feature can simply click a button to print on both sides of the paper; the printer flips the paper automatically to fill the other side. The other 99 percent of the population employ the following trick to print on both sides of the paper; it’s particularly useful for printing long documents. 1. Insert one sheet of paper into your printer and take note of which side it prints on. (Sometimes penciling in an X on one side of the paper helps.) 2. When printing your document, fill out the Page Range section with the document’s odd numbers—1, 3, 5, 7, 9, 11, and so on. Or, if your software’s Print window allows the option, choose Print Odd Numbers.
3. When the document is through printing the odd numbers, reinsert the sheets of paper to print on the reverse side. (Depending on your printer model, you may need to reverse the pages and/or reverse their order to make sure page 2 prints right-side up on the back of page 1.) 4. Print the even numbered pages. Try printing a sample four-page document to experiment. You may waste a few sheets of paper until you figure out your printer’s sequencing. But that’s nothing compared to the amount of paper you’ll save in the future.
Printing Envelopes An envelope can slide into a printer in way-too-many ways, but only one way works. Naturally, everybody wastes a few envelopes when printing addresses. To waste the least amount, try these hints: • Some printers offer a special tray just for envelopes—look for an icon of an envelope on the tray, conveniently showing which way to insert the envelope. Match the icon’s fold with the one on your envelope. • Some courteous printer software shows you a helpful image demonstrating the proper way to insert an envelope into the feeder tray. To check your printer software’s courtesy level, choose Start ➝ Control Panel ➝ Printers and Faxes. Right-click your printer, and then choose Printing Preferences. Head for the Paper Size area, and then choose Envelope from the drop-down menu. • As a last resort, cut a piece of paper to the same size as your envelope, and then draw a flap on it. Run it through your printer to see whether it prints on the top or bottom side, and whether the flap should face to the right or left. When you find the direction that works, draw an arrow onto an envelope and tape it to your printer facing the correct direction.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
131
Printing Specialized Items
Figuring out the right way to insert an envelope is the hardest part. Once you’ve figured it out, you can do things like quickly print up a bunch of preaddressed envelopes for monthly bills that don’t include their own return envelopes. Microsoft Word offers a built-in envelope printer, shown in Figure 4-9. To print envelopes in Word 2003, choose Tools ➝ Letters and Mailings ➝ Envelopes and Labels. In Word 2000, choose Tools ➝ Envelopes and Labels. Figure 4-9: With its Face Up, Face Down, and Clockwise Rotation options, Microsoft Word shows an astonishing 18 different ways to feed an envelope into a printer. Only one method works, giving you a 94.5 percent chance of failure. When you figure out the correct way to feed an envelope into your particular printer with your particular software, draw a large arrow onto an envelope and tape it to your printer for future reference.
Some printers print only on standard “letter-sized” #10 envelopes designed for standard 8.5 × 11 inch paper. Smaller envelopes, like those made for greeting cards and invitations, may never come out of your printer without a pair of tweezers and a few expletives. Large envelopes with metal clasps, like those made by Kraft, won’t roll through a printer. Instead, print mailing labels and stick them on those envelopes. In fact, some people find it easier to simply print out mailing labels for all their envelopes, neatly bypassing the problem of lining up envelopes in the printer. Tip: Windows offers a wide range of decorative fonts. These fonts look great on greeting cards, but your “Al Capone” font will confuse the post office’s optical character recognition system. Stick with more traditional fonts like Times Roman when printing materials for the mail.
Printing Specialized Items Today’s printers handle more surfaces than just paper. Most office supply stores carry these types of inkjet paper in addition to office paper. • Stick-on labels. The premiere label maker, Avery, sells hundreds of differentsized labels and perforated cards, all on inkjet-printable sheets. Realizing the difficulty of aligning words with the varying size of the labels and cards, Avery
132
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
created the free Avery Wizard software, shown in Figure 4-10, for Microsoft Word. Download the wizard from Avery’s Web site (www.avery.com) and run the software; when you’re done, an Avery icon appears in Microsoft Word’s toolbar. To print on a label, click the Avery icon, and the wizard guides you through choosing your particular type of Avery label—name tags, for instance. Type the names into the wizard’s onscreen blanks, and the Wizard shows you a print preview of your words, neatly lined up to print on the sheet of labels. Press Print, and the printer places your words inside each label.
Printing Specialized Items
Already used a few labels from a sheet? Click Cancel during the Print Preview (Figure 4-10, bottom), and Word displays an editable version of the Print Preview window. Delete the words from the cards that line up with your sheet’s missing labels, and then click Print. When the wizard prints your labels, it skips the empties. • CD labels. Most inkjet printers print directly onto round “peel-and-stick” CD labels, which look much nicer than scrawling on your CDs with a felt-tip pen. Unfortunately, the heat inside some CD and DVD players warps the labels, gumming up the drive. To avoid that problem, the latest printers from Epson (www.epson.com), Primera (www.primera.com), and Casio (www.casio.com) print directly onto the CD or DVD. Cheaper models costing less than $100 often print only text and simple graphics; professional quality models capable of full-color artwork cost more than $1,000, but they make your CDs look just as nice as the ones sold outside of subway stations. Note: If you’re in the market for a new CD drive, Hewlett Packard’s latest CD drives employ LightScribe technology (see page 299) to etch an image onto a CD while it’s still inside the drive.
• Transparencies. Transparencies—transparent plastic sheets that rest on an overhead projector for presentations—thrived at conferences for several decades. Today’s spiffy digital projectors keep pushing overhead projectors further back into the closets, but many people still use them, especially in schools. Inkjet printers easily print text and graphics on the transparent plastic sheets, making them a cheap alternative until your company finally puts that digital projector in the budget. • Greeting cards. Many people now send greeting cards through the Internet, but nothing beats the personal touch of a custom-made, hand-signed greeting card. Greeting card paper comes specially sized on colored paper, complete with fold lines and perforations. Embellish it with your message, add some artwork, and skip that last-minute trip to the greeting card aisle. • Iron-on paper. These let you print your image (a picture of your kid, clever slogans, or team numbers) onto the paper, and then iron it onto fabric or clothing. Peel off the cooled paper to leave a machine-washable image. Be sure to
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
133
Printing Specialized Items
iron it on backwards, though. Applying it wrong side-up gives you a mirror image and a mucked-up iron. Figure 4-10: Top: Avery’s free Avery Wizard software makes quick work of printing labels and cards from within Microsoft Word. Choose the product number of your particular Avery labels from the first menu. Middle: Type the words that you want to appear into the template—perforated business cards, in this case. Bottom: The wizard shows a print preview of your neatly aligned work before sending it to the printer, which prints it onto the cards or labels.
134
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• iPod tattoos. The latest craze, this thin film wraps around your iPod, giving it a new look—faux ostrich skin perhaps—that also protects it from scratches. (Download templates on the Activity Center of Hewlett Packard’s Web site [www.hp.com]).
Printing Digital Photos Professionally
Printing Digital Photos Professionally Those old photos in the shoebox usually look pretty darn good fifty years later, letting you chuckle over your grandparent’s funny clothes. So consider this sobering fact before investing lots of money in photo paper and ink cartridges for your inkjet printer: the vast majority of pictures printed by today’s photo printers fade in less than a decade. If they’re exposed to direct sunlight, these photos may not last more than a few months. Some inkjets use water-soluble ink, which means that handling a photo with wet fingers does it in. The newest generation of inkjet printers, inks, and paper extends a printed photo’s life, but at a cost: these archival printers cost several hundred dollars extra, and require more expensive paper and ink. And the manufacturer’s longevity ratings for those prints applies only to photos kept under glass (or sealed in a protective sleeve), away from sunlight. That’s why more people now turn to professional photo developers, since they accept digital photos as easily as they do traditional film. Better yet, they’ve priced their services so low that, picture for picture, they’re often less expensive than printing at home. Professional photo developers accept digital photos in two ways, described in the next two sections.
In-Store Kiosks Much to the chagrin of the photo-developing industry, the vast majority of digital photos remain unprinted. To recapture that lost market, the big players want to make photo developing as easy as possible—and just as quick as using an inkjet printer. Their solution? The photo kiosks shown in Figure 4-11. Waiting for you in stores nationwide, kiosks print your digital files any way you bring them in, whether on a floppy disk, a CD, or still inside your camera. Although Kodak (www.kodak.com) and Sony (www.sony.com/picturestation) manufacture and sell the kiosks, each kiosk’s owner sets their own costs for printing; prices average from 30 to 60 cents for a 4 × 6 print.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
135
Printing Digital Photos Professionally
Tip: For extra savings, visit the Kodak or Sony Web site before visiting their kiosks. As of this writing, both companies offer print-out discount coupons to present when paying for the photos.
Figure 4-11: Left: Kodak (www.kodak. com) sprinkled more than 30,000 Picture Maker kiosks across the country in camera stores, drug stores, and shopping malls, making them the nation’s biggest player in the digital photo kiosk department. Kodak’s kiosks let you create prints from photos stored on digital camera memory cards, CDs, or floppy disks. The kiosks also accept photos beamed wirelessly from camera phones and PDAs, and they can even scan in existing photos and slides. The touchsensitive screen lets you zoom, crop, remove “redeye,” adjust colors, and add borders before printing. Right: Found in thousands of FedEx Kinko’s locations, Sony’s PictureStation kiosks (www.sony.com/ picturestation) accept digital camera memory cards, CDs, and floppy disks. Their kiosks offer the same zoom, crop, and red-eye repair tools as Kodak.
Photo Printing Web Sites Your grandparents mailed their film rolls to the developer, and then waited for the prints to arrive in the mail. Digital photography resurrected that old business model, but with a twist: you can upload your photos to the developer, either from your PC or camera phone. A few days later, your prints arrive in the mail. (Some sites even let you choose a particular frame; the photo arrives in the frame you chose online.) Some online developers also let you pick up your photos in person
136
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
within a few hours. Online developers don’t offer a kiosk’s immediate gratification, but they’re usually less expensive.
Printing Digital Photos Professionally
Also, uploading from home or work lets you spend more time editing your photos. Cropping a photo may be easier when you use your favorite, familiar image editing program, rather than fiddling with a kiosk’s built-in editing tools while the line behind you grows. Windows XP lets you print photos directly from your My Pictures folder (Figure 4-12) to Web sites offered by Fujifilm, Shutterfly, and Kodak for about 25 cents per 4 × 6 print. Figure 4-12: Top left: To order professional quality prints directly from Windows XP, open your My Pictures folder and then choose “Order prints online.” Top right: Turn on the checkboxes of the pictures you want to print, or choose Select All. Bottom left: Windows XP connects to the Internet and lists available printing companies; select the one you want. Bottom right: Choose the number of prints you want for each size listed. (To compare prices, click the Back button and try the different companies.) To complete your order, choose a pickup location (or enter your address to receive the prints by mail), and then enter your credit card number.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
137
Digital Photos on an Inkjet Printer
Although ordering directly from Windows XP’s My Picture folder may be handy, you can do the same thing from any developer’s Web site, often for a better price. Here are a few major photo developers and their Web sites: • Snapfish (www.snapfish.com) • Wal-Mart (www.walmart.com) • Ritz/Wolf Camera & Image (www.ritzpix.com) Of course, an alternative to printing photos is sharing them online with friends (page 158). NOTE FROM THE LAWYERS
Copyright, Photos, and Your Photo Developer In 1999, the Professional Photographers of America sued Kmart, alleging the store violated federal copyright law by copying photos without the permission of the copyright owners. Kmart settled out of court by paying $100,000. Since then, photo developers and amateur photographers are left with an uncomfortable dilemma: there’s no easy way to tell who holds the copyright on a photo. In the past, amateurs submitted entire rolls of film, complete with the usual blunders of bad lighting and chopped heads. But negatives are a rarity, these days. And amateur digital photographers send in computer-enhanced digital photo files that look fantastic—so good, in fact, that some developers refuse to print them for fear of breaking copyright laws.
