Handbook of data structures and applications

208 downloads 1322 Views 11MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!

Report copyright / DMCA form

DOWNLOAD PDF

CHAPMAN & HALL/CRC COMPUTER and INFORMATION SCIENCE SERIES

Handbook of

DATA STRUCTURES and APPLICATIONS

© 2005 by Chapman & Hall/CRC

CHAPMAN & HALL/CRC COMPUTER and INFORMATION SCIENCE SERIES Series Editor: Sartaj Sahni

PUBLISHED TITLES HANDBOOK OF SCHEDULING: ALGORITHMS, MODELS, AND PERFORMANCE ANALYSIS Joseph Y-T. Leung THE PRACTICAL HANDBOOK OF INTERNET COMPUTING Munindar P. Singh HANDBOOK OF DATA STRUCTURES AND APPLICATIONS Dinesh P. Mehta and Sartaj Sahni

FORTHCOMING TITLES DISTRIBUTED SENSOR NETWORKS S. Sitharama Iyengar and Richard R. Brooks SPECULATIVE EXECUTION IN HIGH PERFORMANCE COMPUTER ARCHITECTURES David Kaeli and Pen-Chung Yew

© 2005 by Chapman & Hall/CRC

CHAPMAN & HALL/CRC COMPUTER and INFORMATION SCIENCE SERIES

Handbook of

DATA STRUCTURES and APPLICATIONS Edited by

Dinesh P. Mehta Colorado School of Mines Golden

and

Sartaj Sahni University of Florida Gainesville

CHAPMAN & HALL/CRC A CRC Press Company Boca Raton London New York Washington, D.C. © 2005 by Chapman & Hall/CRC

For Chapters 7, 20, and 23 the authors retain the copyright.

Library of Congress Cataloging-in-Publication Data Handbook of data structures and applications / edited by Dinesh P. Mehta and Sartaj Sahni. p. cm. — (Chapman & Hall/CRC computer & information science) Includes bibliographical references and index. ISBN 1-58488-435-5 (alk. paper) 1. System design—Handbooks, manuals, etc. 2. Data structures (Computer science)—Handbooks, manuals, etc. I. Mehta, Dinesh P. II. Sahni, Sartaj. III. Chapman & Hall/CRC computer and information science series QA76.9.S88H363 2004 005.7'3—dc22

2004055286

This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish reliable data and information, but the author and the publisher cannot assume responsibility for the validity of all materials or for the consequences of their use. Neither this book nor any part may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, microfilming, and recording, or by any information storage or retrieval system, without prior permission in writing from the publisher. All rights reserved. Authorization to photocopy items for internal or personal use, or the personal or internal use of specific clients, may be granted by CRC Press, provided that $1.50 per page photocopied is paid directly to Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923 USA. The fee code for users of the Transactional Reporting Service is ISBN 1-58488-435-5/04/$0.00+$1.50. The fee is subject to change without notice. For organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged. The consent of CRC Press does not extend to copying for general distribution, for promotion, for creating new works, or for resale. Specific permission must be obtained in writing from CRC Press for such copying. Direct all inquiries to CRC Press, 2000 N.W. Corporate Blvd., Boca Raton, Florida 33431. Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation, without intent to infringe.

Visit the CRC Press Web site at www.crcpress.com © 2005 by Chapman & Hall/CRC No claim to original U.S. Government works International Standard Book Number 1-58488-435-5 Library of Congress Card Number 2004055286 Printed in the United States of America 1 2 3 4 5 6 7 8 9 0 Printed on acid-free paper

© 2005 by Chapman & Hall/CRC

Dedication

To our wives, Usha Mehta and Neeta Sahni

© 2005 by Chapman & Hall/CRC

Preface In the late sixties, Donald Knuth, winner of the 1974 Turing Award, published his landmark book The Art of Computer Programming: Fundamental Algorithms. This book brought together a body of knowledge that deﬁned the data structures area. The term data structure, itself, was deﬁned in this book to be A table of data including structural relationships. Niklaus Wirth, the inventor of the Pascal language and winner of the 1984 Turing award, stated that “Algorithms + Data Structures = Programs”. The importance of algorithms and data structures has been recognized by the community and consequently, every undergraduate Computer Science curriculum has classes on data structures and algorithms. Both of these related areas have seen tremendous advances in the decades since the appearance of the books by Knuth and Wirth. Although there are several advanced and specialized texts and handbooks on algorithms (and related data structures), there is, to the best of our knowledge, no text or handbook that focuses exclusively on the wide variety of data structures that have been reported in the literature. The goal of this handbook is to provide a comprehensive survey of data structures of diﬀerent types that are in existence today. To this end, we have subdivided this handbook into seven parts, each of which addresses a diﬀerent facet of data structures. Part I is a review of introductory material. Although this material is covered in all standard data structures texts, it was included to make the handbook self-contained and in recognition of the fact that there are many practitioners and programmers who may not have had a formal education in Computer Science. Parts II, III, and IV discuss Priority Queues, Dictionary Structures, and Multidimensional structures, respectively. These are all well-known classes of data structures. Part V is a catch-all used for well-known data structures that eluded easy classiﬁcation. Parts I through V are largely theoretical in nature: they discuss the data structures, their operations and their complexities. Part VI addresses mechanisms and tools that have been developed to facilitate the use of data structures in real programs. Many of the data structures discussed in previous parts are very intricate and take some eﬀort to program. The development of data structure libraries and visualization tools by skilled programmers are of critical importance in reducing the gap between theory and practice. Finally, Part VII examines applications of data structures. The deployment of many data structures from Parts I through V in a variety of applications is discussed. Some of the data structures discussed here have been invented solely in the context of these applications and are not well-known to the broader community. Some of the applications discussed include Internet Routing, Web Search Engines, Databases, Data Mining, Scientiﬁc Computing, Geographical Information Systems, Computational Geometry, Computational Biology, VLSI Floorplanning and Layout, Computer Graphics and Image Processing. For data structure and algorithm researchers, we hope that the handbook will suggest new ideas for research in data structures and for an appreciation of the application contexts in which data structures are deployed. For the practitioner who is devising an algorithm, we hope that the handbook will lead to insights in organizing data that make it possible to solve the algorithmic problem more cleanly and eﬃciently. For researchers in speciﬁc application areas, we hope that they will gain some insight from the ways other areas have handled their data structuring problems. Although we have attempted to make the handbook as complete as possible, it is impossible to undertake a task of this magnitude without some omissions. For this, we apologize in advance and encourage readers to contact us with information about signiﬁcant data

© 2005 by Chapman & Hall/CRC

structures or applications that do not appear here. These could be included in future editions of this handbook. We would like to thank the excellent team of authors, who are at the forefront of research in data structures, that have contributed to this handbook. The handbook would not have been possible without their painstaking eﬀorts. We are extremely saddened by the untimely demise of a prominent data structures researcher, Professor G´ısli R. Hjaltason, who was to write a chapter for this handbook. He will be missed greatly by the Computer Science community. Finally, we would like to thank our families for their support during the development of the handbook.

Dinesh P. Mehta Sartaj Sahni

© 2005 by Chapman & Hall/CRC

About the Editors Dinesh P. Mehta Dinesh P. Mehta received the B.Tech. degree in computer science and engineering from the Indian Institute of Technology, Bombay, in 1987, the M.S. degree in computer science from the University of Minnesota in 1990, and the Ph.D. degree in computer science from the University of Florida in 1992. He was on the faculty at the University of Tennessee Space Institute from 1992-2000, where he received the Vice President’s Award for Teaching Excellence in 1997. He was a Visiting Professor at Intel’s Strategic CAD Labs in 1996 and 1997. He has been an Associate Professor in the Mathematical and Computer Sciences department at the Colorado School of Mines since 2000. Dr. Mehta is a co-author of the text Fundamentals of Data Structures in C + +. His publications and research interests are in VLSI design automation, parallel computing, and applied algorithms and data structures. His data structures-related research has involved the development or application of diverse data structures such as directed acyclic word graphs (DAWGs) for strings, corner stitching for VLSI layout, the Q-sequence ﬂoorplan representation, binary decision trees, Voronoi diagrams and TPR trees for indexing moving points. Dr. Mehta is currently an Associate Editor of the IEEE Transactions on Circuits and Systems-I. Sartaj Sahni Sartaj Sahni is a Distinguished Professor and Chair of Computer and Information Sciences and Engineering at the University of Florida. He is also a member of the European Academy of Sciences, a Fellow of IEEE, ACM, AAAS, and Minnesota Supercomputer Institute, and a Distinguished Alumnus of the Indian Institute of Technology, Kanpur. Dr. Sahni is the recipient of the 1997 IEEE Computer Society Taylor L. Booth Education Award, the 2003 IEEE Computer Society W. Wallace McDowell Award and the 2003 ACM Karl Karlstrom Outstanding Educator Award. Dr. Sahni received his B.Tech. (Electrical Engineering) degree from the Indian Institute of Technology, Kanpur, and the M.S. and Ph.D. degrees in Computer Science from Cornell University. Dr. Sahni has published over two hundred and ﬁfty research papers and written 15 texts. His research publications are on the design and analysis of eﬃcient algorithms, parallel computing, interconnection networks, design automation, and medical algorithms. Dr. Sahni is a co-editor-in-chief of the Journal of Parallel and Distributed Computing, a managing editor of the International Journal of Foundations of Computer Science, and a member of the editorial boards of Computer Systems: Science and Engineering, International Journal of High Performance Computing and Networking, International Journal of Distributed Sensor Networks and Parallel Processing Letters. He has served as program committee chair, general chair, and been a keynote speaker at many conferences. Dr. Sahni has served on several NSF and NIH panels and he has been involved as an external evaluator of several Computer Science and Engineering departments.

© 2005 by Chapman & Hall/CRC

Contributors Srinivas Aluru

Arne Andersson

Lars Arge

Iowa State University Ames, Iowa

Uppsala University Uppsala, Sweden

Duke University Durham, North Carolina

Sunil Arya

Surender Baswana

Mark de Berg

Hong Kong University of Science and Technology Kowloon, Hong Kong

Indian Institute of Technology, Delhi New Delhi, India

Technical University, Eindhoven Eindhoven, The Netherlands

Gerth Stølting Brodal

Bernard Chazelle

Chung-Kuan Cheng

University of Aarhus Aarhus, Denmark

Princeton University Princeton, New Jersey

University of California, San Diego San Diego, California

Siu-Wing Cheng

Camil Demetrescu

Narsingh Deo

Hong Kong University of Science and Technology Kowloon, Hong Kong

Universit´ a di Roma Rome, Italy

University of Central Florida Orlando, Florida

Sumeet Dua

Christian A. Duncan

Peter Eades

Louisiana Tech University Ruston, Louisiana

University of Miami Miami, Florida

University of Sydney and NICTA Sydney, Australia

Andrzej Ehrenfeucht

Rolf Fagerberg

Zhou Feng

University of Colorado, Boulder Boulder, Colorado

University of Southern Denmark Odense, Denmark

Fudan University Shanghai, China

Irene Finocchi

Michael L. Fredman

Teoﬁlo F. Gonzalez

Universit´ a di Roma Rome, Italy

Rutgers University, New Brunswick New Brunswick, New Jersey

University of California, Santa Barbara Santa Barbara, California

Michael T. Goodrich

Leonidas Guibas

S. Gunasekaran

University of California, Irvine Irvine, California

Stanford University Palo Alto, California

Louisiana State University Baton Rouge, Louisiana

Pankaj Gupta

Prosenjit Gupta

Joachim Hammer

Cypress Semiconductor San Jose, California

International Institute of Information Technology Hyderabad, India

University of Florida Gainesville, Florida

Monika Henzinger

Seok-Hee Hong

Wen-Lian Hsu

Google, Inc. Mountain View, California

University of Sydney and NICTA Sydney, Australia

Academia Sinica Taipei, Taiwan

Giuseppe F. Italiano

S. S. Iyengar

Ravi Janardan

Universit´ a di Roma Rome, Italy

Louisiana State University Baton Rouge, Louisiana

University of Minnesota Minneapolis, Minnesota

© 2005 by Chapman & Hall/CRC

Haim Kaplan

Kun Suk Kim

Vipin Kumar

Tel Aviv University Tel Aviv, Israel

University of Florida Gainesville, Florida

University of Minnesota Minneapolis, Minnesota

Stefan Kurtz

Kim S. Larsen

D. T. Lee

University of Hamburg Hamburg, Germany

University of Southern Denmark Odense, Denmark

Academia Sinica Taipei, Taiwan

Sebastian Leipert

Scott Leutenegger

Ming C. Lin

Center of Advanced European Studies and Research Bonn, Germany

University of Denver Denver, Colorado

University of North Carolina Chapel Hill, North Carolina

Stefano Lonardi

Mario A. Lopez

Haibin Lu

University of California, Riverside Riverside, California

University of Denver Denver, Colorado

University of Florida Gainesville, Florida

S. N. Maheshwari

Dinesh Manocha

Ross M. McConnell

Indian Institute of Technology, Delhi New Delhi, India

University of North Carolina Chapel Hill, North Carolina

Colorado State University Fort Collins, Colorado

Dale McMullin

Dinesh P. Mehta

Mark Moir

Colorado School of Mines Golden, Colorado

Colorado School of Mines Golden, Colorado

Sun Microsystems Laboratories Burlington, Massachusetts

Pat Morin

David M. Mount

J. Ian Munro

Carleton University Ottawa, Canada

University of Maryland College Park, Maryland

University of Waterloo Ontario, Canada

Stefan Naeher

Bruce F. Naylor

Chris Okasaki

University of Trier Trier, Germany

University of Texas, Austin Austin, Texas

United States Military Academy West Point, New York

C. Pandu Rangan

Alex Pothen

Alyn Rockwood

Indian Institute of Technology, Madras Chennai, India

Old Dominion University Norfolk, Virginia

Colorado School of Mines Golden, Colorado

S. Srinivasa Rao

Rajeev Raman

Wojciech Rytter

University of Waterloo Ontario, Canada

University of Leicester Leicester, United Kingdom

New Jersey Institute of Technology Newark, New Jersey & Warsaw University Warsaw, Poland

Sartaj Sahni

Hanan Samet

Sanjeev Saxena

University of Florida Gainesville, Florida

University of Maryland College Park, Maryland

Indian Institute of Technology, Kanpur Kanpur, India

© 2005 by Chapman & Hall/CRC

Markus Schneider

Bernhard Seeger

Sandeep Sen

University of Florida Gainesville, Florida

University of Marburg Marburg, Germany

Indian Institute of Technology, Delhi New Delhi, India

Nir Shavit

Michiel Smid

Bettina Speckmann

Sun Microsystems Laboratories Burlington, Massachusetts

Carleton University Ottawa, Canada

Technical University, Eindhoven Eindhoven, The Netherlands

John Stasko

Michael Steinbach

Roberto Tamassia

Georgia Institute of Technology Atlanta, Georgia

University of Minnesota Minneapolis, Minnesota

Brown University Providence, Rhode Island

Pang-Ning Tang

Sivan Toledo

Luca Vismara

Michigan State University East Lansing, Michigan

Tel Aviv University Tel Aviv, Israel

Brown University Providence, Rhode Island

V. K. Vaishnavi

Jeﬀrey Scott Vitter

Mark Allen Weiss

Georgia State University Atlanta, Georgia

Purdue University West Lafayette, Indiana

Florida International University Miami, Florida

Peter Widmayer

Bo Yao

Donghui Zhang

ETH Z¨ urich, Switzerland

University of California, San Diego San Diego, California

Northeastern University Boston, Massachusetts

© 2005 by Chapman & Hall/CRC

Contents Part I: 1 2 3 4

Analysis of Algorithms Sartaj Sahni Basic Structures Dinesh P. Mehta . Trees Dinesh P. Mehta . . . . . . . . Graphs Narsingh Deo . . . . . . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

1-1 2-1 3-1 4-1

Leftist Trees Sartaj Sahni . . . . . . . . . . . . . . . . . . . . . Skew Heaps C. Pandu Rangan . . . . . . . . . . . . . . . . . . Binomial, Fibonacci, and Pairing Heaps Michael L. Fredman Double-Ended Priority Queues Sartaj Sahni . . . . . . . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

5-1 6-1 7-1 8-1

Part II: 5 6 7 8

Part III: 9 10 11 12 13 14 15

27

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

Priority Queues

Dictionary Structures

Hash Tables Pat Morin . . . . . . . . . . . . . . . . . . . . . . . . . . . . Balanced Binary Search Trees Arne Andersson, Rolf Fagerberg, and Kim S. Larsen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finger Search Trees Gerth Stølting Brodal . . . . . . . . . . . . . . . . Splay Trees Sanjeev Saxena . . . . . . . . . . . . . . . . . . . . . . . . . Randomized Dictionary Structures C. Pandu Rangan . . . . . . . . . Trees with Minimum Weighted Path Length Wojciech Rytter . . . . B Trees Donghui Zhang . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Part IV: 16 17 18 19 20 21 22 23 24 25 26

Fundamentals

9-1 10-1 11-1 12-1 13-1 14-1 15-1

Multidimensional and Spatial Structures

Multidimensional Spatial Data Structures Hanan Samet . . . . . . . 16-1 Planar Straight Line Graphs Siu-Wing Cheng . . . . . . . . . . . . . . 17-1 Interval, Segment, Range, and Priority Search Trees D. T. Lee . . . . 18-1 Quadtrees and Octrees Srinivas Aluru . . . . . . . . . . . . . . . . . . . 19-1 Bruce F. Naylor . . . . . . . . . . . . 20-1 Binary Space Partitioning Trees R-trees Scott Leutenegger and Mario A. Lopez . . . . . . . . . . . . . 21-1 Managing Spatio-Temporal Data Sumeet Dua and S. S. Iyengar . . 22-1 Kinetic Data Structures Leonidas Guibas . . . . . . . . . . . . . . . . . 23-1 Online Dictionary Structures Teoﬁlo F. Gonzalez . . . . . . . . . . . . 24-1 Bernard Chazelle . . . . . . . . . . . . . . . . . . . . . . . . . . 25-1 Cuttings Approximate Geometric Query Structures Christian A. Duncan and Michael T. Goodrich . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-1 Geometric and Spatial Data Structures in External Memory Jeﬀrey Scott Vitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-1

© 2005 by Chapman & Hall/CRC

Part V: 28 29 30 31 32 33 34 35 36 37 38 39

Tries Sartaj Sahni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-1 Suﬃx Trees and Suﬃx Arrays Srinivas Aluru . . . . . . . . . . . . . . 29-1 String Searching Andrzej Ehrenfeucht and Ross M. McConnell . . . . 30-1 Persistent Data Structures Haim Kaplan . . . . . . . . . . . . . . . . . 31-1 PQ Trees, PC Trees, and Planar Graphs Wen-Lian Hsu and Ross M. McConnell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-1 Data Structures for Sets Rajeev Raman . . . . . . . . . . . . . . . . . . 33-1 Cache-Oblivious Data Structures Lars Arge, Gerth Stølting Brodal, and Rolf Fagerberg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-1 Dynamic Trees Camil Demetrescu, Irene Finocchi, and Giuseppe F. Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-1 Dynamic Graphs Camil Demetrescu, Irene Finocchi, and Giuseppe F. Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-1 Succinct Representation of Data Structures J. Ian Munro and S. Srinivasa Rao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-1 Randomized Graph Data-Structures for Approximate Shortest Paths Surender Baswana and Sandeep Sen . . . . . . . . . . . . . . . . . . . . . . . . . 38-1 Searching and Priority Queues in o(log n) Time Arne Andersson . . 39-1

Part VI: 40 41 42 43 44 45 46 47

54 55 56

Data Structures in Languages and Libraries

Functional Data Structures Chris Okasaki . . . . . . . . . . . . . . . . LEDA, a Platform for Combinatorial and Geometric Computing Stefan Naeher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data Structures in C++ Mark Allen Weiss . . . . . . . . . . . . . . . . Data Structures in JDSL Michael T. Goodrich, Roberto Tamassia, and Luca Vismara . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data Structure Visualization John Stasko . . . . . . . . . . . . . . . . . Drawing Trees Sebastian Leipert . . . . . . . . . . . . . . . . . . . . . . Drawing Graphs Peter Eades and Seok-Hee Hong . . . . . . . . . . . . Concurrent Data Structures Mark Moir and Nir Shavit . . . . . . . .

Part VII: 48 49 50 51 52 53

Miscellaneous Data Structures

40-1 41-1 42-1 43-1 44-1 45-1 46-1 47-1

Applications

IP Router Tables Sartaj Sahni, Kun Suk Kim, and Haibin Lu . . . Multi-Dimensional Packet Classiﬁcation Pankaj Gupta . . . . . . . . Data Structures in Web Information Retrieval Monika Henzinger . . The Web as a Dynamic Graph S. N. Maheshwari . . . . . . . . . . . . Layout Data Structures Dinesh P. Mehta . . . . . . . . . . . . . . . . . Floorplan Representation in VLSI Zhou Feng, Bo Yao, and ChungKuan Cheng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Computer Graphics Dale McMullin and Alyn Rockwood . . . . . . . Geographic Information Systems Bernhard Seeger and Peter Widmayer Collision Detection Ming C. Lin and Dinesh Manocha . . . . . . . . .

© 2005 by Chapman & Hall/CRC

48-1 49-1 50-1 51-1 52-1 53-1 54-1 55-1 56-1

57 58 59 60 61 62 63 64

Image Data Structures S. S. Iyengar, V. K. Vaishnavi, and S. Gunasekaran . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-1 Computational Biology Stefan Kurtz and Stefano Lonardi . . . . . . 58-1 Elimination Structures in Scientiﬁc Computing Alex Pothen and Sivan Toledo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-1 Data Structures for Databases Joachim Hammer and Markus Schneider 60-1 Data Mining Vipin Kumar, Pang-Ning Tan, and Michael Steinbach 61-1 Computational Geometry: Fundamental Structures Mark de Berg and Bettina Speckmann . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-1 Computational Geometry: Proximity and Location Sunil Arya and David M. Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-1 Computational Geometry: Generalized Intersection Searching Prosenjit Gupta, Ravi Janardan, and Michiel Smid . . . . . . . . . . . . . . . . . . 64-1

© 2005 by Chapman & Hall/CRC

I Fundamentals 1 Analysis of Algorithms

Sartaj Sahni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

Introduction • Operation Counts • Step Counts • Counting Cache Misses • Asymptotic Complexity • Recurrence Equations • Amortized Complexity • Practical Complexities

2 Basic Structures Introduction

3 Trees

•

Arrays

Dinesh P. Mehta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . •

Linked Lists

• •

Binary Trees and Properties Binary Search Trees • Heaps

• •

3-1

Binary Tree Tournament

Narsingh Deo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction • Graph Representations • Connectivity, Distance, and Spanning Trees • Searching a Graph • Simple Applications of DFS and BFS • Minimum Spanning Tree • Shortest Paths • Eulerian and Hamiltonian Graphs

© 2005 by Chapman & Hall/CRC

2-1

Stacks and Queues

Dinesh P. Mehta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction • Tree Representation Traversals • Threaded Binary Trees Trees

4 Graphs

•

4-1

1 Analysis of Algorithms 1.1 1.2 1.3 1.4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation Counts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step Counts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Counting Cache Misses . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1 1-2 1-4 1-6

A Simple Computer Model • Eﬀect of Cache Misses on Run Time • Matrix Multiplication

1.5

Asymptotic Complexity . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-9

Big Oh Notation (O ) • Omega (Ω) and Theta (Θ) Notations • Little Oh Notation (o)

1.6

Recurrence Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Substitution Method

1.7

1.1

1-12

Table-Lookup Method

Amortized Complexity . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-14

What is Amortized Complexity? • Maintenance Contract • The McWidget Company • Subset Generation

Sartaj Sahni University of Florida

•

1.8

Practical Complexities . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-23

Introduction

The topic “Analysis of Algorithms” is concerned primarily with determining the memory (space) and time requirements (complexity) of an algorithm. Since the techniques used to determine memory requirements are a subset of those used to determine time requirements, in this chapter, we focus on the methods used to determine the time complexity of an algorithm. The time complexity (or simply, complexity) of an algorithm is measured as a function of the problem size. Some examples are given below. 1. The complexity of an algorithm to sort n elements may be given as a function of n. 2. The complexity of an algorithm to multiply an m × n matrix and an n × p matrix may be given as a function of m, n, and p. 3. The complexity of an algorithm to determine whether x is a prime number may be given as a function of the number, n, of bits in x. Note that n = log2 (x + 1). We partition our discussion of algorithm analysis into the following sections. 1. Operation counts. 2. Step counts. 3. Counting cache misses.

1-1

© 2005 by Chapman & Hall/CRC

1-2

4. 5. 6. 7.

Handbook of Data Structures and Applications Asymptotic complexity. Recurrence equations. Amortized complexity. Practical complexities.

See [1, 3–5] for additional material on algorithm analysis.

1.2

Operation Counts

One way to estimate the time complexity of a program or method is to select one or more operations, such as add, multiply, and compare, and to determine how many of each is done. The success of this method depends on our ability to identify the operations that contribute most to the time complexity. Example 1.1

[Max Element] Figure 1.1 gives an algorithm that returns the position of the largest element in the array a[0:n-1]. When n > 0, the time complexity of this algorithm can be estimated by determining the number of comparisons made between elements of the array a. When n ≤ 1, the for loop is not entered. So no comparisons between elements of a are made. When n > 1, each iteration of the for loop makes one comparison between two elements of a, and the total number of element comparisons is n-1. Therefore, the number of element comparisons is max{n-1, 0}. The method max performs other comparisons (for example, each iteration of the for loop is preceded by a comparison between i and n) that are not included in the estimate. Other operations such as initializing positionOfCurrentMax and incrementing the for loop index i are also not included in the estimate.

int max(int [] a, int n) { if (n < 1) return -1; // no max int positionOfCurrentMax = 0; for (int i = 1; i < n; i++) if (a[positionOfCurrentMax] < a[i]) positionOfCurrentMax = i; return positionOfCurrentMax; } FIGURE 1.1: Finding the position of the largest element in a[0:n-1].

The algorithm of Figure 1.1 has the nice property that the operation count is precisely determined by the problem size. For many other problems, however, this is not so. Figure 1.2 gives an algorithm that performs one pass of a bubble sort. In this pass, the largest element in a[0:n-1] relocates to position a[n-1]. The number of swaps performed by this algorithm depends not only on the problem size n but also on the particular values of the elements in the array a. The number of swaps varies from a low of 0 to a high of n − 1.

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1-3

void bubble(int [] a, int n) { for (int i = 0; i < n - 1; i++) if (a[i] > a[i+1]) swap(a[i], a[i+1]); } FIGURE 1.2: A bubbling pass.

Since the operation count isn’t always uniquely determined by the problem size, we ask for the best, worst, and average counts. Example 1.2

[Sequential Search] Figure 1.3 gives an algorithm that searches a[0:n-1] for the ﬁrst occurrence of x. The number of comparisons between x and the elements of a isn’t uniquely determined by the problem size n. For example, if n = 100 and x = a[0], then only 1 comparison is made. However, if x isn’t equal to any of the a[i]s, then 100 comparisons are made. A search is successful when x is one of the a[i]s. All other searches are unsuccessful. Whenever we have an unsuccessful search, the number of comparisons is n. For successful searches the best comparison count is 1, and the worst is n. For the average count assume that all array elements are distinct and that each is searched for with equal frequency. The average count for a successful search is 1 i = (n + 1)/2 n i=1 n

int sequentialSearch(int [] a, int n, int x) { // search a[0:n-1] for x int i; for (i = 0; i < n && x != a[i]; i++); if (i == n) return -1; // not found else return i; } FIGURE 1.3: Sequential search.

Example 1.3

[Insertion into a Sorted Array] Figure 1.4 gives an algorithm to insert an element x into a sorted array a[0:n-1]. We wish to determine the number of comparisons made between x and the elements of a. For the problem size, we use the number n of elements initially in a. Assume that n ≥ 1. The best or minimum number of comparisons is 1, which happens when the new element x

© 2005 by Chapman & Hall/CRC

1-4

Handbook of Data Structures and Applications

void insert(int [] a, int n, int x) { // find proper place for x int i; for (i = n - 1; i >= 0 && x < a[i]; i--) a[i+1] = a[i]; a[i+1] = x;

// insert x

} FIGURE 1.4: Inserting into a sorted array. is to be inserted at the right end. The maximum number of comparisons is n, which happens when x is to be inserted at the left end. For the average assume that x has an equal chance of being inserted into any of the possible n+1 positions. If x is eventually inserted into position i+1 of a, i ≥ 0, then the number of comparisons is n-i. If x is inserted into a[0], the number of comparisons is n. So the average count is n−1 n 1 n(n + 1) n n 1 1 ( ( ( + n) = + (n − i) + n) = j + n) = n + 1 i=0 n + 1 j=1 n+1 2 2 n+1

This average count is almost 1 more than half the worst-case count.

1.3

Step Counts

The operation-count method of estimating time complexity omits accounting for the time spent on all but the chosen operations. In the step-count method, we attempt to account for the time spent in all parts of the algorithm. As was the case for operation counts, the step count is a function of the problem size. A step is any computation unit that is independent of the problem size. Thus 10 additions can be one step; 100 multiplications can also be one step; but n additions, where n is the problem size, cannot be one step. The amount of computing represented by one step may be diﬀerent from that represented by another. For example, the entire statement return a+b+b*c+(a+b-c)/(a+b)+4; can be regarded as a single step if its execution time is independent of the problem size. We may also count a statement such as x = y; as a single step. To determine the step count of an algorithm, we ﬁrst determine the number of steps per execution (s/e) of each statement and the total number of times (i.e., frequency) each statement is executed. Combining these two quantities gives us the total contribution of each statement to the total step count. We then add the contributions of all statements to obtain the step count for the entire algorithm.

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1-5

Statement int sequentialSearch(· · · ) { int i; for (i = 0; i < n && x != a[i]; i++); if (i == n) return -1; else return i; } Total

TABLE 1.1

Total steps 0 0 1 1 1 1 0 4

s/e 0 0 1 1 1 1 0

Frequency 0 0 1 n+1 1 0 0

Total steps 0 0 1 n+1 1 0 0 n+3

s/e 0 0 1 1 1 1 0

Frequency 0 0 1 j+1 1 1 0

Total steps 0 0 1 j+1 1 1 0 j+4

Worst-case step count for Figure 1.3

Statement int sequentialSearch(· · · ) { int i; for (i = 0; i < n && x != a[i]; i++); if (i == n) return -1; else return i; } Total

TABLE 1.3

Frequency 0 0 1 1 1 1 0

Best-case step count for Figure 1.3

Statement int sequentialSearch(· · · ) { int i; for (i = 0; i < n && x != a[i]; i++); if (i == n) return -1; else return i; } Total

TABLE 1.2

s/e 0 0 1 1 1 1 0

Step count for Figure 1.3 when x = a[j]

Example 1.4

[Sequential Search] Tables 1.1 and 1.2 show the best- and worst-case step-count analyses for sequentialSearch (Figure 1.3). For the average step-count analysis for a successful search, we assume that the n values in a are distinct and that in a successful search, x has an equal probability of being any one of these values. Under these assumptions the average step count for a successful search is the sum of the step counts for the n possible successful searches divided by n. To obtain this average, we ﬁrst obtain the step count for the case x = a[j] where j is in the range [0, n − 1] (see Table 1.3). Now we obtain the average step count for a successful search: n−1 1 (j + 4) = (n + 7)/2 n j=0

This value is a little more than half the step count for an unsuccessful search. Now suppose that successful searches occur only 80 percent of the time and that each a[i] still has the same probability of being searched for. The average step count for sequentialSearch is .8 ∗ (average count for successful searches) + .2 ∗ (count for an unsuccessful search) = .8(n + 7)/2 + .2(n + 3) = .6n + 3.4

© 2005 by Chapman & Hall/CRC

1-6

1.4 1.4.1

Handbook of Data Structures and Applications

Counting Cache Misses A Simple Computer Model

Traditionally, the focus of algorithm analysis has been on counting operations and steps. Such a focus was justiﬁed when computers took more time to perform an operation than they took to fetch the data needed for that operation. Today, however, the cost of performing an operation is signiﬁcantly lower than the cost of fetching data from memory. Consequently, the run time of many algorithms is dominated by the number of memory references (equivalently, number of cache misses) rather than by the number of operations. Hence, algorithm designers focus on reducing not only the number of operations but also the number of memory accesses. Algorithm designers focus also on designing algorithms that hide memory latency. Consider a simple computer model in which the computer’s memory consists of an L1 (level 1) cache, an L2 cache, and main memory. Arithmetic and logical operations are performed by the arithmetic and logic unit (ALU) on data resident in registers (R). Figure 1.5 gives a block diagram for our simple computer model.

ALU R

L1

L2

main memory

FIGURE 1.5: A simple computer model.

Typically, the size of main memory is tens or hundreds of megabytes; L2 cache sizes are typically a fraction of a megabyte; L1 cache is usually in the tens of kilobytes; and the number of registers is between 8 and 32. When you start your program, all your data are in main memory. To perform an arithmetic operation such as an add, in our computer model, the data to be added are ﬁrst loaded from memory into registers, the data in the registers are added, and the result is written to memory. Let one cycle be the length of time it takes to add data that are already in registers. The time needed to load data from L1 cache to a register is two cycles in our model. If the required data are not in L1 cache but are in L2 cache, we get an L1 cache miss and the required data are copied from L2 cache to L1 cache and the register in 10 cycles. When the required data are not in L2 cache either, we have an L2 cache miss and the required data are copied from main memory into L2 cache, L1 cache, and the register in 100 cycles. The write operation is counted as one cycle even when the data are written to main memory because we do not wait for the write to complete before proceeding to the next operation. For more details on cache organization, see [2].

1.4.2

Eﬀect of Cache Misses on Run Time

For our simple model, the statement a = b + c is compiled into the computer instructions load a; load b; add; store c;

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1-7

where the load operations load data into registers and the store operation writes the result of the add to memory. The add and the store together take two cycles. The two loads may take anywhere from 4 cycles to 200 cycles depending on whether we get no cache miss, L1 misses, or L2 misses. So the total time for the statement a = b + c varies from 6 cycles to 202 cycles. In practice, the variation in time is not as extreme because we can overlap the time spent on successive cache misses. Suppose that we have two algorithms that perform the same task. The ﬁrst algorithm does 2000 adds that require 4000 load, 2000 add, and 2000 store operations and the second algorithm does 1000 adds. The data access pattern for the ﬁrst algorithm is such that 25 percent of the loads result in an L1 miss and another 25 percent result in an L2 miss. For our simplistic computer model, the time required by the ﬁrst algorithm is 2000 ∗ 2 (for the 50 percent loads that cause no cache miss) + 1000 ∗ 10 (for the 25 percent loads that cause an L1 miss) + 1000 ∗ 100 (for the 25 percent loads that cause an L2 miss) + 2000 ∗ 1 (for the adds) + 2000 ∗ 1 (for the stores) = 118,000 cycles. If the second algorithm has 100 percent L2 misses, it will take 2000 ∗ 100 (L2 misses) + 1000 ∗ 1 (adds) + 1000 ∗ 1 (stores) = 202,000 cycles. So the second algorithm, which does half the work done by the ﬁrst, actually takes 76 percent more time than is taken by the ﬁrst algorithm. Computers use a number of strategies (such as preloading data that will be needed in the near future into cache, and when a cache miss occurs, the needed data as well as data in some number of adjacent bytes are loaded into cache) to reduce the number of cache misses and hence reduce the run time of a program. These strategies are most eﬀective when successive computer operations use adjacent bytes of main memory. Although our discussion has focused on how cache is used for data, computers also use cache to reduce the time needed to access instructions.

1.4.3

Matrix Multiplication

The algorithm of Figure 1.6 multiplies two square matrices that are represented as twodimensional arrays. It performs the following computation:

c[i][j] =

n

a[i][k] ∗ b[k][j], 1 ≤ i ≤ n, 1 ≤ j ≤ n

k=1

void squareMultiply(int [][] a, int [][] b, int [][] c, int n) { for (int i = 0; i < n; i++) for (int j = 0; j < n; j++) { int sum = 0; for (int k = 0; k < n; k++) sum += a[i][k] * b[k][j]; c[i][j] = sum; } } FIGURE 1.6: Multiply two n × n matrices.

© 2005 by Chapman & Hall/CRC

(1.1)

1-8

Handbook of Data Structures and Applications

Figure 1.7 is an alternative algorithm that produces the same two-dimensional array c as is produced by Figure 1.6. We observe that Figure 1.7 has two nested for loops that are not present in Figure 1.6 and does more work than is done by Figure 1.6 with respect to indexing into the array c. The remainder of the work is the same. void fastSquareMultiply(int [][] a, int [][] b, int [][] c, int n) { for (int i = 0; i < n; i++) for (int j = 0; j < n; j++) c[i][j] = 0; for (int i = 0; i < n; i++) for (int j = 0; j < n; j++) for (int k = 0; k < n; k++) c[i][j] += a[i][k] * b[k][j]; } FIGURE 1.7: Alternative algorithm to multiply square matrices.

You will notice that if you permute the order of the three nested for loops in Figure 1.7, you do not aﬀect the result array c. We refer to the loop order in Figure 1.7 as ijk order. When we swap the second and third for loops, we get ikj order. In all, there are 3! = 6 ways in which we can order the three nested for loops. All six orderings result in methods that perform exactly the same number of operations of each type. So you might think all six take the same time. Not so. By changing the order of the loops, we change the data access pattern and so change the number of cache misses. This in turn aﬀects the run time. In ijk order, we access the elements of a and c by rows; the elements of b are accessed by column. Since elements in the same row are in adjacent memory and elements in the same column are far apart in memory, the accesses of b are likely to result in many L2 cache misses when the matrix size is too large for the three arrays to ﬁt into L2 cache. In ikj order, the elements of a, b, and c are accessed by rows. Therefore, ikj order is likely to result in fewer L2 cache misses and so has the potential to take much less time than taken by ijk order. For a crude analysis of the number of cache misses, assume we are interested only in L2 misses; that an L2 cache-line can hold w matrix elements; when an L2 cache-miss occurs, a block of w matrix elements is brought into an L2 cache line; and that L2 cache is small compared to the size of a matrix. Under these assumptions, the accesses to the elements of a, b and c in ijk order, respectively, result in n3 /w, n3 , and n2 /w L2 misses. Therefore, the total number of L2 misses in ijk order is n3 (1 + w + 1/n)/w. In ikj order, the number of L2 misses for our three matrices is n2 /w, n3 /w, and n3 /w, respectively. So, in ikj order, the total number of L2 misses is n3 (2 + 1/n)/w. When n is large, the ration of ijk misses to ikj misses is approximately (1 + w)/2, which is 2.5 when w = 4 (for example when we have a 32-byte cache line and the data is double precision) and 4.5 when w = 8 (for example when we have a 64-byte cache line and double-precision data). For a 64-byte cache line and single-precision (i.e., 4 byte) data, w = 16 and the ratio is approximately 8.5. Figure 1.8 shows the normalized run times of a Java version of our matrix multiplication algorithms. In this ﬁgure, mult refers to the multiplication algorithm of Figure 1.6. The

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1-9

normalized run time of a method is the time taken by the method divided by the time taken by ikj order. 1.2 1.1 1

0

n = 500

n = 1000 mult

ijk

n = 2000 ikj

FIGURE 1.8: Normalized run times for matrix multiplication.

Matrix multiplication using ikj order takes 10 percent less time than does ijk order when the matrix size is n = 500 and 16 percent less time when the matrix size is 2000. Equally surprising is that ikj order runs faster than the algorithm of Figure 1.6 (by about 5 percent when n = 2000). This despite the fact that ikj order does more work than is done by the algorithm of Figure 1.6.

1.5 1.5.1

Asymptotic Complexity Big Oh Notation (O)

Let p(n) and q(n) be two nonnegative functions. p(n) is asymptotically bigger (p(n) asymptotically dominates q(n)) than the function q(n) iﬀ q(n) =0 n→∞ p(n) lim

(1.2)

q(n) is asymptotically smaller than p(n) iﬀ p(n) is asymptotically bigger than q(n). p(n) and q(n) are asymptotically equal iﬀ neither is asymptotically bigger than the other. Example 1.5

Since lim

10n + 7 10/n + 7/n2 = = 0/3 = 0 + 2n + 6 3 + 2/n + 6/n2

n→∞ 3n2

3n2 + 2n + 6 is asymptotically bigger than 10n + 7 and 10n + 7 is asymptotically smaller than 3n2 + 2n + 6. A similar derivation shows that 8n4 + 9n2 is asymptotically bigger than 100n3 − 3, and that 2n2 + 3n is asymptotically bigger than 83n. 12n + 6 is asymptotically equal to 6n + 2. In the following discussion the function f (n) denotes the time or space complexity of an algorithm as a function of the problem size n. Since the time or space requirements of

© 2005 by Chapman & Hall/CRC

1-10

Handbook of Data Structures and Applications

a program are nonnegative quantities, we assume that the function f has a nonnegative value for all values of n. Further, since n denotes an instance characteristic, we assume that n ≥ 0. The function f (n) will, in general, be a sum of terms. For example, the terms of f (n) = 9n2 + 3n + 12 are 9n2 , 3n, and 12. We may compare pairs of terms to determine which is bigger. The biggest term in the example f (n) is 9n2 . Figure 1.9 gives the terms that occur frequently in a step-count analysis. Although all the terms in Figure 1.9 have a coeﬃcient of 1, in an actual analysis, the coeﬃcients of these terms may have a diﬀerent value.

Term 1 log n n n log n n2 n3 2n n!

Name constant logarithmic linear n log n quadratic cubic exponential factorial

FIGURE 1.9: Commonly occurring terms.

We do not associate a logarithmic base with the functions in Figure 1.9 that include log n because for any constants a and b greater than 1, loga n = logb n/ logb a. So loga n and logb n are asymptotically equal. The deﬁnition of asymptotically smaller implies the following ordering for the terms of Figure 1.9 (< is to be read as “is asymptotically smaller than”): 1 < log n < n < n log n < n2 < n3 < 2n < n! Asymptotic notation describes the behavior of the time or space complexity for large instance characteristics. Although we will develop asymptotic notation with reference to step counts alone, our development also applies to space complexity and operation counts. The notation f (n) = O(g(n)) (read as “f (n) is big oh of g(n)”) means that f (n) is asymptotically smaller than or equal to g(n). Therefore, in an asymptotic sense g(n) is an upper bound for f (n). Example 1.6

From Example 1.5, it follows that 10n+ 7 = O(3n2 + 2n+ 6); 100n3 − 3 = O(8n4 + 9n2 ). We see also that 12n + 6 = O(6n + 2); 3n2 + 2n + 6 = O(10n + 7); and 8n4 + 9n2 = O(100n3 − 3). Although Example 1.6 uses the big oh notation in a correct way, it is customary to use g(n) functions that are unit terms (i.e., g(n) is a single term whose coeﬃcient is 1) except when f (n) = 0. In addition, it is customary to use, for g(n), the smallest unit term for which the statement f (n) = O(g(n)) is true. When f (n) = 0, it is customary to use g(n) = 0. Example 1.7

The customary way to describe the asymptotic behavior of the functions used in Example 1.6 is 10n + 7 = O(n); 100n3 − 3 = O(n3 ); 12n + 6 = O(n); 3n2 + 2n + 6 = O(n); and 8n4 + 9n2 = O(n3 ).

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1-11

In asymptotic complexity analysis, we determine the biggest term in the complexity; the coeﬃcient of this biggest term is set to 1. The unit terms of a step-count function are step-count terms with their coeﬃcients changed to 1. For example, the unit terms of 3n2 + 6n log n + 7n + 5 are n2 , n log n, n, and 1; the biggest unit term is n2 . So when the step count of a program is 3n2 + 6n log n + 7n + 5, we say that its asymptotic complexity is O(n2 ). Notice that f (n) = O(g(n)) is not the same as O(g(n)) = f (n). In fact, saying that O(g(n)) = f (n) is meaningless. The use of the symbol = is unfortunate, as this symbol commonly denotes the equals relation. We can avoid some of the confusion that results from the use of this symbol (which is standard terminology) by reading the symbol = as “is” and not as “equals.”

1.5.2

Omega (Ω) and Theta (Θ) Notations

Although the big oh notation is the most frequently used asymptotic notation, the omega and theta notations are sometimes used to describe the asymptotic complexity of a program. The notation f (n) = Ω(g(n)) (read as “f (n) is omega of g(n)”) means that f (n) is asymptotically bigger than or equal to g(n). Therefore, in an asymptotic sense, g(n) is a lower bound for f (n). The notation f (n) = Θ(g(n)) (read as “f (n) is theta of g(n)”) means that f (n) is asymptotically equal to g(n). Example 1.8

10n + 7 = Ω(n) because 10n + 7 is asymptotically equal to n; 100n3 − 3 = Ω(n3 ); 12n + 6 = Ω(n); 3n3 +2n+6 = Ω(n); 8n4 +9n2 = Ω(n3 ); 3n3 +2n+6 = Ω(n5 ); and 8n4 +9n2 = Ω(n5 ). 10n + 7 = Θ(n) because 10n + 7 is asymptotically equal to n; 100n3 − 3 = Θ(n3 ); 12n + 6 = Θ(n); 3n3 + 2n + 6 = Θ(n); 8n4 + 9n2 = Θ(n3 ); 3n3 + 2n + 6 = Θ(n5 ); and 8n4 + 9n2 = Θ(n5 ). The best-case step count for sequentialSearch (Figure 1.3) is 4 (Table 1.1), the worstcase step count is n+3, and the average step count is 0.6n+3.4. So the best-case asymptotic complexity of sequentialSearch is Θ(1), and the worst-case and average complexities are Θ(n). It is also correct to say that the complexity of sequentialSearch is Ω(1) and O(n) because 1 is a lower bound (in an asymptotic sense) and n is an upper bound (in an asymptotic sense) on the step count. When using the Ω notation, it is customary to use, for g(n), the largest unit term for which the statement f (n) = Ω(g(n)) is true. At times it is useful to interpret O(g(n)), Ω(g(n)), and Θ(g(n)) as being the following sets: O(g(n)) = {f (n)|f (n) = O(g(n))} Ω(g(n)) = {f (n)|f (n) = Ω(g(n))} Θ(g(n)) = {f (n)|f (n) = Θ(g(n))} Under this interpretation, statements such as O(g1 (n)) = O(g2 (n)) and Θ(g1 (n)) = Θ(g2 (n)) are meaningful. When using this interpretation, it is also convenient to read f (n) = O(g(n)) as “f of n is in (or is a member of) big oh of g of n” and so on.

© 2005 by Chapman & Hall/CRC

1-12

1.5.3

Handbook of Data Structures and Applications

Little Oh Notation (o)

The little oh notation describes a strict upper bound on the asymptotic growth rate of the function f . f (n) is little oh of g(n) iﬀ f (n) is asymptotically smaller than g(n). Equivalently, f (n) = o(g(n)) (read as “f of n is little oh of g of n”) iﬀ f (n) = O(g(n)) and f (n) = Ω(g(n)). Example 1.9

[Little oh] 3n + 2 = o(n2 ) as 3n + 2 = O(n2 ) and 3n + 2 = Ω(n2 ). However, 3n + 2 = o(n). Similarly, 10n2 + 4n + 2 = o(n3 ), but is not o(n2 ). The little oh notation is often used in step-count analyses. A step count of 3n + o(n) would mean that the step count is 3n plus terms that are asymptotically smaller than n. When performing such an analysis, one can ignore portions of the program that are known to contribute less than Θ(n) steps.

1.6

Recurrence Equations

Recurrence equations arise frequently in the analysis of algorithms, particularly in the analysis of recursive as well as divide-and-conquer algorithms. Example 1.10

[Binary Search] Consider a binary search of the sorted array a[l : r], where n = r − l + 1 ≥ 0, for the element x. When n = 0, the search is unsuccessful and when n = 1, we compare x and a[l]. When n > 1, we compare x with the element a[m] (m = (l + r)/2) in the middle of the array. If the compared elements are equal, the search terminates; if x < a[m], we search a[l : m − 1]; otherwise, we search a[m + 1 : r]. Let t(n) be the worst-case complexity of binary search. Assuming that t(0) = t(1), we obtain the following recurrence. t(1) n≤1 t(n) = (1.3) t(n/2) + c n > 1 where c is a constant. Example 1.11

[Merge Sort] In a merge sort of a[0 : n − 1], n ≥ 1, we consider two cases. When n = 1, no work is to be done as a one-element array is always in sorted order. When n > 1, we divide a into two parts of roughly the same size, sort these two parts using the merge sort method recursively, then ﬁnally merge the sorted parts to obtain the desired sorted array. Since the time to do the ﬁnal merge is Θ(n) and the dividing into two roughly equal parts takes O(1) time, the complexity, t(n), of merge sort is given by the recurrence: t(1) n=1 t(n) = (1.4) t(n/2) + t(n/2) + cn n > 1 where c is a constant. Solving recurrence equations such as Equations 1.3 and 1.4 for t(n) is complicated by the presence of the ﬂoor and ceiling functions. By making an appropriate assumption on the permissible values of n, these functions may be eliminated to obtain a simpliﬁed recurrence.

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1-13

In the case of Equations 1.3 and 1.4 an assumption such as n is a power of 2 results in the simpliﬁed recurrences: t(1) n≤1 t(n) = (1.5) t(n/2) + c n > 1

and t(n) =

t(1) 2t(n/2) + cn

n=1 n>1

(1.6)

Several techniques—substitution, table lookup, induction, characteristic roots, and generating functions—are available to solve recurrence equations. We describe only the substitution and table lookup methods.

1.6.1

Substitution Method

In the substitution method, recurrences such as Equations 1.5 and 1.6 are solved by repeatedly substituting right-side occurrences (occurrences to the right of =) of t(x), x > 1, with expressions involving t(y), y < x. The substitution process terminates when the only occurrences of t(x) that remain on the right side have x = 1. Consider the binary search recurrence of Equation 1.5. Repeatedly substituting for t() on the right side, we get t(n) = =

t(n/2) + c (t(n/4) + c) + c

= = .. .

t(n/4) + 2c t(n/8) + 3c

= =

t(1) + c log2 n Θ(log n)

For the merge sort recurrence of Equation 1.6, we get t(n)

= 2t(n/2) + cn = 2(2t(n/4) + cn/2) + cn = 4t(n/4) + 2cn = 4(2t(n/8) + cn/4) + 2cn = 8t(n/8) + 3cn .. . = nt(1) + cn log2 n = Θ(n log n)

1.6.2

Table-Lookup Method

The complexity of many divide-and-conquer algorithms is given by a recurrence of the form t(1) n=1 t(n) = (1.7) a ∗ t(n/b) + g(n) n > 1

© 2005 by Chapman & Hall/CRC

1-14

Handbook of Data Structures and Applications h(n) O(1)

Θ((log n)i ), i ≥ 0

Θ(((log n)i+1 )/(i + 1))

r

Ω(n ), r > 0

TABLE 1.4

f (n)

O(nr ), r < 0

Θ(h(n))

f (n) values for various h(n) values

where a and b are known constants. The merge sort recurrence, Equation 1.6, is in this form. Although the recurrence for binary search, Equation 1.5, isn’t exactly in this form, the n ≤ 1 may be changed to n = 1 by eliminating the case n = 0. To solve Equation 1.7, we assume that t(1) is known and that n is a power of b (i.e., n = bk ). Using the substitution method, we can show that t(n) = nlogb a [t(1) + f (n)]

(1.8)

k

where f (n) = j=1 h(bj ) and h(n) = g(n)/nlogb a . Table 1.4 tabulates the asymptotic value of f (n) for various values of h(n). This table allows us to easily obtain the asymptotic value of t(n) for many of the recurrences we encounter when analyzing divide-and-conquer algorithms. Let us solve the binary search and merge sort recurrences using this table. Comparing Equation 1.5 with n ≤ 1 replaced by n = 1 with Equation 1.7, we see that a = 1, b = 2, and g(n) = c. Therefore, logb (a) = 0, and h(n) = g(n)/nlogb a = c = c(log n)0 = Θ((log n)0 ). From Table 1.4, we obtain f (n) = Θ(log n). Therefore, t(n) = nlogb a (c + Θ(log n)) = Θ(log n). For the merge sort recurrence, Equation 1.6, we obtain a = 2, b = 2, and g(n) = cn. So logb a = 1 and h(n) = g(n)/n = c = Θ((log n)0 ). Hence f (n) = Θ(log n) and t(n) = n(t(1) + Θ(log n)) = Θ(n log n).

1.7 1.7.1

Amortized Complexity What is Amortized Complexity?

The complexity of an algorithm or of an operation such as an insert, search, or delete, as deﬁned in Section 1.1, is the actual complexity of the algorithm or operation. The actual complexity of an operation is determined by the step count for that operation, and the actual complexity of a sequence of operations is determined by the step count for that sequence. The actual complexity of a sequence of operations may be determined by adding together the step counts for the individual operations in the sequence. Typically, determining the step count for each operation in the sequence is quite diﬃcult, and instead, we obtain an upper bound on the step count for the sequence by adding together the worst-case step count for each operation. When determining the complexity of a sequence of operations, we can, at times, obtain tighter bounds using amortized complexity rather than worst-case complexity. Unlike the actual and worst-case complexities of an operation which are closely related to the step count for that operation, the amortized complexity of an operation is an accounting artifact that often bears no direct relationship to the actual complexity of that operation. The amortized complexity of an operation could be anything. The only requirement is that the

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1-15

sum of the amortized complexities of all operations in the sequence be greater than or equal to the sum of the actual complexities. That is

amortized(i) ≥

1≤i≤n

actual(i)

(1.9)

1≤i≤n

where amortized(i) and actual(i), respectively, denote the amortized and actual complexities of the ith operation in a sequence of n operations. Because of this requirement on the sum of the amortized complexities of the operations in any sequence of operations, we may use the sum of the amortized complexities as an upper bound on the complexity of any sequence of operations. You may view the amortized cost of an operation as being the amount you charge the operation rather than the amount the operation costs. You can charge an operation any amount you wish so long as the amount charged to all operations in the sequence is at least equal to the actual cost of the operation sequence. Relative to the actual and amortized costs of each operation in a sequence of n operations, we deﬁne a potential function P (i) as below P (i) = amortized(i) − actual(i) + P (i − 1)

(1.10)

That is, the ith operation causes the potential function to change by the diﬀerence between the amortized and actual costs of that operation. If we sum Equation 1.10 for 1 ≤ i ≤ n, we get P (i) = (amortized(i) − actual(i) + P (i − 1)) 1≤i≤n

1≤i≤n

or

(P (i) − P (i − 1)) =

1≤i≤n

(amortized(i) − actual(i))

1≤i≤n

or P (n) − P (0) =

(amortized(i) − actual(i))

1≤i≤n

From Equation 1.9, it follows that P (n) − P (0) ≥ 0

(1.11)

When P (0) = 0, the potential P (i) is the amount by which the ﬁrst i operations have been overcharged (i.e., they have been charged more than their actual cost). Generally, when we analyze the complexity of a sequence of n operations, n can be any nonnegative integer. Therefore, Equation 1.11 must hold for all nonnegative integers. The preceding discussion leads us to the following three methods to arrive at amortized costs for operations: 1. Aggregate Method In the aggregate method, we determine an upper bound for the sum of the actual costs of the n operations. The amortized cost of each operation is set equal to this upper bound divided by n. You may verify that this assignment of amortized costs satisﬁes Equation 1.9 and is, therefore, valid.

© 2005 by Chapman & Hall/CRC

1-16

Handbook of Data Structures and Applications

2. Accounting Method In this method, we assign amortized costs to the operations (probably by guessing what assignment will work), compute the P (i)s using Equation 1.10, and show that P (n) − P (0) ≥ 0. 3. Potential Method Here, we start with a potential function (probably obtained using good guess work) that satisﬁes Equation 1.11 and compute the amortized complexities using Equation 1.10.

1.7.2

Maintenance Contract

Problem Deﬁnition

In January, you buy a new car from a dealer who oﬀers you the following maintenance contract: $50 each month other than March, June, September and December (this covers an oil change and general inspection), $100 every March, June, and September (this covers an oil change, a minor tune-up, and a general inspection), and $200 every December (this covers an oil change, a major tune-up, and a general inspection). We are to obtain an upper bound on the cost of this maintenance contract as a function of the number of months. Worst-Case Method

We can bound the contract cost for the ﬁrst n months by taking the product of n and the maximum cost incurred in any month (i.e., $200). This would be analogous to the traditional way to estimate the complexity–take the product of the number of operations and the worst-case complexity of an operation. Using this approach, we get $200n as an upper bound on the contract cost. The upper bound is correct because the actual cost for n months does not exceed $200n. Aggregate Method

To use the aggregate method for amortized complexity, we ﬁrst determine an upper bound on the sum of the costs for the ﬁrst n months. As tight a bound as is possible is desired. The sum of the actual monthly costs of the contract for the ﬁrst n months is 200 ∗ n/12 + =

100 ∗ (n/3 − n/12) + 50 ∗ (n − n/3) 100 ∗ n/12 + 50 ∗ n/3 + 50 ∗ n

≤ =

100 ∗ n/12 + 50 ∗ n/3 + 50 ∗ n 50n(1/6 + 1/3 + 1)

= =

50n(3/2) 75n

The amortized cost for each month is set to $75. Table 1.5 shows the actual costs, the amortized costs, and the potential function value (assuming P (0) = 0) for the ﬁrst 16 months of the contract. Notice that some months are charged more than their actual costs and others are charged less than their actual cost. The cumulative diﬀerence between what the operations are charged and their actual costs is given by the potential function. The potential function satisﬁes Equation 1.11 for all values of n. When we use the amortized cost of $75 per month, we get $75n as an upper bound on the contract cost for n months. This bound is tighter than the bound of $200n obtained using the worst-case monthly cost.

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms month actual cost amortized cost P()

TABLE 1.5

1 50 75 25

2 50 75 50

1-17 3 100 75 25

4 50 75 50

5 50 75 75

6 100 75 50

7 50 75 75

8 50 75 100

9 100 75 75

10 50 75 100

11 50 75 125

12 200 75 0

13 50 75 25

14 50 75 50

15 100 75 25

Maintenance contract

Accounting Method

When we use the accounting method, we must ﬁrst assign an amortized cost for each month and then show that this assignment satisﬁes Equation 1.11. We have the option to assign a diﬀerent amortized cost to each month. In our maintenance contract example, we know the actual cost by month and could use this actual cost as the amortized cost. It is, however, easier to work with an equal cost assignment for each month. Later, we shall see examples of operation sequences that consist of two or more types of operations (for example, when dealing with lists of elements, the operation sequence may be made up of search, insert, and remove operations). When dealing with such sequences we often assign a diﬀerent amortized cost to operations of diﬀerent types (however, operations of the same type have the same amortized cost). To get the best upper bound on the sum of the actual costs, we must set the amortized monthly cost to be the smallest number for which Equation 1.11 is satisﬁed for all n. From the above table, we see that using any cost less than $75 will result in P (n) − P (0) < 0 for some values of n. Therefore, the smallest assignable amortized cost consistent with Equation 1.11 is $75. Generally, when the accounting method is used, we have not computed the aggregate cost. Therefore, we would not know that $75 is the least assignable amortized cost. So we start by assigning an amortized cost (obtained by making an educated guess) to each of the diﬀerent operation types and then proceed to show that this assignment of amortized costs satisﬁes Equation 1.11. Once we have shown this, we can obtain an upper bound on the cost of any operation sequence by computing

f (i) ∗ amortized(i)

1≤i≤k

where k is the number of diﬀerent operation types and f (i) is the frequency of operation type i (i.e., the number of times operations of this type occur in the operation sequence). For our maintenance contract example, we might try an amortized cost of $70. When we use this amortized cost, we discover that Equation 1.11 is not satisﬁed for n = 12 (for example) and so $70 is an invalid amortized cost assignment. We might next try $80. By constructing a table such as the one above, we will observe that Equation 1.11 is satisﬁed for all months in the ﬁrst 12 month cycle, and then conclude that the equation is satisﬁed for all n. Now, we can use $80n as an upper bound on the contract cost for n months. Potential Method

We ﬁrst deﬁne a potential function for the analysis. The only guideline you have in deﬁning this function is that the potential function represents the cumulative diﬀerence between the amortized and actual costs. So, if you have an amortized cost in mind, you may be able to use this knowledge to develop a potential function that satisﬁes Equation 1.11, and then use the potential function and the actual operation costs (or an upper bound on these actual costs) to verify the amortized costs. If we are extremely experienced, we might start with the potential function

© 2005 by Chapman & Hall/CRC

16 50 75 50

1-18

Handbook of Data Structures and Applications

⎧ 0 ⎪ ⎪ ⎪ ⎪ 25 ⎪ ⎪ ⎨ 50 t(n) = 75 ⎪ ⎪ ⎪ ⎪ ⎪ 100 ⎪ ⎩ 125

n n n n n n

mod mod mod mod mod mod

12 = 0 12 = 1 or 3 12 = 2, 4, or 6 12 = 5, 7, or 9 12 = 8 or 10 12 = 11

Without the aid of the table (Table 1.5) constructed for the aggregate method, it would take quite some ingenuity to come up with this potential function. Having formulated a potential function and veriﬁed that this potential function satisﬁes Equation 1.11 for all n, we proceed to use Equation 1.10 to determine the amortized costs. From Equation 1.10, we obtain amortized(i) = actual(i) + P (i) − P (i − 1). Therefore, amortized(1) =

actual(1) + P (1) − P (0) = 50 + 25 − 0 = 75

amortized(2) = amortized(3) =

actual(2) + P (2) − P (1) = 50 + 50 − 25 = 75 actual(3) + P (3) − P (2) = 100 + 25 − 50 = 75

and so on. Therefore, the amortized cost for each month is $75. So, the actual cost for n months is at most $75n.

1.7.3

The McWidget Company

Problem Deﬁnition

The famous McWidget company manufactures widgets. At its headquarters, the company has a large display that shows how many widgets have been manufactured so far. Each time a widget is manufactured, a maintenance person updates this display. The cost for this update is $c + dm, where c is a ﬁxed trip charge, d is a charge per display digit that is to be changed, and m is the number of digits that are to be changed. For example, when the display is changed from 1399 to 1400, the cost to the company is $c + 3d because 3 digits must be changed. The McWidget company wishes to amortize the cost of maintaining the display over the widgets that are manufactured, charging the same amount to each widget. More precisely, we are looking for an amount $e = amortized(i) that should levied against each widget so that the sum of these charges equals or exceeds the actual cost of maintaining/updating the display ($e ∗ n ≥ actual total cost incurred for ﬁrst n widgets for all n ≥ 1). To keep the overall selling price of a widget low, we wish to ﬁnd as small an e as possible. Clearly, e > c + d because each time a widget is made, at least one digit (the least signiﬁcant one) has to be changed. Worst-Case Method

This method does not work well in this application because there is no ﬁnite worst-case cost for a single display update. As more and more widgets are manufactured, the number of digits that need to be changed increases. For example, when the 1000th widget is made, 4 digits are to be changed incurring a cost of c + 4d, and when the 1,000,000th widget is made, 7 digits are to be changed incurring a cost of c + 7d. If we use the worst-case method, the amortized cost to each widget becomes inﬁnity.

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1-19

widget actual cost amortized cost— P()

1 1 1.12 0.12

2 1 1.12 0.24

3 1 1.12 0.36

4 1 1.12 0.48

5 1 1.12 0.60

6 1 1.12 0.72

7 1 1.12 0.84

8 1 1.12 0.96

9 1 1.12 1.08

10 2 1.12 0.20

11 1 1.12 0.32

12 1 1.12 0.44

13 1 1.12 0.56

14 1 1.12 0.68

widget actual cost amortized cost— P()

15 1 1.12 0.80

16 1 1.12 0.92

17 1 1.12 1.04

18 1 1.12 1.16

19 1 1.12 1.28

20 2 1.12 0.40

21 1 1.12 0.52

22 1 1.12 0.64

23 1 1.12 0.76

24 1 1.12 0.88

25 1 1.12 1.00

26 1 1.12 1.12

27 1 1.12 1.24

28 1 1.12 1.36

TABLE 1.6

Data for widgets

Aggregate Method

Let n be the number of widgets made so far. As noted earlier, the least signiﬁcant digit of the display has been changed n times. The digit in the ten’s place changes once for every ten widgets made, that in the hundred’s place changes once for every hundred widgets made, that in the thousand’s place changes once for every thousand widgets made, and so on. Therefore, the aggregate number of digits that have changed is bounded by n(1 + 1/10 + 1/100 + 1/1000 + ...) = (1.11111...)n So, the amortized cost of updating the display is $c + d(1.11111...)n/n < c + 1.12d. If the McWidget company adds $c+ 1.12d to the selling price of each widget, it will collect enough money to pay for the cost of maintaining the display. Each widget is charged the cost of changing 1.12 digits regardless of the number of digits that are actually changed. Table 1.6 shows the actual cost, as measured by the number of digits that change, of maintaining the display, the amortized cost (i.e., 1.12 digits per widget), and the potential function. The potential function gives the diﬀerence between the sum of the amortized costs and the sum of the actual costs. Notice how the potential function builds up so that when it comes time to pay for changing two digits, the previous potential function value plus the current amortized cost exceeds 2. From our derivation of the amortized cost, it follows that the potential function is always nonnegative. Accounting Method

We begin by assigning an amortized cost to the individual operations, and then we show that these assigned costs satisfy Equation 1.11. Having already done an amortized analysis using the aggregate method, we see that Equation 1.11 is satisﬁed when we assign an amortized cost of $c + 1.12d to each display change. Typically, however, the use of the accounting method is not preceded by an application of the aggregate method and we start by guessing an amortized cost and then showing that this guess satisﬁes Equation 1.11. Suppose we assign a guessed amortized cost of $c + 2d for each display change. P (n) − P (0) =

(amortized(i) − actual(i))

1≤i≤n

=

(c + 2d)n −

actual(i)

1≤i≤n

= ≥

(c + 2d)n − (c + (1 + 1/10 + 1/100 + ...)d)n (c + 2d)n − (c + 1.12d)n

≥

0

This analysis also shows us that we can reduce the amortized cost of a widget to $c+1.12d.

© 2005 by Chapman & Hall/CRC

1-20

Handbook of Data Structures and Applications

An alternative proof method that is useful in some analyses involves distributing the excess charge P (i) − P (0) over various accounting entities, and using these stored excess charges (called credits) to establish P (i + 1) − P (0) ≥ 0. For our McWidget example, we use the display digits as the accounting entities. Initially, each digit is 0 and each digit has a credit of 0 dollars. Suppose we have guessed an amortized cost of $c + (1.111...)d. When the ﬁrst widget is manufactured, $c + d of the amortized cost is used to pay for the update of the display and the remaining $(0.111...)d of the amortized cost is retained as a credit by the least signiﬁcant digit of the display. Similarly, when the second through ninth widgets are manufactured, $c + d of the amortized cost is used to pay for the update of the display and the remaining $(0.111...)d of the amortized cost is retained as a credit by the least signiﬁcant digit of the display. Following the manufacture of the ninth widget, the least signiﬁcant digit of the display has a credit of $(0.999...)d and the remaining digits have no credit. When the tenth widget is manufactured, $c + d of the amortized cost are used to pay for the trip charge and the cost of changing the least signiﬁcant digit. The least signiﬁcant digit now has a credit of $(1.111...)d. Of this credit, $d are used to pay for the change of the next least signiﬁcant digit (i.e., the digit in the ten’s place), and the remaining $(0.111...)d are transferred to the ten’s digit as a credit. Continuing in this way, we see that when the display shows 99, the credit on the ten’s digit is $(0.999...)d and that on the one’s digit (i.e., the least signiﬁcant digit) is also $(0.999...)d. When the 100th widget is manufactured, $c + d of the amortized cost are used to pay for the trip charge and the cost of changing the least signiﬁcant digit, and the credit on the least signiﬁcant digit becomes $(1.111...)d. Of this credit, $d are used to pay for the change of the ten’s digit from 9 to 0, the remaining $(0.111...)d credit on the one’s digit is transferred to the ten’s digit. The credit on the ten’s digit now becomes $(1.111...)d. Of this credit, $d are used to pay for the change of the hundred’s digit from 0 to 1, the remaining $(0.111...)d credit on the ten’s digit is transferred to the hundred’s digit. The above accounting scheme ensures that the credit on each digit of the display always equals $(0.111...)dv, where v is the value of the digit (e.g., when the display is 206 the credit on the one’s digit is $(0.666...)d, the credit on the ten’s digit is $0, and that on the hundred’s digit is $(0.222...)d. From the preceding discussion, it follows that P (n) − P (0) equals the sum of the digit credits and this sum is always nonnegative. Therefore, Equation 1.11 holds for all n. Potential Method

We ﬁrst postulate a potential function that satisﬁes Equation 1.11, and then use this function to obtain the amortized costs. From the alternative proof used above for the accounting method, we can see that we should use the potential function P (n) = (0.111...)d i vi , where vi is the value of the ith digit of the display. For example, when the display shows 206 (at this time n = 206), the potential function value is (0.888...)d. This potential function satisﬁes Equation 1.11. Let q be the number of 9s at the right end of j (i.e., when j = 12903999, q = 3). When the display changes from j to j + 1, the potential change is (0.111...)d(1 − 9q) and the actual cost of updating the display is $c + (q + 1)d. From Equation 1.10, it follows that the amortized cost for the display change is

actual cost + potential change = c + (q + 1)d + (0.111...)d(1 − 9q) = c + (1.111...)d

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1.7.4

1-21

Subset Generation

Problem Deﬁnition

The subsets of a set of n elements are deﬁned by the 2n vectors x[1 : n], where each x[i] is either 0 or 1. x[i] = 1 iﬀ the ith element of the set is a member of the subset. The subsets of a set of three elements are given by the eight vectors 000, 001, 010, 011, 100, 101, 110, and 111, for example. Starting with an array x[1 : n] has been initialized to zeroes (this represents the empty subset), each invocation of algorithm nextSubset (Figure 1.10) returns the next subset. When all subsets have been generated, this algorithm returns null. public int [] nextSubset() {// return next subset; return null if no next subset // generate next subset by adding 1 to the binary number x[1:n] int i = n; while (i > 0 && x[i] == 1) {x[i] = 0; i--;} if (i == 0) return null; else {x[i] = 1; return x;} } FIGURE 1.10: Subset enumerator. We wish to determine how much time it takes to generate the ﬁrst m, 1 ≤ m ≤ 2n subsets. This is the time for the ﬁrst m invocations of nextSubset. Worst-Case Method

The complexity of nextSubset is Θ(c), where c is the number of x[i]s that change. Since all n of the x[i]s could change in a single invocation of nextSubset, the worst-case complexity of nextSubset is Θ(n). Using the worst-case method, the time required to generate the ﬁrst m subsets is O(mn). Aggregate Method

The complexity of nextSubset equals the number of x[i]s that change. When nextSubset is invoked m times, x[n] changes m times; x[n − 1] changes m/2 times; x[n − 2] changes m/4 times; x[n−3] changes m/8 times; and so on. Therefore, the sum of the actual costs of the ﬁrst m invocations is 0≤i≤log2 m (m/2i ) < 2m. So, the complexity of generating the ﬁrst m subsets is actually O(m), a tighter bound than obtained using the worst-case method. The amortized complexity of nextSubset is (sum of actual costs)/m < 2m/m = O(1). Accounting Method

We ﬁrst guess the amortized complexity of nextSubset, and then show that this amortized complexity satisﬁes Equation 1.11. Suppose we guess that the amortized complexity is 2. To verify this guess, we must show that P (m) − P (0) ≥ 0 for all m. We shall use the alternative proof method used in the McWidget example. In this method, we distribute the excess charge P (i) − P (0) over various accounting entities, and use these

© 2005 by Chapman & Hall/CRC

1-22

Handbook of Data Structures and Applications

stored excess charges to establish P (i + 1) − P (0) ≥ 0. We use the x[j]s as the accounting entities. Initially, each x[j] is 0 and has a credit of 0. When the ﬁrst subset is generated, 1 unit of the amortized cost is used to pay for the single x[j] that changes and the remaining 1 unit of the amortized cost is retained as a credit by x[n], which is the x[j] that has changed to 1. When the second subset is generated, the credit on x[n] is used to pay for changing x[n] to 0 in the while loop, 1 unit of the amortized cost is used to pay for changing x[n−1] to 1, and the remaining 1 unit of the amortized cost is retained as a credit by x[n − 1], which is the x[j] that has changed to 1. When the third subset is generated, 1 unit of the amortized cost is used to pay for changing x[n] to 1, and the remaining 1 unit of the amortized cost is retained as a credit by x[n], which is the x[j] that has changed to 1. When the fourth subset is generated, the credit on x[n] is used to pay for changing x[n] to 0 in the while loop, the credit on x[n − 1] is used to pay for changing x[n − 1] to 0 in the while loop, 1 unit of the amortized cost is used to pay for changing x[n − 2] to 1, and the remaining 1 unit of the amortized cost is retained as a credit by x[n − 2], which is the x[j] that has changed to 1. Continuing in this way, we see that each x[j] that is 1 has a credit of 1 unit on it. This credit is used to pay the actual cost of changing this x[j] from 1 to 0 in the while loop. One unit of the amortized cost of nextSubset is used to pay for the actual cost of changing an x[j] to 1 in the else clause, and the remaining one unit of the amortized cost is retained as a credit by this x[j]. The above accounting scheme ensures that the credit on each x[j] that is 1 is exactly 1, and the credit on each x[j] that is 0 is 0. From the preceding discussion, it follows that P (m) − P (0) equals the number of x[j]s that are 1. Since this number is always nonnegative, Equation 1.11 holds for all m. Having established that the amortized complexity of nextSubset is 2 = O(1), we conclude that the complexity of generating the ﬁrst m subsets equals m ∗ amortized complexity = O(m). Potential Method

We ﬁrst postulate a potential function that satisﬁes Equation 1.11, and then use this function to obtain the amortized costs. Let P (j) be the potential just after the jth subset is generated. From the proof used above for the accounting method, we can see that we should deﬁne P (j) to be equal to the number of x[i]s in the jth subset that are equal to 1. By deﬁnition, the 0th subset has all x[i] equal to 0. Since P (0) = 0 and P (j) ≥ 0 for all j, this potential function P satisﬁes Equation 1.11. Consider any subset x[1 : n]. Let q be the number of 1s at the right end of x[] (i.e., x[n], x[n − 1], · · · , x[n − q + 1], are all 1s). Assume that there is a next subset. When the next subset is generated, the potential change is 1 − q because q 1s are replaced by 0 in the while loop and a 0 is replaced by a 1 in the else clause. The actual cost of generating the next subset is q + 1. From Equation 1.10, it follows that, when there is a next subset, the amortized cost for nextSubset is actual cost + potential change = q + 1 + 1 − q = 2 When there is no next subset, the potential change is −q and the actual cost of nextSubset is q. From Equation 1.10, it follows that, when there is no next subset, the amortized cost for nextSubset is actual cost + potential change = q − q = 0 Therefore, we can use 2 as the amortized complexity of nextSubset. Consequently, the actual cost of generating the ﬁrst m subsets is O(m).

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

1.8

1-23

Practical Complexities

We have seen that the time complexity of a program is generally some function of the problem size. This function is very useful in determining how the time requirements vary as the problem size changes. For example, the run time of an algorithm whose complexity is Θ(n2 ) is expected to increase by a factor of 4 when the problem size doubles and by a factor of 9 when the problem size triples. The complexity function also may be used to compare two algorithms P and Q that perform the same task. Assume that algorithm P has complexity Θ(n) and that algorithm Q has complexity Θ(n2 ). We can assert that algorithm P is faster than algorithm Q for “suﬃciently large” n. To see the validity of this assertion, observe that the actual computing time of P is bounded from above by cn for some constant c and for all n, n ≥ n1 , while that of Q is bounded from below by dn2 for some constant d and all n, n ≥ n2 . Since cn ≤ dn2 for n ≥ c/d, algorithm P is faster than algorithm Q whenever n ≥ max{n1 , n2 , c/d}. One should always be cautiously aware of the presence of the phrase suﬃciently large in the assertion of the preceding discussion. When deciding which of the two algorithms to use, we must know whether the n we are dealing with is, in fact, suﬃciently large. If algorithm P actually runs in 106 n milliseconds while algorithm Q runs in n2 milliseconds and if we always have n ≤ 106 , then algorithm Q is the one to use. To get a feel for how the various functions grow with n, you should study Figures 1.11 and 1.12 very closely. These ﬁgures show that 2n grows very rapidly with n. In fact, if a algorithm needs 2n steps for execution, then when n = 40, the number of steps needed is approximately 1.1 ∗ 1012 . On a computer performing 1,000,000,000 steps per second, this algorithm would require about 18.3 minutes. If n = 50, the same algorithm would run for about 13 days on this computer. When n = 60, about 310.56 years will be required to execute the algorithm, and when n = 100, about 4 ∗ 1013 years will be needed. We can conclude that the utility of algorithms with exponential complexity is limited to small n (typically n ≤ 40).

log n 0 1 2 3 4 5

n 1 2 4 8 16 32

n log n 0 2 8 24 64 160

n2 1 4 16 64 256 1024

n3 1 8 64 512 4096 32,768

2n 2 4 16 256 65,536 4,294,967,296

FIGURE 1.11: Value of various functions. Algorithms that have a complexity that is a high-degree polynomial are also of limited utility. For example, if an algorithm needs n10 steps, then our 1,000,000,000 steps per second computer needs 10 seconds when n = 10; 3171 years when n = 100; and 3.17 ∗ 1013 years when n = 1000. If the algorithm’s complexity had been n3 steps instead, then the computer would need 1 second when n = 1000, 110.67 minutes when n = 10,000, and 11.57 days when n = 100,000. Figure 1.13 gives the time that a 1,000,000,000 instructions per second computer needs to execute an algorithm of complexity f (n) instructions. One should note that currently only the fastest computers can execute about 1,000,000,000 instructions per second. From a

© 2005 by Chapman & Hall/CRC

1-24

Handbook of Data Structures and Applications n2

2n 60

50

40 nlogn 30 f 20

n

10

logn 0

0

1

2

3

4 n

5

6

7

8

9

10

FIGURE 1.12: Plot of various functions. practical standpoint, it is evident that for reasonably large n (say n > 100) only algorithms of small complexity (such as n, n log n, n2 , and n3 ) are feasible. Further, this is the case even if we could build a computer capable of executing 1012 instructions per second. In this case the computing times of Figure 1.13 would decrease by a factor of 1000. Now when n = 100, it would take 3.17 years to execute n10 instructions and 4 ∗ 1010 years to execute 2n instructions.

n 10 20 30 40 50 100 103 104 105 106

n .01 µs .02 µs .03 µs .04 µs .05 µs .10 µs 1 µs 10 µs 100 µs 1 ms

n log2 n .03 µs .09 µs .15 µs .21 µs .28 µs .66 µs 9.96 µs 130 µs 1.66 ms 19.92 ms

n2 .1 µs .4 µs .9 µs 1.6 µs 2.5 µs 10 µs 1 ms 100 ms 10 s 16.67 m

n3 1 µs 8 µs 27 µs 64 µs 125 µs 1 ms 1s 16.67 m 11.57 d 31.71 y

f (n)

n4 10 µs 160 µs 810 µs 2.56 ms 6.25 ms 100 ms 16.67 m 115.7 d 3171 y 3.17 ∗ 107 y

n10 10 s 2.84 h 6.83 d 121 d 3.1 y 3171 y 3.17 ∗ 1013 y 3.17 ∗ 1023 y 3.17 ∗ 1033 y 3.17 ∗ 1043 y

2n 1 µs 1 ms 1s 18 m 13 d 4 ∗ 1013 y 32 ∗ 10283 y

µs = microsecond = 10−6 seconds; ms = milliseconds = 10−3 seconds s = seconds; m = minutes; h = hours; d = days; y = years FIGURE 1.13: Run times on a 1,000,000,000 instructions per second computer.

Acknowledgment This work was supported, in part, by the National Science Foundation under grant CCR9912395.

© 2005 by Chapman & Hall/CRC

Analysis of Algorithms

References [1] T. Cormen, C. Leiserson, and R. Rivest, Introduction to Algorithms, McGraw-Hill, New York, NY, 1992. [2] J. Hennessey and D. Patterson, Computer Organization and Design, Second Edition, Morgan Kaufmann Publishers, Inc., San Francisco, CA, 1998, Chapter 7. [3] E. Horowitz, S. Sahni, and S. Rajasekaran, Fundamentals of Computer Algorithms, W. H. Freeman and Co., New York, NY, l998. [4] G. Rawlins, Compared to What: An Introduction to the Analysis of Algorithms, W. H. Freeman and Co., New York, NY, 1992. [5] S. Sahni, Data Structures, Algorithms, and Applications in Java, McGraw-Hill, NY, 2000.

© 2005 by Chapman & Hall/CRC

1-25

2 Basic Structures 2.1 2.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operations on an Array • Sorted Arrays • Array Doubling • Multiple Lists in a Single Array • Heterogeneous Arrays • Multidimensional Arrays Sparse Matrices

2.3

2-1 2-1

•

Linked Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-7

Chains • Circular Lists • Doubly Linked Circular Lists • Generalized Lists

Dinesh P. Mehta Colorado School of Mines

2.1

2.4

Stacks and Queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stack Implementation

•

2-12

Queue Implementation

Introduction

In this chapter, we review several basic structures that are usually taught in a ﬁrst class on data structures. There are several text books that cover this material, some of which are listed here [1–4]. However, we believe that it is valuable to review this material for the following reasons: 1. In practice, these structures are used more often than all of the other data structures discussed in this handbook combined. 2. These structures are used as basic building blocks on which other more complicated structures are based. Our goal is to provide a crisp and brief review of these structures. For a more detailed explanation, the reader is referred to the text books listed at the end of this chapter. In the following, we assume that the reader is familiar with arrays and pointers.

2.2

Arrays

An array is conceptually deﬁned as a collection of pairs. The implementation of the array in modern programming languages such as C++ and Java uses indices starting at 0. Languages such as Pascal permitted one to deﬁne an array on an arbitrary range of integer indices. In most applications, the array is the most convenient method to store a collection of objects. In these cases, the index associated with a value is unimportant. For example, if an array city is being used to store a list of cities in no particular order, it doesn’t really matter whether city[0] is “Denver” or “Mumbai”. If, on the other hand, an array name is being used to store a list of student names in alphabetical order, then,

2-1

© 2005 by Chapman & Hall/CRC

2-2

Handbook of Data Structures and Applications

although the absolute index values don’t matter, the ordering of names associated with the ordering of the index does matter: i.e., name[i] must precede name[j] in alphabetical order, if i < j. Thus, one may distinguish between sorted arrays and unsorted arrays. Sometimes arrays are used so that the index does matter. For example, suppose we are trying to represent a histogram: we want to maintain a count of the number of students that got a certain score on an exam from a scale of 0 to 10. If score[5] = 7, this means that 7 students received a score of 5. In this situation, it is possible that the desired indices are not supported by the language. For example, C++ does not directly support using indices such as “blue”, “green”, and “red”. This may be rectiﬁed by using enumerated types to assign integer values to the indices. In cases when the objects in the array are large and unwieldy and have to be moved around from one array location to another, it may be advantageous to store pointers or references to objects in the array rather than the objects themselves. Programming languages provide a mechanism to retrieve the value associated with a supplied index or to associate a value with an index. Programming languages like C++ do not explicitly maintain the size of the array. Rather, it is the programmer’s responsibility to be aware of the array size. Further, C++ does not provide automatic range-checking. Again, it is the programmer’s responsibility to ensure that the index being supplied is valid. Arrays are usually allocated contiguous storage in the memory. An array may be allocated statically (i.e., during compile-time) or dynamically (i.e., during program execution). For example, in C++, a static array is deﬁned as: int list[20]; while a dynamic one is deﬁned as: int* list; . . list = new int[25]; An important diﬀerence between static and dynamic arrays is that the size of a static array cannot be changed during run time, while that of a dynamic array can (as we will see in Section 2.2.3).

2.2.1

Operations on an Array

1. Retrieval of an element: Given an array index, retrieve the corresponding value. This can be accomplished in O(1) time. This is an important advantage of the array relative to other structures. If the array is sorted, this enables one to compute the minimum, maximum, median (or in general, the ith smallest element) essentially for free in O(1) time. 2. Search: Given an element value, determine whether it is present in the array. If the array is unsorted, there is no good alternative to a sequential search that iterates through all of the elements in the array and stops when the desired element is found: int SequentialSearch(int* array, int n, int x) // search for x in array[n] { for (int i = 0; i < n; i++) if (array[i] == x) return i; // search succeeded

© 2005 by Chapman & Hall/CRC

Basic Structures

2-3

return -1; // search failed } In the worst case, this requires O(n) time. If, however, the array is sorted, binary search can be used. int BinarySearch(int* array, int n, int x) { int first = 0, mid, last = n-1; while (first < last) { mid = (first + last)/2; if (array[mid] == x) return mid; // search succeeded if (x < array[mid]) last = mid-1; else first = mid+1; } return -1; // search failed } Binary search only requires O(log n) time. 3. Insertion and Deletion: These operations can be the array’s Achilles heel. First, consider a sorted array. It is usually assumed that the array that results from an insertion or deletion is to be sorted. The worst case scenario presents itself when an element that is smaller than all of the elements currently in the array is to be inserted. This element will be placed in the leftmost location. However, to make room for it, all of the existing elements in the array will have to be shifted one place to the right. This requires O(n) time. Similarly, a deletion from the leftmost element leaves a “vacant” location. Actually, this location can never be vacant because it refers to a word in memory which must contain some value. Thus, if the program accesses a “vacant” location, it doesn’t have any way to know that the location is vacant. It may be possible to establish some sort of code based on our knowledge of the values contained in the array. For example, if it is known that an array contains only positive integers, then one could use a zero to denote a vacant location. Because of these and other complications, it is best to eliminate vacant locations that are interspersed among occupied locations by shifting elements to the left so that all vacant locations are placed to the right. In this case, we know which locations are vacant by maintaining an integer variable which contains the number of locations starting at the left that are currently in use. As before, this shifting requires O(n) time. In an unsorted array, the eﬃciency of insertion and deletion depends on where elements are to be added or removed. If it is known for example that insertion and deletion will only be performed at the right end of the array, then these operations take O(1) time as we will see later when we discuss stacks.

2.2.2

Sorted Arrays

We have already seen that there are several beneﬁts to using sorted arrays, namely: searching is faster, computing order statistics (the ith smallest element) is O(1), etc. This is the ﬁrst illustration of a key concept in data structures that will be seen several times in this handbook: the concept of preprocessing data to make subsequent queries eﬃcient. The idea is that we are often willing to invest some time at the beginning in setting up a data structure so that subsequent operations on it become faster. Some sorting algorithms such

© 2005 by Chapman & Hall/CRC

2-4

Handbook of Data Structures and Applications

as heap sort and merge sort require O(n log n) time in the worst case, whereas other simpler sorting algorithms such as insertion sort, bubble sort and selection sort require O(n2 ) time in the worst case. Others such as quick sort have a worst case time of O(n2 ), but require O(n log n) on the average. Radix sort requires Θ(n) time for certain kinds of data. We refer the reader to [5] for a detailed discussion. However, as we have seen earlier, insertion into and deletion from a sorted array can take Θ(n) time, which is large. It is possible to merge two sorted arrays into a single sorted array in time linear in the sum of their sizes. However, the usual implementation needs additional Θ(n) space. See [6] for an O(1)-space merge algorithm.

2.2.3

Array Doubling

To increase the length of a (dynamically allocated) one-dimensional array a that contains elements in positions a[0..n − 1], we ﬁrst deﬁne an array of the new length (say m), then copy the n elements from a to the new array, and ﬁnally change the value of a so that it references the new array. It takes Θ(m) time to create an array of length m because all elements of the newly created array are initialized to a default value. It then takes an additional Θ(n) time to copy elements from the source array to the destination array. Thus, the total time required for this operation is Θ(m + n). This operation is used in practice to increase the array size when it becomes full. The new array is usually twice the length of the original; i.e., m = 2n. The resulting complexity (Θ(n)) would normally be considered to be expensive. However, when this cost is amortized over the subsequent n insertions, it in fact only adds Θ(1) time per insertion. Since the cost of an insertion is Ω(1), this does not result in an asymptotic increase in insertion time. In general, increasing array size by a constant factor every time its size is to be increased does not adversely aﬀect the asymptotic complexity. A similar approach can be used to reduce the array size. Here, the array size would be reduced by a constant factor every time.

2.2.4

Multiple Lists in a Single Array

The array is wasteful of space when it is used to represent a list of objects that changes over time. In this scenario, we usually allocate a size greater than the number of objects that have to be stored, for example by using the array doubling idea discussed above. Consider a completely-ﬁlled array of length 8192 into which we are inserting an additional element. This insertion causes the array-doubling algorithm to create a new array of length 16,384 into which the 8192 elements are copied (and the new element inserted) before releasing the original array. This results in a space requirement during the operation which is almost three times the number of elements actually present. When several lists are to be stored, it is more eﬃcient to store them all in a single array rather than allocating one array for each list. Although this representation of multiple lists is more space-eﬃcient, insertions can be more expensive because it may be necessary to move elements belonging to other lists in addition to elements in one’s own list. This representation is also harder to implement.

1

2

3

4

5

List 1

10 11 12

25 26 27 28 29

List 2

List 3

FIGURE 2.1: Multiple lists in a single array.

© 2005 by Chapman & Hall/CRC

Basic Structures

2.2.5

2-5

Heterogeneous Arrays

The deﬁnition of an array in modern programming languages requires all of its elements to be of the same type. How do we then address the scenario where we wish to use the array to store elements of diﬀerent types? In earlier languages like C, one could use the union facility to artiﬁcially coalesce the diﬀerent types into one type. We could then deﬁne an array on this new type. The kind of object that an array element actually contains is determined by a tag. The following deﬁnes a structure that contains one of three types of data. struct Animal{ int id; union { Cat c; Dog d; Fox f; } } The programmer would have to establish a convention on how the id tag is to be used: for example, that id = 0 means that the animal represented by the struct is actually a cat, etc. The union allocates memory for the largest type among Cat, Dog, and Fox. This is wasteful of memory if there is a great disparity among the sizes of the objects. With the advent of object-oriented languages, it is now possible to deﬁne the base type Animal. Cat, Dog, and Fox may be implemented using inheritance as derived types of Animal. An array of pointers to Animal can now be deﬁned. These pointers can be used to refer to any of Cat, Dog, and Fox.

2.2.6

Multidimensional Arrays

Row- or Column Major Representation

Earlier representations of multidimensional arrays mapped the location of each element of the multidimensional array into a location of a one- dimensional array. Consider a twodimensional array with r rows and c columns. The number of elements in the array n = rc. The element in location [i][j], 0 ≤ i < r and 0 ≤ j < c, will be mapped onto an integer in the range [0, n − 1]. If this is done in row-major order — the elements of row 0 are listed in order from left to right followed by the elements of row 1, then row 2, etc. — the mapping function is ic + j. If elements are listed in column-major order, the mapping function is jr +i. Observe that we are required to perform a multiplication and an addition to compute the location of an element in an array. Array of Arrays Representation

In Java, a two-dimensional array is represented as a one-dimensional array in which each element is, itself, a one-dimensional array. The array int [][] x = new int[4][5]; is actually a one-dimensional array whose length is 4. Each element of x is a one-dimensional array whose length is 5. Figure 2.2 shows an example. This representation can also be used in C++ by deﬁning an array of pointers. Each pointer can then be used to point to a

© 2005 by Chapman & Hall/CRC

2-6

Handbook of Data Structures and Applications

[0] [1] [2] [3] [4] x[0] x[1] x[2] x[3] FIGURE 2.2: The Array of Arrays Representation.

dynamically-created one-dimensional array. The element x[i][j] is found by ﬁrst retrieving the pointer x[i]. This gives the address in memory of x[i][0]. Then x[i][j] refers to the element j in row i. Observe that this only requires the addition operator to locate an element in a one-dimensional array. Irregular Arrays

A two-dimensional array is regular in that every row has the same number of elements. When two or more rows of an array have diﬀerent number of elements, we call the array irregular. Irregular arrays may also be created and used using the array of arrays representation.

2.2.7

Sparse Matrices

A matrix is sparse if a large number of its elements are 0. Rather than store such a matrix as a two-dimensional array with lots of zeroes, a common strategy is to save space by explicitly storing only the non-zero elements. This topic is of interest to the scientiﬁc computing community because of the large sizes of some of the sparse matrices it has to deal with. The speciﬁc approach used to store matrices depends on the nature of sparsity of the matrix. Some matrices, such as the tridiagonal matrix have a well-deﬁned sparsity pattern. The tridiagonal matrix is one where all of the nonzero elements lie on one of three diagonals: the main diagonal and the diagonals above and below it. See Figure 2.3(a).

2

1

0

0

0

1

0

0

0

0

1

3

1

5

8

1

3

4

0

0

2

3

0

0

0

0

1

3

2

4

0

1

1

2

0

4

1

2

0

0

0

0

2

3

4

0

0

4

7

4

3

3

2

1

0

0

0

0

1

2

0

0

0

3

5

2

4

1

3

3

0

0

0

0

4

Tridiagonal Matrix

Lower Triangular Matrix

Upper Triangular Matrix

(a)

(b)

(c)

FIGURE 2.3: Matrices with regular structures.

© 2005 by Chapman & Hall/CRC

Basic Structures

2-7

There are several ways to represent this matrix as a one-dimensional array. We could order elements by rows giving [2,1,1,3,4,1,1,2,4,7,4,3,5] or by diagonals giving [1,1,4,3,2,3,1,7,5,1,4,2,4]. Figure 2.3 shows other special matrices: the upper and lower triangular matrices which can also be represented using a one-dimensional representation. Other sparse matrices may have an irregular or unstructured pattern. Consider the matrix in Figure 2.4(a). We show two representations. Figure 2.4(b) shows a one-dimensional array of triples, where each triple represents a nonzero element and consists of the row, column, and value. Figure 2.4(c) shows an irregular array representation. Each row is represented by a one-dimensional array of pairs, where each pair contains the column number and the corresponding nonzero value.

6

0

0

2

0

5

4

4

0

0

0

1

0

1

0

0

2

0

0

0

0

1

1

0

(a) (0,6)

(3,2)

(5,5)

(0,4)

(1,4)

(5,1)

(1,1)

(4,2)

(3,1)

(4,1)

row

0

0

0

1

1

1

2

2

3

3

col

0

3

5

0

1

5

1

4

3

4

val

6

2

5

4

4

1

1

2

1

1

(b)

(c) FIGURE 2.4: Unstructured matrices.

2.3

Linked Lists

The linked list is an alternative to the array when a collection of objects is to be stored. The linked list is implemented using pointers. Thus, an element (or node) of a linked list contains the actual data to be stored and a pointer to the next node. Recall that a pointer is simply the address in memory of the next node. Thus, a key diﬀerence from arrays is that a linked list does not have to be stored contiguously in memory.

List first

ListNode data link

....

FIGURE 2.5: The structure of a linked list.

© 2005 by Chapman & Hall/CRC

....

0

2-8

Handbook of Data Structures and Applications

The code fragment below deﬁnes a linked list data structure, which is also illustrated in Figure 2.5: class ListNode { friend class List; private: int data; ListNode *link; } class List { public: // List manipulation operations go here ... private: ListNode *first; } A chain is a linked list where each node contains a pointer to the next node in the list. The last node in the list contains a null (or zero) pointer. A circular list is identical to a chain except that the last node contains a pointer to the ﬁrst node. A doubly linked circular list diﬀers from the chain and the circular list in that each node contains two pointers. One points to the next node (as before), while the other points to the previous node.

2.3.1

Chains

The following code searches for a key k in a chain and returns true if the key is found and false, otherwise. bool List::Search(int k) { for (ListNode *current = first; current; current = current->next) if (current->data == k) then return true; return false; } In the worst case, Search takes Θ(n) time. In order to insert a node newnode in a chain immediately after node current, we simply set newnode’s pointer to the node following current (if any) and current’s pointer to newnode as shown in the Figure 2.6.

current first

....

....

0

newnode FIGURE 2.6: Insertion into a chain. The dashed links show the pointers after newnode has been inserted.

© 2005 by Chapman & Hall/CRC

Basic Structures

2-9

To delete a node current, it is necessary to have a pointer to the node preceding current. This node’s pointer is then set to current->next and node current is freed. Both insertion and deletion can be accomplished in O(1) time provided that the required pointers are initially available. Whether this is true or not depends on the context in which these operations are called. For example, if you are required to delete the node with key 50, if it exists, from a linked list, you would ﬁrst have to search for 50. Your search algorithm would maintain a trailing pointer so that when 50 is found, a pointer to the previous node is available. Even though, deletion takes Θ(1) time, deletion in this context would require Θ(n) time in the worst case because of the search. In some cases, the context depends on how the list is organized. For example, if the list is to be sorted, then node insertions should be made so as to maintain the sorted property (which could take Θ(n) time). On the other hand, if the list is unsorted, then a node insertion can take place anywhere in the list. In particular, the node could be inserted at the front of the list in Θ(1) time. Interestingly, the author has often seen student code in which the insertion algorithm traverses the entire linked list and inserts the new element at the end of the list! As with arrays, chains can be sorted or unsorted. Unfortunately, however, many of the beneﬁts of a sorted array do not extend to sorted linked lists because arbitrary elements of a linked list cannot be accessed quickly. In particular, it is not possible to carry out binary search in O(log n) time. Nor is it possible to locate the ith smallest element in O(1) time. On the other hand, merging two sorted lists into one sorted list is more convenient than merging two sorted arrays into one sorted array because the traditional implementation requires space to be allocated for the target array. A code fragment illustrating the merging of two sorted lists is shown below. This is a key operation in mergesort: void Merge(List listOne, List listTwo, List& merged) { ListNode* one = listOne.first; ListNode* two = listTwo.first; ListNode* last = 0; if (one == 0) {merged.first = two; return;} if (two == 0) {merged.first = one; return;} if (one->data < two->data) last = merged.first = one; else last = merged.first = two; while (one && two) if (one->data < two->data) { last->next = one; last= one; one = one->next; } else { last->next = two; last = two; two = two->next; } if (one) last->next = one; else last->next = two; } The merge operation is not deﬁned when lists are unsorted. However, one may need to combine two lists into one. This is the concatenation operation. With chains, the best approach is to attach the second list to the end of the ﬁrst one. In our implementation of the linked list, this would require one to traverse the ﬁrst list until the last node is encountered and then set its next pointer to point to the ﬁrst element of the second list. This requires

© 2005 by Chapman & Hall/CRC

2-10

Handbook of Data Structures and Applications

time proportional to the size of the ﬁrst linked list. This can be improved by maintaining a pointer to the last node in the linked list. It is possible to traverse a singly linked list in both directions (i.e., left to right and a restricted right-to-left traversal) by reversing links during the left-to-right traversal. Figure 2.7 shows a possible conﬁguration for a list under this scheme.

0

0

l

r

FIGURE 2.7: Illustration of a chain traversed in both directions.

As with the heterogeneous arrays described earlier, heterogeneous lists can be implemented in object-oriented languages by using inheritance.

2.3.2

Circular Lists

In the previous section, we saw that to concatenate two unsorted chains eﬃciently, one needs to maintain a rear pointer in addition to the ﬁrst pointer. With circular lists, it is possible to accomplish this with a single pointer as follows: consider the circular list in Figure 2.8. The second node in the list can be accessed through the ﬁrst in O(1) time.

Circlist first

ListNode data link

....

....

FIGURE 2.8: A circular list. Now, consider the list that begins at this second node and ends at the ﬁrst node. This may be viewed as a chain with access pointers to the ﬁrst and last nodes. Concatenation can now be achieved in O(1) time by linking the last node of one chain to the ﬁrst node of the second chain and vice versa.

2.3.3

Doubly Linked Circular Lists

A node in a doubly linked list diﬀers from that in a chain or a singly linked list in that it has two pointers. One points to the next node as before, while the other points to the previous node. This makes it possible to traverse the list in both directions. We observe that this is possible in a chain as we saw in Figure 2.7. The diﬀerence is that with a doubly linked list, one can initiate the traversal from any arbitrary node in the list. Consider the following problem: we are provided a pointer x to a node in a list and are required to delete

© 2005 by Chapman & Hall/CRC

Basic Structures

2-11

it as shown in Figure 2.9. To accomplish this, one needs to have a pointer to the previous node. In a chain or a circular list, an expensive list traversal is required to gain access to this previous node. However, this can be done in O(1) time in a doubly linked circular list. The code fragment that accomplishes this is as below: x

first

x

first

FIGURE 2.9: Deletion from a doubly linked list.

void DblList::Delete(DblListNode* x) { x->prev->next = x->next; x->next->prev = x->prev; delete x; } An application of doubly linked lists is to store a list of siblings in a Fibonacci heap (Chapter 7).

2.3.4

Generalized Lists

A generalized list A is a ﬁnite sequence of n ≥ 0 elements, e0 , e1 , ..., en−1 , where ei is either an atom or a generalized list. The elements ei that are not atoms are said to be sublists of A. Consider the generalized list A = ((a, b, c), ((d, e), f ), g). This list contains three elements: the sublist (a, b, c), the sublist ((d, e), f ) and the atom g. The generalized list may be implemented by employing a GenListNode type as follows: private: GenListNode* next; bool tag; union { char data;

© 2005 by Chapman & Hall/CRC

2-12

Handbook of Data Structures and Applications GenListNode* down;

}; If tag is true, the element represented by the node is a sublist and down points to the ﬁrst node in the sublist. If tag is false, the element is an atom whose value is contained in data. In both cases, next simply points to the next element in the list. Figure 2.10 illustrates the representation.

T

F

T

a

F

b

F

F

c

0

g

0

T

F

d

F

f

0

F

e

0

FIGURE 2.10: Generalized List for ((a,b,c),((d,e),f),g).

2.4

Stacks and Queues

The stack and the queue are data types that support insertion and deletion operations with well-deﬁned semantics. Stack deletion deletes the element in the stack that was inserted the last, while a queue deletion deletes the element in the queue that was inserted the earliest. For this reason, the stack is often referred to as a LIFO (Last In First Out) data type and the queue as an FIFO (First In First out) data type. A deque (double ended queue) combines the stack and the queue by supporting both types of deletions. Stacks and queues ﬁnd a lot of applications in Computer Science. For example, a system stack is used to manage function calls in a program. When a function f is called, the system creates an activation record and places it on top of the system stack. If function f calls function g, the local variables of f are added to its activation record and an activation record is created for g. When g terminates, its activation record is removed and f continues executing with the local variables that were stored in its activation record. A queue is used to schedule jobs at a resource when a ﬁrst-in ﬁrst-out policy is to be implemented. Examples could include a queue of print-jobs that are waiting to be printed or a queue of packets waiting to be transmitted over a wire. Stacks and queues are also used routinely to implement higher-level algorithms. For example, a queue is used to implement a breadthﬁrst traversal of a graph. A stack may be used by a compiler to process an expression such as (a + b) × (c + d).

2.4.1

Stack Implementation

Stacks and queues can be implemented using either arrays or linked lists. Although the burden of a correct stack or queue implementation appears to rest on deletion rather than

© 2005 by Chapman & Hall/CRC

Basic Structures

2-13

insertion, it is convenient in actual implementations of these data types to place restrictions on the insertion operation as well. For example, in an array implementation of a stack, elements are inserted in a left-to-right order. A stack deletion simply deletes the rightmost element. A simple array implementation of a stack class is shown below: class Stack { public: Stack(int maxSize = 100); // 100 is default size void Insert(int); int* Delete(int&); private: int *stack; int size; int top; // highest position in array that contains an element }; The stack operations are implemented as follows: Stack::Stack(int maxSize): size(maxSize) { stack = new int[size]; top = -1; } void Stack::Insert(int x) { if (top == size-1) cerr << "Stack Full" << endl; else stack[++top] = x; } int* Stack::Delete(int& x) { if (top == -1) return 0; // stack empty else { x = stack[top--]; return &x; } } The operation of the following code fragment is illustrated in Figure 2.11. Stack s; int x; s.Insert(10); s.Insert(20); s.Insert(30); s.Delete(x); s.Insert(40); s.Delete(x); It is easy to see that both stack operations take O(1) time. The stack data type can also be implemented using linked lists by requiring all insertions and deletions to be made at the front of the linked list.

© 2005 by Chapman & Hall/CRC

2-14

Handbook of Data Structures and Applications

2

30

2

20

20

20

20

20 1

10

10

10

10

10

10 0

top = 0

top = 1

top = 2

top = 1

top = 2

1 0 top = −1

40

top = 1

FIGURE 2.11: Stack operations.

2.4.2

Queue Implementation

An array implementation of a queue is a bit trickier than that of a stack. Insertions can be made in a left-to-right fashion as with a stack. However, deletions must now be made from the left. Consider a simple example of an array of size 5 into which the integers 10, 20, 30, 40, and 50 are inserted as shown in Figure 2.12(a). Suppose three elements are subsequently deleted (Figure 2.12(b)).

10 20 30 40 50 front

rear

(a)

40 50 front rear

(b)

FIGURE 2.12: Pitfalls of a simple array implementation of a queue.

What if we are now required to insert the integer 60. On one hand, it appears that we are out of room as there is no more place to the right of 50. On the other hand, there are three locations available to the left of 40. This suggests that we use a circular array implementation of a queue, which is described below. class Queue { public: Queue(int maxSize = 100); // 100 is default size void Insert(int); int* Delete(int&); private: int *queue; int size; int front, rear; }; The queue operations are implemented below: Queue::Queue(int maxSize): size(maxSize) { queue= new int[size];

© 2005 by Chapman & Hall/CRC

Basic Structures

2-15

front = rear = 0; } void Queue::Insert(int x) { int k = (rear + 1) % size; if (front == k) cerr << "Queue Full!" <, endl; else queue[rear = k] = x; } int* Queue::Delete(int& x) { if (front == rear) return 0; // queue is empty x = queue[++front %= size]; return &x; } Figure 2.13 illustrates the operation of this code on an example. The ﬁrst ﬁgure shows an empty queue with ﬁrst = rear = 0. The second ﬁgure shows the queue after the integer 10 is inserted. The third ﬁgure shows the queue when 20, 30, 40, 50, and 60 have been inserted. The fourth ﬁgure shows the queue after 70 is inserted. Notice that, although one slot remains empty, the queue is now full because Queue::Insert will not permit another element to be inserted. If it did permit an insertion at this stage, rear and front would be the same. This is the condition that Queue:Delete checks to determine whether the queue is empty! This would make it impossible to distinguish between the queue being full and being empty. The ﬁfth ﬁgure shows the queue after two integers (10 and 20) are deleted. The last ﬁgure shows a full queue after the insertion of integers 80 and 90. 3

4

3

2

5

1

6

front rear

0 3

rear

1 10

6

1 10

60 6

0 3

front 2

1 10

60 6

1

0

4 50

5

60 6 0

7

7

3 front

70

rear

front

7

30 40

70 7

40

50 5

50 5

0

30 2 20

2 20

front

4

5

4 30 40

3

2

front

7

4

4 30 40

2

50

1 90 rear

60 6 80

70

0

rear

FIGURE 2.13: Implementation of a queue in a circular array.

© 2005 by Chapman & Hall/CRC

5

7

rear

2-16

Handbook of Data Structures and Applications

It is easy to see that both queue operations take O(1) time. The queue data type can also be implemented using linked lists by requiring all insertions and deletions to be made at the front of the linked list.

Acknowledgments The author would like to thank Kun Gao, Dean Simmons and Mr. U. B. Rao for proofreading this chapter. This work was supported, in part, by the National Science Foundation under grant CCR-9988338.

References [1] D. Knuth, The Art of Computer Programming, Vol. 1, Fundamental Algorithms, Third edition. Addison-Wesley, NY, 1997. [2] S. Sahni, Data Structures, Algorithms, and Applications in C++, McGraw-Hill, NY, 1998. [3] S. Sahni, Data Structures, Algorithms, and Applications in Java, McGraw-Hill, NY, 2000. [4] E. Horowitz, S. Sahni, and D. Mehta, Fundamentals of Data Structures in C++, W. H. Freeman, NY, 1995. [5] D. Knuth, The Art of Computer Programming, Vol. 3, Sorting and Searching, Second edition. Addison-Wesley, NY, 1997. [6] Practical in-place merging, B. Huang and M. Langston, Communications of the ACM, 31:3, 1988, pp. 348-352.

© 2005 by Chapman & Hall/CRC

3 Trees 3.1 3.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tree Representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-1 3-3

List Representation • Left Child-Right Sibling Representation • Binary Tree Representation

3.3

Binary Trees and Properties . . . . . . . . . . . . . . . . . . . . . . Properties

3.4

•

Binary Tree Traversals . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inorder Traversal • Preorder Traversal Traversal • Level Order Traversal

3.5 3.6

•

Colorado School of Mines

3.1

3.8

3-9

Inorder Traversal of a Threaded Binary

•

Search

•

Insert

•

Delete

•

Heaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

•

3-13

•

Tournament Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Winner Trees

3-10

Miscellaneous

Priority Queues • Deﬁnition of a Max-Heap Insertion • Deletion

Dinesh P. Mehta

3-7

Postorder

Binary Search Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deﬁnition

3.7

•

Threaded Binary Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . Threads Tree

3-4

Binary Tree Representation

3-16

Loser Trees

Introduction

The tree is a natural representation for hierarchical information. Thus, trees are used to represent genealogical information (e.g., family trees and evolutionary trees), organizational charts in large companies, the directory structure of a ﬁle system on a computer, parse trees in compilers and the structure of a knock-out sports tournament. The Dewey decimal notation, which is used to classify books in a library, is also a tree structure. In addition to these and other applications, the tree is used to design fast algorithms in computer science because of its eﬃciency relative to the simpler data structures discussed in Chapter 2. Operations that take linear time on these structures often take logarithmic time on an appropriately organized tree structure. For example, the average time complexity for a search on a key is linear on a linked list and logarithmic on a binary search tree. Many of the data structures discussed in succeeding chapters of this handbook are tree structures. Several kinds of trees have been deﬁned in the literature: 1. Free or unrooted tree: this is deﬁned as a graph (a set of vertices and a set of edges that join pairs of vertices) such that there exists a unique path between any two vertices in the graph. The minimum spanning tree of a graph is a well-known example of a free tree. Graphs are discussed in Chapter 4. 2. Rooted tree: a ﬁnite set of one or more nodes such that

3-1

© 2005 by Chapman & Hall/CRC

3-2

Handbook of Data Structures and Applications (a) There is a special node called the root. (b) The remaining nodes are partitioned into n ≥ 0 disjoint sets T1 , ..., Tn , where each of these sets is a tree. T1 , ..., Tn are called the subtrees of the root. If the order in which the subtrees are arranged is not important, then the tree is a rooted, unordered (or oriented) tree. If the order of the subtrees is important, the tree is rooted and ordered. Figure 3.1 depicts the relationship between the three types of trees. We will henceforth refer to the rooted, ordered tree simply as “tree”.

A

B

C

A

D

C

B

B

D

A

C

D

FIGURE 3.1: The three trees shown are distinct if they are viewed as rooted, ordered trees. The ﬁrst two are identical if viewed as oriented trees. All three are identical if viewed as free trees.

3. k-ary tree: a ﬁnite set of nodes that is either empty or consists of a root and the elements of k disjoint k-ary trees called the 1st, 2nd, ..., kth subtrees of the root. The binary tree is a k-ary tree with k = 2. Here, the ﬁrst and second subtrees are respectively called the left and right subtrees of the root. Note that binary trees are not trees. One diﬀerence is that a binary tree can be empty, whereas a tree cannot. Second, the two trees shown in Figure 3.2 are diﬀerent binary trees but would be diﬀerent drawings of the same tree.

A

B

A

B

FIGURE 3.2: Diﬀerent binary trees.

Figure 3.3 shows a tree with 11 nodes. The number of subtrees of a node is its degree. Nodes with degree 0 are called leaf nodes. Thus, node A has degree 3, nodes B, D, and I have degree 2, node E has degree 1, and nodes C, F , G, H, J, and K have degree 0 (and are leaves of the tree). The degree of a tree is the maximum of the degree of the nodes in the tree. The roots of the subtrees of a node X are its children. X is the parent of

© 2005 by Chapman & Hall/CRC

Trees

3-3

its children. Children of the same parent are siblings. In the example, B, C, and D are each other’s siblings and are all children of A. The ancestors of a node are all the nodes excluding itself along the path from the root to that node. The level of a node is deﬁned by letting the root be at level zero. If a node is at level l, then its children are at level l + 1. The height of a tree is the maximum level of any node in the tree. The tree in the example has height 4. These terms are deﬁned in the same way for binary trees. See [1–6] for more information on trees.

LEVEL A B E

0

C F

D G

1 H

I J

2 3

K

4 FIGURE 3.3: An example tree.

3.2 3.2.1

Tree Representation List Representation

The tree of Figure 3.3 can be written as the generalized list (A (B (E (I (J, K)), F), C, D(G, H))). The information in the root node comes ﬁrst followed by a list of subtrees of the root. This enables us to represent a tree in memory using generalized lists as discussed in Chapter 2.

3.2.2

Left Child-Right Sibling Representation

Figure 3.4(a) shows the node structure used in this representation. Each node has a pointer to its leftmost child (if any) and to the sibling on its immediate right (if any). The tree in Figure 3.3 is represented by the tree in Figure 3.4(b).

3.2.3

Binary Tree Representation

Observe that the left child-right sibling representation of a tree (Figure 3.4(b)) may be viewed as a binary tree by rotating it clockwise by 45 degrees. This gives the binary tree

© 2005 by Chapman & Hall/CRC

3-4

Handbook of Data Structures and Applications data

left child

A

A

right sibling B

(a) E

C

F

B

D G

I

I J

K

(b)

C

E

H

D

F G

J K

(c)

H

FIGURE 3.4: Tree Representations.

representation shown in Figure 3.4(c). This representation can be extended to represent a forest, which is deﬁned as an ordered set of trees. Here, the roots of the trees are viewed as siblings. Thus, a root’s right pointer points to the next tree root in the set. We have There is a one-to-one correspondence between the set of forests and the set of binary trees.

LEMMA 3.1

3.3

Binary Trees and Properties

Binary trees were deﬁned in Section 3.1. For convenience, a binary tree is sometimes extended by adding external nodes. External nodes are imaginary nodes that are added wherever an empty subtree was present in the original tree. The original tree nodes are known as internal nodes. Figure 3.5(a) shows a binary tree and (b) the corresponding extended tree. Observe that in an extended binary tree, all internal nodes have degree 2 while all external nodes have degree 0. (Some authors use the term full binary tree to denote a binary tree whose nodes have 0 or two children.) The external path length of a tree is the sum of the lengths of all root-to-external node paths in the tree. In the example, this is 2 + 2 + 3 + 3 + 2 = 12. The internal path length is similarly deﬁned by adding lengths of all root-to-internal node paths. In the example, this quantity is 0 + 1 + 1 + 2 = 4.

3.3.1

Properties

LEMMA 3.2

A binary tree with n internal nodes has n + 1 external nodes.

© 2005 by Chapman & Hall/CRC

Trees

3-5

A

A B

B

C D

1

C D

2 3

(a)

5 4

(b)

FIGURE 3.5: (b) shows the extended binary tree corresponding to the binary tree of (a). External nodes are depicted by squares.

Each internal node in the extended tree has branches leading to two children. Thus, the total number of branches is 2n. Only n − 1 internal nodes have a single incoming branch from a parent (the root does not have a parent). Thus, each of the remaining n + 1 branches points to an external node. Proof

LEMMA 3.3 For any non-empty binary tree with n0 leaf nodes and n2 nodes of degree 2, n0 = n2 + 1.

Let n1 be the number of nodes of degree 1 and n = n0 + n1 + n2 (Eq. 1) be the total number of nodes. The number of branches in a binary tree is n − 1 since each non-root node has a branch leading into it. But, all branches stem from nodes of degree 1 and 2. Thus, the number of branches is n1 + 2n2 . Equating the two expressions for number of branches, we get n = n1 + 2n2 + 1 (Eq. 2). From Eqs. 1 and 2, we get n0 = n2 + 1. Proof

The external path length of any binary tree with n internal nodes is 2n greater than its internal path length.

LEMMA 3.4

Proof The proof is by induction. The lemma clearly holds for n = 0 when the internal and external path lengths are both zero. Consider an extended binary tree T with n internal nodes. Let ET and IT denote the external and internal path lengths of T . Consider the extended binary tree S that is obtained by deleting an internal node whose children are both external nodes (i.e., a leaf) and replacing it with an external node. Let the deleted internal node be at level l. Thus, the internal path length decreases by l while the external path length decreases by 2(l + 1) − l = l + 2. From the induction hypothesis, ES = IS + 2(n − 1). But, ET = ES + l + 2 and IT = IS + l. Thus, ET − IT = 2n. LEMMA 3.5 Proof

The maximum number of nodes on level i of a binary tree is 2i , i ≥ 0.

This is easily proved by induction on i.

© 2005 by Chapman & Hall/CRC

3-6

Handbook of Data Structures and Applications The maximum number of nodes in a binary tree of height k is 2k+1 − 1.

LEMMA 3.6 Proof

2

k+1

− 1.

Each level i, 0 ≤ i ≤ k, has 2i nodes. Summing over all i results in

k i=0

2i =

LEMMA 3.7 The height of a binary tree with n internal nodes is at least log2 (n + 1) and at most n − 1.

The worst case is a skewed tree (Figure 3.6(a)) and the best case is a tree with 2i nodes at every level i except possibly the bottom level (Figure 3.6(b)). If the height is h, then n + 1 ≤ 2h , where n + 1 is the number of external nodes. Proof

1 A

1 2 B

2 4 D

3 4

(a)

3 5 E

6 F

H

I

J

K

L

8

9

10

11

12

5

C 7 G

(b)

FIGURE 3.6: (a) Skewed and (b) complete binary trees.

LEMMA 3.8

The number of distinct binary trees with n nodes is

2n 1 n+1 n

.

Proof 2n For a detailed proof, we refer the reader to [7]. However, we note that Cn = 1

n+1 n are known as the Catalan numbers, which occur frequently in combinatorial problems. The Catalan number Cn also describes the number of trees with n + 1 nodes and the number of binary trees with 2n + 1 nodes all of which have 0 or 2 children.

3.3.2

Binary Tree Representation

Binary trees are usually represented using nodes and pointers. A TreeNode class may be deﬁned as: class TreeNode { TreeNode* LeftChild;

© 2005 by Chapman & Hall/CRC

Trees

3-7

TreeNode* RightChild; KeyType data; }; In some cases, a node might also contain a parent pointer which facilitates a “bottom-up” traversal of the tree. The tree is accessed by a pointer root of type TreeNode* to its root. When the binary tree is complete (i.e., there are 2i nodes at every level i, except possibly the last level which has nodes ﬁlled in from left to right), it is convenient to use an array representation. The complete binary tree in Figure 3.6(b) can be represented by the array 1 [ A

2 B

3 C

4 D

5 E

6 F

7 G

8 H

9 I

10 11 12 J K L ]

Observe that the children (if any) of a node located at position i of the array can be found at positions 2i and 2i + 1 and its parent at i/2.

3.4

Binary Tree Traversals

Several operations on trees require one to traverse the entire tree: i.e., given a pointer to the root of a tree, process every node in the tree systematically. Printing a tree is an example of an operation that requires a tree traversal. Starting at a node, we can do one of three things: visit the node (V ), traverse the left subtree recursively (L), and traverse the right subtree recursively (R). If we adopt the convention that the left subtree will be visited before the right subtree, we have three types of traversals LV R, V LR, and LRV which are called inorder, preorder, and postorder, respectively, because of the position of V with respect to L and R. In the following, we will use the expression tree in Figure 3.7 to illustrate the three traversals, which result in inﬁx, preﬁx, and postﬁx forms of the expression. A fourth traversal, the level order traversal, is also studied.

+

* A

*

B

C

D

FIGURE 3.7: An expression tree.

3.4.1

Inorder Traversal

The following is a recursive algorithm for an inorder traversal that prints the contents of each node when it is visited. The recursive function is invoked by the call inorder(root). When run on the example expression tree, it returns A*B+C*D. inorder(TreeNode* currentNode) {

© 2005 by Chapman & Hall/CRC

3-8

Handbook of Data Structures and Applications if (currentNode) { inorder(currentNode->LeftChild); cout << currentNode->data; inorder(currentNode->RightChild); }

}

3.4.2

Preorder Traversal

The following is a recursive algorithm for a preorder traversal that prints the contents of each node when it is visited. The recursive function is invoked by the call preorder(root). When run on the example expression tree, it returns +*AB*CD. preorder(TreeNode* currentNode) { if (currentNode) { cout << currentNode->data; preorder(currentNode->LeftChild); preorder(currentNode->RightChild); } }

3.4.3

Postorder Traversal

The following is a recursive algorithm for a postorder traversal that prints the contents of each node when it is visited. The recursive function is invoked by the call postorder(root). When run on the example expression tree, it prints AB*CD*+. postorder(TreeNode* currentNode) { if (currentNode) { postorder(currentNode->LeftChild); postorder(currentNode->RightChild); cout << currentNode->data; } } The complexity of each of the three algorithms is linear in the number of tree nodes. Nonrecursive versions of these algorithms may be found in [6]. Both versions require (implicitly or explicitly) a stack.

3.4.4

Level Order Traversal

The level order traversal uses a queue. This traversal visits the nodes in the order suggested in Figure 3.6(b). It starts at the root and then visits all nodes in increasing order of their level. Within a level, the nodes are visited in left-to-right order. LevelOrder(TreeNode* root) { Queue q; TreeNode* currentNode = root;

© 2005 by Chapman & Hall/CRC

Trees

3-9

while (currentNode) { cout << currentNode->data; if (currentNode->LeftChild) q.Add(currentNode->LeftChild); if (currentNode->RightChild) q.Add(currentNode->RightChild); currentNode = q.Delete(); //q.Delete returns a node pointer } }

3.5 3.5.1

Threaded Binary Trees Threads

Lemma 3.2 implies that a binary tree with n nodes has n + 1 null links. These null links can be replaced by pointers to nodes called threads. Threads are constructed using the following rules: 1. A null right child pointer in a node is replaced by a pointer to the inorder successor of p (i.e., the node that would be visited after p when traversing the tree inorder). 2. A null left child pointer in a node is replaced by a pointer to the inorder predecessor of p. Figure 3.8 shows the binary tree of Figure 3.7 with threads drawn as broken lines. In order

+

* A

*

B

C

D

FIGURE 3.8: A threaded binary tree.

to distinguish between threads and normal pointers, two boolean ﬁelds LeftThread and RightThread are added to the node structure. If p->LeftThread is 1, then p->LeftChild contains a thread; otherwise it contains a pointer to the left child. Additionally, we assume that the tree contains a head node such that the original tree is the left subtree of the head node. The LeftChild pointer of node A and the RightChild pointer of node D point to the head node.

3.5.2

Inorder Traversal of a Threaded Binary Tree

Threads make it possible to perform an inorder traversal without using a stack. For any node p, if p’s right thread is 1, then its inorder successor is p->RightChild. Otherwise the inorder successor is obtained by following a path of left-child links from the right child of p until a node with left thread 1 is reached. Function Next below returns the inorder

© 2005 by Chapman & Hall/CRC

3-10

Handbook of Data Structures and Applications

successor of currentNode (assuming that currentNode is not 0). It can be called repeatedly to traverse the entire tree in inorder in O(n) time. The code below assumes that the last node in the inorder traversal has a threaded right pointer to a dummy head node. TreeNode* Next(TreeNode* currentNode) { TreeNode* temp = currentNode->RightChild; if (currentNode->RightThread == 0) while (temp->LeftThread == 0) temp = temp->LeftChild; currentNode = temp; if (currentNode == headNode) return 0; else return currentNode; } Threads simplify the algorithms for preorder and postorder traversal. It is also possible to insert a node into a threaded tree in O(1) time [6].

3.6

Binary Search Trees

3.6.1

Deﬁnition

A binary search tree (BST) is a binary tree that has a key associated with each of its nodes. The keys in the left subtree of a node are smaller than or equal to the key in the node and the keys in the right subtree of a node are greater than or equal to the key in the node. To simplify the discussion, we will assume that the keys in the binary search tree are distinct. Figure 3.9 shows some binary trees to illustrate the deﬁnition.

12

18 10 7

4

19 9

16

(a)

10

2

16 6

14

(b)

5

15

18

20

(c)

25

FIGURE 3.9: Binary trees with distinct keys: (a) is not a BST. (b) and (c) are BSTs.

3.6.2

Search

We describe a recursive algorithm to search for a key k in a tree T : ﬁrst, if T is empty, the search fails. Second, if k is equal to the key in T ’s root, the search is successful. Otherwise,

© 2005 by Chapman & Hall/CRC

Trees

3-11

we search T ’s left or right subtree recursively for k depending on whether it is less or greater than the key in the root. bool Search(TreeNode* b, KeyType k) { if (b == 0) return 0; if (k == b->data) return 1; if (k < b->data) return Search(b->LeftChild,k); if (k > b->data) return Search(b->RightChild,k); }

3.6.3

Insert

To insert a key k, we ﬁrst carry out a search for k. If the search fails, we insert a new node with k at the null branch where the search terminated. Thus, inserting the key 17 into the binary search tree in Figure 3.9(b) creates a new node which is the left child of 18. The resulting tree is shown in Figure 3.10(a).

14

12 4 2

16 6

4 18

14

2

16 6

18

17 (a)

(b)

FIGURE 3.10: Tree of Figure 3.9(b) with (a) 18 inserted and (b) 12 deleted.

typedef TreeNode* TreeNodePtr; Node* Insert(TreeNodePtr& b, KeyType k) { if (b == 0) {b = new TreeNode; b->data= k; return b;} if (k == b->data) return 0; // don’t permit duplicates if (k < b->data) Insert(b->LeftChild, k); if (k > b->data) Insert(b->RightChild, k); }

3.6.4

Delete

The procedure for deleting a node x from a binary search tree depends on its degree. If x is a leaf, we simply set the appropriate child pointer of x’s parent to 0 and delete x. If x has one child, we set the appropriate pointer of x’s parent to point directly to x’s child and

© 2005 by Chapman & Hall/CRC

3-12

Handbook of Data Structures and Applications

then delete x. In Figure 3.9(c), node 20 is deleted by setting the right child of 15 to 25. If x has two children, we replace its key with the key in its inorder successor y and then delete node y. The inorder successor contains the smallest key greater than x’s key. This key is chosen because it can be placed in node x without violating the binary search tree property. Since y is obtained by ﬁrst following a RightChild pointer and then following LeftChild pointers until a node with a null LeftChild pointer is encountered, it follows that y has degree 0 or 1. Thus, it is easy to delete y using the procedure described above. Consider the deletion of 12 from Figure 3.9(b). This is achieved by replacing 12 with 14 in the root and then deleting the leaf node containing 14. The resulting tree is shown in Figure 3.10(b).

3.6.5

Miscellaneous

Although Search, Insert, and Delete are the three main operations on a binary search tree, there are others that can be deﬁned which we brieﬂy describe below. • Minimum and Maximum that respectively ﬁnd the minimum and maximum elements in the binary search tree. The minimum element is found by starting at the root and following LeftChild pointers until a node with a 0 LeftChild pointer is encountered. That node contains the minimum element in the tree. • Another operation is to ﬁnd the kth smallest element in the binary search tree. For this, each node must contain a ﬁeld with the number of nodes in its left subtree. Suppose that the root has m nodes in its left subtree. If k ≤ m, we recursively search for the kth smallest element in the left subtree. If k = m + 1, then the root contains the kth smallest element. If k > m+1, then we recursively search the right subtree for the k − m − 1st smallest element. • The Join operation takes two binary search trees A and B as input such that all the elements in A are smaller than all the elements of B. The objective is to obtain a binary search tree C which contains all the elements originally in A and B. This is accomplished by deleting the node with the largest key in A. This node becomes the root of the new tree C. Its LeftChild pointer is set to A and its RightChild pointer is set to B. • The Split operation takes a binary search tree C and a key value k as input. The binary search tree is to be split into two binary search trees A and B such that all keys in A are less than or equal to k and all keys in B are greater than k. This is achieved by searching for k in the binary search tree. The trees A and B are created as the search proceeds down the tree as shown in Figure 3.11. • An inorder traversal of a binary search tree produces the elements of the binary search tree in sorted order. Similarly, the inorder successor of a node with key k in the binary search tree yields the smallest key larger than k in the tree. (Note that we used this property in the Delete operation described in the previous section.) All of the operations described above take O(h) time, where h is the height of the binary search tree. The bounds on the height of a binary tree are derived in Lemma 3.7. It has been shown that when insertions and deletions are made at random, the height of the binary search tree is O(log n) on the average.

© 2005 by Chapman & Hall/CRC

Trees

3-13

25

15 8

23

25

10

30

10 5

30

20

20

5

35 27

23

15

27 26

35 38

8

38

26

FIGURE 3.11: Splitting a binary search tree with k = 26.

3.7 3.7.1

Heaps Priority Queues

Heaps are used to implement priority queues. In a priority queue, the element with highest (or lowest) priority is deleted from the queue, while elements with arbitrary priority are inserted. A data structure that supports these operations is called a max(min) priority queue. Henceforth, in this chapter, we restrict our discussion to a max priority queue. A priority queue can be implemented by a simple, unordered linked list. Insertions can be performed in O(1) time. However, a deletion requires a search for the element with the largest priority followed by its removal. The search requires time linear in the length of the linked list. When a max heap is used, both of these operations can be performed in O(log n) time.

3.7.2

Deﬁnition of a Max-Heap

A max heap is a complete binary tree such that for each node, the key value in the node is greater than or equal to the value in its children. Observe that this implies that the root contains the largest value in the tree. Figure 3.12 shows some examples of max heaps.

16 15

8

20 3

6

19

4

12

FIGURE 3.12: Max heaps.

We deﬁne a class Heap with the following data members.

© 2005 by Chapman & Hall/CRC

6

10

22

6

1

3-14

Handbook of Data Structures and Applications

private: Element *heap; int n; // current size of max heap int MaxSize; // Maximum allowable size of the heap The heap is represented using an array (a consequence of the complete binary tree property) which is dynamically allocated.

3.7.3

Insertion

Suppose that the max heap initially has n elements. After insertion, it will have n + 1 elements. Thus, we need to add a node so that the resulting tree is a complete binary tree with n + 1 nodes. The key to be inserted is initially placed in this new node. However, the key may be larger than its parent resulting in a violation of the max property with its parent. In this case, we swap keys between the two nodes and then repeat the process at the next level. Figure 3.13 demonstrates two cases of an insertion into a max heap.

20

20

15 4

12 3

15 4

20

x=8

Insert x 12 3

15

x

4

12 3

8

20

x=16 15 4

16 3

12

FIGURE 3.13: Insertion into max heaps.

The algorithm is described below. In the worst case, the insertion algorithm moves up the heap from leaf to root spending O(1) time at each level. For a heap with n elements, this takes O(log n) time. void MaxHeap::Insert(Element x) { if (n == MaxSize) {HeapFull(); return;} n++; for (int i = n; i > 1; i = i/2 ) { if (x.key <= heap[i/2].key) break; heap[i] = heap[i/2]; } heap[i] = x; }

© 2005 by Chapman & Hall/CRC

Trees

3-15

3.7.4

Deletion

The element to be deleted (i.e., the maximum element in the heap) is removed from the root node. Since the binary tree must be restructured to become a complete binary tree on n − 1 elements, the node in position n is deleted. The element in the deleted node is placed in the root. If this element is less than either of the root’s (at most) two children, there is a violation of the max property. This is ﬁxed by swapping the value in the root with its larger child. The process is repeated at the other levels until there is no violation. Figure 3.14 illustrates deletion from a max heap.

3

20 DeleteMax 15 4

15

12 4

3

12 3

15 4

15

15 3

12

4

12

4

12

3

FIGURE 3.14: Deletion from max heaps.

The deletion algorithm is described below. In the worst case, the deletion algorithm moves down the heap from root to leaf spending O(1) time at each level. For a heap with n elements, this takes O(log n) time. Element* MaxHeap::DeleteMax(Element& x) { if (n == 0) {HeapEmpty(); return 0;} x = heap[1]; Element last = heap[n]; n--; for (int i = 1, j = 2; j <= n; i = j, j *= 2) { if (j < n) if (heap[j].key < heap[j+1].key) j++; // j points to the larger child if (last.key >= heap[j].key) break; heap[i] = heap[j]; // move child up } heap[i] = last; return &x; }

© 2005 by Chapman & Hall/CRC

3-16

3.8

Handbook of Data Structures and Applications

Tournament Trees

Consider the following problem: suppose we have k sequences, each of which is sorted in nondecreasing order, that are to be merged into one sequence in nondecreasing order. This can be achieved by repeatedly transferring the element with the smallest key to an output array. The smallest key has to be found from the leading elements in the k sequences. Ordinarily, this would require k − 1 comparisons for each element transferred. However, with a tournament tree, this can be reduced to log2 k comparisons per element.

3.8.1

Winner Trees

A winner tree is a complete binary tree in which each node represents the smaller of its two children. The root represents the smallest node in the tree. Figure 3.15 illustrates a winner tree with k = 8 sequences. The winner of the tournament is the value 8 from sequence 0. The winner of the tournament is the smallest key from the 8 sequences and is transferred

8 8

18

8

15

37

18

8

22

15

45

37

41

18

26

19

25

20

50

40

42

21

31

20

30

26

62

50

43

36

38

S0

S1

S2

S3

S4

S5

S6

S7

FIGURE 3.15: A winner tree for k = 8. Three keys in each of the eight sequences are shown. For example, sequence 2 consists of 15, 20, and 26.

to an output array. The next element from sequence 0 is now brought into play and a tournament is played to determine the next winner. This is illustrated in Figure 3.16. It is easy to see that the tournament winner can be computed in Θ(log n) time.

3.8.2

Loser Trees

The loser tree is an alternative representation that stores the loser of a match at the corresponding node. The loser tree corresponding to Figure 3.15 is shown in Figure 3.17. An advantage of the loser tree is that to restructure the tree after a winner has been output, it is suﬃcient to examine nodes on the path from the leaf to the root rather than the siblings of nodes on this path.

© 2005 by Chapman & Hall/CRC

Trees

3-17

15 15

18

19

15

37

18

19

22

15

45

37

41

18

26

20

25

20

50

40

42

21

31

30

26

62

50

43

36

38

S1

S2

S3

S4

S5

S6

S7

S0

FIGURE 3.16: Winner tree of Figure 3.15 after the next element of sequence 0 plays the tournament. Matches are played at the shaded nodes.

8

tournament winner

18 15

37

22

45

41

26

8

22

15

45

37

41

18

26

19

25

20

50

40

42

21

31

20

30

26

62

50

43

36

38

S0

S1

S2

S3

S4

S5

S6

S7

FIGURE 3.17: Loser tree corresponding to the winner tree of Figure 3.15.

© 2005 by Chapman & Hall/CRC

3-18

Handbook of Data Structures and Applications

Acknowledgments The author would like to thank Kun Gao and Mr. U. B. Rao for proofreading this chapter. This work was supported, in part, by the National Science Foundation under grant CCR9988338.

References [1] D. Knuth, The Art of Computer Programming, Vol. 1, Fundamental Algorithms, Third edition. Addison Wesley, NY, 1997. [2] T. Cormen, C. Leiserson, R. Rivest, and C. Stein, Introduction to Algorithms, Second edition. McGraw-Hill, New York, NY, 2001. [3] S. Sahni, Data Structures, Algorithms, and Applications in C++, McGraw-Hill, NY, 1998. [4] S. Sahni, Data Structures, Algorithms, and Applications in Java, McGraw-Hill, NY, 2000. [5] R. Sedgewick, Algorithms in C++, Parts 1-4, Third edition. Addison-Wesley, NY, 1998. [6] E. Horowitz, S. Sahni, and D. Mehta Fundamentals of Data Structures in C++, W. H. Freeman, NY, 1995. [7] D. Stanton and D. White, Constructive Combinatorics, Springer-Verlag, NY, 1986.

© 2005 by Chapman & Hall/CRC

4 Graphs 4.1 4.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Graph Representations . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-1 4-3

Weighted Graph Representation

4.3

Connectivity, Distance, and Spanning Trees . . .

4-6

Spanning Trees

4.4

Searching a Graph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Depth-First Search

4.5

•

Simple Applications of DFS and BFS . . . . . . . . . . . Depth-First Search on a Digraph Sorting

4.6

•

Minimum Spanning Tree . . . . . . . . . . . . . . . . . . . . . . . . . .

University of Central Florida

4.1

4.8

4-14 •

Shortest Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single-Source Shortest Paths, Nonnegative Weights Single-Source Shortest Paths, Arbitrary Weights • All-Pairs Shortest Paths

Narsingh Deo

4-12

Topological

Kruskal’s MST Algorithm • Prim’s MST Algorithm Boruvka’s MST Algorithm • Constrained MST

4.7

4-8

Breadth-First Search

4-19

•

Eulerian and Hamiltonian Graphs . . . . . . . . . . . . . . .

4-24

Introduction

Trees, as data structures, are somewhat limited because they can only represent relations of a hierarchical nature, such as that of parent and child. A generalization of a tree so that a binary relation is allowed between any pair of elements would constitute a graph—formally deﬁned as follows: A graph G = (V, E) consists of a ﬁnite set of vertices V = {υ1 , υ2 , . . . , υn } and a ﬁnite set E of edges E = {e1 , e2 , . . . , em } (see Figure 4.1). To each edge e there corresponds a pair of vertices (u, υ) which e is said to be incident on. While drawing a graph we represent each vertex by a dot and each edge by a line segment joining its two end vertices. A graph is said to be a directed graph (or digraph for short) (see Figure 4.2) if the vertex pair (u, υ) associated with each edge e (also called arc) is an ordered pair. Edge e is then said to be directed from vertex u to vertex υ, and the direction is shown by an arrowhead on the edge. A graph is undirected if the end vertices of all the edges are unordered (i.e., edges have no direction). Throughout this chapter we use the letters n and m to denote the number of vertices |V | and number of edges |E| respectively, in a graph. A vertex is often referred to as a node (a term more popular in applied ﬁelds). Two or more edges having the same pair of end vertices are called parallel edges or multi edges, and a graph with multi edges is sometimes referred to as a multigraph. An edge whose two end vertices are the same is called a self-loop (or just loop). A graph in which neither

4-1

© 2005 by Chapman & Hall/CRC

4-2

Handbook of Data Structures and Applications

FIGURE 4.1: Undirected graph with 5 vertices and 6 edges.

FIGURE 4.2: Digraph with 6 vertices and 11 edges.

parallel edges nor self-loops are allowed is often called a simple graph. If both self-loops and parallel edges are allowed we have a general graph (also referred to as pseudograph). Graphs in Figure 4.1 and Figure 4.2 are both simple but the graph in Figure 4.3 is pseudograph. If the graph is simple we can refer to each edge by its end vertices. The number of edges incident on a vertex v, with self-loops counted twice, is called the degree, deg(v), of vertex v. In directed graphs a vertex has in-degree (number of edges going into it) and out-degree (number of edges going out of it). In a digraph if there is a directed edge (x, y) from x to y, vertex y is called a successor of x and vertex x is called a predecessor of y. In case of an undirected graph two vertices are said to be adjacent or neighbors if there is an edge between them. A weighted graph is a (directed or undirected) graph in which a real number is assigned to each edge. This number is referred to as the weight of that edge. Weighted directed graphs are often referred to as networks. In a practical network this number (weight) may represent the driving distance, the construction cost, the transit time, the reliability, the transition probability, the carrying capacity, or any other such attribute of the edge [1, 4, 18, 20]. Graphs are the most general and versatile data structures. Graphs have been used to model and solve a large variety of problems in the discrete domain. In their modeling and problem solving ability graphs are to the discrete world what diﬀerential equations are to

© 2005 by Chapman & Hall/CRC

Graphs

4-3

FIGURE 4.3: A pseudograph of 6 vertices and 10 edges.

the world of the continuum.

4.2

Graph Representations

For a given graph a number of diﬀerent representations are possible. The ease of implementation, as well as the eﬃciency of a graph algorithm depends on the proper choice of the graph representation. The two most commonly used data structures for representing a graph (directed or undirected) are adjacency lists and adjacency matrix . In this section we discuss these and other data structures used in representing graphs. Adjacency Lists: The adjacency lists representation of a graph G consists of an array Adj of n linked lists, one for each vertex in G, such that Adj[υ] for vertex υ consists of all vertices adjacent to υ. This list is often implemented as a linked list. (Sometimes it is also represented as a table, in which case it is called the star representation [18].) Adjacency Matrix: The adjacency matrix of a graph G = (V, E) is an n × n matrix A = [aij ] in which aij = 1 if there is an edge from vertex i to vertex j in G; otherwise aij = 0. Note that in an adjacency matrix a self-loop can be represented by making the corresponding diagonal entry 1. Parallel edges could be represented by allowing an entry to be greater than 1, but doing so is uncommon, since it is usually convenient to represent each element in the matrix by a single bit. The adjacency lists and adjacency matrix of an undirected graph are shown in Figure 4.4, and the corresponding two representations for a digraph are shown in Figure 4.5.

© 2005 by Chapman & Hall/CRC

4-4

Handbook of Data Structures and Applications

(a)

(b) ⎛

0 ⎜ 1 ⎜ ⎝ 1 1

1 0 0 0

⎞ 1 0 ⎟ ⎟ 1 ⎠ 0

1 0 0 1 (c)

FIGURE 4.4: An undirected graph (a) with four vertices and four edges; (b) its adjacency lists representation, and (c) its adjacency matrix representation.

(a)

(b) ⎛ ⎜ ⎜ ⎜ ⎜ ⎝

0 1 0 0 0

1 0 1 0 1

0 0 1 0 0

1 1 1 0 0

0 0 0 0 0

⎞ ⎟ ⎟ ⎟ ⎟ ⎠

(c)

FIGURE 4.5: Two representations: (a) A digraph with ﬁve vertices and eight edges; (b) its adjacency lists representation, and (c) its adjacency matrix representation.

© 2005 by Chapman & Hall/CRC

Graphs

4-5

Clearly the memory required to store a graph of n vertices in the form of adjacency matrix is O(n2 ), whereas for storing it in the form of its adjacency lists is O(m + n). In general if the graph is sparse, adjacency lists are used but if the graph is dense, adjacency matrix is preferred. The nature of graph processing is an important factor in selecting the data structure. There are other less frequently used data structures for representing graphs, such as forward or backward star , the edge-list, and vertex-edge incidence matrix [1, 4, 15, 18, 20].

4.2.1

Weighted Graph Representation

Both adjacency lists and adjacency matrix can be adapted to take into account the weights associated with each edge in the graph. In the former case an additional ﬁeld is added in the linked list to include the weight of the edge; and in the latter case the graph is represented by a weight matrix in which the (i, j)th entry is the weight of edge (i, j) in the weighted graph. These two representations for a weighted graph are shown in Figure 4.6. The boxed numbers next to the edges in Figure 4.6(a) are the weights of the corresponding edges. It should be noted that in a weight matrix, W , of a weighted graph, G, if there is no edge (i, j) in G, the corresponding element wij is usually set to ∞ (in practice, some very large number). The diagonal entries are usually set to ∞ (or to some other value depending on the application and algorithm). It is easy to see that the weight matrix of an undirected graph (like the adjacency matrix) is symmetric.

(a)

(b) ⎛ ⎜ ⎜ W =⎜ ⎜ ⎝

− 19 18 ∞ ∞

∞ − 43 ∞ 16

35 ∞ − ∞ ∞

∞ 85 11 − 77

43 ∞ ∞ ∞ −

⎞ ⎟ ⎟ ⎟ ⎟ ⎠

(c)

FIGURE 4.6: Two representations: (a) A weighted digraph with ﬁve vertices and nine edges; (b) its adjacency lists, and (c) its weight matrix.

© 2005 by Chapman & Hall/CRC

4-6

4.3

Handbook of Data Structures and Applications

Connectivity, Distance, and Spanning Trees

Just as two vertices x and y in a graph are said to be adjacent if there is an edge joining them, two edges are said to be adjacent if they share (i.e., are incident on) a common vertex. A simple path, or path for short, is a sequence of adjacent edges (υ1 , υ2 ), (υ2 , υ3 ), . . ., (υk−2 , υk−1 ), (υk−1 , υk ), sometimes written (υ1 , υ2 , . . . , υk ), in which all the vertices υ1 , υ2 , . . . , υk are distinct except possibly υ1 = υk . In a digraph this path is said to be directed from υ1 to υk ; in an undirected graph this path is said to be between υ1 and υk . The number of edges in a path, in this case, k − 1, is called the length of the path. In Figure 4.3 sequence (υ6 , υ4 ), (υ4 , υ1 ), (υ1 , υ2 ) = (υ6 , υ4 , υ1 , υ2 ) is a path of length 3 between υ6 and υ2 . In the digraph in Figure 4.6 sequence (3, 1), (1, 5), (5, 2), (2, 4) = (3, 1, 5, 2, 4) is a directed path of length 4 from vertex 3 to vertex 4. A cycle or circuit is a path in which the ﬁrst and the last vertices are the same. In Figure 4.3 (υ3 , υ6 , υ4 , υ1 , υ3 ) is a cycle of length 4. In Figure 4.6 (3, 2, 1, 3) is a cycle of length 3. A graph that contains no cycle is called acyclic. A subgraph of a graph G = (V, E) is a graph whose vertices and edges are in G. A subgraph g of G is said to be induced by a subset of vertices S ⊆ V if g results when the vertices in V − S and all the edges incident on them are removed from G. For example, in Figure 4.3, the subgraph induced by {υ1 , υ3 , υ4 } would consists of these three vertices and four edges {e3 , e5 , e6 , e7 }. An undirected graph G is said to be connected if there is at least one path between every pair of vertices υi and υj in G. Graph G is said to be disconnected if it has at least one pair of distinct vertices u and v such that there is no path between u and v. Two vertices x and y in an undirected graph G = (V, E) are said to be connected if there exists a path between x and y. This relation of being connected is an equivalence relation on the vertex set V , and therefore it partitions the vertices of G into equivalence classes. Each equivalence class of vertices induces a subgraph of G. These subgraphs are called connected components of G. In other words, a connected component is a maximal connected subgraph of G. A connected graph consists of just one component, whereas a disconnected graph consists of several (connected) components. Each of the graphs in Figures 4.1, 4.3, and 4.4 is connected. But the graph given in Figure 4.7 is disconnected, consisting of four components.

FIGURE 4.7: A disconnected graph of 10 vertices, 8 edges, and 4 components.

© 2005 by Chapman & Hall/CRC

Graphs

4-7

Notice that a component may consist of just one vertex such as j in Figure 4.7 with no edges. Such a component (subgraph or graph) is called an isolated vertex . Equivalently, a vertex with zero degree is called an isolated vertex. Likewise, a graph (subgraph or component) may consist of just one edge, such as edge (i, d) in Figure 4.7. One of the simplest and often the most important and useful questions about a given graph G is: Is G connected? And if G is not connected what are its connected components? This question will be taken up in the next section, and an algorithm for determining the connected components will be provided; but ﬁrst a few more concepts and deﬁnitions. Connectivity in a directed graph G is more involved. A digraph is said to be connected if the undirected graph obtained by ignoring the edge directions in G is connected. A directed graph is said to be strongly connected if for every pair of vertices υi and υj there exists at least one directed path from υi to υj and at least one from υj to υi . A digraph which is connected but not strongly connected is called weakly connected . A disconnected digraph (like a disconnected undirected graph) consists of connected components; and a weaklyconnected digraph consists of strongly-connected components. For example, the connected digraph in Figure 4.5 consists of four strongly-connected components—induced by each of the following subsets of vertices {1, 2},{3},{4}, and {5}. Another important question is that of distance from one vertex to another. The distance from vertex a to b is the length of the shortest path (i.e., a path of the smallest length) from a to b, if such a path exists. If no path from a to b exists, the distance is undeﬁned and is often set to ∞. Thus, the distance from a vertex to itself is 0; and the distance from a vertex to an adjacent vertex is 1. In an undirected graph distance from a to b equals the distance from b to a, i.e., it is symmetric. It is also not diﬃcult to see that the distances in a connected undirected graph (or a strongly connected digraph) satisfy the triangle inequality. In a connected, undirected (unweighted) graph G, the maximum distance between any pair of vertices is called the diameter of G.

4.3.1

Spanning Trees

A connected, undirected, acyclic (without cycles) graph is called a tree, and a set of trees is called a forest . We have already seen rooted trees and forests of rooted trees in the preceding chapter, but the unrooted trees and forests discussed in this chapter are graphs of a very special kind that play an important role in many applications. In a connected undirected graph G there is at least one path between every pair of vertices and the absence of a cycle implies that there is at most one such path between any pair of vertices in G. Thus if G is a tree, there is exactly one path between every pair of vertices in G. The argument is easily reversed, and so an undirected graph G is a tree if and only if there is exactly one path between every pair of vertices in G. A tree with n vertices has exactly (n − 1) edges. Since (n − 1) edges are the fewest possible to connect n points, trees can be thought of as graphs that are minimally connected . That is, removing any edge from a tree would disconnect it by destroying the only path between at least one pair of vertices. A spanning tree for a connected graph G is a subgraph of G which is a tree containing every vertex of G. If G is not connected, a set consisting of one spanning tree for each component is called a spanning forest of G. To construct a spanning tree (forest) of a given undirected graph G, we examine the edges of G one at a time and retain only those that do not not form a cycle with the edges already selected. Systematic ways of examining the edges of a graph will be discussed in the next section.

© 2005 by Chapman & Hall/CRC

4-8

4.4

Handbook of Data Structures and Applications

Searching a Graph

It is evident that for answering almost any nontrivial question about a given graph G we must examine every edge (and in the process every vertex) of G at least once. For example, before declaring a graph G to be disconnected we must have looked at every edge in G; for otherwise, it might happen that the one edge we had decided to ignore could have made the graph connected. The same can be said for questions of separability, planarity, and other properties [15, 16]. There are two natural ways of scanning or searching the edges of a graph as we move from vertex to vertex: (i) once at a vertex v we scan all edges incident on v and then move to an adjacent vertex w, then from w we scan all edges incident on w. This process is continued till all the edges reachable from v are scanned. This method of fanning out from a given vertex v and visiting all vertices reachable from v in order of their distances from v (i.e. ﬁrst visit all vertices at a distance one from v, then all vertices at distances two from v, and so on) is referred to as the breadth-ﬁrst search (BFS) of the graph. (ii) An opposite approach would be, instead of scanning every edge incident on vertex v, we move to an adjacent vertex w (a vertex not visited before) as soon as possible, leaving v with possibly unexplored edges for the time being. In other words, we trace a path through the graph going on to a new vertex whenever possible. This method of traversing the graph is called the depth-ﬁrst search (DFS). Breadth-ﬁrst and depth-ﬁrst searches are fundamental methods of graph traversal that form the basis of many graph algorithms [7, 15, 16, 19]. The details of these two methods follow.

4.4.1

Depth-First Search

Depth-ﬁrst search on an undirected graph G = (V, E) explores the graph as follows. When we are “visiting” a vertex v ∈ V , we follow one of the edges (v, w) incident on v. If the vertex w has been previously visited, we return to v and choose another edge. If the vertex w (at the other end of edge (v, w) from v) has not been previously visited, we visit it and apply the process recursively to w. If all the edges incident on v have been thus traversed, we go back along the edge (u, v) that had ﬁrst led to the current vertex v and continue exploring the edges incident on u. We are ﬁnished when we try to back up from the vertex at which the exploration began. Figure 4.8 illustrates how depth-ﬁrst search examines an undirected graph G represented as an adjacency lists. We start with a vertex a. From a we traverse the ﬁrst edge that we encounter, which is (a, b). Since b is a vertex never visited before, we stay at b and traverse the ﬁrst untraversed edge encountered at b, which is (b, c). Now at vertex c, the ﬁrst untraversed edge that we ﬁnd is (c, a). We traverse (c, a) and ﬁnd that a has been previously visited. So we return to c, marking the edge (c, a) in some way (as a dashed line in Figure 4.8(c)) to distinguish it from edges like (b, c), which lead to new vertices and shown as the thick lines. Back at vertex c, we look for another untraversed edge and traverse the ﬁrst one that we encounter, which is (c, d). Once again, since d is a new vertex, we stay at d and look for an untraversed edge. And so on. The numbers next to the vertices in Figure 4.8(c) show the order in which they were visited; and the numbers next to the edges show the order in which they were traversed.

© 2005 by Chapman & Hall/CRC

Graphs

4-9

(a)

(b)

(c) FIGURE 4.8: A graph (a); its adjacency lists (b); and its depth-ﬁrst traversal (c). The numbers are the order in which vertices were visited and edges traversed. Edges whose traversal led to new vertices are shown with thick lines, and edges that led to vertices that were already visited are shown with dashed lines.

DepthFirstSearch(G) for each vertex x ∈ V do num[x] ← 0 end for T reeEdges ← 0 i←0 for each vertex x ∈ V do if num[x] = 0 then DFS-Visit(x) end if end for

© 2005 by Chapman & Hall/CRC

4-10

Handbook of Data Structures and Applications

DFS-Visit(v) i←i+1 num[v] ← i for each vertex w ∈ Adj[v] do if num[w] = 0 then {// w is new vertex //} T reeEdges ← T reeEdges ∪ (v, w) {// (v, w) is a tree edge //} DFS-Visit(w) end if end for FIGURE 4.9: Algorithm for depth-ﬁrst search on an undirected graph G.

Depth-ﬁrst search performed on a connected undirected graph G = (V, E), partitions the edge set into two types: (i) Those that led to new vertices during the search constitute the branches of a spanning tree of G and (ii) the remaining edges in E are called back edges because their traversal led to an already visited vertex from which we backed down to the current vertex. A recursive depth-ﬁrst search algorithm is given in Figure 4.9. Initially, every vertex x is marked unvisited by setting num[x] to 0. Note that in the algorithm shown in Figure 4.9, only the tree edges are kept track of. The time complexity of the depth-ﬁrst search algorithm is O(m + n), provided the input is in the form of an adjacency matrix.

4.4.2

Breadth-First Search

In breadth-ﬁrst search we start exploring from a speciﬁed vertex s and mark it “visited”. All other vertices of the given undirected graph G are marked as “unvisited” by setting num[] = 0. Then we visit all vertices adjacent to s (i.e., in the adjacency list of s). Next, we visit all unvisited vertices adjacent to the ﬁrst vertex in the adjacency list of s. Unlike the depth-ﬁrst search, in breadth-ﬁrst search we explore (fan out) from vertices in order in which they themselves were visited. To implement this method of search, we maintain a queue (Q) of visited vertices. As we visit a new vertex for the ﬁrst time, we place it in (i.e., at the back of) the queue. We take a vertex v from front of the queue and traverse all untraversed edges incident at v—adding to the list of tree edges those edges that lead to unvisited vertices from v ignoring the rest. Once a vertex v has been taken out of the queue, all the neighbors of v are visited and v is completely explored. Thus, during the execution of a breadth-ﬁrst search we have three types of vertices: (i) unvisited, those that have never been in the queue; (ii) completely explored, those that have been in the queue but are not now in the queue; and (iii) visited but not completely explored, i.e., those that are currently in the queue. Since every vertex (reachable from the start vertex s) enters and exits the queue exactly once and every edge in the adjacency list of a vertex is traversed exactly once, the time complexity of the breadth-ﬁrst search is O(n + m).

© 2005 by Chapman & Hall/CRC

Graphs

4-11

BreadthFirstSearch(G, s) for each vertex x ∈ V − {s} do visited[x] ← 0 {// all vertices unvisited except s //} end for T reeEdges ← null Q ← φ {// queue of vertices is initially empty //} visited[s] ← 1 {// mark s as visited //} enqueue(Q, s) {// place s in the queue //} while Q = φ do {// queue is not empty //} v ← dequeue(Q) for each w ∈ Adj[v] do if visited[w] = 0 then {// w is a new vertex //} visited[w] ← 1 T reeEdges ← T reeEdges ∪ {(v, w)} enqueue(Q, w) end if end for end while FIGURE 4.10: Algorithm for breadth-ﬁrst search on an undirected graph G from vertex s.

An algorithm for performing a breadth-ﬁrst search on an undirected connected graph G from a speciﬁed vertex s is given in Figure 4.10. It produces a breadth-ﬁrst tree in G rooted at vertex s. For example, the spanning tree produced by BFS conducted on the graph in Figure 4.8 starting at vertex a, is shown in Figure 4.11. The numbers next to the vertices show the order in which the vertices were visited during the BFS.

FIGURE 4.11: Spanning tree produced by breadth-ﬁrst search on graph in Figure 4.8 starting from vertex a. The numbers show the order in which vertices were visited.

© 2005 by Chapman & Hall/CRC

4-12

4.5

Handbook of Data Structures and Applications

Simple Applications of DFS and BFS

In the preceding section we discussed two basic but powerful and eﬃcient techniques for systematically searching a graph such that every edge is traversed exactly once and every vertex is visited once. With proper modiﬁcations and embellishments these search techniques can be used to solve a variety of graph problems. Some of the simple ones are discussed in this section. Cycle Detection: The existence of a back edge (i.e., a nontree edge) during a depthﬁrst search indicates the existence of cycle. To test this condition we just add an else clause to the if num[w] = 0 statement in DFS-Visit(v) procedure in Figure 4.9. That is, if num[w] = 0, (v, w) is a back edge, which forms a cycle with tree edges in the path from w to v. Spanning Tree: If the input graph G for the depth-ﬁrst (or breadth-ﬁrst) algorithm is connected, the set TreeEdges at the termination of the algorithm in Figure 4.9 (or in Figure 4.10, for breadth-ﬁrst) produces a spanning tree of G. Connected Components: If, on the other hand, the input graph G = (V, E) is disconnected we can use depth-ﬁrst search to identify each of its connected components by assigning a unique component number compnum[v] to every vertex belonging to one component. The pseudocode of such an algorithm is given below (Figure 4.12) for each vertex v ∈ V do compnum[v] ← 0 end for for each vertex v ∈ V do if compnum[v] = 0 then c←c+1 COMP(v) end if end for COMP(x) compnum[x] ← c for each w ∈ Adj[x] do if compnum[w] = 0 then COMP(w) end if end for FIGURE 4.12: Depth-ﬁrst search algorithm for ﬁnding connected components of a graph.

4.5.1

Depth-First Search on a Digraph

Searching a digraph is somewhat more involved because the direction of the edges is an additional feature that must be taken into account. In fact, a depth-ﬁrst search on a digraph produces four kinds of edges (rather than just two types for undirected graphs):

© 2005 by Chapman & Hall/CRC

Graphs

4-13

(i) Tree edges—lead to an unvisited vertex (ii) Back edges—lead to an (visited) ancestor vertex in the tree (iii) Down-edges (also called forward edges) lead to a (visited) descendant vertex in the tree, and (iv) Cross edges, lead to a visited vertex, which is neither ancestor nor descendant in the tree [3, 15, 16, 18, 19].

4.5.2

Topological Sorting

The simplest use of the depth-ﬁrst search technique on digraphs is to determine a labeling of the vertices of an acyclic digraph G = (V, E) with integers 1, 2, . . . , |V |, such that if there is a directed edge from vertex i to vertex j, then i < j; such a labeling is called topological sort of the vertices of G. For example, the vertices of the digraph in Figure 4.13(a) are topologically sorted but those of Figure 4.13(b) are not. Topological sorting can be viewed as the process of ﬁnding a linear order in which a given partial order can be embedded. It is not diﬃcult to show that it is possible to topologically sort the vertices of a digraph if and only if it is acyclic. Topological sorting is useful in the analysis of activity networks where a large, complex project is represented as a digraph in which the vertices correspond to the goals in the project and the edges correspond to the activities. The topological sort gives an order in which the goals can be achieved [1, 9, 18].

(a) Topologically sorted.

(b) Not topologically sorted.

FIGURE 4.13: Acyclic digraphs.

Topological sorting begins by ﬁnding a vertex of G = (V, E) with no outgoing edge (such a vertex must exist if G is acyclic) and assigning this vertex the highest number—namely, |V |. This vertex is then deleted from G, along with all its incoming edges. Since the remaining digraph is also acyclic, we can repeat the process and assign the next highest number, namely |V | − 1, to a vertex with no outgoing edges, and so on. To keep the algorithm O(|V | + |E|), we must avoid searching the modiﬁed digraph for a vertex with no outgoing edges. We do so by performing a single depth-ﬁrst search on the given acyclic digraph G. In addition to the usual array num, we will need another array, label, of size |V | for recording the topologically sorted vertex labels. That is, if there is an edge (u, v) in G, then label[u] < label[v]. The complete search and labeling procedure TOPSORT is given in Figure 4.14. Use the acyclic digraph in Figure 4.13(a) with vertex set V = {a, b, c, d, e, f, g} as the input

© 2005 by Chapman & Hall/CRC

4-14

Handbook of Data Structures and Applications

to the topological sort algorithm in Figure 4.14; and verify that the vertices get relabeled 1 to 7, as shown next to the original names—in a correct topological order.

Topological-Sort(G) for each vertex x ∈ V do num[x] ← 0 label[x] ← 0 end for j ←n+1 i←0 for each vertex x ∈ V do if num[x] = 0 then {// x has no labeled ancestor //} TOPSORT(x) end if end for TOPSORT(v) i←i+1 num[v] ← i for each w ∈ Adj[v] do {// examine all descendants of w //} if num[w] = 0 then TOPSORT(w) else if label[w] = 0 then Error {// cycle detected //} end if j ←j−1 label[v] ← j end for FIGURE 4.14: Algorithm for topological sorting.

4.6

Minimum Spanning Tree

How to connect a given set of points with lowest cost is a frequently-encountered problem, which can be modeled as the problem of ﬁnding a minimum-weight spanning tree T in a weighted, connected, undirected graph G = (V, E). Methods for ﬁnding such a spanning tree, called a minimum spanning tree (MST), have been investigated in numerous studies and have a long history [8]. In this section we will discuss the bare essentials of the two commonly used MST algorithms—Kruskal’s and Prim’s—and brieﬂy mention a third one.

4.6.1

Kruskal’s MST Algorithm

An algorithm due to J. B. Kruskal, which employs the smallest-edge-ﬁrst strategy, works as follows: First we sort all the edges in the given network by weight, in nondecreasing order. Then one by one the edges are examined in order, smallest to the largest. If an edge ei , upon examination, is found to form a cycle (when added to edges already selected)

© 2005 by Chapman & Hall/CRC

Graphs

4-15

it is discarded. Otherwise, ei is selected to be included in the minimum spanning tree T . The construction stops when the required n − 1 edges have been selected or when all m edges have been examined. If the given network is disconnected, we would get a minimum spanning forest (instead of tree). More formally, Kruskal’s method may be stated as follows: T ←φ while |T | < (n − 1) and E = φ do e ← smallest edge in E E ← E − {e} if T ∪ {e} has no cycle then T ← T ∪ {e} end if end while if |T | < (n − 1) then write ‘network disconnected’ end if

Although the algorithm just outlined is simple enough, we do need to work out some implementation details and select an appropriate data structure for achieving an eﬃcient execution. There are two crucial implementational details that we must consider in this algorithm. If we initially sort all m edges in the given network, we may be doing a lot of unnecessary work. All we really need is to be able to to determine the next smallest edge in the network at each iteration. Therefore, in practice, the edges are only partially sorted and kept as a heap with smallest edge at the root of a min heap. In a graph with m edges, the initial construction of the heap would require O(m) computational steps; and the next smallest edge from a heap can be obtained in O(log m) steps. With this improvement, the sorting cost is O(m + p log m), where p is the number of edges examined before an MST is constructed. Typically, p is much smaller than m. The second crucial detail is how to maintain the edges selected (to be included in the MST) so far, such that the next edge to be examined can be eﬃciently tested for a cycle formation. As edges are examined and included in T , a forest of disconnected trees (i.e., subtrees of the ﬁnal spanning tree) is produced. The edge e being examined will form a cycle if and only if both its end vertices belong to the same subtree in T . Thus to ensure that the edge currently being examined does not form a cycle, it is suﬃcient to check if it connects two diﬀerent subtrees in T . An eﬃcient way to accomplish this is to group the n vertices of the given network into disjoint subsets deﬁned by the subtrees (formed by the edges included in T so far). Thus if we maintain the partially constructed MST by means of subsets of vertices, we can add a new edge by forming the UNION of two relevant subsets, and we can check for cycle formation by FINDing if the two end vertices of the edge, being examined, are in the same subset. These subsets can themselves be kept as rooted trees. The root is an element of the subset and is used as a name to identify that subset. The FIND subprocedure is called twice—once for each end vertex of edge e—to determine the sets to which the two end vertices belong. If they are diﬀerent, the UNION subprocedure will merge the two subsets. (If they are the same subset, edge e will be discarded.) The subsets, kept as rooted trees, are implemented by keeping an array of parent pointers

© 2005 by Chapman & Hall/CRC

4-16

Handbook of Data Structures and Applications

for each of the n elements. Parent of a root, of course, is null. (In fact, it is useful to assign parent[root] = -number of vertices in the tree.) While taking the UNION of two subsets, we merge the smaller subset into the larger one by pointing the parent pointer in the root of the smaller subset to the root of the larger subset. Some of these details are shown in Figure 4.15. Note that r1 and r2 are the roots identifying the sets to which vertices u and v belong. INITIALIZATION: set parent array to -1 {// n vertices from singleton sets //} form initial heap of m edges ecount ← 0 {// number of edges examined so far //} tcount ← 0 {// number of edges in T so far //} T ←φ ITERATION: while tcount < (n − 1) and ecount < m do e ← edge(u, v) from top of heap ecount ← ecount + 1 remove e from heap restore heap r1 ← FIND(u) r2 ← FIND(v) if r1 = r2 then T ← T ∪ {e} tcount ← tcount + 1 UNION(r1, r2) end if end while if tcount < (n − 1) then write ‘network disconnected’ end if FIGURE 4.15: Kruskal’s minimum spanning tree algorithm.

When algorithm in Figure 4.15 is applied to the weighted graph in Figure 4.16, the order in which edges are included one by one to form the MST are (3, 5), (4, 6), (4, 5), (4, 2), (6, 7), (3, 1). After the ﬁrst ﬁve smallest edges are included in the MST, the 6th and 7th and 8th smallest edges are rejected. Then the 9th smallest edge (1, 3) completes the MST and the last two edges are ignored.

4.6.2

Prim’s MST Algorithm

A second algorithm, discovered independently by several people (Jarnik in 1936, Prim in 1957, Dijkstra in 1959) employs the “nearest neighbor ” strategy and is commonly referred to as Prim’s algorithm. In this method one starts with an arbitrary vertex s and joins it to its nearest neighbor, say y. That is, of all edges incident on vertex s, edge (s, y), with the smallest weight, is made part of the MST. Next, of all the edges incident on s or y we

© 2005 by Chapman & Hall/CRC

Graphs

4-17

choose one with minimum weight that leads to some third vertex, and make this edge part of the MST. We continue this process of “reaching out” from the partially constructed tree (so far) and bringing in the “nearest neighbor” until all vertices reachable from s have been incorporated into the tree.

FIGURE 4.16: A connected weighted graph for MST algorithm.

As an example, let us use this method to ﬁnd the minimum spanning tree of the weighted graph given in Figure 4.16. Suppose that we start at vertex 1. The nearest neighbor of vertex 1 is vertex 3. Therefore, edge (1, 3) becomes part of the MST. Next, of all the edges incident on vertices 1 and 3 (and not included in the MST so far) we select the smallest, which is edge (3, 5) with weight 14. Now the partially constructed tree consists of two edges (1, 3) and (3, 5). Among all edges incident at vertices 1,3, and 5, edge (5, 4) is the smallest, and is therefore included in the MST. The situation at this point is shown in Figure 4.17. Clearly, (4, 6), with weight 18 is the next edge to be included. Finally, edges (4, 2) and (6, 7) will complete the desired MST.

FIGURE 4.17: Partially constructed MST for the network of Figure 4.16.

© 2005 by Chapman & Hall/CRC

4-18

Handbook of Data Structures and Applications

The primary computational task in this algorithm is that of ﬁnding the next edge to be included into the MST in each iteration. For each eﬃcient execution of this task we will maintain an array near[u] for each vertex u not yet in the tree (i.e., u ∈ V − VT ). near[u] is that vertex in VT which is closest to u. (Note that V is the set of all vertices in the network and VT is the subset of V included in MST thus far.) Initially, we set near[s] ← 0 to indicate that s is in the tree, and for every other vertex v, near[v] ← s.

For convenience, we will maintain another array dist[u] of the actual distance (i.e., edge weight) to that vertex in VT which is closest to u. In order to determine which vertex is to be added to the set VT next, we compare all nonzero values in dist array and pick the smallest. Thus n − i comparisons are suﬃcient to identify the ith vertex to be added. Initially, since s is the only vertex in VT , dist[u] is set to wsu . As the algorithm proceeds, these two arrays are updated in each iteration (see Figure 4.17 for an illustration).

A formal description of the nearest-neighbor algorithm is given in Figure 4.18. It is assumed that the input is given in the form of an n×n weight matrix W (in which nonexistent edges have ∞ weights). Set V = {1, 2, . . . , n} is the set of vertices of the graph. VT and ET are the sets of vertices and edges of the partially formed (minimum spanning) tree. Vertex set VT is identiﬁed by zero entries in array near. INITIALIZATION: choose starting vertex s arbitrarily for every vertex i other than s do near[i] ← s dist[i] ← wsi end for VT ← {s} {// set of vertices in MST so far //} ET ← φ {// set of edges in MST so far //} ITERATION: while |VT | < n do u ← vertex in (V − VT ) with smallest value of dist(u) if dist[u] ≥ ∞ then write ‘graph disconnected’ and exit end if ET ← ET ∪ {(u, near[u])} VT ← VT ∪ {u} for x ∈ (V − VT ) do if wux < dist[x] then dist[x] ← wux near[x] ← u end if end for end while FIGURE 4.18: Prim’s minimum spanning tree algorithm.

© 2005 by Chapman & Hall/CRC

Graphs

4.6.3

4-19

Boruvka’s MST Algorithm

There is yet a third method for computing a minimum spanning tree, which was ﬁrst proposed by O. Boruvka in 1926 (but rediscovered by G. Chouqet in 1938 and G. Sollin in 1961). It works as follows: First, the smallest edge incident on each vertex is found; these edges form part of the minimum spanning tree. There are at least n/2 such edges. The connected components formed by these edges are collapsed into “supernodes”. (There are no more than n/2 such vertices at this point.) The process is repeated on “supernodes” and then on the resulting “supersupernodes,” and so on, until only a single vertex remains. This will require at most log2 n steps, because at each step the number of vertices is reduced at least by a factor of 2. Because of its inherent parallelism the nearest-neighborfrom-each-vertex approach is particularly appealing for parallel implementations. These three “greedy” algorithms and their variations have been implemented with diﬀerent data structures and their relative performance—both theoretical as well as empirical— have been studied widely. The results of some of these studies can be found in [2, 13, 14, 16].

4.6.4

Constrained MST

In many applications, the minimum spanning tree is required to satisfy an additional constraint, such as (i) the degree of each vertex in the MST should be equal to or less than a speciﬁed value; or (ii) the diameter of the MST should not exceed a speciﬁed value; or (iii) the MST must have at least a speciﬁed number of leaves (vertices of degree 1 in a tree); and the like. The problem of computing such a constrained minimum spanning tree is usually NP-complete. For a discussion of various constrained MST problems and some heuristics solving them see [6].

4.7

Shortest Paths

In the preceding section we dealt with the problem of connecting a set of points with smallest cost. Another commonly encountered and somewhat related problem is that of ﬁnding the lowest-cost path (called shortest path) between a given pair of points. There are many types of shortest-path problems. For example, determining the shortest path (i.e., the most economical path or fastest path, or minimum-fuel-consumption path) from one speciﬁed vertex to another speciﬁed vertex; or shortest paths from a speciﬁed vertex to all other vertices; or perhaps shortest path between all pairs of vertices. Sometimes, one wishes to ﬁnd a shortest path from one given vertex to another given vertex that passes through certain speciﬁed intermediate vertices. In some applications, one requires not only the shortest but also the second and third shortest paths. Thus, the shortest-path problems constitute a large class of problems; particularly if we generalize it to include related problems, such as the longest-path problems, the most-reliable-path problems, the largest-capacity-path problems, and various routing problems. Therefore, the number of papers, books, reports, dissertations, and surveys dealing with the subject of shortest paths runs into hundreds [5]. Here we will discuss two very basic and important shortest-path problems: (i) how to determine the shortest distance (and a shortest path) from a speciﬁed vertex s to another speciﬁed vertex t, and (ii) how to determine shortest distances (and paths) from every vertex to every other vertex in the network. Several other problems can be solved using these two basic algorithms.

© 2005 by Chapman & Hall/CRC

4-20

4.7.1

Handbook of Data Structures and Applications

Single-Source Shortest Paths, Nonnegative Weights

Let us ﬁrst consider a classic algorithm due to Dijkstra for ﬁnding a shortest path (and its weight) from a speciﬁed vertex s (source or origin) to another speciﬁed vertex t (target or sink ) in a network G in which all edge weights are nonnegative. The basic idea behind Dijkstra’s algorithm is to fan out from s and proceed toward t (following the directed edges), labeling the vertices with their distances from s obtained so far. The label of a vertex u is made permanent once we know that it represents the shortest possible distance from s (to u). All vertices not permanently labeled have temporary labels. We start by giving a permanent label 0 to source vertex s, because zero is the distance of s from itself. All other vertices get labeled ∞, temporarily, because they have not been reached yet. Then we label each immediate successor v of source s, with temporary labels equal to the weight of the edge (s, v). Clearly, the vertex, say x, with smallest temporary label (among all its immediate successors) is the vertex closest to s. Since all edges have nonnegative weights, there can be no shorter path from s to x. Therefore, we make the label of x permanent. Next, we ﬁnd all immediate successors of vertex x, and shorten their temporary labels if the path from s to any of them is shorter by going through x (than it was without going through x). Now, from among all temporarily labeled vertices we pick the one with the smallest label, say vertex y, and make its label permanent. This vertex y is the second closest vertex from s. Thus, at each iteration, we reduce the values of temporary labels whenever possible (by selecting a shorter path through the most recent permanently labeled vertex), then select the vertex with the smallest temporary label and make it permanent. We continue in this fashion until the target vertex t gets permanently labeled. In order to distinguish the permanently labeled vertices from the temporarily labeled ones, we will keep a Boolean array f inal of order n. When the ith vertex becomes permanently labeled, the ith element of this array changes from f alse to true. Another array, dist, of order n will be used to store labels of vertices. A variable recent will be used to keep track of most recent vertex to be permanently labeled. Assuming that the network is given in the form of a weight matrix W = [wij ], with ∞ weights for nonexistent edges, and vertices s and t are speciﬁed, this algorithm (which is called Dijkstra’s shortest-path or the label-setting algorithm) may be described as follows (Figure 4.19):

INITIALIZATION: for all v ∈ V do dist[v] ← ∞ f inal[v] ← f alse pred[v] ← −1 end for dist[s] ← 0 f inal[s] ← true recent ← s {// vertex s is permanently labeled with 0. All other vertices are temporarily labeled with ∞. Vertex s is the most recent vertex to be permanently labeled //}

© 2005 by Chapman & Hall/CRC

Graphs

4-21

ITERATION: while f inal[t] = f alse do for every immediate successor v of recent do if not f inal[v] then {// update temporary labels //} newlabel ← dist[recent] + wrecent,v if newlabel < dist[v] then dist[v] ← newlabel pred[v] ← recent {// relabel v if there is a shorter path via vertex recent and make recent the predecessor of v on the shortest path from s //} end if end if end for let y be the vertex with the smallest temporary label, which is = ∞ f inal[y] ← true recent ← y {// y, the next closest vertex to s gets permanently labeled //} end while FIGURE 4.19: Dijkstra’s shortest-path algorithm.

4.7.2

Single-Source Shortest Paths, Arbitrary Weights

In Dijkstra’s shortest-path algorithm (Figure 4.19), it was assumed that all edge weights wij were nonnegative numbers. If some of the edge weights are negative, Dijkstra’s algorithm will not work. (Negative weights in a network may represent costs and positive ones, proﬁt.) The reason for the failure is that once the label of a vertex is made permanent, it cannot be changed in future iterations. In order to handle a network that has both positive and negative weights, we must ensure that no label is considered permanent until the program halts. Such an algorithm (called a label-correcting method , in contrast to Dijkstra’s labelsetting method ) is described as below. Like Dijkstra’s algorithm, the label of the starting vertex s is set to zero and that of every other vertex is set to ∞, a very large number. That is, the initialization consists of dist(s) ← 0 for all v = s do dist(v) ← ∞ end for In the iterative step, dist(v) is always updated to the currently known distance from s to v, and the predecessor pred(v) of v is also updated to be the predecessor vertex of v on the currently known shortest path from s to v. More compactly, the iteration may be expressed as follows: while ∃ an edge (u, v) such that dist(u) + wuv < dist(v) do dist(v) ← dist(u) + wuv pred(v) ← u end while Several implementations of this basic iterative step have been studied, experimented with, and reported in the literature. One very eﬃcient implementation, works as follows. We maintain a queue of “vertices to be examined”. Initially, this queue, Q, contains only the starting vertex s. The vertex u from the front of the queue is “examined” (as follows)

© 2005 by Chapman & Hall/CRC

4-22

Handbook of Data Structures and Applications

and deleted. Examining u consists of considering all edges (u, v) going out of u. If the length of the path to vertex v (from s) is reduced by going through u, that is, if dist(u) + wuv < dist(v) then dist(v) ← dist(u) + wuv {// dist(v) is reset to the smaller value //} pred(v) ← u end if Moreover, this vertex v is added to the queue (if it is not already in the queue) as a vertex to be examined later. Note that v enters the queue only if dist(v) is decremented as above and if v is currently not in the queue. Observe that unlike in Dijkstra’s method (the label-setting method) a vertex may enter (and leave) the queue several times—each time a shorter path is discovered. It is easy to see that the label-correcting algorithm will not terminate if the network has a cycle of negative weight.

4.7.3

All-Pairs Shortest Paths

We will now consider the problem of ﬁnding a shortest path between every pair of vertices in the network. Clearly, in an n-vertex directed graph there are n(n − 1) such paths—one for each ordered pair of distinct vertices—and n(n − 1)/2 paths in an undirected graph. One could, of course, solve this problem by repeated application of Dijkstra’s algorithm, once for each vertex in the network taken as the source vertex s. We will instead consider a diﬀerent algorithm for ﬁnding shortest paths between all pairs of vertices, which is known as Warshall-Floyd algorithm. It requires computation time proportional to n3 , and allows some of the edges to have negative weights, as long as no cycles of net negative weight exist. The algorithm works by inserting one or more vertices into paths, whenever it is advantageous to do so. Starting with n × n weight matrix W = [wij ] of direct distances between the vertices of the given network G, we construct a sequence of n matrices W (1) , W (2) , . . . , W (n) . (l) Matrix W (1) , 1 ≤ l ≤ n, may be thought of as the matrix whose (i, j)th entry w ij gives the length of the shortest path among all paths from i to j with vertices 1, 2, . . . , l allowed (l) as intermediate vertices. Matrix W (l) = w ij is constructed as follows: w w

(l) ij

= min{w

(0) ij

(l−1) (l−1) , w il ij

= wij

+w

(l−1) } lj

for l = 1, 2, . . . , n

(4.1)

In other words, in iteration 1, vertex 1 is inserted in the path from vertex i to vertex j if wij > wi1 + w1j . In iteration 2, vertex 2 can be inserted, and so on. For example, in Figure 4.6 the shortest path from vertex 2 to 4 is 2–1–3–4; and the following replacements occur: Iteration 1 : w

(0) 23

is replaced by (w

(0) 21

+w

(0) 13 )

Iteration 2 : w

(2) 24

is replaced by (w

(2) 23

+w

(2) 34 )

(3)

Once the shortest distance is obtained in w 23 , the value of this entry will not be altered in subsequent operations. We assume as usual that the weight of a nonexistent edge is ∞, that x+∞ = ∞, and that min{x, ∞} = x for all x. It can easily be seen that all distance matrices W (l) calculated from (4.1) can be overwritten on W itself. The algorithm may be stated as follows:

© 2005 by Chapman & Hall/CRC

Graphs

4-23

for l ← 1 to n do for i ← 1 to n do if wil = ∞ then for j ← 1 to n do wij ← min{wij , wil + wlj } end for end if end for end for FIGURE 4.20: All-pairs shortest distance algorithm.

If the network has no negative-weight cycle, the diagonal entries w

(n) ii

represent the length (n)

of shortest cycles passing through vertex i. The oﬀ-diagonal entries w ij are the shortest distances. Notice that negative weight of an individual edge has no eﬀect on this algorithm as long as there is no cycle with a net negative weight. Note that the algorithm in Figure 4.20 does not actually list the paths, it only produces their costs or weights. Obtaining paths is slightly more involved than it was in algorithm in Figure 4.19 where a predecessor array pred was suﬃcient. Here the paths can be constructed from a path matrix P = [pij ] (also called optimal policy matrix ), in which pij is the second to the last vertex along the shortest path from i to j—the last vertex being j. The path matrix P is easily calculated by adding the following steps in Figure 4.20. Initially, we set pij ← i, if wij = ∞, and pij ← 0, if wij = ∞. In the lth iteration if vertex l is inserted between i and j; that is, if wil + wlj < wij , then we set pij ← plj . At the termination of the execution, the shortest path (i, v1 , v2 , . . . , vq , j) from i to j can be obtained from matrix P as follows:

vq = pij vq−1 = pi,vq vq−2 = pi,vq−1 .. . i = pi,v1

The storage requirement is n2 , no more than for storing the weight matrix itself. Since all the intermediate matrices as well as the ﬁnal distance matrix are overwritten on W itself. Another n2 storage space would be required if we generated the path matrix P also. The computation time for the algorithm in Figure 4.20 is clearly O(n3 ), regardless of the number of edges in the network.

© 2005 by Chapman & Hall/CRC

4-24

4.8

Handbook of Data Structures and Applications

Eulerian and Hamiltonian Graphs

A path when generalized to include visiting a vertex more than once is called a trail. In other words, a trail is a sequence of edges (v1 , v2 ), (v2 , v3 ),. . ., (vk−2 , vk−1 ), (vk−1 , vk ) in which all the vertices (v1 , v2 , . . . , vk ) may not be distinct but all the edges are distinct. Sometimes a trail is referred to as a (non-simple) path and path is referred to as a simple path. For example in Figure 4.8(a) (b, a), (a, c), (c, d), (d, a), (a, f ) is a trail (but not a simple path because vertex a is visited twice. If the ﬁrst and the last vertex in a trail are the same, it is called a closed trail , otherwise an open trail . An Eulerian trail in a graph G = (V, E) is one that includes every edge in E (exactly once). A graph with a closed Eulerian trail is called a Eulerian graph. Equivalently, in an Eulerian graph, G, starting from a vertex one can traverse every edge in G exactly once and return to the starting vertex. According to a theorem proved by Euler in 1736, (considered the beginning of graph theory), a connected graph is Eulerian if and only if the degree of its every vertex is even. Given a connected graph G it is easy to check if G is Eulerian. Finding an actual Eulerian trail of G is more involved. An eﬃcient algorithm for traversing the edges of G to obtain an Euler trail was given by Fleury. The details can be found in [20]. A cycle in a graph G is said to be Hamiltonian if it passes through every vertex of G. Many families of special graphs are known to be Hamiltonian, and a large number of theorems have been proved that give suﬃcient conditions for a graph to be Hamiltonian. However, the problem of determining if an arbitrary graph is Hamiltonian is NP-complete. Graph theory, a branch of combinatorial mathematics, has been studied for over two centuries. However, its applications and algorithmic aspects have made enormous advances only in the past ﬁfty years with the growth of computer technology and operations research. Here we have discussed just a few of the better-known problems and algorithms. Additional material is available in the references provided. In particular, for further exploration the Stanford GraphBase [10], the LEDA [12], and the Graph Boost Library [17] provide valuable and interesting platforms with collection of graph-processing programs and benchmark databases.

Acknowledgment The author gratefully acknowledges the help provided by Hemant Balakrishnan in preparing this chapter.

References [1] R. K. Ahuja, T. L. Magnanti, and J. B. Orlin, Network Flows: Theory, Algorithms, and Applications, Prentice Hall, 1993. [2] B. Chazelle, “A minimum spanning tree algorithm with inverse Ackermann type complexity,” Journal of the ACM, Vol. 47, pp. 1028-1047, 2000. [3] T. H. Cormen, C. L. Leiserson, and R. L. Rivest, Introduction to Algorithms, MIT Press and McGraw-Hill, 1990. [4] N. Deo, Graph Theory with Applications in Engineering and Computer Science, Prentice Hall, 1974. [5] N. Deo and C. Pang, “Shortest Path Algorithms: Taxonomy and Annotation,” Networks, Vol. 14, pp. 275-323, 1984. [6] N. Deo and N. Kumar, “Constrained spanning tree problem: approximate methods and parallel computation,” American Math Society, Vol. 40, pp. 191-217, 1998

© 2005 by Chapman & Hall/CRC

Graphs [7] H. N. Gabow,“Path-based depth-ﬁrst search for strong and biconnected components,” Information Processing, Vol. 74, pp. 107-114, 2000. [8] R. L. Graham and P. Hell, “On the history of minimum spanning tree problem,” Annals of the History of Computing, Vol. 7, pp. 43-57, 1985. [9] E. Horowitz, S. Sahni, and B. Rajasekaran, Computer Algorithms/C++, Computer Science Press, 1996. [10] D. E. Knuth, The Stanford GraphBase: A Platform for Combinatorial Computing, Addison-Wesley, 1993. [11] K. Mehlhorn, Data Structures and Algorithms 2: NP-Completeness and Graph Algorithms, Springer-Verlag, 1984. [12] K. Mehlhorn and S. Naher, LEDA: A platform for combinatorial and Geometric Computing, Cambridge University Press, 1999. [13] B. M. E. Moret and H. D. Shapiro, “An empirical analysis of algorithms for constructing minimum spanning tree,” Lecture Notes in Computer Science, Vol. 519, pp. 400-411, 1991. [14] C. H. Papadimitriou and K. Steiglitz, Combinatorial Optimization: Algorithms and Complexity, Prentice-Hall, 1982. [15] E. M. Reingold, J. Nievergelt, and N. Deo, Combinatorial Algorithms: Theory and Practice, Prentice-Hall, 1977. [16] R. Sedgewick, Algorithms in C: Part 5 Graph Algorithms, Addison-Wesley, third edition, 2002. [17] J. G. Siek, L. Lee, and A. Lumsdaine, The Boost Graph Library - User Guide and Reference Manual, Addison Wesley, 2002. [18] M. M. Syslo, N. Deo, and J. S. Kowalik, Discrete Optimization Algorithms : with Pascal Programs, Prentice-hall, 1983. [19] R. E. Tarjan, Data Structures and Network Algorithms, Society for Industrial and Applied Mathematics, 1983. [20] K. Thulasiraman and M. N. S. Swamy, Graphs: Theory and Algorithms, WileyInterscience, 1992.

© 2005 by Chapman & Hall/CRC

4-25

II Priority Queues 5 Leftist Trees Introduction

6 Skew Heaps

•

Sartaj Sahni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Height-Biased Leftist Trees

•

C. Pandu Rangan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction • Basics of Amortized Analysis Heaps • Bibliographic Remarks

•

Michael L. Fredman . . . . . .

Introduction • Binomial Heaps • Fibonacci Heaps • Pairing Heaps Summaries of the Algorithms • Related Developments

•

7-1

Pseudocode

Sartaj Sahni . . . . . . . . . . . . . . . . . . . . . . . .

Deﬁnition and an Application • Symmetric Min-Max Heaps • Interval Heaps Max Heaps • Deaps • Generic Methods for DEPQs • Meldable DEPQs

© 2005 by Chapman & Hall/CRC

6-1

Meldable Priority Queues and Skew

7 Binomial, Fibonacci, and Pairing Heaps

8 Double-Ended Priority Queues

5-1

Weight-Biased Leftist Trees

•

Min-

8-1

5 Leftist Trees 5.1 5.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Height-Biased Leftist Trees . . . . . . . . . . . . . . . . . . . . . . .

5-1 5-2

Deﬁnition • Insertion into a Max HBLT • Deletion of Max Element from a Max HBLT • Melding Two Max HBLTs • Initialization • Deletion of Arbitrary Element from a Max HBLT

Sartaj Sahni University of Florida

5.1

5.3

Weight-Biased Leftist Trees . . . . . . . . . . . . . . . . . . . . . . . Deﬁnition

•

5-8

Max WBLT Operations

Introduction

A single-ended priority queue (or simply, a priority queue) is a collection of elements in which each element has a priority. There are two varieties of priority queues—max and min. The primary operations supported by a max (min) priority queue are (a) ﬁnd the element with maximum (minimum) priority, (b) insert an element, and (c) delete the element whose priority is maximum (minimum). However, many authors consider additional operations such as (d) delete an arbitrary element (assuming we have a pointer to the element), (e) change the priority of an arbitrary element (again assuming we have a pointer to this element), (f) meld two max (min) priority queues (i.e., combine two max (min) priority queues into one), and (g) initialize a priority queue with a nonzero number of elements. Several data structures: e.g., heaps (Chapter 3), leftist trees [2, 5], Fibonacci heaps [7] (Chapter 7), binomial heaps [1] (Chapter 7), skew heaps [11] (Chapter 6), and pairing heaps [6] (Chapter 7) have been proposed for the representation of a priority queue. The diﬀerent data structures that have been proposed for the representation of a priority queue diﬀer in terms of the performance guarantees they provide. Some guarantee good performance on a per operation basis while others do this only in the amortized sense. Max (min) heaps permit one to delete the max (min) element and insert an arbitrary element into an n element priority queue in O(log n) time per operation; a ﬁnd max (min) takes O(1) time. Additionally, a heap is an implicit data structure that has no storage overhead associated with it. All other priority queue structures are pointer-based and so require additional storage for the pointers. Max (min) leftist trees also support the insert and delete max (min) operations in O(log n) time per operation and the ﬁnd max (min) operation in O(1) time. Additionally, they permit us to meld pairs of priority queues in logarithmic time. The remaining structures do not guarantee good complexity on a per operation basis. They do, however, have good amortized complexity. Using Fibonacci heaps, binomial queues, or skew heaps, ﬁnd max (min), inserts and melds take O(1) time (actual and amortized) and a delete max (min) takes O(log n) amortized time. When a pairing heap is

5-1

© 2005 by Chapman & Hall/CRC

5-2

Handbook of Data Structures and Applications

a

f b

(a) A binary tree

1 1

1 0

e

5

1

0

d

(b) Extended binary tree

2

0

c

0

2 0

2 1

1

0

(c) s values

(d) w values FIGURE 5.1: s and w values.

used, the amortized complexity is O(1) for ﬁnd max (min) and insert (provided no decrease key operations are performed) and O(logn) for delete max (min) operations [12]. Jones [8] gives an empirical evaluation of many priority queue data structures. In this chapter, we focus on the leftist tree data structure. Two varieties of leftist trees– height-biased leftist trees [5] and weight-biased leftist trees [2] are described. Both varieties of leftist trees are binary trees that are suitable for the representation of a single-ended priority queue. When a max (min) leftist tree is used, the traditional single-ended priority queue operations– ﬁnd max (min) element, delete/remove max (min) element, and insert an element–take, respectively, O(1), O(log n) and O(log n) time each, where n is the number of elements in the priority queue. Additionally, an n-element max (min) leftist tree can be initialized in O(n) time and two max (min) leftist trees that have a total of n elements may be melded into a single max (min) leftist tree in O(log n) time.

5.2 5.2.1

Height-Biased Leftist Trees Deﬁnition

Consider a binary tree in which a special node called an external node replaces each empty subtree. The remaining nodes are called internal nodes. A binary tree with external nodes added is called an extended binary tree. Figure 5.1(a) shows a binary tree. Its corresponding extended binary tree is shown in Figure 5.1(b). The external nodes appear as shaded boxes. These nodes have been labeled a through f for convenience. Let s(x) be the length of a shortest path from node x to an external node in its subtree. From the deﬁnition of s(x), it follows that if x is an external node, its s value is 0.

© 2005 by Chapman & Hall/CRC

Leftist Trees

5-3

Furthermore, if x is an internal node, its s value is min{s(L), s(R)} + 1 where L and R are, respectively, the left and right children of x. The s values for the nodes of the extended binary tree of Figure 5.1(b) appear in Figure 5.1(c). [Crane [5]] A binary tree is a height-biased leftist tree (HBLT) iﬀ at every internal node, the s value of the left child is greater than or equal to the s value of the right child.

DEFINITION 5.1

The binary tree of Figure 5.1(a) is not an HBLT. To see this, consider the parent of the external node a. The s value of its left child is 0, while that of its right is 1. All other internal nodes satisfy the requirements of the HBLT deﬁnition. By swapping the left and right subtrees of the parent of a, the binary tree of Figure 5.1(a) becomes an HBLT. THEOREM 5.1

Let x be any internal node of an HBLT.

(a) The number of nodes in the subtree with root x is at least 2s(x) − 1. (b) If the subtree with root x has m nodes, s(x) is at most log2 (m + 1). (c) The length, rightmost(x), of the right-most path from x to an external node (i.e., the path obtained by beginning at x and making a sequence of right-child moves) is s(x). Proof From the deﬁnition of s(x), it follows that there are no external nodes on the s(x) − 1 levels immediately below node x (as otherwise the s value of x would be less). The subtree with root x has exactly one node on the level at which x is, two on the next level, four on the next, · · · , and 2s(x)−1 nodes s(x) − 1 levels below x. The subtree may have additional nodes at levels more than s(x) − 1 below x. Hence the number of nodes in the s(x)−1 subtree x is at least i=0 2i = 2s(x) − 1. Part (b) follows from (a). Part (c) follows from the deﬁnition of s and the fact that, in an HBLT, the s value of the left child of a node is always greater than or equal to that of the right child. DEFINITION 5.2 A max tree (min tree) is a tree in which the value in each node is greater (less) than or equal to those in its children (if any).

Some max trees appear in Figure 5.2, and some min trees appear in Figure 5.3. Although these examples are all binary trees, it is not necessary for a max tree to be binary. Nodes of a max or min tree may have an arbitrary number of children. DEFINITION 5.3 A max HBLT is an HBLT that is also a max tree. A min HBLT is an HBLT that is also a min tree.

The max trees of Figure 5.2 as well as the min trees of Figure 5.3 are also HBLTs; therefore, the trees of Figure 5.2 are max HBLTs, and those of Figure 5.3 are min HBLTs. A max priority queue may be represented as a max HBLT, and a min priority queue may be represented as a min HBLT.

© 2005 by Chapman & Hall/CRC

5-4

Handbook of Data Structures and Applications

14

9

12 10

7 8

6

6

30 25

5

(a)

(b)

(c)

FIGURE 5.2: Some max trees.

2

10

7 10

4 8

6 (a)

20

11 21

50 (b)

(c)

FIGURE 5.3: Some min trees.

5.2.2

Insertion into a Max HBLT

The insertion operation for max HBLTs may be performed by using the max HBLT meld operation, which combines two max HBLTs into a single max HBLT. Suppose we are to insert an element x into the max HBLT H. If we create a max HBLT with the single element x and then meld this max HBLT and H, the resulting max HBLT will include all elements in H as well as the element x. Hence an insertion may be performed by creating a new max HBLT with just the element that is to be inserted and then melding this max HBLT and the original.

5.2.3

Deletion of Max Element from a Max HBLT

The max element is in the root. If the root is deleted, two max HBLTs, the left and right subtrees of the root, remain. By melding together these two max HBLTs, we obtain a max HBLT that contains all elements in the original max HBLT other than the deleted max element. So the delete max operation may be performed by deleting the root and then melding its two subtrees.

5.2.4

Melding Two Max HBLTs

Since the length of the right-most path of an HBLT with n elements is O(log n), a meld algorithm that traverses only the right-most paths of the HBLTs being melded, spending O(1) time at each node on these two paths, will have complexity logarithmic in the number of elements in the resulting HBLT. With this observation in mind, we develop a meld algorithm that begins at the roots of the two HBLTs and makes right-child moves only. The meld strategy is best described using recursion. Let A and B be the two max HBLTs that are to be melded. If one is empty, then we may use the other as the result. So assume that neither is empty. To perform the meld, we compare the elements in the two roots. The root with the larger element becomes the root of the melded HBLT. Ties may be broken

© 2005 by Chapman & Hall/CRC

Leftist Trees

5-5

arbitrarily. Suppose that A has the larger root and that its left subtree is L. Let C be the max HBLT that results from melding the right subtree of A and the max HBLT B. The result of melding A and B is the max HBLT that has A as its root and L and C as its subtrees. If the s value of L is smaller than that of C, then C is the left subtree. Otherwise, L is. Example 5.1

Consider the two max HBLTs of Figure 5.4(a). The s value of a node is shown outside the node, while the element value is shown inside. When drawing two max HBLTs that are to be melded, we will always draw the one with larger root value on the left. Ties are broken arbitrarily. Because of this convention, the root of the left HBLT always becomes the root of the ﬁnal HBLT. Also, we will shade the nodes of the HBLT on the right. Since the right subtree of 9 is empty, the result of melding this subtree of 9 and the tree with root 7 is just the tree with root 7. We make the tree with root 7 the right subtree of 9 temporarily to get the max tree of Figure 5.4(b). Since the s value of the left subtree of 9 is 0 while that of its right subtree is 1, the left and right subtrees are swapped to get the max HBLT of Figure 5.4(c). Next consider melding the two max HBLTs of Figure 5.4(d). The root of the left subtree becomes the root of the result. When the right subtree of 10 is melded with the HBLT with root 7, the result is just this latter HBLT. If this HBLT is made the right subtree of 10, we get the max tree of Figure 5.4(e). Comparing the s values of the left and right children of 10, we see that a swap is not necessary. Now consider melding the two max HBLTs of Figure 5.4(f). The root of the left subtree is the root of the result. We proceed to meld the right subtree of 18 and the max HBLT with root 10. The two max HBLTs being melded are the same as those melded in Figure 5.4(d). The resultant max HBLT (Figure 5.4(e)) becomes the right subtree of 18, and the max tree of Figure 5.4(g) results. Comparing the s values of the left and right subtrees of 18, we see that these subtrees must be swapped. Swapping results in the max HBLT of Figure 5.4(h). As a ﬁnal example, consider melding the two max HBLTs of Figure 5.4(i). The root of the left max HBLT becomes the root of the result. We proceed to meld the right subtree of 40 and the max HBLT with root 18. These max HBLTs were melded in Figure 5.4(f). The resultant max HBLT (Figure 5.4(g)) becomes the right subtree of 40. Since the left subtree of 40 has a smaller s value than the right has, the two subtrees are swapped to get the max HBLT of Figure 5.4(k). Notice that when melding the max HBLTs of Figure 5.4(i), we ﬁrst move to the right child of 40, then to the right child of 18, and ﬁnally to the right child of 10. All moves follow the right-most paths of the initial max HBLTs.

5.2.5

Initialization

It takes O(n log n) time to initialize a max HBLT with n elements by inserting these elements into an initially empty max HBLT one at a time. To get a linear time initialization algorithm, we begin by creating n max HBLTs with each containing one of the n elements. These n max HBLTs are placed on a FIFO queue. Then max HBLTs are deleted from this queue in pairs, melded, and added to the end of the queue until only one max HBLT remains. Example 5.2

We wish to create a max HBLT with the ﬁve elements 7, 1, 9, 11, and 2. Five singleelement max HBLTs are created and placed in a FIFO queue. The ﬁrst two, 7 and 1,

© 2005 by Chapman & Hall/CRC

5-6

Handbook of Data Structures and Applications

1

1

9

1

7

1

9 7

(a) 1 1

7

10 1

5

1

2 10

1

2

5

2

7

7

1

18 7

6

1

1

2 6

5

7

1

1

1 1

30

10

1

20

18 1 1

2

20 5

2 6

7

1

7

1

(i)

2

10

6

2

5

2 18

5

40

40

30

1

1 1

10

(f)

(h) 2

1

1

1

18

10

(g)

1

2

(e)

18

6

7 (c)

2

5

(d) 2

1

(b)

1

10

1

9

1

2 1

18

30

10

5

(j)

40

6 7

1 1

1

20

1 (k)

FIGURE 5.4: Melding max HBLTs.

are deleted from the queue and melded. The result (Figure 5.5(a)) is added to the queue. Next the max HBLTs 9 and 11 are deleted from the queue and melded. The result appears in Figure 5.5(b). This max HBLT is added to the queue. Now the max HBLT 2 and that of Figure 5.5(a) are deleted from the queue and melded. The resulting max HBLT (Figure 5.5(c)) is added to the queue. The next pair to be deleted from the queue consists of the max HBLTs of Figures Figure 5.5 (b) and (c). These HBLTs are melded to get the max HBLT of Figure 5.5(d). This max HBLT is added to the queue. The queue now has just one max HBLT, and we are done with the initialization.

© 2005 by Chapman & Hall/CRC

Leftist Trees

5-7

7 1

11 9

7

11 2

1

7 1

(a)

(b)

(c)

9 2

(d)

FIGURE 5.5: Initializing a max HBLT. For the complexity analysis of of the initialization operation, assume, for simplicity, that n is a power of 2. The ﬁrst n/2 melds involve max HBLTs with one element each, the next n/4 melds involve max HBLTs with two elements each; the next n/8 melds are with trees that have four elements each; and so on. The time needed to meld two leftist trees with 2i elements each is O(i + 1), and so the total time for the initialization is O(n/2 + 2 ∗ (n/4) + 3 ∗ (n/8) + · · · ) = O(n

5.2.6

i ) = O(n) 2i

Deletion of Arbitrary Element from a Max HBLT

Although deleting an element other than the max (min) element is not a standard operation for a max (min) priority queue, an eﬃcient implementation of this operation is required when one wishes to use the generic methods of Cho and Sahni [3] and Chong and Sahni [4] to derive eﬃcient mergeable double-ended priority queue data structures from eﬃcient singleended priority queue data structures. From a max or min leftist tree, we may remove the element in any speciﬁed node theN ode in O(log n) time, making the leftist tree a suitable base structure from which an eﬃcient mergeable double-ended priority queue data structure may be obtained [3, 4]. To remove the element in the node theN ode of a height-biased leftist tree, we must do the following: 1. Detach the subtree rooted at theN ode from the tree and replace it with the meld of the subtrees of theN ode. 2. Update s values on the path from theN ode to the root and swap subtrees on this path as necessary to maintain the leftist tree property. To update s on the path from theN ode to the root, we need parent pointers in each node. This upward updating pass stops as soon as we encounter a node whose s value does not change. The changed s values (with the exception of possibly O(log n) values from moves made at the beginning from right children) must form an ascending sequence (actually, each must be one more than the preceding one). Since the maximum s value is O(log n) and since all s values are positive integers, at most O(log n) nodes are encountered in the updating pass. At each of these nodes, we spend O(1) time. Therefore, the overall complexity of removing the element in node theN ode is O(log n).

© 2005 by Chapman & Hall/CRC

5-8

5.3 5.3.1

Handbook of Data Structures and Applications

Weight-Biased Leftist Trees Deﬁnition

We arrive at another variety of leftist tree by considering the number of nodes in a subtree, rather than the length of a shortest root to external node path. Deﬁne the weight w(x) of node x to be the number of internal nodes in the subtree with root x. Notice that if x is an external node, its weight is 0. If x is an internal node, its weight is 1 more than the sum of the weights of its children. The weights of the nodes of the binary tree of Figure 5.1(a) appear in Figure 5.1(d) DEFINITION 5.4 [Cho and Sahni [2]] A binary tree is a weight-biased leftist tree (WBLT) iﬀ at every internal node the w value of the left child is greater than or equal to the w value of the right child. A max (min) WBLT is a max (min) tree that is also a WBLT.

Note that the binary tree of Figure 5.1(a) is not a WBLT. However, all three of the binary trees of Figure 5.2 are WBLTs. Let x be any internal node of a weight-biased leftist tree. The length, rightmost(x), of the right-most path from x to an external node satisﬁes

THEOREM 5.2

rightmost(x) ≤ log2 (w(x) + 1). Proof The proof is by induction on w(x). When w(x) = 1, rightmost(x) = 1 and log2 (w(x) + 1) = log2 2 = 1. For the induction hypothesis, assume that rightmost(x) ≤ log2 (w(x)+1) whenever w(x) < n. Let RightChild(x) denote the right child of x (note that this right child may be an external node). When w(x) = n, w(RightChild(x)) ≤ (n − 1)/2 and rightmost(x) = 1 + rightmost(RightChild(x)) ≤ 1 + log2 ((n − 1)/2 + 1) = 1 + log2 (n + 1) − 1 = log2 (n + 1).

5.3.2

Max WBLT Operations

Insert, delete max, and initialization are analogous to the corresponding max HBLT operation. However, the meld operation can be done in a single top-to-bottom pass (recall that the meld operation of an HBLT performs a top-to-bottom pass as the recursion unfolds and then a bottom-to-top pass in which subtrees are possibly swapped and s-values updated). A single-pass meld is possible for WBLTs because we can determine the w values on the way down and so, on the way down, we can update w-values and swap subtrees as necessary. For HBLTs, a node’s new s value cannot be determined on the way down the tree. Since the meld operation of a WBLT may be implemented using a single top-to-bottom pass, inserts and deletes also use a single top-to-bottom pass. Because of this, inserts and deletes are faster, by a constant factor, in a WBLT than in an HBLT [2]. However, from a WBLT, we cannot delete the element in an arbitrarily located node, theN ode, in O(log n) time. This is because theN ode may have O(n) ancestors whose w value is to be updated. So, WBLTs are not suitable for mergeable double-ended priority queue applications [3, 8]. C++ and Java codes for HBLTs and WBLTs may be obtained from [9] and [10], respectively.

© 2005 by Chapman & Hall/CRC

Leftist Trees

5-9

Acknowledgment This work was supported, in part, by the National Science Foundation under grant CCR9912395.

References [1] M. Brown, Implementation and analysis of binomial queue algorithms, SIAM Jr. on Computing, 7, 3, 1978, 298-319. [2] S. Cho and S. Sahni, Weight biased leftist trees and modiﬁed skip lists, ACM Jr. on Experimental Algorithmics, Article 2, 1998. [3] S. Cho and S. Sahni, Mergeable double-ended priority queues. International Journal on Foundations of Computer Science, 10, 1, 1999, 1-18. [4] K. Chong and S. Sahni, Correspondence based data structures for double ended priority queues. ACM Jr. on Experimental Algorithmics, Volume 5, 2000, Article 2, 22 pages. [5] C. Crane, Linear Lists and Priority Queues as Balanced Binary Trees, Tech. Rep. CS-72-259, Dept. of Comp. Sci., Stanford University, 1972. [6] M. Fredman, R. Sedgewick, D. Sleator, and R.Tarjan, The pairing heap: A new form of self-adjusting heap. Algorithmica, 1, 1986, 111-129. [7] M. Fredman and R. Tarjan, Fibonacci Heaps and Their Uses in Improved Network Optimization Algorithms, JACM, 34, 3, 1987, 596-615. [8] D. Jones, An empirical comparison of priority-queue and event-set implementations, Communications of the ACM, 29, 4, 1986, 300-311. [9] S. Sahni, Data Structures, Algorithms, and Applications in C++, McGraw-Hill, NY, 1998, 824 pages. [10] S. Sahni, Data Structures, Algorithms, and Applications in Java, McGraw-Hill, NY, 2000, 846 pages. [11] D. Sleator and R. Tarjan, Self-adjusting heaps, SIAM Jr. on Computing, 15, 1, 1986, 52-69. [12] J. Stasko and J. Vitter, Pairing heaps: Experiments and analysis, Communications of the ACM, 30, 3, 1987, 234-249.

© 2005 by Chapman & Hall/CRC

6 Skew Heaps 6.1 6.2 6.3

Meldable Priority Queue Operations Cost of Meld Operation

C. Pandu Rangan Indian Institute of Technology, Madras

6.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basics of Amortized Analysis . . . . . . . . . . . . . . . . . . . . . Meldable Priority Queues and Skew Heaps . . . . .

6.4

•

6-1 6-2 6-5

Amortized

Bibliographic Remarks . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-9

Introduction

Priority Queue is one of the most extensively studied Abstract Data Types (ADT) due to its fundamental importance in the context of resource managing systems, such as operating systems. Priority Queues work on ﬁnite subsets of a totally ordered universal set U . Without any loss of generality we assume that U is simply the set of all non-negative integers. In its simplest form, a Priority Queue supports two operations, namely, • insert(x, S) : update S by adding an arbitrary x ∈ U to S. • delete-min(S) : update S by removing from S the minimum element of S. We will assume for the sake of simplicity, all the items of S are distinct. Thus, we assume that x ∈ S at the time of calling insert(x, S). This increases the cardinality of S, denoted usually by |S|, by one. The well-known data structure Heaps, provide an elegant and eﬃcient implementation of Priority Queues. In the Heap based implementation, both insert(x, S) and delete-min(S) take O(log n) time where n = |S|. Several extensions for the basic Priority Queues were proposed and studied in response to the needs arising in several applications. For example, if an operating system maintains a set of jobs, say print requests, in a priority queue, then, always, the jobs with ‘high priority’ are serviced irrespective of when the job was queued up. This might mean some kind of ‘unfairness’ for low priority jobs queued up earlier. In order to straighten up the situation, we may extend priority queue to support delete-max operation and arbitrarily mix delete-min and delete-max operations to avoid any undue stagnation in the queue. Such priority queues are called Double Ended Priority Queues. It is easy to see that Heap is not an appropriate data structure for Double Ended Priority Queues. Several interesting alternatives are available in the literature [1] [3] [4]. You may also refer Chapter 8 of this handbook for a comprehensive discussion on these structures. In another interesting extension, we consider adding an operation called melding. A meld operation takes two disjoint sets, S1 and S2 , and produces the set S = S1 ∪ S2 . In terms of an implementation, this requirement translates to building a data structure for S, given

6-1

© 2005 by Chapman & Hall/CRC

6-2

Handbook of Data Structures and Applications

the data structures of S1 and S2 . A Priority Queue with this extension is called a Meldable Priority Queue. Consider a scenario where an operating system maintains two diﬀerent priority queues for two printers and one of the printers is down with some problem during operation. Meldable Priority Queues naturally model such a situation. Again, maintaining the set items in Heaps results in very ineﬃcient implementation of Meldable Priority Queues. Speciﬁcally, designing a data structure with O(log n) bound for each of the Meldable Priority Queue operations calls for more sophisticated ideas and approaches. An interesting data structure called Leftist Trees, implements all the operations of Meldable Priority Queues in O(log n) time. Leftist Trees are discussed in Chapter 5 of this handbook. The main objective behind the design of a data structure for an ADT is to implement the ADT operations as eﬃciently as possible. Typically, eﬃciency of a structure is judged by its worst-case performance. Thus, when designing a data structure, we seek to minimize the worst case complexity of each operation. While this is a most desirable goal and has been theoretically realized for a number of data structures for key ADTs, the data structures optimizing worst-case costs of ADT operations are often very complex and pretty tedious to implement. Hence, computer scientists were exploring alternative design criteria that would result in simpler structures without losing much in terms of performance. In Chapter 13 of this handbook, we show that incorporating randomness provides an attractive alternative avenue for designers of the data structures. In this chapter we will explore yet another design goal leading to simpler structural alternatives without any degrading in overall performance. Since the data structures are used as basic building blocks for implementing algorithms, a typical execution of an algorithm might consist of a sequence of operations using the data structure over and again. In the worst case complexity based design, we seek to reduce the cost of each operation as much as possible. While this leads to an overall reduction in the cost for the sequence of operations, this poses some constraints on the designer of data structure. We may relax the requirement that the cost of each operation be minimized and perhaps design data structures that seek to minimize the total cost of any sequence of operations. Thus, in this new kind of design goal, we will not be terribly concerned with the cost of any individual operations, but worry about the total cost of any sequence of operations. At ﬁrst thinking, this might look like a formidable goal as we are attempting to minimize the cost of an arbitrary mix of ADT operations and it may not even be entirely clear how this design goal could lead to simpler data structures. Well, it is typical of a novel and deep idea; at ﬁrst attempt it may puzzle and bamboozle the learner and with practice one tends to get a good intuitive grasp of the intricacies of the idea. This is one of those ideas that requires some getting used to. In this chapter, we discuss about a data structure called Skew heaps. For any sequence of a Meldable Priority Queue operations, its total cost on Skew Heaps is asymptotically same as its total cost on Leftist Trees. However, Skew Heaps are a bit simpler than Leftist Trees.

6.2

Basics of Amortized Analysis

We will now clarify the subtleties involved in the new design goal with an example. Consider a typical implementation of Dictionary operations. The so called Balanced Binary Search Tree structure (BBST) implements these operations in O(m log n) worst case bound. Thus, the total cost of an arbitrary sequence of m dictionary operations, each performed on a tree of size at most n, will be O(log n). Now we may turn around and ask: Is there a data structure on which the cost of a sequence of m dictionary operations is O(m log n) but

© 2005 by Chapman & Hall/CRC

Skew Heaps

6-3

individual operations are not constrained to have O(log n) bound? Another more pertinent question to our discussion - Is that structure simpler than BBST, at least in principle? An aﬃrmative answer to both the questions is provided by a data structure called Splay Trees. Splay Tree is the theme of Chapter 12 of this handbook. Consider for example a sequence of m dictionary operations S1 , S2 , ..., Sm , performed using a BBST. Assume further that the size of the tree has never exceeded n during the sequence of operations. It is also fairly reasonable to assume that we begin with an empty tree and this would imply n ≤ m. Let the actual cost of executing Si be Ci . Then the total cost of the sequence of operations is C1 + C2 + · · · + Cm . Since each Ci is O(log n) we easily conclude that the total cost is O(m log n). No big arithmetic is needed and the analysis is easily ﬁnished. Now, assume that we execute the same sequence of m operations but employ a Splay Tree in stead of a BBST. Assuming that ci is the actual cost of Si in a Splay Tree, the total cost for executing the sequence of operation turns out to be c1 + c2 + . . . + cm . This sum, however, is tricky to compute. This is because a wide range of values are possible for each of ci and no upper bound other than the trivial bound of O(n) is available for ci . Thus, a naive, worst case cost analysis would yield only a weak upper bound of O(nm) whereas the actual bound is O(m log n). But how do we arrive at such improved estimates? This is where we need yet another powerful tool called potential function. The potential function is purely a conceptual entity and this is introduced only for the sake of computing a sum of widely varying quantities in a convenient way. Suppose there is a function f : D → R+ ∪ {0}, that maps a conﬁguration of the data structure to a non-negative real number. We shall refer to this function as potential function. Since the data type as well as data structures are typically dynamic, an operation may change the conﬁguration of data structure and hence there may be change of potential value due to this change of conﬁguration. Referring back to our sequence of operations S1 , S2 , . . . , Sm , let Di−1 denote the conﬁguration of data structure before the executing the operation Si and Di denote the conﬁguration after the execution of Si . The potential diﬀerence due to this operation is deﬁned to be the quantity f (Di ) − f (Di−1 ). Let ci denote the actual cost of Si . We will now introduce yet another quantity, ai , deﬁned by ai = ci + f (Di ) − f (Di−1 ). What is the consequence of this deﬁnition? Note that

m

ai =

i=1

m

ci + f (Dm ) − f (D0 ).

i=1

Let us introduce one more reasonable assumption that f (D0 ) = f (φ) = 0. Since f (D) ≥ 0 for all non empty structures, we obtain,

ai =

ci + f (Dm ) ≥

ci

If we are able to choose cleverly a ‘good’ potential function so that ai ’s have tight, uniform bound, then we can evaluate the sum ai easily and this bounds the actual cost sum ci . In other words, we circumvent the diﬃculties posed by wide variations in ci by introducing new quantities ai which have uniform bounds. A very neat idea indeed! However, care must be exercised while deﬁning the potential function. A poor choice of potential function will result in ai s whose sum may be a trivial or useless bound for the sum of actual costs. In fact, arriving at the right potential function is an ingenious task, as you will understand by the end of this chapter or by reading the chapter on Splay Trees.

© 2005 by Chapman & Hall/CRC

6-4

Handbook of Data Structures and Applications

The description of the data structures such as Splay Trees will not look any diﬀerent from the description of a typical data structures - it comprises of a description of the organization of the primitive data items and a bunch of routines implementing ADT operations. The key diﬀerence is that the routines implementing the ADT operations will not be analyzed for their individual worst case complexity. We will only be interested in the the cumulative eﬀect of these routines in an arbitrary sequence of operations. Analyzing the average potential contribution of an operation in an arbitrary sequence of operations is called amortized analysis. In other words, the routines implementing the ADT operations will be analyzed for their amortized cost. Estimating the amortized cost of an operation is rather an intricate task. The major diﬃculty is in accounting for the wide variations in the costs of an operation performed at diﬀerent points in an arbitrary sequence of operations. Although our design goal is inﬂuenced by the costs of sequence of operations, deﬁning the notion of amortized cost of an operation in terms of the costs of sequences of operations leads one nowhere. As noted before, using a potential function to oﬀ set the variations in the actual costs is a neat way of handling the situation. In the next deﬁnition we formalize the notion of amortized cost. [Amortized Cost] Let A be an ADT with basic operations O = {O1 , O2 , · · · , Ok } and let D be a data structure implementing A. Let f be a potential function deﬁned on the conﬁgurations of the data structures to non-negative real number. Assume further that f (Φ) = 0. Let D denote a conﬁguration we obtain if we perform an operation Ok on a conﬁguration D and let c denote the actual cost of performing Ok on D. Then, the amortized cost of Ok operating on D, denoted as a(Ok , D), is given by DEFINITION 6.1

a(Ok , D) = c + f (D ) − f (D) If a(Ok , D) ≤ c g(n) for all conﬁguration D of size n, then we say that the amortized cost of Ok is O(g(n)). Let D be a data structure implementing an ADT and let s1 , s2 , · · · , sm denote an arbitrary sequence of ADT operations on the data structure starting from an empty structure D0 . Let ci denote actual cost of the operation si and Di denote the conﬁguration obtained which si operated on Di−1 , for 1 ≤ i ≤ m. Let ai denote the amortized cost of si operating on Di−1 with respect to an arbitrary potential function. Then, THEOREM 6.1

m i=1

Proof

ci ≤

m

ai .

i=1

Since ai is the amortized cost of si working on the conﬁguration Di−1 , we have ai = a(si , Di−1 ) = ci + f (Di ) − f (Di−1 )

Therefore,

© 2005 by Chapman & Hall/CRC

Skew Heaps

6-5

m

ai

=

i=1

m

ci + (f (Dm ) − f (D0 ))

i=1

= f (Dm ) +

m

ci (since f (D0 ) = 0)

i=1

≥

m

ci

i=1

REMARK 6.1 The potential is to the deﬁnition of amortized cost of function common m m all the ADT operations. Since i=1 ai ≥ i=1 ci holds good for any potential function, a clever choice of the potential function will yield tight upper bound for the sum of actual cost of a sequence of operations.

6.3

Meldable Priority Queues and Skew Heaps

DEFINITION 6.2 [Skew Heaps] A Skew Heap is simply a binary tree. Values are stored in the structure, one per node, satisfying the heap-order property: A value stored at a node is larger than the value stored at its parent, except for the root (as root has no parent). REMARK 6.2 Throughout our discussion, we handle sets with distinct items. Thus a set of n items is represented by a skew heap of n nodes. The minimum of the set is always at the root. On any path starting from the root and descending towards a leaf, the values are in increasing order.

6.3.1

Meldable Priority Queue Operations

Recall that a Meldable Priority queue supports three key operations: insert, delete-min and meld. We will ﬁrst describe the meld operation and then indicate how other two operations can be performed in terms of the meld operation. Let S1 and S2 be two sets and H1 and H2 be Skew Heaps storing S1 and S2 respectively. Recall that S1 ∩ S2 = φ. The meld operation should produce a single Skew Heap storing the values in S1 ∪ S2 . The procedure meld (H1 , H2 ) consists of two phases. In the ﬁrst phase, the two right most paths are merged to obtain a single right most path. This phase is pretty much like the merging algorithm working on sorted sequences. In this phase, the left subtrees of nodes in the right most paths are not disturbed. In the second phase, we simply swap the children of every node on the merged path except for the lowest. This completes the process of melding. Figures 6.1, 6.2 and 6.3 clarify the phases involved in the meld routine. Figure 6.1 shows two Skew Heaps H1 and H2 . In Figure 6.2 we have shown the scenario after the completion of the ﬁrst phase. Notice that right most paths are merged to obtain the right most path of a single tree, keeping the respective left subtrees intact. The ﬁnal

© 2005 by Chapman & Hall/CRC

6-6

Handbook of Data Structures and Applications 5

7

33 35

9

10

15

20

25

23

43

11

40

H2

H1

FIGURE 6.1: Skew Heaps for meld operation.

5

33

43

7

9

35

23

10

20

11

25

15

40

FIGURE 6.2: Rightmost paths are merged. Left subtrees of nodes in the merged path are intact.

Skew Heap is obtained in Figure 6.3. Note that left and right child of every node on the right most path of the tree in Figure 6.2 (except the lowest) are swapped to obtain the ﬁnal Skew Heap.

© 2005 by Chapman & Hall/CRC

Skew Heaps

6-7 5

7

33

35

9

23

10

11

43

20

15

25

40

FIGURE 6.3: Left and right children of nodes (5), (7), (9), (10), (11) of Figure 2 are swapped. Notice that the children of (15) which is the lowest node in the merged path, are not swapped.

It is easy to implement delete-min and insert in terms of the meld operation. Since minimum is always found at the root, delete-min is done by simply removing the root and melding its left subtree and right subtree. To insert an item x in a Skew Heap H1 , we create a Skew Heap H2 consisting of only one node containing x and then meld H1 and H2 . From the above discussion, it is clear that cost of meld essentially determines the cost of insert and delete-min. In the next section, we analyze the amortized cost of meld operation.

6.3.2

Amortized Cost of Meld Operation

At this juncture we are left with the crucial task of identifying a suitable potential function. Before proceeding further, perhaps one should try the implication of certain simple potential functions and experiment with the resulting amortized cost. For example, you may try the function f (D) = number of nodes in D( and discover how ineﬀective it is!). We need some deﬁnitions to arrive at our potential function. DEFINITION 6.3 For any node x in a binary tree, the weight of x, denoted wt(x), is the number of descendants of x, including itself. A non-root node x is said to be heavy if wt(x) > wt(parent(x))/2. A non-root node that is not heavy is called light. The root is neither light nor heavy.

© 2005 by Chapman & Hall/CRC

6-8

Handbook of Data Structures and Applications

The next lemma is an easy consequence of the deﬁnition given above. All logarithms in this section have base 2. LEMMA 6.1 For any node, at most one of its children is heavy. Furthermore, any root to leaf path in a n-node tree contains at most log n light nodes.

[Potential Function] A non-root is called right if it is the right child of its parent; it is called left otherwise. The potential of a skew heap is the number of right heavy node it contains. That is, f (H) = number of right heavy nodes in H. We extend the deﬁnition of potential function to a collection of skew heaps as follows: f (H1 , H2 , · · · , Ht ) = t f (H i ). i=1 DEFINITION 6.4

Here is the key result of this chapter. Let H1 and H2 be two heaps with n1 and n2 nodes respectively. Let n = n1 + n2 . The amortized cost of meld (H1 , H2 ) is O(log n).

THEOREM 6.2

Let h1 and h2 denote the number of heavy nodes in the right most paths of H1 and H2 respectively. The number of light nodes on them will be at most log n1 and log n2 respectively. Since a node other than root is either heavy or light, and there are two root nodes here that are neither heavy or light, the total number of nodes in the right most paths is at most

Proof

2 + h1 + h2 + log n1 + log n2 ≤ 2 + h1 + h2 + 2 log n Thus we get a bound for actual cost c as c ≤ 2 + h1 + h2 + 2 log n

(6.1)

In the process of swapping, the h1 + h2 nodes that were right heavy, will lose their status as right heavy. While they remain heavy, they become left children for their parents hence they do not contribute for the potential of the output tree and this means a drop in potential by h1 + h2 . However, the swapping might have created new heavy nodes and let us say, the number of new heavy nodes created in the swapping process is h3 . First, observe that all these h3 new nodes are attached to the left most path of the output tree. Secondly, by Lemma 6.1, for each one of these right heavy nodes, its sibling in the left most path is a light node. However, the number of light nodes in the left most path of the output tree is less than or equal to log n by Lemma 6.1. Thus h3 ≤ log n . Consequently, the net change in the potential is h3 − h1 − h2 ≤ log n − h1 − h2 . The amortized cost = c + potential diﬀerence ≤ 2 + h1 + h2 + 2 log n + log n − h1 − h2 = 3 log n + 2. Hence, the amortized cost of meld operation is O(log n) and this completes the proof.

© 2005 by Chapman & Hall/CRC

Skew Heaps

6-9

Since insert and delete-min are handled as special cases of meld operation, we conclude THEOREM 6.3 The amortized cost complexity of all the Meldable Priority Queue operations is O(log n) where n is the number of nodes in skew heap or heaps involved in the operation.

6.4

Bibliographic Remarks

Skew Heaps were introduced by Sleator and Tarjan [7]. Leftist Trees have O(log n) worst case complexity for all the Meldable Priority Queue operations but they require heights of each subtree to be maintained as additional information at each node. Skew Heaps are simpler than Leftist Trees in the sense that no additional ’balancing’ information need to be maintained and the meld operation simply swaps the children of the right most path without any constraints and this results in a simpler code. The bound 3 log2 n + 2 for melding was √ signiﬁcantly improved to logφ n( here φ denotes the well-known golden ratio ( 5 + 1)/2 which is roughly 1.6) by using a diﬀerent potential function and an intricate analysis in [6]. Recently, this bound was shown to be tight in [2]. Pairing Heap, introduced by Fredman et al. [5], is yet another self-adjusting heap structure and its relation to Skew Heaps is explored in Chapter 7 of this handbook.

References [1] A. Aravind and C. Pandu Rangan, Symmetric Min-Max heaps: A simple data structure for double-ended priority queue, Information Processing Letters, 69:197-199, 1999. [2] B. Schoenmakers, A tight lower bound for top-down skew heaps, Information Processing Letters, 61:279-284, 1997. [3] S. Carlson, The Deap - A double ended heap to implement a double ended priority queue, Information Processing Letters, 26: 33-36, 1987. [4] S. Chang and M. Du, Diamond dequeue: A simple data structure for priority dequeues, Information Processing Letters, 46:231-237, 1993. [5] M. L. Fredman, R. Sedgewick, D. D. Sleator, and R. E. Tarjan, The pairing heap: A new form of self-adjusting heap, Algorithmica, 1:111-129, 1986. [6] A. Kaldewaij and B. Schoenmakers, The derivation of a tighter bound for top-down skew heaps, Information Processing Letters, 37:265-271, 1991. [7] D. D. Sleator and R. E. Tarjan, Self-adjusting heaps, SIAM J Comput., 15:52-69, 1986.

© 2005 by Chapman & Hall/CRC

7 Binomial, Fibonacci, and Pairing Heaps 7.1 7.2 7.3 7.4 7.5

7.1

7-1 7-2 7-6 7-12 7-14

Link and Insertion Algorithms • Binomial Heap-Speciﬁc Algorithms • Fibonacci Heap-Speciﬁc Algorithms • Pairing Heap-Speciﬁc Algorithms

Michael L. Fredman Rutgers University at New Brunswick

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Binomial Heaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fibonacci Heaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pairing Heaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pseudocode Summaries of the Algorithms . . . . . .

7.6

Related Developments . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7-17

Introduction

This chapter presents three algorithmically related data structures for implementing meldable priority queues: binomial heaps, Fibonacci heaps, and pairing heaps. What these three structures have in common is that (a) they are comprised of heap-ordered trees, (b) the comparisons performed to execute extractmin operations exclusively involve keys stored in the roots of trees, and (c) a common side eﬀect of a comparison between two root keys is the linking of the respective roots: one tree becomes a new subtree joined to the other root. A tree is considered heap-ordered provided that each node contains one item, and the key of the item stored in the parent p(x) of a node x never exceeds the key of the item stored in x. Thus, when two roots get linked, the root storing the larger key becomes a child of the other root. By convention, a linking operation positions the new child of a node as its leftmost child. Figure 7.1 illustrates these notions. Of the three data structures, the binomial heap structure was the ﬁrst to be invented (Vuillemin [13]), designed to eﬃciently support the operations insert, extractmin, delete, and meld. The binomial heap has been highly appreciated as an elegant and conceptually simple data structure, particularly given its ability to support the meld operation. The Fibonacci heap data structure (Fredman and Tarjan [6]) was inspired by and can be viewed as a generalization of the binomial heap structure. The raison d’ˆetre of the Fibonacci heap structure is its ability to eﬃciently execute decrease-key operations. A decrease-key operation replaces the key of an item, speciﬁed by location, by a smaller value: e.g. decreasekey(P,knew ,H). (The arguments specify that the item is located in node P of the priority queue H, and that its new key value is knew .) Decrease-key operations are prevalent in many network optimization algorithms, including minimum spanning tree, and shortest path. The pairing heap data structure (Fredman, Sedgewick, Sleator, and Tarjan [5]) was

© 2005 by Chapman & Hall/CRC

7-2

Handbook of Data Structures and Applications

3

4

7

9

5

8

6 (a) before linking.

3

8

4

7

9

5

6 (b) after linking.

FIGURE 7.1: Two heap-ordered trees and the result of their linking.

devised as a self-adjusting analogue of the Fibonacci heap, and has proved to be more eﬃcient in practice [11]. Binomial heaps and Fibonacci heaps are primarily of theoretical and historical interest. The pairing heap is the more eﬃcient and versatile data structure from a practical standpoint. The following three sections describe the respective data structures. Summaries of the various algorithms in the form of pseudocode are provided in section 7.5.

7.2

Binomial Heaps

We begin with an informal overview. A single binomial heap structure consists of a forest of specially structured trees, referred to as binomial trees. The number of nodes in a binomial tree is always a power of two. Deﬁned recursively, the binomial tree B0 consists of a single node. The binomial tree Bk , for k > 0, is obtained by linking two trees Bk−1 together; one tree becomes the leftmost subtree of the other. In general Bk has 2k nodes. Figures 7.2(a-b) illustrate the recursion and show several trees in the series. An alternative and useful way to view the structure of Bk is depicted in Figure 7.2(c): Bk consists of a root and subtrees (in order from left to right) Bk−1 , Bk−2 , · · · , B0 . The root of the binomial tree Bk has k children, and the tree is said to have rank k. We also observe that the height of Bk (maximum number of edges on any path directed away from the is k. The root) k descendants name “binomial heap” is inspired by the fact that the root of Bk has j at distance j.

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

(a) Recursion for binomial trees.

7-3

(b) Several binomial trees.

(c) An alternative recursion.

FIGURE 7.2: Binomial trees and their recursions. Because binomial trees have restricted sizes, a forest of trees is required to represent a priority queue of arbitrary size. A key observation, indeed a motivation for having tree sizes being powers of two, is that a priority queue of arbitrary size can be represented as a union of trees of distinct sizes. (In fact, the sizes of the constituent trees are uniquely determined and correspond to the powers of two that deﬁne the binary expansion of n, the size of the priority queue.) Moreover, because the tree sizes are unique, the number of trees in the forest of a priority queue of size n is at most lg(n + 1). Thus, ﬁnding the minimum key in the priority queue, which clearly lies in the root of one of its constituent trees (due to the heap-order condition), requires searching among at most lg(n + 1) tree roots. Figure 7.3 gives an example of binomial heap. Now let’s consider, from a high-level perspective, how the various heap operations are performed. As with leftist heaps (cf. Chapter 6), the various priority queue operations are to a large extent comprised of melding operations, and so we consider ﬁrst the melding of two heaps. The melding of two heaps proceeds as follows: (a) the trees of the respective forests are combined into a single forest, and then (b) consolidation takes place: pairs of trees having common rank are linked together until all remaining trees have distinct ranks. Figure 7.4 illustrates the process. An actual implementation mimics binary addition and proceeds in much the same was as merging two sorted lists in ascending order. We note that insertion is a special case of melding.

© 2005 by Chapman & Hall/CRC

7-4

Handbook of Data Structures and Applications

FIGURE 7.3: A binomial heap (showing placement of keys among forest nodes).

(a) Forests of two heaps Q1 and Q2 to be melded.

(b) Linkings among trees in the combined forest.

(c) Forest of meld(Q1 ,Q2 ).

FIGURE 7.4: Melding of two binomial heaps. The encircled objects reﬂect trees of common rank being linked. (Ranks are shown as numerals positioned within triangles which in turn represent individual trees.) Once linking takes place, the resulting tree becomes eligible for participation in further linkings, as indicated by the arrows that identify these linking results with participants of other linkings.

The extractmin operation is performed in two stages. First, the minimum root, the node containing the minimum key in the data structure, is found by examining the tree roots of the appropriate forest, and this node is removed. Next, the forest consisting of the subtrees of this removed root, whose ranks are distinct (see Figure 7.2(c)) and thus viewable as

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

7-5

constituting a binomial heap, is melded with the forest consisting of the trees that remain from the original forest. Figure 7.5 illustrates the process.

(a) Initial forest.

(b) Forests to be melded.

FIGURE 7.5: Extractmin Operation: The location of the minimum key is indicated in (a). The two encircled sets of trees shown in (b) represent forests to be melded. The smaller trees were initially subtrees of the root of the tree referenced in (a).

Finally, we consider arbitrary deletion. We assume that the node ν containing the item to be deleted is speciﬁed. Proceeding up the path to the root of the tree containing ν, we permute the items among the nodes on this path, placing in the root the item x originally in ν, and shifting each of the other items down one position (away from the root) along the path. This is accomplished through a sequence of exchange operations that move x towards the root. The process is referred to as a sift-up operation. Upon reaching the root r, r is then removed from the forest as though an extractmin operation is underway. Observe that the re-positioning of items in the ancestors of ν serves to maintain the heap-order property among the remaining nodes of the forest. Figure 7.6 illustrates the re-positioning of the item being deleted to the root. This completes our high-level descriptions of the heap operations. For navigational purposes, each node contains a leftmost child pointer and a sibling pointer that points to the next sibling to its right. The children of a node are thus stored in the linked list deﬁned by sibling pointers among these children, and the head of this list can be accessed by the leftmost child pointer of the parent. This provides the required access to the children of

© 2005 by Chapman & Hall/CRC

7-6

Handbook of Data Structures and Applications

1

5

1

3

3

4 initial location of item to be deleted

4

5

7

7 9 (a) initial item placement.

root to be deleted

9 (b) after movement to root.

FIGURE 7.6: Initial phase of deletion – sift-up operation.

a node for the purpose of implementing extractmin operations. Note that when a node obtains a new child as a consequence of a linking operation, the new child is positioned at the head of its list of siblings. To facilitate arbitrary deletions, we need a third pointer in each node pointing to its parent. To facilitate access to the ranks of trees, we maintain in each node the number of children it has, and refer to this quantity as the node rank. Node ranks are readily maintained under linking operations; the node rank of the root gaining a child gets incremented. Figure 7.7 depicts these structural features. As seen in Figure 7.2(c), the ranks of the children of a node form a descending sequence in the children’s linked list. However, since the melding operation is implemented by accessing the tree roots in ascending rank order, when deleting a root we ﬁrst reverse the list order of its children before proceeding with the melding. Each of the priority queue operations requires in the worst case O(log n) time, where n is the size of the heap that results from the operation. This follows, for melding, from the fact that its execution time is proportional to the combined lengths of the forest lists being merged. For extractmin, this follows from the time for melding, along with the fact that a root node has only O(log n) children. For arbitrary deletion, the time required for the sift-up operation is bounded by an amount proportional to the height of the tree containing the item. Including the time required for extractmin, it follows that the time required for arbitrary deletion is O(log n). Detailed code for manipulating binomial heaps can be found in Weiss [14].

7.3

Fibonacci Heaps

Fibonacci heaps were speciﬁcally designed to eﬃciently support decrease-key operations. For this purpose, the binomial heap can be regarded as a natural starting point. Why? Consider the class of priority queue data structures that are implemented as forests of heapordered trees, as will be the case for Fibonacci heaps. One way to immediately execute a

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

(a) ﬁelds of a node.

7-7

(b) a node and its three children.

FIGURE 7.7: Structure associated with a binomial heap node. Figure (b) illustrates the positioning of pointers among a node and its three children.

decrease-key operation, remaining within the framework of heap-ordered forests, is to simply change the key of the speciﬁed data item and sever its link to its parent, inserting the severed subtree as a new tree in the forest. Figure 7.8 illustrates the process. (Observe that the link to the parent only needs to be cut if the new key value is smaller than the key in the parent node, violating heap-order.) Fibonacci heaps accomplish this without degrading the asymptotic eﬃciency with which other priority queue operations can be supported. Observe that to accommodate node cuts, the list of children of a node needs to be doubly linked. Hence the nodes of a Fibonacci heap require two sibling pointers. Fibonacci heaps support ﬁndmin, insertion, meld, and decrease-key operations in constant amortized time, and deletion operations in O(log n) amortized time. For many applications, the distinction between worst-case times versus amortized times are of little signiﬁcance. A Fibonacci heap consists of a forest of heap-ordered trees. As we shall see, Fibonacci heaps diﬀer from binomial heaps in that there may be many trees in a forest of the same rank, and there is no constraint on the ordering of the trees in the forest list. The heap also includes a pointer to the tree root containing the minimum item, referred to as the min-pointer , that facilitates ﬁndmin operations. Figure 7.9 provides an example of a Fibonacci heap and illustrates certain structural aspects. The impact of severing subtrees is clearly incompatible with the pristine structure of the binomial tree that is the hallmark of the binomial heap. Nevertheless, the tree structures that can appear in the Fibonacci heap data structure must suﬃciently approximate binomial trees in order to satisfy the performance bounds we seek. The linking constraint imposed by binomial heaps, that trees being linked must have the same size, ensures that the number of children a node has (its rank), grows no faster than the logarithm of the size of the subtree rooted at the node. This rank versus subtree size relation is key to obtaining the O(log n) deletion time bound. Fibonacci heap manipulations are designed with this in mind. Fibonacci heaps utilize a protocol referred to as cascading cuts to enforce the required rank versus subtree size relation. Once a node ν has had two of its children removed as a result of cuts, ν’s contribution to the rank of its parent is then considered suspect in terms of rank versus subtree size. The cascading cut protocol requires that the link to ν’s parent

© 2005 by Chapman & Hall/CRC

7-8

Handbook of Data Structures and Applications

(a) Initial tree.

(b) Subtree to be severed.

(c) Resulting changes

FIGURE 7.8: Immediate decrease-key operation. The subtree severing (Figures (b) and (c)) is necessary only when k < j.

be cut, with the subtree rooted at ν then being inserted into the forest as a new tree. If ν’s parent has, as a result, had a second child removed, then it in turn needs to be cut, and the cuts may thus cascade. Cascading cuts ensure that no non-root node has had more than one child removed subsequent to being linked to its parent. We keep track of the removal of children by marking a node if one of its children has been cut. A marked node that has another child removed is then subject to being cut from its parent. When a marked node becomes linked as a child to another node, or when it gets cut from its parent, it gets unmarked. Figure 7.10 illustrates the protocol of cascading cuts. Now the induced node cuts under the cascading cuts protocol, in contrast with those primary cuts immediately triggered by decrease-key operations, are bounded in number by the number of primary cuts. (This follows from consideration of a potential function deﬁned to be the total number of marked nodes.) Therefore, the burden imposed by cascading cuts can be viewed as eﬀectively only doubling the number of cuts taking place in the absence of the protocol. One can therefore expect that the performance asymptotics are not degraded as a consequence of proliferating cuts. As with binomial heaps, two trees in a Fibonacci heap can only be linked if they have equal rank. With the cascading cuts protocol in place,

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

7-9

(a) a heap

(b) ﬁelds of a node.

(c) pointers among a node and its three children.

FIGURE 7.9: A Fibonacci heap and associated structure. we claim that the required rank versus subtree size relation holds, a matter which we address next. Let’s consider how small the subtree rooted at a node ν having rank k can be. Let ω be the mth child of ν from the right. At the time it was linked to ν, ν had at least m − 1 other children (those currently to the right of ω were certainly present). Therefore ω had rank at least m − 1 when it was linked to ν. Under the cascading cuts protocol, the rank of ω could have decreased by at most one after its linking to ν; otherwise it would have been removed as a child. Therefore, the current rank of ω is at least m − 2. We minimize the size of the subtree rooted at ν by minimizing the sizes (and ranks) of the subtrees rooted at

© 2005 by Chapman & Hall/CRC

7-10

Handbook of Data Structures and Applications

(a) Before decrease-key.

(b) After decrease-key.

FIGURE 7.10: Illustration of cascading cuts. In (b) the dashed lines reﬂect cuts that have taken place, two nodes marked in (a) get unmarked, and a third node gets marked.

ν’s children. Now let Fj denote the minimum possible size of the subtree rooted at a node of rank j, so that the size of the subtree rooted at ν is Fk . We conclude that (for k ≥ 2) Fk = Fk−2 + Fk−3 + · · · + F0 + 1 +1 k terms where the ﬁnal term, 1, reﬂects the contribution of ν to the subtree size. Clearly, F0 = 1 and F1 = 2. See Figure 7.11 for an illustration of this construction. Based on the preceding recurrence, it is readily shown that Fk is given by the (k + 2)th Fibonacci number (from whence the name “Fibonacci heap” was inspired). Moreover, since the Fibonacci numbers grow exponentially fast, we conclude that the rank of a node is indeed bounded by the logarithm of the size of the subtree rooted at the node. We proceed next to describe how the various operations are performed. Since we are not seeking worst-case bounds, there are economies to be exploited that could also be applied to obtain a variant of Binomial heaps. (In the absence of cuts, the individual trees generated by Fibonacci heap manipulations would all be binomial trees.) In particular we shall adopt a lazy approach to melding operations: the respective forests are simply combined by concatenating their tree lists and retaining the appropriate min-pointer. This requires only constant time. An item is deleted from a Fibonacci heap by deleting the node that originally contains it, in contrast with Binomial heaps. This is accomplished by (a) cutting the link to the node’s parent (as in decrease-key) if the node is not a tree root, and (b) appending the list of children of the node to the forest. Now if the deleted node happens to be referenced by the min-pointer, considerable work is required to restore the min-pointer – the work previously deferred by the lazy approach to the operations. In the course of searching among the roots

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

7-11

FIGURE 7.11: Minimal tree of rank k. Node ranks are shown adjacent to each node.

of the forest to discover the new minimum key, we also link trees together in a consolidation process. Consolidation processes the trees in the forest, linking them in pairs until there are no longer two trees having the same rank, and then places the remaining trees in a new forest list (naturally extending the melding process employed by binomial heaps). This can be accomplished in time proportional to the number of trees in forest plus the maximum possible node rank. Let max-rank denote the maximum possible node rank. (The preceding discussion implies that max-rank = O(log heap-size).) Consolidation is initialized by setting up an array A of trees (initially empty) indexed by the range [0,max-rank]. A non-empty position A[d] of A contains a tree of rank d. The trees of the forest are then processed using the array A as follows. To process a tree T of rank d, we insert T into A[d] if this position of A is empty, completing the processing of T. However, if A[d] already contains a tree U, then T and U are linked together to form a tree W, and the processing continues as before, but with W in place of T, until eventually an empty location of A is accessed, completing the processing associated with T. After all of the trees have been processed in this manner, the array A is scanned, placing each of its stored trees in a new forest. Apart from the ﬁnal scanning step, the total time necessary to consolidate a forest is proportional to its number of trees, since the total number of tree pairings that can take place is bounded by this number (each pairing reduces by one the total number of trees present). The time required for the ﬁnal scanning step is given by max-rank = log(heap-size). The amortized timing analysis of Fibonacci heaps considers a potential function deﬁned as the total number of trees in the forests of the various heaps being maintained. Ignoring consolidation, each operation takes constant actual time, apart from an amount of time proportional to the number of subtree cuts due to cascading (which, as noted above, is only constant in amortized terms). These cuts also contribute to the potential. The children of a deleted node increase the potential by O(log heap-size). Deletion of a minimum heap node additionally incurs the cost of consolidation. However, consolidation reduces our potential, so that the amortized time it requires is only O(log heap-size). We conclude therefore that all non-deletion operations require constant amortized time, and deletion requires O(log n) amortized time. An interesting and unresolved issue concerns the protocol of cascading cuts. How would the performance of Fibonacci heaps be aﬀected by the absence of this protocol? Detailed code for manipulating Fibonacci heaps can found in Knuth [9].

© 2005 by Chapman & Hall/CRC

7-12

7.4

Handbook of Data Structures and Applications

Pairing Heaps

The pairing heap was designed to be a self-adjusting analogue of the Fibonacci heap, in much the same way that the skew heap is a self-adjusting analogue of the leftist heap (See Chapters 5 and 6). The only structure maintained in a pairing heap node, besides item information, consists of three pointers: leftmost child, and two sibling pointers. (The leftmost child of a node uses it left sibling pointer to point to its parent, to facilitate updating the leftmost child pointer its parent.) See Figure 7.12 for an illustration of pointer structure.

FIGURE 7.12: Pointers among a pairing heap node and its three children.

The are no cascading cuts – only simple cuts for decrease-key and deletion operations. With the absence of parent pointers, decrease-key operations uniformly require a single cut (removal from the sibling list, in actuality), as there is no eﬃcient way to check whether heap-order would otherwise be violated. Although there are several varieties of pairing heaps, our discussion presents the two-pass version (the simplest), for which a given heap consists of only a single tree. The minimum element is thus uniquely located, and melding requires only a single linking operation. Similarly, a decrease-key operation consists of a subtree cut followed by a linking operation. Extractmin is implemented by removing the tree root and then linking the root’s subtrees in a manner described below. Other deletions involve (a) a subtree cut, (b) an extractmin operation on the cut subtree, and (c) linking the remnant of the cut subtree with the original root. The extractmin operation combines the subtrees of the root using a process referred to as two-pass pairing. Let x1 , · · · , xk be the subtrees of the root in left-to-right order. The ﬁrst pass begins by linking x1 and x2 . Then x3 and x4 are linked, followed by x5 and x6 , etc., so that the odd positioned trees are linked with neighboring even positioned trees. Let y1 , · · · , yh , h = k/2 , be the resulting trees, respecting left-to-right order. (If k is odd, then yk/2 is xk .) The second pass reduces these to a single tree with linkings that proceed from right-to-left. The rightmost pair of trees, yh and yh−1 are linked ﬁrst, followed by the linking of yh−2 with the result of the preceding linking etc., until ﬁnally we link y1 with the structure formed from the linkings of y2 , · · · , yh . See Figure 7.13. Since two-pass pairing is not particularly intuitive, a few motivating remarks are oﬀered. The ﬁrst pass is natural enough, and one might consider simply repeating the process on the remaining trees, until, after logarithmically many such passes, only one tree remains. Indeed, this is known as the multi-pass variation. Unfortunately, its behavior is less understood than that of the two-pass pairing variation. The second (right-to-left) pass is also quite natural. Let H be a binomial heap with exactly 2k items, so that it consists of a single tree. Now suppose that an extractmin followed by

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

7-13

...

(a) ﬁrst pass.

S

...

D

C

B

A

(b) second pass.

FIGURE 7.13: Two-pass Pairing. The encircled trees get linked. For example, in (b) trees A and B get linked, and the result then gets linked with the tree C, etc.

an insertion operation are executed. The linkings that take place among the subtrees of the deleted root (after the new node is linked with the rightmost of these subtrees) entail the right-to-left processing that characterizes the second pass. So why not simply rely upon a single right-to-left pass, and omit the ﬁrst? The reason, is that although the second pass preserves existing balance within the structure, it doesn’t improve upon poorly balanced situations (manifested when most linkings take place between trees of disparate sizes). For example, using a single-right-to-left-pass version of a pairing heap to sort an increasing sequence of length n (n insertions followed by n extractmin operations), would result in an n2 sorting algorithm. (Each of the extractmin operations yields a tree of height 1 or less.) See Section 7.6, however, for an interesting twist. In actuality two-pass pairing was inspired [5] by consideration of splay trees (Chapter 12). If we consider the child, sibling representation that maps a forest of arbitrary trees into a binary tree, then two-pass pairing can be viewed as a splay operation on a search tree path with no bends [5]. The analysis for splay trees then carries over to provide an amortized analysis for pairing heaps. The asymptotic behavior of pairing heaps is an interesting and unresolved matter. Reﬂecting upon the tree structures we have encountered in this chapter, if we view the binomial trees that comprise binomial heaps, their structure highly constrained, as likened to perfectly spherical masses of discrete diameter, then the trees that comprise Fibonacci heaps can be viewed as rather rounded masses, but rarely spherical, and of arbitrary (non-discrete) size. Applying this imagery to the trees that arise from pairing heap manipulations, we can aptly liken these trees to chunks of clay subject to repeated tearing and compaction, typically irregular in form. It is not obvious, therefore, that pairing heaps should be asymptotically eﬃcient. On the other hand, since the pairing heap design dispenses with the rather complicated, carefully crafted constructs put in place primarily to facilitate proving the time bounds enjoyed by Fibonacci heaps, we can expect eﬃciency gains at the level of elemen-

© 2005 by Chapman & Hall/CRC

7-14

Handbook of Data Structures and Applications

tary steps such as linking operations. From a practical standpoint the data structure is a success, as seen from the study of Moret and Shapiro [11]. Also, for those applications for which decrease-key operations are highly predominant, pairing heaps provably meet the optimal asymptotic bounds characteristic of Fibonacci heaps [3]. But despite this, as well as empirical evidence consistent with optimal eﬃciency in general, pairing heaps are in fact asymptotically sub-optimal for certain operation sequences [3]. Although decrease-key requires only constant worst-case time, its execution can asymptotically degrade the eﬃciency of extractmin operations, even though the eﬀect is not observable in practice. On the positive side, it has been demonstrated [5] that under all circumstances the operations require only O(log n) amortized time. Additionally, Iacono [7] has shown that insertions require only constant amortized time; signiﬁcant for those applications that entail many more insertions than deletions. The reader may wonder whether some alternative to two-pass pairing might provably attain the asymptotic performance bounds satisﬁed by Fibonacci heaps. However, for information-theoretic reasons no such alternative exists. (In fact, this is how we know the two-pass version is sub-optimal.) A precise statement and proof of this result appears in Fredman [3]. Detailed code for manipulating pairing heaps can be found in Weiss [14].

7.5

Pseudocode Summaries of the Algorithms

This section provides pseudocode reﬂecting the above algorithm descriptions. The procedures, link and insert, are suﬃciently common with respect to all three data structures, that we present them ﬁrst, and then turn to those procedures having implementations speciﬁc to a particular data structure.

7.5.1

Link and Insertion Algorithms

Function link(x,y){ // x and y are tree roots. The operation makes the root with the // larger key the leftmost child of the other root. For binomial and // Fibonacci heaps, the rank field of the prevailing root is // incremented. Also, for Fibonacci heaps, the node becoming the child // gets unmarked if it happens to be originally marked. The function // returns a pointer to the node x or y that becomes the root. } Algorithm Insert(x,H){ //Inserts into heap H the item x I = Makeheap(x) // Creates a single item heap I containing the item x. H = Meld(H,I). }

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

7.5.2

7-15

Binomial Heap-Speciﬁc Algorithms

Function Meld(H,I){ // The forest lists of H and I are combined and consolidated -- trees // having common rank are linked together until only trees of distinct // ranks remain. (As described above, the process resembles binary // addition.) A pointer to the resulting list is returned. The // original lists are no longer available. } Function Extractmin(H){ //Returns the item containing the minimum key in the heap H. //The root node r containing this item is removed from H. r = find-minimum-root(H) if(r = null){return "Empty"} else{ x = item in r H = remove(H,r) // removes the tree rooted at r from the forest of H I = reverse(list of children of r) H = Meld(H,I) return x } } Algorithm Delete(x,H) //Removes from heap H the item in the node referenced by x. r = sift-up(x) // r is the root of the tree containing x. As described above, // sift-up moves the item information in x to r. H = remove(H,r) // removes the tree rooted at r from the forest of H I = reverse(list of children of r) H = Meld(H,I) }

7.5.3

Fibonacci Heap-Speciﬁc Algorithms

Function Findmin(H){ //Return the item in the node referenced by the min-pointer of H //(or "Empty" if applicable) } Function Meld(H,I){ // The forest lists of H and I are concatenated. The keys referenced // by the respective min-pointers of H and I are compared, and the // min-pointer referencing the larger key is discarded. The concatenation // result and the retained min-pointer are returned. The original // forest lists of H and I are no longer available. }

© 2005 by Chapman & Hall/CRC

7-16

Handbook of Data Structures and Applications

Algorithm Cascade-Cut(x,H){ //Used in decrease-key and deletion. Assumes parent(x) != null y = parent(x) cut(x,H) // The subtree rooted at x is removed from parent(x) and inserted into // the forest list of H. The mark-field of x is set to FALSE, and the // rank of parent(x) is decremented. x = y while(x is marked and parent(x) != null){ y = parent(x) cut(x,H) x = y } Set mark-field of x = TRUE } Algorithm Decrease-key(x,k,H){ key(x) = k if(key of min-pointer(H) > k){ min-pointer(H) = x} if(parent(x) != null and key(parent(x)) > k){ Cascade-Cut(x,H)} } Algorithm Delete(x,H){ If(parent(x) != null){ Cascade-Cut(x,H) forest-list(H) = concatenate(forest-list(H), leftmost-child(x)) H = remove(H,x) // removes the (single node) tree rooted at x from the forest of H } else{ forest-list(H) = concatenate(forest-list(H), leftmost-child(x)) H = remove(H,x) if(min-pointer(H) = x){ consolidate(H) // trees of common rank in the forest list of H are linked // together until only trees having distinct ranks remain. The // remaining trees then constitute the forest list of H. // min-pointer is reset to reference the root with minimum key. } } }

7.5.4

Pairing Heap-Speciﬁc Algorithms

Function Findmin(H){ // Returns the item in the node referenced by H (or "empty" if applicable) } Function Meld(H,I){ return link(H,I) }

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

7-17

Function Decrease-key(x,k,H){ If(x != H){ Cut(x) // The node x is removed from the child list in which it appears key(x) = k H = link(H,x) } else{ key(H) = k} } Function Two-Pass-Pairing(x){ // x is assumed to be a pointer to the first node of a list of tree // roots. The function executes two-pass pairing to combine the trees // into a single tree as described above, and returns a pointer to // the root of the resulting tree. } Algorithm Delete(x,H){ y = Two-Pass-Pairing(leftmost-child(x)) if(x = H){ H = y} else{ Cut(x) // The subtree rooted at x is removed from its list of siblings. H = link(H,y) } }

7.6

Related Developments

In this section we describe some results pertinent to the data structures of this chapter. First, we discuss a variation of the pairing heap, referred to as the skew-pairing heap. The skew-pairing heap appears as a form of “missing link” in the landscape occupied by pairing heaps and skew heaps (Chapter 6). Second, we discuss some adaptive properties of pairing heaps. Finally, we take note of soft heaps, a new shoot of activity emanating from the primordial binomial heap structure that has given rise to the topics of this chapter. Skew-Pairing Heaps

There is a curious variation of the pairing heap which we refer to as a skew-pairing heap – the name will become clear. Aside from the linking process used for combining subtrees in the extractmin operation, skew-pairing heaps are identical to two-pass pairing heaps. The skew-pairing heap extractmin linking process places greater emphasis on right-to-left linking than does the pairing heap, and proceeds as follows. First, a right-to-left linking of the subtrees that fall in odd numbered positions is executed. Let Hodd denote the result. Similarly, the subtrees in even numbered positions are linked in right-to-left order. Let Heven denote the result. Finally, we link the two trees, Hodd and Heven . Figure 7.14 illustrates the process. The skew-pairing heap enjoys O(log n) time bounds for the usual operations. Moreover, it has the following curious relationship to the skew heap. Suppose a ﬁnite sequence S of

© 2005 by Chapman & Hall/CRC

7-18

Handbook of Data Structures and Applications

(a) subtrees before linking.

(b) linkings.

FIGURE 7.14: Skew-pairing heap: linking of subtrees performed by extractmin. As described in Figure 7.13, encircled trees become linked.

meld and extractmin operations is executed (beginning with heaps of size 1) using (a) a skew heap and (b) a skew-pairing heap. Let Cs and Cs−p be the respective sets of comparisons between keys that actually get performed in the course of the respective executions (ignoring the order of the comparison executions). Then Cs−p ⊂ Cs [4]. Moreover, if the sequence S terminates with the heap empty, then Cs−p = Cs . (This inspires the name “skew-pairing”.) The relationship between skew-pairing heaps and splay trees is also interesting. The child, sibling transformation, which for two-pass pairing heaps transforms the extractmin operation into a splay operation on a search tree path having no bends, when applied to the skew-pairing heap, transforms extractmin into a splay operation on a search tree path having a bend at each node. Thus, skew-pairing heaps and two-pass pairing heaps demarcate opposite ends of a spectrum. Adaptive Properties of Pairing Heaps

Consider the problem of merging k sorted lists of respective lengths n1 , n2 , · · · , nk , with ni = n. The standard merging strategy that performs lg k rounds of pairwise list merges requires n lg k time. However, a merge pattern based upon the binary Huﬀman tree, having minimal external path length for the weights n1 , n2 , · · · , nk , is more eﬃcient when the lengths ni are non-uniform, and provides a near optimal solution. Pairing heaps can be utilized to provide a rather diﬀerent solution as follows. Treat each sorted list as a

© 2005 by Chapman & Hall/CRC

Binomial, Fibonacci, and Pairing Heaps

7-19

linearly structured pairing heap. Then (a) meld these k heaps together, and (b) repeatedly execute extractmin operations to retrieve the n items in their sorted order. The number of comparisons that take place is bounded by n O(log ) n 1 , · · · , nk Since the above multinomial coeﬃcient represents the number of possible merge patterns, the information-theoretic bound implies that this result is optimal to within a constant factor. The pairing heap thus self-organizes the sorted list arrangement to approximate an optimal merge pattern. Iacono has derived a “working-set” theorem that quantiﬁes a similar adaptive property satisﬁed by pairing heaps. Given a sequence of insertion and extractmin operations initiated with an empty heap, at the time a given item x is deleted we can attribute to x a contribution bounded by O(log op(x)) to the total running time of the sequence, where op(x) is the number of heap operations that have taken place since x was inserted (see [8] for a slightly tighter estimate). Iacono has also shown that this same bound applies for skew and skew-pairing heaps [8]. Knuth [10] has observed, at least in qualitative terms, similar behavior for leftist heaps . Quoting Knuth: Leftist trees are in fact already obsolete, except for applications with a strong tendency towards last-in-ﬁrst-out behavior. Soft Heaps

An interesting development (Chazelle [1]) that builds upon and extends binomial heaps in a diﬀerent direction is a data structure referred to as a soft heap. The soft heap departs from the standard notion of priority queue by allowing for a type of error, referred to as corruption, which confers enhanced eﬃciency. When an item becomes corrupted, its key value gets increased. Findmin returns the minimum current key, which might or might not be corrupted. The user has no control over which items become corrupted, this prerogative belonging to the data structure. But the user does control the overall amount of corruption in the following sense. The user speciﬁes a parameter, 0 < ≤ 1/2, referred to as the error rate, that governs the behavior of the data structure as follows. The operations ﬁndmin and deletion are supported in constant amortized time, and insertion is supported in O(log 1/) amortized time. Moreover, no more than an fraction of the items present in the heap are corrupted at any given time. To illustrate the concept, let x be an item returned by ﬁndmin, from a soft heap of size n. Then there are no more than n items in the heap whose original keys are less than the original key of x. Soft heaps are rather subtle, and we won’t attempt to discuss speciﬁcs of their design. Soft heaps have been used to construct an optimal comparison-based minimum spanning tree algorithm (Pettie and Ramachandran [12]), although its actual running time has not been determined. Soft heaps have also been used to construct a comparison-based algorithm with known running time mα(m, n) on a graph with n vertices and m edges (Chazelle [2]), where α(m, n) is a functional inverse of the Ackermann function. Chazelle [1] has also observed that soft heaps can be used to implement median selection in linear time; a signiﬁcant departure from previous methods.

© 2005 by Chapman & Hall/CRC

7-20

Handbook of Data Structures and Applications

References [1] B. Chazelle, The Soft Heap: An Approximate Priority Queue with Optimal Error Rate, Journal of the ACM , 47 (2000), 1012–1027. [2] B. Chazelle, A Faster Deterministic Algorithm for Minimum Spanning Trees, Journal of the ACM, 47 (2000), 1028–1047. [3] M. L. Fredman, On the Eﬃciency of Pairing Heaps and Related Data Structures, Journal of the ACM , 46 (1999), 473–501. [4] M. L. Fredman, A Priority Queue Transform, WAE: International Workshop on Algorithm Engineering LNCS 1668 (1999), 243–257. [5] M. L. Fredman, R. Sedgewick, D. D. Sleator, and R. E. Tarjan, The Pairing Heap: A New Form of Self-adjusting Heap, Algorithmica , 1 (1986), 111–129. [6] M. L. Fredman and R. E. Tarjan, Fibonacci Heaps and Their Uses in Improved Optimization Algorithms, Journal of the ACM , 34 (1987), 596–615. [7] J. Iacono, New upper bounds for pairing heaps, Scandinavian Workshop on Algorithm Theory , LNCS 1851 (2000), 35–42. [8] J. Iacono, Distribution sensitive data structures, Ph.D. Thesis, Rutgers University , 2001. [9] D. E. Knuth, The Stanford Graph Base , ACM Press, New York, N.Y., 1994. [10] D. E. Knuth, Sorting and Searching 2d ed., Addison-Wesley, Reading MA., 1998. [11] B. M. E. Moret and H. D. Shapiro, An Empirical Analysis of Algorithms for Constructing a Minimum Spanning Tree, Proceedings of the Second Workshop on Algorithms and Data Structures (1991), 400–411. [12] S. Pettie and V. Ramachandran, An Optimal Minimum Spanning Tree Algorithm, Journal of the ACM 49 (2002), 16–34. [13] J. Vuillemin, A Data Structure for Manipulating Priority Queues, Communications of the ACM , 21 (1978), 309–314. [14] M. A. Weiss, Data Structures and Algorithms in C , 2d ed., Addison-Wesley, Reading MA., 1997.

© 2005 by Chapman & Hall/CRC

8 Double-Ended Priority Queues 8.1 8.2 8.3

Deﬁnition and an Application . . . . . . . . . . . . . . . . . . . . Symmetric Min-Max Heaps . . . . . . . . . . . . . . . . . . . . . . . Interval Heaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8-1 8-2 8-5

Inserting an Element • Removing the Min Element • Initializing an Interval Heap • Complexity of Interval Heap Operations • The Complementary Range Search Problem

8.4

Min-Max Heaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting an Element

8.5

University of Florida

8.1

8.7

•

8-16

Removing the Min Element

Generic Methods for DEPQs . . . . . . . . . . . . . . . . . . . . . Dual Priority Queues Correspondence

Sartaj Sahni

•

8-11

Removing the Min Element

Deaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting an Element

8.6

•

Total Correspondence

•

8-19

Leaf

Meldable DEPQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8-21

Deﬁnition and an Application

A double-ended priority queue (DEPQ) is a collection of zero or more elements. Each element has a priority or value. The operations performed on a double-ended priority queue are: 1. 2. 3. 4.

getM in() ... return element with minimum priority getM ax() ... return element with maximum priority put(x) ... insert the element x into the DEPQ removeM in() ... remove an element with minimum priority and return this element 5. removeM ax() ... remove an element with maximum priority and return this element One application of a DEPQ is to the adaptation of quick sort, which has the the best expected run time of all known internal sorting methods, to external sorting. The basic idea in quick sort is to partition the elements to be sorted into three groups L, M , and R. The middle group M contains a single element called the pivot, all elements in the left group L are ≤ the pivot, and all elements in the right group R are ≥ the pivot. Following this partitioning, the left and right element groups are sorted recursively. In an external sort, we have more elements than can be held in the memory of our computer. The elements to be sorted are initially on a disk and the sorted sequence is to be left on the disk. When the internal quick sort method outlined above is extended to an

8-1

© 2005 by Chapman & Hall/CRC

8-2

Handbook of Data Structures and Applications

external quick sort, the middle group M is made as large as possible through the use of a DEPQ. The external quick sort strategy is: 1. Read in as many elements as will ﬁt into an internal DEPQ. The elements in the DEPQ will eventually be the middle group of elements. 2. Read in the remaining elements. If the next element is ≤ the smallest element in the DEPQ, output this next element as part of the left group. If the next element is ≥ the largest element in the DEPQ, output this next element as part of the right group. Otherwise, remove either the max or min element from the DEPQ (the choice may be made randomly or alternately); if the max element is removed, output it as part of the right group; otherwise, output the removed element as part of the left group; insert the newly input element into the DEPQ. 3. Output the elements in the DEPQ, in sorted order, as the middle group. 4. Sort the left and right groups recursively. In this chapter, we describe four implicit data structures—symmetric min-max heaps, interval heaps, min-max heaps, and deaps—for DEPQs. Also, we describe generic methods to obtain eﬃcient DEPQ data structures from eﬃcient data structures for single-ended priority queues (PQ).1

8.2

Symmetric Min-Max Heaps

Several simple and eﬃcient implicit data structures have been proposed for the representation of a DEPQ [1, 2, 4, 5, 16, 17, 21]. All of these data structures are adaptations of the classical heap data structure (Chapter 2) for a PQ. Further, in all of these DEPQ data structures, getM ax and getM in take O(1) time and the remaining operations take O(log n) time each (n is the number of elements in the DEPQ). The symmetric min-max heap structure of Arvind and Pandu Rangan [1] is the simplest of the implicit data structures for DEPQs. Therefore, we describe this data structure ﬁrst. A symmetric min-max heap (SMMH) is a complete binary tree in which each node other than the root has exactly one element. The root of an SMMH is empty and the total number of nodes in the SMMH is n + 1, where n is the number of elements. Let x be any node of the SMMH. Let elements(x) be the elements in the subtree rooted at x but excluding the element (if any) in x. Assume that elements(x) = ∅. x satisﬁes the following properties: 1. The left child of x has the minimum element in elements(x). 2. The right child of x (if any) has the maximum element in elements(x). Figure 8.1 shows an example SMMH that has 12 elements. When x denotes the node with 80, elements(x) = {6, 14, 30, 40}; the left child of x has the minimum element 6 in elements(x); and the right child of x has the maximum element 40 in elements(x). You may verify that every node x of this SMMH satisﬁes the stated properties. Since an SMMH is a complete binary tree, it is stored as an implicit data structure using the standard mapping of a complete binary tree into an array. When n = 1, the minimum and maximum elements are the same and are in the left child of the root of the SMMH.

1 A minPQ supports the operations getmin(), put(x), and removeM in() while a maxP Q supports the operations getM ax(), put(x), and removeM ax().

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-3

4

80

8 12

60 20

10

6 16

14

40 30

FIGURE 8.1: A symmetric min-max heap.

4

80

8 12

60 20

10

6 16

14

40 30

A

FIGURE 8.2: The SMMH of Figure 8.1 with a node added.

When n > 1, the minimum element is in the left child of the root and the maximum is in the right child of the root. So the getM in and getM ax operations take O(1) time. It is easy to see that an n + 1-node complete binary tree with an empty root and one element in every other node is an SMMH iﬀ the following are true: P1: For every node x that has a right sibling, the element in x is less than or equal to that in the right sibling of x. P2: For every node x that has a grandparent, the element in the left child of the grandparent is less than or equal to that in x. P3: For every node x that has a grandparent, the element in the right child of the grandparent is greater than or equal to that in x. Notice that if property P1 is satisﬁed at node x, then at most one of P 2 and P 3 may be violated at x. Using properties P1 through P3 we arrive at simple algorithms to insert and remove elements. These algorithms are simple adaptations of the corresponding algorithms for min and max heaps. Their complexity is O(log n). We describe only the insert operation. Suppose we wish to insert 2 into the SMMH of Figure 8.1. Since an SMMH is a complete binary tree, we must add a new node to the SMMH in the position shown in Figure 8.2; the new node is labeled A. In our example, A will denote an empty node. If the new element 2 is placed in node A, property P2 is violated as the left child of the grandparent of A has 6. So we move the 6 down to A and obtain Figure 8.3. Now we see if it is safe to insert the 2 into node A. We ﬁrst notice that property P1 cannot be violated, because the previous occupant of node A was greater than 2. Similarly, property P3 cannot be violated. Only P2 can be violated only when x = A. So we check P2 with x = A. We see that P2 is violated because the left child of the grandparent of A

© 2005 by Chapman & Hall/CRC

8-4

Handbook of Data Structures and Applications

4

80

8 12

60 20

10

A 16

14

40 30

6

FIGURE 8.3: The SMMH of Figure 8.2 with 6 moved down.

A

80

8 12

60 20

10

4 16

14

40 30

6

FIGURE 8.4: The SMMH of Figure 8.3 with 4 moved down.

2

80

8 12

60 20

10

4 16

14

40 30

6

FIGURE 8.5: The SMMH of Figure 8.4 with 2 inserted.

has the element 4. So we move the 4 down to A and obtain the conﬁguration shown in Figure 8.4. For the conﬁguration of Figure 8.4 we see that placing 2 into node A cannot violate property P1, because the previous occupant of node A was greater than 2. Also properties P2 and P3 cannot be violated, because node A has no grandparent. So we insert 2 into node A and obtain Figure 8.5. Let us now insert 50 into the SMMH of Figure 8.5. Since an SMMH is a complete binary tree, the new node must be positioned as in Figure 8.6. Since A has a right child of its parent, we ﬁrst check P1 at node A. If the new element (in this case 50) is smaller than that in the left sibling of A, we swap the new element and the element in the left sibling. In our case, no swap is done. Then we check P2 and P3.

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-5

2

80

8 12

60 20

10

4 16

14

40 30

6

A

FIGURE 8.6: The SMMH of Figure 8.5 with a node added.

2

80

8 12

60 20

10

4 16

14

A 30

6

40

FIGURE 8.7: The SMMH of Figure 8.6 with 40 moved down.

We see that placing 50 into A would violate P3. So the element 40 in the right child of the grandparent of A is moved down to node A. Figure 8.7 shows the resulting conﬁguration. Placing 50 into node A of Figure 8.7 cannot create a P1 violation because the previous occupant of node A was smaller. Also, a P2 violation isn’t possible either. So only P3 needs to be checked at A. Since there is no P3 violation at A, 50 is placed into A. The algorithm to remove either the min or max element is a similar adaptation of the trickle-down algorithm used to remove an element from a min or max heap.

8.3

Interval Heaps

The twin heaps of [21], the min-max pair heaps of [17], the interval heaps of [11, 16], and the diamond deques of [5] are virtually identical data structures. In each of these structures, an n element DEPQ is represented by a min heap with n/2 elements and a max heap with the remaining n/2 elements. The two heaps satisfy the property that each element in the min heap is ≤ the corresponding element (two elements correspond if they occupy the same position in their respective binary trees) in the max heap. When the number of elements in the DEPQ is odd, the min heap has one element (i.e., element n/2) that has no corresponding element in the max heap. In the twin heaps of [21], this is handled as a special case and one element is kept outside of the two heaps. In min-max pair heaps, interval heaps, and diamond deques, the case when n is odd is handled by requiring element n/2 of the min heap to be ≤ element n/4 of the max heap. In the twin heaps of [21], the min and max heaps are stored in two arrays min and max

© 2005 by Chapman & Hall/CRC

8-6

Handbook of Data Structures and Applications 2,30 3,17

4,15

4,12 4,10

3,11 5,11

5,9

5,10 4,7

8,8

6,15 7,9

FIGURE 8.8: An interval heap. using the standard array representation of a complete binary tree2 [15]. The correspondence property becomes min[i] ≤ max[i], 1 ≤ i ≤ n/2 . In the min-max pair heaps of [17] and the interval heaps of [16], the two heaps are stored in a single array minmax and we have minmax[i].min being the i’th element of the min heap, 1 ≤ i ≤ n/2 and minmax[i].max being the i’th element of the max heap, 1 ≤ i ≤ n/2 . In the diamond deque [5], the two heaps are mapped into a single array with the min heap occupying even positions (beginning with position 0) and the max heap occupying odd positions (beginning with position 1). Since this mapping is slightly more complex than the ones used in twin heaps, min-max pair heaps, and interval heaps, actual implementations of the diamond deque are expected to be slightly slower than implementations of the remaining three structures. Since the twin heaps of [21], the min-max pair heaps of [17], the interval heaps of [16], and the diamond deques of [5] are virtually identical data structures, we describe only one of these—interval heaps—in detail. An interval heap is a complete binary tree in which each node, except possibly the last one (the nodes of the complete binary tree are ordered using a level order traversal), contains two elements. Let the two elements in node P be a and b, where a ≤ b. We say that the node P represents the closed interval [a, b]. a is the left end point of the interval of P , and b is its right end point. The interval [c, d] is contained in the interval [a, b] iﬀ a ≤ c ≤ d ≤ b. In an interval heap, the intervals represented by the left and right children (if they exist) of each node P are contained in the interval represented by P . When the last node contains a single element c, then a ≤ c ≤ b, where [a, b] is the interval of the parent (if any) of the last node. Figure 8.8 shows an interval heap with 26 elements. You may verify that the intervals represented by the children of any node P are contained in the interval of P . The following facts are immediate: 1. The left end points of the node intervals deﬁne a min heap, and the right end points deﬁne a max heap. In case the number of elements is odd, the last node has a single element which may be regarded as a member of either the min or max heap. Figure 8.9 shows the min and max heaps deﬁned by the interval heap of Figure 8.8. 2. When the root has two elements, the left end point of the root is the minimum element in the interval heap and the right end point is the maximum. When

2 In a full binary tree, every non-empty level has the maximum number of nodes possible for that level. Number the nodes in a full binary tree 1, 2, · · · beginning with the root level and within a level from left to right. The nodes numbered 1 through n deﬁne the unique complete binary tree that has n nodes.

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-7

2

30

3

4

4 4

3 5

5

5 4

8

17 6

15

12 10

7

11 11

9

(a) min heap

10 7

8

15 9

(b) max heap

FIGURE 8.9: Min and max heaps embedded in Figure 8.8.

2,30 3,17

4,15

4,12 4,10

3,11 5,11

5,9

5,10 4,7

8,8

6,15 7,9

A

FIGURE 8.10: Interval heap of Figure 8.8 after one node is added.

the root has only one element, the interval heap contains just one element. This element is both the minimum and maximum element. 3. An interval heap can be represented compactly by mapping into an array as is done for ordinary heaps. However, now, each array position must have space for two elements. 4. The height of an interval heap with n elements is Θ(log n).

8.3.1

Inserting an Element

Suppose we are to insert an element into the interval heap of Figure 8.8. Since this heap currently has an even number of elements, the heap following the insertion will have an additional node A as is shown in Figure 8.10. The interval for the parent of the new node A is [6, 15]. Therefore, if the new element is between 6 and 15, the new element may be inserted into node A. When the new element is less than the left end point 6 of the parent interval, the new element is inserted into the min heap embedded in the interval heap. This insertion is done using the min heap insertion procedure starting at node A. When the new element is greater than the right end point 15 of the parent interval, the new element is inserted into the max heap embedded in the interval heap. This insertion is done using the max heap insertion procedure starting at node A. If we are to insert the element 10 into the interval heap of Figure 8.8, this element is put into the node A shown in Figure 8.10. To insert the element 3, we follow a path from node A towards the root, moving left end points down until we either pass the root or reach a node whose left end point is ≤ 3. The new element is inserted into the node that now has

© 2005 by Chapman & Hall/CRC

8-8

Handbook of Data Structures and Applications 2,30 3,17

3,15

4,12 4,10

3,11 5,11

5,9

5,10 4,7

8,8

4,15 7,9

6

FIGURE 8.11: The interval heap of Figure 8.8 with 3 inserted.

2,40 3,17

4,30

4,12 4,10

3,11 5,11

5,9

5,10 4,7

8,8

6,15 7,9

15

FIGURE 8.12: The interval heap of Figure 8.8 with 40 inserted.

no left end point. Figure 8.11 shows the resulting interval heap. To insert the element 40 into the interval heap of Figure 8.8, we follow a path from node A (see Figure 8.10) towards the root, moving right end points down until we either pass the root or reach a node whose right end point is ≥ 40. The new element is inserted into the node that now has no right end point. Figure 8.12 shows the resulting interval heap. Now, suppose we wish to insert an element into the interval heap of Figure 8.12. Since this interval heap has an odd number of elements, the insertion of the new element does not increase the number of nodes. The insertion procedure is the same as for the case when we initially have an even number of elements. Let A denote the last node in the heap. If the new element lies within the interval [6, 15] of the parent of A, then the new element is inserted into node A (the new element becomes the left end point of A if it is less than the element currently in A). If the new element is less than the left end point 6 of the parent of A, then the new element is inserted into the embedded min heap; otherwise, the new element is inserted into the embedded max heap. Figure 8.13 shows the result of inserting the element 32 into the interval heap of Figure 8.12.

8.3.2

Removing the Min Element

The removal of the minimum element is handled as several cases: 1. When the interval heap is empty, the removeM in operation fails. 2. When the interval heap has only one element, this element is the element to be returned. We leave behind an empty interval heap. 3. When there is more than one element, the left end point of the root is to be

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-9 2,40

B 3,17

4,32 3,11 C

4,12 4,10

5,11

5,9

5,10

4,7 D 8,8

6,30 7,9

15,15

FIGURE 8.13: The interval heap of Figure 8.12 with 32 inserted.

3,40 3,17

4,32

4,12 4,10

4,15 5,11

5,9

5,10 7,11

8,8

6,30 7,9

15

FIGURE 8.14: The interval heap of Figure 8.13 with minimum element removed.

returned. This point is removed from the root. If the root is the last node of the interval heap, nothing more is to be done. When the last node is not the root node, we remove the left point p from the last node. If this causes the last node to become empty, the last node is no longer part of the heap. The point p removed from the last node is reinserted into the embedded min heap by beginning at the root. As we move down, it may be necessary to swap the current p with the right end point r of the node being examined to ensure that p ≤ r. The reinsertion is done using the same strategy as used to reinsert into an ordinary heap. Let us remove the minimum element from the interval heap of Figure 8.13. First, the element 2 is removed from the root. Next, the left end point 15 is removed from the last node and we begin the reinsertion procedure at the root. The smaller of the min heap elements that are the children of the root is 3. Since this element is smaller than 15, we move the 3 into the root (the 3 becomes the left end point of the root) and position ourselves at the left child B of the root. Since, 15 ≤ 17 we do not swap the right end point of B with the current p = 15. The smaller of the left end points of the children of B is 3. The 3 is moved from node C into node B as its left end point and we position ourselves at node C. Since p = 15 > 11, we swap the two and 15 becomes the right end point of node C. The smaller of left end points of Cs children is 4. Since this is smaller than the current p = 11, it is moved into node C as this node’s left end point. We now position ourselves at node D. First, we swap p = 11 and Ds right end point. Now, since D has no children, the current p = 7 is inserted into node D as Ds left end point. Figure 8.14 shows the result. The max element may removed using an analogous procedure.

© 2005 by Chapman & Hall/CRC

8-10

8.3.3

Handbook of Data Structures and Applications

Initializing an Interval Heap

Interval heaps may be initialized using a strategy similar to that used to initialize ordinary heaps–work your way from the heap bottom to the root ensuring that each subtree is an interval heap. For each subtree, ﬁrst order the elements in the root; then reinsert the left end point of this subtree’s root using the reinsertion strategy used for the removeM in operation, then reinsert the right end point of this subtree’s root using the strategy used for the removeM ax operation.

8.3.4

Complexity of Interval Heap Operations

The operations isEmpty(), size(), getM in(), and getM ax() take O(1) time each; put(x), removeM in(), and removeM ax() take O(log n) each; and initializing an n element interval heap takes O(n) time.

8.3.5

The Complementary Range Search Problem

In the complementary range search problem, we have a dynamic collection (i.e., points are added and removed from the collection as time goes on) of one-dimensional points (i.e., points have only an x-coordinate associated with them) and we are to answer queries of the form: what are the points outside of the interval [a, b]? For example, if the point collection is 3, 4, 5, 6, 8, 12, the points outside the range [5, 7] are 3, 4, 8, 12. When an interval heap is used to represent the point collection, a new point can be inserted or an old one removed in O(log n) time, where n is the number of points in the collection. Note that given the location of an arbitrary element in an interval heap, this element can be removed from the interval heap in O(log n) time using an algorithm similar to that used to remove an arbitrary element from a heap. The complementary range query can be answered in Θ(k) time, where k is the number of points outside the range [a, b]. This is done using the following recursive procedure: 1. If the interval tree is empty, return. 2. If the root interval is contained in [a, b], then all points are in the range (therefore, there are no points to report), return. 3. Report the end points of the root interval that are not in the range [a, b]. 4. Recursively search the left subtree of the root for additional points that are not in the range [a, b]. 5. Recursively search the right subtree of the root for additional points that are not in the range [a, b]. 6. return Let us try this procedure on the interval heap of Figure 8.13. The query interval is [4, 32]. We start at the root. Since the root interval is not contained in the query interval, we reach step 3 of the procedure. Whenever step 3 is reached, we are assured that at least one of the end points of the root interval is outside the query interval. Therefore, each time step 3 is reached, at least one point is reported. In our example, both points 2 and 40 are outside the query interval and so are reported. We then search the left and right subtrees of the root for additional points. When the left subtree is searched, we again determine that the root interval is not contained in the query interval. This time only one of the root interval points (i.e., 3) is to be outside the query range. This point is reported and we proceed to search the left and right subtrees of B for additional points outside the query range. Since

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-11

the interval of the left child of B is contained in the query range, the left subtree of B contains no points outside the query range. We do not explore the left subtree of B further. When the right subtree of B is searched, we report the left end point 3 of node C and proceed to search the left and right subtrees of C. Since the intervals of the roots of each of these subtrees is contained in the query interval, these subtrees are not explored further. Finally, we examine the root of the right subtree of the overall tree root, that is the node with interval [4, 32]. Since this node’s interval is contained in the query interval, the right subtree of the overall tree is not searched further. The complexity of the above six step procedure is Θ(number of interval heap nodes visited). The nodes visited in the preceding example are the root and its two children, node B and its two children, and node C and its two children. Thus, 7 nodes are visited and a total of 4 points are reported. We show that the total number of interval heap nodes visited is at most 3k + 1, where k is the number of points reported. If a visited node reports one or two points, give the node a count of one. If a visited node reports no points, give it a count of zero and add one to the count of its parent (unless the node is the root and so has no parent). The number of nodes with a nonzero count is at most k. Since no node has a count more than 3, the sum of the counts is at most 3k. Accounting for the possibility that the root reports no point, we see that the number of nodes visited is at most 3k + 1. Therefore, the complexity of the search is Θ(k). This complexity is asymptotically optimal because every algorithm that reports k points must spend at least Θ(1) time per reported point. In our example search, the root gets a count of 2 (1 because it is visited and reports at least one point and another 1 because its right child is visited but reports no point), node B gets a count of 2 (1 because it is visited and reports at least one point and another 1 because its left child is visited but reports no point), and node C gets a count of 3 (1 because it is visited and reports at least one point and another 2 because its left and right children are visited and neither reports a point). The count for each of the remaining nodes in the interval heap is 0.

8.4

Min-Max Heaps

In the min-max heap structure [2], all n DEPQ elements are stored in an n-node complete binary tree with alternating levels being min levels and max levels (Figure 8.15, nodes at max levels are shaded). The root level of a min-max heap is a min level. Nodes on a min level are called min nodes while those on a max level are max nodes. Every min (max) node has the property that its value is the smallest (largest) value in the subtree of which it is the root. Since 5 is in a min node of Figure 8.15, it is the smallest value in its subtree. Also, since 30 and 26 are in max nodes, these are the largest values in the subtrees of which they are the root. The following observations are a direct consequence of the deﬁnition of a min-max heap. 1. When n = 0, there is no min nor max element. 2. When n = 1, the element in the root is both the min and the max element. 3. When n > 1, the element in the root is the min element; the max element is one of the up to two children of the root. From these observations, it follows that getM in() and getM ax() can be done in O(1) time each.

© 2005 by Chapman & Hall/CRC

8-12

Handbook of Data Structures and Applications

min

5 30 10 12

16 14

max

26

25

20 21

18

22

min max

FIGURE 8.15: A 12-element min-max heap.

min

5 30 10 12

16 14

max

26

25

20 21

22

18

min max

FIGURE 8.16: A 13-node complete binary tree.

8.4.1

Inserting an Element

When inserting an element newElement into a min-max heap that has n elements, we go from a complete binary tree that has n nodes to one that has n+1 nodes. So, for example, an insertion into the 12-element min-max heap of Figure 8.15 results in the 13-node complete binary tree of Figure 8.16. When n = 0, the insertion simply creates a min-max heap that has a single node that contains the new element. Assume that n > 0 and let the element in the parent, parentN ode, of the new node j be parentElement. If newElement is placed in the new node j, the min- and max-node property can be violated only for nodes on the path from the root to parentN ode. So, the insertion of an element need only be concerned with ensuring that nodes on this path satisfy the required min- and max-node property. There are three cases to consider. 1. parentElement = newElement In this case, we may place newElement into node j. With such a placement, the min- and max-node properties of all nodes on the path from the root to parentN ode are satisﬁed. 2. parentN ode > newElement

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-13

min

2 30 10 12

16 14

max

26

25

5 21

22

18 20

min max

FIGURE 8.17: Min-max heap of Figure 8.15 following insertion of 2.

If parentN ode is a min node, we get a min-node violation. When a min-node violation occurs, we know that all max nodes on the path from the root to parentN ode are greater than newElement. So, a min-node violation may be ﬁxed by using the trickle-up process used to insert into a min heap; this trickleup process involves only the min nodes on the path from the root to parentN ode. For example, suppose that we are to insert newElement = 2 into the min-max heap of Figure 8.15. The min nodes on the path from the root to parentN ode have values 5 and 20. The 20 and the 5 move down on the path and the 2 trickles up to the root node. Figure 8.17 shows the result. When newElement = 15, only the 20 moves down and the sequence of min nodes on the path from the root to j have values 5, 15, 20. The case when parentN ode is a max node is similar. 3. parentN ode < newElement When parentN ode is a min node, we conclude that all min nodes on the path from the root to parentN ode are smaller than newElement. So, we need be concerned only with the max nodes (if any) on the path from the root to parentN ode. A trickle-up process is used to correctly position newElement with respect to the elements in the max nodes of this path. For the example of Figure 8.16, there is only one max node on the path to parentN ode. This max node has the element 26. If newElement > 26, the 26 moves down to j and newElement trickles up to the former position of 26 (Figure 8.18 shows the case when newElement = 32). If newElement < 26, newElement is placed in j. The case when parentN ode is a max node is similar. Since the height of a min-max heap is Θ(log n) and a trickle-up examines a single element at at most every other level of the min-max heap, an insert can be done in O(log n) time.

8.4.2

Removing the Min Element

When n = 0, there is no min element to remove. When n = 1, the min-max heap becomes empty following the removal of the min element, which is in the root. So assume that n > 1. Following the removal of the min element, which is in the root, we need to go from an n-element complete binary tree to an (n − 1)-element complete binary tree. This causes the element in position n of the min-max heap array to drop out of the min-max

© 2005 by Chapman & Hall/CRC

8-14

Handbook of Data Structures and Applications

min

5 30 10 12

16 14

max

32

25

20 21

22

18 26

min max

FIGURE 8.18: The min-max heap of Figure 8.15 following the insertion of 32.

min

22 30 10 12

16 14

max

26

25

20

18

21

min max

FIGURE 8.19: Situation following a remove min from Figure 8.15.

heap. Figure 8.17 shows the situation following the removal of the min element, 5, from the min-max heap of Figure 8.15. In addition to the 5, which was the min element and which has been removed from the min-max heap, the 22 that was in position n = 12 of the min-max heap array has dropped out of the min-max heap. To get the dropped-out element 22 back into the min-max heap, we perform a trickle-down operation that begins at the root of the min-max heap. The trickle-down operation for min-max heaps is similar to that for min and max heaps. The root is to contain the smallest element. To ensure this, we determine the smallest element in a child or grandchild of the root. If 22 is ≤ the smallest of these children and grandchildren, the 22 is placed in the root. If not, the smallest of the children and grandchildren is moved to the root; the trickle-down process is continued from the position vacated by the just moved smallest element. In our example, examining the children and grandchildren of the root of Figure 8.19, we determine that the smallest of these is 10. Since 10 < 22, the 10 moves to the root and the 22 trickles down (Figure 8.20). A special case arises when this trickle down of the 22 by 2 levels causes the 22 to trickle past a smaller element (in our example, we trickle past a larger element 30). When this special case arises, we simply exchange the 22 and the smaller element being trickled past. The trickle-down process applied at the vacant node

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-15

min

10 30 22 12

14

max

26 16 25

20 21

18

min max

FIGURE 8.20: Situation following one iteration of the trickle-down process. of Figure 8.20 results in the 22 being placed into the vacant node. Suppose that droppedElement is the element dropped from minmaxHeap[n] when a remove min is done from an n-element min-max heap. The following describes the trickledown process used to reinsert the dropped element. 1. The root has no children. In this case droppedElement is inserted into the root and the trickle down terminates. 2. The root has at least one child. Now the smallest key in the min-max heap is in one of the children or grandchildren of the root. We determine which of these nodes has the smallest key. Let this be node k. The following possibilities need to be considered: (a) droppedElement ≤ minmaxHeap[k]. droppedElement may be inserted into the root, as there is no smaller element in the heap. The trickle down terminates. (b) droppedElement > minmaxHeap[k] and k is a child of the root. Since k is a max node, it has no descendants larger than minmaxHeap[k]. Hence, node k has no descendants larger than droppedElement. So, the minmaxHeap[k] may be moved to the root, and droppedElement placed into node k. The trickle down terminates. (c) droppedElement > minmaxHeap[k] and k is a grandchild of the root. minmaxHeap[k] is moved to the root. Let p be the parent of k. If droppedElement > minmaxHeap[p], then minmaxHeap[p] and droppedElement are interchanged. This interchange ensures that the max node p contains the largest key in the subheap with root p. The trickle down continues with k as the root of a min-max (sub) heap into which an element is to be inserted. The complexity of the remove-min operation is readily seen to be O(log n). The removemax operation is similar to the remove-min operation, and min-max heaps may be initialized in Θ(n) time using an algorithm similar to that used to initialize min and max heaps [15].

© 2005 by Chapman & Hall/CRC

8-16

Handbook of Data Structures and Applications

3

20

7 9

5 15

11

18 12

16

10

FIGURE 8.21: An 11-element deap.

8.5

Deaps

The deap structure of [4] is similar to the two-heap structures of [5, 16, 17, 21]. At the conceptual level, we have a min heap and a max heap. However, the distribution of elements between the two is not n/2 and n/2 . Rather, we begin with an (n + 1)-node complete binary tree. Its left subtree is the min heap and its right subtree is the max heap (Figure 8.21, max-heap nodes are shaded). The correspondence property for deaps is slightly more complex than that for the two-heap structures of [5, 16, 17, 21]. A deap is a complete binary tree that is either empty or satisﬁes the following conditions: 1. The root is empty. 2. The left subtree is a min heap and the right subtree is a max heap. 3. Correspondence property. Suppose that the right subtree is not empty. For every node x in the left subtree, deﬁne its corresponding node y in the right subtree to be the node in the same position as x. In case such a y doesn’t exist, let y be the corresponding node for the parent of x. The element in x is ≤ the element in y. For the example complete binary tree of Figure 8.21, the corresponding nodes for the nodes with 3, 7, 5, 9, 15, 11, and 12, respectively, have 20, 18, 16, 10, 18, 16, and 16. Notice that every node y in the max heap has a unique corresponding node x in the min heap. The correspondence property for max-heap nodes is that the element in y be ≥ the element in x. When the correspondence property is satisﬁed for all nodes in the min heap, this property is also satisﬁed for all nodes in the max heap. We see that when n = 0, there is no min or max element, when n = 1, the root of the min heap has both the min and the max element, and when n > 1, the root of the min heap is the min element and the root of the max heap is the max element. So, both getM in() and getM ax() may be implemented to work in O(1) time.

8.5.1

Inserting an Element

When an element is inserted into an n-element deap, we go form a complete binary tree that has n + 1 nodes to one that has n + 2 nodes. So, the shape of the new deap is well deﬁned. Following an insertion, our 11-element deap of Figure 8.21 has the shape shown in Figure 8.22. The new node is node j and its corresponding node is node i.

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-17

3

20

7 9

5 15

11

18 12

16

10

j

i FIGURE 8.22: Shape of a 12-element deap.

2

20

3 9

5 7

11

18 12

10

16 15

FIGURE 8.23: Deap of Figure 8.21 with 2 inserted.

To insert newElement, temporarily place newElement into the new node j and check the correspondence property for node j. If the property isn’t satisﬁed, swap newElement and the element in its corresponding node; use a trickle-up process to correctly position newElement in the heap for the corresponding node i. If the correspondence property is satisﬁed, do not swap newElement; instead use a trickle-up process to correctly place newElement in the heap that contains node j. Consider the insertion of newElement = 2 into Figure 8.22. The element in the corresponding node i is 15. Since the correspondence property isn’t satisﬁed, we swap 2 and 15. Node j now contains 15 and this swap is guaranteed to preserve the max-heap properties of the right subtree of the complete binary tree. To correctly position the 2 in the left subtree, we use the standard min-heap trickle-up process beginning at node i. This results in the conﬁguration of Figure 8.23. To insert newElement = 19 into the deap of Figure 8.22, we check the correspondence property between 15 and 19. The property is satisﬁed. So, we use the trickle-up process for max heaps to correctly position newElement in the max heap. Figure 8.24 shows the result. Since the height of a deap is Θ(log n), the time to insert into a deap is O(log n).

© 2005 by Chapman & Hall/CRC

8-18

Handbook of Data Structures and Applications

3

20

7 9

5 15

11

19 12

10

16 18

FIGURE 8.24: Deap of Figure 8.21 with 19 inserted.

5

20

7 9

10 15

11

18

16

12

FIGURE 8.25: Deap of Figure 8.21 following a remove min operation.

8.5.2

Removing the Min Element

Assume that n > 0. The min element is in the root of the min heap. Following its removal, the deap size reduces to n − 1 and the element in position n + 1 of the deap array is dropped from the deap. In the case of our example of Figure 8.21, the min element 3 is removed and the 10 is dropped. To reinsert the dropped element, we ﬁrst trickle the vacancy in the root of the min heap down to a leaf of the min heap. This is similar to a standard min-heap trickle down with ∞ as the reinsert element. For our example, this trickle down causes 5 and 11 to, respectively, move to their parent nodes. Then, the dropped element 10 is inserted using a trickle-up process beginning at the vacant leaf of the min heap. The resulting deap is shown in Figure 8.25. Since a removeM in requires a trickle-down pass followed by a trickle-up pass and since the height of a deap is Θ(log n), the time for a removeM in is O(log n). A removeM ax is similar. Also, we may initialize a deap in Θ(n) time using an algorithm similar to that used to initialize a min or max heap [15].

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-19

2

7

5 6

4 7

6 5

min heap

2 4

max heap

FIGURE 8.26: Dual heap.

8.6 8.6.1

Generic Methods for DEPQs Dual Priority Queues

General methods [8] exist to arrive at eﬃcient DEPQ data structures from single-ended priority queue data structures that also provide an eﬃcient implementation of the remove (theN ode) operation (this operation removes the node theN ode from the PQ). The simplest of these methods, dual structure method, maintains both a min PQ (called minP Q) and a max PQ (called maxP Q) of all the DEPQ elements together with correspondence pointers between the nodes of the min PQ and the max PQ that contain the same element. Figure 8.26 shows a dual heap structure for the elements 6, 7, 2, 5, 4. Correspondence pointers are shown as double-headed arrows. Although Figure 8.26 shows each element stored in both the min and the max heap, it is necessary to store each element in only one of the two heaps. The minimum element is at the root of the min heap and the maximum element is at the root of the max heap. To insert an element x, we insert x into both the min and the max heaps and then set up correspondence pointers between the locations of x in the min and max heaps. To remove the minimum element, we do a removeM in from the min heap and a remove(theN ode), where theN ode is the corresponding node for the removed element, from the max heap. The maximum element is removed in an analogous way.

8.6.2

Total Correspondence

The notion of total correspondence borrows heavily from the ideas used in a twin heap [21]. In the twin heap data structure n elements are stored in a min heap using an array minHeap[1 : n] and n other elements are stored in a max heap using the array maxHeap[1 : n]. The min and max heaps satisfy the inequality minHeap[i] ≤ maxHeap[i], 1 ≤ i ≤ n. In this way, we can represent a DEPQ with 2n elements. When we must represent a DEPQ with an odd number of elements, one element is stored in a buﬀer, and the remaining elements are divided equally between the arrays minHeap and maxHeap. In total correspondence, we remove the positional requirement in the relationship between pairs of elements in the min heap and max heap. The requirement becomes: for each element a in minP Q there is a distinct element b in maxP Q such that a ≤ b and vice versa. (a, b) is a corresponding pair of elements. Figure 8.27(a) shows a twin heap with 11

© 2005 by Chapman & Hall/CRC

8-20

Handbook of Data Structures and Applications 2

10

4

6

3

8

6

7

buffer = 9 (a) Twin heap

2

5

6

3

4

10

6

6

7

6

8

5

buffer = 9 (b) Total correspondence heap

FIGURE 8.27: Twin heap and total correspondence heap.

elements and Figure 8.27(b) shows a total correspondence heap. The broken arrows connect corresponding pairs of elements. In a twin heap the corresponding pairs (minHeap[i], maxHeap[i]) are implicit, whereas in a total correspondence heap these pairs are represented using explicit pointers. In a total correspondence DEPQ, the number of nodes is either n or n − 1. The space requirement is half that needed by the dual priority queue representation. The time required is also reduced. For example, if we do a sequence of inserts, every other one simply puts the element in the buﬀer. The remaining inserts put one element in maxP Q and one in minP Q. So, on average, an insert takes time comparable to an insert in either maxP Q or minP Q. Recall that when dual priority queues are used the insert time is the sum of the times to insert into maxP Q and minP Q. Note also that the size of maxP Q and minP Q together is half that of a dual priority queue. If we assume that the complexity of the insert operation for priority queues as well as 2 remove(theN ode) operations is no more than that of the delete max or min operation (this is true for all known priority queue structures other than weight biased leftist trees [6]), then the complexity of removeM ax and removeM in for total correspondence DEPQs is the same as for the removeM ax and removeM in operation of the underlying priority queue data structure. Using the notion of total correspondence, we trivially obtain eﬃcient DEPQ structures starting with any of the known priority queue structures (other than weight biased leftist trees [6]). The removeM ax and removeM in operations can generally be programmed to run faster than suggested by our generic algorithms. This is because, for example, a removeM ax() and put(x) into a max priority queue can often be done faster as a single operation changeM ax(x). Similarly a remove(theN ode) and put(x) can be programmed as a change (theN ode, x) operation.

8.6.3

Leaf Correspondence

In leaf correspondence DEPQs, for every leaf element a in minP Q, there is a distinct element b in maxP Q such that a ≤ b and for every leaf element c in maxP Q there is a distinct element d in minP Q such that d ≤ c. Figure 8.28 shows a leaf correspondence heap. Eﬃcient leaf correspondence DEPQs may be constructed easily from PQs that satisfy the following requirements [8]: (a) The PQ supports the operation remove(Q, p) eﬃciently. (b) When an element is inserted into the PQ, no nonleaf node becomes a leaf node (except possibly the node for the newly inserted item).

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues

8-21

2

3

4

10

6

6

7

6

8

5

buffer = 9 FIGURE 8.28: Leaf correspondence heap. (c) When an element is deleted (using remove, removeM ax or removeM in) from the PQ, no nonleaf node (except possibly the parent of the deleted node) becomes a leaf node. Some of the PQ structures that satisfy these requirements are height-biased leftist trees (Chapter 5) [9, 15, 20], pairing heaps (Chapter 7) [12, 19], and Fibonacci heaps [13] (Chapter 7). Requirements (b) and (c) are not satisﬁed, for example, by ordinary heaps and the FMPQ structure of [3]. Although heaps and Brodal’s FMPQ structure do not satisfy the requirements of our generic approach to build a leaf correspondence DEPQ structure from a priority queue, we can nonetheless arrive at leaf correspondence heaps and leaf correspondence FMPQs using a customized approach.

8.7

Meldable DEPQs

A meldable DEPQ (MDEPQ) is a DEPQ that, in addition to the DEPQ operations listed above, includes the operation meld(x, y) ... meld the DEPQs x and y into a single DEPQ The result of melding the double-ended priority queues x and y is a single double-ended priority queue that contains all elements of x and y. The meld operation is destructive in that following the meld, x and y do not remain as independent DEPQs. To meld two DEPQs in less than linear time, it is essential that the DEPQs be represented using explicit pointers (rather than implicit ones as in the array representation of a heap) as otherwise a linear number of elements need to be moved from their initial to their ﬁnal locations. Olariu et al. [17] have shown that when the min-max pair heap is represented in such a way, an n element DEPQ √ may be melded with a k element one (k ≤ n) in O(log(n/k) ∗ log k) time. When k = n, this is O(log2 n). Hasham and Sack [14] have shown that the complexity of melding two min-max heaps of size n and k, respectively, is Ω(n + k). Brodal [3] has developed an MDEPQ implementation that allows one to ﬁnd the min and max elements, insert an element, and meld two priority queues in O(1) time. The time needed to delete the minimum or maximum element is O(log n). Although the asymptotic complexity provided by this data structure are the best one can hope for [3], the data structure has practical limitations. First, each element is represented twice using

© 2005 by Chapman & Hall/CRC

8-22

Handbook of Data Structures and Applications

a total of 16 ﬁelds per element. Second, even though the delete operations have O(log n) complexity, the constant factors are very high and the data structure will not perform well unless ﬁnd, insert, and meld are the primary operations. Cho and Sahni [7] have shown that leftist trees [9, 15, 20] may be adapted to obtain a simple representation for MDEPQs in which meld takes logarithmic time and the remaining operations have the same asymptotic complexity as when any of the aforementioned DEPQ representations is used. Chong and Sahni [8] study MDEPQs based on pairing heaps [12, 19], Binomial and Fibonacci heaps [13], and FMPQ [3]. Since leftist heaps, pairing heaps, Binomial and Fibonacci heaps, and FMPQs are meldable priority queues that also support the remove(theN ode) operation, the MDEPQs of [7, 8] use the generic methods of Section 8.6 to construct an MDEPQ data structure from the corresponding MPQ (meldable PQ) structure. It is interesting to note that if we use the FMPQ structure of [3] as the base MPQ structure, we obtain a total correspondence MDEPQ structure in which removeM ax and removeM in take logarithmic time, and the remaining operations take constant time. This adaptation is superior to the dual priority queue adaptation proposed in [3] because the space requirements are almost half. Additionally, the total correspondence adaptation is faster. Although Brodal’s FMPQ structure does not satisfy the requirements of the generic approach to build a leaf correspondence MDEPQ structure from a priority queue, we can nonetheless arrive at leaf correspondence FMPQs using a customized approach.

Acknowledgment This work was supported, in part, by the National Science Foundation under grant CCR9912395.

References [1] A. Arvind and C. Pandu Rangan, Symmetric min-max heap: A simpler data structure for double-ended priority queue, Information Processing Letters, 69, 1999, 197-199. [2] M. Atkinson, J. Sack, N. Santoro, and T. Strothotte, Min-max heaps and generalized priority queues, Communications of the ACM, 29, 996-1000, 1986. [3] G. Brodal, Fast meldable priority queues, Workshop on Algorithms and Data Structures, 1995. [4] S. Carlsson, The deap — A double ended heap to implement double ended priority queues, Information Processing Letters, 26, 33-36, 1987. [5] S. Chang and M. Du, Diamond deque: A simple data structure for priority deques, Information Processing Letters, 46, 231-237, 1993. [6] S. Cho and S. Sahni, Weight biased leftist trees and modiﬁed skip lists, ACM Jr. on Experimental Algorithms, Article 2, 1998. [7] S. Cho and S. Sahni, Mergeable double ended priority queue, International Journal on Foundation of Computer Sciences, 10, 1, 1999, 1-18. [8] K. Chong and S. Sahni, Correspondence based data structures for double ended priority queues, ACM Jr. on Experimental Algorithmics, Volume 5, 2000, Article 2, 22 pages. [9] C. Crane, Linear lists and priority queues as balanced binary trees, Technical Report CS-72-259, Computer Science Department, Stanford University, [10] Y. Ding and M. Weiss, The Relaxed Min-Max Heap: A Mergeable Double-Ended Priority Queue, Acta Informatica, 30, 215-231, 1993. [11] Y. Ding and M. Weiss, On the Complexity of Building an Interval Heap, Information Processing Letters, 50, 143-144, 1994.

