Modern Amination Methods Edited by Alfred0 Ricci
Related Titles from WILEY-VCH:
E Diederich / P. J. Stand (eds.) Met...
53 downloads
1348 Views
11MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
Modern Amination Methods Edited by Alfred0 Ricci
Related Titles from WILEY-VCH:
E Diederich / P. J. Stand (eds.) Metal-catalyzed Cross-coupling Reactions 1997, XXII. 518 pages with approx. 1000 figures and 20 tables Hardcover. ISBN 3-527-29421-X
J. -I? Sauvage / C. Dietrich-Buchecker (eds.) Catenanes, Rotaxanes and Knots A Journey through the World of Molecular Topology 1999. X. 406 pages with over 300 figures Hardcover. ISBN 3-527-29572-0
J. Mulzer / H. Waldmann (eds.) Organic Synthesis Highlights III 1998. X. 412 pages with 302 figures Softcover. ISBN 3-527-29500-3
J. Otera (ed.) Modern Carbonyl Chemistry 2000. X. ca. 400 pages with approx. 300 figures Hardcover. ISBN 3-527-29371-1
E Diederich / I? J. Stand (eds.) Templated Organic Synthesis 2000. XX. 410 pages with approx. 350 figures Hardcover. ISBN 3-527-29666-2
H. Hopt Classics in Hydrocarbon Chemistry Syntheses - Concepts - Perspectives 2000. X. 550 pages with approx. 300 figures Hardcover. ISBN 3-527-30216-6 Softcover. ISBN 3-527-29606-9
Modern Amination Methods Edited by Alfred0 Ricci
@WILEY-VCH Weinheim Chichester . New York . Toronto . Brisbane . Singapore
Prof. Dr. A. Ricci Dept. of Organic Chemistry University of Bologna Via Risorgimento 4 40136 Bologna Italy
This b k was carefully produced. Nevertheless, authors, editor and publisher do not warrant the information contained therein to be free of errors. Readers are advised to keep in mind that statements, data, illustrations, procedural details or other items may inadvertently be inaccurate.
Libary of Congress Card No: applied for British Libary Cataloguing-in-PublicationData: A catalogue record for this book is available from the British Library Die Deutsche Bibliothek - CIP Cataloguing-in-Publication-Data A catalogue record for this publication is available from DIe Deutsche Bibliothek 0 WILEY-VCH Verlag GmbH, D-69469 Weinheim (Federal Republic of Germany), 2000
ISBN 3-527-29976-9 Printed on acid-free and chlorine-free paper. All rights reserved (including those of translation in other languages). No part of this book may be reproduced in any form - nor transmitted or translated into machine language without written permission from the publishers. Registered names, trademarks, etc. used in this book, even when not specifically marked as such, are not to be considered unprotected by law. Composition: Mitterweger & Partner GrnbH, D-68723 Plankstadt Printing: S t r a w Offsetdruck GrnbH, D-69509 Morlenbach Bookbinding: Osswald & Co., D-67433 Neustadt (WeinstraBe) Printed in the Federal Republic of Germany.
Preface
The origin of this book can be traced back at least in part to the fact that the importance and practicality of amination reactions as a tool for obtaining target compounds is nowadays fully acknowledged by chemists in synthetic organic, medicinal, agricultural and natural product chemistry, as well as by the pharmaceutical and agricultural industries. This prominence is due to the explosive development during the past decade of novel and more efficient amination methods. These provide a great improvement with respect to the classical methods such as those based on the attack of a nucleophilic nitrogen atom to an electrophilic carbon, which are hampered by the difficult access to the electrophilic precursors - particularly when multifunctional derivatives are taken into consideration - and by the frequently recurring difficult reaction conditions. This book is intended to provide an overview of several areas of research in which amination plays a key role, and to introduce the reader to new concepts that have been developed quite recently for generating new C - N bonds. As the pharmaceutical and chemical industries move rapidly away from the development of racemic compounds, the access to synthetic routes that lead efficiently to enantiomerically pure materials is becoming increasingly important. For this reason, most of the contributions in this book refer to asymmetric synthesis. However, no attempt has been made to present a comprehensive work, and important areas such as asymmetric hydroxyamination [11 have not been dealt with. Furthermore, it may be worth mentioning that viable, useful and comprehensive sources of information about the methodological approaches to electrophilic amination developed since 1985 have already been reported [2], and that a chapter in Houben-Weyl reviewing several aspects of the asymmetric electrophilic amination [3] compiles important contributions up to 1995. In order to provide - whenever possible - new perspectives in the different areas treated in the book, the authors have been recruited among internationally recognized experts in their specific fields. This book is arranged in seven chapters which cover the following aspects of amination - even if the order of the contributions is somewhat arbitrary. Chapter 1 (K. A. Jdrgensen) deals with modem aspects of allylic amination reactions for preparing fundamental building blocks which have either distinct important properties or can be used for further transformations in organic synthesis. Two approaches - the
VI
Preface
nucleophilic allylic substitution and the direct allylic amination of simple alkenes are described. Considering the potential importance of electrophilic amination of alkenes, progress and steps being taken to carry out indirect amination of organometallics derived from hydroboration and hydrozirconation of alkenes are also described in Chapter 2 (E. Fernandez and J.H. Brown). In Chapter 3, J.-P. Genet, C. Greck and D. Lavergne provide an exhaustive overview of modem methods (up to 1998) based on the stereoselective electrophilic amination of chiral carbon nucleophiles for making a- and p-amino acid derivatives. Chapter 4 (H. Kunz, H. Tietgen and M. Schultz-Kukula) also addresses the synthesis of a- and p-amino acids with high enantiomeric purity, but a different approach based on the reaction of carbohydrate-derived prochiral imines with nucleophiles is used. More about the use of organometallics is to be found in the following two chapters. Thus, Chapter 5 (E. Carreira, C.S. Tomooka and H.Iikura) focuses on the various methods that have been reported for the synthesis of metal nitride complexes. These complexes have an intriguing array of reactivity and structure, and display a host of desirable properties in material sciences, medicine and chemical synthesis. The nitrogen atom transfer from a nitrido complex is reviewed in Chapter 6 by M. Komatsu and S. Minakata, with special emphasis on enantioselective transformations in aziridination reactions using nitridomanganese complexes. A fairly new approach to C - N bond formation - the transition metal-catalyzed synthesis of arylamines - is the aim of Chapter 7, in which J. F. Hartwig provides an exhaustive account of the palladiumcatalyzed amination of aryl halides and sulfonates for use in complex synthetic problems. The breakthrough required to convey efficiency and high performance is the catalyst design, and many new challenges remain for the synthetic chemist in this area. Complete reference citations have been provided since, as it is increasingly recognized, they are a requirement for manuscripts and proposals. It is my sincere hope that this book will provide synthetic chemists with new opportunities for achieving their synthetic goals. For those students who are reading the book in order to enhance their synthetic “toolkit”, I hope they will enjoy the variety of these new reactions which span from stoichiometric to catalytic, from natural product-based protocols to synthetic strategies employing organometallic complexes. I gratefully acknowledge the work done by all authors in presenting up-to-date and well-referenced contributions. Without their effort this volume would not have been possible. Furthermore, it was a pleasure to contribute with the Wiley-VCH “crew” in Weinheim, who not only did an excellent job in producing the book, but also helped me in a competent manner in all phases of its preparation. Finally, I am grateful to Dr. Golitz and to Dr. Eckerle who originally encouraged the idea of creating a book about Modern Amination Methods. Bologna, January 2000
Alfred0 Ricci
Preface
VII
References [I]
[2] [3]
(a) G. Li, H.-T. Chang, K. B. Sharpless,Angew. Chem. Int. Ed. Engl. 1996.35.451; (b) G. Li, H. H. Angert, K. B. Sharpless,Angew. Chem. Int. Ed. Engl. 1996,352813; (c) H. C. Kolb, K. B. Sharpless, Asymmetric Aminohydroxylation in Transition Metals for Organic Synthesis, Vol. 2; M. Beller, C. Bolm (Eds.);WILEY-VCH, Weinheim, 1998,243 - 260; (d) G. Schlingloff, K. B. Sharpless, Asymmetric Aminohydroxylationin Asymmetric Oxidation Reactions: A Practical Approach; T.Katsuki (Ed.); Oxford University Press, Oxford, in press. E. Erdik, M. Ay, Chem. Rev. 1989, 89, 1947. G. Boche in Houben-Weyl. Methods of Organic Chemistry, Stereoselective Synthesis, Vol. E21e; G . Helmchen, R. W. Hoffmann, J. Mulzer, E. Schaumann (Eds.); Thieme, Stuttgart, 1995, 5133 5156.
Contents
Preface V List of Authors XV
Chapter 1 Modem Allylic Amination Methods 1 Karl Anker J@rgensen
Introduction 1 Nucleophilic Amination of Functionalized Alkenes 2 Amination of Allyl Alcohols 3 Amination of Allyl halides 6 Amination of Allyl Halides and Acetates Catalyzed by metal Complexes 8 Electrophilic Amination of Non-Functionalized 1.2.3 Alkenes 14 Amination with Nitrene Complexes 15 1.2.4 Amination Based on Ene-Like Processes 16 1.2.5 1.2.5.1 Type 1 Reactions: Ene Reaction Followed by [2,3]-Sigmatropic Rearrangement 19 1.2.5.2 Type 2 Ene Reactions 22 Allylic Amination with Ar-NX and a Metal Catalyst 27 1.2.6 Summary 32 1.3 Acknowledgments 33 References 33
1.1 1.2 1.2.1 1.2.2 1.2.2.1
Chapter 2 Eletrophilic Amination Routes from Alkenes 37 Elena Fernandez and John M . Brown
2.1 2.2 2.2.1 2.2.1.1 2.2.1.2 2.2.1.3 2.2.2
Introduction 37 Indirect Stoichiometric Amination 37 Amination via Organoboron Compounds 38 Applications to the Synthesis of Primary Amines 41 Applications to the Synthesis of Secondary Amines 46 Applications to the Synthesis of Tertiary Amines 5 1 Amination via Organozirconium Compounds 5 1
X
Contents
2.3 Indirect Catalytic Amination 52 2.4 Direct Alkene Amination 59 References 6 1
Chapter 3 Stereoselective Electrophilic Amination with Sulfonyloxycarbamates and Azodicarboxylates 65 Jean-Pierre Genet, Christine Greck and Damien Lavergne
Introduction 65 Sulfonyloxycarbamates 67 Preparation of N-[(arylsulfonyl)oxy]carbamates 67 Stereoselective Synthesis of a-Amino Carboxylic and Phosphonic Acids via Electrophilic Amination with Lithium rerr-Butyl N-(tosyloxy) Carbamate 68 3.2.2.1 a-Amino Carboxylic Acids 68 3.2.2.2 a-Amino Phosphonic Acids 68 Reactions of Ethyl N-((p-nitrobenzenesulfonyl)oxy(carbamate 3.2.3 with Chiral Enamines and Enol Ethers 69 Dialkylazodicarboxylates 7 1 3.3 Electrophilic Amination of Silyl Ketene Acetals 72 3.3.1 Electrophilic Amination of Chiral Amide Enolates 76 3.3.2 Electrophilic Amination of Chiral Ester Enolates 80 3.3.3 3.3.3.1 j3-Hydroxy Esters 80 3.3.3.2 P-Amino Esters 86 Electrophilic Amination of Ketone Enolates 88 3.3.4 Electrophilic Amination of Phosphorous Stabilized 3.3.5 Anions 91 3.3.5.1 Oxazaphospholanes 92 3.3.5.2 Diazaphospholidines 94 Chiral Electrophilic Aminating Reagents 96 3.4 Azodicarboxylates and Azodicarboxamides 96 3.4.1 Chiral Catalytic Approach 99 3.4.2 Conclusion 101 3.5 References 101
3.1 3.2 3.2.1 3.2.2
Chapter 4 Glycosylamines as Auxiliaries in Stereoselective Syntheses of Chiral Amino Compounds 103 Heiko
4.1 4.1.1 4.1.2 4.1.3
Tietgen, Martin Schultz-Kukula and Host Kunz
Introduction 103 Exo Anomeric Effect 104 Influence of Coordinating Centers 105 Pseudo-Enantiomeric Carbohydrates in Stereoselective Syntheses 105
Contents
4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.3 4.3.1 4.3.2
XI
Syntheses of Amino Acids 106 Syntheses of Enantiomerically Pure a-Amino Acids 106 Syntheses of Enantiomerically Pure P-Amino Acids 108 Rearrangement Reactions 111 Stereoselective Multicomponent Reactions 114 Stereoselective Syntheses of Chiral Heterocycles 118 Heterocycles Through Cycloaddition Reactions 118 Stereoselective Syntheses of Chiral Piperidines via Addition Reactions to 4-Pyridones 125 4.4 Conclusion 127 References 127
Chapter 5 Syntheses of Transition Metal Nitride Complexes 129 Craig S. Tomooka, Hitoshi likura and Erick M. Carreira
Introduction 129 Nitrogen-Atom Sources for the Reparation of Metal Nitrides 130 N3- Reagents 131 5.2.1 N2- Reagents 132 5.2.2 N1- Reagents 132 5.2.3 Reagents 133 5.2.4 Other Reagents 134 5.2.5 Ligands in Metal Nitride complexes 134 5.3 5.4 Transition Metal Nitride Complexes 140 5.4.1 Vanadium 140 5.4.2 Tantalum 142 5.4.3 Chromium 143 Molybdenum 146 5.4.4 5.4.5 Tungsten 150 5.4.6 Manganese 152 Technicium 155 5.4.7 5.4.8 Rhenium 157 5.4.9 Ruthenium 159 5.4.10 Osmium 161 5.5 Conclusion 164 References 165
5.1 5.2
Chapter 6 Asymmetric Nitrogen Transfer with Nitridomanganese Complexes 169 Satoshi Minakuta and Mitsuo Komutsu
6.1 6.2
Introduction 169 Achiral Nitrogen Atom Transfer to Olefins 170
XI1
Contents
6.2.1
Nitrogen Atom Transfer Reaction with Achiral Nitrido Complexes 170 6.2.2 Nitrogen Atom Transfer Aziridination of Olefins with Other Nitrogen Sources 174 6.3 Synthesis of Chiral Nitridomanganese Complex 177 6.4 Asymmetric Aziridination of Olefins with Chiral Nitridomanganese Complexes 179 6.4.1 Asymmetric Aziridination of Styrene with Nitrido Complex 179 The Asymmetric Aziridination of Styrene 6.4.2 with a Variety of Nitrido Complexes 183 Asymmetric Aziridination of Styrene Derivatives 185 6.4.3 6.4.4 Aziridination of Conjugated Dienes 188 6.4.5 Asymmetric Amination of Silyl Enol Ether 191 6.5 Conclusion 192 References 193
Chapter 7 Palladium-Catalyzed Amination of Aryl Halides and Sulfonates 195 John E Hartwig
7.1 7.1.1 7.1.2 7.1.3 7.1.4 7.2 7.2.1 7.2.2 7.3 7.3.1 7.3.1.1 7.3.2 7.3.2.1 7.3.2.2 7.3.2.3 7.3.2.4 7.3.2.5 7.3.3
Introduction 195 Synthetic Considerations 195 Prior C-X Bond-Forming Coupling Related to the Amination of Aryl Halides 197 Novel Organometallic Chemistry 197 Organization of the Chapter 198 Background 199 Early Palladium-Catalyzed Amination 199 Initial Synthetic Problems to be Solved 201 Palladium-Catalyzed Amination of Aryl Halides Using Amine Substrates 201 Initial Intermolecular Tin-Free Aminations of Aryl Halides 201 Initial Intramolecular Amination of Aryl Halides 203 Second-Generation Catalysts: Aryl Bisphosphines 204 Amination of Aryl Halides 204 Amination of Aryl Triflates 208 Amination of Heteroaromatic Halides 209 Amination of Solid-Supported Aryl Halides 211 Amination of Polyhalogenated Aromatic Substrates 2 11 Third-Generation Catalysts with Alkylmonophosphines: High Turnover Numbers, General Amination of Bromides at Room Temperature, and General Amination of Aryl Chlorides at Low Temperatures 212
Contents
7.3.3.1
XI11
High-Temperature Aminations Involving P(t-Bu), as Ligand 212 7.3.3.2 Use of Sterically Hindered Bisphosphine Ligands 213 7.3.3.2.1 Amination of Aryl Bromides and Chlorides 213 7.3.3.2.2 Amination of Aryl Tosylates 214 7.3.3.3 P,N Ligands and Dialkylphosphinobiaryl Ligands 2 15 7.3.3.4 Phenyl Backbone-Derived P,O Ligands 216 7.3.3.5 Low-Temperature Reactions Employing P(t-Bu), as Ligand 217 Aromatic C - N Bond Formation with Non-Amine 7.4 Substrates and Ammonia Surrogates 219 7.4.1 Amides, Sulfonamides and Carbamates 221 7.4.2 Allylamine as an Ammonia Surrogate 222 7.4.3 Imines 222 7.4.4 Azoles 223 7.5 Amination of Base-Sensitive Aryl Halides 226 7.6 Applications of the Amination Chemistry 228 7.6.1 Synthesis of Biologically Active Molecules 228 7.6.1.1 Arylation of Secondary Alkylamines 228 7.6.1.2 Arylation of Primary Alkylamines 230 7.6.1.3 Arylation of Primary Arylamines 231 Applications to Materials Science 233 7.7 7.7.1 Polymer Synthesis 233 7.7.2 Synthesis of Discrete Oligomers 236 7.7.3 Synthesis of Small Molecules for Materials Applications 239 7.7.4 Palladium-Catalyzed Amination for Ligand Synthesis 240 7.8 Mechanism of Aryl Halide Amination and Etheration 241 7.8.1 Oxidative Addition of Aryl Halides to L,Pd complexes (L = P(o-Tolyl),, BINAP, DPPF) and its Mechanism 241 7.8.2 Formation of Amid0 Intermediates 244 7.8.2.1 Mechanism of Palladium Amide Formation from Amines 244 7.8.3 Reductive Eliminations of Amines from Pd(I1) Amido Complexes 247 7.8.4 Competing (P-Hydrogen Elimination from Amido Complexes 252 7.8.5 Selectivity: Reductive Elimination versus P-Hydrogen Elimination 253 7.8.6 Overall Catalytic Cycle with Specific Intermediates 255 7.8.6.1 Mechanism for Amination Catalyzed by P(o-C,H,Me), Palladium Complexes 255
XIV
Contents
Mechanism for Amination Catalyzed by Palladium Complexes with Chelating Ligands 256 7.9 Summary 257 Acknowledgments 258 References 258 7.8.6.2
Index
263
Abbreviations
acac Alloc BINAP BISBI Bn Boc CAN CP CP" CT dba DBAD DBU DCE de DEAD DIAD DMS DPEphos DPPBA DPPe DPPF DPPP DTBAD D'BPF dr ee EWG GPC IPC KDO LDA
Acetonylacetate Allyloxycarbonyl 2,2'-Bis(dipheny1phosphino)- 1,l' -binaphthyl 2,2'-Bis [(diphenylphosphino)methyl]-1,l '-biphenyl Benzyl tert-Butoxycarbony 1 Ceric ammonium nitrate $-C y clopentadieny 1 $-Pentamethyl cyclopentadienyl Chloramine-T 1 3 -Diphenylpenta- 1,4-dien-3-0ne Dibenzyl azodicarboxylate 1,8-Diazabicyclo[S.4.0]undec-1-ene 1,2-Dichloroethane Diastereomeric excess Azodicarboxylate Diisopropyl azodicarboxylate Dimethyl sulfide Bis(2,2'-dipheny1phosphino)diphenylether 2-(Dipheny1phosphino)benzoic acid Bis(dipheny1phosphino)ethane 1,l '-Bis(dipheny1phosphino)ferrocene Bis(dipheny1phosphino)propane Di-tert-butyl azodicarboxylate Bi s(di-tert-butylphosphino)ferrocene Diastereomeric ratio Enantiomeric excess Electron withdrawing group Gel permeation chromatography Isopinocamphenyl 3-Deoxy-D-manno-octulosonicacid Lithium diisopropylamide
XVI
Abbreviations
LiBTOC LiHMDS LUMO MAP Mes
M, MOP MTPA Mw NBS NMP NOBIN NOE NPhth Ns PHANEPHOS
PTAB PYr QUINAP RAMP rt
SAMP TBAF TBS TDCPP TeVY TFAA
THF tipt
TMP TMSCl TMSCN TMSOTf To1 TPD TPP Ts Ts,O Xantphos
tert-Butyl-N-lithio-N-[@-toluensulfonyl)oxy]carbamate Lithium hexamethyldisilazide Lowest unoccupied molecular orbital 2-Amino-2’-(diphenylphosphino)-1,l ’-binaphthyl Mesityl Number average molecular weight 2-Methoxy-2’-(diphenylphosphino)-1,l’-binaphthyl a-Methoxy-a-(trifluoromethy1)phenylacetic acid Molecular weight N-Bromosuccinimide N-Methy lpyrrolidone 2-Amino-2’-hydroxy-1,l ’-binaphthyl Nuclear Overhauser effect Phthalimide 4-Nitrobenzy lsulfonyl 4,12-Bis(diphenylphosphino)[ 2.21-paracyclophane Phenyltrimethylammonium tribromide Pyridine 1-(2-Diary lphosphino-1-naphthy1)isoquinoline (R)-(+)-1-Amino-2-(methoxymethy1)pyrrolidine Room temperature (3-( -)-1-Amino-2-(methoxymethyl)pyrrolidine Tetrabutylammonium fluoride tert-Butyldimethylsilyl meso-Tetra-2,6-dichlorophenylporphyrine Terpyridine Trifluoracetic anhydride Tetrahydrofuran Triisopropyl thiophenol 5,1Ol15,20-Tetramesitylporphyrine Chlorotrimethylsilane Cy anotrimethylsilane Trimethylsilyl trifluorometanesulfonate Tolyl 4,4’-Bis(3-methylphenylpheny1amino)biphenyl 1,5,15,20-Tetraphenylporphyrineanion Toluene-p-sulfony1 Toluene-p-sulfonyl anhydride 9,9-Dimethyl-4,6-bis(dipheny1phosphino)xanthene
List of Authors
John M. Brown Dyson Perrins Laboratory University of Oxford South Parks Rd. GB-Oxford OX1 3QY England Erick M. Carreira Laboratory of Organic Chemistry ETH-Centre Universitatstrasse 16 CH-8092 Zurich Switzerland Elena Fernandez Departament de Quimica Universitat Rovira I Virgili Placa Imperial Tarraco 1 ES-43005 Tarragona Spain Jean-Pierre Genet Laboratoire de Synthkse SClective Organique et Produits Naturels Ecole Nationale SupCrieure de Chimie de Paris 11, rue Pierre et Marie Curie F-75231 Paris Cedex 05 France
Christine Greck Laboratoire Synthkse, Interactions et Rkactivitk en Chimie Organique et Bioorganique UniversitC Versailles - Saint Quentin en Yvelines 45, avenue des Etats-Unis F-78035 Versailles Cedex France John F. Hartwig Department of Chemistry Yale University P.O. Box 208107 New Haven, CT 06520-8107 USA Hitoshi Iikura Laboratory of Organic Chemistry ETH-Centre Universitatstrasse 16 CH-8092 Zurich Switzerland Karl Anker JGrgensen Center for Metal Calalyzed Reactions Department of Chemistry Aarhus University Langelandsgade 140 DK-8000 Aarhus C Denmark
Mitsuo Komatsu Department of Applied Chemistry Osaka University Yamadaoka 2-4, Suita JP-565087 1 Osaka Japan
Martin Schultz-Kukula Institut fur Organische Chemie Universitat Mainz Duesbergweg 10- 14 D-55099 Mainz Germany
Horst Kunz Institut fur Organische Chemie Universitat Mainz Duesbergweg 10- 14 D-55099 Mainz Germany
Heiko Tietgen Institut f i r Organische Chemie Universitat Mainz Duesbergweg 10- 14 D-55099 Maim Germany
Damien Lavergne Laboratoire de Synthkse Sklective Organique et Produits Naturels Ecole Nationale Suphrieure de Chimie de Paris 11, rue Pierre et Marie Curie F-75231 Paris Cedex 05 France
Craig S. Tomooka Laboratory of Organic Chemistry ETH-Centre Universitatstrasse 16 CH-8092 Zurich Switzerland
Satoshi Minakata Department of Applied Chemistry Osaka University Yamadaoka 2-4, Suita JP-565087 1 Osaka Japan
Modern Amination Mefhods Edited by Alfredo Ricci copyright 0 WILEY-VCH Verlag GmbH, 2wO
1 Modem Allylic Amination Methods Karl Anke r J$ rg ensen
1.1 Introduction One of the challenges in organic chemistry is to prepare fundamental molecular building blocks which either have distinct important properties, or can be used for further transformations in organic synthesis. Ally1 amines 1 can be used as fundamental building blocks in organic chemistry, and their synthesis is an important industrial and synthetic goal. They can be incorporated in natural products, but often the allyl amine moiety is transfornfed to a range of products by functionalization, reduction or oxidation of the double bond.
1
The synthetic methods for the preparation of allyl amines can be divided into several types of reactions [l]. In the present chaptgr, the focus will be on the formation of allyl amines by reaction of substrates having an allylic bond which can be broken. Two approaches will be covered and these are outlined in Scheme 1: the first method (a) is the synthesis of allyl amines by nucleophilic allylic substitution of compounds having an allyl functionality; the second method (b) is the direct allylic amination of simple alkenes.
(b)
+
R’NX
-
Scheme 1
Other types of allylic amination reactions include a variety of indirect approaches such as reduction of a,p-unsaturated imines and oximes, rearrangement of aziridines, and elimination of water from vicinal amino alcohols. However, these reactions will not be considered in this chapter [2]. The present chapter on modem allylic amination methods will be restricted mainly to an overview of some of the major developments for the transformation of allylic compounds into allyl amines according to reaction types (a) and (b) in Scheme 1, and an attempt is made to cover the literature up to August 1999. The reaction type (a) in Scheme 1 for the allylic amination reaction uses substrates which have an allylic C-X (X = heteroatom, halide) bond and is mainly nucleophilic amination of functionalized alkenes, whereas reaction type (b) is a direct allylic amination of an allcene, based on electrophilic amination of nonfunctionalized alkenes and involves a cleavage of a C-H bond.
1.2 Nucleophilic Amination of Functionalized Alkenes Nucleophilic amination of alkenes functionalized by an allylic C-X (x = heteroatoms, halides) as outlined in Eq. (1) is a simple and direct procedure for the synthesis of allyl amines, since very efficient methods for the selective allylic h c tionalization of alkenes are available.
X = heteroatom. halide
1.2 Nucleophilic Amination of Functionalized Alkenes
3
1.2.1 Amination of Ally1 Alcohols The Mitsunobu reaction is an attractive procedure for the transformation of an allyl alcohol into an allyl amine [3]. The reaction can be carried out under very mild conditions with a variety of amine nucleophiles. Recently, this method has been used for the preparation of configurationally pure primary allyl amine 4 (Q. 2) by the reaction of allyl alcohols 2 with diisopropyl azodicarboxylate (DIAD)and triphenyl phosphine, followed by phthalimide (PhthNH) as the ammonia synthon giving 3 [4]. Reaction of 3 with hydrazine or methyl amine gave allyl amine 4. An advantage of this reaction sequence is the almost complete conservation of alkene geometry, both under the Mitsunobu coupling conditions and after the deprotection of the amino group. Use of iminocarbonate as the nitrogen nucleophile donor gives a mixture of trans- and cis-products.
DIADPh3P PhthNH
OH 2
HzNNHz
76-98%*
NPhth
3
R'
76-88 %4
Several examples of reactions of allyl alcohols under Mitsunobu reaction conditions using diethyl azodicarboxylate (DEAD) and triphenyl phosphine giving allyl amines are known. An example is the reaction of the steroid 5 with azide nucleophiles under Mitsunobu reaction conditions, giving the corresponding azide 6 in 63 % yield (Eq. (3)) [5]. The reaction is regioselective with inversion of the configuration and no S,21 substitution is observed.
The nucleophilic addition to allyl alcohols under Mitsunobu reaction conditions is normally regioselective with no allylic rearrangement during the reaction [6].
4
J@rgensen
The Overman rearrangement, a thermal [3,3]-sigmatropic rearrangement of allylic trichloroacetimidates, is an attractive procedure for the preparation of allyl amines from allyl alcohols (Eq. (4)) [7]. Ph
[3,3]-sigmatropic rearrangement
3
8
9
The first step in this reaction is formation of the allyl trichloroacetimide 8 formed from allyl alcohol 3 by reaction with trichloroacetonitrile. The allyl amides 9 are formed by the [3,3]-sigmatropic rearrangement of 8, followed by hydrolysis. The reaction proceeds with good yield for primary and secondary amides; however, for products where the amide nitrogen is bound to a tertiary carbon atom the yields are generally low. Overman has suggested a cyclic six-membered transition state 10 for the reaction [8]. The experimental result for the formation of substituted alkenes is similar to that observed for other [3,3]-sigmatropic rearrangements. Furthermore, the preferred formation of the trans-isomer of the di- and trisubstituted alkenes is consistent with transition state 10. The activation parameters for the [3,3]-sigmatropicrearrangements are similar to related rearrangement reactions.
10
The rearrangement reaction can be catalyzed by various metal salts, and salts such as homogeneous solutions of palladium(II) and mercury(I1) complexes have emerged as relatively good catalysts [9]. Based on the catalytic properties of soluble palladium(II) salts, attempts to perform enantioselective rearrangement reactions were performed. The used of a cationic palladium catalyst with a chiral nitrogen ligand led to the first enantioselective version of the Overman rearrangement (Eq. (5)) [9]. The [3,3]-sigmatropic rearrangement of 11 catalyzed by the chird palladium complex 13 gave 12 in 69 % yield and up to 55 % enantiomeric excess (ee).
1.2 Nucleophilic Amination of Functionalized Alkenes
5
Ar
NAr
13
5 mol Yo
12
11
55 YOee
20
The enantioselectivity of the rearrangement reaction of allylic imidates has been improved significantly by the introduction of chiral ferrocenyl oxazoline catalysts such as 14 [ 101.The use of 14 as catalyst for the reaction of a series of different Z- and E-imidates similar to 11 gave the amides in good yield and with ees higher than 90 % for several of the substrates studied and the chiral ferrocenyl oxazoline catalysts are until know the best catalysts for this rearrangement reaction. It is notable that an exchange of the bridging trifluoroacetate group with an iodine-bridging complex leads to a complex which is inactive, while the chloride-bridging complex is a poor catalyst in terms of reaction rate, but gives the same enantioselectivity as 14 [lOa]. Furthermore, it should be pointed out that the ferrocenyl trimethylsilyl substituent is also of utmost importance for the enantioselectivity as the ee of the reaction is reduced significantly by removal of this substituent [ lOa]. Overman et al. have also investigated other planar -chiral cyclopalladated ferrcenyl amines and imines as chiral catalyst for the allylic imindate rearrangement reactions [lob].
14
6
Jgrgensen
Several other chiral ligands have also been introduced for the rearrangement reaction [ 111. The use of a tridenate ligand containing an (R)-phenyloxazoline as the chiral unit gave in combination with palladium(II) up to 83 % ee for one substrate [ 1la], while Hayashi et al. have investigated the rearrangement reaction catalyzed by a series of different chiral palladium complexes including bisoxazolines and P,N chelating ligands ((S)-(+)-2-(2-diphenylphosphino)phenyl)-4-(benzyl)ox~oline) with the latter giving up to 81 % ee of the allyl amide; however, the yields were often low [1lb]. One problem with the metal-catalyzed Overman reaction is the basicity of the imidates. However, this problem has also been solved be Overman et al. by the introduction of the less basic allylic N-benzoylbenzimidates. The application of these allylic N-benzoylbenzimidates and palladium(II) chloride as the catalyst improved both the yield, selectivity and rate for the formation of the allyl amines [9]. The palladium(I1)-catalyzed rearrangement of allyl imidates for the formation of allyl amines has also been investigated for chiral imidates (Eq. (6)) [12]. The chiral imidate 15 undergoes a palladium(I1)-catalyzed rearrangement to 16, which was applied for the synthesis of (R)-N-(trichloracety1)norleucinol 17 as presented in Eq. (6).
15
16
17
Several applications of the Overman rearrangement for different type of substrates have been published and some examples can be found in [131.
1.2.2 Amination of Allyl Halides The second approach for the nucleophilic amination reactions to be considered here will be reactions of allyl halides and allyl acetates leading to allyl amines. Allyl halides are normally very reactive in S,2 reactions, but the direct coupling of allyl halides with nitrogen nucleophiles has been performed with limited success [4], as di- and trialkylated by products often predominate. The application of the Gabriel synthesis can to a certain extent eliminate the problem with polyalkylation of amines using, e.g., the stabilized phthalimide anion 19 as the nucleophile. The allyl amine 20
1.2 Nucleophilic Amination of Functionalized Alkenes
7
can thus be prepared in good yield from alkyl halides 18 by reaction with potassium phthalimide 19 (Eq. (7)) [14].
18
20
19
A problem with the use of the phthalimide anion as the nucleophile is the removal of phthaloyl group from the product [15]. Therefore, several attempts have been made to develop reagents with a more labile protecting group than the phthalimide. Compounds 21 and 22 are among some of the reagents investigated. By application of 21 and 22, better yields of some primary allyl amines were obtained, compared to the traditional method using the phthalimide [16.] The advantage of 21 and 22 as the nitrogen donor for the formation of allyl amines is that the substituents at the nitrogen atom can easily be removed with gaseous hydrogen chloride after alkylation. However, the substrate tolerance is low, and the reagents are somewhat exotic.
3
Eto.P-N-SiMe3 Em’ H 21
22
The use of the stabilized anion of di-t-butyl iminocarbonate ((Boc),NH) 24 is more promising in allylic amination reaction. It reacts under mild conditions with a variety of primary and secondary halides and mesylates 23, giving the allyl amines 25 in high yields (Eq. (8)) [17]. The use of 24 as the nitrogen donor in the amination reaction has the great advantage compared to the palladium-catalyzed amination with the same reagent, that cis-alkenes react without scrambling of the double bond, an important aspect considering the isomerization sometimes observed using palladium-catalyzed substitution.
8
J#rgensen
5 mol % Lil
23
24
25
1.2.2.1 Amination of Ally1 Halides, Acetates, etc. Catalyzed by Metal Complexes In 1965, Tsuji et al. observed that palladium could catalyze the allylic alkylation reaction [18]. This discovery, which is a very attractive way to expand the scope of the allylic amination reactions mentioned above, has stimulated an intense research in this field, and even though complexes of nickel, platinum, rhodium, iron, ruthenium, molybdenum, cobalt, and tungsten have been found also to catalyze the alkylation, palladium complexes have received by far the greatest attention [19]. As a spin off,the allylic alkylation reaction, allylic amination reactions can now be carried out in high yield and selectivity and the palladium-catalyzed allylic amination reaction is now a cornerstone reaction in organic chemistry [la,19]. The palladium-catalyzed allylic amination is generally accepted to proceed via a palladium Rallyl complex 27 (Scheme 2). The E-ally1 complex intermediate 27 is formed by a nucleophilic attack on 26 by palladium and in a second step the amine attacks directly the allylic ligand leading to retention of configuration in the product 28 [19c,d]. It has been observed that the unsymmetrical allyl systems are attacked by the amine nucleophile at the less substituted carbon atom, although there have been observations of reactions on nonsymmetrical substrates with low regioselectivity.