To keep from violating copyright law, some photo developers simply guess as to whether you snapped the photo yourself. If your work looks too professional, they may not print it. For instance, Wal-Mart’s Web site warns that it won’t develop “any photograph that appears to have been taken by a professional photographer or studio, even if it isn’t marked with any sort of copyright, unless we’re presented with a signed Copyright Release.” The moral? When submitting digital photos that look pretty darn good, be prepared to cough up your own copyright release form and convince the developer that you snapped those shots yourself. If the developer refuses, you may need to take your printing job elsewhere.
Digital Photos on an Inkjet Printer Printing decent photos on an inkjet printer boils down to three things:selecting the right paper type, choosing your photo’s resolution and size, and adjusting your printer’s settings. Make a mistake on any one of these three tasks, and it’s easy to muck up your photo. Here’s how to make the right choices when it’s time to print out your masterpieces.
Choosing Photo Paper When you want the best photos, buy paper from the same company that made your printer. Manufacturers create their printers, paper, and ink to work as a team. The coating on the paper binds with the ink to keep the colors from blurring. If quality really doesn’t matter—for children’s daily art projects, greeting cards, or refrigerator prints—buy the cheapest stuff you can get (and cheap ink, as well). But if you care about how your photos look, read on. 138
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Tip: Don’t leave photo paper sitting in the printer’s tray; the light and temperature fluctuations dull its look. Instead, store the paper in a cool, dark place and feed it to your printer, sheet by sheet, when needed.
Digital Photos on an Inkjet Printer
Manufacturers describe their photo paper using a wide variety of terms. • Premium. The most expensive option. This paper looks the best, feels the thickest, and lasts the longest. It’s for photos you really care about. To keep fading to a minimum, keep the picture framed under glass. • Glossy. Less expensive than premium paper, glossy photo paper shines like a “real” photograph, making the colors stand out. And, just like real photos, it magnifies fingerprints and reflects sunlight. • Semigloss. Semigloss isn’t quite as heavy or glossy as glossy paper, but it cuts down on the shiny colors for reduced price and better handling. • Matte. Matte paper adds texture to lessen the shine, making it both durable and non-glare. Some people prefer the textured look for portraits. • Plain. Don’t confuse this option with plain paper, which won’t work for photos. Plain photo paper works best for photos that aren’t priceless—when you want to let the kids play with the printer, for instance. Tip: Don’t print on the back of botched photo paper. The paper prints well on one side only—the shiny side. Printing on the other side bleeds the ink together into arty smears. To determine which side is the rear, look for writing on the backside; alternatively, some paper manufacturers put notches on one corner and direct you to insert the paper with the notch facing a certain direction.
Choosing Your Photo’s Size and Resolution The concept can be a bit tricky to understand at first, but the size of your photo onscreen doesn’t translate into its printed size. That’s because your monitor and printer work at different levels of resolution—the number of dots needed to create the image. Since people sit a foot or two from their screens, monitors create images by stringing together about 100 dots per inch—a fairly low resolution. Your eyes blur the dots together to create an even image. Printers require more dots than monitors because people (especially nearsighted ones) hold the paper much closer to their eyes. To fool the eye into seeing smooth, clean prints, most printers need to pack in at least 300 dots per inch—considerably higher resolution. That means your digital photo must be about three times the size of your monitor to print out at your monitor’s size. This isn’t a big problem for digital cameras that use three or more megapixels. Those photos can easily fill a full sheet of paper at full resolution. But smaller photos—or portions of photos—may lack the resolution needed to print at certain
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
139
Digital Photos on an Inkjet Printer
sizes. When printed too large, photos look grainy. Sometimes you can see bunches of dots instead of a smooth image. How do you know what size to choose? Some photo-editing programs (page 155) let you know when you’re trying to print a photo at too large a size. (Some even help you crop photos to a standard photo size.) As a rule of thumb, the more megapixels your digital camera shoots with, the larger sized prints you can make. Table 4-1 offers some guidelines as to how large a print you can make from your particular digital camera. Table 4-1. Choosing the right size for your printed digital photo
Megapixels
4x6
5x7
6x8
8x12
10x15
.5
Good
Low
Low
No
No
.8
Good
Good
Low
No
No
1
Best
Good
Low
No
No
2
Best
Best
Best
Low
No
3
Best
Best
Best
Good
Low
4
Best
Best
Best
Best
Good
5
Best
Best
Best
Best
Best
As shown above, cameras with three or more megapixels can fill a standard-sized piece of paper without much problem. Cameras with four or more megapixels give you the luxury of cropping (page 158)—trimming out all but a photo’s best portion—while still creating a decent-sized print. You’ll see similar charts elsewhere with slightly different numbers. That’s because a lot depends on the quality of your printer and your own definition of quality. The same photo can make professionals shudder and amateurs smile. Tip: To shoot the most detail with your digital camera, browse through its built-in menus and change your detail setting to Fine or Super Fine rather than Normal. The resulting files are larger, but they look better when you print them out.
Adjusting Your Printer Settings Once you decide on your photo’s size and paper type, be sure to tell your printer about your choices. If you skip this vital step, the printer chooses its default settings, which usually means printing your stunning photo onto plain paper at low quality. To see how your photo will appear on paper, choose File ➝ Print Preview, and then adjust the printer’s settings (page 129) to match your chosen paper selection and photo size. When both the preview and settings look correct, click Print to send your photo to the printer.
140
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Remember that sunlight, particularly ultraviolet rays within sunlight, fades photos quickly. For best preservation, request UV protected glass or plexiglass when framing your picture. That filters out the most harmful rays, giving your photos the best chance at long-term survival.
Printing Web Pages
Tip: After printing a photo, let it dry for 10 minutes on a clean flat surface. That gives the inks time to bond with the paper. If you handle it too quickly after printing, a fingerprint could smudge the ink.
Printing Web Pages Some Web pages look awful when printed. The page’s entire right side disappears beyond the edge, for instance, or the bottom half prints on a second page. Or you may just want to print a few paragraphs, but all the graphics, ads, and borders that come along for the ride drain your inkjet’s nozzles dry. Sometimes a simple border fits the entire first page, leaving the text to run down the second page. These Web pages don’t print well because the Web site’s creators don’t really care about your printing problem. They have enough trouble making sure the page looks good on different-sized monitors and different types of computers using different operating systems and different Web browsers. To see how a page will look when liberated from the screen, choose File ➝ Print Preview from your browser. If you’re lucky, and it looks perfect, click the Print button to send the page or pages to the printer. If the Web site doesn’t cooperate, try these tricks. • Printer format. A few Web designers feel your pain, so they design special versions of their Web pages that look nice on standard-sized sheets of paper. Look for the words “Text Only” or “Print Format”—usually near the page’s top, right corner. • Print only the part you want. Highlight the section you’re after—the text of a news article without all the surrounding ads, for example—and then choose File ➝ Print. When the Print dialog box appears, choose Selection from the Page Range section. • Print only the page you want. Some long Web pages extend six printed pages or more, but in many cases you want only one page—page three, for instance. To print only that page, choose File ➝ Print Preview. When your browser shows you how the site looks on paper, click the Page arrows along the top until you find the page with your coveted information. Then print only that page using your printer’s Page Range setting (page 130). • Print in Landscape format. When printed, the right edge of some Web pages disappears off the paper’s edge. To give the page more space, tell your printer to print in Landscape (horizontal) mode rather than in the vertical-oriented Portrait mode.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
141
Printer Troubleshooting
• Don’t print the background. Some Web sites spruce up their pages with a patterned background. That golf course’s Web site may look nice in Burberry, but printing those colors sucks your ink cartridges dry. Turn off backgrounds in Internet Explorer by choosing Tools ➝ Options ➝ Advanced. Scroll down to the Printing section, and turn off the “Print Background Colors and Images” checkbox. (In Firefox, choose File ➝ Page Setup ➝ Print backgrounds.) • Reformat in a word processor. From your browser, choose Edit ➝ Select All ➝ Edit ➝ Copy to copy the entire Web page to Windows’ clipboard. Open a fullfeatured word processor like Microsoft Word and then choose Edit ➝ Paste. The Web page turns into a convoluted jumble of tables, ready for you to pick apart. Use this labor-intensive procedure as a last resort. Internet Explorer’s Print menu (File ➝ Print) offers an Options tab, letting you print frames—large banners of stationary menus or ads that cling to the site’s top or side as you move between pages. Few sites use frames these days, so this option doesn’t mean much. To select a particular frame for printing, hold down Ctrl and press Tab. When you’re inside the desired frame, choose File ➝ Print ➝ Options tab to send the page to the printer. If Ctrl+Tab merely jumps between the Web site’s address and the page itself, the site doesn’t use frames.
Printer Troubleshooting When something’s wrong with your printer, start running down the following list of fixes.
Paper Jams Most paper jams start right in the printer’s paper tray, so start your examination there. • Are you feeding the printer thicker paper than normal? If you recently switched to new paper, check your printer’s manual or drop by its manufacturer’s Web site to see if it can handle this new stock—some printers choke on anything thicker than office paper. • Feel the adjustable paper tray levers to make sure they’re not holding the paper too tightly—or not tightly enough. The paper should pull through easily, but not so easily that it slides in at an angle. • Grab the paper stack with both hands and flex it up and down before placing it in the tray. That loosens the sheets, letting air move between them, and releases any static electricity that could cause pages to cling. • Don’t fill the tray with more paper than the printer can handle. Try about 20 sheets, decreasing or increasing the number until you’re sure your printer handles the stack well.
142
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• If the paper’s still jamming, try feeding the paper one sheet at a time—the problem may be with the rollers, the rubbery “rolling pins” that push your paper through the printer. Remove the printer’s lid and use a credit card or cotton ball soaked in alcohol to scrape off any gunk from the rollers.
Printer Troubleshooting
• Is the paper slightly damp or moist? Be sure to seal unused paper in an airtight bag if you live in a damp environment.
Replacing Inkjet Cartridges When your inkjet printer’s cartridges begin to run low, your printer always tells you about it. Some flash lights, others send an alert to your screen, and others simply refuse to work until you fork out the money for the replacement. Since printer companies make so much money from cartridges, they go out of their way to make them as easy as possible to buy and replace. Don’t bother searching for a manual for instructions, just lift the lid of your printer; many printers include a well-placed sticker pointing out the cartridges’ location, model numbers, and step-by-step instructions for inserting the replacements. Although instructions vary between printer manufacturers and models, here’s the basic procedure. 1. Find some plastic baggies in which to dispose the old cartridges. Sometimes old cartridges leak ink. Keep a plastic sandwich bag or two on hand for quick disposal. 2. Lift the printer’s lid. Most lift along the front, like the hood of a car. 3. If necessary, push a button to slide the cartridges into view. Sometimes lifting the lid exposes the cartridges; if not, push the button revealed by the lid. The cartridges slide out of their hiding place and into view. (You may need to turn on your printer before the button works.) You should spot two or more cartridges: a small black one, and a thicker color one, and sometimes separate cartridges for each color. 4. Remove the old cartridges from the printer. Look for a little latch holding each cartridges in place, as shown in Figure 4-13. Release the latch, and the cartridge should pop up a bit. Grab the cartridge and lift it up and out of its chamber; then drop each one into the plastic bag.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
143
Printer Troubleshooting
5. Remove the new ink cartridges from their wrappers. You may need to pull a little tape seal off the cartridges’ nozzles. Figure 4-13: Inkjet cartridges are easy to replace. Top left: Lift the lid to your printer and then unclasp the lever holding your cartridge in place. Top right: Lift the cartridge’s lever. Bottom left: After lifting the lever, grasp the cartridge and pull it up and out. Bottom right: Insert the new cartridge in the empty space; be sure to push down the lever to lock the new cartridge in place.