© 2005 by Chapman & Hall/CRC

Double-Ended Priority Queues [12] M. L. Fredman, R. Sedgewick, D. D. Sleator, and R. E. Tarjan, The paring heap : A new form of self-adjusting heap, Algorithmica, 1:111-129, 1986. [13] M. Fredman and R. Tarjan, Fibonacci heaps and their uses in improved network optimization algorithms, JACM, 34:3, 596-615, 1987. [14] A. Hasham and J. Sack, Bounds for min-max heaps, BIT, 27, 315-323, 1987. [15] E. Horowitz, S. Sahni, D. Mehta, Fundamentals of Data Structures in C++, Computer Science Press, NY, 1995. [16] J. van Leeuwen and D. Wood, Interval heaps, The Computer Journal, 36, 3, 209-216, 1993. [17] S. Olariu, C. Overstreet, and Z. Wen, A mergeable double-ended priority queue, The Computer Journal, 34, 5, 423-427, 1991. [18] D. Sleator and R. Tarjan, Self-adjusting binary search trees, JACM, 32:3, 652-686, 1985. [19] J. T. Stasko and J. S. Vitter, Pairing heaps : Experiments and Analysis, Communication of the ACM, 30:3, 234-249, 1987. [20] R. Tarjan, Data structures and network algorithms, SIAM, Philadelphia, PA, 1983. [21] J. Williams, Algorithm 232, Communications of the ACM, 7, 347-348, 1964.

© 2005 by Chapman & Hall/CRC

8-23

III Dictionary Structures 9 Hash Tables

Pat Morin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction • Hash Tables for Integer Keys Other Developments

•

Random Probing

•

Historical Notes

9-1 •

10 Balanced Binary Search Trees Arne Andersson, Rolf Fagerberg, and Kim S. Larsen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 Introduction • Basic Deﬁnitions • Generic Discussion of Balancing • Classic Balancing Schemes • Rebalancing a Tree to Perfect Balance • Schemes with no Balance Information • Low Height Schemes • Relaxed Balance

11 Finger Search Trees

Gerth Stølting Brodal . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

Finger Searching • Dynamic Finger Search Trees domized Finger Search Trees • Applications

•

Level Linked (2,4)-Trees

•

Ran-

Sanjeev Saxena . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

12 Splay Trees

Introduction • Splay Trees • Analysis • Optimality of Splay Trees • Linking and Cutting Trees • Case Study: Application to Network Flows • Implementation Without Linking and Cutting Trees • FIFO: Dynamic Tree Implementation • Variants of Splay Trees and Top-Down Splaying

13 Randomized Dictionary Structures

C. Pandu Rangan . . . . . . . . . . . . . . 13-1

Introduction • Preliminaries • Skip Lists • Structural Properties of Skip Lists • Dictionary Operations • Analysis of Dictionary Operations • Randomized Binary Search Trees • Bibliographic Remarks

14 Trees with Minimum Weighted Path Length

Wojciech Rytter . . . . 14-1

Introduction • Huﬀman Trees • Height Limited Huﬀman Trees • Optimal Binary Search Trees • Optimal Alphabetic Tree Problem • Optimal Lopsided Trees • Parallel Algorithms

15 B Trees

Donghui Zhang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1

Introduction Discussions

© 2005 by Chapman & Hall/CRC

•

The Disk-Based Environment

•

The B-tree

•

The B+-tree

•

Further

9 Hash Tables 9.1 9.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hash Tables for Integer Keys . . . . . . . . . . . . . . . . . . . . . Hashing by Division • Hashing by Multiplication Universal Hashing • Static Perfect Hashing • Dynamic Perfect Hashing

9.3

9-1 9-2

•

Random Probing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9-8

Hashing with Chaining • Hashing with Open Addressing • Linear Probing • Quadratic Probing • Double Hashing • Brent’s Method • Multiple-Choice Hashing • Asymmetric Hashing • LCFS Hashing • Robin-Hood Hashing • Cuckoo Hashing

Pat Morin Carleton University

9.1

9.4 9.5

Historical Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Other Developments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9-15 9-15

Introduction

A set abstract data type (set ADT) is an abstract data type that maintains a set S under the following three operations: 1. Insert(x): Add the key x to the set. 2. Delete(x): Remove the key x from the set. 3. Search(x): Determine if x is contained in the set, and if so, return a pointer to x. One of the most practical and widely used methods of implementing the set ADT is with hash tables. Note that the three set ADT operations can easily be implemented to run in O(log n) time per operation using balanced binary search trees (See Chapter 10). If we assume that the input data are integers in the set U = {0, . . . , u − 1} then they can even be implemented to run in sub-logarithmic time using data structures for integer searching (Chapter 39). However, these data structures actually do more than the three basic operations we require. In particular if we search for an element x that is not present in S then these data structures can report the smallest item in S that is larger than x (the successor of x) and/or the largest item in S that is smaller than x (the predecessor of x). Hash tables do away with this extra functionality of ﬁnding predecessors and successors and only perform exact searches. If we search for an element x in a hash table and x is not present then the only information we obtain is that x ∈ / S. By dropping this extra functionality hash tables can give better performance bounds. Indeed, any reasonable hash table implementation performs each of the three set ADT operations in O(1) expected time.

9-1

© 2005 by Chapman & Hall/CRC

9-2

Handbook of Data Structures and Applications

The main idea behind all hash table implementations discussed in this chapter is to store a set of n = |S| elements in an array (the hash table) A of length m ≥ n. In doing this, we require a function that maps any element x to an array location. This function is called a hash function h and the value h(x) is called the hash value of x. That is, the element x gets stored at the array location A[h(x)]. The occupancy of a hash table is the ratio α = n/m of stored elements to the length of A. The study of hash tables follows two very diﬀerent lines. Many implementations of hash tables are based on the integer universe assumption: All elements stored in the hash table come from the universe U = {0, . . . , u−1}. In this case, the goal is to design a hash function h : U → {0, . . . , m − 1} so that for each i ∈ {0, . . . , m − 1}, the number of elements x ∈ S such that h(x) = i is as small as possible. Ideally, the hash function h would be such that each element of S is mapped to a unique value in {0, . . . , m − 1}. Most of the hash functions designed under the integer universe assumption are number-theoretic constructions. Several of these are described in Section 9.2. Historically, the integer universe assumption seems to have been justiﬁed by the fact that any data item in a computer is represented as a sequence of bits that can be interpreted as a binary number. However, many complicated data items require a large (or variable) number of bits to represent and this make u the size of the universe very large. In many applications u is much larger than the largest integer that can ﬁt into a single word of computer memory. In this case, the computations performed in number-theoretic hash functions become ineﬃcient. This motivates the second major line of research into hash tables. This research work is based on the random probing assumptionrandom probing assumption: Each element x that is inserted into a hash table is a black box that comes with an inﬁnite random probe sequence x0 , x1 , x2 , . . . where each of the xi is independently and uniformly distributed in {0, . . . , m − 1}. Hash table implementations based on the random probing assumption are described in Section 9.3. Both the integer universe assumption and the random probing assumption have their place in practice. When there is an easily computing mapping of data elements onto machine word sized integers then hash tables for integer universes are the method of choice. When such a mapping is not so easy to compute (variable length strings are an example) it might be better to use the bits of the input items to build a good pseudorandom sequence and use this sequence as the probe sequence for some random probing data structure. To guarantee good performance, many hash table implementations require that the occupancy α be a constant strictly less than 1. Since the number of elements in a hash table changes over time, this requires that the array A be resized periodically. This is easily done, without increasing the amortized cost of hash table operations by choosing three constants 0 < α1 < α2 < α3 < 1 so that, whenever n/m is not the interval (α1 , α3 ) the array A is resized so that its size is n/α2 . A simple amortization argument (Chapter 1) shows that the amortized cost of this resizing is O(1) per update (Insert/Delete) operation.

9.2

Hash Tables for Integer Keys

In this section we consider hash tables under the integer universe assumption, in which the key values x come from the universe U = {0, . . . , u − 1}. A hash function h is a function whose domain is U and whose range is the set {0, . . . , m − 1}, m ≤ u. A hash function h is said to be a perfect hash function for a set S ⊆ U if, for every x ∈ S, h(x) is unique. A perfect hash function h for S is minimal if m = |S|, i.e., h is a bijection between S and {0, . . . , m − 1}. Obviously a minimal perfect hash function for S is desirable since it

© 2005 by Chapman & Hall/CRC

Hash Tables

9-3

allows us to store all the elements of S in a single array of length n. Unfortunately, perfect hash functions are rare, even for m much larger than n. If each element of S is mapped independently and uniformly to a random element of {0, . . . , m − 1} then the birthday paradox (See, for example, Feller [27]) states that, if m is much less than n2 then there will almost surely exist two elements of S that have the same hash value. We begin our discussion with two commonly used hashing schemes that are heuristic in nature. That is, we can not make any non-trivial statements about the performance of these schemes when storing an arbitrary set S. We then discuss several schemes that have provably good performance.

9.2.1

Hashing by Division

In hashing by division, we use the hash function h(x) = x mod m . To use this hash function in a data structure, we maintain an array A[0], . . . , A[m− 1] where each element of this array is a pointer to the head of a linked list (Chapter 2). The linked list Li pointed to by the array element A[i] contains all the elements x such that h(x) = i. This technique of maintaining an array of lists is called hashing with chaining. In such a hash table, inserting an element x takes O(1) time; we compute i = h(x) and append (or prepend) x to the list Li . However, searching for and/or deleting an element x is not so easy. We have to compute i = h(x) and then traverse the list Li until we either ﬁnd x or reach the end of the list. The cost of this is proportional to the length of Li . Obviously, if our set S consists of the elements 0, m, 2m, 3m, . . . , nm then all elements are stored in the list L0 and searches and deletions take linear time. However, one hopes that such pathological cases do not occur in practice. For example, if the elements of S are uniformly and independently distributed in U and u is a multiple of m then the expected size of any list Li is only n/m. In this case, searches and deletions take O(1 + α) expected time. To help avoid pathological cases, the choice of m is important. In particular, m a power of 2 is usually avoided since, in a binary computer, taking the remainder modulo a power of 2 means simply discarding some high-order bits. Taking m to be a prime not too close to a power of 2 is recommended [37].

9.2.2

Hashing by Multiplication

The implementation of a hash table using hashing by multiplication is exactly the same as that of hashing by division except that the hash function h(x) = mxA mod m is used. Here A is a real-valued constant whose choice we discuss below. The advantage of the multiplication method is that the value of m is not critical. We can take m to be a power of 2, which makes it convenient for use on binary computers. Although any value of A gives a hash function, some values of A are better than others. (Setting A = 0 is clearly not a good idea.) Knuth [37] suggests using the golden ratio for A, i.e., setting √ A = ( 5 − 1)/2 = 0.6180339887 . . .

© 2005 by Chapman & Hall/CRC

9-4

Handbook of Data Structures and Applications

This choice of A is motivated by a theorem, ﬁrst conjectured by Oderfeld and later proven by Swierczkowski ´ [59]. This theorem states that the sequence mA mod m, 2mA mod m, 3mA mod m, . . . , nmA mod m partitions the interval (0, m) into n + 1 intervals having only three distinct lengths. Furthermore, the next element (n + 1)mA mod m in the sequence is always contained in one of the largest intervals.1 Of course, no matter what value of A we select, the pigeonhole principle implies that for u ≥ nm then there will always exist some hash value i and some S ⊆ U of size n such that h(x) = i for all x ∈ S. In other words, we can always ﬁnd a set S all of whose elements get stored in the same list Li . Thus, the worst case of hashing by multiplication is as bad as hashing by division.

9.2.3

Universal Hashing

The argument used at the end of the previous section applies equally well to any hash function h. That is, if the table size m is much smaller than the universe size u then for any hash function there is some large (of size at least u/m) subset of U that has the same hash value. To get around this diﬃculty we need a collection of hash functions from which we can choose one that works well for S. Even better would be a collection of hash functions such that, for any given S, most of the hash functions work well for S. Then we could simply pick one of the functions at random and have a good chance of it working well. Let H be a collection of hash functions, i.e., functions from U onto {0, . . . , m − 1}. We say that H is universal if, for each x, y ∈ U the number of h ∈ H such that h(x) = h(y) is at most |H|/m. Consider any S ⊆ U of size n and suppose we choose a random hash function h from a universal collection of hash functions. Consider some value x ∈ U . The probability that any key y ∈ S has the same hash value as x is only 1/m. Therefore, the expected number of keys in S, not equal to x, that have the same hash value as x is only (n − 1)/m if x ∈ S nh(x) = n/m if x ∈ /S Therefore, if we store S in a hash table using the hash function h then the expected time to search for, or delete, x is O(1 + α). From the preceding discussion, it seems that a universal collection of hash functions from which we could quickly select one at random would be very handy indeed. With such a collection at our disposal we get an implementation of the set ADT that has O(1) insertion time and O(1) expected search and deletion time. Carter and Wegman [8] describe three diﬀerent collections of universal hash functions. If the universe size u is a prime number2 then H = {hk1 ,k2 ,m (x) = ((k1 x + k2 ) mod u)) mod m : 1 ≤ k1 < u, 0 ≤ k2 < u}

1 In fact, any irrational number has this property [57]. The golden ratio is especially good because it is not too close to a whole number. 2 This is not a major restriction since, for any u > 1, there always exists a prime number in the set {u, u + 1, . . . , 2u}. Thus we can enforce this assumption by increasing the value of u by a constant factor.

© 2005 by Chapman & Hall/CRC

Hash Tables

9-5

is a collection of universal hash functions. Clearly, choosing a function uniformly at random from H can be done easily by choosing two random values k1 ∈ {1, . . . , u − 1} and k2 ∈ {0, . . . , u − 1}. Thus, we have an implementation of the set ADT with O(1) expected time per operation.

9.2.4

Static Perfect Hashing

The result of Carter and Wegman on universal hashing is very strong, and from a practical point of view, it is probably the strongest result most people will ever need. The only thing that could be improved about their result is to make it deterministic, so that the running times of all operations are O(1) worst-case. Unfortunately, this is not possible, as shown by Dietzfelbinger et al. [23]. Since there is no hope of getting O(1) worst-case time for all three set ADT operations, the next best thing would be to have searches that take O(1) worst-case time. In this section we describe the method of Fredman, Koml´ os and Szemer´edi [28]. This is a static data structure that takes as input a set S ⊆ U and builds a data structure of size O(n) that can test if an element x is in S in O(1) worst-case time. Like the universal hash functions from the previous section, this method also requires that u be a prime number. This scheme uses hash functions of the form hk,m (x) = (kx mod u)) mod m .3 Let Bk,m (S, i) be the number of elements x ∈ S such that hk,m (x) = i, i.e., the number of elements of S that have hash value i when using the hash function hk,m . The function Bk,m gives complete information about the distribution of hash values of S. The main lemma used by Fredman et al. is that, if we choose k ∈ U uniformly at random then

m−1 Bk,m (S, i) n2 < . (9.1) E 2 m i=0 There are two important special cases of this result. In the sparse case we take m = n2 /α, for some constant 0 < α < 1. In this case, the expectation in (9.1) is less than α. Therefore, by Markov’s inequality, the probability that this sum is greater than or equal to 1 is at most α. But, since this sum is a non-negative integer, then with probability at least 1 − α it must be equal to 0. In other words, with probability at least 1 − α, Bk,m (S, i) ≤ 1 for all 0 ≤ i ≤ m − 1, i.e., the hash function hk,m is perfect for S. Of course this implies that we can ﬁnd a perfect hash function very quickly by trying a small number of random elements k ∈ U and testing if they result in perfect hash functions. (The expected number of elements that we will have to try is only 1/(1 − α).) Thus, if we are willing to use quadratic space then we can perform searches in O(1) worst-case time. In the dense case we assume that m is close to n and discover that, for many values of k, the hash values are distributed fairly evenly among the set 1, . . . , m. More precisely, if we use a table of size m = n, then

m−1 E Bk,m (S, i)2 ≤ 3n . i=0

3 Actually,

it turns out that any universal hash function also works in the FKS scheme [16, Section 11.5].

© 2005 by Chapman & Hall/CRC

9-6

Handbook of Data Structures and Applications

By Markov’s inequality this means that Pr

m−1

Bk,m (S, i) ≤ 3n/α 2

≥1−α .

(9.2)

i=0

Again, we can quickly ﬁnd a value of k satisfying (9.2) by testing a few randomly chosen values of k. These two properties are enough to build a two-level data structure that uses linear space and executes searches in worst-case constant time. We call the following data structure the FKS-α data structure, after its inventors Fredman, Koml´os and Szemer´edi. At the top level, the data structure consists of an array A[0], . . . , A[m − 1] where m = n. The elements of this array are pointers to other arrays A0 , . . . , Am−1 , respectively. To decide what will be stored in these other arrays, we build a hash function hk,m that satisﬁes the conditions of (9.2). This gives us the top-level hash function hk,m (x) = (kx mod u) mod m. Each element x ∈ S gets stored in the array pointed to by A[hk,m (x)]. What remains is to describe how we use the arrays A0 , . . . , Am−1 . Let Si denote the set of elements x ∈ S such that hk,m (s) = i. The elements of Si will be stored in Ai . The size of Si is ni = Bk,m (S, i). To store the elements of Si we set the size of Ai to mi = ni 2 /α = Bk,n (S, i)2 /α. Observe that, by (9.2), all the Ai ’s take up a total space of m−1 O(n), i.e., i=0 mi = O(n). Furthermore, by trying a few randomly selected integers we can quickly ﬁnd a value ki such that the hash function hki ,mi is perfect for Si . Therefore, we store the element x ∈ Si at position Ai [hki ,mi (x)] and x is the unique element stored at that location. With this scheme we can search for any value x ∈ U by computing two hash values i = hk,m (x) and j = hki ,mi (x) and checking if x is stored in Ai [j]. Building the array A and computing the values of n0 , . . . , nm−1 takes O(n) expected time since for a given value k we can easily do this in O(n) time and the expected number of values of k that we must try before ﬁnding one that satisﬁes (9.2) is O(1). Similarly, building each subarray Ai takes O(ni 2 ) expected time, resulting in an overall expected running time of O(n). Thus, for any constant 0 < α < 1, an FKS-α data structure can be constructed in O(n) expected time and this data structure can execute a search for any x ∈ U in O(1) worst-case time.

9.2.5

Dynamic Perfect Hashing

The FKS-α data structure is nice in that it allows for searches in O(1) time, in the worst case. Unfortunately, it is only static; it does not support insertions or deletions of elements. In this section we describe a result of Dietzfelbinger et al. [23] that shows how the FKS-α data structure can be made dynamic with some judicious use of partial rebuilding (Chapter 10). The main idea behind the scheme is simple: be lazy at both the upper and lower levels of the FKS-α data structure. That is, rebuild parts of the data structure only when things go wrong. At the top level, we relax the condition that the size m of the upper array A is exactly n and allow A to have size anywhere between n and 2n. Similarly, at the lower level we allow the array Ai to have a size mi anywhere between ni 2 /α and 2ni 2 /α. Periodically, we will perform a global rebuilding operation in which we remove all n elements from the hash table. Some elements which have previously been marked as deleted will be discarded, thereby reducing the value of n. We put the remaining elements in a list, and recompute a whole new FKS-(α/2) data structure for the elements in the list. This data structure is identical to the standard FKS-(α/2) data structure except that, at the top level we use an array of size m = 2n.

© 2005 by Chapman & Hall/CRC

Hash Tables

9-7

Searching in this data structure is exactly the same as for the static data structure. To search for an element x we compute i = hk,m (x) and j = hki ,mi (x) and look for x at location Ai [j]. Thus, searches take O(1) worst-case time. Deleting in this data structure is done in the laziest manner possible. To delete an element we only search for it and then mark it as deleted. We will use the convention that this type of deletion does not change the value of n since it does not change the number of elements actually stored in the data structure. While doing this, we also keep track of the number of elements that are marked as deleted. When this number exceeds n/2 we perform a global rebuilding operation. The global rebuilding operation takes O(n) expected time, but only occurs during one out of every n/2 deletions. Therefore, the amortized cost of this operation is O(1) per deletion. The most complicated part of the data structure is the insertion algorithm and its analysis. To insert a key x we know, because of how the search algorithm works, that we must ultimately store x at location Ai [j] where i = hk,m (x) and j = hki ,mi (x). However, several things can go wrong during the insertion of x: 1. The value of n increases by 1, so it may be that n now exceeds m. In this case we perform a global rebuilding operation and we are done. 2 2. We compute i = hk,m (x) and discover that m−1 i=0 ni > 3n/α. In this case, the hash function hk,m used at the top level is no longer any good since it is producing an overall hash table that is too large. In this case we perform a global rebuilding operation and we are done. 3. We compute i = hk,m (x) and discover that, since the value of ni just increased by one, ni 2 /α > mi . In this case, the array Ai is too small to guarantee that we can quickly ﬁnd a perfect hash function. To handle this, we copy the elements of Ai into a list L and allocate a new array Ai with the new size mi = 2ni 2 /α. We then ﬁnd a new value ki such that hki ,mi is a perfect hash function for the elements of L and we are done. 4. The array location Ai [j] is already occupied by some other element y. But in this case, we know that Ai is large enough to hold all the elements (otherwise we would already be done after Case 3), but the value ki being used in the hash function hki ,mi is the wrong one since it doesn’t give a perfect hash function for Si . Therefore we simply try new values for ki until we ﬁnd a ﬁnd a value ki that yields a perfect hash function and we are done. If none of the preceding 4 cases occurs then we can simply place x at location Ai [j] and we are done. Handling Case 1 takes O(n) expected time since it involves a global rebuild of the entire data structure. However, Case 1 only happens during one out of every Θ(n) insertions, so the amortized cost of all occurrences of Case 1 is only O(1) per insertion. Handling Case 2 also takes O(n) expected time. The question is: How often does Case 2 occur? To answer this question, consider the phase that occurs between two consecutive occurrences of Case 1. During this phase, the data structure holds at most m distinct elements. Call this set of elements S. With probability at least (1 − α) the hash function hk,m selected at the beginning of the phase satisﬁes (9.2) so that Case 2 never occurs during the phase. Similarly, the probability that Case 2 occurs exactly once during the phase is at most α(1 − α). In general, the probability that Case 2 occurs exactly i times during a phase is at most αi (1 − α). Thus, the expected cost of handling all occurrences of Case 2

© 2005 by Chapman & Hall/CRC

9-8

Handbook of Data Structures and Applications

during the entire phase is at most ∞

αi (1 − α)i × O(n) = O(n) .

i=0

But since a phase involves Θ(n) insertions this means that the amortized expected cost of handling Case 2 is O(1) per insertion. Next we analyze the total cost of handling Case 3. Deﬁne a subphase as the period of time between two global rebuilding operations triggered either as a result of a deletion, Case 1 or Case 2. We will show that the total cost of handling all occurrences of Case 3 during a subphase is O(n) and since a subphase takes Θ(n) time anyway this does not contribute to the cost of a subphase by more than a constant factor. When Case 3 occurs at the array Ai it takes O(mi ) time. However, while handling Case 3, mi increases by a constant factor, so the total cost of handling Case 3 for Ai is dominated by the value of mi at the end m−1 of the subphase. But we maintain the invariant that i=0 mi = O(n) during the entire subphase. Thus, handling all occurrences of Case 3 during a subphase only requires O(n) time. Finally, we consider the cost of handling Case 4. For a particular array Ai , consider the subsubphase between which two occurrences of Case 3 cause Ai to be rebuilt or a global rebuilding operation takes place. During this subsubphase the number of distinct elements √ that occupy Ai is at most α mi . Therefore, with probability at least 1 − α any randomly chosen value of ki ∈ U is a perfect hash function for this set. Just as in the analysis of Case 2, this implies that the expected cost of handling all occurrences of Case 3 at Ai during a subsubphase is only O(mi ). Since a subsubphase ends with rebuilding all of Ai or a global rebuilding, at a cost of Ω(mi ) all the occurrences of Case 4 during a subsubphase do not contribute to the expected cost of the subsubphase by more than a constant factor. To summarize, we have shown that the expected cost of handling all occurrences of Case 4 is only a constant factor times the cost of handling all occurrences of Case 3. The cost of handling all occurrences of Case 3 is no more than a constant factor times the expected cost of all global rebuilds. The cost of handling all the global rebuilds that occur as a result of Case 2 is no more than a constant factor times the cost of handling all occurrences of global rebuilds that occur as a consequence of Case 1. And ﬁnally, the cost of all global rebuilds that occur as a result of Case 1 or of deletions is O(n) for a sequence of n update operations. Therefore, the total expected cost of n update operation is O(n).

9.3

Random Probing

Next we consider hash table implementations under the random probing assumption: Each element x stored in the hash table comes with a random sequence x0 , x1 , x2 , . . . where each of the xi is independently and uniformly distributed in {1, . . . , m}.4 We begin with a discussion of the two basic paradigms: hashing with chaining and open addressing. Both these paradigms attempt to store the key x at array position A[x0 ]. The diﬀerence between these two algorithms is their collision resolution strategy, i.e., what the algorithms do when a user inserts the key value x but array position A[x0 ] already contains some other key.

4 A variant of the random probing assumption, referred to as the uniform hashing assumption, assumes that x0 , . . . , xm−1 is a random permutation of 0, . . . , m − 1.

© 2005 by Chapman & Hall/CRC

Hash Tables

9.3.1

9-9

Hashing with Chaining

In hashing with chaining, a collision is resolved by allowing more than one element to live at each position in the table. Each entry in the array A is a pointer to the head of a linked list. To insert the value x, we simply append it to the list A[x0 ]. To search for the element x, we perform a linear search in the list A[x0 ]. To delete the element x, we search for x in the list A[x0 ] and splice it out. It is clear that insertions take O(1) time, even in the worst case. For searching and deletion, the running time is proportional to a constant plus the length of the list stored at A[x0 ]. Notice that each of the at most n elements not equal to x is stored in A[x0 ] with probability 1/m, so the expected length of A[x0 ] is either α = n/m (if x is not contained in the table) or 1 + (n − 1)/m (if x is contained in the table). Thus, the expected cost of searching for or deleting an element is O(1 + α). The above analysis shows us that hashing with chaining supports the three set ADT operations in O(1) expected time per operation, as long as the occupancy, α, is a constant. It is worth noting that this does not require that the value of α be less than 1. If we would like more detailed information about the cost of searching, we might also ask about the worst-case search time deﬁned as W = max{length of the list stored at A[i] : 0 ≤ i ≤ m − 1} . It is very easy to prove something quite strong about W using only the fact that the length of each list A[i] is a binomial(n, 1/m) random variable. Using Chernoﬀ’s bounds on the tail of the binomial distribution [13], this immediately implies that Pr{length of A[i] ≥ αc ln n} ≤ n−Ω(c) . Combining this with Boole’s inequality (Pr{A or B} ≤ Pr{A} + Pr{B}) we obtain Pr{W ≥ αc ln n} ≤ n × n−Ω(c) = n−Ω(c) . Thus, with very high probability, the worst-case search time is logarithmic in n. This also implies that E[W ] = O(log n). The distribution of W has been carefully studied and it is known that, with high probability, i.e., with probability 1 − o(1), W = (1 + o(1)) ln n/ ln ln n [33, 38].5 Gonnet has proven a more accurate result that W = Γ−1 (n) − 3/2 + o(1) with high probability. Devroye [18] shows that similar results hold even when the distribution of x0 is not uniform.

9.3.2

Hashing with Open Addressing

Hashing with open addressing diﬀers from hashing with chaining in that each table position A[i] is allowed to store only one value. When a collision occurs at table position i, one of the two elements involved in the collision must move on to the next element in its probe sequence. In order to implement this eﬃciently and correctly we require a method of marking elements as deleted. This method could be an auxiliary array that contains one bit for each element of A, but usually the same result can be achieved by using a special key value del that does not correspond to any valid key.

5 Here, and throughout this chapter, if an asymptotic notation does not contain a variable then the variable that tends to inﬁnity is implicitly n. Thus, for example, o(1) is the set of non-negative functions of n that tend to 0 as n → ∞.

© 2005 by Chapman & Hall/CRC

9-10

Handbook of Data Structures and Applications

To search for an element x in the hash table we look for x at positions A[x0 ], A[x1 ], A[x2 ], and so on until we either (1) ﬁnd x, in which case we are done or (2) ﬁnd an empty table position A[xi ] that is not marked as deleted, in which case we can be sure that x is not stored in the table (otherwise it would be stored at position xi ). To delete an element x from the hash table we ﬁrst search for x. If we ﬁnd x at table location A[xi ] we then simply mark A[xi ] as deleted. To insert a value x into the hash table we examine table positions A[x0 ], A[x1 ], A[x2 ], and so on until we ﬁnd a table position A[xi ] that is either empty or marked as deleted and we store the value x in A[xi ]. Consider the cost of inserting an element x using this method. Let ix denote the smallest value i such that xix is either empty or marked as deleted when we insert x. Thus, the cost of inserting x is a constant plus ix . The probability that the table position x0 is occupied is at most α so, with probability at least 1 − α, ix = 0. Using the same reasoning, the probability that we store x at position xi is at most Pr{ix = i} ≤ αi (1 − α)

(9.3)

since the table locations x0 , . . . , xi−1 must be occupied, the table location xi must not be occupied and the xi are independent. Thus, the expected number of steps taken by the insertion algorithm is ∞ i=1

i Pr{ix = i} = (1 − α)

∞

iαi−1 = 1/(1 − α)

i=1

for any constant 0 < α < 1. The cost of searching for x and deleting x are both proportional to the cost of inserting x, so the expected cost of each of these operations is O(1/(1 − α)).6 We should compare this with the cost of hashing with chaining. In hashing with chaining,the occupancy α has very little eﬀect on the cost of operations. Indeed, any constant α, even greater than 1 results in O(1) time per operation. In contrast, open addressing is very dependent on the value of α. If we take α > 1 then the expected cost of insertion using open addressing is inﬁnite since the insertion algorithm never ﬁnds an empty table position. Of course, the advantage of hashing with chaining is that it does not require lists at each of the A[i]. Therefore, the overhead of list pointers is saved and this extra space can be used instead to maintain the invariant that the occupancy α is a constant strictly less than 1. Next we consider the worst case search time of hashing with open addressing. That is, we study the value W = max{ix : x is stored in the table at location ix }. Using (9.3) and Boole’s inequality it follows almost immediately that Pr{W > c log n} ≤ n−Ω(c) . Thus, with very high probability, W , the worst case search time, is O(log n). Tighter bounds on W are known when the probe sequences x0 , . . . , xm−1 are random permutations of 0, . . . , m − 1. In this case, Gonnet[29] shows that E[W ] = log1/α n − log1/α (log1/α n) + O(1).

6 Note

that the expected cost of searching for or deleting an element x is proportional to the value of α at the time x was inserted. If many deletions have taken place, this may be quite diﬀerent than the current value of α.

© 2005 by Chapman & Hall/CRC

Hash Tables

9-11

Open addressing under the random probing assumption has many nice theoretical properties and is easy to analyze. Unfortunately, it is often criticized as being an unrealistic model because it requires a long random sequences x0 , x1 , x2 , . . . for each element x that is to be stored or searched for. Several variants of open addressing discussed in the next few sections try to overcome this problem by using only a few random values.

9.3.3

Linear Probing

Linear probing is a variant of open addressing that requires less randomness. To obtain the probe sequence x0 , x1 , x2 , . . . we start with a random element x0 ∈ {0, . . . , m − 1}. The element xi , i > 0 is given by xi = (i + x0 ) mod m. That is, one ﬁrst tries to ﬁnd x at location x0 and if that fails then one looks at (x0 + 1) mod m, (x0 + 2) mod m and so on. The performance of linear probing is discussed by Knuth [37] who shows that the expected number of probes performed during an unsuccessful search is at most (1 + 1/(1 − α)2 )/2 and the expected number of probes performed during a successful search is at most (1 + 1/(1 − α))/2 . This is not quite as good as for standard hashing with open addressing, especially in the unsuccessful case. Linear probing suﬀers from the problem of primary clustering. If j consecutive array entries are occupied then a newly inserted element will have probability j/m of hashing to one of these entries. This results in j + 1 consecutive array entries being occupied and increases the probability (to (j + 1)/m) of another newly inserted element landing in this cluster. Thus, large clusters of consecutive elements have a tendency to grow larger.

9.3.4

Quadratic Probing

Quadratic probing is similar to linear probing; an element x determines its entire probe sequence based on a single random choice, x0 . Quadratic probing uses the probe sequence x0 , (x0 + k1 + k2 ) mod m, (x0 + 2k1 + 22 k2 ) mod m, . . .. In general, the ith element in the probe sequence is xi = (x0 + ik1 + i2 k2 ) mod m. Thus, the ﬁnal location of an element depends quadratically on how many steps were required to insert it. This method seems to work much better in practice than linear probing, but requires a careful choice of m, k1 and k2 so that the probe sequence contains every element of {0, . . . , m − 1}. The improved performance of quadratic probing is due to the fact that if there are two elements x and y such that xi = yj then it is not necessarily true (as it is with linear probing) that xi+1 = yj+1 . However, if x0 = y0 then x and y will have exactly the same probe sequence. This lesser phenomenon is called secondary clustering. Note that this secondary clustering phenomenon implies that neither linear nor quadratic probing can hope to perform any better than hashing with chaining. This is because all the elements that have the same initial hash x0 are contained in an implicit chain. In the case of linear probing, this chain is deﬁned by the sequence x0 , x0 + 1, x0 + 2, . . . while for quadratic probing it is deﬁned by the sequence x0 , x0 + k1 + k2 , x0 + 2k1 + 4k2 , . . .

9.3.5

Double Hashing

Double hashing is another method of open addressing that uses two hash values x0 and x1 . Here x0 is in the set {0, . . . , m − 1} and x1 is in the subset of {1, . . . , m − 1} that is

© 2005 by Chapman & Hall/CRC

9-12

Handbook of Data Structures and Applications

relatively prime to m. With double hashing, the probe sequence for element x becomes x0 , (x0 + x1 ) mod m, (x0 + 2x1 ) mod m, . . .. In general, xi = (x0 + ix1 ) mod m, for i > 0. The expected number of probes required by double hashing seems diﬃcult to determine exactly. Guibas has proven that, asymptotically, and for occupancy α ≤ .31, the performance of double hashing is asymptotically equivalent to that of uniform hashing. Empirically, the performance of double hashing matches that of open addressing with random probing regardless of the occupancy α [37].

9.3.6

Brent’s Method

Brent’s method [5] is a heuristic that attempts to minimize the average time for a successful search in a hash table with open addressing. Although originally described in the context of double hashing (Section 9.3.5) Brent’s method applies to any open addressing scheme. The age of an element x stored in an open addressing hash table is the minimum value i such that x is stored at A[xi ]. In other words, the age is one less than the number of locations we will probe when searching for x. Brent’s method attempts to minimize the total age of all elements in the hash table. To insert the element x we proceed as follows: We ﬁnd the smallest value i such that A[xi ] is empty; this is where standard open-addressing would insert x. Consider the element y stored at location A[xi−2 ]. This element is stored there because yj = xi−2 , for some j ≥ 0. We check if the array location A[yj+1 ] is empty and, if so, we move y to location A[yj+1 ] and store x at location A[xi−2 ]. Note that, compared to standard open addressing, this decreases the total age by 1. In general, Brent’s method checks, for each 2 ≤ k ≤ i the array entry A[xi−k ] to see if the element y stored there can be moved to any of A[yj+1 ], A[yj+2 ], . . . , A[yj+k−1 ] to make room for x. If so, this represents a decrease in the total age of all elements in the table and is performed. Although Brent’s method seems to work well in practice, it is diﬃcult to analyze theoretically. Some theoretical analysis of Brent’s method applied to double hashing is given by Gonnet and Munro [31]. Lyon [44], Munro and Celis [49] and Poblete [52] describe some variants of Brent’s method.

9.3.7

Multiple-Choice Hashing

It is worth stepping back at this point and revisiting the comparison between hash tables and binary search trees. For balanced binary search trees, the average cost of searching for an element is O(log n). Indeed, it easy to see that for at least n/2 of the elements, the cost of searching for those elements is Ω(log n). In comparison, for both the random probing schemes discussed so far, the expected cost of search for an element is O(1). However, there are a handful of elements whose search cost is Θ(log n/ log log n) or Θ(log n) depending on whether hashing with chaining or open addressing is used, respectively. Thus there is an inversion: Most operations on a binary search tree cost Θ(log n) but a few elements (close to the root) can be accessed in O(1) time. Most operations on a hash table take O(1) time but a few elements (in long chains or with long probe sequences) require Θ(log n/ log log n) or Θ(log n) time to access. In the next few sections we consider variations on hashing with chaining and open addressing that attempt to reduce the worst-case search time W . Multiple-choice hashing is hashing with chaining in which, during insertion, the element x has the choice of d ≥ 2 diﬀerent lists in which it can be stored. In particular, when we insert x we look at the lengths of the lists pointed to by A[x0 ], . . . , A[xd−1 ] and append x to A[xi ], 0 ≤ i < d such that the length of the list pointed to by A[xi ] is minimum. When searching for x, we search for x in each of the lists A[x0 ], . . . , A[xd−1 ] in parallel. That is, we

© 2005 by Chapman & Hall/CRC

Hash Tables

9-13

look at the ﬁrst elements of each list, then the second elements of each list, and so on until we ﬁnd x. As before, to delete x we ﬁrst search for it and then delete it from whichever list we ﬁnd it in. It is easy to see that the expected cost of searching for an element x is O(d) since the expected length of each the d lists is O(1). More interestingly, the worst case search time is bounded by O(dW ) where W is the length of the longest list. Azar et al. [3] show that E[W ] =

ln ln n + O(1) . ln d

(9.4)

Thus, the expected worst case search time for multiple-choice hashing is O(log log n) for any constant d ≥ 2.

9.3.8

Asymmetric Hashing

Asymmetric hashing is a variant of multiple-choice hashing in which the hash table is split into d blocks, each of size n/d. (Assume, for simplicity, that n is a multiple of d.) The probe value xi , 0 ≤ i < d is drawn uniformly from {in/d, . . . , (i + 1)n/d − 1}. As with multiple-choice hashing, to insert x the algorithm examines the lengths of the lists A[x0 ], A[x1 ], . . . , A[xd−1 ] and appends x to the shortest of these lists. In the case of ties, it appends x to the list with smallest index. Searching and deletion are done exactly as in multiple-choice hashing. V¨ocking [64] shows that, with asymmetric hashing the expected length of the longest list is ln ln n E[W ] ≤ + O(1) . d ln φd √ The function φd is a generalization of the golden ratio, so that φ2 = (1 + 5)/2. Note that this improves signiﬁcantly on standard multiple-choice hashing (9.4) for larger values of d.

9.3.9

LCFS Hashing

LCFS hashing is a form of open addressing that changes the collision resolution strategy.7 Reviewing the algorithm for hashing with open addressing reveals that when two elements collide, priority is given to the ﬁrst element inserted into the hash table and subsequent elements must move on. Thus, hashing with open addressing could also be referred to as FCFS (ﬁrst-come ﬁrst-served) hashing. With LCFS (last-come ﬁrst-served) hashing, collision resolution is done in exactly the opposite way. When we insert an element x, we always place it at location x0 . If position x0 is already occupied by some element y because yj = x0 then we place y at location yj+1 , possibly displacing some element z, and so on. Poblete and Munro [53] show that, after inserting n elements into an initially empty table, the expected worst case search time is bounded above by 1 ln ln(1/(1 − α)) −1 +O E[W ] ≤ 1 + Γ (αn) 1 + , ln Γ−1 (αn) ln2 Γ−1 (αn)

7 Amble and Knuth [1] were the ﬁrst to suggest that, with open addressing, any collision resolution strategy could be used.

© 2005 by Chapman & Hall/CRC

9-14

Handbook of Data Structures and Applications

where Γ is the gamma function and Γ−1 (αn) =

ln n ln ln n

ln ln ln n 1 1+ +O . ln ln n ln ln n

Historically, LCFS hashing is the ﬁrst version of open addressing that was shown to have an expected worst-case search time that is o(log n).

9.3.10

Robin-Hood Hashing

Robin-Hood hashing [9, 10, 61] is a form of open addressing that attempts to equalize the search times of elements by using a fairer collision resolution strategy. During insertion, if we are trying to place element x at position xi and there is already an element y stored at position yj = xi then the “younger” of the two elements must move on. More precisely, if i ≤ j then we will try to insert x at position xi+1 , xi+2 and so on. Otherwise, we will store x at position xi and try to to insert y at positions yj+1 , yj+2 and so on. Devroye et al. [20] show that, after performing n insertions on an initially empty table of size m = αn using the Robin-Hood insertion algorithm, the worst case search time has expected value E[W ] = Θ(log log n) and this bound is tight. Thus, Robin-Hood hashing is a form of open addressing that has doubly-logarithmic worst-case search time. This makes it competitive with the multiplechoice hashing method of Section 9.3.7.

9.3.11

Cuckoo Hashing

Cuckoo hashing [50] is a form of multiple choice hashing in which each element x lives in one of two tables A or B, each of size m = n/α. The element x will either be stored at location A[xA ] or B[xB ]. There are no other options. This makes searching for x an O(1) time operation since we need only check two array locations. The insertion algorithm for cuckoo hashing proceeds as follows:8 Store x at location A[xA ]. If A[xA ] was previously occupied by some element y then store y at location B[yB ]. If B[yB ] was previously occupied by some element z then store z at location A[zA ], and so on. This process ends when we place an element into a previously empty table slot or when it has gone on for more than c log n steps. In the former case, the insertion of x completes successfully. In the latter case the insertion is considered a failure, and the entire hash table is reconstructed from scratch using a new probe sequence for each element in the table. That is, if this reconstruction process has happened i times then the two hash values we use for an element x are xA = x2i and xB = x2i+1 . Pagh and Rodler [50] (see also Devroye and Morin [19]) show that, during the insertion of n elements, the probability of requiring a reconstruction is O(1/n). This, combined with the fact that the expected insertion time is O(1) shows that the expected cost of n insertions in a Cuckoo hashing table is O(n). Thus, Cuckoo hashing oﬀers a somewhat simpler alternative to the dynamic perfect hashing algorithms of Section 9.2.5.

8 The algorithm takes its name from the large but lazy cuckoo bird which, rather than building its own nest, steals the nest of another bird forcing the other bird to move on.

© 2005 by Chapman & Hall/CRC

Hash Tables

9.4

9-15

Historical Notes

In this section we present some of the history of hash tables. The idea of hashing seems to have been discovered simultaneously by two groups of researchers. Knuth [37] cites an internal IBM memorandum in January 1953 by H. P. Luhn that suggested the use of hashing with chaining. Building on Luhn’s work, A. D. Linh suggested a method of open addressing that assigns the probe sequence x0 , x0 /10 , x0 /100 , x0 /1000 , . . . to the element x. At approximately the same time, another group of researchers at IBM: G. M. Amdahl, E. M. Boehme, N. Rochester and A. L. Samuel implemented hashing in an assembly program for the IBM 701 computer. Amdahl is credited with the idea of open addressing with linear probing. The ﬁrst published work on hash tables was by A. I. Dumey [24], who described hashing with chaining and discussed the idea of using remainder modulo a prime as a hash function. Ershov [25], working in Russia and independently of Amdahl, described open addressing with linear probing. Peterson [51] wrote the ﬁrst major article discussing the problem of searching in large ﬁles and coined the term “open addressing.” Buchholz [7] also gave a survey of the searching problem with a very good discussion of hashing techniques at the time. Theoretical analyses of linear probing were ﬁrst presented by Konheim and Weiss [39] and Podderjugin. Another, very inﬂuential, survey of hashing was given by Morris [47]. Morris’ survey is the ﬁrst published use of the word “hashing” although it was already in common use by practitioners at that time.

9.5

Other Developments

The study of hash tables has a long history and many researchers have proposed methods of implementing hash tables. Because of this, the current chapter is necessarily incomplete. (At the time of writing, the hash.bib bibliography on hashing contains over 800 entries.) We have summarized only a handful of the major results on hash tables in internal memory. In this section we provide a few references to the literature for some of the other results. For more information on hashing, Knuth [37], Vitter and Flajolet [63], Vitter and Chen [62], and Gonnet and Baeza-Yates [30] are useful references. Brent’s method (Section 9.3.6) is a collision resolution strategy for open addressing that reduces the expected search time for a successful search in a hash table with open addressing. Several other methods exist that either reduce the expected or worst-case search time. These include binary tree hashing [31, 45], optimal hashing [31, 54, 55], Robin-Hood hashing (Section 9.3.10), and min-max hashing [9, 29]. One interesting method, due to Celis [9], applies to any open addressing scheme. The idea is to study the distribution of the ages of elements in the hash table, i.e., the distribution give by Di = Pr{x is stored at position xi } and start searching for x at the locations at which we are most likely to ﬁnd it, rather than searching the table positions x0 , x1 , x2 . . . in order. Perfect hash functions seem to have been ﬁrst studied by Sprugnoli [58] who gave some heuristic number theoretic constructions of minimal perfect hash functions for small data sets. Sprugnoli is responsible for the terms “perfect hash function” and “minimal perfect hash function.” A number of other researchers have presented algorithms for discovering minimal and near-minimal perfect hash functions. Examples include Anderson and Anderson [2], Cichelli [14, 15], Chang [11, 12], Gori and Soda [32], and Sager [56]. Berman et al. [4]

© 2005 by Chapman & Hall/CRC

9-16

Handbook of Data Structures and Applications

and K¨ orner and Marton [40] discuss the theoretical limitations of perfect hash functions. A comprehensive, and recent, survey of perfect hashing and minimal perfect hashing is given by Czech et al. [17]. Tarjan and Yao [60] describe a set ADT implementation that gives O(log u/ log n) worstcase access time. It is obtained by combining a trie (Chapter 28) of degree n with a compression scheme for arrays of size n2 that contain only n non-zero elements. (The trie has O(n) nodes each of which has n pointers to children, but there are only a total of O(n) children.) Although their result is superseded by the results of Fredman et al. [28] discussed in Section 9.2.4, they are the ﬁrst theoretical results on worst-case search time for hash tables. Dynamic perfect hashing (Section 9.2.5) and cuckoo hashing (Section 9.3.11) are methods of achieving O(1) worst case search time in a dynamic setting. Several other methods have been proposed [6, 21, 22]. Yao [65] studies the membership problem. Given a set S ⊆ U , devise a data structure that can determine for any x ∈ U whether x is contained in S. Yao shows how, under various conditions, this problem can be solved using a very small number of memory accesses per query. However, Yao’s algorithms sometimes derive the fact that an element x is in S without actually ﬁnding x. Thus, they don’t solve the set ADT problem discussed at the beginning of this chapter since they can not recover a pointer to x. The “power of two random choices,” as used in multiple-choice hashing, (Section 9.3.7) has many applications in computer science. Karp, Luby and Meyer auf der Heide [34, 35] were the ﬁrst to use this paradigm for simulating PRAM computers on computers with fewer processors. The book chapter by Mitzenmacher et al. [46] surveys results and applications of this technique. A number of table implementations have been proposed that are suitable for managing hash tables in external memory. Here, the goal is to reduce the number of disk blocks that must be accessed during an operation, where a disk block can typically hold a large number of elements. These schemes include linear hashing [43], dynamic hashing [41], virtual hashing [42], extendible hashing [26], cascade hashing [36], and spiral storage [48]. In terms of hashing, the main diﬀerence between internal memory and external memory is that, in internal memory, an array is allocated at a speciﬁc size and this can not be changed later. In contrast, an external memory ﬁle may be appended to or be truncated to increase or decrease its size, respectively. Thus, hash table implementations for external memory can avoid the periodic global rebuilding operations used in internal memory hash table implementations.

Acknowledgment The author is supported by a grant from the Natural Sciences and Engineering Research Council of Canada (NSERC).

© 2005 by Chapman & Hall/CRC

Hash Tables

References [1] O. Amble and D. E. Knuth. Ordered hash tables. The Computer Journal, 17(2):135– 142, 1974. [2] M. R. Anderson and M. G. Anderson. Comments on perfect hashing functions: A single probe retrieving method for static sets. Communications of the ACM, 22(2):104, 1979. [3] Y. Azar, A. Z. Broder, A. R. Karlin, and E. Upfal. Balanced allocations. SIAM Journal on Computing, 29(1):180–200, 1999. [4] F. Berman, M. E. Bock, E. Dittert, M. J. O’Donnell, and D. Plank. Collections of functions for perfect hashing. SIAM Journal on Computing, 15(2):604–618, 1986. [5] R. P. Brent. Reducing the storage time of scatter storage techniques. Communications of the ACM, 16(2):105–109, 1973. [6] A. Brodnik and J. I. Munro. Membership in constant time and almost minimum space. SIAM Journal on Computing, 28:1627–1640, 1999. [7] W. Buchholz. File organization and addressing. IBM Systems Journal, 2(1):86–111, 1963. [8] J. L. Carter and M. N. Wegman. Universal classes of hash functions. Journal of Computer and System Sciences, 18(2):143–154, 1979. [9] P. Celis. Robin Hood hashing. Technical Report CS-86-14, Computer Science Department, University of Waterloo, 1986. [10] P. Celis, P.-˚ A. Larson, and J. I. Munro. Robin Hood hashing. In Proceedings of the 26th Annual IEEE Symposium on Foundations of Computer Science (FOCS’85), pages 281–288. IEEE Press, 1985. [11] C. C. Chang. An ordered minimal perfect hashing scheme based upon Euler’s theorem. Information Sciences, 32(3):165–172, 1984. [12] C. C. Chang. The study of an ordered minimal perfect hashing scheme. Communications of the ACM, 27(4):384–387, 1984. [13] H. Chernoﬀ. A measure of the asymptotic eﬃcient of tests of a hypothesis based on the sum of observations. Annals of Mathematical Statistics, 23:493–507, 1952. [14] R. J. Cichelli. Minimal perfect hash functions made simple. Communications of the ACM, 23(1):17–19, 1980. [15] R. J. Cichelli. On Cichelli’s minimal perfect hash functions method. Communications of the ACM, 23(12):728–729, 1980. [16] T. H. Cormen, C. E. Leiserson, R. L. Rivest, and C. Stein. Introduction to Algorithms. MIT Press, Cambridge, Massachussetts, 2nd edition, 2001. [17] Z. J. Czech, G. Havas, and B. S. Majewski. Perfect hashing. Theoretical Computer Science, 182(1-2):1–143, 1997. [18] L. Devroye. The expected length of the longest probe sequence when the distribution is not uniform. Journal of Algorithms, 6:1–9, 1985. [19] L. Devroye and P. Morin. Cuckoo hashing: Further analysis. Information Processing Letters, 86(4):215–219, 2002. [20] L. Devroye, P. Morin, and A. Viola. On worst case Robin-Hood hashing. SIAM Journal on Computing. To appear. [21] M. Dietzfelbinger and F. Meyer auf der Heide. A new universal class of hash functions and dynamic hashing in real time. In Proceedings of the 17th International Colloquium on Automata, Languages, and Programming (ICALP’90), pages 6–19, 1990. [22] M. Dietzfelbinger, J. Gil, Y. Matias, and N. Pippenger. Polynomial hash functions are reliable. In Proceedings of the 19th International Colloquium on Automata, Languages, and Programming (ICALP’92), pages 235–246, 1992.

© 2005 by Chapman & Hall/CRC

9-17

9-18

Handbook of Data Structures and Applications

[23] M. Dietzfelbinger, A. R. Karlin, K. Mehlhorn, F. Meyer auf der Heide, H. Rohnert, and R. E. Tarjan. Dynamic perfect hashing: Upper and lower bounds. SIAM Journal on Computing, 23(4):738–761, 1994. [24] A. I. Dumey. Indexing for rapid random access memory systems. Computers and Automation, 5(12):6–9, 1956. [25] A. P. Ershov. On programming of arithmetic operations. Doklady Akademii Nauk SSSR, 118(3):427–430, 1958. [26] R. Fagin, J. Nievergelt, N. Pippenger, and H. R. Strong. Extendible hashing — a fast access method for dynamic ﬁles. ACM Transactions on Database Systems, 4(3):315– 344, 1979. [27] W. Feller. An Introduction to Probability Theory and its Applications. John Wiley & Sons, New York, 1968. [28] M. L. Fredman, J. Koml´ os, and E. Szemer´edi. Storing a sparse table with O(1) worst case access time. Journal of the ACM, 31(3):538–544, 1984. [29] G. H. Gonnet. Expected length of the longest probe sequence in hash code searching. Journal of the ACM, pages 289–304, 1981. [30] G. H. Gonnet and R. Baeza-Yates. Handbook of Algorithms and Data Structures: in Pascal and C. Addison-Wesley, Reading, MA, USA, 2nd edition, 1991. [31] G. H. Gonnet and J. I. Munro. Eﬃcient ordering of hash tables. SIAM Journal on Computing, 8(3):463–478, 1979. [32] M. Gori and G. Soda. An algebraic approach to Cichelli’s perfect hashing. Bit, 29(1):2– 13, 1989. [33] N. L. Johnson and S. Kotz. Urn Models and Their Applications. John Wiley & Sons, New York, 1977. [34] R. Karp, M. Luby, and F. Meyer auf der Heide. Eﬃcient PRAM simulation on a distributed memory machine. Technical Report TR-93-040, International Computer Science Institute, Berkeley, CA, USA, 1993. [35] R. M. Karp, M. Luby, and F. Meyer auf der Heide. Eﬃcient PRAM simulation on a distributed memory machine. In Proceedings of the 24th ACM Symposium on the Theory of Computing (STOC’92), pages 318–326. ACM Press, 1992. [36] P. Kjellberg and T. U. Zahle. Cascade hashing. In Proceedings of the 10th International Conference on Very Large Data Bases (VLDB’80), pages 481–492. Morgan Kaufmann, 1984. [37] D. E. Knuth. The Art of Computer Programming, volume 3. Addison-Wesley, 2nd edition, 1997. [38] V. F. Kolchin, B. A. Sevastyanov, and V. P. Chistyakov. Random Allocations. John Wiley & Sons, New York, 1978. [39] A. G. Konheim and B. Weiss. An occupancy discipline and its applications. SIAM Journal of Applied Mathematics, 14:1266–1274, 1966. [40] J. K¨ orner and K. Marton. New bounds for perfect hashing via information theory. European Journal of Combinatorics, 9(6):523–530, 1988. [41] P.-˚ A. Larson. Dynamic hashing. Bit, 18(2):184–201, 1978. [42] W. Litwin. Virtual hashing: A dynamically changing hashing. In Proceedings of the 4th International Conference on Very Large Data Bases (VLDB’80), pages 517–523. IEEE Computer Society, 1978. [43] W. Litwin. Linear hashing: A new tool for ﬁle and table addressing. In Proceedings of the 6th International Conference on Very Large Data Bases (VLDB’80), pages 212–223. IEEE Computer Society, 1980. [44] G. E. Lyon. Packed scatter tables. Communications of the ACM, 21(10):857–865, 1978.

© 2005 by Chapman & Hall/CRC

Hash Tables [45] E. G. Mallach. Scatter storage techniques: A unifying viewpoint and a method for reducing retrieval times. The Computer Journal, 20(2):137–140, 1977. [46] M. Mitzenmacher, A. W. Richa, and R. Sitaraman. The power of two random choices: A survey of techniques and results. In P. Pardalos, S. Rajasekaran, and J. Rolim, editors, Handbook of Randomized Computing, volume 1, chapter 9. Kluwer, 2001. [47] R. Morris. Scatter storage techniques. Communications of the ACM, 11(1):38–44, 1968. [48] J. K. Mullin. Spiral storage: Eﬃcient dynamic hashing with constant performance. The Computer Journal, 28(3):330–334, 1985. [49] J. I. Munro and P. Celis. Techniques for collision resolution in hash tables with open addressing. In Proceedings of 1986 Fall Joint Computer Conference, pages 601–610. ACM Press, 1999. [50] R. Pagh and F. F. Rodler. Cuckoo hashing. In Proceedings of the 9th Annual European Symposium on Algorithms (ESA 2001), volume 2161 of Lecture Notes in Computer Science, pages 121–133. Springer-Verlag, 2001. [51] W. W. Peterson. Addressing for random-access storage. IBM Journal of Research and Development, 1(2):130–146, 1957. [52] P. V. Poblete. Studies on hash coding with open addressing. M. Math Essay, University of Waterloo, 1977. [53] P. V. Poblete and J. Ian Munro. Last-come-ﬁrst-served hashing. Journal of Algorithms, 10:228–248, 1989. [54] G. Poonan. Optimal placement of entries in hash tables. In ACM Computer Science Conference (Abstract Only), volume 25, 1976. (Also DEC Internal Tech. Rept. LRD1, Digital Equipment Corp. Maynard Mass). [55] R. L. Rivest. Optimal arrangement of keys in a hash table. Journal of the ACM, 25(2):200–209, 1978. [56] T. J. Sager. A polynomial time generator for minimal perfect hash functions. Communications of the ACM, 28(5):523–532, 1985. [57] V. T. S´ os. On the theory of diophantine approximations. i. Acta Mathematica Budapest, 8:461–471, 1957. [58] R. Sprugnoli. Perfect hashing functions: A single probe retrieving method for static sets. Communications of the ACM, 20(11):841–850, 1977. ´ [59] S. Swierczkowski. On successive settings of an arc on the circumference of a circle. Fundamenta Mathematica, 46:187–189, 1958. [60] R. E. Tarjan and A. C.-C. Yao. Storing a sparse table. Communications of the ACM, 22(11):606–611, 1979. [61] A. Viola and P. V. Poblete. Analysis of linear probing hashing with buckets. Algorithmica, 21:37–71, 1998. [62] J. S. Vitter and W.-C. Chen. The Design and Analysis of Coalesced Hashing. Oxford University Press, Oxford, UK, 1987. [63] J. S. Vitter and P. Flajolet. Analysis of algorithms and data structures. In J. van Leeuwen, editor, Handbook of Theoretical Computer Science, volume A: Algorithms and Complexity, chapter 9, pages 431–524. North Holland, 1990. [64] B. V¨ ocking. How asymmetry helps load balancing. In Proceedings of the 40th Annual IEEE Symposium on Foundations of Computer Science (FOCS’99), pages 131–140. IEEE Press, 1999. [65] A. C.-C. Yao. Should tables be sorted? Journal of the ACM, 28(3):615–628, 1981.

© 2005 by Chapman & Hall/CRC

9-19

10 Balanced Binary Search Trees 10.1 10.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic Deﬁnitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10-1 10-2

Trees • Binary Trees as Dictionaries • Implementation of Binary Search Trees

10.3

Generic Discussion of Balancing . . . . . . . . . . . . . . . . . Balance Deﬁnitions • Rebalancing Algorithms Complexity Results

10.4

10-4

•

Classic Balancing Schemes . . . . . . . . . . . . . . . . . . . . . . . .

10-7

AVL-Trees • Weight-Balanced Trees • Balanced Binary Trees Based on Multi-Way Trees.

Arne Andersson

10.5 10.6

Implicit Representation of Balance Information General Balanced Trees • Application to Multi-Dimensional Search Trees

Uppsala University

Rolf Fagerberg University of Southern Denmark

Kim S. Larsen University of Southern Denmark

10.1

Rebalancing a Tree to Perfect Balance . . . . . . . . . . 10-11 Schemes with no Balance Information . . . . . . . . . . 10-12

10.7 10.8

•

Low Height Schemes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-17 Relaxed Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20 Red-Black Trees Other Results

•

AVL-Trees

•

Multi-Way Trees

•

Introduction

Balanced binary search trees are among the most important data structures in Computer Science. This is because they are eﬃcient, versatile, and extensible in many ways. They are used as a black-box in numerous algorithms and even other data structures. The main virtue of balanced binary search trees is their ability to maintain a dynamic set in sorted order, while supporting a large range of operations in time logarithmic in the size of the set. The operations include search, insertion, deletion, predecessor/successor search, range search, rank search, batch update, split, meld, and merge. These operations are described in more detail in Section 10.2 below. Data structures supporting the operations search, insertion, deletion, and predecessor (and/or successor) search are often denoted ordered dictionaries. In the comparison based model, the logarithmic performance of balanced binary search trees is optimal for ordered dictionaries, whereas in the RAM model, faster operations are possible [13, 18]. If one considers unordered dictionaries, i.e., only the operations search, insertion, and deletion, expected constant time is possible by hashing.

10-1

© 2005 by Chapman & Hall/CRC

10-2

10.2 10.2.1

Handbook of Data Structures and Applications

Basic Deﬁnitions Trees

There are many ways to deﬁne trees. In this section, we deﬁne a tree as a hierarchical organization of a collection of nodes. For alternatives to our exposition, see the chapter on trees. A tree can be empty. If it is not empty, it consists of one node, which is referred to as the root of the tree, and a collection of trees, referred to as subtrees. Thus, a tree consists of many smaller trees, each with their own root. We use r to denote the single node which is the root of the entire tree. We only consider ﬁnite trees, i.e., every collection of subtrees is ﬁnite, and there are no inﬁnite chains of nonempty subtrees. Furthermore, we only consider ordered trees, meaning that the collection of subtrees of a node is an ordered sequence rather than just a set. If every nonempty tree has exactly two subtrees, then the tree is called binary. In this case, we refer to the two subtrees as the left and right subtrees. We use u, v, w, etc. to denote nodes and T to denote trees, applying apostrophes, index, etc. to increase the name space. For a node u, we use u.l and u.r to denote the left and right subtree, respectively, of the tree rooted by u. However, when no confusion can occur, we do not necessarily distinguish between nodes and subtrees. Thus, by the subtree v, we mean the subtree rooted at the node v and by T we mean the entire tree or the root of the tree. We use the standard genealogical terminology to denote nodes in the vicinity of a designated node. Thus, if u is the root of a tree and v is the root of a subtree of u, then v is referred to as a child of u. By analogy, this deﬁnes grandchildren, parent, grandparent, and sibling. The set of nodes belonging to a nonempty tree is its root, along with all the nodes belonging to its subtrees. For an empty tree, this set is of course empty. If a node v belongs to the subtree of u, then v is a descendant of u, and u is an ancestor of v. An ancestor or descendant v of a node u is proper if u = v. Quite often, it is convenient to refer to empty subtrees as real nodes, in which case they are referred to as external nodes (or leaves). The remaining nodes are then referred to as internal nodes. It is easy to prove by induction that the number of external nodes is always one larger than the number of internal nodes. The number of nodes belonging to a tree is referred to as its size (or its weight). In some applications, we deﬁne the size of the tree to be the number of internal nodes in the tree, but more often it is convenient to deﬁne the size of the tree to be the number of external nodes. We use n to denote the size of the tree rooted by r, and |u| to denote the size of the subtree rooted by u. A path in a tree is a sequence of nodes u1 , u2 , . . . , uk , k ≥ 1, such that for i ∈ {1, . . . , k−1}, ui+1 is a child of ui . Note that the length of such a path is k − 1. The depth of a node u in the tree T is the length of the path from the root of T to u, and the height of a tree T is the maximal depth of any external node.

10.2.2

Binary Trees as Dictionaries

When trees are used to implement the abstract data type dictionary, nodes have associated values. A dictionary basically organizes a set of keys, which must be elements drawn from a total ordering, and must usually supply at least the operations search, insertion, and deletion. There may be additional information associated with each key, but this does not

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-3

lead to any conceptual complications, so here we simply focus on the keys. When a tree is used as a dictionary, each node stores one key, and we impose the following ordering invariant (the in-order invariant): for each node u in the tree, every key in u.l is strictly smaller than u.k, and every key in u.r is strictly larger than u.k. A tree organized according to this invariant is referred to as a binary search tree. An important implication of this ordering invariant is that a sorted list of all the keys in the tree can be produced in linear time using an in-order traversal deﬁned recursively as follows. On an empty tree, do nothing. Otherwise, recurs on the left subtree, report the root key, and then recurs on the right subtree. Many diﬀerent operations can be supported by binary search tree implementations. Here, we discuss the most common. Using the ordering invariant, we can devise a searching procedure of asymptotic time complexity proportional to the height of the tree. Since searching turns out to be at the heart of most of the operations of interest to us, unless we stipulate otherwise, all the operations in the following inherit the same complexity. Simple Searching

To search for x in a tree rooted by u, we ﬁrst compare x to u.k. If they are equal, a positive response is given. Otherwise, if x is smaller than u.k, we search recursively in u.l, and if x is larger, we search in u.r. If we arrive at an empty tree, a negative response is given. In this description, we have used ternary comparisons, in that our decisions regarding how to proceed depend on whether the search key is less than, equal to, or greater than the root key. For implementation purposes, it is possible to use the more eﬃcient binary comparisons [12]. A characteristic feature of search trees is that when a searching fails, a nearest neighbor can be provided eﬃciently. Dictionaries supporting predecessor/successor queries are referred to as ordered. This is in contrast to hashing (described in a chapter of their own) which represents a class of unordered dictionaries. A predecessor search for x must return the largest key less than or equal to x. This operation as well as the similar successor search are simple generalizations of the search strategy outlined above. The case where x is found on the way is simple, so assume that x is not in the tree. Then the crucial observation is that if the last node encountered during the search is smaller than x, then this node is the predecessor. Otherwise, the predecessor key is the largest key in the left subtree of the last node on the search path containing a key smaller than x. A successor search is similar. Simple Updates

An insertion takes a tree T and a key x not belonging to T as arguments and adds a node containing x and two empty subtrees to T . The node replaces the empty subtree in T where the search for x terminates. A deletion takes a tree T and a key x belonging to T as arguments and removes the node u containing x from the tree. If u’s children are empty trees, u is simply replaced by an empty tree. If u has exactly one child which is an internal node, then this child is replacing u. Finally, if u has two internal nodes as children, u’s predecessor node v is used. First, the key in u is overwritten by the key of v, after which v is deleted. Note that because of the choice of v, the ordering invariant is not violated. Note also that v has at most one child which is an internal node, so one of the simpler replacing strategies described above can be used to remove v.

© 2005 by Chapman & Hall/CRC

10-4

Handbook of Data Structures and Applications More Searching Procedures

A range search takes a tree T and two key values k1 ≤ k2 as arguments and returns all keys x for which k1 ≤ x ≤ k2 . A range search can be viewed as an in-order traversal, where we do not recurs down the left subtree and do not report the root key if k1 should be in the right subtree; similarly, we do not recurs down the right subtree and do not report the root key if k2 should be in the left subtree. The complexity is proportional to the height of the tree plus the size of the output. A useful technique for providing more complex operations eﬃciently is to equip the nodes in the tree with additional information which can be exploited in more advanced searching, and which can also be maintained eﬃciently. A rank search takes a tree T and an integer d between one and n as arguments, and returns the dth smallest key in T . In order to provide this functionality eﬃciently, we store in each node the size of the subtree in which it is the root. Using this information during a search down the tree, we can at each node determine in which subtree the node must be located and we can appropriately adjust the rank that we search for recursively. If the only modiﬁcations made to the tree are small local changes, this extra information can be kept up-to-date eﬃciently, since it can always be recomputed from the information in the children. Operations Involving More Trees

The operation split takes a key value x and tree T as arguments and returns two trees; one containing all keys from T less than or equal to x and one with the remaining keys. The operations is destructive, meaning that the argument tree T will not be available after the operation. The operation meld takes two trees as arguments, where all keys in one tree are smaller than all keys in the other, and combines the trees into one containing all the keys. This operation is also destructive. Finally, merge combines the keys from two argument trees, with no restrictions on keys, into one. Also this operation is destructive.

10.2.3

Implementation of Binary Search Trees

In our discussion of time and space complexities, we assume that some standard implementation of trees are used. Thus, in analogy with the recursive deﬁnition, we assume that a tree is represented by information associated with its root, primarily the key, along with pointers (references) to its left and right subtrees, and that this information can be accessed in constant time. In some situations, we may assume that additional pointers are present, such as parentpointers, giving a reference from a node to its parent. We also sometimes use level-pointers. A level consists of all nodes of the same depth, and a level-pointer to the right from a node with key k points to the node at the same level with the smallest key larger than k. Similar for level-pointers to the left.

10.3

Generic Discussion of Balancing

As seen in Section 10.2, the worst case complexity of almost all operations on a binary search tree is proportional to its height, making the height its most important single characteristic. Since a binary tree of height h contains at most 2h − 1 nodes, a binary tree of n nodes has a height of at least log(n + 1). For static trees, this lower bound is achieved by a tree where all but one level is completely ﬁlled. Building such a tree can be done in linear time (assuming that the sorted order of the keys is known), as discussed in Section 10.5 below. In the dynamic case, however, insertions and deletions may produce a very unbalanced

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-5

tree—for instance, inserting elements in sorted order will produce a tree of height linear in the number of elements. The solution is to rearrange the tree after an insertion or deletion of an element, if the operation has made the tree unbalanced. For this, one needs a deﬁnition of balance and a rebalancing algorithm describing the rearrangement leading to balance after updates. The combined balance deﬁnition and rebalancing algorithm we denote a rebalancing scheme. In this section, we discuss rebalancing schemes at a generic level. The trivial rebalancing scheme consists of deﬁning a balanced tree as one having the optimal height log(n + 1), and letting the rebalancing algorithm be the rebuilding of the entire tree after each update. This costs linear time per update, which is exponentially larger than the search time of the tree. It is one of the basic results of Computer Science, ﬁrst proved by Adel’son-Vel’ski˘ı and Landis in 1962 [1], that logarithmic update cost can be achieved simultaneously with logarithmic search cost in binary search trees. Since the appearance of [1], many other rebalancing schemes have been proposed. Almost all reproduce the result of [1] in the sense that they, too, guarantee a height of c · log(n) for some constant c > 1, while handling updates in O(log n) time. The schemes can be grouped according to the ideas used for deﬁnition of balance, the ideas used for rebalancing, and the exact complexity results achieved.

10.3.1

Balance Deﬁnitions

The balance deﬁnition is a structural constraint on the tree ensuring logarithmic height. Many schemes can viewed as belonging to one of the following three categories: schemes with a constraint based on the heights of subtrees, schemes with a constraint based on the sizes of subtrees, and schemes which can be seen as binarizations of multi-way search tree schemes and which have a constraint inherited from these. The next section will give examples of each. For most schemes, balance information is stored in the nodes of the tree in the form of single bits or numbers. The structural constraint is often expressed as an invariant on this information, and the task of the rebalancing algorithm is to reestablish this invariant after an update.

10.3.2

Rebalancing Algorithms

The rebalancing algorithm restores the structural constraint of the scheme if it is violated by an update. It uses the balance information stored in the nodes to guide its actions. The general form of the algorithm is the same in almost all rebalancing schemes—balance violations are removed by working towards the root along the search path from the leaf where the update took place. When removing a violation at one node, another may be introduced at its parent, which is then handled, and so forth. The process stops at the root at the latest. The violation at a node is removed in O(1) time by a local restructuring of the tree and/or a change of balance information, giving a total worst case update time proportional to the height of the tree. The fundamental restructuring operation is the rotation, shown in Figure 10.1. It was introduced in [1]. The crucial feature of a rotation is that it preserves the in-order invariant of the search tree while allowing one subtree to be moved upwards in the tree at the expense of another. A rotation may be seen as substituting a connected subgraph T consisting of two nodes with a new connected subgraph T on the same number of nodes, redistributing the keys (here x and y) in T according to in-order, and redistributing the subtrees rooted at leaves

© 2005 by Chapman & Hall/CRC

10-6

Handbook of Data Structures and Applications y

x

↔

x

y

C A

A

B

B

C

FIGURE 10.1: Rotation. of T by attaching them as leaves of T according to in-order. Described in this manner, it is clear that in-order will be preserved for any two subgraphs T and T having an equal number of nodes. One particular case is the double rotation shown in Figure 10.2, so named because it is equivalent to two consecutive rotations.

z

y

x D

y A B

C

→

x A

z B

C

D

FIGURE 10.2: Double rotation. Actually, any such transformation of a connected subgraph T to another T on the same number of nodes can be executed through a series of rotations. This can be seen by noting that any connected subgraph can be converted into a right-path, i.e., a tree where all left children are empty trees, by repeated rotations (in Figure 10.1, if y but not x is on the rightmost path in the tree, the rotation will enlarge the rightmost path by one node). Using the right-path as an intermediate state and running one of the conversions backwards will transform T into T . The double rotation is a simple case of this. In a large number of rebalancing schemes, the rebalancing algorithm performs at most one rotation or double rotation per node on the search path. We note that rebalancing schemes exist [34] where the rebalancing along the search path is done in a top-down fashion instead of the bottom-up fashion described above. This is useful when several processes concurrently access the tree, as discussed in Section 10.8. In another type of rebalancing schemes, the restructuring primitive used is the rebuilding of an entire subtree to perfect balance, where perfect balance means that any node is the median among the nodes in its subtree. This primitive is illustrated in Figure 10.3. In these rebalancing schemes, the restructuring is only applied to one node on the search path for the update, and this resolves all violations of the balance invariant. The use of this rebalancing technique is sometimes termed local or partial rebuilding (in contrast to global rebuilding of data structures, which designates a periodically rebuilding of the entire structure). In Section 10.5, we discuss linear time algorithms for rebalancing a (sub-)tree to perfect balance.

10.3.3

Complexity Results

Rebalancing schemes can be graded according to several complexity measures. One such measure is how much rebalancing work is needed after an update. For this measure, typical

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

11111 00000 00000 11111 00000 11111 00000 11111 00000 11111

10-7

→

11111 00000 00000 11111 00000 11111 00000 11111 00000 11111

FIGURE 10.3: Rebuilding a subtree.

values include amortized O(log n), worst case O(log n), amortized O(1), and worst case O(1). Values below logarithmic may at ﬁrst sight seem useless due to the logarithmic search time of balanced search trees, but they are relevant in a number of settings. One setting is ﬁnger search trees (described in a chapter of their own in this book), where the search for the update point in the tree does not start at the root and hence may take sub-logarithmic time. Another setting is situations where the nodes of the tree are annotated with information which is expensive to update during restructuring of the tree, such that rotations may take non-constant time. This occurs in Computational Geometry, for instance. A third setting is concurrent access to the tree by several processes. Searching the tree concurrently is not a problem, whereas concurrent updates and restructuring may necessitate lockings of nodes in order to avoid inconsistencies. This makes restructuring more expensive than searches. Another complexity measure is the exact height maintained. The majority of schemes maintain a height bounded by c · log n for some constant c > 1. Of other results, splay trees [70] have no sub-linear bound on the height, but still perform searches in amortized O(log n) time. Splay trees are described in a chapter of their own in this book. In the other direction, a series of papers investigate how close c can get to the optimal value one, and at what rebalancing cost. We discuss these results in Section 10.7. One may also consider the exact amount of balance information stored in each node. Some schemes store an integer, while some only need one or two bits. This may eﬀect the space consumption of nodes, as a single bit may be stored implicitly, e.g., as the sign bit of a pointer, or by storing subtrees out of order when the bit is set. Schemes even exist which do not need to store any information at all in nodes. We discuss these schemes in Section 10.6 Finally, measures such as complexity of implementation and performance in practice can also be considered. However, we will not discuss these here, mainly because these measures are harder to quantify.

10.4 10.4.1

Classic Balancing Schemes AVL-Trees

AVL-trees where introduced in 1962 in [1], and are named after their inventors Adel’sonVel’ski and Landis. They proposed the ﬁrst dictionary structure with logarithmic search and update times, and also introduced the rebalancing technique using rotations. The balance deﬁnition in AVL-trees is based on the height of subtrees. The invariant is that for any node, the heights of its two subtrees diﬀer by at most one. Traditionally, the balance information maintained at each node is +1, 0, or −1, giving the diﬀerence in heights between the right subtree and the left subtree. This information can be represented by two bits. Another method is to mark a node when its height is larger than its siblings. This requires only one bit per node, but reading the balance of a node now involves visiting

© 2005 by Chapman & Hall/CRC

10-8

Handbook of Data Structures and Applications

its children. In the other direction, storing the height of each node requires log log n bits of information per node, but makes the rebalancing algorithms simpler to describe and analyze. By induction on h, it is easily proved that for an AVL-tree of height h, the minimum number of nodes is Fh+2 − 1, where Fi denotes the i’th Fibonacci number, deﬁned by F1 = F2 = 1 and Fj+2 = Fj+1 + Fj . A √ well-known fact for Fibonacci numbers is that Fi ≥ Φi−2 , where Φ is the golden ratio ( 5 + 1)/2 ≈ 1.618. This shows that the height of an AVL-tree with n nodes is at most logΦ (n + 1), i.e., AVL-trees have a height bound of the type c · log n with c = 1/ log Φ ≈ 1.440. After an update, violations of the balance invariant can only occur at nodes on the search path from the root to the update point, as only these nodes have subtrees changed. The rebalancing algorithm resolves these in a bottom-up fashion. At each node, it either performs a rotation, performs a double rotation, or just updates balance information, with the choice depending on the balance of its child and grandchild on the search path. The algorithm stops when it can guarantee that no ancestor has a balance problem, or when the root is reached. In AVL-trees, the rebalancing algorithm has the following properties: After an insertion, change of balance information may take place any number of steps towards the root, but as soon as a rotation or double rotation takes place, no further balance problems remain. Hence, only O(1) structural change is made. In contrast, after a deletion it may happen that rotations are performed at all nodes on the search path. If only insertions take place, the amortized amount of rebalancing work, including updating of balance information, can be shown [58] to be O(1). The same is true if only deletions take place [75]. It is not true in the fully dynamic case, as it is easy to ﬁnd an AVL-tree where alternating insertions and deletions of the same key require rebalancing along the entire search path after each update.

10.4.2

Weight-Balanced Trees

Weight-balanced trees were proposed in 1973 by Nievergelt and Reingold [62], and have a balance deﬁnition based on the sizes of subtrees. Here, the size of a subtree is most conveniently deﬁned as the number of external nodes (empty trees) in the subtree, and the size, also denoted the weight, of a node is the size of its subtree. The balance invariant of weight-balanced trees states that for any node, the ratio between its own weight and the weight of its right child (or left) is in the interval [ α , 1 − α ] for some ﬁxed value α > 0. This ratio is denoted the balance of the node. Since a node of weight three must have subtrees of weight two and one, we must have α ≤ 1/3. Weight-balanced trees are also called BB[α]-trees, which stands for trees of bounded balance with parameter α. By the balance criterion, for any node v the weight of the parent of v is at least a factor 1/(1 − α) larger than the weight of v. A tree of height k therefore has a root of weight at least 1/(1 − α)k , which shows that the height of a weight-balanced tree with n nodes is at most log1/(1−α) (n + 1), i.e., weight-balanced trees have a height bound of the type c · log n with c = −1/ log(1 − α) > 1.709. The balance information stored in each node is its weight, for which log n bits are needed. After an update, this information must be updated for all nodes on the search path from the root to the update point. Some of these nodes may now violate the balance criterion. The rebalancing algorithm proposed in [62] resolves this unbalance in a bottom-up fashion along the search path using either a rotation or a double rotation at each violating node. The choice of rotation depends on the weight of the children and the grandchildren of the node.

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-9

√ In [62], the rebalancing algorithm was claimed to work for α in the interval [ 0 , 1−1/√2 ], but Blum and Mehlhorn [20] later observed that the correct interval is (2/11 , 1 − 1/ 2 ]. They also showed that for α strictly inside this interval, the rebalancing of an unbalanced node restores its balance to a value in [ (1 + δ)α , 1 − (1 + δ)α ], where δ depends on the choice of α. This implies that when the node becomes unbalanced again, the number of updates which have taken place below it since it was last rebalanced is at least a fraction (depending on α) of its current weight. This feature, unique to weight-balanced trees, has important applications, e.g., for data structures in Computational Geometry. A number of these structures are binary search trees where each node has an associated secondary structure built on the elements in the subtree of the node. When a rotation takes place, the structures of the nodes taking part in the rotation will have to be rebuilt. If we attribute the cost of this rebuilding evenly to the updates which have taken place below the node since it was last involved in a rotation, then, as an example, a linear rebuilding cost of the secondary structure will amount to a constant attribution to each of these updates. As the search path for an update contains O(log n) nodes, any single update can at most receive this many attributions, which implies an amortized O(log n) update complexity for the entire data structure. The same analysis allows BB[α]-trees to be maintained by local rebuilding instead of rotations in amortized O(log n) time, as ﬁrst noted by Overmars and van Leeuwen [69]: After an update, the subtree rooted at the highest unbalanced node (if any) on the search path is rebuilt to perfect balance. Since a rebuilding of a subtree leaves all nodes in it with balance close to 1/2, the number of updates which must have taken place below the node since it was last part of a rebuilding is a constant fraction of its current weight. The rebuilding uses work linear in this weight, which can be covered by attributing a constant amount of work to each of these updates. Again, each update is attributed O(log n) work. This scheme will work for any α ≤ 1/3. For the original rebalancing algorithm using rotations, a better analysis can be made √ for α chosen strictly inside the interval (2/11 , 1 − 1/ 2 ]: The total work per rebalancing operation is now O(1), so the work to be attributed to each update below a node is O(1/w), where w is the weight of the node. As noted above in the proof of the height bound of weight-balanced trees, w is exponentially increasing along the search path from the update point to the root. This implies that each update is attributed only O(1) work in total, and also that the number of rotations taking place at a given height decreases exponentially with the height. This result from [20] seems to be the ﬁrst on O(1) amortized rebalancing in binary search trees. The actual time spent after an update is still logarithmic in weightbalanced trees, though, as the balance information needs to be updated along the entire search path, but this entails no structural changes. Recently, the idea of balancing by weight has been applied to multi-way search trees [14], leading to trees eﬃcient in external memory which posses the same feature as weightbalanced binary trees, namely that between each rebalancing at a node, the number of updates which have taken place below the node is proportional to the weight of the node.

10.4.3

Balanced Binary Trees Based on Multi-Way Trees.

The B-tree [17], which is treated in another chapter of this book, is originally designed to handle data stored on external memory. The basic idea is to associate a physical block with a high-degree node in a multi-way tree. A B-tree is maintained by merging and splitting nodes, and by increasing and decreasing the number of layers of multi-way nodes. The smallest example of a B-tree is the 2-3-tree [2], where the nodes have degree 2 or 3. In a typical B-tree implementation, the degree of a node is much larger, and it varies roughly

© 2005 by Chapman & Hall/CRC

10-10

Handbook of Data Structures and Applications

within a factor of 2. The concept of multi-way nodes, splitting, and merging, has also proven to be very fruitful in the design of balancing schemes for binary trees. The ﬁrst such example is the binary B-tree [15], a binary implementation of 2-3-trees. Here, the idea is to organize binary nodes into larger chunks of nodes, here called pseudo-nodes. In the binary version of a 2-3-tree, a node of degree 2 is represented by one binary node, while a node of degree 3 is represented as two binary nodes (with the additional constraint that one of the two nodes is the right child of the other). In the terms of binary nodes grouped into pseudo-nodes, it is convenient to say that edges within a pseudo-node are horizontal while edges between pseudo-nodes are vertical. As a natural extension of binary B-trees, Bayer invented Symmetric Binary Trees, or SBBtrees [16]. The idea was that, instead of only allowing a binary node to have one horizontal outgoing edge to its right child, we can allow both left- and right-edges to be horizontal. For both binary B-trees and Symmetric Binary B-trees, Bayer designed maintenance algorithms, where the original B-tree operations split, merge, and increase/decrease number of levels were implemented for the pseudo-nodes. Today, SBB-trees mostly appear under the name red-black trees [34]. Here, the horizontal and vertical edges are represented by one “color” per node. (Both notations can be represented by one bit per node.) SBB/red-black trees are binary implementations of B-trees where each node has degree between 2 and 4. One advantage with SBB-trees/red-black trees is that a tree can be updated with only a constant number of rotations per insertion or deletion. This property is important for example when maintaining priority search trees [56] where each rotation requires Θ(log n) time. The ﬁrst binary search tree with O(1) rotations per update was the half-balanced trees by Olivi´e [66]. Olivi´e’s idea was to use path-balancing, where the quotient between the shortest and longest path from each node is restricted to be at most 1/2, and he showed that this path-balance could be maintained with O(1) rotations per update. It turns out to be the case that half-balanced trees and SBB/red-black trees are structurally equivalent, although their maintenance algorithms are diﬀerent. It has also been proven by Tarjan [73] that SBB/red-black trees can be maintained by O(1) rotations. These algorithms can also be generalized to maintain pseudo-nodes of higher degree, resulting in binary B-tree implementations with lower height [8], still requiring O(1) rotations per update. The mechanism behind the constant number of rotations per update can be explained in a simple way by examining three cases of what can happen during insertion and deletion in a binary B-tree representation. • When a pseudo-node becomes too large, it can be split into two pseudo-nodes without any rotation; we just need to change the balance information. • Also, when a pseudo-node becomes too small and its sibling has minimal size, these two nodes can be merged without any rotation; we just change balance information. • In all other cases, when a pseudo-node becomes too small or too large, this will be resolved by moving nodes between the pseudo-node and its sibling and no splitting or merging will take place. From these three basic facts, it can be shown that as soon as the third case above occurs, no more rebalancing will be done during the same update. Hence, the third case, requiring rotations, will only occur once per update. For details, we refer to the literature [8, 73]. Binary B-trees can also be used to design very simple maintenance algorithms that are

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-11

easy to code. This is illustrated by AA-trees [5, 77]. AA-trees are actually the same as Bayer’s binary version of 2-3-trees, but with design focused on simplicity. Compared with normal red-black tree implementations, AA-trees require very few diﬀerent cases in the algorithm and much less code for implementation. While binary B-trees and SBB/red-black trees deal with small pseudo-nodes, the stratiﬁed trees by van Leeuwen and Overmars [76] use large pseudo-nodes arranged in few layers. The concept of stratiﬁcation does not imply that all pseudo-nodes have similar size; it is mainly a way to conceptually divide the tree into layers, using the notion of merging and splitting.

10.5

Rebalancing a Tree to Perfect Balance

A basic operation is the rebalancing operation, which takes a binary tree as input and produces a balanced tree. This operation is important in itself, but it is also used as a subroutine in balancing schemes (see Section 10.6). It is quite obvious that one can construct a perfectly balanced tree from an ordered tree, or a sorted list, in linear time. The most straightforward way is to put the elements in sorted order into an array, take the median as the root of the tree, and construct the left and right subtrees recursively from the upper and lower halves of the array. However, this is unnecessarily cumbersome in terms of time, space, and elegance. A number of restructuring algorithms, from the type mentioned above to more elegant and eﬃcient ones based on rotations, can be found in the literature [26, 27, 33, 54, 72]. Of these, the one by Stout and Warren [72] seems to be most eﬃcient. It uses the following principle: 1. Skew. Make right rotations at the root until no left child remains. Continue down the right path making right rotations until the entire tree becomes one long rightmost path (a “vine”). 2. Split. Traverse down the vine a number of times, each time reducing the length of the vine by left rotations. If we start with a vine of length 2p − 1, for some integer p, and make one rotation per visited node, the resulting vine will be of length 2p−1 − 1 after the ﬁrst pass, 2p−2 − 1 after the second pass, etc., until the vine is reduced to a single node; the resulting tree is a perfectly balanced tree. If the size of the tree is 2p − 1 , this will work without any problem. If, however, the size is not a power of two, we have to make some special arrangements during the ﬁrst pass of left rotations. Stout and Warren solved the problem of how to make evenly distributed rotations along the vine in a rather complicated way, but there is a simpler one. It has never before been published in itself, but has been included in demo software and in published code [6, 11]. The central operation is a split operation that takes as parameters two numbers p1 and p2 and compresses a right-skewed path of p1 nodes into a path of p2 nodes (2p2 ≥ p1 ). The simple idea is to use a counter stepping from p1 − p2 to p2 (p1 − p2 ) with increment p1 − p2 . Every time this counter reaches or exceeds a multiple of p2 , a rotation is performed. In eﬀect, the operation will make p1 − p2 evenly distributed left rotations. With this split operation available, we can do as follows to rebalance a tree of size n (n internal nodes): First, skew the tree. Next, ﬁnd the largest integer b such that b is an even power of 2 and b − 1 ≤ n. Then, if b − 1 < n, call Split with parameters n and b − 1. Now, the vine will have proper length and we can traverse it repeatedly, making a left rotation at each visited node, until only one node remains.

© 2005 by Chapman & Hall/CRC

10-12

Handbook of Data Structures and Applications

In contrast to the Stout-Warren algorithm, this algorithm is straightforward to implement. We illustrate it in Figure 10.4. We describe the ﬁve trees, starting with the topmost: 1. A tree with 12 internal nodes to be balanced. 2. After Skew. 3. With n = 12 and b = 8, we call split with parameters 12 and 7, which implies that ﬁve evenly distributed rotations will be made. As the result, the vine will be of length 7, which fulﬁlls the property of being 2p − 1. 4. The next split can be done by traversing the vine, making one left rotation at each node. As a result, we get a vine of length 3 (nodes 3, 6, and 10). 5. After the ﬁnal split, the tree is perfectly balanced.

10.6

Schemes with no Balance Information

As discussed above, a balanced binary search tree is typically maintained by local constraints on the structure of the tree. By keeping structure information in the nodes, these constraints can be maintained during updates. In this section, we show that a plain vanilla tree, without any local balance information, can be maintained eﬃciently. This can be done by coding the balance information implicitly (Section 10.6.1) or by using global instead of local balance criteria, hereby avoiding the need for balance information (Section 10.6.2). Splay trees [70] also have no balance information. They do not have a sub-linear bound on their height, but still perform searches in amortized O(log n) time. Splay trees are described in a chapter of their own in this book.

10.6.1

Implicit Representation of Balance Information

One idea of how to remove the need for local balance information is to store the information implicitly. There are two main techniques for this: coding information in the way empty pointers are located or coding information by changing the order between left and right children. In both cases, we can easily code one bit implicitly at each internal node, but not at external nodes. Therefore, we weed to use balance schemes that can do with only one bit per internal node and no balance information at external nodes. As an example, we may use the AVL-tree. At each node, we need to keep track of whether the two subtrees have the same height or if one of them is one unit higher than its sibling. We can do this with one bit per internal node by letting the bit be 1 if and only if the node is higher than its sibling. For external nodes we know the height, so no balance information is needed there. The assumption that we only need one bit per internal node is used in the two constructions below. Using Empty Pointers

As pointed out by Brown [24, 25], the explicitly stored balance information may in some classes of balanced trees be eliminated by coding the information through the location of empty pointers. We use a tree of pseudo-nodes, where a pseudo-node contains two consecutive elements, stored in two binary nodes. The pseudo-node will have three outgoing pointers, and since the two binary nodes are consecutive, one of the three pointers will be

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-13 8 3

9

1

7 2

11

4

10

12

6 5 1

2

3

4

5

6

7

8

9

10

11

12

1 3 2

5 4

6 8 7

10 9

12 11

3 1

6 2

5

10

4

8 7

12 9

11

6 3

10

1

5 2

4

8 7

12 9

11

FIGURE 10.4: Rebalancing a binary search tree.

empty. By varying which of the two nodes become parent, we can arrange the pseudonode in two ways. These two diﬀerent structures is used to represent bit values 0 and 1, respectively; by checking the position of the empty pointer, we can compute the bit value. In order for this to work, we allow the pseudo-nodes at the bottom of the tree to contain one or two binary nodes. During insertion, we traverse down the tree. If the inserted element lies between the two keys in a visited pseudo-node, we replace it by one of the elements in the pseudo-node and

© 2005 by Chapman & Hall/CRC

10-14

Handbook of Data Structures and Applications

continue down the tree with that element instead. At the bottom of the tree, if we ﬁnd a pseudo-node with only one key, we just add the new key. If, on the other hand, we ﬁnd a pseudo-node with two keys, we split it into two pseudo-nodes which will cause an insertion in the tree of pseudo-nodes. Rotations etc. can be done with pseudo-nodes instead of ordinary binary nodes. (If a rotation involves the lowest level of the tree of pseudo-nodes, some care has to be taken in order to maintain the invariant that only the lowest pseudo-nodes may contain a single node.) Deletions are handled correspondingly. If the deleted element is contained in an internal pseudo-node, we replace it by its predecessor or successor, which resides at the bottom of the tree; in this way we ensure that the deletion occurs at the bottom. If the deletion occurs at a pseudo-node with two binary nodes, we just remove the node, if the pseudo-node contains only one node, a deletion occurs in the tree of pseudo-nodes. Despite the pseudo-nodes, the tree is really just a binary search tree where no balance information is explicitly stored. Since each pseudo-node has internal height 2, and the number of pseudo-nodes is less than n, the height of the binary tree is O(log n). A drawback is that the height of the underlying binary tree will become higher by the use of pseudonodes. Instead of n internal nodes we will have roughly n/2 pseudo-nodes, each of height 2. In the worst case, the height of the binary tree will be doubled. Swapping Pointers

Another possibility for coding information into a structure is to use the ordering of nodes. If we redeﬁne binary search trees, such that the left and right subtree of a node are allowed to change place, we can use this possibility to encode one bit per node implicitly. By comparing the keys of the two children of a node, the one-bit information can be extracted. During search, we have to make one comparison extra at each node. This idea has been used by Munro and Suwanda [59–61] to achieve implicit implementation of binary search trees, but it can of course also be used for traditional pointer-based tree structures.

10.6.2

General Balanced Trees

In the following, we use |T | to denote the weight (number of leaves) in a tree T . We also use |v| to denote the weight of a subtree rooted at node v. It should be noted that for a tree T storing n keys in internal nodes, |T | = n + 1 Instead of coding balance information into the structure of the tree, we can let the tree take any shape, as long as its height is logarithmic. Then, there is no local balance criterion to maintain, and we need no balance information in the nodes, not even implicitly coded. As we show below, the tree can still be maintained eﬃciently. When maintaining trees this way, we use the technique of partial rebuilding. This technique was ﬁrst introduced by Overmars and van Leeuwen [68, 69] for maintaining weightbalanced trees. By making a partial rebuilding at node v, we mean that the subtree rooted at v is rebuilt into a perfectly balanced tree. The cost of such rebalancing is Θ(|v|). In Section 10.5, we discuss linear time algorithms for rebalancing a (sub-)tree to perfect balance. Apart from the advantage of requiring no balance information in the nodes, it can be shown [7] that the constant factor for general balanced trees is lower than what has been shown for the maintenance of weight-balanced trees by partial rebuilding. The main idea in maintaining a general balanced tree is to let the tree take any shape as long as its height does not exceed log |T | by more than a speciﬁed constant factor. The key observation is that whenever the tree gets too high by an insertion, we can ﬁnd a node where partial rebuilding can be made at a low amortized cost. (Since deletions do not

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-15

increase the height of the tree, we can handle deletions eﬃciently by rebuilding the entire tree after a large number of elements have been deleted.) We use two constants c > 1, and b > 0, and we maintain a balanced tree T with maximum height c log |T | + b. No balance information is used, except two global integers, containing |T |, the number of leaves in T , and d(T ), the number of deletions made since the last time the entire tree T was rebalanced. Updates are performed in the following way: Insertion: If the depth of the new leaf exceeds c log(|T |+d(T )), we back up along the insertion path until we ﬁnd the lowest node v, such that h(v) > c log |v|. The subtree v is then rebuilt to perfect balance. The node v is found by explicitly traversing the subtrees below the nodes on the path from the inserted leaf to v, while counting the number of leaves. The cost for this equals the cost for traversing the subtree below v once, which is O(|v|). Deletion: d(T ) increases by one. If d(T ) ≥ (2b/c − 1)|T |, we rebuild T to perfect balance and set d(T ) = 0. First, we show that the height is low enough. Since deletions do not increase the height of T , we only need to show that the height is not increased too much by an insertion. We prove this by induction. Assume that h(T ) ≤ c log(|T | + d(T ))

(10.1)

holds before an insertion. (Note that the height of an empty tree is zero.) During the insertion, the height condition can only be violated by the new node. However, if such a violation occurs, the partial rebuilding will ensure that Inequality 10.1 holds after the insertion. Hence, Inequality 10.1 holds by induction. Combining this with the fact that d(T ) < (2b/c − 1)|T |, we get that h(T ) ≤ c log |T | + b. Next, we show that the maintenance cost is low enough. Since the amortized cost for the rebuilding of the entire tree caused by deletions is obviously O(1) per deletion, we only need to consider insertions. In fact, by the way we choose where to perform rebuilding, we can guarantee that when a partial rebuilding occurs at node v, Ω(v) updates have been made below v since the last time v was involved in a partial rebuilding. Indeed, this observation is the key observation behind general balanced trees. Let vH be v’s child on the path to the inserted node. By the way v is selected by the algorithm, we know the following about v and vh : h(v) > h(vH ) ≤ h(v) =

c log |v| c log |vH |

(10.2) (10.3)

h(vh ) + 1

(10.4)

Combining these, we get c log |v| < h(v) = h(vH ) + 1 ≤ c log |vH | + 1

(10.5)

and, thus log |v| < |vH | >

© 2005 by Chapman & Hall/CRC

log |vH | + 1/c 2−1/c |v|

(10.6)

10-16

Handbook of Data Structures and Applications 8 5

16

1

7 4

14

6

9

19 15

3

18

12

2

11

17 13

10

8 5

16

1

7 4 3

12

6

19

10 9

14 11

13

18 15

17

2

FIGURE 10.5: Upper tree: A GB(1.2)-tree which requires rebalancing. Lower tree: After partial rebuilding.

Since 2−1/c > 1/2, we conclude that the weight of vH is Θ(v) larger than the weight of v’s other child. The only way this diﬀerence in weight between the two children can occur is by insertions or deletion below v. Hence, Ω(v) updates must have been made below v since the last time v was involved in a partial rebuilding. In order for the amortized analysis to hold, we need to reserve a constant cost at v for each update below v. At each update, updates are made below O(log n) nodes, so the total reservation per update is O(log n). Since the tree is allowed to take any shape as long as its height is low enough, we call this type of balanced tree general balanced trees [7]. We use the notation GB-trees or GB(c)trees, where c is the height constant above. (The constant b is omitted in this notation.) (The idea of general balanced trees have also been rediscovered under the name scapegoat trees [33].) Example. The upper tree in Figure 10.5 illustrates a GB(1.2)-tree where ﬁve deletions and some insertions have been made since the last global rebuilding. When inserting 10, the height becomes 7, which is too high, since 7 > c log(|T |+d(T )) = 1.2 log(20+5) = 6. We back up along the path until we ﬁnd the node 14. The height of this node is 5 and the weight is 8. Since 5 > 1.2 log 8, we can make a partial rebuilding at that node. The resulting tree is shown as the lower tree in Figure 10.5.

10.6.3

Application to Multi-Dimensional Search Trees

The technique of partial rebuilding is an attractive method in the sense that it is useful not only for ordinary binary search trees, but also for more complicated data structures, such as multi-dimensional search trees, where rotations cannot be used eﬃciently. For example, partial rebuilding can be used to maintain logarithmic height in k-d trees [19]

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-17

under updates [57, 68, 69]. A detailed study of the use of partial rebuilding can be found in Mark Overmars’ Ph.D. thesis [68]. For the sake of completeness, we just mention that if thecost of rebalancing a subtree v is O(P (|v|)), the amortized cost of an update will P (n) n

be O

log n . For example, applied to k-d trees, we get an amortized update cost of

2

O(log n).

10.7

Low Height Schemes

Most rebalancing schemes reproduce the result of AVL-trees [1] in the sense that they guarantee a height of c · log(n) for some constant c > 1, while doing updates in O(log n) time. Since the height determines the worst-case complexity of almost all operations, it may be reasonable to ask exactly how close to the best possible height log(n + 1) a tree can be maintained during updates. Presumably, the answer depends on the amount of rebalancing work we are willing to do, so more generally the question is: given a function f , what is the best possible height maintainable with O(f (n)) rebalancing work per update? This question is of practical interest—in situations where many more searches than updates are performed, lowering the height by factor of (say) two will improve overall performance, even if it is obtained at the cost of a larger update time. It is also of theoretical interest, since we are asking about the inherent complexity of maintaining a given height in binary search trees. In this section, we review the existing answers to the question. Already in 1976, Maurer et al. [55] proposed the k-neighbor trees, which guarantee a height of c · log(n), where c can be chosen arbitrarily close to one. These are unarybinary trees, with all leaves having the same depth and with the requirement that between any two unary nodes on the same level, at least k − 1 binary nodes appear. They may be viewed as a type of (1, 2)-trees where the rebalancing operations exchange children, not only with neighboring nodes (as in standard (a, b)-tree or B-tree rebalancing), but with nodes a horizontal distance k away. Since at each level, at most one out of k nodes is unary, the number of nodes increases by a factor of (2(k − 1) + 1)/k = 2 − 1/k for each level. This implies a height bound of log2−1/k n = log(n)/ log(2 − 1/k). By ﬁrst order approximation, log(1 + x) = Θ(x) and 1/(1 + x) = 1 − Θ(x) for x close to zero, so 1/ log(2 − 1/k) = 1/(1 + log(1 − 1/2k)) = 1 + Θ(1/k). Hence, k-trees maintain a height of (1 + Θ(1/k)) log n in time O(k log n) per update. Another proposal [8] generalizes the red-black method of implementing (2, 4)-trees as binary trees, and uses it to implement (a, b)-trees as binary trees for a = 2k and b = 2k+1 . Each (a, b)-tree node is implemented as a binary tree of perfect balance. If the underlying (a, b)-tree has t levels, the binary tree has height at most t(k +1) and has at least (2k )t = 2kt nodes. Hence, log n ≥ tk, so the height is at most (k + 1)/k log n = (1 + 1/k) log n. As in red-black trees, a node splitting or fusion in the (a, b)-tree corresponds to a constant amount of recoloring. These operations may propagate along the search path, while the remaining rebalancing necessary takes place at a constant number of (a, b)-tree nodes. In the binary formulation, these operations involve rebuilding subtrees of size Θ(2k ) to perfect balance. Hence, the rebalancing cost is O(log(n)/k + 2k ) per update. Choosing k = log log n gives a tree with height bound log n + log(n)/ log log(n) and update time O(log n). Note that the constant for the leading term of the height bound is now one. To accommodate a non-constant k, the entire tree is rebuilt when log log n changes. Amortized this is O(1) work, which can be made a worst case bound by using incremental rebuilding [68]. Returning to k-trees, we may use the method of non-constant k also there. One possibility

© 2005 by Chapman & Hall/CRC

10-18

Handbook of Data Structures and Applications

is k = Θ(log n), which implies a height bound as low as log n + O(1), maintained with O(log2 n) rebalancing work per update. This height is O(1) from the best possible. A similar result can be achieved using the general balanced trees described in Section 10.6: In the proof of complexity in that section, the main point is that the cost |v| of a rebuilding at a node v can be attributed to at least (2−1/c − 1/2)|v| updates, implying that each update is attributed at most (1/(2−1/c − 1/2)) cost at each of the at most O(log n) nodes on the search path. The rebalancing cost is therefore O(1/(2−1/c − 1/2) log n) for maintaining height c · log n. Choosing c = 1 + 1/ log n gives a height bound of log n + O(1), maintained in O(log2 n) amortized rebalancing work per update, since (2−1/(1+1/ log n)) − 1/2) can be shown to be Θ(1/ log n) using the ﬁrst order approximations 1/(1 + x) = 1 − Θ(x) and 2x = 1 + Θ(x) for x close to zero. We note that a binary tree with a height bound of log n + O(1) in a natural way can be embedded in an array of length O(n): Consider a tree T with a height bound of log n + k for an integer k, and consider n ranging over the interval [2i ; 2i+1 [ for an integer i. For n in this interval, the height of T never exceeds i + k, so we can think of T as embedded in a virtual binary tree T with i + k completely full levels. Numbering nodes in T by an in-order traversal and using these numbers as indexes in an array A of size 2i+k − 1 gives an embedding of T into A. The keys of T will appear in sorted order in A, but empty array entries may exist between keys. An insertion into T which violates the height bound corresponds to an insertion into the sorted array A at a non-empty position. If T is maintained by the algorithm based on general balanced trees, rebalancing due to the insertion consists of rebuilding some subtree in T to perfect balance, which in A corresponds to an even redistribution of the elements in some consecutive segment of the array. In particular, the redistribution ensures an empty position at the insertion point. In short, the tree rebalancing algorithm can be used as a maintenance algorithm for a sorted array of keys supporting insertions and deletions in amortized O(log2 n) time. The requirement is that the array is never ﬁlled to more than some ﬁxed fraction of its capacity (the fraction is 1/2k−1 in the example above). Such an amortized O(log2 n) solution, phrased directly as a maintenance algorithm for sorted arrays, ﬁrst appeared in [38]. By the converse of the embedding just described, [38] implies a rebalancing algorithm for low height trees with bounds as above. This algorithm is similar, but not identical, to the one arising from general balanced trees (the criteria for when to rebuild/redistribute are similar, but diﬀer in the details). A solution to the sorted array maintenance problem with worst case O(log2 n) update time was given in [78]. Lower bounds for the problem appear in [28, 29], with one of the bounds stating that for algorithms using even redistribution of the elements in some consecutive segment of the array, O(log2 n) time is best possible when the array is ﬁlled up to some constant fraction of its capacity. We note that the correspondence between the tree formulation and the array formulation only holds when using partial rebuilding to rebalance the tree—only then is the cost of the redistribution the same in the two versions. In contrast, a rotation in the tree will shift entire subtrees up and down at constant cost, which in the array version entails cost proportional to the size of the subtrees. Thus, for pointer based implementation of trees, the above Ω(log2 n) lower bound does not hold, and better complexities can be hoped for. Indeed, for trees, the rebalancing cost can be reduced further. One method is by applying the idea of bucketing: The subtrees on the lowest Θ(log K) levels of the tree are changed into buckets holding Θ(K) keys. This size bound is maintained by treating the buckets as (a, b)-tree nodes, i.e., by bucket splitting, fusion, and sharing. Updates in the top tree only happen when a bucket is split or fused, which only happens for every Θ(K) updates in the bucket. Hence, the amortized update time for the top tree drops by a factor K. The buckets themselves can be implemented as well-balanced binary trees—using the schemes

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-19

above based on k-trees or general balanced trees for both top tree and buckets, we arrive at a height bound of log n + O(1), maintained with O(log log2 n) amortized rebalancing work. Applying the idea recursively inside the buckets will improve the time even further. This line of rebalancing schemes was developed in [3, 4, 9, 10, 42, 43], ending in a scheme [10] maintaining height log(n + 1) + 1 with O(1) amortized rebalancing work per update. This rather positive result is in contrast to an observation made in [42] about the cost of maintaining exact optimal height log(n + 1): When n = 2i − 1 for an integer i, there is only one possible tree of height log(n+ 1), namely a tree of i completely full levels. By the ordering of keys in a search tree, the keys of even rank are in the lowest level, and the keys of odd rank are in the remaining levels (where the rank of a key k is deﬁned as the number of keys in the tree that are smaller than k). Inserting a new smallest key and removing the largest key leads to a tree of same size, but where all elements previously of odd rank now have even rank, and vice versa. If optimal height is maintained, all keys previously in the lowest level must now reside in the remaining levels, and vice versa—in other words, the entire tree must be rebuilt. Since the process can be repeated, we obtain a lower bound of Ω(n), even with respect to amortized complexity. Thus, we have the intriguing situation that a height bound of log(n+1) has amortized complexity Θ(n) per update, while raising the height bound a triﬂe to log(n + 1) + 1 reduces the complexity to Θ(1). Actually, the papers [3, 4, 9, 10, 42, 43] consider a more detailed height bound of the form log(n + 1) + ε, where ε is any real number greater than zero. For ε less than one, this expression is optimal for the ﬁrst integers n above 2i − 1 for any i, and optimal plus one for the last integers before 2i+1 − 1. In other words, the smaller an ε, the closer to the next power of two is the height guaranteed to be optimal. Considering tangents to the graph of the logarithm function, it is easily seen that ε is proportional to the fraction of integers n for which the height is non-optimal. Hence, an even more detailed formulation of the question about height bound versus rebalancing work is the following: Given a function f , what is the smallest possible ε such that the height bound log(n + 1) + ε is maintainable with O(f (n)) rebalancing work per update? In the case of amortized complexity, the answer is known. In [30], a lower bound is given, stating that no algorithm using o(f (n)) amortized rebuilding work per update can guarantee a height of log(n + 1) + 1/f (n) for all n. The lower bound is proved by mapping trees to arrays and exploiting a fundamental lemma on density from [28]. In [31], a balancing scheme was given which maintains height log(n + 1) + 1/f (n) in amortized O(f (n)) time per update, thereby matching the lower bound. The basic idea of the balancing scheme is similar to k-trees, but a more intricate distribution of unary nodes is used. Combined, these results show that for amortized complexity, the answer to the question above is ε(n) ∈ Θ(1/f (n)). We may view this expression as describing the inherent amortized complexity of rebalancing a binary search tree, seen as a function of the height bound maintained. Using the observation above that for any i, log(n + 1) + ε is equal to log(n + 1) for n from 2i − 1 to (1 − Θ(ε))2i+1 , the result may alternatively be viewed as the cost of maintaining optimal height when n approaches the next power of two: for n = (1 − ε)2i+1 , the cost is Θ(1/ε). A graph depicting this cost appears in Figure 10.6. This result holds for the fully dynamic case, where one may keep the size at (1 − ε)2i+1 by alternating between insertions and deletions. In the semi-dynamic case where only insertions take place, the amortized cost is smaller—essentially, it is the integral of the function in Figure 10.6, which gives Θ(n log n) for n insertions, or Θ(log n) per insertion.

© 2005 by Chapman & Hall/CRC

Handbook of Data Structures and Applications Rebalancing Cost Per Update

10-20

60 50 40 30 20 10 0 0

10

20

30 40 Size of Tree

50

60

70

FIGURE 10.6: The cost of maintaining optimal height as a function of tree size.

More concretely, we may divide the insertions causing n to grow from 2i to 2i+1 into i segments, where segment one is the ﬁrst 2i−1 insertions, segment two is the next 2i−2 insertions, and so forth. In segment j, we employ the rebalancing scheme from [31] with f (n) = Θ(2j ), which will keep optimal height in that segment. The total cost of insertions is O(2i ) inside each of the i segments, for a combined cost of O(i2i ), which is O(log n) amortized per insertion. By the same reasoning, the lower bound from [30] implies that this is best possible for maintaining optimal height in the semi-dynamic case. Considering worst case complexity for the fully dynamic case, the amortized lower bound stated above of course still applies. The best existing upper bound is height log(n + 1) + min{1/ f (n), log(n)/f (n)}, maintained in O(f (n)) worst case time, by a combination of results in [4] and [30]. For the semi-dynamic case, a worst case cost of Θ(n) can be enforced when n reaches a power of two, as can be seen by the argument above on odd and even ranks of nodes in a completely full tree.

10.8

Relaxed Balance

In the classic search trees, including AVL-trees [1] and red-black trees [34], balancing is tightly coupled to updating. After an insertion or deletion, the updating procedure checks to see if the structural invariant is violated, and if it is, the problem is handled using the balancing operations before the next operation may be applied to the tree. This work is carried out in a bottom-up fashion by either solving the problem at its current location using rotations and/or adjustments of balance variables, or by carrying out a similar operation which moves the problem closer to the root, where, by design, all problems can be solved. In relaxed balancing, the tight coupling between updating and balancing is removed. Basically, any restriction on when rebalancing is carried out and how much is done at a time is removed, except that the smallest unit of rebalancing is typically one single or double rotation. The immediate disadvantage is of course that the logarithmic height guarantee disappears, unless other methods are used to monitor the tree height. The advantage gained is ﬂexibility in the form of extra control over the combined process of updating and balancing. Balancing can be “turned oﬀ” during periods with frequent searching and updating (possibly from an external source). If there is not too much correlation between updates, the tree would likely remain fairly balanced during that time. When the frequency drops, more time can be spend on balancing. Furthermore, in multi-processor

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-21

environments, balancing immediately after an update is a problem because of the locking strategies with must be employed. Basically, the entire search path must be locked because it may be necessary to rebalance all the way back up to the root. This problem is discussed as early as in [34], where top-down balancing is suggested as a means of avoiding having to traverse the path again bottom-up after an update. However, this method generally leads to much more restructuring than necessary, up to Θ(log n) instead of O(1). Additionally, restructuring, especially in the form of a sequence of rotations, is generally signiﬁcantly more time-consuming than adjustment of balance variables. Thus, it is worth considering alternative solutions to this concurrency control problem. The advantages outlined above are only fully obtained if balancing is still eﬃcient. That is the challenge: to deﬁne balancing constraints which are ﬂexible enough that updating without immediate rebalancing can be allowed, yet at the same time suﬃciently constrained that balancing can be handled eﬃciently at any later time, even if path lengths are constantly super-logarithmic. The ﬁrst partial result, dealing with insertions only, is from [41]. Below, we discuss the results which support insertion as well as deletion.

10.8.1

Red-Black Trees

In standard red-black trees, the balance constraints require that no two consecutive nodes are red and that for any node, every path to a leaf has the same number of black nodes. In the relaxed version, the ﬁrst constraint is abandoned and the second is weakened in the following manner: Instead of a color variable, we use an integer variable, referred to as the weight of a node, in such a way that zero can be interpreted as red and one as black. The second constraint is then changed to saying that for any node, every path to a leaf has the same sum of weights. Thus, a standard red-black tree is also a relaxed tree; in fact, it is the ideal state of a relaxed tree. The work on red-black trees with relaxed balance was initiated in [64, 65]. Now, the updating operations must be deﬁned so that an update can be performed in such a way that updating will leave the tree in a well-deﬁned state, i.e., it must be a relaxed tree, without any subsequent rebalancing. This can be done as shown in Fig. 10.7. The operations are from [48]. The trees used here, and depicted in the ﬁgure, are assumed to be leaf-oriented. This terminology stems from applications where it is convenient to treat the external nodes diﬀerently from the remaining nodes. Thus, in these applications, the external nodes are not empty trees, but real nodes, possibly of another type than the internal nodes. In database applications, for instance, if a sequence of sorted data in the form of a linked list is already present, it is often desirable to build a tree on top of this data to facilitate faster searching. In such cases, it is often convenient to allow copies of keys from the leaves to also appear in the tree structure. To distinguish, we then refer to the key values in the leaves as keys, and refer to the key values in the tree structure as routers, since they merely guide the searching procedure. The ordering invariant is then relaxed, allowing keys in the left subtree of a tree rooted by u to be smaller than or equal to u.k, and the size of the tree is often deﬁned as the number of leaves. When using the terminology outlined here, we refer to the trees as leaf-oriented trees. The balance problems in a relaxed tree can now be speciﬁed as the relations between balance variables which prevent the tree from being a standard red-black tree, i.e., consecutive red nodes (nodes of weight zero) and weights greater than one. Thus, the balancing scheme must be targeted at removing these problems. It is an important feature of the design that the global constraint on a standard red-black tree involving the number of black nodes is

© 2005 by Chapman & Hall/CRC

10-22

Handbook of Data Structures and Applications

FIGURE 10.7: Update operations.

not lost after an update. Instead, the information is captured in the second requirement and as soon as all weight greater than one has been removed, the standard constraint holds again. The strategy for the design of balancing operations is the same as for the classical search trees. Problems are removed if this is possible, and otherwise, the problem is moved closer to the root, where all problems can be resolved. In Fig. 10.8, examples are shown of how consecutive red nodes and weight greater than one can be eliminated, and in Fig. 10.9, examples are given of how these problems may be moved closer to the root, in the case where they cannot be eliminated immediately.

FIGURE 10.8: Example operations eliminating balance problems.

FIGURE 10.9: Example operations moving balance problems closer to the root.

It is possible to show complexity results for relaxed trees which are similar to the ones which can be obtained in the classical case. A logarithmic bound on the number of balancing operations required to balance the tree in response to an update was established in [23]. Since balancing operations can be delayed any amount of time, the usual notion of n as the number of elements in the tree at the time of balancing after an update is not really meaningful, so the bound is logarithmic in N , which is the maximum number of elements in the tree since it was last in balance. In [22], amortized constant bounds were obtained and in [45], a version is presented which has fewer and smaller operations, but meets the same bounds. Also, restructuring of the tree is worst-case constant per update. Finally, [48] extends the set of operations with a group insertion, such that an entire search tree

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

10-23

can be inserted in between two consecutive keys in amortized time O(log m), where m is the size of the subtree. The amortized bounds as well as the worst case bounds are obtained using potential function techniques [74]. For group insertion, the results further depend on the fact that trees with low total potential can build [40], such that the inserted subtree does not increase the potential too dramatically.

10.8.2

AVL-Trees

The ﬁrst relaxed version of AVL-trees [1] is from [63]. Here, the standard balance constraint of requiring that the heights of any two subtrees diﬀer by at most one is relaxed by introducing a slack parameter, referred to as a tag value. The tag value, tu , of any node u must be an integer greater than or equal to −1, except that the tag value of a leaf must be greater than or equal to zero. The constraint that heights may diﬀer by at most one is then imposed on the relaxed height instead. The relaxed height rh(u) of a node u is deﬁned as tu , if u is a leaf rh(u) = max(rh(u.l), rh(u.r)) + 1 + tu , otherwise As for red-black trees, enough ﬂexibility is introduced by this deﬁnition that updates can be made without immediate rebalancing while leaving the tree in a well-deﬁned state. This can be done by adjusting tag values appropriately in the vicinity of the update location. A standard AVL-tree is the ideal state of a relaxed AVL-tree, which is obtained when all tag values are zero. Thus, a balancing scheme aiming at this is designed. In [44], it is shown that a scheme can be designed such that the complexities from the sequential case are met. Thus, only a logarithmic number of balancing operations must be carried out in response to an update before the tree is again in balance. As opposed to red-black trees, the amortized constant rebalancing result does not hold in full generality for AVL-trees, but only for the semi-dynamic case [58]. This result is matched in [46]. A diﬀerent AVL-based version was treated in [71]. Here, rotations are only performed if the subtrees are balanced. Thus, violations of the balance constraints must be dealt with bottom-up. This is a minimalistic approach to relaxed balance. When a rebalancing operation is carried out at a given node, the children do not violate the balance constraints. This limits the possible cases, and is asymptotically as eﬃcient as the structure described above [52, 53].

10.8.3

Multi-Way Trees

Multi-way trees are usually described either as (a, b)-trees or B-trees, which are treated in another chapter of this book. An (a, b)-tree [37, 57] consists of nodes with at least a and at most b children. Usually, it is required that a ≥ 2 to ensure logarithmic height, and in order to make the rebalancing scheme work, b must be at least 2a − 1. Searching and updating including rebalancing is O(log a n). If b ≥ 2a, then rebalancing becomes amortized O(1). The term B-trees [17] is often used synonymously, but sometimes refers to the variant where b = 2a − 1 or the variant where b = 2a. For (a, b)-trees, the standard balance constraints for requiring that the number of children of each node is between a and b and that every leaf is at the same depth are relaxed as follows. First, nodes are allowed to have fewer than a children. This makes it possible to perform a deletion without immediate rebalancing. Second, nodes are equipped with a tag value, which is a non-positive integer value, and leaves are only required to have the same

© 2005 by Chapman & Hall/CRC

10-24

Handbook of Data Structures and Applications

relaxed depth, which is the usual depth, except that all tag values encountered from the root to the node in question are added. With this relaxation, it becomes possible to perform an insertion locally and leave the tree in a well-deﬁned state. Relaxed multi-way trees were ﬁrst considered in [63], and complexity results matching the standard case were established in [50]. Variations with other properties can be found in [39]. Finally, a group insertion operation with a complexity of amortized O(loga m), where m is the size of the group, can be added while maintaining the already achieved complexities for the other operations [47, 49]. The amortized result is a little stronger than usual, where it is normally assumed that the initial structure is empty. Here, except for very small values of a and b, zero-potential trees of any size can be constructed such the amortized results starting from such a tree hold immediately [40].

10.8.4

Other Results

Even though there are signiﬁcant diﬀerences between the results outlined above, it is possible to establish a more general result giving the requirements for when a balanced search tree scheme can be modiﬁed to give a relaxed version with corresponding complexity properties [51]. The main requirements are that rebalancing operations in the standard scheme must be local constant-sized operations which are applied bottom-up, but in addition, balancing operation must also move the problems of imbalance towards the root. See [35] for an example of how these general ideas are expressed in the concrete setting of red-black trees. In [32], it is demonstrated how the ideas of relaxed balance can be combined with methods from search trees of near-optimal height, and [39] contains complexity results made speciﬁcally for the reformulation of red-black trees in terms of layers based on black height from [67]. Finally, performance results from experiments with relaxed structures can be found in [21, 36].

References [1] G. M. Adel’son-Vel’ski˘ı and E. M. Landis. An algorithm for the organisation of information. Doklady Akadamii Nauk SSSR, 146:263–266, 1962. In Russian. English translation in Soviet Math. Doklady, 3:1259–1263, 1962. [2] A. V. Aho, J. E. Hopcroft, and J. D. Ullman. Data Structures and Algorithms. Addison-Wesley, Reading, Massachusetts, 1983. [3] A. Andersson. Optimal bounds on the dictionary problem. In Proceeding of the Symposium on Optimal Algorithms, volume 401 of Lecture Notes in Computer Science, pages 106–114. Springer-Verlag, 1989. [4] A. Andersson. Eﬃcient Search Trees. PhD thesis, Department of Computer Science, Lund University, Sweden, 1990. [5] A. Andersson. Balanced search trees made simple. In Proceedings of the Third Workshop on Algorithms and Data Structures, volume 709 of Lecture Notes in Computer Science, pages 60–71. Springer-Verlag, 1993. [6] A. Andersson. A demonstration of balanced trees. Algorithm animation program (for macintosh) including user’s guide. Can be downloaded from author’s homepage, 1993. [7] A. Andersson. General balanced trees. Journal of Algorithms, 30:1–28, 1999. [8] A. Andersson, C. Icking, R. Klein, and T. Ottmann. Binary search trees of almost optimal height. Acta Informatica, 28:165–178, 1990. [9] A. Andersson and T. W. Lai. Fast updating of well-balanced trees. In Proceedings of

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

[10]

[11] [12] [13]

[14] [15] [16] [17] [18] [19] [20] [21]

[22]

[23] [24] [25] [26] [27] [28]

[29]

10-25

the Second Scandinavian Workshop on Algorithm Theory, volume 447 of Lecture Notes in Computer Science, pages 111–121. Springer-Verlag, 1990. A. Andersson and T. W. Lai. Comparison-eﬃcient and write-optimal searching and sorting. In Proceedings of the Second International Symposium on Algorithms, volume 557 of Lecture Notes in Computer Science, pages 273–282. Springer-Verlag, 1991. A. Andersson and S. Nilsson. An eﬃcient list implementation. In JavaOne Conference, 1999. Code can be found at Stefan Nilsson’s home page. Arne Andersson. A note on searching in a binary search tree. Software – Practice & Experience, 21(10):1125–1128, 1991. Arne A. Andersson and Mikkel Thorup. Tight(er) worst-case bounds on dynamic searching and priority queues. In Proceedings of the Thirty Second Annual ACM Symposium on Theory of Computing, pages 335–342. ACM Press, 2000. Lars Arge and Jeﬀrey Scott Vitter. Optimal external memory interval management. SIAM Journal on Computing, 32(6):1488–1508, 2003. R. Bayer. Binary B-trees for virtual memory. In Proceedings of the ACM SIGIFIDET Workshop on Data Description, Access and control, pages 219–235, 1971. R. Bayer. Symmetric binary B-trees: Data structure and maintenance algorithms. Acta Informatica, 1(4):290–306, 1972. R. Bayer and E. McCreight. Organization and maintenance of large ordered indexes. Acta Informatica, 1:173–189, 1972. Paul Beame and Faith E. Fich. Optimal bounds for the predecessor problem and related problems. Journal of Computer and System Sciences, 65(1):38–72, 2002. J. L. Bentley. Multidimensional binary search trees used for associative searching. Communications of the ACM, 18(9):509–517, 1975. N. Blum and K. Mehlhorn. On the average number of rebalancing operations in weight-balanced trees. Theoretical Computer Science, 11:303–320, 1980. Luc Boug´e, Joaquim Gabarr´ o, Xavier Messeguer, and Nicolas Schabanel. Concurrent rebalancing of AVL trees: A ﬁne-grained approach. In Proceedings of the Third Annual European Conference on Parallel Processing, volume 1300 of Lecture Notes in Computer Science, pages 421–429. Springer-Verlag, 1997. Joan Boyar, Rolf Fagerberg, and Kim S. Larsen. Amortization results for chromatic search trees, with an application to priority queues. Journal of Computer and System Sciences, 55(3):504–521, 1997. Joan F. Boyar and Kim S. Larsen. Eﬃcient rebalancing of chromatic search trees. Journal of Computer and System Sciences, 49(3):667–682, 1994. M. R. Brown. A storage scheme for height-balanced trees. Information Processing Letters, 7(5):231–232, 1978. M. R. Brown. Addendum to “A storage scheme for height-balanced trees”. Information Processing Letters, 8(3):154–156, 1979. H. Chang and S. S. Iynegar. Eﬃcient algorithms to globally balance a binary search tree. Communications of the ACM, 27(7):695–702, 1984. A. C. Day. Balancing a binary tree. Computer Journal, 19(4):360–361, 1976. P. F. Dietz, J. I. Seiferas, and J. Zhang. A tight lower bound for on-line monotonic list labeling. In Proceedings of the Fourth Scandinavian Workshop on Algorithm Theory, volume 824 of Lecture Notes in Computer Science, pages 131–142. SpringerVerlag, 1994. P. F. Dietz and J. Zhang. Lower bounds for monotonic list labeling. In Proceedings of the Second Scandinavian Workshop on Algorithm Theory, volume 447 of Lecture Notes in Computer Science, pages 173–180. Springer-Verlag, 1990.

© 2005 by Chapman & Hall/CRC

10-26

Handbook of Data Structures and Applications

[30] Rolf Fagerberg. Binary search trees: How low can you go? In Proceedings of the Fifth Scandinavian Workshop on Algorithm Theory, volume 1097 of Lecture Notes in Computer Science, pages 428–439. Springer-Verlag, 1996. [31] Rolf Fagerberg. The complexity of rebalancing a binary search tree. In Proceedings of Foundations of Software Technology and Theoretical Computer Science, volume 1738 of Lecture Notes in Computer Science, pages 72–83. Springer-Verlag, 1999. [32] Rolf Fagerberg, Rune E. Jensen, and Kim S. Larsen. Search trees with relaxed balance and near-optimal height. In Proceedings of the Seventh International Workshop on Algorithms and Data Structures, volume 2125 of Lecture Notes in Computer Science, pages 414–425. Springer-Verlag, 2001. [33] I Galperin and R. L. Rivest. Scapegoat trees. In Proceedings of The Fourth Annual ACM-SIAM Symposium on Discrete Algorithms, pages 165–174, 1993. [34] Leo J. Guibas and Robert Sedgewick. A dichromatic framework for balanced trees. In

[35]

[36]

[37] [38]

[39]

[40]

[41] [42] [43]

[44]

[45] [46] [47]

Proceedings of the 19th Annual IEEE Symposium on the Foundations of Computer Science, pages 8–21, 1978. S. Hanke, Th. Ottmann, and E. Soisalon-Soininen. Relaxed balanced red-black trees. In Proceedings of the 3rd Italian Conference on Algorithms and Complexity, volume 1203 of Lecture Notes in Computer Science, pages 193–204. Springer-Verlag, 1997. Sabina Hanke. The performance of concurrent red-black tree algorithms. In Proceedings of the 3rd International Workshop on Algorithm Engineering, volume 1668 of Lecture Notes in Computer Science, pages 286–300. Springer-Verlag, 1999. Scott Huddleston and Kurt Mehlhorn. A new data structure for representing sorted lists. Acta Informatica, 17:157–184, 1982. Alon Itai, Alan G. Konheim, and Michael Rodeh. A sparse table implementation of priority queues. In Proceedings of the 8th International Colloquium on Automata, Languages and Programming, volume 115 of Lecture Notes in Computer Science, pages 417–431. Springer-Verlag, 1981. Lars Jacobsen and Kim S. Larsen. Complexity of layered binary search trees with relaxed balance. In Proceedings of the Seventh Italian Conference on Theoretical Computer Science, volume 2202 of Lecture Notes in Computer Science, pages 269– 284. Springer-Verlag, 2001. Lars Jacobsen, Kim S. Larsen, and Morten N. Nielsen. On the existence and construction of non-extreme (a, b)-trees. Information Processing Letters, 84(2):69–73, 2002. J. L. W. Kessels. On-the-ﬂy optimization of data structures. Communications of the ACM, 26:895–901, 1983. T. Lai. Eﬃcient Maintenance of Binary Search Trees. PhD thesis, Department of Computer Science, University of Waterloo, Canada., 1990. T. Lai and D. Wood. Updating almost complete trees or one level makes all the diﬀerence. In Proceedings of the Seventh Annual Symposium on Theoretical Aspects of Computer Science, volume 415 of Lecture Notes in Computer Science, pages 188– 194. Springer-Verlag, 1990. Kim S. Larsen. AVL trees with relaxed balance. In Proceedings of the 8th International Parallel Processing Symposium, pages 888–893. IEEE Computer Society Press, 1994. Kim S. Larsen. Amortized constant relaxed rebalancing using standard rotations. Acta Informatica, 35(10):859–874, 1998. Kim S. Larsen. AVL trees with relaxed balance. Journal of Computer and System Sciences, 61(3):508–522, 2000. Kim S. Larsen. Relaxed multi-way trees with group updates. In Proceedings of

© 2005 by Chapman & Hall/CRC

Balanced Binary Search Trees

[48] [49] [50] [51] [52] [53]

[54] [55] [56] [57] [58] [59]

[60] [61] [62] [63]

[64]

[65] [66] [67] [68] [69]

10-27

the Twentieth ACM SIGACT-SIGMOD-SIGART Symposium on Principles of Database Systems, pages 93–101. ACM Press, 2001. Kim S. Larsen. Relaxed red-black trees with group updates. Acta Informatica, 38(8):565–586, 2002. Kim S. Larsen. Relaxed multi-way trees with group updates. Journal of Computer and System Sciences, 66(4):657–670, 2003. Kim S. Larsen and Rolf Fagerberg. Eﬃcient rebalancing of b-trees with relaxed balance. International Journal of Foundations of Computer Science, 7(2):169–186, 1996. Kim S. Larsen, Thomas Ottmann, and E. Soisalon-Soininen. Relaxed balance for search trees with local rebalancing. Acta Informatica, 37(10):743–763, 2001. Kim S. Larsen, E. Soisalon-Soininen, and Peter Widmayer. Relaxed balance using standard rotations. Algorithmica, 31(4):501–512, 2001. Kim S. Larsen, Eljas Soisalon-Soininen, and Peter Widmayer. Relaxed balance through standard rotations. In Proceedings of the Fifth International Workshop on Algorithms and Data Structures, volume 1272 of Lecture Notes in Computer Science, pages 450–461. Springer-Verlag, 1997. W. A. Martin and D. N. Ness. Optimizing binary trees grown with a sorting algorithm. Communications of the ACM, 15(2):88–93, 1972. H. A. Maurer, T. Ottmann, and H.-W. Six. Implementing dictionaries using binary trees of very small height. Information Processing Letters, 5:11–14, 1976. E. M. McCreight. Priority search trees. SIAM Journal on Computing, 14(2):257–276, 1985. Kurt Mehlhorn. Sorting and Searching, volume 1 of Data Structures and Algorithms. Springer-Verlag, 1986. Kurt Mehlhorn and Athanasios K. Tsakalidis. An amortized analysis of insertions into AVL-trees. SIAM Journal on Computing, 15(1):22–33, 1986. J. I. Munro. An implicit data structure for the dictionary problem that runs in polylog time. In Proceedings of the 25th Annual IEEE Symposium on the Foundations of Computer Science, pages 369–374, 1984. J. I. Munro. An implicit data structure supporting insertion, deletion and search in O(log2 n) time. Journal of Computer and System Sciences, 33:66–74, 1986. J. I. Munro and H. Suwanda. Implicit data structures for fast search and update. Journal of Computer and System Sciences, 21:236–250, 1980. J. Nievergelt and E. M. Reingold. Binary search trees of bounded balance. SIAM Journal on Computing, 2(1):33–43, 1973. O. Nurmi, E. Soisalon-Soininen, and D. Wood. Concurrency control in database structures with relaxed balance. In Proceedings of the 6th ACM Symposium on Principles of Database Systems, pages 170–176, 1987. Otto Nurmi and Eljas Soisalon-Soininen. Uncoupling updating and rebalancing in chromatic binary search trees. In Proceedings of the Tenth ACM SIGACT-SIGMODSIGART Symposium on Principles of Database Systems, pages 192–198, 1991. Otto Nurmi and Eljas Soisalon-Soininen. Chromatic binary search trees—a structure for concurrent rebalancing. Acta Informatica, 33(6):547–557, 1996. H. J. Olivie. A new class of balanced search trees: Half-balanced binary search trees. R. A. I. R. O. Informatique Theoretique, 16:51–71, 1982. Th. Ottmann and E. Soisalon-Soininen. Relaxed balancing made simple. Technical Report 71, Institut f¨ ur Informatik, Universit¨ at Freiburg, 1995. M. H. Overmars. The Design of Dynamic Data Structures, volume 156 of Lecture Notes in Computer Science. Springer-Verlag, 1983. Mark H. Overmars and Jan van Leeuwen. Dynamic multi-dimensional data structures

© 2005 by Chapman & Hall/CRC

10-28

Handbook of Data Structures and Applications

based on quad- and K -D trees. Acta Informatica, 17(3):267–285, 1982. [70] Daniel Dominic Sleator and Robert Endre Tarjan. Self-adjusting binary search trees. Journal of the ACM, 32(3):652–686, July 1985. [71] Eljas Soisalon-Soininen and Peter Widmayer. Relaxed balancing in search trees. In Advances in Algorithms, Languages, and Complexity, pages 267–283. Kluwer Academic Publishers, 1997. [72] Q. F. Stout and B. L. Warren. Tree rebalancing in optimal time and space. Communications of the ACM, 29(9):902–908, 1986. [73] R. E. Tarjan. Updating a balanced search tree in O(1) rotations. Information Processing Letters, 16:253–257, 1983. [74] Robert Endre Tarjan. Amortized computational complexity. SIAM Journal on Algebraic and Discrete Methods, 6(2):306–318, 1985. [75] Athanasios K. Tsakalidis. Rebalancing operations for deletions in AVL-trees. R.A.I.R.O. Informatique Th´eorique, 19(4):323–329, 1985. [76] J. van Leeuwen and M. H. Overmars. Stratiﬁed balanced search trees. Acta Informatica, 18:345–359, 1983. [77] M. A. Weiss. Data Structures and Algorithm Analysis. The Benjamin/Cummings Publishing Company, 1992. Several versions during the years since the ﬁrst version. [78] Dan E. Willard. A density control algorithm for doing insertions and deletions in a sequentially ordered ﬁle in good worst-case time. Information and Computation, 97(2):150–204, 1992.

© 2005 by Chapman & Hall/CRC

11 Finger Search Trees 11.1 11.2 11.3 11.4

Finger Searching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dynamic Finger Search Trees . . . . . . . . . . . . . . . . . . . . Level Linked (2,4)-Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . Randomized Finger Search Trees . . . . . . . . . . . . . . . . Treaps

11.5

Skip Lists

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11-6

Optimal Merging and Set Operations • Arbitrary Merging Order • List Splitting • Adaptive Merging and Sorting

Gerth Stølting Brodal University of Aarhus

11.1

•

11-1 11-2 11-3 11-4

Finger Searching

One of the most studied problems in computer science is the problem of maintaining a sorted sequence of elements to facilitate eﬃcient searches. The prominent solution to the problem is to organize the sorted sequence as a balanced search tree, enabling insertions, deletions and searches in logarithmic time. Many diﬀerent search trees have been developed and studied intensively in the literature. A discussion of balanced binary search trees can be found in Chapter 10. This chapter is devoted to ﬁnger search trees, which are search trees supporting ﬁngers, i.e., pointers to elements in the search trees and supporting eﬃcient updates and searches in the vicinity of the ﬁngers. If the sorted sequence is a static set of n elements then a simple and space eﬃcient representation is a sorted array. Searches can be performed by binary search using 1+log n comparisons (we throughout this chapter let log x to denote log2 max{2, x}). A ﬁnger search starting at a particular element of the array can be performed by an exponential search by inspecting elements at distance 2i − 1 from the ﬁnger for increasing i followed by a binary search in a range of 2log d − 1 elements, where d is the rank diﬀerence in the sequence between the ﬁnger and the search element. In Figure 11.1 is shown an exponential search for the element 42 starting at 5. In the example d = 20. An exponential search requires 3 4 5 6 8 9 13 14 17 19 20 22 23 24 27 29 30 32 34 37 40 41 42 43 45 46 48 51 53 54 57 59 60 61 63 65 finger

FIGURE 11.1: Exponential search for 42.

11-1

© 2005 by Chapman & Hall/CRC

11-2

Handbook of Data Structures and Applications

2 + 2log d comparisons. Bentley and Yao [5] gave a close to optimal static ﬁnger search algorithm which performs log∗ d−1 log(i) d + O(log∗ d) comparisons, where log(1) x = log x, log(i+1) x = log(log(i) x), i=1 ∗ and log x = min{i | log(i) x ≤ 1}.

11.2

Dynamic Finger Search Trees

A dynamic ﬁnger search data structure should in addition to ﬁnger searches also support the insertion and deletion of elements at a position given by a ﬁnger. This section is devoted to an overview of existing dynamic ﬁnger search data structures. Section 11.3 and Section 11.4 give details concerning how three constructions support eﬃcient ﬁnger searches: The level linked (2,4)-trees of Huddleston and Mehlhorn [26], the randomized skip lists of Pugh [36, 37] and the randomized binary search trees, treaps, of Seidel and Aragon [39]. Guibas et al. [21] introduced ﬁnger search trees as a variant of B-trees [4], supporting ﬁnger searches in O(log d) time and updates in O(1) time, assuming that only O(1) movable ﬁngers are maintained. Moving a ﬁnger d positions requires O(log d) time. This work was reﬁned by Huddleston and Mehlhorn [26]. Tsakalidis [42] presented a solution based on AVL-trees, and Kosaraju [29] presented a generalized solution. Tarjan and van Wyk [41] presented a solution based on red-black trees. The above ﬁnger search tree constructions either assume a ﬁxed constant number of ﬁngers or only support updates in amortized constant time. Constructions supporting an arbitrary number of ﬁngers and with worst case update have been developed. Levcopoulos and Overmars [30] presented a search tree that supported updates at an arbitrary position in worst case O(1) time, but only supports searches in O(log n) time. Constructions supporting O(log d) time searches and O(log∗ n) time insertions and deletions were developed by Harel [22, 23] and Fleischer [19]. Finger search trees with worst-case constant time insertions and O(log∗ n) time deletions were presented by Brodal [7], and a construction achieving optimal worst-case constant time insertions and deletions were presented by Brodal et al. [9]. Belloch et al. [6] developed a space eﬃcient alternative solution to the level linked (2,4)trees of Huddleston and Mehlhorn, see Section 11.3. Their solution allows a single ﬁnger, that can be moved by the same performance cost as (2,4)-trees. In the solution no level links and parent pointers are required, instead a special O(log n) space data structure, hand, is created for the ﬁnger that allows the ﬁnger to be moved eﬃciently. Sleator and Tarjan introduced splay trees as a class of self-adjusting binary search trees supporting searches, insertions and deletions in amortized O(log n) time [40]. That splay trees can be used as eﬃcient ﬁnger search trees was later proved by Cole [15, 16]: Given an O(n) initialization cost, the amortized cost of an access at distance d from the preceding access in a splay tree is O(log d) where accesses include searches, insertions, and deletions. Notice that the statement only applies in the presence of one ﬁnger, which always points to the last accessed element. All the above mentioned constructions can be implemented on a pointer machine where the only operation allowed on elements is the comparison of two elements. For the Random Access Machine model of computation (RAM), Dietz and Raman [17, 38] developed a ﬁnger search tree with constant update time and O(log d) search time. This result is achieve by tabulating small tree structures, but only performs the comparison of elements. In the same model of computation, Andersson and Thorup [2] have surpassed the logarithmic bound in the search procedure by achieving O

© 2005 by Chapman & Hall/CRC

log d log log d

query time. This result is achieved by

Finger Search Trees

11-3

considering elements as bit-patterns/machine words and applying techniques developed for the RAM to surpass lower bounds for comparison based data structures. A survey on RAM dictionaries can be found in Chapter 39.

11.3

Level Linked (2,4)-Trees

In this section we discuss how (2,4)-trees can support eﬃcient ﬁnger searches by the introduction of level links. The ideas discussed in this section also applies to the more general class of height-balanced trees denoted (a, b)-trees, for b ≥ 2a. A general discussion of height balanced search trees can be found in Chapter 10. A throughout treatment of level linked (a, b)-trees can be found in the work of Huddleston and Mehlhorn [26, 32]. A (2,4)-tree is a height-balanced search tree where all leaves have the same depth and all internal nodes have degree two, three or four. Elements are stored at the leaves, and internal nodes only store search keys to guide searches. Since each internal node has degree at least two, it follows that a (2,4)-tree has height O(log n) and supports searches in O(log n) time. An important property of (2,4)-trees is that insertions and deletions given by a ﬁnger take amortized O(1) time (this property is not shared by (2, 3)-trees, where there exist sequences of n insertions and deletions requiring Θ(n log n) time). Furthermore a (2,4)-tree with n leaves can be split into two trees of size n1 and n2 in amortized O(log min(n1 , n2 )) time. Similarly two (2,4)-trees of size n1 and n2 can be joined (concatenated) in amortized O(log min(n1 , n2 )) time. To support ﬁnger searches (2,4)-trees are augmented with level links, such that all nodes with equal depth are linked together in a double linked list. Figure 11.2 shows a (2,4)-tree augmented with level links. Note that all edges represent bidirected links. The additional level links are straightforward to maintain during insertions, deletions, splits and joins of (2,4)-trees. To perform a ﬁnger search from x to y we ﬁrst check whether y is to the left or right of x. Assume without loss of generality that y is to the right of x. We then traverse the path from x towards the root while examining the nodes v on the path and their right neighbors until it has been established that y is contained within the subtree rooted at v or v’s right neighbor. The upwards search is then terminated and at most two downwards searches for y is started at respectively v and/or v’s right neighbor. In Figure 11.2 the pointers followed during a ﬁnger search from J to T are depicted by thick lines.

P H

U Y

D F ABC A

B

C

L N

E D

E

G F

G

I JK H

I

J x

K

S

M L

M

O N

O

W

Q R P

Q

R

T S

T

Æ

V U

V

X W

X

Z Y

Z

Ø Æ

Ø

˚ A

y

FIGURE 11.2: Level linked (2,4)-trees.

The O(log d) search time follows from the observation that if we advance the upwards search to the parent of node v then y is to the right of the leftmost subtree of v s right

© 2005 by Chapman & Hall/CRC

11-4

Handbook of Data Structures and Applications

neighbor, i.e. d is at least exponential in the height reached so far. In Figure 11.2 we advance from the internal node labeled “L N” to the node labeled “H” because from “S” we know that y is to the right of the subtree rooted at the node “Q R”. The construction for level linked (2,4)-trees generalizes directly to level linked (a, b)-trees that can be used in external memory. By choosing a = 2b and b such that an internal node ﬁts in a block in external memory, we achieve external memory ﬁnger search trees supporting insertions and deletions in O(1) memory transfers, and ﬁnger searches with O(logb n) memory transfers.

11.4

Randomized Finger Search Trees

Two randomized alternatives to deterministic search trees are the randomized binary search trees, treaps, of Seidel and Aragon [39] and the skip lists of Pugh [36, 37]. Both treaps and skip lists are elegant data structures, where the randomization facilitates simple and eﬃcient update operations. In this section we describe how both treaps and skip lists can be used as eﬃcient ﬁnger search trees without altering the data structures. Both data structures support ﬁnger searches in expected O(log d) time, where the expectations are taken over the random choices made by the algorithm during the construction of the data structure. For a general introduction to randomized dictionary data structures see Chapter 13.

11.4.1

Treaps

A treap is a rooted binary tree where each node stores an element and where each element has an associated random priority. A treap satisﬁes that the elements are sorted with respect to an inorder traversal of tree, and that the priorities of the elements satisfy heap order, i.e., the priority stored at a node is always smaller than or equal to the priority stored at the parent node. Provided that the priorities are distinct, the shape of a treap is uniquely determined by its set of elements and the associated priorities. Figure 11.3 shows a treap storing the elements A,B,. . .,T and with random integer priorities between one and hundred. The most prominent properties of treaps are that they have expected O(log n) height, implying that they provide searches in expected O(log n) time. Insertions and deletions of elements can be performed in expected at most two rotations and expected O(1) time, provided that the position of insertion or deletion is known, i.e. insertions and deletions given by a ﬁnger take expected O(1) time [39]. The essential property of treaps enabling expected O(log d) ﬁnger searches is that for two elements x and y whose ranks diﬀer by d in the set stored, the expected length of the path between x and y in the treap is O(log d). To perform a ﬁnger search for y starting with a ﬁnger at x, we ideally start at x and traverse the ancestor path of x until we reach the least common ancestor of x and y, LCA(x, y), and start a downward tree search for y. If we can decide if a node is LCA(x, y), this will traverse exactly the path from x to y. Unfortunately, it is nontrivial to decide if a node is LCA(x, y). In [39] it is assumed that a treap is extended with additional pointers to facilitate ﬁnger searches in expected O(log d) time. Below an alternative solution is described not requiring any additional pointers than the standard left, right and parent pointers. Assume without loss of generality that we have a ﬁnger at x and have to perform a ﬁnger search for y ≥ x present in the tree. We start at x and start traversing the ancestor path of x. During this traversal we keep a pointer to the last visited node that can potentially

© 2005 by Chapman & Hall/CRC

Finger Search Trees

11-5

1111111111 00000 00000 00000 11111 00000 11111 00000 11111 00000 00 11111 11 00011111 111 00000 00 11 000 111 00000 0011 11 00011111 00000 11111 00 111 00001111 1111 0000 00 11 0000 1111 0000 1111 00 11 0000 0000 00 11 001111 11 00 1111 11 00 11 00 11 00 11 00 11 00 11 00 11 0011 11 00 111 00 00011 000 111 000 111 0011 11 00 0011 11 00 0011 0011 11 0011 00 00 11 00 11 00 0011 11 00 11 00 11 00 11 00 11 00 11 98 E

84

93

A

G

80

67

91

B

F

K

77

x

LCA(x, y)

87

74

T

I

D

32

13

11

C

H

J

73 S

50 O

46

31

M

P

y

33

38

26

L

N

R

2

Q

FIGURE 11.3: Performing ﬁnger searches on treaps.

be LCA(x, y). Whenever we visit a node v on the path from x to the root there are three cases: (1) v ≤ x, then x is in the right subtree of v and cannot be LCA(x, y); we advance to the parent of v. (2) x < v ≤ y, then x is in the left subtree of v and LCA(x, y) is either y or an ancestor of y; we reset = v and advance to the parent of v. (3) x < y < v, then LCA(x, y) is in the left subtree of v and equals . Unfortunately, after LCA(x, y) has been visited case (1) can happen ω(log d) times before the search is terminated at the root or by case (3). Seidel and Aragon [39] denote these extra nodes visited above LCA(x, y) the excess path of the search, and circumvent this problem by extending treaps with special pointers for this. To avoid visiting long excess paths we extend the above upward search with a concurrent downward search for y in the subtree rooted at the current candidate for LCA(x, y). In case (1) we always advance the tree search for y one level down, in case (2) we restart the search at the new , and in (3) we ﬁnalize the search. The concurrent search for y guarantees that the distance between LCA(x, y) and y in the tree is also an upper bound on the nodes visited on the excess path, i.e. we visit at most twice the number of nodes as is on the path between x and y, which is expected O(log d). It follows that treaps support ﬁnger searches in O(log d) time. In Figure 11.3 is shown the search for x = I, y = P , LCA(x, y) = K, the path from x to y is drawn with thick lines, and the excess path is drawn with dashed lines.

11.4.2

Skip Lists

A skip list is a randomized dictionary data structure, which can be considered to consists of expected O(log n) levels. The lowest level being a single linked list containing the elements in sorted order, and each succeeding level is a random sample of the elements of the previous level, where each element is included in the next level with a ﬁxed probability, e.g. 1/2. The

© 2005 by Chapman & Hall/CRC

11-6

Handbook of Data Structures and Applications

pointer representation of a skip is illustrated in Figure 11.4.

A

C B

6 7 8 D y

E

F

G

3 2 1 H

J I

NULL

4 5

M K

L

N

x

FIGURE 11.4: Performing ﬁnger searches on skip list.

The most prominent properties of skip lists are that they require expected linear space, consist of expected O(log n) levels, support searches in expected O(log n) time, and support insertions and deletions at a given position in expected O(1) time [36, 37]. Pugh in [36] elaborates on the various properties and extensions of skip lists, including pseudo-code for how skip lists support ﬁnger searches in expected O(log d) time. To facilitate backward ﬁnger searches, a ﬁnger to a node v is stored as an expected O(log n) space ﬁnger data structure that for each level i stores a pointer to the node to the left of v where the level i pointer either points to v or a node to the right of v. Moving a ﬁnger requires this list of pointers to be updated correspondingly. A backward ﬁnger search is performed by ﬁrst identifying the lowest node in the ﬁnger data structure that is to the left of the search key y, where the nodes in the ﬁnger data structure are considered in order of increasing levels. Thereafter the search proceeds downward from the identiﬁed node as in a standard skip list search. Figure 11.4 shows the situation where we have a ﬁnger to H, represented by the thick (solid or dashed) lines, and perform a ﬁnger search for the element D to the left of H. Dashed (thick and thin) lines are the pointers followed during the ﬁnger search. The numbering indicate the other in which the pointers are traversed. If the level links of a skip list are maintained as double-linked lists, then ﬁnger searches can be performed in expected O(log d) time by traversing the existing links, without having a separate O(log n) space ﬁnger data structure

11.5

Applications

Finger search trees have, e.g., been used in algorithms within computational geometry [3, 8, 20, 24, 28, 41] and string algorithms [10, 11]. In the rest of this chapter we give examples of the eﬃciency that can be obtained by applying ﬁnger search trees. These examples typically allow one to save a factor of O(log n) in the running time of algorithms compared to using standard balanced search trees supporting O(log n) time searches.

11.5.1

Optimal Merging and Set Operations

Consider the problem of merging two sorted sequences X and Y of length respectively n and m, where n ≤ m, into one sorted sequence of length n + m. The canonical solution is to repeatedly insert each x ∈ X in Y . This requires that Y is searchable and that there can be inserted new elements, i.e. a suitable representation of Y is a balanced search tree. This immediately implies an O(n log m) time bound for merging. In the following we discuss how ﬁnger search trees allow this bound to be improved to O(n log m n ).

© 2005 by Chapman & Hall/CRC

Finger Search Trees

11-7

Hwang and Lin [27] presented an algorithm for merging two sorted sequence using optimal O(n log m n ) comparisons, but did not discuss how to represent the sets. Brown and Tarjan [12] described how to achieve the same bound for merging two AVL trees [1]. Brown and Tarjan subsequently introduced level linked (2,3)-trees and described how to achieve the same merging bound for level linked (2,3)-trees [13]. Optimal merging of two sets also follows as an application of ﬁnger search trees [26]. Assume that the two sequences are represented as ﬁnger search trees, and that we repeatedly insert the n elements from the shorter sequence into the larger sequence using a ﬁnger that moves monotonically from left to right. If the ith insertion advances the ﬁnger di positions, we have that the total work of performing the n ﬁnger searches and insertions is n n O( i=1 log di ), where i=1 di ≤ m. By convexity of the logarithm the total work becomes m bounded by O(n log n ). Since sets can be represented as sorted the above merging algorithm gives sequences, immediately raise to optimal, i.e. O log n+m = O(n log m n ) time, algorithms for set n union, intersection, and diﬀerence operations [26]. For a survey of data structures for set representations see Chapter 33.

11.5.2

Arbitrary Merging Order

A classical O(n log n) time sorting algorithm is binary merge sort. The algorithm can be viewed as the merging process described by a balanced binary tree: Each leaf corresponds to an input element and each internal node corresponds to the merging of the two sorted sequences containing respectively the elements in the left and right subtree of the node. If the tree is balanced then each element participates in O(log n) merging steps, i.e. the O(n log n) sorting time follows. Many divide-and-conquer algorithms proceed as binary merge sort, in the sense that the work performed by the algorithm can be characterized by a treewise merging process. For some of these algorithms the tree determining the merges is unfortunately ﬁxed by the input instance, and the running time using linear merges becomes O(n · h), where h is the height of the tree. In the following we discuss how ﬁnger search trees allow us to achieve O(n log n) for unbalanced merging orders to. Consider an arbitrary binary tree T with n leaves, where each leaf stores an element. We allow T to be arbitrarily unbalanced and that elements are allowed to appear at the leaves in any arbitrary order. Associate to each node v of T the set Sv of elements stored at the leaves of the subtree rooted at v. If we for each node v of T compute Sv by merging the two sets of the children of v using ﬁnger search trees, cf. Section 11.5.1, then the total time to compute all the sets Sv is O(n log n). The proof of the total O(n log n) bound is by structural induction where we show that in a tree of size n, the total merging cost O(log(n!)) = O(n log n). Recall that two sets of is n1 +n2 time. By induction we get that the total size n1 and n2 can be merged in O log n1 merging in a subtree with a root with two children of size respectively n1 and n2 becomes:

n1 + n 2 log(n1 !) + log(n2 !) + log n1 = log(n1 !) + log(n2 !) + log((n1 + n2 )!) − log(n1 !) − log(n2 !) =

log((n1 + n2 )!) .

The above approach of arbitrary merging order was applied in [10, 11] to achieve O(n log n) time algorithms for ﬁnding repeats with gaps and quasiperiodicities in strings. In both these

© 2005 by Chapman & Hall/CRC

11-8

Handbook of Data Structures and Applications

algorithms T is determined by the suﬃx-tree of the input string, and the Sv sets denote the set of occurrences (positions) of the substring corresponding to the path label of v.

11.5.3

List Splitting

Hoﬀmann et al. [25] considered how ﬁnger search trees can be used for solving the following list splitting problem, that e.g. also is applied in [8, 28]. Assume we initially have a sorted list of n elements that is repeatedly split into two sequences until we end up with n sequences each containing one element. If the splitting of a list of length k into two lists of length k1 and k2 is performed by performing a simultaneous ﬁnger search from each end of the list, followed by a split, the searching and splitting can be performed in O(log min(k1 , k2 )) time. Here we assume that the splitting order is unknown in advance. By assigning a list of k elements a potential of k − log k ≥ 0, the splitting into two lists of size k1 and k2 releases the following amount of potential: (k − log k) − (k1 − log k1 ) − (k2 − log k2 ) = ≥

− log k + log min(k1 , k2 ) + log max(k1 , k2 ) −1 + log min(k1 , k2 ) ,

since max(k1 , k2 ) ≥ k/2. The released potential allows each list splitting to be performed in amortized O(1) time. The initial list is charged n − log n potential. We conclude that starting with a list of n elements, followed by a sequence of at most n − 1 splits requires total O(n) time.

11.5.4

Adaptive Merging and Sorting

The area of adaptive sorting addresses the problem of developing sorting algorithms which perform o(n log n) comparisons for inputs with a limited amount of disorder for various deﬁnitions of measures of disorder, e.g. the measure Inv counts the number of pairwise insertions in the input. For a survey of adaptive sorting algorithms see [18]. An adaptive sorting algorithm that is optimal with respect to the disorder measure Inv has running time O(n log Inv n ). A simple adaptive sorting algorithm optimal with respect to Inv is the insertion sort algorithm, where we insert the elements of the input sequence from left to right into a ﬁnger search tree. Insertions always start at a ﬁnger on the last element inserted. Details on applying ﬁnger search trees in insertion sort can be found in [13, 31, 32]. Another adaptive sorting algorithm based on applying ﬁnger search trees is obtained by replacing the linear merging in binary merge sort by an adaptive merging algorithm [14, 33– 35]. The classical binary merge sort algorithm alway performs Ω(n log n) comparisons, since in each merging step where two lists each of size k is merged the number of comparisons performed is between k and 2k − 1.

A1

A1

A2

B1

A2

A3

B2

A4

A3

A5

B3 A4

A6

B4

A5

B1 B2

B3

FIGURE 11.5: Adaptive merging.

© 2005 by Chapman & Hall/CRC

B5

B4

A6

B6

B5 B6

Finger Search Trees

11-9

The idea of the adaptive merging algorithm is to identify consecutive blocks from the input sequences which are also consecutive in the output sequence, as illustrated in Figure 11.5. This is done by repeatedly performing a ﬁnger search for the smallest element of the two input sequences in the other sequence and deleting the identiﬁed block in the other sequence by a split operation. If the blocks in the output sequence are denoted Z1 , . . . , Zk , it follows from the time bounds of ﬁnger search trees that the total time for this adaptive merging k operation becomes O( i=1 log |Zi |). From this merging bound it can be argued that merge sort with adaptive merging is adaptive with respect to the disorder measure Inv (and several other disorder measures). See [14, 33, 34] for further details.

Acknowledgment This work was supported by the Carlsberg Foundation (contract number ANS-0257/20), BRICS (Basic Research in Computer Science, www.brics.dk, funded by the Danish National Research Foundation), and the Future and Emerging Technologies programme of the EU under contract number IST-1999-14186 (ALCOM-FT).

References [1] G. M. Adel’son-Vel’skii and Y. M. Landis. An algorithm for the organization of information. Doklady Akademii Nauk SSSR, 146:263–266, 1962. English translation in Soviet Math. Dokl., 3:1259–1262. [2] A. Anderson and M. Thorup. Tight(er) worst case bounds on dynamic searching and priority queues. In Proc. 32nd Annual ACM Symposium On Theory of Computing, pages 335–342, 2000. [3] M. Atallah, M. Goodrich, and K.Ramaiyer. Biased ﬁnger trees and three-dimensional layers of maxima. In Proc. 10th ACM Symposium on Computational Geometry, pages 150–159, 1994. [4] R. Bayer and E. McCreight. Organization and maintenance of large ordered indexes. Acta Informatica, 1:173–189, 1972. [5] J. L. Bentley and A. C.-C. Yao. An almost optimal algorithm for unbounded searching. Information Processing Letters, 5(3):82–87, 1976. [6] G. E. Blelloch, B. M. Maggs, and S. L. M. Woo. Space-eﬃcient ﬁnger search on degree-balanced search trees. In Proceedings of the fourteenth annual ACM-SIAM symposium on Discrete algorithms, pages 374–383. Society for Industrial and Applied Mathematics, 2003. [7] G. S. Brodal. Finger search trees with constant insertion time. In Proc. 9th Annual ACM-SIAM Symposium on Discrete Algorithms, pages 540–549, 1998. [8] G. S. Brodal and R. Jacob. Dynamic planar convex hull. In Proc. 43rd Annual Symposium on Foundations of Computer Science, pages 617–626, 2002. [9] G. S. Brodal, G. Lagogiannis, C. Makris, A. Tsakalidis, and K. Tsichlas. Optimal ﬁnger search trees in the pointer machine. Journal of Computer and System Sciences, Special issue on STOC 2002, 67(2):381–418, 2003. [10] G. S. Brodal, R. B. Lyngsø, C. N. S. Pedersen, and J. Stoye. Finding maximal pairs with bounded gap. Journal of Discrete Algorithms, Special Issue of Matching Patterns, 1(1):77–104, 2000. [11] G. S. Brodal and C. N. S. Pedersen. Finding maximal quasiperiodicities in strings. In Proc. 11th Annual Symposium on Combinatorial Pattern Matching, volume 1848 of Lecture Notes in Computer Science, pages 397–411. Springer-Verlag, 2000.

© 2005 by Chapman & Hall/CRC

11-10

Handbook of Data Structures and Applications

[12] M. R. Brown and R. E. Tarjan. A fast merging algorithm. Journal of the ACM, 26(2):211–226, 1979. [13] M. R. Brown and R. E. Tarjan. Design and analysis of a data structure for representing sorted lists. SIAM Journal of Computing, 9:594–614, 1980. [14] S. Carlsson, C. Levcopoulos, and O. Petersson. Sublinear merging and natural mergesort. Algorithmica, 9(6):629–648, 1993. [15] R. Cole. On the dynamic ﬁnger conjecture for splay trees. part II: The proof. SIAM Journal of Computing, 30(1):44–85, 2000. [16] R. Cole, B. Mishra, J. Schmidt, and A. Siegel. On the dynamic ﬁnger conjecture for splay trees. part I: Splay sorting log n-block sequences. SIAM Journal of Computing, 30(1):1–43, 2000. [17] P. F. Dietz and R. Raman. A constant update time ﬁnger search tree. Information Processing Letters, 52:147–154, 1994. [18] V. Estivill-Castro and D. Wood. A survey of adaptive sorting algorithms. ACM Computing Surveys, 24:441–476, 1992. [19] R. Fleischer. A simple balanced search tree with O(1) worst-case update time. International Journal of Foundations of Computer Science, 7:137–149, 1996. [20] L. Guibas, J. Hershberger, D. Leven, M. Sharir, and R. Tarjan. Linear time algorithms for visibility and shortest path problems inside simple polygons. Algorithmica, 2:209– 233, 1987. [21] L. J. Guibas, E. M. McCreight, M. F. Plass, and J. R. Roberts. A new representation for linear lists. In Proc. 9th Ann. ACM Symp. on Theory of Computing, pages 49–60, 1977. [22] D. Harel. Fast updates of balanced search trees with a guaranteed time bound per update. Technical Report 154, University of California, Irvine, 1980. [23] D. Harel and G. S. Lueker. A data structure with movable ﬁngers and deletions. Technical Report 145, University of California, Irvine, 1979. [24] J. Hershberger. Finding the visibility graph of a simple polygon in time proportional to its size. In Proc. 3rd ACM Symposium on Computational Geometry, pages 11–20, 1987. [25] K. Hoﬀmann, K. Mehlhorn, P. Rosenstiehl, and R. E. Tarjan. Sorting Jordan sequences in linear time using level/linked search trees. Information and Control, 68(1-3):170– 184, 1986. [26] S. Huddleston and K. Mehlhorn. A new data structure for representing sorted lists. Acta Informatica, 17:157–184, 1982. [27] F. K. Hwang and S. Lin. A simple algorithm for merging two disjoint linearly ordered sets. SIAM Journal of Computing, 1(1):31–39, 1972. [28] R. Jacob. Dynamic Planar Convex Hull. PhD thesis, University of Aarhus, Denmark, 2002. [29] S. R. Kosaraju. Localized search in sorted lists. In Proc. 13th Ann. ACM Symp. on Theory of Computing, pages 62–69, 1981. [30] C. Levcopoulos and M. H. Overmars. A balanced search tree with O(1) worst-case update time. Acta Informatica, 26:269–277, 1988. [31] H. Mannila. Measures of presortedness and optimal sorting algorithms. IEEE Transactions on Computers, C-34:318–325, 1985. [32] K. Mehlhorn. Data Structures and Algorithms 1: Sorting and Searching. SpringerVerlag, 1984. [33] A. Moﬀat. Adaptive merging and a naturally natural merge sort. In Proceedings of the 14th Australian Computer Science Conference, pages 08.1–08.8, 1991. [34] A. Moﬀat, O. Petersson, and N. Wormald. Further analysis of an adaptive sorting

© 2005 by Chapman & Hall/CRC

Finger Search Trees

11-11

algorithm. In Proceedings of the 15th Australian Computer Science Conference, pages 603–613, 1992. [35] A. Moﬀat, O. Petersson, and N. C. Wormald. Sorting and/by merging ﬁnger trees. In Algorithms and Computation: Third International Symposium, ISAAC ’92, volume 650 of Lecture Notes in Computer Science, pages 499–508. Springer-Verlag, 1992. [36] W. Pugh. A skip list cookbook. Technical Report CS-TR-2286.1, Dept. of Computer Science, University of Maryland, College Park, 1989. [37] W. Pugh. Skip lists: A probabilistic alternative to balanced trees. Communications of the ACM, 33(6):668–676, 1990. [38] R. Raman. Eliminating Amortization: On Data Structures with Guaranteed Response Time. PhD thesis, University of Rochester, New York, 1992. Computer Science Dept., U. Rochester, tech report TR-439. [39] R. Seidel and C. R. Aragon. Randomized search trees. Algorithmica, 16(4/5):464–497, 1996. [40] D. D. Sleator and R. E. Tarjan. Self-adjusting binary search trees. Journal of the ACM, 32(3):652–686, 1985. [41] R. Tarjan and C. van Wyk. An o(n log log n) algorithm for triangulating a simple polygon. SIAM Journal of Computing, 17:143–178, 1988. [42] A. K. Tsakalidis. AVL-trees for localized search. Information and Control, 67(13):173–194, 1985.

© 2005 by Chapman & Hall/CRC

12 Splay Trees 12.1 12.2 12.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Splay Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12.4

Optimality of Splay Trees . . . . . . . . . . . . . . . . . . . . . . . . .

12-1 12-2 12-4

Access and Update Operations

12-7

Static Optimality • Static Finger Theorem • Working Set Theorem • Other Properties and Conjectures

12.5

Linking and Cutting Trees . . . . . . . . . . . . . . . . . . . . . . . . 12-10 Data Structure • Solid Trees • Rotation • Splicing • Splay in Virtual Tree • Analysis of Splay in Virtual Tree • Implementation of Primitives for Linking and Cutting Trees

12.6 12.7

Sanjeev Saxena Indian Institute of Technology, Kanpur

12.1

12.8 12.9

Case Study: Application to Network Flows . . . . 12-16 Implementation Without Linking and Cutting Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-19 FIFO: Dynamic Tree Implementation . . . . . . . . . . . 12-20 Variants of Splay Trees and Top-Down Splaying 12-23

Introduction

In this chapter we discuss following topics: 1. 2. 3. 4. 5.

Introduction to splay trees and their applications Splay Trees–description, analysis, algorithms and optimality of splay trees. Linking and Cutting Trees Case Study: Application to Network Flows Variants of Splay Trees.

There are various data structures like AVL-trees, red-black trees, 2-3-trees (Chapter 10) which support operations like insert, delete (including deleting the minimum item), search (or membership) in O(log n) time (for each operation). Splay trees, introduced by Sleator and Tarjan [13, 15] support all these operations in O(log n) amortized time, which roughly means that starting from an empty tree, a sequence of m of these operations will take O(m log n) time (deterministic), an individual operation may take either more time or less time (see Theorem 12.1). We discuss some applications in the rest of this section. Assume that we are searching for an item in a “large” sorted ﬁle, and if the item is in the kth position, then we can search the item in O(log k) time by exponential and binary search. Similarly, ﬁnger search trees (Chapter 11) can be used to search any item at distance f from a ﬁnger in O(log f ) time. Splay trees can search (again in amortized sense) an item

12-1

© 2005 by Chapman & Hall/CRC

12-2

Handbook of Data Structures and Applications

from any ﬁnger (which need not even be speciﬁed) in O(log f ) time, where f is the distance from the ﬁnger (see Section 12.4.2). Since the ﬁnger is not required to be speciﬁed, the time taken will be minimum over all possible ﬁngers (time, again in amortized sense). If we know the frequency or probability of access of each item, then we can construct an optimum binary search tree (Chapter 14) for these items; total time for all access will be the smallest for optimal binary search trees. If we do not know the probability (or access frequency), and if we use splay trees, even then the total time taken for all accesses will still be the same as that for a binary search tree, up to a multiplicative constant (see Section 12.4.1). In addition, splay trees can be used almost as a “black box” in linking and cutting trees (see Section 12.5). Here we need the ability to add (or subtract) a number to key values of all ancestors of a node x. Moreover, in practice, the re-balancing operations (rotations) are very much simpler than those in height balanced trees. Hence, in practice, we can also use splay trees as an alternative to height balanced trees (like AVL-trees, red-black trees, 2-3-trees), if we are interested only in the total time. However, some experimental studies [3] suggest, that for random data, splay trees outperform balanced binary trees only for highly skewed data; and for applications like “vocabulary accumulation” of English text [16], even standard binary search trees, which do not have good worst case performance, outperform both balanced binary trees (AVL trees) and splay trees. In any case, the constant factor and the algorithms are not simpler than those for the usual heap, hence it will not be practical to use splay trees for sorting (say as in heap sort), even though the resulting algorithm will take O(n log n) time for sorting, unless the data has some degree of pre-sortedness, in which case splay sort is a practical alternative [10]. Splay trees however, can not be used in real time applications. Splay trees can also be used for data compression. As splay trees are binary search trees, they can be used directly [4] with guaranteed worst case performance. They are also used in data compression with some modiﬁcations [9]. Routines for data compression can be shown to run in time proportional to the entropy of input sequence [7] for usual splay trees and their variants.

12.2

Splay Trees

Let us assume that for each node x, we store a real number key(x). In any binary search tree left subtree of any node x contains items having “key” values less than the value of key(x) and right subtree of the node x contains items with “key” values larger than the value of key(x). In splay trees, we ﬁrst search the query item, say x as in the usual binary search trees— compare the query item with the value in the root, if smaller then recursively search in the left subtree else if larger then, recursively search in the right subtree, and if it is equal then we are done. Then, informally speaking, we look at every disjoint pair of consecutive ancestors of x, say y =parent(x) and z =parent(y), and perform certain pair of rotations. As a result of these rotations, x comes in place of z. In case x has an odd number of proper ancestors, then the ancestor of x (which is child of the root), will also have to be dealt separately, in terminal case— we rotate the edge between x and the root. This step is called zig step (see Figure 12.1). If x and y are both left or are both right children of their respective parents, then we ﬁrst rotate the edge between y and its parent z and then the edge between x and its parent y. This step is called zig-zig step (see Figure 12.2). If x is a left (respectively right) child and y is a right (respectively left) child, then we

© 2005 by Chapman & Hall/CRC

Splay Trees

12-3 x

y

γ

y

x

α

γ

β

α

β

FIGURE 12.1: parent(x) is the root— edge xy is rotated (Zig case). y

z α

y β

x

z

x

α

x

γ

β

y δ α

γ

δ

z

γ β

δ

FIGURE 12.2: x and parent(x) are both right children (Zig-Zig case) —ﬁrst edge yz is rotated then edge xy. z

z δ

y α β

δ

x γ

y

x γ

α

x z

y α

β

γ

δ

β

FIGURE 12.3: x is a right child while parent(x) is a left child (Zig-Zag case)— ﬁrst edge xy is rotated then edge xz. ﬁrst rotate the edge between x and y and then between x and z, this step is called zig-zag step (see Figure 12.3). These rotations (together) not only make x the new root, but also, roughly speaking halve the depth (length of path to root) of all ancestors of x in the tree. If the node x is at depth “d”, splay(x) will take O(d) time, i.e., time proportional to access the item in node x. Formally, splay(x) is a sequence of rotations which are performed (as follows) until x becomes a root: • If parent(x) is root, then we carry out usual rotation, see Figure 12.1. • If x and parent(x) are both left (or are both right) children of their parents, then we ﬁrst rotate at y =parent(x) (i.e., the edge between y and its parent) and then rotate at x, see Figure 12.2. • If x is left (or respectively right) child but parent(x) is right (respectively left) child of its parent, then ﬁrst rotate at x and then again rotate at x, see Figure 12.3.

© 2005 by Chapman & Hall/CRC

12-4

12.3

Handbook of Data Structures and Applications

Analysis

We will next like to look at the “amortized” time taken by splay operations. Amortized time is the average time taken over a worst case sequence of operations. For the purpose of analysis, we give a positive weight w(x) to (any) item x in the tree. The weight function can be chosen completely arbitrarily (as long it is strictly positive). For analysis of splay trees we need some deﬁnitions (or nomenclature) and have to ﬁx some parameters. Weight of item x: For each item x, an arbitrary positive weight w(x) is associated (see Section 12.4 for some examples of function w(x)). Size of node x: Size(x) is the sum of the individual weights of all items in the subtree rooted at the node x. Rank of node x: Rank of a node x is log2 (size(x)). Potential of a tree: Let α be some positive constant (we will discuss choice of α later), then the potential of a tree T is taken to be α(Sum of rank(x) for all nodes x ∈ T ) = α x∈T rank(x). Amortized Time: As always, Amortized time = Actual Time + New Potential − Old Potential. Running Time of Splaying: Let β be some positive constant, choice of β is also discussed later but β ≤ α, then the running time for splaying is β×Number of rotations. If there are no rotations, then we charge one unit for splaying. We also need a simple result from algebra. Observe that 4xy = (x + y)2 − (x − y)2 . Now if x + y ≤ 1, then 4xy ≤ 1 − (x − y)2 ≤ 1 or taking logarithms1, log x + log y ≤ −2. Note that the maximum value occurs when x = y = 12 . FACT 12.1 [Result from Algebra] If x + y ≤ 1 then log x + log y ≤ −2. The maximum value occurs when x = y = 12 .

[Access Lemma] The amortized time to splay a tree (with root “t”) at a node “x” is at most

Size(t) 3α(rank(t) − rank(x)) + β = O log Size(x)

LEMMA 12.1

We will calculate the change in potential, and hence the amortized time taken in each of the three cases. Let s( ) denote the sizes before rotation(s) and s ( ) be the sizes after rotation(s). Let r( ) denote the ranks before rotation(s) and r ( ) be the ranks after rotation(s).

Proof

Case 1– x and parent(x) are both left (or both right) children

1 All

logarithms in this chapter are to base two.

© 2005 by Chapman & Hall/CRC

Splay Trees

12-5

Please refer to Figure 12.2. Here, s(x) + s (z) ≤ s (x), or by Fact 12.1, −2 ≥ log or

s(x) s (x)

(z) + ss (x) ≤ 1. Thus,

s (z) s(x) + log = r(x) + r (z) − 2r (x), s (x) s (x) r (z) ≤ 2r (x) − r(x) − 2.

Observe that two rotations are performed and only the ranks of x, y and z are changed. Further, as r (x) = r(z), the Amortized Time is = 2β + α((r (x) + r (y) + r (z)) − (r(x) + r(y) + r(z))) = 2β + α((r (y) + r (z)) − (r(x) + r(y))) ≤ 2β + α((r (y) + r (z)) − 2r(x)), (as r(y) ≥ r(x)). As r (x) ≥ r (y), amortized time ≤ 2β + α((r (x) + r (z)) − 2r(x)) ≤ 2β + α((r (x) + {2r (x) − r(x) − 2} − 2r(x))) ≤ 3α(r (x) − r(x)) − 2α + 2β ≤ 3α(r (x) − r(x)) (as α ≥ β). Case 2– x is a left child, parent(x) is a right child (y) (z) + ss (x) ≤ 1. Thus, by Please refer to Figure 12.3. s (y) + s (z) ≤ s (x), or ss (x) Fact 12.1, (y) (z) + log ss (x) = r (y) + r (z) − 2r (x), or, −2 ≥ log ss (x) r (y) + r (z) ≤ 2r (x) − 2. Now Amortized Time= 2β + α((r (x) + r (y) + r (z)) − (r(x) + r(y) + r(z))). But, as r (x) = r(z), Amortized time = 2β + α((r (y) + r (z)) − (r(x) + r(y))). Using r(y) ≥ r(x), Amortized time ≤ 2β + α((r (y) + r (z)) − 2r(x)) ≤ 2α(r (x) − r(x)) − 2α + 2β ≤ 3α(r (x) − r(x)) − 2(α − β) ≤ 3α(r (x) − r(x)) Case 3– parent(x) is a root Please refer to Figure 12.1. There is only one rotation, Amortized Time = β + α((r (x) + r (y)) − (r(x) + r(y))). But as, r (x) = r(y), Amortized time is β + α(r (y) − r(x)) ≤ β + α(r (x) − r(x)) ≤ β + 3α(r (x) − r(x)). As case 3, occurs only once, and other terms vanish by telescopic cancellation, the lemma follows. THEOREM 12.1

n) log n

Time for m accesses on a tree having at most n nodes is O (m +

Proof Let the weight of each node x be ﬁxed as 1/n. As there are n nodes in the entire tree, the total weight of all nodes in the tree is 1. If t is the root of the tree then, size(t) = 1 and as each node x has at least one node (x itself) present in the subtree rooted at x (when x is a leaf, exactly one node will be present), for any node x, size(x) ≥ (1/n). Thus, we have following bounds for the ranks— r(t) ≤ 0 and r(x) ≥ − log n.

© 2005 by Chapman & Hall/CRC

12-6

Handbook of Data Structures and Applications

Or, from Lemma 12.1, amortized time per splay is at most 1 + 3 log n. As maximum possible value of the potential is n log n, maximum possible potential drop is also O(n log n), the theorem follows. We will generalize the result of Theorem 12.1 in Section 12.4, where we will be choosing some other weight functions, to discuss other optimality properties of Splay trees.

12.3.1

Access and Update Operations

We are interested in performing following operations: 1. Access(x)— x is a key value which is to be searched. 2. Insert(x)— a node with key value x is to be inserted, if a node with this key value is not already present. 3. Delete(x)— node containing key value x is to be deleted. 4. Join(t1 , t2 )— t1 and t2 are two trees. We assume that all items in tree t1 have smaller key values than the key value of any item in the tree t2 . The two trees are to be combined or joined into a single tree as a result, the original trees t1 and t2 get “destroyed”. 5. Split(x, t)— the tree t is split into two trees (say) t1 and t2 (the original tree is “lost”). The tree t1 should contain all nodes having key values less than (or equal to) x and tree t2 should contain all nodes having key values strictly larger than x. We next discuss implementation of these operations, using a single primitive operation— splay. We will show that each of these operations, for splay trees can be implemented using O(1) time and with one or two “splay” operations. Access(x, t) Search the tree t for key value x, using the routines for searching in a “binary search tree” and splay at the last node— the node containing value x, in case the search is successful, or the parent of “failure” node in case the search is unsuccessful. Join(t1 , t2 ) Here we assume that all items in splay tree t1 have key values which are smaller than key values of items in splay tree t2 , and we are required to combine these two splay trees into a single splay tree. Access largest item in t1 , formally, by searching for “+∞”, i.e., a call to Access(+∞, t1 ). As a result the node containing the largest item (say r) will become the root of the tree t1 . Clearly, now the root r of the splay tree t1 will not have any right child. Make the root of the splay tree t2 the right child of r, the root of t1 , as a result, t2 will become the right sub-tree of the root r and r will be the root of the resulting tree. Split(x, t) We are required to split the tree t into two trees, t1 containing all items with key values less than (or equal to) x and t2 , containing items with key values greater than x. If we carry out Access(x, t), and if a node with key value x is present, then the node containing the value x will become the root. We then remove the link from node containing the value x to its right child (say node containing value y); the resulting tree with root, containing the value x, will be t1 , and the tree with root, containing the value y, will be the required tree t2 . And if the item with key value x is not present, then the search will end at a node

© 2005 by Chapman & Hall/CRC

Splay Trees

12-7

(say) containing key value z. Again, as a result of splay, the node with value z will become the root. If z > x, then t1 will be the left subtree of the root and the tree t2 will be obtained by removing the edge between the root and its left child. Otherwise, z < x, and t2 will be the right subtree of the root and t1 will be the resulting tree obtained by removing the edge between the root and its right child. Insert(x, t) We are required to insert a new node with key value x in a splay tree t. We can implement insert by searching for x, the key value of the item to be inserted in tree t using the usual routine for searching in a binary search tree. If the item containing the value x is already present, then we splay at the node containing x and return. Otherwise, assume that we reach a leaf (say) containing key y, y = x. Then if x < y, then add the new node containing value x as a left child of node containing value y, and if x > y, then the new node containing the value x is made the right child of the node containing the value y, in either case we splay at the new node (containing the value x) and return. Delete(x, t) We are required to delete the node containing the key value x from the splay tree t. We ﬁrst access the node containing the key value x in the tree t— Access(x, t). If there is a node in the tree containing the key value x, then that node becomes the root, otherwise, after the access the root will be containing a value diﬀerent from x and we return(−1)— value not found. If the root contains value x, then let t1 be the left subtree and t2 be the right subtree of the root. Clearly, all items in t1 will have key values less than x and all items in t2 will have key values greater than x. We delete the links from roots of t1 and t2 to their parents (the root of t, the node containing the value x). Then, we join these two subtrees — Join(t1 , t2 ) and return. Observe that in both “Access” and “Insert”, after searching, a splay is carried out. Clearly, the time for splay will dominate the time for searching. Moreover, except for splay, everything else in “Insert” can be easily done in O(1) time. Hence the time taken for “Access” and “Insert” will be of the same order as the time for a splay. Again, in “Join”, “Split” and “Delete”, the time for “Access” will dominate, and everything else in these operations can again be done in O(1) time, hence “Join”, “Split” and “Delete” can also be implemented in same order of time as for an “Access” operation, which we just saw is, in turn, of same order as the time for a splay. Thus, each of above operations will take same order of time as for a splay. Hence, from Theorem 12.1, we have THEOREM 12.2 Time for m update or access operations on a tree having at most n nodes is O (m + n) log n .

Observe that, at least in amortized sense, the time taken for ﬁrst m operations on a tree which never has more than n nodes is the same as the time taken for balanced binary search trees like AVL trees, 2-3 trees, etc.

12.4

Optimality of Splay Trees

If w(i) the weight of node i is independent of the number of descendants of node i, then the maximum value of size(i) will be W = w(i) and minimum value of size(i) will be w(i). As size of the root t, will be W , and hence rank log W , so by Lemma 12.1, the amortized

© 2005 by Chapman & Hall/CRC

12-8

Handbook of Data Structures and Applications Size(t) W W = O log Size(x) = O log w(x) . time to splay at a node “x” will be O log Size(x) Also observe that the maximum possible change in the rank (for just node i) will be log W − log w(i) = log(W/w(i)) or the total maximum change in all ranks (the potential of the tree, with α = 1) will be bounded by log(W/w(i)). w(i) log W ≤ n log n (the maximum occurs when all w(i) s Note that, as = 1, W w(i) W are equal to 1/n), hence maximum change in potential is always bounded by O(n log n). As a special case, in Theorem 12.1, we had ﬁxed w(i) = 1/n and as a result, the amortized time per operation is bounded by O(log n), or time for m operations become O((m + n) log n). We next ﬁx w(i)’s in some other cases.

12.4.1

Static Optimality

On any sequence of accesses, a splay tree is as eﬃcient as the optimum binary search tree, up to a constant multiplicative factor. This can be very easily shown. Let q(i) be the number of times the ith node is accessed, we assume that each item is accessed at least once, or q(i) ≥ 1. Let m = q(i) be the total number of times we access any item in the splay tree. Assign a weight of q(i)/m to item i. We call q(i)/m the access frequency of the ith item. Observe that the total (or maximum) weight is 1 and hence the rank of the root r(t) = 0. Thus q(i) q(x) r(t) − r(x) = 0 − r(x) = − log ≤ − log . m m i∈Tx

Hence, from Lemma 12.1, with α = β = 1, the amortized time per splay (say at node “x”) is at most 3α(r(t) − r(x)) + β = 1 + 3(− log(q(x)/m)) = 1 + 3 log(m/q(x)). of the ith item is As ith item is accessed q(i) times, amortized total time forall accesses m m O q(i) + q(i) log( q(i) ) , hence total amortized time will be O m + q(i) log( q(i) ) . More m over as the maximum value of potential of the tree is max{r(x)} ≤ log( q(i) ) = m m O log( q(i) ) , the total time will be O m + q(i) log( q(i) ) . THEOREM 12.3 Time for m update or access operations on an n-node tree is O m + m ) , where q(i) is the total number of times item i is accessed, here m = q(i). q(i) log( q(i) REMARK 12.1 The total time, for this analysis is the same as that for the (static) optimal binary search tree.

12.4.2

Static Finger Theorem

We ﬁrst need a result from mathematics. Observe that, in the interval k − 1 ≤ x ≤ k,

k 1 1 or x12 ≥ k12 . Hence, in this interval, we have, k12 ≤ k−1 dx x ≥ k x2 summing from k = 2 to

n n n 1 1 n, 2 k12 ≤ 1 dx = 1 − or < 2. k=1 k2 x2 n If f is an integer between 0 and n, then we assign a weight of 1/(|i − f | + 1)2 to item i. ∞ Then W ≤ 2 k=1 k12 < 4 = O(1). Consider a particular access pattern (i.e. a snapshot or history or a run). Let the sequence of accessed items be i1 , · · · , im , some ij ’s may occur

© 2005 by Chapman & Hall/CRC

Splay Trees

12-9

more than once. Then, by the discussion at the beginning of this section, amortized time for the jth access is O(log(|ij − f | + 1). Or the total amortized time for all access will be m O(m + j=1 log(|ij − f | + 1)). As weight of any item is at least 1/n2 , the maximum value of potential is n log n. Thus, total time is at most O(n log n + m + m j=1 log(|ij − f | + 1)). f can be chosen as any ﬁxed item (ﬁnger). Thus, this out-performs ﬁnger-search trees, if any ﬁxed point is used as a ﬁnger; but here the ﬁnger need not be speciﬁed.

REMARK 12.2

12.4.3

Working Set Theorem

Splay trees also have the working set property, i.e., if only t diﬀerent items are being repeatedly accessed, then the time for access is actually O(log t) instead of O(log n). In fact, if tj diﬀerent items were accessed since the last access of ij th item, then the amortized time for access of ij th item is only O(log(tj + 1)). This time, we number the accesses from 1 to m in the order in which they occur. Assign weights of 1, 1/4, 1/9, · · · , 1/n2 to items in the order of the ﬁrst access. Item accessed earliest gets the largest weight and those never accessed get the smallest weight. Total weight W = (1/k 2 ) < 2 = O(1). It is useful to think of item having weight 1/k 2 as being in the kth position in a (some abstract) queue. After an item is accessed, we will be putting it in front of the queue, i.e., making its weight 1 and “pushing back” items which were originally ahead of it, i.e., the weights of items having old weight 1/s2 (i.e., items in sth place in the queue) will have a new weight of 1/(s + 1)2 (i.e., they are now in place s + 1 instead of place s). The position in the queue, will actually be the position in the “move to front” heuristic. Less informally, we will be changing the weights of items after each access. If the weight of item ij during access j is 1/k 2 , then after access j, assign a weight 1 to item ij . And an item having weight 1/s2 , s < k gets weight changed to 1/(s + 1)2 . Eﬀectively, item ij has been placed at the head of queue (weight becomes 1/12 ); and weights have been permuted. The value of W , the sum of all weights remains unchanged. If tj items were accessed after last access of item ij , then the weight of item ij would have been 1/t2j , or the amortized time for jth access is O(log(tj + 1)). After the access, as a result of splay, the ij th item becomes the root, thus the new size of ij th item is the sum of all weights W — this remains unchanged even after changing weights. As weights of all other items, either remain the same or decrease (from 1/s2 to 1/(s + 1)2 ), size of all other items also decreases or remains unchanged due to permutation of weights. In other words, as a result of weight reassignment, size of non-root nodes can decrease and size of the root remains unchanged. Thus, weight reassignment can only decrease the potential, or amortized time for weight reassignment is either zero or negative. Hence, by discussions at the beginning of this section, total time for m accesses on a tree of size at most n is O(n log n+ log(tj + 1)) where tj is the number of diﬀerent items which were accessed since the last access of ij th item (or from start, if this is the ﬁrst access).

12.4.4

Other Properties and Conjectures

Splay trees are conjectured [13] to obey “Dynamic Optimality Conjecture” which roughly states that cost for any access pattern for splay trees is of the same order as that of the best possible algorithm. Thus, in amortized sense, the splay trees are the best possible dynamic binary search trees up to a constant multiplicative factor. This conjecture is still open.

© 2005 by Chapman & Hall/CRC

12-10

Handbook of Data Structures and Applications

However, dynamic ﬁnger conjecture for splay trees which says that access which are close to previous access are fast has been proved by Cole[5]. Dynamic ﬁnger theorem states that the amortized cost of an access at a distance d from the preceding access is O(log(d + 1)); there is however O(n) initialization cost. The accesses include searches, insertions and deletions (but the algorithm for deletions is diﬀerent)[5]. Splay trees also obey several other optimality properties (see e.g. [8]).

12.5

Linking and Cutting Trees

Tarjan [15] and Sleator and Tarjan [13] have shown that splay trees can be used to implement linking and cutting trees. We are given a collection of rooted trees. Each node will store a value, which can be any real number. These trees can “grow” by combining with another tree link and can shrink by losing an edge cut. Less informally, the trees are “dynamic” and grow or shrink by following operations (we assume that we are dealing with a forest of rooted trees). link If x is root of a tree, and y is any node, not in the tree rooted at x, then make y the parent of x. cut Cut or remove the edge between a non-root node x and its parent. Let us assume that we want to perform operations like • Add (or subtract) a value to all ancestors of a node. • Find the minimum value stored at ancestors of a query node x. More formally, following operations are to be supported: ﬁnd cost(v): return the value stored in the node v. ﬁnd root(v): return the root of the tree containing the node v. ﬁnd min(v): return the node having the minimum value, on the path from v till ﬁnd root(v), the root of the tree containing v. In case of ties, choose the node closest to the root. add cost(v, δ): Add a real number δ to the value stored in every node on the path from v to the root (i.e., till ﬁnd root(v)). ﬁnd size(v) ﬁnd the number of nodes in the tree containing the node v. link(v, w) Here v is a root of a tree. Make the tree rooted at v a child of node w. This operation does nothing if both vertices v and w are in the same tree, or v is not a root. cut(v) Delete the edge from node v to its parent, thus making v a root. This operation does nothing if v is a root.

12.5.1

Data Structure

For the given forest, we make some of the given edges “dashed” and the rest of them are kept solid. Each non-leaf node will have only one “solid” edge to one of its children. All other children will be connected by a dashed edge. To be more concrete, in any given tree, the right-most link (to its child) is kept solid, and all other links to its other children are made “dashed”. As a result, the tree will be decomposed into a collection of solid paths. The roots of solid paths will be connected to some other solid path by a dashed edge. A new data structure

© 2005 by Chapman & Hall/CRC

Splay Trees

12-11 A4

A1 B1

A6

J

A2

A2 D

B2

A7

I

E

G

A5

A3

A1

I

A3 B3

J

H

C1

C2

B3

A4 B4 A5 F

C3

C2

B5

C1

C4 H

B2 B1

B4

C3

A6

F

C4

G

B5

D

E

A7

(a)

(b)

FIGURE 12.4: (a) Original Tree (b) Virtual Trees: Solid and dashed children.

called a “virtual tree” is constructed. Each linking and cutting tree T is represented by a virtual tree V , containing the same set of nodes. But each solid path of the original tree is modiﬁed or converted into a binary tree in the virtual tree; binary trees are as balanced as possible. Thus, a virtual tree has a (solid) left child, a (solid) right child and zero or more (dashed) middle children. In other words, a virtual tree consists of a hierarchy of solid binary trees connected by dashed edges. Each node has a pointer to its parent, and to its left and right children (see Figure 12.4).

12.5.2

Solid Trees

Recall that each path is converted into a binary tree. Parent (say y) of a node (say x) in the path is the in-order (symmetric order) successor of that node (x) in the solid tree. However, if x is the last node (in symmetric order) in the solid sub-tree then its parent path will be the parent of the root of the solid sub-tree containing it (see Figure 12.4). Formally, Parentpath(v) =Node(Inorder(v) + 1). Note that for any node v, all nodes in the left sub-tree will have smaller inorder numbers and those in the right sub-tree will have larger inorder numbers. This ensures that all nodes in the left subtree are descendants and all nodes in the right sub-tree are ancestors. Thus, the parent (in the binary tree) of a left child will be an ancestor (in the original tree). But, parent (in the binary tree) of a right child is a descendant (in the original tree). This order, helps us to carry out add cost eﬀectively. We need some deﬁnitions or notation to proceed. Let mincost(x) be the cost of the node having the minimum key value among all descendants of x in the same solid sub-tree. Then in each node we store two ﬁelds δcost(x) and δmin(x). We deﬁne, δmin(x) =cost(x)−mincost(x). And,

© 2005 by Chapman & Hall/CRC

12-12

Handbook of Data Structures and Applications v

w a

dashed children of w

b

v

dashed children of v

w c

a

dashed children of v

dashed children of w

c

b

FIGURE 12.5: Rotation in Solid Trees— rotation of edge (v, w).

δcost(x) =

cost(x) − cost(parent(x)) cost(x)

if x has a solid parent otherwise (x is a solid tree root)

We will also store, size(x), the number of descendants (both solid and dashed) in virtual tree in incremental manner. size(parent(x)) − size(x) if x is not the root of a virtual tree δsize(x) = size(x) otherwise Thus, δsize(x) is number of descendants of parent(x), not counting the descendants of x. FACT 12.2

δmin(x) − δcost(x) =cost(parent(x))- mincost(x).

Thus, if u and v are solid children of node z, then mincost(z) = min{cost(z),mincost(v),mincost(w)}, or, δmin(z) =cost(z)−mincost(z) = max{0,cost(z)−mincost(v),cost(z)−mincost(w).} Using Fact 12.2, and the fact z =parent(u) =parent(v), we have FACT 12.3 If u and v are children of z, then δmin(z) = max{0, δmin(u) − δcost(u), δmin(v) − δcost(v)}.

For linking and cutting trees, we need two primitive operations— rotation and splicing.

12.5.3

Rotation

Let us discuss rotation ﬁrst (see Figure 12.5). Let w be the parent of v in the solid tree, then rotation of the solid edge (v, p(v)) ≡ (v, w) will make w = p(v) a child of v. Rotation does not have any eﬀect on the middle children. Let a be the left solid child of w and v be the right solid child of w. Let “non-primes” denote the values before the rotation and “primes” the values after the rotation of the solid edge (v, w). We next show that the new values δcost , δmin and δsize , can be calculated in terms of old known values. We assume that b is the left solid child of v and c is the right solid child of v. First we calculate the new δcost values in terms of old δcost values. From Figure 12.5, δcost (v) =cost(v)−cost(parent(v)) =cost(v)−cost(parent(w)) =cost(v)−cost(w)+cost(w)−cost(parent(w)) = δcost(v) + δcost(w).

© 2005 by Chapman & Hall/CRC

Splay Trees

12-13

δcost (w) =cost(w)−cost(v) = −δcost (v). δcost (b) =cost(b)−cost(w) =cost(b)-cost(v)+cost(v)−cost(w) = δcost(b) + δcost(v). Finally, δcost (a) = δcost(a) and δcost (c) = δcost(c). We next compute δmin values in terms of δmin and δcost. δmin (v) =cost(v)−mincost (v) =cost(v)−mincost(w) =cost(v)−cost(w)+cost(w)−mincost(w) = δcost(v) + δmin(w). δmin( ) of all nodes other than w will remain same, and for w, from Fact 12.3, we have, δmin (w) = max{0, δmin (a) − δcost (a), δmin (b) − δcost (b)} = max{0, δmin(a) − δcost(a), δmin(b) − δcost(b) − δcost(v)} We ﬁnally compute δsize in terms of δsize. δsize (w) =size (parent (w))−size (w) =size (v)−size (w) (see Figure 12.5) =size(v)−size(b) (see Figure 12.5) =δsize(b). If z is parent(w), then size(z) is unchanged. δsize (v) =size (parent(v))-size (v) =size(z)−size(v) =size(z)−size(w) as size (v) =size(w) =δsize(w). For all other nodes (except v and w), the number of descendants remains the same, hence, size (x) =size(x). Hence, for all x ∈ / {v, w}, size (x) =size(x) or size(parent(x))−δsize(x) =size (parent (x))−δsize (x) or δsize (x) = −size(parent(x))+δsize(x)+size (parent (x)). Observe that for any child x of v or w, size of parent changes. In particular, δsize (a) = −size(w) + δsize(a)+size (w) = −size (v) + δsize(a)+size (w) = −δsize (w) + δsize(a) = δsize(a) − δsize (w) = δsize(a) − δsize(b) δsize (c) = −size(v) + δsize(c)+size (v) =size(w)−size(v) + δsize(c) as size (v) =size(w) = δsize(v) + δsize(c). And ﬁnally, δsize (b) = −size(v) + δsize(b)+size (w) =size(w)−size(v) + δsize(b)+size (w)−size(w) =δsize(v) + δsize(b)+size (w)−size (v) =δsize(v) + δsize(b) − δsize (w) =δsize(v).

© 2005 by Chapman & Hall/CRC

12-14

12.5.4

Handbook of Data Structures and Applications

Splicing

Let us next look at the other operation, splicing. Let w be the root of a solid tree. And let v be a child of w connected by a dashed edge. If u is the left most child of w, then splicing at a dashed child v, of a solid root w, makes v the left child of w. Moreover the previous left-child u, now becomes a dashed child of w. Thus, informally speaking splicing makes a node the leftmost child of its parent (if the parent is root) and makes the previous leftmost child of parent as dashed. We next analyse the changes in “cost” and “size” of various nodes after splicing at a dashed child v of solid root w (whose leftmost child is u). As before, “non-primes” denote the values before the splice and “primes” the values after the splice. As v was a dashed child of its parent, it was a root earlier (in some solid tree). And as w is also a root, δcost (v) =cost(v)−cost(w) = δcost(v) − δcost(w). And as u is now the root of a solid tree, δcost (u) =cost(u) = δcost(u)+cost(w) = δcost(u) + δcost(w). Finally, δmin (w) = max{0, δmin(v) − δcost (v), δmin(right(w))-δcost(right(w))} All other values are clearly unaﬀected. As no rotation is performed, δsize( ) also remains unchanged, for all nodes.

12.5.5

Splay in Virtual Tree

In virtual tree, some edges are solid and some are dashed. Usual splaying is carried out only in the solid trees. To splay at a node x in the virtual tree, following method is used. The algorithm looks at the tree three times, once in each pass, and modiﬁes it. In ﬁrst pass, by splaying only in the solid trees, starting from the node x, the path from x to the root of the overall tree, becomes dashed. This path is made solid by splicing. A ﬁnal splay at node x will now make x the root of the tree. Less informally, the algorithm is as follows: Algorithm for Splay(x) Pass 1 Walk up the virtual tree, but splaying is done only within solid sub-tree. At the end of this pass, the path from x to root becomes dashed. Pass 2 Walk up from node x, splicing at each proper ancestor of x. After this step, the path from x to the root becomes solid. Moreover, the node x and all its children in the original tree (the one before pass 1) now become left children. Pass 3 Walk up from node x to the root, splaying in the normal fashion.

12.5.6

Analysis of Splay in Virtual Tree

Weight of each node in the tree is taken to be the same (say) 1. Size of a node is total number of descendants— both solid and dashed. And the rank of a node as before is rank(x) = log(size(x)). We choose α = 2, and hence the potential becomes, potential= 2 x rank(x). We still have to ﬁx β. Let us analyze the complexity of each pass. Pass 1 We ﬁx β = 1. Thus, from Lemma 12.1, the amortized cost of single splaying is at most 6(r(t) − r(x)) + 1. Hence, the total cost of all splays in this pass will be

© 2005 by Chapman & Hall/CRC

Splay Trees

12-15

≤ 6(r(t1 ) − r(x)) + 1 + 6(r(t2 ) − r(p(t1 )) + 1 + · · · + 6(r(tk ) − r(p(tk−1 ))) + 1 ≤ (6(r(t1 ) − r(x)) + +6(r(tk ) − r(p(tk−1 )))) + k. Here, k is number of solid trees in path from x to root. Or the total cost ≤ k + (6(r(root) − r(x))) − 6(r(p(tk−1 )) − r(tk−1 ) + · · · + r(p(t1 )) − r(t1 ))) Recall that the size includes those of virtual descendants, hence each term in the bracket is non-negative. Or the total cost ≤ k + 6(r(root) − r(x)) Note that the depth of node x at end of the ﬁrst pass will be k. Pass 2 As no rotations are performed, actual time is zero. Moreover as there are no rotations, there is no change in potential. Hence, amortized time is also zero. Alternatively, time taken to traverse k-virtual edges can be accounted by incorporating that in β in pass 3. REMARK 12.3

This means, that in eﬀect, this pass can be done together

with Pass 1. Pass 3 In pass 1, k extra rotations are performed, (there is a +k factor), thus, we can take this into account, by charging, 2 units for each of the k rotation in pass 3, hence we set β = 2. Clearly, the number of rotations, is exactly “k”. Cost will be 6 log n + 2. Thus, in eﬀect we can now neglect the +k term of pass 1. Thus, total cost for all three passes is 12 log n + 2.

12.5.7

Implementation of Primitives for Linking and Cutting Trees

We next show that various primitives for linking and cutting trees described in the beginning of this section can be implemented in terms of one or two calls to a single basic operation— “splay”. We will discuss implementation of each primitive, one by one. ﬁnd cost(v) We are required to ﬁnd the value stored in the node v. If we splay at node v, then node v becomes the root, and δcost(v) will give the required value. Thus, the implementation is splay(v) and return the value at node v ﬁnd root(v) We have to ﬁnd the root of the tree containing the node v. Again, if we splay at v, then v will become the tree root. The ancestors of v will be in the right subtree, hence we follow right pointers till root is reached. The implementation is: splay(v), follow right pointers till last node of solid tree, say w is reached, splay(w) and return(w). ﬁnd min(v) We have to ﬁnd the node having the minimum value, on the path from v till the root of the tree containing v; in case of ties, we have to choose the node closest to the root. We again splay at v to make v the root, but, this time, we also keep track of the node having the minimum value. As these values are stored in incremental manner, we have to compute the value by an “addition” at each step. splay(v), use δcost( ) and δmin( ) ﬁelds to walk down to the last minimum cost node after v, in the solid tree, say w, splay(w) and return(w).

© 2005 by Chapman & Hall/CRC

12-16

Handbook of Data Structures and Applications

add cost(v, δx) We have to add a real number δx to the values stored in each and every ancestors of node v. If we splay at node v, then v will become the root and all ancestors of v will be in the right subtree. Thus, if we add δx to δcost(v), then in eﬀect, we are adding this value not only to all ancestors (in right subtree) but also to the nodes in the left subtree. Hence, we subtract δx from δcost( ) value of left child of v. Implementation is: splay(v), add δx to δcost(v), subtract δx from δcost(LCHILD(v)) and return ﬁnd size(v) We have to ﬁnd the number of nodes in the tree containing the node v. If we splay at the node v, then v will become the root and by deﬁnition of δsize, δsize(v) will give the required number. splay(v) and return(δsize(v)). link(v, w) If v is a root of a tree, then we have to make the tree rooted at v a child of node w. Splay(w), and make v a middle (dashed) child of w. Update δsize(v) and δsize(w), etc. cut(v) If v, is not a root, then we have to delete the edge from node v to its parent, thus making v a root. The implementation of this is also obvious: splay(v), add δcost(v) to δcost(RCHILD(v)), and break link between RCHILD(v) and v. Update δmin(v), δsize(v) etc.

12.6

Case Study: Application to Network Flows

We next discuss application of linking and cutting trees to the problem of ﬁnding maximum ﬂow in a network. Input is a directed graph G = (V, E). There are two distinguished vertices s (source) and t (sink). We need a few deﬁnitions and some notations[1, 6]. Most of the results in this case-study are from[1, 6]. PreFlow g(∗, ∗) is a real valued function having following properties: Skew-Symmetry: g(u, v) = −g(v, u) Capacity Constraint: g(u, v) ≤ c(u, v) Positive-Flow Excess: e(v) ≡ nw=1 g(v, w) ≥ 0 for v = s n Flow-Excess Observe that ﬂow-excess at node v is e(v) = w=1 g(w, v) if v = s and ﬂow excess at source s is e(s) = ∞ Flow f (∗, ∗) is a real valued function having following additional property n Flow Conservation: / {s, t} w=1 f (v, w) = 0 for v ∈ Preﬂow: f is a preﬂow. n Value of ﬂow: |f | = w=1 f (s, w), the net ﬂow out of source. If (u, v) ∈ / E, then c(u, v) = c(v, u) = 0. Thus, f (u, v) ≤ c(u, v) = 0 and f (v, u) ≤ 0. By skew-symmetry, f (u, v) = 0

REMARK 12.4

Cut Cut (S, S) is a partition of vertex set, such that s ∈ S and t ∈ S

© 2005 by Chapman & Hall/CRC

Splay Trees

12-17

Vertices reachable from s

s

CUT

Vertices which can reach t

t

FIGURE 12.6: s − t Cut. Capacity of Cut c(S, S) =

v∈S,w∈S

c(v, w)

Pre-Flow across a Cut g(S, S) = v∈S,w∈S / g(v, w) Residual Capacity If g is a ﬂow or preﬂow, then the residual capacity of an edge (v, w) is rg (v, w) = c(v, w) − g(v, w). Residual Graph Gg contains same set of vertices as the original graph G, but only those edges for which residual capacity is positive; these are either the edges of the original graph or their reverse edges. Valid Labeling A valid labeling d( ) satisﬁes following properties: 1. d(t) = 0 2. d(v) > 0 if v = t 3. if (v, w) is an edge in residual graph then d(w) ≥ d(v) − 1. A trivial labeling is d(t) = 0 and d(v) = 1 if v = t. REMARK 12.5 As for each edge (v, w), d(v) ≤ d(w) + 1, dist(u, t) ≥ d(u). Thus, label of every vertex from which t is reachable, is at most n − 1.

Active Vertex A vertex v = s is said to be active if e(v) > 0. The initial preﬂow is taken to be g(s, v) = c(s, v) and g(u, v) = 0 if u = s. Flow across a Cut Please refer to Figure 12.6. Observe that ﬂow conservation is true for all vertices except s and t. In particular sum of ﬂow (total ﬂow) into vertices in set S − {s} (set shown between s and cut) is equal to |f | which must be the ﬂow going out of these vertices (into the cut). And this is the ﬂow into vertices (from cut) in set S − {t} (set after cut before t) which must be equal to the ﬂow out of these vertices into t. Thus, the ﬂow into t is |f | which is also the ﬂow through the cut. FACT 12.4

As, |f | = f (S, S) =

v∈S,w ∈S /

f (v, w) ≤

v∈S,w ∈S /

c(v, w) = c(S, S)

Thus, maximum value of ﬂow is less than minimum capacity of any cut. THEOREM 12.4

© 2005 by Chapman & Hall/CRC

[Max-Flow Min-Cut Theorem] max |f | = minimum cut

12-18

Handbook of Data Structures and Applications

Proof Consider a ﬂow f for which |f | is maximum. Delete all edges for which (f (u, v) == c(u, v)) to get the residual graph. Let S be the set of vertices reachable from s in the residual graph. Now, t ∈ / S, otherwise there is a path along which ﬂow can be increased, contradicting the assumption that ﬂow is maximum. Let S be set of vertices not reachable from s. S is not empty as t ∈ S. Thus, (S, S) is an s − t cut and as all edges (v, w) of cut have been f (v, w) for edges of cut. deleted, c(v, w) = |f | = v∈S,w∈S f (v, w) = / v∈S,w ∈S / c(v, w) = c(S, S)

Push(v, w) /* v is an active vertex and (v, w) an edge in residual graph with d(w) = d(v)−1 */ Try to move excess from v to w, subject to capacity constraints, i.e., send δ = min{e(v), rg (v, w)) units of ﬂow from v to w. /* g(v, w) = g(v, w) + δ; e(v) = e(v) − δ and e(w) = e(w) + δ; */ If δ = rg (v, w), then the push is said to be saturating.

Relabel(v) For v = s, the new distance label is d(v) = min{d(w) + 1|(v, w) is a residual edge }

Preﬂow-Push Algorithms Following are some of the properties of preﬂow-push algorithms: 1. If relabel v results in a new label, d(v) = d(w∗ ) + 1, then as initial labeling was valid, dold (v) ≤ dold (w∗ ) + 1. Thus labels can only increase. Moreover, the new labeling is clearly valid. 2. If push is saturating, edge (v, w) may get deleted from the graph and edge (w, v) will get added to the residual graph, as d(w) = d(v) − 1, d(v) = d(w) + 1 ≥ d(w) − 1, thus even after addition to the residual graph, conditions for labeling to be valid are satisﬁed. 3. As a result of initialization, each node adjacent to s gets a positive excess. Moreover all arcs out of s are saturated. In other words in residual graph there is no path from s to t. As distances can not decrease, there can never be a path from s to t. Thus, there will be no need to push ﬂow again out of s. 4. By deﬁnition of pre-ﬂow, ﬂow coming into a node is more than ﬂow going out. This ﬂow must come from source. Thus, all vertices with positive excess are reachable from s (in the original network). Thus, as s is initially the only node, at any stage of the algorithm, there is a path Pv to a vertex v (in the original network) along which pre-ﬂow has come from s to v. Thus, in the residual graph, there is reverse path from v to s. 5. Consider a vertex v from which there is a path till a vertex X. As we trace back this path from X, then distance label d( ) increases by at most one. Thus, d(v) can be at most dist(v, X) larger than d(X). That is d(v) ≤ d(X)+ dist(v, X) 6. As for vertices from which t is not reachable, s is reachable, d(v) ≤ d(s)+ dist(s, v) = n + (n − 1) = 2n − 1 (as d(s) = n).

© 2005 by Chapman & Hall/CRC

Splay Trees

12-19

Thus, maximum label of any node is 2n − 1. FACT 12.5 As label of t remains zero, and label of other vertices only increase, the number of Relabels, which result in change of labels is (n − 1)2 . In each relabel operation we may have to look at degree(v) vertices. As, each vertex can be relabeled at most O(n) times, time for relabels is O(n)×degree(v) = O(n) × degree(v) = O(n) × O(m) = O(nm) FACT 12.6 If a saturating push occurs from u to v, then d(u) = d(v) + 1 and edge (u, v) gets deleted, but edge (v, u) gets added. Edge (u, v) can be added again only if edge (v, u) gets saturated, i.e., dnow (v) = dnow (u) + 1 ≥ d(u) + 1 = d(v) + 2. Thus, the edge gets added only if label increases by 2. Thus, for each edge, number of times saturating push can occur is O(n). So the total number of saturating pushes is O(nm). REMARK 12.6 Increase in label of d(u) can make a reverse ﬂow along all arcs (x, u) possible, and not just (v, u); in fact there are at most degree(u) such arcs. Thus, number of saturating pushes are O(nm) and not O(n2 ).

Consider the point in time when the algorithm terminates, i.e., when pushes or relabels can no longer be applied. As excess at s is ∞, excess at s could not have been exhausted. The fact that push/relabels can not be applied means that there is no path from s to t. Thus, S g , the set of vertices from which t is reachable, and Sg , set of vertices from which s is reachable, form an s − t cut. FACT 12.7

Consider an edge (u, v) with u ∈ Sg and v ∈ S g . As t is reachable from v, there is no excess at v. Moreover, by deﬁnition of cut, the edge is not present in residual graph, or in other words, ﬂow in this edge is equal to capacity. By Theorem 12.4, the ﬂow is the maximum possible.

12.7

Implementation Without Linking and Cutting Trees

Each vertex will have a list of edges incident at it. It also has a pointer to current edge (candidate for pushing ﬂow out of that node). Each edge (u, v) will have three values associated with it c(u, v), c(v, u) and g(u, v).

Push/Relabel(v) Here we assume that v is an active vertex and (v, w) is current edge of v. If (d(w) == d(v) − 1)&& (rg (v, w) > 0 ) then send δ = min{e(v), rg (v, w)} units of ﬂow from v to w. Else if v has no next edge, make ﬁrst edge on edge list the current edge and Relabel(v): d(v) = min{d(w) + 1|(v, w) is a residual edge} /* this causes d(v) to increase by at least one */ Else make the next edge out of v, the current edge. Relabeling v, requires a single scan of v’s edge list. As each relabeling of v, causes d(v) to go up by one, the number of relabeling steps (for v) are at most O(n), each step takes O(degree(v)) time. Thus, total time for all relabellings will be:

© 2005 by Chapman & Hall/CRC

12-20

Handbook of Data Structures and Applications

O( ndegree(v)) = O(n degree) = O(n × 2m) = O(nm). Each non-saturating push clearly takes O(1) time, thus time for algorithm will be O(nm)+O(#non saturating pushes).

Discharge(v) Keep on applying Push/Relabel(v) until either 1. entire excess at v is pushed out, OR, 2. label(v) increases.

FIFO/Queue Initialize a queue “Queue” to contain s. Let v be the vertex in front of Queue. Discharge(v), if a push causes excess of a vertex w to become non-zero, add w to the rear of the Queue. Let phase 1, consist of discharge operations applied to vertices added to the queue by initialization of pre-ﬂow. Phase (i + 1) consists of discharge operations applied to vertices added to the queue during phase i. Let Φ = max{d(v)|v is active }, with maximum as zero, if there are no active vertices. If in a phase, no relabeling is done, then the excess of all vertices which were in the queue has been moved. If v is any vertex which was in the queue, then excess has been moved to a node w, with d(w) = d(v)− 1. Thus, max{d(w)|w has now become active} ≤ max{d(v)− 1|v was active } = Φ − 1. Thus, if in a phase, no relabeling is done, Φ decreases by at least one. Moreover, as number of relabeling steps are bounded by 2n2 , number of passes in which relabeling takes place is at most 2n2 . Only way in which Φ can increase is by relabeling. Since the maximum value of a label of any active vertex is n − 1, and as a label never decreases, the total of all increases in Φ is (n − 1)2 . As Φ decreases by at least one in a pass in which there is no relabeling, number of passes in which there is no relabeling is (n − 1)2 + 2n2 ≤ 3n2 . FACT 12.8

12.8

Number of passes in FIFO algorithm is O(n2 ).

FIFO: Dynamic Tree Implementation

Time for non-saturating push is reduced by performing a succession of pushes along a single path in one operation. After a non-saturating push, the edge continues to be admissible, and we know its residual capacity. [6] Initially each vertex is made into a one vertex node. Arc of dynamic trees are a subset of admissible arcs. Value of an arc is its admissible capacity (if (u,parent(u)) is an arc, value of arc will be stored at u). Each active vertex is a tree root. Vertices will be kept in a queue as in FIFO algorithm, but instead of discharge(v), TreePush(v), will be used. We will further ensure that tree size does not exceed k (k is a parameter to be chosen later). The Tree-Push procedure is as follows:

© 2005 by Chapman & Hall/CRC

Splay Trees

12-21

Tree-Push(v) /* v is active vertex and (v, w) is an admissible arc */ 1. /* link trees rooted at v and the tree containing w by making w the parent of v, if the tree size doesn’t exceed k */. if v is root and (ﬁnd size(v)+ﬁnd size(w))≤ k, then link v and w. Arc (v, w) gets the value equal to the residual capacity of edge (v, w) 2. if v is root but ﬁnd size(v)+ﬁnd size(w) > k, then push ﬂow from v to w. 3. if v is not a tree root, then send δ = min{e(v),ﬁnd cost(ﬁnd min(v))} units of ﬂow from v, by add cost(v, −δ) /* decrease residual capacity of all arcs */ and while v is not a root and ﬁnd cost(ﬁnd min(v))== 0 do { z := ﬁnd min(v); cut(z); /* delete saturated edge */ f (z,parent(z)) := c(z,parent(z)); /* in saturated edge, ﬂow=capacity */ f (parent(z), z) := −c(z,parent(z)); } 4. But, if arc(v, w) is not admissible, replace (v, w), as current edge by next edge on v’s list. If v has no next-edge, then make the ﬁrst edge, the current edge and cut-oﬀ all children of v, and relabel(v). Analysis 1. Total time for relabeling is O(nm). 2. Only admissible edges are present in the tree, and hence if an edge (u, v) is cut in step (3) or in step (4) then it must be admissible, i.e., d(u) = d(v) + 1. Edge (v, u) can become admissible and get cut, iﬀ, dthen (v) = dthen (u) + 1 ≥ d(u) + 1 = d(v) + 2. Thus, the edge gets cut again only if label increases by 2. Thus, for each edge, number of times it can get cut is O(n). So total number of cuts are O(nm). 3. As initially, there are at most n-single node trees, number of links are at most n+#no of cuts= n + O(nm) = O(nm). Moreover, there is at most one tree operation for each relabeling, cut or link. Further, for each item in queue, one operation is performed. Thus, LEMMA 12.2 The time taken by the algorithm is O(log k × (nm + #No of times an item is added to the queue))

Root-Nodes Let Tv denote the tree containing node v. Let r be a tree root whose excess has become positive. It can become positive either due to: 1. push from a non-root vertex w in Step 3 of the tree-push algorithm. 2. push from a root w in Step 2 /* ﬁnd size(w)+ﬁnd size(r) > k */ Push in Step 3 is accompanied by a cut (unless ﬁrst push is nonsaturating). As the number of cuts is O(nm), number of times Step 3 (when ﬁrst push is saturating) can occur is O(nm). Thus, we need to consider only the times when ﬁrst push was non-saturating, and the excess has moved to the root as far as push in Step 3 is concerned. REMARK 12.7

© 2005 by Chapman & Hall/CRC

12-22

Handbook of Data Structures and Applications

In either case let i be the pass in which this happens (i.e., w was added to the queue in pass (i − 1)). Let I be the interval from beginning of pass (i − 1) to the time when e(r) becomes positive. Case 1: (Tw changes during I) Tw can change either due to link or cut. But number of times a link or a cut can occur is O(nm). Thus, this case occurs at most O(nm) time. Thus, we may assume that Tw does not change during interval I. Vertex w is added to the queue either because of relabeling of w, or because of a push in Step 2 from (say) a root v to w. Case 2: (w is added because of relabeling) Number of relabeling steps are O(n2 ). Thus number of times this case occurs is O(n2 ). Thus, we may assume that w was added to queue because of push from root v to w in Step 2. Case 3: (push from w was saturating) As the number of saturating pushes is O(nm), this case occurs O(nm) times. Thus we may assume that push from w was non-saturating. Case 4: (edge (v, w) was not the current edge at beginning of pass (i − 1)). Edge (v, w) will become the current edge, only because either the previous current edge (v, x) got saturated, or because of relabel(v), or relabel(x). Note, that if entire excess out of v was moved, then (v, w) will remain the current edge. As number of saturating pushes are O(nm) and number of relabeling are O(n2 ), this case can occur at most O(nm) times. Thus, we may assume that (v, w) was the current edge at beginning of pass (i − 1). Case 5: (Tv changes during interval I) Tv can change either due to link or cut. But the number of times a link or a cut can occur is O(nm). Thus, this case occurs at most O(nm) time. Thus, we may assume that Tv has not changed during interval I. Remaining Case: Vertex w was added to the queue because of a non-saturating push from v to w in Step 2 and (v, w) is still the current edge of v. Moreover, Tv and Tw do not change during the interval I. A tree at beginning of pass (i − 1) can participate in only one pair (Tw , Tv ) as Tw , because this push was responsible for adding w to the queue. Observe that vertex w is uniquely determined by r. And, a tree at beginning of pass (i − 1) can participate in only one pair (Tw , Tv ) as Tv , because (v, w) was the current edge out of root v, at beginning of pass (i − 1) (and is still the current edge). Thus, choice of Tv will uniquely determine Tw (and conversely). Thus, as a tree Tx can participate once in a pair as Tv , and once as Tw , and the two trees are unchanged, we have (v,w) |Tv | + |Tw | ≤ 2n (a vertex is in at most one tree). As push from v to w was in Step 2, ﬁnd size(v)+ﬁnd size(w) > k, or |Tv | + |Tw | > k. Thus, the number of such pairs is at most 2n/k. But from Fact 12.8, as there are at most O(n2 ) passes, the number of such pairs are O(n3 /k). Non-Root-Nodes Let us count the number of times a non-root can have its excess made positive. Its excess can only be made positive as a result of push in Step 2. As the number of saturating pushes is O(nm), clearly, O(nm) pushes in Step 2 are saturating. If the push is non-saturating, then entire excess at that node is moved out, hence it can happen only once after a vertex is removed from Queue. If v was not a root when it was added to the queue, then it has now become a root only because of a cut. But number of cuts is O(nm). Thus, we only need to consider the case when v was a root when it was

© 2005 by Chapman & Hall/CRC

Splay Trees

12-23

added to the queue. The root was not earlier in queue, because either its excess was then zero, or because its distance label was low. Thus, now either 1. distance label has gone up— this can happen at most O(n2 ) times, or 2. now its excess has become positive. This by previous case can happen at most O(nm + (n3 /k)) times. Summary If k is chosen such that nm = n3 /k, or k = n2 /m, time taken by the algorithm is O(nm log(n2 /m)).

12.9

Variants of Splay Trees and Top-Down Splaying

Various variants, modiﬁcations and generalization of Splay trees have been studied, see for example [2, 11, 12, 14]. Two of the most popular “variants” suggested by Sleator and Tarjan [13] are “semi-splay” and “simple-splay” trees. In simple splaying the second rotation in the “zig-zag” case is done away with (i.e., we stop at the middle ﬁgure in Figure 12.3). Simple splaying can be shown to have a larger constant factor both theoretically [13] and experimentally [11]. In semi-splay [13], in the zig-zig case (see Figure 12.2) we do only the ﬁrst rotation (i.e., stop at the middle ﬁgure) and continue splaying from node y instead of x. Sleator and Tarjan observe that for some access sequences “semi-splaying” may be better but for some others the usual splay is better. “Top-down” splay trees [13] are another way of implementing splay trees. Both the trees coincide if the node being searched is at an even depth [11], but if the item being searched is at an odd depth, then the top-down and bottom-up trees may diﬀer ([11, Theorem 2]). Some experimental evidence suggests [3] that top-down splay trees [11, 13] are faster in practice as compared to the normal splay trees, but some evidence suggests otherwise [16]. In splay trees as described, we ﬁrst search for an item, and then restructure the tree. These are called “bottom-up” splay trees. In “top-down” splay trees, we look at two nodes at a time, while searching for the item, and also keep restructuring the tree until the item we are looking for has been located. Basically, the current tree is divided into three trees, while we move down two nodes at a time searching for the query item left tree: Left tree consists of items known to be smaller than the item we are searching. right tree: Similarly, the right tree consists of items known to be larger than the item we are searching. middle tree: this is the subtree of the original tree rooted at the current node. Basically, the links on the access path are broken and the node(s) which we just saw are joined to the bottom right (respectively left) of the left (respectively right) tree if they contain item greater (respectively smaller) than the item being searched. If both nodes are left children or if both are right children, then we make a rotation before breaking the link. Finally, the item at which the search ends is the only item in the middle tree and it is made the root. And roots of left and right trees are made the left and right children of the root.

Acknowledgment I wish to thank N. Nataraju, Priyesh Narayanan, C. G. Kiran Babu S. and Lalitha S. for careful reading of a previous draft and their helpful comments.

© 2005 by Chapman & Hall/CRC

12-24

Handbook of Data Structures and Applications

References [1] Ravindra K. Ahuja, Thomas L. Magnanti and James B. Orlin, Network Flows (Theory, Algorithms and Applications), Prentice Hall, Inc, Englewood Cliﬀs, NJ, USA, 1993. [2] S. Albers and M. Karpinkski, Randomized splay trees: Theoretical and experimental results, Infor. Proc. Lett., vol 81, 2002, pp 213-221. [3] J. Bell and G. Gupta, An Evaluation of Self-adjusting Binary Search Tree Techniques, Software-Practice and Experience, vol 23, 1993, 369-382. [4] T. Bell and D. Kulp, Longest-match String Searching for Ziv-Lempel Compression, Software-Practice and Experience, vol 23, 1993, 757-771. [5] R.Cole, On the dynamic ﬁnger conjecture for splay trees. Part II: The Proof, SIAM J. Comput., vol 30, no. 1, 2000, pp 44-5. [6] A.V.Goldberg and R.E.Tarjan, “A New Approach to the Maximum-Flow Problem, JACM, vol 35, no. 4, October 1988, pp 921-940. [7] D. Grinberg, S. Rajagopalan, R. Venkatesh and V. K. Wei, Splay Trees for Data Compression, SODA, 1995, 522-530 [8] J. Iacono, Key Independent Optimality, ISAAC 2002, LNCS 2518, 2002, pp 25-31. [9] D. W. Jones, Application of Splay Trees to data compression, CACM, vol 31, 1988, 996-1007. [10] A. Moﬀat, G.Eddy and O.Petersson, Splaysort: Fast, Versatile, Practical, SoftwarePractice and Experience, vol 26, 1996, 781-797. [11] E. M¨ akinen, On top-down splaying, BIT, vol 27, 1987, 330-339. [12] M.Sherk, Self-Adjusting k-ary search trees, J. Algorithms, vol 19, 1995, pp 25-44. [13] D. Sleator and R. E. Tarjan, Self-Adjusting Binary Search Trees, JACM, vol 32, 1985 [14] A. Subramanian, An explanation of splaying, J. Algorithms, vol 20, 1996, pp 512-525. [15] R. E. Tarjan, Data Structures and Network Algorithms, SIAM 1983. [16] H. E. Williams, J. Zobel and S. Heinz, Self-adjusting trees in practice for large text collections, Software-Practice and Experience, vol 31, 2001, 925-939.

© 2005 by Chapman & Hall/CRC

13 Randomized Dictionary Structures 13.1 13.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preliminaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13-1 13-3

Randomized Algorithms • Basics of Probability Theory • Conditional Probability • Some Basic Distributions • Tail Estimates

13.3 13.4

Skip Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-10 Structural Properties of Skip Lists . . . . . . . . . . . . . . 13-12 Number of Levels in Skip List

13.5 13.6 13.7

Insertion in RBST

C. Pandu Rangan Indian Institute of Technology, Madras

13.1

13.8

•

Space Complexity

Dictionary Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13 Analysis of Dictionary Operations . . . . . . . . . . . . . . . 13-14 Randomized Binary Search Trees . . . . . . . . . . . . . . . . 13-17 •

Deletion in RBST

Bibliographic Remarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-21

Introduction

In the last couple of decades, there has been a tremendous growth in using randomness as a powerful source of computation. Incorporating randomness in computation often results in a much simpler and more easily implementable algorithms. A number of problem domains, ranging from sorting to stringology, from graph theory to computational geometry, from parallel processing system to ubiquitous internet, have beneﬁted from randomization in terms of newer and elegant algorithms. In this chapter we shall see how randomness can be used as a powerful tool for designing simple and eﬃcient data structures. Solving a real-life problem often involves manipulating complex data objects by variety of operations. We use abstraction to arrive at a mathematical model that represents the real-life objects and convert the real-life problem into a computational problem working on the mathematical entities speciﬁed by the model. Speciﬁcally, we deﬁne Abstract Data Type (ADT) as a mathematical model together with a set of operations deﬁned on the entities of the model. Thus, an algorithm for a computational problem will be expressed in terms of the steps involving the corresponding ADT operations. In order to arrive at a computer based implementation of the algorithm, we need to proceed further taking a closer look at the possibilities of implementing the ADTs. As programming languages support only a very small number of built-in types, any ADT that is not a built-in type must be represented in terms of the elements from built-in type and this is where the data structure plays a critical role. One major goal in the design of data structure is to render the operations of the ADT as eﬃcient as possible. Traditionally, data structures were designed to minimize the worst-case costs of the ADT operations. When the worst-case eﬃcient data structures turn out to be too complex and cumbersome to implement, we naturally explore alternative

13-1

© 2005 by Chapman & Hall/CRC

13-2

Handbook of Data Structures and Applications

design goals. In one of such design goals, we seek to minimize the total cost of a sequence of operations as opposed to the cost of individual operations. Such data structures are said to be designed for minimizing the amortized costs of operations. Randomization provides yet another avenue for exploration. Here, the goal will be to limit the expected costs of operations and ensure that costs do not exceed certain threshold limits with overwhelming probability. In this chapter we discuss about the Dictionary ADT which deals with sets whose elements are drawn from a ﬁxed universe U and supports operations such as insert, delete and search. Formally, we assume a linearly ordered universal set U and for the sake of concreteness we assume U to be the set of all integers. At any time of computation, the Dictionary deals only with a ﬁnite subset of U . We shall further make a simplifying assumption that we deal only with sets with distinct values. That is, we never handle a multiset in our structure, though, with minor modiﬁcations, our structures can be adjusted to handle multisets containing multiple copies of some elements. With these remarks, we are ready for the speciﬁcation of the Dictionary ADT. [Dictionary ADT] Let U be a linearly ordered universal set and S denote a ﬁnite subset of U . The Dictionary ADT, deﬁned on the class of ﬁnite subsets of U , supports the following operations. Insert (x, S) : For an x ∈ U, S ⊂ U , generate the set S {x}. Delete (x, S) : For an x ∈ U, S ⊂ U , generate the set S − {x}. Search (x, S) : For an x ∈ U, S ⊂ U , return TRUE if x ∈ S and return FALSE if x ∈ S.

DEFINITION 13.1

Remark : When the universal set is evident in a context, we will not explicitly mention it in the discussions. Notice that we work with sets and not multisets. Thus, Insert (x,S) does not produce new set when x is in the set already. Similarly Delete (x, S) does not produce a new set when x ∈ S. Due to its fundamental importance in a host of applications ranging from compiler design to data bases, extensive studies have been done in the design of data structures for dictionaries. Refer to Chapters 3 and 10 for data structures for dictionaries designed with the worst-case costs in mind, and Chapter 12 of this handbook for a data structure designed with amortized cost in mind. In Chapter 15 of this book, you will ﬁnd an account of B-Trees which aim to minimize the disk access. All these structures, however, are deterministic. In this sequel, we discuss two of the interesting randomized data structures for Dictionaries. Speciﬁcally • We describe a data structure called Skip Lists and present a comprehensive probabilistic analysis of its performance. • We discuss an interesting randomized variation of a search tree called Randomized Binary Search Tree and compare and contrast the same with other competing structures.

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13.2

13-3

Preliminaries

In this section we collect some basic deﬁnitions, concepts and the results on randomized computations and probability theory. We have collected only the materials needed for the topics discussed in this chapter. For a more comprehensive treatment of randomized algorithms, refer to the book by Motwani and Raghavan [9].

13.2.1

Randomized Algorithms

Every computational step in an execution of a deterministic algorithm is uniquely determined by the set of all steps executed prior to this step. However, in a randomized algorithm, the choice of the next step may not be entirely determined by steps executed previously; the choice of next step might depend on the outcome of a random number generator. Thus, several execution sequences are possible even for the same input. Speciﬁcally, when a randomized algorithm is executed several times, even on the same input, the running time may vary from one execution to another. In fact, the running time is a random variable depending on the random choices made during the execution of the algorithm. When the running time of an algorithm is a random variable, the traditional worst case complexity measure becomes inappropriate. In fact, the quality of a randomized algorithm is judged from the statistical properties of the random variable representing the running time. Speciﬁcally, we might ask for bounds for the expected running time and bounds beyond which the running time may exceed only with negligible probability. In other words, for the randomized algorithms, there is no bad input; we may perhaps have an unlucky execution. The type of randomized algorithms that we discuss in this chapter is called Las Vegas type algorithms. A Las Vegas algorithm always terminates with a correct answer although the running time may be a random variable exhibiting wide variations. There is another important class of randomized algorithms, called Monte Carlo algorithms, which have ﬁxed running time but the output may be erroneous. We will not deal with Monte Carlo algorithms as they are not really appropriate for basic building blocks such as data structures. We shall now deﬁne the notion of eﬃciency and complexity measures for Las Vegas type randomized algorithms. Since the running time of a Las Vegas randomized algorithm on any given input is a random variable, besides determining the expected running time it is desirable to show that the running time does not exceed certain threshold value with very high probability. Such threshold values are called high probability bounds or high conﬁdence bounds. As is customary in algorithmics, we express the estimation of the expected bound or the highprobability bound as a function of the size of the input. We interpret an execution of a Las Vegas algorithm as a failure if the running time of the execution exceeds the expected running time or the high-conﬁdence bound. [Conﬁdence Bounds] Let α, β and c be positive constants. A randomized algorithm A requires resource bound f (n) with

DEFINITION 13.2

1. n−exponential probability or very high probability, if for any input of size n, the amount of the resource used by A is at most αf (n) with probability 1 − O(β −n ), β > 1. In this case f (n) is called a very high conﬁdence bound. 2. n − polynomial probability or high probability, if for any input of size n, the

© 2005 by Chapman & Hall/CRC

13-4

Handbook of Data Structures and Applications

amount of the resource used by A is at most αf (n) with probability 1 − O(n−c ). In this case f (n) is called a high conﬁdence bound. 3. n − log probability or very good probability, if for any input of size n, the amount of the resource used by A is at most αf (n) with probability 1 − O((log n)−c ). In this case f (n) is called a very good conﬁdence bound. 4. high − constant probability, if for any input of size n, the amount of the resource used by A is at most αf (n) with probability 1 − O(β −α ), β > 1. The practical signiﬁcance of this deﬁnition can be understood from the following discussions. For instance, let A be a Las Vegas type algorithm with f (n) as a high conﬁdence bound for its running time. As noted before, the actual running time T (n) may vary from one execution to another but the deﬁnition above implies that, for any execution, on any input, P r(T (n) > f (n)) = O(n−c ). Even for modest values of n and c, this bound implies an extreme rarity of failure. For instance, if n = 1000 and c = 4, we may conclude that the chance that the running time of the algorithm A exceeding the threshold value is one in zillion.

13.2.2

Basics of Probability Theory

We assume that the reader is familiar with basic notions such as sample space, event and basic axioms of probability. We denote as P r(E) the probability of the event E. Several results follow immediately from the basic axioms, and some of them are listed in Lemma 13.1. LEMMA 13.1

1. 2. 3. 4.

The following laws of probability must hold:

P r(φ) = 0 P r(E c ) = 1 − P r(E) P r(E1 ) ≤ P r(E2 ) if E1 ⊆ E2 P r(E1 ∪ E2 ) = P r(E1 ) + P r(E2 ) − P r(E1 ∩ E2 ) ≤ P r(E1 ) + P r(E2 )

Extending item 4 in Lemma 13.1 to countable unions yields the property known as sub additivity. Also known as Boole’s Inequality, it is stated in Theorem 13.1. THEOREM 13.1

[Boole’s Inequality] P r(∪∞ i=1 Ei ) ≤

∞ i=1

P r(Ei )

A probability distribution is said to be discrete k if the sample space S is ﬁnite or countable. If E = {e1 , e2 , ..., ek } is an event, P r(E) = i=1 P r({ei }) because all elementary events are mutually exclusive. If |S| = n and P r({e}) = n1 for every elementary event e in S, we call the distribution a uniform distribution of S. In this case,

P r(E)

=

P r(e)

e∈E

=

1 n

=

|E|/|S|

e∈E

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13-5

which agrees with our intuitive and a well-known deﬁnition that probability is the ratio of the favorable number of cases to the total number of cases, when all the elementary events are equally likely to occur.

13.2.3

Conditional Probability

In several situations, the occurrence of an event may change the uncertainties in the occurrence of other events. For instance, insurance companies charge higher rates to various categories of drivers, such as those who have been involved in traﬃc accidents, because the probabilities of these drivers ﬁling a claim is altered based on these additional factors. [Conditional Probability] The conditional probability of an event E1 given that another event E2 has occurred is deﬁned by P r(E1 /E2 ) (“P r(E1 /E2 )” is read as “the probability of E1 given E2 .”). DEFINITION 13.3

LEMMA 13.2

P r(E1 /E2 ) =

P r(E1 ∩E2 ) P r(E2 ) ,

provided P r(E2 ) = 0.

Lemma 13.2 shows that the conditional probability of two events is easy to compute. When two or more events do not inﬂuence each other, they are said to be independent. There are several notions of independence when more than two events are involved. Formally, [Independence of two events] Two events are independent if P r(E1 ∩ E2 ) = P r(E1 )P r(E2 ), or equivalently, P r(E1 /E2 ) = P r(E1 ).

DEFINITION 13.4

[Pairwise independence] Events E1 , E2 , . . . Ek are said to be pairwise independent if P r(Ei ∩ Ej ) = P r(Ei )P r(Ej ), 1 ≤ i = j ≤ n.

DEFINITION 13.5

Given a partition S1 , . . . , Sk of the sample space S, the probability of an event E may be expressed in terms of mutually exclusive events by using conditional probabilities. This is known as the law of total probability in the conditional form. [Law of total probability in the conditional form] For any partition S1 , ..., Sk of the sample space S, P r(E) = ki=1 P r(E/Si ) P r(Si ). LEMMA 13.3

The law of total probability in the conditional form is an extremely useful tool for calculating the probabilities of events. In general, to calculate the probability of a complex event E, we may attempt to ﬁnd a partition S1 , S2 , . . . , Sk of S such that both P r(E/Si ) and P r(Si ) are easy to calculate and then apply Lemma 13.3. Another important tool is Bayes’ Rule. THEOREM 13.2

1. P r(E1 /E2 ) =

[Bayes’ Rule] For events with non-zero probabilities, P r(E2 /E1 )P r(E1 ) P r(E2 )

2. If S1 , S2 , ..., Sk is a partition, P r(Si /E) =

© 2005 by Chapman & Hall/CRC

P P r(E/Si )P r(Si ) j=1 P r(E/Sj )P r(Sj )

13-6

Handbook of Data Structures and Applications

Part (1) is immediate by applying the deﬁnition of conditional probability; Part (2) is immediate from Lemma 13.3.

Proof

Random Variables and Expectation

Most of the random phenomena are so complex that it is very diﬃcult to obtain detailed information about the outcome. Thus, we typically study one or two numerical parameters that we associate with the outcomes. In other words, we focus our attention on certain real-valued functions deﬁned on the sample space. DEFINITION 13.6 A random variable is a function from a sample space into the set of real numbers. For a random variable X, R(X) denotes the range of the function X.

Having deﬁned a random variable over a sample space, an event of interest may be studied through the values taken by the random variables on the outcomes belonging to the event. In order to facilitate such a study, we supplement the deﬁnition of a random variable by specifying how the probability is assigned to (or distributed over) the values that the random variable may assume. Although a rigorous study of random variables will require a more subtle deﬁnition, we restrict our attention to the following simpler deﬁnitions that are suﬃcient for our purposes. A random variable X is a discrete random variable if its range R(X) is a ﬁnite or countable set (of real numbers). This immediately implies that any random variable that is deﬁned over a ﬁnite or countable sample space is necessarily discrete. However, discrete random variables may also be deﬁned on uncountable sample spaces. For a random variable X, we deﬁne its probability mass function (pmf ) as follows: DEFINITION 13.7 [Probability mass function] For a random variable X, the probability mass function p(x) is deﬁned as p(x) = P r(X = x), ∀x ∈ R(X).

The probability mass function is also known as the probability density function. Certain trivial properties are immediate, and are given in Lemma 13.4. LEMMA 13.4

The probability mass function p(x) must satisfy

1. p(x) ≥ 0, ∀x ∈ R(X) 2. x∈R(X) p(x) = 1 Let X be a discrete random variable with probability mass function p(x) and range R(X). The expectation of X (also known as the expected value or mean of X) is its average value. Formally, [Expected value of a discrete random variable] The expected value of a discrete random variable X with probability mass function p(x) is given by E(X) = µX = x∈R(X) xp(x). DEFINITION 13.8

LEMMA 13.5

The expected value has the following properties:

1. E(cX) = cE(X) if c is a constant

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13-7

2. (Linearity of expectation) E(X + Y ) = E(X) + E(Y ), provided the expectations of X and Y exist Finally, a useful way of computing the expected value is given by Theorem 13.3. THEOREM 13.3

If R(X) = {0, 1, 2, ...}, then E(X) =

∞ i=1

P r(X ≥ i).

Proof

E(X) = = =

∞ i=0 ∞ i=0 ∞

iP r(X = i) i(P r(X ≥ i) − P r(X ≥ i + 1)) P r(X ≥ i)

i=1

13.2.4

Some Basic Distributions

Bernoulli Distribution

We have seen that a coin ﬂip is an example of a random experiment and it has two possible outcomes, called success and failure. Assume that success occurs with probability p and that failure occurs with probability q = 1 − p. Such a coin is called p-biased coin. A coin ﬂip is also known as Bernoulli Trial, in honor of the mathematician who investigated extensively the distributions that arise in a sequence of coin ﬂips. DEFINITION 13.9 A random variable X with range R(X) = {0, 1} and probability mass function P r(X = 1) = p, P r(X = 0) = 1 − p is said to follow the Bernoulli Distribution. We also say that X is a Bernoulli random variable with parameter p. Binomial Distribution

n k

denote the number of k-combinations of elements chosen from a set of n elements.

n n n n! = k!(n−k)! and denotes the binomial Recall that = 1 since 0! = 1. k k 0 n coeﬃcients because they arise in the expansion of (a + b) . Deﬁne the random variable X to be the number of successes in n ﬂips of a p-biased coin. The variable X satisﬁes the binomial distribution. Speciﬁcally, Let

DEFINITION 13.10 [Binomial distribution] A random variable with range R(X) = {0, 1, 2, . . . , n} and probability mass function

n pk q n−k , f or k = 0, 1, . . . , n P r(X = k) = b(k, n, p) = k

satisﬁes the binomial distribution. The random variable X is called a binomial random variable with parameters n and p.

© 2005 by Chapman & Hall/CRC

13-8

Handbook of Data Structures and Applications

THEOREM 13.4 For a binomial random variable X, with parameters n and p, E(X) = np and V ar(X) = npq. Geometric Distribution

Let X be a random variable X denoting the number of times we toss a p-biased coin until we get a success. Then, X satisﬁes the geometric distribution. Speciﬁcally, DEFINITION 13.11 [Geometric distribution] A random variable with range R(X) = {1, 2, . . . , ∞} and probability mass function P r(X = k) = q k−1 p, for k = 1, 2, . . . , ∞ satisﬁes the geometric distribution. We also say that X is a geometric random variable with parameter p.

The probability mass function is based on k−1 failures followed by a success in a sequence of k independent trials. The mean and variance of a geometric distribution are easy to compute. THEOREM 13.5

V ar(X) =

For a geometrically distributed random variable X, E(X) =

q p2 .

1 p

and

Negative Binomial distribution

Fix an integer n and deﬁne a random variable X denoting the number of ﬂips of a pbiased coin to obtain n successes. The variable X satisﬁes a negative binomial distribution. Speciﬁcally, DEFINITION 13.12

A random variable X with R(X) = {0, 1, 2, ...} and probability

mass function deﬁned by P r(X = k) = =

0

k−1 n−1

pn q k−n

if k ≥ n

if 0 ≤ k < n

(13.1)

is said to be a negative binomial random variable with parameters n and p. Equation (13.1) follows because, in order for the nth success to occur in the k th ﬂip there should be n − 1 successes in the ﬁrst k − 1 ﬂips and the k th ﬂip should also result in a success. DEFINITION 13.13

X1 , X2 , . . . , Xn , the sum

Given n identically distributed independent random variables Sn = X 1 + X 2 + · · · + X n

deﬁnes a new random variable. If n is a ﬁnite, ﬁxed constant then Sn is known as the deterministic sum of n random variables. On the other hand, if n itself is a random variable, Sn is called a random sum. Let X = X1 + X2 + · · · + Xn be a deterministic sum of n identical independent random variables. Then

THEOREM 13.6

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13-9

1. If Xi is a Bernoulli random variable with parameter p then X is a binomial random variable with parameters n and p. 2. If Xi is a geometric random variable with parameter p, then X is a negative binomial with parameters n and p. 3. If Xi is a (negative) binomial random variable with parameters r and p then X is a (negative) binomial random variable with parameters nr and p. Deterministic sums and random sums may have entirely diﬀerent characteristics as the following theorem shows. Let X = X1 + · · · + XN be a random sum of N geometric random variables with parameter p. Let N be a geometric random variable with parameter α. Then X is a geometric random variable with parameter αp.

THEOREM 13.7

13.2.5

Tail Estimates

Recall that the running time of a Las Vegas type randomized algorithm is a random variable and thus we are interested in the probability of the running time exceeding a certain threshold value. Typically we would like this probability to be very small so that the threshold value may be taken as the ﬁgure of merit with high degree of conﬁdence. Thus we often compute or estimate quantities of the form P r(X ≥ k) or P r(X ≤ k) during the analysis of randomized algorithms. Estimates for the quantities of the form P r(X ≥ k) are known as tail estimates. The next two theorems state some very useful tail estimates derived by Chernoﬀ. These bounds are popularly known as Chernoﬀ bounds. For simple and elegant proofs of these and other related bounds you may refer [1]. Let X be a sum of n independent random variables Xi with R(Xi ) ⊆ [0, 1]. Let E(X) = µ. Then,

THEOREM 13.8

µ k n − µ n−k

P r(X ≥ k) ≤

k n−k µ k ≤ ek−µ k µ e P r(X ≥ (1 + )µ) ≤ (1 + )(1+)

for k > µ

for k > µ

(13.2) (13.3)

for ≥ 0

(13.4)

Let X be a sum of n independent random variables Xi with R(Xi ) ⊆ [0, 1]. Let E(X) = µ. Then,

THEOREM 13.9

P r(X ≤ k) ≤ ≤ P r(X ≤ (1 − )µ) ≤

© 2005 by Chapman & Hall/CRC

µ k n − µ n−k k n−k µ k ek−µ k e

2 − µ2

k<µ

, for ∈ (0, 1)

k<µ

(13.5) (13.6) (13.7)

13-10

Handbook of Data Structures and Applications

Recall that a deterministic sum of several geometric variables results in a negative binomial random variable. Hence, intuitively, we may note that only the upper tail is meaningful for this distribution. The following well-known result relates the upper tail value of a negative binomial distribution to a lower tail value of a suitably deﬁned binomial distribution. Hence all the results derived for lower tail estimates of the binomial distribution can be used to derive upper tail estimates for negative binomial distribution. This is a very important result because ﬁnding bounds for the right tail of a negative binomial distribution directly from its deﬁnition is very diﬃcult. THEOREM 13.10 Let X be a negative binomial random variable with parameters r and p. Then, P r(X > n) = P r(Y < r) where Y is a binomial random variable with parameters n and p.

13.3

Skip Lists

Linked list is the simplest of all dynamic data structures implementing a Dictionary. However, the complexity of Search operation is O(n) in a Linked list. Even the Insert and Delete operations require O(n) time if we do not specify the exact position of the item in the list. Skip List is a novel structure, where using randomness, we construct a number of progressively smaller lists and maintain this collection in a clever way to provide a data structure that is competitive to balanced tree structures. The main advantage oﬀered by skip list is that the codes implementing the dictionary operations are very simple and resemble list operations. No complicated structural transformations such as rotations are done and yet the expected time complexity of Dictionary operations on Skip Lists are quite comparable to that of AVL trees or splay trees. Skip Lists are introduced by Pugh [6]. Throughout this section let S = {k1 , k2 , . . . , kn } be the set of keys and assume that k1 < k2 < . . . < kn . DEFINITION 13.14

Let S0 , S1 , S2 , . . . , Sr be a collection of sets satisfying S = S 0 ⊇ S1 ⊇ S2 ⊇ · · · ⊃ Sr = φ

Then, we say that the collection S0 , S1 , S2 , . . . , Sr deﬁnes a leveling with r levels on S. The keys in Si are said to be in level i, 0 ≤ i ≤ r. The set S0 is called the base level for the leveling scheme. Notice that there is exactly one empty level, namely Sr . The level number l(k) of a key k ∈ S is deﬁned by l(k) = max{i | k ∈ Li }. In other words, k ∈ S0 , S1 , S2 , . . . , Sl(k) but k ∈ Sl(k)+1 · · · Sr . For an eﬃcient implementation of the dictionary, instead of working with the current set S of keys, we would rather work with a leveling of S. The items of Si will be put in the increasing order in a linked list denoted by Li . We attach the special keys −∞ at the beginning and +∞ at the end of each list Li as sentinels. In practice, −∞ is a key value that is smaller than any key we consider in the application and +∞ denotes a key value larger than all the possible keys. A leveling of S is implemented by maintaining all the lists

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13-11

L0 , L1 , L2 , . . . , Lr with some more additional links as shown in Figure 13.1. Speciﬁcally, the box containing a key k in Li will have a pointer to the box containing k in Li−1 . We call such pointers descent pointers. The links connecting items of the same list are called horizontal pointers. Let B be a pointer to a box in the skip list. We use the notations Hnext[B], and Dnext[B], for the horizontal and descent pointers of the box pointed by B respectively. The notation key[B] is used to denote the key stored in the box pointed by B. The name of the skip list is nothing but a pointer to the box containing −∞ in the rth level as shown in the ﬁgure. From the Figure 13.1 it is clear that Li has horizontal pointers that skip over several intermediate elements of Li−1 . That is why this data structure is called the Skip List.

SL

8 +

8 | *

8 +

8 |

32

* 56

87

8 +

8 |

32

* 56

61

87

8 +

8 |

32

* 61

87

95

87

95

87

95

8 +

56

8 +

32

8 +

8 |

27

*

8 |

27

32

56

61

83

84 *

8 |

L0

27

32

52

56

61

83

84

*

FIGURE 13.1: A Skip List. The starred nodes are marked by Mark(86,SL).

How do we arrive at a leveling for a given set? We may construct Si+1 from Si in a systematic, deterministic way. While this may not pose any problem for a static search problem, it will be extremely cumbersome to implement the dynamic dictionary operations. This is where randomness is helpful. To get Si+1 from Si , we do the following. For each element k of Si toss a coin and include k in Si+1 iﬀ we get success in the coin toss. If the coin is p-biased, we expect | Si+1 | to be roughly equal to p | Si |. Starting from S, we may repeatedly obtain sets corresponding to successive levels. Since the coin tosses are independent, there is another useful, and equivalent way to look at our construction. For each key k in S, keep tossing a coin until we get a failure. Let h be the number of successes before the ﬁrst failure. Then, we include k in h further levels treating S = S0 as the base level. In other words, we include k in the sets S1 , S2 , . . . , Sh . This suggests us to deﬁne a random variable Zi for each key ki ∈ S0 to be the number of times we toss a p-biased coin

© 2005 by Chapman & Hall/CRC

13-12

Handbook of Data Structures and Applications

before we obtain a failure. Since Zi denotes the number of additional copies of ki in the skip list, the value maximum{Zi : 1 ≤ i ≤ n} deﬁnes the highest nonempty level. Hence, we have, r

= 1 + maximum{Zi : 1 ≤ i ≤ n}

| SL | = n + Z1 + Z2 + · · · + Zn + 2r + 2

(13.8) (13.9)

where r is the number of levels and | SL | is the number of boxes or the space complexity measure of the Skip List. In the expression for | SL | we have added n to count the keys in the base level and 2r + 2 counts the sentinel boxes containing +∞ and −∞ in each level.

13.4 13.4.1

Structural Properties of Skip Lists Number of Levels in Skip List

Recall that r = 1 + maxi {Zi }. Notice that Zi ≥ k iﬀ the coin tossed for ki gets a run of at least k successes right from the beginning and this happens with probability pk . Since r ≥ k iﬀ at least one of Zi ≥ k − 1 , we easily get the following fact from Boole’s inequality P r(r ≥ k) ≤ npk−1 Choosing k = 4 log1/p n + 1, we immediately obtain a high conﬁdence bound for the number of levels. In fact, P r(r ≥ 4 log n + 1) ≤ =

nn−4 1 n3

(13.10)

We obtain an estimation for the expected value of r, using the formula stated in theorem ( 13.3) as follows:

E(r)

=

∞

P r(r ≥ i)

i=1

=

4 log n

P r(r ≥ i) +

i=1

≤

4 log n i=1

P r(r ≥ i)

i>4 log n

1+

∞

npi−1

i>4 log n

= 4 log n + np4 log n (1 + p + p2 + · · · ) 1 = 4 log n + n · 4 · (1 − p)−1 if base of the log is 1/p n ≤ 4 log n + 1 for suﬃciently large n Thus E(r) = O(log n) Hence, THEOREM 13.11 The expected number of levels in a skip list of n elements is O(log n). In fact, the number is O(log n) with high probability.

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13.4.2

13-13

Space Complexity

Recall that the space complexity, | SL | is given by | SL |= Z1 + Z2 + · · · + Zn + n + 2r + 2. As we know that r = O(log n) with high probability, let us focus on the sum Z = Z1 + Z 2 + · · · + Z n . Since Zi is a geometric random variable with parameter p, Z is a negative binomial random variable by theorem 13.6. Thus E(Z) = np = O(n). We can in fact show that Z is O(n) with very high probability. Now, from theorem (13.10) P r(Z > 4n) = P r(X < n) where X is a binomial distribution with parameters 4n and p. We now assume that p = 1/2 just for the sake of simplicity in arithmetic. In the ﬁrst Chernoﬀ bound mentioned in theorem (13.9), replacing n, µ and k respectively with 4n, 2n and n, we obtain, n 3n 2n 2n P r(X < n) ≤ n 3n

3 n 2 = 2· 3 3 n 16 = 27 −n 27 = 16 This implies that 4n is in fact a very high conﬁdence bound for Z. Since | SL |= Z+n+2r+2, we easily conclude that THEOREM 13.12 The space complexity of a skip list for a set of size n is O(n) with very high probability.

13.5

Dictionary Operations

We shall use a simple procedure called Mark in all the dictionary operations. The procedure Mark takes an arbitrary value x as input and marks in each level the box containing the largest key that is less than x. This property implies that insertion, deletion or search should all be done next to the marked boxes. Let Mi (x) denote the box in the ith level that is marked by the procedure call Mark(x, SL). Recall the convention used in the linked structure that name of a box in a linked list is nothing but a pointer to that box. The keys in the marked boxes Mi (x) satisfy the following condition : key[Mi (x)] < x ≤ key[Hnext[Mi (x)]]

for all 0 ≤ i ≤ r.

(13.11)

The procedure Mark begins its computation at the box containing −∞ in level r. At any current level, we traverse along the level using horizontal pointers until we ﬁnd that the

© 2005 by Chapman & Hall/CRC

13-14

Handbook of Data Structures and Applications

next box is containing a key larger or equal to x. When this happens, we mark the current box and use the descent pointer to reach the next lower level and work at this level in the same way. The procedure stops after marking a box in level 0. See Figure 13.1 for the nodes marked by the call Mark(86,SL). Algorithm Mark(x,SL) -- x is an arbitrary value. -- r is the number of levels in the skip list SL. 1. Temp = SL. 2. For i = r down to 0 do While (key[Hnext[Temp]] < x) Temp = Hnext[Temp]; Mark the box pointed by Temp; Temp = Dnext[Temp]; 3. End. We shall now outline how to use marked nodes for Dictionary operations. Let M0 (x) be the box in level 0 marked by Mark(x). It is clear that the box next to M0 (x) will have x iﬀ x ∈ S. Hence our algorithm for Search is rather straight forward. To insert an item in the Skip List, we begin by marking the Skip List with respect to the value x to be inserted. We assume that x is not already in the Skip List. Once the marking is done, inserting x is very easy. Obviously x is to be inserted next to the marked boxes. But in how many levels we insert x? We determine the number of levels by tossing a coin on behalf of x until we get a failure. If we get h successes, we would want x to be inserted in all levels from 0 to h. If h ≥ r, we simply insert x at all the existing levels and create a new level consisting of only −∞ and +∞ that corresponds to the empty set. The insertion will be done starting from the base level. However, the marked boxes are identiﬁed starting from the highest level. This means, the Insert procedure needs the marked boxes in the reverse order of its generation. An obvious strategy is to push the marked boxes in a stack as and when they are marked in the Mark procedure. We may pop from the stack as many marked boxes as needed for insertion and then insert x next to each of the popped boxes. The deletion is even simpler. To delete a key x from S, simply mark the Skip List with respect to x. Note that if x is in Li , then it will be found next to the marked box in Li . Hence, we can use the horizontal pointers in the marked boxes to delete x from each level where x is present. If the deletion creates one or more empty levels, we ignore all of them and retain only one level corresponding to the empty set. In other words, the number of levels in the Skip List is reduced in this case. In fact, we may delete an item “on the ﬂy” during the execution of the Mark procedure itself. As the details are simple we omit pseudo codes for these operations.

13.6

Analysis of Dictionary Operations

It is easy to see that the cost of Search, Insert and Delete operations are dominated by the cost of Mark procedure. Hence we shall analyze only the Mark procedure. The Mark procedure starts at the ‘r’th level and proceeds like a downward walk on a staircase and ends at level 0. The complexity of Mark procedure is clearly proportional to the number of edges it traversed. It is advantageous to view the same path as if it is built from level 0 to level r. In other words, we analyze the building of the path in a direction opposite to the direction in which it is actually built by the procedure. Such an analysis is known as backward analysis.

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13-15

Henceforth let P denote the path from level 0 to level r traversed by Mark(x) for the given ﬁxed x. The path P will have several vertical edges and horizontal edges. (Note that at every box either P moves vertically above or moves horizontally to the left). Clearly, P has r vertical edges. To estimate number of horizontal edges, we need the following lemmas. LEMMA 13.6 Let the box b containing k at level i be marked by Mark(x). Let a box w containing k be present at level i + 1. Then, w is also marked.

Proof Since b is marked, from (13.11), we get that there is no value between k and x in level i. This fact holds good for Li+1 too because Si+1 ⊆ Si . Hence the lemma.

Let the box b containing k at level i be marked by Mark(x). Let k ∈ Li+1 . Let u be the ﬁrst box to the left of b in Li having a “vertical neighbor” w. Then w is marked.

LEMMA 13.7

Proof Let w.key = u.key = y. Since b is marked, k satisﬁes condition (13.11). Since u is the ﬁrst node in the left of b having a vertical neighbor, none of the keys with values in between y and x will be in Li+1 . Also, k ∈ Li+1 according to our assumption in the lemma. Thus y is the element in Li+1 that is just less than x. That is, y satisﬁes the condition (13.11) at level i + 1. Hence the w at level i + 1 will be marked.

Lemmas (13.6) and (13.7) characterize the segment of P between two successive marked boxes. This allows us to give an incremental description of P in the following way. P starts from the marked box at level 0. It proceeds vertically as far as possible (lemma 13.6) and when it cannot proceed vertically it proceeds horizontally. At the “ﬁrst” opportunity to move vertically, it does so (lemma 13.7), and continues its vertical journey. Since for any box a vertical neighbor exists only with a probability p, we see that P proceeds from the current box vertically with probability p and horizontally with probability (1 − p). Hence, the number of horizontal edges of P in level i is a geometric random variable, say, Yi , with parameter (1 − p). Since the number of vertical edges in P is exactly r, we conclude, THEOREM 13.13 The number of edges traversed by Mark(x) for any ﬁxed x is given by | P |= r + (Y0 + Y1 + Y2 + · · · + Yr−1 ) where Yi is a geometric random variable with parameters 1 − p and r is the random variable denoting the number of levels in the Skip List.

Our next mission is to obtain a high conﬁdence bound for the size of P . As we have already derived high conﬁdence bound for r, let focus on the sum Hr = Y0 + Y1 + · · · + Yr−1 for a while. Since r is a random variable Hr is not a deterministic sum of random variables but a random sum of random variables. Hence we cannot directly apply theorem (13.6) and the bounds for negative binomial distributions. Let X be the event of the random variable r taking a value less than or equal to 4 log n. Note that P (X) < n13 by (13.10).

© 2005 by Chapman & Hall/CRC

13-16

Handbook of Data Structures and Applications

From the law of total probability, Boole’s inequality and equation (13.10) we get, P r(Hr > 16 log n)

= P r([Hr > 16 log n] ∩ X) + P r([Hr > 16 log n] ∩ X) = P r([Hr > 16 log n] ∩ r ≤ 4 log n) + P r([Hr > 16 log n] ∩ X) ≤

4 log n

P r(Hk > 16 log n) + P r(X)

k=0

≤ (1 + 4 log n)P r(H4 log n > 16 log n) +

1 n3

Now P r(H4 log n > 16 log n) can be computed in a manner identical to the one we carried out in the space complexity analysis. Notice that H4 log n is a deterministic sum of geometric random variables. Hence we can apply theorem (13.10) and theorem (13.9) to derive a high conﬁdence bound. Speciﬁcally, by theorem (13.10), P r(H4 log n > 16 log n) = P r(X < 4 log n), where X is a binomial random variable with parameters 16 log n and p. Choosing p = 1/2 allows us to set µ = 8 log n, k = 4 log n and replace n by 16 log n in the ﬁrst inequality of theorem (13.9). Putting all these together we obtain, P r(H4 log n > 16 log n) = P r(X < 4 log n)

4 log n

12 log n 8 log n 8 log n ≤ 4 log n 12 log n

3 4 log n 2 = 2· 3 3 4 log n 16 = 27 log n 1 < 8 1 = n3 Therefore

P r(Hr > 16 log n) < <

(1 + 4 log n) 1 n2

1 n3

+

1 n3

if n ≥ 32

This completes the derivation of a high conﬁdence bound for Hr . From this, we can easily obtain a bound for expected value of Hr . We use theorem ( 13.3) and write the expression for E(Hr ) as 16 log n E(Hr ) = P r(Hr ≥ i) + P r(Hr ≥ i). i=1

i>16 log n

The ﬁrst sum is bounded above by 16 log n as each probability value is less than 1 and by the high conﬁdence ∞bound that we have established just now, we see that the second sum is dominated by i=1 1/i2 which is a constant. Thus we obtain,

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13-17

E(Hr ) ≤ 16 log n + c = O(log n). Since P = r + Hr we easily get that E(| P |) = O(log n) and | P |= O(log n) with probability greater than 1 − O( n12 ). Observe that we have analyzed Mark(x) for a given ﬁxed x. To show that the high conﬁdence bound for any x, we need to proceed little further. Note that there are only n + 1 distinct paths possible with respect to the set {−∞ = k0 , k1 , ..., kn , kn+1 = +∞}, each corresponding to the x lying in the internal [ki , ki+1 ), i = 0, 1, ..., n. Therefore, for any x, Mark(x) walks along a path P satisfying E(| P |) = O(log n) and | P |= O(log n) with probability greater than 1 − O( n1 ). Summarizing, THEOREM 13.14 The Dictionary operations Insert, Delete, and Search take O(log n) expected time when implemented using Skip Lists. Moreover, the running time for Dictionary operations in a Skip List is O(log n) with high probability.

13.7

Randomized Binary Search Trees

A Binary Search Tree (BST) for a set S of keys is a binary tree satisfying the following properties. (a) Each node has exactly one key of S. We use the notation v.key to denote the key stored at node v. (b) For all node v and for all nodes u in the left subtree of v and for all nodes w in the right subtree of v, the keys stored in them satisfy the so called search tree property: u.key < v.key < w.key The complexity of the dictionary operations are bounded by the height of the binary search tree. Hence, ways and means were explored for controlling the height of the tree during the course of execution. Several clever balancing schemes were discovered with varying degrees of complexities. In general, the implementation of balancing schemes are tedious and we may have to perform a number of rotations which are complicated operations. Another line of research explored the potential of possible randomness in the input data. The idea was to completely avoid balancing schemes and hope to have ‘short ’ trees due to randomness in input. When only random insertion are done, we obtain so called Randomly Built Binary Tree (RBBT). RBBTs have been shown to have O(log n) expected height. What is the meaning of random insertion? Suppose we have already inserted the values a1 , a2 , a3 , · · · , ak−1 . These values, when considered in sorted order, deﬁne k intervals on the real line and the new value to be inserted, say x, is equally likely to be in any of the k intervals. The ﬁrst drawback of RBBT is that this assumption may not be valid in practice and when this assumption is not satisﬁed, the resulting tree structure could be highly skewed and the complexity of search as well as insertion could be as high as O(n). The second major drawback is when deletion is also done on these structures, there is a tremendous degradation in the performance. There is no theoretical results available and extensive

© 2005 by Chapman & Hall/CRC

13-18

Handbook of Data Structures and Applications

√ empirical studies show that the height of an RBBT could grow to O( n) when we have arbitrary mix of insertion and deletion, even if the randomness assumption is satisﬁed for inserting elements. Thus, we did not have a satisfactory solution for nearly three decades. In short, the randomness was not preserved by the deletion operation and randomness preserving binary tree structures for the dictionary operations was one of the outstanding open problems, until an elegant aﬃrmative answer is provided by Martinez and Roura in their landmark paper [3]. In this section, we shall brieﬂy discuss about structure proposed by Martinez and Roura.

[Randomized Binary Search Trees] Let T be a binary search tree of size n. If n = 0, then T = N U LL and it is a random binary search tree. If n > 0, T is a random binary search tree iﬀ both its left subtree L and right subtree R are independent random binary search trees and

DEFINITION 13.15

Pr{Size(L) = i|Size(T ) = n} =

1 , 0 ≤ i ≤ n. n

The above deﬁnition implies that every key has the same probability of n1 for becoming the root of the tree. It is easy to prove that the expected height of a RBST with n nodes is O(log n). The RBSTs possess a number of interesting structural properties and the classic book by Mahmoud [2] discusses them in detail. In view of the above fact, it is enough if we prove that when insert or delete operation is performed on a RBST, the resulting tree is also an RBST.

13.7.1

Insertion in RBST

When a key x is inserted in a tree T of size n, we obtain a tree T of size n + 1. For T , 1 as we observed earlier, x should be in the root with probability n+1 . This is our starting point. Algorithm Insert(x, T) - L is the left subtree of the root - R is the right subtree of the root 1. n = size(T); 2. r = random(0, n); 3. If (r = n) then Insert_at_root(x, T); 4. If (x < key at root of T) then Insert(x, L); Else Insert(x, R); To insert x as a root of the resulting tree, we ﬁrst split the current tree into two trees labeled T< and T> , where T< contains all the keys in T that are smaller than x and T> contains all the keys in T that are larger than x. The output tree T is constructed by placing x at the root and attaching T< as its left subtree and T> as its right subtree. The algorithm for splitting a tree T into T< and T> with respect to a value x is similar to the partitioning algorithm done in quicksort. Speciﬁcally, the algorithm split(x,T) works as

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13-19

follows. If T is empty , nothing needs to be done; both T< and T> are empty. When T is non-empty we compare x with Root(T ).key. If x < Root(T ).key, then root of T as well as the right subtree of T belong to T> . To compute T< and the remaining part of T> we recursively call split(x, L), where L is the left subtree for the root of T . If x > Root(T ).key, T< is built ﬁrst and recursion proceeds with split(x, R). The details are left as easy exercise. We shall ﬁrst prove that T< and T> are independent Random Binary Search Trees. Formally, THEOREM 13.15 Let T< and T> be the BSTs produced by split(x, T ). If T is a random BST containing the set of keys S, then T< and T> are RBBTs containing the keys S< = {y ∈ S | y < x} and S> = {y ∈ S | y > x}, respectively.

Let size(T ) = n > 0, x > Root(T ).key, we will show that for any z ∈ S< , the probability that z is the root of T< is 1/m where m = size(T< ). In fact,

Proof

= =

Pr( z is root of T< | root of T is less than x) Pr( z is root of T< and root of T is less than x) Pr(root of T is less than x) 1 1/n = . m/n m

The independence of T< and T> follows from the independence of L and R of T and by induction. We are now ready to prove that randomness is preserved by insertion. Speciﬁcally, THEOREM 13.16 Let T be a RBST for the set of keys S and x ∈ / S, and assume that insert(s, T ) produces a tree, say T for S ∪ {x}. Then, T is a RBST. Proof

A key y ∈ S will be at the root of T iﬀ

1) y is at root of T . 2) x is not inserted at the root of T n As 1) and 2) are independent events with probability n1 and n+1 , respectively, it follows 1 n 1 that Prob(y is at root of T ) = n · n+1 = n+1 . The key x can be at the root of T only when 1 insert(x, T ) invokes insert-at-root(x, T ) and this happens with probability n+1 . Thus, any 1 key in S ∪ {x} has the probability of n+1 for becoming the root of T . The independence of left and right subtrees of T follows from independence of left and right subtrees of T , induction, and the previous theorem.

13.7.2

Deletion in RBST

Suppose x ∈ T and let Tx denote the subtree of T rooted at x. Assume that L and R are the left and right subtrees of Tx . To delete x, we build a new BST Tx = Join(L, R)

© 2005 by Chapman & Hall/CRC

13-20

Handbook of Data Structures and Applications

containing the keys in L and R and replace Tx by Tx . Since pseudocode for deletion is easy to write, we omit the details. We shall take a closer look at the details of the Join routine. We need couple of more notations to describe the procedure Join. Let Ll and Lr denote the left and right subtrees of L and Rl and Rr denote the left and right subtrees of R, respectively. Let a denote the root of L and b denote the root of R. We select either a or b to serve as the root of Tx with m appropriate probabilities. Speciﬁcally, the probability for a becoming the root of Tx is m+n n and for b it is n+m where m = size(L) and n = size(R). If a is chosen as the root, the its left subtree Ll is not modiﬁed while its right subtree Lr is replaced with Join(Lr , R). If b is chosen as the root, then its right subtree Rr is left intact but its left subtree Rl is replaced with Join(L, Rl ). The join of an empty tree with another tree T is T it self and this is the condition used to terminate the recursion.

Algorithm Join(L,R) -- L and R are RBSTs with roots a and b and size m and n respectively. -- All keys in L are strictly smaller than all keys in R. -- $L_l$ and $L_r$ respectively denote the left and right subtree of L. -- $R_l$ and $R_r$ are similarly defined for R. 1. 2. 3. 4.

If ( L is NULL) return R. If ( R is NULL) return L. Generate a random integer i in the range [0, n+m-1]. If ( i < m ) {* the probability for this event is m/(n+m).*} L_r = Join(L_l,R); return L; else {* the probability for this event is n/(n+m).*} R_l = Join(L,R_l); return R;

It remains to show that Join of two RBSTs produces RBST and deletion preserves randomness in RBST. THEOREM 13.17

The Algorithm Join(L,R) produces a RBST under the conditions

stated in the algorithm. Proof We show that any key has the probability of 1/(n + m) for becoming the root of the tree output by Join(L,R). Let x be a key in L. Note that x will be at the root of Join(L,R) iﬀ

• x was at the root of L before the Join operation, and, • The root of L is selected to serve as the root of the output tree during the Join operation. The probability for the ﬁrst event is 1/m and the second event occurs with probability m/(n + m). As these events are independent, it follows that the probability of x at the root 1 m 1 of the output tree is m · n+m = n+m . A similar reasoning holds good for the keys in R.

© 2005 by Chapman & Hall/CRC

Randomized Dictionary Structures

13-21

Finally, THEOREM 13.18 for K − {x}.

If T is a RBST for a set K of keys, then Delete(x,T) outputs a RBST

Proof We sketch only the chance counting argument. The independence of the subtrees follows from the properties of Join operation and induction. Let T = Delete(x, T ). Assume that x ∈ K and size of K is n. We have to prove that for any y ∈ K, y = x, the probability for y in root of T is 1/(n − 1). Now, y will be at the root of T iﬀ either x was at the root of T and its deletion from T brought y to the root of T or y was at the root of T (so that deletion of x from T did not dislocate y). The former happens with a probability 1 1 1 n · n−1 and the probability of the later is n . As these events are independent, we add the probabilities to obtain the desired result.

13.8

Bibliographic Remarks

In this chapter we have discussed two randomized data structures for Dictionary ADT. Skip Lists are introduced by Pugh in 1990 [6]. A large number of implementations of this structure by a number of people available in the literature, including the one by the inventor himself. Sedgewick gives an account of the comparison of the performances of Skip Lists with the performances of other balanced tree structures [10]. See [7] for a discussion on the implementation of other typical operations such as merge. Pugh argues how Skip Lists are more eﬃcient in practice than balanced trees with respect to Dictionary operations as well as several other operations. Pugh has further explored the possibilities of performing concurrent operations on Skip Lists in [8]. For a more elaborate and deeper analysis of Skip Lists, refer the PhD thesis of Papadakis [4]. In his thesis, he has introduced deterministic skip lists and compared and contrasted the same with a number of other implementations of Dictionaries. Sandeep Sen [5] provides a crisp analysis of the structural properties of Skip Lists. Our analysis presented in this chapter is somewhat simpler than Sen’s analysis and our bounds are derived based on diﬀerent tail estimates of the random variables involved. The randomized binary search trees are introduced by Martinez and Roura in their classic paper [3] which contains many more details than discussed in this chapter. In fact, we would rate this paper as one of the best written papers in data structures. Seidel and Aragon have proposed a structure called probabilistic priority queues [11] and it has a comparable performance. However, the randomness in their structure is achieved through randomly generated real numbers( called priorities) while the randomness in Martinez and Roura’s structure is inherent in the tree itself. Besides this being simpler and more elegant, it solves one of the outstanding open problems in the area of search trees.

References [1] T.Hagerup and C.Rub, A guided tour of Chernoﬀ bounds, Information processing Letters, 33:305-308, 1990. [2] H.M.Mahmoud, Evolution of Random Search Trees, Wiley Interscience, USA, 1992. [3] C.Martinez and S.Roura, Randomized Binary search Trees, Journal of the ACM, 45:288-323, 1998. [4] Th.Papadakis, Skip List and probabilistic analysis of algorithms, PhD Thesis, University of Waterloo, Canada, 1993. (Available as Technical Report CS-93-28).

© 2005 by Chapman & Hall/CRC

13-22

Handbook of Data Structures and Applications

[5] S.Sen, Some observations on Skip Lists, Information Processing Letters, 39:173-176, 1991. [6] W.Pugh, Skip Lists: A probabilistic alternative to balanced trees, Comm.ACM, 33:668-676, 1990. [7] W.Pugh, A Skip List cook book, Technical report, CS-TR-2286.1, University of Maryland, USA, 1990. [8] W.Pugh, Concurrent maintenance of Skip Lists, Technical report, CS-TR-2222, University of Maryland, USA, 1990. [9] P.Raghavan and R.Motwani, Randomized Algorithms, Cambridge University Press, 1995. [10] R.Sedgewick, Algorithms, Third edition, Addison-Wesley, USA, 1998. [11] R.Seidel and C.Aragon, Randomized Search Trees, Algorithmica, 16:464-497,1996.

© 2005 by Chapman & Hall/CRC

14 Trees with Minimum Weighted Path Length 14.1 14.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Huﬀman Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14-1 14-2

O(n log n) Time Algorithm • Linear Time Algorithm for Presorted Sequence of Items • Relation between General Uniquely Decipherable Codes and Preﬁx-free Codes • Huﬀman Codes and Entropy • Huﬀman Algorithm for t-ary Trees

14.3

Height Limited Huﬀman Trees . . . . . . . . . . . . . . . . . . .

14-8

Reduction to the Coin Collector Problem • The Algorithm for the Coin Collector Problem

14.4

Optimal Binary Search Trees . . . . . . . . . . . . . . . . . . . . 14-10 Approximately Optimal Binary Search Trees

14.5

Wojciech Rytter New Jersey Institute of Technology and Warsaw University

14.1

Optimal Alphabetic Tree Problem . . . . . . . . . . . . . . . 14-13 Computing the Cost of Optimal Alphabetic Tree • Construction of Optimal Alphabetic Tree • Optimal Alphabetic Trees for Presorted Items

14.6 14.7

Optimal Lopsided Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-19 Parallel Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-19

Introduction

The concept of the “weighted path length” is important in data compression and searching. In case of data compression lengths of paths correspond to lengths of code-words. In case of searching they correspond to the number of elementary searching steps. By a length of a path we mean usually its number of edges. Assume we have n weighted items, where wi is the non-negative weight of the ith item. We denote the sequence of weights by S = (w1 . . . wn ). We adopt the convention that the items have unique names. When convenient to do so, we will assume that those names are the positions of items in the list, namely integers in [1 . . . n]. We consider a binary tree T , where the items are placed in vertices of the trees (in leaves only or in every node, depending on the speciﬁc problem). We deﬁne the minimum weighted path length (cost) of the tree T as follows: cost (T ) =

n

wi level T (i)

i=1

where level T is the level function of T , i.e., level T (i) is the level (or depth) of i in T , deﬁned to be the length of the path in T from the root to i.

14-1

© 2005 by Chapman & Hall/CRC

14-2

Handbook of Data Structures and Applications

In some special cases (lopsided trees) the edges can have diﬀerent lengths and the path length in this case is the sum of individual lengths of edges on the path. In this chapter we concentrate on several interesting algorithms in the area: • Huﬀman algorithm constructing optimal preﬁx-free codes in time O(n log n), in this case the items are placed in leaves of the tree, the original order of items can be diﬀerent from their order as leaves; • A version of Huﬀman algorithm which works in O(n) time if the weights of items are sorted • Larmore-Hirschberg algorithm for optimal height-limited Huﬀman trees working in time O(n × L), where L is the upper bound on the height, it is an interesting algorithm transforming the problem to so called “coin-collector”, see [21]. • Construction of optimal binary search trees (OBST) in O(n2 ) time using certain property of monotonicity of “splitting points” of subtrees. In case of OBST every node (also internal) contains exactly one item. (Binary search trees are deﬁned in Chapter 3.) • Construction of optimal alphabetic trees (OAT) in O(n log n) time: the GarsiaWachs algorithm [11]. It is a version of an earlier algorithm of Hu-Tucker [12, 18] for this problem. The correctness of this algorithm is nontrivial and this algorithm (as well as Hu-Tucker) and these are the most interesting algorithms in the area. • Construction of optimal lopsided trees, these are the trees similar to Huﬀman trees except that the edges can have some lengths speciﬁed. • Short discussion of parallel algorithms Many of these algorithms look “mysterious”, in particular the Garsia-Wachs algorithm for optimal alphabetic trees. This is the version of the Hu-Tucker algorithm. Both algorithms are rather simple to understand in how they work and their complexity, but correctness is a complicated issue. Similarly one can observe a mysterious behavior of the Larmore-Hirschberg algorithm for height-limited Huﬀman trees. Its “mysterious” behavior is due to the strange reduction to the seemingly unrelated problem of the coin collector. The algorithms relating the cost of binary trees to shortest paths in certain graphs are also not intuitive, for example the algorithm for lopsided trees, see [6], and parallel algorithm for alphabetic trees, see [23]. The eﬃciency of these algorithms relies on the Monge property of related matrices. Both sequential and parallel algorithms for Monge matrices are complicated and interesting. The area of weighted paths in trees is especially interesting due to its applications (compression, searching) as well as to their relation to many other interesting problems in combinatorial algorithmics.

14.2

Huﬀman Trees

Assume we have a text x of length N consisting of n diﬀerent letters with repetitions. The alphabet is a ﬁnite set Σ. Usually we identify the i-th letter with its number i. The letter i appears wi times in x. We need to encode each letter in binary, as h(a), where h is a morphism of alphabet Σ into binary words, in a way to minimize the total length of encoding and guarantee that it is uniquely decipherable, this means that the extension of

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

11

0 a

14-3

1

5

6 0 b

1

2

4 0 2 0 c

1

1 2

r

1 1 d

FIGURE 14.1: A Huﬀman tree T for the items a, b, c, d, r and the weight sequence S = (5, 2, 1, 1, 2). The numbers in internal nodes are sums of weights of leaves in corresponding subtrees. Observe that weighted path length of the tree is the total sum of values in internal nodes. Hence HuﬀmanCost(S) = 2 + 4 + 6 + 11 = 23.

the morphism h to all words over Σ is one-to-one. The words h(a), where a ∈ Σ, are called codewords or codes. The special case of uniquely decipherable codes are preﬁx-free codes: none of the code is a preﬁx of another one. The preﬁx-free code can be represented as a binary tree, with left edges corresponding to zeros, and right edge corresponding to ones. Let S = {w1 , w2, . . . , wn } be the sequence of weights of items. Denote by HuﬀmanCost(S) the total cost of minimal encoding (weighted sum of lengths of code-words) and by HT(S) the tree representing an optimal encoding. Observe that several diﬀerent optimal trees are possible. The basic algorithm is a greedy algorithm designed by Huﬀman, the corresponding trees and codes are called Huﬀman trees and Huﬀman codes. Example Let text = abracadabra. The number of occurrences of letters are wa = 5, wb = 2, wc = 1, wd = 1, wr = 2. We treat letters as items, and the sequence of weights is: S = (5, 2, 1, 1, 2) An optimal tree of a preﬁx code is shown in Figure 14.1. We have, according to the deﬁnition of weighted path length: HuﬀmanCost(S) = 5 ∗ 1 + 2 ∗ 2 + 1 ∗ 4 + 1 ∗ 4 + 2 ∗ 3 = 23 The corresponding preﬁx code is: h(a) = 0, h(b) = 10, h(c) = 1100, h(d) = 1101, h(r) = 111. We can encode the original text abracadabra using the codes given by paths in the preﬁx tree. The coded text is then 01011101100011010101110, that is a word of length 23. If for example the initial code words of letters have length 5, we get the compression ratio 55/23 ≈ 2.4.

© 2005 by Chapman & Hall/CRC

14-4

14.2.1

Handbook of Data Structures and Applications O(n log n) Time Algorithm

The basic algorithm is the greedy algorithm given by Huﬀman. In this algorithm we can assume that two items of smallest weight are at the bottom of the tree and they are sons of a same node. The greedy approach in this case is to minimize the cost locally. Two smallest weight items are combined into a single package with weight equal to the sum of weights of these small items. Then we proceed recursively. The following observation is used. Observation Assume that the numbers in internal nodes are sums of weights of leaves in corresponding subtrees. Then the total weighted path length of the tree is the total sum of values in internal nodes. Due to the observation we have for |S| > 1: HuﬀmanCost(S) = HuﬀmanCost(S − {u, w}) + u + w, where u, w are two minimal elements of S. This implies the following algorithm, in which we assume that initially S is stored in a min-priority queue. The algorithm is presented below as a recursive function HuﬀmanCost(S) but it can be easily written without recursion. The algorithm computes only the total cost. THEOREM 14.1

Huﬀman algorithm constructs optimal tree in O(n log n) time

In an optimal tree we can exchange two items which are sons of a same father at a bottom level with two smallest weight items. This will not increase the cost of the tree. Hence there is an optimal tree with two smallest weight items being sons of a same node. This implies correctness of the algorithm. The complexity is O(n log n) since each operation in the priority queue takes O(log n) time and there are O(n) operations of Extract-Min.

Proof

function HuﬀmanCost(S) { Huﬀman algorithm: recursive version} { computes only the cost of minimum weighted tree } 1. 2. 3. 4.

if S contains only one element u then return 0; u = Extract Min(S); w = ExtractMin(S); insert(u+w, S); return HuﬀmanCost(S) +u+w

The algorithm in fact computes only the cost of Huﬀman tree, but the tree can be created on-line in the algorithm. Each time we combine two items we create their father and create links son-father. In the course of the algorithm we keep a forest (collection of trees). Eventually this becomes a single Huﬀman tree at the end.

14.2.2

Linear Time Algorithm for Presorted Sequence of Items

There is possible an algorithm using “simple” queues with constant time operations of inserting and deleting elements from the queue if the items are presorted.

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

14-5

THEOREM 14.2 If the weights are already sorted then the Huﬀman tree can be constructed in linear time.

Proof If we have sorted queues of remaining original items and remaining newly created items (packages) then it is easy to see that two smallest items can be chosen from among 4 items, two ﬁrst elements of each queue. This proves correctness.

Linear time follows from constant time costs of single queue operations. Linear-Time Algorithm { linear time computation of the cost for presorted items } 1. initialize empty queues Q, S; total cost = 0; 2. place original n weights into nondecreasing order into S; the smallest elements at the front of S; 3. while |Q| + |S| > 2 do { let u, w be the smallest elements chosen from the ﬁrst two elements of Q and of S; remove u, w from Q ∪ S; insert(u + w, Q); total cost = total cost + (u + w);} 4. return total cost

14.2.3

Relation between General Uniquely Decipherable Codes and Preﬁx-free Codes

It would seem that, for some weight sequences, in the class of uniquely decipherable codes there are possible codes which beat every Huﬀman (preﬁx-free) code. However it happens that preﬁx-free codes are optimal within the whole class of uniquely decipherable codes. It follows immediately from the next three lemmas. LEMMA 14.1 For each full (each internal node having exactly two sons) binary tree T with leaves 1 . . . n we have: n

2−levelT (i) = 1

i=1

Proof

Simple induction on n.

For each uniquely decipherable code S with word lengths 1 , 2 , . . . , k on the alphabet {0, 1} we have :

LEMMA 14.2

k i=1

© 2005 by Chapman & Hall/CRC

2−i ≤ 1

14-6

Proof

Handbook of Data Structures and Applications For a set W of words on the alphabet {0, 1} deﬁne: 2−|x| C(W ) = x∈W

We have to show that C(S) ≤ 1. Let us ﬁrst observe the following simple fact. Observation. If S is uniquely decipherable then C(S)n = C(S n ) for all n ≥ 1. The proof that C(S) ≤ 1 is now by contradiction, assume C(S) > 1. Let c be the length of the longest word in S. Observe that C(Σk ) = 1 for each k, C(S n ) ≤ C({x ∈ Σ∗ : 1 ≤ |x| ≤ cn }) = cn Denote q = C(S). Then we have: C(S)n = q n ≤ cn For q > 1 this inequality is not true for all n, since lim q n /(cn) = +∞ if q > 1. Therefore it should be q ≤ 1 and C(S) ≤ 1. This completes the proof. [Kraft’s inequality] There is a preﬁx code with word lengths 1 , 2 , . . . , k on the alphabet {0, 1} iﬀ k 2−i ≤ 1 (14.1) LEMMA 14.3

i=1

Proof It is enough to show how to construct such a code if the inequality holds. Assume the lengths are sorted in the increasing order. Assume we have a (potentially) inﬁnite full binary tree. We construct the next codeword by going top-down, starting from the root. We assign to the i-th codeword, for i = 1, 2, 3, . . . , k, the lexicographically ﬁrst path of length i , such that the bottom node of this path has not been visited before. It is illustrated in Figure 14.2. If the path does not exist then this means that in this moment we covered with paths a full binary tree, and the actual sum equals 1. But some other lengths remained, so it would be : k 2−i > 1 i=1

a contradiction. This proves that the construction of a preﬁx code works, so the corresponding preﬁx-free code covering all lengths exists. This completes the proof. The lemmas imply directly the following theorem. THEOREM 14.3 A uniquely decipherable code with prescribed word lengths exists iﬀ a preﬁx code with the same word lengths exists.

We remark that the problem of testing unique decipherability of a set of codewords is complete in nondeterministic logarithmic space, see [47].

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

14-7

l

1 l

2

l

3

FIGURE 14.2: Graphical illustration of constructing preﬁx-free code with prescribed lengths sequence satisfying Kraft inequality.

14.2.4

Huﬀman Codes and Entropy

The performance of Huﬀman codes is related to a measure of information of the source text, called the entropy (denoted by E) of the alphabet. Let wa be na /N , where na is the number of occurrences of a in a given text of length N . In this case the sequence S of weights wa n is normalized i=1 wi = 1. The quantity wa can be now viewed as the probability that letter a occurs at a given position in the text. This probability is assumed to be independent of the position. Then, the entropy of the alphabet according to wa ’s is deﬁned as E(A) = − wa log wa . a∈A

The entropy is expressed in bits (log is a base-two logarithm). It is a lower bound of the average length of the code words h(a), m(A) = wa .|h(a)|. a∈A

Moreover, Huﬀman codes give the best possible approximation of the entropy (among methods based on coding of the alphabet). This is summarized in the following theorem whose proof relies on the inequalities from Lemma 14.2. Assume the weight sequence A of weights is normalized. The total cost m(A) of any uniquely decipherable code for A is at least E(A), and we have E(A) ≤ HuﬀmanCost(A) ≤ E(A) + 1.

THEOREM 14.4

14.2.5

Huﬀman Algorithm for t-ary Trees

An important generalization of Huﬀman algorithm is to t-ary trees. Huﬀman algorithm generalizes to the construction of preﬁx codes on alphabet of size t > 2. The trie of the code is then an almost full t-ary tree. We say that t-ary tree is almost full if all internal nodes have exactly t sons, except possibly one node, which has less sons, in these case all of them should be leaves (let us call this one node a defect node). We perform similar algorithm to Huﬀman method for binary trees, except that each time we select t items (original or combined) of smallest weight.

© 2005 by Chapman & Hall/CRC

14-8

Handbook of Data Structures and Applications

There is one technical diﬃculty. Possibly we start by selecting a smaller number of items in the ﬁrst step. If we know t and the number of items then it is easy to calculate number q of sons of the defect node, for example if t = 3 and n = 8 then the defect node has two sons. It is easy to compute the number q of sons of the defect node due to the following simple fact. LEMMA 14.4

If T is a full t-ary tree with m leaves then m modulo (t − 1) = 1.

We start the algorithm by combining q smallest items. Later each time we combine exactly t values. To simplify the algorithm we can add the smallest possible number of dummy items of weigh zero to make the tree full t-ary tree.

14.3

Height Limited Huﬀman Trees

In this section only, for technical reason, we assume that the length of the path is the number of its vertices. For a sequence S of weights the total cost is changed by adding the sum of weights in S. Assume we have the same problem as in the case of Huﬀman trees with additional restriction that the height of the tree is limited by a given parameter L. A beautiful algorithm for this problem has been given by Larmore and Hirschberg, see [16].

14.3.1

Reduction to the Coin Collector Problem

The main component of the algorithm is the reduction to the following problem in which the crucial property play powers of two. We call a real number dyadic iﬀ it has a ﬁnite binary representation. Coin Collector problem: Input: A set I of m items and dyadic number X, each element of I has a width and a weight, where each width is a (possibly negative) power of two, and each weight is a positive real number. Output: CoinColl(I, X) - the minimum total weight of a subset S ⊆ I whose widths sum to X. The following trivial lemma plays important role in the reduction of height limited tree problem to the Coin Collector problem. LEMMA 14.5

Assume T is a full binary tree with n leaves, then

2−level T (v) = n + 1

v∈T

Assume we have Huﬀman coding problem with n items with the sequence of weights weights W = w1 , w2 , . . . , wn . We deﬁne an instance of the Coin Collector problem as follows: • IW = {(i, l) : i ∈ [1 . . . n], l ∈ [1, . . . L], • width(i, l) = 2−l , weight(i, l) = wi for each i, l • Xw = n + 1.

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length (3,2,1,4)

14-9

level 0

(3,0), (2,0), (1,0), (4,0)

level 1

(3,1), (2,1), (1,1), (4,1)

level 2

(3,2), (2,2), (1,2)

(3,2,1) 4 (2,1) 3

2

1

level 3

(3,2), (2,2), (1,2)

FIGURE 14.3: A Huﬀman tree T for the items 1, 2, 3, 4 of height limited by 4 and the corresponding solution to the Coin Collector problem. Each node of the tree can be treated as a package consisting of leaves in the corresponding subtree. Assume weight(i) = i. Then in the corresponding Coin Collector problem we have weight(i, h) = i, width(i, h) = 2−h .

The intuition behind this strange construction is to view nodes as packages consisting of of original items (elements in the leaves). The internal node v which is a package consisting of (leaves in its subtree) items i1 , i2 , . . . , ik can be treated as a set of coins (i1 , h), (i2 , h), . . . (ik , h), where h is the level of v, and weight(ij , h) = weight(ij ). The total weight of the set of coins is the cost of the Huﬀman tree. Example Figure 14.3 shows optimal Huﬀman tree for S = (1, 2, 3, 4) with height limited by 4, and the optimal solution to the corresponding Coin Collector problem. The sum of widths of the coins is 4+1, and the total weight is minimal. It is the same as the cost of the Huﬀman tree on the left, assuming that leaves are also contributing their weights (we scale cost by the sum of weights of S). Hirschberg and Larmore, see [16], have shown the following fact. LEMMA 14.6 The solution CoinColl(IW , XW ) to the Coin Collector Problem is the cost of the optimal L-height restricted Huﬀman tree for the sequence W of weights.

14.3.2

The Algorithm for the Coin Collector Problem

The height limited Huﬀman trees problem is thus reduced to the Coin Collector Problem. The crucial point in the solution of the latter problem is the fact that weights are powers of two. Denote MinWidth(X) to be the smallest power of two in binary representation of number X. For example MinWidth(12) = 4 since 12 = 8 + 4. Denote by MinItem(I) the item with the smallest width in I. If the items are sorted with respect to the weight then the Coin Collector problem can be solved in linear time (with respect to the total number |I| of coins given in the input).

LEMMA 14.7

© 2005 by Chapman & Hall/CRC

14-10

Handbook of Data Structures and Applications

The recursive algorithm for the Coin Collector problem is presented below as a recursive function CoinColl(I, X). There are several cases depending on the relation between the smallest width of the item and minimum power of two which constitutes the binary representation of X. In the course of the algorithm the set of weights shrinks as well as the size of X. The linear time implementation of the algorithm is given in [21]. Proof

function CC(I, X); {Coin Collector Problem} {compute nnimal weight of a subset of I of total width X x := MinItem(X); r := width(x); if r > MinWidth(X) then no solution exists else if r = MinWidth(X) then return CC(I − {x}, X − r) + weight(x) else if r < MinWidth(X) and there is only one item of width r then return CC(I − {x}, X) else let x, x be two items of smallest weight and width r, create new item y such that width(y) = 2r, weight(y) = weight(x) + weight(x ); return CC(I − {x, x } ∪ {y}, X)

The last two lemmas imply the following fact. The problem of the Huﬀman tree for n items with height limited by L can be solved in O(n · L) time.

THEOREM 14.5

Using complicated √ approach of the Least Weight Concave Subsequence the complexity has been reduced to n L log n + n log n in [1]. Another small improvement is by Schieber [49]. An eﬃcient approximation algorithm is given in [40–42]. The dynamic algorithm for Huﬀman trees is given in [50].

14.4

Optimal Binary Search Trees

Assume we have a sequence of 2n + 1 weights (nonnegative reals) α0 , β1 , α1 , β2 , . . . , αn−1 , βn , αn . Let Tree(α0 , β1 , α1 , β2 , . . . , αn−1 , βn , αn ) be the set of all full binary weighted trees with n internal nodes, where the i-th internal node (in the in-order) has the weight βi , and the i-th external node (the leaf, in the left-to-right order) has the weight αi . The in-order traversal results if we visit all nodes in a recursive way, ﬁrst the left subtree, then the root, and afterwards the right subtree. If T is a binary search tree then deﬁne the cost of T as follows: cost(T ) = levelT (v) · weight(v). v∈T

Let OP T (α0 , β1 , . . . , αn−1 , βn , αn ) be the set of trees Tree(α0 , β1 , . . . , αn−1 , βn , αn ) whose cost is minimal.

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

14-11

3

1

4 6

2

4

3 2

3

5 1

3 1

FIGURE 14.4: A binary search tree for the sequences: β = (β1 , β2 , . . . , β6 ) (1, 2, 3, 4, 5, 6), α = (α0 , α1 , . . . α6 ) = (3, 2, 3, 4, 1, 1, 3). We have cut(0, 6) = 3.

=

We use also terminology from [35]. Let K1 , . . . Kn be a sequence of n weighted items (keys), which are to be placed in a binary search tree. We are given 2n + 1 weights (probabilities): q0 , p1 , q1 , p2 , q2 , p3 , . . . , qn−1 , pn , qn where • pi is the probability that Ki is the search argument; • qi is the probability that the search argument lies between Ki and Ki+1 . The OBST problem is to construct an optimal binary search tree, the keys Ki ’s are to be stored in internal nodes of this binary search tree and in its external nodes special items are to be stored. The i-th special item Ki corresponds to all keys which are strictly between Ki and Ki+1 . The binary search tree is a full binary tree whose nodes are labeled by the keys. Using the abstract terminology introduced above the OBST problem consists of ﬁnding a tree T ∈ OP T (q0 , p1 , q1 , p2 , . . . , qn−1 , pn , qn ), see an example tree in Figure 14.4. Denote by obst(i, j) the set OP T (qi , pi+1 , qi+1 , . . . , qj−1 , pj , qj ). Let cost(i, j) be the cost of a tree in obst(i, j), for i < j, and cost(i, i) = qi . The sequence qi , pi+1 , qi+1 , . . . , qj−1 , pj , qj is here the subsequence of q0 , p1 , q1 , p2 , . . . , qn−1 , pn , qn , consisting of some number of consecutive elements which starts with qi and ends with qj . Let w(i, j) = qi + pi+1 + qi+1 + . . . + qj−1 + pj + qj . The dynamic programming approach to the computation of the OBST problem relies on the fact that the subtrees of an optimal tree are also optimal. If a tree T ∈ obst(i, j) contains in the root an item Kk then its left subtree is in obst(i, k − 1) and its right subtree is in obst(k, j). Moreover, when we join these two subtrees then the contribution of each node increases by one (as one level is added), so the increase is w(i, j). Hence the costs obey the following dynamic programming recurrences for i < j: cost(i, j) = min{cost(i, k − 1) + cost(k, j) + w(i, j) : i < k ≤ j }. Denote the smallest value of k which minimizes the above equation by cut(i, j). This is the ﬁrst point giving an optimal decomposition of obst(i, j) into two smaller (son) subtrees. Optimal binary search trees have the following crucial property (proved in [34], see the ﬁgure for graphical illustration) monotonicity property:

© 2005 by Chapman & Hall/CRC

i ≤ i ≤ j ≤ j =⇒ cut(i, j) ≤ cut(i , j ).

14-12

Handbook of Data Structures and Applications CUT(i,j)

CUT(i’,j’) j

i

i’

j’

FIGURE 14.5: Graphical illustration of the monotonicity property of cuts.

The property of monotonicity, the cuts and the quadratic algorithm for the OBST were ﬁrst given by Knuth. The general dynamic programming recurrences were treated by Yao [52], in the context of reducing cubic time to quadratic. THEOREM 14.6

Optimal binary search trees can be computed in O(n2 ) time.

Proof The values of cost(i, j) are computed by tabulating them in an array. Such tabulation of costs of smaller subproblems is the basis of the dynamic programming technique. We use the same name cost for this array. It can be computed in O(n3 ) time, by processing diagonal after diagonal, starting with the central diagonal. In case of optimal binary search trees this can be reduced to O(n2 ) using additional tabulated values of the cuts in table cut. The k-th diagonal consists of entries i, j such that j − i = k. If we have computed cuts for k-th diagonal then for (i, j) on the (k + 1)-th diagonal we know that

cut(i, j − 1) ≤ cut(i, j) ≤ cut(i + 1, j) Hence the total work on the (k + 1)-th diagonal is proportional to the sum of telescoping series: cut(1, k + 1) − cut(0, k) + cut(2, k + 2) − cut(1, k + 1)+ cut(3, k + 3) − cut(2, k + 2) + . . . cut(n − k, k) − cut(n − k − 1, k − 1), which is O(n). Summing over all diagonals gives quadratic total time to compute the tables of cuts and costs. Once the table cost(i, j) is computed then the construction of an optimal tree can be done in quadratic time by tracing back the values of cuts.

14.4.1

Approximately Optimal Binary Search Trees

We can attempt to reduce time complexity at the cost of slightly increased cost of the constructed tree. A common-sense approach would be to insert the keys in the order of decreasing frequencies. However this method occasionally can give quite bad trees. Another approach would be to choose the root so that the total weights of items in the left and right trees are as close as possible. However it is not so good in pessimistic sense. The combination of this methods can give quite satisfactory solutions and the resulting algorithm can be linear time, see [44]. Average subquadratic time has been given in [29].

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

14.5

14-13

Optimal Alphabetic Tree Problem

The alphabetic tree problem looks very similar to the Huﬀman problem, except that the leaves of the alphabetic tree (read left-to-right) should be in the same order as in the original input sequence. Similarly as in Huﬀman coding the binary tree must be full , i.e., each internal node must have exactly two sons. The main diﬃculty is that we cannot localize easily two items which are to be combined. Assume we have a sequence of n weighted items, where wi is the non-negative weight of the ith item. We write α = w1 . . . wn . The sequence will be changing in the course of the algorithm. An alphabetic tree over α is an ordered binary tree T with n leaves, where the ith leaf (in left-to-right order) corresponds to the ith item of The optimal alphabetic tree problem (OAT problem) is to ﬁnd an alphabetic tree of minimum cost. The Garsia-Wachs algorithm solves the alphabetic tree problem, it is a version of an earlier algorithm by Hu and Tucker, see [18]. The strangest part of the algorithm is that it permutes α, though the ﬁnal tree should have the order of leaves the same as the order of items in the original sequence. We adopt the convention that the items of α have unique names, and that these names are preserved when items are moved. When convenient to do so, we will assume that those names are the positions of items in the list, namely integers in [1 . . . n].

14.5.1

Computing the Cost of Optimal Alphabetic Tree

First we show how to compute only the cost of the whole tree, however this computation does not give automatically an optimal alphabetic tree, since we will be permuting the sequence of items. Each time we combine two adjacent items in the current permutation, however these items are not necessarily adjacent in the original sequence, so in any legal alphabetic tree they cannot be sons of a same father. The alphabetic tree is constructed by reducing the initial sequence of items to a shorter sequence in a manner similar to that of the Huﬀman algorithm, with one important diﬀerence. In the Huﬀman algorithm, the minimum pair of items are combined, because it can be shown that they are siblings in the optimal tree. If we could identify two adjacent items that are siblings in the optimal alphabetic tree, we could combine them and then proceed recursively. Unfortunately, there is no known way to identify such a pair. Even a minimal pair may not be siblings. Consider the weight sequence (8 7 7 8). The second and the third items are not siblings in any optimal alphabetic tree. Instead, the HT and GW algorithms, as well as the algorithms of [20, 22, 23, 46], operate by identifying a pair of items that have the same level in the optimal tree. These items are then combined into a single “package,” reducing the number of items by one. The details on how this process proceeds diﬀer in the diﬀerent algorithms. Deﬁne, for 1 ≤ i < n, the ith two-sum: TwoSum(i) = wi + wi+1 A pair of adjacent items (i, i + 1) is a locally minimal pair (or lmp for short) if TwoSum(i − 1) ≥ TwoSum(i) <

TwoSum(i) TwoSum(i + 1)

if if

i>1 i≤n−2

A locally minimal pair which is currently being processed is called the active pair.

© 2005 by Chapman & Hall/CRC

14-14

Handbook of Data Structures and Applications

The Operator Move. If w is any item in a list π of weighted items, deﬁne RightPos(w) to be the predecessor of the nearest right larger or equal neighbor of w. If w has no right larger or equal neighbor, deﬁne RightPos(w) to be |π| + 1. Let Move(w, π) be the operator that changes π by moving w w is inserted between positions RightPos(w) − 1 and RightPos(w). For example Move(7, (2, 5, 7, 2, 4, 9, 3, 4) = (2, 5, 2, 4, 7, 9, 3, 4) . function GW(π); {π is a sequence of names of items} {restricted version of the Garsia-Wachs algorithm} { computing only the cost of optimal alphabetic tree } if π = (v) (π consists of a single item) then return 0 else ﬁnd any locally minimal pair (u, w) of π create a new item x whose weight is weight(u) + weight(w); replace the pair u, v by the single item x; { the items u, v are removed } Move(v, π); return GW(π) + weight(v);

Correctness of the algorithm is a complicated issue. There are two simpliﬁed proofs, see [19, 30] and we refer to these papers for detailed proof. In [19] only the rightmost minimal pair can be processed each time, while [30] gives correctness of general algorithm when any minimal pair is processed, this is important in parallel computation, when we process simultaneously many such pairs. The proof in [30] shows that correctness is due to wellshaped bottom segments of optimal alphabetic trees, this is expressed as a structural theorem in [30] which gives more insight into the global structure of optimal alphabetic trees. For j > i + 1 denote by πi,j the sequence π in which elements i, i + 1 are moved just before left of j. THEOREM 14.7 [Correctness of the GW algorithm] Let (i, i + 1) be a locally minimal pair and RightPos(i, i + 1) = j, and let T be a tree over the sequence πi,j , optimal among all trees over πi,j in which i, i + 1 are siblings. Then there is an optimal alphabetic tree T over the original sequence π = (1, . . . n) such that T ∼ = T .

Correctness can be also expressed as equivalence between some classes of trees. Two binary trees T1 and T2 are said to be level equivalent (we write T1 ∼ = T2 ) if T1 , and T2 have the same set of leaves (possibly in a diﬀerent order) and level T1 = level T2 . Denote by OPT(i) the set of all alphabetic trees over the leaf-sequence (1, . . . n) which are optimal among trees in which i and i + 1 are at the same level. Assume the pair (i, i + 1) is locally minimal. Let OPTmoved (i) be the set of all alphabetic trees over the leaf-sequence πi,j which are optimal among all trees in which leaves i and i + 1 are at the same level, where j = RightPos(i, i + 1). Two sets of trees OPT and OPT are said to be level equivalent , written OPT ∼ = OPT , if, for each tree T ∈ OPT, there is a tree T ∈ OPT such that T ∼ = T , and vice versa.

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

14-15

THEOREM 14.8

Let (i, i + 1) be a locally minimal pair. Then (1) OPT(i) ∼ = OPTmoved (i) . (2) OPT(i) contains an optimal alphabetic tree T . (3) OPTmoved (i) contains a tree T with i, i + 1 as siblings.

14.5.2

Construction of Optimal Alphabetic Tree

The full Garsia-Wachs algorithm ﬁrst computes the level tree. This tree can be easily constructed in the function GW (π) when computing the cost of alphabetic tree. Each time we sum weights of two items (original or newly created) then we create new item which is their father with the weight being the sum of weights of sons. Once we have a level tree, the optimal alphabetic tree can be constructed easily in linear time. Figure 14.6, Figure 14.7, and Figure 14.8 show the process of construction the level tree and construction an optimal alphabetic tree knowing the levels of original items. Assume we know level of each leaf in an optimal alphabetic tree. Then the tree can be constructed in linear time.

LEMMA 14.8

Proof The levels give the “shape” of the tree, see Figure 14.8. Assume l1 , l2 , l3 , . . . , ln is the sequence of levels. We scan this sequence from left-to-right until we ﬁnd the ﬁrst two levels li , li+1 which are the same. Then we know that the leaves i and i + 1 are sons of a same father, hence we link these leaves to a newly created father and we remove these leaves, in the level sequence the pair li , li+1 is replaced by a single level li − 1. Next we check if li−1 = li − 1, if not we search to the right. We keep the scanned and newly created levels on the stack. The total time is linear.