1.2 Nucleophilic Amination of Functionalized Alkenes
9
I
Pd 26
27 \
*
/
N
R’J+A2
Pd(O), 28
Scheme 2
In the palladium-catalyzed allylic amination reaction, primary and secondary amines can be used as nucleophiles, whereas ammonia does not react. Therefore, many ammonia synthons have been developed, and a variety of protected primary ally1 amines can now be prepared using azide, sulphonamide, phthalimide, di-t-butyl iminocarbonate ((Boc),NLi), and dialkyl N-(tert-butoxycarbony1)phosphoramide anions as the nucleophile [20]. An example of the use of ((Boc),NLi) 30 as the amine nucleophile in the palladium-catalyzed allylic amination reaction is shown in Eq. (9). This reaction also illustrates the problem with the regioselectivity in the reaction as a mixture of the products 31-33 are obtained [21]. 4 mol % Pd(dba)2
-oAc 29
5.5 mol Yo diphos +
(BOC)#
Li’
*
30
(9)
31 40 %
32
33
47 %
7 Yo
10
&%ensen
One of the fascinating modem aspect of allylic amination reactions using allyl halides and allyl acetates as the substrate is to achieve the catalytic amination step in a regio-, diastereo-, and enantioselective fashion, and thus much attention has been devoted to the development of efficient chiral catalysts. Due to the wealth of the literature available on allylic amination catalyzed by chiral palladium complexes, only some representative results will be presented in the following [ 191. An example is the reaction of 1,3-diphenyl-2-propenyl acetate 34 with benzylamine 35 catalyzed by palladium(0) in the presence of the four classes chiral ligands 37-40 outlined in Scheme 3 [22-241. The mechanism for the catalytic enantioselective allylic amination reaction involving the allyl palladium complexes has been thoroughly investigated, as the complexes are often relatively easy to crystallize and, as palladium(II) is diamagnetic, the complexes may also be analyzed by standard NMR techniques [22-241. OAc Phd \ p
Pdo/L'
h
+
BnNH2
*
35
34
37 93 % yield 97 % ee
36
38
90 - 95 % yield 99 % ee
R-
Ph2P
N
Ph 39 98 % yield 94 Yoee
Scheme 3
Ph
40 99 % yield 92 % ee
1.2 Nucleophilic Amination of Functionalized Alkenes
11
The enantioselective palladium-catalyzed allylic amination reaction is highly dependent on the class of substrates, such as cyclic and acyclic substrates. It is notable that many of the ligands developed for acyclic substrates are largely inefficient on cyclic substrates. Trost et al. have succeeded in developing a ligand type based upon 2-(dipheny1phosphino)benzoicacid (DPPBA) and a chiral C,-symmetric diamine or diol which is very efficient for both acyclic and cyclic substrate types [25]. An example is the use of ligand 44 in Eq. (lo), which in combination with palladium catalyzes the reaction of racemic five- to seven-membered rings 41 with the anion of the phthalimide 42 as nucleophile to give the corresponding allyl amines 43 in good yield and high ee. The use of a bulky ammonium cation in combination with CH,Cl, as solvent is essential to obtain a high enantioselectivity. The authors suggest that a tight ion pair might be involved, and the effect of the bulky ammonium ion to be more pronounced in the less polar CH,Cl, solvents compared to THF where lower selectivity is observed and a less tight ion pair is probably present. 2.5 mol % (C3H5PdC1)2 7.5 mol % 44 * 41
42
NPhth
43
yield 84-95 % 94-90 % ee
(10)
Vinyl epoxides can also be used as substrates for formation of optically active allyl amines catalyzed by the same type of chiral palladium complexes as in Eq. (1 0). By reaction of simple vinyl epoxides with phthalimide as the nitrogen source in the presence of the chiral palladium complexes as the catalyst, very high ee (> 98 %) and regioselectivity (> 97 %) were obtained [26]. A variety of different applications of the use of the palladium-catalyzed approach for the formation of allyl amines and the use of this in total synthesis has been pursued by several research groups, and further details can be obtained in a review by Trost et al. [19d]. Ally1 amines can also be formed by desymmetrization of allyl diols with tosyl isocyanate in the presence of chiral palladium complexes [19d,27]. Trost et al., as well as others, have recently used this approach for the synthesis of natural products [28]. An approach recently developed by Katritzky et al. which also should be mentioned here, is the palladium-catalyzed reaction of N-alkylbenzotriazoles with amines, leading to an intramolecular allylic amination route to 2-vinylpyrrolidines and 2-vinylpiperidines in good yield under mild conditions [29].
12
Jergensen
The majority of the allylic amination reactions using the approach outlined in Scheme 2 are performed using palladium as the metal, and only very few reports have appeared on allylic amination promoted by metals other than palladium. A mixture of copper(II) perchlorate and metallic copper has been shown to catalyze the allylic amination of, e.g., 3-bromocyclohexene 45 by N-methyl aniline 46,giving the allylic aminated product 47 in high yield (Eq.(11)) [30]. The yields of the ally1 amines using secondary amines as nucleophiles are generally high, and a somewhat different regioselectivity compared to the palladium-catalyzed substitutions has been observed as the nucleophile has a tendency to attack at the highest substituted carbon atom of the alkene moiety.
6 45
1 eq. CU(CIO~)~ 1.2 eq. Cu(0)
+ PhNHMe 46
94 Yo
NMePh
-8 47
Iron complexes can also catalyze allylic amination [31,32]. Enders et al. have demonstrated the nucleophilic addition of various acyclic and cyclic amines to the optically active 1-methoxycarbonyl-3-methyI-(~3-allyl)-tetracarbonyliron cation 49 formed in high yield from reaction of 48 with iron carbonyls. Oxidative removal of the tetracarbonyliron group by reaction with CAN gives 50 with high optical purity and retention of the stereochemistry (Eq. (12)) [31]. The reaction proceeds well for the different amines, and has been used for the synthesis of a compound showing cytotoxic activity against diverse cell lines [3lb].
1.2 Nucleophilic Amination of Functionalized Alkenes
13
49 >95 Yo ee
48
1) RzNH 2) -CAN 91Yo 55
&OM. NRZ
50 >95 - 98 Yo ee
Evans et al. have recently demonstrated a highly enantioselective synthesis of allyl amines 52 from enantiomerically pure carbonates 51 catalyzed by rhodium complexes (Eq. (13)) [33]. The reaction proceeds with excellent regioselectivities, and the allyl amines are isolated in high yields and with a high degree of conservation of the optical purity. The scope of this reaction is demonstrated by the synthesis of, e.g., optically active nitrogen-containing heterocycles.
51
52
Allylic amination of allyl halides can also be achieved using lithium and potassium bis(trimethylsily1)amides [34] and potassium 1,1,3,3-tetramethyldisilazide[35] as the nucleophiles. It has been found that for the reaction of alkyl-substituted allyl chlorides using lithium bis(trimethylsily1)amidesas the nucleophile the allylic amination proceeds smoothly in a SN2fashion to give N,N-disilylamines in high yields when silver(1) iodide was used as an additive. Other metal complexes such as copper(1) iodide and other silver(1) salts can also be used as additives for the reaction.
14
J#rgensen
1.2.3 Electrophilic Amination of Non-Functionalized Alkenes An attractive procedure for allylic amination is the direct electrophilic amination of
alkenes. The single-step procedure allows a convenient allylic functionalization, which is an important part of this amination chemistry. However, compared to the nucleophilic amination of functionalized alkenes, the electrophilic amination of nonfunctionalized alkenes is much more complex, both from a synthetic and mechanistic point of view. The majority of direct electrophilic aminating reagents for alkenes can be divided into two subgroups (path (i) and (ii), Scheme 4). The first group consists of the nitrene precursors containing electron-withdrawing groups (EWG), which by treatment with a metal catalyst, such as copper and manganese complexes, transfers the nitrene fragment to the alkene 53. The addition is either direct to the alkene, forming an aziridine 54, or by insertion in the allylic C-H bond, forming the allyl amine 55. The aziridine 54 can undergo a thermal or metal-catalyzed rearrangement to 55 (path (i), Scheme 4). The second group of electrophilic amination reagents are aza compounds which undergo the ene reaction forming the allyl amine 57 directly via an ene-reaction transition state 56 (path (ii)) [36].
.
LH
Mn-salts
-
EWG-N LNH-EWG 55
53
J
TH - LN-EWG path (ir)
ene reaction
56
Scheme 4
57
1.2 Nucleophilic Amination of Functionalized Alkenes
15
1.2.4 Amination with Nitrene Complexes Several reagents can be used as nitrogen sources for electrophilic amination. As outlined in Scheme 4, a nitrene fragment provides the possibility of adding to an alkene leading to an aziridine, or inserting into the allylic C-H bond, forming an allyl amine. Mansuy et al. [37] have stated that by correct choice of the metal catalyst, such as the rneso-tetra-2,6-dichlorophenylporphyrinmanganese perchlorate (Mn(TDCPP)ClO,) complex, the chemoselective addition of PhI = NTs 59 to either the alkene or the allylic C-H bond of cyclohexene 58 can be controlled to give the allyl amine 60 in 70 % yield (Eq. (14)). However, the analogous reactions with other cyclic systems did not exceed 44 % yield, while the reaction with a cisalkene gave a range of isomeric products [37]. It should also be noted that Evans et al. obtained related results [38]. Generally, the manganese catalysts tend to give the allylic amination product, whereas the copper catalysts give the aziridine as the main product. The reason for this change in reaction course using different metal complexes is not yet understood. Other reagents, such as chloroamine-T trihydrate can also be used as the nitrogen fragment donor, but only moderate yield of the allyl amine was obtained [39]. Mn(TDCPP)C104
+ 58
Phl=NTs 59
5 70 rnolYo%
-
QNHTS
(14)
60
A bis(tosyl)amidoruthenium(III) complex has been prepared and characterized by X-ray analysis [40]. This complex was found to react with, e.g., cyclohexene (58) to give the allyl toluene-p-sulfonoamide, 60, in 63 % yield. Furthermore, the reaction was found to be catalytic when PhI = NTs was used as the terminal nitrogen source. Attempts to achieve asymmetric nitrene insertion reactions catalyzed by chiral transition metal complexes have also been performed [41,42]. The reaction of the nosyl-imine derivative as the nitrene donor with indane 61 catalyzed by the chiral rhodium complex 63 gave the optically active allyl amine 62 in good yield and moderate ee (Eq. (15)) [41].
16
J@rgensen
63 Phl=NNs 71 %
63
Attempts have also been made to use a combination of copper salts and bisoxazolines, and other chiral ligands, for the amination reaction using N-(p-toluenesulfony1)peroxycarbamate as the nitrogen source, but the yield and ee of the allyl amines obtained were generally low [42].
1.2.5 Amination Based on Ene-Reaction-Like Processes The properties of the nitrogen sources which determine the reaction course can sometimes be very subtle, and several compounds can transfer a nitrogen fragment. In Eq. (16) (Scheme 5), it is shown how N-tosyliminophenyliodinane59, in the presence of a manganese porphyrin as the catalyst, reacts with cyclohexene to give the allyl amine 60 by a nitrene addition reaction. The analogous sulfur reagent, 64,also facilities nitrogen transfer to alkenes; however, in this case the reaction takes place through an ene reaction-sigmatropic rearrangement process giving allyl amine 60 (Eq. (17), Scheme 5 ) [43], while the dialkyl sulfimine 65 transfers the tosyl nitrogen fragment to a molybdenum complex, forming a molybdenum nitrene complex 66, which reacts with phosphines, giving aminated phosphines 67 (Eq. (1 8), Scheme 5) [MI.
1.2 Nucleophilic Amination of Functionalized Alkenes
N.Ts
17
Mn(TDCPP)C104 nitrene addition
59
64
Me
Me
' S '
A'Ts
- DMS
*
Scheme 5
The ene reactions are in general all normal-electron demand reactions, i.e., the enophile reacts as the electrophilic partner. The highest reactivity should thus be expected to be found for enophiles with low LUMO energy, i.e., the lower in energy the LUMO is located, the more reactive is the enophile. Since the frontier molecular orbitals of the more electronegative heteroatoms such as oxygen and nitrogen are lower in energy compared to carbon, the LUMO energy of the enophile is also lower in energy compared to the LUMO energy of an alkene, which makes them more reactive in normal-electron demand ene reactions. For the same reason, substitution at either end of the enophile with an electron-withdrawing group enhances the reactivity even further.
18
J@rgensen
The regioselectivity can vary depending on the properties of the enophile (type 1 and 2, Scheme 6). It is generally observed that the nucleophilic attack by the allylic system takes place at the end of the enophile where the least electronegative atom is positioned. Thus, only nitroso and azo compounds should be attacked at the nitrogen atom (type 2), which directly gives rise to the allyl amine through the ene reaction. When selenium- or sulfur imido compounds are applied in the ene synthesis, the regioselectivity is reversed, and an intermediate “hetero” homo allyl amine is formed (type 1). This designation is used to emphasize that a homo allyl amine is formed, but that this also contains the selenium or sulfur heteroatom. The initially formed homo allyl amine undergoes a second in situ pericyclic [2,3]-sigmatropic rearrangement to give the allyl amine.
!
-
type 1 X: S=NR or S e = N c
R”
YHR e S + N R
“Hetero”homo allyl amine
J type2
X:O
or NR
X: S=NR
I
[2,3]-sigmatropic rearrangement
FNHR
@.Y Allyl amine Scheme 6
Allyl amine
1.2 Nucleophilic Amination of Functionalized Alkenes
19
1.2.5.1 Type 1 Reactions: Ene Reaction followed by [2,3]-Sigmatropic Rearrangement
As presented for the type 1 reactions in Scheme 6, selenium- and sulfur diimido compounds, 68-71, can undergo a two-step reaction sequence when treated with an allyl alkene to form the allyl amine.
68
69
70
71
This amination reaction, which is similar to the selenium dioxide-promoted allylic oxidation, was independently discovered by Kresze et al. in 1975 (sulfur imido amination) [45] and by Sharpless et al. in 1976 (sulfur and selenium imido amination) [43]. The compounds 68 and 69 were introduced first [43,45], followed by 70 [46] and 71 [47] more recently. The use of compounds 68-71 for the allylic amination reactions is attractive. These synthetic procedures proceed under mild reaction conditions and are quite selective, the biggest problem being the final deprotection. The cleavage of the nitrogen-selenium or sulfur bond can be carried out. This either occurs in situ (in the case of selenium), or by alkaline hydrolysis at room temperature (in the case of sulfur). Removal of the N-tosylate group can cause some difficulties for the first generation of amination reagents, but the recent developed alternatives for the original reagents can be deprotected easily [46,47]. Several procedures, such as Ndnaphthalene, are available for the detosylation of the amines. A milder version has been developed but requires three to four additional steps [48]. The substitution of the tosylate with the o-nitro benzenesulfonyl (nosyl, NS) is a major improvement as this group can be removed under almost neutral conditions [49]. The carbamate group can, in contrast to the tosylate group, be removed by simple alkaline hydrolysis [46a]. The use of 68-71 as amination reagents has been investigated for different types of alkenes, and the yield of allyl amines are moderate to good, depending on the substrate and the aminating agent used. The aminations normally give truns-alkenes, regardless of the configuration of the starting alkene and when disubstituted dienes are employed, the allylic amination normally proceeds with rates in the order CH, > CH, > CH. The results for the allylic amination of cyclahexene 58 with the reagents 68,68 and 71 are shown in Eq. (19). The sulfur compound 68 is generally found to give the most clean and high yielding reactions of the four reagents with the
20
J@rgensen
simple alkenes. The selenium reagents 69 and 71 are attractive, mainly because of the very simple one-pot procedure for amination and the mild and easy deprotection strategy for the nosy1derivatives, and this recent development increases the synthetic value for the latter reagent even further. The amination with the alkoxycarbonyl sulfur diimido compound 70 also proceeds well, though this reagent is not quite as reactive as the sulfonate compounds, and prolonged reaction times are often required [46a].
6
I;JHR
*-NR
68, 69,71
In situ KOH or
6
*
ene reaction [2,3]-sigmatropic rearrangement 58
72 68: yield 70 % 69: yield 51 Ye 71:yield 45 %
A few attempts have been made to perform the reaction diastereoselectively [50]. Asymmetric allylic amination of different alkenes such as methylene cyclohexane, cyclohexene, 1-heptene and cyclooctene with N,N'-bis-[N-@-tolylsulfonyl)benzenesulfonimidoyl]selenium diimide gave the allylic amides with 42 %, 34 %, 32 % and 20 % de, respectively [5Oa]. Whitesell et al. have used trans-2-phenylcyclohexanol as the chiral auxiliary which gives a very good chiral induction (Scheme 7) [50b]. The reaction proceeds well for a series of cyclic and acyclic alkenes, such as 73 which reacts with the N-sulfinylcarbamate 76 of trans-Zphenylcyclohexanol in the presence of SnC14as the Lewis acid giving the allylic product 74 in reasonable yields, and with absolute stereocontrol at both the carbon and sulfur stereocenter. The following [2,3]-sigmatropic rearrangement is promoted by silylation of the intermediary ene product giving the ally1 amine 75 in 75 % yield and with a de > 90%.
21
1.2 Nucleophilic Amination of Functionalized Alkenes
74
73
(Me&i)*NH
1
H pRBu [2,3] *RBu ~0~N.~,0SiMe3 XOKN5s\osiMe3 .. 0
0
Scheme 7
Enantioselective catalysis has also been used for the synthesis of optically active sulfimines [51]. By application of 5 mol % of the bisoxazoline-copper(1)catalyst 80, the sulfide 77 is oxidized catalytically to 78 which undergoes a [2,3]-sigmatropic rearrangement to give ally1 amine 79 in 80 % yield and with 58 % ee (Eq. (20)). Other dkenes were found to give lower ee.
22
J#rgensen
77
78
80 [2,3]-sigmatropic rearrangement 80 Yo
-
?=
NP,~, NJ
Ph
/
79 58 O h ee
1.2.5.2 Type 2 Ene Reactions The type 2 ene reactions in Scheme 6 uses the very reactive dienophiles, the azo and nitroso compounds, as the nitrogen donor fragment. The ability for these compounds to undergo the ene reaction have been known for some time [52]. Although these compounds have been known for a long time, their ene reaction chemistry has been exploited only to a very limited extent. This might be incidental, but it can also be related to problems and complexity with their chemistry (vide infra). Some of the most frequently used azo compounds for the ene reactions are 81-84, listed according to their reactivity. Compounds 83 and 84 are found to be very reactive, probably caused by extra ring tension in these compounds [53].
1.2 Nucleophilic Amination of Functionalized Alkenes Et02C,
0
CI&H2C02C,
YN
7N
<
‘C02Et
<
<
)I”
PhNFi
0
82
81
0
k N MeNFi
‘C02CH2CC13
23
0
83
84
Two examples using azo compounds in allylic amination reactions will be presented in the following. Leblanc et al. have used the more reactive trichloro derivative 82 of DEAD, 81, and found that the ene reaction proceeds at various temperatures and without any Lewis acid catalyst present, for both cyclic and acyclic alkenes to give allyl amines in good yields. The reaction of the alkene 85 with 82 gave the allylic aminated compound 86 in 85 % yield (truns:cis= 85:15) (Eq. (21)) [53fl. The allyl amine 87 was formed in good yield after treatment with a suspension of zinc powder in acetic acid solution.
-
CC13CH202C, N
+
OAC
N\
C02CH2CC13
85
-
82
V
O
A
c
85 % CC13CH202CN‘NHCO~CH~CCI~ 86 trans:cis = 85:15
1 ) Zn,HOAc 2)Ac2O 89 Yo
VoA (21)
* NHAc
a7
The allylic amination reaction using aza compounds can also be promoted by Lewis acids. The reaction of between different alkenes and DEAD 81 can be catalyzed by a stoichiometic amount of SnCl,, giving yields and selectivities of the allyl-aminated products which are comparable to those of the thermal reactions [53g]. The reaction of 1-pentene 88 with DEAD 81 outlined in Eq. (22) gives the ene adduct 89 in 87 % yield (truns:cis = 11 :1). In order to preserve the alkene functionality, the nitrogen-nitrogen bond was cleavage by lithium in liquid ammonia, giving allyl amine 90 in good yield.
24
JQrgensen
88
89 trans:cis = 11:I
81
Li, liq. NHs
*
(22)
F
NHC02Et
86 % 90
Heathcook et al. have performed a diastereoselective aza-ene reaction using chiral di-(+)-menthy1 diazenedicarboxylate 91 as the nitrogen source [54]. Compound 91 was found to react with various alkenes in the presence of 2 equiv. SnCl,, and the corresponding allylic aminated product was obtained in good yield and with de up to 42 %. The problem with this approach was the removal of the chiral menthyl ester auxiliary, which was found to be rather difficult.
The most reactive electrophiles for the ene reactions are probably the nitroso compounds, as even nonactivated aliphatic nitroso compounds have been reported to undergo the ene reaction at room temperature [55]. Some nitroso compounds which have been applied in ene reactions are depicted in 92-97 [52b,56]. One of the most reactive electrophiles 97 is normally made in situ because of the extremely high reactivity, but the other nitroso compounds are reasonably stable.
1.2 Nucleophilic Amination of Functionalized Alkenes
92
93
94
95
96
25
97
The reaction of nitroso compounds with alkenes can give a variety of products, depending on the nature of the alkene. If the alkene is a diene, a Diels -Alder reaction between the nitroso compound and diene is normally observed [56,57]. A competing reaction to the Diels- Alder reaction for nitroso compounds is the ene reaction. However, the products obtained by the two routes are very different. The Diels-Alder products are quite stable, whereas many ene products tend to undergo further in situ transformations. Among them are oxidations, decompositions, disproportionations, while other reactions of the intermediate hydroxylamine can give nitroxides, nitrones, hydroxylamines, azoxy compounds, and amines. All types of products can be observed in a typical ene reaction with, e.g., nitrosobenzene. The exact mechanism for the different transformations is unknown, but many of them might involve radical reactions [56fJ .The various transformations that a hydroxylamine may undergo, might explain some of the problems encountered in this type of chemistry. It is worth noting that ene products derived from nitroso compounds with electronwithdrawing substituents on the a-carbon are relatively stable. The main reason for this is that they most likely are not oxidized as easily to nitroxides, as the ene products from nitrosobenzene [56e-g, 581. Schenk et al. have used the a-chloro nitroso compound 93 for the reaction with cyclopentene 98 in order to solve the problem with the instability of the ally1 amine product formed from the reaction with nitroso compounds [56c]. The product formed, 99, rearranges to the stable nitrone hydrochloride salt 100, which is easily hydrolyzed to the hydroxylamine 101 (Eq. (23)).
26
J#rgensen
93
98
99
100
101
The same principle was also been used by Kresse et al. for the diastereoselective ene reaction of sugar derivatives with various alkenes [56b,d]. The application of the two optically active nitroso sugar compounds 102 and 103 for the reaction with cyclopentene gave, after removal of the sugar moiety, the optically active hydoxylamines in good yield, and with high ee. The ene reactions with other alkenes were in general high-yielding, and as an alternative to the hydrolytic work-up, in situ reduction was also carried out and stable ally1 amines were isolated.
102
103
Keck et al. have used a very reactive nitroso compounds with a carbonyl groups attached to the nitrogen atom (97) such as the nitroso carbonylmethane equivalent 105 for the allylic amination alkenes [59]. The use of 105 (97)has several advantages, and the problems with regard to decomposition of the products are partly overcome. The products are quite stable, and at the same time these substituents increase the reactivity of the aminating reagent. The reaction of 1-methyl-cyclohexene 104 with 105 gives the allylic aminated product 106 in 92 % yield (Eq. (24)).
1.2 Nucleophilic Amination of Functionalized Alkenes
27
(24) anthracene 92 % 105
104
106
1.2.6 Allylic Amination with Ar-NX and a Metal Catalyst Sharpless et al. and Muccigrosso et al. were probably the first to perForm the direct allylic amination of nonfunctionalized alkenes in the presence of a metal complex [60]. The complex used for the allylic amination was the molibdooscaziridine 109 prepared by reaction of the molybdenum dioxo complex 107 and phenyl hydroxylamine 108 (Eq. (25)).
-
(25)
+ PhNHOH -H20 0
94 %
HMPA
107
108
0
HMPA 109
Sharpless et al. found that heating a solution of 109 with 2-methyl-2-hexene 110 afforded an allylic amination reaction leading to the formation of 111 in 57 % yield together with high yields of the parent molybdenum dioxo complex 107 (Eq. (26)).
109
110
111
28
J#rgensen
By the application of the molybdenum dioxo complex 107 as a catalyst (10 mol %), Nicholas et al. later developed the allylic amination reaction (Eq. (26)) into a catalytic reaction using phenyl hydroxylamine 108 as the nitrogen fragment donor [61]. Reaction of different alkenes with 108 in the presence of 107 as the catalyst leads to the formation of the corresponding allyl amines in low to moderate yield (4-52 %), together with various phenyl hydroxylamine-derived by products. Mechanistic investigations of the allylic amination reaction catalyzed by 107 using 108 as a nitrogen donor were performed using kinetics, trapping experiments, and model reactions, and these led to the proposal that the reaction is an of-metal process, which means that the metal is not involved in the amination step [62]. It was suggested that the molybdenum catalyst serves as a molybdenum(VI)/molybdenum(IV)redox shuttle, and the mechanism is outlined in Scheme 8. The first step is proposed to be an oxidation of the hydroxylamine to the corresponding nitroso compound with a concomitant reduction of the metal complex. The next step is an ene reaction leading to the hydroxylamine, which is reduced to the allyl amine giving the metal complex in an oxidized state. The function of the metal is then solely to be a redox catalyst, and the nitroso compound is liberated from the molibdooxaziridine 109 before it undergoes an ene reaction [63].
VIo ,
H //"vN-ph
IV hMo
1
ene reaction
reduction
Scheme 8
A variety of different metal complexes have been screened as catalysts for allylic amination using phenyl hydroxylamine 108 as the nitrogen fragment donor, and it was found that iron-complexeshave better redox capacity compared to molybdenum [ a ] . With the iron compounds, higher yields and a lower amount of hydroxylaminederived byproducts are obtained. These byproducts constitute one of the problems in this type of allylic amination reactions in general, as their formation is difficult to suppress. The allylic amination reaction of a-methyl styrene 112 with 108 can, e.g., be catalyzed by the molybdenum dioxo complex 107, iron phthalocyanine 114, or by the combination of the iron chlorides 115 [64,65]. It appears from the results in
1.2 Nucleophilic Amination of Functionalized Alkenes
29
Scheme 9 that both the molybdenum and iron complexes can catalyze the allylic amination of nonfunctionalized alkenes with an ene-like transposition of the double bond, but also that the yield of the allyl amine formed, 113, is moderate to high. It is generally found that higher substituted alkenes tend to give the best yields, and unsymmetrical alkenes (trisubstituted) react with virtually complete regioselectivity, as only one isomer is detected. The byproducts are primarily azoxybenzene and aniline, which arise from condensation of nitrosobenzene with phenyl hydroxylamine and reduction of phenyl hydroxylamine, respectively.
php +
PhNHOH
112
c
Cat 10 mol Yo
108
,YPh 113
0
6
FeCI2+ FeC13 (9:l)
HMPA
107 42 Yoyield
114 76 O h yield
115 41 %yield
Scheme 9
The mechanism of the iron phthalocyanine 114-catalyzed reaction is probably similar to that outlined previously in Scheme 8 [66]. Every single step of the cycle in Scheme 8 has been shown to be feasible, and in particular the oxidation and reduction of the hydroxylamines. It was proposed that the allylic amination catalyzed by 114 is an ofS-metal process, but an on-metal transfer was not excluded. Nicholas et al. have found evidence for an on-metal nitrogen fragment transfer in the iron(I1) and iron(II1) chloride-catalyzed reactions, i.e., that the nitroso moiety and/or alkene is coordinated to the metal during the ene reaction [64b-d,65]. They were able to isolate and characterize by X-ray analysis the catalytic intermediate, 116 (Scheme lo), which provides a good argument for an on-metal reaction [64c, 651. The structure of 116 is the first example of a metal complex having an azodioxide ligand, but even more importantly, 116is an amination catalyst (Scheme 10). Complex 116 can aminate 2-methyl-2-pentene 117, leading to the allyl amine 118 in 83 % yield. Furthermore, 116 can catalyze the reaction of phenyl hydroxylamine 108 with 117, giving 118. Evidence for an on-metal transfer comes from several experi-
30
J@gensen
ments, such as a competition experiment between the allylic amination of 117 and 2,3-dimethyl- 1,3-butadiene 119 and the hetero-Diels-Alder reaction of 119 using 116. In these experiments no hetero-Diels- Alder product was observed, but instead 118 and 120, in a ratio of 3:7. It should be noted that reaction of nitrosobenzene with 119 gives the hetero-Diels-Alder product. Finally, treatment of the 116 with p methyl nitrosobenzene 121 liberates nitrosobenzene 94.
PhNHOH 108
/
'18
I
117 117
/
pMeC&l4NO 121
Ph 116
x\r 119
PhNO 94
1 20
Scheme 10
118
1.2 Nucleophilic Amination of Functionalized Alkenes
31
Further evidence for the involvement of 116 in the amination reaction comes from the isolation of the related alkene complex 122 which by heating in dioxane solution gives allyl amine 117 (Eq. (28)). The latter results for the iron chlorides indicate an on-metal process with the ene reaction taking place in the sphere of the iron center, with both the nitroso and alkene compound coordinated to the sphere of the metal [64c,d].
Ph
\
-lo
00
' NPh /
-NPh
0
2 FeCI4
Ph 122
117
Postulated structure (IR, NMR and UV-vis)
Ally1 amines can also be formed in an oxidative environment. Nicholas et al. have shown that instead of phenyl hydroxylamine as the nitrogen donor, it is possible using t-BuOOH as the terminal oxidant and the molybdenum catalyst described above [65]. The procedure is analogues to the in situ hetero-Diels- Alder reaction of nitroso compounds developed earlier by others [MI. Cenini et al. have shown that the allylic amination reaction can be camed out under reductive conditions with aromatic nitro compounds 123 as nitrogen fragment donor. A ruthenium complex derived from 125 and Ru3(CO),, is used as the catalyst and carbon monoxide as the reductant (Eq. (28)) [68]. At 40 bar pressure of CO at 160 "C, the allyl amine 124, derived from the cyclohexene 58 was detected in up to 82 % yield [68]. The byproduct from the reaction is aniline. The reaction has been studied in detail from a mechanistic point of view, in an attempt to obtain insight into the mechanism and to optimize the reaction conditions [68b]. It was found that aromatic nitro compounds with electron-withdrawing substituents gave the highest yield of the allyl amine 124. The reaction can also be performed for other alkenes and up 57 % selectivity for cyclooctene was found for a nitro arene conversion of 8 1 %. On the basis of kinetic experiments, several mechanistic aspects of the reaction were discussed, and it was postulated that a coupling between a co-ordinated nitroso arene and a coordinated alkene is probably responsible for the carbon-nitrogen bond formation.
32
J@rgensen
0' 58
2 mol % R u ~ ( C O ) , ~ 6 mot YO125 ArN02
26 - 82 "/a
123
124
125 (R = H, CH3, OCH3, Cl)
The use of nitro arenes as the nitrogen fragment donor in combination with CO under catalytic, and reductive, conditions has also been presented by Nicholas et al. who have found that [CpFe(CO)2]2can be used as the catalyst [69]. A variety of different alkenes were tested, and a-methyl styrene gave the highest yield of the allyl amine 113 when nitrobenzene was used. The yield of the allyl amine depends markedly on the structure of both the alkene and the nitro compounds.
1.3 Summary The chapter has tried to cover modem aspects of allylic amination reactions. Allylic amination reactions starting from compounds having an allylic C -X (heteroatom, halide) functionality have been highly developed to also include enantioselective reactions leading to allyl amines with high enantiomeric excess. The approach for formation of allyl amines using alkenes having allylic C-H bonds as the substrate is a relatively new field, and the majority of the work done in this field has been devoted to the development of the reactions. An important future aspect for the latter type of reactions is the development of reactions for alkenes which reacts with nitrogen-fragment donors in the presence of, e.g., chiral catalyst leading to optically active allyl amines.
References
33
Acknowledgments The author wishes to thank The Danish National Research Foundation for financial support.