6. Install the cartridges into the printer. The black cartridge fits into a smaller chamber than the color one, keeping you from mixing them up. Once they’re in their chambers, fasten their latches to hold them in place. Push the same button that exposed the cartridges or close the lid to make the cartridges retreat to their hiding place. The printer grunts and groans a bit as it tests the nozzles. After a minute or two, the printer should be ready to begin printing again.
Replacing Toner Cartridges A laser printer’s toner cartridge lasts a long time, often printing more than a thousand pages before starting to lose steam. When they begin to fade, the results are 144
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
quickly visible: the pages become lighter and lighter, giving you a heads up that it’s time to replace the cartridge. It’s an easy task that works something like this.
Printer Troubleshooting
1. Turn on the printer. 2. Open the printer. If you don’t spot the toner cartridge, look for a button to push to bring it into view. 3. Pull out the existing toner cartridge. Most pull straight out. 4. Take a new cartridge out of its box, read its instructions, and insert it into the printer. Most toner cartridges come wrapped in an airtight package. Remove the packaging and pull out a plastic tab that seals the toner in place. Gently shake the toner cartridge to distribute its toner evenly, and then slide it into the printer. Don’t force it; it should slide evenly with a small push to lock it in place. FREQUENTLY ASKED QUESTION
Refilling Ink Cartridges My family goes through a lot of inkjet cartridges, and they’re costing us an arm and a leg. I’ve seen lots of Web sites selling refill kits. Are refilled cartridges okay to use with my printer? Some people convert their cars to run recycled oil from deep fryers in fast food restaurants. Sure, it’s a chore, but what a savings! Plus, it’s good for the environment, and it saves money. The same holds true for ink cartridges. Refilling them is a messy business, in which you slowly inject ink with a syringe directly into the cartridge, being careful not to ruin it by adding any bubbles or aiming at the wrong spot. Refilled cartridges certainly aren’t the best bet for people who need consistent, professional quality results. The ink
sold by third-parties doesn’t always match the ink in the originals, leading to slight color variations and rapid fading. But if you don’t always need the best quality—you just want the kids to be able to print out some day projects, for instance—cheap refill cartridges may keep you from cringing when the kids turn on the printer. Plenty of Web sites offer refill kits, tips on refilling, and even prefilled cartridges. Some printer models are a snap to refill; others require elaborate tricks, like running programs to disable a printer’s built-in sensors that prevent refilling. Only you can balance your desire for cheap ink with your need for consistent printouts. If you decide to buy new cartridges, some office supply stores and computer stores will recycle your old ones when you drop them off.
Tip: Some new laser printer models count the number of pages they’ve printed; when they reach a preset limit, they flash a light saying the cartridge needs replacing. If the printed pages still look good, you can squeeze more life out of the cartridge by removing it and then sliding it right back in. When the cartridge is really dead, replace it with a new one.
Chapter 4: Printers PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
145
Printer Troubleshooting
Cleaning Inkjet Nozzles Streak marks on your pages mean your printer’s nozzles need cleaning of the goo that’s rubbing against the page. Remove one or both of the cartridges and wipe their nozzles (found on the bottom) with a soft, lint-free cloth (a word translating to “tissue” in most households). Some printers offer a special “nozzle cleaning” procedure in their Properties menu (Start ➝ Control Panel ➝ Printers and Faxes; right-click your printer’s icon and then choose Properties). The cartridge blasts ink through the nozzle in an attempt to free the streaking culprit. Unfortunately, nozzle cleaning uses up lots of ink in the process.
Other Options If none of the previous tactics solve your problems, you have three options: take your printer in for repair, buy a new one, or fix it yourself. • Repair. Your printer’s work environment consists of paper, ink, and dust, leading to constant problems with dirt. Many shops can fix a problem by simply cleaning the printer. Ask for an estimate first, and compare it with the cost of a new printer. • Buy new. Since manufacturers make money from cartridges, and not printers, most new printers sell very inexpensively. The technology improves rapidly; color laser printers will soon sell for as much as inkjet printers. Depending on the cost of repair, it may be time for an upgrade. • Fix it yourself. Since most problems are caused by cleaning issues, you can try cleaning your printer yourself. When looking for tips on repairing your particular printer model—physically taking it apart—check out Sam’s Laser FAQ (www.repairfaq.org/sam). Samuel M. Goldwasser compiled a list of Frequently Asked Questions, organized by specific printer models, for repair technicians to share. Although laser printer repair consumes the bulk of Mr. Goldwasser’s site, inkjet printers receive plenty of coverage, as well. The Fix Your Own Printers Web site (www.fixyourownprinter.com) offers downloadable manuals and guides for most printers, as well as error code charts, cleaning products, and a forum for owners to share problems. Finally, Compass Micro, Inc. (www.compassmicro.com) sells parts online for Epson and Canon printers. Once you buy a part, the site also grants you access to its extensive library of closeup diagrams for Epson and Canon printers, helping you figure out where that leftover part really belongs.
146
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
chapter
Chapter 5
5
Digital Cameras, Camcorders, and Webcams
Before Windows XP’s arrival, nobody but hard-core geeks enjoyed connecting digital cameras or video cameras to their PCs. The cameras came packaged with clumsy software, often thrown in as an afterthought. And most older PCs just couldn’t handle video’s obsessive, 15-pictures-per-second demands for attention. With Windows XP at the helm, today’s fast PCs work almost seamlessly with digital picture and video gear. Microsoft realized both these technologies were moving from geek to consumer, so they built Windows XP to recognize most digital cameras and camcorders as soon as you plug them into your PC. This chapter explains how to perform the following tasks on your PC: • Copy a digital camera’s photos onto your computer, where you can view and edit them. • Copy a flash card’s photos directly onto your computer, bypassing the camera’s cable to speed up transfers. • View photos on your computer, rotating or editing them, if necessary. • Email photos to friends, letting them see how they really behaved at last night’s party. • Share photos with friends by posting the pictures to a Web site. • Copy movie footage from your camcorder to your PC for viewing. • Edit camcorder footage into a complete movie. • Connect a Webcam to your PC for video chats or to enhance your Web site.
147
PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Digital Camera Basics
Digital Camera Basics Digital cameras first outsold film cameras in 2003; now they’ve nearly pushed film cameras off the shelves entirely. Some people fondly recall pawing through the little envelopes at the developer; others recall the agony of being limited to only 24 shots during an entire day at Disneyland. Digital photos break both those barriers, freeing their owners to snap more pet pictures than ever, and view them instantly. The following sections explain how to move those photos off your camera and into your PC, be it through a cable or card reader. You can then edit them into shape and share them with friends via email or a photo-sharing Web site.
Moving Pictures from Camera to Computer Don’t bother installing the software packaged with your digital camera; it’s generally of mediocre quality, and you don’t need it to see your photos. But do hang onto that little cable that comes with your camera. That’s the tube for pouring your photos from your camera into your PC. Connect the cable between them, and Windows XP automatically welcomes your digital camera and shuttles your photos into your new digital shoebox: your PC’s My Pictures folder. Follow these steps to move the photos out of your camera and into your PC. Tip: Lost your camera’s connection cable? Most cameras use standard USB cables, available at any camera or computer store. Bring your camera when cable shopping; the camera may use any one of three different USB ports (page 34). For even faster photo transfers, buy a card reader instead; card readers are covered in the next section (page 152).
1. Connect the smaller connector on your camera’s cable to your camera and turn on your camera. Find a tiny port on your camera. Sometimes named “Digital” or “USB,” it’s occasionally hidden underneath a little cover, and it’s usually near the port that connects your camera to the TV for viewing photos. Plug the cable’s small end into your camera’s port. With some cameras, you need to set them to View or Cable Connection mode before they’ll start talking to your PC. Note: Some really old digital cameras connect through the serial port (page 46). These oldsters force you to wade through their own, original software. If this program somehow slipped from your grasp, visit the downloads area of the manufacturer’s Web site. Sometimes a special Archive area still offers original software for obsolete electronics.
148
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
2. Plug the cable’s larger, rectangular end into your PC’s USB port. USB ports sprout from all but the oldest PCs (see page 36 for a quick visual reminder). Start looking for the little rectangular port on the case’s front, and then move to the backside of your PC if there’s nothing on the front. For added convenience, some keyboards and monitors offer little ports along their sides. Windows XP recognizes your camera and displays a brief “New Hardware Found” message in the lower-right corner of your screen.
Moving Pictures from Camera to Computer
3. Choose a program to move your photos onto your computer, and then click OK. Windows lists your PC’s photo editing software and lets you choose your favorite to handle the incoming photos (see Figure 5-1). Select one, and Windows assigns it the job of transferring your photos. If your PC doesn’t have any photo-editing software, Windows XP’s built-in Scanner and Camera Wizard automatically steps in to handle the job. Figure 5-1: Once you connect your camera to your PC, Windows XP lists all the software on your PC that can talk to cameras. To skip this menu in the future, turn on the checkbox marked “Always use this program for this action.” Then choose the program Windows XP should automatically summon the next time you plug in your camera.
4. Start the Scanner and Camera Wizard. Windows XP’s friendly wizard pops up with a greeting, ready to handle your photo-moving chores, step by step. Tip: If you’re already a whiz at moving files, dump the wizard. When the wizard opens, click Cancel and the wizard disappears. Then navigate directly to your camera (My Computer ➝ [Your camera’s name]), where you can drag, cut, or copy your files to other folders on your hard drive. This trick comes in especially handy when your camera holds several separate photo sessions, and you’d rather sort them into separate folders for each session.
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
149
Moving Pictures from Camera to Computer
5. Choose the photos you want to copy to your PC. The wizard shows you a contact sheet of your camera’s photos (Figure 5-2); each photo has a checkmark in its upper-right corner. Click Next to move them all onto your PC. On the rare occasion you want to keep some photos on your camera—perhaps you want to move those to a different computer—remove the checkmarks from those photos. TROUBLESHOOTING MOMENT
When the Wizard Is Missing If the wizard doesn’t materialize when you plug in your camera, tighten the cables and make sure the camera’s turned on. Also, some cameras don’t attract the wizard until you flip their switch from Shoot Pictures to Review Pictures mode. If the wizard still hides, run down the following list. • Reactivate the USB port. Unplug the camera’s cord, wait 10 seconds, and plug it in again. That gives Windows XP another chance to recognize your camera at the USB port (page 34). • Check My Computer. See if the camera’s already waiting for you in My Computer (Start ➝ My Computer). The camera may appear as an icon nestled among the hard drives. If you spot it, double-click the icon to see a folder featuring all your camera’s pictures. You can then drag or copy the images into your PC’s My Pictures folder. • Install the camera’s drivers. Sometimes installing the camera’s drivers (the utility program that lets your PC talk to your camera) adds support
for Microsoft XP’s WIA (Windows Image Acquisition) system. WIA lets Windows XP recognize your camera when you plug it in. • Install the camera’s software. Installing the digital camera’s software—but not actually using it— sometimes installs WIA, letting Windows XP finally recognize the camera and grab its photos. • Give up and use the camera’s software. This isn’t the best option, as it bypasses Windows XP’s built-in transfer system, but it works in a pinch. • Buy a flash card reader. To upgrade to faster photo transfers, buy a flash card reader (page 152) for your PC. Available for less than $25, these handy gadgets add “mini-drives” that let you slip in your camera’s flash card just like slipping in a CD. When Windows XP recognizes the files, drag and drop them to an appropriate folder inside your My Pictures folder.