There are possible many diﬀerent optimal alphabetic trees for the same sequence, Figure 14.9 shows an alternative optimal alphabetic tree for the same example sequence. THEOREM 14.9

Optimal alphabetic tree can be constructed in O(n log n) time.

We keep the array of levels of items. The array level is global of size (2n − 1). Its indices are the names of the nodes, i.e., the original n items and the (n − 1) nodes (“packages”) created during execution of the algorithm. The algorithm works in quadratic time, if implemented in a naive way. Using priority queues, it works in O(n log n) time. Correctness follows directly from Theorem 14.7.

Proof

14.5.3

Optimal Alphabetic Trees for Presorted Items

We have seen that Huﬀman trees can be constructed in linear time if the weights are presorted. Larmore and Przytycka, see [22] have shown that slightly weaker similar result holds for alphabetic trees as well: assume that weights of items are sortable in linear time, then the alphabetic tree problem can be solved in O(n log log n) time. Open problem Is it possible to construct alphabetic trees in linear time in the case when the weights are sortable in linear time?

© 2005 by Chapman & Hall/CRC

14-16

Handbook of Data Structures and Applications

12

80

80

12

13

11

10

13

3

3

4

4

5

5

9

9

8

8

7 21

7

25

12 80

12

13

5

9

7 3

80

12

13

9

8

7

13

9

21

80

12

8

7

8

21 12

7

9

5

8

7

12

80

12

10

12

12

13

4 36

25 10

25

25

7 3

21

4

21

5

10

7

12 9

25

12

12

7

21

15

10

21

21

3 80

25

4

15

13

10

4 15

3

25

12

7

12 5

25 10

12

3 12

21 12

5

80

10

7

4

8

25

13

25

21

15 8

7

12 9

5

7 3

FIGURE 14.6: The ﬁrst 7 phases of Garsia-Wachs algorithm.

© 2005 by Chapman & Hall/CRC

4

Trees with Minimum Weighted Path Length

14-17

36

80

21

15

21

9

25

12

12

7

8

46

25

5

10

4 61

46 21 12

25 10

13

7 3

80

12

12

36 15

13 8

25

21 12

7

9

5

7 3

4

107 61

46

80

21 12

25 10

12

36 13 8

25

21

15

12

7

9

5

7

187

3

4

107

80

61

46 21 12

25 10

12

36 13 8

7

25

21

15

12 9

5

7 3

4

FIGURE 14.7: The last phases of Garsia-Wachs algorithm. The ﬁnal tree is the level tree (but not alphabetic tree). The total cost (sum of values in internal nodes equal to 538) and the levels of original items are the same as in optimal alphabetic tree. The level sequence for the original sequence (80, 12, 10, 11, 13, 3, 4, 5, 9, 8, 7, 25) is: L = ( 1, 4, 4, 4, 4, 7, 7, 6, 5, 5, 3, ) .

© 2005 by Chapman & Hall/CRC

14-18

Handbook of Data Structures and Applications

1

80

2 3

25

4

10 12 11 13

5

9

6

7

8

5 3

7

4

80

12

10

25

11

13 9 3

4

8

7

5

FIGURE 14.8: The shape of the optimal tree given by the level sequence and the ﬁnal optimal alphabetic tree (cost=538) corresponding to this shape and to the weight sequence (80, 12, 10, 11, 13, 3, 4, 5, 9, 8, 7, 25).

80

25

12 9

13 10

11

3

4

5

8

7

FIGURE 14.9: An alternative optimal alphabetic tree (cost = 538) for the same weight sequence.

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

14.6

14-19

Optimal Lopsided Trees

The problem of ﬁnding optimal preﬁx-free codes for unequal letter costs consists of ﬁnding a minimal cost preﬁx-free code in which the encoding alphabet consists of unequal cost (length) letters, of lengths α and β, α ≤ β. We restrict ourselves here only to binary trees. The code is represented by a lopsided tree, in the same way as a Huﬀman tree represents the solution of the Huﬀman coding problem. Despite the similarity, the case of unequal letter costs is much harder then the classical Huﬀman problem; no polynomial time algorithm is known for general letter costs, despite a rich literature on the problem, e.g., [4, 15]. However there are known polynomial time algorithms when α and β are integer constants [15]. The problem of ﬁnding the minimum cost tree in this case was ﬁrst studied by Karp [27] in 1961 who solved the problem by reduction to integer linear programming, yielding an algorithm exponential in both n and β. Since that time there has been much work on various aspects of the problem such as; bounding the cost of the optimal tree, Altenkamp and Mehlhorn [2], Kapoor and Reingold [26] and Savari [8]; the restriction to the special case when all of the weights are equal, Cot [10], Perl Gary and Even [45], and Choi and Golin [9]; and approximating the optimal solution, Gilbert [13]. Despite all of these eﬀorts it is still, surprisingly, not even known whether the basic problem is polynomial-time solvable or in N P -complete. Golin and Rote [15] describe an O(nβ+2 )-time dynamic programming algorithm that constructs the tree in a top-down fashion. This has been improved using a diﬀerent approach (monotone-matrix concepts, e.g., the Monge property and the SMAWK algorithm [7]. THEOREM 14.10 [6] Optimal lopsided trees can be constructed in O(nβ ) time.

This is the the most eﬃcient known algorithm for the case of small β; in practice the letter costs are typically small (e.g., Morse codes). Recently a scheme of an eﬃcient approximating algorithm has been given. THEOREM 14.11 [24] There is a polynomial time approximation scheme for optimal lopsided trees.

14.7

Parallel Algorithms

As a model of parallel computations we choose the Parallel Random Access Machines (PRAM), see [14]. From the point of view of parallel complexity two parameters are of interest: parallel time (usually we require polylogarithmic time) and total work (time multiplied by the number of processors). The sequential greedy algorithm for Huﬀman coding is quite simple, but unfortunately it appears to be inherently sequential. Its parallel counterpart is much more complicated, and requires a new approach. The global structure of Huﬀman trees must be explored in depth. A full binary tree T is said to be left-justiﬁed if it satisﬁes the following properties:

© 2005 by Chapman & Hall/CRC

14-20

Handbook of Data Structures and Applications

1. the depths of the leaves are in non-increasing order from left to right, 2. let u be a left brother of v, and assume that the height of the subtree rooted at v is at least l. Then the tree rooted at u is full at level l, which means that u has 2l descendants at distance l. Basic property of left-justiﬁed trees

Let T be a left-justiﬁed binary tree. Then, T consists of one leftmost branch and the subtrees hanging from this branch have logarithmic height. Assume that the weights w1 , w2 , . . . , wn are pairwise distinct and in increasing order. Then, there is Huﬀman tree for (w1 , w2 , . . . , wn ) that is left-justiﬁed.

LEMMA 14.9

The left-justiﬁed trees are used together with eﬃcient algorithm for the CLWS problem (the Concave Least Weight Subsequence problem, to be deﬁned below) to show the following fact. [3] The parallel Huﬀman coding problem can be solved in polylogarithmic time with quadratic work.

THEOREM 14.12

Hirschberg and Larmore [16] deﬁne the Least Weight Subsequence (LWS) problem as follows: Given an integer n, and a real-valued weight function w(i, j) deﬁned for integers 0 ≤ i < j ≤ n, ﬁnd a sequence of integers α = (0 = α0 < α1 < . . . < αk−1 < αk = n) such k−1 that w(α) = i=0 w(αi , αi+1 ) is minimized. Thus, the LWS problem reduces trivially to the minimum path problem on a weighted directed acyclic graph. The Single Source LWS problem is to ﬁnd such a minimal sequence 0 = α0 < α1 < . . . < αk−1 < αk = m for all m ≤ n. The weight function is said to be concave if for all 0 ≤ i0 ≤ i1 < j0 ≤ j1 ≤ n, w(i0 , j0 ) + w(i1 , j1 ) ≤ w(i0 , j1 ) + w(i1 , j0 ).

(14.2)

The inequality (14.2) is also called the quadrangle inequality [52]. The LWS problem with the restriction that the weight function is concave is called the Concave Least Weight Subsequence (CLWS) problem. Hirschberg and Larmore [16] show that the LWS problem can be solved in O(n2 ) sequential time, while the CLWS problem can be solved in O(n log n) time. Wilber [51] gives an O(n)-time algorithm for the CLWS problem. In the parallel setting, the CLWS problem seems to be more diﬃcult. The best current polylogarithmic time algorithm for the CLWS problem uses concave matrix multiplication techniques and requires O(log2 n) time with n2 / log2 n processors. Larmore and Przytycka [37] have shown how to compute eﬃciently CLWS in sublinear time with the total work smaller than quadratic. Using this approach they showed the following fact (which has been later slightly improved [28, 39]. √ Optimal Huﬀman tree can be computed in O( n log n) time with linear number of processors.

THEOREM 14.13

Karpinski and Nekrich have shown an eﬃcient parallel algorithm which approximates optimal Huﬀman code, see [5].

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

14-21

Similar, but much more complicated algorithm works for alphabetic trees. Again the CLWS algorithm is the main tool. [23] Optimal alphabetic tree can be constructed in polylogarithmic time with quadratic number of processors.

THEOREM 14.14

In case of general binary search trees the situation is more diﬃcult. Polylogarithmic time algorithms need huge number of processors. However sublinear parallel time is easier. THEOREM 14.15 [48] [31] The OBST problem can be solved in (a) polylogarithmic time with O(n6 ) processors, (b) in sublinear time and quadratic total work.

References [1] Alok Aggarwal, Baruch Schieber, Takeshi Tokuyama: Finding a Minimum-Weight k-Link Path Graphs with the Concave Monge Property and Applications. Discrete & Computational Geometry 12: 263-280 (1994). [2] Doris Altenkamp and Kurt Mehlhorn, “Codes: Unequal Probabilities, Unequal Letter Costs,” J. Assoc. Comput. Mach. 27 (3) (July 1980), 412–427. [3] M. J. Atallah, S. R. Kosaraju, L. L. Larmore, G. L. Miller, and S-H. Teng. Constructing trees in parallel, Proc. 1st ACM Symposium on Parallel Algorithms and Architectures (1989), pp. 499–533. [4] Julia Abrahams, “Code and Parse Trees for Lossless Source Encoding,” Sequences ’97, (1997). [5] P. Berman, M. Karpinski, M. Nekrich, Approximating Huﬀman codes in parallel, Proc. 29th ICALP, LNCS vol. 2380, Springer, 2002, pp. 845-855. [6] P. Bradford, M. Golin, L. Larmore, W. Rytter, Optimal Preﬁx-Free Codes for Unequal Letter Costs and Dynamic Programming with the Monge Property, Journal of Algorithms, Vol. 42, No. 2, February 2002, p. 277-303. [7] A. Aggarwal, M. Klawe, S. Moran, P. Shor, and R. Wilber, Geometric applications of a matrix-searching algorithm, Algorithmica 2 (1987), pp. 195–208. [8] Serap A. Savari, “Some Notes on Varn Coding,” IEEE Transactions on Information Theory, 40 (1) (Jan. 1994), 181–186. [9] Siu-Ngan Choi and M. Golin, “Lopsided trees: Algorithms, Analyses and Applications,” Automata, Languages and Programming, Proceedings of the 23rd International Colloquium on Automata, Languages, and Programming (ICALP 96). [10] N. Cot, “A linear-time ordering procedure with applications to variable length encoding,” Proc. 8th Annual Princeton Conference on Information Sciences and Systems, (1974), pp. 460–463. [11] A. M. Garsia and M. L. Wachs, A New algorithm for minimal binary search trees, SIAM Journal of Computing 6 (1977), pp. 622–642. [12] T. C. Hu. A new proof of the T-C algorithm, SIAM Journal of Applied Mathematics 25 (1973), pp. 83–94. [13] E. N. Gilbert, “Coding with Digits of Unequal Costs,” IEEE Trans. Inform. Theory, 41 (1995). [14] A. Gibbons, W.Rytter, Eﬃcient parallel algorithms, Cambridge Univ. Press 1997. [15] M. Golin and G. Rote, “A Dynamic Programming Algorithm for Constructing Opti-

© 2005 by Chapman & Hall/CRC

14-22

[16]

[17] [18] [19] [20]

[21] [22]

[23]

[24]

Handbook of Data Structures and Applications mal Preﬁx-Free Codes for Unequal Letter Costs,” Proceedings of the 22nd International Colloquium on Automata Languages and Programming (ICALP ’95), (July 1995) 256-267. D. S. Hirschberg and L. L. Larmore, The Least weight subsequence problem, Proc. 26th IEEE Symp. on Foundations of Computer Science Portland Oregon (Oct. 1985), pp. 137–143. Reprinted in SIAM Journal on Computing 16 (1987), pp. 628– 638. D. A. Huﬀman. A Method for the constructing of minimum redundancy codes, Proc. IRE 40 (1952), pp. 1098–1101. T. C. Hu and A. C. Tucker, Optimal computer search trees and variable length alphabetic codes, SIAM Journal of Applied Mathematics 21 (1971), pp. 514–532. J. H. Kingston, A new proof of the Garsia-Wachs algorithm, Journal of Algorithms 9 (1988) pp. 129–136. M. M. Klawe and B. Mumey, Upper and Lower Bounds on Constructing Alphabetic Binary Trees, Proceedings of the 4 th ACM-SIAM Symposium on Discrete Algorithms (1993), pp. 185–193. L. L. Larmore and D. S. Hirschberg, A fast algorithm for optimal length–limited Huﬀman codes, Journal of the ACM 37 (1990), pp. 464–473. L. L. Larmore and T. M. Przytycka, The optimal alphabetic tree problem revisited, Proceedings of the 21 st International Colloquium, ICALP’94, Jerusalem, LNCS 820, Springer-Verlag, (1994), pp. 251–262. L. L. Larmore, T. M. Przytycka, and W. Rytter, Parallel construction of optimal alphabetic trees, Proceedings of the 5 th ACM Symposium on Parallel Algorithms and Architectures (1993), pp. 214–223. M. Golin and G. Rote, “A Dynamic Programming Algorithm for Constructing Optimal Preﬁx-Free Codes for Uneq ual Letter Costs,” Proceedings of the 22nd Inter-

national Colloquium on Automata Languages and Progr amming (ICALP ’95), [25] [26] [27] [28] [29]

[30]

[31] [32]

[33]

(July 1995) 256-267. Expanded version to appear in IEEE Trans. Inform. Theory. R. G¨ uttler, K. Mehlhorn and W. Schneider. Binary search trees: average and worst case behavior, Electron. Informationsverarb Kybernet, 16 (1980) pp. 41–61. Sanjiv Kapoor and Edward Reingold, “Optimum Lopsided Binary Trees,” Journal of the Association for Computing Machinery 36 (3) (July 1989), 573–590. R. M. Karp, “Minimum-Redundancy Coding for the Discrete Noiseless Channel,” IRE Transactions on Information Theory, 7 (1961) 27-39. M. Karpinski, L. Larmore, Yakov Nekrich, A work eﬃcient algorithm for the construction of length-limited Huﬀman codes, to appear in Parallel Processing Letters. M. Karpinski, L. Larmore and W. Rytter, Sequential and parallel subquadratic work constructions of approximately optimal binary search trees, the 7th ACM Symposium on Discrete Algorithms, SODA’96. Marek Karpinski, Lawrence L. Larmore, and Wojciech Rytter. Correctness of constructing optimal alphabetic trees revisited. Theoretical Computer Science, 180(12):309-324, 10 June 1997. M. Karpinski, W. Rytter, On a Sublinear Time Parallel Construction of Optimal Binary Search Trees, Parallel Processing Letters, Volume 8 - Number 3, 1998. D. G. Kirkpatrick and T. M. Przytycka, Parallel construction of binary trees with almost optimal weighted path length, Proc. 2nd Symp. on Parallel Algorithms and Architectures (1990). D. G. Kirkpatrick and T. M. Przytycka, An optimal parallel minimax tree algorithm, Proc. 2nd IEEE Symp. of Parallel and Distributed Processing (1990), pp. 293–300.

© 2005 by Chapman & Hall/CRC

Trees with Minimum Weighted Path Length

14-23

[34] D. E. Knuth, Optimum binary search trees, Acta Informatica 1 (1971) pp. 14–25. [35] D. E. Knuth. The Art of computer programming , Addison–Wesley (1973). [36] L. L. Larmore, and T. M. Przytycka, Parallel construction of trees with optimal weighted path length, Proc. 3rd ACM Symposium on Parallel Algorithms and Architectures (1991), pp. 71–80. [37] L. L. Larmore, and T. M. Przytycka, Constructing Huﬀman trees in parallel, SIAM J. Computing 24(6), (1995) pp. 1163-1169. [38] L.Larmore, W. Rytter, Optimal parallel algorithms for some dynamic programming problems, IPL 52 (1994) 31-34. [39] Ch. Levcopulos, T. Przytycka, A work-time trade-oﬀ in parallel computation of Huﬀman trees and concave least weight subsequence problem, Parallel Processing Letters 4(1-2) (1994) pp. 37-43. [40] Ruy Luiz Milidiu, Eduardo Laber, The warm-up algorithm:a Lagrangian construction of length limited Huﬀman codes, SIAM J. Comput. 30(5): 1405-1426 (2000). [41] Ruy Luiz Milidi, Eduardo Sany Laber: Linear Time Recognition of Optimal LRestricted Preﬁx Codes (Extended Abstract). LATIN 2000: 227-236. [42] Ruy Luiz Milidi, Eduardo Sany Laber: Bounding the Ineﬃciency of Length-Restricted Preﬁx Codes. Algorithmica 31(4): 513-529 (2001). [43] W. Rytter, Eﬃcient parallel computations for some dynamic programming problems, Theo. Comp. Sci. 59 (1988), pp. 297–307. [44] K. Mehlhorn, Data structures and algorithms, vol. 1, Springer 1984. [45] Y. Perl, M. R. Garey, and S. Even, “Eﬃcient generation of optimal preﬁx code: Equiprobable words using unequal cost letters,” Journal of the Association for Computing Machinery 22 (2) (April 1975), pp 202–214. [46] P. Ramanan, Testing the optimality of alphabetic trees, Theoretical Computer Science 93 (1992), pp. 279–301. [47] W. Rytter, The space complexity of the unique decipherability problem, IPL 16 (4) 1983. [48] Fast parallel computations for some dynamic programming problems, Theoretical Computer Science (1988). [49] Baruch Schieber, Computing a Minimum Weight k-Link Path in Graphs with the Concave Monge Property. 204-222. [50] J. S. Vitter, “Dynamic Huﬀman Coding,” ACM Trans. Math. Software 15 (June 1989), pp 158–167. [51] R. Wilber, The Concave least weight subsequence problem revisited, Journal of Algorithms 9 (1988), pp. 418–425. [52] F. F. Yao, Eﬃcient dynamic programming using quadrangle inequalities, Proceedings of the 12 th ACM Symposium on Theory of Computing (1980), pp. 429–435.

© 2005 by Chapman & Hall/CRC

15 B Trees 15.1 15.2 15.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Disk-Based Environment . . . . . . . . . . . . . . . . . . . . The B-tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-tree Deﬁnition B-tree Deletion

15.4

•

B-tree Query

•

B-tree Insertion

Donghui Zhang Northeastern University

15.1

•

The B+-tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-10 Copy-up and Push-up • B+-tree Query Insertion • B+-tree Deletion

15.5

15-1 15-2 15-3

•

B+-tree

Further Discussions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17 Eﬃciency Analysis • Why is the B+-tree Widely Accepted? • Bulk-Loading a B+-tree • Aggregation Query in a B+-tree

Introduction

We have seen binary search trees in Chapters 3 and 10. When data volume is large and does not ﬁt in memory, an extension of the binary search tree to disk-based environment is the B-tree, originally invented by Bayer and McCreight [1]. In fact, since the B-tree is always balanced (all leaf nodes appear at the same level), it is an extension of the balanced binary search tree. Since each disk access exchanges a whole block of information between memory and disk rather than a few bytes, a node of the B-tree is expanded to hold more than two child pointers, up to the block capacity. To guarantee worst-case performance, the B-tree requires that every node (except the root) has to be at least half full. An exact match query, insertion or deletion need to access O(logB n) nodes, where B is the page capacity in number of child pointers, and n is the number of objects. Nowadays, every database management system (see Chapter 60 for more on applications of data structures to database management systems) has implemented the B-tree or its variants. Since the invention of the B-tree, there have been many variations proposed. In particular, Knuth [4] deﬁned the B*-tree as a B-tree in which every node has to be at least 2/3 full (instead of just 1/2 full). If a page overﬂows during insertion, the B*-tree applies a local redistribution scheme to delay splitting the node till two another sibling node is also full. At this time, the two nodes are split into three. Perhaps the best variation of the B-tree is the B+-tree, whose idea was originally suggested by Knuth [4], but whose name was given by Comer [2]. (Before Comer, Knuth used the name B*-tree to represent both B*-tree and B+-tree.) In a B+-tree, every object stays at the leaf level. Update and query algorithms need to be modiﬁed from those of the original B-tree accordingly. The idea of the B-tree also motivates the design of many other disk-based index structures like the R-tree [3], the state-of-art spatial index structure (Chapter 21).

15-1

© 2005 by Chapman & Hall/CRC

15-2

Handbook of Data Structures and Applications

In this chapter, we describe the B-tree and B+-tree in more detail. In section 15.2, we brieﬂy describe the disk-based environment and we introduce some notations. The B-tree is described in section 15.3, while the B+-tree is described in section 15.4. Finally, in section 15.5 we further discuss some related issues.

15.2

The Disk-Based Environment

Most application software deal with data. For instance, a registration application may keep the name, address and social security number of all students. The data has to be stored somewhere. There are three levels of storage. The computer CPU deals directly with the primary storage, which means the main memory (as well as cache). While data stored at this level can be access quickly, we cannot store everything in memory for two reasons. First, memory is expensive. Second, memory is volatile, i.e. if there is a power failure, information stored in memory gets lost. The secondary storage stands for magnetic disks. Although it has slower access, it is less expensive and it is non-volatile. This satisﬁes most needs. For data which do not need to be accessed often, they can also be stored in the tertiary storage, e.g. tapes. Since the CPU does not deal with disk directly, in order for any piece of data to be accessed, it has to be read from disk to memory ﬁrst. Data is stored on disk in units called blocks or pages. Every disk access has to read/write one or multiple blocks. That is, even if we need to access a single integer stored in a disk block which contains thousands of integers, we need to read the whole block in. This tells us why internal memory data structures cannot be directly implemented as external-memory index structures. Consider the binary search tree as an example. Suppose we implement every node as a disk block. The storage would be very ineﬃcient. If a disk page is 8KB (=8192 bytes), while a node in the binary search tree is 16 bytes (four integers: a key, a value, and two child pointers), we know every page is only 0.2% full. To improve space eﬃciency, we should store multiple tree nodes in one disk page. However, the query and update will still be ineﬃcient. The query and update need to access O(log2 n) nodes, where n is the number of objects. Since it is possible that every node accessed is stored in a diﬀerent disk page, we need to access O(log2 n) disk pages. On the other hand, the B-tree query/update needs to access only O(logB n) disk pages, which is a big improvement. A typical value of B is 100. Even if there are as many as billions of objects, the height of a B-tree, logB n, will be at most 4 or 5. A fundamental question that the database research addresses is how to reduce the gap between memory and disk. That is, given a large amount of data, how to organize them on disk in such a way that they can eﬃciently be updated and retrieved. Here we measure eﬃciency by counting the total number of disk accesses we make. A disk access can be either a read or a write operation. Without going into details on how the data is organized on disk, let’s make a few assumptions. First, assume each disk page is identiﬁed by a number called its pageID. Second, given a pageID, there is a function DiskRead which reads the page into memory. Correspondingly, there is a DiskWrite function which writes the in-memory page onto disk. Third, we are provided two functions which allocate a new disk page and deallocate an existing disk page. The four functions are listed below. • DiskRead: given a pageID, read the corresponding disk page into memory and return the corresponding memory location. • DiskWrite: given the location of an in-memory page, write the page to disk.

© 2005 by Chapman & Hall/CRC

B Trees

15-3

• AllocatePage: ﬁnd an unoccupied pageID, allocate space for the page in memory and return its memory location. • DeallocatePage: given a pageID, mark the corresponding disk page as being unoccupied. In the actual implementation, we should utilize a memory buﬀer pool. When we need to access a page, we should ﬁrst check if it is already in the buﬀer pool, and we access the disk only when there is a buﬀer miss. Similarly, when we want to write a page out, we should write it to the buﬀer pool. An actual DiskWrite is performed under two circumstances: (a) The buﬀer pool is full and one page needs to be switched out of buﬀer. (b) The application program terminates. However, for our purposes we do not diﬀerentiate disk access and buﬀer pool access.

15.3

The B-tree

The problem which the B-tree aims to solve is: given a large collection of objects, each having a key and an value, design a disk-based index structure which eﬃciently supports query and update. Here the query that is of interest is the exact-match query: given a key k, locate the value of the object with key=k. The update can be either an insertion or a deletion. That is, insert a new object into the index, or delete from the index an object with a given key.

15.3.1

B-tree Deﬁnition

A B-tree is a tree structure where every node corresponds to a disk page and which satisﬁes the following properties: • A node (leaf or index) x has a value x.num as the number of objects stored in x. It also stores the list of x.num objects in increasing key order. The key and value of the ith object (1 ≤ i ≤ x.num) are represented as x.key[i] and x.value[i], respectively. • Every leaf node has the same depth. • An index node x stores, besides x.num objects, x.num+1 child pointers. Here each child pointer is a pageID of the corresponding child node. The ith child pointer is denoted as x.child[i]. It corresponds to a key range (x.key[i − 1], x.key[i]). This means that in the ith sub-tree, any object key must be larger than x.key[i − 1] and smaller than x.key[i]. For instance, in the sub-tree referenced by x.child[1], the object keys are smaller than x.key[1]. In the sub-tree referenced by x.child[2], the objects keys are between x.key[1] and x.key[2], and so on. • Every node except the root node has to be at least half full. That is, suppose an index node can hold up to 2B child pointers (besides, of course, 2B-1 objects), then any index node except the root must have at least B child pointers. A leaf node can hold more objects, since no child pointer needs to be stored. However, for simplicity we assume a leaf node holds between B and 2B objects. • If the root node is an index node, it must have at least two children. A special case of the B-tree is when B = 2. Here every index node must have 2 or 3 or 4 child pointers. This special case is called the 2-3-4 tree. Figure 15.1 shows an example of a B-tree. In particular, it’s a 2-3-4 tree.

© 2005 by Chapman & Hall/CRC

15-4

Handbook of Data Structures and Applications A 25 B 6 D 1

3

E 4

5

7

8

C 10 16 F 11 13

60 G 17 19

H

I

28 31 33

69 90

FIGURE 15.1: An example of a B-tree.

In the ﬁgure, every index node contains between 2 and 4 child pointers, and every leaf node contains between 2 and 4 objects. The root node A is an index node. Currently it has one object with key=25 and two child pointers. In the left sub-tree, every object has key<25. In the right sub-tree, every object has key>25. Every leaf node (D through I) are located at the same depth: their distance to A is 2. Currently, there are two pages which are full: an index node B and a leaf node D.

15.3.2

B-tree Query

To ﬁnd the value of an object with key=k, we call the Query algorithm given below. The parameters are the tree root pageID and the search key k. The algorithm works as follows. It follows (at most) a single path from root to leaf. At each index node along the path, there can be at most one sub-tree whose key range contains k. A recursive call on that sub-tree is performed (step 2c). Eventually, we reach a leaf node (step 3a). If there exists an object in the node with key=k, the algorithm returns the value of the object. Otherwise, the object does not exist in the tree and N U LL is returned. Since the index nodes of the B-tree also stores objects, it is possible that the object with key=k is found in an index node. In this case, the algorithm returns the object value without going down to the next level (step 2a). Algorithm Query(pageID, k) Input: pageID of a B-tree node, a key k to be searched. Output: value of the object with key= k; N U LL if non-exist. 1. x = DiskRead(pageID). 2. if x is an index node (a) If there is an object o in x s.t. o.key = k, return o.value. (b) Find the child pointer x.child[i] whose key range contains k. (c) return Query(x.child[i], k). 3. else (a) If there is an object o in x s.t. o.key = k, return o.value. Otherwise, return N U LL. 4. end if As an example, Figure 15.2 shows how to perform a search query for k = 13. At node A, we should follow the left sub-tree since k < 25. At node B, we should follow the third sub-tree since 10 < k < 16. Now we reach a leaf node F . An object with key=13 is found in the node.

© 2005 by Chapman & Hall/CRC

B Trees

15-5 A 25 B 6 D 1

3

E 4

5

7

8

C 10 16 F 11 13

60 G 17 19

H

I

28 31 33

69 90

FIGURE 15.2: Query processing in a B-tree. If the query wants to search for k = 12, we still examine the three nodes A, B, F . This time, no object with key=12 is found in F , and thus the algorithm returns N U LL. If the search key is 10 instead, the algorithm only examines node A and B. Since in node B such an object is found, the algorithm stops there. Notice that in the Query algorithm, only DiskRead function is called. The other three functions, e.g. DiskWrite are not needed as the algorithm does not modify the B-tree. Since the query algorithm examines a single path from root to leaf, the complexity of the algorithm in number of I/Os is O(logB n), where n is the number of objects.

15.3.3

B-tree Insertion

To insert a new object with key k and value v into the index, we call the Insert algorithm given below. Algorithm Insert(root, k, v) Input: root pageID of a B-tree, the key k and the value v of a new object. Prerequisite: The object does not exist in the tree. Action: Insert the new object into the B-tree. 1. x = DiskRead(root). 2. if x is full (a) y = AllocateP age(), z = AllocateP age(). (b) Locate the middle object oi stored in x. Move the objects to the left of oi into y. Move the objects to the right of oi into z. If x is an index page, also move the child pointers accordingly. (c) x.child[1] = y.pageID, x.child[2] = z.pageID. (d) DiskW rite(x), DiskW rite(y), DiskW rite(z). 3. end if 4. InsertN otF ull(x, k, v). Basically, the algorithm makes sure that root page is not currently full, and then it calls the InsertNotFull function to insert the object into the tree. If the root page x is full, the algorithm will split it into two nodes y and z, and node x will be promoted to a higher level, thus increasing the height of the tree. This scenario is illustrated in Figure 15.3. Node x is a full root page. It contains three objects and four child pointers. If we try to insert some record into the tree, the root node is split into two nodes y and z. Originally, x contains x.num = 3 objects. The left object (key=6) is moved to a new node y. The right object (key=16) is moved to a new node z.

© 2005 by Chapman & Hall/CRC

15-6

Handbook of Data Structures and Applications

x 10

y

x 6 D

10 16 E

F

z

6 G

D

16 E

F

G

FIGURE 15.3: Splitting the root node increases the height of the tree.

The middle object (key=10) remains in x. Correspondingly, the child pointers D, E, F , G are also moved. Now, x contains only one object (key=10). We make it as the new root, and make y and z be the two children of it. To insert an object into a sub-tree rooted by a non-full node x, the following algorithm InsertNotFull is used. Algorithm InsertNotFull(x, k, v) Input: an in-memory page x of a B-tree, the key k and the value v of a new object. Prerequisite: page x is not full. Action: Insert the new object into the sub-tree rooted by x. 1. if x is a leaf page (a) Insert the new object into x, keeping objects in sorted order. (b) DiskW rite(x). 2. else (a) Find the child pointer x.child[i] whose key range contains k. (b) w = DiskRead(x.child[i]). (c) if w is full i. y = AllocateP age(). ii. Locate the middle object oj stored in w. Move the objects to the right of oj into y. If w is an index page, also move the child pointers accordingly. iii. Move oj into x. Accordingly, add a child pointer in x (to the right of oj ) pointing to y. iv. DiskW rite(x), DiskW rite(y), DiskW rite(w). v. If k < oj .key, call InsertN otF ull(w, k, v); otherwise, call InsertN otF ull(y, k, v). (d) else InsertN otF ull(w, k, v). (e) end if 3. end if Algorithm InsertNotFull examines a single path from root to leaf, and eventually insert the object into some leaf page. At each level, the algorithm follows the child pointer whose key range contains the key of the new object (step 2a). If no node along the path is full, the algorithm recursively calls itself on each of these nodes (step 2d) till the leaf level, where the object is inserted into the leaf node (step 1).

© 2005 by Chapman & Hall/CRC

B Trees

15-7

Consider the other case when some node w along the path is full (step 2c). The node is ﬁrst split into two (w and y). The right half of the objects from w are moved to y, while the middle object is pushed into the parent node. After the split, the key range of either w or y, but not both, contains the key of the new object. A recursive call is performed on the correct node. As an example, consider inserting an object with key=14 into the B-tree of Figure 15.2. The result is shown in Figure 15.4. The child pointers that are followed are thick. When we examine the root node A, we follow the child pointer to B. Since B is full, we ﬁrst split it into two, by moving the right half of the objects (only one object in our case, with key=16) into a new node B . The child pointers to F and G are moved as well. Further, the previous middle object in B (key=10) is moved to the parent node A. A new child pointer to B is also generated in A. Now, since the key of the new object is 14, which is bigger than 10, we recursively call the algorithm on B . At this node, since 14 < 16, we recursively call the algorithm on node F . Since F is a leaf node, the algorithm ﬁnishes by inserting the new object into F . The accessed disk pages are shown as shadowed. A

10 25 B

B’’

6 D 1

3

E 4

5

7

8

C

16 F 11 13

60 G

14

17 19

H

I

28 31 33

69 90

FIGURE 15.4: Inserting an object with key=14 into the B-tree of Figure 15.2 Since node B is full, it is split into two (B and B ). The object is recursively inserted into the sub-tree rooted by B . At the lowest level, it is stored in node F .

15.3.4

B-tree Deletion

This section describes the Delete algorithm which is used to delete an object with key=k from the B-tree. It is a recursive algorithm. It takes (besides k) as parameter a tree node, and it will perform deletion in the sub-tree rooted by that node. We know that there is a single path from the root node to the node x that contains k. The Delete algorithm examines this path. Along the path, at each level when we examine node x, we ﬁrst make sure that x has at least one more element than half full (except the case when x is the root). The reasoning behind this is that in order to delete an element from the sub-tree rooted by x, the number of element stored in x can be reduced at most by one. If x has one more element than half full (minimum occupancy), it can be guaranteed that x will not underﬂow. We distinguish three cases: 1. x is a leaf node; 2. x is an index node which contains an object with key=k; 3. x is an index node which does not contain an object with key=k. We ﬁrst describe the Delete algorithm and then discuss the three cases in more detail.

© 2005 by Chapman & Hall/CRC

15-8

Handbook of Data Structures and Applications

Algorithm Delete(x, k) Input: an in-memory node x of a B-tree, the key k to be deleted. Prerequisite: an object with key=k exists in the sub-tree rooted by x. Action: Delete the object from the sub-tree rooted by x. 1. if x is a leaf page (a) Delete the object with key=k from x. (b) DiskW rite(x). 2. else if x does not contain the object with key=k (a) Locate the child x.child[i] whose key range contains k. (b) y = DiskRead(x.child[i]). (c) if y is exactly half full i. If the sibling node z immediate to the left (right) of y has at least one more object than minimally required, add one more object to y by moving x.key[i] from x to y and move that last (ﬁrst) object from z to x. If y is an index node, the last (ﬁrst) child pointer in z is also moved to y. ii. Otherwise, any immediate sibling of y is exactly half full. Merge y with an immediate sibling. end if (d) Delete(y, k). 3. else (a) If the child y that precedes k in x has at least one more object than minimally required, ﬁnd the predecessor k of k in the sub-tree rooted by y, recursively delete k from the sub-tree and replace k with k in x. (b) Otherwise, y is exactly half full. We check the child z that immediately follows k in x. If z has at least one more object than minimally required, ﬁnd the successor k of k in the sub-tree rooted by z, recursively delete k from the sub-tree and replace k with k in x. (c) Otherwise, both y and z are half full. Merge them into one node and push k down to the new node as well. Recursively delete k from this new node. 4. end if Along the search path from the root to the node containing the object to be deleted, for each node x we encounter, there are three cases. The simplest scenario is when x is a leaf node (step 1 of the algorithm). In this case, the object is deleted from the node and the algorithm returns. Note that there is no need to handle underﬂow. The reason is: if the leaf node is root, there is only one node in the tree and it is ﬁne if it has only a few objects; otherwise, the previous recursive step has already guaranteed that x has at least one more object than minimally required. Steps 2 and 3 of the algorithm correspond to two diﬀerent cases of dealing with an index node. For step 2, the index node x does not contain the object with key=k. Thus there exists a child node y whose key range contains k. After we read the child node into memory (step 2b), we will recursively call the Delete algorithm on the sub-tree rooted by y (step 2d).

© 2005 by Chapman & Hall/CRC

B Trees

15-9

However, before we do that, step 2(c) of the algorithm makes sure that y contains at least one more object than half full. Suppose we want to delete 5 from the B-tree shown in Figure 15.2. When we are examining the root node A, we see that child node B should be followed next. Since B has two more objects than half full, the recursion goes to node B. In turn, since D has two more objects than minimum occupancy, the recursion goes to node D, where the object can be removed. Let’s examine another example. Still from the B+-tree shown in Figure 15.2, suppose we want to delete 33. The algorithm ﬁnds that the child node y = C is half full. One more object needs to be incorporated into node C before a recursive call on C is performed. There are two sub-cases. The ﬁrst sub-case is when one immediate sibling z of node y has at least one more object than minimally required. This case corresponds to step 2(c)i of the algorithm. To handle this case, we drag one object down from x to y, and we push one object from the sibling node up to x. As an example, the deletion of object 33 is shown in Figure 15.5. A

16 B 6 D 1

3

E 4

5

7

8

C

25 60

10 F 11 13

G 17 19

H

I

28 31 33

69 90

FIGURE 15.5: Illustration of step 2(c)i of the Delete algorithm. Deleting an object with key=33 from the B-tree of Figure 15.2. At node A, we examine the right child. Since node C only had one object before, a new object was added to it in the following way: the object with key=25 is moved from A to C, and the object with key=16 is moved from B to A. Also, the child pointer pointing to G is moved from B to C.

Another sub-case is when all immediate siblings of y are exactly half full. In this case, we merge y with one sibling. In our 2-3-4-tree example, an index node which is half full contains one object. If we merge two such nodes together, we also drag an object from the parent node of them down to the merged node. The node will then contain three objects, which is full but does not overﬂow. For instance, suppose we want to delete object 31 from Figure 15.5. When we are examining node x = C, we see that we need to recursively delete in the child node y = H. Now, both immediate siblings of H are exactly half full. So we need to merge H with a sibling, say G. Besides moving the remaining object 28 from H to G, we also should drag object 25 from the parent node C to G. The ﬁgure is omitted for this case. The third case is that node x is an index node which contains the object to be deleted. Step 3 of algorithm Delete corresponds to this scenario. We cannot simply delete the object from x, because we also need to decrement the number of child pointers by one. In Figure 15.5, suppose we want to delete object with key=25, which is stored in index node C. We cannot simply remove the object, since C would have one object but three child pointers left. Now, if child node G immediately to the left of key 25 had three or more objects, the algorithm would execute step 3(a) and move the last object from G into C to ﬁll in the space of the deleted object. Step 3(b) is a symmetric step which shows that we can move an object from the right sub-tree.

© 2005 by Chapman & Hall/CRC

15-10

Handbook of Data Structures and Applications A 16 B 6 D 1

3

C

E 4

5

7

25 60

10 F

8

G

11 13

H

17 19

I

28 31 28 31

69 90

A 16 B 6 D 1

3

C

E 4

5

7

60

10

8

G

F 11 13

17 19 28 31

I 69 90

FIGURE 15.6: Illustration of step 3(c) of the Delete algorithm. Deleting an object with key=25 from the B-tree of Figure 15.5. At node A, we examine the right child. We see that node C contains the object with key=25. We cannot move an object up from a child node of C, since both children G and H (around key 25) are exactly half full. The algorithm merges these two nodes into one, by moving objects 28 and 31 from H to G and then deleting H. Node C loses an object (key=25) and a child pointer (to H).

However, in our case, both child nodes G and H are half full and thus cannot contribute an object. Step 3(c) of the algorithm corresponds to this case. As shown in Figure 15.6, the two nodes are merged into one.

15.4

The B+-tree

The most well-know variation of the B-tree is the B+-tree. There are two major diﬀerences from the B-tree. First, all objects in the B+-tree are kept in leaf nodes. Second, all leaf nodes are linked together as a double-linked list. The structure of the B+-tree looks quite similar to the B-tree. Thus we omit the details. We do point out that in an index node of a B+-tree, diﬀerent from the B-tree, we do not store object values. We still store object keys, though. However, since all objects are stored in the leaf level, the keys stored in index nodes act as routers, as they direct the search algorithm to go to the correct child node at each level.

15.4.1

Copy-up and Push-up

One may wonder where the routers in the index nodes come from. To understand this, let’s look at an example. Initially, the B+-tree has a single node which is a leaf node. After 2B insertions, the root node becomes full. In Figure 15.7(a), if we try to insert an object to the node A when it is already full, it temporarily overﬂows. To handle the overﬂow, the B+-tree will split the node into two nodes A and B. Furthermore, a new node C is generated, which is the new root of the tree. The ﬁrst key in leaf node B is copied up to C. The result B+-tree is shown in Figure 15.7(b).

© 2005 by Chapman & Hall/CRC

B Trees

15-11 C 40 A

A

6* 12* 40* 42* 51*

B

6* 12*

(a) a temporarily overflowing leaf node

40* 42* 51*

(b) split the node by copying the middle key to an upper level

FIGURE 15.7: Illustration of a leaf-node split in the B+-tree. The middle key 40 (same as the ﬁrst key in the right node) is copied up to the parent node.

We point out that a key in an index node may be validly replaced by some other keys, unlike in a leaf node. For instance, in node C of Figure 15.7(b), we can replace the key 40 to 35. As long as it is smaller than all keys in the left sub-tree and bigger than or equal to all keys in the right sub-tree, it is ﬁne. To emphasize the fact that the keys in a index node are diﬀerent from the keys in a leaf node (a key in an index node is not a real object), in the B+-tree ﬁgures we will attach a (*) to each key in a leaf node. H 51 C

C

40 51 72 81 A

B

D

E

G 72 81

40 F

(a) a temporarily overflowing index node

A

B

D

E

F

(b) split the node by pushing the middle key to an upper leve

FIGURE 15.8: Illustration of an index-node split in the B+-tree. The middle key 51 is pushed up to the parent node.

As a comparison, consider the split of an index node. In Figure 15.8(a), the index node C temporarily overﬂows. It is split into two, C and G. Since before the split, C was the tree root, a new root node H is generated. See Figure 15.8(b). Here the middle key 51 in the original node C is pushed up to the parent node.

15.4.2

B+-tree Query

As in the B-tree, the B+-tree supports the exact-match query which ﬁnds the object with a given key. Furthermore, the B+-tree can eﬃciently support the range query, which ﬁnds the objects whose keys are in a given range. To perform the exact-match query, the B+-tree follows a single path from root to leaf. In the root node, there is a single child pointer whose key range contains the key to be searched for. If we follow the child pointer to the corresponding child node, inside the child node there is also a single child pointer whose key range contains the object to be searched for. Eventually, we reach a leaf node. The object to be searched, if it exists, must be located in this node. As an example, Figure 15.9 shows the search path if we search key=42.

© 2005 by Chapman & Hall/CRC

15-12

Handbook of Data Structures and Applications H 51 C

G

40 A

B

6* 12*

40* 42*

D

72 81 E

51* 53* 56* 62*

F

72* 75* 76*

81* 82* 90* 97*

FIGURE 15.9: Illustration of the exact-match query algorithm in the B+-tree. To search for an object with key=42, nodes H, C and B are examined.

Beside the exact-match query, the B+-tree also supports the range query. That is, ﬁnd all objects whose keys belong to a range R. In order to do so, all the leaf nodes of a B+-tree are linked together. If we want to search for all objects whose keys are in the range R =[low, high], we perform an exact match query for key=low. This leads us to a leaf node l. We examine all objects in l, and then we follow the sibling link to the next leaf node, and so on. The algorithm stops when an object with key> high is met. An example is shown in Figure 15.10. H 51 C

G

40 A

B

6* 12*

40* 42*

D 51* 53* 56* 62*

72 81 E 72* 75* 76*

F 81* 82* 90* 97*

FIGURE 15.10: Illustration of the range query algorithm in the B+-tree. To search for all objects with keys in the range [42,75], the ﬁrst step is to follow a path from root to leaf to ﬁnd key 42 (H, C and B are examined). The second step is to follow the right-sibling pointers between leaf nodes and examine D, E. The algorithm stops at E as an object with key=76 is found.

15.4.3

B+-tree Insertion

Since all objects in the B+-tree are located at the leaf level, the insertion algorithm of the B+-tree is actually easier than that in the B-tree. We basically follow the exact-match query to ﬁnd the leaf node which should contain the object if it were in the tree. Then we insert the object into the leaf node. What needs to be taken care of is when the leaf node overﬂows and is split into two. In this case, a key and a child pointer are inserted into the parent node. This may in turn cause the parent node to overﬂow, and so on. In the worst case, all nodes along the insertion path are split. If the root node splits into two, the height of the tree increases by one. The insertion algorithm is given below.

© 2005 by Chapman & Hall/CRC

B Trees

15-13

Algorithm Insert(root, k, v) Input: the root pageID of a B+-tree, the key k and the value v of a new object. Prerequisite: the object with key=k does not exist in the tree. Action: Insert the new object into the B+-tree. 1. Starting with the root node, perform an exact-match for key=k till a leaf node. Let the search path be x1 , x2 , . . . , xh , where x1 is the root node, xh is the leaf node where the new object should be inserted into, and xi is the parent node of xi+1 where 1 ≤ i ≤ h-1. 2. Insert the new object with key=k and value=v into xh . 3. Let i = h. while xi overﬂows (a) Split xi into two nodes, by moving the larger half of the keys into a new node xi . If xi is a leaf node, link xi into the double-linked list among leaf nodes. (b) Identify a key kk to be inserted into the parent level along with the child pointer pointing to xi . The choice of kk depends on the type of node xi . If xi is a leaf node, we need to perform Copy-up. That is, the smallest key in xi is copied as kk to the parent level. On the other hand, if xi is an index node, we need to perform Push-up. This means the smallest key in xi is removed from xi and then stored as kk in the parent node. (c) if i == 1 /* the root node overﬂows */ i. Create a new index node as the new root. In the new root, store one key=kk and two child pointers to xi and xi . ii. return (d) else i. Insert a key kk and a child pointer pointing to xi into node xi−1 . ii. i = i − 1. (e) end if end while As an example, Figure 15.11 shows how to insert an object with key=60 into the B+-tree shown in Figure 15.9.

15.4.4

B+-tree Deletion

To delete an object from the B+-tree, we ﬁrst examine a single path from root to the leaf node containing the object. Then we remove the object from the node. At this point, if the node is at least half full, the algorithm returns. Otherwise, the algorithm tries to re-distribute objects between a sibling node and the underﬂowing node. If redistribution is not possible, the underﬂowing node is merged with a sibling. Algorithm Delete(root, k) Input: the root pageID of a B+-tree, the key k of the object to be deleted. Prerequisite: the object with key=k exists in the tree. Action: Delete the object with key=k from the B+-tree.

© 2005 by Chapman & Hall/CRC

15-14

Handbook of Data Structures and Applications H 51 C

G

40 A

B

6* 12*

40* 42*

56 72 81

D

E

51* 53*

F

72* 75* 76*

81* 82* 90* 97*

D’ D

56* 60* 62*

E

FIGURE 15.11: After inserting an object with key=60 into the B+-tree shown in Figure 15.9. Leaf node D splits into two. The middle key 56 is copied up to the parent node G. 1. Starting with the root node, perform an exact-match for key=k. Let the search path be x1 , x2 , . . . , xh , where x1 is the root node, xh is the leaf node that contains the object with key=k, and xi is the parent node of xi+1 . (1 ≤ i ≤ h-1) 2. Delete the object with key=k from xh . 3. If h == 1, return. This is because the tree has only one node which is the root node, and we do not care whether a root node underﬂows or not. 4. Let i = h. while xi underﬂows (a) if an immediate sibling node s of xi has at least one more entry than minimum occupancy i. Re-distribute entries evenly between s and xi . ii. Corresponding to the re-distribution, a key kk in the parent node xi−1 needs to be modiﬁed. If xi is an index node, kk is dragged down to xi and a key from s is pushed up to ﬁll in the place of kk. Otherwise, kk is simply replaced by a key in s. iii. return (b) else i. Merge xi with a sibling node s. Delete the corresponding child pointer in xi−1 . ii. If xi is an index node, drag the key in xi−1 , which previously divides xi and s, into the new node xi . Otherwise, delete that key in xi−1 . iii. i = i − 1. (c) end if end while Step 1 of the algorithm follows a single path from root to leaf to ﬁnd the object to be deleted. Step 2 deletes the object. The algorithm will ﬁnish at this point if any of the following two conditions hold. One, if the tree has a single node (step 3). Two, the leaf node is at least half full after the deletion (the while loop of step 4 is skipped).

© 2005 by Chapman & Hall/CRC

B Trees

15-15

As an example, suppose we delete object 56 and then 62 from the B+-tree shown in Figure 15.9. The deletions go to the same leaf node D, where no underﬂow occurs. The result is shown in Figure 15.12. H 51 C

G

40 A

B

6* 12*

40* 42*

D

72 81 E

51* 53* 56* 62*

F

72* 75* 76*

81* 82* 90* 97*

FIGURE 15.12: After deleting keys 56 and 62 from the B+-tree of Figure 15.9. Both keys are deleted from leaf node D, which still satisﬁes the minimum occupancy.

Now, let’s try to delete key 53 from Figure 15.12. This time D underﬂows. Step 4 of the Delete algorithm handles underﬂows. In general, when a node xi underﬂows, the algorithm tries to borrow some entries from a sibling node s, as described in step 4(a). Note that we could borrow just one entry to avoid underﬂow in xi . However, this is not good because next time we delete something from xi , it will underﬂow again. Instead, the algorithm redistribute entries evenly between xi and s. Assume xi has B − 1 objects and s has B + k objects, where k ∈ [1..B]. After redistribution, both xi and s will have B + (k − 1)/2 objects. Thus xi can take another (k − 1)/2 deletions before another underﬂow occurs. H 51 C

G

40 A 6* 12*

B 40* 42*

D 51*

75 81 E

72*

75* 76*

F 81* 82* 90* 97*

FIGURE 15.13: After deleting keys 53 from Figure 15.12. Objects in D and E are redistributed. A key in G is modiﬁed.

In our example, to delete key 53 from node D, we re-distribute objects in D and E, by moving 72* into D. As discussed in step 4(a)ii of the algorithm, we also needs to modify a key in the parent node G. In our case, since D is a leaf node, we simply replace the key 72 by 75 in node G. Here 75 is the smallest key in E. The result after the redistribution is shown in Figure 15.13. As a comparison, consider the hypothetical case when D were an index node. In this case, we would drag down the key 72 from G to D and push up a key from E to G. Let’s proceed the example further by deleting object 72 from the tree in Figure 15.13. Now, the node D underﬂows, and redistribution is not possible (since E, the only immediate sibling of D, is exactly half full). Step 4(b) of the Delete algorithm tells us to merge D and

© 2005 by Chapman & Hall/CRC

15-16

Handbook of Data Structures and Applications

E together. Correspondingly, a key and a child pointer need to be deleted from the parent node G. Since D is a leaf node, we simply delete the key 75 and the child pointer from G. The result is shown in Figure 15.14. As a comparison, imagine D were an index node. We would still remove key 75 and the child pointer from G, but we would keep the key 75 in node D. H 51 C

G

40 A

B

6* 12*

D

40* 42*

51*

75 81 E

F

75* 76*

75*76*

81* 82* 90* 97*

H 51 C

G

40 A 6* 12*

B 40* 42*

81

D 51* 75* 76*

F 81* 82* 90* 97*

FIGURE 15.14: After deleting keys 72 from Figure 15.13. This ﬁgure corresponds to the scenario described in step 4(b) of the Delete algorithm. In particular, the example illustrates the merge of two leaf nodes (D and E). Node D underﬂows, but redistribution is not possible. From the parent node G, key 75 and child pointer to E are removed.

One may wonder why in the redistribution and the merge algorithms, the leaf node and the index node are treated diﬀerently. The reason is because when we generated an index entry, we had treated two cases diﬀerently: the case when the entry points to a leaf node and the case when the entry points to a index node. This is discussed at the beginning of Section 15.4. To generate a new entry pointing to a leaf node, we copied the smallest key from the leaf node. But to generate a new entry pointing to an index node, we pushed a key from the child node up. A key which was copied up can be safely deleted later (when merge occurs). But a key which was pushed up must be kept somewhere. If we delete it from a parent node, we should drag it down to a child node. As a running example of merging index nodes, consider deleting object 42 from the B+tree of Figure 15.14. Node B underﬂows, and it is merged with A. Correspondingly, in the parent node C, the key 40 and the child pointer to B are deleted. The temporary result is shown in Figure 15.15. It’s temporary since node C underﬂows. To handle the underﬂow of node C, it is merged with G, its sole sibling node. As a consequence, the root node H now has only one child. Thus, H is removed and C becomes the new root. We point out that to merge two index nodes C and G, a key is dragged down from the parent node (versus being deleted in the case of merging leaf nodes). The ﬁnal

© 2005 by Chapman & Hall/CRC

B Trees

15-17 H 51 C

G

40 A 6* 12*

B

40*

81

D

40* 42*

F

51* 75* 76*

81* 82* 90* 97*

FIGURE 15.15: Temporary tree in the middle of deleting object 42 from Figure 15.14. Nodes A and B are merged. Key 40 and child pointer to B are removed from C. C

51 81 A 6* 12* 40*

D 51* 75* 76*

F 81* 82* 90* 97*

FIGURE 15.16: After the deletion of object 42 is ﬁnished. This ﬁgure illustrates an example of merging two index nodes. In particular, index nodes C and G are merged. The key 51 is dragged down from the parent node H. Since that is the only key in root H, node C becomes the new root and the height of the tree is decreased by one.

result after completing the deletion of 42* is shown in Figure 15.16.

15.5

Further Discussions

In this section we discuss various issues of the B-tree and the B+-tree.

15.5.1

Eﬃciency Analysis

Theorem: In the B-tree or the B+-tree, the I/O cost of insertion, deletion and exact-match query is O(logB n). In the B+-tree, the I/O cost of a range search is O(logB n + t/B). Here B is the minimum page capacity in number of records, n is the total number of objects in the tree, and t is the number of objects in the range query result. The correctness of the theorem can be seen from the discussion of the algorithms. Basically, for both the B-tree and the B+-tree, all the insertion, deletion and exact-match query algorithms examine a single path from root to leaf. At each node, the algorithm might examine up to two other nodes. However, asymptotically the complexity of these algorithms are equal to the height of the tree. Since there are n objects, and the minimum fan-out of the tree is B, the height of the tree is O(logB n). So the complexity of the algorithms is O(logB n) as well. For the range query in the B+-tree, logB n nodes are examined to ﬁnd the leaf node that contains the low value of the query range. By following the sibling pointers in the leaf nodes, the other leaf nodes that contain objects in the query range are also found. Among

© 2005 by Chapman & Hall/CRC

15-18

Handbook of Data Structures and Applications

all the leaf nodes examined, except for the ﬁrst and the last, every node contains at least B objects in the query result. Thus if there are t objects in the query result, the range query complexity is O(logB n + t/B).

15.5.2

Why is the B+-tree Widely Accepted?

One can safely claim that the B+-tree has been included in at least 99%, if not all, of the database management systems (DBMS). No other index structure has received so much attention. Why is that? Let’s do some calculation. First, we point out that a practical number of minimum occupancy of a B+-tree is B = 100. Thus the fan-out of the tree is between 100 and 200. Analysis has shown that in a real-world B+-tree, the average page capacity is about 66.7% full. Or, a page typically contains 200*66.7%=133 entries. Here is the relationship between the height of the tree and the number of objects that can hold in a typical B+-tree: • height=0: B+-tree holds 133 objects on average. There is a single node, which is 66.7% full. • height=1: B+-tree holds 1332 = 17, 689 objects. There are 133 leaf nodes, each holds 133 objects. • height=2: B+-tree holds 1333 = 2, 352, 637 objects. • height=3: B+-tree holds 1334 = 312, 900, 721 (over 0.3 billion) objects. The ﬁrst two levels of the B+-tree contains 1+133=134 disk pages. This is very small. If a disk page is 4KB large, 134 disk pages occupy 134*4KB=536KB disk space. It’s quite reasonable to assume that the ﬁrst two levels of the B+-tree always stays in memory. The calculations lead to this discovery: in a large database with 0.3 billion objects, to ﬁnd one object we only need to access two disk pages! This is unbelievably good.

15.5.3

Bulk-Loading a B+-tree

In some cases, we are given a large set of records and we are asked to build a B+-tree index. Of course, we can start with an empty B+-tree and insert one record at a time using the Insert algorithm. However, this approach is not eﬃcient, as the I/O cost is O(n · logB n). Many systems have implemented the bulk-loading utility. The idea is as follows. First, sort the objects. Use the objects to ﬁll in leaf nodes in sequential order. For instance, if a leaf node holds up to 2B objects, the 2B smallest objects are stored in page 1, the next 2B objects are stored in page 2, etc. Next, build the index nodes at one level up. Assume an index node holds up to 2B child pointers. Create the ﬁrst index node as the parent of the ﬁrst 2B leaf nodes. Create the second index node as the parent of the next 2B leaf nodes, etc. Then, build the index nodes at two levels above the leaf level, and so on. The process stops when there is only one node at a level. This node is the tree root. If the objects are sorted already, the bulk-loading algorithm has an I/O cost of O(n/B). Otherwise, the bulk-loading algorithm has asymptotically the same I/O cost as external sort, which is O(n/B · logB n). Notice that even if the bulk-loading algorithm performs a sorting ﬁrst, it is still B times faster than inserting objects one at a time into the structure.

15.5.4

Aggregation Query in a B+-tree

The B+-tree can also be used to answer the aggregation query: “given a key range R, ﬁnd the aggregate value of objects whose keys are in R”. The standard SQL supports

© 2005 by Chapman & Hall/CRC

B Trees

15-19

the following aggregation operators: COUNT, SUM, AVG, MIN, MAX. For instance, the COUNT operator returns the number of objects in the query range. Here AVG can be computed as SUM/AVG. Thus we focus on the other four aggregate operators. Since the B+-tree eﬃciently supports the range query, it makes sense to utilize it to answer the aggregation query as well. Let’s ﬁrst look at some concepts. Associated with each aggregate operator, there exists a init value and an aggregate function. The init value is the aggregate for an empty set of objects. For instance, the init value for the COUNT operator is 0. The aggregate function computes the aggregate value. There are two versions. One version takes two aggregate values of object set S1 and S2 , and computes the aggregate value of set S1 ∪ S2 . Another version takes one aggregate value of set S1 and an object o and computes the aggregate value of S1 ∪ {o}. For instance, if we know COU N T1 and COU N T2 of two sets, the COUNT for the whole set is COU N T1 +COU N T2 . The COUNT of subset 1 added with an object o is COU N T1 + 1. The init value and the aggregate functions for COUNT, SUM, MIN, and MAX are shown below. • COUNT operator: – init value = 0 – aggregate(COU N T1 , COU N T2 ) = COU N T1 + COU N T2 – aggregate(COU N T1 , object) = COU N T1 + 1 • SUM operator: – init value = 0 – aggregate(SU M1, SU M2 ) = SU M1 + SU M2 – aggregate(SU M1, object) = SU M1 + object.value • MIN operator: – init value = +∞ – aggregate(M IN1, M IN2 ) = min{M IN1, M IN2 } – aggregate(M IN1, object) = min{M IN1, object.value} • MAX operator: – init value = −∞ – aggregate(M AX1 , M AX2 ) = max{M AX1 , M AX2 } – aggregate(M AX1 , object) = max{M AX1 , object.value} The B+-tree can support the aggregation query in the following way. We keep a temporary aggregate value, which is initially set to be init value. A range search is performed on the B+-tree. For each object found, its value is aggregated with the temporary aggregate value on-the-ﬂy. When all objects whose keys are in the query range are processed, this temporary aggregate value is returned. However, this approach is not eﬃcient, as the I/O cost is O(logB n + t/B), which is linear to the number of objects divided by B. If the query range is large, the algorithm needs to access too many disk pages. It is ideal to ﬁnd some approach whose query performance is independent to the size of the objects in the query range. A better way is to store the local aggregate values in the tree. In more detail, along with each child pointer, we store the aggregate value of all objects in the corresponding sub-tree. By doing so, if the query range fully contains the key range of a sub-tree, we take the associated local aggregate value and avoid browsing the sub-tree. We call such a B+-tree

© 2005 by Chapman & Hall/CRC

15-20

Handbook of Data Structures and Applications

with extra aggregate information the aggregation B+-tree. The algorithm to perform a aggregation query using the aggregation B+-tree is shown below. Algorithm Aggregation(x, R) Input: a node x of an aggregation B+-tree, the query key range R. Action: Among objects in the sub-tree rooted by x, compute the aggregate value of objects whose keys belong to R. 1. Initialize the temporary aggregation value v as init value. 2. if x is a leaf node (a) For every object o in x where o.value ∈ R, v = aggr(v, o). 3. else (a) for every child pointer x.child[i] i. if the key range of x.child[i] is contained in R v = aggregate(v, x.child[i].aggr) ii. else if the key range of x.child[i] intersects R y = DiskRead(x.child[i]) v = aggregate(v, Aggregation(y, R)) iii. end if (b) end for 4. return v. The algorithm starts with examining the root node. Here the child pointers are divided into three groups. (1) There are at most two child pointers whose key ranges intersect the query range R. (2) The child pointers between them have key ranges fully contained in R. (3) The child pointers outside of them have key ranges non-intersecting with R. For child pointers in group (2), the local aggregate stored at the child pointer (represented by x.child[i].aggr) is aggregated to the temporary aggregate value and the examination of the sub-tree is avoided. This is shown in step 3(a)i of the algorithm. For child pointers in group (3), no object in the sub-trees will contribute to the query and the examination of the sub-trees are also avoided. For each of the two child pointers whose key ranges intersect R, a recursive call to Aggregation is performed. This is shown in step 3(a)ii of the algorithm. If we go one level down, in each of the two child nodes, there can be at most one child pointer whose key range intersects R. Take the left child node as an example. If there is a child pointer whose key range intersect R, all child pointers to the left of it will be outside of R and all child pointers to the right of it will be fully contained in R. Thus the algorithm examines two paths from root to leaf. Theorem: The I/O cost of the Aggregation query algorithm is O(logB n). The above theorem shows that the aggregation query performance is independent of the number of objects in the query range.

References [1] R. Bayer and E. M. McCreight. Organization and Maintenance of Large Ordered Indices. Acta Informatica, 1, 1972.

© 2005 by Chapman & Hall/CRC

B Trees

15-21

[2] D. Comer. The Ubiquitous B-Tree. ACM Computing Surveys, 11(2), 1979. [3] A. Guttman. R-trees: A Dynamic Index Structure for Spatial Searching. In Proceedings of ACM/SIGMOD Annual Conference on Management of Data (SIGMOD), 1984. [4] D. Knuth. The Art of Computer Programming, Vol. 3: Sorting and Searching. Addison Wesley, 1973.

© 2005 by Chapman & Hall/CRC

IV Multidimensional and Spatial Structures 16 Multidimensional Spatial Data Structures

Hanan Samet . . . . . . . . . 16-1

Introduction • Point Data • Bucketing Methods • Region Data • Rectangle Data Line Data and Boundaries of Regions • Research Issues and Summary

17 Planar Straight Line Graphs

•

Siu-Wing Cheng . . . . . . . . . . . . . . . . . . . . . . . 17-1

Introduction • Features of PSLGs • Operations on PSLGs • Winged-Edge • Halfedge • Quadedge • Further Remarks • Glossary

18 Interval, Segment, Range, and Priority Search Trees Introduction

•

Interval Trees

19 Quadtrees and Octrees

•

Segment Trees

•

Range Trees

•

D. T. Lee . . 18-1

Priority Search Trees

Srinivas Aluru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-1

Introduction • Quadtrees for Point Data • Spatial Queries with Region Quadtrees Image Processing Applications • Scientiﬁc Computing Applications

20 Binary Space Partitioning Trees

Bruce F. Naylor . . . . . . . . . . . . . . . . . . . 20-1

Introduction • BSP Trees as a Multi-Dimensional Search Structure derings • BSP Tree as a Hierarchy of Regions

21 R-trees

•

•

Visibility Or-

Scott Leutenegger and Mario A. Lopez . . . . . . . . . . . . . . . . . . . . . . . . 21-1

Introduction • Basic Concepts Analytical Models

•

Improving Performance

•

Advanced Operations

•

Sumeet Dua and S. S. Iyengar . . . 22-1

22 Managing Spatio-Temporal Data

Introduction and Background • Overlapping Linear Quadtree • 3D R-tree • 2+3 Rtree • HR-tree • MV3R-tree • Indexing Structures for Continuously Moving Objects

23 Kinetic Data Structures

Leonidas Guibas . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-1

Introduction • Motion in Computational Geometry • Motion Models • Kinetic Data Structures • A KDS Application Survey • Querying Moving Objects • Sources and Related Materials

24 Online Dictionary Structures

Teoﬁlo F. Gonzalez . . . . . . . . . . . . . . . . . . . 24-1

Introduction • Trie Implementations • Binary Search Tree Implementations anced BST Implementation • Additional Operations • Discussion

25 Cuttings

•

Bal-

Bernard Chazelle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-1

Introduction

•

The Cutting Construction

•

Applications

26 Approximate Geometric Query Structures Christian A. Duncan and Michael T. Goodrich . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-1 Introduction • General Terminology • Approximate Queries BBD Trees • BAR Trees • Maximum-Spread k-d Trees

© 2005 by Chapman & Hall/CRC

•

Quasi-BAR Bounds

•

27 Geometric and Spatial Data Structures in External Memory Jeﬀrey Scott Vitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-1 Introduction • EM Algorithms for Batched Geometric Problems • External Memory Tree Data Structures • Spatial Data Structures and Range Search • Related Problems • Dynamic and Kinetic Data Structures • Conclusions

© 2005 by Chapman & Hall/CRC

16 Multidimensional Spatial Data Structures

Hanan Samet University of Maryland

16.1

16.1 16.2 16.3 16.4 16.5 16.6 16.7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Point Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bucketing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Region Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangle Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Line Data and Boundaries of Regions . . . . . . . . . . . Research Issues and Summary . . . . . . . . . . . . . . . . . . . .

16-1 16-3 16-8 16-12 16-17 16-20 16-23

Introduction

The representation of multidimensional data is an important issue in applications in diverse ﬁelds that include database management systems (Chapter 60), computer graphics (Chapter 54), computer vision, computational geometry (Chapters 62, 63 and 64), image processing (Chapter 57), geographic information systems (GIS) (Chapter 55), pattern recognition, VLSI design (Chapter 52), and others. The most common deﬁnition of multidimensional data is a collection of points in a higher dimensional space. These points can represent locations and objects in space as well as more general records where only some, or even none, of the attributes are locational. As an example of nonlocational point data, consider an employee record which has attributes corresponding to the employee’s name, address, sex, age, height, weight, and social security number. Such records arise in database management systems and can be treated as points in, for this example, a seven-dimensional space (i.e., there is one dimension for each attribute) albeit the diﬀerent dimensions have diﬀerent type units (i.e., name and address are strings of characters, sex is binary; while age, height, weight, and social security number are numbers). When multidimensional data corresponds to locational data, we have the additional property that all of the attributes have the same unit which is distance in space. In this case, we can combine the distance-denominated attributes and pose queries that involve proximity. For example, we may wish to ﬁnd the closest city to Chicago within the two-dimensional space from which the locations of the cities are drawn. Another query seeks to ﬁnd all cities within 50 miles of Chicago. In contrast, such queries are not very meaningful when the attributes do not have the same type.

∗ All

c ﬁgures 2003 by Hanan Samet.

16-1

© 2005 by Chapman & Hall/CRC

16-2

Handbook of Data Structures and Applications

When multidimensional data spans a continuous physical space (i.e., an inﬁnite collection of locations), the issues become more interesting. In particular, we are no longer just interested in the locations of objects, but, in addition, we are also interested in the space that they occupy (i.e., their extent). Some example objects include lines (e.g., roads, rivers), regions (e.g., lakes, counties, buildings, crop maps, polygons, polyhedra), rectangles, and surfaces. The objects may be disjoint or could even overlap. One way to deal with such data is to store it explicitly by parameterizing it and thereby reduce it to a point in a higher dimensional space. For example, a line in two-dimensional space can be represented by the coordinate values of its endpoints (i.e., a pair of x and a pair of y coordinate values) and then stored as a point in a four-dimensional space (e.g., [33]). Thus, in eﬀect, we have constructed a transformation (i.e., mapping) from a two-dimensional space (i.e., the space from which the lines are drawn) to a four-dimensional space (i.e., the space containing the representative point corresponding to the line). The transformation approach is ﬁne if we are just interested in retrieving the data. It is appropriate for queries about the objects (e.g., determining all lines that pass through a given point or that share an endpoint, etc.) and the immediate space that they occupy. However, the drawback of the transformation approach is that it ignores the geometry inherent in the data (e.g., the fact that a line passes through a particular region) and its relationship to the space in which it is embedded. For example, suppose that we want to detect if two lines are near each other, or, alternatively, to ﬁnd the nearest line to a given line. This is diﬃcult to do in the four-dimensional space, regardless of how the data in it is organized, since proximity in the two-dimensional space from which the lines are drawn is not necessarily preserved in the four-dimensional space. In other words, although the two lines may be very close to each other, the Euclidean distance between their representative points may be quite large, unless the lines are approximately the same size, in which case proximity is preserved (e.g., [69]). Of course, we could overcome these problems by projecting the lines back to the original space from which they were drawn, but in such a case, we may ask what was the point of using the transformation in the ﬁrst place? In other words, at the least, the representation that we choose for the data should allow us to perform operations on the data. Thus when the multidimensional spatial data is nondiscrete, we need representations besides those that are designed for point data. The most common solution, and the one that we focus on in the rest of this chapter, is to use data structures that are based on spatial occupancy. Such methods decompose the space from which the spatial data is drawn (e.g., the twodimensional space containing the lines) into regions that are often called buckets because they often contain more than just one element. They are also commonly known as bucketing methods. In this chapter, we explore a number of diﬀerent representations of multidimensional data bearing the above issues in mind. While we cannot give exhaustive details of all of the data structures, we try to explain the intuition behind their development as well as to give literature pointers to where more information can be found. Many of these representations are described in greater detail in [60, 62, 63] including an extensive bibliography. Our approach is primarily a descriptive one. Most of our examples are of two-dimensional spatial data although the representations are applicable to higher dimensional spaces as well. At times, we discuss bounds on execution time and space requirements. Nevertheless, this information is presented in an inconsistent manner. The problem is that such analyses are very diﬃcult to perform for many of the data structures that we present. This is especially true for the data structures that are based on spatial occupancy (e.g., quadtree (see Chapter 19 for more details) and R-tree (see Chapter 21 for more details) variants). In particular, such methods have good observable average-case behavior but may have very bad

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-3

worst cases which may only arise rarely in practice. Their analysis is beyond the scope of this chapter and usually we do not say anything about it. Nevertheless, these representations ﬁnd frequent use in applications where their behavior is deemed acceptable, and is often found to be better than that of solutions whose theoretical behavior would appear to be superior. The problem is primarily attributed to the presence of large constant factors which are usually ignored in the big O and Ω analyses [46]. The rest of this chapter is organized as follows. Section 16.2 reviews a number of representations of point data of arbitrary dimensionality. Section 16.3 describes bucketing methods that organize collections of spatial objects (as well as multidimensional point data) by aggregating the space that they occupy. The remaining sections focus on representations of non-point objects of diﬀerent types. Section 16.4 covers representations of region data, while Section 16.5 discusses a subcase of region data which consists of collections of rectangles. Section 16.6 deals with curvilinear data which also includes polygonal subdivisions and collections of line segments. Section 16.7 contains a summary and a brief indication of some research issues.

16.2

Point Data

The simplest way to store point data of arbitrary dimension is in a sequential list. Accesses to the list can be sped up by forming sorted lists for the various attributes which are known as inverted lists (e.g., [45]). There is one list for each attribute. This enables pruning the search with respect to the value of one of the attributes. It should be clear that the inverted list is not particularly useful for multidimensional range searches. The problem is that it can only speed up the search for one of the attributes (termed the primary attribute). A widely used solution is exempliﬁed by the ﬁxed-grid method [10, 45]. It partitions the space from which the data is drawn into rectangular cells by overlaying it with a grid. Each grid cell c contains a pointer to another structure (e.g., a list) which contains the set of points that lie in c. Associated with the grid is an access structure to enable the determination of the grid cell associated with a particular point p. This access structure acts like a directory and is usually in the form of a d-dimensional array with one entry per grid cell or a tree with one leaf node per grid cell. There are two ways to build a ﬁxed grid. We can either subdivide the space into equalsized intervals along each of the attributes (resulting in congruent grid cells) or place the subdivision lines at arbitrary positions that are dependent on the underlying data. In essence, the distinction is between organizing the data to be stored and organizing the embedding space from which the data is drawn [55]. In particular, when the grid cells are congruent (i.e., equal-sized when all of the attributes are locational with the same range and termed a uniform grid), use of an array access structure is quite simple and has the desirable property that the grid cell associated with point p can be determined in constant time. Moreover, in this case, if the width of each grid cell is twice the search radius for a rectangular range query, then the average search time is O(F · 2d ) where F is the number of points that have been found [12]. Figure 16.1 is an example of a uniform-grid representation for a search radius equal to 10 (i.e., a square of size 20 × 20). Use of an array access structure when the grid cells are not congruent requires us to have a way of keeping track of their size so that we can determine the entry of the array access structure corresponding to the grid cell associated with point p. One way to do this is to make use of what are termed linear scales which indicate the positions of the grid lines (or partitioning hyperplanes in d > 2 dimensions). Given a point p, we determine the grid cell in which p lies by ﬁnding the “coordinate values” of the appropriate grid cell. The linear

© 2005 by Chapman & Hall/CRC

16-4

Handbook of Data Structures and Applications (0,100)

(100,100)

(62,77) Toronto

(82,65) Buffalo

(35,42) Chicago y (27,35) Omaha

(45,30) Memphis

(52,10) Mobile (0,0)

x

(85,15) Atlanta (90,5) Miami (100,0)

FIGURE 16.1: Uniform-grid representation corresponding to a set of points with a search radius of 20.

scales are usually implemented as one-dimensional trees containing ranges of values. The array access structure is ﬁne as long as the data is static. When the data is dynamic, it is likely that some of the grid cells become too full while other grid cells are empty. This means that we need to rebuild the grid (i.e., further partition the grid or reposition the grid partition lines or hyperplanes) so that the various grid cells are not too full. However, this creates many more empty grid cells as a result of repartitioning the grid (i.e., empty grid cells are split into more empty grid cells). The number of empty grid cells can be reduced by merging spatially-adjacent empty grid cells into larger empty grid cells, while splitting grid cells that are too full, thereby making the grid adaptive. The result is that we can no longer make use of an array access structure to retrieve the grid cell that contains query point p. Instead, we make use of a tree access structure in the form of a k-ary tree where k is usually 2d . Thus what we have done is marry a k-ary tree with the ﬁxed-grid method. This is the basis of the point quadtree [22] and the PR quadtree [56, 63] which are multidimensional generalizations of binary trees. The diﬀerence between the point quadtree and the PR quadtree is the same as the diﬀerence between trees and tries [25], respectively. The binary search tree [45] is an example of the former since the boundaries of diﬀerent regions in the search space are determined by the data being stored. Address computation methods such as radix searching [45] (also known as digital searching) are examples of the latter, since region boundaries are chosen from among locations that are ﬁxed regardless of the content of the data set. The process is usually a recursive halving process in one dimension, recursive quartering in two dimensions, etc., and is known as regular decomposition. In two dimensions, a point quadtree is just a two-dimensional binary search tree. The ﬁrst point that is inserted serves as the root, while the second point is inserted into the relevant quadrant of the tree rooted at the ﬁrst point. Clearly, the shape of the tree depends on the order in which the points were inserted. For example, Figure 16.2 is the point quadtree corresponding to the data of Figure 16.1 inserted in the order Chicago, Mobile, Toronto, Buffalo, Memphis, Omaha, Atlanta, and Miami.

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures (0,100)

16-5

(100,100)

(62,77) Toronto Chicago (82,65) Buffalo (35,42) Chicago

Toronto Omaha

Mobile

y (45,30) Memphis

(27,35) Omaha

(52,10) Mobile

(0,0)

(85,15) Atlanta

Buffalo Memphis Atlanta Miami (b)

(90,5) Miami (100,0)

x (a)

FIGURE 16.2: A point quadtree and the records it represents corresponding to Figure 16.1: (a) the resulting partition of space, and (b) the tree representation.

In two dimensions, the PR quadtree is based on a recursive decomposition of the underlying space into four congruent (usually square in the case of locational attributes) cells until each cell contains no more than one point. For example, Figure 16.3a is the partition of the underlying space induced by the PR quadtree corresponding to the data of Figure 16.1, while Figure 16.3b is its tree representation. The shape of the PR quadtree is independent of the order in which data points are inserted into it. The disadvantage of the PR quadtree is that the maximum level of decomposition depends on the minimum separation between two points. In particular, if two points are very close, then the decomposition can be very deep. This can be overcome by viewing the cells or nodes as buckets with capacity c and only decomposing a cell when it contains more than c points. As the dimensionality of the space increases, each level of decomposition of the quadtree results in many new cells as the fanout value of the tree is high (i.e., 2d ). This is alleviated by making use of a k-d tree [8]. The k-d tree is a binary tree where at each level of the tree, we subdivide along a diﬀerent attribute so that, assuming d locational attributes, if the ﬁrst split is along the x axis, then after d levels, we cycle back and again split along the x axis. It is applicable to both the point quadtree and the PR quadtree (in which case we have a PR k-d tree, or a bintree in the case of region data). At times, in the dynamic situation, the data volume becomes so large that a tree access structure such as the one used in the point and PR quadtrees is ineﬃcient. In particular, the grid cells can become so numerous that they cannot all ﬁt into memory thereby causing them to be grouped into sets (termed buckets) corresponding to physical storage units (i.e., pages) in secondary storage. The problem is that, depending on the implementation of the tree access structure, each time we must follow a pointer, we may need to make a disk access. Below, we discuss two possible solutions: one making use of an array access structure and one making use of an alternative tree access structure with a much larger fanout. We assume that the original decomposition process is such that the data is only associated with the leaf nodes of the original tree structure. The diﬀerence from the array access structure used with the static ﬁxed-grid method

© 2005 by Chapman & Hall/CRC

16-6

Handbook of Data Structures and Applications A

(0,100)

(100,100) T B

C

E

(62,77) Toronto y

T (82,65) Buffalo R

Mobile

F

Chicago Omaha Memphis Atlanta Miami (b)

(35,42) Chicago (45,30) Memphis

(27,35) Omaha Q

R (52,10) Mobile (0,0)

D

Toronto Buffalo

S

(85,15) Atlanta

(90,5) Miami

S

W U

(100,0)

x (a)

Q

V

Omaha Chicago R Memphis Mobile

S

Miami Toronto T Atlanta Buffalo

(c)

FIGURE 16.3: A PR quadtree and the points it represents corresponding to Figure 16.1: (a) the resulting partition of space, (b) the tree representation, and (c) one possible B+ -tree for the nonempty leaf grid cells where each node has a minimum of 2 and a maximum of 3 entries. The nonempty grid cells in (a) have been labeled with the name of the B+ -tree leaf node in which they are a member.

described earlier is that the array access structure (termed grid directory) may be so large (e.g., when d gets large) that it resides on disk as well, and the fact that the structure of the grid directory can change as the data volume grows or contracts. Each grid cell (i.e., an element of the grid directory) stores the address of a bucket (i.e., page) that contains the points associated with the grid cell. Notice that a bucket can correspond to more than one grid cell. Thus any page can be accessed by two disk operations: one to access the grid cell and one more to access the actual bucket. This results in EXCELL [71] when the grid cells are congruent (i.e., equal-sized for locational data), and grid ﬁle [55] when the grid cells need not be congruent. The diﬀerence between these methods is most evident when a grid partition is necessary (i.e., when a bucket becomes too full and the bucket is not shared among several grid cells). In particular, a grid partition in the grid ﬁle only splits one interval in two thereby resulting in the insertion of a (d − 1)-dimensional cross-section. On the other hand, a grid partition in EXCELL means that all intervals must be split in two thereby doubling the size of the grid directory. An alternative to the array access structure is to assign an ordering to the grid cells resulting from the adaptive grid, and then to impose a tree access structure on the elements of the ordering that correspond to the nonempty grid cells. The ordering is analogous to using a mapping from d dimensions to one dimension. There are many possible orderings (e.g., Chapter 2 in [60]) with the most popular shown in Figure 16.4. The domain of these mappings is the set of locations of the smallest possible grid cells (termed pixels) in the underlying space and thus we need to use some easily identiﬁable pixel in each grid cell such as the one in the grid cell’s lower-left corner. Of course, we

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-7

(a)

(b)

(c)

(d)

FIGURE 16.4: The result of applying four common diﬀerent space-ordering methods to an 8×8 collection of pixels whose ﬁrst element is in the upper-left corner: (a) row order, (b) row-prime order, (c) Morton order, (d) Peano-Hilbert.

also need to know the size of each grid cell. One mapping simply concatenates the result of interleaving the binary representations of the coordinate values of the lower-left corner (e.g., (a, b) in two dimensions) and i of each grid cell of size 2i so that i is at the right. The resulting number is termed a locational code and is a variant of the Morton ordering (Figure 16.4c). Assuming such a mapping and sorting the locational codes in increasing order yields an ordering equivalent to that which would be obtained by traversing the leaf nodes (i.e., grid cells) of the tree representation (e.g., Figure 16.8b) in the order SW, SE, NW, NE. The Morton ordering (as well as the Peano-Hilbert ordering shown in Figure 16.4d) is particularly attractive for quadtree-like decompositions because all pixels within a grid cell appear in consecutive positions in the ordering. Alternatively, these two orders exhaust a grid cell before exiting it. For example, Figure 16.3c shows the result of imposing a B+ -tree [18] access structure on the leaf grid cells of the PR quadtree given in Figure 16.3b. Each node of the B+ -tree in our example has a minimum of 2 and a maximum of 3 entries. Figure 16.3c does not contain the values resulting from applying the mapping to the individual grid cells nor does it show the discriminator values that are stored in the nonleaf nodes of the B+ -tree. The leaf grid cells of the PR quadtree in Figure 16.3a are marked with the label of the leaf node of the B+ -tree of which they are a member (e.g., the grid cell containing Chicago is in leaf node Q of the B+ -tree). It is important to observe that the above combination of the PR quadtree and the B+ -tree has the property that the tree structure of the partition process of the underlying space has been decoupled [61] from that of the node hierarchy (i.e., the grouping process of the nodes resulting from the partition process) that makes up the original tree directory. More precisely, the grouping process is based on proximity in the ordering of the locational codes

© 2005 by Chapman & Hall/CRC

16-8

Handbook of Data Structures and Applications

and on the minimum and maximum capacity of the nodes of the B+ -tree. Unfortunately, the resulting structure has the property that the space that is spanned by a leaf node of the B+ -tree (i.e., the grid cells spanned by it) has an arbitrary shape and, in fact, does not usually correspond to a k-dimensional hyper-rectangle. In particular, the space spanned by the leaf node may have the shape of a staircase (e.g., the leaf grid cells in Figure 16.3a that comprise leaf nodes S and T of the B+ -tree in Figure 16.3c) or may not even be connected in the sense that it corresponds to regions that are not contiguous (e.g., the leaf grid cells in Figure 16.3a that comprise leaf node R of the B+ -tree in Figure 16.3c). The PK-tree [73] is an alternative decoupling method which overcomes these drawbacks by basing the grouping process on k-instantiation which stipulates that each node of the grouping process contains a minimum of k objects or grid cells. The result is that all of the grid cells of the grouping process are congruent at the cost that the result is not balanced although use of relatively large values of k ensures that the resulting trees are relatively shallow. It can be shown that when the partition process has a fanout of f , then k-instantiation means that the number of objects in each node of the grouping process is bounded by f · (k − 1). Note that k-instantiation is diﬀerent from bucketing where we only have an upper bound on the number of objects in the node. Fixed-grids, quadtrees, k-d trees, indexkd tree grid ﬁle, EXCELL, as well as other hierarchical representations are good for range searching queries such as ﬁnding all cities within 80 miles of St. Louis. In particular, they act as pruning devices on the amount of search that will be performed as many points will not be examined since their containing cells lie outside the query range. These representations are generally very easy to implement and have good expected execution times, although they are quite diﬃcult to analyze from a mathematical standpoint. However, their worst cases, despite being rare, can be quite bad. These worst cases can be avoided by making use of variants of range trees [11] and priority search trees [51]. For more details about these data structures, see Chapter 18.

16.3

Bucketing Methods

There are four principal approaches to decomposing the space from which the objects are drawn. The ﬁrst approach makes use of an object hierarchy and the space decomposition is obtained in an indirect manner as the method propagates the space occupied by the objects up the hierarchy with the identity of the propagated objects being implicit to the hierarchy. In particular, associated with each object is a an object description (e.g., for region data, it is the set of locations in space corresponding to the cells that make up the object). Actually, since this information may be rather voluminous, it is often the case that an approximation of the space occupied by the object is propagated up the hierarchy rather than the collection of individual cells that are spanned by the object. For spatial data, the approximation is usually the minimum bounding rectangle for the object, while for nonspatial data it is simply the hyperrectangle whose sides have lengths equal to the ranges of the values of the attributes. Therefore, associated with each element in the hierarchy is a bounding rectangle corresponding to the union of the bounding rectangles associated with the elements immediately below it. The R-tree (e.g., [7, 31]) is an example of an object hierarchy which ﬁnds use especially in database applications. The number of objects or bounding rectangles that are aggregated in each node is permitted to range between m ≤ M/2 and M . The root node in an R-tree has at least two entries unless it is a leaf node in which case it has just one entry corresponding to the bounding rectangle of an object. The R-tree is usually built as the objects are encountered rather than waiting until all objects have been input. The hierarchy

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-9

b

a h

e

g d

i

f c

FIGURE 16.5: Example collection of line segments embedded in a 4×4 grid.

R1

R0

R3

R0: R1 R2 b

a R1: R3 R4

h

R2: R5 R6 g

R3:

R4:

R5:

e

R6: d

a b

d g h

c

(a)

i

e f

i

Q

f

R4 R2

R5

c

R6

(b) FIGURE 16.6: (a) R-tree for the collection of line segments with m=2 and M=3, in Figure 16.5, and (b) the spatial extents of the bounding rectangles. Notice that the leaf nodes in the index also store bounding rectangles although this is only shown for the nonleaf nodes. is implemented as a tree structure with grouping being based, in part, on proximity of the objects or bounding rectangles. For example, consider the collection of line segment objects given in Figure 16.5 shown embedded in a 4 × 4 grid. Figure 16.6a is an example R-tree for this collection with m = 2 and M = 3. Figure 16.6b shows the spatial extent of the bounding rectangles of the nodes in Figure 16.6a, with heavy lines denoting the bounding rectangles corresponding to the leaf nodes, and broken lines denoting the bounding rectangles corresponding to the subtrees rooted at the nonleaf nodes. Note that the R-tree is not unique. Its structure depends heavily on the order in which the individual objects were inserted into (and possibly deleted from) the tree. Given that each R-tree node can contain a varying number of objects or bounding rect-

© 2005 by Chapman & Hall/CRC

16-10

Handbook of Data Structures and Applications

angles, it is not surprising that the R-tree was inspired by the B-tree [6]. Therefore, nodes are viewed as analogous to disk pages. Thus the parameters deﬁning the tree (i.e., m and M ) are chosen so that a small number of nodes is visited during a spatial query (i.e., point and range queries), which means that m and M are usually quite large. The actual implementation of the R-tree is really a B+ -tree [18] as the objects are restricted to the leaf nodes. The eﬃciency of the R-tree for search operations depends on its ability to distinguish between occupied space and unoccupied space (i.e., coverage), and to prevent a node from being examined needlessly due to a false overlap with other nodes. In other words, we want to minimize coverage and overlap. These goals guide the initial R-tree creation process as well, subject to the previously mentioned constraint that the R-tree is usually built as the objects are encountered rather than waiting until all objects have been input. The drawback of the R-tree (and any representation based on an object hierarchy) is that it does not result in a disjoint decomposition of space. The problem is that an object is only associated with one bounding rectangle (e.g., line segment i in Figure 16.6 is associated with bounding rectangle R5, yet it passes through R1, R2, R4, and R5, as well as through R0 as do all the line segments). In the worst case, this means that when we wish to determine which object (e.g., an intersecting line in a collection of line segment objects, or a containing rectangle in a collection of rectangle objects) is associated with a particular point in the two-dimensional space from which the objects are drawn, we may have to search the entire collection. For example, in Figure 16.6, when searching for the line segment that passes through point Q, we need to examine bounding rectangles R0, R1, R4, R2, and R5, rather than just R0, R2, and R5. This drawback can be overcome by using one of three other approaches which are based on a decomposition of space into disjoint cells. Their common property is that the objects are decomposed into disjoint subobjects such that each of the subobjects is associated with a diﬀerent cell. They diﬀer in the degree of regularity imposed by their underlying decomposition rules, and by the way in which the cells are aggregated into buckets. The price paid for the disjointness is that in order to determine the area covered by a particular object, we have to retrieve all the cells that it occupies. This price is also paid when we want to delete an object. Fortunately, deletion is not so common in such applications. A related costly consequence of disjointness is that when we wish to determine all the objects that occur in a particular region, we often need to retrieve some of the objects more than once [1, 2, 19]. This is particularly troublesome when the result of the operation serves as input to another operation via composition of functions. For example, suppose we wish to compute the perimeter of all the objects in a given region. Clearly, each object’s perimeter should only be computed once. Eliminating the duplicates is a serious issue (see [1] for a discussion of how to deal with this problem for a collection of line segment objects, and [2] for a collection of rectangle objects). The ﬁrst method based on disjointness partitions the embedding space into disjoint subspaces, and hence the individual objects into subobjects, so that each subspace consists of disjoint subobjects. The subspaces are then aggregated and grouped in another structure, such as a B-tree, so that all subsequent groupings are disjoint at each level of the structure. The result is termed a k-d-B-tree [59]. The R+ -tree [67, 70] is a modiﬁcation of the k-dB-tree where at each level we replace the subspace by the minimum bounding rectangle of the subobjects or subtrees that it contains. The cell tree [30] is based on the same principle as the R+ -tree except that the collections of objects are bounded by minimum convex polyhedra instead of minimum bounding rectangles. The R+ -tree (as well as the other related representations) is motivated by a desire to avoid overlap among the bounding rectangles. Each object is associated with all the bounding

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-11

R0

R5

R0: R1 R2 b

a R1: R3 R4

h R1

R2: R5 R6 g

R3:

R4:

R5:

d d g h

c h

i

a b e

(a)

e

R4 R6

R6: c

f

i

i

f

R3 R2

c

(b) FIGURE 16.7: (a) R+ -tree for the collection of line segments in Figure 16.5 with m=2 and M=3, and (b) the spatial extents of the bounding rectangles. Notice that the leaf nodes in the index also store bounding rectangles although this is only shown for the nonleaf nodes.

rectangles that it intersects. All bounding rectangles in the tree (with the exception of the bounding rectangles for the objects at the leaf nodes) are non-overlapping∗. The result is that there may be several paths starting at the root to the same object. This may lead to an increase in the height of the tree. However, retrieval time is sped up. Figure 16.7 is an example of one possible R+ -tree for the collection of line segments in Figure 16.5. This particular tree is of order (2,3) although in general it is not possible to guarantee that all nodes will always have a minimum of 2 entries. In particular, the expected B-tree performance guarantees are not valid (i.e., pages are not guaranteed to be m/M full) unless we are willing to perform very complicated record insertion and deletion procedures. Notice that line segment objects c, h, and i appear in two diﬀerent nodes. Of course, other variants are possible since the R+ -tree is not unique. The problem with representations such as the k-d-B-tree and the R+ -tree is that overﬂow in a leaf node may cause overﬂow of nodes at shallower depths in the tree whose subsequent partitioning may cause repartitioning at deeper levels in the tree. There are several ways of overcoming the repartitioning problem. One approach is to use the LSD-tree [32] at the cost of poorer storage utilization. An alternative approach is to use representations such as the hB-tree [49] and the BANG ﬁle [27] which remove the requirement that each block be a hyper-rectangle at the cost of multiple postings. This has a similar eﬀect as that obtained when decomposing an object into several subobjects in order to overcome the nondisjoint decomposition problem when using an object hierarchy. The multiple posting problem is overcome by the BV-tree [28] which decouples the partitioning and grouping processes at the cost that the resulting tree is no longer balanced although as in the PK-tree [73] (which we point out in Section 16.2 is also based on decoupling), use of relatively large fanout

∗ From a theoretical viewpoint, the bounding rectangles for the objects at the leaf nodes should also be disjoint However, this may be impossible (e.g., when the objects are line segments and if many of the line segments intersect at a point).

© 2005 by Chapman & Hall/CRC

16-12

Handbook of Data Structures and Applications

values ensure that the resulting trees are relatively shallow. Methods such as the R+ -tree (as well as the R-tree) also have the drawback that the decomposition is data-dependent. This means that it is diﬃcult to perform tasks that require composition of diﬀerent operations and data sets (e.g., set-theoretic operations such as overlay). The problem is that although these methods are good are distinguishing between occupied and unoccupied space in the underlying space (termed image in much of the subsequent discussion) under consideration, they re unable to correlate occupied space in two distinct images, and likewise for unoccupied space in the two images. In contrast, the remaining two approaches to the decomposition of space into disjoint cells have a greater degree of data-independence. They are based on a regular decomposition. The space can be decomposed either into blocks of uniform size (e.g., the uniform grid [24]) or adapt the decomposition to the distribution of the data (e.g., a quadtree-based approach such as [66]). In the former case, all the blocks are congruent (e.g., the 4 × 4 grid in Figure 16.5). In the latter case, the widths of the blocks are restricted to be powers of two and their positions are also restricted. Since the positions of the subdivision lines are restricted, and essentially the same for all images of the same size, it is easy to correlate occupied and unoccupied space in diﬀerent images. The uniform grid is ideal for uniformly-distributed data, while quadtree-based approaches are suited for arbitrarily-distributed data. In the case of uniformly-distributed data, quadtreebased approaches degenerate to a uniform grid, albeit they have a higher overhead. Both the uniform grid and the quadtree-based approaches lend themselves to set-theoretic operations and thus they are ideal for tasks which require the composition of diﬀerent operations and data sets. In general, since spatial data is not usually uniformly distributed, the quadtreebased regular decomposition approach is more ﬂexible. The drawback of quadtree-like methods is their sensitivity to positioning in the sense that the placement of the objects relative to the decomposition lines of the space in which they are embedded eﬀects their storage costs and the amount of decomposition that takes place. This is overcome to a large extent by using a bucketing adaptation that decomposes a block only if it contains more than b objects.

16.4

Region Data

There are many ways of representing region data. We can represent a region either by its boundary (termed a boundary-based representation) or by its interior (termed an interiorbased representation). In this section, we focus on representations of collections of regions by their interior. In some applications, regions are really objects that are composed of smaller primitive objects by use of geometric transformations and Boolean set operations. Constructive Solid Geometry (CSG) [58] is a term usually used to describe such representations. They are beyond the scope of this chapter. Instead, unless noted otherwise, our discussion is restricted to regions consisting of congruent cells of unit area (volume) with sides (faces) of unit size that are orthogonal to the coordinate axes. Regions with arbitrary boundaries are usually represented by either using approximating bounding rectangles or more general boundary-based representations that are applicable to collections of line segments that do not necessarily form regions. In that case, we do not restrict the line segments to be perpendicular to the coordinate axes. Such representations are discussed in Section 16.6. It should be clear that although our presentation and examples in this section deal primarily with two-dimensional data, they are valid for regions of any dimensionality. The region data is assumed to be uniform in the sense that all the cells that comprise

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-13

each region are of the same type. In other words, each region is homogeneous. Of course, an image may consist of several distinct regions. Perhaps the best deﬁnition of a region is as a set of four-connected cells (i.e., in two dimensions, the cells are adjacent along an edge rather than a vertex) each of which is of the same type. For example, we may have a crop map where the regions correspond to the four-connected cells on which the same crop is grown. Each region is represented by the collection of cells that comprise it. The set of collections of cells that make up all of the regions is often termed an image array because of the nature in which they are accessed when performing operations on them. In particular, the array serves as an access structure in determining the region associated with a location of a cell as well as all remaining cells that comprise the region. When the region is represented by its interior, then often we can reduce the storage requirements by aggregating identically-valued cells into blocks. In the rest of this section we discuss diﬀerent methods of aggregating the cells that comprise each region into blocks as well as the methods used to represent the collections of blocks that comprise each region in the image. The collection of blocks is usually a result of a space decomposition process with a set of rules that guide it. There are many possible decompositions. When the decomposition is recursive, we have the situation that the decomposition occurs in stages and often, although not always, the results of the stages form a containment hierarchy. This means that a block b obtained in stage i is decomposed into a set of blocks bj that span the same space. Blocks bj are, in turn, decomposed in stage i + 1 using the same decomposition rule. Some decomposition rules restrict the possible sizes and shapes of the blocks as well as their placement in space. Some examples include: • • • • •

congruent blocks at each stage similar blocks at all stages all sides of a block are of equal size all sides of each block are powers of two etc.

Other decomposition rules dispense with the requirement that the blocks be rectangular (i.e., there exist decompositions using other shapes such as triangles, etc.), while still others do not require that they be orthogonal, although, as stated before, we do make these assumptions here. In addition, the blocks may be disjoint or be allowed to overlap. Clearly, the choice is large. In the following, we brieﬂy explore some of these decomposition processes. We restrict ourselves to disjoint decompositions, although this need not be the case (e.g., the ﬁeld tree [23]). The most general decomposition permits aggregation along all dimensions. In other words, the decomposition is arbitrary. The blocks need not be uniform or similar. The only requirement is that the blocks span the space of the environment. The drawback of arbitrary decompositions is that there is little structure associated with them. This means that it is diﬃcult to answer queries such as determining the region associated with a given point, besides exhaustive search through the blocks. Thus we need an additional data structure known as an index or an access structure. A very simple decomposition rule that lends itself to such an index in the form of an array is one that partitions a d-dimensional space having coordinate axes xi into d-dimensional blocks by use of hi hyperplanes that dare parallel to the hyperplane formed by xi = 0 (1 ≤ i ≤ d). The result is a collection of i=1 (hi + 1) blocks. These blocks form a grid of irregular-sized blocks rather than congruent blocks. There is no recursion involved in the decomposition process. We term the resulting decomposition an irregular grid as the partition lines are at arbitrary positions in contrast to a uniform

© 2005 by Chapman & Hall/CRC

16-14

Handbook of Data Structures and Applications

grid [24] where the partition lines are positioned so that all of the resulting grid cells are congruent. Although the blocks in the irregular grid are not congruent, we can still impose an array access structure by adding d access structures termed linear scales. The linear scales indicate the position of the partitioning hyperplanes that are parallel to the hyperplane formed by xi = 0 (1 ≤ i ≤ d). Thus given a location l in space, say (a,b) in two-dimensional space, the linear scales for the x and y coordinate values indicate the column and row, respectively, of the array access structure entry which corresponds to the block that contains l. The linear scales are usually represented as one-dimensional arrays although they can be implemented using tree access structures such as binary search trees, range trees, segment trees, etc. Perhaps the most widely known decompositions into blocks are those referred to by the general terms quadtree and octree [60, 63]. They are usually used to describe a class of representations for two and three-dimensional data (and higher as well), respectively, that are the result of a recursive decomposition of the environment (i.e., space) containing the regions into blocks (not necessarily rectangular) until the data in each block satisﬁes some condition (e.g., with respect to its size, the nature of the regions that comprise it, the number of regions in it, etc.). The positions and/or sizes of the blocks may be restricted or arbitrary. It is interesting to note that quadtrees and octrees may be used with both interior-based and boundary-based representations although only the former are discussed in this section. There are many variants of quadtrees and octrees (see also Sections 16.2, 16.5, and 16.6), and they are used in numerous application areas including high energy physics, VLSI, ﬁnite element analysis, and many others. Below, we focus on region quadtrees [43] and to a lesser extent on region octrees [39, 53] They are speciﬁc examples of interior-based representations for two and three-dimensional region data (variants for data of higher dimension also exist), respectively, that permit further aggregation of identically-valued cells. Region quadtrees and region octrees are instances of a restricted-decomposition rule where the environment containing the regions is recursively decomposed into four or eight, respectively, rectangular congruent blocks until each block is either completely occupied by a region or is empty (such a decomposition process is termed regular). For example, Figure 16.8a is the block decomposition for the region quadtree corresponding to three regions A, B, and C. Notice that in this case, all the blocks are square, have sides whose size is a power of 2, and are located at speciﬁc positions. In particular, assuming an origin at the lower-left corner of the image containing the regions, then the coordinate values of the lower-left corner of each block (e.g., (a, b) in two dimensions) of size 2i × 2i satisfy the property that a mod 2i = 0 and b mod 2i = 0. The traditional, and most natural, access structure for a region quadtree corresponding to a d-dimensional image is a tree with a fanout of 2d (e.g., Figure 16.8b). Each leaf node in the tree corresponds to a diﬀerent block b and contains the identity of the region associated with b. Each nonleaf node f corresponds to a block whose volume is the union of the blocks corresponding to the 2d sons of f . In this case, the tree is a containment hierarchy and closely parallels the decomposition in the sense that they are both recursive processes and the blocks corresponding to nodes at diﬀerent depths of the tree are similar in shape. Of course, the region quadtree could also be represented by using a mapping from the domain of the blocks to a subset of the integers and then imposing a tree access structure such as a B+ -tree on the result of the mapping as was described in Section 16.2 for point data stored in a PR quadtree. As the dimensionality of the space (i.e., d) increases, each level of decomposition in the region quadtree results in many new blocks as the fanout value 2d is high. In particular, it is too large for a practical implementation of the tree access structure. In this case, an

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-15

W1 W2 B2 W3 B1 A1

A2

A3

A4

W10

W11

W14

W15

A1

A5

W4 W5 W6 W7

B2

W11 W10

W12 W15 W13 W14

C3

W8 C1 W12

W13

C3 W9 C2

(a)

W1 W2 W3 B1

A2 A3 W4 W5 A4 A5 W6 W7

W8 C1 W9 C2

(b)

FIGURE 16.8: (a) Block decomposition and (b) its tree representation for the region quadtree corresponding to a collection of three regions A, B, and C. access structure termed a bintree [44, 65, 72] with a fanout value of 2 is used. The bintree is deﬁned in a manner analogous to the region quadtree except that at each subdivision stage, the space is decomposed into two equal-sized parts. In two dimensions, at odd stages we partition along the y axis and at even stages we partition along the x axis. In general, in the case of d dimensions, we cycle through the diﬀerent axes every d levels in the bintree. The region quadtree, as well as the bintree, is a regular decomposition. This means that the blocks are congruent — that is, at each level of decomposition, all of the resulting blocks are of the same shape and size. We can also use decompositions where the sizes of the blocks are not restricted in the sense that the only restriction is that they be rectangular and be a result of a recursive decomposition process. In this case, the representations that we described must be modiﬁed so that the sizes of the individual blocks can be obtained. An example of such a structure is an adaptation of the point quadtree [22] to regions. Although the point quadtree was designed to represent points in a higher dimensional space, the blocks resulting from its use to decompose space do correspond to regions. The diﬀerence from the region quadtree is that in the point quadtree, the positions of the partitions are arbitrary, whereas they are a result of a partitioning process into 2d congruent blocks (e.g., quartering in two dimensions) in the case of the region quadtree. As in the case of the region quadtree, as the dimensionality d of the space increases, each level of decomposition in the point quadtree results in many new blocks since the fanout value 2d is high. In particular, it is too large for a practical implementation of the tree access structure. In this case, we can adapt the k-d tree [8], which has a fanout value of 2, to regions. As in the point quadtree, although the k-d tree was designed to represent points in a higher dimensional space, the blocks resulting from its use to decompose space do correspond to regions. Thus the relationship of the k-d tree to the point quadtree is the same as the relationship of the bintree to the region quadtree. In fact, the k-d tree is the precursor of the bintree and its adaptation to regions is deﬁned in a similar manner in the sense that for d-dimensional data we cycle through the d axes every d levels in the k-d tree. The diﬀerence is that in the k-d tree, the positions of the partitions are arbitrary, whereas they are a result of a halving process in the case of the bintree. The k-d tree can be further generalized so that the partitions take place on the various axes at an arbitrary order, and, in fact, the partitions need not be made on every coordinate axis. The k-d tree is a special case of the BSP tree (denoting Binary Space Partitioning) [29] where the partitioning hyperplanes are restricted to be parallel to the axes, whereas in the

© 2005 by Chapman & Hall/CRC

16-16

Handbook of Data Structures and Applications 3

A

B 4

2

1

B

C

D

A

C

1

4

5

D 5 (a)

2

3 (b)

FIGURE 16.9: (a) An arbitrary space decomposition and (b) its BSP tree. The arrows indicate the direction of the positive halfspaces.

BSP tree they have an arbitrary orientation. The BSP tree is a binary tree. In order to be able to assign regions to the left and right subtrees, we need to associate a direction with each subdivision line. In particular, the subdivision lines are treated as separators between two halfspaces† . Let the subdivision line have the equation a · x + b · y + c = 0. We say that the right subtree is the ‘positive’ side and contains all subdivision lines formed by separators that satisfy a · x + b · y + c ≥ 0. Similarly, we say that the left subtree is ‘negative’ and contains all subdivision lines formed by separators that satisfy a · x + b · y + c < 0. As an example, consider Figure 16.9a which is an arbitrary space decomposition whose BSP tree is given in Figure 16.9b. Notice the use of arrows to indicate the direction of the positive halfspaces. The BSP tree is used in computer graphics to facilitate viewing. It is discussed in greater detail in Chapter 20. As mentioned before, the various hierarchical data structures that we described can also be used to represent regions in three dimensions and higher. As an example, we brieﬂy describe the region octree which is the three-dimensional analog of the region quadtree. It is constructed in the following manner. We start with an image in the form of a cubical volume and recursively subdivide it into eight congruent disjoint cubes (called octants) until blocks are obtained of a uniform color or a predetermined level of decomposition is reached. Figure 16.10a is an example of a simple three-dimensional object whose region octree block decomposition is given in Figure 16.10b and whose tree representation is given in Figure 16.10c. The aggregation of cells into blocks in region quadtrees and region octrees is motivated, in part, by a desire to save space. Some of the decompositions have quite a bit of structure thereby leading to inﬂexibility in choosing partition lines, etc. In fact, at times, maintaining the original image with an array access structure may be more eﬀective from the standpoint of storage requirements. In the following, we point out some important implications of the use of these aggregations. In particular, we focus on the region quadtree and region octree. Similar results could also be obtained for the remaining block decompositions.

Pd (linear) halfspace in d-dimensional space is deﬁned by the inequality i=0 ai · xi ≥ 0 on homogeneous coordinates (x0 = 1). The halfspace is represented by a column vector a. notation, the inequality is written as a · x ≥ 0. In the case of equality, it deﬁnes a hyperplane its normal. It is important to note that halfspaces are volume elements; they are not boundary †A

© 2005 by Chapman & Hall/CRC

the d + 1 In vector with a as elements.

Multidimensional Spatial Data Structures

16-17

A 14

15

11 12

9 10 13 5 6 1

B

4 1 2 3 4

1314 15

2 5 6 7 8 9 10 11 12

(a)

(b)

(c)

FIGURE 16.10: (a) Example three-dimensional object; (b) its region octree block decomposition; and (c) its tree representation.

The aggregation of similarly-valued cells into blocks has an important eﬀect on the execution time of the algorithms that make use of the region quadtree. In particular, most algorithms that operate on images represented by a region quadtree are implemented by a preorder traversal of the quadtree and, thus, their execution time is generally a linear function of the number of nodes in the quadtree. A key to the analysis of the execution time of quadtree algorithms is the Quadtree Complexity Theorem [39] which states that the number of nodes in a region quadtree representation for a simple polygon (i.e., with non-intersecting edges and without holes) is O(p + q) for a 2q × 2q image with perimeter p measured in terms of the width of unit-sized cells (i.e., pixels). In all but the most pathological cases (e.g., a small square of unit width centered in a large image), the q factor is negligible and thus the number of nodes is O(p). The Quadtree Complexity Theorem also holds for three-dimensional data [52] (i.e., represented by a region octree) where perimeter is replaced by surface area, as well as for objects of higher dimensions d for which it is proportional to the size of the (d − 1)-dimensional interfaces between these objects. The most important consequence of the Quadtree Complexity Theorem is that it means that most algorithms that execute on a region quadtree representation of an image, instead of one that simply imposes an array access structure on the original collection of cells, usually have an execution time that is proportional to the number of blocks in the image rather than the number of unit-sized cells. In its most general case, this means that the use of the region quadtree, with an appropriate access structure, in solving a problem in d-dimensional space will lead to a solution whose execution time is proportional to the (d − 1)-dimensional space of the surface of the original d-dimensional image. On the other hand, use of the array access structure on the original collection of cells results in a solution whose execution time is proportional to the number of cells that comprise the image. Therefore, region quadtrees and region octrees act like dimension-reducing devices.

16.5

Rectangle Data

The rectangle data type lies somewhere between the point and region data types. It can also be viewed as a special case of the region data type in the sense that it is a region with only four sides. Rectangles are often used to approximate other objects in an image for which they serve as the minimum rectilinear enclosing object. For example, bounding rectangles are used in cartographic applications to approximate objects such as lakes, forests, hills,

© 2005 by Chapman & Hall/CRC

16-18

Handbook of Data Structures and Applications

etc. In such a case, the approximation gives an indication of the existence of an object. Of course, the exact boundaries of the object are also stored; but they are only accessed if greater precision is needed. For such applications, the number of elements in the collection is usually small, and most often the sizes of the rectangles are of the same order of magnitude as the space from which they are drawn. Rectangles are also used in VLSI design rule checking as a model of chip components for the analysis of their proper placement. Again, the rectangles serve as minimum enclosing objects. In this application, the size of the collection is quite large (e.g., millions of components) and the sizes of the rectangles are several orders of magnitude smaller than the space from which they are drawn. It should be clear that the actual representation that is used depends heavily on the problem environment. At times, the rectangle is treated as the Cartesian product of two onedimensional intervals with the horizontal intervals being treated in a diﬀerent manner than the vertical intervals. In fact, the representation issue is often reduced to one of representing intervals. For example, this is the case in the use of the plane-sweep paradigm [57] in the solution of rectangle problems such as determining all pairs of intersecting rectangles. In this case, each interval is represented by its left and right endpoints. The solution makes use of two passes. The ﬁrst pass sorts the rectangles in ascending order on the basis of their left and right sides (i.e., x coordinate values) and forms a list. The second pass sweeps a vertical scan line through the sorted list from left to right halting at each one of these points, say p. At any instant, all rectangles that intersect the scan line are considered active and are the only ones whose intersection needs to be checked with the rectangle associated with p. This means that each time the sweep line halts, a rectangle either becomes active (causing it to be inserted in the set of active rectangles) or ceases to be active (causing it to be deleted from the set of active rectangles). Thus the key to the algorithm is its ability to keep track of the active rectangles (actually just their vertical sides) as well as to perform the actual one-dimensional intersection test. Data structures such as the segment tree [9], interval tree [20], and the priority search tree [51] can be used to organize the vertical sides of the active rectangles so that, for N rectangles and F intersecting pairs of rectangles, the problem can be solved in O(N · log2 N + F ) time. All three data structures enable intersection detection, insertion, and deletion to be executed in O(log2 N ) time. The diﬀerence between them is that the segment tree requires O(N · log2 N ) space while the interval tree and the priority search tree only need O(N ) space. These algorithms require that the set of rectangles be known in advance. However, they work even when the size of the set of active rectangles exceeds the amount of available memory, in which case multiple passes are made over the data [41]. For more details about these data structures, see Chapter 18. In this chapter, we are primarily interested in dynamic problems (i.e., the set of rectangles is constantly changing). The data structures that are chosen for the collection of the rectangles are diﬀerentiated by the way in which each rectangle is represented. One representation discussed in Section 16.1 reduces each rectangle to a point in a higher dimensional space, and then treats the problem as if we have a collection of points [33]. Again, each rectangle is a Cartesian product of two one-dimensional intervals where the diﬀerence from its use with the plane-sweep paradigm is that each interval is represented by its centroid and extent. Each set of intervals in a particular dimension is, in turn, represented by a grid ﬁle [55] which is described in Section 16.2. The second representation is region-based in the sense that the subdivision of the space from which the rectangles are drawn depends on the physical extent of the rectangle — not just one point. Representing the collection of rectangles, in turn, with a tree-like data

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures C

B

A

16-19

{A,E}

D {G} F G

D

{B,C,D}

B

E {F} (a)

(b)

E (c)

(d)

FIGURE 16.11: (a) Collection of rectangles and the block decomposition induced by the MX-CIF quadtree; (b) the tree representation of (a); the binary trees for the y axes passing through the root of the tree in (b), and (d) the NE son of the root of the tree in (b).

structure has the advantage that there is a relation between the depth of node in the tree and the size of the rectangle(s) that is (are) associated with it. Interestingly, some of the region-based solutions make use of the same data structures that are used in the solutions based on the plane-sweep paradigm. There are three types of region-based solutions currently in use. The ﬁrst two solutions use the R-tree and the R+ -tree (discussed in Section 16.3) to store rectangle data (in this case the objects are rectangles instead of arbitrary objects). The third is a quadtree-based approach and uses the MX-CIF quadtree [42] (see also [47] for a related variant). In the MX-CIF quadtree, each rectangle is associated with the quadtree node corresponding to the smallest block which contains it in its entirety. Subdivision ceases whenever a node’s block contains no rectangles. Alternatively, subdivision can also cease once a quadtree block is smaller than a predetermined threshold size. This threshold is often chosen to be equal to the expected size of the rectangle [42]. For example, Figure 16.11b is the MX-CIF quadtree for a collection of rectangles given in Figure 16.11a. Rectangles can be associated with both leaf and nonleaf nodes. It should be clear that more than one rectangle can be associated with a given enclosing block and, thus, often we ﬁnd it useful to be able to diﬀerentiate between them. This is done in the following manner [42]. Let P be a quadtree node with centroid (CX,CY ), and let S be the set of rectangles that are associated with P . Members of S are organized into two sets according to their intersection (or collinearity of their sides) with the lines passing through the centroid of P ’s block — that is, all members of S that intersect the line x = CX form one set and all members of S that intersect the line y = CY form the other set. If a rectangle intersects both lines (i.e., it contains the centroid of P ’s block), then we adopt the convention that it is stored with the set associated with the line through x = CX. These subsets are implemented as binary trees (really tries), which in actuality are onedimensional analogs of the MX-CIF quadtree. For example, Figure 16.11c and Figure 16.11d illustrate the binary trees associated with the y axes passing through the root and the NE son of the root, respectively, of the MX-CIF quadtree of Figure 16.11b. Interestingly, the MX-CIF quadtree is a two-dimensional analog of the interval tree. described above. More precisely, the MX-CIF quadtree is a a two-dimensional analog of the tile tree [50] which is a regular decomposition version of the interval tree. In fact, the tile tree and the onedimensional MX-CIF quadtree are identical when rectangles are not allowed to overlap.

© 2005 by Chapman & Hall/CRC

16-20

16.6

Handbook of Data Structures and Applications

Line Data and Boundaries of Regions

Section 16.4 was devoted to variations on hierarchical decompositions of regions into blocks, an approach to region representation that is based on a description of the region’s interior. In this section, we focus on representations that enable the speciﬁcation of the boundaries of regions, as well as curvilinear data and collections of line segments. The representations are usually based on a series of approximations which provide successively closer ﬁts to the data, often with the aid of bounding rectangles. When the boundaries or line segments have a constant slope (i.e., linear and termed line segments in the rest of this discussion), then an exact representation is possible. There are several ways of approximating a curvilinear line segment. The ﬁrst is by digitizing it and then marking the unit-sized cells (i.e., pixels) through which it passes. The second is to approximate it by a set of straight line segments termed a polyline. Assuming a boundary consisting of straight lines (or polylines after the ﬁrst stage of approximation), the simplest representation of the boundary of a region is the polygon. It consists of vectors which are usually speciﬁed in the form of lists of pairs of x and y coordinate values corresponding to their start and end points. The vectors are usually ordered according to their connectivity. One of the most common representations is the chain code [26] which is an approximation of a polygon’s boundary by use of a sequence of unit vectors in the four (and sometimes eight) principal directions. Chain codes, and other polygon representations, break down for data in three dimensions and higher. This is primarily due to the diﬃculty in ordering their boundaries by connectivity. The problem is that in two dimensions connectivity is determined by ordering the boundary elements ei,j of boundary bi of object o so that the end vertex of the vector vj corresponding to ei,j is the start vertex of the vector vj+1 corresponding to ei,j+1 . Unfortunately, such an implicit ordering does not exist in higher dimensions as the relationship between the boundary elements associated with a particular object are more complex. Instead, we must make use of data structures which capture the topology of the object in terms of its faces, edges, and vertices. The winged-edge data structure is one such representation which serves as the basis of the boundary model (also known as BRep [5]). For more details about these data structures, see Chapter 17. Polygon representations are very local. In particular, if we are at one position on the boundary, we don’t know anything about the rest of the boundary without traversing it element-by-element. Thus, using such representations, given a random point in space, it is very diﬃcult to ﬁnd the nearest line to it as the lines are not sorted. This is in contrast to hierarchical representations which are global in nature. They are primarily based on rectangular approximations to the data as well as on a regular decomposition in two dimensions. In the rest of this section, we discuss a number of such representations. In Section 16.3 we already examined two hierarchical representations (i.e., the R-tree and the R+ -tree) that propagate object approximations in the form of bounding rectangles. In this case, the sides of the bounding rectangles had to be parallel to the coordinate axes of the space from which the objects are drawn. In contrast, the strip tree [4] is a hierarchical representation of a single curve that successively approximates segments of it with bounding rectangles that does not require that the sides be parallel to the coordinate axes. The only requirement is that the curve be continuous; it need not be diﬀerentiable. The strip tree data structure consists of a binary tree whose root represents the bounding rectangle of the entire curve. The rectangle associated with the root corresponds to a rectangular strip, that encloses the curve, whose sides are parallel to the line joining the endpoints of the curve. The curve is then partitioned in two at one of the locations where it touches the bounding rectangle (these are not tangent points as the curve only needs to be

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

(a)

16-21

(b)

FIGURE 16.12: (a) MX quadtree and (b) edge quadtree for the collection of line segments of Figure 16.5.

continuous; it need not be diﬀerentiable). Each subcurve is then surrounded by a bounding rectangle and the partitioning process is applied recursively. This process stops when the width of each strip is less than a predetermined value. In order to be able to cope with more complex curves such as those that arise in the case of object boundaries, the notion of a strip tree must be extended. In particular, closed curves and curves that extend past their endpoints require some special treatment. The general idea is that these curves are enclosed by rectangles which are split into two rectangular strips, and from now on the strip tree is used as before. The strip tree is similar to the point quadtree in the sense that the points at which the curve is decomposed depend on the data. In contrast, a representation based on the region quadtree has ﬁxed decomposition points. Similarly, strip tree methods approximate curvilinear data with rectangles of arbitrary orientation, while methods based on the region quadtree achieve analogous results by use of a collection of disjoint squares having sides of length power of two. In the following we discuss a number of adaptations of the region quadtree for representing curvilinear data. The simplest adaptation of the region quadtree is the MX quadtree [39, 40]. It is built by digitizing the line segments and labeling each unit-sized cell (i.e., pixel) through which it passes as of type boundary. The remaining pixels are marked WHITE and are merged, if possible, into larger and larger quadtree blocks. Figure 16.12a is the MX quadtree for the collection of line segment objects in Figure 16.5. A drawback of the MX quadtree is that it associates a thickness with a line. Also, it is diﬃcult to detect the presence of a vertex whenever ﬁve or more line segments meet. The edge quadtree [68, 74] is a reﬁnement of the MX quadtree based on the observation that the number of squares in the decomposition can be reduced by terminating the subdivision whenever the square contains a single curve that can be approximated by a single straight line. For example, Figure 16.12b is the edge quadtree for the collection of line segment objects in Figure 16.5. Applying this process leads to quadtrees in which long edges are represented by large blocks or a sequence of large blocks. However, small blocks are required in the vicinity of corners or intersecting edges. Of course, many blocks will contain no edge information at all. The PM quadtree family [54, 66] (see also edge-EXCELL [71]) represents an attempt

© 2005 by Chapman & Hall/CRC

16-22

Handbook of Data Structures and Applications

b

a h

e

g d

i

e

g

f

d

i

c (a)

b

a h

f c

(b)

FIGURE 16.13: (a) PM1 quadtree and (b) PMR quadtree for the collection of line segments of Figure 16.5.

to overcome some of the problems associated with the edge quadtree in the representation of collections of polygons (termed polygonal maps). In particular, the edge quadtree is an approximation because vertices are represented by pixels. There are a number of variants of the PM quadtree. These variants are either vertex-based or edge-based. They are all built by applying the principle of repeatedly breaking up the collection of vertices and edges (forming the polygonal map) until obtaining a subset that is suﬃciently simple so that it can be organized by some other data structure. The PM1 quadtree [66] is an example of a vertex-based PM quadtree. Its decomposition rule stipulates that partitioning occurs as long as a block contains more than one line segment unless the line segments are all incident at the same vertex which is also in the same block (e.g., Figure 16.13a). Given a polygonal map whose vertices are drawn from a grid (say 2m × 2m ), and where edges are not permitted to intersect at points other than the grid points (i.e., vertices), it can be shown that the maximum depth of any leaf node in the PM1 quadtree is bounded from above by 4m + 1 [64]. This enables a determination of the maximum amount of storage that will be necessary for each node. A similar representation has been devised for three-dimensional images (e.g., [3] and the references cited in [63]). The decomposition criteria are such that no node contains more than one face, edge, or vertex unless the faces all meet at the same vertex or are adjacent to the same edge. This representation is quite useful since its space requirements for polyhedral objects are signiﬁcantly smaller than those of a region octree. The PMR quadtree [54] is an edge-based variant of the PM quadtree. It makes use of a probabilistic splitting rule. A node is permitted to contain a variable number of line segments. A line segment is stored in a PMR quadtree by inserting it into the nodes corresponding to all the blocks that it intersects. During this process, the occupancy of each node that is intersected by the line segment is checked to see if the insertion causes it to exceed a predetermined splitting threshold. If the splitting threshold is exceeded, then the node’s block is split once, and only once, into four equal quadrants. For example, Figure 16.13b is the PMR quadtree for the collection of line segment objects in Figure 16.5 with a splitting threshold value of 2. The line segments are inserted in alphabetic order (i.e., a–i). It should be clear that the shape of the PMR quadtree depends on the order in which the line segments are inserted. Note the diﬀerence from the PM1

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-23

quadtree in Figure 16.13a – that is, the NE block of the SW quadrant is decomposed in the PM1 quadtree while the SE block of the SW quadrant is not decomposed in the PM1 quadtree. On the other hand, a line segment is deleted from a PMR quadtree by removing it from the nodes corresponding to all the blocks that it intersects. During this process, the occupancy of the node and its siblings is checked to see if the deletion causes the total number of line segments in them to be less than the predetermined splitting threshold. If the splitting threshold exceeds the occupancy of the node and its siblings, then they are merged and the merging process is reapplied to the resulting node and its siblings. Notice the asymmetry between the splitting and merging rules. The PMR quadtree is very good for answering queries such as ﬁnding the nearest line to a given point [34–37] (see [38] for an empirical comparison with hierarchical object representations such as the R-tree and R+ -tree). It is preferred over the PM1 quadtree (as well as the MX and edge quadtrees) as it results in far fewer subdivisions. In particular, in the PMR quadtree there is no need to subdivide in order to separate line segments that are very “close” or whose vertices are very “close,” which is the case for the PM1 quadtree. This is important since four blocks are created at each subdivision step. Thus when many subdivision steps that occur in the PM1 quadtree result in creating many empty blocks, the storage requirements of the PM1 quadtree will be considerably higher than those of the PMR quadtree. Generally, as the splitting threshold is increased, the storage requirements of the PMR quadtree decrease while the time necessary to perform operations on it will increase. Using a random image model and geometric probability, it has been shown [48], theoretically and empirically using both random and real map data, that for suﬃciently high values of the splitting threshold (i.e., ≥ 4), the number of nodes in a PMR quadtree is asymptotically proportional to the number of line segments and is independent of the maximum depth of the tree. In contrast, using the same model, the number of nodes in the PM1 quadtree is a product of the number of lines and the maximal depth of the tree (i.e., n for a 2n × 2n image). The same experiments and analysis for the MX quadtree conﬁrmed the results predicted by the Quadtree Complexity Theorem (see Section 16.4) which is that the number of nodes is proportional to the total length of the line segments. Observe that although a bucket in the PMR quadtree can contain more line segments than the splitting threshold, this is not a problem. In fact, it can be shown [63] that the maximum number of line segments in a bucket is bounded by the sum of the splitting threshold and the depth of the block (i.e., the number of times the original space has been decomposed to yield this block).

16.7

Research Issues and Summary

A review has been presented of a number of representations of multidimensional data. Our focus has been on multidimensional spatial data with extent rather than just multidimensional point data. There has been a particular emphasis on hierarchical representations. Such representations are based on the “divide-and-conquer” problem-solving paradigm. They are of interest because they enable focusing computational resources on the interesting subsets of data. Thus, there is no need to expend work where the payoﬀ is small. Although many of the operations for which they are used can often be performed equally as eﬃciently, or more so, with other data structures, hierarchical data structures are attractive because of their conceptual clarity and ease of implementation. When the hierarchical data structures are based on the principle of regular decomposition,

© 2005 by Chapman & Hall/CRC

16-24

Handbook of Data Structures and Applications

we have the added beneﬁt that diﬀerent data sets (often of diﬀering types) are in registration. This means that they are partitioned in known positions which are often the same or subsets of one another for the diﬀerent data sets. This is true for all the features including regions, points, rectangles, lines, volumes, etc. The result is that a query such as “ﬁnding all cities with more than 20,000 inhabitants in wheat growing regions within 30 miles of the Mississippi River” can be executed by simply overlaying the region (crops), point (i.e., cities), and river maps even though they represent data of diﬀerent types. Alternatively, we may extract regions such as those within 30 miles of the Mississippi River. Such operations ﬁnd use in applications involving spatial data such as geographic information systems. Current research in multidimensional representations is highly application-dependent in the sense that the work is driven by the application. Many of the recent developments have been motivated by the interaction with databases. The choice of a proper representation plays a key role in the speed with which responses are provided to queries. Knowledge of the underlying data distribution is also a factor and research is ongoing to make use of this information in the process of making a choice. Most of the initial applications in which the representation of multidimensional data has been important have involved spatial data of the kind described in this chapter. Such data is intrinsically of low dimensionality (i.e., two and three). Future applications involve higher dimensional data for applications such as image databases where the data are often points in feature space. Unfortunately, for such applications, the performance of most indexing methods that rely on a decomposition of the underlying space is often unsatisfactory when compared with not using an index at all (e.g., [16]). The problem is that for uniformly-distributed data, most of the data is found to be at or near the boundary of the space in which it lies [13]. The result means that the query region usually overlaps all of the leaf node regions that are created by the decomposition process and thus a sequential scan is preferable. This has led to a number of alternative representations that try to speed up the scan (e.g., VA-ﬁle [75], VA+ -ﬁle [21], IQ-tree [15], etc.). Nevertheless, representations such as the pyramid technique [14] are based on the principle that most of the data lies near the surface and therefore subdivide the data space as if it is an onion by peeling oﬀ hypervolumes that are close to its boundary. This is achieved by ﬁrst dividing the hypercube corresponding to the d-dimensional data space into 2d pyramids having the center of the data space as their top point and one of the faces of the hypercube as its base. These pyramids are subsequently cut into slices that are parallel to their base. Of course, the high-dimensional data is not necessarily uniformly-distributed which has led to other data structures with good performance (e.g., the hybrid tree [17]). Clearly, more work needs to be done in this area.

Acknowledgment This work was supported, in part, by the National Science Foundation under Grants EIA99-00268, IIS-00-86162, and EIA-00-91474 is gratefully acknowledged.

References [1] W. G. Aref and H. Samet. Uniquely reporting spatial objects: yet another operation for comparing spatial data structures. In Proceedings of the 5th International Symposium on Spatial Data Handling, pages 178–189, Charleston, SC, August 1992. [2] W. G. Aref and H. Samet. Hashing by proximity to process duplicates in spatial databases. In Proceedings of the 3rd International Conference on Information

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

[3]

[4]

[5]

[6] [7]

[8] [9] [10] [11] [12] [13]

[14]

[15]

[16]

[17]

[18] [19]

[20]

16-25

and Knowledge Management (CIKM), pages 347–354, Gaithersburg, MD, December 1994. D. Ayala, P. Brunet, R. Juan, and I. Navazo. Object representation by means of nonminimal division quadtrees and octrees. ACM Transactions on Graphics, 4(1):41– 59, January 1985. D. H. Ballard. Strip trees: a hierarchical representation for curves. Communications of the ACM, 24(5):310–321, May 1981. Also corrigendum, Communications of the ACM, 25(3):213, March 1982. B. G. Baumgart. A polyhedron representation for computer vision. In Proceedings of the 1975 National Computer Conference, vol. 44, pages 589–596, Anaheim, CA, May 1975. R. Bayer and E. M. McCreight. Organization and maintenance of large ordered indexes. Acta Informatica, 1(3):173–189, 1972. N. Beckmann, H.-P. Kriegel, R. Schneider, and B. Seeger. The R∗ -tree: an eﬃcient and robust access method for points and rectangles. In Proceedings of the ACM SIGMOD Conference, pages 322–331, Atlantic City, NJ, June 1990. J. L. Bentley. Multidimensional binary search trees used for associative searching. Communications of the ACM, 18(9):509–517, September 1975. J. L. Bentley. Algorithms for Klee’s rectangle problems. (unpublished), 1977. J. L. Bentley and J. H. Friedman. Data structures for range searching. ACM Computing Surveys, 11(4):397–409, December 1979. J. L. Bentley and H. A. Mauer. Eﬃcient worst-case data structures for range searching. Acta Informatica, 13:155–168, 1980. J. L. Bentley, D. F. Stanat, and E. H. Williams Jr. The complexity of ﬁnding ﬁxedradius near neighbors. Information Processing Letters, 6(6):209–212, December 1977. S. Berchtold, C. B¨ ohm, and H.-P. Kriegel. Improving the query performance of highdimensional index structures by bulk-load operations. In Advances in Database Technology — EDBT’98, Proceedings of the 6th International Conference on Extending Database Technology, pages 216–230, Valencia, Spain, March 1998. S. Berchtold, C. B¨ ohm, and H.-P. Kriegel. The pyramid-technique: Towards breaking the curse of dimensionality. In Proceedings of the ACM SIGMOD Conference, L. Hass and A. Tiwary, eds., pages 142–153, Seattle, WA, June 1998. S. Berchtold, C. B¨ ohm, H.-P. Kriegel, J. Sander, and H. V. Jagadish. Independent quantization: An index compression technique for high-dimensional data spaces. In Proceedings of the 16th IEEE International Conference on Data Engineering, pages 577–588, San Diego, CA, February 2000. K. S. Beyer, J. Goldstein, R. Ramakrishnan, and U. Shaft. When is “nearest neighbor” meaningful? In Proceedings of the 7th International Conference on Database Theory (ICDT’99), C. Beeri and P. Buneman, eds., pages 217–235, Berlin, Germany, January 1999. Also Springer-Verlag Lecture Notes in Computer Science 1540. K. Chakrabarti and S. Mehrotra. The hybrid tree: an index structure for high dimensional feature spaces. In Proceedings of the 15th IEEE International Conference on Data Engineering, pages 440–447, Sydney, Australia, March 1999. D. Comer. The ubiquitous B-tree. ACM Computing Surveys, 11(2):121–137, June 1979. J.-P. Dittrich and B. Seeger. Data redundancy and duplicate detection in spatial join processing. In Proceedings of the 16th IEEE International Conference on Data Engineering, pages 535–546, San Diego, CA, February 2000. H. Edelsbrunner. Dynamic rectangle intersection searching. Institute for Information Processing 47, Technical University of Graz, Graz, Austria, February 1980.

© 2005 by Chapman & Hall/CRC

16-26

Handbook of Data Structures and Applications

[21] H. Ferhatosmanoglu, E. Tuncel, D. Agrawal, and A. El Abbadi. Vector approximation based indexing for non-uniform high dimensional data sets. In Proceedings of the 9th International Conference on Information and Knowledge Management (CIKM), pages 202–209, McLean, VA, November 2000. [22] R. A. Finkel and J. L. Bentley. Quad trees: a data structure for retrieval on composite keys. Acta Informatica, 4(1):1–9, 1974. [23] A. U. Frank and R. Barrera. The Fieldtree: a data structure for geographic information systems. In Design and Implementation of Large Spatial Databases — 1st Symposium, SSD’89, A. Buchmann, O. G¨ unther, T. R. Smith, and Y.-F. Wang, eds., pages 29–44, Santa Barbara, CA, July 1989. Also Springer-Verlag Lecture Notes in Computer Science 409. [24] W. R. Franklin. Adaptive grids for geometric operations. Cartographica, 21(2&3):160– 167, Summer & Autumn 1984. [25] E. Fredkin. Trie memory. Communications of the ACM, 3(9):490–499, September 1960. [26] H. Freeman. Computer processing of line-drawing images. ACM Computing Surveys, 6(1):57–97, March 1974. [27] M. Freeston. The BANG ﬁle: a new kind of grid ﬁle. In Proceedings of the ACM SIGMOD Conference, pages 260–269, San Francisco, May 1987. [28] M. Freeston. A general solution of the n-dimensional B-tree problem. In Proceedings of the ACM SIGMOD Conference, pages 80–91, San Jose, CA, May 1995. [29] H. Fuchs, Z. M. Kedem, and B. F. Naylor. On visible surface generation by a priori tree structures. Computer Graphics, 14(3):124–133, July 1980. Also Proceedings of the SIGGRAPH’80 Conference, Seattle, WA, July 1980. [30] O. G¨ unther. Eﬃcient structures for geometric data management. PhD thesis, University of California at Berkeley, Berkeley, CA, 1987. Also Lecture Notes in Computer Science 337, Springer-Verlag, Berlin, West Germany, 1988; UCB/ERL M87/77. [31] A. Guttman. R-trees: a dynamic index structure for spatial searching. In Proceedings of the ACM SIGMOD Conference, pages 47–57, Boston, June 1984. [32] A. Henrich, H. W. Six, and P. Widmayer. The LSD tree: spatial access to multidimensional point and non-point data. In Proceedings of the 15th International Conference on Very Large Databases (VLDB), P. M. G. Apers and G. Wiederhold, eds., pages 45–53, Amsterdam, The Netherlands, August 1989. [33] K. Hinrichs and J. Nievergelt. The grid ﬁle: a data structure designed to support proximity queries on spatial objects. In Proceedings of WG’83, International Workshop on Graphtheoretic Concepts in Computer Science, M. Nagl and J. Perl, eds., pages 100–113, Trauner Verlag, Linz, Austria, 1983. [34] G. R. Hjaltason and H. Samet. Ranking in spatial databases. In Advances in Spatial Databases — 4th International Symposium, SSD’95, M. J. Egenhofer and J. R. Herring, eds., pages 83–95, Portland, ME, August 1995. Also Springer-Verlag Lecture Notes in Computer Science 951. [35] G. R. Hjaltason and H. Samet. Distance browsing in spatial databases. ACM Transactions on Database Systems, 24(2):265–318, June 1999. Also Computer Science TR-3919, University of Maryland, College Park, MD. [36] G. R. Hjaltason and H. Samet. Index-driven similarity search in metric spaces. ACM Transactions on Database Systems, 2003. To appear. [37] E. G. Hoel and H. Samet. Eﬃcient processing of spatial queries in line segment databases. In Advances in Spatial Databases — 2nd Symposium, SSD’91, O. G¨ unther and H.-J. Schek, eds., pages 237–256, Zurich, Switzerland, August 1991. Also Springer-Verlag Lecture Notes in Computer Science 525.

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-27

[38] E. G. Hoel and H. Samet. A qualitative comparison study of data structures for large line segment databases. In Proceedings of the ACM SIGMOD Conference, M. Stonebraker, ed., pages 205–214, San Diego, CA, June 1992. [39] G. M. Hunter. Eﬃcient computation and data structures for graphics. PhD thesis, Department of Electrical Engineering and Computer Science, Princeton University, Princeton, NJ, 1978. [40] G. M. Hunter and K. Steiglitz. Operations on images using quad trees. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1(2):145–153, April 1979. [41] E. Jacox and H. Samet. Iterative spatial join. ACM Transactions on Database Systems, 28(3):268–294, September 2003. [42] G. Kedem. The quad-CIF tree: a data structure for hierarchical on-line algorithms. In Proceedings of the 19th Design Automation Conference, pages 352–357, Las Vegas, NV, June 1982. [43] A. Klinger. Patterns and search statistics. In Optimizing Methods in Statistics, J. S. Rustagi, ed., pages 303–337. Academic Press, New York, 1971. [44] K. Knowlton. Progressive transmission of grey-scale and binary pictures by simple eﬃcient, and lossless encoding schemes. Proceedings of the IEEE, 68(7):885–896, July 1980. [45] D. E. Knuth. The Art of Computer Programming: Sorting and Searching, vol. 3. Addison-Wesley, Reading, MA, 1973. [46] D. E. Knuth. Big omicron and big omega and big theta. SIGACT News, 8(2):18–24, April-June 1976. [47] G. L. Lai, D. Fussell, and D. F. Wong. HV/VH trees: a new spatial data structure for fast region queries. In Proceedings of the 30th ACM/IEEE Design Automation Conference, pages 43–47, Dallas, June 1993. [48] M. Lindenbaum and H. Samet. A probabilistic analysis of trie-based sorting of large collections of line segments. Computer Science Department TR-3455, University of Maryland, College Park, MD, April 1995. [49] D. Lomet and B. Salzberg. The hB–tree: a multi-attribute indexing method with good guaranteed performance. ACM Transactions on Database Systems, 15(4):625–658, December 1990. Also Northeastern University Technical Report NU-CCS-87-24. [50] E. M. McCreight. Eﬃcient algorithms for enumerating intersecting intervals and rectangles. Technical Report CSL-80-09, Xerox Palo Alto Research Center, Palo Alto, CA, June 1980. [51] E. M. McCreight. Priority search trees. SIAM Journal on Computing, 14(2):257–276, May 1985. [52] D. Meagher. Octree encoding: a new technique for the representation, manipulation, and display of arbitrary 3-D objects by computer. Electrical and Systems Engineering IPL-TR-80-111, Rensselaer Polytechnic Institute, Troy, NY, October 1980. [53] D. Meagher. Geometric modeling using octree encoding. Computer Graphics and Image Processing, 19(2):129–147, June 1982. [54] R. C. Nelson and H. Samet. A consistent hierarchical representation for vector data. Computer Graphics, 20(4):197–206, August 1986. Also Proceedings of the SIGGRAPH’86 Conference, Dallas, TX, August 1986. [55] J. Nievergelt, H. Hinterberger, and K. C. Sevcik. The grid ﬁle: an adaptable, symmetric multikey ﬁle structure. ACM Transactions on Database Systems, 9(1):38–71, March 1984. [56] J. A. Orenstein. Multidimensional tries used for associative searching. Information Processing Letters, 14(4):150–157, June 1982. [57] F. P. Preparata and M. I. Shamos. Computational Geometry: An Introduction.

© 2005 by Chapman & Hall/CRC

16-28

Handbook of Data Structures and Applications

Springer–Verlag, New York, 1985. [58] A. A. G. Requicha. Representations of rigid solids: theory, methods, and systems. ACM Computing Surveys, 12(4):437–464, December 1980. [59] J. T. Robinson. The K-D-B-tree: a search structure for large multidimensional dynamic indexes. In Proceedings of the ACM SIGMOD Conference, pages 10–18, Ann Arbor, MI, April 1981. [60] H. Samet. Applications of Spatial Data Structures: Computer Graphics, Image Processing, and GIS. Addison-Wesley, Reading, MA, 1990. [61] H. Samet. Decoupling: A spatial indexing solution. Computer Science TR-4523, University of Maryland, College Park, MD, August 2003. [62] H. Samet. Foundations of Multidimensional Data Structures. To appear, 2004. [63] H. Samet. The Design and Analysis of Spatial Data Structures. Addison-Wesley, Reading, MA, 1990. [64] H. Samet, C. A. Shaﬀer, and R. E. Webber. Digitizing the plane with cells of non– uniform size. Information Processing Letters, 24(6):369–375, April 1987. [65] H. Samet and M. Tamminen. Eﬃcient component labeling of images of arbitrary dimension represented by linear bintrees. IEEE Transactions on Pattern Analysis and Machine Intelligence, 10(4):579–586, July 1988. [66] H. Samet and R. E. Webber. Storing a collection of polygons using quadtrees. ACM Transactions on Graphics, 4(3):182–222, July 1985. Also Proceedings of Computer Vision and Pattern Recognition’83, pages 127–132, Washington, DC, June 1983 and University of Maryland Computer Science TR-1372. [67] T. Sellis, N. Roussopoulos, and C. Faloutsos. The R+ –tree: A dynamic index for multidimensional objects. In Proceedings of the 13th International Conference on Very Large Databases (VLDB), P. M. Stocker and W. Kent, eds., pages 71–79, Brighton, United Kingdom, September 1987. Also Computer Science TR-1795, University of Maryland, College Park, MD. [68] M. Shneier. Two hierarchical linear feature representations: edge pyramids and edge quadtrees. Computer Graphics and Image Processing, 17(3):211–224, November 1981. [69] J.-W. Song, K.-Y. Whang, Y.-K. Lee, M.-J. Lee, and S.-W. Kim. Spatial join processing using corner transformation. IEEE Transactions on Knowledge and Data Engineering, 11(4):688–695, July/August 1999. [70] M. Stonebraker, T. Sellis, and E. Hanson. An analysis of rule indexing implementations in data base systems. In Proceedings of the 1st International Conference on Expert Database Systems, pages 353–364, Charleston, SC, April 1986. [71] M. Tamminen. The EXCELL method for eﬃcient geometric access to data. Acta Polytechnica Scandinavica, 1981. Also Mathematics and Computer Science Series No. 34. [72] M. Tamminen. Comment on quad- and octtrees. Communications of the ACM, 27(3):248–249, March 1984. [73] W. Wang, J. Yang, and R. Muntz. PK-tree: a spatial index structure for high dimensional point data. In Proceedings of the 5th International Conference on Foundations of Data Organization and Algorithms (FODO), K. Tanaka and S. Ghandeharizadeh, eds., pages 27–36, Kobe, Japan, November 1998. [74] J. E. Warnock. A hidden surface algorithm for computer generated half tone pictures. Computer Science Department TR 4–15, University of Utah, Salt Lake City, June 1969. [75] R. Weber, H.-J. Schek, and S. Blott. A quantitative analysis and performance study for similarity-search methods in high-dimensional spaces. In Proceedings of the 24th In-

© 2005 by Chapman & Hall/CRC

Multidimensional Spatial Data Structures

16-29

ternational Conference on Very Large Data Bases (VLDB), A. Gupta, O. Shmueli, and J. Widom, eds., pages 194–205, New York, August 1998.

© 2005 by Chapman & Hall/CRC

17 Planar Straight Line Graphs

Siu-Wing Cheng Hong Kong University of Science and Technology

17.1

17.1 17.2 17.3 17.4 17.5 17.6 17.7 17.8

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-1 Features of PSLGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-2 Operations on PSLGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-3 Winged-Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-5 Halfedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-7 Quadedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-13 Further Remarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-15 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-16

Introduction

Graphs (Chapter 4) have found extensive applications in computer science as a modeling tool. In mathematical terms, a graph is simply a collection of vertices and edges. Indeed, a popular graph data structure is the adjacency lists representation [14] in which each vertex keeps a list of vertices connected to it by edges. In a typical application, the vertices model entities and an edge models a relation between the entities corresponding to the edge endpoints. For example, the transportation problem calls for a minimum cost shipping pattern from a set of origins to a set of destinations [2]. This can be modeled as a complete directed bipartite graph. The origins and destinations are represented by two columns of vertices. Each origin vertex is labeled with the amount of supply stored there. Each destination vertex is labeled with the amount of demand required there. The edges are directed from the origin vertices to the destination vertices and each edge is labeled with the unit cost of transportation. Only the adjacency information between vertices and edges are useful and captured, apart from the application dependent information. In geometric computing, graphs are also useful for representing various diagrams. We restrict our attention to diagrams that are planar graphs embedded in the plane using straight edges without edge crossings. Such diagrams are called planar straight line graphs and denoted by PSLGs for short. Examples include Voronoi diagrams, arrangements, and triangulations. Their deﬁnitions can be found in standard computational geometry texts such as the book by de Berg et al. [3]. See also Chapters 62, 63 and 64. For completeness, we also provide their deﬁnitions in section 17.8. The straight edges in a PSLG partition the plane into regions with disjoint interior. We call these regions faces. The adjacency lists representation is usually inadequate for applications that manipulate PSLGs. Consider the problem of locating the face containing a query point in a Delaunay triangulation. One practical algorithm is to walk towards the query point from a randomly chosen starting vertex [11], see Figure 17.1. To support this algorithm, one needs to know the ﬁrst face

17-1

© 2005 by Chapman & Hall/CRC

17-2

Handbook of Data Structures and Applications

FIGURE 17.1: Locate the face containing the cross by walking from a randomly chosen vertex.

that we enter as well as the next face that we step into whenever we cross an edge. Such information is not readily provided by an adjacency lists representation. There are three well-known data structures for representing PSLGs: the winged-edge, halfedge, and quadedge data structures. In Sections 17.2 and 17.3, we discuss the PSLGs that we deal with in more details and the operations on PSLGs. Afterwards, we introduce the three data structures in Section 17.4–17.6. We conclude in Section 17.7 with some further remarks.

17.2

Features of PSLGs

We assume that each face has exactly one boundary and we allow dangling edges on a face boundary. These assumptions are valid for many important classes of PSLGs such as triangulations, Voronoi diagrams, planar subdivisions with no holes, arrangements of lines, and some special arrangements of line segments (see Figure 17.2).

FIGURE 17.2: Dangling edges.

There is at least one unbounded face in a PSLG but there could be more than one, for example, in the arrangement of lines shown in Figure 17.3. The example also shows that there may be some inﬁnite edges. To handle inﬁnite edges like halﬂines and lines, we need a special vertex vinf at inﬁnity. One can imagine that the PSLG is placed in a small almost ﬂat disk D at the north pole of a giant sphere S and vinf is placed at the south pole. If an edge e is a halﬂine originating from a vertex u, then the endpoints of e are u and vinf .

© 2005 by Chapman & Hall/CRC

Planar Straight Line Graphs

17-3

FIGURE 17.3: The shaded faces are the unbounded faces of the arrangement.

One can view e as a curve on S from u near the north pole to vinf at the south pole, but e behaves as a halﬂine inside the disk D. If an edge e is a line, then vinf is the only endpoint of e. One can view e as a loop from vinf to the north pole and back, but e behaves as a line inside the disk D. We do not allow isolated vertices, except for vinf . Planarity implies that the incident edges of each vertex are circularly ordered around that vertex. This applies to vinf as well. A PSLG data structure keeps three kinds of attributes: vertex attributes, edge attributes, and face attributes. The attributes of a vertex include its coordinates except for vinf (we assume that vinf is tagged to distinguish it from other vertices). The attributes of an edge include the equation of the support line of the edge (in the form of Ax + By + C = 0). The face attributes are useful for auxiliary information, e.g., color.

17.3

Operations on PSLGs

The operations on a PSLG can be classiﬁed into access functions and structural operations. The access functions retrieve information without modifying the PSLG. Since the access functions partly depend on the data structure, we discuss them later when we introduce the data structures. In this section, we discuss four structural operations on PSLGs: edge insertion, edge deletion, vertex split, and edge contraction. We concentrate on the semantics of these four operations and discuss the implementation details later when we introduce the data structures. For vertex split and edge contraction, we assume further that each face in the PSLG is a simple polygon as these two operations are usually used under such circumstances. Edge insertion and deletion

When a new edge e with endpoints u and v is inserted, we assume that e does not cross any existing edge. If u or v is not an existing vertex, the vertex will be created. If both u and v are new vertices, e is an isolated edge inside a face f . Since each face is assumed to have exactly one boundary, this case happens only when the PSLG is empty and f is the entire plane. Note that e becomes a new boundary of f . If either u or v is a new vertex, then the boundary of exactly one face gains the edge e. If both u and v already exist, then u and v lie on the boundary of a face which is split into two new faces by the insertion of e. These cases are illustrated in Figure 17.4. The deletion of an edge e has the opposite eﬀects. After the deletion of e, if any of its endpoint becomes an isolated vertex, it will be removed. The vertex vinf is an exception and it is the only possible isolated vertex. The edge insertion is clearly needed to create

© 2005 by Chapman & Hall/CRC

17-4

Handbook of Data Structures and Applications

e

e

(a)

(b)

e

(c )

FIGURE 17.4: Cases in edge insertion.

a PSLG from scratch. Other eﬀects can be achieved by combining edge insertions and deletions appropriately. For example, one can use the two operations to overlay two PSLGs in a plane sweep algorithm, see Figure 17.5. a

b

a

b

d

c

delete ac and bd d

c

a

b insert av, bv, cv, and dv

v d

c

FIGURE 17.5: Intersecting two edges.

Vertex split and edge contraction

The splitting of a vertex v is best visualized as the continuous morphing of v into an edge e. Depending on the speciﬁcation of the splitting, an incident face of v gains e on its boundary or an incident edge of v is split into a triangular face, see Figure 17.6. The incident edges of v are displaced and it is assumed that no self-intersection occurs within the PSLG during the splitting. The contraction of an edge e is the inverse of the vertex split. We also assume that no self-intersection occurs during the edge contraction. If e is incident on a triangular face, that face will disappear after the contraction of e. Not every edge can be contracted. Consider an edge ab. If the PSLG contains a cycle abv that is not the boundary of any face incident to ab, we call the edge ab non-contractible because its contraction is not cleanly deﬁned. Figure 17.7 shows an example. In the ﬁgure, after the contraction, there is an ambiguity whether dv should be incident on the face f1 or the face f2 . In fact, one would expect the edge dv to behave like av and bv and be incident on both f1 and f2 after the contraction. However, this is impossible. The vertex split and edge contraction have been used in clustering and hierarchical drawing of maximal planar graphs [6].

© 2005 by Chapman & Hall/CRC

Planar Straight Line Graphs

17-5

split d to ab

d

a

b

contract ab to d

FIGURE 17.6: Vertex split and edge contraction.

a

c

f1

d

b

contract ab to d

f2

f1

v

c

f2

v

FIGURE 17.7: Non-contractible edge.

17.4

Winged-Edge

The winged-edge data structure was introduced by Baumgart [1] and it predates the halfedge and quadedge data structures. There are three kinds of records: vertex records, edge records, and face records. Each vertex record keeps a reference to one incident edge of the vertex. Each face record keeps a reference to one boundary edge of the face. Each edge e is stored as an oriented edge with the following references (see Figure 17.8): • The origin endpoint e.org and the destination endpoint e.dest of e. The convention is that e is directed from e.org to e.dest. • The faces e.left and e.right on the left and right of e, respectively. • The two edges e.lcw and e.lccw adjacent to e that bound the face e.left. The edge e.lcw is incident to e.org and the edge e.lccw is incident to e.dest. Note that e.lcw (resp. e.lccw ) succeeds e if the boundary of e.left is traversed in the clockwise (resp. anti-clockwise) direction from e. • The two edges e.rcw and e.rccw adjacent to e that bound the face e.right. The edge e.rcw is incident to e.dest and the edge e.rccw is incident to e.org. Note that e.rcw (resp. e.rccw ) succeeds e if the boundary of e.right is traversed in the clockwise (resp. anti-clockwise) direction from e. The information in each edge record can be retrieved in constant time. Given a vertex v, an edge e, and a face f , we can thus answer in constant time whether v is incident on e and e is incident on f . Given a vertex v, we can traverse the edges incident to v in clockwise order as follows. We output the edge e kept at the vertex record for v. We perform e := e.rccw if v = e.org and e := e.lccw otherwise. Then we output e and repeat the above. Given a face f , we can traverse its boundary edges in clockwise order as follows. We output the edge e kept at the face record for f . We perform e := e.lcw if f = e.left and e := e.rcw otherwise.

© 2005 by Chapman & Hall/CRC

17-6

Handbook of Data Structures and Applications e.lcw

e.lccw e.left

e.org

e.rccw

e e.right

e.dest

e.rcw

FIGURE 17.8: Winged-edge data structure.

Then we output e and repeat the above. Note that an edge reference does not carry information about the orientation of the edge. Also, the orientations of the boundary edges of a face need not be consistent with either the clockwise or anti-clockwise traversal. Thus, the manipulation of the data structure is often complicated by case distinctions. We illustrate this with the insertion of an edge e. Assume that e.org = u, e.dest = v, and both u and v already exist. The input also speciﬁes two edges e1 and e2 incident to u and v, respectively. The new edge e is supposed to immediately succeed e1 (resp. e2 ) in the anti-clockwise ordering of edges around u (resp. v). The insertion routine works as follows. 1. If u = vinf and it is isolated, we need to store the reference to e in the vertex record for u. We update the vertex record for v similarly. 2. Let e3 be the incident edge of u following e1 such that e is to be inserted between e1 and e3 . Note that e3 succeeds e1 in anti-clockwise order. We insert e between e1 and e3 as follows. e.rccw := e1 ; e.lcw := e3 ; if e.org = e1 .org then e1 .lcw := e; else e1 .rcw := e; if e.org = e3 .org then e3 .rccw := e; else e3 .lccw := e; 3. Let e4 be the incident edge of v following e2 such that e is to be inserted between e2 and e4 . Note that e4 succeeds e2 in anti-clockwise order. We insert e between e2 and e4 as follows. e.lccw := e2 ; e.rcw := e4 ; if e.dest = e2 .dest then e2 .rcw := e; else e2 .lcw := e; if e.dest = e4 .dest then e4 .lccw := e; else e4 .rccw := e; 4. The insertion of e has split a face into two. So we create a new face f and make e.left reference it. Also, we store a reference to e in the face record for f . There are further ramiﬁcations. First, we make e.right reference the old face. if e.org = e1 .org then e.right := e1 .left ; else e.right := e1 .right ; Second, we make the left or right ﬁelds of the boundary edges of f reference f . e := e; w := e.org; repeat if e .org = w then e .left := f ; w := e .dest ; e := e .lccw else e .right := f ; w := e .org; e := e .rccw until e = e; Notice the inconvenient case distinctions needed in steps 2, 3, and 4. The halfedge data structure is designed to keep both orientations of the edges and link them properly. This eliminates most of these case distinctions as well as simpliﬁes the storage scheme.

© 2005 by Chapman & Hall/CRC

Planar Straight Line Graphs

17.5

17-7

Halfedge

In the halfedge data structure, for each edge in the PSLG, there are two symmetric edge records for the two possible orientations of the edge [15]. This solves the orientation problem in the winged-edge data structure. The halfedge data structure is also known as the doubly connected edge list [3]. We remark that the name doubly connected edge list was ﬁrst used to denote the variant of the winged-edge data structure in which the lccw and rccw ﬁelds are omitted [12, 13]. There are three kinds of records: vertex records, halfedge records, and face records. Let e be a halfedge. The following information is kept at the record for e (see Figure 17.9). • The reference e.sym to the symmetric version of e. • The origin endpoint e.org of e. We do not need to store the destination endpoint of e since it can be accessed as e.sym.org. The convention is that e is directed from e.org to e.sym.org. • The face e.left on the left of e. • The next edge e.succ and the previous edge e.pred in the anti-clockwise traversal around the face e.left. For each vertex v, its record keeps a reference to one halfedge v.edge such that v = v.edge.org . For each face f , its record keeps a reference to one halfedge f.edge such that f = f.edge.left . e.pred

e.org

e.left

e.succ

e e.sym

FIGURE 17.9: Halfedge data structure.

We introduce two basic operations make halfedges and half splice which will be needed for implementing the operations on PSLGs. These two operations are motivated by the operations make edge and splice introduced by Guibas and Stolﬁ [8] for the quadedge data structure. We can also do without make halfedges and half splice, but they make things simpler. • make halfedges(u, v): Return two halfedges e and e.sym connecting the points u and v. The halfedges e and e.sym are initialized such that they represent a new PSLG with e and e.sym as the only halfedges. That is, e.succ = e.sym = e.pred and e.sym.succ = e = e.sym.pred . Also, e is the halfedge directed from u to v. If u and v are omitted, it means that the actual coordinates of e.org and e.sym.org are unimportant. • half splice(e1 , e2 ): Given two halfedges e1 and e2 , half splice swaps the contents of e1 .pred and e2 .pred and the contents of e1 .pred .succ and e2 .pred .succ. The eﬀects are: – Let v = e2 .org. If e1 .org = v, the incident halfedges of e1 .org and e2 .org are merged into one circular list (see Figure 17.10(a)). The vertex v is now

© 2005 by Chapman & Hall/CRC

17-8

Handbook of Data Structures and Applications succ pred

e1

e1

e2

e2

succ pred

(a)

e2

succ pred

e1

e2

e1

(b) FIGURE 17.10: The eﬀects of half splice. redundant and we ﬁnish the merging as follows. e := e2 ; repeat e .org := e1 .org; e := e .sym.succ; until e = e2 ; delete the vertex record for v; – Let v = e2 .org. If e1 .org = v, the incident halfedges of v are separated into two circular lists (see Figure 17.10(b)). We create a new vertex u for e2 .org with the coordinates of u left uninitialized. Then we ﬁnish the separation as follows. u.edge := e2 ; e := e2 ; repeat e .org := u; e := e .sym.succ; until e = e2 .

© 2005 by Chapman & Hall/CRC

Planar Straight Line Graphs

17-9

The behavior of half splice is somewhat complex even in the following special cases. If e is an isolated halfedge, half splice(e1 , e) deletes the vertex record for e.org and makes e a halfedge incident to e1 .org following e1 in anti-clockwise order. If e1 = e.sym.succ, half splice(e1 , e) detaches e from the vertex e1 .org and creates a new vertex record for e.org. If e1 = e, half splice(e, e) has no eﬀect at all. Access functions

The information in each halfedge record can be retrieved in constant time. Given a vertex v, a halfedge e, and a face f , we can thus answer the following adjacency queries: 1: Is v incident on e? This is done by checking if v = e.org or e.sym.org. 2: Is e incident on f ? This is done by checking if f = e.left . 3: List the halfedges with origin v in clockwise order. Let e = v.edge. Output e, perform e := e.sym.succ, and then repeat until we return to v.edge. 4: List the boundary halfedges of f in anti-clockwise order. Let e = f.edge. Output e, perform e := e.succ, and then repeat until we return to f.edge. Other adjacency queries (e.g., listing the boundary vertices of a face) can be answered similarly. Edge insertion and deletion

The edge insertion routine takes two vertices u and v and two halfedges e1 and e2 . If u is a new vertex, e1 is ignored; otherwise, we assume that e1 .org = u. Similarly, if v is a new vertex, e2 is ignored; otherwise, we assume that e2 .org = v. The general case is that an edge connecting u and v is inserted between e1 and e1 .pred .sym and between e2 and e2 .pred .sym. The two new halfedges e and e.sym are returned with the convention that e is directed from u to v. Algorithm insert(u, v, e1, e2 ) 1. (e, e.sym) := make halfedges(u, v); 2. if u is not new 3. then half splice(e1 , e); 4. e.left := e1 .left ; 5. e.sym.left := e1 .left ; 6. if v is not new 7. then half splice(e2 , e.sym); 8. e.left := e2 .left ; 9. e.sym.left := e2 .left ; 10. if neither u nor v is new 11. then /* A face has been split */ 12. e2 .left .edge := e; 13. create a new face f ; 14. f.edge := e.sym; 15. e := e.sym; 16. repeat 17. e .left := f ; 18. e := e .succ; 19. until e = e.sym; 20. return (e, e.sym);

© 2005 by Chapman & Hall/CRC

17-10

Handbook of Data Structures and Applications

e.sym e

e.sym e

(a)

(b)

e e.sym

(c)

FIGURE 17.11: Cases in deletion. The following deletion algorithm takes the two halfedges e and e.sym corresponding to the edge to be deleted. If the edge to be deleted borders two adjacent faces, they have to be merged after the deletion. Algorithm delete(e, e.sym) 1. if e.left = e.sym.left 2. then /* Figure 17.11(a) */ 3. /* the faces adjacent to e and e.sym are to be merged */ 4. delete the face record for e.sym.left ; 5. e := e.sym; 6. repeat 7. e .left := e.left ; 8. e := e .succ; 9. until e = e.sym; 10. e.left .edge := e.succ; 11. half splice(e.sym.succ, e); 12. half splice(e.succ, e.sym); 13. else if e.succ = e.sym 14. then /* Figure 17.11(b) */ 15. e.left .edge := e.pred ; 16. half splice(e.sym.succ, e); 17. else /* Figure 17.11(c) */ 18. e.left .edge := e.succ; 19. half splice(e.succ, e.sym); 20. /* e becomes an isolated edge */ 21. delete the vertex record for e.org if e.org = vinf ; 22. delete the vertex record for e.sym.org if e.sym.org = vinf ; 23. delete the halfedges e and e.sym; Vertex split and edge contraction

Recall that each face is assumed to be a simple polygon for the vertex split and edge contraction operations. The vertex split routine takes two points (p, q) and (x, y) and four halfedges e1 , e2 , e3 , and e4 in anti-clockwise order around the common origin v. It is required that either e1 = e2 or e1 .pred = e2 .sym and either e3 = e4 or e3 .pred = e4 .sym. The routine splits v into an edge e connecting the points (p, q) and (x, y). Also, e borders the faces bounded by e1 and e2 and by e3 and e4 . Note that if e1 = e2 , we create a new face bounded by e1 , e2 , and e. Similarly, a new face is created if e3 = e4 . The following is the vertex split algorithm.

© 2005 by Chapman & Hall/CRC

Planar Straight Line Graphs

17-11

e1

e4

e1

e4

e1

e4

e2

e3

e2

e3

e2

e3

(a )

a

e4

a

e4

e1

e3

e1

e3

a

e4 e3

e1

(b)

u e1

u

e e3

e1

e

e3

e3

e1

(c)

e1

b

e1

b

e2

e3

e2

e3

b e

(d)

FIGURE 17.12: Cases for split.

Algorithm split(p, q, x, y, e1, e2 , e3 , e4 ) 1. if e1 = e2 and e3 = e4 2. then /* Figure 17.12(a) */ 3. half splice(e1 , e3 ); 4. insert(e1 .org, e3 .org, e1 , e3 ); 5. set the coordinates of e3 .org to (x, y); 6. set the coordinates of e1 .org to (p, q);

© 2005 by Chapman & Hall/CRC

e1 e2

e3

17-12

Handbook of Data Structures and Applications 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.

else if e1 = e2 then a := e1 .sym.succ; if a = e3 then /* Figure 17.12(b) */ half splice(a, e3 ); insert(a.org, e3 .org, a, e3 ); insert(a.org, e1 .sym.org, a, e1 .sym); set the coordinates of a.org to (x, y); else /* Figure 17.12(c) */ let u be a new vertex at (x, y); (e, e.sym) := insert(u, e1 .org, ·, e3 ); insert(u, e1 .sym.org, e, e1 .sym); insert(u, e3 .sym.org, e, e3 .succ); set the coordinates of e1 .org to (p, q); else b := e3 .pred .sym; /* since e1 = e2 , b = e2 */ /* Figure 17.12(d) */ half splice(e1 , e3 ); (e, e.sym) := insert(b.org, e3 .org, e1 , e3 ); insert(b.org, e3 .sym.org , e, e3 .succ); set the coordinates of b.org to (x, y); set the coordinates of e3 .org to (p, q);

The following algorithm contracts an edge to a point (x, y), assuming that the edge contractibility has been checked. Algorithm contract(e, e.sym, x, y) 1. e1 := e.succ; 2. e2 := e.pred .sym; 3. e3 := e.sym.succ; 4. e4 := e.sym.pred .sym; 5. delete(e, e.sym); 6. if e1 .succ = e2 .sym and e3 .succ = e4 .sym 7. then /* Figure 17.13(a) */ 8. half splice(e1 , e3 ); 9. else if e1 .succ = e2 .sym and e3 .succ = e4 .sym 10. then /* Figure 17.13(b) */ 11. delete(e2 , e2 .sym); 12. half splice(e1 , e3 ); 13. else if e1 .succ = e2 .sym and e3 .succ = e4 .sym 14. then /* symmetric to Figure 17.13(b) */ 15. delete(e4 , e4 .sym); 16. half splice(e1 , e3 ); 17. else /* Figure 17.13(c) */ 18. a := e3 .sym.succ; 19. delete(e3 , e3 .sym); 20. if a = e2 21. then delete(e2 , e2 .sym); 22. half splice(e1 , a); 23. else delete(e2 , e2 .sym); 24. set the coordinates of e1 .org to (x, y);

© 2005 by Chapman & Hall/CRC

Planar Straight Line Graphs

e1

e2

17-13

e4

e1 e2

e3

e4 e3

(a)

e4

e1

e4

e4

e1

e1 e2

e3

e3

e3

(b)

e1

e4

e2

e1

e4

e4 a

e3 a

e1

a

(c)

FIGURE 17.13: Cases for contract.

17.6

Quadedge

The quadedge data structure was introduced by Guibas and Stolﬁ [8]. It represents the planar subdivision and its dual simultaneously. The dual S ∗ of a PSLG S is constructed as follows. For each face of S, put a dual vertex inside the face. For each edge of S bordering the faces f and f , put a dual edge connecting the dual vertices of f and f . The dual of a vertex v in S is a face and this face is bounded by the dual of the incident edges of v. Figure 17.14 shows an example. The dual may have loops and two vertices may be connected by more than one edge, so the dual may not be a PSLG. Nevertheless, the quadedge data structure is expressive enough to represent the dual. In fact, it is powerful enough to represent subdivisions of both orientable and non-orientable surfaces. We describe a simpliﬁed version suﬃcient for our purposes. Each edge e in the PSLG is represented by four quadedges e[i], where i ∈ {0, 1, 2, 3}. The quadedges e[0] and e[2] are the two oriented versions of e. The quadedges e[1] and e[3] are the two oriented versions of the dual of e. These four quadedges are best viewed as a cross such as e[i + 1] is obtained by rotating e[i] for π/2 in the anti-clockwise direction. This is illustrated in Figure 17.15. The quadedge e[i] has a next ﬁeld referencing the quadedge that has the same origin as e[i] and follows e[i] in anti-clockwise order. In eﬀect, the next ﬁelds form a circular linked list of quadedges with a common origin. This is called an edge ring.

© 2005 by Chapman & Hall/CRC

17-14

Handbook of Data Structures and Applications

FIGURE 17.14: The solid lines and black dots show a PSLG and the dashed lines and the white dots denote the dual.

e[1] e[0] e[2] e[3]

FIGURE 17.15: Quadedges.

The following primitives are needed. • rot(e, i): Return e[(i + 1) mod 4]. • rot−1 (e, i): Return e[(i + 3) mod 4]. • sym(e, i): This function returns the quadedge with the opposite orientation of e[i]. This is done by returning rot(rot(e, i)). • onext(e, i): Return e[i].next. • oprev(e, i): This function gives the quadedge that has the same origin as e[i] and follows e[i] in clockwise order. This is done by returning rot(e[(i+1) mod 4].next). The quadedge data structure is entirely edge based and there are no explicit vertex and face records. The following two basic operations make edge and splice are central to the operations on PSLGs supported by the quadedge data structure. Our presentation is slightly diﬀerent from that in the original paper [8]. • make edge(u, v): Return an edge e connecting the points u and v. The quadedges e[i] where 0 ≤ i ≤ 3 are initialized such that they represent a new PSLG with e as the only edge. Also, e[0] is the quadedge directed from u to v. If u and v are omitted, it means that the actual coordinates of the endpoints of are unimportant. • splice(a, i, b, j): Given two quadedges a[i] and b[j], let (c, k) = rot(a[i].next) and (d, l) = rot(b[j].next), splice swaps the contents of a[i].next and b[j].next and the contents of c[k].next and d[l].next. The eﬀects on the edge rings of the origins of a[i] and b[j] and the edge rings of the origins of c[k] and d[l] are:

© 2005 by Chapman & Hall/CRC

Planar Straight Line Graphs

17-15

a[i ].next

a[i ].next

a[ i ]

a[ i ]

b[j ].next

b[j ].next

b[ j ]

b[ j ]

(a) a[i ].next a[i ].next b[j ] b[ j ]

a[i ] a[i ] b[j ].next b[j ].next

(b) FIGURE 17.16: The eﬀects of splice.

– If the two rings are diﬀerent, they are merged into one (see Figure 17.16(a)). – If the two rings are the same, it will be split into two separate rings (see Figure 17.16(b)). Notice that make edge and splice are similar to the operations make halfedges and half splice introduced for the halfedge data structure in the previous section. As mentioned before, they inspire the deﬁnitions of make halfedges and half splice. Due to this similarity, one can easily adapt the edge insertion, edge deletion, vertex split, and edge contraction algorithms in the previous section for the quadedge data structure.

17.7

Further Remarks

We have assumed that each face in the PSLG has exactly one boundary. This requirement can be relaxed for the winged-edge and the halfedge data structures. One method works as follows. For each face f , pick one edge from each boundary and keep a list of references to these edges at the face record for f . Also, the edge that belongs to outer boundary of f is specially tagged. With this modiﬁcation, one can traverse the boundaries of a face

© 2005 by Chapman & Hall/CRC

17-16

Handbook of Data Structures and Applications

f consistently (e.g., keeping f on the left of traversal direction). The edge insertion and deletion algorithms also need to be enhanced. Since a face f may have several boundaries, inserting an edge may combine two boundaries without splitting f . If the insertion indeed splits f , one needs to distribute the other boundaries of f into the two faces resulting from the split. The reverse eﬀects of edge deletion should be taken care of similarly. The halfedge data structure has also been used for representing orientable polyhedral surfaces [10]. The full power of the quadedge data structure is only realized when one deals with both subdivisions of orientable and non-orientable surfaces. To this end, one needs to introduce a ﬂip bit to allow viewing the surface from the above or below. The primitives need to be enhanced for this purpose. The correctness of the data structure is proven formally using edge algebra. The details are in the Guibas and Stolﬁ’s original paper [8]. The vertex split and edge contraction are also applicable for polyhedral surfaces. The edge contractibility criteria carries over straightforwardly. Edge contraction is a popular primitive for surface simpliﬁcation algorithms [4, 7, 9]. The edge contractibility criteria for non-manifolds has also been studied [5].

17.8

Glossary

Arrangements. Given a collection of lines, we split each line into edges by inserting a vertex at every intersection on the line. The resulting PSLG is called the arrangement of lines. The arrangement of line segments is similarly deﬁned. Voronoi diagram. Let S be a set of points in the plane. For each point p ∈ S, the Voronoi region of p is deﬁned to be {x ∈ R2 : p − x ≤ q − x , ∀q ∈ S}. The Voronoi diagram of S is the collection of all Voronoi regions (including their boundaries). Triangulation. Let S be a set of points in the plane. Any maximal PSLG with the points in S as vertices is a triangulation of S. Delaunay triangulation. Let S be a set of points in the plane. For any three points p, q, and r in S, if the circumcircle of the triangle pqr does not strictly enclose any point in S, we call pqr a Delaunay triangle. The Delaunay triangulation of S is the collection of all Delaunay triangles (including their boundaries). The Delaunay triangulation of S is the dual of the Voronoi diagram of S.

Acknowledgment This work was supported, in part, by the Research Grant Council, Hong Kong, China (HKUST 6190/02E).

References [1] B.G. Baumgart, A polyhedron representation for computer vision, National Computer conference, 589–596, Anaheim, CA, 1975, AFIPS. [2] M.S. Bazaraa, J.J. Jarvis, and H.D. Sherali, Linear Programming and Network Flows, Wiley, 1990. [3] M. deBerg, M. van Kreveld, M. Overmars, and O. Schwarzkopf, Computational Geometry – Algorithms and Applications, Springer, 2000. [4] S.-W. Cheng, T. K. Dey, and S.-H. Poon, Hierarchy of Surface Models and Irreducible

© 2005 by Chapman & Hall/CRC

Planar Straight Line Graphs

[5] [6]

[7] [8] [9] [10] [11]

[12] [13] [14] [15]

17-17

Triangulation, Computational Geometry: Theory and Applications, 27(2004), 135– 150. T.K. Dey, H. Edelsbrunner, S. Guha, and D.V. Nekhayev, Topology preserving edge contraction, Publ. Inst. Math. (Beograd) (N.S.), 66 (1999), 23–45. C.A. Duncan, M.T. Goodrich, and S.G. Kobourov, Planarity-preserving clustering and embedding for large graphs, Proc. Graph Drawing, Lecture Notes Comput. Sci., Springer-Verlag, vol. 1731, 1999, 186–196. M. Garland and P.S. Heckbert. Surface simpliﬁcation using quadric error metrics. Proc. SIGGRAPH ’97, 209–216. L. Guibas and J. Stolﬁ, Primitives for the manipulation of general subdivisions and the computation of Voronoi diagrams, ACM Transactions on Graphics, 4 (1985), 74–123. H. Hoppe, T. DeRose, T. Duchamp, J. McDonald and W. Stuetzle, Mesh optimization, Proc. SIGGRAPH ’93, 19–26. L. Kettner, Using generic programming for designing a data structure for polyhedral surfaces, Computational Geometry - Theory and Applications, 13 (1999), 65–90. E. M¨ ucke, I. Saias, and B. Zhu, Fast randomized point location without preprocessing in two and three-dimensional Delaunay triangulations, Computational Geometry: Theory and Applications, 12(1999), 63-83, 1999. D.E. Muller and F.P. Preparata, Finding the intersection of two convex polyhedra, Theoretical Computer Science, 7 (1978), 217–236. F.P. Preparata and M.I. Shamos, Computational Geometry: An Introduction, Springer-Verlag, New York, 1985. S. Sahni, Data Structures, Algorithms, and Applications in Java, McGraw Hill, NY, 2000. K. Weiler, Edge-based data structures for solid modeling in curved-surface environments. IEEE Computer Graphics and Application, 5 (1985), 21–40.

© 2005 by Chapman & Hall/CRC

18 Interval, Segment, Range, and Priority Search Trees 18.1 18.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Interval Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Construction of Interval Trees Applications

18.3

18.5 Academia Sinica

18.1

•

18-5

Examples and Its

Range Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-10 Construction of Range Trees Applications

D. T. Lee

Example and Its

Segment Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Construction of Segment Trees Applications

18.4

•

18-1 18-2

•

Examples and Its

Priority Search Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-17 Construction of Priority Search Trees and Its Applications

•

Examples

Introduction

In this chapter we introduce four basic data structures that are of fundamental importance and have many applications as we will brieﬂy cover them in later sections. They are interval trees, segment trees, range trees, and priority search trees. Consider for example the following problems. Suppose we have a set of iso-oriented rectangles in the planes. A set of rectangles are said to be iso-oriented if their edges are parallel to the coordinate axes. The subset of iso-oriented rectangles deﬁne a clique, if their common intersection is nonempty. The largest subset of rectangles whose common intersection is non-empty is called a maximum clique. The problem of ﬁnding this largest subset with a non-empty common intersection is referred to as the maximum clique problem for a rectangle intersection graph[14, 16].∗ The k-dimensional, k ≥ 1, analog of this problem is deﬁned similarly. In 1-dimensional case we will have a set of intervals on the real line, and an interval intersection graph, or simply interval graph. The maximum clique problem for interval graphs is to ﬁnd a largest subset of intervals whose common intersection is non-empty. The cardinality of the maximum clique is sometimes referred to as the density of the set of intervals. The problem of ﬁnding a subset of objects that satisfy a certain property is often referred to as searching problem. For instance, given a set of numbers S = {x1 , x2 , . . . , xn }, where

∗A

rectangle intersection graph is a graph G = (V, E), in which each vertex in V corresponds to a rectangle, and two vertices are connected by an edge in E, if the corresponding rectangles intersect.

18-1

© 2005 by Chapman & Hall/CRC

18-2

Handbook of Data Structures and Applications

xi ∈ , i = 1, 2, . . . , n, the problem of ﬁnding the subset of numbers that lie between a range [, r], i.e., F = {x ∈ S| ≤ x ≤ r}, is called a (1D) range search problem[5, 22]. To deal with this kind of geometric searching problem, we need to have appropriate data structures to support eﬃcient searching algorithms. The data structure is assumed to be static, i.e., the input set of objects is given a priori, and no insertions or deletions of the objects are allowed. If the searching problem satisﬁes decomposability property, i.e., if they are decomposable† , then there are general dynamization schemes available[21], that can be used to convert static data structures into dynamic ones, where insertions and deletions of objects are permitted. Examples of decomposable searching problems include the membership problem in which one queries if a point p in S. Let S be partitioned into two subsets S1 and S2 , and Member(p, S) returns yes, if p ∈ S, and no otherwise. It is easy to see that Member(p, S)= OR(Member(p, S1 ), Member(p, S2 )), where OR is a boolean operator.

18.2

Interval Trees

Consider a set S of intervals, S = {Ii |i = 1, 2, . . . , n}, each of which is speciﬁed by an ordered pair, Ii = [i , ri ], i , ri ∈ , i ≤ ri , i = 1, 2, . . . , n. An interval tree[8, 9], Interval Tree(S), for S is a rooted augmented binary search tree, in which each node v has a key value, v.key, two tree pointers v.left and v.right to the left and right subtrees, respectively, and an auxiliary pointer, v.aux to an augmented data structure, and is recursively deﬁned as follows: • The root node v associated with the set S, denoted Interval Tree root(S), has key value v.key equal to the median of the 2 × |S| endpoints. This key value v.key divides S into three subsets S , Sr and Sm , consisting of sets of intervals lying totally to the left of v.key, lying totally to the right of v.key and containing v.key respectively. That is, S = {Ii |ri < v.key}, Sr = {Ij |v.key < j } and Sm = {Ik |k ≤ v.key ≤ rk }. • Tree pointer v.left points to the left subtree rooted at Interval Tree root(S ), and tree pointer v.right points to the right subtree rooted at Interval Tree root(Sr ). • Auxiliary pointer v.aux points to an augmented data structure consisting of two sorted arrays, SA(Sm .left ) and SA(Sm .right ) of the set of left endpoints of the intervals in Sm and the set of right endpoints of the intervals in Sm respectively. That is, Sm .left = {i |Ii ∈ Sm } and Sm .right = {ri |Ii ∈ Sm }.

18.2.1

Construction of Interval Trees

The following is a pseudo code for the recursive construction of the interval tree of a set S of n intervals. Without loss of generality we shall assume that the endpoints of these n intervals are all distinct. See Fig. 18.1(a) for an illustration. function Interval Tree(S) /* It returns a pointer v to the root, Interval Tree root(S), of the interval tree for a set S of intervals. */

† A searching problem is said to be decomposable if and only if ∀x ∈ T , A, B ∈ 2T2 , Q(x, A ∪ B) = 1 (Q(x, A), Q(x, B)) for some eﬃciently computable associative operator on the elements of T3 , where Q is a mapping from T1 × 2T2 to T3 .[1, 3]

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-3

Input: A set S of n intervals, S = {Ii |i = 1, 2, . . . , n} and each interval Ii = [i , ri ], where i and ri are the left and right endpoints, respectively of Ii , i , ri ∈ , and i ≤ ri , i = 1, 2, . . . , n. Output: An interval tree, rooted at Interval Tree root(S). Method: 1. if S = ∅, return nil. 2. Create a node v such that v.key equals x, where x is the middle point of the set of endpoints so that there are exactly |S|/2 endpoints less than x and greater than x respectively. Let S = {Ii |ri < x}, Sr = {Ij |x < j } and Sm = {Ik |k ≤ x ≤ rk }. 3. Set v.left equal to Interval Tree(S ). 4. Set v.right equal to Interval Tree(Sr ) 5. Create a node w which is the root node of an auxiliary data structure associated with the set Sm of intervals, such that w.left and w.right point to two sorted arrays, SA(Sm .left ) and SA(Sm .right ), respectively. SA(Sm .left ) denotes an array of left endpoints of intervals in Sm in ascending order, and SA(Sm .right ) an array of right endpoints of intervals in Sm in descending order. 6. Set v.aux equal to node w. Note that this recursively built interval tree structure requires O(n) space, where n is the cardinality of S, since each interval is either in the left subtree, the right subtree or the middle augmented data structure.

18.2.2

Example and Its Applications

Fig. 18.1(b) illustrates an example of an interval tree of a set of intervals, spread out as shown in Fig. 18.1(a). The interval trees can be used to handle quickly queries of the following form. Enclosing Interval Searching Problem [11, 15] Given a set S of n intervals and a query point, q, report all those intervals containing q, i.e., ﬁnd a subset F ⊆ S such that F = {Ii |i ≤ q ≤ ri }. Overlapping Interval Searching Problem [4, 8, 9] Given a set S of n intervals and a query interval Q, report all those intervals in S overlapping Q, i.e., ﬁnd a subset F ⊆ S such that F = {Ii |Ii ∩ Q = ∅}. The following pseudo code solves the Overlapping Interval Searching Problem in O(log n) + |F | time. It is invoked by a call to Overlapping Interval Search(v, Q, F ), where v is Interval Tree root(S), and F , initially set to be ∅, will contain the set of intervals overlapping query interval Q. procedure Overlapping Interval Search(v, Q, F ) Input: A set S of n intervals, S = {Ii |i = 1, 2, . . . , n} and each interval Ii = [i , ri ], where i and ri are the left and right endpoints, respectively of Ii , i , ri ∈ , and i ≤ ri , i = 1, 2, . . . , n and a query interval Q = [, r], , r ∈ . Output: A subset F = {Ii |Ii ∩ Q = ∅}. Method:

© 2005 by Chapman & Hall/CRC

18-4

Handbook of Data Structures and Applications

I6

I3

I2

I4

I1

I7

I5

I8

(a) l3 , l4 , l5

l1 , l2

l2

r3

r2 , r1 l6 , l7 , l8

r4 , r5 , r3

l8

r7 , r8 , r6

(b) FIGURE 18.1: Interval tree for S = {I1 , I2 , . . . , I8 } and its interval models. 1. Set F = ∅ initially. 2. if v is nil return. 3. if (v.key ∈ Q) then for each interval Ii in the augmented data structure pointed to by v.aux do F = F ∪ {Ii } Overlapping Interval Search(v.left , Q, F ) Overlapping Interval Search(v.right , Q, F ) 4. if (r < v.key) then for each left endpoint i in the sorted array pointed to by v.aux.left such that i ≥ r do (a) F = F ∪ {Ii } (b) Overlapping Interval Search(v.left , Q, F ) 5. if ( > v.key) then for each right endpoint ri in the sorted array pointed to by v.aux.right such that ri ≥ do (a) F = F ∪ {Ii } (b) Overlapping Interval Search(v.right , Q, F ) It is obvious to see that an interval I in S overlaps a query interval Q = [, r] if (i) Q contains the left endpoint of I, (ii) Q contains the right endpoint of I, or (iii) Q is totally contained in I. Step 3 reports those intervals I that contain a point v.key which is also contained in Q. Step 4 reports intervals in either case (i) or (iii) and Step 5 reports intervals in either case (ii) or (iii). Note the special case of procedure Overlapping Interval Search(v, Q, F ) when we set the query interval Q = [, r] so that its left and right endpoints coincide, i.e., = r will report

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-5

all the intervals in S containing a query point, solving the Enclosing Interval Searching Problem. However, if one is interested in the problem of ﬁnding a special type of overlapping intervals, e.g., all intervals containing or contained in a given query interval[11, 15], the interval tree data structure does not necessarily yield an eﬃcient solution. Similarly, the interval tree does not provide an eﬀective method to handle queries about the set of intervals, e.g., the maximum clique, or the measure, the total length of the union of the intervals[10, 17]. We conclude with the following theorem. THEOREM 18.1 The Enclosing Interval Searching Problem and Overlapping Interval Searching Problem for a set S of n intervals can both be solved in O(log n) time (plus time for output) and in linear space.

18.3

Segment Trees

The segment tree structure, originally introduced by Bentley[5, 22], is a data structure for intervals whose endpoints are ﬁxed or known a priori. The set S = {I1 , I2 , . . . , In } of n intervals, each of which represented by Ii = [i , ri ], i , ri ∈ , i ≤ ri , is represented by a data array, Data Array(S), whose entries correspond to the endpoints, i or ri , and are sorted in non-decreasing order. This sorted array is denoted SA[1..N ], N = 2n. That is, SA[1] ≤ SA[2] ≤ . . . ≤ SA[N ], N = 2n. We will in this section use the indexes in the range [1, N ] to refer to the entries in the sorted array SA[1..N ]. For convenience we will be working in the transformed domain using indexes, and a comparison involving a point q ∈ and an index i ∈ ℵ, unless otherwise speciﬁed, is performed in the original domain in . For instance, q < i is interpreted as q <SA[i]. The segment tree structure, as will be demonstrated later, can be useful in ﬁnding the measure of a set of intervals. That is, the length of the union of a set of intervals. It can also be used to ﬁnd the maximum clique of a set of intervals. This structure can be generalized to higher dimensions.

18.3.1

Construction of Segment Trees

The segment tree, as the interval tree discussed in Section 18.2 is a rooted augment binary search tree, in which each node v is associated with a range of integers v.range = [v.B, v.E], v.B, v.E ∈ ℵ, v.B < v.E, representing a range of indexes from v.B to v.E, a key, v.key that split v.range into two subranges, each of which is associated with each child of v, two tree pointers v.left and v.right to the left and right subtrees, respectively, and an auxiliary pointer, v.aux to an augmented data structure. Given integers s and t, with 1 ≤ s < t ≤ N , the segment tree, denoted Segment Tree(s, t), is recursively described as follows. • The root node v, denoted Segment Tree root(s, t), is associated with the range [s, t], and v.B = s and v.E = t. • If s + 1 = t then we have a leaf node v with v.B = s, v.E = t and v.key = nil. • Otherwise (i.e., s + 1 < t), let m be the mid-point of s and t, or m = (v.B+v.E) . 2 Set v.key = m. • Tree pointer v.left points to the left subtree rooted at Segment Tree root(s, m),

© 2005 by Chapman & Hall/CRC

18-6

Handbook of Data Structures and Applications

and tree pointer v.right points to the right subtree rooted at Segment Tree root(m, t). • Auxiliary pointer v.aux points to an augmented data structure, associated with the range [s, t], whose content depends on the usage of the segment tree. The following is a pseudo code for the construction of a segment tree for a range [s, t] s < t, s, t ∈ ℵ, and the construction of a set of n intervals whose endpoints are indexed by an array of integers in the range [1, N ], N = 2n can be done by a call to Segment Tree(1, N ). See Fig. 18.2(b) for an illustration. function Segment Tree(s, t) /* It returns a pointer v to the root, Segment Tree root(s, t), of the segment tree for the range [s, t].*/ Input: A set N of integers, {s, s + 1, . . . , t} representing the indexes of the endpoints of a subset of intervals. Output: A segment tree, rooted at Segment Tree root(s, t). Method: 1. Let v be a node, v.B = s, v.E = t, v.left = v.right = nil, and v.aux to be determined. 2. if s + 1 = t then return. 3. Let v.key = m = (v.B+v.E) . 2 4. v.left = Segment Tree root(s, m) 5. v.right = Segment Tree root(m, t) The parameters v.B and v.E associated with node v deﬁne a range [v.B, v.E], called a standard range associated with v. The standard range associated with a leaf node is also called an elementary range. It is straightforward to see that Segment Tree(s, t) constructed in function Segment Tree(s, t) described above is balanced, and has height, denoted Segment Tree.height, equal to log2 (t − s). We now introduce the notion of canonical covering of a range [s, t], where s, t ∈ ℵ and 1 ≤ s < t ≤ N . A node v in Segment Tree(1, N ) is said to be in the canonical covering of [s, t] if its associated standard range satisﬁes this property [v.B, v.E] ⊆ [s, t], while that of its parent node does not. It is obvious that if a node v is in the canonical covering, then its sibling node, i.e., the node with the same parent node as the present one, is not, for otherwise the common parent node would have been in the canonical covering. Thus at each level there are at most two nodes that belong to the canonical covering of [s, t]. Thus, for each range [s, t] the number of nodes in its canonical covering is at most log2 (t− s) + log2 (t − s) − 2. In other words, a range [s, t] (or respectively an interval [s, t]) can be decomposed into at most log2 (t − s) + log2 (t − s) − 2 standard ranges (or respectively subintervals)[5, 22]. To identify the nodes in a segment tree T that are in the canonical covering of an interval I = [b, e], representing a range [b, e], we perform a call to Interval Insertion(v, b, e, Q), where v is Segment Tree root(S). The procedure Interval Insertion(v, b, e, Q) is deﬁned below. procedure Interval Insertion(v, b, e, Q) /* It returns a queue Q of nodes q ∈ T such that [v.B, v.E] ⊆ [b, e] and its parent node u whose [u.B, u.E] ⊆ [b, e].*/ Input: A segment tree T pointed to by its root node, v = Segment Tree root(1, N ), for a set S of intervals.

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-7

Output: A queue Q of nodes in T that are in the canonical covering of [b, e] Method: 1. Initialize an output queue Q, which supports insertion (⇒ Q) and deletion (⇐ Q) in constant time. 2. if ([v.B, v.E] ⊆ [b, e]) then append [b, e] to v, v ⇒ Q, and return. 3. if (b < v.key) then Interval Insertion(v.left , b, e, Q) 4. if (v.key < e) then Interval Insertion(v.right , b, e, Q) To append [b, e] to a node v means to insert interval I = [b, e] into the auxiliary structure associated with node v to indicate that node v whose standard range is totally contained in I is in the canonical covering of I. If the auxiliary structure v.aux associated with node v is an array, the operation append [b, e] to a node v can be implemented as v.aux[j++] = I, procedure Interval Insertion(v, b, e, Q) described above can be used to represent a set S of n intervals in a segment tree by performing the insertion operation n times, one for each interval. As each interval I can have at most O(log n) nodes in its canonical covering, and hence we perform at most O(log n) append operations for each insertion, the total amount of space required in the auxiliary data structures reﬂecting all the nodes in the canonical covering is O(n log n). Deletion of an interval represented by a range [b, e] can be done similarly, except that the append operation will be replaced by its corresponding inverse operation remove that removes the node from the list of canonical covering nodes. THEOREM 18.2 The segment tree for a set S of n intervals can be constructed in O(n log n) time, and if the auxiliary structure for each node v contains a list of intervals containing v in the canonical covering, then the space required is O(n log n).

18.3.2

Examples and Its Applications

Fig. 18.2(b) illustrates an example of a segment tree of the set of intervals, as shown in Fig. 18.2(a). The integers, if any, under each node v represent the indexes of intervals that contain the node in its canonical covering. For example, Interval I2 contains nodes labeled by standard ranges [2, 4] and [4, 7]. We now describe how segment trees can be used to solve the Enclosing Interval Searching Problem deﬁned before and the Maximum Clique Problem of a set of intervals, which is deﬁned below. Maximum Density or Maximum Clique of a set of Intervals [12, 16, 23] Given a set S of n intervals, ﬁnd a maximum subset C ⊆ Ssuch that the common intersection of intervals in C is non-empty. That is, Ii ∈C⊆S Ii = ∅ and |C| is maximized. |C| is called the density of the set. The following pseudo code solves the Enclosing Interval Searching Problem in O(log n)+|F | time, where F is the output set. It is invoked by a call Point in Interval Search(v, q, F ), where v is Segment Tree root(S), and F initially set to be ∅, will contain the set of intervals containing a query point q. procedure Point in Interval Search(v, q, F ) /* It returns in F the list of intervals stored in the segment tree pointed to by v and containing query point q */

© 2005 by Chapman & Hall/CRC

18-8

Handbook of Data Structures and Applications

I4

I1 I2 I3 1

2

3

4

5

6

7

(a) [1,7]

[1,4]

[4,7]

1 [1,2]

2 [2,4]

2,3 [2,3]

[5,7]

[4,5]

4

3 [5,6]

[3,4]

[6,7]

3 (b) FIGURE 18.2: Segment tree of S = {I1 , I2 , I3 , I4 } and its interval models. Input: A segment tree representing a set S of n intervals, S = {Ii |i = 1, 2, . . . , n} and a query point q ∈ . The auxiliary structure v.aux associated with each node v is a list of intervals I ∈ S that contain v in their canonical covering. Output: A subset F = {Ii |i ≤ q ≤ ri }. Method: 1. if v is nil or (q < v.B or q > v.E) then return. 2. if (v.B ≤ q ≤ v.E) then for each interval Ii in the auxiliary data structure pointed to by v.aux do F = F ∪ {Ii }. 3. if (q ≤ v.key) then Point in Interval Search(v.left, q, F ) 4. else (/* i.e., q > v.key */) Point in Interval Search(v.right, q, F ) We now address the problem of ﬁnding the maximum clique of a set S of intervals, S = {I1 , I2 , . . . , In }, where each interval Ii = [i , ri ], and i ≤ ri , i , ri ∈ , i = 1, 2, . . . , n. There are other approaches, such as plane-sweep [12, 16, 22, 23] that solve this problem within the same complexity. For this problem we introduce an auxiliary data structure to be stored at each node v. v.aux will contain two pieces of information: one is the number of intervals containing v

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-9

in the canonical covering, denoted v., and the other is the clique size, denoted v.clq. The clique size of a node v is the size of the maximum clique whose common intersection is contained in the standard range associated with v. It is deﬁned to be equal to the larger of the two numbers: v.left . + v.left .clq and v.right . + v.right .clq. For a leaf node v, v.clq = 0. The size of the maximum clique for the set of intervals will then be stored at the root node Segment Tree root(S) and is equal to the sum of v. and v.clq, where v = Segment Tree root(S). It is obvious that the space needed for this segment tree is linear. As this data structure supports insertion of intervals incrementally, it can be used to answer the maximum clique of the current set of intervals as the intervals are inserted into (or deleted from) the segment tree T . The following pseudo code ﬁnds the size of the maximum clique of a set of intervals. function Maximum Clique(S) /* It returns the size of the maximum clique of a set S of intervals. */ Input: A set S of n intervals and the segment tree T rooted at Segment Tree root(S). Output: An integer, which is the size of the maximum clique of S. Method: Assume that S = {I1 , I2 , . . . , In } and that the endpoints of the intervals are represented by the indexes of a sorted array containing these endpoints. 1. Initialize v.clq = v. = 0 for all nodes v in T . 2. for each interval Ii = [i , ri ] ∈ S, i = 1, 2, . . . , n do /* Insert Ii into the tree and update v. and v.clq for all visited nodes and those nodes in the canonical covering of Ii */ 3. begin 4. s = Find split-node(v, i , ri ), where v is Segment Tree root(S). (See below) Let the root-to-split-node(s)-path be denoted P . 5. /* Find all the canonical covering nodes in the left subtree of s */ Traverse along the left subtree from s following the left tree pointer, and ﬁnd a leftward path, s1 , s2 , . . . till node sL such that s1 = s.left , sk = sk−1 .left , for k = 2, . . . , L. Note that the standard ranges of all these nodes overlap Ii , but the standard range associated with sL .left is totally disjoint from Ii . sL is s1 only if the standard range of s1 is totally contained in Ii , i.e., s1 is in the canonical covering of Ii . Other than this, the right child of each node on this leftward path belongs to the canonical covering of Ii . 6. Increment u. for all nodes u that belong to the canonical covering of Ii . 7. Update sj .clq according to the deﬁnition of clique size for all nodes on the leftward path in reverse order, i.e., starting from node sL to s1 . 8. /* Find all the canonical covering nodes in the right subtree of s */ Similarly we traverse along the right subtree from s along the right tree pointer, and ﬁnd a rightward path. Perform Steps 5 to 7. 9. Update s.clq for the split node s after the clique sizes of both left and right child of node s have been updated. 10. Update u.clq for all the nodes u on the root-to-split-node-path P in reverse order, starting from node s to the root. 11. end 12. return (v. + v.clq), where v = Segment Tree root(S).

© 2005 by Chapman & Hall/CRC

18-10

Handbook of Data Structures and Applications

function Find split-node(v, b, e) /* Given a segment tree T rooted at v and an interval I = [b, e] ⊆ [v.B, v.E], this procedure returns the split-node s such that either [s.B, s.E] = [b, e] or [s .B, s .E] ∩ [b, e] = ∅ and [sr .B, sr .E] ∩ [b, e] = ∅, where s and sr are the left child and right child of s respectively. */ 1. 2. 3. 4.

if if if if

[v.B, v.E] = [b, e] then return v. (b < v.key) and (e > v.key) then return v. (e ≤ v.key) then return Find split-node(v.left , b, e) (b ≥ v.key) then return Find split-node(v.right , b, e)

Note that in procedure Maximum Clique(S) it takes O(log n) time to process each interval. We conclude with the following theorem. THEOREM 18.3 Given a set S = {I1 , I2 , . . . , In } of n intervals, the maximum clique of Si = {I1 , I2 , . . . , Ii } can be found in O(i log i) time and linear space, for each i = 1, 2, . . . , n, by using a segment tree.

We note that the above procedure can be adapted to ﬁnd the maximum clique of a set of hyperrectangles in k-dimensions for k > 2 in time O(nk ).[16]

18.4

Range Trees

Consider a set S of points in k-dimensional space k . A range tree for this set S of points is a data structure that supports general range queries of the form [x1 , x1r ]×[x2 , x2r ]×. . .×[xk , xkr ], where each range [xi , xir ], xi , xir ∈ , xi ≤ xir for all i = 1, 2, . . . , k, denotes an interval in . The cartesian product of these k ranges is referred to as a kD range. In 2-dimensional space, a 2D range is simply an axes-parallel rectangle in 2 . The range search problem is to ﬁnd all the points in S that satisfy any range query. In 1-dimension, the range search problem can be easily solved in logarithmic time using a sorted array or a balanced binary search tree. The 1D range is simply an interval [x , xr ]. We ﬁrst do a binary search using x as searched key to ﬁnd the ﬁrst node v whose key is no less than x . Once v is located, the rest is simply to retrieve the nodes, one at a time, until the node u whose key is greater than xr . We shall in this section describe an augmented binary search tree which is easily generalized to higher dimensions.

18.4.1

Construction of Range Trees

A range tree is primarily a binary search tree augmented with an auxiliary data structure. The root node v, denoted Range Tree root(S), of a kD-range tree[5, 18, 22, 24] for a set S of points in k-dimensional space k , i.e., S = {pi = (x1i , x2i , . . . , xki ), i = 1, 2, . . . , n}, where pi .xj = xji ∈ is the jth-coordinate value of point pi , for j = 1, 2, . . . , k, is associated with the entire set S. The key stored in v.key is to partition S into two approximately equal subsets S and Sr , such that all the points in S and in Sr lie to the left and to the right, respectively of the hyperplane H k : xk = v.key. That is, we will store the median of the kth coordinate values of all the points in S in v.key of the root node v, i.e., v.key = pj .xk for some point pj such that S contains points p , p .xk ≤ v.key, and Sr contains points pr , pr .xk > v.key. Each node v in the kD-range tree, as before, has two tree pointers, v.left and v.right , to the roots of its left and right subtrees respectively. The node pointed to by

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-11

v.left will be associated with the set S and the node pointed to by v.right will be associated with the set Sr . The auxiliary pointer v.aux will point to an augmented data structure, in our case a (k − 1)D-range tree. A 1D-range tree is a sorted array of all the points pi ∈ S such that the entries are drawn from the set {x1i |i = 1, 2, . . . , n} sorted in nondecreasing order. This 1D-range tree supports the 1D range search in logarithmic time. The following is a pseudo code for a kD-range tree for a set S of n points in k-dimensional space. See Fig. 18.3(a) and (b) for an illustration. Fig. 18.4(c) is a schematic representation of a kD-range tree. function kD Range Tree(k, S) /* It returns a pointer v to the root, kD Range Tree root(k, S), of the kD-range tree for a set S ⊆ k of points, k ≥ 1. */ Input: A set S of n points in k , S = {pi = (x1i , x2i , . . . , xki ), i = 1, 2, . . . , n}, where xji ∈ is the jth-coordinate value of point pi , for j = 1, 2, . . . , k. Output: A kD-range tree, rooted at kD Range Tree root(k, S). Method: 1. if S = ∅, return nil. 2. if (k = 1) create a sorted array SA(S) pointed to by a node v containing the set of the 1st coordinate values of all the points in S, i.e., SA(1, S) has {pi .x1 |i = 1, 2, . . . , n} in nondecreasing order. return (v). 3. Create a node v such that v.key equals the median of the set {pi .xk | kth coordinate value of pi ∈ S, i = 1, 2, . . . , n}. Let S and Sr denote the subset of points whose kth coordinate values are not greater than and are greater than v.key respectively. That is, S = {pi ∈ S}|pi .xk ≤ v.key} and Sr = {pj ∈ S}|pj .xk > v.key}. 4. v.left = kD Range Tree(k, S ) 5. v.right = kD Range Tree(k, Sr ) 6. v.aux = kD Range Tree(k − 1, S) As this is a recursive algorithm with two parameters, k and |S|, that determine the recursion depth, it is not immediately obvious how much time and how much space are needed to construct a kD-range tree for a set of n points in k-dimensional space. Let T (n, k) denote the time taken and S(n, k) denote the space required to build a kDrange tree of a set of n points in k . The following are recurrence relations for T (n, k) and S(n, k) respectively. ⎧ if n = 1 ⎨ O(1) O(n log n) if k = 2 T (n, k) = ⎩ 2T (n/2, k) + T (n, k − 1) + O(n) otherwise ⎧ if n = 1 ⎨ O(1) O(n) if k = 1 S(n, k) = ⎩ 2S(n/2, k) + S(n, k − 1) + O(1) otherwise Note that in 1-dimension, we need to have the points sorted and stored in a sorted array, and thus T (n, 1) = O(n log n) and S(n, 1) = O(n). The solutions of T (n, k) and S(n, k) to the above recurrence relations are T (n, k) = O(n logk−1 n + n log n) for k ≥ 1 and S(n, k) = O(n logk−1 n) for k ≥ 1. For a general multidimensional divide-and-conquer

© 2005 by Chapman & Hall/CRC

18-12

Handbook of Data Structures and Applications

scheme, and solutions to the recurrence relation, please refer to Bentley[2] and Monier[20] respectively. We conclude that The kD-range tree for a set of n points in k-dimensional space can be constructed in O(n logk−1 n + n log n) time and O(n logk−1 n) space for k ≥ 1.

THEOREM 18.4

18.4.2

Examples and Its Applications

Fig. 18.3(b) illustrates an example of a range tree for a set of points in 2-dimensions shown in Fig. 18.3(a). This list of integers under each node represents the indexes of points in ascending x-coordinates. Fig. 18.4 illustrates a general schematic representation of a kDrange tree, which is a layered structure[5, 22].

p1 p5 p3 p4 p2 p6

(a) [y6 ,y1 ]

4,2,1,3,6,5 [y6 ,y4 ]

(y4 ,y1 ]

1,3,5

4,2,6 [y6 ,y2 ]

(y2 ,y4 ]

2,6

4

(y4 ,y5 ]

(y5 ,y1 ]

3,5

1

[y6 ,y6 ]

(y6 ,y2 ]

(y4 ,y3 ]

(y3 ,y5 ]

2

6

3

5

(b) FIGURE 18.3: 2D-range tree of S = {p1 , p2 , . . . , p6 }, where pi = (xi , yi ).

We now discuss how we make use of a range tree to solve the range search problem. We shall use 2D-range tree as an example for illustration purposes. It is rather obvious

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-13

... v v.left

v.right

2D-range tree of S associated with v

(k-1)D-range tree of S associated with v kD-range tree of Sl

kD-range tree of Sr

(c) FIGURE 18.4: A schematic representation of a (layered) kD-range tree, where S is the set associated with node v. to generalize it to higher dimensions. Recall we have a set S of n points in the plane 2 and 2D range query Q = [x , xr ] × [y , yr ]. Let us assume that a 2D-range tree rooted at 2D Range Tree root(S) is available. Recall also that associated with each node v in the range tree there is a standard range for the set Sv of points represented in the subtree rooted at node v, in this case [v.B, v.E] where v.B = min{pi .y} and v.E = max{pi .y} for all pi ∈ Sv . v.key will split the standard range into two standard subranges [v.B, v.key] and [v.key, v.E] each associated with the root nodes v.left and v.right of the left and right subtrees of v respectively. The following pseudo code reports in F the set of points in S that lie in the range Q = [x , xr ] × [y , yr ]. It is invoked by 2D Range Search(v, x , xr , y , yr , F ), where v is the root, 2D Range Tree root(S), and F , initially empty will return all the points in S that lie in the range Q = [x , xr ] × [y , yr ]. procedure 2D Range Search(v, x , xr , y , yr , F ) /* It returns F containing all the points in the range tree rooted at node v that lie in [x , xr ] × [y , yr ]. */ Input: A set S of n points in 2 , S = {pi |i = 1, 2, . . . , n} and each point pi = (pi .x, pi .y), where pi .x and pi .y are the x- and y-coordinates of pi , pi .x, pi .y ∈ , i = 1, 2, . . . , n. Output: A set F of points in S that lie in [x , xr ] × [y , yr ]. Method: 1. Start from the root node v to ﬁnd the split-node s, s = Find split-node(v, y , yr ), such that s.key lies in [y , yr ].

© 2005 by Chapman & Hall/CRC

18-14

Handbook of Data Structures and Applications 2. if s is a leaf, then 1D Range Search(s.aux, x , xr , F ) that checks in the sorted array pointed to by s.aux, which contains just a point p, to see if its x-coordinate p.x lies in the x-range [x , xr ] 3. v = s.left . 4. while v is not a leaf do if (y ≤ v.key) then 1D Range Search(v.right .aux, x , xr , F ) v = v.left else v = v.right 5. (/* v is a leaf, and check node v.aux directly */) 1D Range Search(v.aux, x , xr , F ) 6. v = s.right 7. while v is not a leaf do if (yr > v.key) then 1D Range Search(v.left .aux, x , xr , F ) v = v.right else v = v.left 8. (/* v is a leaf, and check node v.aux directly */) 1D Range Search(v.aux, x , xr , F )

procedure 1D Range Search(v, x , xr , F ) is very straightforward. v is a pointer to a sorted array SA. We ﬁrst do a binary search in SA looking for the ﬁrst element no less than x and then start to report in F those elements no greater than xr . It is obvious that procedure 2D Range Search ﬁnds all the points in Q in O(log2 n) time. Note that there are O(log n) nodes for which we need to invoke 1D Range Search in their auxiliary sorted arrays. These nodes v are in the canonical covering‡ of the y-range [y , yr ], since its associated standard range [v.B, v.E] is totally contained in [y , yr ], and the 2D-range search problem is now reduced to the 1D-range search problem. This is not diﬃcult to see that the 2D-range search problem can be answered in time O(log2 n) plus time for output, as there are O(log n) nodes in the canonical covering of a given y-range and for each node in the canonical covering we spend O(log n) time for dealing with the 1D-range search problem. However, with a modiﬁcation to the auxiliary data structure, one can achieve an optimal query time of O(log n), instead of O(log2 n)[6, 7, 24]. This is based on the observation that in each of the 1D-range search subproblem associated with each node in the canonical covering, we perform the same query, reporting points whose x-coordinates lie in the x-range [x , xr ]. More speciﬁcally we are searching for the smallest element no less than x . The modiﬁcation is performed on the sorted array associated with each of the node in the 2D Range Tree(S). Consider the root node v. As it is associated with the entire set of points, v.aux points to the sorted array containing the x-coordinates of all the points in S. Let this sorted array be denoted SA(v) and the entries, SA(v)i , i = 1, 2, . . . , |S|, are sorted in nondecreasing order of the x-coordinate values. In addition to the x-coordinate value, each entry also contains

‡ See

the deﬁnition of the canonical covering deﬁned in Section 18.3.1.

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-15

the index of the corresponding point. That is, SA(v)i .key and SA(v)i .index contain the x-coordinate of pj respectively, where SA(v)i .index = j and SA(v)i .key = pj .x. We shall augment each entry SA(v)i with two pointers, SA(v)i .left and SA(v)i .right . They are deﬁned as follows. Let v and vr denote the roots of the left and right subtrees of v, i.e., v.left = v and v.right = vr . SA(v)i .left points to the entry SA(v )j such that entry SA(v )j .key is the smallest among all key values SA(v )j .key ≥ SA(v)i .key. Similarly, SA(v)i .right points to the entry SA(vr )k such that entry SA(vr )k .key is the smallest among all key values SA(vr )k .key ≥ SA(v)i .key. These two augmented pointers, SA(v)i .left and SA(v)i .right , possess the following property: If SA(v)i .key is the smallest key such that SA(v)i .key ≥ x , then SA(v )j .key is also the smallest key such that SA(v )j .key ≥ x . Similarly SA(vr )k .key is the smallest key such that SA(vr )k .key ≥ x . Thus if we have performed a binary search in the auxiliary sorted array SA(v) associated with node v locating the entry SA(v)i whose key SA(v)i .key is the smallest key such that SA(v)i .key ≥ x , then following the left (respectively right) pointer SA(v)i .left (respectively SA(v)i .right ) to SA(v )j (respectively SA(vr )k ), the entry SA(v )j .key (respectively SA(vr )k .key) is also the smallest key such that SA(v )j .key ≥ x (respectively SA(vr )k .key ≥ x ). Thus there is no need to perform an additional binary search in the auxiliary sorted array SA(v.left ) (respectively SA(v.right )). With this additional modiﬁcation, we obtain an augmented 2D-range tree and the following theorem. THEOREM 18.5 The 2D-range search problem for a set of n points in the 2-dimensional space can be solved in time O(log n) plus time for output, using an augmented 2D-range tree that requires O(n log n) space.

The following procedure is generalized from procedure 2D Range Search(v, x , xr , y , yr , F ) discussed in Section 18.4.2 taken into account the augmented auxiliary data structure. It is invoked by kD Range Search(k, v, Q, F ), where v is the root kD Range Tree root(S) of the range tree, Q is the k-range, [x1 , x1r ] × [x2 , x2r ] × . . . × [xk , xkr ], represented by a two dimensional array, such that Qi . = xi and Qi .r = xir , and F , initially empty, will contain all the points that lie in Q. procedure kD Range Search(k, v, Q, F ). /* It returns F containing all the points in the range tree rooted at node v that lie in k-range, [x1 , x1r ] × [x2 , x2r ] × . . . × [xk , xkr ], where each range [xi , xir ], xi = Qi ., xir = Qi .r ∈ , xi ≤ xir for all i = 1, 2, . . . , k, denotes an interval in . */ Input: A set S of n points in k , S = {pi |i = 1, 2, . . . , n} and each point pi = (pi .x1 , pi .x2 , . . . , pi .xk ), where pi .xj ∈ , are the jth-coordinates of pi , j = 1, 2, . . . , k. Output: A set F of points in S that lie in [x1 , x1r ] × [x2 , x2r ] × . . . × [xk , xkr ]. Method: 1. if (k > 2) then • Start from the root node v to ﬁnd the split-node s, s = Find splitnode(v, Qk , Qkr ), such that s.key lies in [Qk , Qkr ]. • if s is a leaf, then check in the sorted array pointed to by s.aux, which contains just a point p. p ⇒ F if its coordinate values lie in Q. return • v = s.left .

© 2005 by Chapman & Hall/CRC

18-16

Handbook of Data Structures and Applications • while v is not a leaf do if (Qk ≤ v.key) then kD Range Search(k − 1, v.right .aux, Q, F ). v = v.left else v = v.right • (/* v is a leaf, and check node v.aux directly */) Check in the sorted array pointed to by v.aux, which contains just a point p. p ⇒ F if its coordinate values lie in Q. return • v = s.right • while v is not a leaf do if (Qkr > v.key) then kD Range Search(k − 1, v.left .aux, Q, F ). v = v.right else v = v.left • (/* v is a leaf, and check node v.aux directly */) Check in the sorted array pointed to by v.aux, which contains just a point p. p ⇒ F if its coordinate values lie in Q. return 2. else /* k ≤ 2*/ 3. if k = 2 then • Do binary search in sorted array SA(v) associated with node v, using Q1 . (x1 ) as key to ﬁnd entry ov such that SA(v)ov ’s key, SA(v)ov .key is the smallest such that SA(v)ov .key ≥ Q1 ., • Find the split-node s, s = Find split-node(v, x2 , x2r ), such that s.key lies in [x2 , x2r ]. Record the root-to-split-node path from v to s, following left or right tree pointers. • Starting from entry ov (SA(v)i ) follow pointers SA(v)ov .left or SA(v)ov .right according to the v-to-s path to point to entry SA(s)os associated with SA(s). • if s is a leaf, then check in the sorted array pointed to by s.aux, which contains just a point p. p ⇒ F if its coordinate values lie in Q. return • v = s.left , ov = SA(s)os .left . • while v is not a leaf do if (Q2 . ≤ v.key) then = SA(v)ov .right while (SA(v.right ) .key ≤ Q1 .r) do point pm ⇒ F , where m = SA(v.right ) .index ++ v = v.left , ov = SA(v)ov .left else v = v.right , ov = SA(v)ov .right • (/* v is a leaf, and check node v.aux directly */) Check in the sorted array pointed to by v.aux, which contains just a point p. p ⇒ F if its coordinate values lie in Q. • v = s.right , ov = SA(s)os .right . • while v is not a leaf do if (Q2 .r > v.key) then = SA(v)ov .left

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-17

while (SA(v.left ) .key ≤ Q1 .r) do point pm ⇒ F , where m = SA(v.left ) .index ++ else v = v.left , ov = SA(v)ov .left • (/* v is a leaf, and check node v.aux directly */) Check in the sorted array pointed to by v.aux, which contains just a point p. p ⇒ F if its coordinate values lie in Q. The following recurrence relation for the query time Q(n, k) of the kD-range search problem, can be easily obtained: ⎧ if n = 1 ⎨ O(1) O(log n) + F if k = 2 Q(n, k) = ⎩ Σv∈CC Q(nv , k − 1) + O(log n) otherwise where F denotes the output size, and nv denotes the size of the subtree rooted at node v that belongs to the canonical covering CC of the query. The solution is Q(n, k) = O(logk−1 n) + F [5, 22]. We conclude with the following theorem. THEOREM 18.6 The kD-range search problem for a set of n points in the k-dimensional space can be solved in time O(logk−1 n) plus time for output, using an augmented kD-range tree that requires O(n logk−1 n) space for k ≥ 1.

18.5

Priority Search Trees

The priority search tree was originally introduced by McCreight[19]. It is a hybrid of two data structures, binary search tree and a priority queue.[13] A priority queue is a queue and supports the following operations: insertion of an item and deletion of the minimum (highest priority) item, so called delete min operation. Normally the delete min operation takes constant time, while updating the queue so that the minimum element is readily accessible takes logarithmic time. However, searching for an element in a priority queue will normally take linear time. To support eﬃcient searching, the priority queue is modiﬁed to be a priority search tree. We will give a formal deﬁnition and its construction later. As the priority search tree represents a set S of elements, each of which has two pieces of information, one being a key from a totally ordered set, say the set of real numbers, and the other being a notion of priority, also from a totally ordered set, for each element, we can model this set S as a set of points in 2-dimensional space. The x- and y-coordinates of a point p represent the key and the priority respectively. For instance, consider a set of jobs S = {J1 , J2 , . . . , Jn }, each of which has a release time ri ∈ and a priority pi ∈ , i = 1, 2, . . . , n. Then each job Ji can be represented as a point q such that q.x = ri , q.y = pi . The priority search tree can be used to support queries of the form, ﬁnd, among a set S of n points, the point p with minimum p.y such that its x-coordinate lies in a given range [, r], i.e., ≤ p.x ≤ r. As can be shown later, this query can be answered in O(log n) time.

18.5.1

Construction of Priority Search Trees

As before, the root node, Priority Search Tree root(S), represents the entire set S of points. Each node v in the tree will have a key v.key, an auxiliary data v.aux containing the index

© 2005 by Chapman & Hall/CRC

18-18

Handbook of Data Structures and Applications

of the point and its priority, and two pointers v.left and v.right to its left and right subtrees respectively such that all the key values stored in the left subtree are less than v.key, and all the key values stored in the right subtree are greater than v.key. The following is a pseudo code for the recursive construction of the priority search tree of a set S of n points in 2 . See Fig. 18.5(a) for an illustration. function Priority Search Tree(S) /* It returns a pointer v to the root, Priority Search Tree root(S), of the priority search tree for a set S of points. */ Input: A set S of n points in 2 , S = {pi |i = 1, 2, . . . , n} and each point pi = (pi .x, pi .y), where pi .x and pi .y are the x- and y-coordinates of pi , pi .x, pi .y ∈ , i = 1, 2, . . . , n. Output: A priority search tree, rooted at Priority Search Tree root(S). Method: 1. if S = ∅, return nil. 2. Create a node v such that v.key equals the median of the set {p.x|p ∈ S}, and v.aux contains the index i of the point pi whose y-coordinate is the minimum among all the y-coordinates of the set S of points i.e., pi .y = min{p.y|p ∈ S}. 3. Let S = {p ∈ S \ {pv.aux }|p.x ≤ v.key} and Sr = {p ∈ S \ {pv.aux }|p.x > v.key} denote the set of points whose x-coordinates are less than or equal to v.key and greater than v.key respectively. 4. v.left = Priority Search Tree root(S ). 5. v.right = Priority Search Tree root(Sr ). 6. return v. Thus, Priority Search Tree root(S) is a minimum heap data structure with respect to the y-coordinates, i.e., the point with minimum y-coordinate can be accessed in constant time, and is a balanced binary search tree for the x-coordinates. Implicitly the root node v is associated with an x-range [x , xr ] representing the span of the x-coordinate values of all the points in the whole set S. The root of the left subtree pointed to by v.left is associated with the x-range [x , v.key] representing the span of the x-coordinate values of all the points in the set S and the root of the right subtree pointed to by v.right is associated with the xrange [v.key, xr ] representing the span of the x-coordinate values of all the points in the set Sr . It is obvious that this algorithm takes O(n log n) time and linear space. We summarize this in the following. THEOREM 18.7 The priority search tree for a set S of n points in 2 can be constructed in O(n log n) time and linear space.

18.5.2

Examples and Its Applications

Fig. 18.5 illustrates an example of a priority search tree of the set of points. Note that the root node contains p6 since its y-coordinate value is the minimum. We now illustrate a usage of the priority search tree by an example. Consider a socalled grounded 2D range search problem for a set of n points in the plane. As deﬁned in Section 18.4.2, a 2D range search problem is to ﬁnd all the points p ∈ S such that p.x lies in an x-range [x , xr ], x ≤ xr and p.y lies in a y-range [y , yr ]. When the y-range is of the

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-19

p1 p5 p2

p3

p4 p7 p6

(a) p6

p4 p2

p7 p1

p3

p5

(b) FIGURE 18.5: Priority search tree of S = {p1 , p2 , . . . , p7 }. form [−∞, yr ] then the 2D range is referred to as grounded 2D range or sometimes as 1.5D range, and the 2D range search problem as grounded 2D range search or 1.5D range search problem. Grounded 2D Range Search Problem Given a set S of n points in the plane 2 , with preprocessing allowed, ﬁnd the subset F of points whose x- and ycoordinates satisfy a grounded 2D range query of the form [x , xr ]×[−∞, yr ], x , xr , yr ∈ , x ≤ xr . The following pseudo code solves this problem optimally. We assume that a priority search tree for S has been constructed via procedure Priority Search Tree(S). The answer will be obtained in F via an invocation to Priority Search Tree Range Search(v, x , xr , yr , F ), where v is Priority Search Tree root(S). procedure Priority Search Tree Range Search(v, x , xr , yr , F ) /* v points to the root of the tree, F is a queue and set to nil initially. */ Input: A set S of n points, {p1 , p2 , . . . , pn }, in 2 , stored in a priority search tree, Priority Search Tree(S) pointed to by Priority Search Tree root(S) and a 2D grounded range [x , xr ] × [−∞, yr ], x , xr , yr ∈ , x ≤ xr . Output: A subset F ⊆ S of points that lie in the 2D grounded range, i.e., F = {p ∈ S|x ≤ p.x ≤ xr and p.y ≤ yr }. Method:

© 2005 by Chapman & Hall/CRC

18-20

Handbook of Data Structures and Applications 1. Start from the root v ﬁnding the ﬁrst split-node vsplit such that vsplit .x lies in the x-range [x , xr ]. 2. For each node u on the path from node v to node vsplit if the point pu.aux lies in range [x , xr ] × [∞, yr ] then report it by (pu.aux ⇒ F ). 3. For each node u on the path of x in the left subtree of vsplit do if the path goes left at u then Priority Search Tree 1dRange Search(u.right, yr , F ). 4. For each node u on the path of xr in the right subtree of vsplit do if the path goes right at u then Priority Search Tree 1dRange Search(u.left, yr , F ).

procedure Priority Search Tree 1dRange Search(v, yr , F ) /* Report in F all the points pi , whose y-coordinate values are no greater than yr , where i = v.aux. */ 1. if v is nil return. 2. if pv.aux .y ≤ yr then report it by (pv.aux ⇒ F ). 3. Priority Search Tree 1dRange Search(v.left , yr , F ) 4. Priority Search Tree 1dRange Search(v.right , yr , F ) procedure Priority Search Tree 1dRange Search(v, yr , F ) basically retrieves all the points stored in the priority search tree rooted at v such that their y-coordinates are all less than and equal to yr . The search terminates at the node u whose associated point has a ycoordinate greater than yr , implying all the nodes in the subtree rooted at u satisfy this property. The amount of time required is proportional to the output size. Thus we conclude that THEOREM 18.8 The Grounded 2D Range Search Problem for a set S of n points in the plane 2 can be solved in time O(log n) plus time for output, with a priority search tree structure for S that requires O(n log n) time and O(n) space.

Note that the space requirement for the priority search tree in linear, compared to that of a 2D-range tree, which requires O(n log n) space. That is, the Grounded 2D Range Search Problem for a set S of n points can be solved optimally using priority search tree structure.

Acknowledgment This work was supported in part by the National Science Council under the Grants NSC91-2219-E-001-001 and NSC91-2219-E-001-002.

References [1] J. L. Bentley, “Decomposable searching problems,” Inform. Process. Lett., vol. 8, 1979, pp. 244- 251. [2] J. L. Bentley, “Multidimensional divide-and-conquer,” Commun. ACM, (23,4), 1980, pp. 214-229. [3] J. L. Bentley and J. B. Saxe, “Decomposable searching problems I: Static-to-dynamic transformation,” J. Algorithms, vol. 1, 1980, pp. 301-358. [4] J.-D. Boissonnat and F. P. Preparata, “Robust plane sweep for intersecting segments,” SIAM J. Comput. (29,5), 2000, pp. 1401-1421.

© 2005 by Chapman & Hall/CRC

Interval, Segment, Range, and Priority Search Trees

18-21

[5] M. de Berg, M. van Kreveld, M. Overmars and O. Schwarzkopf, Computational Geometry: Algorithms and Applications, Springer-Verlag, Berlin, 1997. [6] B. Chazelle and L. J. Guibas, “Fractional cascading: I. A data structuring technique,” Algorithmica, (1,3), 1986, pp. 133–162 [7] B. Chazelle and L. J. Guibas, “Fractional cascading: II. Applications,” Algorithmica, (1,3), 1986, pp. 163-191. [8] H. Edelsbrunner, “A new approach to rectangle intersections, Part I,” Int’l J. Comput. Math., vol. 13, 1983, pp. 209-219. [9] H. Edelsbrunner, “A new approach to rectangle intersections, Part II,” Int’l J. Comput. Math., vol. 13, 1983, pp. 221-229. [10] M. L. Fredman and B. Weide, “On the complexity of computing the measure of [ai , bi ],” Commun. ACM, vol. 21, 1978, pp. 540-544. [11] P. Gupta, R. Janardan, M. Smid and B. Dasgupta, “The rectangle enclosure and point-dominance problems revisited,” Int’l J. Comput. Geom. Appl., vol. 7, 1997, pp. 437-455. [12] U. Gupta, D. T. Lee and J. Y-T. Leung, “An optimal solution for the channelassignment problem,” IEEE Trans. Comput., Nov. 1979, pp. 807-810. [13] E. Horowitz, S. Sahni and S. Anderson-Freed, Fundamentals of Data Structures in C, Computer Science Press, 1993. [14] H. Imai and Ta. Asano, “Finding the connected components and a maximum clique of an intersection graph of rectangles in the plane,” J. Algorithms, vol. 4, 1983, pp. 310-323. [15] D. T. Lee and F.P. Preparata, “An improved algorithm for the rectangle enclosure problem,” J. Algorithms, 3,3 Sept. 1982, pp. 218-224. [16] D. T. Lee, “Maximum clique problem of rectangle graphs,” in Advances in Computing Research, Vol. 1, ed. F.P. Preparata, JAI Press Inc., 1983, 91-107. [17] J. van Leeuwen and D. Wood, “The measure problem for rectangular ranges in dspace,” J. Algorithms, vol. 2, 1981, pp. 282-300. [18] G. S. Lueker and D. E. Willard, “A data structure for dynamic range queries,” Inform. Process. Lett., (15,5), 1982, pp. 209-213. [19] E. M. McCreight, “Priority search trees,” SIAM J. Comput., (14,1), 1985, pp. 257-276. [20] L. Monier, “Combinatorial solutions of multidimensional divide-and-conquer recurrences,” J. Algorithms, vol. 1, 1980, pp. 60-74. [21] M. H. Overmars and J. van Leeuwen, “Two general methods for dynamizing decomposable searching problems,” Computing, vol. 26, 1981, pp. 155-166. [22] F. P. Preparata and M. I. Shamos, Computational Geometry: An Introduction, 3rd edition, Springer-Verlag, 1990. [23] M. Sarrafzadeh and D. T. Lee, “Restricted track assignment with applications,” Int’l J. Comput. Geom. Appl., vol. 4, 1994, pp. 53-68. [24] D. E. Willard, “New data structures for orthogonal range queries,” SIAM J. Comput., vol. 14, 1985, pp. 232-253.

© 2005 by Chapman & Hall/CRC

19 Quadtrees and Octrees 19.1 19.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quadtrees for Point Data . . . . . . . . . . . . . . . . . . . . . . . . .

19-1 19-2

Point Quadtrees • Region Quadtrees • Compressed Quadtrees and Octrees • Cell Orderings and Space-Filling Curves • Construction of Compressed Quadtrees • Basic Operations • Practical Considerations

19.3

Spatial Queries with Region Quadtrees . . . . . . . . . 19-14 Range Query Neighbors

19.4

•

Spherical Region Queries

•

k -Nearest

Image Processing Applications . . . . . . . . . . . . . . . . . . . 19-16 Construction of Image Quadtrees • Union and Intersection of Images • Rotation and Scaling • Connected Component Labeling

Srinivas Aluru Iowa State University

19.1

19.5

Scientiﬁc Computing Applications . . . . . . . . . . . . . . . 19-20 The N-body Problem

Introduction

Quadtrees are hierarchical spatial tree data structures that are based on the principle of recursive decomposition of space. The term quadtree originated from representation of two dimensional data by recursive decomposition of space using separators parallel to the coordinate axis. The resulting split of a region into four regions corresponding to southwest, northwest, southeast and northeast quadrants is represented as four children of the node corresponding to the region, hence the term“quad”tree. In a three dimensional analogue, a region is split into eight regions using planes parallel to the coordinate planes. As each internal node can have eight children corresponding to the 8-way split of the region associated with it, the term octree is used to describe the resulting tree structure. Analogous data structures for representing spatial data in higher than three dimensions are called hyperoctrees. It is also common practice to use the term quadtrees in a generic way irrespective of the dimensionality of the spatial data. This is especially useful when describing algorithms that are applicable regardless of the speciﬁc dimensionality of the underlying data. Several related spatial data structures are described under the common rubric of quadtrees. Common to these data structures is the representation of spatial data at various levels of granularity using a hierarchy of regular, geometrically similar regions (such as cubes, hyperrectangles etc.). The tree structure allows quick focusing on regions of interest, which facilitates the design of fast algorithms. As an example, consider the problem of ﬁnding all points in a data set that lie within a given distance from a query point, commonly known as the spherical region query. In the absence of any data organization, this requires checking

19-1

© 2005 by Chapman & Hall/CRC

19-2

Handbook of Data Structures and Applications

the distance from the query point to each point in the data set. If a quadtree of the data is available, large regions that lie outside the spherical region of interest can be quickly discarded from consideration, resulting in great savings in execution time. Furthermore, the unit aspect ratio employed in most quadtree data structures allows geometric arguments useful in designing fast algorithms for certain classes of applications. In constructing a quadtree, one starts with a square, cubic or hypercubic region (depending on the dimensionality) that encloses the spatial data under consideration. The diﬀerent variants of the quadtree data structure are diﬀerentiated by the principle used in the recursive decomposition process. One important aspect of the decomposition process is if the decomposition is guided by input data or is based on the principle of equal subdivision of the space itself. The former results in a tree size proportional to the size of the input. If all the input data is available a priori, it is possible to make the data structure height balanced. These attractive properties come at the expense of diﬃculty in making the data structure dynamic, typically in accommodating deletion of data. If the decomposition is based on equal subdivision of space, the resulting tree depends on the distribution of spatial data. As a result, the tree is height balanced and is linear in the size of input only when the distribution of the spatial data is uniform, and the height and size properties deteriorate with increase in nonuniformity of the distribution. The beneﬁcial aspect is that the tree structure facilitates easy update operations and the regularity in the hierarchical representation of the regions facilitates geometric arguments helpful in designing algorithms. Another important aspect of the decomposition process is the termination condition to stop the subdivision process. This identiﬁes regions that will not be subdivided further, which will be represented by leaves in the quadtree. Quadtrees have been used as ﬁxed resolution data structures, where the decomposition stops when a preset resolution is reached, or as variable resolution data structures, where the decomposition stops when a property based on input data present in the region is satisﬁed. They are also used in a hybrid manner, where the decomposition is stopped when either a resolution level is reached or when a property is satisﬁed. Quadtrees are used to represent many types of spatial data including points, line segments, rectangles, polygons, curvilinear objects, surfaces, volumes and cartographic data. Their use is pervasive spanning many application areas including computational geometry, computer aided design (Chapter 52), computer graphics (Chapter 54), databases (Chapter 60), geographic information systems (Chapter 55), image processing (Chapter 57), pattern recognition, robotics and scientiﬁc computing. Introduction of the quadtree data structure and its use in applications involving spatial data dates back to the early 1970s and can be attributed to the work of Klinger [20], Finkel and Bentley [3], and Hunter [16]. Due to extensive research over the last three decades, a large body of literature is available on quadtrees and its myriad applications. For a detailed study on this topic, the reader is referred to the classic textbooks by Samet [29, 30]. Development of quadtree like data structures, algorithms and applications continues to be an active research area with signiﬁcant research developments in recent years. In this chapter, we attempt a coverage of some of the classical results together with some of the more recent developments in the design and analysis of algorithms using quadtrees and octrees.

19.2

Quadtrees for Point Data

We ﬁrst explore quadtrees in the context of the simplest type of spatial data − multidimensional points. Consider a set of n points in d dimensional space. The principal reason a spatial data structure is used to organize multidimensional data is to facilitate queries

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-3

11 00 0 1 9 0 1

00 11 10

4 SW 3

1 0 0 1

00 11 1

2 0 1 00 11

1 0 0 81

4

3

NE

SE 6

SW

NE

1

2

SW 5

9

NW SE 8

NW 7

10

6

5 11 00

11 00 7

11 00

FIGURE 19.1: A two dimensional set of points and a corresponding point quadtree.

requiring spatial information. A number of such queries can be identiﬁed for point data. For example: 1. Range query: Given a range of values for each dimension, ﬁnd all the points that lie within the range. This is equivalent to retrieving the input points that lie within a speciﬁed hyperrectangular region. Such a query is often useful in database information retrieval. 2. Spherical region query: Given a query point p and a radius r, ﬁnd all the points that lie within a distance of r from p. In a typical molecular dynamics application, spherical region queries centered around each of the input points is required. 3. All nearest neighbor query: Given n points, ﬁnd the nearest neighbor of each point within the input set. While quadtrees are used for eﬃcient execution of such spatial queries, one must also design algorithms for the operations required of almost any data structure such as constructing the data structure itself, and accommodating searches, insertions and deletions. Though such algorithms will be covered ﬁrst, it should be kept in mind that the motivation behind the data structure is its use in spatial queries. If all that were required was search, insertion and deletion operations, any one dimensional organization of the data using a data structure such as a binary search tree would be suﬃcient.

19.2.1

Point Quadtrees

The point quadtree is a natural generalization of the binary search tree data structure to multiple dimensions. For convenience, ﬁrst consider the two dimensional case. Start with a square region that contains all of the input points. Each node in the point quadtree corresponds to an input point. To construct the tree, pick an arbitrary point and make it the root of the tree. Using lines parallel to the coordinate axis that intersect at the selected point (see Figure 19.1), divide the region into four subregions corresponding to the southwest, northwest, southeast and northeast quadrants, respectively. Each of the subregions is recursively decomposed in a similar manner to yield the point quadtree. For points that lie at the boundary of two adjacent regions, a convention can be adopted to

© 2005 by Chapman & Hall/CRC

19-4

Handbook of Data Structures and Applications

treat the points as belonging to one of the regions. For instance, points lying on the left and bottom edges of a region may be considered included in the region, while points lying on the top and right edges are not. When a region corresponding to a node in the tree contains a single point, it is considered a leaf node. Note that point quadtrees are not unique and their structure depends on the selection of points used in region subdivisions. Irrespective of the choices made, the resulting tree will have n nodes, one corresponding to each input point. If all the input points are known in advance, it is easy to choose the points for subdivision so as to construct a height balanced tree. A simple way to do this is to sort the points with one of the coordinates, say x, as the primary key and the other coordinate, say y, as the secondary key. The ﬁrst subdivision point is chosen to be the median of this sorted data. This will ensure that none of the children of the root node receives more than half the points. In O(n) time, such a sorted list can be created for each of the four resulting subregions. As the total work at every level of the tree is bounded by O(n), and there are at most O(log n) levels in the tree, a height balanced point quadtree can be built in O(n log n) time. Generalization to d dimensions is immediate, with O(dn log n) run time. The recursive structure of a point quadtree immediately suggests an algorithm for searching. To search for a point, compare it with the point stored at the root. If they are diﬀerent, the comparison immediately suggests the subregion containing the point. The search is directed to the corresponding child of the root node. Thus, search follows a path in the quadtree until either the point is discovered, or a leaf node is reached. The run time is bounded by O(dh), where h is the height of the tree. To insert a new point not already in the tree, ﬁrst conduct a search for it which ends in a leaf node. The leaf node now corresponds to a region containing two points. One of them is chosen for subdividing the region and the other is inserted as a child of the node corresponding to the subregion it falls in. The run time for point insertion is also bounded by O(dh), where h is the height of the tree after insertion. One can also construct the tree itself by repeated insertions using this procedure. Similar to binary search trees, the run time under a random sequence of insertions is expected to be O(n log n) [6]. Overmars and van Leeuwen [24] present algorithms for constructing and maintaining optimized point quadtrees irrespective of the order of insertions. Deletion in point quadtrees is much more complex. The point to be deleted is easily identiﬁed by a search for it. The diﬃculty lies in identifying a point in its subtree to take the place of the deleted point. This may require nontrivial readjustments in the subtree underneath. The reader interested in deletion in point quadtrees is referred to [27]. An analysis of the expected cost of various types of searches in point quadtrees is presented by Flajolet et al. [7]. For the remainder of the chapter, we will focus on quadtree data structures that use equal subdivision of the underlying space, called region quadtrees. This is because we regard Bentley’s multidimensional binary search trees [3], also called k-d trees, to be superior to point quadtrees. The k-d tree is a binary tree where a region is subdivided into two based only on one of the dimensions. If the dimension used for subdivision is cyclically rotated at consecutive levels in the tree, and the subdivision is chosen to be consistent with the point quadtree, then the resulting tree would be equivalent to the point quadtree but without the drawback of large degree (2d in d dimensions). Thus, it can be argued that point quadtrees are contained in k-d trees. Furthermore, recent results on compressed region quadtrees indicate that it is possible to simultaneously achieve the advantages of both region and point quadtrees. In fact, region quadtrees are the most widely used form of quadtrees despite their dependence on the spatial distribution of the underlying data. While their use posed theoretical inconvenience — it is possible to create as large a worst-case tree as

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-5

SW

NE

SE

00 11

10 00 11 0 1 0 9 1

SW

NW

NW

1

11 00 00 11 12 0 11 00 00 3 11 1 0

SE

00 11

6 1 0 0 1

SE 8

NW 5

5 00 11

1

NE

4

8 11 00 00 11

4

SE

SE 7

NE

NW

6

SE

NE

SW

3

2

9

NW 10

71 0

FIGURE 19.2: A two dimensional set of points and the corresponding region quadtree.

desired with as little as three points — they are widely acknowledged as the data structure of choice for practical applications. We will outline some of these recent developments and outline how good practical performance and theoretical performance guarantees can both be achieved using region quadtrees.

19.2.2

Region Quadtrees

The region quadtree for n points in d dimensions is deﬁned as follows: Consider a hypercube large enough to enclose all the points. This region is represented by the root of the ddimensional quadtree. The region is subdivided into 2d subregions of equal size by bisecting along each dimension. Each of these regions containing at least one point is represented as a child of the root node. The same procedure is recursively applied to each child of the root node. The process is terminated when a region contains only a single point. This data structure is also known as the point region quadtree, or PR-quadtree for short [31]. At times, we will simply use the term quadtree when the tree implied is clear from the context. The region quadtree corresponding to a two dimensional set of points is shown in Figure 19.2. Once the enclosing cube is speciﬁed, the region quadtree is unique. The manner in which a region is subdivided is independent of the speciﬁc location of the points within the region. This makes the size of the quadtree sensitive to the spatial distribution of the points. Before proceeding further, it is useful to establish a terminology to describe the type of regions that correspond to nodes in the quadtree. Call a hypercubic region containing all the points the root cell. Deﬁne a hierarchy of cells by the following: The root cell is in the hierarchy. If a cell is in the hierarchy, then the 2d equal-sized cubic subregions obtained by bisecting along each dimension of the cell are also called cells and belong to the hierarchy (see Figure 19.3 for an illustration of the cell hierarchy in two dimensions). We use the term subcell to describe a cell that is completely contained in another. A cell containing the subcell is called a supercell. The subcells obtained by bisecting a cell along each dimension are called the immediate subcells with respect to the bisected cell. Also, a cell is the immediate supercell of any of its immediate subcells. We can treat a cell as a set of all points in space contained in the cell. Thus, we use C ⊆ D to indicate that the cell C is a subcell of the cell D and C ⊂ D to indicate that C is a subcell of D but C = D. Deﬁne the length of a cell C, denoted length(C), to be the span of C along any dimension.

© 2005 by Chapman & Hall/CRC

19-6

Handbook of Data Structures and Applications

(1)

(2)

C

(3)

D F

(4)

E G

H

FIGURE 19.3: Illustration of hierarchy of cells in two dimensions. Cells D, E, F and G are immediate subcells of C. Cell H is an immediate subcell of D, and is a subcell of C.

An important property of the cell hierarchy is that, given two arbitrary cells, either one is completely contained in the other or they are disjoint. cells are considered disjoint if they are adjacent to each other and share a boundary. Each node in a quadtree corresponds to a subcell of the root cell. Leaf nodes correspond to largest cells that contain a single point. There are as many leaf nodes as the number of points, n. The size of the quadtree cannot be bounded as a function of n, as it depends on the spatial distribution. For example, consider a data set of 3 points consisting of two points very close to each other and a faraway point located such that the ﬁrst subdivision of the root cell will separate the faraway point from the other two. Then, depending on the speciﬁc location and proximity of the other two points, a number of subdivisions may be necessary to separate them. In principle, the location and proximity of the two points can be adjusted to create as large a worst-case tree as desired. In practice, this is an unlikely scenario due to limits imposed by computer precision. From this example, it is intuitively clear that a large number of recursive subdivisions may be required to separate points that are very close to each other. In the worst case, the recursive subdivision continues until the cell sizes are so small that a single cell cannot contain both the points irrespective of their location. Subdivision is never required beyond this point, but the points may be separated sooner depending on their actual location. Let s be the smallest distance between any pair of points and D be the length of the root cell. An upper bound on the height of the quadtree is obtained by considering the worst-case path needed to separate a pair of points which have the smallest pairwise distance. The length of the smallest cell that can contain two points s apart in d dimensions is √sd (see Figure 19.4 for a two and three dimensional illustration). The paths separating the closest points may contain recursive subdivisions until a cell of length smaller than √sd is reached. Since each subdivision halves the length of the√cells, the maximum path length is given by the smallest k for which 2Dk < √sd , or k = log dD s . For a ﬁxed number of dimensions, the

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-7

s 2

s 3

FIGURE 19.4: Smallest cells that could possibly contain two points that are a distance s apart in two and three dimensions.

worst-case path length is O(log Ds ). Since the tree has n leaves, the number of nodes in the tree is bounded by O(n log D s ). In the worst case, D is proportional to the largest distance between any pair of points. Thus, the height of a quadtree is bounded by the logarithm of the ratio of the largest pairwise distance to the smallest pairwise distance. This ratio is a measure of the degree of nonuniformity of the distribution. Search, insert and delete operations in region quadtrees are rather straightforward. To search for a point, traverse a path from root to a leaf such that each cell on the path encloses the point. If the leaf contains the point, it is in the quadtree. Otherwise, it is not. To insert a point not already in the tree, search for the point which terminates in a leaf. The leaf node corresponds to a region which originally had one point. To insert a new point which also falls within the region, the region is subdivided as many times as necessary until the two points are separated. This may create a chain of zero or more length below the leaf node followed by a branching to separate the two points. To delete a point present in the tree, conduct a search for the point which terminates in a leaf. Delete the leaf node. If deleting the node leaves its parent with a single child, traverse the path from the leaf to the root until a node with at least two children is encountered. Delete the path below the level of the child of this node. Each of the search, insert and delete operations takes O(h) time, where h is the height of the tree. Construction of a quadtree can be done either through repeated insertions, or by constructing the by level starting from the root. In tree level either case, the worst case run time is O n log D . We will not explore these algorithms s further in favor of superior algorithms to be described later.

19.2.3

Compressed Quadtrees and Octrees

In an n-leaf tree where each internal node has at least two children, the number of nodes is bounded by 2n − 1. The size of quadtrees is distribution dependent because there can be internal nodes with only one child. In terms of the cell hierarchy, a cell may contain all its points in a small volume so that, recursively subdividing it may result in just one of the immediate subcells containing the points for an arbitrarily large number of steps. Note that the cells represented by nodes along such a path have diﬀerent sizes but they all enclose the same points. In many applications, all these nodes essentially contain the same information as the information depends only on the points the cell contains. This prompted the development of compressed quadtrees, which are obtained by compressing each such path into a single node. Therefore, each node in a compressed quadtree is either a leaf or has at least two children. The compressed quadtree corresponding to the quadtree of Figure 19.2 is depicted in Figure 19.5. Compressed quadtrees originated from the work

© 2005 by Chapman & Hall/CRC

19-8

Handbook of Data Structures and Applications

1 10 0 11 00 9

SW

SW

1 0 0 1

1 0 0 1

02 1 00 11 3

1

18 0 0 1

4

5 1 0 0 1

6

1 0

NW

NW

1

NE

SE

SE

NE

4

SW 8

SE

NE

NW

3

2

5

SE 7

9

NW 10

NE 6

0 71 0 1

FIGURE 19.5: The two-dimensional set of points from Figure 19.2, and the corresponding compressed quadtree.

of Clarkson [4] in the context of the all nearest neighbors problem and further studied by Aluru and Sevilgen [2]. A node v in the compressed quadtree is associated with two cells, large cell of v (L(v)) and small cell of v (S(v)). They are the largest and smallest cells that enclose the points in the subtree of the node, respectively. When S(v) is subdivided, it results in at least two non-empty immediate subcells. For each such subcell C resulting from the subdivision, there is a child u such that L(u) = C. Therefore, L(u) at a node u is an immediate subcell of S(v) at its parent v. A node is a leaf if it contains a single point and the small cell of a leaf node is the hypothetical cell with zero length containing the point. The size of a compressed quadtree is bounded by O(n). The height of a compressed quadtree has a lower bound of Ω(log n) and an upper bound of O(n). Search, insert and delete operations on compressed quadtrees take O(h) time. In practice, the height of a compressed quadtree is signiﬁcantly smaller than suggested by the upper bound because a) computer precision limits restrict the ratio of largest pairwise distance to smallest pairwise distance that can be represented, and b) the ratio of length scales represented by a compressed quadtree of height h is at least 2h : 1. In most practical applications, the height of the tree is so small that practitioners use representation schemes that allow only trees of constant height [12, 37] or even assume that the height is constant in algorithm analysis [11]. For instance, a compressed octree of height 20 allows potentially 820 = 260 leaf nodes and a length scale of 220 : 1 ≈ 106 : 1. Though compressed quadtrees are described as resulting from collapsing chains in quadtrees, such a procedure is not intended for compressed quadtree construction. Instead, algorithms for direct construction of compressed quadtrees in O(dn log n) time will be presented, which can be used to construct quadtrees eﬃciently if necessary. To obtain a quadtree from its compressed version, identify each node whose small cell is not identical to its large cell and replace it by a chain of nodes corresponding to the hierarchy of cells that lead from the large cell to the small cell.

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-9

FIGURE 19.6: Z-curve for 2 × 2, 4 × 4 and 8 × 8 cell decompositions.

19.2.4

Cell Orderings and Space-Filling Curves

We explore a suitable one dimensional ordering of cells and use it in conjunction with spatial ordering to develop eﬃcient algorithms for compressed quadtrees. First, deﬁne an ordering for the immediate subcells of a cell. In two dimensions, we use the order SW, NW, SE and NE. The same ordering has been used to order the children of a node in a two dimensional quadtree (Figure 19.2 and Figure 19.5). Now consider ordering two arbitrary cells. If one of the cells is contained in the other, the subcell precedes the supercell. If the two cells are disjoint, the smallest supercell enclosing both the cells contains them in diﬀerent immediate subcells of it. Order the cells according to the order of the immediate subcells containing them. This deﬁnes a total order on any collection of cells with a common root cell. It follows that the order of leaf regions in a quadtree corresponds to the left-or-right order in which the regions appear in our drawing scheme. Similarly, the ordering of all regions in a quadtree corresponds to the postorder traversal of the quadtree. These concepts naturally extend to higher dimensions. Note that any ordering of the immediate subcells of a cell can be used as foundation for cell orderings. Ordering of cells at a particular resolution in the manner described above can be related to space ﬁlling curves. Space ﬁlling curves are proximity preserving mappings from a multidimensional uniform cell decomposition to a one dimensional ordering. The path implied in the multidimensional space by the linear ordering, i.e., the sequence in which the multidimensional cells are visited according to the linear ordering, forms a non-intersecting curve. Of particular interest is Morton ordering, also known as the Z-space ﬁlling curve [22]. The Z-curves for 2 × 2, 4 × 4 and 8 × 8 cell decompositions are shown in Figure 19.6. Consider a square two dimensional region and its 2k × 2k cell decomposition. The curve is considered to originate in the lower left corner and terminate in the upper right corner. The curve for a 2k × 2k grid is composed of four 2k−1 × 2k−1 grid curves one in each quadrant of the 2k × 2k grid and the tail of one curve is connected to the head of the next as shown in the ﬁgure. The order in which the curves are connected is the same as the order of traversal of the 2 × 2 curve. Note that Morton ordering of cells is consistent with the cell ordering speciﬁed above. Other space ﬁlling curves orderings such as graycode [5] and Hilbert [13] curve can be used and quadtree ordering schemes consistent with these can also be utilized. We will continue to utilize the Z-curve ordering as it permits a simpler bit interleaving scheme which will be presented and exploited later. Algorithms on compressed quadtree rely on the following operation due to Clarkson [4]:

© 2005 by Chapman & Hall/CRC

19-10

Handbook of Data Structures and Applications

Let R be the product of d intervals I1 × I2 × . . . × Id , i.e., R is a hyperrectangular region in d dimensional space. The smallest cell containing R can be found in O(d) time, which is constant for any ﬁxed d.

LEMMA 19.1

The procedure for computing the smallest cell uses ﬂoor, logarithm and bitwise exclusiveor operations. An extended RAM model is assumed in which these are considered constant time operations. The reader interested in proof of Lemma 19.1 is referred to [1, 4]. The operation is useful in several ways. For example, the order in which two points appear in the quadtree as per our ordering scheme is independent of the location of other points. To determine the order for two points, say (x1 , x2 , . . . , xd ) and (y1 , y2 , . . . , yd ), ﬁnd the smallest cell that contains [x1 , y1 ] × [x2 , y2 ] × . . . × [xd , yd ]. The points can then be ordered according to its immediate subcells that contain the respective points. Similarly, the smallest cell containing a pair of other cells, or a point and a cell, can be determined in O(d) time.

19.2.5

Construction of Compressed Quadtrees

A Divide-and-Conquer Construction Algorithm

Let T1 and T2 be two compressed quadtrees representing two distinct sets S1 and S2 of points. Let r1 (respectively, r2 ) be the root node of T1 (respectively, T2 ). Suppose that L(r1 ) = L(r2 ), i.e., both T1 and T2 are constructed starting from a cell large enough to contain S1 ∪ S2 . A compressed quadtree T for S1 ∪ S2 can be constructed in O(|S1 | + |S2 |) time by merging T1 and T2 . To merge T1 and T2 , start at their roots and merge the two trees recursively. Suppose that at some stage during the execution of the algorithm, node u in T1 and node v in T2 are being considered. An invariant of the merging algorithm is that L(u) and L(v) cannot be disjoint. Furthermore, it can be asserted that S(u) ∪ S(v) ⊆ L(u) ∩ L(v). In merging two nodes, only the small cell information is relevant because the rest of the large cell (L(v) − S(v)) is empty. For convenience, assume that a node may be empty. If a node has less than 2d children, we may assume empty nodes in place of the absent children. Four distinct cases arise: • Case I: If a node is empty, the result of merging is simply the tree rooted at the other node. • Case II: If S(u) = S(v), the corresponding children of u and v have the same large cells which are the the immediate subcells of S(u) (or equivalently, S(v)). In this case, merge the corresponding children one by one. • Case III: If S(v) ⊂ S(u), the points in v are also in the large cell of one of the children of u. Thus, this child of u is merged with v. Similarly, if S(u) ⊂ S(v), u is merged with the child of v whose large cell contains S(u). • Case IV: If S(u) ∩ S(v) = Ø, then the smallest cell containing both S(u) and S(v) contains S(u) and S(v) in diﬀerent immediate subcells. In this case, create a new node in the merged tree with its small cell as the smallest cell that contains S(u) and S(v) and make u and v the two children of this node. Subtrees of u and v are disjoint and need not be merged. Two compressed quadtrees with a common root cell can be merged in time proportional to the sum of their sizes.

LEMMA 19.2

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-11

Proof The merging algorithm presented above performs a preorder traversal of each compressed quadtree. The whole tree may not need to be traversed because in merging a node, it may be determined that the whole subtree under the node directly becomes a subtree of the resulting tree. In every step of the merging algorithm, we advance on one of the trees after performing at most O(d) work. Thus, the run time is proportional to the sum of the sizes of the trees to be merged.

To construct a compressed quadtree for n points, scan the points and ﬁnd the smallest and largest coordinate along each dimension. Find a region that contains all the points and use this as the root cell of every compressed quadtree constructed in the process. Recursively construct compressed quadtrees for n2 points and the remaining n2 points and merge them in O(dn) time. The compressed quadtree for a single point is a single node v with the root cell as L(v). The run time satisﬁes the recurrence n n T (n) = T + T + O(dn) 2 2 resulting in O(dn log n) run time. Bottom-up Construction

To perform a bottom-up construction, ﬁrst compute the order of the points in O(dn log n) time using any optimal sorting algorithm and the ordering scheme described previously. The compressed quadtree is then incrementally constructed starting from the single node tree for the ﬁrst point and inserting the remaining points as per the sorted list. During the insertion process, keep track of the most recently inserted leaf. Let p be the next point to be inserted. Starting from the most recently inserted leaf, traverse the path from the leaf to the root until the ﬁrst node v such that p ∈ L(v) is encountered. Two possibilities arise: • Case I: If p ∈ / S(v), then p is in the region L(v) − S(v), which was empty previously. The smallest cell containing p and S(v) is a subcell of L(v) and contains p and S(v) in diﬀerent immediate subcells. Create a new node u between v and its parent and insert p as a child of u. • Case II: If p ∈ S(v), v is not a leaf node. The compressed quadtree presently does not contain a node that corresponds to the immediate subcell of S(v) that contains p, i.e., this immediate subcell does not contain any of the points previously inserted. Therefore, it is enough to insert p as a child of v corresponding to this subcell. Once the points are sorted, the rest of the algorithm is identical to a post-order walk on the ﬁnal compressed quadtree with O(d) work per node. The number of nodes visited per insertion is not bounded by a constant but the number of nodes visited over all insertions is O(n), giving O(dn) run time. Combined with the initial sorting of the points, the tree can be constructed in O(dn log n) time.

19.2.6

Basic Operations

Fast algorithms for operations on quadtrees can be designed by simultaneously keeping track of spatial ordering and one dimensional ordering of cells in the compressed quadtree. The spatial ordering is given by the compressed quadtree itself. In addition, a balanced binary search tree (BBST) is maintained on the large cells of the nodes to enable fast cell searches. Both the trees consist of the same nodes and this can be achieved by allowing

© 2005 by Chapman & Hall/CRC

19-12

Handbook of Data Structures and Applications

each node to have pointers corresponding to compressed quadtree structure and pointers corresponding to BBST structure. Point and Cell Queries

Point and cell queries are similar since a point can be considered to be a zero length cell. A node v is considered to represent cell C if S(v) ⊆ C ⊆ L(v). The node in the compressed quadtree representing the given cell is located using the BBST. Traverse the path in the BBST from the root to the node that is being searched in the following manner: To decide which child to visit next on the path, compare the query cell with the large and small cells at the node. If the query cell precedes the small cell in cell ordering, continue the search with the left child. If it succeeds the large cell in cell ordering, continue with the right child. If it lies between the small cell and large cell in cell ordering, the node represents the query cell. As the height of a BBST is O(log n), the time taken for a point or cell query is O(d log n). Insertions and Deletions

As points can be treated as cells of zero length, insertion and deletion algorithms will be discussed in the context of cells. These operations are meaningful only if a cell is inserted as a leaf node or deleted if it is a leaf node. Note that a cell cannot be deleted unless all its subcells are previously deleted from the compressed quadtree. Cell Insertion

To insert a given cell C, ﬁrst check whether it is represented in the compressed quadtree. If not, it should be inserted as a leaf node. Create a node v with S(v) = C and ﬁrst insert v in the BBST using a standard binary search tree insertion algorithm. To insert v in the compressed quadtree, ﬁrst ﬁnd the BBST successor of v, say u. Find the smallest cell D containing C and the S(u). Search for cell D in the BBST and identify the corresponding node w. If w is not a leaf, insert v as a child of w in compressed quadtree. If w is a leaf, create a new node w such that S(w ) = D. Nodes w and v become the children of w in the compressed quadtree. The new node w should be inserted in the BBST. The overall algorithm requires a constant number of insertions and searches in the BBST, and takes O(d log n) time. Cell Deletion

As in insertion, the cell should be deleted from the BBST and the compressed quadtree. To delete the cell from BBST, the standard deletion algorithm is used. During the execution of this algorithm, the node representing the cell is found. The node is deleted from the BBST only if it is present as a leaf node in the compressed quadtree. If the removal of this node from the compressed quadtree leaves its parent with only one child, the parent is deleted as well. Since each internal node has at least two children, the delete operation cannot propagate to higher levels in the compressed quadtree.

19.2.7

Practical Considerations

In most practical applications, the height of a region quadtree is rather small because the spatial resolution provided by a quadtree is exponential in its height. This can be used to design schemes that will greatly simplify and speedup quadtree algorithms. Consider numbering the 22k cells of a 2k × 2k two dimensional cell decomposition in the

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-13

order speciﬁed by the Z-curve using integers 0 . . . 4k − 1 (Figure 19.6). Represent each cell in the cell space using a coordinate system with k bits for each coordinate. From the deﬁnition of the Z-curve, it follows that the number of a cell can be obtained by interleaving the bits representing the x and y coordinates of the cell, starting from the x coordinate. For example, (3, 5) = (011, 101) translates to 011011 = 27. The procedure can be extended to higher dimensions. If (x1 , x2 , . . . xd ) represents the location of a d dimensional cell, the corresponding number can be obtained by taking bit representations of x1 , x2 , . . . xd , and interleaving them. The same procedure can be described using uncompressed region quadtrees. Label the 2d edges connecting a node to its children with bit strings of length d. This is equivalent to describing the immediate subcells of a cell using one bit for each coordinate followed by bit interleaving. A cell can then be described using concatenation of the bits along the path from the root to the cell. This mechanism can be used to simultaneously describe cells at various length scales. The bit strings are conveniently stored in groups of 32 or 64 bits using integer data types. This creates a problem in distinguishing certain cells. For instance, consider distinguishing cell “000” from cell “000000” in an octree. To ensure each bit string translates to a unique integer when interpreted as a binary number, it is preﬁxed by a 1. It also helps in easy determination of the length of a bit string by locating the position of the leftmost 1. This leads to a representation that requires dk + 1 bits for a d dimensional quadtree with a height of at most k. Such a representation is very beneﬁcial because primitive operations on cells can be implemented using bit operations such as and, or, exclusive-or etc. For example, 128 bits (4 integers on a 32 bit computer and 2 integers on a 64 bit computer) are suﬃcient to describe an octree of height 42, which allows representation of length scales 242 : 1 > 4 × 1012 : 1. The bit string based cell representation greatly simpliﬁes primitive cell operations. In the following, the name of a cell is also used to refer to its bit representation: • Check if C1 ⊆ C2 . If C2 is a preﬁx of C1 , then C1 is contained in C2 , otherwise not. • Find the smallest cell enclosing C1 and C2 . This is obtained by ﬁnding the longest common preﬁx of C1 and C2 whose length is 1 mod d. • Find the immediate subcell of C1 that contains C2 . If dl + 1 is the number of bits representing C1 , the required immediate subcell is given by the ﬁrst (d + 1)l + 1 bits of C2 . Consider n points in a root cell and let k denote the largest resolution to be used. Cells are not subdivided further even if they contain multiple points. From the coordinates of a point, it is easy to compute the leaf cell containing it. Because of the encoding scheme used, if cell C should precede cell D in the cell ordering, the number corresponding to the binary interpretation of the bit string representation of C is smaller than the corresponding number for D. Thus, cells can be sorted by simply treating them as numbers and ordering them accordingly. Finally, binary search trees and the attendant operations on them can be completely avoided by using hashing to directly access a cell. An n leaf compressed quadtree has at most 2n − 1 nodes. Hence, an array of that size can be conveniently used for hashing. If all cells at the highest resolution are contained in the quadtree, i.e., n = dk , then an array of size 2n − 1 can be used to directly index cells. Further details of such representation are left as an exercise to the reader.

© 2005 by Chapman & Hall/CRC

19-14

19.3

Handbook of Data Structures and Applications

Spatial Queries with Region Quadtrees

In this section, we consider a number of spatial queries involving point data, and algorithms for them using compressed region quadtrees.

19.3.1

Range Query

Range queries are commonly used in database applications. Database records with d keys can be represented as points in d-dimensional space. In a range query, ranges of values are speciﬁed for all or a subset of keys with the objective of retrieving all the records that satisfy the range criteria. Under the mapping of records to points in multidimensional space, the ranges deﬁne a (possibly open-ended) hyperrectangular region. The objective is to retrieve all the points that lie in this query region. As region quadtrees organize points using a hierarchy of cells, the range query can be answered by ﬁnding a collection C of cells that are both fully contained in the query region and completely encompass the points in it. This can be achieved by a top-down traversal of the compressed region quadtree starting from the root. To begin with, C is empty. Consider a node v and its small cell S(v). If S(v) is outside the query region, the subtree underneath it can be safely discarded. If S(v) is completely inside the query region, it is added to C. All points in the subtree of S(v) are within the query region and reported as part of the output. If S(v) overlaps with the query region but is not contained in it, each child of v is examined in turn. If the query region is small compared to the size of the root cell, it is likely that a path from the root is traversed where each cell on the path completely contains the query region. To avoid this problem, ﬁrst compute the smallest cell encompassing the query region. This cell can be searched in O(d log n) time using the cell search algorithm described before, or perhaps in O(d) time if the hashing/indexing technique is applicable. The top-down traversal can start from the identiﬁed cell. When the cell is subdivided, at least two of its children represent cells that overlap with the query region. Consider a child cell and the part of the query region that is contained in it. The same idea can be recursively applied by ﬁnding the smallest cell that encloses this part of the query region and directly ﬁnding this cell rather than walking down a path in the tree to reach there. This ensures that the number of cells examined during the algorithm is O(|C|). To see why, consider the cells examined as organized into a tree based on subcell-supercell relationships. The leaves of the tree are the collection of cells C. Each cell in the tree is the smallest cell that encloses a subregion of the query region. Therefore, each internal node has at least two children. Consequently, the size of the tree, or the number of cells examined in answering the range query is O(|C|). For further study of range queries and related topics, see [5, 23, 25]. Next, we turn our attention to a number of spatial queries which we categorize as group queries. In group queries, a query to retrieve points that bear a certain relation to a query point is speciﬁed. The objective of the group query is to simultaneously answer n queries with each input point treated as a query point. For example, given n points, ﬁnding the nearest neighbor of each point is a group query. While the run time of performing the query on an individual point may be large, group queries can be answered more eﬃciently by intelligently combining the work required in answering queries for the individual points. Instead of presenting a diﬀerent algorithm for each query, we show that the same generic framework can be used to solve a number of such queries. The central idea behind the group query algorithm is to realize run time savings by processing queries together for nearby points. Consider a cell C in the compressed quadtree and the (as yet uncomputed) set of points that result from answering the query for each point in C. The algorithm

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-15

Algorithm 1 Group-query (v) P = active set at v’s parent A = active set at v = Ø While P = Ø do u = Select (P ) P = P − {u} decision = Status (v, u) If decision = PROCESS Process (v, u) If decision = UNKNOWN If S(u) ⊆ S(v) A = A ∪ {u} Else P = P ∪ children(u) For each child u of v Group-query (u) FIGURE 19.7: Uniﬁed algorithm for the group queries.

keeps track of a collection of cells of size as close to C as possible that is guaranteed to contain these points. The algorithm proceeds in a hierarchical manner by computing this information for cells of decreasing sizes (see Figure 19.7). A node u is said to be resolved with respect to node v if, either all points in S(u) are in the result of the query for all points in S(v) or none of the points in S(u) is in the result of the query for any point in S(v). Deﬁne the active set of a node v to be the set of nodes u that cannot be resolved with respect to v such that S(u) ⊆ S(v) ⊆ L(u). The algorithm uses a depth ﬁrst search traversal of the compressed quadtree. The active set of the root node contains itself. The active set of a node v is calculated by traversing portions of the subtrees rooted at the nodes in the active set of its parent. The functions Select, Status and Process used in the algorithm are designed based on the speciﬁc group query. When considering the status of a node u with respect to the node v, the function Status(v,u) returns one of the following three values: • PROCESS – If S(u) is in the result of the query for all points in S(v) • DISCARD – If S(u) is not in the result of the query for all points in S(v) • UNKNOWN – If neither of the above is true If the result is either PROCESS or DISCARD, the children of u are not explored. Otherwise, the size of S(u) is compared with the size of S(v). If S(u) ⊆ S(v), then u is added to the set of active nodes at v for consideration by v’s children. If S(u) is larger, then u’s children are considered with respect to v. It follows that the active set of a leaf node is empty, as the length of its small cell is zero. Therefore, entire subtrees rooted under the active set of the parent of a leaf node are explored and the operation is completed for the point inhabiting that leaf node. The function Process(v,u) reports all points in S(u) as part of the result of query for each point in S(v). The order in which nodes are considered is important for proving the run time of some operations. The function Select is used to accommodate this.

© 2005 by Chapman & Hall/CRC

19-16

19.3.2

Handbook of Data Structures and Applications

Spherical Region Queries

Given a query point and a distance r > 0, the spherical region query is to ﬁnd all points that lie within a distance of r from the query point. The group version of the spherical region query is to take n points and a distance r > 0 as input, and answer spherical region queries with respect to each of the input points. A cell D may contain points in the spherical region corresponding to some points in cell C only if the smallest distance between D and C is less than r. If the largest distance between D and C is less than r, then all points in D are in the spherical region of every point in C. Thus, the function Status(v,u) is deﬁned as follows: If the largest distance between S(u) and S(v) is less than r, return PROCESS. If the smallest distance between S(u) and S(v) is greater than r, return DISCARD. Otherwise, return UNKNOWN. Processing u means including all the points in u in the query result for each point in v. For this query, no special selection strategy is needed.

19.3.3

k -Nearest Neighbors

For computing the k-nearest neighbors of each point, some modiﬁcations to the algorithm presented in Figure 19.7 are necessary. For each node w in P , the algorithm keeps track of the largest distance between S(v) and S(w). Let dk be the k th smallest of these distances. If the number of nodes in P is less than k, then dk is set to ∞. The function Status(v,u) returns DISCARD if the smallest distance between S(v) and S(u) is greater than dk . The option PROCESS is never used. Instead, for a leaf node, all the points in the nodes in its active set are examined to select the k nearest neighbors. The function Select picks the largest cell in P , breaking ties arbitrarily. Computing k-nearest neighbors is a well-studied problem [4, 35]. The algorithm presented here is equivalent to Vaidya’s algorithm [35, 36], even though the algorithms appear to be very diﬀerent on the surface. Though Vaidya does not consider compressed quadtrees, the computations performed by his algorithm can be related to traversal on compressed quadtrees and a proof of the run time of the presented algorithm can be established by a correspondence with Vaidya’s algorithm. The algorithm runs in O(kn) time. The proof is quite elaborate, and omitted for lack of space. For details, see [35, 36]. The special case of n = 1 is called the all nearest neighbor query, which can be computed in O(n) time.

19.4

Image Processing Applications

Quadtrees are ubiquitously used in image processing applications. Consider a two dimensional square array of pixels representing a binary image with black foreground and white background (Figure 19.8). As with region quadtrees used to represent point data, a hierarchical cell decomposition is used to represent the image. The pixels are the smallest cells used in the decomposition and the entire image is the root cell. The root cell is decomposed into its four immediate subcells and represented by the four children of the root node. If a subcell is completely composed of black pixels or white pixels, it becomes a leaf in the quadtree. Otherwise, it is recursively decomposed. If the resolution of the image is 2k × 2k , the height of the resulting region quadtree is at most k. A two dimensional image and its corresponding region quadtree are shown in Figure 19.8. In drawing the quadtree, the same ordering of the immediate subcells of a cell into SW, NW, SE and NE quadrants is followed. Each node in the tree is colored black, white, or gray, depending on if the cell consists of all black pixels, all white pixels, or a mixture of both black and white pixels, respectively. Thus, internal nodes are colored gray and leaf nodes are colored either black or white.

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-17

SW

NW

SE

NE

FIGURE 19.8: A two dimensional array of pixels, and the corresponding region quadtree.

Each internal node in the image quadtree has four children. For an image with n leaf nodes, the number of internal nodes is (n−1) 3 . For large images, the space required for storing the internal nodes and the associated pointers may be expensive and several space-eﬃcient storage schemes have been investigated. These include storing the quadtree as a collection of leaf cells using the Morton numbering of cells [21], or as a collection of black leaf cells only [8, 9], and storing the quadtree as its preorder traversal [19]. Iyengar et al. introduced a number of space-eﬃcient representations of image quadtrees including forests of quadtrees [10, 26], translation invariant data structures [17, 32, 33] and virtual quadtrees [18]. The use of quadtrees can be easily extended to grayscale images and color images. Signiﬁcant space savings can be realized by choosing an appropriate scheme. For example, 2r gray levels can be encoded using r bits. The image can be represented using r binary valued quadtrees. Because adjacent pixels are likely to have gray levels that are closer, a gray encoding of the 2r levels is advantageous over a binary encoding [19]. The gray encoding has the property that adjacent levels diﬀer by one bit in the gray code representation. This should lead to larger blocks having the same value for a given bit position, leading to shallow trees.

19.4.1

Construction of Image Quadtrees

Region quadtrees for image data can be constructed using an algorithm similar to the bottom-up construction algorithm for point region quadtrees described in Subsection 19.2.5. In fact, constructing quadtrees for image data is easier because the smallest cells in the hierarchical decomposition are given by the pixels and all the pixels can be read by the algorithm as the image size is proportional to the number of pixels. Thus, quadtree for region data can be built in time linear in the size of the image, which is optimal. The pixels of the image are scanned in Morton order which eliminates the need for the sorting step in the bottom-up construction algorithm. It is wasteful to build the complete quadtree with all pixels as leaf nodes and then compact the tree by replacing maximal subtrees having all black or all white pixels with single leaf nodes, though such a method would still run in linear time and space. By reading the pixels in Morton order, a maximal black or white cell can be readily identiﬁed and the tree can be constructed using only such maximal cells as leaf nodes [27]. This will limit the space used by the algorithm to the ﬁnal size of the quadtree.

© 2005 by Chapman & Hall/CRC

19-18

19.4.2

Handbook of Data Structures and Applications

Union and Intersection of Images

The union of two images is the overlay of one image over another. In terms of the array of pixels, a pixel in the union is black if the pixel is black in at least one of the images. In the region quadtree representation of images, the quadtree corresponding to the union of two images should be computed from the quadtrees of the constituent images. Let I1 and I2 denote the two images and T1 and T2 denote the corresponding region quadtrees. Let T denote the region quadtree of the union of I1 and I2 . It is computed by a preorder traversal of T1 and T2 and examining the corresponding nodes/cells. Let v1 in T1 and v2 in T2 be nodes corresponding to the same region. There are three possible cases: • Case I: If v1 or v2 is black, the corresponding node is created in T and is colored black. If only one of them is black and the other is gray, the gray node will contain a subtree underneath. This subtree need not be traversed. • Case II: If v1 (respectively, v2 ) is white, v2 (respectively, v1 ) and the subtree underneath it (if any) is copied to T . • Case III: If both v1 and v2 are gray, then the corresponding children of v1 and v2 are considered. The tree resulting from the above merging algorithm may consist of unnecessary subdivisions of a cell consisting of completely black pixels. For example, if a region is marked gray in both T1 and T2 but each of the four quadrants of the region is black in at least one of T1 and T2 , then the node corresponding to the region in T will have four children colored black. This is unnecessary as the node itself can be colored black and should be considered a leaf node. Such adjustments need not be local and may percolate up the tree. For instance, consider a checker board image of 2k × 2k pixels with half black and half white pixels such that the north, south, east and west neighbors of a black pixel are white pixels and vice versa. Consider another checker board image with black and white interchanged. The quadtree for each of these images is a full 4-ary tree of level k. But overlaying one image over another produces one black square of size 2k × 2k . The corresponding quadtree should be a single black node. However, merging initially creates a full 4-ary tree of depth k. To compact the tree resulting from merging to create the correct region quadtree, a bottom-up traversal is performed. If all children of a node are black, then the children are removed and the node is colored black. The intersection of two images can be computed similarly. A pixel in the intersection of two images is black only if the corresponding pixels in both the images are black. For instance, the intersection of the two complementary checkerboard images described above is a single white cell of size 2k × 2k . The algorithm for intersection can be obtained by interchanging the roles of black and white in the union algorithm. Similarly, a bottomup traversal is used to detect nodes all of whose children are white, remove the children, and color the node white. Union and intersection algorithms can be easily generalized to multiple images.

19.4.3

Rotation and Scaling

Quadtree representation of images facilitates certain types of rotation and scaling operations. Rotations on images are often performed in multiples of 90 degrees. Such a rotation has the eﬀect of changing the quadrants of a region. For example, a 90 degree clockwise rotation changes the SW, NW, SE, NE quadrants to NW, NE, SW, SE quadrants, respectively. This change should be recursively carried out for each region. Hence, a rotation that is a multiple of 90 degrees can be eﬀected by simply reordering the child pointers of each

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-19

node. Similarly, scaling by a power of two is trivial using quadtrees since it is simply a loss of resolution. For other linear transformations, see the work of Hunter [14, 15].

19.4.4

Connected Component Labeling

Two black pixels of a binary image are considered adjacent if they share a horizontal or vertical boundary. A pair of black pixels is said to be connected if there is a sequence of adjacent pixels leading from one to the other. A connected component is a maximal set of black pixels where every pair of pixels is connected. The connected component labeling problem is to ﬁnd the connected components of a given image and give each connected component a unique label. Identifying the connected components of an image is useful in object counting and image understanding. Samet developed algorithms for connected component labeling using quadtrees [28]. Let B and W denote the number of black nodes and white nodes, respectively, in the quadtree. Samet’s connected component labeling algorithm works in three stages: 1. Establish the adjacency relationships between pairs of black pixels. 2. Identify a unique label for each connected component. This can be thought of as computing the transitive closure of the adjacency relationships. 3. Label each black cell with the corresponding connected component. The ﬁrst stage is carried out using a postorder traversal of the quadtree during which adjacent black pixels are discovered and identiﬁed by giving them the same label. To begin with, all the black nodes are unlabeled. When a black region is considered, black pixels adjacent to it in two of the four directions, say north and east, are searched. The post order traversal of the tree traverses the regions in Morton order. Thus when a region is encountered, its south and west adjacent black regions (if any) would have already been processed. At that time, the region would have been identiﬁed as a neighbor. Thus, it is not necessary to detect adjacency relationships between a region and its south or west adjacent neighbors. Suppose the postorder traversal is currently at a black node or black region R. Adjacent black regions in a particular direction, say north, are identiﬁed as follows. First, identify the adjacent region of the same size as R that lies to the north of R. Traverse the quadtree upwards to the root to identify the ﬁrst node on the path that contains both the regions, or equivalently, ﬁnd the lowest common ancestor of both the regions in the quadtree. If such a node does not exist, R has no north neighbor and it is at the boundary of the image. Otherwise, a child of this lowest common ancestor will be a region adjacent to the north boundary of R and of the same size as or larger than R. If this region is black, it is part of the same connected component as R. If neither the region nor R is currently labeled, create a new label and use it for both. If only one of them is labeled, use the same label for the other. If they are both already labeled with the same label, do nothing. If they are both already labeled with diﬀerent labels, the label pair is recorded as corresponding to an adjacency relationship. If the region is gray, it is recursively subdivided and adjacent neighbors examined to ﬁnd all black regions that are adjacent to R. For each black neighbor, the labeling procedure described above is carried out. The run time of this stage of the algorithm depends on the time required to ﬁnd the north and east neighbors. This process can be improved using the smallest-cell primitive described earlier. However, Samet proved that the average of the maximum number of nodes visited by the above algorithm for a given black region and a given direction is smaller than or equal to 5, under the assumption that a black region is equally likely to occur at any

© 2005 by Chapman & Hall/CRC

19-20

Handbook of Data Structures and Applications

position and level in the quadtree [28]. Thus, the algorithm should take time proportional to the size of the quadtree, i.e., O(W + B) time. Stage two of the algorithm is best performed using the union-ﬁnd data structure [34]. Consider all the labels that are used in stage one and treat them as singleton sets. For every pair of labels recorded in stage one, perform a ﬁnd operation to ﬁnd the two sets that contain the labels currently, and do a union operation on the sets. At the end of stage two, all labels used for the same connected component will be grouped together in one set. This can be used to provide a unique label for each set (called the set label), and subsequently identify the set label for each label. The number of labels used is bounded by B. The amortized run time per operation using the union-ﬁnd data structure is given by the inverse Ackermann’s function [34], a constant (≤ 4) for all practical purposes. Therefore, the run time of stage two can be considered to be O(B). Stage three of the algorithm can be carried out by another postorder traversal of the quadtree to replace the label of each black node with the corresponding set label in O(B + W ) time. Thus, the entire algorithm runs in O(B + W ) time.

19.5

Scientiﬁc Computing Applications

Region quadtrees are widely used in scientiﬁc computing applications. Most of the problems are three dimensional, prompting the development of octree based methods. In fact, some of the practical techniques and shortcuts presented earlier for storing region quadtrees and bit string representation of cells owe their origin to applications in scientiﬁc computing. Octree are used in many ways in scientiﬁc computing applications. In many scientiﬁc computing applications, the behavior of a physical system is captured through either 1) a discretization of the space using a ﬁnite grid, followed by determining the quantities of interest at each of the grid cells, or 2) computing the interactions between a system of (real or virtual) particles which can be related to the behavior of the system. The former are known as grid-based methods and typically correspond to the solution of diﬀerential equations. The latter are known as particle-based methods and often correspond to the solution of integral equations. Both methods are typically iterative and the spatial information, such as the hierarchy of grid cells or the spatial distribution of the particles, often changes from iteration to iteration. Examples of grid-based methods include ﬁnite element methods, ﬁnite diﬀerence methods, multigrid methods and adaptive mesh reﬁnement methods. Many applications use a cell decomposition of space as the grid or grid hierarchy and the relevance of octrees for such applications is immediate. Algorithms for construction of octrees and methods for cell insertions and deletions are all directly applicable to such problems. It is also quite common to use other decompositions, especially for the ﬁnite-element method. For example, a decomposition of a surface into triangular elements is often used. In such cases, each basic element can be associated with a point (for example, the centroid of a triangle), and an octree can be built using the set of points. Information on the neighboring elements required by the application is then related to neighborhood information on the set of points. Particle based methods include such simulation techniques as molecular dynamics, smoothed particle hydrodynamics, and N-body simulations. These methods require many of the spatial queries discussed in this chapter. For example, van der Waal forces between atoms in molecular dynamics fall oﬀ so rapidly with increasing distance (inversely proportional to the sixth power of the distance between atoms) that a cutoﬀ radius is employed. In computing the forces acting on an individual atom, van der Waal forces are taken into account only for atoms that lie within the cutoﬀ radius. The list of such atoms is typically referred to as the

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-21

neighbor list. Computing neighbor lists for all atoms is just a group spherical region query, already discussed before. Similarly, k-nearest neighbors are useful in applications such as smoothed particle hydrodynamics. In this section, we further explore the use of octrees in scientiﬁc computing by presenting an optimal algorithm for the N-body problem.

19.5.1

The N-body Problem

The N-body problem is deﬁned as follows: Given n bodies and their positions, where each pair of bodies interact with a force inversely proportional to the square of the distance between them, compute the force on each body due to all other bodies. A direct algorithm for computing all pairwise interactions requires O(n2 ) time. Greengard’s fast multipole method [11], which uses an octree data structure, reduces this complexity by approximating the interaction between clusters of bodies instead of computing individual interactions. For each cell in the octree, the algorithm computes a multipole expansion and a local expansion. The multipole expansion at a cell C, denoted φ(C), is the eﬀect of the bodies within C on distant bodies. The local expansion at C, denoted ψ(C), is the eﬀect of all distant bodies on bodies within C. The N-body problem can be solved in O(n) time using a compressed octree [2]. For two cells C and D which are not necessarily of the same size, deﬁne a predicate wellseparated(C, D) to be true if D’s multipole expansion converges at any point in C, and false otherwise. If two cells are not well-separated, they are proximate. Similarly, two nodes v1 and v2 in the compressed octree are said to be well-separated if and only if S(v1 ) and S(v2 ) are well-separated. Otherwise, we say that v1 and v2 are proximate. For each node v in the compressed octree, the multipole expansion φ(v) and the local expansion ψ(v) need to be computed. Both φ(v) and ψ(v) are with respect to the cell S(v). The multipole expansions can be computed by a simple bottom-up traversal in O(n) time. For a leaf node, its multipole expansion is computed directly. At an internal node v, φ(v) is computed by aggregating the multipole expansions of the children of v. The algorithm to compute the local expansions is given in Figure 19.9. The astute reader will notice that this is the same group query algorithm described in Section 19.3, reproduced here again with slightly diﬀerent notation for convenience. The computations are done using a top-down traversal of the tree. To compute local expansion at node v, consider the set of nodes that are proximate to its parent, which is the proximity set, P (parent(v)). The proximity set of the root node contains only itself. Recursively decompose these nodes until each node is either 1) well-separated from v or 2) proximate to v and the length of the small cell of the node is no greater than the length of S(v). The nodes satisfying the ﬁrst condition form the interaction set of v, I(v) and the nodes satisfying the second condition are in the proximity set of v, P (v). In the algorithm, the set E(v) contains the nodes that are yet to be processed. Local expansions are computed by combining parent’s local expansion and the multipole expansions of the nodes in I(v). For the leaf nodes, potential calculation is completed by using the direct method. The following terminology is used in analyzing the run time of the algorithm. The set of cells that are proximate to C and having same length as C is called the proximity set of C and is deﬁned by P = (C) = {D | length(C) = length(D), ¬well-separated(C, D)}. The superscript “= ” is used to indicate that cells of the same length are being considered. For node v, deﬁne the proximity set P(v) as the set of all nodes proximate to v and having the small cell no greater than and large cell no smaller than S(v). More precisely, P (v) = {w | ¬wellseparated(S(v), S(w)), length(S(w)) ≤ length(S(v)) ≤ length(L(w))}. The interaction set I(v) of v is deﬁned as I(v) = {w | well-separated(S(v), S(w)), [ w ∈ P (parent(v)) ∨ {∃u ∈ P (parent(v)), w is a descendant of u, ¬well-sep(v, parent(w)), length(S(v)) <

© 2005 by Chapman & Hall/CRC

19-22

Handbook of Data Structures and Applications

Algorithm 2 Compute-Local-Exp (v) I. Find the proximity set P (v) and interaction set I(v) for v E(v) = P (parent(v)) I(v) = Ø; P (v) = Ø While E(v) = Ø do Pick some u ∈ E(v) E(v) = E(v) − {u} If well-separated(S(v), S(u)) I(v) = I(v) ∪ {u} Else if S(u) ⊆ S(v) P (v) = P (v) ∪ {u} Else E(v) = E(v) ∪ children(u) II. Calculate the local expansion at v Assign shifted ψ(parent(v)) to ψ(v) For each node u ∈ I(v) Add shifted φ(u) to ψ(v) III. Calculate the local expansions at the children of v with recursive calls For each child u of v Compute-Local-Exp (u) FIGURE 19.9: Algorithm for calculating local expansions of all nodes in the tree rooted at v.

length(S(parent(w)))}]}. We use parent(w) to denote the parent of the node w. The algorithm achieves O(n) run time for any predicate well-separated that satisﬁes the following three conditions: C1. The relation well-separated is symmetric for equal length cells, that is, length(C) = length(D) ⇒ well-separated(C, D) = well-separated(D, C). C2. For any cell C, |P = (C)| is bounded by a constant. C3. If two cells C and D are not well-separated, any two cells C and D such that C ⊆ C and D ⊆ D are not well-separated as well. These three conditions are respected by the various well-separatedness criteria used in Nbody algorithms and in particular, Greengard’s algorithm. In N-body methods, the wellseparatedness decision is solely based on the geometry of the cells and their relative distance and is oblivious to the number of bodies or their distribution within the cells. Given two cells C and D of the same length, if D can be approximated with respect to C, then C can be approximated with respect to D as well, as stipulated by Condition C1. The size of the proximity sets of cells of the same length should be O(1) as prescribed by Condition C2 in order that an O(n) algorithm is possible. Otherwise, an input that requires processing the proximity sets of Ω(n) such cells can be constructed, making an O(n) algorithm impossible. Condition C3 merely states that two cells C and D are not well-separated unless every subcell of C is well-separated from every subcell of D . LEMMA 19.3

For any node v in the compressed octree, |P (v)| = O(1).

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

19-23

Consider any node v. Each u ∈ P (v) can be associated with a unique cell C ∈ P = (S(v)) such that S(u) ⊆ C. This is because any subcell of C which is not a subcell of S(u) is not represented in the compressed octree. It follows that |P (v)| ≤ |P = (S(v))| = O(1) (by Condition C2). Proof

LEMMA 19.4 The sum of interaction set sizes over all nodes in the compressed octree is linear in the number of nodes in the compressed octree i.e., v |I(v)| = O(n). Proof Let v be a node in the compressed octree. Consider any w ∈ I(v), either w ∈ P (parent(v)) or w is in the subtree rooted by a node u ∈ P (parent(v)). Thus,

|I(v)|

v

=

|{w | w ∈ I(v), w ∈ P (parent(v))}|

v

+

|{w | w ∈ I(v), w ∈ / P (parent(v))}|.

v

Consider these two summations separately. The bound for the ﬁrst summation is easy; From Lemma 19.3, |P (parent(v))| = O(1). So,

|{w | w ∈ I(v), w ∈ P (parent(v))}| =

v

O(1) = O(n).

v

The second summation should be explored more carefully.

|{w | w ∈ I(v), w ∈ / P (parent(v))}| =

v

|{v | w ∈ I(v), w ∈ / P (parent(v))}|

w

In what follows, we bound the size of the set M (w) = {v | w ∈ I(v), w ∈ / P (parent(v))} for any node. Since w ∈ / P (parent(v)), there exists a node u ∈ P (parent(v)) such that w is in the subtree rooted by u. Consider parent(w): The node parent(w) is either u or a node in the subtree rooted at u. In either case, length(S(parent(w))) ≤ length(S(parent(v))). Thus, for each v ∈ M (w), there exists a cell C such that S(v) ⊆ C ⊆ S(parent(v)) and length(S(parent(w))) = length(C). Further, since v and parent(w) are not wellseparated, C and S(parent(w)) are not well-separated as well by Condition C3. That is to say S(parent(w)) ∈ P = (C) and C ∈ P = (S(parent(w))) by Condition C1. By Condition C2, we know that |P = (S(parent(w)))| = O(1). Moreover, for each cell C ∈ P = (S(parent(w))), there are at most 2d choices of v because length(C) ≤ length(S(parent(v))). As a result, |M (w)| ≤ 2d × O(1) = O(1) for any node w. Thus, |I(v)| = |{v | w ∈ I(v), v w w∈ / P (parent(v))}| = w O(1) = O(n). THEOREM 19.1

Given a compressed octree for n bodies, the N-body problem can be

solved in O(n) time. Proof Computing the multipole expansion at a node takes constant time and the number of nodes in the compressed octree is O(n). Thus, total time required for the multipole expansion calculation is O(n). The nodes explored during the local expansion calculation

© 2005 by Chapman & Hall/CRC

19-24

Handbook of Data Structures and Applications

at a node v are either in P (v) or I(v). In both cases, it takes constant time to process a node. By Lemma 19.3 and 19.4, the total size of both sets for all nodes in the compressed octree is bounded by O(n). Thus, local expansion calculation takes O(n) time. As a conclusion, the running time of the fast multipole algorithm on the compressed octree takes O(n) time irrespective of the distribution of the bodies. It is interesting to note that the same generic algorithmic framework is used for spherical region queries, all nearest neighbors, k-nearest neighbors and solving the N-body problem. While the proofs are diﬀerent, the algorithm also provides optimal solution for k-nearest neighbors and the N-body problem. While this chapter is focused on applications of quadtrees and octrees in image processing and scientiﬁc computing applications, they are used for many other types of spatial data and in the context of numerous other application domains. A detailed study of the design and analysis of quadtree based data structures and their applications can be found in [29, 30].

Acknowledgment This work was supported, in part, by the National Science Foundation under grant ACI0306512.

References [1] S. Aluru, J. L. Gustafson, G. M. Prabhu, and F. E. Sevilgen. Distribution-independent hierarchical algorithms for the N -body problem. The Journal of Supercomputing, 12(4):303–323, 1998. [2] S. Aluru and F. Sevilgen. Dynamic compressed hyperoctrees with application to the N-body problem. In Springer-Verlag Lecture Notes in Computer Science, volume 19, 1999. [3] J. L. Bentley. Multidimensional binary search trees used for associative searching. Communications of the ACM, 18(9):509–517, 1975. [4] K. L. Clarkson. Fast algorithms for the all nearest neighbors problem. In 24th Annual Symposium on Foundations of Computer Science (FOCS ’83), pages 226–232, 1982. [5] C. Faloutsos. Gray codes for partial match and range queries. IEEE Transactions on Software Engineering, 14(10):1381–1393, 1988. [6] R. A. Finkel and J. L. Bentley. Quad trees: a data structure for retrieval on composite key. Acta Informatica, 4(1):1–9, 1974. [7] P. Flajolet, G. Gonnet, C. Puech, and J. M. Robson. The analysis of multidimensional searching in quad-trees. In Alok Aggarwal, editor, Proceedings of the 2nd Annual ACM-SIAM Symposium on Discrete Algorithms (SODA ’90), pages 100–109, San Francisco, CA, USA, 1990. [8] I. Gargantini. An eﬀective way to represent quadtrees. Communications of the ACM, 25(12):905–910, 1982. [9] I. Gargantini. Translation, rotation and superposition of linear quadtrees. International Journal of Man-Machine Studies, 18(3):253–263, 1983. [10] N. K. Gautier, S. S. Iyengar, N. B. Lakhani, and M. Manohar. Space and time eﬃciency of the forest-of-quadtrees representation. Image and Vision Computing, 3:63–70, 1985. [11] L. F. Greengard. The Rapid Evaluation of Potential Fields in Particle Systems. MIT Press, 1988. [12] B. Hariharan, S. Aluru, and B. Shanker. A scalable parallel fast multipole method

© 2005 by Chapman & Hall/CRC

Quadtrees and Octrees

[13] [14] [15] [16] [17] [18] [19]

[20] [21] [22] [23]

[24] [25]

[26] [27] [28] [29] [30] [31]

[32] [33] [34]

19-25

for analysis of scattering from perfect electrically conducting surfaces. In SC’2002 Conference CD, http://www.supercomp.org, 2002. D. Hilbert. Uber die stegie abbildung einer linie auf ﬂachenstuck. 38:459–460, 1891. G. M. Hunter and K. Steiglitz. Linear transformation of pictures represented by quad trees. Computer Graphics and Image Processing, 10(3):289–296, 1979. G. M. Hunter and K. Steiglitz. Operations on images using quad trees. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1(2):143–153, 1979. G. M. Hunter. Eﬃcient computation and data structures for graphics. PhD thesis, Princeton University, Princeton, N.J., USA, 1978. S. S. Iyengar and H. Gadagkar. Translation invariant data structure for 3-D binary images. Pattern Recognition Letters, 7:313–318, 1988. L. P. Jones and S. S. Iyengar. Space and time eﬃcient virtual quadtrees. IEEE Transactions on Pattern Analysis and Machine Intelligence, 6:244–247, 1984. E. Kawaguchi, T. Endo, and J. Matsunaga. Depth-ﬁrst expression viewed from digital picture processing. IEEE Transactions on Pattern Analysis and Machine Intelligence, 5(4):373–384, 1983. A. Klinger. Optimizing methods in statistics, chapter Patterns and search statistics, pages 303–337. 1971. A. Klinger and M. L. Rhodes. Organization and access of image data by areas. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1(1):50–60, 1979. G. M. Morton. A computer oriented geodetic data base and a new technique in ﬁle sequencing. Technical report, IBM, Ottawa, Canada, 1966. J. A. Orenstein and T. H. Merrett. A class of data structures for associative searching. In Proceedings of the Fourth ACM SIGACT-SIGMOD Symposium on Principles of Database Systems, pages 181–190, 1984. M. H. Overmars and J. van Leeuwen. Dynamic multi-dimentional data structures based on quad- and K − D trees. Acta Informatica, 17:267–285, 1982. B. Pagel, H. Six, H. Toben, and P. Widmayer. Toward an analysis of range query performance in spatial data structures. In Proceedings of the Twelfth ACM SIGACTSIGMOD-SIGART Symposium on Principles of Database Systems, pages 214–221, 1993. V. Raman and S. S. Iyengar. Properties and applications of forests of quadtrees for pictorial data representation. BIT, 23(4):472–486, 1983. H. Samet. Deletion in two-dimentional quad trees. Communications of the ACM, 23(12):703–710, 1980. H. Samet. Connected component labeling using quadtrees. Journal of the ACM, 28(3):487–501, 1981. H. Samet. Applications of Spatial Data Structures: Computer Graphics, Image Processing, and GIS. Addison-Wesley, Reading, MA, 1989. H. Samet. The Design and Analysis of Spatial Data Structures. Addison-Wesley, Reading, MA, 1989. H. Samet, A. Rosenfeld, C. A. Shaﬀer, and R. E. Webber. Processing geographic data with quadtrees. In Seventh Int. Conference on Pattern Recognition, pages 212–215. IEEE Computer Society Press, 1984. D. S. Scott and S. S. Iyengar. A new data structure for eﬃcient storing of images. Pattern Recognition Letters, 3:211–214, 1985. D. S. Scott and S. S. Iyengar. Tid – a translation invariant data structure for storing images. Communications of the ACM, 29(5):418–429, 1986. R. E. Tarjan. Eﬃciency of a good but not linear disjoint set union algorithm. Journal of the ACM, 22:215–225, 1975.

© 2005 by Chapman & Hall/CRC

19-26

Handbook of Data Structures and Applications

[35] P. M. Vaidya. An optimal algorithm for the All-Nearest-Neighbors problem. In 27th Annual Symposium on Foundations of Computer Science, pages 117–122. IEEE, 1986. [36] P. M. Vaidya. An O(n log n) algorithm for the All-Nearest-Neighbors problem. Discrete and Computational Geometry, 4:101–115, 1989. [37] M. Warren and J. Salmon. A parallel hashed-octree N-body algorithm. In Proceedings of Supercomputing ’93, 1993.

© 2005 by Chapman & Hall/CRC

20 Binary Space Partitioning Trees 20.1 20.2 20.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BSP Trees as a Multi-Dimensional Search Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Visibility Orderings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20-1 20-3 20-5

Total Ordering of a Collection of Objects • Visibility Ordering as Tree Traversal • Intra-Object Visibility

20.4

Bruce F. Naylor University of Texas, Austin

20.1

BSP Tree as a Hierarchy of Regions . . . . . . . . . . . . .

20-8

Tree Merging • Good BSP Trees • Converting B-reps to Trees • Boundary Representations vs. BSP Trees

Introduction

In most applications involving computation with 3D geometric models, manipulating objects and generating images of objects are crucial operations. Performing these operations requires determining for every frame of an animation the spatial relations between objects: how they might intersect each other, and how they may occlude each other. However, the objects, rather than being monolithic, are most often comprised of many pieces, such as by many polygons forming the faces of polyhedra. The number of pieces may be anywhere from the 100’s to the 1,000,000’s. To compute spatial relations between n polygons by brute force entails comparing every pair of polygons, and so would require O(n2 ). For large scenes comprised of 105 polygons, this would mean 1010 operations, which is much more than necessary. The number of operations can be substantially reduced to anywhere from O(n log2 n) when the objects interpenetrate (and so in our example reduced to 106 ), to as little as constant time, O(1), when they are somewhat separated from each other. This can be accomplished by using Binary Space Partitioning Trees, also called BSP Trees. They provide a computational representation of space that simultaneously provides a search structure and a representation of geometry. The reduction in number of operations occurs because BSP Trees provide a kind of “spatial sorting”. In fact, they are a generalization to dimensions > 1 of binary search trees, which have been widely used for representing sorted lists. Figure 20.1 below gives an introductory example showing how a binary tree of lines, instead of points, can be used to “sort” four geometric objects, as opposed to sorting symbolic objects such as names. Constructing a BSP Tree representation of one or more polyhedral objects involves computing the spatial relations between polygonal faces once and encoding these relations in a binary tree (Figure 20.2). This tree can then be transformed and merged with other trees to very quickly compute the spatial relations (for visibility and intersections) between the polygons of two moving objects.

© 2005 by Chapman & Hall/CRC

20-2

Handbook of Data Structures and Applications

FIGURE 20.1: BSP Tree representation of inter-object spatial relations.

FIGURE 20.2: Partitioning Tree representation of intra-object spatial relations.

As long as the relations encoded by a tree remain valid, which for a rigid body is forever, one can reap the beneﬁts of having generated this tree structure every time the tree is used in subsequent operations. The return on investment manifests itself as substantially faster algorithms for computing intersections and visibility orderings. And for animation and interactive applications, these savings can accrue over hundreds of thousands of frames. BSP Trees achieve an elegant solution to a number of important problems in geometric computation by exploiting two very simple properties occurring whenever a single plane separates (lies between) two or more objects: 1) any object on one side of the plane cannot intersect any object on the other side, 2) given a viewing position, objects on the same side as the viewer can have their images drawn on top of the images of objects on the opposite side (Painter’s Algorithm). See Figure 20.3. These properties can be made dimension independent if we use the term “hyperplane” to refer to planes in 3D, lines in 2D, and in general for d-space, to a (d−1)-dimensional subspace deﬁned by a single linear equation. The only operation we will need for constructing BSP Trees is the partitioning of a convex region by a singe hyperplane into two child regions, both of which are also convex as a result (Figure 20.4). BSP Trees exploit the properties of separating planes by using one very simple but powerful technique to represent any object or collection of objects: recursive subdivision by hyperplanes. A BSP Tree is the recording of this process of recursive subdivision in the form of a binary tree of hyperplanes. Since there is no restriction on what hyperplanes are used, polytopes (polyhedra, polygons, etc.) can be represented exactly. A BSP Tree is a program for performing intersections between the hyperplane’s halfspaces and any other geometric entity. Since subdivision generates increasingly smaller regions of space, the order of the hyperplanes is chosen so that following a path deeper into the tree corresponds to adding more detail, yielding a multi-resolution representation. This leads to eﬃcient

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-3

FIGURE 20.3: Plane Power: sorting objects w.r.t a hyperplane.

FIGURE 20.4: Elementary operation used to construct BSP Trees.

intersection computations. To determine visibility, all that is required is choosing at each tree node which of the two branches to draw ﬁrst based solely on which branch contains the viewer. No other single representation of geometry inherently answers questions of intersection and visibility for a scene of 3D moving objects. And this is accomplished in a computationally eﬃcient and parallelizable manner.

20.2

BSP Trees as a Multi-Dimensional Search Structure

Spatial search structures are based on the same ideas that were developed in Computer Science during the 60’s and 70’s to solve the problem of quickly processing large sets of symbolic data, as opposed to geometric data, such as lists of people’s names. It was discovered that by ﬁrst sorting a list of names alphabetically, and storing the sorted list in an array, one can ﬁnd out whether some new name is already in the list in log2 n operations using a binary search algorithm, instead of n/2 expected operations required by a sequential search. This is a good example of extracting structure (alphabetical order) existing in the list of names and exploiting that structure in subsequent operations (looking up a name)

© 2005 by Chapman & Hall/CRC

20-4

Handbook of Data Structures and Applications

to reduce computation. However, if one wishes to permit additions and deletions of names while maintaining a sorted list, then a dynamic data structure is needed, i.e. one using pointers. One of the most common examples of such a data structure is the binary search tree. A binary search tree (See also Chapter 3) is illustrated in Figure 20.5, where it is being used to represent a set of integers S = { 0, 1, 4, 5, 6, 8 } lying on the real line. We have included both the binary tree and the hierarchy of intervals represented by this tree. To ﬁnd out whether a number/point is already in the tree, one inserts the point into the tree and follows the path corresponding to the sequence of nested intervals that contain the point. For a balanced tree, this process will take no more than O(log n) steps; for in fact, we have performed a binary search, but one using a tree instead of an array. Indeed, the tree itself encodes a portion of the search algorithm since it prescribes the order in which the search proceeds.

FIGURE 20.5: A binary search tree.

This now brings us back to BSP Trees, for as we said earlier, they are a generalization of binary search trees to dimensions > 1 (in 1D, they are essentially identical). In fact, constructing a BSP Tree can be thought of as a geometric version of Quick Sort. Modiﬁcations (insertions and deletions) are achieved by merging trees, analogous to merging sorted lists in Merge Sort. However, since points do not divide space for any dimension > 1, we must use hyperplanes instead of points by which to subdivide. Hyperplanes always partition a region into two halfspaces regardless of the dimension. In 1D, they look like points since they are also 0D sets; the one diﬀerence being the addition of a normal denoting the “greater than” side. In Figure 20.6, we show a restricted variety of BSP Trees that most clearly illustrates the generalization of binary search trees to higher dimensions. (You may want to call this a k-d tree, but the standard semantics of k-d trees does not include representing continuous sets of points, but rather ﬁnite sets of points.) BSP Trees are also a geometric variety of Decision Trees, which are commonly used for classiﬁcation (e.g. biological taxonomies), and are widely used in machine learning. Decision trees have also been used for proving lower bounds, the most famous showing that sorting is Ω(n log n). They are also the model of the popular “20 questions” game (I’m thinking of something and you have 20 yes/no question to guess what it is). For BSP Trees, the questions become “what side of a particular hyperplane does some piece of geometry lie”.

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-5

FIGURE 20.6: Extension of binary search trees to 2D as a BSP Tree.

20.3

Visibility Orderings

Visibility orderings are used in image synthesis for visible surface determination (hidden surface removal), shadow computations, ray tracing, beam tracing, and radiosity. For a given center of projection, such as the position of a viewer or of a light source, they provide an ordering of geometric entities, such as objects or faces of objects, consistent with the order in which any ray originating at the center might intersect the entities. Loosely speaking, a visibility ordering assigns a priority to each object or face so that closer objects have priority over objects further away. Any ray emanating from the center or projection that intersects two objects or faces, will always intersect the surface with higher priority ﬁrst. The simplest use of visibility orderings is with the “Painter’s Algorithm” for solving the hidden surface problem. Faces are drawn into a frame-buﬀer in far-to-near order (low-to-high priority), so that the image of nearer objects/polygons over-writes those of more distant ones. A visibility ordering can be generated using a single hyperplane; however, each geometric entity or “object” (polyhedron, polygon, line, point) must lie completely on one side of the hyperplane, i.e. no objects are allowed to cross the hyperplane. This requirement can always be induced by partitioning objects by the desired hyperplane into two “halves”. The objects on the side containing the viewer are said to have visibility priority over objects on the opposite side; that is, any ray emanating from the viewer that intersects two objects on opposite sides of the hyperplane will always intersect the near side object before it intersects the far side object. See Figures 20.7 and 20.8.

FIGURE 20.7: Left side has priority over right side.

© 2005 by Chapman & Hall/CRC

20-6

Handbook of Data Structures and Applications

FIGURE 20.8: Right side has priority over left side.

20.3.1

Total Ordering of a Collection of Objects

A single hyperplane cannot order objects lying on the same side, and so cannot provide a total visibility ordering. Consequently, in order to exploit this idea, we must extend it somehow so that a visibility ordering for the entire set of objects can be generated. One way to do this would be to create a unique separating hyperplane for every pair of objects. However, for n objects this would require n2 hyperplanes, which is too many.

FIGURE 20.9: Separating objects with a hyperplane.

The required number of separating hyperplanes can be reduced to as little as n by using the geometric version of recursive subdivision (divide and conquer). If the subdivision is performed using hyperplanes whose position and orientation is unrestricted, then the result is a BSP Tree. The objects are ﬁrst separated into two groups by some appropriately chosen hyperplane (Figure 20.9). Then each of the two groups is independently partitioned into two sub-groups (for a total now of 4 sub-groups). The recursive subdivision continues in a similar fashion until each object, or piece of an object, is in a separate cell of the partitioning. This process of partitioning space by hyperplanes is naturally represented as a binary tree (Figure 20.10).

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-7

FIGURE 20.10: Binary tree representation of space partitioning.

20.3.2

Visibility Ordering as Tree Traversal

How can this tree be used to generate a visibility ordering on the collection of objects? For any given viewing position, we ﬁrst determine on which side of the root hyperplane the viewer lies. From this we know that all objects in the near-side subtree have higher priority than all objects in the far-side subtree; and we have made this determination with only a constant amount of computation (in fact, only a dot product). We now need to order the near-side objects, followed by an ordering of the far-side objects. Since we have a recursively deﬁned structure, any subtree has the same form computationally as the whole tree. Therefore, we simply apply this technique for ordering subtrees recursively, going left or right ﬁrst at each node, depending upon which side of the node’s hyperplane the viewer lies. This results in a traversal of the entire tree, in near-to-far order, using only O(n) operations, which is optimal (this analysis is correct only if no objects have been split; otherwise it is > n).