References [ l ] For reviews including allylic amination reactions, see e.g.: a) B. M. Trost, Angew. Chem. 1989,101, 1199; b) T. E. Miiller, M. Beller Chem. Rev. 1998,98,675; c) M. Johannsen, K. A. J~rgensen,Chem. Rev. 1998, 98, 1689. [2] R. B. Cheikh, R. Chaabouni, A. Lament, P. Mison, A. Nafti, Synthesis 1983, 685. [3] 0. Mitsunobu, Synthesis 1981, 1. [4] S. E. Sen, S. L. Roach, Synthesis 1995, 756. [5] H. Loibner, E. Zbiral, Helv. Chim. Acta 1976, 59, 2100. [6] For an example of partial rearrangement see e.g.: J. Mulzer, G. Funk, Synthesis 1995, 101. [7] a) L. E. Overman, J. Am. Chem. SOC.1976,98,2901;b) L. A. Clizbe, L. E. Overman, Org.Synth. 1978, 58, 4. [8] M. Calter, T. K. Hollis, L. E. Overman, J. Ziller, G. G. Zipp, J. Org. Chem. 1997, 62, 1449. [9] L. E. Overman, G. G. Zipp, J. Org. Chem. 1997, 62, 2288. [lo] a) Y. Donde, L. E. Overman, J. Am. Chem. SOC. 1999, 121, 2933; b) F. Cohen, L. E. Overman, Tetrahedron: Asymmetry 1998, 9, 3213. [ 111 See e.g.: a) Y.Jiand, J. M. Longmire, X. Zhang, Tetrahedron Lett. 1999.40, 1449; b) Y. Uozumi, K. Kato, T. Hayashi, Tetrahedron: Asymmetry 1998, 9, 1065. [12] P. Metz, C. Mues, A. Schoop, Tetrahedron 1992, 48, 1071. [ 131 See e. g. a) H. Imogdi, Y. Petit, M. Larchevbque, Tetrahedron Lett. 1996,37,2573; b) A. M. Doherty, B. E. Kornberg, M. D. Reily, J. Org.Chem. 1993,58,795;c) M. Mehmandoust, Y. Petit, M. Larchevbque, Tetrahedron Lett. 1992, 33, 4313; d) T. Eguchi, T. Koudate, K. Kakinuma, Tetrahedron 1993, 49, 4527; e) N. Chida, J. Takeoka, N. Tsutsumi, S. Ogawa J. Chem. SOC.,Chem. Commun. 1995, 793; f) M. Isobe, Y. Fukuda, T. Nishikawa, P. Chabert, T. Kawai, T. Goto, Tetrahedron Lett. 1990,31, 3327; g) M. M. Campbell, A. J. Floyd, T. Lewis, M. F. Mahon, R. J. Ogilvie, Tetrahedron Lett. 1989, 30, 1993; h) S. Danishefsky, J. Y. Lee, J. Am. Chem. SOC.1989, 111,4829. [14] M. S. Gibson, R. W. Bradshaw, Angew. Chem. 1968, 80,986. [ 151 a) J. 0. Osby, M. G. Martin, B. Ganem, Tetrahedron Lett. 1984.25.2093; b) T. Sasaki, K. Mnamoto, H. Itoh, J. Org. Chem. 1978,43, 2320. [ 161 a) A. Koziara, A. Zwierzak, Tetrahedron 1976.32, 1649; b) A. Zwierzak Synthesis 1982,920; c) A. Zwierzak, S. Pilichowska, Synthesis 1982, 922. [ 171 R. A. T. M. van Benthem, J. J. Michels, H. Hiemstra, W. N. Speckamp, Synlett 1994, 368. [I81 M. Morikawa, J. Takahashi, J. Tsuji, Tetrahedron Lett. 1965, 6, 4387. [19] See e.g.: a) S. A. Godleski In Comprehensive Organic Synthesis; 1 ed.; M. F. Semmelhack, Ed.; Pergarnon Press: New York, 1991; Vol. 4; p 585; b) J. P. Collman, L. S. Hegedus, J. R. Norton, R. G. Finke, Principles and Applications of Organotransition Metal Chemistry; 2 ed.; University Science Books: Mill Valley, 1987, c) T. Hayashi In Catalytic Asymmetric Synthesis; I. Ojima, Ed.; VCH Verlagsgesellschaft: Weinheim, 1993; p 325; d) B. M. Trost, D. L. Van Vranken, Chem. Rev. 1996, 96, 395. [20] a) R. 0. Hutchins, J. Wei, S. J. Rao, J. Org. Chem. 1994.59.4007, b) R. Jumnach, J. M. J. Williams, A. C. Williams, Tetrahedroy Lett. 1993, 34, 6619. [21] R. D. Connell, T. Rein, B. Akermark, P. Helquist, J. Org. Chem. 1988, 53, 3845. [22] See e.g.: a) T. Hayashi, A. Yamamoto, Y. Ito, E. Nishioka, H. Miura, K. Yanagi, J. Am. Chem. SOC. 1989,111,6301;b) A. Togni, U. Burckhardt, V. Gramlich, P. S. Pregosin, R. Salzmann, J. Am. Chem. SOC.1996, 118, 1031; c) U. Burckhardt, M. Baumann, G. Trabesinger, V. Gramlich, A. Togni, Organometallics 1997, 16, 5252; d) P. E. Blochl, A. Togni, Organometallics 1996, 15, 4125.
34
J@rgensen
[23] (a) J. Sprinz, M. Kiefer, G. Helmchen, M. Reggelin, G. Huttner, 0. Walter, L. Zsolnai Tetrahedron Lett. 1994,35, 1523; b) H. Steinhagen, M. Reggelin, G. Helmchen, Angew. Chem, In?. Ed. Engl. 1997,36, 2108. [241 K. Selvakumar, M. Valentini, M. Worle, P. S. Pregosin, Organometdlics 1999, 18, 1207. [25] a) B. M. Trost, R. C. Bunt, J. A m Chem. SOC. 1994,116,4089; b) B. M. Trost, R. Radinov, J. Am. Chem. SOC. 1997, 119, 5962. [26] B. M. Trost, R. C. Bunt, Angew. Chem., Znt. Ed. Engl. 1996, 35, 99. [27] S.-g. Li, C. W. Lim, C. E. Song, K. M.Kim, C. H. Jun, J. Org.Chem. 1999, 64, 4445. [28] See e.g.: a) B. M. Trost, D. L. Van Vranken, J. Am. Chem. SOC. 1993, 115, 444;b) M. Mori, S. Kuroda, C.3. Zhang, S. Kato, J. Org. Chem 1997, 62, 3263. [29] A. R. Katritzky, J. Yao, B. Yang, J. Org. Chem. 1999.64, 6066. [30] J. B. Baruah, A. G. Samuelson, Tetrahedron 1991, 47, 9449. [31] a) D. Enders, M. Finkam, Synlett 1993,401; b) D. Enders, B. Jandeleit, S. von Berg, SynZett 1997, 421. [32] G. S. Silverman, S. Strickland, K. M. Nicholas, Organornetallics 1986. 5, 2117. [33] F? A. Evans, J. E. Robinson, J. D. Nielsen, J. Am. Chem SOC.1999, 121, 6761. [34] a) T. Murai, M. Yamamoto, S. Kondo, S. Kato, J. Org.Chem. 1993,58,7440, b) J. Briining, Tetrahedron Lett. 1997, 38, 3187. [35] S. Itsuno, T. Koizumi, C. Okumura, K. Ito, Synthesis 1995, 150. [36] R. M. Borzilleri, S. M. Weinreb, Synthesis 1995, 347. [37] a) D. Mansuy, Pure Appl. Chem. 1990,62,741, b) J. P. Mahy, G. Bedi, Battioni, D. Mansuy, Tetrahedron Lett. 1988, 29, 1927. [38] D. A. Evans, M. M. Fad, M. T. Bilodeau, J. A m Chem. SOC.1994, 116,2742. [39] D. A. Albome, P. S. Aujla, P. C. Taylor, S. Challenger, A. M. Derrick, J. Org.Chem. 1998.63.9569. [40] S.-M. Au, S.-B. Zhang, W.-H. Fung, W.-Y. Yu, C.-M. Che, K,-K. Cheung, Chem Commun. 1998, 2677. [41] a) P. Miiller, C. Baud, Y.Jacquier, M. Moran, I. Nageli, J. Phys. Org. Chem. 1996,9,341; b) 1. Nageli, C. Baud, G. Bernardinelli, Y.Jacquier, M. Moran, P. Miiller, Helv. Chim. Actu 1997, 80, 1087. [42] Y. Kohumura, K.4. Kawasaki, T. Katsuki, Synlen 1997, 1456. I431 a) K. B. Sharpless, T. Hori, J. Org. Chem. 1976,41,176;b) K. B. Sharpless, T. Hori, L. K. Truesdale, C. 0. Dietrich, J. Am. Chem. SOC. 1976,98, 269. [44]E. W. Harlan, R. H.Holm, J. Am. Chem. SOC. 1990, 112, 186. [45] N. Schonberger, G. Kresze, Liebigs Ann. Chem. 1975, 1725. [46] a) G. Kresze;H. Miinsterer, J. Orgy Chem. 1983,48,3561; b) T. J. Katz, S. Shi,J. Org. Chem. 1994, 59, 8297. [47] M. Bruncko, T.-A. V. Khuong, K. B. Sharpless, Angew. Chem., Znt. Ed. Engl. 1996,35, 454. [48] S. P. Singer, K. B. Sharpless, J. Org. Chem 1978, 43, 1448. [49] T. Fukuyama, C.-K. Jow, M. Cheung, Tetrahedron Lett. 1995, 36, 6373. [50] a) S. Tsushima, Y.Yamada, T. Onami, K. Oshima, M. 0. Chaney, N. D. Jones, J. K. Swartzendruber Bull. Chem. SOC.Jpn 1989,62, 1167; b) J. K. Whitesell, H. K. Yaser, J. Am. Chem. SOC. 1991,113, 3526. [51] Y. Nishibayashi, T. Chiba, K. Ohe, S. Uemura, J. Chem. SOC., Chem. Commun. 1995, 1243. [52] a) K. Alder, F. Pascher, A. Schmitz, Chem. Ber: 1943,76,27; b) G. T. Knight, B. Pepper, Tetrahedron 1971, 27, 6201. [53] a) W. J. Kinart, J. Chem. Res. 1994,486;b) A. G. Davies, W. J. Kinart,J. Chem. SOC.,Perkin Trans.2 1993,2281; c) R. Huisgen H. Pohl, Chem. Be,: 1960.93.527; d) T. R. Hoye, K. J. Bottorff, A. J. Caruso J. F. Dellaria, J. Org. Chem. 1980,45,4287;e) W. A. Thaler, B. Franzus, J. Org.Chem. 1964, 29, 2226; f) Y. Leblanc, R. Zamboni, M. A. Bernstein, J. Org. Chem. 1991, 56, 1971; g) M. A. Brimble, C. H. Heathcock, J. Org. Chem. 1993, 58,5261. [54] M. A. Brimble, C. H. Heathcock, G. N. Nobin, Tetrahedron: Asymmetry 1996, 7, 2007. [55] W. B. Motherwell, J. S . Roberts, 1. Chem. SOC., Chem. Commun.1972, 329. [56] a) C. A. Seymour, F. D. Greene, J. Org. Chem. 1982,47,5226; b) H. Braun, Felber, G. Krek, A. Ritter, F. P. Schmidtchen, A. Schneider, Tetrahedron 1991, 47, 3313; c) C. Schenk, T. J. de Boer, Tetrahedron 1979, 35, 147; d) G. KreBe, A. Vasella, H. Felber, A. Ritter, B. Ascherl, Red. Trav. Chim. Pays-Bas 1986, 105, 295; e) M. G. Barlow, R. N. Haszeldine, K. W. Murray, J. Chem. SOC., Perkin Trans. I 1980,1960, f) P. Zuman, B. Shah Chem. Rev. 1994,94,1621; g) R. A. Abramovitch, S. R. Challand, Y. Yamada, J. Org.Chem.1975, 40, 1541.
References
35
[57] a) J. Hamer, M. Ahmad In 1,4 Cycloaddirion Reactions; J. Harner, Ed.; Academic Press: New York, 1967; pp 419; b) H. Waldrnann, Synthesis 1994,535. [58] a) G. T. Knight, J. Chem. SOC., Chem. Commun.1970,1016; b) G. E. Keck, R. R. Webb, J. B. Yates, Tetrahedron 1981, 37, 4007. [59] a) G. E. Keck, J. B. Yates, Tetrahedronk r r . 1979,20,4627; b) G. E. Keck, R. R. Webb, J. Am. Chem. SOC. 1981, 103, 3173. [60] a) S. L. Liebeskind, K. B. Sharpless, R. D. Wilson, J. A. Ibers, J. Am. Chem. SOC.1978,100,7061; b) D. A. Muccigrosso, S. E. Jacobsen, P. A. Apgar, F. Mares, J. Am. Chem. SOC. 1978, 100, 7063. [61] S . Srivastava, Y. Ma, R. Pankayatselvan, W. Dinges, K. M. Nicholas, J. Chem. Soc., Chem. Commun. 1992, 853. (621 R. S. Srivastava, K. M. Nicholas, J. Org. Chem. 1994, 59, 5365. [63] E. R. Mgller, K. A. JPrgensen, J. Am. Chem. SOC. 1993, 115, 11814. (643 a) M. Johannsen, K. A. J~rgensen,J. Org. Chem. 1994,59,214; b) R. S. Srivastava, K. M. Nicholas Tetrahedron Left 1994,35,8739; c) R. S . Srivastava, K. M. Nicholas, J. Am. Chem. SOC.1997,119, 3302; d) R. S. Srivastava, M. A. Khan, K. M. Nicholas, J. Am. Chem. SOC.1996, 118,3311; e) S.
Saaby, K. A. J~rgensen,unpublished results. R. S. Srivastava, K. M. Nicholas, J. Chem. SOC., Chem. Commun. 1996, 2335. M. Johannsen, K. A. Jsrgensen, J. 0%.Chem. 1995, 60, 5979. E. R. Moller, K. A. Jergensen, J. 0%.Chem. 1996, 61, 5770. a) S. Cenini, F. Ragaini, S . Tollari, D. Paone, J. Am. Chem. SOC.1996, 118, 11964; b) F. Ragaini, S. Cenini, S. Tollari, G. Tummolillo, R. Bertrami, Orgunometullics 1999, 18, 928. [69] R. S.Srinastava, K. Nicholas, Chem. Commun. 1998, 2705.
[65] [66] 1671 [68]
Modern Amination Mefhods Edited by Alfredo Ricci copyright 0 WILEY-VCH Verlag GmbH, 2wO
2 Electrophilic Amination Routes from Alkenes Elena Fernandez and John M. Brown
2.1 Introduction Considering the potential importance of amine synthesis, and the ready availability of alkene precursors, there is a surprising lack of literature on their direct or indirect amination. The probable reasons for this are threefold: firstly the ease of synthesis of amines by routes from carbonyl precursors; secondly, the synthetic difficulties associated with the direct amination of alkenes; and thirdly the lack of good general reagents and protocols for the indirect amination of organometallics derived from alkenes. This last area is moving rapidly, however. This article reviews progress and the steps being taken to circumvent or remove these limitations. It will focus mainly on hydroboration of alkenes as the initial route to amination precursors, with some discussion of relevant results derived from hydrozirconation. The discussion will be limited to the formation of a single C-N bond to the unsaturated precursor, and hence will not include the aziridination of alkenes. Cycloaddition reactions also fall outside the mandate of the Chapter. For completeness, the background in nonasymmetric reactions will be discussed as appropriate to provide an appropriate focus for asymmetric synthesis.
2.2 Indirect Stoichiometric Amination Within the past 20 years, hydroboration of alkenes coupled to transformations of the first-formed organoboranes has become one of the central methods of organic synthesis [ 1,2]. A particular reason has been the high regio- and chemoselectivity which may be imparted in the initial hydroboration step, coupled with the stereochemical integrity of the subsequent C-X bond-forming stage. An interesting example is the formation of carbon-nitrogen bonds from organoboranes as a simple and convenient route for the synthesis of amines, long of great interest due to their physiological activity and their potential as organic intermediates.
38
Fernandez and Brown
Herein is described how organoboron and additionally organozirconium compounds have proved to be valuable precursors to a variety of amines via hydroboration-amination, or less frequently hydrozirconation-amination.
2.2.1 Amination via Organoboron Compounds The addition of borane to alkenes was first reported by H. C. Brown et al. [3] in 1956. The anti-Markovnikov insertion of an unsaturated moiety into a B-H bond of the borane (R,BH, RBH, and BH,) proved to be the initial step for introduction of a very wide variety of functional groups. Within the following decade, the same author described the replacement of a boron atom by an amino group, affording a synthetic route from alkenes to amines [4](Scheme 1).
Scheme 1
Organoboranesare modest Lewis acids that react easily with a variety of neutral or negatively charged bases to form thermally stable adducts, because of the formal pvacancy on boron. Hence, the addition to alkenes may be considered to be driven by initial association of the alkene with the vacant p-orbital on boron, followed by a hydride transfer within the ensuing complex. This mechanism has been the subject of computational studies, and provides a working model for the reaction mechanism in accord with the observed selectivities [5].This cannot be the complete picture, since the employment of a borane co-ordinated to an enantiomerically pure base leads to a discernable e.e. in the product [6]. The normal synthetic pathway for hydroboration is reaction with an ambiphilic nucleophile of which the simplest example is hydroperoxide ion. This elicits a 1,2-migrationof an alkyl group from boron to oxygen with concurrent loss of hydroxide ion. The step occurs with essentially complete retention of configuration. In similar vein, ambiphilic species with the structure NH,X may be used in amination, so that the overall reaction is an addition of ammonia to the alkene with the regio- and chemoselectivity driven by the hydroboration step. A majority of reactions of organoboranes can be rationalized in terms of these ionic mechanistic pathways, or closely related protocols (Scheme 2).
2.2 Indirect Stoichiometric Amination
39
Scheme 2
An example is provided by the formation of pure trans-2-methylcyclohexylamine by a simple sequence, as illustrated in Scheme 3.
Scheme 3
The nature of the aminating reagent employed to afford the corresponding amine via an organoborane is important. Initially the nitrogen analogs of hydrogen peroxide were used as aminating reagents, i.e., hydroxylamine and hydrazine (with reference to the efficient and quantitative oxidation process of organoboranes by alkaline hydrogen peroxide), but organoboranes merely formed simple addition compounds with these bases, giving no further reaction [7] (Scheme 4).
Scheme 4
Intramolecular 1,2-migration readily took place when the base used as aminating agent was chloramine [4,8], chloramine generated in situ from sodium hypochlorite and ammonium hydroxide [9], hydroxylamine-O-sulphonicacid [7,10,11], O-mesitylenesulfonylhydroxyl-amine[ 121, azide salts [ 13,141, or other related reagents [15], all which have in common a potentially good leaving group in the borane adduct. The transfer of one of the three alkyl groups would be expected to be fol-
40
Femandez and Brown
lowed by a second similar reaction of the first-formed dialkylborinate derivative, e.g., R,B(NHR) or its hydrolysis product, by reaction with a second mole of the aminating reagent, and indeed this could be observed in practice. No further reaction could be observed after the formation of RB(NHR), due to the low electrophilicityof the organo-bis(amino)borane. These migration reactions are sensitive to both steric and electronic factors so that, at best, only two of the three alkyl groups of the borane can be utilised. This potential synthetic limitation can be overcome by using mixed organoboranes, RR’,B, in which group R derived from the original borane shows a significantly greater migratory aptitude than R’ [7]. It has been demonstrated that the methyl group of organodimethylboranesis particularly resistant to migration from boron to carbon [ 16- 181, which makes Rh4e,B (or R,BMe) a suitable organoboraneintermediate for conversion of the R-component into functional products. Furthermore, the organodimethylboranesare readily available by adding dimethylborane to alkenes [9,19-211, and any small amount of methylamine produced can be easily eliminated under the experimental conditions (Scheme 5). LiMe2BH2 R%
Tb Me3SiCi -B*~
i) H2NOSQH ii) hydrolysis
R/\/NH2
9
MeGiH LiCl
Scheme 5
Finally, to ensure a quantitative yield (> 90 %) of the amine, an excess of aminating reagent is required. Also, a systematic study of the influence of the solvent on the hydroboration - amination reaction has shown that in diethyl ether the reaction is slow, in diglyme the isolation of amines can prove rather difficult, and in tetrahydrofuran - although the aminating reagent hydroxylamine-0-sulfonic acid is insoluble - the reaction is mildly exothermic and results in a clear solution at the end of the reaction which makes the THF the solvent of choice [7].Thus, the in situ amination reaction is a straightforwardand inexpensive method for converting alkenes into the corresponding cyclic, acyclic, chiral, hindered, primary, secondary, or tertiary amines.
2.2 Indirect Stoichiometric Arnination
41
2.2.1.1 Applications to the Synthesis of Primary Amines Dimethylborane has been used to hydroborate alkenes regiospecifically. The resulting dimethylalkylborane reacted with ammonium hydroxide and sodium hypochlorite (generation of NH,C1 in situ) to yield isomerically pure alkylamines [21] (Table 2.1). Table 2.1 Stoichiomemc hydroboration - amination of alkenes Alkene
Product ~
N
Yield (%)a
Regioselectivity (%)
61 H
~ > 99
rNH2 &NH2
a
62
90
56
> 99
61
> 99
Isolated yield based on dimethylalkylborane.
Electrophilic aromatic substitution is also possible from triphenylborane [ 111 (readily accessible by reacting boron trifluoride with phenylmagnesium bromide in anhydrous ether) [22] (Scheme 6).
BF3.0Et2
+
3PhMgBr
-
i) H2NOS03H ii) hydrolysis Ph3B Ph2BOH
Scheme 6
42
Femndez and Brown
The mild reaction conditions make the amination via organoboranes a suitable method for preparing functionally substituted amines. Thus, 3-(p-tolylthio)-2methyl-1-propene is readily converted into the corresponding amine in a one-pot synthesis [9] (Scheme 7). i)BH3 ii) NH40H I NaOCl
iii) Hydrolysis
Scheme 7
Interestingly, hydroboration- amination as an isotope incorporation methodology has led to the synthesis of isomerically pure I3N- and "N-labeled primary amines from labeled ammonia [23-251 (Scheme 8). These labeled amines are valuable intermediates in pharmacology.
Scheme 8
N-trimethylsilyl protected olefinic amines and terminal diolefins have been successfully hydroborated with dimethylborane. The resulting organoborane was treated with in situ-generated chloramine or chloralkylamine to produce isomerically pure diamines or N-substituted unsymmetrical diamines in good yields [26] (Scheme 9).
2.2 Indirect Stoichiometric Amination Me2BH
#N(SiMe&
-
Me2BeN(SiMe&
I
I
i) NH3 I NaOCl ii) Hydrolysis
43
i) CH3CH2CH2NH2 I NaOCl ii) Hydrolysis
u '
i) NH3 I NaOCl ii) Hydrolysis
CHsNH2 I
Trialkylboranes also react rapidly at low temperatures with lithium r-butyl-N-tosyloxycarbamate [27] or N-chloro-N-sodiocarbamate[28] to give the corresponding N-Boc-protected primary amines and N-alkylcarbamates (Scheme 10).
RNHBoc *
LiN(0Ts)Boc
R-B,
/
NaNCICOZEt
*
RNHC02Et
up to 88 % yield
up to 83 % yield Scheme 10
Similarly, N-@-toluenesulfony1)-protected primary amines have been prepared using two different protocols, via hydroboration - amination with chloramine-T [29] (MeC6H,S0,NClNa) or with [N-@-toluenesulfonyl)imino]phenyliodinane [30], in excellent yields (Scheme 11).
RNHTs
*
up to 84 % yield
NaNClTs
R-6,
/
Phl=NTs
*
RNHTs
up to 99 % yield
Scheme 11
Hydrazoic acid, HN, can be generated either from sodium azide and an aqueous acid [ 141or from trimethylsilyl azide and MeOH [3 11, and its application leads to the formation of primary amines in good to excellent yields [32] (Scheme 12).
44
Femandez and Brown
Scheme 12
The asymmetric synthesis of enantiomerically pure primary amines has received considerable attention in recent years due to applications of the chiral amines, either as chiral auxiliaries for the synthesis of optically active molecules [33] or as a derivatizing agent for the resolution of racemic carboxylic acids [34]. Hydroborationamination is also a convenient synthetic route to epimerically clean amine derivatives in a simple one-stage reaction. Interestingly, trans-2-phenylcyclopentylamine (cypenamine), which is an antidepressant [35],can be obtained as a pure isomer in good yields by the hydroboration of 1-methylcyclopentene[7,10,36] (Scheme 13).
80 % yield
Scheme 13
Several steps are required in order to convert an alkene into the corresponding primary amine by enantioselective hydroboration, since there needs to be discrimination between the reagent and the derived B-alkyl group. This can be achieved in the manner shown in the first part of Scheme 14. Firstly, diisopinocampheylboraneis reacted with the alkene, and (especially after crystallization at low temperatures) the initial product is formed with diastereomeric homogeneity. An ingenious selective reduction of ethanal leads to regeneration of a-pinene and the desired fragment as a boronate ester. At this stage, the electrophilic reactivity is low and a further transformation is necessary in order to regenerate a reactive trialkylborane. The circuitous multistep pathway occurs in high yield, and results in a completely chemoselective alkyl transfer to the aminating agent in the desired direction [37].
2.2 Indirect Stoichiometric Amination
45
2 CHSHO 25 "C, 8h
Isolated as HCI salt 99 % ee
1 a...
92 % ee
hw
&J ii) hydrolysis yield 45 %
i ) 2H#OSO3H ii) hydrolysis ..at42
Scheme 14
This hydroboration-amination methodology shown in the second part of Scheme 14 can be extended to the synthesis of a series of enantiomerically pure terpenylamines [38,39], embracing (-)-cis-caran-truns-2-amine,(-)-cis-caran-truns-4amine, (-)-longifolamine, and (+)-cis-myrtanylamine. These are all formed in satisfactory yields by hydroboration of the corresponding alkene, if necessary purified
46
Fernandez and Brown
to enantiomeric homogeneity first, with Me,S.BH,Cl. The resulting R2BCl is then reacted with 0.33 equivalents of Me,AI to form the related R2BMecompounds, then transformed to amines in the conventional way with hydroxylamine-0-sulphonic acid. All the amines were > 99 % enantiomerically pure and were produced on a 60 millimolar scale [40](Figure 2.1). In similar vein, the initial product of a Matteson boronate ester synthesis may be converted into an enantiomerically pure amine [41]. The ability to synthesize enantiomerically pure primary amines by these diverse hydroboration methods finds useful application.
H2p pNH2 H2N 63 ,
- NH2
(-)-2-CarNH2
(-)-4-CarNH2
(-)-LSf"H2
(+)-MyrNHz
Figure 2.1
2.2.1.2 Applications to the Synthesis of Secondary Amines The stereoselective reaction of trialkylboranes with organic azides followed by hydrolysis leads to good yields of secondary amines. This reaction seems to be highly dependent on the steric environment of both the boron and the azide moiety [ 131. The mechanism of this reaction assumes that organoboranescan react with organic azides in a Lewis acid-base fashion to form a tetraco-ordinated boron species, which may ultimately lose nitrogen concurrent with the migration of an alkyl group from boron to nitrogen. Subsequent hydrolysis leads to secondary amines (Scheme 15).
Scheme 15
Although this reaction works well for unhindered trialkylboranes and azides, it has two major disadvantages: (i) only one of the three alkyl groups on boron is transferred; and (ii) it cannot be applied to hindered organoboranes [13] (Scheme 16).
2.2 Indirect Stoichiometric Amination
47
Scheme 16
The influence of steric factors on the organoborane also explains the unexpected insertion into 9-BBN observed in the hydroboration - amination of the dicyclopentadiene entity contained in the EPDM polymer [42] (Scheme 17).
Arninating reagent
T
V Aminating reagent
Scheme 17
To prevent the loss of alkyl groups in the 1,Zmigration step, easily available organodichloroboranes [43] proved to be the organoboranes of choice. However, when dibromoboranes were used instead, competitive migration of the alkyl group and bromide ocurred which led to the simultaneous formation of the expected secondary amine and tetraazaboroline [44](Scheme 18).
Scheme 18
48
Fernandez and Brown
Synthesis of N-alkylaziridine and N-arylaziridines is another interesting application via hydroboration- amination using organic azides as aminating reagents [ 13,451. The ready availability of 2-iodoalkylazides suggested that they might react with organodichloroboranes to give the corresponding 2-iodo-sec-amines. Subsequent treatment of these amines with base should lead via ring closure to the corresponding N-substituted aziridines, in which the relative configuration of the ring substituents may be easily defined (Scheme 19).
Scheme 19
Pyrrolidines are an important class of five-membered heterocycles with noteworthy biological properties [46]. In addition to pharmaceutical applications, the pyrrolidine moiety has also been widely used as a chiral auxiliary for asymmetric synthesis [47]. Although many elegant syntheses of chiral nonracemic pyrrolidines have been reported within the past decade or so [48-501, an alternative approach based on the intramolecular reaction of an azide and organoborane has been developed very recently [5 1-53]. This approach utilizes the hydroboration-azide alkylation tandem reaction as a key sequence, taking advantage of the efficient stereocontrolled steps. Scheme 20 shows an application of the synthesis of 3-substituted 5-(2pyrrolidiny1)isoxazolewhich has been found to have nanomolar activity, comparable to (5')-nicotine, against whole rat brain [54].
i) (IpckBAllyl ii) MeOH - M 44%
(PhO)PON3 I DBU 92 % ee
ii) MeOH i)R*H
-* Scheme 20
M
"
69 %
92 % ee
MJ
0 92%ee
"
2.2 Indirect Stoichiometric Amination
49
Successful execution of this approach requires selective migration of the w-aminoalkyl chain rather than the R substituent. This has been achieved by using halide 1551, cyclohexyl [56], ethyl or methyl nonmigrating R groups [51]. The synthesis of secondary amines from azides is efficient in terms of chemoselectivity [57] and has found valuable applications in the preparation of diamines [58,59], w-alkylaminoboronic esters [60], and in Diels- Alder-based amination reactions [61]. A convenient general route to open-chain polyamines, which play major roles in cellular differentiation and proliferation, has also been developed using the reductive alkylation of aliphatic aminoazides by (w-halogenoalky1)dichloroboranes as a key step [62] (Scheme 21). i) Br(CH2)nBC12I MeOH
R:
,N-(CH&-N3 R"
ii) NaN3 I NaOH iii) R"'BCl2 I MeOH
~
R'\ H R"/ N-W2h-N-
(CHzh-\**,
.H
Scheme 21
Enantiomerically pure secondary amines can be readily prepared from a-chiral organodichloroboranes and azides [63] (Scheme 22).
R"BH3Li
*
3HCI
t
R'BCI;!
+
3H2 3LiCI
i) R'N3 ii) NaOH
R'NHR'
up to 80% yield >99%ee
Scheme 22
Finally, the hydroboration-amination method via azides might be the key step in the synthesis of alkyl aryl ketones involving a free radical mechanism as opposed to the usual ionic pathway [64,65] (Scheme 23).
(chain propagation)
Scheme 23
50
Fernandez and Brown
The reaction of trialkylboranes with N-chloroalkylamines can be used to synthesize a wide variety of functionally substituted dialkylamines in good yields 166,671, and it complements the synthesis of secondary amines via the reaction of trialkylboranes with organic aides. The reaction is analogous to the reaction of chloramine with organoboranes, and presumably occurs via an anionotropic migration of an alkyl group from boron to nitrogen (Scheme 24).
Scheme 24
As regards the use of chloramine as aminating agent, dimethylalkylboranes have been used to prevent the loss of two alkyl residues [68,69].This reaction tolerates functionality in the organoborane, but the yields decrease dramatically for a sterically demanding N-chloralkylamine. Secondary amines can also be prepared by double-migrationreactions. In practice, however, the generation of amine reagents containing two good leaving groups is a major challenge. Nitric oxide reacts with organoboranes to give dialkylamines,but in low yield [70].A notable example involving double migration is synthesis of the secondary amine 13-azabicycl0[7.3.l]tridecan-5-olwhere the reagent is N-chloro0-2,4-dinitrophenyl hydroxylamine, generated in situ to react with the appropriate stereoisomer of perhydroboraphenalene (the hydroboration product of cis, trans, trans-cyclodeca-1,5,9-triene) [711 (Scheme 25).
Scheme 25
2.2 Indirect Stoichiornetric Amination
51
2.2.1.3 Applications to the Synthesis of Tertiary Amines The reaction of dialkylchloramines with organoboranes gives tertiary amines, if the competitive free radical reaction leading to the formation of alkylchlorides is suppressed by adding of a radical scavenger such as galvinoxyl [72,73] (Scheme 26). R3B
+
(CH&NCI
-
R(CH&N
+
RCI
Scheme 26
Azides have also been used as aminating reagent in a novel and convenient synthesis of 1-azaadamantane directly from the tetrahydrofuran complex of l-boraadamantane [74] (Scheme 27).
n
i)NaOH,Hfl2 ii)SOCI2 iii) NaOH
Scheme 27
&
2.2.2 Amination via Organozirconium Compounds In recent years, amines have also been synthesized by nitrogen insertion into a zirconium-carbon bond followed by hydrogenolysis [75] (Scheme 28).
52
F e m n d e z and Brown
Scheme 28
Organozirconium compounds prepared by hydrozirconation are useful intermediates in organic synthesis because of such applications as insertion of carbon monoxide [76,77], isocyanides [78], lithium chloroallylide [79], aldehydes [SO], halogens [77,8 I], oxygen [Sl], and single bond metathesis reactions [82]. Although metathesis with phosphines such as Ph,PC1 and PhF’Cl, occurs readily, attempts to carry out such reactions with analogous nitrogen-containing reagents such as RNHCl and RNCl,, have not been successful. There are precedents for the insertion of phenyl azide [83] or diphenyldiazomethane [84] into the Zr-C bond of dialkylzirconocenes, resulting in the formation of a new carbon-nitrogen bond (Scheme 29). PhNB
CPzZrR2
CpzZr(NRNNPh)(R) 7
1 -PhzC=N2
Cp2Zr(NRNCPhZ)(R)
Scheme 29
A further extension involves the readily synthesised zirconacyclopentanes,which react with the same reagents to give to give novel 18-electron azazirconacycles. These are very stable towards hydrolysis [75], but hydrogenolysis leads to the formation of a primary amine.
2.3 Indirect Catalytic Amination Although the B-H addition of borane etherates to simple alkenes occurs quite rapidly under ambient conditions, less electrophilic boranes are correspondingly less reactive. A classic example is given by catecholborane which reacts with alkynes only above 70°C and with alkenes under somewhat more forcing conditions [l, 851. The reason for this is not hard to find, since the electrophilic character of the borane is substantially diminished by conjugation between boron and adjacent oxygens [86,87]. At the same time, the acidity of B-H is enhanced through an
53
2.3 Indirect Catalytic Amination
onium ylid-type conjugation in the resulting anion. This makes the addition of catecholborane to transition metals correspondingly more favorable than that of secondary alkylboranes. Thus, it was shown first by Mannig and Noth that hydroboration by catecholborane could be successfully carried out at room temperature or below in the presence of catalytic amounts of one of a range of transition metal complexes [SS-901. In general, rhodium(1) complexes which are reactive in homogeneous hydrogenation provide the most effective catalysts, linking the process to both hydroformylation and more conventionally to hydrogenation. The mechanistic precedent for a process driven by the addition of catecholborane to a coordinatively unsaturated Rh center, and followed by sequential transfer of H and X,B to the alkene, lies in the mechanism of hydrogenation of alkenes by Wilkinson’s catalyst (Scheme 30). As might be expected, the chemoselectivity of catalytic hydroboration is distinct from that of the uncatalyzed reaction, and affords the possibility of selectively reacting an alkene in the presence of a carbonyl group H RhCI(PPh&
+ a o B H
0
-
RCH=CH2
5a 0 1 g d t RCH2CH2 t , P -P h 3 0
I
PPh3
0
CI
Scheme 30
Earlier work in the catalyzed addition of catecholborane to alkenes has been thoroughly reviewed [91,921. The most significant application of catalytic hydroboration has been the possibility of enantioselective hydroboration by the use of catalysts containing chiral ligands [93], in contrast to the traditional stoichiometric enantioselective hydroboration which requires one or two equivalents of a chiral auxiliary attached to boron [94]. Despite considerable efforts to find alternatives, catecholborane is the most useful borane among commonly accessible hydroborating agents; likewise rhodium complexes are the most efficient catalysts in asymmetric catalytic hydroboration (c.f. publications on catalysis with other metal complexes) [95 -971. Synthetic application of the resulting catecholborane adducts has been limited to oxidation to afford secondary alcohols, however [91,98,99]. Many of the common transformations of organoboranes do not work with boronate esters, because of the lower electrophilicity of the boron. Some success ensued when benzylic catecholboronate esters, isolated or prepared in situ, were reacted with ClMgN(Me)OSiMe3 or structurally related aminating agents. Although the enantioselectivity in the ensuing secondary amine was high, it was always accompanied by the formation of comparable amounts of the alcohol [loo]. This implies that the initial step involves either oxygen or nitrogen nucleophilic attack at boron which is irreversible, and determines whether an amine or alcohol is ultimately formed. The dual pathway was supported by I3C NMR studies with labeled reactants (Scheme 31).