6. Choose a descriptive name for the photos and select a folder to store them in. The name DSC03612.JPG doesn’t help much when searching for your carnivorous plant photos next month. To help you relocate your pix, type a descriptive name in this dialog box (Figure 5-3), like “Venus Flytraps.” Windows creates a folder with that name inside your My Pictures folder, tosses your photos into the folder, and renames each photo in sequence: Venus Flytraps001, Venus Flytraps002, and so on. Click Next.
150
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
7. Choose “Nothing. I’m finished working with these pictures” to exit the wizard. Although Windows XP offers three choices here, opt for the third choice— Nothing—because the other two are so abysmal:
Moving Pictures from Camera to Computer
Figure 5-2: Click Next to move all your photos off your camera quickly, freeing up room to take more shots. Don’t stop here and rotate your photos to “right side up.” The rotate feature works more quickly if you wait for the pictures to move onto your hard drive.
Figure 5-3: Windows XP creates a folder with the name you entered here, and then renames all the photos in sequence with that name, making it easy for you to find photos later. Be sure to turn on the “Delete pictures from my device after copying them” checkbox. Otherwise, Windows XP copies, rather than moves the camera’s photos, leaving them to hog precious storage space.
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
151
Moving Pictures from a Card Reader to a PC
• Publish photos to a Web site. This offer certainly sounds gracious, but the wizard isn’t offering to publish your photos to your blog, your own Web site, or even your choice of photo-sharing sites (page 160). This option simply sends your photos to Microsoft’s own MSN Groups—if you have an existing account or want to set one up. Competing sites (which you can learn about in the online appendix, “Other Cool Things You Can Do Online,” available on the “Missing CD” page at www.missingmanuals.com) allow more free photo storage space, easier photo transfers, and simpler menus. • Order Prints. This emails your photos to an online photo developer, which mails back your prints less than a week later. It’s convenient, but certainly not the fastest, best, or cheapest way to print photos (page 135 shows you some better options). • Nothing. The Wizard vanishes, but not before opening your newly created folder where you can ogle your new photos.
Moving Pictures from a Card Reader to a PC The Scanner and Camera Wizard leads you steadily through the camera-to-PC photo transfers, but all that hand-holding takes time. For quicker grabs, connect your camera to your PC as described above and then choose Start ➝ My Computer. Look for your digital camera’s icon nestled among your PC’s disks and drives. Double-click the camera icon to open it, like any folder. Select the camera’s photos and drag them to your My Pictures folder. Although that method speeds things up by bypassing the wizard, bypassing your camera’s cable altogether speeds up transfers even more. For the speediest transfers, buy a card reader, like the one shown in Figure 5-4. Available for around $20, the card reader plugs into your PC’s USB port and creates tiny disk drives for inserting your camera’s cards. Push your camera’s card into the reader and use Windows XP’s standard copy tools to move the photos to any other folder on your computer. Card readers hold several advantages over the wizard: • Battery life. With a card reader, your camera stays turned off during transfer sessions, keeping your battery alive longer for more picture taking. • Speed. Card readers give your PC direct access to the card, and they’re built for speed. Camera transfer circuitry isn’t nearly as quick. • Price. Card readers cost less than 20 dollars, usually much less than the cost of replacing the camera cable you left in the hotel room.
152
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
• Versatility. Most card readers read every card format, including cards used by your friends, relatives, and strangers at coffee shops. (They’ll also work with your next camera, as well.)
Viewing and Editing Photos
Figure 5-4: Top: Card readers provide a handy alternative to replacing a camera’s lost cable. They also work up to 40 times faster than some cables, particularly those from older cameras. Card readers come with tiny drives that accept storage cards from your camera, cell phone, PDA, and other gadgets. Plug a USB 2-capable card reader into your PC’s USB 2.0 port for the fastest transfers. Bottom: When plugged in, a card reader adds several Removable Disk drive icons to My Computer, letting you insert a wide variety of card types. Unfortunately, the drives in My Computer rarely identify which removable drive contains your newly inserted card, forcing you to doubleclick them all until the correct one opens (you’ll know you’ve hit pay dirt when you see your images inside the drive).
Viewing and Editing Photos Once you move your photos from your camera onto your PC, Windows lets you play with them in several ways without adding smudges or finger prints. Windows
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
153
Viewing and Editing Photos
XP’s built-in photo management tools handle a few minimal chores, but you need third-party programs to handle the rest. Here’s how to view, locate, rotate, edit, and share photos with your friends. Chapter 4 explains how to print digital photos (page 135). POWER USERS’ CLINIC
Forensic Photo Sleuthing with EXIF When guessing your age in your baby pictures, you probably glance at the photo developer’s date stamp along the photo’s side or bottom edge. That, and perhaps a jotted note, provide your only clues.
XP’s built-in tools to rotate or edit your photos. Instead, use only digital-editing software that supports EXIF like the free Picasa 2 (www.picasa.com), Adobe Photoshop Elements (www.adobe.com), or others.
The dating game will be much easier for your kids and grandkids, though: your digital camera stamps every photo with the date and time you snapped it. It also throws in your camera’s shutter speed, lens aperture, focal length, exposure time, flash, and much more. A few advanced digital cameras even stamp GPS (Global Positioning System) information on a photo, letting you pinpoint where you stood when taking the snap. To view a photo’s EXIF info, right-click the photo, choose Properties, and then click the Summary tab.
Until you pick up a good photo editor, copy your original photo files to CDs as soon as you transfer them onto your PC, and then store them in a safe place. If you have to make any changes using Windows XP, edit only the copies.
Although casual viewers appreciate the date stamps, EXIF (Exchangeable Image File Format) information offers other benefits: • Education. Examining the EXIF settings of your favorite shots helps you become a better photographer, letting you see how variations in exposure, flash usage, and depth-of-field affect your photos. • Better prints. Some photo printers examine the EXIF data and adjust the tonal values to enhance prints automatically. • Editing. Some photo-editing software reads EXIF data to enhance images. Although EXIF data proves quite useful, many older photo editors ignorantly erase it as soon as you start editing. Windows XP is no exception, often wiping out this valuable data when you rotate a photo. The cure? Avoid using Windows
154
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Viewing Photos Windows XP’s My Picture folder (Start ➝ My Pictures) displays your photos three different ways, each one designed to help you sort through a pile of photos, narrow down your search to a specific folder, or display the photo on your monitor.
Viewing and Editing Photos
• Thumbnail. When searching all the photos and folders in your My Pictures folder, turn on Thumbnail view (View ➝ Thumbnail), shown in Figure 5-5, top. To help you see each file and folder’s contents, each photo’s icon morphs into a miniaturized photo; each folder’s icon shows tiny views of the first four photos inside. • Filmstrip. For searching photos within a single folder, turn on that folder’s Filmstrip view (View ➝ Filmstrip). Windows XP lines the window’s bottom with a row of thumbnails (Figure 5-5, middle), and then displays the currently selected photo along the top. • Viewer. When you find the photo you want, confirm your suspicions by giving its thumbnail a double-click. Windows XP’s Picture and Fax viewer (Figure 5-5, bottom) hops to life, resizing your photo to fit the size of your current window. (Enlarge or resize the viewer like any other window in Windows XP.) In addition to letting you create a full-screen slideshow of every picture in a folder, Windows Picture and Fax Viewer comes in handiest when you need to whip through every photo in a hurry. To advance from one photo to the next, click the two blue left-and-right pointing arrows at the bottom of the viewer. Tip: The prospect of free snaps turn digital cameras into massive photo generators. Reduce clutter by immediately deleting the blurred and blechie ones with a click of the viewer’s red X button. The fewer photos you keep, the easier it is to manage the good ones. WORKAROUND WORKSHOP
Rotating Made Right Although Windows XP’s rotate feature proves quite handy for righting obvious wrongs, the tool makes professional photographers cringe. First, Windows XP’s rotation tampers with the camera’s settings information—its EXIF data (page 154)—stored inside your photo. Second, rotating photos slightly degrades their quality, although most eyes never
notice the difference. If you care about these things, burn copies of your camera’s photos to a CD (page 292) as soon as you remove them from your camera. Then keep copies on your hard drive, where accidents and edits won’t really matter.
Rotating and Editing Photos When your snapshots show people walking on walls, let Windows XP’s rotate feature set them gently back on earth. Right-click the incorrectly rotated photo, and then choose Clockwise or Counter Clockwise. Windows XP lets you access the rotate feature wherever you spot a turned photo, be it in thumbnail view, filmstrip
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
155
Viewing and Editing Photos
view, or even within the Windows Picture and Fax Viewer (all shown in Figure 5-5). Figure 5-5: Top: Rather than using the Windows standard 4-photo grid, you can assign a single photo to represent what’s inside a folder: Right-click the folder and choose Properties ➝ Customize ➝ Choose Picture. Double-click a favorite photo for Windows to stick on your folder. Middle: Move back and forth quickly between photos by clicking the little round blue arrows (circled). You can use the adjacent two buttons to rotate pictures either clockwise or counterclockwise. Bottom: Double-click any photo to see it in Windows Picture and Fax Viewer. To start a full-screen slideshow of the photos inside that picture’s folder, press F11. (Press Esc to stop the show.) The buttons along the bottom reveal their purposes when you hover your mouse pointer over them.
156
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
When it comes to editing photos, though, don’t look within Windows XP’s builtin tools. Windows XP offers nothing for fixing photos, changing their lighting, or even removing red-eye. Click the Editing button in Windows Picture and Fax Viewer, for instance, and Windows XP simply hauls out Paint—a decades-old drawing program for creating colored lines and circles.
Viewing and Editing Photos
To its credit, Windows XP resizes photos for emailing (page 158), but when you need more than that, pick up a free copy of Picasa 2 (www.picasa.com). The program offers basic fixes (Figure 5-6) like cropping photos to standard print sizes, straightening slanted horizons, removing red-eye, and automatically adjusting contrast and color.
2. Slide lever until straight
3. Click Apply to save straightened photo
Figure 5-6: Picasa, a free photoediting program distributed by Google, offers a wide variety of easy-to-use, one-button editing tools. When stuck with a slanting horizon, for instance, click the Straighten button, and then slide the lever to the left or right until the horizon becomes horizontal. Click the Apply button to save your changes.
1. Click straighten
Automatically enhance your photo’s contrast, lighting, and color by clicking the program’s I’m Feeling Lucky button. (If that phrase rings a bell from Google’s search menu, that’s because Google owns Picasa.) Picasa’s robotic eye ain’t perfect, but it’s a great starting point for further tweaks. Picasa’s photo management tools outshine Windows XP as well, letting you view your photos in a linear “timeline” of thumbnails. If you recall the general day, month, or year you snapped a missing photo, call up the Timeline and watch your photos “float” past in the order you took them.