20.3.3

Intra-Object Visibility

The schema we have just described is only for inter-object visibility, i.e. between individual objects. And only when the objects are both convex and separable by a hyperplane is the schema a complete method for determining visibility. To address the general unrestricted case, we need to solve intra-object visibility, i.e. correctly ordering the faces of a single object. BSP Trees can solve this problem as well. To accomplish this, we need to change our focus from convex cells containing objects to the idea of hyperplanes containing faces. Let us return to the analysis of visibility with respect to a hyperplane. If instead of ordering objects, we wish to order faces, we can exploit the fact that not only can faces lie on each side of a hyperplane as objects do, but they can also lie on the hyperplane itself. This gives us a 3-way ordering of: near → on → far (Figure 20.11). If we choose hyperplanes by which to partition space that always contain a face of an

© 2005 by Chapman & Hall/CRC

20-8

Handbook of Data Structures and Applications

FIGURE 20.11: Ordering of polygons: near → on → far.

object, then we can build a BSP Tree by applying this schema recursively as before, until every face lies in some partitioning hyperplane contained in the tree. To generate a visibility ordering of the faces in this intra-object tree, we use the method above with one extension: faces lying on hyperplanes are included in the ordering, i.e. at each node, we generate the visibility ordering of near-subtree → on-faces → far-subtree. Using visibility orderings provides an alternative to z-buﬀer based algorithms. They obviate the need for computing and comparing z-values, which is very susceptible to numerical error because of the perspective projection. In addition, they eliminate the need for z-buﬀer memory itself, which can be substantial (80Mbytes) if used at a sub-pixel resolution of 4x4 to provide anti-aliasing. More importantly, visibility orderings permit unlimited use of transparency (non-refractive) with no additional computational eﬀort, since the visibility ordering gives the correct order for compositing faces using alpha blending. And in addition, if a near-to-far ordering is used, then rendering completely occluded objects/faces can be eliminated, such as when a wall occludes the rest of a building, using a beam-tracing based algorithm.

20.4

BSP Tree as a Hierarchy of Regions

Another way to look at BSP Trees is to focus on the hierarchy of regions created by the recursive partitioning, instead of focusing on the hyperplanes themselves. This view helps us to see more easily how intersections are eﬃciently computed. The key idea is to think of a BSP Tree region as serving as a bounding volume: each node v corresponds to a convex volume that completely contains all the geometry represented by the subtree rooted at v. Therefore, if some other geometric entity, such as a point, ray, object, etc., is found to not intersect the bounding volume, then no intersection computations need be performed with any geometry within that volume. Consider as an example a situation in which we are given some test point and we want to ﬁnd which object if any this point lies in. Initially, we know only that the point lies somewhere space (Figure 20.12). By comparing the location of the point with respect to the ﬁrst partitioning hyperplane, we can ﬁnd in which of the two regions (a.k.a. bounding volumes) the point lies. This eliminates half of the objects (Figure 20.13). By continuing this process recursively, we are in eﬀect using the regions as a hierarchy of bounding volumes, each bounding volume being a rough approximation of the geometry it bounds, to quickly narrow our search (Figure 20.14). For a BSP Tree of a single object, this region-based (volumetric) view reveals how BSP Trees can provide a multi-resolution representation. As one descends a path of the tree, the

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-9

FIGURE 20.12: Point can lie anywhere.

FIGURE 20.13: Point must lie to the right of the hyperplane.

FIGURE 20.14: Point’s location is narrowed down to one object.

regions decrease in size monotonically. For curved objects, the regions converge in the limit to the curve/surface. Truncating the tree produces an approximation, ala the Taylor series of approximations for functions (Figure 20.15).

20.4.1

Tree Merging

The spatial relations between two objects, each represented by a separate tree, can be determined eﬃciently by merging two trees. This is a fundamental operation that can be used to solve a number of geometric problems. These include set operations for CSG modeling as well as collision detection for dynamics. For rendering, merging all object-trees into a single model-tree determines inter-object visibility orderings; and the model-tree can be intersected with the view-volume to eﬃciently cull away oﬀ-screen portions of the scene and provide solid cutaways with the near clipping plane. In the case where objects are

© 2005 by Chapman & Hall/CRC

20-10

Handbook of Data Structures and Applications

FIGURE 20.15: Multiresolution representation provided by BSP tree.

both transparent and interpenetrate, tree merging acts as a view independent geometric sorting of the object faces; each tree is used in a manner analogous to the way Merge Sort merges previously sorted lists to quickly created a new sorted list (in our case, a new tree). The model-tree can be rendered using ray tracing, radiosity, or polygon drawing using a far-to-near ordering with alpha blending for transparency. An even better alternative is multi-resolution beam-tracing, since entire occluded subtrees can be eliminated without visiting the contents of the subtree, and distance subtrees can be pruned to the desired resolution. Beam tracing can also be used to eﬃciently compute shadows. All of this requires as a basic operation an algorithm for merging two trees. Tree merging is a recursive process, which proceeds down the trees in a multi-resolution fashion, going from low-res to high-res. It is easiest to understand in terms of merging a hierarchy of bounding volumes. As the process proceeds, pairs of tree regions, a.k.a. convex bounding volumes, one from each tree, are compared to determine whether they intersect or not. If they do not, the contents of the corresponding subtrees are never compared. This has the eﬀect of “zooming in” on those regions of space where the surfaces of the two objects intersect (Figure 20.16).

FIGURE 20.16: Merging BSP Trees.

The algorithm for tree merging is quite simple once you have a routine for partitioning a tree by a hyperplane into two trees. The process can be thought of in terms of inserting

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-11

one tree into the other in a recursive manner. Given trees T1 and T2, at each node of T1 the hyperplane at that node is used to partition T2 into two “halves”. Then each half is merged with the subtree of T1 lying on the same side of the hyperplane. (In actuality, the algorithm is symmetric w.r.t. the role of T1 and T2 so that at each recursive call, T1 can split T2 or T2 can split T1.) Merge_Bspts : ( T1, T2 : Bspt ) -> Bspt Types BinaryPartitioner : { hyperplane, sub-hyperplane} PartitionedBspt : ( inNegHs, inPosHs : Bspt ) Imports Merge_Tree_With_Cell : ( T1, T2 : Bspt ) -> Bspt User defined semantics. Partition_Bspt : ( Bspt, BinaryPartitioner ) -> PartitionedBspt Definition IF T1.is_a_cell OR T2.is_a_cell THEN VAL := Merge_Tree_With_Cell( T1, T2 ) ELSE Partition_Bspt( T2, T1.binary_partitioner ) -> T2_partitioned VAL.neg_subtree := Merge_Bspts(T1.neg_subtree, T2_partitioned.inNegHs) VAL.pos_subtree:= Merge_Bspts(T1.pos_subtree, T2_partitioned.inPosHs ) END RETURN} VAL END Merge_Bspts While tree merging is easiest to understand in terms of comparing bounding volumes, the actual mechanism uses sub-hyperplanes, which is more eﬃcient. A sub-hyperplane is created whenever a region is partitioned by a hyperplane, and it is just the subset of the hyperplane lying within that region. In fact, all of the illustrations of trees we have used are drawings of sub-hyperplanes. In 3D, these are convex polygons, and they separate the two child regions of an internal node. Tree merging uses sub-hyperplanes to simultaneously determine the spatial relations of four regions, two from each tree, by comparing the two sub-hyperplanes at the root of each tree. For 3D, this is computed using two applications of convex-polygon clipping to a plane, and there are three possible outcomes: intersecting, non-intersecting and coincident (Figure 20.17). This is the only overtly geometric computation in tree merging; everything else is data structure manipulation.

FIGURE 20.17: Three cases (intersecting, non-intersecting, coincident) when comparing sub-hyperplanes during tree merging.

© 2005 by Chapman & Hall/CRC

20-12

20.4.2

Handbook of Data Structures and Applications

Good BSP Trees

For any given set, there exist an arbitrary number of diﬀerent BSP Trees that can represent that set. This is analogous to there being many diﬀerent programs for computing the same function, since a BSP Tree may in fact be interpreted as a computation graph specifying a particular search of space. Similarly, not all programs/algorithms are equally eﬃcient, and not all searches/trees are equally eﬃcient. Thus the question arises as to what constitutes a good BSP Tree. The answer is a tree that represents the set as a sequence of approximations. This provides a multi-resolution representation. By pruning the tree at various depths, diﬀerent approximations of the set can be created. Each pruned subtree is replaced with a cell containing a low degree polynomial approximation of the set represented by the subtree (Figures 20.18 and 20.19).

FIGURE 20.18: Before Pruning.

FIGURE 20.19: After Pruning.

In Figure 20.20, we show two quite diﬀerent ways to represent a convex polygon, only the second of which employs the sequence of approximations idea. The tree on the left subdivides space using lines radiating from the polygonal center, splitting the number of faces in half at each step of the recursive subdivision. The hyperplanes containing the polygonal edges are chosen only when the number of faces equals one, and so are last along any path. If the number of polygonal edges is n, then the tree is of size O(n) and of depth O(log n). In contrast, the tree on the right uses the idea of a sequence of approximations. The ﬁrst three partitioning hyperplanes form a ﬁrst approximation to the exterior while the next three form a ﬁrst approximation to the interior. This divides the set of edges into three sets. For each of these, we choose the hyperplane of the middle face by which to partition, and by doing so reﬁne our representation of the exterior. Two additional hyperplanes reﬁne the interior and divide the remaining set of edges into two nearly equal sized sets. This

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-13

process precedes recursively until all edges are in partitioning hyperplanes. Now, this tree is also of size O(n) and depth O(log n), and thus the worst case, say for point classiﬁcation, is the same for both trees. Yet they appear to be quite diﬀerent.

FIGURE 20.20: Illustration of bad vs. good trees.

This apparent qualitative diﬀerence can be made quantitative by, for example, considering the expected case for point classiﬁcation. With the ﬁrst tree, all cells are at depth log n, so the expected case is the same as the worst case regardless of the sample space from which a point is chosen. However, with the second tree, the top three out-cells would typically constitute most of the sample space, and so a point would often be classiﬁed as OUT by, on average, two point-hyperplane tests. Thus the expected case would converge to O(1) as the ratio of polygon-area/sample-area approaches 0. For line classiﬁcation, the two trees diﬀer not only in the expected case but also in the worst case: O(n) vs. O(log n). For merging two trees the diﬀerence is O(n2 ) vs. O(n log n). This reduces even further to O(log n) when the objects are only contacting each other, rather overlapping, as is the case for collision detection. However, there are worst case “basket weaving” examples that do require O(n2 ) operations. These are geometric versions of the Cartesian product, as for example when a checkerboard is constructed from n horizontal strips and n vertical strips to produce n × n squares. These examples, however, violate the Principle of Locality: that geometric features are local not global features. For almost all geometric models of physical objects, the geometric features are local features. Spatial partitioning schemes can accelerate computations only when the features are in fact local, otherwise there is no signiﬁcant subset of space that can be eliminated from consideration. The key to a quantitative evaluation, and also generation, of BSP Trees is to use expected case models, instead of worst-case analysis. Good trees are ones that have low expected cost for the operations and distributions of input of interest. This means, roughly, that high probability regions can be reached with low cost, i.e. they have short paths from the root to the corresponding node, and similarly low probability regions should have longer paths. This is exactly the same idea used in Huﬀman codes. For geometric computation, the probability of some geometric entity, such as a point, line segment, plane, etc., lying in some arbitrary region is typically correlated positively to the size of the region: the larger the region the greater the probability that a randomly chosen geometric entity will intersect that region. To compute the expected cost of a particular operation for a given tree, we need to know at each branch in the tree the probability of taking the left branch, p, and the probability of taking the right branch p+ . If we assign a unit cost to the partitioning

© 2005 by Chapman & Hall/CRC

20-14

Handbook of Data Structures and Applications

operation, then we can compute the expected cost exactly, given the branch probabilities, using the following recurrence relation: Ecost [T ]= IF T is a cell THEN 0 ELSE 1 + p− ∗ Ecost [T − ] + p+ ∗ Ecost [T + ] This formula does not directly express any dependency upon a particular operation; those characteristics are encoded in the two probabilities p− and p+ . Once a model for these is speciﬁed, the expected cost for a particular operation can be computed for any tree. As an example, consider point classiﬁcation in which a random point is chosen from a uniform distribution over some initial region R. For a tree region of r with child regions r+ and r− , we need the conditional probability of the point lying in r+ and r− , given that it lies in r. For a uniform distribution, this is determined by the sizes of the two child-regions relative to their parent: p+ = vol(r+ )/vol(r) p− = vol(r− )/vol(r) Similar models have been developed for line, ray and plane classiﬁcation. Below we describe how to use these to build good trees.

20.4.3

Converting B-reps to Trees

Since humans do not see physical objects in terms of binary trees, it is important to know how such a tree be constructed from something that is more intuitive. The most common method is to convert a boundary representation, which corresponds more closely to how humans see the world, into a tree. In order for a BSP Tree to represent a solid object, each cell of the tree must be classiﬁed as being either entirely inside or outside of the object; thus, each leaf node corresponds to either an in-cell or an out-cell. The boundary of the set then lies between in-cells and out-cells; and since the cells are bounded by the partitioning hyperplanes, it is necessary for the entire boundary to lie in the partitioning hyperplanes (Figure 20.21).

FIGURE 20.21: B-rep and Tree representation of a polygon.

Therefore, we can convert from a b-rep to a tree simply by using all of the face hyperplanes as partitioning hyperplanes. The face hyperplanes can be chosen in any order and the

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-15

resulting tree will always generate a convex decomposition of the interior and the exterior. If the hyperplane normals of the b-rep faces are consistently oriented to point to the exterior, then all left leaves will be in-cells and all right leaves will be out-cells. The following algorithm summarizes the process. Brep to Bspt: Brep b − > Bspt T IF b == NULL THEN T = if a left-leaf then an in-cell else an out-cell ELSE h = Choose Hyperplane(b) { b+ , b− , b0 } = Partition Brep(b,h) T.faces = b0 T.pos subtree = Brep to Bspt(b+ ) T.neg subtree = Brep to Bspt(b− ) END However, this does not tell us in what order to choose the hyperplanes so as to produce the best trees. Since the only known method for ﬁnding the optimal tree is by exhaustive enumeration, and there are at least n! trees given n unique face hyperplanes, we must employ heuristics. In 3D, we use both the face planes as candidate partitioning hyperplanes, as well as planes that go through face vertices and have predetermined directions, such as aligned with the coordinates axes. Given any candidate hyperplane, we can try to predict how eﬀective it will be using expected case models; that is, we can estimate the expected cost of a subtree should we choose this candidate to be at its root. We will then choose the least cost candidate. Given a region r containing boundary b which we are going to partition by a candidate h, we can compute exactly p+ and p− for a given operation, as well as the size of b+ and b− . However, we can only estimate Ecost [T + ] and Ecost [T − ]. The estimators for these values can depend only upon a few simple properties such as number of faces in each halfspace, how many faces would be split by this hyperplane, and how many faces lie on the hyperplane (or area of such faces). Currently, we use |b+ |n for Ecost [T + ], where n typically varies between .8 and .95, and similarly for Ecost [T − ]. We also include a small penalty for splitting a face by increasing its contribution to b+ and b− from 1.0 to somewhere between 1.25 and 1.75, depending upon the object. We also favor candidates containing larger surface area, both in our heuristic evaluation and by ﬁrst sorting the faces by surface area and considering only the planes of the top k faces as candidates. One interesting consequence of using expected case models is that choosing the candidate that attempts to balance the tree is usually not the best; instead the model prefers candidates that place small amounts of geometry in large regions, since this will result in high probability and low cost subtrees, and similarly large amounts of geometry in small regions. Balanced is optimal only when the geometry is uniformly distributed, which is rarely the case (Figure 20.22). More importantly, minimizing expected costs produces trees that represents the object as a sequence of approximations, and so in a multi-resolution fashion.

20.4.4

Boundary Representations vs. BSP Trees

Boundary Representations and BSP Trees may be viewed as complementary representations expressing diﬀerence aspects of geometry, the former being topological, the later expressing hierarchical set membership. B-reps are well suited for interactive speciﬁcation of geometry, expressing topological deformations, and scan-conversion. BSP Trees are well suited for intersection and visibility calculations. Their relationship is probably more akin to the capacitor vs. inductor, than the tube vs. transistor.

© 2005 by Chapman & Hall/CRC

20-16

Handbook of Data Structures and Applications

FIGURE 20.22: Balanced is not optimal for non-uniform distributions.

The most often asked question is what is the size of a BSP Tree representation of a polyhedron vs. the size of its boundary representation. This, of course, ignores the fact that expected cost, measured over the suite of operations for which the representation will be used, is the appropriate metric. Also, boundary representations must be supplemented by other devices, such as octrees, bounding volumes hierarchies, and z-buﬀers, in order to achieve an eﬃcient system; and so the cost of creating and maintaining these structure should be brought into the equation. However, given the intrinsic methodological diﬃculties in performing a compelling empirical comparison, we will close with a few examples giving the original number of b-rep faces and the resulting tree using our currently implemented tree construction machinery. The ﬁrst ratio is number-of-tree-faces/number-of-brep-faces. The second ratio is number-of-tree-nodes/number-of-brep-faces, where number-of-tree-nodes is the number of internal nodes. The last column is the expected cost in terms of point, line and plane classiﬁcation, respectively, in percentage of the total number of internal nodes, and where the sample space was a bounding box 1.1 times the minimum axis-aligned bounding box. These numbers are pessimistic since typical sample spaces would be much larger than an object’s bounding box. Also, the heuristics are controlled by 4 parameters, and these numbers were generated, with some exceptions, without a search of the parameter space but rather using default parameters. There are also quite a number of ways to improve the conversion process, so it should be possible to do even better. Data Set Hang glider man Space shuttle Human head 1 Human head 2 Allosauros Lower Manhattan Berkeley CS Bldg. Dungeon Honda Accord West Point Terrain US Destroyer

# brep faces 189 575 927 2,566 4,072 4,532 9,129 14,061 26,033 29,400 45,802

# tree faces 406 1,006 1,095 5,180 9,725 5,510 9,874 20,328 51,730 9,208 91.928

faces ratio 2.14 1.75 1.21 2.01 2.38 1.22 1.08 1.44 1.98 0.31 2.00

# tree nodes 390 927 1,156 5,104 9,914 4,273 4,148 15,732 42,965 7,636 65,846

faces/nodes ratio 2.06 1.61 1.24 1.99 2.43 0.94 0.45 1.12 1.65 0.26 1.43

Point E[T] 1.7 1.2 1.4 0.2 NA 0.3 0.4 0.1 NA 0.1 NA

Line E[T] 3.4 2.5 4.4 0.8 NA 0.6 1.3 0.1 NA 0.3 NA

Plane E[T] 21.4 13.2 25.0 9.1 NA 10.5 14.6 1.7 NA 4.2 NA

Bibliography 1. Sandra H. Bloomberg, A Representation of Solid Objects for Performing Boolean Operations, U.N.C. Computer Science Technical Report 86-006 (1986). 2. W. Thibault and B. Naylor, Set Operations On Polyhedra Using Binary Space BSP Trees, Computer Graphics Vol. 21(4), pp. 153-162, (July 1987). 3. Bruce F. Naylor, John Amanatides and William C. Thibault, Merging BSP Trees Yields Polyhedral Set Operations, Computer Graphics Vol. 24(4), pp. 115-124, (August 1990).

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-17

4. Bruce F. Naylor, Binary Space BSP Trees as an Alternative Representation of Polytopes, Computer Aided Design, Vol. 22(4), (May 1990). 5. Bruce F. Naylor, SCULPT: an Interactive Solid Modeling Tool, Proceedings of Graphics Interface (May 1990). 6. Enric Torres, Optimization of the Binary Space Partition Algorithm (BSP) for the Visualization of Dynamic Scenes, Eurographics ’90 (Sept. 1990). 7. Insung Ihm and Bruce Naylor, Piecewise Linear Approximations of Curves with Applications, Proceedings of Computer Graphics International ’91, Springer-Verlag (June 1991). 8. George Vanecek, Brep-index: a multi-dimensional space partitioning tree, Proceedings of the ﬁrst ACM symposium on Solid modeling foundations and CAD/CAM applications, (May 1991). 9. Bruce F. Naylor, Interactive Solid Modeling Via BSP Trees, Proceeding of Graphics Interface, pp 11-18, (May 1992). 10. Y. Chrysanthou and M. Slater, Computing Dynamic Changes to BSP Trees, Eurographics ’92, 11(3), pp. 321-332. 11. Sigal Ar, Gil Montag, Ayellet Tal , Collision Detection and Augmented Reality: Deferred, Self-Organizing BSP Trees”, Computer Graphics Forum, Volume 21, Issue 3 (September 2002). 12. R. A. Schumacker, R. Brand, M. Gilliland, and W. Sharp, Study for Applying Computer-Generated Images to Visual Simulation, AFHRL-TR-69-14, U.S. Air Force Human Resources Laboratory (1969). 13. Ivan E. Sutherland, Polygon Sorting by Subdivision: a Solution to the HiddenSurface Problem, unpublished manuscript, (October 1973). 14. H. Fuchs, Z. Kedem, and B. Naylor, On Visible Surface Generation by a Priori Tree Structures, Computer Graphics Vol. 14(3), pp. 124-133, (June 1980). 15. Henry Fuchs, Gregory Abrams and Eric Grant, Near Real-Time Shaded Display of Rigid Objects, Computer Graphics Vol. 17(3), pp. 65-72, (July 1983). 16. Bruce F. Naylor and William C. Thibault, Application of BSP Trees to RayTracing and CSG Evaluation, Technical Report GIT-ICS 86/03, School of Information and Computer Science, Georgia Institute of Technology, Atlanta, Georgia 30332 (February 1986). 17. Norman Chin and Steve Feiner, Near Real-Time Shadow Generation Using BSP Trees, Computer Graphics Vol. 23(3), pp. 99-106, (July 1989). 18. A.T. Campbell and Donald S. Fussell, Adaptive Mesh Generation for Global Diﬀuse Illumination, Computer Graphics Vol. 24(4), pp. 155-164, (August 1990). 19. A.T. Campbell, Modeling Global Diﬀuse for Image Synthesis, Ph.D. Dissertation, Department of Computer Science, University of Texas at Austin, (1991). 20. Dan Gordon and Shuhong Chen, Front-to-Back Display of BSP Trees, IEEE Computer Graphics & Applications, pp. 79-85, (September 1991). 21. Norman Chin and Steve Feiner, Fast Object-Precision Shadow Generation for Area Light Sources Using BSP Trees, Symp. on 3D Interactive Graphics, (March 1992). 22. Bruce F. Naylor, BSP Tree Image Representation and Generation from 3D Geometric Models, Proceedings of Graphics Interface (May 1992). 23. Dani Lischinski, Filippo Tampieri and Donald Greenburg, Discountinuity Mesh-

© 2005 by Chapman & Hall/CRC

20-18

24. 25. 26.

27.

28.

29. 30. 31.

32.

33.

34. 35. 36. 37.

38. 39. 40. 41.

Handbook of Data Structures and Applications ing for Accurate Radiosity, IEEE Computer Graphics & Applications 12(6), pp. 25-39, (November 1992). Seth Teller and Pat Hanrahan, Global Visibility Algorithms for Illumination Computations, Computer Graphics Vol. 27, pp. 239-246, (August 1993). Yiorgos Chrysanthou, Shadow Computation for 3D Interaction and Animation, Ph.D. Thesis, Computer Science, University of London, (1996). Mel Slater and Yiorgos Chrysanthou, View volume culling using a probabilistic caching scheme, Proceedings of the ACM symposium on virtual reality software and technology, (Sept. 1997), pp. 71-77. Zhigeng Pan, Zhiliang Tao, Chiyi Cheng, Jiaoying Shi, A new BSP tree framework incorporating dynamic LoD models, Proceedings of the ACM symposium on Virtual reality software and technology (2000), pp. 134–141. Hayder Rahda, Riccardo Leonardi, Martin Vetterli and Bruce Naylor, Binary Space BSP Tree Representation of Images, Visual Communications and Image Representation, Vol. 2(3), pp. 201-221, (Sept. 1991). K.R. Subramanian and Bruce Naylor, Representing Medical images with BSP Trees, Proceeding of Visualization ’92, (Oct. 1992). Hayder M. Sadik Radha, Eﬃcient Image Representation Using Binary Space BSP Trees, Ph.D. dissertation, CU/CTR/TR 343-93-23, Columbia University, (1993). K.R. Subramanian and Bruce F. Naylor, Converting Discrete Images to Partitioning Trees, IEEE Transactions on Visualization & Computer Graphics, 3(3), 1997. Ajay Rajkumar, Farid Fesulin, Bruce Naylor and Lois Rogers, Prediction RF Coverage in Large Environments using Ray-Beam Tracing and Partitioning Tree Represented Geometry, ACM WINET, 2(2), (1996). Thomas Funkhouser, Ingrid Carlbom, Gary Elko, Gopal Pingali, Mohan Sondhi, Jim West, A beam tracing approach to acoustic modeling for interactive virtual environments, Siggraph ’98, (July 1998). Michael O. Rabin, Proving Simultaneous Positivity of Linear Forms, Journal of Computer and Systems Science, v6, pp. 639-650 (1991). E. M. Reingold, On the Optimality of some Set Operations, Journal of the ACM, Vol. 19, pp. 649-659 (1972). Bruce F. Naylor, A Priori Based Techniques for Determining Visibility Priority for 3-D Scenes, Ph.D. Thesis, University of Texas at Dallas (May 1981). M. S. Paterson and F. F. Yao, Eﬃcient Binary Space Partitions for HiddenSurface Removal and Solid Modeling, Discrete & Computational Geometry, v5, pp. 485-503, 1990. M. S. Paterson and F. F. Yao, Optimal Binary Space Partitions for Orthogonal Objects, Journal of Algorithms, v5, pp. 99-113, 1992. Bruce F. Naylor, Constructing Good BSP Trees, Graphics Interface ’93, Toronto CA, pp. 181-191, (May 1993). Mark de Berg, Marko M. de Groot and Mark Overmars, Perfect Binary Space Partitions, Canadian Conference on Computational Geometry, 1993. Pankaj K. Agarwal, Leonidas J. Guibas, T. M. Murali, Jeﬀrey Scott Vitter, Cylindrical and kinetic binary space partitions , Proceedings of the thirteenth annual symposium on Computational Geometry, (August 1997).

© 2005 by Chapman & Hall/CRC

Binary Space Partitioning Trees

20-19

42. Joao Comba, Kinetic Vertical Decomposition Trees , Ph.D. Thesis, Computer Science Department, Stanford University, (1999). 43. Mark de Berg, Joao Comba, Leonidas J. Guibas, A segment-tree based kinetic BSP, Proceedings of the seventeenth annual symposium on computational geometry, (June 2001). 44. Sunil Arya, Binary space partitions for axis-parallel line segments: size-height tradeoﬀs, Information Processing Letters, 84[4] (Nov. 2002), pp. 201-206. 45. Csaba D. T´oth, Binary Space Partitions for Line Segments with a Limited Number of Directions, SIAM J. on Computing, 32(2), 2003, pp. 307-325.

© 2005 by Chapman & Hall/CRC

21 R-trees

Scott Leutenegger

21.1 21.2 21.3

R* Tree

University of Denver

21.4

21.1

•

Hilbert Tree

•

21.5

21-1 21-2 21-5

Bulk Loading

Advanced Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-10 Nearest Neighbor Queries

Mario A. Lopez University of Denver

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Improving Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . •

Spatial Joins

Analytical Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-15

Introduction

Spatial database management systems must be able to store and process large amounts of disk-resident spatial data. Multidimensional data support is needed in many ﬁelds including geographic information systems (GIS), computer aided design (CAD), and medical, multimedia, and scientiﬁc databases. Spatial data operations that need to be supported include spatial joins and various types of queries such as intersection, containment, topological and proximity queries. The challenge, and primary performance objective, for applications dealing with disk-resident data is to minimize the number of disk retrievals, or I/Os, needed to answer a query. Main memory data structures are designed to reduce computation time rather than I/O, and hence are not directly applicable to a disk based environment. Just as the B-tree [13] (Chapter 15) and its variants were proposed to optimize I/O while processing single dimensional disk resident data, the original R-tree [23] and later variants have been proposed to index disk resident multidimensional data eﬃciently. R-trees are very versatile, in the sense that they can be used with little or no modiﬁcation to tackle many diﬀerent problems related to spatial data. Asymptotically better data structures exist for speciﬁc instances of these problems, but the solution of choice is diﬀerent for diﬀerent types of inputs or queries. Thus, one of the main advantages of R-trees is that the same data structure can be used to handle diﬀerent problems on arbitrary types of multidimensional data. In this chapter we describe the original R-tree proposal and some of its variants. We analyze the eﬃciency of various operations and examine various performance models. We also describe R-tree based algorithms for additional operations, such as proximity queries and spatial joins. There are many more applications, variants and issues related to R-trees than we can possibly cover in one chapter. Some of the ones we do not cover include parallel and distributed R-trees [9, 27, 46, 55], variants for high dimensional [5, 30, 67] and for spatiotemporal data [31, 48, 49, 53, 54, 62, 63], and concurrency [33, 41]. See Chapter 47 for more on concurrent data structures. Other data structures with similar functionality, such as

21-1

© 2005 by Chapman & Hall/CRC

21-2

Handbook of Data Structures and Applications

range, quad and k-d trees, are covered in other chapters of Part IV of this handbook. Some of these (see Chapter 27) are speciﬁcally designed for disk-resident data.

21.2

Basic Concepts

R-trees were ﬁrst introduced in [23]. An R-tree is a hierarchical data structure derived from the B+ -tree and originally designed to perform intersection queries eﬃciently. The tree stores a collection of d-dimensional points or rectangles which can change in time via insertions and deletions. Other object types, such as polygons or polyhedra, can be handled by storing their minimum bounding rectangles (MBRs) and performing additional tests to eliminate false hits. A false hit happens when the query object intersects the MBR of a data object but does not intersect the object itself. In the sequel we talk about rectangles only, with the understanding that a point is simply a degenerate rectangle. We use the terms MBR and bounding box, interchangeably. In our context, the d-dimensional rectangles are “upright”, i.e., each rectangle is the Cartesian product of d one-dimensional intervals: [l1 , h1 ] × . . . × [ld , hd ]. Thus, 2d values are used to specify a rectangle. Each node of the tree stores a maximum of B entries. With the exception of the root, each node also stores a minimum of b ≤ B/2 entries. This constraint guarantees a space utilization of at least b/B. Each entry E consists of a rectangle r and a pointer pr . As with B+ -trees all input values are stored at the leaves. Thus, at the leaf level, r is the bounding box of an actual object pointed to by pr . At internal nodes, r is the bounding box of all rectangles stored in the subtree pointed to by pr . A downward path in the tree corresponds to a sequence of nested rectangles. All leaf nodes occur at the same level (i.e., have the same depth), even after arbitrary sequences of updates. This guarantees that the height of the tree is O(logb n), where n is the number of input rectangles. Notice that MBRs at the same level may overlap, even if the input rectangles are disjoint. Figure 21.1 illustrates an R-tree with 3 levels (the root is at level 0) and a maximum of B = 4 rectangles per node. The 64 small dark data rectangles are grouped into 16 leaf level nodes, numbered 1 to 16. The bounding box of the set of rectangles stored at the same node is one of the rectangles stored at the parent of the node. In our example, the MBRs of leaf level nodes 1 through 4 are placed in node 17, in level 1. The root node contains the MBRs of the four level 1 nodes: 17, 18, 19, and 20. Intersection queries

To perform an intersection query Q, all rectangles that intersect the query region must be retrieved and examined (regardless of whether they are stored in an internal node or a leaf node). This retrieval is accomplished by using a simple recursive procedure that starts at the root node and which may follow multiple paths down the tree. In the worst case, all nodes may need to be retrieved, even though some of the input data need not be reported. A node is processed by ﬁrst identifying all the rectangles stored at that node which intersect Q. If the node is an internal node, the subtrees corresponding to the identiﬁed rectangles are searched recursively. Otherwise, the node is a leaf node and the retrieved rectangles (or the data objects themselves) are simply reported. For illustration, consider the query Q in the example of Figure 21.1. After examining the root node, we determine that nodes 19 and 20 of level 1 must be searched. The search then proceeds with each of these nodes. Since the query region does not intersect any of the MBRs stored in node 19, this sub-query is terminated. While processing the other subquery, it is determined that Q intersects the MBR corresponding to node 13 and this node

© 2005 by Chapman & Hall/CRC

R-trees

21-3

7 11

8

10

18

19

6

9

5 12

Q 13

17

14 2 15

4

20

3

16

1

root

17

1

2

18

3

4 5

6

19

7

8 9

10

11

20

12 13

14

15

16

FIGURE 21.1: A sample R-tree using B = 4. Input rectangles are shown solid.

is retrieved. Upon checking the rectangles in node 13, the one data rectangle intersected by Q is returned. Other type of queries, such as arbitrarily shaped queries (e.g., point or polygonal queries) or retrieving all rectangles contained or containing Q, can be handled using a straightforward modiﬁcation of the above procedure. Updating the tree

Many applications require support for update operations, such as insertion and deletion of rectangles. A tree that can change over time via such operations is said to be dynamic. New rectangles can be inserted using a procedure similar to that used to insert a new key in a B+ -tree. In other words, the new rectangle r is ﬁrst added to a leaf node v and, if the node overﬂows, a split is performed that requires updating one rectangle and inserting another one in the parent of v. This procedure continues until either a node with fewer

© 2005 by Chapman & Hall/CRC

21-4

Handbook of Data Structures and Applications

than B entries is found or the root is split, in which case a new node is created and the height of the tree grows by one. Independent of whether a split is performed or not, the bounding rectangles of all ancestors of r may need to be updated. One important diﬀerence between R-trees and B+ -trees is that, in our case, there is no incorrect leaf node to which the new rectangle can be added. Choosing a leaf node impacts performance, not correctness, and performance depends on our ability to cluster rectangles so as to minimize the expected number of rectangles intersected by a query of a given size. In practice this means that clustering should attempt to minimize the areas and perimeters of the resulting MBRs. Models for predicting the expected number of nodes that need to be visited while performing an intersection query are discussed in Section 21.5. The problem of partitioning a set of rectangles into buckets with capacity B > 2 such that the expected number of rectangles intersected by a random query is minimized is NP-hard [43]. Hence, it is unlikely we will ever know how to build optimal R-trees eﬃciently. As a result, many heuristic algorithms for building the tree have been proposed. It is worth noting that, in practice, some of the proposed heuristics result in well tuned R-trees and near optimal I/O for 2-dimensional data. We start with Guttman’s original heuristics, which are of two types: leaf selection and node splitting. To identify a leaf for insertion, Guttman proposes proceeding down the tree, always choosing the rectangle in the current node of the path whose area would increase by the smallest amount were we to insert the new rectangle in the subtree that corresponds to that rectangle. The reasoning behind this approach is that rectangles with small areas are less likely to be chosen for further exploration during a search procedure. When a node overﬂows, a split is performed. Ideally, when this happens, one would like to partition a set S of B + 1 rectangles into two sets S1 and S2 such that the sum of their areas is minimized and each set contains at least b entries. Guttman proposes three diﬀerent strategies, only the ﬁrst of which is guaranteed to yield an optimal partition. The ﬁrst strategy is a brute force algorithm that chooses the best split by checking all candidate partitions of the overﬂowed set S. This strategy is not practical, as the number of candidates is exponential in the node capacity, which can easily exceed 50 or so rectangles. The second strategy, quadratic split, starts by selecting the two rectangles r1 , r2 ∈ S which maximize the quantity area(r ) − area(r1 ) − area(r2 ), where r is the MBR of r1 ∪ r2 . These two rectangles act as seeds which are assigned to diﬀerent sides of the partition, i.e., one is assigned to S1 and the other to S2 . The remaining entries of S are then assigned to the set (S1 or S2 ) whose MBR area increases the least when including the new rectangle in that set. The entries are not considered in arbitrary order. Rather, the next entry to be allocated is the one with the strongest preference for a group, i.e., the entry r that maximizes |A1 − A2 |, where Ai = area(MBR(Si ∪ {r})) − area(MBR(Si )). This heuristic runs in quadratic time and attempts to assign a priority to the unallocated entries according to the performance penalty that the wrong assignment could cause. If at any time during the allocation procedure the size of the smaller set plus the number of unallocated entries is equal to b, then all remaining entries are allocated to that set. The third and ﬁnal strategy, linear split, also assigns entries to the group whose MBR area increases the least, but diﬀers from quadratic split in the method used to pick the seeds and in the order in which the remaining entries are allocated. The seeds are the two rectangles r1 and r2 whose separation is largest along (at least) one of the dimensions. We elaborate on this. Let lj (r) and hj (r) denote the low and high endpoints, respectively, of the j-th interval of r. The width of S along dimension j is simply wj = maxr {hj (r)} − minr {lj (r)}. The normalized separation of S along dimension j is sj = (maxr {lj (r)} − minr {hj (r)})/wj . The seeds r1 and r2 are the two rectangles that yield the largest normalized separation considering all dimensions j. Once the seeds are chosen, the remaining entries are allocated

© 2005 by Chapman & Hall/CRC

R-trees

21-5

to one set or the other in random order. This last heuristic runs in linear time. A diﬀerent linear split algorithm is described in [1]. Other eﬀorts [2, 19] include polynomial time algorithms to partition a set of rectangles so as to minimize the sum of areas of the two resulting bounding rectangles. In order to delete a rectangle r we ﬁrst ﬁnd the node v containing r and remove the entry, adjusting the bounding rectangles in all ancestors, as necessary. If the node occupancy goes below b the tree needs to be readjusted so as to keep the height in O(logb n). There are diﬀerent ways in which one can readjust the tree. One possibility is to redistribute the remaining entries of v among the siblings of v, in a manner similar to how underﬂowed nodes are treated in some B-tree algorithms. Instead, Guttman suggests reinserting the remaining entries of v, as this helps the global structure of the tree by considering nonsibling nodes during reinsertion. Of course, this procedure needs to be applied recursively, as internal nodes may underﬂow as well. Finally, if after deletion the root has exactly one child, the tree height shrinks by one and the only child becomes the new root.

21.3

Improving Performance

Since R-trees were ﬁrst proposed in [23], many variants and methods to improve the structure and performance of the tree have been proposed. We discuss a few of the more common ones: R∗ -trees [3], Hilbert R-trees [29] and several bulk loading algorithms [28, 36, 51]. Other proposals for improving performance include [15, 20, 56, 57].

21.3.1

R* Tree

Given that the known R-tree insertion algorithms are based on heuristic optimization, it is reasonable to assess their merit experimentally. Beckmann et al [3] conducted an extensive experimental study to explore the impact of alternative approaches for leaf selection and node splitting. Based on their experiments, they proposed the R* tree which has become the most commonly implemented R-tree variant. The R* tree diﬀers from the original Guttman R-tree in three ways. First, the leaf where a new object is inserted is chosen diﬀerently. The path selection algorithmmakes use of the concept of overlap of entry Ei in node vj , deﬁned as m overlap(Ei ) = j=1,j=i area(ri ∩ rj ), where m is the number of entries in node vj and ri is the rectangle associated with Ei . When descending from the root, if the next node to be selected is a leaf, the algorithm chooses the node that requires the least increase in overlap, and resolves ties as least area enlargement. If the next node is not a leaf, the entry with the least area enlargement is chosen. The second diﬀerence is the use of forced reinserts. The authors discovered that the initial order of inserts signiﬁcantly impacts tree quality. They also observed that query performance of an existing R-tree can be improved by removing half of the entries and then re-inserting them. Of course, the authors do not recommend performing a restructuring of this magnitude frequently. Rather, they used this insight to modify the policy for dealing with overﬂowed nodes. If an insertion causes an overﬂow, calculate the distance from the center of each of the B + 1 entries to the center of the MBR enclosing all B + 1 entries. Then sort the entries in decreasing order of this distance. Remove the p furthest entries, where p is set to 30% of B, and re-insert the p removed entries into the tree. Some subset of the p re-inserts may be inserted into nodes other than the initial node that overﬂowed. For each of the p re-inserts, if they do not cause an overﬂow, do nothing; otherwise, split the node using the algorithm below.

© 2005 by Chapman & Hall/CRC

21-6

Handbook of Data Structures and Applications

The third diﬀerence is in the node splitting algorithm. When a split is needed, the node entries are ﬁrst sorted twice along each of the d dimensions. The two sorts are based on the low and on the high MBR endpoint values, respectively. Remember that nodes must have a minimum of b and a maximum of B entries. Thus, using one of the sorted lists, the B + 1 entries can be partitioned into two groups, S1 and S2 , by splitting anyplace after the i-th entry, b ≤ i ≤ B−b+1, of the sorted list. S1 and S2 consist of the entries before and after the split position, respectively. In order to choose the best split, the following three objective functions were considered (for 2-d data) and tested using diﬀerent combinations: 1. area-value =area(MBR(S1 )) + area(MBR(S2 )) 2. perimeter-value = perimeter(MBR(S1 )) + perimeter(MBR(S2 )) 3. overlap-value = area(MBR(S1 ) ∩ MBR(S2 )) Notice that for a ﬁxed area, the MBR with smallest perimeter is the square. Based on experiments, the following split policy is adopted. The R* tree computes the perimeter-values for each possible grouping (S1 , S2 ) over both sorted lists of all dimensions and chooses the dimension that yields the minimum perimeter-value. Once the dimension has been chosen, the algorithm then chooses the grouping for that dimension that minimizes the overlap-value. These three changes were shown to substantially improve the I/O performance for all data sets studied.

21.3.2

Hilbert Tree

The Hilbert R-tree [29] further improves performance by imposing a linear order on the input rectangles that results in MBRs of small area and perimeter. The tree is actually an R-tree augmented with order information. Intersection queries are performed as before, using the standard R-tree algorithm; but as a consequence of the ordering constraints, insertion and deletion can proceed as in B+ -trees and there is no longer a need to consider various leaf selection heuristics. Additionally, the linear order allows for eﬀective use of deferred splitting, a technique which improves node utilization and performance as trees require fewer nodes for a given input set. To deﬁne an ordering of the input values, Kamel and Faloutsos [29] propose the use of a space-ﬁlling curve, such as the Hilbert curve. The power of these curve lies in its ability to linearly order multidimensional points such that nearby points in this order are also close in multidimensional space. Hilbert curves are not the only reasonable choice. Other curves, such as the Peano or Z-order curve, may also be used. See [52] for a discussion on space-ﬁlling curves. A d-dimensional Hilbert curve of order k is a curve Hkd that visits every vertex of a ﬁnite d dimensional grid of size 2k × . . . × 2k = 2kd . Its construction can best be viewed as a sequence of stages. At each stage, an instance of the curve of the previous stage is rotated and placed in each of 2d equal-sized sub-quadrants. Endpoints of the 2d sub-curves are then connected to produce the curve at the next stage. The ﬁrst three stages of the Hilbert curve for two and three dimensions are illustrated in Figures 21.2 and 21.3, respectively. Each grid vertex is assigned a Hilbert value, which is an integer that corresponds to its position along the curve. For instance, in H22 , (0, 0) and (1, 2) have Hilbert values 0 and 7, respectively. This assignment is easily extended to rectangles, in which case the Hilbert value of the grid point closest to the rectangle center is assigned. Algorithms for computing the position of a point along a space ﬁlling curve are given in [6, 10, 58]. The structure of the R-tree is modiﬁed as follows. Leaf nodes remain the same. Each entry

© 2005 by Chapman & Hall/CRC

R-trees

21-7

Stage 1: H12

Stage 2: H22

Stage 3: H32

FIGURE 21.2: The ﬁrst three stages of a 2-dimensional Hilbert curve.

Stage 1: H13

Stage 2: H23

Stage 3: H33

FIGURE 21.3: The ﬁrst three stages of a 3-dimensional Hilbert curve. of an internal node now has the form (r, p, v), where r and p have the same interpretation as before, and v is the largest Hilbert value of all data items stored in the subtree with root p. This assignment results in update algorithms that are similar to those used for B+ -trees. In particular, it is straightforward to implement an eﬀective policy for deferred splitting which reduces the number of splits needed while performing insertions. The authors propose the following policy, which they call s-to-(s + 1) splitting. When a node overﬂows, an attempt is ﬁrst made to shift entries laterally to s − 1 sibling nodes at the same level. An actual split occurs only if the additional entry cannot be accommodated by shifting, because the s − 1 siblings are already full. When this happens a new node is created and the sB + 1 entries are distributed among the s + 1 nodes. Because entries at the leaves are sorted by Hilbert value, bounding boxes of leaves tend to have small area and perimeter, and node utilization is high. Notice that there is a clear trade-oﬀ between node utilization and insertion complexity (which increases as s increases). The case s = 1 corresponds to the regular split policy used in the original R-tree, i.e., split whenever a node overﬂows. A sample tree with 5 data rectangles is shown in Figure 21.4. There are two leaf nodes and one internal node (the root). The pointer entries of the internal node are represented by arrows. Each input rectangle has been annotated with its Hilbert value. In reality, the corners of the rectangles would fall on grid vertices. They have been made smaller in order to make the ﬁgure more readable. Inserting a new rectangle whose center has Hilbert value 17 would cause an overﬂow in r. With deferred splitting, a split is not necessary. Instead, the new rectangle would be accommodated in r after shifting rectangle c (with Hilbert value 28) to its sibling s. The authors report improvements of up to 28% in performance over R∗ -trees and recommend using 2-to-3 splitting which results in an average node utilization of 82.2%.

© 2005 by Chapman & Hall/CRC

21-8

Handbook of Data Structures and Applications

s 51

e

d 39

r

b

c 28

9

a 2

(r, 28) (s, 51)

(a, pa ) (b, pb ) (c, pc )

(d, pd ) (e, pe )

FIGURE 21.4: A Hilbert R-tree with B = 3.

In practice, one does not store or compute all bit values on the hypothetical grid. Let β be the number of bits required to describe one coordinate. Storing the Hilbert value of a d-dimensional point requires dβ bits of storage, which may be larger than the size of native machine integers. It is possible to compare the Hilbert values of two points without storing the values explicitly. Conceptually, the process computes bit positions, one at a time, until discrimination is possible. Consider the case of 2-d and notice that the ﬁrst bit of the x- and y-coordinates of a point determine which quadrant contains it. Successive bits determine which successively smaller sub-quadrants contain the point. When two center points (x1 , y1 ) and (x2 , y2 ) need to be compared, the bits of each coordinate are examined until it can be determined that one of the points lies in a diﬀerent sub-quadrant than the other (one can use the sense and rotation tables described in [28] to accomplish this task). The information gathered is used to decide which point is closer to the origin (along the Hilbert Curve).

© 2005 by Chapman & Hall/CRC

R-trees

21.3.3

21-9

Bulk Loading

There are applications where the data is static, or does not change very frequently. Even if the data is dynamic, it may happen that an index needs to be constructed for a large data set which is available a priori. In these circumstances, building an R-tree by inserting one object at a time has several disadvantages: (a) high load time, (b) sub-optimal space utilization, and, most important, (c) poor R-tree structure requiring the retrieval of a large number of nodes in order to satisfy a query. As discussed in the previous section, other dynamic algorithms [3, 57] improve the quality of the R-tree, but still are not competitive with regard to query time when compared to loading algorithms that are allowed to preprocess the data to be stored. When done properly, preprocessing results in R-trees with nearly 100% space utilization and improved query times (due to the fact that fewer nodes need to be accessed while performing a query). Such packing algorithms were ﬁrst proposed by Roussopoulos [51] and later by Kamel and Faloutsos [28], and Leutenegger et al [36]. An approach that is intermediary between inserting a tuple at a time and constructing the entire tree by bulk loading is followed by [12], where an entire batch of input values is processed by partitioning the input into clusters and then inserting R-trees for the clusters into the existing R-tree. The general approach to bulk loading an R-tree is similar to building a B-tree from a collection of keys by creating the leaf level ﬁrst and then creating each successively higher level until the root node is created. The general approach is outlined below. General Algorithm: 1. Sort the n rectangles and partition them into n/B consecutive groups of B rectangles. Each group of B rectangles is eventually placed in the same leaf level node. Note that the last group may contain fewer than B rectangles. 2. Load the n/B groups of rectangles into nodes and output the (MBR, address) for each leaf level node into a temporary ﬁle. The addresses are used as the child pointer ﬁelds for the nodes of the next higher level. 3. Recursively pack these MBRs into nodes at the next level, proceeding upwards, until the root node is created. The three algorithms diﬀer only in how the rectangles are sorted at each level. These diﬀerences are described below. Nearest-X (NX):

This algorithm was proposed in [51]. The rectangles are sorted by the x-coordinate of a designated point such as the center. Once sorted, the rectangles are packed into nodes, in groups of size B, using this ordering. While our description is in terms of x, a diﬀerent coordinate can clearly be used. Hilbert Sort (HS):

The algorithm of [28] orders the rectangles using the Hilbert space ﬁlling curve. The center points of the rectangles are sorted based on their distance from the origin, measured along the curve. This process determines the order in which the rectangles are placed into the nodes of the R-Tree.

© 2005 by Chapman & Hall/CRC

21-10

Handbook of Data Structures and Applications 0.9

0.9

0.9

0.8

0.8

0.8

0.7

0.7

0.7

0.6

0.6

0.6

0.5

0.5

0.5

0.4

0.4

0.4

0.3

0.3

0.3

0.2

0.2

0.2

0.1

0.1

0.1

0

0 0

0.2

0.4

0.6

0.8

1

NX

0 0

0.2

0.4

Hilbert

0.6

0.8

1

0

0.2

0.4

0.6

0.8

1

STR

FIGURE 21.5: Leaf level nodes for three packing algorithms. Sort-Tile-Recursive (STR):

STR [36] is best described recursively with d = 2 providing the base case. (The case d = 1 is already handled well by regular B-trees.) Accordingly, we ﬁrst consider a set of rectangles in the plane. The basic idea is to “tile” the data space using n/B vertical slices so that each slice contains enough rectangles to pack roughly n/B nodes. Once again we assume coordinates are for the center points √ of the rectangles. Determine the number of leaf level pages P = n/B and let S = P . Sort the rectangles by x-coordinate and partition them into S vertical slices. A slice consists of a run of S · B consecutive rectangles from the sorted list. Note that the last slice may contain fewer than S · B rectangles. Now sort the rectangles of each slice by y-coordinate and pack them into nodes by grouping them into runs of length B (the ﬁrst B rectangles into the ﬁrst node, the next n into the second node, and so on). The case d > 2 is is a simple generalization of the approach described above. First, sort the hyper-rectangles according to the ﬁrst coordinate of their center. Then divide the input d−1 1 set into S = P d slabs, where a slab consists of a run of B · P d consecutive hyperrectangles from the sorted list. Each slab is now processed recursively using the remaining d − 1 coordinates (i.e., treated as a (d − 1)-dimensional data set). Figure 21.5 illustrates the results from packing a set of segments from a Tiger ﬁle corresponding to the city of Long Beach. The ﬁgure shows the resultant leaf level MBRs for the same data set for each of the three algorithms using a value of B = 100 to bulk load the trees. As reported in [36], both Hilbert and STR signiﬁcantly outperform NX packing on all types of data except point data, where STR and NX perform similarly. For tests conducted with both synthetic and actual data sets, STR outperformed Hilbert on all but one set, by factors of up to 40%. In one instance (VLSI data), Hilbert packing performed up to 10% faster. As expected, these diﬀerences decrease rapidly as the query size increases.

21.4

Advanced Operations

Even though R-trees were originally designed to perform intersections queries, it did not take long before R-trees were being used for other types of operations, such as nearest neighbor, both simple [11, 25, 50] and constrained to a range [18], reverse nearest neighbor [32, 61, 68], regular and bichromatic closest pairs [14, 24, 59], incremental nearest neighbors

© 2005 by Chapman & Hall/CRC

R-trees

21-11

[25], topological queries [44], spatial joins [7, 8, 21, 22, 37–40, 47] and distance joins[24, 60]. Some of the proposals work on an ordinary R-tree while others require that the tree be modiﬁed or augmented in various ways. Because of space limitations we concentrate our attention on two problems: nearest neighbors and spatial joins.

21.4.1

Nearest Neighbor Queries

We discuss the problem of ﬁnding the input object closest to an arbitrary query point Q. We assume the standard Euclidean metric, i.e., if a = (a1 , . . . , ad ) and b = (b1 , . . . , bd ) are d arbitrary points then dist(a, b) = ( i=1 (ai − bi )2 )1/2 . For a general object O, such as a rectangle or polygon, we deﬁne dist(Q, O) = minp∈O dist(Q, p).

R2 R1 R3

Q

FIGURE 21.6: Illustration of mindist (solid) and minmaxdist (dashed) for three rectangles. Notice that mindist(Q, R1 ) = 0 because Q ∈ R1 .

The ﬁrst proposal to solve this problem using R-trees is from [50]. Roussopoulos et al deﬁne two bounding functions of Q and an arbitrary rectangle r: mindist(Q, r) = dist(Q, r), the distance from Q to the closest point in r. minmaxdist(Q, r) = minf maxp∈f (dist(Q, p), where f ranges over all (d − 1)dimensional facets of r. Notice that mindist(Q, r) = 0 if Q is inside r and that for any object or rectangle s that is a descendant of r, mindist(Q, r) ≤ dist(Q, s) ≤ minmaxdist(Q, r). This last fact follows from the fact that each of the facets of r must share a point with at least one input object, but this object can be as far as possible within an incident face. Thus, the bounding functions serve as optimistic and pessimistic estimates of the distance from Q to the nearest object inside r. The following properties of the bounding functions readily follow: P1 For any object or MBR r and MBR s, if mindist(Q, r) > minmaxdist(Q, s) then r cannot be or contain the nearest neighbor of Q. P2 For any MBR r and object s, if mindist(Q, r) > dist(Q, s) then r cannot contain the nearest neighbor of Q.

© 2005 by Chapman & Hall/CRC

21-12

Handbook of Data Structures and Applications

The authors describe a branch-and-bound algorithm that performs a depth-ﬁrst traversal of the tree and keeps track of the best distance so far. The two properties above are used to identify and prune branches that are guaranteed not to contain the answer. For each call the algorithm keeps a list of active nodes, i.e., nodes that tentatively need to be explored in search of a better estimate. No node of the list is explored until the subtrees corresponding to nodes appearing earlier in the active list have been processed or pruned. Thus, a sorting policy to determine the order in which rectangles stored in a node are processed is also required. In practice one would like to examine ﬁrst those nodes that lower the best distance estimate as quickly as possible, but this order is diﬃcult to determine a priori. Two criteria considered include sorting by mindist and by minmaxdist. Experimental results suggest that sorting by mindist results in slightly better performance. The algorithm is summarized in Figure 21.7. Global variable bestDistance stores the estimate of the distance to the nearest neighbor. The initial call uses the query and root of the tree as arguments.

ﬁndNearestNeighbor(Q,v) if v is a leaf then foreach rectangle r in v do if dist(Q, r) < bestDistance then bestDistance ← dist(Q, r) else produce a list L of all entries (of the form (r, w)) in v sort L according to sorting criterion prune L using property P1 while L is not empty do retrieve and remove next entry (r, w) from L ﬁndNearestNeighbor(Q,w) prune L using property P2 end FIGURE 21.7: Nearest neighbor algorithm of [50].

A simple modiﬁcation to the above algorithm allows [50] to report the k > 1 nearest neighbors of Q. All is needed is to keep track of the best k distances encountered so far and to perform the pruning with respect to the k-th best. Cheung and Fu [11] show that pruning based on P1 is not necessary and do away with computing minmaxdist altogether. They simplify the algorithm by pruning with P2 exclusively, and by rearranging the code so that the pruning step occurs before, and not after, each recursive call. Hjaltason and Samet [24] also describe an algorithm that avoids using P1. Furthermore, unlike [50] which keeps a local list of active entries for each recursive call, their algorithm uses a global priority queue of active entries sorted by the optimistic distance from Q to that entry. This modiﬁcation minimizes the number of R-tree nodes retrieved and results in an incremental algorithm, i.e., one that reports answers in increasing order of distance, a desirable characteristic when the value of k is not known a priori.

© 2005 by Chapman & Hall/CRC

R-trees

21.4.2

21-13

Spatial Joins

We consider the problem of calculating the intersection of two sets R = {r1 , r2 , . . . , rn } and S = {s1 , s2 , . . . , sm } of spatial objects. The spatial join, R 67 S, is the set of all pairs (ri , sj ) such that ri ∩ sj = ∅. The join of two spatial data sets is a useful and common operation. Consider, for example, the rivers and roads of a region, both represented using line segments. The spatial join of the river and road data sets yields the set of likely bridge locations. If the subset of river segments whose level is above a given threshold has been previously selected, the same spatial join now computes likely locations for road ﬂooding. Methods to compute spatial joins without R-trees exist but are not covered in this chapter. We consider the case where R-trees have been constructed for one or both data sets and hence can be used to facilitate the join computation. Unless otherwise stated, we will assume that the ri ’s and sj ’s refer to the MBRs enclosing the actual data objects. In [8], Brinkhoﬀ et al proposed the “canonical” spatial join algorithm based on R-trees. A similar join algorithm was proposed at the same time by Gunther [21]. Gunther’s algorithm is applicable for general trees and includes R-trees as a special case. In Figure 21.8 we paraphrase the algorithm of [8]. Let v1 and v2 be nodes of R-trees T1 and T2 , respectively. Let Eij , be an entry of vi of the form (rij , pij ), where rij and pij denote the MBR and child pointer, respectively. To join data sets R and S, indexed by R-trees T1 and T2 , invoke the SpatialJoin algorithm in Figure 21.8, passing as arguments the roots of T1 and T2 .

SpatialJoin(v1 ,v2 ) foreach entry E1j ∈ v1 do foreach entry E2j ∈ v2 such that R1j ∩ R2j = ∅ do if v1 and v2 are leaf nodes then output entries E1j and E2j else Read the nodes pointed to by p1j and p2j SpatialJoin(p1j , p2j ) end FIGURE 21.8: Spatial join algorithm of [8] for two R-trees.

In [8] the authors generalize the algorithm for the case where the two R-trees have diﬀerent heights. They also improve upon the basic algorithm by reducing CPU computation and disk accesses. The CPU time is improved by reducing the number of rectangle intersection checks. One method to accomplish this is to ﬁrst calculate the subset of entries within nodes v1 and v2 that intersect MBR(v1 ) ∩ MBR(v2 ), and then do full intersection tests among this subset. A second approach is to sort the entries and then use a sweep-line algorithm. In addition, the paper considers reduction of page I/O by ordering the accesses to pages so as to improve the buﬀer hit ratio. This is done by accessing the data in sweep-line order or Z-order. In [7] Brinkhoﬀ et al suggest the following 3-step approach for joining complex polygonal data sets: (1) use the R-trees and MBRs of the data sets to reduce the set to a list of potential hits; (2) use a lightweight approximation algorithm to further reduce the set, leaving in some “false positives”; (3) conduct the exact intersection tests on the remaining polygons using techniques from computational geometry (see Chapter 2 of [16], for example).

© 2005 by Chapman & Hall/CRC

21-14

Handbook of Data Structures and Applications R4

R4 R4

R1

R1

R1

R2

R2

R3

(a)

R3

(b)

R2

R3

(c)

FIGURE 21.9: Seeded Tree Example. (a) Existing R-tree and non-indexed data (dark squares); (b) Normal R-tree structure for non-indexed data; (c) Seeded structure.

Often only one of the data sets to be joined will be indexed by an R-tree. This is the case when the DBA decides that maintaining an index is too expensive, when the data set being joined is the result of a series of non-spatial attribute selections, or for multi-step joins where intermediate results are not indexed. To join two data sets when only one is indexed by an R-tree, Lo and Ravishankar [37] propose the idea of seeded tree join. The main idea is to use the existing R-tree to “seed” the creation of a new index, called the seeded tree, for the non-indexed data set, and then perform a join using the method of [8]. Consider the example shown in Figure 21.9 (similar to the example in [37]). Assume that the existing tree has four entries in the root node. The four rectangles, R1 to R4, in the left hand side represent the bounding rectangles of these entries. The dark ﬁlled squares do not belong to the existing R-tree but, rather, correspond to some of the data items in the non-indexed data set. Assuming a node capacity of four (i.e., B = 4) and using the normal insertion or loading algorithms which minimize area and perimeter, the dark rectangles would likely be grouped as shown by the dark MBRs in Figure 21.9b. A spatial join would then require that each node of each tree be joined with two nodes from the other tree, for a total of eight pairs. On the other hand, if the second R-tree was structured as show in Figure 21.9c, then each node would be joined with only one node from the other tree, for a total of four pairs. Hence, when performing a spatial join, it might be better to structure the top levels of the tree in a fashion that is sub-optimal for general window queries. The general algorithm for seeded tree creation is to copy the top few levels of the existing tree and use them as the top levels for the new tree. These top levels are called the seed levels. The entries at the lowest seed level are called “slots”. Non-indexed data items are then inserted into the seeded tree by inserting them into an R-tree that is built under the appropriate slot. In [37] the authors experimentally compare three join algorithms: (1) R-tree join, where an R-tree is ﬁst built on the non-indexed data set and then joined; (2) brute force, where the non-indexed data set is read sequentially and a region query is run against the existing R-tree for each data item in the non-indexed data set; (3) seeded tree join, where a seeded tree is built and then joined. The authors consider several variants of the seeded tree creation algorithm and compare the performance. Experimental studies show that the seeded tree method signiﬁcantly reduces I/O. Note that if the entire seeded tree does not ﬁt in memory signiﬁcant I/O can occur during the building process. The authors propose to minimize this I/O by buﬀering runs for the slots and then building the

© 2005 by Chapman & Hall/CRC

R-trees

21-15

tree for each slot during a second pass. Another approach [22] for the one-index case is to sort the non-indexed data using the MBR lower endpoints for one of the dimensions, sort the leaf level MBRs from the existing R-tree on the same dimension, and ﬁnally join the two sorted data sets using a sweep-line algorithm. The authors analytically demonstrate that as long as the buﬀer size is suﬃcient to merge-sort eﬃciently, their algorithm results in less I/O than creating any type of index followed by a join. Experimental results also show a signiﬁcant I/O reduction. In [47] a relational hash-based join approach is used. Although mostly hash-based, the method does need to default to R-trees in some cases. A sampled subset of R is partitioned into N buckets, R1 . . . RN , for some N . Each non-sampled object from R is then added to the bucket that requires the least enlargement. Set S is then partitioned in N corresponding buckets, S1 . . . SN by testing each object oS of S and placing a copy of it into Si , for each bucket Ri such that oS ∩ Ri = ∅. If an object in S does not intersect any of the Ri buckets the object is discarded. The bucket pairs (Ri , Si ) are then read into memory and pairwise joined. If a bucket pair is too large to ﬁt in memory, an R-tree index is built for one of the two buckets and an index-loop join is used. In [38, 40] a method that combines the seeded tree and the hash-join approach is proposed. The proposed method, slot index spatial join, chooses a level from the existing tree and uses the MBRs of the entries as the buckets for the hashing. The chosen level is determined by the number of entries at that level and the number of buﬀer pages available for the bucket joining algorithm. Since R-trees have a wide fan out, the optimal number of buckets to use usually falls between level sizes. The paper considers several heuristics for combining MBRs from the next level down to tune the number of buckets. Overall performance is shown to be better than all previously existing methods in all but a few cases. A method to join multiple spatial relations together is discussed in [38, 39]. The authors propose a multi-way join algorithm called synchronous traversal and develop cost models to use for query optimization. They consider using only pairwise joins, only the synchronous traversal method, and combinations of the two approaches. They show that, in general, a combination of the two results in the best performance. The concept of spatial join has been further generalized to distance joins, where a distance based ordering of a subset of the Cartesian product of the two sets is returned. In [24, 60], distance join algorithms using R-trees are proposed.

21.5

Analytical Models

Analytical models of R-trees provide performance estimates based on the assumptions of the model. Such models can be useful for gaining insight, comparing algorithms, and for query optimization. Early analytical models for range queries were proposed by Kamel and Faloutsos [28], and Pagel et al [42]. The models are similar and use the MBRs of all nodes in the tree as inputs to the model. They derive the probability that Q intersects a given MBR, and use this estimate to compute the expected number of MBRs intersected by Q. In [4, 34] the basic model was modiﬁed to correct for an error that may arise for MBRs near the boundary of the query sample space. In order to do this, [34] assumes that all queries fall completely within the data space. The changes necessary to handle diﬀerent sample spaces are straightforward. The models provide good insight into the problem, especially by establishing a quantitative relationship between performance and the total area and perimeter of MBRs of the tree nodes. We describe the model as presented in [34].

© 2005 by Chapman & Hall/CRC

21-16

Handbook of Data Structures and Applications

Consider a 2-dimensional data set consisting of rectangles to be stored in an R-tree T with h + 1 levels, labeled 0 through h. Assume all input rectangles have been normalized to ﬁt within the unit square U = [0, 1] × [0, 1]. Queries are rectangles Q of size qx × qy . (A point query corresponds to the case qx = qy = 0.) Initially assume that queries are uniformly distributed over the unit square. Although this description concentrates on 2-d, generalizations to higher dimensions are straightforward. Assume the following notation: mi m Rij

= number of nodes at the ith level of T h = Total number nodes in T , i.e., i=0 mi = jth rectangle at the ith level of T

Xij Yij

= x-extent (width) of Rij = y-extent (height) of Rij

Aij

= area of Rij , i.e., Aij = Xij · Yij

AQ ij

= probability that Rij is accessed by query Q

Bij

= number of accesses to Rij

A Lx

= Sum of the areas of all MBRs in T = Sum of the x-extents of all MBRs in T

Ly N

= Sum of the y-extents of all MBRs in T = number of queries performed so far

N∗

=

β D(N ) ETP (qx , qy )

expected number of queries required to ﬁll the buﬀer

= buﬀer size = number of distinct nodes (at all levels) accessed in N queries = expected number of nodes (buﬀer resident or not) of T accessed while performing a query of size qx × qy

ETD (qx , qy )

= expected number of disk accesses while performing a query of size qx × qy

The authors of [28, 42] assume that performance is measured by the number of nodes accessed (independent of buﬀering). They observe that for uniform point queries the probability of accessing Rij is just the area of Rij , namely, Aij . They point out that the level of T in which Rij resides is immaterial as all rectangles containing Q (and only those) need to be retrieved. Accordingly, for a point query, the expected number of nodes retrieved as derived in [28] is the sum of node areas∗:

∗ We

have modiﬁed the notation of [28] to make it consistent with the notation used here.

© 2005 by Chapman & Hall/CRC

R-trees

21-17

qx

Q

Qtr

qy

qy

qx

(a)

(b)

FIGURE 21.10: (a) Two data rectangles and region query Q (b) Corresponding extended rectangles and equivalent point query Qtr .

ETP (0, 0) =

mi h

Aij = A

(21.1)

i=0 j=1

which is the sum of the areas of all rectangles (both leaf level MBRs as well as MBRs of internal nodes). We now turn our attention to region queries. Let !(a, b), (c, d)" denote an axis-parallel rectangle with bottom left and top right corners (a, b) and (c, d), respectively. Consider a rectangular query Q = !Qbl , Qtr " of size qx ×qy . Q intersects R = !(a, b), (c, d)" if and only if Qtr (the top right corner of Q) is inside the extended rectangle R = !(a, b), (c + qx , d + qy )", as illustrated in Figure 21.10. Kamel and Faloutsos infer that the probability of accessing R while performing Q is the area of R , as the region query Q is equivalent to a point query Qtr where all rectangles in T have been extended as outlined above. Thus, the expected number of nodes retrieved (as derived in [28]) is: ETP (qx , qy )

=

mi h

(Xij + qx )(Yij + qy )

i=0 j=1

=

mi h i=0 j=1

=

(Xij Yij + qx

mi h i=0 j=1

A + qx Ly + qy Lx + mqx qy

Yij + qy

mi h

Xij + mqx qy

i=0 j=1

(21.2)

Equation 21.2 illustrates the fact that a good insertion/loading algorithm should cluster rectangles so as to minimize both the total area and total perimeter of the MBRs of all nodes. For point queries, on the other hand, qx = qy = 0, and minimizing the total area is enough. In [34] the model of [28] was modiﬁed to handle query windows that fall partially outside the data space as well as data rectangles close to the boundary of the data space, as suggested by Six et al [42]. Speciﬁcally:

© 2005 by Chapman & Hall/CRC

21-18

Handbook of Data Structures and Applications

U 0.3

0.8

R1 Q1 (a)

(b)

FIGURE 21.11: The domain of Qtr for a query of size 0.3 × 0.3 is U (area not shaded). 1. For uniformly distributed rectangular queries of size qx × qy the top right corner of the query region Q, cannot be an arbitrary point inside the unit square if the entire query region is to ﬁt within the unit square. For example, if qx = qy = 0.3, a query such as Q1 in Figure 21.11a should not be allowed. Rather, Qtr must be inside the box U = [qx , 1] × [qy , 1]. 2. The probability of accessing a rectangle R = !(a, b), (c, d)" is not always the area of R = !(a, b), (c + qx , d + qy )" as this value can be bigger than one. For example, in Figure 21.11b, the probability that a query of size 0.8 × 0.8 accesses rectangle R1 should not be 1.1 · 1.1 = 1.21, which is the area of the extended rectangle R1 , obtained by applying the original formula. Rather, the access probability is the percentage of U covered by the rectangle R ∩ U . Thus, we change the probability of accessing rectangle i of level j to: AQ i,j

= =

area(R ∩ U ) area(U ) C ·D (1 − qx )(1 − qy )

(21.3)

where C = [min(1, c + qx ) − max(a, qx )] and D = [min(1, d + qy ) − max(b, qy )]. In [35] the R-tree model was expanded to take into account the distribution of the input data. Speciﬁcally, rather than being uniformly distributed, the query regions were assumed to be distributed according to the input data distribution.

© 2005 by Chapman & Hall/CRC

R-trees

21-19

The above models do not consider the impact of the buﬀer. In [35] a buﬀer model is integrated with the query model. Speciﬁcally, under uniformly distributed point queries, the probability of accessing rectangle Rij while performing a query is Aij . Accordingly, the probability that Rij is not accessed during the next N queries is P [Bij = 0|N ] = (1−Aij )N . Thus, P [Bij ≥ 1|N ] = 1 − (1 − Aij )N and the expected number of distinct nodes accessed in N queries is, D(N ) =

mi h

P [Bij ≥ 1|N ] = m −

mi h

i=0 j=1

(1 − Aij )N

(21.4)

i=0 j=1

Note that D(0) = 0 < β and D(1) = A (which may or may not be bigger than β). The buﬀer, which is initially empty, ﬁrst becomes full after performing N ∗ queries, where N ∗ is the smallest integer that satisﬁes D(N ∗ ) ≥ β. The value of N ∗ can be determined by a simple binary search. While the buﬀer is not full the probability that Rij is in the buﬀer is equal to P [Bij ≥ 1]. The probability that a random query requires a disk access for Rij is Aij · P [Bij = 0]. Since the steady state buﬀer hit probability is approximately the same as the buﬀer hit probability after N ∗ queries, the expected number of disk accesses for a point query at steady state is mi h

∗

Aij · P [Bij = 0|N ] =

i=0 j=1

mi h

Aij · (1 − Aij )N

∗

(21.5)

i=0 j=1

The above derivation also holds for region queries provided that AQ ij is used instead of Aij , i.e.: ETD (qx , qy ) =

mi h

Q N AQ ij · (1 − Aij )

∗

i=0 j=1

In [34] the authors compare the model to simulation and explore the I/O impact of pinning the top levels of an R-tree into the buﬀer. Other analytical models include the following. Theodoridis and Sellis [65] provide a fully analytical model that does not require the R-tree MBRs as input. In [17], a technique is developed for analyzing R-tree performance with skewed data distributions. The technique uses the concept of fractal dimension to characterize the data set and resultant R-tree performance. Analysis has also been used for estimating the performance of R-tree based spatial joins [26, 66] and nearest neighbor queries [45, 64].

Acknowledgment This work was supported in part by the National Science Foundation under Grants IRI9610240 and DMS-0107628.

References [1] C.H. Ang and T.C. Tan. New linear node splitting algorithm for R-trees. In Advances in Spatial Databases, 5th International Symposium (SSD), volume 1262 of Lecture Notes in Computer Science, pages 339–349. Springer, 1997. [2] B. Becker, P. G. Franciosa, S. Gschwind, S. Leonardi, T. Ohler, and P. Widmayer. Enclosing a set of objects by two minimum area rectangles. Journal of Algorithms, 21(3):520–541, 1996.

© 2005 by Chapman & Hall/CRC

21-20

Handbook of Data Structures and Applications

[3] N. Beckmann, H.P. Kriegel, R. Schneider, and B. Seeger. The R -tree: an eﬃcient and robust access method for points and rectangles. In Proc. ACM SIGMOD, pages 323–331, may 1990. [4] S. Berchtold, C. Bohm, and H.-P. Kriegel. Improving the query performance of highdimensional index structures by bulk-load operations. In Proc. 6th International Conference on Extending Database Technology, pages 216–230, 1998. [5] S. Berchtold, D. Keim, and H.-P. Kriegel. The X-tree: An index structure for highdimensional data. In Proc. 22nd International Conference on Very Large Databases (VLDB), pages 28–39, 1996. [6] T. Bially. Space-ﬁlling curves: their generation and their application to bandwidth reduction. IEEE Transactions on Information Theory, IT-15(6):658–664, 1969. [7] T. Brinkhoﬀ, H.-P. Kriegel, R. Schneider, and B. Seeger. Multi-step processing of spatial joins. In Proc. ACM SIGMOD, pages 197–208, 1994. [8] T. Brinkhoﬀ, H.-P. Kriegel, and B. Seeger. Eﬃcient processing of spatial joins using R-trees. In Proc. ACM SIGMOD, pages 237–246, 1993. [9] T. Brinkhoﬀ, H.-P. Kriegel, and B. Seeger. Parallel processing of spatial joins using R-trees. In Proc. 12th International Conference on Data Engineering (ICDE), pages 258–265, 1996. [10] A.R. Butz. Alternative algorithm for Hilbert’s space-ﬁlling curve. IEEE Transactions on Computers, C-20:424–426, 1971. [11] K. L. Cheung and A. W.-C. Fu. Enhanced nearest neighbour search on the R-tree. SIGMOD Record, 27(3):16–21, 1998. [12] R. Choubey, L. Chen, and E.A. Rundensteiner. GBI: A generalized R-tree bulk-insertion strategy. In Symposium on Large Spatial Databases, pages 91–108, 1999. [13] D. Comer. The ubiquitous B-tree. ACM Computing Surveys, 11(2):121–137, 1979. [14] A. Corral, Y. Manolopoulos, Y. Theodoridis, and M. Vassilakopoulos. Closest pair queries in spatial databases. In Proc. ACM SIGMOD, pages 189–200, 2000. [15] M. de Berg, J. Gudmundsson, M. Hammar, and M. Overmars. On R-trees with low query complexity. Computational geometry: Theory of Applications, 24(3):179–195, 2003. [16] M. de Berg, M. van Kreveld, M. Overmars, and O. Schwarzkopf. Computational Geometry: Algorithms and Applications. Springer-Verlag, 2nd edition, 2000. [17] C. Faloutsos and I. Kamel. Beyond uniformity and independence: Analysis of R-trees using the concept of fractal dimension. In Proc. ACM Symposium on Principles of Database Systems (PODS), pages 4–13, 1994. [18] H. Ferhatosmanoglu, I. Stanoi, D. Agrawal, and A. El Abbadi. Constrained nearest neighbor queries. Lecture Notes in Computer Science, 2121:257–278, 2001. [19] Y. Garcia, M.A. Lopez, and S.T. Leutenegger. On optimal node splitting for R-trees. In Proc. International Conference on Very Large Databases (VLDB), pages 334–344, August 1998. [20] Y. Garcia, M.A. Lopez, and S.T. Leutenegger. Post-optimization and incremental reﬁnement of R-trees. In Proc. 7th International Symposium on Advances in Geographic Information Systems (ACM GIS), pages 91–96. ACM, 1999. [21] O. Gunther. Eﬃcient computation of spatial joins. In Proc. International Conference on Data Engineering (ICDE), pages 50–59, 1993. [22] C. Gurret and P. Rigaux. The sort/sweep algorithm: A new method for R-tree based spatial joins. In Proc. SSDBM, pages 153–165, 2002. [23] A. Guttman. R-trees: a dynamic index structure for spatial searching. In Proc. ACM SIGMOD, pages 47–57, June 1984. [24] G.R. Hjaltason and H. Samet. Incremental distance join algorithms for spatial databases. In Proc. ACM SIGMOD, pages 237–248, 1998.

© 2005 by Chapman & Hall/CRC

R-trees

21-21

[25] G.R. Hjaltason and H. Samet. Distance browsing in spatial databases. ACM Transactions on Database Systems, 24(2):265–318, 1999. [26] Y.-W. Huang, N. Jing, and E. A. Rundensteiner. A cost model for estimating the performance of spatial joins using R-trees. In Statistical and Scientiﬁc Database Management, pages 30–38, 1997. [27] I. Kamel and C. Faloutsos. Parallel R-trees. In Proc. ACM SIGMOD, pages 195–204, 1992. [28] I. Kamel and C. Faloutsos. On packing R-trees. In Proc. 2nd International Conference on Information and Knowledge Management (CIKM), November 1993. [29] I. Kamel and C. Faloutsos. Hilbert R-tree: an improved R-tree using fractals. In Proc. International Conference on Very Large Databases (VLDB), pages 500–509, September 1994. [30] N. Katayama and S. Satoh. The SR-tree: An index structure for high-dimensional nearest neighbor queries. In Proc. ACM SIGMOD, pages 369–380, 1997. [31] G. Kollios, V.J. Tsotras, D. Gunopulos, A. Delis, and M. Hadjieleftheriou. Indexing animated objects using spatiotemporal access methods. IEEE Transactions on Knowledge and Data Engineering, 13(5):758–777, 2001. [32] F. Korn and S. Muthukrishnan. Inﬂuence sets based on reverse nearest neighbor queries. In Proc. ACM SIGMOD, pages 201–212, 2000. [33] M. Kornacker and D. Banks. High-concurrency locking in R-trees. In Proc. International Conference on Very Large DataBases (VLDB), pages 134–145, 1995. [34] S.T. Leutenegger and M.A. Lopez. The eﬀect of buﬀering on the performance of R-trees. In Proc. 15th International Conference on Data Engineering (ICDE), pages 164–171, 1998. [35] S.T. Leutenegger and M.A. Lopez. The eﬀect of buﬀering on the performance of R-trees. IEEE Transactions on Knowledge and Data Engineering, 12(1):33–44, 2000. [36] S.T. Leutenegger, M.A. Lopez, and J.M. Edgington. STR: A simple and eﬃcient algorithm for R-tree packing. In Proc. 14th International Conference on Data Engineering (ICDE), pages 497–506, 1997. [37] M-L. Lo and C.V. Ravishankar. Spatial joins using seeded trees. In Proc. ACM SIGMOD, pages 209–220, 1994. [38] N. Mamoulis and D. Papadias. Integration of spatial join algorithms for processing multiple inputs. In Proc. ACM SIGMOD, 1999. [39] N. Mamoulis and D. Papadias. Multiway spatial joins. ACM Transactions on Database systems, 26(4):424–475, 2001. [40] N. Mamoulis and D. Papadias. Slot index spatial join. IEEE Transactions on Knowledge and Data Engineering, 15(1):1–21, 2003. [41] V. Ng and T. Kameda. Concurrent access to R-trees. In Proc. SSD, pages 142–161, 1993. [42] B-U. Pagel, H-W. Six, H. Toben, and P. Widmayer. Towards an analysis of range query performance in spatial data structures. In Proc. ACM Symposium on Principles of Database Systems (PODS), pages 214–221, May 1993. [43] B.-U. Pagel, H.-W. Six, and M. Winter. Window query-optimal clustering of spatial objects. In Proc. 14th ACM Symposium on Principles of Database Systems (PODS), pages 86– 94, 1995. [44] D. Papadias, T. Sellis, Y. Theodoridis, and M. Egenhofer. Topological relations in the world of minimum bounding rectangles: a study with R-trees. In Proc. ACM SIGMOD, pages 92–103, 1995. [45] A. Papadopoulos and Y. Manolopoulos. Performance of nearest neighbor queries in R-trees. In Proc. 6th International Conference on Database Theory, pages 394–408, 1997. [46] A. Papadopoulos and Y. Manolopoulos. Similarity query processing using disk arrays. In

© 2005 by Chapman & Hall/CRC

21-22

Handbook of Data Structures and Applications

Proc. ACM SIGMOD, pages 225–236, 1998. parallel NN using R-trees. [47] J.M. Patel and D.J. DeWitt. Partition based spatial-merge join. In Proc. ACM SIGMOD, 1996. [48] D. Pfoser, C.S. Jensen, and Y. Theodoridis. Novel approaches in query processing for moving object trajectories. In Proc. 26th International Conference on Very Large Databases (VLDB), pages 395–406, 2000. [49] C.M. Procopiuc, P.K. Agarwal, and S. Har-Peled. Star-tree: An eﬃcient self-adjusting index for moving objects. In Proc. 4th Workshop on Algorithm Engineering and Experiments (ALENEX), pages 178–193, 2002. [50] N. Roussopoulos, S. Kelley, and F. Vincent. Nearest neighbor queries. In Proc. ACM SIGMOD, pages 71–79, May 1995. [51] N. Roussopoulos and D. Leifker. Direct spatial search on pictorial databases using packed R-trees. In Proc. ACM SIGMOD, pages 17–31, Austin, Texas, May 1985. [52] H. Sagan. Space-ﬁlling curves. Springer-Verlag, 1994. [53] S. Saltenis and C. Jensen. Indexing of now-relative spatio-bitemporal data. The VLDB Journal, 11(1):1–16, 2002. [54] S. Saltenis, C. Jensen, S. Leutenegger, and M.A. Lopez. Indexing the positions of continuously moving points. In Proc. ACM SIGMOD, pages 331–342, May 2000. [55] B. Schnitzer and S.T. Leutenegger. Master-client R-trees: A new parallel R-tree architecture. In Proc. Conference of Scientiﬁc and Statistical Database Systems (SSDBM), pages 68–77, 1999. [56] T. Schreck and Z. Chen. Branch grafting method for R-tree implementation. Journal of Systems and Software, 53:83–93, 2000. [57] T. Sellis, N. Roussopoulos, and C. Faloutsos. The R+ tree: A dynamic index for multidimensional objects. In Proc. 13th International Conference on Very Large Databases (VLDB), pages 507–518, September 1987. [58] K. Sevcik and N. Koudas. Filter trees for managing spatial data over a range of size granularities. Technical Report CSRI-TR-333, Computer Systems Research Institute, University of Toronto, October 1995. [59] J. Shan, D. Zhang, and B. Salzberg. On spatia-range closest-pair queries. In Proc. 8th International Symposium on Spatial and Temporal Databases (SSTD), pages 252–269, 2003. [60] H. Shin, B. Moon, and S. Lee. Adaptive multi-stage distance join processing. In Proc. ACM SIGMOD, pages 343–354, 2000. [61] I. Stanoi, D. Agrawal, and A. El Abbadi. Reverse nearest neighbor queries for dynamic databases. In ACM SIGMOD Workshop on Research Issues in Data Mining and Knowledge Discovery, pages 44–53, 2000. [62] Y. Tao and D. Papadias. MV3R-tree: A spatio-temporal access method for timestamp and interval queries. In Proc. 27th International Conference on Very Large Databases (VLDB), pages 431–440, 2001. [63] Y. Tao, D. Papadias, and J. Sun. The TPR∗ -tree: An optimized spatio-temporal access method for predictive queries. In Proc. International Conference on Very Large Databases (VLDB), pages 790–801, 2003. [64] Y. Tao, J. Zhang, D. Papadias, and N. Mamoulis. An eﬃcient cost model for optimization of nearest neighbor search in low and medium dimensional spaces. IEEE Transactions on Knowledge and Data Engineering, to appear. [65] Y. Theodoridis and T. Sellis. A model for the prediction of R-tree performance. In Proc. 8th ACM Symposium on Principles of Database Systems (PODS), May 1996. [66] Y. Theodoridis, E. Stefanakis, and T. K. Sellis. Eﬃcient cost models for spatial queries using R-trees. IEEE Transactions Knowledge and Data Engineering, 12(1):19–32, 2000.

© 2005 by Chapman & Hall/CRC

R-trees

21-23

[67] D. White and R. Jain. Similarity indexing: algorithms and performance. In Proc. SPIE Storage and Retrieval for Still Image and Video Databases IV, volume 2670, pages 62–73, 1996. [68] C. Yang and K.-I. Lin. An index structure for eﬃcient reverse nearest neighbor queries. In Proc. International Conference on Data Engineering (ICDE), pages 485–492, 2001.

© 2005 by Chapman & Hall/CRC

22 Managing Spatio-Temporal Data 22.1 22.2

Introduction and Background . . . . . . . . . . . . . . . . . . . . Overlapping Linear Quadtree . . . . . . . . . . . . . . . . . . . . .

22-1 22-2

Insertion of an Object in MVLQ • Deletion of an Object in MVLQ • Updating an Object in MVLQ

22.3

3D R-tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22-6

Answering Spatio-Temporal Queries Using the Uniﬁed Schema • Performance Analysis of 3D R-trees • Handling Queries with Open Transaction-Times

S. S. Iyengar

2+3 R-tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HR-tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MV3R-tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indexing Structures for Continuously Moving Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Louisiana State University

TPR-tree

Sumeet Dua Louisiana Tech University

22.1

22.4 22.5 22.6 22.7

•

REXP -tree

•

STAR-tree

•

22-11 22-12 22-13 22-15

TPR*-tree

Introduction and Background

Space and time are indispensable for many objects in the real world. Spatial databases represent, store and manipulate spatial data such as points, lines, areas, surfaces and hypervolumes in multidimensional space. Most of these databases suﬀer from, what is commonly called, the “Curse of Dimensionality” [1]. Curse of dimensionality refers to a performance degradation of similarity queries with increasing dimensionality of these databases. One way to reduce this curse is to develop data structures for indexing such databases to answer similarity queries eﬃciently. Specialized data structures such as R-trees and its variants (Chapter 21), have been proposed for this purpose which have demonstrated multi-fold performance gains in access time on this data over sequential search. Temporal databases, on the other hand, store time-variant data. Traditional spatial data structures can store only one ‘copy’ of the data, latest at the ‘present time’, while we frequently encounter applications where we need to store more than one copy of the data. While spatial data structures typically handle objects having spatial components and temporal data structures handle time-variant objects, research in Spatio-temporal data structures and data models have concentrated around storing moving points and moving objects, or objects with geometries changing over time. Some examples of domains generating spatio-temporal data include but are not limited to the following: geographical information systems, urban planning systems, communication systems, multimedia systems and traﬃc planning systems. While the assemblage of spatio-temporal data is growing, the development of eﬃcient data structures for storage and retrieval of these data types hasn’t kept pace with this increase. Research in spatio-temporal data abstraction is strewn but there are some important research results in this area that

22-1

© 2005 by Chapman & Hall/CRC

22-2

Handbook of Data Structures and Applications

have laid elemental foundation for development of novel structures for these data types. In this chapter we will present an assortment of key modeling strategies for Spatio-temporal data types. In Spatio-temporal databases (STB), two concepts of times are usually considered: transaction and valid time. According to [2], transaction time is the time during which a piece of data is recorded in a relation and may be retrieved. Valid time is a time during which a fact is true in the modeled reality. The valid time can be in the future or in the past. There are two major directions [3] in the development of spatio-temporal data structures. The ﬁrst direction is space-driven structures, which have indexing based upon the partitioning of the embedding multi-dimensional space into cells, independent of the distribution of the data in this space. An example of such a space-driven data structure is multiversion linear quadtree for storing spatio-temporal data. The other direction for storing spatio-temporal data is data-driven structures. These structures partition the set of the data objects, rather than the embedding space. Examples of data-driven structures include those based upon R-trees and its variants. In this chapter, we will discuss both space-driven and data-driven data structures for storing spatio-temporal data. We will initiate our discussion with multiversion linear quad tree space driven data structure.

22.2

Overlapping Linear Quadtree

Tzouramanis, Vassilakopoulos and Manolopoulos in [4] proposed Multiversion linear quadtrees (MVLQ), also called overlapping linear quad trees, which are analogous to Multiversion Btrees (MVBT) [5], but with signiﬁcant diﬀerences. Instead of storing transaction time for each individual object in MVBT, an MVLQ consolidates object descriptors that share a same transaction time. As it will be evident from the following discussion, these object descriptors are code words derived from a linear representation of multiversion quadtrees. The idea of storing temporal information about the objects is based upon including a parameter for transaction time for these objects. Each object is given a unique time-stamp Ti (transaction time), where i ∈ [1..n] and n is the number of objects in the database. This time stamp implicitly associates a time value to each record representing the object. Initially, when the object is created in the database, this time-interval is set equal to [Ti , ∗). Here, ‘*’ refers to as-of-now, a usage indicating that the current object is valid until a unspeciﬁed time in the future, when it would be terminated (at that time, * will be replaced by the Tj , j ∈ [1..n] and j > i, the time-stamp at the time when the object is terminated). Before we proceed further, let us gather some brief background in regional Quadtrees, commonly called quadtrees, a spatial data structure. In the following discussion it is assumed that a Spatio-temporal data structure (STDS) is required to be developed for a sequence of evolving regional images, which are stored in an image database. Each image is assumed to be represented as a 2N × 2N matrix of pixel values, where N is a positive integer. Quadtree is a modiﬁcation of T-pyramid. Every node of the tree, except the leaves, has four children (NW: north-western, NE: north-eastern, SW: south-western, SE: southeastern). The image is divided into four equal quadrants at each hierarchical level, but it is not necessary to store nodes at all levels. If a parent node has four children of the same homogeneous (for example, intensity) value, it is not necessary to record them. Figure 22.1 represents an image and its corresponding quadtree representation. Quadtree is a memoryresident data structure, with each node being stored as a record pointing to its children. However, when the represented object becomes too large it may not be possible to store

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22-3

FIGURE 22.1: (a) A binary 23 × 23 image (b) Its corresponding region quadtree. The location codes for the homogeneous codes are indicated in brackets.

the entire quadtree in the main memory. The strategy that is followed at this point is that the homogeneous components of the quadtrees are stored in a B+ tree, a secondary memory data structure, eliminating the need of pointers in quadtree representation. In this case, addresses representing the location of the homogeneous node and its size constitute a record. Such a version of Quadtree is called linear region quadtree [6]. Several linear representations of regional quadtrees have been proposed, but ﬁxed length (FL), ﬁxed length-depth (FD) and variable length (VL) versions have attracted most attention. We refer the interested reader to [6] for details on these representations, while we concentrate on the FD representation. In this representation, each homogeneous node is represented by a pair of two codes, location code and level number . Location node C denotes the correct path to this node when traversing the Quadtree from its root till the appropriate leaf is reached and a level number L refers to the level at which the node is located. This makes up the ﬁxed length-depth linear implementation of Quadtree.The quadrants NW, NE, SW and SE are represented as 0, 1, 2 and 3 respectively. The location codes for the homogeneous nodes of a quadtree are presented in Figure 22.1. A persistent data structure (Chapter 31) [7] is one in which a change to the structure can be made without eliminating the old version, so that all versions of the structure persist and can at least be accessed (the structure is said to be partially persistent) or even modiﬁed (the structure is said to be fully persistent). Multi-Version Linear Quad-tree (MVLQ) is an example of a persistent data structure, in contrast to Linear Quadtree, a transient data structure. In MVLQ each object in the database is labeled with a time for maintaining the past states. MVLQ couples time intervals with spatial objects in each node. The leaf of the MVLQ contains the data records of the format: <

(C, L), T, EndTime >

where, - C is the location code of the homogeneous node of the region Quadtree, - L is the level of the region quad tree at which the homogeneous node is present, - T represents the time interval when the homogeneous node appears in the image sequence,

© 2005 by Chapman & Hall/CRC

22-4

Handbook of Data Structures and Applications

FIGURE 22.2: MVLQ structure after the insertion of image given in Figure 22.1.a.

- EndTime is Transaction time when the homogeneous leaf node becomes historical. The non-leaf nodes contain entries of the form [4]: < C , P , ptr, StartT ime>

where, - C is the smallest C recorded in that descendant node, - P is the time interval that expresses the lifespan of the latter node, - Ptr is a pointer to a descendant node, - StartTime is the time instant when the node was created. The MLVQ structure after the insertion of image given in Figure 22.1.a is given in Figure 22.2. In addition to the main memory structure of the MVLQ described above, it also contains two additional main memory sub-structures: Root*table and Depth First expression (DFexpression) of the last inserted object. Root*table: MVLQ has one tree for each version of the data. Consequently, each version can be reached through its root which can be identiﬁed by the time-interval of the version that it represents and a pointer to its location. If T is the time interval of the root, given by T =[Ti , Tj ), where i, j ∈ [1..n], i<j, and P tr is a pointer to the physical address of the root, then each record in the Root*table identifying a root is represented in the following form: < T , ptr >

DF -expression of the last inserted object [4,8]: The purpose of Depth ﬁrst expression (DFexpression) is to contain the pre-fetched location of the homogeneous nodes of last insert data object. The advantage of this storage is that when a new data object is being inserted, the stored information can be used to calculate the cost of deletions, insertions and/or updates. If the DF-expression is not stored, then there is an input/output cost associated with locating the last insert object’s homogeneous nodes locations. The DF-expression is an array representation of preorder traversal of the last inserted object’s Quadtree.

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22-5

FIGURE 22.3: Algorithm for an insertion of an object in MVLQ.

22.2.1

Insertion of an Object in MVLQ

The ﬁrst step in insertion of a quadcode of a new object involves identifying the corresponding leaf node. If the corresponding leaf node is full, then a node overﬂow [4] occurs. Two possibilities may arise at this stage, and depending on the StartTime ﬁeld of the leaf, a split may be initiated. If NC is the node capacity, k and c are integer constants (greater than zero), then the insertion is performed based on the algorithm presented in Figure 22.3.

22.2.2

Deletion of an Object in MVLQ

The algorithm for the deletion of an object from MVLQ is straightforward. If Ti = StartT ime, then physical deletion occurs and the appropriate entry of the object is deleted from the leaf. If number of entries in the leaf < N C/k (threshold), then a node-underflow is handled as in B+ tree with an additional step of checking for a sibling’s StartTime for key redistribution. IfTi > StartT ime, then logical deletion occurs and the temporal information of an entry between range ([Ti , ∗), [Ti , Tj )) is updated. If an entry is logically deleted in a leaf with exactly N C/k present quadcode versions, then a version underflow [5] occurs that causes a version split of the node, copying the present versions of its quadcodes into a new node. After version split, the number of present versions of quadcodes is below (1+e) N C/k and a merge is then attempted with a sibling or a copy of that sibling.

22.2.3

Updating an Object in MVLQ

Updating a leaf entry refers to update of the ﬁeld L(level) of the object’s code. This is implemented in a two-step fashion. First, a logical deletion of the entry is performed. Second, the new version is inserted in place of that entry through the steps outlined above.

© 2005 by Chapman & Hall/CRC

22-6

22.3

Handbook of Data Structures and Applications

3D R-tree

In the previous section a space driven, multi-version linear Quadtree based spatio-temporal data structure was presented. In this section we discuss a data driven data structure that partitions the set of objects for eﬃcient spatio-temporal representation. Theidoridis, Vazirgiannis and Sellis in [9] have proposed a data structure termed 3D Rtree for indexing spatio-temporal information for large multimedia applications. The data structure is a derivation of R-trees (Chapter 21) whose variants have been demonstrated to be an eﬃcient indexing schema for high-dimensional spatial objects. In [9] Theidoridis et al. have adopted a set of operators deﬁned in [10] to represent possible topological-directional spatial relationships between two 2-dimensional objects. An anthology of 169 relationships Ri j (i ∈ [1..13], j ∈ [1..13]) can represent a complete set of spatial operators. Figure 22.4 represents these relations. An interested reader can ﬁnd a complete illustration of these topographical relations relationships in [10]. To represent the temporal relationships, a set of temporal operators deﬁned in [11] are employed. Any spatiotemporal relationships among objects can be found using these operators. For Example, object Q to appear 7 seconds after the object P , 14cm to the right and 2cm down the right bottom vertex of object P can be represented as the following composition tuple: Rt = P [(r13

13 , v3, v2, 14, 2), (−7−

>)]Q

where r13 13 is the corresponding spatial relationship, (−7− >) is the temporal relationship between the objects, v3 and v4 are the named vertices of the objects while (14, 2) are their spatial distances on the two axes. Theidoridis et al. have employed the following typical spatio-temporal relationships to illustrate their indexing schema [9]. These relationships can be deﬁned as spatio-temporal operators. • overlap during(a,b): returns the catalog of objects a that spatially overlap object b during its execution. • overlap before(a,b): returns the catalogue of objects a that spatially overlap object b and their execution terminates before the start of execution of b. • above during(a,b): returns the catalogue of objects a that spatially lie above object b during the course of its execution. • above before(a,b): returns the catalogue of objects a that spatially lie above object b and their execution terminates before the start of execution of b. Spatial and Temporal features of objects are typically identiﬁed by a six dimensions (each spatio-temporal object can be perceived as a point in a 6-dimensional space): (x1 , x2 , y1 , y2 , t1 , t2 ), where (x1 , x2 ) : Projection of the object on the horizontal plane. (y1 , y2 ) : Projection of the object on the vertical plane. (t1 , t2 ) : Projection of the object on the time plane. In a na¨ıve approach, these object descriptors coupled by the object id (unique for the object that they represent) can be stored sequentially in a database. An illustration of such an organization is demonstrated in Figure 22.5. Such a sequential schema has obvious demerits. Answering of spatial temporal queries, such as one described above, would require a full scan of the data organization, at least once. As indicated before, most spatio-temporal databases suﬀer from the curse of dimensionality

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22-7

FIGURE 22.4: Spatial relationships between two objects covering directional-topological information [4].

FIGURE 22.5: Schema for sequential organization of spatio-temporal data.

and sequential organization of data exhibits this curse through depreciated performance, rather than reducing it. In another schema, two indices can be maintained to store spatial and temporal components separately. Speciﬁcally, they can be organized as follows. 1. Spatial index: An index to store the size and coordinates of the objects in two dimensions 2. Temporal index: A one-dimensional index for storing the duration and start/stop time for objects in one dimension. R-trees and their variants have been demonstrated to be eﬃcient for storing n-dimensional

© 2005 by Chapman & Hall/CRC

22-8

Handbook of Data Structures and Applications

data. Generally speaking, they could be used to store the spatial space components in a 2D R-tree and temporal components in a 1D R-tree. This schema is better than sequential search, since a tree structure provides a hierarchical organization of data leading to a logarithmic time performance. More details on R-trees and its variants can be found in Chapter 21. Although this schema is better than sequential searching, it still suﬀers from a limitation [9]. Consider the query overlap during, which would require that both the indices (spatial 2D R-tree and temporal 1D R-tree) are searched individually (in the ﬁrst phase) and then the intersection of the recovered answer sets from each of the indices is reported as the index’s response to the query. Access to both the indices individually and then postintersection can cumulatively be a computationally expensive procedure, especially when each of these indices are dense. Spatial-joins [9,12] have been proposed to handle queries on two indexes, provided these indexing schemas adopt the same spatial data structure. It is not straightforward to extend these to handle joins in two varieties of spatial data structures. Additionally, there might be possible inherent relationships between the spatial descriptors and the temporal descriptors resident in two diﬀerent indexes which can be learned and exploited for enhanced performance. Arranging and searching these descriptors separately may not be able to exploit these relationships. Hence, a uniﬁed framework is needed to present spatio-temporal components preferably in a same indexing schema. Before we proceed further, let us brieﬂy discuss the similarity search procedure in R-trees. In R-trees Minimum bounding boxes (MBB); or minimum bounding rectangles in twodimensions) are used to assign geometric descriptors to objects for similarity applications, especially in data mining [14]. The idea behind usage of MBB in R-trees is the following. If two objects are disjoint, then their MBBs should be disjoint and if two objects overlap, then their MBB should deﬁnitely overlap. Typically, a spatial query on a MBB based index involves the following steps. 1. Searching the index: This step is used to select the answer and some possible false alarms from a given data set, ignoring those records that cannot possibly satisfy the query criterion. 2. Dismissals of false alarms: The input to this step is the resultant of the index searching step. In this step the false alarms are eliminated to identify correct answers, which are reported as the query response. Designing an indexing schema for a multimedia application requires design of a spatiotemporal indexing structure to support spatio-temporal queries. Consider the following scenario. Example 22.1

An application starts with a video clip A located at point (1,7) relative to the application origin Θ. After 2 minutes an image B appears inside A with 1 unit above its lower horizontal edge and 3 units after its left vertical edge. B disappears after 2 minutes of its presence, while A continues. After 2 minutes of B’s disappearance, an text window C appears 3 units below the lower edge of A and 4 units to the right of left edge of it. A then disappears after 1 minute of C’s appearance. The moment A disappears, a small image D appears 2 units to the right of right edge of C and 3 units above the top edge of C. C disappears after 2 minutes of D’s appearance. As soon as C disappears, a text box E appears 2 units below the lower edge of D and left aligned with it. E lasts for 4 minutes after which it disappears. D disappears 1 minute after E’s disappearance. The application ends with D’s disappearance. The spatial layout of the above scenario is presented in Figure 22.6a and the temporal layout is presented in Figure 22.6b.

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22-9

FIGURE 22.6: (a) Spatial layout of the multimedia database (b) Temporal layout of the multimedia database. A typical query that can be posed on such a database of objects described above is “Which objects overlap the object A during its presentation?”. In [9], the authors have proposed a uniﬁed schema to handle queries on a spatio-temporal database, such as the one stated above. The schema amalgamates the spatial and temporal components in a single data structure such as R-trees to exhibit advantages and performance gains over the other schemas described above. This schema amalgamates need of spatial joins on two spatial data structures besides aggregating both attributes under a uniﬁed framework. The idea for representation of spatio-temporal attributes is as follows. If an object which initially lies at point (xa , ya )during time [ta , tb )and at (xb , yb ) during [tb , tc ), it can be modeled by two lines [(xa , ya , ta ), (xa , ya , tb )) and [(xb , yb , tb ), (xb , yb , tc )). These lines can be presented in a hierarchical R-tree index in three dimensions. Figure 22.7 presents the uniﬁed spatialtemporal schema for the spatial and temporal layouts of the example presented above.

22.3.1

Answering Spatio-Temporal Queries Using the Unified Schema

Answering queries on the above presented uniﬁed schema is similar to handling similarity queries using R-trees. Consider the following queries [9]: Query-1: “Find all the objects on the screen at time T2 ” (Spatial layout query). This query can be answered by considering a rectangle Q1 (Figure 22.7) intersecting the time-axis at exactly one point, T2 . Query-2: “Find all the objects and their corresponding temporal duration between the time interval (T0 ,T1 )” (temporal layout query). This query can be answered by considering a box Q2(Figure 22.7) intersecting the time-axis between the intervals (T0 , T1 ). After we have obtained the objects enclosed by the rectangle Q1 and box Q2, these objects are ﬁltered (in main memory) to obtain the answer set. Query-3: “Find all the objects and their corresponding spatial layout at time T =3 minutes”. This query can be answered by looking at the screenshot of spatial layout of objects that were present at the given instant of time. The resultant would be the list of objects and their corresponding spatial descriptors. The response to this query is given in Figure 22.8a.

© 2005 by Chapman & Hall/CRC

22-10

Handbook of Data Structures and Applications

FIGURE 22.7: A uniﬁed R-tree based schema for storing spatial and temporal components.

FIGURE 22.8: (a) Response to Query-3 (b) Response to Query-4.

Query-4: Find the temporal layout of all the objects between the time interval (T1 = 2, T2 = 9). This query can be answered by drawing a rectangle on the uniﬁed index with dimensions (Xmax − 0) × (Ymax − 0) × (T2 − T1 ). The response of the query is shown in Figure 22.8b.

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22.3.2

22-11

Performance Analysis of 3D R-trees

Theodoridis et al. in [9] analyzed the performance of the proposed R-trees using the expected retrieval cost metric that they presented in [15]. An interested reader is referred to [15,9] for details on this metric. Based on the analytical model of this metric, it is asserted that one can estimate the retrieval cost of an overlap query based on the information attainable from the query window and data set only. In the performance analysis it was demonstrated that since the expected retrieval cost metric expresses the expected performance of R-trees on overlapping queries, the retrieval of spatio-temporal operators using R-trees is cost-equivalent to the cost of retrieval of an overlap query using an appropriate query window Q. Rigorous analysis on 10,000 objects asserted the following conclusions in [9]: 1. For the operators with high selectivity (overlap, during, overlap during), the proposed 3D R-trees outperformed sequential search at a level of one to two orders of magnitude. 2. For operators with low selectivity (above, before, above before), the proposed 3D R-trees outperformed sequential search by factors ranging between 0.25-0.50 fraction of the sequential cost.

22.3.3

Handling Queries with Open Transaction-Times

In the previous section although 3D R-trees were demonstrated to be very eﬃcient compared to sequential search, it suﬀers from a limitation. The transaction times presented as creation and termination time of an object are expected to be known a priori before they can be stored and queries from the index. However, in most practical circumstances the duration of existence of an object is not known. In other words, when the object is created, all we know is that it would remain valid until changed. The concept of until changes is a welldiscussed issue (see [16,17]). Data structures like R-trees and also its modiﬁed form of 3D R-tree are typically not capable of handling such queries having open transaction times. In the next and the following section, we discuss two spatio-temporal data structures capable of handling queries with open transaction times.

22.4

2+3 R-tree

Nascimento et al. in [17] have proposed a solution to the problem of handling objects with open transaction times. The idea is to split the indexing of these objects into two parts: one for two-dimensional points and other for three-dimensional lines. Two-dimensional points store the spatial information about the objects and their corresponding start time. Threedimensional lines store the historical information about the data. Once the ‘started’ point stored in 2D R-tree becomes closed, a corresponding line is constructed to be stored in the 3D R-tree and the point entry is deleted from the 2D R-tree. It should be understood that both trees are expected to be searched depending on the time stamp at which the query is posed. If the end times for each of the spatial points is known a priori, then the need of a 2-D can be completely eliminated reducing the structure to a 3D R-tree.

© 2005 by Chapman & Hall/CRC

22-12

Handbook of Data Structures and Applications

FIGURE 22.9: A R-tree at time T0.

FIGURE 22.10: A R-tree at time T1. The modiﬁed nodes are in dark boxes.

22.5

HR-tree

One possible way to index spatio-temporal data is to build one R-tree for each timestamp, which is certainly space-ineﬃcient. The demerit of 2+3 R-tree is that it requires two stores to be searched to answer a query. The HR-tree [18] or Historical R-tree “compresses” multiple R-trees, so that R-tree nodes which are common in two timestamps are shared by the corresponding R-trees. The main idea is based on the expectation that a vast majority of indexed points do not change their positions at every time stamp. In other words, it is reasonable to expect that a vast majority of spatial points will ‘share’ common nodes in respective R-trees. The HR-tree exploits this property by keeping a ‘logical’ linkage to a previously present spatial point if it is referenced again in the new R-tree. Consider two R-trees in Figure 22.9 and Figure 22.10 at two diﬀerent time stamps (T0, T1). An HR-tree for these R-trees is given in Figure 22.11.

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22-13

FIGURE 22.11: The HR-tree.

22.6

MV3R-tree

The MV3R-tree was proposed by Yufei and Papadias in [19] and is demonstrated to process time-stamp and interval queries eﬃciently. Timestamp queries discover all objects that intersect a window query at a particular timestamp. On the other hand, interval queries include multiple timestamps in the discovered response. While the spatial data structures proposed before have been demonstrated [9,19] to be suitable for either of these queries (or a subset of it), none of them have been established to process both timestamp and interval queries eﬃciently. MV3R-tree has addressed limitations in terms of eﬃciency of the above trees in handling both of these queries. MV3R-tree consists of a multi-version R-tree (MVRtree) and an auxiliary 3D R-tree built on the leaves of the MVR-tree. Although the primary motivation behind the development of MV3R-tree are Multiversion B-trees [20] (which are extended from B+ trees), they are signiﬁcantly diﬀerent from these versions. Before we proceed further, let us understand the working of a multiversion B-tree. A typical entry of a multiversion B-tree takes the following form < id, timestart , timeend , P >. For non-leaf nodes, timestart and timeend are the minimum and maximum values respectively in this node and P is a pointer to the next level node. For a leaf node, the time-stamps timestart and timeend indicate when the object was insert and deleted from the index and pointer P points to the actual record with a corresponding id value. At time timecurrent , the entry is said to be alive if timestart < timecurrent , otherwise dead [19]. There can be multiple roots in a Multiversion B-tree, where each root has a distinguishing time-range it represents. A search on the tree begins at identifying the root within which the time-stamp of the query belongs. The search is continued based on the id, timestart and timeend . A weak version condition speciﬁes that for each node, except the root, at least K.T entries are alive at time t, where K is the node capacity and T is the tree parameter. This condition ensures that entries alive at the identical time-stamps are in a majority of the cases assembled together to allow easy time stamp queries.

© 2005 by Chapman & Hall/CRC

22-14

Handbook of Data Structures and Applications

FIGURE 22.12: A MV3R-tree.

FIGURE 22.13: A 3-D visualization of MVR-tree.

3D R-tree are very space-eﬃcient and can handle long interval queries eﬃciently. However, timestamp and short-interval queries using 3D R-trees are expensive. In addition to this, 3D R-trees do not include a methodology such as the weak version condition to ensure that each node has a minimum number of live entries at a given timestamp. HR-trees [18], on the other hand, maintain an R-tree (or its derivative) for each timestamp and the timestamp query is directed to the corresponding R-tree to be searched within it. In other words, the query disintegrates into an ordinary window query and is handled very eﬃciently. However, in case of an interval query, several timestamps should search the corresponding trees of all the timestamps constituting the interval. The original work in HR-tree did not present a schema for handling interval queries; however, authors in [19] have proposed a solution to this problem by the use of negative and positive pointers. The performance of this schema is then compared with MV3R-tree in [19]. It is demonstrated that MV3R-trees outperform HR-trees and 3D R-trees even in extreme cases of only timestamp and interval-based queries. Multiversion 3D R-trees (MV3R-trees) combine a multiversion R-tree (MVR-tree) and a small auxiliary 3D R-tree built on the leaf nodes of the MVR-tree as shown in Figure 22.12. MVR-trees maintain multiple R-trees and has entries of the form < M BR,

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22-15

FIGURE 22.14: Moving data points and their leaf-level MBBs at subsequent points.

timestart , timeend , P >, where MBR refers to Minimum bounding rectangle and other entries are similar to B+ trees. An example of a 3-D visualization of a MVR-tree of height 2 is shown in Figure 22.13. The tree consists of Object cubes (A-G), leaf nodes (H-J) and root of the tree K.Detailed algorithms for insertion and deletion in these trees are provided in [19]. Time-stamp queries can be answered eﬃciently using MVR-trees. An auxiliary 3D R-tree is built on the leaves of the MVR-tree in order to process interval queries. It is suggested that for a moderate node capacity, the number of leaf nodes in an MVR-tree is much lower than the actual number of objects, hence this tree is expected to be small compared to a complete 3D R-tree. Performance analysis has shown that the MV3R-tree oﬀers better tradeoﬀ between query performance and structure size than the HR-tree and 3D R-tree. For typical situations where workloads contain both timestamp and interval queries, MV3R-trees outperform HRtrees and 3D R-trees signiﬁcantly. The incorporation of the auxiliary 3D R-tree not only accelerates interval queries, but also provides ﬂexibilities towards other query processing, such as, spatio-temporal joins.

22.7

Indexing Structures for Continuously Moving Objects

Continuously moving objects pose new challenges to indexing technology for large databases. Sources for such data include GPS systems, wireless networks, air-traﬃc controls etc. In the previous sections we have outlined some indexing schemas that could eﬃciently index spatio-temporal data types but some other schemas have been developed speciﬁcally for

© 2005 by Chapman & Hall/CRC

22-16

Handbook of Data Structures and Applications

answering predictive queries in a database of continuously moving objects. In this section we discuss an assortment of such indexing schemas. Databases of continuously moving objects have two kinds of indexing issues: Storing the historical movements in time of objects and predicting the movement of objects based in previous positional and directional information. Such predictions can be made more reliably for a future time Tf , not far from the current timestamp Tf . As Tf increases, the predictions become less and less reliable since the change of trajectory by a moving object results in inaccurate prediction. Traditional indexing schemas such as R*-trees are successful in storing multidimensional data points but are not directly useful for storing moving objects. An example[21] of such kind of system is shown in Figure 22.14. For simplicity a two dimensional space is illustrated, but practical systems can have larger dimensions. First part of ﬁgure shows multiple objects moving in diﬀerent directions. If traditional R*-trees is used for indexing these data, the minimum bounding boxes for the leaf level of the tree are demonstrated in Figure 22.14b. But these objects might be following diﬀerent trajectories (as shown by arrows in Figure 22.14a and at subsequent time stamps, the leaf level MBBs might change in size and position, as demonstrated in Figure 22.14c and Figure 22.14d. Since traditional indexing methods are not designed for such kind of applications, some novel indexing schemas are described in [21-24] to handle such data types and queries imposed on them.

22.7.1

TPR-tree

Saltenis et al in [21] proposed TPR-tree, an acronym for Time-Parameterized R*-tree, based on the underlying principles of R-tree. TPR-tree indexes the current and future anticipated positions of moving objects in one, two and three dimensions. The basic algorithms of R*trees are employed for TPR-tree with a modiﬁcation that the leaf and non-leaf minimum bounding rectangles are now augmented with velocity vectors for these rectangles. The velocity vector for an edge of the rectangle is chosen so that the object remains inside the moving rectangle. TPR-tree can typically handle the following three types of queries, • Timeslice Query: A query Q speciﬁed by hyper-rectangle R located at time point t. • Window Query: A query Q speciﬁed by hyper-rectangle R covering an interval from [Ta ,Tb ]. • Moving Query: A query Q speciﬁed by hyper-rectangles Ra and Rb at diﬀerent times Ta and Tb , forming a trapezoid. Figure 22.15 shows objects o1, o2, o3 and o4 moving in time. The trajectories of these objects are shifting, as shown in ﬁgure. The three types of queries as described above are illustrated in this ﬁgure. Q0 and Q1 are timeslice queries, Q2 and Q3 are window queries and Q4 is a moving query. The structure of TPR-tree is very similar to R*-tree with leaves consisting of position and pointer of the moving object. The nodes of the tree consist of pointers to subtree and bounding rectangles for the entries in subtree. TPR-trees store the moving objects as linear function of time with time-parameterized bounding rectangles. The index does not consist of points and rectangles for time stamp older than current time. TPR-tree diﬀers from the R*-trees in how its insertion algorithms group points into nodes. While in R*-trees the heuristics of the minimized area, overlap, and margin of bounding rectangles are used to assign points to the nodes of the tree, in case of TPR-trees these heuristics are replaced

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22-17

FIGURE 22.15: Types of queries on one-dimensional data.

FIGURE 22.16: A bounding interval and a query imposed on the TPR-tree.

by their respective integrals, which are representative their temporal component. Given an objective function F (t), the following integral is expected to be minimized [21]. tc+H

F (t)dt, where tc is the current time and H is the time horizon.

tc

© 2005 by Chapman & Hall/CRC

22-18

Handbook of Data Structures and Applications

The objective function can be area or perimeters of the bounding rectangles, or could represent the overlap between these rectangles. Figure 22.16 represents a bounding interval and a query in the TPR-tree. The area of the shaded region in Figure 22.16 represents the time integral of the length of the bounding interval. Saltenis et al. in [21] compared the performance of TPR-trees with load-time bounding rectangles, TPR-tree with update-time bounding rectangles and R-tree with a set of experiments with varying workloads. The results demonstrated that TPR-tree outperforms other approaches by considerable improvement. It was also demonstrated that tree does not degrade severely in performance with increasing time and it can be tuned to take advantage of a speciﬁc update rate.

22.7.2

REXP -tree

Saltenis and Jensen in [22] proposed REXP -tree a balanced, multi-way tree with a structure of R*-tree. REXP -tree is an improvement over TPR-tree, assuming that the some objects used in indexing expires after a certain period. These trees can handle realistic scenario where certain objects are no longer required, that is when they expire. By removing the expired entries and re-computing bounding rectangles, the index organizes itself to handle subsequent queries eﬃciently. This tree structure ﬁnds its application where the objects not reporting their position for a certain period, possibly implying that they are no more interested in the service. The index structure of REXP -tree diﬀers from TPR-tree in insertion and deletion algorithms for disposing the expired nodes. REXP -tree uses a ‘lazy strategy’ for deleting the expired entries. Another possible strategy is scheduled deletion of entries in TPR-trees. During the search, insertion and deletion operations, only the live entries are searched and expired entries are physically removed when the content of the node are modiﬁed and is written to the disk. Whenever an entry in internal node is deleted, the entire subtree is reallocated. The performance results demonstrated in [22] show that choosing the right bounding rectangles and corresponding algorithms for grouping entries is not straightforward and depends on the characteristics of the workloads.

22.7.3

STAR-tree

Procopiuc, Agarwal and Har-Peled in [23] propose a Spatio-Temporal Self-Adjusting R-tree or STAR-tree. STAR-tree indexing schema is similar to TPR trees with few diﬀerences. Speciﬁcally, STAR-tree groups points according to their current locations and may result in points moving with diﬀerent velocities being included in the same rectangle. Scheduled events are used to regroups points to control the growth of such bounding rectangles. It improves the structure of TPR-tree by self-adjusting the index, whenever index performance degrades. Intervention of user is not needed for adjustment of the index and the query time is kept low even without continuously updating the index by positions of the objects. STARtree doesn’t need periodic rebuilding of indexing and estimation of time horizon. It provides tradeoﬀs between storage and query performance and between time spent in updating the index and in answering queries. STAR-tree can handle not only the timeslice and range queries as those handled by TPR-trees, but also nearest neighbor queries for continuously moving objects.

© 2005 by Chapman & Hall/CRC

Managing Spatio-Temporal Data

22.7.4

22-19

TPR*-tree

TPR*-tree proposed by Tao, Papadias and Sun in [24] is an optimized spatio-temporal indexing method for predictive queries. TPR-tree, described in the previous section, does not propose an analytical model for cost estimation and query optimization and quantiﬁcation of its performance. TPR*-tree assumes a probabilistic model that accurately estimates the number of disk accesses in answering a window query in a spatio-temporal index. The authors in [24] investigate the optimal performance of any data-partition index using the proposed model. The TPR*-tree improves the performance of TPR-tree by employing a new set of insertion and deletion algorithms that minimize the average number of node accesses for answering a window query, whose MBB uniformly distributes in the data space. The static point interval query with the following constraints has been is optimized [24] using the TPR*-tree: • MBB has a length |QR | = 0 on each axis. • Velocity bounding rectangle is {0,0,0,0}. • Query interval QI = [0, H], where H is the horizon parameter. It is demonstrated that the above choice of parameters leads to nearly-optimal performance independently of the query parameters. The experiments have also shown that TPR*-trees signiﬁcantly outperforms the conventional TPR-tree under all conditions.

References [1] B.-U. Pagel, F. Korn, C. Faloutsos, “Deﬂating the Dimensionality Curse using Multiple Fractal Dimensions,” in 16th Intl. Conf. on Data Engineering (ICDE), San Diego, CA - USA, 2000. [2] C. S. Jensen, J. Cliﬀord, R. Elmarsi et al., “A Consensus Glossary of Temporal Database Concepts,” SIGMOD Record, 23(1), pp. 52-64, March 1994. [3] Mahdi Abdelguerﬁ, Julie Givaudan, Kevin Shaw, Roy Ladner, “The 2-3TR-tree, a trajectory-oriented index structure for fully evolving valid-time spatio-temporal datasets,” ACM-GIS 2002: 29-34. [4] T. Tzouramanis, M. Vassilakopoulos, and Y. Manolopoulos, “Multiversion linear quadtree for spatiotemporal data,” in Proc. ADBIS-DASFAA. [5] B. Becker, S. Gschwind, T. Ohler, B. Seeger and P. Widmayer, “An Asymptotically Optimal Multiversion B-tree,” The VLDB Journal, Vol.5, No.4, pp.264-275, 1996. [6] H. Samet, The Design and Analysis of Spatial Data Structures, AddisonWesley,Reading MA, 1990. [7] J. R. Driscoll, N. Sarnak, D. D. Sleator, and R. E. Tarjan, “Making Data Structures Persistent,” Journal of Computer and System Sciences, Vol.38, pp.86-124, 1989. [8] E. Kawaguchi and T. Endo, “On a Method of Binary Picture Representation and its Application to Data Compression,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol.2, No.1, pp.27-35, 1980. [9] Y. Theodoridis, M. Vazirgiannis, T. Sellis, “Spatio-Temporal Indexing for Large Multimedia Applications,” In Proceedings of the 3rd IEEE Conference on Multimedia Computing and Systems (ICMCS), 1996. [10] D. Papadias, Y. Theodoridis, “Spatial Relations, Minimum Bounding Rectangles, and Spatial Data Structures,” International Journal of Geographic Information Systems, 1996. [11] M. Vazirgiannis, Y. Theodoridis, T. Sellis, ”Spatio-Temporal Composition in Multime-

© 2005 by Chapman & Hall/CRC

22-20

[12] [13] [14]

[15]

[16]

[17]

[18] [19] [20] [21]

[22] [23] [24]

Handbook of Data Structures and Applications

dia Applications,” Technical Report KDBSLAB-TR-95-09, Knowledge and Database Systems Laboratory, National Technical University of Athens, 1995. M. G. Martynov, “Spatial Joins and R-trees,” ADBIS, 1995: 295-304. J. Han and M. Kamber., Data Mining: Concepts and Techniques., Morgan Kaufmann, 2000. Y. Theodoridis, D. Papadias, “Range Queries Involving Spatial Relations: A Performance Analysis,” Proceedings of the 2nd International Conference on Spatial Information Theory (COSIT), 1995. Y. Theodoridis, T. Sellis, “On the Performance Analysis of Multidimensional Rtree-based Data Structures,” Technical Report KDBSLABTR-95-03, Knowledge and Database Systems Laboratory, National Technical University of Athens, Greece, 1995. J. Cliﬀord, C. E. Dyreson, T. Isakowitz, C. S. Jensen, R. T. Snodgrass, “On the Semantics of “Now” in Databases,” ACM Transactions on Database Systems, 22(2):171214, 1997. M. Nascimento, R. Silva, and Y. Theodoridis, “Evaluation of access structures for discretely moving points,” In Proceedings of the International Workshop on SpatioTemporal Database Management, pp.171-188, 1999. M. Nascimento,and J. Silvia, “Towards Historical Rtrees,” In Proceedings of ACM Symposium on Applied Computing (ACM-SAC), (1998): pp. 235–240. Y. Tao, D. Papadias, “The MV3R-tree: A Spatio-Temporal Access Method for Timestamp and Interval Queries,” VLDB, 2001. B. Becker, S. Gschwind, T. Ohler, B. Seeger, P. Widmayer, “An Asymptotically Optimal Multiversion B-Tree,” VLDB Journal (1996), 5(4): 264-275. S. Saltenis, C. Jensen, S. Leutenegger and M. Lopez, “Indexing the Positions of Continuously Moving Objects,” In Proc. of the 19th ACM-SIGMOD Int. Conf. on Management of Data, Dallas, Texas (2000). S. Saltenis and C. S. Jensen, “Indexing of Moving Objects for Location-Based Services,” TimeCenter (2001), TR-63, 24 pages. C.M. Procopiuc, P. K. Agarwal, S. Har-Peled. STAR-Tree: An Eﬃcient Self-Adjusting Index for Moving Objects. 4th Workshop on Algorithms Engineering (2002). Tao, Y., Papadias, D., Sun, J. The TPR*-Tree: An Optimized Spatio-Temporal Access Method for Predictive Queries. VLDB (2003).

© 2005 by Chapman & Hall/CRC

23 Kinetic Data Structures 23.1 23.2 23.3 23.4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Motion in Computational Geometry . . . . . . . . . . . . Motion Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kinetic Data Structures . . . . . . . . . . . . . . . . . . . . . . . . . . .

23-1 23-2 23-2 23-2

Convex Hull Example • Performance Measures for KDS • The Convex Hull, Revisited

23.5

A KDS Application Survey . . . . . . . . . . . . . . . . . . . . . . .

23-7

Extent Problems • Proximity Problems • Triangulations and Tilings • Collision Detection • Connectivity and Clustering • Visibility • Result Summary • Open Problems

Leonidas Guibas Stanford University

23.1

23.6 23.7

Querying Moving Objects . . . . . . . . . . . . . . . . . . . . . . . . . 23-15 Sources and Related Materials . . . . . . . . . . . . . . . . . . . 23-15

Introduction

Motion is ubiquitous in the physical world, yet its study is much less developed than that of another common physical modality, namely shape. While we have several standardized mathematical shape descriptions, and even entire disciplines devoted to that area—such as Computer-Aided Geometric Design (CAGD)—the state of formal motion descriptions is still in ﬂux. This in part because motion descriptions span many levels of detail; they also tend to be intimately coupled to an underlying physical process generating the motion (dynamics). Thus, until recently, proper abstractions were lacking and there was only limited work on algorithmic descriptions of motion and their associated complexity measures. This chapter aims to show how an algorithmic study of motion is intimately tied via appropriate data structures to more classical theoretical disciplines, such as discrete and computational geometry. After a quick survey of earlier work (Sections 23.2 and 23.3), we devote the bulk of this chapter to discussing the framework of Kinetic Data Structures (Section 23.4) [16, 32] and its many applications (Section 23.5). We also brieﬂy discuss methods for querying moving objects (Section 23.6).

∗ A version of this chapter has also appeared in the CRC Handbook of Discrete and Computational Geometry (Chapter 50: Modeling Motion), 2nd Edition

© 2005 by Chapman & Hall/CRC

23-2

23.2

Handbook of Data Structures and Applications

Motion in Computational Geometry

Motion has not been studied extensively within the context of theoretical computer science. Until recently, there were only sporadic investigations of moving objects in the computational geometry literature. Dynamic computational geometry refers to the study of combinatorial changes in a geometric structure, as its deﬁning objects undergo prescribed motions. For example, we may have n points moving linearly with constant velocities in R2 , and may want to know the time intervals during which a particular point appears on their convex hull, the steady-state form of the hull (after all changes have occurred), or get an upper bound on how many times the convex hull changes during this motion. Such problems were introduced and studied in [13]. A number of other authors have dealt with geometric problems arising from motion, such as collision detection or minimum separation determination [35, 41, 42]. See also Chapter 56. For instance, [42] shows how to check in subquadratic time whether two collections of simple geometric objects (spheres, triangles) collide with each other under speciﬁed polynomial motions.

23.3

Motion Models

An issue with the above research is that object motion(s) are assumed to be known in advance, sometimes in explicit form (e.g., points moving as polynomial functions of time). Indeed, the proposed methods reduce questions about moving objects to other questions about derived static objects. While most evolving physical systems follow known physical laws, it is also frequently the case that discrete events occur (such as collisions) that alter the motion law of one or more of the objects. Thus motion may be predictable in the short term, but becomes less so further into the future. Because of such discrete events, algorithms for modeling motion must be able to adapt in a dynamic way to motion model modiﬁcations. Furthermore, the occurrence of these events must be either predicted or detected, incurring further computational costs. Nevertheless, any truly useful model of motion must accommodate this on-line aspect of the temporal dimension, diﬀerentiating it from spatial dimensions, where all information is typically given at once. In real-world settings, the motion of objects may be imperfectly known and better information may only be obtainable at considerable expense. The model of data in motion of [37] assumes that upper bounds on the rates of change are known, and focuses on being selective in using sensing to obtain additional information about the objects, in order to answer a series of queries.

23.4

Kinetic Data Structures

Suppose we are interested in tracking high-level attributes of a geometric system of objects in motion such as, for example, the convex hull of a set on n points moving in R2 . Note that as the points move continuously, their convex hull will be a continuously evolving convex polygon. At certain discrete moments, however, the combinatorial structure of the convex hull will change (that is, the circular sequence of a subset of the points that appear on the hull will change). In between such moments, tracking the hull is straightforward: its geometry is determined by the positions of the sequence of points forming the hull. How can we know when the combinatorial structure of the hull changes? The idea is that we can focus on certain elementary geometric relations among the n points, a set of cached

© 2005 by Chapman & Hall/CRC

Kinetic Data Structures

23-3

assertions, which altogether certify the correctness of the current combinatorial structure of the hull. If we have short-term information about the motion of the points, then we can predict failures of these assertions in the near future. Furthermore, we can hope to choose these certifying relations in such a way so that when one of them fails because of point motion, both the hull and its set of certifying relations can be updated locally and incrementally, so that the whole process can continue. • Kinetic data structure: A kinetic data structure (KDS) for a geometric attribute is a collection of simple geometric relations that certiﬁes the combinatorial structure of the attribute, as well as a set of rules for repairing the attribute and its certifying relations when one relation fails. • Certiﬁcate: A certiﬁcate is one of the elementary geometric relations used in a KDS. • Motion plan: An explicit description of the motion of an object in the near future. • Event: An event is the failure of a KDS certiﬁcate during motion. If motion plans are available for all objects in a certiﬁcate, then the future time of failure for this certiﬁcate can be predicted. Events are classiﬁed as external when the combinatorial structure of the attribute changes, and internal, when the structure of the attribute remains the same, but its certiﬁcation needs to change. • Event queue: In a KDS, all certiﬁcates are placed in an event queue, according to their earliest failure time. The inner loop of a KDS consists of repeated certiﬁcate failures and certiﬁcation repairs, as depicted in Figure 23.1.

Certificate failure

Proof of correctness

Proof update

Attribute update

FIGURE 23.1: The inner loop of a kinetic data structure.

We remark that in the KDS framework, objects are allowed to change their motions at will, with appropriate notiﬁcation to the data structure. When this happens all certiﬁcates involving the object whose motion has changed must re-evaluate their failure times.

23.4.1

Convex Hull Example

Suppose we have four points a, b, c, and d in R2 , and wish to track their convex hull. For the convex hull problem, the most important geometric relation is the ccw predicate: ccw(a, b, c) asserts that the triangle abc is oriented counterclockwise. Figure 23.2 shows a conﬁguration of four points and four ccw relations that hold among them. It turns out that these four relations are suﬃcient to prove that the convex hull of the four points is the triangle abc. Indeed the points can move and form diﬀerent conﬁgurations, but as long as the four certiﬁcates shown remain valid, the convex hull must be abc.

© 2005 by Chapman & Hall/CRC

23-4

Handbook of Data Structures and Applications

c d

Proof of correctness:

b

• ccw(a, b, c)

a

• ccw(d, b, c) • ccw(d, c, a) • ccw(d, a, b) FIGURE 23.2: Determining the convex hull of the points.

Now suppose that points a, b, and c are stationary and only point d is moving with a known plan, as shown in Figure 23.3. At some time t1 the certiﬁcate ccw(d, b, c) will fail, and at a later time t2 ccw(d, a, b) will also fail. Note that the certiﬁcate ccw(d, c, a) will never fail in the conﬁguration shown even though d is moving. So the certiﬁcates ccw(d, b, c) and ccw(d, a, b) schedule events that go into the event queue. At time t1 , ccw(d, b, c) ceases to be true and its negation, ccw(c, b, d), becomes true. In this simple case the three old certiﬁcates, plus the new certiﬁcate ccw(c, b, d) allow us to conclude that convex hull has now changed to abdc.

Old proof

New proof

ccw(a, b, c)

ccw(a, b, c)

ccw(d, b, c)

ccw(c, b, d)

ccw(d, c, a)

ccw(d, c, a)

ccw(d, a, b)

ccw(d, a, b)

c

c t1 d a

d

t2 b

b a

FIGURE 23.3: Updating the convex hull of the points.

If the certiﬁcate set is chosen wisely, the KDS repair can be a local, incremental process— a small number of certiﬁcates may leave the cache, a small number may be added, and the new attribute certiﬁcation will be closely related to the old one. A good KDS exploits the continuity or coherence of motion and change in the world to maintain certiﬁcations that themselves change only incrementally and locally as assertions in the cache fail.

© 2005 by Chapman & Hall/CRC

Kinetic Data Structures

23.4.2

23-5

Performance Measures for KDS

Because a KDS is not intended to facilitate a terminating computation but rather an ongoing process, we need to use somewhat diﬀerent measures to assess its complexity. In classical data structures there is usually a tradeoﬀ between operations that interrogate a set of data and operations that update the data. We commonly seek a compromise by building indices that make queries fast, but such that updates to the set of indexed data are not that costly as well. Similarly in the KDS setting, we must at the same time have access to information that facilitates or trivializes the computation of the attribute of interest, yet we want information that is relatively stable and not so costly to maintain. Thus, in the same way that classical data structures need to balance the eﬃciency of access to the data with the ease of its update, kinetic data structures must tread a delicate path between “knowing too little” and “knowing too much” about the world. A good KDS will select a certiﬁcate set that is at once economical and stable, but also allows a quick repair of itself and the attribute computation when one of its certiﬁcates fails. • responsiveness: A KDS is responsive if the cost, when a certiﬁcate fails, of repairing the certiﬁcate set and updating the attribute computation is small. By “small” we mean polylogarithmic in the problem size—in general we consider small quantities that are polylogarithmic or O(n ) in the problem size. • eﬃciency: A KDS is eﬃcient if the number of certiﬁcate failures (total number of events) it needs to process is comparable to the number of required changes in the combinatorial attribute description (external events), over some class of allowed motions. Technically, we require that the ratio of total events to external events is small. The class of allowed motions is usually speciﬁed as the class of pseudo-algebraic motions, in which each KDS certiﬁcate can ﬂip between true and false at most a bounded number of times. • compactness: A KDS is compact if the size of the certiﬁcate set it needs is close to linear in the degrees of freedom of the moving system. • locality: A KDS is local if no object participates in too many certiﬁcates; this condition makes it easier to re-estimate certiﬁcate failure times when an object changes its motion law. (The existence of local KDSs is an intriguing theoretical question for several geometric attribute functions.)

23.4.3

The Convex Hull, Revisited

We now brieﬂy describe a KDS for maintaining the convex hull of n points moving around in the plane [16]. The key goal in designing a KDS is to produce a repairable certiﬁcation of the geometric object we want to track. In the convex hull case it turns out that it is a bit more intuitive to look at the dual problem, that of maintaining the upper (and lower) envelope of a set of moving lines in the plane, instead of the convex hull of the primal points. Such dualities represent a powerful toolkit in computational geometry; readers are referred to any standard computational geometry textbook for details, for example [21]. For simplicity we focus only on the upper envelope of the moving lines from now on; the lower envelope case is entirely symmetric. Using a standard divide-and-conquer approach, we partition our lines into two groups of size roughly n/2 each, and assume that recursive invocations of the algorithm maintain the upper envelopes of these groups. For convenience call the groups red and blue. In order to produce the upper envelope of all the lines, we have to merge the upper envelopes of the red and blue groups and also certify this merge, so we can detect when it

© 2005 by Chapman & Hall/CRC

23-6

Handbook of Data Structures and Applications

ceases to be valid as the lines move; see Figure 23.4.

FIGURE 23.4: Merging the red and blue upper envelopes. In this example, the red envelope (solid line) is above the blue (dotted line), except at the extreme left and right areas. Vertical double-ended arrows represent y-certiﬁcates and horizontal double-ended arrows represent x-certiﬁcates, as described below.

Conceptually, we can approach this problem by sweeping the envelopes with a vertical line from left to right. We advance to the next red (blue) vertex and determine if it is above or below the corresponding blue (red) edge, and so on. In this process we determine when red is above blue or vice versa, as well as when the two envelopes cross. By stitching together all the upper pieces, whether red or blue, we get a representation of the upper envelope of all the lines. The certiﬁcates used in certifying the above merge are of three ﬂavors: • x-certiﬁcates (<x ) are used to certify to x-ordering among the red and blue vertices; these involve four original lines. • y-certiﬁcates (
© 2005 by Chapman & Hall/CRC

Kinetic Data Structures

23-7

e

d

c

a b

a b e

d

e

d

c

a

ab<x de de<x bc

x-ordering certiﬁcates

ab
intersection certiﬁcates

d<s b b<s e b
non-intersection certiﬁcates

b

FIGURE 23.5: Using the diﬀerent types of certiﬁcates to certify the red-blue envelope merge. f f d

e a d

a

e

b

b

FIGURE 23.6: Envelope repair after a certiﬁcate failure. In the event shown lines b, d, and e become concurrent, producing a red-blue envelope intersection envelopes [3] it can be shown that in the worst case the number of events processed by this algorithm is near quadratic (O(n2+ )). Since the convex hull of even linearly moving points can change Ω(n2 ) times [8], the eﬃciency result follows. No comparable structure is known for the convex hull of points in dimensions d ≥ 3.

23.5

A KDS Application Survey

Even though we have presented kinetic data structures in a geometric setting, there is nothing intrinsically geometric about KDS. The idea of cached assertions that help track an attribute of interest can be applied to many other settings where there is continuous evolution over time punctuated by discrete events, beyond motion in the physical world. For example, consider a graph whose edge weights or capacities are functions of time, as might arise in an evolving communications network. Then the problem of tracking various substructures of interest, such as the minimum spanning tree (MST) of the graph, or a shortest path tree form a source node, can be formulated and studied within the KDS framework. We present below a quick summary of some of the areas to which kinetic data structures

© 2005 by Chapman & Hall/CRC

23-8

Handbook of Data Structures and Applications

have been applied so far. The are mostly geometric in nature, but several non-geometric examples appear as well.

23.5.1

Extent Problems

A number of the original problems for which kinetic data structures were developed are aimed at diﬀerent measures of how “spread out” a moving set of points in R2 is—one example is the convex hull, whose maintenance was discussed in the previous subsection. Other measures of interest include the diameter, width, and smallest area or perimeter bounding rectangle for a moving set S of n points. All these problems can be solved using the kinetic convex hull algorithm above; the eﬃciency of the algorithms is O(n2+ ), for any > 0. There are also corresponding Ω(n2 ) lower bounds for the number of combinatorial changes in these measures. Surprisingly, the best known upper bound for maintaining the smallest enclosing disk containing S is still near-cubic. Extensions of these results to dimensions higher than two are also lacking. These costs can be dramatically reduced if we consider approximate extent measures. If we are content with (1 + ) approximations to the measures, then an approximate smallest orthogonal rectangle, diameter, and smallest enclosing disk can be maintained with a number of events that is a function only and not of n [9]. For example, the bound of the number of approximate diameter updates in R2 under linear motion of the points is O(1/).

23.5.2

Proximity Problems

The fundamental proximity structures in computational geometry are the Voronoi Diagram and the Delaunay triangulation (Chapters 62 and 63). The edges of the Delaunay triangulation contain the closest pair of points, the closest neighbor to each point, as well as a wealth of other proximity information among the points. From the kinetic point of view, these are nice structures, because they admit completely local certiﬁcations. Delaunay’s 1934 theorem [22] states that if a local empty sphere condition is valid for each (d−1)simplex in a triangulation of points in Rd , then that triangulation must be Delaunay. This makes it simple to maintain a Delaunay triangulation under point motion: an update is necessary only when one of these empty sphere conditions fails. Furthermore, whenever that happens, a local retiling of space (of which the classic “edge-ﬂip” in R2 is a special case) easily restores Delaunayhood. Thus the KDS for Delaunay (and Voronoi) that follows from this theorem is both responsive and eﬃcient—in fact, each KDS event is an external event in which the structure changes. Though no redundant events happen, an exact upper bound for the total number of such events in the worst-case is still elusive even in R2 , where the best known upper bound is nearly cubic, while the best lower bound only quadratic [12]. This principle of a set of easily checked local conditions that implies a global property has been used in kinetizing other proximity structures as well. For instance, in the power diagram [14] of a set of disjoint balls, the two closest balls must be neighbors [31]—and this diagram can be kinetized by a similar approach. Voronoi diagrams of more general objects, such as convex polytopes, have also been investigated. For example, in R2 [29] shows how to maintain a compact Voronoi-like diagram among moving disjoint convex polygons; again, a set of local conditions is derived which implies the global correctness of this diagram. As the polygons move, the structure of this diagram allows one to know the nearest pair of polygons at all times. In many applications the exact L2 -distance between objects is not needed and more relaxed notions of proximity suﬃce. Polyhedral metrics (such as L1 or L∞ ) are widely used, and the normal unit ball in L2 can be approximated arbitrarily closely by polyhedral

© 2005 by Chapman & Hall/CRC

Kinetic Data Structures

23-9

approximants. It is more surprising, however, that if we partition the space around each point into a set of polyhedral cones and maintain a number of directional nearest neighbors to each point in each cone, then we can still capture the globally closest pair of points in the L2 metric. By directional neighbors here we mean that we measure distance only along a given direction in that cone. This geometric fact follows from a packing argument and is exploited in [17] to give a diﬀerent method for maintaining the closest pair of points in Rd . The advantage of this method is that the kinetic events are changes of the sorted order of the points along a set of directions ﬁxed a priori, and therefore the total number of events is provably quadratic.

23.5.3

Triangulations and Tilings

Many areas in scientiﬁc computation and physical modeling require the maintenance of a triangulation (or more generally a simplicial complex) that approximates a manifold undergoing deformation. The problem of maintaining the Delaunay triangulation of moving points in the plane mentioned above is a special case. More generally, local re-triangulations are necessitated by collapsing triangles, and sometimes required in order to avoid undesirably “thin” triangles. In certain cases the number of nodes (points) may also have to change in order to stay suﬃciently faithful to the underlying physical process; see, for example, [18]. Because in general a triangulation meeting certain criteria is not unique or canonical, it becomes more diﬃcult to assess the eﬃciency of kinetic algorithms for solving such problems. The lower-bound results in [4] indicate that one cannot hope for a subquadratic bound on the number of events in the worst case in the maintenance an any triangulation, even if a linear number of additional Steiner points is allowed. There is large gap between the desired quadratic upper bound and the current state of art. Even for maintaining an arbitrary triangulation of a set of n points moving linearly in the plane, the best-known algorithm processes O(n7/3 ) events [5] in the worst case. The algorithm actually maintains a pseudotriangulation of the convex hull of the point set and then a triangulation of each pseudotriangle. Although there are only O(n2 ) events in the pseudotriangulation, some of the events change too many triangles because of high-degree vertices. Unless additional Steiner points are allowed, there are point conﬁgurations for which high-degree vertices are inevitable and therefore some of the events will be expensive. A more clever, global argument is needed to prove a near-quadratic upper bound on the total number of events in the above algorithm. Methods that choose to add additional points, on the other hand, have the burden of deﬁning appropriate trajectories for these Steiner points as well. Finally, today no triangulation that guarantees certain quality on the shapes of triangles as well as a subcubic bound on the number of retiling events is known.

23.5.4

Collision Detection

Kinetic methods are naturally applicable to the problem of collision detection between moving geometric objects. Typically collisions occur at irregular intervals, so that ﬁxedtime stepping methods have diﬃculty selecting an appropriate sampling rate to ﬁt both the numerical requirements of the integrator as well as those of collision detection. A kinetic method based on the discrete events that are the failures of relevant geometric conditions can avoid the pitfalls of both oversampling and undersampling the system. For two moving convex polygons in the plane, a kinetic algorithm where the number of events is a function of the relative separation of the two polygons is given in [23]. The algorithm is based on constructing certain outer hierarchies on the two polygons. Analogous methods for 3D polytopes were presented in [30], together with implementation data.

© 2005 by Chapman & Hall/CRC

23-10

Handbook of Data Structures and Applications

(i)

(ii)

(iii)

(iv)

FIGURE 23.7: Snapshots of the mixed pseudotriangulation of [5]. As the center trapezoidlike polygon moves to the right, the edges corresponding to the next about-to-fail certiﬁcate are highlighted.

A tiling of the free space around objects can serve as a proof of non-intersection of the objects. If such a tiling can be eﬃciently maintained under object motion, then it can be the basis of a kinetic algorithm for collision detection. Several papers have developed techniques along these lines, including the case of two moving simple polygons in the plane [15], or multiple moving polygons [5, 38]. These developments all exploit deformable pseudotriangulations of the free space—tilings which undergo fewer combinatorial changes than, for example, triangulations. An example from [5] is shown in Figure 23.7. The ﬁgure shows how the pseudotriangulation adjusts by local retiling to the motion of the inner quadrilateral. The approach of [5] maintains a canonical pseudotriangulation, while others are based on letting a pseudotriangulation evolve according to the history of the motion. It is unclear at this point which is best. An advantage of all these methods is that the number of certiﬁcates needed is close to size of the min-link separating subdivision of the objects, and thus sensitive to how intertwined the objects are. Deformable objects are more challenging to handle. Classical methods, such as bounding volume hierarchies [27], become expensive, as the ﬁxed object hierarchies have to be rebuilt frequently. One possibility for mitigating this cost is to let the hierarchies themselves deform continuously, by having the bounding volumes deﬁned implicitly in terms of object features. Such an approach was developed for ﬂexible linear objects (such as rope or macromolecules), using combinatorially deﬁned sphere hierarchies in [28]. In that work a bounding sphere is deﬁned not in the usual way, via its center and radius, but in an implicit combinatorial way, in terms of four feature points of the enclosed object geometry. As the object deforms these implicitly deﬁned spheres automatically track their assigned features, and therefore the deformation. Of course the validity of the hierarchy has to be checked at each time step and repaired if necessary. What helps here is that the implicitly deﬁned spheres change

© 2005 by Chapman & Hall/CRC

Kinetic Data Structures

23-11

their combinatorial description rather infrequently, even under extreme deformation. An example is shown in Figure 23.8 where the rod shown is bent substantially, yet only the top-level sphere needs to update its description.

FIGURE 23.8: A thin rod bending from a straight conﬁguration, and a portion of its associated bounding sphere hierarchy. The combinatorially deﬁned sphere hierarchy is stable under deformation. Only the top level sphere diﬀers between the two conformations.

The pseudotriangulation-based methods above can also be adapted to deal with object deformation.

23.5.5

Connectivity and Clustering

Closely related to proximity problems is the issue of maintaining structures encoding connectivity among moving geometric objects. Connectivity problems arise frequently in ad hoc mobile communication and sensor networks, where the viability of links may depend on proximity or direct line-of-sight visibility among the stations desiring to communicate. With some assumptions, the communication range of each station can be modeled by a geometric region, so that two stations can establish a link if and only if their respective regions overlap. There has been work on kinetically maintaining the connected components of the union of a set of moving geometric regions for the case of rectangles [36] and unit disks [33]. Clustering mobile nodes is an essential step in many algorithms for establishing communication hierarchies, or otherwise structuring ad hoc networks. Nodes in close proximity can communicate directly, using simpler protocols; correspondingly, well-separated clusters can reuse scarce resources, such the same frequency or time-division multiplexing communication scheme, without interference. Maintaining clusters of mobile nodes requires a tradeoﬀ between the tightness, or optimality of the clustering, and its stability under motion. In [26] a randomized clustering scheme is discussed based on an iterated leader-election algorithm that produces a number of clusters within a constant factor of the optimum, and in which the number of cluster changes is also asymptotically optimal. This scheme was used in [25] to maintain a routing graph on mobile nodes that is always sparse and in which communication paths exist that are nearly as good as those in the full communication graph. Another fundamental kinetic question is the maintenance of a minimum spanning tree (MST) among n mobile points in the plane, closely related to earlier work on parametric spanning trees [24] in a graph whose edge weights are functions of a parameter λ (λ is time in

© 2005 by Chapman & Hall/CRC

23-12

Handbook of Data Structures and Applications

the kinetic setting). Since the MST is determined by the sorted order of the edge weights in the graph, a simple algorithm can be obtained by maintaining the sorted list of weights and some auxiliary data structures (such an algorithm is quadratic in the graph size, or O(n4 ) in our case). This was improved when the weights are linear functions of time to nearly O(n11/6 ) (subquadratic) for planar graphs or other minor-closed families [6]. When the weights are the Euclidean distances between moving points, only approximation algorithms are known and the best event bounds are nearly cubic [17]. For many other optimization problems on geometric graphs, such as shortest paths for example, the corresponding kinetic questions are wide open.

23.5.6

Visibility

The problem of maintaining the visible parts of the environment when an observer is moving is one of the classic questions in computer graphics and has motivated signiﬁcant developments, such as binary space partition trees, the hardware depth buﬀer, etc. The diﬃculty of the question increases signiﬁcantly when the environment itself includes moving objects; whatever visibility structures accelerate occlusion culling for the moving observer, must now themselves be maintained under object motion. Binary space partitions (BSP) are hierarchical partitions of space into convex tiles obtained by performing planar cuts (Chapter 20). Tiles are reﬁned by further cuts until the interior of each tile is free of objects or contains geometry of limited complexity. Once a BSP tree is available, a correct visibility ordering for all geometry fragments in the tiles can be easily determined and incrementally maintained as the observer moves. A kinetic algorithm for visibility can be devised by maintaining a BSP tree as the objects move. The key insight is to certify the correctness of the BSP tree through certain combinatorial conditions, whose failure triggers localized tree rearrangements — most of the classical BSP construction algorithms do not have this property. In R2 , a randomized algorithm for maintaining a BSP of moving disjoint line segments is given in [11]. The algorithm processes O(n2 ) events, the expected cost per tree update is O(log n), and the expected tree size is O(n log n). The maintenance cost increases to O(nλs+2 (n) log2 n) [7] for disjoint moving triangles in R3 (s is a constant depending on the triangle motion). Both of these algorithms are based on variants on vertical decompositions (many of the cuts are parallel to a given direction). It turns out that in practice these generate “sliver-like” BSP tiles that lead to robustness issues [19]. As the pioneering work on the visibility complex has shown [40], another structure that is well suited to visibility queries in R2 is an appropriate pseudotriangulation. Given a moving observer and convex moving obstacles, a full radial decomposition of the free space around the observer is quite expensive to maintain. One can build pseudotriangulations of the free space that become more and more like the radial decomposition as we get closer to the observer. Thus one can have a structure that compactly encodes the changing visibility polygon around the observer, while being quite stable in regions of the free space welloccluded from the observer [39].

23.5.7

Result Summary

We summarize in Table 23.9 the eﬃciency bounds on the main KDSs discussed above.

© 2005 by Chapman & Hall/CRC

Kinetic Data Structures

23-13 STRUCTURE Convex hull Pseudotriangulation Triangulation (arb.) MST BSP

BOUNDS ON EVENTS 2+

Ω(n ) O(n2 ) 7/3 Ω(n ) O(n11/6 log3/2 n) ˜ 2) O(n

SOURCE [16] [5] [5] [6] [7, 11]

FIGURE 23.9: Bounds on the number of combinatorial changes.

23.5.8

Open Problems

As mentioned above, we still lack eﬃcient kinetic data structures for many fundamental geometric questions. Here is a short list of such open problems: 1. Find an eﬃcient (and responsive, local, and compact) KDS for maintaining the convex hull of points moving in dimensions d ≥ 3. 2. Find an eﬃcient KDS for maintaining the smallest enclosing disk in d ≥ 2. For d = 2, a goal would be an O(n2+ ) algorithm. 3. Establish tighter bounds on the number of Voronoi diagram events, narrowing the gap between quadratic and near-cubic. 4. Obtain a near-quadratic bound on the number of events maintaining an arbitrary triangulation of linearly moving points.∗ 5. Maintain a kinetic triangulation with a guarantee on the shape of the triangles, in subcubic time. 6. Find a KDS to maintain the MST of moving points under the Euclidean metric achieving subquadratic bounds. Beyond speciﬁc problems, there are also several important structural issues that require further research in the KDS framework. These include: Recovery after multiple certiﬁcate failures.

We have assumed up to now that the KDS assertion cache is repaired after each certiﬁcate failure. In many realistic scenarios, however, it is impossible to predict exactly when certiﬁcates will fail because explicit motion descriptions may not be available. In such settings we may need to sample the system and thus we must be prepared to deal with multiple (but hopefully few) certiﬁcate failures at each time step. A general area of research that this suggests is the study of how to eﬃciently update common geometric structures, such as convex hulls, Voronoi and Delaunay diagrams, arrangements, etc., after “small motions” of the deﬁning geometric objects. There is also a related subtlety in the way that a KDS assertion cache can certify the value, or a computation yielding the value, of the attribute of interest. Suppose our goal is to certify that a set of moving points in the plane, in a given circular order, always form a convex polygon. A plausible certiﬁcate set for convexity is that all interior angles of the polygon are convex. See Figure 23.10. In the normal KDS setting where we can always

∗ While this handbook was going to print, Agarwal, Wang and Yu, gave a near-quadratic such algorithm [44].

© 2005 by Chapman & Hall/CRC

23-14

Handbook of Data Structures and Applications

predict accurately the next certiﬁcate failure, it turns out that the above certiﬁcate set is suﬃcient, as long as at the beginning of the motion the polygon was convex. One can draw, however, nonconvex self-intersecting polygons all of whose interior angles are convex, as also shown in the same ﬁgure. The point here is that a standard KDS can oﬀer a historical proof of the convexity of the polygon by relying on the fact that the certiﬁcate set is valid and that the polygon was convex during the prior history of the motion. Indeed the counterexample shown cannot arise under continuous motion without one of the angle certiﬁcates failing ﬁrst. On the other hand, if an oracle can move the points when “we are not looking,” we can wake up and ﬁnd all the angle certiﬁcates to be valid, yet our polygon need not be convex. Thus in this oracle setting, since we cannot be sure that no certiﬁcates failed during the time step, we must insist on absolute proofs — certiﬁcate sets that in any state of the world fully validate the attribute computation or value.

FIGURE 23.10: Certifying the convexity of a polygon.

Hierarchical motion descriptions.

Objects in the world are often organized into groups and hierarchies and the motions of objects in the same group are highly correlated. For example, though not all points in an elastic bouncing ball follow exactly the same rigid motion, the trajectories of nearby points are very similar and the overall motion is best described as the superposition of a global rigid motion with a small local deformation. Similarly, the motion of an articulated ﬁgure, such as a man walking, is most succinctly described as a set of relative motions, say that of the upper right arm relative to the torso, rather than by giving the trajectory of each body part in world coordinates. What both of these examples suggest is that there can be economies in motion description, if the motion of objects in the environment can be described as a superposition of terms, some of which can be shared among several objects. Such hierarchical motion descriptions can simplify certiﬁcate evaluations, as certiﬁcates are often local assertions concerning nearby objects, and nearby objects tend to share motion components. For example, in a simple articulated ﬁgure, we may wish to assert ccw(A, B, C) to indicate that an arm is not fully extended, where AB and BC are the upper and lower parts of the arm respectively. Evaluating this certiﬁcate is clearly better done in the local coordinate frame of the upper arm than in a world frame—the redundant motions of the legs and torso have already been factored out. Motion sensitivity.

As already mentioned, the motions of objects in the world are often highly correlated and it behooves us to ﬁnd representations and data structures that exploit such motion coherence. It is also important to ﬁnd mathematical measures that capture the degree of

© 2005 by Chapman & Hall/CRC

Kinetic Data Structures

23-15

coherence of a motion and then use this as a parameter to quantify the performance of motion algorithms. If we do not do this, our algorithm design may be aimed at unrealistic worst-case behavior, without capturing solutions that exploit the special structure of the motion data that actually arise in practice — as already discussed in a related setting in [20]. Thus it is important to develop a class of kinetic motion-sensitive algorithms, whose performance can be expressed a function of how coherent the motions of the underlying objects are. Non-canonical structures.

The complexity measures for KDSs mentioned earlier are more suitable for maintaining canonical geometric structures, which are uniquely deﬁned by the position of the data, e.g., convex hull, closest pair, and Delaunay triangulation. In these cases the notion of external events is well deﬁned and is independent of the algorithm used to maintain the structure. On the other hand, as we already discussed, suppose we want to maintain a triangulation of a moving point set. Since the triangulation of a point set is not unique, the external events depend on the triangulation being maintained, and thus depend on the algorithm. This makes it diﬃcult to analyze the eﬃciency of a kinetic triangulation algorithm. Most of the current approaches for maintaining noncanonical structures artiﬁcially impose canonicality and maintain the resulting canonical structure. But this typically increases the number of events. So it is entirely possible that methods in which the current form of the structure may depend on its past history can be more eﬃcient. Unfortunately, we lack mathematical techniques for analyzing such history-dependent structures.

23.6

Querying Moving Objects

Continuous tracking of a geometric attribute may be more than is needed for some applications. There may be time intervals during which the value of the attribute is of no interest; in other scenarios we may be just interested to know the attribute value at certain discrete query times. For example, given n moving points in R2 , we may want to pose queries asking for all points inside a rectangle R at time t, for various values of R and t, or for an interval of time ∆t, etc. Such problems can be handled by a mixture of kinetic and static techniques, including standard range-searching tools such as partition trees and range trees [21]. They typically involve tradeoﬀs between evolving indices kinetically, or prebuilding indices for static snapshots. An especially interesting special case is when we want to be able answer queries about the near future faster than those about the distant future—a natural desideratum in many real-time applications. A number of other classical range-searching structures, such as k-d-trees and R-trees have recently been investigated for moving objects [1, 2].

23.7

Sources and Related Materials

Results not given an explicit reference above may be traced in these surveys. [32]: An early, and by now somewhat dated, survey of KDS work. [10]: A report based on an NSF-ARO workshop, addressing several issues on modeling motion from the perspective of a variety of disciplines. [34]: A “popular-science” type article containing material related to the costs of sensing and communication for tracking motion in the real world.

© 2005 by Chapman & Hall/CRC

23-16

Handbook of Data Structures and Applications

References [1] P. Agarwal, J. Gao, and L. Guibas. Kinetic medians and kd-trees. In Proc. 10-th Europ. Symp. on Algorithms (ESA), pages 5–16, 2002. [2] P. Agarwal, S. Har-Peled, and M. Procopiuc. Star-tree: An eﬃcent self-adjusting index for moving points. In Workshop on Algorithms Engineering, 2002. [3] P. K. Agarwal, O. Schwarzkopf, and Micha Sharir. The overlay of lower envelopes and its applications. Discrete Comput. Geom., 15:1–13, 1996. [4] Pankaj K. Agarwal, J. Basch, Mark de Berg, L. J. Guibas, and J. Hershberger. Lower bounds for kinetic planar subdivisions. In Proc. 15-th Annu. ACM Sympos. Comput. Geom. (SoCG), pages 247–254, 1999. [5] Pankaj K. Agarwal, J. Basch, L. J. Guibas, J. Hershberger, and L. Zhang. Deformable free space tiling for kinetic collision detection. In Fourth Workshop on Algorithmic Foundations of Robotics (WAFR), pages 83–96, 2000. [6] Pankaj K. Agarwal, D. Eppstein, L. J. Guibas, and M. Henzinger. Parametric and kinetic minimum spanning trees. In Proc. 39th Annu. IEEE Sympos. Found. Comput. Sci., pages 596–605, 1998. [7] Pankaj K. Agarwal, Jeﬀ Erickson, and Leonidas J. Guibas. Kinetic BSPs for intersecting segments and disjoint triangles. In Proc. 9th ACM-SIAM Sympos. Discrete Algorithms, pages 107–116, 1998. [8] Pankaj K. Agarwal, Leonidas J. Guibas, John Hershberger, and Eric Veach:. Maintaining the extent of a moving point set. Discrete and Computational Geometry, 26(3):353–374, 2001. [9] Pankaj K. Agarwal and Sariel Har-Peled. Maintaining approximate extent measures of moving points. In Proc.12th ACM-SIAM Sympos. Discrete Algorithms (SODA), pages 148–157, 2001. [10] P.K. Agarwal, L.J. Guibas, et al. Algorithmic issues in modeling motion. ACM Computing Surveys, 34(4):550–572, 2003. [11] P.K. Agarwal, L.J. Guibas, T.M. Murali, and J.S. Vitter. Cylindrical static and kinetic binary space partitions. Comp. Geometry, Theory and Appl., 16:103–127, 2000. [12] G. Albers, Leonidas J. Guibas, Joseph S. B. Mitchell, and T. Roos. Voronoi diagrams of moving points. Internat. J. Comput. Geom. Appl., 8:365–380, 1998. [13] M. J. Atallah. Some dynamic computational geometry problems. Comput. Math. Appl., 11(12):1171–1181, 1985. [14] F. Aurenhammer. Power diagrams: properties, algorithms and applications. SIAM J. Comput., 16:78–96, 1987. [15] J. Basch, J. Erickson, L. J. Guibas, J. Hershberger, and L. Zhang. Kinetic collision detection between two simple polygons. In Proc. 10-th ACM-SIAM Sympos. Discrete Algorithms (SODA), pages 327–336, 1999. [16] J. Basch, L. J. Guibas, and J. Hershberger. Data structures for mobile data. Journal of Algorithms, 31:1–28, 1999. [17] J. Basch, L. J. Guibas, and L. Zhang. Proximity problems on moving points. In Proc. 13th Annu. ACM Sympos. Comput. Geom., pages 344–351, 1997. [18] H.L. Cheng, Tamal K. Dey, Herbert Edelsbrunner, and John Sullivan. Dynamic skin triangulation. In Proc. 12-th SIAM Symposium on Discrete Algorithms (SODA), pages 47–56, 2001. [19] J.L.D. Comba. Kinetic vertical decomposition trees. PhD thesis, Stanford University, 1999. [20] M. de Berg, M. J. Katz, A. F. van der Stappen, and J. Vleugels. Realistic input models for geometric algorithms. In Proc. 13th Annu. ACM Sympos. Comput. Geom., pages

© 2005 by Chapman & Hall/CRC

Kinetic Data Structures

23-17

294–303, 1997. [21] Mark de Berg, Marc van Kreveld, Mark Overmars, and Otfried Schwarzkopf. Computational Geometry: Algorithms and Applications. Springer-Verlag, Berlin, Germany, 2nd edition, 2000. [22] B. Delaunay. Sur la sph`ere vide. A la memoire de Georges Voronoi. Izv. Akad. Nauk SSSR, Otdelenie Matematicheskih i Estestvennyh Nauk, 7:793–800, 1934. [23] J. Erickson, L. J. Guibas, J. Stolﬁ, and L. Zhang. Separation-sensitive collision detection for convex objects. In Proc. 10-th ACM-SIAM Symp. Discrete Algorithms (SODA), pages 102–111, 1999. [24] D. Fern` andez-Baca, G. Slutzki, and D. Eppstein. Using sparsiﬁcation for parametric minimum spanning tree problems. Nordic Journal of Computing, 3:352–366, 1996. [25] J. Gao, L. J. Guibas, J. Hershberger, L. Zhang, and A. Zhu. Geometric spanner for routing in mobile networks. In Proc. 2n-d ACM Symp. on Ad-Hoc Networking and Computing MobiHoc), pages 45–55, Oct. 2001. [26] J. Gao, L.J. Guibas, J. Hershberger, L. Zhang, and A. Zhu. Discrete mobile centers. In Proc. 17-th ACM Symp. on Computational Geometry (SoCG), pages 190–198, Jun 2001. [27] Stefan Gottschalk, Ming Lin, and Dinesh Manocha. OBB-Tree: A hierarchical structure for rapid interference detection. In SIGGRAPH 96 Conference Proceedings, pages 171–180, 1996. [28] L. Guibas, A. Nguyen, D. Russell, and L. Zhang. Collision detection for deforming necklaces. In Proc. 18-th Annu. ACM Sympos. Comput. Geom. (SoCG), pages 33–42, 2002. [29] L. Guibas, J. Snoeyink, and L. Zhang. Compact Voronoi diagrams for moving convex polygons. In Proc. Scand. Workshop on Alg. and Data Structures (SWAT), volume 1851 of Lecture Notes Comput. Sci., pages 339–352. Springer-Verlag, 2000. [30] L. Guibas, F. Xie, and L. Zhang. Kinetic collision detection: Algorithms and experiments. In Proceedings of the International Conference on Robotics and Automation (ICRA), pages 2903–2910, 2001. [31] L. Guibas and L. Zhang. Euclidean proximity and power diagrams. In Proc. 10-th Canadian Conf. Computational Geometry, pages 90–91, 1998. [32] L. J. Guibas. Kinetic data structures — a state of the art report. In P. K. Agarwal, L. E. Kavraki, and M. Mason, editors, Proc. Workshop Algorithmic Found. Robot., pages 191–209. A. K. Peters, Wellesley, MA, 1998. [33] Leonidas Guibas, John Hershberger, Subash Suri, and Li Zhang. Kinetic connectivity for unit disks. In Proc. 16th Annu. ACM Sympos. Comput. Geom., pages 331–340, 2000. [34] Leonidas J. Guibas. Sensing, tracking, and reasoning with relations. IEEE Signal Proc. Magazine, pages 73–85, 2002. [35] P. Gupta, R. Janardan, and M. Smid. Fast algorithms for collision and proximity problems involving moving geometric objects. Comput. Geom. Theory Appl., 6:371– 391, 1996. [36] J. Hershberger and S. Suri. Kinetic connectivity of rectangles. In Proc. 15-th Annu. ACM Sympos. Comput. Geom. (SoCG), pages 237–246, 1999. [37] S. Kahan. A model for data in motion. In Proc. 23th Annu. ACM Sympos. Theory Comput., pages 267–277, 1991. [38] David Kirkpatrick, Jack Snoeyink, and Bettina Speckmann. Kinetic collision detection for simple polygons. In Proc. 16th Annu. ACM Sympos. Comput. Geom., pages 322– 330, 2000. [39] O.Hall-Holt. Kinetic visibility. PhD thesis, Stanford University, 2002.

© 2005 by Chapman & Hall/CRC

23-18

Handbook of Data Structures and Applications

[40] M. Pocchiola and G. Vegter. The visibility complex. Internat. J. Comput. Geom. Appl., 6(3):279–308, 1996. [41] Elmar Sch¨ omer and Christian Thiel. Eﬃcient collision detection for moving polyhedra. In Proc. 11th Annu. ACM Sympos. Comput. Geom., pages 51–60, 1995. [42] Elmar Sch¨ omer and Christian Thiel. Subquadratic algorithms for the general collision detection problem. In Abstracts 12th European Workshop Comput. Geom., pages 95–101. Universit¨ at M¨ unster, 1996. [43] Micha Sharir. Almost tight upper bounds for lower envelopes in higher dimensions. Discrete Comput. Geom., 12:327–345, 1994. [44] P. Agarwal, Y. Wang, and H. Yu. A 2d kinetic triangulation with near quadratic topological changes. Proc. 20th ACM Symp. on Computational Geometry (SoCG), 180–189, 2004.

© 2005 by Chapman & Hall/CRC

24 Online Dictionary Structures

Teoﬁlo F. Gonzalez University of California, Santa Barbara

24.1

24.1 24.2 24.3 24.4 24.5 24.6

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-1 Trie Implementations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-2 Binary Search Tree Implementations . . . . . . . . . . . . 24-5 Balanced BST Implementation . . . . . . . . . . . . . . . . . . . 24-7 Additional Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-10 Discussion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-10

Introduction

Given an initially empty set S, the dictionary problem consists of executing on-line any sequence of operations of the form S.membership(s), S.insert(s) and S.delete(s), where each element s is an object (or point in one dimensional space). Each object can be stored in a single word, and it takes O(1) time to save and/or retrieve it. The set may be represented by using arrays (sorted or unsorted), linked lists (sorted or unsorted), hash tables, binary search trees, AVL-trees, B-trees, 2-3 trees, weighted balanced trees, or balanced binary search trees (i.e., 2-3-4 trees,symmetric B-trees, half balanced trees or red-black trees). The worst case time complexity for performing each of these operations is O(log n), where n is the maximum number of elements in a set, when using AVL-trees, B-trees (ﬁxed order), 2-3 trees, weighted balanced trees, or balanced binary search trees. See Chapters 2, 3, 9, 10 and 15 for details on these structures. The insertion or deletion of elements in these structures requires a set of operations to preserve certain properties of the resulting trees. For binary search trees, these operations are called rotations, and for m-way search trees they are called splitting or combining nodes. The balanced binary search trees are the only trees that require a constant number of rotations for both the insert and delete operations [13, 15]. In this chapter we discuss several algorithms [4, 5] for the generalized dictionary problem when the data is multidimensional, rather than one dimensional. Each data element consists of d ordered components which we call ordered d-tuple, or simply d-tuple. Each component contains a value which can be stored in a memory word and which can be compared against another value to determine whether the values are identical, the ﬁrst value is larger than the second one, or the ﬁrst value is smaller than the second one. The comparison operation takes a constant amount of time. We show that the multidimensional dictionary operations can be implemented to take O(d + log n), where n is the number of d-tuples in the set. We also show that other common operations can also be executed within the same time complexity bounds. Let us now discuss one of the applications of multidimensional dictionaries. We are given a set of n points in multidimensional space and an integer D, and the problem is

24-1

© 2005 by Chapman & Hall/CRC

24-2

Handbook of Data Structures and Applications

to ﬁnd the least number of orthogonal hypersquares (or d-boxes) of size D to cover all the points, i.e., each of the points must be in at least one of the d-boxes. This covering problem arises in image processing, and in locating emergency facilities so that all users are within a reasonable distance of one of the facilities [3]. This covering problem has been shown to be NP-hard and several polynomial time approximation schemes for its solution have been developed [3]. The simplest approximation algorithm deﬁnes d-boxes along a multidimensional grid with grid d-boxes of length D. The approximation algorithm takes every d-dimensional point and by using simple arithmetic operations, including the ﬂoor function, ﬁnds its appropriate (grid) d-box. The d-box, which is characterized by d integer components, is inserted into a multidimensional dictionary and the operation is repeated for each d-dimensional point. Then one just visits all the d-tuples in the set and the d-boxes they represent are part of the solution generated by this simple approximation algorithm. Note that when a d-tuple is inserted into a multidimensional dictionary that contains it, the d-tuple will not modify the dictionary because dictionaries store sets, i.e., multiple copies of the d-tuples are not allowed. Other application of multidimensional dictionaries are when accessing multi-attribute data by value. These applications include the management of geometrical objects and the solution of geometry search problems. Given the d-tuple s in set S, one may access in constant time the ith element in the d-tuple by using the function s.x(i). In other words, the d-tuple s is simply (s.x(1), s.x(2), . . . , s.x(d)) In this chapter we examine the methods given in [4, 5] to represent the data set and their algorithms to perform on-line any sequence of the multidimensional dictionary operations. The most eﬃcient of the implementations performs each of the three dictionary operations in O(d + log n) time, where n is the number of d-tuples, and d is the number of dimensions. Each of the insert and delete operations requires no more than a constant number of rotations. The best of the algorithms requires dn words to represent the d-tuples, plus O(n) additional space is required to keep additional pointers and data. Because we are using balanced binary search trees, we can also perform other operations eﬃciently. For example, ﬁnd the (lexicographically) smallest or largest d-tuple (O(log n) time), print in lexicographic order (O(dn) time), and concatenation (O(d + log n) time). By modifying slightly the representation and introducing additional information, one can also ﬁnd the (lexicographically) k th smallest or largest d-tuple in (O(log n) time). In Section 24.5 we show that the structure given in [5] may also be used to implement the split operation in O(d + log n) time, and that the approach can also be used in other balanced binary search trees, like AVL, weight balanced, etc.

24.2

Trie Implementations

It is interesting to note that two decades ago balanced structures were written oﬀ for this type of applications. As noted in [12], “balanced tree schemes based on key comparisons (e.g., AVL-trees, B-trees, etc.) lose some of their usefulness in this more general context”. At that time the approach was to use tries in conjunction with balanced tree schemes to represent multidimensional data. Given a set of strings over an alphabet Σ, the tree of all their preﬁxes is called a trie (Chapter 28). In Figure 24.1 we depict the trie for the set of strings over the English alphabet T = {akam, aklm, cmgi, cmos, cors, corv, nort, novl, novn}. In this case all the elements in the trie have the same number of symbols, but in general a trie may contain string with diﬀerent number of symbols. Each node x in a trie is the destination of all the strings with the same preﬁx (say px ) and node x consists of a set of element-pointer pairs. The ﬁrst component of the pair is an alphabet element and the second one is a pointer

© 2005 by Chapman & Hall/CRC

Online Dictionary Structures

24-3

to a subtrie that contains all the strings with preﬁx px followed by the alphabet element. In Figure 24.1 the pairs for a trie node are represented by the edges emanating from the lower portion of the circle that represents the node. Note that no two element-pointer pairs for a trie node have the same ﬁrst component or the same second component. The set of element-pointer pairs in a trie node may be represented in diﬀerent ways. For example one may store the element-ponter pairs for each internal node as: 1.

2. 3.

An array of m pointers, where m is the number of elements in the alphabet Σ. In this case one needs to deﬁne a function to translate each element in the alphabet to an integer in the range [0, m − 1]. The function can normally be implemented to take constant time. A sorted linked list with all the symbols and corresponding pointers of the branches emanating from the node (Sussenguth [14]). A binary search tree with all the symbols and corresponding pointers of the branches emanating from the node. (Clampett [2])

a

c

k

a

m

n

m

l

m

o

g

i

o

s

o

r

v

r

s

t

v

l

n

FIGURE 24.1: TRIE for set T

We shall refer to the resulting structures as trie-array, trie-list, and trie-bst, respectively. For multidimensional dictionaries deﬁned over the set of integers [0, m), the trie method treats a point in d-space as a string with d elements deﬁned over the alphabet Σ = {0, 1, . . . , m − 1} (see Figure 24.1). For the trie-array representation the element-pointer pairs in a trie node are represented by an m-element vector of pointers. The ith pointer corresponds to the ith alphabet symbol, and a null pointer is used when the corresponding

© 2005 by Chapman & Hall/CRC

24-4

Handbook of Data Structures and Applications

alphabet element is not part of any element-pointer pair. The space required to represent n d-tuples in this structure is about dnm pointers, but the total amount of information can be represented in O(dn log m) bits. The insert and delete operation takes O(md) time, because either of these operations may add or delete d − 1 trie nodes and each one has an m-component array of pointers. On the other hand, the membership operation takes only O(d) time. This is the fastest possible implementation for the membership operation. The trie-array implementation is not possible when m is large because there will be too much space wasted. The trie-list representation mentioned above is much better for this scenario. In this case the list of element-pointer pairs is stored in a sorted linked list. The list is sorted with respect to the alphabet elements, i.e., the ﬁrst component in the element-pointer pairs. In the trie-bst representation, the element-pointers are stored in a binary search tree. The ordering is with respect to the alphabet elements. In the former case, we use dn memory locations for the d-tuples, plus 2dn pointers, and in the latter case one needs 3dn pointers. The time complexity for insert, delete and membership in both of these representations is O(d + n). It is important to note that there are two types of pointers, the trie pointers and the linked list or binary search tree pointers. In practice one may use hybrid structures in which some nodes in the trie are triearrays and others are trie-lists, and depending on the number of element-pointer pairs one transforms from one representation to the other. For example, if the number of elementpointer pairs becomes more than some bound bu one uses trie-array nodes, but if it is less then bl then one uses the trie-list. If it is some number between these two bounds, then either representation is ﬁne to use. By using appropriate values for bl and bu in this approach we can avoid “trashing” which means that one spends most of the time changing back and forth from one representations to the other. Bentley and Saxe [1] used a modiﬁed version of the trie-bst implementation. In this case the binary search tree is replaced by a completely balanced binary tree. I.e., each binary search tree or subtree for trie node x with k element-pointer pairs has as root an element-pointer pair (y, ptr) such that the median of the ordered strings (with preﬁx equal to the preﬁx of the trie node x (denoted by px ) plus any of the k alphabet elements in the k element-pointer pairs) has as preﬁx px followed by y. For example, the root of the trie in Figure 24.1 has the pair with alphabet element c, and the root of the subtrie for the preﬁx no is the pair with alphabet element v. This balanced structure is the best possible when the trie does not change or it changes very slowly like in multikey sorting or restricted searching [9, 10]. Since the overall structure is rigid, it can be shown that rebalancing after inserting or deleting an element can be very expensive and therefore not appropriate in a dynamic environment. Research into using diﬀerent balanced strategies for the trie-bst structures has lead into structures that use ﬁxed order B-trees [7], weight balanced trees [12], AVL trees [16], and balanced binary search trees [17]. It has been shown that insert, delete and membership for multidimensional dictionaries for all of the above structures takes O(d + log n) time in the worst case, except for weight balanced trees in which case it is an expected time complexity bound. The above procedures are complex and require balancing criteria in addition to the obvious ones. Also, the number of rotations needed for these insert and delete operations is not bounded by a constant. Vaishnavi [17] used balanced binary search trees that require only a constant number of rotations, however since one may encounter d trees, the total number of rotations are no longer bounded by a constant. He left it as an open problem to design a structure such that multidimensional dictionaries can be implemented so that only a constant number of rotations are performed after each insert and delete operation.

© 2005 by Chapman & Hall/CRC

Online Dictionary Structures

24.3

24-5

Binary Search Tree Implementations

As pointed out by Gonzalez [4, 5], using a balanced binary search tree (without a trie) and storing each tuple at each node leads to membership (and also insert and delete) algorithms that take O(d log n) time, where n is the number of elements in the tree, because one needs to compare the element being searched with the d-tuples at each node. One can go further and claim that for some problem instances it actually requires Θ(d log n) time. Gonzalez [5] also points out that simple shortcuts to the search process do not work. For example if we reach a node in the search such that the ﬁrst k components are identical, one may be tempted to conclude that in the subtree rooted at that node one needs to search only from position k + 1 to d in the d-tuples. This is false because the k-component preﬁxes of all the d-tuples in a subtree may vary considerable in a binary search tree. One can easily show that even the membership operation cannot be implemented this way. However, this variation is more predictable when comparing against the smallest or largest d-tuple in a subtree. This is a key idea exploited in [4]. Manber and Myers [11] developed an eﬃcient algorithm that given an N symbol text it ﬁnds all the occurrences of any input word q. The scenario is that the text is static, but there will be many word searches. Their approach is to preprocess the text and generate a structure where the searching can be performed eﬃciently. In their preprocessing stage they construct a sorted list with all the N suﬃxes of the text. Locating all the occurrences of a string q reduces to performing two binary search operations in the list of suﬃxes, the ﬁrst for the ﬁrst suﬃx that contains as preﬁx q and the second search is for the last suﬃx that contains as preﬁx q. Both searches are similar, so lets discuss the ﬁrst one. This operation is similar to the membership operation discussed in this chapter. Manber and Myers [11] binary search process begins by letting L (R) be the largest (smallest) string in the in the list. Then l (r), the index of the ﬁrst element where L (R) diﬀer from q is computed. Note that if two strings are identical the index of the ﬁrst component where they diﬀer is set to the length of string plus 1. We use this convention throughout this chapter. The middle entry M in the list is located and then they compute the index of the ﬁrst component where M and q diﬀer. If this value is computed the obvious way, then the procedure will not be eﬃcient. To do this eﬃciently they compute it with l, r as well as index of the ﬁrst component where M and L, and M and R diﬀer. These last two values are precomputed in the preprocessing stage. This indirect computation may take O(|q|) time; however, overall the phases of the computation the process takes at most O(|q|) time. The advantage of this approach is that it requires only O(N ) space, and the preprocessing can be done in O(N ) expected time [11]. The disadvantage is that it is not a dynamic. Updating the text requires expensive recomputations in the precomputed data, i.e., one needs to ﬁnd the ﬁrst component where many pairs in the list diﬀer in order to carry out eﬃciently the binary search process. For their application [11] the text is static. The time required to do the search for q is O(|q| + log N ) time. This approach results in a structure that is similar to the fully balanced tree strategy in [1]. Gonzalez [4] solved Vaishnavi’s open problem by designing a binary tree data structure where the multidimensional dictionary operations can be performed in O(d + log n) time while performing only a constant number of rotations. To achieve these goals he represents the set of d-tuples S in a balanced binary search tree that contains additional information at each node. This additional information is similar to the one in the lists of Manber and Myers [11], but it can be recomputed eﬃciently as we insert and delete elements. The disadvantage is that the membership operation is more complex. But all the procedures developed in [4] are simpler than the ones given in [7, 12, 16, 17]. One just needs to add a few instructions in addition to the normal code required to manipulate balanced binary

© 2005 by Chapman & Hall/CRC

24-6

Handbook of Data Structures and Applications

search trees [15]. The additional information in [4] includes for every node v in the tree the index of the ﬁrst element where v and the smallest (largest) d-tuple in the subtree rooted at v diﬀer as well as a pointer to this d-tuple. As mentioned above, testing for membership is more complex. At each iteration in the search process [4] we are at the tree node t and we know that if q is in the tree then it is in the subtree rooted at t. The algorithm knows either the index of a component where q and the smallest d-tuple in the subtree t diﬀer, or the index of a component where q and the largest d-tuple in the subtree t diﬀer. Then the algorithm determines that q is in node t, or it advances to the left or right subtrees of node t. In either case it maintains the above invariant. It is important to point out the invariant is: “the index of a component where q and the smallest d-tuple in the subtree diﬀer” rather than the “the ﬁrst index of a ...”. It does not seem possible to ﬁnd “the ﬁrst index ...” in this structure eﬃciently with the information stored in the tree. This is not a big problem when q is in the tree since it will be found quickly, but if it is not in the tree then in order to avoid reporting that it is in the tree one must perform an additional veriﬁcation step at the end that takes O(d) time. Gonzalez [4] calls this search strategy “assume, verify and conquer” (AVC). I.e., in order to avoid multiple expensive veriﬁcation steps one assumes that some preﬁxes of strings match. The outcome of the search depends on whether or not these assumptions were valid. This can be determined by performing one simple veriﬁcation step that takes O(d) time. The elimination of multiple veriﬁcations is very important because in the worst case there are Ω(log n) veriﬁcations, and each one could take Ω(d) time. The diﬀerence between this approach and the one in [11] is that Manber and Myers compute the ﬁrst element where M and q diﬀer, where as Gonzalez [4] computes an element where M and q diﬀer. As we said before, in Gonzalez [4] structure one cannot compute eﬃciently the ﬁrst element where M and q diﬀer. Gonzalez [5] modiﬁed the structure in [4] to one that follows the search process in [11]. The new structure, which we discuss in Section 24.4, is in general faster to update because for every node t one keeps the index of the ﬁrst component where the d-tuple stored at node t and the smallest (largest) d-tuple greater (smaller) than all the d-tuples in the subtree rooted at t (if any) diﬀer, rather than the one between node t and the smallest (largest) d-tuple in its subtree rooted at t as in [4]. In this structure only several nodes have to be modiﬁed when inserting a node or deleting a leaf node, but in the structure in [4] one may need to update O(log n) nodes. Deleting a non-leaf node from the tree requires more work in this structure than in [4], but membership testing is simpler in the structure in [5]. To summarize, the membership algorithm in [5] mimics the search procedure in [11], but follows the update approach developed in [4]. Gonzalez [5] established that the dictionary operations can be implemented to take O(d + log n) time while performing only a constant number of rotations for both insert and delete. Other operations which can be performed eﬃciently in this multidimensional balanced binary search trees are: ﬁnd the (lexicographically) smallest (largest) d-tuple (O(log n) time), print in lexicographic order (O(dn) time), and concatenation (O(d + log n) time). Finding the (lexicographically) k th smallest (largest) d-tuple can also be implemented eﬃciently (O(log n) time) by adding to each node the number of nodes in its left subtree. The asymptotic time complexity bound for the procedures in [5] is identical to the ones in [4], but the procedures in [5] are simpler. To distinguish this new type of balanced binary search trees from the classic ones and the ones in [4], we refer to these trees as multidimensional balanced binary search trees. In this article we follow the notation in [5]. In Section 24.5 we show that the rotation operation in [5] can be implemented to take only constant time by making some rather simple operations that were ﬁrst discussed in [6]. The implication of this, as pointed out in [6], is that the split operation can also be implemented to take O(d + log n). Also, the eﬃcient implementation of the rotation operation allows us

© 2005 by Chapman & Hall/CRC

Online Dictionary Structures

24-7

to use the technique in [5] on many other binary search trees, like AVL, weight balanced, etc., since performing O(log n) rotations does not limit the applicability of the techniques in [5]. These observations were ﬁrst reported in [6], where they present a similar approach, but in a more general setting.

24.4

Balanced BST Implementation

Let us now discuss the data structure and algorithms for the multidimensional dictionaries given in [5]. The representation is based on balanced binary search trees, without external nodes, i.e., each node represents one d-tuple. Balanced binary search trees and their algorithms ([15]) are like the typical “bottom-up” algorithms for the Red-Black trees. The ordering of the d-tuples is lexicographic. Each node t in the tree rooted at r has the following information in addition to the color bit required to manipulate balanced binary search trees [15]. Note that if two d-tuples are identical the index of the ﬁrst component where they diﬀer is set to d + 1. We use this convention through out this chapter. s: lchild: rchild: lptr: hptr: lj: hj:

The d-tuple represented by the node. The individual elements may be accessed s.x(1), s.x(2), . . . , s.x(d). Pointer to the left subtree of t. Pointer to the right subtree of t. Pointer to the node with largest d-tuple in r with value smaller than all the d-tuples in the subtree rooted at t, or null if no such d-tuple exists. Pointer to the node with smallest d-tuple in r with value larger than all the d-tuples in the subtree rooted at t, or null if no such d-tuple exists. Index of ﬁrst component where s and the d-tuple at the node pointed at by lptr diﬀer, or one if lptr = null. Index of ﬁrst component where s and the d-tuple at the node pointed at by lptr diﬀer, or one if hptr = null.

The insert, delete and membership procedures perform the operations required to manipulate balanced binary search trees, and some new operations to update the structure. The basic operations to manipulate balanced binary search trees are well-known [13, 15]; so we only discuss in detail the new operations. To show that membership, insert, and delete can be implemented to take O(d + log n) time, we only need to show that the following (new) operations can be performed O(d+log n) time. A. B. C. D. E.

Given the d-tuple q determine whether or not it is stored in the tree. Update the structure after adding a node (just before rotation(s), if any). Update the structure after performing a rotation. Update the structure after deleting a leaf node (just before rotation(s), if any). Transform the deletion problem to deletion of a leaf node.

The membership operation that tests whether or not the d-tuple q given by (q.x(1), q.x(2), . . . , q.x(d)) is in the multidimensional binary search tree (or subtree) rooted at r appears in [5] and implements (A). The basic steps are as follows. Let t be any node encountered in the search process in the multidimensional balanced binary search tree rooted at r. Let prev(t) to be the d-tuple in r with largest value but whose value is smaller than all the d-tuples stored in the subtree rooted at t, unless no such tuple exists in which case its value is (−∞, −∞, . . . , −∞), and let next(t) be the d-tuple in r with smallest value but whose value is larger than all the d-tuples stored in the subtree rooted by t, unless no such tuple exists in which case its value is (+∞, +∞, . . . , +∞). The following invariant

© 2005 by Chapman & Hall/CRC

24-8

Handbook of Data Structures and Applications

is maintained throughout the search process. During the search we will be visiting node t which is initially the root of the tree. The value of dlow is the index of the ﬁrst component where q and prev(t) diﬀer, and variable dhigh is the index of the ﬁrst component where q and next(t) diﬀer. The d-tuple being search for, q, has value (lexicographically) greater than prev(t) and (lexicographically) smaller than next(t) The computation of j, the index of the ﬁrst component where t.s and q diﬀer is like the one in [11]. When dlow ≥ dhigh , then either (1) dlow = t.lj in which case j is just min {dlow , t.lj}, or (2) dlow = t.lj in which case j is set to the index of the ﬁrst component starting at position dlow where q and t.s diﬀer. The case when dlow < dhigh is similar and appears in [5]. Gonzalez [5] proved that by setting j by the above procedure will set it to the index of the ﬁrst component where t.s and q diﬀer. When j is equal to d + 1, then q is the d-tuple stored in t and we return the value of true. Otherwise by comparing the jth element of q and t the procedure decides whether to search in the left or right subtrees of t. In either case dhigh or dlow is set appropriately and the invariant holds at the next iteration. The time complexity at each level is not bounded by a constant; however, it is bounded by 1 plus the diﬀerence between the new and old value of max{dlow , dhigh }. Since max{dlow , dhigh } does not decrease and it is at most d + 1 at the end of each operation, it follows that the total number of operations performed is of order d plus the height of the tree (O(log n)). Correctness and eﬃciency are established in the following lemma whose proof appears in [5].

LEMMA 24.1 [5] Given a d-tuple q procedure membership(q, r) given in [5] determines whether or not q is in the multidimensional balanced binary search tree rooted at r in O(d + log n) time.

For operation (B), a node is added as a leaf node, the information that needs to be set for that node are the pointers lptr and hptr which can be copied from the parent node, unless there is no parent in which case they are set to null. The values lj, and hj can be computed directly in O(d) time. A predecessor of the node added also needs its lptr and lj, or hptr and hj values changed. This can be easily done in O(d), by remembering the the node in question during the search process. i.e., the last node where one makes a left turn (moving to the leftchild) or the last one where one makes a right turn (moving to the rightchild).

LEMMA 24.2 [5] After inserting a node q in a multidimensional balanced binary search tree and just before rotation the structure can be updated as mentioned above in O(d+log n) time.

The implementation of operation (D) is similar to the one for (B), therefore it will not be discussed further. The rotation operation (C) can be reduced to the simple rotation, because double and triple rotations can reduced to two and three simple rotations, respectively. A simple rotation is shown in Figure 24.2. It is simpler to implement the rotation operation by moving the nodes rather than just their values, because this reduces the number of updates that need to be performed. Clearly, the only nodes whose information needs to be updated are b, d and the parent of d. This just takes O(d) time.

© 2005 by Chapman & Hall/CRC

Online Dictionary Structures

24-9

d

b

a

b

e

d

a

c

c

e

FIGURE 24.2: Rotation.

[5] After a rotation in a multidimensional balanced binary search tree the structure can be updated as mentioned above in O(d) time.

LEMMA 24.3

Operation (E) is more complex to implement. It is well known [8] that the problem of deleting an arbitrary node from a balanced binary search tree can be reduced to deleting a leaf node by applying a simple transformation. Since all cases are similar, lets just discuss the case shown in Figure 24.3. The node to delete is a which is not a leaf node. In this case node b contents are moved to node a, and now we delete the old node b which is labeled x. As pointed out in [5], updating the resulting structure takes O(d + log n) time. Since the node labeled x will be deleted, we do not need to update it. For the new root (the one labeled b) we need to update the lj and hj values. Since we can use directly the old lptr and hptr pointers, the update can be done in O(d) time. The lj (hj) value of the nodes (if any) in the path that starts at the right (left) child of the new root that continues through the leftchild (rightchild) pointers until the null pointer is reached needs to be updated. There are at most O(log n) of such nodes. However, the d-tuples stored at each of these nodes are decreasing (increasing) in lexicographic order when traversing the path top down. Therefore, the lj (hj) values appear in increasing (decreasing) order. The correct values can be easily computed in O(d + log n) time by reusing previously computed lj (hj) values while traversing the path top down. The following lemma, whose proof is omitted, summarizes these observations. Then we state the main result in [5] which is based on the above discussions and the lemmas.

LEMMA 24.4 [5] Transforming the deletion problem to deleting a leaf node can be performed, as mentioned above, in O(d + log n) time.

THEOREM 24.1 [5] Any on-line sequence of operations of the form insert, delete and membership, for any d-tuple can be carried out by the procedure in [5] on a multidimensional balanced binary search tree in O(d + log n) time, where n is the current number of points, and each insert and delete operation requires no more than a constant number of rotations.

© 2005 by Chapman & Hall/CRC

24-10

Handbook of Data Structures and Applications a

b

b

x

FIGURE 24.3: Transforming deletion of an arbitrary node to deletion of a leaf node.

24.5

Additional Operations

With respect to other operations, one can easily ﬁnd the smallest or largest d-tuple in O(log n) time by just taking all the leftchild or rightchild pointers. By traversing the tree in inorder one can print all the d-tuples in increasing in O(dn) time. An O(d + log n) time algorithm to concatenate two sets represented by the structure can be easily obtained by using standard procedures provided that all the d-tuples in one set are in lexicographic order smaller than the ones in the other set. The k th smallest or largest d-tuple can be found in O(log n) time after adding to each node in the tree the number of nodes in its left subtree. The split operation is given a d-tuple q and a set represented by a multidimensional balanced binary search tree t, split t into two multidimensional balanced binary search trees, one containing all the d-tuples in lexicographic order smaller than or equal to q, and the other one containing the remaining elements. At ﬁrst glance, it seems that the split operation cannot be implemented within the O(d+log n) time complexity bound. The main reason is that there could be Ω(log n) rotations and each rotation takes time proportional to d. However, the analysis in [5] for the rotation operation which is shown in Section 24.4 can be improved and one can show that it can be easily implemented to take constant time. The reason for this is that for a simple rotation, see Figure 24.2, the lj or the hj value need to be updated for the node labeled b, and we know the lptr and hptr pointers. This value can be computed from previous values before the rotation, i.e., the lj and hj values for node b and the fact that the rptr value for b is node d before the rotation. The other value to be updated is the lj value for node d after the rotation, but this is simply the rj value for node d before the rotation. The eﬃcient implementation of the rotation operation allows us to use the technique in [5] on many other binary search trees, like AVL, weight balanced, etc., since having O(log n) rotations does not limit the applicability of the techniques in [5]. These observations were ﬁrst made in [6] where they present a similar approach, but in a more general setting.

24.6

Discussion

On average the trie-bst approach requires less space to represent the d-tuples than our structures. However; multidimensional balanced binary search trees have simple procedures take

© 2005 by Chapman & Hall/CRC

Online Dictionary Structures

24-11

only O(d+log n) time, and only a constant number of rotations are required after each insert and delete operations. Furthermore, operations like ﬁnd the (lexicographically) smallest or largest d-tuple (O(log n) time), print in lexicographic order (O(dn) time), concatenation (O(d + log n) time), and split (O(d + log n) time) can also be performed eﬃciently in this new structure. This approach can also be used in other balanced binary search trees, like AVL, weight balanced, etc.

References [1] J. L. Bentley, and J. B. Saxe, Algorithms on Vector Sets, SIGACT News, (Fall 1979), pp. 36–39. [2] H. A. Clampett, Randomized Binary Searching With the Tree Structures, Comm. ACM, 7, No. 3, (1964), pp. 163–165. [3] T. Gonzalez, Covering a Set of Points with Fixed Size Hypersquares and Related Problems, Information Processing Letters, 40, (1991), pp. 181–188. [4] T. Gonzalez, The On–Line D–Dimensional Dictionary Problem, Proceedings of the 3rd Symposium on Discrete Algorithms, January 1992, pp. 376 – 385. [5] T. Gonzalez, Simple Algorithms for the On-Line Multidimensional Problem and Related Problems, Algorithmica, Vol. 28, (2000), pp. 255 – 267. [6] R. Grossi and G. F. Italiano, International Colloquium on Automata, Languages and Programming (ICALP 99), Lecture Notes in Computer Science, Vol. 1644, (1999), pp 372 – 381. [7] R. H. Gueting, and H. P. Kriegel, Multidimensional B-tree: An Eﬃcient Dynamic File Structure for Exact Match Queries, Proceedings 10th GI Annual Conference, Informatik Fachberichte, Springer-Verlag, (1980), pp. 375–388. [8] L. J. Guibas and R. Sedgewick, A Dichromatic Framework for Balanced Trees, Proceedings of the 19th Annual IEEE Symposium on Foundations of Computer Science, (1978), pp. 8–21. [9] D. S. Hirschberg, On the Complexity of Searching a Set of Vectors, SIAM J. on Computing Vol. 9, No. 1, February (1980), pp. 126–129. [10] S. R. Kosaraju, On a Multidimensional Search Problem, 1979 ACM Symposium on the Theory of Computing, pp. 67–73. [11] U. Manber, and G. Myers, Suﬃx Arrays: A New Method for On–Line String Searches, SIAM J. Comput, Vol. 22, No. 5, Oct. 1993, pp. 935 – 948. Also in Proceedings of the First ACM-SIAM Symposium on Discrete Algorithms, Jan. 1990, pp. 319 – 327. [12] K. Mehlhorn, Dynamic Binary Search, SIAM J. Computing, Vol. 8, No. 2, (May 1979), pp. 175–198. [13] H. J. Olivie, A New Class of Balanced Search Trees: Half-Balanced Binary Search Trees, Ph.D. Thesis, University of Antwerp, U.I.A., Wilrijk, Belgium, (1980). [14] E. H. Sussenguth, Use of Tree Structures for Processing Files, Comm. ACM, 6, No. 5, (1963), pp. 272–279. [15] R. E. Tarjan, Updating a Balanced Search Tree in O(1) Rotations, Information Processing Letters, 16, (1983), pp. 253–257. [16] V. Vaishnavi, Multidimensional Height-Balanced Trees, IEEE Transactions on Computers, Vol. c-33, No. 4, (April 1984), pp. 334–343. [17] V. Vaishnavi, Multidimensional Balanced Binary Trees, IEEE Transactions on Computers, Vol. 38, No. 7, (April 1989), pp. 968–985.

© 2005 by Chapman & Hall/CRC

25 Cuttings 25.1 25.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Cutting Construction . . . . . . . . . . . . . . . . . . . . . . . . Geometric Sampling

25.3

Bernard Chazelle Princeton University

25.1

•

25-1 25-2

Optimal Cuttings

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25-6

Point Location • Hopcroft’s problem • Convex Hulls and Voronoi Diagrams • Range Searching

Introduction

For divide-and-conquer purposes, it is often desirable to organize a set S of n numbers into a sorted list, or perhaps to partition it into two equal-sized groups with no element in one group exceeding any element in the other one. More generally, we might wish to break up S into k groups of size roughly n/k, with again a total ordering among the distinct groups. In the ﬁrst case we sort; in the second one we compute the median; in the third one we compute quantiles. This is all well known and classical. Is it possible to generalize these ideas to higher dimension? Surprisingly the answer is yes. A geometric construction, known as an ε-cutting, provides a space partitioning technique that extends the classical notion of selection to any ﬁnite dimension. It is a powerful, versatile data structure with countless applications in computational geometry. Let H be a set n hyperplanes in Rd . Our goal is to divide up Rd into simplices, none of which is cut by too many of the n hyperplanes. By necessity, of course, some of the simplices need to be unbounded. We choose a parameter ε > 0 to specify the coarseness of the subdivision. A set C of closed full-dimensional simplices is called an ε-cutting for H (Fig. 25.1) if: (i) the union of the simplices is Rd , and their interiors are mutually disjoint; (ii) the interior of any simplex is intersected by at most εn hyperplanes of H. Historically, the idea of using sparsely intersected simplices for divide and conquer goes back to Clarkson [10] and Haussler and Welzl [15], among others. The deﬁnition of an εcutting given above is essentially due to Matouˇsek [18]. Eﬃcient but suboptimal constructions were given by Agarwal [1, 2] for the two-dimensional case and Matouˇsek [17, 18, 21] for arbitrary dimension. The optimal ε-cutting construction cited in the theorem below, due to Chazelle [4], is a simpliﬁcation of an earlier design by Chazelle and Friedman [7]. Given a set H of n hyperplanes in Rd , for any 0 < ε < 1, there exists an ε-cutting for H of size O(ε−d ), which is optimal. The cutting, together with the list

THEOREM 25.1

25-1

© 2005 by Chapman & Hall/CRC

25-2

Handbook of Data Structures and Applications

FIGURE 25.1: A two-dimensional cutting.

of hyperplanes intersecting the interior of each simplex, can be found deterministically in O(nε1−d ) time.

25.2

The Cutting Construction

This section explains the main ideas behind the proof of Theorem 25.1. We begin with a quick overview of geometric sampling theory. For a comprehensive treatment of the subject, see [6, 23].

25.2.1

Geometric Sampling

A set system is a pair Σ = (X, R), where X is a set and R is a collection of subsets of X. In our applications, X ⊂ Rd and each R ∈ R is of the form X ∩ f (K), where K is a ﬁxed region of Rd and f is any member of a ﬁxed group F of transformations. For example, we might consider n points in the plane, together with the subsets lying inside any triangle congruent to a ﬁxed triangle. Given Y ⊆ X, we deﬁne the set system “induced by Y ” to be (Y, R|Y ), with R|Y = { Y ∩ R | R ∈ R }. The VC-dimension (named for Vapnik and Chervonenkis [28]) of Σ is deﬁned as the maximum size of any Y such that R|Y = 2Y . For example, the VC-dimension of the inﬁnite geometric set system formed by points in the plane and halfplanes is 3. The shatter function πR (m) of the set system Σ = (X, R) is the maximum number of subsets in the set system (Y, R|Y ) induced by any Y ⊆ X of size m. If πR (m) is bounded by cmd , for some constants c, d > 0, then the set system is said to have a shatter function exponent of at most d. It was shown in [26–28] that, if the shatter function exponent is O(1), then so is the VC-dimension. Conversely, if the VC-dimension is d ≥ 1 then, for any m ≥ d, πR(m) < (em/d)d . We now introduce two fundamental notions: ε-nets and ε-approximations. For any 0 < ε < 1, a set N ⊆ X is called an ε-net for a ﬁnite set system (X, R) if N ∩ R = ∅ for any R ∈ R with |R|/|X| > ε. A ﬁner (but more costly) sampling mechanism is provided by an

© 2005 by Chapman & Hall/CRC

Cuttings

25-3

ε-approximation for (X, R), which is a set A ⊆ X such that, given any R ∈ R, |R| |A ∩ R| − ≤ ε. |X| |A| Some simple structural facts about nets and approximations: If X1 , X2 are disjoint subsets of X of the same size, and A1 , A2 are samesize ε-approximations for the subsystems induced by X1 , X2 (respectively), then A1 ∪ A2 is an ε-approximation for the subsystem induced by X1 ∪ X2 .

LEMMA 25.1

If A is an ε-approximation for (X, R), then any ε -approximation (resp. -net) for (A, R|A ) is also an (ε + ε )-approximation (resp. -net) for (X, R).

LEMMA 25.2

In the absence of any restrictive assumption on the set system, it is natural to expect the sample size to depend on both the desired accuracy and the size of the set system itself. THEOREM 25.2 Given a set system (X, R), where |X| = n and |R| = m, for any 1/n ≤ ε < 1, it is possible to ﬁnd, in time O(nm), an ε-net for (X, R) of size O(ε−1 log m) and an ε-approximation for (X, R) of size O(ε−2 log m).

If we assume bounded VC-dimension, everything changes. In fact the key result in geometric sampling theory is that, for any given level of accuracy, the sample size need not depend on the size of the set system. In practice, geometric set systems often are “accessible” via an oracle function that takes any Y ⊆ X as input and returns the list of sets in R|Y (each set represented explicitly). We assume that the time to do that is O(|Y |d+1 ), which is linear in the maximum possible size of the oracle’s output, where d is the shatter function exponent. For example, in the case of points and disks in the plane, we have d = 3, and so this assumes that, given n points, we can enumerate all subsets enclosed by a disk in time O(n4 ). To do this, enumerate all k-tuples of points (k ≤ 3) and, for each tuple, ﬁnd which points lie inside the smallest disk enclosing the k points. The main result below is stated in terms of the shatter function exponent d, but the same results hold if d denotes the VC-dimension. THEOREM 25.3 Given a set system (X, R) of shatter function exponent d, for any ε ≤ 1/2, an ε-approximation for (X, R) of size O(dε−2 log dε−1 ) and an ε-net for (X, R) of size O(dε−1 log dε−1 ) can be computed in time O(d)3d (ε−2 log dε−1 )d |X|.

Vapnik and Chervonenkis [28] described a probabilistic construction of ε-approximations in bounded VC-dimension. The deterministic construction stated above is due to Chazelle and Matouˇsek [8], and builds on earlier work [7, 17, 18, 21]. Haussler and Welzl [15] proved the upper bound on the size of ε-nets. The running time for computing an ε-net was improved to O(d)3d (ε−1 log dε−1 )d |X| by Br¨onnimann, Chazelle, and Matouˇsek [3], using the concept of a sensitive ε-approximation. Koml´os, Pach, and Woeginger [16] showed that, for any ﬁxed d, the bound of O(ε−1 log ε−1 ) for ε-nets is optimal in the worst case (see also [25]). The situation is diﬀerent with ε-approximations: if d > 1 is the VC dimension, then there exists an ε-approximation for (X, R) of size O(ε−2+2/(d+1) ) [22, 24].

© 2005 by Chapman & Hall/CRC

25-4

Handbook of Data Structures and Applications

An important application of ε-approximations is for estimating how many vertices in an arrangement of hyperplanes in Rd lie within a given convex region. Let Σ = (H, R) be the set system formed by a set H of hyperplanes in Rd , where each R ∈ R is the subset of H intersected by an arbitrary line segment. Let σ be a convex body (not necessarily full-dimensional). In the arrangement formed by H within the aﬃne span of σ, let V (H, σ) be the set of vertices that lie inside σ. The following was proven in [3, 4]. Given a set H of hyperplanes in Rd in general position, let A be an ε-approximation for Σ = (H, R). Given any convex body σ of dimension k ≤ d, |V (H, σ)| |V (A, σ)| ≤ ε. − |H|k |A|k

THEOREM 25.4

25.2.2

Optimal Cuttings

For convenience of exposition, we may assume that the set H of n hyperplanes in Rd is in general position. Let A(H) denote the arrangement formed by H. Obviously, no simplex of an ε-cutting can enclose more than O(εn)d vertices. Since A(H) itself has exactly nd vertices, we should expect to need at least on the order of ε−d simplices. But this is precisely the upper bound claimed in Theorem 25.1, which therefore is asymptotically tight. Our starting point is an ε-net N for H, where the underlying set system (X, R) is formed by a set X of hyperplanes and the collection R of subsets obtained by intersecting X with all possible open d-simplices. Its VC-dimension is bounded, and so by Theorem 25.3 an ε-net N of size O(ε−1 log ε−1 ) can be found in nε−O(1) time. We need to use a systematic way to triangulate the arrangement formed by the ε-net. We build a canonical triangulation of A(N ) by induction on the dimension d (Fig. 25.2). The case d = 1 is trivial, so we assume that d > 1. 1. Rank the vertices of A(N ) by the lexicographic order of their coordinate sequences. 2. By induction, form a canonical triangulation of the (d − 1)-dimensional arrangement made by each hyperplane with respect to the n − 1 others. 3. For each cell (ie, full-dimensional face) σ of A(N ), lift toward its lowest-ranked vertex v each k-simplex (k = 0, . . . , d − 2) on the triangulated boundary of σ that does not lie in a (d − 1)-face of A(N ) that is incident to v. It is not hard to see that the combinatorial complexity (ie, number of all faces of all dimensions) of the canonical triangulation of A(N ) is asymptotically the same as that of A(N ), which is O(ε−1 log ε−1 )d . Therefore, the closures of its cells constitute an ε-cutting for H of size O(ε−1 log ε−1 )d , which is good but not perfect. For optimality we must remove the log factor. Assume that we have at our disposal an optimal method for building an ε0 -cutting of size O(ε−d 0 ), for some suitably small constant ε0 . To bootstrap this into an optimal ε-cutting construction for any ε, we might proceed as follows: Beginning with a constant-size cutting, we progressively reﬁne it by producing several generations of ﬁner and ﬁner cuttings, C1 , C2 , etc, where Ck is an εk0 -cutting for H of size O(ε−dk ). Speciﬁcally, assume that we have recursively computed the cutting Ck for H. For each σ ∈ Ck , we have the incidence list Hσ of the hyperplanes intersecting the interior of σ. To compute the next-generation cutting Ck+1 , consider reﬁning each σ in turn as follows: 1. Construct an ε0 -cutting for Hσ , using the algorithm whose existence is assumed.

© 2005 by Chapman & Hall/CRC

Cuttings

25-5

FIGURE 25.2: A canonical triangulation.

2. Retain only those simplices that intersect σ and clip them outside of σ. 3. In case the clipping produces nonsimplicial cells within σ, retriangulate them “canonically” (Fig. 25.3).

FIGURE 25.3: Clip and retriangulate.

Let Ck+1 denote the collection of new simplices. A simplex of Ck+1 in σ is cut (in its interior) by at most ε0 |Hσ | hyperplanes of Hσ , and hence of H. By induction, this produces at most nεk+1 cuts; therefore, Ck+1 is an εk+1 -cutting. The only problem is that Ck+1 0 0 might be a little too big. The reason is that excess in size builds up from generation to generation. We circumvent this diﬃculty by using a global parameter that is independent of the construction; namely, the total number of vertices. Note that we may assume that |Hσ | > nεk+1 , since σ would otherwise already satisfy 0 the requirement of the next generation. We distinguish between full and sparse simplices. Given a set X of hyperplanes and a d-dimensional (closed) simplex σ, let v(X, σ) be the number of vertices of A(X) in the interior of σ. • The simplex σ ∈ Ck is full if v(H, σ) ≥ c0 |Hσ |d , where c0 = ε20 . If so, we compute an ε0 -net for Hσ , and triangulate the portion of the net’s arrangement within σ −1 d to form an ε0 -cutting of size O(ε−1 0 log ε0 ) . Its simplices form the elements of

© 2005 by Chapman & Hall/CRC

25-6

Handbook of Data Structures and Applications

Ck+1 that lie within σ. • A simplex σ that is not full is sparse. If so, we ﬁnd a subset Hσo of Hσ that satisﬁes two conditions: (i) The canonically triangulated portion of A(Hσo ) that lies inside σ consists of a set Cσo of at most 12 ε−d 0 full-dimensional (closed) simplices. (ii) Each simplex of Cσo is intersected in its interior by at most ε0 |Hσ | hyperplanes of H. The elements of Ck+1 within σ are precisely the simplices of Cσo . LEMMA 25.3

−d(k+1)

Ck+1 is an εk+1 -cutting of size O(ε0 0

).

Next, we explain how to enforce conditions (i) and (ii) for sparse simplices. To be able to distinguish between full and sparse simplices, we use a c0 /2-approximation Aσ for Hσ of constant size, which we can build in O(|Hσ |) time (Theorem 25.3). It follows from Theorem 25.4 that v(H, σ) v(Aσ , σ)| c0 (25.1) |Hσ |d − |Aσ |d ≤ 2 ; therefore, we can estimate v(H, σ) in constant time with an error of at most c20 |Hσ |d , which for our purposes here is inconsequential. How do we go about reﬁning σ and how costly is it? If σ is a full simplex, then by Theorem 25.3, we can compute the required ε0 -net in O(|Hσ |) time. Within the same amount of time, we can also ﬁnd the new set of simplices in σ, together with all of their incidence lists. The reﬁnement of a sparse simplex σ is a little more involved. We begin with a randomized construction, from which we then remove all the randomness. We compute Hσo by −1 choosing a random sample from Aσ of size c1 ε−1 0 log ε0 , for some constant c1 large enough (independent of ε0 ). It can be shown that, with probability at least 2/3, the sample forms an (ε0 /2)-net for Aσ . By Lemma 25.2, Hσo is a (c0 /2+ε0/2)-net for Hσ ; therefore, we ensure that (ii) holds with probability at least 2/3. A slightly more complex analysis shows that (i) also holds with probability at least 2/3; therefore (i,ii) are both true with probability at least 1/3. We derandomize the construction in a trivial manner by trying out all possible samples, which takes constant time; therefore, the running time for reﬁning σ is O(|Hσ |). Putting everything together, we see that reﬁning any simplex takes time proportional to the total size of the incidence lists produced. By Lemma 25.3, the time needed for building −(d−1)(k+1) generation k + 1 is O(nε0 ). The construction goes on until we reach the ﬁrst k generation such that ε0 ≤ ε. This establishes Theorem 25.1. From the proof above it is not diﬃcult to derive a rough estimate on the constant factor in the O(ε−d ) bound on the size of an ε-cutting. A thorough investigation into the smallest possible constant was undertaken by Har-Peled [14] for the two-dimensional case.

25.3

Applications

Cuttings have numerous uses in computational geometry. We mention just a handful: point location, Hopcroft’s problem, convex hulls, Voronoi diagrams, and range searching. In many cases, cuttings allow us to derandomize existing probabilistic solutions, ie, to remove any

© 2005 by Chapman & Hall/CRC

Cuttings

25-7

need for random bits and thus produce deterministic algorithms. Many other applications are described in the survey [2].

25.3.1

Point Location

How do we preprocess n hyperplanes in Rd , so that, given a query point q, we can quickly ﬁnd the face of the arrangement formed by the hyperplanes that contains the point? For an answer, simply set ε = 1/n in Theorem 25.1, and use the nesting structure of C1 , C2 , etc, to locate q in Ck . Note that this can be done in constant time once we know the location in Ck−1 . THEOREM 25.5 Point location among n hyperplanes can be done in O(log n) query time, using O(nd ) preprocessing.

Observe that if we only wish to determine whether the point q lies on one of the hyperplanes, it is possible to cut down the storage requirement a little. To do that, we use an ε-cutting for ε = (log n)/n. The cells associated with the bottom of the hierarchy are each cut by O(log n) hyperplanes, which we can therefore check one by one. This reduces the storage to O(nd /(log n)d−1 ).

25.3.2

Hopcroft’s problem

Given n points and n lines in R2 , is there any incidence between points and lines? This is Hopcroft’s problem. It is self-dual; therefore dualizing it won’t help. A classical arrangement of n lines due to Erd˝ os has the property that its n highest-degree vertices are each incident to Ω(n1/3 ) edges. By picking these n lines as input to Hopcroft’s problem and positioning the n points in the near vicinity of these high-degree vertices, we get a sense (not a proof) that to solve the problem should require checking each point against the Ω(n1/3 ) lines incident to their nearby vertex. This leads to an Ω(n4/3 ) running time, which under some realistic (though restrictive) conditions, can be made into a rigorous lower bound [13]. At the very least this line of reasoning suggests that to beat Ω(n4/3 ) is unlikely to be easy. This bound has almost been achieved by an algorithm of Matouˇsek [20] with, at its heart, a highly intricate and subtle use of cuttings. THEOREM 25.6 To decide whether n points and n lines in the plane are free of any ∗ incidence can be done in n4/3 2O(log n) time.

25.3.3

Convex Hulls and Voronoi Diagrams

Cuttings play a key role in computing convex hulls in higher dimension. Given n points in Rd , their convex hull is a bounded convex polytope with O(nd/2 ) vertices. Of course, it may have much fewer of them: eg, d + 1, if n − d − 1 points lie strictly inside the convex hull of the d + 1 others. It is notoriously diﬃcult to design output-sensitive algorithms, the term designating algorithms whose running time is a function of both input and output sizes. In the “worst case” approach our goal is a simpler one: to design an optimal convex hull algorithm that runs in O(n log n + nd/2 ) time. (The extra term n log n is unavoidable because sorting is easily embedded as a convex hull problem.) Computing the convex hull of n points is equivalent by duality to computing the intersection of n halfspaces. A naive approach to this problem is to insert each halfspace one after

© 2005 by Chapman & Hall/CRC

25-8

Handbook of Data Structures and Applications

the other while maintaining the intersection of previously inserted halfspaces incrementally. This can be done without diﬃculty if we maintain a canonical triangulation of the current intersection polyhedron and update a bipartite graph indicating which hyperplane intersects which cell of the triangulation. A surprising fact, ﬁrst proven by Clarkson and Shor [11], is that if the halfspaces are inserted in random order, then the expected running time of the algorithm can be made optimal. By using an elaborate mix of ε-nets, ε-approximations, and ε-cuttings, Chazelle [5] showed how to compute the intersection deterministically in optimal time; his algorithm was subsequently simpliﬁed by Br¨ onnimann, Chazelle, and Matouˇsek [3]; a complete description is also given in the book [6]. This implies the two theorems below. The polyhedron formed by the intersection of n halfspaces in Rd can be computed in O(n log n + nd/2 ) time.

THEOREM 25.7

Not only does this result give us an optimal deterministic solution for convex hulls, but it also solves the Voronoi diagram problem. Indeed, recall [12, 29] that a Voronoi diagram of n points in Rd can be “read oﬀ” from the facial structure of the convex hull of a lift of the n points into Rd+1 . The convex hull of a set of n points in Rd can be computed deterministically in O(n log n + nd/2 ) time. By duality, the Voronoi diagram (or Delaunay triangulation) of a set of n points in Ed can be computed deterministically in O(n log n + nd/2 ) time. THEOREM 25.8

25.3.4

Range Searching

Simplex range searching refers to the problem of preprocessing a set P of n points in Rd so that, given a query (closed) simplex σ, the size of P ∩ σ can be quickly evaluated. Variants of the problem include reporting thepoints of P ∩σ explicitly or, assuming that each point p has a weight w(p) ∈ R, computing { w(p) | p ∈ P ∩ σ }. The most powerful data structure for solving simplex range searching, the simplicial partition, vividly illustrates the power of ε-cuttings. A collection {(Pi , Ri )} is called a simplicial partition if • the collection {Pi } forms a partition of P ; and • each Ri is a relatively open simplex that contains Pi . The simplices Ri can be of any dimension and, in fact, need not even be disjoint; furthermore the Pi ’s need not be equal to P ∩ Ri . A hyperplane is said to cut Ri if it intersects, but does not contain, Ri . The cutting number of the simplicial partition refers to the maximum number of Ri ’s that can be cut by a single hyperplane. Matouˇsek [19] designed an optimal construction, which happens to be crucially based on ε-cuttings. LEMMA 25.4 Given a set P of n points in Rd (d > 1), for any integer 1 < r ≤ n/2, there exists a simplicial partition of cutting number O(r1−1/d ) such that n/r ≤ |Pi | < 2n/r for each (Pi , Ri ) in the partition.

To understand the usefulness of simplicial partitions for range searching, one needs to learn about partition trees. A partition tree for P is a tree T whose root is associated with the point set P . The set P is partitioned into subsets P1 , . . . , Pm , with each Pi associated

© 2005 by Chapman & Hall/CRC

Cuttings

25-9

with a distinct child vi of the root. To each vi corresponds a convex open set Ri , called the region of vi , that contains Pi . The regions Ri are not necessarily disjoint. If |Pi | > 1, the subtree rooted at vi is deﬁned recursively with respect to Pi . Armed with a partition tree, it is a simple matter to handle range search queries. In preprocessing, at each node we store the sum of the weights of the points associated with the corresponding region. To answer a query σ, we visit all the children vi of the root and check whether σ intersects the region Ri of vi : (i) if the answer is yes, but σ does not completely enclose the region Ri of vi , then we visit vi and recurse; (ii) if the answer is yes, but σ completely encloses Ri , we add to our current weight count the sum of the weights within Pi , which happens to be stored at vi ; (iii) if the answer is no, then we do not recurse at vi . It is straightforward to see that Lemma 25.4 can be used to construct partition trees. It remains for us to choose the branching factor. If we choose a large enough constant r, we end up with a partition tree that lets us answer simplex range search queries in O(n1−1/d+ε ) time for any ﬁxed ε > 0, using only O(n) storage. A more complex argument by Matouˇsek [19] removes the ε term from the exponent. With superlinear storage, various space-time tradeoﬀs can be achieved. For example, as shown by Chazelle, Sharir, and Welzl [9], simplex range searching with respect to n points in Rd can be done in O(n1+ε /m1/d ) query time, using a data structure of size m, for any n ≤ m ≤ nd . Matouˇsek [20] slightly improved the query time to O(n(log m/n)d+1 /m1/d ), for m/n large enough. These bounds are essentially optimal under highly general computational models [6].

Acknowledgments This work was supported in part by NSF grant CCR-998817, and ARO Grant DAAH0496-1-0181.

References [1] Agarwal, P.K. Partitioning arrangements of lines II: Applications, Disc. Comput. Geom. 5 (1990), 533–573. [2] Agarwal, P.K. Geometric partitioning and its applications, in Computational Geometry: Papers from the DIMACS Special Year, eds., Goodman, J.E., Pollack, R., Steiger, W., Amer. Math. Soc., 1991. [3] Br¨onnimann, H., Chazelle, B., Matouˇsek, J. Product range spaces, sensitive sampling, and derandomization, SIAM J. Comput. 28 (1999), 1552–1575. [4] Chazelle, B. Cutting hyperplanes for divide-and-conquer, Disc. Comput. Geom. 9 (1993), 145–158. [5] Chazelle, B. An optimal convex hull algorithm in any ﬁxed dimension, Disc. Comput. Geom. 10 (1993), 377–409. [6] Chazelle, B. The Discrepancy Method: Randomness and Complexity, Cambridge University Press, hardcover 2000, paperback 2001. [7] Chazelle, B., Friedman, J. A deterministic view of random sampling and its use in geometry, Combinatorica 10 (1990), 229–249. [8] Chazelle, B., Matouˇsek, J. On linear-time deterministic algorithms for optimization problems in ﬁxed dimension, J. Algorithms 21 (1996), 579–597. [9] Chazelle, B., Sharir, M., Welzl, E. Quasi-optimal upper bounds for simplex range searching and new zone theorems, Algorithmica 8 (1992), 407–429.

© 2005 by Chapman & Hall/CRC

25-10

Handbook of Data Structures and Applications

[10] Clarkson, K.L. New applications of random sampling in computational geometry, Disc. Comput. Geom. 2 (1987), 195–222. [11] Clarkson, K.L., Shor, P.W. Applications of random sampling in computational geometry, II, Disc. Comput. Geom. 4 (1989), 387–421. [12] Edelsbrunner, H. Algorithms in Combinatorial Geometry, Springer, 1987. [13] Erickson, J. New lower bounds for Hopcroft’s problem, Disc. Comput. Geom. 16 (1996), 389–418. [14] Har-Peled, S. Constructing planar cuttings in theory and practice, SIAM J. Comput. 29 (2000), 2016–2039. [15] Haussler, D., Welzl, E. ε-nets and simplex range queries, Disc. Comput. Geom. 2 (1987), 127–151. [16] Koml´os, J., Pach, J., Woeginger, G. Almost tight bounds for ε-nets, Disc. Comput. Geom. 7 (1992), 163–173. [17] Matouˇsek, J. Construction of ε-nets, Disc. Comput. Geom. 5 (1990), 427–448. [18] Matouˇsek, J. Cutting hyperplane arrangements, Disc. Comput. Geom. 6 (1991), 385–406. [19] Matouˇsek, J. Eﬃcient partition trees, Disc. Comput. Geom. 8 (1992), 315–334. [20] Matouˇsek, J. Range searching with eﬃcient hierarchical cuttings, Disc. Comput. Geom. 10 (1993), 157–182. [21] Matouˇsek, J. Approximations and optimal geometric divide-and-conquer, J. Comput. Syst. Sci. 50 (1995), 203–208. [22] Matouˇsek, J. Tight upper bounds for the discrepancy of halfspaces, Disc. Comput. Geom. 13 (1995), 593–601. [23] Matouˇsek, J. Geometric Discrepancy: An Illustrated Guide, Algorithms and Combinatorics, 18, Springer, 1999. [24] Matouˇsek, J., Welzl, E., Wernisch, L. Discrepancy and ε-approximations for bounded VC-dimension, Combinatorica 13 (1993), 455–466. [25] Pach, J., Agarwal, P.K. Combinatorial Geometry, Wiley-Interscience Series in Discrete Mathematics and Optimization, John Wiley & Sons, Inc., 1995. [26] Sauer, N. On the density of families of sets, J. Combinatorial Theory A 13 (1972), 145–147. [27] Shelah, S. A combinatorial problem; stability and order for models and theories in inﬁnitary languages, Pac. J. Math. 41 (1972), 247–261. [28] Vapnik, V.N., Chervonenkis, A.Ya. On the uniform convergence of relative frequencies of events to their probabilities, Theory of Probability and its Applications 16 (1971), 264–280. [29] Ziegler, G.M. Lectures on Polytopes, Graduate Texts in Mathematics, 152, SpringerVerlag, 1995.

© 2005 by Chapman & Hall/CRC

26 Approximate Geometric Query Structures

Christian A. Duncan University of Miami

Michael T. Goodrich University of California, Irvine

26.1

26.1 26.2 26.3 26.4 26.5 26.6 26.7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-1 General Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-2 Approximate Queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-3 Quasi-BAR Bounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-5 BBD Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-8 BAR Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-10 Maximum-Spread k-d Trees . . . . . . . . . . . . . . . . . . . . . . . 26-15

Introduction

Specialized data structures are useful for answering speciﬁc kinds of geometric queries. Such structures are tailor-made for the kinds of queries that are anticipated and even then there are cases when producing an exact answer is only slightly better than an exhaustive search. For√example, Chazelle and Welzl [7] showed that triangle range queries can be solved in O( n log n) time using linear space but this holds only in the plane. In higher dimensions, the running times go up dramatically, so that, in general, the time needed to perform an exact simplex range query and still use small linear space is roughly Ω(n1−1/d ), ignoring logarithmic factors [6]. For orthogonal range queries, eﬃcient query processing is possible if superlinear space is allowed. For example, range trees (Chapter 18) can answer orthogonal range queries in O(logd−1 n) time but use O(n logd−1 n) space [17]. In this chapter, we focus instead on general-purpose data structures that can answer nearest-neighbor queries and range queries using linear space. Since the lower-bound of Chazelle [6] applies in this context, in order to get query bounds that are signiﬁcantly faster than exhaustive search, we need to compromise somewhat on the exactness of our answers. That is, we will answer all queries approximately, giving responses that are within an arbitrarily small constant factor of the exact solution. As we discuss, such responses can typically be produced in logarithmic or polylogarithmic time, using linear space. Moreover, in many practical situations, a good approximate solution is often suﬃcient. In recent years several interesting data structures have emerged that eﬃciently solve several general kinds of geometric queries approximately. We review three major classes of such structures in this chapter. The ﬁrst one we discuss is a structure introduced by Arya et al. [1] for eﬃciently approximating nearest-neighbor queries in low-dimensional space. Their work developed a new structure known as the balanced box decomposition (BBD) tree. The BBD tree is a variant of the quadtree and octree [14] but is most closely related to the fair-split tree of Callahan and Kosaraju [5]. In [3], Arya and Mount extend

26-1

© 2005 by Chapman & Hall/CRC

26-2

Handbook of Data Structures and Applications

the structure to show that it can also answer approximate range queries. Their structure is based on the decomposition of space into “boxes” that may have a smaller box “cut out;” hence, the boxes may not be convex. The second general purpose data structure we discuss is the balanced aspect ratio (BAR) tree of Duncan et al. [11–13], which is a structure that has similar performance as the BBD tree but decomposes space into convex regions. Finally, we discuss an analysis of a type of k-d tree [16] that helps to explain why k-d trees have long been known to exhibit excellent performance bounds in practice for general geometric queries. In particular, we review a result of Dickerson et al. [9, 11], which shows that one of the more common variants, the maximum-spread k-d tree, exhibits properties similar to BBD trees and BAR trees; we present eﬃcient bounds on approximate geometric queries for this variant. Unfortunately, the bounds are not as eﬃcient as the BBD tree or BAR tree but are comparable.

26.2

General Terminology

In order to discuss approximate geometric queries and the eﬃcient structures on them without confusion, we must cover a few fundamental terms. We distinguish between general points in IRd and points given as input to the structures. For a given metric space IRd , the coordinates of any point p ∈ IRd are (p1 , p2 , . . . , pd ). When necessary to avoid confusion, we refer to points given as input in a set S as data points and general points in IRd as real points. For two points p, q ∈ IRd , the Lm metric distance between p and q is d 1 δ(p, q) = ( |pi − qi |m ) m . i=1

Although our analysis will concentrate on the Euclidean L2 metric space, the data structures mentioned in this chapter work in all of the Lm metric spaces. In addition, we use the standard notions of (convex) regions R, rectangular boxes, hyperplanes H, and hyperspheres B. For each of these objects we deﬁne two distance values. Let P and Q be any two regions in IRd , the minimum and maximum metric distances between P and Q are δ(P, Q) = min δ(p, q) and p∈P,q∈Q

∆(P, Q) = max δ(p, q) respectively. p∈P,q∈Q

Notice that this deﬁnition holds even if one or both regions are simply points. Let S be a ﬁnite data set S ⊂ IRd . For a subset S1 ⊆ S, the size of S1 , written |S1 |, is the number of distinct data points in S1 . More importantly, for any region R ⊂ IRd , the size is |R| = |R∩S|. That is, the size of a region identiﬁes the number of data points in it. To refer to the physical size of a region, we deﬁne the outer radius as OR = minR⊆Br r, where Br is deﬁned as the hypersphere with radius r. The inner radius of a region is IR = maxBr ⊆R r. The outer radius, therefore, identiﬁes the smallest ball that contains the region R whereas the inner radius identiﬁes the largest ball contained in R. In order to discuss balanced aspect ratio, we need to deﬁne the term. A convex region R in IRd has aspect ratio asp(R) = OR /IR with respect to some underlying metric. For a given balancing factor α, if asp(R) ≤ α, R has DEFINITION 26.1

© 2005 by Chapman & Hall/CRC

Approximate Geometric Query Structures

26-3

balanced aspect ratio and is called an α-balanced region. Similarly, a collection of regions R has balanced aspect ratio for a given factor α if each region R ∈ R is an α-balanced region. For simplicity, when referring to rectangular boxes, we consider the aspect ratio as simply the ratio of the longest side to the shortest side. It is fairly easy to verify that the two deﬁnitions are equal within a constant factor. As is commonly used, we refer to regions as being either fat or skinny depending on whether their aspect ratios are balanced or not. The class of structures that we discuss in this chapter are all derivatives of binary space partition (BSP) trees, see for example [18]. See also Chapter 20. Each node u in a BSP tree T represents both a region Ru in space and the data subset Su ⊆ S of objects, points, lying inside Ru . For simplicity, regions are considered closed and points falling on the boundary of two regions can be in either of the two regions but not both. Each leaf node in T represents a region with a constant number of data objects, points, from S. Each internal node in T has an associated cut partitioning the region into two subregions, each a child node. The root of T is associated with some bounding (rectangular box) region containing S. In general, BSP trees can store any type of object, points, lines, solids, but in our case we focus on points. Typically, the partitioning cuts used are hyperplanes resulting in convex regions. However, the BBD tree presented in Section 26.5 is slightly diﬀerent and can introduce regions with a single interior hole. Therefore, we have generalized slightly to accommodate this in our deﬁnition.

26.3

Approximate Queries

Before elaborating on the structures and search algorithms used to answer certain geometric queries, let us ﬁrst introduce the basic deﬁnitions of approximate nearest-neighbor, farthestneighbor, and range queries, see [1–3, 11, 13]. Given a set S of points in IRd , a query point q ∈ IRd , a (connected) query region Q ⊂ IR , and > 0, we deﬁne the following queries (see Figure 26.1): DEFINITION 26.2

d

• A point p∗ ∈ S is a nearest neighbor of q if δ(p∗ , q) ≤ δ(p, q) for all p ∈ S. • A point p∗ ∈ S is a farthest neighbor of q if δ(p∗ , q) ≥ δ(p, q) for all p ∈ S. • A point p ∈ S is a (1 + )-nearest neighbor of q if δ(p, q) ≤ (1 + )δ(p∗ , q), where p∗ is the true nearest neighbor of q. • A point p ∈ S is a (1 − )-farthest neighbor of q if δ(p, q) ≥ δ(p∗ , q) − OS , where p∗ is the true farthest neighbor of q. • An -approximate range query returns or counts a subset S ⊆ S such that S∩Q ⊆ S and for every point p ∈ S , δ(p, Q) ≤ OQ . To clarify further, a point p is a (1 + )-approximate nearest neighbor if its distance is within a constant error factor of the true nearest distance. Although we do not discuss it here, we can extend the deﬁnitions to report a sequence of k (1 + )-nearest (or (1 − )farthest) neighbors. One may also wonder why the approximate farthest neighbor is deﬁned in absolute terms instead of relative terms as with the nearest version. By observing that the distance from any query point to its farthest neighbor is always at least the radius of the point set OS , one can see that the approximation is as good as the relative approximation. Moreover, if the query point is extremely far from the point set, then a relative approximation could return any point in S, whereas an absolute approximation would require a much

© 2005 by Chapman & Hall/CRC

26-4

Handbook of Data Structures and Applications p p

p*

p*

q

(a)

q

(b)

(c)

FIGURE 26.1: Examples of (a) an approximate nearest-neighbor p to q with the exact neighbor p∗ , (b) an approximate farthest-neighbor p to q with the exact neighbor p∗ , and (c) an approximate range query; here the dark points are reported or counted and the lighter points are not.

more accurate distance. Although we do not modify our deﬁnition here, one can extend this notion and our later theorems to compensate for the problem of query points distant from the point set in nearest-neighbor queries as well. In other words, when the query point is relatively close to the entire data set, we can use the relative error bound, and when it is relatively far away from the entire data set, we can use the absolute error bound. The approximate range searching problem described above has one-sided false-positive errors. We do not miss any valid points, but we may include erroneous points near the range boundary. It is a simple modiﬁcation of the query regions to instead get false-negative errors. That is, we could instead require including only points that are inside of Q but allow missing some points that are inside of Q if they are near the border. In fact, for any region Q one could deﬁne two epsilon ranges i and o for both interior and exterior error bounds and then treat the approximation factor as = i + o . There are numerous approaches one may take to solving these problems. Arya et al. [1] introduced a priority search algorithm for visiting nodes in a partition tree to solve nearestneighbor queries. Using their BBD tree structure, they were able to prove eﬃcient query times. Duncan et al. [13] show how this priority search could also solve farthest-neighbor queries. The nearest and farthest neighbor priority searching algorithms shown in Figures 26.2 and 26.3 come from [11]. In the approximate nearest-neighbor, respectively farthest-neighbor, search, nodes are visited in order of closest node, respectively farthest node. Nodes are extracted via an eﬃcient priority queue, such as the Fibonacci heap [10, 15]. Introduced by [3], the search technique used for the approximate range query is a modiﬁcation to the standard range searching algorithm for regular partition trees. We present the algorithm from [11] in Figure 26.4. In this algorithm, we have two diﬀerent query regions, the inner region Q and the outer region Q ⊇ Q. The goal is to return all points in S that lie inside Q, allowing some points to lie inside Q but none outside of Q . That is Q − Q deﬁnes a buﬀer zone that is the only place allowed for erroneous points. Whenever a node u is visited, if u is a leaf node, we simply check all of u’s associated data points. Otherwise, if Ru does not intersect Q, we know that none of its points can lie in Q, and we ignore u and its subtree. If Ru lies completely inside Q then all of the data points in its subtree must lie inside Q , and we report all points. Otherwise, we repeat the process on u’s two child nodes. For an -approximate range search, we deﬁne Q = {p ∈ IRd |δ(p, Q) ≤ OQ }. We note that this search algorithm can also be modiﬁed to return the count or sum of the weights of the

© 2005 by Chapman & Hall/CRC

Approximate Geometric Query Structures

26-5

ApproximateNearestNeighbor(T ,q,) Arguments: BSP tree, T , query point q, and error factor Returns: A (1 + )-nearest neighbor p Q ← root(T ) p←∞ do u ← Q.extractMin() if δ(u, q) > δ(p, q)/(1 + ) return p while u is not a leaf u1 ← leftChild(u) u2 ← rightChild(u) if δ(u1 , q) ≤ δ(u2 , q) Q.insert(δ(u2 , q), u2 ) u ← u1 else Q.insert(δ(u1 , q), u1 ) u ← u2 end while // u is now a leaf for all p in dataSet(u) if δ(p , q) < δ(p, q) p ← p repeat

FIGURE 26.2: The basic algorithm to perform nearest-neighbor priority searching.

points inside the approximate range rather than explicitly reporting the points. In all of these search algorithms, the essential criteria behind the running time is the observation that a non-terminating node in the search, one that requires expansion of its child nodes, is a node that must cross certain size boundaries. For example, in the approximate range searching algorithm, the only nodes expanded are those whose region lies partially inside Q, else it would be discarded, and partially outside Q , else it would be completely counted in the output size. A slightly more complex but similar argument applies for nearest and farthest neighbor algorithms. In the next section, we discuss a general theorem providing provable running time bounds for partition trees satisfying a fundamental packing argument.

26.4

Quasi-BAR Bounds

We are now ready to examine closely a suﬃcient condition for a data structure to guarantee eﬃcient performance on the aforementioned searches. Before we can proceed, we must ﬁrst discuss a few more basic deﬁnitions presented in Dickerson et al. [9]. For any region R, the region annulus with radius r, denoted AR,r is / R and δ(p, R) < r. A region R pierces an annulus the set of all points p ∈ IRd such that p ∈ AR,r if and only if there exist two points p, q ∈ R such that p ∈ R and q ∈ / R ∪ AR,r .

DEFINITION 26.3

In other words, an annulus AR,r contains all points outside but near the region R. If R were a sphere of radius r , this would be the standard deﬁnition of an annulus with inner radius r and outer radius r + r. For convenience, when the region and radius of an annulus are understood, we use A. Figure 26.5 illustrates the basic idea of a spherical annulus with multiple piercing regions. The core of the performance analysis for the searches lies in a critical packing argument.

© 2005 by Chapman & Hall/CRC

26-6

Handbook of Data Structures and Applications

ApproximateFarthestNeighbor(T ,q,) Arguments: BSP tree, T , query point q, and error factor Returns: A (1 − )-farthest neighbor p Q ← root(T ) p←q do u ← Q.extractMax() if ∆(u, q) ≤ δ(p, q) + D return p while u is not a leaf u1 ← leftChild(u) u2 ← rightChild(u) if ∆(u1 , q) ≥ ∆(u2 , q) Q.insert(∆(u2 , q), u2 ) u ← u1 else Q.insert(∆(u1 , q), u1 ) u ← u2 end while // u is now a leaf for all p in dataSet(u) if δ(p , q) > δ(p, q) p ← p repeat

FIGURE 26.3: The basic algorithm to perform farthest-neighbor priority searching.

ApproximateRangeSearch(u, Q, Q ) Arguments: Node u in a BSP tree, inner region Q, outer region Q Initially, u ← root(T ). Reports: All points in the approximate range defined by Q and Q if u is a leaf node for all p in dataSet(u) if p ∈ Q output p else if Ru ⊆ Q // The region lies completely inside Q output all points p in the subtree of u else if Ru ∩ Q = ∅ // The region lies partially inside Q call ApproximateRangeSearch(leftChild(u), Q, Q ) call ApproximateRangeSearch(rightChild(u), Q, Q )

FIGURE 26.4: The basic range search algorithm.

(a)

(b)

FIGURE 26.5: An example of a simple annulus region (a) with three other regions which pierce this annulus and (b) with several “fat” square regions. Observe that only a limited number of such “fat” squares can pierce the annulus.

© 2005 by Chapman & Hall/CRC

Approximate Geometric Query Structures

26-7

The packing lemmas work by bounding the number of disjoint regions that can pierce an annulus and hence simultaneously ﬁt inside the annulus, see Figure 26.5b. When this packing size is small, the searches are eﬃcient. Rather than cover each structure’s search analysis separately, we use the following more generalized notion from Dickerson et al. [9]. Given a BSP tree T and a region annulus A, let P(A) denote the largest set of disjoint nodes in T whose associated regions pierce A. A class of BSP trees is a ρ(n)-quasi-BAR tree if, for any tree T in the class constructed on a set S of n points in IRd and any region annulus AR,r , |P(AR,r )| ≤ ρ(n)VA /rd , where VA is the volume of AR,r . The function ρ(n) is called the packing function. DEFINITION 26.4

Basically, the packing function ρ(n) represents the maximum number of regions that can pierce any query annulus. By proving that a class of BSP trees is a ρ(n)-quasi-BAR tree, we can automatically inherit the following theorems proven in [1, 3, 13] and generalized in [9]:

Suppose we are given a ρ(n)-quasi-BAR tree T with depth DT = Ω(log n) constructed on a set S of n points in IRd . For any query point q, the priority search algorithms in Figures 26.2 and 26.3 ﬁnd respectively a (1 + )-nearest and a (1 − )farthest neighbor to q in O(1−d ρ(n)DT ) time.

THEOREM 26.1

Suppose we are given a ρ(n)-quasi-BAR tree T with depth DT constructed on a set S of n points in IRd . For any convex query region Q, the search algorithm in Figure 26.4 solves an -approximate range searching query in T in O(1−d ρ(n)DT ) time (plus output size in the reporting case). For any general non-convex query region Q, the time required is O(−d ρ(n)DT ) (plus output size).∗ THEOREM 26.2

Trivially, ρ(n) is always less than n but this accomplishes little in the means of getting good bounds. Having a class of trees with both a good packing function and low depth helps guarantee good asymptotic performance in answering geometric queries. One approach to ﬁnding such classes is to require that all regions produced by the tree be fat. The idea behind this is that there is a limit to the number of disjoint fat regions that pierce an annulus dependent upon the aspect ratio of the regions and the thickness of the annulus. Unfortunately, guaranteeing fat regions and good depth is not readily possible using the standard BSP trees like k-d trees and octrees. Imagine building a k-d tree using only axisparallel partitioning cuts. Figure 26.6 illustrates such an example. Here the majority of the points are concentrated at a particular corner of a rectangular region. Now, any axisparallel cut is either too close to the opposing face or does not partition the points in the region well, resulting in large tree depth. Fortunately, there are structures that can provably be shown to be ρ(n)-quasi-BAR trees with small values for ρ(n) and DT . The next few sections discuss some of these structures.

∗ Actually, BBD trees and BAR trees have a slightly better running time for these searches and we mention this in the respective sections.

© 2005 by Chapman & Hall/CRC

26-8

Handbook of Data Structures and Applications

p

p

(a)

(b)

FIGURE 26.6: (a) A bad corner of a simple rectangular region with nearly all of the points clustered near a corner. Notice a cut in either the x or y direction dividing the points located inside p would cause a “skinny” region. (b) The same situation in IR3 .

26.5

BBD Trees

Arya et al. [1] introduced the ﬁrst BSP tree structure to guarantee both balanced aspect ratio and O(log n) depth. In addition, the aspect ratio achieved allowed them to prove a packing constraint. From this, one can verify that the BBD tree has a packing function of ρ(n) = O(1) where the constant factor depends on the dimension d. In the following section, we describe the basic construction of the BBD tree using terminology from [3]. Every region Ru associated with a node u in a BBD tree is either an outer rectangular box or the set theoretic diﬀerence between an outer rectangular box and an inner rectangular box. The size of a box is the length of its longest side and the size of Ru is the size of the outer box. In order to guarantee balanced aspect ratio for these cells, Arya et al. [1] introduced a stickiness restriction on the inner box. Brieﬂy described, an inner box is sticky if the distance between the inner box and every face on the outer box is either 0 or not less than the size of the inner box. Although not necessary to the structure, we shall assume that the aspect ratio of the outer box is no more than two. The construction of the BBD tree is done by a sequence of alternating splitting and shrinking operations. In the (midpoint) split operation, a region is bisected by a hyperplane cut orthogonal to one of the longest sides. This is essentially the standard type of cut used in a quadtree or octree. Its simplicity, speed of computation, and eﬀectiveness are major reasons for preferring these operations. The shrink operation partitions a region by a box lying inside the region, creating an inner region. The shrink operation is actually part of a sequence of up to three operations called a centroid shrink. The centroid shrink attempts to partition the region into a small number of subregions Ri such that |Ri | ≤ 2|Ru |/3. When Ru is simply an outer box, with no inner box, a centroid operation is performed with one shrink operation. The inner partitioning box is found by conceptually applying midpoint split operations recursively on the subregion with the larger number of points. The process stops when the subregion contains no more than 2|Ru |/3 points. The outer box of this subregion is the inner partitioning box for the shrink operation. The other merely conceptual midpoint splits are simply ignored. Choosing this inner box guarantees that both subregions produced by the split have no more than 2|Ru |/3 points. This can be seen by observing that the inner box has no more than 2|Ru |/3 points and also must contain at least |Ru |/3 points. The technique as stated is not theoretically ideal because the number of midpoint split operations computed cannot be bounded. Each midpoint split

© 2005 by Chapman & Hall/CRC

Approximate Geometric Query Structures

(a)

26-9

(b)

(c)

FIGURE 26.7: Examples of (a) multiple iterations of the midpoint split rule, (b) centroid shrinking, with dashed lines representing the conceptual midpoint splits and the highlighted inner box being the actual partition cut, (c) centroid shrinking with an inner box. In the ﬁnal example, the original inner box is solid, the ﬁnal midpoint split is shown with slightly extended dotted lines, and the new inner box partition cut is shown shaded in gray.

may not partition even a single point. Arya et al. [1, 3] describe a simple solution to this problem, which repeatedly computes the smallest bounding midpoint box using a technique due to Clarkson [8]. When Ru has an inner box associated with it, we cannot simply ﬁnd another inner box as this would violate the restriction on having only one inner box. Let bi represent the original inner box. The solution is to proceed as in the previous centroid shrink operation, repeatedly applying midpoint split operations on the subregion with the larger number of points. However, we now stop in one of two situations; when the size of the larger subregion either has no more than 2|Ru |/3 points or no longer contains bi . In the former case, let b be the outer box of this subregion. In the latter case, or in the event both cases happen, let b represent the outer box of the subregion prior to this ﬁnal split. We perform a shrink operation using b as the partitioning box. Since b clearly contains bi , the subregion associated with the original outer box continues to have one inner box, albeit a slightly larger one than its parent. The subregion R1 , whose outer box is b, also has one inner box, bi . If |R1 | > 2|Ru |/3, we perform a midpoint split on this subregion. Let R2 be the larger subregion formed by this last split, which we know does not contain bi . Since R2 does not contain an inner box, if R2 contains more than 2|Ru |/3 points, we simply perform the basic shrink operation thus dividing R2 into two smaller subregions as well. Clearly, all the subregions produced by this centroid shrink have no more than 2|Ru |/3 points. Figure 26.7 shows the three main operations, splitting, shrinking, and the three-step shrinking process. In addition to this simple version of the BBD tree, there are more ﬂexible variations on this approach. The reader should refer to [1, 3] for details on an eﬃcient O(dn log n) construction algorithm and for discussions on some of the BBD variations. To highlight a few options, at any stage in the construction, rather than alternate between shrinking and splitting operations, it is preferable to perform split operations whenever possible, so long as the point set is divided evenly after every few levels, and to use the more costly shrinking operations only when necessary. Another approach is to use a more ﬂexible split operation, a fair split, which attempts to partition the points in the region more evenly. In this case, more care has to be taken to avoid producing skinny regions and to avoid violating the stickiness property; however, as was shown experimentally, the ﬂexibility provides for better experimental performance. The following theorem summarizes the basic result [1, 3]: Given a set S of n data points in IRd , in O(dn log n) time it is possible to construct a BBD tree such that THEOREM 26.3

© 2005 by Chapman & Hall/CRC

26-10

Handbook of Data Structures and Applications

1. the tree has O(n) nodes and depth O(log n), 2. the regions have outer boxes with balanced aspect ratio and inner boxes that are sticky to the outer box, 3. the sizes of the regions are halved after every 2d levels in the tree. The above conditions imply that the BBD tree is an O(1)-quasi-BAR tree. The size reduction constraint above helps guarantee a slightly better performance for geometric queries than given for general quasi-BAR trees. In particular, Arya and Mount [3] show allows range on BBD trees to be solved in O(2d log n + √ thatd the size reduction √ queries d 3 d−1 d(3 d/) ) time, or O(2 log n + d (3 d/) ) for convex queries plus output size. Duncan [11] later extended the separation of the n and dependencies to nearest and farthest neighbor queries showing that the running time for both is O(log n + 1−d log(1/)) for ﬁxed dimension d.

26.6

BAR Trees

The balanced aspect ratio tree introduced in [12] for the basic two-dimensional case and subsequently revised to higher dimensions in [11, 13] can be shown to have a packing function of ρ(n) = O(1) where the constant factor depends on the dimension d and a user-speciﬁed aspect ratio parameter α. In the following section, we borrow terminology from [11, 13]. Unlike BBD trees, k-d trees, and octrees, BAR trees do not exclusively use axis-orthogonal hyperplane cuts. Instead, to achieve simultaneously the goals of good aspect ratio, balanced depth, and convex regions, cuts in several diﬀerent directions are used. These directions are called canonical cuts, and the particular choice and size of canonical cuts is essential in creating good BAR trees. DEFINITION 26.5

The following terms relate to speciﬁc cutting directions:

• A canonical cut set, C = { v1 , v2 , . . . , vγ }, is a collection of γ not necessarily independent vectors that span IRd (thus, γ ≥ d). • A canonical cut direction is any vector vi ∈ C. • A canonical cut is any hyperplane, H, in IRd with a normal in C. • A canonical region is any region formed by the intersection of a set of hyperspaces deﬁned by canonical cuts, i.e., a convex polyhedron in IRd with every facet having a normal in C. Figure 26.8a shows a region composed of three cut directions (1, 0), (0, 1), and (1, −1), or simply cuts along the x, y, and x − y directions. After cutting the region at the dashed line c, we have two regions R1 and R2 . In R2 notice the left side is replaced by the new cut c, and more importantly the diagonal cut is no longer tangential to R2 . The following deﬁnition describes this property more speciﬁcally. DEFINITION 26.6 A canonical cut c deﬁnes a canonical region R, written c ∈ R, if and only if c is tangential to R. In other words, c intersects the border of R. For a canonical region R, any two parallel canonical cuts b, c ∈ R are opposing canonical cuts. For any canonical region R, we deﬁne the canonical bounding cuts with respect to a direction vi ∈ C to be the two unique opposing canonical cuts normal to vi and tangent to R. We often

© 2005 by Chapman & Hall/CRC

Approximate Geometric Query Structures

c R1

R2

26-11

min

max (a)

(b)

FIGURE 26.8: (a) An example of a canonical region of three cut directions, x,y, and x − y. Observe the three widths highlighted with lines and the min and max widths of the region. The left facet associated with the x direction is drawn in bold. The bold dashed line in the center represents a cut c and the respective subregions R1 and R2 . (b) An example of a similar region highlighting the two shield regions associated with the x-direction for α ≈ 4. Notice the size diﬀerence between the two shield regions corresponding to the associated facet sizes. refer to these cuts as bi and ci or simply b and c when i is understood from the context. Intuitively, R is “sandwiched” between bi and ci . To avoid confusion, when referring to a canonical cut of a region R, we always mean a canonical bounding cut. For any canonical bounding cut, c, the facet of c ∈ R, facetc (R), is deﬁned as the region formed by the intersection of R with c. The canonical set used to deﬁne a partition tree can vary from method to method. For example, the standard k-d tree algorithm [4] uses a canonical set composed of all axisorthogonal directions. For a canonical set C and a canonical region R, we deﬁne the following terms (see Figure 26.8a):

DEFINITION 26.7

• For a canonical direction vi ∈ C, the width of R in the direction vi , written widthi (R), is the distance between bi and ci , i.e., widthi (R) = δ(bi , ci ). • The maximum side of R is max(R) = maxi∈C (widthi (R)). • The minimum side of R is min(R) = mini∈C (widthi (R)). For simplicity, we also refer to the facets of a region in the same manner. We deﬁne the following terms for a facet of a region R, f = facetc (R): • The width of f in the direction vi is widthi (f ) = δ(bi , ci ) where bi and ci are the opposing bounding cuts of f in the direction vi . • The maximum side of f is max(f ) = maxi∈C (widthi (R)). • In addition, for any canonical cut c ∈ R, the length of c, lenc (R), is deﬁned as max(facetc (R)). When using a canonical cut ci to partition a region R into two pieces R1 and R2 as the cut gets closer to a side of R, one of the two respective regions gets increasingly skinnier.

© 2005 by Chapman & Hall/CRC

26-12

Handbook of Data Structures and Applications

At some point, the region is no longer α-balanced, see Figure 26.8b. This threshold region is referred to as a shield region and is deﬁned in [11] as the following: DEFINITION 26.8 Given an α-balanced canonical region R and a canonical cut direction vi , sweep a cut c from the opposing cut bi toward ci . Let P be the region of R between c and ci . Sweep c until either region P is empty or just before asp(P ) > α. If P is not empty, then P has maximum aspect ratio. Call the region P the shield region of ci in R, shieldci (R). Let the maximal outer shield, mosi (R), be the shield region shieldbi (R) or shieldci (R) such that |mosi (R)| = max(|shieldbi (R)|, |shieldci (R)|), i.e., the maximal outer shield is the shield region with the greater number of points.

DEFINITION 26.9 An α-balanced canonical region, R, is one-cuttable with reduction factor β, where 1/2 ≤ β < 1, if there exists a cut c1 ∈ C, called a one-cut, dividing R into two subregions R1 and R2 such that the following conditions hold:

1. R1 and R2 are α-balanced canonical regions, 2. |R1 | ≤ β|R| and |R2 | ≤ β|R|. DEFINITION 26.10 An α-balanced canonical region, R, is k-cuttable with reduction factor β, for k > 1, if there exists a cut ck ∈ C, called a k-cut, dividing R into two subregions R1 and R2 such that the following conditions hold:

1. R1 and R2 are α-balanced canonical regions, 2. |R2 | ≤ β|R|, 3. Either |R1 | ≤ β|R| or R1 is (k − 1)-cuttable with reduction factor β. In other words, the sequence of cuts, ck , ck−1 , . . . , c1 , results in k + 1 α-balanced canonical regions each containing no more than β|R| points. If the reduction factor β is understood, we simply say R is k-cuttable.

DEFINITION 26.11 For a canonical cut set, C, a binary space partition tree T constructed on a set S is a BAR tree with maximum aspect ratio α if every region R ∈ T is α-balanced.

Figure 26.9 illustrates an algorithm to construct a BAR tree from a sequence of k-cuttable regions. THEOREM 26.4 For a canonical cut set, C, if every possible α-balanced canonical region is k-cuttable with reduction factor β, then a BAR tree with maximum aspect ratio α can be constructed with depth O(k log1/β n), for any set S of n points in IRd .

The main challenge in creating a speciﬁc instance of a BAR tree is in deﬁning a canonical set C such that every possible α-balanced canonical region is k-cuttable with reduction factor β for reasonable choices of α, β, and k. The α-balanced regions produced help BAR trees have the following packing function.

© 2005 by Chapman & Hall/CRC

Approximate Geometric Query Structures

26-13

CreateBarTree(u,Su,Ru ,α,β) Arguments: Current node u to build (initially the root), Su is the current point set (initially S) Ru is the α-balanced region containing Su (initially a bounding hypercube of S) (Optional) node u can contain any of the following: region Ru , sample point p ∈ Su , size |Su | if |Su | ≤ leafSize then (leaf) node u stores the set Su return find ci , an i-cut for Ru , for smallest value of i (internal) node u stores ci create two child nodes of u, v and w partition Su into Sv and Sw by the cut si partition Ru into Rv and Rw by the cut si call CreateBarTree(v,Sv,Rv ,α,β) call CreateBarTree(w,Sw,Rw ,α,β)

FIGURE 26.9: General BAR tree construction algorithm. THEOREM 26.5 For a canonical cut set, C, if every possible α-balanced canonical region is k-cuttable with reduction factor β, then the class of BAR trees with maximum aspect ratio α has a packing function ρ(n) = O(αd ) where the hidden constant factor depends on the angles between the various cut directions. For ﬁxed α, this is constant.

Theorems 26.4 and 26.5 immediately show us that approximate geometric nearest-neighbor and farthest-neighbor queries can be solved in O(1−d log n) time and approximate geometric range searches for convex and non-convex regions take, respectively, O(1−d log n) and O(−d log n) plus the output size. As with the BBD tree, in fact, these structures can also be shown to have running times of O(log n + 1−d log 1 ) for nearest-neighbor and farthestneighbor queries [11] and O(log n + 1−d ) and O(log n + −d ) for convex and non-convex range queries [3]. Another examination of Figure 26.6 shows why simple axis-orthogonal cuts cannot guarantee k-cuttability. By concentrating a large number of points at an actual corner of the rectangular region, no sequence of axis-orthogonal cuts will divide the points and maintain balanced aspect ratio regions. We can further extend this notion of a bad corner to a general κ-corner associated with a canonical region R. DEFINITION 26.12 For a canonical cut set C and a canonical region R, a κ-corner B ∈ R is a ball with center ρ and radius κ such that, for every cut direction vi ∈ C with bounding cuts bi and ci , either bi or ci intersects B, i.e. min(δ(ρ, bi ), δ(ρ, ci )) ≤ κ.

When κ = 0, we are not only deﬁning a vertex of a region but a vertex which is tangential to one of every cut direction’s bounding planes. As described in [11], these corners represent the worst-case placement of points in the region. These corners can always exist in regions. However, if one of the facets associated with this corner has size proportional to (or smaller than) the κ ball, then we can still get close enough to this facet and properly divide the point set without introducing unbalanced regions. The following property formalizes this notion more: Property 26.13 A canonical cut set C satisﬁes the κ-Corner Property if for any κ ≥ 0 and any canonical region R containing a κ-corner B ∈ R, there exists a canonical cut c ∈ R

© 2005 by Chapman & Hall/CRC

26-14

Handbook of Data Structures and Applications

intersecting B such that lenc (R) ≤ Fκ κ for some constant Fκ . In particular, notice that if κ = 0, one of the bounding cutting planes must intersect at a single point. The advantage to this can be seen in the two-dimensional case. Construct any canonical region using any three cutting directions, for simplicity use the two axisorthogonal cuts and one cut with slope +1. It is impossible to ﬁnd a κ-corner without having at least one of the three bounding sides be small with respect to the corner. This small side has a matching very small shield region. Unfortunately, having a small shield region does not mean that the initial region is one-cuttable. The points may all still be concentrated within this small shield region. However, it is possible that this small shield region is one-cuttable. In fact, in [11], it is shown that there exist canonical cut sets that guarantee two-cuttability for suﬃcient values of α, β, and σ, where the σ parameter is used in the construction. The suﬃciency requirements depend only on certain constant properties associated with the angles of the canonical cut set labeled here as Fmin , Fmax , Fbox , and Fκ . For speciﬁc values of these constants, see [11]. Figure 26.10 describes an algorithm to ﬁnd an appropriate cut. The general idea is to ﬁnd the smallest (in physical size) shield region containing a majority of the points. If none exist, the region must be one-cuttable. Otherwise, we take this shield region and pull the partitioning cut back slightly,† increasing the size of this particular shield region. Given an appropriate cut set and various constant bounds, we can guarantee that this new region is one-cuttable. The following theorems summarize this result [11]: (Two-Cuttable Theorem) Suppose we are given a canonical cut set, C, which satisﬁes the κ-Corner Property 26.13. Any α-balanced canonical region R is two-cuttable if the following three conditions are met: THEOREM 26.6

β ≥ (d + 1)/(d + 2),

(26.1)

αFmin /4(Fbox + 1) > σ > (2Fmax + Fκ ), and

(26.2)

α > 4(Fbox + 1)(2Fmax + Fκ )/Fmin + Fmax /Fmin.

(26.3)

Theorems 26.6 and 26.4 can be combined to yield the following theorem: THEOREM 26.7 Suppose we are given a canonical cut set C that satisﬁes the κ-Corner Property and an α > f (C). A BAR tree with depth O(d log n) and balancing factor α can be constructed in O(g(C)dn log n) time, where f and g are constant functions depending on properties of the canonical set. In particular, the running time of the algorithm is O(n log n) for ﬁxed dimensions and ﬁxed canonical sets.

Let us now present two cut sets that do satisfy the κ-Corner Property. The two cut sets we present below are composed of axis-orthogonal cuts and one other set of cuts. Let us give speciﬁc names to a few vector directions. DEFINITION 26.14

† This

A vector v = (x0 , x1 , x2 , . . . , xd ) is

is actually only necessary in dimensions greater than 2.

© 2005 by Chapman & Hall/CRC

Approximate Geometric Query Structures

26-15

ComputeTwoCut(u) Arguments: An α-balanced node u in a BAR tree Returns: A one or two-cut for u for all ci ∈ C if ci is a one-cut, return ci let P be the smallest maximal outer shield of R let c = ci be the bounding cut associated with P let c be the cut parallel to c intersecting R such that δ(c, c ) = widthi (P ) + lenc (R)/σ return c // c partitions R into two α-balanced regions R1 and R2 // |R2 | ≤ β|R| // R1 incident to ci is one-cuttable

FIGURE 26.10: An algorithm to ﬁnd either a one or two cut in a region. • an axis-orthogonal cut if xi = 0 for all values except one where xj = 1, e.g. (0, 0, 1, 0), • a corner cut if xi = ±1 for all values of i, e.g. (1, 1, −1, −1), • a wedge cut if xi = 0 for all values except two where xj , xi = ±1, e.g. (0, 1, −1, 0). The Corner Cut Canonical Set Cc is the set of all axis-orthogonal cuts and corner cuts. The Wedge Cut Canonical Set Cw is the set of all axis-orthogonal cuts and wedge cuts. Notice that |Cc | is Θ(2d ) and |Cw | is Θ(d2 ). Although the corner cut canonical set does not necessarily have to be as large as this, the complexity of the corner cut itself means sidedness tests take longer than axis-orthogonal and wedge cuts, namely d computations instead of 1 or 2. The above two canonical sets satisfy the κ-Corner Property 26.13 and from Theorem 26.7, we get the following two corollaries [11]: For the Corner Cut Canonical set Cc , a BAR tree with depth O(d log n) and balancing factor α = Ω(d2 ) can be constructed in O(n log n) time.

COROLLARY 26.1

COROLLARY 26.2 For the Wedge √ Cut Canonical set Cw , a BAR tree with depth O(d log n) and balancing factor α = Ω( d) can be constructed in O(n log n) time.

To get the exact values needed, see [11]. However, it is important to note that the α bounds above are overestimates of the minimum value needed. In practice, one should try an initially small value of α, say 6, and when that fails to provide two-cuttability double the value for the lower subtree levels. In this manner, one can arrive at the true minimum value in O(log α) such iterations, if necessary, without having to calculate it. Since the minimum α needed in both cut sets is O(d2 ), this adds only an O(log(d)) factor to the depth.

26.7

Maximum-Spread k-d Trees

One very popular class of BSP tree is the k-d tree, see Chapter 16. Although there are very few theoretical bounds known on these structures, there is a lot of empirical evidence that shows them to be extremely eﬃcient for numerous geometric applications. In particular, one variant the maximum-spread k-d tree has long been considered an ideal k-d tree. Given

© 2005 by Chapman & Hall/CRC

26-16

Handbook of Data Structures and Applications

a set of points S and a particular axis dimension xd , deﬁne the spread of S in xd to be the diﬀerence between the minimum and maximum coordinates of the points in that dimension. The maximum-spread k-d tree is formed by choosing at each internal node a cutting plane orthogonal to the axis of maximum spread placed at the median point in this direction, see for example [16]. Arya et al. [1] applied the maximum-spread k-d tree to their approximate nearest-neighbor searching algorithm and experimentally showed that they were comparable to the theoretically eﬃcient BBD tree. Later Dickerson et al. [9, 11] proved the following theorem regarding maximum-spread k-d trees, referred to there as longest-side k-d trees: THEOREM 26.8 Suppose we are given a maximum-spread k-d tree T constructed on a set S of n points in IRd . Then the packing function ρ(n) of T for a region annulus A is O(logd−1 n). That is, the class of maximum-spread k-d trees is an O(logd−1 n)-quasi-BAR tree.

Although the bound is not as good as for BBD trees and BAR trees, the simplicity of the structure yields low constant factors and explains why in practice these trees perform so well. Experimental comparisons to BBD trees and BAR trees veriﬁed this result and showed that only for very highly clustered data did the dependency on logd−1 n become prominent [1, 11]. In practice, unless data is highly clustered and the dimension is moderately large, the maximal-spread k-d tree is an ideal structure to use. However, for such data sets both the BBD tree and the BAR tree revert to the same behavior as the maximal-spread tree, and they perform well even with highly clustered data. Because of its simpler structure, the BBD tree is potentially more practical than the BAR tree.

Acknowledgment This work was supported, in part, by the National Science Foundation under grant CCR0098068.

References [1] Arya, Mount, Netanyahu, Silverman, and Wu. An optimal algorithm for approximate nearest neighbor searching in ﬁxed dimensions. J. ACM, 45(6):891–923, 1998. [2] S. Arya and D. M. Mount. Approximate nearest neighbor queries in ﬁxed dimensions. In Proc. 4th ACM-SIAM Sympos. Discrete Algorithms, pages 271–280, 1993. [3] Sunil Arya and David M. Mount. Approximate range searching. Comput. Geom., 17(3-4):135–152, 2000. [4] J. L. Bentley. Multidimensional binary search trees used for associative searching. Commun. ACM, 18(9):509–517, 1975. [5] P. B. Callahan and S. R. Kosaraju. A decomposition of multidimensional point sets with applications to k -nearest-neighbors and n-body potential ﬁelds. J. ACM, 42:67– 90, 1995. [6] Bernard Chazelle. Lower bounds on the complexity of polytope range searching. J. Amer. Math. Soc., 2:637–666, 1989. [7] Bernard Chazelle and Emo Welzl. Quasi-optimal range searching in spaces of ﬁnite VC-dimension. Discrete Comput. Geom., 4:467–489, 1989. [8] K. L. Clarkson. Fast algorithms for the all nearest neighbors problem. In Proc. 24th Annu. IEEE Sympos. Found. Comput. Sci., pages 226–232, 1983. [9] M. Dickerson, C. A. Duncan, and M. T. Goodrich. K-D trees are better when cut on

© 2005 by Chapman & Hall/CRC

Approximate Geometric Query Structures

[10]

[11] [12]

[13] [14] [15] [16] [17] [18]

26-17

the longest side. In ESA: Annual European Symposium on Algorithms, volume 1879 of Lecture Notes Comput. Sci., pages 179–190, 2000. J. R. Driscoll, H. N. Gabow, R. Shrairaman, and R. E. Tarjan. Relaxed heaps: An alternative to Fibonacci heaps with applications to parallel computation. Commun. ACM, 31:1343–1354, 1988. C. A. Duncan. Balanced Aspect Ratio Trees. Ph.D. thesis, Dept. of Computer Science, Johns Hopkins Univ., 1999. C. A. Duncan, M. T. Goodrich, and S. G. Kobourov. Balanced aspect ratio trees and their use for drawing very large graphs. J. Graph Algorithms and Applications, 4:19–46, 2000. C. A. Duncan, M. T. Goodrich, and S. G. Kobourov. Balanced aspect ratio trees: Combining the advantages of k-d trees and octrees. J. Algorithms, 38:303–333, 2001. R. A. Finkel and J. L. Bentley. Quad trees: a data structure for retrieval on composite keys. Acta Inform., 4:1–9, 1974. M. Fredman and R. E. Tarjan. Fibonacci heaps and their uses in improved network optimization problems. J. ACM, 34:596–615, 1987. J. H. Friedman, J. L. Bentley, and R. A. Finkel. An algorithm for ﬁnding best matches in logarithmic expected time. ACM Trans. Math. Softw., 3:209–226, 1977. F. P. Preparata and M. I. Shamos. Computational Geometry: An Introduction. Springer-Verlag, New York, NY, 1985. H. Samet. The Design and Analysis of Spatial Data Structures. Addison-Wesley, Reading, MA, 1990.

© 2005 by Chapman & Hall/CRC

27 Geometric and Spatial Data Structures in External Memory 27.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27-1

Disk Model • Design Criteria for External Memory Data Structures • Overview of Chapter

27.2 27.3

EM Algorithms for Batched Geometric Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Memory Tree Data Structures . . . . . . . .

27-4 27-9

B-trees and Variants • Weight-Balanced B-trees • Parent Pointers and Level-Balanced B-trees • Buﬀer Trees

27.4

Spatial Data Structures and Range Search . . . . . 27-13 Linear-Space Spatial Structures • R-trees • Bootstrapping for 2-D Diagonal Corner and Stabbing Queries • Bootstrapping for Three-Sided Orthogonal 2-D Range Search • General Orthogonal 2-D Range Search • Lower Bounds for Orthogonal Range Search

27.5 27.6

Logarithmic Method for Decomposable Search Problems • Continuously Moving Items

Jeﬀrey Scott Vitter Purdue University

27.1

Related Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-23 Dynamic and Kinetic Data Structures . . . . . . . . . . 27-23

27.7

Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-26

Introduction

The Input/Output communication (or simply I/O ) between the fast internal memory and the slow external memory (such as disk) can be a bottleneck when processing massive amounts of data, as is the case in many spatial and geometric applications [124]. Problems involving massive amounts of geometric data are ubiquitous in spatial databases [82, 106, 107], geographic information systems (GIS) [82, 106, 119], constraint logic programming [73, 74], object-oriented databases [130], statistics, virtual reality systems, and computer graphics [55]. NASA’s Earth Observing System project, the core part of the Earth Science Enterprise (formerly Mission to Planet Earth), produces petabytes (1015 bytes) of raster data per year [53]. Microsoft’s TerraServer online database of satellite images is over one terabyte in size [115]. A major challenge is to develop mechanisms for processing the data, or else much of the data will be useless. One promising approach for eﬃcient I/O is to design algorithms and data structures that bypass the virtual memory system and explicitly manage their own I/O. We refer to such

27-1

© 2005 by Chapman & Hall/CRC

27-2

Handbook of Data Structures and Applications

algorithms and data structures as external memory (or EM ) algorithms and data structures. (The terms out-of-core algorithms and I/O algorithms are also sometimes used.) We concentrate in this chapter on the design and analysis of EM memory data structures for batched and online problems involving geometric and spatial data. Luckily, many problems on geometric objects can be reduced to a small core of problems, such as computing intersections, convex hulls, multidimensional search, range search, stabbing queries, point location, and nearest neighbor search. In this chapter we discuss useful paradigms for solving these problems in external memory.

27.1.1

Disk Model

The three primary measures of performance of an algorithm or data structure are the number of I/O operations performed, the amount of disk space used, and the internal (parallel) computation time. For reasons of brevity we shall focus in this chapter on only the ﬁrst two measures. Most of the algorithms we mention run in optimal CPU time, at least for the single-processor case. We can capture the main properties of magnetic disks and multiple disk systems by the commonly used parallel disk model (PDM) introduced by Vitter and Shriver [125]. Data is transferred in large units of blocks of size B so as to amortize the latency of moving the read-write head and waiting for the disk to spin into position. Storage systems such as RAID use multiple disks to get more bandwidth [38, 66]. The principal parameters of PDM are the following: N

=

problem input data size (in terms of items),

M B

= =

size of internal memory (in terms of items), size of disk block (in terms of items), and

D

=

# independent disks,

where M < N and 1 ≤ DB ≤ M . Queries are naturally associated with online computations, but they can also be done in batched mode. For example, in the batched orthogonal 2-D range searching problem discussed in Section 27.2, we are given a set of N points in the plane and a set of Q queries in the form of rectangles, and the problem is to report the points lying in each of the Q query rectangles. In both the batched and online settings, the number of items reported in response to each query may vary. We thus deﬁne two more performance parameters: Q Z

= number of input queries (for a batched problem), and = query output size (in terms of items).

If the problem does not involve queries, we set Q = 0. It is convenient to refer to some of the above PDM parameters in units of disk blocks rather than in units of data items; the resulting formulas are often simpliﬁed. We deﬁne the lowercase notation n=

N , B

m=

M , B

z=

Z , B

q=

Q , B

to be the problem input size, internal memory size, query output size, and number of queries, respectively, in units of disk blocks. For simplicity, we restrict our attention in this chapter to the single-disk case D = 1. The batched algorithms we discuss can generally be sped up by using multiple disks in an optimal

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory disk

disk

27-3

disk

D disks Block I/O size B

internal memory

size M

CPUs

FIGURE 27.1: Parallel Disk Model. manner using the load balancing techniques discussed in [124]. Online data structures that use a single disk can generally be transformed automatically by the technique of disk striping to make optimal use of multiple disks [124]. Programs that perform well in terms of PDM will generally perform well when implemented on real systems [124]. More complex and precise models have been formulated [22, 103, 111]. Hierarchical (multilevel) memory models are discussed in [124] and its references. Cache-oblivious models are discussed in Chapter 34. Many of the algorithm design techniques we discuss in this chapter, which exploit data locality so as to minimize I/O communication steps, form the basis for algorithms in the other models.

27.1.2

Design Criteria for External Memory Data Structures

The data structures we examine in this chapter are used in batched algorithms and in online settings. In batched problems, no preprocessing is done, and the entire ﬁle of data items must be processed, often by streaming the data through the internal memory in one or more passes. Queries are done in a batched manner during the processing. The goal is generally twofold: B1. to solve the problem in O (n + q) logm n + z I/Os, and B2. to use only a linear number O(n + q) of blocks of disk storage. Most nontrivial problems require the same number of I/Os as does sorting. In particular, criterion B1 is related to the I/O complexity of sorting N items in the PDM model, which is O(n logm n) [124]. Online data structures support query operations in a continuous manner. When the data items do not change and the data structure can be preprocessed before any queries are made, the data structure is known as static. When the data structure supports insertions and deletions of items, intermixed with the queries, the data structure is called dynamic. The primary theoretical challenges in the design and analysis of online EM data structures are threefold: O1. to answer queries in O(logB N + z) I/Os, O2. to use only a linear number O(n) of blocks of disk storage, and O3. to do updates (in the case of dynamic data structures) in O(logB N ) I/Os. Criteria O1–O3 correspond to the natural lower bounds for online search in the comparison model. The three criteria are problem-dependent, and for some problems they cannot be met. For dictionary queries, we can do better using hashing, achieving O(1) I/Os per query on the average.

© 2005 by Chapman & Hall/CRC

27-4

Handbook of Data Structures and Applications

Criterion O1 combines together the O(logB N ) I/O cost for the search with the O(z) I/O cost for reporting the output. When one cost is much larger than the other, the query algorithm has the extra freedom to follow a ﬁltering paradigm [35], in which both the search component and the output reporting are allowed to use the larger number of I/Os. For example, when the output size Z is large, the search component can aﬀord to be somewhat sloppy as long as it doesn’t use more than O(z) I/Os; when Z is small, the Z output items do not have to reside compactly in only O(z) blocks. Filtering is an important design paradigm in online EM data structures. For many of the batched and online problems we consider, there is a data structure (such as a scanline structure or binary search tree) for the internal memory version of the problem that can answer each query in O(log N +Z) CPU time, but if we use the same data structure naively in an external memory setting (using virtual memory to handle page management), a query may require Ω(log N + Z) I/Os, which is excessive.∗ The goal for online algorithms is to build locality directly into the data structure and explicitly manage I/O so that the log N and Z terms in the I/O bounds of the naive approach are replaced by logB N and z, respectively. The relative speedup in I/O performance, namely (log N + Z)/(logB N + z), is at least (log N )/ logB N = log B, which is signiﬁcant in practice, and it can be as much as Z/z = B for large Z. For batched problems, the I/O performance can be improved further, since the answers to the queries do not need to be provided immediately but can be reported as a group at the end of the computation. For the batched problems we consider in this chapter, the Q = qB queries collectively use O(q logm n + z) I/Os, which is about B times less than a naive approach.

27.1.3

Overview of Chapter

In the next section, we discuss batched versions of geometric search problems. One of the primary methods used for batched geometric problems is distribution sweeping, which uses a data structure reminiscent of the distribution paradigm in external sorting. Other useful batched techniques include persistent B-trees, batched ﬁltering, external fractional cascading, external marriage-before-conquest, and batched incremental construction. The most popular EM online data structure is the B-tree structure, which provides excellent performance for dictionary operations and one-dimensional range searching. We give several variants and applications of B-trees in Section 27.3. We look at several aspects of multidimensional range search in Section 27.4 and related problems such as stabbing queries and point location. Data structures for other variants and related problems such as nearest neighbor search are discussed in Section 27.5. Dynamic and kinetic data structures are discussed in Section 27.6. A more comprehensive survey of external memory data structures appears in [124].

27.2

EM Algorithms for Batched Geometric Problems

Advances in recent years have allowed us to solve a variety of batched geometric problems optimally, meeting both optimality Criteria B1 and B2 of Section 27.1.2. These problems include

∗ We use the notation log N to denote the binary (base 2) logarithm log N . For bases other than 2, the base 2 will be speciﬁed explicitly, as in the base-B logarithm logB N .

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-5

1. Computing the pairwise intersections of N segments in the plane and their trapezoidal decomposition, 2. Finding all intersections between N nonintersecting red line segments and N nonintersecting blue line segments in the plane, 3. Answering Q orthogonal 2-D range queries on N points in the plane (i.e., ﬁnding all the points within the Q query rectangles), 4. Constructing the 2-D and 3-D convex hull of N points, 5. Voronoi diagram and Triangulation of N points in the plane, 6. Performing Q point location queries in a planar subdivision of size N , 7. Finding all nearest neighbors for a set of N points in the plane, 8. Finding the pairwise intersections of N orthogonal rectangles in the plane, 9. Computing the measure of the union of N orthogonal rectangles in the plane, 10. Computing the visibility of N segments in the plane from a point, and 11. Performing Q ray-shooting queries in 2-D Constructive Solid Geometry (CSG) models of size N . Goodrich et al. [59], Zhu [131], Arge et al. [18], Arge et al. [14], and Crauser et al. [44, 45] develop EM algorithms for those problems using these EM paradigms for batched problems: Distribution sweeping, a generalization of the sorting distribution paradigm [124] for “externalizing” plane sweep algorithms. Persistent B-trees, an oﬄine method for constructing an optimal-space persistent version of the B-tree data structure (see Section 27.3.1), yielding a factor of B improvement over the generic persistence techniques of Driscoll et al. [49]. Batched ﬁltering, a general method for performing simultaneous EM searches in data structures that can be modeled as planar layered directed acyclic graphs; it is useful for 3-D convex hulls and batched point location. Multisearch on parallel computers is considered in [48]. External fractional cascading, an EM analogue to fractional cascading on a segment tree, in which the degree of the segment tree is O(mα ) for some constant 0 < α ≤ 1. Batched queries can be performed eﬃciently using batched ﬁltering; online queries can be supported eﬃciently by adapting the parallel algorithms of work of Tamassia and Vitter [114] to the I/O setting. External marriage-before-conquest, an EM analogue to the technique of Kirkpatrick and Seidel [76] for performing output-sensitive convex hull constructions. Batched incremental construction, a localized version of the randomized incremental construction paradigm of Clarkson and Shor [42], in which the updates to a simple dynamic data structure are done in a random order, with the goal of fast overall performance on the average. The data structure itself may have bad worst-case performance, but the randomization of the update order makes worstcase behavior unlikely. The key for the EM version so as to gain the factor of B I/O speedup is to batch together the incremental modiﬁcations. For illustrative purposes, we focus in the remainder of this section primarily on the distribution sweep paradigm [59], which is a combination of the distribution paradigm for sorting [124] and the well-known sweeping paradigm from computational geometry [47, 98]. As an example, let us consider how to achieve optimality Criteria B1 and B2 for computing the pairwise intersections of N orthogonal segments in the plane, making use of the following recursive distribution sweep: At each level of recursion, the region under consideration is

© 2005 by Chapman & Hall/CRC

27-6

Handbook of Data Structures and Applications

s3

s9 s5

s7

s2

s1

s6 s4

Sweep Line

s8

horizontal segment being processed

Slab 1

Slab 2

Slab 3

Slab 4

Slab 5

FIGURE 27.2: Distribution sweep used for ﬁnding intersections among N orthogonal segments. The vertical segments currently stored in the slabs are indicated in bold (namely s1 , s2 , . . . , s9 ). Segments s5 and s9 are not active, but have not yet been deleted from the slabs. The sweep line has just advanced to a new horizontal segment that completely spans slabs 2 and 3, so slabs 2 and 3 are scanned and all the active vertical segments in slabs 2 and 3 (namely s2 , s3 , s4 , s6 , s7 ) are reported as intersecting the horizontal segment. In the process of scanning slab 3, segment s5 is discovered to be no longer active and can be deleted from slab 3. The end portions of the horizontal segment that “stick out” into slabs 1 and 4 are handled by the lower levels of recursion, where the intersection with s8 is eventually discovered. partitioned into Θ(m) vertical slabs, each containing Θ(N/m) of the segments’ endpoints. We sweep a horizontal line from top to bottom to process the N segments. When the sweep line encounters a vertical segment, we insert the segment into the appropriate slab. When the sweep line encounters a horizontal segment h, as pictured in Figure 27.2, we report h’s intersections with all the “active” vertical segments in the slabs that are spanned completely by h. (A vertical segment is “active” if it intersects the current sweep line; vertical segments that are found to be no longer active are deleted from the slabs.) The remaining two end portions of h (which “stick out” past a slab boundary) are passed recursively to the next level, along with the vertical segments. The downward sweep then proceeds. After the initial sorting (to get the segments with respect to the y-dimension), the sweep at each of the O(logm n) levels of recursion requires O(n) I/Os, yielding the desired bound in B1 of O (n + q) logm n + z . Some timing experiments on distribution sweeping appear in [39]. Arge et al. [14] develop a uniﬁed approach to distribution sweep in higher dimensions. A central operation in spatial databases is spatial join. A common preprocessing step is to ﬁnd the pairwise intersections of the bounding boxes of the objects involved in the spatial join. The problem of intersecting orthogonal rectangles can be solved by combining the previous sweep line algorithm for orthogonal segments with one for range searching. Arge et al. [14] take a more uniﬁed approach using distribution sweep, which is extendible to higher dimensions: The active objects that are stored in the data structure in this case √ are rectangles, not vertical segments. The authors choose the branching factor to be Θ( m ).

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-7

Each rectangle is associated with the largest contiguous range of vertical slabs that it spans. √ Each of the possible Θ 2m = Θ(m) contiguous ranges of slabs √ is called a multislab. The reason why the authors choose the branching factor to be Θ( m ) rather than Θ(m) is so that the number of multislabs is Θ(m), and thus there is room in internal memory for a buﬀer for each multislab. The height of the tree remains O(logm n). The algorithm proceeds by sweeping a horizontal line from top to bottom to process the N rectangles. When the sweep line ﬁrst encounters a rectangle R, we consider the multislab lists for all the multislabs that R intersects. We report all the active rectangles in those multislab lists, since they are guaranteed to intersect R. (Rectangles no longer active are discarded from the lists.) We then extract the left and right end portions of R that partially “stick out” past slab boundaries, and we pass them down to process in the next lower level of recursion. We insert the remaining portion of R, which spans complete slabs, into the list for the appropriate multislab. The downward sweep then continues. After the initial sorting preprocessing, each of the O(log m n) sweeps (one per level of recursion) takes O(n) I/Os, yielding the desired bound O (n + q) logm n + z . The resulting algorithm, called Scalable Sweeping-Based Spatial Join (SSSJ) [13, 14], outperforms other techniques for rectangle intersection. It was tested against two other sweep line algorithms: the Partition-Based Spatial-Merge (QPBSM) used in Paradise [97] and a faster version called MPBSM that uses an improved dynamic data structure for intervals [13]. The TPIE (Transparent Parallel I/O Environment) system [11, 117, 122] served as the common implementation platform. The algorithms were tested on several data sets. The timing results for the two data sets in Figures 27.3(a) and 27.3(b) are given in Figures 27.3(c) and 27.3(d), respectively. The ﬁrst data set is the worst case for sweep line algorithms; a large fraction of the line segments in the ﬁle are active (i.e., they intersect the current sweep line). The second data set is a best case for sweep line algorithms, but the two PBSM algorithms have the disadvantage of making extra copies of the rectangles. In both cases, SSSJ shows considerable improvement over the PBSM-based methods. In other experiments done on more typical data, such as TIGER/line road data sets [116], SSSJ and MPBSM perform about 30% faster than does QPBSM. The conclusion we draw is that SSSJ is as fast as other known methods on typical data, but unlike other methods, it scales well even for worst-case data. If the rectangles are already stored in an index structure, such as the R-tree index structure we consider in Section 27.4.2, hybrid methods that combine distribution sweep with inorder traversal often perform best [12]. For the problem of ﬁnding all intersections among N line segments, Arge et al. [18] give an eﬃcient algorithm based upon distribution sort, but the output component of the I/O bound is slightly nonoptimal: z logm n rather than z. Crauser et al. [44, 45] attain the optimal I/O bound of criterion B1, namely O (n + q) logm n + z , by constructing the trapezoidal decomposition for the intersecting segments using an incremental randomized construction. For I/O eﬃciency, they do the incremental updates in a series of batches, in which the batch size is geometrically increasing by a factor of m. Online issues also arise in the analysis of batched EM algorithms: In practice, batched algorithms must adapt in a robust and online way when the memory allocation changes, and online techniques can play an important role. Some initial work has been done on memory-adaptive EM algorithms in a competitive framework [23].

© 2005 by Chapman & Hall/CRC

27-8

Handbook of Data Structures and Applications

(a)

(b) 0

0 7000 "QPBSM" "MPBSM" "SSSJ"

6000

Time (seconds)

5000

4000

3000

2000

1000

(c)

0 0

100000

200000

300000

400000 500000 600000 Number of rectangles

700000

800000

900000

1e+06

1000 "MPBSM" "QPBSM" "SSSJ"

Time (seconds)

800

600

400

200

(d) 0 0

200000

400000 600000 Number of rectangles

800000

1e+06

FIGURE 27.3: Comparison of Scalable Sweeping-Based Spatial Join (SSSJ) with the original PBSM (QPBSM) and a new variant (MPBSM). In this variant of the problem, each data set contains N/2 red rectangles (designated by solid sides) and N/2 blue rectangles (designated by dashed sides), and the goal is to ﬁnd all intersections between red rectangles and blue rectangles. In each data set shown, the number of intersections is O(N ): (a) Data set 1 consists of tall, skinny (vertically aligned) rectangles; (b) Data set 2 consists of short, wide (horizontally aligned) rectangles; (c) Running times on data set 1; (d) Running times on data set 2.

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27.3

27-9

External Memory Tree Data Structures

In this section we consider the basic online EM data structures for storing and querying spatial data in one dimension. The dictionary problem is an important special case, which can be solved eﬃciently in the average case by use of hashing. However, hashing does not support sequential search in a natural way, such as retrieving all the items with key value in a speciﬁed range. Some clever work has been done on order-preserving hash functions, in which items with sequential keys are stored in the same block or in adjacent blocks, but the search performance is less robust and tends to deteriorate because of unwanted collisions. (See [56, 124] for a survey.) A more eﬀective EM approach for geometric queries is to use multiway trees, which we explore in this section. For illustration, we use orthogonal range search as our canonical problem. It is a fundamental database primitive in spatial databases and geographic information systems (GIS), and it includes dictionary lookup as a special case. A range query, for a given d-dimensional rectangle, returns all the points in the interior of the rectangle. Other types of spatial queries include point location queries, ray shooting queries, nearest neighbor queries, and intersection queries, but for brevity we restrict our attention primarily to range searching. Spatial data structures tend to be of two types: space-driven or data-driven. Quad trees and grid ﬁles are space-driven since they are based upon a partitioning of the embedding space, somewhat akin to using order-preserving hash functions, whereas methods like Rtrees and kd-trees are organized by partitioning the data items themselves. We shall discuss primarily the latter type in this chapter.

27.3.1

B-trees and Variants

Tree-based data structures arise naturally in the online setting, in which the data can be updated and queries must be processed immediately. Binary trees have a host of applications in the (internal memory) RAM model. In order to exploit block transfer, trees in external memory generally use a block for each node, which can store Θ(B) pointers and data values. The well-known balanced multiway B-tree due to Bayer and McCreight [25, 43, 77] is the most widely used nontrivial EM data structure. The degree of each node in the B-tree (with the exception of the root) is required to be Θ(B), which guarantees that the height of a B-tree storing N items is roughly logB N . B-trees support dynamic dictionary operations and one-dimensional range search optimally in linear space, O(logB N ) I/Os per insert or delete, and O(logB N + z) I/Os per query, where Z = zB is the number of items output. When a node overﬂows during an insertion, it splits into two half-full nodes, and if the splitting causes the parent node to overﬂow, the parent node splits, and so on. Splittings can thus propagate up to the root, which is how the tree grows in height. Deletions are handled in a symmetric way by merging nodes. In the B+ -tree variant, pictured in Figure 27.4, all the items are stored in the leaves, and the leaves are linked together in symmetric order to facilitate range queries and sequential access. The internal nodes store only key values and pointers and thus can have a higher branching factor. In the most popular variant of B+ -trees, called B*-trees, splitting can usually be postponed when a node overﬂows by “sharing” the node’s data with one of its adjacent siblings. The node needs to be split only if the sibling is also full; when that happens, the node splits into two, and its data and those of its full sibling are evenly redistributed, making each of the three nodes about two-thirds full. This local optimization reduces the number of times new nodes must be created and thus increases the storage utilization. And since there are fewer nodes in the tree, search I/O costs are lower. When

© 2005 by Chapman & Hall/CRC

27-10

Handbook of Data Structures and Applications

no sharing is done (as in B+ -trees), Yao [129] shows that nodes are roughly ln 2 ≈ 69% full on the average, assuming random insertions. With sharing (as in B*-trees), the average storage utilization increases to about 2 ln(3/2) ≈ 81% [20, 81]. Storage utilization can be increased further by sharing among several siblings, at the cost of more complicated insertions and deletions. Some helpful space-saving techniques borrowed from hashing are partial expansions [21] and use of overﬂow nodes [112]. A cross between B-trees and hashing, where each subtree rooted at a certain level of the B-tree is instead organized as an external hash table, was developed by Litwin and Lomet [84] and further studied in [19, 85]. O’Neil [93] proposed a B-tree variant called the SB-tree that clusters together on the disk symmetrically ordered nodes from the same level so as to optimize range queries and sequential access. Rao and Ross [100, 101] use similar ideas to exploit locality and optimize search tree performance in internal memory. Reducing the number of pointers allows a higher branching factor and thus faster search. Partially persistent versions of B-trees have been developed by Becker et al. [26] and Varman and Verma [120]. By persistent data structure, we mean that searches can be done with respect to any timestamp y [49, 50]. In a partially persistent data structure, only the most recent version of the data structure can be updated. In a fully persistent data structure, any update done with timestamp y aﬀects all future queries for any time after y. An interesting open problem is whether B-trees can be made fully persistent. Salzberg and Tsotras [105] survey work done on persistent access methods and other techniques for time-evolving data. Lehman and Yao [83], Mohan [89], and Lomet and Salzberg [87] explore mechanisms to add concurrency and recovery to B-trees. Other variants are discussed in Chapter 15.

27.3.2

Weight-Balanced B-trees

Arge and Vitter [17] introduce a powerful variant of B-trees called weight-balanced B-trees, with the property that the weight of any subtree at level h (i.e., the number of nodes in the subtree rooted at a node of height h) is Θ(ah ), for some ﬁxed parameter a of order B. By contrast, the sizes of subtrees at level h in a regular B-tree can diﬀer by a multiplicative factor that is exponential in h. When a node on level h of a weight-balanced B-tree gets rebalanced, no further rebalancing is needed until its subtree is updated Ω(ah ) times. Weight-balanced B-trees support a wide array of applications in which the I/O cost to rebalance a node of weight w is O(w); the rebalancings can be scheduled in an amortized (and often worst-case) way with only O(1) I/Os. Such applications are very common when the

Level 2 Level 1 Leaves FIGURE 27.4: B+ -tree multiway search tree. Each internal and leaf node corresponds to a disk block. All the items are stored in the leaves; the darker portion of each leaf block indicates its relative fullness. The internal nodes store only key values and pointers, Θ(B) of them per node. Although not indicated here, the leaf blocks are linked sequentially.

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-11

nodes have secondary structures, as in multidimensional search trees, or when rebuilding is expensive. Agarwal et al. [6] apply weight-balanced B-trees to convert partition trees such as kd-trees, BBD trees, and BAR trees, which were designed for internal memory, into eﬃcient EM data structures. Weight-balanced trees called BB[α]-trees [31, 91] have been designed for internal memory; they maintain balance via rotations, which is appropriate for binary trees, but not for the multiway trees needed for external memory. In contrast, weight-balanced B-trees maintain balance via splits and merges. Weight-balanced B-trees were originally conceived as part of an optimal dynamic EM interval tree structure for stabbing queries and a related EM segment tree structure. We discuss their use for stabbing queries and other types of range queries in Sections 27.4.3– 27.4.5. They also have applications in the (internal memory) RAM model [17, 63], where they oﬀer a simpler alternative to BB[α]-trees. For example, by setting a to a constant in the EM interval tree based upon weight-balanced B-trees, we get a simple worst-case implementation of interval trees [51, 52] in internal memory. Weight-balanced B-trees are also preferable to BB[α]-trees for purposes of augmenting one-dimensional data structures with range restriction capabilities [127].

27.3.3

Parent Pointers and Level-Balanced B-trees

It is sometimes useful to augment B-trees with parent pointers. For example, if we represent a total order via the leaves in a B-tree, we can answer order queries such as “Is x < y in the total order?” by walking upwards in the B-tree from the leaves for x and y until we reach their common ancestor. Order queries arise in online algorithms for planar point location and for determining reachability in monotone subdivisions [2]. If we augment a conventional B-tree with parent pointers, then each split operation costs Θ(B) I/Os to update parent pointers, although the I/O cost is only O(1) when amortized over the updates to the node. However, this amortized bound does not apply if the B-tree needs to support cut and concatenate operations, in which case the B-tree is cut into contiguous pieces and the pieces are rearranged arbitrarily. For example, reachability queries in a monotone subdivision are processed by maintaining two total orders, called the leftist and rightist orders, each of which is represented by a B-tree. When an edge is inserted or deleted, the tree representing each order is cut into four consecutive pieces, and the four pieces are rearranged via concatenate operations into a new total order. Doing cuts and concatenation via conventional B-trees augmented with parent pointers will require Θ(B) I/Os per level in the worst case. Node splits can occur with each operation (unlike the case where there are only inserts and deletes), and thus there is no convenient amortization argument that can be applied. Agarwal et al. [2] describe an interesting variant of B-trees called level-balanced B-trees for handling parent pointers and operations such as cut and concatenate. The balancing condition is “global”: The data structure represents a forest of B-trees in which the number of nodes on level h in the forest is allowed to be at most Nh = 2N/(b/3)h, where b is some ﬁxed parameter in the range 4 < b < B/2. It immediately follows that the total height of the forest is roughly logb N . Unlike previous variants of B-trees, the degrees of individual nodes of level-balanced Btrees can be arbitrarily small, and for storage purposes, nodes are packed together into disk blocks. Each node in the forest is stored as a node record (which points to the parent’s node record) and a doubly linked list of child records (which point to the node records of the children). There are also pointers between the node record and the list of child records. Every disk block stores only node records or only child records, but all the child records

© 2005 by Chapman & Hall/CRC

27-12

Handbook of Data Structures and Applications

for a given node must be stored in the same block (possibly with child records for other nodes). The advantage of this extra level of indirection is that cuts and concatenates can usually be done in only O(1) I/Os per level of the forest. For example, during a cut, a node record gets split into two, and its list of child nodes is chopped into two separate lists. The parent node must therefore get a new child record to point to the new node. These updates require O(1) I/Os except when there is not enough space in the disk block of the parent’s child records, in which case the block must be split into two, and extra I/Os are needed to update the pointers to the moved child records. The amortized I/O cost, however, is only O(1) per level, since each update creates at most one node record and child record at each level. The other dynamic update operations can be handled similarly. All that remains is to reestablish the global level invariant when a level gets too many nodes as a result of an update. If level h is the lowest such level out of balance, then level h and all the levels above it are reconstructed via a postorder traversal in O(Nh ) I/Os so that the new nodes get degree Θ(b) and the invariant is restored. The ﬁnal trick is to construct the new parent pointers that point from the Θ(Nh−1 ) = Θ(bNh ) node records on level h − 1 to the Θ(Nh ) level-h nodes. The parent pointers can be accessed in a blocked manner with respect to the new ordering of the nodes on level h. By sorting, the pointers can be rearranged to correspond to the ordering of the nodes on level h − 1, after which can be written via a linear scan. The resulting I/O the parent pointer values cost is O (bNh /B) logm (bNh /B) , which can be amortized against the Θ(Nh ) updates that occurred since the last timethe level-h invariant was violated, yielding an amortized update cost of O 1 + (b/B) logm n I/Os per level. Order queries such as “Does leaf x precede leaf y in the total order represented by the tree?” can be answered using O(logB N ) I/Os by following parent pointers starting atx and y. The update operations insert, delete, cut, and concatenate can be done in O 1 +(b/B) logmn logb N I/Os amortized, for any 2 ≤ b ≤ B/2, which is never worse than O (logB N )2 by appropriate choice of b. Using the multislab decomposition we discuss in Section 27.4.3, Agarwal et al. [2] apply level-balanced B-trees in a data structure for point location in monotone subdivisions, 2 which supports queries and (amortized) updates in O (logB N ) I/Os. They also use it to dynamically maintain planar st-graphs using O (1 + (b/B)(logm n) logb N I/Os (amortized) per update, so that reachability queries can be answered in O(logB N ) I/Os (worstcase). (Planar st-graphs are planar directed acyclic graphs with a single source and a single sink.) An interesting open question is whether level-balanced B-trees can be implemented in O(logB N ) I/Os per update. Such an improvement would immediately give an optimal dynamic structure for reachability queries in planar st-graphs.

27.3.4

Buﬀer Trees

An important paradigm for constructing algorithms for batched problems in an internal memory setting is to use a dynamic data structure to process a sequence of updates. For example, we can sort N items by inserting them one by one into a priority queue, followed by a sequence of N delete min operations. Similarly, many batched problems in computational geometry can be solved by dynamic plane sweep techniques. For example, in Section 27.2 we showed how to compute orthogonal segment intersections by dynamically keeping track of the active vertical segments (i.e., those hit by the horizontal sweep line); we mentioned a similar algorithm for orthogonal rectangle intersections. However, if we use this paradigm naively in an EM setting, with a B-tree as the dynamic data structure, the resulting I/O performance will be highly nonoptimal. For example, if we use a B-tree as the priority queue in sorting or to store the active vertical segments hit

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-13

by the sweep line, each update and query operation will take O(logB N ) I/Os, resulting in a total of O(N logB N ) I/Os, which is larger than the optimal bound O(n logm n) by a substantial factor of roughly B. One solution suggested in [123] is to use a binary tree data structure in which items are pushed lazily down the tree in blocks of B items at a time. The binary nature of the tree results in a data structure of height O(log n), yielding a total I/O bound of O(n log n), which is still nonoptimal by a signiﬁcant log m factor. Arge [10] developed the elegant buﬀer tree data structure to support batched dynamic operations, as in the sweep line example, where the queries do not have to be answered right away or in any particular order. The buﬀer tree is a balanced multiway tree, but with degree Θ(m) rather than degree Θ(B), except possibly for the root. Its key distinguishing feature is that each node has a buﬀer that can store Θ(M ) items (i.e., Θ(m) blocks of items). Items in a node are pushed down to the children when the buﬀer ﬁlls. Emptying a full buﬀer requires Θ(m) I/Os, which amortizes the cost of distributing the M items to the Θ(m) children. Each item thus incurs an amortized cost of O(m/M ) = O(1/B) I/Os per level, and the resulting cost for queries and updates is O (1/B) logm n I/Os amortized. Buﬀer trees have an ever-expanding list of applications. They can be used as a subroutine in the standard sweep line algorithm in order to get an optimal EM algorithm for orthogonal segment intersection. Arge showed how to extend buﬀer trees to implement segment trees √ [28] in external memory in a batched dynamic setting by reducing the node degrees to Θ( m ) and by introducing multislabs in each node, which were explained in Section 27.2 for the related batched problem of intersecting rectangles. Buﬀer trees provide a natural amortized implementation of priority queues for time-forward processing applications such as discrete event simulation, sweeping, and list ranking [41]. Govindrajan et al. [60] use time-forward processing to construct a well-separated pair decomposition of N points in d dimensions in O n logm n I/Os, and they apply it to the problems of ﬁnding the K nearest neighbors for each point and the K closest pairs. Brodal and Katajainen [33] provide a worst-case optimal priority queue, in the sense that every sequence of B insert and delete min operations requires only O(logm n) I/Os. Practical implementations of priority queues based upon these ideas are examined in [32, 109]. In Section 27.4.2 we report on some timing experiments involving buﬀer trees for use in bulk loading of R-trees. Further experiments on buﬀer trees appear in [68].

27.4

Spatial Data Structures and Range Search

In this section we consider online EM data structures for storing and querying spatial data. A fundamental database primitive in spatial databases and geographic information systems (GIS) is range search, which includes dictionary lookup as a special case. An orthogonal range query, for a given d-dimensional rectangle, returns all the points in the interior of the rectangle. In this section we use range searching (especially for the orthogonal 2-D case when d = 2) as the canonical query operation on spatial data. Other types of spatial queries include point location, ray shooting, nearest neighbor, and intersection queries, but for brevity we restrict our attention primarily to range searching. There are two types of spatial data structures: data-driven and space-driven. R-trees and kd-trees are data-driven since they are based upon a partitioning of the data items themselves, whereas space-driven methods such as quad trees and grid ﬁles are organized by a partitioning of the embedding space, akin to order-preserving hash functions. In this section we discuss primarily data-driven data structures. Multidimensional range search is a fundamental primitive in several online geometric applications, and it provides indexing support for constraint and object-oriented data models.

© 2005 by Chapman & Hall/CRC

27-14

Handbook of Data Structures and Applications

(See [74] for background.) We have already discussed multidimensional range searching in a batched setting in Section 27.2. In this section we concentrate on data structures for the online case. For many types of range searching problems, it is very diﬃcult to develop theoretically optimal algorithms and data structures. Many open problems remain. The goal for online data structures is typically to achieve the three optimality Criteria O1–O3 of Section 27.1.2. We explain in Section 27.4.6 that under a fairly general computational model for general 2-D orthogonal queries, as pictured in Figure 27.5(d), it is impossible to satisfy Criteria O1 and O2 simultaneously. At least Ω n(log n)/ log(log N + 1) blocks of disk space must be B used to achieve a query bound of O (logB N )c + z I/Os per query, for any constant c [113]. Three natural questions arise: • What sort of performance can be achieved when using only a linear amount of disk space? In Sections 27.4.1 and 27.4.2, we discuss some of the linear-space data structures used extensively in practice. None of them come close to satisfying Criteria O1 and O3 for range search in the worst case, but in typical-case scenarios they often perform well. We devote Section 27.4.2 to R-trees and their variants, which are the most popular general-purpose spatial structures developed to date. • Since the lower bound applies only to general 2-D rectangular queries, are there any data structures that meet Criteria O1–O3 for the important special cases of 2-D range searching pictured in Figures 27.5(a), 27.5(b), and 27.5(c)? Fortunately the answer is yes. We show in Sections 27.4.3 and 27.4.4 how to use a “bootstrapping” paradigm to achieve optimal search and update performance. • Can we meet Criteria O1 and O2 for general four-sided rangesearching if the disk space allowance is increased to O n(log n)/ log(logB N + 1) blocks? Yes again! In Section 27.4.5 we show how to adapt the optimal structure for three-sided searching in order to handle general four-sided searching in optimal search cost. The update cost, however, is not known to be optimal. In Section 27.5 we discuss other scenarios of range search dealing with three dimensions and nonorthogonal queries. We discuss the lower bounds for 2-D range searching in Section 27.4.6.

27.4.1

Linear-Space Spatial Structures

Grossi and Italiano [62] construct an elegant multidimensional version of the B-tree called the cross tree. Using linear space, it combines the data-driven partitioning of weightbalanced B-trees (cf. Section 27.3.2) at the upper levels of the tree with the space-driven partitioning of methods such as quad trees at the lower levels of the tree. For d > 1, d-

00 11 1111 00 00 11 00 00 11 0011 0011 11 00 00 11 00 11 0011 11 00 00 11 00 11 00 11 00 11 00 11 00 11

x

x

(a)

00 11 00 1111 00 00 11 11 00 11 00 00 11 0011 0011 11 00 11 00 11 00 00 11 00 11 0011 11 00 00 00 11 11 00 11 00 11 00 11 00 11 00 00 11 00 11 0011 11 00 11 00 11 00 11 00 11 00 11 00 11 00 11 11 0011 00

y1

x2

(b)

00 11 00 1111 00 00 11 11 00 11 00 00 11 0011 0011 11 00 11 00 11 00 00 11 00 11 0011 11 00 00 00 11 11 00 11 00 11 00 11 00 11 00 00 11 00 11 0011 11 00 11 00 11 00 11 00 11 00 11 00 11 00 11 11 0011 00

y1

x1

x2

(c)

00 11 00 1111 00 00 11 11 00 11 00 00 11 0011 0011 11 00 11 00 11 00 00 11 00 11 0011 11 00 00 00 11 11 00 11 00 11 00 11 00 11 00 00 11 00 11 0011 11 00 11 00 11 00 11 00 11 00 11 00 11 00 11 11 0011 00

y2

y1

x1

x2

(d)

FIGURE 27.5: Diﬀerent types of 2-D orthogonal range queries: (a) Diagonal corner twosided 2-D query (equivalent to a stabbing query, cf. Section 27.4.3), (b) two-sided 2-D query, (c) three-sided 2-D query, and (d) general four-sided 2-D query.