54
Femandez and Brown OH
Ju
1 rnol % cat., THF, 20 then IM KOH
MeO isolated and distilled
33%. 88 % ee CF$30;
Scheme 31
In order to develop a more direct route, the necessary expedient was to activate the initial adduct towards nucleophilic attack. It had already been reported that catecholboronate esters react with Grignard reagents (2 equiv.) to form the corresponding trialkylborane [loll. This procedure could be carried out with MeMgCl (or alternatively Et,Zn) on the initial product of catalytic asymmetric hydroboration without isolation. The alkylborane thus formed is then reactive towards conventional aminating agents such as H,NOSO,H or aqueous ClNH,, leading to a one-pot asymmetric synthesis of primary benzylic amines from vinylarenes with retention of the configuration at the migrating group [102,103]. Reaction leads to the corresponding primary amine with high chemo-, regio- and enantioselectivity as indicated in Table 2.2 and Scheme 32. As in the simpler hydroboratiodoxidation reactions, there are structural constraints. The method tolerates a single substituent at the P-position, but not the a-position of the alkene, so that simple benzo-fused alkenes are suitable reactants. Step 1
A+--
1 mol % cat. THF, 20 "C [S-Quinap-Rh']
One-pot reaction
Scheme 32
1
1
Step 2
MeMgCI, THF
1
Ax.-
or ZnEtp,toluenr
diglyme
55
2.3 Indirect Catalytic Amination Table 2.2 One-pot hydrobration-amination reactions Reactant
Product
/o"
Regioselec- Isolated tivity (8) yield (%)
ee (%)
> 98
56
98
> 98
54
87
> 98
50
90
96
51
97
98
64
89
92
62
90
Me0
Me0
-
As is generally the case with Rh-catalyzed hydroborations, genuinely successful enantioselective reaction (> 90 % ee) has been recorded only for vinylarenes. Since the normal regiochemistry of these reactions places the rhodium at the benzylic position, some favorable interaction with the ring is to be expected the the reactive rhodium benzyl intermediate; this may formally be represented as an q3-complex,for which literature precedents exist [ 1041 (Scheme 33).
56
Fernandez and Brown
Scheme 33
This possibility of intimate association of rhodium with the aromatic ring suggests further experiments. A logical extension of asymmetric syntheses involving prochira1 reactants is a kinetic resolution with related chiral reactants under similar conditions. In the one case of hydroboration-amination where this has been applied, it has proved to be very effective. The reactant was prepared directly by a Heck reaction on 1,2-dihydronaphthalene,and under the standard conditions of catalytic hydroboration gave > 45 % of both enantiomerically pure recovered alkene with (after oxidative work-up) the alcohol of opposite hand, mainly as the trans-isomer. This procedure forms a simple and potentially useful route to pharmacologically active substances, demonstrated by the racemic synthesis shown [ 1051 (Scheme 34).
- Q +*; m
1) HBCat. 0.6 equiv. Rh COD (R)-QUINAP OTf Toluene 2h
2) Hfl2 I NaOH / EtOH Ph
OH
Ph
46 % yield trans :cis = 91 : 9
MeHN 1) HBCat, Toluene Rh COD (QU\NAP
I
OTL
2) E y n , Toluene 3) MeHNCI, EhO Ph
Ph
47 % yield trans :cis = 94 : 6
Scheme 34
99 % ee
2.3 Indirect Catalytic Amination
57
Following the demonstration of catalytic hydroboration- amination employing hydroxylamine-0-sulfonic acid as the electrophile, extension to the synthesis of secondary amines was considered. The method adopted involves the reaction with monochloralkylamines. These can be generated in situ by by reaction of a solution of a primary or secondary amine in an organic solvent with commercial sodium hypochlorite solution and used directly (c.f. the chloramine preparation above). A specific difference between monoalkyl and dialkylchloramines was discovered. The reaction of trialkylboranes with ClNEt,, verified by NMR as being formed cleanly, gave a range of products, and more significantly the tertiary amine was formed with complete racemisation. This is in line with the radical reaction pathway proposed by Davies, Roberts and co-workers [106]; some of the sideproducts may be formed by competing cationic routes. In contrast, the chloramines formed from primary amines reacted cleanly and with retention of configuration, providing a viable synthetic route to enantiomerically enriched benzylic secondary amines. The implication is clear; in the alkyl migration step of Scheme 35 deprotonation of the N-H either precedes or is concurrent with C-N bond formation making the pathway impossible for a secondary chloramine.
GH11NHClO "C, 5 min then 20"C, 1 h; MeO
YJ
XY" 73 I; 92 % ee
"N
PhCHflHCI 0 "C, 5
93 % ee by
FH2m
Hfl2 oxidation
75 %: 91 % ee
unmactie
Scheme 35
reactive
58
Fernandez and Brown
The successful method was demonstrated for the examples shown in Table 2.3; both the amine and the borane can be varied without detriment. The ees observed are consistently 1-5 96 lower than in the case of simple hydroboration-oxidation or the hydroboration-amination reactions discussed earlier [ 1071. Table 2.3 Alkylaminations employing in-sib-generated chloramines Entry
2
ee (%)
Yield (a)
87
71
93
73
92
82
r
91
75
/o"
90
77
91
76
78
50
87
48
Reactant
/o"
Product
MeO
3
MeO
4
MeO
5
MeO
r
2.4 Direct Alkene Amination
59
2.4 Direct Alkene Amination This field has been extensively reviewed in 1998by Muller and Beller, and the reader is referred to this article for further detail [l08]. Whilst there is yet no general method, catalytic or noncatalytic, for the conversion of a nonelectrophilic or unactivated alkene into the corresponding amine by addition of a nitrogen electrophile, progress is encouraging. The main thrust of this chapter is the development of asymmetric synthesis, but other recent relevant examples are illustrated in Scheme 36. The samarium complex-catalyzed intramolecular amination of alkenes through an exocyclic pathway forms pyrrolidines exclusively as in examples (a) and (b). Intermolecular addition is quite rare; with special activating factors it may be observed as in the allenic example (c). In the presence of Rh catalysts, styrenes react with secondary amines to form enamines with sacrificial hydrogenation of a mole of alkene, as in (d). Very reasonably, the authors suggest a pathway in which the rhodium catalyst promotes N-H insertion followed by amide addition to the alkene and p-elimination to form an RhH, intermediate and the enamide [ 1091.
catalyst
catalyst Cp*2SmCH(SiMe3)2
w
21 "C
55 turnovers/ h stereoisomers
(d)
2.5 ml%(PFh3)2pRc THF. reflux, 20 h
+
99 % of each
Scheme 36
60
Fernandez and Bmwn
Insofar as asymmetric synthesis is concerned, some pioneering work was conducted by Marks and co-workers through their demonstration of enantioselectivity in the samarium or lanthanide complex-catalyzed cyclization of aminoalkenes, an analogy of the simple reaction exemplified in Scheme 36. As before, the reaction works best for &-unsaturated amines where the product of an exocyclic ring closure pathway is a cyclopentylamine. In the most favorable cases, high turnover to the desired product is observed [110] (Scheme 37).
Scheme 37
Intermolecular asymmetric aminations are at an early stage of development, and consequently much lower turnover frequencies and catalytic yields have been observed at this stage. In the example shown, a key aspect is the activation of the indium complex catalyst by fluoride ion [lll] (Scheme 38).
75 "C, 72,h 4:l F: catalyst
95 % ee, 11 turnovers
Scheme 38
catalyst
References
61
References [ 11 H. C. Brown, Boranes in Organic Chemistry,Cornell University Press, Ithaca, New York, 1972; E-
I. Negishi, Organometallics in Organic Synthesis, Wiley Interscience, New York, 1980. [2] H. C. Brown, Organic Synthesis Via Boranes, John Wiley and Sons, New York, 1975. [3] H. C. Brown, B. C. Subba Rao, J. Am. Chem. SOC.1956, 78, 5694. [4] H. C. Brown, W. R. Heydkamp, E. Breuer, W. S. Murphy, J. Am. Chem. SOC. 1964, 86, 3565. [5] N. H o m e s , P. von R. Schleyer J. Org. Chem. 1991,56,4074; for recent computational studies of catalytic hydroboration see :D. G. Musaev, A. M. Mebel, K. Morokuma, J. Am. Chem. SOC.1994, 116, 10693; A. E. Dorigo, P. V. Schleyer, Angew. Chem., Inr. Ed. Engl. 1995, 34, 115. [6] C. Narayana, M. Periasamy, J. Chem. SOC. Chem. Commun. 1987, 1857. [7] H. C. Brown, K-W Kim,M. Srebnik, B. Singaram, Tetrahedron 1987, 43, 4071. [8] G. W. Kabalka, G. W. McCollum, S. A. Kinda, J. Org. Chem. 1984,49, 1656. [9] G. W. Kabalka, K. A. R. Sastry, G. W. McCollum, H. Yoshioka, J. Org. Chem. 1981, 46,4296. [lo] M. W. Rathke, N. Inowe, K. R. Varma, H. C. Brown, J. Am. Chem. SOC. 1966, 88,2870. [ l l ] G. W. Kabalka, J. W. Ferrell, Synth Commun. 1979, 9, 443. 1121 Y. Tamura, J. Minamikawa, S. Fuji, M. Ikeda, Synthesis 1974, 196. [ 131 H. C. Brown, M. M. Midland, A. B. Levy, A. Suzuki, S. Sono, M. Itoh, Tetrahedron 1987,43,4079. [14] G. W. Kabalka, D. A. Henderson, R. S. Varma, Organometallics 1987, 6, 1369. [I51 V. B. Jigajinni, A. Pelter, K. Smith, Tetrahedron Lett. 1978, 2, 181. [16] G. Zweifel, H. C. Brown, J. Am. Chem. SOC. 1964, 86, 393. [17] G. Zweifel, A. Horng, Synthesis 1973, 672. [I81 E. J. Corey, W. L. Seibel, Tetrahedron Lett. 1986, 27, 905. [ 191 H. C. Brown, E. Vismara, F. Fontana, G. Morini, M. Serravalle, J. Org. Chem. 1987, 52, 730. [20] H. C. Brown, T. E. Cole, M. Srebnik, K-W. Kim, J. Org. Chem. 1986, 51, 4925. [21] G. W. Kabalka, Z. Wang, N. M. Goudgaon, Synrh. Commun. 1989, 19, 2409. I221 R. Koster, P. Binger, W. Fenzl, Inorg Synth. 1974, 15, 134. [23] P. J. Kothari, R. D. Finn, G. W. Kabalka, M. M. Vora, T. E. Boothe, A. M. Emran, Appl. Radiat. hot. 1986, 37, 469. [24] G. W. Kabalka, Z. Wang, J. F. Green, M. M. Goodman, Appl. Radiat. Isor. 1992, 43, 389. [25] G. W. Kabalka, K. Sastry, G. W. Mc Collum, C. A. Lane, J. Chem. Soc., Chem. Commun. 1982,62. [26] G . W. Kabalka, Z . Wang, Synth Commun. 1990, 20, 21 13. [27] J. P. Gen&t,J. Hajicek, L. Bisschoft, C. Greck, Tetrahedron Lett. 1992, 33, 2677. [28] N. Wachter-Jursak, F. Scully, Tetrahedron Lett. 1990, 31, 5261. [29] V. B. Jigajinni, A. Pelter, K. Smith, Tetrahedron Lett. 1978, 19, 181. I301 R. Y. Yang, L. X . Dai, Synthesis 1993, 481. [31] G. W. Kabalka, N. M. Goudgaon, Y. Liang, Synrh. Commun. 1988, 18, 1363. [32] B. Carboni, M. Vaultier, Bull. SOC.Chim. Fr: 1995, 132, 1003. [33] J. M. Chang, I. S. Clarke, I. Koch, €? C. Olbach, N. J. Taylor, Tetrahedron: Asymm. 1995,6,409. 1341 C. Bussche-Hiinnefeld, C. Cescato, D. Seebach, Chem. Ber: 1992, 125, 2795. [35] W. R. McGrath, W. L. Kuhn, Arch. In?. Pharmacrodyn. Ther: 1968, 172, 405. [36] A. Burgos, J. M. Kamenka, B. Rousseau, J. Label, Compounds Radiopharm. 1991, 29, 1347. [37] H. C. Brown, K. W. Kim, T. E. Cole, B. Singaram, J. Am. Chem. SOC. 1986, 108, 6761. 1381 H. C. Brown, P. V. Ramachandran, J. Organomet. Chem. 1995,500. 1. 1391 P. V. Ramachandran, M. V. Rangaishenvi, B. Singaram, C. T. Goralski, H. C. Brown, J. Org. Chem. 1996, 61, 34 1. [401 H. C. Brown, S. V. Malhotra, P. V. Ramachandran, Tetrahedron: Asymm. 19%. 7, 3527. I411 M. V. Rangaishenvi, B. Singaram, H. C. Brown, J. Org.Chem. 1991, 56, 3286. [42] M. van Duin, L. Leemans, M. Neileu, Polymer 1999,40, 1001. [43] P. Y. Chavant, F. Lhermitte, M. Vaultier, Synletr 1993, 519. [44] B. Carboni, M. Vautier, T. Cougeon, R. Carrit, Bull. SOC. Chim. FI: 1989, 844. 1451 A. B. Levy, H. C. Brown, J. Am .Chem. SOC. 1973, 95, 4069. [46] a) G. Massiot, C. Delande, The Alkaloids, Academic Press, New York, 1986,27; b) A. Numuta, T. Ibuka, The Alkaloids, Academic Press, New York, 1987, 31.
62
Fernandez and Brown
[47] a) J. K. Whitesell, Chem. Rev. 1989,89,1581; b) K. Tomioka, Synthesis 1990,541;c) R. Noyori, M. Kitamura, Angew. Chem Int. Ed. Engl. 1991, 30, 49. [48] A. Suzuki, S. Sono, M. Itoh, H. C. Brown, M. M. Midland, J. Am .Chem. Soc. 1971, 93, 4329. [49] H. C. Brown, M. M. Midland, J. Am .Chem. Soc. 1972, 94, 2114. [50] H. C. Brown, M. M. Midland, A. B. Levy, J. Am .Chem. SOC. 1973, 95, 2394. [51] A. Salmon, B. Carboni, J. Organomet. Chem. 1998, 567, 31. [52] J. M. Jego, B. Carboni, A. Youssofi, M. Vaultier, Synlett. 1993, 595. 1531 H. C. Brown, A. M. Salunkha, Tetrahedron Lett. 1993, 1265. [54] S. J. Wittenberger, J. Org. Chem. 1996, 61, 356. [551 J. M. Jego, B. Carboni, M. Vaultier, R. CarriC, J. Chem. Soc., Chem. Commun.1989, 142. 1561 D. A. Evans, A. E. Weber, J. Am .Chem. Soc. 1987, 109, 7151. [57] B. Carboni, M. Vaultier, R. CamC, Tetrahedron 1987, 43, 1799. [58] A. Benalil, B. Carboni, M. Vaultier, Tetrahedron 1991~.47, 8177. [59] M. Vaultier, B. Carboni, P. Martinez-Fresneda, Synth. Commun.1992, 22, 665. [60] J. M. Jego, B. Carboni, M. Vaultier, J. Organomet. Chem. 1992, 435, 1. [61] N. Noiret, A. Youssofi, B. Carboni, M. Vaultier, J. Chem. Soc., Chern. Commun. 1992, 1105. [62] B. Carboni, A. Benalil, M. Vaultier, J. Org. Chem. 1993, 58, 3736. 1631 H. C. Brown, A. M. Salunke, A. Singaram, J . 0%.Chem. 1991, 56, 1170. [64] A. Suzuki, M. Tabato, M. Ueda, Tetrahedron Len. 1975, 16, 2195. [65] A. F. Bamford, M. D. Cook, B. I? Roberts, Tetrahedron Lett. 1983, 24, 3779. [66] G. W. Kabalka, G. W. McCollum, S. A. Kunda, J. 0%.Chem. 1984,49, 1656. [67] G. W. Kabalka, 2. Wang, Organometallics 1989, 8, 1093. [68] G. W. Kabalka, 2. Wang, Synth. Commun.1990,20, 231. [69] G. W. Kabalka, 2. Wang, Synth. Commun.1990, 20, 2113. [70]S. J. Breis, A. J. Rutkowski, US. Pat. 3,147,310 (1964). [C.A., 61,1189 (1964)l [71] R. H. Mueller, Tetrahedron Lett. 1976, 17, 2925. [72] A. G. Davies, S. C. W. Hook, B. P. Roberts, J. Organomer. Chem. 1970,23, C11. [73] J. G. Shareflcin, H. D. Banks, J. 0%. Chem. 1965,30,4313. 1741 Y. N. Bubnov, M. E. Gursky, D. G. Pershin, J. Organomet. Chem. 1991, 412, 1. [75] T. Luker, R. J. Whitby, M. Webster, J. Organomet. Chem. 1995, 492, 53. 1761 D. R. Swanson, C. J. Rousset, E. Negishi, T. Takahashi, T. Seki, M. Saburi, Y. Uchida, J. Org. Chem. 1989,54, 3521. [77] C. J. Rousset , D. R. Swanson, F. Lamaty, E. Negishi, Tetrahedron Lett. 1989, 30, 5105. [78] J. M. Davis, R. J. Whitby, A. Jaxa-Chamiec, Tetrahedron Lett. 1992,33,5655,b) J. M. Davis, R. J. Whitby, A. Jaxa-Chamiec, Tetrahedron Lett. 1994,35,1445, c) J. M. Davis, R. J. Whitby, A. JaxaChamiec, Synlett. 1994, 1 11. [79] T. Luker, R. J. Whitby, Tetrahedron Lett. 1994, 35, 785. [80] C. CopCret, E. Negishi, Z. Xi, T. Takahashi, Tetrahedron Lett. 1994, 35, 695. [81] W. A. Nugent, D. F. Taber, J. Am .Chem. Soc. 1989, 112, 6435. [82] P. J. Fagan, W. A. Nugent, J. C. Calabrese, J. Am .Chern. Soc. 1994, 116, 1880. [83] K. W. Chiv, G. Wilkinson, M. Thornton-Pett, M. B. Hursthouse, Polyhedron 1984, 3, 79. [84] S. Gambarotta, C. Floriani, A. Chiesi-Villa, C. Guastini, Znorg. Chem. 1983, 22, 2029. [85] H. C. Brown, “Hydmboration” Wiley Interscience, New York, 1962. (861 G. W. Kabalka, Org. Prep. Pmceed. Znt. 1977, 9, 131. [87] A. Pelter, K. Smith, Chemistry oforganoboron Compounds, in Comprehensive Organic Chemistry, vol 111, ed. N. Jones, Pergamon Press, 1979, 194. [88] D. Mannig, H. Noth, Angew. Chem. lnt. Ed. Engl. 1985, 24, 878. [89] H. Kono, K. Ito, Y. Nagai, Chemistry Lett, 1976, 1095 [90] J. A. Long, T. B. Marder, P. E. Behnker, M. F. Hawthorne, J. Am. Chem Soc. 1984, 106, 2979. [91] K. Burgess, M. J. Ohlmeyer, Chem. Rev. 1991, 91, 1179. [92] I. Beletskaya, A. Pelter, Tetrahedron. 1997, 53,4957. [93] Z. Deloux, M. Srebnik, Chem. Rev. 1993, 93, 763. [94] H. C. Brown, P. V. Ramachandran, Current Topics in the Chemistry ofBorun, ed. G. W. Kabalka, R. S. C. London, 1994, 101. [95] S. Pereira, M. Srebnik, Organometallics 1995, 14, 3127. 1961 E. A. Bijpost, R. Duchateau, J. H. Teuben, J. Mol. Catal. 1995, 95, 121. 1971 X. M. He, J. F. Hartwig, J. Am. Chem. SOC. 1996, 118, 1696.
References
63
[98] J. M. Valk, G. A. Whitlock, T. P. Layzell, J. M. Brown, Tetrahedron: Asymmetry 1995, 6, 2593. [99] H. Doucet, E. Fernandez, T.P. Layzell, J. M. Brown, Chem. Eu,: J. 1999, 5, 1320. [IOO] F. I. Knight, J. M. Brown, D. Lazzari, A. Ricci, A. J. Blacker, Terrahedron 1997, 53, 11411. [ 1011 S. Cabiddu, A. Maccioni, M. Secci, Gau. Chim. ltal, 1972, 102, 555. [lo21 E. Fernandez, M. W. Hooper, F. I. Knight, J. M. Brown, Chem. Commun. 1997, 173. [ 1031 J. M. Brown, H. Doucet, E. Fernandez, H. E. Heeres, M. W. Hooper, D. I. Hulrnes, F. I. Knight, T. P. Layzell, G. C. Lloyd-Jones, Chemistryfor the 21st Century, ed. S-I. Murahashi and S. G. Davies, 465-483; Blackwell Science 1999. 11041 B. Windrnuller, J. Wolf, H. Werner J. Organomet. Chem. 1995,502,147; H. Werner, M. Schafer, 0. Nurnberg, J. Wolf Chem. Be,: 1994, 127, 27; M. D. Fryzuk, D. H. McConville, S. J. Rettig J. Organomet. Chem. 1993,445, 245. [I051 K. Maeda, J. M. Brown., 1999, in preparation. [lo61 A. G. Davies, S. C. W. Hook, B. P. Roberts, J. Organomet. Chem. 1970,23, C11. [I071 E. Fernandez, K. Maeda, M. W. Hooper, J. M. Brown, Chem. Eur J., submitted 1999. [108]T. E. Muller, M. Beller, Chem. Rev., 1999, 99, 675. [I091 (a) M. R. GagnC, S. P. Nolan, T. J. Marks, Organometallics,1990, 9, 1716. (b) Y.Li, T. J. Marks, J. Am. Chem. Soc., 1996,118,707. (c) L. Besson, J. Gori, B. Cazes, Tetrahedron IRtt., 1995,36,3857; see also M. Al-Mesum, M. Meguro, Y.Yamamoto, TetrahedronLett., 1997,38,6071; (d) M. Beller, M. Eichenberger, H. Trautwein, Angew. Chem. lnt. Ed. Engl, 1997, 37, 2225. [ 1101 M. R. Gagni, L. Brand, V. P. Conticello, M. R.Gardello, C. L. Stem, T. J. Marks, Organometallics, 1996, 11, 2003 [ill] R. Dorta, P. Egli, F. Zurcher, A. Togni J. Am. Chem. SOC. 1997, 119, 10857, and refs. therein.
Modern Amination Mefhods Edited by Alfredo Ricci copyright 0 WILEY-VCH Verlag GmbH, 2wO
3 Stereoselective Electrophilic Amination with Sulfonyloxycarbamates and Azodicarboxylates Jean-Pierre Genet, Christine Greck and Damien Lavergne
3.1 Introduction The electrophilic amination reaction constitutes an example of the “Umpolung” methodology for the direct introduction of an amino group into organometallic compounds. This technology has created a need for versatile and efficient electrophilic aminating reagents. The chemistry of nitrogen electrophiles was excellently summarized in several reviews and books [l]. A number of electrophilic aminating reagents is now available (Scheme l), and early candidates such as haloamines 1and compounds derived from hydroxylamines 2 have been used extensively. The interesting feature of these electrophilic aminating reagents is the attachment of a leaving group to the nitrogen. Sulfonyl azides 3 allow the introduction of an “NH2+”synthon, and alkyl or aryl azides prepared with these reagents can be reduced or hydrolyzed to primary amines, [Id, 21.
H2NX
( X = CI, Br )
H2N-OL
1 N3SO2R (R = Ph, CF3)
3
!
( L = Alkyl, SOzAr, PPh2 )
2 E-NZN-E
4
( E = COgt-BU COaBn, C02Et )
RXc‘
R
N=O
5
Scheme 1
Azodicarboxylates 4 have been used in the electrophilic reaction with diethyl malonate since 1924 [3]; however only recently were these reagents recognized as particularly useful for the introduction of an amino moiety after hydrogenolysis of the hydrazide adduct [3]. More recently, chloro nitroso reagents of type 5 have been introduced by Oppolzer [4].These reagents are particularly reactive, giving
66
Genet, Greck and Lavergne
after acidic work-up the hydroxylamine, with a reductive cleavage by Zn dust of the N-0 bond providing the free amino group. The increasing application of direct metallation methods and the importance of primary amines as synthetic intermediates have created a need for new aminating reagents. In particular, reagents that could directly transfer an N-protected group rather than a free amino group. In this context several N,O-diprotected hydroxylamines have been recently reported (Scheme 2): tert-butyl and ally1 N-[(aqlsulfonyl)oxy]carbamate 6 [5] and the N, 0-bis(trimethylsily1)hydroxylamine 7 [6].
I
dOy.
N‘OSO*Ar
HN-0
0 / \ Ar-CH-N-P
7
8
Me&,
,SiMe3
0
6 Scheme 2
These species containing both a leaving group and a protecting group attached to the nitrogen are synthetic equivalents of “+NHP”(P = CO,R, SiMe,), and are very reactive to organometallic reagents. Finally, other N-protected electrophilic reagents should be mentioned such as the N-protected oxaziridines 8 [7], which so far transfer efficiently under mild conditions its N-protected fragment to N-nucleophiles but however give moderate yields with C-nucleophiles, [7c, el. In contrast to stereoselective C -C bond-forming reactions, the related electrophilic amination of chiral carbon nucleophiles is a recent conceptual advance in the repertoire of synthetic methodology. The problem is the correct choice of the nucleophile, and of the most efficient nitrogen electrophile. The chemistry of useful reagents such as sulfonyl azides 3 and chloro nitroso alkanes 5 was excellently reviewed in 1995 [ Id]. This chapter outlines a collection of the major reports that have appeared in the field of stereoselective electrophilic amination using sulfonyloxycarbamates 6 and azodicarboxylates 4.
67
3.2 Sulfonyloqrarbamates
3.2 Sulfonyloxycarbamates 3.2.1 Preparation of N-[(arylsulfonyl)oxy]carbamates Tert-butyl N-(tosy1oxy)carbamate 6a was easily obtained from commercially available tert-butyl N-hydroxycarbamate by tosylation with tosyl chloride [5a, c]. Ally1N[@-toluenesulfonyl)oxy]carbamate 6b tea-butyl and allyl N-[(mesitylsulfony1)oxylcarbamates 6c and 6d were prepared from hydroxylamine [5d, 81 (Scheme 3). The corresponding metallated N- [(arylsulfonyl)oxy]carbamates 9 were obtained by treatment with one equivalent of base (n-butyllithium, ethylmagnesium bromide or potassium hexamethyl disilazane). Tert-butyl N-lithio-N-[@-toluenesulfonyl)oxy]carbamate 9a (LiBTOC) [5a, el is less stable than tert-butyl N-lithio-N[(mesitylsulfonyl)oxy]carbamate 9c [81. THF solutions of allyl N-lithio-N-[(mesitylsulfonyl)oxy]carbamate 9d are also stable and can be stored several days at 0°C. This enhances the value of these reagents for electrophilic amination that are able to directly transfer the “+NHAlloc”or “+NHBOC”moieties to various organometallic compounds: alkyllithiums, dialkylcuprates, a-cuprophosphonates, aryl coppers, and organoboranes [5b].
H I
a
R=MU
b
R
w
R0’vNXOSO2Ar
0
t‘
Ar= *Me =
R ” K C
R=tBu
d
R
6 =
“OS02Ar
0
w
Ar= M *‘e Me
9
Scheme 3
This amination procedure involves two negative species: the metallated “nitrenoid” ArSO,N(M)CO,R 9 and the organometallic reagent that ought to repel each other. Boche and co-workers have established that tert-butyl N-lithio-N-[(mesitylsulfonyl)oxy]carbamate 9c crystallized as a dimer and the N - 0 bond in the lithiated species was longer than the related bond in its non lithiated counterpart. This structure is in accord with a nitrenoid character and the remarkable facile substitution of the sulfonate group by organometallic reagents. The amination may proceed through S,2 process [9].
68
Genet, Greck and Lavergne
3.2.2 Stereoselective Synthesis of a-Amino Carboxylic and Phosphonic Acids via Electrophilic Amination with Lithium tert-Butyl N-(tosyloxy) carbamate The importance of amino acids has stimulated the development of numerous routes for their synthesis. Among these, the electrophilic amination of chiral enolates possesses a broad degree of generality.
3.2.2.1a-Amino Carboxylic Acids The Merck group has applied the electrophilic amination using lithium tert-butyl N(tosy1oxy)carbamate9a to the chiral amide derived from ( lS,2R)-cis-amino-indanol [lo] (Scheme 4). Treatment of 10 with n-Buli in THF at -78 "C gave the lithium enolate which was reacted with CuCN. The resulting amide cuprate was allowed to react with 9a. The authors found that a single diastereomer of a-Boc-protected amino amide 11was formed. The sense of asymmetric induction observed was consistent with preferential approach of 9a from the least hindered face of the enolate. The removal of the chiral auxiliary with refluxing 6N HC1 afforded a-amino acids 12 in good yields and optical purities.
6N HCI
1) n-BuLi, -78 "C, THF 2) CUCN, -78 "C
-
*
reflux
0 'C
3)TsON(Li)Boc, -78 "C
NH2
yield = 81 - 86 % 10
11
12 ee = 89-98 %
R = En,Ph, Me, Bu, i-Pr
Scheme 4
3.2.2.2a-Amino Phosphonic Acids The phosphonic amino acids are also an important class of compounds with applications as antibiotics, antiviral agents, and enzyme inhibitors. The first example of electrophilic amination of a-cuprophosphonates 14 was reported by Genet and co-workers [5a]. This route has opened new access to N-protected a-amino phosphonic derivates 15 from the corresponding phosphonates 13 (Scheme 5).
69
3.2 Sulfonyloxycarbamates
-
0 Et0-F EtO' vR
1) RLi, THF
2)CuBr-MepS
yR -
0 EtO-p EtO'
II
0 EtO-1 EtO'
1) TsON(Li)R2
yR
2) NH&I
cu
13
yield = 50-80 O h
14
R = Me, Ph
NHR~
15 R2 = Boc. AIIoc
Scheme 5
The diastereoselective electrophilic amination of chiral a-alkyl phosphonamides derived from C, symmetric diamines with metallated tert-butyl N-[(p-toluenesulfonyl)oxy]carbamate 6a was examined. Treatment of 16 with n-BuLi followed by CuBr . Me,S at -78 "C and quenching with 9a LiBTOC provided the a-aminated Boc-protected adducts 17 in moderate to good yields and diastereoselectivities [ l I] (Scheme 6).
Yield (%)
de (%)
Me
59
30
Ph
48
35
49
52"'
Me
Me 1) n-BuLi, -78 "C, THF
he
*
2) CuBr-MepS 3) TsON(Li)Boc, -78 "C
Ph
Me
x"
'I" PhhN
Me
17
16
x"
aN
Ph
tie lnl
Major diastereomer was hydrolyzed to ( @a-amino-u-phenylmethylphosphonicacid
Scheme 6
3.2.3 Reactions of Ethyl N-[(p-nitrobenzenesulfonyl)oxy]carbamate with Chiral Enamines and Enol Ethers In contrast with the metallated N-[(arylsulfonyl)oxy]carbamates, it has been known since 1965 that ethyl N-[(p-nitrobenzenesuIfonyl)oxy]carbamate 6e is a precursor of nitrene, thus a-elimination of p-nitrobenzensulfonate ion (NsO-) from the anion of ethyl N-[(p-nitrobenzenesulfonyl)oxy]carbamate 6e leads at room temperature to the formation of (ethoxycarbony1)nitrene 18 [ 12a] (Scheme 7).
70
Genet, Greck and Lavergne
18
6e Scheme 7
More recently, Tardella and co-workers disclosed the use of this reagent in the synthesis of N-(ethoxycarbony1)-a-amino ketones from enamines and nitrene 18 [12b]. Their attempts to obtain asymmetric induction started with the use of proline-derived optically active enamines of cyclohexanone. Slow addition of sulfonyloxycarbamate 6e (1 equiv.) to a stirred solution of the enamine 19 and triethylamine (1 equiv.) in dichloromethane at room temperature, followed by work-up with petroleum ether and silica gel chromatographic purification afforded the aminated product 20 in low yield and good enantiomeric excess [12c] (Scheme 8).
“’H
A
Yield
R CHpOSiMea CH20Me
(Yo)
ee (Yo)
12 18
52 77
21
The absolute configuration and enantiomeric excess of amino ketones 20 were evaluated by gas chromatography (GC) and I3C NMR studies after conversion into the diastereomeric acetals 21.The reaction proceeds via addition of the nitrene 18 to the double-bond of 19.The yield and diastereoselectivity of this reaction were significantly enhanced when using chiral enol ethers 23, generated from C , symmetric 22.The best result (36 % yield and 50 % ee) was obtained using a fivefold excess of reagent 6e and equimolar amount of triethylamine [12d] (Scheme 9).
*d
TMSOTf
22
/-(
OTMS
23 Scheme 9
NEb NSONHC02EI
X
Yield
ee
(Yo)
(Yo)
rt
Me Ph
24
36 50
36
3.3 Dialkylazodicarboxylates
71
Very recently, the same group proposed an access to a-amino P-ketoesters from chiral p-enamino esters [ 12el. The amination reaction was performed with sulfonyloxycarbamate 6e (1 to 3 equiv.) in dichloromethane without base over two days, using chiral p-enamino ester derived from C, symmetric pyrrolidines 24 or (R)1-phenylethylamine 26 (Scheme 10).
...,
/OMe
I
NsONHC02Et P
Me0P
H
CHzCI2 rt
H
H3C
CO2Et
36 % yield major (R)-25
24
-
H Me PhANH
NsONHC02Et
0
@
CH2CI2
Et
It
49 O h yield
26
27 ee = 60 YO
Scheme 10
Chemical correlation allowed the determination of the absolute configuration of the major enantiomer of compound 25 and of the enantiomeric excess of 27. The authors suggest that these reactions proceed through an intermediate aziridine. ~
3.3 Dialkylazodicarboxylates Azodicarboxylates are efficient sources of positive nitrogen used in the preparation a-hydrazino and a-amino acids starting from chiral enolates. Di-tert-butyl 4a [3b] (DTBAD) and dibenzyl4b [3c] (DBAD) azodicarboxylates are the most commonly used reagents for diastereoselective electrophilic amination (Scheme 11). Both compounds are available commercially.
72
Genet, Greck and Lavergne
0
0
V K N = N A O T >
DTBAD 4a
0
DBAD
4b
Scheme 11
3.3.1 Electrophilic Amination of Silyl Ketene Acetals The E-silylketene acetals derived from ( lR,2S)-N-methylephedne esters were shown to be very useful reagents for the TiC1,-mediated asymmetric synthesis of a-amino and a-hydrazino acids [ 131. Thus, the asymmetric electrophilic amination was achieved using TiC1,- t-BuO,CN=NCO,t-Bu (DTBAD). (lR,2S)-N-Methylephedrine was treated with acid chlorides in dichloromethane to give quantitatively the correspondingesters. LDA enolization (THF, -78 "C) and Me,SiCl trapping at 78 "C gave the silyl ketene acetals 28 (95 %, Esz 2 95/5). Slow addition of the silylketene acetal in dichloromethane to 1 equiv. of the TiC1,-DTBAD complex in dichloromethane at - 80 "C gave good overall yields of the amination products with remarkable stereoselectivity. The major diastereomer of compound 29 can be separated and isolated by flash chromatography. The crude adducts 29 were hydrolyzed to give a-hydrazino esters which were saponified to afford a-hydrazino acids (R)-30. By use of the isolated stereomer 29 or by recrystallization (EtOH, 98 %), enantiomerically pure a-hydrazino acids 30 were obtained. Finally, hydrogenolysis of the N-N bond in the presence of PtO, gave the a-amino acids (R)-31in good yields. Starting from crude a-hydrazino acids 30, the pure a-amino acids 31 were obtained with 78 to 91 % ee. The use of recrystallized 30 gave only (R)-31 (ee 2 98 %) (Scheme 12, Table 3.1).