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
157
Sharing Photos with Friends
If you need more advanced editing than Picasa offers, check your digital camera’s box and packaging. Most manufacturers slip in a software CD or two, and you occasionally find Photoshop Elements, an easier-to-use version of Adobe’s Photoshop program for professional photographers. Although more difficult to figure out and use than Picasa, Elements’ advanced tools let you remove dust and scratches from scanned photos, merge photos to create panoramas, and airbrush away wrinkles, moles, and that little smear of BBQ sauce from your right cheek. Note: If you decide to invest in Photoshop Elements, check out Photoshop Elements 4: The Missing Manual for full coverage of how that program works.
Sharing Photos with Friends To go retro when sharing photos, just print them out (page 135) and pass them around in person. But digital photos cry out for a more immediate approach. Here’s how to share them through email or a file-sharing site.
Sending Photos Through Email Sending photos through email is like dropping a block of ice into a drinking glass: the photos’ immense size keeps them from fitting comfortably into an email message, which works best with text and small attachments. You may not have noticed your digital photos’ mammoth size because Windows XP hides it from you. To keep you from examining nose pores instead of portraits, Windows XP politely shrinks opened photos to make them suitable for onscreen viewing. For instance, Figure 5-7, top, shows a digital photo opened with Windows Picture and Fax Viewer—note the tiny fly on the railing. When viewed at actual size (see Figure 5-7, bottom), that tiny fly’s really a monster. Large digital photos (usually around 1 or 2 MB apiece) make for great prints but lousy email attachments. Even if your ISP lets you send the photo (and many won’t, because of size restrictions), the photo would probably bounce back when it overflowed your friend’s mail storage limit (usually 5 or 10 MB). The only answer is to shrink the photo, leaving you two options: • Resize. Windows shrinks your photos automatically if you email them. Rightclick a selected photo or photos and choose Send To ➝ Mail Recipient. When you take up Windows’ offer to “Make all my pictures smaller,” Windows shrinks them to 640 × 480 pixels—a comfortable viewing size for most displays. (If the recipient owns an extra large monitor, click “Show more options” and choose either 800 × 600 pixels or 1024 × 768 pixels.) • Crop. Resizing a photo doesn’t work well for shots where you need to preserve details. Those three cute deer grazing in the field, for instance, become three small brown dots in a sea of green. Cropping lets you trim away most of the
158
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
field, yet save the deer at actual size. Windows XP doesn’t offer any cropping tools, but Picasa crops very easily, as shown in Figure 5-8.
Sharing Photos with Friends
Figure 5-7: Top: Windows XP automatically shrinks digital photos to fit into the Windows Picture and Fax Viewer. To see your photo’s true size, click the Actual Size button— the fourth button from the bottom left. Bottom: When Windows displays the actual-sized photo, most of it hangs beyond the window’s borders, leaving just a tiny portion visible. (To shrink the entire photo back into the window, click the Best Fit button— the third button over from the bottom left.) Although Windows XP lets you see portions of photos at their actual size, it doesn’t provide a way to save that portion separately from the photo. For that, you need photoediting software with a cropping feature (Figure 5-8).
When emailing photos, never dump a huge batch into email and mass-mail. No matter how great a time you had in Belize, few friends want to wade through a wad of vacation photos. Instead, choose a favorite or two to sum up the experience, and Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
159
Sharing Photos with Friends
send those. Snap-happy people occasionally end up on “twit filters” (page 374), especially when they send photos to friends at work. For better etiquette, upload your photos to a photo-sharing site and send your friends the link to view your masterpieces on their own time. Figure 5-8: Top: Like Windows, Picasa can resize a photo for sending through email. But in this case, resizing the entire photo shrinks the deer into little specks, which makes for a pretty boring photo. Bottom: Unlike Windows, Picasa offers a crop tool, letting you place a resizable rectangle around the most important portion of your photo—then save just that portion. By cropping out all of the photo except for the deer, for instance, this photo becomes small enough to send through email, yet still shows the portion that matters: those cute deer and their big ears.
Posting Photos on a Sharing Site Instead of emailing digital photos to a few select friends, some folks share their pet, party, and parade photos with the world. Photo-sharing sites give you an easy-to160
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
use Web page to display your photos, whether sent from a computer or a camera phone. Send friends the link, and they can drop by to see your photos in a slide show, complete with your captions or annotations.
Sharing Photos with Friends
Here are some of the most popular. Flickr Six hundred thousand people worldwide dump their photos at Flickr (www.flickr. com), but the site’s much more than an online picture frame. Sure, Flickr offers the usual photo-sharing tools: send friends a link to your Flickr “photostream” for browsing or viewing in a slide show. Flickr even lets you annotate parts of photos, showing friends exactly where in the river that big lunker took the lure yesterday. But Flickr takes sharing to the extreme, making it easy for not only you, but also the entire world, to retrieve your photos. It shares photos through the use of tags— simple, descriptive words like “Large Green Beetle Costa Rica” that you append to your uploaded photos. Your tagged photos become part of the collective photographic consciousness, letting you and Costa Rican entomologists and bug fetishists worldwide locate your photos quickly and easily. Should you choose, your photos can remain hidden to all but selected friends. But most uploaders enjoy Flickr’s groupthink spirit, granting strangers access to almost everything. Visitors can view where you caught your bass, and leave a comment pointing out where they got lucky. Of course, visitors could just as easily leave a note saying, “You stink,” revealing a potential problem: Flickr’s open philosophy could easily sink into a pit of spam and crude vandalism. But so far, it’s grown quickly into an easily searchable, eight-million-photo library that’s much more than the sum of its parts. Free account holders may upload up to 20 MB of photos (roughly 20 to 100 photos, depending on their size) every month. Professional account members ($24.95 a year) may upload 2 GB (10 times as many photos) each month, send larger sized photos, and enjoy other privileges. Flickr’s partnership with Qoop (www.qoop.com) allows members to print bound books of their photos starting at $8.95 or print a poster for $9.99. Calendars, postcards, coffee mugs, and single prints are also available. Kodak EasyShare Gallery Whereas Flickr lets anybody with a camera walk in the door, Kodak’s EasyShare Gallery (www.kodakgallery.com) prefers privacy. Drop-by visitors must create an account before viewing any photos. The online site brims with more than 20 million members and one billion photos, partly from Kodak’s 2001 purchase of Ofoto, a popular online photo-sharing site. Renamed to Kodak EasyShare Gallery in mid-2005, the site also collects visitors
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
161
Troubleshooting Digital Cameras
straight from Windows XP: your My Pictures folder shuttles you to Kodak’s site, among others, when you click the “Order Photos Online” link (page 152). Like most online photo-sharing sites, the EasyShare Gallery lets you store, view, and share photos with specified friends and family. But it’s no secret that Kodak caters primarily to people who want to print digital photos on Kodak paper. (Or on Kodak’s line of calendars, cards, mugs, mouse pads, aprons, frames, and other swag.) In addition to printing photos, the site offers simple online editing tools for removing red-eye, cropping and rotating, and adjusting color. Toss on a few borders and effects, send your work to Kodak, and wait a few days for your prints to arrive in the mail. Fotolog Fotolog (www.fotolog.com) bills itself as a photo blog—a sort of online diary based on images, rather than words. To reduce the deluge of photos, members may upload only a single photo each day. As the Web site puts it, “Fotolog is more the kind of place where you’d put up a different photo of your children each day or each week so your friends and family could check in to see how they’re growing up.” Even with a limit of one photo per day, the site boasts more than a million “Fotologgers,” who’ve swollen the database to more than 44 million photos. The site doesn’t offer searches, so you need the account holder’s name to ferret out their photos from the jumble. Fotolog offers neither printing services nor professional accounts. So, how does it pay the bills? Three hobbyists run Fotolog, and request donations of $5 a month to help pay their bills.
Troubleshooting Digital Cameras When your digital camera’s not working properly, make sure the batteries are charged and a digital card’s in the camera’s memory slot. Once you’ve ruled out those two main culprits, move on to these: • Small or lower quality photos. Most cameras offer three or four quality settings, giving owners a choice between fewer, better-quality photos or packing more, lower-quality photos onto the storage card. Lower settings create smaller pictures, lower quality, or both. To increase a photo’s size and/or quality, poke through your camera’s menus and bump the quality to Fine or Best. Then buy a larger memory card, pronto. • Battery life. When your camera battery’s fading fast, and you want to take some more snaps before heading back to the recharger in the hotel room, turn off the camera’s LCD display while taking your photos. In fact, some people double their battery life by never using the LCD display. After all, the lowly viewfinder worked fine for previous generations of photographers. Plus, you can always crop your photos (page 158) for that perfect frame when it’s on your computer.
162
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Tip: When buying a new digital camera, always buy a second battery, too. That battery stays in your camera while the other one’s recharging, letting you shoot photos for twice as long.
Troubleshooting Digital Cameras
BUYERS’ GUIDE
Choosing a Digital Camera Today, advertisers, retailers, and your neighbor Fred all tout cameras by their megapixel rating—the number of dots (pixels) the camera creates when taking a picture. The ads rarely tout statistics on lenses, durability, or clarity of focus. The term megapixels, it seems, means everything. Or does it? More pixels means larger files translating to larger, more expensive memory cards to hold those whopping images— and a chunky hard drive to hold them all, as well. Although they can drain an owner’s pocketbook, cameras with more megapixels hold three advantages over their cousins with fewer megapixels. First, all those dots let you create some mighty large prints—if you ever need a poster of Cynthia holding the garden snail, you’re safe. But perhaps more important than print size, large megapixel images increase your chances of better photos. Hauling in that huge canvas of dots lets you crop (page 158) out
the snail, should you wish, and still end up with a fantastic picture of Cynthia. Low-megapixel cameras rob you of that chance. Finally, mega-megapixel cameras let you document that special moment in the best technological method currently possible. A 2-megapixel image will look pretty grainy on tomorrow’s TV sets. But a 6-megapixel photo stands a better chance of looking better for a few more years. While megapixels definitely matter when choosing a camera, they’re not the only thing that determines picture quality or the camera’s ease of use. Before buying that sexy new camera on impulse, compare reviews of cameras—and view the images they’ve taken—at Steve’s Digital Camera Site (www.steves-digicams.com), Digital Camera Resource Page (www.dcresource.com), and Digital Photography Review (www.dpreview.com.)
• Flash problems. The flash wastes battery power and robs your photo of the subtlety found in natural lighting. Use a tripod, if you carry one, or make one: press one side of the camera against a wall or table and tilt until you’ve framed the photo. If your camera has a strap, hold it in between your teeth, extend the camera to straighten the cord, and take your snap—the cord’s tension keeps the camera steadier than your hand. • Complicated menus. Digital cameras contain more menu options than a Chinese restaurant. If you think you’ve changed a setting for the worse, but don’t know which one, look for the menu’s magic fix-all: Return to Default Settings. Some older cameras lack this setting, so remove their batteries and let the camera sit for 48 hours. That should reset everything to the way it was when it came out of the box. • Date and time. As soon as you take your new digital camera out of the box, head for the camera’s menu and set the camera’s date and time. That information’s embedded into every photo, making it easy for digital photo programs to sort them by shooting date. Without it, your folder of digital photos becomes a pile of numbered files, with no easy way for you to sort them. Keep an eye on the date when you recharge the batteries; some older cameras forget it and need resetting.