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-15

dimensional orthogonal range queries can be done in O(n1−1/d + z) I/Os, and inserts and deletes take O(logB N ) I/Os. The O-tree of Kanth and Singh [75] provides similar bounds. Cross trees also support the dynamic operations of cut and concatenate in O(n1−1/d ) I/Os. In some restricted models for linear-space data structures, the 2-D range search query performance of cross trees and O-trees can be considered to be optimal, although it is much larger than the logarithmic bound of Criterion O1. One way to get multidimensional EM data structures is to augment known internal memory structures, such as quad trees and kd-trees, with block-access capabilities. Examples include kd-B-trees [102], buddy trees [110], and hB-trees [54, 86]. Grid ﬁles [67, 80, 90] are a ﬂattened data structure for storing the cells of a two-dimensional grid in disk blocks. Another technique is to “linearize” the multidimensional space by imposing a total ordering on it (a so-called space-ﬁlling curve), and then the total order is used to organize the points into a B-tree [57, 71, 95]. Linearization can also be used to represent nonpoint data, in which the data items are partitioned into one or more multidimensional rectangular regions [1, 94]. All the methods described in this paragraph use linear space, and they work well in certain situations; however, their worst-case range query performance is no better than that of cross trees, and for some methods, such as grid ﬁles, queries can require Θ(n) I/Os, even if there are no points satisfying the query. We refer the reader to [8, 56, 92] for a broad survey of these and other interesting methods. Space-ﬁlling curves arise again in connection with R-trees, which we describe next.

27.4.2

R-trees

The R-tree of Guttman [64] and its many variants are a practical multidimensional generalization of the B-tree for storing a variety of geometric objects, such as points, segments, polygons, and polyhedra, using linear disk space. Internal nodes have degree Θ(B) (except possibly the root), and leaves store Θ(B) items. Each node in the tree has associated with it a bounding box (or bounding polygon) of all the items in its subtree. A big diﬀerence between R-trees and B-trees is that in R-trees the bounding boxes of sibling nodes are allowed to overlap. If an R-tree is being used for point location, for example, a point may lie within the bounding box of several children of the current node in the search. In that case the search must proceed to all such children. In the dynamic setting, there are several popular heuristics for where to insert new items into an R-tree and how to rebalance it; see Chapter 21 and [8, 56, 61] for a survey. The R* tree variant of Beckmann et al. [27] seems to give best overall query performance. To insert an item, we start at the root and recursively insert the item into the subtree whose bounding box would expand the least in order to accommodate the item. In case of a tie (e.g., if the item already ﬁts inside the bounding boxes of two or more subtrees), we choose the subtree with the smallest resulting bounding box. In the normal R-tree algorithm, if a leaf node gets too many items or if an internal node gets too many children, we split it, as in B-trees. Instead, in the R*-tree algorithm, we remove a certain percentage of the items from the overﬂowing node and reinsert them into the tree. The items we choose to reinsert are the ones whose centroids are furthest from the center of the node’s bounding box. This forced reinsertion tends to improve global organization and reduce query time. If the node still overﬂows after the forced reinsertion, we split it. The splitting heuristics try to partition the items into nodes so as to minimize intuitive measures such as coverage, overlap, or perimeter. During deletion, in both the normal R-tree and R*-tree algorithms, if a leaf node has too few items or if an internal node has too few children, we delete the node and reinsert all its items back into the tree by forced reinsertion. The rebalancing heuristics perform well in many practical scenarios, especially in low

© 2005 by Chapman & Hall/CRC

27-16

Handbook of Data Structures and Applications Data Set RI CT NJ NY

Update Method naive Hilbert buﬀer naive Hilbert buﬀer naive Hilbert buﬀer naive Hilbert buﬀer

Update with 50% of the data Building Querying Packing 259, 263 6, 670 64% 15, 865 7, 262 92% 13, 484 5, 485 90% 805, 749 40, 910 66% 51, 086 40, 593 92% 42, 774 37, 798 90% 66% 1, 777, 570 70, 830 92% 120, 034 69, 798 101, 017 65, 898 91% 3, 736, 601 224, 039 66% 246, 466 230, 990 92% 206, 921 227, 559 90%

TABLE 27.1 Summary of the costs (in number of I/Os) for R-tree updates and queries. Packing refers to the percentage storage utilization.

dimensions, but they result in poor worst-case query bounds. An interesting open problem is whether nontrivial query bounds can be proven for the “typical-case” behavior of R-trees for problems such as range searching and point location. Similar questions apply to the methods discussed in Section 27.4.1. New R-tree partitioning methods by de Berg et al. [46] and Agarwal et al. [7] provide some provable bounds on overlap and query performance. In the static setting, in which there are no updates, constructing the R*-tree by repeated insertions, one by one, is extremely slow. A faster alternative to the dynamic R-tree construction algorithms mentioned above is to bulk-load the R-tree in a bottom-up fashion [1, 70, 94]. Such methods use some heuristic for grouping the items into leaf nodes of the R-tree, and then recursively build the nonleaf nodes from bottom to top. As an example, in the so-called Hilbert R-tree of Kamel and Faloutsos [70], each item is labeled with the position of its centroid on the Peano-Hilbert space-ﬁlling curve, and a B+ -tree is built upon the totally ordered labels in a bottom-up manner. Bulk loading a Hilbert R-tree is therefore easy to do once the centroid points are presorted. These static construction methods algorithms are very diﬀerent in spirit from the dynamic insertion methods: The dynamic methods explicitly try to reduce the coverage, overlap, or perimeter of the bounding boxes of the R-tree nodes, and as a result, they usually achieve good query performance. The static construction methods do not consider the bounding box information at all. Instead, the hope is that the improved storage utilization (up to 100%) of these packing methods compensates for a higher degree of node overlap. A dynamic insertion method related to [70] was presented in [71]. The quality of the Hilbert R-tree in terms of query performance is generally not as good as that of an R*-tree, especially for higher-dimensional data [30, 72]. In order to get the best of both worlds—the query performance of R*-trees and the bulk construction eﬃciency of Hilbert R-trees—Arge et al. [11] and van den Bercken et al. [118] independently devised fast bulk loading methods based upon buﬀer trees that do top-down construction in O(n logm n) I/Os, which matches the performance of the bottom-up methods within a constant factor. The former method is especially eﬃcient and supports dynamic batched updates and queries. In Figure 27.6 and Table 27.1, we report on some experiments that test the construction, update, and query performance of various R-tree methods. The experimental data came from TIGER/line data sets from four U.S. states [116]; the implementations were done using the TPIE system. Figure 27.6 compares the construction cost for building R-trees and the resulting query performance in terms of I/Os for the naive sequential method for construction into R*-trees (labeled “naive”) and the newly developed buﬀer R*-tree method [11] (labeled “buﬀer”). An R-tree was constructed on the TIGER road data for each state and for each of four possible buﬀer sizes. The four buﬀer sizes were capable of storing 0, 600, 1,250, and 5,000 rectangles,

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory (naive)

buﬀer size: 600

buﬀer size: 1,250

7000 6000 5000 4000 3000 2000 1000 0

RI

27-17

CT

buﬀer size: 5,000

NJ

NY

NJ

NY

(a) 250 200 150 100 50 0

RI

CT (b)

FIGURE 27.6: Costs for R-tree processing (in units of 1000 I/Os) using the naive repeated insertion method and the buﬀer R-tree for various buﬀer sizes: (a) cost for bulk-loading the R-tree, (b) query cost. respectively; buﬀer size 0 corresponds to the naive method, and the larger buﬀers correspond to the buﬀer method. The query performance of each resulting R-tree was measured by posing rectangle intersection queries using rectangles taken from TIGER hydrographic data. The results, depicted in Figure 27.6, show that buﬀer R*-trees, even with relatively small buﬀers, achieve a tremendous speedup in number of I/Os for construction without any worsening in query performance, compared with the naive method. The CPU costs of the two methods are comparable. The storage utilization of buﬀer R*-trees tends to be in the 90% range, as opposed to roughly 70% for the naive method. Bottom-up methods can build R-trees even more quickly and more compactly, but they generally do not support bulk dynamic operations, which is a big advantage of the buﬀer tree approach. Kamel et al. [72] develop a way to do bulk updates with Hilbert R-trees, but at a cost in terms of query performance. Table 27.1 compares dynamic update methods for the naive method, for buﬀer R-trees, and for Hilbert R-trees [72] (labeled “Hilbert”). A single R-tree was built for each of the four U.S. states, containing 50% of the road data objects for that state. Using each of the three algorithms, the remaining 50% of the objects were inserted into the R-tree, and the construction time was measured. Query performance was then tested as before. The results in Table 27.1 indicate that the buﬀer R*-tree and the

© 2005 by Chapman & Hall/CRC

27-18

Handbook of Data Structures and Applications

Hilbert R-tree achieve a similar degree of packing, but the buﬀer R*-tree provides better update and query performance.

27.4.3

Bootstrapping for 2-D Diagonal Corner and Stabbing Queries

An obvious paradigm for developing an eﬃcient dynamic EM data structure, given an existing data structure that works well when the problem ﬁts into internal memory, is to “externalize” the internal memory data structure. If the internal memory data structure uses a binary tree, then a multiway tree such as a B-tree must be used instead. However, when searching a B-tree, it can be diﬃcult to report the outputs in an output-sensitive manner. For example, in certain searching applications, each of the Θ(B) subtrees of a given node in a B-tree may contribute one item to the query output, and as a result each subtree may need to be explored (costing several I/Os) just to report a single output item. Fortunately, we can sometimes achieve output-sensitive reporting by augmenting the data structure with a set of ﬁltering substructures, each of which is a data structure for a smaller version of the same problem. We refer to this approach, which we explain shortly in more detail, as the bootstrapping paradigm. Each substructure typically needs to store only O(B 2 ) items and to answer queries in O(logB B 2 + Z /B) = O Z /B I/Os, where Z is the number of items reported. A substructure can even be static if it can be constructed in O(B) I/Os, since we can keep updates in a separate buﬀer and do a global rebuilding in O(B) I/Os whenever there are Θ(B) updates. Such a rebuilding costs O(1) I/Os (amortized) per update. We can often remove the amortization and make it worst-case using the weightbalanced B-trees of Section 27.3.2 as the underlying B-tree structure. Arge and Vitter [17] ﬁrst uncovered the bootstrapping paradigm while designing an optimal dynamic EM data structure for diagonal corner two-sided 2-D queries (see Figure 27.5(a)) that meets all three design criteria for online data structures listed in Section 27.1.2. Diagonal corner two-sided queries are equivalent to stabbing queries, which have the following form: “Given a set of one-dimensional intervals, report all the intervals ‘stabbed’ by the query value x.” (That is, report all intervals that contain x.) A diagonal corner query x on a set of 2-D points {(a1 , b2 ), (a2 , b2 ), . . . } is equivalent to a stabbing query x on the set of closed intervals {[a1 , b2 ], [a2 , b2 ], . . . }. The EM data structure for stabbing queries is a multiway version of the well-known interval tree data structure [51, 52] for internal memory, which supports stabbing queries in O(log N + Z) CPU time and updates in O(log N ) CPU time and uses O(N ) space. We can externalize it by using √ a weight-balanced B-tree as the underlying base tree, where the nodes have degree Θ( B ). Each node in √ the base tree corresponds in a natural way to a one-dimensional √ 2 range of x-values; its Θ( B ) children correspond to subranges called slabs, and the Θ( B ) = Θ(B) contiguous sets of slabs are called multislabs, as in Section 27.2 for a similar batched problem. Each input interval is stored in the lowest node v in the base √ tree whose range completely contains the interval. The interval is decomposed by v’s Θ( B ) slabs into at most three pieces: the middle piece that completely spans one or more slabs of v, the left end piece that partially protrudes into a slab of v, and the right end piece that partially protrudes into another slab of v, as shown in Figure 27.7. The three pieces are stored in substructures of v. In the example in Figure 27.7, the middle piece is stored in a list associated with the multislab it spans (corresponding to the contiguous range of slabs 3–5), the left end piece is stored in a one-dimensional list for slab 2 ordered by left endpoint, and the right end piece is stored in a one-dimensional list for slab 6 ordered by right endpoint. Given a query value x, the intervals stabbed by x reside in the substructures of the nodes of the base tree along the search path from the root to the leaf for x. For each such

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory slab 1

slab 2

slab 3

slab 4

one-dimensional list of left end pieces ending in slab 2

slab 5

slab 6

27-19 slab 7

slab 8

one-dimensional list of right end pieces ending in slab 6

√ FIGURE 27.7: Internal node v of the EM priority search tree, for B = 64 with B = 8 slabs. Node v is the lowest node in the tree completely containing the indicated interval. The middle piece of the interval is stored in the multislab list corresponding to slabs 3–5. (The multislab lists are not pictured.) The left and right end pieces of the interval are stored in the left-ordered list of slab 2 and the right-ordered list of slab 6, respectively.

node v, we consider each of v’s multislabs that contains x and report all the intervals in the multislab list. We also walk sequentially through the right-ordered list and left-ordered list for the slab of v that contains x, reporting intervals in an output-sensitive way. The big problem with this approach is that we have to spend at least one I/O per multislab containing x, regardless of how many intervals are in the multislab lists. For example, there may be Θ(B) such multislab lists, with each list containing only a few stabbed intervals (or worse yet, none at all). The resulting query performance will be highly nonoptimal. The solution, according to the bootstrapping paradigm, is to use a substructure in each node consisting of an optimal static data structure for a smaller version of the same problem; a good choice is the corner data structure developed by Kanellakis et al. [74]. The corner substructure in this case is used to store all the intervals from the “sparse” multislab lists, namely those that contain fewer than B intervals, and thus the substructure contains only O(B 2 ) intervals. When visiting node v, we access only v’s nonsparse multislab lists, each of which contributes Z ≥ B intervals to the output, at an output-sensitive cost of O(Z /B) I/Os, for some Z . The remaining Z stabbed intervals stored in v can be found by a single query to v’s corner substructure, at a cost of O(logB B 2 +Z /B) = O Z /B I/Os. Since there are O(logB N ) nodes along the search path in the base tree, the total collection of Z stabbed intervals is reported in O(logB N + z) I/Os, which is optimal. Using a weightbalanced B-tree as the underlying base tree allows the static substructures to be rebuilt in worst-case optimal I/O bounds. Stabbing queries are important because, when combined with one-dimensional range queries, they provide a solution to dynamic interval management, in which one-dimensional intervals can be inserted and deleted, and intersection queries can be performed. These operations support indexing of one-dimensional constraints in constraint databases. Other applications of stabbing queries arise in graphics and GIS. For example, Chiang and Silva [40] apply the EM interval tree structure to extract at query time the boundary components of the isosurface (or contour) of a surface. A data structure for a related problem, which in addition has optimal output complexity, appears in [5]. The above bootstrapping approach also yields dynamic EM segment trees with optimal query and update bound and O(n logB N )-block space usage.

© 2005 by Chapman & Hall/CRC

27-20

Handbook of Data Structures and Applications

w1

w2

w3

(a)

w4

w5

w1

w2

w3

w4

w5

(b)

FIGURE 27.8: Internal node v of the EM priority search tree, with slabs (children) w1 , w2 , . . . , w5 . The Y-sets of each child, which are stored collectively in v’s child cache, are indicated by the bold points. (a) The three-sided query is completely contained in the x-range of w2 . The relevant (bold) points are reported from v’s child cache, and the query is recursively answered in w2 . (b) The three-sided query spans several slabs. The relevant (bold) points are reported from v’s child cache, and the query is recursively answered in w2 , w3 , and w5 . The query is not extended to w4 in this case because not all of its Y-set Y (w4 ) (stored in v’s child cache) satisﬁes the query, and as a result, none of the points stored in w4 ’s subtree can satisfy the query.

27.4.4

Bootstrapping for Three-Sided Orthogonal 2-D Range Search

Arge et al. [15] provide another example of the bootstrapping paradigm by developing an optimal dynamic EM data structure for three-sided orthogonal 2-D range searching (see Figure 27.5(c)) that meets all three design Criteria O1–O3. In internal memory, the optimal structure is the priority search tree [88], which answers three-sided range queries in O(log N + Z) CPU time, does updates in O(log N ) CPU time, and uses O(N ) space. The EM structure of Arge et al. [15] is an externalization of the priority search tree, using a weight-balanced B-tree as the underlying base tree. Each node in the base tree corresponds to a one-dimensional range of x-values, and its Θ(B) children correspond to subranges consisting of vertical slabs. Each node v contains a small substructure called a child cache that supports three-sided queries. Its child cache stores the “Y-set” Y (w) for each of the Θ(B) children w of v. The Y-set Y (w) for child w consists of the highest Θ(B) points in w’s slab that are not already stored in the child cache of some ancestor of v. There are thus a total of Θ(B 2 ) points stored in v’s child cache. We can answer a three-sided query of the form [x1 , x2 ] × [y1 , +∞) by visiting a set of nodes in the base tree, starting with the root. For each visited node v, we pose the query [x1 , x2 ] × [y1 , +∞) to v’s child cache and output the results. The following rules are used to determine which of v’s children to visit: We visit v’s child w if either 1. w is along the leftmost search path for x1 or the rightmost search path for x2 in the base tree, or 2. the entire Y-set Y (w) is reported when v’s child cache is queried. (See Figure 27.8.) There are O(logB N ) nodes w that are visited because of rule 1. When rule 1 is not satisﬁed, rule 2 provides an eﬀective ﬁltering mechanism to guarantee outputsensitive reporting: The I/O cost for initially accessing a child node w can be charged to the Θ(B) points of Y (w) reported from v’s child cache; conversely, if not all of Y (w) is reported, then the points stored in w’s subtree will be too low to satisfy the query, and there is no need to visit w. (See Figure 27.8(b).) Provided that each child cache can be queried in O(1) I/Os plus the output-sensitive cost to output the points satisfying the query, the resulting overall query time is O(logB N + z), as desired. All that remains is to show how to query a child cache in a constant number of I/Os,

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-21

plus the output-sensitive cost. Arge et al. [15] provide an elegant and optimal static data structure for three-sided range search, which can be used in the EM priority search tree described above to implement the child caches of size O(B 2 ). The static structure is a persistent B-tree optimized for batched construction. When used for O(B 2 ) points, it occupies O(B) blocks, can be built in O(B) I/Os, and supports three-sided queries in O Z /B I/Os per query, where Z is the number of points reported. The static structure is so simple that it may be useful in practice on its own. Both the three-sided structure developed by Arge et al. [15] and the structure for twosided diagonal queries discussed in Section 27.4.3 satisfy Criteria O1–O3 of Section 27.1.2. So in a sense, the three-sided query structure subsumes the diagonal two-sided structure, since three-sided queries are more general. However, diagonal two-sided structure may prove to be faster in practice, because in each of its corner substructures, the data accessed during a query are always in contiguous blocks, whereas the static substructures used for three-sided search do not guarantee block contiguity. Empirical work is ongoing to evaluate the performance of these data structures. On a historical note, earlier work on two-sided and three-sided queries was done by Ramaswamy and Subramanian [99] using the notion of path caching; their structure met Criterion O1 but had higher storage overheads and amortized and/or nonoptimal update bounds. Subramanian and Ramaswamy [113] subsequently developed the p-range tree data structure for three-sided queries, with optimal linear disk space and nearly optimal query and amortized update bounds.

27.4.5

General Orthogonal 2-D Range Search

The dynamic data structure for three-sided range searching can be generalized using the ﬁltering technique of Chazelle [35] to handle general four-sided queries with optimalI/O query bound O(logB N + z) andoptimal disk space usage O n(log n)/ log(logB N + 1) [15]. The update bound becomes O (logB N )(log n)/log(logB N + 1) , which may not be optimal. The outer level of the structure is a balanced (logB N + 1)-way 1-D search tree with Θ(n) leaves, oriented, say, along the x-dimension. It therefore has about (log n)/ log(logB N + 1) levels. At each level of the tree, each input point is stored in four substructures (described below) that are associated with the particular tree node at that level that spans the x-value of the point. The space and update bounds quoted above follow from the fact that the substructures use linear space and can be updated in O(logB N ) I/Os. To search for the points in a four-sided query rectangle [x1 , x2 ] × [y1 , y2 ], we decompose the four-sided query in the following natural way into two three-sided queries, a stabbing query, and logB N − 1 list traversals: We ﬁnd the lowest node v in the tree whose x-range contains [x1 , x2 ]. If v is a leaf, we can answer the query in a single I/O. Otherwise we query the substructures stored in those children of v whose x-ranges intersect [x1 , x2 ]. Let 2 ≤ k ≤ logB N + 1 be the number of such children. The range query when restricted to the leftmost such child of v is a three-sided query of the form [x1 , +∞] × [y1 , y2 ], and when restricted to the rightmost such child of v, the range query is a three-sided query of the form [−∞, x2 ]×[y1 , y2 ]. Two of the substructures at each node are devoted for three-sided queries of these types; using the linear-sized data structures of Arge et al. [15] in Section 27.4.4, each such query can be done in O(logB N + z) I/Os. For the k − 2 intermediate children of v, their x-ranges are completely contained inside the x-range of the query rectangle, and thus we need only do k − 2 list traversals in y-order and retrieve the points whose y-values are in the range [y1 , y2 ]. If we store the points in each node in y-order (in the third type of substructure), the Z output points from a node can be found in O Z /B I/Os, once a starting point in the linear list is found. We can ﬁnd all

© 2005 by Chapman & Hall/CRC

27-22

Handbook of Data Structures and Applications

k −2 starting points via a single query to a stabbing query substructure S associated with v. (This structure is the fourth type of substructure.) For each two y-consecutive points (ai , bi ) and (ai+1 , bi+1 ) associated with a child of v, we store the y-interval [bi , bi+1 ] in S. Note that S contains intervals contributed by each of the logB N + 1 children of v. By a single stabbing query with query value y1 , we can thus identify the k − 2 starting points in only O(logB N ) I/Os [17], as described in Section 27.4.3. (We actually get starting points for all the children of v, not just the k − 2 ones of interest, but we can discard the starting points we don’t need.) The total number of I/Os to answer the range query is thus O(logB N + z), which is optimal.

27.4.6

Lower Bounds for Orthogonal Range Search

We mentioned in Section 27.4 that Subramanian and Ramaswamy [113] prove that no EM data structure for 2-D range searching can achieve design Criterion O1 of Section 27.1.2 using less than O n(log n)/ log(logB N + 1) disk blocks, even if we relax the criterion and allow O (logB N )c + z I/Os per query, for any constant c. The result holds for an EM version of the pointer machine model, based upon the approach of Chazelle [36] for the internal memory model. Hellerstein et al. [65] consider a generalization of the layout-based lower bound argument of Kanellakis et al. [74] for studying the tradeoﬀ between disk space usage and query performance. They develop a model for indexability, in which an “eﬃcient” data structure is expected to contain the Z output points to a query compactly within O Z/B = O z blocks. One shortcoming of the model is that it considers only data layout and ignores the search component of queries, and thus it rules out the important ﬁltering paradigm discussed earlier in Section 27.4. For example, it is reasonable for any query to perform at least logB N I/Os, so if the output size Z is at most B, a data structure may still be able to satisfy Criterion O1 even if the output is contained within O(logB N ) blocks rather than O(z) = O(1) blocks. Arge et al. [15] modify the model to rederive the same nonlinear space lower bound O n(log n)/ log(logB N + 1) of Subramanian and Ramaswamy [113] for 2-D range searching by considering only output sizes Z larger than (logB N )cB, for which the number of blocks allowed to hold the outputs is Z/B = O (logB N )c + z . This approach ignores the complexity of how to ﬁnd the relevant blocks, but as mentioned in Section 27.4.5, the authors separately provide an optimal 2-D range search data structure that uses the same amount of disk space and does queries in the optimal O(logB N + z) I/Os. Thus, despite its shortcomings, the indexability model is elegant and can provide much insight into the complexity of blocking data in external memory. Further results in this model appear in [79, 108]. One intuition from the indexability model is that less disk space is needed to eﬃciently answer 2-D queries when the queries have bounded aspect ratio (i.e., when the ratio of the longest side length to the shortest side length of the query rectangle is bounded). An interesting question is whether R-trees and the linear-space structures of Sections 27.4.1 and 27.4.2 can be shown to perform provably well for such queries. Another interesting scenario is where the queries correspond to snapshots of the continuous movement of a sliding rectangle. When the data structure is restricted to contain only a single copy of each point, Kanth and Singh [75] show for a restricted class of index-based trees that d-dimensional range queries in the worst case require Ω(n1−1/d + z) I/Os, and they provide a data structure with a matching bound. Another approach to achieve the same bound is the cross tree data structure [62] mentioned in Section 27.4.1, which in addition supports the operations of cut and concatenate.

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27.5

27-23

Related Problems

For other types of range searching, such as in higher dimensions and for nonorthogonal queries, diﬀerent ﬁltering techniques are needed. So far, relatively little work has been done, and many open problems remain. Vengroﬀ and Vitter [121] develop the ﬁrst theoretically near-optimal EM data structure for static three-dimensional orthogonal range searching. They create a hierarchical partitioning in which all the points that dominate a query point are densely contained in a set of blocks. Compression techniques are needed to minimize disk storage. With some recent modiﬁcations [126], queries can be done in O(logB N + z) I/Os, which is optimal, and the space usage is O n(log n)k+1 (log(logB N + 1))k disk blocks to support (3 + k)-sided 3-D range queries, in which k of the dimensions (0 ≤ k ≤ 3) have ﬁnite ranges. The result also provides optimal O(log N + Z)-time query performance for three-sided 3-D queries in the (internal memory) RAM model, but using O(N log N ) space. By the reduction in [37], a data structure for three-sided 3-D queries also applies to 2D homothetic range search, in which the queries correspond to scaled and translated (but not rotated) transformations of an arbitrary ﬁxed polygon. An interesting special case is “fat” orthogonal 2-D range search, where the query rectangles are required to have bounded aspect ratio. For example, every rectangle with bounded aspect ratio can be covered by two overlapping squares. An interesting open problem is to develop linear-sized optimal data structures for fat orthogonal 2-D range search. By the reduction, one possible approach would be to develop optimal linear-sized data structures for three-sided 3-D range search. Agarwal et al. [4] consider halfspace range searching, in which a query is speciﬁed by a hyperplane and a bit indicating one of its two sides, and the output of the query consists of all the points on that side of the hyperplane. They give various data structures for halfspace range searching in two, three, and higher dimensions, including one that works for simplex (polygon) queries in two dimensions, but with a higher query I/O cost. They have subsequently improved the storage bounds for halfspace range queries in two dimensions to obtain an optimal static data structure satisfying Criteria O1 and O2 of Section 27.1.2. The number of I/Os needed to build the data structures for 3-D orthogonal range search and halfspace range search is rather large (more than Ω(N )). Still, the structures shed useful light on the complexity of range searching and may open the way to improved solutions. An open problem is to design eﬃcient construction and update algorithms and to improve upon the constant factors. Callahan et al. [34] develop dynamic EM data structures for several online problems in d dimensions. For any ﬁxed > 0, they can ﬁnd an approximate nearest neighbor of a query point (within a 1 + factor of optimal) in O(logB N ) I/Os; insertions and deletions can also be done in O(log B N ) I/Os. They use a related approach to maintain the closest pair of points; each update costs O(logB N ) I/Os. Govindrajan et al. [60] achieve the same bounds for closest pair by maintaining a well-separated pair decomposition. For ﬁnding nearest neighbors and approximate nearest neighbors, two other approaches are partition trees [3, 4] and locality-sensitive hashing [58]. Numerous other data structures have been developed for range queries and related problems on spatial data. We refer to [8, 56, 92] for a broad survey.

27.6

Dynamic and Kinetic Data Structures

In this section we consider two scenarios where data items change: dynamic (in which items are inserted and deleted), and kinetic (in which the data items move continuously along

© 2005 by Chapman & Hall/CRC

27-24

Handbook of Data Structures and Applications

speciﬁed trajectories). In both cases, queries can be done at any time. It is often useful for kinetic data structures to allow insertions and deletions; for example, if the trajectory of an item changes, we must delete the old trajectory and insert the new one.

27.6.1

Logarithmic Method for Decomposable Search Problems

In previous sections, we’ve already encountered several dynamic data structures for the problems of dictionary lookup and range search. In Section 27.4 we saw how to develop optimal EM range search data structures by externalizing some known internal memory data structures. The key idea was to use the bootstrapping paradigm, together with weightbalanced B-trees as the underlying data structure, in order to consolidate several static data structures for small instances of range searching into one dynamic data structure for the full problem. The bootstrapping technique is speciﬁc to the particular data structures involved. In this section we look at another technique that is based upon the properties of the problem itself rather than upon that of the data structure. We call a problem decomposable if we can answer a query by querying individual subsets of the problem data and then computing the ﬁnal result from the solutions to each subset. Dictionary search and range searching are obvious examples of decomposable problems. Bentley developed the logarithmic method [29, 96] to convert eﬃcient static data structures for decomposable problems into general dynamic ones. In the internal memory setting, the logarithmic method consists of maintaining a series of static substructures, at most one each of size 1, 2, 4, 8,. . . . When a new item is inserted, it is initialized in a substructure of size 1. If a substructure of size 1 already exists, the two substructures are combined into a single substructure of size 2. If there is already a substructure of size 2, they in turn are combined into a single substructure of size 4, and so on. For the current value of N , it is easy to see that the kth substructure (i.e., of size 2k ) is present exactly when the kth bit in the binary representation of N is 1. Since there are at most log N substructures, the search time bound is log N times the search time per substructure. As the number of items increases from 1 to N , the kth structure is built a total of N/2k times (assuming N is a power of 2). If it can be built in O(2k ) time, the total time for all insertions and all substructures is thus O(N log N ), making the amortized insertion time O(log N ). If we use up to three substructures of size 2k at a time, we can do the reconstructions in advance and convert the amortized update bounds to worst-case [96]. In the EM setting, in order to eliminate the dependence upon the binary logarithm in the I/O bounds, the number of substructures must be reduced from log N to logB N , and thus the maximum size of the kth substructure must be increased from 2k to B k . As the number of items increases from 1 to N , the kth substructure has to be built N B/B k times k (when N is a power of B), each time taking O B (logB N )/B I/Os. The key point is that the extra factor of B in the numerator of the ﬁrst term is canceled by the factor of B in the denominator of the second term, and thus the resulting total insertion time over all N insertions and all logB N structures is O N (logB N )2 I/Os, which is O (logB N )2 I/Os amortized per insertion. By global rebuilding we can do deletions in O(logB N ) I/Os amortized. As in the internal memory case, the amortized updates can typically be made worst-case. Arge and Vahrenhold [16] obtain I/O bounds for dynamic point location in general planar subdivisions similar to those of [2], but without use of level-balanced trees. Their method uses a weight-balanced base structure at the outer level and a multislab structure for storing segments similar to that of Arge and Vitter [17] described in Section 27.4.3. They use the logarithmic method to construct a data structure to answer vertical rayshooting queries in the multislab structures. The method relies upon a total ordering of the segments, but such

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-25

an ordering can be changed drastically by a single insertion. However, each substructure in the logarithmic method is static (until it is combined with another substructure), and thus a static total ordering can be used for each substructure. The authors show by a type of fractional cascading that the queries in the logB N substructures do not have to be done independently, which saves a factor of logB N in the I/O cost, but at the cost of making the data structures amortized instead of worst-case. Agarwal et al. [6] apply the logarithmic method (in both the binary form and B-way variant) to get EM versions of kd-trees, BBD trees, and BAR trees.

27.6.2

Continuously Moving Items

Early work on temporal data generally concentrated on time-series or multiversion data [105]. A question of growing interest in this mobile age is how to store and index continuously moving items, such as mobile telephones, cars, and airplanes, using kinetic data structures (e.g., see [69, 104, 128]) . There are two main approaches to storing moving items: The ﬁrst technique is to use the same sort of data structure as for nonmoving data, but to update it whenever items move suﬃciently far so as to trigger important combinatorial events that are relevant to the application at hand [24]. For example, an event relevant for range search might be triggered when two items move to the same horizontal displacement (which happens when the x-ordering of the two items is about to switch). A diﬀerent approach is to store each item’s location and speed trajectory, so that no updating is needed as long as the item’s trajectory plan does not change. Such an approach requires fewer updates, but the representation for each item generally has higher dimension, and the search strategies are therefore less eﬃcient. Kollios et al. [78] developed a linear-space indexing scheme for moving points along a (one-dimensional) line, based upon the notion of partition trees. Their structure supports a variety of range search and approximate nearest neighbor queries. For example, given a range and time, the points in that range at the indicated time can be retrieved in O(n1/2+ + k) I/Os, for arbitrarily small > 0. Updates require O (log n)2 I/Os. Agarwal et al. [3] extend the approach to handle range searches in two dimensions, and they improve the update bound to O (logB n)2 I/Os. They also propose an event-driven data structure with the same query times as the range search data structure of Arge and Vitter [15] discussed in Section 27.4.5, but with the potential need to do many updates. A hybrid data structure combining the two approaches permits a tradeoﬀ between query performance and update frequency. R-trees oﬀer a practical generic mechanism for storing multidimensional points and are thus a natural alternative for storing mobile items. One approach is to represent time as a separate dimension and to cluster trajectories using the R-tree heuristics. However, the orthogonal nature of the R-tree does not lend itself well to diagonal trajectories. For the ˇ case of points moving along linear trajectories, Saltenis et al. [104] build the R-tree upon only the spatial dimensions, but parameterize the bounding box coordinates to account for the movement of the items stored within. They maintain an outer approximation of the true bounding box, which they periodically update to reﬁne the approximation. Agarwal and Har-Peled [9] show how to maintain a provably good approximation of the minimum bounding box with need for only a constant number of reﬁnement events. Further discussion of kinetic data structures, primarily for internal memory, appears in Chapter 23.

© 2005 by Chapman & Hall/CRC

27-26

27.7

Handbook of Data Structures and Applications

Conclusions

In this chapter we have surveyed several useful paradigms and techniques for the design and implementation of eﬃcient data structures for external memory. A variety of interesting challenges remain in geometric search applications, such as methods for high-dimensional and nonorthogonal range searches as well as the analysis of R-trees and linear-space methods for typical-case scenarios. A continuing goal is to translate theoretical gains into observable improvements in practice. For some of the problems that can be solved optimally up to a constant factor, the constant overhead is too large for the algorithm to be of practical use, and simpler approaches are needed.

Acknowledgment The author wishes to thank the members of the Center for Geometric Computing at Duke University for helpful comments and suggestions. This work was supported in part by the Army Research Oﬃce through grant DAAD19–03–1–0321, and by the National Science Foundation through research grants CCR–9877133 and CCR–0082986.

References [1] D. J. Abel. A B+ -tree structure for large quadtrees. Computer Vision, Graphics, and Image Processing, 27(1):19–31, July 1984. [2] P. K. Agarwal, L. Arge, G. S. Brodal, and J. S. Vitter. I/O-eﬃcient dynamic point location in monotone planar subdivisions. In Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, volume 10, pages 11–20, 1999. [3] P. K. Agarwal, L. Arge, and J. Erickson. Indexing moving points. In Proceedings of the ACM Symposium on Principles of Database Systems, volume 19, pages 175–186, 2000. [4] P. K. Agarwal, L. Arge, J. Erickson, P. G. Franciosa, and J. S. Vitter. Eﬃcient searching with linear constraints. Journal of Computer and System Sciences, 61(2):194– 216, October 2000. [5] P. K. Agarwal, L. Arge, T. M. Murali, K. Varadarajan, and J. S. Vitter. I/O-eﬃcient algorithms for contour line extraction and planar graph blocking. In Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, volume 9, pages 117–126, 1998. [6] P. K. Agarwal, L. Arge, O. Procopiuc, and J. S. Vitter. A framework for index dynamization. In Proceedings of the International Colloquium on Automata, Languages, and Programming, volume 2076 of Lecture Notes in Computer Science, Crete, Greece, 2001. Springer-Verlag. [7] P. K. Agarwal, M. de Berg, J. Gudmundsson, M. Hammar, and H. J. Haverkort. Constructing box trees and R-trees with low stabbing number. In Proceedings of the ACM Symposium on Computational Geometry, volume 17, June 2001. [8] P. K. Agarwal and J. Erickson. Geometric range searching and its relatives. In B. Chazelle, J. E. Goodman, and R. Pollack, editors, Advances in Discrete and Computational Geometry, volume 23 of Contemporary Mathematics, pages 1–56. American Mathematical Society Press, Providence, RI, 1999. [9] P. K. Agarwal and S. Har-Peled. Maintaining the approximate extent measures of moving points. In Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, volume 12, pages 148–157, Washington, January 2001. [10] L. Arge. The buﬀer tree: A new technique for optimal I/O-algorithms. In Proceedings

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

[11] [12]

[13]

[14]

[15]

[16]

[17] [18]

[19] [20] [21] [22]

[23]

[24] [25] [26]

[27]

[28]

27-27

of the Workshop on Algorithms and Data Structures, volume 955 of Lecture Notes in Computer Science, pages 334–345. Springer-Verlag, 1995. A complete version appears as BRICS technical report RS–96–28, University of Aarhus. L. Arge, K. H. Hinrichs, J. Vahrenhold, and J. S. Vitter. Eﬃcient bulk operations on dynamic R-trees. Algorithmica, 33(1):104–128, January 2002. L. Arge, O. Procopiuc, S. Ramaswamy, T. Suel, J. Vahrenhold, and J. S. Vitter. A uniﬁed approach for indexed and non-indexed spatial joins. In Proceedings of the International Conference on Extending Database Technology, volume 7, Konstanz, Germany, March 2000. L. Arge, O. Procopiuc, S. Ramaswamy, T. Suel, and J. S. Vitter. Scalable sweepingbased spatial join. In Proceedings of the International Conference on Very Large Databases, volume 24, pages 570–581, New York, August 1998. L. Arge, O. Procopiuc, S. Ramaswamy, T. Suel, and J. S. Vitter. Theory and practice of I/O-eﬃcient algorithms for multidimensional batched searching problems. In Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, volume 9, pages 685–694, 1998. L. Arge, V. Samoladas, and J. S. Vitter. Two-dimensional indexability and optimal range search indexing. In Proceedings of the ACM Conference on Principles of Database Systems, volume 18, pages 346–357, Philadelphia, PA, May–June 1999. L. Arge and J. Vahrenhold. I/O-eﬃcient dynamic planar point location. In Proceedings of the ACM Symposium on Computational Geometry, volume 9, pages 191–200, June 2000. L. Arge and J. S. Vitter. Optimal dynamic interval management in external memory. SIAM Journal on Computing, 32(6):1488–1508, 2003. Lars Arge, Darren Erik Vengroﬀ, and Jeﬀrey Scott Vitter. External-memory algorithms for processing line segments in geographic information systems. Algorithmica, to appear. R. Baeza-Yates. Bounded disorder: The eﬀect of the index. Theoretical Computer Science, 168:21–38, 1996. R. A. Baeza-Yates. Expected behaviour of B+ -trees under random insertions. Acta Informatica, 26(5):439–472, 1989. R. A. Baeza-Yates and P.-A. Larson. Performance of B+ -trees with partial expansions. IEEE Transactions on Knowledge and Data Engineering, 1(2):248–257, June 1989. R. D. Barve, E. A. M. Shriver, P. B. Gibbons, B. K. Hillyer, Y. Matias, and J. S. Vitter. Modeling and optimizing I/O throughput of multiple disks on a bus: The long version. Technical report, Bell Labs, 1997. Rakesh D. Barve and Jeﬀrey S. Vitter. External memory algorithms with dynamically changing memory allocations: Long version. Technical Report CS–1998–09, Duke University, 1998. J. Basch, L. J. Guibas, and J. Hershberger. Data structures for mobile data. Journal of Algorithms, 31:1–28, 1999. R. Bayer and E. McCreight. Organization of large ordered indexes. Acta Informatica, 1:173–189, 1972. Bruno Becker, Stephan Gschwind, Thomas Ohler, Bernhard Seeger, and Peter Widmayer. An asymptotically optimal multiversion B-tree. VLDB Journal, 5(4):264–275, December 1996. N. Beckmann, H.-P. Kriegel, R. Schneider, and B. Seeger. The R*-tree: An eﬃcient and robust access method for points and rectangles. In Proceedings of the ACM SIGMOD International Conference on Management of Data, pages 322–331, 1990. J. L. Bentley. Multidimensional divide and conquer. Communications of the ACM,

© 2005 by Chapman & Hall/CRC

27-28

Handbook of Data Structures and Applications

23(6):214–229, 1980. [29] J. L. Bentley and J. B. Saxe. Decomposable searching problems I: Static-to-dynamic transformations. Journal of Algorithms, 1(4):301–358, December 1980. [30] S. Berchtold, C. B¨ ohm, and H-P. Kriegel. Improving the query performance of highdimensional index structures by bulk load operations. In Proceedings of the International Conference on Extending Database Technology, volume 1377 of Lecture Notes in Computer Science, pages 216–230, 1998. [31] Norbert Blum and Kurt Mehlhorn. On the average number of rebalancing operations in weight-balanced trees. Theoretical Computer Science, 11(3):303–320, July 1980. [32] K. Brengel, A. Crauser, P. Ferragina, and U. Meyer. An experimental study of priority queues. In J. S. Vitter and C. Zaroliagis, editors, Proceedings of the Workshop on Algorithm Engineering, volume 1668 of Lecture Notes in Computer Science, pages 345–359, London, July 1999. Springer-Verlag. [33] Gerth S. Brodal and Jyrki Katajainen. Worst-case eﬃcient external-memory priority queues. In Proceedings of the Scandinavian Workshop on Algorithmic Theory, volume 1432 of Lecture Notes in Computer Science, pages 107–118, Stockholm, Sweden, July 1998. Springer-Verlag. [34] P. Callahan, M. T. Goodrich, and K. Ramaiyer. Topology B-trees and their applications. In Proceedings of the Workshop on Algorithms and Data Structures, volume 955 of Lecture Notes in Computer Science, pages 381–392. Springer-Verlag, 1995. [35] Bernard Chazelle. Filtering search: A new approach to query-answering. SIAM Journal on Computing, 15:703–724, 1986. [36] Bernard Chazelle. Lower bounds for orthogonal range searching: I. The reporting case. Journal of the ACM, 37(2):200–212, April 1990. [37] Bernard Chazelle and H. Edelsbrunner. Linear space data structures for two types of range search. Discrete and Computational Geometry, 2:113–126, 1987. [38] P. M. Chen, E. K. Lee, G. A. Gibson, R. H. Katz, and D. A. Patterson. RAID: highperformance, reliable secondary storage. ACM Computing Surveys, 26(2):145–185, June 1994. [39] Y.-J. Chiang. Experiments on the practical I/O eﬃciency of geometric algorithms: Distribution sweep vs. plane sweep. Computational Geometry: Theory and Applications, 8(4):211–236, 1998. [40] Y.-J. Chiang and C. T. Silva. External memory techniques for isosurface extraction in scientiﬁc visualization. In J. Abello and J. S. Vitter, editors, External Memory Algorithms and Visualization, DIMACS Series in Discrete Mathematics and Theoretical Computer Science, pages 247–277, Providence, RI, 1999. American Mathematical Society Press. [41] Yi-Jen Chiang, Michael T. Goodrich, Edward F. Grove, Roberto Tamassia, Darren Erik Vengroﬀ, and Jeﬀrey Scott Vitter. External-memory graph algorithms. In Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, volume 6, pages 139–149, January 1995. [42] K. L. Clarkson and P. W. Shor. Applications of random sampling in computational geometry, II. Discrete and Computational Geometry, 4:387–421, 1989. [43] D. Comer. The ubiquitous B-tree. ACM Computing Surveys, 11(2):121–137, 1979. [44] A. Crauser, P. Ferragina, K. Mehlhorn, U. Meyer, and E. A. Ramos. Randomized external-memory algorithms for geometric problems. In Proceedings of the ACM Symposium on Computational Geometry, volume 14, pages 259–268, June 1998. [45] A. Crauser, P. Ferragina, K. Mehlhorn, U. Meyer, and E. A. Ramos. I/O-optimal computation of segment intersections. In J. Abello and J. S. Vitter, editors, External Memory Algorithms and Visualization, DIMACS Series in Discrete Mathematics

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

[46]

[47] [48]

[49] [50] [51] [52] [53] [54]

[55]

[56] [57] [58]

[59]

[60]

[61]

[62]

[63]

27-29

and Theoretical Computer Science, pages 131–138. American Mathematical Society Press, Providence, RI, 1999. M. de Berg, J. Gudmundsson, M. Hammar, and M. Overmars. On R-trees with low stabbing number. In Proceedings of the European Symposium on Algorithms, volume 1879 of Lecture Notes in Computer Science, pages 167–178, Saarbr¨ ucken, Germany, September 2000. Springer-Verlag. Mark de Berg, Mark van Kreveld, Mark Overmars, and Otfried Schwarzkopf. Computational Geometry Algorithms and Applications. Springer-Verlag, Berlin, 1997. W. Dittrich, D. Hutchinson, and A. Maheshwari. Blocking in parallel multisearch problems. In Proceedings of the ACM Symposium on Parallel Algorithms and Architectures, volume 10, pages 98–107, 1998. J. R. Driscoll, N. Sarnak, D. D. Sleator, and R. E. Tarjan. Making data structures persistent. Journal of Computer and System Sciences, 38:86–124, 1989. M. C. Easton. Key-sequence data sets on indelible storage. IBM Journal of Research and Development, 30:230–241, 1986. H. Edelsbrunner. A new approach to rectangle intersections, part I. International Journal of Computer Mathematics, 13:209–219, 1983. H. Edelsbrunner. A new approach to rectangle intersections, part II. International Journal of Computer Mathematics, 13:221–229, 1983. NASA’s Earth Observing System (EOS) web page, NASA Goddard Space Flight Center, http://eospso.gsfc.nasa.gov/. G. Evangelidis, D. B. Lomet, and B. Salzberg. The hBΠ -tree: A multi-attribute index supporting concurrency, recovery and node consolidation. VLDB Journal, 6:1–25, 1997. Thomas A. Funkhouser, Carlo H. Sequin, and Seth J. Teller. Management of large amounts of data in interactive building walkthroughs. In Proceedings of the ACM SIGGRAPH Conference on Computer Graphics, pages 11–20, Boston, March 1992. V. Gaede and O. G¨ unther. Multidimensional access methods. ACM Computing Surveys, 30(2):170–231, June 1998. I. Gargantini. An eﬀective way to represent quadtrees. Communications of the ACM, 25(12):905–910, December 1982. Aristides Gionis, Piotr Indyk, and Rajeev Motwani. Similarity search in high dimensions via hashing. In Proceedings of the International Conference on Very Large Databases, volume 25, pages 78–89, Edinburgh, Scotland, 1999. Morgan Kaufmann Publishers. M. T. Goodrich, J.-J. Tsay, D. E. Vengroﬀ, and J. S. Vitter. External-memory computational geometry. In Proceedings of the IEEE Symposium on Foundations of Computer Science, volume 34, pages 714–723, Palo Alto, November 1993. Sathish Govindarajan, Tam´ as Lukovszki, Anil Maheshari, and Norbert Zeh. I/Oeﬃcient well-separated pair decomposition and its applications. In Proceedings of the European Symposium on Algorithms, volume 1879 of Lecture Notes in Computer Science, Saarbr¨ ucken, Germany, September 2000. Springer Verlag. D. Greene. An implementation and performance analysis of spatial data access methods. In Proceedings of IEEE International Conference on Data Engineering, volume 5, pages 606–615, 1989. Roberto Grossi and Giuseppe F. Italiano. Eﬃcient cross-trees for external memory. In J. Abello and J. S. Vitter, editors, External Memory Algorithms and Visualization, DIMACS Series in Discrete Mathematics and Theoretical Computer Science, pages 87–106. American Mathematical Society Press, Providence, RI, 1999. Roberto Grossi and Giuseppe F. Italiano. Eﬃcient splitting and merging algorithms

© 2005 by Chapman & Hall/CRC

27-30

Handbook of Data Structures and Applications

for order decomposable problems. Information and Computation, in press. An earlier version appears in Proceedings of the International Colloquium on Automata, Languages and Programming, volume 1256 of Lecture Notes in Computer Science, Springer Verlag, 605–615, 1997. [64] Antonin Guttman. R-trees: A dynamic index structure for spatial searching. In

[65]

[66]

[67] [68]

[69]

[70]

[71]

[72]

[73]

[74]

[75]

[76] [77] [78]

[79]

Proceedings of the ACM SIGMOD International Conference on Management of Data, pages 47–57, 1984. Joseph M. Hellerstein, Elias Koutsoupias, and Christos H. Papadimitriou. On the analysis of indexing schemes. In Proceedings of the ACM Symposium on Principles of Database Systems, volume 16, pages 249–256, Tucson, AZ, May 1997. L. Hellerstein, G. Gibson, R. M. Karp, R. H. Katz, and D. A. Patterson. Coding techniques for handling failures in large disk arrays. Algorithmica, 12(2–3):182–208, 1994. K. H. Hinrichs. The grid ﬁle system: Implementation and case studies of applications. Ph.d., Dept. Information Science, ETH, Z¨ urich, 1985. D. Hutchinson, A. Maheshwari, J-R. Sack, and R. Velicescu. Early experiences in implementing the buﬀer tree. In Proceedings of the Workshop on Algorithm Engineering, volume 1, 1997. D. Pfoser C. S. Jensen and Y. Theodoridis. Novel approaches to the indexing of moving object trajectories. In Proceedings of the International Conference on Very Large Databases, volume 26, pages 395–406, Cairo, 2000. I. Kamel and C. Faloutsos. On packing R-trees. In Proceedings of the International ACM Conference on Information and Knowledge Management, volume 2, pages 490–499, 1993. I. Kamel and C. Faloutsos. Hilbert R-tree: An improved R-tree using fractals. In Proceedings of the International Conference on Very Large Databases, volume 20, pages 500–509, 1994. I. Kamel, M. Khalil, and V. Kouramajian. Bulk insertion in dynamic R-trees. In Proceedings of the International Symposium on Spatial Data Handling, volume 4, pages 3B, 31–42, 1996. P. C. Kanellakis, G. M. Kuper, and P. Z. Revesz. Constraint query languages. In Proceedings of the ACM Conference on Principles of Database Systems, volume 9, pages 299–313, 1990. P. C. Kanellakis, S. Ramaswamy, D. E. Vengroﬀ, and J. S. Vitter. Indexing for data models with constraints and classes. Journal of Computer and System Sciences, 52(3):589–612, 1996. K. V. R. Kanth and A. K. Singh. Optimal dynamic range searching in non-replicating index structures. In Proceedings of the International Conference on Database Theory, volume 1540 of Lecture Notes in Computer Science, pages 257–276. SpringerVerlag, January 1999. D. G. Kirkpatrick and R. Seidel. The ultimate planar convex hull algorithm? SIAM Journal on Computing, 15:287–299, 1986. D. E. Knuth. Sorting and Searching, volume 3 of The Art of Computer Programming. Addison-Wesley, Reading, MA, 2nd edition, 1998. G. Kollios, D. Gunopulos, and V. J. Tsotras. On indexing mobile objects. In Proceedings of the ACM Symposium on Principles of Database Systems, volume 18, pages 261–272, 1999. E. Koutsoupias and D. S. Taylor. Tight bounds for 2-dimensional indexing schemes. In Proceedings of the ACM Symposium on Principles of Database Systems, volume 17, pages 52–58, Seattle, WA, June 1998.

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-31

[80] R. Krishnamurthy and K.-Y. Wang. Multilevel grid ﬁles. Tech. report, IBM T. J. Watson Center, Yorktown Heights, NY, November 1985. [81] K. K¨ uspert. Storage utilization in B*-trees with a generalized overﬂow technique. Acta Informatica, 19:35–55, 1983. [82] Robert Laurini and Derek Thompson. Fundamentals of Spatial Information Systems. Academic Press, 1992. [83] Philip L. Lehman and S. Bing Yao. Eﬃcient locking for concurrent operations on B-Trees. ACM Transactions on Database Systems, 6(4):650–570, December 1981. [84] W. Litwin and D. Lomet. A new method for fast data searches with keys. IEEE Software, 4(2):16–24, March 1987. [85] D. Lomet. A simple bounded disorder ﬁle organization with good performance. ACM Transactions on Database Systems, 13(4):525–551, 1988. [86] D. B. Lomet and B. Salzberg. The hB-tree: A multiattribute indexing method with good guaranteed performance. ACM Transactions on Database Systems, 15(4):625– 658, 1990. [87] David B. Lomet and Betty Salzberg. Concurrency and recovery for index trees. VLDB Journal, 6(3):224–240, 1997. [88] E. M. McCreight. Priority search trees. SIAM Journal on Computing, 14(2):257– 276, May 1985. [89] C. Mohan. ARIES/KVL: A key-value locking method for concurrency control of multiaction transactions on B-tree indices. In Proceedings of the International Conference on Very Large Databases, volume 16, page 392, Brisbane, Australia, August 1990. [90] J. Nievergelt, H. Hinterberger, and K. C. Sevcik. The grid ﬁle: An adaptable, symmetric multi-key ﬁle structure. ACM Transactions on Database Systems, 9:38–71, 1984. [91] J. Nievergelt and E. M. Reingold. Binary search tree of bounded balance. SIAM Journal on Computing, 2(1), 1973. [92] J. Nievergelt and P. Widmayer. Spatial data structures: Concepts and design choices. In M. van Kreveld, J. Nievergelt, T. Roos, and P. Widmayer, editors, Algorithmic Foundations of GIS, volume 1340 of Lecture Notes in Computer Science, page 153 ﬀ. Springer-Verlag, 1997. [93] Patrick E. O’Neil. The SB-tree. an index-sequential structure for high-performance sequential access. Acta Informatica, 29(3):241–265, June 1992. [94] J. A. Orenstein. Redundancy in spatial databases. In Proceedings of the ACM SIGMOD International Conference on Management of Data, pages 294–305, Portland, OR, June 1989. [95] J. A. Orenstein and T. H. Merrett. A class of data structures for associative searching. In Proceedings of the ACM Conference on Principles of Database Systems, volume 3, pages 181–190, 1984. [96] M. H. Overmars. The Design of Dynamic Data Structures. Lecture Notes in Computer Science. Springer-Verlag, 1983. [97] Jignesh M. Patel and David J. DeWitt. Partition based spatial-merge join. In Proceedings of the ACM SIGMOD International Conference on Management of Data, pages 259–270, June 1996. [98] F. P. Preparata and M. I. Shamos. Computational Geometry. Springer-Verlag, Berlin, 1985. [99] S. Ramaswamy and S. Subramanian. Path caching: A technique for optimal external searching. In Proceedings of the ACM Conference on Principles of Database Systems, volume 13, pages 25–35, Minneapolis, MN, 1994.

© 2005 by Chapman & Hall/CRC

27-32

Handbook of Data Structures and Applications

[100] J. Rao and K. Ross. Cache conscious indexing for decision-support in main memory. In Malcolm Atkinson et al., editors, Proceedings of the International Conference on Very Large Databases, volume 25, pages 78–89, Los Altos, CA, 1999. Morgan Kaufmann Publishers. [101] Jun Rao and Kenneth A. Ross. Making B+ -trees cache conscious in main memory. In Weidong Chen, Jeﬀery Naughton, and Philip A. Bernstein, editors, Proceedings of the ACM SIGMOD International Conference on Management of Data, pages 475–486, Dallas, Texas, 2000. [102] J. T. Robinson. The k -d-b-tree: A search structure for large multidimensional dynamic indexes. In Proceedings of the ACM Conference on Principles of Database Systems, volume 1, pages 10–18, 1981. [103] C. Ruemmler and J. Wilkes. An introduction to disk drive modeling. IEEE Computer, pages 17–28, March 1994. ˇ [104] Simonas Saltenis, Christian S. Jensen, Scott T. Leutenegger, and Mario A. Lopez. Indexing the positions of continuously moving objects. In Weidong Chen, Jeﬀery Naughton, and Philip A. Bernstein, editors, Proceedings of the ACM SIGMOD International Conference on Management of Data, pages 331–342, Dallas, Texas, 2000. [105] B. Salzberg and V. J. Tsotras. Comparison of access methods for time-evolving data. ACM Computing Surveys, 31:158–221, June 1999. [106] Hanan Samet. Applications of Spatial Data Structures: Computer Graphics, Image Processing, and GIS. Addison-Wesley, 1989. [107] Hanan Samet. The Design and Analysis of Spatial Data Structures. AddisonWesley, 1989. [108] V. Samoladas and D. Miranker. A lower bound theorem for indexing schemes and its application to multidimensional range queries. In Proceedings of the ACM Symposium on Principles of Database Systems, volume 17, pages 44–51, Seattle, WA, June 1998. [109] Peter Sanders. Fast priority queues for cached memory. In Workshop on Algorithm Engineering and Experimentation, volume 1619 of Lecture Notes in Computer Science, pages 312–327. Springer-Verlag, January 1999. [110] B. Seeger and H.-P. Kriegel. The buddy-tree: An eﬃcient and robust access method for spatial data base systems. In Proceedings of the International Conference on Very Large Databases, volume 16, pages 590–601, 1990. [111] Elizabeth Shriver, Arif Merchant, and John Wilkes. An analytic behavior model for disk drives with readahead caches and request reordering. In Proceedings of ACM

[112] [113]

[114] [115] [116] [117]

SIGMETRICS Joint International Conference on Measurement and Modeling of Computer Systems, pages 182–191, June 1998. B. Srinivasan. An adaptive overﬂow technique to defer splitting in b-trees. The Computer Journal, 34(5):397–405, 1991. S. Subramanian and S. Ramaswamy. The P-range tree: A new data structure for range searching in secondary memory. In Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, volume 6, pages 378–387, 1995. R. Tamassia and J. S. Vitter. Optimal cooperative search in fractional cascaded data structures. Algorithmica, 15(2):154–171, February 1996. Microsoft’s TerraServer online database of satellite images, available on the WorldWide Web at http://terraserver.microsoft.com/. TIGER/Line (tm). 1992 technical documentation. Technical report, U. S. Bureau of the Census, 1992. TPIE user manual and reference, 1999. The manual and software distribution are

© 2005 by Chapman & Hall/CRC

Geometric and Spatial Data Structures in External Memory

27-33

available on the web at http://www.cs.duke.edu/TPIE/. [118] J. van den Bercken, B. Seeger, and P. Widmayer. A generic approach to bulk loading multidimensional index structures. In Proceedings of the International Conference on Very Large Databases, volume 23, pages 406–415, 1997. [119] M. van Kreveld, J. Nievergelt, T. Roos, and P. Widmayer, editors. Algorithmic Foundations of GIS, volume 1340 of Lecture Notes in Computer Science. SpringerVerlag, 1997. [120] Peter J. Varman and Rakesh M. Verma. An eﬃcient multiversion access structure. IEEE Transactions on Knowledge and Data Engineering, 9(3):391–409, May–June 1997. [121] D. E. Vengroﬀ and J. S. Vitter. Eﬃcient 3-d range searching in external memory. In Proceedings of the ACM Symposium on Theory of Computing, volume 28, pages 192–201, Philadelphia, PA, May 1996. [122] Darren Erik Vengroﬀ and Jeﬀrey Scott Vitter. I/O-eﬃcient scientiﬁc computation using TPIE. In Proceedings of NASA Goddard Conference on Mass Storage Systems, volume 5, pages II, 553–570, September 1996. [123] J. S. Vitter. Eﬃcient memory access in large-scale computation. In Proceedings of the Symposium on Theoretical Aspects of Computer Science, volume 480 of Lecture Notes in Computer Science, pages 26–41. Springer-Verlag, 1991. Invited paper. [124] J. S. Vitter. External memory algorithms and data structures: Dealing with MASSIVE DATA. ACM Computing Surveys, 33(2):209–271, June 2001. [125] J. S. Vitter and E. A. M. Shriver. Algorithms for parallel memory I: Two-level memories. Algorithmica, 12(2–3):110–147, 1994. [126] J. S. Vitter and D. E. Vengroﬀ. Notes, 1999. [127] D.E. Willard and G.S. Lueker. Adding range restriction capability to dynamic data structures. Journal of the ACM, 32(3):597–617, 1985. [128] Ouri Wolfson, Prasad Sistla, Bo Xu, Jutai Zhou, and Sam Chamberlain. DOMINO: Databases fOr MovINg Objects tracking. In Alex Delis, Christos Faloutsos, and Shahram Ghandeharizadeh, editors, Proceedings of the ACM SIGMOD International Conference on Management of Data, pages 547–549, May 1999. [129] A. C. Yao. On random 2-3 trees. Acta Informatica, 9:159–170, 1978. [130] Stanley B. Zdonik and David Maier, editors. Readings in Object-Oriented Database Systems. Morgan Kauﬀman, 1990. [131] B. Zhu. Further computational geometry in secondary memory. In Proceedings of the International Symposium on Algorithms and Computation, volume 834 of Lecture Notes in Computer Science, page 514 ﬀ. Springer-Verlag, 1994.

© 2005 by Chapman & Hall/CRC

V Miscellaneous Data Structures 28 Tries

Sartaj Sahni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-1

What Is a Trie? • Searching a Trie • Keys with Diﬀerent Length • Height of a Trie • Space Required and Alternative Node Structures • Inserting into a Trie • Removing an Element • Preﬁx Search and Applications • Compressed Tries • Patricia

29 Suﬃx Trees and Suﬃx Arrays

Srinivas Aluru . . . . . . . . . . . . . . . . . . . . . . . 29-1

Basic Deﬁnitions and Properties • Linear Time Construction Algorithms tions • Lowest Common Ancestors • Advanced Applications

30 String Searching Introduction Heap

•

•

Applica-

Andrzej Ehrenfeucht and Ross M. McConnell . . . . . . . 30-1

Preliminaries

•

The DAWG

31 Persistent Data Structures

•

The Compact DAWG

•

The Position

Haim Kaplan . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-1

Introduction • Algorithmic Applications of Persistent Data Structures • General Techniques for Making Data Structures Persistent • Making Speciﬁc Data Structures More Eﬃcient • Concluding Remarks and Open Questions

32 PQ Trees, PC Trees, and Planar Graphs Wen-Lian Hsu and Ross M. McConnell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-1 Introduction

•

The Consecutive-Ones Problem

33 Data Structures for Sets

•

Planar Graphs

•

Acknowledgment

Rajeev Raman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-1

Introduction • Simple Randomized Set Representations • Equality Testing • Extremal Sets and Subset Testing • The Disjoint Set Union-Find Problem • Partition Maintenance Algorithms • Conclusions

34 Cache-Oblivious Data Structures Lars Arge, Gerth Stølting Brodal, and Rolf Fagerberg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-1 The Cache-Oblivious Model • Fundamental Primitives • Dynamic B-Trees • Priority Queues • 2d Orthogonal Range Searching

35 Dynamic Trees Camil Demetrescu, Irene Finocchi, and Giuseppe F. Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-1 Introduction • Linking and Cutting Trees • Reachability Trees • Conclusions

•

Topology Trees

•

Top Trees

•

ET Trees

36 Dynamic Graphs Camil Demetrescu, Irene Finocchi, and Giuseppe F. Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-1 Introduction • Techniques for Undirected Graphs • Techniques for Directed Graphs • Connectivity • Minimum Spanning Tree • Transitive Closure • All-Pairs Shortest Paths • Conclusions

37 Succinct Representation of Data Structures J. Ian Munro and S. Srinivasa Rao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-1

© 2005 by Chapman & Hall/CRC

Introduction • Bitvector • Succinct Dictionaries • Tree Representations • Graph Representations • Succinct Structures for Indexing • Permutations and Functions • Partial Sums • Arrays • Conclusions

38 Randomized Graph Data-Structures for Approximate Shortest Paths Surender Baswana and Sandeep Sen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-1 Introduction • A Randomized Data-Structure for Static APASP : Approximate Distance Oracles • A Randomized Data-Structure for Decremental APASP • Further Reading and Bibliography

39 Searching and Priority Queues in o(log n) Time

Arne Andersson . 39-1

Introduction • Model of Computation • Overview • Achieving Sub-Logarithmic Time per Element by Simple Means • Deterministic Algorithms and Linear Space • From Amortized Update Cost to Worst-Case • Sorting and Priority Queues

© 2005 by Chapman & Hall/CRC

28 Tries 28.1 28.2 28.3 28.4 28.5 28.6 28.7 28.8 28.9

What Is a Trie? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-1 Searching a Trie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-2 Keys with Diﬀerent Length . . . . . . . . . . . . . . . . . . . . . . . 28-3 Height of a Trie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-3 Space Required and Alternative Node Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-4 Inserting into a Trie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-7 Removing an Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-8 Preﬁx Search and Applications . . . . . . . . . . . . . . . . . . . 28-9 Compressed Tries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-10 Compressed Tries with Digit Numbers • Compressed Tries with Skip Fields • Compressed Tries with Edge Information • Space Required by a Compressed Trie

28.10 Patricia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-15

Sartaj Sahni

Searching Element

University of Florida

28.1

•

Inserting an Element

•

Removing an

What Is a Trie?

A trie (pronounced “try” and derived from the word retrieval) is a data structure that uses the digits in the keys to organize and search the dictionary. Although, in practice, we can use any radix to decompose the keys into digits, in our examples, we shall choose our radixes so that the digits are natural entities such as decimal digits (0, 1, 2, 3, 4, 5, 6, 7, 8, 9) and letters of the English alphabet (a − z, A − Z). Suppose that the elements in our dictionary are student records that contain ﬁelds such as student name, major, date of birth, and social security number (SS#). The key ﬁeld is the social security number, which is a nine digit decimal number. To keep the example manageable, assume that the dictionary has only ﬁve elements. Table 28.1 shows the name and SS# ﬁelds for each of the ﬁve elements in our dictionary. To obtain a trie representation for these ﬁve elements, we ﬁrst select a radix that will be used to decompose each key into digits. If we use the radix 10, the decomposed digits are

Name Jack Jill Bill Kathy April

TABLE 28.1

Social Security Number (SS#) 951-94-1654 562-44-2169 271-16-3624 278-49-1515 951-23-7625

Five elements (student records) in a dictionary

28-1

© 2005 by Chapman & Hall/CRC

28-2

Handbook of Data Structures and Applications 0 1 2 3 4 5 6 7 8 9 A

5

7 B

C 562-44-2169

1

D

8

1

E

F

2 G 271-16-3624

H 278-49-1515

9

I

J 951-23-7625

K 951-94-1654

FIGURE 28.1: Trie for the elements of Table 28.1. just the decimal digits shown in Table 28.1. We shall examine the digits of the key ﬁeld (i.e., SS#) from left to right. Using the ﬁrst digit of the SS#, we partition the elements into three groups–elements whose SS# begins with 2 (i.e., Bill and Kathy), those that begin with 5 (i.e., Jill), and those that begin with 9 (i.e., April and Jack). Groups with more than one element are partitioned using the next digit in the key. This partitioning process is continued until every group has exactly one element in it. The partitioning process described above naturally results in a tree structure that has 10-way branching as is shown in Figure 28.1. The tree employs two types of nodes–branch nodes and element nodes. Each branch node has 10 children (or pointer/reference) ﬁelds. These ﬁelds, child[0 : 9], have been labeled 0, 1, · · · , 9 for the root node of Figure 28.1. root.child[i] points to the root of a subtrie that contains all elements whose ﬁrst digit is i. In Figure 28.1, nodes A, B, D, E, F, and I are branch nodes. The remaining nodes, nodes C, G, H, J, and K are element nodes. Each element node contains exactly one element of the dictionary. In Figure 28.1, only the key ﬁeld of each element is shown in the element nodes.

28.2

Searching a Trie

To search a trie for an element with a given key, we start at the root and follow a path down the trie until we either fall oﬀ the trie (i.e., we follow a null pointer in a branch node) or we reach an element node. The path we follow is determined by the digits of the search key. Consider the trie of Figure 28.1. Suppose we are to search for an element with key 951-23-7625. We use the ﬁrst digit, 9, in the key to move from the root node A to the node A.child[9] = D. Since D is a branch node, we use the next digit, 5, of the key to move further down the trie. The node we reach is D.child[5] = F . To move to the next level of the trie, we use the next digit, 1, of the key. This move gets us to the node F.child[1] = I. Once again, we are at a branch node and must move further down the trie. For this move, we use the next digit, 2, of the key, and we reach the element node I.child[2] = J. When an element node is reached, we compare the search key and the key of the element in the reached element node. Performing this comparison at node J, we get a match. The element in node J, is to be returned as the result of the search. When searching the trie of Figure 28.1 for an element with key 951-23-1669, we follow the same path as for the key 951-23-7625. The key comparison made at node J tells us that the trie has no element with key 951-23-1669, and the search returns the value null.

© 2005 by Chapman & Hall/CRC

Tries

28-3

To search for the element with key 562-44-2169, we begin at the root A and use the ﬁrst digit, 5, of the search key to reach the element node A.child[5] = C. The key of the element in node C is compared with the search key. Since the two keys agree, the element in node C is returned. When searching for an element with key 273-11-1341, we follow the path A, A.child[2] = B, B.child[7] = E, E.child[3] = null. Since we fall oﬀ the trie, we know that the trie contains no element whose key is 273-11-1341. When analyzing the complexity of trie operations, we make the assumption that we can obtain the next digit of a key in O(1) time. Under this assumption, we can search a trie for an element with a d digit key in O(d) time.

28.3

Keys with Diﬀerent Length

In the example of Figure 28.1, all keys have the same number of digits (i.e., 9). In many applications, however, diﬀerent keys have diﬀerent length. This does not pose a problem unless one key is a preﬁx of another (for example, 27 is a preﬁx of 276). For applications in which one key may be a preﬁx of another, we normally add a special digit (say #) at the end of each key. Doing this ensures that no key is a preﬁx of another. To see why we cannot permit a key that is a preﬁx of another key, consider the example of Figure 28.1. Suppose we are to search for an element with the key 27. Using the search strategy just described, we reach the branch node E. What do we do now? There is no next digit in the search key that can be used to reach the terminating condition (i.e., you either fall oﬀ the trie or reach an element node) for downward moves. To resolve this problem, we add the special digit # at the end of each key and also increase the number of children ﬁelds in an element node by one. The additional child ﬁeld is used when the next digit equals #. An alternative to adding a special digit at the end of each key is to give each node a data ﬁeld that is used to store the element (if any) whose key exhausts at that node. So, for example, the element whose key is 27 can be stored in node E of Figure 28.1. When this alternative is used, the search strategy is modiﬁed so that when the digits of the search key are exhausted, we examine the data ﬁeld of the reached node. If this data ﬁeld is empty, we have no element whose key equals the search key. Otherwise, the desired element is in this data ﬁeld. It is important to note that in applications that have diﬀerent length keys with the property that no key is a preﬁx of another, neither of just mentioned strategies is needed; the scheme described in Section 28.2 works as is.

28.4

Height of a Trie

In the worst case, a root-node to element-node path has a branch node for every digit in a key. Therefore, the height∗ of a trie is at most numberof digits + 1. A trie for social security numbers has a height that is at most 10. If we assume that it takes the same time to move down one level of a trie as it does to move down one level of a binary search tree, then with at most 10 moves we can search a social-security trie. With this

∗ The deﬁnition of height used in this chapter is: the height of a trie equals the number of levels in that trie.

© 2005 by Chapman & Hall/CRC

28-4

Handbook of Data Structures and Applications

firstNode

2

B

9

D null

FIGURE 28.2: Chain for node A of Figure 28.1. many moves, we can search a binary search tree that has at most 210 − 1 = 1023 elements. This means that, we expect searches in the social security trie to be faster than searches in a binary search tree (for student records) whenever the number of student records is more than 1023. The breakeven point will actually be less than 1023 because we will normally not be able to construct full or complete binary search trees for our element collection. Since a SS# is nine digits, a social security trie can have up to 109 elements in it. An AVL tree with 109 elements can have a height that is as much as (approximately) 1.44 log2 (109 + 2) = 44. Therefore, it could take us four times as much time to search for elements when we organize our student-record dictionary as an AVL tree than when this dictionary is organized as a trie!

28.5

Space Required and Alternative Node Structures

The use of branch nodes that have as many child ﬁelds as the radix of the digits (or one more than this radix when diﬀerent keys may have diﬀerent length) results in a fast search algorithm. However, this node structure is often wasteful of space because many of the child ﬁelds are null. A radix r trie for d digit keys requires O(rdn) child ﬁelds, where n is the number of elements in the trie. To see this, notice that in a d digit trie with n information nodes, each information node may have at most d ancestors, each of which is a branch node. Therefore, the number of branch nodes is at most dn. (Actually, we cannot have this many branch nodes, because the information nodes have common ancestors like the root node.) We can reduce the space requirements, at the expense of increased search time, by changing the node structure. For example, each branch node of a trie could be replaced by any of the following: 1. A chain of nodes, each node having the three ﬁelds digitV alue, child, next. Node A of Figure 28.1, for example, would be replaced by the chain shown in Figure 28.2. The space required by a branch node changes from that required for r children/pointer/reference ﬁelds to that required for 2p pointer ﬁelds and p digit value ﬁelds, where p is the number of children ﬁelds in the branch node that are not null. Under the assumption that pointer ﬁelds and digit value ﬁelds are of the same size, a reduction in space is realized when more than two-thirds of the children ﬁelds in branch nodes are null. In the worst case, almost all the branch nodes have only 1 ﬁeld that is not null and the space savings become almost (1 − 3/r) ∗ 100%. 2. A (balanced) binary search tree in which each node has a digit value and a pointer to the subtrie for that digit value. Figure 28.3 shows the binary search tree for node A of Figure 28.1. Under the assumption that digit values and pointers take the same amount of space, the binary search tree representation requires space for 4p ﬁelds per branch node, because each search tree node has ﬁelds for a digit value, a subtrie pointer, a left child pointer, and a right child pointer. The binary search tree representation of a branch node saves us space when more than three-fourths of the children ﬁelds in branch nodes are null. Note that for large r, the binary search tree is

© 2005 by Chapman & Hall/CRC

Tries

28-5

2,B 9,D FIGURE 28.3: Binary search tree for node A of Figure 28.1. 0 1

0010 = 2

1001 = 9

FIGURE 28.4: Binary trie for node A of Figure 28.1. Node Number

A 10

B 11

C 0

D 12

E 13

F 14

G 1

H 2

I 15

J 3

K 4

FIGURE 28.5: Number assignment to nodes of trie of Figure 28.1. faster to search than the chain described above. 3. A binary trie (i.e., a trie with radix 2). Figure 28.4 shows the binary trie for node A of Figure 28.1. The space required by a branch node represented as a binary trie is at most (2 ∗ log2 r + 1)p. 4. A hash table. When a hash table with a suﬃciently small loading density is used, the expected time performance is about the same as when the node structure of Figure 1 is used. Since we expect the fraction of null child ﬁelds in a branch node to vary from node to node and also to increase as we go down the trie, maximum space eﬃciency is obtained by consolidating all of the branch nodes into a single hash table. To accomplish this, each node in the trie is assigned a number, and each parent to child pointer is replaced by a triple of the form (currentN ode, digitV alue, childN ode). The numbering scheme for nodes is chosen so as to easily distinguish between branch and information nodes. For example, if we expect to have at most 100 elements in the trie at any time, the numbers 0 through 99 are reserved for information nodes and the numbers 100 on up are used for branch nodes. The information nodes are themselves represented as an array inf ormation[100]. (An alternative scheme is to represent pointers as tuples of the form (currentN ode, digitV alue, childN ode, childN odeIsBranchN ode), where childN odeIsBranchN ode = true iﬀ the child node is a branch node.) Suppose that the nodes of the trie of Figure 28.1 are assigned numbers as given in Figure 28.5. This number assignment assumes that the trie will have no more than 10 elements. The pointers in node A are represented by the tuples (10, 2, 11), (10, 5, 0), and (10, 9, 12). The pointers in node E are represented by the tuples (13, 1, 1) and (13, 8, 2). The pointer triples are stored in a hash table using the ﬁrst two ﬁelds (i.e., the

© 2005 by Chapman & Hall/CRC

28-6

Handbook of Data Structures and Applications currentN ode and digitV alue) as the key. For this purpose, we may transform the two ﬁeld key into an integer using the formula currentN ode ∗ r + digitV alue, where r is the trie radix, and use the division method to hash the transformed key into a home bucket. The data presently in information node i is stored in inf ormation[i]. To see how all this works, suppose we have set up the trie of Figure 28.1 using the hash table scheme just described. Consider searching for an element with key 278-49-1515. We begin with the knowledge that the root node is assigned the number 10. Since the ﬁrst digit of the search key is 2, we query our hash table for a pointer triple with key (10, 2). The hash table search is successful and the triple (10, 2, 11) is retrieved. The childN ode component of this triple is 11, and since all information nodes have a number 9 or less, the child node is determined to be a branch node. We make a move to the branch node 11. To move to the next level of the trie, we use the second digit 7 of the search key. For the move, we query the hash table for a pointer with key (11, 7). Once again, the search is successful and the triple (11, 7, 13) is retrieved. The next query to the hash table is for a triple with key (13, 8). This time, we obtain the triple (13, 8, 2). Since childN ode = 2 < 10, we know that the pointer gets us to an information node. So, we compare the search key with the key of the element inf ormation[2]. The keys match, and we have found the element we were looking for. When searching for an element with key 322-167-8976, the ﬁrst query is for a triple with key (10, 3). The hash table has no triple with this key, and we conclude that the trie has no element whose key equals the search key. The space needed for each pointer triple is about the same as that needed for each node in the chain of nodes representation of a trie node. Therefore, if we use a linear open addressed hash table with a loading density of α, the hash table scheme will take approximately (1/α − 1) ∗ 100% more space than required by the chain of nodes scheme. However, when the hash table scheme is used, we can retrieve a pointer in O(1) expected time, whereas the time to retrieve a pointer using the chain of nodes scheme is O(r). When the (balanced) binary search tree or binary trie schemes are used, it takes O(log r) time to retrieve a pointer. For large radixes, the hash table scheme provides signiﬁcant space saving over the scheme of Figure 28.1 and results in a small constant factor degradation in the expected time required to perform a search. The hash table scheme actually reduces the expected time to insert elements into a trie, because when the node structure of Figure 28.1 is used, we must spend O(r) time to initialize each new branch node (see the description of the insert operation below). However, when a hash table is used, the insertion time is independent of the trie radix. To support the removal of elements from a trie represented as a hash table, we must be able to reuse information nodes. This reuse is accomplished by setting up an available space list of information nodes that are currently not in use.

Andersson and Nilsson [1] propose a trie representation in which nodes have a variable degree. Their data structure, called LC-tries (level-compressed tries), is obtained from a binary trie by replacing full subtries of the binary trie by single node whose degree is 2i , where i is the number of levels in the replaced full subtrie. This replacement is done by examining the binary trie from top to bottom (i.e., from root to leaves).

© 2005 by Chapman & Hall/CRC

Tries

28-7 0 1 2 3 4 5 6 7 8 9 A

5

7 B

C 562-44-2169

1

D

8

1

E

F

2

1 L

0

H 278-49-1515

6

M

N 271-10-2529

9

I

J 951-23-7625

K 951-94-1654

G 271-16-3624

FIGURE 28.6: Trie of Figure 28.1 with 271-10-2529 inserted.

28.6

Inserting into a Trie

To insert an element theElement whose key is theKey, we ﬁrst search the trie for an existing element with this key. If the trie contains such an element, then we replace the existing element with theElement. When the trie contains no element whose key equals theKey, theElement is inserted into the trie using the following procedure. Case 1 For Insert Procedure

If the search for theKey ended at an element node X, then the key of the element in X and theKey are used to construct a subtrie to replace X. Suppose we are to insert an element with key 271-10-2529 into the trie of Figure 28.1. The search for the key 271-10-2529 terminates at node G and we determine that the key, 271-16-3624, of the element in node G is not equal to the key of the element to be inserted. Since the ﬁrst three digits of the keys are used to get as far as node E of the trie, we set up branch nodes for the fourth digit (from the left) onwards until we reach the ﬁrst digit at which the two keys diﬀer. This results in branch nodes for the fourth and ﬁfth digits followed by element nodes for each of the two elements. Figure 28.6 shows the resulting trie. Case 2 For Insert Procedure

If the search for theKey ends by falling oﬀ the trie from the branch node X, then we simply add a child (which is an element node) to the node X. The added element node contains theElement. Suppose we are to insert an element with key 987-33-1122 to the trie of Figure 28.1. The search for an element with key equal to 987-33-1122 ends when we fall oﬀ the trie while following the pointer D.child[8]. We replace the null pointer D.child[8] with a pointer to a new element node that contains theElement, as is shown in Figure 28.7. The time required to insert an element with a d digit key into a radix r trie is O(dr) because the insertion may require us to create O(d) branch nodes and it takes O(r) time to initialize the children pointers in a branch node.

© 2005 by Chapman & Hall/CRC

28-8

Handbook of Data Structures and Applications 0 1 2 3 4 5 6 7 8 9 A

5

7 B

C 562-44-2169

1

8

D

8

1

E

F

2 G 271-16-3624

278-49-1515 H

L 987-33-1122

9

I

J 951-23-7625

K 951-94-1654

FIGURE 28.7: Trie of Figure 28.1 with 987-33-1122 inserted. 0 1 2 3 4 5 6 7 8 9 A

5

7 B

C 562-44-2169

1

8

D

8

E

K 951-94-1654

G 271-16-3624

L 987-33-1122

H 278-49-1515

FIGURE 28.8: Trie of Figure 28.7 with 951-23-7635 removed.

28.7

Removing an Element

To remove the element whose key is theKey, we ﬁrst search for the element with this key. If there is no matching element in the trie, nothing is to be done. So, assume that the trie contains an element theElement whose key is theKey. The element node X that contains theElement is discarded, and we retrace the path from X to the root discarding branch nodes that are roots of subtries that have only 1 element in them. This path retracing stops when we either reach a branch node that is not discarded or we discard the root. Consider the trie of Figure 28.7. When the element with key 951-23-7625 is removed, the element node J is discarded and we follow the path from node J to the root node A. The branch node I is discarded because the subtrie with root I contains the single element node K. We next reach the branch node F . This node is also discarded, and we proceed to the branch node D. Since the subtrie rooted at D has 2 element nodes (K and L), this branch node is not discarded. Instead, node K is made a child of this branch node, as is shown in Figure 28.8. To remove the element with key 562-44-2169 from the trie of Figure 28.8, we discard the element node C. Since its parent node remains the root of a subtrie that has more than one element, the parent node is not discarded and the removal operation is complete. Figure 28.9 show the resulting trie. The time required to remove an element with a d digit key from a radix r trie is O(dr)

© 2005 by Chapman & Hall/CRC

Tries

28-9 0 1 2 3 4 5 6 7 8 9 A

5

7 B

8

D

1

8

E

K 951-94-1654

G 271-16-3624

L 987-33-1122

H 278-49-1515

FIGURE 28.9: Trie of Figure 28.8 with 562-44-2169 removed. ps2ascii ps2epsi ps2frag ps2gif

TABLE 28.2

ps2pdf ps2pk ps2ps psbb

psbook pscal psidtopgm pslatex

psmandup psmerge psnup psresize

psselect pstopnm pstops pstruct

Commands that begin with ”ps”

because the removal may require us to discard O(d) branch nodes and it takes O(r) time to determine whether a branch node is to be discarded. The complexity of the remove operation can be reduced to O(r + d) by adding a numberOf ElementsInSubtrie ﬁeld to each branch node.

28.8

Preﬁx Search and Applications

You have probably realized that to search a trie we do not need the entire key. Most of the time, only the ﬁrst few digits (i.e., a preﬁx) of the key is needed. For example, our search of the trie of Figure 28.1 for an element with key 951-23-7625 used only the ﬁrst four digits of the key. The ability to search a trie using only the preﬁx of a key enables us to use tries in applications where only the preﬁx might be known or where we might desire the user to provide only a preﬁx. Some of these applications are described below. Criminology

Suppose that you are at the scene of a crime and observe the ﬁrst few characters CRX on the registration plate of the getaway car. If we have a trie of registration numbers, we can use the characters CRX to reach a subtrie that contains all registration numbers that begin with CRX. The elements in this subtrie can then be examined to see which cars satisfy other properties that might have been observed. Automatic Command Completion

When using an operating system such as Unix or DOS, we type in system commands to accomplish certain tasks. For example, the Unix and DOS command cd may be used to change the current directory. Table 28.2 gives a list of commands that have the preﬁx ps (this list was obtained by executing the command ls/usr/local/bin/ps∗ on a Unix system). We can simply the task of typing in commands by providing a command completion facility which automatically types in the command suﬃx once the user has typed in a long

© 2005 by Chapman & Hall/CRC

28-10

Handbook of Data Structures and Applications

enough preﬁx to uniquely identify the command. For instance, once the letters psi have been entered, we know that the command must be psidtopgm because there is only one command that has the preﬁx psi. In this case, we replace the need to type in a 9 character command name by the need to type in just the ﬁrst 3 characters of the command! A command completion system is easily implemented when the commands are stored in a trie using ASCII characters as the digits. As the user types the command digits from left to right, we move down the trie. The command may be completed as soon as we reach an element node. If we fall oﬀ the trie in the process, the user can be informed that no command with the typed preﬁx exists. Although we have described command completion in the context of operating system commands, the facilty is useful in other environments: 1. A network browser keeps a history of the URLs of sites that you have visited. By organizing this history as a trie, the user need only type the preﬁx of a previously used URL and the browser can complete the URL. 2. A word processor can maintain a dictionary of words and can complete words as you type the text. Words can be completed as soon as you have typed a long enough preﬁx to identify the word uniquely. 3. An automatic phone dialer can maintain a list of frequently called telephone numbers as a trie. Once you have punched in a long enough preﬁx to uniquely identify the phone number, the dialer can complete the call for you.

28.9

Compressed Tries

Take a close look at the trie of Figure 28.1. This trie has a few branch nodes (nodes B, D, and F ) that do not partition the elements in their subtrie into two or more nonempty groups. We often can improve both the time and space performance metrics of a trie by eliminating all branch nodes that have only one child. The resulting trie is called a compressed trie. When branch nodes with a single child are removed from a trie, we need to keep additional information so that dictionary operations may be performed correctly. The additional information stored in three compressed trie structures is described below.

28.9.1

Compressed Tries with Digit Numbers

In a compressed trie with digit numbers, each branch node has an additional ﬁeld digitN umber that tells us which digit of the key is used to branch at this node. Figure 11 shows the compressed trie with digit numbers that corresponds to the trie of Figure 28.1. The leftmost ﬁeld of each branch node of Figure 28.10 is the digitN umber ﬁeld. Searching a Compressed Trie with Digit Numbers

A compressed trie with digit numbers may be searched by following a path from the root. At each branch node, the digit, of the search key, given in the branch node’s digitN umber ﬁeld is used to determine which subtrie to move to. For example, when searching the trie of Figure 28.10 for an element with key 951-23-7625, we start at the root of the trie. Since the root node is a branch node with digitN umber = 1, we use the ﬁrst digit 9 of the search key to determine which subtrie to move to. A move to node A.child[9] = I is made. Since I.digitN umber = 4, the fourth digit, 2, of the search key tells us which subtrie to move to. A move is now made to node I.child[2] = J. We are now

© 2005 by Chapman & Hall/CRC

Tries

28-11 0 1 2 3 4 5 6 7 8 9 A 1

1

8

2

E 3

C 562-44-2169

G 271-16-3624

H 278-49-1515

9

I 4

J 951-23-7625

K 951-94-1654

FIGURE 28.10: Compressed trie with digit numbers. 0 1 2 3 4 5 6 7 8 9 A 1

1 E 3

8

5 C 562-44-2169

2 G 271-16-3624

H 278-49-1515

8

L 2

9

I 4

J 951-23-7625

M 987-26-1615

K 951-94-1654

FIGURE 28.11: Compressed trie following the insertion of 987-26-1615 into the compressed trie of Figure 28.10. at an element node, and the search key is compared with the key of the element in node J. Since the keys match, we have found the desired element. Notice that a search for an element with key 913-23-7625 also terminates at node J. However, the search key and the element key at node J do not match and we conclude that the trie contains no element with key 913-23-7625. Inserting into a Compressed Trie with Digit Numbers

To insert an element with key 987-26-1615 into the trie of Figure 28.10, we ﬁrst search for an element with this key. The search ends at node J. Since the search key and the key, 951-23-7625, of the element in this node do not match, we conclude that the trie has no element whose key matches the search key. To insert the new element, we ﬁnd the ﬁrst digit where the search key diﬀers from the key in node J and create a branch node for this digit. Since the ﬁrst digit where the search key 987-26-1615 and the element key 951-237625 diﬀer is the second digit, we create a branch node with digitN umber = 2. Since digit values increase as we go down the trie, the proper place to insert the new branch node can be determined by retracing the path from the root to node J and stopping as soon as either a node with digit value greater than 2 or the node J is reached. In the trie of Figure 28.10, this path retracing stops at node I. The new branch node is made the parent of node I, and we get the trie of Figure 28.11. Consider inserting an element with key 958-36-4194 into the compressed trie of Figure 28.10. The search for an element with this key terminates when we fall of the trie by following the pointer I.child[3] = null. To complete the insertion, we must ﬁrst ﬁnd an element in the subtrie rooted at node I. This element is found by following a downward path from node I using (say) the ﬁrst non null link in each branch node encountered. Doing

© 2005 by Chapman & Hall/CRC

28-12

Handbook of Data Structures and Applications 0 1 2 3 4 5 6 7 8 9 A 1

1

8

1

E 3

C 562-44-2169

2 G 271-16-3624

H 278-49-1515

8

L 3

9

I 4

M 958-36-4194

J 951-23-7625

K 951-94-1654

FIGURE 28.12: Compressed trie following the insertion of 958-36-4194 into the compressed trie of Figure 28.10. 0 1 2 3 4 5 6 7 8 9 A 1

1 E 3

G 271-16-3624

8

1 C 562-44-2169

H 278-49-1515

8

L 3

J 951-23-7625

M 958-36-4194

FIGURE 28.13: Compressed trie following the removal of 951-94-1654 from the compressed trie of Figure 28.12. this on the compressed trie of Figure 28.10, leads us to node J. Having reached an element node, we ﬁnd the ﬁrst digit where the element key and the search key diﬀer and complete the insertion as in the previous example. Figure 28.12 shows the resulting compressed trie. Because of the possible need to search for the ﬁrst non null child pointer in each branch node, the time required to insert an element into a compressed tries with digit numbers is O(rd), where r is the trie radix and d is the maximum number of digits in any key. Removing an Element from a Compressed Trie with Digit Numbers

To remove an element whose key is theKey, we do the following: 1. Find the element node X that contains the element whose key is theKey. 2. Discard node X. 3. If the parent of X is left with only one child, discard the parent node also. When the parent of X is discarded, the sole remaining child of the parent of X becomes a child of the grandparent (if any) of X. To remove the element with key 951-94-1654 from the compressed trie of Figure 28.12, we ﬁrst locate the node K that contains the element that is to be removed. When this node is discarded, the parent I of K is left with only one child. Consequently, node I is also discarded, and the only remaining child J of node I is the made a child of the grandparent of K. Figure 28.13 shows the resulting compressed trie. Because of the need to determine whether a branch node is left with two or more children, removing a d digit element from a radix r trie takes O(d + r) time.

© 2005 by Chapman & Hall/CRC

Tries

28-13 0 1 2 3 4 5 6 7 8 9 A 0

1

8

E 1

2 C 562-44-2169

G 271-16-3624

H 278-49-1515

9

I 2

J 951-23-7625

K 951-94-1654

FIGURE 28.14: Compressed trie with skip ﬁelds. 0 1 2 3 4 5 6 7 8 9 A C 0

1

8

E G1

2 C 562-44-2169

G 271-16-3624

H 278-49-1515

9

I J 2

J 951-23-7625

K 951-94-1654

FIGURE 28.15: Compressed trie with edge information.

28.9.2

Compressed Tries with Skip Fields

In a compressed trie with skip ﬁelds, each branch node has an additional ﬁeld skip which tells us the number of branch nodes that were originally between the current branch node and its parent. Figure 15 shows the compressed trie with skip ﬁelds that corresponds to the trie of Figure 28.1. The leftmost ﬁeld of each branch node of Figure 28.14 is the skip ﬁeld. The algorithms to search, insert, and remove are very similar to those used for a compressed trie with digit numbers.

28.9.3

Compressed Tries with Edge Information

In a compressed trie with edge information, each branch node has the following additional information associated with it: a pointer/reference element to an element (or element node) in the subtrie, and an integer skip which equals the number of branch nodes eliminated between this branch node and its parent. Figure 28.15 shows the compressed trie with edge information that corresponds to the trie of Figure 28.1. The ﬁrst ﬁeld of each branch node is its element ﬁeld, and the second ﬁeld is the skip ﬁeld. Even though we store the “edge information” with branch nodes, it is convenient to think of this information as being associated with the edge that comes into the branch node from its parent (when the branch node is not the root). When moving down a trie, we follow edges, and when an edge is followed. we skip over the number of digits given by the skip ﬁeld of the edge information. The value of the digits that are skipped over may be determined by using the element ﬁeld. When moving from node A to node I of the compressed trie of Figure 28.15, we use digit 1 of the key to determine which child ﬁeld of A is to be used. Also, we skip over the next 2 digits, that is, digits 2 and 3, of the keys of the elements in the subtrie rooted at

© 2005 by Chapman & Hall/CRC

28-14

Handbook of Data Structures and Applications 0 1 2 3 4 5 6 7 8 9 A C 0

1 E G1

8

5 C 562-44-2169

2 G 271-16-3624

H 278-49-1515

8

L M0

I J 1

J 951-23-7625

9 M 987-26-1615

K 951-94-1654

FIGURE 28.16: Compressed trie following the insertion of 987-26-1615 into the compressed trie of Figure 28.15.

I. Since all elements in the subtrie I have the same value for the digits that are skipped over, we can determine the value of these skipped over digits from any of the elements in the subtrie. Using the element ﬁeld of the edge information, we access the element node J, and determine that the digits that are skipped over are 5 and 1. Searching a Compressed Trie with Edge Information

When searching a compressed trie with edge information, we can use the edge information to terminate unsuccessful searches (possibly) before we reach an element node or fall oﬀ the trie. As in the other compressed trie variants, the search is done by following a path from the root. Suppose we are searching the compressed trie of Figure 28.15 for an element with key 921-23-1234. Since the skip value for the root node is 0, we use the ﬁrst digit 9 of the search key to determine which subtrie to move to. A move to node A.child[9] = I is made. By examining the edge information (stored in node I), we determine that, in making the move from node A to node I, the digits 5 and 1 are skipped. Since these digits do not agree with the next two digits of the search key, the search terminates with the conclusion that the trie contains no element whose key equals the search key. Inserting into a Compressed Trie with Edge Information

To insert an element with key 987-26-1615 into the compressed trie of Figure 28.15, we ﬁrst search for an element with this key. The search terminates unsuccessfully when we move from node A to node I because of a mismatch between the skipped over digits and the corresponding digits of the search key. The ﬁrst mismatch is at the ﬁrst skipped over digit. Therefore, we insert a branch node L between nodes A and I. The skip value for this branch node is 0, and its element ﬁeld is set to reference the element node for the newly inserted element. We must also change the skip value of I to 1. Figure 28.16 shows the resulting compressed trie. Suppose we are to insert an element with key 958-36-4194 into the compressed trie of Figure 16. The search for an element with this key terminates when we move to node I because of a mismatch between the digits that are skipped over and the corresponding digits of the search key. A new branch node is inserted between nodes A and I and we get the compressed trie that is shown in Figure 28.17. The time required to insert a d digit element into a radix r compressed trie with edge information is O(r + d).

© 2005 by Chapman & Hall/CRC

Tries

28-15 0 1 2 3 4 5 6 7 8 9 A C 0

1 E G1

8

1 C 562-44-2169

2 G 271-16-3624

8

L M1

9

H 278-49-1515 I J 0

J 951-23-7625

M 958-36-4194

K 951-94-1654

FIGURE 28.17: Compressed trie following the insertion of 958-36-4194 into the compressed trie of Figure 28.15. Removing an Element from a Compressed Trie with Edge Information

This is similar to removal from a compressed trie with digit numbers except for the need to update the element ﬁelds of branch nodes whose element ﬁeld references the removed element.

28.9.4

Space Required by a Compressed Trie

Since each branch node partitions the elements in its subtrie into two or more nonempty groups, an n element compressed trie has at most n − 1 branch nodes. Therefore, the space required by each of the compressed trie variants described by us is O(nr), where r is the trie radix. When compressed tries are represented as hash tables, we need an additional data structure to store the nonpointer ﬁelds of branch nodes. We may use an array (much like we use the array inf ormation) for this purpose.

28.10

Patricia

The data structure Patricia (Practical Algorithm To Retrieve Information Coded In Alphanumeric) is a compressed binary trie in which the branch and element nodes have been melded into a single node type. Consider the compressed binary trie of Figure 28.18. Circular nodes are branch nodes and rectangular nodes are element nodes. The number inside a branch node is its bit number ﬁeld; the left child of a branch node corresponds to the case when the appropriate key bit is 0 and the right child to the case when this bit is 1. The melding of branch and element nodes is done by moving each element from its element node to an ancestor branch node. Since the number of branch nodes is one less than the number of element nodes, we introduce a header node and make the compressed binary trie the left subtree of the header. Pointers that originally went from a branch node to an element node now go from that branch node to the branch node into which the corresponding element has been melded. Figure 28.19 shows a possible result of melding the nodes of Figure 28.18. The number outside a node is its bit number values. The thick pointers are backward pointers that replace branch-node to element-node pointers in Figure 28.18. A backward pointer has the property that the bit number value at the start of the pointer is ≥ the bit number value at its end. For original branch-node to branch-node pointers (also called downward pointers), the bit number value at the pointer end is always greater than the bit number value at the pointer start.

© 2005 by Chapman & Hall/CRC

28-16

Handbook of Data Structures and Applications 1 0

1

3 0001

2 0011

4 1000

4 1001

1100

1101

FIGURE 28.18: A compressed binary trie. 0 0001 1 1101 3 0011

2 1001 4 1000

4 1100

FIGURE 28.19: A Patricia instance that corresponds to Figure 28.18.

28.10.1

Searching

To search for an element with key theKey, we use the bits of theKey from left to right to move down the Patricia instance just as we would search a compressed binary trie. When a backward pointer is followed, we compare theKey with the key in the reached Patricia node. For example, to search for theKey = 1101, we start by moving into the left subtree of the header node. The pointer that is followed is a downward pointer (start bit number is 0 and end bit number is 1). We branch using bit 1 of theKey. Since this bit is 1, we follow the right child pointer. The start bit number for this pointer is 1 and the end bit number is 2. So, again, a downward pointer has been followed. The bit number for the reached node is 2. So, we use bit 2 of theKey to move further. Bit 2 is a 1. So, we use the right child pointer to get to the node that contains 1100. Again, a downward pointer was used. From this node, a move is made using bit 4 of theKey. This gets us to the node that contains 1101. This time, a backward pointer was followed (start bit of pointer is 4 and end bit is 1). When a backward pointer is followed, we compare theKey with the key in the reached node. In this case, the keys match and we have found the desired element. Notice that the same search path is taken when theKey = 1111. In this case, the ﬁnal compare fails and we conclude that we have no element whose key is 1111.

28.10.2

Inserting an Element

We use an example to illustrate the insert algorithm. We start with an empty instance. Such an instance has no node; not even the header. For our example, we will consider keys that have 7 bits. For the ﬁrst insert, we use the key 0000101. When inserting into an empty instance, we create a header node whose left child pointer points to the header node; the new element is inserted into the header; and the bit number ﬁeld of the header set to 0.

© 2005 by Chapman & Hall/CRC

Tries

28-17

0 0000101 0

5 0000101

0000000

(a) Insert 0000101

(b) Insert 0000000

0 0000101 5 0000000 6 0000010

(c) Insert 0000010

0 0000101 4 0001000 5 0000000 6 0000010

(d) Insert 0001000

FIGURE 28.20: Insertion example. The conﬁguration of Figure 28.20(a) results. Note that the right child ﬁeld of the header node is not used. The key for the next insert is 0000000. The search for this key terminates at the header. We compare the insert key and the header key and determine that the ﬁrst bit at which they diﬀer is bit 5. So, we create a new node with bit number ﬁeld 5 and insert the new element

© 2005 by Chapman & Hall/CRC

28-18

Handbook of Data Structures and Applications

into this node. Since bit 5 of the insert key is 0, the left child pointer of the new node points to the new node and the right child pointer to the header node (Figure 28.20(b)). For the next insertion, assume that the key is 0000010. The search for this key terminates at the node with 0000000. Comparing the two keys, we determine that the ﬁrst bit at which the two keys diﬀer is bit 6. So, we create a new node with bit number ﬁeld 6 and put the new element into this new node. The new node is inserted into the search path in such a way that bit number ﬁelds increase along this path. For our example, the new node is inserted as the left child of the node with 0000000. Since bit 6 of the insert key is 1, the right child pointer of the new node is a self pointer and the left child pointer points to the node with 0000000. Figure 28.20(c) shows the result. The general strategy to insert an element other than the ﬁrst one is given below. The key of the element to be inserted is theKey. 1. Search for theKey. Let reachedKey be the key in the node endN ode where the search terminates. 2. Determine the leftmost bit position lBitP os at which theKey and reachedKey diﬀer. lBitP os is well deﬁned so long as one of the two keys isn’t a preﬁx of the other. 3. Create a new node with bit number ﬁeld lBitP os. Insert this node into the search path from the header to endN ode so that bit numbers increase along this path. This insertion breaks a pointer from node p to node q. The pointer now goes from p to the new node. 4. If bit lBitP os of theKey is 1, the right child pointer of the new node becomes a self pointer (i.e., it points to the new node); otherwise, the left child pointer of the new node becomes a self pointer. The remaining child pointer of the new node points to q. For our next insert, the insert key is 0001000. The search for this key terminates at the node with 0000000. We determine that the ﬁrst bit at which the insert key and reachedKey = 0000000 diﬀer is bit 4. We create a new node with bit number 4 and put the new element into this node. The new node is inserted on the search path so as to ensure that bit number ﬁelds increase along this path. So, the new node is inserted as the left child of the header node (Figure 28.18(d)). This breaks the pointer from the header to the node q with 0000000. Since bit 4 of the insert key is 1, the right child pointer of the new node is a self pointer and the left child pointer goes to node q. We consider two more inserts. Consider inserting an element whose key is 0000100. The reached key is 0000101 (in the header). We see that the ﬁrst bit at which the insert and reached keys diﬀer is bit 7. So, we create a new node with bit number 7; the new element is put into the new node; the new node is inserted into the search path so as to ensure that bit numbers increase along this path (this requires the new node to be made a right child of the node with 0000000, breaking the child pointer from 0000000 to the header); for the broken pointer, p is the node with 0000000 and q is the header; the left child pointer of the new node is a self pointer (because bit 7 of the insert key is 0); and remaining child pointer (in this case the right child) of the new node points to q (see Figure 28.21(a)). For our ﬁnal insert, the insert key is 0001010. A search for this key terminates at the node with 0000100. The ﬁrst bit at which the insert and reached keys diﬀer is bit 6. So, we create a new node with bit number 6; the new element is put into the new node; the new node is inserted into the search path so as to ensure that bit numbers increase along this path (this requires the new node to be made a right child of the node with 0001000; so, p = q = node with 001000); the right child pointer of the new node is a self pointer (because

© 2005 by Chapman & Hall/CRC

Tries

28-19

0 0000101 4 0001000 5 0000000 6

7 0000010

0000100

(a) Insert 0000100

0 0000101 4 0001000 5

6 0000000

0001010

6

7 0000010

0000100

(b) Insert 0001010

FIGURE 28.21: Insertion example. bit 6 of the insert key is 1); and the remaining child (in this case the left child) of the new node is q (see Figure 28.21(b)).

28.10.3

Removing an Element

Let p be the node that contains the element that is to be removed. We consider two cases for p—(a) p has a self pointer and (b) p has no self pointer. When p has a self pointer and p is the header, the Patricia instance becomes empty following the element removal (Figure 28.20(a)). In this case, we simply dispose of the header. When p has a self pointer and p is not the header, we set the pointer from the parent of p to the value of p’s non-self pointer. Following this pointer change, the node p is disposed. For example, to remove the element with key 0000010 from Figure 28.21(a), we change the left child pointer in the node

© 2005 by Chapman & Hall/CRC

28-20

Handbook of Data Structures and Applications

with 0000000 to point to the node pointed at by p’s non-self pointer (i.e., the node with 0000000). This causes the left child pointer of 0000000 to become a self pointer. The node with 0000010 is then disposed. For the second case, we ﬁrst ﬁnd the node q that has a backward pointer to node p. For example, when we are to remove 0001000 from Figure 28.21(b), the node q is the node with 0001010. The element qElement in q (in our example, 0001010) is moved to node p and we proceed to delete node q instead of node p. Notice that node q is the node from which we reached node p in the search for the element that is to be removed. To delete node q, we ﬁrst ﬁnd the node r that has a back pointer to q (for our example r = q). The node r is found by using the key of qElement. Once r is found, the back pointer to q that is in r is changed from q to p to properly account for the fact that we have moved qElement to p. Finally, the downward pointer from the parent of q to q is changed to q’s child pointer that was used to locate r. In our example p is the parent of q and the right child pointer of p is changed from q to the right child of q, which itself was just changed to p. We see that the time for each of the Patricia operations search, insert, and delete is O(h), where h is the height of the Patricia instance. For more information on Patricia and general tries, see [2, 3].

Acknowledgment This work was supported, in part, by the National Science Foundation under grant CCR9912395.

References [1] A. Andersson and S. Nillson, Improved behavior of tries by adaptive branching, Information Processing Letters, 46, 1993, 295-300. [2] E. Horowitz, S. Sahni, and D. Mehta, Fundamentals of Data Structures in C++, Computer Science Press, 1995. [3] D. Knuth, The Art of Computer Programming: Sorting and Searching, Second Edition, Addison-Wesley, 1998.

© 2005 by Chapman & Hall/CRC

29 Suﬃx Trees and Suﬃx Arrays 29.1 29.2

Basic Deﬁnitions and Properties . . . . . . . . . . . . . . . . . Linear Time Construction Algorithms . . . . . . . . . .

29-1 29-4

Suﬃx Trees vs. Suﬃx Arrays • Linear Time Construction of Suﬃx Trees • Linear Time Construction of Suﬃx Arrays • Space Issues

29.3

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-11 Pattern Matching • Longest Common Substrings Text Compression • String Containment • Suﬃx-Preﬁx Overlaps

29.4 29.5

Srinivas Aluru Iowa State University

29.1

•

Lowest Common Ancestors . . . . . . . . . . . . . . . . . . . . . . . 29-17 Advanced Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-18 Suﬃx Links from Lowest Common Ancestors Approximate Pattern Matching • Maximal Palindromes

•

Basic Deﬁnitions and Properties

Suﬃx trees and suﬃx arrays are versatile data structures fundamental to string processing applications. Let s denote a string over the alphabet Σ. Let $ ∈ / Σ be a unique termination character, and s = s $ be the string resulting from appending $ to s . We use the following notation: |s| denotes the size of s, s[i] denotes the ith character of s, and s[i..j] denotes the substring s[i]s[i + 1] . . . s[j]. Let suf fi = s[i]s[i + 1] . . . s[|s|] be the suﬃx of s starting at ith position. The suﬃx tree of s, denoted ST (s) or simply ST , is a compacted trie (See Chapter 28) of all suﬃxes of string s. Let |s| = n. It has the following properties: 1. 2. 3. 4. 5.

The tree has n leaves, labeled 1 . . . n, one corresponding to each suﬃx of s. Each internal node has at least 2 children. Each edge in the tree is labeled with a substring of s. The concatenation of edge labels from the root to the leaf labeled i is suf fi . The labels of the edges connecting a node with its children start with diﬀerent characters.

The paths from root to the suﬃxes labeled i and j coincide up to their longest common preﬁx, at which point they bifurcate. If a suﬃx of the string is a preﬁx of another longer suﬃx, the shorter suﬃx must end in an internal node instead of a leaf, as desired. It is to avoid this possibility that the unique termination character is added to the end of the string. Keeping this in mind, we use the notation ST (s ) to denote the suﬃx tree of the string obtained by appending $ to s .

29-1

© 2005 by Chapman & Hall/CRC

29-2

Handbook of Data Structures and Applications $

12

r

$

11

$

i

s s i

p

8

p

x

p $

m i s s i s s i p p i $

u p

i s s i p p i $

i

5

s

p

i

w

v p i $

i $ 10

s

i

i

y

z

9 s s i

p p

p p

p p i

i $

s s i p p i

i $

$

$ 1

7

4

6

3

2

SA

12

11

8

5

2

1

10

9

7

4

6

Lcp

0

1

1

4

0

0

1

0

2

1

3

3

FIGURE 29.1: Suﬃx tree, suﬃx array and Lcp array of the string mississippi. The suﬃx links in the tree are given by x → z → y → u → r, v → r, and w → r. As each internal node has at least 2 children, an n-leaf suﬃx tree has at most n − 1 internal nodes. Because of property (5), the maximum number of children per node is bounded by |Σ| + 1. Except for the edge labels, the size of the tree is O(n). In order to allow a linear space representation of the tree, each edge label is represented by a pair of integers denoting the starting and ending positions, respectively, of the substring describing the edge label. If the edge label corresponds to a repeat substring, the indices corresponding to any occurrence of the substring may be used. The suﬃx tree of the string mississippi is shown in Figure 29.1. For convenience of understanding, we show the actual edge labels. The suﬃx array of s = s $, denoted SA(s) or simply SA, is a lexicographically sorted array of all suﬃxes of s. Each suﬃx is represented by its starting position in s. SA[i] = j iﬀ Suf fj is the ith lexicographically smallest suﬃx of s. The suﬃx array is often used in conjunction with an array termed Lcp array, containing the lengths of the longest common preﬁxes between every consecutive pair of suﬃxes in SA. We use lcp(α, β) to denote the longest common preﬁx between strings α and β. We also use the term lcp as an abbreviation for the term longest common preﬁx. Lcp[i] contains the length of the lcp between suf fSA[i] and suf fSA[i+1] , i.e., Lcp[i] = lcp(suf fSA[i] , suf fSA[i+1]). As with suﬃx trees, we use the notation SA(s ) to denote the suﬃx array of the string obtained by appending $ to s . The suﬃx and Lcp arrays of the string mississippi are shown in Figure 29.1. Let v be a node in the suﬃx tree. Let path-label(v) denote the concatenation of edge

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-3

labels along the path from root to node v. Let string-depth(v) denote the length of pathlabel(v). To diﬀerentiate this with the usual notion of depth, we use the term tree-depth of a node to denote the number of edges on the path from root to the node. Note that the length of the longest common preﬁx between two suﬃxes is the string depth of the lowest common ancestor of the leaf nodes corresponding to the suﬃxes. A repeat substring of string S is right-maximal if there are two occurrences of the substring that are succeeded by diﬀerent characters in the string. The path label of each internal node in the suﬃx tree corresponds to a right-maximal repeat substring and vice versa. Let v be an internal node in the suﬃx tree with path-label cα where c is a character and α is a (possibly empty) string. Therefore, cα is a right-maximal repeat, which also implies that α is also a right maximal repeat. Let u be the internal node with path label α. A pointer from node v to node u is called a suﬃx link; we denote this by SL(v) = u. Each suﬃx suf fi in the subtree of v shares the common preﬁx cα. The corresponding suﬃx suf fi+1 with preﬁx α will be present in the subtree of u. The concatenation of edge labels along the path from v to leaf labeled i, and along the path from u to leaf labeled i + 1 will be the same. Similarly, each internal node in the subtree of v will have a corresponding internal node in the subtree of u. In this sense, the entire subtree under v is contained in the subtree under u. Every internal node in the suﬃx tree other than the root has a suﬃx link from it. Let v be an internal node with SL(v) = u. Let v be an ancestor of v other than the root and let u = SL(v ). As path-label(v ) is a preﬁx of path-label(v), path-label(u) is also a preﬁx of path-label(u). Thus, u is an ancestor of u. Each proper ancestor of v except the root will have a suﬃx link to a distinct proper ancestor of u. It follows that tree-depth(u) ≥ treedepth(v) − 1. Suﬃx trees and suﬃx arrays can be generalized to multiple strings. The generalized suﬃx tree of a set of strings S = {s1 , s2 , . . . , sk }, denoted GST (S) or simply GST , is a compacted trie of all suﬃxes of each string in S. We assume that the unique termination character $ is appended to the end of each string. A leaf label now consists of a pair of integers (i, j), where i denotes the suﬃx is from string si and j denotes the starting position of the suﬃx in si . Similarly, an edge label in a GST is a substring of one of the strings. An edge label is represented by a triplet of integers (i, j, l), where i denotes the string number, and j and l denote the starting and ending positions of the substring in si . For convenience of understanding, we will continue to show the actual edge labels. Note that two strings may have identical suﬃxes. This is compensated by allowing leaves in the tree to have multiple labels. If a leaf is multiply labeled, each suﬃx should come from a diﬀerent string. If N is the total number of characters (including the $ in each string) of all strings in S, the GST has at most N leaf nodes and takes up O(N ) space. The generalized suﬃx array of S, denoted GSA(S) or simply GSA, is a lexicographically sorted array of all suﬃxes of each string in S. Each suﬃx is represented by an integer pair (i, j) denoting suﬃx starting from position j in si . If suﬃxes from diﬀerent strings are identical, they occupy consecutive positions in the GSA. For convenience, we make an exception for the suﬃx $ by listing it only once, though it occurs in each string. The GST and GSA of strings apple and maple are shown in Figure 29.2. Suﬃx trees and suﬃx arrays can be constructed in time linear to the size of the input. Suﬃx trees are very useful in solving a plethora of string problems in optimal run-time bounds. Moreover, in many cases, the algorithms are very simple to design and understand. For example, consider the classic pattern matching problem of determining if a pattern P occurs in text T over a constant sized alphabet. Note that P occurs starting from position i in T iﬀ P is a preﬁx of suf fi in T . Thus, whether P occurs in T or not can be determined by checking if P matches an initial part of a path from root to a leaf in ST (T ). Traversing

© 2005 by Chapman & Hall/CRC

29-4

Handbook of Data Structures and Applications $

(s1 , 6) (s2 , 6)

p

p

a $

e

l e

a

$

l e

p l

$

(s2 , 2)

(s1 , 1)

p p

l e

l

(s1 , 5) e (s2 , 5)

$

s1 : apple s2 : maple

m

e (s1 , 4) (s2 , 4)

$

l e

$

$

(s2 , 1) (s1 , 3) (s2 , 3)

(s1 , 2)

GSA (s1 , 6)(s2 , 2) (s1 , 1) (s1 , 5)(s2 , 5)(s1 , 4)(s2 , 4)(s2 , 1)(s1 , 3)(s2 , 3)(s1 , 2) FIGURE 29.2: Generalized suﬃx tree and generalized suﬃx array of strings apple and maple. from the root matching characters in P , this can be determined in O(|P |) time, independent of the size of T . As another application, consider the problem of ﬁnding a longest common substring of a pair of strings. Once the GST of the two strings is constructed, all that is needed is to identify an internal node with the largest string depth that contains at least one leaf from each string. These and many other applications are explored in great detail in subsequent sections. Suﬃx arrays are of interest because they require much less space than suﬃx trees, and can be used to solve many of the same problems. We ﬁrst concentrate on linear time construction algorithms for suﬃx trees and suﬃx arrays. The reader interested in applications can safely skip to Section 29.3.

29.2

Linear Time Construction Algorithms

In this section, we explore linear time construction algorithms for suﬃx trees and suﬃx arrays. We also show how suﬃx trees and suﬃx arrays can be derived from each other in linear time. In suﬃx tree and suﬃx array construction algorithms, three diﬀerent types of alphabets are considered: a constant or ﬁxed size alphabet (|Σ| = O(1)), integer alphabet (Σ = {1, 2, . . . , n}), and arbitrary alphabet. Suﬃx trees and suﬃx arrays can be constructed in linear time for both constant size and integer alphabets. The constant alphabet size case covers many interesting application areas, such as English text, or DNA or protein sequences in molecular biology. The integer alphabet case is interesting because a string of length n can have at most n distinct characters. Furthermore, some algorithms use a recursive technique that would generate and require operating on strings over integer alphabet, even when applied to strings over a ﬁxed alphabet.

29.2.1

Suﬃx Trees vs. Suﬃx Arrays

We ﬁrst show that the suﬃx array and Lcp array of a string can be obtained from its suﬃx tree in linear time. Deﬁne lexicographic ordering of the children of a node to be the order based on the ﬁrst character of the edge labels connecting the node to its children. Deﬁne

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-5

lexicographic depth ﬁrst search to be a depth ﬁrst search of the tree where the children of each node are visited in lexicographic order. The order in which the leaves of a suﬃx tree are visited in a lexicographic depth ﬁrst search gives the suﬃx array of the corresponding string. In order to obtain lcp information, the string-depth of the current node during the search is remembered. This can be easily updated in O(1) time per edge as the search progresses. The length of the lcp between two consecutive suﬃxes is given by the smallest string-depth of a node visited between the two suﬃxes. Given the suﬃx array and the Lcp array of a string s (|s$| = n), its suﬃx tree can be constructed in O(n) time. This is done by starting with a partial suﬃx tree for the lexicographically smallest suﬃx, and repeatedly inserting subsequent suﬃxes in the suﬃx array into the tree until the suﬃx tree is complete. Let Ti denote the compacted trie of the ﬁrst i suﬃxes in lexicographic order. The ﬁrst tree T1 consists of a single leaf labeled SA[1] connected to the root with an edge labeled suf fSA[1] = $. To insert SA[i + 1] into Ti , start with the most recently inserted leaf SA[i] and walk up (|suf fSA[i] | − |lcp(suf fSA[i], suf fSA[i+1] )|) = ((n − SA[i] + 1) − Lcp[i]) characters along the path to the root. This walk can be done in O(1) time per edge by calculating the lengths of the respective edge labels. If the walk does not end at an internal node, create an internal node. Create a new leaf labeled SA[i + 1] and connect it to this internal node with an edge. Set the label on this edge to s[SA[i + 1] + Lcp[i]..n]. This creates the tree Ti+1 . The procedure works because suf fSA[i+1] shares a longer preﬁx with suf fSA[i] than any other suﬃx inserted so far. To see that the entire algorithm runs in O(n) time, note that inserting a new suﬃx into Ti requires walking up the rightmost path in Ti . Each edge that is traversed ceases to be on the rightmost path in Ti+1 , and thus is never traversed again. An edge in an intermediate tree Ti corresponds to a path in the suﬃx tree ST . When a new internal node is created along an edge in an intermediate tree, the edge is split into two edges, and the edge below the newly created internal node corresponds to an edge in the suﬃx tree. Once again, this edge ceases to be on the rightmost path and is never traversed again. The cost of creating an edge in an intermediate tree can be charged to the lowest edge on the corresponding path in the suﬃx tree. As each edge is charged once for creating and once for traversing, the total run-time of this procedure is O(n). Finally, the Lcp array itself can be constructed from the suﬃx array and the string in linear time [14]. Let R be an array of size n such that R[i] contains the position in SA of suf fi . R can be constructed by a linear scan of SA in O(n) time. The Lcp array is computed in n iterations. In iteration i of the algorithm, the longest common preﬁx between suf fi and its respective right neighbor in the suﬃx array is computed. The array R facilitates locating an arbitrary suﬃx suf fi and ﬁnding its right neighbor in the suﬃx array in constant time. Initially, the length of the longest common preﬁx between suf f1 and its suﬃx array neighbor is computed directly and recorded. Let suf fj be the right neighbor of suf fi in SA. Let l be the length of the longest common preﬁx between them. Suppose l ≥ 1. As suf fj is lexicographically greater than suf fi and s[i] = s[j], suf fj+1 is lexicographically greater than suf fi+1 . The length of the longest common preﬁx between them is l − 1. It follows that the length of the longest common preﬁx between suf fi+1 and its right neighbor in the suﬃx array is ≥ l − 1. To determine its correct length, the comparisons need only start from the lth characters of the suﬃxes. To prove that the run time of the above algorithm is linear, charge a comparison between the rth character in suﬃx suf fi and the corresponding character in its right neighbor suﬃx in SA to the position in the string of the rth character of suf fi , i.e., i + r − 1. A comparison made in an iteration is termed successful if the characters compared are identical, contributing to the longest common preﬁx being computed. Because there is one failed comparison in each iteration, the total number of failed comparisons is O(n). As

© 2005 by Chapman & Hall/CRC

29-6

Handbook of Data Structures and Applications

for successful comparisons, each position in the string is charged only once for a successful comparison. Thus, the total number of comparisons over all iterations is linear in n. In light of the above discussion, a suﬃx tree and a suﬃx array can be constructed from each other in linear time. Thus, a linear time construction algorithm for one can be used to construct the other in linear time. In the following subsections, we explore such algorithms. Each algorithm is interesting in its own right, and exploits interesting properties that could be useful in designing algorithms using suﬃx trees and suﬃx arrays.

29.2.2

Linear Time Construction of Suﬃx Trees

Let s be a string of length n including the termination character $. Suﬃx tree construction algorithms start with an empty tree and iteratively insert suﬃxes while maintaining the property that each intermediate tree represents a compacted trie of the suﬃxes inserted so far. When all the suﬃxes are inserted, the resulting tree will be the suﬃx tree. Suﬃx links are typically used to speedup the insertion of suﬃxes. While the algorithms are identiﬁed by the names of their respective inventors, the exposition presented does not necessarily follow the original algorithms and we take the liberty to comprehensively present the material in a way we feel contributes to ease of understanding. McCreight’s Algorithm

McCreight’s algorithm inserts suﬃxes in the order suf f1 , suf f2, . . . , suf fn . Let Ti denote the compacted trie after suf fi is inserted. T1 is the tree consisting of a single leaf labeled 1 that is connected to the root by an edge with label s[1..n]. In iteration i of the algorithm, suf fi is inserted into tree Ti−1 to form tree Ti . An easy way to do this is by starting from the root and following the unique path matching characters in suf fi one by one until no more matches are possible. If the traversal does not end at an internal node, create an internal node there. Then, attach a leaf labeled i to this internal node and use the unmatched portion of suf fi for the edge label. The run-time for inserting suf fi is proportional to |suf fi | = n − i + 1. The total run-time of the algorithm is Σni=1 (n − i + 1) = O(n2 ). In order to achieve an O(n) run-time, suﬃx links are used to signiﬁcantly speedup the insertion of a new suﬃx. Suﬃx links are useful in the following way − Suppose we are inserting suf fi in Ti−1 and let v be an internal node in Ti−1 on the path from root to leaf labeled (i − 1). Then, path-label(v) = cα is a preﬁx of suf fi−1 . Since v is an internal node, there must be another suﬃx suf fj (j < i − 1) that also has cα as preﬁx. Because suf fj+1 is previously inserted, there is already a path from the root in Ti−1 labeled α. To insert suf fi faster, if the end of path labeled α is quickly found, comparison of characters in suf fi can start beyond the preﬁx α. This is where suﬃx links will be useful. The algorithm must also construct suﬃx links prior to using them. Let v be an internal node in ST (s) that is created in iteration i − 1. Let path-label(v) = cα, where c is a character and α is a (possibly empty) string. Then, either there exists an internal node u with path-label(u) = α or it will be created in iteration i.

LEMMA 29.1

As v is created when inserting suf fi−1 in Ti−2 , there exists another suﬃx suf fj (j < i − 1) such that lcp(suf fi−1 , suf fj ) = cα. It follows that lcp(suf fi, suf fj+1 ) = α. The tree Ti already contains suf fj+1 . When suf fi is inserted during iteration i, internal node u with path-label α is created if it does not already exist. Proof

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-7

The above lemma establishes that the suﬃx link of a newly created internal node can be established in the next iteration. The following procedure is used when inserting suf fi in Ti−1 . Let v be the internal node to which suf fi−1 is attached as a leaf. If v is the root, insert suf fi using character comparisons starting with the ﬁrst character of suf fi . Otherwise, let path-label(v) = cα. If v has a suﬃx link from it, follow it to internal node u with path-label α. This allows skipping the comparison of the ﬁrst |α| characters of suf fi . If v is newly created in iteration i−1, it would not have a suﬃx link yet. In that case, walk up to parent v of v. Let β denote the label of the edge connecting v and v. Let u = SL(v ) unless v is the root, in which case let u be the root itself. It follows that path-label(u) is a preﬁx of suf fi . Furthermore, it is guaranteed that there is a path below u that matches the next |β| characters of suf fi . Traverse |β| characters along this path and either ﬁnd an internal node u or insert an internal node u if one does not already exist. In either case, set SL(v) = u. Continue by starting character comparisons skipping the ﬁrst |α| characters of suf fi . The above procedure requires two diﬀerent types of traversals − one in which it is known that there exists a path below that matches the next |β| characters of suf fi (type I), and the other in which it is unknown how many subsequent characters of suf fi match a path below (type II). In the latter case, the comparison must proceed character by character until a mismatch occurs. In the former case, however, the traversal can be done by spending only O(1) time per edge irrespective of the length of the edge label. At an internal node during such a traversal, the decision of which edge to follow next is made by comparing the next character of suf fi with the ﬁrst characters of the edge labels connecting the node to its children. However, once the edge is selected, the entire label or the remaining length of β must match, whichever is shorter. Thus, the traversal can be done in constant time per edge, and if the traversal stops within an edge label, the stopping position can also be determined in constant time. The insertion procedure during iteration i can now be described as follows: Start with the internal node v to which suf fi−1 is attached as a leaf. If v has a suﬃx link, follow it and perform a type II traversal to insert suf fi . Otherwise, walk up to v’s parent, take the suﬃx link from it unless it is the root, and perform a type I traversal to either ﬁnd or create the node u which will be linked from v by a suﬃx link. Continue with a type II traversal below u to insert suf fi . LEMMA 29.2

The total time spent in type I traversals over all iterations is O(n).

Proof A type I traversal is performed by walking down along a path from root to a leaf in O(1) time per edge. Each iteration consists of walking up at most one edge, following a suﬃx link, and then performing downward traversals (either type II or both type I and type II). Recall that if SL(v) = u, then tree-depth(u) ≥ tree-depth(v) − 1. Thus, following a suﬃx link may reduce the depth in the tree by at most one. It follows that the operations that may cause moving to a higher level in the tree cause a decrease in depth of at most 2 per iteration. As both type I and type II traversals increase the depth in the tree and there are at most n levels in ST , the total number of edges traversed by type I traversals over all the iterations is bounded by 3n. LEMMA 29.3 Proof

The total time spent in type II traversals over all iterations is O(n).

In a type II traversal, a suﬃx of the string suf fi is matched along a path in Ti−1

© 2005 by Chapman & Hall/CRC

29-8

Handbook of Data Structures and Applications

until there is a mismatch. When a mismatch occurs, an internal node is created if there does not exist one already. Then, the remaining part of suf fi becomes the edge label connecting leaf labeled i to the internal node. Charge each successful comparison of a character in suf fi to the corresponding character in the original string s. Note that a character that is charged with a successful comparison is never charged again as part of a type II traversal. Thus, the total time spent in type II traversals is O(n). The above lemmas prove that the total run-time of McCreight’s algorithm is O(n). McCreight’s algorithm is suitable for constant sized alphabets. The dependence of the run-time and space for storing suﬃx trees on the size of the alphabet |Σ| is as follows: A simple way to allocate space for internal nodes in a suﬃx tree is to allocate |Σ| + 1 pointers for children, one for each distinct character with which an edge label may begin. With this approach, the edge label beginning with a given character, or whether an edge label exists with a given character, can be determined in O(log |Σ|) time. However, as all |Σ| + 1 pointers are kept irrespective of how many children actually exist, the total space is O(|Σ|n). If the tree is stored such that each internal node points only to its leftmost child and each node also points to its next sibling, if any, the space can be reduced to O(n), irrespective of |Σ|. With this, searching for a child connected by an edge label with the appropriate character takes O(|Σ|) time. Thus, McCreight’s algorithm can be run in O(n log |Σ|) time using O(n|Σ|) space, or in O(n|Σ|) time using O(n) space. Generalized Suﬃx Trees

McCreight’s algorithm can be easily adapted to build the generalized suﬃx tree for a set S = {s1 , s2 , . . . , sk } of strings of total length N in O(N ) time. A simple way to do this is to construct the string S = s1 $1 s2 $2 . . . sk $k , where each $i is a unique string termination character that does not occur in any string in S. Using McCreight’s algorithm, ST (S) can be computed in O(N ) time. This diﬀers from GST (S) in the following way: Consider a suﬃx suf fj of string si in GST (S). The corresponding suﬃx in ST (S) is si [j..|si |]$i si+1 $i+1 . . . sk $k . Let v be the last internal node on the path from root to leaf representing this suﬃx in ST (S). As each $i is unique and path-label(v) must be a common preﬁx of at least two suﬃxes in S, path-label(v) must be a preﬁx of si [j..|si |]. Thus, by simply shortening the edge label below v to terminate at the end of the string si and attaching a common termination character $ to it, the corresponding suﬃx in GST (S) can be generated in O(1) time. Additionally, all suﬃxes in ST (S) that start with some $i should be removed and replaced by a single suﬃx $ in GST (S). Note that the suﬃxes to be removed are all directly connected to the root in ST (S), allowing easy O(1) time removal per suﬃx. Thus, GST (S) can be derived from ST (S) in O(N ) time. Instead of ﬁrst constructing ST (S) and shortening edge labels of edges connecting to leaves to construct GST (S), the process can be integrated into the tree construction itself to directly compute GST (S). When inserting the suﬃx of a string, directly set the edge label connecting to the newly created leaf to terminate at the end of the string, appended by $. As each suﬃx that begins with $i in ST (S) is directly attached to the root, execution of McCreight’s algorithm on S will always result in a downward traversal starting from the root when a suﬃx starting from the ﬁrst character of a string is being inserted. Thus, we can simply start with an empty tree, insert all the suﬃxes of one string using McCreight’s algorithm, insert all the suﬃxes of the next string, and continue this procedure until all strings are inserted. To insert the ﬁrst suﬃx of a string, start by matching the unique path in the current tree that matches with a preﬁx of the string until no more matches are possible, and insert the suﬃx by branching at this point. To insert the remaining suﬃxes,

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-9

continue as described in constructing the tree for one string. This procedure immediately gives an algorithm to maintain the generalized suﬃx tree of a set of strings in the presence of insertions and deletions of strings. Insertion of a string is the same as executing McCreight’s algorithm on the current tree, and takes time proportional to the length of the string being inserted. To delete a string, we must locate the leaves corresponding to all the suﬃxes of the string. By mimicking the process of inserting the string in GST using McCreight’s algorithm, all the corresponding leaf nodes can be reached in time linear in the size of the string to be deleted. To delete a suﬃx, examine the corresponding leaf. If it is multiply labeled, it is enough to remove the label corresponding to the suﬃx. It it has only one label, the leaf and edge leading to it must be deleted. If the parent of the leaf is left with only one child after deletion, the parent and its two incident edges are deleted by connecting the surviving child directly to its grandparent with an edge labeled with the concatenation of the labels of the two edges deleted. As the adjustment at each leaf takes O(1) time, the string can be deleted in time proportional to its length. Suﬃx trees were invented by Weiner [23], who also presented the ﬁrst linear time algorithm to construct them for a constant sized alphabet. McCreight’s algorithm is a more space-economical linear time construction algorithm [19]. A linear time on-line construction algorithm for suﬃx trees is invented by Ukkonen [22]. In fact, our presentation of McCreight’s algorithm also draws from ideas developed by Ukkonen. A uniﬁed view of these three suﬃx tree construction algorithms is studied by Giegerich and Kurtz [10]. Farach [7] presented the ﬁrst linear time algorithm for strings over integer alphabets. The algorithm recursively constructs suﬃx trees for all odd and all even suﬃxes, respectively, and uses a clever strategy for merging them. The complexity of suﬃx tree construction algorithms for various types of alphabets is explored in [8].

29.2.3

Linear Time Construction of Suﬃx Arrays

Suﬃx arrays were proposed by Manber and Myers [18] as a space-eﬃcient alternative to suﬃx trees. While suﬃx arrays can be deduced from suﬃx trees, which immediately implies any of the linear time suﬃx tree construction algorithms can be used for suﬃx arrays, it would not achieve the purpose of economy of space. Until recently, the fastest known direct construction algorithms for suﬃx arrays all required O(n log n) time, leaving a frustrating gap between asymptotically faster construction algorithms for suﬃx trees, and asymptotically slower construction algorithms for suﬃx arrays, despite the fact that suﬃx trees contain all the information in suﬃx arrays. This gap is successfully closed by a number of researchers in 2003, including K¨ar¨ akkanen and Sanders [13], Kim et al. [15], and Ko and Aluru [16]. All three algorithms work for the case of integer alphabet. Given the simplicity and/or space eﬃciency of some of these algorithms, it is now preferable to construct suﬃx trees via the construction of suﬃx arrays. K¨ ar¨ akkanen and Sanders’ Algorithm

K¨ ar¨ akkanen and Sanders’ algorithm is the simplest and most elegant algorithm to date to construct suﬃx arrays, and by implication suﬃx trees, in linear time. The algorithm also works for the case of an integer alphabet. Let s be a string of length n over the alphabet Σ = {1, 2, . . . , n}. For convenience, assume n is a multiple of three and s[n+1] = s[n+2] = 0. The algorithm has the following steps: 1. Recursively sort the 23 n suﬃxes suf fi with i mod 3 = 0. 2. Sort the 13 n suﬃxes suf fi with i mod 3 = 0 using the result of step (1). 3. Merge the two sorted arrays.

© 2005 by Chapman & Hall/CRC

29-10

Handbook of Data Structures and Applications

To execute step (1), ﬁrst perform a radix sort of the 23 n triples (s[i], s[i + 1], s[i + 2]) for each i mod 3 = 0 and associate with each distinct triple its rank ∈ {1, 2, . . . , 23 n} in sorted order. If all triples are distinct, the suﬃxes are already sorted. Otherwise, let suf fi denote the string obtained by taking suf fi and replacing each consecutive triplet with its corresponding rank. Create a new string s by concatenating suf f1 with suf f2 . Note that all suf fi with i mod 3 = 1 (i mod 3 = 2, respectively) are suﬃxes of suf f1 (suf f2 , respectively). A lexicographic comparison of two suﬃxes in s never crosses the boundary between suf f1 and suf f2 because the corresponding suﬃxes in the original string can be lexicographically distinguished. Thus, sorting s recursively gives the sorted order of suf fi with i mod 3 = 0. Step (2) can be accomplished by performing a radix sort on tuples (s[i], rank(suf fi+1 )) for all i mod 3 = 0, where rank(suf fi+1 ) denotes the rank of suf fi+1 in sorted order obtained in step (1). Merging of the sorted arrays created in steps (1) and (2) is done in linear time, aided by the fact that the lexicographic order of a pair of suﬃxes, one from each array, can be determined in constant time. To compare suf fi (i mod 3 = 1) with suf fj (i mod 3 = 0), compare s[i] with s[j]. If they are unequal, the answer is clear. If they are identical, the ranks of suf fi+1 and suf fj+1 in the sorted order obtained in step (1) determines the answer. To compare suf fi (i mod 3 = 2) with suf fj (i mod 3 = 0), compare the ﬁrst two characters of the two suﬃxes. If they are both identical, the ranks of suf fi+2 and suf fj+2 in the sorted order obtained in step (1) determines the answer. The run-time of this algorithm is given by the recurrence T (n) = T 2n 3 + O(n), which results in O(n) run-time. Note that the 23 : 13 split is designed to make the merging step easy. A 12 : 12 split does not allow easy merging because when comparing two suﬃxes for merging, no matter how many characters are compared, the remaining suﬃxes will not fall in the same sorted array, where ranking determines the result without need for further comparisons. Kim et al.’s linear time suﬃx array construction algorithm is based on a 12 : 12 split, and the merging phase is handled in a clever way so as to run in linear time. This is much like Farach’s algorithm for constructing suﬃx trees [7] by constructing suﬃx trees for even and odd positions separately and merging them. Both the above linear time suﬃx array construction algorithms partition the suﬃxes based on their starting positions in the string. A completely diﬀerent way of partitioning suﬃxes based on the lexicographic ordering of a suﬃx with its right neighboring suﬃx in the string is used by Ko and Aluru to derive a linear time algorithm [16]. This reduces solving a problem of size n to that of solving a problem of size no more than n2 , while eliminating the complex merging step. The algorithm can be made to run in only 2n words plus 1.25n bits for strings over constant alphabet. Algorithmically, K¨ ar¨ akkanen and Sanders’ algorithm is akin to mergesort and Ko and Aluru’s algorithm is akin to quicksort. Algorithms for constructing suﬃx arrays in external memory are investigated by Crauser and Ferragina [5]. It may be more space eﬃcient to construct a suﬃx tree by ﬁrst constructing the corresponding suﬃx array, deriving the Lcp array from it, and using both to construct the suﬃx tree. For example, while all direct linear time suﬃx tree construction algorithms depend on constructing and using suﬃx links, these are completely avoided in the indirect approach. Furthermore, the resulting algorithms have an alphabet independent run-time of O(n) while using only the O(n) space representation of suﬃx trees. This should be contrasted with the O(|Σ|n) run-time of either McCreight’s or Ukkonen’s algorithms.

29.2.4

Space Issues

Suﬃx trees and suﬃx arrays are space eﬃcient in an asymptotic sense because the memory required grows linearly with input size. However, the actual space usage is of signiﬁcant

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-11

concern, especially for very large strings. For example, the human genome can be represented as a large string over the alphabet Σ = {A, C, G, T } of length over 3 × 109 . Because of linear dependence of space on the length of the string, the exact space requirement is easily characterized by specifying it in terms of the number of bytes per character. Depending on the number of bytes per character required, a data structure for the human genome may ﬁt in main memory, may need a moderate sized disk, or might need a large amount of secondary storage. This has signiﬁcant inﬂuence on the run-time of an application as access to secondary storage is considerably slower. It may also become impossible to run an application for large data sizes unless careful attention is paid to space eﬃciency. Consider a naive implementation of suﬃx trees. For a string of length n, the tree has n leaves, at most n − 1 internal nodes, and at most 2n − 2 edges. For simplicity, count the space required for each integer or a pointer to be one word, equal to 4 bytes on most current computers. For each leaf node, we may store a pointer to its parent, and store the starting index of the suﬃx represented by the leaf, for 2n words of storage. Storage for each internal node may consist of 4 pointers, one each for parent, leftmost child, right sibling and suﬃx link, respectively. This will require approximately 4n words of storage. Each edge label consists of a pair of integers, for a total of at most 4n words of storage. Putting this all together, a naive implementation of suﬃx trees takes 10n words or 40n bytes of storage. Several techniques can be used to considerably reduce the naive space requirement of 40 bytes per character. Many applications of interest do not need to use suﬃx links. Similarly, a pointer to the parent may not be required for applications that use traversals down from the root. Even otherwise, note that a depth ﬁrst search traversal of the suﬃx tree starting from the root can be conducted even in the absence of parent links, and this can be utilized in applications where a bottom-up traversal is needed. Another technique is to store the internal nodes of the tree in an array in the order of their ﬁrst occurrence in a depth ﬁrst search traversal. With this, the leftmost child of an internal node is found right next to it in the array, which removes the need to store a child pointer. Instead of storing the starting and ending positions of a substring corresponding to an edge label, an edge label can be stored with the starting position and length of the substring. The advantage of doing so is that the length of the edge label is likely to be small. Hence, one byte can be used to store edge labels with lengths < 255 and the number 255 can be used to denote edge labels with length at least 255. The actual values of such labels can be stored in an exceptions list, which is expected to be fairly small. Using several such techniques, the space required per character can be roughly cut in half to about 20 bytes [17]. A suﬃx array can be stored in just one word per character, or 4 bytes. Most applications using suﬃx arrays also need the Lcp array. Similar to the technique employed in storing edge labels on suﬃx trees, the entries in Lcp array can also be stored using one byte, with exceptions handled using an ordered exceptions list. Provided most of the lcp values ﬁt in a byte, we only need 5 bytes per character, signiﬁcantly smaller than what is required for suﬃx trees. Further space reduction can be achieved by the use of compressed suﬃx trees and suﬃx arrays and other data structures [9, 11]. However, this often comes at the expense of increased run-time complexity.

29.3

Applications

In this section, we present algorithms for several string problems using suﬃx trees and suﬃx arrays. While the same run-time bounds can be achieved for many interesting applications with either a suﬃx tree or a suﬃx array, there are others which involve a space vs. time trade oﬀ. Even in cases where the same run-time bound can be achieved, it is often easier

© 2005 by Chapman & Hall/CRC

29-12

Handbook of Data Structures and Applications

to design the algorithm ﬁrst for a suﬃx tree, and then think if the implementation can be done using a suﬃx array. For this reason, we largely concentrate on suﬃx trees. The reader interested in reading more on applications of suﬃx arrays is referred to [1, 2].

29.3.1

Pattern Matching

Given a pattern P and a text T , the pattern matching problem is to ﬁnd all occurrences of P in T . Let |P | = m and |T | = n. Typically, n >> m. Moreover, T remains ﬁxed in many applications and the query is repeated for many diﬀerent patterns. For example, T could be a text document and P could represent a word search. Or, T could be an entire database of DNA sequences and P denote a substring of a query sequence for homology (similarity) search. Thus, it is beneﬁcial to preprocess the text T so that queries can be answered as eﬃciently as possible. Pattern Matching using Suﬃx Trees

The pattern matching problem can be solved in optimal O(m + k) time using ST (T ), where k is the number of occurrences of P in T . Suppose P occurs in T starting from position i. Then, P is a preﬁx of suf fi in T . It follows that P matches the path from root to leaf labeled i in ST . This property results in the following simple algorithm: Start from the root of ST and follow the path matching characters in P , until P is completely matched or a mismatch occurs. If P is not fully matched, it does not occur in T . Otherwise, each leaf in the subtree below the matching position gives an occurrence of P . The positions can be enumerated by traversing the subtree in time proportional to the size of the subtree. As the number of leaves in the subtree is k, this takes O(k) time. If only one occurrence is of interest, the suﬃx tree can be preprocessed in O(n) time such that each internal node contains the label of one of the leaves in its subtree. Thus, the problem of whether P occurs in T or the problem of ﬁnding one occurrence can be answered in O(m) time. Pattern Matching using Suﬃx Arrays

Consider the problem of pattern matching when the suﬃx array of the text, SA(T ), is available. As before, we need to ﬁnd all the suﬃxes that have P as a preﬁx. As SA is a lexicographically sorted order of the suﬃxes of T , all such suﬃxes will appear in consecutive positions in it. The sorted order in SA allows easy identiﬁcation of these suﬃxes using binary search. Using a binary search, ﬁnd the smallest index i in SA such that suf fSA[i] contains P as a preﬁx, or determine that no such suﬃx is present. If no suﬃx is found, P does not occur in T . Otherwise, ﬁnd the largest index j(≥ i) such that suf fSA[j] contains P as a preﬁx. All the elements in the range SA[i..j] give the starting positions of the occurrences of P in T . A binary search in SA takes O(log n) comparisons. In each comparison, P is compared with a suﬃx to determine their lexicographic order. This requires comparing at most |P | = m characters. Thus, the run-time of this algorithm is O(m log n). Note that while this run-time is inferior to the run-time using suﬃx trees, the space required by this algorithm is only n words for SA apart from the space required to store the string. Note that the Lcp array is not required. Assuming 4 bytes per suﬃx array entry and one byte per character in the string, the total space required is only 5n bytes. The run-time can be improved to O(m + log n), by using slightly more space and keeping track of appropriate lcp information. Consider an iteration of the binary search. Let SA[L..R] denote the range in the suﬃx array where the binary search is focused. To begin with, L = 1 and R = n. At the beginning of an iteration, the pattern P is known

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-13

to be lexicographically greater than or equal to suf fSA[L] and lexicographically smaller than or equal to suf fSA[R] . Let M = L+R 2 . During the iteration, a lexicographic comparison between P and suf fSA[M] is made. Depending on the result, the search range is narrowed to either SA[L..M ] or SA[M..R]. Assume that l = |lcp(P, suf fSA[L])| and r = |lcp(P, suf fSA[R])| are known at the beginning of the iteration. Also, assume that |lcp(suf fSA[L], suf fSA[M] )| and |lcp(suf fSA[M], suf fSA[R] )| are known. From these values, we wish to determine |lcp(P, suf fSA[M] )| for use in next iteration, and consequently determine the relative lexicographic order between P and suf fSA[M]. As SA is a lexicographically sorted array, P and suf fSA[M] must agree on at least min(l, r) characters. If l and r are equal, then comparison between P and suf fSA[M] is done by starting from the (l + 1)th character. If l and r are unequal, consider the case when l > r. Case I: l < |lcp(suf fSA[L], suf fSA[M])|. In this case, P is lexicographically greater than suf fSA[M] and |lcp(P, suf fSA[M] )| = |lcp(P, suf fSA[L])|. Change the search range to SA[M..R]. No character comparisons are needed. Case II: l > |lcp(suf fSA[L], suf fSA[M] )|. In this case, P is lexicographically smaller than suf fSA[M] and |lcp(P, suf fSA[M])| = |lcp(Suf fSA[L], suf fSA[M] )|. Change the search range to SA[L..M ]. Again, no character comparisons are needed. Case III: l = |lcp(suf fSA[L], suf fSA[M] )|. In this case, P agrees with the ﬁrst l characters of suf fSA[M] . Compare P and suf fSA[M] starting from (l + 1)th character to determine |lcp(P, suf fSA[M] )| and the relative lexicographic order of P and suf fSA[M] . Similarly, the case when r > l can be handled such that comparisons between P and suf fSA[M] , if at all needed, start from (r + 1)th character. To start the execution of the algorithm, lcp(P, suf fSA[1] ) and lcp(P, suf fSA[n]) are computed directly using at most 2|P | character comparisons. This ensures |lcp(P, suf fSA[L])| and |lcp(P, suf fSA[R] )| are known at the beginning of the ﬁrst iteration. This property is maintained for each iteration as L or R is shifted to M but |lcp(P, suf fSA[M] )| is computed. For now, assume that the required |lcp(suf fSA[L], suf fSA[M] )| and |lcp(suf fSA[R], suf fSA[M] )| values are available. LEMMA 29.4 O(m + log n).

The total number of character comparisons made by the algorithm is

Proof The algorithm makes at most 2m comparisons in determining the longest common preﬁxes between P and suf fSA[1] and between P and suf fSA[n] . Classify the comparisons made in each iteration to determine the longest common preﬁx between P and suf fSA[M] into successful and failed comparisons. A comparison is considered successful if it contributes the longest common preﬁx. There is at most one failed comparison per iteration, for a total of at most log n such comparisons over all iterations. As for successful comparisons, note that the comparisons start with (max(l, r) + 1)th character of P , and each successful comparison increases the value of max(l, r) for next iteration. Thus, each character of P is involved only once in a successful comparison. The total number of character comparisons is at most 3m + log n = O(m + log n).

It remains to be described how the |lcp(suf fSA[L], suf fSA[M] )| and |lcp(suf fSA[R], suf fSA[M] )| values required in each iteration are computed. Suppose the Lcp array of T is known. For

© 2005 by Chapman & Hall/CRC

29-14

Handbook of Data Structures and Applications

any 1 ≤ i < j ≤ n, |lcp(suf fSA[i] , suf fSA[j] )| = minj−1 k=i Lcp[k] The lcp of two suﬃxes can be computed in time proportional to the distance between them in the suﬃx array. In order to ﬁnd the lcp values required by the algorithm in constant time, consider the binary tree corresponding to all possible search intervals used by any execution of the binary search algorithm. The root of the tree denotes the interval [1..n]. If [i..j] (j − i ≥ 2) is the interval at an internal node of the tree, its left child is given by i+j [i.. i+j 2 ] and its right child is given by [ 2 ..j]. The execution of the binary search tree algorithm can be visualized as traversing a path in the binary tree from root to a leaf. If lcp value for each interval in the tree is precomputed and recorded, any required lcp value during the execution of the algorithm can be retrieved in constant time. The leaf level in the binary tree consists of intervals of the type [i..i + 1]. The lcp values for these n − 1 intervals is already given by the Lcp array. The lcp value corresponding to an interval at an internal node is given by the smaller of the lcp values at the children. Using a bottom-up traversal, the lcp values can be computed in O(n) time. In addition to the Lcp array, n − 2 additional lcp values are required to be stored. Assuming approximately 1 byte per lcp value, the algorithm requires approximately 2n bytes of additional space. As usual, lcp values larger than or equal to 255, if any, are stored in an exceptions list and the size of such list should be very small in practical applications. Thus, pattern matching can be solved in O(m log n) time using 5n bytes of space, or in O(m + log n) time using 7n bytes of space. Abouelhoda et al. [2] reduce this time further to O(m) time by mimicking the suﬃx tree algorithm on a suﬃx array with some auxiliary information. Using clever implementation techniques, the space is reduced to approximately 6n bytes. An interesting feature of their algorithm is that it can be used in other applications based on a top-down traversal of suﬃx tree.

29.3.2

Longest Common Substrings

Consider the problem of ﬁnding a longest substring common to two given strings s1 of size m and s2 of size n. To solve this problem, ﬁrst construct the GST of strings s1 and s2 . A longest substring common to s1 and s2 will be the path-label of an internal node with the greatest string depth in the suﬃx tree which has leaves labeled with suﬃxes from both the strings. Using a traversal of the GST , record the string-depth of each node, and mark each node if it has suﬃxes from both the strings. Find the largest string-depth of any marked node. Each marked internal node at that depth gives a longest common substring. The total run-time of this algorithm is O(m + n). The problem can also be solved by using the suﬃx tree of one of the strings and suﬃx links. Without loss of generality, suppose the suﬃx tree of s2 is given. For each position i in s1 , we ﬁnd the largest substring of s1 starting at that position that is also a substring of s2 . For position 1, this is directly computed by matching suf f1 of s1 starting from the root of the suﬃx tree until no more matches are possible. To determine the longest substring match from position 2, simply walk up to the ﬁrst internal node, follow the suﬃx link, and walk down as done in McCreight’s algorithm. A similar proof shows that this algorithm runs in O(m + n) time. Now consider solving the longest common substring problem using the GSA and Lcp array for strings s1 and s2 . First, consider a one string variant of this problem − that of computing the longest repeat in a string. This is given by the string depth of the deepest internal node in the corresponding suﬃx tree. All children of such a node must be leaves. Any consecutive pair of such leaves have the longest repeat as their longest common preﬁx.

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-15

Thus, each largest value in the Lcp array reveals a longest repeat in the string. The number of occurrences of a repeat is one more than the number of consecutive occurrences of the corresponding largest value in the Lcp array. Thus, all distinct longest repeats, and the number and positions of their occurrences can be determined by a linear scan of the Lcp array. To solve the longest common substring problem, let v denote an internal node with the greatest string depth that contains a suﬃx from each of the strings. Because such a pair of suﬃxes need not be consecutive in the suﬃx array, it might appear that one has to look at nonconsecutive entries in the Lcp array. However, the subtree of any internal node that is a child of v can only consist of suﬃxes from one of the strings. Thus, there will be two consecutive suﬃxes in the subtree under v, one from each string. Therefore, it is enough to look at consecutive entries in the GSA. In a linear scan of the GSA and Lcp arrays, ﬁnd the largest lcp value that corresponds to two consecutive suﬃxes, one from each string. This gives the length of a longest common substring. The starting positions of the suﬃxes reveals the positions in the strings where the longest common substring occurs. The algorithm runs in O(m + n) time.

29.3.3

Text Compression

Compression of text data is useful for data transmission and for compact storage. A simple, not necessarily optimal, data compression method is the Ziv-Lempel compression [24, 25]. In this method, the text to be compressed is considered a large string, and a compact representation is obtained by identifying repeats in the string. A simple algorithm following this strategy is as follows: Let T denote the text to be compressed and let |T | = n. At some stage during the execution of the compression algorithm, suppose that the string T [1..i − 1] is already compressed. The compression is extended by ﬁnding the length li of a largest preﬁx of suf fi that is a substring of T [1..i − 1]. Two cases arise: 1. li = 0. In this case, a compressed representation of T [1..i] is obtained by appending T [i] to the compressed representation of T [1..i − 1]. 2. li > 0. In this case, a compressed representation of T [1..i + li − 1] is obtained by appending (i, li ) to the compressed representation of T [1..i − 1]. The algorithm is initiated by setting T [1] to be the compressed representation of T [1..1], and continuing the iterations until the entire string is compressed. For example, executing the above algorithm on the string mississippi yields the compressed string mis(3, 1)(2, 3)(2, 1)p (9, 1)(2, 1). The decompression method for such a compressed string is immediate. Suﬃx trees can be used to carry out the compression in O(n) time [20]. They can be used in obtaining li , the length of the longest preﬁx of suf fi that is a substring of the portion of the string already seen, T [1..i − 1]. If j is the starting position of such a substring, then T [j..j + li − 1] = T [i..i + li − 1] and i ≥ j + li . It follows that |lcp(suf fj , suf fi )| ≥ li . Let v = lca(i, j), where i and j are leaves corresponding to suf fi and suf fj , respectively. It follows that T [i..i + li − 1] is a preﬁx of path-label(v). Consider the unique path from the root of ST (T ) that matches T [i..i + li − 1]. Node v is an internal node in the subtree below, and hence j is a leaf in the subtree below. Thus, li is the largest number of characters along the path T [i..n] such that ∃ leaf j in the subtree below with j + li ≤ i. Note that any j in the subtree below that satisﬁes the property j + li ≤ i is acceptable. If such a j exists, the smallest leaf number in the subtree below certainly satisﬁes this property, and hence can be chosen as the starting position j. This strategy results in the following algorithm for ﬁnding li : First, build the suﬃx tree of T . Using an appropriate linear time tree traversal method, record the string depth of each

© 2005 by Chapman & Hall/CRC

29-16

Handbook of Data Structures and Applications

node and mark each internal node with the smallest leaf label in its subtree. Let min(v) denote the smallest leaf label under internal node v. To ﬁnd li , walk along the path T [i..n] to identify two consecutive internal nodes u and v such that min(u) + string-depth(u) < i and min(v) + string-depth(v) ≥ i. If min(v) + string-depth(u) > i, then set li = stringdepth(u) and set the starting position to be min(u). Otherwise, set li = i − min(v) and set the starting position to be min(v). To obtain O(n) run-time, it is enough to ﬁnd li in O(li ) time as the next li characters of the string are compressed into an O(1) space representation of an already seen substring. Therefore, it is enough to traverse the path matching T [i..n] using individual character comparisons. However, as the path is guaranteed to exist, it can be traversed in O(1) time per edge, irrespective of the length of the edge label.

29.3.4

String Containment

Given a set of strings S = {s1 , s2 , . . . , sk } of total length N , the string containment problem is to identify each string that is a substring of some other string. An example application could be that the strings represent DNA sequence fragments, and we wish to remove redundancy. This problem can be easily solved using suﬃx trees in O(N ) time. First, construct the GST (S) in O(N ) time. To ﬁnd if a string si is contained in another, locate the leaf labeled (si , 1). If the label of the edge connecting the leaf to its parent is labeled with the string $, si is contained in another string. Otherwise, it is not. This can be determined in O(1) time per string.

29.3.5

Suﬃx-Preﬁx Overlaps

Suppose we are given a set of strings S = {s1 , s2 , . . . , sk } of total length N . The suﬃxpreﬁx overlap problem is to identify, for each pair of strings (si , sj ), the longest suﬃx of si that is a preﬁx of sj . Suﬃx-preﬁx overlaps are useful in algorithms for ﬁnding the shortest common superstring of a given set of strings. They are also useful in applications such as genome assembly where signiﬁcant suﬃx-preﬁx overlaps between pairs of fragments are used to assemble fragments into much larger sequences. The suﬃx-preﬁx overlap problem can be solved using GST (S) in optimal O(N +k 2 ) time. Consider the longest suﬃx α of si that is a preﬁx of sj . In GST (S), α is an initial part of the path from the root to leaf labeled (j, 1) that culminates in an internal node. A leaf that corresponds to a suﬃx from si should be a child of the internal node, with the edge label $. Moreover, it must be the deepest internal node on the path from root to leaf (j, 1) that has a suﬃx from si attached in this way. The length of the corresponding suﬃx-preﬁx overlap is given by the string depth of the internal node. Let M be a k × k output matrix such that M [i, j] should contain the length of the longest suﬃx of si that overlaps a preﬁx of sj . The matrix is computed using a depth ﬁrst search (DFS) traversal of GST (S). The GST is preprocessed to record the string depth of every node. During the DFS traversal, k stacks A1 , A2 , . . . , Ak are maintained, one for each string. The top of the stack Ai contains the string depth of the deepest node along the current DFS path that is connected with edge label $ to a leaf corresponding to a suﬃx from si . If no such node exists, the top of the stack contains zero. Each stack Ai is initialized by pushing zero onto an empty stack, and is maintained during the DFS as follows: When the DFS traversal visits a node v from its parent, check to see if v is attached to a leaf with edge label $. If so, for each i such that string si contributes a suﬃx labeling the leaf, push string-depth(v) on to stack Ai . The string depth of the current node can be easily maintained during the DFS traversal. When the DFS traversal leaves the node v to return

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-17

back to its parent, again identify each i that has the above property and pop the top element from the corresponding stack Ai . The output matrix M is built one column at a time. When the DFS traversal reaches a leaf labeled (j, 1), the top of stack Ai contains the longest suﬃx of si that matches a preﬁx of sj . Thus, column j of matrix M is obtained by setting M [i, j] to the top element of stack Si . To analyze the run-time of the algorithm, note that each push (similarly, pop) operation on a stack corresponds to a distinct suﬃx of one of the input strings. Thus, the total number of push and pop operations is bounded by O(N ). The matrix M is ﬁlled in O(1) time per element, taking O(k 2 ) time. Hence, all suﬃx-preﬁx overlaps can be identiﬁed in optimal O(N + k 2 ) time.

29.4

Lowest Common Ancestors

Consider a string s and two of its suﬃxes suf fi and suf fj . The longest common preﬁx of the two suﬃxes is given by the path label of their lowest common ancestor. If the string-depth of each node is recorded in it, the length of the longest common preﬁx can be retrieved from the lowest common ancestor. Thus, an algorithm to ﬁnd the lowest common ancestors quickly can be used to determine longest common preﬁxes without a single character comparison. In this section, we describe how to preprocess the suﬃx tree in linear time and be able to answer lowest common ancestor queries in constant time [3]. Bender and Farach’s lca algorithm

Let T be a tree of n nodes. Without loss of generality, assume the nodes are numbered 1 . . . n. Let lca(i, j) denote the lowest common ancestor of nodes i and j. Bender and Farach’s algorithm performs a linear time preprocessing of the tree and can answer lca queries in constant time. Let E be an Euler tour of the tree obtained by listing the nodes visited in a depth ﬁrst search of T starting from the root. Let L be an array of level numbers such that L[i] contains the tree-depth of the node E[i]. Both E and L contain 2n − 1 elements and can be constructed by a depth ﬁrst search of T in linear time. Let R be an array of size n such that R[i] contains the index of the ﬁrst occurrence of node i in E. Let RM QA (i, j) denote the position of an occurrence of the smallest element in array A between indices i and j (inclusive). For nodes i and j, their lowest common ancestor is the node at the smallest tree-depth that is visited between an occurrence of i and an occurrence of j in the Euler tour. It follows that lca(i, j) = E[RM QL (R[i], R[j])] Thus, the problem of answering lca queries transforms into answering range minimum queries in arrays. Without loss of generality, we henceforth restrict our attention to answering range minimum queries in an array A of size n. To answer range minimum queries in A, do the following preprocessing: Create log n+1 arrays B0 , B1 , . . . , Blog n such that Bj [i] contains RM QA (i, i + 2j ), provided i + 2j ≤ n. B0 can be computed directly from A in linear time. To compute Bl [i], use Bl−1 [i] and Bl−1 [i + 2l−1 ] to ﬁnd RM QA (i, i + 2l−1 ) and RM QA (i + 2l−1 , i + 2l ), respectively. By comparing the elements in A at these locations, the smallest element in the range A[i..i + 2l ] can be determined in constant time. Using this method, all the log n + 1 arrays are computed in O(n log n) time. Given an arbitrary range minimum query RM QA (i, j), let k be the largest integer such that 2k ≤ (j − i). Split the range [i..j] into two overlapping ranges [i..i + 2k ] and [j − 2k ..j]. Using Bk [i] and Bk [j − 2k ], a smallest element in each of these overlapping ranges can be

© 2005 by Chapman & Hall/CRC

29-18

Handbook of Data Structures and Applications

located in constant time. This will allow determination of RM QA (i, j) in constant time. To avoid a direct computation of k, the largest power of 2 that is smaller than or equal to each integer in the range [1..n] can be precomputed and stored in O(n) time. Putting all of this together, range minimum queries can be answered with O(n log n) preprocessing time and O(1) query time. 2n The preprocessing time is reduced to O(n) as follows: Divide the array A into log n blocks 1 of size 2 log n each. Preprocess each block such that for every pair (i, j) that falls within a 2n block, RM QA (i, j) can be answered directly. Form an array B of size log n that contains the minimum element from each of the blocks in A, in the order of the blocks in A, and record the locations of the minimum in each block in another array C. An arbitrary query RM QA (i, j) where i and j do not fall in the same block is answered as follows: Directly ﬁnd the location of the minimum in the range from i to the end of the block containing it, and also in the range from the beginning of the block containing j to index j. All that remains is to ﬁnd the location of the minimum in the range of blocks completely contained between i and j. This is done by the corresponding range minimum query in B and using C to ﬁnd the location in A of the resulting smallest element. To answer range queries in B, B is preprocessed as outlined before. Because the size of B is only O logn n , preprocessing B takes O logn n × log logn n = O(n) time and space. It remains to be described how each of the blocks in A is preprocessed to answer range minimum queries that fall within a block. For each pair (i, j) of indices that fall in a block, the corresponding range minimum query is precomputed and stored. This requires computing O(log2 n) values per block and can be done in O(log2 n) time per block. The 2 2n total run-time over all blocks is log n × O(log n) = O(n log n), which is unacceptable. The run-time can be reduced for the special case where the array A contains level numbers of nodes visited in an Euler Tour, by exploiting its special properties. Note that the level 2n 1 numbers of consecutive entries diﬀer by +1 or −1. Consider the log n blocks of size 2 log n. Normalize each block by subtracting the ﬁrst element of the block from each element of the block. This does not aﬀect the range minimum query. As the ﬁrst element of each block is 0 and any other element diﬀers from the previous one by +1 or −1, the number √ 1 of distinct blocks is 2 2 log n−1 = 12 n. Direct preprocessing of the distinct blocks takes 2 1√ 2 n × O(log n) = O(n) time. The mapping of each block to its corresponding distinct normalized block can be done in time proportional to the length of the block, taking O(n) time over all blocks. Putting it all together, a tree T of n nodes can be preprocessed in O(n) time such that lca queries for any two nodes can be answered in constant time. We are interested in an application of this general algorithm to suﬃx trees. Consider a suﬃx tree for a string of length n. After linear time preprocessing, lca queries on the tree can be answered in constant time. For a given pair of suﬃxes in the string, the string-depth of their lowest common ancestor gives the length of their longest common preﬁx. Thus, the longest common preﬁx can be determined in constant time, without resorting to a single character comparison! This feature is exploited in many suﬃx tree algorithms.

29.5 29.5.1

Advanced Applications Suﬃx Links from Lowest Common Ancestors

Suppose we are given a suﬃx tree and it is required to establish suﬃx links for each internal node. This may become necessary if the suﬃx tree creation algorithm does not construct

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-19

suﬃx links but they are needed for an application of interest. For example, the suﬃx tree may be constructed via suﬃx arrays, completely avoiding the construction and use of suﬃx links for building the tree. The links can be easily established if the tree is preprocessed for lca queries. Mark each internal node v of the suﬃx tree with a pair of leaves (i, j) such that leaves labeled i and j are in the subtrees of diﬀerent children of v. The marking can be done in linear time by a bottom-up traversal of the tree. To ﬁnd the suﬃx link from an internal node v (other than the root) marked with (i, j), note that v = lca(i, j) and lcp(suf fi , suf fj ) = path-label(v). Let path-label(v) = cα, where c is the ﬁrst character and α is a string. To establish a suﬃx link from v, node u with path label α is needed. As lcp(suf fi+1 , suf fj+1 ) = α, node u is given by lca(i + 1, j + 1), which can be determined in constant time. Thus, all suﬃx links can be determined in O(n) time. This method trivially extends to the case of a generalized suﬃx tree.

29.5.2

Approximate Pattern Matching

The simpler version of approximate pattern matching problem is as follows: Given a pattern P (|P | = m) and a text T (|T | = n), ﬁnd all substrings of length |P | in T that match P with at most k mismatches. To solve this problem, ﬁrst construct the GST of P and T . Preprocess the GST to record the string-depth of each node, and to answer lca queries in constant time. For each position i in T , we will determine if T [i..i + m − 1] matches P with at most k mismatches. First, use an lca query lca((P, 1), (T, i)) to ﬁnd the largest substring from position i of T that matches a substring from position 1 and P . Suppose the length of this longest exact match is l. Thus, P [1..l] = T [i..i + l − 1], and P [l + 1] = T [i + l]. Count this as a mismatch and continue by ﬁnding lca((P, l + 2), (T, i + l + 1)). This procedure is continued until either the end of P is reached or the number of mismatches crosses k. As each lca query takes constant time, the entire procedures takes O(k) time. This is repeated for each position i in T for a total run-time of O(kn). Now, consider the more general problem of ﬁnding the substrings of T that can be derived from P by using at most k character insertions, deletions or substitutions. To solve this problem, we proceed as before by determining the possibility of such a match for every starting position i in T . Let l = string-depth(lca((P, 1), (T, i))). At this stage, we consider three possibilities: 1. Substitution − P [l + 1] and T [i + l] are considered a mismatch. Continue by ﬁnding lca((P, l + 2), (T, i + l + 1)). 2. Insertion − T [i + l] is considered an insertion in P after P [l]. Continue by ﬁnding lca((P, l + 1), (T, i + l + 1)). 3. Deletion − P [l + 1] is considered a deletion. Continue by ﬁnding lca((P, l + 2), (T, i + l)). After each lca computation, we have three possibilities corresponding to substitution, insertion and deletion, respectively. All possibilities are enumerated to ﬁnd if there is a sequence of k or less operations that will transform P into a substring starting from position i in T . This takes O(3k ) time. Repeating this algorithm for each position i in T takes O(3k n) time. The above algorithm always uses the longest exact match possible from a given pair of positions in P and T before considering the possibility of an insertion or deletion. To prove the correctness of this algorithm, we show that if there is an approximate match of P starting from position i in T that does not use such a longest exact match, then

© 2005 by Chapman & Hall/CRC

29-20

Handbook of Data Structures and Applications

there exists another approximate match that uses only longest exact matches. Consider an approximate match that does not use longest exact matches. Consider the leftmost position j in P and the corresponding position i + k in T where the longest exact match is violated. i.e., P [j] = T [i + k] but this is not used as part of an exact match. Instead, an insertion or deletion is used. Suppose that an exact match of length r is used after the insertion or deletion. We can come up with a corresponding approximate match where the longest match is used and the insertion/deletion is taken after that. This will either keep the number of insertions/deletions the same or reduce the count. If the value of k is small, the above algorithms provide a quick and easy way to solve the approximate pattern matching problem. For sophisticated algorithms with better run-times, see [4, 21].

29.5.3

Maximal Palindromes

A string is called a palindrome if it reads the same forwards or backwards. A substring s[i..j] of a string s is called a maximal palindrome of s, if s[i..j] is a palindrome and s[i − 1] = s[j + 1] (unless i = 1 or j = n). The maximal palindrome problem is to ﬁnd all maximal palindromes of a string s. For a palindrome of odd length, say 2k + 1, deﬁne the center of the palindrome to be the (k + 1)th character. For a palindrome of even length, say 2k, deﬁne the center to be the position between characters k and k + 1 of the palindrome. In either case, the palindrome is said to be of radius k. Starting from the center, a palindrome is a string that reads the same in both directions. Observe that each maximal palindrome in a string must have a distinct center. As the number of possible centers for a string of length n is 2n − 1, the total number of maximal palindromes of a string is 2n − 1. All such palindromes can be identiﬁed in linear time using the following algorithm. Let sr denote the reverse of string s. Construct a GST of the strings s and sr and preprocess the GST to record string depths of internal nodes and for answering lca queries. Now, consider a character s[i] in the string. The maximal odd length palindrome centered at s[i] is given by the length of the longest common preﬁx between suf fi+1 of s and suf fn−i+2 of sr . This is easily computed as the string-depth of lca((s, i + 1), (sr , n − i + 2)) in constant time. Similarly, the maximal even length palindrome centered between s[i] and s[i + 1] is given by the length of the longest common preﬁx between suf fi+1 of s and suf fn−i+1 of sr . This is computed as the string-depth of lca((s, i + 1), (sr , n − i + 1)) in constant time. These and many other applications involving strings can be solved eﬃciently using suﬃx trees and suﬃx arrays. A comprehensive treatise of suﬃx trees, suﬃx arrays and string algorithms can be found in the textbooks by Gusﬁeld [12], and Crochemore and Rytter [6].

Acknowledgment This work was supported, in part, by the NSF under grant ACI-0203782.

References [1] M. I. Abouelhoda, S. Kurtz, and E. Ohlebusch. The enhanced suﬃx array and its applications to genome analysis. In 2nd Workshop on Algorithms in Bioinformatics, pages 449–63, 2002. [2] M. I. Abouelhoda, E. Ohlebusch, and S. Kurtz. Optimal exact string matching based on suﬃx arrays. In International Symposium on String Processing and Information Retrieval, pages 31–43. IEEE, 2002. [3] M.A. Bender and M. Farach-Colton. The LCA problem revisited. In Latin American Theoretical Informatics Symposium, pages 88–94, 2000.

© 2005 by Chapman & Hall/CRC

Suﬃx Trees and Suﬃx Arrays

29-21

[4] R. Cole and R. Hariharan. Approximate string matching: A simpler faster algorithm. SIAM Journal on Computing, 31:1761–1782, 2002. [5] A. Crauser and P. Ferragina. A theoretical and experimental study on the construction of suﬃx arrays in external memory. Algorithmica, 32(1):1–35, 2002. [6] M. Crochemore and W. Rytter. Jewels of Stringology. World Scientiﬁc Publishing Company, Singapore, 2002. [7] M. Farach. Optimal suﬃx tree construction with large alphabets. In 38th Annual Symposium on Foundations of Computer Science, pages 137–143. IEEE, 1997. [8] M. Farach-Colton, P. Ferragina, and S. Muthukrishnan. On the sorting-complexity of suﬃx tree construction. Journal of the ACM, 47, 2000. [9] P. Ferragina and G. Manzini. Opportunistic data structures with applications. In 41th Annual Symposium on Foundations of Computer Science, pages 390–398. IEEE, 2000. [10] R. Giegerich and S. Kurtz. From Ukkonen to McCreight and Weiner: A unifying view of linear-time suﬃx tree construction. Algorithmica, 19:331–353, 1997. [11] R. Grossi and J.S. Vitter. Compressed suﬃx arrays and suﬃx trees with applications to text indexing and string matching. In Symposium on the Theory of Computing, pages 397–406. ACM, 2000. [12] D. Gusﬁeld. Algorithms on Strings Trees and Sequences. Cambridge University Press, New York, New York, 1997. [13] J. K¨arkk¨ anen and P. Sanders. Simpler linear work suﬃx array construction. In International Colloquium on Automata, Languages and Programming, 2003. [14] T. Kasai, G. Lee, H. Arimura, S. Arikawa, and K. Park. Linear-time longest-commonpreﬁx computation in suﬃx arrays and its applications. In 12th Annual Symposium, Combinatorial Pattern Matching, pages 181–92, 2001. [15] D. K. Kim, J. S. Sim, H. Park, and K. Park. Linear-time construction of suﬃx arrays. In 14th Annual Symposium, Combinatorial Pattern Matching, 2003. [16] P. Ko and S. Aluru. Space-eﬃcient linear-time construction of suﬃx arrays. In 14th Annual Symposium, Combinatorial Pattern Matching, 2003. [17] S. Kurtz. Reducing the space requirement of suﬃx trees. Software - Practice and Experience, 29(13):1149–1171, 1999. [18] U. Manber and G. Myers. Suﬃx arrays: a new method for on-line search. SIAM Journal on Computing, 22:935–48, 1993. [19] E. M. McCreight. A space-economical suﬃx tree construction algorithm. Journal of the ACM, 23:262–72, 1976. [20] M. Rodeh, V.R. Pratt, and S. Even. A linear algorithm for data compression via string matching. Journal of the ACM, 28:16–24, 1981. [21] E. Ukkonen. Approximate string-matching over suﬃx trees. In A. Apostolico, M. Crochemore, Z. Galil, and U. Manber, editors, Combinatorial Pattern Matching, 4th Annual Symposium, volume 684 of Lecture Notes in Computer Science, pages 228–242, Padova, Italy, 1993. Springer. [22] E. Ukkonen. On-line construction of suﬃx-trees. Algorithmica, 14:249–60, 1995. [23] P. Weiner. Linear pattern matching algorithms. In 14th Symposium on Switching and Automata Theory, pages 1–11. IEEE, 1973. [24] J. Ziv and A. Lempel. A universal algorithm for sequential data compression. IEEE Transactions on Information Theory, 23:337–343, 1977. [25] J. Ziv and A. Lempel. Compression of individual sequences via variable length coding. IEEE Transactions on Information Theory, 24:530–536, 1978.

© 2005 by Chapman & Hall/CRC

30 String Searching 30.1 30.2 30.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preliminaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The DAWG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A Simple Algorithm for Constructing the DAWG Constructing the DAWG in Linear Time

30.4

Ross M. McConnell Colorado State University

30.1

•

The Compact DAWG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-13 Using the Compact DAWG to Find the Locations of a String in the Text • Variations and Applications

Andrzej Ehrenfeucht University of Colorado, Boulder

30-1 30-4 30-4

30.5

The Position Heap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-17 Building the Position Heap • Querying the Position Heap • Time Bounds • Improvements to the Time Bounds

Introduction

Searching for occurrences of a substring in a text is a common operation familiar to anyone who uses a text editor, word processor, or web browser. It is also the case that algorithms for analyzing textual databases can generate a large number of searches. If a text, such as a portion of the genome of an organism, is to be searched repeatedly, it is sometimes the case that it pays to preprocess the text to create a data structure that facilitates the searches. The suﬃx tree [5] and suﬃx array [4] discussed in Chapter 29 are examples. In this chapter, we give some alternatives to these data structures that have advantages over them in some circumstances, depending on what type of searches or analysis of the text are desired, the amount of memory available, and the amount of eﬀort to be invested in an implementation. In particular, we focus on the problem of ﬁnding the locations of all occurrences of a string x in a text t, where the letters of t are drawn from a ﬁxed alphabet Σ, such as the ASCII letter codes. The length of a string x, denoted |x|, is the number of characters in it. The empty string, denoted λ is the string of length 0 that has no characters in it. If t = a1 a2 , ..., an is a text and p = ai ai+1 ...aj is a substring of it, then i is a starting position of p in t, and j is an ending position of p in t. For instance, the starting positions of abc in aabcabcaac are {2, 5}, and its ending positions are {5, 8}. We consider the empty string to have starting and ending positions at {0, 1, 2, ..., n}, once at each position in the text, and once at position 0, preceding the ﬁrst character of the text. Let EndP ositions(p, t) denote the ending positions of p in t; when t is understood, we may denote it EndP ositions(p). A deterministic ﬁnite automaton on Σ is a directed graph where each directed edge is labeled with a letter from Σ, and where, for each node, there is at most one edge directed

30-1

© 2005 by Chapman & Hall/CRC

30-2

Handbook of Data Structures and Applications

out of the node that is labeled with any given letter. Exactly one of the nodes is designated as a start node, and some of the nodes are designated as accept nodes. The label of a directed path is the word given by the sequence of letters on the path. A deterministic ﬁnite automaton is used for representing a set of words, namely, the set of the set of labels of paths from the start node to an accept node. The ﬁrst data structure that we examine is the directed acyclic word graph. The DAWG is just the deterministic ﬁnite automaton representing the set of subwords of a text t. All of its states except for one are accept states. There is no edge from the non-accepting state to any accepting state, so it is convenient to omit the non-accept state when representing the DAWG. In this representation, a string p is a substring of t iﬀ it is the label of a directed path originating at the start node. There exists a labeling of each node of the DAWG with a set of positions so that the DAWG has the following property: • Whenever p is a substring of t, its ending positions in t are given by the label of the last node of the path of label p that originates at the start node. To ﬁnd the locations where p occurs, one need only begin at the start node, follow edges that match the letters of p in order, and retrieve the set of positions at the node where this process halts.

c

{0,1,...,10} a {1,2,5,8,9} c

{4,7,10} a

b b

{3,6}

c

{4,7}

a

a

{5,8} b

a {2,9} b

{3} c

{4} a

{5} b

{6} c

{7} a

{8} a

{9} c

{10}

c

a a b c a b c a a c 1 2 3 4 5 6 7 8 9 10

FIGURE 30.1: The DAWG of the text aabcabcaac. The starting node is at the upper left. A string p is a substring of the text if and only if it is the label of a path originating at the start node. The nodes can be labeled so that whenever p is the label of such a path, the last node of the path gives EndP ositions(p). For instance, the strings that lead to the state labeled {5, 8} are ca, bca, and abca, and these have occurrences in the text with their last letter at positions 5 and 8.

In view of the fact that there are Θ(|t|2 ) intervals on t, each of which represents a substring that is contained in the interval, it is surprising that the number of nodes and edges of the DAWG of t is O(|t|). The reason for this is that all possible query strings fall naturally into equivalence classes, which are sets of strings such that two strings are in the same set if

© 2005 by Chapman & Hall/CRC

String Searching

30-3

they have the same set of ending positions. The size of an equivalence class can be large, and this economy makes the O(|t|) bound possible. In an application such as a search engine, one may be interested not in the locations of a string in a text, but the number of occurrences of a string in the text. This is one criterion for deciding which texts are most relevant to a query. Since all strings in an equivalence class have the same number of occurrences, each state can be labeled not with the position set, but with the cardinality of its position set. The label of the node reached on the path labeled p originating at the start node tells the number of occurrences of p in t in O(|p|) time. This variant require O(|t|) space and can be constructed in O(|t|) time. Unfortunately, the sum of cardinalities of the position sets of the nodes of the DAWG of t is not O(|t|). However, a second data structure that we describe, called the compact DAWG does use O(|t|) space. If a string p has k occurrences in t, then it takes O(|p| + k) time to return the set of occurrences where p occurs in t, given the compact DAWG of t. It can be built in O(|t|) time. These bounds are the same as that for the suﬃx tree and suﬃx array, but the compact DAWG requires substantially less space in most cases. An example is illustrated in Figure 30.2.

{0,1,...,10} a

ca bca

{1,2,5,8,9} a

ac

{5,8} bca

bcaac

{2,9}

c

{10}

bcabcaac c a a b c a b c a a c 1 2 3 4 5 6 7 8 9 10

FIGURE 30.2: The compact DAWG of the text aabcabcaac. (Compare to Figure 30.1.) The labels depicted in the nodes are the ending positions of the corresponding principal nodes of the DAWG. The compact DAWG is obtained from the DAWG by deleting nodes that have only one outgoing edge, and representing deleted paths between the remaining nodes with edges that are labeled with the path’s label.

Another important issue is the ease with which a programmer can understand and program the construction algorithm. Like the computer time required for queries, the time spent by a programmer understanding, writing, and maintaining a program is also a resource that must be considered. The third data structure that we present, called the position heap, has worse worst-case bounds for construction and queries, but has the advantage of being as easy to understand and construct as elementary data structures such as unbalanced binary search trees and heaps. One tradeoﬀ is that the worst-case bounds for a query is O(|p|2 + k), rather than O(|p| + k). However, on randomly generated strings, the expected time for a query is O(|p| + k), and on most practical applications, the query time can be expected not to diﬀer greatly from this. Like the other structures, it can be

© 2005 by Chapman & Hall/CRC

30-4

Handbook of Data Structures and Applications

constructed in linear time. However, an extremely simple implementation takes O(|t| log |t|) expected time on randomly generate strings, and does not depart much from this in most practical applications. Those who wish to expend minimal programming eﬀort may wish to consider this simple variant of the construction algorithm. The position heap for the string of Figure 30.1 is illustrated in Figure 30.3.

10 a 1 2 3 4 5 6 7 8 9 10 a a b c a b c a a c

b

c

9 a 8 b

6 b

c

5

7 a

3

4

c 1

2

FIGURE 30.3: The position heap of aabcabcaa.

30.2

Preliminaries

The inﬁnite set of all strings that can be formed from letters of an alphabet Σ is denoted Σ∗ . If a ∈ Σ, let an denote the string that consists of n repetitions of a. If x is a string, then for 1 ≤ j ≤ |x|, let xj denote the character in position j. Thus, x can be written as x1 x2 , ..., x|x| . The reversal xR of x is the string x|x| x|x|−1 ...x1 . Let x[i : j] denote the substring xi xi+1 , ..., xj . The preﬁxes of a string x = x1 x2 , ..., xk are those with a starting position at the leftmost position of x, namely, the empty string and those strings of the form x[1 : j] for 1 ≤ j ≤ k. Its suﬃxes are those with an ending position at the rightmost position of x, namely, the empty string and those of the form x[j : k]. A trie on Σ is a deterministic ﬁnite automaton that is a rooted tree whose start node is the root. Given a family F of subsets of a domain V, the transitive reduction of the subset relation can be viewed as a pointer from each X ∈ F to each Y ∈ F such that X ⊂ Y and there exists no Z such that X ⊂ Z ⊂ Y . This is sometimes referred to as the Hasse diagram of the subset relation on the family. The Hasse diagram is a tree if V ∈ F, ∅ ∈ F, and for each X, Y ∈ F , either X ⊆ Y , Y ⊂ X, or X ∩ Y = ∅.

30.3

The DAWG

LEMMA 30.1 Let x and y be two strings such that EndP ositions(x)∩EndP ositions(y) = ∅. One of x and y must be a suﬃx of the other, and either EndP ositions(x) = EndP ositions(y), EndP ositions(x) ⊂ EndP ositions(y) or EndP ositions(y) ⊂ EndP ositions(x). Proof

If x and y have a common ending position i, then the two occurrences coincide in

© 2005 by Chapman & Hall/CRC

String Searching

30-5

a way that forces one to be a suﬃx of the other. Suppose without loss of generality that y is a suﬃx of x. Then every occurrence of x contains an occurrence of y inside of it that ends at the same position, so Endpositions(x) ⊆ Endpositions(y). ♦ For instance, in the string aabcabcaac, the string ca has ending positions {5, 8}, while the string aabca has ending positions {5}, and ca is a suﬃx of aabca. Let x’s right-equivalence class in t be the set {y|EndP ositions(y) = EndP ositions(x)}. The only inﬁnite class is degenerate class of strings with the empty set as ending positions, namely those elements of Σ∗ that are not substrings of t. The right-equivalence classes on t are a partition of Σ∗ : each member of Σ∗ is in one and only one right-equivalence class. By Lemma 30.1, whenever two strings are in the same nondegenerate right-equivalence class, then one of them is a suﬃx of the other. It is easily seen that if y is the shortest string in the class and x is the longest, then the class consists of the suﬃxes of x whose length is at least |y|. For instance, in Figure 30.1, the class of strings with end positions {5, 8} consists of y = ca, x = abca, and since bca is a longer suﬃx of x than y is. LEMMA 30.2

A text t of length n has at most 2n right-equivalence classes.

The degenerate class is one right equivalence class. All others have nonempty ending positions, and we must show that there are at most 2n − 1 of them. The set V = {0, 1, 2, ..., n} is the set of ending positions of the empty string. If X and Y are sets of ending positions of two right-equivalence classes, then X ⊆ Y , Y ⊆ X, or Y ∩ X = ∅, by Lemma 30.1. Therefore, the transitive reduction (Hasse diagram) of the subset relation on the nonempty position sets is a tree rooted at V . For any i such that {i} is not a leaf, we can add {i} as a child of the lowest set that contains i as a member. The leaves are now a partition of {1, 2, ..., n} so it has at most n leaves. Since each node of the tree has at least two children, there are at most 2n − 1 nodes. ♦ Proof

The DAWG is deﬁned as follows. The states of the DAWG are the nondegenerate right-equivalence classes that t induces on its substrings. For each a ∈ Σ and x ∈ Σ∗ such that xa is a substring of t, there is an edge labeled a from x’s right-equivalence class to xa’s right-equivalence class. DEFINITION 30.1

Figure 30.1 depicts the DAWG by labeling each right-equivalence class with its set of ending positions. The set of words in a class is just the set of path labels of paths leading from the source to a class. For instance, the right-equivalence class represented by the node labeled {5, 8} is {ca, bca, abca}. It would be natural to include the inﬁnite degenerate class of strings that do not occur in t. This would ensure that every state had an outgoing edge for every letter of Σ. However, it is convenient to omit this state when representing the DAWG: for each a ∈ Σ, there is an edge from the degenerate class to itself, and this does not need to be represented explicitly. An edge labeled a from a nondegenerate class to the degenerate class is implied by the absence of an edge out of the state labeled a in the representation. For each node X and each a ∈ Σ, there is at most one transition out of X that is labeled a. Therefore, the DAWG is a deterministic ﬁnite automaton. Any word p such that EndP ositions(p) = ∅ spells out the labels of a path to the state corresponding to EndP ositions(p). Therefore, all states of the DAWG are reachable from the start state.

© 2005 by Chapman & Hall/CRC

30-6

Handbook of Data Structures and Applications

The DAWG cannot have a directed cycle, as this would allow an inﬁnite set of words to spell out a path, and the set of subwords of t is ﬁnite. Therefore, it can be represented by a directed acyclic graph. A state is a sink if it has no outgoing edges. A sink must be the right-equivalence class containing position n, so there is exactly one sink. THEOREM 30.1 edges.

The DAWG for a text of length n has at most 2n − 1 nodes and 3n − 3

The number of nodes follows from Lemma 30.2. There is a single sink, namely, the one that has position set {|t|}, this represents the equivalence class containing those suﬃxes of t that have a unique occurrence in t. Let T be a directed spanning tree of the DAWG rooted at the start state. T has one fewer edges than the number of states, hence 2n − 2 edges. For every e ∈ T , let P1 (e) denote the path in T from the start state to the tail of e, let P2 (e) denote an arbitrary path in the DAWG from the head of e to the sink, and let P (e) denote the concatenation of (P1 (e), e, P2 (e)). Since P (e) ends at the sink, the labels of its edges yield a suﬃx of t. For e1 , e2 ∈ T with e1 = e2 , P (e1 ) = P (e2 ), since they diﬀer in their ﬁrst edge that is not in T . One suﬃx is given by the labels of the path in T to the sink. Each of the remaining n − 1 suﬃxes is the sequence of labels of P (e) for at most one edge e ∈ T , so there are at most n − 1 edges not in T . The total number of edges of the DAWG is bounded by 2n − 2 tree edges and n − 1 non-tree edges. ♦ Proof

To determine whether a string p occurs as a substring of t, one may begin at the start state and either ﬁnd the path that spells out the letters of p, thereby accepting p, or else reject p if there is no such path. This requires ﬁnding, at each node x, the transition labeled a leaving x, where a is the next letter of p. If |Σ| = O(1), this takes O(1) time, so it takes O(|p|) time to determine whether p is a subword of t. Note that, in contrast to naive approaches to this problem, this time bound is independent of the length of t. If the nodes of the DAWG are explicitly labeled with the corresponding end positions, as in Figure 30.1, then it is easy to ﬁnd the positions where a substring occurs: it is the label of the state reached on the substring. However, doing this is infeasible if one wishes to build the DAWG in O(|t|) time and use O(|t|) storage, since the sum of cardinalities of the position sets can be greater than this. For this problem, it is preferable to use the compact DAWG that is described below. For the problem of ﬁnding the number of occurrences of a substring in t, it suﬃces to label each node with the number of positions in its position set. This may be done in postorder in a depth-ﬁrst search, starting at the start node, and applying the following rule: the label of a node v is the sum of labels of its out-neighbors, which have already been labeled by the time one must label v. Handling v takes time proportional to the number of edges originating at v, which we have already shown is O(|t|).

30.3.1

A Simple Algorithm for Constructing the DAWG

If x is a substring of t, let us say that x’s redundancy in t in t is the number of ending (or beginning) positions it has in t. If i is a position in t, let h(i) be the longest substring x of t with an ending position at i whose redundancy is at least as great

DEFINITION 30.2

© 2005 by Chapman & Hall/CRC

String Searching

30-7

|t| as its length, |x|. Let h(t) be the average of h(i) over all i, namely ( i=1 h(i))/|t|. Clearly, h(t) is a measure of how redundant t is; the greater the value of h(t), the less information it can contain. In this section, we given an O(|t|h(t)) algorithm for constructing the DAWG of a string t. This is quadratic in the worst case, which is illustrated by the string t = an , consisting of n copies of one letter. However, we claim that the algorithm is a practical one for most applications, where h(t) is rarely large even when t has a long repeated substring. In most applications, h(t) can be expected to behave like an O(log|t|) function. The algorithm explicitly labels the nodes of the DAWG with their ending positions, as illustrated in Figure 30.1. Each set of ending positions is represented with a list, where the positions appear in ascending order. It begins by creating a start node, and then iteratively processes an unprocessed node by creating its neighbors. To identify an unprocessed node, it is convenient to keep a list of the unprocessed nodes, insert a node in this list, and remove a node from the front of the list when it is time to process a new node. Algorithm 30.2 DAWGBuild(t) Create a start node with position set {0, 1, ..., n} While there is an unprocessed node v Create a copy of v’s position set Add 1 to every element of this set Remove n + 1 from this copy if it occurs Partition the copy into sets of positions that have a common letter For each partition class W If W is already the position set of a node, then let w denote that node Else create a new node w with position set W Let a be the letter that occurs at the positions in W Install an edge labeled a from v to w Figure 30.4 gives an illustration. For the correctness, it is easy to see by induction on k that every substring w of the text that has length k leads to a node whose position set is the ending positions of w. LEMMA 30.3

The sum of cardinalities of the position sets of the nodes of the DAWG is

O(|t|h(t)). Proof For a position i, let N (i) be the number of ending position sets in which position i appears. By Lemma 30.1, position sets that contain i form a chain {X1 , X2 , ..., XN (i) }, where for each i from 1 to N (i)−1, |Xi | > |Xi+1 |, and a string with Xi as its ending positions must be shorter than one with Xi+1 as its ending positions. Therefore, |XN (i)/2 | ≥ N (i)/2, and any string with this set as its ending position set must have length at least (N (i)/2−1. This is a string whose set of ending positions is at least as large as its length, so N (i) = O(h(t)), |t| The sum of cardinalities of the position sets is given by i=0 N (i), since each appearance of i in a position set contributes 1 to the sum, and this sum is O(|t|h(T )). ♦

It is easy to keep the classes as sorted linked lists. When a class X is partitioned into smaller classes, these fall naturally into smaller sorted lists in time linear in the size of

© 2005 by Chapman & Hall/CRC

30-8

Handbook of Data Structures and Applications {0,1,...,10}

{0,1,...,10}

c

{4,7,10}

b

a {1,2,5,8,9}

{0,1,...,10}

{1,2,5,8,9} c

{4,7,10}

b

a {3,6}

c

b

{3,6}

a {2,9}

{10}

a a b c a b c a a c 1 2 3 4 5 6 7 8 9 10

FIGURE 30.4: Illustration of the ﬁrst three iterations of Algorithm 30.2 on aabcabcaac. Unprocessed nodes are drawn with dashed outlines. The algorithm initially creates a start state with position set {0, 1, ..., n} (left ﬁgure). To process the start node, it creates a copy of this position set, and adds 1 to each element, yielding {1, 2, ..., n + 1}. It discards n + 1, yielding {1, 2, ..., n}. It partitions this into the set {1, 2, 5, 8, 9} of positions that contain a, the set {3, 6} of positions that contain b, and the set {4, 7, 10} of positions that contain c, creates a node for each, and installs edges labeled with the corresponding letters to the new nodes (middle ﬁgure). To process the node v labeled {1, 2, 5, 8, 9}, it adds 1 to each element of this set to obtain {2, 3, 6, 9, 10}, and partitions them into {2, 9}, {3, 6}, and {10}. Of these, {2, 9} and {10} are new position sets, so a new node is created for each. It then installs edges from v to the nodes with these three position sets. X. A variety of data structures, such as tries, are suitable for looking up whether the sorted representation of a class W already occurs as the position set of a node. The time is therefore linear in the sum of cardinalities of the position sets, which is O(|t|h(t)) by Lemma 30.3.

30.3.2

Constructing the DAWG in Linear Time

The linear-time algorithm given in [1] to construct the DAWG works incrementally by induction on the length of the string. The DAWG of a string of length 0 (the null string) is just a single start node. For k = 0 to n − 1, it iteratively performs an induction step that modiﬁes the DAWG of t[1 : k] to obtain the DAWG of t[1 : k + 1]. To gain insight into how the induction step must be performed, consider Figure 30.5. An occurrence of a substring of t can be speciﬁed by giving its ending position and its length. For each occurrence of a substring, it gives the number of times the substring occurs up to that point in the text, indexed by length and position. For instance, the string that has length 3 and ends at position 5 is bca. The entry in row 3, column 5 indicates that there is one occurrence of it up through position 5 of the text. There is another at position 8, and the entry at row 3 column 8 indicates that it his two occurrences up through position 8. The lower ﬁgure, which we may call the incremental landscape, gives a simpliﬁed representation of the table, by giving an entry only if it diﬀers from the entry immediately above it. Let L[i, j] denote the entry in row i, column k of the incremental landscape. Some of

© 2005 by Chapman & Hall/CRC

String Searching

30-9

these entries are blank; the implicit value of such an entry is the value of the ﬁrst non-blank entry above it. Ending position 0 10 9 8 7 Length 6 5 4 3 2 1 0 1

1

2

3

4

5

6

7

8

1 1 1 1 2 2 7 b

1 1 1 1 2 2 2 8 c

1 1 1 1 2 2 2 4 9 a

Number of occurrences

1 1 1 1 2 1 2 3 4 a a b

1 1 1 1 5 c

1 1 1 1 3 6 a

9 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 5 3 10 11 a c

FIGURE 30.5: Displaying the number of occurrences of substrings in a text. In the upper ﬁgure, the entry in row i column j corresponds to the substring of length j that ends at position i in the text t, and gives the number of occurrences of the substring at position i or before. That is, it gives the number of occurrences of the substring in t[1 : i]. Row 0 is included to reﬂect occurrences of the null substring, which has occurrences at {0, 1, ..., n}.

Ending position 0 10 9 8 7 Length 6 5 4 3 2 1 0 1

1

2

3

4

5

6

Number of occurrences

1

8 1

9 10 1 1

1 1

1

7

1 2

2

2 1 2 1 2 3 4 5 3 2 3 4 5 6 7 8 9 10 11 a a b c a b c a a c

FIGURE 30.6: The incremental landscape is a simpliﬁcation of the table of Figure 30.5, where an entry is displayed only if it diﬀers from the entry above it. The entries in column i are right-equivalence classes of t[1 : i]. These are right-equivalence classes that may be aﬀected during the induction step, when the DAWG of t[1 : i − 1] is modiﬁed to obtain the DAWG of t[1 : i]. Equivalence classes of t[i : 1] that are not right-equivalence classes in t[1 : i] are circled; these correspond to nodes of the DAWG that must be created during the induction step. Edges of the DAWG of t[1 : i] from classes in column i − 1 are depicted as arrows. (The distinction between solid and dashed arrows is used in the proof of Theorem 30.4.)

© 2005 by Chapman & Hall/CRC

30-10

Handbook of Data Structures and Applications

Column k has one entry for each right-equivalence class of t[1 : k] that has k as an ending position. For instance, in column 8, we see the following: 1. L[0, 8]: A right-equivalence class for the suﬃx of t[1 : 8] of length 0, namely, the empty string, which has 9 occurrences ({0, 1, ..., 8}) in t[1 : 8]. 2. L[1, 8]: A right-equivalence class for the suﬃx of t[1 : 8] of length 1, namely, the suﬃx a, which has four occurrences ({1, 2, 5, 8}) in t[1 : 8]. 3. L[4, 8]: A right-equivalence class for suﬃxes of t[1 : 8] of lengths 2 through 4, namely, {ca, bca, abca}, which have two occurrences ({5, 8}) in t[1 : 8]. The longest of these, abca, is given by the non-blank entry at L[4, 8], and membership of the others in the class is given implicitly by the blank entries immediately below it. 4. L[8, 8]: A right-equivalence class for suﬃxes of t[1 : k] of lengths 5 through 8, namely, {cabca, bcabca, abcabca, abcabca} that have one occurrence in t[1 : 8]. We may therefore treat non-blank entries in the incremental landscape as nodes of the DAWG. Let the height of a node denote the length of the longest substring in its rightequivalence class; this is the height (row number) where it appears in the incremental landscape. When modifying the DAWG of t[1 : k] to obtain the DAWG of t[1 : k + 1], all new nodes that must be added to the DAWG appear in column k + 1. However, not every node in column k + 1 is a new node, as some of the entries reﬂect nodes that were created earlier. For instance, consider Figure 30.7, which shows the incremental step from t[1 : 6] to t[1 : 7]. One of the nodes, which represents the class {cabc, bcabc, abcabc, aabcabc} of substrings of t[1 : 7] that are not substrings of t[1 : 6]. It is the top circled node of column 7 in Figure 30.6. Another represents the class Z2 = {c, bc, abc}. This appears in L[3, 7]. To see why this is new, look at the previous occurrence of its longest substring, abc, which is represented by L[3, 4], which is blank. Therefore, in the DAWG of t[1 : 6], it is part of a right-equivalence Z, which appears at L[4, 4], and which contains a longer word, aabc. Since {c, bc, abc} are suﬃxes of t[1 : 7] and aabc is not, they cease to be right-equivalent in t[1 : 7]. Therefore, Z must be split into two right-equivalence classes, Z2 = {c, bc, abc} and Z1 = Z − Z2 = {aabc}. Let us call this operation a split. Let us say that a node is new in column k if it is created when the DAWG of t[1 : k] is modiﬁed to obtain the DAWG of t[1 : k + 1]. In Figure 30.6, a node in a column is circled if it is new in that column. In general, a node is new in column k iﬀ it is the top node of the column or the previous occurrence of its longest member corresponds to a blank space in the incremental landscape. An important point is that only the top two nodes of a column can be new: LEMMA 30.4 column.

If a new node is the result of a split, only one node lies above it in its

Let a be the character that causes the split, and let xa be the largest string in Z2 , and let bxa be the smallest string in Z1 = Z − Z2 . Since bxa previously had the same set of ending positions as xa and now it does not, it must be that xa occurs as a suﬃx of tk , but bxa does not. Let cxa be the smallest string in the next higher class C in column k + 1. On all previous occurrences of xa, it was inside bxa, so the ﬁrst occurrence of cxa is at position k + 1. The frequency of the strings in C must be 1, so C is the top class of the column. ♦ Proof

© 2005 by Chapman & Hall/CRC

String Searching {0,1,...,6}

c

b

a {1,2,5}

b

30-11

{3,6}

a {2}

b

{0,1,...,7}

{3} c

c

{1,2,5}

b

{3,6}

{4} a

c

b

{6}

{4,7} a

a {2}

{5} b

a a b c a b c a a c 1 2 3 4 5 6 7 8 9 10

Z2 = {c, bc, abc}

b

a

Z = {c, bc, abc, aabc}

c

{3} c

{4} a

{5} b

Z1 = {aabc}

{6} c

{7} {cabc, bcabc, abcabc, aabcabc}

FIGURE 30.7: Modifying the DAWG of t[1 : 6] = aabcab to obtain the DAWG of t[1 : 7] = aabcabc. New nodes are shown with bold outlines. The sixth column of the incremental landscape, from top to bottom, consists of the nodes {6}, {3, 6}, and the start node. The seventh column, from top to bottom, consists of {7}, {4, 7}, and the start node. The node {4, 7} is split from {4}; of the strings {c, bc, abc, aabc} that end at node {4}, only {c, bc, abc} also occur at position 7, so these must now be handled by a diﬀerent node from the one that handles aabc. All edges from nodes in the previous column to {4} are redirected to the new node {4, 7}. The foregoing shows how nodes must be added to the DAWG in the inductive step. In order to understand how the edges of the DAWG must be modiﬁed, note that every edge directed into a node in column k + 1 comes from a node in column k. These edges are given by the following rule: In the DAWG of t[1 : k + 1], a node of height i in column k has an edge labeled tk+1 to the lowest node of column k + 1 that has height greater than i.

LEMMA 30.5

These edges are drawn in as solid and dashed arrows in Figure 30.6. According to the ﬁgure, when the DAWG of t[1 : 7] is obtained from t[1 : 6], the new top node in the column must have an incoming edge from the top node of column 6, which is labeled {6} in Figure 30.7. The second new node in column 7, which is labeled {4, 7} in the ﬁgure, must have edges from the nodes at L[0, 6] and L[2, 6], which are the source and the node labeled {3, 6}. These are obtained by diverting edges into Z. The induction step consists of implicitly marching in parallel down columns k and k + 1, creating the required nodes in column tk+1 and installing the appropriate edges from rightequivalence classes in column k to right-equivalence classes of column k + 1, as well as the appropriate outgoing edges and parent pointers on each right-equivalence class in column k + 1 that is new in tk+1 . The new nodes in column k + 1 are the one with frequency one, and possibly one other, Z2 , that results from a split. By Lemma 30.4, this requires marching down through at most two nodes of column k + 1, but possibly through many

© 2005 by Chapman & Hall/CRC

30-12

Handbook of Data Structures and Applications

nodes of column k. To facilitate marching down a column k eﬃciently, the algorithm needs a suﬃx pointer Suffix(x) on each node x of column k to the next lower node in column k. If y = y1 y2 y3 ...yj is the shortest string in the x’s right-equivalence class, then Suffix(x) points to the rightequivalence class that contains the longest proper suﬃx y2 y3 ...yj of y. The suﬃx pointer for each node is uniquely deﬁned, so the algorithm ensures that suﬃx pointers are available on nodes of column k by keeping suﬃx pointers current on all nodes of the DAWG. The induction step is given in Algorithm 30.3. The algorithm does not build the incremental landscape. However, we may identify the nodes by where they would go in the incremental landscape. The meanings of the variables can be summarized as follows. Topk is the top node of column k, and Topk+1 is the top node of column k + 1. Mid denotes the highest node of column k that already has an outgoing labeled with the (k + 1)th letter. The variable curNode is a looping variable that travels down through nodes of column k, becoming undeﬁned if it travels past the bottom node of the column. Algorithm 30.3 Update(Topk ): Update the DAWG of t[1 : k] to obtain the DAWG of t[1 : k + 1]. Create a node Topk+1 of frequency 1 and height k + 1 Let curNode = Topk . While curNode is deﬁned and has no outgoing edge labeled tk+1 Install an edge labeled tk+1 from curNode to Topk+1 . curNode := Suffix(curNode) If curNode is deﬁned Mid := curNode Let Z be the neighbor of Mid on tk+1 Deﬁne Suffix(Topk+1 ) to be Z If height(Z) > height(Mid) + 1 Split(k, Mid, Z); Create a second new node in Column k + 1 Else deﬁne Suffix(Topk+1 ) to be the start node Return T opk+1

Procedure Split(k, Mid, Z) Create a copy Z2 of the node representing Z, together with its outgoing edges Let the height of Z2 be one plus the height of Mid Let curN ode = Mid While curNode is deﬁned and Z is its neighbor on tk+1 Divert curNode’s edge labeled tk+1 so that it points to Z2 curNode := Suffix(curNode) Redeﬁne Suffix(Z2 ) to be Suffix(Z) Redeﬁne Suffix(Z) to be Z2

THEOREM 30.4 Proof

It takes O(|t|) time to build the DAWG of a text t of length n.

No node is ever discarded once it is created, and the ﬁnal DAWG has O(|t|) nodes.

© 2005 by Chapman & Hall/CRC

String Searching

30-13

Therefore, the cost of creating nodes is O(|t|). Once an edge is created it remains in the DAWG, though it might be diverted in calls to Split. No edge is ever discarded and the ﬁnal DAWG has O(|t|) edges, so the cost of creating edges is O(|t|). It remains to bound the cost of diverting edges in calls to Split. Let an edge that appears in the incremental landscape be solid if it goes from a node of height i to one of height i + 1, and dashed otherwise. (See Figure 30.6.) We may partition the edges in the landscape into terminating paths, each of which starts in row 0, and contains zero or more solid edges, and either followed by a dashed edge or ending in the last column. At most one terminating path begins in any column, and every dashed edge terminates a path. Thus, there are at most n dashed edges. When Z2 is created in Split, at most one of the edges diverted into it is solid. The cost of diverting this edge is subsumed in the cost of creating Z2 . The cost of diverting other edges is O(|t|) over all calls to Split, since each of them is one of the at most n dashed edges that appear in the incremental landscape. ♦

30.4

The Compact DAWG

By Theorem 30.1 and Lemma 30.3, we cannot assume that the DAWG requires linear space if the nodes are explicitly labeled with their position sets. The algorithm for building the DAWG in linear time does not label the nodes with their position sets. However, without the labels, it is not possible to use the DAWG to ﬁnd the k locations where a substring p occurs in t in O(|p| + k) time. One remedy for this problem is to label a node with a position i if it represents the smallest position set that contains i as a member. The total number of these labels is n. We can reverse the directions of the suﬃx pointers that are installed during the DAWG construction algorithm, yielding a tree on the position sets. If a node represents a set X of positions, the members of X can be returned in O(|X|) time by traversing the subtree rooted at X, assembling a list of these labels. (This tree is isomorphic to the suﬃx tree of the reverse of the text, but there is no need to adopt the common practice of labeling each of its edges with a string.) Another alternative, which has considerable advantage in space requirements over the suﬃx tree, is to “compact” the DAWG, yielding a smaller data structure that still supports a query about the positions of a substring O(|p| + k) time. The algorithm for compacting it runs in O(|t|) time. If x is a substring of t, let α(x) denote the longest string y such every ending position of x is also an ending position of yx. That is, y is the maximal string that precedes every occurrence of x in t. Note that α(x) may be the null string. Similarly, let β(x) denote the longest string z such that every starting position of x is a starting position of xz. This is the longest string that follows every occurrence of x. For instance, if t = aabcabcaac and x = b, then α(x) = a and β(x) = ca. LEMMA 30.6

1. For x and y in a right-equivalence class, α(x)x = α(y)y is the longest string in the class. 2. For x and y in a right-equivalence class, β(x) = β(y). Let a substring x of t be prime if α(x) and β(x) are both the empty string.

© 2005 by Chapman & Hall/CRC

For any

30-14

Handbook of Data Structures and Applications

substring x of t, α(x)xβ(x) is prime; this is the prime implicant of x. If x is prime, it is its own prime implicant. DEFINITION 30.3 The compact DAWG of a text t is deﬁned as follows. The nodes are the prime substrings of t. If x is a prime substring, then for each a ∈ Σ such that xa is a substring of t, let y = α(xa) and z = aβ(xa). There is an edge labeled z from x to the prime implicant yxz of xa.

If a right-equivalence class contains a prime substring x, then x is the longest member of the class. Stretching the terminology slightly, let us call a class prime if it contains a prime substring. If C is a right-equivalence class in t, we may deﬁne β(C) = β(x) such that x ∈ C. By Part 2 of Lemma 30.6, β(C) is uniquely deﬁned. We may deﬁne C’s prime implicant to be the right-equivalence class D that contains xβ(x) for x ∈ C. D is also uniquely deﬁned and contains the prime implicant of the members of C. The nodes of the DAWG may therefore be partitioned into groups that have the same prime implicant. This is illustrated in Figure 30.8.

c

{0,1,...,10} a {1,2,5,8,9} c

{4,7,10} a

b b

{3,6}

c

{4,7}

a

{5,8}

a b

a {2,9} b

{3} c

{4} a

{5} b

{6} c

{7} a

{8} a

{9} c

{10}

c

a a b c a b c a a c 1 2 3 4 5 6 7 8 9 10

FIGURE 30.8: Partition of nodes into groups with the same prime implicant.

LEMMA 30.7 A right-equivalence class is non-prime if and only if it has exactly one outgoing edge in the DAWG.

We now describe how to obtain the compact DAWG from the DAWG in linear time. For ease of presentation, we describe how to carry it out in four depth-ﬁrst traversals of the DAWG. However, in practice, only two depth-ﬁrst traversals are required, since the operations of the ﬁrst three traversals can be carried out during a single depth-ﬁrst traversal. In the ﬁrst depth-ﬁrst traversal, we may label each class with a single position from its set of ending positions. This is done in postorder: when retreating from a node, copy its label from the label of any of its successors, which have already been labeled, and subtract

© 2005 by Chapman & Hall/CRC

String Searching

30-15

1 from it. By Lemma 30.7, the prime implicant of a class is the class itself if it is prime; otherwise, it is the unique successor that is prime. Let the distance to its prime implicant be the length of this unique path. In postorder during the second traversal, we may label each node with a pointer to its prime implicant and label this pointer with the distance to the prime implicant. If the class C is a sink or has more than one outgoing edge, this is just a pointer from C to itself with distance label 0. Otherwise, C has a unique successor D, which is already labeled with a pointer to D’s prime implicant A with distance label i. Label C with a pointer to A with distance label i + 1. In the third traversal, we install the compact DAWG edges. If we label the edges explicitly with their string labels, we will exceed linear time and storage. Instead, we may take advantage of the fact that the label of every edge is a substring of t. We label each edge with the length of its label. (See Figure 30.9.) When retreating from a prime node B during the traversal, for each DAWG edge (BC) out of B, let D be C’s prime implicant, let i be the distance of D from C. Install a compact DAWG edge from B to D that has length label i + 1.

2

0 1

3 1

3

2

5

1

5 2

10

1 8 1 a a b c a b c a a c 1 2 3 4 5 6 7 8 9 10

FIGURE 30.9: Representing the edge labels of the compact DAWG. (Compare to Figure 30.2.) Each edge label is a substring of t with end positions at the end position labels of the principal nodes. The label of the edge can therefore be represented implicitly, by labeling each node with one member of its position set, and labeling each edge with the length of its label. For instance, the edge labeled 3 from the source to the node labeled “5” is labeled with the substring of length 3 that ends at position 5, hence, the one occupying positions 3, 4, and 5 of the text. Since the text can be randomly accessed, the text can be used to look up the label of the edge. This ensures that the edge labels take O(|t|) space, since they take O(1) for each node and edge.

On the ﬁnal traversal, we may remove the DAWG nodes, DAWG edges, and the prime implication pointers.

© 2005 by Chapman & Hall/CRC

30-16

30.4.1

Handbook of Data Structures and Applications

Using the Compact DAWG to Find the Locations of a String in the Text

Let v be a node of the compact DAWG, and let x be the corresponding prime implicant. Let the total length of a path from v to the sink be the sum of the length labels of the edges on the path. Observe that there is a path of total length i from v to the sink iﬀ x has an ending position at n − i + 1. Let x be a prime substring of t, and let k be the number of occurrences of x in t. Given x’s node in the compact DAWG of t, it takes O(k) time to retrieve the ending positions of x in t.

LEMMA 30.8

Proof Recursively explore all paths out of the node, and whenever the sink is encountered, subtract the total length of the current path from n + 1 and return it. The running time follows from the following observations: One position is returned for each leaf of the recursion tree; the sets of positions returned by recursive calls are disjoint; and every internal node of the recursion tree has at least two children since every node of the compact DAWG has at least two outgoing edges. ♦

The representation of Figure 30.9 is therefore just as powerful as that of of Figure 30.2: the edge labels are implied by accessing t using the numbers on edges and nodes, while the position labels of the vertices can be retrieved in linear time by the algorithm of Lemma 30.8. The representation of Figure 30.9 now gives an O(|p| + k) algorithm for ﬁnding the k occurrences of a substring p in a text t. One must index into the compact DAWG from the source, matching letters of p with letters of the implicit word labels of the compact edges. If a letter of p cannot be matched, then p does not occur as a subword of t. Otherwise, p is the concatenation of a set of word labels on a path, followed by part of the word label of a ﬁnal edge (u, v). This takes O(|p|) time. Let i be the number of remaining unmatched letters of the word label of (u, v). The k ending positions of p are given by subtracting i from the k ending positions of v, which can be retrieved in O(k) time using the algorithm of Lemma 30.8. For instance, using the compact DAWG of Figure 30.2 to ﬁnd the locations where abc occurs, we match a to the label a of an edge out of the source to the node with position set {1, 2, 5, 8, 9}, then bc to the word label of the edge to the node labeled {5, 8}. Though the node is labeled with the position set in the picture, this position set is not available in the linear-space data structure. Instead, we ﬁnd two paths of length 2 and 5 from this node to the sink, and subtracting 2 and 5 from n = 10 yields the position set {5, 8}. Then, since one letter in the word label bca remains unmatched, we subtract 1 from each member of {5, 8} to obtain {4, 7}, which is the desired answer.

30.4.2

Variations and Applications

In [1], a variation of the compact DAWG is given for a collection {t1 , t2 , ..., tk } of texts, and can be used to ﬁnd the k occurrences of a string p in the texts in O(|p| + k) time. That paper also gives a symmetric version of the compact DAWG. By the symmetry in the deﬁnition of the prime subwords of t, the set of prime subwords of the reversal of t are given by reversing the set of prime subwords of t. The compact DAWG of t and of the reversal of t therefore have essentially the same set of nodes; only the edges are aﬀected by the reversal. The symmetric version has a single set of nodes and two sets of edges,

© 2005 by Chapman & Hall/CRC

String Searching

30-17

one corresponding to the edges of the compact DAWG of t and one corresponding to the edges of the reversal of t. The utility of this structure as a tool for exploring the subword structure of t is described in the paper. Another variant occurs when t is a cyclic ordering of characters, rather than a linear one. A string p has an occurrence anywhere where it matches the subword contained in an interval on this cycle. A variant of the DAWG, compact DAWG, and compact symmetric DAWG for retrieving occurrences of subwords for t in this case is given in [1]. The paper gives algorithms that have time bounds analogous to those given here. Variations of landscapes, such as that of Figure 30.6 are explored in [2]. They give a graphical display of the structure of repetitions in a text. The suﬃx tree can be used to ﬁnd the longest common substring of two texts t1 and t2 eﬃciently. The paper gives O(|t|h(t)) algorithms that use the DAWG to generate the landscape of t (see Deﬁnition 30.2), which can be used to help identify functional units in a genomic sequence. One variation of the landscape explored in the paper inputs two texts t1 and t2 , and gives a graphical display of the number of occurrences of every substring of t1 in t2 , which has obvious applications to the study of evolutionary relationships among organisms. Mehta and Sahni give a generalization of the compact DAWG and the compact symmetric DAWG to circular sequences is given in [6], and give techniques for analyzing and displaying the structure of strings using the compact symmetric DAWG in [7, 8].

30.5

The Position Heap

We now give a data structure that gives much simpler algorithms, at a cost of slightly increasing the worst-case time required for a query. The algorithms can easily be programmed by undergraduate data-structures students. The data structure is a trie, and has one node for each position in the text. The data structures and algorithms can be modiﬁed to give the same bounds for construction and searching, but this undermines the principal advantages, which are simplicity and low memory requirements. The data structure is closely related to trees that are used for storing hash keys in [3].

30.5.1

Building the Position Heap

Let a string be represented by a trie if it is the label of a path from the root in the trie. For analyzing the position heap us adopt the convention of indexing the characters of t in descending order, so t = tn tn−1 ...t1 . In this case, we let t[i : j] denote ti ti−1 ...tj . The algorithm for constructing the position heap can be described informally as follows. The positions of t are visited from right to left as a trie is built. At each position i, a new substring z is added to the set of words represented by the trie. To do this, the longest preﬁx t[i : j] of t[i : 1] that is already represented in the trie is found by indexing into the trie from the root, using the leading letters of t[i : 1], until one can advance no further. A leaf child of the last node of this path is added, and the edge to it is labeled ti+1 . The procedure, PHBuild, is given in Table 30.1. Figure 30.10 gives an illustration.

30.5.2

Querying the Position Heap

Table 30.2 gives a procedure, PHFind, to ﬁnd all starting positions of p in t, and Figure 30.11 gives an illustration. The worst-case running time of O(|p|2 + k) to ﬁnd the k occurrences of p is worse than the O(|p| + k) bound for the suﬃx tree or DAWG.

© 2005 by Chapman & Hall/CRC

30-18 TABLE 30.1

Handbook of Data Structures and Applications Constructing the position heap for a string t = ti ti−1 ...t1 .

PHBuild(t, i) If i = 1 return a single tree node labeled 1 Else Recursively construct the position heap H for the suﬃx t[i − 1, 1]. Let t = t[i : k] be the maximal preﬁx of t that is the label of a path originating at the root in the tree. Let u be the last node of this path. Add a child of u to the tree on edge labeled tk−1 , and give it label i.

10 9 8 7 6 5 4 3 2 1 b b a b b b a a b a

a

1

b 2

3 a 4

b 8

a

b

5 b

a 9

6 b 7

10 FIGURE 30.10: Construction of the position heap with PHBuild (Table 30.1). The solid edges reﬂect the recursively-constructed position heap for the suﬃx t[9 : 1] of t. To get the position heap for t[10 : 1], we use the heap to ﬁnd the largest preﬁx bb of t[10 : 1] that is the label of a path in the tree, and add a new child at this spot to record the next larger preﬁx bba. TABLE 30.2

Find all places in a text t where a substring p occurs, given the position heap H for t.

PHFind(p, t, H) Let p be the maximal preﬁx of p that is the label of a path P from the root of H. S1 be the set of position labels in P . Let S2 be the subset of S1 that are the positions of occurrences of p in t. If p = p then let S3 be the empty set Else let S3 be the position labels of descendants of the last node of P . Return S2 ∪ S3 .

LEMMA 30.9

PHFind returns all positions where p occurs in t.

© 2005 by Chapman & Hall/CRC

String Searching

30-19

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 T: a b a a a b a b b a b a a b a Search strings: aba and baba 1 a

b

3 a 4 a 13

b

a 5

6 b

a 12 11 a 15

2 b

b 9

8

a b 14 7 b 10

FIGURE 30.11: Searching for occurrences of a string in the text t in O(|p|2 + k) time with PHFind (Table 30.2). How the search is conducted depends on whether the search string is the path label of a node in the position heap. One case is illustrated by search string aba, which is the path label of position 11. The only places where aba may match t are at positions given by ancestors and descendants of t. The descendants {11, 15} do not need to be veriﬁed, but the proper ancestors {1, 3, 6} must be veriﬁed against t at those positions. Of these, only 3 and 6 are matches. The algorithm returns {3, 6, 11, 15}. The other case is illustrated by baba, which is not the path label of a node. Indexing on it yields position 7 and path label bab = baba. Only the ancestors {2, 5, 7} are candidates, and they must be veriﬁed against t. Of these, only 7 is a match. The algorithm returns {7}. Since the ancestor positions occur on the search path, there are O(|p|) of them, and each takes O(|p|) time to verify each of them against t. Descendants can be more numerous, but take O(1) time apiece to retrieve and return, since they do not need to be veriﬁed. Let p = p1 p2 ...pm and let t = tn tn−1 ...t1 . Suppose that i is a position in t where p does not occur. Then i ∈ S2 . Any node u with position label i has a path label that is a preﬁx of t[i : 1]. Since p is not a preﬁx of this string, it is not a preﬁx of the path label of u, so i ∈ S3 . We conclude that i is not among the positions returned by PHFind. Next, let h be the position of an occurrence of p. Let x = p[1 : j] be the maximal preﬁx of p that is represented in the position heap of t[h − 1 : 1], where j = 0 if x = λ. If x = p, then PHBuild created a node with position label h and path label xpj+1 . This is a preﬁx of p, so h ∈ S1 , and, since p occurs at position h, h ∈ S2 . If x = p, let y = t[h : k] be the largest preﬁx of t[h : 1] that is active in t[h − 1 : 1]. Then PHBuild created a node with position label h and path label ytk−1 , and h ∈ S3 . In either case, h is returned as a position where P occurs. ♦ Proof

© 2005 by Chapman & Hall/CRC

30-20

30.5.3

Handbook of Data Structures and Applications

Time Bounds

LEMMA 30.10

PHFind takes O(|p|2 +k) worst-case time time to return the k occurrences

of p in t. Proof The members of S3 can be retrieved in O(1) time apiece using a depth-ﬁrst traversal of the subtree rooted at the last node on path P . Since all nodes of S1 occur on a path whose label is a preﬁx of p, there are at most m + 1 members of S1 . Checking them against t to see which are members of S2 takes O(|p|) time apiece, for a total of O(|p|2 ) time in the worst case. ♦

This time bound overstates what can be expected in practice, since, in most cases, the string is known to match on a preﬁx, but there is no reason to expect that it will be similar to the position that it is supposed to match in the region beyond this preﬁx. A good heuristic is to match the string from the end, rather than from the beginning, since the string has a preﬁx that is already known to match at the position. Checking to see whether a string matches at a given position will usually require examining one or two characters, discovering a mismatch, and rejecting the string. LEMMA 30.11

PHBuild takes O(|t|h(tR )) time.

If P = (v0 , v1 , ..., vk ) be a path from the root v0 in the position heap, let P1 = (v0 , v1 , ..., vk/2 ), and let P2 = (vk/2+1 , vk/2+2 , ..., vk ) be the remainder of the path. Let i be the position label of vk , and let h (i) denote the length of the maximum preﬁx x of t[i : 1] that occurs at least |x| times in t. The path label y of P1 has an occurrence at the positions labels of each of its descendants, including those on P2 , of which there are at least |y|. Therefore, Therefore, |y| = O(h (i)). The time spent by the algorithm at position i of t is proportional to the length of P , which is O(|y|). Therefore, the time spent by the algorithm adding the node for position i is O(h (i)), hence the time to build the whole heap R is O( |t| i=1 h (i)) = O(|t|h(t )) by Deﬁnition 30.2. Proof

As with the O(|t|h(t)) algorithm for building the DAWG, this time bound is a practical one in most settings, since h(t) is relatively insensitive to long repeated strings or localized areas of the string with many repetitions. Only strings where most areas of the string are repeated many times elsewhere have high values of h(t), and h(t) can be expected to behave like an O(log n) function in most settings.

30.5.4

Improvements to the Time Bounds

In this section, we have given an algorithm for constructing the position heap to O(|t|). We also sketch an approach for ﬁnding the occurrences of a string p in t to O(|p| + k) using position heaps. Each of these have tradeoﬀ costs, such as having greater space requirements and being harder to understand. The position heap has a dual, which we may call the dual heap (see Figure 30.12). They have the same node set: a node has path label x in the heap iﬀ its path label in the dual is the reversal xR of x. We will refer to the position heap as the primal heap when we wish to contrast it to the dual.

© 2005 by Chapman & Hall/CRC

String Searching

30-21

It is tempting to think that the dual is just the position heap of the reversal tR of t, but this is not the case. As in the primal heap, the rightmost positions of t are near the root of the dual, but in the primal heap of tR , the leftmost positions of t are near the root. In the primal heap of tR the heap order is inverted, which aﬀects the shape of the tree. Neither the primal nor the dual heap of t is necessarily isomorphic to the primal or dual heap of tR .

7 6 5 4 3 2 1 a b b a b b b

a

1

b

a 2 b

4 b 7

a

3

5 a 6

(primal) position heap

4 b 5

0 1

b 2 b

a 7

3

b 6 dual heap

FIGURE 30.12: The position heap and the dual heap of the string abbabbb. The node set of both heaps is the same, but the label of the path leading to a node in the dual heap is the reverse of the label of the path leading to it in the position heap. For PHBuild, the bottleneck is ﬁnding the node u whose path label is t = ti ti+1 ...tk . The dual heap allows us to carry out this step more eﬃciently. We get an O(|t|) time bound for constructing the position heap by simultaneously constructing the position heap and its dual. It is also necessary to label each node v with its depth dv during construction, in addition to its position label, pv . This gives a compact representation of the path label of v if v is not the root: it is t[pv : pv − dv + 1]. During construction, the primal edges are directed from child to parent, while the dual edges are directed from parent to child. The modiﬁed procedure, FastPHBuild, is given in Table 30.3. LEMMA 30.12

FastPHBuild is correct.

The path label of v is t[i − 1 : i − 1 − dv + 1] = t[i − 1 : i − dv ]. Let d = dw be the depth of w. Since w is an ancestor of v, its path label is a preﬁx of this, so w’s path label is t[i − 1 : i − d]. Since v is the parent of w, the path label of v is the next shorter preﬁx, t[i − 1 : i − d + 1]. The path label of v in the dual is the reversal of this, and since u is reachable on the dual edge out of v that is labeled ti , the path label of u is the reversal of t[i : i − d + 1] in the dual, hence t[i : i − d + 1] in the primal heap. Since w has no child labeled ti in the dual, there is no node whose path label in the dual is the reversal of t[i : i − d], hence no node whose path label is t[i : i − d] in the primal heap. Therefore, u has path label t[i : i − d + 1] and has no child in the primal graph on ti−d . Proof

© 2005 by Chapman & Hall/CRC

30-22

Handbook of Data Structures and Applications

TABLE 30.3 Construct the position heap H and its dual D for a string t[i : 1]. Return (H, D, y), where y is a pointer to the node with position label i.

FastPHBuild (T, i) If i = 1, return a single tree node labeled 1 Let (H , D , v) = FastPHBuild(t, i − 1) Search upward from v in H to ﬁnd the lowest ancestor v of v that has a child u on edge labeled ti in the dual. Let w be the penultimate node on this path. Let d = dw be the depth of w in the heap Create a new child y of u in the position heap on edge labeled ti−d Make y be the child of w in the dual on edge labeled ti . Give y position label i. Give y depth label dy = d + 1 Return the modiﬁed position heap, the modiﬁed dual, and y.

It follows that updating the primal heap to reﬂect t[i : 1] requires adding a new child y labeled ti−d2 to u in the primal heap. Since w’s path label is the longest proper suﬃx of y’s path label, w must be the parent of y in the dual. Since its depth is one greater than w’s, dy = d + 1. ♦ LEMMA 30.13

FastPHBuild takes O(|t|) time.

The inductive step takes O(1) time, except for the cost of searching upward from v to ﬁnd v . Let k be the distance from v to v and let k = k − 1. The cost of searching upward is O(k). The depth of the new node y is dv + 2, so it is dv − k + 2 ≤ dv + 1. Since v is the node added just before y, the depth of each successive node added increases by at most one and decreases by Θ(k). The total increases are O(|t|), so the sum of k’s over all recursive calls is bounded by this, hence also O(|t|). ♦ Proof

On tests we have run on several-megabyte texts, FastPHBuild is noticeably faster than PHBuild. This advantage must be weighed against the fact that the algorithm is slightly more diﬃcult to understand, and uses more memory during construction, to store the dual edges. By contrast, the algorithm we describe next for ﬁnding the positions of p in t in O(|p| + k) time is unlikely to compete in practice with PHFind, since the worst case bound of O(|p|2 + k) for PHFind overstates the typical case. However, it is interesting from a theoretical standpoint. Let # be a character that is not in Σ. Let t#t denote the concatenation of two copies of t with the special character # in between. To obtain the time bound for PHFind, we may build the position heap of t#t in O(|t|) time using FastPHBuild. Index the positions from |t| to −|t| in descending order. This gives 0 as the position of the # character (see Figure 30.13). To ﬁnd the starting positions of p in t, it suﬃces to ﬁnd only its positive starting positions in t#t. Suppose that there is a path labeled p that has at most one node with a positive position number. Finding the last node v of the path takes O(|p|) time, and all k positive

© 2005 by Chapman & Hall/CRC

String Searching

30-23

T:

12 11 10 9 8 7 6 5 4 3 2 1 a b b a b b a b b a b a

T#T:

12 11 10 9 8 7 6 5 4 3 2 1 a b b a b b a b b a b a

0 #

−1 −2 −3 −4 −5 −6 −7 −8 −9 −10−11−12

a b b a b b a b b

a b a

−12 a

b

# −11

−10 b

#

a

−7 a

1

#

a

−6

2

a b

6

7

a

9

−5 b

b

4 b

12

−8

b

−4 a −1

b

−9

b

3

0

−3

a 10

5 b

−2 b

a 11

8

a

FIGURE 30.13: Finding occurrences of p in t in O(|p| + k) time, using a position heap. Because of the extra memory requirements and the good expected performance of the O(|p|2 + k) approach, the algorithm is of theoretical interest only. The trick is to build the position heap of t#t, indexing so that positions in the second occurrence are indexed with negative numbers. To ﬁnd the occurrences of p in t, it suﬃces to return only its positive positions in t#t. Indexing into the heap is organized so that positive positions are descendants of nodes that are indexed to. Negative occurrences, which are ancestors, do not need to be veriﬁed against the text, eliminating the Θ(|p|2 ) step of the simpler algorithm. starting positions are descendants. We can retrieve them in O(k) time. Since we are not required to ﬁnd negative position numbers where p occurs, we do not have the Θ(|p|2 ) cost of ﬁnding which ancestors of v are actual matches. This gives an O(|p| + k) bound in this case. Otherwise, the problem can be solved by chopping p into segments {x1 , x2 , ..., xk } such that each xi is the label of a path from the root in the heap that has exactly one node vi with a positive position number, namely, the last node of the path. Every positive position of xi is matched by a negative position, which must correspond to an ancestor of vi . Since there are at most |xi | ancestors of vi , vi has at most |xi | (positive) descendants, which can be retrieved in O(|xi |) time. To see that this implies an O(|p|) time bound to return all occurrences of p in t, the reader should ﬁrst note that a family F of k sets X1 , X2 , ..., Xk of integers are represented with sorted lists, it takes O(|X1 | + |X2 | + ...|Xk |) time to ﬁnd their intersection. The key to this insight is that when two sets in F are merged, replacing them with their intersection, the sum of cardinalities of sets in F drops by an amount proportional to the time to perform the intersection. Therefore, the bound for all intersections is proportional to the sum of

© 2005 by Chapman & Hall/CRC

30-24

Handbook of Data Structures and Applications

cardinalities of the initial lists. The problem of ﬁnding the occurrences of p reduces to this one as follows. Let Xi denote the positive positions of segment xi of p. Shift these positions to the left by |x1 x2 ...xi−1 | to ﬁnd the candidate positions they imply for the left endpoint of p in t. Intersecting the sets of candidates gives the locations of p in t. To ﬁnd the substrings {x1 , x2 , ..., xk } of p, index from the root of the position heap on the leading characters of p until a positive node is reached. The label of this path is x1 , and recursing on the remaining suﬃx of p gives {x2 , x3 , ..., xk−1 }. It doesn’t give xk , since an attempt to produce xk in this way it may run out of characters of p before a node with a positive position number is reached. Instead, ﬁnd xk by indexing from the right end of p using the dual heap until a positive position number is reached. Therefore, {x1 , x2 , ..., xk−1 } represent disjoint intervals p, while xk−1 and xk can represent overlapping intervals of p. The sum of their lengths is therefore O(|p|), giving an O(|p|) bound to ﬁnd all occurrences of p in t in this case.

References [1] A. Blumer, J. Blumer, D. Ehrenfeucht, D. Haussler, and R McConnell. Complete inverted ﬁles for eﬃcient text retrieval and analysis. Journal of the ACM, 34:578–595, 1987. [2] B. Clift, D. Haussler, R. McConnell, T. D. Schneider, and G. D. Stormo. Sequence landscapes. Nucleic Acids Research, 14:141–158, 1986. [3] E. G. Coﬀman and J. Eve. File structures using hashing functions. Communications of the ACM, 11:13–21, 1981. [4] U. Manber and E. Myers. Suﬃx arrays: a new method for on-line search. SIAM J. Comput., 22:935–948, 1993. [5] E. M. McCreight. A space-economical suﬃx tree construction algorithm. Journal of the ACM, 23:262–272, 1976. [6] D. P. Mehta and S. Sahni. A data structure for circular string analysis and visualization. IEEE Transactions on Computers, 42:992–997, 1993. [7] D. P. Mehta and S. Sahni. Computing display conﬂicts in string visualization. IEEE Transactions on Computers, 43:350–361, 1994. [8] D. P. Mehta and S. Sahni. Models, techniques, and algorithms for ﬁnding, selecting and displaying patterns in strings and other discrete objects. Journal of Systems and Software, 39:201–221, 1997.

© 2005 by Chapman & Hall/CRC

31 Persistent Data Structures 31.1 31.2 31.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-1 Algorithmic Applications of Persistent Data Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-4 General Techniques for Making Data Structures Persistent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-9 The Fat Node Method • Node Copying and Node Splitting • Handling Arrays • Making Data Structures Conﬂuently Persistent

31.4 Tel Aviv University

31.1

Making Speciﬁc Data Structures More Eﬃcient 31-18 Redundant Binary Counters

Haim Kaplan 31.5

•

Persistent Deques

Concluding Remarks and Open Questions . . . . . . 31-24

Introduction

Think of the initial conﬁguration of a data structure as version zero, and of every subsequent update operation as generating a new version of the data structure. Then a data structure is called persistent if it supports access to all versions and it is called ephemeral otherwise. The data structure is partially persistent if all versions can be accessed but only the newest version can be modiﬁed. The structure is fully persistent if every version can be both accessed and modiﬁed. The data structure is conﬂuently persistent if it is fully persistent and has an update operation which combines more than one version. Let the version graph be a directed graph where each node corresponds to a version and there is an edge from node V1 to a node V2 if and only of V2 was created by an update operation to V1 . For partially persistent data structure the version graph is a path; for fully persistent data structure the version graph is a tree; and for conﬂuently persistent data structure the version graph is a directed acyclic graph (DAG). A notion related to persistence is that of purely functional data structures. (See Chapter 40 by Okasaki in this handbook.) A purely functional data structure is a data structure that can be implemented without using an assignment operation at all (say using just the functions car, cdr, and cons, of pure lisp). Such a data structure is automatically persistent. The converse, however, is not true. There are data structures which are persistent and perform assignments. Since the seminal paper of Driscoll, Sarnak, Sleator, and Tarjan (DSST) [18], and over the past ﬁfteen years, there has been considerable development of persistent data structures. Persistent data structures have important applications in various areas such as functional programming, computational geometry and other algorithmic application areas. The research on persistent data structures splits into two main tracks. The ﬁrst track is of designing general transformations that would make any ephemeral data structure persistent

31-1

© 2005 by Chapman & Hall/CRC

31-2

Handbook of Data Structures and Applications

while introducing low overhead in space and time. The second track is on how to make speciﬁc data structures, such as lists and search trees, persistent. The seminal work of DSST mainly addresses the question of ﬁnding a general transformation to make any data structure persistent. In addition DSST also address the special case of making search trees persistent in particular. For search trees they obtain a result which is better than what one gets by simply applying their general transformation to, say, red-black trees. There is a naive scheme to make any data structure persistent. This scheme performs the operations exactly as they would have been performed in an ephemeral setting but before each update operation it makes new copies of all input versions. Then it performs the update on the new copies. This scheme is obviously ineﬃcient as it takes time and space which is at least linear in the size of the input versions. When designing an eﬃcient general transformation to make a data structure persistent DSST get started with the so called fat node method . In this method you allow each ﬁeld in the data structure to store more than one value, and you tag each value by the version which assigned it to the ﬁeld. This method is easy to apply when we are interested only in a partially persistent data structure. But when the target is a fully persistent data structure, the lack of linear order on the versions already makes navigation in a naive implementation of the fat node data structure ineﬃcient. DSST manage to limit the overhead by linearizing the version tree using a data structure of Dietz and Sleator so we can determine fast whether one version precedes another in this linear order. Even when implemented carefully the fat node method has logarithmic (in the number of versions) time overhead to access or modify a ﬁeld of a particular node in a particular version. To reduce this overhead DSST described two other methods to make data structures persistent. The simpler one is the node copying method which is good to obtain partially persistent data structures. For obtaining fully persistent data structures they suggest the node splitting method. These methods simulate the fat node method using nodes of constant size. They show that if nodes are large enough (but still of constant size) then the amount of overhead is constant per access or update of a ﬁeld in the ephemeral data structure. These general techniques suggested by DSST have some limitations. First, all these methods, including even the fat node method, fail to work when the data structure has an update operation which combines more than one version, and conﬂuent persistence is desired. Furthermore, the node splitting and node copying methods apply only to pointer based data structures (no arrays) where each node is of constant size. Since the simulation has to add reverse pointers to the data structure the methods require nodes to be of bounded indegree as well. Last, the node coping and the node splitting techniques have O(1) amortized overhead per update or access of a ﬁeld in the ephemeral data structure. DSST left open the question of how to make this overhead O(1) in the worst case. These limitations of the transformations of DSST were addressed by subsequent work. Dietz and Raman [13] and Brodal [5] addressed the question of bounding the worst case overhead of an access or an update of a ﬁeld. For partial persistence Brodal gives a way to implement node coping such that the overhead is O(1) in the worst case. For fully persistence, the question of whether there is a transformation with O(1) worst case overhead is still unresolved. The question of making data structures that use arrays persistent with less than logarithmic overhead per step has been addressed by Dietz [12]. Dietz shows how to augment the fat node method with a data structure of van Emde Boaz, Kaas, and Zijlstra [33, 34] to make an eﬃcient fully persistent implementation of an array. With this implementation, if we denote by m the number of updates, then each access takes O(log log m) time, an update takes O(log log m) expected amortized time and the space is linear in m. Since we can model the memory of a RAM by an array, this transformation of Dietz can make any

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-3

data structure persistent with slowdown double logarithmic in the number of updates to memory. The question of how to make a data structure with an operation that combines versions conﬂuently persistent has been recently addressed by Fiat and Kaplan [19]. Fiat and Kaplan point out the fundamental diﬀerence between fully persistent and conﬂuently persistent data structures. Consider the naive scheme described above and assume that each update operation creates constantly many new nodes. Then, as long as no update operation combines more than one version, the size of any version created by the naive scheme is linear in the number of versions. However when updates combine versions the size of a single version can be exponential in the number of versions. This happens in the simple case where we update a linked list by concatenating it to itself n times. If the initial list is of size one then the ﬁnal list after n concatenations is of size 2n . Fiat and Kaplan prove by simple information theoretic argument that for any general reduction to make a data structure conﬂuently persistent there is a DAG of versions which cannot be represented using only constant space per assignment. Speciﬁcally, Fiat and Kaplan deﬁne the eﬀective depth of the DAG which is the logarithm of the maximum number of diﬀerent paths from the root of the DAG to any particular vertex. They show that the number of bits that may be required for assignment is at least as large as the eﬀective depth of the DAG. Fiat and Kaplan also give several methods to make a data structure conﬂuently persistent. The simplest method has time and space overhead proportional to the depth of the DAG. Another method has overhead proportional to the eﬀective depth of the DAG and degenerate to the fat node method when the DAG is a tree. The last method reduces the time overhead to be polylogarithmic in either the depth of the DAG or the eﬀective depth of the DAG at the cost of using randomization and somewhat more space. The work on making speciﬁc data structures persistent has started even prior to the work of DSST. Dobkin and Munro [16] considered a persistent data structure for computing the rank of an object in an ordered set of elements subject to insertions and deletions. Overmars [29] improved the time bounds of Dobkin and Munro and further reduced the storage for the case where we just want to determine whether an element is in the current set or not. Chazelle [8] considered ﬁnding the predecessor of a new element in the set. As we already mentioned DSST suggest two diﬀerent ways to make search trees persistent. The more eﬃcient of their methods has O(log n) worst case time bound and O(1) worst case space bound for an update. A considerable amount of work has been devoted to the question of how to make concatenable double ended queues (deques) conﬂuently persistent. Without catenation, one can make deques fully persistent either by the general techniques of DSST or via real-time simulation of the deque using stacks (see [23] and the references there). Once catenation is added, the problem of making stacks or deques persistent becomes much harder, and the methods mentioned above fail. A straightforward use of balanced trees gives a representation of persistent catenable deques in which an operation on a deque or deques of total size n takes O(log n) time. Driscoll, Sleator, and Tarjan [17] combined a tree representation with several additional ideas to obtain an implementation of persistent catenable stacks in which the k th operation takes O(log log k) time. Buchsbaum and Tarjan [7] used a recursive decomposition of trees to obtain two implementations of persistent catenable deques. The ﬁrst ∗ has a time bound of 2O(log k) and the second a time bound of O(log∗ k) for the k th operation, where log∗ k is the iterated logarithm, deﬁned by log(1) k = log2 k, log(i) k = log log(i−1) k for i > 1, and log∗ k = min{i | log(i) k ≤ 1}. Finally, Kaplan and Tarjan [23] gave a real-time, purely functional (and hence conﬂuently persistent) implementation of deques with catenation in which each operation takes O(1)

© 2005 by Chapman & Hall/CRC

31-4

Handbook of Data Structures and Applications

time in the worst case. A related structure which is simpler but not purely functional and has only amortized constant time bound on each operation has been given by Kaplan, Okasaki, and Tarjan [21]. A key ingredient in the results of Kaplan and Tarjan and the result of Kaplan, Okasaki, and Tarjan is an algorithmic technique related to the redundant digital representations devised to avoid carry propagation in binary counting [9]. If removing elements from one side of the deque is disallowed. Okasaki [28] suggested another conﬂuently persistent implementation with O(1) time bound for every operation. This technique is related to path reversal technique which is used in some union-ﬁnd data structures [32]. Search trees also support catenation and split operations [31] and therefore conﬂuently persistent implementation of search trees is natural to ask for. Search trees can be made persistent and even conﬂuently persistent using the path copying technique [18]. In path copying you copy every node that changes while updating the search tree and its ancestors. Since updates to search trees aﬀect only a single path, this technique results in copying at most one path and thereby costs logarithmic time and space per update. Making ﬁnger search trees conﬂuently persistent is more of a challenge, as we want to prevent the update operation to propagate up on the leftmost and rightmost spines of the tree. This allows an update to be made at distance d from the beginning or end of the list in O(log d) time. Kaplan and Tarjan [22] used the redundant counting technique to make ﬁnger search tree conﬂuently persistent. Using the same technique they also managed to reduce the time (and space) overhead of catenation to be O(log log n) where n is the number of elements in the larger tree. The structure of the rest of this chapter is as follows. Section 31.2 describes few algorithms that use persistent data structures to achieve their best time or space bounds. Section 31.3 surveys the general methods to make data structures persistent. Section 31.4 gives the highlights underlying persistent concatenable deques. We conclude in Section 31.5.

31.2

Algorithmic Applications of Persistent Data Structures

The basic concept of persistence is general and may arise in any context where one maintains a record of history for backup and recovery, or for any other purpose. However, the most remarkable consequences of persistent data structures are speciﬁc algorithms that achieve their best time or space complexities by using a persistent data structure. Most such algorithms solve geometric problems but there are also examples from other ﬁelds. In this section we describe few of these algorithms. The most famous geometric application is the algorithm for planar point location by Sarnak and Tarjan [30] that triggered the development of the whole area. In the planar point location problem we are given a subdivision of the Euclidean plane into polygons by n line segments that intersect only at their endpoints. The goal is to preprocess these line segments and build a data structure such that given a query point we can eﬃciently determine which polygon contains it. As common in this kind of computational geometry problem, we measure a solution by three parameters: The space occupied by the data structure, the preprocessing time, which is the time it takes to build the data structure, and the query time. Sarnak and Tarjan suggested the following solution (which builds upon previous ideas of Dobkin and Lipton [15] and Cole [10]). We partition the plane into vertical slabs by drawing a vertical line through each vertex (intersection of line segments) in the planar subdivision. Notice that the line segments of the subdivision intersecting a slab are totally ordered. Now it is possible to answer a query by two binary searches. One binary search locates the slab that contains the query, and another binary search locates the segment preceding the query

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-5

point within the slab. If we associate with each segment within a slab, the polygon just above it, then we have located the answer to the query. If we represent the slabs by a binary search tree from left to right, and the segments within each slab by a binary search tree sorted from bottom to top, we can answer a query in O(log n) time.∗ However if we build a separate search tree for each slab then the worst case space requirement is Ω(n2 ), when Ω(n) lines intersect Ω(n) slabs. The key observation is that the sets of line segments intersecting adjacent slabs are similar. If we have the set of one particular slab we can obtain the set of the slab to its right by deleting segments that end at the boundary between these slabs, and inserting segments that start at that boundary. As we sweep all the slabs from left to right we get that in total there are n deletions and n insertions; one deletion and one insertion for every line segment. This observation reduces the planar point location to the problem of maintaining partially persistent search trees. Sarnak and Tarjan [30] suggested a simple implementation of partially persistent search tree where each update takes O(log n) amortized time and consumes O(1) amortized space. Using these search trees they obtained a data structure for planar point location that requires O(n) space, takes O(n log n) time to build, and can answer each query in O(log n) time. The algorithm of Sarnak and Tarjan for planar point location in fact suggests a general technique for transforming a 2-dimensional geometric search problem into a persistent data structure problem. Indeed several applications of this technique have emerged since Sarnak and Tarjan published their work [3]. As another example consider the problem of 3-sided range searching in the plane. In this problem we preprocess a set of n points in the plane so given a triple (a, b, c) with a ≤ b we can eﬃciently reports all points (x, y) ∈ S such that a ≤ x ≤ b, and y ≤ c. The priority search tree of McCreight [26] yields a solution to this problem with O(n) space, O(n log n) preprocessing time, and O(log n) time per query. Using persistent data structure, Boroujerdi and Moret [3] suggest the following alternative. Let y1 ≤ y2 ≤ · · · ≤ yn be the y-coordinates of the points in S in sorted order. For each i, 1 ≤ i ≤ n we build a search tree containing all i points (x, y) ∈ S where y ≤ yi , and associate that tree with yi . Given this collection of search tree we can answer a query (a, b, c) in O(log n) time by two binary searches. One search uses the y coordinate of the query point to ﬁnd the largest i such that yi ≤ c. Then we use the search tree associated with yi to ﬁnd all points (x, y) in it with a ≤ x ≤ b. If we use partially persistent search trees then we can build the trees using n insertions so the space requirement is O(n), and the preprocessing time is O(n log n). This technique of transforming a 2-dimensional geometric search problem into a persistent data structure problem requires only a partially persistent data structure. This is since we only need to modify the last version while doing the sweep. Applications of fully persistent data structures are less common. However, few interesting ones do exist. One such algorithm that uses a fully persistent data structure is the algorithm of Alstrup et al. for the binary dispatching problem [1]. In object oriented languages there is a hierarchy of classes (types) and method names are overloaded (i.e., a method may have diﬀerent implementations for diﬀerent types of its arguments). At run time when a method is invoked, the most speciﬁc implementation which is appropriate for the arguments has to be activated. This is a critical component of execution performance in object oriented languages. Here is a more formal speciﬁcation of the problem. We model the class hierarchy by a tree T with n nodes, each representing a class. A

∗ Note

that testing whether a point is above or below a line takes O(1) time.

© 2005 by Chapman & Hall/CRC

31-6

Handbook of Data Structures and Applications

class A which is a descendant of B is more speciﬁc than B and we denote this relation by A ≤ B or A < B if we know that A = B. In addition we have m diﬀerent implementations of methods, where each such implementation is speciﬁed by a name, number of arguments, and the type of each argument. We shall assume that m > n, as if that is not the case we can map nodes that do not participate in any method to their closest ancestor that does participate in O(n) time. A method invocation is a query of the form s(A1 , . . . , Ad ) where s is a method name that has d arguments with types A1 , . . . , Ad , respectively. An implementation s(B1 , . . . , Bd ) is applicable for s(A1 , . . . , Ad ) if Ai ≤ Bi for every 1 ≤ i ≤ d. The most speciﬁc method which is applicable for s(A1 , . . . , Ad ) is the method s(B1 , . . . , Bd ) such that Ai ≤ Bi for 1 ≤ i ≤ d, and for any other implementation s(C1 , . . . , Cd ) which is applicable for s(A1 , . . . , Ad ) we have Bi ≤ Ci for 1 ≤ i ≤ d. Note that for d > 1 this may be ambiguous, i.e. we might have two applicable methods s(B1 , . . . , Bd ) and s(C1 , . . . , Cd ) where Bi = Ci , Bj = Cj , Bi ≤ Ci and Cj ≤ Bj . The dispatching problem is to ﬁnd for each invocation the most speciﬁc applicable method if it exists. If it does not exist or in case of ambiguity, “no applicable method” or “ambiguity” has to be reported, respectively. In the binary dispatching problem, d = 2, i.e. we assume that all implementations and invocations have two arguments. Alstrup et al. describe a data structure for the binary dispatching problem that use O(m) space, O(m(log log m)2 ) preprocessing time and O(log m) query time. They obtain this data structure by reducing the problem to what they call the bridge color problem. In the bridge color problem the input consists of two trees T1 and T2 with edges, called bridges, connecting vertices in T1 to vertices in T2 . Each bridge is colored by a subset of colors from C. The goal is to construct a data structure which allows queries of the following form. Given a triple (v1 , v2 , c) where v1 ∈ T1 , v2 ∈ T2 , and c ∈ C ﬁnds the bridge (w1 , w2 ) such that 1. v1 ≤ w1 in T1 , and v2 ≤ w2 in T2 , and c is one of the colors associated with (w1 , w2 ). 2. There is no other such bridge (w , w ) with v2 ≤ w < w2 or v1 ≤ w < w1 . If there is no bridge satisfying the ﬁrst condition the query just returns nothing and if there is a bridge satisfying the ﬁrst condition but not the second we report “ambiguity”. We reduce the binary dispatching problem to the bridge color problem by taking T1 and T2 to be copies of the class hierarchy T of the dispatching problem. The set of colors is the set of diﬀerent method names. (Recall that each method name may have many implementations for diﬀerent pairs of types.) We make a bridge (v1 , v2 ) between v1 ∈ T1 and v2 ∈ T2 whenever there is an implementation of some method for classes v1 and v2 . We color the bridge by all names of methods for which there is an implementation speciﬁc to the pair of type (v1 , v2 ). It is easy to see now that when we invoke a method s(A1 , A2 ) the most speciﬁc implementation of s to activate corresponds to the bridge colored s connecting an ancestor of v1 to an ancestor of v2 which also satisﬁes Condition (2) above. In a way which is somewhat similar to the reduction between static two dimensional problem to a dynamic one dimensional problem in the plane sweep technique above, Alstrup et al. reduce the static bridge color problem to a similar dynamic problem on a single tree which they call the tree color problem. In the tree color problem you are given a tree T , and a set of colors C. At any time each vertex of T has a set of colors associated with it. We want a data structure which supports the updates, color(v,c): which add the color c to the set associated with v; and uncolor(v,c) which deletes the color c from the set associated with v. The query we support is given a vertex v and a color c, ﬁnd the closest ancestor of v that has color c. The reduction between the bridge color problem and the tree color problem is as follows. For each node v ∈ T1 we associate an instance v of the tree color problem where the

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-7

underlying tree is T2 and the set of colors C is the same as for the bridge color problem. The label of a node w ∈ T2 in v contains color c if w is an endpoint of a bridge with color c whose endpoint in T1 is an ancestor of v. For each pair (w, c) where w ∈ T2 and c is a color associated with w in v we also keep the closest ancestor v to v in T1 such that there is a bridge (v , w) colored c. We can use a large (sparse) array indexed by pairs (w, c) to map each such pair to its associated vertex. We denote this additional data structure associated with v by av . Similarly for each vertex u ∈ T2 we deﬁne an instance u of the tree color problem when the underlying tree is T1 , and the associated array au . We can answer a query (v1 , v2 , c) to the bridge color data structure as follows. We query the data structure v1 with v2 to see if there is an ancestor of v2 colored c in the coloring of T2 deﬁned by v1 . If so we use the array av1 to ﬁnd the bridge (w1 , w2 ) colored c where v1 ≤ w1 and v2 ≤ w2 , and w1 is as close as possible to v1 . Similarly we use the data structures v2 and av2 to ﬁnd the bridge (w1 , w2 ) colored c where v1 ≤ w1 and v2 ≤ w2 , and w2 is as close as possible to v2 , if it exists. Finally if both bridges are identical then we have the answer to the query (v1 , v2 , c) to the bridge color data structure. Otherwise, either there is no such bridge or there is an ambiguity (when the two bridges are diﬀerent). The problem of this reduction is its large space requirement if we represent each data structure v , and av for v ∈ T1 ∪ T2 independently.† The crucial observation though is that these data structures are strongly related. Thus if we use a dynamic data structure for the tree color problem we can obtain the data structure corresponding to w from the data structure corresponding to its parent using a small number of modiﬁcations. Speciﬁcally, suppose we have generated the data structures v and av for some v ∈ T1 . Let w be a child of v in T1 . We can construct w by traversing all bridges whose one endpoint is w. For each such bridge (w, u) colored c, we perform color(u,c), and update the entry of (u, c) in av to contain w. So if we were using fully persistent arrays and a fully persistent data structure for the tree color problem we can construct all data structures mentioned above while doing only O(m) updates to these persistent data structures. Alstrup et al. [1] describe a data structure for the tree color problem where each update takes O(log log m) expected time and query time is O(log m/ log log m). The space is linear in the sum of the sizes of the color-sets of the vertices. To make it persistent without consuming too much space Alstrup et al. [1] suggest how to modify the data structure so that each update makes O(1) memory modiﬁcations in the worst case (while using somewhat more space). Then by applying the technique of Dietz [12] (see also Section 31.3.3) to this data structure we can make it fully persistent. The time bounds for updates and queries increase by a factor of O(log log m), and the total space is O(|C|m). Similarly, we can make the associated arrays av fully persistent. The resulting solution to the binary dispatching problem takes O(m(log log m)2 ) time to construct, requires O(|C|m) space and support a query in O(log m) time. Since the number of memory modiﬁcations while constructing the data structure is only O(m) Alstrup et al. also suggest that the space can be further reduces to O(m) by maintaining the entire memory as a dynamic perfect hashing data structure. Fully persistent lists proved useful in reducing the space requirements of few three dimensional geometric algorithms based on the sweep line technique, where the items on the sweep line have secondary lists associated with them. Kitsios and Tsakalidis [25] considered hidden line elimination and hidden surface removal. The input is a collection of (non

† We can compress the sparse arrays using hashing but even if we do that the space requirement may be quadratic in m.

© 2005 by Chapman & Hall/CRC

31-8

Handbook of Data Structures and Applications

intersecting) polygons in three dimensions. The hidden line problem asks for the parts of the edges of the polygons that are visible from a given viewing position. The hidden surface removal problem asks to compute the parts of the polygons that are visible from the viewing position. An algorithm of Nurmi [27] solves these problems by projecting all polygons into a collection of possible intersecting polygons in the plane and then sweeping this plane, stopping at any vertex of a projected polygon, or crossing point of a pair of projected edges. When the sweep stops at such point, the visibility status of its incident edges is determined. The algorithm maintain a binary balanced tree which stores the edges cut by the sweep line in sorted order along the sweep line. With each such edge it also maintains another balanced binary tree over the faces that cover the interval between the edge and its successor edge on the sweep line. These faces are ordered in increasing depth order along the line of sight. An active edge is visible if the topmost face in its list is diﬀerent from the topmost face in the list of its predecessor. If n is the number of vertices of the input polygons and I is the number of intersections of edges on the projection plane then the sweep line stops at n + I points. Looking more carefully at the updates one has to perform during the sweep, we observe that a constant number of update operations on balanced binary search trees has to be performed non destructively at each point. Thus, using fully persistent balanced search trees one can implement the algorithm in O((n + I) log n) time and O(n + I) space. Kitsios and Tsakalidis also show that by rebuilding the data structure from scratch every O(n) updates we can reduce the space requirement to O(n) while retaining the same asymptotic running time. Similar technique has been used by Bozanis et al. [4] to reduce the space requirement of an algorithm of Gupta et al. [20] for the rectangular enclosure reporting problem. In this problem the input is a set S of n rectangles in the plane whose sides are parallel to the axes. The algorithm has to report all pairs (R, R ) of rectangles where R, R ∈ S and R encloses R . The algorithm uses the equivalence between the rectangle enclosure reporting problem and the 4-dimensional dominance problem. In the 4-dimensional dominance problem the input is a set of n points P in four dimensional space. A point p = (p1 , p2 , p3 , p4 ) dominates p = (p1 , p2 , p3 , p4 ) if and only if pi ≥ pi for i = 1, 2, 3, 4. We ask for an algorithm to report all dominating pairs of points, (p, p ), where p, p ∈ P , and p dominates p . The algorithm of Gupta et al. ﬁrst sorts the points by all coordinates and translates the coordinates to ranks so that they become points in U 4 where U = {0, 1, 2, . . . , n}. It then divides the sets into two equal halves R and B according to the forth coordinate (R contains the points with smaller forth coordinate). Using recurrence on B and on R it ﬁnds all dominating pairs (p, p ) where p and p are either both in B or both in R. Finally it ﬁnds all dominating pairs (r, b) where r ∈ R and b ∈ B by iterating a plane sweeping algorithm on the three dimensional projections of the points in R and B. During the sweep, for each point in B, a list of points that it dominates in R is maintained. The size of these lists may potentially be as large as the output size which in turn may be quadratic. Bozanis et al. suggest to reduce the space by making these lists fully persistent, which are periodically being rebuilt.

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31.3

31-9

General Techniques for Making Data Structures Persistent

We start in Section 31.3.1 describing the fat node simulation. This simulation allows us to obtain fully persistent data structures and has an optimal space expansion but time slowdown logarithmic in the number of versions. Section 31.3.2 describes the node copying and the node splitting methods that reduce the time slowdown to be constant while increasing the space expansion only by a constant factor. In Section 31.3.3 we address the question of making arrays persistent. Finally in Section 31.3.4 we describe simulation that makes data structures conﬂuently persistent.

31.3.1

The Fat Node Method

DSST ﬁrst considered the fat node method . The fat node method works by allowing a ﬁeld in a node of the data structure to contain a list of values. In a partial persistent setting we associate ﬁeld value x with version number i, if x was assigned to the ﬁeld in the update operation that created version i.‡ We keep this list of values sorted by increasing version number in a search tree. In this method simulating an assignment takes O(1) space, and O(1) time if we maintain a pointer to the end of the list. An access step takes O(log m) time where m is the number of versions. The diﬃculty with making the fat node method work in a fully persistent setting is the lack of total order on the versions. To eliminate this diﬃculty, DSST impose a total order on the versions consistent with the partial order deﬁned by the version tree. They call this total order the version list. When a version i is created it is inserted into the version list immediately after its parent (in the version tree). This implies that the version list deﬁnes a preorder on the version tree where for any version i, the descendants of i in the version tree occur consecutively in the version list, starting with i. The version list is maintained in a data structure that given two versions x and y allows to determine eﬃciently whether x precedes y. Such a data structure has been suggested by Dietz and Sleator [11]. (See also a simpler related data structure by [2].) The main idea underlying these data structures is to assign an integer label to each version so that these labels monotonically increase as we go along the list. Some diﬃculty arises since in order to use integers from a polynomial range we occasionally have to relabel some versions. For eﬃcient implementation we need to control the amount of relabeling being done. We denote such a data structure that maintains a linear order subject to the operation insert(x, y) which inserts x after y, and order(x, y) which returns “yes” if x precedes y, an Order Maintenance (OM) data structure. As in the partial persistence case we keep a list of version-value pairs in each ﬁeld. This list contains a pair for each value assigned to the ﬁeld in any version. These pairs are ordered according to the total order imposed on the versions as described above. We maintain these lists such that the value corresponding to ﬁeld f in version i is the value associated with the largest version in the list of f that is not larger than i. We can ﬁnd this version by carrying out a binary search on the list associated with the ﬁeld using the OM data structure to do comparisons. To maintain these lists such that the value corresponding to ﬁeld f in version i is the value

‡ If

the update operation that created version i assigned to a particular ﬁeld more than once we keep only the value that was assigned last.

© 2005 by Chapman & Hall/CRC

31-10

Handbook of Data Structures and Applications

associated with the largest version in the list of f that is not larger than i, the simulation of an update in the fully persistent setting diﬀer slightly from what happens in the partially persistent case. Assume we assign a value x to ﬁeld f in an update that creates version i. (Assume for simplicity that this is the only assignment to f during this update.) First we add the pair (i, x) to the list of pairs associated with ﬁeld f . Let i be the version following i in the version list (i.e. in the total order of all versions) and let i be the version following i in the list associated with f . ( If there is no version following i in one of these lists we are done.) If i > i then the addition of the pair (i, x) to the list of pairs associated with f may change the value of f in all versions between i and the version preceding i in the version list, to be x. To ﬁx that we add another pair (i , y) to the list associated with f , where y is the value of f before the assignment of x to f . The overhead of the fat node method in a fully persistent settings is O(log m) time and O(1) space per assignment, and O(log m) time per access step, where m is the number of versions. Next, DSST suggested two methods to reduce the logarithmic time overhead of the fat node method. The simpler one obtains a partially persistent data structure and is called node copying. To obtain a fully persistent data structure DSST suggested the node splitting method.

31.3.2

Node Copying and Node Splitting

The node-copying and the node splitting methods simulate the fat node method using nodes of constant size. Here we assume that the data structure is a pointer based data structure where each node contains a constant number of ﬁelds. For reasons that will become clear shortly we also assume that the nodes are of constant bounded in-degree, i.e. the number of pointer ﬁelds that contains the address of any particular node is bounded by a constant. In the node copying method we allow nodes in the persistent data structure to hold only a ﬁxed number of ﬁeld values. When we run out of space in a node, we create a new copy of the node, containing only the newest value of each ﬁeld. Let d be the number of pointer ﬁelds in an ephemeral node and let p be the maximum in-degree of an ephemeral node. Each persistent node contains d ﬁelds which corresponds to the ﬁelds in the ephemeral node, p predecessor ﬁelds, e extra ﬁelds, where e is a suﬃciently large constant that we specify later, and one ﬁeld for a copy pointer. All persistent nodes which correspond to the same ephemeral node are linked together in a single linked list using the copy pointer. Each ﬁeld in a persistent node has a version stamp associated with it. As we go along the chain of persistent nodes corresponding to one ephemeral node then the version stamps of the ﬁelds in one node are no smaller than version stamps of the ﬁelds in the preceding nodes. The last persistent node in the chain is called live. This is the persistent node representing the ephemeral node in the most recent version which we can still update. In each live node we maintain predecessor pointers. If x is a live node and node z points to x then we maintain in x a pointer to z. We update ﬁeld f in node v, while simulating the update operation creating version i, as follows.§ Let x be the live persistent node corresponding to v in the data structure. If there is an empty extra ﬁeld in x then we assign the new value to this extra ﬁeld, stamp it with version i, and mark it as a value associated with original ﬁeld f . If f is a pointer ﬁeld which now points to a node z, we update the corresponding predecessor pointer in z to point to x. In case all extra ﬁelds in x are used (and none of them is stamped with version

§ We assume that each ﬁeld has only one value in any particular version. When we update a ﬁeld in version i that already has a value stamped with version i then we overwrite its previous value.

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-11

i) we copy x as follows. We create a new persistent node y, make the copy pointer of x point to y, store in each original ﬁeld in y the most recent value assigned to it, and stamp these values with version stamp i. In particular, ﬁeld f in node y stores its new value marked with version i. For each pointer ﬁeld in y we also update the corresponding predecessor pointer to point to y rather than to x. Then we have to update each ﬁeld pointing to x in version i − 1 to point to y in version i. We follow, in turn, each predecessor pointer in x. Let z be a node pointed to by such a predecessor pointer. We identify the ﬁeld pointing to x in z and update its value in version i to be y. We also update a predecessor pointer in y to point to z. If the old value of the pointer to x in z is not tagged with version i (in particular this means that z has not been copied) then we try to use an extra ﬁeld to store the new version-value pair. If there is no free extra pointer in z we copy z as above. Then we update the ﬁeld that points to x to point to y in the new copy of z. This sequence of node copying may cascade, but since each node is copied at most once, the simulation of the update step must terminate. In version i, y is the live node corresponding to v. A simple analysis shows that if we use at least as many extra ﬁelds as predecessor ﬁelds at each node (i.e. e ≥ p) then the amortized number of nodes that are copied due to a single update is constant. Intuitively, each time we copy a node we gain e empty extra ﬁelds in the live version that “pay” for the assignments that had to be made to redirect pointers to the new copy. A similar simulation called the node splitting method makes a data structure fully persistent with O(1) amortized overhead in time and space. The details however are somewhat more involved so we only sketch the main ideas. Here, since we need predecessor pointers for any version¶ it is convenient to think of the predecessor pointers as part of the ephemeral data structure, and to apply the simulation to the so called augmented ephemeral data structure. We represent each fat node by a list of persistent nodes each of constant size, with twice as many extra pointers as original ﬁelds in the corresponding node of the augmented ephemeral data structure. The values in the ﬁelds of the persistent nodes are ordered by the version list. Thus each persistent node x is associated with an interval of versions in the version lists, called the valid interval of x, and it stores all values of its ﬁelds that fall within this interval. The ﬁrst among these values is stored in an original ﬁeld and the following ones occupy extra ﬁelds. The key idea underlying this simulation is to maintain the pointers in the persistent structure consistent such that when we traverse a pointer valid in version i we arrive at a persistent node whose valid interval contains version i. More precisely, a value c of a pointer ﬁeld must indicate a persistent node whose valid interval contains the valid interval of c. We simulate an update step to ﬁeld f , while creating version i from version p(i), as follows. If there is already a persistent node x containing f stamped with version i then we merely change the value of f in x. Otherwise, let x be the persistent node whose valid interval contains version i. Let i+ be the version following i in the version list. Assume the node following x does not have version stamp of i+. We create two new persistent node x , and x , and insert them into the list of persistent nodes of x, such that x follows x, and x follows x . We give node x version stamp of i and ﬁll all its original ﬁelds with their values at version i. The extra ﬁelds in x are left empty. We give x version stamp of i+. We ﬁll

¶ So

we cannot simply overwrite a value in a predecessor pointer.

© 2005 by Chapman & Hall/CRC

31-12

Handbook of Data Structures and Applications

the original ﬁelds of x with their values at version i+. We move from the extra ﬁelds of x all values with version stamps following i+ in the version list to x . In case the node which follows x in its list has version stamp i+ then x is not needed. After this ﬁrst stage of the update step, values of pointer ﬁelds previously indicating x may be inconsistent. The simulation then continues to restore consistency. We locate all nodes containing inconsistent values and insert them into a set S. Then we pull out one node at the time from S and ﬁx its values. To ﬁx a value we may have to replace it with two or more values each valid in a subinterval of the valid interval of the original value. This increases the number of values that has to be stored at the node so we may have to split the node. This splitting may cause more values to become inconsistent. So node splitting and consistency ﬁxing cascades until consistency is completely restored. The analysis is based on the fact that each node splitting produce a node with suﬃciently many empty extra ﬁelds. For further details see [18].

31.3.3

Handling Arrays

Dietz [12] describes a general technique for making arrays persistent. In his method, it takes O(log log m) time to access the array and O(log log m) expected amortized time to change the content of an entry, where m is the total number of updates. The space is linear in m. We denote the size of the array by n and assume that n < m. Dietz essentially suggests to think of the array as one big fat node with n ﬁelds. The list of versions-values pairs describing the assignments to each entry of the array is represented in a data structure of van Emde Boas et al. [33, 34]. This data structure is made to consume space linear in the number of items using dynamic perfect hashing [14]. Each version is encoded in this data structure by its label in the associated Order Maintenance (OM) data structure. (See Section 31.3.1.) A problem arises with the solution above since we refer to the labels not solely via order queries on pairs of versions. Therefore when a label of a version changes by the OM data structure the old label has to be deleted from the corresponding van Emde Boaz data structure and the new label has to be inserted instead. We recall that any one of the known OM data structures consists of two levels. The versions are partitioned into sublists of size O(log m). Each sublist gets a label and each version within a sublist gets a label. The ﬁnal label of a version is the concatenation of these two labels. Now this data structure supports an insertion in O(1) time. However, this insertion may change the labels of a constant number of sublists and thereby implicitly change the labels of O(log m) versions. Reinserting all these labels into the van Emde Boaz structures containing them may take Ω(log m log log m) time Dietz suggests to solve this problem by bucketizing the van Emde Boaz data structure. Consider a list of versions stored in such a data structure. We split the list into buckets of size O(log m). We maintain the versions in each bucket in a regular balanced search tree and we maintain the smallest version from each bucket in a van Emde Boaz data structure. This way we need to delete and reinsert a label of a version into the van Emde Boaz data structure only when the minimum label in a bucket gets relabeled. Although there are only O(m/ log m) elements now in the van Emde Boaz data structures, it could still be the case that we relabel these particular elements too often. This can happen if sublists that get split in the OM data structure contains a particular large number of buckets’ minima. To prevent that from happening we modify slightly the OM data structure as follows. We associate a potential to each version which equals 1 if the version is currently not a minimum in its bucket of its van Emde Boaz data structure and equals log log m if it is

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-13

a minimum in its bucket. Notice that since there are only O(m/ log m) buckets’ minima the total potential assigned to all versions throughout the process is O(m). We partition the versions into sublists according to their potentials where the sum of the potentials of the elements in each sublist is O(log m). We assign labels to the sublists and within each sublists as in the original OM data structure. When we have to split a sublist the work associated with the split, including the required updates on the associated van Emde Boaz data structures, is proportional to the increase in the potential of this sublist since it had last split. Since we can model the memory of a Random Access Machine (RAM) as a large array. This technique of Dietz is in fact general enough to make any data structure on a RAM persistent with double logarithmic overhead on each access or update to memory.

31.3.4

Making Data Structures Conﬂuently Persistent

Finding a general simulation to make a pointer based data structure conﬂuently persistent is a considerably harder task. In a fully persistent setting we can construct any version by carrying out a particular sequence of updates ephemerally. This seemingly innocent fact is already problematic in a conﬂuently persistent setting. In a conﬂuently persistent setting when an update applies to two versions, one has to produce these two versions to perform the update. Note that these two versions may originate from the same ancestral version so we need some form of persistence even to produce a single version. In particular, methods that achieve persistence typically create versions that share nodes. Semantically however, when an update applied to versions that share nodes we would like the result to be as if we perform the update on two completely independent copies of the input versions. In a fully persistent setting if each operation takes time polynomial in the number of versions then the size of each version is also polynomial in the number of versions. This breaks down in a conﬂuently persistent setting where even when each operation takes constant time the size of a single version could be exponential in the number of versions. Recall the example of the linked list mentioned in Section 31.1. It is initialized to contain a single node and then concatenated with itself n time. The size of the last versions is 2n . It follows that any polynomial simulation of a data structure to make it conﬂuently persistent must in some cases represent versions is a compressed form. Consider the naive scheme to make a data structure persistent which copies the input versions before each update. This method is polynomial in a fully persistent setting when we know that each update operation allocates a polynomial (in the number of versions) number of new nodes. This is not true in a conﬂuently persistent setting as the linked list example given above shows. Thus there is no easy polynomial method to obtain conﬂuently persistence at all. What precisely causes this diﬃculty in obtaining a conﬂuently persistent simulation ? Lets assume ﬁrst a fully persistent setting and the naive scheme mentioned above. Consider a single node x created during the update that constructed version v. Node x exists in version v and copies of it may also exist in descendant versions of v. Notice however that each version derived from v contains only a single node which is either x or a copy of it. In contrast if we are in a conﬂuently persistent setting a descendant version of v may contain more than a single copy of x. For example, consider the linked list being concatenated to itself as described above. Let x be the node allocated when creating the ﬁrst version. Then after one catenation we obtain a version which contains two copies of x, after 2 catenations we obtain a version containing 4 copies of x, and in version n we have 2n copies of x. Now, if we get back to the fat node method, then we can observe that it identiﬁes a node in a speciﬁc version using a pointer to a fat node and a version number. This works since

© 2005 by Chapman & Hall/CRC

31-14

Handbook of Data Structures and Applications

in each version there is only one copy of any node, and thus breaks down in the conﬂuently persistent setting. In a conﬂuently persistent setting we need more than a version number and an address of a fat node to identify a particular node in a particular version. To address this identiﬁcation problem Fiat and Kaplan [19] used the notion of pedigree. To deﬁne pedigree we need the following notation. We denote the version DAG by D, and the version corresponding to vertex v ∈ D by Dv . Consider the naive scheme deﬁned above. Let w be some node in the data structure Dv . We say that node w in version v was derived from node y in version u if version u was one of the versions on which the update producing v had been performed, and furthermore node w ∈ Dv was formed by a (possibly empty) set of assignments to a copy of node y ∈ Du . Let w be a node in some version Du where Du is produced by the naive scheme. We associate a pedigree with w, and denote it by p(w). The pedigree, p(w), is a path p = v0 , v1 , . . . , vk = u in the version DAG such that there exist nodes w0 , w1 , . . ., wk−1 , wk = w, where wi is a node of Dvi , w0 was allocated in v0 , and wi is derived from wi−1 for 1 ≤ i ≤ k. We also call w0 the seminal node of w, and denote it by s(w). Note that p(w) and s(w) uniquely identify w among all nodes of the naive scheme. As an example consider Figure 31.1. We see that version v4 has three nodes (the 1st, 3rd, and 5th nodes of the linked list) with the same seminal node w0 . The pedigree of the 1st node in Dv4 is v0 , v1 , v3 , v4 . The pedigree of the 2nd node in Dv4 is also v0 , v1 , v3 , v4 but its seminal node is w0 . Similarly, we can see that the pedigrees of the 3rd, and the 5th nodes of Dv4 are v0 , v2 , v3 , v4 and v0 , v2 , v4 , respectively. The basic simulation of Fiat and Kaplan is called the full path method and it works as follows. The data structure consists of a collection of fat nodes. Each fat node corresponds to an explicit allocation of a node by an update operation or in another words, to some seminal node of the naive scheme. For example, the update operations of Figure 31.1 performs 3 allocations (3 seminal nodes) labeled w0 , w0 , and w0 , so our data structure will have 3 fat nodes, f (w0 ), f (w0 ) and f (w0 ). The full path method represents a node w of the naive scheme by a pointer to the fat node representing s(w), together with the pedigree p(w). Thus a single fat node f represents all nodes sharing the same seminal node. We denote this set of nodes by N (f ). Note that N (f ) may contain nodes that co-exist within the same version and nodes that exist in diﬀerent versions. A fat node contains the same ﬁelds as the corresponding seminal node. Each of these ﬁelds, however, rather than storing a single value as in the original node stores a dynamic table of ﬁeld values in the fat node. The simulation will be able to ﬁnd the correct value in node w ∈ N (f ) using p(w). To specify the representation of a set of values we need the following deﬁnition of an assignment pedigree. Let p = v0 , . . . , vk = u be the pedigree of a node w ∈ Du . Let wk = w, wk−1 , . . . , w1 , wi ∈ Dvi be the sequence of nodes such that wi ∈ Dvi is derived from wi−1 ∈ Dvi−1 . This sequence exists by the deﬁnition of node’s pedigree. Let A be a ﬁeld in w and let j be the maximum such that there has been an assignment to ﬁeld A in wj during the update that created vj . We deﬁne the assignment pedigree of a ﬁeld A in node w, denoted by p(A, w), to be the pedigree of wj , i.e. p(A, w) = v0 , v1 , . . . , vj . In the example of Figure 31.1 the nodes contain one pointer ﬁeld (named next) and one data ﬁeld (named x). The assignment pedigree of x in the 1st node of Dv4 is simply v0 , the assignment pedigree of x in the 2nd node of Dv4 is likewise v0 , the assignment pedigree of x in the 3rd node of Dv4 is v0 , v2 , v3 . Pointer ﬁelds also have assignment pedigrees. The assignment pedigree of the pointer ﬁeld in the 1st node of Dv4 is v0 , v1 , the assignment pedigree of the pointer ﬁeld in the 2nd node of Dv4 is v0 , v1 , v3 , the assignment pedigree of the pointer ﬁeld of the 3rd node of Dv4 is v0 , v2 , ﬁnally, the assignment pedigree of the pointer ﬁeld of the 4th node of Dv4 is v2 , v3 , v4 . We call the set {p(A, w) | w ∈ N (f )} the set of all assignment pedigrees for ﬁeld A in a

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

x=1

31-15

Invert order of input linked list

v0

Access Pointer

w0 x=2

x=2

Allocate nodes w0, w0', with x=2 and x=1, concatenate them

w0' x=1

v1

v2

Delete first node of list, allocate new node x=1, concatenate to input list x=1

v3

x=1

x=1

Add +2 to all elements of right list Concatenate left and right lists

w0'' x=3

v4

x=3

x=2

v0

v0

v0

x=1

Concatenate Left and Right Lists

x=1

x=1 x=2

x=3

x=3

x=1

x=3

x=1

FIGURE 31.1: A DAG of ﬁve versions. In each circle we show the corresponding update operation and the resulting version. Nodes with the same color originate from the same seminal node. The three gray nodes in version Dv4 all have the same seminal node (w0 ), and are distinguished by their pedigrees v0 , v1 , v3 , v4 , v0 , v2 , v3 , v4 , and v0 , v2 , v4 . fat note f , and denote it by P (A, f ). The table that represents ﬁeld A in fat node f contains an entry for each assignment pedigree in P (A, f ). The value of a table entry, indexed by an assignment pedigree p = v0 , v1 , . . . , vj , depends on the type of the ﬁeld as follows. If A is a data ﬁeld then the value stored is the value assigned to A in the node wj ∈ Dvj whose pedigree is p. If A is a pointer ﬁeld then let w be the node pointed to by ﬁeld A after the assignment to A in wj . We store the pedigree of w and the address of the fat node that represents the seminal node of w. An access pointer to a node w in version v is represented by a pointer to the fat node representing the seminal node of w and the pedigree of w. In Figure 31.2 we give the fat nodes of the persistent data structure given in Figure 31.1.

© 2005 by Chapman & Hall/CRC

31-16

Handbook of Data Structures and Applications

x

next

f(w0)

x

next

f(w0')

x

next

f(w0'')

Assignment Pedigree

Field Value

2

Assignment Pedigree

Field Value

(,f(w0'))

null

(,f(w0'))

Assignment Pedigree

Field Value

1

3

Assignment Pedigree

Field Value

null

(,f(w0))

(,f(w0''))

Assignment Pedigree

Field Value

1

3

Assignment Pedigree

Field Value

null

(,f(w0'))

FIGURE 31.2: The fat nodes for the example of Figure 31.1. For example, the ﬁeld next has three assignments in nodes of N (f (w0 )). Thus, there are three assignment pedigrees in P (next, f (w0 )): 1. v0 — allocation of w0 in version Dv0 and default assignment of null to next. 2. v0 , v1 — inverting the order of the linked list in version Dv1 and thus assigning next a new value. The pointer is to a node whose pedigree is v0 , v1 and whose seminal node is w0 . So we associate the value (v0 , v1 , f (w0 )) with v0 , v1 . 3. v0 , v2 — allocating a new node, w0 , in version Dv2 , and assigning next to point to this new node. The pedigree of w0 is v2 so we associate the value (v2 , f (w0 )) with v0 , v2 . You can see all three entries in the table for next in the fat node f (w0 ) (Figure 31.2). Similarly, we give the table for ﬁeld x in f (w0 ) as well as the tables for both ﬁelds in fat nodes f (w0 ) and f (w0 ). When we traverse the data structure we are pointing to some fat node f and hold a pedigree q of some node w whose seminal node corresponds to f and we would like to retrieve the value of ﬁeld A in node w from the table representing ﬁeld A in f . We do that as follows. First we identify the assignment pedigree p(A, w) of ﬁeld A in node w. This is

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-17

the longest pedigree which is a preﬁx of q and has an entry in this table. In case A is a data ﬁeld, the value we are after is simply the value associated with p(A, w). However if A is a pointer ﬁeld then the value stored with p(A, w) may not be the value of A in w. This value identiﬁes a node in the version where the assignment occurred, whereas we are interested in a node in the version of w that this pointer ﬁeld points to. Let q = q0 , . . . , qk and let p(A, w) = q0 , q1 , . . . , qj . Let the value of p(A, w) be (t, f ), where t is the pedigree of the target node in Dqj and f is the fat node representing the seminal node of this target node. The nodes identiﬁed by the pedigrees p(A, w) and t were copied in versions qj+1 , . . ., qk without any assignment made to ﬁeld A in the nodes derived from the node whose pedigree is p(A, w). Thus the pedigree of the target node of ﬁeld A of node w in Dqk is tqj+1 , . . . , qk , where represents concatenation. It follows that we need representations for pedigrees and the tables representing ﬁeld values that support an eﬃcient implementation of the followings. 1. Given a pedigree q ﬁnd the longest preﬁx of q stored in a table. 2. Given a pedigree q, replace a preﬁx of q with another pedigree p. 3. To facilitate updates we also need to be able to add a pedigree to a table representing some ﬁeld with a corresponding value. In their simplest simulation Fiat and Kaplan suggested to represent pedigrees as linked lists of version numbers, and to represent tables with ﬁeld values as tries. Each assignment pedigree contained in the table is represented by a path in the corresponding trie. The last node of the path stores the associated value. Nodes in the trie can have large degrees so for eﬃciency we represent the children of each node in a trie by a splay tree. Let U be the total number of assignments the simulation performs and consider the update creating version v. Then with this implementation each assignment performed during this update requires O(d(v)) words of size O(log U ) bits, and takes O(d(v) + log U ) time, where d(v) is the depth of v in the DAG. Field retrieval also takes O(d(v) + log U ) time. The second method suggested by Fiat and Kaplan is the compressed path method. The essence of the compressed path method is a particular partition of our DAG into disjoint trees. This partition is deﬁned such that every path enters and leaves any speciﬁc tree at most once. The compressed path method encodes paths in the DAG as a sequence of pairs of versions. Each such pair contains a version where the path enters a tree T and the version where the path leaves the tree T . The length of each such representation is O(e(D)). Each value of a ﬁeld in a fat node is now associated with the compressed representation of the path of the node in N (f ) in which the corresponding assignment occurred. A key property of these compressed path representations is that they allow easy implementation of the operations we need to perform on pedigree, like replacing a preﬁx of a pedigree with another pedigree when traversing a pointer. With the compressed path method each assignment requires up to O(e(D)) words each of O(log U) bits. Searching or updating the trie representing all values of a ﬁeld in a fat node requires O(e(D) + log U) time. For the case where the DAG is a tree this method degenerates to the fat node simulation of [18]. Fiat and Kaplan also suggested how to use randomization to speed up their two basic methods at the expense of (slightly) larger space expansion and polynomially small error probability. The basic idea is encode each path (or compressed path) in the DAG by an integer. We assign to each version a random integer, and the encoding of a path p is simply

Recall that e(D) is the logarithm of the maximum number of diﬀerent paths from the root of the DAG to any particular version.

© 2005 by Chapman & Hall/CRC

31-18

Handbook of Data Structures and Applications

the sum of the integers that correspond to the versions on p. Each value of a ﬁeld in a fat node is now associated with the integer encoding the path of the node in N (f ) in which the corresponding assignment occurred. To index the values of each ﬁeld we use a hash table storing all the integers corresponding to these values. To deal with values of pointer ﬁelds we have to combine this encoding with a representation of paths in the DAG (or compressed paths) as balanced search trees, whose leaves (in left to right order) contain the random integers associated with the vertices along the path (or compressed path). This representation allows us to perform certain operations on these paths in logarithmic (or poly-logarithmic) time whereas the same operations required linear time using the simpler representation of paths in the non-randomized methods.

31.4

Making Speciﬁc Data Structures More Eﬃcient

The purely functional deques of Kaplan and Tarjan [23], the conﬂuently persistent deques of Kaplan, Okasaki, and Tarjan [21], the purely functional heaps of Brodal and Okasaki [6], and the purely functional ﬁnger search trees of Kaplan and Tarjan [22], are all based on a simple and useful mechanism called redundant counters, which to the best of our knowledge ﬁrst appeared in lecture notes by Clancy and Knuth [9]. In this section we describe what redundant counters are, and demonstrate how they are used in simple persistent deques data structure. A persistent implementation of deques support the following operations: q = push(x, q): Inserts an element x to the beginning of the deque q returning a new deque q in which x is the ﬁrst element followed by the elements of q. (x, q ) = pop(q): Returns a pair where x is the ﬁrst element of q and q is a deque containing all elements of q but x. q = Inject(x, q): Inserts an element x to the end of the deque q returning a new deque q in which x is the last element preceded by the elements of q. (x, q ) = eject(q): Returns a pair where x is the last element of q and q is a deque containing all elements of q but x. A stack supports only push and pop, a queue supports only push and eject. Catenable deques also support the operation q = catenate(q1 , q2 ): Returns a queue q containing all the elements of q1 followed by the elements of q2 . Although queues, and in particular catenable queues, are not trivial to make persistent, stacks are easy. The regular representation of a stack by a singly linked list of nodes, each containing an element, ordered from ﬁrst to last, is in fact purely functional. To push an element onto a stack, we create a new node containing the new element and a pointer to the node containing the previously ﬁrst element on the stack. To pop a stack, we retrieve the ﬁrst element and a pointer to the node containing the previously second element. Direct ways to make queues persistent simulate queues by stacks. One stack holds elements from the beginning of the queue and the other holds elements from its end. If we are interested in fully persistence this simulation should be real time and its details are not trivial. For a detailed discussion see Kaplan and Tarjan [23] and the references there. Kaplan and Tarjan [23] described a new way to do a simulation of a deque with stacks. They suggest to represent a deque by a recursive structure that is built from bounded-size deques called buﬀers. Buﬀers are of two kinds: preﬁxes and suﬃxes. A non-empty deque q over a set A is represented by an ordered triple consisting of a preﬁx , pref ix(q), of elements of A, a child deque, child(q), whose elements are ordered pairs of elements of A, and a suﬃx , suf f ix(q), of elements of A. The order of elements within q is the one consistent

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-19

with the orders of all of its component parts. The child deque child(q), if non-empty, is represented in the same way. Thus the structure is recursive and unwinds linearly. We deﬁne the descendants {childi ( q)} of deque d in the standard way, namely child0 (q) = q and childi+1 (q) = child(childi (q)) for i ≥ 0 if childi (q) is non-empty. Observe that the elements of q are just elements of A, the elements of child(q) are pairs of elements of A, the elements of child(child(q)) are pairs of pairs of elements of A, and so on. One can think of each element of childi (q) as being a complete binary tree of depth i, with elements of A at its 2i leaves. One can also think of the entire structure representing q as a stack (of q and its descendants), each element of which is preﬁx-suﬃx pair. All the elements of q are stored in the preﬁxes and suﬃxes at the various levels of this structure, grouped into binary trees of the appropriate depths: level i contains the preﬁx and suﬃx of childi (q). See Figure 31.3.

V1

V2

prefix

suffix

1

V3

suffix

e

e

suffix f g

suffix

prefix

a

b

3

4

c

d

e

f

suffix

prefix

2

suffix

5

6

7

8

suffix

9

6

7

8

9

a

b

c

d

FIGURE 31.3: Representation of a deque of elements over A. Each circle denotes a deque and each rectangle denotes a buﬀer. Squares correspond to elements from A which we denote by numbers and letters. Each buﬀer contains 0, 1, or 2 elements. Three versions are shown V1 , V2 , and V3 . Version V2 was obtained from V1 by injecting the element f . Version V3 obtained from version V2 by injecting the element g. The latter inject triggered two recursive injects into the child and grandchild deques of V2 . Note that identical binary trees and elements are represented only once but we draw them multiple times to avoid cluttering of the ﬁgure.

Because of the pairing, we can bring two elements up to level i by doing one pop or eject at level i + 1. Similarly, we can move two elements down from level i by doing one push or inject at level i + 1. This two-for-one payoﬀ leads to real-time performance. Assume that each preﬁx or suﬃx is allowed to hold 0, 1, or 2 elements, from the beginning or end of the queue, respectively. We can implement q = push(x, q) as follows. If the preﬁx of q contains 0 or 1 elements we allocate a new node to represent q make its child deque and its suﬃx identical to the child and suﬃx of q, respectively. The preﬁx of q is a newly

© 2005 by Chapman & Hall/CRC

31-20

Handbook of Data Structures and Applications

allocated preﬁx containing x and the element in the preﬁx of q, if the preﬁx of q contained one element. We return a pointer the new node which represents q . For an example consider version V2 shown in Figure 31.3 that was obtained from version V1 by a case of inject symmetric to the case of the push just described. The hard case of the push is when the preﬁx of q already contains two elements. In this case we make a pair containing these two elements and push this pair recursively into child(q). Then we allocate a new node to represent q , make its suﬃx identical to the suﬃx of q, make the deque returned by the recursive push to child(q) the child of q , and make the preﬁx of q be a newly allocated preﬁx containing x. For an example consider version V3 shown in Figure 31.3 that was obtained from version V2 by a recursive case of inject symmetric to the recursive case of the push just described. The implementations of pop and eject is symmetric. This implementation is clearly purely functional and therefore fully persistent. However the time and space bounds per operation are O(log n). The same bounds as one gets by using search trees to represent the deques with the path copying technique. These logarithmic time bounds are by far oﬀ from the ephemeral O(1) time and space bounds. Notice that there is a clear correspondence between this data structure and binary counters. If we think of a buﬀer with two elements as the digit 1, and of any other buﬀer as the digit 0, then the implementation of push(q) is similar to adding one to the binary number deﬁned by the preﬁxes of the queues childi (q). It follows that if we are only interested in partially persistent deques then this implementation has O(1) amortized time bound per operation (see the discussion of binary counters in the next section). To make this simulation eﬃcient in a fully persistent setting and even in the worst case, Kaplan and Tarjan suggested to use redundant counters.

31.4.1

Redundant Binary Counters

To simplify the presentation we describe redundant binary counters, but the ideas carry over to any basis. Consider ﬁrst the regular binary representation of an integer i. To obtain from this representation the representation of i + 1 we ﬁrst ﬂip the rightmost digit. If we ﬂipped a 1 to 0 then we repeat the process on the next digit to the left. Obviously, this process can be long for some integers. But it is straightforward to show that if we carry out a sequence of such increments starting from zero then on average only a constant number of digits change per increment.∗∗ Redundant binary representations (or counters as we will call them) address the problem of how to represent i so we can obtain a representation of i + 1 while changing only a constant number of digits in the worst case. A redundant binary representation, d, of a non-negative integer x is a sequence of digits n dn , . . . , d0 , with di ∈ {0, 1, . . . , 2}, such that x = i=0 di 2i . We call d regular if, between any two digits equal to 2, there is a 0, and there is a 0 between the rightmost 2 and the least signiﬁcant digit. Notice that the traditional binary representation of each integer (which does not use the digit 2) is regular . In the sequel when we refer to a regular representation we mean a regular redundant binary representation, unless we explicitly state otherwise. Suppose we have a regular representation of i. We can obtain a regular representation of i + 1 as follows. First we increment the rightmost digit. Note that since the representation of i is regular, its rightmost digit is either 0 or 1. So after the increment the rightmost digit

∗∗ The rightmost digit changes every increment, the digit to it left changes every other operation, and so on.

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-21

is either 1 or 2 and we still have a redundant binary representation for i + 1. Our concern is that this representation of i + 1 may not be regular. However, since the representation of i we started out with was regular the only violation to regularity that we may have in the representation of i + 1 is lacking a 0 between the rightmost 2 and the least signiﬁcant digit. It is easy to check that between any two digits equal to 2, there still is a 0, by the regularity of i. We can change the representation of i + 1 to a representation which is guaranteed to be regular by a simple ﬁx operation. A ﬁx operation on a digit di = 2 increments di+1 by 1 and sets di to 0, producing a new regular representation d representing the same number as d.†† If after incrementing the rightmost digit we perform a ﬁx on the rightmost 2 then we switch to another representation of i + 1 that must be regular. We omit the proof here which is straightforward. It is clear that the increment together with the ﬁx that may follow change at most three digits. Therefore redundant binary representations allow to perform an increment while changing constantly many digits. However notice that in any application of this numbering system we will also need a representation that allows to get to the digits which we need to ﬁx eﬃciently. We show one such representation in the next section. These redundant representations can be extended so we can also decrement it while changing only a constant number of digits, or even more generally so that we can increment or decrement any digit (add or subtract 2i ) while changing a constant number of other digits. These additional properties of the counters were exploited by other applications (see e.g. [22, 24]).

31.4.2

Persistent Deques

Kaplan and Tarjan use this redundant binary system to improve the deque implementation we described above as follows. We allow each of the preﬁxes and suﬃxes to contain between 0 and 5 elements. We label each buﬀer, and each deque, by one of the digits 0, 1, and 2. We label a buﬀer 0 if it has two or three elements, we label it 1 if it has one or four elements, and we label it 2 if it has zero or ﬁve elements. Observe that we can add one element to or delete one element from a buﬀer labeled 0 or 1 without violating its size constraint: A buﬀer labeled 0 may change its label to 1, and a buﬀer labeled 1 may change its label to 2. (In fact a 1 can also be changed to 0 but this may not violate regularity.) The label of a deque is the larger among the labels of its buﬀers, unless its child and one of its buﬀers are empty, in which case the label of the deque is identical to the label of its nonempty buﬀer. This coloring of the deques maps each deque to a redundant binary representation. The least signiﬁcant digit of this representation is the digit of q, the next signiﬁcant digit is the digit of child(q), and, in general, the ith signiﬁcant digit is the digit corresponding to childi (q) if the latter is not empty. We impose an additional constraint on the deques and require that the redundant binary representation of any top-level deque is regular. A regular top-level deque is labeled 0 or 1 which implies that both its preﬁx and its suﬃx are labeled 0 or 1. This means that any deque operation can be performed by operating on the appropriate top-level buﬀer. Suppose that the operation is either a push or a pop, the case of inject and eject is symmetric. We can construct the resulting queue q by setting child(q ) = child(q) and suf f ix(q ) = suf f ix(q). The preﬁx of q is a newly allocated buﬀer that contains the elements in pref ix(q) together with the new element in case of push or

†† We

use the fix only when we know that di+1 is either 0 or 1.

© 2005 by Chapman & Hall/CRC

31-22

Handbook of Data Structures and Applications

without the ﬁrst element in case of pop. Clearly all these manipulations take constant time. The label of q , however, may be one larger than the label of q. So the redundant binary representation corresponding to q is either the same as the redundant binary representation of q in which case it is regular, or it is obtained from the redundant binary representation of q by incrementing the least signiﬁcant digit. (The least signiﬁcant digit can also decrease in which case regularity is also preserved.) This corresponds to the ﬁrst step in the increment procedure for redundant regular representations described in the previous section. To make the redundant binary representation of q regular we may have to apply a ﬁx operation. Let i be the minimum such that childi (q ) is labeled 2. If for all j < i, childj (q ) is labeled 1 then the ﬁx has to change the label of childi (q ) to 0 and increment the label of childi+1 (q ). Fortunately, we have an appropriate interpretation for such a ﬁx. Assume childi+1 (q ) have a non-empty child. (We omit the discussion of the case where childi+1 (q ) have an empty child which is similar.) We know that the label of childi+1 (q ) is either 0 or 1 so neither of its buﬀers is empty or full. If the preﬁx of childi (q ) has at least four elements we eject 2 of these elements and push them as a single pair to the preﬁx of childi+1 (q ). If the preﬁx of childi (q ) has at most one element we pop a pair from the preﬁx of childi+1 (q ) and inject the components of the pair into the preﬁx of childi (q ). This makes the preﬁx of childi (q ) containing either two or three elements. Similarly by popping a pair from or pushing a pair to the suﬃx of childi (q ), and injecting a pair to or ejecting a pair from the suﬃx of childi+1 (q ) we make the suﬃx of childi (q ) containing two or three elements. As a result the label of childi (q ) and its two buﬀers becomes 0 while possibly increasing the label of one or both buﬀers of childi+1 (q ) and thereby the label of childi+1 (q ) as well. There is one missing piece for this simulation to work eﬃciently. The topmost deque labeled 2 may be arbitrarily deep in the recursive structure of q , since it can be separated from the top level by many deques labeled 1. To implement the ﬁx eﬃciently we have to be able to ﬁnd this deque fast and change it in a purely functional way by copying the deques that change without having to copy all their ancestors deques. For this reason we do not represent a deque in the obvious way, as a stack of preﬁx-suﬃx pairs. Instead, we break this stack up into substacks. There is one substack for the toplevel deque and one for each descendant deque labeled 0 or 2 not at the top level. Each substack consists of a top-level, or a deque labeled 0, or a deque labeled 2 and all consecutive proper descendant deques labeled 1. We represent the entire deque by a stack of substacks of preﬁx-suﬃx pairs using this partition into substacks. This can be realized with four pointers per each node representing a deque at some level. Two of the pointers are to the preﬁx and suﬃx of the deque. One pointer is to the node for the child deque if this deque is non-empty and labeled 1. One pointer is to the node of the nearest proper descendant deque not labeled 1, if such a deque exists and q itself is not labeled 1 or top-level. See Figure 4.2. A single deque operation will require access to at most the top three substacks, and to at most the top two elements in any such substack. The label changes caused by a deque operation produce only minor changes to the stack partition into substacks, changes that can be made in constant time. In particular, changing the label of the top-level deque does not aﬀect the partition into substacks. Changing the label of the topmost deque which is labeled 2 to 0 and the label of its child from 1 to 2 splits one substack into its ﬁrst element, now a new substack, and the rest. This is just a substack pop operation. Changing the label of the topmost deque which is labeled 2 to 0 and the label of its child from 0 to 1 merges a singleton substack with the substack under it. This is just a substack push operation. To add catenation, Kaplan and Tarjan had to change the deﬁnition of the data structure and allow deques to be stored as components of elements of recursive deques. The redundant

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

31-23

FIGURE 31.4: Pointer representation of stack of substacks structure. Each circle corresponds to a deque and it is marked by its label. Each buﬀer is a rectangle which is marked by its label. Triangles denote complete binary trees of elements whose depths depend on the level. This particular queue is represented by a stack of three substacks. binary numbering system, however, still plays a key role. To represent a catenable deque, Kaplan and Tarjan use noncatenable deques as the basic building blocks. They deﬁne a triple over a set A recursively as a preﬁx of elements of A, a possibly empty deque of triples over A, and a suﬃx of elements of A, where each preﬁx or suﬃx is a noncatenable deque. Then, they represent a catenable deque of elements from A by either one or two triples over A. The underlying skeleton of this structure is a binary tree (or two binary trees) of triples. The redundant binary number system is extended so that it can distribute work along these trees by adding an extra digit. Kaplan, Okasaki, and Tarjan [21] simpliﬁed these data structures at the expense of making the time bounds amortized rather than worst case and using assignment, thus obtaining a conﬂuently persistent data structure which is not purely functional. The key idea underlying their data structure is to relax the rigid constraint of maintaining regularity. Instead, we “improve” the representation of a deque q with full or empty preﬁx when we try to push

© 2005 by Chapman & Hall/CRC

31-24

Handbook of Data Structures and Applications

or pop an element from it. Similarly, with full or empty suﬃx. This improvement in the representation of q is visible to all deques that contain q as a subdeque at some level and prevents from pushing into deques with full preﬁxes or popping from deques with empty preﬁxes from happening too often. More speciﬁcally, assume that we push into a deque q with full preﬁx. First, we eject two elements from this preﬁx, make a pair containing them, and push the pair recursively into child(q). Let the result of the recursive push be child (q). Then we change the representation of q so that it has a new preﬁx which contains all the elements in the preﬁx of q but the two which we ejected, and its child deque is child (q). The suﬃx of q does not change. Finally we perform the push into q by creating a new queue q that has the same suﬃx and child deque as q, but has a new preﬁx that contains the elements in the preﬁx of q together with the new element. A careful but simple analysis shows that each operation in this implementation takes O(1) amortized time. By extending this idea, Kaplan, Okasaki, and Tarjan managed to construct catenable deques using only constant size buﬀers as the basic building blocks.

31.5

Concluding Remarks and Open Questions

Much progress has been made on persistent data structures since the seminal paper of Driscoll et al. [18]. This progress has three folds: In developing general techniques to make any data structure persistent, in making speciﬁc data structures persistent, and in emerging algorithmic applications. Techniques developed to address these challenges sometimes proved useful for other applications as well. This algorithmic ﬁeld still comprise intriguing challenges. In developing general techniques to make data structures persistent, a notable challenge is to ﬁnd a way to make the time slowdown of the node splitting method worst case. Another interesting research track is how to restrict the operations that combine versions in a conﬂuently persistent setting so that better time bounds, or simpler simulations, are possible. We also believe that the techniques and data structures developed in this ﬁeld would prove useful for numerous forthcoming applications.

Acknowledgment This work was supported, in part, by the Israel Science Foundation (ISF) under grant 548/00.

References [1] S. Alstrup, G. S. Brodal, I. L. Gørtz, and T. Rauhe. Time and space eﬃcient multimethod dispatching. In Proc. 8th Scandinavian Workshop on Algorithm Theory, volume 2368 of Lecture Notes in Computer Science, pages 20–29. Springer, 2002. [2] M. A. Bender, R. Cole, E. D. Demaine, M. Farach-Colton, and J. Zito. Two simpliﬁed algorithms for maintaining order in a list. In Proc. 10th Annual European Symposium on Algorithms (ESA 2002), volume 2461 of Lecture Notes in Computer Science, pages 152–164. Springer, 2002. [3] A. Boroujerdi and B. Moret. Persistence in computational geometry. In Proc. 7th Canadian Conf. Comp. Geometry (CCCG 95), pages 241–246, 1995. [4] P. Bozanis, N. Kitsios, C. Makris, and A. Tsakalidis. The space-optimal version of

© 2005 by Chapman & Hall/CRC

Persistent Data Structures

[5] [6] [7] [8] [9]

[10] [11] [12]

[13]

[14]

[15] [16] [17] [18] [19] [20]

[21] [22]

[23] [24]

[25] [26]

31-25

a known rectangle enclosure reporting algorithm. Information Processing Letters, 61(1):37–41, 1997. G. S. Brodal. Partially persistent data structures of bounded degree with constant update time. Nordic Journal of Computing, 3(3):238–255, 1996. G. S. Brodal and C. Okasaki. Optimal purely functional priority queues. Journal of Functional Programming, 6(6):839–858, 1996. A. L. Buchsbaum and R. E. Tarjan. Conﬂuently persistent deques via data structural bootstrapping. J. of Algorithms, 18:513–547, 1995. B. Chazelle. How to search in history. Information and control, 64:77–99, 1985. M. J. Clancy and D. E. Knuth. A programming and problem-solving seminar. Technical Report STAN-CS-77-606, Department of Computer Science, Stanford University, Palo Alto, 1977. R. Cole. Searching and storing similar lists. J. of Algorithms, 7:202–220, 1986. P. F. Dietz and D. D. Sleator. Two algorithms for maintaining order in a list. In Proc. 19th Annual ACM Symposium on Theory of Computing, pages 365–372, 1987. Paul F. Dietz. Fully persistent arrays. In Proc. 1st Worksh. Algorithms and Data Structures (WADS 1989), volume 382 of Lecture Notes in Computer Science, pages 67–74. Springer, 1989. Paul F. Dietz and Rajeev Raman. Persistence, amortization and randomization. In Proc. 2nd annual ACM-SIAM symposium on Discrete algorithms, pages 78–88. Society for Industrial and Applied Mathematics, 1991. M. Dietzfelbinger, A. Karlin, K. Mehlhorn, M. Meyer auf der Heide, H. Rohnert, and R.E. Tarjan. Dynamic perfect hashing: Upper and lower bounds. SIAM J. on Computing, 23(4):738–761, 1994. D. P. Dobkin and R. J. Lipton. Multidimensional searching problems. SIAM J. on Computing, 5(2):181–186, 1976. D. P. Dobkin and J. I. Munro. Eﬃcient uses of the past. J. of Algorithms, 6:455–465, 1985. J. Driscoll, D. Sleator, and R. Tarjan. Fully persistent lists with catenation. Journal of the ACM, 41(5):943–959, 1994. J. R. Driscoll, N. Sarnak, D. Sleator, and R. Tarjan. Making data structures persistent. J. of Computer and System Science, 38:86–124, 1989. Amos Fiat and Haim Kaplan. Making data structures conﬂuently persistent. Journal of Algorithms, 48(1):16–58, 2003. Symposium on Discrete Algorithms. P. Gupta, R. Janardan, H. M. Smid, and B. DasGupta. The rectangle enclosure and point-dominance problems revisited. International Journal of Computational Geometry and Applications, 7(5):437–455, 1997. H. Kaplan, C. Okasaki, and R. E. Tarjan. Simple conﬂuently persistent catenable lists. Siam J. on Computing, 30(3):965–977, 2000. H. Kaplan and R. E. Tarjan. Purely functional representations of catenable sorted lists. In Proc. 28th Annual ACM Symposium on Theory of Computing, pages 202–211. ACM Press, 1996. H. Kaplan and R. E. Tarjan. Purely functional, real-time deques with catenation. Journal of the ACM, 46(5):577–603, 1999. Haim Kaplan, Nira Shafrir, and Robert Endre Tarjan. Meldable heaps and boolean union-ﬁnd. In Proc. 34th Annual ACM Symposium on Theory of Computing (STOC), pages 573–582, 2002. N. Kitsios and A. Tsakalidis. Space reduction and an extension for a hidden line elimination algorithm. Computational Geometry, 6(6):397–404, 1996. E. M. McCreight. Priority search trees. Siam J. on Computing, 14:257–276, 1985.