73
3.3 Dialkylazodicarboxylates
-
R H
DTBAD,Tic14
OSiMe3
CH2C12 -80 "C
co218u
0
H
28 1) CFSCO~H, rt, 1.5 h 2) LiOH, MeOH, rt 3) Dowex 5OW
29
x."
R
*
N/NH2 H
H02C
-
y
R
1) H2 I PtOp
2) Dowex 5OW
H02C
(R)-30
NH2
(R)-31
Scheme 12 Table 3.1 R
CH3 CH,Ph CH,CH(CH3), CH,CH3 (CH2)3CH3
Yield of 29 (%)
Yield of 30 (%)
Yield of 31 (%)
ee of 31 (%)
70
78 81 81 80 78
92 89 91 93 90
90.6 91 81.5 84 78
45
70 65 45
Absolute configurations and enantiomeric excesses of the products were checked by [a], comparison, by HPLC and capillary GC using chiral columns. In summary, a-hydrazino acids and natural and unnatural a-amino acids could be obtained in both the R and S configurations by this practical method. The silylketene acetals derived from l0-(aminosulfonyl)-2-bornylesterswere also good substrates in the electrophilic amination reactions using DTBAD. Enantioselective syntheses of a-amino acids were described by Oppolzer and co-workers [ 141. The crystalline starting esters 33 were usually obtained in 82-96 % yield by reaction of acid chlorides with the chiral alcohol auxiliary 32 in the presence of AgCN (Scheme 13).
0
32 Scheme 13
33
74
Genet, Greck and Lavergne
Kinetic or thermodynamic deprotonations of 33 (R = Bu) followed by addition of DTBAD (1.25 equiv., -78 “C, 1 h) furnished diastereomeric mixtures of aminating products: 34a and 34b (Scheme 14).
34a Kinetic : 81 LDA 1.1 equiv., THF, -78 “C Thermodynamic : LDA 1.1equiv., HMPA/THF (1:4), -78 “C 27
34b 19 73
Scheme 14
Significantly higher stereoselectivities were observed in the Lewis acid-promoted 1,Cadditions. Kinetically controlled deprotonatiodsilylation of esters 33 followed by treatment of the resulting crude ketene silyl acetals 35 with TiC14/”’i(Oi-Fr)4(2: 1) and DTBAD (1.25 equiv.) at -78 “C, gave the adducts 34 in good yields and excellent diastereoselectivities (Scheme 15; Table 3.2).
LDA
33
Me3SiCI
DTBAD OSiMe3
Tic14 I Ti(0iPr)d
35
34a
34b
major Scheme 15
Table 3.2 R
Yield 34a
CH, CZH, C3H7 i-C,H7 i-C& C4H9
81 84
C6H,3
PhCH, I-AdWtylCHz
72 73 71 85 69 76 65
+ 34b (%)
Diastereomeric ratio 34a34b 96.9:3.1 98:2 98.2:l.g 9752.5 96.5:3.5 96.3:3.7 9554.5 98.2: 1.8 82:18
3.3 Dialkylazodicarboxylates
75
The diastereomeric excesses were determined by HPLC and ‘H Nh4R on the crude product. The major diastereomers Ma were then purified by flash chromatography or crystallization and obtained in virtually 100 % de. Their (2s) absolute configuration was assigned by transformation to the corresponding (259-a-amino acids. Removal of the t-butyloxycarbonyl groups was obtained by treatment of M a with a solution of trifluoroacetic acid in dichloromethane (1: 1,O “C,3 h). N-N-Hydrogenolysis was achieved under H2 (75 psi, rt, 15 h) in the presence of a catalytic amount of PtO, in ethanol to afford crystalline a-amino esters 36. Finally, the chiral auxiliary was cleaved and regenerated by nondestructive transesterification in the presence of Ti(OEt),. The a-amino acid hydrochlorides (S)-37 were obtained by heating the crude amino acid ethyl esters in 6 N aqueous HCl and after evaporation of the solution (Scheme 16).
1) TFA, CH2C12
34a
2)Ha PQ
1) Ti(OEt)4, EtOH
R
*
0
2) 6 N aq. HCI
55 - a3 %
H ~ ~ / J \ ; ~ I H ’ .Hci
65 - 95 Yo 36
+ recovered 32 (>95%)
(s)-37
Scheme 16
The ( 2 8 absolute configuration and enantiomeric purities (up to 99 % ee) of the crude amino acids 37 were readily determined by GC comparison (using a chiral capillary column) of their (N-trifluoroacety1)-n-propylesters with those of racemic and enantiomerically pure authentic samples and were further supported by chiroptic comparison. The observed n-face differentiation of the electrophilic amination process was rationalized by the authors [ 14bl. NMR Nuclear Overhauser experiments agree with the (E)-configuration of the 0-silyl ketene acetals 35 and with a syn-periplanar disposition of the C’-OSi and C2-Ha bonds. Electrophiles “E”’, such as Lewis acidsco-ordinated DTBAD, attack 35 preferentially from the less hindered C(a)-Si (back) face (Scheme 17).
76
Genet, Greck and Lavergne
Scheme 17
In summary, this methodology is a predictable enantioselective entry to (29-aamino acids. (2R)-a-Amino acids could be obtained in the same manner, starting from the commercially available antipode of the alcohol 32. These methods have the following advantages : (i) stereomeric excesses in the range 78-91 %; (ii) good chemical yields; (iii) both enantiomers of the chiral auxiliaries are commercially available materials; (iv) the chiral auxiliaries can be recycled; and (v) the absolute configuration of the reaction products is easily predictable.
3.3.2 Electrophilic Amination of Chiral Imide Enolates Chiral glycine enolate synthons have been employed in diastereoselective alkylation reactions [IS]. A complementary approach to the synthesis of a-amino acids is the electrophilic amination of chiral enolates developed by Evans [ 161. Lithium enolates derived from N-acyloxazolidinones38, reacted readily with DTBAD to produce the hydrazide adducts 39 in exceIlent yields and diastereoselectivities (Scheme 18). Carboximides 38 were obtained by N-acylation of (S)-4-(phenylmethyl)-2-oxazolidinone and the lithium-2-enolates of 38 were generated at -78 "C in THF under inert atmosphere using a freshly prepared solution of lithium diisopropylamide (LDA, 1.05 equiv.) [17].
77
3.3 Dialkylazodicarboxylates
1) LDA
2) DTBAD
Yield = 91 - 96 O h de = 94 - 99 Yo
f-Bu02CNH
CHpPh
39
In all experiments the lithium enolates (0.12M in THF) reacted instantaneously with DTBAD (1.2equiv., 0.19M in CH,Cl,). After a reaction time of 1 to 3 min, the reactions were quenched with acetic acid. After chromatography, the diastereomerically pure hydrazides 39 (> 300/1)were isolated in yields exceeding 90%. The authors favored a pericyclic transition state for the reaction of DTBAD with the lithium imide enolates. Several transition structures for this reaction are possible; the high degree of organization can be achieved through co-ordination of the lithium atom with either the carbonyl or the nitrogen of DTBAD. The first type of coordination involves an 8-centered pericyclic transition state, while the second type gives 6-centered pericyclic structures which are now commonly accepted. The following transition state structure might be favored on the base of steric hindrance (Scheme 19).
Scheme 19
Three types of reactions were possible for the non-destructive removal of the oxazolidinone auxiliary (Scheme 20) : 0 0 0
hydrolysis (2.3equiv. of LiOH; THF/H,O (2:l);3 h; 0°C) methanolysis (2 equiv. of MeOMgBr, 0.08 M in MeOH; 0.5 h; 0°C) benzylalcohol transesterification (2 equiv. of PhCH,OLi, 0.14 M in THF; 2 h; -50 "C).
78
Genet, Greck and hvergne
39
40 a, b, c R = H, Me, Bn
Scheme 20
These cleavages proceeded generally in good yields with no perceptible racemization for the following substrates: R = CH,Ph, CHMe, and CMe,. Hydrolysis of the hydrazide 39 R = Ph afforded the derived acid 40 with no more than 2 % racemization. In contrast, the more highly basic conditions required for the transesterification caused considerable racemization, and the benzyl ester 40 was obtained in 22 % ee. Enantiomerically pure a-hydrazino and a-amino acids were generated from hydrazides 40 by deprotection of the carbamates and hydrogenolysis of the hydrazine bond (Scheme 21).
Yield of 41 (%)
*
'$OR'
FBoc
BocNH
1) TFA, CH2C12 2) HP,Raney-Ni, 500 psi, rt 3) (+)-MTPA-Cl, Et3N
R$OR' NH (+)-MTPA
Diastereomeric ratio (2s):(2R)
CH2Ph
94
>200:1
Ph
99
99 : 1
Scheme 21
The unpurified a-amino esters obtained after the two first steps were acylated with (+)-MTPA chloride (MTPA = a-methoxy-a-(trifluoromethy1)phenylaceticacid) to afford the (+)-MTPA amides 41. In the case of R = CH,Ph, the final compound 41 was found to be identical to the (+)-MTPA amide derived from L-phenylalanine.The (2s) configuration was correlated for 41 and capillary GC analysis proved that the diastereomeric ratio (2S):(2R) was > 200:l.
3.3 Dialkylazodicarboxylates
79
Using a similar approach, Vederas and co-workers reported the electrophilic amination of lithium enolates of chiral carboximides with various dialkylazodicarboxylates [18] (Scheme 22).
43
42 Scheme 22
Table 3.3
R
R'
Yield of 43 (%)
Diastereomeric ratio (2R):(2S)
91 92 83 88 90 88 85
90:10 69:31 75:25 94:6 93:7 97:3
By treatment with 1.1equiv. of LDA in THF at -78 "C, the chiral carboximides 42 were converted to their Z-enolates which were treated with a solution of alkylazodicarboxylates 4 (1.1 equiv., 0.8 M in THF) at -78 "C. The reaction mixtures were immediately quenched with aqueous NH,Cl to give the hydrazides 43. The diastereomeric ratios were determined by HPLC: these indicated that the natures of the substituents of both the substrate and the dialkylazodicarboxylate influence the stereoselectivity. The diastereoselectivity increases with the size of the R and R' groups: R = Me < CH2Ph < i-Pr and R' = Me < Et < CH,Ph r-Bu (Table 3.3). Classical methods for removal of the chiral oxazolidinone moiety such as benzyl alcohol transesterification, caused some epimerization at the newly aminated center. The use of anhydrous LiSH (1 equiv., THF, 20 "C, 10 min) was successful and the cleavage occurred without sensible epimerisation. Treatment of the resulting reaction mixture with THF/CH,CO,H (1 :1 mixture, 40 % in H20) gave the carboxylic acids 44 in 76- 85 % yields. Compounds 44 were hydrogenolyzed under classical conditions (H2, PdC)to the free a-hydrazino acids which were converted to the a-amino acids 45 by subsequent cleavage of the N-N bond in the presence of Raney-Ni (500 psi, 10 % aqueous AcOH) with 80-95 % yield (Scheme 23).
-
80
Genet, Greck and Lavergne
1) LiSH
R'O2CN . / $ R'O2CNH Pr
2) THF I CH3CO3H
43
'$OH R'02CN / R'02CNH
1) H2, Pd/C
+
2) Hz, Raney-Ni
'$OH NH2
44
Scheme 23
Recently, a stereoselective synthesis of carbon-linked analogues of a- and P-galactoserine glycoconjugates has been reported using asymmetric enolate methodology [19]. The key step involved the electrophilic amination of a chiral oxazolidinone enolate with DTBAD. In conclusion, the amination of enolates of N-acyloxazolidinoneswith dibenzyl or di-t-butylazodicarboxylatespresented the following properties: (i) diastereomeric excesses in the range 80-98 %; (ii) good chemical yields; (iii) efficient route to both chiral a-hydrazino and a-amino acid derivatives; and (iv) non-destructive removal of the chiral oxazolidinone auxiliaries.
3.3.3 Electrophilic Amination of Chiral Ester Enolates 3.3.3.1 P-Hydroxy Esters Chiral P-hydroxy esters and 1,3-dioxan-4-ones are well-known substratesfor diasteroselective a-alkylation reactions developed by Frater [20] and Seebach [21]. These c h i d compounds are available in both enantiomeric forms, and have been also aminated at the a-carbon with high stereoselectivity. Two reports appeared simultaneously in 1988 describing the electrophilic amination with DTBAD of P-hydroxybutyrate and its 1,3-dioxan-4-0ne protected form [22] and of various 0-hydroxy esters [23]. The authors obtained similar results. P-Hydroxy esters 46 or 48 were deprotonated at the a-carbon with LDA (2 equiv.) in THF at low temperature and the resulting enolates reacted rapidly with DTBAD at -78°C to give an easily separable mixture of syn and anti adducts 47 or 49 in which the anti diastereomer was the major compound. The adducts are very useful intermediates since compounds with anti stereochemistry are not easily accessible by other established methods for a-amino P-hydroxy acids synthesis (Schemes 24 and 25).
45
81
3.3 Dialkylazodicarboxylates 1) LDA P 2) DTBAD, -78 "C, H3C =OR
H3C=OR
THF, 3 min
BoCE,
Yield (Yo)
46
+
H3C?OR BocN,
NHBoc
NHBoc
syn 47
anti 47
R = CH3
58
82
18
R = C2H5
57
77
23
Scheme 24
XOR
1) LDA P 2) DTBAD, -78 "C, H 3 C y O R THF, 3 min BocN, NHBoc
H3C
Yield (%)
48
+
H3C
.
, NHBoc
Boci
syn 49
anti 49
R = CH3
75
84
16
CF3
62
87
13
C6H13
74
90
10
C5H11
81
85
15
Scheme 25
'
Subsequently, as an application of this method, D-ribo-C ,-phytosphingosine has been prepared stereoselectively from (S)-malic acid dimethyl ester 50. The electrophilic aminating reaction with DTBAD proceeded with 62 % yield and the anti ahydrazino P-hydroxy ester 51 was obtained as the major diastereomer (anti:syn = 67:33). After separation of the two isomers, the synthesis of the enan52 has been achieved [24] (Scheme 26). tiopure tetra-acetyl-D-ribo-C1,-sphingosine
OH &C02Me MeO&
--
OH
0
TBDPSOJJLOMe BocN, NHBoc
50 Scheme 26
51
--
OAc ~-CI~HZS G
NHAc
O 6Ac
52
A
C
82
Genet, Greck and Lavergne
Starting from (3-ethyl-P-hydroxybutanoate53, different synthetic applications have been developed such as the preparation of synthetic equivalents of 2,4deoxy-2-amino-L-threose 54 and L-erythrose 55 [25], and the obtaining of 4-acetylamino-2,4,6-trideoxy-L-ribo-hexose 56 [26], of N-acetyl-L-tolyposamine 57 [27] and of cis-monobactams 58 [28] (Scheme 27).
1
CHO
CHO
55
54
53
56
58
Scheme 27
The moderate diastereose..xtivities observe in the electrophilic amination of phydroxy esters with DTBAD were due to the acyclic nature of the substrates. When the P-hydroxybutanoic acid was protected as 1,3-dioxan-4-0nes, deprotonation and amination afforded the a-hydrazinodioxanones 60 in good yields and high diastereomeric excesses [22,29] (Scheme 28).
-
R
R
Yield
(“N
(“/4
CH2CHZPh
95
>95
H
90
>95
1) LDA
2) DTBAD, -78 “C, THF, 3 min
H3C
: EbCi,
59
NHBoc
de
60 Scheme 28
An additional bulky group on the dioxanone moiety was not required for stereoinduction, and an excellent diastereomeric excess was obtained starting from 59 when R = H. Enantioselective synthesis of D-allothreonine 61 has been achieved from 60 (R = CH,CH,Ph) with 42 % yield [22]. (3-Trifluorothreonine methyl ester 63 has also been synthesized in 57 % yield from the 2-t-butyl-l,3-dioxan-4-ones 62 using a related approach [30] (Scheme 29).
3.3 Dialkylazodicarboxylates
83
61
I ) fBuLi, DTBAD 2) HCI, MeOH
ho
3) H2. PtO2
F3C
62
*
F3C=OMe fiH2
63
Scheme 29
This method gives the aminated products with complete control of stereochemistry, and the subsequent deprotection and hydrogenolysis of the hydrazine functionality yield the desired a-amino P-hydroxy acid derivatives. Another alternative to obtain high anti diastereoselectivity for the electrophilic amination of P-hydroxy ester enolates has been designed using the chelation of the dianion by higher organometallic species [29]. If the enolate was generated with 2 equiv. of LDA-t-BuOK or with LDA in the presence of Ti(0i-Pr), or EbZn, the aminating reaction with DTBAD afforded only the anti a-hydrazino P-hydroxy ester in low yield. In contrast, the use of LDA as base in the presence of MeZnBr gave the anti product 65 in chemical yields up to 70 %. The best experimental conditions were defined as follows (Scheme 30, Table 3.4): 1. Dropwise addition of a P-hydroxy ester THF solution to a THF solution of MeZnBr (1 equiv.) at 0 "C. 2. Cooling at -78 "C and dropwise addition of a solution of LDA (2 equiv.) in THF. 3. Dropwise addition of a THF solution of DTBAD (2 equiv.) at -78 "C. Stirring for 10 min. 4. Hydrolysis at -78 "C with a saturated aqueous solution of NH4Cl.
64
Scheme 30
65 de >98 %
84
Genet, Greck and Lavergne
Table 3.4
Entry
R'
Yield (%)
C
63 58 66
d
69
a
b
e
70
BnO
CI
f
E t w
Me
h
(MeO),CHCH2
CH3
53
CH,
55
CH3
66
Functionalized P-hydroxy esters 64 e,f,g,h were obtained quantitatively with excellent enantiomeric excesses (> 98 %) by hydrogenation of P-ketoesters in the presence of chiral ruthenium catalysts. This convenient methodology gives both optical antipodes with equal ease using (R) or (9atropoisomer ligand for the metal complex. The first transition metal catalysis using BINAP-ruthenium complex in homogeneous phase for enantioselective hydrogenation of P-ketoesters was developed by Noyori and co-workers [31]. Genet and co-workers described a general synthesis of chiral diphosphine ruthenium(II) catalysts from commercially available [32]. These complexes preformed or prepared in situ (COD)R~(2-methylallyl)~ have been found to be very efficient homogeneous catalysts for asymmetric hydrogenation of various substrates such as P-ketoesters at atmospheric pressure and at room temperature [33]. By coupling the two sequential reactions: catalytic hydrogenation and electrophilic amination, a general and practical method for the preparation of both enantiomers of anti-a-hydrazino-P-hydroxy esters (R,R)-65 and (S,9-65 from the corresponding P-ketoesters 66 has been proposed, and different synthetic applications have been developed [le] (Scheme 31).
85
3.3 Dialkylazodicarboxylates
cat : (R)-L2*RuBr2
/ 1) hydrogenation R' H
O
66
R
Z
\
2) electrophilic amination
cat : (S)-L2*RuBr2
R' m
*
O
R
2
R302Cfi-NHC02R3
-
(RW-65
(S9-65 Scheme 31
Starting from (R,R)-65e, the synthesis of the non-natural amino acid (2R,3R)-2hydroxy-rn-chloro-p-hydroxyphenylalanine,component of vancomycin, has been described [34]. a-Hydrazino- p-hydroxy esters 65 are also chiral building blocks for the synthesis of functionalized nitrogen heterocycles. (3S,4S)-4-Hydroxy-2,3,4,5-tetrahydropyridazine-3-carboxylic acid 67, component of luzopeptine A [35], (2R,3R)-3-hydroxypipecolic acid 68 [36] or (-)-swainsonine 69 [37], and trans-3-hydroxy-D-proline70 [38] were synthesized (Scheme 32).
67
68
69
70
U
a
(S,S)-65f
(S,S)-65h
Scheme 32
In conclusion, the electrophilic amination of chiral P-hydroxy ester enolates with DTBAD presents the following advantages : (i) diastereomeric excesses > 98 96 by using MeZnBr as chelating complex; (ii) the obtainment of both antipodes of anti ahydrazino-P-hydroxy esters is possible starting from a j3-ketoester by coupling catalytic hydrogenation and electrophilic amination; and (iii) anti a-hydrazino-p-hydroxy esters are the synthetic precursors of various natural and unnatural products of biological interest.
86
Genet, Greck and Lavergne
3.3.3.2
P- Aminoesters
In 1988, Seebach and co-workers described the diastereoselective alkylation and amination of 3-aminobutanoic acid [39]. The enantiomerically pure 3-aminobutanoic acids (R)- and (9-71 were obtained by preparative HF'LC separation of two diastereomers resulting from the addition of (9-phenylethylamine to methyl crotonate and subsequent hydrogenolysis. After classical benzoylation and esterification, (R)- and (9-72 were available (Scheme 33). 1) BzCl NaOHIH20
OH
BzNH
2)MeqSiCI(2.2equiv.1
0
&OMe
Scheme 33
(S)-Methyl-3-(benzoylamino)butanoate(9-72 is also available by enzymatic resolution with pig liver esterase. Alkylation and amination were run on the racemic compounds. One example of electrophilic amination is reported starting from rac-72 which is doubly deprotonated with LDA at low temperature (-60 "C to -45 "C).The enolate intermediate adopts an ( E ) configuration. After treatment at -70 "C with DTBAD (1.2 equiv.) in THF,the product 73 is obtained with 96 96 yield and an excellent diastereoselectivity: de > 99 % in favor of the anti-diastereomer (Scheme 34). The absolute configuration of the created stereogenic center was assigned by chemical correlation with the known anti-2,3-diaminobutanoicacid.
BzNH
U
0
O
M
LDA (2.2 equiv.)
e
rac-72
0 1) DTBAD (1.2 equiv.) -70 "C
-60 "Cto - 45 "C THF
BocN-NHBoc
73 Scheme 34
More recently a stereoselective synthesis of (3S)-N-Pf-3-aminoaspartate(Pf= 9phenylfluoren-9-yl) by reaction of N-Pf-aspartate enolates with electrophilic aminating reagents was reported by Sardina and co-workers [40].Electrophilic aminations were run using trisylazide or dialkylazodicarboxylates:DTBAD and DBAD. N-Pf-
87
3.3 Dialkylazodicarboxylates
aspartates 74 were treated with different bases (1.2equiv.) to generate the enolates in THF at -78 "C. The enolates were allowed to form for 1 h at -55 "C, and after cooling the reaction mixture at -78 "C, a precooled (-78 "C) solution of azodicarboxylate (1.3 equiv.) in dichloromethane was added via cannula. After 4.5 min, the reaction was quenched with AcOH. Classical work-up and flash chromatography afforded the aminated products with the anti diastereomers as the major stereomers (Scheme 35; Table 3.5). RO~CN-NHCOZR
1) base, THF -78 "C to -55 "C
*
2) R02CN=NC02R
Me02C/YC NHPf oZMe
?f
Me02C' V 2 M e
Me02C
NHPf
-78 "C 3) AcOH
74
R02CN-NHC02R
NHPf
anti 75
syn 75
Scheme 35 Table 3.5 R = t-Bu
Base
LHMDS BuLilLHMDS (113) KHMDS LHMDS (HMPA)
R=Bn
antihyn
Yield (%)
anti/syn
Yield (%)
2.511
83 85 82 80
211 111 111 1811
79
2.311 21 1 301 1
85 80
75
The stereochemistry of the 3-hydrazinoaspartates 75 (R = t-Bu) was established by chemical correlation with dimethyl-N,N'-bis(benzyloxycarbonyl)-3-aminoaspartate and with 1,3-bis(benzyloxycarbonyl)-4,5-bis(methoxycarbonyl)imidazolidin-2one. The authors proposed that the reacting enolate be an equilibrium mixture of an open form 76 and a chelated form 77,both of which have the bulky N-Pf group in the equatorial position (Scheme 36).
H\
L
-
L
Scheme 36
Pf @Re
N'
0 kJl:C Me0
H
O2Me
k'
L'
76
C02Me
'L
77
88
Genet, Greck and Lavergne
The open form would be favored by strongly coordinating ligands (HMPA) or by the use of K+, as the enolate counterion and the electrophilic amination would occur on the Si-face of the enolate leading to the anti-aminated product.
3.3.4 Electrophilic Amination of Ketone Enolates Enolate anions derived from 2-substituted2-acyl-l,3-dithiane- 1-oxideswere diastereoselectively aminated using DTBAD as the nitrogen electrophile [41]. The lithium enolate of anti 2-ethyl-2-propanoyl-1,3-dithiane-1 -oxide 78 was generated using LiHMDS (1.1 equiv.) in dry THF at -78°C and transferred by cannula to a precooled solution of DTBAD (1.1 equiv.) in dry THF at -78°C. After allowing 10- 15 rnin for reaction with DTBAD at -78 "C, the reaction mixture was quenched at -78 "C using acetic acid. The desired aminated product 79 was isolated in 52 % yield and characterized as a single diastereomer: only one product isomer being detectable by 400 MHz 'H N M R spectroscopy. If the reaction mixture was allowed to reach room temperature over 12 h before quenching with aqueous NH,C1 and normal work-up, the aminated product was obtained with a similar yield but as a 2:l mixture of inseparable diastereomers. The major diastereomer proved to have the same stereochemistry for both 78°C and room temperature quench (Scheme 37). Under the same conditions, the syn compounds 78 gave predominantly 80 as the major stereomer (Scheme 38).
0-
1) LIHMDS, -78 "C, THF
*
2) DTBAD, -78 "C, THF, 15 min
3)CHBCO~H,-78 "C
<+ 0-
s
Npoc
NHBoc
anti 78
79
Scheme 37
1) LiHMDS, -78 "C, THF
0'
*
2) DTBAD, -78 "C, THF, 15 rnin 3) CH3C02H. -78 "C .
S
NBoc \
NHBoc
syn 78 Scheme 38
80
3.3 Dialkylazodicarboxylates
89
Variation of 2-alkyl substituent exerted an effect upon diastereoselectivity. The best diastereoselection was obtained when incorporating a 2-ethyl substituent for acyl dithiane oxides (Table 3.6). The diastereoselectivity and the sense of induced stereochemistry can be rationalized on the basis of a simple chelation control model.
Table 3.6 Substrate
R
R'
syn 78
CH3 CH3 H CH3 CH3 CH3 H
'ZH5
anti 78
CH3 CZH5 'ZH5 C6H5
CH3 C2HS
Yield (%)
Diastereomeric ratio (%)
42 76 89 48 37 69 72
12:l 3:1 2 99:l 2.7:1 2: 1 -
Both enantiomers of the 2-ethyl- 1,3-dithiane-1-oxide starting material may be prepared selectively in up to optical purity. The aminated products are of interest as potential synthons for chiral synthesis of both enantiomers of a-amino acids. Electrophilic amination of a-arylketone enolates was involved as a key step in the synthesis of P-aminotetralin derivatives. Dibenzylazodicarboxylate 4b was employed as electrophilic aminating reagent. In a first approach, the electrophilic amination with DBAD was followed by a highly stereoselective reduction [42]. In a second approach, a diastereoselective synthesis of the C, symmetric 2,3-diaminotetralin was performed using a highly stereocontrolled electrophilic amination as the key step of the procedure. Starting from the N,N-dibenzylprotected &amino acid 81, the synthesis of the trans-2,3-diamino-1,2,3,4-tetrahydronaphtalene84 was reported
WI. For the elaboration of the synthesis, the p-amino acid 81 was used in its racemic form and was activated with thionyl chloride in dichloromethane for the ring closure. After treatment with AlC1, at room temperature, the aminotetralone derivative 82 was obtained. For the introduction of the electrophilic nitrogen, the ketone 82 was deprotonated with n-BuLi (1.2 equiv.) in the presence of HMPA (10 equiv.) in THF at -78°C. After 2 h, a solution of DBAD (1.5 equiv.) in THF was added, the mixture was stirred at -78 "C for 2 h, after which LiEt,BH was added to the crude aminating reaction mixture at dry ice temperature. After warming to room temperature, the cis-oxazolidinone 83 was formed by intramolecular transesterification and isolated in 56 % yield. The synthesis of 84 was completed by a hydrogenolytic degradation (Scheme 39).
90
Genet, Greck and Lavergne
1) SOClp, CH2C12 rt, 3 h, 86 %
2) AIC13, CH& rt, 0.5h, 81 %
NBn2
*
&N&
81
82
1) n-BuLi, HMPA THF, 2 h, -78"C
*
82
&
1) MeOH, H29 Raney-Ni rt, 1 h
'NHCbz
2)DBAD, 2 h, -78"C 3)LiEbBH, -78"C,16 h
2) H2, Pd(OH)Z/C rt, 2 h
NBnp
56 % yield
83
84
Scheme 39
On the other hand, an effective synthesis of P-aminotetralins including an asymmetric electrophilic amination by dialkylazodicarboxylateswas reported by the same authors [MI. a-Tetralones 85 were transformed into chiral imines 86 using various enantiomericallypure amino ethers. The imines were treated with DTBAD or DBAD to afford the aminated products 87 which are the precursors of the non racemic paminotetralins 88 (Scheme 40; Table 3.7).
85
86
x
H3COCHzC
A
R,&7
1) LDA, THF, -35 "C
H3COCH2C fOzR3
fo2R3
2)d02CN=NC02R3,THF, -78 "C
*
Or
N\ NHCO~RS
B : R302CN=NC02R3,THF, rt 87a
2)H2, WIC, 12-15 bars, EtOH, 70-75 "C 3)TFNCH2C12 (1:l)
Scheme 40
..d\ NHCO&
& JR l
87b
+ R1w
1) NaBHzCN, glacial AcOH, MeOH, rt
4) HP, Raney-Ni, 50 bars, MeOH, rt
+
88a
88b
3.3 Dialkylazodicarboxylates
91
Table 3.7 Entry
1 2 3 4 5 6
R'
H H H H H OCH,
R2
Bn Bn i-Bu i-Pr t-Bu i-Pr
R3
Bn t-Bu r-Bu t-BU
t-Bu r-Bu
Aminated product Yield; de of 87 (%) A
B
66; 40 86; 72 82; 76 -; 38 85; 46 -
72; 5 0 84; 74 85; 64 85; 58 85; 14 -
P-Aminotetralin Yield; ee of 88 (%) 51; 58 57; 72 54; 73 42; 76 26; 84
Deprotonation of the imine 86 (R' = H, R2 = Bn, entry 1) with LDA (1 equiv.) at -35 "C afforded an azaenolate which was diastereoselectively attacked at -78 "C by the electrophilic reagent DBAD (1.5 equiv.). After 3 min the reaction was quenched with a 10 % aqueous NH,Cl solution. After classical work-up and flash chromatography, the aminated product 87 was obtained in 66% yield as a 7:3 mixture of diastereomers 87a:87b (method A). The major diastereomer was characterized by 'H NMR spectroscopy (DMSO-d6,100 "C). Due to an imine-enamine tautomerism, 86 could be aminated without previous deprotonation; 86 reacted with DBAD (1.4 equiv.) in THF at 0 "C for 1 h. After evaporation of the solvent and flash chromatography, 87a and 87b were isolated in 72 % yield with a diastereomeric ratio of 7525 (method B). Analogous reactions were performed with DTBAD (entries 2, 3, 4, and 5). The absolute configuration of the created stereogenic center at the 2 position turned to be
(9.
P-Aminotetralins 88 were obtained after reduction of the imine functionality, reductive removal of the chiral auxiliary and deprotection and hydrogenolysis of the hydrazino group. The ee of the fhminotetralins were determined by HPLC analysis after derivatisation of the amines with (R)-phenylethylisocyanate. 3.3.5 Electrophilic Amination of Phosphorus-Stabilized Anions Although some reactions of electrophilic amination of phosphorus-stabilized anions had already been reported in the literature [5a,d], the first example of such a stereoselective reaction opening access to optically active a-amino phosphonic acids was described in 1992 by Denmark and co-workers [45] and by Jommi and co-workers [46]. Both of these groups used chiral amino alcohols as auxiliaries for diastereoselective induction in the aminating process. Denmark and co-workers chose trisyl azide (2,4,6-triisopropylbenzenesulfonyl azide) as equivalent of "NHF', whereas Jommi and co-workers performed the reaction with DTBAD.
92
Genet, Greck and Lavergne
a-Alkyl a-aminophosphonic acids are being extensively studied because of their potential bioactivity in relation to amino acids and peptides. The methods described hereafter derive from the analogue electrophilic amination of chiral enolates, which constitutes a general approach to a-amino acids. The transfer of chirality from phosphorus to the a-carbon has been widely used in asymmetric synthesis of organophosphorus derivates [47].
3.3.5.1 Oxazaphospholanes Chiral2-alkyl-2-0x0- 1,3,2-oxazaphospholanes90and 91 were chosen by Jommi and co-workers as a substrate for theoretical and experimental studies on the prediction of the diastereoselectivity of the amination reaction leading to a new stereogenic center a to the phosphorus atom. Various molecules were considered for studying the influence of the five-membered ring conformations, and of the bulkiness of the ring substituents on the diastereomeric excess of the aminated products. Optically active (+)-ephedrine 89a and (-)-pseudo-ephedrine 89b were chosen as the chiral amino alcohols because of their relatively low cost and in view of the excellent results obtained in the similar asymmetric synthesis of a-amino carboxylic acids [ 131. The 1,3,2-oxazaphospholanes9Oa-c and 91a-c were obtained in excellent yields by cyclization of the amino alcohols 89a-c with ethyl phosphonic dichloride in toluene in the presence of triethylamine. The mixture of diastereomers at the phosphorus center were separated by silica gel chromatography. Assignation of the absolute configurations was possible through a complete analysis of the 'H N M R spectra of the diastereomers and was confirmed by X-ray analysis for one derivate (Scheme 41). Later on, Sisti and co-workers further investigated this field with the aim of designing more powerful chiral auxiliaries [48]. Varying the methyl group of (-)-pseudo-ephedrine derivatives, they increased the sterical demand by selecting phenyl or benzyl substituents. Having established by calculation the importance of the restriction of rotational freedom for the ethyl group attached to the phosphorus, they predicted that the best diastereoselectivity should be attained using the benzyl substituent. (lR, 2s)- 1,3-Dipheny1-2-(N-isopropylamino)-1-propano1 89d was prepared from R-(+)-mandelonitrile, and its subsequent cyclization with ethyl phosphonic dichloride afforded the two diastereomeric oxazaphospholanes 90d and 91d in ratios depending on the temperature of the reaction (Table 3.8).