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
163
Camcorder Basics
Camcorder Basics Before PCs, editing video was so labor intensive that most people didn’t bother, much to the dismay of family members forced to watch these uncut, unedited, and generally unwatchable marathons. Editing required recording bits of camcorder footage to a VCR in exactly the right sequence, and then recording the VCR’s tape back to the camcorder—a process consuming more time than the two-week Hawaiian vacation the video was meant to capture. But just as word processors simplified writing, video-editing programs transform video editing into a simple matter of dragging and dropping clips into their playing order. Editing clips is as easy as editing paragraphs, neatly trimming out belches from family picnics. The following sections explain how to connect your camcorder to your PC, dump its video, and work in Windows XP’s built-in video editor, Movie Maker, to transform isolated clips that tell a poignant story. Or, at the very least, an order that leaves out those embarrassing blank stretches of footage where you left the camcorder turned on in the bag.
Connect the Camcorder to Your PC The first obstacle to editing your video stems from its location: it’s on a tape, not in your PC. Moving the movie from the tape to the PC is fairly easy if you own a digital video (DV) camcorder. Those camcorders ease the transfer by storing your insightful picnic footage in the same language your PC speaks: digitally, using long strings of numbers. Analog camcorders—often that older model that served you well before you got a DV camcorder—don’t understand NumberSpeak, making the PC connection much more difficult. Here’s how to connect both types of camcorders to your PC.
Digital Video (DV) Camcorder Among the many small holes in their cases, nearly every digital camcorder sports a FireWire port—a high-speed communications channel that spits data through a cable into your PC’s matching FireWire port (page 40). If your PC lacks a FireWire port, they’re easy enough to install (page 25), and nearly any computer, camera, or office-supply store sells FireWire cables. When connecting a digital camcorder to a PC, FireWire’s more than a mere conduit for flowing video. The cable also lets you control your camcorder with your PC: click an onscreen Play button, for instance, and the camcorder you’ve left on the floor, tethered to your PC, dutifully begins playing back the video. Placing the camera’s controls onscreen lets you concentrate on your editing, rather than having to fiddle with the camera’s tiny buttons.
164
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Follow these steps to connect your digital camcorder to your PC. 1. Connect the FireWire cable between the ports on your PC and the turned-off camcorder.
Connect the Camcorder to Your PC
Normally, FireWire devices are hot-swappable—you can leave them turned on when plugging and unplugging them. Some camcorders prove the exception, however, and generate small sparks that can burn out the circuitry. To be safe, keep your camcorder turned off when plugging it into a PC. 2. Turn on your camcorder and set it to VCR or Playback mode. Your PC immediately sends the welcome message shown in Figure 5-9, asking you which program should handle the chores of copying your footage to your PC. That message means the connection’s a success—definitely a good sign. If you’re already familiar with a video-editing program listed on the menu, click its name and then click OK to launch it. For instance, if you choose “Capture Video using Windows Movie Maker,” Windows XP automatically opens that program and leaves you at step 3 of the ““Capture Video” section (page 170). Otherwise, choose “Take no action.” That lets you choose a video-editing program at your leisure—either Movie Maker or something else—and use that program’s menus to import your video. Figure 5-9: When you connect a FireWire cable between the FireWire ports on your PC and your digital camcorder, Windows XP immediately notices, and offers to grab the video using one of the video-editing programs on your PC. If your PC came with a DVD burner, your PC may also include a video editor with more features than Windows XP’s bundled Movie Maker. Try them both to see which one you prefer, and then use that program to grab your video.
If Windows XP doesn’t greet your camcorder with enthusiasm (aka the Digital Video Device window shown in Figure 5-9), make sure you’ve connected the cables tightly, and the camcorder’s both turned on and set to play video—not record it. To make sure your camcorder didn’t fall asleep into Standby mode, turn it off and on again.
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
165
Connect the Camcorder to Your PC
If you still don’t see a greeting, open My Computer. If you spot your camcorder’s name listed as an icon, the connection’s fine. No icon? Then something’s wrong with your cable, the FireWire ports, or your camcorder itself. Now’s a good time to pull out your camcorder’s manual and start looking in the index under “PC connections.” You may need to tweak a menu setting.
Analog Camcorder Analog camcorders don’t store their images as numbers (that is, digitally), which means you need to hire a translator so the device can talk to your computer. Translators fall into three categories: • Third-party conversion services. Dropping off the tapes at a video-conversion service is your easiest, but most expensive, option. Found in the “Video Tape Duplication and Reproduction” section of nearly every city’s yellow pages, the technicians at these shops read comic books as your tapes play through a digital converter. A few days later, they hand you a few DVDs containing your unedited digital footage—along with a hefty bill for their Advanced Video Technician services. • Video capture devices. The second, less-expensive way, is to install some type of video capture device (page 25), costing between $50 and $100, to your PC. Some video capture devices install into your PC as cards; others plug into a USB port. Both types offer two ports: one for sound, and one for video. Connect a video cable between the video ports on the camcorder and the capture device, then connect an audio cable between the audio port on the camcorder and your PC’s line-in port (page 205). Run the capture software, play your tape, and read your own comic books while your PC saves the video to a file on your hard drive. • The digital camcorder solution. The third and easiest transfer method comes if you own a digital camcorder. Connect your analog camcorder to your digital camcorder and convert the footage yourself by following these steps: 1. Locate your analog camcorder’s Sound and Video Out ports. Ever watched your analog camcorder’s videos on your TV? Then you connected the camcorder to the TV using these same ports, which are usually called RCA or S-Video ports (both of them are discussed on page 96). 2. Find your digital camcorder’s Sound and Video In ports. Unless you’ve recorded TV shows or video tapes onto your digital camcorder, you may need to crack the camcorder’s manual to find these—especially on tiny camcorders where one port doubles as an In port and an Out port, depending on a menu setting.
166
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
3. Connect the analog camcorder’s Sound and Video Out ports to your digital camcorder’s Sound and Video In ports.
Editing Video
Use the cables that came with either camcorder to connect their ports. If the two camcorders use different types of ports, buy some cable converters, which are available at Radio Shack and most stereo stores. 4. Connect a FireWire cable between the FireWire ports on your digital camcorder and your PC. 5. Set your PC’s video capture software to record a live video stream. Windows XP’s built-in Movie Maker software (Start ➝ All Programs ➝ Movie Maker) can handle the job: Choose File ➝ Capture Video, the same option you use when recording a digital camcorder’s own tape. 6. Push the analog camcorder’s Play button. Your analog camcorder plays the video into your digital camcorder, which quickly converts the incoming footage to digital and does one of two things:
• Sends the video to the PC. If you see your analog camcorder’s footage playing on your PC, you’re in great shape: your digital camcorder supports DV Passthrough mode, which passes the incoming video straight to your PC. You’re lucky, as that saves you considerable time. • Records it to tape. If your digital camcorder doesn’t support DV Passthrough, or you can’t find that mode on its menus, then forget about the PC connection for now. Just tell the digital camcorder to record the incoming video to a digital tape. When you finish recording the tape, play it back for the PC to grab, just as you would for any other digital tape. Once you move the analog video into your PC as digital video, fire up Movie Maker 2, described next, and convert your raw, newly digitized footage into that sensitive, artistic statement you’ve been yearning to share with the world.
Editing Video Windows XP’s free movie editor, the imaginatively named “Windows Movie Maker,” does an adequate job of stringing together movie clips. The latest version, “Windows Movie Maker 2,” includes a wide variety of editing tricks to spice up your footage. Some effects go overboard, but most audiences prefer even a corny edited video over a boring, unedited video. Windows XP’s Service Pack 2 (page 480) automatically upgrades Movie Maker to Movie Maker 2. To check the version on your PC, choose Start ➝ All Programs ➝ Movie Maker ➝ Help ➝ About. If you’re not using Service Pack 2, download Movie Maker 2 for free at Windows XP’s downloads area (http://www.microsoft. com/windowsxp/downloads). Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
167
Editing Video
Windows Movie Maker 2 leads you through editing video in three separate phases: • Capture Video. Movie Maker scoops video from your camcorder or other video files on your PC. This step also lets you import sound files for background music, as well as digital photos, which come in handy as backdrops for opening and closing credits. • Edit Movie. The most labor-intensive part, here’s where you drag and drop your best clips onto a “storyboard”—a long strip representing your finished movie—rearranging the clips to create your actual movie. • Finish Movie. The easiest part—this one’s all up to Movie Maker itself. The program reads in your edited clips, creates smooth transitions between them, adds your soundtrack or sound effects, and saves it all into a movie. In fact, it lets you save the movie in several sizes: tiny files that fit on a camera phone or a huge ones aimed at a widescreen TV. Note: Movie Maker works best when you’ve adjusted your monitor’s “Screen resolution” setting (page 106) to 1024 × 768.
Here’s how to handle each of those three steps.
Capture Video Although Movie Maker’s Task Pane calls this step “Capture Video,” it’s really about collecting all your movie’s raw materials, including video, digital photos, and music. Everybody knows how much music enhances a movie, but photos add interest, as well. For instance, a photo of your vacation destination’s entrance sign, be it Motel 6 or Yosemite National Park, works well as an opener for a travel video. To import photos or sound files, choose File ➝ Import into Collections. Select the files you want, and Media Player tosses them into the Collections area along its right side. Gathering photos and sounds requires lots of pointing and clicking on your part, but Windows Movie Maker takes care of capturing the video on your camcorder. To tell Movie Maker to copy the video from your camcorder into your PC, follow these steps: 1. Open Movie Maker (Start ➝ All Programs ➝ Movie Maker) and choose File ➝ Capture Video. This tells Movie Maker to search your PC for any gadget that’s storing useable video. 2. Click the icon for the device containing your video, usually the camcorder, and then click Next. If your PC can capture video in several different ways—an attached Webcam, a video capture card, and a digital camcorder, for instance—Movie Maker stops
168
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
to ask you which device has the goods (see Figure 5-10, top). Click the one containing your video—most likely your digital camcorder.
Editing Video
Figure 5-10: Top: Choose your digital camcorder icon on the Video Capturer Device screen. Or, if you’re capturing from a Webcam or video capture card, choose that icon instead, and Movie Maker immediately lets you adjust that device’s settings. Second from top: Choose a file name and location where you want to store your incoming video. Third from top: Choose the video quality settings for your movie. Bottom: When you tell Movie Maker to begin the capture process, the program automatically rewinds your digital camcorder and starts recording from the beginning of your footage. Be sure to turn on the “Create clips when wizard finishes” checkbox. That tells Movie Maker to break each shot into separate clips, which makes them much easier to edit.