© 2005 by Chapman & Hall/CRC

31-26

Handbook of Data Structures and Applications

[27] O. Nurmi. A fast line sweep algorithm for hidden line elimination. BIT, 25(3):466–472, 1985. [28] C. Okasaki. Amortization, lazy evaluation, and persistence: Lists with catenation via lazy linking. In IEEE Symposium on Foundations of Computer Science, pages 646–654, 1995. [29] M. H. Overmars. Searching in the past, I. Technical Report RUU-CS-81-7, Department of Computer Science, University of Utrecht, Utrecht, The Netherlands, 1981. [30] N. Sarnak and R. E. Tarjan. Planar point location using persistent search trees. Communications of the ACM, 29(7):669–679, 1986. [31] R. E. Tarjan. Data Structures and Network algorithms. SIAM, Philadelphia, 1982. [32] R. E. Tarjan and J. Van Leeuwen. Worst case analysis of set union algorithms. Journal of the ACM, 31:245–281, 1984. [33] P. van Emde Boaz. Preserving order in a forest in less than logarithmic time. Information Processing Letters, 6(3):80–82, 1977. [34] P. van Emde Boaz, R. Kaas, and E. Zijlstra. Design and implementation of an eﬃcient priority queue. Mathematical Systems Theory, 10:99–127, 1977.

© 2005 by Chapman & Hall/CRC

32 PQ Trees, PC Trees, and Planar Graphs 32.1 32.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Consecutive-Ones Problem . . . . . . . . . . . . . . . . . .

32-1 32-6

A Data Structure for Representing the PC Tree • Finding the Terminal Path Eﬃciently • Performing the Update Step on the Terminal Path Eﬃciently • The Linear Time Bound

32.3

Wen-Lian Hsu Academia Sinica

Ross M. McConnell Colorado State University

32.1

Planar Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-14 Preliminaries • The Strategy • Implementing the Recursive Step • Diﬀerences between the Original PQ-Tree and the New PC-Tree Approaches • Returning a Kuratowski Subgraph when G is Non-Planar

32.4

Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-26

Introduction

A graph is planar if it is possible to draw it on a plane so that no edges intersect, except at endpoints. Such a drawing is called a planar embedding. Not all graphs are planar: Figure 32.1 gives examples of two graphs that are not planar. They are known as K5 , the complete graph on ﬁve vertices, and K3,3 , the complete bipartite graph on two sets of size 3. No matter what kind of convoluted curves are chosen to represent the edges, the attempt to embed them always fails when the last of the edges cannot be inserted without crossing over some other edge, as illustrated in the ﬁgure. There is considerable practical interest in algorithms for ﬁnding planar embeddings of planar graphs. An example of an application of this problem is where an engineer wishes to embed a network of components on a chip. The components are represented by wires, and no two wires may cross without creating a short circuit. This problem can be solved by treating the network as a graph and ﬁnding a planar embedding of it. Planar graphs play a central role in geographic information systems, and in many problems in computational geometry. The study of planar graphs dates to Euler. The faces of an embedding are connected regions of the plane that are separated from each other by cycles of G. Euler showed that for any planar embedding, if V is the set of vertices, E the set of edges, F the set of faces (regions of the plane that are connected in the embedding), and C the set of connected components of the graph, then |V | + |F | = |E| + |C| + 1. Many other results about planar 32-1

© 2005 by Chapman & Hall/CRC

32-2

Handbook of Data Structures and Applications

FIGURE 32.1: Two non-planar graphs. The ﬁrst is the K5 , the complete graph on ﬁve vertices, and the second is the K3,3 , the complete bipartite class on two sets of three vertices each. Any attempt to embed them in the plane fails when a ﬁnal edge cannot be inserted without crossing the boundary between two faces. graphs can be proven using this formula. For instance, using the formula, it is easily proven with counting arguments that K5 and K3,3 are non-planar [12]. The famous 4-color theorem states that the vertices of a planar graph can always be partitioned into four independent sets; an equivalent statement is that a mapmaker never needs to use more than four colors to color countries on a map so that adjacent countries are of diﬀerent colors. It remained open in the literature for almost 100 years and was ﬁnally proven with the aid of a computer program in 1976 [1, 2]. A subdivision of an edge xy of a graph is obtained by creating a new node z, and replacing xy with new edges xz and zy. The inverse of this operation is the contraction of z, and only operates on vertices of degree 2. A subdivision of a graph is any graph that can be obtained from it by a sequence of subdivision operations. Since K5 and K3,3 are non-planar, it is obvious that subdivisions of these graphs are also non-planar. Therefore, a graph that has a subgraph that is a subdivision of K5 or K3,3 as a subgraph must be non-planar. Such a subgraph is said to be homeomorphic to a K3,3 or a K5 . A famous results in graph theory is the theorem of Kuratowski [21], which states that the absence of a subdivision of a K5 or a K3,3 is also suﬃcient for a graph to be planar. That is, a graph is planar if and only if it has no subgraph that is a subdivision of K3,3 or K5 . Such a subdivision is known as a Kuratowski subgraph. A certifying algorithm for a decision problem is one that produces an accompanying piece of evidence, or certiﬁcate that proves that its answer is correct. The certiﬁcate should be simple to check, or authenticate. Certifying algorithms are highly desirable in practice, where the possibility must be considered that an implementation has a bug and a simple yes or no answer cannot be entirely trusted unless it is accompanied by a certiﬁcate. The issue is discussed at length in [20]. Below, we describe a certifying algorithm for recognizing planar graphs. The algorithm produces either a planar embedding of the graph, proving that the graph is planar, or points out a Kuratowski subgraph, proving that it is not. Next, let us consider a problem that is seemingly unrelated to that of ﬁnding a planar embedding of a graph, but which can be solved with similar data structures. Given a set S of intervals of a line, let their interval graph be the graph that has one vertex for each of the intervals in S, and an edge between two vertices if their intervals intersect. That

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-3 a

c

a b

b

e d

f

c

g e

d f

g

FIGURE 32.2: An interval graph is the intersection graph of a set of intervals on a line. There is one vertex for each of the intervals, and two vertices are adjacent if and only if the corresponding intervals intersect. is, a graph is an interval graph if it is the intersection graph of a set of intervals on a line. Figure 32.2 gives an illustration. Interval graphs also come up in a variety of other applications, such as scheduling jobs that conﬂict if they must be carried out during overlapping time intervals. If an interval representation is given, otherwise NP-complete problems, such as ﬁnding a maximum independent set, can be solved in linear time [9]. Given the intervals, it is trivial to construct their interval graph. However, we are interested in the inverse problem, where, given a graph G, one must ﬁnd a set of intervals that have G as their interval graph or else determine that G is not an interval graph. Interest in this problem began in the late 1950’s when the noted biologist Seymour Benzer used them to establish that genetic information is stored inside a biological structure that has a linear topology [3]; this topology arises from the now-familiar structure of DNA. To do this, he developed methods of inducing mutations using X-ray photons, which could be assumed to reﬂect damage to a contiguous region, and for testing whether two of these mutations had common eﬀects that indicated that the the damaged regions intersect. This gave rise naturally to a graph where each mutation is a vertex and where two vertices have an edge between them if they intersect. He got the result by showing that this graph is an interval graph. Let us say that such a set S is a realizer of the interval graph G if G is S’s interval graph. Benzer’s result initiated considerable interest in eﬃcient algorithms to ﬁnding realizers of interval graphs, since they give possible linear orderings of DNA fragments, or clones, given data about which fragments intersect [5, 10, 11, 16, 17, 19, 26–28]. A linear-time bound for the problem was ﬁrst given by Booth and Lueker in [5]. Though the existence of forbidden subgraphs of interval graphs has long been well-known [22], the ﬁrst linear-time certifying algorithm for recognizing interval graphs has only been given recently [20]; the certiﬁcate of acceptance is an interval realizer and the certiﬁcate of rejection is a forbidden subgraph. When the ordering of intervals is unique except for trivial details, such as the lengths of the intervals and the relative placement of endpoints that intersect, this solves the physical mapping problem on DNA clones: it tells how the clones are arranged on the genome. Eﬃcient algorithms for solving certain variations of this problem played a role in the assembling the genomes of organisms, and continue to play a signiﬁcant role in genetic research [39]. For input data containing errors, Lu and Hsu [23] give an error-tolerant algorithm for the clone assembly problem. A graph is a circular-arc graph if it is the intersection graph of a set of arcs on a circle. Booth conjectured that recognizing whether a graph is a circular-arc graph would turn out to be NP complete [4], but Tucker later found a polynomial-time algorithm [38]. McConnell has recently found a linear-time algorithm [29]. The problem of ﬁnding a certifying algorithm

© 2005 by Chapman & Hall/CRC

32-4

Handbook of Data Structures and Applications a

W

X

c

a b

Y

b

Z

c

e d

f

g

e

d f

g

a g c e d f b

WXYZ 1000 0001 1100 0111 0110 0011 1100

FIGURE 32.3: The clique matrix of a graph has one row for each vertex, one column for each maximal clique, and a 1 in row i column j iﬀ vertex i is contained in clique j. The maximal cliques of an interval graph correspond to points of maximal overlap in an interval representation. Ordering the columns of a clique matrix in the order in which they appear in an interval representation gives a consecutive-ones ordering of the clique matrix. for the problem remains open. Finding the maximal cliques of an arbitrary graph is hard: in fact it is NP complete to ﬁnd whether a graph has a clique of a given size k. However, if a graph is chordal it is possible to list out its maximal cliques in linear time [32], and interval graphs are chordal. (A chordal graph is one that has no simple cycle on four or more vertices as an induced subgraph.) We may therefore create a clique matrix, which has one row for each vertex of the graph, one column for each maximal clique, and a 1 in row i, column j iﬀ clique j contains vertex i. THEOREM 32.1 A chordal graph is an interval graph iﬀ there is a way to order the columns of its clique matrix so that, in every row, the 1’s are consecutive.

To see this, suppose G is an interval graph and S is a realizer. Then, for each maximal clique C, a clique point on the line can be selected that intersects the intervals that correspond to elements of C and no others. (See Figure 32.3.) Ordering the columns of the clique matrix according to the left-to-right order of the corresponding clique points ensures that the 1’s in each row will be consecutive. Conversely, given a consecutive-ones ordering, the 1’s in each row occupy an interval on the sequence of columns. It is easy to see that these intervals constitute a realizer of G, since two vertices are adjacent iﬀ they are members of a common maximal clique. Such an ordering of the columns of a 0-1 matrix is known as a consecutive-ones ordering, and a 0-1 matrix has the consecutive-ones property if there exists a consecutive-ones ordering of it. The main thrust of Booth and Lueker’s algorithm consists of an algorithm for determining whether there exists a a consecutive-ones ordering of the columns of a 0-1 matrix. Their algorithm operates on a sparse representation of the matrix, and solves this in time linear in the number of 1’s in the matrix. To test for the consecutive-ones property, they developed a representation, called a PQ tree, of all the consecutive-ones orderings of the columns. The tree consists of P nodes and Q nodes. The leaves of the tree are columns of the matrix, and the left-to-right leaf order of the tree gives a consecutive-ones ordering, just as it does when the order of children of a node are reversed, or when the order of children of a P node are permuted arbitrarily (see Figure 32.4). All consecutive-ones orderings of the columns can be obtained by a sequence of such rearrangements. The PQ tree helps with keeping track of possible consecutive-ones orientations as they work by induction on the number of rows of the matrix. Each interval realizer of G is given

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-5

P

{1}

P

Q

Q

{2} {3} {4}

P

{1}

{11} {12}{13}

{6} {7} Q

{5}

P

{2} {3} {4}

{8}{9}{10}

P

P {5}

{3} {2} {4}

{6} {7} Q

P

{11} {12}{13}

{8}{9}{10}

P

P

Q

Q

{6} {7} Q

{5}

P

{1}

Q

Q

{11} {12}{13}

{8}{9}{10}

{1}

Q

P

Q

Q {7} {6}

{10}{9}{8}

P {5}

{3} {2}

{11} {12}{13}

{4}

FIGURE 32.4: The leaves of a PQ tree are the columns of a consecutive-ones matrix. The left-to-right order of the leaves gives a consecutive-ones arrangement of the columns. So does the result of reversing the leaf descendants of a node. The order of leaves of a consecutive set of children of a P node can also be reversed to obtain a new consecutive-ones ordering. All consecutive-ones orderings can be obtained by a sequence of these reversals. by a consecutive-ones ordering, except for minor details that do not aﬀect the order of clique points. The literature on problems related to PQ trees is quite extensive. Korte and M¨ ohring [19] considered a modiﬁed PQ tree and a simpler incremental update of the tree. Klein and Reif [18] constructed eﬃcient parallel algorithms for manipulating PQ trees. Hsu gave a simple test that is not based on PQ trees [15]. McConnell gives a generalization of the PQ tree to arbitrary 0-1 matrices, gives a lineartime algorithm for producing it, and a linear-time certifying algorithm for recognizing the consecutive-ones property [25]. The PQ tree play an important role in the linear-time algorithm of Lempel, Even, and Cederbaum for ﬁnding a planar embedding of planar graphs [24]. The algorithm takes advantage of the PQ tree’s rich ability to represent families of linear orderings in order to keep track of possible arrangements of edges in an embedding of G. Booth and Lueker’s algorithm for constructing the PQ tree has a reputation for being diﬃcult to understand and to program, and the many algorithms that have appeared since reﬂect an eﬀort to address this concern. Their algorithm builds the tree by induction on the number of rows of the matrix. For each row, it must perform a second induction from the leaves toward the root. At each node encountered during this second induction, it uses one of nine templates for determining how the tree must change in the vicinity of the node. Recognizing which template must be used is quite challenging. Each template is actually a representative of a larger set of cases that must be dealt with explicitly by a program.

© 2005 by Chapman & Hall/CRC

32-6

Handbook of Data Structures and Applications

These templates carry over into the use of the PQ tree in planar graph embedding. The PC tree is an alternative introduced by Shih and Hsu [34] to address these diﬃculties. It is essentially the result of “unrooting” the PQ tree to obtain a free tree that awards no special status to any root node, and where notions of “up” and “down” in the tree have no meaning. This introduces a symmetry to the problem that is otherwise broken by the choice of the root, and once it is introduced, the various templates collapse down to a single case. This suggests that the cases that must be considered in the templates are an artifact of an arbitrary choice of a root in the tree. The reason that this was not recognized earlier may have more to do with the fact that rooted trees are ubiquitous as data structures, whereas free trees are not commonly used as data structures. The need to root such a data may simply have been an assumption that people failed to scrutinize. A matrix has the circular-ones property if the columns can be ordered so that, in every row, either the zeros are consecutive or the ones are consecutive. That is, it has the circular-ones property if the ones are consecutive when the matrix is wrapped around a vertical cylinder, which has the eﬀect of eliminating any special status to any column, such as being the leftmost column. Hsu [14] gives an algorithm using PC trees for solving the consecutive-ones problem. Hsu and McConnell [17] have shown that that both the PQ tree and the PC tree have remarkably simple deﬁnitions as mathematical objects. They are each precisely given by previously-known theorems on set families that had not previously been applied in this domain. Moreover, we show that the PC tree gives a representation of all circular-ones orderings of a matrix just as the PQ tree gives a representation of all consecutive-ones orderings. Figure 32.5 illustrates how the PC tree represents the circular-ones orderings. The leaves are the columns of the matrix, and are arrayed around the large circle, which represents the circular ordering. The C nodes (double circles) have a cyclic order on their edges that can be reversed. We could think of them as coins with edges attached at discrete points around the sides, and that can be turned heads-up or tails-up, an operation that we will call a ﬂip. The P nodes (black internal nodes) have no cyclic ordering. The circular-ones orderings of the columns of the matrix are just those that result from planar embeddings of this gadget that put the leaves on the outer circle. This description makes it obvious what family of circular orderings is represented: you can select an edge and reverse the order of all leaves that lie on one side of the edge, or you can reverse the order of a consecutive set of leaves if they are the leaves of a subset of the trees in the forest that would result from the removal of a P node. Booth and Lueker showed that testing for the circular-ones property reduces in linear time to testing for the consecutive-ones property. It appears to be more natural to perform the reduction in the opposite direction. That is, to solve the consecutive-ones problem reduce it to the circular-ones problem, which can be solved with the PC tree instead of with the PQ tree. To do this, just add the zero vector as a new column of the matrix, compute the PC tree for the new matrix, and then pick it up by the leaf corresponding to the new column to root it. (See Figure 32.6.) In [17], it is shown that the subtree rooted at its child is the PQ tree for the original matrix.

32.2

The Consecutive-Ones Problem

In this section, we give an algorithm that is related to Booth and Lueker’s algorithm, except that it uses the PC tree in place of the PQ tree.

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

21

20

19

32-7

18

22

15

1

14 13

2

12

3 4

11 6

21

20

16 15

1

14 13

2

12

3 4

11 10

5 6

9 7

17

23

10

5

9

8 19

18

21

17

22

15

1

14 13

2

12

3 4

11 8

5 6

7

8

20

19

17 16

23

15

1

14 13

2

8

3 4

9 5 6

7

10

18

22

16

23

18

22

16

23

19

20

21

17

9

7

12

11

10

FIGURE 32.5: The PC tree can be viewed as a gadget for generating the circular-ones orderings of the columns. The C nodes are represented by double circles and the P nodes are represented by black dots. The subtree lying at one side of an edge can be ﬂipped over to reverse the order of its leaves. The order of leaves of a consecutive set of subtrees that would result from the removal of a P node can also be reversed. All circular-ones orderings can be obtained by a sequence of such reversals.

x

y

x

y

FIGURE 32.6: Assigning a new zero column x to a matrix, computing the PC tree for it, and then picking the PC tree up at x to root it, gives the PQ tree for the matrix, rooted at y, when the C nodes are reinterpreted as Q nodes.

© 2005 by Chapman & Hall/CRC

32-8

Handbook of Data Structures and Applications

Let us say that two subsets X and Y of a domain V strongly overlap if X∩Y , X−Y ∪Y −X, and V − X − Y are all nonempty. We view the columns of a 0-1 matrix as a set V , and each row of the matrix as a subset of V consisting of those columns where there is a 1 in the row. A set X is an edge module if it is the union of leaves in one of the two subtrees that results when an edge is removed. It is a P module if it is not an edge module but the union of leaves in a subset of the trees formed when a P node is removed. An edge or P module is an unrooted module. The key to understanding the construction of the PC tree is the fact that the unrooted modules are precisely those nonempty proper subsets of V that do not strongly overlap any row of the matrix. We construct the PC tree by induction on the number of rows of a matrix. The ith step of the algorithm modiﬁes the PC tree so that it is correct for the submatrix consisting of the ﬁrst i rows of the matrix. As a base case, after the ﬁrst step, the PC tree consists of two adjacent P nodes, with one of them adjacent to the leaves that correspond to ones in the ﬁrst row and the other adjacent to the leaves that correspond to the zeros. During the ith step, no new unrooted modules are created by adding a row, but some unrooted modules in the ﬁrst i − 1 rows may become defunct as unrooted modules once the ith row is considered. It is necessary to modify the tree so that it no longer represents these sets as unrooted modules. Let the full leaves denote the leaves that correspond to ones in row i, and let the empty leaves denote those that correspond to zeros in row i. If an edge module X becomes defunct in the ith step, then X and X each contain both empty leaves and full leaves. Then X corresponds to an edge whose removal separates the PC tree into two trees, each of which has both full and empty leaves. Let us call such an edge a terminal edge. Terminal edges must be removed from the tree, since they correspond to defunct edge modules. If M has the circular ones property, these terminal edges form a path (See Figure 32.7). Let us call this path the terminal path. The terminal nodes are the nodes that lie at the ends of the terminal path. All nodes and edges that must be altered in Step i lie on the terminal path. When there is a unique node of the PC tree that has both full and empty neighbors, we consider it to be a terminal path of length 0; this node assumes the role of both terminal nodes. Algorithm 32.2 Constructing the PC Tree The initial PC tree is a P node that is adjacent to all leaves, which allows all (n − 1)! circular orderings. At each row: • Find the terminal path, and then perform ﬂips of C nodes and modify the cyclic order of edges incident to P nodes so that all ones lie on one side of the path (see Figure 32.8.) • Split each node on the path into two nodes, one adjacent to the edges to full leaves and one adjacent to the edges to empty leaves. • Delete the edges of the path and replace them with a new C node x whose cyclic order preserves the order of the nodes on this path. • Contract all edges from x to C-node neighbors, and any node that has only two neighbors.

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-9

0

0

1 1

0

t2

1

0

1

0

1 0

1

t1 0

1 1

0

FIGURE 32.7: The edges that must be modiﬁed when a new row is added are those that represent two sets that have a mixture of zeros and ones, as these sets fail the criterion for being unrooted modules in the new row. If the matrix has the circular-ones property, these edges lie on a path, called the terminal path. The terminal nodes are the nodes t1 and t2 that lie at the ends of the terminal path.

A. 1111 111

B. 1111 111

C. 111 11

111 11

x

x

000 00000 0000 000 00000 0000 FIGURE 32.8: To update the PC tree when a new row is added to the matrix, ﬂip the C nodes and order the P nodes on the terminal path so that the edges that go to trees whose leaves are zeros in the row lie on one side (white) and those that go to trees whose leaves are ones in the row lie on the other side (black). This is always possible if the new matrix has the circular-ones property (Figure A). Then divide each node on the terminal path into two parts, one that is adjacent to the black trees and one that is adjacent to the white trees (Figure B). Replace the edges of these two paths with a new C node, x, whose cyclic order reﬂects the order of nodes these two paths. Finally, contract each edge from x to a C-node neighbor, and contract each internal node of degree two (Figure C).

© 2005 by Chapman & Hall/CRC

32-10

Handbook of Data Structures and Applications

g

a x

b

y

e c

a g

f

d

f

z

b

e c

d

FIGURE 32.9: An order-preserving contraction of an edge xy. The neighbors of x and y are cyclically ordered. The edge is removed and x and y are identiﬁed, so that the cyclic order of neighbors of x and y about the edge is preserved.

32.2.1

A Data Structure for Representing the PC Tree

For the implementation, we pair up the n−1 edges with n−1 of the nodes of the tree, so that each edge is paired with one of the nodes that it is incident to. This can be accomplished by rooting the tree at an arbitrary node in order to deﬁne a parent function, and then pairing each non-root node with its parent edge. It is worth noting that in contrast to the rooting of the PC tree, which serves to give a distinguished role to the root, the sole purpose of this is to make low-level operations more eﬃcient. An example of such an operation is the problem of ﬁnding out whether two nodes of an unrooted tree are adjacent, which can be determined in O(1) time if it is rooted, by examining the parent pointers of the two nodes. An undirected graph is a special case of a directed graph where every arc (u, v) has a twin arc (v, u). Thus, we may speak of the directed arcs of the PC tree, not just its edges. The data structure for the PC tree is the following. Each P node carries a pointer to the parent edge. Each edge uv is implemented with two oppositely directed twin arcs (u, v) and (v, u). Each arc (x, y) has a pointer to its two neighbors in the cyclic order about y, a pointer to its twin, and a parent bit label that indicates whether y is the parent of x. In addition, if y is a P node, then (x, y) has a pointer to y. There is no explicit representation of a C node; its existence is implicit in the doubly-linked circular list of its incident edges that gives their cyclic order. No two C nodes are adjacent, so each of these edges has one end that identiﬁes a neighbor of the C node, and another end that indicates that the end is incident to a C node, without identifying the C node.

DEFINITION 32.1

If (x, y) is an arc directed into y and y is a C node, then y is not represented by an explicit record. We can ﬁnd y’s parent edge by cycling through the the records for arcs that are directed into y in either cyclic direction about y, until we reach an arc with the required parent bit. Thus, ﬁnding a C node’s parent edge is not an O(1) operation. The data structure makes no distinction between the two directions in which a list can be traversed; this distinction is made only at the time when a traversal is begun. One must keep track of both the current and previous element. To move to the next element, one must retrieve both neighbors of the current element, and select the one that is diﬀerent from the previous element. Since we will deal with unrooted trees whose internal nodes can be cyclically ordered, it will be useful to deﬁne the cyclic order of edges incident to z after the contraction. An order-preserving contraction is the one depicted in Figure 32.9, where the neighbors x and y are each consecutive and preserve their original adjacencies in the circular order of z’s

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-11

neighbors. Using this data structure, it takes O(1) time to remove or insert a section of a list, given pointers to the endpoints. Since the list draws no distinction between forward and backward, a section of a list can be inserted in either order in O(1) time. It therefore supports an order-preserving contraction of an edge between two adjacent C nodes x and y in O(1) time, given a pointer to (x, y), in addition to allowing insertion or removal of an edge from a node’s circular adjacency list or reversal of a section of a circular list in O(1) time

32.2.2

Finding the Terminal Path Eﬃciently

Finding the terminal path is the only step where pointers to parent edges are required in the ith iteration. Recall that we have deﬁned full and empty leaves of the PC tree. For the internal nodes, let us say that a node is full if it is possible to root the tree so that all leaves in the subtree rooted at the node are full, and empty if it is possible to root the tree so that all leaves in its subtree are empty. Since each node has degree at least three, at most one of these designations applies at a node. We use the following full-partial labeling algorithm to mark the full nodes. The eﬃciency of the algorithm is due to the fact that it avoids touching some of the empty nodes; it leaves them unmarked. We label a leaf as full if it corresponds to a column with a one in the ith row. We label an internal node as full if all of its neighbors except one have been labeled full. We label an internal node as partial if at least one of its neighbors has been labeled full. Whenever we label a node as full, we increment a counter in its non-full neighbor x that records how many full neighbors x has, labeling x as full if this counter rises to one less than the degree of x. However, if x is a C node, then since it is given implicitly by a circular list of neighbors, we do not keep an explicit counter at x. Nevertheless, it is easy to detect when all of its neighbors except one is full. Recall that no two C nodes are adjacent. To perform the labeling in the presence of C nodes, we use an unrooted variant of the pointer borrowing strategy of [5]. We maintain block-spanning pointers from the ﬁrst to last vertex and from the last to the ﬁrst vertex in each consecutive block of full neighbors around the cycle that makes up x. Each time a new y neighbor of x becomes full, either y becomes a one-element block, a block is extended by appending or prepending y, or two blocks and y merged, by appending y to one of the blocks and prepending it to the other. Each of these operations gives access in O(1) time to the ﬁrst or last vertex in each aﬀected block, so it is trivial to update the block-spanning pointers in O(1) time. A test of whether the ﬁrst and last vertices in the resulting block share a non-full neighbor z on the cycle takes O(1) time. If x passes this test, it is full, and the full-neighbor counter of z is incremented. Since every node of the PC tree has degree at least three, the number of full leaves is at least as great as the number of full internal nodes, and there are at most k full leaves. Assigning full labels takes O(k) time. The number of partial nodes is at most as great as the number of full nodes, since each full node has at most one partial neighbor. Assigning partial labels takes O(k) time also. Henceforth, let us call a node full or partial according to the ﬁnal label assigned to it by the full-partial labeling algorithm. The key insight for ﬁnding the terminal edges is the observation that an edge is terminal if and only if it lies on a path in the tree between two partial nodes. In the special case where there are no terminal edges and the terminal path has length 0, it is the unique node that has both full and unmarked neighbors. It is easy to see that since there are no other such nodes, its unmarked neighbors are empty. This node is easy

© 2005 by Chapman & Hall/CRC

32-12

Handbook of Data Structures and Applications

to ﬁnd, given the marking of the nodes. Otherwise, let the apex be the least common ancestor of the partial nodes. We ﬁnd the terminal edges by starting at each partial node and extending a path up through its ancestors, marking edges on the path. We do this in parallel at all partial nodes, extending the paths at the same rate. When a path runs into another partial node, we stop extending that path. If a path extends above the apex, we may or may not detect this right away. Eventually, we will be extending only one path, at which point, the marked edges form a connected subtree. The apex is the ﬁrst point below the highest point of this subtree that is either partial or has two paths entering it. Unmarking the edges from the marked edge down to the apex leaves edges marked iﬀ they are terminal edges. If x is a node on the terminal path other than the apex, then the parent of x is also on the terminal path. If x is a P node, this takes O(1) time, since it has a pointer to its parent. If x is a partial C node that has a full neighbor, we may assume that we have a pointer to the edge to this neighbor, since this is provided by the full-partial labeling algorithm. This is always the case at a terminal node, which has a full neighbor and an empty neighbor. As we climb the terminal path toward the apex, when reaching a C node y from its child x on the terminal path, we obtain a pointer to the edge (x, y), since x is a P node and (x, y) is its parent edge. We obtain pointer even if y has no full neighbor. The key to bounding the cost of ﬁnding x’s parent when x is a C node on the terminal path is the observation that if it has any full neighbors, the full neighbors are consecutive, and the edges to its neighbors on the terminal path are adjacent to the full neighbors in the cyclic order. Thus, if it has no full neighbor, we can look at the two neighbors of the child edge in the cyclic order, and one of them must be the parent edge. This takes O(1) time. If x has a full neighbor, then we can cycle clockwise and counterclockwise through the edges to full neighbors. Of the ﬁrst edges clockwise and counter-clockwise that are not to full neighbors, one of these is the parent. In this case, the cost of ﬁnding the parent is proportional to the number of full neighbors x. If x does not lie on the terminal path, then this procedure may fail, in which case we detect that it is not on the terminal path, or it may succeed, in which case we can bound the cost of ﬁnding the parent in the same way. If the union of all paths traversed has p nodes and there are k ones in row i, then the total cost is O(p + k). However, the number of nodes in these paths that are not on the terminal path is at most the number of nodes that are on the terminal path, because of the way the paths are extended in parallel. The following summarizes these observations. If the terminal edges form a path and the full and empty neighbors can be ﬂipped to opposite sides of it, then ﬁnding the terminal path in the ith step takes O(p + k) time, where p is the length of the terminal path and k is the number of full nodes. LEMMA 32.1

If the conditions of the lemma are not satisﬁed, the matrix does not have the circular-ones property, and is rejected.

32.2.3

Performing the Update Step on the Terminal Path Eﬃciently

The number of full neighbors of nodes on the terminal path is bounded by the number k of ones in the ith row. Before splitting a node, we record its neighbors on the terminal path, and then delete the edges to these neighbors, in O(1) time. We then split the node by splicing out the full neighbors, and forming a new node with them. The remainder of the old node serves as the other half of the split. This takes time proportional to the number of

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-13

full neighbors. Since the number of full neighbors of nodes on the terminal path is bounded by the number of ones in the ith row, the total time for this is O(p + k). Creating the new C node x and installing edges to the split nodes in the required cyclic order then takes O(p) time. Since our data structure includes a parent function, we must assign the parent bits to the new edges. Let y be the copy of the apex that retains its parent edge after the split of the apex. Except in the case of the apex, the parent edge of every vertex on the terminal path is an edge of the terminal path, and these edges have been deleted. Thus, none of these nodes have a parent edge. We make x the new parent of these nodes, and we let y be the parent of x. This takes O(p) time by setting the appropriate bits in the O(p) edges incident to x. The operation of deleting a C node z from x’s neighborhood and replacing it with the neighbors of z is just a contraction of the edge xz, depicted in Figure 32.9, which takes O(1) time. These observations can be summarized as follows: LEMMA 32.2 Updating the tree during the ith step takes O(p + k) time, where p is the length of the terminal path and k is the number of full nodes.

32.2.4

The Linear Time Bound

Assume that the matrix is given in sparse form, where, for each row, the set of columns where the row has a one is listed. Let us assume that every row and every column has at least one nonzero entry, since it can otherwise be eliminated in a preprocessing step. A linear time bound is one that is proportional to the number of nonzero entries in the matrix. The algorithm processes one row at a time of the matrix M . Let T denote the current state of the PC tree after the ﬁrst i rows have been processed. That is, T is the PC tree for the submatrix induced by the ﬁrst i rows. Let Ci be the set of C nodes and let Pi be the set of Pi nodes in T , and let ui be the number of ones in the rows of the matrix that have not yet been processed. If x is a node of T , let deg(x) denote the degree, or number of neighbors of x in T . If, when processing a row, we could update the PC tree in time proportional to the number of ones in the row, the linear time bound would be immediate. Unfortunately, the update step does not conform to this bound. Therefore, we use a technique called amortized analysis [9], which uses an accounting scheme whereby updates that exceed this bound borrow credits from updates that were completed with time to spare. The analysis shows that, even though there is variability in the time required by the updates, the aggregate cost of all updates is linear. We adopt a budget where we keep an account that must have a number of credits φ(M, i) in reserve, where φ(N, i) is given by the following: • φ(M, i) = 2ui + |Ci | + x∈Pi (deg(x) − 1). Such a function is often called a potential function. Each credit can pay an O(1) operation. Any operation that reduces φ allows us to withdraw credits from the account to pay for some of the operations. Since φ(M, 0) is Θ(m), we must pre-pay the cost of later operations by making a deposit of Θ(m) credits to the account. If we can maintain this reserve as we progress and still pay for all operations with withdrawals, then, since φ never runs the account to zero, the running time of the algorithm is O(m). To cover the costs in row i, we must be able to withdraw k + p credits, by Lemmas 32.1 and 32.2, where k is the number of full nodes. Since every full node has at least two full

© 2005 by Chapman & Hall/CRC

32-14

Handbook of Data Structures and Applications

neighbors, the number of marked nodes is at most two times the number of 1’s in row i, so k credits are freed up by the decrease from 2ui to 2ui+1 . Each C node on the terminal path is ﬁrst split, but then both of these copies are contracted. This decreases the number of C nodes by one without changing the degrees of any P nodes, so spending a credit for each C node on the path is within the budget. Suppose a P node does not lie at the end of the terminal path. If it is split, the sum of degrees of the two parts is the same as the degree of the original, after the terminal-path edges are deleted and replaced with an edge to the new C node. However, in calculating φ, subtracting one from the degrees of two P nodes instead of one frees a credit. If the P node has only empty neighbors or only full neighbors, it is not split. In this case its degree decreases by one when its two incident terminal-path edges are deleted and replaced by a single edge to the new C node. A P node at the end of the terminal path fails to free up a credit, but there are only O(1) of these. Contractions of nodes of degree two free up a credit, whether they are C nodes or P nodes. Θ(k + p) credits for row i can be paid out while adhering to the budget.

32.3

Planar Graphs

In this section, we describe an algorithm due to Shih and Hsu [34] that uses PC trees to recognize whether a graph H is planar. If it is, the algorithm returns a planar embedding, and if it is not, it points out a subgraph that is a subdivision of a K3,3 or a K5 . Linear time planarity test was ﬁrst established by Hopcroft and Tarjan [13] based on a path addition approach, which ﬁnds a path in the graph and uses it to break the problem down recursively. A vertex addition approach, originally developed by Lempel, Even and Cederbaum [24], was later improved by Booth and Lueker [5] (hereafter, referred to as the B&L algorithm) to run in linear time using PQ trees. This approach adds one vertex at a time, updating the PQ tree to keep track of possible embeddings of the subgraph induced by vertices added so far. Both of these approaches are quite complex. Furthermore, both approaches use separate algorithms for recognition and embedding (Chiba et al [8]). Several other approaches have also been developed for simplifying the planarity test (see for example [7, 31, 35, 36]) and the embedding algorithm [6, 30]. Shih and Hsu [33] developed a linear time test, which has been referred to as the simplest linear time planarity test by Thomas in his lecture notes [37]. Independently, Boyer and Myrvold discovered a similar algorithm to the PC tree approach [6]. Later, in [34], they implemented the algorithm based on PC trees, which will be referred to as the S&H algorithm. When the given graph is not planar, the algorithm immediately produces explicit Kuratowski subgraphs. Furthermore, the recognition and embedding are done simultaneously in the algorithm.

32.3.1

Preliminaries

To represent a planar embedding, it suﬃces to ﬁnd, for each vertex, the clockwise circular ordering induced by the planar embedding on its incident edges. Given these circular orderings, there are algorithms that can assign spatial coordinates to the nodes. Here, we deal only with the problem of ﬁnding these circular orderings, and refer to them collectively as the embedding of the graph. As the algorithm progresses, more of the embedding becomes known. In particular, S&H comes to know the cyclic order of edges incident to a subset of the vertices. When the cyclic order of a vertex is known, it does not know whether this order should be clockwise or counterclockwise in the embedding, so it uses a C node to represent its cyclic order.

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs A

32-15 B

b

a

b

a

c

c

C g

g

d f

i h

d

e

f

i

e

h

FIGURE 32.10: A cycle replacement consists of selecting a cycle in a graph, adding a new C node whose neighbors ordering gives the ordering of nodes on the cycle, and deleting the edges of the cycle. As we illustrate in parts C and D of Figure 32.11, below, it is applied to a graph that arises partway into the induction step. It’s inverse operation is a C-node replacement. Collectively, the C nodes represent the partial embedding known so far. Let us call such a graph with C nodes a constrained graph. The data structure for implementing the C node is the same as the one given in Deﬁnition 32.1; the algorithm continues to ensure that no two C nodes are adjacent. If T is a depth-ﬁrst spanning tree (DFS tree) of an undirected graph G, all edges of G are tree edges (edges of T ) or back edges (edges between a descendant and an ancestor in T [9]. A vertex is a back vertex if it has an incident back edge from one of its descendants. Since there are n − 1 edges in T , the number of back edges is m − n + 1. We may therefore refer to the number of back edges without reference to any particular DFS tree. A cut set is a set of vertices of a connected graph whose removal from the graph disconnects it. An articulation vertex in a graph is a vertex whose deletion disconnects the graph. A graph is biconnected if it has no articulation vertex [9]. A biconnected component of a graph is a maximal biconnected subgraph. The articulation vertices can be found in linear time [9], so it suﬃces to embed each biconnected component separately, and then connect them by their adjoining articulation vertices. Henceforth, therefore, we may assume that G is biconnected. Given a planar embedding of a constrained graph G, and a cycle C in G that is a cut set, let us say that C’s subembedding is C and everything internal to it in the embedding. A C-node replacement is the following operation (See Figure 32.10): If (y1 , y2 , ..., yk , y1 ) is the cyclic order of neighbors of x, install an edge yi y(i+1)modk for each i from 1 to k, then delete x. This replaces x with the cycle (y1 , y2 , ..., yk , y1 ). A cycle replacement is the inverse of this operation: select a cycle C, and insert a new C node x whose cyclic ordering of neighbors gives the vertices of C in order, and then delete the edges of C.

32.3.2

The Strategy

The algorithm of S&H can be described as a recursive algorithm, Embed. The graph passed to the initial call has no C nodes, but graphs passed to lower calls will have them. A DFS spanning tree is also passed to the call, and since the DFS tree may contain C nodes, it is a PC tree. For now, assume that the initial graph is planar; later, we show how to modify the

© 2005 by Chapman & Hall/CRC

32-16

Handbook of Data Structures and Applications

A

G

C

B

b

a

g

c

l

k

c

g

d

j

e

e

E

d f

e

j f

d e

b

a

x

g

G’

b

g

d

f

D

a

b

a

C

j f

b

a

g

x d e

FIGURE 32.11: The Embed operation. Embed ﬁnds a cycle C and its subembedding A in an unknown planar embedding of G. Embed removes elements of A that are internal to C, contracting resulting vertices of degree 2 on C, and performs a cycle replacement on C, inserting a new C node x. It then performs contractions to eliminate C-node neighbors of x. The result is the graph G . By induction on m − n + 1, a recursive call can be used to ﬁnd an embedding of G . Performing a C-node replacement of x gives a planar embedding where C is a face; inverting the foregoing operations inserts the planar embedding of A inside of it. algorithm so that it returns a Kuratowski subgraph when this is not the case. The input graph to each recursive call is also biconnected. Embed works by induction on the number m − n + 1 of back edges (see Figure 32.11): 1. Choose a cycle C that is a cut set and return its subembedding A in some unknown planar embedding of G (Figure 32.11, part A). 2. Remove elements internal to A to obtain graph G2 , which has a planar embedding where C is a face (Figure 32.11, part B). 3. Contract nodes on C that now have degree 2 to obtain a cycle C (Figure 32.11, part C). 4. Perform a cycle replacement on C to obtain a constrained graph G3 (Figure 32.11, part D). 5. Perform edge contractions between adjacent C nodes in G3 to obtain a a biconnected constrained graph G where no two C nodes are adjacent (Figure 32.11, part E). 6. By induction on the number m−n+1 of back edges, we may call Embed recursively

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-17

on G to obtain a planar embedding of it. 7. On the planar embedding of G , perform the inverses of steps 6, 5, 4 and 3 to obtain a planar embedding of G. The reason for contracting nodes on C of degree two in Step 3 is to ensure that, like G, G is biconnected. Failure to do so would result in pendant nodes, such as node c in Figure 32.10. Because of the way C is selected, the base case will be a biconnected constrained graph G with a vertex n such that G − n is a PC tree. G − n is trivial to embed, and since this embedding has only one face, it is trivial to add n and its incident edges to this embedding to obtain an embedding of G.

32.3.3

Implementing the Recursive Step

Let us name the vertices according to their postorder numbering on a DFS tree T of G. If i is a vertex, we let Ti denote the subtree of T rooted at i. Let us say that a vertex j is earlier than vertex i if j < i. The following are the inputs to Embed. I1: A biconnected constrained graph G. I2: The earliest back vertex i in T ; I3: A DFS tree T of G where all C nodes in the tree are earlier than i. The DFS tree is implemented as in Deﬁnition 32.1, except that the circular lists of edges incident to a C node can include non-tree edges. The parent bits of Deﬁnition 32.1 are required only on tree edges, and are consistent with the rooting of the DFS tree. I4: An ordered list of i and all later vertices, ordered in postorder on the DFS tree. The Terminal Path

Let i be the earliest back vertex, let r be a child of i in the DFS tree whose subtree Tr in the DFS tree has a back edge to i. Since r is earlier than i, Tr is an induced subgraph of the constrained graph G that has no back edges, hence it is a tree. A trivial case occurs when i is the root n of the DFS tree. Since G is biconnected, n is not an articulation vertex, so Tr is unique, and Tr = G − n. Tr is trivial to embed, and since this embedding has only one face, it is also trivial to add n and its incident edges to this embedding. This is the base case referred to in Section 32.3.2. Otherwise, i < n. For ease of presentation, let us imagine, but not explicitly create, an unrooted tree Tr as follows. For each edge (x, j) from a node x of Tr to a node j ≥ i, add an edge (x, jx ) to Tr . Note that this applies to the tree edge (r, i), yielding (r, ir ). The result is a PC tree, but there may be multiple copies of each back vertex j, one for each edge from a node of Tr to j. By analogy to Section 32.2.2, let us consider a leaf jx of Tr to be full if j = i and empty otherwise. Since G is biconnected, every leaf of Tr has a neighbor greater than or equal to i; otherwise, its neighbor in Tr would be an articulation vertex. Therefore, every node of Tr is an internal node in Tr . In addition, since i < n and i is not an articulation vertex, Tr has edges both to i and to proper ancestors of i, so Tr has both empty and full leaves. Finally, since i has an incident tree edge and an incident back edge from Tr , Tr has at least two full leaves. As in Section 32.2.2, let us consider an internal node x to be full if there is a rooting of Tr where x’s subtree only has full leaves, and empty if there exists a rooting where its subtree

© 2005 by Chapman & Hall/CRC

32-18

Handbook of Data Structures and Applications A

i

B

i

D

i

terminal path

C

i

FIGURE 32.12: The induction step of Embed. The cycle C selected by Embed consists of i, the terminal path, and the leftmost and rightmost paths to i from the terminal nodes after full and empty subtrees have been ﬂipped to opposite sides of the terminal path (A). The full nodes and their back edges are trivial to embed inside C, since all of their back edges go to i. The nodes internal to C are to be removed. If they are removed, however, the nodes on the paths from i to the terminal nodes will have degree 2 so they can contracted out of the cycle. The net eﬀect is to remove all full nodes from G, and leave a cycle consisting of i and the terminal path. This is accomplished by splitting the terminal path, as in the consecutive-ones problem, removing the full side of the split, and inserting an edge from i to each terminal node (B). A cycle replacement is performed on this cycle (C), and, as in the consecutive-ones problem, an order-preserving contraction is performed to remove C-node neighbors of of the new C node (D). This yields G ; performing a recursive call on G and inverting the steps from A to D on the resulting embedding gives a planar embedding of G. only has empty leaves. It is a terminal edge if neither of its endpoints is full or empty. If the terminal edges form a path, this is the terminal path. If there are terminal edges but they do not form a path, then Tr has no terminal path. As before, if there are no terminal edges, the terminal path has length 0 and consists of a single node. We give a proof of the following in Section 32.3.5: If the constrained graph G has a planar embedding, it has a terminal path, and nodes on this path can be ﬂipped so that all full subtrees lie on one side and all empty subtrees lie on the other, without violating the cyclic order of any C node.

LEMMA 32.3

This gives a planar embedding of Tr in which all copies of i can be joined without crossing any back edges, as illustrated in Figure 32.12 (A). By the deﬁnition of Tr , there must be a back edge to i, and since G is biconnected, there must be a back edge from Tr to a proper ancestor of i; otherwise i would be an articulation vertex, since we are in an induction step

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-19

where i = n. The full subtrees, the terminal path, and i form an induced subgraph with a bounding cycle in this embedding. This bounding cycle is the cycle C referred to in the overview of the algorithm in Section 32.3.2. As described in the overview, only the cycle, minus its nodes of degree two, is retained for the recursive call (Figure 32.12, part B), and it is replaced by a C node (Figure 32.12, part C). This results in adjacent C nodes whenever there is a C node on the terminal path, which is remedied with an O(1)-time contraction is performed on them, as depicted in Figure 32.9, with a result illustrated in Figure 32.12, part D. A recursive call on the resulting graph provides an embedding of it. Inverting the operations depicted in parts D through B of Figure 32.12 yields a face into which the alreadyknown embedding of the full subtrees can be inserted to yield a planar embedding of the original constrained graph. Finding the Terminal Path

We use the full-partial labeling algorithm of Section 32.2.2 to label the full internal nodes of Tr . This does not require creating Tr explicitly, since Tr and its back edges represent Tr implicitly, and the full-partial labeling algorithm can be run on this representation by considering i to be full and its ancestors to be empty. However, we must confront an annoying detail that we didn’t have in Section 32.2.2, which is that internal nodes can have degree 2. This allows the possibility that an internal node can be both empty and full. This can happen as follows. Let x be a full node, let y be an empty neighbor of degree 2, and let z be y’s other neighbor. Rooting Tr at z gives y a subtree whose leaves are all full, and rooting it at x gives y a subtree whose leaves are all empty. Therefore, y is ambiguous. If it is run without modiﬁcation, the full-partial labeling algorithm of Section 32.2.2 will label ambiguous nodes as full. However, we can detect the ﬁrst time it labels an ambiguous node y. In this case, x is a full neighbor that has just notiﬁed y that it is full. If x has degree 2, then it is also ambiguous, contradicting our choice of y. If it has degree 1, it is the only full leaf, contradicting the fact that Tr has at least two full leaves. Therefore, x has degree greater than two, and full leaves can be reached from y only by going through x. This situation is easily detected: when it is time for x to notify y that it has become full, x is the only node that has been labeled full but not yet notiﬁed its non-full neighbor, and y has degree 2. In this case, we halt the full-partial labeling algorithm early, and select x to be the only node in a terminal path of length 0. Aside from this detail, the full-label algorithm is the same as in Section 32.2.2. By the analysis of Lemma 32.1, the running time is proportional to the number of terminal edges plus the number of full nodes if the conditions of Lemma 32.3 are met. If they are not met, the graph can be rejected. However, in this case, we still want to know the terminal edges since we will use them to produce a Kuratowski subgraph. The algorithm for ﬁnding them is easily implemented to run in time proportional to the size of G in this case, as it requires ﬁnding only the subtree of edges that lie on paths between partial nodes. They can be labeled by rooting the tree at one of the partial nodes and working upward from the other partial nodes. The Linear Time Bound

The analysis of the complexity of the full-partial algorithm of Section 32.2.2 made use of the fact that there are no nodes of degree two. We have not ensured that this is true of Tr . The main problem that this causes is that the number of full nodes is not asymptotically

© 2005 by Chapman & Hall/CRC

32-20

Handbook of Data Structures and Applications

bounded by the number of full leaves, so we can no longer claim that the running time of the full-partial labeling algorithm is bounded by the number of full leaves. Instead, S&H makes use of the observation that all full nodes are deleted from the recursive call. We may therefore use a potential function that charges the costs of the full-partial labeling algorithm to nodes and edges that are removed from the recursive call, at O(1) cost per node or edge. The potential function is similar to the one for the consecutive-ones property, except that ui denotes the number of nodes and edges of the graph: φ(M, i) = 2ui + |Ci | + (deg(x) − 1) x∈Pi

We show that the value of the potential function for the recursive call drops by an amount proportional to the set of operations performed outside of the recursive call, such as running the full-partial labeling algorithm. The analysis of the cost of the O(p) operations is unaﬀected. Since the full nodes are deleted, the Ω(k) drop in the potential function pays for the remaining O(k) operations. The remaining operations of ﬁnding the terminal path are analyzed as in the consecutive-ones problem. Finding and splitting the terminal path is performed just as it is in the consecutive-ones problem. By Lemmas 32.1 and 32.2, this takes time proportional to the number k of full nodes plus the length p of the terminal path, and covers the cost of removing the nodes internal to C illustrated in Figure 32.12 (B). We must now analyze the cost of meeting the preconditions I1-I4 in each recursive call. I1 through I4 can easily be met in O(n + m) time for the initial call, where all nodes are P nodes, using standard techniques from [9]. Given I1 - I4 for G, we describe how to modify them so that they can be met in the recursive call on G . LEMMA 32.4 A rooted spanning tree of an undirected graph is a DFS tree if and only if all non-tree edges are back edges.

The necessity of this condition is common knowledge [9]. For the suﬃciency, observe that if T is a rooted spanning tree such that every non-tree edge is a back edge, then ordering the adjacency lists so that tree edges appear ﬁrst and calling DFS at the root of T will force it to adhere to T as the DFS tree. For Input I4, let T be the DFS tree passed to the recursive call. Since all diﬀerences between T and T occur in subtree Ti , the postorder of elements later than i in T is also the same as in T . The input is met by searching forward in the preorder list for the next back vertex, and discarding the traversed elements from the front of the list. For Input I3, let us make the new C node x inserted inside C be a child of i, hence a parent of its other neighbors in the DFS tree that is passed to the recursive calls. This requires us to label the parent-bit labels of edges incident to the new C node before contractions, as in Figure 32.12 (C). We have already bounded the cost of touching these edges, so this does not aﬀect the asymptotic running time. Any remaining C nodes that are removed by O(1)-time contractions, as in Figure 32.12 (D) have the contracted edge as their parent edge, so the new node becomes the parent of their empty subtrees, without requiring any further relabeling of parent bits. Since all back edges in T go from descendants to ancestors, it is easy to see that this is also true of T . T is a depth-ﬁrst spanning tree of G , by Lemma 32.4, so the conditions of

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-21

I3 are satisﬁed by T . For Input I1, Step 3 of the description of Section 32.3.2 ensures that every node on the cycle has an incident edge to an empty node in Tr . Therefore, the remaining graph is biconnected, since for every node in Tr , there are two paths to a proper ancestor of i: one of them by traveling upward on tree edges, and one of them by traveling downward through an empty tree and then to the ancestor on a back edge. For Input I2, if i ceases to be a back vertex in G , then vertices are examined in ascending order in the list I4, starting at i until the next back vertex, i , is encountered. Since these searches are monotonically increasing, the total costs of them over all recursive calls is linear.

32.3.4

Diﬀerences between the Original PQ-Tree and the New PC-Tree Approaches

Whenever a biconnected subgraph is created, the algorithm uses a subset of vertices in its bounding cycle as representatives to be used for future embedding. The embedding of each biconnected component is temporarily stored so that, at base case, when the graph is declared planar, a ﬁnal embedding can be constructed by tracing back and pasting the internal embedding of each biconnected component inside its bounding cycle. The way S&H adopted PC trees in their planarity test is entirely diﬀerent from that of B&L’s application of PQ trees in Lempel, Even and Cederbaum’s planarity test [24]. B&L used PQ trees to test the consecutive ones property of all nodes adjacent to the incoming node in their vertex addition algorithm. The leaves of their PQ trees are exactly those nodes adjacent to the incoming node. Internal nodes of the PQ trees are not the original nodes of the graph. They are there only to keep track of feasible permutations, whereas in S&H’s approach, a P node is also a vertex of the original graph H, a C node denotes a biconnected subgraph, and nodes adjacent to the new node can be scattered anywhere, both as internal nodes and as leaves in the PC tree. Thus, S&H’s PC tree faithfully represents a partial planar embedding of the given graph and is a more natural representation. Another diﬀerence is that in order to apply PQ trees in Lempel, Even, and Cederbaum’s approach, there is a preprocessing step of computing the “s-t numbering” besides the depth-ﬁrst search tree. This step could create a problem when one tries to apply PQ trees to ﬁnd maximal planar subgraphs of an arbitrary graph [13]. Other aspects of handling the PC tree are adapted from B&L’s approach, such as the handling of of Q nodes (or C nodes) during execution of the full-partial labeling algorithm.

32.3.5

Returning a Kuratowski Subgraph when G is Non-Planar

In this section, let H denote the unconstrained graph that is passed into the initial call, let G denote the constrained graph that is passed into a lower recursive call, and let G denote the constrained graph that is passed into the next recursive call down from G. The graph H passed in at the highest-level call has no C nodes. In any recursive call on a constrained graph G, all P nodes are vertices of H. Therefore, all neighbors of a C node are vertices of H. A unique cycle C of H that has the following properties can be constructed from a C node x of G. Let (x1 , x2 , ..., xk ) be the cyclic order of x’s neighbors. Then (x1 , x2 , ..., xk ) appear in that order on C, and the remaining nodes of C were contracted in higher-level recursive calls by applications of Step 3 of Section 32.3.2.

LEMMA 32.5

© 2005 by Chapman & Hall/CRC

32-22

Handbook of Data Structures and Applications

FIGURE 32.13: A C node x of G represents a cycle in H, so a path of G through x represents two possible paths in H. Before proving this, let us examine what it implies about the relationship paths G and paths in H. A path in G through a C node x corresponds to two possible paths in H, one that proceeds in one direction about the cycle represented by x and one that proceeds in the other direction (Figure 32.13). We give the construction of the lemma by induction on the depth of a call. The initial call is the base case, where there are no C nodes and the claim is vacuously true. For the induction step, let x be the new C node created in the step, and let C be the separating cycle bounding the full nodes of G that is found in the step. Note that, as in Figure 32.12, C may itself contain C nodes. Let y be such a C node on C, and let a, b be its neighbors on C. By induction, the lemma applies to y, so y represents a cycle Cy of H. The portion (a, y, b) of C represents two possible paths in H: one, P1 , that travels one way around Cy avoiding empty neighbors of y in G (other than possibly a or b), and another, P2 , that travels the other way, avoiding full neighbors of y in G (other than possibly a or b). When constructing the cycle Cx in H represented by x, splice in P2 in place of (a, y, b). This ensures that the neighbors of x in G will be on Cx in H. After application of the contraction step 3, some additional nodes of the cycle bounding the full subtrees are contracted out before they have a chance to become neighbors of the new C node, but these are those that the lemma allows to be removed. Therefore, the induction hypothesis to apply x and Cx . Proof

The constructive proof of the lemma shows how the cycle represented by a C node can be found in H, by undoing the contractions while returning up through the recursive calls to H. We now show how to return a subdivision of a K3,3 or a K5 when the conditions of Lemma 32.3 are not met. Suppose ﬁrst that the terminal edges of Tr do not form a path. Recall that a terminal edge is deﬁned to be an edge whose removal from Tr separates it into two subtrees that each have both full and empty nodes. Clearly, the terminal edges are connected, so they form a subtree of Tr with at least three leaves, z1 , z2 , and z3 . Let w be the meeting point of the paths of terminal edges that connect them, as illustrated in Figure 32.14. For zk ∈ {z1 , z2 , z3 }, there is a path of non-terminal edges through full nodes, ending at a copy

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

z3

32-23

z2 w z1

FIGURE 32.14: When the terminal edges of Tr do not form a path, they form a subtree of TC with at least three leaves, z1 , z2 , and z3 , each of which is adjacent to a full subtree that has a copy of i and an empty subtree that has a copy of a proper ancestor of i. Let w be the node of the tree from which paths to z1 , z2 , and z3 branch. of i, and a disjoint path of non-terminal edges through empty nodes, ending at a copy of a proper ancestor tk of i. Collectively, these paths correspond to paths in G that are disjoint, except at their endpoints. (The multiple copies of i are identiﬁed in G, and {t1 , t2 , t3 } are not necessarily distinct.) There exists t ∈ {t1 , t2 , t3 } of median height. The paths from z1 , z2 , and z3 to t1 , t2 , and t3 can be extended via edges of the DFS tree to paths to t that are disjoint except at t (Figure 32.15). These paths and the terminal edges joining them to w deﬁne a subdivision of a K3,3 of G with bipartition {{z1 , z2 , z3 }, {w, i, t}}. If w is a P node, this K3,3 of G expands to to a subdivision of K3,3 in H by Lemma 32.5. If w is a C node, but at least one of z1 , z2 , and z3 fails to be a neighbor of w, then we can reduce this case to the previous one by taking into account that w represents a cycle in H by Lemma 32.5, and ﬁnding a P-node neighbor w of w to serve in place of w, as illustrated in Figure 32.16. (Since no two C nodes are adjacent, w is a P node.) Suppose w is a C node and each of z1 , z2 , and z3 is a neighbor of w. Without loss of generality, suppose t2 is a minimal element of the not-necessarily distinct elements t1 , t2 , and t3 . If t2 = t1 or t2 = t3 , then S&H returns a K5 ; otherwise, the algorithm returns a K3,3 , as illustrated in Figure 32.17. Finally, let us consider the case when there are at most two terminal nodes, but it is not possible to ﬂip the full subtrees to one side of the terminal path and the empty trees to the other, due to constraints imposed some C node x that lies on the terminal path. For each neighbor y of x, let Ty be the neighboring subtree reachable from x through y. That is, it is the component of the PC tree that contains y when x is deleted, and, conceptually, its “leaves” are the leaves of this subtree if it is then rooted at y. If y lies on the terminal path, at least one of Ty ’s leaves is a copy of i and at least one is a copy of a proper ancestor of y. Otherwise, all of its leaves are copies of i or all are copies of proper ancestors, depending on whether Ty is full or empty. The cyclic order of neighbors of x blocks ﬂipping the full and empty subtrees to opposite sides of the terminal path iﬀ x has four neighbors a, b, c, d whose cyclic order about x is (a, b, c, d), and and where Ta and Tc each contain a full leaf and Tb and Td each contain an empty leaf. (A neighbor on the terminal path can be selected for either of these two categories.) Suppose that this is the case. In Tr , there are disjoint paths from a and c through Ta and Tc to copies of i and from b and d through Tb and Td to copies of proper ancestors tb , td of i. These all correspond to paths of G that are disjoint except at their endpoints. If tb = td , let t = tb = td . Otherwise, let t be the lower of the two. The path to the other of the two can be extended by DFS tree edges to t that is still disjoint from the other paths, except

© 2005 by Chapman & Hall/CRC

32-24

Handbook of Data Structures and Applications

B t1 t 2= t

t

t3

z1 z2 z3

i

w

A z2

z3

i

w z1 z3

z2 w z1

FIGURE 32.15: If w is a P node, S&H gets a K3,3 with bipartition {{z1 , z2 , z3 }, {w, i, t}}. This K3,3 is the contraction of a K3,3 of the original input graph H.

In G:

z3

C

w’

z2

w z1

z3 z1

w’

z2

z3 z1

w’

z2

FIGURE 32.16: If w is a C node but at least one of z1 , z2 , and z3 is a non-neighbor of w, the case can be reduced to that of Figure 32.15 by selecting a neighbor w to serve in the role of w. at t. These paths, the cycle represented by x, and the DFS tree edges between t and i give rise to a K3,3 of H by Lemma 32.5, as in Figure 32.18. In addition to giving an algorithm for returning a subdivision of a K3,3 or a K5 when the embedding algorithm fails, we have just proven Lemma 32.3, since no planar graph contains such a subdivision.

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-25

B

A

z3

z2

z3 z 2 z1

w z1

C

D

z3 t2

t2

i

i

t

i

t

z2

z1

z3

t2

z2 t2

i

z1

z3 z 2 z1

z3 z 2 z1

FIGURE 32.17: Each of z1 , z2 and z3 is a neighbor of w, which is a C node. Without loss of generality, suppose t2 is a minimal element of t1 , t2 , and t3 . If one of the others, say, t3 , is equal to t2 , then the algorithm returns a K5 . Otherwise, it returns a K3,3 .

In G:

t

t

i

i

a

b

a

b

c

d

c

i

b

d

t

a

c

x d

FIGURE 32.18: If a C node x has four neighbors (a, b, c, d) in that order, such that there are disjoint paths from a and c to i and b and d to an ancestor of i, then the cycle that x represents, together with these paths, gives a K3,3 .

© 2005 by Chapman & Hall/CRC

32-26

32.4

Handbook of Data Structures and Applications

Acknowledgment

We would like to thank the National Science Council for their generous support under Grant NSC 91-2213-E-001-011.

References [1] K. Appel and W. Haken. Every planar map is four colorable. part i. discharging. Illinois J. Math., 21:429–490, 1977. [2] K. Appel and W. Haken. Every planar map is four colorable. part ii. reducibility. Illinois J. Math., 21:491–567, 1977. [3] S. Benzer. On the topology of the genetic ﬁne structure. Proc. Nat. Acad. Sci. U.S.A., 45:1607–1620, 1959. [4] K. S. Booth. PQ-Tree Algorithms. PhD thesis, Department of Computer Science, U.C. Berkeley, 1975. [5] S. Booth and S. Lueker. Testing for the consecutive ones property, interval graphs, and graph planarity using PQ-tree algorithms. J. Comput. Syst. Sci., 13:335–379, 1976. [6] J. Boyer and W. Myrvold. Stop minding your P’s and Q’s: A simpliﬁed o(n) embedding algorithm. Proceedings of the Tenth Annual ACM-SIAM Symposium on Discrete Algorithms, 10:140–149, 1999. [7] J. Cai, X. Han, and R. E. Tarjan. An o(mlogn)-time algorithm for the maximal planar subgraph problem. SIAM J. Comput., 22:1142–1162, 1993. [8] N. Chiba, T. Nishizeki, S. Abe, and T. Ozawa. A linear algorithm for embedding planar graphs using pq-trees. J. Comput. Syst. Sci., 30:54–76, 1985. [9] T. H. Cormen, C. E. Leiserson, R. L. Rivest, and C. Stein. Introduction to Algorithms. McGraw Hill, Boston, 2001. [10] D. R. Fulkerson and O. Gross. Incidence matrices and interval graphs. Paciﬁc J. Math., 15:835–855, 1965. [11] M. Habib, R. M. McConnell, C. Paul, and L. Viennot. Lex-bfs and partition reﬁnement, with applications to transitive orientation, interval graph recognition and consecutive ones testing. Theoretical Computer Science, 234:59–84, 2000. [12] F. Harary. Graph Theory. Addison-Wesley, Reading, Massachusetts, 1969. [13] J. E. Hopcroft and R. E. Tarjan. Eﬃcient planarity testing. J. Assoc. Comput. Mach., 21:549–568, 1974. [14] W. L. Hsu. PC-trees vs. PQ-trees. Lecture Notes in Computer Science, 2108:207–217, 2001. [15] W. L. Hsu. A simple test for the consecutive ones property. Journal of Algorithms, 42:1–16, 2002. [16] W. L. Hsu and T. Ma. Fast and simple algorithms for recognizing chordal comparability graphs and interval graphs. SIAM J. Comput., 28:1004–1020, 1999. [17] W. L. Hsu and R. M. McConnell. PC trees and circular-ones arrangements. Theoretical Computer Science, 296:59–74, 2003. [18] P. N. Klein and J. H. Reif. An eﬃcient parallel algorithm for planarity. Journal of Computer and System Science, 18:190–246, 1988. [19] N. Korte and R. H. Moehring. An incremental linear-time algorithm for recognizing interval graphs. SIAM J. Comput., pages 68–81, 1989. [20] D. Kratsch, R. M. McConnell, K. Mehlhorn, and J. P. Spinrad. Certifying algorithms for recognizing interval graphs and permutation graphs. Proceedings of the Fourteenth Annual ACM-SIAM Symposium on Discrete Algorithms, pages 866–875, 2003.

© 2005 by Chapman & Hall/CRC

PQ Trees, PC Trees, and Planar Graphs

32-27

[21] C. Kuratowski. Sur le probl`eme des courbes gauches en topologie. Fundamata Mathematicae, pages 271–283, 1930. [22] C. Lekkerker and D. Boland. Representation of ﬁnite graphs by a set of intervals on the real line. Fund. Math., 51:45–64, 1962. [23] W. F. Lu and W.-L. Hsu. A test for interval graphs on noisy data. Lecture Notes in Computer Science, 2467:196-208, 2003. [24] A. Lempel, S. Even, and I. Cederbaum. An algorithm for planarity testing of graphs. In P. Rosenstiehl, editor, Theory of Graphs, pages 215–232. Gordon and Breach, New York, 1967. [25] R. M. McConnell. A certifying algorithm for the consecutive-ones property. Pro-

[26]

[27] [28] [29] [30] [31] [32] [33]

[34] [35] [36]

[37] [38] [39]

ceedings of the 15th Annual ACM-SIAM Symposium on Discrete Algorithms (SODA04), 15:761–770, 2004. R. M. McConnell and J. P. Spinrad. Linear-time modular decomposition and eﬃcient transitive orientation of comparability graphs. Proceedings of the Fifth Annual ACMSIAM Symposium on Discrete Algorithms, 5:536–545, 1994. R. M. McConnell and J. P. Spinrad. Linear-time transitive orientation. Proceedings of the Eighth Annual ACM-SIAM Symposium on Discrete Algorithms, 8:19–25, 1997. R. M. McConnell and J. P. Spinrad. Modular decomposition and transitive orientation. Discrete Mathematics, 201(1-3):189–241, 1999. R. M. McConnell. Linear-time recognition of circular-arc graphs. Algorithmica, 37:93– 147, 2003. K. Mehlhorn. Graph algorithms and NP-completeness. Data structures and algorithms, 2:93–122, 1984. K. Mehlhorn and P. Mutzel. On the embedding phase of the hopcroft and tarjan planarity testing algorithm. Algorithmica, 16:233–242, 1996. D. Rose, R. E. Tarjan, and G. S. Lueker. Algorithmic aspects of vertex elimination on graphs. SIAM J. Comput., 5:266–283, 1976. W. K. Shih and W.-L. Hsu. A simple test for planar graphs. Proceedings of the International Workshop on Discrete Math. and Algorithms, University of Hong Kong, pages 110–122, 1993. W. K. Shih and W. L. Hsu. A new planarity test. Theoretical Computer Science, 223:179–191, 1999. J. Small. A uniﬁed approach to testing, embedding and drawing planar graphs. Proc. ALCOM International Workshop on Graph Drawing, Sevre, France, 1993. H. Stamm-Wilbrandt. A simple linear-time algorithm for embedding maximal planar graphs. Proc. ALCOM International Workshop on Graph Drawing, Sevre, France., 1993. R. Thomas. Planarity in linear time – lecture notes, georgia institute of technology. Available at www.math.gatech.edu/∼thomas/, 1997. A. Tucker. An eﬃcient test for circular-arc graphs. SIAM Journal on Computing, 9:1–24, 1980. M. S. Waterman. Introduction to Computational Biology: Maps, Sequences and Genomes. Chapman and Hall, New York, 1995.

© 2005 by Chapman & Hall/CRC

33 Data Structures for Sets 33.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33-1

Models of Computation

33.2

Simple Randomized Set Representations . . . . . . .

33-3

The Hash Trie • Some Remarks on Unique Representations

33.3 33.4

Equality Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-6 Extremal Sets and Subset Testing . . . . . . . . . . . . . . . 33-10 Static Extremal Sets and Subset Testing

33.5

•

Dynamic Set Intersections

The Disjoint Set Union-Find Problem . . . . . . . . . . 33-14 The Classical Union-Find Problem and Variants

Rajeev Raman University of Leicester

33.1

33.6 33.7

Partition Maintenance Algorithms . . . . . . . . . . . . . . . 33-17 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-19

Introduction

Sets are a fundamental concept in computer science: the study of algorithms and data structures for maintaining them were among the earliest developments in data structures. Our focus will be on problems that involve maintaining a family F of sets, where all sets are drawn from a universe U of elements. We do not assume that there is a particular natural order among the elements of U , and in particular do not focus on data structuring problems on sets where the operations explicitly assume such an order (e.g. priority queues). A base repertoire of actions is as follows: ⎫ create() Create a new empty set, add it to F and return the name of the ⎪ ⎪ ⎪ ⎪ set. ⎬ destroy(A) If A = ∅ then remove A from F. If A = ∅, ﬂag an error. ⎪ ⎪ ⎪ insert(x, A) Set A ← A ∪ {x}. ⎪ ⎭ delete(x, A) Set A ← A − {x}. (33.1) The following operation is fundamental for data structuring problems involving sets in general, but plays only an auxiliary role in this chapter: member(x, A)

Returns ‘true’ if x ∈ A and ‘false’ otherwise.

(33.2)

If we take only insert, delete and member, we get the dictionary problem, covered in Part III. The base repertoire plus member is essentially no more diﬃcult, as it represents the problem of maintaining a collection of independent dictionaries over a common universe. In this chapter, we focus on adding operations to this base repertoire that take two or more sets

33-1

© 2005 by Chapman & Hall/CRC

33-2

Handbook of Data Structures and Applications

as arguments. For example, we could consider the standard set-theoretic operations on two sets A and B: A op B, op ∈ {∪, ∩, −}. A data structure may support only an enumerative form of these operations, whereby the result of A op B is, in essence, some kind of enumeration of the set A op B. This result may not be in the same representation as A or B, and so one may not be able operate on it (e.g. ((A op B) op C) may not involve just two executions of op). The complexity of the algorithms will generally be measured in terms of the following parameters: n = A∈F |A| (the total size of all sets in the family) m = |U | (the size of the universe) (33.3) k = |F | (the number of sets in the family)

33.1.1

Models of Computation

The problems that we consider in this chapter have been studied on a variety of diﬀerent computation models. The primary models for proving upper bounds are the pointer machine model and the random-access machine (RAM) model. The pointer machine [22, 35, 40] postulates a storage consisting of an unbounded collection of registers (or records) connected by pointers. Each register can contain an arbitrary amount of additional information, and no arithmetic is allowed to compute the address of a register. The processor has a constant number of (data and pointer) registers that it can manipulate directly, but all other temporary results must be held in the storage records. In particular, this means that to answer a query, the processor must either start from a pointer p into the data structure provided by the ‘user’ or from one of the constant number of pointers it itself holds, and explore the data structure by following pointers starting from p. The RAM model we use is a standard variant of the original RAM model [1], the word RAM model [17]. Brieﬂy, the wordRAM model uses the unit-cost criterion, and a word ∗ size of Θ(log n) bits, where n = Clearly the word size should be at least S∈F |S|. log n + O(1) bits—otherwise one could not even address the amount of memory required to store F . Nevertheless, there are instances where the solutions that result from the use of this model could be viewed as “cheating”. For example, we could have n = 2Θ(|U |) , in which case the word size would be Θ(|U |) bits, which would allow most set operations to be done in O(1) time by bitwise operations on a single word. The solutions that we discuss, however, do not exploit this fact. In the related cell probe model, the storage of the computer is modeled by cells numbered 0, 1, 2, . . ., each of which can store a number of O(log n) bits. The running time of an algorithm in this model is measured as just the number of words (cells) accessed during an operation. All other computations are free. The arithmetic model, used primarily for proving lower bounds, was proposed by Fredman [14] and Yao [43]. We now give a somewhat simpliﬁed description of this model which conveys the essential aspects: the interested reader is referred to [25, section 7.2.3] for further details. In many cases of interest, it is useful to assume that the data structure operates on values from a set M, which is a monoid. This means that M = (M, +, 0) is augmented with an associative and commutative operator + such that M is closed under + and 0 is the identity element for +. The data structure is modeled as an collection of

∗ To some readers, the idea that the wordsize of a machine can change as we update the data structure may appear a little strange, but it is merely a formal device to ensure reasonable usage.

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-3

variables v0 , v1 , . . ., each of which can hold a value from M and initially contains 0. After receiving the input to each operation, the algorithm executes a sequence of operations of the form vi ← INPUT, vi ← vj + vk or OUTPUT ← vi . The algorithm must be correct for all choices of M, thus in particular it cannot assume that the operator + is invertible. The cost of an algorithm in processing a sequence of operations is the total number of such instructions executed by it. The restriction that M is a monoid (rather than say, a group) is partly for ease of proving lower bounds. However, known algorithms in this framework do not gain signiﬁcant asymptotic speedups by exploiting stronger models (e.g. by using the fact that + is invertible in groups).

33.2

Simple Randomized Set Representations

In this section we cover a simple, but general-purpose set representation due to [33, 34]. In addition to the base repertoire (33.1), we wish to support: A op B, op ∈ {∪, ∩, −}, as well as the following boolean operations: equal(A, B) subset(A, B)

Returns ‘true’ if A = B and ‘false’ otherwise. Returns ‘true’ if A ⊆ B and ‘false’ otherwise.

(33.4) (33.5)

This representation touches upon a topic of interest in its own right, that of the unique representation of sets, which can be deﬁned as follows. We consider a class of representations that suﬃce to represent all subsets of a given universe U . However, we require that each set should have a a unique representation within that class. In particular the representation should be independent of the sequence of operations that created the set (for example, a red-black tree representation is not unique). Unique representations have the desirable property that it is then possible to ensure that all instances of the same set within a family (including sets that are created as intermediate results in a computation) are represented by the same object within the data structure. This allows constant-time equality tests of two sets: just check if they are the same object! The diﬃculty, of course, is to combine unique representations with rapid updates. This deﬁnition also applies to randomized algorithms, which may access a source of random bits while executing a query or update, and the uniqueness requirement here means that the choice of representation for a set depends solely upon the sequence of random bits that are output by the source. (If, as in practice, one uses a pseudo-random generator, then the representation for a given set depends only upon the seed used by the pseudo-random number generator.)

33.2.1

The Hash Trie

We ﬁrst weaken the notion of a unique representation, and speak about the unique representation of sets from a labeled universe. Here, we assume that the elements of the universe U are labeled with (not necessarily unique) b-bit strings, and for x ∈ U we denote its label by (x). In addition, we also have the notion of a labeled set Ay , where y is a sequence of ≤ b bits. Any labeled set Ay satisﬁes the property that for all x ∈ Ay , y is a preﬁx of (x). Given a set from a labeled universe, one can of course use the well-known binary trie [21] to represent it. For the sake of precision we now deﬁne the binary trie, when used to represent a (labeled) set Sy :

© 2005 by Chapman & Hall/CRC

33-4

Handbook of Data Structures and Applications

• if |Sy | = 0 then the trie is empty. • if |y| = b then the trie is a leaf node that contains a pointer to a linked list containing all elements of Sy . • otherwise, the trie comprises an internal node with an edge labeled 0 pointing to a binary trie for the set Sy0 = {x ∈ Sy | y0 is a preﬁx of (x)} and an edge labeled 1 pointing to a binary trie for the labeled set Sy1 = {x ∈ Sy | y1 is a preﬁx of (x)} A set S ⊆ U is represented as the labeled set SΛ , where Λ denotes the empty string. Consider a family F of sets from a universe U and let each node in the resulting collection of tries represent a labeled set in the natural way. Then if two nodes represent labeled sets Az and Bz , such that Az = Bz (note that the label is the same) then the subtrees rooted at these nodes have an identical structure. One can then save space by ensuring that all sets in F whose representations have instances of the set Az point to a single instance of Az . By consistently applying this principle, we will ensure that two sets S, T , S = T point to a single instance of SΛ . We now give an example. Let U = {a, b, c, d, e, f } and F contain the sets X = {a, c, f }, Y = {c, d, e} and Z = {a, b, c, f }. Suppose that the elements of U are labeled as follows: (a) = 001, (b) = 011, (c) = 010, (d) = 101, (e) = 110, (f ) = 010 Without exploiting the unique representation property, we would get the representation in Figure 33.1(i), and by exploiting it and storing subtrees uniquely it we get the representation in Figure 33.1(ii). Updates now need to be done with a little care: one cannot, for example, add a new child to a node, as the subtree in which the node lies may be shared among a number of sets. The solution is to use nondestructive updates, namely, implementing updates by making a copy of the path from the leaf to be added/deleted to the name of the sets (cf. persistent data structures). Figure 33.1(iii) shows the state of the data structure after executing the commands insert(a, Y ) and insert(b, X), which we now explain. First, let us consider the operation insert(a, Y ). We need to insert a as a sibling of c in the trie for Y . Since the path from c up to the root of Y could potentially be shared by other sets, we do not modify the node that is the parent of c, instead making a copy of the entire path from c to the node that is the root of the representation of Y , as shown in the ﬁgure. The pointer for Y is then appropriately modiﬁed. The nodes that were previously part of the representation of Y (shown in dotted outline) are, in this example, not reachable as part of any set and may be cleared as part of a garbage-collection phase (they are not explicitly freed during the insertion). Now coming to insert(b, X), we proceed as before, and do not insert b directly as a sibling of (c, f ) under X. However, before creating a new node with the leaves b and (c, f ) as children, we check the data structure to see if such a node exists and ﬁnd one (this is the node representing the set Z01 ). Therefore, we avoid creating this node. Continuing, we discover that all the nodes that we would have tried to create as part of this insertion already exist and therefore conclude that the sets X and Z are now the same (and hence their tries should be represented by the same node). To support the reuse of existing nodes, a dictionary data structure that stores all nodes currently in the data structure is maintained. A node x with left child y and right child z is stored in this dictionary with the key y, z (either of y or z could be nil). Each insertion requires Θ(b) lookups or insertions into this dictionary. Avoiding this overhead is

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-5 X

Y

Z

(i)

a

c, f

c

d

X

e

a

c, f

b

Y

Z

(ii)

a

c, f

c

d

e

b

X

Y

Z

(iii)

a

c, f

c

a

d

e

b

FIGURE 33.1: Unique set representations. important, but in a randomized setting the dictionary can be implemented using dynamic perfect hashing, giving O(1) overhead. This idea is also used in practical implementations of functional programming languages such as LISP, and is referred to as hashed consing in that context† . In a randomized setting, the other problem, that of obtaining suitable labels, can also be solved easily. We simply let be a function chosen at random from a universal class of hash functions (cf. Chapter 9). By choosing : U → {1, . . . , n3 }(for example) we can ensure that the number of collisions, or pairs of distinct elements x, y in U with (x) = (y) is O(1) with a probability that tends to 1 as n → ∞. This means that we can essentially ignore the possibility that there are more than a constant number of elements at the leaf of any trie. Clearly, labels are O(log n) bits long. Note that we can ensure that both the lengths of the labels and the number of collisions stays under control as n changes, by simply rehashing whenever the value of n doubles or halves since the last rehash. We now analyze some parameters of this data structure. Clearly, equality testing takes O(1) time. Each insertion or deletion takes time and space proportional to the depth of the tries, which is O(log n). Both insertions and deletions may cause some nodes to become ‘garbage’ (i.e. unreachable from any set)—these need to be compacted periodically, for example, when a rehash occurs. It is easy to verify that the amortized cost of rehashing and garbage collection is negligible. This gives parts (i) and (ii) of the following theorem; for part (iii) we refer the reader to [33, Chapter 8]:

† The

operation for creating a new node is called a Cons.

© 2005 by Chapman & Hall/CRC

33-6

Handbook of Data Structures and Applications

THEOREM 33.1

There is a data structure for a family of sets that:

(i) supports insert and delete in O(log n) amortized expected time and equality-testing in O(1) worst-case time; (ii) uses O(n log n) space, and (iii) given two sets A and B, supports the constructive version of A op B for op ∈ {∪, ∩, −, ⊆} in O(|S2 |(1 + log(S3 /S2 ) amortized expected time, where S2 and S3 are the middle and largest sets of A − B, B − A and A ∩ B. REMARK 33.1 Note that a fairly naive bound for an operation A op B, for op ∈ {∩, ∪, −, ⊆} is O(|A| log |B|), implemented by storing each tree in the family in a binarytree based dictionary. Thus, Theorem 33.1 is not, in the worst case, a lot better. On the other hand, if we have two large sets S and T that diﬀer in only a constant number k of elements then the expected running time of the above algorithm is O(k log max{|S|, |T |}).

33.2.2

Some Remarks on Unique Representations

There are interesting issues regarding the unique representation problem, in particular for unlabeled universes. We ﬁrst mention here that both the randomized search tree and the skip list (cf. Chapter 13) satisfy the unique representation described above, even for unlabeled universes, and support the dictionary operations (insert, delete and member) in O(log n) expected time. In each of these cases, the algorithm described there should be modiﬁed so that instead of choosing a random height for a node in a skip list, or a random priority for a node in a randomized search tree, we should choose a function U → [0, 1] that behaves ‘randomly’ (we refer the reader to [36] for a precise theoretical statement). By representing each set in a family using either one of these representations we get alternatives to parts (i) and (ii) for Theorem 33.1. However, one may ask about deterministic unique representations that support rapid updates. The reader is directed to [3, 38] and the references therein for pointers to the literature on this fascinating area. We only note here that [3] show a Θ(n1/3 ) time bound for supporting the above dictionary operations, provided that the class of representations is restricted to “graph-like” representations (including, of course, trees). This shows an exponential separation between randomized uniquely represented dictionaries and deterministic (non-unique) dictionaries on the other hand, and deterministic uniquely represented dictionaries on the other. This result is not entirely conclusive, however: by labeling elements in U with integers from {0, . . . , m − 1}, as observed in [38, Section 2.3], the above trie-based approach gives uniquely represented dictionaries that support all operations in O(log m) time, where m = |U |. Thus, there is a “dichotomy” depending upon whether we are interested in bounds that depend on m alone or n alone (cf. Chapter 39). It is not known how the complexity of unique representation depends on the relationship between m and n. Indeed, the gap in knowledge is quite large, as the Ω(n1/3 ) applies when n ∼ log∗ |U |, while the O(log m) algorithm is optimal only when n ∼ |U | for some constant > 0.

33.3

Equality Testing

We now consider representations that only support the base repertoire (33.1) and the equal operation (33.4). Clearly we would like solutions that are better (at least in some respects) than those given by Theorem 33.1, and we begin by considering deterministic data structures. We ﬁrst discuss one due to [38], which is based on binary tries (cf. Section 33.2).

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-7

The operations applied to our data structure are divided into epochs. At the start of an epoch the data structure is rebuilt ‘from scratch’. Without loss of generality we can consider U to consist of all the elements that were present in F at the start of an epoch, plus all the elements that have appeared as the argument to an insert or delete operation since then (note that U may contain elements no longer present in F ). We can then label elements in U with values from {0, . . . , |U | − 1}, using log m-bit integers, where m = |U |. Whenever we insert an element that is not in U , we give it the next higher integer. If A∈F |A| = n0 at the start of an epoch, we start the next epoch after n0 /2 updates (inserts or deletes). Rebuilding from scratch involves resetting U to be only those elements that are currently present in F , relabeling all elements with integers from {0, . . . , |U | − 1}, and recreating the data structure with these labels, as well as any auxiliary data structures. It will be easy to see that the amortized cost of rebuilding is negligible, and that |U | = O(n) at all times. Each set is represented as a binary trie, with shared subtrees as in the previous section. Updates are also done non-destructively. A key diﬀerence is the method used to avoid creating nodes that already exist. Nodes are numbered serially in order of creation. If node p points to node v, we say that p is one of (possibly many) parents of v. Each node v, maintains a set parents(v) of all its parents. Each parent p ∈ parents(v) is assigned a key equal to node-number(w), b , where w is the other node (besides v) pointed to by p, and b equals 0 or 1 depending on whether v is a left child of p or not. When doing an update, before creating a new node with left child x and right child y, we we search set parents(x) for the key node-number(y), 0). If such a key is found, we return the matching parent, which is precisely a node with left child x and right child y. Otherwise, create a new node p with pointers to v and w, set parents(p) to empty, insert p into parents(v) and parents(w), and return p. The issue is how to represent the sets parents(v) (cf. the dictionary in the previous section). Each set parents(v) is represented by a binary search tree and a variation of the splay algorithm is used to perform searches. The splay algorithm is especially appropriate as it can be used to exploit patterns in the sequence of accesses. Although a detailed consideration of splay trees is beyond the scope of this chapter, the necessary facts are, roughly, that (a) insertion of a key that is larger than the maximum key currently in the tree (a passive insertion) has constant amortized cost while an insertion that is not passive (an active) insertion) has logarithmic amortized cost (b) if the frequency of search for an item i is 0 < αi < 1 then the amortized cost of all searches for item i is essentially O(1 + log(1/αi )). This is summarized in the lemma below: Consider a sequence of insertions and searches performed on an (initially empty) binary search tree using splays. Let:

LEMMA 33.1

si

=

the number of searches of item i

s a

= =

the total number of searches, the number of active insertions, and

p

=

the number of passive insertions.

The cost of this sequence is O((p + a) + s + a log a +

si ≥1 si

log(s/si )).

REMARK 33.2 Insertions into an initially non-empty tree are easily handled: pretend to start with an empty tree and initialize the tree with a sequence of passive insertions. By the above lemma, the additional cost is linear in the size of the initial tree.

© 2005 by Chapman & Hall/CRC

33-8

Handbook of Data Structures and Applications

We now argue that although an update (insert or delete) may result in Θ(log m) node creations, and hence as many insertions into the parents dictionaries, most of the insertions are passive. Speciﬁcally, let xy, z denote the creation of a node x with children y and z. Then, an update may result in a sequence of node creations: y1 x0 , x1 , y2 y1 , x2 , . . . , yl yl−1 , xl , where y1 , . . . , yl are ‘new’ nodes and x0 , . . . , xl are nodes that existed previously in the data structure. Note that because the yi ’s are new nodes, they have higher node-numbers than the xi s. As a result, of the 2l insertions into parents dictionaries caused by this update, all but two—the insertion of yi with key node-number(x0 ), b (node-number(x1 ), 1 − b ) into parents(x1 ) (parents(x0 ))—are passive. We now need to bound the time to perform searches on the parents dictionary. For this, we consider a single epoch, and let G = (V, E) be directed acyclic graph formed by the nodes at the end of the epoch. The sources (nodes of zero in degree) are the roots of (current and past) sets and the sinks (nodes of zero outdegree) are the elements of U . Note that all nodes have outdegree at most 2. An update to sets in F results searches in the the parents dictionary of nodes that lie along a path π from a source to a sink in G. It should be noted that the path is traversed in reverse, from a sink to a source. Note that each time that a search traverses an edge (v, w), where w is a parent of v, the key that is searched for in parents(v) is the same. Thus we can identify the traversal of an edge in G with a search of a particular key in a particular dictionary. Let ae denote the number of times an edge e ∈ E is traversed, and note that we can delete from G all edges with ae = 0. Letting Av = (w,v)∈E a(w,v) , the cost of searches in parents(v) for any vertex v ∈ V , denoted cost(v), is given by (w,v)∈E a(w,v) log Av /aw,v , by Lemma 33.1. Let V denote the set of nodes that are neither sinks nor sources, and note that for any v ∈ V , (w,v)∈E a(w,v) = (v,w)∈E a(v,w) . Thus, we have:

cost(v)

=

v∈V

a(w,v) log Av /aw,v

(w,v)∈E

=

a(w,v) log Av +

v∈V (w,v)∈E

=

a(v,w) log Av +

v∈V

v∈V −V (w,v)∈E

a(v,w) log Av /a(v,w) +

v∈V (v,w)∈E

≤

a(w,v) log Av +

v∈V −V (w,v)∈E

v∈V (v,w)∈E

≤

log out(v) +

ae log 1/ae

e∈E

a(w,v) log Av +

ae log 1/ae

e∈E

a(w,v) log Av

v∈V −V (w,v)∈E

a(w,v) log Av

v∈V −V (w,v)∈E

where out (v) denotes the out-degree of v. The last step uses the fact that for all α1 , . . . , αd , d αi ∈ [0, 1] and i αi = 1, i=1 αi log(1/αi ) ≤ log d (the ‘entropy’ inequality). Note that v∈V −V (w,v)∈E a(w,v) is just the number of updates in this epoch and is therefore Θ(n). Since Av = O(n) we can bound the latter term by O(n log n). Since the outdegree of each node is 2, the former term is O(V ), which is also O(n log n). We thus ﬁnd that all dictionary operations in the sets parents(v) take O(n log n) time, and so the amortized cost of an update is O(log n). To conclude: There is a data structure for a family of sets that supports insert, delete and member in O(log n) amortized time, equal in O(1) worst-case time, and uses O(n log n) words of space, where n is the current size of the family of sets.

THEOREM 33.2

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-9

We now describe the partition tree data structure for this problem [24, 44]. Since the partition tree is closely related to the above data structure, results based on the partition tree are not signiﬁcantly diﬀerent from those of Theorem 33.2. We describe a slightly simpliﬁed version of the partition tree by assuming that U is ﬁxed. The partition tree is a full binary tree T with |U | leaves, i.e. a tree where the leaves are all at depth | log U | or | log U |, and all nodes have either two or zero children. At the leaves of this tree we place the elements of U (in any order). For each internal node v of T , we let D(v) denote the elements of U that are at leaves descended from v. A set A ∈ F is stored at an internal node v if D(v) ∩ A = ∅. Furthermore, all sets that are stored at an internal node v are grouped into equivalence classes, where the equivalence relation is given by A ≡ B ⇔ (A ∪ D(v) = B ∪ D(v)). Clearly, two sets are equal iﬀ they belong to the same equivalence class at the root of the tree and so this representation supports constant-time equality testing. Note that if nv is the number of sets stored at an internal node v of T , then v nv = O(n log |U |). This is because each set containing x appears once on each node from the path leading from x to the root (and hence O(log |U |) times in all), and x∈U |{A ∈ F | x ∈ A}| = n. The key issue, of course, is how to update the partition tree when executing insert(x, A) (delete(x, A)). We traverse T from x to the root, storing (or removing) A from all the nodes along the path. We now show how to maintain the equivalence classes at these nodes. At the leaf, there is only one equivalence class, consisting of all sets that contain x. We merely need to add (delete) A to (from) this equivalence class. In general, however, at each node we need to determine whether adding/deleting x to/from A causes A to move into a new equivalence class of its own or into an existing equivalence class. This can be done as follows. Suppose γ is a (non-empty) equivalence class at a (non-leaf) node u in T and suppose that v, w are u’s children. A little thought shows that must be (non-empty) equivalence classes α, β at v, w respectively such that γ = α ∩ β. A global dictionary stores the name of γ with the key α, β . Inductively assume that following an operation insert(x, A) (or delete(x, A)) we have updated the equivalence class of A at all ancestors of x up to and including a node v, and suppose that A is in the equivalence class α at v. Next we determine the equivalence class β of A in v’s sibling (this would not have changed by the update). We then look up up the dictionary with the key α, β ; if we ﬁnd an equivalence class γ stored with this key then A belongs to γ in v’s parent u, otherwise we create a new equivalence class in u and update the dictionary. Lam and Lee [24] asked whether a solution could be found that performed all operations in good single-operation worst-case time. The main obstacles to achieving this are the amortization in the splay tree and the periodic rebuilding of the partition tree. Again dividing the operation sequence into epochs, Lam and Lee noted that at the end of an epoch, the partition tree could be copied and rebuilt incrementally whilst allowing the old partition tree to continue to answer queries for a while (this is an implementation of the global rebuilding approach of Overmars [26]). By ‘naming’ the equivalence classes using integers from an appropriate range, they note that the dictionary may be implemented using a twodimensional array of size O(n2 log n) words, which supports dictionary operations in O(1) worst-case time. Alternatively, using standard balanced binary trees or Willard’s q-fast tries [42], or the more√complex data structure of Beame and Fich [5] gives a worst-case complexity of O(log n), O( log n) and O((log log n)2 ) for the dictionary lookup, respectively. Using these data structures for the dictionary we get: There is a data structure for a family of sets that supports equal in O(1) worst-case time, and insert and delete in either (i) O(log n(log log n)2 ) worst-case time

THEOREM 33.3

© 2005 by Chapman & Hall/CRC

33-10

Handbook of Data Structures and Applications (i)

A

C

a

D

B

b

d

c

A, C B D

(ii)

A, C B

A, B

A,C,D B

B

A,C,D

A, B C, D

FIGURE 33.2: The partition tree (ii) and its relation to the DAG created by the binary trie representation with shared subtrees. and O(n log n) space or (ii) O(log n) worst-case time and O(n2 log n) space. The reader may have noticed the similarities between the lookups in partition trees and the lookup needed to avoid creating existing nodes in the solutions of Theorems 33.1 and 33.2; indeed the examples in Figure 33.2 should make it clear that, at least in the case that |U | is a power of 2, there is a mapping from nodes in the DAG of Theorem 33.2 and partitions in the partition tree. The ﬁgure illustrates the following example: U = {a, b, c, d}, F = {A, B, C, D}, A = {a, c, d} = C, B = {a, b, d}, D = {c, d}, and an assumed labeling function that labels a, b, c and d with 00, 01, 10 and 11 respectively. The partitions in (ii) shown circled with a dashed/dotted line correspond to the nodes circled with a dashed/dotted line in (i). REMARK 33.3

33.4

Extremal Sets and Subset Testing

This section deals with testing sets in F for the subset containment relationship. We ﬁrst survey a static version of this problem, and then consider a dynamisation.

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33.4.1

33-11

Static Extremal Sets

Here we assume that we are given a family F of sets from a common universe as input. A set S is maximal in F if there is no set T ∈ F such that S ⊂ T . A set S is minimal in F if there is no set T ∈ F such that S ⊃ T . The extremal sets problem is that of ﬁnding all the maximal (or all the minimal) sets in F. A closely related problem is the computation of the complete subset graph, which represents all edges in the partial order induced among members of F by the subset relation. Speciﬁcally, the complete subset graph is a directed graph whose vertices are the members of F and there is an edge from x to y iﬀ x ⊂ y. This is a problem that arises in a number of practical contexts, for example, it can be used to maximally simplify formulae in restricted conjunctive normal form [29]. This problem has been considered in a number of papers including [29–32, 46]. We now summarize the results in these papers. As before, we let k = |F | denote the size of the family, and n = S∈F |S| be the total cardinality of all sets. A number of straightforward approaches can be found with a worst-case complexity of O(n2 ). It can be shown that the subset graph has Ω(n2 /(log n)2 ) edges [46], which gives a lower bound for any algorithm that explicitly lists the complete subset graph. An aim, therefore, is to bridge the gap between these bounds; all results below are in the word RAM model. Yellin and Jutla gave an algorithm that computes the subset graph using O(n2 / log n) dictionary operations. Using hashing, all dictionary operations take O(1) expected time, and we get an O(n2 / log n) expected running time. Using Willard’s q-fast tries [42],√or the more complex data structure of Beame and Fich [5] gives running times of O(n2 / log n) or O((n log log n)2 / log n) respectively. Pritchard [30] gave a simple algorithm that ran in O(n2 / log n) time. In [31] he re-analyzed an earlier algorithm [29] to show that this algorithm, too, ran in O(n2 / log n) time (the algorithm of [29, 31] uses RAM operations less extensively and is a good candidate for porting to the pointer machine model). Finally, Pritchard [32] gave an algorithm that uses the bit-parallelism of the word RAM extensively to achieve an O(n log log n/(log n)2 ) running time. All of the above are static problems—it is very natural to ask about the complexity of this problem when updates may change the sets in F . Again, if one wishes explicitly to maintain the entire subset graph, it is easy to see that Ω(n) edges may change as the result of a single update. Take U = {1, . . . , u} and F = {A, B2 , . . . , Bu }, where A = U and Bi = {1, i} for i = 2, . . . , u. The sum of the sizes of the sets in F is 2u − 2, but deleting the element 1 from A removes all u − 1 edges from the complete subset graph. It is not very hard to come up with algorithms that can achieve an O(n) running time (see e.g. [46]). To obtain a better complexity, therefore, we must consider algorithms that do not explicitly store this graph. One way of doing this is to consider the dynamic subset testing problem, deﬁned as the problem of supporting the base repertoire (33.1) and the subset operation (33.5). Since the query subset(A, B) tests if there is an edge between A and B in the complete subset graph, this problem seems to be an appropriate dynamisation of the extremal sets problem, and it is dealt with in the next section.

33.4.2

Dynamic Set Intersections and Subset Testing

Rather than consider the dynamic subset testing problem directly, we consider a related problem, the dynamic set intersection problem. In addition to the base repertoire (33.1) of actions above, we consider an enumerative version of the following: intersect(A, B)

© 2005 by Chapman & Hall/CRC

Report the intersection of sets A and B.

(33.6)

33-12

Handbook of Data Structures and Applications

Other variations could include returning the size of the intersection, or retrieving some values associated with the elements in the intersection. A unifying way to study these problems is as follows: we are given a set M of information items that will be associated with elements of U , a function I : U → M that associates values from M with keys in U . We assume that M = (M, +, 0) is a monoid. The query intersect(A, B) then returns x∈A∩B I(x), where the sum is taken with respect to +. It is easy to cast the intersection problem and its variants in this framework. The basic problem deﬁned above can be obtained by letting M = (2U , ∪, {}) and I(x) = {x} for all x, and the problem where one merely has to report the size of the intersection can be obtained by setting M = (IN, +, 0) and I(x) = 1 for all x, where + here is normal (arithmetic) addition. Note that dynamic subset testing, deﬁned in the previous section, easily reduces to the intersection problem: A ⊆ B iﬀ |A| = |A ∩ B|. (n)) = We now survey the results in this area. It is useful to use the notation O(f c ∞ ∪c=0 O(f (n) log n), which ignores polylogarithmic factors are ignored (a similar convention is used for the Ω notation, with inverse polylogarithmic factors being ignored). For this problem, Yellin [45] gave an algorithm that processed a sequence of n insertions · n1/k + qn(1−1/k) ) time for any ﬁxed and deletions and q intersect operations in time O(n k. The intuition behind this result is as follows. Take t = n1−1/k and say that a set S ∈ F is large if |S| ≥ t and small otherwise. All sets are represented as dictionaries (allowing membership testing in logarithmic time). Intersections between two small sets, or between a small set and a large one, are handled by testing each element of one set for membership in the other. Clearly this takes O(t) time, and insertion into and deletion from a small set takes O(1) time. For every pair of large sets S, T , the algorithm keeps track of I(S ∩ T ) explicitly, by storing the elements of S ∩ T in a balanced binary search tree, and storing at any internal node x the monoid sums of all the elements under x. ‡ Since there are at most n/t = n1/k large sets, an insertion into, or a deletion from, a large set requires updating 1/k ) time. This at most n1/k of the pairwise intersections with other sets, and takes O(n proves the time bound, modulo some details such as dealing with changes in the value of t caused by changes in n and so on. Dietz et al. [11] noticed that if one were to process a sequence of n updates and q queries, where n and q are known in advance, then the overall cost of Yellin’s algorithm for √ processing the sequence is minimized by taking n1/k = min{n, q}, giving an overall time + n√q). They gave an algorithm that achieves this bound even when n and bound of O(q q are not known in advance. We now show that this bound is essentially tight in the arithmetic model, by giving a + n√q). For simplicity, consider the problem where the elements in the lower bound of Ω(q intersection are to be reported, i.e., take M = (2U , ∪, {}) and I(x) = {x}. Starting from an empty family F , we build it up by insertions so that the (sums of) sizes of the pairwise intersections of sets in F are large, and query all possible intersections of the sets. If the answers to all the queries were to be obtained by adding (unioning) together singleton sets, then the lower bound would follow. Unfortunately, this is too simplistic: subsets obtained as temporary values during the computation of one answer may be re-used to answer another query. To get around this, we note that a subset that is used to compute the answer to several intersection queries must lie in the common intersection of all the sets involved,

‡ If the monoid is M = (2U , ∪, {}), we do not store the monoid sum explicitly, but instead take the monoid sum at an internal node to be implicitly represented by the subtree rooted at it.

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-13

and construct F so that the common intersection of any of a suﬃciently large (yet small) number of sets in F is small. This means that no large subset can be reused very often. We assume that q ≤ n2 (otherwise the lower bound is trivial). Starting with an empty family, we perform a sequence of n = Θ(N ) insert operations and q queries. We choose √ √ U = {1, . . . , 2N/ q} and k = |F | = q; we let m = |U | and let = c log N for some suﬃciently large constant c > 0. We assume the existence of a family F = {S1 , . . . , Sk } with the following properties: (a) |Si ∩ Sj | = Ω(m) for all i, j with 1 ≤ i < j ≤ k. (b) for any pairwise distinct indices i1 , . . . , i , | ∩j=1 Sij | < . The existence of such a family is easily shown by a probabilistic argument (a collection of random sets of the appropriate size suﬃces). We now represent F in the data structure by executing the appropriate insertions. Note that this requires at most km = N = Θ(n) update operations,since |Si | ≤ m for all i. We then query the pairwise intersections of all the sets; there are k2 = Θ(q) queries in all. Firstly, note that the sizes of all the output sets sum to Ω(mk 2 ) by (a) above. The output to each query is conceptually obtained by a binary union tree in which each internal node combines the answers from its children; the external nodes represent singleton sets. Each node can be labeled with a set in the obvious way. Consider the entire forest; we wish to count the number of distinct nodes in the forest (that is, nodes labeled with distinct sets). Since each distinct set corresponds to at least one instruction that is not counted elsewhere, counting the number of distinct sets is a lower bound on the number of instructions executed. We consider only nodes that correspond to sets of size or larger. Clearly, the number of such sets is Ω(mk 2 /). Furthermore, no such set can be used to answer more than 2 √q) distinct sets, giving diﬀerent queries by (b). It follows that there are Ω(mk 2 /3 ) = Ω(n us a lower bound of this magnitude (as mentioned above, a lower bound of Ω(q) is trivial √q)). whenever q = Ω(n Dietz et al. also considered the relatively high memory usage of the above algorithms. For example, if q = Θ(n) then both Yellin’s algorithm and Dietz et al.’s algorithm use Ω(n3/2 ) space. Dietz et al. also considered the complexity of the above problem when the algorithms were restricted to use s memory locations, where n ≤ s ≤ n2 , and gave an 1/3 algorithm that processed n operations (queries and updates) in O(n/s ) time. Both the upper bound and the lower bound are more complex than those for the unlimited-memory case. We summarize with the main theorems of Dietz et al.: For the problem of maintaining a family of sets under create, insert, delete and intersect, we have the following results:

THEOREM 33.4

+ n√q) time to process a sequence of n updates and (i) Any algorithm requires Ω(q q queries in the arithmetic model of computation. √q + (ii) Any intermixed sequence of n updates and q queries can be processed in O(n √ q) time using O(min{n q, n2 }) space. 2 s−1/3 ) oper(iii) There is a sequence of O(n) updates and queries that requires Ω(n ations in the arithmetic model, if the algorithm is restricted to using s memory locations. 2 /s1/3 ) (iv) Any intermixed sequence of O(n) updates and queries can be performed in O(n time and O(s) space.

© 2005 by Chapman & Hall/CRC

33-14

Handbook of Data Structures and Applications

As mentioned above, the arithmetic model is a relatively weak one (making it easy to prove lower bounds), but all the algorithms that realise the upper bounds ﬁt into this model. It would be interesting to prove similar lower bounds for stronger models or to design algorithms that improve upon the performance of the above in stronger models. Note also, that the lower bounds are for the intersection problem, not the problem that we originally considered, that of subset testing. Since we get back a boolean answer from a subset testing query, it does not ﬁt into the arithmetic framework.

33.5

The Disjoint Set Union-Find Problem

In this section we cover the best-studied set problem: the disjoint set union-ﬁnd problem. The study of this problem and its variants has generated dozens of papers; indeed, it would not be unreasonable to devote an entire chapter to this problem alone. Fortunately, much of the work on this problem took place from the 1960s through to the early 1990’s, and this work is surveyed in an excellent article by Galil and Italiano [18]. In this section, we summarise the main results prior to 1991 but focus on developments since then. We begin with by formulating the problem in a recent, more general way [19], that ﬁts better in our framework. We start with the base repertoire, but now require that insert(x, A) is only permitted if x ∈ B, for all sets B ∈ F − {A}. This ensures that all sets in F are pairwise disjoint. We now add the following operations: dunion(A, B, C) This sets C ← A ∪ B, but destroys (removes from F ) A and B. ﬁnd(x) For any x ∈ ∪A∈F A, returns the name of the set that x is in. This problem has a number of applications, beginning historically with the eﬃcient implementation of EQUIVALENCE and COMMON statements in early FORTRAN compilers in the 1960s, and continues to ﬁnd applications in diverse areas such as dynamic graph algorithms, meldable data structures and implementations of uniﬁcation algorithms. It is diﬃcult to discuss the disjoint-set union-ﬁnd problem without reference to Ackermann’s function, which is deﬁned for integers i, n ≥ 0 as follows: ⎧ for i = 0, n ≥ 0 ⎨ 2n 1 for i ≥ 1, n = 0 A(i, n) = ⎩ A(i − 1, A(i, n − 1)) for i, n ≥ 1 For a ﬁxed i, the row inverse of Ackermann’s function, denoted by a(i, n), is deﬁned as: a(i, n) = min{j | A(i, j) ≥ n}. It can be veriﬁed that a(1, n) = Θ(log n) and a(2, n) = Θ(log∗ n), where log∗ n is the iterated logarithm function. The functional inverse of Ackermann’s function is deﬁned for m, n ≥ 1 by: α(m, n) = min{i ≥ 1 | A(i, 4m/n) ≥ n}

2 ··

·

65, 536 times Since A(3, 4) = 22 , for all practical purposes, α(m, n) ≤ 3 whenever m, n ≥ 1. Indeed, if m grows suﬃciently faster than n (e.g. m = Ω(n log∗ n)) then α(m, n) is indeed a constant. The union-ﬁnd problem in the above formalisation was studied by [20], who gave the following results:

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-15

THEOREM 33.5

(i) An intermixed sequence of f ﬁnd, m insert, m create, d ≤ m delete operations and at most m − 1 dunion operations takes O(m + (f + d)α(f + m, m)) time. The size of the data structure at any time during the sequence is proportional to the number of live items in it. (ii) For any parameter k > 1, an intermixed sequence of ﬁnd, dunion, insert, create, and delete operations can be processed in the following worst-case time bounds: ﬁnd and delete in O(log m/ log k) time, create and insert in O(1) time and dunion in O(k) time, where m is the current number of elements in the data structure. In fact, [20] showed that this problem could be reduced to the classical union-ﬁnd problem (see below). This reduction is such that the time bounds for ﬁnd and dunion change only by a constant factor, but the time to delete an element x is the same as the time it takes to ﬁnd the set containing x plus the time it takes to unite a singleton set with this set. The results follow by applying this result, respectively, to the classical union-ﬁnd data structures given in Theorem 33.6(i) and Theorem 33.6(ii) (in fact they use a variant of the latter result due to Smid [37]). An interesting variant of the above problem was considered by the same authors in [19]. They replaced the ﬁnd operation with the seemingly simpler: bﬁnd(x, A) Return ‘true’ if x ∈ A and ‘false’ otherwise. This ‘boolean’ union-ﬁnd problem was motivated by the problem of implementing meldable priority queues. Kaplan et al. showed that the lower bounds established for the classical union-ﬁnd problem apply to this problem as well (see Theorem 33.7).

33.5.1

The Classical Union-Find Problem and Variants

In the classical version of this problem, we have U = {1, . . . , m} and F initially equals {{1}, {2}, . . . , {m}}; we assume that the name of the set {i} is simply i. The operation dunion is modiﬁed as follows: dunion(A, B) This sets A ← A ∪ B, but destroys (removes from F ) B. The operation ﬁnd(x) operates as described above. We now mention the main upper bounds that are known for the classical version of the problem: THEOREM 33.6

A sequence of m − 1 dunion and f ﬁnd operations can be processed as

follows: (i) in O(m + f α(f + m, m)) time; (ii) for any parameter k > 1, each ﬁnd takes O(log m/(log k + log log m)) worst-case time and each dunion takes O(k) worst-case time; (iii) the i-th ﬁnd operation takes O(α(i, m)) worst-case time, and the entire sequence takes O(m + f α(f + m, m)) time; (iv) for any parameter k > 0, the entire sequence takes O(ma(k, m) + kf ) time; (v) for any parameter k > 1, dunion takes O(k) worst-case time, ﬁnd takes tq = O(log m/ log k) worst-case time, and the entire sequence takes time O((m + f )(α(m + f, m) + a(tq , m)) time.

© 2005 by Chapman & Hall/CRC

33-16

Handbook of Data Structures and Applications

We begin by remarking that the bounds (i) and (ii) are in fact implied by Theorem 33.5, but are included here for completeness (see [18] for a more complete history). The upper bound of Theorem 33.5(i) is due to Tarjan [39] (with many interesting reﬁnements due to [41]). Note that since α(f + m, m) is essentially constant, the running time is linear for all practical purposes. In (i), each dunion takes O(1) worst-case time, but a single ﬁnd may take Ω(log m) time. Result (iii) allows us to process each ﬁnd quickly, in essentially constant time, but an individual dunion could be quite slow and may in fact take Ω(m) time. The overall cost of the sequence remains as in (i), though. This was explicitly proved in [27], but the main ideas were already present in [16]. In (iv), the time for a dunion is traded oﬀ for ﬁnd, and the overall running time remains essentially linear (at least for k ≥ 2) [6]. In either (i) or (iii), although the overall cost of the operation sequence is very low, an individual operation could take Ω(log m) or Ω(m) time respectively. If we wish to minimise √ the maximum cost of a single operation over the sequence, then choosing (say) k = Θ( log m) in (ii), we get that no operation takes more than O(log m/ log log m) time. However, the cost of the entire sequence increases to Ω(f log m/ log log m). This result is due to [8]. In [2], the authors ask the question whether one can combine the best features of the results (i) (or (iii)) and (ii). Except possibly for a few extreme cases, this is achieved in [2, Theorem 11]. The result presented there has some technical restrictions (e.g. the algorithm needs to know the value of m in advance), but the authors claim that these are not essential. We now come to lower bounds for this problem, which are either proved in the pointer machine model or the cell probe model. In general the cell probe model is more powerful (since there are no restrictions on the way that memory is accessed), but the lower bounds are proven assuming that all memory locations can store only numbers of O(log m) bits. By contrast, the pointer machine model does not place any restrictions on the size of the numbers that can be stored at each node. In the pointer machine model, however, the algorithm is required to maintain the name of each set in distinct nodes, and an operation such as ﬁnd(x) must traverse the graph of nodes from the node for x to the node that contains the name of the set that x is in. Lower bounds for the pointer machine model sometimes make the following separability assumption [40]: At any time during the computation, the contents of the memory can be partitioned into collections of records such that each collection corresponds to a currently existing set, and no record in one collection contains a pointer to a record in another collection. We now give some of the known lower bounds: THEOREM 33.7

(i) Any algorithm that processes a sequence of m − 1 dunion and f ﬁnd operations must take Ω(m + f α(f + m, m)) steps on either the pointer machine model or the cell probe model with a word size of O(log m) bits. (ii) Any algorithm that processes a sequence of m − 1 dunion and f ﬁnd operations must take Ω(log m/ log log m) steps for some operation, on either the separable pointer machine model or the cell probe model with a word size of O(log m) bits. The lower bound (i) for the pointer machine model is due to [28]; this generalizes an earlier lower bound for separable pointer machine algorithms due to [40] (see also the result

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-17

due to [4]). The lower bound (ii) is due to [8], while both cell probe lower bounds are due to [15]. Additional lower bounds may be found in [2]. We refer the reader to [18] for variations of the classical union-ﬁnd problem, including union-ﬁnd with backtracking and persistent union-ﬁnd (for the latter, see also [12, 13]). Another important variant, which has a similar complexity to that of the union-ﬁnd problem, is the split-ﬁnd problem. Here we are given an ordered universe U and start with F containing a single set which contains all of U . We perform an intermixed series of operations S, T ← split(S, x) for some x ∈ S, which removes from S all elements > x and places them in a new set T , and ﬁnd(x), which as before returns the name of the set containing x. Upper and lower bounds of the form given in Theorem 33.6(i) or 33.7(i) have been proven by [16, 27, 28]. Finally, we mention the very interesting Union-copy problem studied in [23]. In addition to the classical union-ﬁnd operations, they support an additional operation copy, which takes one set as its argument, and adds an exact copy of it to F . Although it is obviously no longer true that all sets in F are disjoint, they require that two sets that are to be united must be disjoint. In addition, they want the data structure to support dual operations, in the sense that the roles of sets and elements are reversed. For example, the operation element-union(x, y) takes two elements x and y that do not both belong to any set in F , and turns them into a single element that is member of all the sets to which x or y previously belonged. Duals of copy and ﬁnd are also supported. They show applications of this data structure to the (geometric) dynamic segment tree data structure.

33.6

Partition Maintenance Algorithms

A partition P of a given universe U = {1, 2, . . . , m} is a collection of #P disjoint subsets (parts), P (1) , P (2) , . . . , P (#P ) , of U such that ∪i Pi = U . A case of special interest is that of bipartitions, which is a partition with two parts. A partition P is an equivalence relation on U , which we denote as ≡P . Given two partitions P and Q, the induced partition of P and Q is the partition that represents the equivalence relation x ≡ y ⇔ ((x ≡P y) ∨ (x ≡Q y)) (in words, two elements belong to the same part of the induced partition iﬀ they belong to the same part in both P and Q). The problem we consider is the following. Given a collection F of partitions (initially empty), to support the following operations: report(F ) insert(P ) delete(P )

Report the partition induced by the members of F. Add partition P to F . Remove partition P from F .

⎫ ⎬ ⎭

(33.7)

We assume here that each new partition P is given by an array A[1..m] containing integers from 0 to #P − 1. Other operations include asking if two elements belong to the same partition of the global induced partition, reporting the set of elements that belong to the same part of the global induced partition, or, for any two elements, reporting the number of partitions in which these two elements are in diﬀerent parts. As noted by Bender et al. [7] and Calinescu [9], this problem has a number of applications. The general issue is supporting a classiﬁcation system that attempts to categorize objects based on a number of tests, where each test realizes a partition of the objects (a bipartition, for instance, could model the outcome of a boolean test). The above data structure would be useful in the pre-processing phase of such a classiﬁcation system, where, for example, an algorithm may repeatedly insert and delete partitions (tests) until it ﬁnds a small set of tests that distinguish all items of the universe. Examples in optical character recognition (OCR) and VLSI are given by the above authors.

© 2005 by Chapman & Hall/CRC

33-18

Handbook of Data Structures and Applications

We now discuss some solutions to these problems. The model used is the word RAM model with word size Θ(log n), where we take k = |F | and n = km. We ﬁrst consider the case of general partitions, and then that of bipartitions. A simple data structure for general partitions was given by Bender et al. [7], and resembles the partition tree of Section 33.3. A key fact they use is (apply radix sorting on triples of the form P [i], Q[i], i ): Given two partitions P and Q of U = {1, . . . , m} we can calculate the induced partition of P and Q in O(m) time.

PROPOSITION 33.1

This immediately implies that we can maintain the induced partition of F under inserts alone in O(m) time and also support report in O(m) time—we simply maintain the global induced partition and update it with each insert. deletes are not so easy, however. We place the partitions at the leaves of a full binary tree with k leaves. At each internal node v of this binary tree we store the partition induced by all the partitions descended from v. Clearly, the root contains the global induced partition. Inserting a partition P involves replacing a leaf containing a partition Q by an internal node that has P and Q as children, and updating the partitions stored at this internal node and all its ancestors. Deleting a partition involves deleting the appropriate leaf, and maintaining fullness by possibly swapping a ‘rightmost’ leaf with the deleted leaf. In either case, we update partitions from at most two leaves up to the root. This gives a data structure that supports insert and delete in O(m log k) time and report in O(m) time. The space used is O(mn) words of memory. The time for insert can be improved to amortised O(m), while leaving the time complexity of all other operations the same. The idea is to group all partitions into disjoint groups of t = log k each, leaving perhaps one incomplete group of size smaller than t. For each group we store its induced partition, and also store the induced partitions of all groups, except the incomplete group, at the leaves of a tree T (which may now have O(k/ log k) leaves) as before. In addition, we explicitly store the global induced partition G. When performing insert(P ) we add P to the incomplete group and in O(m) time, update the global partition G. If the incomplete group reaches size t, in addition, we calculate the group’s induced partition in O(mt) = O(m log k) time and insert this induced partition into T , also taking O(m log k) time, and start a new empty incomplete group. Deleting a partition P is done as follows. We delete P from its group. If P is in the incomplete group we recompute the G in O(mt) time. If P ’s group is stored in T , we recompute the new partition induced by P ’s group in O(mt) time and update T in O(m log k) time (if P is the last remaining partition in its group we delete the corresponding leaf, as before). We then recompute G in O(mt) = O(m log k) time as well. Note that the amortised cost of an insertion is now O(m), since we spend O(m log k) time every log k insertions. Finally, Bender et al. note that a signature-based scheme gives a Monte-Carlo method that performs all operations in O(m) time, but has a small chance of outputting an incorrect result (the algorithm runs correctly with probability 1 − O(m−c ) on all inputs). We now consider the important special case of bi-partitions, and give a sketch of Calinescu’s [9] algorithm for solving this problem in optimal amortised time. Again letting k = |F |, one can associate a k-bit binary string σx with each x ∈ U = {1, . . . , m}, which speciﬁes in which part of each of the k partitions x lies. Let π denote a permutation such that σπ−1 (i) ≤ σπ−1 (i+1) , for i = 1, . . . , m − 1; i.e., π represents a sorted order on the (multiset) of strings {σx | x ∈ U }. Furthermore, let lcpi denote the most signiﬁcant position where σπ−1 (i) and σπ−1 (i+1) diﬀer, for i = 1, . . . , m − 1 (lcpi = k + 1 if σπ−1 (i) = σπ−1 (i+1) ). We can now clearly support report in O(m) time, as elements in the same part of the global

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-19

induced partition will be consecutive in sorted order, and the lcp values allow us to determine the boundaries of parts of the global induced partition without inspecting the strings. An insert of a partition is also easily supported, as only local re-arrangements of elements lying within the same part of the previous global induced partition are required. Deleting a partition is a little harder, and requires a few observations. Suppose that we delete the partition that gives the t-th most signiﬁcant bit of σ1 , . . . , σm . Suppose that for two indices i, j, j > i, lcpi < t and lcpj < t, but all lcp’s in between are at least t. Then we can conclude that the strings in positions 1 to i − 1 of the sorted order continue to appear in (possibly a diﬀerent order in) positions 1 to i − 1 after the deletion of this partition, and likewise the strings in positions j + 1 to m also do not ‘move’ except internally. Let Σ denote the strings that appear in positions i through j in sorted order, i.e., Σ = {σl | l ∈ {π −1 (i), π −1 (i + 1), . . . , π −1 (j)}}. We now show how to sort Σ, and repeated application of this procedure suﬃces to re-sort the array. Note that all the strings in Σ that have 0 in the t-th position maintain their relative order after the deletion, and likewise those strings with 1 in the t-th position. Thus, re-sorting Σ is simply a matter of merging these two sets of strings. At a high level, the merging procedure proceeds like the (standard, trivial) algorithm. However, a naive approach would require Θ(k) time per comparison, which is excessive. Instead, we note that at each step of the merging, the next candidate can either be determined in O(1) time (when the relative order of the two candidates is implicit from the lcp data) or a number, c, of comparisons need to be made. However, if c comparisons are made, then there is at least one lcp value in the new array that is c more than its counterpart in the old array. Since lcp values are bounded by O(k), no string will be involved in more than O(k) comparisons during its lifetime, and the cost of these comparisons can be charged to the insertions of the partitions. This intuition can be formalized by a potential function argument to show that the amortised cost of a deletion is indeed O(n), thus giving an optimal (amortised) algorithm for this problem.

33.7

Conclusions

We have presented a number of algorithms and data structures for supporting (largely) basic set-theoretic operations. Aside from the union-ﬁnd problem, which has been extensively studied, relatively little research has been done into these problems. For instance, even the most basic problem, that of ﬁnding a general-purpose data structure that supports basic set operations, is not yet satisfactorily solved. The problem becomes more acute if one is concerned about the space usage of the data structures—for example, it is not known whether one can solve set equality testing eﬃciently in linear space. Due to the proliferation of unstructured data, set operations are increasingly important. For instance, many search engines return a set of documents that match a given boolean keyword query by means of set operations on the sets of documents that contain each of the keywords in the query. The characteristics of this kind of application also suggest directions for research. For example, given the large data-sets that could be involved, it is a little surprising that work on external-memory algorithms for these problems is somewhat limited. Another issue is that these sets usually have patterns (e.g. the number of sets that contain a given keyword may satisfy a power law; certain sets of keywords may be more likely to be queried together etc.), which should be exploited by eﬃcient algorithms. With the latter motivation in mind, Demaine et al. [10] have considered the adaptive complexity of these problems. They assume that they are given a collection of sorted lists that comprise the sets, and need to compute unions, intersections and diﬀerences of these sets. If one is only interested in worst-case complexity (across all instances) then this

© 2005 by Chapman & Hall/CRC

33-20

Handbook of Data Structures and Applications

problem is uninteresting (it essentially boils down to merging). However, some instances can be harder than others: for instance, computing the intersection of two sets when all elements in one set are smaller than the other is much easier than for sets that interleave substantially. Building on this idea, they develop a notion of the complexity of a given instance of a problem and develop algorithms that, for each particular instance, are eﬃcient with respect to the diﬃculty of that instance.

References [1] A. V. Aho, J. E. Hopcroft and J. D. Ullman. The Design and Analysis of Computer Algorithms. Addison Wesley, 1974. [2] S. Alstrup, A. M. Ben-Amram and T. Rauhe. Worst-case and amortised optimality in union-ﬁnd (extended abstract). Proc. 31st Annual Symposium on Theory of Computing, ACM, 1999, pp. 499–506. [3] A. Andersson and T. Ottmann. New tight bounds on uniquely represented dictionaries. SIAM Journal on Computing 24(1995), pp. 1091–1101. [4] L. Banachowsky. A complement to Tarjan’s result about the lower bound on the complexity of the set union problem. Information Processing Letters, 11 (1980), pp. 59–65. [5] P. Beame and F. E. Fich. Optimal bounds for the predecessor problem and related problems. Journal of Computer and System Sciences 65 (2002), pp. 38–72. [6] A. M. Ben-Amram and Z. Galil. On data structure tradeoﬀs and an application to union-ﬁnd. Electronic Colloquium on Computational Complexity, Technical Report TR95-062, 1995. [7] M. A. Bender, S. Sethia and S. Skiena. Data structures for maintaining set partitions. Manuscript, 2004. Preliminary version in Proc. 7th Scandinavian Workshop on Algorithm Theory, Lecture Notes in Computer Science, Springer-Verlag, Berlin, vol. 1851, pp. 83–96, 2000. [8] N. Blum. The single-operation worst case [9] G. Calinescu. A note on data structures for maintaining partitions. Manuscript, 2003. [10] E. D. Demaine, A. L´ opez-Ortiz and J. I. Munro. Adaptive Set Intersections, Unions and Diﬀerences. In Proc. 12th Annual ACM-SIAM Symposium on Discrete Algorithms, ACM/SIAM, 2001, pp. 743–752. [11] P. F. Dietz, K. Mehlhorn, R. Raman and C. Uhrig. Lower bounds for set intersection queries. Algorithmica, 14 (1995), pp. 154–168. [12] P. F. Dietz and R. Raman. Persistence, amortisation and randomisation. In Proc. 2nd Annual ACM-SIAM Symposium on Discrete Algorithms, ACM/SIAM, pp. 77-87, 1991. [13] P. F. Dietz and R. Raman. Persistence, randomization and parallelization: On some combinatorial games and their applications (Abstract). In Proc. 3rd Workshop on Algorithms and Data Structures, Lecture Notes in Computer Science, Springer-Verlag, vol. 709, pp. 289–301, 1993. [14] M. L. Fredman. A lower bound on the complexity of orthogonal range queries. Journal of the ACM, 28 (1981), pp. 696–705. [15] M. L. Fredman and M. Saks. The cell probe complexity of dynamic data structures. In Proc. 21st Annual ACM Symposium on Theory of Computing, ACM, pp. 345–354, 1989. [16] H. N. Gabow. A scaling algorithm for weighted matching on general graphs. In Proc. 26th Annual Symposium on Foundations of Computer Science, IEEE Computer Society, pp. 90-100, 1985.

© 2005 by Chapman & Hall/CRC

Data Structures for Sets

33-21

[17] T. Hagerup. Sorting and searching on the word RAM. In Proc. 15th Symposium on Theoretical Aspects of Computer Science (STACS 1998), Lecture Notes in Computer Science, Springer-Verlag, Berlin, vol. 1373, pp. 366–398, 1998. [18] Z. Galil and G. F. Italiano. Data structures and algorithms for disjoint set union problems. ACM Computing Surveys, 23 (1991), pp. 319–344. [19] H. Kaplan, N. Shafrir and R. E. Tarjan. Meldable heaps and boolean union-ﬁnd. In Proc. 34th Annual ACM Symposium on Theory of Computing, ACM, 2002, pp. 573–582. [20] H. Kaplan, N. Shafrir and R. E. Tarjan. Union-ﬁnd with deletions. In Proc. 13th Annual ACM-SIAM Symposium on Discrete Algorithms, ACM/SIAM, 2002, pp. 19–28. [21] D. E. Knuth. The Art of Computer Programming vol. 3, 2nd Ed. Addison Wesley, 1998. [22] A. N. Kolmogorov. On the notion of algorithm. Uspekhi Matematicheskikh Nauk 8 (1953), pp. 175–176. [23] M. J. van Kreveld and M. H. Overmars. Union-copy data structures and dynamic segment trees. Journal of the ACM, 40 (1993), pp. 635–652. [24] T. W. Lam and K. H. Lee. An improved scheme for set equality testing and updating. Theoretical Computer Science, 201 (1998), pp. 85–97. [25] K. Mehlhorn. Data Structures and Algorithms, Vol. III: Multi-dimensional Searching and Computational Geometry. Springer-Verlag, Berlin, 1984. [26] M. H. Overmars. The Design of Dynamic Data Structures. Lecture Notes in Computer Science, Springer-Verlag, Berlin, vol. 156, 1983. [27] J. A. La Poutr´e. New techniques for the union-ﬁnd problem. In Proc. 1st Annual ACM-SIAM Symposium on Discrete Algorithms, ACM/SIAM, pp. 54–63, 1990. [28] J. A. La Poutr´e. Lower bounds for the union-ﬁnd and the split-ﬁnd problem on pointer machines. Journal of Computer and System Sciences, 52 (1996), pp. 87–99. [29] P. Pritchard. Opportunistic algorithms for eliminating supersets. Acta Informatica 28 (1991), pp. 733–754. [30] P. Pritchard. A simple sub-quadratic algorithm for computing the subset partial order. Information Processing Letters, 56 (1995), pp. 337–341. [31] P. Pritchard. An old sub-quadratic algorithm for ﬁnding extremal sets. Information Processing Letters, 62 (1997), pp. 329–334. [32] P. Pritchard. A fast bit-parallel algorithm for computing the subset partial order. Algorithmica, 24 (1999), pp. 76–86. [33] W. Pugh. Incremental computation and the incremental evaluation of function programs. PhD Thesis, Cornell University, 1989. [34] W. Pugh and T. Teitelbaum. Incremental computation via function caching. In Con-

[35] [36] [37]

[38] [39]

ference Record of the 16th Annual ACM Symposium on Principles of Programming Languages, ACM, 1989, pp. 315–328. A. Sch¨ onage. Storage modiﬁcation machines. SIAM Journal on Computing, 9 (1980), pp. 490–508. R. Seidel and C. Aragon. Randomized search trees Algorithmica, 16 (1996), pp. 464–497. M. Smid. A data structure for the union-ﬁnd problem having good single-operation complexity. In Algorithms Review, Newsletter of the ESPRIT II Basic Research Action program project no. 3075, 1, ALCOM, 1990. R. Sundar and R. E. Tarjan. Unique binary-search-tree representations and equality testing of sets and sequences. SIAM Journal on Computing, 23 (1994), pp. 24–44. R. E. Tarjan. Eﬃciency of a good but not linear set union algorithm. Journal of the

© 2005 by Chapman & Hall/CRC

33-22

Handbook of Data Structures and Applications

ACM 22 (1975), pp. 215–225. [40] R. E. Tarjan. A class of algorithms which require non linear time to maintain disjoint sets. Journal of Computer and System Sciences 18 (1979), pp. 110–127. [41] R. E. Tarjan and J. van Leeuwen. Worst-case analysis of set union algorithms. Journal of the ACM 31 (1984), pp. 245–281. [42] D. E. Willard. New trie data structures which support very fast search operations. [43] A. C. Yao. On the complexity of maintaining partial sums. SIAM Journal on Computing, 14 (1985), pp. 277–288. [44] D. M. Yellin. Representing sets with constant time equality testing. Journal of Algorithms, 13 (1992), pp. 353–373. [45] D. M. Yellin. An algorithm for dynamic subset and intersection testing. Theoretical Computer Science, 129 (1994), pp. 397–406. [46] D. M. Yellin and C. S. Jutla. Finding extremal sets in less than quadratic time. Information Processing Letters, 48 (1993), pp. 29–34.

© 2005 by Chapman & Hall/CRC

34 Cache-Oblivious Data Structures 34.1 34.2

The Cache-Oblivious Model . . . . . . . . . . . . . . . . . . . . . . Fundamental Primitives . . . . . . . . . . . . . . . . . . . . . . . . . . . Van Emde Boas Layout

34.3

Lars Arge

34.4

Gerth Stølting Brodal

•

34.5

Rolf Fagerberg

Priority Queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-12 •

2d Orthogonal Range Searching . . . . . . . . . . . . . . . . . . 34-21 Cache-Oblivious kd-Tree Tree

University of Southern Denmark

34-8

Exponential Tree Based

Merge Based Priority Queue: Funnel Heap Exponential Level Based Priority Queue

University of Aarhus

34.1

k -Merger

Dynamic B-Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Density Based

Duke University

•

34-1 34-3

•

Cache-Oblivious Range

The Cache-Oblivious Model

The memory system of most modern computers consists of a hierarchy of memory levels, with each level acting as a cache for the next; for a typical desktop computer the hierarchy consists of registers, level 1 cache, level 2 cache, level 3 cache, main memory, and disk. One of the essential characteristics of the hierarchy is that the memory levels get larger and slower the further they get from the processor, with the access time increasing most dramatically between main memory and disk. Another characteristic is that data is moved between levels in large blocks. As a consequence of this, the memory access pattern of an algorithm has a major inﬂuence on its practical running time. Unfortunately, the RAM model (Figure 34.1) traditionally used to design and analyze algorithms is not capable of capturing this, since it assumes that all memory accesses take equal time. Because of the shortcomings of the RAM model, a number of more realistic models have been proposed in recent years. The most successful of these models is the simple two-level I/O-model introduced by Aggarwal and Vitter [2] (Figure 34.2). In this model the memory hierarchy is assumed to consist of a fast memory of size M and a slower inﬁnite memory, and data is transfered between the levels in blocks of B consecutive elements. Computation Slow memory

Memory CPU

FIGURE 34.1: The RAM model.

CPU

Fast memory

Block

FIGURE 34.2: The I/O model.

34-1

© 2005 by Chapman & Hall/CRC

34-2

Handbook of Data Structures and Applications

can only be performed on data in the fast memory, and it is assumed that algorithms have complete control over transfers of blocks between the two levels. We denote such a transfer a memory transfer. The complexity measure is the number of memory transfers needed to solve a problem. The strength of the I/O model is that it captures part of the memory hierarchy, while being suﬃciently simple to make design and analysis of algorithms feasible. In particular, it adequately models the situation where the memory transfers between two levels of the memory hierarchy dominate the running time, which is often the case when the size of the data exceeds the size of main memory. Agarwal and Vitter showed N that comparison based sorting and searching require Θ(SortM,B (N )) = Θ( N B logM/B B ) and Θ(logB N ) memory transfers in the I/O-model, respectively [2]. Subsequently a large number of other results have been obtained in the model; see the surveys by Arge [4] and Vitter [27] for references. Also see Chapter 27. More elaborate models of multi-level memory than the I/O-model have been proposed (see e.g. [27] for an overview) but these models have been less successful, mainly because of their complexity. A major shortcoming of the proposed models, including the I/O-model, have also been that they assume that the characteristics of the memory hierarchy (the level and block sizes) are known. Very recently however, the cache-oblivious model, which assumes no knowledge about the hierarchy, was introduced by Frigo et al. [20]. In essence, a cache-oblivious algorithm is an algorithm formulated in the RAM model but analyzed in the I/O model, with the analysis required to hold for any B and M . Memory transfers are assumed to be performed by an oﬀ-line optimal replacement strategy. The beauty of the cache-oblivious model is that since the I/O-model analysis holds for any block and memory size, it holds for all levels of a multi-level memory hierarchy (see [20] for details). In other words, by optimizing an algorithm to one unknown level of the memory hierarchy, it is optimized on all levels simultaneously. Thus the cache-oblivious model is eﬀectively a way of modeling a complicated multi-level memory hierarchy using the simple two-level I/O-model. Frigo et al. [20] described optimal Θ(SortM,B (N )) memory transfer cache-oblivious algorithms for matrix transposition, fast Fourier transform, and sorting; Prokop also described a static search tree obtaining the optimal O(logB N ) transfer search bound [24]. Subsequently, Bender et al. [11] described a cache-oblivious dynamic search trees with the same search cost, and simpler and improved cache-oblivious dynamic search trees were then developed by several authors [10, 12, 18, 25]. Cache-oblivious algorithms have also been developed for e.g. problems in computational geometry [1, 10, 15], for scanning dynamic sets [10], for layout of static trees [8], for partial persistence [10], and for a number of fundamental graph problems [5] using cache-oblivious priority queues [5, 16]. Most of these results make the so-called tall cache assumption, that is, they assume that M > Ω(B 2 ); we make the same assumption throughout this chapter. Empirical investigations of the practical eﬃciency of cache-oblivious algorithms for sorting [19], searching [18, 23, 25] and matrix problems [20] have also been performed. The overall conclusion of these investigations is that cache-oblivious methods often outperform RAM algorithms, but not always as much as algorithms tuned to the speciﬁc memory hierarchy and problem size. On the other hand, cache-oblivious algorithms perform well on all levels of the memory hierarchy, and seem to be more robust to changing problem sizes than cache-aware algorithms. In the rest of this chapter we describe some of the most fundamental and representative cache-oblivious data structure results. In Section 34.2 we discuss two fundamental primitives used to design cache-oblivious data structures. In Section 34.3 we describe two cache-oblivious dynamic search trees, and in Section 34.4 two priority queues. Finally, in Section 34.5 we discuss structures for 2-dimensional orthogonal range searching.

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34.2

34-3

Fundamental Primitives

The most fundamental cache-oblivious primitive is scanning—scanning an array with N elements incurs Θ( N B ) memory transfers for any value of B. Thus algorithms such as median ﬁnding and data structures such as stacks and queues that only rely on scanning are automatically cache-oblivious. In fact, the examples above are optimal in the cacheoblivious model. Other examples of algorithms that only rely on scanning include Quicksort and Mergesort. However, they are not asymptotically optimal in the cache-oblivious model N since they use O( N B log M ) memory transfers rather than Θ(SortM,B (N )). Apart from algorithms and data structures that only utilize scanning, most cache-oblivious results use recursion to obtain eﬃciency; in almost all cases, the sizes of the recursive problems decrease double-exponentially. In this section we describe two of the most fundamental such recursive schemes, namely the van Emde Boas layout and the k-merger.

34.2.1

Van Emde Boas Layout

One of the most fundamental data structures in the I/O-model is the B-tree [7]. A B-tree is basically a fanout Θ(B) tree with all leaves on the same level. Since it has height O(logB N ) and each node can be accessed in O(1) memory transfers, it supports searches in O(logB N ) memory transfers. It also supports range queries, that is, the reporting of all K elements in a given query range, in O(logB N + K B ) memory transfers. Since B is an integral part of the deﬁnition of the structure, it seems challenging to develop a cache-oblivious B-tree structure. However, Prokop [24] showed how a binary tree can be laid out in memory in order to obtain a (static) cache-oblivious version of a B-tree. The main idea is to use a recursively deﬁned layout called the van Emde Boas layout closely related to the deﬁnition of a van Emde Boas tree [26]. The layout has been used as a basic building block of most cache-oblivious search structures (e.g in [1, 8, 10–12, 18, 25]). Layout

For simplicity, we only consider complete binary trees. A binary tree is complete if it has N = 2h − 1 nodes and height h for some integer h. The basic idea in the van Emde Boas layout of a complete binary tree T with N leaves is to divide T at the middle level and lay out the pieces recursively (Figure 34.3). More precisely, if T only has one node it is simply laid out as a single node in memory. Otherwise, we deﬁne the top tree T0 to be the subtree consisting√of the nodes in the topmost h/2 levels of T , and the bottom trees T1 , . . . , Tk to be the Θ( N√) subtrees rooted in the nodes on level h/2 of T ; note that all the subtrees have size Θ( N ). The van Emde Boas layout of T consists of the van Emde Boas layout of T0 followed by the van Emde Boas layouts of T1 , . . . , Tk . Search

To analyze the number of memory transfers needed to perform a search in T , that is, traverse a root-leaf path, we consider the ﬁrst recursive level of the van Emde Boas layout where the subtrees √ are smaller than B. As this level T is divided into a set of base trees of size between Θ( B) and Θ(B), that is, of height Ω(log B) (Figure 34.4). By the deﬁnition of the layout, each base tree is stored in O(B) contiguous memory locations and can thus be accessed in O(1) memory transfers. That the search is performed in O(logB N ) memory transfers then follows since the search path traverses O((log N )/ log B) = O(log B N ) diﬀerent base trees.

© 2005 by Chapman & Hall/CRC

34-4

Handbook of Data Structures and Applications

···

h/2 T0

··· ···

h ···

···

h/2

T1

···

Tk

···

···

···

T0

T1

···

Tk

FIGURE 34.3: The van Emde Boas layout.

···

··· ···

···

···

FIGURE 34.4: A search path.

Range query

To analyze the number of memory transfers needed to answer a range query [x1 , x2 ] on T using the standard recursive algorithm that traverses the relevant parts of T (starting at the root), we ﬁrst note that the two paths to x1 and x2 are traversed in O(logB N ) memory transfers. Next we consider traversed nodes v that are not on the two paths to x1 and x2 . Since all elements in the subtree Tv rooted at such a node v are reported, and since a subtree of height log B stores Θ(B) elements, O( K B ) subtrees Tv of height log B are visited. This in turn means that the number of visited nodes above the last log B levels K of T is also O( K B ); thus they can all be accessed in O( B ) memory transfers. Consider the smallest recursive level of the van Emde Boas layout that completely contain Tv . This 2 level is of size between Ω(B) and O(B √ ) (Figure 34.5(a)). On the next level √ of recursion Tv is broken into a top part and O( B) bottom parts of size between Ω( B) and O(B) each (Figure 34.5(b)). The top part is contained in a recursive level of size O(B) and is thus stored within O(B) consecutive memory locations; therefore it can be accessed in √ O(1) memory accesses. Similarly, the O(B) nodes in the O( B) bottom parts are stored consecutively in memory; therefore they can all be accessed in a total of O(1) memory transfers. Therefore, the optimal paging strategy can ensure that any traversal of Tv is performed in O(1) memory transfers, simply by accessing the relevant O(1) blocks. Thus overall a range query is performed in O(logB N + K B ) memory transfers.

Size between Ω(B) and O(B 2 )

Size between √ Ω( B) and O(B) v

v

(a)

(b)

FIGURE 34.5: Traversing tree Tv with O(B) leaves; (a) smallest recursive van Emde Boas level containing Tv has size between Ω(B) and O(B 2 ); (b) next level in recursive subdivision.

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-5

Let T be a complete binary tree with N leaves laid out using the van Emde Boas layout. The number of memory transfers needed to perform a search (traverse a root-to-leaf path) and a range query in T is O(logB N ) and O(logB N + K B ), respectively.

THEOREM 34.1

Note that the navigation from node to node in the van Emde Boas layout is straightforward if the tree is implemented using pointers. However, navigation using arithmetic on array indexes is also possible [18]. This avoids the use of pointers and hence saves space. The constant in the O(logB N ) bound for searching in Theorem 34.1 can be seen to be four. Further investigations of which constants are possible for cache-oblivious comparison based searching appear in [9].

34.2.2

k -Merger

In the I/O-model the two basic optimal sorting algorithms are multi-way versions of Mergesort and distribution sorting (Quicksort) [2]. Similarly, Frigo et al. [20] showed how both merge based and distribution based optimal cache-oblivious sorting algorithms can be developed. The merging based algorithm, Funnelsort, is based on a so-called k-merger. This structure has been used as a basic building block in several cache-oblivious algorithms. Here we describe a simpliﬁed version of the k-merger due to Brodal and Fagerberg [15]. Binary mergers and merge trees

A binary merger merges two sorted input streams into a sorted output stream: In one merge step an element is moved from the head of one of the input streams to the tail of the output stream; the heads of the input streams, as well as the tail of the output stream, reside in buﬀers of a limited capacity. Binary mergers can be combined to form binary merge trees by letting the output buﬀer of one merger be the input buﬀer of another—in other words, a binary merge tree is a binary tree with mergers at the nodes and buﬀers at the edges, and it is used to merge a set of sorted input streams (at the leaves) into one sorted output stream (at the root). Refer to Figure 34.6 for an example. An invocation of a binary merger in a binary merge tree is a recursive procedure that performs merge steps until the output buﬀer is full (or both input streams are exhausted); if Input buﬀers q 1 q 1 q 1 q 1 q 1 q 1 q 1 q 1 -

s 3 s 3 s 3 s 3

^ N

Output buﬀer

^

FIGURE 34.6: A 16-merger consisting of 15 binary mergers. Shaded parts represent elements in buﬀers.

© 2005 by Chapman & Hall/CRC

34-6

Handbook of Data Structures and Applications

Procedure Fill(v) while v’s output buﬀer is not full if left input buﬀer empty Fill(left child of v) if right input buﬀer empty Fill(right child of v) perform one merge step

FIGURE 34.7: Invocation of binary merger v. an input buﬀer becomes empty during the invocation (and the corresponding stream is not exhausted), the input buﬀer is recursively ﬁlled by an invocation of the merger having this buﬀer as output buﬀer. If both input streams of a merger get exhausted, the corresponding output stream is marked as exhausted. A procedure Fill(v) performing an invocation of a binary merger v is shown in Figure 34.7 (ignoring exhaustion issues). A single invocation Fill(r) on the root r of a merge tree will merge the streams at the leaves of the tree. k -merger A k-merger is a binary merge tree with speciﬁc buﬀer sizes. For simplicity, we assume that k is a power of two, in which case a k-merger is a complete binary tree of k − 1 binary mergers. The output buﬀer at the root has size k 3 , and the sizes of the rest of the buﬀers are deﬁned recursively in a manner resembling the deﬁnition of the van Emde Boas layout: Let i = log k be the height of the k-merger. We deﬁne the top tree to be the subtree consisting of all mergers of depth at most i/2, and the bottom trees to be the subtrees rooted in nodes at depth i/2 + 1. We let the edges between the top and bottom trees have buﬀers of size k 3/2 , and deﬁne the sizes of the remaining buﬀers by recursion on the top and bottom trees. The input buﬀers at the leaves hold the input streams and are not part of the k-merger deﬁnition. The space required by a k-merger, excluding the output buﬀer at the root, is given by S(k) = k 1/2 · k 3/2 + (k 1/2 + 1) · S(k 1/2), which has the solution S(k) = Θ(k 2 ). We now analyze the number of memory transfers needed to ﬁll the output buﬀer of size k 3 at the root of a k-merger. In the recursive deﬁnition of the buﬀer sizes in the k-merger, consider the ﬁrst level where the subtrees (excluding output buﬀers) have size less than M/3; if k¯ is the number of leaves of one such subtree, we by the space usage of k-mergers have k¯ 2 ≤ M/3 and (k¯2 )2 = k¯4 = Ω(M ). We call these subtrees of the k-merger base trees and the buﬀers between the base trees large buﬀers. Assuming B 2 ≤ M/3, a base tree Tv rooted in v together with one block from each of the large buﬀers surrounding it (i.e., its single output buﬀer and k¯ input buﬀers) can be contained in fast memory, since M/3 + B + k¯ · B ≤ M/3 + B + (M/3)1/2 · (M/3)1/2 ≤ M . If the k-merger consists of a single base tree, the number of memory transfers used to ﬁll its output buﬀer with k 3 elements during an invocation is trivially O(k 3 /B + k). Otherwise, consider an invocation of the root v of a base tree Tv , which will ﬁll up the size Ω(k¯ 3 ) output buﬀer of v. Loading Tv and one ¯ memory block for each of the k¯ buﬀers just below it into fast memory will incur O(k¯ 2 /B + k) transfers. This is O(1/B) memory transfer for each of the Ω(k¯ 3 ) elements output, since k¯ 4 = Ω(M ) implies k¯2 = Ω(M 1/2 ) = Ω(B), from which k¯ = O(k¯ 3 /B) follows. Provided that none of the input buﬀers just below Tv become empty, the output buﬀer can then be ﬁlled in O(k¯ 3 /B) memory transfers since elements can be read from the input buﬀers in

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-7

O(1/B) transfers amortized. If a buﬀer below Tv becomes empty, a recursive invocation is needed. This invocation may evict Tv from memory, leading to its reloading when the invocation ﬁnishes. We charge this cost to the Ω(k¯3 ) elements in the ﬁlled buﬀer, or O(1/B) memory transfers per element. Finally, the last time an invocation is used to ﬁll a particular buﬀer, the buﬀer may not be completely ﬁlled (due to exhaustion). However, this happens only once for each buﬀer, so we can pay the cost by charging O(1/B) memory transfers to each position in each buﬀer in the k-merger. As the entire k-merger uses O(k 2 ) space and merges k 3 elements, these charges add up to O(1/B) memory transfers per element. We charge an element O(1/B) memory transfers each time it is inserted into a large buﬀer. Since k¯ = Ω(M 1/4 ), each element is inserted in O(logk¯ k) = O(logM k 3 ) large buﬀers. Thus we have the following.

Excluding the output buﬀers, the size of a k-merger is O(k 2 ) and it performs logM k 3 + k) memory transfers during an invocation to ﬁll up its output 3 buﬀer of size k . THEOREM 34.2 3 O( kB

Funnelsort

The cache-oblivious sorting algorithm Funnelsort is easily obtained once the k-merger structure is deﬁned: Funnelsort breaks the N input elements into N 1/3 groups of size N 2/3 , sorts them recursively, and then merges the sorted groups using an N 1/3 -merger. Funnelsort can be analyzed as follows: Since the space usage of a k-merger is sub-linear in its output, the elements in a recursive sort of size M/3 only need to be loaded into memory once during the entire following recursive sort. For k-mergers at the remaining higher levels in the recursion tree, we have k 3 ≥ M/3 ≥ B 2 , which implies k 2 ≥ B 4/3 > B and hence k 3 /B > k. By Theorem 34.2, the number of memory transfers during a merge involving N elements is then O(logM (N )/B) per element. Hence, the total number of memory transfers per element is O

1 B

1+

∞

logM N

(2/3)i

= O ((logM N )/B) .

i=0

Since logM x = Θ(logM/B x) when B 2 ≤ M/3, we have the following theorem.

THEOREM 34.3

Funnelsort sorts N element using O(SortM,B (N )) memory transfers.

In the above analysis, the exact (tall cache) assumption on the size of the fast memory is B 2 ≤ M/3. In [15] it is shown how to generalize Funnelsort such that it works under the weaker assumption B 1+ε ≤ M , for ﬁxed ε > 0. The resulting algorithm incurs the optimal O(SortM,B (N )) memory transfers when B 1+ε = M , at the price of incurring O( 1ε · SortM,B (N )) memory transfers when B 2 ≤ M . It is shown in [17] that this trade-oﬀ is the best possible for comparison based cache-oblivious sorting.

© 2005 by Chapman & Hall/CRC

34-8

34.3

Handbook of Data Structures and Applications

Dynamic B-Trees

The van Emde Boas layout of a binary tree provides a static cache-oblivious version of B-trees. The ﬁrst dynamic solution was given Bender et al. [11], and later several simpliﬁed structures were developed [10, 12, 18, 25]. In this section, we describe two of these structures [10, 18].

34.3.1

Density Based

In this section we describe the dynamic cache-oblivious search tree structure of Brodal et al. [18]. A similar proposal was given independently by Bender et al. [12]. The basic idea in the structure is to embed a dynamic binary tree of height log N + O(1) into a static complete binary tree, that is, in a tree with 2h − 1 nodes and height h, which in turn is embedded into an array using the van Emde Boas layout. Refer to Figure 34.8. To maintain the dynamic tree we use techniques for maintaining small height in a binary tree developed by Andersson and Lai [3]; in a diﬀerent setting, similar techniques has also been given by Itai et al. [21]. These techniques give an algorithm for maintaining height log N + O(1) using amortized O(log2 N ) time per update. If the height bound is violated after performing an update in a leaf l, this algorithm performs rebalancing by rebuilding the subtree rooted at a speciﬁc node v on the search path from the root to l. The subtree is rebuilt to perfect balance in time linear in the size of the subtree. In a binary tree of perfect balance the element in any node v is the median of all the elements stored in the subtree Tv rooted in v. This implies that only the lowest level in Tv is not completely ﬁlled and the empty positions appearing at this level are evenly distributed across the level. Hence, the net eﬀect of the rebuilding is to redistribute the empty positions in Tv . Note that this can lower the cost of future insertions in Tv , and consequently it may in the long run be better to rebuild a subtree larger than strictly necessary for reestablishment of the height bound. The criterion for choosing how large a subtree to rebuild, i.e. for choosing the node v, is the crucial part of the algorithms by Andersson and Lai [3] and Itai et al. [21]. Below we give the details of how they can be used in the cache-oblivious setting. 6 4

8

1

5

7

11

3

10

13

⇓ 6

4

8

1

−

3

5

−

−

7

−

−

11 10

13

FIGURE 34.8: Illustration of embedding a height H tree into a complete static tree of height H, and the van Emde Boas layout of this tree.

Structure

As mentioned, the data structure consists of a dynamic binary tree T embedded into a static complete binary tree T of height H, which in turn is embedded into an array using the van Emde Boas layout.

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-9

In order to present the update and query algorithms, we deﬁne the density ρ(u) of a node u as |Tu |/|Tu |, where |Tu | and |Tu | are the number of nodes in the trees rooted in u in T and T , respectively. In Figure 34.8, the node containing the element 4 has balance 4/7. We also deﬁne two density thresholds τi and γi for the nodes on each level i = 1, 2, . . . , H (where the root is at level 1). The upper density thresholds τi are evenly space values between 3/4 and 1, and the lower density thresholds γi are evenly spaced values between 1/4 and 1/8. More precisely, τi = 3/4 + (i − 1)/(4(H − 1)) and γi = 1/4 − (i − 1)/(8(H − 1)). Updates

To insert a new element into the structure we ﬁrst locate the position in T of the new node w. If the insertion of w violates the height bound H, we rebalance T as follows: First we ﬁnd the lowest ancestor v of w satisfying γi ≤ ρ(v) ≤ τi , where i is the level of v. If no ancestor v satisﬁes the requirement, we rebuild the entire structure, that is, T , T and the layout of T : For k the integer such that 2k ≤ N < 2k+1 we choose the new height H of the tree T as k + 1 if N ≤ 5/4 · 2k ; otherwise we choose H = k + 2. On the other hand, if the ancestor v exists we rebuild Tv : We ﬁrst create a sorted list of all elements in Tv by an in-order traversal of Tv . The |Tv |/2th element becomes the element stored at v, the smallest (|Tv | − 1)/2 elements are recursively distributed in the left subtree of v, and the largest (|Tv | − 1)/2 elements are recursively distributed in the right subtree of v. We can delete an element from the structure in a similar way: We ﬁrst locate the node w in T containing the element e to be deleted. If w is not a leaf and has a right subtree, we then locate the node w containing the immediate successor of e (the node reached by following left children in the right subtree of w), swap the elements in w and w , and let w = w . We repeat this until w is a leaf. If on the other hand w is not a leaf but only has a left subtree, we instead repeatedly swap w with the node containing the predecessor of e. Finally, we delete the leaf w from T , and rebalance the tree by rebuilding the subtree rooted at the lowest ancestor v of w satisfying satisfying γi ≤ ρ(v) ≤ τi , where i is the level of v; if no such node exists we rebuild the entire structure completely. Similar to the proof of Andersson and Lai [3] and Itai et al. [21] that updates are performed in O(log2 N ) time, Brodal et al. [18] showed that using the above algorithms, updates can be performed in amortized O(logB N + (log2 N )/B) memory transfers. Range queries

In Section 34.2, we discussed how a range query can be answered in O(logB N + K B) memory transfers on a complete tree T laid out using the van Emde Boas layout. Since it can be shown that the above update algorithm maintains a lower density threshold of 1/8 for all nodes, we can also perform range queries in T eﬃciently: To answer a range query [x1 , x2 ] we traverse the two paths to x1 and x2 in T , as well as O(log N ) subtrees rooted in children of nodes on these paths. Traversing one subtree Tv in T incurs at most the number of memory transfers needed to traverse the corresponding (full) subtree Tv in T . By the lower density threshold of 1/8 we know that the size of Tv is at most a factor of eight larger than the size of Tv . Thus a range query is answered in O(logB N + K B ) memory transfers. There exists a linear size cache-oblivious data structure for storing N elements, such that updates can be performed in amortized O(logB N +(log2 N )/B) memory transfers and range queries in O(logB N + K B ) memory transfers. THEOREM 34.4

Using the method for moving between nodes in a van Emde Boas layout using arithmetic on the node indices rather than pointers, the above data structure can be implemented as

© 2005 by Chapman & Hall/CRC

34-10

Handbook of Data Structures and Applications

a single size O(N ) array of data elements. The amortized complexity of updates can also be lowered to O(logB N ) by changing leaves into pointers to buckets containing Θ(log N ) elements each. With this modiﬁcation a search can still be performed in O(log B N ) memory transfers. However, then range queries cannot be answered eﬃciently, since the O( logKN ) buckets can reside in arbitrary positions in memory.

34.3.2

Exponential Tree Based

The second dynamic cache-oblivious search tree we consider is based on the so-called exponential layout of Bender et al. [10]. For simplicity, we here describe the structure slightly diﬀerently than in [10]. Structure

Consider a complete balanced binary tree T with N leaves. Intuitively, the idea in an exponential layout of T is to recursively decompose T into a set of components, which are each laid out using the van Emde Boas layout. More precisely, we deﬁne √ component C0 to consist of the ﬁrst 12 log N levels of T . The component C0 contains N nodes and is called an N -component because its root is the root of a tree with N leaves (that is, T ). To obtain the exponential layout of T , we ﬁrst store√C0 using the van Emde Boas layout, followed immediately by the recursive layout of the N subtrees, T1 , T2 , . . . , T√N , of size √ N , beneath C0 in T , ordered from left to right. Note how the deﬁnition of the exponential layout naturally deﬁnes a decomposition of T into log log N + O(1) layers, √ with layer i 1/2i−1 consisting of a number of N -components. An X-component is of size Θ( X) and its √ √ Θ( X) leaves are connected to X-components. Thus the root of an X-component is the root of a tree containing X elements. Refer to Figure 34.9. Since the described layout of T is really identical to the van Emde Boas layout, it follows immediately that it uses linear space and that a root-to-leaf path can be traversed in O(logB N ) memory transfers. layer 1 N -component

C0 2

√ C √N

C1

log log N

Ta

C0 √

C1 N

Tb

Ty

T1 Ta ... √ N

Tb

N -components

Tz T√N ... ... C√ N Ty √ ... N

Tz

FIGURE 34.9: Components and exponential layout.

By slightly relaxing the requirements on the layout described above, we are able to maintain it dynamically: We deﬁne an exponential layout of a balanced binary tree T with N leaves to consist of a composition of T into log log N + O(1) layers, with layer i consisting

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-11

i−1

of a number of N 1/2 -components, each √ laid out using the van Emde Boas layout (Figure 34.9). An X-component has size Θ( X) but unlike above we allow its root to be root in a tree containing between X Note √ √ and 2X elements. √ √ how this means that an X-component has between X/2 X = 12 X and 2X/ X = 2 X leaves. We store the layout of T in memory almost √ as previously: If the root of T is root in an X-component C0 , we store C0 ﬁrst in 2 · 2 X − 1 memory locations (the √ maximal size of an X-component), followed immediately by the layouts of the subtrees ( X-components) rooted √ in the leaves of C0 (in no particular order). We make room in the layout for the at most 2 X such subtrees. This √ √ √ exponential layout for T uses S(N ) = Θ( N ) + 2 N · S( N ) space, which is Θ(N log N ). Search

Even with the modiﬁed deﬁnition of the exponential layout, we can traverse any rootto-leaf path in T in O(logB N ) memory transfers: The path passes through exactly one i−1 N 1/2 -component for 1 ≤ i√≤ log log N + O(1). Each X-component is stored in a van √ Emde Boas layout of size Θ( X) and can therefore be traversed in Θ(logB X) memory transfers (Theorem 34.1). Thus, if we use at least one memory transfer in each component, we perform a search in O(logB N )+log log N memory accesses. However, we do not actually use a memory transfer √ for each of the log log N + O(1) components:√Consider the traversed X-component with B ≤ X ≤ B. This component is of size O( B) and can therefore be √ loaded √ in O(1) memory transfers. All smaller traversed components are of total size O( B log B) = O(B), and since they are stored in consecutively memory locations they can also be traversed in O(1) memory transfers. Therefore only O(1) memory transfers are used to traverse the last log log B − O(1) components. Thus, the total cost of traversing a root-to-leaf path is O(logB N + log log N − log log B) = O(logB N ). Updates

To perform an insertion in T we ﬁrst search for the leaf l where we want to perform the insertion; inserting the new element below l will increase the number of elements stored below each of the log log N + O(1) components on the path to the root, and may thus result in several components needing rebalancing (an X-component with 2X elements stored below it). We perform the insertion and rebalance the tree in a simple way as follows: We ﬁnd the topmost X-component Cj on the path to the root with 2X elements below it. Then we divide these elements into two groups of X elements and store them separately in the exponential layout (eﬀectively we split Cj with 2X elements below it into two X-components with X elements each). This can easily be done in O(X) memory transfers. Finally, we update a leaf and insert a new leaf in the X 2 -component above Cj (corresponding to the two new X-components); we can easily do so in O(X) memory transfers by rebuilding it. Thus overall we have performed the insertion and rebalancing in O(X) memory transfers. The rebuilding guarantees that after rebuilding an X-component, X inserts have to be performed below it before it needs rebalancing again. Therefore we can charge the O(X) cost to the X insertions that occurred below Cj since it was last rebuilt, and argue that each insertion is charged O(1) memory accesses on each of the log log N + O(1) levels. In fact, using the same argument as above for the searching cost, we can argue that we only need to charge an insertion O(1) transfers on the last log log B − O(1) levels of T , since rebalancing on any of these levels can always be performed in O(1) memory transfers. Thus overall we perform an insertion in O(logB N ) memory transfers amortized. Deletions can easily be handled in O(logB N ) memory transfers using global rebuilding: To delete the element in a leaf l of T we simply mark l as deleted. If l’s sibling is also marked as deleted, we mark their parent deleted too; we continue this process along one path to the

© 2005 by Chapman & Hall/CRC

34-12

Handbook of Data Structures and Applications

root of T . This way we can still perform searches in O(logB N ) memory transfers, as long as we have only deleted a fraction of the elements in the tree. After N2 deletes we therefore rebuild the entire structure in O(N logB N ) memory accesses, or O(logB N ) accesses per delete operation. Bender et al. [10] showed how to modify the update algorithms to perform updates “lazily” and obtain worst case O(logB N ) bounds. Reducing space usage

To reduce the space of the layout of a tree T to linear we simply make room for 2 log N elements in each leaf, and maintain that a leaf contains between log N and 2 log N elements. This does not increase the O(logB N ) search and update costs since the O(log N ) elements in a leaf can be scanned in O((log N )/B) = O(logB N ) memory accesses. However, it reduces the number of elements stored in the exponential layout to O(N/ log N ). The exponential layout of a search tree T on N elements uses linear space and supports updates in O(logB N ) memory accesses and searches in O(logB N ) memory accesses. THEOREM 34.5

Note that the analogue of Theorem 34.1 does not hold for the exponential layout, i.e. √ it does not support eﬃcient range queries. The reason is partly that the X-components below an X-component are not located in (sorted) order in memory because components are rebalanced by splitting, and partly because of the leaves containing Θ(log N ) elements. However, Bender et al [10] showed how the exponential layout can be used to obtain a number of other important results: The structure as described above can easily be extended such that if two subsequent searched are separated by d elements, then the second search can be performed in O(log∗ d + logB d) memory transfers. It can also be extended such that R queries (batched searching) can be answered simultaneously in O(R logB N R +SortM,B (R)) memory transfers. The exponential layout can also be used to develop a persistent B-tree, where updates can be performed in the current version of the structure and queries can be performed in the current as well as all previous versions, with both operations incurring O(logB N ) memory transfers. It can also be used as a basic building block in a linear space planar point location structure that answers queries in O(logB N ) memory transfers.

34.4

Priority Queues

A priority queue maintains a set of elements with a priority (or key) each under the operations Insert and DeleteMin, where an Insert operation inserts a new element in the queue, and a DeleteMin operation ﬁnds and deletes the element with the minimum key in the queue. Frequently we also consider a Delete operation, which deletes an element with a given key from the priority queue. This operation can easily be supported using Insert and DeleteMin: To perform a Delete we insert a special delete-element in the queue with the relevant key, such that we can detect if an element returned by a DeleteMin has really been deleted by performing another DeleteMin. A balanced search tree can be used to implement a priority queue. Thus the existence of a dynamic cache-oblivious B-tree immediately implies the existence of a cache-oblivious priority queue where all operations can be performed in O(logB N ) memory transfers, where N is the total number of elements inserted. However, it turns out that one can design a priority queue where all operations can be performed in Θ(SortM,B (N )/N ) = O( B1 logM/B N B)

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-13

memory transfers; for most realistic values of N , M , and B, this bound is less than 1 and we can, therefore, only obtain it in an amortized sense. In this section we describe two diﬀerent structures that obtain these bounds [5, 16].

34.4.1

Merge Based Priority Queue: Funnel Heap

The cache-oblivious priority queue Funnel Heap due to Brodal and Fagerberg [16] is inspired by the sorting algorithm Funnelsort [15, 20]. The structure only uses binary merging; essentially it is a heap-ordered binary tree with mergers in the nodes and buﬀers on the edges. Structure

The main part of the Funnel Heap structure is a sequence of k-mergers (Section 34.2.2) with double-exponentially increasing k, linked together in a list using binary mergers; refer to Figure 34.10. This part of the structure constitutes a single binary merge tree. Additionally, there is a single insertion buﬀer I. More precisely, let ki and si be values deﬁned inductively by (k1 , s1 ) = = si+1 ki+1 =

(2, 8) , si (ki + 1) , si+1 1/3 ,

(34.1)

where x denotes the smallest power of two above x, i.e. x = 2log x . We note that si 1/3 ≤ ki < 2si 1/3 , from which si 4/3 < si+1 < 3si 4/3 follows, so both si and ki grow 4/3 4/3 double-exponentially: si+1 = Θ(si ) and ki+1 = Θ(ki ). We also note that by induction i−1 on i we have si = s1 + j=1 kj sj for all i. A Funnel Heap consists of a linked list with link i containing a binary merger vi , two buﬀers Ai and Bi , and a ki -merger Ki having ki input buﬀers Si1 , . . . , Siki . We refer to Bi , Link i

A1

v1

Ai

vi

B1

Bi

I Ki S11 S12

Si1 Si2

Siki

FIGURE 34.10: Funnel Heap: Sequence of k-mergers (triangles) linked together using buﬀers (rectangles) and binary mergers (circles).

© 2005 by Chapman & Hall/CRC

34-14

Handbook of Data Structures and Applications

Ki , and Si1 , . . . , Siki as the lower part of the link. The size of both Ai and Bi is ki3 , and the size of each Sij is si . Link i has an associated counter ci for which 1 ≤ ci ≤ ki + 1. The initial value of ci is one for all i. The structure also has one insertion buﬀer I of size s1 . We maintain the following invariants: Invariant 1 For link i, Sici , . . . , Siki are empty. Invariant 2 On any path in the merge tree from some buﬀer to the root buﬀer A1 , elements appear in decreasing order. Invariant 3 Elements in buﬀer I appear in sorted order. Invariant 2 can be rephrased as the entire merge tree being in heap order. It implies that in all buﬀers in the merge tree, the elements appear in sorted order, and that the minimum element in the queue will be in A1 or I, if buﬀer A1 is non-empty. Note that an invocation (Figure 34.7) of any binary merger in the tree maintains the invariants. Layout

The Funnel Heap is laid out in consecutive memory locations in the order I, link 1, link 2, . . . , with link i being laid out in the order ci , Ai , vi , Bi , Ki , Si1 , Si2 , . . . , Siki . Operations

To perform a DeleteMin operation we compare the smallest element in I with the smallest element in A1 and remove the smallest of these; if A1 is empty we ﬁrst perform an invocation of v1 . The correctness of this procedure follows immediately from Invariant 2. To perform an Insert operation we insert the new element among the (constant number of) elements in I, maintaining Invariant 3. If the number of elements in I is now s1 , we examine the links in order to ﬁnd the lowest index i for which ci ≤ ki . Then we perform the following Sweep(i) operation. In Sweep(i), we ﬁrst traverse the path p from A1 to Sici and record how many elements are contained in each encountered buﬀer. Then we traverse the part of p going from Ai to Sici , remove the elements in the encountered buﬀers, and form a sorted stream σ1 of the removed elements. Next we form another sorted stream σ2 of all elements in links 1, . . . , i−1 and in buﬀer I; we do so by marking Ai temporarily as exhausted and calling DeleteMin repeatedly. We then merge σ1 and σ2 into a single stream σ, and traverse p again while inserting the front (smallest) elements of σ in the buﬀers on p such that they contain the same numbers of elements as before we emptied them. Finally, we insert the remaining elements from σ into Sici , reset cl to one for l = 1, 2, . . . , i − 1, and increment ci . To see that Sweep(i) does not insert more than the allowed si elements into Sici , ﬁrst note that the lower part of link i is emptied each time ci is reset to one. This implies that the lower part of link i never contains more than the number of elements inserted into Si1 , Si2 , . . . , Siki by the at most ki Sweep(i) operations occurring since last time ci was reset. Since si = s1 + i−1 j=1 kj sj for all i, it follows by induction on time that no instance of Sweep(i) inserts more than si elements into Sici . Clearly, Sweep(i) maintains Invariants 1 and 3, since I and the lower parts of links 1, . . . , i − 1 are empty afterwards. Invariant 2 is also maintained, since the new elements in the buﬀers on p are the smallest elements in σ, distributed such that each buﬀer contains exactly the same number of elements as before the Sweep(i) operation. After the operation, an element on this path can only be smaller than the element occupying the same location before the operation, and therefore the merge tree is in heap order.

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-15

Analysis

To analyze the amortized cost of an Insert or DeleteMin operation, we ﬁrst consider the number of memory transfers used to move elements upwards (towards A1 ) by invocations of binary mergers in the merge tree. For now we assume that all invocations result in full buﬀers, i.e., that no exhaustions occur. We imagine charging the cost of ﬁlling a particular buﬀer evenly to the elements being brought into the buﬀer, and will show that this way an element from an input buﬀer of Ki is charged O( B1 logM/B si ) memory transfers during its ascent to A1 . Our proof rely on the optimal replacement strategy keeping as many as possible of the ﬁrst links of the Funnel Heap in fast memory at all times. To analyze the number of links that ﬁt in fast memory, we deﬁne ∆i to be the sum of the space used by links 1 to i and deﬁne iM to be the largest i for which ∆i ≤ M . By the space bound for k-mergers in Theorem 34.2 we see that the space used by link i is dominated by the Θ(si ki ) = Θ(ki 4 ) 4/3 space use of Si1 , . . . , Siki . Since ki+1 = Θ(ki ), the space used by link i grows doubleexponentially with i. Hence, ∆i is a sum of double-exponentially increasing terms and is therefore dominated by its last term. In other words, ∆i = Θ(ki 4 ) = Θ(si 4/3 ). By 4/3 the deﬁnition of iM we have ∆iM ≤ M < ∆iM +1 . Using si+1 = Θ(si ) we see that logM (siM ) = Θ(1). Now consider an element in an input buﬀer of Ki . If i ≤ iM the element will not get charged at all in our charging scheme, since no memory transfers are used to ﬁll buﬀers in the links that ﬁt in fast memory. So assume i > iM . In that case the element will get charged for the ascent through Ki to Bi and then through vj to Aj for j = i, i − 1, . . . , iM . First consider the cost of ascending through Ki : By Theorem 34.2, an invocation of the root 3 of Ki to ﬁll Bi with ki3 elements incurs O(ki + kBi logM/B ki 3 ) memory transfers altogether. Since M < ∆iM +1 = Θ(ki4M +1 ) we have M = O(ki 4 ). By the tall cache assumption M = Ω(B 2 ) we get B = O(ki 2 ), which implies ki = O(ki 3/B). Under the assumption that no exhaustions occur, i.e., that buﬀers are ﬁlled completely, it follows that an element is charged O( B1 logM/B ki 3 ) = O( B1 logM/B si ) memory transfers to ascend through Ki and into Bi . Next consider the cost of ascending through vj , that is, insertion into Aj , for j = i, i − 1, . . . , iM : Filling of Aj incurs O(1 + |Aj |/B) memory transfers. Since B = O(kiM +1 2 ) = O(kiM 8/3 ) and |Aj | = kj 3 , this is O(|Aj |/B) memory transfers, so an element is charged O(1/B) memory transfers for each Aj (under the assumption of no exhaustions). It only remains to bound the number of such buﬀers Aj , i.e., to bound i − iM . From 4/3

(4/3)i−iM

< si . Using logM (siM ) = Θ(1) we get i−iM = O(log logM si ). si < si+1 we have siM From log logM si = O(logM si ) and the tall cache assumption M = Ω(B 2 ) we get i − iM = O(logM si ) = O(logM/B si ). In total we have proved our claim that, assuming no exhaustions occur, an element in an input buﬀer of Ki is charged O( B1 logM/B si ) memory transfers during its ascent to A1 . We imagine maintaining the credit invariant that each element in a buﬀer holds enough credits to be able to pay for the ascent from its current position to A1 , at the cost analyzed above. In particular, an element needs O( B1 logM/B si ) credits when it is inserted in an input buﬀer of Ki . The cost of these credits we will attribute to the Sweep(i) operation inserting it, eﬀectively making all invocations of mergers be prepaid by Sweep(i) operations. A Sweep(i) operation also incurs memory transfers by itself; we now bound these. In the Sweep(i) operation we ﬁrst form σ1 by traversing the path p from A1 to Sici . Since the links are laid out sequentially in memory, this traversal at most constitutes a linear scan of the consecutive memory locations containing A1 through Ki . Such a scan takes O((∆i−1 + |Ai | + |Bi | + |Ki |)/B) = O(ki 3/B) = O(si /B) memory transfers. Next we form

© 2005 by Chapman & Hall/CRC

34-16

Handbook of Data Structures and Applications

σ2 using DeleteMin operations; the cost of which is paid for by the credits placed on the elements. Finally, we merge of σ1 and σ2 into σ, and place some of the elements in buﬀers on p and some of the elements in Sici . The number of memory transfers needed for this is bounded by the O(si /B) memory transfers needed to traverse p and Sici . Hence, the memory transfers incurred by the Sweep(i) operation itself is O(si /B). After the Sweep(i) operation, the credit invariant must be reestablished. Each of the O(si ) elements inserted into Sici must receive O( B1 logM/B si ) credits. Additionally, the elements inserted into the part of the path p from A1 through Ai−1 must receive enough credits to cover their ascent to A1 , since the credits that resided with elements in the same positions before the operations were used when forming σ2 by DeleteMin operations. This constitutes O(∆i−1 ) = o(si ) elements, which by the analysis above, must receive O( B1 logM/B si ) credits each. Altogether O(si /B) + O( sBi logM/B si ) = O( sBi logM/B si ) memory transfers are attributed to a Sweep(i) operation, again under the assumption that no exhaustions occur during invocations. To actually account for exhaustions, that is, the memory transfers incurred when ﬁlling buﬀers that become exhausted, we note that ﬁlling a buﬀer partly incurs at most the same number of memory transfers as ﬁlling it entirely. This number was analyzed above to be O(|Ai |/B) for Ai and O( |BBi | logM/B si ) for Bi , when i > iM . If Bi become exhausted, only a Sweep(i) can remove that status. If Ai become exhausted, only a Sweep(j) for j ≥ i can remove that status. As at most a single Sweep(j) with j > i can take place between one Sweep(i) and the next, Bi can only become exhausted once for each Sweep(i), and Ai can only become exhausted twice for each Sweep(i). From |Ai | = |Bi | = ki 3 = Θ(si ) it follows that charging Sweep(i) an additional cost of O( sBi logM/B si ) memory transfers will cover all costs of ﬁlling buﬀers when exhaustion occurs. Overall we have shown that we can account for all memory transfers if we attribute O( sBi logM/B si ) memory transfers to each Sweep(i). By induction on i, we can show that at least si insertions have to take place between each Sweep(i). Thus, if we charge the Sweep(i) cost to the last si insertions preceding the Sweep(i), each insertion is charged O( B1 logM/B si ) memory transfers. Given a sequence of operation on an initial empty priority queue, let imax be the largest i for which Sweep(i) takes place. We have simax ≤ N , where N is the number of insertions in the sequence. An insertion can be charged by at most one Sweep(i) for i = 1, . . . , imax , so by the double-exponential growth of si , the number of memory transfers charged to an insertion is

∞ k 1 O logM/B N (3/4) B k=0

=O

1 logM/B N B

=O

N 1 logM/B B B

,

where the last equality follows from the tall cache assumption M = Ω(B 2 ). Finally, we bound the space use of the entire structure. To ensure a space usage linear in N , we create a link i when it is ﬁrst used, i.e., when the ﬁrst Sweep(i) occurs. At that point in time, ci , Ai , vi , Bi , Ki , and Si1 are created. These take up Θ(si ) space combined. At each subsequent Sweep(i) operation, we create the next input buﬀer Sici of size si . As noted above, each Sweep(i) is preceded by at least si insertions, from which an O(N ) space bound follows. To ensure that the entire structure is laid out in consecutive memory locations, the structure is moved to a larger memory area when it has grown by a constant factor. When allocated, the size of the new memory area is chosen such that it will hold the input buﬀers Sij that will be created before the next move. The amortized cost of this is O(1/B) per insertion.

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-17

THEOREM 34.6 Using Θ(M ) fast memory, a sequence of N Insert, DeleteMin, and Delete operations can be performed on an initially empty Funnel Heap using O(N ) space in O( B1 logM/B N B ) amortized memory transfers each.

Brodal and Fagerberg [16] gave a reﬁned analysis for a variant of the Funnel Heap that shows that the structure adapts to diﬀerent usage proﬁles. More precisely, they showed that the ith insertion uses amortized O( B1 logM/B NBi ) memory transfers, where Ni can be deﬁned in any of the following three ways: (a) Ni is the number of elements present in the priority queue when the ith insertion is performed, (b) if the ith inserted element is removed by a DeleteMin operation prior to the jth insertion then Ni = j − i, or (c) Ni is the maximum rank of the ith inserted element during its lifetime in the priority queue, where rank denotes the number of smaller elements in the queue.

34.4.2

Exponential Level Based Priority Queue

While the Funnel Heap is inspired by Mergesort and uses k-mergers as the basic building block, the exponential level priority queue of Arge et al. [5] is somewhat inspired by distribution sorting and uses sorting as a basic building block. Structure

The structure consists of Θ(log log N ) levels whose sizes vary from N to some small size c below a constant threshold ct ; the size of a level corresponds (asymptotically) to the number i−1 of elements that can be stored within it. The i’th level from above has size N (2/3) and for convenience we refer to the levels by their size. Thus the levels from largest to smallest are level N , level N 2/3 , level N 4/9 , . . . , level X 9/4 , level X 3/2 , level X, level X 2/3 , level X 4/9 , . . . , level c9/4 , level c3/2 , and level c. In general, a level can contain any number of elements less than or equal to its size, except level N , which always contains Θ(N ) elements. Intuitively, smaller levels store elements with smaller keys or elements that were more recently inserted. In particular, the minimum key element and the most recently inserted element are always in the smallest (lowest) level c. Both insertions and deletions are initially performed on the smallest level and may propagate up through the levels.

level X 9/4

level X 3/2

level X

up buﬀer of size X 3/2 at most X 1/2 down buﬀers each of size ≈ X up buﬀer of size X at most X 1/3 down buﬀers each of size ≈ X 2/3

level X 2/3

FIGURE 34.11: Levels X 2/3 , X, X 3/2 , and X 9/4 of the priority queue data structure.

© 2005 by Chapman & Hall/CRC

34-18

Handbook of Data Structures and Applications

Elements are stored in a level in a number of buﬀers, which are also used to transfer elements between levels. Level X consists of one up buﬀer uX that can store up to X 1 2/3 X elements, and at most X 1/3 down buﬀers dX 1 , . . . , dX 1/3 each containing between 2 X 2/3 and 2X elements. Thus level X can store up to 3X elements. We refer to the maximum possible number of elements that can be stored in a buﬀer as the size of the buﬀer. Refer to Figure 34.11. Note that the size of a down buﬀer at one level matches the size (up to a constant factor) of the up buﬀer one level down. We maintain three invariants about the relationships between the elements in buﬀers of various levels: Invariant 4 At level X, elements are sorted among the down buﬀers, that is, elements in X X dX i have smaller keys than elements in di+1 , but elements within di are unordered. The element with largest key in each down buﬀer dX i is called a pivot element. Pivot elements mark the boundaries between the ranges of the keys of elements in down buﬀers. Invariant 5 At level X, the elements in the down buﬀers have smaller keys than the elements in the up buﬀer. Invariant 6 The elements in the down buﬀers at level X have smaller keys than the elements in the down buﬀers at the next higher level X 3/2 . The three invariants ensure that the keys of the elements in the down buﬀers get larger as we go from smaller to larger levels of the structure. Furthermore, an order exists between the buﬀers on one level: keys of elements in the up buﬀer are larger than keys of elements in down buﬀers. Therefore, down buﬀers are drawn below up buﬀers on Figure 34.11. However, the keys of the elements in an up buﬀer are unordered relative to the keys of the elements in down buﬀers one level up. Intuitively, up buﬀers store elements that are “on their way up”, that is, they have yet to be resolved as belonging to a particular down buﬀer in the next (or higher) level. Analogously, down buﬀers store elements that are “on their way down”— these elements are by the down buﬀers partitioned into several clusters so that we can quickly ﬁnd the cluster of smallest key elements of size roughly equal to the next level down. In particular, the element with overall smallest key is in the ﬁrst down buﬀer at level c. Layout

The priority queue is laid out in memory such that the levels are stored consecutively from smallest to largest with each level occupying a single region of memory. For level X we reserve space for exactly 3X elements: X for the up buﬀer and 2X 2/3 for each possible down buﬀer. The up buﬀer is stored ﬁrst, followed by the down buﬀers stored in an arbitrary order log log N i but linked together to form an ordered linked list. Thus O( i=03/2 c N (2/3) ) = O(N ) is an upper bound on the total memory used by the priority queue. Operations

To implement the priority queue operations we use two general operations, push and pull. Push inserts X elements into level X 3/2 , and pull removes the X elements with smallest keys from level X 3/2 and returns them in sorted order. An Insert or a DeleteMin is performed simply by performing a push or pull on the smallest level c. Push. To push X elements into level X 3/2 , we ﬁrst sort the X elements cache-obliviously X using O(1 + X B logM/B B ) memory transfers. Next we distribute the elements in the sorted list into the down buﬀers of level X 3/2 by scanning through the list and simultaneously

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-19

visiting the down buﬀers in (linked) order. More precisely, we append elements to the end 3/2 3/2 of the current down buﬀer dX , and advance to the next down buﬀer dX i i+1 as soon as 3/2 . Elements with larger we encounter an element with larger key than the pivot of dX i 3/2 keys than the pivot of the last down buﬀer are inserted in the up buﬀer uX . Scanning through the X elements take O(1 + X B ) memory transfers. Even though we do not scan through every down buﬀer, we might perform at least one memory transfer for each of the 1/2 X 1/2 possible buﬀers. Thus the total cost of distributing the X elements is O( X ) B +X memory transfers. During the distribution of elements a down buﬀer may run full, that is, contain 2X elements. In this case, we split the buﬀer into two down buﬀers each containing X elements using O(1 + X B ) transfers. We place the new buﬀer in any free down buﬀer location for the level and update the linked list accordingly. If the level already has the maximum number X 1/2 of down buﬀers, we remove the last down buﬀer dX by inserting its no more than 2X X 1/2 elements into the up buﬀer using O(1 + X ) memory transfers. Since X elements must have B been inserted since the last time the buﬀer split, the amortized splitting cost per element is O( X1 + B1 ) transfers. In total, the amortized number of memory transfers used on splitting buﬀers while distributing the X elements is O(1 + X B ). If the up buﬀer runs full during the above process, that is, contains more than X 3/2 elements, we recursively push all of these elements into the next level up. Note that after such a recursive push, X 3/2 elements have to be inserted (pushed) into the up buﬀer of level X 3/2 before another recursive push is needed. Overall we can perform a push of X elements from level X into level X 3/2 in O(X 1/2 + X X B logM/B B ) memory transfers amortized, not counting the cost of any recursive push operations; it is easy to see that a push maintains all three invariants. Pull. To describe how to pull the X smallest keys elements from level X 3/2 , we ﬁrst assume that the down buﬀers contain at least 32 X elements. In this case the ﬁrst three 3/2 3/2 3/2 , dX , and dX contain the between 32 X and 6X smallest elements down buﬀers dX 1 2 3 (Invariants 4 and 5). We ﬁnd and remove the X smallest elements simply by sorting these X elements using O(1 + X B logM/B B ) memory transfers. The remaining between X/2 and 5X elements are left in one, two, or three down buﬀers containing between X/2 and 2X elements each. These buﬀers can easily be constructed in O(1 + X B ) transfers. Thus we X log ) memory transfers in total. It is easy to see that Invariants 4–6 are use O(1 + X M/B B B maintained. In the case where the down buﬀers contain fewer than 32 X elements, we ﬁrst pull the X 3/2 elements with smallest keys from the next level up. Because these elements do not 3/2 necessarily have smaller keys than the, say U , elements in the up buﬀer uX , we then sort this up buﬀer and merge the two sorted lists. Then we insert the U elements with largest keys into the up buﬀer, and distribute the remaining between X 3/2 and X 3/2 + 32 X elements into X 1/2 down buﬀers containing between X and X + 32 X 1/2 each (such that the O( X1 + B1 ) amortized down buﬀer split bound is maintained). It is easy to see that this maintains the three invariants. Afterwards, we can ﬁnd the X minimal key elements as above. Note that after a recursive pull, X 3/2 elements have to be deleted (pulled) from the down buﬀers of level X 3/2 before another recursive pull is needed. Note also that a 3/2 pull on level X 3/2 does not aﬀect the number of elements in the up buﬀer uX . Since we distribute elements into the down and up buﬀers after a recursive pull using one sort and one scan of X 3/2 elements, the cost of doing so is dominated by the cost of the recursive pull operation itself. Thus ignoring the cost of recursive pulls, we have shown that a pull X of X elements from level X 3/2 down to level X can be performed in O(1 + X B logM/B B )

© 2005 by Chapman & Hall/CRC

34-20

Handbook of Data Structures and Applications

memory transfers amortized, while maintaining Invariants 4–6. Analysis

To analyze the amortized cost of an Insert or DeleteMin operation, we consider the total number of memory transfers used to perform push and pull operations during N2 operations; to ensure that the structure always consists of O(log log N ) levels and use O(N ) N N 1 space we rebuild it using O( N B logM/B B ) memory transfers (or O( B logM/B B ) transfers N per operation) after every 2 operations [5]. The total cost of N2 such operations is analyzed as follows: We charge a push of X elements from level X up to level X 3/2 to level X. Since X elements have to be inserted in the up buﬀer uX of level X between such pushes, and as elements can only be inserted in uX when elements are inserted (pushed) into level X, O(N/X) pushes are charged to level X during the N2 operations. Similarly, we charge a pull of X elements from level X 3/2 down to level X to level X. Since between such pulls Θ(X) elements have to be deleted from the down buﬀers of level X by pulls on X, O(N/X) pulls are charged to level X during the N2 operations. X Above we argued that a push or pull charged to level X uses O(X 1/2 + X B logM/B B ) X X memory transfers. We can reduce this cost to O( B logM/B B ) by more carefully examining 2 into the costs for diﬀerently sized levels. First consider √ a push or pull of X ≥ B elements1/2 or from level X 3/2 ≥ B 3 . In this case X ≥ X, and we trivially have that O(X + B X X X X 4/3 2 1/2 ≤ X < B , where the X B logM/B B ) = O( B logM/B B ). Next, consider the case B term in the push bound can dominate and we have to analyze the cost of a push more carefully. In this case we are working on a level X 3/2 where B 2 ≤ X 3/2 < B 3 ; there is only one such level. Recall that the X 1/2 cost was from distributing X sorted elements into the less than X 1/2 down buﬀers of level X 3/2 . More precisely, a block of each buﬀer may have to be loaded and written back without transferring a full block of elements into the buﬀer. Assuming M = Ω(B 2 ), we from X 1/2 ≤ B see that a block for each of the buﬀers can ﬁt into fast memory. Consequently, if a fraction of the fast memory is used to keep a partially ﬁlled block of each buﬀer of level X 3/2 (B 2 ≤ X 3/2 ≤ B 3 ) in fast memory at all times, and full blocks are written to disk, the X 1/2 cost would be eliminated. In addition, if all of the levels of size less than B 2 (of total size O(B 2 )) are also kept in fast memory, all transfer costs associated with them would be eliminated. The optimal paging strategy is able to keep the relevant blocks in fast memory at all times and thus eliminates these costs.

Finally, since each of the O(N/X) push and pull operations charged to level X (X > B 2 ) X uses O( X B logM/B B ) amortized memory transfers, the total amortized transfer cost of an Insert or DeleteMin operation in the sequence of N2 such operations is ∞ i 1 N (2/3) N 1 logM/B =O logM/B . O B B B B i=0 THEOREM 34.7 Using Θ(M ) fast memory, N Insert, DeleteMin, and Delete operations can be performed on an initially empty exponential level priority queue using O(N ) space in O( B1 logM/B N B ) amortized memory transfers each.

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34.5

34-21

2d Orthogonal Range Searching

As discussed in Section 34.3, there exist cache-oblivious B-trees that support updates and queries in O(logB N ) memory transfers (e.g. Theorem 34.5); several cache-oblivious Btree variants can also support (one-dimensional) range queries in O(logB N + K B ) memory 2

transfers [11, 12, 18], but at an increased amortized update cost of O(logB N + logB N ) = O(log2B N ) memory transfers (e.g. Theorem 34.4). In this section we discuss cache-oblivious data structures for two-dimensional orthogonal range searching, that is, structures for storing a set of N points in the plane such that the points in a axis-parallel query rectangle can be reported eﬃciently. In Section 34.5.1 we ﬁrst discuss a cache-oblivious version of a kd-tree. This structure uses linear space and answers queries in O( N/B + K B ) memory transfers; this is optimal among linear space structures [22]. It supports updates in O( logBN · logM/B N ) = O(log2B N ) transfers. In Section 34.5.2 we then discuss a cache-oblivious version of a two-dimensional range tree. The structure answers queries in the optimal O(logB N + K B ) memory transfers but uses O(N log2 N ) space. Both structures were ﬁrst described by Agarwal et al. [1].

34.5.1

Cache-Oblivious kd-Tree

Structure

The cache-oblivious kd-tree is simply a normal kd-tree laid out in memory using the van Emde Boas layout. This structure, proposed by Bentley [13], is a binary tree of height O(log N ) with the N points stored in the leaves of the tree. The internal nodes represent a recursive decomposition of the plane by means of axis-orthogonal lines that partition the set of points into two subsets of equal size. On even levels of the tree the dividing lines are horizontal, and on odd levels they are vertical. In this way a rectangular region Rv is naturally associated with each node v, and the nodes on any particular level of the tree partition the plane into disjoint regions. In particular, the regions associated with the leaves represent a partition of the plane into rectangular regions containing one point each. Refer to Figure 34.12.

x2 x1

x1

y3

y1

y2

y4

x4

y7

y1 y8

x2 y3

x3 y4

y5

x4 y6

y7

y5

x5 y8

y9

y6

y10

y2 y9 y10

x3

x5

FIGURE 34.12: kd-tree and the corresponding partitioning.

Query

An orthogonal range query Q on a kd-tree T is answered recursively starting at the root: At a node v we advance the query to a child vc of v if Q intersects the region Rvc associated with vc . At a leaf w we return the point in w if it is contained in Q. A standard

© 2005 by Chapman & Hall/CRC

34-22

Handbook of Data Structures and Applications

argument shows that the number of nodes in T visited answering Q, or equivalently, √ when √ the number of nodes v where Rv intersects Q, is O( N + K); N nodes v are visited where Rv is intersected by the boundary of Q and K nodes u with Ru completely contained in Q [13]. If the kd-tree T is laid out using the van Emde Boas layout, we can bound the number of memory transfers used to answer a query by considering the nodes log B levels above the leaves of T . There are O( N B ) such nodes as the subtree Tv rooted in one such node v contains B leaves. By the standard query argument, the number of these nodes visited by a query is O( N/B + K ). Thus, the number of memory transfers used to visit nodes more B than log B levels above the leaves is O( N/B + K B ). This is also the overall number of memory transfers used to answer a query, since (as argued in Section 34.2.1) the nodes in Tv are contained in O(1) blocks, i.e. any traversal of (any subset of) the nodes in a subtree Tv can be performed in O(1) memory transfers. Construction

In the RAM model, a kd-tree on N points can be constructed recursively in O(N log N ) time; the root dividing line is found using an O(N ) time median algorithm, the points are distributed into two sets according to this line in O(N ) time, and the two subtrees are constructed recursively. Since median ﬁnding and distribution can be performed cacheobliviously in O(N/B) memory transfers [20, 24], a cache-oblivious kd-tree can be constructed in O( N B log N ) memory transfers. Agarwal et al. [1] showed how to construct √ log N = 12 log N levels in O(SortM,B (N )) memory transfers, leading to a recursive construction algorithms using only O(SortM,B (N )) memory transfers. Updates

In the RAM model a kd-tree T can relatively easily be modiﬁed to support deletions in O(log N ) time using global rebuilding. To delete a point from T , we simply ﬁnd the relevant leaf w in O(log N ) time and remove it. We then remove w’s parent and connect w’s grandparent √ to w’s sibling. The resulting tree is no longer a kd-tree but it still answers queries in O( N + T ) time, since the standard argument still applies. To ensure that N is proportional to the actual number of points in T , the structure is completely rebuilt after 2 N 2 deletions. Insertions can be supported in O(log N ) time using the so-called logarithmic method [14], that is, by maintaining log N kd-trees where the i’th kd-tree is either empty or of size 2i and then rebuilding a carefully chosen set of these structures when performing an insertion. Deletes in a cache-oblivious kd-tree is basically done as in the RAM version. However, to still be able to load a subtree Tv with B leaves in O(1) memory transfers and obtain the O( N/B + K B ) query bound, data locality needs to be carefully maintained. By laying out the kd-tree using (a slightly relaxed version of) the exponential layout (Section 34.3.2) rather than the van Emde Boas layout, and by periodically rebuilding parts of this layout, Agarwal et al. [1] showed how to perform a delete in O(logB N ) memory transfers amortized while maintaining locality. They also showed how a slightly modiﬁed version of the logarithmic method and the O(SortM,B (N )) construction algorithms can be used to perform inserts in O( logBN logM/B N ) = O(log2B N ) memory transfers amortized. THEOREM 34.8 There exists a cache-oblivious (kd-tree) data structure for storing a set of N points inthe plane using linear space, such that an orthogonal range query can be answered in O( N/B + K B ) memory transfers. The structure can be constructed cache-

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-23

obliviously in O(SortM,B (N )) memory transfers and supports updates in O( logBN logM/B N ) = O(log2B N ) memory transfers.

34.5.2

Cache-Oblivious Range Tree

The main part of the cache-oblivious range tree structure for answering (four-sided) orthogonal range queries is a structure for answering three-sided queries Q = [xl , xr ] × [yb , ∞), that is, for ﬁnding all points with x-coordinates in the interval [xl , xr ] and y-coordinates above yb . Below we discuss the two structures separately. Three-Sided Queries. Structure

√ √ Consider dividing the plane into N vertical slabs X1 , X2 , . . . , X√N containing N √ points each. Using these slabs we deﬁne 2 N − 1 buckets. A bucket is a rectangular region of the plane that completely spans one or more consecutive slabs and is unbounded in the √ positive y-direction, like a three-sided query. To deﬁne the 2 N − 1 buckets we start with √ √ N active buckets b1 , b2 , . . . , b√N corresponding to the N slabs. The x-range of the slabs deﬁne a natural linear ordering on these buckets. We then imagine sweeping a horizontal sweep line from y = −∞ to y = ∞. Every time the total number of points √ above the sweep line in two adjacent active buckets, bi and bj , in the linear order falls to N , we mark bi and bj as inactive. Then we construct a new active bucket spanning the slabs spanned by bi and bj with a bottom y-boundary equal to the current position of the sweep line. This bucket replaces bi and bj in the The total number of √ √ linear ordering of active buckets. buckets deﬁned in this way is 2 N − 1, since we start with N buckets and the number of active buckets decreases by one every time a new bucket is constructed. Note that the procedure deﬁnes an active y-interval for each bucket in a natural way. Buckets overlap but the set of buckets with active y-intervals containing a given y-value (the buckets active when the sweep line was at that value) are non-overlapping and span all the slabs. This means that the active y-intervals of buckets spanning a given slab are non-overlapping. Refer to Figure 34.13(a). Q

yb

Xi

(a)

0000 1111 1111 0000 00000 11111 0000 1111 0000 1111 0000 1111 00000 11111 0000 1111 0000 1111 0000 1111 00000 11111 0000 1111 0000 1111 0000 1111 00000 11111 0000 0000 1111 000011111 1111 000001111 0000 1111 0000 1111 1111 000011111 00000 11111 1111 000000000

11111 00000 00000 11111 00000 11111 00000 11111 00000 11111 00000 11111 00000 11111 00000 11111 00000 11111 00000 11111 00000 11111 00000 11111 11111 00000

xr

xl

(b)

FIGURE 34.13: (a) Active intervals of buckets spanning slab Xi ; (b) Buckets active at yb . √ After deﬁning the 2 N − 1 buckets, we are ready to present the three-sided query data √ structure; it is deﬁned recursively: It consists of a cache-oblivious B-tree T on the √N √ boundaries deﬁning the N slabs, as well as a cache-oblivious B-tree for each of the N slabs; √ the tree Ti for slab i contains the bottom endpoint of the active√y-intervals of the O( N ) buckets spanning the slab. For each bucket bi we also store the N points in bi in

© 2005 by Chapman & Hall/CRC

34-24

Handbook of Data Structures and Applications

a list Bi sorted by y-coordinate. Finally, recursive structures S1 , S2 , . . . , S2√N −1 are built √ √ on the N points in each of the 2 N − 1 buckets. Layout

The layout of the structure in memory consists of O(N ) memory locations containing T , then T1 , . . . , T√N , and B1 , . . . , B2√N −1 , followed by the recursive structures S1 , . . . , S2√N−1 . √ √ Thus the total space use of the structure is S(N ) ≤ 2 N · S( N ) + O(N ) = O(N log N ). Query

To answer a three-sided query Q, we consider the buckets whose active y-interval contain yb . These buckets are non-overlapping and together they contain all points in Q, since they span all slabs and have bottom y-boundary below yb . We report all points that satisfy Q in each of the buckets with x-range completely between xl and xr . At most two other buckets bl and br —the ones containing xl and xr —can contain points in Q, and we ﬁnd these points recursively by advancing the query to Sl and Sr . Refer to Figure 34.13(b). We ﬁnd the buckets bl and br that need to be queried recursively and report √ the points in the completely spanned buckets as follows. We ﬁrst query T using O(logB N ) memory √ transfers to ﬁnd the slab Xl containing xl . Then we query Tl using another O(logB N ) memory transfers √ to ﬁnd the bucket bl with active y-interval containing yb . We can similarly ﬁnd br in O(logB N ) memory transfers. If bl spans slabs Xl , Xl+1 , . . . , Xm we then query √ Tm+1 with yb in O(logB N ) memory transfers to ﬁnd the active bucket bi to the right of bl completely spanned by Q (if it exists). We report the relevant points in bi by scanning Bi top-down until we encounter a point not contained in Q. If K is the number or reported points, a scan of Bi takes O(1 + KB ) memory transfers. We continue this procedure for each of the completely spanned active √ buckets. By construction, we know that every two adjacent such buckets contain at least N points above yb . First consider the part √ of the √ 2 query that takes place on recursive levels of size N ≥ B , such that N /B ≥ log N ≥ 1. B √ In this case the O(logB N ) overhead in √ ﬁnding and processing two consecutive completely spanned buckets is smaller than √ the O( N /B) memory transfers used to report output points; thus we spend O(logB N + KBi ) memory transfers altogether to answer a query, not counting the recursive queries. Since we perform at most two queries on each level of the recursion (in the active buckets containing xl and xr ), the total cost over all levels log log N i of size at least B 2 is O( i=1 B logB N 1/2 + KBi ) = O(logB N + K B ) transfers. Next consider the case where N = B. In this case the whole level, that is, T , T1 , . . . , T√B and B1 , . . . , B2√B−1 , is stored in O(B) contiguously memory memory locations and can thus be loaded in O(1) memory transfers. Thus the optimal paging strategy can √ ensure that we only spend O(1) transfers on answering a query. In the case where N ≤ B, the level and √ √ all levels of recursion below it occupies O( B log B) = O(B) space. Thus the optimal paging strategy can load it and all relevant lower levels in O(1) memory transfers. This means that overall we answer a query in O(logB N + K that B ) memory transfers, provided √ N and B are such that we have a level of size B 2 (and thus of size B and B); when √ answering a query on a level of size between B and B 2 we cannot charge the O(logB N ) cost of visiting two active consecutive buckets to the (< B) points found in the two buckets. Agarwal et al. [1] showed how to guarantee that we have a level of size B 2 by assuming that d B = 22 for some non-negative integer d. Using a somewhat diﬀerent construction, Arge et al. [6] showed how to remove this assumption.

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

34-25

There exists a cache-oblivious data structure for storing N points in the plane using O(N log N ) space, such that a three-sided orthogonal range query can be answered in O(logB N + K B ) memory transfers. THEOREM 34.9

Four-sided queries.

Using the structure for three-sided queries, we can construct a cache-oblivious range tree structure for four-sided orthogonal range queries in a standard way. The structure consists of a cache-oblivious B-tree T on the N points sorted by x-coordinates. With each internal node v we associate a secondary structure for answering three-sided queries on the points stored in the leaves of the subtree rooted at v: If v is the left child of its parent then we have a three-sided structure for answering queries with the opening to the right, and if v is the right child then we have a three-sided structure for answering queries with the opening to the left. The secondary structures on each level of the tree use O(N log N ) space, for a total space usage of O(N log2 N ). To answer an orthogonal range query Q, we search down T using O(logB N ) memory transfers to ﬁnd the ﬁrst node v where the left and right x-coordinate of Q are contained in diﬀerent children of v. Then we query the right opening secondary structure of the left child of v, and the left opening secondary structure of the right child of v, using O(logB N + K B) memory transfers. Refer to Figure 34.14. It is easy to see that this correctly reports all K points in Q.

v

111 000 00 11 111 11 000 00 x FIGURE 34.14: Answering a four-sided query in v using two three-sided queries in v’s children.

There exists a cache-oblivious data structure for storing N points in the plane using O(N log2 N ) space, such that an orthogonal range query can be answered in O(logB N + K B ) memory transfers.

THEOREM 34.10

© 2005 by Chapman & Hall/CRC

34-26

Handbook of Data Structures and Applications

Acknowledgments Lars Arge was supported in part by the National Science Foundation through ITR grant EIA–0112849, RI grant EIA–9972879, CAREER grant CCR–9984099, and U.S.–Germany Cooperative Research Program grant INT–0129182. Gerth Stølting Brodal was supported by the Carlsberg Foundation (contract number ANS-0257/20), BRICS (Basic Research in Computer Science, www.brics.dk, funded by the Danish National Research Foundation), and the Future and Emerging Technologies programme of the EU under contract number IST-1999-14186 (ALCOM-FT). Rolf Fagerberg was supported by BRICS (Basic Research in Computer Science, www. brics.dk, funded by the Danish National Research Foundation), and the Future and Emerging Technologies programme of the EU under contract number IST-1999-14186 (ALCOMFT). Part of this work was done while at University of Aarhus.

References [1] P. K. Agarwal, L. Arge, A. Danner, and B. Holland-Minkley. Cache-oblivious data structures for orthogonal range searching. In Proc. 19th ACM Symposium on Computational Geometry, pages 237–245. ACM Press, 2003. [2] A. Aggarwal and J. S. Vitter. The input/output complexity of sorting and related problems. Communications of the ACM, 31(9):1116–1127, Sept. 1988. [3] A. Andersson and T. W. Lai. Fast updating of well-balanced trees. In Proc. 2nd Scandinavian Workshop on Algorithm Theory, volume 447 of Lecture Notes in Computer Science, pages 111–121. Springer, 1990. [4] L. Arge. External memory data structures. In J. Abello, P. M. Pardalos, and M. G. C. Resende, editors, Handbook of Massive Data Sets, pages 313–358. Kluwer Academic Publishers, 2002. [5] L. Arge, M. Bender, E. Demaine, B. Holland-Minkley, and J. I. Munro. Cache-oblivious priority-queue and graph algorithms. In Proc. 34th ACM Symposium on Theory of Computation, pages 268–276. ACM Press, 2002. [6] L. Arge, G. S. Brodal, and R. Fagerberg. Improved cache-oblivious two-dimensional orthogonal range searching. Unpublished results, 2004. [7] R. Bayer and E. McCreight. Organization and maintenance of large ordered indexes. Acta Informatica, 1:173–189, 1972. [8] M. Bender, E. Demaine, and M. Farach-Colton. Eﬃcient tree layout in a multilevel memory hierarchy. In Proc. 10th Annual European Symposium on Algorithms, volume 2461 of Lecture Notes in Computer Science, pages 165–173. Springer, 2002. Full version at http://www.cs.sunysb.edu/∼bender/pub/treelayout-full.ps. [9] M. A. Bender, G. S. Brodal, R. Fagerberg, D. Ge, S. He, H. Hu, J. Iacono, and A. L´opez-Ortiz. The cost of cache-oblivious searching. In Proc. 44th Annual IEEE Symposium on Foundations of Computer Science, pages 271–282. IEEE Computer Society Press, 2003. [10] M. A. Bender, R. Cole, and R. Raman. Exponential structures for cache-oblivious algorithms. In Proc. 29th International Colloquium on Automata, Languages, and Programming, vol. 2380, Lecture Notes in Computer Science, pages 195–207. Springer, 2002. [11] M. A. Bender, E. D. Demaine, and M. Farach-Colton. Cache-oblivious B-trees. In Proc. 41st Annual IEEE Symposium on Foundations of Computer Science, pages 339–409. IEEE Computer Society Press, 2000. [12] M. A. Bender, Z. Duan, J. Iacono, and J. Wu. A locality-preserving cache-oblivious

© 2005 by Chapman & Hall/CRC

Cache-Oblivious Data Structures

[13] [14] [15]

[16]

[17] [18]

[19]

[20]

[21]

[22]

[23]

[24] [25]

[26] [27]

34-27

dynamic dictionary. In Proc. 13th Annual ACM-SIAM Symposium on Discrete Algorithms, pages 29–38. SIAM, 2002. J. L. Bentley. Multidimensional binary search trees used for associative searching. Communication of the ACM, 18:509–517, 1975. J. L. Bentley. Decomposable searching problems. Information Processing Letters, 8(5):244–251, 1979. G. S. Brodal and R. Fagerberg. Cache oblivious distribution sweeping. In Proc. 29th International Colloquium on Automata, Languages, and Programming, vol. 2380, Lecture Notes in Computer Science, pages 426–438. Springer, 2002. G. S. Brodal and R. Fagerberg. Funnel heap - a cache oblivious priority queue. In Proc. 13th International Symposium on Algorithms and Computation, volume 2518 of Lecture Notes in Computer Science, pages 219–228. Springer, 2002. G. S. Brodal and R. Fagerberg. On the limits of cache-obliviousness. In Proc. 35th ACM Symposium on Theory of Computation, pages 307–315. ACM Press, 2003. G. S. Brodal, R. Fagerberg, and R. Jacob. Cache oblivious search trees via binary trees of small height. In Proc. 13th Annual ACM-SIAM Symposium on Discrete Algorithms, pages 39–48. SIAM, 2002. G. S. Brodal, R. Fagerberg, and K. Vinther. Engineering a cache-oblivious sorting algorithm. In Proc. 6th Workshop on Algorithm Engineering and Experiments, 2004. M. Frigo, C. E. Leiserson, H. Prokop, and S. Ramachandran. Cache-oblivious algorithms. In Proc. 40th Annual IEEE Symposium on Foundations of Computer Science, pages 285–298. IEEE Computer Society Press, 1999. A. Itai, A. G. Konheim, and M. Rodeh. A sparse table implementation of priority queues. In Proc. 8th International Colloquium on Automata, Languages, and Programming, volume 115 of Lecture Notes in Computer Science, pages 417–431. Springer, 1981. K. V. R. Kanth and A. K. Singh. Optimal dynamic range searching in non-replicating index structures. In Proc. International Conference on Database Theory, volume 1540 of Lecture Notes in Computer Science, pages 257–276. Springer, 1999. R. E. Ladner, R. Fortna, and B.-H. Nguyen. A comparison of cache aware and cache oblivious static search trees using program instrumentation. In Experimental Algorith-

mics, From Algorithm Design to Robust and Eﬃcient Software (Dagstuhl seminar, September 2000), volume 2547 of Lecture Notes in Computer Science, pages 78–92. Springer, 2002. H. Prokop. Cache-oblivious algorithms. Master’s thesis, Massachusetts Institute of Technology, Cambridge, MA, June 1999. N. Rahman, R. Cole, and R. Raman. Optimized predecessor data structures for internal memory. In Proc. 3rd Workshop on Algorithm Engineering, volume 2141 of Lecture Notes in Computer Science, pages 67–78. Springer, 2001. P. van Emde Boas. Preserving order in a forest in less than logarithmic time and linear space. Information Processing Letters, 6:80–82, 1977. J. S. Vitter. External memory algorithms and data structures: Dealing with massive data. ACM Computing Surveys, 33(2):209–271, June 2001.

© 2005 by Chapman & Hall/CRC

35 Dynamic Trees 35.1 35.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Linking and Cutting Trees . . . . . . . . . . . . . . . . . . . . . . . .

35-1 35-2

Using Operations on Vertex-Disjoint Paths • Implementing Operations on Vertex-Disjoint Paths

Camil Demetrescu Universit` a di Roma

Irene Finocchi Universit` a di Roma

Giuseppe F. Italiano Universit` a di Roma

35.1

35.3

Topology Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Construction

35.4

•

Updates

•

35-6

Applications

Top Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-10 Updates

•

Representation and Applications

35.5

ET Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-14

35.6 35.7

Reachability Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-16 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-17

Updates

•

Applications

Introduction

In this chapter we consider the problem of maintaining properties of a collection of vertexdisjoint trees that change over time as edges are added or deleted. The trees can be rooted or free, and vertices and edges may be associated with real-valued costs that may change as well. A straightforward solution would be to store explicitly with each vertex its parent and cost, if any: with this representation each update would cost only O(1) time, but answering queries would be typically proportional to the size or to the depth of the tree, which may be linear in the worst case. By representing the structure of the trees implicitly, one can reduce the query time while slightly increasing the update time. The typical achieved bounds are logarithmic in the number of vertices of the forest, either in the worst-case or amortized over a sequence of operations. While the basic tree update operations are edge insertions, edge deletions, and possibly vertex/edge cost changes, many properties of dynamically changing trees have been considered in the literature. The basic query operation is tree membership: while the forest of trees is dynamically changing, we would like to know at any time which tree contains a given vertex, or whether two vertices are in the same tree. Dynamic tree membership is a special case of dynamic connectivity in undirected graphs, and indeed in Chapter 36 we will see that some of the data structures developed here for trees are used to solve the more general problem on graphs. We remark that, if only edge insertions are allowed, the tree membership problem is equivalent to maintaining disjoint sets under union operations and thus the well known set union data structures can solve it [17]. In this chapter we will instead consider the problem in a fully dynamic setting, in which also edge deletions are allowed, and present eﬃcient data structures such as the linking and cutting trees of Sleator and Tarjan [15] and the topology trees of Frederickson [6].

35-1

© 2005 by Chapman & Hall/CRC

35-2

Handbook of Data Structures and Applications

Other properties that have been considered are ﬁnding the least common ancestor of two vertices, the center, the median, or the diameter of a tree [1, 2, 15]. When costs are associated either to vertices or to edges, one could also ask what is the minimum or maximum cost in a given path. A variant of topology trees, known as top trees [1], are especially well suited at maintaining this kind of path information. ET trees, ﬁrst introduced in [18] and much used in [10], allow it to deal easily with forests whose vertices are associated with weighted or unweighted keys, supporting, e.g., minkey queries, which require to return a key of minimum weight in the tree that contains a given vertex. Reachability trees, introduced by Even and Shiloach in [5], support instead distance and shortest path queries and have been widely used to solve dynamic path problems on directed graphs (see, e.g., [10, 12]).

35.2

Linking and Cutting Trees

In this section we present a data structure due to Sleator and Tarjan [15] useful to maintain a collection of rooted trees, each of whose vertices has a real-valued cost, under an arbitrary sequence of the following operations: • • • •

maketree(v): initialize a new tree consisting of a single vertex v with cost zero. findroot(v): return the root of the tree containing vertex v. findcost(v): return a vertex of minimum cost in the path from v to findroot(v). addcost(v, δ): add the real number δ to the cost of every vertex in the path from v to findroot(v). • link(v, w): merge the trees containing vertices v and w by inserting edge (v, w). This operation assumes that v and w are in diﬀerent trees and that v is a tree root. • cut(v): delete the edge from v to its parent, thus splitting the tree containing vertex v into two trees. This operation assumes that v is not a tree root. The data structure of Sleator and Tarjan is known as linking and cutting trees and supports all the above operations in O(log n) time, by representing the structure of the trees implicitly. Other operations that can be supported within the same time bound are changing the root of a tree, ﬁnding the parent of a vertex, and ﬁnding the least common ancestor of two vertices. In particular, the possibility of making a given vertex v root of a tree makes the data structure powerful enough to handle problems requiring linking and cutting of free (i.e., unrooted) trees. Furthermore, the same time bounds can be obtained when real costs are associated with edges rather than with vertices. The rest of this section is organized as follows. In Section 35.2.1 we show how to implement the operations given above using simpler primitives deﬁned on paths (rather than on trees), and in Section 35.2.2 we describe the implementation of these primitives on paths. For simplicity, we only describe a solution that achieves O(log n) amortized (rather than worst-case) time per operation. Details of all these results may be found in [15].

35.2.1

Using Operations on Vertex-Disjoint Paths

In this section we show the reduction between the operations on trees and a suitable collection of operations on vertex-disjoint paths. Assume we know how to perform the following operations: • makepath(v): initialize a new path consisting of a single vertex v with cost zero;

© 2005 by Chapman & Hall/CRC

Dynamic Trees

35-3

• • • • •

findpath(v): return the path containing vertex v; findpathtail(p): return the tail (last vertex) of path p; findpathcost(p): return a vertex of minimum cost in path p; addpathcost(p, δ): add the real value δ to the cost of every vertex in path p; join(p, v, q): merge path p, vertex v, and path q into a single path by inserting one edge from the tail of p to v, and one edge from v to the head (ﬁrst vertex) of q, and return the new path. Either p or q can be empty; • split(v): divide the path containing vertex v into at most three paths by deleting the edges incident to v. Return the two new paths p (containing all the vertices before v) and q (containing all the vertices after v). Again, either p or q can be empty. In order to solve the problem of linking and cutting trees, we partition each tree into a set of vertex disjoint paths. Each tree operation will be deﬁned in terms of one or more path operations. This partition is deﬁned by allowing each tree edge to be either solid or dashed and by maintaining the invariant that at most one solid edge enters each vertex (we consider an edge oriented from a child to its parent). Removing dashed edges therefore partitions the tree into vertex-disjoint solid paths. Dashed edges are represented implicitly: we associate with each path p its successor , that is the vertex entered by the dashed edge leaving the tail of p. If the tail of p is a root, successor(p) is null . Each path will be represented by a vertex on it (an empty path being represented by null ). In order to convert dashed edges to solid (and vice-versa) we will be using the following operation: • expose(v): make the tree path from v to findroot(v) solid. This is done by converting dashed edges in the path to solid, and solid edges incident to the path to dashed. Return the resulting solid path. Now we describe how to implement tree operations in terms of path operations: • • • • •

a maketree(v) is done by a makepath(v) followed by setting successor(v) to null ; a findroot(v) is a findpathtail(expose(v)); a findcost(v) is a findpathcost(expose(v)); an addcost(v, δ) is an addpathcost(expose(v), δ); a link(v, w) is implemented by performing ﬁrst an expose(v) that makes v into a one-vertex solid path, then an expose(w) that makes the path from w to its root solid, and then by joining these two solid paths: in short, this means assigning null to successor(join(null,expose(v),expose(w))); • to perform a cut(v), we ﬁrst perform an expose(v), which leaves v with no entering solid edge. We then perform a split(v), which returns paths p and q: since v is the head of its solid path and is not a tree root, p will be empty, while q will be non-empty. We now complete the operation by setting both successor(v) and successor(q) to null .

To conclude, we need to show how to perform an expose, i.e., how to convert all the dashed edges in the path from a given vertex to the tree root to solid maintaining the invariant that at most one solid edge enters each vertex. Let x be a vertex of this path such that the edge from x to its parent w is dashed (and thus w = successor(x)). What we would like to do is to convert edge (x, w) into solid, and to convert the solid edge previously entering w (if any) into dashed. We call this operation a splice. The pseudocode in Figure 35.1 implements expose(v) as a sequence of splices. Path p, initialized to be

© 2005 by Chapman & Hall/CRC

35-4

Handbook of Data Structures and Applications

function expose (v) 1. begin 2. p ← null 3. while v = null do 4. w ← successor(findpath(v)) 5. [q, r] ← split(v) 6. if q = null then successor(q)← v 7. p ← join(p, v, r) 8. v←w 9. successor(p)← null 10. end

FIGURE 35.1: Implementation of expose(v). empty, at the end of the execution will contain the solid path from v to findroot(v). Each iteration of the while loop performs a splice at v by converting to solid the edge from the tail of p to v (if p = null ) and to dashed the edge from the tail of q to v (if q = null ). A step-by-step execution of expose on a running example is shown in Figure 35.2. From the description above, each tree operation takes O(1) path operations and at most one expose. Each splice within an expose requires O(1) path operations. Hence, in order to compute the running time, we need ﬁrst to count the number of splices per expose and then to show how to implement the path operations. With respect to the former point, Sleator and Tarjan prove that a sequence of m tree operations causes O(m log n) splices, and thus O(log n) splices amortized per expose. THEOREM 35.1 [15] Any sequence of m tree operations (including n maketree) requires O(m) path operations and at most m expose. The exposes can be implemented with O(m log n) splices, each of which requires O(1) path operations.

35.2.2

Implementing Operations on Vertex-Disjoint Paths

We now describe how to represent solid paths in order to implement eﬃciently tree operations. Each solid path is represented by a binary tree whose nodes in symmetric order are the vertices in the path; each node x contains pointers to its parent p(x), to its left child l(x), and to its right child r(x). We call the tree representing a solid path a solid tree. The vertex representing a solid path is the root of the corresponding solid tree, and thus the root of the solid tree contains a pointer to the successor of the path in the dynamic tree. Vertex costs are represented as follows. Let cost(x) be the cost of vertex x, and let mincost(x) be the minimum cost among the descendants of x in its solid tree. Rather than storing these two values, in order to implement addcost operations eﬃciently, we store at x the incremental quantities ∆cost(x) and ∆min(x) deﬁned as follows: ∆cost(x) = cost(x) − mincost(x) mincost(x) ∆min(x) = mincost(x) − mincost(p(x))

if x is a solid tree root otherwise

An example of this representation is given in Figure 35.3. Given ∆cost and ∆min, we can compute mincost(x) by summing up ∆min for all vertices in the solid tree path from the root to x, and cost(x) as mincost(x) + ∆cost(x). Moreover, note that ∆cost(x) = 0 if and only if x is a minimum cost node in the subtree rooted at x. If this is not the case and the minimum cost node is in the right subtree, then ∆min(r(x)) = 0; otherwise ∆min(l(x)) = 0. With this representation, rotations can be still implemented in O(1) time. The path operations can be carried out as follows:

© 2005 by Chapman & Hall/CRC

Dynamic Trees

35-5

w

r

v

q

v

(a)

(b) w v

w

r

q

v

q

p

p

(c)

(d)

(e)

(f)

v q

p

FIGURE 35.2: Eﬀect of expose(v). (a) The original decomposition into solid paths; (b–e) vertices and paths after the execution of line 5 in the four consecutive iterations of the while loop; (f) the decomposition into solid paths after expose(v). • makepath(v): initialize a binary tree of one vertex v with ∆min(v) = 0 and ∆cost(v) = 0. • findpath(v): starting from v, follow parent pointers in v’s solid tree until a node with no parent is found. Return this node. • findpathtail(p): assuming that p is the root of a solid tree, follow right pointers and return the rightmost node in the solid tree. • findpathcost(p): initialize v to p and repeat the following step until ∆cost(v) = 0: if v has a right child and ∆min(r(v)) = 0, replace v by r(v); otherwise, replace

© 2005 by Chapman & Hall/CRC

35-6

Handbook of Data Structures and Applications

2 f

g 5

4 e

h 1

3 d

i 7

8 c

j 3

6 b

k 6

4 a

l 8

5,1 g 6,2 b 4,4 a

4,1 b

7,1 i

3,2 d

8,8 c

4,1 g

1,1 h

6,3 k

2,2 f 3,3 j

8,8 l

0,2 a

(b)

(a)

1,0 d

0,6 c

4,4 e

6,0 i 0,0 h

3,2 k

0,0 f 0,0 j

0,5 l

0,2 e (c)

FIGURE 35.3: Representing solid paths with binary trees. (a) A solid path and its vertex costs; (b) solid tree with explicit costs (the bold value is cost(v) and the italic value is mincost(v)); (c) corresponding solid tree with incremental costs (the bold value is ∆cost(v) and the italic value is ∆min(v)). v by l(v). At the end, return v. • addpathcost(p, δ): add δ to ∆min(p). • join(p, v, q): join the solid trees with roots p, v and q. • split(v): split the solid tree containing node v. We observe that operations findpath, findpathtail and findpathcost are essentially a look up in a search tree, while split and join are exactly the same operations on search trees. If we represent solid paths by means of balanced search trees, the time per path operation becomes O(log n), and by Theorem 35.1 any sequence of m tree operations can be supported in O(m(log n)2 ) time. Using self-adjusting binary search trees [16] to represent solid paths, together with a more careful analysis, yields a better bound: THEOREM 35.2 O(m log n) time.

[15] Any sequence of m tree operations (including n maketree) requires

Insights on the use of self-adjusting binary search trees in the implementation of path operations are given in Chapter 12. Using biased search trees [3], the O(log n) amortized bound given in Theorem 35.2 can be made worst-case. Details can be found in [15].

35.3

Topology Trees

Topology trees have been introduced by Frederickson [6] in order to maintain information about trees subject to insertions and deletions of edges and answer eﬃciently, e.g., tree membership queries. Similarly to the linking and cutting trees of Sleator and Tarjan [15] that we have discussed in Section 35.2, topology trees follow the idea of partitioning a tree into a set of vertex-disjoint paths. However, they are very diﬀerent in how this partition is chosen, and in the data structures used to represent the paths inside the partition. Indeed, Sleator and Tarjan [15] use a simple partition of the trees based upon a careful choice of sophisticated data structures to represent paths. On the contrary, Frederickson [6] uses a more sophisticated partition that is based upon the topology of the tree; this implies more complicated algorithms but simpler data structures for representing paths. The basic idea is to partition the tree into a suitable collection of subtrees, called clusters,

© 2005 by Chapman & Hall/CRC

Dynamic Trees

35-7

3

1 12

10 2

9

13 6

7

11

4

5 14

8

FIGURE 35.4: A restricted partition of order 2 of a tree T . and to implement updates such that only a small number of such clusters is involved. The decomposition deﬁned by the clusters is applied recursively to get faster update and query times. In order to illustrate how such a recursive decomposition is computed, we assume that T has maximum vertex degree 3: this is without loss of generality, since a standard transformation can be applied if this is not the case [9]. Namely, each vertex v of degree d > 3 is replaced by new vertices v0 , . . . , vd−1 ; for each neighbor ui of vertex v, 0 ≤ i ≤ d − 1, edge (v, ui ) is replaced by (vi , ui ), and a new edge (vi , vi+1 ) is created if i < d − 1. Given a tree T of maximum degree 3, a cluster is any connected subgraph of T . The cardinality and the external degree of a cluster are the number of its vertices and the number of tree edges incident to it, respectively. We now deﬁne a partition of the vertices of T such that the resulting clusters possess certain useful properties. Let z be a positive integer. DEFINITION 35.1 A restricted partition of order z w.r.t. T is a partition of the vertex set V into clusters of degree at most 3 such that: (1) Each cluster of external degree 3 has cardinality 1. (2) Each cluster of external degree < 3 has cardinality at most z. (3) No two adjacent clusters can be combined and still satisfy the above.

A restricted partition of order 2 of a tree T is shown in Figure 35.4. There can be several restricted partitions for a given tree T , based upon diﬀerent choices of the vertices to be unioned. For instance, vertex 8 in Figure 35.4 could be unioned with 7, instead of 11, and the partition would still be valid. It can be proved that a restricted partition of order z has Θ(n/z) clusters [6, 7]. We now show that the partition deﬁned above can be applied recursively for Θ(log n) levels. Such a recursive application yields a restricted multilevel partition [6, 7], from which the topology tree can be ﬁnally obtained. DEFINITION 35.2 A topology tree is a hierarchical representation of a tree T such that each level of the topology tree partitions the vertices of T into clusters. Clusters at level 0 contain one vertex each. Clusters at level ≥ 1 form a restricted partition of order 2 of the vertices of the tree T obtained by shrinking each cluster at level − 1 into a single vertex.

© 2005 by Chapman & Hall/CRC

35-8

Handbook of Data Structures and Applications b

a

1

9

Multilevel restricted partition

2

i

6 d

7 j

m

n

g

12

10

f

3

4

l

13

5 c

11

h

14

k

e

8

n

Topology tree

l

m j

i

a 1

b

9 10

e

g

f

9

3

d

2 12

2

11

8

k h

6

4

7

6

4

13

7

6

4

13

c 14

5

FIGURE 35.5: Restricted multilevel partition and corresponding topology tree. As shown in Figure 35.5, level l of the restricted multilevel partition is obtained by computing a restricted partition of order 2 with respect to the tree resulting from viewing each cluster at level l − 1 as a single vertex. Figure 35.5 also shows the topology tree corresponding to the restricted multilevel partition. Call any cluster of level l − 1 matched if it is unioned with another cluster to give a cluster of level l: unmatched clusters have a unique child in the topology tree. It can be proved that, for any level l > 0 of a restricted multilevel partition, the number of matched clusters at level l − 1 is at least 1/3 of the total number of vertex clusters at level l − 1. Since each pair of matched clusters is replaced by their union at level l, the number of clusters at level l is at most 5/6 the number of clusters at level l − 1. The number of levels of the topology tree is therefore Θ(log n).

35.3.1

Construction

It is suﬃcient to show how to compute a restricted partition: the levels of the topology tree can be then built in a bottom up fashion by repeatedly applying the clustering algorithm as suggested by Deﬁnition 35.2. Because of property (3) in Deﬁnition 35.1, it is natural to compute a restricted partition according to a locally greedy heuristic, which does not always obtain the minimum number of clusters, but has the advantage of requiring only local adjustments during updates. The tree is ﬁrst rooted at any vertex of degree 1 and the procedure cluster is called with the root as argument. At a generic step, procedure cluster(v) works as follows. It initializes the cluster C(v) containing vertex v as C(v) = {v}. Then,

© 2005 by Chapman & Hall/CRC

Dynamic Trees

35-9

for each child w of v, it recursively calls cluster(w), that computes C(w): if C(w) can be unioned with C(v) without violating the size and degree bounds in Deﬁnition 35.1, C(v) is updated as C(v) ∪ C(w), otherwise C(w) is output as a cluster. As an example, the restricted partition shown in Figure 35.4 is obtained by running procedure cluster on the tree rooted at vertex 7.

35.3.2

Updates

We ﬁrst describe how to update the clusters of a restricted partition when an edge e is inserted in or deleted from the dynamic tree T : this operation is the crux of the update of the entire topology tree. Update of a restricted partition. We start from edge deletion. First, removing an edge e splits T into two trees, say T1 and T2 , which inherit all of the clusters of T , possibly with the following exceptions. 1. Edge e is entirely contained in a cluster: this cluster is no longer connected and therefore must be split. After the split, we must check whether each of the two resulting clusters is adjacent to a cluster of tree degree at most 2, and if these two adjacent clusters together have cardinality ≤ 2. If so, we combine these two clusters in order to maintain condition (3). 2. Edge e is between two clusters: in this case no split is needed. However, since the tree degree of the clusters containing the endpoints of e has been decreased, we must check if each cluster should be combined with an adjacent cluster, again because of condition (3). Similar local manipulations can be applied to restore invariants (1) - (3) in Deﬁnition 35.1 in case of edge insertions. We now come to the update of the topology tree. Update of the topology tree. Each level can be updated upon insertions and deletions of edges in tree T by applying few locally greedy adjustments similar to the ones described above. In particular, a constant number of basic clusters (corresponding to leaves in the topology tree) are examined: the changes in these basic clusters percolate up in the topology tree, possibly causing vertex clusters to be regrouped in diﬀerent ways. The fact that only a constant amount of work has to be done on O(log n) topology tree nodes implies a logarithmic bound on the update time. [6, 7] The update of a topology tree because of an edge insertion or deletion in the dynamic tree T can be supported in O(log n) time, where n is the number of vertices of T .

THEOREM 35.3

35.3.3

Applications

In the fully dynamic tree membership problem we would like to maintain a forest of unrooted trees under insertion of edges (which merge two trees into one), deletion of edges (which split one tree into two), and membership queries. Typical queries require to return the name of the tree containing a given vertex, or ask whether two vertices are in a same tree. Most of the solutions presented in the literature root each tree arbitrarily at one of its vertices; by keeping extra information at the root (such as the name of the tree), membership queries are equivalent to ﬁnding the tree root a vertex.

© 2005 by Chapman & Hall/CRC

35-10

Handbook of Data Structures and Applications

The dynamic tree clustering techniques of Frederickson have also found wide application in dynamic graph algorithms. Namely, topology trees have been originally designed in order to solve the fully dynamic minimum spanning tree problem [6], in which we wish to maintain a minimum spanning tree of a dynamic weighted undirected graph upon insertions/deletions of edges and edge cost changes. Let G = (V, E) be the dynamic graph and let S be a designated spanning tree of G. As G is updated, edges in the spanning tree S may change: e.g., if the cost of an edge e is increased in G and e is in the spanning tree, we need to check for the existence of a replacement edge e of smaller cost, and swap e with e in S. The clustering approach proposed in [6, 7] consists of partitioning the vertex set V into subtrees connected in S, so that each subtree is only adjacent to a few other subtrees. A topology tree is used for representing this recursive partition of the spanning tree S. A generalization of topology trees, called 2-dimensional topology trees, is also formed from pairs of nodes in the topology tree in order to maintain information about the edges in E \ S [6]. Fully dynamic algorithms based only on a single level of clustering obtain typically time bounds of the order of O(m2/3 ) (see for instance [8, 14]), where m is the number of edges of the graph. When the partition is applied recursively, better O(m1/2 ) time bounds can be achieved by using 2-dimensional topology trees: we refer the interested reader to [6, 7] for details. As we will see in Section 36.5.2, Frederickson’s algorithm is not optimal: the fully dynamic minimum spanning tree problem has been later solved in polylogarithmic time [11]. With the same technique, an O(m1/2 ) time bound can be obtained also for fully dynamic connectivity and 2-edge connectivity [6, 7]. For instance, [7] shows that edges and vertices can be inserted to or deleted from an undirected graph in O(m1/2 ) time, and a query as to whether two vertices are in the same 2-edge-connected component can be answered in O(log n) time, n being the number of vertices. This result is based on the use of ambivalent data structures [7], a reﬁnement of the clustering technique in which edges can belong to multiple groups, only one of which is actually selected depending on the topology of the given spanning tree.

35.4

Top Trees

Top trees have been introduced by Alstrup et al. [1] to maintain eﬃciently information about paths in trees, such as, e.g., the maximum weight on the path between any pair of vertices in a tree. The basic idea is taken from Frederickson’s topology trees, but instead of partitioning vertices, top trees work by partitioning edges: the same vertex can then appear in more than one cluster. Top trees can be also seen as a natural generalization of standard balanced binary trees over dynamic collections of lists that may be concatenated and split, where each node of the balanced binary tree represents a segment of a list. As we will see, in the terminology of top trees this is just a special case of a cluster. We follow here the presentation in [2]. Similarly to [6, 7], a cluster is a connected subtree of the dynamic tree T , with the additional constraint that at most two vertices, called boundary vertices, have edges out of the subtree. We will denote the boundary of a cluster C as δC. If the boundary contains two vertices u and v, we call cluster path of C the unique path between u and v in T and we denote it as π(C). If |δC < 2|, then π(C) = ∅. Two clusters C1 and C2 are called neighbors if their intersection contains exactly one vertex: since clusters are connected and have no edges in common, the intersection vertex must be in δC1 ∩ δC2 . It is also possible to deﬁne a boundary δT , consisting of one or two vertices, for the entire tree T : we will call such vertices, if any, external boundary vertices. If external boundary vertices are deﬁned, we have to extend the notion of boundary of a cluster: namely, if a cluster C contains an external boundary vertex v, then v ∈ δC even if

© 2005 by Chapman & Hall/CRC

Dynamic Trees

35-11

level 0 clusters

level 1 clusters

level 2 clusters

level 3 clusters

level 4

top tree

3

2

1

0

FIGURE 35.6: Clusters and top tree of a tree T . Edges with the same color, thickness, and pattern are in the same cluster. Boundary vertices are grey. External boundary vertices are squared. v has no edge out of C. DEFINITION 35.3

A top tree T over a pair (T, δT ) is a binary tree such that:

• The leaves of T are the edges of T .

© 2005 by Chapman & Hall/CRC

35-12

Handbook of Data Structures and Applications

• The internal nodes of T are clusters of T . • The subtree represented by each internal node is the union of the subtrees represented by its two children, which must be neighbors. • The root of T represents the entire tree T . • The height of T is O(log n), where n is the number of vertices of T . A tree with a single node has an empty top tree. Figure 35.6 shows the clusters at diﬀerent levels of the recursive partition and the corresponding top tree. Note that a vertex can appear in many clusters, as many as Θ(n) in the worst case. However, it can be a non-boundary vertex only in O(log n) clusters. Indeed, for each vertex v which is neither an external boundary vertex nor a leaf in T , there exists a unique cluster C with children A and B such that v ∈ δA, v ∈ δB, and v ∈ δC. Then v is non-boundary vertex only in cluster C and in all its ancestors in the top tree. A locally greedy approach similar to the one described in Section 35.3.1 for topology trees can be used to build a top tree. The only modiﬁcations require to reason in terms of edges, instead of vertices, and to check the condition on the cardinality of the boundary before unioning any two neighboring clusters.

35.4.1

Updates

Given a dynamic forest, top trees over the trees of the forest are maintained under the following operations: • link(u,v), where u and v are in diﬀerent trees Tu and Tv of the forest: link trees Tu and Tv by adding edge (u, v); • cut(e): remove edge e from the forest; • expose(u,v), where u and v are in the same tree T of the forest: make u and v the external boundary vertices of T and return the new root cluster of the top tree over T . Top trees can be maintained under these operations by making use of two basic merge and split primitives: • merge: it takes two top trees whose roots are neighbor clusters and joins them to form a unique top tree; • split: this is the reverse operation, deleting the root of a given top tree. The implementation of update operations starts with a sequence of Split of all ancestor clusters of edges whose boundary changes and ﬁnishes with a sequence of Merge. In case of insertion and deletions, since an end-point v of an edge has to be already boundary vertex of the edge if v is not a leaf, an update can change the boundary of at most two edges, excluding the edge being inserted/deleted. From [1, 2, 6] we have: THEOREM 35.4 [1, 2] For a dynamic forest we can maintain top trees of height O(log n) supporting each link, cut, and expose operation with a sequence of O(log n) split and merge. The sequence itself is identiﬁed in O(log n) time. The space usage of top trees is linear in the size of the dynamic forest.

© 2005 by Chapman & Hall/CRC

Dynamic Trees

35.4.2

35-13

Representation and Applications

Top trees are represented as standard binary trees, with pointers to parent and children for each node. With each leaf is associated the corresponding edge in T and with each internal node the at most two boundary vertices of the corresponding cluster. In addition, each vertex v of T has a pointer to the deepest cluster for which v is a non-boundary vertex, or to the root cluster containing v if v is an external boundary vertex. Given this representation, top trees can be used as a black box for maintaining diﬀerent kinds of information. Typically, the user needs to attach extra information to the top tree nodes and to show how such information can be maintained upon merge and split operations. A careful choice of the extra information makes it possible to maintain easily path properties of trees, such as the minimum weight of an edge on the path between any two vertices. In this example, the extra information wC associated with a cluster C is the weight of the lightest edge on the cluster path π(C). Before showing how to maintain it, note that if cluster A is a child of cluster C in the top tree and A contains an edge from π(C), then π(A) ⊆ π(C): we call A a path child of C. When a cluster is created by a merge, we store as extra information the minimum weight stored at its path children. In case of a split, we just discard the information. Now, in order to ﬁnd the minimum weight between any two vertices u and v, we compute the root cluster C of the top tree in which u and v are external boundary vertices by calling expose(u,v). Then π(C) is the path between u and v and wC is exactly the value we are looking for. Top trees can be used quite easily if the property we wish to maintain is a local property, i.e., being satisﬁed by a vertex/edge in a tree implies that the property is also satisﬁed in all the subtrees containing the vertex/edge. Non-local properties appear to be more challenging. For general non-local searching the user has to supply a function select that can be used to guide a binary search towards a desired edge: given the root of a top tree, the function selects one of the two children according to the property to be maintained. Since the property is non-local, in general it is not possible to recurse directly on the selected child as is. However, Alstrup et al. [2] show that the top tree can be temporarily modiﬁed by means of a few merge operations so that select can be provided with the “right” input in the recursive call and guide the search to a correct solution. LEMMA 35.1 Given a top tree, after O(log n) calls to select, merge, and split, there is a unique edge (u, v) contained in all clusters chosen by select, and then (u, v) is returned.

We refer the interested reader to [2] for the proof of Lemma 35.1, which shows how to modify the top tree in order to facilitate calls to select. We limit here to use the search as a black box in order to show how to maintain dynamically the center of a tree (i.e., a vertex which maximizes the distance from any other vertex) using top trees. The extra information maintained for a cluster C with boundary vertices a and b are: the distance dist(C) between a and b, and the lengths a (C) and b (C) of a longest path in C departing from a and b, respectively. Now we show how to compute the extra information for a cluster C obtained by merging two neighboring clusters A and B. Let c be a boundary vertex of cluster C and, w.l.o.g., let c ∈ δA. The longest path from c to a vertex in A has length c (A). Instead, in order to get from c to a vertex in B, we must traverse a vertex, say x, such that x ∈ δA ∩ δB: thus, the longest path from c to a vertex in B has length dist(c, x) + x (B). This is equal to c (B) if c ∈ δB (i.e., if x = c), or to dist(A) + x (B) if c ∈ δB. Now, we set c (C) = max{c (A), dist(c, x) + x (B)}. We can compute dist(C) similarly. Finally, function select can be implemented as follows. Given a cluster C with children A and B, let u be the vertex in the intersection of A and B: if u (A) ≥ u (B)

© 2005 by Chapman & Hall/CRC

35-14

Handbook of Data Structures and Applications

select picks A, otherwise it picks B. The correctness of select depends on the fact that if u (A) ≥ u (B), then A contains all the centers of C. Using Lemma 35.1 we can ﬁnally conclude that the center of a tree can be maintained dynamically in O(log n) time. We refer the interested reader to [1, 2] for other sample applications of top trees, such as maintaining the median or the diameter of dynamic trees. As we will recall in Section 36.5.2, top trees are fundamental in the design of the fastest algorithm for the fully dynamic minimum spanning tree problem [11].

35.5

ET Trees

ET trees, ﬁrst introduced in [18], have been later used to design algorithms for a variety of problems on dynamic graphs, such as fully dynamic connectivity and bipartiteness (see, e.g., [10, 13]). They provide an implicit representation of dynamic forests whose vertices are associated with weighted or unweighted keys. In addition to arbitrary edge insertions and deletions, updates allow it to add or remove the weighted key associated to a vertex. Supported queries are the following: • connected(u, v): tells whether vertices u and v are in the same tree. • size(v): returns the number of vertices in the tree that contains v. • minkey(v): returns a key of minimum weight in the tree that contains v; if keys are unweighted, an arbitrary key is returned. The main concept for the deﬁnition of ET trees is that of Euler tour. An Euler tour of a tree T is a maximal closed walk over the graph obtained by replacing each edge of T by two directed edges with opposite direction.

DEFINITION 35.4

The Euler tour of a tree can be easily computed in linear time by rooting the tree at an arbitrary vertex and running a depth ﬁrst visit [4]. Each time a vertex v is encountered on the walk, we call this an occurrence of v and we denote it by o(v). A vertex of degree ∆ has exactly ∆ occurrences, expect for the root which is visited ∆ + 1 times. Furthermore, the walk traverses each directed edge exactly once; hence, if T has n vertices, the Euler tour has length 2n − 2. Given an n-vertex tree T , we encode it with a sequence of 2n − 1 symbols given by an Euler tour. We refer to this encoding as ET (T ). For instance, the encoding of the tree given in Figure 35.7 derived from the Euler tour shown below the tree itself is ET (T ) = a b c b d b g f g e g b a. An ET tree is a dynamic balanced d-ary tree over some Euler tour around T . Namely, the leaves of the ET tree are the nodes of the Euler tour, in the same order in which they appear (see Figure 35.7).

DEFINITION 35.5

An ET tree has O(n) nodes due to the linear length of the Euler tour and to properties of d-ary trees. However, since each vertex of T may occur several times in the Euler tour, an arbitrary occurrence is marked as representative of the vertex.

35.5.1

Updates

We ﬁrst analyze how to update the encoding ET (T ) when T is subject to dynamic edge operations. If an edge e = (u, v) is deleted from T , denote by Tu and Tv the two trees

© 2005 by Chapman & Hall/CRC

Dynamic Trees

35-15 a

c

e

b

Tree T

g

f

d Euler tour of T a1

b1

c1

b2

d1

b3

g1

f1

g2

e1

g3

b4

a2

ET-tree of T

g3 a1

b1

c1

b2

d1

b3

g1

f1

g2

b4

a2

e1

FIGURE 35.7: A tree, an Euler tour, and the corresponding ET tree with d = 2. obtained after the deletion, with u ∈ Tu and v ∈ Tv . Let o1 (u), o1 (v), o2 (u) and o2 (v) be the occurrences of u and v encountered during the visit of (u, v). Without loss of generality assume that o1 (u) < o1 (v) < o2 (v) < o2 (u) so that ET (T ) = αo1 (u)βo1 (v)γo2 (v)δo2 (u). Then ET (Tv ) is given by the interval o1 (v)γo2 (v), and ET (Tu ) can be obtained by splicing out the interval from ET (T ), i.e., ET (Tu ) = αo1 (u)βδo2 (u). If two trees T1 and T2 are joined in a new tree T because of a new edge e = (u, v), with u ∈ T1 and v ∈ T2 , we ﬁrst reroot T2 at v. Now, given ET (T1 ) = αo1 (u)β and the computed encoding ET (T2 ) = o1 (v)γo2 (v), we compute ET (T ) = αo1 (u)o1 (v)γo2 (v)o(u)β, where o(u) is a newly created occurrence of vertex u. To complete the description, we need to show how to change the root of a tree T from r to another vertex s. Let ET (T ) = o(r)αo1 (s)β, where o1 (s) is any occurrence of s. Then, the new encoding will be o1 (s)βαo(s), where o(s) is a newly created occurrence of s that is added at the end of the new sequence. In summary, if trees in the forest are linked or cut, a constant number of the following operations is required: (i) splicing out an interval from the encoding, (ii) inserting an interval into the encoding, (iii) inserting or (iv) deleting a single occurrence from the encoding. If the encoding ET (T ) is stored in a balanced search tree of degree d, then one may perform each operation in time O(d logd n) while maintaining the balance of the tree.

35.5.2

Applications

The query connected(u, v) can be easily supported in time O(log n/d) by ﬁnding the roots of the ET trees containing u and v and checking if they coincide. The same time is suﬃcient to check whether one element precedes another element in the ordering. To support size and minkey queries, each node q of the ET tree maintains two additional values: the number s(q) of representatives below it and the minimum weight key k(q) attached to a representative below it. Such values can be easily maintained during updates

© 2005 by Chapman & Hall/CRC

35-16

Handbook of Data Structures and Applications

and allow it to answer queries of the form size(v) and minkey(v) in O(log n/d) time for any vertex v of the forest: the root r of the ET tree containing v is found and values s(r) and k(r) are returned, respectively. We refer the interested reader to [10] for additional details of the method. In Section 36.4 we will see how ET trees have been used [10, 11] to design a polylogarithmic algorithm for fully dynamic connectivity. Here we limit to observe that trees in a spanning forest of the dynamic graph are maintained using the Euler tour data structure, and therefore updates and connectivity queries within the forest can be supported in logarithmic time. The use of randomization and of a logarithmic decomposition makes it possible to maintain also non-tree edges in polylogarithmic time upon changes in the graph.

35.6

Reachability Trees

In this section we consider a tree data structure that has been widely used to solve dynamic path problems on directed graphs. The ﬁrst appearance of this tool dates back to 1981, when Even and Shiloach showed how to maintain a breadth-ﬁrst tree of an undirected graph under any sequence of edge deletions [5]; they used this as a kernel for decremental connectivity on undirected graphs. Later on, Henzinger and King [10] showed how to adapt this data structure to fully dynamic transitive closure in directed graphs. King [12] designed an extension of this tree data structure to weighted directed graphs for solving fully dynamic transitive closure (see Section 36.6.1) and all pairs shortest paths (see Section 36.7.1). In the unweighted directed version, the goal is to maintain information about breadthﬁrst search (BFS) on a directed graph G undergoing deletions of edges. In particular, in the context of dynamic path problems, we are interested in maintaining BFS trees of depth up to d, with d ≤ n. Given a directed graph G = (V, E) and a vertex r ∈ V , we would like to support any intermixed sequence of the following operations: Delete(x, y): delete edge (x, y) from G. Level(u): return the level of vertex u in the BFS tree of depth d rooted at r (return +∞ if u is not reachable from r within distance d). In [12] it is shown how to maintain eﬃciently the BFS levels, supporting any Level operation in constant time and any sequence of Delete operations in O(md) overall time: (King [12]) Maintaining BFS levels up to depth d from a given root requires O(md) time in the worst case throughout any sequence of edge deletions in a directed graph with m initial edges. LEMMA 35.2

Lemma 35.2 implies that maintaining BFS levels requires d times the time needed for constructing them. Since d ≤ n, we obtain a total bound of O(mn) if there are no limits on the depth of the BFS levels. As it was shown in [10, 12], it is possible to extend the BFS data structure presented in this section to deal with weighted directed graphs. In this case, a shortest path tree is maintained in place of BFS levels: after each edge deletion or edge weight increase, the tree is reconnected by essentially mimicking Dijkstra’s algorithm rather than BFS. Details can be found in [12].

© 2005 by Chapman & Hall/CRC

Dynamic Trees

35.7

35-17

Conclusions

In this chapter we have surveyed data structures for maintaining properties of dynamically changing trees, focusing our attention on linking and cutting trees [15], topology trees [6], top trees [1], ET trees [10, 18], and reachability trees [5]. We have shown that these data structures typically support updates and many diﬀerent kinds of queries in logarithmic (amortized or worst-case) time. Hence, problems such as tree membership, maintaining the center or diameter of a tree, ﬁnding the minimum cost on a given path can be solved in O(log n) time in a fully dynamic setting. All the data structures for maintaining properties of dynamically changing trees are not only important and interesting on their own, but are often used as building blocks by many dynamic graph algorithms, as we will see in Chapter 36. Some of these data structures, such as the union ﬁnd data structures and the linking and cutting trees of Sleator and Tarjan have myriads of applications in other problems, such as implementing property grammars, computational geometry problems, testing equivalence of ﬁnite state machines, computing the longest common subsequence of two sequences, performing uniﬁcation in logic programming and theorem proving, ﬁnding minimum spanning trees, and maximum ﬂow algorithms. Since all these problems are outside the scope of this survey, we have not mentioned these applications and have restricted our attention to the applications of these data structures to dynamic tree and graph algorithms only.

Acknowledgments This work has been supported in part by the IST Programmes of the EU under contract numbers IST-1999-14186 (ALCOM-FT) and IST-2001-33555 (COSIN), and by the Italian Ministry of University and Scientiﬁc Research (Project “ALINWEB: Algorithmics for Internet and the Web”).

References [1] S. Alstrup, J. Holm, K. de Lichtenberg, and M. Thorup. Minimizing diameters of dynamic trees. In Proc. 24th Int. Colloquium on Automata, Languages and Programming (ICALP 97), LNCS 1256, pages 270–280, 1997. [2] S. Alstrup, J. Holm, and M. Thorup. Maintaining center and median in dynamic trees. In Proc. 7th Scandinavian Workshop on Algorithm Theory (SWAT 00), pages 46– 56, 2000. [3] S. W. Bent, D. D. Sleator, and R. E. Tarjan. Biased search trees. SIAM J. Comput., 14(3):545–568, 1985. [4] T.H. Cormen, C.E. Leiserson, R.L. Rivest, and C. Stein. Introduction to Algorithms, Second Edition. The MIT Press, 2001. [5] S. Even and Y. Shiloach. An on-line edge deletion problem. J. Assoc. Comput. Mach., 28:1–4, 1981. [6] G. N. Frederickson. Data structures for on-line updating of minimum spanning trees. SIAM J. Comput., 14:781–798, 1985. [7] G. N. Frederickson. Ambivalent data structures for dynamic 2-edge-connectivity and k smallest spanning trees. SIAM J. Comput., 26(2): 484–538, 1997. [8] Z. Galil and G. F. Italiano. Fully-dynamic algorithms for 2-edge connectivity. SIAM J. Comput., 21:1047–1069, 1992. [9] F. Harary. Graph Theory. Addison-Wesley, Reading, MA, 1969.

© 2005 by Chapman & Hall/CRC

35-18

Handbook of Data Structures and Applications

[10] M. R. Henzinger and V. King. Randomized fully dynamic graph algorithms with polylogarithmic time per operation. J. Assoc. Comput. Mach., 46(4):502–536, 1999. [11] J. Holm, K. de Lichtenberg, and M. Thorup. Poly-logarithmic deterministic fullydynamic algorithms for connectivity, minimum spanning tree, 2-edge, and biconnectivity. J. Assoc. Comput. Mach., 48(4):723–760, 2001. [12] V. King. Fully dynamic algorithms for maintaining all-pairs shortest paths and transitive closure in digraphs. In Proc. 40-th Symposium on Foundations of Computer Science (FOCS 99), 1999. [13] P. B. Miltersen, S. Subramanian, J. S. Vitter, and R. Tamassia. Complexity models for incremental computation. Theoret. Comput. Science, 130:203–236, 1994. [14] M. Rauch. Fully dynamic biconnectivity in graphs. Algorithmica, 13:503-538, 1995. [15] D. D. Sleator and R. E. Tarjan. A data structure for dynamic trees. J. Comp. Syst. Sci., 24:362–381, 1983. [16] D. D. Sleator and R. E. Tarjan. Self-adjusting binary search trees. J. Assoc. Comput. Mach., 32:652–686, 1985. [17] R. E. Tarjan and J. van Leeuwen. Worst-case analysis of set union algorithms. J. Assoc. Comput. Mach., 31:245–281, 1984. [18] R. E. Tarjan and U. Vishkin. An eﬃcient parallel biconnectivity algorithm. SIAM J. on Computing, 14:862–874, 1985.

© 2005 by Chapman & Hall/CRC

36 Dynamic Graphs 36.1 36.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Techniques for Undirected Graphs . . . . . . . . . . . . . . . Clustering

36.3

•

Sparsiﬁcation

Randomization

Techniques for Directed Graphs . . . . . . . . . . . . . . . . . . Kleene Closures

36.4

•

•

36-1 36-2

•

Long Paths

Locality

•

36-5

Matrices

Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36-9

Updates in O(log2 n) Time

36.5

Camil Demetrescu Universit` a di Roma

36.6 36.7

36.1

Updates in O(log4 n)

Transitive Closure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-13 •

Updates in O(n2 )

All-Pairs Shortest √ Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-15 Updates in O(n2.5 C log n ) Time O(n2 log3 n) Time

Giuseppe F. Italiano Universit` a di Roma

•

Updates in O(n2 log n) Time Time

Irene Finocchi Universit` a di Roma

Minimum Spanning Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 36-11 Deletions in O(log2 n) Time Time

36.8

•

Updates in

Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-17

Introduction

In many applications of graph algorithms, including communication networks, VLSI design, graphics, and assembly planning, graphs are subject to discrete changes, such as insertions or deletions of vertices or edges. In the last two decades there has been a growing interest in such dynamically changing graphs, and a whole body of algorithmic techniques and data structures for dynamic graphs has been discovered. This chapter is intended as an overview of this ﬁeld. An update on a graph is an operation that inserts or deletes edges or vertices of the graph or changes attributes associated with edges or vertices, such as cost or color. Throughout this chapter by dynamic graph we denote a graph that is subject to a sequence of updates. In a typical dynamic graph problem one would like to answer queries on dynamic graphs, such as, for instance, whether the graph is connected or which is the shortest path between any two vertices. The goal of a dynamic graph algorithm is to update eﬃciently the solution of a problem after dynamic changes, rather than having to recompute it from scratch each time. Given their powerful versatility, it is not surprising that dynamic algorithms and dynamic data structures are often more diﬃcult to design and to analyze than their static counterparts. We can classify dynamic graph problems according to the types of updates allowed. In particular, a dynamic graph problem is said to be fully dynamic if the update operations include unrestricted insertions and deletions of edges or vertices. A dynamic graph problem

36-1

© 2005 by Chapman & Hall/CRC

36-2

Handbook of Data Structures and Applications

is said to be partially dynamic if only one type of update, either insertions or deletions, is allowed. More speciﬁcally, a dynamic graph problem is said to be incremental if only insertions are allowed, while it is said to be decremental if only deletions are allowed. In the ﬁrst part of this chapter we will present the main algorithmic techniques used to solve dynamic problems on both undirected and directed graphs. In the second part of the chapter we will deal with dynamic problems on graphs, and we will investigate as paradigmatic problems the dynamic maintenance of minimum spanning trees, connectivity, transitive closure and shortest paths. Interestingly enough, dynamic problems on directed graphs seem much harder to solve than their counterparts on undirected graphs, and require completely diﬀerent techniques and tools.

36.2

Techniques for Undirected Graphs

Many of the algorithms proposed in the literature use the same general techniques, and hence we begin by describing these techniques. In this section we focus on undirected graphs, while techniques for directed graphs will be discussed in Section 36.3. Typically, most of these techniques use some sort of graph decomposition, and partition either the vertices or the edges of the graph to be maintained. Moreover, data structures that maintain properties of dynamically changing trees, such as the ones described in Chapter 35 (linking and cutting trees, topology trees, and Euler tour trees), are often used as building blocks by many dynamic graph algorithms.

36.2.1

Clustering

The clustering technique has been introduced by Frederickson [13] and is based upon partitioning the graph into a suitable collection of connected subgraphs, called clusters, such that each update involves only a small number of such clusters. Typically, the decomposition deﬁned by the clusters is applied recursively and the information about the subgraphs is combined with the topology trees described in Section 35.3. A reﬁnement of the clustering technique appears in the idea of ambivalent data structures [14], in which edges can belong to multiple groups, only one of which is actually selected depending on the topology of the given spanning tree. As an example, we brieﬂy describe the application of clustering to the problem of maintaining a minimum spanning forest [13]. Let G = (V, E) be a graph with a designated spanning tree S. Clustering is used for partitioning the vertex set V into subtrees connected in S, so that each subtree is only adjacent to a few other subtrees. A topology tree, as described in Section 35.3, is then used for representing a recursive partition of the tree S. Finally, a generalization of topology trees, called 2-dimensional topology trees, are formed from pairs of nodes in the topology tree and allow it to maintain information about the edges in E \ S [13]. Fully dynamic algorithms based only on a single level of clustering obtain typically time bounds of the order of O(m2/3 ) (see for instance [17, 32]). When the partition can be applied recursively, better O(m1/2 ) time bounds can be achieved by using 2-dimensional topology trees (see, for instance, [13, 14]). THEOREM 36.1 (Frederickson [13]) The minimum spanning forest of an undirected √ graph can be maintained in time O( m ) per update, where m is the current number of edges in the graph.

© 2005 by Chapman & Hall/CRC

Dynamic Graphs

36-3

We refer the interested reader to [13, 14] for details about Frederickson’s algorithm. With √ the same technique, an O( m) time bound can be obtained also for fully dynamic connectivity and 2-edge connectivity [13, 14] The type of clustering used can very problem-dependent, however, and makes this technique diﬃcult to be used as a black box.

36.2.2

Sparsiﬁcation

Sparsiﬁcation is a general technique due to Eppstein et al. [10] that can be used as a black box (without having to know the internal details) in order to design and dynamize graph algorithms. It is a divide-and-conquer technique that allows it to reduce the dependence on the number of edges in a graph, so that the time bounds for maintaining some property of the graph match the times for computing in sparse graphs. More precisely, when the technique is applicable, it speeds up a T (n, m) time bound for a graph with n vertices and m edges to T √ (n, O(n)), i.e., to the time needed √ if the graph were sparse. For instance, if T (n, m) = O( m ), we get a better bound of O( n ). The technique itself is quite simple. A key concept is the notion of certiﬁcate. For any graph property P and graph G, a certiﬁcate for G is a graph G such that G has property P if and only if G has the property.

DEFINITION 36.1

Let G be a graph with m edges and n vertices. We partition the edges of G into a collection of O(m/n) sparse subgraphs, i.e., subgraphs with n vertices and O(n) edges. The information relevant for each subgraph can be summarized in a sparse certiﬁcate. Certiﬁcates are then merged in pairs, producing larger subgraphs which are made sparse by again computing their certiﬁcate. The result is a balanced binary tree in which each node is represented by a sparse certiﬁcate. Each update involves O(log(m/n))∗ graphs with O(n) edges each, instead of one graph with m edges. There exist two variants of sparsiﬁcation. The ﬁrst variant is used in situations where no previous fully dynamic algorithm is known. A static algorithm is used for recomputing a sparse certiﬁcate in each tree node aﬀected by an edge update. If the certiﬁcates can be found in time O(m + n), this variant gives time bounds of O(n) per update. In the second variant, certiﬁcates are maintained using a dynamic data structure. For this to work, a stability property of certiﬁcates is needed, to ensure that a small change in the input graph does not lead to a large change in the certiﬁcates. We refer the interested reader to [10] for a precise deﬁnition of stability. This variant transforms time bounds of the form O(mp ) into O(np ). DEFINITION 36.2 A time bound T (n) is well-behaved if, for some c < 1, T (n/2) < cT (n). Well-behavedness eliminates strange situations in which a time bound ﬂuctuates wildly with n. For instance, all polynomials are well-behaved. THEOREM 36.2

(Eppstein et al. [10]) Let P be a property for which we can ﬁnd sparse

∗ Throughout this chapter, we assume that log x stands for max{1, log x}, so log(m/n) is never smaller 2 than 1 even if m < 2n.

© 2005 by Chapman & Hall/CRC

36-4

Handbook of Data Structures and Applications

certiﬁcates in time f (n, m) for some well-behaved f , and such that we can construct a data structure for testing property P in time g(n, m) which can answer queries in time q(n, m). Then there is a fully dynamic data structure for testing whether a graph has property P , for which edge insertions and deletions can be performed in time O(f (n, O(n))) + g(n, O(n)), and for which the query time is q(n, O(n)). (Eppstein et al. [10]) Let P be a property for which stable sparse certiﬁcates can be maintained in time f (n, m) per update, where f is well-behaved, and for which there is a data structure for property P with update time g(n, m) and query time q(n, m). Then P can be maintained in time O(f (n, O(n))) + g(n, O(n)) per update, with query time q(n, O(n)). THEOREM 36.3

Basically, the ﬁrst version of sparsiﬁcation (Theorem 36.2) can be used to dynamize static algorithms, in which case we only need to compute eﬃciently sparse certiﬁcates, while the second version (Theorem 36.3) can be used to speed up existing fully dynamic algorithms, in which case we need to maintain eﬃciently stable sparse certiﬁcates. Sparsiﬁcation applies to a wide variety of dynamic graph problems, including minimum spanning forests, edge and vertex connectivity. As an example,√ for the fully dynamic √ minimum spanning tree problem, it reduces the update time from O( m ) [13, 14] to O( n ) [10]. Since sparsiﬁcation works on top of a given algorithm, we need not to know the internal details of this algorithm. Consequently, it can be applied orthogonally to other data structuring techniques: in a large number of situations both clustering and sparsiﬁcation have been combined to produce an eﬃcient dynamic graph algorithm.

36.2.3

Randomization

Clustering and sparsiﬁcation allow one to design eﬃcient deterministic algorithms for fully dynamic problems. The last technique we present in this section is due to Henzinger and King [20], and allows one to achieve faster update times for some problems by exploiting the power of randomization. We now sketch how the randomization technique works taking the fully dynamic connectivity problem as an example. Let G = (V, E) be a graph to be maintained dynamically, and let F be a spanning forest of G. We call edges in F tree edges, and edges in E \ F non-tree edges. The algorithm by Henzinger and King is based on the following ingredients. Maintaining Spanning Forests

Trees are maintained using the Euler Tours data structure (ET trees) described in Section 35.5: this allows one to obtain logarithmic updates and queries within the forest. Random Sampling

Another key idea is the following: when e is deleted from a tree T , use random sampling among the non-tree edges incident to T , in order to ﬁnd quickly a replacement edge for e, if any. Graph Decomposition

The last key idea is to combine randomization with a suitable graph decomposition. We maintain an edge decomposition of the current graph G using O(log n) edge disjoint subgraphs Gi = (V, Ei ). These subgraphs are hierarchically ordered. The lower levels con-

© 2005 by Chapman & Hall/CRC

Dynamic Graphs

36-5

tain tightly-connected portions of G (i.e., dense edge cuts), while the higher levels contain loosely-connected portions of G (i.e., sparse cuts). For each level i, a spanning forest for the graph deﬁned by all the edges in levels i or below is also maintained. Note that the hard operation in this problem is the deletion of a tree edge: indeed, a spanning forest is easily maintained with the help of the linking and cutting trees described in Section 35.2 throughout edge insertions, and deleting a non-tree edge does not change the forest. The goal is an update time of O(log3 n): after an edge deletion, in the quest for a replacement edge, we can aﬀord a number of sampled edges of O(log2 n). However, if the candidate set of edge e is a small fraction of all non-tree edges which are adjacent to T , it is unlikely to ﬁnd a replacement edge for e among this small sample. If we found no candidate among the sampled edges, we must check explicitly all the non-tree edges adjacent to T . After random sampling has failed to produce a replacement edge, we need to perform this check explicitly, otherwise we would not be guaranteed to provide correct answers to the queries. Since there might be a lot of edges which are adjacent to T , this explicit check could be an expensive operation, so it should be made a low probability event for the randomized algorithm. This can produce pathological updates, however, since deleting all edges in a relatively small candidate set, reinserting them, deleting them again, and so on will almost surely produce many of those unfortunate events. The graph decomposition is used to prevent the undesirable behavior described above. If a spanning forest edge e is deleted from a tree at some level i, random sampling is used to quickly ﬁnd a replacement for e at that level. If random sampling succeeds, the tree is reconnected at level i. If random sampling fails, the edges that can replace e in level i form with high probability a sparse cut. These edges are moved to level i + 1 and the same procedure is applied recursively on level i + 1. (Henzinger and King [20]) Let G be a graph with m0 edges and n vertices subject to edge deletions only. A spanning forest of G can be maintained in O(log3 n) expected amortized time per deletion, if there are at least Ω(m0 ) deletions. The time per query is O(log n). THEOREM 36.4

36.3

Techniques for Directed Graphs

In this section we discuss the main techniques used to solve dynamic path problems on directed graphs. We ﬁrst address combinatorial and algebraic properties, and then we consider some eﬃcient data structures, which are used as building blocks in designing dynamic algorithms for transitive closure and shortest paths. Similarly to the case of undirected graphs seen in Section 36.2, data structures that maintain properties of dynamically changing trees, such as the ones described in Chapter 35 (reachability trees), are often used as building blocks by many dynamic graph algorithms.

36.3.1

Kleene Closures

Path problems such as transitive closure and shortest paths are tightly related to matrix sum and matrix multiplication over a closed semiring (see [5] for more details). In particular, the transitive closure of a directed graph can be obtained from the adjacency matrix of the graph via operations on the semiring of Boolean matrices, that we denote by {+, ·, 0, 1}. In this case, + and · denote the usual sum and multiplication over Boolean matrices.

© 2005 by Chapman & Hall/CRC

36-6

Handbook of Data Structures and Applications

LEMMA 36.1 Let G = (V, E) be a directed graph and let T C(G) be the (reﬂexive) transitive closure of G. If X is the Boolean adjacency matrix of G, then the Boolean adjacency matrix of T C(G) is the Kleene closure of X on the {+, ·, 0, 1} Boolean semiring:

X∗ =

n−1

X i.

i=0

Similarly, shortest path distances in a directed graph with real-valued edge weights can be obtained from the weight matrix of the graph via operations on the semiring of real-valued matrices, that we denote by {⊕, , R}, or more simply by {min, +}. Here, R is the set of real values and ⊕ and are deﬁned as follows. Given two real-valued matrices A and B, C = A B is the matrix product such that C[x, y] = min1≤z≤n {A[x, z] + B[z, y]} and D = A ⊕ B is the matrix sum such that D[x, y] = min{A[x, y], B[x, y]}. We also denote by AB the product A B and by AB[x, y] entry (x, y) of matrix AB. Let G = (V, E) be a weighted directed graph with no negative-length cycles. If X is a weight matrix such that X[x, y] is the weight of edge (x, y) in G, then the distance matrix of G is the Kleene closure of X on the {⊕, , R} semiring:

LEMMA 36.2

X∗ =

n−1

X i.

i=0

We now brieﬂy recall two well-known methods for computing the Kleene closure X ∗ of X. In the following, we assume that X is an n × n matrix. Logarithmic Decomposition

A simple method to compute X ∗ , based on repeated squaring, requires O(nµ · log n) worstcase time, where O(nµ ) is the time required for computing the product of two matrices over a closed semiring. This method performs log2 n sums and products of the form Xi+1 = Xi + Xi2 , where X = X0 and X ∗ = Xlog2 n . Recursive Decomposition

Another method, due to Munro [28], is based on a Divide and Conquer strategy and computes X ∗ in O(nµ ) worst-case time. Munro observed that, if we partition X in four submatrices A, B, D, C of size n/2 × n/2 (considered in clockwise order), and X ∗ similarly in four submatrices E, F , H, G of size n/2 × n/2, then X ∗ is deﬁned recursively according to the following equations: E = (A + BD∗ C)∗

F = EBD ∗

G = D∗ CE

H = D ∗ + D∗ CEBD∗

Surprisingly, using this decomposition the cost of computing X ∗ starting from X is asymptotically the same as the cost of multiplying two matrices over a closed semiring.

36.3.2

Long Paths

In this section we recall an intuitive combinatorial property of long paths in a graph. Namely, if we pick a subset S of vertices at random from a graph G, then a suﬃciently

© 2005 by Chapman & Hall/CRC

Dynamic Graphs

36-7

long path will intersect S with high probability. This can be very useful in ﬁnding a long path by using short searches. To the best of our knowledge, the long paths property was ﬁrst given in [18], and later on it has been used many times in designing eﬃcient algorithms for transitive closure and shortest paths (see e.g., [7, 24, 37, 38]). The following theorem is from [37]. (Ullman and Yannakakis [37]) Let S ⊆ V be a set of vertices chosen uniformly at random. Then the probability that a given simple path has a sequence of more than (cn log n)/|S| vertices, none of which are from S, for any c > 0, is, for suﬃciently large n, bounded by 2−αc for some positive α. THEOREM 36.5

Zwick [38] showed it is possible to choose set S deterministically by a reduction to a hitting set problem [3, 27]. King used a similar idea for maintaining fully dynamic shortest paths [24].

36.3.3

Locality

Recently, Demetrescu and Italiano [8] proposed a new approach to dynamic path problems based on maintaining classes of paths characterized by local properties, i.e., properties that hold for all proper subpaths, even if they may not hold for the entire paths. They showed that this approach can play a crucial role in the dynamic maintenance of shortest paths. For instance, they considered a class of paths deﬁned as follows: A path π in a graph is locally shortest if and only if every proper subpath of π is a shortest path.

DEFINITION 36.3

This deﬁnition is inspired by the optimal-substructure property of shortest paths: all subpaths of a shortest path are shortest. However, a locally shortest path may not be shortest. The fact that locally shortest paths include shortest paths as a special case makes them an useful tool for computing and maintaining distances in a graph. Indeed, paths deﬁned locally have interesting combinatorial properties in dynamically changing graphs. For example, it is not diﬃcult to prove that the number of locally shortest paths that may change due to an edge weight update is O(n2 ) if updates are partially dynamic, i.e., increase-only or decrease-only: THEOREM 36.6 Let G be a graph subject to a sequence of increase-only or decrease-only edge weight updates. Then the amortized number of paths that start or stop being locally shortest at each update is O(n2 ).

Unfortunately, Theorem 36.6 does not hold if updates are fully dynamic, i.e., increases and decreases of edge weights are intermixed. To cope with pathological sequences, a possible solution is to retain information about the history of a dynamic graph, considering the following class of paths: A historical shortest path (in short, historical path) is a path that has been shortest at least once since it was last updated.

DEFINITION 36.4

© 2005 by Chapman & Hall/CRC

36-8

Handbook of Data Structures and Applications

Here, we assume that a path is updated when the weight of one of its edges is changed. Applying the locality technique to historical paths, we derive locally historical paths: A path π in a graph is locally historical if and only if every proper subpath of π is historical.

DEFINITION 36.5

Like locally shortest paths, also locally historical paths include shortest paths, and this makes them another useful tool for maintaining distances in a graph: If we denote by SP , LSP , and LHP respectively the sets of shortest paths, locally shortest paths, and locally historical paths in a graph, then at any time the following inclusions hold: SP ⊆ LSP ⊆ LHP .

LEMMA 36.3

Diﬀerently from locally shortest paths, locally historical paths exhibit interesting combinatorial properties in graphs subject to fully dynamic updates. In particular, it is possible to prove that the number of paths that become locally historical in a graph at each edge weight update depends on the number of historical paths in the graph. (Demetrescu and Italiano [8]) Let G be a graph subject to a sequence of update operations. If at any time throughout the sequence of updates there are at most O(h) historical paths in the graph, then the amortized number of paths that become locally historical at each update is O(h). THEOREM 36.7

To keep changes in locally historical paths small, it is then desirable to have as few historical paths as possible. Indeed, it is possible to transform every update sequence into a slightly longer equivalent sequence that generates only a few historical paths. In particular, there exists a simple smoothing strategy that, given any update sequence Σ of length k, produces an operationally equivalent sequence F (Σ) of length O(k log k) that yields only O(log k) historical shortest paths between each pair of vertices in the graph. We refer the interested reader to [8] for a detailed description of this smoothing strategy. According to Theorem 36.7, this technique implies that only O(n2 log k) locally historical paths change at each edge weight update in the smoothed sequence F (Σ). As elaborated in [8], locally historical paths can be maintained very eﬃciently. Since by Lemma 36.3 locally historical paths include shortest paths, this yields the fastest known algorithm for fully dynamic all pairs shortest paths (see Section 36.7.2).

36.3.4

Matrices

Another useful data structure for keeping information about paths in dynamic directed graphs is based on matrices subject to dynamic changes. As we have seen in Section 36.3.1, Kleene closures can be constructed by evaluating polynomials over matrices. It is therefore natural to consider data structures for maintaining polynomials of matrices subject to updates of entries, like the one introduced in [6]. In the case of Boolean matrices, the problem can be stated as follows. Let P be a polynomial over n×n Boolean matrices with constant degree, constant number of terms, and variables X1 . . . Xk . We wish to maintain a data structure for P subject to any intermixed sequence of update and query operations of the following kind: SetRow(i, ∆X, Xb): sets to one the entries in the i-th row of variable Xb of polynomial

© 2005 by Chapman & Hall/CRC

Dynamic Graphs

36-9

P corresponding to one-valued entries in the i-th row of matrix ∆X. SetCol(i, ∆X, Xb): sets to one the entries in the i-th column of variable Xb of polynomial P corresponding to one-valued entries in the i-th column of matrix ∆X. Reset(∆X, Xb ): resets to zero the entries of variable Xb of polynomial P corresponding to one-valued entries in matrix ∆X. Lookup(): returns the maintained value of P . We add to the previous four operations a further update operation especially designed for maintaining path problems: LazySet(∆X, Xb): sets to 1 the entries of variable Xb of P corresponding to onevalued entries in matrix ∆X. However, the maintained value of P might not be immediately aﬀected by this operation. Let CP be the correct value of P that we would have by recomputing it from scratch after each update, and let MP be the actual value that we maintain. If no LazySet operation is ever performed, then always MP = CP . Otherwise, MP is not necessarily equal to CP , and we guarantee the following weaker property on MP : if CP [u, v] ﬂips from 0 to 1 due to a SetRow/SetCol operation on a variable Xb , then MP [u, v] ﬂips from 0 to 1 as well. This means that SetRow and SetCol always correctly reveal new 1’s in the maintained value of P , possibly taking into account the 1’s inserted through previous LazySet operations. This property is crucial for dynamic path problems, since the appearance of new paths in a graph after an edge insertion, which corresponds to setting a bit to one in its adjacency matrix, is always correctly recorded in the data structure. (Demetrescu and Italiano [6]) Let P be a polynomial with constant degree of matrices over the Boolean semiring. Any SetRow, SetCol, LazySet, and Reset operation on a polynomial P can be supported in O(n2 ) amortized time. Lookup queries are answered in optimal time.

LEMMA 36.4

Similar data structures can be given for settings diﬀerent from the semiring of Boolean matrices. In particular, in [7] the problem of maintaining polynomials of matrices over the {min, +} semiring is addressed. The running time of operations for maintaining polynomials in this semiring is given below. THEOREM 36.8 (Demetrescu and Italiano [7]) Let P be a polynomial with constant degree of matrices over the {min, +} semiring. Any SetRow, SetCol, LazySet, and Reset operation on variables of P can be supported in O(D · n2 ) amortized time, where D is the maximum number of diﬀerent values assumed by entries of variables during the sequence of operations. Lookup queries are answered in optimal time.

36.4

Connectivity

In this section and in Section 36.5 we consider dynamic problems on undirected graphs, showing how to deploy some of the techniques and data structures presented in Section 36.2 to obtain eﬃcient algorithms. These algorithms maintain eﬃciently some property of an undirected graph that is undergoing structural changes deﬁned by insertion and deletion of

© 2005 by Chapman & Hall/CRC

36-10

Handbook of Data Structures and Applications

edges, and/or updates of edge costs. To check the graph property throughout a sequence of these updates, the algorithms must be prepared to answer queries on the graph property eﬃciently. In particular, in this section we address the fully dynamic connectivity problem, where we are interested in algorithms that are capable of inserting edges, deleting edges, and answering a query on whether the graph is connected, or whether two vertices are in the same connected component. We recall that the goal of a dynamic algorithm is to minimize the amount of recomputation required after each update. All the dynamic algorithms that we describe are able to maintain dynamically the graph property at a cost (per update operation) which is signiﬁcantly smaller than the cost of recomputing the graph property from scratch.

36.4.1

Updates in O(log2 n) Time

In this section we give a high level description of the fastest deterministic algorithm for the fully dynamic connectivity problem in undirected graphs [22]: the algorithm, due to Holm, de Lichtenberg and Thorup, answers connectivity queries in O(log n/ log log n) worst-case running time while supporting edge insertions and deletions in O(log2 n) amortized time. Similarly to the randomized algorithm in [20], the deterministic algorithm in [22] maintains a spanning forest F of the dynamically changing graph G. As above, we will refer to the edges in F as tree edges. Let e be a tree edge of forest F , and let T be the tree of F containing it. When e is deleted, the two trees T1 and T2 obtained from T after the deletion of e can be reconnected if and only if there is a non-tree edge in G with one endpoint in T1 and the other endpoint in T2 . We call such an edge a replacement edge for e. In other words, if there is a replacement edge for e, T is reconnected via this replacement edge; otherwise, the deletion of e creates a new connected component in G. To accommodate systematic search for replacement edges, the algorithm associates to each edge e a level (e) and, based on edge levels, maintains a set of sub-forests of the spanning forest F : for each level i, forest Fi is the sub-forest induced by tree edges of level ≥ i. If we denote by L denotes the maximum edge level, we have that: F = F0 ⊇ F1 ⊇ F2 ⊇ . . . ⊇ FL , Initially, all edges have level 0; levels are then progressively increased, but never decreased. The changes of edge levels are accomplished so as to maintain the following invariants, which obviously hold at the beginning. Invariant (1): F is a maximum spanning forest of G if edge levels are interpreted as weights. Invariant (2): The number of nodes in each tree of Fi is at most n/2i . Invariant (1) should be interpreted as follows. Let (u, v) be a non-tree edge of level (u, v) and let u · · · v be the unique path between u and v in F (such a path exists since F is a spanning forest of G). Let e be any edge in u · · · v and let (e) be its level. Due to (1), (e) ≥ (u, v). Since this holds for each edge in the path, and by construction F(u,v) contains all the tree edges of level ≥ (u, v), the entire path is contained in F(u,v) , i.e., u and v are connected in F(u,v) . Invariant (2) implies that the maximum number of levels is L ≤ log2 n. Note that when a new edge is inserted, it is given level 0. Its level can be then increased at most log2 n times as a consequence of edge deletions. When a tree edge e = (v, w) of level (e) is deleted, the algorithm looks for a replacement edge at the highest possible level, if any. Due to invariant (1), such a replacement edge has level ≤ (e). Hence, a

© 2005 by Chapman & Hall/CRC

Dynamic Graphs

36-11

replacement subroutine Replace((u, w),(e)) is called with parameters e and (e). We now sketch the operations performed by this subroutine. Replace((u, w),) ﬁnds a replacement edge of the highest level ≤ , if any. If such a replacement does not exist in level , we have two cases: if > 0, we recurse on level − 1; otherwise, = 0, and we can conclude that the deletion of (v, w) disconnects v and w in G. During the search at level , suitably chosen tree and non-tree edges may be promoted at higher levels as follows. Let Tv and Tw be the trees of forest F obtained after deleting (v, w) and let, w.l.o.g., Tv be smaller than Tw . Then Tv contains at most n/2+1 vertices, since Tv ∪ Tw ∪ {(v, w)} was a tree at level and due to invariant (2). Thus, edges in Tv of level can be promoted at level + 1 by maintaining the invariants. Non-tree edges incident to Tv are ﬁnally visited one by one: if an edge does connect Tv and Tw , a replacement edge has been found and the search stops, otherwise its level is increased by 1. We maintain an ET-tree, as described in Section 35.5, for each tree of each forest. Consequently, all the basic operations needed to implement edge insertions and deletions can be supported in O(log n) time. In addition to inserting and deleting edges from a forest, ET-trees must also support operations such as ﬁnding the tree of a forest that contains a given vertex, computing the size of a tree, and, more importantly, ﬁnding tree edges of level in Tv and non-tree edges of level incident to Tv . This can be done by augmenting the ET-trees with a constant amount of information per node: we refer the interested reader to [22] for details. Using an amortization argument based on level changes, the claimed O(log2 n) bound on the update time can be ﬁnally proved. Namely, inserting an edge costs O(log n), as well as increasing its level. Since this can happen O(log n) times, the total amortized insertion cost, inclusive of level increases, is O(log2 n). With respect to edge deletions, cutting and linking O(log n) forest has a total cost O(log2 n); moreover, there are O(log n) recursive calls to Replace, each of cost O(log n) plus the cost amortized over level increases. The ET-trees over F0 = F allows it to answer connectivity queries in O(log n) worst-case time. As shown in [22], this can be reduced to O(log n/ log log n) by using a Θ(log n)-ary version of ET-trees. THEOREM 36.9 (Holm et al. [22]) A dynamic graph G with n vertices can be maintained upon insertions and deletions of edges using O(log2 n) amortized time per update and answering connectivity queries in O(log n/ log log n) worst-case running time.

36.5

Minimum Spanning Tree

One of the most studied dynamic problem on undirected graphs is the fully dynamic minimum spanning tree problem, which consists of maintaining a minimum spanning forest of a graph during insertions of edges, deletions of edges, and edge cost changes. In this section, we show that a few simple changes to the connectivity algorithm presented in Section 36.4 are suﬃcient to maintain a minimum spanning forest of a weighted undirected graph upon deletions of edges [22]. A general reduction from [19] can then be applied to make the deletions-only algorithm fully dynamic.

© 2005 by Chapman & Hall/CRC

36-12

36.5.1

Handbook of Data Structures and Applications

Deletions in O(log2 n) Time

In addition to starting from a minimum spanning forest, the only change concerns function Replace, that should be implemented so as to consider candidate replacement edges of level in order of increasing weight, and not in arbitrary order. To do so, the ET-trees described in Section 35.5 can be augmented so that each node maintains the minimum weight of a non-tree edge incident to the Euler tour segment below it. All the operations can still be supported in O(log n) time, yielding the same time bounds as for connectivity. We now discuss the correctness of the algorithm. In particular, function Replace returns a replacement edge of minimum weight on the highest possible level: it is not immediate that such a replacement edge has the minimum weight among all levels. This can be proved by ﬁrst showing that the following invariant, proved in [22], is maintained by the algorithm: Invariant (3): Every cycle C has a non-tree edge of maximum weight and minimum level among all the edges in C. Invariant (3) can be used to prove that, among all the replacement edges, the lightest edge is on the maximum level. Let e1 and e2 be two replacement edges with w(e1 ) < w(e2 ), and let Ci be the cycle induced by ei in F , i = 1, 2. Since F is a minimum spanning forest, ei has maximum weight among all the edges in Ci . In particular, since by hypothesis w(e1 ) < w(e2 ), e2 is also the heaviest edge in cycle C = (C1 ∪ C2 ) \ (C1 ∩ C2 ). Thanks to Invariant (3), e2 has minimum level in C, proving that (e2 ) ≤ (e1 ). Thus, considering non-tree edges from higher to lower levels is correct. LEMMA 36.5 (Holm et al. [22]) There exists a deletions-only minimum spanning forest algorithm that can be initialized on a graph with n vertices and m edges and supports any sequence of edge deletions in O(m log2 n) total time.

36.5.2

Updates in O(log4 n) Time

The reduction used to obtain a fully dynamic algorithm, which involves the top tree data structure discussed in Section 35.4, is a slight generalization of the construction proposed by Henzinger and King [19], and works as follows. [19, 22] Suppose we have a deletions-only minimum spanning tree algorithm that, for any k and l, can be initialized on a graph with k vertices and l edges and supports any sequence of Ω(l) deletions in total time O(l·t(k, l)), where t is a non-decreasing function. Then there exists a fully-dynamic minimum spanning tree algorithm for a graph with n nodes starting with no edges, that, for m edges, supports updates in time ⎛ ⎞ 3+log2 m i O ⎝log3 n + t(min{n, 2j }, 2j )⎠ LEMMA 36.6

i=1

j=1

We refer the interested reader to references [19] and [22] for the description of the construction that proves Lemma 36.6. From Lemma 36.5 we get t(k, l) = O(log2 k). Hence, combining Lemmas 36.5 and 36.6, we get the claimed result. THEOREM 36.10

© 2005 by Chapman & Hall/CRC

(Holm et al. [22]) There exists a fully-dynamic minimum spanning

Dynamic Graphs

36-13

forest algorithm that, for a graph with n vertices, starting with no edges, maintains a minimum spanning forest in O(log4 n) amortized time per edge insertion or deletion.

36.6

Transitive Closure

In the rest of this chapter we survey the newest results for dynamic problems on directed graphs. In particular, we focus on two of the most fundamental problems: transitive closure and shortest paths. These problems play a crucial role in many applications, including network optimization and routing, traﬃc information systems, databases, compilers, garbage collection, interactive veriﬁcation systems, industrial robotics, dataﬂow analysis, and document formatting. In this section we consider the best known algorithms for fully dynamic transitive closure. Given a directed graph G with n vertices and m edges, the problem consists of supporting any intermixed sequence of operations of the following kind: Insert(u, v): insert edge (u, v) in G; Delete(u, v): delete edge (u, v) from G; Query(x, y): answer a reachability query by returning “yes” if there is a path from vertex x to vertex y in G, and “no” otherwise; A simple-minded solution to this problem consists of maintaining the graph under insertions and deletions, searching if y is reachable from x at any query operation. This yields O(1) time per update (Insert and Delete), and O(m) time per query, where m is the current number of edges in the maintained graph. Another simple-minded solution would be to maintain the Kleene closure of the adjacency matrix of the graph, rebuilding it from scratch after each update operation. Using the recursive decomposition of Munro [28] discussed in Section 36.3.1 and fast matrix multiplication [4], this takes constant time per reachability query and O(nω ) time per update, where ω < 2.38 is the current best exponent for matrix multiplication. Despite many years of research in this topic, no better solution to this problem was known until 1995, when Henzinger and King [20] proposed a randomized Monte Carlo algorithm with one-sided error supporting a query time of O(n/ log n) and an amortized update time of O(nm 0.58 log2 n), where m is the average number of edges in the graph throughout the whole update sequence. Since m can be as high as O(n2 ), their update time is O(n2.16 log2 n). Khanna, Motwani and Wilson [23] proved that, when a lookahead of Θ(n0.18 ) in the updates is permitted, a deterministic update bound of O(n2.18 ) can be achieved. King and Sagert [25] showed how to support queries in O(1) time and updates in O(n2.26 ) time for general directed graphs and O(n2 ) time for directed acyclic graphs; their algorithm is randomized with one-sided error. The bounds of King and Sagert were further improved by King [24], who exhibited a deterministic algorithm on general digraphs with O(1) query time and O(n2 log n) amortized time per update operations, where updates are insertions of a set of edges incident to the same vertex and deletions of an arbitrary subset of edges. Using a diﬀerent framework, in 2000 Demetrescu and Italiano [6] obtained a deterministic fully dynamic algorithm that achieves O(n2 ) amortized time per update for general directed graphs. We note that each update might change a portion of the transitive closure as large as Ω(n2 ). Thus, if the transitive closure has to be maintained explicitly after each update so that queries can be answered with one lookup, O(n2 ) is the best update bound one could hope for. If one is willing to pay more for queries, Demetrescu and Italiano [6] showed how to break the O(n2 ) barrier on the single-operation complexity of fully dynamic transitive clo-

© 2005 by Chapman & Hall/CRC

36-14

Handbook of Data Structures and Applications

sure: building on a previous path counting technique introduced by King and Sagert [25], they devised a randomized algorithm with one-sided error for directed acyclic graphs that achieves O(n1.58 ) worst-case time per update and O(n0.58 ) worst-case time per query. Other recent results for dynamic transitive closure appear in [34, 35].

36.6.1

Updates in O(n2 log n) Time

In this section we address the algorithm by King [24], who devised the ﬁrst deterministic near-quadratic update algorithm for fully dynamic transitive closure. The algorithm is based on the reachability tree data structure considered in Section 35.6 and on the logarithmic decomposition discussed in Section 36.3.1. It maintains explicitly the transitive closure of a graph G in O(n2 log n) amortized time per update, and supports inserting and deleting several edges of the graph with just one operation. Insertion of a bunch of edges incident to a vertex and deletion of any subset of edges in the graph require asymptotically the same time of inserting/deleting just one edge. The algorithm maintains log n + 1 levels: level i, 0 ≤ i ≤ log n, maintains a graph Gi whose edges represent paths of length up to 2i in the original graph G. Thus, G0 = G and Glog n is the transitive closure of G. Each level graph Gi is built on top of the previous level graph Gi−1 by keeping two trees of depth ≤ 2 rooted at each vertex v: an out-tree OU Ti (v) maintaining vertices reachable from v by traversing at most two edges in Gi−1 , and an in-tree INi (v) maintaining vertices that reach v by traversing at most two edges in Gi−1 . Trees INi (v) can be constructed by considering the orientation of edges in Gi−1 reversed. An edge (x, y) will be in Gi if and only if x ∈ INi (v) and y ∈ OU Ti (v) for some v. In/out trees are maintained with the deletions-only reachability tree data structure considered in Section 35.6. To update the levels after an insertion of edges around a vertex v in G, the algorithm simply rebuilds INi (v) and OU Ti (v) for each i, 1 ≤ i ≤ log n, while other trees are not touched. This means that some trees might not be up to date after an insertion operation. Nevertheless, any path in G is represented in at least the in/out trees rooted at the latest updated vertex in the path, so the reachability information is correctly maintained. This idea is the key ingredient of King’s algorithm. When an edge is deleted from Gi , it is also deleted from any data structures INi (v) and OU Ti (v) that contain it. The interested reader can ﬁnd further details in [24].

36.6.2

Updates in O(n2 ) Time

In this section we address the algorithm by Demetrescu and Italiano [6]. The algorithm is based on the matrix data structure considered in Section 36.3.4 and on the recursive decomposition discussed in Section 36.3.1. It maintains explicitly the transitive closure of a graph in O(n2 ) amortized time per update, supporting the same generalized update operations of King’s algorithm, i.e., insertion of a bunch of edges incident to a vertex and deletion of any subset of edges in the graph with just one operation. This is the best known update bound for fully dynamic transitive closure with constant query time. The algorithm maintains the Kleene closure X ∗ of the n × n adjacency matrix X of the graph as the sum of two matrices X1 and X2 . Let V1 be the subset of vertices of the graph corresponding to the ﬁrst half of indices of X, and let V2 contain the remaining vertices. Both matrices X1 and X2 are deﬁned according to Munro’s equations of Section 36.3.1, but in such a way that paths appearing due to an insertion of edges around a vertex in V1 are correctly recorded in X1 , while paths that appear due to an insertion of edges around

© 2005 by Chapman & Hall/CRC

Dynamic Graphs

36-15

a vertex in V2 are correctly recorded in X2 . Thus, neither X1 nor X2 encode complete information about X ∗ , but their sum does. In more detail, assuming that X is decomposed in sub-matrices A, B, C, D as explained in Section 36.3.1, and that X1 , and X2 are similarly decomposed in sub-matrices E1 , F1 , G1 , H1 and E2 , F2 , G2 , H2 , the algorithm maintains X1 and X2 with the following 8 polynomials using the data structure discussed in Section 36.3.4: Q = A + BP 2 C F1 = E12 BP G1 = P CE12 H1 = P CE12 BP

E2 = E1 BH22 CE1 F2 = E1 BH22 G2 = H22 CE1 R = D + CE12 B

where P = D∗ , E1 = Q∗ , and H2 = R∗ are Kleene closures maintained recursively as smaller instances of the problem of size n/2 × n/2. To support an insertion of edges around a vertex in V1 , strict updates are performed on polynomials Q, F1 , G1 , and H1 using SetRow and SetCol, while E2 , F2 , G2 , and R are updated with LazySet. Insertions around V2 are performed symmetrically, while deletions are supported via Reset operations on each polynomial in the recursive decomposition. Finally, P , E1 , and H2 are updated recursively. The interested reader can ﬁnd the low-level details of the method in [6].

36.7

All-Pairs Shortest Paths

In this section we survey the best known algorithms for fully dynamic all pairs shortest paths (in short APSP). Given a weighted directed graph G with n vertices and m edges, the problem consists of supporting any intermixed sequence of operations of the following kind: Update(u, v, w): updates the weight of edge (u, v) in G to the new value w (if w = +∞ this corresponds to edge deletion); Query(x, y): returns the distance from vertex x to vertex y in G, or +∞ if no path between them exists; The dynamic maintenance of shortest paths has a remarkably long history, as the ﬁrst papers date back to 35 years ago [26, 29, 33]. After that, many dynamic shortest paths algorithms have been proposed (see, e.g., [11, 15, 16, 30, 31, 36]), but their running times in the worst case were comparable to recomputing APSP from scratch. The ﬁrst dynamic shortest path algorithms which are provably faster than recomputing APSP from scratch, only worked on graphs with small integer weights. In particular, Ausiello et al. [1] proposed a decrease-only shortest path algorithm for directed graphs having positive integer weights less than C: the amortized running time of their algorithm is O(Cn log n) per edge insertion. Henzinger et al. [21] designed a fully dynamic algorithm for APSP on planar graphs with integer weights, with a running time of O(n4/3 log(nC)) per operation. Fakcharoemphol and Rao in [12] designed a fully dynamic algorithm for single-source shortest paths in planar directed graphs that supports both queries and edge weight updates in O(n4/5 log13/5 n) amortized time per edge operation. The ﬁrst big step on general graphs and integer weights was made by King [24], who presented a fully dynamic algorithm for maintaining all pairs shortest paths in directed graphs√with positive integer weights less than C: the running time of her algorithm is O(n2.5 C log n ) per update. Demetrescu and Italiano [7] gave the ﬁrst algorithm for fully dynamic APSP on general directed graphs with real weights assuming that each edge weight can attain a limited

© 2005 by Chapman & Hall/CRC

36-16

Handbook of Data Structures and Applications

number S of diﬀerent real values throughout the sequence of updates. In particular, the algorithm supports each update in O(n2.5 S log3 n ) amortized time and each query in O(1) worst-case time. The same authors discovered the ﬁrst algorithm that solves the fully dynamic all pairs shortest paths problem in its generality [8]. The algorithm maintains explicitly information about shortest paths supporting any edge weight update in O(n2 log3 n) amortized time per operation in directed graphs with non-negative real edge weights. Distance queries are answered with one lookup and actual shortest paths can be reconstructed in optimal time. We note that each update might change a portion of the distance matrix as large as Ω(n2 ). Thus, if the distance matrix has to be maintained explicitly after each update so that queries can be answered with one lookup, O(n2 ) is the best update bound one could hope for. Other deletions-only algorithms for APSP, in the simpler case of unweighted graphs, are presented in [2].

36.7.1

√

Updates in O(n2.5 C log n ) Time

In this section we consider the dynamic shortest paths algorithm by King [24]. The algorithm is based on the long paths property discussed in Section 36.3.2 and on the reachability tree data structure Section 35.6. Similarly to the transitive closure algorithms described in Section 36.6 generalized update operations are supported within the same bounds, i.e., insertion (or weight decrease) of a bunch of edges incident to a vertex, and deletion (or weight increase) of any subset of edges in the graph with just one operation. The main idea of the algorithm is to maintain dynamically all pairs shortest paths up to a distance d, and to recompute longer shortest paths from scratch at each update by stitching together shortest paths of length ≤ d. For the sake of simplicity, we only consider the case of unweighted graphs: an extension to deal with positive integer weights less than C is described in [24]. To maintain shortest paths up to distance d, similarly to the transitive closure algorithm by King described in Section 36.6, the algorithm keeps a pair of in/out shortest paths trees IN (v) and OU T (v) of depth ≤ d rooted at each vertex v. Trees IN (v) and OU T (v) are maintained with the decremental data structure mentioned in Chapter 35. It is easy to prove that, if the distance dxy between any pair of vertices x and y is at most d, then dxy is equal to the minimum of dxv + dvy over all vertices v such that x ∈ IN (v) and y ∈ OU T (v). To support updates, insertions of edges around a vertex v are handled by rebuilding only IN (v) and OU T (v), while edge deletions are performed via operations on any trees that contain them. The amortized cost of such updates is O(n2 d) per operation. To maintain shortest paths longer than d, the algorithm exploits the long paths property of Theorem 36.5: in particular, it hinges on the observation that, if H is a random subset of Θ((n log n)/d) vertices in the graph, then the probability of ﬁnding more than d consecutive vertices in a path, none of which are from H, is very small. Thus, if we look at vertices in H as “hubs”, then any shortest path from x to y of length ≥ d can be obtained by stitching together shortest subpaths of length ≤ d that ﬁrst go from x to a vertex in H, then jump between vertices in H, and eventually reach y from a vertex in H. This can be done by ﬁrst computing shortest paths only between vertices in H using any cubic-time static all-pairs shortest paths algorithm, and then by extending them at both endpoints with shortest paths of length ≤ d to reach all other vertices. This stitching operation requires O(n2 |H|) = O((n3 log n)/d) time. √ √ Choosing d = n log n yields an O(n2.5 log n) amortized update time. As mentioned in Section 36.3.2, since H can be computed deterministically, the algorithm can be derandom-

© 2005 by Chapman & Hall/CRC

Dynamic Graphs

36-17

ized. The interested reader can ﬁnd further details on the algorithm in [24].

36.7.2

Updates in O(n2 log3 n) Time

In this section we address the algorithm by Demetrescu and Italiano [8], who devised the ﬁrst deterministic near-quadratic update algorithm for fully dynamic all-pairs shortest paths. This algorithm is also the ﬁrst solution to the problem in its generality. The algorithm is based on the notions of historical paths and locally historical paths in a graph subject to a sequence of updates, as discussed in Section 36.3.3. The main idea is to maintain dynamically the locally historical paths of the graph in a data structure. Since by Lemma 36.3 shortest paths are locally historical, this guarantees that information about shortest paths is maintained as well. To support an edge weight update operation, the algorithm implements the smoothing strategy mentioned in Section 36.3.3 and works in two phases. It ﬁrst removes from the data structure all maintained paths that contain the updated edge: this is correct since historical shortest paths, in view of their deﬁnition, are immediately invalidated as soon as they are touched by an update. This means that also locally historical paths that contain them are invalidated and have to be removed from the data structure. As a second phase, the algorithm runs an all-pairs modiﬁcation of Dijkstra’s algorithm [9], where at each step a shortest path with minimum weight is extracted from a priority queue and it is combined with existing historical shortest paths to form new locally historical paths. At the end of this phase, paths that become locally historical after the update are correctly inserted in the data structure. The update algorithm spends constant time for each of the O(zn2 ) new locally historical path (see Theorem 36.7). Since the smoothing strategy lets z = O(log n) and increases the length of the sequence of updates by an additional O(log n) factor, this yields O(n2 log3 n) amortized time per update. The interested reader can ﬁnd further details about the algorithm in [8].

36.8

Conclusions

In this chapter we have surveyed the algorithmic techniques underlying the fastest known dynamic graph algorithms for several problems, both on undirected and on directed graphs. Most of the algorithms that we have presented achieve bounds that are close to the best possible. In particular, we have presented fully dynamic algorithms with polylogarithmic amortized time bounds for connectivity and minimum spanning trees [22] on undirected graphs. It remains an interesting open problem to show whether polylogarithmic update bounds can be achieved also in √ the worst case: we recall that for both problems the current best worst-case bound is O( n ) per update, and it is obtained with the sparsiﬁcation technique [10] described in Section 36.2. For directed graphs, we have shown how to achieve constant-time query bounds and nearly-quadratic update bounds for transitive closure and all pairs shortest paths. These bounds are close to optimal in the sense that one update can make as many as Ω(n2 ) changes to the transitive closure and to the all pairs shortest paths matrices. If one is willing to pay more for queries, Demetrescu and Italiano [6] have shown how to break the O(n2 ) barrier on the single-operation complexity of fully dynamic transitive closure for directed acyclic graphs. This also yields the ﬁrst eﬃcient update algorithm that maintains reachability in acyclic directed graphs between two ﬁxed vertices s and t, or from s to all other vertices. However, in the case of general graphs or shortest paths, no solution better that the static

© 2005 by Chapman & Hall/CRC

36-18

Handbook of Data Structures and Applications

is known for these problems. In general, it remains an interesting open problem to show whether eﬀective query/update tradeoﬀs can be achieved for general graphs and for shortest paths problems. Finally, dynamic algorithms for other fundamental problems such as matching and ﬂow problems deserve further investigation.

Acknowledgment This work has been supported in part by the IST Programmes of the EU under contract numbers IST-1999-14186 (ALCOM-FT) and IST-2001-33555 (COSIN), and by the Italian Ministry of University and Scientiﬁc Research (Project “ALINWEB: Algorithmics for Internet and the Web”).

References [1] G. Ausiello, G. F. Italiano, A. Marchetti-Spaccamela, and U. Nanni. Incremental algorithms for minimal length paths. Journal of Algorithms, 12(4):615–38, 1991. [2] S. Baswana, R. Hariharan, and S. Sen. Improved decremental algorithms for transitive closure and all-pairs shortest paths. In Proc. 34th ACM Symposium on Theory of Computing (STOC’02), pages 117–123, 2002. [3] V. Chv´atal. A greedy heuristic for the set-covering problem. Mathematics of Operations Research, 4(3):233–235, 1979. [4] D. Coppersmith and S. Winograd. Matrix multiplication via arithmetic progressions. Journal of Symbolic Computation, 9, 1990. [5] T. H. Cormen, C. E. Leiserson, R. L. Rivest, and C. Stein. Introduction to Algorithms, Second Edition. The MIT Press, 2001. [6] C. Demetrescu and G. F. Italiano. Fully dynamic transitive closure: Breaking through the O(n2 ) barrier. In Proc. of the 41st IEEE Annual Symposium on Foundations of Computer Science (FOCS’00), pages 381–389, 2000. [7] C. Demetrescu and G. F. Italiano. Fully dynamic all pairs shortest paths with real edge weights. In Proc. of the 42nd IEEE Annual Symposium on Foundations of Computer Science (FOCS’01), Las Vegas, Nevada, pages 260–267, 2001. [8] C. Demetrescu and G. F. Italiano. A new approach to dynamic all pairs shortest paths. In Proc. 35th Symp. on Theory of Computing (STOC’03), 2003. [9] E. W. Dijkstra. A note on two problems in connexion with graphs. Numerische Mathematik, 1:269–271, 1959. [10] D. Eppstein, Z. Galil, G. F. Italiano, and A. Nissenzweig. Sparsiﬁcation – A technique for speeding up dynamic graph algorithms. J. Assoc. Comput. Mach., 44:669–696, 1997. [11] S. Even and H. Gazit. Updating distances in dynamic graphs. Methods of Operations Research, 49:371–387, 1985. [12] J. Fakcharoemphol and S. Rao. Planar graphs, negative weight edges, shortest paths, and near linear time. In Proc. of the 42nd IEEE Annual Symposium on Foundations of Computer Science (FOCS’01), Las Vegas, Nevada, pages 232–241, 2001. [13] G. N. Frederickson. Data structures for on-line updating of minimum spanning trees. SIAM J. Comput., 14:781–798, 1985. [14] G. N. Frederickson. Ambivalent data structures for dynamic 2-edge-connectivity and k smallest spanning trees. SIAM J. Comput., 26(2): 484–538, 1997. [15] D. Frigioni, A. Marchetti-Spaccamela, and U. Nanni. Semi-dynamic algorithms for maintaining single source shortest paths trees. Algorithmica, 22(3):250–274, 1998.

© 2005 by Chapman & Hall/CRC

Dynamic Graphs

36-19

[16] D. Frigioni, A. Marchetti-Spaccamela, and U. Nanni. Fully dynamic algorithms for maintaining shortest paths trees. Journal of Algorithms, 34:251–281, 2000. [17] Z. Galil and G. F. Italiano. Fully-dynamic algorithms for 2-edge connectivity. SIAM J. Comput., 21:1047–1069, 1992. [18] D. H. Greene and D. E. Knuth. Mathematics for the analysis of algorithms. Birkh¨ auser, 1982. [19] M. R. Henzinger and V. King. Maintaining minimum spanning trees in dynamic graphs. In Proc. 24th Int. Colloquium on Automata, Languages and Programming (ICALP 97), pages 594–604, 1997. [20] M. R. Henzinger and V. King. Randomized fully dynamic graph algorithms with polylogarithmic time per operation. J. Assoc. Comput. Mach., 46(4):502–536, 1999. [21] M. R. Henzinger, P. Klein, S. Rao, and S. Subramanian. Faster shortest-path algorithms for planar graphs. Journal of Computer and System Sciences, 55(1):3–23, August 1997. [22] J. Holm, K. de Lichtenberg, and M. Thorup. Poly-logarithmic deterministic fullydynamic algorithms for connectivity, minimum spanning tree, 2-edge, and biconnectivity. J. Assoc. Comput. Mach., 48(4):723–760, 2001. [23] S. Khanna, R. Motwani, and R. H. Wilson. On certiﬁcates and lookahead on dynamic graph problems. In Algorithmica 21(4): 377-394 (1998). [24] V. King. Fully dynamic algorithms for maintaining all-pairs shortest paths and transitive closure in digraphs. In Proc. 40-th Symposium on Foundations of Computer Science (FOCS 99), 1999. [25] V. King and G. Sagert. A fully dynamic algorithm for maintaining the transitive closure. In Proc. 31-st ACM Symposium on Theory of Computing (STOC 99), pages 492–498, 1999. [26] P. Loubal. A network evaluation procedure. Highway Research Record 205, pages 96–109, 1967. [27] L. Lov´asz. On the ratio of optimal integral and fractional covers. Discrete Mathematics, 13:383–390, 1975. [28] I. Munro. Eﬃcient determination of the transitive closure of a directed graph. Information Processing Letters, 1(2):56–58, 1971. [29] J. Murchland. The eﬀect of increasing or decreasing the length of a single arc on all shortest distances in a graph. Technical report, LBS-TNT-26, London Business School, Transport Network Theory Unit, London, UK, 1967. [30] G. Ramalingam and T. Reps. An incremental algorithm for a generalization of the shortest path problem. Journal of Algorithms, 21:267–305, 1996. [31] G. Ramalingam and T. Reps. On the computational complexity of dynamic graph problems. Theoretical Computer Science, 158:233–277, 1996. [32] M. Rauch. Fully dynamic biconnectivity in graphs. In Algorithmica, 13:503-538, 1995. [33] V. Rodionov. The parametric problem of shortest distances. U.S.S.R. Computational Math. and Math. Phys., 8(5):336–343, 1968. [34] L. Roditty. A faster and simpler fully dynamic transitive closure. In Proceedings of the 14th ACM-SIAM Symposium on Discrete Algorithms (SODA’03), pages 404–412, Baltimore, Maryland, USA, January 12-14, 2003. [35] L. Roditty and U. Zwick. Improved dynamic reachability algorithms for directed graphs. In Proceedings of the 43th Annual IEEE Symposium on Foundations of Computer Science (FOCS’02), p. 679, Vancouver, Canada, 2002. [36] H. Rohnert. A dynamization of the all-pairs least cost problem. In Proc. 2nd Annual Symposium on Theoretical Aspects of Computer Science, (STACS 85), LNCS 182, pages 279–286, 1985.

© 2005 by Chapman & Hall/CRC

36-20

Handbook of Data Structures and Applications

[37] J. D. Ullman and M. Yannakakis. High-probability parallel transitive-closure algorithms. SIAM Journal on Computing, 20(1):100–125, 1991. [38] U. Zwick. All pairs shortest paths in weighted directed graphs - exact and almost exact algorithms. In Proc. of the 39th IEEE Annual Symposium on Foundations of Computer Science (FOCS’98), pages 310–319, Los Alamitos, CA, November 8–11 1998.