3.3 Dialkylazodicarboxylates
91
90
89
93
Scheme 41
Table 3.8 Amino R' alcohol 89a 89b 89~ 89d
CH, CH, CH, H
RZ
R3
R4
R5
Temperature
90 H H H Bn
H Ph Ph Ph
Ph
H H H
CH, CH, i-Pr i-Pr
-20°C to rt -20°C to I? -20°C t o r t -35°C ll0"C
+
Yield
Diastereomeric ratio 90:91
90 80 90 80 58
I:1 1:l 1:2 12.6:l 1:1.3
+ 91 (a)
The 2-ethyl-2-0x0- 1,3,2-0xazaphospholanes 90a-c and 90a-c were deprotonated at -78 "Cusing LDA (1.1 equiv.) in THE The resulting carbanion was treated with di-tert-butylazodicarboxylate (DTBAD; 1.1 equiv.) at the same temperature, and the reaction mixture was quenched with glacial acetic acid after either 3 or 30 min, without any change in the yield and diasteroselectivity of the reaction. The diastereomeric ratios of hydrazino products 4 were determined by 'H and/or 31PNMR. The electrophilic amination of compounds 90d and 91d after deprotonation at -30°C with LDA (1.3 equiv.) in THF, was performed with DTBAD (1.2 equiv.) at -30°C and -65 "C without any change in the diastereomeric excess (Scheme 42; Table 3.9).
90 or 91 Scheme 42
92
94
Genet, Greck and Lavergne
Table 3.9 Substrate
Yield of 92 (%)
Diastereomeric ratio of 92 (%)
90a 91a 9Ob 91b 9oc 91c 9Od 91d
50 55 54 62 58 68 41 68
1:l 2: 1 151
3: 1 1.51
4:1 3.2: 1
11:l
The use of a molecular modeling program and the study of the geometry of the starting molecules (interatomic distances and five-membered ring conformations in compounds 90a-c and 91a-c) enabled the authors to rationalize the factors influencing the course of the reaction. The nitrogen substituent plays an important role (de increased with R = i-Pr), and the best selectivities were obtained with molecules possessing envelope-like or twist-like conformations. The prediction of the model and the experimental results proved to be in good agreement. These methods have enabled the investigation of a series of chiral oxazaphospholanes as precursors of optically active a-amino phosphonic acids. The stereoselectivity of the amination process is dependent on the substituents of the chiral auxiliary, and in some cases a good level of asymmetric induction has been achieved (up to 83 % de); unfortunately, no absolute configuration of the final products was determined.
3.3.5.2 Diazaphospholidines Another important source of chiral auxiliaries for the synthesis of optically active phosphorus derivates are the C, symmetric diamines such as 1,2-diaminocyclohexanes. In 1994, Hanessian and co-workers described the use of N,N’-dimethyl-(R,R)1,2-diaminocyclohexane93 as a chiral auxiliary in the synthesis of optically pure or enantiomerically enriched a-alkyl a-amino phosphonic acids [49]. Starting from easily accessible optically pure diamine 93, they synthesized in good yield (75 %) enantiomerically pure (R,R)-ethylphosphonamide 94 by condensation with ethyl phosphonic dichloride in benzene in the presence of triethylamine (Scheme 43).
3.3 Dialkylazodicarboxylates
-
Me
C I ,
Me
NEt3
0
11
CfP'
95
Benzene rl
Et
I
\
Me
Me
75% yield (RW-93
(RW-94
Scheme 43
With the C, symmetry of the chiral diamine, no new stereogenic center is created at the phosphorus atom, thus avoiding the need for a sometimes difficult separation of diasteroisomers, such as with amino alcohols. The phosphorus-stabilized carbanion of 94 was generated at - 100"C with LDA (1.2 equiv.) in THE Amination reactions were performed both with DTBAD and trisyl azide. Direct addition of a stoichiometric amount of DTBAD (1.1 equiv.) at - 100"C followed by acidic quench led to a mixture of hydrazino products 95 (major diastereomer indicated) in good yield and diastereoselectivity (Scheme 44).
Me
(9R)-94
Me
67 Yo yield
95
74%de
73 Oh yield
Scheme 44
The major diastereomer 95 could be obtained in optically pure form by silica gel chromatography. The absolute configuration of the amination product was dictated by the choice of the chiral diamine, and correlated with previous results in asymmetric a-alkylation. Furthermore, the major diastereomer 95 was converted to the corresponding (R)-a-aminoethyl phosphonic acid 96 by sequential treatment with: (i) TFA, CH,CI,, 0 "C; (ii) 1 N HC1; and (iii) H,, PtO,, 70 psi, followed by Dowex 50 (H+) resin chromatography in 73 % overall yield. Optical rotation of the a-amino phosphonic acid 96 allowed the confirmation of its optical purity (> 98 %) and of its absolute configuration. In the course of a study on electrophilic amination of achiral phosphonates, Maffre and co-workers described a single example starting from the same chiral phosphonamide 94, and obtained a 4:l mixture of diastereomers 95 in 33 % yield [50].
96
96
Genet, Greck and Lavergne
3.4 Chiral Electrophilic Aminating Reagents 3.4.1 Azodicarboxylates and azodicarboxamides The preparation of chiral dialkylazodicarboxylates and their use as electrophilic enolate amination reagents, were first reported in 1995 by Vederas and co-workers [51]. A series of chiral dialkyl (menthyl 97a, bornyl 97b, isobornyl 97c) azodicarboxylates were prepared by conversion of the corresponding alcohols into chloroformates, condensation with hydrazine and oxidation with N-bromosuccinimide and pyridine. Compounds 97 were obtained in 35-50 % yield (Scheme 45).
R-OH
coc12
0 II
R-O-C-CI
N2H4
NBS
ROZCC-NH-NH-CO~R
pyridine
R02C-N=N-C02R
97
Scheme 45
Ester enolates generated by treatment of the corresponding esters with 1 equiv. of LiHMDS at -78 "C, were aminated by the chiral dialkylazodicarboxylates 97 at -78 "C (Scheme 46).
1) LiHMDS 2) R02CN=NC02R
97
98 Scheme 46
*
RiYcox +
R02CN
\
R'-COX R02Cr;i
\
R02CNH
R02CNH
(9-99
(R)-99
97
3.4 Chiral Electrophilic Aminating Reagents Table 3.10 Entry
97
R2
X
1 2 3 4 5 6 7
a a b
OEt OEt OEt OEt OEt OEt NMe,
8
C
Ph CH,CO,Et Ph Ph CH,CO,Et CH,CO,Et CH3 CH(CHJ2
C
b C
C
me2
Yield (%)
(S)-99:(R)-99
59 13 57 42 49 41 12 87
2: 1 1:l 1:l 1:l 1:l 1:1
1:l 1:l
The reactions of electrophilic amination displayed little if any stereoselectivity (Table 3.10, entries 1 to 6). The chromatographic separation of the diastereomers was generally quite difficult. The menthyl and bornyl carbamate moieties in products 99a and 99b proved to be very stable and difficult to remove, even with prolonged reflux in 6 M HCl or concentrated HBr, and the corresponding a-hydrazino acids could not be obtained in reasonable yield. However, the isobornyl99c analogues were readily hydrolyzed. Anions generated from tertiary amides preferentially assumed the Z-configuration. Reaction of N,N-dimethylamides with 1 equiv. of LDA at -78°C followed by addition of 1.5 equiv. of di(-)-isobornyl azodicarboxylate 97c gave in each case a 1:l ratio of diastereomers (R)-99 and (9-99 (Table 3.10, entries 7 and 8). Double diastereoselection was tested with chiral enolates: enantiomerically pure N-acyloxazolidinone (9-100 and its enantiomer (R)-100 were aminated at -78 "C with 97c (Scheme 47).
(q-100
(S,S)-101
(S)-102
(9-100
(R,R)-101
(R)-102
Scheme 47
In both cases, only one diastereomer could be detected using high-temperature 'H NMR spectroscopy. Removal of the oxazolidinone auxiliary from compounds (S,S)-lOl and (R,R)-101 by treatment with lithium hydroperoxide followed by acidification and treatment with diazomethane generated the corresponding methyl esters (9-102and (R)-102which have opposite configuration at C2. Amination of either
98
Genet, Greck and Lavergne
compounds (S)-lOO or (R)-100 with dibenzylazodicarboxylate4b gave a 9:l ratio of diastereomers with the same relative stereochemistry. In conclusion, the geometry of the Evans enolate completely controls the diastereoselection, and the effect of the isobornyl moieties is solely to increase steric bulk and enhance the ratio. Macrocyclic azodicarboxylates containing a steroid skeleton were also synthetized using a similar synthetic route [52]. These compounds were trapped by Diels -Alder reaction with cyclopentadiene. Finally, a synthesis of a chiral azodicarboxamide containing a bridging binaphtyl moiety was described by Vederas and co-workers, and electrophilic amination reactions of achiral ester enolates were performed [53]. The chiral azocarboxamide 105 containing a binaphtyl group was prepared by an intramolecular cyclization between the bis-(N-methylamine) of 2,2-dimethyl-l,1 '-binaphtyl 103 and N,N'bis(azidocarbony1)hydrazine 104 followed by oxidation with N-bromosuccinimide (NBS)and pyridine in 15 % overall yield (Scheme 48).
1) EbN, CI~CHZCH~CI~ A, 20 h.
NHMe2 NHMe2
+
2) NBS, pyridine
N3'NH+H-"I
103
* 105
104
Scheme 48
Achiral oxazolidinones 106 were aminated at -78 "C using the standard procedure. Only one diastereomer could be detected for the products using 'HNMR spectroscopy, and X-ray crystallographic analysis of 107 (R = Me) showed that the new stereogenic center had the (S)absolute configuration (Scheme 49). Attempts to remove the binaphthyl moiety to produce the optically pure free a-hydrazino acid have been unsuccessful.
1) LDA, -78 "C
106 Scheme 49
107
Me
85
CH2Ph
92
3.4 Chiral Electrophilic Aminating Reagents
99
3.4.2 Chiral Catalytic Approach A catalytic approach to the synthesis of arylglycines was proposed by Evans and coworkers using enantioselective amination of N-acyloxazolidinones [54]. Metallobis(sulfonamide) complexes derived from chiral diamines are potential chiral catalysts. The magnesium-bis(su1fonamide) complex 109 was generated by treating (S,S)-bis(su1fonamide) 108 with dimethylmagnesium in dichloromethane (Scheme 50).
108
109
Scheme 50
The catalyzed amination of phenylacetylimide llOa employing the magnesium complex 109 (10 mol %) and N-methyl-p-toluenesulfonamide(20 mol %) in 2: 1 CH,Cl,/Et,O afforded the hydrazide l l l a with an enantiomeric ratio (2S):(2R) = 93:7 in 92 % yield (Scheme 51, Table 3.11 entry a).
DTBAD
0A & A r
U 110 Scheme 51
10 % moll09 20 O h rnol pTosNHMe
BNL
0
Boci, NHBoc
111
100
Genet, Greck and Lmergne
Table 3.11 Entry
Ar
Time (h)
Temperature ("C)
Yield (%) ~
a
Ph
b
P-F-C~H, P-CH~O-C~H,
(2s):(2R) ~
- 65
92 97 93
93:7 955 93:7
72
-75
85
91:9
e
60
- 75
84
90:10
f
48
- 95
87
91:9
48 48 48
- 75
d
C
- 65
Enantiomeric purities of compounds 111 were determined by HPLC using chiral column (Daicel-ChiralcelOD-H). This amination procedure is applicable to a variety of aryl-substituted imides (Table 3.11, entries b to f). The amination adducts 111 are all highly crystalline, and a single recrystallization of the product hydrazides led to enantiomeric enrichment (96 to 99 % ee). Finally, the potential for utilizing lower catalyst loading was demonstrated by the preparation of l l l c from llk in > 99 % ee and 81 % yield after recrystallization using 5 mol % of 109 and 10 mol % of N-methyl-p-toluenesulfonamide.The role of the latter compound in this catalytic process has not yet been completely elucidated, but a kinetic investigation revealed a first-order dependence of this addend on reaction rate. Asymmetric induction could be rationalized: the reaction proceeds via the intermediacy of a chelated tetrahedral magnesium enolate complex. The chelation of both the (2)-imide enolate and bis(su1fonamide)ligand to the tetrahedral magnesium ion enforced the conformational rigidity of the intermediate and the Si-enolate acarbon diastereoface was exposed to the incoming electrophile. Evans and co-workers described the first catalyzed enantioselective enolate-electrophile bond construction which could be extended to a general catalytic enantioselective approach to the synthesis of a-amino acids.
References
101
3.5 Conclusion Electrophilic amination is a general entry to chiral a-amino acids or functionalized pamino and P-hydroxy a-amino acids with an anti stereochemistry. The chiral enolate technology has been applied for the obtaining of C - N bond-forming reactions with stereochemical control. Only one example of catalytic approach has been reported recently. The vast arsenal of chiral catalysts that is presently available, signals that future chapters dealing with this approach will be considerably well documented.
References [ l ] a) E. Erdik, M. Ay, Chem. Rev. 1989, 89, 1947; b) J. Mulzer, Organic Synthesis Highlights, VCH, Weinheim, 1991, p. 45; c) R. M. Williams, Synthesis of optically active a-amino acids, Pergamon Press, Oxford, 1989, p. 167- 187; d) G. Boche, Stereoselective synthesis (Houben-Weyl), 1995, Vol. E21, p. 5133; e) C. Greck, J. P. Genet, Synleff 1997, 741. [2] D. A. Evans, T. C. Britton, J. A. Ellman, R. L. Dorow, J. Am. Chem. SOC. 1990, 112,4011. [3] a) 0. Diels, H. Behncke, Chem. Ber: 1924,57,653;b) Di-tert-butyl azodicarboxylate, M. Klinge, J. C. Vederas, Encyclopedia of Reagents for Organic Synthesis, John Wiley and Sons, Chichester, 1995, p. 1586; c) Dibenzyl azodicarboxylate, Y. Leblanc, ibid., 1995, p. 1532; d) Diethyl azodicarboxylate, E. J. Stoner, ibid., 1995, p. 1790. [4] a) W. Oppolzer, 0. Tamura, Tetrahedron Lett. 1990, 31, 991; b) W. Oppolzer, E. Merifield, Helv. Chim. Acta 1993,76,957;c) W. Oppolzer, 0.Tamura, G. Sundarababu, M. Singer, J. Am. Chem. Soc. 1992,114,5900; d) W. Oppolozer, J. Deerberg, C. G. Bochet, E. Merifield, Tetrahedron Len 1994, 35, 7015. [5] a) J. P. Genet, S. Mallart, C. Greck, E. Piveteau, Tetrahedron Lett. 1991,32, 2359; b) J. P. Genet, J. Hajicek, L. Bischoff, C. Greck, Tetrahedron Left. 1992,33,2677;c) C. Greck, L. Bischoff, A. Girard, J. Hajicek, J. P. Genet, Bull. SOC.Chim. FI: 1994, 131,429; d) C. Greck, L. Bischoff, F. Ferreira, J. P. Genet, J. Org. Chem. 1995,60,7010;e) J. P. Genet, C. Greck, Encyclopedia of Reagentsfor Organic Synthesis, John Wiley and Sons, Chichester, 1995, 898. [6] a) A. Casarini, P. Dembech, D. Lazzari, E. Marini, G. Reginato, A. Ricci, G. Seconi, J. Org. Chem. 1993,58,5620;b) P. Bernardi, P. Dembech, G. Fabbri, A. Ricci, G. Seconi, J. Org. Chem. 1999,64, 641. [7] a) D. A. Niederer, J. T. Kapron, J. C. Vederas, Tetrahedron Lett. 1993,34,6859;b) J. Vidal, J. Drouin, A. Collet, J. Chem. SOC. Chem. C o w . 1991,435; c) J. Vidal, L. Guy, S. Sttrin, A. Collet, J. Org. Chem. 1993, 58, 4791; d) J. Vidal, S. Damestoy, A. Collet, Tetrahedron Left. 1995, 36, 1439; e) J. Vidal, S. Damestoy, L. Guy, J. C. Hannachi, A. Aubry, A. Collet, Chem. Eur: J. 1997, 3, 1691. [8] G. Boche, C. Boie, F. Bosold, K. Harms, M. Marsch, Angew. Chem. Int. Ed. Engl. 1994, 33, 115. [9] For recent mecanistic studies of the electrophlic amination see : P. Beak, K. Conser Basu, J. J. Li, J. Org. Chem. 1999, 64, 521 8 and references cited therein. [lo] N. Zheng, J. D. Armstrong 111, J. C. McWilliams, R. P. Volante, Tetrahedron Lett. 1997. 38, 2817. [ 111 a) F. Ferreira, PhD thesis, University P. & M. Curie (FR), 1996; b) D. Lavergne unpublished work in these laboratories. [ 121 a) W. Lwowski, J. M. Maricich, J. Am. Chem. Soc. 1965,87,3630; b) S . Fioravanti, M. A. Loreto, L. Pellacani, P. A. Tardella, J. Oq.Chem. 1985,50,5365;c) S. Fioravanti, M. A. Loreto, L. Pellacani, P. A. Tardella, J. Chem. Research (S)1987, 310; d) S. Fioravanti, M. A. Loreto, L. Pellacani, P. A. Tardella, Tetrahedron 1991,47,5877;e) E. Felice, S. Fioravanti, L. Pellacani, P. A. Tardella, Tetrahedron Lett. 1999,40,4413; the same group also studied the asymmetric amination of chiral cyclic allylsilanes, M. A. Loreto, P. A. Tardella, D. Tofani, TefrahedronLett 1995, 36, 8295.
102
Genet, Greck and Luvergne
[13] C. Gennari, L. Colombo, G. Bertolini, J. Am. Chem. Soc. 1986, 108, 6394. [14] a) W. Oppolzer, R. Moretti, Helv. Chim. Acta 1986, 69, 1923; b) W. Oppolzer, R. Moretti, Tetrahedron 1988,44, 5541. [I51 R. M. Williams, Synthesis of optically active a-amino acids, Pergamon Press, Oxford, 1989, p. 1-133. [ 161 a) D. A. Evans, T. C. Britton, R. L. Dorow, J. F. Dellaria, J. Am. Chem. Soc. 1986,108.6395;b) D. A. Evans, T. C. Britton, R. L. Dorow, J. F. Dellaria Tetrahedron 1988, 44, 5525. [17] D. A. Evans, M. D. Ennis, D. J. Mathre, J. Am. Chem. Soc. 1982, 104, 1737. [18] L. A. Trimble, J. C. Vederas, J. Am. Chem. Soc. 1986, 108, 6397. [19] R. N. Ben, A. Orellana, P. Arya, J. Org. Chem. 1998, 63, 4817. [20] G. Frater, Helv. Chim. Acta 1979, 62, 2825. [21] J. Zimmermann, D. Seebach, T. K. Ha, Helv. Chim. Acta 1988, 71, 1143. [22] J. P. Genet, S. JugC, S. Mallart, Tetrahedron Lett 1988, 29, 6765. [23] G. Guanti, L. Banfi, E. Narisano, Tetrahedron 1988,44, 5553. [24] G. Guanti, L. Banfi, E. Narisano, Tetrahedron Lett. 1989, 30, 5507. [25] G. Guanti, L. Banfi, E. Narisano, Tetrahedron Lett. 1989, 30, 5511. [26] G. Guanti, L. Banfi, E. Narisano, S. Thea, Synlett 1992, 311. [27] G. Guanti, L. Banfi, E. Narisano, R. Riva, Tetrahedron Left. 1992, 33, 2221. [28] L. Banfi, G. Cascio, G. Guanti, E. Manghisi, E. Narisano, R. Riva, Tetrahedron 1994, 50, 11967. [29] C. Greck, L. Bischoff, F. Ferreira, C. Pinel, E. Piveteau, J. P. Genet, Synlett 1993, 475. [30] M. Gautschi, D. Seebach, Angew. Chem. Int. Ed. Eng. 1992, 31, 1083. [31] R. Noyori, T. Ohkuma, M. Kitamura, H. Takaya, J. Am. Chem. Soc. 1987, 109, 5856. [32] a) J. P.Genet, C. Pinel, V. Ratovelomanana-Vidal, S. Mallart, X. Pfister, M. C. Caiio de Andrade, J. A. Lafitte, Tetrahedron:Asymmetry 1994,5,665; b) J. P. Genet, C. Pinel, V. Ratovelomanana-Vidal, S. Mallart, X. Hister, L. Bischoff, M. C. Catio de Andrade, S. Darses, C. Galopin, J. A. Lafitte, ibid. 1994, 5, 675. [33] J. P. Genet, C. Pinel, V. Ratovelomanana-Vidal, M. C. Caiio de Andrade, X. Hister, P. Guerreiro, J. Y. Lenoir, Tetrahedron Lett. 1995, 36, 4801. [34] A. Girard, C. Greck, J. P. Genet, Tetrahedron Left. 1998, 39, 4259. [35] C. Greck, L. Bischoff, J. P. Genet, Terrahedron:Asymmetty 1995, 6, 1989. [36] C. Greck, F. Ferreira, J. P. Genet, Tetrahedron Lett. 1996, 37, 2031. [37] F. Ferreira, C. Greck, J. P. Genet, Bull. Soc. Chim. F,: 1997, 234, 615. [38] 0. Poupardin, C. Greck, J. P. Genet, Synlett 1998, 1279. [39] H. Estermann, D. Seebach, Helv. Chim. Acta 1988, 71, 1824. [40] E. Fernandez-Megia, M. M. Paz, F. J. Sardina, J. Org. Chem. 1994, 59, 7643. [41] P. C. B. Page, S. M. Allin, E. W. Collington, R. A. E. Can; Tetrahedron Lett. 1994, 35, 2427. [42] a) P. Gmeiner, B. Bollinger, Tetrahedron Lett. 1991.32, 5927; b) P. Gmeiner, B. Bollinger, Liebigs Ann. Chem. 1992, 273. [43] P. Gmeiner, E. Hummel, Synthesis 1994, 1026. [44] P. Gmeiner, B. Bollinger, Tetrahedron 1994, 50, 10909. [45] S. E. Denmark, N. Chatani, S. V. Pansare, Tetruhedron 1992, 48, 2191. [46] G. Jommi, G. Miglierini, R. Pagliarin, G. Sello, M. Sisti, Tetrahedron 1992, 48, 7275. [47] a) S. E. Denmark, C. T. Chen, J. Am. Chem. Soc. 1995, 117, 11879; b) Y.L. Bennani, S. Hanessian, Tetrahedron 1996.52, 13837; c) for a recent review on the asymmetric synthesis of organophosporus coumponds see 0. I. Kolodiazhnyi, Tetrahedron: Asymmetry 1998, 9, 1279. [48] R. Pagliarin, G. Papeo, G. Sello, M. Sisti, L. Paleari, Tetruhedron 1996, 52, 13783. [49] S. Hanessian, Y. L. Bennani, Synthesis 1994, 1272. [50] D. Maffre, P. Dumy, J. P. Vidal, R. Escale, J. P. Girard, J. Chem. Res. (S) 1994, 30. [51] J. M. Harris, E. A. Bolessa, A. J. Mendonca, S. C. Feng, J. C. Vederas, J. Chem. Soc. Perkin Trans. I 1995, 1945. (521 J. M. Harris, E. A. Bolessa, J. C. Vederas, J. Chem. Soc. Perkin Trans. I 1995, 1951. [53] J. M. Harris, R. McDonald, J. C. Vederas, J. Chem. Soc. Perkin Trans. 11996, 2669. [54] D. A. Evans, S. G. Nelson, J. Am. Chem. Soc. 1997, 119, 6452.
Modern Amination Mefhods Edited by Alfredo Ricci copyright 0 WILEY-VCH Verlag GmbH, 2wO
4 Glycosylamines as Auxiliaries in Stereoselective Syntheses of Chiral Amino Compounds Heiko Tietgen, Martin Schultz-Kukula and Horst Kunz
4.1 Introduction During the past few years carbohydrates have received increasing interest as stereodifferentiating auxiliaries in stereoselective syntheses. Since the first review in 1993 [ 11 which covered the synthetic possibilities of carbohydrate-derived auxiliaries in asymmetric synthesis, several hundred articles have been published describing carbohydrates as exhibiting efficient stereoselecting effects in asymmetric syntheses. This chapter will focus on the use of glycosylamines in the synthesis of biologically interesting compounds. Developments in asymmetric conversions using carbohydrates have recently been published in other reviews [2]. Although carbohydrates are cheap and readily available chiral compounds, their application in stereoselective synthesis was for a long time limited to ex-chiral-pool syntheses [3]. They have been considered too complex compared to other chiral auxiliaries, for example a-pinene in borane-chemistry [4] or BINAP-derivatives in reduction chemistry [5]. However, it has been shown during the past few years that carbohydrates can be successfully applied as stereodifferentiating tools in many different reaction types such as aldol- [6], hydrogenation- [7], carbonyl addition- [8], Michael- [9], Diels- Alder- [ lo], hetero-Diels- Alder [ 113, and rearrangement reactions [12]. In many cases, the substrate to be subjected to asymmetric conversion is coupled to the carbohydrate via the anomeric position. For the synthesis of amino compounds, the substrate is linked to the carbohydrate as a derivative of a glycosylamine. After completion of the asymmetric synthesis the product can be detached from the carbohydrate auxiliary by acidic hydrolysis. In most cases auxiliary and product can be separated by extraction or recrystallization techniques, and the carbohydrate auxiliary readily regenerated from its recovered detachment derivative. The class of carbohydrates offers many possibilities tuning the electronic and steric environments around the auxiliary-bound substrate. The steric shielding of the substrate can be varied by the choice of carbohydrate itself, and by the steric demand of groups attached to the neighbouring hydroxyl groups- these are often alkoxy-or ester groups (see Scheme 1).
104
Tietgen, Schultz-Kukulu and Kunz
OPiv
PivOk
N I0 H
2
2
Scheme 1
The higher steric demand of carbohydrate templates containing the pivaloyl ester usually results in a higher stereoselectivityin their reactions compared to those of the acetyl-protected analogues [ 131.
4.1.1 Exo Anomeric Effect The stereoelectronic situation of anomerically bound substrates is decisively influenced by the exo anomeric effect. Lemieux et al. [14] have found that the rotation around the exocyclic C-0-bond of glycosides is strongly hindered. This observation is interpreted as a delocalization of the lone pair of the oxygen into the CY*of the ring-C1-06bond of the carbohydrate. Analogous no* delocalization sterically adjusts glycosylamine derivatives in a preferred conformation (Scheme 2).
C'-N-projection
Scheme 2
The Newman projections illustrate that the lone pair electrons of the nitrogen should be preferentially antiperiplanar to the C'-06 bond. For a-anomers, the exo anomeric effect opposes the anomeric effect, thereby making the exo anomeric effect a more important conformational factor in equatorially orientated glycosides than in its a-anomeric analogues [15].
4.I Introduction
105
4.1.2 Influence of Coordinating Centers Carbohydrates easily complex oxygenophilic electrophiles, e.g., lithium cations and zinc(I1) chloride. The coordination between the carbohydrate moiety and the Lewis acids is an important factor which orients the auxiliary-bound substrate. The complexation of lithium cations through the carbohydrate moiety influences the reactivity and stereodifferentiation in carbohydrate-derived esters and their enolates [ 161. Coordination of the Lewis acid zinc(I1) chloride to glycosyl imines has strong influence on the stereodifferentiation in nucleophilic addition reactions to these imines (see Scheme 3).
Pivo
ppiv
complex A
Scheme 3
The zinc complex A is probably the reactive [ 171species in these conversions, as it activates the imine and tethers the carbonyl group of the ester group in 2-position with the anomeric imine. The Reside is shielded efficiently and the attack of nucleophiles at the Si-side of the imine is strongly favored.
4.1.3 Pseudo-Enantiomeric Carbohydrates in Stereoselective Syntheses A number of commonly used auxiliaries are available in both enantiomeric forms, for example the proline-derived auxiliaries RAMP and SAh4P [ 181 giving rise to the complementary stereoselecting reactions. However, many natural carbohydrates are available in only one configuration. The other enantiomer (usually the Lform) is very expensive in most cases and difficult to prepare. To overcome this limitation, readily available and cheap pseudo-enantiomeric carbohydrates can be used. Scheme 4 shows the pseudo-enantiomeric pairs D-galactose 3/D-arabinose 4 [ 191 and D-2-deoxyglucose 5L-2-deoxyrhamnose 6 [20].
106
Eetgen, Schultz-Kukula and Kunz
HO QH
PH
QH
D-arabinose
D-galactose 3
!
D-2-dso&umse
4
'
LQd~~rnnose 6
5
Scheme 4
D-Arabinose can be considered as an equivalent to L-galactose, as has been demonstrated in asymmetric Strecker syntheses [ 19bl.
4.2 Syntheses of Amino Acids 4.2.1 Syntheses of Enantiomerically Pure a-Amino Acids The stereoselective synthesis of a-amino acids is still an important goal in organic synthesis due to the growing importance of biomimetics. Schollkopf's asymmetric synthesis of a-amino acids is one of the most popular methods for the construction of enantiomerically pure a-amino acids [21]. Asymmetric variations of the Strecker synthesis of amino acids are of interest because only inexpensive and readily available substrates are required [22]. Stereoselective Strecker syntheses are achieved using glycosylamines, e.g., the tetra-0-pivaloyl-P-D-galactosylamine2 [23] as the chiral auxiliary. During this reaction galactosyl imines 7 of aldehydes with predominant E-configuration are formed [ 17,241. In the presence of zinc(II) chloride in isopropanol or tin tetrachloride in THF, these galactosyl imines 7 react with trimethylsilylcyanide (TMSCN) to give almost quantitatively the corresponding N-galactosyl-a-amino-nitriles 8 in high diastereomeric excesses (R:S 7- 13:1). The pure diastereomers are readily obtained by recrystallization from hexane. pivoOPiv
pivoOPiv
R-CHO
PivOk
N
OPiv
2
Scheme 5
b
Me3SiN PivO
A ZnCI,. ',-PIOH
b N y " BSnCI,,THF 7
H
PivO
a
R
4.2 Syntheses of Amino Acids
107
The hydrolysis of the pure R-aminonitriles 8a with HC1 and formic acid or HBr in acetic acid leads to the free D-amino acids 9 without racemization in high yields.
C P HCI, HCOOH or HBr t
CH3COOH
PivO
g,
H3N@
COOH
\
8a
CI
CI
Scheme 6
L-Amino acids 11are available by the same methodology using tri-0-pivaloyl-aD-arabinosylamine 10 as the chiral auxiliary [19b]. The stereoselectivity L:D 710:1 is slightly lower compared to that observed for the syntheses of R-aminonitriles 8 with galactosyl imines 7.The free a-amino acid is released from the auxiliary by hydrolysis with HCl in formic acid.
C P
a) R-CHO
PivO OPiv
b) Me3SiCN,SnCI,, THF c) HCI, HCOOH
10
m
H,&?COOH 50-1
R
11
Scheme 7
An alternative access to L-amino acids was found by using chloroform as solvent in the asymmetric Strecker synthesis with galactosyl imines [24]. This interesting reverse of asymmetric induction compared to the reactions shown in Scheme 5 can be explained by considering the zinc complex A as the crucial reactive species. Due to the exo anomeric effect, which is a delocalization of the n-electrons into the cr* of the ring C-0-bond, the imines adopt the conformation represented in Scheme 8.
108
Tietgen, Schultz-Kukula and Kunz
chloroform as solvent
THF as solvent Scheme 8
The conformation is proved by a significant NOE between the aldimine proton and the anomeric proton [ 17,241. In polar solvents, free cyanide attacks the complex A, preferably from the unshielded Si-side. In unpolar solvents like chloroform, cyanide is not set free from the silyl derivative. The activation of the cyanide proceeds by an interaction between the e m chloride of the zinc complex and the silyl group. Thus, the cyanide is directed to the Re-side of the glycosyl imine (see Scheme 8). This nucleophilic attack produces L-aminonitriles with moderate or good stereoselectivity (S:R 3-9:l) and high yields. The Ugi reaction provides another access to a-amino acid derivatives [25]. This important multicomponent reaction will be discussed in Section 4.2.4.
4.2.2 Syntheses of Enantiomerically Pure P-Amino Acids Glycosylamineswere shown efficient stereodifferentiatingtemplates in the synthesis of enantiomerically pure P-amino acids. They react with silylketene acetals and zinc(I1) chloride as the promoting Lewis acid via a Mannich-type pathway to give p-amino acid esters 12 in high yields and high diastereoselectivity [26], (Scheme 9).
OPiv
OSiMe,
PivO
p i v o & G y7
ZnCI,, >=(,Me THF, -30 "C
H
PivO 12
DV 20-200:1
Scheme 9
109
4.2 Syntheses of Amino Acids
The original assignment of the absolute configuration (3s) for products 12 based on a comparison of the optical rotation value with a reported one for the phenyl derivative [27] must be considered uncertain. It would contradict the preferred attack of the nucleophile from the unshielded back side and the stereoselectivity observed in the reaction of N-galactosyl imines 7 with prochiral bis-silyl ketene acetals [28]. N-Galactosyl p-amino acids 13 are produced from bis-silylketene acetals in high yields and excellent diastereoselectivity (Scheme 10). The configuration at the P-position is R.
H PivO
OSiMea PivO
ZnC12, THF, -30 "C
k
erythro
/ Q i P
OPiv
7
y
H
y
OH
OPiv 13
R
O
DV 20:1:O:O
Scheme 10
During this reaction, two new chiral centres are formed. The formation of one diasteromer with high selectivity shows the potential of the chirality transfer from carbohydrate templates. Conversion of the 2,3-diphenyl alanine into the corresponding 3-amino propanol proved the erythro configuration of the major diastereomer. Carbohydrate-derived homoallylamines have been demonstrated as being useful chiral synthons for the stereoselective synthesis of p-amino acids. With allyltributylstannane or allyltrimethylsilane as the nucleophiles, glycosyl imines form homoallylamines with high efficiency [29-3 13. Promoted by SnCl,, the nucleophile allyltributylstannane attacks from the sterically less hindered side.
SnC14,THF b
PivO
PivO 7a
Scheme 11
110
lletgen, Schultz-Kukula and Kunz
The product 14a is obtained in excellent diastereoselectivity(> 251) (Scheme 11). Zinc (11) chloride is not able to promote the nucleophilic addition. If the reaction temperature can be held below 10°C, no anomerization is observed. The Si-side attack is rationalized by a complex B between SnCl, and the glycosyl imine 7a (Scheme 12).
complex B
Scheme 12
The nucleophile attack of the allylstannane again proceeds at the unshielded Siside of the imine and finally leads to the desired homoallylamines with (S)-configuration. These homoallylamines (16) are detached from the carbohydrate auxiliary by acid-catalyzed hydrolysis, and can be converted into the enantiomerically pure pamino acids (17) in a two-step procedure via oxidative degradation of the terminal double bond.
Scheme 13
The corresponding (R)-homoallylamines are correspondingly synthesized from arabinosyl imines 18b or fucosyl imines 18a with high diastereoselectivity (> 251) [30,32], (Scheme 14).