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
169
Editing Video
3. Enter a file name and folder for your incoming video, and then click Next. Type a file name for your incoming video, and a stashing spot on your hard disk (Figure 5-10, second from the top). Movie Maker normally stashes the footage in your My Videos folder, but click Browse to choose someplace else— perhaps a second, larger hard drive (page 255), if your PC has one. Captured video fills several gigabytes of space fairly quickly. 4. Choose Video Settings and then click Next. Naturally, you want the best quality video, but that can easily fill your entire hard drive with one video of Aunt Daisy’s visit. To keep your video to a manageable size, tailor its quality by choosing one of these three options: • Best quality for playback on my computer. This option offers a good compromise between quality and space and creates reasonably sized videos that play back well on a PC. The resulting file won’t be small enough to email or offer for download on a Web site, but it’ll look good when played on a PC. • Digital device format. The highest quality offered. Choose this for movies you want to burn to a DVD. Also choose this option even if you’re still saving your coins for a DVD burner; when you eventually buy the device, you’ll be able to burn your stored footage to DVDs. Finally, remember that Movie Maker can store your edited movie back onto your digital camcorder (using a different tape than the original, of course, since you don’t want to overwrite your raw footage). If you plan on performing that maneuver (see page 175 for details), you’ll want to pick this setting. • Other settings. Designed for serious video hounds, this option tailors the file size to fit more esoteric options—three different sizes of Pocket PC screen, for instance, or playing back on a computer network from a server, which is handy mostly for corporate settings. 5. Choose between capturing automatically or manually, and then click Next. If you have some time, choose to capture the entire tape automatically: Movie Maker rewinds to the tape’s beginning, if necessary, and begins collecting everything on the tape. (Want to collect only the first few minutes or so? When you reach that point, click the Stop Capture button, as explained in step 7.) To pick and choose a few selected tidbits from the tape, choose manually. Then, you start and stop the tape by clicking Movie Maker’s onscreen buttons, alternatively clicking the Start Capture and Stop Capture buttons to grab the good parts. 6. Turn on the “Create clips when wizard finishes” checkbox. This little checkmark makes all the difference. Turn on this checkbox for most hand-shot videos—family gatherings, sports games, trips, and other things you’ve filmed. That tells Movie Maker to keep track of when you filmed each shot and break each segment into a separate clip. Turn off this option only when you want your original recording left intact.
170
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Note: Although you see separate clips in your work area, Movie Maker still saves your imported video as one big file using the name and location you choose in step 1.
Editing with Movie Maker
7. Click Stop Capture when Movie Maker has captured all the video you need. When the ball game ends, click this button to stop Movie Maker before it begins capturing all that “Cat Playing with Yarn Ball” footage you used to pad the end of your tape. Movie Maker stops recording, and, if you chose the “Create clips” option in step 6, spends a few moments breaking your video into clips. GEM IN THE ROUGH
Creating a Slideshow in Movie Maker Although designed for video, Movie Maker works well with digital photos, too, letting you stick them between video clips for backgrounds or transitions.
Then drag the photos and music files onto the storyboard, stringing them together in the order you want them to play back.
Or, you may want to create a slideshow entirely of digital photos, complete with transitions, music, and your stunning narration.
To add narration, choose Tools ➝ Narrate Timeline. Speak into your PC’s microphone to record memories about each photo, saving each narrated photo as a separately named clip in your project.
Importing photos works much like importing video into Movie Maker. But instead of choosing File ➝ Import Video, choose File ➝ Add to Collections. Choose your best digital photos, whether taken with a digital camera or scanned in. Repeat the process to add music files, as well. Everything you import appears in your Collections area.
When you’re through, add some transitions (page 174) between your photos, and choose File ➝ Save Movie File to make Movie Maker compile your raw materials into a complete movie.
Editing with Movie Maker Editing a movie is like threading chunks of meat and vegetables onto a shish kabob. You cut each piece to the right size, position each one onto a long skewer so the flavors intermingle, and, hopefully, wind up with something tasty when you’re done cooking. Similarly, you take your movie’s raw materials (your imported video, digital photos, and music), cut each piece to the right size, and position each one in an order that enhances the rest. When you’re done, Movie Maker cooks your work into a finished movie. Movie Maker’s Collection area, shown in Figure 5-11, serves as the platter holding all your parts. The Storyboard along the bottom of Figure 5-11 serves as the skewer, where you thread the parts together. For a sneak preview of any clip or
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
171
Editing with Movie Maker
Task pane
sound in your Collection area, double-click it, and it plays in the Preview area along the right side of the window. Collection pane with video, sounds and photos
Monitor pane for previews
Contents pane (toggles between Timeline and Storyboard, shown here)
Figure 5-11: Movie Maker lets you work in three separate areas: the Collection area, the Storyboard, and the Preview window. All your imported clips, songs, and photos live in the Collection area. Weed out any awful clips from the Collection area by right-clicking them and choosing Delete. To view or hear a particular clip in the Collection area, double-click it; the Preview window to the right immediately begins playing it. In addition to the Preview window’s standard Stop and Play controls, the Next Frame and Previous Frame buttons let you find the best moment to start and stop each clip. When you familiarize yourself with the content in each of your clips, drag them onto the large squares in the Storyboard area, piecing them together into a movie. Rearrange clips on the Storyboard by dragging them to different spots as needed.
Follow these steps to assemble your clips into a movie. 1. Drag your clips onto the Storyboard in a rough order for your movie. The Collection area shows only the first frame of each clip. To remember how a particular clip looked, give it a double-click and watch the Preview pane. If it’s worth including in the movie, drag it onto the Storyboard below. Got a stinker? Right-click the clip and then choose Delete. Changed your mind about something you’ve just added to the Storyboard? Drag it back to the Collection area. Don’t worry if a clip needs a little editing; right now, just capture the movie’s general flow.
172
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
2. Trim each clip. Most of your clips probably need a bit of editing. Your camcorder sometimes jiggles a bit when you press the Record button, for instance, or the pitcher takes too long before throwing the ball. Once you place a clip on the Storyboard, Movie Maker lets you trim away its boring sections.
Editing with Movie Maker
To apply the knife, switch from Storyboard to Timeline view: click Show Timeline (Figure 5-12, top), and Movie Maker displays your clips by their length. Longer clips consume more space on the Timeline than shorter ones. Figure 5-12: Top: The film strip along Movie Maker’s bottom edge toggles between two views, each designed for different work. The Storyboard view shows each clip as a single frame, which is handy when placing your clips into the correct playback sequence. To change where a clip appears in your movie, drag it to a different location on the strip. Bottom: The Timeline view shows your clips by their length, so you immediately see when one long clip needs trimming to keep the pacing even. Shorten a clip by clicking it, and then drag inward or outward on the little black triangle poking from each edge. Below the filmstrip lies your Audio/Music layer, waiting for you to add a soundtrack with a quick drop of an MP3 file.
Drag either of these triangles to adjust clip length
To trim a clip’s beginning or end, click it; the clip sprouts a “handle,” a little black triangle on each side of the clip. Drag the triangles inward to trim the beginning or end. For instance, to edit out the camcorder jigglies from your clip’s beginning, drag the black triangle inward from the clip’s left edge. As you drag, the Preview window updates to show the clip’s new opening frame. When you’ve removed the jiggles, stop dragging. Click the Preview window’s Play button to check your edit. Dragged too far? Drag it back, and Movie Maker restores the trimmed edge. Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
173
Editing with Movie Maker
Admittedly, the Timeline’s small size makes for clumsy edits. For more precise editing, spread out your view by choosing View ➝ Zoom In or pressing Page Down. The Timeline expands, letting that one little clip fill the entire screen. A drag on the black triangle then trims the clip one frame at a time. Tip: To edit a clip’s boring middle section, but keep the beginning and ending, play the clip in the Preview window until the boring stuff starts to appear. Click Pause, and then choose Clip ➝ Split (or press Ctrl+L). Movie Maker neatly breaks that clip into two sections. Edit the tail end of the first section, and the beginning of the second section, to remove that boring part.
3. Add Transitions between each clip. Transitions control how one clip moves to the next. As your movie stands now, one clip stops, and then another immediately starts. But just as new word processor fans immediately start decorating their letters with fancy fonts, new movie editor fans quickly add wild transitions between their clips: one clip shatters into pieces, for instance, revealing the next clip “beneath” it. To see Movie Maker’s frenzy of transitions, choose Video Transitions from the drop-down menu in the Collections area. Movie Maker temporarily replaces your collection of clips with transitions. Double-click any transition to view its effect in the Preview window. Add your favorite transitions by switching to Storyboard view, shown in Figure 5-12, top; then drag the transition to the small squares between the frames. Tip: To avoid making your video look like a TV commercial, stick with simple fades between major scene changes.
4. Add opening titles and credits. You’ve assembled your movie’s order, edited the clips, added the soundtrack, and sprinkled in a few transitions. To begin wrapping it up, add your opening title and ending credits by choosing Tools ➝ Titles and Credits. Movie Maker guides you through typing in your title and credits and inserting them anywhere in the movie—the beginning and end (if you want to go for the traditional look), or overlaid on certain clips (if you’re looking for something a bit more artsy). 5. Add the soundtrack. Unless you took careful pains both when filming and editing, your movie’s a jumble of cut-off sentences. Cover up the hubbub with a soundtrack: drag a music file from your Collections area onto the Timeline’s Audio/Music layer, which is located right below your movie.
174
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Drag the end of the soundtrack inward to match the ending of your movie. Then, with a deft flourish, give it a right-click and choose Fade Out so the music tapers off to coincide with your movie’s ending.
Editing with Movie Maker
6. Save your movie. Movie Maker offers several ways to save your movie, which you can get to by choosing File ➝ Save Movie File. Unfortunately, your movie’s probably too big for any of the listed choices but the first and last. • My Computer. This saves your edited movie onto your hard drive. (Your captured, unedited version remains on your hard drive, too.) Choose this option if your PC has a writable DVD drive, and then burn it with your DVD-burning software. (Windows XP requires third-party software to burn DVDs.) • Recordable CD. This option fits your movie onto a CD, cutting its quality, if necessary, to fit a CD’s 700-MB size limit. Microsoft stores the movie in its own High-MAT format, playable on Windows PCs and a tiny handful of Panasonic DVD players. • Email. Since most email accounts can barely send a high-quality digital photo (page 158), Windows shrinks your video to a postage stamp before popping it into an email. • The Web. Again, Windows saves it to a miniscule size, and then tries to get you to sign up with their partner, Neptune, to store your video on the Internet—for a fee, of course. • DV camera. Your best option by far if you don’t own a DVD burner, this setting saves your edited video to a fresh tape in your digital camcorder at the highest quality. When you finally buy your DVD burner, import the edited version from the tape and burn it to the DVD.
Troubleshooting Movie Maker PCs have enough trouble handling large digital photos. Movies pack anywhere from 15 to 30 photos into a single second of digital footage. To edit movies successfully, your PC needs a large drive, a fast video card, and something for you to do while waiting for your PC to process those fancy transitions between your stunning vacation clips. Movie Maker works best on a Pentium 4; the video may appear choppy on slower computers or take exceptionally long to save to a file. Movie Maker may make the following complaints while you’re working; here’s how to solve them. • FAT32 4 GB file size error. This message pops up when your captured video file has swollen larger than 4 GB—which is larger than the limit of your hard drive’s storage system, known affectionately as FAT32. The solution is to stop, close Movie Maker, and convert your hard drive to the more modern storage system known as NTFS (page 275). Then restart your PC, reload Movie Maker, and Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
175
Webcams
start over. Newer PCs with large hard drives rarely display this message, but it turns up on older PCs, laptops, or newer PCs with small hard drives (40 GB and less). GEM IN THE ROUGH
Passing the Director’s Job to the Robot Windows Movie Maker does a fairly good job of walking you through the process of editing a movie, but sometimes those controls, transitions, effects, and timing decisions can seem overwhelming. If you’ve imported your video but don’t know where to start with all the controls, let Movie Maker’s AutoMovie take over. Choosing Tools ➝ AutoMovie whittles down your decisions to one: what style of movie do you want? Movie Maker offers five choices: • Flip and Slide. Movie Maker links your clips with slick transitions. For instance, one clip curls out to reveal the new one beneath. The end result can be a little amateurish, but it gives you an idea of the effect transitions have on a project. • Highlights Movie. A good choice for starters. This option sticks with basic editing tricks: simple cuts, fades, a quick title, and your own credits.