© 2005 by Chapman & Hall/CRC

37 Succinct Representation of Data Structures 37.1 37.2 37.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bitvector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Succinct Dictionaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indexable Dictionary Dynamic Dictionary

37.4

•

Fully Indexable Dictionary

37.5 37.6 37.7

J. Ian Munro University of Waterloo

S. Srinivasa Rao University of Waterloo

37.1

•

Cardinal Trees

37-7

•

Graph Representations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-12 Succinct Structures for Indexing . . . . . . . . . . . . . . . . . 37-12 Permutations and Functions . . . . . . . . . . . . . . . . . . . . . . 37-14 Permutations

37.8 37.9

•

Tree Representations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Binary Trees • Ordinal Trees Dynamic Binary Trees

37-1 37-2 37-4

•

Functions

Partial Sums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-16 Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-17 Resizable Arrays

•

Dynamic Arrays

37.10 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-19

Introduction

Although computer memories, at all levels of the hierarchy, have grown dramatically over the past few years, increased problem sizes continues to outstrip this growth. Minimizing space is crucial not only in keeping data in the fastest memory possible, but also in moving it from one level to another, be it from main memory to cache or from a web site around the world. Standard data compression, say Huﬀman code or grammar based code, applied to a large text ﬁle reduces space dramatically, but basic operations on the text require that it be fully decoded. In this chapter we focus on representations that are not only terse but also permit the basic operations one would expect on the underlying data type to be performed quickly. Jacobson [33] seems to have been the ﬁrst to apply the term succinct to such structures; the goal is to use the information-theoretic minimum number of bits and to support the expected operations on the data type in optimal time. Our archetypical example (discussed in Section 37.4) is the representation of a binary tree. Suppose, we would like to support the operations of navigating through a binary tree moving to either child or the parent of the current node, asking the size of the subtree rooted at the current node or giving the unique ‘number’ of the node so that data can be stored in that position of an array. At lg n bits per reference, this adds up to at least 5n lg n bits. However, there are only

37-1

© 2005 by Chapman & Hall/CRC

37-2

Handbook of Data Structures and Applications

2n+1

/(2n + 1) binary trees, so the information-theoretic minimum space is fewer than 2n n bits. Our archetypical data structure is a 2n + o(n)-bit representation that supports the operations noted above, and others, in constant time. We consider a variety of abstract data types, or combinatorial objects, with the goal of producing such succinct data structures. Most, though not all, of the structures we consider are static. In most cases the construction of a succinct data structure from the standard representation is fairly straightforward in linear time. Memory Model: We study the problems under the RAM model with word size Θ(lg n), where n is the input size of the problem under consideration. This supports arithmetic (addition, subtraction, multiplication and division), indexing and bit-wise boolean operations (AND, OR, NOT, XOR etc.) on words, and reading/writing of words from/to the memory in constant time.

37.2

Bitvector

A bitvector provides a simple way to represent a set from any universe that is easily mapped onto [m] ∗ . Membership queries (checking whether a given element from the universe is present in the set) can be answered in constant time (in fact a single bit probe) using a bitvector. Furthermore, one can easily support updates (inserting and deleting elements) in constant time. The most interesting twist on the bitvector came with Jacobson [33] considering two more operations: • rank(i) : return the number of 1s before the position i, and • select(i) : return the position of the i-th 1. As we shall see, these operations are crucial to a number of more complex structures supporting a variety of data types. An immediate use is to support the queries: • predecessor(x) : ﬁnd the largest element y ≤ x in the set S, • successor(x) : ﬁnd the smallest element y ≥ x in the set S. Given a bitvector of length m, Jacobson [33] gave a structure that takes o(m) bits of additional space and supports rank and select operations by making O(lg m) bit probes to the structure. On a RAM with word size Θ(lg m) bits, the structure given by Munro [40] enhanced this structure and the algorithms to support the operations in O(1) time, without increasing the space bound. We brieﬂy describe the details of this structure. The structure for computing rank, the rank directory, consists of the following: • Conceptually break the bitvector into blocks of length lg2 m . Keep a table containing the number of 1s up to the last position in each block. This takes O(m/ lg m) bits of space. • Conceptually break each block into sub-blocks of length 12 lg m . Keep a table containing the number of 1s within the block up to the last position in each sub-block. This takes O(m lg lg m/ lg m) bits. • Keep a precomputed table giving the number of 1s √ up to every possible position in every possible distinct sub-block. Since there O( m) distinct possible blocks, √ and O(lg m) positions in each, this takes O( m lg m lg lg m) bits.

∗ for

positive integers m, [m] denotes the set {0, 1, . . . , m − 1}

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37-3

b/s sub−blocks s

...

...

... b n/b blocks FIGURE 37.1: Two-level rank directory. Thus, the total space occupied by this auxiliary structure is o(m) bits. The rank of an element is, then, simply the sum of three values, one from each table. The structure for computing select uses three levels of directories and is more complex. The ﬁrst one records the position of every (lg m lg lg m)-th 1 bit in the bitvector. This takes O(m/ lg lg m) bits. Let r be the subrange between two values in the ﬁrst directory, and consider the sub-directory for this range. If r ≥ (lg m lg lg m)2 then explicitly store the positions of all ones, which requires O(r/ lg lg m) bits. Otherwise, subdivide the range and store the position (relative to the beginning of this range) of every (lg r lg lg m)-th one bit in the second level directory. This takes O(r/ lg lg m) bits for each range of size r, and hence O(m/ lg lg m) bits over the entire bitvector. After one more level of similar range subdivision, the range size will reduce to at most (lg lg m)4 . Computing select on these small ranges is performed using a precomputed table. The total space occupied by this auxiliary structure is o(m) bits. The query algorithm is straightforward. See [9, 44] for details. This ‘indexable bitvector’ is used as a substructure in several succinct data structures. To represent a bitvector of length m, it takes m + o(m) bits of space. In general, if nothing is known about the bitvector then any representation needs at least m bits to distinguish between all possible bitvectors, and hence this is close to the optimal space. But if we also know the density (the number of ones) of the bitvector, then the space bound is no longer optimal, in general. The ‘fully indexable dictionary’ described in Section 37.3.2 gives a solution that takes nearly optimal space. Using the ideas involved in constructing rank and select directories, one can also support the following generalizations of these two operations, using o(m) bits of extra space: Given a bitvector of length m, and a ﬁxed binary pattern p of length up to (1 − ) lg m, for some ﬁxed constant 0 < < 1 • rankp (i) : return the number of (possibly overlapping) occurrences of p before the position i, and • selectp (i) : return the i-th occurrence of the pattern p. One can extend the ideas of rank and select directories to support indexing into a ﬁxed or variable length encoded text (e.g. Huﬀman coding, preﬁx-free encoding etc.) in constant

© 2005 by Chapman & Hall/CRC

37-4

Handbook of Data Structures and Applications

time, using negligible extra space. See [33, 44] for some examples.

37.3

Succinct Dictionaries

The (static) dictionary problem is to store a subset S of size n so that membership queries can be answered eﬃciently. In our case, the universe is taken to be the set [m]. This problem has been widely studied and various solutions have been proposed to support membership queries in constant time. As we have seen in the last section, a bitvector is a simple way of representing a set m from a given universe. But this requires m bits of space. Since there are sets of size n n (≈ n(lg m − lg n + lg e), when from a universe of size m, one would require only B ≡ lg m n n = o(m)) bits to store a canonical representation of any such set. Thus a bitvector is quite wasteful of space when the set is sparse. A sorted array is another simple representation, but it requires Θ(lg n) time to answer queries. A fusion tree (see Chapter 39) also takes linear space and supports membership queries in Θ(lg n/ lg lg n) time. In this section, we consider representations of sets whose space complexity is close to the information theoretic minimum and support queries in constant time. (As all the structures outlined below support membership queries in worst case constant time, we do not mention the query complexity explicitly.) Fredman, Koml´os and Szemer´edi [19] gave√the ﬁrst linear space structure for the static dictionary problem. This takes n lg m + O(n lg n + lg lg m) bits of space. The lower order term was later improved by Schmidt and Siegel [55] to O(n + lg lg m). This structure uses a universe reduction function followed by a two-level hash function to hash the given subset one-to-one onto the set [n], and stores the elements of subset in a hash table (in the order determined by the hash function). The hash table takes n lg m bits and a clever encoding of the hash function takes O(n + lg lg m) bits of space. We refer to this as the FKS hashing scheme. Note that the space required for this structure is Θ(n lg n) bits more than the optimal bound of B bits. Brodnik and Munro [5] gave a static dictionary representation that takes B + o(B) bits of space. It uses two diﬀerent solutions depending on the relative values of n and m. When the set is relatively sparse (namely, when n ≤ m/(lg m)lg lg m ), it partitions the elements into buckets based on the ﬁrst lg n − lg lg m bits of their bit representations, and store explicit pointers to refer to the representations of individual buckets. Each bucket is represented by storing all the elements that fall into it in a perfect hash table for that bucket. Otherwise, when the set is dense, it uses two levels of bucketing (at each level splitting the universe into a number of equal-range buckets, depending only on the universe size) after which the range of these buckets reduces to Θ(lg n). These small buckets are stored (almost) optimally by storing pointers into a precomputed table that contains all possible small buckets. In either case the space occupancy can be shown to be B + o(B) bits. Pagh [46] observed that each bucket of the hash table may be resolved with respect to the part of the universe hashing to that bucket. Thus, one can save space by compressing the hash table, storing only the quotient information, rather than the element itself. From the FKS hash function, one can obtain a quotienting function that takes lg(m/n) + O(1) bits for each element. Using this idea one can obtain a dictionary structure that takes n lg(m/n) + O(n + lg lg m) bits of space, which is only Θ(n) bits more than the informationtheoretic lower bound (except for the O(lg lg m) term). Pagh has also given a dictionary structure that takes only B + o(n) + O(lg lg m) bits of space.

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37.3.1

37-5

Indexable Dictionary

One useful feature of the sorted array representation of a set is that, given an index i, the i-th smallest element in the set can be retrieved in constant time. Furthermore, when we locate an element in the array, we immediately know its rank (the number of elements in the set which are less than the given element). On the other hand, hashing based schemes support membership in constant time, but typically do not maintain the ordering information. In this section we look at a structure that combines the good features of both these approaches. An indexable dictionary is a structure representing a set S of size n from the universe [m] to support the following queries in constant time: rank(x, S): Given x ∈ [m], return −1 if x ∈ S, and |{y ∈ S|y < x}| otherwise, and select(i, S): Given i ∈ {1, . . . n}, return the i-th smallest element in S. Here the rank operation is only supported for the elements present in the set S. Ajtai [1] showed that the more general problem of supporting rank for every element in the universe has a query lower bound of Ω(lg lg n), even if the space used is polynomial in n. As a consequence, we emphasize the need for handling both S and its complement in the next section. A dictionary that supports rank operation [52], as well as an indexable dictionary is very useful in representing trees [50] (see Section 37.4.3). Elias [15] considered the indexable dictionary problem and gave a representation that takes n lg m − n lg n + O(n) bits and supports the queries in O(1) time, though he only considered the average case time complexity of the queries. Raman et al. [50] have given an indexable dictionary structure that takes B + o(n) + O(lg lg m) bits. The main idea here is, again, to partition the elements into buckets based on their most signiﬁcant bits, as in the static dictionary structure of Brodnik and Munro [5]. The diﬀerence is that instead of storing explicit pointers to the bucket representations, they store the bucket sizes using a succinct representation that supports partial sum queries (see Section 37.8) in constant time. This not only saves a signiﬁcant amount of space, but also provides the extra functionality needed for supporting rank and select. Using similar ideas, one can also represent multisets and collections of sets using almost optimal space. See [50] for details.

37.3.2

Fully Indexable Dictionary

Given a set S ⊆ [m], a fully indexable dictionary (FID) of S is a representation that supports rank and select operations on both S and its complement S¯ = [m] \ S in constant time [50]. It is easy to see that the bitvector representation of a set, with auxiliary structures to support rank and select on both the bits as mentioned in Section 37.2, is an FID. But this requires m + o(m) bits, where m is the size of the universe. Here we look at an FID representation that takes B +o(m) bits of space. Note that when the set is reasonably sparse (namely when n = m/ω(lg m)) B = o(m), and hence it improves the space complexity of the bitvector representation. Let S ⊆ [m] be a given set of size n. Divide [m] into blocks of consecutive elements, with block size u = 12 lg m . Let Si be the subset of S that falls into the i-th block. Each of the Si ’s is represented by storing an index into a table that contains the characteristic bitvectors of all possible subsets of a particular size from the universe [u]. As a consequence, the space occupied by these representations together with all the precomputed tables can be shown to be B + o(m) bits. To enable fast access to the representations of these subsets, we store the partial sums of the sizes of the subsets, and also the partial sums of the lengths

© 2005 by Chapman & Hall/CRC

37-6

Handbook of Data Structures and Applications

of the representations of these subsets, which take O(m lg lg m/ lg m) bits. This can be used to support rank in O(1) time. To support select, we ﬁrst store the positions of every (lg2 m)-th element explicitly in an array, which takes O(m/ lg m) bits. Call the part the universe that lies between two successive elements in this array a segment. If the size of a segment is more than lg4 m, then we explicitly store all the lg2 m elements of S that belong to this segment in sorted order. This takes lg3 m bits for every such ‘sparse’ segment, and hence at most m/ lg m bits, over all the sparse segments. Dense segments are handled by constructing a complete √ tree with branching factor lg m, and so constant height, whose leaves are the blocks that constitute this segment, and storing some additional information to navigate this tree eﬃciently (see the searchable partial sum structure in Section 37.8). ¯ ﬁrst observe that an implicit representation of a set To support rank and select on S, over a given universe is also an implicit representation of its complement. Thus, we need not store the implicit representations of S¯i again. Except for this, we repeat the above construction with Si ’s replaced by S¯i ’s. The overall space requirement of the structure is B + O(m lg lg m/ lg m) bits, and rank and select are supported on both S and S¯ in O(1) time. See [50] for details.

37.3.3

Dynamic Dictionary

We have looked at several succinct structures for static dictionaries. We now brieﬂy consider the dynamic dictionary problem where one can add and delete elements from the set while supporting the membership queries. Model: The model of memory allocation is very important in dynamic data structures. One widely used model [4, 45, 50] is to assume the existence of a ‘system’ memory manager that would allocate and free memory in variable-sized chunks. In this model, the space complexity of a structure is counted as the total size of all the blocks allocated for that structure, and hence this approach does not account for the space wastage due to external fragmentation. Fundamentally, memory is most easily viewed as a large array. If we are to use the storage, we must manage it. Therefore a simple view is to count all the fragmentation we may cause and count the memory usage as the diﬀerence between the addresses of the ﬁrst and last locations used by the structure. While more complex scenarios may be more realistic in certain cases, we take this simple address diﬀerence model as our focus. The methods we discuss are equivalent under either model up to constant factors. A balanced tree can be used to support all the dynamic dictionary operations in O(lg n) time using n lg m + O(n lg n) bits, where n is the current size of the set. Using the ideas of the FKS dictionary, Dietzfelbinger et al. [14] gave a dynamic dictionary structure that supports membership in O(1) time and updates (insert/delete) in O(1) expected amortized time. This structure takes O(n lg m) bits of space. There have been several improvements, lowering the space complexity close to the information theoretic-minimum, culminating in a structure that takes B + o(B) bits with the same query complexity as above. See [5, 18, 46, 47, 51] and the references therein. All these structures also support associating satellite information with the elements, so that whenever an element is found to be in the set, we can also retrieve the satellite information associated with it in constant time.

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37.4

37-7

Tree Representations

Trees are one of the most fundamental objects in computer science. We consider the problem of representing large trees succinctly. Storing a tree with a pointer per child as well as other structural information can account for the dominant storage cost. For example, standard representations of a binary tree on n nodes, using pointers, take O(n lg n) bits of space. Since there are only 2n+1 /(2n + 1) diﬀerent binary trees on n nodes, less than 2n bits n suﬃce to distinguish between them. We look at some binary tree representations that take 2n + o(n) bits and support the basic navigational operations in constant time.

37.4.1

Binary Trees

First, if the tree is a complete binary tree (i.e., a binary tree in which every level, except possibly the deepest, is completely ﬁlled, and the last level is ﬁlled from the left as far as required), then there is a unique tree of a given size and we require no additional space to store the tree structure. In fact, by numbering the nodes from 1 to n in the ‘heap order’ [59] (left-to-right level-order traversal of the tree), one can support navigational operations on the tree by observing that the parent of a node numbered i is the node numbered i/2 , and the left and right children of node i are 2i and 2i + 1 respectively. But this property does not hold when the tree is not complete. If the tree is not complete, one could extend it to a complete binary tree with the same height and store a bit vector indicating which nodes are present in the tree (in the heap order of the complete tree) to support the operations eﬃciently. But this takes space exponential in the number of nodes, in the worst case. To save space, one can use the following compressed representation due to Jacobson [33]: First, mark all the nodes of the tree with 1 bits. Then add external nodes to the tree, and mark them with 0 bits. Construct a bitvector by reading oﬀ the bits that are marking the nodes in left-to-right level-order. (See Figure 37.2.) It is easy to see that the original tree can be reconstructed from this bitvector. For a binary tree with n nodes, this bitvector representation takes 2n + 1 bits. Moving between parent and child is just a slight twist on the method used in a heap. By storing the rank and select directories for this bitvector, one can support the navigational operations in constant time using the following equations: parent(i) = select( i/2 );

37.4.2

leftchild(i) = 2 · rank(i);

rightchild(i) = 2 · rank(i) + 1.

Ordinal Trees

Now, consider optimal representations of trees of higher degree, of which there are two diﬀerent notions. An ordinal tree is a rooted tree of arbitrary degree in which the children of each node are ordered. Ordinal trees on n nodes are in one to one correspondence with binary trees on n nodes. Hence about 2n bits are necessary to represent an arbitrary ordinal tree on n nodes. A cardinal tree of degree k is a rooted tree in which each node has k positions for an edge to a child. Hence, a binary tree is a cardinal tree of degree 2. There are Cnk ≡ kn+1 /(kn + 1) n k cardinal trees of degree k on n nodes [25]. Hence we need roughly (lg(k − 1) + k lg k−1 )n bits to represent an arbitrary such tree. The basic operations we would like to support on tree representations are: given a node, ﬁnding its parent, i-th child, degree and the size of the subtree rooted at that node (subtree size). For the cardinal trees we also need to support the additional operation of ﬁnding a child with a given label.

© 2005 by Chapman & Hall/CRC

37-8

Handbook of Data Structures and Applications

1(1) 2(2)

3(3)

4(4) 8(6)

12

9(7) 13 18

14(9)

5

6

7(5) 10(8) 11

15

16

17

19

level−order bitmap: 1 1 1 1 0 0 1 1 1 1 0 0 0 1 0 0 0 0 0 FIGURE 37.2: Level-order bitmap representation of a binary tree. We outline three diﬀerent representations of an ordinal tree. All the three representations map the n nodes of the tree onto the integers 1, . . . , n, and hence all are appropriate for applications in which data is to associated with nodes or leaves. Level-order unary degree sequence representation: A rooted ordered tree can be represented by storing its degree sequence in any of a number of standard orderings of the nodes. The ordinal tree encoding of Jacobson [33] represents a node of degree d as a string of d 1s followed by a 0. Thus the degree of a node is represented by a binary preﬁx code. These preﬁx codes are then written in a level-order traversal of the entire tree. Using auxiliary structures to support rank and select operations on this sequence, one can support ﬁnding the parent, the i-th child and the degree of any node in constant time. Thus, it gives a representation that takes 2n + o(n) bits of space and supports the above three operations in constant time, for an ordered tree on n nodes. Balanced parenthesis representation: The tree encoding of Munro and Raman [41] uses a balanced sequence of parentheses to represent an ordinal tree. This balanced representation is derived from the depth-ﬁrst traversal of the tree, writing an open parenthesis on the way down and a close parenthesis on the way up. Thus, a tree on n nodes can be represented by a balanced parenthesis sequence of length 2n. Extending the ideas of Jacobson, they showed how to support the following operations in O(1) time, using negligible extra space (o(n) bits): • ﬁndopen/ﬁndclose(i): ﬁnd the position of the open/close parenthesis matching the given close/open parenthesis in position i. • excess(i): ﬁnd the diﬀerence between the number of open and closing parentheses before the position i. • enclose(i): given a parenthesis pair whose open parenthesis is in position i, ﬁnd the open parenthesis corresponding to its closest enclosing matching parenthesis pair.

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37-9

1110110010111010111101100101000110000 11010000011000 (b) Jacobson’s degree sequence representation. a c

b e h p

d g

f

i q v

j

k

r

s

l

n

m t

o u

((((()())()((()())))((((()())))))()((()()(()())()))) p q i v w c l m t u o y z h r n x j s g e d k f b a

(c) Munro and Raman’s Balanced Parentheses Representation.

x

w

a

y

z

b

e

h pqi j

r vw f k s x yz c d

g

l m n t uo

(((()(()((()(())))()(()))()()()(())))()(((()))(())))

(a) The Ordinal Tree First subtree of ‘a’

Third subtree of ‘a’

Second subtree of ‘a’ (a leaf)

(d) Depth-ﬁrst degree sequence representation.

FIGURE 37.3: Three encodings of an ordinal tree. The parent of a node can be found in constant time using the enclose operation. In the parenthesis representation, the nodes of a subtree are stored together, which enables us to support the operation of ﬁnding the size of the subtree rooted at a given node in constant time. The problem with this representation is that ﬁnding the i-th child takes Θ(i) time. Depth-ﬁrst unary degree sequence representation: Jacobson’s representation allows access to the i-th child in constant time, whereas Munro and Raman’s representation supports subtree size operation in constant time. To combine the virtues of these two representations, Benoit et al. [2] used a representation that writes the unary degree sequence of each node in the depth-ﬁrst traversal order of the tree. The representation of each node contains essentially the same information as in Jacobson’s level-order degree sequence, but written in a diﬀerent order. Thus, it gives another 2n bit encoding of a tree on n nodes. Replacing the 0’s and 1’s by open and close parentheses respectively, and adding an extra open parenthesis at the beginning, creates a string of balanced parentheses. Using auxiliary structures to support rank and select operations on this bit string and also the operations on balanced parenthesis sequences deﬁned above, one can support ﬁnding the parent, i-th child, degree and subtree size of a given node in constant time. Other operations: Sadakane [54] has shown that the parenthesis representation of an ordinal tree can be used to support least common ancestor queries in O(1) time using a o(n)-bit auxiliary structure. Munro and Rao [42] have shown that one can also support the level ancestor queries in O(1) time, using an additional o(n) bit auxiliary structure by storing the parenthesis representation. Geary et al. [23] obtained another structure that takes 2n + o(n) bits and supports level-ancestor queries, in addition to all the other

© 2005 by Chapman & Hall/CRC

37-10

Handbook of Data Structures and Applications

navigational operations mentioned above in O(1) time.

37.4.3

Cardinal Trees

A simple cardinal tree encoding can be obtained as follows: Encode each node of a k-ary tree by k bits, where the ith bit speciﬁes whether child i is present. These can be written in any ﬁxed ordering of the tree nodes, such as level order or depth-ﬁrst order, to obtain the tree encoding. By storing the rank and select directories for this bitvector encoding, one can support parent, i-th child and degree queries in constant time. This encoding has the major disadvantageof taking kn bits, far from the lower bound of roughly (lg k + lg e)n bits, as there are Cnk ≡ kn+1 /(kn + 1) k-ary cardinal trees on n nodes. n Using some probabilistic assumptions, Darragh et al. [11] have implemented a structure that takes lg k + O(1) bits per node, though the implementation treats lg lg n as ‘a constant’ (indeed 5). This structure supports the navigational operations in constant expected time and also supports updates ‘eﬃciently’ (compared with other linear space representations), and was also shown to perform well in practice. To achieve a better space bound with good worst-case performance, one can use the ordinal tree encoding to store the underlying tree, and store some additional information about which children are present at each node. The ordinal information (using the depthﬁrst unary degree sequence representation) can be used to support the parent, i-th child, degree and subtree size queries in constant time. Let Sx = {i1 , i2 , . . . , id } be the child labels of a node x with degree d in the cardinal tree. To ﬁnd the child labeled j of node x, it suﬃces to ﬁnd i = rank(j) in the set Sx , if j ∈ Sx . If i = −1 (i.e., j ∈ Sx ), then there is no child labeled j at node x, otherwise the i-th child of x is the child labeled j of node x. The i-th child can be found using the ordinal information. Storing each of these sets Sx using the indexable dictionary representation of Section 37.3.1, which takes d lg k + o(d) + O(lg lg k) bits for each Sx , requires n lg k + o(n) + O(n lg lg k) bits in the worst case. Using a representation that stores a collection of indexable dictionaries eﬃciently [50], one can reduce the space consumption to n lg k + o(n) + O(lg lg k) bits. Thus, this structure uses 2n + o(n) bits to represent the underlying ordinal tree, n lg k + o(n + lg k) bits to represent the labels of the children at each node, and supports all the navigational operations and the subtree size operation in O(1) time. Using the succinct indexable dictionary structure mentioned in Section 37.3, Raman et al. [50] obtained an optimal space cardinal tree representation. The main idea is to store the set of all pairs, i, j such that the i-th node, in the level-order of the nodes, has a child labeled j, using an indexable dictionary representation. (See Figure Since 37.4 for an example.) k this set is of size n from the universe [nk], it requires lg nk n + o(n + lg k) = Cn + o(n + lg k) bits to store an indexable dictionary for this set. One can easily map the navigational operations on the tree to the operations on this set, to support them in constant time. But this structure does not support the subtree size operation eﬃciently.

37.4.4

Dynamic Binary Trees

All the tree representations mentioned so far are static. Even to make a minor modiﬁcation to the tree, such as adding a leaf, the entire structure has to be reconstructed (in the worst case). In this section we look at some representations that are more eﬃcient in supporting updates to the tree. Munro et al. [45] gave a binary tree representation that takes 2n+o(n) bits, and supports parent, left child, right child and subtree size operations in O(1) time. Updating the tree (adding a leaf or adding a node along an edge) requires O(lgc n) time, for some constant

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37-11

0 0

2

1

3

2 3

1 4

1 5

0

3

6

1

7

8

FIGURE 37.4: The tree is represented by storing an indexable dictionary of the set {0, 0 , 0, 2 , 0, 3 , 1, 1 , 1, 3 , 2, 1 , 5, 0 , 5, 1 }.

B

S

S

B

B

B

S

B

B

S

S

S

S

FIGURE 37.5: Dynamic binary tree representation. B denotes an inter-block pointer and S denotes an inter-subblock pointer. c ≥ 1 which depends on the size of the data associated with the nodes. Extending some of the ideas involved in this, Raman and Rao [51] improved the update time to O((lg lg n) ), for any ﬁxed > 0, while maintaining the other time and space bounds. We brieﬂy outline the key issues involved in the construction of these structures. First, we divide the tree into blocks of size Θ(lgc n), for some c ≥ 2, and each block in turn into sub-blocks of size lg n, for some ﬁxed < 1. The sub-blocks are stored using an implicit representation and are operated upon using precomputed tables. The block structure of the tree is stored using explicit pointers. Since there are only Θ(lgc−1 n) sub-blocks in each block, we can store the sub-block structure within a block explicitly using Θ(lg lg n) sized pointers. Each block stores its parent block and the size, using a constant number of words. Thus, the overall block structure of the tree is easily handled by conventional means (storing explicit pointers) and only takes O(n/ lg n) bits. The blocks and sub-blocks tolerate some slack in their sizes and are moved to appropriate sized areas to avoid wasting space. Ultimately, the key issues boil down to the memory management. To support subtree size, we maintain the the subtree sizes of the roots of all blocks and

© 2005 by Chapman & Hall/CRC

37-12

Handbook of Data Structures and Applications

sub-blocks. Since each update changes the subtree sizes of several nodes, it is not possible to update all the eﬀected blocks and sub-blocks in constant time, in general. For this reason, we assume that the navigation through the tree begins at the root and may end at any point (or at the root, to achieve worst-case constant time for updates), and navigates the tree by moving from a node only to either its parent or one of its children. Hence, updates to a node higher in the tree regarding the insertions and deletions to descendants are made on return to that node.

37.5

Graph Representations

In this section, we brieﬂy describe some space eﬃcient representations of graphs. In particular, we consider representations that take close to the information theoretic minimum space and support degree and adjacency queries eﬃciently. A degree query asks for the degree of a given node in the graph, and an adjacency query asks whether two given vertices are adjacent or not in the graph. In addition, we would also like to support listing all the vertices adjacent to a given vertex. Tur´ an [57] gave a linear time constructible representation of an arbitrary planar graph that takes at most 12 bits per node. Though this gives a space eﬃcient representation of planar graphs, it does not support the queries eﬃciently. Kannan et al. [34] have given an implicit (linear space) graph representation that supports adjacency queries using O(lg n) bit probes. Jacobson [33] gave a representation that takes O(n) bits of space to represent a planar graph on n nodes and supports degree and adjacency queries in constant time. It uses a simple mapping of one-page graphs to sequences of balanced parentheses, and the fact that a planar graph always has a 4-page embedding. By storing auxiliary structures to support some natural operations on these sequences (see Section 37.4.2), one can also support the navigational operations in optimal time. Munro and Raman [41] improved the space to 8n + 2m + o(n) bits, for a planar graph on n vertices with m edges, still supporting the queries in constant time. In general, their representation takes 2kn + 2m + o(nk + m) bits to store a k page graph on n vertices and m edges and supports degree and adjacency queries in O(k) time. There have been several improvements [7, 8, 29, 37, 38], improving the space close to the information theoretic-lower bound, simultaneously expanding the class of graphs for which the scheme works. In particular, Lu [38] gave an optimal space (within lower-order terms) representation that can be constructed in linear time. This supports degree and adjacency queries in O(1) time for constant-genus graphs. The main idea is to partition the given graph G on n vertices into o(n/ lg n) disjoint subgraphs of size O(lg 6 n) by removing a subgraph H of size o(n/ lg n). This is done using a ‘planarization algorithm’ for bounded genus graphs, and an algorithm to construct a ‘separator decomposition tree’ of a planar graph. The representation of G is obtained by storing a rerepresentation of H, and recursing on each of the smaller subgraphs upto a constant number of levels, after which one can use a precomputed table to operate on the small subgraphs. See [38] for details.

37.6

Succinct Structures for Indexing

A text index is a data structure storing a text (a string or a set of strings) and supporting string matching queries: given a pattern P , ﬁnd all the occurrences of P in the text. Two

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37-13

well-known and widely used index structures are the suﬃx trees and suﬃx arrays. In this section we brieﬂy describe some succinct data structures for these two. A suﬃx tree for a text is the compressed digital trie of all the suﬃxes of the text [39, 58]. A suﬃx tree for a text of length n has n leaves and at most n − 1 internal nodes. The space bound is a consequence of skipping nodes with only one child, hence there are precisely n − 1 internal nodes if we use a binary trie. Each leaf points to the position in the text of the corresponding suﬃx it represents uniquely. The edges are labeled by substrings of the text, which are usually represented by storing a position in the text where the substring starts and its length. Thus, a standard representation of a suﬃx tree for a text of length n takes O(n lg n) bits. Searching for an occurrence of a pattern of length m using a suﬃx tree takes O(m) time. The suﬃx array of a text is an array storing pointers to the suﬃxes of the text in their lexicographic order. Thus, a suﬃx array for a text of length n takes n lg n bits. Note that the leaf labels of a suﬃx tree written from left to right form the suﬃx array, if the children of each node are arranged in lexicographic order of their edge labels. Searching for an occurrence of a pattern of length m using a suﬃx array takes O(m + lg n) time. We now brieﬂy sketch the ideas involved in representing a suﬃx tree (and hence also a suﬃx array) using O(n) bits. We ﬁrst convert the trie into binary by using a ﬁxed length encoding of the characters of the alphabet. We then store the parenthesis representation of the underlying tree structure (see Section 37.4.2). The edge labels of a suﬃx tree can be omitted, as this can be determined by ﬁnding the longest common preﬁx of the leftmost and rightmost leaves of the parent node (of the edge). The parenthesis representation of an ordinal tree can be augmented with o(n)-bit additional structure to support ﬁnding the leftmost and rightmost leaves of a given node in constant time. Thus, one can use this tree representation to store the tree structure of a suﬃx tree, and store the leaf pointers (suﬃx array) explicitly. This gives a suﬃx tree representation that takes n lg n+ O(n) bits of space and supports indexing queries in optimal time. See [44] for details. The above structure uses n lg n bits to represent the pointers to the text or the suﬃx array. Grossi and Vitter [26] obtained a suﬃx array structure that takes O(n) bits and supports ﬁnding the i-th element in the suﬃx array (lookup queries) in O(lg n) time, for any ﬁxed > 0. Using this structure they also obtained a suﬃx tree representation that takes O(n) bits of space and supports ﬁnding all the s occurrences of a given pattern of length m in O(m+ s lg n) time. The structure given by Rao [53] generalizes the suﬃx array structure of Grossi and Vitter, which takes O(nt(lg n)1/(t+1) ) bits and supports lookup in O(t) time, for any parameter 1 ≤ t ≤ lg lg n. Using this structure, one can get an index structure that takes o(n lg n) bits and supports ﬁnding all the s occurrences of a given pattern of length m in O(m + s + lg n) time. Ferragina and Manzini [16] presented an opportunistic data structure taking O(nHk (n))+ o(n) bits of space, where Hk (n) denotes the k-th order entropy of the given text of length n. This supports ﬁnding all the occurrences of a pattern of length m in O((m + s) lg n) time, where s is the number of occurrences of the pattern. They also presented its practical performance [17]. Sadakane [54] gave a data structure that takes O(n · (1 + H0 ) + O(|Σ| lg |Σ|)) bits for a text of length n over an alphabet Σ, where H0 ≤ lg |Σ| is the order-0 entropy for the text. This supports ﬁnding all the s occurrences of a given pattern P in O(|P | lg n + s lg n) time, and decompress a portion of the text of length l in O(l + lg n) time, for any ﬁxed > 0. Grossi et al. [27] gave another index structure that takes nHk (n) + O(n lg lg n lg |Σ|/ lg n) bits for a text of length n over an alphabet Σ. Finding an occurrence of a pattern of length m using this structure takes O(m lg |Σ| + polylog(n)) time. This is also shown to perform well, in terms of space as well as query times, in practice [28]

© 2005 by Chapman & Hall/CRC

37-14

Handbook of Data Structures and Applications

37.7

Permutations and Functions

37.7.1

Permutations

Permutations are fundamental in computer science and have been the focus of extensive study. Here we consider the problem of representing permutations succinctly to support computing π k (i) for any integer k, where π 0 (i) = i for all i; π k (i) = π(π k−1 (i)) when k > 0 and π k (i) = π −1 (π k+1 (i)) when k < 0. The most obvious way of representing an arbitrary permutation, π, of the integers {0, 1, . . . , n − 1} is to store the sequence π(0), π(1), . . . , π(n − 1). This takes n lg n bits, which is Θ(n) bits more than the information-theoretic lower bound of lg(n!) ≈ n lg n−n lg e bits. This representation can be used to ﬁnd π(i) in O(1) time, but ﬁnding π −1 (i) takes O(n) time in the worst case, for 0 ≤ i ≤ n − 1. Using this representation, one can easily compute π k (i) in k steps, for k ≥ 1. To facilitate the computation in constant time, one could store π k (i) for all i and k (|k| ≤ n, along with its cycle length), but that would require Θ(n2 lg n) bits. The most natural compromise is to retain π k (i) with |k| ≤ n a power of 2. Unfortunately, this n lg n2 bit representation leaves us with a logarithmic time evaluation scheme and a factor of lg n from the minimal space representation. We ﬁrst show how to augment the standard representation to support π −1 queries efﬁciently, while avoiding most of the extra storage cost one would expect. In addition to storing the standard representation, we trace the cycle structure of the permutation, and for every cycle whose length is at least t, we store a shortcut pointer with the elements which are at a distance of a multiple of t steps from an arbitrary starting point. The shortcut pointer points to the element which is t steps before it in the cycle of the permutation. This shortcut representation of a permutation can be stored using (1 + 1/t)n lg n + o(n) bits, and it supports π queries in O(1) time and π −1 queries in O(t) time, for any parameter 1 ≤ t ≤ n. Consider the cycle representation of a permutation π over {0, 1, . . . , n − 1}, which is a collection of disjoint cycles of π (where the cycles are ordered arbitrarily). Let σ be this permutation, i.e., the standard representation of σ is a cycle representation of π. Let B be a bit vector of length n that has a 1 corresponding to the starting position of each cycle of π and 0 everywhere else, together with its rank and select directories with respect to both bits. Let S be a representation of σ that supports σ(i) and σ −1 (i) queries eﬃciently. Then to ﬁnd π k (i), ﬁrst ﬁnd the index j of the cycle to which σ −1 (i) belongs, using B and S. Find the length l of the j-th cycle and the number p of elements up to (but not including) the j-th cycle. Then, one can verify that π k (i) = σ(p + (i − p + k mod l)). Combining this with the shortcut representation, one can get a representation taking (1 + )n lg n + O(1) bits that supports computing arbitrary powers in O(1) time. Benes network: A Benes network [36] is a communication network composed of a number of switches. Each switch has 2 inputs x0 and x1 and 2 outputs y0 and y1 and can be conﬁgured either so that x0 is connected to y0 (i.e. a packet that is input along x0 comes out of y0 ) and x1 is connected to y1 , or the other way around. An r-Benes network has 2r inputs and outputs, and is deﬁned as follows. For r = 1, the Benes network is a single switch with 2 inputs and 2 outputs. An (r + 1)-Benes network is composed of 2r+1 switches and two r-Benes networks, connected as as shown in Fig. 37.6(a). A particular setting of the switches of a Benes network realizes a permutation π if a packet introduced at input i comes out at output π(i), for all i. See Fig. 37.6(b) for an example. Clearly, a Benes network may be used to represent a permutation. For example, if n = 2r , a representation of a permutation π on [n] may be obtained by conﬁguring an r-Benes network to realize π and then listing the settings of the switches in some canonical

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

r−Benes network

r−Benes network

(a)

37-15 0 1

2 4

2 3

6

4

0 5

7

5

3

6 7

1 (b)

FIGURE 37.6: Benes network: (a) construction of (r + 1)-Benes network (b) Benes network realizing the permutation (4, 7, 0, 6, 1, 5, 2, 3). order (e.g. level-order). This represents π using r2r − 2r−1 = n lg n − n/2 bits. Given i, one can trace the path taken by a packet at input i by inspecting the appropriate bits in this representation, and thereby calculate π(i) in O(lg n) time (indeed, in O(lg n) bit-probes). In fact, by tracing the path back from output i we can also compute π −1 (i) in O(lg n) time. One can compress the middle levels of a Benes network by storing an implicit representation of the permutation represented by the middle O(lg n/ lg lg n) levels. This reduces the space to lg(n!)+ o(n) bits. One can also group the remaining bits of this Benes network into words of size Θ(lg n) bits (by taking O(lg lg n) consecutive levels and O(lg lg n) appropriate rows). This enables us to traverse Θ(lg lg n) levels in a Benes network in O(1) time. Thus, it gives a representation that takes the optimal lg(n!) + o(n) bits, and supports computing arbitrary powers in O(lg n/ lg lg n) time. One can obtain a structure with same time and space bounds even when n is not a power of 2. See [43] for details.

37.7.2

Functions

Now consider the problem of representing arbitrary functions f : [n] → [n], so that queries for f k (i), for any integer k can be answered eﬃciently. Here f 0 (i) = i and for any k > 0, f k (i) = f (f k−1 (i)) and f −k (i) = {j|f k (j) = i}, for all i. This is a generalization of the problem considered in the previous section. Since there are nn functions from [n] to [n], any representation scheme takes at least n lg n bits to store an arbitrary function. A standard way of representing a function is to store the sequence f (i), for i = 0, . . . , n−1. This representation does not support the eﬃcient evaluation of f k (i) for k >> 1. We look at a representation that takes (1 + )n lg n + O(1) bits of space to store a function f : [n] → [n] and supports computing arbitrary positive powers in constant time and negative powers f −k (i), in O(1 + |f −k (i)|) time. Given an arbitrary function f : [n] → [n], consider the directed graph, Gf = (V, E), obtained from it, where V = [n] and E = {(i, j) : f (i) = j}. In general this directed graph consists of a disjoint set of subgraphs, each of which is a directed cycle with trees rooted at the nodes on the cycle and edges directed towards the roots. See Figure 37.7 for an example. The main idea of the solution is as follows: in each directed cycle, we re-order the nodes

© 2005 by Chapman & Hall/CRC

37-16

Handbook of Data Structures and Applications 10

12 15

5 0

18

17

3

2

1

4

14

7

16

13 9

8 6

11

FIGURE 37.7: Graph representation of the function f (x) = (x2 + 2x − 1) mod 19, for 0 ≤ x ≤ 18. of each tree such that the leftmost path of any subtree is the longest path in that subtree. This enables ﬁnding a node at a given depth from any internal node, if it exists, in constant time using the parenthesis representation. We then preprocess each of the trees and store auxiliary structures to support level-ancestor queries on them in constant time (see Section 37.4.2). Observe that ﬁnding f k (i), for k > 0, can be translated to ﬁnding the ancestor of node i which is k levels above it, if i is at a depth at least k in its tree T . Otherwise, we have to traverse the cycle to which the root of T belongs, to ﬁnd the required answer. This can be done by storing these cycles as a permutation. When i belongs to one of the trees in a subgraph, one can answer f k (i) queries for k < 0 in optimal time by ﬁnding all the nodes that are at the k-th level in the subtree rooted at i. Otherwise, if i is part of the cycle in the subgraph, we store an auxiliary structure that, for any given i and k, outputs all the trees in the subgraph containing i that have an answer in time proportional to the number of such nodes. From this, one can easily ﬁnd the required answer in optimal time. The auxiliary structure takes O(m) bits for a subgraph with m nodes, and hence O(n) bits overall. See [42] for details. For functions from [n] → [m] one can show the following: If there is a representation of a permutation that takes P (n) space to represent a permutation on [n] and supports forward in t1 time and inverse in t2 time, then there is a representation of a function from [n] to [m], m ≤ n that takes (n − m) lg m + P (m) + O(m) bits, and supports f k (i) in O(t1 + t2 ) time, for any positive integer k and for any i ∈ [n]. When m > n, larger powers are not deﬁned in general. In this case, we can have a structure that takes n lg m + P (n) + O(n) bits of space and answers queries for positive powers (returns the power if deﬁned or returns −1 otherwise) in O(t1 + t2 ) time.

37.8

Partial Sums

Let a1 , a2 , . . . , an be a sequence of n non-negative k-bit numbers. The partial sums problem maintains the sequence under the following operations: i • sum(i): return j=1 aj , • update(i, δ): set ai ← ai + δ, for some integer δ such that 0 ≤ ai + δ ≤ 2k − 1. Our later solutions have the additional constraint that |δ| ≤ lgO(1) n.

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37-17

Dietz [13] gave a structure for the partial sum problem that supports sum and update in O(lg n/ lg lg n) time using O(n lg n) bits of extra space, for the case when k = Θ(lg n) and no constraints on δ. The time bounds are optimal due to the lower bound of Fredman and Saks [20]. As the information-theoretic space lower bound is kn bits, this structure uses space within a constant factor of the optimal. The main idea of this structure is to store the elements at the leaves of a complete tree with branching factor O(lg n) for some < 1. The operations are performed by traversing a path from a leaf to the root, querying/updating the nodes along the path. The searchable partial sums problem is an extension of the partial sums problem that also supports the following operation: • search(j): ﬁnd the smallest i such that sum(i) ≥ j. When k = 1 (i.e., each element is a bit), the special case is commonly known as the dynamic bit vector problem, which maintains a bit vector of length n under rank, select and ﬂip (update) operations. For the searchable partial sums problem there is a structure that supports all operations in O(lg n/ lg lg n) time, and uses kn + o(kn) bits of space [49]. For k = O(lg lg n), one can also obtain a structure that again takes kn + o(kn) bits and supports sum and search in O(logb n) time and update in O(b) amortized time, for any parameter b ≥ lg n/ lg lg n [30]. For the partial sums problem, one can support the above trade-oﬀ for k = O(lg n) [49], and the time bounds can be shown to be optimal [20]. For the dynamic bit vector problem, one can support rank and select in O(logb n) time and ﬂip in O(b) (worst-case) time, for any parameter lg n/ lg lg n ≤ b ≤ n, using o(n) bits of extra space. One can also extend the above trade-oﬀ for k = O(lg lg n), using kn + o(kn) bits of space. See [49] and [30] for details.

37.9 37.9.1

Arrays Resizable Arrays

A basic problem that arises in many applications is accumulating elements into a list when the number of elements is unknown ahead of time. The operations needed from such a structure are the ability to append elements to the end of the structure, removing the last element from the structure (in applications such as implementing a stack) and some method of accessing the elements currently in the structure. One simple solution is a linked list which can easily grow and shrink, and supports sequential access. But this does not support random access to the elements. Moreover, its space overhead is O(n) pointers to store n elements. Another standard solution is the doubling technique [3]. Here the elements are stored in an array. Whenever the array becomes full, an array of double its size allocated and all the elements are copied to it. Similarly, whenever the array shrinks so that it is only one-fourth full, an array of half its size is allocated and all the elements are copied to it. The advantage of this solution over the linked lists is that random access to the elements takes only O(1) time (as opposed to O(n) for linked lists). The amortized update time is O(1), though the worst-case update time is O(n). The space overhead of this solution is O(n). √ Sitarski [56] has proposed a solution whose space overhead is only O( n). The idea is to √ divide the given list of n elements√into sublists of size n, store them in separate arrays, and store an array (of length O( n)) of pointers to these sublists (in order). Whenever

© 2005 by Chapman & Hall/CRC

37-18

Handbook of Data Structures and Applications

√

n changes, the entire structure is reconstructed with the new size. Thus the amortized update time is O(1) (though the worst-case time is O(n)). This also supports random access in O(1) time. √ Brodnik et al. [4] gave a structure that takes O( n) extra locations, where n is the current size of the array, and supports the operations in O(1) time. One advantage of this structure is that√elements are never re-allocated. They have also shown that any such structure requires Ω( n) extra locations even if there are no constraints on the access time.

37.9.2

Dynamic Arrays

A resizable array supports adding/deleting elements only at the end of the list, but does not support insertion/deletion of elements at arbitrary positions in the array. A dynamic array is data structure that maintains a sequence of records under the following operations: • access(i): return the i-th record in the sequence, • insert(r, i): insert the record r at position i in the sequence, and • delete(i): delete the i-th record in the sequence. A standard way of implementing a dynamic array is to store the records in an array and maintain it using the doubling technique. This supports access in O(1) but requires O(n) time to support insert and delete operations. √ Goodrich and Kloss [24] gave a structure, the tiered vector , that takes n + O( n) words of space to represent a sequence of length n, where √ each record ﬁts in a word. This structure supports access in O(1) time and updates in O( n) amortized time. The major component of a tiered vector is a set of indexable circular deques. A deque is a linear list which provides constant time insert and delete operations at either the head or the tail of the list [35]. A circular deque is a list which is stored in a sequential section of memory of ﬁxed size. An indexable circular deque maintains pointers h and t, which reference the index in memory of the head and tail of this list. A tiered vector is a set of indexable circular deques. Insertions and deletions in an arbitrary indexable circular deque require time linear in its size, but inserting/deleting at either the head or the tail of the list takes O(1) time. √ Thus, by maintaining√the given sequence of n elements using O( n) indexable circular √ deques each of size O( n), one can support access in O(1) time and updates in O( n) amortized time. One can easily generalize this structure to one that supports access in O(1/) time and updates in O(n ) time, for any parameter 0 < ≤ 1. Using this structure to represent a block of O(lgO(1) n) records, Raman et al. [49] gave a structure that supports access and updates in O(lg n/ lg lg n) amortized time, using o(n) bits of extra space. The main idea is to divide the given list of length n into sublists of length between 12 lg4 n and 2 lg4 n, and store the sublists using the above dynamic array structure. One can √ maintain these sublists as the leaves of a weight-balanced B-tree with branching factor O( lg n), and hence height O(lg n/ lg lg n). By restricting the length of the array, Raman and Rao [51] obtained a dynamic array structure that maintains a sequence of l = O(wO(1) ) records of r = O(w) bits each, where w is the word size. This structure supports access in O(1) time and updates in O(1 + lr/kw) amortized time, and uses lr + O(k lg l) bits, for any parameter k ≤ l. The data structure also requires a precomputed table of size O(2w ) bits, for any ﬁxed > 0. The main idea is to store the newly added elements separately from the existing elements, and store a structure to indicate all the positions of the ‘updated’ elements. The structure is rebuilt after every k updates.

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37.10

37-19

Conclusions

We looked at several succinct data structures that achieve almost optimal space while supporting the required operations eﬃciently. Apart from being of theoretical interest, succinct data structures will also have many practical applications due to the enormous growth in the amount of data that needs to be stored in a structured fashion. Most of the succinct data structures we presented here can be constructed in linear time from the standard representation. But this method requires more space than necessary during the construction. Developing algorithms that directly construct the succinct representations without using more space during construction, preferably in optimal time, is an important open problem. See [31] for an example. Another aspect, that is more of theoretical signiﬁcance, is to study the cell probe (in particular, bit probe) complexity of succinct data structures [6, 22, 48]. For most problems, no bounds other than the straightforward translations from the bounds on the RAM model are known. It is also interesting to consider the time-space trade-oﬀs of these structures.

References [1] Mikl´os Ajtai. A Lower Bound for Finding Predecessors in Yao’s Cell Probe Model. Combinatorica, 8(3): 235-247, 1988. [2] David Benoit, Erik D. Demaine, J. Ian Munro, and Venkatesh Raman. Representing Trees of Higher Degree. Proceedings of the Workshop on Algorithms and Data Structures, LNCS 1663: 169–180, 1999. [3] John Boyer. Algorithm Alley: Resizable Data Structures. Dr. Dobb’s Journal, 23(1), January 1998. [4] Andrej Brodnik, Svante Carlsson, Erik D. Demaine, J. Ian Munro, and Robert Sedgewick. Resizable Arrays in Optimal Time and Space. Proceedings of the Workshop on Algorithms and Data Structures, LNCS 1663: 37–48, 1999. [5] Andrej Brodnik and J. Ian Munro. Membership in Constant Time and Almost Minimum Space. SIAM Journal on Computing, 28(5): 1627–1640, 1999. [6] Harry Buhrman, Peter Bro Miltersen, Jaikumar Radhakrishnan, and Srinivasan Venkatesh. Are Bitvectors Optimal? Proceedings of the ACM Symposium on Theory of Computing, 449–458, 2000. [7] Y.-T. Chiang, C.-C. Lin, and Hsueh-I Lu. Orderly Spanning Trees with Applications to Graph Drawing and Graph Encoding. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 506–515, 2001. [8] Richie C. Chuang, Ashim Garg, Xin He, Ming-Yang Kao, and Hsueh-I Lu. Compact Encodings of Planar Graphs via Canonical Orderings and Multiple Parentheses.

[9] [10] [11] [12] [13] [14]

Proceedings of the International Colloquium on Automata, Languages and Programming, LNCS 1443: 118–129, 1998. David R. Clark. Compact Pat Trees. Ph.D. Thesis, University of Waterloo, 1996. David R. Clark and J. Ian Munro. Eﬃcient Suﬃx Trees on Secondary Storage. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 383–391, 1996. John J. Darragh, John G. Cleary, and Ian H. Witten. Bonsai: a Compact Representation of Trees. Software Practice and Experience, 23(3): 277–291, 1993. Erik D. Demaine. Algorithm Alley: Fast and Small Resizable Arrays. Dr. Dobb’s Journal, 326: 132-134, July 2001. Paul F. Dietz. Optimal Algorithms for List Indexing and List Ranking. Proceedings of the Workshop on Algorithms and Data Structures, LNCS 382: 39–46, 1989. Martin Dietzfelbinger, Anna R. Karlin, Kurt Mehlhorn, Friedhelm Meyer auf der

© 2005 by Chapman & Hall/CRC

37-20

[15] [16]

[17]

[18]

[19] [20]

[21]

[22]

[23]

[24]

[25] [26]

[27]

[28]

[29]

[30]

[31]

Handbook of Data Structures and Applications

Heide, Hans Rohnert, and Robert E. Tarjan. Dynamic Perfect Hashing: Upper and Lower Bounds. SIAM Journal on Computing, 23(4):738–761, 1994. Peter Elias. Eﬃcient Storage and Retrieval by Content and Address of Static Files. Journal of the ACM, 21(2): 246-260 (1974) Paolo Ferragina and Giovanni Manzini. Opportunistic Data Structures with Applications. Proceedings of the Annual Symposium on Foundations of Computer Science, 390–398, 2000. Paolo Ferragina and Giovanni Manzini. An Experimental Study of an Opportunistic Index. Proceedings of the Annual Symposium on Foundations of Computer Science, 269-278, 2001. Dimitris Fotakis, Rasmus Pagh, Peter Sanders, and Paul G. Spirakis. Space Eﬃcient Hash Tables with Worst Case Constant Access Time. Proceedings of Symposium on Theoretical Aspects of Computer Science, LNCS 2607: 271–282, 2003. Michael L. Fredman, J´ anos Koml´os, and Endre Szemer´edi. Storing a Sparse Table with O(1) Worst Case Access Time. Journal of the ACM, 31(3): 538–544, 1984. Michael L. Fredman and Michael E. Saks. The Cell Probe Complexity of Dynamic Data Structures. Proceedings of the ACM Symposium on Theory of Computing, 345–354, 1989. Michael L. Fredman and Dan E. Willard. Trans-Dichotomous Algorithms for Minimum Spanning Trees and Shortest Paths. Journal of Computer and System Sciences, 48(3): 533–551, 1994. Anna G´ al and Peter Bro Miltersen. The Cell Probe Complexity of Succinct Data Structures. Proceedings of the International Colloquium on Automata, Languages and Programming, LNCS 2719: 332–344, 2003. Richard F. Geary, Rajeev Raman, and Venkatesh Raman. Succinct Ordinal Trees with Level-ancestor Queries. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 1–10, 2004. Michael T. Goodrich and John G. Kloss II. Tiered Vectors: Eﬃcient Dynamic Array for JDSL. Proceedings of the Workshop on Algorithms and Data Structures, LNCS 1663: 205–216, 1999. Ronald L. Graham, Donald E. Knuth, and Oren Patashnik. Concrete Mathematics, Addison-Wesley, 1989. Roberto Grossi and Jeﬀrey S. Vitter. Compressed Suﬃx Arrays and Suﬃx Trees with Applications to Text Indexing and String Matching. Proceedings of the ACM Symposium on Theory of Computing, 397–406, 2000. Roberto Grossi, Ankur Gupta, and Jeﬀrey S. Vitter. High-order Entropy-compressed Text Indexes. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 841–850, 2003. Roberto Grossi, Ankur Gupta, and Jeﬀrey S. Vitter. When Indexing Equals Compression: Experiments with Compressing Suﬃx Arrays and Applications. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 629–638, 2004. Xin He, Ming-Yang Kao, and Hsueh-I Lu. Linear-time Succinct Encodings of Planar Graphs via Canonical Orderings. SIAM Journal on Discrete Mathematics, 12: 317– 325, 1999. Wing-Kai Hon, Kunihiko Sadakane, Wing-Kin Sung. Succinct Data Structures for Searchable Partial Sums. Proceedings of the International Symposium on Algorithms and Computation, LNCS 2906, 505–516, 2003. Wing-Kai Hon, Kunihiko Sadakane, and Wing-Kin Sung. Breaking a Time-and-Space Barrier in Constructing Full-Text Indices. Proceedings of the Annual Symposium on Foundations of Computer Science, 251–260, 2003.

© 2005 by Chapman & Hall/CRC

Succinct Representation of Data Structures

37-21

[32] Guy Jacobson. Space-eﬃcient Static Trees and Graphs. Proceedings of the Annual Symposium on Foundations of Computer Science, 549–554, 1989. [33] Guy Jacobson. Succinct Static Data Structures. Ph.D. thesis, Carnegie Mellon University, 1988. [34] Sampath Kannan, Moni Naor, Steven Rudich. Implicit Representation of Graphs. Proceedings of the ACM Symposium on Theory of Computing, 334–343, 1988. [35] Donald E. Knuth. The Art of Computer Programming, Vol. 1: Fundamental Algorithms. Addison-Wesley, Third edition, 1997. [36] Frank T. Leighton. Introduction to Parallel Algorithms and Architectures: Arrays, Trees and Hypercubes. Computer Science and Information Processing, Morgan Kauﬀman, 1992. [37] Hsueh-I Lu. Linear-time Compression of Bounded-genus Graphs into Informationtheoretically Optimal Number of Bits. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 223–224, 2002. [38] Hsueh-I Lu. Linear-Time Information-theoretically Optimal Encodings Supporting Constant-time Queries for Constant-genus Graphs. Manuscript, 2002. [39] Edward M. McCreight. A Space-economical Suﬃx Tree Construction Algorithm. Journal of the ACM, 23(2): 262–272, 1976. [40] J. Ian Munro. Tables. Proceedings of the Conference on Foundations of Software Technology and Theoretical Computer Science, LNCS 1180: 37–42, 1996. [41] J. Ian Munro and Venkatesh Raman. Succinct Representation of Balanced Parentheses and Static Trees. SIAM Journal on Computing, 31(3): 762–776, 2001. [42] J. Ian Munro and S. Srinivasa Rao. Succinct Representations of Functions. Proceedings of the International Colloquium on Automata, Languages and programming, LNCS 3142, 1006–1015, 2004. [43] J. Ian Munro, Venkatesh Raman, Rajeev Raman, and S. Srinivasa Rao. Succinct Representations of Permutations. Proceedings of the International Colloquium on Automata, Languages and Programming, LNCS 2719: 345–356, 2003. [44] J. Ian Munro, Venkatesh Raman, and S. Srinivasa Rao. Space Eﬃcient Suﬃx trees. Journal of Algorithms 39(2): 205–222, 2001. [45] J. Ian Munro, Venkatesh Raman, and Adam Storm. Representing Dynamic Binary Trees Succinctly. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 529–536, 2001. [46] Rasmus Pagh. Low Redundancy in Static Dictionaries with Constant Query Time. SIAM Journal on Computing 31(2): 353–363, 2001. [47] Rasmus Pagh and Flemming F. Rodler. Cuckoo Hashing. Proceedings of the European Symposium on Algorithms, LNCS 2161: 121–133, 2001. [48] Jaikumar Radhakrishnan, Venkatesh Raman, and S. Srinivasa Rao. Explicit Deterministic Constructions for Membership in the Bitprobe Model. Proceedings of the European Symposium on Algorithms, LNCS 2161: 290–299, 2001. [49] Rajeev Raman, Venkatesh Raman, and S. Srinivasa Rao. Succinct Dynamic Data Structures. Proceedings of the Workshop on Algorithms and Data Structures, LNCS 2125, 426–437, 2001. [50] Rajeev Raman, Venkatesh Raman, and S. Srinivasa Rao. Succinct Indexable Dictionaries with Applications to Encoding k -ary Trees and Multisets. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 233–242, 2002. [51] Rajeev Raman and S. Srinivasa Rao. Dynamic Dictionaries and Binary Trees in Nearminimum space. Proceedings of the International Colloquium on Automata, Languages and Programming, LNCS 2719: 357–368, 2003. [52] Venkatesh Raman and S. Srinivasa Rao. Static Dictionaries Supporting Rank. Pro-

© 2005 by Chapman & Hall/CRC

37-22

[53] [54]

[55] [56] [57] [58] [59]

Handbook of Data Structures and Applications

ceedings of the International Symposium on Algorithms and Computation, LNCS 1741: 18–26, 1999 S. Srinivasa Rao. Time Space Tradeoﬀs for Compressed Suﬃx Arrays. Information Processing Letters, 82(6): 307–311, 2002. Kunihiko Sadakane. Succinct Representations of lcp Information and Improvements in the Compressed Suﬃx Arrays. Proceedings of the ACM-SIAM Symposium on Discrete Algorithms, 225-232, 2002. Jeanette P. Schmidt and Alan Siegel. The Spatial Complexity of Oblivious k-probe Hash Functions. SIAM Journal on Computing, 19(5): 775-786, 1990. Edward Sitarski. Algorithm Alley: HATs: Hashed Array Tables. Dr. Dobb’s Journal, 21(11), September 1996. Gyorgy Tur´ an. Succinct Representations of Graphs. Discrete Applied Mathematics, 8: 289–294, 1984. Peter Weiner. Linear Pattern Matching Algorithm. Proceedings of the IEEE Symposium on Switching and Automata Theory, 1–11, 1973. J. W. J. Williams. Algorithm 232: Heap Sort. Communications of the ACM, 7(6): 347–348, 1964.

© 2005 by Chapman & Hall/CRC

38 Randomized Graph Data-Structures for Approximate Shortest Paths 38.1 38.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-1 A Randomized Data-Structure for Static APASP : Approximate Distance Oracles . . . . . . . . . . . . . . . . . . . 38-2 3-Approximate Distance Oracle • Preliminaries • (2k − 1)-Approximate Distance Oracle • Computing Approximate Distance Oracles

38.3

Main Idea • Notations • Hierarchical Distance Maintaining Data-Structure • Bounding the Size of Bd,S under Edge-Deletions • Improved Decremental u Algorithm for APASP up to Distance d

Surender Baswana Indian Institute of Technology, Delhi

Sandeep Sen Indian Institute of Technology, Delhi

38.1

A Randomized Data-Structure for Decremental APASP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-10

38.4

Further Reading and Bibliography . . . . . . . . . . . . . . . 38-17

Introduction

Let G = (V, E) be an undirected weighted graph on n = |V | vertices and m = |E| edges. Length of a path between two vertices is the sum of the weights of all the edges of the path. The shortest path between a pair of vertices is the path of least length among all possible paths between the two vertices in the graph. The length of the shortest path between two vertices is also called the distance between the two vertices. An α-approximate shortest path between two vertices is a path of length at-most α times the length of the shortest path. Computing all-pairs exact or approximate distances in G is one of the most fundamental graph algorithmic problem. In this chapter, we present two randomized graph datastructures for all-pairs approximate shortest paths (APASP) problem in static and dynamic environments. Both the data-structures are hierarchical data-structures and their construction involves random sampling of vertices or edges of the given graph. The ﬁrst data-structure is a randomized data-structure designed for eﬃciently computing APASP in a given static graph. In order to answer a distance query in constant time, most of the existing algorithms for APASP problem output a data-structure which is an n × n matrix that stores the exact/approximate distance between each pair of vertices explicitly. Recently a remarkable data-structure of o(n2 ) size has been designed for reporting allpairs approximate distances in undirected graph. This data-structure is called approximate distance oracle because of its ability to answer a distance query in constant time in spite of

38-1

© 2005 by Chapman & Hall/CRC

38-2

Handbook of Data Structures and Applications

its sub-quadratic size. We present the details of this novel data-structure and an eﬃcient algorithm to build it. The second data-structure is a dynamic data-structure designed for eﬃciently maintaining APASP in a graph that is undergoing deletion of edges. For a given graph G = (V, E) and a distance parameter d ≤ n, this data-structure provides the ﬁrst o(nd) update time algorithm for maintaining α-approximate shortest paths for all pairs of vertices separated by distance ≤ d in the graph.

38.2

A Randomized Data-Structure for Static APASP : Approximate Distance Oracles

There exist classical algorithms that require O(mn log n) time for solving all-pairs shortest paths (APSP) problem. There also exist algorithms based on fast matrix multiplication that achieve sub-cubic time. However, there is still no combinatorial algorithm that could achieve O(n3− ) running time for APSP problem. In recent past, many simple combinatorial algorithms have been designed that compute all-pairs approximate shortest paths (APASP) for undirected graphs. These algorithms achieve signiﬁcant improvement in the running time compared to those designed for APSP, but the distance reported has some additive or/and multiplicative error. An algorithm is said to compute all pairs α-approximate shortest paths, if for each pair of vertices u, v ∈ V , the distance reported is bounded by αδ(u, v), where δ(u, v) denotes the actual distance between u and v. Among all the data-structures and algorithms designed for computing all-pairs approximate shortest paths, the approximate distance oracles are unique in the sense that they achieves simultaneous improvement in running time (sub-cubic) as well as space (subquadratic), and still answers any approximate distance query in constant time. For any k ≥ 1, it takes O(kmn1/k ) time to compute (2k − 1)-approximate distance oracle of size O(kn1+1/k ) that would answer any (2k − 1)-approximate distance query in O(k) time.

38.2.1

3-Approximate Distance Oracle

For a given undirected graph, storing distance information from each vertex to all the vertices requires θ(n2 ) space. To achieve sub-quadratic space, the following simple idea comes to mind. From each vertex, if we store distance information to a small number of vertices, can I : we still be able to report distance between any pair of vertices ? The above idea can indeed be realized using a simple random sampling technique, but at the expense of reporting approximate, instead of exact, distance as an answer to a distance query. We describe the construction of 3-approximate distance oracle as follows. 1. Let R ⊂ V be a subset of vertices formed by picking each vertex randomly independently with probability γ (the value of γ will be ﬁxed later on). 2. For each vertex u ∈ V , store the distances to all the vertices of the sample set R. 3. For each vertex u ∈ V , let p(u) be the vertex nearest to u among all the sampled vertices, and let Su be the set of all the vertices of the graph G that lie closer to u than the vertex p(u). Store the vertices of set Su along with their distance from u. For each vertex u ∈ V , storing distance to vertices Su helps in answering distance query to vertices in locality of u, whereas storing distance from all the vertices of the graph to all

© 2005 by Chapman & Hall/CRC

Randomized Graph Data-Structures for Approximate Shortest Paths

Sampled vertices

p(u)

u

38-3

v

FIGURE 38.1: v is farther to u than p(u), bounding δ(p(u), v) using triangle inequality. the sampled vertices will be required (as shown below) to answer distance query for vertices that are not present in locality of each other. In order to extract distance information in constant time, for each vertex u ∈ V , we use two hash tables (see [4], chapter 12), for storing distances from u to vertices of sets Su and R respectively. The size of each hash-table is of the order of the size of corresponding set (Su or R). A typical hash table would require O(1) expected time to determine whether w ∈ Su , and if so, report the distance δ(u, w). In order to achieve O(1) worst case time, the 2 − level hash table (see Fredman, Komlos, Szemeredi, [8]) of optimal size is employed. The collection of these hash-tables (two tables per vertex) constitute a data-structure that we call approximate distance oracle. Let u, v ∈ V be any two vertices whose intermediate distance is to be determined approximately. If either u or v belong to set R, we can report exact distance between the two. Otherwise also exact distance δ(u, v) will be reported if v lies in Su or vice versa. The only case, that is left, is when neither v ∈ Su nor u ∈ Sv . In this case, we report δ(u, p(u)) + δ(v, p(u)) as approximate distance between u and v. This distance is bounded by 3δ(u, v) as shown below. δ(u, p(u)) + δ(v, p(u)) ≤ =

δ(u, p(u)) + (δ(v, u) + δ(u, p(u))) {using triangle inequality } 2δ(u, p(u)) + δ(u, v) {since graph is undirected }

≤

2δ(u, v) + δ(u, v) {since v lies farther to u than p(u), see Figure 38.1}

=

3δ(u, v)

Hence distance reported by the approximate distance oracle described above is no more than three times the actual distance between the two vertices. In other words, the oracle is a 3-approximate distance oracle. Now, we shall bound the expected size of the oracle. Using linearity of expectation, the expected size of the sample set R is nγ. Hence storing the distance from each vertex to all the vertices of sample set will take a total of O(n2 γ) space. The following lemma gives a bound on the expected size of the sets Su , u ∈ V . LEMMA 38.1 Given a graph G = (V, E), let R ⊂ V be a set formed by picking each vertex independently with probability γ. For a vertex u ∈ V , the expected number of

© 2005 by Chapman & Hall/CRC

38-4

Handbook of Data Structures and Applications

vertices in the set Su is bounded by 1/γ. Proof Let {v1 , v2 , · · · , vn−1 } be the sequence of vertices of set V \{u} arranged in nondecreasing order of their distance from u. The set Su consists of all those vertices of the set V \{u} that lie closer to u than any vertex of set R. Note that the vertex vi belongs to Su if none of the vertices of set {v1 , v2 , · · · , vi−1 } (i.e., the vertices preceding vi in the sequence above) is picked in the sample R. Since each vertex is picked independently with probability p, therefore the probability that vertex vi belongs to set Su is (1 − γ)i−1 . Using linearity of expectation, the expected number of vertices lying closer to u than any sampled vertex is n−1 1 (1 − γ)i−1 ≤ γ i=1

Hence the expected number of vertices in the set Su is no more than 1/γ. 2 So the √ total expected size of the 3-approximate distance oracle is O(n γ +n/γ). Choosing γ = 1/ n to minimize the size, we conclude that there is a 3-approximate distance oracle of expected size n3/2 .

38.2.2

Preliminaries

In the previous subsection, 3-approximate distance oracle was presented based on the idea I. The (2k − 1)-approximate distance oracle is a k-level hierarchical data-structure. An important construct of the data-structure is Ball(·) deﬁned as follows. DEFINITION 38.1 For a vertex u, and subsets X, Y ⊂ V , the set Ball(u, X, Y ) is the set consisting of all those vertices of the set X that lie closer to u than any vertex from set Y . (see Figure 38.2)

vertex of set X vertex of set Y

u

vertex of set V−X−Y

Ball(u,X,Y) FIGURE 38.2: The vertices pointed by solid-arrows constitute Ball(u, X, Y ). It follows from the deﬁnition given above that Ball(u, X, ∅) is the set X itself, whereas

© 2005 by Chapman & Hall/CRC

Randomized Graph Data-Structures for Approximate Shortest Paths

38-5

Ball(u, X, X) = ∅. It can also be seen that the 3-approximate distance oracle described in the previous subsection stores Ball(u, V, R) and Ball(u, R, ∅) for each vertex u ∈ V . If the set Y is formed by picking each vertex of set X independently with probability γ, it follows from Lemma 38.1 that the expected size of Ball(u, X, Y ) is bounded by 1/γ. LEMMA 38.2 Let G = (V, E) be a weighted graph, and X ⊂ V be a set of vertices. If Y ⊂ X is formed by selecting each vertex independently with probability γ, the expected number of vertices in Ball(u, X, Y ) for any vertex u ∈ V is at-most 1/γ.

38.2.3

(2k − 1)-Approximate Distance Oracle

In this subsection we shall give the construction of a (2k − 1)-approximate distance oracle which is also based on the idea I, and can be viewed as a generalization of 3-approximate distance oracle. The (2k − 1)-approximate distance oracle is obtained as follows. 1. Let R1k ⊃ R2k ⊃ · · · Rkk be a a hierarchy of subsets of vertices with R1k = V , and Rik , i > 1 is formed by selecting each vertex of set Ri−1 independently with probak bility n−1/k . 2. For each vertex u ∈ V , store the distance from u to all the vertices of Ball(u, Rkk , ∅) in a hash table. 3. For each u ∈ V and each i < k, store the vertices of Ball(u, Rki , Rki+1 ) along with their distance from u in a hash table. For sake of conciseness and without causing any ambiguity in notations, henceforth we shall use Balli (u) to denote Ball(u, Rki , Rki+1 ) or the corresponding hash-table storing Ball(u, Rki , Rki+1 ) for i < k. The collection of the hash-tables Balli (u) : u ∈ V, i ≤ k constitute the data-structure that will facilitate answering of any approximate distance query in constant time. To provide a better insight into the data-structure, Figure 38.3 depicts the set of vertices constituting {Balli (u)|i ≤ k}. 3

Ball 4(u)

Ball (u) vertex of set R

1 k

2

vertex of set Rk

3

u

u

vertex of set Rk

. . . 1

2

Ball (u)

(i)

Ball (u)

(ii)

FIGURE 38.3: (i) Close description of Balli (u), i < k, (ii) hierarchy of balls around u.

© 2005 by Chapman & Hall/CRC

38-6

Handbook of Data Structures and Applications

Reporting distance with stretch at-most (2k − 1)

Given any two vertices u, v ∈ V whose intermediate distance has to be determined approximately. We shall now present the procedure to ﬁnd approximate distance between the two vertices using the k-level data-structure described above. Let p1 (u) = u and let pi (u), i > 1 be the vertex from the set Rik nearest to u. Since p (u) ∈ Balli (u) for each u ∈ V , so distance from each u to pi (u) is known for each i ≤ k. i

The query answering process performs at-most k search steps. In the ﬁrst step, we search Ball1 (u) for the vertex p1 (v). If p1 (v) is not present in Ball1 (u), we move to the next level and in the second step we search Ball2 (v) for vertex p2 (u). We proceed in this way querying balls of u and v alternatively : In ith step, we search Balli (x) for pi (y), where (x = u, y = v) if i is odd, and (x = v, y = u) otherwise. The search ends at ith step if pi (y) belongs to Balli (x), and then we report δ(x, pi (y)) + δ(y, pi (y) as an approximate distance between u and v. Distance Report(u, v) Algorithm for reporting (2k − 1)-approximate distance between u, v ∈ V l ← 1, x ← u,y← v While pl (y) ∈ / Balll (x) do swap(x, y), l ←l+1 return δ(y, pl (y)) + δ(x, pl (y))

Note that pk (y) ∈ Rkk , and we store the distance from x to all the vertices of set Rkk in Ballk (x) (which is Ball(x, Rkk , ∅). Therefore, the “while loop” of the distance reporting algorithm will execute at-most k − 1 iterations, spending O(1) time querying a hash table in each iteration. In order to ensure that the above algorithm reports (2k−1)-approximate distance between u, v ∈ V , we ﬁrst show that the following assertion holds : Ai : At the end of ith iteration of the “while loop”, δ(y, pi+1 (y)) ≤ iδ(u, v). The assertion Ai can be proved using induction on i as follows. First note that the variables x and y take the values u and v alternatively during the “while-loop”. So δ(x, y) = δ(u, v) always. For the base case (i = 0), p1 (y) is same as y, and y is v. So δ(y, p1 (y)) = 0. Hence A0 is true. For the rest of the inductive proof, it suﬃces to show that if Aj is true, then after (j + 1)th iteration Aj+1 is also true. The proof is as follows. We consider the case of “even j”, the arguments for the case of ’odd j’ are similar. For even j, at the end of jth iteration, {x = u, y = v}, Thus Aj implies that at the end of jth iteration δ(v, pj+1 (v)) ≤ jδ(u, v). Consider the (j + 1)th iteration. For the execution of (j + 1)th iteration, the condition in the ’while-loop’ must have been true. Thus pj+1 (v) does j+2 j+2 not belong to Ball(u, Rj+1 (u) must be k , Rk ). Hence by Deﬁnition 38.1, the vertex p lying closer to u than the vertex pj+1 (v). So at the end of (j + 1)th iteration, δ(y, pj+2 (y))

© 2005 by Chapman & Hall/CRC

Randomized Graph Data-Structures for Approximate Shortest Paths

38-7

can be bounded as follows δ(y, pj+2 (y))

= δ(u, pj+2 (u)) ≤ δ(u, pj+1 (v)) ≤ δ(u, v) + δ(v, pj+1 (v)) {using triangle inequality} ≤ δ(u, v) + jδ(u, v) {using Aj } = (j + 1)δ(u, v)

Thus the assertion Aj+1 holds. THEOREM 38.1 The algorithm Distance Report(u, v) reports (2k − 1)-approximate distance between u and v Proof As an approximate distance between u and v, note that the algorithm DistanceReport(u, v) would output δ(y, pl (y)) + δ(x, pl (y)), which by triangle inequality is no more than 2δ(y, pl (y)) + δ(x, y). Since δ(x, y) = δ(u, v), and δ(y, pl (y)) ≤ (l − 1)δ(u, v) as follows from assertion Al . Therefore, the distance reported is no more than (2l − 1)δ(u, v). Since the “while loop” will execute at-most k − 1 iterations, so l = k, and therefore the distance reported by the oracle is at-most (2k − 1)δ(u, v). Size of the (2k − 1)-approximate distance oracle

The expected size of the set Rkk is O(n1/k ), and the expected size of each Balli (u) is n1/k using Lemma 38.2. So the expected size of the (2k − 1)-approximate distance oracle is O(n1/k · n + (k − 1) · n · n1/k ) = O(kn1+1/k ).

38.2.4

Computing Approximate Distance Oracles

In this subsection, a sub-cubic running time algorithm is presented for computing (2k − 1)approximate distance oracles. It follows from the description of the data-structure associated with approximate distance oracle that after forming the sampled sets of vertices Rik , that takes O(m) time, all that is required is the computation of Balli (u) along with the distance from u to the vertices belonging to these balls for each u and i ≤ k. Since Balli (u) is the set of all the vertices of set Rki that lie closer to u than the vertex i+1 p (u). So, in order to compute Balli (u), ﬁrst we compute pi (u) for all u ∈ V, i ≤ k. Computing pi (u), ∀u ∈ V

Recall from deﬁnition itself that pi (u) is the vertex of the set Rki that is nearest to u. Hence, computing pi (u) for each u ∈ V requires solving the following problem with X = Rki , Y = V \X. Given X, Y ⊂ V in a graph G = (V, E), with X ∩ Y = ∅, compute the nearest vertex of set X for each vertex y ∈ Y . The above problem can be solved by running a single source shortest path algorithm (Dijkstra’s algorithm) on a modiﬁed graph as follows. Modify the original graph G by adding a dummy vertex s to the set V , and joining it to each vertex of the set X by an edge of zero weight. Let G be the modiﬁed graph. Running Dijkstra’s algorithm from the vertex s as the source, it can be seen that the distance from s to a vertex y ∈ Y is

© 2005 by Chapman & Hall/CRC

38-8

Handbook of Data Structures and Applications

indeed the distance from y to the nearest vertex of set X. Moreover, if e(s, x), x ∈ X is the edge leading to the shortest path from s to y, then x is the vertex from the set X that lies nearest to y. The running time of the Dijkstra’s algorithm is O(m log n), we can thus state the following lemma. Given X, Y ⊂ V in a graph G = (V, E), with X ∩ Y = ∅, it takes O(m log n) to compute the nearest vertex of set X for each vertex y ∈ Y .

LEMMA 38.3

COROLLARY 38.1 Given a weighted undirected graph G = (V, E), and a hierarchy of subsets {Rik |i ≤ k}, we can compute pi (u) for all i ≤ k, u ∈ V in O(km log n) time Computing Balli (u) eﬃciently

In order to compute Balli (u) for each vertex u ∈ V eﬃciently, we ﬁrst compute clusters i {C(v, Ri+1 k )|v ∈ Rk } which are deﬁned as follows : For a graph G = (V, E), and a set X ⊂ V , the cluster C(v, X) consists of each vertex w ∈ V for whom v lies closer than any vertex of set X. That is, δ(w, v) < δ(w, x) for each x ∈ X. DEFINITION 38.2

i It follows from the deﬁnition given above that u ∈ C(v, Ri+1 k ) if and only if v ∈ Ball (u). i+1 i i So, given clusters {C(v, Rk )|v ∈ Rk }, we can compute {Ball (u) : u ∈ V } as follows.

For each v ∈ Rik do For each u ∈ C(v, Ri+1 k ) do Balli (u) ←− Balli (u) ∪ {v} Hence we can state the following Lemma. i Given the family of clusters {C(v, Ri+1 k )|v ∈ Rk }, the time required to compute {Balli (u)} is bounded by O( u∈V |Balli (u)|).

LEMMA 38.4

The following property of the cluster C(v, Ri+1 k ) will be used in its eﬃcient computation. If u ∈ C(v, Ri+1 k ), then all the vertices on the shortest path from v to u also belong to the set C(v, Ri+1 k ).

LEMMA 38.5

We give a proof by contradiction. Given that u ∈ C(v, Ri+1 k ), let w be any vertex on the shortest path from v to u. If w ∈ / C(v, Ri+1 ), the vertex v doesn’t lie closer to w k than the vertex pi+1 (w). See Figure 38.4. In other words δ(w, v) ≥ δ(w, pi+1 (w). Hence Proof

δ(u, v) = δ(u, w) + δ(w, v) ≥ δ(u, w) + δ(w, pi+1 (w)) ≥ δ(u, pi+1 (w)) Thus v does not lie closer to u than pi+1 (w) which is a vertex of set Ri+1 k . Hence by deﬁnition, u ∈ / C(v, Ri+1 ), thus a contradiction. k From Lemma 38.5, it follows that the graph induced by the vertices of the cluster i+1 C(v, Ri+1 k ) is connected (hence the name cluster). Moreover, the entire cluster C(v, Rk )

© 2005 by Chapman & Hall/CRC

Randomized Graph Data-Structures for Approximate Shortest Paths

38-9

δ (u,v) w

v

p

u

i+1

(w)

i+1 FIGURE 38.4: if w does not lie in C(v, Ri+1 (w) would lie closer to u than v. k ), then p

appears as a sub-tree of the shortest path tree rooted at v in the graph. As follows from i+1 the deﬁnition, for each vertex x ∈ C(v, Ri+1 (x)). Based on these two k ), δ(v, x) < δ(x, p observations, here follows an eﬃcient algorithm that computes the set C(v, Ri+1 k ). The algorithm performs a restricted Dijkstra’s algorithm from the vertex v, wherein we don’t proceed along any vertex that does not belong to the set C(v, Ri+1 k ). A restricted Dijkstra’s algorithm : Note that the Dijkstra’s algorithm starts with singleton tree {v} and performs n − 1 steps to grow the complete shortest path tree. Each vertex x ∈ V \{v} is assigned a label L(x), which is inﬁnity in the beginning, but eventually becomes the distance from v to x. Let Vi denotes the set of i nearest vertices from v. The algorithm maintains the following invariant at the end of lth step : I(l) : For all the vertices of the set Vl , the label L(x) = δ(v, x), and for every other vertex y ∈ V \Vl , the label L(y) is equal to the length of the shortest path from v to y that passes through vertices of Vl only. During the (j + 1)th step, we select the vertex, say w from set V − Vj with least value of L(·). Since all the edge weights are positive, it follows from the invariant I(j) that L(w) = δ(w, v). Thus we add w to set Vj to get the set Vj+1 . Now in order to satisfy the invariant I(j + 1), we relax each edge e(w, y) incident from w to a vertex y ∈ V − Vj+1 as follows : L(y) ← min{L(y), L(w) + weight(w, y)}. It is easy to observe that this ensures the validity of the invariant I(j + 1). In the restricted Dijkstra’s algorithm, we will put the following restriction on relaxation of an edge e(w, y) : we relax the edge e(w, y) only if L(w)+weight(w, y) is less than δ(y, pi (y)). This will ensure that a vertex y ∈ / C(v, Ri+1 k ) will never be visited during the algorithm. The fact that the vertices of the cluster C(v, Ri+1 k ) form a sub-tree of the shortest path tree rooted at v, ensures that the above restricted Dijkstra’s algorithm indeed ﬁnds all the vertices (along with their distance from v) that form the cluster C(v, Ri+1 k ). Since the running time of Dijkstra’s algorithm is dominated by the number of edges relaxed, and each edge relaxation takes log(n) time only, therefore, the restricted Dijkstra’s algorithm will run in time of the order of x∈C(v,Ri+1 ) degree(x) log n. Thus the total time for computing all k

i the clusters {C(v, Ri+1 k )|v ∈ Rk } is given by :

⎛ degree(x) log n

=

v∈Rik ,x∈C(v,Ri+1 ) k

⎝

=

⎞

degree(x)⎠ log n

x∈V,v∈Balli (x)

|Ball (x)| · degree(x) log n i

x∈V

By Lemma 38.2, the expected size of Balli (x) is bounded by n1/k , hence using linearity of

© 2005 by Chapman & Hall/CRC

38-10

Handbook of Data Structures and Applications

i expectation, the total expected cost of computing {C(v, Ri+1 k )|v ∈ Rk } is asymptotically bounded by n1/k · degree(x) log n = 2mn1/k log n x∈V

Using the above result and Lemma 38.4, we can thus conclude that for a given weighted 1/k ˜ graph G = (V, E) and an integer k, it takes a total of O(kmn log n) time for comi puting {Ball (u)|i < k, u ∈ V }. If we use Fibonacci heaps instead of binary heaps in implementation of the restricted Dijkstra’s algorithm, we can get rid of the logarithmic factor in the running time. Hence the total expected running time for building the datastructure is O(kmn1/k ). As mentioned before, the expected size of the data-structure will be O(kn1+1/k ). To get O(kn1+1/k ) bound on the worst case size of the data-structure, we repeat the preprocessing algorithm. The expected number of iterations will be just a constant. Hence, we can state the following theorem. THEOREM 38.2 Given a weighted undirected graph G = (V, E) and an integer k, a data-structure of size O(kn1+1/k ) can be built in O(kmn1/k ) expected time so that given any pair of vertices, (2k − 1)-approximate distance between them can be reported in O(k) time.

38.3

A Randomized Data-Structure for Decremental APASP

There are a number of applications that require eﬃcient solutions of the APASP problem for a dynamic graph. In these applications, an initial graph is given, followed by an on-line sequence of queries interspersed with updates that can be insertion or deletion of edges. We have to carry out the updates and answer the queries on-line in an eﬃcient manner. The goal of a dynamic graph algorithm is to update the solution eﬃciently after the dynamic changes, rather than having to re-compute it from scratch each time. The approximate distance oracles described in the previous section can be used for answering approximate distance query in a static graph. However, there does not seem to be any eﬃcient way to dynamize these oracles in order to answer distance queries in a graph under deletion of edges. In this section we shall describe a hierarchical data structure for eﬃciently maintaining APASP in an undirected unweighted graph under deletion of edges. In addition to maintaining approximate shortest paths for all-pairs of vertices, this scheme has been used for eﬃciently maintaining approximate shortest paths for pair of vertices separated by distance in an interval [a, b] for any 1 ≤ a < b ≤ n. However, to avoid giving too much detail in this chapter, we would outline an eﬃcient algorithm for the following problem only. APASP-d : Given an undirected unweighted graph G = (V, E) that is undergoing deletion of edges, and a distance parameter d ≤ n, maintain approximate shortest paths for all-pairs of vertices separated by distance at-most d.

38.3.1

Main Idea

For an undirected unweighted graph G = (V, E), a breadth-ﬁrst-search (BFS) tree rooted at a vertex u ∈ V stores distance information with respect to the vertex u. So in order to maintain shortest paths for all-pairs of vertices separated by distance ≤ d, it suﬃces to

© 2005 by Chapman & Hall/CRC

Randomized Graph Data-Structures for Approximate Shortest Paths

38-11

maintain a BFS tree of depth d rooted at each vertex under deletion of edges. This is the approach taken by the previously existing algorithms. The main idea underlying the hierarchical data-structure that would provide eﬃcient update time for maintaining APASP can be summarized as follows : Instead of maintaining exact distance information separately from each vertex, keep small BFS trees around each vertex for maintaining distance information within locality of each vertex, and some what larger BFS trees around fewer vertices for maintaining global distance information. We now provide the underlying intuition of the above idea and a brief outline of the new techniques used. Let Bud denote the BFS tree of depth d rooted at vertex u ∈ V . There exists a simple algorithm for maintaining a BFS tree Bud under deletion of edges that takes a total of µ(Bud ) · d time, where µ(t) is the number of edges in the graph induced by tree t. Thus the total update time for maintaining shortest path for all-pairs separated by distance at-most d is of the order of u∈V µ(Bud ) · d. Potentially µ(Bud ) can be as large as θ(m), and so the total update time over any sequence of edge deletions will be O(mnd). Dividing this total update cost uniformly over the entire sequence of edge deletions, we can see that it takes O(nd) amortized update time per edge deletion, and O(1) time for reporting exact distance between any pair of vertices separated by distance at-most d. In order to achieve o(nd) bound on the update time fordthe problem APASP-d, we closely look at the expression of total update time u∈V µ(Bu ) · d. There are n terms in this expression each of potential size θ(m). A decrease in either the total number of terms or the size of each term would give an improvement in the total update time. Thus the following simple ideas come to mind. • Is it possible to solve the problem APASP-d by keeping very few depth-d BFS trees ? • Is there some other alternative t for depth bounded BFS tree Bud that has o(m) bound on µ(t) ? While it appears diﬃcult for any of the above ideas to succeed individually, they can be combined in the following way: Build and maintain BFS trees of depth 2d on vertices of a set S ⊂ V of size o(n), called the set of special vertices, and for each remaining vertex u ∈ V \S, maintain a BFS tree (denoted by BuS ) rooted at u and containing all the vertices that lie closer to u than the nearest special vertex, say N (u, S). Along the above lines, we present a 2-level data-structure (and its generalization to klevels) for the problem APASP-d. It can be seen that unlike the tree Bud , the new BFS tree BuS might not contain all the vertices lying within distance d from u. In order to ensure that our scheme leads to a solution of problem APASP-d, we use the following observation similar to that of 3approximate distance oracle in the previous section. If v is a vertex lying within distance d from u but not present in BuS , an approximate distance from u to v can be extracted from the tree rooted at the nearest special vertex N (u, S). This is because (by triangle inequality) the distance from N (u, S) to v is at most twice the distance from u to v. For our hierarchical scheme to lead to improved update time, it is crucial that we establish sub-linear upper bounds on µ(BuS ). We show that if the set S is formed by picking each ˜ vertex independently with suitable probability, then µ(BuS ) = O(m/|S|) with probability arbitrarily close to 1.

© 2005 by Chapman & Hall/CRC

38-12

Handbook of Data Structures and Applications + +

+

+

p3(u) +

+

+

p2(u)

+ + +

v

+

p(u)+ u

+

p3(u)

+

+ +

+

+

+

+

+

+

+

S2

p2(u)

+

+

S3

+

+

+

+

+

+

+

p(u)

+

u

S1 S0

FIGURE 38.5: Hierarchical scheme for maintaining approximate distance.

38.3.2

Notations

For an undirected unweighted graph G = (V, E), S ⊂ V , and a distance parameter d ≤ n, • • • • • • • •

δ(u, v) : distance between u and v. N (v, S) : the vertex of the set S ⊂ V nearest to v. Bvd : The BFS tree of depth d rooted at v ∈ V . BvS : The BFS tree of depth (δ(u, N (u, S)) − 1) rooted at v. Bvd,S : The BFS tree of depth min{d, δ(v, N (v, S)) − 1} rooted at v. µ(t) : the number of edges in the sub-graph (of G) induced by the tree t. ν(t) : the number of vertices in tree t. For a sequence {S0 , S1 , · · · Sk−1 }, Si ⊂ V , and a vertex u ∈ S0 , we deﬁne p0 (u) = u. pi+1 (u) = the vertex from set Si+1 nearest to pi (u). • α : the smallest integer of the form 2i which is greater than α.

38.3.3

Hierarchical Distance Maintaining Data-Structure

Based on the idea of “keeping many small trees, and a few large trees”, we deﬁne a k-level hierarchical data-structure for eﬃciently maintaining approximate distance information as follows. (See Figure 38.5) Let S = {S0 , S1 , · · · , Sk−1 : Si ⊂ V, |Si+1 | < |Si |} be a sequence. For a given distance 2i d,S

parameter d ≤ n and i < k − 1, let Fi be the collection {Bu i+1 : u ∈ Si } of BFS trees, and Fk−1 be the collection of BFS trees of depth 2k−1 d rooted at each u ∈ Sk−1 . We shall denote the set {(S0 , F0 ), (S1 , F1 ), · · · , (Sk−1 , Fk−1 )} as the k-level hierarchy Hdk induced by the sequence S. Let v be a vertex within distance d from u. If v is present in Bud,S1 , we can report exact distance between them. Otherwise, (as will soon become clear) we can extract the approximate distance between u and v from the collection of the BFS trees rooted at the vertices u, p(u), · · · , pk−1 (u) (see Figure 38.5). The following Lemma is the basis for estimating the distance between two vertices using the hierarchy Hdk . LEMMA 38.6

Given a hierarchy Hdk , if j < k − 1 is such that v is not present in any of

© 2005 by Chapman & Hall/CRC

Randomized Graph Data-Structures for Approximate Shortest Paths

38-13

i+1

p (u)

i

p (u)

v

FIGURE 38.6: Bounding the approximate distance between pi+1 (u) and v. 2i d,S

the BFS trees {Bpi (u) i+1 |0 ≤ i ≤ j}, then for all i ≤ j δ(pi+1 (u), pi (u)) ≤ 2i δ(u, v) and δ(pi+1 (u), v) ≤ 2i+1 δ(u, v).

Proof We give a proof by induction on j. Base Case (j = 0) : Since v is not present in BuS1 , so the vertex p(u) must be lying equidistant or closer to u than v. Hence δ(p(u), u) ≤ δ(u, v). Using triangle inequality, it follows that δ(p(u), v) ≤ δ(p(u), u) + δ(u, v) = 2δ(u, v). Induction Hypothesis : δ(pi+1 (u), pi (u)) ≤ 2i δ(u, v), and δ(pi+1 (u), v) ≤ 2i+1 δ(u, v), for all i < l. S Induction Step (j = l) : if v ∈ / Bpll+1 , then the distance between pl+1 and pl (u) must (u) not be longer than δ(pl (u), v), which is less than 2l δ(u, v) (using induction hypothesis). Now using triangle inequality (see the Figure 38.6 ) we can bound δ(pl+1 (u), v) as follows.

δ(pl+1 (u), v) ≤

δ(pl+1 (u), pl (u)) + δ(pl (u), v)

≤ ≤

2l δ(u, v) + δ(pl (u), v) 2l δ(u, v) + 2l δ(u, v) { using I.H.}

=

2l+1 δ(u, v)

Since the depth of a BFS tree at (k − 1)th level of hierarchy Hdk is 2k−1 d, therefore the following corollary holds true. If δ(u, v) ≤ d, then there is some pi (u), i < k such that v is present in the BFS tree rooted at pi (u) in the hierarchy Hdk . COROLLARY 38.2

LEMMA 38.7

the BFS trees Proof

Given a hierarchy Hdk , if j < k − 1 is such that v is not present in any of ≤ i ≤ j}, then δ(pi+1 (u), u) ≤ (2i+1 − 1)δ(u, v), for all i ≤ j.

i d,Si |0 {Bp2i (u)

Using simple triangle inequality, it follows that δ(pi+1 (u), u) ≤

δ(pl+1 (u), pl (u))

l≤i

≤

l≤i

© 2005 by Chapman & Hall/CRC

2l δ(u, v) = (2i+1 − 1)δ(u, v)

38-14

Handbook of Data Structures and Applications

It follows from Lemma 38.6 and Lemma 38.7 that if l is the smallest integer such that v is present in the BFS tree rooted at pl (u) in the hierarchy Hdk , then we can report δ(pl (u), u) + δ(pl (u), v) as an approximate distance between u and v. Along these lines, we shall present an improved decremental algorithms for APASP-d.

38.3.4

Bounding the Size of Bd,S under Edge-Deletions u

We shall now present a scheme based on random sampling to ﬁnd a set S ⊂ V of vertices that will establish a sub-linear bound on the number of vertices (ν(BuS )) as well as the number of edges (µ(BuS )) induced by BuS under deletion of edges. Since Bud,S ⊂ BuS , so these upper bounds also hold for Bud,S . Build the set S of vertices by picking each vertex from V independently with probability nc c n . The expected size of S is O(n ). Consider an ordering of vertices V according to their S levels in the BFS tree Bu (see Figure 38.7). The set of vertices lying at higher levels than the nearest sampled vertex in this ordering is what constitutes the BFS tree BuS . Along similar lines as that of Lemma 38.1, it follows that the expected size of this set (and hence ν(BuS )) is nnc . Moreover, it can be shown that ν(BuS ) is no more than 4nnlnc n with probability > 1 − n14 . Now as the edges are being deleted, the levels of the vertices in the tree BuS may fall, and so the ordering of the vertices may change. There will be a total of m such orderings during the entire course of edge deletions. Since the vertices are picked randomly and independently, therefore, the upper bound of 4nnlnc n holds for ν(BuS ) with probability (1 − n14 ) for any of these orderings. So we can conclude that ν(BuS ), the number of vertices of tree BuS never exceeds ( 4nnlnc n ) during the entire course of edge deletions with probability > 1 − n12 . To bound the number of edges induced by BuS , consider the following scheme. Pick every c edge independently with probability nm . The set S consists of the end points of the sampled edges. The expected size of S is O(nc ). Consider an ordering of the edges according to their level in BuS (level of an edge is deﬁned as the minimum of the levels of its end points). Along the lines of arguments given above (for bounding the the number of vertices of BuS ), n it can be shown that µ(BuS ), the number of edges induced by BuS remains ≤ 4mnln with c 1 probability > 1 − n2 during the entire course of edge deletions. Note that in the sampling scheme to bound the number of vertices of tree BuS , a vertex c v is picked with probability nn . Whereas in the sampling scheme for bounding the number c of edges in the sub-graph induced by BuS , a vertex v is picked with probability degree(v)·n . m It can thus be seen that both the bounds can be achieved simultaneously by the following random sampling scheme : R(c) : Pick each vertex v ∈ V independently with probability

nc n

+

degree(v)·nc . m

It is easy to see that the expected size of the set formed by the sampling scheme R(c) will be O(nc ). Given an undirected unweighted graph G = (V, E), a constant c < 1, and a distance parameter d; a set S of size O(nc ) vertices can be found that will ensure the following bound on the number of vertices and number of edges in the sub-graph of G induced by Bud,S . n ln n m ln n d,S ν(Bud,S ) = O , µ(B ) = O u nc nc THEOREM 38.3

with probability Ω(1 −

© 2005 by Chapman & Hall/CRC

1 n2 )

during the entire sequence of edge deletions.

Randomized Graph Data-Structures for Approximate Shortest Paths

38-15

u

BuS

.. . 1 2

3

4

1 2 3 4 5

5

unsampled vertex sampled vertex

...

Vertices in increasing order of distance from u

FIGURE 38.7: Bounding the size of BFS tree BuS . Maintaining the BFS tree Bd,S under edge deletions u

Even and Shiloach [7] design an algorithm for maintaining a depth-d BFS tree in an undirected unweighted graph. LEMMA 38.8 [Even, Shiloach [7]] Given a graph under deletion of edges, a BFS tree Bud , u ∈ V can be maintained in O(d) amortized time per edge deletion.

For maintaining a Bud,S tree under edge deletions, we shall use the same algorithm of [7] with the modiﬁcation that whenever the depth of Bud,S has to be increased (due to recent edge deletion), we grow the tree to its new level min {d, δ(u, N (u, S)) − 1}. We analyze the total update time required for maintaining Bud,S as follows. There are two computational tasks : one extending the level of the tree, and another that of maintaining the levels of the vertices in the tree Bud,S under edge deletions. For the ﬁrst task, the time required is bounded by the edges of the new level introduced which is O(µ(Bud,S )). For the second task, we give a variant of the proof of Even and Shiloach [7] (for details, please refer [7]). The running time is dominated by the processing of the edges in this process. In-between two consecutive processing of an edge, level of one of the end-points of the edge falls down by at least one unit. The processing cost of an edge can thus be charged to the level from which it has fallen. Clearly the maximum number of edges passing a level i is bounded by µ(Bud,S ). The number of levels in the tree Bud,S is min{d, ν(Bud,S )}. Thus the total cost for maintaining the BFS tree Bud,S over the entire sequence of edge deletions is O(µ(Bud,S ) · min {d, ν(Bud,S )}). LEMMA 38.9 Given an undirected unweighted graph G = (V, E) under edge deletions, a distance parameter d, and a set S ⊂ V ; a BFS tree Bud,S can be maintained in

O

µ(Bud,S ) d,S · min {d, ν(Bu )} m

amortized update time per edge deletion. Some technical details

As the edges are being deleted, we need an eﬃcient mechanism to detect any increase in the depth of tree Bud,S . We outline one such mechanism as follows. For every vertex v ∈ / S, we keep a count C[v] of the vertices of the S that are neighbors of v. It is easy to maintain C[u], ∀u ∈ V under edge-deletions. We use the count C[v] in order

© 2005 by Chapman & Hall/CRC

38-16

Handbook of Data Structures and Applications

to detect any increase in the depth of a tree Bud,S as follows. Note that when depth of a tree Bud,S is less than d, there has to be at-least one vertex w at leaf-level in Bud,S with C[w] ≥ 1 (as an indicator that the vertex p(u) is at next level). Therefore, after an edge deletion if there is no vertex w at leaf level with C[w] ≥ 1, we grow the BFS tree Bud,S beyond its previous level until either depth becomes d or we reach some vertex w with C[w ] ≥ 1. Another technical issue is that when an edge e(x, y) is deleted, we must update only those trees which contain x and y. For this purpose, we maintain for each vertex, a set of roots of all the BFS trees containing it. We maintain this set using any dynamic search tree.

38.3.5

Improved Decremental Algorithm for APASP up to Distance d

Let {(S0 , F0 ), (S1 , F1 ), · · · , (Sk−1 , Fk−1 )} be a k-level hierarchy Hdk with S0 = V and nci = |Si |, where each ci , i < k is a fraction to be speciﬁed soon. Each set Si , i > 0 is formed by picking the vertices from set V using the random sampling scheme R mentioned in the previous subsection. To report distance from u to v, we start form the level 0. We ﬁrst inquire if v lies in Bud,S1 . 2d,S2 . It follows If v does not lie in the tree, we move to the ﬁrst level and inquire if v lies in Bp(u) from the Corollary 38.2 that if δ(u, v) ≤ d, then proceeding in this way, we eventually ﬁnd a vertex pl (u), l ≤ k − 1 in the hierarchy Hdk such that v is present in the BFS tree rooted at pl (u). (See Figure 38.5). We then report the sum of distances from pl (u) to both u and v. Algorithm for reporting approximate distance using Hdk Distance(u, v) { D ←− 0; l ←− 0 2l d,S

While (v ∈ / Bpl (u) l+1 ∧ l < k − 1) do { 2l d,S

If u ∈ Bpl (u) l+1 , then D ← δ(pl (u), u), D ← D + δ(pl (u), pl+1 (u)) l ← l + 1; } 2l d,S

If v ∈ / Bpl (u) l+1 , then “δ(u, v) is greater than d”, else return δ(pl (u), v) + D } The approximation factor ensured by the above algorithm can be bounded as follows. It follows from the Lemma 38.7 that the ﬁnal value of D in the algorithm given above is bounded by (2l − 1)δ(u, v), and it follows from Lemma 38.6 that δ(pl (u), v) is bounded by 2l δ(u, v). Since l ≤ k − 1, therefore the distance reported by the algorithm is bounded by (2k − 1)δ(u, v) if v is at distance ≤ d. LEMMA 38.10 Given an undirected unweighted graph G = (V, E), and a distance parameter d. If α is the desired approximation factor, then there exists a hierarchical scheme Hdk with k = log2 α, that can report α-approximate shortest distance between any two vertices separated by distance ≤ d, in time O(k).

Update time for maintaining the hierarchy Hkd : The update time per edge deletion

© 2005 by Chapman & Hall/CRC

Randomized Graph Data-Structures for Approximate Shortest Paths

38-17

for maintaining the hierarchy Hkd is the sum total of the update time for maintaining the set of BFS trees Fi , i ≤ k − 1. Each BFS tree from the set Fk−1 has depth 2k−1 d, and edges O(m). Therefore, using Lemma 38.8, each tree from set Fk−1 requires O(2k−1 d) amortized update time per edge deletion. So, the amortized update time Tk−1 per edge deletion for maintaining the set Fk−1 is Tk−1 = O(nck−1 2k−1 d) It follows from the Theorem 38.3 that a tree t from a set Fi , i < (k − 1), has µ(t) = m ln n/nci+1 , and depth = min{2i d, n ln n/nci+1 }. Therefore, using the Lemma 38.9, each tree t ∈ Fi , i < k − 1 requires O(min{2i d/nci+1 , n ln n/n2ci+1 }) amortized update time per edge deletion. So the amortized update time Ti per edge deletion for maintaining the set Fi is nc i n1+ci 2 i Ti = O min 2 d ci+1 ln n, 2ci+1 ln n , i
=

O(nck−1 2k−1 d) +

i=k−2 i=0

nc i n1+ci O min 2i d ci+1 ln n, 2ci+1 ln2 n n n

To minimize the sum on right hand side in the above equation, we balance all the terms constituting the sum, and get 2(k−1) √ k−1 k k −1 ˜ 2 T =O 2 · min nd, (nd) If α is the desired approximation factor, then it follows from Lemma 38.10 that the number ˜ · of levels k, in the hierarchy are log2 α. So the amortized update time required is O(α α √ log2 α 2(α−1) min { nd, (nd) }). Let G = (V, E) be an undirected unweighted graph undergoing edge deletions, d be a distance parameter, and α > 2 be the desired approximation factor. There exists a data-structure D˙ α (1, d) for maintaining α-approximate distances for all-pairs sepα α ˜ · min { log2 √ arated by distance ≤ d in O(α nd, (nd) 2(α−1) }) amortized update time per edge deletion, and O(log α) query time. THEOREM 38.4

Based on the data-structure of [7], the previous best algorithm for maintaining all-pairs exact shortest paths of length ≤ d requires O(nd) amortized update time. We have been able to achieve o(nd) update time at the expense of introducing approximation as shown in Table 38.1 on the following page.

38.4

Further Reading and Bibliography

Zwick [10] presents a very recent and comprehensive survey on the existing algorithms for allpairs approximate/exact shortest paths. Based on the fastest known matrix multiplication

© 2005 by Chapman & Hall/CRC

38-18

TABLE 38.1

Handbook of Data Structures and Applications

Data-structure

α (the approximation factor)

Amortized update time per edge deletion

D˙ 3 (1, d)

3

√ ˜ O(min( nd, (nd)2/3 ))

D˙ 7 (1, d)

7

√ 3 nd, (nd)4/7 )) ˜ O(min(

D˙ 15 (1, d)

15

√ 4 nd, (nd)8/15 )) ˜ O(min(

Maintaining α-approximate distances for all-pairs of vertices separated by distance ≤ d.

algorithms given by Coppersmith and Winograd [3], the best bound for computing all-pairs shortest paths is O(n2.575 ) [11]. Approximate distance oracles are designed by Thorup and Zwick [9]. Based on a 1963 girth conjecture of Erd˝ os [6], they also show that Ω(n1+1/k ) space is needed in the worst case for any oracle that achieves stretch strictly smaller than (2k + 1). The space requirement of their approximate distance oracle is, therefore, essentially optimal. Also note that the preprocessing time of (2k − 1)-approximate distance oracle is O(mn1/k ), which is sub-cubic. However, for further improvement in the computation time for approximate distance oracles, Thorup and Zwick pose the following question : Can (2k −1)-approximate distance oracle be ˜ 2 ) time? Recently Baswana and Sen [2] answer their question in aﬃrmative computed in O(n for unweighted graphs. However, the question for weighted graphs is still open. For maintaining fully dynamic all-pairs shortest paths in graphs, the best known algorithm is due to Demetrescu and Italiano [5]. They show that it takes O(n2 ) amortized time to maintain all-pairs exact shortest paths after each update in the graph. Baswana et al. [1] present a hierarchical data-structure based on random sampling that provides eﬃcient decremental algorithm for maintaining APASP in undirected unweighted graphs. In addition to achieving o(nd) update time for the problem APASP-d (as described in this chapter), they also employ the same hierarchical scheme for designing eﬃcient data-structures for maintaining approximate distance information for all-pairs of vertices separated by distance in an interval [a, b], 1 ≤ a < b ≤ n.

Acknowledgment The work of the ﬁrst author is supported, in part, by a fellowship from Infosys Technologies Limited, Bangalore.

References [1] Baswana, S., Hariharan R., and Sen, S., Maintaining all-pairs approximate shortest paths under deletion of edges, in Proc. of the 14th Annual ACM-SIAM Symposium on Discrete Algorithms (SODA), 2003, 394. ˜ 2) [2] Baswana, S. and Sen S., Approximate distance oracle for unweighted graphs in O(n time, to appear in Proc. of the 15th Annual ACM-SIAM Symposium on Discrete Algorithms (SODA), 2004. [3] Coppersmith, D. and Winograd, S., Matrix multiplication via arithmetic progressions, J. symbolic computation, 9, 251, 1990. [4] Cormen, T.H., Leiserson, C.E., and Rivest, R.L., Introduction to Algorithms, the MIT Press, 1990, chapter 12. [5] Demetrescu, C., and Italiano, G.F., A new approach to dynamic all pairs shortest

© 2005 by Chapman & Hall/CRC

Randomized Graph Data-Structures for Approximate Shortest Paths

[6]

[7] [8] [9] [10] [11]

38-19

paths, in Proc. of 35th ACM Symposium on Theory of Computing (STOC), 2003, 159. Erd˝ os, P., Extremal problems in graph theory, Theory of Graphs and its Applications (Proc. Sympos. Smolenice,1963), Publ. House Czechoslovak Acad. Sci., Prague. 1964, 29. Even, S. and Shiloach, Y., An on-line edge-deletion problem, J. ACM, 28, 1, 1981. Fredman, M.L., Koml´ os, J., and Szemer´edi, E., Storing a sparse table with O(1) worst case time, J. ACM, 31, 538, 1984. Thorup, M. and Zwick, U., Approximate distance oracles, in Proc. of 33rd ACM symposium on theory of computing (STOC), 2001, 183. Zwick, U., Exact and approximate distances in graphs - a survey, in Proc. of the 9th European Symposium on Algorithms (ESA), 2001, 33. Zwick, U., All-pairs shortest paths in weighted directed graphs - exact and almost exact algorithms, in Proc. of the 39th IEEE Symposium on Foundations of Computer Science (FOCS), 1998, 310.

© 2005 by Chapman & Hall/CRC

39 Searching and Priority Queues in o(log n) Time 39.1 39.2 39.3 39.4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-1 Model of Computation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-2 Achieving Sub-Logarithmic Time per Element by Simple Means . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-3 Range Reduction

39.5

Arne Andersson Uppsala University

39.1

Packing Keys

•

Combining

Deterministic Algorithms and Linear Space . . . . Fusion Trees

39.6 39.7

•

•

39-6

Exponential Search Trees

From Amortized Update Cost to Worst-Case . . 39-10 Sorting and Priority Queues . . . . . . . . . . . . . . . . . . . . . . 39-10 Range Reduction • Packed Sorting • Combining the Techniques • Further Techniques and Faster Randomized Algorithms

Introduction

In many cases of algorithm design, the comparison-based model of computation is not the obvious choice. In this chapter, we show how to design data structures with very good complexity on a realistic model of computation where keys are regarded as binary strings, each one contained in one or more machine words (registers). This model is sometimes referred to as the RAM model ∗ , and it may be argued that it reﬂects real computers more accurately than the comparison-based model. In the RAM-model the word length becomes a natural part of the model. A comparison does not necessarily take constant time, on the other hand we may use a larger variety of operations on data. This model allows for comparison-based algorithms to be used but also for algorithms like tries, bucket sort, radix sort etc, which are known to be eﬃcient in practice.

39.2

Model of Computation

We use a unit-cost RAM with word size w. In the standard case we assume that the n keys are w-bit keys that can be treated as binary strings or integers, but we may also consider

∗ The

term RAM is used for many models. There are also RAM models with inﬁnite word length.

39-1

© 2005 by Chapman & Hall/CRC

39-2

Handbook of Data Structures and Applications

key that occupy multiple words. It should be noted that the assumption that keys can be treated as binary strings or integers also holds for ﬂoating-point numbers (cf. IEEE 754 ﬂoating-point standard [18, p. 228]). In the RAM-model, we can use other operations than comparisons, for instance indirect addressing, shifting, bitwise logical operations, and multiplication. Without loss of generality, we assume that w = Ω(log n), since otherwise we could not even ﬁt the number n, or a pointer, into a machine word. (If we can not ﬁt the number n into a constant number of words, the traditional analysis for comparison-based algorithms would also fail.) Our complexity analysis has two parameters, the number of keys n and the word length w. In cases where the complexity is expressed only in terms of n, it is supposed to hold for any possible value of w, and vice versa. For the searching problem, we assume that an ordered set is maintained and that operations like range queries and neighbour queries are supported. We say that we study ordered dictionaries, as deﬁned below. A dictionary is ordered if neighbour queries and range queries are supported at the same cost as member queries (plus the reporting cost), and if the keys can be reported in sorted order in linear time.

DEFINITION 39.1

39.3

Overview

The basic purpose of this chapter is to introduce some of the basic techniques and give references to recent development: • We start by presenting some simple data structures, which allow us to explain how the “information-theoretic O(log n) barrier” bay be surpassed. These data structures use a two-step approach: First, range reduction is used to decrease key length, such that we only need to consider keys that are much shorter than w. Secondly, we treat these short keys eﬃciently by packed computing where many keys are packed together in words. • Next, we discuss some more elaborate data structures. In particular, we show how to achieve low worst-case complexity in linear space. – The fusion tree, the ﬁrst data structure presented that achieved sublogarithmic complexity. – The exponential search tree, which achieves tight worst-case bound on dynamic ordered dictionaries. • We also give references to recent results on eﬃcient priority queue implementations and sorting.

© 2005 by Chapman & Hall/CRC

Searching and Priority Queues in o(log n) Time

39.4

39-3

Achieving Sub-Logarithmic Time per Element by Simple Means

In this section, we show that it is surprisingly simple to achieve a sublogarithmic complexity in n independent of w, which implies sorting and searching asymptotically faster than comparison-based algorithms. We use indirect addressing and large arrays. As a consequence, the data structures will need much space. However, all algorithms presented here can be ﬁt into linear space with randomization (i.e. with universal hashing [11]). In some cases, we will consider keys that are shorter than w, we will then use b or k to denote key length. In this section, we will use F (n, b) to express the complexity of searching, as speciﬁed below. DEFINITION 39.2 Let F (n, b) be the worst-case cost of performing one search or update in an ordered dictionary storing n keys of length b.

Unless we use hashing to obtain linear space, the methods discussed in this section can all be implemented with a simple instruction set. All necessary instructions are standard, they are even in AC0 . (An instruction is in AC 0 if it is implementable by a constant depth, unbounded fan-in (AND,OR,NOT)-circuit of size wO(1) . An example of a non-AC0 instruction is multiplication [9].)

39.4.1

Range Reduction

One way to simplify a computational problem is by range reduction. In this case, we reduce the problem of dealing with w-bit keys to that of dealing with k-bits keys, k < w. Assume that we view our w-bit keys as consisting of two w/2-bit characters and store these in a trie of height 2. Each internal node in the trie contains • a reference to the min-element below the node; the min-element is not stored in any subtrie; • a table of subtries, where each existing subtrie is represented by a w/2-bit key; • a data structure for eﬃcient neighbour search among the w/2-bit keys representing the subtries. Since each node except the root has one incoming edge and each node contains exactly one element (the min-element), the trie has exactly n nodes and n − 1 edges. We make neighbour searches in the following way: Traverse down the trie. If we ﬁnd a leaf, the search ends, otherwise we end up at an empty entry in the subtrie table of some node. By making a neighbour search in that node, we are done. The cost for traversing the trie is O(1) and the cost for a local neighbour search is O(F (n, b/2)) by deﬁnition. The space requirements depend on how the table of subtrie pointers is implemented. If the table is implemented as an array of length 2b/2 , each node in the trie requires Θ(2b/2 ) space. If we instead represent each table as a hash table, the total space of all hash tables is proportional to the total number of edges in the trie, which is n − 1. We summarize this in the following equation. F (n, w) = O(1) + F (n, w/2).

© 2005 by Chapman & Hall/CRC

(39.1)

39-4

Handbook of Data Structures and Applications

We can use the same construction recursively. That is, the local data structure for neighbour search among w/2-bit keys can be a trie of height 2 where w/4 bits are used for branching, etc. In order to apply recursion properly, we have to be a bit careful with the space consumption. First, note that if the number of edges in a trie with n elements was larger than n, for instance 2n, the total space (number of edges) would grow exponentially with the number of recursive levels. Therefore, we need to ensure that the number of edges in a trie is not just O(n) but actually at most n. This is the reason why each node contains a min-element; in this way we guarantee that the number of edges is n − 1. Secondly, even when we can guarantee that the space per recursive level does not increase, we are still faced with Θ(n) space (with hashing) per level. If we use more than a constant number of levels, this will require superlinear space. This is handled in the following way: When we apply the recursive construction r times, we only keep a small part of the elements in the recursive structure. Instead, the elements are kept in sorted lists of size Θ(r), and we keep only the smallest element from each list in our recursive trie. When searching for a key, we ﬁrst search for its list in the recursive trie structure, we then scan the list. Insertions and deletions are made in the lists, and the sizes of the lists are maintained by merging and splitting lists. Now, the total space taken by each level of the recursive trie construction is Θ(n/r) and the total space for r recursive levels is Θ(n). Searching, splitting and merging within the lists only takes O(r) time. In summary, setting r = log(w/k) we get the following lemma. LEMMA 39.1

F (n, w) = O(log(w/k)) + F (n, k)

This recursive reduction was ﬁrst used in van Emde Boas trees [20, 25–27].

39.4.2

Packing Keys

If the word length is small enough—as in today’s computers—the range reduction technique discussed above will decrease the key length to a constant at a low cost. However, in order to make a really convincing comparison between comparison-based algorithms and algorithms based on indirect addressing, we must make the complexity independent of the word size. This can be done by combining range reduction with packed computation. The basic idea behind packed computation is to exploit the bit-parallelism in a computer; many short keys can be packed in a word and treated simultaneously. The central observation is due to Paul and Simon [21]; they observed that one subtraction can be used to perform comparisons in parallel. Assume that the keys are of length k. We may then pack Θ(w/k) keys in a word in the following way: Each key is represented by a (k + 1)-bit ﬁeld. The ﬁrst (leftmost) bit is a test bit and the following bits contain the key, cf. Figure 39.1. Let X and Y be two words containing the same number of packed keys, all test bits in X are 0 and all test bits in Y are 1. Let M be a ﬁxed mask in which all test bits are 1 and all other bits are 0. Let R ← (Y − X) and M.

(39.2)

Then, the ith test bit in R will be 1 if and only if yi > xi . All other test bits, as well as all other bits, in R will be 0. We use packed comparisons to achieve the following result.

© 2005 by Chapman & Hall/CRC

Searching and Priority Queues in o(log n) Time

(Y − X)

39-5

Y

1

00010

1

00111

1

01001

1

01110

1

10101

1

11000

1

11011

1

11110

X

0

01011

0

01011

0

01011

0

01011

0

01011

0

01011

0

01011

0

01011

Y −X

0

10111

0

11100

0

11110

1

00011

1

01010

1

01101

1

10000

0

10011

M

1

00000

1

00000

1

00000

1

00000

1

00000

1

00000

1

00000

1

00000

M

0

00000

0

00000

0

00000

1

00000

1

00000

1

00000

1

00000

1

00000

AND

FIGURE 39.1: A multiple comparison in a packed B-tree. LEMMA 39.2

F (n, k) = O log(w/k) +

log n log(w/k)

.

(Sketch) We use a packed B-tree [2]. Th packed B-tree has nodes of degree Θ(w/k). In each node, the search keys are packed together in a single word, in sorted order from left to right. When searching for a k-bit key x in a packed B-tree, we take the following two steps: Proof

1. We construct a word X containing multiple copies of the query key x. X is created by a simple doubling technique: Starting with a word containing x in the rightmost part, we copy the word, shift the copy k + 1 steps and unite the words with a bitwise or. The resulting word is copied, shifted 2k + 2 steps and united, etc. Altogether X is generated in O(log(w/k)) time. 2. After the word X has been constructed, we traverse the tree. At each node, we compute the rank of x in constant time with a packed comparison. The cost of the traversal is proportional to the height of the tree, which is O(log n/ log(w/k)). A packed comparison at a node is done as in Expression 39.2. The keys in the B-tree node are stored in Y and X contains multiple copies of the query key. After subtraction and masking, the rightmost p test bits in R will be 1 if and only if there are p keys in Y which are greater than x. This is illustrated in Figure 39.1. Hence, by ﬁnding the position of the leftmost 1-bit in R we can compute the rank of x among the keys in Y . In order to ﬁnd the leftmost key, we can simply store all possible values of R in a lookup table. Since the number of possible values equals the number of keys in a B-tree node plus one, a hash table implementation of this lookup table would require only Θ(w/k) space. Above, we omitted a lot of details, such as how to perform updates and how pointers within a packed B-tree are represented. Details can be found in [2].

39.4.3

Combining

We can now derive our ﬁrst bounds for searching. First, we state bounds in terms of w. The following bound holds for searching [25–27]: THEOREM 39.1 Proof

F (n, w) = O(log w).

(Sketch) Apply Lemma 39.1 with k = 1.

Next, we show how to remove the dependency of word length [2]:

© 2005 by Chapman & Hall/CRC

39-6

Handbook of Data Structures and Applications

FIGURE 39.2: Searching in the internal trie in a fusion tree node. Horizontal lines represent signiﬁcant bit positions. The thin paths represent the 6 keys in the trie, while the fat path represents the search key x (which is not present in the trie). The arrow marks the position of the compressed key x among the keys in the trie.

THEOREM 39.2

√ F (n, w) = O( log n).

√ (Sketch) If log w = O( log n), Theorem 39.1 is suﬃcient. Otherwise, Lemma 39.1 √ √ √ with k =√w/2 log n gives F (n, w) = O( log n) + F (n, w/2 log n ). Lemma 39.2 gives that √ F (n, w/2 log n ) = O( log n). Proof

39.5

Deterministic Algorithms and Linear Space

The data structures in this section are more complicated than the previous ones. They also need more powerful—but standard—instructions, like multiplication. On the other hand, these structures achieves linear space without randomization (i.e. without hashing). DEFINITION 39.3 Let D(n) be the worst-case search cost and the amortized update cost in an ordered dictionary storing n keys in O(n) space.

39.5.1

Fusion Trees

The fusion tree was the ﬁrst data structure to surpass the logarithmic barrier for searching. The central part of the fusion tree [13] is a static data structure with the following properties: For d, d = O w1/6 , a static data structure containing d keys can any be constructed in O d4 time and space, such that it supports neighbour queries in O(1) worst-case time. LEMMA 39.3

© 2005 by Chapman & Hall/CRC

Searching and Priority Queues in o(log n) Time

39-7

(Sketch) The main idea behind the fusion tree is to view the keys as stored in an implicit binary trie and concentrate at the branching levels in this trie. We say that branching occurs at signiﬁcant bit positions. We illustrate this view with an example, shown in Figure 39.2. In the example, w = 16 and d = 6. We store a set Y of keys y1 , . . . , yd . Each key in Y is represented as a path in a binary trie. In the ﬁgure, a left edge denotes a 0 and a right edge denotes a 1. For example, y3 is 1010010101011010 . The signiﬁcant bit positions correspond to the branching levels in the trie. In this example the levels are 4, 9, 10, and 15, marked by horizontal lines. By extracting the signiﬁcant bit positions from each key, we create a set Y of compressed keys y1 , . . . , yd . In our example the compressed keys are 0000 , 0001 , 0011 , 0110 , 1001 , and 1011 . Since the trie has exactly d leaves, it contains exactly d − 1 binary nodes. Therefore, the number of signiﬁcant bit positions, and the length of a compressed key, is at most d − 1. This implies that we can pack the d keys, including test bits, in d2 bits. Since d = O w1/6 , the packed keys ﬁt in a constant number of words. This extraction of bits is nontrivial; it can be done with multiplication and masking. However, the extraction is not as perfect as described here; in order to avoid problems with carry bits etc, we need to extract some more bits than just the signiﬁcant ones. Here, we ignore these problems and assume that we can extract the desired bits properly. For details we refer to Fredman and Willard [13]. The d compressed keys may be used to determine the rank of a query key among the original d keys with packed computation. Assume that we search for x = 1010011001110100 , represented as the fat path in Figure 39.2. First, we extract the proper bits to form a compressed key x = 0010 . Then, we use packed searching to determine the rank of x among y1 , . . . , yd .. In this case, the packed searching will place x between y2 and y3 . as indicated by the arrow in Figure 39.2. This is not the proper rank of the original key x, but nevertheless it is useful. The important information is obtained by ﬁnding the position of the ﬁrst diﬀering bit of x and one of the keys y2 and y3 . In this example, the 7th bit is the ﬁrst diﬀering bit. and, since x has a 1 at this bit position, we can conclude that it is greater than all keys in Y with the same 6-bit preﬁx. Furthermore, the remaining bits in x are insigniﬁcant. Therefore, we can replace x by the key 1010011111111111 , where all the last bits are 1s. When compressed, this new key becomes 0111 . Making a second packed searching with this key instead, the proper rank will be found. Hence, in constant time we can determine the rank of a query key among our d keys. Proof

The original method by Fredman and Willard is slightly diﬀerent. Instead of ﬁlling the query keys with 1s (or 0s) and making a second packed searching, they use a large lookup table in each node. Fusion trees can be implemented without multiplication, using only AC0 instructions, provided that some simple non-standard instructions are allowed [5]. THEOREM 39.3

D(n) = O(log n/ log log n).

(Sketch) Based on Lemma 39.3, we use a B-tree where only the upper levels in the tree contain B-tree nodes, all having the same degree (within a constant factor). At the lower levels, traditional (i.e. comparison-based) weight-balanced trees are used. The reason for using weight-balanced trees is that the B-tree nodes are costly to reconstruct; the trees at the bottom ensure that few updates propagate to the upper levels. In this way, the amortized cost of updating a B-tree node is small.

Proof

© 2005 by Chapman & Hall/CRC

39-8

Handbook of Data Structures and Applications

The amortized cost of searches and updates is O(log n/ log d+log d) for any d = O w1/6 . The ﬁrst term corresponds to the number of B-tree levels and the second term corresponds to the height of the weight-balanced trees. Since w ≥ log n (otherwise a pointer would not ﬁt in a word), the cost becomes at most O(log n/ log log n).

39.5.2

Exponential Search Trees

The exponential search tree [3, 7] allows eﬃcient dynamization of static dictionary structures. The key feature is: Any static data structure for searching that can be constructed in polynomial time and space can be eﬃciently used in a dynamic data structure. The basic data structure is a multiway tree where the degrees of the nodes decrease doubly-exponentially down the tree. In each node, we use a static data structure for navigation. The way the tree is maintained, we can guarantee that, before an update occurs at a certain node, a polynomial number of updates will be made below it. Hence, even if an update requires a costly reconstruction of a static data structure, this will occur with large enough intervals. LEMMA 39.4 Suppose a static data structure containing d keys can be constructed in O d4 time and space, such that it supports neighbour queries in O(S(d)) worst-case time. Then, D(n) = O S n1/5 + D n4/5 ;

Proof

(Sketch) We use an exponential search tree. It has the following properties:

• Its root has degree Θ(n1/5 ). • The keys of the root are stored in a local (static) data structure, with the properties stated above. During a search, the local data structure is used to determine in which subtree the search is to be continued. • The subtrees are exponential search trees of size Θ(n4/5 ). First, we show that, given n sorted keys, an exponential search tree can be constructed in linear time and space. The cost of constructing a node of degree d is O d4 , and the total construction cost C(n) is (essentially) given by 4 1/5 + n1/5 · C n4/5 ⇒ C(n) = O(n). (39.3) C(n) = O n Furthermore, with a similar equation, the space required by the data structure can be shown to be O(n). Balance is maintained by joining and splitting subtrees. The basic idea is the following: A join or split occurs when the size of a subtree has changed signiﬁcantly, i.e. after Ω(n4/5 ) updates. Then, a constant number of subtrees will be reconstructed; according to Equation 39.3, the cost of this is linear in the size of the subtrees = O(n4/5 ). Also, some keys will be inserted or deleted from the root, causing a reconstruction of the root; the cost of this is by deﬁnition O(n4/5 ). Amortizing these two costs over the Ω(n4/5 ) updates, we get O(1) amortized cost for reconstructing the root. Hence, the restructuring cost is dominated by the search cost.

© 2005 by Chapman & Hall/CRC

Searching and Priority Queues in o(log n) Time

39-9

Finally, the search cost follows immediately from the description of the exponential search tree. Exponential search trees may be combined with various other data structures, as illustrated by the following two lemmas: A static data structure containing d keys can in O d4 be constructed log d time and space, such that it supports neighbour queries in O log w + 1 worst-case time.

LEMMA 39.5

Proof (Sketch) We just construct a static B-tree where each node hasthe largest possible degree according to Lemma 39.3. That is, it has a degree of min d, w1/6 . This tree satisﬁes the conditions of the lemma. LEMMA 39.6 A static data structure containing d keys and supporting neighbour queries in O(log w) worst-case time can be constructed in O d4 time and space.

(Sketch) We study two cases. Case 1: w > d1/3 . Lemma 39.5 gives constant query cost. Case 2: w ≤ d1/3 . The basic idea is to combine a van Emde Boas tree (Theorem 39.1) with perfect hashing. The data structure of Theorem 39.1 uses much space, which can be reduced to O(d) by hash coding. Since we can aﬀord a rather slow construction, we can use the deterministic algorithm by Fredman, Koml´ os, and Szemer´edi [12]. With this algorithm, we can construct a perfectly hashed van Emde Boas tree in O(d3 w) = o(d4 ) time. Proof

Combining these two lemmas, we get a signiﬁcantly improved upper bound on deterministic sorting and searching in linear space: THEOREM 39.4 Proof

√ D(n) = O( log n).

(Sketch) If we combine Lemmas 39.4, 39.5, and 39.6, we obtain the following

equation

log n D(n) = O min 1 + , log w

log w

+ D n4/5

(39.4)

which, when solved, gives the theorem. √ Taking both n and w as parameters, D(n) is o( log n) in many cases [3]. For example, it can be shown that D(n) = O(log w log log n). The strongest possible bound is achieved by using the following result by Beame and Fich [9] [Beame and Fich [9]] In polynomial time and space, we can construct a deterministic data structure over d keys supporting searches in O(min{ log d/ log log d, logloglogww }) time.

LEMMA 39.7

© 2005 by Chapman & Hall/CRC

39-10

Handbook of Data Structures and Applications

Combining this with the exponential search tree we get, among others, the following theorem. THEOREM 39.5

D(n) = O( log n/ log log n).

Since a matching lower bound was also given by Beame and Fich, this bound is optimal.

39.6

From Amortized Update Cost to Worst-Case

In fact, there are worst-case eﬃcient versions of the data structures above. Willard [28] gives a short sketch on how to make fusion trees worst-case eﬃcient, and as shown by Andersson and Thorup [7], the exponential search tree can be modiﬁed into a worst-case data structure. Here, we give a brief description of how exponential search trees are modiﬁed. In the above deﬁnition of exponential search trees, the criteria for when a subtree is too large or too small depend on the degree of its parent. Therefore, when a node is joined or split, the requirements on its children will change. Above, we handled that by simply rebuilding the entire subtree at each join or split, but in a worst-case setting, we need to let the children of a node remain unchanged at a join or split. In order to do this, we need to switch from a top-down deﬁnition to a bottom-up deﬁnition. DEFINITION 39.4 (Worst-case eﬃcient exponential search trees) In an exponential search tree all leaves are on the same depth. Let the height of a node to be the distance from the node to the leaves descending from it. For a non-root node v at height i > 0, the i weight (number of descending leaves) is |v| = Θ(ni ) where ni = α(1+1/(k−1)) and α = Θ(1). If the root has height h, its weight is O(nh ).

With the exception of the root, Deﬁnition 39.4 follows our previous deﬁnition of exponential search trees (when k = 5), that is, if v is a non-root node, it has Θ(|v|1/k ) children, each of weight Θ(|v|1−1/k ). The worst-case eﬃciency is mainly based on careful scheduling: the static search structures in the nodes are rebuilt in the background so that they remain suﬃciently updated as nodes get joined and split. This scheduling is developed in terms of a general theorem about rebuilding, which has some interesting properties as a tool for other de-amortization applications [7].

39.7

Sorting and Priority Queues

In the comparison-based model of computation, the cost per element is the same (O(log n)) for searching and sorting. However, in the RAM model of computation, the sorting problem can be solved faster than searching. The simple intuitive explanation of this is that the bitparallelism in packed computation can be utilized more eﬃciently when a number of keys are treated simultaneously, as in sorting, than when they are treated one-by-one as in searching. Even more, it turns out that priority queues can be as implemented as eﬃciently as sorting. (The intuitive reason for this is that a priority queue can use sorting as a subroutine, and only keep a small part of the queue perfectly sorted.) Thorup [24] has shown the following reduction:

© 2005 by Chapman & Hall/CRC

Searching and Priority Queues in o(log n) Time

39-11

THEOREM 39.6 If we can sort n keys in time S(n) per key, then we can implement a priority queue supporting ﬁnd-min in constant time and updates (insert and delete) in S(n) time.

In the following, we will use T (n, b) to denote the cost of sorting n b-bit keys.

39.7.1

Range Reduction

In sorting algorithms, range reduction is an often used technique. For example, we may view traditional radix sort, where we sort long strings by dividing them into shorter parts, as range reduction. For our purposes, we will use a range reduction technique by Kirkpatrick and Reisch [19], which is similar to the van Emde Boas tree, cf. Section 39.4.1. The only diﬀerence from Section 39.4.1 is that instead of letting each trie node contain a data structure for eﬃcient neighbour search among the outgoing edges, we just keep an unsorted list of all outgoing edges (plus the array for constant-time indexing of edges). Then, after all elements have been inserted into the trie, we create sorted lists of edges at all nodes by the following method: 1. 2. 3. 4.

Mark each edge with its parent node. Concatenate all edge lists and sort the entire list. Scan the sorted list and put each edge back in the proper node. All edges lists are now sorted. By a recursive traversal of the trie we can report all leafs in sorted order.

Other details, such as the need to store one key per node to avoid space blow up, are handled in the same way as in Section 39.4.1. Altogether, we get the reduction T (n, w) = O(n) + T (n, w/2).

(39.5)

T (n, w) = O(n log(w/k)) + T (n, k).

(39.6)

Applied recursively, this gives

39.7.2

Packed Sorting

For the sorting problem, multiple comparisons can be utilized more eﬃciently than in a packed B-tree. In the packed B-tree, we used the bit-parallelism to compare one key to many keys, in this way we implemented a parallel version of a linear search, which is not the most eﬃcient search method. For sorting, however, we can utilize the packed computation more eﬃciently. It turns out that algorithms for sorting networks are well suited for implementation by packed computation. A sorting network is a “static” algorithm; it contains a number of compareand-swap operations, these are the same regardless of the outcome of the comparisons. The merging technique by Batcher [8], originally used to design odd-even merge sort, can be eﬃciently implemented with packed computation. As a sorting network, Batcher’s merging algorithm has depth Θ(log n) where each level has O(n) compare-and-swap units. Based on the merging, we can sort in Θ(log2 n) time where the total work is Θ(n log2 n) Batcher’s merging technique is well suited for combination with the Paul-Simon technique, as shown by Albers and Hagerup [1].

© 2005 by Chapman & Hall/CRC

39-12

Handbook of Data Structures and Applications

LEMMA 39.8

T (n, w/ log n) ≤ O(n log log n).

Proof (Sketch) The key idea is that by packing Θ(log n) keys in a machine word, we can combine Batcher’s algorithm with packed computation to merge two sorted sequences in O(log log n) time. And, if we can merge two sequences of length Θ(log n) in O(log log n) time (instead of O(log n) by a comparison-based algorithm), we can use this as a subroutine tom implement a variant of merge sort that sorts n keys in O(n log log n) time (instead of O(n log n)).

39.7.3

Combining the Techniques

First, the bound on searching from Theorem 39.1 has a corresponding theorem for sorting [19]: THEOREM 39.7

T (n, w) = O(n log(w/ log n)).

(Sketch) Apply Eq. 39.6 with k = log n. Keys of length log n can be sorted in linear time with bucket sort.

Proof

Secondly, we combine range reduction with packed computation. We get the following bound [4]: THEOREM 39.8

T (n, w) = O(n log log n).

Proof (Sketch) If log w = O(log log n), Theorem 39.7 is suﬃcient. Otherwise, Eq. 39.6 with k = w/ log n gives T (n, w) = O(n log log n) + T (n, w/ log n). Lemma 39.8 gives the ﬁnal bound.

39.7.4

Further Techniques and Faster Randomized Algorithms

Apart from these rather simple techniques, there are a number of more elaborate techniques that allows the complexity to be improved further. Examples of such techniques are signature sort [4] and packed bucketing [17]. Here, we give a short sketch of signature sorting. Consider a situation where the word length w is very large, and we wish to reduce the problem of sorting w-bit keys to that of sorting k-bit keys, k log n. Instead of treating these k-bit keys directly, we represent each such key by a b-bit signature, where the b bits are a hash function of the k bits. In fact, for one w-bit key, we can in constant time replace it by a shorter key, consisting of q b-bit signatures (for details, we refer to the literature [4, 17]). 1. Replace each w-bit key by a qb-bit key of concatenated signatures. 2. Sort the qb-bit keys. 3. Compute, for each qb-bit key, its ﬁrst distinguishing signature. This can be done by constructing a signature-based trie of all keys. 4. If we know the ﬁrst distinguishing signature in a qb-bit key, we know the ﬁrst distinguishing k-bit ﬁeld in the corresponding w-bit key. Finding these k-bit

© 2005 by Chapman & Hall/CRC

Searching and Priority Queues in o(log n) Time

39-13

ﬁelds, the range reduction is completed and we can continue by sorting these shorter keys. It should be noted that the sorted set of qb-bit keys does not correspond to a sorted set of w-bit keys. However, the ordering we get is enough to ﬁnd the proper distinguishing ﬁelds. Furthermore, since we use hash coding, we might get collisions, in which case the method will not work. By choosing b large enough, the risk of failure is small enough that we can aﬀord to redo the entire sorting in case of failure: still the expected time for the range reduction step will be linear. As an important recent result, Han and Thorup presents a linear algorithm for splitting n integers into subsets, where each subset is of size O(log n). Combining this with techniques like√signature sorting, they manage to improve the randomized complexity of sorting √ to O(n log log n). This, in turn, implies that a priority queue can be implemented at O( log log n) time per update and ﬁnd-min in constant time. Other relevant reading can be found in the cited articles, or in [6, 10, 14–16, 22, 23]

References [1] S. Albers and T. Hagerup. Improved parallel integer sorting without concurrent writing. Inf. Contr., 136:25–51, 1997. Announced at SODA ’92. [2] A. Andersson. Sublogarithmic searching without multiplications. In Proc. 36th FOCS, pages 655–663, 1995. [3] A. Andersson. Faster deterministic sorting and searching in linear space. In Proc. 37th FOCS, pages 135–141, 1996. [4] A. Andersson, T. Hagerup, S. Nilsson, and R. Raman. Sorting in linear time? J. Comp. Syst. Sc., 57:74–93, 1998. Announced at STOC’95. [5] A. Andersson, P.B. Miltersen, and M. Thorup. Fusion trees can be implemented with AC0 instructions only. Theoretical Computer Science, 215(1-2):337–344, 1999. [6] A. Andersson and S. Nilsson. A new eﬃcient radix sort. In Proc. 35th Annual IEEE Symposium on Foundations of Computer Science, pages 714–721. IEEE Computer Society Press, 1994. [7] A. Andersson and M. Thorup. Tight(er) worst-case bounds on dynamic searching and priority queues. In Proc. 32th STOC, 2000. [8] K. E. Batcher. Sorting networks and their applications. In Proceedings of the AFIPS Spring Joint Computer Conference, pages 307–314, 1968. Volume 32. [9] P. Beame and F. Fich. Optimal bounds for the predecessor problem. In Proc. 31st STOC, pages 295–304, 1999. [10] A. Brodnik, P. B. Miltersen, and I. Munro. Trans-dichotomous algorithms without multiplication - some upper and lower bounds. In Proc. 5th WADS, LNCS 1272, pages 426–439, 1997. [11] J. L. Carter and M. N. Wegman. Universal classes of hash functions. Journal of Computer and System Sciences, 18:143–154, 1979. [12] M. L. Fredman, J. Koml´ os, and E. Szemer´edi. Storing a sparse table with O(1) worst case access time. Journal of the ACM, 31(3):538–544, 1984. [13] M. L. Fredman and D. E. Willard. Surpassing the information theoretic bound with fusion trees. J. Comput. Syst. Sci., 47:424–436, 1993. Announced at STOC’90. [14] M. L. Fredman and D. E. Willard. Trans-dichotomous algorithms for minimum spanning trees and shortest paths. J. Comput. Syst. Sci., 48:533–551, 1994. [15] Y. Han. Improved fast integer sorting in linear space. Inform. Comput., 170(8):81–94, 2001. Announced at STACS’00 and SODA’01.

© 2005 by Chapman & Hall/CRC

39-14

Handbook of Data Structures and Applications

[16] Y. Han. Fast integer sorting in linear space. In Proc. 34th STOC, pages 602–608, 2002. √ [17] Y. Han and M. Thorup. Integer sorting in o(n log log n) expected time and linear space. in Proc. FOCS ’02, 2002. [18] J. L. Hennessy and D. A. Patterson. Computer Organization and Design: The Hardware/Software Interface. Morgan Kaufmann Publ., San Mateo, CA, 1994. [19] D. Kirkpatrick and S. Reisch. Upper bounds for sorting integers on random access machines. Theor. Comp. Sc., 28:263–276, 1984. [20] K. Mehlhorn and S. N¨ ahler. Bounded ordered dictionaries in O(log log n) time and O(n) space. Inf. Proc. Lett., 35(4):183–189, 1990. [21] W. J. Paul and J. Simon. Decision trees and random access machines. In Logic and Algorithmic: An International Symposium Held in Honour of Ernst Specker, pages 331–340. L’Enseignement Math´ematique, Universit´e de Genev`e, 1982. [22] R. Raman. Priority queues: small, monotone and trans-dichotomous. In Proc. 4th ESA, LNCS 1136, pages 121–137, 1996. [23] M. Thorup. On RAM priority queues. SIAM J. Comp., 30(1):86–109, 2000. [24] M. Thorup. Equivalence between priority queues and sorting, 2002. in Proc. FOCS’02. [25] P. van Emde Boas. Preserving order in a forest in less than logarithmic time. In

Proceedings of the 16th Annual IEEE Symposium on Foundations of Computer Science, pages 75–84, 1975. [26] P. van Emde Boas. Preserving order in a forest in less than logarithmic time and linear space. Inf. Proc. Lett., 6(3):80–82, 1977. [27] P. van Emde Boas, R. Kaas, and E. Zijlstra. Design and implementation of an eﬃcient priority queue. Math. Syst. Theory, 10:99–127, 1977. [28] D. E. Willard. Examining computational geometry, van Emde Boas trees, and hashing from the perspective of the fusion tree. SIAM Journal on Computing, 29(3):1030– 1049, 2000. Announced at SODA’92.

© 2005 by Chapman & Hall/CRC

VI Data Structures in Languages and Libraries Chris Okasaki . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-1

40 Functional Data Structures

Introduction • Stacks: A Simple Example • Binary Search Trees: Path Copying Skew Heaps: Amortization and Lazy Evaluation • Diﬃculties • Further Reading

•

41 LEDA, a Platform for Combinatorial and Geometric Computing Stefan Naeher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-1 Introduction • The Structure of LEDA • Data Structures and Data Types rithms • Visualization • Example Programs • Projects Enabled by LEDA

•

Algo-

Mark Allen Weiss . . . . . . . . . . . . . . . . . . . . . . . . . . 42-1

42 Data Structures in C++ Introduction • Basic Containers Sample Code

•

Iterators

•

Additional Components of the STL

•

43 Data Structures in JDSL Michael T. Goodrich, Roberto Tamassia, and Luca Vismara . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-1 Introduction Application

•

Design Concepts in JDSL

44 Data Structure Visualization

•

The Architecture of JDSL

•

A Sample

John Stasko . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-1

Introduction • Value of Data Structure Rendering • Issues in Data Structure Visualization Systems • Existing Research and Systems • Summary and Open Problems

45 Drawing Trees

Sebastian Leipert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-1

Introduction • Preliminaries • Level Layout for Binary Trees • Level Layout for n-ary Trees • Radial Layout • HV-Layout

46 Drawing Graphs

Peter Eades and Seok-Hee Hong . . . . . . . . . . . . . . . . . . . . . 46-1

Introduction • Preliminaries Drawing • Conclusion

•

Convex Drawing

47 Concurrent Data Structures

•

Symmetric Drawing

•

Visibility

Mark Moir and Nir Shavit . . . . . . . . . . . . . 47-1

Designing Concurrent Data Structures • Shared Counters and Fetch-and-φ Structures • Stacks and Queues • Pools • Linked Lists • Hash Tables • Search Trees • Priority Queues • Summary

© 2005 by Chapman & Hall/CRC

40 Functional Data Structures 40.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40-1

Data Structures in Functional Languages • Functional Data Structures in Mainstream Languages

40.2 40.3 40.4

Stacks: A Simple Example . . . . . . . . . . . . . . . . . . . . . . . . Binary Search Trees: Path Copying . . . . . . . . . . . . . Skew Heaps: Amortization and Lazy Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40-3 40-6 40-7

Analysis of Lazy Skew Heaps

Chris Okasaki United States Military Academy

40.1

40.5 40.6

Diﬃculties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-14 Further Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-15

Introduction

A functional data structure is a data structure that is suitable for implementation in a functional programming language, or for coding in an ordinary language like C or Java using a functional style. Functional data structures are closely related to persistent data structures and immutable data structures—in fact, the three terms are often used interchangeably. However, there are subtle diﬀerences. • The term persistent data structures refers to the general class of data structures in which an update does not destroy the previous version of the data structure, but rather creates a new version that co-exists with the previous version. See Chapter 31 for more details about persistent data structures. • The term immutable data structures emphasizes a particular implementation technique for achieving persistence, in which memory devoted to a particular version of the data structure, once initialized, is never altered. • The term functional data structures emphasizes the language or coding style in which persistent data structures are implemented. Functional data structures are always immutable, except in a technical sense discussed in Section 40.4. In this chapter, we will discuss the main issues surrounding the implementation of data structures in functional languages, and illustrate these issues with several extended examples. We will also show how to adapt functional data structures to a mainstream language such as Java, for use when a persistent data structure is required. Readers wishing more details about functional data structures should consult Okasaki [24].

40-1

© 2005 by Chapman & Hall/CRC

40-2

40.1.1

Handbook of Data Structures and Applications

Data Structures in Functional Languages

Functional programming languages diﬀer in several important ways from ordinary programming languages like C or Java, and these diﬀerences can sometimes have a large eﬀect on how data structures are implemented. The main diﬀerences (at least from the perspective of data structures) are immutability, recursion, garbage collection, and pattern matching. Immutability

In functional languages, variables and records cannot be modiﬁed, or mutated, once they have been created.∗ Many textbook data structures depend critically on the ability to mutate variables and records via assignments. Such data structures can be diﬃcult to adapt to a functional setting. Recursion

Functional languages frequently do not support looping constructs, such as for-loops or while-loops, because such loops depend on being able to mutate the loop control variable. Functional programmers use recursion instead.† Garbage Collection

Functional languages almost always depend on automatic garbage collection. Because objects are immutable in functional languages, they are shared much more widely than in ordinary languages, which makes the task of deciding when to deallocate an object very complicated. In functional languages, programmers ignore deallocation issues and allow the garbage collector to deallocate objects when it is safe to do so. Pattern Matching

Pattern matching is a method of deﬁning functions by cases that are essentially textual analogues of the kinds of pictures data-structure designers often draw. Pattern matching is not supported by all functional languages, but, when available, it allows many data structures to be coded very concisely and elegantly.

40.1.2

Functional Data Structures in Mainstream Languages

Even if you are programming in a mainstream language, such as C or Java, you may ﬁnd it convenient to use a functional data structure. Functional data structures oﬀer three main advantages in such a setting: fewer bugs, increased sharing, and decreased synchronization. Fewer Bugs

A very common kind of bug arises when you observe a data structure in a certain state and shortly thereafter perform some action that assumes the data structure is still in that same state. Frequently, however, something has happened in the meantime to alter the state of the data structure, so that the action is no longer valid. Because functional data structures are immutable, such alterations simply cannot occur. If someone tries to change the data structure, they may produce a new version of it, but they will in no way eﬀect the version that you are using.

∗ Actually,

many functional languages do provide mechanisms for mutation, but their use is discouraged. higher-order functions, but we will not discuss higher-order functions further because they have relatively little eﬀect on the implementation of data structures. † Or

© 2005 by Chapman & Hall/CRC

Functional Data Structures

40-3

Increased Sharing

Precisely to avoid the kinds of bugs described above, programmers in mainstream languages are careful to limit access to their internal data structures. When sharing is unavoidable, programmers will often clone their data structures and share the clones rather than granting access to their own internal copies. In contrast, functional data structures can be shared safely without cloning. (Actually, functional data structures typically perform a substantial amount of cloning internally, but this cloning is of individual nodes rather than entire data structures.) Decreased Synchronization

Again, precisely to avoid the kinds of bugs described above, programmers in concurrent settings are careful to synchronize access to their data structures, so that only a single thread can access the data structure at a time. On the other hand, because functional data structures are immutable, they can often be used with little or no synchronization. Even simultaneous writes are not a problem, because each writer thread will get a new version of the data structure that reﬂects only its own updates. (This assumes, of course, an application where participants do not necessarily want to see changes made by all other participants.)

40.2

Stacks: A Simple Example

Stacks (see Chapter 2) represented as singly-linked lists are perhaps the simplest of all data structures to make persistent. We begin by describing functional stacks supporting four main primitives: • • • •

empty: a constant representing the empty stack. push(x,s): push the element x onto the stack s and return the new stack. top(s): return the top element of s. pop(s): remove the top element of s and return the new stack.

We can see right away several diﬀerences between this interface and the interface for ordinary stacks. First, for ordinary stacks, push and pop would implicitly change the existing stack s rather than returning a new stack. However, the hallmark of functional data structures is that update operations return a new version of the data structure rather than modifying the old version. Second, ordinary stacks would support a function or constructor to create a fresh, new stack, rather than oﬀering a single constant to represent all empty stacks. This highlights the increased sharing possible with functional data structures. Because pushing an element onto the empty stack will not change the empty stack, diﬀerent parts of the program can use the same empty stack without interfering with each other. Figure 40.1 shows an implementation of stacks in Haskell [28], a popular functional programming language. Figure 40.2 shows a similar implementation in Java. Like all code fragments in this chapter, these implementations are intended only to illustrate the relevant concepts and are not intended to be industrial strength. In particular, all error handling has been omitted. For example, the top and pop operations should check whether the stack is empty. Furthermore, programming conventions in Haskell and Java have been ignored where they would make the code harder for non-ﬂuent readers to understand. For example, the Haskell code makes no use of currying, and the Java code makes no attempt to be object-oriented. The Haskell code illustrates a simple use of pattern matching. The declaration

© 2005 by Chapman & Hall/CRC

40-4

Handbook of Data Structures and Applications

data Stack = Empty | Push(Element,Stack) empty = Empty push(x,s) = Push(x,s) top(Push(x,s)) = x pop(Push(x,s)) = s FIGURE 40.1: Stacks in Haskell. public class Stack { public static final Stack empty = null; public static Stack push(Element x,Stack s) { return new Stack(x,s); } public static Element top(Stack s) { return s.element; } public static Stack pop(Stack s) { return s.next; } private Element element; private Stack next; private Stack(Element element,Stack next) { this.element = element; this.next = next; } } FIGURE 40.2: Stacks in Java. data Stack = Empty | Push(Element,Stack) states that stacks have two possible shapes, Empty or Push, and that a stack with the Push shape has two ﬁelds, an element and another stack. The tags Empty and Push are called constructors. Later function declarations can match against these constructors. For example, the declaration top(Push(x,s)) = x says that when top is called on a stack with the Push shape, it returns the contents of the ﬁrst ﬁeld. If desired, more clauses can be added to deal with other shapes. For example, a second clause could be added to the deﬁnition of top to handle the error case: top(Push(x,s)) = x top(Empty) = ...signal an error... How do these implementations achieve persistence? First, consider the push operation. Calling push creates a new node containing the new element and a pointer to the old top of stack, but it in no way alters the old stack. For example, if the old stack s contains the numbers 3, 2, 1 and we push 4, then the new stack s contains the numbers 4, 3, 2, 1. Figure 40.3 illustrates the relationship between s and s . Notice how the nodes containing 3, 2, and 1 are shared between both stacks. Because of this sharing, it is crucial that the nodes are immutable. Consider what would happen if nodes could be changed. If we were to change the 3 to a 5, for example, perhaps by calling an operation to update the top element of s, that change would aﬀect not only s (which would now contain 5, 2, 1) but also s (which would now contain 4, 5, 2, 1). Such unintended consequences would make sharing impossible.

© 2005 by Chapman & Hall/CRC

Functional Data Structures

40-5

s = push(4, s) (Before) s 3

2

1

(After) s

s 4

3

2

1

FIGURE 40.3: The push operation. s = pop(s ) (Before) s

s 4

s

3

2

1

(After) s s

4

3

2

1

FIGURE 40.4: The pop operation. Next, consider the pop operation, which simply returns the next pointer of the current node without changing the current node in any way. For example, Figure 40.4 illustrates the result of popping the stack s to get the stack s (which shares its entire representation with the original stack s). Notice that, after popping s , the node containing 4 may or may not be garbage. It depends on whether any part of the program is still using the s stack. If not, then automatic garbage collection will eventually deallocate that node.

© 2005 by Chapman & Hall/CRC

40-6

Handbook of Data Structures and Applications

data Tree = Empty | Node(Tree,Int,Tree) empty = Empty insert(x,Empty) = Node(Empty,x,Empty) insert(x,Node(t1,y,t2)) = if x < y then Node(insert(x,t1),y,t2) else if x > y then Node(t1,y,insert(x,t2)) else Node(t1,y,t2) search(x,Empty) = False search(x,Node(t1,y,t2)) = if x < y then search(x,t1) else if x > y then search(x,t2) else True FIGURE 40.5: Binary search trees in Haskell.

40.3

Binary Search Trees: Path Copying

Stacks are unusual in that there is never a need to update an existing node. However, for most data structures, there is such a need. For example, consider inserting an element into a binary search tree (see Chapter 3). At the very least, we need to update the new node’s parent to point to the new node. But how can we do this if nodes are immutable? The solution is a technique called path copying. To update an existing node, we copy the node and make the necessary changes in the copy. However, we then have to update the existing node’s parent in a similar fashion to point to the copy. In this way, changes propagate all the way from the site of the update to the root, and we end up copying that entire path. That may seem like a lot of copying, but notice that all nodes not on that path are shared between the old and new versions. To see how path copying works in practice, consider a simple implementation of integer sets as unbalanced binary search trees. Figure 40.5 shows an implementation in Haskell and Figure 40.6 shows the same implementation in Java. The key to understanding path copying lies in the insert operation. Consider the case where the element being inserted is larger than the element at the current node. In the Java implementation, this case executes the code return new Tree(t.left,t.element,insert(x,t.right)); First, insert calls itself recursively on the right subtree, returning a pointer to the new right subtree. It then allocates a new tree node, copying the left and element ﬁelds from the old node, and installing the new pointer in the right ﬁeld. Finally, it returns a pointer to the new node. This process continues until it terminates at the root. Figure 40.7 illustrates a sample insertion. Notice how the parts of the tree not on the path from the root to the site of the update are shared between the old and new trees. This functional implementation of binary search trees has exactly the same time complexity as an ordinary non-persistent implementation. The running time of insert is still proportional to the length of the search path. Of course, the functional implementation allocates more space, but even that issue is not clear cut. If the old tree is no longer needed, then the just-copied nodes can immediately be garbage collected, leaving a net space increase of one node—exactly the same space required by a non-persistent implementation. On the other hand, if the old tree is still needed, then the just-copied nodes cannot be garbage collected, but in that case we are actively taking advantage of functionality not supported by ordinary binary search trees.

© 2005 by Chapman & Hall/CRC

Functional Data Structures

40-7

public class Tree { public static final Tree empty = null; public static Tree insert(int x,Tree t) { if (t == null) return new Tree(null,x,null); else if (x < t.element) return new Tree(insert(x,t.left),t.element,t.right); else if (x > t.element) return new Tree(t.left,t.element,insert(x,t.right)); else return t; } public static boolean search(int x,Tree t) { if (t == null) return false; else if (x < t.element) return search(x,t.left); else if (x > t.element) return search(x,t.right); else return true; } private int element; private Tree left,right; private Tree(Tree left,int element,Tree right) { this.left = left; this.element = element; this.right = right; } } FIGURE 40.6: Binary search trees in Java. Of course, the binary search trees described above suﬀer from the same limitations as ordinary unbalanced binary search trees, namely a linear time complexity in the worst case. Whether the implementation is functional or not as no eﬀect in this regard. However, we can easily apply the ideas of path copying to most kinds of balanced binary search trees (see Chapter 10), such as AVL trees [17, 29], red-black trees [25], 2-3 trees [30], and weight-balanced trees [2]. Such a functional implementation retains the logarithmic time complexity of the underlying design, but makes it persistent. Path copying is suﬃcient for implementing many tree-based data structures besides binary search trees, including binomial queues [7, 15] (Chapter 7), leftist heaps [18, 24] (Chapter 5), Patricia tries [26] (Chapter 28), and many others.

40.4

Skew Heaps: Amortization and Lazy Evaluation

Next, we turn to priority queues, or heaps, supporting the following primitives: • • • • •

empty: a constant representing the empty heap. insert(x,h): insert the element x into the heap h and return the new heap. findMin(h): return the minimum element of h. deleteMin(h): delete the minimum element of h and return the new heap. merge(h1,h2 ): combine the heaps h1 and h2 into a single heap and return the new heap.

© 2005 by Chapman & Hall/CRC

40-8

Handbook of Data Structures and Applications t = insert(8, t) (Before) t 4 2 1

6 3

5

7

(After) t 4

4

2 1

t

6 3

5

6 7

7 8

FIGURE 40.7: The insert operation. Many of the standard heap data structures can easily be adapted to a functional setting, including binomial queues [7, 15] and leftist heaps [18, 24]. In this section, we describe a simple, yet interesting, design known as skew heaps [32]. (Non-persistent skew heaps are described in detail in Chapter 6.) A skew heap is a heap-ordered binary tree. Each node contains a single element, and the nodes are ordered such that the element at each node is no larger than the elements at the node’s children. Because of this ordering, the minimum element in a tree is always at the root. Therefore, the findMin operation simply returns the element at the root. The insert and deleteMin operations are deﬁned in terms of merge: insert creates a new node and merges it with the existing heap, and deleteMin discards the root and merges its children. The interesting operation is merge. Assuming both heaps are non-empty, merge compares their roots. The smaller root (that is, the root with the smaller element) becomes the new overall root and its children are swapped. Then the larger root is merged with the new left child of the smaller root (which used to be the right child). The net eﬀect of a merge is to interleave the rightmost paths of the two trees in sorted order, swapping the children of nodes along the way. This process is illustrated in Figure 40.8. Notice how the nodes on the rightmost paths of the arguments end up on the leftmost path of the result. A Haskell implementation of skew heaps incorporating path copying is shown in Figure 40.9. A naive Java implementation is shown in Figure 40.10. Skew heaps are not balanced, and individual operations can take linear time in the worst case. For example, Figure 40.11 shows an unbalanced shew heap generated by inserting the elements 5, 6, 4, 6, 3, 6, 2, 6, 1, 6

© 2005 by Chapman & Hall/CRC

Functional Data Structures

40-9

1 6

2 7

8 5

=⇒

3

merge

4

1 2

9

3 4 5

6 7

8 9

FIGURE 40.8: Merging two skew heaps. data Skew = Empty | Node(Int,Skew,Skew) empty = Empty insert(x,s) = merge(Node(x,Empty,Empty),s) findMin(Node(x,s1,s2)) = x deleteMin(Node(x,s1,s2)) = merge(s1,s2) merge(s1,Empty) = s1 merge(Empty,s2) = s2 merge(Node(x,s1,s2),Node(y,t1,t2)) = if x < y then Node(x,merge(Node(y,t1,t2),s2),s1) else Node(y,merge(Node(x,s1,s2),t2),t1) FIGURE 40.9: Skew heaps in Haskell. into an initially empty heap. Inserting a new element such as 7 into this unbalanced skew heap would take linear time. However, in spite of the fact that any one operation can be ineﬃcient, the way that children are regularly swapped keeps the operations eﬃcient in the amortized sense—insert, deleteMin, and merge run in logarithmic amortized time [32]. Or, at least, those would be the bounds for non-persistent skew heaps. When we analyze skew heaps in a persistent setting, we receive a nasty shock. Making an amortized data structure such as skew heaps persistent using path copying breaks its amortized bounds! In the case of skew heaps, naively incorporating path copying causes the logarithmic amortized bounds to degrade to the linear worst-case bounds. Consider, for example, the unbalanced skew heap s in Figure 40.11, for which insert takes linear time for large elements. The result of the insert is a new skew heap s . Performing another insert on s would actually be quite eﬃcient, but because these structures are persistent, we are free to ignore s and perform the next insert on the old skew heap s instead. This insert again takes linear time. We can continue performing operations on the old skew heap as often as we want. The average cost per operation over a sequence of such operations is linear, which means that the amortized cost per operation is now linear, rather than logarithmic. Simple experiments on the Java implementation from Figure 40.10 conﬁrm this analysis.

© 2005 by Chapman & Hall/CRC

40-10

Handbook of Data Structures and Applications

public class Skew { public static final Skew empty = null; public static Skew insert(int x,Skew s) { return merge(new Skew(x,null,null),s); } public static int findMin(Skew s) { return s.element; } public static Skew deleteMin(Skew s) { return merge(s.left,s.right); } public static Skew merge(Skew s,Skew t) { if (t == null) return s; else if (s == null) return t; else if (s.element < t.element) return new Skew(s.element,merge(t,s.right),s.left); else return new Skew(t.element,merge(s,t.right),t.left); } private int element; private Skew left,right; private Skew(int element, Skew left, Skew right) { this.element = element; this.left = left; this.right = right; } } FIGURE 40.10: First attempt at skew heaps in Java 1 6

2 6

3 6

4 6

5 6

FIGURE 40.11: An unbalanced skew heap. However, if we repeat those experiments on the Haskell implementation from Figure 40.9, we do not observe linear behavior. Instead, the operations appear to retain their logarithmic amortized bounds, even under persistent usage. This pleasant result is a consequence of a fortuitous interaction between path copying and a property of the Haskell language called lazy evaluation. (Many other functional programming languages also support lazy evaluation).

© 2005 by Chapman & Hall/CRC

Functional Data Structures

40-11

Under lazy evaluation, operations such as merge are not actually executed until their results are needed. Instead, a new kind of node that we might call a pending merge is automatically created. The pending merge lays dormant until some other operation such as findMin needs to know the result. Then and only then is the pending merge executed. The node representing the pending merge is overwritten with the result so that it cannot be executed twice. Although Java does not directly support lazy evaluation, it is easy to simulate, as shown in Figure 40.12. A minor diﬀerence between the lazy Java implementation and the Haskell implementation is that the Java implementation avoids creating pending merge nodes when one of the arguments is null. A crucial aspect of lazy evaluation is that a pending computation, once triggered, is executed only far enough to produce the part of the result that is needed. The remaining parts of the computation may be delayed further by creating new pending nodes. In the case of the merge operation, this means that when a pending merge is executed, the two roots are compared and the children of the smaller root are swapped as normal, but the recursive merge of the larger root with the former right child of the smaller root is not performed. Instead, a new pending merge is created and installed as the left child of the new root node. This process is illustrated in Figure 40.13, with the pending merges drawn as diamonds. Figure 40.14 illustrates the propagation of pending merges through a sequence of operations. First, the initial tree is built via a series of inserts. Then findMin executes those pending merges to ﬁnd the value of the root. Next, deleteMin deletes the root and creates a new pending merge of the two children. Finally, findMin again executes the pending merges to ﬁnd the new value of the root. Notice that pending nodes and lazy evaluation aﬀect when the various steps of a merge are carried out, but that they do not aﬀect the end results of those steps. After all the pending merges have been executed, the ﬁnal tree is identical to the one produced by skew heaps without lazy evaluation. Strictly speaking, the nodes of a lazy skew heap can no longer be called immutable. In particular, when a pending merge is executed, the node representing the pending merge is updated with the result so that it cannot be executed twice. Functional languages typically allow this kind of mutation, known as memoization, because it is invisible to the user, except in terms of eﬃciency. Suppose that memoization was not performed. Then pending merges might be executed multiple times. However, every time a given pending merge was executed, it would produce the same result. Therefore, memoization is an optimization that makes lazy evaluation run faster, but that has no eﬀect on the output of any computation.

40.4.1

Analysis of Lazy Skew Heaps

Next, we prove that merge on lazy skew heaps runs in logarithmic amortized time. We use the banker’s method, associating a certain number of credits with each pending merge. We begin with a few deﬁnitions. The logical view of a tree is what the tree would look like if all of its pending merges were executed. The logical left spine of a tree is the leftmost path from the root in the logical view. Similarly, the logical right spine of a tree is the rightmost path from the root in the logical view. A pending node is called left-heavy if its left subtree is at least as large as its right subtree in the logical view, or right-heavy if its right subtree is larger than its left subtree in the logical view. The successor of a pending node is the new pending node that is created as the new left child of the existing node when the existing node is executed. Now, we charge one credit to execute a single pending merge. This credit pays for the

© 2005 by Chapman & Hall/CRC

40-12

Handbook of Data Structures and Applications

public class Skew { public static final Skew empty = null; public static Skew insert(int x,Skew s) { return merge(new Skew(x,null,null),s); } public static int findMin(Skew s) { executePendingMerge(s); return s.element; } public static Skew deleteMin(Skew s) { executePendingMerge(s); return merge(s.left,s.right); } public static Skew merge(Skew s,Skew t) { if (t == null) return s; else if (s == null) return t; else return new Skew(s,t); // create a pending merge } private static void executePendingMerge(Skew s) { if (s != null && s.pendingMerge) { Skew s1 = s.left, s2 = s.right; executePendingMerge(s1); executePendingMerge(s2); if (s2.element < s1.element) { Skew tmp = s1; s1 = s2; s2 = tmp; } s.element = s1.element; s.left = merge(s2,s1.right); s.right = s1.left; s.pendingMerge = false; } } private boolean pendingMerge; private int element; private Skew left,right; private Skew(int element, Skew left, Skew right) { this.element = element; this.left = left; this.right = right; pendingMerge = false; } private Skew(Skew left,Skew right) { // create a pending merge this.left = left; this.right = right; pendingMerge = true; } } FIGURE 40.12: Skew heaps with lazy evaluation in Java.

© 2005 by Chapman & Hall/CRC

Functional Data Structures

40-13

=⇒ 1

3 8

2

7

1

9

3

4

8

4

5

9

2 5

FIGURE 40.13: Executing a pending merge.

(a) insert 2,3,1,6,4,5,7

(b) findMin (returns 1) 1

7 5

7 4

5 4

6

6

2 3

1 3

2

(c) deleteMin

(d) findMin (returns 2) 2

7

5 4

2

6

5

4

7

3

6

3 FIGURE 40.14: A sequence of operations on skew heaps.

© 2005 by Chapman & Hall/CRC

7

40-14

Handbook of Data Structures and Applications

comparison, the allocation of the successor node, and all necessary pointer manipulations, but it does not pay for executing the child nodes if they happen to be pending merges as well. When a right-heavy pending node is executed, it spends one of its own credits. When a left-heavy pending node is executed, the credit must be supplied either by its parent node, if it has one, or by the heap operation that originated the request, if the node is a root. This adds a single credit to the costs of the insert and deleteMin operations. After a pending node is executed, it passes any remaining credits to its successor node. When we create a pending node, we must provide it with all the credits it will ever need. This includes • one credit for itself, if it is right-heavy, • one credit for each child that is a left-heavy pending node, and • any credits needed by its successors. Notice that a pending node and its successors all lay on the logical left spine of the resulting tree in the logical view. Similarly, the physical children of a pending node and its successors all lay on the logical right spines of the argument trees to the original merge. Therefore, the number of credits that we must create during a merge is bounded by the number of right-heavy nodes in the logical left spine of the resulting tree plus the numbers of left-heavy nodes in the logical right spines of the argument trees. It is easy to see that the number of right-heavy nodes in a logical left spine is at most logarithmic in the size of the logical view. Similarly, the number of left-heavy nodes in a logical right spine is at most logarithmic in the size of the logical view. The total number of credits created by merge is therefore bounded by the sum of three logarithmic values, and thus is logarithmic itself.

40.5

Diﬃculties

As this chapter has shown, many data structures work quite nicely in a functional setting. However, some do not. We close with a description of several warning signs to watch for. • Random access: All of the data structures described in this chapter have been pointer-based. Unfortunately, data structures that depend on arrays—such as hash tables—are more diﬃcult to handle. No entirely satisfactory approach is known for making arrays persistent. The best known approach from a theoretical point of view is that of Dietz [6], in which array accesses run in O(log log n) expected amortized time. However, his approach is quite complicated and diﬃcult to implement. Competing approaches, such as [1, 4, 27], degrade to logarithmic (or worse!) time per access in common cases. • Cycles: Not all pointer-based data structures are suitable for implementation in a functional setting. The most common problem is the presence of cycles, such as those found in doubly-linked lists or in binary search trees with parent pointers. Path copying requires copying all paths from the root to the site of the update. In the presence of cycles, this frequently means copying the entire data structure. • Multiple entrypoints: Even without cycles, a pointer-based data structure can run into diﬃculties if it has multiple entrypoints. For example, consider a pointerbased implementation of the union-ﬁnd data structure [33]. All the pointers go from children to parents, so there are no cycles (except sometimes trivial ones at the roots). However, it is common for every node of the union-ﬁnd data structure to be a potential entrypoint, rather than just the root(s). Path copying requires

© 2005 by Chapman & Hall/CRC

Functional Data Structures

40-15

copying all paths from any entrypoint to the site of the update. With multiple entrypoints, this again frequently degrades into copying the entire data structure. • Unpredictable access patterns: Section 40.4 described how to use lazy evaluation to make an amortized data structure persistent. Although this works for many amortized data structures, such as skew heaps [32], it does not work for all amortized data structures. In particular, data structures with highly unpredictable access patterns, such as splay trees [31] (see Chapter 12), are diﬃcult to make persistent in this fashion.

40.6

Further Reading

The most complete general reference on functional data structures is Okasaki [24]. For more information on speciﬁc data structures, consult the following sources: • • • •

queues and deques [5, 10, 11, 21] priority queues and priority search queues [3, 8] random-access lists and ﬂexible arrays [9, 12, 13, 16, 20, 23] catenable lists and deques [14, 19, 22]

Acknowledgments This work was supported, in part, by the National Science Foundation under grant CCR0098288. The views expressed in this chapter are those of the author and do not reﬂect the oﬃcial policy or position of the United States Military Academy, the Department of the Army, the Department of Defense, or the U.S. Government.

References [1] A. Aasa, S. Holmstr¨ om, and C. Nilsson. An eﬃciency comparison of some representations of purely functional arrays. BIT, 28(3):490–503, 1988. [2] S. Adams. Eﬃcient sets—a balancing act. Journal of Functional Programming, 3(4):553–561, Oct. 1993. [3] G. S. Brodal and C. Okasaki. Optimal purely functional priority queues. Journal of Functional Programming, 6(6):839–857, Nov. 1996. [4] T. Chuang. A randomized implementation of multiple functional arrays. In ACM Conference on LISP and Functional Programming, pages 173–184, June 1994. [5] T. Chuang and B. Goldberg. Real-time deques, multihead Turing machines, and purely functional programming. In Conference on Functional Programming Languages and Computer Architecture, pages 289–298, June 1993. [6] P. F. Dietz. Fully persistent arrays. In Workshop on Algorithms and Data Structures, volume 382 of LNCS, pages 67–74. Springer-Verlag, Aug. 1989. [7] R. Hinze. Explaining binomial heaps. Journal of Functional Programming, 9(1):93– 104, Jan. 1999. [8] R. Hinze. A simple implementation technique for priority search queues. In ACM SIGPLAN International Conference on Functional Programming, pages 110–121, Sept. 2001. [9] R. Hinze. Bootstrapping one-sided ﬂexible arrays. In ACM SIGPLAN International Conference on Functional Programming, pages 2–13, Sept. 2002.

© 2005 by Chapman & Hall/CRC

40-16

Handbook of Data Structures and Applications

[10] R. Hood. The Eﬃcient Implementation of Very-High-Level Programming Language Constructs. PhD thesis, Department of Computer Science, Cornell University, Aug. 1982. (Cornell TR 82-503). [11] R. Hood and R. Melville. Real-time queue operations in pure Lisp. Inf. Process. Lett., 13(2):50–53, Nov. 1981. [12] R. R. Hoogerwoord. A logarithmic implementation of ﬂexible arrays. In Conference on Mathematics of Program Construction, volume 669 of LNCS, pages 191–207. Springer-Verlag, July 1992. [13] A. Kaldewaij and V. J. Dielissen. Leaf trees. Sci. Comput. Programming, 26(1– 3):149–165, May 1996. [14] H. Kaplan and R. E. Tarjan. Purely functional, real-time deques with catenation. J. ACM, 46(5):577–603, Sept. 1999. [15] D. J. King. Functional binomial queues. In Glasgow Workshop on Functional Programming, pages 141–150, Sept. 1994. [16] E. W. Myers. An applicative random-access stack. Inf. Process. Lett., 17(5):241–248, Dec. 1983. [17] E. W. Myers. Eﬃcient applicative data types. In ACM Symposium on Principles of Programming Languages, pages 66–75, Jan. 1984. [18] M. N´ un ˜ez, P. Palao, and R. Pe˜ na. A second year course on data structures based on functional programming. In Functional Programming Languages in Education, volume 1022 of LNCS, pages 65–84. Springer-Verlag, Dec. 1995. [19] C. Okasaki. Amortization, lazy evaluation, and persistence: Lists with catenation via lazy linking. In IEEE Symposium on Foundations of Computer Science, pages 646–654, Oct. 1995. [20] C. Okasaki. Purely functional random-access lists. In Conference on Functional Programming Languages and Computer Architecture, pages 86–95, June 1995. [21] C. Okasaki. Simple and eﬃcient purely functional queues and deques. Journal of Functional Programming, 5(4):583–592, Oct. 1995. [22] C. Okasaki. Catenable double-ended queues. In ACM SIGPLAN International Conference on Functional Programming, pages 66–74, June 1997. [23] C. Okasaki. Three algorithms on Braun trees. Journal of Functional Programming, 7(6):661–666, Nov. 1997. [24] C. Okasaki. Purely Functional Data Structures. Cambridge University Press, 1998. [25] C. Okasaki. Red-black trees in a functional setting. Journal of Functional Programming, 9(4):471–477, July 1999. [26] C. Okasaki and A. Gill. Fast mergeable integer maps. In Workshop on ML, pages 77–86, Sept. 1998. [27] M. E. O’Neill and F. W. Burton. A new method for functional arrays. Journal of Functional Programming, 7(5):487–513, Sept. 1997. [28] S. Peyton Jones et al. Haskell 98: A non-strict, purely functional language. http://haskell.org/onlinereport/, Feb. 1999. [29] F. Rabhi and G. Lapalme. Algorithms: A Functional Programming Approach. Addison-Wesley, 1999. [30] C. M. P. Reade. Balanced trees with removals: an exercise in rewriting and proof. Sci. Comput. Programming, 18(2):181–204, Apr. 1992. [31] D. D. K. Sleator and R. E. Tarjan. Self-adjusting binary search trees. J. ACM, 32(3):652–686, July 1985. [32] D. D. K. Sleator and R. E. Tarjan. Self-adjusting heaps. SIAM J. Comput., 15(1):52– 69, Feb. 1986. [33] R. E. Tarjan. Data Structures and Network Algorithms, volume 44 of CBMS Re-

© 2005 by Chapman & Hall/CRC

Functional Data Structures

40-17

gional Conference Series in Applied Mathematics. Society for Industrial and Applied Mathematics, Philadelphia, 1983.

© 2005 by Chapman & Hall/CRC

41 LEDA, a Platform for Combinatorial and Geometric Computing 41.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ease of Use • Extensibility Availability and Usage

41.2 41.3

•

Correctness

The Structure of LEDA . . . . . . . . . . . . . . . . . . . . . . . . . . . Data Structures and Data Types . . . . . . . . . . . . . . . . Basic Data Types • Numbers and Matrices • Advanced Data Types • Graph Data Structures Geometry Kernels • Advanced Geometric Data Structures

41.4 41.5

41.1

41-5 41-6

GeoWin

Example Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41-9

Word Count • Shortest Paths • Curve Reconstruction • Upper Convex Hull • Delaunay Flipping • Discussion

Stefan Naeher University of Trier

•

41-3 41-4

•

Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Visualization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GraphWin

41.6

41-1

•

41.7

Projects Enabled by LEDA . . . . . . . . . . . . . . . . . . . . . . . 41-17

Introduction

Leda, the Library of Eﬃcient Data Types and Algorithms, aims at being a comprehensive software platform for the area of combinatorial and geometric computing. It provides a sizable collection of data types and algorithms in C++. This collection includes most of the data types and algorithms described in the text books of the area ([1, 6, 9, 10, 15–17, 19–21]). Leda supports a broad range of applications. It has already been used in such diverse areas as code optimization, VLSI design, graph drawing, graphics, robot motion planning, traﬃc scheduling, geographic information systems, machine learning and computational biology. The Leda project was started in 1988 by Kurt Mehlhorn and Stefan N¨ aher. The ﬁrst months they spent on the speciﬁcation of diﬀerent data types and on selecting the implementation language. At that time the item concept came up as an abstraction of the notion “pointer into a data structure”. Items provide direct and eﬃcient access to data and are similar to iterators in the standard template library. The item concept worked successfully for all test cases and is now used for most data types in Leda. Concurrently with searching for the correct speciﬁcations several languages were investigated for their suitability as an implementation platform. Among the candidates were Smalltalk, Modula, Ada, Eiﬀel, and C++. The language had to support abstract data types and type parameters (genericity)

41-1

© 2005 by Chapman & Hall/CRC

41-2

Handbook of Data Structures and Applications

and should be widely available. Based on the experiences with diﬀerent example programs C++ was selected because of its ﬂexibility, expressive power, and availability. We discuss some of the general aspects of the Leda system.

41.1.1

Ease of Use

The library is easy to use. In fact, only a small fraction of the users are algorithms experts and many users are not even computer scientists. For these users the broad scope of the library, its ease of use, and the correctness and eﬃciency of the algorithms in the library are crucial. The Leda manual [11] gives precise and readable speciﬁcations for the data types and algorithms mentioned above. The speciﬁcations are short (typically not more than a page), general (so as to allow several implementations) and abstract (so as to hide all details of the implementation).

41.1.2

Extensibility

Combinatorial and geometric computing is a diverse area and hence it is impossible for a library to provide ready-made solutions for all application problems. For this reason it is important that Leda is easily extendible and can be used as a platform for further software development. In many cases Leda programs are very close to the typical text book presentation of the underlying algorithms. The goal is the equation Algorithm + Leda = Program. Leda extension packages (LEPs) extend Leda into particular application domains and areas of algorithmics not covered by the core system. Leda extension packages satisfy requirements, which guarantee compatibility with the Leda philosophy. LEPs have a Leda-style documentation, they are implemented as platform independent as possible and the installation process allows a close integration into the Leda core library. Currently, the following LEPs are available: PQ-trees, dynamic graph algorithms, a homogeneous d-dimensional geometry kernel, and a library for graph drawing.

41.1.3

Correctness

Programming is a notoriously error-prone task; this is even true when programming is interpreted in a narrow sense: going from a (correct) algorithm to a program. The standard way to guard against coding errors is program testing. The program is exercised on inputs for which the output is known by other means, typically as the output of an alternative program for the same task. Program testing has severe limitations. It is usually only done during the testing phase of a program. Also, it is diﬃcult to determine the “correct” suite of test inputs. Even if appropriate test inputs are known it is usually diﬃcult to determine the correct outputs for these inputs: alternative programs may have diﬀerent input and output conventions or may be too ineﬃcient to solve the test cases. Given that program veriﬁcation, i.e., formal proof of correctness of an implementation, will not be available on a practical scale for some years to come, program checking has been proposed as an extension to testing [3, 4]. The cited papers explored program checking in the area of algebraic, numerical, and combinatorial computing. In [8, 14, 28] program checkers are presented for planarity testing and a variety of geometric tasks. Leda uses program checkers for many of its implementations. In computational geometry the correctness problem is even more diﬃcult because geometric algorithms are frequently formulated under two unrealistic assumptions: computers are assumed to use exact real arithmetic (in the sense of mathematics) and inputs are

© 2005 by Chapman & Hall/CRC

LEDA, a Platform for Combinatorial and Geometric Computing

41-3

assumed to be in general position. The naive use of ﬂoating point arithmetic as an approximation to exact real arithmetic very rarely leads to correct implementations. In a sequence of papers [5, 12, 18, 22, 24] the degeneracy and precision issues have been investigated and Leda was extended based on this theoretical work. It now provides exact geometric kernels for two-dimensional and higher dimensional computational geometry [26] and also correct implementations for basic geometric tasks, e.g., two-dimensional convex hulls, Delaunay diagrams, Voronoi diagrams, point location, line segment intersection, and higher-dimensional convex hulls and Delaunay triangulations. An elegant (theoretical) approach to the degeneracy problem is symbolic perturbation. However, this method of forcing input data into general position can cause some serious problems in practice. In many cases, it increases the complexity of (intermediate) results considerably and furthermore, the ﬁnal limit process turns out to be very diﬃcult in particular in the presence of combinatorial structures. For this reason, Leda follows a diﬀerent approach. It copes with degeneracies directly by treating the degenerate case as the “normal” case. This approach proved to be very eﬀective for many geometric problems.

41.1.4

Availability and Usage

Leda is realized in C++ and can be used on many diﬀerent platforms with many diﬀerent compilers. Leda is now used at many academic sites. A commercial version of Leda is marketed by Algorithmic Solutions Software GmbH (<www.algorithmic-solutions.com>).

41.2

The Structure of LEDA

Leda uses templates for the implementation of parameterized data types and for generic algorithms. However, it is not a pure template library and therefore is based on a number of object code libraries of precompiled code. Programs using Leda data types or algorithms have to include the appropriate Leda header ﬁles into their source code and have to be linked with one or more of these libraries. The four object code libraries are built on top of each other. Here, we only give a short overview. Consult the Leda user manual ([11] or the Leda book ([27]) for a detailed description. • The Basic Library (libL) contains system dependent code, basic data structures, numbers and types for linear algebra, dictionaries, priority queues, partitions, and many more basic data structures and algorithms. • The Graph Library (libG) contains diﬀerent types of graphs and a large collection of graph and network algorithms • The 2D Geometry Library (libP) contains the two-dimensional geometric kernels advanced geometric data structures, and a large number of algorithms for two-dimensional geometric problems. • The 3D Geometry Library (libP) contains the three-dimensional kernels and some algorithms for three-dimensional problems. • The Window Library(libW) supports graphical output and user interaction for both the X11 platform (Unix) and Microsoft Windows systems. It also contains animation support: GraphWin, a powerful graph editor, and GeoWin, a interactive tool for the visualization of geometric algorithms. See Section 41.5 for details.

© 2005 by Chapman & Hall/CRC

41-4

41.3

Handbook of Data Structures and Applications

Data Structures and Data Types

Leda contains a large number of data structures from the diﬀerent areas of combinatorial and geometric computing. However, as indicated in the name of the library, Leda was not designed as a collection of data structures but as a library of (parameterized) data types. For each (abstract) data type in the library there is at least one data structure which implements this type. This separation of speciﬁcation (by an abstract data type) and implementation (by an actual data structure) is crucial for a software component library. It allows to change the underlying implementation or to choose between diﬀerent implementations without having to change the application program. In general, there is one default data structure for each of the advanced data types, e.g avl-trees for dictionaries, skiplists for sorted sequences, binary heaps for priority queues, and a union-ﬁnd structure for partitions. For most of these data types a number of additional data structures are available and can be speciﬁed by an optional template argument. For instance dictionary<string,int,skiplist> speciﬁes a dictionary type with key type string and information type int which is implemented by the skiplist data structure (see [27] for more details and Section 41.6.1 for an example).

41.3.1

Basic Data Types

Of course, Leda contains a complete collection of all basic data types, such as strings, stacks, queues, lists, arrays, tuples . . . which are ubiquitous in all areas of computing.

41.3.2

Numbers and Matrices

Numbers are at the origin of computing. We all learn about integers, rationals, and real numbers during our education. Unfortunately, the number types int , ﬂoat , and double provided by C++ are only crude approximations of their mathematical counterparts: there are only ﬁnitely many numbers of each type and for ﬂoats and doubles the arithmetic incurs rounding errors. Leda oﬀers the additional number types integer , rational , bigﬂoat , and real . The ﬁrst two are the exact realization of the corresponding mathematical types and the latter two are better approximations of the real numbers. Vectors and matrices are oneand two-dimensional arrays of numbers, respectively. They provide the basic operations of linear algebra.

41.3.3

Advanced Data Types

A collection of parameterized data types representing sets, partitions, dictionaries, priority queues, sorted sequences, partitions and sparse arrays (maps, dictionary and hashing arrays). Type parameters include the key, information, priority, or element type and (optional) the data structure used for the implementation of the type. The list of data structures includes skiplists (see Chapter 13), (a, b)-trees, avl-trees, red-black trees, bb[α]trees (see Chapter 10), randomized search trees (see Chapter 13), Fibonacci-heaps, binary heaps, pairing heaps (see Chapter 7), redistributive heaps, union ﬁnd with path compression (Chapter 33), dynamic perfect hashing, cuckoo hashing (see Chapter 9), Emde-Boas trees, . . . . This list of data structures is continuously growing and adapted to new results from the area for data structures and algorithms.

© 2005 by Chapman & Hall/CRC

LEDA, a Platform for Combinatorial and Geometric Computing

41.3.4

41-5

Graph Data Structures

The graph data type (Chapter 4) is one of the central data types in Leda. It oﬀers the standard iterations such as “for all nodes v of a graph G do” (written f orall nodes(v, G)) or “for all edges e incident to a node v do” (written f orall out edges(e, v)), it allows to add and delete vertices and edges and it oﬀers arrays and matrices indexed by nodes and edges, (see [27] chapter 6 for details and Section 41.6.2 for an example program). The data type graph allows to write programs for graph problems in a form very close to the typical text book presentation.

41.3.5

Geometry Kernels

Leda oﬀers kernels for two- and three-dimensional geometry, a kernel of arbitrary dimension is available as an extension package. In either case there exists a version of the kernel based on ﬂoating point Cartesian coordinates (called ﬂoat-kernel) as well as a kernel based on rational homogeneous coordinates (called rat-kernel). All kernels provide a complete collection of geometric objects (points, segments, rays, lines, circles, simplices, polygons, planes, etc.) together with a large set of geometric primitives and predicates (orientation of points, side-of-circle tests, side-of-hyperplane, intersection tests and computation, etc.). For a detailed discussion and the precise speciﬁcation see Chapter 9 of the Leda book ([27]). Note that only for the rational kernel, which is based on exact arithmetic and ﬂoating-point ﬁlters, all operations and primitives are guaranteed to compute the correct result.

41.3.6

Advanced Geometric Data Structures

In addition to the basic kernel data structures Leda provides many advanced data types for computational geometry. Examples are • a general polygon type (gen polygon or rat gen polygon) with a complete set of boolean operations. Its implementation is based on an eﬃcient and robust plane sweep algorithms for the construction of the arrangement of a set of straight line segments (see [13] and [27] chapter 10.7 for a detailed description). • two- and higher-dimensional geometric tree structures, such as range, segment, interval and priority search trees (see Chapter 18). • partially and fully persistent search trees (Chapter 31). • diﬀerent kinds of geometric graphs (triangulations, Voronoi diagrams, and arrangements) • a dynamic point set data type supporting update, search, closest point, and diﬀerent types of range query operations on one single representation which is based on a dynamic Delaunay triangulation (see [27] chapter 10.6).

41.4

Algorithms

The Leda project had never the goal to provide a complete collection of all algorithms. Leda was designed and implemented to establish a platform for combinatorial and geometric computing enabling programmers to implement these algorithms themselves more easily and customized to their particular needs. But of course the library already contains a considerable number of standard algorithms.

© 2005 by Chapman & Hall/CRC

41-6

Handbook of Data Structures and Applications

Here we give a brief overview and refer the reader to the user manual for precise speciﬁcations and to chapter 10 of the Leda-book ([27]) for a detailed description and analysis of the corresponding implementations. In the current version Leda oﬀers diﬀerent implementation of algorithms for the following problems: • • • • • • • • • • • • • • • • • • • • • •

sorting and searching basic graph properties graph traversals diﬀerent kinds of connected components planarity test and embeddings minimum spanning trees shortest paths network ﬂows maximum weight and cardinality matchings graph drawing convex hulls (also three-dimensional) half-plane intersections (constraint) triangulations closest and farthest Delaunay and Voronoi diagrams Euclidean minimum spanning trees closest pairs boolean operations on generalized polygons segment intersection and construction of line arrangements Minkowski sums and diﬀerences nearest neighbors and closest points minimum enclosing circles and annuli curve reconstruction

41.5

Visualization

Visualization and animation of programs is very important for the understanding, presentation, and debugging of algorithms (see Chapter 44). Leda provides two powerful tools for interactive visualization and animation of data structures and algorithms:

41.5.1

GraphWin

The GraphWin data type (see [27], chapter 12) combines the graph and the window data type. An object of type GraphWin (short: a GraphWin) is a window, a graph, and a drawing of the graph, all at once. The graph and its drawing can be modiﬁed either by mouse operations or by running a graph algorithm on the graph. The GraphWin data type can be used to: • construct and display graphs, • visualize graphs and the results of graph algorithms, • write interactive demos for graph algorithms,

© 2005 by Chapman & Hall/CRC

LEDA, a Platform for Combinatorial and Geometric Computing

41-7

FIGURE 41.1: A GraphWin. The display part of the window shows a graph G and the panel part of the window features the default menu of a GraphWin. G can be edited interactively, e.g., nodes and edges can be added, deleted, and moved around. It is also possible to run graph algorithms on G and to display their result or to animate their execution.

• animate graph algorithms. All demos and animations of graph algorithms in Leda are based on GraphWin, many of the drawings in the Leda book ([27]) have been made with GraphWin, and many of the geometry demos in Leda have a GraphWin button that allows us to view the graph structure underlying a geometric object. GraphWin can easily be used in programs for constructing, displaying and manipulating graphs and for animating and debugging graph algorithms. It oﬀers both a programming and an interactive interface, most applications use both of them.

© 2005 by Chapman & Hall/CRC

41-8

41.5.2

Handbook of Data Structures and Applications

GeoWin

GeoWin ([23]) is a generic tool for the interactive visualization of geometric algorithms. GeoWin is implemented as a C++data type. It provides support for a number of programming techniques which have shown to be very useful for the visualization and animation of algorithms. The animations use smooth transitions to show the result of geometric algorithms on dynamic user-manipulated input objects, e.g., the Voronoi diagram of a set of moving points or the result of a sweep algorithm that is controlled by dragging the sweep line with the mouse (see Figure 41.2).

FIGURE 41.2: GeoWin animating Fortune’s Sweep Algorithm.

A GeoWin maintains one or more geometric scenes. A geometric scene is a collection of geometric objects of the same type. A collection is simply either a standard C++-list (STL-list) or a Leda-list of objects. GeoWin requires that the objects provide a certain functionality, such as stream input and output, basic geometric transformations, drawing and input in a Leda window. A precise deﬁnition of the required operations can be found

© 2005 by Chapman & Hall/CRC

LEDA, a Platform for Combinatorial and Geometric Computing

41-9

in the manual pages [11]. GeoWin can be used for any collection of basic geometric objects (geometry kernel) fulﬁlling these requirements. The visualization of a scene is controlled by a number of attributes, such as color, line width, line style, etc. A scene can be subject to user interaction and it may be deﬁned from other scenes by means of an algorithm (a C++ function). In the latter case the scene (also called result scene) may be recomputed whenever one of the scenes on which it depends is modiﬁed. There are three main modes for re-computation: user-driven, continuous, and event-driven. GeoWin has both an interactive and a programming interface. The interactive interface supports the interactive manipulation of input scenes, the change of geometric attributes, and the selection of scenes for visualization.

41.6

Example Programs

In this section we give several programming examples showing how Leda can be used to implement combinatorial and geometric algorithms in a very elegant and readable way. In each case we will ﬁrst state the algorithm and then show the program. It is not essential to understand the algorithms in full detail; our goal is to show: • how easily the algorithms are transferred into programs and • how natural and elegant the programs are. In other words, Algorithm + Leda = Program.

41.6.1

Word Count

We start with a very simple program. The task is to read a sequence of strings from standard input, to count the number of occurrences of each string in the input, and to print a list of all occurring strings together with their frequencies on standard output. The program uses the Leda types string and d array (dictionary arrays). The parameterized data type d array realizes arrays with index type I and element type E. We use it with index type string and element type int. #include #include int main() { d_array<string,int,skiplist> N(0); string s; while (cin >> s) N[s]++; forall_defined(s,N) cout << s << " " << N[s] << endl; } We give some more explanations. The program starts with the include statement for dictionary arrays and skiplists. In the ﬁrst line of the main program we deﬁne a dictionary array N with index type string, element type int and implementation skiplist and initialize all entries of the array to zero. Conceptually, this creates an inﬁnite array with one entry for each conceivable string and sets all entries to zero; the implementation of d arrays stores the non-zero entries in a balanced search tree with key type string. In the second line we deﬁne a string s. The while-loop does most of the work. We read strings from the standard input

© 2005 by Chapman & Hall/CRC

41-10

Handbook of Data Structures and Applications 1

1

1

0

2

1

2 2

FIGURE 41.3: A shortest path in a graph. Each edge has a non-negative cost. The cost of a path is the sum of the cost of its edges. The source node s is indicated as a square. For each node the length of the shortest path from s is shown. until the end of the input stream is reached. For every string s we increment the entry N [s] of the array N by one. The iteration forall deﬁned(s, N ) in the last line successively assigns all strings to s for which the corresponding entry of N was touched during execution. For each such string, the string and its frequency are printed on the standard output.

41.6.2

Shortest Paths

Dijkstra’s shortest path algorithm [7] takes a directed graph G = (V, E), a node s ∈ V , called the source, and a non-negative cost function on the edges cost : E → R≥0 . It computes for each node v ∈ V the distance from s, see Figure 41.3. A typical text book presentation of the algorithm is as follows: forall nodes v do set dist(v) to inﬁnity. declare v unreached. od set dist(s) to 0. while there is an unreached node do let u be an unreached node with minimal dist-value. declare u reached. forall edges e = (u, v) out of u do set dist(v) = min(dist(v), dist(u) + cost(e)). od od

(*)

The text book presentation will then continue to discuss the implementation of line (*). It will state that the pairs {(v, dist (v)); v unreached} should be stored in a priority queue, e.g., a Fibonacci heap, because this will allow the selection of an unreached node with minimal distance value in logarithmic time. It will probably refer to some other chapter of the book for a discussion of priority queues. We next give the corresponding Leda program; it is very similar to the pseudo-code above. In fact, after some experience with Leda you should be able to turn the pseudo-

© 2005 by Chapman & Hall/CRC

LEDA, a Platform for Combinatorial and Geometric Computing

41-11

code into code within a few minutes. #include #include void DIJKSTRA(const graph& G, node s, const edge_array<double>& cost, node_array<double>& dist) { node_pq<double> PQ(G); node v; dist[s] = 0; forall_nodes(v,G) { if (v != s) dist[v] = MAXDOUBLE; PQ.insert(v,dist[v]); } while (!PQ.empty()) { node u = PQ.del_min(); edge e; forall_out_edges(e,u) { v = target(e); double c = dist[u] + cost[e]; if (c < dist[v]) { PQ.decrease_p(v,c); dist[v] = c; } } } } We start by including the graph and the node priority queue data types. The function DIJKSTRA takes a graph G, a node s, an edge array cost , and a node array dist . Edge arrays and node arrays are arrays indexed by edges and nodes, respectively. We declare a priority queue PQ for the nodes of graph G. It stores pairs (v, dist [v]) and is initially empty. The forall nodes-loop initializes dist and PQ . In the main loop we repeatedly select a pair (u, dist [u]) with minimal distance value and then iterate over all out-going edges to update distance values of neighboring vertices. We next incorporate the shortest path program into a small demo. We generate a random graph with n nodes and m edges and choose the edge costs as random number in the range [0, 100]. We call the function above and report the running time. int main() { int n = read_int("number of nodes = "); int m = read_int("number of edges = "); graph G; random_graph(G,n,m); edge_array<double> cost(G); node_array<double> dist(G); edge e; forall_edges(e,G) cost[e] = rand_int(0,100); float T = used_time(); DIJKSTRA(G,G.first_node(),cost,dist);

© 2005 by Chapman & Hall/CRC

41-12

Handbook of Data Structures and Applications

cout << "The computation took " << used_time(T) << " seconds." << endl; } On a graph with 10000 nodes and 100000 edges the computation takes less than a second.

41.6.3

Curve Reconstruction

The reconstruction of a curve from a set of sample points is an important problem in computer vision. Amenta, Bern, and Eppstein [2] introduced a reconstruction algorithm which they called CRUST. Figure 41.4 shows a point set and the curves reconstructed by their algorithm. The algorithm CRUST takes a list S of points and returns a graph G. CRUST makes use of Delaunay diagrams and Voronoi diagrams and proceeds in three steps: • It ﬁrst constructs the Voronoi diagram VD of the points in S. • It then constructs a set L = S ∪ V , where V is the set of vertices of VD. • Finally, it constructs the Delaunay triangulation DT of L and makes G the graph of all edges of DT that connect points in S. The algorithm is very simple to implement #include #include #include #include void CRUST(const list<point>& S, GRAPH<point,int>& G) { list<point> L = S; GRAPH VD; VORONOI(L,VD); // add Voronoi vertices and mark them map<point,bool> voronoi_vertex(false); node v; forall_nodes(v,VD) { if (VD.outdeg(v) < 2) continue; point p = VD[v].center(); voronoi_vertex[p] = true; L.append(p); } DELAUNAY_TRIANG(L,G); forall_nodes(v,G) if (voronoi_vertex[G[v]]) G.del_node(v); } We give some explanations. We start by including graphs, maps, the ﬂoating point geometry kernel, and the geometry algorithms. In CRUST we ﬁrst make a copy of S in L. Next we compute the Voronoi diagram VD of the points in L. In Leda we represent Voronoi diagrams by graphs whose nodes are labeled with circles. A node v is labeled by a circle passing through the deﬁning sites of the vertex. In particular, VD[v].center ( ) is the position of the node v in the plane. Having computed VD we iterate over all nodes of VD and add all ﬁnite vertices (a Voronoi diagram also has nodes at inﬁnity, they have degree one in our graph representation of Voronoi diagrams) to L. We also mark all added points

© 2005 by Chapman & Hall/CRC

LEDA, a Platform for Combinatorial and Geometric Computing

41-13

FIGURE 41.4: A set of points in the plane and the curve reconstructed by CRUST. The ﬁgure was generated by the program presented in Section 41.6.3. as vertices of the Voronoi diagram. Next we compute the Delaunay triangulation of the extended point set in G. Having computed the Delaunay triangulation, we collect all nodes of G that correspond to vertices of the Voronoi diagram in a list vlist and delete all nodes in vlist from G. The resulting graph is the result of the reconstruction. We next incorporate CRUST into a small demo which illustrates its speed. We generate n random points in the plane and construct their crust. We are aware that it does really make sense to apply CRUST to a random set of points, but the goal of the demo is to illustrate the running time. int main() { int n = read_int("number of points = "); list<point> S; random_points_in_unit_square(n,S); GRAPH<point,int> G; float T = used_time(); CRUST(S,G); cout << "The crust computation took " << used_time(T) << " seconds."; cout << endl; } For 3000 points the computation takes less than a second. We can now use the preceding program for a small interactive demo. #include int main() { window W; W.display(); W.set_node_width(2); W.set_line_width(2); point p; list<point> S; GRAPH<point,int> G;

© 2005 by Chapman & Hall/CRC

41-14

Handbook of Data Structures and Applications

while (W >> p) { S.append(p); CRUST(S,G); W.clear(); node v; forall_nodes(v,G) W.draw_node(G[v]); edge e; forall_edges(e,G) W.draw_segment(G[source(e)], G[target(e)]); } } We give some more explanations. We start by including the window type. In the main program we deﬁne a window and open its display. A window will pop up. We state that we want nodes and edges to be drawn with width two. We deﬁne the list S and the graph G required for CRUST. In each iteration of the while-loop we read a point in W (each click of the left mouse button enters a point), append it to S and compute the crust of S in G. We then draw G by drawing its vertices and its edges. Each edge is drawn as a line segment connecting its endpoints. Figure 41.4 was generated with the program above.

41.6.4

Upper Convex Hull

In the next example we show how to use Leda for computing the upper convex hull of a given set of points. The following function UPPER HULL takes a list L of rational points (type rat point) as input and returns the list of points of the upper convex hull of L in clockwise ordering. The algorithm is a variant of Graham’s Scan [25]. First we sort L according to the lexicographic ordering of the Cartesian coordinates and remove multiple points. If the list contains not more than two points after this step we stop. Before starting the actual Graham Scan we ﬁrst skip all initial points lying on or below the line connecting the two extreme points. Then we scan the remaining points from left to right and maintain the upper hull of all points seen so far in a list called hull. Note however that the last point of the hull is not stored in this list but in a separate variable p. This makes it easier to access the last two hull points as required by the algorithm. Note also that we use the rightmost point as a sentinel avoiding the special case that hull becomes empty. using namespace leda; list UPPER_HULL(list L) { L.sort(); L.unique(); if (L.length() <= 2) return L; rat_point p_min = L.front(); // leftmost point rat_point p_max = L.back(); // rightmost point list hull; hull.append(p_max); // use rightmost point as sentinel hull.append(p_min); // first hull point // goto first point p above (p_min,p_max) while (!L.empty() && !left_turn(p_min,p_max,L.front()) L.pop(); if (L.empty()) return hull;

© 2005 by Chapman & Hall/CRC

LEDA, a Platform for Combinatorial and Geometric Computing

41-15

rat_point p = L.pop(); // second (potential) hull point rat_point q; forall(q,L) { while (!right_turn(hull.back(),p,q)) p = hull.pop_back(); hull.append(p); p = q; } hull.append(p); // add last hull point hull.pop(); // remove sentinel return hull; }

41.6.5

Delaunay Flipping

Leda represents triangulations by bidirected plane graphs (from the graph library) whose nodes are labeled with points and whose edges may carry additional information, e.g. integer ﬂags indicating the type of edge (hull edge, triangulation edge, etc.). All edges incident to a node v are ordered in counter-clockwise ordering and every edge has a reversal edge. In this way the faces of the graph represent the triangles of the triangulation. The graph type oﬀers methods for iterating over the nodes, edges, and adjacency lists of the graph. In the case of plane graphs there are also operations for retrieving the reverse edge and for iterating over the edges of a face. Furthermore, edges can be moved to new nodes. This graph operation is used in the following program to implement edge ﬂips. Function DELAUNAY FLIPPING takes as input an arbitrary triangulation and turns into a Delaunay triangulation by the well-known ﬂipping algorithm. This algorithm performs a sequence of local transformations as shown in Figure 41.5 to establish the Delaunay property: for every triangle the circumscribing sphere does not contain any vertex of the triangulation in its interior. The test whether an edge has to be ﬂipped or not can be realized by a so-called side of circle test. This test takes four points a, b, c, d and decides on which side of the oriented circle through the ﬁrst three points a,b, and c the last point d lies. The result is positive or negative if d lies on the left or on the right side of the circle, respectively, and the result is zero if all four points lie on one common circle. The algorithms uses a list of candidates which might have to be ﬂipped (initially all edges). After a ﬂip the four edges of the corresponding quadrilateral are pushed onto this candidate list. Note that G[v] returns the position of node v in the triangulation graph G. A detailed description of the algorithm and its implementation can be found in the Leda book ([27]). void DELAUNAY_FLIPPING(GRAPH& G) { list<edge> S = G.all_edges(); while ( !S.empty() ) { edge e = S.pop(); edge r = G.rev_edge(e); // e1,e2,e3,e4: edges of quadrilateral with diagonal e edge e1 = G.face_cycle_succ(r); edge e2 = G.face_cycle_succ(e1);

© 2005 by Chapman & Hall/CRC

41-16

Handbook of Data Structures and Applications

c

c

ﬂip(a,c) d

b

d

b

a

a

FIGURE 41.5: Delaunay Flipping edge e3 = G.face_cycle_succ(e); edge e4 = G.face_cycle_succ(e3); // a,b,c,d: corners of quadrilateral POINT a = G[G.source(e1)]; POINT b = G[G.target(e1)]; POINT c = G[G.source(e3)]; POINT d = G[G.target(e3)]; if (side_of_circle(a,b,c,d) > 0) { S.push(e1); S.push(e2); S.push(e3); S.push(e4); // flip diagonal G.move_edge(e,e2,source(e4)); G.move_edge(r,e4,source(e2)); } } }

41.6.6

Discussion

In each of the above examples only a few lines of code were necessary to achieve complex functionality and, moreover, the code is elegant and readable. The data structures and algorithms in Leda are eﬃcient. For example, the computation of shortest paths in a graph with 10000 nodes and 100000 edges and the computation of the crust of 5000 points takes less than a second each. We conclude that Leda is ideally suited for rapid prototyping as summarized in the equation

Algorithm + Leda = Eﬃcient Program.

© 2005 by Chapman & Hall/CRC

LEDA, a Platform for Combinatorial and Geometric Computing

41.7

41-17

Projects Enabled by LEDA

A large number academic and industrial projects from almost every area of combinatorial and geometric computing have been enabled by Leda. Examples are graph drawing, algorithm visualization, geographic information systems, location problems, visibility algorithms, DNA sequencing, dynamic graph algorithms, map labeling, covering problems, railway optimization, route planning and many more. A detailed list of academic Leda projects can be found on and a selection of industrial projects is shown on .

References [1] A. V. Aho, J. E. Hopcroft and J. D. Ullman, The Design and Analysis of Computer Algorithms, Addison-Wesley,1974. [2] N. Amenta, M. Bern and D. Eppstein, The Crust and the beta-Skeleton: Combinatorial Curve Reconstruction, Graphical Models and Image Processing, Vol. 60, 125–135, 1998. [3] M. Blum, M. Luby and R. Rubinfeld, Self-testing/correcting with applications to numerical problems, Proceedings of the 22nd Annual ACM Symposium on Theory of Computing (STOC90), 73–83, 1990. [4] M. Blum and S. Kannan, Designing Programs That Check Their Work, Proceedings of the 21th Annual ACM Symposium on Theory of Computing (STOC89), 86–97, 1989. [5] C. Burnikel, K. Mehlhorn and S. Schirra, How to compute the Voronoi diagram of line Segments: Theoretical and experimental results, Proceedings of the 2nd Annual European Symposium on Algorithms (ESA94), Lecture Notes in Computer Science 855, 227–239, 1994. [6] T. H. Cormen and C. E. Leiserson and R. L. Rivest, Introduction to Algorithms, MIT Press/McGraw-Hill Book Company, 1990. [7] E. W. Dijkstra, A Note on Two Problems in Connection With Graphs, Num. Math., Vol. 1, 269–271, 1959. [8] C. Hundack, K. Mehlhorn and S. N¨ aher, A simple linear time algorithm for identifying Kuratowski subgraphs of non-planar graphs, unpublished manuscript, 1996. [9] J. H. Kingston, Algorithms and Data Structures, Addison-Wesley, 1990. [10] K. Mehlhorn, Data Structures and Algorithms 1,2, and 3, Springer, 1984. [11] K. Mehlhorn, S. N¨ aher, M. Seel and C. Uhrig, The LEDA User Manual, Technical Report, Max-Planck-Institut f¨ ur Informatik, 1999. [12] K. Mehlhorn and S. N¨ aher, The implementation of geometric algorithms, Proceedings of the 13th IFIP World Computer Congress, 223–231, Elsevier Science B.V. NorthHolland, Amsterdam, 1994. [13] K. Mehlhorn and S. N¨ aher, Implementation of a sweep line algorithm for the straight line segment intersection problem, Technical Report, Max-Planck-Institut f¨ ur Informatik, MPI-I-94-160, 1994. [14] K. Mehlhorn and P. Mutzel, On the Embedding Phase of the Hopcroft and Tarjan Planarity Testing Algorithm, Algorithmica, Vol. 16, No. 2, 233–242, 1995. [15] J. Nievergelt and K.H. Hinrichs, Algorithms and Data Structures, Prentice Hall, 1993. [16] J. O’Rourke, Computational Geometry in C, Cambridge University Press, 1994. [17] R. Sedgewick, Algorithms, Addison-Wesley, 1991. [18] M. Seel, Eine Implementierung abstrakter Voronoidiagramme, Diplomarbeit, Fachbereich Informatik, Universit¨ at des Saarlandes, Saarbr¨ ucken, 1994.

© 2005 by Chapman & Hall/CRC

41-18

Handbook of Data Structures and Applications

[19] R. E. Tarjan, Data Structures and Network Algorithms, CBMS-NSF Regional Conference Series in Applied Mathematics 44, 1983. [20] C. J. van Wyk, Data Structures and C Programs, Addison-Wesley, 1988. [21] D. Wood, Data Structures, Algorithms, and Performance, Addison-Wesley, 1993. [22] C. Burnikel, K. Mehlhorn and S. Schirra, On degeneracy in geometric computations, Proc. 5th ACM-SIAM Sympos. Discrete Algorithms, 16–23, 1994. [23] M. B¨ asken and S. N¨ aher, GeoWin - A Generic Tool for Interactive Visualization of Geometric Algorithms, Software Visualization, LNCS 2269, 88–100, 2002. [24] A. Fabri, G.-J. Giezeman, L. Kettner, S. Schirra and S. Sch¨onherr, On the Design of CGAL a Computational Geometry Algorithms Library, Software – Practice and Experience, Vol. 30, No. 11, 1167–1202, 2000. [25] R. L. Graham, An eﬃcient algorithm for determining the convex hulls of a ﬁnite point set, Information Processing Letters, Vol. 1, 132–133, 1972. [26] K. Mehlhorn, M. M¨ uller, S. N¨ aher, S. Schirra, M. Seel, C. Uhrig and J. Ziegler, A

Computational Basis for Higher-Dimensional Computational Geometry and Applications, Comput. Geom. Theory Appl., Vol. 10, No. 4, 289–303, 1998. [27] K. Mehlhorn and S. N¨ aher, LEDA: A Platform for Combinatorial and Geometric Computing, Cambridge University Press, 2000. [28] K. Mehlhorn, S. N¨ aher, M. Seel, R. Seidel, T. Schilz, S. Schirra and C. Uhrig, Checking Geometric Programs or Veriﬁcation of Geometric Structures, Comput. Geom. Theory Appl., Vol. 12, No. 1–2, 85–103, 1999.

© 2005 by Chapman & Hall/CRC

42 Data Structures in C++ 42.1 42.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic Containers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42-1 42-1

Sequence Containers • Sorted Associative Containers • Container Adapters

42.3

Iterators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basics

42.4

42.1

42.5

42-8

Reverse Iterators

Additional Components of the STL . . . . . . . . . . . . . 42-10 Sorting, Searching, and Selection Extensions

Mark Allen Weiss Florida International University

•

•

Non-Standard

Sample Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-13

Introduction

In C++, several classic data structures are implemented as a part of the standard library, commonly known as the Standard Template Library. The Standard Template Library (or simply, the STL) consists of a set of container classes (such as lists, sets, and maps), iterator classes that are used to traverse the container classes, and generic algorithms, such as sorting and searching. As its name implies, the library consists of (both function and class) templates. The STL is very powerful, and makes some use of advanced C++ features. Our discussion is focused on the most basic uses of the STL. We partition our discussion of the Standard Template Library into the following sections. 1. Containers. 2. Iterators. 3. Generic Algorithms. See [3–9] for additional material on the Standard Template Library.

42.2

Basic Containers

The STL deﬁnes several container templates that store collections of objects. Some collections are unordered, while others are ordered. Some collections allow duplicates, while others do not. All containers support the following operations: • int size( ) const: returns the number of elements in the container. • void clear( ): removes all elements from the container. 42-1

© 2005 by Chapman & Hall/CRC

42-2

Handbook of Data Structures and Applications

• bool empty( ) const: returns true if the container contains no elements and false otherwise. There is no universal add or insert member function; diﬀerent containers use diﬀerent names. The container classes can be split into three broad categories: 1. Sequence containers: maintains items with a notion of a position in the collection. Examples include vector, list, and deque. 2. Sorted associative containers: maintains items in sorted order. Examples include set, multiset, map, and multimap. 3. Container adapters: built on top of other containers to yield classic data structures. Examples include stack, queue, and priority queue. Associated with all containers is an iterator. An iterator represents the notion of a position in the container and is used to step through the container. All containers support the following operations: • iterator begin( ): returns an appropriate iterator representing the ﬁrst item in the container. • iterator end( ): returns an appropriate iterator representing the end marker in the container (i.e. the position after the last item in the container). We defer the discussion of iterators to Section 42.3.

42.2.1

Sequence Containers

The three basic sequence containers in the STL are the vector, list, and deque. vector is a growable array. The vector wraps an internal array, maintaining a notion of its size, and internally its current capacity. If a sequence of additions would cause the size to exceed capacity, the capacity is automatically doubled. This makes additions at the end of the vector take constant amortized time. list is a doubly-linked list, in which pointers to both ends are maintained. deque is, in eﬀect, a growable array that grows at both ends. There are several well-known ways of implement deque eﬃciently, but the standard is silent on which must be used. For vector, an insertion or deletion takes amortized time that is proportional to the distance from the back, while for a deque, these operations take amortized time that is proportional to the smaller of the distances from the front and back. For a list, these operations take worst-case time that is proportional to the smaller of the distances from the front and back if an index is speciﬁed, but constant worst-case time if the position is speciﬁed by an existing iterator. vector and deque support indexing in constant worst-case time; list does not. The basic operations that are supported by both containers are: • void push back( const Object & x ): adds x to the end of the container. • Object & back( ): returns the object at the end of the container (an accessor that returns a constant reference is also provided). • void pop back( ): removes the object at the end of the container. • Object & front( ): returns the object at the front of the container (an accessor that returns a constant reference is also provided). • iterator insert( iterator pos, const Object & x ): adds x into the container, prior to the position given by the iterator pos. This is a constant-time

© 2005 by Chapman & Hall/CRC

Data Structures in C++

42-3

operation for list, but not for vector or deque. The return value is an iterator representing the position of the inserted item. • iterator erase( iterator pos ): removes the object at the position given by the iterator. This is a constant-time operation for list, but not vector or deque. The return value is the position of the element that followed pos prior to the call. This operation invalidates pos, which is now stale. • iterator erase( iterator start, iterator end ): removes all items beginning at position start, up to but not including end. Observe that an entire container can be erased by the call: c.erase( c.begin( ), c.end( ) ). For deque and list, two additional operations are available with expected semantics: • void push front( const Object & x ): adds x to the front of the container. • void pop front( ): removes the object at the front of the container. The list also provides a splice operation that allows the transfer of a sublist to somewhere else. • void splice( iterator pos, list & l, iterator start, iterator end ): moves all items beginning at position start, up to but not including end to after pos. The moved items are assumed to have come from list l. The running time of this operation is proportional to the number of items moved, unless the items are moved within the same list (i.e. &l==this), in which case the running time is constant-time. For vector and deque, additional operations include • Object & operator[] ( int idx ) returns the object at index idx in the container, with no bounds-checking (an accessor that returns a constant reference is also provided). • Object & at( int idx ): returns the object at index idx in the container, with bounds-checking (an accessor that returns a constant reference is also provided). • int capacity( ) const: returns the internal capacity. • void reserve( int newCapacity ): for vector only, sets the new capacity. If a good estimate is available, it can be used to avoid array expansion.

42.2.2

Sorted Associative Containers

The STL provides two basic types of associative containers. Sets are used to store items. The multiset allows duplicates, while the set does not. Maps are used to store key/value pairs. The multimap allows duplicate keys, while the map does not. For sets, the items are logically maintained in sorted order, so an iterator to the “beginning item” represents the smallest item in the collection. For maps, the keys are logically maintained in sorted order. As a result, the most natural implementation of sets and maps make use of balanced binary search trees; typically a top-down red black tree (Chapter 10) is used. The signiﬁcant liability is that basic operations take logarithmic worst-case time. Some STL implementations (such as SGI’s version) provide hash set and hash map, which make use of hash tables (Chapter 9) and provide constant average time per basic operation. A hash container will eventually make its way into the library, but at the time of this writing it is not Standard C++. C++ sets and maps use either a default ordering (operator<) or one provided by a function object. In C++ a function object is implemented by providing a class that contains

© 2005 by Chapman & Hall/CRC

42-4

Handbook of Data Structures and Applications

an overloaded operator(), and then instantiating a template with the class name as a template parameter (an example of this is shown later in Figure 42.1). Both sets and maps make use of the pair class template. The pair class template, stores two data members first and second, which can be directly accessed, without invoking member functions. Internally, maps store items of type pair. Additionally, several set member functions need to return two things; this is done by returning an appropriately instantiated pair. Sets and Multisets

The set provides several member functions in addition to the usual suspects, including: • pair insert( const Object & x ): adds x to the set. If x is not already present, the returned pair will contain the iterator representing the already contained x, and false. Otherwise, it will contain the iterator representing the newly inserted x, and true. • pair insert( iterator hint, const Object & x ): same behavior as the one-parameter insert, but allows speciﬁcation of a hint, representing the position where x should go. If the underlying implementation is a ﬁnger search tree (Chapter 11), or equivalent, the performance could be better than using the one-parameter insert. • iterator find( const Object & x ) const: returns an iterator representing the position of x in the set. If x is not found, the endmarker is returned. • int erase( const Object & x ): removes x (if present) and returns the number of items removed, which is either 0 or 1 in a set, and perhaps larger in a multiset. • iterator erase( iterator pos ): same behavior as the sequence container version. • iterator erase( iterator start, iterator end ): same behavior as the sequence container version. • iterator lower bound( const Object & x ): returns an iterator to the ﬁrst element in the set with a key that is greater than or equal to x. • iterator upper bound( const Object & x ): returns an iterator to the ﬁrst element in the set with a key that is greater than x. • pair equal range( const Object & x ): returns a pair of iterators representing lower bound and upper bound. A multiset is like a set except that duplicates are allowed. The return type of insert is modiﬁed to indicate that the insert always succeeds: • iterator insert( const Object & x ): adds x to the multiset; returns an iterator representing the newly inserted x. • iterator insert( iterator hint, const Object & x ): adds x to the multiset; returns an iterator representing the newly inserted x. Performance might be enhanced if x is inserted close to the position given by hint. For the multiset, the erase member function that takes an Object x removes all occurrences of x. To simply remove one occurrence, ﬁrst call find to obtain an iterator, and then use the erase member function that takes an iterator. In a multiset, to ﬁnd all occurrences of x, we cannot simply call find; that returns an iterator referencing one occurrence (if there is one), but which speciﬁc occurrence is

© 2005 by Chapman & Hall/CRC

Data Structures in C++

42-5

#include <set> #include <string> #include using namespace std; class CaseInsensitive { public: bool operator() ( const string & lhs, const string & rhs ) const { return stricmp( lhs.c_str( ), rhs.c_str( ) ) > 0; } }; int main( ) { set<string> s1; set<string,CaseInsensitive> s2; s1.insert( s1.insert( s1.insert( s2.insert( s2.insert( s2.insert(

"hello" "world" "HELLO" "hello" "world" "HELLO"

); ); ); ); ); );

cout << s1.size( ) << " " << s2.size( ) << endl; cout << (s1.find( "HeLlO" ) == s1.end( )) << endl; cout << (s2.find( "HeLlO" ) == s2.end( )) << endl;

// prints 3 2 // returns true // returns false

return 0; } FIGURE 42.1: Using the set class template. returned is not guaranteed. Instead, the range returned by lower bound and upper bound (with upper bound not included) contains all of occurrences of x; typically this is obtained by a call to equal range. Figure 42.1 illustrates two sets: s1 which stores strings using the normal case-sensitive ordering, and s2 which stores strings using case-insensitive comparisons. s2 is instantiated by providing the class of a function object as a template parameter. As a result, s1 contains three strings, but s2 considers "hello" and "HELLO" to be identical, and thus only stores one of them. Maps and Multimaps

A map behaves like a set instantiated with a pair representing a key and value, with a comparison function that refers only to the key. Thus it supports all of the set operations. The find operation for maps requires only a key, but the iterator that it returns references a pair. Similarly, erase requires only a key, and otherwise behaves like the set’s erase. insert is supported, but to use insert, we must insert a properly instantiated pair, which is cumbersome, and thus rarely done. Instead, the map overloads the array indexing

© 2005 by Chapman & Hall/CRC

42-6

Handbook of Data Structures and Applications

operator[]: • ValueType & operator[] ( const KeyType & key ): if the key is present in the map, a reference to the value is returned. If the key is not present in the map, it is inserted with a default value into the map, and then a reference to the inserted default value is returned. The default value is obtained by applying a zero-parameter constructor, or is zero for the primitive types. The semantics of operator[] do not allow an accessor version of operator[], and so operator[] cannot be used on an immutable map. For instance, if a map is passed by constant reference, inside the routine, operator[] is unusable. In such a case, we can use #include <map> #include <string> #include using namespace std; void addAlias( map<string,vector<string> > & aliasMap, const string & name, const string & alias ) { aliasMap[ name ].push_back( alias ); } const vector<string> & getAliases( map<string,vector<string> > & aliasMap, const string & name ) { return aliasMap[ name ]; } int main( ) { map<string,vector<string> > aliasMap; addAlias( addAlias( addAlias( addAlias(

aliasMap, aliasMap, aliasMap, aliasMap,

"john", "[email protected]" ); "authors", "[email protected]" ); "authors", "[email protected]" ); "authors", "[email protected]" );

cout << "authors is aliased to: "; const vector<string> & authors = getAliases( aliasMap, "authors" ); for( int i = 0; i < authors.size( ); i++ ) cout << authors[ i ] << " "; cout << endl; return 0; } FIGURE 42.2: Using the map class template.

© 2005 by Chapman & Hall/CRC

Data Structures in C++

42-7

find to obtain an iterator, test if the iterator represents the endmarker (in which case the find has failed), and if the iterator is valid, we can use it to access the pair’s second component, which is the value. (This alternate idiom is eventually seen in the larger example in Section 42.5). A multimap is a map in which duplicate keys are allowed. multimaps behave like maps but do not support operator[]. Figure 42.2 illustrates a combination of map and vector in which the keys are email aliases, and the values are the email addresses corresponding to each alias. Since there can be several addresses for each alias, the values are themselves vectors of strings. The trickiest part (other than the various parameter-passing modes) concerns the one-line implementation of addAlias. There, we see that aliasMap[name] refers to the vector value in the map for the name key. If name is not in the map, then the call to operator[] causes it to be placed into the map, with a default value being a zero-sized vector. Thus whether or not name was in the map prior to calling addAlias, after the access of the map, the call to push back updates the vector value correctly.

42.2.3

Container Adapters

The STL provides adapter class templates to implement stacks, queues, and priority queues. These class templates are instantiated with the type of object to be stored and (optionally, if the default is unacceptable) the container class (such as vector, list, or deque) that is used to store the objects. Thus we can specify a linked list or array implementation for a stack, though in reality, this feature does little more than add nicer names than push back to the (existing list or vector, respectively) interface. stack and queue For stack, the member functions are push, pop, and top. For queue, we get push, front, and pop. By default, a vector is used for stack and a deque for queue. Figure 42.3 shows how to use the queue adapter, implemented with a doubly-linked list. #include #include #include <list> using namespace std; int main( ) { queue > q; q.push( 3 ); q.push( 7 ); for( ; !q.empty( ); q.pop( ) ) cout << q.front( ) << endl; return 0; } FIGURE 42.3: Using the queue adapter.

© 2005 by Chapman & Hall/CRC

42-8

Handbook of Data Structures and Applications

priority queue The priority queue template contains member functions named push, top, and pop, that mirror insert, findmax, and deletemax in a classic max-heap. Sometimes priority queues are set up to remove and access the smallest item instead of the largest item. In such a case, the priority queue can be instantiated with an appropriate greater function object to override the default ordering. The priority queue template is instantiated with an item type, the container type (as in stack and queue), and the comparator, with defaults allowed for the last two parameters. In Figure 42.4, the default instantiation of priority queue allows access to the largest items, whereas an instantiation with a greater function object reverses the comparison order and allows access to the smallest item.

42.3

Iterators

The iterator in C++ abstracts the notion of a position in the container. As we have already seen, there are several ways to obtain such a position. All containers provide begin and end member functions that return iterators representing the ﬁrst item and endmarker, respectively. Many containers provide a searching member function (e.g. set::find) that returns an iterator viewing the found item, or the endmarker if the item is not found.

42.3.1

Basics

Throughout our discussion we have used iterator as a type. In reality, in C++, each container deﬁnes several iterator types, nested in the scope of the container, and these speciﬁc iterator types are used by the programmer instead of simply using the word iterator. For instance, if we have a vector, the basic iterator type is vector::iterator. The basic iterator can be used to traverse and change the contents of the container. Another iterator type, vector::const iterator, does not allow changes to the container on which the iterator is operating. All iterators are guaranteed to have at least the following set of operations: • ++itr and itr++: advance the iterator itr to the next location. Both the preﬁx and postﬁx forms are available. This does not cause any change to the container. • *itr: returns a reference to the container object that itr is currently representing. The reference that is returned is modiﬁable for basic iterators, but is not modiﬁable (i.e. a constant reference) for const iterators. • itr1==itr2: returns true if iterators itr1 and itr2 refer to the same position in the same container and false otherwise. • itr1!=itr2: returns true if iterators itr1 and itr2 refer to diﬀerent positions or diﬀerent containers and false otherwise. Some iterators eﬃciently support --itr and itr--. Those iterators are called bidirectional iterators. All of the iterators for the common containers vector, list, deque, set, and map are bidirectional. Some iterators eﬃciently support both itr+=k and itr+k. Those iterators are called random-access iterators. itr+=k advances the iterator k positions. itr+k returns a new iterator that is k positions ahead of itr. Also supported by random-access iterators are itr-=k and itr-k, with obvious semantics, and itr1-itr2 which yields a separation distance as an integer. The iterators for vector and deque support random access.

© 2005 by Chapman & Hall/CRC

Data Structures in C++

42-9

#include #include #include #include <string> #include using namespace std; // Empty the priority queue template void dumpPQ( const string & { if( pq.empty( ) ) cout << msg << " is else { cout << msg << ": " pq.pop( ); while( !pq.empty( ) { cout << " " << pq.pop( ); } cout << endl; } }

and print its contents. msg, PQueue & pq )

empty" << endl;

<< pq.top( ); ) pq.top( );

int main( ) { priority_queue maxpq; priority_queue,greater > minpq; minpq.push( 3 ); minpq.push( 7 ); minpq.push( 3 ); maxpq.push( 3 ); maxpq.push( 7 ); maxpq.push( 3 ); dumpPQ( "minpq", minpq ); dumpPQ( "maxpq", maxpq );

// minpq: 3 3 7 // maxpq: 7 3 3

return 0; }

FIGURE 42.4: Using the priority queue adapter. All C++ containers have two member functions, begin and end that return iterators. Each collection deﬁnes four member functions: • iterator begin( ) • const iterator begin( ) const • iterator end( )

© 2005 by Chapman & Hall/CRC

42-10

Handbook of Data Structures and Applications

• const iterator end( ) const begin returns an iterator that is positioned at the ﬁrst item in the container. end returns an iterator that is positioned at the endmarker, which represents a position one past the last element in the container. On an empty container, begin and end return the same position. For random access iterators, the result of subtracting the return values of end and begin is always the size of the container. Typically we initialize a local iterator to be a copy of the begin iterator, and have it step through the container, stopping as soon as it hits the endmarker. As an example, Figure 42.5 shows a print function that prints the elements of any container, provided that the elements in the container have provided an operator<<. Note that we must use a const iterator to traverse the container, because the container is itself immutable in the scope of print. The test program illustrates ﬁve diﬀerent containers that invoke the print function, along with the expected output (in comments). Observe that both set and multiset output in sorted order, with multiset allowing the second insertion of beta. Additionally, for map to be compatible with the print routine, we must provide an operator<< that works for the elements of the map, namely the appropriate pairs.

42.3.2

Reverse Iterators

Sometimes it is important to be able to traverse a container in the reverse direction. Because of the asymmetric nature of begin and end (representing the ﬁrst element and the endmarker, rather than the last element, respectively) this is cumbersome to do, even for bidirectional iterators. As a result, containers that support bidirectional iterators typically also provide a reverse iterator. The reverse iterator comes in two ﬂavors: reverse iterator and const reverse iterator. For reverse iterators, ++ retreats one position toward the beginning, while -- advances one position toward the end. Container member functions rbegin and rend are used to obtain iterators representing the last element and the beginmarker, respectively. As a result, the code in Figure 42.6 prints any container in reverse order.

42.4 42.4.1

Additional Components of the STL Sorting, Searching, and Selection

The Standard Library includes a rich set of functions that can be applied to the standard containers. Some of the algorithms include routines for sorting, searching, copying (possibly with substitutions), shuﬄing, reversing, rotating, merging, and so on. In all there are over sixty generic algorithms. In this section we highlight those related to eﬃcient sorting, selection, and binary search. Sorting

Sorting in C++ is accomplished by use of function template sort. The parameters to sort represent the start and endmarker of a (half-open range in a) container, and an optional comparator: • void sort( iterator begin, iterator end ) • void sort( iterator begin, iterator end, Comparator cmp ) The iterators must support random access. As an example, in

© 2005 by Chapman & Hall/CRC

Data Structures in C++

42-11

#include #include #include <list> #include <set> #include <string> #include <map> using namespace std; template void print( const Container & c, ostream & out = cout ) { typename Container::const_iterator itr; for( itr = c.begin( ); itr != c.end( ); ++itr ) out << *itr << " "; out << endl; } template ostream & operator<<( ostream & out, const pair & p ) { return out << "[" << p.first << "," << p.second << "]"; } int main( ) { vector vec; vec.push_back( 3 ); vec.push_back( 7 ); list<double> lst; lst.push_back( 3.14 ); lst.push_front( 6.28 ); set<string> s; s.insert( "beta" ); s.insert( "alpha" ); s.insert( "beta" ); multiset<string> ms; ms.insert( "beta" ); ms.insert( "alpha" ); ms.insert( "beta" ); map<string,string> zip; zip.insert( pair<string,string>( "Miami", "33199" ) ); zip.insert( pair<string,string>( "Gainesville", "32611" ) ); zip[ "Golden" ] = "80401"; print( print( print( print( print(

vec ); lst ); s ); ms ); zip );

// // // // //

3 7 6.28 3.14 alpha beta alpha beta beta [Gainesville,32611] [Golden,80401] [Miami,33199]

return 0; }

FIGURE 42.5: Generic printing routine that works with ﬁve diﬀerent containers. © 2005 by Chapman & Hall/CRC

42-12

Handbook of Data Structures and Applications

#include using namespace std; template void printReverse( const Container & c, ostream & out = cout ) { typename Container::const_reverse_iterator itr; for( itr= c.rbegin( ); itr != c.rend( ); ++itr ) out << *itr << " "; out << endl; }

FIGURE 42.6: Printing a container in reverse. sort( v.begin( ), v.end( ) ); sort( v.begin( ), v.end( ), greater( ) ); sort( v.begin( ), v.begin( ) + ( v.size ( ) >= 5 ? 5 : 0 ) ); the ﬁrst call sorts the entire container, v, in non-decreasing order. The second call sorts the entire container in non-increasing order. The third call sorts the ﬁrst ﬁve elements of the container in non-decreasing order. The sorting algorithm is generally quicksort, which yields an O(N log N ) algorithm on average. However, O(N log N ) worst-case performance is not guaranteed. The C++ library inherits the sorting routine qsort from C. qsort uses pointers to functions to perform its comparison making it signiﬁcantly slower on average than the sort routine. Furthermore, many implementations use a version of quicksort that has been shown to provide quadratic behavior on some commonly occurring inputs [1]. Avoid using qsort. Selection

The function template nth element is used for selection, and as expected has O(N ) averagecase running time. The parameters include a pair of iterators, and k: • void nth element( iterator begin, int k, iterator end ) • void nth element( iterator begin, int k, iterator end, Comparator c) As a result of calling nth element, the item in the kth position is the kth smallest element, where counting as usual in C++ begins at 0. Thus, in nth_element( v.begin( ), 0, v.end( ) ); nth_element( v.begin( ), 0, v.end( ), greater( ) ); nth_element( v.begin( ), v.begin( ) + ( v.end( ) - vbegin( ) / 2 ), v.end( ) ); the ﬁrst call places the smallest element in the position given by v.begin( ), the second call places the largest element in that position, and the third call places the median in the middle position. Searching

Several generic searching algorithms are available for containers. The most basic is:

© 2005 by Chapman & Hall/CRC

Data Structures in C++

42-13

• iterator find( iterator begin, iterator end, const Object & x ): returns an iterator representing the ﬁrst occurrence of x in the half-open range speciﬁed by begin and end, or end if x is not found. find is simply a sequential search. If the range is sorted, binary search can be used to ﬁnd an object in logarithmic time. A comparator can be provided, or the default ordering can be used. The signatures for binary search are: • iterator binary search( iterator begin, iterator end, const Object & x ) • iterator binary search( iterator begin, iterator end, const Object & x, Comparator cmp ) equal range, lower bound, and upper bound search sorted ranges and behave with the same semantics as the identically named member functions in set.

42.4.2

Non-Standard Extensions

Some implementations of the STL contain additional classes. Eventually, these might become part of C++. A rope is a container that behaves like a string but is optimized for large strings. The implementation of a rope (the name is a play on long string) makes use of trees of referencecounted substrings, and allows operations such as assignment, concatenation, and substring to be performed more eﬃciently than with a regular string. A slist is a singly-linked list. Because in a standard list, insert and erase add and remove prior to the position given in the iterator, those operations are linear-time in an slist in some implementations. If so, you’ll ﬁnd additional member functions insert after and erase after that provide constant-time performance. The hash set, hash map, hash multiset, and hash multimap containers support sets and maps at O(1) average time per operation, using hash tables. Generally speaking, these are instantiated with a type of object being stored, a comparison function (that defaults to ==), and a hash function. Unfortunately, there are several competing designs which are not compatible with each other, and it remains to be seen which design will eventually be chosen to join the Standard Library.

42.5

Sample Code

To illustrate some of the STL routines in one place, we provide an implementation of a routine that ﬁnds word ladders. A word ladder transforms one word to another by changing one character at a time, with each change always resulting in a real word. For instance, we transform those to where using the word ladder: those, these, there, where. See [2] for a description of this problem. The word ladder problem is a standard unweighted shortest path problem, and in the typical application of ﬁve-letter words, a quadratic algorithm is acceptable. Figures 42.7 to 42.9 show some of the routines (omitting error checks, function prototypes, and a main that reads the word list and prompt for word pairs), which for the most part are straightforward. computeAdjacentWords, shown in Figure 42.7, uses the same idiom seen in Figure 42.2 (dealing with email aliases). In Figure 42.8 we see two versions of findChain. The return value for findChain is a map in which the key is a word, and the value is an adjacent word on the chain back towards

© 2005 by Chapman & Hall/CRC

42-14

Handbook of Data Structures and Applications

#include #include <map> #include <string> #include #include using namespace std; // Returns true if word1 and word2 are same length // and differ in only one character. bool oneCharOff( const string & word1, const string & word2 ) { if( word1.length( ) != word2.length( ) ) return false; int diffs = 0; for( int i = 0; i < word1.length( ); i++ ) if( word1[ i ] != word2[ i ] ) if( ++diffs > 1 ) return false; return diffs == 1; } // Computes a map in which the keys are words and values are vectors of words // that differ in only one character from the corresponding key. map<string,vector<string> > computeAdjacentWords( const vector<string> & words ) { map<string,vector<string> > adjacentWords; for( int i = 0; i < words.size( ); i++ ) for( int j = i+1; j < words.size( ); j++ ) if( oneCharOff( words[ i ], words[ j ] ) ) { adjacentWords[ words[ i ] ].push_back( words[ j ] ); adjacentWords[ words[ j ] ].push_back( words[ i ] ); } return adjacentWords; }

FIGURE 42.7: Word ladders (O(N 2 ), and with main omitted (part 1 of 3)). the ﬁrst word (or "" if there is no chain, or if the key is first). The shorter version of findChain takes a vector containing the words, computes the map of adjacent words, and then invokes the longer version of findChain. Because the map in findChain is passed by constant reference, operator[] is not available, and instead we access values in the map by using the iterator returned by a call to find.

© 2005 by Chapman & Hall/CRC

Data Structures in C++

42-15

// Runs the shortest path calculation from the original set of words, returning // a vector that contains the sequence of word changes to get from first to // second. Since this calls computeAdjacentWords, it is recommended that the // user instead call computeAdjacents once and then the other findChain below // for each word pair. vector<string> findChain( const vector<string> & words, const string & first, const string & second ) { map<string,vector<string> > adjacentWords = computeAdjacentWords( words ); return findChain( adjacentWords, first, second ); } // Runs the shortest path calculation from the adjacency map, returning a vector // that contains the sequence of word changes to get from first to second. vector<string> findChain( const map<string,vector<string> > & adjacentWords, const string & first, const string & second ) { map<string,string> previousWord; queue<string> q; q.push( first ); while( !q.empty( ) ) { string current = q.front( ); q.pop( ); map<string,vector<string> >::const_iterator itr; itr = adjacentWords.find( current ); if( itr != adjacentWords.end( ) ) { const vector<string> & adj = itr->second; for( int i = 0; i < adj.size( ); i++ ) if( previousWord[ adj[ i ] ] == "" ) { previousWord[ adj[ i ] ] = current; q.push( adj[ i ] ); } } } return getChainFromPreviousMap( previousWord, first, second ); } FIGURE 42.8: Word ladders (O(N 2 ), and with main omitted (part 2 of 3)).

© 2005 by Chapman & Hall/CRC

42-16

Handbook of Data Structures and Applications

// After the shortest path calculation has run, computes the vector that // contains the sequence of word changes to get from first to second. vector<string> getChainFromPreviousMap( map<string,string> & previousWord, const string & first, const string & second ) { vector<string> result; if( previousWord[ second ] != "" ) { string current = second; while( current != first ) { result.push_back( current ); current = previousWord[ current ]; } result.push_back( first ); } reverse( result.begin( ), result.end( ) ); return result; } FIGURE 42.9: Word ladders (O(N 2 ), and with main omitted (part 3 of 3)). Finally, in Figure 42.9 we see the routine that returns, as a vector<string>, the chain of words given the map computed by the shortest path algorithm in findChain. The function getChainFromPreviousMap passes the ﬁrst parameter by reference instead of the more natural constant reference to allow the use of operator[] to access the map. Although this is simpler to code, it is arguably inferior from a software design standpoint because it changes the parameter passing mode simply to allow expedient code.

Acknowledgment This work was supported, in part, by the National Science Foundation under grant EIA9906600. Parts of this chapter are based upon the author’s work in [9].

References [1] J. L. Bentley and M. D. McIlroy, Engineering a Sort Function, Software - Practice and Experience 23 (1993), 1249-1265. [2] D. E. Knuth, The Stanford Graphbase, Addison-Wesley, Reading, Mass., 1993. [3] J. Lajoie and S. Lippman, C++ Primer, Third Edition, Addison-Wesley, Reading, Mass., 1998. [4] S. Meyers, Eﬀective STL, Addison-Wesley, Reading, Mass., 2001. [5] D. R. Musser and A. Saini, C++ Programming with the Standard Template Library, Addison-Wesley, Reading, Mass., 1996. [6] B. Stroustrop, The C++ Programming Language, Third Edition, Addison-Wesley, Reading, Mass., 1997.

© 2005 by Chapman & Hall/CRC

Data Structures in C++

42-17

[7] B. Stroustrop, The Design and Evolution of C++, Addison-Wesley, Reading, Mass., 1994. [8] M. A. Weiss, Data Structures and Problem Solving Using C++, Second Edition, Addison-Wesley, Reading, Mass., 2000. [9] M. A. Weiss, C++ for Java Programmers, Prentice Hall, Englewood Cliﬀs, NJ., 2004. Chapter 10.

© 2005 by Chapman & Hall/CRC

43 Data Structures in JDSL 43.1 43.2

Containers and Accessors • Iterators Comparators • Algorithms

Michael T. Goodrich University of California, Irvine

43.3

Luca Vismara Brown University

43.1

43.4

•

Decorations

•

43-1 43-4

•

The Architecture of JDSL . . . . . . . . . . . . . . . . . . . . . . . . Packages • Positional Containers Containers • Algorithms

Roberto Tamassia Brown University

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Design Concepts in JDSL . . . . . . . . . . . . . . . . . . . . . . . . .

43-7

Key-Based

A Sample Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-15 Minimum-Time Flight Itineraries • Class IntegerDijkstraTemplate • Class IntegerDijkstraPathﬁnder • Class FlightDijkstra

Introduction

In the last four decades the role of computers has dramatically changed: once mainly used as number processors to perform fast numerical computations, they have gradually evolved into information processors, used to store, analyze, search, transfer, and update large collections of structured information. In order for computer programs to perform these tasks eﬀectively, the data they manipulate must be well organized, and the methods for accessing and maintaining those data must be reliable and eﬃcient. In other words, computer programs need advanced data structures and algorithms. Implementing advanced data structures and algorithms, however, is not an easy task and presents some risks: Complexity Advanced data structures and algorithms are often diﬃcult to understand thoroughly and to implement. Unreliability Because of their complexity, the implementation of advanced data structures and algorithms is prone to subtle errors in boundary cases, which may require a considerable eﬀort to identify and correct. Long development time As a consequence, implementing and testing advanced data structures and algorithms is usually a time consuming process. As a result, programmers tend to ignore advanced data structures and algorithms and to resort to simple ones, which are easier to implement and test but that are usually not as eﬃcient. It is thus clear how the development of complex software applications, in particular their rapid prototyping, can greatly beneﬁt from the availability of libraries of reliable and eﬃcient data structures and algorithms. Various libraries are available for the C++ programming language. They include the Standard Template Library (STL, see Chapter 42) [9], now part of the C++ standard, the

43-1

© 2005 by Chapman & Hall/CRC

43-2

Handbook of Data Structures and Applications

extensive Library of Eﬃcient Data Structures and Algorithms (LEDA, see Chapter 41) [8], and the Computational Geometry Algorithms Library (CGAL) [3]. The situation for the Java programming language is the following: a small library of data structures, usually referred to as Java Collections (JC), is included in the java.util package of the Java 2 Platform.∗ An alternative to the Java Collections are the Java Generic Libraries (JGL) by Recursion Software, Inc.,† which are patterned after STL. Both the Java Collections and JGL provide implementations of basic data structures such as sequences, sets, maps, and dictionaries. JGL also provides a considerable number of generic programming algorithms for transforming, permuting, and ﬁltering data. None of the above libraries for Java, however, seems to provide a coherent framework, capable of accommodating both elementary and advanced data structures and algorithms, as required in the development of complex software applications. This circumstance motivated the development of the Data Structures Library in Java (JDSL) [10], a collection of Java interfaces and classes implementing fundamental data structures and algorithms, such as: • • • • •

sequences and trees; priority queues, binary search trees, and hash tables; graphs; sorting and traversal algorithms; topological numbering, shortest path, and minimum spanning tree.

JDSL is suitable for use by researchers, professional programmers, educators, and students. It comes with extensive documentation, including detailed Javadoc,‡ an overview, a tutorial with seven lessons, and several associated research papers. It is available free of charge for noncommercial use at http://www.jdsl.org/. The development of JDSL began in September 1996 at the Center for Geometric Computing at Brown University and culminated with the release of version 1.0 in 1998. A major part of the project in the ﬁrst year was the experimentation with diﬀerent models for data structures and algorithms, and the construction of prototypes. A signiﬁcant reimplementation, documentation, and testing [1] eﬀort was carried out in 1999 leading to version 2.0, which was oﬃcially released in 2000. Starting with version 2.1, released in 2003 under a new license, the source code has been included in the distribution. During its life cycle JDSL 2.0 was downloaded by more than 5,700 users, while JDSL 2.1 has been downloaded by more than 3,500 users as of this writing. During these seven years a total of 25 people§ have been involved, at various levels, in the design and development of the library. JDSL has been used in data structures and algorithms courses worldwide as well as in two data structures and algorithms textbooks¶ written by the ﬁrst two authors [6, 7]. In the development of JDSL we tried to learn from other approaches and to progress on them in terms of ease of use and modern design. The library was designed with the following goals in mind: Functionality The library should provide a signiﬁcant collection of existing data structures and algorithms.

∗ http://java.sun.com/j2se/

† http://www.recursionsw.com/jgl.htm ‡ http://java.sun.com/j2se/javadoc/ § http://www.jdsl.org/team.html

¶ http://java.datastructures.net/

© 2005 by Chapman & Hall/CRC

and http://algorithmdesign.net/

Data Structures in JDSL

43-3

Reliability Data structures and algorithms should be correctly implemented, with particular attention to boundary cases and degeneracies. All input data should be validated and, where necessary, rejected by means of exceptions. Eﬃciency The implementations of the data structures and algorithms should match their theoretical asymptotic time and space complexity; constant factors, however, should also be considered when evaluating eﬃciency. Flexibility Multiple implementations of data structures and algorithms should be provided, so that the user can experiment and choose the most appropriate implementation, in terms of time or space complexity, for the application at hand. It should also be possible for the user to easily extend the library with additional data structures and algorithms, potentially based on the existing ones. Observe that there exist some trade-oﬀs between these design goals, e.g., between eﬃciency and reliability, or between eﬃciency and ﬂexibility. In JDSL each data structure is speciﬁed by an interface and each algorithm uses data structures only via the interface methods. Actual classes need only be speciﬁed when objects are instantiated. Programming through interfaces, rather than through actual classes, creates more general code. It allows diﬀerent implementations of the same interface to be used interchangeably, without having to modify the algorithm code. A comparison of the key features of the Java Collections, JGL, and JDSL is shown in Table 43.1. The main advantages of JDSL are the deﬁnition of a large set of data structure APIs (including binary tree, general tree, priority queue and graph) in terms of Java interfaces, the availability of reliable and eﬃcient implementations of those APIs, and the presence of some fundamental graph algorithms. Note, in particular, that the Java Collections do not include trees, priority queues and graphs, and provide only sorting algorithms.

Sequences (lists, vectors) Trees Priority queues (heaps) Dictionaries (hash tables, red-black trees) Sets Graphs Templated algorithms Sorting Data transforming, permuting, and ﬁltering Graph traversals Topological numbering Shortest path Minimum spanning tree Accessors (positions and locators) Iterators Range views Decorations (attributes) Thread-safety Serializability

JC ✓

JGL ✓ ✓

✓ ✓ ✓

✓ ✓

✓ ✓

✓ ✓

JDSL ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

✓ ✓

✓

TABLE 43.1 A comparison of the Java Collections (JC), the Generic Library for Java (JGL), and the Data Structures Library in Java (JDSL).

A good library of data structures and algorithms should be able to integrate smoothly with other existing libraries. In particular, we have pursued compatibility with the Java Collections. JDSL supplements the Java Collections and is not meant to replace them. No conﬂicts arise when using data structures from JDSL and from the Java Collections in the

© 2005 by Chapman & Hall/CRC

43-4

Handbook of Data Structures and Applications

same program. To facilitate the use of JDSL data structures in existing programs, adapter classes are provided to translate a Java Collections data structure into a JDSL one and vice versa, whenever such a translation is applicable.

43.2

Design Concepts in JDSL

In this section we examine some data organization concepts and algorithmic patterns that are particularly important in the design of JDSL.

43.2.1

Containers and Accessors

In JDSL each data structure is viewed as a container, i.e., an organized collection of objects, called the elements of the container. An element can be stored in many containers at the same time and multiple times in the same container. JDSL containers can store heterogeneous elements, i.e., instances of diﬀerent classes. JDSL provides two general and implementation-independent ways to access (but not modify) the elements stored in a container: individually, by means of accessors, and globally, by means of iterators (see Section 43.2.2). An accessor [5] abstracts the notion of membership of an element into a container, hiding the details of the implementation. It provides constant-time access to an element stored in a container, independently from its implementation. Every time an element is inserted in a container, an accessor associated with it is returned. Most operations on JDSL containers take one or more accessors as their operands.

<>

<>

Accessor

Decorable

<>

<>

Locator

Position

<>

<>

Vertex

Edge

FIGURE 43.1: The accessors interface hierarchy.

We distinguish between two kinds of containers and, accordingly, of accessors (see Figure 43.1 for a diagram of the accessor interface hierarchy): Positional containers Typical examples are sequences, trees, and graphs. In a positional container, some topological relation is established among the “place-

This

is possible since in Java every class extends (directly or indirectly) java.lang.Object.

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL holders” that store the elements, such as the predecessor-successor relation in a sequence, the parent-child relation in a tree, and the incidence relation in a graph. It is the user who decides, when inserting an element in the container, what the relationship is between the new “placeholder” and the existing ones (in a sequence, for instance, the user may decide to insert an element before a given “placeholder”). A positional container does not change its topology, unless the user requests a change speciﬁcally. The implementation of these containers usually involves linked structures or arrays. Positions The concept of position is an abstraction of the various types of “placeholders” in the implementation of a positional container (typically the nodes of a linked structure or the cells of an array). Each position stores an element. Position implementations may store the following additional information: • the adjacent positions (e.g., the previous and next positions in a sequence, the right and left child and the parent in a binary tree, the list of incident edges in a graph); • consistency information (e.g., what container the position is in, the number of children in a tree). A position can be directly queried for its element through method element(), which hides the details of where the element is actually stored, be it an instance variable or an array cell. Through the positional container, instead, it is possible to replace the element of a position or to swap the elements between two positions. Note that, as an element moves about in its container, or even from container to container, its position changes. Positions are similar to the concept of items used in LEDA [8]. Key-based containers Typical examples are dictionaries and priority queues. Every element stored in a key-based container has a key associated with it. Keys are used as an indexing mechanism for their associated elements. Typically, a key-based container is internally implemented using a positional container; for example, a possible implementation of a priority queue uses a binary tree (a heap). The details of the internal representation, however, are completely hidden to the user. Thus, the user has no control over the organization of the positions that store the key/element pairs. It is the key-based container itself that modiﬁes its internal representation based on the keys of the key/element pairs inserted or removed. Locators The key/element pairs stored in a key-based container may change their positions in the underlying positional container, due to some internal restructuring, say, after the insertion of a new key/element pair. For example, in the binary tree implementation of a priority queue, the key/element pairs move around the tree to preserve the top-down ordering of the keys, and thus their positions change. Hence, a diﬀerent, more abstract type of accessor, called locator, is provided to access a key/element pair stored in a key-based container. Locators hide the complications of dynamically maintaining the implementation-dependent binding between the key/element pairs and their positions in the underlying positional container. A locator can be directly queried for its key and element, and through the keybased container it is possible to replace the key and the element of a locator. An example of using locators is given in Section 43.4.

© 2005 by Chapman & Hall/CRC

43-5

43-6

43.2.2

Handbook of Data Structures and Applications

Iterators

While accessors allow users to access single elements or key/element pairs in a container, iterators provide a simple mechanism for iteratively listing through a collection of objects. JDSL provides various iterators over the elements, the keys (where present), and the positions or the locators of a container (see Figure 43.2 for a diagram of the iterator interface hierarchy). They are similar to the iterators provided by the Java Collections.

<>

ObjectIterator

<>

<>

LocatorIterator

PositionIterator

<>

<>

VertexIterator

EdgeIterator

FIGURE 43.2: The iterators interface hierarchy.

All JDSL containers provide methods that return iterators over the entire container (e.g., all the positions of a tree or all the locators of a dictionary). In addition, some methods return iterators over portions of the container (e.g., the children of a position of a tree or the locators with a given key in a dictionary). JDSL iterators can be traversed only forward; however, they can be reset to start a new traversal. For simplicity reasons iterators in JDSL have snapshot semantics: they refer to the state of the container at the time the iterator was created, regardless of the possible subsequent modiﬁcations of the container. For example, if an iterator is created over all the positions of a tree and then a subtree is cut oﬀ, the iterator will still include the positions of the removed subtree.

43.2.3

Decorations

Another feature of JDSL is the possibility to “decorate” individual positions of a positional container with attributes, i.e., with arbitrary objects. This mechanism is more convenient and ﬂexible than either subclassing the position class to add new instance variables or creating global hash tables to store the attributes. Decorations are useful for storing temporary or permanent results of the execution of an algorithm. For example, in a depth-ﬁrst search (DFS) traversal of a graph, we can use decorations to (temporarily) mark the vertices being visited and to (permanently) store the computed DFS number of each vertex. An example of using decorations is given in Section 43.4.

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL

43.2.4

43-7

Comparators

When using a key-based container, the user should be able to specify the comparison relation to be used with the keys. In general, this relation depends on the type of the keys and on the speciﬁc application for which the key-based container is used: keys of the same type may be compared diﬀerently in diﬀerent applications. One way to fulﬁll this requirement is to specify the comparison relation through a comparator object, which is passed to the key-based container constructor and is then used by the key-based container every time two keys need to be compared.

<>

EqualityComparator

<>

<>

Comparator

HashComparator

FIGURE 43.3: The comparators interface hierarchy.

Three comparator interfaces are deﬁned in JDSL (see Figure 43.3 for a diagram of the comparators interface hierarchy). The concept of comparator is present also in the java.util package of the Java 2 Platform, where a Comparator interface is deﬁned.

43.2.5

Algorithms

JDSL views algorithms as objects that receive the input data as arguments of their execute(.) method, and provide access to the output during or after the execution via additional methods. Most algorithms in JDSL are implemented following the template method pattern [4]. The invariant part of the algorithm is implemented once in an abstract class, deferring the implementation of the steps that can vary to subclasses. These varying steps are deﬁned either as abstract methods (whose implementation must be provided by a subclass) or as “hook” methods (whose default implementation may be overridden in a subclass). In other words, algorithms perform “generic” computations that can be specialized for speciﬁc tasks by subclasses. An example of applying the template method pattern is given in Section 43.4, where we use the JDSL implementation of Dijkstra’s single-source shortest path algorithm [2]. The algorithm refers to the edge weights by means of an abstract method that can be specialized depending on how the weights are actually stored or computed in the application at hand.

43.3

The Architecture of JDSL

In this section we describe the interfaces of the data structures present in JDSL, the classes that implement those interfaces, and the algorithms that operate on them. Most containers are described by two interfaces, one (whose name is preﬁxed with Inspectable) that comprise all the methods to query the container, and the other, extending the ﬁrst, that comprise all the methods to modify the container. Inspectable interfaces can be used as variable

© 2005 by Chapman & Hall/CRC

43-8

Handbook of Data Structures and Applications

or argument types in order to obtain an immutable view of a container (for instance, to prevent an algorithm from modifying the container it operates on). As described in Section 43.2.1, we can partition the set of containers present in JDSL into two subsets: the positional containers and the key-based containers. Accordingly, the interfaces for the various containers are organized into two hierarchies (see Figures 43.4 and 43.5), with a common root given by interfaces InspectableContainer and Container. At the same time, container interfaces, their implementations, and algorithms that operate on them are grouped into various Java packages. In the rest of this section, we denote with n the current number of elements stored in the container being considered.

43.3.1

Packages

JDSL currently consists of eight Java packages, each containing a set of interfaces and/or classes. Interfaces and exceptions for the data structures are deﬁned in packages with the api suﬃx, while the reference implementations of these interfaces are deﬁned in packages with the ref suﬃx. Interfaces, classes, and exceptions for the algorithms are instead grouped on a functional basis. As we will see later, the interfaces are arranged in hierarchies that may extend across diﬀerent packages. The current packages are the following: jdsl.core.api Interfaces and exceptions that compose the API for the core containers (sequences, trees, priority queues, and dictionaries), for their accessors and comparators, and for the iterators on their elements, positions and locators. jdsl.core.ref Implementations of the interfaces in jdsl.core.api. Most implementations have names of the form ImplementationStyleInterfaceName. For instance, ArraySequence and NodeSequence implement the jdsl.core.api.Sequence interface with a growable array and with a linked structure, respectively. Classes with names of the form AbstractInterfaceName implement some methods of the interface for the convenience of developers building alternative implementations. jdsl.core.algo.sorts Sorting algorithms that operate on the elements stored in a jdsl.core. api.Sequence object. They are parameterized with respect to the comparison rule used to sort the elements, provided as a jdsl.core.api.Comparator object. jdsl.core.algo.traversals Traversal algorithms that operate on jdsl.core.api.InspectableTree objects. A traversal algorithm performs operations while visiting the nodes of the tree, and can be extended by applying the template method pattern. jdsl.core.util This package contains a Converter class to convert some JDSL containers to the equivalent data structures of the Java Collections and vice versa. jdsl.graph.api Interfaces and exceptions that compose the API for the graph container and for the iterators on its vertices and edges. jdsl.graph.ref Implementations of the interfaces in jdsl.graph.api; in particular, class IncidenceListGraph is an implementation of interface jdsl.graph.api.Graph. jdsl.graph.algo Basic graph algorithms, including depth-ﬁrst search, topological numbering, shortest path, and minimum spanning tree, all of which can be extended by applying the template method pattern.

43.3.2

Positional Containers

All positional containers implement interfaces InspectablePositionalContainer and PositionalContainer, which extend InspectableContainer and Container, respectively (see Figure 43.4).

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL

43-9 <>

InspectableContainer

<>

<>

Container

InspectablePositionalContainer

<>

<>

<>

<>

PositionalContainer

InspectableSequence

InspectableTree

InspectableGraph

<>

Sequence

<>

<>

Tree

InspectableBinaryTree

<>

BinaryTree

<>

ModifiableGraph

<>

Graph

FIGURE 43.4: The positional containers interface hierarchy.

Every positional container implements a set of essential operations, including being able to determine its own size (size()), to determine whether it contains a speciﬁc position (contains(Accessor)), to replace the element associated with a position (replaceElement(Accessor,Object)), to swap the elements associated with two positions (swapElements(Position, Position)), and to get iterators over the positions (positions()) or the elements (elements()) of the container.

© 2005 by Chapman & Hall/CRC

43-10

Handbook of Data Structures and Applications

Sequences

A sequence is a basic data structure used for storing elements in a linear, ranked fashion (see Chapter 2). Sequences can be implemented in many ways, e.g., as a linked list of nodes or on top of an array. In JDSL, sequences are described by interfaces InspectableSequence and Sequence, which extend InspectablePositionalContainer and PositionalContainer, respectively. In addition to the basic methods common to all positional containers, the sequence interfaces provide methods to access and modify positions at the sequence ends (methods such as ﬁrst(), insertLast() and removeFirst()) or speciﬁc positions along the sequence (methods such as after(Position), atRank(int), insertBefore(Position) and removeAtRank(int)). NodeSequence is an implementation of Sequence based on a doubly linked list of nodes. The nodes are the positions of the sequence. It takes O(1) time to insert, remove, or access both ends of the sequence or a position before or after a given one, while it takes O(n) time to insert, remove, or access positions at a given rank in the sequence. Thus, NodeSequence instances can be suitably used as stacks, queues, or deques. ArraySequence is an implementation of Sequence based on a growable array of positions. Instances can be created with an initial capacity, and can be told whether or not to reduce this capacity when their size drops below a certain value, depending on whether the user prefers space or time eﬃciency. It takes O(1) time to access any position in the sequence, O(1) amortized time over a series of operations to insert or remove elements at the end of the sequence, and O(n) time to insert or remove elements at the beginning or middle of the sequence. Hence, ArraySequence instances can be suitably used for quick access to the elements after their initial insertion, when ﬁlled only at the end, or as stacks. Trees

Trees allow more sophisticated relationships between elements than is possible with a sequence: they allow relationships between a child and its parent, or between siblings of a parent (see Chapter 3). InspectableTree and Tree are the interfaces describing a general tree; they extend InspectablePositionalContainer and PositionalContainer, respectively. InspectableBinaryTree, which extends InspectableTree, and BinaryTree, which extends PositionalContainer, are the interfaces describing a binary tree. In addition to the basic methods common to all positional containers, the tree interfaces provide methods to determine where in the tree a position lies (methods such as isRoot(Position) and isExternal(Position)), to return the parent (parent(Position)), siblings (siblings(Position)) or children (methods such as children(Position), childAtRank(Position,int) and leftChild(Position)) of a position, and to cut (cut(Position)) or link (link(Position,Tree)) a subtree. NodeTree is an implementation of Tree based on a linked structure of nodes. The nodes are the positions of the tree. It is the implementation to use when a generic tree is needed or for building more specialized (nonbinary) trees. NodeTree instances always contain at least one node. NodeBinaryTree is an implementation of BinaryTree based on a linked structure of nodes. The nodes are the positions of the tree. Similarly to NodeTree, NodeBinaryTree instances always contain at least one node; in addition, each node can have either zero or two children. If a more complex tree is not necessary, using NodeBinaryTree instances will be faster and easier than using NodeTree ones. Graphs

A graph is a fundamental data structure describing a binary relationship on a set of elements (see Chapter 4) and it is used in a variety of application areas. Each vertex of the graph

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL

43-11

may be linked to other vertices through edges. Edges can be either one-way, directed edges, or two-way, undirected edges. In JDSL, both vertices and edges are positions of the graph. JDSL handles all graph special cases such as self-loops, multiple edges between two vertices, and disconnected graphs. The main graph interfaces are InspectableGraph, which extends InspectablePositionalContainer, ModiﬁableGraph, which extends PositionalContainer, and Graph, which extends both InspectableGraph and ModiﬁableGraph. These interfaces provide methods to determine whether two vertices are adjacent (areAdjacent(Vertex,Vertex)) or whether a vertex and an edge are incident (areIncident(Vertex,Edge)), to determine the degree of a vertex (degree(Vertex)), to determine the origin (origin(Edge)) or destination (destination(Edge)) of an edge, to insert (insertVertex(Object)) or remove (removeVertex(Vertex)) a vertex, to set the direction of an edge (setDirectionFrom(Edge,Vertex) and setDirectionTo(Edge,Vertex)), to insert (insertEdge(Vertex,Vertex,Object)), remove (removeEdge(Edge)), split (splitEdge(Edge, Object)), or unsplit (unsplitEdge(Vertex,Object)) an edge. IncidenceListGraph is an implementation of Graph. As its name suggests, it is based on an incidence list representation of a graph.

43.3.3

Key-Based Containers

All key-based containers implement interfaces InspectableKeyBasedContainer and KeyBasedContainer, which extend InspectableContainer and Container, respectively (see Figure 43.5). Every key-based container implements a set of essential operations, including being able to determine its own size (size()), to determine whether it contains a speciﬁc locator <>

InspectableContainer

<>

<>

InspectableKeyBasedContainer

Container

<>

<>

InspectableDictionary

KeyBasedContainer

<>

<>

<>

InspectableOrderedDictionary

Dictionary

PriorityQueue

<>

OrderedDictionary

FIGURE 43.5: The key-based containers interface hierarchy.

© 2005 by Chapman & Hall/CRC

43-12

Handbook of Data Structures and Applications

(contains(Accessor)), to replace the key (replaceKey(Locator,Object)) or the element (replaceElement(Accessor,Object)) associated with a locator, to insert (insert(Object,Object)) or remove (remove(Locator)) a key/element pair, and to get iterators over the locators (locators()), the keys (keys()) or the elements (elements()) of the container. Priority queues

A priority queue is a data structure used for storing a collection of elements prioritized by keys, where the smallest key value indicates the highest priority (see Part II). It supports arbitrary insertions and deletions of elements and keeps track of the highest-priority key. A priority queue is useful, for instance, in applications where the user wishes to store a queue of tasks of varying priority, and always process the most important task. Interface PriorityQueue extends KeyBasedContainer. In addition to the basic methods common to all the key-based containers, it provides methods to access (min()) or remove (removeMin()) the key/element pair with highest priority, i.e., with minimum key. Note that the priority of an element can be changed using method replaceKey(Locator,Object), inherited from KeyBasedContainer. ArrayHeap is an eﬃcient implementation of PriorityQueue based on a heap. Inserting, removing, or changing the key of a key/element pair takes O(log n) time, while examining the key/element pair with the minimum key takes O(1) time. The implementation is parameterized with respect to the comparison rule used to order the keys; to this purpose, a Comparator object is passed as an argument to the ArrayHeap constructors. Dictionaries

A dictionary is a data structure used to store key/element pairs and then quickly search for them using their keys (see Part III). An ordered dictionary is a particular dictionary where a total order on the set of keys is deﬁned. All JDSL dictionaries are multi-maps, i.e., they can store multiple key/element pairs with the same key. The main dictionary interfaces are InspectableDictionary and Dictionary, which extend InspectableKeyBasedContainer and KeyBasedContainer, respectively. In addition to the basic methods common to all the key-based containers, these interfaces provide methods to ﬁnd key/element pairs by their keys (ﬁnd(Object) and ﬁndAll(Object)) and to remove all key/element pairs with a speciﬁc key (removeAll(Object)). Other dictionary interfaces are InspectableOrderedDictionary and OrderedDictionary, which extend InspectableDictionary and Dictionary, respectively. They provide additional methods to access the ﬁrst (ﬁrst()) or last (last()) key/element pair in the ordered dictionary, and to access the key/element pair before (before(Locator)) or after (after(Locator)) a given key/element pair. HashtableDictionary is an implementation of Dictionary. As its name suggests, it is based on a hash table. Insertions and removals of key/element pairs usually take O(1) time, although individual insertions and removals may require O(n) time. The implementation is parameterized with respect to the hashing function used to store the key/element pairs; to this purpose, a HashComparator object is passed as an argument to the HashtableDictionary constructors. HashtableDictionary is a good choice when overall speed is necessary. RedBlackTree is an implementation of OrderedDictionary. It is a particular type of binary search tree, where insertion, removal, and access to key/element pairs require each O(log n) time. The implementation is parameterized with respect to the comparison rule used to order the keys; to this purpose, a Comparator object is passed as an argument to the RedBlackTree constructors.

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL

43.3.4

43-13

Algorithms

In addition to the data structures described above, JDSL includes various algorithms that operate on them. Sequence sorting

JDSL provides a suite of sorting algorithms for diﬀerent applications. They all implement the SortObject interface, whose only method is sort(Sequence,Comparator). Sorting algorithms with the preﬁx List are most eﬃcient when used on instances of NodeSequence while those with the preﬁx Array are most eﬃcient when used on instances of ArraySequence. ArrayQuickSort is an implementation of the quicksort algorithm. This algorithm runs in O(n log n) expected time and performs very well in practice. Its performance, however, degrades greatly if the sequence is already very close to being sorted. Also, it is not stable, i.e., it does not guarantee that elements with the same value will remain in the same order they were in before sorting. In all cases whether neither of these caveats apply, it is the best choice. ListMergeSort and ArrayMergeSort are two implementations of the mergesort algorithm. This algorithm is not as fast as quicksort in practice, even though its theoretical time complexity is O(n log n). There are no cases where its performance will degrade due to peculiarities in the input data, and it is a stable sort. HeapSort is an implementation of the heapsort algorithm, and uses an instance of ArrayHeap (see Section 43.3.3) as a sorting device. Its performance, like that of mergesort, will not degrade due to peculiarities in the input data, but it is not a stable sort. Its theoretical time complexity is O(n log n). Iterator-based tree traversals

JDSL provides two types of tree traversals. The ﬁrst type is based on iterators: the tree is passed as an argument to the iterator constructor and is then iterated over using methods hasNext() and nextPosition(). Iterators give a quick traversal of the tree in a speciﬁc order, and are the proper traversals to use when this is all that is required. We recall that iterators in JDSL have snapshots semantics (see Section 43.2.2). A preorder iterator visits the nodes of the tree in preorder, i.e., it returns a node before returning any of its children. Preorder iterators work for both binary and general trees; they are implemented in class PreOrderIterator. A postorder iterator visits the nodes of the tree in postorder, i.e., it returns a node after returning all of its children. Postorder iterators work for both binary and general trees; they are implemented in class PostOrderIterator. An inorder iterator visits the nodes of the tree in inorder, i.e., it returns a node in between its left and right children. Inorder iterators work only for binary trees; they are implemented in class InOrderIterator. Euler tour tree traversal

The second type of tree traversals in JDSL is named Euler tour: it is implemented — in class EulerTour — as an algorithm object, which can be extended by applying the template method pattern. The Euler tour visits each node of the tree several times, namely, a ﬁrst time before traversing any of the subtrees of the node, then between the traversals of any two consecutive subtrees, and a last time after traversing all the subtrees. Each time a node is

© 2005 by Chapman & Hall/CRC

43-14

Handbook of Data Structures and Applications

visited, one of the methods visitFirstTime(Position), visitBetweenChildren(Position) and visitLastTime(Position), if the node is internal, or method visitExternal(Position), if the node is a leaf, is automatically called. A particular computation on the visited tree may be performed by suitably overriding those methods in a subclass of EulerTour. The Euler tour is more powerful than the iterators described above as it can be used to implement more general kinds of algorithms. Note that, unlike the iterators, the Euler tour does not have snapshot semantics; this means that any modiﬁcation of the tree during the execution of the Euler tour will cause undeﬁned behavior. Graph traversals

The depth-ﬁrst search (DFS) traversal of a graph is available in JDSL. Depth-ﬁrst search proceeds by visiting an unvisited vertex adjacent to the current one; if no such vertex exists, then the algorithm backtracks to the previous visited vertex. Similarly to the Euler tour, depth-ﬁrst search is implemented in JDSL as an algorithm object, which can be extended by applying the template method pattern. The basic implementation of depth-ﬁrst search — DFS — is designed to work on undirected graphs. The user can specify actions to occur when a vertex is ﬁrst or last visited or when diﬀerent sorts of edges (such as “tree” edges of the DFS tree or “back” edges to previously visited vertices) are traversed by subclassing DFS and suitably overriding some methods. DFS has two subclasses: FindCycleDFS, an algorithm for determining cycles in an undirected graph, and DirectedDFS, a depth-ﬁrst search specialized for directed graphs. In turn, DirectedDFS has one subclass: DirectedFindCycleDFS, an algorithm for determining cycles in a directed graph. These subclasses are examples of how to apply the template method pattern to DFS in order to implement a more speciﬁc algorithm. Topological numbering

A topological numbering is a numbering of the vertices of a directed acyclic graph such that, if there is an edge from vertex u to vertex v, then the number associated with v is higher than the number associated with u. Two algorithms that compute a topological numbering are included in JDSL: TopologicalSort, which decorates each vertex with a unique number, and UnitWeightedTopologicalNumbering, which decorates each vertex with a nonnecessarily unique number based on how far the vertex is from the source of the graph. Both topological numbering algorithms extend abstract class AbstractTopologicalSort. Dijkstra’s algorithm

Dijkstra’s algorithm computes the shortest path from a speciﬁc vertex to every other vertex of a weighted connected graph. The JDSL implementation of Dijkstra’s algorithm — IntegerDijkstraTemplate — follows the template method pattern and can be easily extended to change its functionality. Extending it makes it possible, for instance, to set the function for calculating the weight of an edge, to change the way the results are stored, or to stop the execution of the algorithm after computing the shortest path to a speciﬁc vertex (as done in subclass IntegerDijkstraPathﬁnder). An example of using Dijkstra’s algorithm is given in Section 43.4. The Prim-Jarn´ık algorithm

The Prim-Jarn´ık algorithm computes a minimum spanning tree of a weighted connected graph, i.e., a tree that contains all the vertices of the graph and has the minimum total

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL

43-15

weight over all such trees. The JDSL implementation of the Prim-Jarn´ık algorithm — IntegerPrimTemplate — follows the template method pattern and can be easily extended to change its functionality. Extending it makes it possible, for instance, to set the function for calculating the weight of an edge, to change the way the results are stored, or to stop the execution of the algorithm after computing the minimum spanning tree for a limited set of vertices.

43.4

A Sample Application

In this section we explore the implementation of a sample application using JDSL. In particular, we show the use of some of the concepts described above, such as the graph and priority queue data structures, locators, decorations, and the template method pattern.

43.4.1

Minimum-Time Flight Itineraries

We consider the problem of calculating a minimum-time ﬂight itinerary between two airports. The ﬂight network can be modeled using a weighted directed graph: each vertex of the graph represents an airport, each directed edge represents a ﬂight from the origin airport to the destination airport, and the weight of each directed edge is the duration of the ﬂight. The problem we are considering can be solved by computing a shortest path between two vertices of the directed graph or determining that a path does not exists. To this purpose, we can suitably modify the classical algorithm by Dijkstra [2], which takes as input a graph G with nonnegative edge weights and a distinguished source vertex s, and computes a shortest path from s to any reachable vertex of G. Dijkstra’s algorithm maintains a priority queue Q of vertices: at any time, the key of a vertex u in the priority queue is the length of the shortest path from s to u thus far. The priority queue is initialized by inserting vertex s with key 0 and all the other vertices with key +∞ (some very large number). The algorithm repeatedly executes the following two steps: 1. Remove a minimum-key vertex u from the priority queue and mark it as ﬁnished, since a shortest path from s to u has been found. 2. For each edge e connecting u to an unﬁnished vertex v, if the path formed by extending a shortest path from s to u with edge e is shorter than the shortest known path from s to v, update the key of v (this operation is known as the relaxation of edge e).

43.4.2

Class IntegerDijkstraTemplate

As seen in Section 43.3.4, JDSL provides an implementation of Dijkstra’s algorithm that follows the template method pattern. The abstract class implementing Dijkstra’s algorithm is jdsl.graph.algo.IntegerDijkstraTemplate (see Figures 43.6–43.8; for brevity, the Javadoc comments present in the library code have been removed). The simplest way to run the algorithm is by calling execute(InspectableGraph,Vertex), which ﬁrst initializes the various auxiliary data structures with init(g,source) and then repeatedly calls doOneIteration(). Note that the number of times doOneIteration() is called is controlled by shouldContinue(). Another possibility, instead of calling execute(InspectableGraph,Vertex), is to call init(InspectableGraph,Vertex) directly and then single-step the algorithm by explicitly calling doOneIteration(). For an eﬃcient implementation of the algorithm, it is important to access a vertex stored

© 2005 by Chapman & Hall/CRC

43-16

Handbook of Data Structures and Applications

package jdsl.graph.algo; import import import import

jdsl.core.api.*; jdsl.core.ref.ArrayHeap; jdsl.core.ref.IntegerComparator; jdsl.graph.api.*;

public abstract class IntegerDijkstraTemplate { // instance variables protected PriorityQueue pq ; protected InspectableGraph g ; protected Vertex source ; private final Integer ZERO = new Integer(0); private final Integer INFINITY = new Integer(Integer.MAX VALUE); private final Object LOCATOR = new Object(); private final Object DISTANCE = new Object(); private final Object EDGE TO PARENT = new Object(); // abstract instance methods protected abstract int weight (Edge e); // instance methods that may be overridden for special applications protected void shortestPathFound (Vertex v, int vDist) { v.set(DISTANCE,new Integer(vDist)); } protected void vertexNotReachable (Vertex v) { v.set(DISTANCE,INFINITY); setEdgeToParent(v,Edge.NONE); } protected void edgeRelaxed (Vertex u, int uDist, Edge uv, int uvWeight, Vertex v, int vDist) { } protected boolean shouldContinue () { return true; } protected boolean isFinished (Vertex v) { return v.has(DISTANCE); } protected void setLocator (Vertex v, Locator vLoc) { v.set(LOCATOR,vLoc); } protected Locator getLocator (Vertex v) { return (Locator)v.get(LOCATOR); } protected void setEdgeToParent (Vertex v, Edge vEdge) { v.set(EDGE TO PARENT,vEdge); }

FIGURE 43.6: Class IntegerDijkstraTemplate.

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL

protected EdgeIterator incidentEdges (Vertex v) { return g .incidentEdges(v,EdgeDirection.OUT | EdgeDirection.UNDIR); } protected Vertex destination (Vertex origin, Edge e) { return g .opposite(origin,e); } protected VertexIterator vertices () { return g .vertices(); } protected PriorityQueue newPQ () { return new ArrayHeap(new IntegerComparator()); } // output instance methods public final boolean isReachable (Vertex v) { return v.has(EDGE TO PARENT) && v.get(EDGE TO PARENT) != Edge.NONE; } public final int distance (Vertex v) throws InvalidQueryException { try { return ((Integer)v.get(DISTANCE)).intValue(); } catch (InvalidAttributeException iae) { throw new InvalidQueryException(v+" has not been reached yet"); } } public Edge getEdgeToParent (Vertex v) throws InvalidQueryException { try { return (Edge)v.get(EDGE TO PARENT); } catch (InvalidAttributeException iae) { String s = (v == source ) ? " is the source vertex" : " has not been reached yet"; throw new InvalidQueryException(v+s); } } // instance methods composing the core of the algorithm public void init (InspectableGraph g, Vertex source) { g = g; source = source; pq = newPQ(); VertexIterator vi = vertices(); while (vi.hasNext()) { Vertex u = vi.nextVertex(); Integer uKey = (u == source ) ? ZERO : INFINITY; Locator uLoc = pq .insert(uKey,u); setLocator(u,uLoc); } }

FIGURE 43.7: Class IntegerDijkstraTemplate (continued).

© 2005 by Chapman & Hall/CRC

43-17

43-18

Handbook of Data Structures and Applications

protected final void runUntil () { while (!pq .isEmpty() && shouldContinue()) doOneIteration(); } public final void doOneIteration () throws InvalidEdgeException { Integer minKey = (Integer)pq .min().key(); Vertex u = (Vertex)pq .removeMin(); // remove a vertex with minimum distance from the source if (minKey == INFINITY) vertexNotReachable(u); else { // the general case int uDist = minKey.intValue(); shortestPathFound(u,uDist); int maxEdgeWeight = INFINITY.intValue()−uDist−1; EdgeIterator ei = incidentEdges(u); while (ei.hasNext()) { // examine all the edges incident with u Edge uv = ei.nextEdge(); int uvWeight = weight(uv); if (uvWeight < 0 | | uvWeight > maxEdgeWeight) throw new InvalidEdgeException ("The weight of "+uv+" is either negative or causing overflow"); Vertex v = destination(u,uv); Locator vLoc = getLocator(v); if (pq .contains(vLoc)) { // v is not finished yet int vDist = ((Integer)vLoc.key()).intValue(); int vDistViaUV = uDist+uvWeight; if (vDistViaUV < vDist) { // relax pq .replaceKey(vLoc,new Integer(vDistViaUV)); setEdgeToParent(v,uv); } edgeRelaxed(u,uDist,uv,uvWeight,v,vDist); } } } } public final void execute (InspectableGraph g, Vertex source) { init(g,source); runUntil(); } public void cleanup () { VertexIterator vi = vertices(); while (vi.hasNext()) { vi.nextVertex().destroy(LOCATOR); try { vi.vertex().destroy(EDGE TO PARENT); vi.vertex().destroy(DISTANCE); } catch (InvalidAttributeException iae) { } } } }

// class IntegerDijkstraTemplate

FIGURE 43.8: Class IntegerDijkstraTemplate (continued).

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL

43-19

in the priority queue in constant time, whenever its key has to be modiﬁed. This is possible through the locator accessors provided by class jdsl.core.ref.ArrayHeap (see Section 43.3.3). In init(InspectableGraph,Vertex), each vertex u of the graph is inserted in the priority queue and a locator uLoc for the key/element pair is returned. By calling setLocator(u,uLoc), each vertex u is decorated with its locator uLoc; variable LOCATOR is used as the attribute name. Later, in doOneIteration(), the locator of vertex v is retrieved by calling getLocator(v) in order to access and possibly modify the key of v; we recall that the key of v is the shortest known distance from the source vertex source to v. In addition to its locator in the priority queue, every unﬁnished vertex v is also decorated with its last relaxed incident edge uv by calling setEdgeToParent(v,uv); variable EDGE TO PARENT is used as the attribute name, in this case. When a vertex is ﬁnished, this decoration stores the edge to the parent in the shortest path tree, and can be retrieved with getEdgeToParent(Vertex). Methods runUntil() and doOneIteration() are declared ﬁnal and thus cannot be overridden. Following the template method pattern, they call some methods, namely, shouldContinue(), vertexNotReachable(Vertex), shortestPathFound(Vertex,int), and edgeRelaxed(Vertex,int,Edge, int,Vertex,int), that may be overridden in a subclass for special applications. For each vertex u of the graph, either vertexNotReachable(u) or shortestPathFound(u,uDist) is called exactly once, when u is removed from the priority queue and marked as ﬁnished. In particular, shortestPathFound(u,uDist) decorates u with uDist, the shortest distance from source ; variable DISTANCE is used as the attribute name. Method edgeRelaxed(u,uDist,uv,uvWeight,v,vDist) is called every time an edge uv from a ﬁnished vertex u to an unﬁnished vertex v is examined. The only method whose implementation must be provided by a subclass is abstract method weight(Edge), which returns the weight of an edge. Other important methods are isFinished(Vertex), which returns whether a given vertex is marked as ﬁnished, and distance(Vertex), which returns the shortest distance from source to a given ﬁnished vertex.

43.4.3

Class IntegerDijkstraPathﬁnder

JDSL also provides a specialization of Dijkstra’s algorithm to the problem of ﬁnding a shortest path between two vertices of a graph. This algorithm is implemented in abstract class jdsl.graph.algo.IntegerDijkstraPathﬁnder (see Figure 43.9; for brevity, the Javadoc comments present in the library code have been removed), which extends IntegerDijkstraTemplate. The algorithm is run by calling execute(InspectableGraph,Vertex,Vertex). The execution of Dijkstra’s algorithm is stopped as soon as the destination vertex is ﬁnished. To this purpose, shouldContinue() is overridden to return true only if the destination vertex has not been ﬁnished yet. Additional methods are provided in IntegerDijkstraPathﬁnder to test, after the execution of the algorithm, whether a path from the source vertex to the destination vertex exists (pathExists()), and, in this case, to return it (reportPath()).

43.4.4

Class FlightDijkstra

Our application for computing a minimum-time ﬂight itinerary between two airports can be implemented as a specialization of IntegerDijkstraPathﬁnder. The distance of each vertex represents, in this case, the time elapsed from the beginning of the travel to the arrival at the airport represented by that vertex. In Figure 43.10 we show the code of class FlightDijkstra; this class is part of the tutorial∗∗ distributed with JDSL. All it takes to implement our

∗∗ http://www.jdsl.org/tutorial/tutorial.html

© 2005 by Chapman & Hall/CRC

43-20

Handbook of Data Structures and Applications

package jdsl.graph.algo; import import import import

jdsl.core.api.*; jdsl.core.ref.NodeSequence; jdsl.graph.api.*; jdsl.graph.ref.EdgeIteratorAdapter;

public abstract class IntegerDijkstraPathﬁnder extends IntegerDijkstraTemplate { // instance variables private Vertex dest ; // overridden instance methods from IntegerDijkstraTemplate protected boolean shouldContinue () { return !isFinished(dest ); } // output instance methods public boolean pathExists () { return isFinished(dest ); } public EdgeIterator reportPath () throws InvalidQueryException { if (!pathExists()) throw new InvalidQueryException("No path exists between "+source +" and "+dest ); else { Sequence retval = new NodeSequence(); Vertex currVertex = dest ; while (currVertex != source ) { Edge currEdge = getEdgeToParent(currVertex); retval.insertFirst(currEdge); currVertex = g .opposite(currVertex,currEdge); } return new EdgeIteratorAdapter(retval.elements()); } } // instance methods public final void execute (InspectableGraph g, Vertex source, Vertex dest) { dest = dest; init(g,source); if (source != dest ) runUntil(); } }

// class IntegerDijkstraPathfinder

FIGURE 43.9: Class IntegerDijkstraPathﬁnder. application is to override method incidentEdges(), so that only the outgoing edges of a ﬁnished vertex are examined, and to deﬁne method weight(Edge). As noted before, the weighted graph representing the ﬂight network is a directed graph. Each edge stores, as an element, an instance of auxiliary class FlightSpecs providing the departure time and the duration of the corresponding ﬂight. Note that the weights of the edges are not determined before the execution of the algorithm, but rather depend on the computed shortest distance

© 2005 by Chapman & Hall/CRC

Data Structures in JDSL

43-21

import jdsl.graph.api.*; import jdsl.graph.algo.IntegerDijkstraPathﬁnder; import support.*; public class FlightDijkstra extends IntegerDijkstraPathﬁnder { // instance variables private int startTime ; // overridden instance methods from IntegerDijkstraPathfinder protected int weight (Edge e) { FlightSpecs eFS = (FlightSpecs)e.element(); // the flightspecs for the flight along edge e int connectingTime = TimeTable.diﬀ(eFS.departureTime(),startTime +distance(g .origin(e))); return connectingTime+eFS.ﬂightDuration(); } protected EdgeIterator incidentEdges (Vertex v) { return g .incidentEdges(v,EdgeDirection.OUT); } // instance methods public void execute (InspectableGraph g, Vertex source, Vertex dest, int startTime) { startTime = startTime; super.execute(g,source,dest); } }

FIGURE 43.10: Class FlightDijkstra. between the source vertex and the origin of each edge. Namely, they are obtained by adding the duration of the ﬂight corresponding to the edge and the connecting time at the origin airport for that ﬂight.†† Method TimeTable.diﬀ(int,int) simply computes the diﬀerence between its two arguments modulo 24 hours. The algorithm is run by calling execute(InspectableGraph,Vertex,Vertex,int), where the fourth argument is the earliest time the passenger can begin traveling. As we can see from this example, the availability in JDSL of a set of carefully designed and extensible data structures and algorithms makes it possible to implement moderately complex applications with a small amount of code, thus dramatically reducing the development time.

Acknowledgments We would like to thank all the members of the JDSL Team for their fundamental role in the design, implementation, and testing of JDSL. It has been a great experience and a real pleasure working together.

†† In

this sample application we ignore the minimum connecting time requirement, which however could be accommodated with minor code modiﬁcations.

© 2005 by Chapman & Hall/CRC

43-22

Handbook of Data Structures and Applications

This work was supported in part by the National Science Foundation under grants CCR0098068 and DUE-0231202.

References [1] R. S. Baker, M. Boilen, M. T. Goodrich, R. Tamassia, and B. A. Stibel. Testers and visualizers for teaching data structures. In Proc. 30th ACM SIGCSE Tech. Sympos., pages 261–265, 1999. [2] E. W. Dijkstra. A note on two problems in connexion with graphs. Numerische Mathematik, 1:269–271, 1959. [3] A. Fabri, G.-J. Giezeman, L. Kettner, S. Schirra, and S. Sch¨ onherr. On the design of CGAL a computational geometry algorithms library. Softw. – Pract. Exp., 30(11):1167–1202, 2000. [4] E. Gamma, R. Helm, R. Johnson, and J. Vlissides. Design Patterns. Addison-Wesley, Reading, MA, 1995. [5] M. T. Goodrich, M. Handy, B. Hudson, and R. Tamassia. Accessing the internal organization of data structures in the JDSL library. In M. T. Goodrich and C. C. McGeoch, editors, Algorithm Engineering and Experimentation (Proc. ALENEX ’99), volume 1619 of Lecture Notes Comput. Sci., pages 124–139. Springer-Verlag, 1999. [6] M. T. Goodrich and R. Tamassia. Data Structures and Algorithms in Java. John Wiley & Sons, New York, NY, 2nd edition, 2001. [7] M. T. Goodrich and R. Tamassia. Algorithm Design: Foundations, Analysis, and Internet Examples. John Wiley & Sons, New York, NY, 2002. [8] K. Mehlhorn and S. N¨ aher. LEDA: A Platform for Combinatorial and Geometric Computing. Cambridge University Press, Cambridge, England, 1999. [9] D. R. Musser, G. J. Derge, and A. Saini. STL Tutorial and Reference Guide: C++ Programming with the Standard Template Library. Addison-Wesley, Reading, MA, 2nd edition, 2001. [10] R. Tamassia, M. T. Goodrich, L. Vismara, M. Handy, G. Shubina, R. Cohen, B. Hudson, R. S. Baker, N. Gelfand, and U. Brandes. JDSL: The data structures library in Java. Dr. Dobb’s Journal, (323):21–31, Apr. 2001.

© 2005 by Chapman & Hall/CRC

44 Data Structure Visualization 44.1 44.2 44.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-1 Value of Data Structure Rendering . . . . . . . . . . . . . . 44-2 Issues in Data Structure Visualization Systems 44-3 Purpose and Environment Interacting with a System

44.4 Georgia Institute of Technology

44.1

44.5

Data Structure Views

•

Existing Research and Systems . . . . . . . . . . . . . . . . . . Incense

John Stasko

•

•

VIPS

•

GELO

•

DDD

•

44-6

Other Systems

Summary and Open Problems . . . . . . . . . . . . . . . . . . . 44-11

Introduction

Important advances in programming languages have occurred since the early days of assembly languages and op codes, and modern programming languages have signiﬁcantly simpliﬁed the task of writing computer programs. Unfortunately, tools for understanding programs have not achieved the accompanying levels of improvement. Software developers still face diﬃculties in understanding, analyzing, debugging, and improving code. As an example of the diﬃculties still evident, consider a developer who has just implemented a new algorithm and is now ready to examine the program’s behavior. After issuing a command to begin program execution, the developer examines output data and/or interactive behavior, attempting to ascertain if the program functioned correctly, and if not, the reasons for the program’s failure. This task can be laborious and usually requires the use of a debugger or perhaps even the addition of explicit checking code, usually through output statements. Furthermore, the process can be quite challenging and the average developer may not be that skilled in fault diagnosis and correction. It would be extremely advantageous to have a tool that allows programmers to “look inside” programs as they execute, examining the changes to data and data structures that occur over time. Such a tool also could provide helpful context by identifying the current execution line, the active program unit, and the set of activations that have occurred to reach this conﬁguration. Tools, such as the one described above, are one form of software visualization [1]. Price, Baecker, and Small describe software visualization as, “the use of the crafts of typography, graphic design, animation, and cinematography with modern human-computer interaction and computer graphics technology to facilitate both the human understanding and eﬀective use of computer software [2].” Fundamentally, software visualization seeks to take advantage of the visual perception and pattern matching skills of people to assist software development and software understanding. Human beings have very sophisticated visual perception systems that we constantly use to help us think [3]. Software visualization is a

44-1

© 2005 by Chapman & Hall/CRC

44-2

Handbook of Data Structures and Applications

subﬁeld in the larger area of information visualization [4, 5] that studies how visualizations serve as external cognition aids. Software visualization research and systems fall into two primary categories, program visualization and algorithm visualization. Program visualization systems present data about and attributes of some existing software system. Typically, program visualizations are used in a software engineering context, that is, to help design, implement, optimize, test, or debug software. Thus, program visualization systems often illustrate source code, program data, execution statistics, program analysis information, or program objects such as data structures. The imagery in program visualization systems also is usually displayed with little or no input from the user/viewer. That is, a program (source code or executable) is analyzed by the system, which then automatically produces the graphics when the user requests them. Algorithm visualization, conversely, strives to capture the abstractions and semantics of an algorithm or program primarily for pedagogical purposes. One often thinks of algorithm visualization as being more “high-level” as compared to program visualization being more “low level.” The term algorithm animation is used interchangeably for this area simply because the displays are so dynamic and algorithm operations appear to animate over time. More speciﬁcally, Brown states, “Algorithm animation displays are, essentially, dynamic displays showing a program’s fundamental operations—not merely its data or code [6].” Algorithm visualizations typically are hand-crafted, user-conceptualized views of what is “important” about a program. These types of views usually require some person, often the system developer or the program’s creator, design and implement the graphics that accompany the program. The highly abstract, artiﬁcial nature of algorithm animations makes their automatic generation exceptionally diﬃcult. This chapter focuses on one speciﬁc subarea of software visualization, the visualization of data structures. By displaying pictures of data structures, one seeks to help people better understand the characteristics and the use of those structures. How the data in computer programs are manipulated and organized by groups is a key aspect of successful programming. Understanding how elements of the data relate to other elements is a vital component in being able to comprehend and create sophisticated algorithms and programs. The word “structure” in “data structure” simply reinforces this point. A person learning a new piece of software and seeking to modify it for some added functionality will likely ask a number of diﬀerent questions. How are data elements organized? Is some kind of sequential structure used or is a more complicated organization present? Which items reference which other items? Understanding the answers to questions such as these helps a person to understand the utility and value of data structures. Providing pictures to express the relationships of data elements clearly then is one of the most useful ways to answer those questions.

44.2

Value of Data Structure Rendering

The graphical display of data structures can beneﬁt a number of diﬀerent activities, and one key role is as an aid for computer science education. It is not uncommon for students to have diﬃculty learning to understand and use non-trivial data structures such as arrays, lists, stacks, queues (Chapter 2), and trees (Chapter 3). One common problem occurs in the mapping back-and-forth between the pseudo code or programming language implementation of a structure and its conceptual model. In current educational methods, to foster understanding, the conceptual model (abstraction) is often presented in some graphical rep-

© 2005 by Chapman & Hall/CRC

Data Structure Visualization

44-3

resentation or picture—an interesting challenge is to ﬁnd a book about data structures that does not make liberal use of pictures. Systems for visualizing data structures typically provide or operate in an environment containing both the structures’ programming language implementation and their graphical display, which facilitates students making connections between the two. This allows an instructor to prepare a collection of “interesting” data structures for students to interact with and learn from. By examining the accompanying displays, students can make the connection from a structure’s abstract properties to its concrete implementation. Another activity in which data structure visualization systems can provide signiﬁcant help is program debugging. When a data structure display tool is used in conjunction with a traditional textual debugger, it allows the active data structures to be displayed and examined in some graphical format as program execution occurs and units of code are examined. When the program’s data change, the accompanying visualizations change too, reﬂecting the new program state. The graphical display of data structures adds many advantages to strict textual debugging. Because a human’s visual perception system is a highly-tuned information processing machine, the sheer amount of information that can be transmitted to the user is much greater using graphics. With a textual debugger, people usually need to issue queries variable-by-variable to discover values. One glance at a computer display showing simultaneous representations of multiple structures may convey as much information as several minutes of the “query-reply” loop in a conventional debugger. In addition to discovering data values, programmers use debuggers to access the relationships and connections between diﬀerent pieces of data. This is a particular area in which graphical display is much more beneﬁcial than textual interpreters. For example, to check the structure of a linked list in a language such as C++ or Java, a programmer must print out a list item’s values and references to other list items. By carefully examining the resulting values, the programmer can determine if the list is in the desired conﬁguration. A data structure visualization tool that could display a linked list as a series of rectangular nodes with arrows acting as the references or pointers connecting the diﬀerent nodes would tremendously simplify the programmer’s task of determining relationships among the data. Data structure visualization tools also can aid the acquisition of contextual information about the state of a debugging session. For instance, a display could show a simple persistent view of the call stack and current execution line number in addition to the data pictures. In most debuggers, a user must often make repeated explicit queries to determine this information. For these reasons and many more, data structure visualization systems remain a relatively untapped source of value to programmers. It is quite surprising that, given these beneﬁts, more attention and research have not been devoted to the area, and data structure visualization systems have yet to achieve widespread use and adoption.

44.3 44.3.1

Issues in Data Structure Visualization Systems Purpose and Environment

The software environment in which a data structure visualization system resides will inﬂuence many of the system’s capabilities. Data structure display systems usually target a speciﬁc programming language or set of languages for visualization. In particular, many systems display only strongly-typed languages, simply because one is able to infer more information concerning the structure and composition of data objects in a strongly typed language. It also is easier to “customize” a speciﬁc graphical look for the diﬀerent data

© 2005 by Chapman & Hall/CRC

44-4

Handbook of Data Structures and Applications

structure types in a strongly typed language. A weakly typed language such as an assembly language generally forces a more generic looking display of data. Clearly, the inherent characteristics of a particular programming language will also inﬂuence the language’s resulting data visualizations. We would expect the node-pointer list data depiction to be an integral part of a LISP visualization system, while imperative languages such as C or Pascal would necessitate repeated use of a ﬂexible structured, tiled image with easy to recognize and identify sub-ﬁelds. The display of graphical objects representing class instances and some form of arcs or arrows for messages (method invocations) would be important for illustrating an object-oriented language such as C++ or Java. The intended audience of a data structure visualization system also aﬀects the system’s resulting displays. For example, a system designed for use by introductory programmers would probably stress consistent, simpliﬁed data structure views. Conversely, a system targeted to advanced programmers should support sophisticated, customized displays of complex, large data objects. Such a system should also allow a viewer to quickly suppress unwanted display objects and focus on items of special interest. One common use of data structure visualization systems is in conjunction with other tools in a programming environment or an integrated development environment (IDE). For example, “attaching” a data structure visualization system to a program execution monitor allows the display of graphical data snap-shots at various points in the program’s execution. By consistently displaying imagery, a form of program data animation results, showing how a program’s data change over time. Most often, a data structure visualization system functions in conjunction with a program debugger. In this arrangement, the display system provides a graphical window onto the program, permitting a persistent view of the data as opposed to the query-based approach of a textual debugger. While a programmer navigates through her program and its data by using a debugger, a data structure visualization system can map the particular data objects of interest onto a graphical format. As discussed in the previous section, the graphical format provides many beneﬁts to typical debugging activities.

44.3.2

Data Structure Views

A primary distinguishing characteristic of a data structure visualization system is the types of data views it supports. Most systems provide a set of default views for the common data types such as integers, ﬂoats, and strings. Some systems also provide default views for more complex composite structures such as arrays, lists, and trees. Visualization systems frequently diﬀer in their ability to handle a display request for a data object of a type other than those in the default view set. Reactions to such a query may range from taking no display action to utilizing a generic view applicable to all possible data types. Some systems also provide users with the ability to tailor a special graphical view for a particular, possibly uncommon data type. The process of deﬁning these views is often tedious, however, discouraging such forms of improvisation. Speciﬁc, relatively common data views that are often handled in varying ways include pointers/references, ﬁelds within composite structures, and arrays. Pointers/references, usually represented in a line-arrow manner, present a particularly tricky display problem because they involve issues similar issues to those evident in graph layout, a known diﬃcult problem [7] (see also Chapter 46). Ideally, a view with pointers should minimize pointer overlap, edge crossings, and collisions with other display objects. Both polyline and spline display formats for pointers are common. Representing ﬁelds within a composite data structure is a diﬃcult problem because of spacing and layout concerns. Subﬁelds can be complex structures themselves, complicating

© 2005 by Chapman & Hall/CRC

Data Structure Visualization

44-5

eﬀorts to make the data structure view clear and comprehensible. Arrays present a challenging visualization problem because of the variety of displays that are possible. For instance, a simple one-dimensional array can be presented in a horizontal or vertical format. The ideal view for multi-dimensional arrays can also be a diﬃcult rendering task, particularly for arrays of dimension three or higher. The ability to display multiple views of a speciﬁc data instance is also a valuable capability of a data structure visualization system because certain display contexts may be more informative in particular situations. Allowing varying levels of view abstraction on data is another important feature. For example, consider an array of structures in the C programming language. At one level, we may wish to view the array formation globally, with each structure represented by a small rectangle. At a closer level, we may wish to view a particular array structure element in full detail, with little attention paid to the other array elements. Some data structure display systems provide visualizations for components of program execution such as program ﬂow of control and the call stack. While these components are not program data structures, their graphical visualizations can be helpful additions to a data structure display system, especially when used in conjunction with a debugger.

44.3.3

Interacting with a System

Data structure visualization systems provide many diﬀerent ways for users to interact with the system. For instance, consider the manner that users employ to actually display a particular piece of data. Systems that work in conjunction with a debugger may provide a special display command in the debugger. Other systems may utilize a specialized user interface with a particular direct manipulation protocol for invoking data display, such as choosing a menu item and supplying a variable name or graphically selecting a variable in a source code view. Visualization systems vary in the manner of interactions they provide to users as well. For instance, once data is selected for display, the corresponding image(s) must be rendered on the viewing area. One option for this rendering is to allow the viewer to position the images, usually with the mouse. This method has the advantage of giving the user explicit control, but often, such repeated positioning can become tedious. Another rendering option gives the system total placement control. This method has the advantage of requiring less viewer input, but it requires sophisticated layout algorithms to avoid poor layout decisions. Perhaps the most attractive rendering option is a combination of these two: automatic system display with subsequent user repositioning capabilities. Limits in display window viewing area force data structure visualization systems to confront sizing issues also. One simple solution to the problem of limited viewing space is to provide an inﬁnite, scrollable viewing plane. Another solution, one more closely integrated with the system, is to utilize varying display abstractions dependent upon the amount of space available to view a data object. For example, given no space limitations, an object could be rendered in its default view. With very limited space, the object could be rendered in a space-saving format such as a small rectangle. Once data has been displayed in the viewing window, the viewer should be able to interact with and control the imagery. Allowing a user to interactively move and delete images is certainly desirable. Even more beneﬁcial, however, is the capability to suppress aspects of the data that are not of interest. For instance, only a small section of an array may be “interesting,” so a visualization system could deemphasize other portions as a user dictates. Similarly, only certain sections of linked lists and trees may require attention, and only certain ﬁelds with a particular structure type may be of interest. Allowing a viewer

© 2005 by Chapman & Hall/CRC

44-6

Handbook of Data Structures and Applications

to quickly dispose of uninteresting attributes and focus on the matter at hand is a very valuable feature. If a data structure visualization system works in conjunction with a debugger, display interaction may take on a further role, that of interactive debugging itself. Graphical editing of data imagery by the viewer can be interpreted as corresponding changes to the underlying data. For example, a system may allow a viewer to enter a new data value for a variable by graphically selecting its accompanying image and overwriting the value displayed there. An even more sophisticated action is to allow a viewer to “grab” a pointer variable, usually represented by an arrow on the display, and alter its value by dragging and repositioning the arrow image in order to make the pointer reference some other object.

44.4

Existing Research and Systems

The idea of creating a system that would visualize data structures in computer programs is an old one, dating back even to the 1960’s [8]. During this long history, a number of systems for data structure visualization have been developed. Most, however, have only been research prototypes and have never been used by anyone outside the system’s creator(s). This relative lack of adoption is surprising in light of the potential beneﬁts of data structure display identiﬁed above. A quick survey of widely-used current IDEs notes that none provide anything beyond the most limited abilities to persistently display data values, or more importantly, visualize data structures. For a good overview of the aesthetic considerations and the general challenges in drawing data structures, see the article by Ding and Mateti [9]. The authors provide a rigorous survey of the diﬀerent styles of drawings used in data structure diagrams. They enumerate a set of characteristics that inﬂuence people’s perceptions of data structure illustrations, including visual complexity, regularity, symmetry, consistency, modularity, size, separation, shape, and traditional ways of drawing. Further, they develop a set of guidelines for drawing aesthetically appealing diagrams. The guidelines are based on rules, factors, and objectives, and include the ability to quantitatively assess the aesthetics of diﬀerent diagrams. Ding and Mateti note that the automatic drawing of data structure representations is diﬃcult because a diagram should be determined not only by a structure’s declaration, but also by its intended usage. Stasko and Patterson echo that thought by identifying the notion of intention content in program visualizations [10]. They note that a programmer’s intent in creating and using a data structure can signiﬁcantly inﬂuence how the structure should best be visualized. For instance, a simple array of integers may be shown as a row of rectangles with the values inside; a row of rectangles whose height is scaled to the value of each element; a round pie chart with a wedge whose percentage size of the circle corresponds to the value of that array element; or a stack with the array elements sitting on top of each other. To generate the latter two representations, some knowledge of the purpose and goal of the surrounding program code is necessary. In the remainder of this section, we present brief summaries of a few of the most noteworthy data structure visualization systems that have been developed. Each of these grew from research projects, and the ﬁnal one, DDD, has been used signiﬁcantly by outside users. In reviewing each system, we highlight its unique aspects, and we evaluate it with respect to the issues raised in the previous section.

© 2005 by Chapman & Hall/CRC

Data Structure Visualization

(a) Structure

44-7

(b) Linked list

FIGURE 44.1: Example data structure views shown in the Incense system. Pictures provided by and reprinted with permission of Brad Myers.

44.4.1

Incense

The Incense system [11] developed by Myers was one of the earliest attempts to build a relatively full-featured data structure display system. Myers stated that Incense allowed a “programmer to interactively investigate data structures in actual programs.” The system operated on a Xerox Alto personal computer and displayed data structures for the Mesa strongly typed programming language. In the system, data structures could be displayed at debug time by supplying a variable’s name; Incense examined the symbol table to determine the variable’s type. Once a variable was chosen, the user speciﬁed via the mouse a rectangular viewing area inside the active window to display the data. Incense automatically chose the appropriate view abstraction given the space requirements. Data with insuﬃcient screen space were displayed as grey boxes. The system included a large number of sophisticated default views for the language’s data types and structures, and it utilized a spline-based method for displaying pointers. Examples of views of diﬀerent types of data structures are shown in Figure 44.1. Additionally, users could deﬁne their own data views using a predeﬁned graphics library in Mesa. The diﬃculty of that process is unclear. In order to implement Incense, Myers created the concept of an artist, a collection of procedures and data that handled display, erasure, and modiﬁcation of the data being displayed. An artist had to be associated with a piece of data in the system in order to display it. To display pointers as arrows, Incense utilized layouts, special types of artists designed to locate and manage the various pointer and referent components of data. The system was designed to allow users to also edit variables’ values at run-time in the graphical presentation, but it does not appear that this feature was ever implemented. Unfortunately, the host hardware’s space and processing limitations made Incense’s performance relatively poor which likely restricted it to being a research prototype. The system

© 2005 by Chapman & Hall/CRC

44-8

Handbook of Data Structures and Applications

FIGURE 44.2: Data structure views in the VIPS system. Picture reprinted with permission c from [13], page 47, 1991 IEEE. did, however, illustrate a multitude of valuable capabilities that a data structure visualization system could oﬀer.