4.2 Syntheses of Amino Acids
111
PivO
SnC14,THF c
R R=CH 19a R=H \9b
R=CH3 18a R=H 18b
Scheme 14
Reactions of glycosyl imines derived from aliphatic aldehydes must be carried out at low temperature due to their higher sensibility towards anomerization. Yields and diastereoselectivity rank in the same region as those achieved for galactosyl homoallylamines. The results of different stereoselective allylations, are summarized in Table 4.1.
Table 4.1 Diastereoselective formation of homoallylamines ~
~
~
GIycosylimine
Nucleophile
Yield (%)
Diastereomeric acid (S:R)
14a 14a 18a 18b
Bu,Sn-ally1 Bu,Si-all yl Bu,Sn-ally1 Bu,Sn-ally1
85 80 19
> 251 > 20:l
15
1:15 1:18
Recently, p-amino acids have been reported attractive for the construction of ppeptides [33] which adopt interesting secondary structures [34]. A number of alternative stereoselective syntheses of p-amino acids have been reviewed recently [35].
4.2.3 Rearrangement Reactions Stereoselective rearrangement reactions can involve sugar-linked functionalities. An example of this type is the Overman rearrangement of allylic trichloracetimidates formed from a D-glucofuranose derivative 20 [36]. This methods affords (L)-a-amino acids 25 from (Z)-allylic imidate 23 and (R)-a-amino acids 25 from (a-imidates 23 with a diastereoselectivity of about 16:1. The oxidative cleavage of compound 24 with RuO, yields the a-amino acid 25, (Scheme 15).
112
Tietgen, Schultz-Kukula and Kunz
H2/Pd/CaCOi
I -
KH, CCgCN
A, Xylene
R'=C&; $=H (D) R'=H; R2=C& (L) 25
24
Scheme 15
Rearrangement reactions which result in ring opening of the carbohydrate ring give access to interesting classes of compounds. Thus, glycosyl homoallylamines can be used for stereoselective chain extension reactions on carbohydrates [ 121. After treatment with boron trifluoride etherate or titanium tetrachloride, galactosyl homoallylamine 14a undergoes cationic aza- Cope-rearrangements with high diastereoselectivity.The reaction was carried out at room temperature, and gave almost quantitative yield of 26 within 10 min (Scheme 16).
pivo OPiv
pivo OPiv
PivOk ! - P h PivO
Qi 14a
BF3-etherate
Mene
c
PivOk
N
*
P
h
PivO $3)
-= 26
Scheme 16
The reaction mechanism was rationalized as an Lewis acid-induced ring opening of the carbohydrate. This iminium cation is subjected to an aza-cope-rearrangement.
4.2 Syntheses of Amino Acids
Piv?
113
pPiv BF,-etherate
PivOk%!*Ph
PivO
C
$-$-..
-
pivo OPiv
PivO
PivO 4
PivO
-e
Scheme 17
The process yields an interesting synthon for the synthesis of higher sugars with complete stereocontrol. Higher sugars play important roles in many biological proacid), a comcesses. Prominent examples are KDO (3-deoxy-D-manno-octulosonic ponent of bacterial liposaccharides [37], and N-acetylneuraminic acid, which is a crucial component of human and animal glycoconjugates [38,39]. In addition, derivatives of N-acetylneuraminic acid show remarkable antiviral properties [40]. This aza-Cope-rearrangement is a common reaction type for glycosyl homoallylamines with high stereoselectivity and proceeds in excellent yields. D-Arabinosyl homoallylamines 19 and D-glucosyl homoallylamines 27 rearrange accordingly in the described way [41], (Scheme 18).
OPiv OPiv OPiv PivO PivO k
c
! PivOA
P
h
2-
28
27
PivO
OPiv OPiv
*
19
Scheme 18
29
114
i’ietgen, Schultz-Kukula and Kunz
Table 4.2 Chain extension of carbohydrates via aza-Cope-rearrangements Glycosylhomoallylamine Lewis acid 14a 14a
27 27 19
BFOEt, TiCl, BF,*OEt, TiCl, BFtOEt,
Yield (%)
Diastereomeric acid (R:S)
Quant. 85 92 Quant 88
> 25:l 20:1 15:l 20:1 1:18
4.2.4 Stereoselective Multicomponent Reactions The newly available biological high-throughput screening (HTS) systems have induced many initiatives in the field of combinatorial chemistry [42]. Besides oligopeptide syntheses [43], multicomponent reactions offer attractive methods for the production of high-diversity libraries. Passerini and Ugi reactions (Scheme 19) are frequently used for synthesis of libraries containing thousands of compounds 1441.
Passerini reaction
Ugi reaction
Scheme 19
The Ugi reaction produces a-amino acid amides from four components (isonitrile, carboxylic acid, aldehyde, and amine) in a one-pot reaction. With glycosylamines and ZnC1, as promoting Lewis acid, a-amino acid amides are obtained [ 13,451 with excellent stereoselectivity in these reactions. For example, the galactosylamine 2 gave Ugi product 30 with formic acid as carboxylic component and various aldehydes and isonitriles in high yields and a diastereoselectivity of 19:l in favor of the D-amino acid amides 30 (Scheme 20).
4.2 Syntheses of Amino Acids pivo OPiv
115
OPiv
HCOOH, R-CHO,ZnCl tBu-NC ,, THF t PivOk
NOPiv
ST$&
pivo
b
OPiv 30
2
R
Scheme 20
Glycosyl imines from aliphatic aldehydes are sensitive to anomerization. However, the anomerization can be avoided by conducting the reactions at lower temperatures (-78 "C). Recrystallization of the crude products (methanoVwater for aliphatic, heptane for aromatic compounds) gave the diastereomerically pure D-amino acid amides (Table 4.3). Table 4.3 Diastereoselective Ugi synthesis of D-amino acid amides with galactosylamine 2
R' n-propyl isopropyl rert-butyl phenyl StYVl
Temperature ("C)ltime D:L-ratio
Yield (%)"I
-7812 days
80 86 80 80
94:6 955 96:4 955 955
-7812 days
-2513 days -2511 days -2511 days
15
Yield is given for pure D-amino acid amides.
The high stereoselectivity can be explained again by means of the zinc complex A (see Scheme 3). The nucleophilic isonitrile attacks the glycosyl imine from the sterically less shielded Re-side. The bulky pivaloyl group at the 2-position and the formed zinc complex block the Si-side efficiently. The exchange of the pivaloyl for the acetyl group decreases the selectivity of the reaction (1O:l instead of 30:l) [13]. L-Amino acids amides 31 can be synthesized easily according to this procedure in high yields and high diastereoselectivity using the pivaloylated D-arabinosylamine 10 as the auxiliary [19].
PivO
PivO OPiv
R-CHO, tBu-NC t
HCOOH, ZnCI,, THF
10
Scheme 21
31
116
Tietgen, Schultz-Kukula and Kunz
The pure diastereomers of compounds 31 are obtained by recrystallization or flash chromatography (Scheme 2 1). The stereoselective synthesis of aliphatic, aromatic, branched-chain, and heteroaromatic amino acid amides has been demonstrated by using this methodology. Table 4.4 illustrates the wide scope of the reaction. 'lhble 4.4 Diastereoselective Ugi synthesis of L-amino acid amides with D-arabinosylamine 10
R'
Temperature ["C]Itime L:D
Yield (%)a)
tert-Butyl Benzyl 4-Chlorphenyl 2-F~ryl 2-Thienyl
-2513 -7811 -2511 -2511 -2511
85 87
a)
days days days days days
973 97:3 98:2 96:4 4:96
91
85 85
Yield of pure L-amino acid amides.
D-Arabinosylamine10is more reactive and shows even higher asymmetric induction than D-galactosylamine 2 in this case [19b]. A variation of this method was reported by Ugi et al., who used 2-acetamidoglucosyl imine derivatives for the synthesis of @)-amino acid derivatives [46]. Linderman and his group applied so-called "convertible" isonitriles [47]for this type of glycosylamine-based Ugi reaction. The 0-silylprotected isonitrile 32 was reacted with tri-0-pivaloylarabinosyl imines or tetra-0-pivaloylgalactosyl imines (Scheme 22). The diastereoselectivity ranked in the same range as that given in Table 4.3.
-
32
33
kNb
34
OPiv
SUg'=
Pi*
pi&piv
NH2
OPiv 2
Scheme 22
10
a)MeOH, sat. HCI 0 % 1 h,rt,3h b) HsO, rt, 12 h
117
4.2 Syntheses of Amino Acids
Ziegler et al. used anomeric glycosyl isonitriles for stereodifferentiation in Passerini and Ugi reactions [48](Scheme 23). Peracetylated and perbenzylated glycosyl isonitriles were chosen in these reactions. Passerini reactions are performed with acetic acid 38 as carboxylic acid component and N-Boc-protected glycinal 37a or phenylalaninal 37b. In the Ugi reactions, the glycosyl isonitriles were reacted with iso-butanal40b, N-Boc-glycine 41, and n-propyl amine (Scheme 24). No significant diastereoselectivity has been observed in these processes, and the results are summarized in Table 4.5.These results illustrate that the stereodifferentiating influence of the carbohydrate depends decisively on its relative position to the reaction center.
Passerini reaction
R2-COOH
R3-NH,
Scheme 23
OAc OAc NC
A -c AcO
H~
N
H
B
~
" O0Y
0 R=H 37a R=CHPPh Wb
36
38
OBn
/
HO' f " ~ ~ o c
QBn
BnoN -C BnO
0
0 39
R=H 4Oa R&H,
Scheme 24
40b
W T N H ,
0 41
42
118
Tietgen, Schultz-Kukula and Kunz
Table 4.5 Ugi and Passerini reactions with glycosyl isonitriles ~
R-NC R-CHO R-COOH
36 36 36 36 36 39 39 39
37a 37b 40a 40b 40b 37a 3713
4Ob
38 38 38 41 42 38 38 41
R-NH,
Solventkime
CH,C12/3 days CH,CI2/3 days CH,C12/l days CH2CI2/37days MeOW8 days CH,C12/6 days CH2C12/8days CH,C1,/25 days
Yield (%)
(Diaste- Product reomeric ratio (R:S)
23 41 80 22 15 31 35 35
55:45 58:42 5050 55:45 63:37 57:43 52:48 6040
Passerini-product Passerini-product Passerini-product Ugi-product Ugi-product Passerini-product Passerini-product Ugi-product
4.3 Stereoselective Syntheses of Chiral Heterocycles Heterocycles are very important in pharmaceutical research [49,50] and the stereocontrolled synthesis of chiral heterocyclic compounds is therefore a major task in modem organic chemistry. Besides catalytic methods, auxiliaries are valuable for asymmetric syntheses of chiral heterocycles. Carbohydrates have been used as auxiliaries in the stereoselective formation of heterocycles, as well as in the stereoselective introduction of functionalities into the heterocyclic framework.
4.3.1 Heterocycles Through Cycloaddition Reactions
+
Glycosyl imines are not very reactive dienophiles in [4 21 cycloaddition reactions. However, they can be subjected to cycloaddition reactions after activation with Lewis acids [511. N-Galactosyl imines 7 were shown to react with isoprene in the presence of zinc(II) chloride to give the corresponding 4-methyl piperidine derivatives 43 (Scheme 25).
PivO
PivO H 7
DV 4-10:l
Scheme 25
.. El
43
4.3 Stereoselective Syntheses of Chiral Heterocycles
119
The diastereoselectivity achieved in these conversations is moderate (4- 10: 1). However, all products 43 can be obtained in diastereomerically pure form either through recrystallization or flash chromatography. The absolute configuration of the products has not yet been confirmed, but it can be assumed that the major diastereomers have (S) configuration according to a controlled approach of the diene to zinc complex A from the less shielded side. Some examples of these Aza-DielsAlder reactions. are shown in Table 4.6.
Table 4.6 Diastereoselective Aza-Diels- Alder reactions with N-galactosyl imines and isoprene R
Temperature T ("C)
Yield (%)
Diastereome- Isolated pure diastereomer ric ratio (%)
p-ClC6Hd p-FC,H, 2-F~ryl 2-Thienyl
$4 +4
95 90 98 95
87:13 91:9
12h
12h 4 days 4 days
+ 20
+ 20
80:20 84:16
60 % 52 % 65 % 56 %
The reactions can also be promoted by SnCl,, the diastereomers with the opposite enantiomeric configuration being obtained by using imines 18 derived from D-arabinosylamine 10 [32] (see Scheme 26).
PivO
PivO
18
H'
Scheme 26
The isolation of an intermediate revealed that the reaction proceeds via a tandem Mannich- Michael addition pathway. The zinc (11) chloride-promoted cascade reaction starts with a Mannich reaction. For a number of reactions, the Mannich-type intermediate can be isolated if the reaction is stopped by addition of diluted ammonium chloride solution [52,53].
120
fietgen, Schultz-Kukula and Kunz O-SiMe3
a) aq. HCI
Me0
L
PivO
PiVO
H
7
46
OPiv
aq. HCI
PivO 45
Scheme 27
The Mannich reaction is followed by an intramolecular Michael addition and a subsequent condensation reaction. The so-formed 2-substituted didehydropiperidines 46 are obtained in high yields and excellent diastereoselectivity (Scheme 27). The reaction can be carried out with glycosyl imines derived from a broad range of aliphatic, aromatic, and heteroaromatic aldehydes. Piperidinones of opposite enantiomeric configuration are available by applying the corresponding D-arabinosyl imines 18 [32]. The major diastereomers are isolated by flash chromatography or recrystallization in high yields. The 2-propyl dehydropiperidine 46a can be readily converted into enantiomerically pure (R)-coniine hydrochloride 47 (Scheme 28).
Pivo
a) L-Selectride
YPiv
b)
PivO
Piv46a
-
"'WSH IBF,
c) HP, Raney-Ni d) HCVMeOH
/ \
H H
(R)-coniine hydrochloride 47
Scheme 28
The confusion about the configuration of natural coniine in the literature [54] was clarified by a X-ray analysis of crystals of 46a, which proved the R-configuration of the synthesized compound, and also of the naturally occuring coniine [53]. The formation of (S)-anabasine hydrochloride 48 [5 1,521 (Scheme 29) confirms a backside attack of the diene system at the zinc complex A during the initial Mannich reaction of the 3-pyridyl aldimine 7b (see Scheme 3)
121
4.3 Stereoselective Syntheses of Chiral Heterocycles ,0-SiMe3 P
i
v
k
a) Me0
~
P
ZnCI,, THF, -20 "C PivO
\ N
N\
PivO
*
i
v
PivO
46a
H H
~
PivO
b ) aq HCI 7b
kN
IS\
yh'
C) H2, Raney-Ni d) HCVMeOH
"'
(9-anabasine hydrochloride 48
Scheme 29
The chiral piperidinones 46 formed by the reaction between Danishefsky's diene and the glycosyl imines are valuable synthons for the synthesis of higher substituted piperidine derivatives. 2,6-Disubstituted piperidinones 49 are obtained by addition of organocuprates complexes with boron trifluoride [53]. The reaction pathway is illustrated in Scheme 30. pivo OPiv
R2MgCI, Cul, BF3'Et20 PivO
*
THF, -78°C
kNVo PivO R' 46
49
Scheme 30
The cis 2,6 disubstituted piperidinones 49 are formed preferentially in this Michael-type addition reaction (Table 4.7). Table 4.7 Synthesis of 2,6-disubstituted piperidinones 49 ~~
R
R'
Yield (%)
Diastereorneric ratio &:trans
i-propyl 3-fury1 4-cyanophenyl 5-hexenyl 3-fu~l
allyl i-propyl allyl n-propyl i-amyl
66 61 16 81 61
3: 1 > 12:l > 8:l > 12:l > 8.1
o
122
Tietgen, Schultz-Kukula and Kunz
The reaction can be alternatively carried out with TMSCl as a Lewis acid and organocuprates [53].(-)-Dihydro-pinidine, the enantiomer of an alkaloid from Pinus jeflei, has been synthesized in excellent overall yield following this method. Piperidinone 46a was treated with Gilman's cuprate and trimethylsilylchloride in THF at -78 "C,such that the 2'6-disubstituted piperidinone 49a was obtained in high yield and diastereoselectivity. Its carbonyl group was reduced in a two-step procedure via formation of the dithiolane and subsequent desulfurization with Raney nickel. The (-)-dihydro-pinidine hydrochloride 51 was released quantitatively from the carbohydrate auxiliary by treatment with 0.1 N HC1 and methanol. The auxiliary can be recovered during the work-up procedure (see Scheme 31).
~~o
Pi"&
pivO
a) THF. Me2CuLi. -78 TMSCl "C b) TBAF, THF
Pivo
pi*
pvo
DV z 1O:l 4911
46a
b) **SH
c) H2, Raney-Ni 1
PivO
PivO 15
OH OH
tHi/N\ N \ HH
Q
-
%I (-)-dihydm-pinidinehydrochloride 51
0.1 M HCVMeOH ( 1 5 ) PivO 50
Scheme 31
The chiral piperidinone derivative 46a also opens up an efficient way to synthesize indolizidine alkaloids [53],e.g., gephyrotoxin 167B 54 [55], a minor alkaloid from glandular secretions of Dendrobutes pumilio, a South American frog of the tropical forest [56]. The 3-(1-ethoxy-ethoxy)-propylgroup was introduced into 46a via a 1,4 addition, with moderate diastereoselectivity. The decreased diastereoselectivity in this reaction has been rationalized by an interfering coordination effect exhibited by the functionalized side-chain of the organocuprate. The formed 2,6-disubstituted piperidinones (cidtruns, 3: 1) were cleaved from the carbohydrate auxiliary by acidic hydrolysis, the ethoxyethyl group being removed under these conditions. The free piperidinone 52 was converted into the corresponding chloride by an Appel reaction [57]. This then cyclized to give the pure cis indozilidinone 53 [53].The trans isomer
mF3
123
4.3 Stereoselective Syntheses of Chiral Heterocycles
obviously does not cyclize under these reaction conditions. The cis indozilidinone 53 was reduced in the two-step procedure via desulfurization of the dithiolane with Raney nickel (Scheme 32). Gephyrotoxin 167B 54 was obtained without further purification in the enantiomerically pure form.
3:l
Me3SiCI,THF, -78 "C c
PivO
HO
b) 0.1 N HCI, MeOH
H 52
1
I a)
HSMSH /eF3 CH2Cb
c) H,, Raney-Ni, i-PmH, 70 "C gephymtoxin 1678 54
PPh3 CCI, Et3N,'MeCN
cy-
pure cis
53
Scheme 32
Decahydroquinolines are another important class of alkaloids isolated from the skin of tropical frogs. Frogs of the family Dendrobates pumilio produce highly toxic alkaloids, the pumiliotoxins [%I. hmiliotoxin C, one of the prominent members of this class of compounds, has a cis-annulated decahydroquinoline structure, whereas toxins of the related family of Dendrobates histrionicus have trans-annulated decahydroquinoline structures [49]. These decahydroquinoline systems can be synthesized from the galactosylamine auxiliary 2 in a 12-step pathway(see Scheme 33)
WI.
124
Tietgen, Schultz-Kukula and Kunz
/
-a) 0
N & 3iP
Pentane, MS 4A OSiMe3 ~~
PivO
&-t
2
/
Pivo
b' Me ZnCI2'0Et2, THF, -20 C '
46b DV > 4O:l
I PivO P i
v
o
h
b a) Na104, K20s04cat. aq. Dioxan b) NaOH, dibenzo-l8cr.-6 benzene
55
v
h
k
,
PivO 491,
a) Me2Culi, MgSiCl THF. -78 "C b) TBAF
DV > 1O:l
a) HCI aq. MeOH b) Z-CI, NaHC03
\
c) HS-SH PivO
PivO P i
4
PivO
1
n-PrMgCI, Cul ~ ~ ~ 9THF. 0 ~ -704o c.
PivO
DV > 15:l:O:O
56
U
BF3*OEt, d) H2, Raney-Ni 9) HCI
I' -\
H H 4a-epi-pumiliotoxinC hydrochloride 57
Scheme 33
Galactosylamine 2 gave the corresponding galactosyl imine 7 with 5-hexenal. The galactosyl imine reacted with Danishefsky's diene to give the piperidinone system 46b with excellent diastereoselectivity. The 2,6-disubstituted piperidinone 49b was obtained by Michael addition of the cuprate in high yield and diastereoselectivity. The terminal double bond was converted into the aldehyde by oxidative cleavage. A base-induced intramolecular aldol condensation furnished the pumiliotoxin skeleton 55. The conjugate addition of Gilman's cuprate in the presence of trimethylsilyl chloride resulted in the formation silyl enolether of the 1,Cmethyl adduct. Treatment of the silyl enolether with aqueous tetrabutylammonium fluoride surprisingly gave the trans-annulated decahydroquinoline system 56. Comins and Dehghani [60] have reported the protonation of this type of silyl enolethers carrying a phenoxycarbonyl group as the amino-protecting group by an analogous fluoride-induced cleavage. However, these protonations proceeded with preferred formation of cis-annulated decahydroquinolinones. It is interesting to note, that the carbohydrate moiety is obviously able to steer the protonation of the intermediate enolate stereoselectively to the thermodynamically disfavored direction. This first example of a carbohydrate-
4.3 Stereoselective Syntheses of Chiral Heterocycles
125
induced selective protonation was confirmed by X-ray analysis of the rrans decahydroquinoline derivative 56 [59]. The decahydroquinoline has been released from the carbohydrate auxiliary by acid-catalyzed hydrolysis. After introduction of the N-benzyloxycarbonyl (Z) group, the above-mentioned two-step reduction of the carbonyl group and the subsequent hydrogenolytic removal of the Z-group furnished enantiomerically pure 4aepi pumiliotoxin C hydrochloride 57.
4.3.2 Stereoselective Syntheses of Chiral Piperidines via Addition Reactions to 4-Pyridones An alternative stereoselective synthesis of chiral heterocycles based on carbohydrate-induced stereodifferentiation includes nucleophilic addition reactions on heterocyclic systems already bound to the carbohydrate auxiliary. An example of this strategy has been shown by stereoselective addition of Grignard reagents to carbohydrate-linked 4-pyridones [61]. For this purpose, trimethylsiloxypyridine was glycosylated regioselectively using pivaloyl-protected glycosyl fluorides.
QSiMe3 PivO
PivO
%
PivO
PivO
PivO Lewis Acid I DCE, 70°C
F
59
58
R=CH,OPiv R=H PivO PivO
Scheme 34
I
a) i-Pr,SiOTf 2,6 Lutidin. CH,CI, b) R' MgX, THF or OEt,
PivO
126
Tietgen, Schultz-Kukula and Kunz
The reaction, which was reminiscent of the Vorbriiggen methodology [62], must be catalyzed by titanium tetrachloride and gave the N-glycosylpyridones 59 in high yields and with excellent regioselectivity. These N-glycosyl pyridones 59 can be activated via 0-silylation using triisopropylsilyltrifluoro-methanesulfonatein the presence of 2,6-lutidine. The so-formed 4-siloxypyridinium salts have been treated with a variety of Grignard reagents to form the corresponding 1,4 addition products 60 with excellent regio- and stereodifferentiation. The results of this synthesis are summarized in Scheme 35 and Table 4.8. Table 4.8 Stereoselective addition of Grignard reagents at N-glycosylpyridones ~~
R
R'
Reaction time (h)
CH,OPiv CH,OPiv CH,OPiv H
Me
2.5 1 2
H H H
n-Pr Ph n-Pr Ph
n-Bu Me
Yield (%)
9.55 90:lO 0:loo 88:12 0: 100 88: 12 1oo:o
14
1
84 83 100
1 1 4
96 91 31
Diastereomeric ratio (S:R)
This methodology opens up an efficient stereoselective access to chiral piperidinone derivatives 60 which have opposite configuration compared to compounds 46 obtained by the tandem Mannich -Michael reaction sequence described in Section 4.3.2. The high diasteroselectivity and regioselectivity in these reactions once again illustrate the stereodifferentiatingpotential of carbohydrates in the synthesis of chiral heterocyclic systems.
P
i
v
O
k ~~o
a) 2,6-lutidine, i-Pr3SiOTf CH& h
PivO
P i d h N v 0 PivO PivO
b) RMgX, THF or OEt2
PivO
X=
59
60
R
,O--SiMe3
A
a) Me0
ZnC12, THF, -20 "C
p i v o & H U c b) & aq HCI y R PivO 7
Scheme 35
..
P
*
i
v
o
kN
~
PivO PivO
46
R "
n
References
127
4.4 Conclusions Carbohydrate-derived auxiliaries exhibit an efficient stereoselective potential in a number of nucleophilic addition reactions on prochiral imines. a-Amino acids, pamino acids and their derivatives can be synthesized in few synthetic steps, and with high enantiomeric purity. A variety of chiral heterocycles can readily be obtained from glycosyl imines by stereoselective transformations, providing evidence that carbohydrates have now been established as useful auxiliaries in stereoselective syntheses of various interesting classes of chiral compounds.
References [ I ] H. Kunz, K. Ruck, Angew. Chem. Int. Ed. Engl., 32, 1993, 336. [2] a) P. G. Hultin, M. A. Earl, M. Sudarshan, Tetrahedron, 53,1997, 14823; b) H. Kunz, M. Weymann, M. Follmann, K. Oertel, M. Schultz-Kukula, A. Hofmeister, Polish J. Cbem., 73, 1999, 15; c) H. Kunz, Pure Appl. Cbem., 67, 1995, 1627. [3] a) S. Hanessian in Total Syntheses of Natural Products, The Chiron Approch, Pergamon Press: Oxford UK. 1983; b) G. Bringmann, R. Gotz, S. Marmsen, J. Holenz, R. Walter, Liebigs Ann., 1996, 2045; c) S. Laschat, Liebigs AndRecueil 1. 1997; d) D. Tramer, S. Porth, T. Opatz, J. W. Bats, G. Giester, J. Mulzer, Synthesis, 1998, 653. [4] H. C. Brown, U. S. Racherla, J. Org. Cbem., 56, 1991, 401. I51 R. Noyon, T.Ohkuma, M. Kitamura, H. Takaya, N. Sayo, H. Kurnobayashi, S. Akutagawa, J. Am. Chem. Suc., 109, 1987, 5856. [6] a) T. P. Loh, U. L. Chua, J. J. Vittal, M. G., Wong Chem. Cornmun., 1998,8,861;b) S. Pinheiro, S. F. Pedraza, M. A. Peralta, J. Carbohydr: Cbem., 17, 1998, 6, 901. [7] a) K. Yonohare, T. Hashizume, K. Ohe, S. Hernura, Bull. Chem. Soc. Jpn., 71, 1998, 8 , 1967.;b) L. Shamia, Indian J. Cbem. Sect. B. Org. Chem. bid. Med. Cbem., 36,1997,796;c) H. C. Brown, W. S. Park, B. T. Cho, P. V. Ramachandran, J. Org. Chem., 52, 1987, 5402. [8] a) D. Felix, I. Szymoniah, C. Moise, Tetrahedron, 53, 1997, 16097; b) J. Chika, H. Takei, Tetra bedron Lett., 39, 1998, 605; c) B. T. Cho, Y. S. Chun, Tetrahedron Asymm., 9, 1998, 1489. [9] a) P. Areces, M. V. Gil, F. J. Higes, E. Roman, J. A. Serrano, Tetrahedron Lett., 39, 1998, 8557; b) P. Bako, K. Vizvardi, Z. Bajor, L. Toke, Cbem. Cornmun., 1998, 1193. [ 101 a) M. L. G. Ferreira, S. Pinheiro, C. C. Perrone, P. R. R. Costa, V. F. Ferreira, Tetrahedron Asynim., 9, 1998,267 1 ;b) S. Jarosz, J. Chem. Soc. Perkin Trans. I , 1997,2579.;c ) M. R. Banks, J. 1. G. Cadogan, I. Gosney, S. Gaur, P. K. G. Hodgson, Tetrahedron Asymm., 5 , 1994, 2447, 2458. [ 1 I ] a) L. F. Tietze, G. Kettschau, Hetero Diels-Alder reactions in Organic Chemistry, Top. Curr: Chem., 189, 1997,l; b) A. Defoin, H. Sarazin, J. Streith, Tetrahedron, 53, 1997, 40, 13769. 1121 S. Deloisy, H. Kunz, Tetrahedron Lett., 39, 1998, 791. 1131 H. Kunz, W. Pfrengle, Tetrahedron, 44, 1988, 5487. [ 141 a) R. U. Lernieux, A. A. Pavia, J. C. Martin, K. A. Watanabe, Can. J. Chem., 47,1969,4427;b) R. U. Lemieux, J. P. Praly, Can. J. Chem., 65, 1987, 213. 151 M. J. Collins, R. J. Femer Monosaccharides, John Wiley & Suns. New York, 1995. [16] a) H. Kunz, J. Mohr, J. Chem. Soc., Cbem. Cornmun., 1988, 1315; b) H. Kunz, R. Kullmann, Terrahedmn Lett., 33, 1992, 6115. [I71 H. Kunz, W. Sager, Angew. Cbem. Int. Ed. Engl., 26, 1987, 557. [I81 D. Enders Asymmetric Syntheses, Vol. 3, Ed.: Morrison J.D., Academic Press, Orlando, 1984,275. 1191 a) H. Kunz, W. Pfrengle, W. Sager, Tetrahedron Lett., 30, 1989,4109; b) H. Kunz, W. Pfrengle, K. Ruck, W. Sager, Synthesis, 1991, 1039. 1201 H. Kunz, W. Stahle, Synletr, 1991, 260.
128
Tietgen, Schultz-Kukula and Kunz
[21] V. Schollkopf in Enantioselective Syntheses of Nonproteinogenic Amino Acids, Top. Curr Chem., 109, 1983, 65. [22] R. M. Williams in Syntheses of Optically Active a-Amino Acids, Pergamon, Elmsford, New York, 1989,208. [23] H. Kunz, W. Sager, D. Schanzenbach, Liebigs Ann. Chem., 1991, 649. [24] H. Kunz, W. Sager, W. Pfrengle, D. Schanzenbach, Tetrahedron Lett.,29, 1988, 4397. 1251 I. Ugi, K. Offermann, H. Herlinger, D. Marquading, Liebigs Ann. Chem., 1, 1967, 1. [26] H. Kunz, D. Schanzenbach, Angew. Chem. Int. Ed. Engl., 28, 1989, 1068. [27] Y.Furukawa, M. Okabe, T. Yoshioka, T. Ishiura, Spec. Publ. R. SOC.Chem., 52, 1984, 163. [28] H. Kunz, A. Burgard, D. Schanzenbach, Angew. Chem. Int. Ed. Engl., 36, 1997, 386. [29] S. Laschat, H. Kunz, Synlen, 1990, 51. [30] S. Laschat, H. Kunz, Synlett, 1990, 629. [31] S. Laschat, H. Kunz, J. Org. Chem., 56, 1991, 5883. d 1321 D. Hebrault, H. Kunz, u ~ p u ~ l i s h eresults. [33] D. Seehach, M. Overhand, F. N. M. Kuehnle, B. Martinoni, Helv. Chem. Acta, 79, 1996, 931. 1341 D. Seebach, J. Podlech, Angew. Chem. Int. Ed. Engl., 34, 1995, 471. [35] E. Juaristi (Ed.), Enantioselective Synthesis of P-Amino Acids, Wiley-VCH, New York, Chichester, Weinheim, Brishane, Singapore, Toronto, 1997. [36] K. Kahinuma, T. Koudate, H. Y. Li, T. Eguchi, Tetrahedron Lett., 32, 1991, 5801. [37] F. M. Unger, Adv. Curbohyds Chem. Biochem., 38, 1981, 323. 1381 A. Rosenberg in Biology of Sialic Acids, Plenum, New York, 1995. [39] M. Mammen, S. K. Choi, G. Whitesides, Angew. Chem. Int. Ed. Engl., 37, 1998, 2754. [40] M. von Itzstein, W. Y. Wu, G. B. Kok, M. S. Pegg, J. C. Dyason, B. Jin, T. Van Phan, M. L. Smythe, H. F. White, S. W. Oliver, P. M. Colman, J. N. Varghese, D. M. Ryan, J. M. Woods, R. C. Bethell, V. J. Hotham, J. M. Cameron, C. R. Penn, Nature, 363, 1993,418. [41] H. Kunz, H. Tietgen, unpublished results. [42] F. Balkenhohl, C. von dem Bussche-Hiinnefeld, A. Lansky, C. Zechel, Angew. Chem. Int. Ed. Engl, 35, 1996, 2288. [43] F. J. Friichtel, G. Jung, Angew. Chem. Int. Ed. Engl., 35, 1996, 17. [44] I. Ugi, H. Bock, J. Prakt. Chem., 1997, 499. [45] H. Kunz, W. Pfrengle J. Am. Chem. Soc., 110, 1988, 651. [46] I. Ugi, S. Lehnhoff, M. Gobel, R. M. Karl, R. Klosel, Angew. Chem. Int. Engl. Ed., 34,1995, 1104. [47] R. J. Lindermann, S. Binet, S. R. Petrich, J. Org. Chem., 64, 1999, 336. [48] T. Ziegler, R. Schlomer. C. Koch, Tetrahedron Lett., 39, 1998, 5957. [49] J. W. Daly, H. M. Garrato, T. F. Spande in Alkaloids (Ed. Cordell G.A.) Academic Press, San Diego, 1993, Vol. 43. 185. [SO] a) S. W. PeIletier (Ed) in Alkaloids: Chemicals and Biological Perspectives, J.Wiley, New York, 1985; b) Silvermann R.B. in The Organic Chemistry of Drug Design and Drug Action, Academic Press, San Diego, 1992. [51] W. Pfrengle, H. Kunz, J. Org. Chem., 54, 1989, 4261. [52] H. Kunz, W. Pfrengle, Angew. Chem. Int. Ed. Engl., 28, 1989, 1067. [53] M. Weymann, W. Pfrengle, D. Schollmeyer, H. Kunz,Synthesis, 1997, 1151. [54] H. W. Tallent, E. C. Horning, J. Am. Chem. SOC., 78, 1956, 4467; Beilstein E IMV, Vol. 20, 1611. [55] R. P. Polniaszek, S. E. Belmont, J. Org. Chem., 55, 1990, 4688. 1561 T. Tokujama, T. Tsujita, A. Shimade, H. M. Garrafo, T. F. Spande, J. W. Daly, Tetrahedron,47,1991, 5401, and literature cited therein. [57] R. Appel, Angew. Chem. Int. Ed. Engl., 14, 1975, 801. [58] a) J. W. Daly, T. Tokuyama, G. Habermehl, I. L. Karle, B. Witkop, Liebigs Ann. Chem., 729,1969, 198; h) T. Tokuyama. N. Nishimori, I. L. Karle, M. W. Edwards, J. W. Daly, Tetrahedron, 43, 1987, 643., c) for biological activity of pumiliotoxin: C: J. W. Daly, Y. Nishizawa, W. L. Padgett, T. Tokuyama, P. J. McCloskey, L. Waycole, G. A. Schultz, R. S. Aronstam, Neurochem. Res., 16,1991, 1207. [59] M. Weymann, M. Schultz-Kukula, H. Kunz, Tetrahedron Letters, 39, 1998, 7835. [60] D. L. Comins, A. Dehghani, J. Chem. SOC. Chem Commun.,1993, 1838. [61] M. Follmann, H. Kunz, Synlett, 1998, 989. [62] H. Vorbriiggen, K. Krolikiewicz, B. Bennua, Chem. Bes, 114, 1981, 1234.