• Old Movie. Special effects “age” the video to resemble 30s flicks. Good for costume parties, but not much more. • Sports Highlights. Here, Movie Maker trims everything but your quick zooms and fast pans, capturing only the moments when you went wild at the controls. Choose your style, as well as any background music and titles, and Media Player takes the chair, assembling your clips to create its own director’s cut. You’ll probably cringe at the results. But looking at the finished movie gives you an example of how the clips, transitions, and music all come together on the storyboard to create a video. Whether AutoMovie leaves you with a good starting place or a bad example, it’s a starting point.
• Music Video. This cuts your clips to the pace of your soundtrack. Fast-paced music creates quick cuts; slow music adds a relaxed touch with longer clips.
• Can’t capture video automatically. Movie Maker usually controls your digital camcorder with confidence when automatically capturing video. But if your digital camcorder brushes off its advances, switch to Manual capture mode (page 170). Rewind the camcorder yourself, push its Play button, and click Movie Maker’s Start Capture button. • Not enough disk space available. This message appears when your hard drive’s too stuffed to save your edited video. That leaves you three options: cut the movie’s length by snipping clips, choose a lower quality setting to save space, or buy an external hard drive (page 266) to hold your movie.
Webcams Attracting voyeurs worldwide, Webcams provide a Web site’s visitors with a regularly updated glimpse into another place. Thousands of free Webcams, viewable
176
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
from Web sites worldwide compete for your attention, dishing up live-action ant farm excitement, sleeping cats, and even volcanic eruptions—if you happen to be watching at the right moment.
Webcams
Most Webcams just take snaps of the action every 30 seconds or so, automatically updating the Web site with the latest photo at regular intervals. The fanciest Web sites display a live video stream, just as if you were behind a camcorder’s lens. Posting a video stream is much more complicated than posting a single picture, so “live video” Webcams are still the exception, rather than the rule. Setting up your own Webcam takes considerable time and tweaking to make everything run correctly. Once you set the thing up, however, your work’s over. Your PC automatically grabs an updated picture from your video camera and posts it on your Web site to share with the world. The following sections take you through everything you need to add a Webcam to your PC, and then show you how to share your pictures with the world.
Video Camera Most Webcams are really just video cameras. They create video streams—live movies of whatever they may be aiming at, be it a waterfall, a massive swell, or a sleeping cat. When you attach these to your own PC, you can watch the entire video stream. Your PC extracts a single image from that video stream every 30 seconds, and then sends that particular picture to your Web site for the rest of the world to see. When installed, most Webcams place their icon in Windows XP’s My Computer program; open My Computer to see the camera’s icon. Double-click the camera’s icon to view the stream and adjust your camera’s position slightly should the cat move. Webcams fall into the following general categories; a few models are shown in Figure 5-13. • Desktop Webcam. At the lowest end of the scale, small, often ball-shaped video cameras (as shown in Figure 5-13, top) cost less than $50 at most computer or office supply stores. Once plugged into a USB port and taped to your monitor, the Webcam lets your friends watch you during instant messaging chats (see the online appendix, “Other Cool Things You Can Do Online,” available on the “Missing CD” page at www.missingmanuals.com). The small camera’s ease of use comes with some drawbacks, as they don’t allow much (or any) control over focus, brightness, or clarity. But, hey, at least some include their own doublesided sticky tape. • Digital camcorder. If you already own a digital camcorder, connect it to your PC’s FireWire port (page 40) to create a makeshift Webcam that’s a huge leap in quality from the desktop Webcam models. • Network Webcam. Most Webcams remain tethered to your PC with a short USB or video cable. Network Webcams come with a network port so you can plug them right into your network. Since network cables can extend for hundreds of feet, network Webcams can sit far from your PC, which can be handy
Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
177
Webcams
for rooftop or front-door surveillance. These models are more expensive than desktop Webcams and include extra circuitry to convert the camera’s video into your PC’s network signals. Cheap models start around $200, with prices rising quickly for higher-quality cameras. Figure 5-13: Top: Logitech’s QuickCam Express ($50) doesn’t offer large, clear pictures or automatic focus. But it’s fine for close quarters or instant chat programs where the video looks a little grainy, anyway. Middle: The Linksys WVC54g wireless Webcam ($200) comes in handy when mounting the camera far away from the PC—on the rooftop, for instance, letting you view the front door or yard. Bottom: On the high-end, Axis Communications’ $1,669.99 roof-mounted, fully trackable Webcam sends streaming video accessible over the Internet. You can view many network Webcams, both wired and wireless, from any Internetconnected PC. Therefore it’s important to password-protect your network Webcam if you don’t want strangers peeking in.
• Wireless Webcams. Wireless Webcams remove the PC’s tether altogether, and convert the video to network signals, which the camera then transmits wirelessly to your PC. Wireless Webcams grant free movement, letting you move the camera to the room’s other bookshelf during the party, for instance, or you can attach it to the cat’s collar for a CatCrawlCam. • Viewer-controllable Webcams. The high-end of the scale. These cameras offer “point and zoom” controls to let site visitors watch all angles of the action, be it
178
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
cars in the Plantation Pancake House parking lot or surfers zipping between the Ocean Beach Pier’s pillars. Logitech’s computer-controlled desktop model, QuickCam Orbit, sells for around $100. Axis Communications (www.axis.com) sells high-quality outdoor models costing more than $1,500.
Webcams
Video Capture Software Once you plug in your Webcam, Windows XP lets you view the camera’s images immediately—just double-click its icon inside My Computer. To share those images with others, you need extra software. Many Webcams come with their own software. Alternatively, instant messaging software automatically recognizes any Webcam installed on your PC and handles the chores of transmitting video to your friends during chats. But uploading photos to a Web site requires more work on your part, as well as Webcam software to periodically grab the camera’s images and upload them to the Internet. Luckily, Webcam software’s quite inexpensive, and some Webcams even toss free software into their boxes. If yours doesn’t have any, Microsoft offers the free but minimalist Timershot software (http://www.microsoft.com/windowsxp/ downloads/powertoys/xppowertoys.mspx). For a simple Webcam that uploads photos automatically to the Internet, Timershot may be all you need. The more advanced TinCam Webcam software (www.tincam.com) offers easier controls and more features, letting you grab images from two or more cameras simultaneously, send video streams, and send files to several Internet destinations. TinCam offers a free trial for 30 days, letting you toy with the settings before committing to the full $19 price.
Internet Connection, Web Site, and a Web Page Your Webcam and its software chug along as a team, letting you peek at your PC for a view of an exotic remote location, should your camera be pointing that way. But to place that view onto the Internet, you need Web space (see the online appendix, “Other Cool Things You Can Do Online,” available on the “Missing CD” page at www.missingmanuals.com)—a little storage area on the Internet for housing files, including a Web site. You may already have some but don’t know it: many ISPs offer their customers free Web space. Most limit that space to between 5 and 15 MB, which is more than enough for a photo. Setting up your Webcam software so that you can funnel images to a Web site works much like setting up a Web browser (page 375) or email program (page 352). The Webcam software demands these five all-important pieces of knowledge: Note: The following information serves as your “house key” for entering your Web space. Write it down and store it in a very safe place.
• Host address. Your Web site provider gives you this. It specifies your Web space’s parking place on the Internet. The address looks like ftp.myisp.com, members.isp.net, or something similar. Chapter 5: Digital Cameras, Camcorders, and Webcams PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
179
Webcams
• User name. Your Web site provider gives you your user name, too. You probably already use this same name to log onto the Internet, or perhaps to check your email. • Password. Your Web site provider also gives you your password. Just like the user name, this is often the same password you use to log onto the Internet or check your email. • Folder name. Web space lets you create folders, just like on your PC. You probably create this folder yourself when you create your Web site. • File name. Most Webcam software automatically supplies you with the name of the file that contains your snapped image. POWER USERS’ CLINIC
Digitizing Old Movies Think twice before volunteering to digitize those old reels of film sitting in Aunt Hannah’s closet. That quick-and-easy job you imagine may not be so simple in reality. The pros digitize old films with a telecine, a pricey, specialized movie scanner that digitizes each frame at a high quality, and then quickly stitches the frames back into a digital movie. Unfortunately, these pros charge upwards of $200 per hour. Cheaper film-to-DVD transfer services, dubbed “Transfer Mills” by the pros, simply point a digital camcorder at a wall and capture the movie as it plays back. You, too, can scan each frame and join them into a movie with Windows Movie Maker. But since old films contain 24 frames each second, you may not live long enough to finish the job. To speed things up, you can point your own digital camcorder at the wall and capture the projected movie. That gives you time to play with the settings until everything looks right, a luxury missing when you depend on the Transfer Mills. But before whipping out your wall cleaner, consider these obstacles: • Find a projector. Old films traditionally outlast their projectors. If Aunt Hannah’s projector died years ago, you can probably find an old one on eBay (www. ebay.com). But without a thorough cleaning, aging projectors can jam, incinerating your treasured film. Call a local camera repair shop for recommendations on projector cleaning and tune-ups.
180
• Frame rate. Old movie cameras and today’s camcorders don’t capture video with the same number of frames per second, leading to flicker. To compensate, flip through your digital camcorder’s menus for its Shutter Speed setting. Then, while watching the projected movie through the digital camcorder’s LCD screen, try different shutter speed settings until the flicker disappears. • Focus. To keep the projected scenery from fooling your camcorder’s autofocus, switch the camcorder to Manual Focus. Then focus it on the projected image. • White balance. Change this setting from Automatic to Manual, or try the Daylight setting. You may want to experiment for best results. Point the projector directly at the wall, or at a piece of white matte paper on the wall. Set up the camcorder on a tripod directly above the projector, adjust its settings, and then film the projected movie. Practice a few times, tweaking the camcorder’s settings until everything looks good. When you capture everything, run your movie through Windows Movie Maker, and then burn it to DVD. The resulting movie certainly won’t look as good as those restored by specialists. But the price is right, and at least you can finally view your old movies’ content, rather than their containers.
PCs: The Missing Manual PCs: The Missing Manual, eMatter Edition Copyright © 2008 O’Reilly & Associates, Inc. All rights reserved.
Enter all five items into your Webcam software so it knows where to send the image, and then tell it how often to send each new image. Once the image appears on your site—constantly updated courtesy of your Webcam software—you need one more thing: a page that displays the image. Most Webcam software, including TinCam, include sample Web pages. Place that Web page in your Web space and list that Web page on your Web site’s menu so visitors can choose to see it in their Web browsers.
Webcams
Troubleshooting Webcam Problems Windows XP makes setting up Webcams fairly easy. When Windows XP recognizes the camera, it automatically passes that information along to your Webcam software. But when Windows XP doesn’t recognize your camera, you’re in trouble. Fortunately, that rarely happens. Windows XP manages to stay on good terms with most USB devices (page 34), recognizing them as soon as you plug them in. If it doesn’t recognize your Webcam, you probably need to install its latest driver—the piece of software that lets Windows XP and your Webcam communicate on cheery terms. Download the driver