Modern Amination Mefhods Edited by Alfredo Ricci copyright 0 WILEY-VCH Verlag GmbH, 2wO
5 Syntheses of Transition Metal Nitride Complexes Craig S. Tomooka, Hitoshi Iikura, and Erick M. Carreira
5.1 Introduction A large collection of data and extensive studies of transition metal complexes possessing metal -nitrogen multiple bonds has been documented [ 13. Not only does this class of inorganic coordination complexes display an array of interesting bonding and structural features, but it also has important applications. In particular, transition-metal complexes with terminal nitrido ligand have recently become of great interest for a number of important reasons: (i) they are considered as intermediates in the fixation of nitrogen [2];(ii) they have been shown to participate in nitrogenatom transfer reactions to both inorganic [3]and organic [4] acceptors; (iii) they have found applications in new materials because of their thermal and chemical stability; (iv) they have medical applications as imaging agents [5]; and (v) nitrido ligands can serve as a versatile bridging ligand between metal centers. It is the aim of this chapter to provide an overview of the various transition metal nitrides that have been reported. The term “nitride” is used to designate complexes possessing an N-atom ligand which is bonded only to the transition metal and in which the ratio of metal to nitride is 1:l. For example, the complexes (TPP)Mn(N) 1 (TPP = 1,5,15,20-tetraphenylporphynatodianion) or (i-Pr,N),Cr(p-N),Cr(Ni-Pr,), 2 fall within this definition (Figure 5.1); however, because of space limitations the chapter does not include complexes such as Cl,V(NCl) or (TPP)Fe(pN)Fe(TPP). The reader is referred to a number of excellent comprehensive reviews which have previously appeared [ 11. This chapter will attempt to review the general methodologies available for the synthesis of metal nitride complexes. Additionally, discussion is presented of the structurally diverse ligands that have been incorporated in metal-nitride complexes.
130
Tomooka, Zikura, and Carreira N Mn(TPP)
1 terminal
i-PrZN. N ,.
c'\. Cr, i-Pr2N N
,Ni-Pr2
.
N+Pr2
2 M2W-Nz)
Figure 5.1. Typical structures of transition-metal nitrides discussed in this review.
Three distinct approaches can be envisioned for the preparation of metal nitrides incorporating varied organic ligands (Figure 5.2). In the fxst approach, the nitride is generated by the reaction of the metal complex with a reagent molecule serving as a nitrogen-atom source. In the second, the desired transition metal -nitride complex is prepared from a starting coordination complex which already incorporates a metal nitrogen bond, requiring only an oxidation state adjustment. The third approach the synthesis commences with a simple X,M fN complex and new ligands are introduced without modification of the formal oxidation state at the metal.
Nitride-introducing reaction Metal modification reaction Ligand modification reaction
Figure 5.2. Three approaches to the synthesis of metal nitrides.
5.2 Nitrogen-Atom Sources for the Preparation of Metal Nitrides There are well over 30 different reagents that have been reported as N-atom sources for the preparation of nitrido metal complexes. The evaluation of the relative importance of these reagents currently is difficult because no single method has emerged as general and, as a result, the existing reagents and methods are complementary to each other. A useful means of categorizing these N-atom transfer reagents is on the basis of the number of electrons they contribute in the reaction with the metal center to form the nitride complex. An N3--equivalent reagent contributes six valence-electrons to the metal center; thus with these reagents, no electrons are formally supplied or demanded from a metal center to form the corresponding
5.2 Nitrogen-Atom Sources for the Preparation of Metal Nitrides
131
metal nitride. An N2--equivalent reagent can be considered a five valence-electron donor; thus, in forming a metal nitride the metal center supplies one-electron. An N' --equivalent reagent includes four valence-electrons, and equivalent includes three valence-electrons. Below, we discuss specific examples of the various reagents that have been used preparatively.
5.2.1 N3- Reagents These reagents formally utilize an N3- anion-equivalent with concomitant formation of cationic co-products. It is important to note that in these reactions, the formal oxidation state of the metal center does not undergo any net change during the course of the reaction. Examples of these reagents and the reactions that have been described with various metal complexes are summarized in Table 5.1. Ammonia as well as bis(trimethylsily1)-, tris(trimethylsily1)-, and tris(trimethylstanny1)amines have been utilized with a variety of transition metals. The reagent [Hg2N]Br (Table 5.1, Entry 2)-known as Millon's base-has proven quite versatile in the ready synthesis of tungsten nitrides. Lithium t-butyl amide (Entry 6) has been employed in the preparation of manganese nitrides, leading to the formation of isobutylene as co-product. The N,N',N'-tris(trimethylsily1)derivative of benzamidine likely functions in an analogous manner to (Me,Si),N with the added advantage that it is considerably less volatile.
Table 5.1 N3- reagents in the synthesis of metal nitrides Entry Reagent 1 2 3
4 5 6 7 8
NH, [HgzNlBr N(SnMe,), HN(SiMe,), N(SiMe,), Li(NHt-Bu) PhC(NSiMe,)(N(SiMe,),) t-BuNCO
Metal Osvlll
Rev"
WV' Tav Crv', MoV' W"' MnV" Wv' Osv", RuV*
Nitride
Co-products
Os-N,Re-N W=N Ta = N Cr = N, Mo = N W=N Mn=N W r N 0 s = N, Ru = N
H+ 2Hg+, Br+ Me3Sn+ Me&+ Me$+ Li+, 2H+, Me& = CH, Me&+, PhCN CO,, H+, Me& = CH,
The preparation of metal nitrides with N3- reagents typically employs do metal complexes as starting materials. However, the reactions of t-butyl isocyanate with metal-oxo complexes of 0s'' and Ru"' represent rare examples of the use N3- reagents with d'-metals. It has been postulated that reaction of the isocyanate with metal-oxo 3 affords a four-membered ring intermediate 4, followed by the extrusion of carbon dioxide to yield t-butyl metal imide 5 (Scheme 1). Elimination of isobutylene from this complex then produces the metal nitride and the isobutylene.
132
Tomooka, Iikura, and Carreira
4
3
5
7
6
Scheme 1
5.2.2 N2- Reagents Urea is the sole N2- reagent reported for the synthesis of a metal nitride. The generation of metal nitride from urea requires a one-electron oxidation at the metal center, and for the cases reported in can be speculated that these involve a bimetallic intermediate (Scheme 2).
8
9
10
11
Scheme 2
5.2.3 N'- Reagents The use of these reagents for the preparation of metal nitrides formally requires that the metal reagent supply two electrons to the N-atom donor. A listing of these reagents is provided in Table 5.2. Table 5.2. "--reagents Entry
for nitride synthesis
Reagent
Metal nitride formed Product Cr", MnV, Mow, Mo", Osvl, ReV, Re"', ReV1', Vv, WIV, WV'
2 3 4
NH,/NaOCI; NH&; NH,/PhIO; NHJNBS NSCl
Cr = N, Mn = N, Mo = N, Mo = N, 0 s = N, Re 5 N, Re = N, Re = N, V=N, WEN, WEN
Co-product N2
Crv, MnV
H+
MoVI, R e v Crv'
SCI+ Phenanthrene
5.2 Nitrogen-Atom Sources for the Preparation of Metal Nitrides
133
Of these reagents, N3- is one of the most widely-used with do, d', and d2 metals, including Group V (V), Group VI (Cr, Mo, W), Group VII (Mn, Tc, Re), Group VIII (0s). Coordination of N3- generates an intermediate metal azide that thermally or photochemically decomposes to afford N, and the corresponding metal nitride. The sodium amide derived from 2,3,5,6-dibenzo-7-aza bicyclo[2,2,1]hapta-2,5-diene (Table 5.2, Entry 4) works in a way similar analogous to N3-, and was reported for the synthesis of a Cr,, nitride. The use of this reagent has distinct advantages over the use of N3- salts which can be explosion hazards and display poor solubility in organic solvents. The combination of ammonia with oxidizing reagents (NaOC1, Cl,, PhIO, NBS, tBuOC1) leads to formation of electrophilic nitrogen that participates in nitride formation. This procedure has been used as a general, powerful method for the preparation of CrVand MnV nitrides. It has been reported that the use of ammonia in combination with NBS or sodium hypochlorite constitutes mild reaction conditions that allow the synthesis of a wide range of manganese nitrides, considerably expanding the class of ligands that can be employed with manganese. Another mild method for the preparation of metal nitrides involves transfer of a preformed metal nitride from one metal center to a second. A number of CrVand MnVnitrides have been synthesized with this method.
5.2.4 No Reagents These reagents are formally at an oxidation-state level equivalent to elemental nitrogen. The reacting metal partner in these reactions is formally required to undergo a three-electron oxidation. As shown in Table 5.3, NO, N, and RCN have all been utilized as nitrogen sources for nitride synthesis. These processes have attracted much attention since they involve activation and atom transfer methodologies commencing with small, normally inert molecules. The release of strain energy associated with the starting diaziridine as the thermodynamic driving force that leads to efficient nitride formation.
Table 5.3. No reagents for nitride syntheses. Entry
Reagent
Metal
1 2 3 4
NO N2 RCN MnV = N
Cr"', Ru"' MoV' WV'
Mn"
134
Tomooka, likura, and Carreira
5.2.5 Other Reagents Additional nitrogen sources have been reported in the synthesis of metal nitrides. These include trichloramine, hydrazine, and N,N-diphenylhydrazine (Table 5.4). Based on the details provided it is not clear how these may be categorized within the organizational classification discussed above
Table 5.4. Other nitrogen transfer reagents. Entry
Reagent
Metal
1 2 3
NCI, WNHZ Ph,NNH,
MeV*, ReV" ReV, Tc" Tcw
5.3 Ligands in Metal Nitride Complexes The ligands that have been used in the preparation of metal nitride complexes are quite varied. They include halides, carbogenic groups (alkyl moiety and Cp*), pnictogens (amine, amide, imide, phosphine, and arsine), and chalcogens (ether, alkoxide, 0x0, thioalkoxide, and selenides). Chart 1 provides a listing of the various ligands and the associated nitrido metal complexes.
0
L
3
c,
N donor
CN-
Carbanionic
Halides
OS(VI) Ru(VI)
CH3-
F-
dbabh
CI-
Mn(VII)
he Mes
Mo(VI)
Mo(lV), Mn(V), Mo(VI), W(W. W(IV). Re(V)
Br-
Cr(Vl)
Tc(V), Re(V), Re(VI)
I-
Cr(V1)
Cr(Vl)
136
Tornooka, likura, and Carreira
z?
xz 0
Chart l b
$
137
5.3 Ligands in Metal Nitride Complexes
f
6 *0 f
z 5
\ / O
\'
1 b /
Q
c*:]
0
0
WZ
f zs
rQ
0
fI
f
zd
2
i
i:
a I
1 b 5
E
qY
iQ. &f a
a
\'
L i
1
I
b
/
r
a
#
G \ &
z-
'z
5'
r n \ i / / r n
m
Chart l c
iij
E U
z i
a
x 1
t5
E
'15
@
z
c
co b
138
Tonzooka, Iikura, and Carmira
0 I
t f
0
2 %f
3
lo0 <
fI
c I
s
a' I
0 I
Chart Id
5.3 Ligands in Metal Nitride Complexes
g U
2 a
Chart l e
139
140
Tomooka, Iikura, and Carreira
5.4 Transition Metal Nitride Complexes In this section a collection of the various metal nitrides that have been reported are arranged by metal. The abbreviations employed for the various ligands can be found in Chart 1.
5.4.1 Vanadium The large majority of reportec. vanadium nitrides have a Vv center with halide, amine, and C* ligands. Only one example of a VN complex has been isolated, and it is part of a mix-valent VV(p-N),VV' unit. A variety of different methods have been employed, with the use of azide being most common. Reaction of V' complexes of 1,4,7-triazacyclononane (13) or 1,2,3,4,5-pentamethyIcyclopentadiene (Cp*) with an equivalent of Me3SiN, followed by heating or UV-irradiation provided the corresponding nitride as shown in Eqs (1-2) [6]. Whereas the complex incorporating triazacyclononane ligand 12 affords 14 bearing a terminal nitride as ligand, the complex bearing a Cp* ligand was isolated as a rare dinuclear complex 17 with two bridging p-N ligands. In this complex, all four VV-N bonds are equivalent with bond lengths of 1.77 A, longer than the typical terminal Vv-nitride (1.57 A).
[LV(acac)(N3)]CIOd
hv
N [LV(acac)]CI04
(1)
14
12
L = 1,4,7-triaza-cycIononane (13)
[cpvc12l3 15
-
Me3SiN3 (16) benzene reflux
N [Cp'VCl]p 17
Reaction of VCI, with Me3SiN, affords the corresponding N-silylated Vv nitride 19 (Eq. (3)) which following treatment with Ph,PCl provides the corresponding salt [7,8] Nitride 20 has been prepared through a different route by treatment of (Me3SiO),VN with Cl,V=O (Eq. (4)). When 19 was exposed to aromatic amines such as 4-tert-butylpyridine and quinoline, the corresponding adducts 21 and 22 were isolated (Eq. (5)).
5.4 Transition Metal Nitride Complexes
Me3SiN3
VCI,, 18
SiMe3 NI Ph4PCI
SiMe31+ N I 111
~ p
141
vc13
vc14
19
20
(3)
4-terBu-py
CI3VNSiMe3
23 TMEDA
VC12(quinoline)2 24
Equations 3-5
When the V'" alkyl diamide complex 25 is treated at 60 atm of H, followed by N,, the cationic dinuclear Vv'-Vv nitride 26 was isolated (Eq. (6)) [9, 101. Although there is evidence for N, functioning as a nitride source has been described in the literature, the mechanistic details of this particular reaction has not been established. Complex 24 constitutes a rare example of a V" nitride; it is interesting to note that all of V-N bonds are of approximately the same length, namely 1.77 A.
142
Tomooka, Iikura, and Carreira Me. ME Me3Si-N,
= I - -
,si.' /"\
(Me3Si)2N
--
2. N2 (48 h)
,CHp
,
(Me3Si) (Me3Si)pN
PMe3
25
26
Equation 6
5.4.2 Tantalum There are only a few of these metal nitrides that have been reported and extensively characterized. Reaction of Cp*TaV(Me), 27 with excess ammonia provided Ta" nitride 28 (Eq. (7)). In this transformation, three of the methyl groups function as proton acceptors to yield methane gas [ l l , 121. Treatment of [Cp*TaV(Me)N],29 with Na/K afforded the reduced Cp*Ta"(Me)N- complex 30. This product could be readily reoxidized to the starting Tav trimer upon treating with Cp,Fe+ (Eq. (8)) 11%
Cp'Ta(Me)4
excess NH3
20 "C,2 d
N [Cp'Ta(Me)13 + CH4
(7)
28
27
Equation 7
! Cp'Ta( Me) 29
NalK
N
7 [Cp'fa(Me)]Cp2Fe+
30
Equations 8
Alkilidine tantalum complexes have also been utilized for the preparation of nitrido Tav. Reaction of ammonia with 31 or 32 afforded nitride 33 in moderate yields [14]. The structure of 33 has been determined by single-crystal X-ray crystallography and shown to consist of a pentameric complex, as depicted in Eq. (9). All of the Ta-N bond lengths are equivalent (2.00 A), suggesting a structure with extensive delocalization of the multiple bonds.
5.4 Transition Metal Nitride Complexes
-
(~-BuCH~)~T~(NM~&
31 (t-BuCH&Ta=CH'Bu
NH3
t-Bu f-BU t - B u ~ ] I-f-Bu ,Ta. ,Ta, N [ ( ~ - B u C H ~ ) ~ T ~t-Bu ]~ I N,I I NI I t-Bu \Ta' Ta' 'Ta&
I /'I
33
t-Bu t-Bu t-~,,
32
143
(9)
f-BU
Equation 9
5.4.3 Chromium The most common preparation of chromium nitrides involves the reaction of Cr"' with N-' reagents. The processes are remarkably facile and provide access to a wide range of complexes. In the typical reaction process, heating or irradiation of solutions of azides and CP' affords the corresponding nitrides in good yields for chromium coordinated with polydentate ligands such as porphyrins, phthalocyanine, salen, along with 1,4,7-triazacyclonane and diamide (see Chart 1) [Is, 16,6a, 171. The nitrides derived from tetradentate ligands such as salen, and porphyrin are typically 5-coordinate and square-pyramidal as determined by X-ray crystallography. In contrast, chromium nitrides derived from other ligands such as acac, tacac, pic, phen furnish 6-coordinate octahedral complexes. In addition to thermal and irradiation methods employing azides as the N-atom source, the combination of ammonia and a variety of oxidants has been known to be useful for the preparation of chromium nitrides containing porphyrin or phthalocyanine ligands (Eq. (10)) [ 181. N
oxidant
Equation 10
Another useful method that has been investigated is the transfer of nitride from one metal center to a another. Thus, porphyrin manganese nitrides have been documented to participate in nitrogen transfer reactions to Cp-porphyrin and CP'-salen to furnish the corresponding Cr-nitrides (Eq. (11)) [19].
144
Tomooka, Iikura, and Carreira N Crll'(L)+ Mn(Por)
36
-
37
N CrL + Mn"'(Por)
38
39
L = porphyrin or salen
Equation 11
The stability of the chromium nitride triple bond makes it possible to subject preformed Crv* nitrides to reductive conditions that produce the corresponding Crv nitride. A recent example of this process was reported in which treatment of 40 with N a g afforded nitride 41. X-ray crystallographic analysis revealed a dimeric complex with M,(p-N), core (Eq. (12)) [20].
40
41
Equation 12
As discussed above, the ligands that have been typically utilized for the preparation of chromium nitrides are multidentate. Consequently, ligand exchange reactions of such complexes are difficult and rare. Wieghardt and co-workers have reported such a process, however, for the synthesis of a nitrido chromium cyanide complex 43 (Eq. (13)) [18]. Thus, treatment of CrN(salen) 42 with excess sodium cyanide and tetramethyl ammonium chloride results in the formation of a six-coordinate pentacyano chromium nitride [21].
N Cr(salen) 42
Equation 13
NaCN
(NMe4)CI
[NMe4]2Na[CrN(CN)5]
43
5.4 Transition Metal Nitride Complexes
145
There has been remarkable progress recently in the chemistry of CrV' nitrido complexes, most notably by Cummins and co-workers. Thus, a variety of nitrides have been reported with ligands possessing N, 0, S, and C donor groups. Most of these have been prepared by ligand exchange processes and commence with CrN(NRR'), or CrN(OR),. Three different general nitride sources have been utilized in the preparation of these complexes, namely N3-, N1-, and No. The Cr"' nitrides incorporating alkoxide, amide, or halide ligands have been synthesized in this manner. The reaction of Crvr oxide 44 with the N3- reagent bis-(trimethylsily1)aminegave Crw nitride 45, as shown in Eq. (14) 1221. The formation of strong Si-0 bonds in the product likely provides a strong driving force for this process.
(NH4)2Cr207
Me3SiCl
N Cr(0t-B~)~
HN(Me3Si)z tert-BuOH
45
44
Equation 14
Cummins has reported that treatment of CrV' complex 47 with 48 at elevated temperature affords the corresponding nitride 49 (Eq. (15)) [23]. This method offers auseful alternativeto the other existing methodologiesfor the preparationof chromium nitrides. The thermodynamic stability of anthracene contributes significantly to the driving force for this process. Cummins has also reported the preparation of chromium nitride 51 from NO and a C p triamide 50, and (THF),V(Mes), (Eq. (16)) [24].
RIRN-Cr< N R R ~ NRR' 50
Equations 15- 16
1. NO
N NRR1
2. (THF)V(M~S)~* R'RN-Cr;
51
NRR'
146
Tomooku, Iikura, and Carreira
Ligand exchange reactions of monodentate amides, iodides, or alkoxide complexes with other amides, alkoxides as well as sulfides, and carbon ligands has been documented 123,251. A rather unique reaction of a trimethylsilylmethyl ligand bound to a chromium nitride has been reported; thus, reaction of tert-butyl isocyanide with 52 is reported to furnish 53 (17)).
(m.
52
53
Equation 17
5.4.4 Molybdenum
Nitrido molybdenum complexes have been reported for Mo"', Mov, and Mom. Among these, Mow nitrides have been the most extensively studied. For the other two classes of nitrido molybdenum complexes, phosphine and thioalkoxide ligands are common, as they are suggested to stabilize the lower oxidation states through Aback bonding. h i d e s are the sole reagent that has been utilized for the synthesis of Mow nitrides. For example, reaction of 54 with Me,SiN, gave 55; it has been proposed that an intermediate Mo" bis-azide complex is generated that subsequently undergoes further two-electron oxidation to give the observed Mow complex. It is interesting to note that in the presence of excess Me,SiN, further oxidation of the metal center was observed, leading to the formation of a trinuclear complex [26].
54
55
Equation 18
Ligand exchange reactions with nitrido molybdenum complex 56 has been documented (Eq. (19)).Treatment of 56 with 2 equiv. of HX (X = C1 or Br) leads to the formation of 57 which, following treatment with triethylamine, afforded 58, wherein a halide has been substituted for the wide ligand found in 56 [27]. The introduction of a nitride onto a Mo" complex has been carried out by treatment of Mom or Mow
5.4 Transition Metal Nitride Complexes
147
halide complexes with Me,SiN, in the presence of phosphine or thioalkoxide ligands [28,29]. Thus, treatment of 59 or 61 with Me,SiN, delivers the corresponding nitrides in good yields (Eqs. (20,21)).
MoC13(THF)2
Me3SiN3
N [MoC I~ (S ~ P (OR )~ ]~
-S2P10R)2
59
61
60
62
Equations 19 -21
The reduction of MoV'nitrides with iodide has also been reported. As shown in Eq. (22),reaction of nitrido MoV' nitrides with MePh,PI afforded the corresponding MoV nitride complex 65 [30]. In a related process, treatment of a nitrido MoV' complex with sodium naphthalide leads not only to the MoVnitride but also to the formation of a M O " ~ M O( P~-~N ) tetramer ~ [3 11. The structure of the latter product has been firmly established via single crystal X-ray crystallography.
148
Tomoka, Iikura, and Carreira N [MePPh3][MoC14] 63
MePhSPI
or N ..
N [MePPh&.[MoC14]
Ill
65
[MePPh3][MoC13] 64
Equation 22
The most commonly studied class of nitrido molybdenum complexes are Mov'derived. This family of complexes enjoy the widest versatility with regard to the wide range of preparative methods, as well as the large scope of ligand exchange processes in which they are observed to participate. A number of reagents have been employed for the generation of nitrido MoV' complexes, including N3-, N2-, N'- , and reagents and Moo, Mon, Mo"', Mow or Mov. The molybdenum-bound ligands can be quite varied with the complexes incorporating monodentate (alkoxide, amide, halide), as well as polydentate ligands (bipyridine, terpyridine). The use of (Me,Si),NH and urea as nitrogen sources for Mo"' and Mo" complexes, respectively has been documented (Eqs. (23,24)) [32]. By far the most common class of agents that serve as nitrogen sources in the synthesis of molybdenum nitrides are azides. The list of such reagents include TMSN,, NaN,,AgN,, (Et4N)N3, ClN,, and IN, [33]. Azides have also been utilized with Moo, Mon, and Mom complexes as starting materials, as shown in Eqs. (25-28).
MoCISGPCI~+
68
OC(NH&
69
-
N [MoCI~.OPCI& 70
5.4 Transition Metal Nitride Complexes Me3SiN3
MoX4
N MoL
P
(Ligand) 71
149
(25 1
72
Equations 23 -28
There are selected examples of the use of additional nitrogen sources such as NSCl, N,, and NCl, (Eqs. (29,30)). The molybdenum nitride halide complexes were isolated from the reaction of a Mo"' complex and NSCl in the presence of C1- or F- [34]. Cummins reported the remarkable reaction of low-valent Mo'" triamide with N, (1 atm) to afford the corresponding nitride 80 (Eq. (29)). The presence of bulky amide ligands is critical to the success of the reaction, for it prevents the formation of the stable dimer [(ArRN),Mo],.
Mo(NArR)3
N2
79
~
0 81
Equations 29,30
1
Mo(NArR)3 80
~
~
NC13 0 )
~
N MOCI~ 82
150
Tomooka, likura, and Carreira
Ligand exchange reactions of Mow nitrides are well documented. Thus, the formation of MoVINCl,, or [MoNCIJ, or MoN(OR), from N-, C-, S-, 0-,P-, and halide- donors have been studied 1351.
5.4.5 Tungsten
Only one nitrido Wrv complex has been documented. This was prepared by the action of Me,SiN, followed by oxidation on dinitrogen @ complex 83 (Eq. (31)) [36]. It has been proposed that the reaction of 83 with trimethylsilylazide affords a Wn complex bearing two N,-ligands; a subsequent two-electron oxidation of the metal center then affords nitrido tungsten complex 84.
83
84
Equation 31
A number of preparative methods are available for the synthesis of Ww nitrides. The reaction of Millon's base [Hg,N]Br with WBr, provides nitride 86 (Eq. (32)) [37]. The same reagent has been utilized in the synthesis of an interesting Wv complex 87 (Eq. (33)). This W,(p-N) complex can, in turn,be utilized to prepare a WN nitride 88. Thus, treatment of 87 with Ph,PBr leads to a disproportionation reaction affording 88 and 89.
WBr6 85
-
PPh4Br
[PPh4](W2NBr8] 87
Equations 32,33
[Hg2N]Br
N WBr3
86
!
[PPh4lWBr4l + [PPh41~"%Brl01 88
89
(33)
5.4 Transition Metal Nitride Complexes
151
Two organic reagents that function as a nitride sources have been reported for this class of componds, namely, N(SiMe,), and tris(trimethylsily1)benzamidine [38,39]. In an example involving the use of the former reagent, the reaction of N(SiMe,), with WC1, afforded WNCl, (Eq. (34)). Reaction of tris(trimethylsily1)benzamidine with tungsten hexachloride provided the corresponding Wv' nitride complex (Eq. (35)). Using a similar strategy, the nitrido Wv' chloride could be prepared. 1. PhC(NSiMe3)[N(SiMe3)z]
WC16
2. PhCN
90
WClS 92
*
WNC13.NCPh
(34)
91
PhC(NMe3Si)(NMe&.) 93
-
N WBr3(PhCN) + 3 Me3SiCl
(35)
94
Equations 34,35
As has been discussed in the preparation of Mo nitrides, by far the most commonly employed agents for the preparation of Wv' nitride are azides, such as Me,SiN,, IN,, ClN,, (Ph,P)N, [40-441. Both Wv and Wv' have been utilized as starting materials (Eq. (36)). In this regard, a single-crystal X-ray structure of the Wv' N-chloronitrido complex [ [C1,W(NC1),],C1}3- with bridging chlorine atoms has been reported [45]. The nitride is subsequently generated following heterolytic dissociation of the N- C1 bond.
Equation 36
An unusual reaction of W"' with nitriles has been reported by Schrock et al. to provide metal a nitrido tungsten complex 1461. Treatment of 98 with acetonitrile or benzonitrile provides the tungsten carbyne 99, along with the nitrido complex 100 (Eq. (37)). Additional studies resulted in the identification of reaction conditions that
152
Tornooka, Iikura, and Carreira
lead to the formation of the nitrido tungsten complex along with the symmetrical alkyne (Eq. (38)) [47].
RCN __F
R=MeorPh
FR
W(OmBu)3 99
!i
+
W(OmBu)3
(37)
100
(RO)3W=W(OR)3 101
Equations 37,38
In addition to the reagents described, NCI, has been reported to generate trichlorotungsten nitride 105 from the corresponding tungsten hexacarbonyl 104 (Eq. (39)).
104
105
Equation 39
5.4.6Manganese A number of nitrido manganese complexes have been reported. Most of these complexes are MnV,with only one example reported for MnVI1.These complexes typically incorporate polydentate ligands; thus, no examples could be found of simple halide or alkoxide nitrido manganese complexes. Since the original disclosure by Groves and co-workers that these could be utilized as nitrogen transfer reagents, they have received considerable attention 148,491 . Irradiation of manganese azides derived from Mn(III) porphyrin, cyclam, and polyamide complexes represents one of the earliest methods reported for the preparation of nitrido manganese complexes (Eq. (40)) [50]. Additional methods have become available for the synthesis of manganese nitrides that utilize ammonia in combination with oxidants such as Cl,, PhIO, NaClO, and NBS (Eq. (41)) [51-531. Employing these methods, the manganese nitrides incorporating porphyrin, phathlocyanine, cyclam, salen, and bidentate Schiff base complexes have been documen-
5.4 Transition Metal Nitride Complexes
153
ted [54]. Such methods represent some of the more versatile means for the preparation of nitrido manganese complexes. Carreira has reported that in cases involving more labile bidentate ligands, the use of NH,/NBS is preferred as a consequence of the mildness of the reaction conditions.
Mn"l(N3)L
hv
N MnVL
---+
107
106
MnlI'L
-
N MnVL
NH3, oxidant
109
108
Equations 40,41
The transfer of a nitrogen atom from a metal nitride to another metal complex is a process that works quite well with MnVnitrides. Thus manganese nitrides derived from porphyrin or salen ligands participate in nitride transfer reaction to salen and porphyrin Mnm complexes to give new nitrido manganese products (Eq. (42);Chart 2) [55,56].
!
Mn"'(L)+ Mn(L') 110
Equation 42
N
A Mn(L) 111
+
Mn"'(L') 112
(42)
154
a
Tomooka, likura, and Carreira
Ph
NH
N
-Ph
\
salen
Ph
Et
OEP
(=J2b
TPP
Chart 2
Ligand exchangeprocesses for Mnv nitrides are rather rare. This is probably due to the fact that such nitrides are typically prepared from kinetically and thermodynamically stable multidentate ligands such as porphyrins and salen. However, ligand exchangeprocesses have been noted for a selection of MnVnitrides possessing threecoordinate and four-coordinate ligands wherein treatment with CN- affords the corresponding cyan0 manganese nitrides [57,58]. The oxidation of bound porphyrin or phathalocyanine ligands complexed to manganese nitride has also been reported. However, in these cases the structure of the adduct has not been fully elucidated. Reduction of 115 followed by treatment with Me1 leads to bisrnethylation of the porphyrin core 116 (Scheme 3) [59]. Such a strategy provides new avenues for the preparation of novel porphyrin nitrido manganese complexes.
N Mn(salen) 113
Equation 43
NaCN, CsCl
----+
N CspNa[Mn(CN)s] 114
(43)
155
5.4 Transition Metal Nitride Complexes
-N
E
tN N
a
'M!V Et
\
'N \N
,I /
Et
Et
Et
2. 1. NaNp Me1
E
hiv
-N tN N
BMe
\N ,
Et
Me Et
\
N'
Et
115
Et
116
Scheme 3
A single example of a MnV" nitride has been documented [60]. Treatment of Mn(Nt-Bu),Cl with Li(NHt-Bu) leads to the formation of the corresponding nitride (Eq. (44)). The mechanistic postulate that accounts for the formation of the nitride is intriguing. It has been suggested that following coordination of the amide base, elimination of isobutylene leads to the formation of the observed product.
Li(NH t-Bu)
Mn(Nt-Bu)&I
M~(N~-BIJ)~
-
N
Mn(Nt-Bu)3 120
117
118
119
(44) Equation 44
5.4.7 Technicium Nitrido complexes of Tcv and Tcv' have been prepared and studied. The 99Tcvnitride complexes are stable and play an important role in nuclear medicine. Consequently, a large family of ligands have been investigated in the preparation of these complexes. The Tc"' nitrides are considerably less stable, and have a tendency to undergo reduction to the corresponding Tcv nitride complex. The introduction of a nitride ligand onto Tc-complexes is somewhat limited. However, 126 is easily prepared and, importantly, readily participates in ligand exchange reactions. This has permitted the
156
Tomooka, likura, and Camira
preparation of a number of complexes incorporating N, 0, S donors. The reaction of N,N-disubstituted hydrazines with [Bu4N]TcOC14in the presence of triphenylphosphine affords entry to the corresponding nitrido complex (Scheme 4) [61]. A number of different hydrazines have also been employed. The use of NaN, with a Tcvu starting material 124 has been shown to deliver the corresponding Tcv*-nitride (Eq. (45)) WI.
RR"NH2
or
N TcCI2(PPh&
PPh3
TcC14(PPh&
122
m N + N RR"NH2 = Ph2NNH2 or HN,
123
NH2oHCI
25 - 60 Yo
Scheme 4
[NH4]Tc04 124
NaN3 HX
( X = CI or Br)
NaTcNX4
(45)
125
Equation 45
The available methods for the synthesis of Tc-nitrides by introduction of the nitride ligand directly onto a pre-existing Tc complex are limited. However, the availability of TcNC1, and its ready participation in ligand exchange reactions allows for ready access to numerous complexes (Scheme 5). In this regard, a variety of ligands have been incorporated [63- 671. Ligand exchange reactions are also reported for a Tcv species, namely, TcNC1,(PPh3), [68].
Scheme 5
5.4 Transition Metal Nitride Complexes
157
5.4.8 Rhenium Rhenium nitrides have been reported for a wide range of Re-complexes including Re", ReV', and Rev". Azides, hydrazines, and NSCl have all been utilized in the reaction wih Re"', Re", and ReV" to give the corresponding ReV nitrides (Eqs. (46-49); Scheme 6) [69-711. ReX3(PPh3),
+
NaN3
-
!i
ReX2(PPh3),
128
129
ReCI4(NSCI)POC13
+
PPh3
130
PPh3 + EtOH + NaRe04 + HCI 132
HCI
ReC13(Por) 135 or
N ReC12(PPh& 131
NH2NH2
[ReO(Por)120 136
133
! ReC12(PPh3),
ReCt4(NSCt)(OPCl3) + PPh3 -----+
(48)
134
N Re(Por) 137
Equations 46-49
Scheme 6
(47)
ReO(OEt)C12(PPh3)2
NHzNH2
138
(46)
ReNC12(PPh3)2 139
(491
158
Tomooka, Iikura, and Carreira
A single example of a nitride introduction was reported for the synthesis of a Rew nitride. Treatment of ReC1, with ClN, afforded the corresponding Rew nitride (Eq. (50)) [72]. Reduction or oxidation processes on Re nitrides can provide entry into new nitrides (Eqs. (51, 52)) [73,74]. For example, when ReNCI, was treated with POC1, a tetrameric Re nitride was isolated. Similarly, as shown below treatment of Re" nitride in the presence of oxygen produced the Re"' nitride.
ReNCI4 + POCI~ 142
02
Na2(ReN(tipt)d 144
PPh4CI
N (ReCI3 POC13)4 143
(51)
N [PPh41[Re(tipt)41 145
A tip!
Equations 50-52
An alternative to the above methods are the ligand exchange reactions of ReNC1,[75 - 771. The preparation of ReV1'nitrides has been well studied, but although several different methodologies are available the ligands utilized a