44.4.2

VIPS

The VIPS [13] visual debugger by Shimomura and Isoda focused on providing a ﬂexible set of views of lists in programs. The system ran on top of the DBX debugger, with VIPS and DBX communicating through pipes. For instance, when a user would issue a request to display a list, the VIPS system would send necessary messages to DBX to extract information needed for the display. In addition to views of list data structures, VIPS provided views (windows) of program text, I/O, variable displays, as well as control windows for debugger interactions. VIPS provided two main views of program lists, the whole list view and the partial list view. In the whole view, shown on the left side of Figure 44.2, list nodes were represented as small black rectangles thus allowing more than 100 nodes to be shown at once. The basic layout style used by the system was a classic binary tree node-link layout with the root at the left and the tree growing horizontally to the right. The whole list view assisted users in understanding structure. The partial list view, shown on the right-hand side of Figure 44.2, presented each node in a more magniﬁed manner, allowing the user to see the values of individual ﬁelds within the node. By dragging a rectangle around a set of nodes in the whole list view, a user could issue a command to generate a new partial list view. VIPS also allowed users to select particular pointer ﬁelds in list structures and only have the nodes connected by those pointers to be displayed. To assist debugging, VIPS also provided a highlight feature in which list structures with values that had recently changed were highlighted in order to draw the viewer’s attention. An earlier version of the system [12] provided multiple run-time views of executing Ada programs. Default data views in the system included scalars, linked lists, one-dimensional arrays and records. VIPS also allowed users to design their own data displays or “ﬁgures” by writing programs in the Figure Description Language FDL, a subset of Ada. FDL programs

© 2005 by Chapman & Hall/CRC

Data Structure Visualization

44-9

FIGURE 44.3: GELO view of a list. Picture provided courtesy of Steve Reiss. contained parameters that could be associated with a variable or variables, promoting view control via data values. Data displays were rendered automatically by the system. When space was tight, smaller representations were utilized. The VIPS debugger provided one of the most extensive graphically-aided debugging systems onto a particular language. By adding views of the call stack, data ﬂow, and program structure to program data visualizations, the system explored the boundary of visual debugging eﬀorts at that time.

44.4.3

GELO

The GELO system [14] was designed to ease the production and display of complex pictures of programs and data structures. In the system, strongly typed data structures were displayed as picture objects of types data, tile, layout, arc, and empty. GELO diﬀered from many other data structure display systems in that diagrams were not described in a world coordinate space, but by giving a set of topological constraints for their views. The system was organized as three components: GELO managed the speciﬁcation and display of classical program and data structures; APPLE allowed a user to design and customize the way that a particular data structure would appear by providing mechanisms for deﬁning the mapping between the data structure and the GELO structures (more than one mapping was allowed); PEAR used these mappings to allow the user to edit the structures’ display, thereby modifying the underlying data structures. GELO allowed users to specify both the data instances to be displayed and the drawing attributes of the display through fairly complex dialog box selections. It provided default displays for common structures such as lists and trees, as well as various heuristics for graph layout. A sample list view is shown in Figure 44.3 and a tree view is shown in Figure 44.4. GELO included view panning and zooming, abstractions on small objects, and scrollable windows. Reiss noted that the system’s topological layout scheme was sometimes overly restric-

© 2005 by Chapman & Hall/CRC

44-10

Handbook of Data Structures and Applications

FIGURE 44.4: GELO view of a tree. Picture provided courtesy of Steve Reiss.

5: list (List *) 0x804af30

*()

self

self

value = 85 next self = 0x804af30 next = 0x804af40

value = 86 next self = 0x804af40 next = 0x804af50

self value = 87 self = 0x804af50 next = 0x804af30

next

FIGURE 44.5: An example DDD representation of a linked list structure. Picture provided courtesy of Andreas Zeller. tive; users may have wanted to have a picture “look just so” but GELO did not provide this capability. The sheer amount of dialog and menu choices for designing a display also appeared to be daunting, but the sophistication of automatic layout GELO provided was quite impressive.

44.4.4

DDD

The DDD System [15, 16], developed by Zeller, provides some of the most sophisticated graphical layout capabilities ever found in a data structure display system. DDD is technically a front-end to command-line debuggers such as GDB and DBX, and it provides all the capabilities of those debuggers. Additionally, program variables can be visualized in displays, rectangular windows that can be placed on a user’s canvas. DDD’s sophistication comes in its techniques for visualizing pointer dereferencing. It draws a directed edge from one display to another to indicate the reference. DDD contains simple placement rules with edges pointing right and downward, or if desired, sophisticated graph layout algorithms can be invoked. Figure 44.5 shows an example data structure view from DDD. In the default display mode, only one edge can point to any display. Thus, it is possible to have a visualization in which a display (variable or speciﬁc piece of memory) appears multiple times. DDD also provides alias detection, however, so that all program data residing at the same location are consolidated to the same display object. Thus, lists with cycles will be shown as the circular representation that one would expect. DDD is particularly noteworthy in that the system is available as free software and it has

© 2005 by Chapman & Hall/CRC

Data Structure Visualization

44-11

been widely downloaded and utilized. It is perhaps the data structure visualization that has been most used by people other than the system creators.

44.4.5

Other Systems

In addition to the systems mentioned above, a number of other data structure display tools have been developed over the years. Some of the more noteworthy ones include • GDBX [17] - A graphical extension to the UNIX debugger DBX. • PROVIDE [18] - An ambitious process visualization and debugging environment for programs written in a subset/variant of the C programming language. • Amethyst [19] - A system intended to simplify data structure visualization for novice programmers. • DS-Viewer [20] - A system that focused on the display of structures in a weakly typed language such as an assembler language. • Lens [22] - A layer on top of the DBX debugger that provided, via programmer annotations, both data structure display capabilities as well as simple algorithm animation operations. • SWAN [21] - A system that allowed instructors and students to easily annotate programs to produce data structure views.

44.5

Summary and Open Problems

Although the systems summarized in this paper have shown the promise that data structure visualization holds, data structure display systems still are not widely used in teaching and still are not commonly included in IDEs for programmers to use. Until data structure display systems achieve more general acceptance, the area will continue to exhibit unfulﬁlled potential. Anyone who has ever programmed will surely agree that a visualization of the complex interactions of data can only help comprehension and debugging of computer programs. Now that software and hardware improvements for graphical displays have made these types of visualizations routine, hopefully, this unfulﬁlled potential will be reached. Below we describe some speciﬁc problems that remain to be solved in order to help foster the growth of data structure visualization. • User-deﬁned displays – Invariably, advanced programmers or programmers in a speciﬁc application area will want to build customized views of particular data types and structures. Existing systems have only either provided generic default displays or have required people to do tedious graphical design in order to build custom views. A powerful data structure display system should allow users to quickly and easily demonstrate a new graphical form for a data structure. Thus, a data structure display system likely must include some form of sophisticated graphical editor or toolkit to facilitate view design. • Mapping data to their display – In addition to designing new views, designers must be able to specify how data is to be interpreted to generate the views. Creating an easy-to-understand and easy-to-use mapping scheme is quite diﬃcult, particularly if multiple pieces of data can “drive” a particular view or one piece of data can be presented in diﬀerent view abstractions. • Complex, large data – With the possible exception of DDD, prior data structure display systems have been better suited for programming-in-the-small with

© 2005 by Chapman & Hall/CRC

44-12

Handbook of Data Structures and Applications relatively straightforward, moderate-sized data structures. Sophisticated display imagery becomes signiﬁcantly more diﬃcult as the complexity and sheer size of the data increases, thereby complicating screen layout issues. Further abstraction and mapping strategies are required to properly address these issues also.

References [1] J. Stasko, J. Domingue, M. Brown, and B. Price, editors. Software Visualization: Programming as a Multimedia Experience. MIT Press, Cambridge, MA, 1998, 562 pages. [2] B. Price, R. Baecker, and I. Small. An introduction to software visualization. In J. Stasko, J. Domingue, M. Brown, and B. Price, editors, Software Visualization: Programming as a Multimedia Experience, MIT Press, Cambridge, MA, 1998, 3–27. [3] C. Ware. Information Visualization: Perception for Design. Morgan Kaufman, San Francisco, 2000, 438 pages. [4] S. Card, J. Mackinlay, and B. Shneiderman, editors. Readings in Information Visualization – Using Vision to Think. Morgan Kaufmann, San Francisco, 1999, 686 pages. [5] R. Spence. Information Visualization. ACM Press, Pearson Education, Essex, England, 2001, 206 pages. [6] M. Brown. Perspectives on algorithm animation. ACM CHI, 1988, 33–38. [7] G. Di Battista, P. Eades, R. Tamassia, and I. Tollis. Graph Drawing: Algorithms for the Visualization of Graphs. Prentice Hall, Upper Saddle River, NJ, 1998, 397 pages. [8] R. Baecker. Experiments in on-line graphical debugging: The interrogation of complex data structures. Hawaii International Conference on the System Sciences, 1968, 128–129. [9] C. Ding and P. Mateti. A framework for the automated drawing of data structure diagrams. IEEE Transactions on Software Engineering, 16, 5, 1990, 543–557. [10] J. Stasko and C. Patterson. Understanding and characterizing software visualization systems. IEEE Workshop on Visual Languages, 1992, 3–10. [11] B. Myers. A system for displaying data structures. SIGGRAPH, 1983, 115–125. [12] S. Isoda, T. Shimomura, and Y. Ono. VIPS: A visual debugger. IEEE Software, 4, 3, 1987, 8–19. [13] T. Shimomura and S. Isoda. Linked-list visualization for debugging. IEEE Software, 8, 3, 1991, 44–51. [14] S. Reiss, S. Meyers, and C. Duby. Using GELO to visualize software systems. ACM UIST, 1989, 149–157. [15] A. Zeller. Visual debugging with DDD. Dr. Dobb’s Journal, 322, 2001, 21–28. [16] T. Zimmermann and A. Zeller. Visualizing memory graphs. In S. Diehl, editor, Software Visualization State-of-the-Art Survey, LNCS 2269, Springer-Verlag, 2002, 191– 204. [17] D. Baskerville. Graphic presentation of data structures in the DBX debugger. Technical Report UCB/CSD 86/260, University of California at Berkeley, 1985. [18] T. Moher. PROVIDE: A process visualization and debugging environment. IEEE Transactions on Software Engineering, 14, 6, 1988, 849–857. [19] B. Myers, R. Chandhok, and A. Sareen. Automatic data visualization for novice Pascal programmers. IEEE Workshop on Visual Languages, 1988, 192–198. [20] D. Pazel. DS-Viewer—an interactive graphical data structure presentation facility. IBM Systems Journal, 28, 2, 1989, 307–323.

© 2005 by Chapman & Hall/CRC

Data Structure Visualization

44-13

[21] C. Shaﬀer, L. Heath, J. Nielsen, and J. Yang. SWAN: A student-controllable data structure visualization system. ED-MEDIA, 1996, 632–637. [22] S. Mukherjea and J. Stasko. Toward visual debugging: Integrating algorithm animation capabilities within a source level debugger. ACM Transactions on Computer-Human Interaction, 1, 3, 1994, 215–244.

© 2005 by Chapman & Hall/CRC

45 Drawing Trees 45.1 45.2 45.3 45.4

Sebastian Leipert Center of Advanced European Studies and Research

45.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preliminaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Level Layout for Binary Trees . . . . . . . . . . . . . . . . . . . . Level Layout for n-ary Trees . . . . . . . . . . . . . . . . . . . . . .

45-1 45-3 45-4 45-6

PrePosition • Combining a Subtree and Its Left Subforest • Ancestor • Apportion • Shifting the Smaller Subtrees

45.5 45.6

Radial Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-16 HV-Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-16

Introduction

Constructing geometric representations of graphs in a readable and eﬃcient way is crucial for understanding the inherent properties of the structures in many applications. The desire to generate a layout of such representations by algorithms and not by hand meeting certain aesthetics has motivated the research area Graph Drawing. Examples of these aesthetics include minimizing the number of edge crossings, minimizing the number of edge bends, minimizing the display area of the graph, visualizing a common direction (ﬂow) in the graph, maximizing the angular resolution at the vertices, and maximizing the display of symmetries. Certainly, two aesthetic criteria cannot be simultaneously optimized in general and it depends on the data which criterion should be preferably optimized. Graph Drawing Software relies on a variety of mathematical results in graph theory, topology, geometry, as well as computer science techniques mainly in the areas algorithms and data structures, software engineering and user interfaces. A typical graph drawing problem is to create for a graph G = (V, E) a geometric representation where the nodes in V are drawn as geometric objects such as points or two dimensional shapes and edges (u, v) ∈ E are drawn as simple Jordan curves connecting the geometric objects associated with u and v. Apart from the, in the context of this book obvious, visualization of Data Structures, other application areas are, e.g., software engineering (Uniﬁed Modeling Language (UML), data ﬂow diagrams, subroutine-call graphs) databases (entity-relationship diagrams), decision support systems for project management (business process management, work ﬂow). A fundamental issue in Automatic Graph Drawing is to display trees, since trees are a common type of data structure (Chapter 3). Thus a good drawing of a tree is often a powerful intuitive guide for analyzing data structures and debugging their implementations. It is a trivial observation that a tree T = (V, E) always admits a planar drawing, that is a drawing in the plane such that no two edges cross. Thus all algorithms that have been developed construct a planar drawing of a tree. Furthermore it is noticed that for trees the

45-1

© 2005 by Chapman & Hall/CRC

45-2

Handbook of Data Structures and Applications

condition |E| = |V | − 1 holds and therefore the time complexity of the layout algorithms is always given in dependency to the number of nodes |V | of a tree. In 1979, Wetherell and Shannon [24] presented a linear time algorithm for drawing binary trees satisfying the following aesthetic requirements: the drawing is strictly upward, i.e. the y-coordinate of a node corresponds to its level, so that the hierarchical structure of the tree is displayed; the left child of a node is placed to the left of the right child, i.e., the order of the children is displayed; ﬁnally, each parent node is centered over its children. Moreover, edges are drawn straight line. Nevertheless, this algorithm showed some deﬁciencies. In 1981, Reingold and Tilford [17] improved the Wetherell-Shannon algorithm by adding the following feature: each pair of isomorphic subtrees is drawn identically up to translation, i.e., the drawing does not depend on the position of a subtree within the complete tree. They also made the algorithm symmetrical: if all orders of children in a tree are reversed, the computed drawing is the reﬂected original one. The width of the drawing is not always minimized subject to these conditions, but it is close to the minimum in general. The algorithm of Reingold and Tilford that runs in linear time, is given in Section 45.3. Figure 45.1 gives an example of a typical layout produced by Reingold and Tilford’s algorithm.

26 17

41

14

21

10

16

7 3 Nil

12 Nil

Nil

15 Nil

Nil

19 Nil

Nil

30 23

20

Nil Nil

Nil Nil

47

28 Nil

Nil

38

Nil

35

Nil Nil

Nil

39 Nil

Nil

Nil

Nil

FIGURE 45.1: A typical layout of a binary tree. The tree is a red-black tree as given in [3].

Extending this algorithm to rooted ordered trees of unbounded degree in a straightforward way produces layouts where some subtrees of the tree may get clustered on a small space, even if they could be dispersed much better. This problem was solved in 1990 by the quadratic time algorithm of Walker [23], which spaces out subtrees whenever possible. Very recently Buchheim et al. [2] showed how to improve the algorithm of Walker to linear running time. The algorithm by Buchheim et al. is given in Section 45.4, including a pseudo code that allows the reader a straightforward application of the algorithm. This algorithm for n-ary trees gives similar results on binary trees as the algorithm of Reingold and Tilford. In Section 45.5 algorithms for straight line circular drawings (see [1, 8, 9, 16]) are introduced. This type of layout proved to be useful for free trees that do not have a designated node as a root. Section 45.6 presents hv-drawings, an approach for drawing binary and n-ary trees on a grid. For binary trees, edges in an hv-drawing are drawn as rightward horizontal or downward vertical segments. This type of drawing is straight line upward orthogonal. It is, however, not strictly upward. Such drawings are e.g. investigated in [4, 5, 12–15, 20, 22]. Variations of the hv-layout algorithms have been used to obtain results on minimal area requirements of tree layouts. Shiloach and Crescenzi et al. [4, 20] showed that any rooted tree admits an upward straight-line drawing with area O(|V | log |V |). Crescenzi et al. [4]

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-3

moreover proved that there exists a class of rooted trees that require Ω(|V | log |V |) area if drawn strictly upward straight-line. In [4, 7] algorithms are given that produce O(|V |)-area strictly upward straight line drawings for some classes of balanced trees such as complete binary trees, Fibonacci trees, and AVL trees. These results have been expanded in [6] to a class of balanced trees that include k-balanced trees, red-black trees, BB[α]-trees, and (a, b)trees. Garg et al. [10] gave an O(|V | log |V |) area algorithm for ordered trees that produces upward layouts with polyline edges. Moreover they presented an upward orthogonal (not necessarily straight line) algorithm with an asymptotically optimal area of O(|V | log log |V |). Shin et al. [21] showed that bounded degree trees admit upward straight line layouts with an O(|V | log log |V |) area. The result can be modiﬁed to derive an algorithm that gives an upward polyline grid drawing with an O(|V | log log |V |) area, at most one bend per edge, and O(|V |/ log |V |) bends in total. Moreover in [21] an O(|V | log log |V |) area algorithm has been presented for non upward straight line grid layouts with arbitrary aspect ratio. Recently, Garg and Rusu [11] improved this result giving for binary trees an O(|V |) area algorithm for non upward straight line orthogonal layouts with a pre speciﬁed aspect ratio in the range of [1, |V |α ], with α ∈ [0, 1) that can be constructed in O(|V |).

45.2

Preliminaries

A (rooted) tree T is a directed acyclic graph with a single source, called the root of the tree, such that there is a unique directed path from the root to any other node. The level l(v) of a node v is the length of this path. The largest level of any node in T is the height h(T ) of T . For each edge (v, w), v is the parent of w and w is a child of v. Children of the same node are called siblings. Each node w on the path from the root to a node v is called an ancestor of v, while v is called a descendant of w. A node that has no children is a leaf. If v1 and v2 are two nodes such that v1 is not an ancestor of v2 and vice versa, the greatest distinct ancestors of v1 and v2 are deﬁned as the unique ancestors w1 and w2 of v1 and v2 , respectively, such that w1 and w2 are siblings. Each node v of a rooted tree T induces a unique subtree T (v) of T with root v. Binary trees are trees with a maximum number of two children per node. In contrast to binary trees, trees that have an arbitrary number of children are called n-ary trees. A tree is said to be ordered if for every node the order of its children is ﬁxed. The ﬁrst (last) child according to this order is called the leftmost (rightmost) child. The left (right) sibling of a node v is its predecessor (successor) in the list of children of the parent of v. The leftmost (rightmost) descendant of v on a level l is the leftmost (rightmost) node on the level l belonging to the subtree T (v) induced by v. Finally, if w1 is the left sibling of w2 , v1 is the rightmost descendant of w1 on some level l, and v2 is the leftmost descendant of w2 on the same level l, the node v1 is called the left neighbor of v2 and v2 is the right neighbor of v1 . To draw a tree into the plane means to assign x- and y-coordinates to its nodes and to represent each edge (v, w) by a straight line connecting the points corresponding to v and w. Objects that represent the nodes are centered above the point corresponding to the node. The computation of the coordinates must respect the sizes of the objects. For simplicity however, we assume throughout this paper that all nodes have the same dimensions and that the minimal distance required between neighbors is the same for each pair of neighbors. Both restrictions can be relaxed easily, since we will always compare a single pair of neighbors. Reingold and Tilford have deﬁned the following aesthetic properties for drawings of trees: (A1) The layout displays the hierarchical structure of the tree, i.e., the y-coordinate

© 2005 by Chapman & Hall/CRC

45-4

Handbook of Data Structures and Applications

of a node is given by its level. (A2) A parent is centered above its children. (A3) The drawing of a subtree does not depend on its position in the tree, i.e., isomorphic subtrees are drawn identically up to translation. By their appearance, these drawings are called level drawings. If the tree that has to be drawn is ordered, we additionally require the following: (A4) The order of the children of a node is displayed in the drawing, thus a left child is placed to the left with a smaller x-coordinate and a right child is placed to the right with a bigger x-coordinate. (A5) A tree and its mirror image are drawn identically up to reﬂection. Here, the reﬂection of an ordered tree is the tree with reversed order of children for each parent node. It is desirable to ﬁnd a layout satisfying (A1) to (A5) with a small width. However, it has been shown by Supovit and Reingold [18] that achieving the minimum grid width is NP-hard. Moreover, there is no polynomial time algorithm for achieving a width that is smaller than 25 24 time the minimum width, unless P = NP. If on the other hand continuous coordinates instead of integral coordinates are allowed, minimum width drawing can be found in linear time by applying linear programming techniques (see [18]).

45.3

Level Layout for Binary Trees

For ordered binary trees, the ﬁrst linear time algorithm satisfying (A1) to (A5) was presented by Reingold and Tilford [17]. The algorithm follows the divide and conquer principle implemented in form of a postorder traversal of a tree T = (V, E) and places the nodes on grid units. For each v ∈ V with left and right child wleft , wright the algorithm computes layouts for the trees T (wleft ) and T (wright ) up to horizontal translation. When v is visited, the drawing of the right subtree T (wright ) is shifted to the right such that on every level l of the subtrees the rightmost node vleft of T (wleft ) and its neighbor, the leftmost node vright of T (wright ) are separated at least by two or three grid points. The separation value between vleft and vright is chosen such that v can be centered above the roots of T (wleft ) and T (wright ) at an integer grid coordinate. Shifting T (wright ) is partitioned into two subtask: ﬁrst, determining the amount of shift and second, performing the shift of the subtree. To determine the amount of shift, deﬁne the left contour of a tree T to be the vertices with minimum x-coordinate at each level in the tree. The right contour is deﬁned analogously. For an illustration, see Figure 45.2, where nodes belonging to the contours are shaded. To place T (wright ) as close to T (wleft ) as possible, the right contour of T (wleft ) and the left contour of T (wright ) are traversed calculating for every level l the amount of shift to separate the two subtrees on that speciﬁc level l. The maximum over all shift then gives the displacement for the trees such that they do not overlap. Since each node belongs to the traversed part of the left contour of the right subtree at most for one subtree combination, the total number of such comparisons is linear for the complete tree. In order to achieve linear running time it must be ensured that the contours are traversed without traversing (too many) nodes not belonging to the contours. This is achieved by introducing a thread for each leaf of the subtree that has a successor in the same contour. The thread is a pointer to this successor. See Figure 45.2 for an illustration where the threads are represented by dotted arrows. For every node of the contour, we now have a pointer to its successor in the left (right) contour given either by its leftmost (rightmost)

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-5

t

FIGURE 45.2: Combining two subtrees and adding a new thread t. child or by the thread. Finally, to update the threads, a new thread has to be added whenever two subtrees of diﬀerent height are combined. Once the shift has been determined for T (wright ) we omit shifting the subtree by updating the coordinates of its nodes, since this would result in quadratic running time. Instead, the position of each node is only determined preliminary and the shift for T (wright ) is stored at wright as the modiﬁer mod (wright ) (see [24]). Only mod (wright ) and the preliminary xcoordinate prelim(v) of the parent v are adjusted by the shift of T (wright ). The modiﬁer of wright is interpreted as a value to be added to all preliminary x-coordinates in the subtree rooted at wright , except for wright itself. Thus, the coordinates of a node v in T in the ﬁnal layout is its preliminary position plus the aggregated modiﬁer modsum(v) given by the sum of all modiﬁers on the path from the parent of v to the root. Once all preliminary positions and modiﬁers have been determined the ﬁnal coordinates can be easily computed by a top-down sweep. THEOREM 45.1 [Reingold and Tilford [17]] The layout algorithm for binary trees meets the aesthetic requirements (A1)–(A5) and can be implemented such that the running time is O(|V |).

By construction of the algorithm it is obvious that the algorithm meets (A1)–(A5). So it is left to show that the running time is linear in the number of nodes. Every node of T is traversed once during the postorder and the preorder traversal. So it is left to show that the time needed to traverse the contour of the two subtrees T (wleft ) and T (wright ) for every node v with children wleft and wright is linear in the number of nodes of T over all such traversals. It is obviously necessary to travel down the contours of T (wleft ) and T (wright ) only as far as the tree with lesser height. Thus the time spent processing a vertex v in the postorder traversal is proportional to the minimum of the height of h(T (wleft )) and h(T (wright )). The running time of the postorder traversal is then given by: (1 + min{h(T (wleft )), h(T (wright ))}) = |V | + min{h(T (wleft )), h(T (wright ))} Proof

v∈T

v∈T

The sum v∈T min{h(T (wleft )), h(T (wright ))} can be estimated as follows. Consider a node w that is part of a contour of a subtree T (wleft ). When comparing the right contour of T (wleft ) and the left contour of T (wright ) two cases are possible. Either w is not traversed and therefore will be part of the contour of T (v) or it is traversed when comparing T (wleft ) and T (wright ). In the latter case, w is part of the right contour of T (wleft ) and after merging T (wleft ) and T (wright ) the node w is not part of the right contour of T (v). Thus every node

© 2005 by Chapman & Hall/CRC

45-6

Handbook of Data Structures and Applications

(a)

(b)

(c)

(d)

FIGURE 45.3: Extending the Reingold-Tilford algorithm to trees of unbounded degree. of T is traversed at most twice and the total number of comparisons is bounded by |V |. We do not give the full algorithm for drawing binary trees here. Instead, the layout algorithm for n-ary trees is given in full length in the next section. The methods presented there are an expansion of Reingold and Tilfords algorithm to the more general case and still proceed for binary trees as described in this section.

45.4

Level Layout for n-ary Trees

A straightforward manner to draw trees of unbounded degree is to adjust the ReingoldTilford algorithm by traversing the children of each node v from left to right, successively computing the preliminary coordinates and the modiﬁers. This however violates property (A5): the subtrees are placed as close to each other as possible and small subtrees between larger ones are piled to the left; see Figure 45.3(a). A simple trick to avoid this eﬀect is to add an analogous second traversal from right to left; see Figure 45.3(b), and to take average positions after that. This algorithm satisﬁes (A1) to (A5), but smaller subtrees are usually clustered then; see Figure 45.3(c). To obtain a layout where smaller subtrees are spaced out evenly between larger subtrees as for example shown in Figure 45.3(d), we process the subtrees for each node v ∈ V from left to right, see Figure 45.4. In a ﬁrst step, every subtree is then placed as close as possible to the right of its left subtrees. This is done similarly to the algorithm for binary trees as described in Section 45.3 by traversing the left contour of the right subtree T (wright ) and the right contour of the subforest induced by the left siblings of wright . Whenever two conﬂicting neighbors vleft and vright are detected, forcing vright to be shifted to the right by an amount of σ, we apply an appropriate shift to all smaller subtrees between the subtrees containing vleft and vright . More precisely, let wleft and wright be the greatest distinct ancestors of vleft and vright . Notice that both wleft and wright are children of the node v that is currently processed. Let k be the number of children w1 , w2 , . . . , wk of the current root between wleft and wright + 1. The subtrees between wleft and wright are spaced out by shifting the subtree T (wi ) to the

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-7

FIGURE 45.4: Spacing out the smaller subtrees. right of wleft by an amount of i·σ/k, for i = 1, 2, . . . , k. We notice that spacing out the smaller subtrees may result in subtrees that are shifted more than once. Below, the eﬀect on the running time for computing the shifts is determined and it is shown how to obtain a linear time implementation. It is easy to see that this approach satisﬁes (A1)–(A5) and in addition spaces out the smaller subtrees between larger subtrees evenly. In contrast to the algorithm for binary trees (see Section 45.3) nodes are not placed on integer coordinates. Instead real values are used. Figure 45.5 gives a layout example of a 5-ary tree. The layout algorithm considers diﬀerent nodes sizes. Figure 45.6 shows a layout of a P Q-tree produced by the algorithm for binary trees. A straightforward modiﬁcation of the algorithm allows the application of diﬀerent nodes sizes to the Q-nodes and the usage of strictly vertical edges for the children of the Q-nodes. The algorithm TreeLayout given below works as a frame that initializes modiﬁers, threads, and ancestors (see Section 45.4.3), before evoking the methods PrePosition and Adjust. The method PrePosition computes the shifts and preliminary positions of the nodes. forall nodes v of T do mod (v) = thread (v) = 0; ancestor (v) = v; od let r be the root of T ; PrePosition(r); Adjust(r, −prelim(r)); Algorithm 1: TreeLayout(T )

Based on the results of the function PrePosition the function Adjust given in Algorithm 2 computes the ﬁnal coordinates by summing up the modiﬁers recursively.

45.4.1

PrePosition

Algorithm 3 presents the method PrePosition(v) that computes a preliminary x-coordinate for a node v. PrePosition is applied recursively to the children of v. After each call

© 2005 by Chapman & Hall/CRC

45-8

Handbook of Data Structures and Applications BusinessEn

tity

-name : string -description : StringI18N -businessKey : string -operator : s tring -authorizedName : string

BusinessServi

ce

-name : string -description : StringI18N -serviceKey : string

BindingTemp

Discov eryURL Categor yBag

Identifie rBag

Contact (from cont act)

late «XSDsim pleType» uriReferen ce

-description : StringI18N -bindingKey : string

TModelInstanceIn fo

«XSDcho ice» choic e_1

HostingRedir

ector

-bindingKey : String

-description : StringI18N

TModel

InstanceDeta ils

AccesPoint

-tModelKey : string -name : string -description : string

-description : StringI18N -instanceParms : u riReference

-U RLType

Overview Doc «XSDsim pleType» N MTOKEN

«XSDsim pleType» stri ng

«enumeration» URL Type -mailto -http -https -ftp -f ax -phone -other

-description : StringI18N -overviewURL : ur iReference

Strin gI18N

KeyedReference

TModelB ag

-tModelKey : string -keyNam e : string -keyValue : string

«XSDtopLevelAt tribute» lang (from XML Attributes)

Identifie rBag

-tModelKey : String

Categor yBag

FIGURE 45.5: A level layout of an n-ary tree with diﬀerent node sizes. P

Q-node 1

36

P

27

26

Q-node 4

Q-node 2

10

P

37

Q-node 3

P

18

34

15

28

P

13

40

16

P

P

21

32

43

25

P

2

P

38

41

42

19

24

FIGURE 45.6: A level layout of a P Q-tree. x(v) = prelim(v) + m; let y(v) be the level of v; forall children w of v do Adjust(w, m + mod (v)); od Algorithm 2: Adjust(v, m) of PrePosition on a child w a function Apportion is executed on w. The procedure Apportion is the core of the algorithm and shifts a subtree such that it does not conﬂict with its left subforest. After spacing out the smaller subtrees by calling ExecuteShifts,

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-9

the node v is placed to the midpoint of its outermost children. The value distance prescribes the minimal distance between two nodes. If objects of diﬀerent size are considered for the representation of the nodes, or if diﬀerent minimal distances, i.e. between subtrees, are speciﬁed, the value distance has to be modiﬁed appropriately. if v is a leaf then prelim(v) = 0; if v has a left sibling w prelim(v) = prelim(w) + distance; else let defaultAncestor be the leftmost child of v; forall children w of v from left to right do PrePosition(w); Apportion(w,defaultAncestor ); od ExecuteShifts(v); midpoint = 12 (prelim(leftmost child of v) + prelim(rightmost child of v)); if v has a left sibling w then prelim(v) = prelim(w) + distance; mod (v) = prelim(v) − midpoint ; else prelim(v) = midpoint ; end end Algorithm 3: PrePosition(v)

45.4.2

Combining a Subtree and Its Left Subforest

Before presenting Apportion in detail, we need to consider eﬃcient strategies for the diﬀerent tasks that are performed by this function. Similar to the threads used for binary trees (see Sect. 45.3), Apportion uses threads to follow the contours of the right subtree and the left subforest. The fact that the left subforest is no tree in general does not create any additional diﬃculty. One major task of Apportion is that it has to space out the smaller subtrees between the larger ones. More precisely, if Apportion shifts a subtree to the right to avoid a conﬂict with its left subforest, Apportion has to make sure that the shifts of the smaller subtrees of the left subforest are determined. A straightforward implementation computes the shifts for the intermediate smaller subtrees after the right subtree has been moved. However, as has been shown in [2], this strategy has an aggregated runtime of Ω(|V |3/2 ). To prove this consider a tree T k such that the root has k children v1 , v2 , . . . , vk (see Figure 45.7 for k = 3). The children are numbered from left to right. Except for v1 let the i-th child vi be the root of a subtree T k (vi ) that consist of a chain of i nodes. Between each pair vi , vi+1 , i = 1, 2, . . . , k − 1, of these children, add k children as leaves. Moreover, the subtree T k (v1 ) is modiﬁed as follows. Its root v1 has 2k + 5 children, and up to level k − 1, every rightmost child of the 2k + 5 children again

© 2005 by Chapman & Hall/CRC

45-10

Handbook of Data Structures and Applications

FIGURE 45.7: T 3 . has 2k + 5 children. The number of nodes of T k is 1+

k

i + (k − 1)k + (k − 1)(2k + 5) ∈ Θ(k 2 ) .

i=1

When traversing the nodes v1 , v2 , . . . , vk in order to determine their shifts, the subtree chain T k (vi ) conﬂicts with the ﬁrst subtree T k (v1 ) on level i. Hence, all (i − 1)(k + 1) − 1 smaller subtrees between T k (v1 ) and T k (vi ) are shifted. Thus, the total number of shifting steps is k

((i − 1)(k + 1) − 1) = (k + 1)k(k − 1)/2 − k + 1 ∈ Θ(k 3 ) .

i=2

Since the number of nodes in Tk is |V | ∈ Θ(k 2 ), this shows that a straightforward implementation needs Ω(|V |3/2 ) time in total. Let T (vi ), i ∈ {2, 3, . . . , k} be the subtree that has to be shifted. Let vleft and vright be two neighboring nodes on some level l such that • vleft is in the left subforest ∪i−1 h=1 T (vh ) and vright is in T (vi ) respectively, and • vleft and vright determine the shift of T (vi ). In order to develop an eﬃcient method for spacing out the smaller subtrees two tasks have to be solved. • The tree T (vj ), j ∈ {1, 2, . . . , i − 1}, with vleft ∈ T (vj ) has to be maintained in order to determine the smaller subtrees to the left of T (vi ) that have to be spaced out. • Shifting the smaller subtrees between T (vj ) and T (vi ) has to be done eﬃciently. The next Section 45.4.3 shows how to obtain the tree T (vj ) eﬃciently. Section 45.4.4 gives a detailed description on how to compute the shift of T (vi ) and Section 45.4.5 presents a method that spaces out smaller subtrees.

45.4.3

Ancestor

We ﬁrst describe how to obtain the subtree T (vj ) that contains the node vleft . The problem is equivalent to ﬁnding the greatest distinct ancestors wleft and wright of the nodes vleft and vright , where in this case wleft is equal to the root vj of the subtree that we need to determine and wright = vi . It is possible to apply an algorithm by Schieber and Vishkin [19] that determines for each pair of nodes its greatest distinct ancestors in constant time, after an O(|V |) preprocessing step. Since their algorithm is somewhat tricky, and one of the greatest distinct ancestors, namely vi , is known anyway, we apply a much simpler algorithm. Furthermore, as vright is always the right neighbor of vleft , the left one of the greatest distinct ancestors only depends on vleft . Thus we may shortly call it the ancestor of vleft in the following.

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-11

(a)

(b)

(c)

FIGURE 45.8: Adjusting ancestor pointers when adding new subtrees: the pointer ancestor (u) is represented by a solid arrow if it is up to date and by a dashed arrow if it has expired. In the latter case, the defaultAncestor is used and drawn black. When adding a small subtree, all ancestor pointers ancestor (u) of its right contour are updated. When adding a large subtree, only defaultAncestor is updated.

To store the ancestor of a node u a pointer ancestor (u) is introduced and initialized to u itself. The pointer ancestor (u) for any node u is not updated throughout the algorithm. Instead, a defaultAncestor is used and ancestors are only determined for the nodes u on the right contour of the left subforest ∪i−1 h=1 T (vh ) during the shift of the subtree T (vi ). This strategy ensures that we obtain linear running time. We make sure that for every i = 2, 3, . . . , k the following property for all nodes u on the right contour of ∪i−1 h=1 T (vh ) holds: (*) If ancestor (u) is up to date, i.e., u is a child of v, then ancestor (u) = wleft ; otherwise, defaultAncestor is the correct ancestor (u). For i = 2 we have that ∪i−1 h=1 T (vh ) = T (v1 ). The defaultAncestor for all nodes on the right contour is obviously v1 and therefore defaultAncestor is set equal to v1 . It is easy to recognize if a node u on the right contour has a pointer ancestor (u) that is up to date: either ancestor (u)= v1 , or the level l(ancestor (u)) is greater than l(v1 ). This obviously fulﬁlls property (*), see Figure 45.8(a) for an illustration. After adding a subtree T (vi−1 ) to ∪i−2 h=1 T (vh ) for each i = 3, 4, . . . , k two cases need to be considered. If the height h(T (vi−1 )) is lesser or equal to the height of the subforest ∪i−2 h=1 T (vh ), the pointer ancestor (u) is set to vi−1 for all nodes u on the right contour of T (vi−1 ). This obviously fulﬁlls property (*); see Figure 45.8(b) for an illustration. Moreover, the number of update operations is equal to the number of comparisons between the nodes on the left contour of T (vi−1 ) and their neighbors in ∪i−2 h=1 T (vh ). Hence the total number of all these update operations is in O(|V |). If the height h(T (vi−1 )) is greater than the height of ∪i−2 h=1 T (vh ), we omit updating all nodes on the right contour of T (vi−1 ) in order to obtain linear running time. Instead, it suﬃces to set defaultAncestor to vi−1 , since either ancestor (u)= vi−1 , or l(ancestor (u)) > l(v1 ) holds for any node in the right contour, and all smaller subtrees in the ∪i−1 h=1 T (vh ) do not contribute to the right contour anymore. Thus property (*) is fulﬁlled; see Figure 45.8(c) for an illustration. In algorithm 4 the function Ancestor is given. It returns wleft of u as described above.

© 2005 by Chapman & Hall/CRC

45-12

Handbook of Data Structures and Applications

if ancestor(u) is a sibling of wright then return ancestor (wright ); else return defaultAncestor ; end Algorithm 4: Ancestor(u,wright ,defaultAncestor )

45.4.4

Apportion

To give the function Apportion in Algorithm 5 a more readable annotation, we use subscripts f and o to describe the diﬀerent contours of the left subforest and the right subtree. The subscript f is used for neighboring nodes on the contours that are facing each other and thus is used for the nodes on the right contour of the left subforest ∪i−1 h=1 T (vh ) and the left contour of the right subtree T (vi ), i = 2, 3, . . . , k. We use o for the left contour of ∪i−1 h=1 T (vh ) and for the right contour of T (vi ), describing the nodes that are on the outside of the combined subforest ∪ih=1 T (vh ). f f o o The nodes traversing the contours are vright , vleft , vleft , and vright , where the subscript left describes nodes of the left subforest and right nodes of the right subtree. For summing up the modiﬁers along the contour (see also Sect. 45.3), respective variables sfright , sfleft , soleft , and soright are used. Whenever two nodes of the facing contours conﬂict, we compute the left one of the greatest distinct ancestors using the function Ancestor and call MoveSubtree to shift the subtree and prepare the shifts of smaller subtrees. Finally, a new thread is added (if necessary) as explained in Section 45.3. Observe that o we have to adjust ancestor (vright ) or defaultAncestor to keep property (*). The functions NextLeft and NextRight return the next node on the left and right contour, respectively (see Algorithms 6 and 7).

45.4.5

Shifting the Smaller Subtrees

For spacing out the smaller subtrees evenly, the number of the smaller subtrees between the larger ones has to be maintained. Since simply counting the number of smaller children between two larger subtrees T (vj ) and T (vi ), 1 ≤ j < i ≤ k would result in Ω(n3/2 ) time in total, it is determined as follows. The children of v are numbered consecutively. Once the pair of nodes vleft , vright that deﬁnes the maximum shift on T (vi ) has been determined, the greatest distinct ancestors wleft = vj and wright = vi are easily determined by the approach described in Section 45.4.3. The number i − j − 1 gives the number of in between subtrees in constant time. In order to obtain a linear runtime, we make sure that each smaller subtree between a pair of larger ones is shifted at most once. Thus whenever a subtree of T (vi ) is considered to be placed next to the left subforest ∪i−1 h=1 T (vh ), we do not modify the shift of the smaller subtrees. Such an approach would result in quadratic runtime by the fact that smaller subtrees are shifted every time they are in between a pair of greater subtrees. Instead, a system is installed, that allows to adopt the shift of the smaller subtrees by traversing the nodes v1 , v2 , . . . , vk once after the last child vk of v has been shifted. For every node vg , g = 1, 2, . . . , k, real numbers shift (vg ) and change(vg ) are introduced and initialized by zero. Let T (vj ), 1 ≤ j < i ≤ k, be the subtree that deﬁnes the σ on the subtree T (vi ). Let θ = i − j be the number of subtrees between vi and vj , plus 1. Then, for t = 1, 2, . . . , i − j − 1, the t-th subtree T (vj+t ) has to be moved by t·σ/θ. In other words:

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-13

if v has a left sibling w then f o vright = vright = v; f = w; vleft f o ; let vleft be the leftmost sibling of vright f ); sfright = mod (vright o o sright = mod (vright ); f f sleft = mod (vleft ); o soleft = mod (vleft ); f f ) = 0 and NextLeft(vright ) = 0 do while NextRight(vleft f f = NextRight(vleft ); vleft f f = NextLeft(vright ); vright o o vleft = NextLeft(vleft ); o o vright = NextRight(vright ); o ancestor (vright ) = v; f f ) + sfleft ) − (prelim(vright ) + sfright ) + distance; σ = (prelim(vleft if σ > 0 then f MoveSubtree(Ancestor(vleft ,v,defaultAncestor ),v,σ);

sfright = sfright + σ; soright = soright + σ; end f sfleft = sfleft + mod (vleft ); f ); sfright = sfright + mod (vright o o o sleft = sleft + mod (vleft ); o soright = soright + mod (vright ); end

end f o if NextRight(vleft ) = 0 and NextRight(vright ) = 0 then f o ) = NextRight(vleft ); thread (vright o o ) = mod (vright ) + sfleft − soright ; mod (vright end f o if NextLeft(vright ) = 0 and NextLeft(vleft ) = 0 then f o thread (vleft ) = NextLeft(vright ); o o ) = mod (vleft ) + sfright − soleft ; mod (vleft defaultAncestor = v; end

Algorithm 5: Apportion(v,defaultAncestor )

if v has a child then return the leftmost child of v; else return thread (v); end Algorithm 6: NextLeft(v)

© 2005 by Chapman & Hall/CRC

45-14

Handbook of Data Structures and Applications

if v has a child then return the rightmost child of v; else return thread (v); end Algorithm 7: NextRight(v)

0

0

0

1 3

0

0

1

0

0

0

0

0

0

1

0

0

0

1 3

0

0

[− 13 ]

0

[− 13 ] 0

0

0

[ 13 + 15 ] 0

0

0

1

0

[− 13 ] 0

1 [− 15 ]

FIGURE 45.9: Aggregating the shifts: the top number at every node u indicates the value of shift (u), and the bottom number indicates the value of change(u). Example by [2]. the tree T (vj+t ) is shifted by σ−(i − (j + t))·σ/θ, e.g. • for t = i − j − 1 the subtree T (vi−1 ) is shifted by σ−σ/θ, • for t = i − j − 2 the subtree T (vi−2 ) is shifted by σ−2·σ/θ, • and for t = 1 the subtree T (vj+1 ) is shifted by σ−(i − j − 1)·σ/θ. The shift of the subtrees T (vj+t ), t = 1, 2, . . . , i − j − 1, depends on the shift of T (vi ) and if traversed from right to left, is decreased linear by σ/θ. Since the decrease σ/θ is linear for every pair of greater subtrees, we use a trick and aggregate the amount of shift for the intermediate smaller subtrees by storing σ in an array shift () of size k and by storing the σ/θ in an array change() of size k. The values for shifting the subtrees T (vj+t ), t = 1, 2, . . . , i − j − 1, are then stored at vi and vj : 1. the value shift (vi ) is increased by σ 2. the value change(vi ) is decreased by σ/θ 3. the value change(vj ) is increased by σ/θ Figure 45.9 shows an example on setting the values of shift () and change(). By construction of the arrays shift () and change() we then obtain the shift of T (vg ), g = 1, 2, . . . , k, (including the “original” shift of the subtree T (vi )) as follows. The children vg , g = k, k − 1, . . . , 1, are traversed from right to left. Two real values σ and change are maintained to store the shifts and the decreases of shift per subtree, respectively. These values are initialized with zero. When visiting child vg , g ∈ {k, k−1, . . . , 1} the subtree T (vg ) is shifted to the right by σ (i.e., we increase prelim(vg ) and mod (vg ) by σ). Furthermore, change is increased by change(vg ), and σ is increased by shift (vg ) and by change(vg ) and we continue with vg−1 .

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-15 0

0

0

1

0

1

[ 13 + 15 ]

0

0

[− 13 ]

0

[− 15 ]

0

[ 15 + 13 ]

[ 25 + 23 ]

3 5

4 5

0

0

[− 15 − 13 ] [− 15 − 13 ] [− 15 − 13 ][− 15 ]

[− 15 ]

FIGURE 45.10: Executing the shifts: the third and the fourth line of numbers at a node u indicate the values of σ and change before shifting u, respectively. It is easy to see that this algorithm shifts each subtree by the correct amount, see Figure 45.10 for an example. The function MoveSubtree(wleft ,wright ,σ) given in algorithm 8 performs an update of the arrays shift () and change(). We recall that wleft and wright are the greatest distinct ancestors of vleft and vright and correspond to children vi and vj , 1 ≤ i < j ≤ k, respectively. MoveSubtree shifts the subtree T (wright ) by increasing prelim(wright ) and mod (wright ) by the amount of σ. The shifts of the intermediate smaller subtrees between T (wleft ) and T (wright ) are prepared by adjust change(wright ), shift (wright ), and change(wleft ). θ = number (wright ) − number (wleft ); change(wright ) = change(wright ) − σ / θ; shift (wright ) = shift (wright ) + σ; change(wleft ) = change(wleft ) + σ / θ; prelim(wright ) = prelim(wright ) + σ; mod (wright ) = mod (wright ) + σ; Algorithm 8: MoveSubtree(wleft ,wright ,σ)

The function ExecuteShifts(v) traverses its children from right to left and determines the total shift of the children based on the arrays shift () and change(). THEOREM 45.2 [Buchheim et al. [2]] The layout algorithm for n-ary trees meets the aesthetic requirements (A1)–(A5), spaces out smaller subtrees evenly, and can be implemented to run in O(|V |). Proof By construction of the algorithm it is obvious that the algorithm meets (A1)–(A5) and spaces out the smaller subtrees evenly. So it is left to show that the running time is linear in the number of nodes. Every node of T is traversed once during the traversals PrePosition and Adjust.

© 2005 by Chapman & Hall/CRC

45-16

Handbook of Data Structures and Applications

σ= 0; change = 0; forall children w of v from right to left do prelim(w) = prelim(w) + σ; mod (w) = mod (w) + σ; change = change + change(w); σ = σ + shift (w) + change; od Algorithm 9: ExecuteShifts Similar reasoning as in the proof of theorem 45.1 for binary trees shows that the time needed to traverse the left contour of the subtree T (vi ) and the right contour of subforest ∪i−1 h=1 T (vh ), i = 2, 3, . . . , k for every node v with children vi , i = 1, 2, . . . , k is linear in the number of nodes of T over all such traversals. Moreover, we have that by construction the number of extra operations for spacing out the smaller subtrees is linear in |V | plus the number of nodes traversed in the contours. This proves the theorem.

45.5

Radial Layout

A radial layout of a tree is a variation of a level drawing, where the levels are concentric circles c1 , c2 , . . . , ch(T ) around the root placed at the origin c0 . Figure 45.11 shows an example of a radial layout. The radius of a circle ci , i = 1, 2, . . . , h(T ), is given by an increasing function r(i). This type of layout is frequently used for representing a free tree. A free tree is a tree without a speciﬁc root. To layout a free tree, a node is chosen as a ﬁctitious root that minimizes the height of the resulting subtrees. A straightforward manner to obtain a radial layout of a tree is to modify the algorithms for level drawings as presented in Sections 45.3 and 45.4. To guarantee that the resulting drawing is planar, the subtree T (v) of each node v is drawn within an annulus wedge w(v). In order to permit edges with endpoints in w(v) to extend outside w(v) and thus to conﬂict with other edges, the nodes in the subtree T (v) are placed within a convex subset s(v) of w(v). Given the level l(v), the node v is placed on cl(v) . Suppose that the tangent to cl(v) through v meets the points a and b on cl(v)+1 . Then s(v) is chosen to be the unbounded region that is given by the line segment ab and the rays from the root of T and the node a and b. The children vj , j = 1, 2, . . . , k of v are then arranged on cl(v)+1 within s(v) according to the number of leaves in T (vj ). If the distance between consecutive circles ci , ci+1 i = 0, 1, . . . , h(T ) − 1, is equal, it can be easily shown that the area occupied by the layout is in O(h(T )2 max{k | k number of children of v}) . v∈T

Diﬀerent algorithms for the radial layout of trees have been presented by [1, 8, 9] depending on the choice of the root, the radii of the circles and the angle of the annulus wedge. Symmetry oriented algorithms have also been developed, see e.g. [16].

45.6

HV-Layout

An hv-layout of a binary tree is an upward (but not strictly upward) straight line orthogonal drawing with edges drawn as rightward horizontal or downward vertical segments. The ”hv”

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-17

FIGURE 45.11: A radial layout of a binary tree. stands for horizontal-vertical. For any vertex v in a binary tree T we either have: 1. A child of v is either • aligned horizontally with v and to the right of v or • vertically aligned below v. 2. The smallest rectangles that cover the area of the subtrees of the children of v in the layout do not intersect. Figure 45.12 shows an example of a hv-layout

FIGURE 45.12: A hv-layout of a binary tree.

A hv-layout is generated by applying a dived and conquer approach. The divide step constructs the hv-layout of the left and the right subtrees, while the conquer step either performs a horizontal or a vertical combination. Figure 45.13 shows the two types of combination. If the left subtree a node v is placed to the left in a horizontal combination and below in a vertical combination, the layout preserves the ordering of the children of v. The height and width of such a drawing is at most |V | − 1. A straightforward way to reduce the size of a hv-drawing to a height of at most log |V | is to use only horizontal combinations and to place the larger subtree (in terms of number of nodes) to the right of the smaller subtree. This right heavy hv layout is not order preserving and can be produced in O(|V |) requiring

© 2005 by Chapman & Hall/CRC

45-18

Handbook of Data Structures and Applications

(a)

(b)

FIGURE 45.13: A horizontal combination (a) and a vertical combination (b). only an area of O(|V | log |V |). The right heavy hv approach can be easily extended to draw n-ary trees as sketched in Figure 45.14.

FIGURE 45.14: A hv-layout of a n-ary tree.

As already presented in the introduction, this type of layout has been extensively studied e.g. in [4–7, 10, 12–15, 20–22] to obtain results on minimal area requirements of tree layouts. Recently Garg and Ruse [11] showed by ﬂipping the subtrees rooted at a node v horizontally or vertically, it is possible to obtain tree layouts for binary trees with an O(|V |) area and with a pre speciﬁed aspect ratio in the range of [1, |V |α ], with α ∈ [0, 1). These layouts are non upward straight line orthogonal layouts.

Acknowledgment I gratefully acknowledge the contributions of Christoph Buchheim, who provided some of the ﬁgures and the implementation from our paper [2] and Merijam Percan for her careful proofreading.

References [1] M. Bernard. On the automated drawing of graphs. In 3rd Caribbean Conference on Combinatorics and Computing, pages 43–55, 1981. [2] C. Buchheim, M. J¨ unger, and S. Leipert. Improving walker’s algorithm to run in linear time. In M. Goodrich, editor, Graph Drawing (Proc. GD 2002), volume 2528 of LNCS, pages 344–353. Springer-Verlag, 2002.

© 2005 by Chapman & Hall/CRC

Drawing Trees

45-19

[3] Cormen, T., Leiserson, C., and Rivest, R. (1990). Introduction to Algorithms . MITPress. [4] P. Crescenzi, G. Di Battista, and A. Piperno. A note on optimal area algorithms for upward drawings of binary trees. Computational Geometry, 2:187–200, 1992. [5] P. Crescenzi and A. Piperno. Optimal-area upward drawings of AVL trees. In R. Tamassia and I.G. Tollis, editors, Graph Drawing (Proc. GD 1994), volume 894 of LNCS, pages 307–317. Springer-Verlag, 1995. [6] P. Crescenzi and P. Penna. Strictly-upward drawings of ordered search trees. Theoretical Computer Science, 203(1):51–67, 1998. [7] P. Crescenzi, P. Penna, and A. Piperno. Linear-area upward drawings of AVL trees. Comput. Geom. Theory Appl., 9:25–42, 1998. (special issue on Graph Drawing, edited by G. Di Battista and R. Tamassia). [8] P. Eades. Drawing free trees. Bulletin of the Inst. for Combinatorics and its Applications, 5:10–36, 1992. [9] C. Esposito. Graph graphics: Theory and practice. Comput. Math. Appl., 15(4):247– 253, 1988. [10] A. Garg, M. T. Goodrich, and R. Tamassia. Planar upward tree drawings with optimal area. Internat. J. Comput. Geom. Appl., 6:333–356, 1996. [11] A. Garg and A. Rusu. Straight-line drawings of binary trees with linear area and arbitrary aspect ratio. In M. Goodrich, editor, Graph Drawing (Proc. GD 2002), volume 2528 of LNCS, pages 320–331. Springer-Verlag, 2002. [12] S. K. Kim. Simple algorithms for orthogonal upward drawing of binary and ternary trees. In Proc. 7th Canad. Conf. Comput. Geometry, pages 115–120, 1995. [13] S. K. Kim. H-V drawings of binary trees. In Software Visualization, volume 7 of Software Engineering and Knowledge Engineering, pages 101–116, 1996. [14] X. Lin P. Eades, T. Lin. Minimum size h-v drawings. In Advanced Visual Interfaces, volume 36 of World Scientiﬁc Series in Computer Science, pages 386–394, 1992. [15] X. Lin P. Eades, T. Lin. Two tree drawing conventions. International Journal of Computational Geometry and Applications, 3(2):133–153, 1993. [16] J. Manning and M. Atallah. Fast detection and display of symmetry in trees. Congr. Numer., 64:159–169, 1988. [17] E. Reingold and J. Tilford. Tidier drawing of trees. IEEE Trans. Softw. Eng., SE7(2):223–228, 1981. [18] K.R. Supovit and E. Reingold. The complexity of drawing trees nicely. Act Informatica, 18:377–392, 1983. [19] B. Schieber and U. Vishkin. On ﬁnding lowest common ancestors: Simpliﬁcation and parallelization. In Proceedings of the Third Aegean Workshop on Computing, volume 319 of Lecture Notes in Computer Science, pages 111–123. Springer-Verlag, 1988. [20] Y. Shiloach. Arrangements of Planar Graphs on the Planar Lattice. PhD thesis, Weizmann Institute of Science, 1976. [21] C.-S. Shin, S. K. Kim, and K.-Y. Chwa. Area-eﬃcient algorithms for straight-line tree drawings. Comput. Geom. Theory Appl., 15:175–202, 2000. [22] L. Trevisan. A note on minimum-area upward drawing of complete and Fibonacci trees. Inform. Process. Lett., 57(5):231–236, 1996. [23] J. Q. Walker II. A node-positioning algorithm for general trees. Softw. – Pract. Exp., 20(7):685–705, 1990. [24] C. Wetherell and A. Shannon. Tidy drawings of trees. IEEE Transactions on Software Engineering, 5(5):514–520, 1979.

© 2005 by Chapman & Hall/CRC

46 Drawing Graphs 46.1 46.2 46.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preliminaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Convex Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46-1 46-4 46-5

Barycenter Algorithm • Divide and Conquer Algorithm • Algorithm Using Canonical Ordering

46.4

Symmetric Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46-7

Displaying Rotational Symmetry • Displaying Axial Symmetry • Displaying Dihedral Symmetry

46.5

Peter Eades

Planar st-Graphs • The Bar Visibility Algorithm • Bar Visibility Representations and Layered Drawings • Bar Visibility Representations for Orthogonal Drawings

University of Sydney and NICTA

Seok-Hee Hong 46.6

University of Sydney and NICTA

46.1

Visibility Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-13

Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-19

Introduction

Graph Drawing (see Chapter 4 for an introduction to graphs) is the art of making pictures of relationships. For example, consider the social network deﬁned in Table 46.1. This table expresses the “has-written-a-joint-paper-with” relation for a small academic community.

Name Jane Sally Dennis Harry Monty Ying Paula Kerry Tan Cedric Chris

TABLE 46.1

has-a-joint-paper-with Harry, Paula, and Sally Jane, Paula and Dennis Sally and Monty Jane and Paula Dennis and Kerry Paula Jane, Harry, Ying, Tan, Cedric, Chris, Kerry and Sally Paula and Monty Paul and Cedric Tan, Paula, and Chris Paula and Cedric

Table representing the has-a-joint-paper-with relation.

It is easier to understand this social network if we draw it. A drawing is in Figure 46.1(a); a better drawing is in Figure 46.1(b). The challenge for Graph Drawing is to automatically create good drawings of graphs such as in Figure 46.1(b), starting with tables such as in Table 46.1.

46-1

© 2005 by Chapman & Hall/CRC

46-2

Handbook of Data Structures and Applications Jane

Harry

Tan

Sally

Denis

Monty

Kerry

Cedric

Paula

Chris

Ying

(a)

Jane

Harry

Ying

Sally

Denis

Monty

Tan

Paula

Cedric

Kerry

Chris

(b)

FIGURE 46.1: Two drawings of a social network. The criteria of a good drawing of a graph have been the subject of a great deal of attention (see, for example, [3, 29, 30]). The four criteria below are among the most commonly used criteria. • Edge crossings should be avoided. Human tests clearly indicate that edge crossings inhibit the readability of the graph [30]. Figure 46.1(a) has 6 edge crossings, and Figure 46.1(b) has none; this is the main reason that Figure 46.1(b) is more readable than Figure 46.1(a). The algorithms presented in this chapter deal with planar drawings, that is, drawings with no edge crossings. • The resolution of a graph drawing should be as large as possible. There are several ways to deﬁne the intuitive concept of resolution; the simplest is the vertex resolution, that is, the ratio of the minimum distance between a pair of vertices to the maximum distance between a pair of vertices. High resolution helps readability because it allows a larger font size to be used in the textual labels on vertices. In practice it can be easier to measure the area of the drawing, given that the minimum distance between a pair of vertices is one. If the vertices in Figure 46.1 are on an integer grid, then the drawing √ is 4 units by 2 units, for both (a) and (b). Thus the vertex resolution is 1/2 5 0.2236, and the area is 8. One can reﬁne the concept of resolution to deﬁne edge resolution and angular resolution. • The symmetry of the drawing should be maximized. Symmetry conveys the structure of a graph, and Graph Theory textbooks commonly use drawings that are as symmetric as possible. Intuitively, Figure 46.1(b) displays more symmetry than Figure 46.1(a). A reﬁned concept of symmetry display is presented in Section 46.4. • Edge bends should be minimized. There is some empirical evidence to suggest that bends inhibit readability. In Figure 46.1(a), three edges contain bends and

© 2005 by Chapman & Hall/CRC

46-3

Drawing Graphs eleven are straight lines; in total, there are seven edge bends. Figure 46.1(b) is much better: all edges are straight lines.

Each of these criteria can be measured. Thus Graph Drawing problems are commonly stated as optimization problems: given a graph G, we need to ﬁnd a drawing of G for which one or more of these measures are optimal. These optimization problems are usually NP-complete. In most cases it is not possible to optimize one of the criteria above without compromise on another. For example, the graph in Figure 46.2(a) has 8 symmetries but one edge crossing. It is possible to draw this graph without edge crossings, but in this case we can only get 6 symmetries, as in Figure 46.2(b).

(a)

(b)

FIGURE 46.2: Two drawings of a graph.

The optimization problem may be constrained. For example, consider a graph representing prerequisite dependencies between the units in a course, as in Figure 46.3; in this case, the y coordinate of a unit depends on the semester in which the unit ought to be taken.

Semester 1

Math I

Semester 2

Math II

Semester 3

Theory

Semester 4

Networks

Java I

Java II

Algorithms

O/S

Semester 5

Graphics

Database

Semester 6

Project

OO Design

C++

Compilers

FIGURE 46.3: Prerequisite diagram.

© 2005 by Chapman & Hall/CRC

AI

46-4

Handbook of Data Structures and Applications

Graph Drawing has a long history in Mathematics, perhaps beginning with the theorem of Wagner that every planar graph can be drawn with straight line edges [38]. The importance of graph drawing algorithms was noted early in the history of Computer Science (note the paper of Knuth on drawing ﬂowcharts, in 1960 [23], and the software developed by Read in the 1970s [31]). In the 1980s, the availability of graphics workstations spawned a broad interest in visualization in general and in graph visualization in particular. The ﬁeld became mature in the mid 1990s with a conference series (for example, see [15]), some books [8, 22, 33], and widely available software (see [20]). In this Chapter we brieﬂy describe just a few of the many graph available drawing algorithms. Section 46.3 presents some algorithms to draw planar graphs with straight line edges and convex faces. Section 46.4 describes two algorithms that can be used to construct planar symmetric drawings. Section 46.5 presents a method for constructing “visibility” representations of planar graphs, and shows how this method can be used to construct drawings with few bends and reasonable resolution.

46.2

Preliminaries

Basic concepts of mathematical Graph Theory are described in [4]. In this section we deﬁne mathematical notions that are used in many Graph Drawing algorithms. A drawing D of a graph G = (V, E) assigns a location D(u) ∈ R2 for every vertex u ∈ V and a curve D(e) in R2 for every edge e ∈ E such that if e = (u, v) then the curve D(e) has endpoints D(u) and D(v). If D(u) has integer coordinates for each vertex u, then D is a grid drawing. If the curve D(e) is a straight line segment for each edge e, then D is a straight line drawing. For convenience we often identify the vertex u with its location D(u), and the edge e with its corresponding curve D(e); for example, when we say “the edge e crosses the edge f ”, strictly speaking we should say “the curve D(e) crosses the curve D(f )”. A graph drawing is planar if adjacent edges intersect only at their common endpoint, and no two nonadjacent edges intersect. A graph is planar if it has a planar drawing. Planarity is a central concern of Graph Theory, Graph Algorithms, and especially Graph Drawing; see [4]. A planar drawing of a graph divides the plane into regions called faces. One face is unbounded; this is the outside face. Two faces are adjacent if they share a common edge. The graph G together its faces and the adjacency relationship between the faces is a plane graph. The graph whose vertices are the faces of a plane graph G and whose edges are the adjacency relationships between faces is the planar dual, or just dual, of G. A graph and its planar dual are in Figure 46.4.

a

g

b

d

c

f

f

a

b

c

g

e e (a)

(b)

FIGURE 46.4: (a) A graph G and its faces. (b) The dual of G.

© 2005 by Chapman & Hall/CRC

d

Drawing Graphs

46-5

The neighborhood N (u) of a vertex u is the list of vertices that are adjacent to u. If G is a plane graph, then N (u) is given in the clockwise circular ordering about u.

46.3

Convex Drawing

A straight-line drawing of a planar graph is convex if all every face is drawn as convex polygon. This section reviews three diﬀerent algorithms for constructing such a drawing for planar graphs.

46.3.1

Barycenter Algorithm

Tutte showed that a convex drawing exist for triconnected planar graphs and gave an algorithm for constructing such representations [36, 37]. The algorithm divides the vertex set V into two subsets; a set of ﬁxed vertices and a set of free vertices. The ﬁxed vertices are placed at the vertices of a strictly convex polygon. The positions of free vertices are decided by solving a system of O(n) linear equations, where n is the number of vertices of the graph [37]. In fact, solving the equations is equivalent to placing each free vertex at the barycenter of its neighbors. That is, each position p(v) = (x(v), y(v)) of a vertex v is: x(v) =

1 deg(v)

x(w),

y(v) =

(v,w)∈E

1 deg(v)

y(w).

(46.1)

(v,w)∈E

An example of a drawing computed by the barycenter algorithm is illustrated in Figure 46.5. Here the black vertices represent ﬁxed vertices.

FIGURE 46.5: Example output from the algorithm of Tutte.

The main theorem can be described as follows. (Tutte [36, 37]) Suppose that f is a face in a planar embedding of a triconnected planar graph G, and P is a strictly convex planar drawing of f . Then the barycenter algorithm with the vertices of f ﬁxed and positioned according to P gives a convex planar drawing of G. THEOREM 46.1

The matrix resulting from the equations can be solved in O(n1.5 ) time at best, using a sophisticated sparse matrix elimination method [25]. However, in practice a NewtonRaphson iteration of the equation above converges rapidly.

© 2005 by Chapman & Hall/CRC

46-6

Handbook of Data Structures and Applications

46.3.2

Divide and Conquer Algorithm

Chiba, Yamanouchi and Nishizeki [6] present a linear time algorithm for constructing convex drawings of planar graphs, using divide and conquer. The algorithm constructs a convex drawing of a planar graph, if it is possible, with a given outside face. The drawing algorithm is based on a classical result by Thomassen [35]. The input to their algorithm is a biconnected plane graph with given outside face and a convex polygon. The output of their algorithm is a convex drawing of the biconnected plane graph with outside face drawn as the input convex polygon, if this is possible. The conditions under which such a drawing is possible come from the following theorem [35]. (Thomassen [35]) Let G be a biconnected plane graph with outside facial cycle S, and let S ∗ be a drawing of S as a convex polygon. Let P1 , P2 , . . . , Pk be the paths in S, each corresponding to a side of S ∗ . (Thus S ∗ is a k-gon. It should be noted that not every vertex of the cycle S is necessarily an apex of the polygon S ∗ .) Then S ∗ can be extended to a convex drawing of G if and only if the following three conditions hold. THEOREM 46.2

1. For each vertex v of G − V (S) having degree at least three in G, there are three paths disjoint except at v, each joining v and a vertex of S; 2. The graph G − V (S) has no connected component C such that all the vertices on S adjacent to vertices in C lie on a single path Pi ; and no two vertices in each Pi are joined by an edge not in S; and 3. Any cycle of G which has no edge in common with S has at least three vertices of degree at least 3 in G. The basic idea of the algorithm of Chiba et al. [6] is to reduce the convex drawing of G to those of several subgraphs of G as follows: 1. 2. 3. 4.

Algorithm ConvexDraw(G, S, S ∗) Delete from G an arbitrary apex v of S ∗ together with edges incident to v. Divide the resulting graph G = G−v into the biconnected components B1 , B2 , . . . , Bp . Determine a convex polygon Si∗ for the outside facial cycle Si of each Bi so that Bi with Si∗ satisﬁes the conditions in Theorem 46.2. Recursively apply the algorithm to each Bi with Si∗ to determine the positions of vertices not in Si .

The main idea of the algorithm is illustrated in Figure 46.6; for more details see [6]. It is easy to show that the algorithm runs in linear time, and its correctness can be established using Theorem 46.2. THEOREM 46.3 (Chiba, Yamanouchi and Nishizeki [6]) Algorithm ConvexDraw constructs a convex planar drawing of a biconnected plane graph with given outside face in linear time, if such a drawing is possible.

46.3.3

Algorithm Using Canonical Ordering

Both the Tutte algorithm and the algorithm of Chiba et al. give poor resolution. Kant [21] gives a linear time algorithm for constructing a planar convex grid drawing of a triconnected planar graph on a (2n − 4) × (n − 2) grid, where n is the number of vertices. This guarantees that the vertex resolution of the drawing is Ω(1/n).

© 2005 by Chapman & Hall/CRC

Drawing Graphs

46-7 v

v1

vp+

1

B1

v2

Bp B2

B p-

... v3

1

vp

v

p- 1

FIGURE 46.6: The algorithm of Chiba et al. Kant’s algorithm is based on a method of de Fraysseix, Pach and Pollack [10] for drawing planar triangulated graphs on a grid of size (2n − 4) × (n − 2). The algorithm of de Fraysseix et al. [10] computes a special ordering of vertices called the canonical ordering based on ﬁxed embedding. Then the vertices are added, one by one, in order to construct a straight-line drawing combined with shifting method. Note that the outside face of the drawing is always triangle, as shown in Figure 46.7.

FIGURE 46.7: Planar straight-line grid drawing given by de Fraysseix, Pach and Pollack method.

Kant [21] uses a generalization of the canonical ordering called leftmost canonical ordering. The main diﬀerence from the algorithm of de Fraysseix et al. [10] is that it gives a convex drawing of triconnected planar graph. The following Theorem summarizes his main result. (Kant [21]) There is a linear time algorithm to construct a planar straight-line convex drawing of a triconnected planar graph with n vertices on a (2n − 4) × (n − 2) grid. THEOREM 46.4

Details of Kant’s algorithm are in [21]. Chrobak and Kant improved the algorithm so that the size of the grid is (n − 2) × (n − 2) [7].

46.4

Symmetric Drawing

A graph drawing can have two kinds of symmetry: axial (or reﬂectional) symmetry and rotational symmetry. For example, see Figure 46.8. The drawing in Figure 46.8(a) displays four rotational symmetries and Figure 46.8(b) displays one axial symmetry. Figure 46.8(c)

© 2005 by Chapman & Hall/CRC

46-8

Handbook of Data Structures and Applications

displays eight symmetries, four rotational symmetries as well as four axial symmetries.

(a)

(b)

(c)

FIGURE 46.8: Three symmetric drawings of graphs.

Manning [28] showed that, in general, the problem of determining whether a given graph can be drawn symmetrically is NP-complete. De Fraysseix [9] presents heuristics for symmetric drawings of general graphs. Exact algorithms for ﬁnding symmetries in general graphs were presented by Buchheim and Junger [5], and Abelson, Hong and Taylor [1]. There are linear time algorithms available for restricted classes of graphs. Manning and Atallah present a liner time algorithm for detecting symmetries in trees [26], outerplanar graphs [27], and plane graphs [28]. Hong, Eades and Lee present a linear time algorithm for drawing series-parallel digraphs symmetrically [17]. In this section we brieﬂy describe a linear time algorithm to draw triconnected planar graphs with maximum symmetry. Note that the algorithm of Tutte described in Section 46.3.1 can be used to construct symmetric drawings of triconnected planar graphs, but it does not work in linear time. Here we give the linear time algorithm of Hong, McKay and Eades [18]. It has two steps: 1. Symmetry ﬁnding: this step ﬁnds symmetries, or so-called geometric automorphisms [12], in graphs. 2. Symmetric drawing: this step constructs a drawing that displays these automorphisms. More speciﬁcally, the symmetry ﬁnding step ﬁnds a plane embedding that displays the maximum number of symmetries. It is based on a classical theorem from group theory called the orbit-stabilizer theorem [2]. It also uses a linear time algorithm of an algorithm of Fontet [14] to compute orbits and generators for groups of geometric automorphisms. For details, see [18]. Here we present only the second step, that is, the drawing algorithm. This constructs a straight-line planar drawing of a given triconnected plane graph such that given symmetries are displayed. The drawing algorithm has three routines, each corresponding to a type of group of symmetries in two dimensions: 1. the cyclic case: displaying k rotational symmetries; 2. one axial case: displaying one axial symmetry;

© 2005 by Chapman & Hall/CRC

Drawing Graphs

46-9

3. the dihedral case: displaying 2k symmetries (k rotational symmetries and k axial symmetries). The dihedral case is important for displaying maximum number of symmetries, however it is the most diﬃcult to achieve. Here, we concentrate on the ﬁrst two cases; the cyclic case and the one axial case. In Section 46.4.1, we describe an algorithm for constructing a drawing displaying rotational symmetry and in Section 46.4.2 we describe an algorithm for constructing a drawing displaying axial symmetry. We brieﬂy comments on the dihedral case in Section 46.4.3. The input of the drawing algorithm is a triconnected plane graph; note that the outside face is given. Further, the algorithm needs to compute a triangulation as a preprocessing step. More speciﬁcally, given a plane embedding of triconnected planar graphs with a given outside face, we triangulate each internal face by inserting a new vertex in the face and joining it to each vertex of the face. This process is called star-triangulation and clearly it takes only linear time. A major characteristic of symmetric drawings is the repetition of congruent drawings of isomorphic subgraphs. The algorithms use this property, that is, they compute a drawing for a subgraph and then use copies of it to draw the whole graph. More speciﬁcally, each symmetric drawing algorithm consists of three steps. First, it ﬁnds a subgraph. Then it draws the subgraph using the algorithm of Chiba et al. [6] as a subroutine. The last step is to replicate the drawing; that is, merge copies of the subgraphs to construct a drawing of the whole graph. The application of Theorem 46.2 is to subgraphs of a triconnected plane graph deﬁned by a cycle and its interior. In that case Thomassen’s conditions can be simpliﬁed. Suppose that P is a path in a graph G; a chord for P in G is an edge (u, v) of G not in P , but whose endpoints are in P .

Let G be a triconnected plane graph and let S be a cycle of G. Let W be the graph consisting of S and its interior. Let S ∗ be a drawing of S as a convex k-gon (where S might have more than k vertices). Let P1 , P2 , . . . , Pk be the paths in S corresponding to the sides of S ∗ . Then S ∗ is extendable to a straight-line planar drawing of W if and only if no path Pi has a chord in W . COROLLARY 46.1

We can assume that the interior faces of W are triangles, since otherwise we can star triangulate them.

Proof

We need to show that Thomassen’s three conditions are met. Condition 1 is a standard implication of the triconnectivity of G, and Condition 3 follows just from the observation that the internal vertices have degree at least 3. To prove the ﬁrst part of Condition 2, suppose on the contrary that C is a connected component of W − S which is adjacent to Pi but not to any other of P1 , . . . , Pk . Let u and v be the ﬁrst and last vertices on Pi which are adjacent to C. If u = v, or u and v are adjacent on Pi , then {u, v} is a cut (separation pair) in G, which is impossible as G is triconnected. Otherwise, there is an interior face containing u and v and so u and v are adjacent contrary to our hypothesis (since the internal faces are triangles). The second part of Condition 2 is just the condition that we are imposing.

© 2005 by Chapman & Hall/CRC

46-10

Handbook of Data Structures and Applications

46.4.1

Displaying Rotational Symmetry

Firstly, we consider the cyclic case, that is, displaying k rotational symmetries. Note that after the star-triangulation, we may assume that there is either an edge or a vertex ﬁxed by the symmetry. The ﬁxed edge case can only occur if k = 2 and this case can be transformed into the ﬁxed vertex case by inserting a dummy vertex into the ﬁxed edge with two dummy edges. Thus we assume that there is a ﬁxed vertex c. The symmetric drawing algorithm for the cyclic case consists of three steps. Algorithm Cyclic 1. Find Wedge Cyclic. 2. Draw Wedge Cyclic. 3. Merge Wedges Cyclic. The ﬁrst step is to ﬁnd a subgraph W , called a wedge, as follows. 1. 2. 3. 4.

Algorithm Find Wedge Cyclic Find the ﬁxed vertex c. Find a shortest path P1 , from c to a vertex v1 on the outside face. This can be done in linear time by breadth ﬁrst search. Find the path P2 which is a mapping of P1 under the rotation. Find the induced subgraph of G enclosed by the cycle formed from P1 , P2 and a path P0 along the outside face from v1 to v2 (including the cycle). This is the wedge W .

A wedge W is illustrated in Figure 46.9(a). It is clear that Algorithm Find Wedge Cyclic runs in linear time. PO P1 P2

(a)

(b)

FIGURE 46.9: Example of (a) a wedge and (b) merging.

The second step, Draw Wedge Cyclic, constructs a drawing D of the wedge W using Algorithm ConvexDraw, such that P1 and P2 are drawn as straight-lines. This is possible by the next lemma. LEMMA 46.1 Suppose that W is the wedge computed by Algorithm Find Wedge Cyclic, S is the outside face of W , and S ∗ is the drawing of the outside face S of W using three straight-lines as in Figure 46.9(a). Then S ∗ is extendable to a planar straight-line drawing of W .

© 2005 by Chapman & Hall/CRC

Drawing Graphs

46-11

One of the three sides of S ∗ corresponds to part of the outside face of G, which cannot have a chord as G is triconnected. The other two sides cannot have chords either, as they are shortest paths in G. Thus W and S ∗ satisfy the conditions of Corollary 46.1. Proof

The last step, Merge Wedges Cyclic, constructs a drawing of the whole graph G by replicating the drawing D of W , k times. Note that this merge step relies on the fact that P1 and P2 are drawn as straight-lines. This is illustrated in Figure 46.9 (b). Clearly, each of these three steps takes linear time. Thus the main result of this section can be stated as follows. THEOREM 46.5 Algorithm Cyclic constructs a straight-line drawing of a triconnected plane graph which shows k rotational symmetry in linear time.

46.4.2

Displaying Axial Symmetry

A critical element of the algorithm for displaying one axial symmetry is the subgraph that is ﬁxed by the axial symmetry. Consider a drawing of a star-triangulated planar graph with one axial symmetry. There are ﬁxed vertices, edges and/or ﬁxed faces on the axis. The subgraph formed by these vertices, edges and faces, is called a ﬁxed string of diamonds. The ﬁrst step of the algorithm is to identify the ﬁxed string of diamonds. Then the second step is to use Algorithm Symmetric ConvexDraw, a modiﬁed version of Algorithm ConvexDraw. Thus Algorithm One Axial can be described as follows. Algorithm One Axial 1. Find a ﬁxed string of diamonds. Suppose that ω1 , ω2 , . . . , ωk are the ﬁxed edges and vertices in the ﬁxed string of diamonds, in order from the outside face (ω1 is on the outside face). For each 0, ω may be a vertex or an edge. This is illustrated in Figure 46.10. 2. Choose an axially symmetric convex polygon S ∗ for the outside face of G. 3. Symmetric ConvexDraw(1, S ∗, G).

ω1 ω2 ω3 ω4 ω5 ω6 ω7 ω8

FIGURE 46.10: A string of diamonds.

The main subroutine in Algorithm One Axial is Algorithm Symmetric ConvexDraw. This algorithm, described below, modiﬁes Algorithm ConvexDraw so that the following three

© 2005 by Chapman & Hall/CRC

46-12

Handbook of Data Structures and Applications

conditions are satisﬁed. 1. Choose v in Step 1 of Algorithm ConvexDraw to be ω1 . In Algorithm ConvexDraw, v must be a vertex; here we extend Algorithm ConvexDraw to deal with an edge or a vertex. The two cases are illustrated in Figure 46.11. 2. Let D(Bi ) be the drawing of Bi and α be the axial symmetry. Then, D(Bi ) should be a reﬂection of D(Bj ), where Bj = α(Bi ), i = 1, 2, . . . , m and m = p/2. 3. If p is odd, then D(Bm+1 ) should display one axial symmetry. It is easy to see that satisfying these three conditions ensures the display a single axial symmetry. ω1

ω1

vp+

v1

1

B1

v2

Bp

B2

...

... B

B p-

1

vp+

v1

1

B1 vp

v2

Bp

B p-

Bm+

m+1

v3

...

...

B2

1

vp

1

v

p- 1

(a)

v3

v

p- 1

(b)

FIGURE 46.11: Symmetric version of ConvexDraw. Let Bj = α(Bi ). The second condition can be achieved as follows. First deﬁne Sj∗ to be the reﬂection of Si∗ , i = 1, 2, . . . , m. Then apply Algorithm ConvexDraw for Bi , i = 1, 2, . . . , m and construct D(Bj ) using a reﬂection of D(Bi ). If p is odd then we recursively apply Algorithm Symmetric ConvexDraw to Bm+1 . Thus Algorithm Symmetric ConvexDraw can be described as follows. Algorithm Symmetric ConvexDraw(0, S ∗, G) 1. Delete ω from G together with edges incident to ω . Divide the resulting graph G = G − ω into the blocks B1 , B2 , . . . , Bp , ordered anticlockwise around the outside face. Let m = p/2. 2. For each i = 1 to m, determine a convex polygon Si∗ of the outside facial cycle Si of each Bi so that Bi with Si∗ satisfy the conditions in Theorem 46.2 and chose ∗ Sp−i+1 to be a reﬂection of Si∗ . 3. For each i = 1 to m, (a) Construct a drawing D(Bi ) of Bi using Algorithm ConvexDraw. (b) Construct D(Bp−i+1 ) as a reﬂection of D(Bi ). 4. If p is odd, then construct a drawing D(Bm+1 ) using Symmetric ConvexDraw(0+ ∗ 1, Sm+1 , Bm+1 ). 5. Merge the D(Bi ) to form a drawing of G.

© 2005 by Chapman & Hall/CRC

Drawing Graphs

46-13

Using the same argument as for the linearity of Algorithm ConvexDraw [6], one can show that Algorithm One Axial takes linear time. Algorithm One Axial constructs a straight-line drawing of a triconnected plane graph which shows one axial symmetry in linear time.

THEOREM 46.6

46.4.3

Displaying Dihedral Symmetry

In this section, we brieﬂy review an algorithm for constructing a drawing displaying k axial symmetries and k rotational symmetries. As with the cyclic case, we assume that there is a vertex ﬁxed by all the symmetries. The algorithm adopts the same general strategy as for the cyclic case: divide the graph into “wedges”, draw each wedge, then merge the wedges together to make a symmetric drawing. However, the dihedral case is more diﬃcult than the pure rotational case, because an axial symmetry in the dihedral case can have ﬁxed edges and/or ﬁxed faces. This requires a much more careful applications of the Algorithm ConvexDraw and Algorithm Symmetric ConvexDraw; for details see [18]. Nevertheless, using three steps above, a straight-line drawing of a triconnected plane graph which shows dihedral symmetry can be constructed in linear time. In conclusion, the symmetry ﬁnding algorithm together with the three drawing algorithms ensures the following theorem which summarizes their main result. (Hong, McKay and Eades [18]) There is a linear time algorithm that constructs maximally symmetric planar drawings of triconnected planar graphs, with straight-line edges. THEOREM 46.7

46.5

Visibility Drawing

In general, a visibility representation of a graph has a geometric shape for each vertex, and a “line of sight” for each edge. Diﬀerent visibility representations involve diﬀerent kinds of geometric shapes and diﬀerent restrictions on the “line of sight”. A three dimensional visibility representation of the complete graph on ﬁve vertices is in Figure 46.12. Here the geometric objects are rectangular prisms, and each “line of sight” is parallel to a coordinate axis. Visibility representations have been extensively investigated in both two and three dimensions. For two dimensional graph drawing, the simplest and most common visibility representation uses horizontal line segments (called “bars”) for vertices and vertical line segments for “lines of sight”. More precisely, a bar visibility representation of a graph G = (V, E) consists of a horizontal line segment ωu for each vertex u ∈ V , and a vertical line segment λe for each edge e ∈ E, such that the following properties hold: P1: P2: P3: P4:

If u and u are distinct vertices of G, then ωu has empty intersection with ωu . If e and e are distinct edges of G, then λe has empty intersection with λe . If e is not incident with u then λe has empty intersection with ωu . If e is incident with u then the intersection of λe and ωu consists of an endpoint of λe on ωu .

© 2005 by Chapman & Hall/CRC

46-14

Handbook of Data Structures and Applications

FIGURE 46.12: A visibility representation in three dimensions (courtesy of Nathalie Henry). Figure 46.13 shows a bar visibility representation of the 3-cube.

FIGURE 46.13: A bar visibility representation of the 3-cube.

It is clear that if G admits a bar visibility representation, then G is planar. Tamassia and Tollis [34] and Rosenstiehl and Tarjan [32] proved the converse: every planar graph has a bar visibility representation. Further, they showed that the resulting drawing has quadratic area, that is, the resolution is good. The algorithms from [34] and [32] construct such a representation in linear time. In the Section 46.5.1 below we describe some concepts used to present the algorithm. Section 46.5.2 describes the basic algorithm for constructing bar visibility representations, and Sections 46.5.3 and 46.5.4 show how to apply these representations to obtain layered drawings and orthogonal drawings respectively. The algorithm in Section 46.5.2 and some of the preceding results are stated in terms of biconnected planar graphs. Note that this restriction can be avoided by augmenting graphs of lower connectivity with dummy edges.

© 2005 by Chapman & Hall/CRC

Drawing Graphs

46.5.1

46-15

Planar st-Graphs

Bar visibility representation algorithms use the theory of planar st-graphs. This is a powerful theory which is useful in a variety of graph drawing applications. In this section we describe enough of this theory to allow presentation of a bar visibility algorithm; for proofs of the results here, and more details about planar st-graphs, see [8]. A directed plane graph is a planar st-graph if it has one source s and one sink t, and both s and t are on the outside face. We say that a vertex u on a face f of a planar st-graph is a source for f (respectively sink for f ) if the edges incident with u on f are out-edges (respectively in-edges). LEMMA 46.2

Every face f of a planar st-graph has one source sf for f and one sink tf

for f . We need to extend the concept of the “planar dual”, deﬁned in Section 46.2, to directed graphs. For a directed plane graph G, the directed dual G∗ has a vertex vf for each internal face f of G, as well as two vertices 0ext and rext for the external face of G. To deﬁne the edges of G∗ , we must ﬁrst deﬁne the lef t and right side face of each edge of G. Suppose that f is an internal face of G, and the cycle of edges traversing f in a clockwise direction is (e1 , e2 , . . . , ek ). The clockwise traversal may pass through some edges in the same direction as the edge, and some edges in the opposite direction. If we pass through ei in the same direction as ei then we deﬁne right(ei ) = vf ; if we pass through ej in the opposite direction to ej then we deﬁne lef t(ej ) = vf . Now consider a clockwise traversal (e 1 , e 2 , . . . , e k ) of the external face of G. If we pass through e i in the same direction as e i then we deﬁne lef t(ei ) = 0ext ; if we pass through ej in the opposite direction to ej then we deﬁne right(ej ) = rext . One can easily show that the deﬁnitions of lef t and right are well founded, that is, that for each edge e there is precisely one face f of G such that lef t(e) = vf and precisely one one face f of G such that right(e) = vf . For each edge e of G, G∗ has an edge from lef t(e) to right(e). An example is in Figure 46.14. Here 0ext = 1 = lef t(e), and rext = 5 = right(j) = right(g), lef t(f ) = lef t(i) = 2, right(f ) = right(h) = 4, and lef t(h) = right(i) = 3. d j i

3

c

5

h

1 2

b 4

e

f

g

a

FIGURE 46.14: A directed planar graph and its directed dual.

© 2005 by Chapman & Hall/CRC

46-16

Handbook of Data Structures and Applications

The following Lemma (see [8] for a proof) is important for the bar visibility algorithm. LEMMA 46.3

Suppose that f and f are faces in a planar st-graph G. Then precisely one of the following statements is true. (a) (b) (c) (d)

There There There There

is is is is

a a a a

directed directed directed directed

path path path path

in in in in

G from the sink of f to the source of f . G from the sink of f to the source of f . G∗ from vf to vf . G∗ from vf to vf .

The next Lemma is, in a sense, dual to Lemma 46.2. Suppose that u is a vertex in a planar st-graph. The outgoing edges from u are consecutive in the circular ordering of N (u), and the incoming edges are consecutive in the circular ordering of N (u). LEMMA 46.4

Lemma 46.4 leads to a deﬁnition of the lef t and right of a vertex. Suppose that (e1 , e2 , . . . , ek ) is the circular list of edges around a non-source non-sink vertex u, in clockwise order. From Lemma 46.4, for some i, edge ei comes into u and edge ei+1 goes out from u. we say that ei is the leftmost in-edge of u and ei+1 is the leftmost out-edge of u. If f is the face shared by ei and ei+1 then we deﬁne lef t(u) = f . Similarly, there is a j such that edge ej goes out from u and edge ej+1 comes into u; we say that ej is the rightmost out-edge of u and ej+1 is the rightmost in-edge of u. If f is shared by ej and ej+1 then we deﬁne right(ej ) = f . If u is either the source or the sink, then lef t(u) = 0ext and right(u) = rext . In Figure 46.14, for example, lef t(a) = lef t(d) = 1, lef t(b) = 2, lef t(c) = 3, right(b) = 4, and right(a) = right(c) = right(d) = 5. Finally, we need the following Lemma, which is a kind of dual to Lemma 46.3. LEMMA 46.5

Suppose that u and u are vertices in G. Then precisely one of the following statements is true. (a) (b) (c) (d)

There There There There

46.5.2

is is is is

a a a a

directed directed directed directed

path path path path

in in in in

G from u to u . G from u to u. G∗ from right(u) to lef t(u ). G∗ from right(u ) to lef t(u).

The Bar Visibility Algorithm

The bar visibility algorithm takes a biconnected plane graph as input, and converts it to a planar st-graph. Then it computes the directed dual, and a “topological number” (deﬁned below) for each vertex in both the original graph and the dual. Using these numbers, it assigns a y coordinate for each vertex and an x coordinate for each edge. The bar representing the vertex extends far enough to touch each incident edge, and the vertical line representing the edge extends far enough to touch each the bars representing its endpoints. If G = (V, E) is an acyclic directed graph with n vertices, a topological numbering Z of G assigns an integer Z(u) ∈ {0, 1, . . . , n − 1} to every vertex u ∈ V such that Z(u) < Z(v) for

© 2005 by Chapman & Hall/CRC

Drawing Graphs

46-17

all directed edges (u, v) ∈ E. Note that we do not require that the function Z be one-one, that is, it is possible that two vertices are assigned the same number. The algorithm is described below.

1. 2. 3. 4. 5. 6. 7.

Algorithm Bar Visibility Input: a biconnected plane graph G = (V, E) Output: a bar visibility representation of G Choose two vertices s and t of G on the same face. Direct the edges of G so that s is the only source, t is the only sink, and the resulting digraph is acyclic. Compute a topological numbering Y for G. Compute the directed planar dual G∗ = (V ∗ , E ∗ ) of G. Compute a topological numbering X for G∗ . For each vertex u, let ωu be the line segment [(X(lef t(u)), Y (u)), (X(right(u)) − 1, Y (u))]. For each edge e = (u, v), let λe be the line segment [(X(lef t(e)), Y (u)), (X(lef t(e)), Y (v))].

Step 2 can be implemented by a simple variation on the depth-ﬁrst-search method, based on a biconnectivity algorithm. There are many kinds of topological numberings for acyclic digraphs: for example, one can deﬁne Z(u) to be the number of edges in the longest path from the source s to u. Any of these methods can be used in steps 3 and 5. THEOREM 46.8 (Tamassia and Tollis [34]; Rosenstiehl and Tarjan [32]) A visibility representation of a biconnected planar graph with area O(n) × O(n) can be computed in linear time.

We need to show that the drawing deﬁned by ω and λ in Algorithm Bar Visibility satisﬁes the four properties P1, P2, P3 and P4 above. First consider P1, and suppose that u and u are two vertices of G. If Y (u) = Y (u ) then ωu has empty intersection with ωu and so P1 holds. Now suppose that Y (u) = Y (u ). Since Y is a topological numbering of G, it follows that there is no directed path in between u and u (in either direction). Thus, from Lemma 46.5, in G∗ either there is a directed path from right(u) to lef t(u ) or a directed path from right(u ) to lef t(u). The ﬁrst case implies that X(right(u)) < X(lef t(u ), so that the whole of ωu is to the left of ωu ; the second case implies that the whole of ωu is to the left of ωu . This implies P1. Now consider P2, and suppose that e = (u, v) and e = (u , v ) are edges of G, and denote lef t(e) by f and lef t(e ) by f . If X(f ) = X(f ) then λe cannot intersect λe and P2 holds. Now suppose that X(f ) = X(f ); thus in G∗ there is no directed path between f and f . It follows from Lemma 46.3 that in G either there is a directed path from the sink tf of f to the source sf of f , or a directed path from the sink tf of f to the source sf of f . In the ﬁrst case we have Y (tf ) < Y (sf ). Also, since e is on f and e is on f , we have Y (v) ≤ Y (tf ) and Y (sf ) ≤ Y (u ); thus Y (v) < Y (u ) and λe cannot intersect λe . The second case is similar and so P2 holds. A similar argument shows that P3 holds. Property P4 follows form the simple observation that for any edge e = (u, v), X(lef t(u)) ≤ X(lef t(e)) ≤ X(right(u)). The drawing has dimensions maxvf ∈V ∗ X(vf ) × maxu∈V Y (u), which is O(n) × O(n). It is easy to see that each step can be implemented in linear time. Proof

© 2005 by Chapman & Hall/CRC

46-18

46.5.3

Handbook of Data Structures and Applications

Bar Visibility Representations and Layered Drawings

A graph in which the nodes are constrained to speciﬁed y coordinates, as in Figure 46.3, is called a layered graph. More precisely, a layered graph consists of a directed graph G = (V, E) as well as a topological numbering L of G. We say that L(u) is the layer of u. A drawing of G that satisﬁes the layering constraint, that is, the y coordinate of u is L(u) for each u ∈ V , is called a layered drawing. Drawing algorithms for layered graphs have been extensively explored [8]. A layered graph is planar (sometimes called h-planar) if it can be drawn with no edge crossings, subject to the layering constraint. Note that underlying the prerequisite Figure 46.3 is a planar graph; however, as a layered graph, it is not planar. The theory of planarity for layered graphs has received some attention; see [11, 13, 19, 24]. If a planar layered graph has one source and one sink, then it is a planar st-graph. Clearly the source s has L(s) = minu∈V Lu and the sink t has L(t) = maxv∈V Lv . Since the layers deﬁne a topological numbering of the graph, application of Algorithm Bar Visibility yields a visibility representation that satisﬁes the layering constraints. Further, this can be used to construct a graph drawing by using simple local transformations, illustrated in Figure 46.15.

FIGURE 46.15: Transformation from a visibility representation of a layered graph to a layered drawing.

The following theorem is immediate.

If G is a planar layered graph then we can construct a planar layered drawing of G in linear time, with the following properties:

THEOREM 46.9

• There are at most two bends in each edge. • The area is O(n) × O(n). Although Algorithm Bar Visibility produces the visibility representation with good resolution, it may not produce minimum area drawings. Lin and Eades [24] give a linear time variation on Algorithm Bar Visibility that, for a ﬁxed embedding, maximizes resolution. The algorithm works by using a topological numbering for the dual computed from a dependency relation between the edges.

© 2005 by Chapman & Hall/CRC

Drawing Graphs

46.5.4

46-19

Bar Visibility Representations for Orthogonal Drawings

An orthogonal drawing of a graph G has each vertex represented as a point and each edge represented by a polyline whose line segments are parallel to a coordinate axis. An orthogonal drawing of the 3-cube is in Figure 46.16.

FIGURE 46.16: An orthogonal drawing of the 3-cube.

It is clear that a graph that has a planar orthogonal drawing, has maximum degree of G at most 4. Conversely, one can obtain a planar orthogonal drawing of a planar graph with maximum degree at most 4 from a visibility representation by using a simple set of local transformations, described in Figure 46.17. Figure 46.16 can be obtained from Figure 46.13 by applying transformation (c) in Figure 46.17 to the source and sink, and applying transformation (d) to each other vertex. Note that the transformations involve the introduction of a few bends in each edge. The worst case is for where a transformation introduces two bends near a vertex; this may occur at each end of an edge, and thus may introduce 4 bends into an edge. If G is a planar graph then we can construct a planar orthogonal drawing of G in linear time, with the following properties:

THEOREM 46.10

• There are at most four bends in each edge. • The area is O(n) × O(n). In fact, a variation of Algorithm Visibility together with a careful application of some transformations along the lines of those in Figure 46.17 can ensure that the resulting drawing has a total of at most 2n + 4 bends, where n is the number of vertices; see [8].

46.6

Conclusion

In this Chapter we have described just a small sample of graph drawing algorithms. Notable omissions include: • Force directed methods: A graph can be used to deﬁne a system of forces. For example, we can deﬁne a Hooke’s law spring force between two adjacent vertices, and magnetic repulsion between nonadjacent vertices. A minimum energy

© 2005 by Chapman & Hall/CRC

46-20

Handbook of Data Structures and Applications

(a)

(b)

(c)

(d)

(f)

(e)

(h)

(g)

(j)

(i)

(k)

FIGURE 46.17: Local transformations to transform a visibility representation to an orthogonal drawing. conﬁguration of the graph can lead to a good drawing. For methods using the force-directed paradigm. • Clustered graph drawing methods: in practice, to handle large graphs, one needs to form clusters of the vertices to form “super-vertices”. Drawing graphs in which some vertices represent graphs is a challenging problem. • Three dimensional graph drawing methods: the widespread availability of cheap three dimensional graphics systems has lead to the investigation of graph drawing in three dimensions. • Crossing minimization methods: in this Chapter we have concentrated on planar graphs. In practice, we need to deal with non-planar graphs, by choosing a drawing with a small number of crossings.

References [1] D. Abelson, S. Hong and D. E. Taylor, A Group-Theoretic Method for Drawing Graphs

© 2005 by Chapman & Hall/CRC

Drawing Graphs

[2] [3] [4] [5]

[6] [7] [8] [9]

[10] [11]

[12] [13] [14] [15] [16]

[17] [18] [19]

[20] [21] [22] [23] [24]

46-21

Symmetrically, Graph Drawing, Proc. of GD’02, Lecture Notes in Computer Science 2528, Springer-Verlag, pp. 86-97, 2002. M. A. Armstrong, Groups and Symmetry, Springer-Verlag, 1988. C. Batini, E. Nardelli and R. Tamassia, A Layout Algorithm for Data-Flow Diagrams, IEEE Trans. Softw. Eng., SE-12, no. 4, pp. 538-546, 1986. J. A. Bondy and U. S. R. Murty, Graph Theory with Applications, MacMillan Press, London, 1977. C. Buchheim and M. J¨ unger, Detecting Symmetries by Branch and Cut, Graph Drawing, Proc. of GD’01, Lecture Notes in Computer Science 2265, Springer-Verlag, pp. 178-188, 2002. N. Chiba, T. Yamanouchi and T. Nishizeki, Linear Algorithms for Convex Drawings of Planar Graphs, Progress in Graph Theory, Academic Press, pp. 153-173, 1984. M. Chrobak and G. Kant, Convex Grid Drawings of 3-connected Planar Graphs, Int. Journal of Computational Geometry and Applications, 7(3), pp. 211-224, 1997. G. Di Battista, P. Eades, R. Tamassia and I. G. Tollis, Graph Drawing: Algorithms for the Visualization of Graphs, Prentice-Hall 1998. H. de Fraysseix, An Heuristic for Graph Symmetry Detection, Graph Drawing, Proc. of GD’99, Lecture Notes in Computer Science 1731, Springer-Verlag, pp. 276-285, Springer-Verlag, 1999. H. de Fraysseix, J. Pach and R. Pollack, How to Draw a Planar Graph on a Grid, Combinatorica, 10, pp. 41-51, 1990. P. Eades, X. Lin and R. Tamassia, An Algorithm for Drawing a Hierarchical Graph, International Journal of Computational Geometry and Applications, 6(2), pp. 145155, 1996. P. Eades and X. Lin, Spring Algorithms and Symmetry, Theoretical Computer Science, Vol. 240 No.2, pp. 379-405, 2000. P. Eades, Q. Feng, X. Lin and H. Nagamochi, Straight-Line Drawing Algorithms for Hierarchical Graphs and Clustered Graphs, Algorithmica, to appear. M. Fontet, Linear Algorithms for Testing Isomorphism of Planar Graphs, Proceedings Third Colloquium on Automata, Languages, and Programming, pp. 411-423, 1976. M. Goodrich and S. G. Kobourov (Eds.), Graph Drawing 2002, Lecture Notes in Computer Science 2528, Springer-Verlag, 2002. S. Hong, P. Eades and S. Lee, An Algorithm for Finding Geometric Automorphisms in Planar Graphs, Algorithms and Computation, Proc. of ISAAC’98, Lecture Notes in Computer Science 1533, Springer-Verlag, pp. 277-286, 1998. S. Hong, P. Eades and S. Lee, Drawing Series Parallel Digraphs Symmetrically, Computational Geometry: Theory and Applicatons 17(3-4), pp. 165-188, 2000. S. Hong, B. McKay and P. Eades, Symmetric Drawings of Triconnected Planar Graphs, Proceeding of SODA 2002, pp. 356-365, 2002. M. Junger, S. Leipert and P. Mutzel, Level Planarity Testing in Linear Time, Graph Drawing 98, Lecture Notes in Computer Science 1547, Springer-Verlag, pp. 167-182, 1999. M. Junger and P. Mutzel (Eds.), Graph Drawing Software, Series: Mathematics and Visualization, Springer-Verlag, 2003. G. Kant, Drawing Planar Graphs Using the Canonical Ordering, Algorithmica, 16, pp. 4-32, 1996. M. Kaufmann and D. Wagner (Eds.), Drawing Graphs - Methods and Models, Lecture Notes in Computer Science 2025, 2001. D. E. Knuth, Computer Drawn Flowcharts, Commun, ACM, 6, 1963. X. Lin and P. Eades, Towards Area Requirements for Drawing Hierarchically Planar

© 2005 by Chapman & Hall/CRC

46-22

Handbook of Data Structures and Applications

Graphs, Theoretical Computer Science, 292(3), pp. 679-695, 2003. [25] R. J. Lipton, D. J. Rose and R. E. Tarjan, Generalized Nested Dissection, SIAM J. Numer. Anal., 16, no. 2, pp. 346-358, 1979. [26] J. Manning and M. J. Atallah, Fast Detection and Display of Symmetry in Trees, Congressus Numerantium, 64, pp. 159-169, 1988. [27] J. Manning and M. J. Atallah, Fast Detection and Display of Symmetry in Outerplanar Graphs, Discrete Applied Mathematics, 39, pp. 13-35, 1992. [28] J. Manning, Geometric Symmetry in Graphs, Ph.D. Thesis, Purdue Univ., 1990. [29] J. Martin and C. McClure, Diagramming Techniques for Analyst and Programmers, Prentice Hall, Inc., 1985. [30] H. Purchase, Which Aesthetic Has the Greatest Eﬀect on Human Understanding, Graph Drawing, Proc. of GD’97, Lecture Notes in Computer Science 1353, SpringerVerlag, pp. 248-261, 1998. [31] R. Read, Some Applications of Computers in Graph Theory, In L.W. Beineke and R. Wilson, editors, Selected Topics in Graph Theory, chapter 15, pp. 415-444. Academic Press, 1978. [32] P. Rosenstiehl and R. E. Tarjan, Rectilinear Planar Layouts and Bipolar Orientations of Planar Graphs, Discrete Comput. Geom., 1, no. 4, pp. 342-351, 1986. [33] K. Sugiyama, Graph Drawing and Applications for Software and Knowledge Engineers, Series on Software Engineering and Knowledge Engineering - Vol. 11, World Scientiﬁc, 2002. [34] R. Tamassia and I. G. Tollis, A Uniﬁed Approach to Visibility Representations of Planar Graphs, Discrete Comput. Geom., 1, no. 4, pp. 321-341, 1986. [35] C. Thomassen, Planarity and Duality of Finite and Inﬁnite Graphs, J. of Combinatorial Theory, Series B 29, pp. 244-271, 1980. [36] W. T. Tutte, Convex Representations of Graphs, Proc. London Math. Soc., 10, pp. 304-320, 1960. [37] W. T. Tutte, How to Draw a Graph, Proc. London Math. Soc., 13, pp. 743-768, 1963. [38] K. Wagner, Bemerkungen zum Vierfarbenproblem, Jahres-bericht der Deutschen Mathematiker-Vereinigung, 46, pp. 26-32, 1936.

© 2005 by Chapman & Hall/CRC

47 Concurrent Data Structures 47.1

Designing Concurrent Data Structures . . . . . . . . . .

47-1

Performance • Blocking Techniques • Nonblocking Techniques • Complexity Measures • Correctness • Veriﬁcation Techniques • Tools of the Trade

Mark Moir Sun Microsystems Laboratories

Nir Shavit Sun Microsystems Laboratories

47.2 47.3 47.4 47.5 47.6 47.7 47.8 47.9

Shared Counters and Fetch-and-φ Structures . . Stacks and Queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Linked Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hash Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Search Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Priority Queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

47-12 47-14 47-17 47-18 47-19 47-20 47-22 47-23

The proliferation of commercial shared-memory multiprocessor machines has brought about signiﬁcant changes in the art of concurrent programming. Given current trends towards lowcost chip multithreading (CMT), such machines are bound to become ever more widespread. Shared-memory multiprocessors are systems that concurrently execute multiple threads of computation which communicate and synchronize through data structures in shared memory. The eﬃciency of these data structures is crucial to performance, yet designing eﬀective data structures for multiprocessor machines is an art currently mastered by few. By most accounts, concurrent data structures are far more diﬃcult to design than sequential ones because threads executing concurrently may interleave their steps in many ways, each with a diﬀerent and potentially unexpected outcome. This requires designers to modify the way they think about computation, to understand new design methodologies, and to adopt a new collection of programming tools. Furthermore, new challenges arise in designing scalable concurrent data structures that continue to perform well as machines that execute more and more concurrent threads become available. This chapter provides an overview of the challenges involved in designing concurrent data structures, and a summary of relevant work for some important data structure classes. Our summary is by no means comprehensive; instead, we have chosen popular data structures that illustrate key design issues, and hope that we have provided suﬃcient background and intuition to allow the interested reader to approach the literature we do not survey.

47.1

Designing Concurrent Data Structures

Several features of shared-memory multiprocessors make concurrent data structures significantly more diﬃcult to design and to verify as correct than their sequential counterparts.

47-1

© 2005 by Chapman & Hall/CRC

47-2

Handbook of Data Structures and Applications oldval = X; X = oldval + 1; return oldval;

acquire(Lock); oldval = X; X = oldval + 1; release(Lock); return oldval;

FIGURE 47.1: Code fragments for sequential and lock-based fetch-and-inc operations. The primary source of this additional diﬃculty is concurrency: Because threads are executed concurrently on diﬀerent processors, and are subject to operating system scheduling decisions, page faults, interrupts, etc., we must think of the computation as completely asynchronous, so that the steps of diﬀerent threads can be interleaved arbitrarily. This signiﬁcantly complicates the task of designing correct concurrent data structures. Designing concurrent data structures for multiprocessor systems also provides numerous challenges with respect to performance and scalability. On today’s machines, the layout of processors and memory, the layout of data in memory, the communication load on the various elements of the multiprocessor architecture all inﬂuence performance. Furthermore, the issues of correctness and performance are closely tied to each other: algorithmic enhancements that seek to improve performance often make it more diﬃcult to design and verify a correct data structure implementation. The following example illustrates various features of multiprocessors that aﬀect concurrent data structure design. Suppose we wish to implement a shared counter data structure that supports a fetch-and-inc operation that adds one to the counter and returns the value of the counter immediately before the increment. A trivial sequential implementation of the fetch-and-inc operation contains code like that shown on the left in Figure 47.1:∗ If we allow concurrent invocations of the fetch-and-inc operation by multiple threads, this implementation does not behave correctly. To see why, observe that most compilers will translate this source code into machine instructions that load X into a register, then add one to that register, then store that register back to X. Suppose that the counter is initially 0, and two fetch-and-inc operations execute on diﬀerent processors concurrently. Then there is a risk that both operations read 0 from X, and therefore both store back 1 and return 0. This is clearly incorrect: one of the operations should return 1. The incorrect behavior described above results from a “bad” interleaving of the steps of the two fetch-and-inc operations. A natural and common way to prevent such interleavings is to use a mutual exclusion lock (also known as a mutex or a lock ). A lock is a construct that, at any point in time, is unowned or is owned by a single thread. If a thread t1 wishes to acquire ownership of a lock that is already owned by another thread t2 , then t1 must wait until t2 releases ownership of the lock. We can obtain a correct sequential implementation of the fetch-and-inc operation by using a lock as shown on the right in Figure 47.1. With this arrangement, we prevent the bad interleavings by preventing all interleavings. While it is easy to achieve a correct shared counter this way, this simplicity comes at a price: Locking introduces a host of problems related to both performance and software engineering.

∗ Throughout our examples, we ignore the fact that, in reality, integers are represented by a ﬁxed number of bits, and will therefore eventually “wrap around” to zero.

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47.1.1

47-3

Performance

The speedup of an application when run on P processors is the ratio of its execution time on a single processor to its execution time on P processors. It is a measure of how eﬀectively the application is utilizing the machine it is running on. Ideally, we want linear speedup: we would like to achieve a speedup of P when using P processors. Data structures whose speedup grows with P are called scalable. In designing scalable data structures we must take care: naive approaches to synchronization can severely undermine scalability. Returning to the lock-based counter, observe that the lock introduces a sequential bottleneck : at any point in time, at most one fetch-and-inc operation is doing useful work, i.e. incrementing the variable X. Such sequential bottlenecks can have a surprising eﬀect on the speedup one can achieve. The eﬀect of the sequentially executed parts of the code on performance is illustrated by a simple formula based on Amdahl’s law [109]. Let b be the fraction of the program that is subject to a sequential bottleneck. If the program takes 1 time unit when executed on a single processor, then on a P -way multiprocessor the sequential part takes b time units, and the concurrent part takes (1 − b)/P time units in the best case, so the speedup S is at most 1/(b + (1 − b)/P ). This implies that if just 10% of our application is subject to a sequential bottleneck, the best possible speedup we can achieve on a 10-way machine is about 5.3: we are running the application at half of the machine’s capacity. Reducing the number and length of sequentially executed code sections is thus crucial to performance. In the context of locking, this means reducing the number of locks acquired, and reducing lock granularity, a measure of the number of instructions executed while holding a lock. A second problem with our simple counter implementation is that it suﬀers from memory contention: an overhead in traﬃc in the underlying hardware as a result of multiple threads concurrently attempting to access the same locations in memory. Contention can be appreciated only by understanding some aspects of common shared-memory multiprocessor architectures. If the lock protecting our counter is implemented in a single memory location, as many simple locks are, then in order to acquire the lock, a thread must repeatedly attempt to modify that location. On a cache-coherent multiprocessor† for example, exclusive ownership of the cache line containing the lock must be repeatedly transferred from one processor to another; this results in long waiting times for each attempt to modify the location, and is further exacerbated by the additional memory traﬃc associated with unsuccessful attempts to acquire the lock. In Section 47.1.7, we discuss lock implementations that are designed to avoid such problems for various types of shared memory architectures. A third problem with our lock-based implementation is that, if the thread that currently holds the lock is delayed, then all other threads attempting to access the counter are also delayed. This phenomenon is called blocking, and is particularly problematic in multiprogrammed systems, in which there are multiple threads per processor and the operating system can preempt a thread while it holds the lock. For many data structures, this diﬃculty can be overcome by devising nonblocking algorithms in which the delay of a thread does not cause the delay of others. By deﬁnition, these algorithms cannot use locks. Below we continue with our shared counter example, discussing blocking and nonblocking techniques separately; we introduce more issues related to performance as they arise.

† A cache-coherent multiprocessor is one in which processors have local caches that are updated by hardware in order to keep them consistent with the latest values stored.

© 2005 by Chapman & Hall/CRC

47-4

47.1.2

Handbook of Data Structures and Applications

Blocking Techniques

In many data structures, the undesirable eﬀects of memory contention and sequential bottlenecks discussed above can be reduced by using a ﬁne-grained locking scheme. In ﬁnegrained locking, we use multiple locks of small granularity to protect diﬀerent parts of the data structure. The goal is to allow concurrent operations to proceed in parallel when they do not access the same parts of the data structure. This approach can also help to avoid excessive contention for individual memory locations. For some data structures, this happens naturally; for example, in a hash table, operations concerning values that hash to diﬀerent buckets naturally access diﬀerent parts of the data structure. For other structures, such as the lock-based shared counter, it is less clear how contention and sequential bottlenecks can be reduced because—abstractly—all operations modify the same part of the data structure. One approach to dealing with contention is to spread operations out in time, so that each operation accesses the counter in a separate time interval from the others. One widely used technique for doing so is called backoﬀ [3]. However, even with reduced contention, our lock-based shared counter still lacks parallelism, and is therefore not scalable. Fortunately, more sophisticated techniques can improve scalability. One approach, known as a combining tree [36, 37, 51, 137], can help implement a scalable counter. This approach employs a binary tree with one leaf per thread. The root of the tree contains the actual counter value, and the other internal nodes of the tree are used to coordinate access to the root. The key idea is that threads climb the tree from the leaves towards the root, attempting to “combine” with other concurrent operations. Every time the operations of two threads are combined in an internal node, one of those threads—call it the loser—simply waits at that node until a return value is delivered to it. The other thread—the winner—proceeds towards the root carrying the sum of all the operations that have combined in the subtree rooted at that node; a winner thread that reaches the root of the tree adds its sum to the counter in a single addition, thereby eﬀecting the increments of all of the combined operations. It then descends the tree distributing a return value to each waiting loser thread with which it previously combined. These return values are distributed so that the eﬀect is as if all of the increment operations were executed one after the other at the moment the root counter was modiﬁed. The technique losers employ while waiting for winners in the combining tree is crucial to its performance. A loser operation waits by repeatedly reading a memory location in a tree node; this is called spinning. An important consequence in a cache-coherent multiprocessor is that this location will reside in the local cache of the processor executing the loser operation until the winner operation reports the result. This means that the waiting loser does not generate any unnecessary memory traﬃc that may slow down the winner’s performance. This kind of waiting is called local spinning, and has been shown to be crucial for scalable performance [96]. In so-called non-uniform memory access (NUMA) architectures, processors can access their local portions of shared memory faster than they can access the shared memory portions of other processors. In such architectures, data layout —the way nodes of the combining tree are placed in memory—can have a signiﬁcant impact on performance. Performance can be improved by locating the leaves of the tree near the processors running the threads that own them. (We assume here that threads are statically bound to processors.) Data layout issues also aﬀect the design of concurrent data structures for cache-coherent multiprocessors. Recall that one of the goals of the combining tree is to reduce contention for individual memory locations in order to improve performance. However, because cachecoherent multiprocessors manage memory in cache-line-sized chunks, if two threads are accessing diﬀerent memory locations that happen to fall into the same cache line, performance

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-5

suﬀers just as if they had been accessing the same memory location. This phenomenon is known as false sharing, and is a common source of perplexing performance problems. By reducing contention for individual memory locations, reducing memory traﬃc by using local spinning, and allowing operations to proceed in parallel, counters implemented using combining trees scale with the number of concurrent threads much better than the single lock version does [51]. If all threads manage to repeatedly combine, then a tree of width P will allow P threads to return P values after every O(log P ) operations required to ascend and descend the tree, oﬀering a speedup of O(P/ log P ) (but see Section 47.1.4). Despite the advantages of the combining tree approach, it also has several disadvantages. It requires a known bound P on the number of threads that access the counter, and it requires O(P ) space. While it provides better throughout under heavy loads, that is, when accessed by many concurrent threads, its best-case performance under low loads is poor: It must still traverse O(log P ) nodes in the tree, whereas a fetch-and-inc operation of the single-lock-based counter completes in constant time. Moreover, if a thread fails to combine because it arrived at a node immediately after a winner left it on its way up the tree, then it must wait until the winner returns before it can continue its own ascent up the tree. The coordination among ascending winners, losers, and ascending late threads, if handled incorrectly, may lead to deadlocks: threads may block each other in a cyclic fashion such that none ever makes progress. Avoiding deadlocks signiﬁcantly complicates the task of designing correct and eﬃcient implementations of blocking concurrent data structures. In summary, blocking data structures can provide powerful and eﬃcient implementations if a good balance can be struck between using enough blocking to maintain correctness, while minimizing blocking in order to allow concurrent operations to proceed in parallel.

47.1.3

Nonblocking Techniques

As discussed earlier, nonblocking implementations aim to overcome the various problems associated with the use of locks. To formalize this idea, various nonblocking progress conditions—such as wait-freedom [49, 82], lock-freedom [49], and obstruction-freedom [53]—have been considered in the literature. A wait-free operation is guaranteed to complete after a ﬁnite number of its own steps, regardless of the timing behavior of other operations. A lock-free operation guarantees that after a ﬁnite number of its own steps, some operation completes. An obstruction-free operation is guaranteed to complete within a ﬁnite number of its own steps after it stops encountering interference from other operations. Clearly, wait-freedom is a stronger condition than lock-freedom, and lock-freedom in turn is stronger than obstruction-freedom. However, all of these conditions are strong enough to preclude the use of blocking constructs such as locks.‡ While stronger progress conditions seem desirable, implementations that make weaker guarantees are generally simpler, more eﬃcient in the common case, and easier to design and to verify as correct. In practice, we can compensate for the weaker progress conditions by employing backoﬀ [3] or more sophisticated contention management techniques [54]. Let us return to our shared counter. It follows easily from results of Fischer et al. [32] (extended to shared memory by Herlihy [49] and Loui and Abu-Amara [92]) that such a shared counter cannot be implemented in a lock-free (or wait-free) manner using only load and

‡ We use the term “nonblocking” broadly to include all progress conditions requiring that the failure or indeﬁnite delay of a thread cannot prevent other threads from making progress, rather than as a synonym for “lock-free”, as some authors prefer.

© 2005 by Chapman & Hall/CRC

47-6

Handbook of Data Structures and Applications bool CAS(L, E, N) { atomically { if (*L == E) { *L = N; return true; } else return false; } } FIGURE 47.2: The semantics of the CAS operation.

store instructions to access memory. These results show that, in any proposed implementation, a bad interleaving of operations can cause incorrect behaviour. These bad interleavings are possible because the load and store are separate operations. This problem can be overcome by using a hardware operation that atomically combines a load and a store. Indeed, all modern multiprocessors provide such synchronization instructions, the most common of which are compare-and-swap (CAS) [61, 63, 136] and load-linked/store-conditional (LL/SC) [62, 69, 131]. The semantics of the CAS instruction is shown in Figure 47.2. For purposes of illustration, we assume an atomically keyword which requires the code block it labels to be executed atomically, that is, so that that no thread can observe a state in which the code block has been partially executed. The CAS operation atomically loads from a memory location, compares the value read to an expected value, and stores a new value to the location if the comparison succeeds. Herlihy [49] showed that instructions such as CAS and LL/SC are universal : there exists a wait-free implementation for any concurrent data structure in a system that supports such instructions. A simple lock-free counter can be implemented using CAS. The idea is to perform the fetch-and-inc by loading the counter’s value and to then use CAS to atomically change the counter value to a value greater by one than the value read. The CAS instruction fails to increment the counter only if it changes between the load and the CAS. In this case, the operation can retry, as the failing CAS had no eﬀect. Because the CAS fails only as a result of another fetch-and-inc operation succeeding, the implementation is lock-free. However, it is not wait-free because a single fetch-and-inc operation can repeatedly fail its CAS. The above example illustrates an optimistic approach to synchronization: the fetch-and-inc operation completes quickly in the hopefully common case in which it does not encounter interference from a concurrent operation, but must employ more expensive techniques under contention (e.g., backoﬀ). While the lock-free counter described above is simple, it has many of the same disadvantages that the original counter based on a single lock has: a sequential bottleneck and high contention for a single location. It is natural to attempt to apply similar techniques as those described above in order to improve the performance of this simple implementation. However, it is usually more diﬃcult to incorporate such improvements into nonblocking implementations of concurrent data structures than blocking ones. Roughly, the reason for this is that a thread can use a lock to prevent other threads from “interfering” while it performs some sequence of actions. Without locks, we have to design our implementations to be correct despite the actions of concurrent operations; in current architectures, this often leads to the use of complicated and expensive techniques that undermine the improvements we are trying to incorporate. As discussed further in Section 47.1.7, transactional mechanisms make it much easier to design and modify eﬃcient implementations of complex concurrent data structures. However, hardware support for such mechanisms does not yet exist.

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47.1.4

47-7

Complexity Measures

A wide body of research is directed at analyzing the asymptotic complexity of concurrent data structures and algorithms in idealized models such as parallel random access machines [35, 121, 134]. However, there is less work on modeling such data structures in a realistic multiprocessor setting. There are many reasons for this, most of which have to do with the interplay of the architectural features of the hardware and the asynchronous execution of threads. Consider the combining tree example. Though we argued a speedup of O(P/ log P ) by counting instructions, this is not reﬂected in empirical studies [51, 128]. Real-world behavior is dominated by other features discussed above, such as cost of contention, cache behavior, cost of universal synchronization operations (e.g. CAS), arrival rates of requests, eﬀects of backoﬀ delays, layout of the data structure in memory, and so on. These factors are hard to quantify in a single precise model spanning all current architectures. Complexity measures that capture some of these aspects have been proposed by Dwork et al. [28] and by Anderson and Yang [7]. While these measures provide useful insight into algorithm design, they cannot accurately capture the eﬀects of all of the factors listed above. As a result, concurrent data structure designers compare their designs empirically by running them using micro-benchmarks on real machines and simulated architectures [9, 51, 96, 102]. In the remainder of this chapter, we generally qualify data structures based on their empirically observed behavior and use simple complexity arguments only to aid intuition.

47.1.5

Correctness

It is easy to see that the behavior of the simple lock-based counter is “the same” as that of the sequential implementation. However, it is signiﬁcantly more diﬃcult to see this is also true for the combining tree. In general, concurrent data structure implementations are often subtle, and incorrect implementations are not uncommon. Therefore, it is important to be able to state and prove rigorously that a particular design correctly implements the required concurrent data structure. We cannot hope to achieve this without a precise way of specifying what “correct” means. Data structure speciﬁcations are generally easier for sequential data structures. For example, we can specify the semantics of a sequential data structure by choosing a set of states, and providing a transition function that takes as arguments a state, an operation name and arguments to the operation, and returns a new state and a return value for the operation. Together with a designated initial state, the transition function speciﬁes all acceptable sequences of operations on the data structure. The sequential semantics of the counter is speciﬁed as follows: The set of states for the counter is the set of integers, and the initial state is 0. The transition function for the fetch-and-inc operation adds one to the old state to obtain the new state, and the return value is the old state of the counter. Operations on a sequential data structure are executed one-at-a-time in order, and we simply require that the resulting sequence of operations respects the sequential semantics speciﬁed as discussed above. However, with concurrent data structures, operations are not necessarily totally ordered. Correctness conditions for concurrent data structures generally require that some total order of the operations exists that respects the sequential semantics. Diﬀerent conditions are distinguished by their diﬀerent requirements on this total ordering. A common condition is Lamport’s sequential consistency [80], which requires that the total order preserves the order of operations executed by each thread. Sequential consistency has a drawback from the software engineering perspective: a data structure implemented using sequentially consistent components may not be sequentially consistent itself. A natural and widely used correctness condition that overcomes this problem is Herlihy

© 2005 by Chapman & Hall/CRC

47-8

Handbook of Data Structures and Applications

and Wing’s linearizability [57], a variation on the serializability [16] condition used for database transactions. Linearizability requires two properties: (1) that the data structure be sequentially consistent, and (2) that the total ordering which makes it sequentially consistent respect the real-time ordering among the operations in the execution. Respecting the realtime ordering means that if an operation O1 ﬁnishes execution before another operation O2 begins (so the operations are not concurrent with each other), then O1 must be ordered before O2 . Another way of thinking of this condition is that it requires us to be able to identify a distinct point within each operation’s execution interval, called its linearization point , such that if we order the operations according to the order of their linearization points, the resulting order obeys the desired sequential semantics. It is easy to see that the counter implementation based on a single lock is linearizable. The state of the counter is always stored in the variable X. We deﬁne the linearization point of each fetch-and-inc operation as the point at which it stores its incremented value to X. The linearizability argument for the CAS-based lock-free implementation is similarly simple, except that we use the semantics of the CAS instruction, rather than reasoning about the lock, to conclude that the counter is incremented by one each time it is modiﬁed. For the combining tree, it is signiﬁcantly more diﬃcult to see that the implementation is linearizable because the state of the counter is incremented by more than one at a time, and because the increment for one fetch-and-inc operation may in fact be performed by another operation with which it has combined. We deﬁne the linearization points of fetch-and-inc operations on the combining-tree-based counter as follows. When a winner thread reaches the root of the tree and adds its accumulated value to the counter, we linearize each of the operations with which it has combined in sequence immediately after that point. The operations are linearized in the order of the return values that are subsequently distributed to those operations. While a detailed linearizability proof is beyond the scope of our presentation, it should be clear from this discussion that rigorous correctness proofs for even simple concurrent data structures can be quite challenging. The intuitive appeal and modularity of linearizability makes it a popular correctness condition, and most of the concurrent data structure implementations we discuss in the remainder of this chapter are linearizable. However, in some cases, performance and scalability can be improved by satisfying a weaker correctness condition. For example, the quiescent consistency condition [10] drops the requirement that the total ordering of operations respects the real-time order, but requires that every operation executed after a quiescent state—one in which no operations are in progress—must be ordered after every operation executed before that quiescent state. Whether an implementation satisfying such a weak condition is useful is application-dependent. In contrast, a linearizable implementation is always usable, because designers can view it as atomic.

47.1.6

Veriﬁcation Techniques

In general, to achieve a rigorous correctness proof for a concurrent data structure implementation, we need mathematical machinery for specifying correctness requirements, accurately modeling a concurrent data structure implementation, and ensuring that a proof that the implementation is correct is complete and accurate. Most linearizability arguments in the literature treat at least some of this machinery informally, and as a result, it is easy to miss cases, make incorrect inferences, etc. Rigorous proofs inevitably contain an inordinate amount of mundane detail about trivial properties, making them tedious to write and to read. Therefore, computer-assisted methods for verifying implementations are required. One approach is to use a theorem prover to prove a series of assertions which together imply that an implementation is correct. Another approach is to use model checking tools,

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures void acquire(Lock *lock) { int delay = MIN_DELAY; while (true) { if (CAS(lock,UNOWNED,OWNED)) return; sleep(random() % delay); if (delay < MAX_DELAY) delay = 2 * delay; } }

47-9

void release(Lock *lock) { *lock = UNOWNED; }

FIGURE 47.3: Exponential backoﬀ lock. which exhaustively check all possible executions of an implementation to ensure that each one meets speciﬁed correctness conditions. The theorem proving approach usually requires signiﬁcant human insight, while model checking is limited by the number of states of an implementation that can be explored.

47.1.7

Tools of the Trade

Below we discuss three key types of tools one can use in designing concurrent data structures: locks, barriers, and transactional synchronization mechanisms. Locks and barriers are traditional low-level synchronization mechanisms that are used to restrict certain interleavings, making it easier to reason about implementations based on them. Transactional mechanisms seek to hide the tricky details of concurrency from programmers, allowing them to think in a more traditional sequential way. Locks

As discussed earlier, locks are used to guarantee mutually exclusive access to (parts of) a data structure, in order to avoid “bad” interleavings. A key issue in designing a lock is what action to take when trying to acquire a lock already held by another thread. On uniprocessors, the only sensible option is to yield the processor to another thread. However, in multiprocessors, it may make sense to repeatedly attempt to acquire the lock, because the lock may soon be released by a thread executing on another processor. Locks based on this technique are called spinlocks. The choice between blocking and spinning is often a diﬃcult one because it is hard to predict how long the lock will be held. When locks are supported directly by operating systems or threads packages, information such as whether the lock-holder is currently running can be used in making this decision. A simple spinlock repeatedly uses a synchronization primitive such as compare-and-swap to atomically change the lock from unowned to owned. As mentioned earlier, if locks are not designed carefully, such spinning can cause heavy contention for the lock, which can have a severe impact on performance. A common way to reduce such contention is to use exponential backoﬀ [3]. In this approach, which is illustrated in Figure 47.3, a thread that is unsuccessful in acquiring the lock waits some time before retrying; repeated failures cause longer waiting times, with the idea that threads will “spread themselves out” in time, resulting in lower contention and less memory traﬃc due to failed attempts. Exponential backoﬀ has the disadvantage that the lock can be unowned, but all threads attempting to acquire it have backed oﬀ too far, so none of them is making progress. One way to overcome this is to have threads form a queue and have each thread that releases the lock pass ownership of the lock to the next queued thread. Locks based on this approach

© 2005 by Chapman & Hall/CRC

47-10

Handbook of Data Structures and Applications

are called queuelocks. Anderson [8] and Graunke and Thakkar [38] introduce array-based queuelocks, and these implementations are improved upon by the list-based MCS queue locks of Mellor-Crummey and Scott [96] and the CLH queue locks of Craig and Landin and Hagersten [25, 93]. Threads using CLH locks form a virtual linked list of nodes, each containing a done ﬂag; a thread enters the critical section only after the done ﬂag of the node preceding its own node in the list is raised. The lock object has a pointer to the node at the tail of the list, the last one to join it. To acquire the lock, a thread creates a node, sets its done ﬂag to false indicate that it has not yet released the critical section, and uses a synchronization primitive such as CAS to place its own node at the tail of the list while determining the node of its predecessor. It then spins on the done ﬂag of the predecessor node. Note that each thread spins on a diﬀerent memory location. Thus, in a cache-based architecture, when a thread sets its done ﬂag to inform the next thread in the queue that it can enter the critical section, the done ﬂags on which all other threads are spinning are not modiﬁed, so those threads continue to spin on a local cache line, and do not produce additional memory traﬃc. This signiﬁcantly reduces contention and improves scalability in such systems. However, if this algorithm is used in a non-coherent NUMA machine, threads will likely have to spin on remote memory locations, again causing excessive memory traﬃc. The MCS queuelock [96] overcomes this problem by having each thread spin on a done ﬂag in its own node. This way, nodes can be allocated in local memory, eliminating the problem. There are several variations on standard locks that are of interest to the data structure designer in some circumstances. The queuelock algorithms discussed above have more advanced abortable versions that allow threads to give up on waiting to acquire the lock, for example, if they are delayed beyond some limit in a real-time application [122, 124], or if they need to recover from deadlock. The algorithms of [122] provide an abort that is nonblocking. Finally, [102] presents preemption-safe locks, which attempt to reduce the negative performance eﬀects of preemption by ensuring that a thread that is in the queue but preempted does not prevent the lock from being granted to another running thread. In many data structures it is desirable to have locks that allow concurrent readers. Such reader-writer locks allow threads that only read data in the critical section (but do not modify it) to access the critical section exclusively from the writers but concurrently with each other. Various algorithms have been suggested for this problem. The reader-writer queuelock algorithms of Mellor-Crummey and Scott [97] are based on MCS queuelocks and use read counters and a special pointer to writer nodes. In [75] a version of these algorithms is presented in which readers remove themselves from the lock’s queue. This is done by keeping a doubly-linked list of queued nodes, each having its own simple “mini-lock.” Readers remove themselves from the queuelock list by acquiring mini-locks of their neighboring nodes and redirecting the pointers of the doubly-linked list. The above-mentioned real-time queuelock algorithms of [122] provide a similar ability without locking nodes. The reader-writer lock approach can be extended to arbitrarily many operation types through a construct called group mutual exclusion or room synchronization. The idea is that operations are partitioned into groups, such that operations in the same group can execute concurrently with each other, but operations in diﬀerent groups must not. An interesting application of this approach separates push and pop operations on a stack into diﬀerent groups, allowing signiﬁcant simpliﬁcations to the implementations of those operations because they do not have to deal with concurrent operations of diﬀerent types [18]. Group mutual exclusion was introduced by Joung [68]. Implementations based on mutual exclusion locks or fetch-and-inc counters appear in [18, 70]. More complete and detailed surveys of the literature on locks can be found in [6, 116].

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-11

Barriers

A barrier is a mechanism that collectively halts threads at a given point in their code, and allows them to proceed only when all threads have arrived at that point. The use of barriers arises whenever access to a data structure or application is layered into phases whose execution should not overlap in time. For example, repeated iterations of a numerical algorithm that converges by iterating a computation on the same data structure or the marking and sweeping phases of a parallel garbage collector. One simple way to implement a barrier is to use a counter that is initialized to the total number of threads: Each thread decrements the counter upon reaching the barrier, and then spins, waiting for the counter to become zero before proceeding. Even if we use the techniques discussed earlier to implement a scalable counter, this approach still has the problem that waiting threads produce contention. For this reason, specialized barrier implementations have been developed that arrange for each thread to spin on a diﬀerent location [21, 48, 123]. Alternatively, a barrier can be implemented using a diﬀusing computation tree in the style of Dijkstra and Scholten [27]. In this approach, each thread is the owner of one node in a binary tree. Each thread awaits the arrival of its children, then notiﬁes its parent that it has arrived. Once all threads have arrived, the root of the tree releases all threads by disseminating the release information down the tree. Transactional Synchronization Mechanisms

A key use of locks in designing concurrent data structures is to allow threads to modify multiple memory locations atomically, so that no thread can observe partial results of an update to the locations. Transactional synchronization mechanisms are tools that allow the programmer to treat sections of code that access multiple memory locations as a single atomic step. This substantially simpliﬁes the design of correct concurrent data structures because it relieves the programmer of the burden of deciding which locks should be held for which memory accesses and of preventing deadlock. As an example of the beneﬁts of transactional synchronization, consider Figure 47.4, which shows a concurrent queue implementation achieved by requiring operations of a simple sequential implementation to be executed atomically. Such atomicity could be ensured either by using a global mutual exclusion lock, or via a transactional mechanism. However, the lock-based approach prevents concurrent enqueue and dequeue operations from executing in parallel. In contrast, a good transactional mechanism will allow them to do so in all but the empty state because when the queue is not empty, concurrent enqueue and dequeue operations do not access any memory locations in common. The use of transactional mechanisms for implementing concurrent data structures is inspired by the widespread use of transactions in database systems. However, the problem of supporting transactions over shared memory locations is diﬀerent from supporting transactions over databases elements stored on disk. Thus, more lightweight support for transactions is possible in this setting. Kung and Robinson’s optimistic concurrency control (OCC) [79] is one example of a transactional mechanism for concurrent data structures. OCC uses a global lock, which is held only for a short time at the end of a transaction. Nonetheless, the lock is a sequential bottleneck, which has a negative impact on scalability. Ideally, transactions should be supported without the use of locks, and transactions that access disjoint sets of memory locations should not synchronize with each other at all. Transactional support for multiprocessor synchronization was originally suggested by Herlihy and Moss, who also proposed a hardware-based transactional memory mechanism for supporting it [55]. Recent extensions to this idea include lock elision [113, 114], in which the

© 2005 by Chapman & Hall/CRC

47-12

Handbook of Data Structures and Applications

typedef struct qnode_s { qnode_s *next; valuetype value; } qnode_t; shared variables: // initially null qnode_t *head, *tail; void enqueue(qnode_t *n) { atomically { if (tail == null) tail = head = n; else { tail->next = n; tail = n; } } }

qnode_t * dequeue() { atomically { if (head == null) return null; else { n = head; head = head->next; if (head == null) tail = null; return n; } } }

FIGURE 47.4: A concurrent shared FIFO queue. hardware automatically translates critical sections into transactions, with the beneﬁt that two critical sections that do not in fact conﬂict with each other can be executed in parallel. For example, lock elision could allow concurrent enqueue and dequeue operations of the above queue implementation to execute in parallel, even if the atomicity is implemented using locks. To date, hardware support for transactional memory has not been built. Various forms of software transactional memory have been proposed by Shavit and Touitou [127], Harris et al. [44], Herlihy et al. [54], and Harris and Fraser [43]. Transactional mechanisms can easily be used to implement most concurrent data structures, and when eﬃcient and robust transactional mechanisms become widespread, this will likely be the preferred method. In the following sections, we mention implementations based on transactional mechanisms only when no direct implementation is known.

47.2

Shared Counters and Fetch-and-φ Structures

Counters have been widely studied as part of a broader class of fetch-and-φ coordination structures, which support operations that fetch the current value of a location and apply some function from an allowable set φ to its contents. As discussed earlier, simple lockbased implementations of fetch-and-φ structures such as counters suﬀer from contention and sequential bottlenecks. Below we describe some approaches to overcoming these problems. Combining

The combining tree technique was originally invented by Gottlieb et al. [37] to be used in the hardware switches of processor-to-memory networks. In Section 47.1.2 we discussed a software version of this technique, ﬁrst described by Goodman et al. [36] and Yew et al. [137], for implementing a fetch-and-add counter. (The algorithm in [137] has a slight bug; see [51].) This technique can also be used to implement fetch-and-φ operations for a variety of sets of combinable operations, including arithmetic and boolean operations, and synchronization operations such as load, store, swap, test-and-set, etc. [76]. As explained earlier, scalability is achieved by sizing the tree such that the there is one leaf node per thread. Under maximal load, the throughput of such a tree is proportional to O(P/ log P ) operations per time unit, oﬀering a signiﬁcant speedup. Though it is pos-

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures 4

47-13 1

2

2 4

1

5

2

2 5

3

1

1 3

4

5 3

3 4

5

y0

1

y1

2

y2

3

y3

4

5

FIGURE 47.5: A bitonic counting network of width four. sible to construct trees with fan-out greater than two in order to reduce tree depth, that would sacriﬁce the simplicity of the nodes and, as shown by Shavit and Zemach [130], will most likely result in reduced performance. Moreover, Herlihy et al. [51] have shown that combining trees are extremely sensitive to changes in the arrival rate of requests: as the load decreases, threads must still pay the price of traversing the tree while attempting to combine, but the likelihood of combining is reduced because of the reduced load. Shavit and Zemach overcome the drawbacks of the static combining tree structures by introducing combining funnels [130]. A combining funnel is a linearizable fetch-and-φ structure that allows combining trees to form dynamically, adapting its overall size based on load patterns. It is composed of a (typically small) number of combining layers. Each such layer is implemented as a collision array in memory. Threads pass through the funnel layer by layer, from the ﬁrst (widest) to the last (narrowest). These layers are used by threads to locate each other and combine their operations. As threads pass through a layer, they read a thread ID from a randomly chosen array element, and write their own in its place. They then attempt to combine with the thread whose ID they read. A successful combination allows threads to exchange information, allowing some to continue to the next layer, and others to await their return with the resulting value. Combining funnels can also support the elimination technique (described in Section 47.3) to allow two operations to complete without accessing the central data structure in some cases. Counting Networks

Combining structures provide scalable and linearizable fetch-and-φ operations. However, they are blocking. An alternative approach to parallelizing a counter that overcomes this problem is to have multiple counters instead of a single one, and to use a counting network to coordinate access to the separate counters so as to avoid problems such as duplicated or omitted values. Counting networks, introduced by Aspnes et al. [10], are a class of data structures for implementing, in a highly concurrent and nonblocking fashion, a restricted class of fetch-and-φ operations, the most important of which is fetch-and-inc. Counting networks, like sorting networks [24], are acyclic networks constructed from simple building blocks called balancers. In its simplest form, a balancer is a computing element with two input wires and two output wires. Tokens arrive on the balancer’s input wires at arbitrary times, and are output on its output wires in a balanced way. Given a stream of input tokens, a balancer alternates sending one token to the top output wire, and one to the bottom, eﬀectively balancing the number of tokens between the two wires. We can wire balancers together to form a network. The width of a network is its number of output wires (wires that are not connected to an input of any balancer). Let y0 , .., yw−1 respectively represent the number of tokens output on each of the output wires of a network of width w. A counting network is an acyclic network of balancers whose outputs satisfy the following step property:

© 2005 by Chapman & Hall/CRC

47-14

Handbook of Data Structures and Applications In any quiescent state, 0 ≤ yi − yj ≤ 1 for any i < j.

Figure 47.5 shows a sequence of tokens traversing a counting network of width four based on Batcher’s Bitonic sorting network structure [13]. The horizontal lines are wires and the vertical lines are balancers, each connected to two input and output wires at the dotted points. Tokens (numbered 1 through 5) traverse the balancers starting on arbitrary input wires and accumulate on speciﬁc output wires meeting the desired step-property. Aspnes et al. [10] have shown that every counting network has a layout isomorphic to a sorting network, but not every sorting network layout is isomorphic to a counting network. On a shared memory multiprocessor, balancers are records, and wires are pointers from one record to another. Threads performing increment operations traverse the data structure from some input wire (either preassigned or chosen at random) to some output wire, each time shepherding a new token through the network. The counting network distributes input tokens to output wires while maintaining the step property stated above. Counting is done by adding a local counter to each output wire, so that tokens coming out of output wire i are assigned numbers i, i + w, . . . , i + (yi − 1)w. Because threads are distributed across the counting network, there is little contention on the balancers, and the even distribution on the output wires lowers the load on the shared counters. However, as shown by Shavit and Zemach [128], the dynamic patterns through the networks increase cache miss rates and make optimized layout almost impossible. There is a signiﬁcant body of literature on counting networks, much of which is surveyed by Herlihy and Busch [22]. An empirical comparison among various counting techniques can be found in [51]. Aharonson and Attiya [4] and Felten et al. [31] study counting networks with arbitrary fan-in and fan-out. Shavit and Touitou [126] show how to perform decrements on counting network counters by introducing the notion of “anti-tokens” and elimination. Busch and Mavronicolas [23] provide a combinatorial classiﬁcation of the various properties of counting networks. Randomized counting networks are introduced by Aiello et al. [5] and fault-tolerant networks are presented by Riedel and Bruck [117]. The classical counting network structures in the literature are lock-free but not linearizable, they are only quiescently consistent. Herlihy et al. [56] show the tradeoﬀs involved in making counting networks linearizable. Klugerman and Plaxton present an optimal log w-depth counting network [72]. However, this construction is not practical, and all practical counting network implementations have log2 w depth. Shavit and Zemach introduce diﬀracting trees [128], improved counting networks made of balancers with one input and two output wires laid out as a binary tree. The simple balancers of the counting network are replaced by more sophisticated diﬀracting balancers that can withstand high loads by using a randomized collision array approach, yielding lower depth counting networks with signiﬁcantly improved throughput. An adaptive diﬀracting tree that adapts its size to load is presented in [26].

47.3

Stacks and Queues

Stacks and queues are among the simplest sequential data structures. Numerous issues arise in designing concurrent versions of these data structures, clearly illustrating the challenges involved in designing data structures for shared-memory multiprocessors. Stacks

A concurrent stack is a data structure linearizable to a sequential stack that provides push and pop operations with the usual LIFO semantics. Various alternatives exist for the

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-15

behavior of these data structures in full or empty states, including returning a special value indicating the condition, raising an exception, or blocking. Michael and Scott present several linearizable lock-based concurrent stack implementations: they are based on sequential linked lists with a top pointer and a global lock that controls access to the stack [102]. They typically scale poorly because even if one reduces contention on the lock, the top of the stack is a sequential bottleneck. Combining funnels [130] have been used to implement a linearizable stack that provides parallelism under high load. As with all combining structures, it is blocking, and it has a high overhead which makes it unsuitable for low loads. Treiber [133] was the ﬁrst to propose a lock-free concurrent stack implementation. He represented the stack as a singly-linked list with a top pointer and used CAS to modify the value of the top pointer atomically. Michael and Scott [102] compare the performance of Treiber’s stack to an optimized nonblocking algorithm based on Herlihy’s methodology [50], and several lock-based stacks (such as an MCS lock [96]) in low load situations. They concluded that Treiber’s algorithm yields the best overall performance, and that this performance gap increases as the degree of multiprogramming grows. However, because the top pointer is a sequential bottleneck, even with an added backoﬀ mechanism to reduce contention, the Treiber stack oﬀers little scalability as concurrency increases [47]. Hendler et al. [47] observe that any stack implementation can be made more scalable using the elimination technique of Shavit and Touitou [126]. Elimination allows pairs of operations with reverse semantics—like pushes and pops on a stack—to complete without any central coordination, and therefore substantially aids scalability. The idea is that if a pop operation can ﬁnd a concurrent push operation to “partner” with, then the pop operation can take the push operation’s value, and both operations can return immediately. The net eﬀect of each pair is the same as if the push operation was followed immediately by the pop operation, in other words, they eliminate each other’s eﬀect on the state of the stack. Elimination can be achieved by adding a collision array from which each operation chooses a location at random, and then attempts to coordinate with another operation that concurrently chose the same location [126]. The number of eliminations grows with concurrency, resulting in a high degree of parallelism. This approach, especially if the collision array is used as an adaptive backoﬀ mechanism on the shared stack, introduces a high degree of parallelism with little contention [47], and delivers a scalable lock-free linearizable stack. There is a subtle point in the Treiber stack used in the implementations above that is typical of many CAS-based algorithms. Suppose several concurrent threads all attempt a pop operation that removes the ﬁrst element, located in some node “A,” from the list by using a CAS to redirect the head pointer to point to a previously-second node “B.” The problem is that it is possible for the list to change completely just before a particular pop operation attempts its CAS, so that by the time it does attempt it, the list has the node “A” as the ﬁrst node as before, but the rest of the list including “B” is in a completely diﬀerent order. This CAS of the head pointer from “A” to “B” may now succeed, but “B” might be anywhere in the list and the stack will behave incorrectly. This is an instance of the “ABA” problem [110], which plagues many CAS-based algorithms. To avoid this problem, Treiber augments the head pointer with a version number that is incremented every time the head pointer is changed. Thus, in the above scenario, the changes to the stack would cause the CAS to fail, thereby eliminating the ABA problem.§

§ Note

that the version number technique does not technically eliminate the ABA problem because the version number can wrap around; see [105] for a discussion of the consequences of this point in practice,

© 2005 by Chapman & Hall/CRC

47-16

Handbook of Data Structures and Applications

Queues

A concurrent queue is a data structure linearizable to a sequential queue that provides enqueue and dequeue operations with the usual FIFO semantics. Michael and Scott [102] present a simple lock-based queue implementation that improves on the naive single-lock approach by having separate locks for the head and tail pointers of a linked-list-based queue. This allows an enqueue operation to execute in parallel with a dequeue operation (provided we avoid false sharing by placing the head and tail locks in separate cache lines). This algorithm is quite simple, with one simple trick: a “dummy” node is always in the queue, which allows the implementation to avoid acquiring both the head and tail locks in the case that the queue is empty, and therefore it avoids deadlock. It is a matter of folklore that one can implement an array-based lock-free queue for a single enqueuer thread and a single dequeuer thread using only load and store operations [81]. A linked-list-based version of this algorithm appears in [46]. Herlihy and Wing [57] present a lock-free array-based queue that works if one assumes an unbounded size array. A survey in [102] describes numerous ﬂawed attempts at devising general (multiple enqueuers, multiple dequeuers) nonblocking queue implementations. It also discusses some correct implementations that involve much more overhead than the ones discussed below. Michael and Scott [102] present a linearizable CAS-based lock-free queue with parallel access to both ends. The structure of their algorithm is very simple and is similar to the two-lock algorithm mentioned above: it maintains head and tail pointers, and always keeps a dummy node in the list. To avoid using a lock, the enqueue operation adds a new node to the end of the list using CAS, and then uses CAS to update the tail pointer to reﬂect the addition. If the enqueue is delayed between these two steps, another enqueue operation can observe the tail pointer “lagging” behind the end of the list. A simple helping technique [50] is used to recover from this case, ensuring that the tail pointer is always behind the end of the list by at most one element. While this implementation is simple and eﬃcient enough to be used in practice, it does have a disadvantage. Operations can access nodes already removed from the list, and therefore the nodes cannot be freed. Instead, they are put into a freelist —a list of nodes stored for reuse by future enqueue operations—implemented using Treiber’s stack. This use of a freelist has the disadvantage that the space consumed by the nodes in the freelist cannot be freed for arbitrary reuse. Herlihy et al. [52] and Michael [100] have presented nonblocking memory management techniques that overcome this disadvantage. It is interesting to note that the elimination technique is not applicable to queues: we cannot simply pass a value from an enqueue operation to a concurrent dequeue operation, because this would not respect the FIFO order with respect to other values in the queue. Deques

A concurrent double-ended queue (deque) is a linearizable concurrent data structure that generalizes concurrent stacks and queues by allowing pushes and pops at both ends [73]. (See Chapter 2 for an introduction to stacks, queues and deques.) As with queues, implementations that allow operations on both ends to proceed in parallel without interfering with each other are desirable. Lock-based deques can be implemented easily using the same two-lock approach used

and also a “bounded tag” algorithm that eliminates the problem entirely, at some cost in space and time.

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-17

for queues. Given the relatively simple lock-free implementations for stacks and queues, it is somewhat surprising that there is no known lock-free deque implementation that allows concurrent operations on both ends. Martin et al. [95] provide a summary of concurrent deque implementations, showing that, even using nonconventional two-word synchronization primitives such as double-compare-and-swap (DCAS) [106], it is diﬃcult to design a lockfree deque. The only known nonblocking deque implementation for current architectures that supports noninterfering operations at opposite ends of the deque is an obstruction-free CAS-based implementation due to Herlihy et al. [53].

47.4

Pools

Much of the diﬃculty in implementing eﬃcient concurrent stacks and queues arises from the ordering requirements on when an element that has been inserted can be removed. A concurrent pool [94] is a data structure that supports insert and delete operations, and allows a delete operation to remove any element that has been inserted and not subsequently deleted. This weaker requirement oﬀers opportunities for improving scalability. A high-performance pool can be built using any quiescently consistent counter implementation [10, 128]. Elements are placed in an array, and a fetch-and-inc operation is used to determine in which location an insert operation stores its value, and similarly from which location a delete operation takes its value. Each array element contains a full/empty bit or equivalent mechanism to indicate if the element to be removed has already been placed in the location. Using such a scheme, any one of the combining tree, combining funnel, counting network, or diﬀracting tree approaches described above can be used to create a high throughput shared pool by parallelizing the main bottlenecks: the shared counters. Alternatively, a “stack like” pool can be implemented by using a counter that allows increments and decrements, and again using one of the above techniques to parallelize it. Finally, the elimination technique discussed earlier is applicable to pools constructed using combining funnels, counting networks, or diﬀracting trees: if insert and delete operations meet in the tree, the delete can take the value being inserted by the insert operation, and both can leave without continuing to traverse the structure. This technique provides high performance under high load. The drawback of all these implementations is that they perform rather poorly under low load. Moreover, when used for work-load distribution [9, 19, 118], they do not allow us to exploit locality information, as pools designed speciﬁcally for work-load distribution do. Workload distribution (or load balancing) algorithms involve a collection of pools of units of work to be done; each pool is local to a given processor. Threads create work items and place them in local pools, employing a load balancing algorithm to ensure that the number of items in the pools is balanced. This avoids the possibility that some processors are idle while others still have work in their local pools. There are two general classes of algorithms of this type: work sharing [46, 118] and work stealing [9, 19]. In a work sharing scheme, each processor attempts to continuously oﬄoad work from its pool to other pools. In work stealing, a thread that has no work items in its local pool steals work from other pools. Both classes of algorithms typically use randomization to select the pool with which to balance or the target pool for stealing. The classical work stealing algorithm is due to Arora et al. [9]. It is based on a lock-free construction of a deque that allows operations by only one thread (the thread to which the pool is local) at one end of the deque, allowing only pop operations at the other end, and allowing concurrent pop operations at that end to “abort” if they interfere. A deque with these restrictions is suitable for work stealing, and the restrictions allow a simple

© 2005 by Chapman & Hall/CRC

47-18

Handbook of Data Structures and Applications P: delete(b) ...CAS(&a.next,b,d)... Q: insert(c) ...CAS(&b.next,d,c)...

P: delete(b) ...CAS(&a.next,b,c)... Q: delete(c) ...CAS(&b.next,c,d)...

a

b

d

c Problem: node c not inserted

a

b

c

d

Problem: node c not deleted

FIGURE 47.6: CAS-based list manipulation is hard. In both examples, P is deleting b from the list (the examples slightly abuse CAS notation). In the upper example, Q is trying to insert c into the list, and in the lower example, Q is trying to delete c from the list. Circled locations indicate the target addresses of the CAS operations; crossed out pointers are the values before the CAS succeeds. implementation in which the local thread can insert and delete using simple low-cost load and store operations, resorting to a more expensive CAS operation only when it competes with the remote deleters for the last remaining item in the queue. It has been shown that in some cases it is desirable to steal more than one item at a time [15, 103]. A nonblocking multiple-item work-stealing algorithm due to Hendler and Shavit appears in [45]. It has also been shown that in some cases it desirable to use aﬃnity information of work items in deciding which items to steal. A locality-guided work stealing algorithm due to Acar et al. appears in [1].

47.5

Linked Lists

Consider implementations of concurrent search structures supporting insert, delete, and search operations. If these operations deal only with a key value, then the resulting data structure is a set ; if a data value is associated with each key, we have a dictionary [24]. These are closely related data structures, and a concurrent set implementation can often be adapted to implement a dictionary. In the next three sections, we concentrate on implementing sets using diﬀerent structures: linked lists, hash tables, and trees. Suppose we use a linked list to implement a set. Apart from globally locking the linked list to prevent concurrent manipulation, the most popular approach to concurrent lockbased linked lists is hand-over-hand locking (sometimes called lock coupling) [14, 89]. In this approach, each node has an associated lock. A thread traversing the linked list releases a node’s lock only after acquiring the lock of the next node in the list, thus preventing overtaking which may cause unnoticed removal of a node. This approach reduces lock granularity but signiﬁcantly limits concurrency because insertions and deletions at disjoint list locations may delay each other. One way to overcome this problem is to design lock-free linked lists. The diﬃculty in implementing a lock-free ordered linked list is ensuring that during an insertion or deletion, the adjacent nodes are still valid, i.e., they are still in the list and are still adjacent. As Figure 47.6 shows, designing such lock-free linked lists is not a straightforward matter. The ﬁrst CAS-based lock-free linked list is due to Valois [135], who uses a special auxiliary node in front of every regular node to prevent the undesired phenomena depicted in Figure 47.6. Valois’s algorithm is correct when combined with a memory management solution due to Michael and Scott [101], but this solution is not practical. Harris [42] presents a

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-19

lock-free list that uses a special “deleted” bit that is accessed atomically with node pointers in order to signify that a node has been deleted; this scheme is applicable only in garbage collected environments. Michael [99] overcomes this disadvantage by modifying Harris’s algorithm to make it compatible with memory reclamation methods [52, 100].

47.6

Hash Tables

A typical extensible hash table is a resizable array of buckets, each holding an expected constant number of elements, and thus requiring on average a constant time for insert, delete and search operations [24]. The principal cost of resizing—the redistribution of items between old and new buckets—is amortized over all table operations, thus keeping the cost of operations constant on average. Here resizing means extending the table, as it has been shown that as a practical matter, hash tables need only increase in size [58]. See Chapter 9 for more on hash tables. Michael [99] shows that a concurrent non-extensible hash table can be achieved by placing a read-write lock on every bucket in the table. However, to guarantee good performance as the number of elements grows, hash tables must be extensible [30]. In the eighties, Ellis [29] and others [58, 77] extended the work of Fagin et al. [30] by designing an extensible concurrent hash table for distributed databases based on two-level locking schemes. A recent extensible hash algorithm by Lea [88] is known to be highly eﬃcient in non-multiprogrammed environments [125]. It is based on a version of Litwin’s sequential linear hashing algorithm [91]. It uses a locking scheme that involves a small number of high-level locks rather than a lock per bucket, and allows concurrent searches while resizing the table, but not concurrent inserts or deletes. Resizing is performed as a global restructuring of all buckets when the table size needs to be doubled. Lock-based extensible hash-table algorithms suﬀer from all of the typical drawbacks of blocking synchronization, as discussed earlier. These problems become more acute because of the elaborate “global” process of redistributing the elements in all the hash table’s buckets among newly added buckets. Lock-free extensible hash tables are thus a matter of both practical and theoretical interest. As described in Section 47.5, Michael [99] builds on the work of Harris [42] to provide an eﬀective CAS-based lock-free linked list implementation. He then uses this as the basis for a lock-free hash structure that performs well in multiprogrammed environments: a ﬁxed-sized array of hash buckets, each implemented as a lock-free list. However, there is a diﬃculty in making a lock-free array of lists extensible since it is not obvious how to redistribute items in a lock-free manner when the bucket array grows. Moving an item between two bucket lists seemingly requires two CAS operations to be performed together atomically, which is not possible on current architectures. Greenwald [39] shows how to implement an extensible hash table using his two-handed emulation technique. However, this technique employs a DCAS synchronization operation, which is not available on current architectures, and introduces excessive amounts of work during global resizing operations. Shalev and Shavit [125] introduce a lock-free extensible hash table which works on current architectures. Their key idea is to keep the items in a single lock-free linked list instead of a list per bucket. To allow operations fast access to the appropriate part of the list, the ShalevShavit algorithm maintains a resizable array of “hints” (pointers into the list); operations use the hints to ﬁnd a point in the list that is close to the relevant position, and then follow list pointers to ﬁnd the position. To ensure a constant number of steps per operation on average, ﬁner grained hints must be added as the number of elements in the list grows. To allow these

© 2005 by Chapman & Hall/CRC

47-20

Handbook of Data Structures and Applications

hints to be installed simply and eﬃciently, the list is maintained in a special recursive split ordering. This technique allows new hints to be installed incrementally, thereby eliminating the need for complicated mechanisms for atomically moving items between buckets, or reordering the list.

47.7

Search Trees

A concurrent implementation of any search tree (See Chapters 3 and 10 for more on sequential search trees) can be achieved by protecting it using a single exclusive lock. Concurrency can be improved somewhat by using a reader-writer lock to allow all read-only (search) operations to execute concurrently with each other while holding the lock in shared mode, while update (insert or delete) operations exclude all other operations by acquiring the lock in exclusive mode. If update operations are rare, this may be acceptable, but with even a moderate number of updates, the exclusive lock for update operations creates a sequential bottleneck that degrades performance substantially. By using ﬁne-grained locking strategies—for example by using one lock per node, rather than a single lock for the entire tree—we can improve concurrency further. Kung and Lehman [78] present a concurrent binary search tree implementation in which update operations hold only a constant number of node locks at a time, and these locks only exclude other update operations: search operations are never blocked. However, this implementation makes no attempt to keep the search tree balanced. In the remainder of this section, we focus on balanced search trees, which are considerably more challenging. As a ﬁrst step towards more ﬁne-grained synchronization in balanced search tree implementations, we can observe that it is suﬃcient for an operation to hold an exclusive lock on the subtree in which it causes any modiﬁcations. This way, update operations that modify disjoint subtrees can execute in parallel. We brieﬂy describe some techniques in this spirit in the context of B+ -trees. Recall that in B+ -trees, all keys and data are stored in leaf nodes; internal nodes only maintain routing information to direct operations towards the appropriate leaf nodes. Furthermore, an insertion into a leaf may require the leaf to be split, which may in turn require a new entry to be added to the leaf’s parent, which itself may need to be split to accommodate the new entry. Thus, an insertion can potentially result in modifying all nodes along the path from the root to the leaf. However, such behavior is rare, so it does not make sense to exclusively lock the whole path just in case this occurs. As a ﬁrst step to avoiding such conservative locking strategies, we can observe that if an insert operation passes an internal B+ -tree node that is not full, then the modiﬁcations it makes to the tree cannot propagate past that node. In this case, we say that the node is safe with respect to the insert operation. If an update operation encounters a safe node while descending the tree acquiring exclusive locks on each node it traverses, it can safely release the locks on all ancestors of that node, thereby improving concurrency by allowing other operations to traverse those nodes [98, 120]. Because search operations do not modify the tree, they can descend the tree using lock coupling: as soon as a lock has been acquired on a child node, the lock on its parent can be released. Thus, search operations hold at most two locks (in shared mode) at any point in time, and are therefore less likely to prevent progress by other operations. This approach still requires each update operation to acquire an exclusive lock on the root node, and to hold the lock while reading a child node, potentially from disk, so the root is still a bottleneck. We can improve on this approach by observing that most update operations will not need to split or merge the leaf node they access, and will therefore eventually release the exclusive locks on all of the nodes traversed on the way to the leaf.

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-21

This observation suggests an “optimistic” approach in which we descend the tree acquiring the locks in shared mode, acquiring only the leaf node exclusively [14]. If the leaf does not need to be split or merged, the update operation can complete immediately; in the rare cases in which changes do need to propagate up the tree, we can release all of the locks and then retry with the more pessimistic approach described above. Alternatively, we can use reader-writer locks that allow locks held in a shared mode to be “upgraded” to exclusive mode. This way, if an update operation discovers that it does need to modify nodes other than the leaf, it can upgrade locks it already holds in shared mode to exclusive mode, and avoid completely restarting the operation from the top of the tree [14]. Various combinations of the above techniques can be used because nodes near the top of the tree are more likely to conﬂict with other operations and less likely to be modiﬁed, while the opposite is true of nodes near the leaves [14]. As we employ some of the more sophisticated techniques described above, the algorithms become more complicated, and it becomes more diﬃcult to avoid deadlock, resulting in even further complications. Nonetheless, all of these techniques maintain the invariant that operations exclusively lock the subtrees that they modify, so operations do not encounter states that they would not encounter in a sequential implementation. Signiﬁcant improvements in concurrency and performance can be made by relaxing this requirement, at the cost of making it more diﬃcult to reason that the resulting algorithms are correct. A key diﬃculty we encounter when we attempt to relax the strict subtree locking schemes is that an operation descending the tree might follow a pointer to a child node that is no longer the correct node because of a modiﬁcation by a concurrent operation. Various techniques have been developed that allow operations to recover from such “confusion”, rather than strictly avoiding it. An important example in the context of B+ -trees is due to Lehman and Yao [90], who deﬁne Blink -trees: B+ -trees with “links” from each node in the tree to its right neighbor at the same level of the tree. These links allow us to “separate” the splitting of a node from modiﬁcations to its parent to reﬂect the splitting. Speciﬁcally, in order to split a node n, we can create a new node n to its right, and install a link from n to n . If an operation that is descending the tree reaches node n while searching for a key position that is now covered by node n due to the split, the operation can simply follow the link from n to n to recover. This allows a node to be split without preventing access by concurrent operations to the node’s parent. As a result, update operations do not need to simultaneously lock the entire subtree they (potentially) modify. In fact, in the Lehman-Yao algorithm, update operations as well as search operations use the lock coupling technique so that no operation ever holds more than two locks at a time, which signiﬁcantly improves concurrency. This technique has been further reﬁned, so that operations never hold more than one lock at a time [119]. Lehman and Yao do not address how nodes can be merged, instead allowing delete operations to leave nodes underfull. They argue that in many cases delete operations are rare, and that if space utilization becomes a problem, the tree can occasionally be reorganized in “batch” mode by exclusively locking the entire tree. Lanin and Shasha [83] incorporate merging into the delete operations, similarly to how insert operations split overﬂowed nodes in previous implementations. Similar to the Lehman-Yao link technique, these implementations use links to allow recovery by operations that have mistakenly reached a node that has been evacuated due to node merging. In all of the algorithms discussed above, the maintenance operations such as node splitting and merging (where applicable) are performed as part of the regular update operations. Without such tight coupling between the maintenance operations and the regular operations that necessitate them, we cannot guarantee strict balancing properties. However, if we relax the balance requirements, we can separate the tree maintenance work from the update

© 2005 by Chapman & Hall/CRC

47-22

Handbook of Data Structures and Applications

operations, resulting in a number of advantages that outweigh the desire to keep search trees strictly balanced. As an example, the Blink -tree implementation in [119] supports a compression process that can run concurrently with regular operations to merge nodes that are underfull. By separating this work from the regular update operations, it can be performed concurrently by threads running on diﬀerent processors, or in the background. The idea of separating rebalancing work from regular tree operations was ﬁrst suggested for red-black trees [40], and was ﬁrst realized in [71] for AVL trees [2] supporting insert and search operations. An implementation that also supports delete operations is provided in [108]. These implementations improve concurrency by breaking balancing work down into small, local tree transformations that can be performed independently. Analysis in [84] shows that with some modiﬁcations, the scheme of [108] guarantees that each update operation causes at most O(log N ) rebalancing operations for an N -node AVL tree. Similar results exist for B-trees [87, 108] and red-black trees [20, 107]. The only nonblocking implementations of balanced search trees have been achieved using Dynamic Software Transactional Memory mechanisms [33, 54]. These implementations use transactions translated from sequential code that performs rebalancing work as part of regular operations. The above brief survey covers only basic issues and techniques involved with implementing concurrent search trees. To mention just a few of the numerous improvements and extensions in the literature, [104] addresses practical issues for the use of B+ -trees in commercial database products, such as recovery after failures; [74] presents concurrent implementations for generalized search trees (GiSTs) that facilitate the design of search trees without repeating the delicate work involved with concurrency control; and [85, 86] present several types of trees that support the eﬃcient insertion and/or deletion of a group of values. Pugh [111] presents a concurrent version of his skiplist randomized search structure [112]. Skiplists are virtual tree structures consisting of multiple layers of linked lists. The expected search time in a skiplist is logarithmic in the number of elements in it. The main advantage of skiplists is that they do not require rebalancing: insertions are done in a randomized fashion that keeps the search tree balanced. Empirical and analytical evaluations of concurrent search trees and other data structures can be found in [41, 66].

47.8

Priority Queues

A concurrent priority queue is a data structure linearizable to a sequential priority queue that provides insert and delete-min operations with the usual priority queue semantics. (See Part II of this handbook for more on sequential priority queues.) Heap-Based Priority Queues

Many of the concurrent priority queue constructions in the literature are linearizable versions of the heap structures described earlier in this book. Again, the basic idea is to use ﬁne-grained locking of the individual heap nodes to allow threads accessing diﬀerent parts of the data structure to do so in parallel where possible. A key issue in designing such concurrent heaps is that traditionally insert operations proceed from the bottom up and delete-min operations from the top down, which creates potential for deadlock. Biswas and Brown [17] present such a lock-based heap algorithm assuming specialized “cleanup” threads to overcome deadlocks. Rao and Kumar [115] suggest to overcome the drawbacks of [17] using an algorithm that has both insert and delete-min operations proceed from the top down. Ayani [11] improved on their algorithm by suggesting a way to have consecutive

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-23

insertions be performed on opposite sides of the heap. Jones [67] suggests a scheme similar to [115] based on a skew heap. Hunt et al. [60] present a heap-based algorithm that overcomes many of the limitations of the above schemes, especially the need to acquire multiple locks along the traversal path in the heap. It proceeds by locking for a short duration a variable holding the size of the heap and a lock on either the ﬁrst or last element of the heap. In order to increase parallelism, insertions traverse the heap bottom-up while deletions proceed top-down, without introducing deadlocks. Insertions also employ a left-right technique as in [11] to allow them to access opposite sides on the heap and thus minimize interference. On a diﬀerent note, Huang and Weihl [59] show a concurrent priority queue based on a concurrent version of Fibonacci Heaps [34]. Nonblocking linearizable heap-based priority queue algorithms have been proposed by Herlihy [50], Barnes [12], and Israeli and Rappoport [64]. Sundell and Tsigas [132] present a lock-free priority queue based on a lock-free version of Pugh’s concurrent skiplist [111]. Tree-Based Priority Pools

Huang and Weihl [59] and Johnson [65] describe concurrent priority pools: priority queues with relaxed semantics that do not guarantee linearizability of the delete-min operations. Their designs are both based on a modiﬁed concurrent B+ -tree implementation. Johnson introduces a “delete bin” that accumulates values to be deleted and thus reduces the load when performing concurrent delete-min operations. Shavit and Zemach [129] show a similar pool based on Pugh’s concurrent skiplist [111] with an added “delete bin” mechanism based on [65]. Typically, the weaker pool semantics allows for increased concurrency. In [129] they further show that if the size of the set of allowable keys is bounded (as is often the case in operating systems) a priority pool based on a binary tree of combining funnel nodes can scale to hundreds (as opposed to tens) of processors.

47.9

Summary

We have given an overview of issues related to the design of concurrent data structures for shared-memory multiprocessors, and have surveyed some of the important contributions in this area. Our overview clearly illustrates that the design of such data structures provides signiﬁcant challenges, and as of this writing, the maturity of concurrent data structures falls well behind that of sequential data structures. However, signiﬁcant progress has been made towards understanding key issues and developing new techniques to facilitate the design of eﬀective concurrent data structures; we are particularly encouraged by renewed academic and industry interest in stronger hardware support for synchronization. Given new understanding, new techniques, and stronger hardware support, we believe signiﬁcant advances in concurrent data structure designs are likely in the coming years.

References [1] U. Acar, G. Blelloch, and R. Blumofe. The data locality of work stealing. In ACM Symposium on Parallel Algorithms and Architectures, pages 1–12, 2000. [2] G. Adel’son-Vel’skii and E. Landis. An algorithm for the organization of information. Doklady Akademii Nauk USSR, 146(2):263–266, 1962. [3] A. Agarwal and M. Cherian. Adaptive backoﬀ synchronization techniques. In Proceedings of the 16th International Symposium on Computer Architecture, pages 396–406, May 1989.

© 2005 by Chapman & Hall/CRC

47-24

Handbook of Data Structures and Applications

[4] E. Aharonson and H. Attiya. Counting networks with arbitrary fan-out. Distributed Computing, 8(4):163–169, 1995. [5] B. Aiello, R. Venkatesan, and M. Yung. Coins, weights and contention in balancing networks. In Proceedings of the 13th Annual ACM Symposium on Principles of Distributed Computing, pages 193–214, August 1994. [6] J. Anderson, Y. Kim, and T. Herman. Shared-memory mutual exclusion: Major research trends since 1986. Distributed Computing, 16:75–110, 2003. [7] J. Anderson and J. Yang. Time/contention trade-oﬀs for multiprocessor synchronization. Information and Computation, 124(1):68–84, 1996. [8] T. Anderson. The performance implications of spin lock alternatives for sharedmemory multiprocessors. IEEE Transactions on Parallel and Distributed Systems, 1(1):6–16, 1990. [9] N. Arora, R. Blumofe, and G. Plaxton. Thread scheduling for multiprogrammed multiprocessors. Theory of Computing Systems, 34(2):115–144, 2001. [10] J. Aspnes, M. Herlihy, and N. Shavit. Counting networks. Journal of the ACM, 41(5):1020–1048, 1994. [11] R. Ayani. LR-algorithm: concurrent operations on priority queues. In In Proceedings of the 2nd IEEE Symposium on Parallel and Distributed Processing, pages 22–25, 1991. [12] G. Barnes. Wait free algorithms for heaps. Technical Report TR-94-12-07, University of Washington, 1994. [13] K. Batcher. Sorting networks and their applications. In Proceedings of AFIPS Joint Computer Conference, pages 338–334, 1968. [14] R. Bayer and M. Schkolnick. Concurrency of operations on B-trees. Acta Informatica, 9:1–21, 1979. [15] P. Berenbrink, T. Friedetzky, and L. Goldberg. The natural work-stealing algorithm is stable. SIAM Journal on Computing, 32(5):1260–1279, 2003. [16] P. Bernstein, V. Hadzilacos, and N. Goodman. Concurrency Control and Recovery in Database Systems. Addison-Wesley, 1987. [17] J. Biswas and J. Browne. Simultaneous update of priority structures. In In Proceedings of the 1987 International Conference on Parallel Processing, pages 124–131, August 1987. [18] G. Blelloch, P. Cheng, and P. Gibbons. Room synchronizations. In Proceedings of the thirteenth annual ACM symposium on Parallel algorithms and architectures, pages 122–133. ACM Press, 2001. [19] R. Blumofe and C. Leiserson. Scheduling multithreaded computations by work stealing. Journal of the ACM, 46(5):720–748, 1999. [20] J. Boyar and K. Larsen. Eﬃcient rebalancing of chromatic search trees. Journal of Computer and System Sciences, 49(3):667–682, December 1994. [21] E.D. Brooks III. The butterﬂy barrier. International Journal of Parallel Programming, 15(4):295–307, October 1986. [22] C. Busch and M. Herlihy. A survey on counting networks. [23] C. Busch and M. Mavronicolas. A combinatorial treatment of balancing networks. Journal of the ACM, 43(5):794–839, September 1996. [24] T. Cormen, C. Leiserson, R. Rivest, and C. Stein. Introduction to Algorithms. MIT Press, Cambridge, MA, second edition, 2001. [25] T. Craig. Building FIFO and priority-queueing spin locks from atomic swap. Technical Report TR 93-02-02, University of Washington, Department of Computer Science, February 1993. [26] G. Della-Libera and N. Shavit. Reactive diﬀracting trees. Journal of Parallel Dis-

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-25

tributed Computing, 60(7):853–890, 2000. [27] E. Dijkstra and C. Sholten. Termination detection for diﬀusing computations. Information Processing Letters, 11(1):1–4, 1980. [28] Cynthia Dwork, Maurice Herlihy, and Orli Waarts. Contention in shared memory algorithms. Journal of the ACM, 44(6):779–805, 1997. [29] C. Ellis. Concurrency in linear hashing. ACM Transactions on Database Systems (TODS), 12(2):195–217, 1987. [30] R. Fagin, J. Nievergelt, N. Pippenger, and H. Strong. Extendible hashing: a fast access method for dynamic ﬁles. ACM Transactions on Database Systems, 4(3):315– 355, September 1979. [31] E. Felten, A. Lamarca, and R. Ladner. Building counting networks from larger balancers. Technical Report TR-93-04-09, University of Washington, 1993. [32] M. Fischer, N. Lynch, and M. Paterson. Impossibility of distributed consensus with one faulty process. Journal of the ACM, pages 374–382, 1985. [33] K. Fraser. Practical Lock-Freedom. Ph.D. dissertation, Kings College, University of Cambridge, Cambridge, England, September 2003. [34] M. Fredman and R. Tarjan. Fibonacci heaps and their uses in improved network optimization algorithms. J. ACM, 34(3):596–615, 1987. [35] P. Gibbons, Y. Matias, and V. Ramachandran. The queue-read queue-write PRAM model: Accounting for contention in parallel algorithms. SIAM Journal on Computing, 28(2):733–769, 1998. [36] J. Goodman, M. Vernon, and P. Woest. Eﬃcient synchronization primitives for large-scale cache-coherent shared-memory multiprocessors. In Proceedings of the 3rd

[37]

[38] [39]

[40]

[41] [42]

[43]

[44]

[45] [46]

International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS-III), pages 64–75. ACM Press, April 1989. A. Gottlieb, R. Grishman, C.P. Kruskal, K.P. McAuliﬀe, L. Rudolph, and M. Snir. The NYU ultracomputer - designing an MIMD parallel computer. IEEE Transactions on Computers, C-32(2):175–189, February 1984. G. Graunke and S. Thakkar. Synchronization algorithms for shared-memory multiprocessors. IEEE Computer, 23(6):60–70, June 1990. M. Greenwald. Two-handed emulation: How to build non-blocking implementations of complex data structures using DCAS. In Proceedings of the 21st Annual Symposium on Principles of Distributed Computing, 2002. L. Guibas and R. Sedgewick. A dichromatic framework for balanced trees. In Proceedings of the 19th IEEE Symposium on Foundations of Computer Science, pages 8–21, October 1978. S. Hanke. The performance of concurrent red-black tree algorithms. Lecture Notes in Computer Science, 1668:286–300, 1999. T. Harris. A pragmatic implementation of non-blocking linked-lists. 15th International Conference on Distributed Computing, Lecture Notes in Computer Science, 2180, pages 300–314, 2001. T. Harris and K. Fraser. Language support for lightweight transactions. In Proceedings of the 18th ACM SIGPLAN Conference on Object-Oriented Programing, Systems, Languages, and Applications, pages 388–402. ACM Press, 2003. T. Harris, K. Fraser, and I. Pratt. A practical multi-word compare-and-swap operation. In Proceedings of the 16th International Symposium on DIStributed Computing, pages 265–279, 2002. D. Hendler and N. Shavit. Non-blocking steal-half work queues. In Proceedings of the 21st Annual ACM Symposium on Principles of Distributed Computing, 2002. D. Hendler and N. Shavit. Work dealing. In Proceedings of the 14th Annual ACM

© 2005 by Chapman & Hall/CRC

47-26

Handbook of Data Structures and Applications

Symposium on Parallel Algorithms and Architectures (SPAA 2002), pages 164– 172, 2002. [47] D. Hendler, N. Shavit, and L. Yerushalmi. A scalable lock-free stack algorithm. In Proceedings of the 16th ACM Symposium on Parallelism in Algorithms and Architectures (SPAA 2004), pages 206–215, 2004. [48] D. Hensgen, R. Finkel, and U. Manber. Two algorithms for barrier synchronization. International Journal of Parallel Programming, 17(1):1–17, 1988. [49] M. Herlihy. Wait-free synchronization. ACM Transactions on Programming Languages and Systems, 13(1):124–149, January 1991. [50] M. Herlihy. A methodology for implementing highly concurrent data objects. ACM Transactions on Programming Languages and Systems, 15(5):745–770, November 1993. [51] M. Herlihy, B. Lim, and N. Shavit. Scalable concurrent counting. ACM Transactions on Computer Systems, 13(4):343–364, 1995. [52] M. Herlihy, V. Luchangco, and M. Moir. The repeat oﬀender problem: A mechanism for supporting lock-free dynamic-sized data structures. In Proceedings of the 16th International Symposium on DIStributed Computing, volume 2508, pages 339–353. Springer-Verlag Heidelberg, January 2002. A improved version of this paper is in preparation for journal submission; please contact authors. [53] M. Herlihy, V. Luchangco, and M. Moir. Obstruction-free synchronization: Doubleended queues as an example. In Proceedings of the 23rd International Conference on Distributed Computing Systems, pages 522–529. IEEE, 2003. [54] M. Herlihy, V. Luchangco, M. Moir, and W. Scherer. Software transactional memory for dynamic data structures. In Proceedings of the 22nd Annual ACM Symposium on Principles of Distributed Computing, 2003. [55] M. Herlihy and E. Moss. Transactional memory: Architectural support for lock-free data structures. In Proceedings of the Twentieth Annual International Symposium on Computer Architecture, 1993. [56] M. Herlihy, N. Shavit, and O. Waarts. Linearizable counting networks. Distributed Computing, 9(4):193–203, 1996. [57] M. Herlihy and J. Wing. Linearizability: A correctness condition for concurrent objects. ACM Transactions on Programming Languages and Systems, 12(3):463– 492, July 1990. [58] M. Hsu and W. Yang. Concurrent operations in extendible hashing. In Symposium on Very Large Data Bases, pages 241–247, 1986. [59] Q. Huang and W. Weihl. An evaluation of concurrent priority queue algorithms. In IEEE Parallel and Distributed Computing Systems, pages 518–525, 1991. [60] G. Hunt, M. Michael, S. Parthasarathy, and M. Scott. An eﬃcient algorithm for concurrent priority queue heaps. Information Processing Letters, 60(3):151–157, November 1996. [61] IBM. System/370 principles of operation. Order Number GA22-7000. [62] IBM. Powerpc microprocessor family: Programming environments manual for 64 and 32-bit microprocessors, version 2.0, 2003. [63] Intel. Pentium Processor Family User’s Manual: Vol 3, Architecture and Programming Manual, 1994. [64] A. Israeli and L. Rappoport. Eﬃcient wait-free implementation of a concurrent priority queue. In The 7th International Workshop on Distributed Algorithms, pages 1–17, 1993. [65] T. Johnson. A highly concurrent priority queue based on the B-link tree. Technical Report 91-007, University of Florida, August 1991.

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-27

[66] T. Johnson and D. Sasha. The performance of current B-tree algorithms. ACM Transactions on Database Systems (TODS), 18(1):51–101, 1993. [67] D. Jones. Concurrent operations on priority queues. Communications of the ACM, 32(1):132–137, 1989. [68] Y. Joung. The congenial talking philosophers problem in computer networks. Distrib. Comput., 15(3):155–175, 2002. [69] G. Kane. MIPS RISC Architecture. Prentice Hall, New York, 1989. [70] P. Keane and M. Moir. A simple local-spin group mutual exclusion algorithm. In Pro-

[71] [72]

[73] [74]

[75]

[76]

[77] [78]

[79] [80]

[81] [82] [83]

[84] [85]

[86]

ceedings of the Eighteenth Annual ACM Symposium on Principles of Distributed Computing, pages 23–32. ACM Press, 1999. J. Kessels. On-the-ﬂy optimization of data structures. Communications of the ACM, 26(11):895–901, November 1983. M. Klugerman and G. Plaxton. Small-depth counting networks. In Proceedings of the Twenty-Fourth Annual ACM Symposium on the Theory of Computing, pages 417–428, 1992. D. Knuth. The Art of Computer Programming: Fundamental Algorithms. Addison-Wesley, 2nd edition, 1968. M. Kornacker, C. Mohan, and J. Hellerstein. Concurrency and recovery in generalized search trees. In Proceedings of the 1997 ACM SIGMOD International Conference on Management of Data, pages 62–72. ACM Press, 1997. O. Krieger, M. Stumm, R. Unrau, and J. Hanna. A fair fast scalable reader-writer lock. In Proceedings of the 1993 International Conference on Parallel Processing, volume II - Software, pages II–201–II–204, Boca Raton, FL, 1993. CRC Press. C. Kruskal, L. Rudolph, and M. Snir. Eﬃcient synchronization on multiprocessors with shared memory. In Fifth ACM SIGACT-SIGOPS Symposium on Principles of Distributed Computing, August 1986. V. Kumar. Concurrent operations on extendible hashing and its performance. Communications of the ACM, 33(6):681–694, 1990. H. Kung and P. Lehman. Concurrent manipulation of binary search trees. ACM Transactions on Programming Languages and Systems, 5:354–382, September 1980. H. Kung and J. Robinson. On optimistic methods for concurrency control. ACM Transactions on Database Systems, 6(2):213–226, 1981. L. Lamport. How to make a multiprocessor computer that correctly executes multiprocess programs. IEEE Transactions on Computers, C-28(9):241–248, September 1979. L. Lamport. Specifying concurrent program modules. ACM Transactions on Programming Languages and Systems, 5(2):190–222, 1983. Leslie Lamport. A new solution of Dijkstra’s concurrent programming problem. Commun. ACM, 17(8):453–455, 1974. V. Lanin and D. Shasha. A symmetric concurrent B-tree algorithm. In Proceedings of the Fall Joint Computer Conference 1986, pages 380–389. IEEE Computer Society Press, November 1986. K. Larsen. AVL trees with relaxed balance. In Eighth International Parallel Processing Symposium, pages 888–893. IEEE Computer Society Press, April 1994. K. Larsen. Relaxed multi-way trees with group updates. In Proceedings of the Twentieth ACM SIGMOD-SIGACT-SIGART Symposium on Principles of Database Systems, pages 93–101. ACM Press, 2001. K. Larsen. Relaxed red-black trees with group updates. Acta Informatica, 38(8):565– 586, 2002.

© 2005 by Chapman & Hall/CRC

47-28

Handbook of Data Structures and Applications

[87] K. Larsen and R. Fagerberg. B-trees with relaxed balance. In Ninth International Parallel Processing Symposium, pages 196–202. IEEE Computer Society Press, April 1995. [88] D. Lea. Concurrent hash map in JSR166 concurrency utilities. http://gee.cs.oswego.edu/dl/concurrency-interest/index.html. [89] D. Lea. Concurrent Programming in Java(TM): Design Principles and Pattern. Addison-Wesley, second edition, 1999. [90] P. Lehman and S. Bing Yao. Eﬃcient locking for concurrent operations on B-trees. ACM Transactions on Database Systems (TODS), 6(4):650–670, December 1981. [91] W. Litwin. Linear hashing: A new tool for ﬁle and table addressing. In Sixth International Conference on Very Large Data Bases, pages 212–223. IEEE Computer Society, October 1980. [92] M. Loui and H. Abu-Amara. Memory requirements for agreement among unreliable asynchronous processes. In F. P. Preparata, editor, Advances in Computing Research, volume 4, pages 163–183. JAI Press, Greenwich, CT, 1987. [93] P. Magnussen, A. Landin, and E. Hagersten. Queue locks on cache coherent multiprocessors. In Proceedings of the 8th International Symposium on Parallel Processing (IPPS), pages 165–171. IEEE Computer Society, April 1994. [94] Udi Manber. On maintaining dynamic information in a concurrent environment. In Proceedings of the Sixteenth Annual ACM symposium on Theory of Computing, pages 273–278. ACM Press, 1984. [95] P. Martin, M. Moir, and G. Steele. Dcas-based concurrent deques supporting bulk allocation. Technical Report TR-2002-111, Sun Microsystems Laboratories, 2002. [96] J. Mellor-Crummey and M. Scott. Algorithms for scalable synchronization on sharedmemory multiprocessors. ACM Transactions on Computer Systems, 9(1):21–65, 1991. [97] J. Mellor-Crummey and M. Scott. Scalable reader-writer synchronization for sharedmemory multiprocessors. SIGPLAN Not., 26(7):106–113, 1991. [98] J. Metzger. Managing simultaneous operations in large ordered indexes. Technical report, Technische Universit¨ at M¨ unchen, Institut f¨ ur Informatik, TUM-Math, 1975. [99] M. Michael. High performance dynamic lock-free hash tables and list-based sets. In

[100]

[101] [102]

[103]

[104]

[105]

Proceedings of the Fourteenth Snnual ACM symposium on Parallel Algorithms and Architectures, pages 73–82. ACM Press, 2002. M. Michael. Safe memory reclamation for dynamic lock-free objects using atomic reads and writes. In The 21st Annual ACM Symposium on Principles of Distributed Computing, pages 21–30. ACM Press, 2002. M. Michael and M. Scott. Correction of a memory management method for lock-free data structures. Technical Report TR599, University of Rochester, 1995. M. Michael and M. Scott. Nonblocking algorithms and preemption-safe locking on multiprogrammed shared - memory multiprocessors. Journal of Parallel and Distributed Computing, 51(1):1–26, 1998. M. Mitzenmacher. Analyses of load stealing models based on diﬀerential equations. In Proceedings of the 10th ACM Symposium on Parallel Algorithms and Architectures, pages 212–221, 1998. C. Mohan and F. Levine. Aries/im: an eﬃcient and high concurrency index management method using write-ahead logging. In Proceedings of the 1992 ACM SIGMOD International Conference on Management of Data, pages 371–380. ACM Press, 1992. M. Moir. Practical implementations of non-blocking synchronization primitives. In Proceedings of the 16th Annual ACM Symposium on Principles of Distributed

© 2005 by Chapman & Hall/CRC

Concurrent Data Structures

47-29

Computing, pages 219–228, 1997. [106] Motorola. MC68020 32-bit microprocessor user’s manual. Prentice-Hall, 1986. [107] O. Nurmi and E. Soisalon-Soininen. Uncoupling updating and rebalancing in chromatic binary search trees. In Proceedings of the Tenth ACM SIGACT-SIGMODSIGART Symposium on Principles of Database Systems, pages 192–198. ACM Press, May 1991. [108] O. Nurmi, E. Soisalon-Soininen, and D. Wood. Concurrency control in database structures with relaxed balance. In Proceedings of the sixth ACM SIGACT-SIGMODSIGART Symposium on Principles of Database Systems, pages 170–176. ACM Press, 1987. [109] D. Patterson and J. Hennessy. Computer Organization and Design: The Hardware/Software Interface. Morgan Kaufmann, second edition, 1997. [110] S. Prakash, Y. Lee, and T. Johnson. A non-blocking algorithm for shared queues using compare-and-swap. IEEE Transactions on Computers, 43(5):548–559, 1994. [111] W. Pugh. Concurrent maintenance of skip lists. Technical Report CS-TR-2222.1, Institute for Advanced Computer Studies, Department of Computer Science, University of Maryland, 1989. [112] W. Pugh. Skip lists: a probabilistic alternative to balanced trees. ACM Transactions on Database Systems, 33(6):668–676, 1990. [113] R. Rajwar and J. Goodman. Speculative lock elision: Enabling highly concurrent multithreaded execution. In Proceedings of the 34th Annual International Symposium on Microarchitecture, pages 294–305, 2001. [114] R. Rajwar and J. Goodman. Transactional lock-free execution of lock-based programs. In 10th Symposium on Architectural Support for Programming Languages and Operating Systems, October 2003. [115] V. Rao and V. Kumar. Concurrent access of priority queues. IEEE Transactions on Computers, 37:1657–1665, December 1988. [116] M. Raynal. Algorithms for Mutual Exclusion. The MIT Press, Cambridge, MA, 1986. [117] M. Riedel and J. Bruck. Tolerating faults in counting networks. Poster presented at 10th ACM Symposium on Parallel Algorithms and Architectures, pages 27–36, 1998. [118] L. Rudolph, M. Slivkin-Allalouf, and E. Upfal. A simple load balancing scheme for task allocation in parallel machines. In In Proceedings of the 3rd Annual ACM Symposium on Parallel Algorithms and Architectures, pages 237–245. ACM Press, July 1991. [119] Y. Sagiv. Concurrent operations on B-trees with overtaking. Journal of Computer and System Sciences, 33(2):275–296, October 1986. [120] B. Samadi. B-trees in a system with multiple users. Information Processing Letter, 5(4):107–112, October 1976. [121] W. Savitch and M. Stimson. Time bounded random access machines with parallel processing. Journal of the ACM, 26:103–118, 1979. [122] M. Scott. Non-blocking timeout in scalable queue-based spin locks. In Proceedings of the Twenty-ﬁrst Annual Symposium on Principles of Distributed Computing, pages 31–40. ACM Press, 2002. [123] M. Scott and J. Mellor-Crummey. Fast, contention-free combining tree barriers. International Journal of Parallel Programming, 22(4), August 1994. [124] M. Scott and W. Scherer. Scalable queue-based spin locks with timeout. In Proceedings of the Eighth ACM SIGPLAN Symposium on Principles and Practices of Parallel Programming, pages 44–52, 2001.

© 2005 by Chapman & Hall/CRC

47-30

Handbook of Data Structures and Applications

[125] O. Shalev and N. Shavit. Split-ordered lists: Lock-free extensible hash tables. In The 22nd Annual ACM Symposium on Principles of Distributed Computing, pages 102–111. ACM Press, 2003. [126] N. Shavit and D. Touitou. Elimination trees and the construction of pools and stacks. Theory of Computing Systems, 30:645–670, 1997. [127] N. Shavit and D. Touitou. Software transactional memory. Distributed Computing, 10(2):99–116, February 1997. [128] N. Shavit and A. Zemach. Diﬀracting trees. ACM Transactions on Computer Systems, 14(4):385–428, 1996. [129] N. Shavit and A. Zemach. Scalable concurrent priority queue algorithms. In Pro-

[130] [131] [132]

[133] [134] [135] [136] [137]

ceedings of the Eighteenth Annual ACM Symposium on Principles of Distributed Computing, pages 113–122. ACM Press, 1999. N. Shavit and A. Zemach. Combining funnels: a dynamic approach to software combining. J. Parallel Distrib. Comput., 60(11):1355–1387, 2000. R. Sites. Alpha Architecture Reference Manual, 1992. H. Sundell and P. Tsigas. Fast and lock-free concurrent priority queues for multithread systems. In Proceedings of the 17th International Parallel and Distributed Processing Symposium, pages 84–94. IEEE press, 2003. R. Treiber. Systems programming: Coping with parallelism. Technical Report RJ5118, IBM Almaden Research Center, 1986. L. Valiant. Bulk-Synchronous Parallel Computers. Wiley, New York, NY, 1989. J. Valois. Lock-free linked lists using compare-and-swap. In ACM Symposium on Principles of Distributed Computing, pages 214–222, 1995. D. Weaver and T. Germond (Editors). The SPARC Architecture Manual (Version 9). PTR Prentice Hall, Englewood Cliﬀs, NJ), 1994. P. Yew, N. Tzeng, and D. Lawrie. Distributing hot-spot addressing in large-scale multiprocessors. IEEE Transactions on Computers, C-36(4):388–395, April 1987.

© 2005 by Chapman & Hall/CRC

VII Applications 48 IP Router Tables

Sartaj Sahni, Kun Suk Kim, and Haibin Lu . . . . . . . 48-1

Introduction • Longest Matching-Preﬁx • Highest-Priority Matching • Most-SpeciﬁcRange Matching

49 Multi-Dimensional Packet Classiﬁcation

Pankaj Gupta . . . . . . . . . . . . 49-1

Introduction • Performance Metrics for Classiﬁcation Algorithms Algorithms • Summary

50 Data Structures in Web Information Retrieval Introduction • Inverted Indices • Conclusions

•

Fingerprints

51 The Web as a Dynamic Graph

•

•

Classiﬁcation

Monika Henzinger 50-1

Finding Near-Duplicate Documents

S. N. Maheshwari . . . . . . . . . . . . . . . . . . . 51-1

Introduction • Experimental Observations • Theoretical Growth Models • Properties of Web Graphs and Web Algorithmics • Conclusions

52 Layout Data Structures

Dinesh P. Mehta . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-1

Introduction • VLSI Technology • Layout Data Structures: an Overview • Corner Stitching • Corner Stitching Extensions • Quad Trees and Variants • Concluding Remarks

53 Floorplan Representation in VLSI Zhou Feng, Bo Yao, and Chung-Kuan Cheng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-1 Introduction • Graph Based Representations • Placement Based Representations Relationships of the Representations • Rectilinear Shape Handling • Conclusions Acknowledgment

54 Computer Graphics

• •

Dale McMullin and Alyn Rockwood . . . . . . . . . . . . . 54-1

Introduction • Basic Applications Discussed Structures

•

Data Structures

•

Applications of Previously

55 Geographic Information Systems Bernhard Seeger and Peter Widmayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-1 Geographic Information Systems: What They Are All About • Space Filling Curves: Order in Many Dimensions • Spatial Join • Models, Toolboxes and Systems for Geographic Information

56 Collision Detection

Ming C. Lin and Dinesh Manocha . . . . . . . . . . . . . . . 56-1

Introduction • Convex Polytopes • General Polygonal Models Computation • Large Environments

•

Penetration Depth

57 Image Data Structures S. S. Iyengar, V. K. Vaishnavi, and S. Gunasekaran . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-1 Introduction • What is Image Data? • Quadtrees • Virtual Quadtrees • Quadtrees and R-trees • Octrees • Translation Invariant Data Structure (TID) • Content-Based Image Retrieval System • Summary • Acknowledgments

© 2005 by Chapman & Hall/CRC

Stefan Kurtz and Stefano Lonardi . . . . . . . . . . . 58-1

58 Computational Biology Introduction

•

Discovering Unusual Words

•

Comparing Whole Genomes

59 Elimination Structures in Scientiﬁc Computing Alex Pothen and Sivan Toledo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-1 The Elimination Tree • Applications of Etrees • The Clique Tree • Clique Covers and Quotient Graphs • Column Elimination Trees and Elimination DAGS

60 Data Structures for Databases Joachim Hammer and Markus Schneider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-1 Overview of the Functionality of a Database Management System • Data Structures for Query Processing • Data Structures for Buﬀer Management • Data Structures for Disk Space Management • Conclusion

61 Data Mining Introduction

•

Vipin Kumar, Pang-Ning Tan, and Michael Steinbach . . 61-1 Classiﬁcation

•

Association Analysis

•

Clustering

•

Conclusion

62 Computational Geometry: Fundamental Structures Mark de Berg and Bettina Speckmann . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-1 Introduction

•

Arrangements

•

Convex Hulls

•

Voronoi Diagrams

•

Triangulations

63 Computational Geometry: Proximity and Location Sunil Arya and David M. Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-1 Introduction • Point Location • Proximity Structures • Sources and Related Material

•

Nearest Neighbor Searching

64 Computational Geometry: Generalized Intersection Searching Prosenjit Gupta, Ravi Janardan, and Michiel Smid . . . . . . . . . . . . . . . . . . . . . . 64-1 Geometric Intersection Searching Problems • Summary of Known Results niques • Conclusion and Future Directions • Acknowledgment

© 2005 by Chapman & Hall/CRC

•

Tech-

48 IP Router Tables 48.1 48.2 University of Florida

48.3

University of Florida

48.1

Highest-Priority Matching . . . . . . . . . . . . . . . . . . . . . . . . 48-18 The Data Structure BOB • Search for the Highest-Priority Matching Range

University of Florida

Haibin Lu

48-1 48-4

Linear List • End-Point Array • Sets of Equal-Length Preﬁxes • Tries • Binary Search Trees • Priority Search Trees

Sartaj Sahni Kun Suk Kim

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Longest Matching-Preﬁx . . . . . . . . . . . . . . . . . . . . . . . . . .

48.4

Most-Speciﬁc-Range Matching . . . . . . . . . . . . . . . . . . . 48-21 Nonintersecting Ranges

•

Conﬂict-Free Ranges

Introduction

An Internet router classiﬁes incoming packets into ﬂows∗ utilizing information contained in packet headers and a table of (classiﬁcation) rules. This table is called the rule table (equivalently, router table). The packet-header information that is used to perform the classiﬁcation is some subset of the source and destination addresses, the source and destination ports, the protocol, protocol ﬂags, type of service, and so on. The speciﬁc header information used for packet classiﬁcation is governed by the rules in the rule table. Each rule-table rule is a pair of the form (F, A), where F is a ﬁlter and A is an action. The action component of a rule speciﬁes what is to be done when a packet that satisﬁes the rule ﬁlter is received. Sample actions are drop the packet, forward the packet along a certain output link, and reserve a speciﬁed amount of bandwidth. A rule ﬁlter F is a tuple that is comprised of one or more ﬁelds. In the simplest case of destination-based packet forwarding, F has a single ﬁeld, which is a destination (address) preﬁx and A is the next hop for packets whose destination address has the speciﬁed preﬁx. For example, the rule (01∗, a) states that the next hop for packets whose destination address (in binary) begins with 01 is a. IP (Internet Protocol) multicasting uses rules in which F is comprised of the two ﬁelds source preﬁx and destination preﬁx; QoS routers may use ﬁve-ﬁeld rule ﬁlters (source-address preﬁx, destination-address preﬁx, source-port range, destination-port range, and protocol); and ﬁrewall ﬁlters may have one or more ﬁelds. In the d-dimensional packet classiﬁcation problem, each rule has a d-ﬁeld ﬁlter. In this chapter, we are concerned solely with 1-dimensional packet classiﬁcation. It should be noted, that data structures for multidimensional packet classiﬁcation are usually built on top of

∗A

flow is a set of packets that are to be treated similarly for routing purposes.

48-1

© 2005 by Chapman & Hall/CRC

48-2

Handbook of Data Structures and Applications Preﬁx Name P1 P2 P3 P4 P5

Preﬁx * 0101* 100* 1001* 10111

Range Start 0 10 16 18 23

Range Finish 31 11 19 19 23

FIGURE 48.1: Preﬁxes and their ranges. data structures for 1-dimensional packet classiﬁcation. Therefore, the study of data structures for 1-dimensional packet classiﬁcation is fundamental to the design and development of data structures for d-dimensional, d > 1, packet classiﬁcation. For the 1-dimensional packet classiﬁcation problem, we assume that the single ﬁeld in the ﬁlter is the destination ﬁeld and that the action is the next hop for the packet. With these assumptions, 1-dimensional packet classiﬁcation is equivalent to the destination-based packet forwarding problem. Henceforth, we shall use the terms rule table and router table to mean tables in which the ﬁlters have a single ﬁeld, which is the destination address. This single ﬁeld of a ﬁlter may be speciﬁed in one of two ways: 1. As a range. For example, the range [35, 2096] matches all destination addresses d such that 35 ≤ d ≤ 2096. 2. As an address/mask pair. Let xi denote the ith bit of x. The address/mask pair a/m matches all destination addresses d for which di = ai for all i for which mi = 1. That is, a 1 in the mask speciﬁes a bit position in which d and a must agree, while a 0 in the mask speciﬁes a don’t care bit position. For example, the address/mask pair 101100/011101 matches the destination addresses 101100, 101110, 001100, and 001110. When all the 1-bits of a mask are to the left of all 0-bits, the address/mask pair speciﬁes an address preﬁx. For example, 101100/110000 matches all destination addresses that have the preﬁx 10 (i.e., all destination addresses that begin with 10). In this case, the address/mask pair is simply represented as the preﬁx 10*, where the * denotes a sequence of don’t care bits. If W is the length, in bits, of a destination address, then the * in 10* represents all sequences of W − 2 bits. In IPv4 the address and mask are both 32 bits, while in IPv6 both of these are 128 bits. Notice that every preﬁx may be represented as a range. For example, when W = 6, the preﬁx 10* is equivalent to the range [32, 47]. A range that may be speciﬁed as a preﬁx for some W is called a preﬁx range. The speciﬁcation 101100/011101 may be abbreviated to ?011?0, where ? denotes a don’t-care bit. This speciﬁcation is not equivalent to any single range. Also, the range speciﬁcation [3,6] isn’t equivalent to any single address/mask speciﬁcation. Figure 48.1 shows a set of ﬁve preﬁxes together with the start and ﬁnish of the range for each. This ﬁgure assumes that W = 5. The preﬁx P1 = *, which matches all legal destination addresses, is called the default preﬁx. Suppose that our router table is comprised of ﬁve rules R1–R5 and that the ﬁlters for these ﬁve rules are P1–P5, respectively. Let N1–N5, respectively, be the next hops for these ﬁve rules. The destination address 18 is matched by rules R1, R3, and R5 (equivalently, by preﬁxes P1, P3, and P5). So, N1, N3, and N5 are candidates for the next hop for incoming packets that are destined for address 18. Which of the matching rules (and associated action) should be selected? When more than one rule matches an incoming packet, a tie

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-3

occurs. To select one of the many rules that may match an incoming packet, we use a tie breaker. Let RS be the set of rules in a rule table and let F S be the set of ﬁlters associated with these rules. rules(d, RS) (or simply rules(d) when RS is implicit) is the subset of rules of RS that match/cover the destination address d. f ilters(d, F S) and f ilters(d) are deﬁned similarly. A tie occurs whenever |rules(d)| > 1 (equivalently, |f ilters(d)| > 1). Three popular tie breakers are: 1. First matching rule in table. The rule table is assumed to be a linear list ([15]) of rules with the rules indexed 1 through n for an n-rule table. The action corresponding to the ﬁrst rule in the table that matches the incoming packet is used. In other words, for packets with destination address d, the rule of rules(d) that has least index is selected. For our example router table corresponding to the ﬁve preﬁxes of Figure 48.1, rule R1 is selected for every incoming packet, because P1 matches every destination address. When using the ﬁrst-matching-rule criteria, we must index the rules carefully. In our example, P1 should correspond to the last rule so that every other rule has a chance to be selected for at least one destination address. 2. Highest-priority rule. Each rule in the rule table is assigned a priority. From among the rules that match an incoming packet, the rule that has highest priority wins is selected. To avoid the possibility of a further tie, rules are assigned diﬀerent priorities (it is actually suﬃcient to ensure that for every destination address d, rules(d) does not have two or more highest-priority rules). Notice that the ﬁrst-matching-rule criteria is a special case of the highest-priority criteria (simply assign each rule a priority equal to the negative of its index in the linear list). 3. Most-speciﬁc-rule matching. The ﬁlter F 1 is more speciﬁc than the ﬁlter F 2 iﬀ F 2 matches all packets matched by F 1 plus at least one additional packet. So, for example, the range [2, 4] is more speciﬁc than [1, 6], and [5, 9] is more speciﬁc than [5, 12]. Since [2, 4] and [8, 14] are disjoint (i.e., they have no address in common), neither is more speciﬁc than the other. Also, since [4, 14] and [6, 20] intersect† , neither is more speciﬁc than the other. The preﬁx 110* is more speciﬁc than the preﬁx 11*. In most-speciﬁc-rule matching, ties are broken by selecting the matching rule that has the most speciﬁc ﬁlter. When the ﬁlters are destination preﬁxes, the most-speciﬁc-rule that matches a given destination d is the longest‡ preﬁx in f ilters(d). Hence, for preﬁx ﬁlters, the most-speciﬁc-rule tie breaker is equivalent to the longest-matching-preﬁx criteria used in router tables. For our example rule set, when the destination address is 18, the longest matching-preﬁx is P4. When the ﬁlters are ranges, the most-speciﬁc-rule tie breaker requires us to select the most speciﬁc range in f ilters(d). Notice also that most-speciﬁc-range matching is a special case of the the highest-priority rule. For example, when the ﬁlters are preﬁxes, set the preﬁx priority equal to the preﬁx length. For the case of ranges, the range priority equals the negative of the range size.

† Two

ranges [u, v] and [x, y] intersect iﬀ u < x ≤ v < y ∨ x < u ≤ y < v. length of a preﬁx is the number of bits in that preﬁx (note that the * is not used in determining preﬁx length). The length of P1 is 0 and that of P2 is 4. ‡ The

© 2005 by Chapman & Hall/CRC

48-4

Handbook of Data Structures and Applications

In a static rule table, the rule set does not vary in time. For these tables, we are concerned primarily with the following metrics: 1. Time required to process an incoming packet. This is the time required to search the rule table for the rule to use. 2. Preprocessing time. This is the time to create the rule-table data structure. 3. Storage requirement. That is, how much memory is required by the rule-table data structure? In practice, rule tables are seldom truly static. At best, rules may be added to or deleted from the rule table infrequently. Typically, in a “static” rule table, inserts/deletes are batched and the rule-table data structure reconstructed as needed. In a dynamic rule table, rules are added/deleted with some frequency. For such tables, inserts/deletes are not batched. Rather, they are performed in real time. For such tables, we are concerned additionally with the time required to insert/delete a rule. For a dynamic rule table, the initial rule-table data structure is constructed by starting with an empty data structures and then inserting the initial set of rules into the data structure one by one. So, typically, in the case of dynamic tables, the preprocessing metric, mentioned above, is very closely related to the insert time. In this paper, we focus on data structures for static and dynamic router tables (1dimensional packet classiﬁcation) in which the ﬁlters are either preﬁxes or ranges.

48.2 48.2.1

Longest Matching-Preﬁx Linear List

In this data structure, the rules of the rule table are stored as a linear list ([15]) L. Let LM P (d) be the longest matching-preﬁx for address d. LM P (d) is determined by examining the preﬁxes in L from left to right; for each preﬁx, we determine whether or not that preﬁx matches d; and from the set of matching preﬁxes, the one with longest length is selected. To insert a rule q, we ﬁrst search the list L from left to right to ensure that L doesn’t already have a rule with the same ﬁlter as does q. Having veriﬁed this, the new rule q is added to the end of the list. Deletion is similar. The time for each of the operations determine LM P (d), insert a rule, delete a rule is O(n), where n is the number of rules in L. The memory required is also O(n). Note that this data structure may be used regardless of the form of the ﬁlter (i.e., ranges, Boolean expressions, etc.) and regardless of the tie breaker in use. The time and memory complexities are unchanged. Although the linear list is not a suitable data structure for a purely software implementation of a router table with a large number of preﬁxes, it is leads to a very practical solution using TCAMs (ternary content-addressable memories) [28, 34]. Each memory cell of a TCAM may be set to one of three states 0, 1, and don’t care. The preﬁxes of a router table are stored in a TCAM in descending order of preﬁx length. Assume that each word of the TCAM has 32 cells. The preﬁx 10* is stored in a TCAM word as 10???...?, where ? denotes a don’t care and there are 30 ?s in the given sequence. To do a longest-preﬁx match, the destination address is matched, in parallel, against every TCAM entry and the ﬁrst (i.e., longest) matching entry reported by the TCAM arbitration logic. So, using a TCAM and a sorted-by-length linear list, the longest matching-preﬁx can be determined in O(1) time. A preﬁx may be inserted or deleted in O(W ) time, where W is the length of

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-5 0 r1 P2 r2

10 11

r3 16

P1

r4

P3

P4 r5

18 19

r6 23

P5 r7

31

(a)

EndPoint 0 10 11 16 18 19 23 31

> P1 P2 P1 P3 P4 P1 P1 −

= P1 P2 P2 P3 P4 P4 P5 P1

(b)

FIGURE 48.2: (a) Pictorial representation of preﬁxes and ranges (b) Array for binary search. the longest preﬁx [28]§ . For example, an insert of a preﬁx of length 3 (say) can be done by relocating a the ﬁrst preﬁx of length 1 to the end of the list; ﬁlling the vacated slot with the ﬁrst preﬁx of length 2; and ﬁnally ﬁlling this newly vacated spot with the preﬁx of length 3 that is to be inserted. Despite the simplicity and eﬃciency of using TCAMs, TCAMs present problems in real applications [3]. For example, TCAMs consume a lot of power and board area.

48.2.2

End-Point Array

Lampson, Srinivasan, and Varghese [17] have proposed a data structure in which the end points of the ranges deﬁned by the preﬁxes are stored in ascending order in an array. LM P (d) is found by performing a binary search on this ordered array of end points. Preﬁxes and their ranges may be drawn as nested rectangles as in Figure 48.2(a), which gives the pictorial representation of the ﬁve preﬁxes of Figure 48.1. In the data structure of Lampson et al. [17], the distinct range end-points are stored in ascending order as in Figure 48.2(b). The distinct end-points (range start and ﬁnish points) for the preﬁxes of Figure 48.1 are [0, 10, 11, 16, 18, 19, 23, 31]. Let ri , 1 ≤ i ≤ q ≤ 2n be the distinct range end-points for a set of n preﬁxes. Let rq+1 = ∞. With each distinct range end-point, ri , 1 ≤ i ≤ q, the array stores LM P (d) for d such that (a) ri < d < ri+1 (this is the column labeled “>” in Figure 48.2(b)) and (b) ri = d (column labeled “=”). Now, LM P (d), r1 ≤ d ≤ rq can be determined in O(log n) time by performing a binary search to ﬁnd the unique i such that ri ≤ d < ri+1 . If ri = d, LM P (d) is given by the “=” entry; otherwise, it is given by the “>” entry. For example, since d = 20 satisﬁes 19 ≤ d < 23 and since d = 19, the “>” entry of the end point 19 is used to determine that LM P (20) is P1. As noted by Lampson et al. [17], the range end-point table can be built in O(n) time (this assumes that the end points are available in ascending order). Unfortunately, as stated in [17], updating the range end-point table following the insertion or deletion of a preﬁx also takes O(n) time because O(n) “>” and/or “=” entries may change. Although Lampson

§ More

precisely, W may be deﬁned to be the number of diﬀerent preﬁx lengths in the table.

© 2005 by Chapman & Hall/CRC

48-6

Handbook of Data Structures and Applications

et al. [17] provide ways to reduce the complexity of the search for the LMP by a constant factor, these methods do not result in schemes that permit preﬁx insertion and deletion in O(log n) time. It should be noted that the end-point array may be used even when ties are broken by selecting the ﬁrst matching rule or the highest-priority matching rule. Further, the method applies to the case when the ﬁlters are arbitrary ranges rather than simply preﬁxes. The complexity of the preprocessing step (i.e., creation of the array of ordered end-points) and the search for the rule to use is unchanged. Further, the memory requirements are the same, O(n) for an n-rule table, regardless of the tie breaker and whether the ﬁlters are preﬁxes or general ranges.

48.2.3

Sets of Equal-Length Preﬁxes

Waldvogel et al. [32] have proposed a data structure to determine LM P (d) by performing a binary search on preﬁx length. In this data structure, the preﬁxes in the router table T are partitioned into the sets S0 , S1 , ... such that Si contains all preﬁxes of T whose length is i. For simplicity, we assume that T contains the default preﬁx *. So, S0 = {∗}. Next, each Si is augmented with markers that represent preﬁxes in Sj such that j > i and i is on the binary search path to Sj . For example, suppose that the length of the longest preﬁx of T is 32 and that the length of LM P (d) is 22. To ﬁnd LM P (d) by a binary search on length, we will ﬁrst search S16 for an entry that matches the ﬁrst 16 bits of d. This search¶ will need to be successful for us to proceed to a larger length. The next search will be in S24 . This search will need to fail. Then, we will search S20 followed by S22 . So, the path followed by a binary search on length to get to S22 is S16 , S24 , S20 , and S22 . For this to be followed, the searches in S16 , S20 , and S22 must succeed while that in S24 must fail. Since the length of LM P (d) is 22, T has no matching preﬁx whose length is more than 22. So, the search in S24 is guaranteed to fail. Similarly, the search in S22 is guaranteed to succeed. However, the searches in S16 and S20 will succeed iﬀ T has matching preﬁxes of length 16 and 20. To ensure success, every length 22 preﬁx P places a marker in S16 and S20 , the marker in S16 is the ﬁrst 16 bits of P and that in S20 is the ﬁrst 20 bits in P . Note that a marker M is placed in Si only if Si doesn’t contain a preﬁx equal to M . Notice also that for each i, the binary search path to Si has O(log lmax ) = O(log W ), where lmax is the length of the longest preﬁx in T , Sj s on it. So, each preﬁx creates O(log W ) markers. With each marker M in Si , we record the longest preﬁx of T that matches M (the length of this longest matching-preﬁx is necessarily smaller than i). To determine LM P (d), we begin by setting lef tEnd = 0 and rightEnd = lmax . The repetitive step of the binary search requires us to search for an entry in Sm , where m = (lef tEnd + rightEnd)/2, that equals the ﬁrst m bits of d. If Sm does not have such an entry, set rightEnd = m − 1. Otherwise, if the matching entry is the preﬁx P , P becomes the longest matching-preﬁx found so far. If the matching entry is the marker M , the preﬁx recorded with M is the longest matching-preﬁx found so far. In either case, set lef tEnd = m + 1. The binary search terminates when lef tEnd > rightEnd. One may easily establish the correctness of the described binary search. Since, each preﬁx creates O(log W ) markers, the memory requirement of the scheme is O(n log W ). When each set Si is represented as a hash table, the data structure is called SELPH (sets of equal length preﬁxes using hash tables). The expected time to ﬁnd LM P (d) is O(log W ) when

¶ When

searching Si , only the ﬁrst i bits of d are used, because all preﬁxes in Si have exactly i bits.

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-7

the router table is represented as an SELPH. When inserting a preﬁx, O(log W ) markers must also be inserted. With each marker, we must record a longest-matching preﬁx. The expected time to ﬁnd these longest matching-preﬁxes is O(log2 W ). In addition, we may need to update the longest-matching preﬁx information stored with the O(n log W ) markers at lengths greater than the length of the newly inserted preﬁx. This takes O(n log2 W ) time. So, the expected insert time is O(n log2 W ). When deleting a preﬁx P , we must search all hash tables for markers M that have P recorded with them and then update the recorded preﬁx for each of these markers. For hash tables with a bounded loading density, the expected time for a delete (including marker-preﬁx updates) is O(n log2 W ). Waldvogel et al. [32] have shown that by inserting the preﬁxes in ascending order of length, an n-preﬁx SELPH may be constructed in O(n log2 W ) time.

When each set is represented as a balanced search tree (see Chapter 10), the data structure is called SELPT. In an SELPT, the time to ﬁnd LM P (d) is O(log n log W ); the insert time is O(n log n log2 W ); the delete time is O(n log n log2 W ); and the time to construct the data structure for n preﬁxes is O(W + n log n log2 W ).

In the full version of [32], Waldvogel et al. show that by using a technique called marker partitioning, the SELPH data structure √ may be modiﬁed to have a search time of O(α + log W ) and an insert/delete time of O(α α nW log W ), for any α > 1.

Because of the excessive insert and delete times, the sets of equal-length preﬁxes data structure is suitable only for static router tables. Note that in an actual implementation of SELPH or SELPT, we need only keep the non-empty Si s and do a binary search over the collection of non-empty Si s. Srinivasan and Varghese [30] have proposed the use of controlled preﬁx-expansion to reduce the number of non-empty sets Si . The details of their algorithm to reduce the number of lengths are given in [29]. The complexity of their algorithm is O(nW 2 ), where n is the number of preﬁxes, and W is the length of the longest preﬁx. The algorithm of [29] does not minimize the storage required by the preﬁxes and markers for the resulting set of preﬁxes. Kim and Sahni [16] have developed an algorithm that minimizes storage requirement but takes O(nW 3 + kW 4 ) time, where k is the desired number of non-empty Si s. Additionally, Kim and Sahni [16] propose improvements to the heuristic of [29].

We note that Waldvogel’s scheme is very similar to the k-ary search-on-length scheme developed by Berg et al. [4] and the binary search-on-length schemes developed by Willard [33]. Berg et al. [4] use a variant of stratiﬁed trees [10] for one-dimensional point location in a set of n disjoint ranges. Willard [33] modiﬁed stratiﬁed trees and proposed the y-fast trie data structure to search a set of disjoint ranges. By decomposing ﬁlter ranges that are not disjoint into disjoint ranges, the schemes of [4, 33] may be used for longest-preﬁx matching in static router tables. The asymptotic complexity for a search using the schemes of [4, 33] is the same as that of Waldvogel’s scheme. The decomposition of overlapping ranges into disjoint ranges is feasible for static router tables but not for dynamic router tables because a large range may be decomposed into O(n) disjoint small ranges.

© 2005 by Chapman & Hall/CRC

48-8

48.2.4

Handbook of Data Structures and Applications

Tries

1-Bit Tries

A 1-bit trie is a tree-like structure in which each node has a left child, left data, right child, and right data ﬁeld. Nodes at level l − 1 of the trie store preﬁxes whose length is l. If the rightmost bit in a preﬁx whose length is l is 0, the preﬁx is stored in the left data ﬁeld of a node that is at level l − 1; otherwise, the preﬁx is stored in the right data ﬁeld of a node that is at level l − 1. At level i of a trie, branching is done by examining bit i (bits are numbered from left to right beginning with the number 0) of a preﬁx or destination address. When bit i is 0, we move into the left subtree; when the bit is 1, we move into the right subtree. Figure 48.3(a) gives the preﬁxes in the 8-preﬁx example of [30], and Figure 48.3(b) shows the corresponding 1-bit trie. The preﬁxes in Figure 48.3(a) are numbered and ordered as in [30].

N0 P5 P4 N21 Original prefixes P5=0* P1=10* P2=111* P3=11001* P4=1* P6=1000* P7=100000* P8=1000000* (a) 8-preﬁx example of [30]

N41

N6 P8

N5 P7

N1

P1

N31 P6

N22 P2 N32

P3 N42

(b) Corresponding 1-bit trie

FIGURE 48.3: Preﬁxes and corresponding 1-bit trie.

The 1-bit tries described here are an extension of the 1-bit tries described in [15]. The primary diﬀerence being that the 1-bit tries of [15] are for the case when no key is a preﬁx of another. Since in router-table applications, this condition isn’t satisﬁed, the 1-bit trie representation of [15] is extended so that keys of length l are stored in nodes at level l − 1 of the trie. Note that at most two keys may be stored in a node; one of these has bit l equal to 0 and other has this bit equal to 1. In this extension, every node of the 1-bit trie has 2 child pointers and 2 data ﬁelds. The height of a 1-bit trie is O(W ). For any destination address d, all preﬁxes that match d lie on the search path determined by the bits of d. By following this search path, we may determine the longest matching-

Level

numbers are assigned beginning with 0 for the root level.

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-9

preﬁx, the ﬁrst preﬁx in the table that matches d, as well as the highest-priority matchingpreﬁx in O(W ) time. Further, preﬁxes may be inserted/deleted in O(W ) time. The memory required by the 1-bit trie is O(nW ). IPv4 backbone routers may have more than 100 thousand preﬁxes. Even though the preﬁxes in a backbone router may have any length between 0 and W , there is a concentration of preﬁxes at lengths 16 and 24, because in the early days of the Internet, Internet address assignment was done by classes. All addresses in a class B network have the same ﬁrst 16 bits, while addresses in the same class C network agree on the ﬁrst 24 bits. Addresses in class A networks agree on their ﬁrst 8 bits. However, there can be at most 256 class A networks (equivalently, there can be at most 256 8-bit preﬁxes in a router table). For our backbone routers that occur in practice [24], the number of nodes in a 1-bit trie is between 2n and 3n. Hence, in practice, the memory required by the 1-bit-trie representation is O(n).

Fixed-Stride Tries

Since the trie of Figure 48.3(b) has a height of 6, a search into this trie may make up to 7 memory accesses, one access for each node on the path from the root to a node at level 6 of the trie. The total memory required for the 1-bit trie of Figure 48.3(b) is 20 units (each node requires 2 units, one for each pair of (child, data) ﬁelds). When 1-bit tries are used to represent IPv4 router tables, the trie height may be as much as 31. A lookup in such a trie takes up to 32 memory accesses. Degermark et al. [8] and Srinivasan and Varghese [30] have proposed the use of ﬁxedstride tries to enable fast identiﬁcation of the longest matching preﬁx in a router table. The stride of a node is deﬁned to be the number of bits used at that node to determine which branch to take. A node whose stride is s has 2s child ﬁelds (corresponding to the 2s possible values for the s bits that are used) and 2s data ﬁelds. Such a node requires 2s memory units. In a ﬁxed-stride trie (FST), all nodes at the same level have the same stride; nodes at diﬀerent levels may have diﬀerent strides. Suppose we wish to represent the preﬁxes of Figure 48.3(a) using an FST that has three levels. Assume that the strides are 2, 3, and 2. The root of the trie stores preﬁxes whose length is 2; the level one nodes store preﬁxes whose length is 5 (2 + 3); and level three nodes store preﬁxes whose length is 7 (2 + 3 + 2). This poses a problem for the preﬁxes of our example, because the length of some of these preﬁxes is diﬀerent from the storeable lengths. For instance, the length of P5 is 1. To get around this problem, a preﬁx with a nonpermissible length is expanded to the next permissible length. For example, P5 = 0* is expanded to P5a = 00* and P5b = 01*. If one of the newly created preﬁxes is a duplicate, natural dominance rules are used to eliminate all but one occurrence of the preﬁx. For instance, P4 = 1* is expanded to P4a = 10* and P4b = 11*. However, P1 = 10* is to be chosen over P4a = 10*, because P1 is a longer match than P4. So, P4a is eliminated. Because of the elimination of duplicate preﬁxes from the expanded preﬁx set, all preﬁxes are distinct. Figure 48.4(a) shows the preﬁxes that result when we expand the preﬁxes of Figure 48.3 to lengths 2, 5, and 7. Figure 48.4(b) shows the corresponding FST whose height is 2 and whose strides are 2, 3, and 2. Since the trie of Figure 48.4(b) can be searched with at most 3 memory references, it represents a time performance improvement over the 1-bit trie of Figure 48.3(b), which requires up to 7 memory references to perform a search. However, the space requirements of the FST of Figure 48.4(b) are more than that of the corresponding 1-bit trie. For the root of the FST, we need 8 ﬁelds or 4 units; the two level 1 nodes require 8 units each; and the level 3 node requires 4 units. The total is 24 memory units.

© 2005 by Chapman & Hall/CRC

48-10

Handbook of Data Structures and Applications

Expanded prefixes (3 levels) 00* (P5a) 01* (P5b) 10* (P1) 11* (P4) 11100* (P2a) 11101* (P2b) 11110* (P2c) 11111* (P2d) 11001* (P3) 10000* (P6a) 10001* (P6b) 1000001* (P7) 1000000* (P8) (a) Expanded ﬁxes

pre-

P5 P5 P1 P4 000 001 010 011 100 101 110 111

P6 P6 − − − − − −

00 01 10 11 − P3 − − P2 P2 P2 P2

000 001 010 011 100 101 110 111 P8 P7 − −

00 01 10 11

(b) Corresponding ﬁxed-stride trie

FIGURE 48.4: Preﬁx expansion and ﬁxed-stride trie. We may represent the preﬁxes of Figure 48.3(a) using a one-level trie whose root has a stride of 7. Using such a trie, searches could be performed making a single memory access. However, the one-level trie would require 27 = 128 memory units. For IPv4 preﬁx sets, Degermark et al. [8] propose the use of a three-level trie in which the strides are 16, 8, and 8. They propose encoding the nodes in this trie using bit vectors to reduce memory requirements. The resulting data structure requires at most 12 memory accesses. However, inserts and deletes are quite expensive. For example, the insertion of the preﬁx 1* changes up to 215 entries in the trie’s root node. All of these changes may propagate into the compacted storage scheme of [8]. Lampson et al. [17] have proposed the use of hybrid data structures comprised of a stride16 root and an auxiliary data structure for each of the subtries of the stride-16 root. This auxiliary data structure could be the end-point array of Section 48.2.2 (since each subtrie is expected to contain only a small number of preﬁxes, the number of end points in each end-point array is also expected to be quite small). An alternative auxiliary data structure suggested by Lampson et al. [17] is a 6-way search tree for IPv4 router tables. In the case of these 6-way trees, the keys are the remaining up to 16 bits of the preﬁx (recall that the stride-16 root consumes the ﬁrst 16 bits of a preﬁx). For IPv6 preﬁxes, a multicolumn scheme is suggested [17]. None of these proposed structures is suitable for a dynamic table. In the ﬁxed-stride trie optimization (FSTO) problem, we are given a set P of preﬁxes and an integer k. We are to select the strides for a k-level FST in such a manner that the k-level FST for the given preﬁxes uses the smallest amount of memory. For some P , a k-level FST may actually require more space than a (k − 1)-level FST. For example, when P = {00*, 01*, 10*, 11*}, the unique 1-level FST for P requires 4 memory units while the unique 2-level FST (which is actually the 1-bit trie for P ) requires 6 memory units. Since the search time for a (k − 1)-level FST is less than that for a k-level tree, we

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-11

would actually prefer (k − 1)-level FSTs that take less (or even equal) memory over k-level FSTs. Therefore, in practice, we are really interested in determining the best FST that uses at most k levels (rather than exactly k levels). The modiﬁed MSTO problem (MFSTO) is to determine the best FST that uses at most k levels for the given preﬁx set P . Let O be the 1-bit trie for the given set of preﬁxes, and let F be any k-level FST for this preﬁx set. Let s0 , ..., sk−1 be the strides for F . We shall say that level 0 of F covers levels0, ..., s0 − 1 of O,and that level j, 0 < j < k of F covers levels a, ..., b of O, where j−1 j a = 0 sq and b = 0 sq − 1. So, level 0 of the FST of Figure 48.4(b) covers levels 0 and 1 of the 1-bit trie of Figure 48.3(b). Level 1 of this FST covers levels 2, 3, and 4 of the 1-bit trie of Figure 48.3(b); and u level 2 of this FST covers levels 5 and 6 of the 1-bit trie. We shall refer to levels eu = 0 sq , 0 ≤ u < k as the expansion levels of O. The expansion levels deﬁned by the FST of Figure 48.4(b) are 0, 2, and 5. Let nodes(i) be the number of nodes at level i of the 1-bit trie O. For the 1-bit trie of Figure 48.3(a), nodes(0 : 6) = [1, 1, 2, 2, 2, 1, 1]. The memory required by F is k−1 nodes(eq ) ∗ 2sq . For example, the memory required by the FST of Figure 48.4(b) is 0 nodes(0) ∗ 22 + nodes(2) ∗ 23 + nodes(5) ∗ 22 = 24. Let C(j, r) be the cost of the best FST that uses at most r expansion levels. A simple dynamic programming recurrence for C is [24]: C(j, r)

=

min

m∈{−1..j−1}

{C(m, r − 1) +

nodes(m + 1) ∗ 2j−m }, j ≥ 0, r > 1 C(−1, r) = 0 and C(j, 1) = 2j+1 , j ≥ 0

(48.1) (48.2)

Let M (j, r), r > 1, be the smallest m that minimizes C(m, r − 1) + nodes(m + 1) ∗ 2j−m , in Equation 48.1. THEOREM 48.1 1)}].

[Sahni and Kim [24]] ∀(j ≥ 0, k > 2)[M (j, k) ≥ max{M (j−1, k), M (j, k−

Theorem 48.1 results in an algorithm to compute C(W − 1, k) in O(kW 2 ). Using the computed M values, the strides for the OFST that uses at most k expansion levels may be determined in an additional O(k) time. Although the resulting algorithm has the same asymptotic complexity as does the optimization algorithm of Srinivasan and Varghese [30], experiments conducted by Sahni and Kim [24] using real IPv4 preﬁx-data-sets indicate that the algorithm based on Theorem 48.1 runs 2 to 4 times as fast. Basu and Narliker [2] consider implementing FST router tables on a pipelined architecture. Each level of the FST is assigned to a unique pipeline stage. The optimization problem to be solved in this application requires an FST that has a number of levels no more than the number of pipeline stages, the memory required per level should not exceed the available per stage memory, and the total memory required is minimum subject to the stated constraints. Variable-Stride Tries

In a variable-stride trie (VST) [30], nodes at the same level may have diﬀerent strides. Figure 48.5 shows a two-level VST for the 1-bit trie of Figure 48.3. The stride for the root

© 2005 by Chapman & Hall/CRC

48-12

Handbook of Data Structures and Applications

P5 P5 P1 P4 00000 00001 00010 00011 00100 00101 00110 00111 ...

P8 P7 P6 P6 P6 P6 P6 P6 ...

11100 11101 11110 11111

− − − −

00 01 10 11 000 001 010 011 100 101 110 111

− P3 − − P2 P2 P2 P2

FIGURE 48.5: Two-level VST for preﬁxes of Figure 48.3(a). is 2; that for the left child of the root is 5; and that for the root’s right child is 3. The memory requirement of this VST is 4 (root) + 32 (left child of root) + 8 (right child of root) = 44. Since FSTs are a special case of VSTs, the memory required by the best VST for a given preﬁx set P and number of expansion levels k is less than or equal to that required by the best FST for P and k. Despite this, FSTs may be preferred in certain router applications “because of their simplicity and slightly faster search time” [30]. Let r-VST be a VST that has at most r levels. Let Opt(N, r) be the cost (i.e., memory requirement) of the best r-VST for a 1-bit trie whose root is N . Nilsson and Karlsson [23] propose a greedy heuristic to construct optimal VSTs. The resulting VSTs are known as LC-tries (level-compressed tries) and were ﬁrst proposed in a more general context by Andersson and Nilsson [1]. An LC-tries obtained from a 1-bit trie by replacing full subtries of the 1-bit trie by single multibit nodes. This replacement is done by examining the 1-bit trie top to bottom (i.e., from root to leaves). Srinivasan and Varghese [30], have obtained the following dynamic programming recurrence for Opt(N, r). Opt(N, r)

=

min s∈{1...1+height(N )}

{2s +

Opt(M, r − 1)}, r > 1

(48.3)

M∈Ds (N )

where Ds (N ) is the set of all descendants of N that are at level s of N . For example, D1 (N ) is the set of children of N and D2 (N ) is the set of grandchildren of N . height(N ) is the maximum level at which the trie rooted at N has a node. For example, in Figure 48.3(b), the height of the trie rooted at N1 is 5. When r = 1, Opt(N, 1) = 21+height(N )

© 2005 by Chapman & Hall/CRC

(48.4)

IP Router Tables

48-13

Srinivasan and Varghese [30], describe a way to determine Opt(R, k) using Equations 48.3 and 48.4. The complexity of their algorithm is O(p ∗ W ∗ k), where p is the number of nodes in the 1-bit trie for the preﬁxes (p = O(n) for realistic router tables). Sahni and Kim [25] provide an alternative way to compute Opt(R, k) in O(pW k) time. The algorithm of [25], however, performs fewer operations and has fewer cache misses. When the cost of operations dominates the run time, the algorithm of [25] is expected to be about 6 times as fast as that of [30] (for available router databases). When cache miss time dominates the run time, the algorithm of [25] could be 12 times as fast when k = 2 and 42 times as fast when k = 7. We describe the formulation used in [25]. Let Opt(N, s, r) = Opt(M, r), s > 0, r > 1, M∈Ds (N )

and let Opt(N, 0, r) = Opt(N, r). From Equations 48.3 and 48.4, it follows that: Opt(N, 0, r)

=

mins∈{1...1+height(N )} {2s + Opt(N, s, r − 1)}, r > 1

(48.5)

and Opt(N, 0, 1) = 21+height(N ) . For s > 0 and r > 1, we get Opt(N, s, r)

=

(48.6)

Opt(M, r)

M∈Ds (N )

= Opt(Lef tChild(N ), s − 1, r) + Opt(RightChild(N ), s − 1, r).

(48.7)

For Equation 48.7, we need the following initial condition: Opt(null, ∗, ∗) = 0

(48.8)

With the assumption that the number of nodes in the 1-bit trie is O(n), we see that the number of Opt(∗, ∗, ∗) values is O(nW k). Each Opt(∗, ∗, ∗) value may be computed in O(1) time using Equations 48.5 through 48.8 provided the Opt values are computed in postorder. Therefore, we may compute Opt(R, k) = Opt(R, 0, k) in O(pW k) time. The algorithm of [25] requires O(W 2 k) memory for the Opt(∗, ∗, ∗) values. To see this, notice that there can be at most W + 1 nodes N whose Opt(N, ∗, ∗) values must be retained at any given time, and for each of these at most W + 1 nodes, O(W k) Opt(N, ∗, ∗) values must be retained. To determine the optimal strides, each node of the 1-bit trie must store the stride s that minimizes the right side of Equation 48.5 for each value of r. For this purpose, each 1-bit trie node needs O(k) space. Since the 1-bit trie has O(n) nodes in practice, the memory requirements of the 1-bit trie are O(nk). The total memory required is, therefore, O(nk + W 2 k). In practice, we may prefer an implementation that uses considerably more memory. If we associate a cost array with each of the p nodes of the 1-bit trie, the memory requirement increases to O(pW k). The advantage of this increased memory implementation is that the optimal strides can be recomputed in O(W 2 k) time (rather than O(pW k)) following each insert or delete of a preﬁx. This is so because, the Opt(N, ∗, ∗) values need be recomputed only for nodes along the insert/delete path of the 1-bit trie. There are O(W ) such nodes. Faster algorithms to determine optimal 2- and 3-VSTs also are developed in [25].

© 2005 by Chapman & Hall/CRC

48-14

Handbook of Data Structures and Applications

P1

18 11

23

10

16 r2

r3

19 r4 r5

16 P3

31 r6

10 P2

r7

0

0 r1

r1

(a)

11 r3

19 r6

23 r7

(b)

P3

P2 10 r2

P4 18 P4

16 r4

(c)

(d)

18 r5

P5

(e)

(f)

FIGURE 48.6: CBST for Figure 48.2(a). (a) base interval tree (b) preﬁx tree for P1 (c) preﬁx tree for P2 (d) preﬁx tree for P3 (e) preﬁx tree for P4 (f) preﬁx tree for P5.

48.2.5

Binary Search Trees

Sahni and Kim [26] propose the use of a collection of red-black trees (see Chapter 10) to determine LM P (d). The CRBT comprises a front-end data structure that is called the binary interval tree (BIT) and a back-end data structure called a collection of preﬁx trees (CPT). For any destination address d, deﬁne the matching basic interval to be a basic interval with the property that ri ≤ d ≤ ri+1 (note that some ds have two matching basic intervals). The BIT is a binary search tree that is used to search for a matching basic interval for d. The BIT comprises internal and external nodes and there is one internal node for each ri . Since the BIT has q internal nodes, it has q + 1 external nodes. The ﬁrst and last of these, in inorder, have no signiﬁcance. The remaining q − 1 external nodes, in inorder, represent the q − 1 basic intervals of the given preﬁx set. Figure 48.6(a) gives a possible (we say possible because, any red-black binary search tree organization for the internal nodes will suﬃce) BIT for our ﬁve-preﬁx example of Figure 48.2(a). Internal nodes are shown as rectangles while circles denote external nodes. Every external node has three pointers: startPointer, ﬁnishPointer, and basicIntervalPointer. For an external node that represents the basic interval [ri , ri+1 ], startPointer (ﬁnishPointer) points to the header node of the preﬁx tree (in the back-end structure) for the preﬁx (if any) whose range start and ﬁnish points are ri (ri+1 ). Note that only preﬁxes whose length is W can have this property. basicIntervalPointer points to a preﬁx node in a preﬁx tree of the back-end structure. In Figure 48.6(a), the labels in the external (circular) nodes identify the represented basic interval. The external node with r1 in it, for example, has a basicIntervalPointer to the rectangular node labeled r1 in the preﬁx tree of Figure 48.6(b).

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-15

For each preﬁx and basic interval, x, deﬁne next(x) to be the smallest range preﬁx (i.e., the longest preﬁx) whose range includes the range of x. For the example of Figure 48.2(a), the next() values for the basic intervals r1 through r7 are, respectively, P1, P2, P1, P3, P4, P1, and P1. Notice that the next value for the range [ri , ri+1 ] is the same as the “>” value for ri in Figure 48.2(b), 1 ≤ i < q. The next() values for the nontrivial preﬁxes P1 through P4 of Figure 48.2(a) are, respectively, “-”, P1, P1, and P3. The back-end structure, which is a collection of preﬁx trees (CPT), has one preﬁx tree for each of the preﬁxes in the router table. Each preﬁx tree is a red-black tree. The preﬁx tree for preﬁx P comprises a header node plus one node, called a preﬁx node, for every nontrivial preﬁx or basic interval x such that next(x) = P . The header node identiﬁes the preﬁx P for which this is the preﬁx tree. The preﬁx trees for each of the ﬁve preﬁxes of Figure 48.2(a) are shown in Figures 48.6(b)-(f). Notice that preﬁx trees do not have external nodes and that the preﬁx nodes of a preﬁx tree store the start point of the range or preﬁx represented by that preﬁx node. In the ﬁgures, the start points of the basic intervals and preﬁxes are shown inside the preﬁx nodes while the basic interval or preﬁx name is shown outside the node. The search for LM P (d) begins with a search of the BIT for the matching basic interval for d. Suppose that external node Q of the BIT represents this matching basic interval. When the destination address equals the left (right) end-point of the matching basic interval and startPointer (ﬁnishPointer) is not null, LM P (d) is pointed to by startPointer (ﬁnishPointer). Otherwise, the back-end CPT is searched for LM P (d). The search of the back-end structure begins at the node Q.basicIntervalP ointer. By following parent pointers from Q.basicIntervalP ointer, we reach the header node of the preﬁx tree that corresponds to LM P (d). When a CRBT is used, LM P (d) may be found in O(log n) time. Inserts and deletes also take O(log n) time when a CRBT is used. In [27], Sahni and Kim propose an alternative BIT structure (ABIT) that has internal nodes only. Although the ABIT structure increases the memory requirements of the router table, the time to search, insert, and delete is reduced by a constant factor [27]. Suri et al. [31] have proposed a B-tree data structure for dynamic router tables. Using their structure, we may ﬁnd the longest matching preﬁx in O(log n) time. However, inserts/deletes take O(W log n) time. The number of cache misses is O(log n) for each operation. When W bits ﬁt in O(1) words (as is the case for IPv4 and IPv6 preﬁxes) logical operations on W -bit vectors can be done in O(1) time each. In this case, the scheme of [31] takes O(log W ∗ log n) time for an insert and O(W + log n) = O(W ) time for a delete. An alternative B-tree router-table design has been proposed by Lu and Sahni [21]. Although the asymptotic complexity of each of the router-table operations is the same using either B-tree router-table design, the design of Lu and Sahni [21] has fewer cache misses for inserts and deletes; the number of cache misses when searching for lmp(d) is the same using either design. Consequently, inserts and deletes are faster when the design of Lu and Sahni [21] is used. Several researchers ([6, 11, 14, 27], for example), have investigated router table data structures that account for bias in access patterns. Gupta, Prabhakar, and Boyd [14], for example, propose the use of ranges. They assume that access frequencies for the ranges are known, and they construct a bounded-height binary search tree of ranges. This binary search tree accounts for the known range access frequencies to obtain near-optimal IP lookup. Although the scheme of [14] performs IP lookup in near-optimal time, changes in the access frequencies, or the insertion or removal of a preﬁx require us to reconstruct the data structure, a task that takes O(n log n) time. Ergun et al. [11] use ranges to develop a biased skip list structure that performs longest preﬁx-matching in O(log n) expected time. Their scheme is designed to give good expected

© 2005 by Chapman & Hall/CRC

48-16

Handbook of Data Structures and Applications

performance for bursty∗∗ access patterns”. The biased skip list scheme of Ergun et al. [11] permits inserts and deletes in O(log n) time only in the severely restricted and impractical situation when all preﬁxes in the router table are of the same length. For the more general, and practical, case when the router table comprises preﬁxes of diﬀerent length, their scheme takes O(n) expected time for each insert and delete. Sahni and Kim [27] extend the biased skip lists of Ergun et al. [11] to obtain a biased skip lists structure in which longest preﬁxmatching as well as inserts and deletes take O(log n) expected time. They also propose a splay tree scheme (see Chapter 12) for bursty access patterns. In this scheme, longest preﬁx-matching, insert and delete have an O(log n) amortized complexity.

48.2.6

Priority Search Trees

A priority-search tree (PST) [22] (see Chapter 18) is a data structure that is used to represent a set of tuples of the form (key1, key2, data), where key1 ≥ 0, key2 ≥ 0, and no two tuples have the same key1 value. The data structure is simultaneously a min-tree on key2 (i.e., the key2 value in each node of the tree is ≤ the key2 value in each descendant node) and a search tree on key1. There are two common PST representations [22]: 1. In a radix priority-search tree (RPST), the underlying tree is a binary radix tree on key1. 2. In a red-black priority-search tree (RBPST), the underlying tree is a redblack tree. McCreight [22] has suggested a PST representation of a collection of ranges with distinct ﬁnish points. This representation uses the following mapping of a range r into a PST tuple: (key1, key2, data) = (f inish(r), start(r), data)

(48.9)

where data is any information (e.g., next hop) associated with the range. Each range r is, therefore mapped to a point map1(r) = (x, y) = (key1, key2) = (f inish(r), start(r)) in 2-dimensional space. Let ranges(d) be the set of ranges that match d. McCreight [22] has observed that when the mapping of Equation 48.9 is used to obtain a point set P = map1(R) from a range set R, then ranges(d) is given by the points that lie in the rectangle (including points on the boundary) deﬁned by xlef t = d, xright = ∞, ytop = d, and ybottom = 0. These points are obtained using the method enumerateRectangle(xlef t, xright , ytop ) = enumerateRectangle(d, ∞, d) of a PST (ybottom is implicit and is always 0). When an RPST is used to represent the point set P , the complexity of enumerateRectangle(xlef t, xright , ytop ) is O(log maxX + s), where maxX is the largest x value in P and s is the number of points in the query rectangle. When the point set is represented as an RBPST, this complexity becomes O(log n + s), where n = |P |. A point (x, y) (and hence a range [y, x]) may be inserted into or deleted from an RPST (RBPST) in O(log maxX) (O(log n)) time [22].

∗∗ In

a bursty access pattern the number of diﬀerent destination addresses in any subsequence of q packets is << q. That is, if the destination of the current packet is d, there is a high probability that d is also the destination for one or more of the next few packets. The fact that Internet packets tend to be bursty has been noted in [7, 18], for example.

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-17

Data Structure Linear List End-point Array Sets of Equal-Length Preﬁxes 1-bit tries s-bit Tries CRBT ACRBT BSLPT CST PST

TABLE 48.1

Search O(n) O(log n) O(α + log W ) expected O(W ) O(W/s) O(log n) O(log n) O(log n) expected O(log n) amortized O(log n)

Update O(n) O(n)√ O(α α nW log W ) expected O(W ) O(log n) O(log n) O(log n) expected O(log n) amortized O(log n)

Time complexity of data structures for longest matching-preﬁx.

Let R be a set of preﬁx ranges. For simplicity, assume that R includes the range that corresponds to the preﬁx *. With this assumption, LM P (d) is deﬁned for every d. One may verify that LM P (d) is the preﬁx whose range is [maxStart(ranges(d)), minF inish(ranges(d))]. Lu and Sahni [19] show that R must contain such range. To ﬁnd this range easily, we ﬁrst transform P = map1(R) into a point set transf orm1(P ) so that no two points of transf orm1(P ) have the same x-value. Then, we represent transf orm1(P ) as a PST. For every (x, y) ∈ P , deﬁne transf orm1(x, y) = (x , y ) = (2W x − y + 2W − 1, y). Then, transf orm1(P ) = {transf orm1(x, y)|(x, y) ∈ P }. We see that 0 ≤ x < 22W for every (x , y ) ∈ transf orm1(P ) and that no two points in transf orm1(P ) have the same x -value. Let P ST 1(P ) be the PST for transf orm1(P ). The operation enumerateRectangle(2W d − d + 2W − 1, ∞, d) performed on P ST 1 yields ranges(d). To ﬁnd LM P (d), we employ the minXinRectangle(xlef t, xright , ytop ) operation, which determines the point in the deﬁned rectangle that has the least x-value. It is easy to see that minXinRectangle(2W d − d + 2W − 1, ∞, d) performed on P ST 1 yields LM P (d). To insert the preﬁx whose range in [u, v], we insert transf orm1(map1([u, v])) into P ST 1. In case this preﬁx is already in P ST 1, we simply update the next-hop information for this preﬁx. To delete the preﬁx whose range is [u, v], we delete transf orm1(map1([u, v])) from P ST 1. When deleting a preﬁx, we must take care not to delete the preﬁx *. Requests to delete this preﬁx should simply result in setting the next-hop associated with this preﬁx to ∅. Since, minXinRectangle, insert, and delete each take O(W ) (O(log n)) time when P ST 1 is an RPST (RBPST), P ST 1 provides a router-table representation in which longest-preﬁx matching, preﬁx insertion, and preﬁx deletion can be done in O(W ) time each when an RPST is used and in O(log n) time each when an RBPST is used. Tables 48.1 and 48.2 summarize the performance characteristics of various data structures for the longest matching-preﬁx problem.

© 2005 by Chapman & Hall/CRC

48-18

Handbook of Data Structures and Applications Data Structure Linear List End-point Array Sets of Equal-Length Preﬁxes 1-bit tries s-bit Tries CRBT ACRBT BSLPT CST PST

TABLE 48.2

48.3

Memory Usage O(n) O(n) O(n log W ) O(nW ) O(2s nW/s) O(n) O(n) O(n) O(n) O(n)

Memory complexity of data structures for longest matching-preﬁx.

Highest-Priority Matching

The trie data structure may be used to represent a dynamic preﬁx-router-table in which the highest-priority tie-breaker is in use. Using such a structure, each of the dynamic routertable operations may be performed in O(W ) time. Lu and Sahni [20] have developed the binary tree on binary tree (BOB) data structure for highest-priority dynamic router-tables. Using BOB, a lookup takes O(log2 n) time and cache misses; a new rule may be inserted and an old one deleted in O(log n) time and cache misses. Although BOB handles ﬁlters that are non-intersecting ranges, specialized versions of BOB have been proposed for preﬁx ﬁlters. Using the data structure PBOB (preﬁx BOB), a lookup, rule insertion and deletion each take O(W ) time and cache misses. The data structure LMPBOB (longest matching-preﬁx BOB) is proposed in [20] for dynamic preﬁx-router-tables that use the longest matchingpreﬁx rule. Using LMPBOB, the longest matching-preﬁx may be found in O(W ) time and O(log n) cache misses; rule insertion and deletion each take O(log n) time and cache misses. On practical rule tables, BOB and PBOB perform each of the three dynamic-table operations in O(log n) time and with O(log n) cache misses. Other data structures for maximum-priority matching are developed in [12, 13].

48.3.1

The Data Structure BOB

The data structure binary tree on binary tree (BOB) comprises a single balanced binary search tree at the top level. This top-level balanced binary search tree is called the point search tree (PTST). For an n-rule NHRT, the PTST has at most 2n nodes (we call this the PTST size constraint). With each node z of the PTST, we associate a point, point(z). The PTST is a standard red-black binary search tree (actually, any binary search tree structure that supports eﬃcient search, insert, and delete may be used) on the point(z) values of its node set [15]. That is, for every node z of the PTST, nodes in the left subtree of z have smaller point values than point(z), and nodes in the right subtree of z have larger point values than point(z). Let R be the set of nonintersecting ranges. Each range of R is stored in exactly one of the nodes of the PTST. More speciﬁcally, the root of the PTST stores all ranges r ∈ R such that start(r) ≤ point(root) ≤ f inish(r); all ranges r ∈ R such that f inish(r) < point(root) are stored in the left subtree of the root; all ranges r ∈ R such that point(root) < start(r) (i.e., the remaining ranges of R) are stored in the right subtree of the root. The ranges allocated to the left and right subtrees of the root are allocated to nodes in these subtrees using the just stated range allocation rule recursively. For the range allocation rule to successfully allocate all r ∈ R to exactly one node of the PTST, the PTST must have at least one node z for which start(r) ≤ point(z) ≤ f inish(r). Figure 48.7 gives an example set of nonintersecting ranges and a possible PTST for this set

© 2005 by Chapman & Hall/CRC

IP Router Tables range priority [2, 100] 4 [2, 4] 33 [2, 3] 34 [8, 68] 10 [8, 50] 9 [10, 50] 20 [10, 35] 3 [15, 33] 5 [16, 30] 30 [54, 66] 18 [60, 65] 7 [69, 72] 10 [80, 80] 12 (a)

48-19

([8, 68], 10) ([8, 50], 9) ([10, 50], 20) ([10, 35], 3) ([15, 33], 5) ([16, 30], 30)

70 30 2

80 65

([2, 4], 33) ([2, 3], 34)

([2, 100], 4) ([69, 72],10) ([80, 80], 12)

([54, 66], 18) ([60, 65], 7) (b)

FIGURE 48.7: (a) A nonintersecting range set and (b) A possible PTST. of ranges (we say possible, because we haven’t speciﬁed how to select the point(z) values and even with speciﬁed point(z) values, the corresponding red-black tree isn’t unique). The number inside each node is point(z), and outside each node, we give ranges(z). Let ranges(z) be the subset of ranges of R allocated to node z of the PTST†† . Since the PTST may have as many as 2n nodes and since each range of R is in exactly one of the sets ranges(z), some of the ranges(z) sets may be empty. The ranges in ranges(z) may be ordered using the < relation for non-intersecting ranges‡‡ . Using this < relation, we put the ranges of ranges(z) into a red-black tree (any balanced binary search tree structure that supports eﬃcient search, insert, delete, join, and split may be used) called the range search-tree or RST (z). Each node x of RST (z) stores exactly one range of ranges(z). We refer to this range as range(x). Every node y in the left (right) subtree of node x of RST (z) has range(y) < range(x) (range(y) > range(x)). In addition, each node x stores the quantity mp(x), which is the maximum of the priorities of the ranges associated with the nodes in the subtree rooted at x. mp(x) may be deﬁned recursively as below. p(x) if x is leaf mp(x) = max {mp(lef tChild(x)), mp(rightChild(x)), p(x)} otherwise where p(x) = priority(range(x)). Figure 48.8 gives a possible RST structure for ranges(30) of Figure 48.7(b). [Lu and Sahni [20]] Let z be a node in a PTST and let x be a node in RST (z). Let st(x) = start(range(x)) and f n(x) = f inish(range(x)).

LEMMA 48.1

†† We have overloaded the function ranges. When u is a node, ranges(u) refers to the ranges stored in node u of a PTST; when u is a destination address, ranges(u) refers to the ranges that match u. ‡‡ Let r and s be two ranges. r < s ⇔ start(r) < start(s)∨(start(r) = start(s)∧f inish(r) > f inish(s)).

© 2005 by Chapman & Hall/CRC

48-20

Handbook of Data Structures and Applications

[10, 35], 3, 30 [8, 50], 9, 20

[8, 68], 10, 10

[10, 50], 20, 20

[15, 33], 5, 30

[16, 30], 30, 30

FIGURE 48.8: An example RST for ranges(30) of Figure 48.7(b). Each node shows (range(x), p(x), mp(x)).

1. For every node y in the right subtree of x, st(y) ≥ st(x) and f n(y) ≤ f n(x). 2. For every node y in the left subtree of x, st(y) ≤ st(x) and f n(y) ≥ f n(x). Both BOB and BOT (the binary tree on trie structure of Gupta and McKeown [13]) use a range allocation rule identical to that used in an interval tree [5] (See Chapter 18). While BOT may be used with any set of ranges, BOB applies only to a set of non-intersecting ranges. However, BOB reduces the search complexity of BOT from O(W log n) to O(log2 n) and reduces the update complexity from O(W ) to O(log n).

48.3.2

Search for the Highest-Priority Matching Range

The highest-priority range that matches the destination address d may be found by following a path from the root of the PTST toward a leaf of the PTST. Figure 48.9 gives the algorithm. For simplicity, this algorithm ﬁnds hp = priority(hpr(d)) rather than hpr(d). The algorithm is easily modiﬁed to return hpr(d) instead. We begin by initializing hp = −1 and z is set to the root of the PTST. This initialization assumes that all priorities are ≥ 0. The variable z is used to follow a path from the root toward a leaf. When d > point(z), d may be matched only by ranges in RST (z) and those in the right subtree of z. The method RST(z)->hpRight(d,hp) (Figure 48.10) updates hp to reﬂect any matching ranges in RST (z). This method makes use of the fact that d > point(z). Consider a node x of RST (z). If d > f n(x), then d is to the right (i.e., d > f inish(range(x))) of range(x) and also to the right of all ranges in the right subtree of x. Hence, we may proceed to examine the ranges in the left subtree of x. When d ≤ f n(x), range(x) as well as all ranges in the left subtree of x match d. Additional matching ranges may be present in the right subtree of x. hpLef t(d, hp) is the analogous method for the case when d < point(z). Complexity The complexity of the invocation RST(z)->hpRight(d,hp) is readily seen to be O(height(RST (z)) = O(log n). Consequently, the complexity of hp(d) is O(log2 n). To determine hpr(d) we need only add code to the methods hp(d), hpRight(d, hp), and hpLef t(d, hp) so as to keep track of the range whose priority is the current value of hp. So, hpr(d) may be found in O(log 2 n) time also. The details of the insert and delete operation as well of the BOB variants PBOB and LMPBOB may be found in [20].

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-21

Algorithm hp(d) { // return the priority of hpr(d) // easily extended to return hpr(d) hp = -1; // assuming 0 is the smallest priority value z = root; // root of PTST while (z != null) { if (d > point(z)) { RST(z)->hpRight(d, hp); z = rightChild(z); } else if (d < point(z)) { RST(z)->hpLeft(d, hp); z = leftChild(z); } else // d == point(z) return max{hp, mp(RST(z)->root)}; } return hp; } FIGURE 48.9: Algorithm to ﬁnd priority(hpr(d)). Algorithm hpRight(d, hp) { // update hp to account for any ranges in RST(z) that match d // d > point(z) x = root; // root of RST(z) while (x != null) if (d > fn(x)) x = leftChild(x); else { hp = max{hp, p(x), mp(leftChild(x))}; x = rightChild(x); } } FIGURE 48.10: Algorithm hpRight(d, hp).

48.4

Most-Speciﬁc-Range Matching

Let msr(d) be the most-speciﬁc range that matches the destination address d. For static tables, we may simply represent the n ranges by the up to 2n−1 basic intervals they induce. For each basic interval, we determine the most-speciﬁc range that matches all points in the interval. These up to 2n − 1 basic intervals may then be represented as up to 4n − 2 preﬁxes [12] with the property that msr(d) is uniquely determined by LM P (d). Now, we may use any of the earlier discussed data structures for static tables in which the ﬁlters are preﬁxes. In this section, therefore, we discuss only those data structures that are suitable for dynamic tables.

© 2005 by Chapman & Hall/CRC

48-22

48.4.1

Handbook of Data Structures and Applications

Nonintersecting Ranges

Let R be a set of nonintersecting ranges. For simplicity, assume that R includes the range z that matches all destination addresses (z = [0, 232 − 1] in the case of IPv4). With this assumption, msr(d) is deﬁned for every d. Similar to the case of preﬁxes, for nonintersecting ranges, msr(d) is the range [maxStart(ranges(d)), minF inish(ranges(d))] (Lu and Sahni [19] show that R must contain such a range). We may use P ST 1(transf orm1(map1(R))) to ﬁnd msr(d) using the same method described in Section 48.2.6 to ﬁnd LM P (d). Insertion of a range r is to be permitted only if r does not intersect any of the ranges of R. Once we have veriﬁed this, we can insert r into P ST 1 as described in Section 48.2.6. Range intersection may be veriﬁed by noting that there are two cases for range intersection. When inserting r = [u, v], we need to determine if ∃s = [x, y] ∈ R[u < x ≤ v < y ∨ x < u ≤ y < v]. We see that ∃s ∈ R[x < u ≤ y < v] iﬀ map1(R) has at least one point in the rectangle deﬁned by xlef t = u, xright = v − 1, and ytop = u − 1 (recall that ybottom = 0 by default). Hence, ∃s ∈ R[x < u ≤ y < v] iﬀ minXinRectangle(2W u−(u−1)+2W −1, 2W (v−1)+2W −1, u−1) exists in PST1. To verify ∃s ∈ R[u < x ≤ v < y], map the ranges of R into 2-dimensional points using the mapping, map2(r) = (start(r), 2W − 1 − f inish(r)). Call the resulting set of mapped points map2(R). We see that ∃s ∈ R[u < x ≤ v < y] iﬀ map2(R) has at least one point in the rectangle deﬁned by xlef t = u+1, xright = v, and ytop = (2W −1)−v−1. To verify this, we maintain a second PST, P ST 2 of points in transf orm2(map2(R)), where transf orm2(x, y) = (2W x + y, y) Hence, ∃s ∈ R[u < x ≤ v < y] iﬀ minXinRectangle(2W (u + 1), 2W v + (2W − 1) − v − 1, (2W − 1) − v − 1) exists. To delete a range r, we must delete r from both P ST 1 and P ST 2. Deletion of a range from a PST is similar to deletion of a preﬁx as discussed in Section 48.2.6. The complexity of the operations to ﬁnd msr(d), insert a range, and delete a range are the same as that for these operations for the case when R is a set of ranges that correspond to preﬁxes.

48.4.2

Conﬂict-Free Ranges

The range set R has a conﬂict iﬀ there exists a destination address d for which ranges(d) = ∅ ∧ msr(d) = ∅. R is conﬂict free iﬀ it has no conﬂict. Notice that sets of preﬁx ranges and sets of nonintersecting ranges are conﬂict free. The two-PST data structure of Section 48.4.1 may be extended to the general case when R is an arbitrary conﬂict-free range set. Once again, we assume that R includes the range z that matches all destination addresses. P ST 1 and P ST 2 are deﬁned for the range set R as in Sections 48.2.6 and 48.4.1. Lu and Sahni [19] have shown that when R is conﬂict free, msr(d) is the range [maxStart(ranges(d)), minF inish(ranges(d))] Hence, msr(d) may be obtained by performing the operation minXinRectangle(2W d − d + 2W − 1, ∞, d) on PST1. Insertion and deletion are complicated by the need to verify that the addition or deletion of a range to/from a conﬂict-free range set leaves behind a conﬂict-free range set. To perform this check eﬃciently, Lu and Sahni [19] augment P ST 1 and P ST with a representation for the chains in the normalized range-set, norm(R), that corresponds to

© 2005 by Chapman & Hall/CRC

IP Router Tables

48-23

R. This requires the use of several red-black trees. The reader is referred to [19] for a description of this augmentation. The overall complexity of the augmented data structure of [19] is O(log n) for each operation when RBP ST s are used for P ST 1 and P ST 2. When RP ST s are used, the search complexity is O(W ) and the insert and delete complexity is O(W + log n) = O(W ).

Acknowledgment This work was supported, in part, by the National Science Foundation under grant CCR9912395.

References [1] A. Andersson and S. Nillson, Improved behavior of tries by adaptive branching, Information Processing Letters, 46, 295-300, 1993. [2] A. Basu and G. Narlikar, Fast incremental updates for pipelined forwarding engines, IEEE INFOCOM, 2003. [3] F. Baboescu, S. Singh, and G. Varghese, Packet classiﬁcation for core routers: Is there an alternative to CAMs?, IEEE INFOCOM, 2003. [4] M.Berg, M.Kreveld, and J.Snoeyink, Two- and three-dimensional point location in rectangular subdivisions, Journal of Algorithms, 18(2), 256-277, 1995. [5] M. deBerg, M. vanKreveld, and M. Overmars, Computational geometry: Algorithms and applications, Second Edition, Springer Verlag, 1997. [6] G. Cheung and S. McCanne, Optimal routing table design for IP address lookups under memory constraints, IEEE INFOCOM, 1999. [7] K. Claﬀy, H. Braun, and G, Polyzos, A parameterizable methodology for internet traﬃc ﬂow proﬁling, IEEE Journal of Selected Areas in Communications, 1995. [8] M. Degermark, A. Brodnik, S. Carlsson, and S. Pink, Small forwarding tables for fast routing lookups, ACM SIGCOMM, 3-14, 1997. [9] W. Doeringer, G. Karjoth, and M. Nassehi, Routing on longest-matching preﬁxes, IEEE/ACM Transactions on Networking, 4, 1, 86-97, 1996. [10] P.V.Emde Boas, R. Kass, and E.Zijlstra, Design and implementation of an eﬃcient priority queue, Mathematical Systems Theory, 10, 99-127, 1977. [11] F. Ergun, S. Mittra, S. Sahinalp, J. Sharp, and R. Sinha, A dynamic lookup scheme for bursty access patterns, IEEE INFOCOM, 2001. [12] A. Feldman and S. Muthukrishnan, Tradeoﬀs for packet classiﬁcation, IEEE INFOCOM, 2000. [13] P. Gupta and N. McKeown, Dynamic algorithms with worst-case performance for packet classiﬁcation, IFIP Networking, 2000. [14] P. Gupta, B. Prabhakar, and S. Boyd, Near-optimal routing lookups with bounded worst case performance, IEEE INFOCOM, 2000. [15] E. Horowitz, S. Sahni, and D. Mehta, Fundamentals of data structures in C++, W.H. Freeman, NY, 1995, 653 pages. [16] K. Kim and S. Sahni, IP lookup by binary search on length. Journal of Interconnection Networks, to appear. [17] B. Lampson, V. Srinivasan, and G. Varghese, IP lookup using multi-way and multicolumn search, IEEE INFOCOM, 1998. [18] S. Lin and N. McKeown, A simulation study of IP switching, IEEE INFOCOM, 2000. [19] H. Lu and S. Sahni, O(log n) dynamic router-tables for preﬁxes and ranges. Submitted.

© 2005 by Chapman & Hall/CRC

48-24

Handbook of Data Structures and Applications

[20] H. Lu and S. Sahni, Dynamic IP router-tables using highest-priority matching. Submitted. [21] H. Lu and S. Sahni, A B-tree dynamic router-table design. Submitted. [22] E. McCreight, Priority search trees, SIAM Jr. on Computing, 14, 1, 257-276, 1985. [23] S. Nilsson and G. Karlsson, Fast address look-up for Internet routers, IEEE Broadband Communications, 1998. [24] S. Sahni and K. Kim, Eﬃcient construction of ﬁxed-stride multibit tries for IP lookup,

[25]

[26] [27] [28] [29] [30] [31] [32] [33] [34]

Proceedings 8th IEEE Workshop on Future Trends of Distributed Computing Systems, 2001. S. Sahni and K. Kim, Eﬃcient construction of variable-stride multibit tries for IP lookup, Proceedings IEEE Symposium on Applications and the Internet (SAINT), 220-227, 2002. S. Sahni and K. Kim, O(log n) dynamic packet routing, IEEE Symposium on Computers and Communications, 443-448, 2002. S. Sahni and K. Kim, Eﬃcient dynamic lookup for bursty access patterns, submitted. D. Shah and P. Gupta, Fast updating algorithms for TCAMs, IEEE Micro, 21, 1, 36-47, 2002. V. Srinivasan, Fast and eﬃcient Internet lookups, CS Ph.D Dissertation, Washington University, Aug., 1999. V. Srinivasan and G. Varghese, Faster IP lookups using controlled preﬁx expansion, ACM Transactions on Computer Systems, Feb:1-40, 1999. S. Suri, G. Varghese, and P. Warkhede, Multiway range trees: Scalable IP lookup with fast updates, GLOBECOM, 2001. M. Waldvogel, G. Varghese, J. Turner, and B. Plattner, Scalable high speed IP routing lookups, ACM SIGCOMM, 25-36, 1997. Dan E. Willard, Log-logarithmic worst-case range queries are possible in space θ(N ), Information Processing Letters, 17, 81-84, 1983. F. Zane, G. Narlikar, and A. Basu, CoolCAMs: Power-eﬃcient TCAMs for forwarding engines, IEEE INFOCOM, 2003.

© 2005 by Chapman & Hall/CRC

49 Multi-Dimensional Packet Classiﬁcation 49.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49-1

Problem Statement

49.2 49.3

49.1

49-4 49-4

Background • Taxonomy of Classiﬁcation Algorithms • Basic Data Structures • Geometric Algorithms • Heuristics • Hardware-Based Algorithms

Pankaj Gupta Cypress Semiconductor

Performance Metrics for Classiﬁcation Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Classiﬁcation Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . .

49.4

Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-19

Introduction

Chapter 48 discussed algorithms for 1-d packet classiﬁcation. In this chapter we consider multi-dimensional classiﬁcation in detail. First we discuss the motivation and then the algorithms for multi-dimensional classiﬁcation. As we will see, packet classiﬁcation on multiple ﬁelds is in general a diﬃcult problem. Hence, researchers have proposed a variety of algorithms which, broadly speaking, can be categorized as “basic search algorithms,” geometric algorithms, heuristic algorithms, or hardware-speciﬁc search algorithms. In this chapter, we will describe algorithms that are representative of each category, and discuss which type of algorithm might be suitable for diﬀerent applications. Until recently, Internet routers provided only “best-eﬀort” service, servicing packets in a ﬁrst-come-ﬁrst-served manner. Routers are now called upon to provide diﬀerent qualities of service to diﬀerent applications which means routers need new mechanisms such as admission control, resource reservation, per-ﬂow queueing, and fair scheduling. All of these mechanisms require the router to distinguish packets belonging to diﬀerent ﬂows. Flows are speciﬁed by rules applied to incoming packets. We call a collection of rules a classiﬁer. Each rule speciﬁes a ﬂow that a packet may belong to based on some criteria applied to the packet header, as shown in Figure 49.1. To illustrate the variety of classiﬁers, consider some examples of how packet classiﬁcation can be used by an ISP to provide diﬀerent services. Figure 49.2 shows ISP1 connected to three diﬀerent sites: enterprise networks E1 and E2 and a Network Access Point∗ (NAP), which is in turn connected to

∗ A network access point is a network site which acts as an exchange point for Internet traﬃc. ISPs connect to the NAP to exchange traﬃc with other ISPs.

49-1

© 2005 by Chapman & Hall/CRC

49-2

Handbook of Data Structures and Applications

PAYLOAD

L4-SP 16b

L4-DP 16b

L4-PROT L3-SA L3-DA L3-PROT L2-SA 8b 32b 32b 8b 48b

Transport layer header L2 = Layer 2 (e.g., Ethernet) L3 = Layer 3(e.g., IP) L4 = Layer 4(e.g., TCP)

Network layer header

L2- DA 48b

Link layer header

DA =Destination Address SA = Source Address PROT = Protocol SP = Source Port DP =Destination Port

FIGURE 49.1: This ﬁgure shows some of the header ﬁelds (and their widths) that might be used for classifying the packet. Although not shown in this ﬁgure, higher layer (e.g., application-level) headers may also be used.

Service Packet Filtering Policy Routing Accounting & Billing Traﬃc Rate Limiting Traﬃc Shaping

TABLE 49.1

Examples of services enabled by packet classiﬁcation

Flow Email and from ISP2 From ISP2 From ISP3 and going to E2 All other packets

TABLE 49.2

Example Deny all traﬃc from ISP3 (on interface X) destined to E2 . Send all voice-over-IP traﬃc arriving from E1 (on interface Y) and destined to E2 via a separate ATM network. Treat all video traﬃc to E1 (via interface Y) as highest priority and perform accounting for the traﬃc sent this way. Ensure that ISP2 does not inject more than 10Mbps of email traﬃc and 50Mbps of total traﬃc on interface X. Ensure that no more than 50Mbps of web traﬃc is injected into ISP2 on interface X.

Relevant Packet Fields: Source Link-layer Address, Source Transport port number Source Link-layer Address Source Link-layer Address, Destination Network-Layer Address –

Flows that an incoming packet must be classiﬁed into by the router at interface X in Figure 49.2.

ISP2 and ISP3 . ISP1 provides a number of diﬀerent services to its customers, as shown in Table 49.1. Table 49.2 shows the ﬂows that an incoming packet must be classiﬁed into by the router at interface X. Note that the ﬂows speciﬁed may or may not be mutually exclusive. For example, the ﬁrst and second ﬂows in Table 49.2 overlap. This is common in practice, and when no explicit priorities are speciﬁed, we follow the convention that rules closer to the top of the list take priority (referred to as the “First matching rule in table” tie-breaker rule in Chapter 48).

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

49-3

E1 Y

ISP1 ISP2

X Z

NAP

E2 Router

ISP3

FIGURE 49.2: Example network of an ISP (ISP1 ) connected to two enterprise networks (E1 and E2 ) and to two other ISP networks across a network access point (NAP).

Rule R1 R2 R5 R6

Network-layer Destination (address/mask) 152.163.190.69/ 255.255.255.255 152.168.3.0/ 255.255.255.0 152.163.198.4/ 255.255.255.255 0.0.0.0/0.0.0.0

Network-layer Source (address/mask) 152.163.80.11/ 255.255.255.255 152.163.200.157/ 255.255.255.255 152.163.160.0/ 255.255.252.0 0.0.0.0/0.0.0.0

TABLE 49.3

49.1.1

Transport-layer Destination

Transport-layer Protocol

Action

*

*

Deny

eq www

udp

Deny

gt 1023

tcp

Permit

*

*

Permit

An example 4-dimensional real-life classiﬁer.

Problem Statement

Each rule of a classiﬁer has d components. R[i] is the ith component of rule R, and is a regular expression on the ith ﬁeld of the packet header. A packet P is said to match rule R, if ∀i, the ith ﬁeld of the header of P satisﬁes the regular expression R[i]. In practice, a rule component is not a general regular expression but is often limited by syntax to a simple address/mask or operator/number(s) speciﬁcation. In an address/mask speciﬁcation, a 0 (respectively 1) at bit position x in the mask denotes that the corresponding bit in the address is a don’t care (respectively signiﬁcant) bit. Examples of operator/number(s) speciﬁcations are eq 1232 and range 34-9339. Note that a preﬁx can be speciﬁed as an address/mask pair where the mask is contiguous — i.e., all bits with value 1 appear to the left of bits with value 0 in the mask. It can also be speciﬁed as a range of width equal to 2t where t = 32 − pref ixlength. Most commonly occurring speciﬁcations can be represented by ranges. An example real-life classiﬁer in four dimensions is shown in Table 49.3. By convention, the ﬁrst rule R1 is of highest priority and rule R7 is of lowest priority. Some example classiﬁcation results are shown in Table 49.4 Longest preﬁx matching for routing lookups is a special-case of one-dimensional packet classiﬁcation. All packets destined to the set of addresses described by a common preﬁx may be considered to be part of the same ﬂow. The address of the next hop where the

© 2005 by Chapman & Hall/CRC

49-4

Handbook of Data Structures and Applications

Packet Header P1 P2 P3

Network-layer Destination 152.163.190.69 152.168.3.21 152.163.198.4

TABLE 49.4

Network-layer Source 152.163.80.11 152.163.200.157 152.163.160.10

Transport-layer Destination www www 1024

Transport-layer Protocol tcp udp tcp

Best matching rule, Action R1, Deny R2, Deny R5, Permit

Example classiﬁcation results from the real-life classiﬁer of Table 49.3.

packet should be forwarded to is the associated action. The length of the preﬁx deﬁnes the priority of the rule.

49.2

Performance Metrics for Classiﬁcation Algorithms

1. Search speed — Faster links require faster classiﬁcation. For example, links running at 10Gbps can bring 31.25 million packets per second (assuming minimum sized 40 byte TCP/IP packets). 2. Low storage requirements — Small storage requirements enable the use of fast memory technologies like SRAM (Static Random Access Memory). SRAM can be used as an on-chip cache by a software algorithm and as on-chip SRAM for a hardware algorithm. 3. Ability to handle large real-life classiﬁers. 4. Fast updates — As the classiﬁer changes, the data structure needs to be updated. We can categorize data structures into those which can add or delete entries incrementally, and those which need to be reconstructed from scratch each time the classiﬁer changes. When the data structure is reconstructed from scratch, we call it “pre-processing”. The update rate diﬀers among diﬀerent applications: a very low update rate may be suﬃcient in ﬁrewalls where entries are added manually or infrequently, whereas a router with per-ﬂow queues may require very frequent updates. 5. Scalability in the number of header ﬁelds used for classiﬁcation. 6. Flexibility in speciﬁcation — A classiﬁcation algorithm should support general rules, including preﬁxes, operators (range, less than, greater than, equal to, etc.) and wildcards. In some applications, non-contiguous masks may be required.

49.3 49.3.1

Classiﬁcation Algorithms Background

For the next few sections, we will use the example classiﬁer in Table 49.5 repeatedly. The classiﬁer has six rules in two ﬁelds labeled F 1 and F 2; each speciﬁcation is a preﬁx of maximum length 3 bits. We will refer to the classiﬁer as C = {Rj } and each rule Rj as a 2-tuple: < Rj1 , Rj2 >.

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

49-5 Rule R1 R2 R3 R4 R5 R6

TABLE 49.5

F1 00∗ 0∗ 1∗ 00∗ 0∗ ∗

F2 00∗ 01∗ 0∗ 0∗ 1∗ 1∗

Example 2-dimensional classiﬁer.

111

P R5

110 101

R6

100 011

R2 R3

010 001

R1

000 000

001

010

100 110 101 111 011

FIGURE 49.3: Geometric representation of the classiﬁer in Table 49.5. A packet represents a point, for instance P(011,110) in two-dimensional space. Note that R4 is hidden by R1 and R2. Bounds from Computational Geometry

There is a simple geometric interpretation of packet classiﬁcation. While a preﬁx represents a contiguous interval on the number line, a two-dimensional rule represents a rectangle in two-dimensional euclidean space, and a rule in d dimensions represents a d-dimensional hyper-rectangle. A classiﬁer is therefore a collection of prioritized hyper-rectangles, and a packet header represents a point in d dimensions. For example, Figure 49.3 shows the classiﬁer in Table 49.5 geometrically in which high priority rules overlay lower priority rules. Classifying a packet is equivalent to ﬁnding the highest priority rectangle that contains the point representing the packet. For example, point P(011,110) in Figure 3 would be classiﬁed by rule R5. There are several standard geometry problems such as ray shooting, point location and rectangle enclosure that resemble packet classiﬁcation. Point location involves ﬁnding the enclosing region of a point, given a set of non-overlapping regions. The best bounds for point location in N rectangular regions and d > 3 dimensions are O(log N ) time with O(N d ) space;† or O((log N )d−1 ) time with O(N ) space [8, 9]. In packet classiﬁcation, hyperrectangles can overlap, making classiﬁcation at least as hard as point location. Hence, a solution is either impracticably large (with 100 rules and 4 ﬁelds, N d space is about 100MBytes) or too slow ((log N )d−1 is about 350 memory accesses). We can conclude that: (1) Multi-ﬁeld classiﬁcation is considerably more complex than

† The

time bound for d ≤ 3 is O(log log N ) [8] but has large constant factors.

© 2005 by Chapman & Hall/CRC

49-6

Handbook of Data Structures and Applications Range [4, 7] [3, 8] [1, 14]

TABLE 49.6

Example 4-bit ranges and their constituent preﬁxes.

Category Basicdatastructures Geometry-based Heuristic Hardware

TABLE 49.7

Constituent Preﬁxes 01** 0011,01**,1000 0001,001*,01**,10**,110*,1110

Algorithms Linear search, caching, hierarchical tries, set-pruning tries Grid-of-tries, AQT, FIS RFC, hierarchical cuttings, tuple-space search Ternary CAM, bitmap-intersection (and variants)

Categories (not non-overlapping) of classiﬁcation algorithms.

one-dimensional longest preﬁx matching, and (2) Complexity may require that practical solutions use heuristics. Range lookups

Packet classiﬁcation is made yet more complex by the need to match on ranges as well as preﬁxes. The cases of looking up static arbitrary ranges, and dynamic conﬂict-free ranges in one dimension have been discussed in Chapter 48. One simple way to handle dynamic arbitrary (overlapping) ranges is to convert each W -bit range to a set of 2W − 2 preﬁxes (see Table 49.6) and then use any of the longest preﬁx matching algorithms detailed in Chapter 48, thus resulting in O(N W ) preﬁxes for a set consisting of N ranges.

49.3.2

Taxonomy of Classiﬁcation Algorithms

The classiﬁcation algorithms we will describe here can be categorized into the four classes shown in Table 49.7. We now proceed to describe representative algorithms from each class.

49.3.3

Basic Data Structures

Linear search

The simplest data structure is a linked-list of rules stored in order of decreasing priority. A packet is compared with each rule sequentially until a rule is found that matches all relevant ﬁelds. While simple and storage-eﬃcient, this algorithm clearly has poor scaling properties; the time to classify a packet grows linearly with the number of rules. Hierarchical tries

A d-dimensional hierarchical radix trie is a simple extension of the one dimensional radix trie data structure, and is constructed recursively as follows. If d is greater than 1, we ﬁrst construct a 1-dimensional trie, called the F 1-trie, on the set of preﬁxes {Rj1 }, belonging to dimension F 1 of all rules in the classiﬁer, C = {Rj } = {< Rj1 , Rj2 , . . . , Rjd >}. For each preﬁx, p, in the F 1-trie, we recursively construct a (d − 1)-dimensional hierarchical trie, Tp , on those rules which specify exactly p in dimension F 1, i.e., on the set of rules {Rj : Rj1 = p}. Preﬁx p is linked to the trie Tp using a next-trie pointer. The storage complexity of the data structure for an N -rule classiﬁer is O(N dW ). The data structure for the classiﬁer in Table 49.5 is shown in Figure 49.4. Hierarchical tries are sometimes called “multi-level tries,” “backtracking-search tries,” or “trie-of-tries”.

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

49-7

search path 1

0

F1-trie

1 0

0 0

R4

1

1

0 1

0

F2-tries

R6

R5

R1

R3

R2

FIGURE 49.4: A hierarchical trie data structure. The gray pointers are the “next-trie” pointers. The path traversed by the query algorithm on an incoming packet (000, 010) is shown.

search path

F1-trie

1 0

0

1

0 0

1

R4

R5

1

R1

R2

R3

1

0

x

R5 1

R5

R6

0

1

F2-tries R6

R2

FIGURE 49.5: A set-pruning trie data structure. The gray pointers are the “next-trie” pointers. The path traversed by the query algorithm on an incoming packet (000, 010) is shown.

Classiﬁcation of an incoming packet (v1 , v2 , . . . , vd ) proceeds as follows. The query algorithm ﬁrst traverses the F 1-trie based on the bits in v1 . At each F 1-trie node encountered, the algorithm follows the next-trie pointer (if present) and traverses the (d − 1)-dimensional trie. The query time complexity for d-dimensions is therefore O(W d ). Incremental updates can be carried out similarly in O(d2 W ) time since each component of the updated rule is stored in exactly one location at maximum depth O(dW ).

© 2005 by Chapman & Hall/CRC

49-8

Handbook of Data Structures and Applications

s

F1-trie

r T F2-tries w Tw

y x Tx

FIGURE 49.6: The conditions under which a switch pointer exists from node w to node x. Set-pruning tries

A set-pruning trie data structure [13] is similar, but with reduced query time obtained by replicating rules to eliminate recursive traversals. The data structure for the classiﬁer in Table 49.5 is shown in Figure 49.5. The query algorithm for an incoming packet (v1 , v2 , . . . , vd ) need only traverse the F 1-trie to ﬁnd the longest matching preﬁx of v1 , follow its next-trie pointer (if present), traverse the F 2-trie to ﬁnd the longest matching preﬁx of v1 , and so on for all dimensions. The rules are replicated to ensure that every matching rule will be encountered in the path. The query time is reduced to O(dW ) at the expense of increased storage of O(N d dW ) since a rule may need to be replicated O(N d ) times. Update complexity is O(N d ), and hence, this data structure works only for relatively static classiﬁers.

49.3.4

Geometric Algorithms

Grid-of-tries

The grid-of-tries data structure, proposed by Srinivasan et al [11] for 2-dimensional classiﬁcation, reduces storage space by allocating a rule to only one trie node as in a hierarchical trie, and yet achieves O(W ) query time by pre-computing and storing a switch pointer in some trie nodes. A switch pointer is labeled with ‘0’ or ‘1’ and guides the search process. The conditions which must simultaneously be satisﬁed for a switch pointer labeled b (b = ’0’ or ‘1’) to exist from a node w in the trie Tw to a node x of another trie Tx are (see Figure 49.6): 1. Tx and Tw are distinct tries built on the preﬁx components of dimension F 2. Tx and Tw are pointed to by two distinct nodes, say r and s respectively of the same trie, T , built on preﬁx components of dimension F 1. 2. The bit-string that denotes the path from the root node to node w in trie Tw concatenated with the bit b is identical to the bit-string that denotes the path from the root node to node x in the trie Tx . 3. Node w does not have a child pointer labeled b, and 4. Node s in trie T is the closest ancestor of node r that satisﬁes the above conditions.

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

49-9

search path

F1-trie

1

0

1 0

0

R3 0 0

R4 1

R1

1

1

1

1

0 1

R5

R6

F2-tries

R2

FIGURE 49.7: The grid-of-tries data structure. The switch pointers are shown dashed. The path traversed by the query algorithm on an incoming packet (000, 010) is shown. If the query algorithm traverses paths U 1(s, root(Tx ), y, x) and U 2(r, root(Tw ), w) in a hierarchical trie, it need only traverse the path (s, r, root(Tw ), w, x) on a grid-of-tries. This is because paths U 1 and U 2 are identical (by condition 2 above) till U 1 terminates at node w because it has no child branch (by condition 3 above). The switch pointer eliminates the need for backtracking in a hierarchical trie without the storage overhead of a set-pruning trie. Each bit of the packet header is examined at most once, so the time complexity reduces to O(W ), while storage complexity O(N W ) is the same as a 2-dimensional hierarchical trie. However, the presence of switch pointers makes incremental updates diﬃcult, so the authors recommend rebuilding the data structure (in time O(N W )) for each update. An example of the grid-of-tries data structure is shown in Figure 49.7. Reference [11] reports 2MBytes of storage for a 20,000 two-dimensional classiﬁer with destination and source IP preﬁxes in a maximum of 9 memory accesses. Grid-of-tries works well for two dimensional classiﬁcation, and can be used for the last two dimensions of a multi-dimensional hierarchical trie, decreasing the classiﬁcation time complexity by a factor of W to O(N W d−1 ). As with hierarchical and set-pruning tries, grid-of-tries handles range speciﬁcations by splitting into preﬁxes. Cross-producting

Cross-producting [11] is suitable for an arbitrary number of dimensions. Packets are classiﬁed by composing the results of separate 1-dimensional range lookups for each dimension as explained below. Constructing the data structure involves computing a set of ranges (basic intervals), Gk , of size sk = |Gk |, projected by rule speciﬁcations in each dimension k, 1 ≤ k ≤ d. Let rkj , 1 ≤ j ≤ sk , denote the j th range in Gk . rkj may be encoded simply as j in the k th k=d dimension. A cross-product table CT of size k=1 sk is constructed, and the best matching rule for each entry (r1i1 , r2i2 , . . . , rdid ), 1 ≤ ik ≤ sk , 1 ≤ k ≤ d is pre-computed and stored. Classifying a packet (v1 , v2 , . . . , vd ) involves a range lookup in each dimension k to identify the range rkik containing point vk . The tuple < r1i1 , r2i2 , . . . , rdid > (or, if using the above encoding for rkj , the tuple < i1 , i2 , . . . , id >) is then found in the cross-product table CT

© 2005 by Chapman & Hall/CRC

49-10

Handbook of Data Structures and Applications r11

r12

Crossproduct Table

r13

P r23

R5

111

(r11,r21)

110 101

(r11,r22) (r11,r23) (r12,r21) (r12,r22)

R6

100 r22 r2

1

011

R2

R3

010

R1

000

001

010

001

(r13,r21)

000

(r13,r22)

100 110 101 111 011

3

3

(r1 ,r2 )

R1 R2 R5 Ñ R2 R5 R3 R3 R5

FIGURE 49.8: The table produced by the crossproducting algorithm and its geometric representation.

0

1

F1-trie 0 search path

000, 001, 011 R1 R4

010, 011, 100, 111 R2

R5

100, 111

000, 011

R6

R3

FIGURE 49.9: The data structure of [7] for the example classiﬁer of Table 49.5. The search path for example packet P(011, 110) resulting in R5 is also shown.

which contains the pre-computed best matching rule. Figure 49.8 shows an example. Given that N preﬁxes lead to at most 2N − 2 ranges, sk ≤ 2N and CT is of size O(N d ). The lookup time is O(dtRL ) where tRL is the time complexity of ﬁnding a range in one dimension. Because of its high worst case storage complexity, cross-producting is suitable only for very small classiﬁers. Reference [11] proposes using an on-demand cross-producting scheme together with caching for classiﬁers bigger than 50 rules in ﬁve dimensions. Updates require reconstruction of the cross-product table, and so cross-producting is suitable for relatively static classiﬁers.

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

NW (00)

NE (10)

SW (01)

SE (11)

49-11

00

01 10

11

FIGURE 49.10: A quadtree constructed by decomposition of two-dimensional space. Each decomposition results in four quadrants. A 2-dimensional classiﬁcation scheme [7]

Lakshman and Stiliadis [7] propose a 2-dimensional classiﬁcation algorithm where one dimension, say F 1, is restricted to have preﬁx speciﬁcations while the second dimension, F 2, is allowed to have arbitrary range speciﬁcations. The data structure ﬁrst builds a trie on the preﬁxes of dimension F 1, and then associates a set Gw of non-overlapping ranges to each trie node, w, that represents preﬁx p. These ranges are created by (possibly overlapping) projections on dimension F 2 of those rules, Sw , that specify exactly p in dimension F 1. A range lookup data structure (e.g., an array or a binary search tree) is then constructed on Gw and associated with trie node w. An example is shown in Figure 49.9. Searching for point P (v1 , v2 ) involves a range lookup in data structure Gw for each trie node, w, encountered. The search in Gw returns the range containing v2 , and hence the best matching rule. The highest priority rule is selected from the rules {Rw } for all trie nodes encountered during the traversal. The storage complexity is O(N W ) because each rule is stored only once in the data structure. Queries take O(W log N ) time because an O(log N ) range lookup is performed for every node encountered in the F 1-trie. This can be reduced to O(W + log N ) using fractional cascading [1], but that makes incremental updates impractical. Area-based quadtree

The Area-based Quadtree (AQT) was proposed by Buddhikot et al. [2] for two-dimensional classiﬁcation. AQT allows incremental updates whose complexity can be traded oﬀ with query time by a tunable parameter. Each node of a quadtree [1] represents a two dimensional space that is decomposed into four equal sized quadrants, each of which is represented by a child node. The initial two dimensional space is recursively decomposed into four equalsized quadrants till each quadrant has at most one rule in it (Figure 49.10 shows an example of the decomposition). Rules are allocated to each node as follows. A rule is said to cross a quadrant if it completely spans at least one dimension of the quadrant. For instance, rule R6 spans the quadrant represented by the root node in Figure 49.10, while R5 does not. If we divide the 2-dimensional space into four quadrants, rule R5 crosses the north-west quadrant while rule R3 crosses the south-west quadrant. We call the set of rules crossing the quadrant represented by a node in dimension k, the k-crossing ﬁlter set (k-CFS) of that node. Two instances of the same data structure are associated with each quadtree node —

© 2005 by Chapman & Hall/CRC

49-12

Handbook of Data Structures and Applications

111

P R5

110 101

R6

00

100 011

R2

R3

R1

{R6}

search path

01

10

{R5}

{R2, R4}

010

01

001

{R1}

{R3}

000 000

001

010

100 110 101 111 011

FIGURE 49.11: An AQT data structure. The path traversed by the query algorithm on an incoming packet (000, 010) yields R1 as the best matching rule. each stores the rules in k-CFS (k=1,2). Since rules in crossing ﬁlter sets span at least one dimension, only the range speciﬁed in the other dimension need be stored. Queries proceed two bits at a time by transposing one bit from each dimension, with two 1-dimensional lookups being performed (one for each dimension on k-CFS) at each node. Figure 49.11 shows an example. Reference [2] proposes an eﬃcient update algorithm that, √ for N two-dimensional rules, has O(N W ) space complexity, O(αW ) search time and O(α α N ) update time, where α is a tunable integer parameter. Fat Inverted Segment tree (FIS-tree)

Feldman and Muthukrishnan [3] propose the Fat Inverted Segment tree (FIS-tree) for two dimensional classiﬁcation as a modiﬁcation of a segment tree. A segment tree [1] stores a set S of possibly overlapping line segments to answer queries such as ﬁnding the highest priority line segment containing a given point. A segment tree is a balanced binary search tree containing the end points of the line segments in S. Each node, w, represents a range Gw , the leaves represent the original line segments in S, and parent nodes represent the union of the ranges represented by their children. A line segment is allocated to a node w if it contains Gw but not Gparent(w) . The highest priority line segment allocated to a node is pre-computed and stored at the node. A query traverses the segment tree from the root, calculating the highest priority of all the pre-computed segments encountered. Figure 49.12 shows an example segment tree. An FIS-tree is a segment tree with two modiﬁcations: (1) The segment tree is compressed (made “fat” by increasing the degree to more than two) in order to decrease its depth and occupies a given number of levels l, and (2) Up-pointers from child to parent nodes are used. The data structure for 2-dimensions consists of an FIS-tree on dimension F 1 and a range lookup data associated with each node. An instance of the range lookup data structure associated with node w of the FIS-tree stores the ranges formed by the F 2-projections of those classiﬁer rules whose F 1-projections were allocated to w. A query for point P (v1 , v2 ) ﬁrst solves the range lookup problem on dimension F 1. This returns a leaf node of the FIS-tree representing the range containing the point v1 . The query algorithm then follows the up-pointers from this leaf node towards the root node, carrying

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

49-13

R6 R5 R2 R4

R3

R1 000 001

{R6} {R2, R5}

{R1, R4} [000,001]

[000,111]

{R3} [000,011] [100,111]

011

111

{R1, R2, R4, R5} [000,001]

{R2, R5}

{R3} [100,111]

[010,011] {R6} [000,111]

[010,011]

Segment Tree

FIS-tree

FIGURE 49.12: The segment tree and the 2-level FIS-tree for the classiﬁer of Table 49.5.

out 1-dimensional range lookups at each node. The highest priority rule containing the given point is calculated at the end of the traversal. Queries on an l-level FIS-tree have complexity O((l + 1)tRL ) with storage complexity O(ln1+1/l ), where tRL is the time for a 1-dimensional range lookup. Storage space can be traded oﬀ with search time by varying l. Modiﬁcations to the FIS-tree are necessary to support incremental updates — even then, it is easier to support inserts than deletes [3]. The static FIS-tree can be extended to multiple dimensions by building hierarchical FIStrees, but the bounds are similar to other methods studied earlier [3]. Measurements on real-life 2-dimensional classiﬁers are reported in [3] using the static FIS-tree data structure. Queries took 15 or fewer memory operations with a two level tree, 4-60K rules and 5MBytes of storage. Large classiﬁers with one million 2-dimensional rules required 3 levels, 18 memory accesses per query and 100MBytes of storage. Dynamic multi-level tree algorithms

Two algorithms, called Heap-on-Trie (HoT) and Binarysearchtree-on-Trie (BoT) are introduced in [6] that build a heap and binary search tree respectively on the last dimension, and multi-level tries on all the remaining d − 1 dimensions. If W = O(log N ): HoT has query complexity O(logd N ), storage complexity O(N logd N ), and update complexity O(logd+1 N ); and BoT has query complexity O(logd+1 N ), storage complexity O(N logd N ), and update complexity O(logd N ). If W = O(log N ), each of the above complexity formulae need to be modiﬁed to replace a factor O(logd−1 N ) with O(W d−1 ).

© 2005 by Chapman & Hall/CRC

49-14

Handbook of Data Structures and Applications

Simple One-step Classification 2S=2128

2T=212

Recursive Classification 2S=2128 Phase 0

264

224

Phase 1 Phase 2

2T=212 Phase 3

FIGURE 49.13: Showing the basic idea of Recursive Flow Classiﬁcation. The reduction is carried out in multiple phases, with a reduction in phase I being carried out recursively on the image of the phase I − 1. The example shows the mapping of 2S bits to 2T bits in three phases.

49.3.5

Heuristics

As we saw in Section 49.3.1, the packet classiﬁcation problem is expensive to solve in the worst-case — theoretical bounds state that solutions to multi-ﬁeld classiﬁcation either require storage that is geometric, or a number of memory accesses that is polylogarithmic, in the number of classiﬁcation rules. We can expect that classiﬁers in real networks have considerable structure and redundancy that might be exploited by a heuristic. That is the motivation behind the algorithms described in this section. Recursive Flow Classiﬁcation (RFC)

RFC [4] is a heuristic for packet classiﬁcation on multiple ﬁelds. Classifying a packet involves mapping S bits in the packet header to a T bit action identiﬁer, where T = log N, T S. A simple, but impractical method could pre-compute the action for each of the 2S diﬀerent packet headers, yielding the action in one step. RFC attempts to perform the same mapping over several phases, as shown in Figure 49.13; at each stage the algorithm maps one set of values to a smaller set. In each phase a set of memories return a value shorter (i.e., expressed in fewer bits) than the index of the memory access. The algorithm, illustrated in Figure 49.14, operates as follows: 1. In the ﬁrst phase, d ﬁelds of the packet header are split up into multiple chunks that are used to index into multiple memories in parallel. The contents of each memory are chosen so that the result of the lookup is narrower than the index. 2. In subsequent phases, memories are indexed using the results from earlier phases. 3. In the ﬁnal phase, the memory yields the action. The algorithm requires construction of the contents of each memory detailed in [4]. This paper reports that with real-life four-dimensional classiﬁers of up to 1,700 rules, RFC appears practical for 10Gbps line rates in hardware and 2.5Gbps rates in software. However, the storage space and pre-processing time grow rapidly for classiﬁers larger than 6,000 rules. An optimization described in [4] reduces the storage requirement of a 15,000 four-ﬁeld classiﬁer to below 4MBytes.

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

49-15

Preprocessed Tables

indx

Packet

Phase 0

Phase 1

Phase 2

Phase 3

FIGURE 49.14: Packet ﬂow in RFC.

Hierarchical Intelligent Cuttings (HiCuts)

HiCuts [5] partitions the multi-dimensional search space guided by heuristics that exploit the structure of the classiﬁer. Each query leads to a leaf node in the HiCuts tree, which stores a small number of rules that can be searched sequentially to ﬁnd the best match. The characteristics of the decision tree (its depth, degree of each node, and the local search decision to be made at each node) are chosen while pre-processing the classiﬁer based on its characteristics (see [5] for the heuristics used). Each node, v, of the tree represents a portion of the geometric search space. The root node represents the complete d-dimensional space, which is partitioned into smaller geometric sub-spaces, represented by its child nodes, by cutting across one of the d dimensions. Each sub-space is recursively partitioned until no sub-space has more than B rules, where B is a tunable parameter of the pre-processing algorithm. An example is shown in Figure 49.15 for two dimensions with B = 2. Parameters of the HiCuts algorithm can be tuned to trade- oﬀ query time against storage requirements. On 40 real-life four-dimensional classiﬁers with up to 1,700 rules, HiCuts requires less than 1 MByte of storage with a worst case query time of 20 memory accesses, and supports fast updates.

© 2005 by Chapman & Hall/CRC

49-16

Handbook of Data Structures and Applications

111

P R5

110 101

R6

(2*8,Y,2)

100 011

R2 R3

Cut across Y

R2 R5

R3 R6

R3 R6

010 001

R1

(8*8,X,4)

Cut across X

R1 R2

R5

000 000

001

010

100 110 101 111 011

FIGURE 49.15: A possible HiCuts tree for the example classiﬁer in Table 49.5. Each ellipse in the tree denotes an internal node v with a tuple <size of 2-dimensional space represented, dimension to cut across, number of children>. Each square is a leaf node which contains the actual classiﬁer rules.

Rule R1 R2 R3 R4 R5 R6

Specification (00*,00*) (0**,01*) (1**,0**) (00*,0**) (0**,1**) (***,1**)

Tuple (2,2) (1,2) (1,1) (2,1) (1,1) (0,1)

Tuple Hash Table Entries {R6} (0,1) (1,1) {R3,R5} (1,2) {R2} (2,1) {R4} (2,2) {R1}

FIGURE 49.16: The tuples and associated hash tables in the tuple space search scheme for the example classiﬁer of Table 49.5. Tuple Space Search

The basic tuple space search algorithm [12] decomposes a classiﬁcation query into a number of exact match queries. The algorithm ﬁrst maps each d-dimensional rule into a d-tuple whose ith component stores the length of the preﬁx speciﬁed in the ith dimension of the rule (the scheme supports only preﬁx speciﬁcations). Hence, the set of rules mapped to the same tuple are of a ﬁxed and known length, and can be stored in a hash table. Queries perform exact match operations on each of the hash tables corresponding to all possible tuples in the classiﬁer. An example is shown in Figure 49.16. Query time is M hashed memory accesses, where M is the number of tuples in the classiﬁer. Storage complexity is O(N ) since each rule is stored in exactly one hash table. Incremental updates are supported and require just one hashed memory access to the hashed table associated with the tuple of the modiﬁed rule. In summary, the tuple space search algorithm performs well for multiple dimensions in the average case if the number of tuples is small. However, the use of hashing makes the time complexity of searches and updates non-deterministic. The number of tuples could be very large, up to O(W d ), in the worst

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

49-17

Destination Address memory location: 1

2

N

Memory Array matched:

0

1

0

TCAM

1 Priority Encoder memory location

Action Memory

RAM

Next-hop FIGURE 49.17: The classiﬁcation operation using a ternary CAM. The packet header in this example is assumed to comprise only the destination address. case. Furthermore, since the scheme supports only preﬁxes, the storage complexity increases by a factor of O(W d ) for generic rules as each range could be split into W preﬁxes in the manner explained in Section 49.3.1. Of course, the algorithm becomes attractive for real-life classiﬁers that have a small number of tuples.

49.3.6

Hardware-Based Algorithms

Ternary CAMs

A TCAM stores each W -bit ﬁeld as a (val, mask) pair; where val and mask are each W -bit numbers. A mask of ‘0’ wildcards the corresponding bit position. For example, if W = 5, a preﬁx 10* will be stored as the pair (10000, 11000). An element matches a given input key by checking if those bits of val for which the mask bit is ‘1’, match those in the key. A TCAM is used as shown in Figure 49.17. The TCAM memory array stores rules in decreasing order of priorities, and compares an input key against every element in the array in parallel. The N -bit bit-vector, matched, indicates which rules match and so the N -bit priority encoder indicates the address of the highest priority match. The address is used to index into a RAM to ﬁnd the action associated with this preﬁx. TCAMs are being increasingly deployed because of their simplicity of use and speed (as they are able to do classiﬁcation in hardware at the rate of the hardware clock). Several companies today ship 9Mb TCAMs capable of single and multi-ﬁeld classiﬁcation in as little as 10ns. Both faster and denser TCAMs can be expected in the near future. There are, however, some disadvantages to TCAMs:

© 2005 by Chapman & Hall/CRC

49-18

Handbook of Data Structures and Applications

1. A TCAM is less dense than a RAM, storing fewer bits in the same chip area. One bit in an SRAM typically requires 4-6 transistors, while one bit in a TCAM requires 11-15 transistors [10]. A 9Mb TCAM running at 100 MHz costs about $200 today, while the same amount of SRAM costs less than $10. Furthermore, range speciﬁcations need to be split into multiple masks, reducing the number of entries by up to (2W − 2)d in the worst case. If only two 16-bit dimensions specify ranges, this is a multiplicative factor of 900. Newer TCAMs, based on DRAM technology, have been proposed and promise higher densities. 2. TCAMs dissipate more power than RAM solutions because an address is compared against every TCAM element in parallel. At the time of writing, a 9Mb TCAM chip running at 100 MHz dissipates about 10-15 watts (the exact number varies with manufacturer). In contrast, a similar amount of SRAM running at the same speed dissipates 1W. 3. A TCAM is more unreliable while being in operational use in a router in the ﬁeld than a RAM, because a soft-error (error caused by alpha particles and package impurities that can ﬂip a bit of memory from 0 to 1, or vice-versa) could go undetected for a long amount of time. In a SRAM, only one location is accessed at any time, thus enabling easy on-the-ﬂy error detection and correction. In a TCAM, wrong results could be given out during the time that the error is undetected – which is particularly problematic in such applications as ﬁltering or security. However, the above disadvantages of a TCAM need to be weighed against its enormous simplicity of use in a hardware platform. Besides, it is the only known “algorithm” that is capable of doing classiﬁcation at high speeds without explosion in either storage space or time. Due to their high cost and power dissipation, TCAMs will probably remain unsuitable in the near future for (1) Large classiﬁers (512K-1M rules) used for microﬂow recognition at the edge of the network, (2) Large classiﬁers (256-512K rules) used at edge routers that manage thousands of subscribers (with a few rules per subscriber). Of course, softwarebased routers need to look somewhere else. Bitmap-intersection

The bitmap-intersection classiﬁcation scheme, proposed in [7], is based on the observation that the set of rules, S, that match a packet is the intersection of d sets, Si , where Si is the set of rules that match the packet in the ith dimension alone. While cross-producting pre-computes S and stores the best matching rule in S, this scheme computes S and the best matching rule during each classiﬁcation operation. In order to compute intersection of sets in hardware, each set is encoded as an N -bit bitmap where each bit corresponds to a rule. The set of matching rules is the set of rules whose corresponding bits are ‘1’ in the bitmap. A query is similar to cross-producting: First, a range lookup is performed in each of the d dimensions. Each lookup returns a bitmap representing the matching rules (pre-computed for each range) in that dimension. The d sets are intersected (a simple bit-wise AND operation) to give the set of matching rules, from which the best matching rule is found. See Figure 49.18 for an example. Since each bitmap is N bits wide, and there are O(N ) ranges in each of d dimensions, the storage space consumed is O(dN 2 ). Query time is O(dtRL + dN/w) where tRL is the time to do one range lookup and w is the memory width. Time complexity can be reduced by a factor of d by looking up each dimension independently in parallel. Incremental updates

© 2005 by Chapman & Hall/CRC

Multi-Dimensional Packet Classiﬁcation

Dimension 2

Dimension 1 r11 r12 r13

49-19

{R1,R2,R4,R5,R6} {R2,R5,R6} {R3,R6} Query on P(011,010):

110111 010011 001001

r21 r22 r23

{R1,R3,R4} {R2,R3} {R5,R6}

101100 011000 000111

010011 Dimension 1 bitmap 000111 Dimension 2 bitmap 000011 R5 Best matching rule

FIGURE 49.18: Bitmap tables used in the “bitmap-intersection” classiﬁcation scheme. See Figure 49.8 for a description of the ranges. Also shown is classiﬁcation query on an example packet P(011, 110). Algorithm Linear Search Ternary CAM1 Hierarchical Tries Set-pruning Tries Grid-of-Tries Cross-producting FIS-tree RFC Bitmap-intersection HiCuts Tuple Space Search

TABLE 49.8

Worst-case time complexity N 1 Wd dW W d−1 dW (l + 1)W d dW + N/memwidth d N

Worst-case storage complexity N N N dW Nd N dW Nd l ∗ N 1+1/l Nd dN 2 Nd N

Complexity of various classiﬁcation algorithms. N is the number of rules in d, W -bit wide, dimensions.

are not supported. Reference [7] reports that the scheme can support up to 512 rules with a 33 MHz ﬁeldprogrammable gate array and ﬁve 1Mbit SRAMs, classifying 1Mpps. The scheme works well for a small number of rules in multiple dimensions, but suﬀers from a quadratic increase in storage space and linear increase in classiﬁcation time with the size of the classiﬁer. A variation is described in [7] that decreases storage at the expense of increased query time. This work has been extended signiﬁcantly by [14] by aggregating bitmaps wherever possible and thus decreasing the time spent in reading the bitmaps. Though the bitmap-intersection scheme is primarily meant for hardware, it is easy to see how it can be used in software, where the aggregated bitmap technique of [14] could be especially useful.

49.4

Summary

Please see Table 49.8 for a summary of the complexities of classiﬁcation algorithms described in this chapter.

References [1] M. de Berg, M. van Kreveld, and M. Overmars. Computational Geometry: Algorithms and Applications, Springer-Verlag, 2nd rev. ed. 2000.

© 2005 by Chapman & Hall/CRC

49-20

Handbook of Data Structures and Applications

[2] M.M. Buddhikot, S. Suri, and M. Waldvogel. “Space decomposition techniques for fast layer-4 switching,” Proceedings of Conference on Protocols for High Speed Networks, pages 25-41, August 1999. [3] A. Feldman and S. Muthukrishnan. “Tradeoﬀs for packet classiﬁcation,” Proceedings of Infocom, vol. 3, pages 1193-202, March 2000. [4] P. Gupta and N. McKeown. “Packet Classiﬁcation on Multiple Fields,” Proc. Sigcomm, Computer Communication Review, vol. 29, no. 4, pp 147-60, September 1999, Harvard University. [5] P. Gupta and N. McKeown. “Packet Classiﬁcation using Hierarchical Intelligent Cuttings,” Proc. Hot Interconnects VII, August 99, Stanford. This paper is also available in IEEE Micro, pp 34-41, vol. 20, no. 1, January/February 2000. [6] P. Gupta and N. McKeown. “Dynamic Algorithms with Worst-case Performance for Packet Classiﬁcation”, Proc. IFIP Networking, pp 528-39, May 2000, Paris, France. [7] T.V. Lakshman and D. Stiliadis. “High-Speed Policy-based Packet Forwarding Using Eﬃcient Multi-dimensional Range Matching”, Proceedings of ACM Sigcomm, pages 191-202, September 1998. [8] M.H. Overmars and A.F. van der Stappen. “Range searching and point location among fat objects,” Journal of Algorithms, vol. 21, no. 3, pages 629-656, November 1996. [9] F. Preparata and M. I. Shamos. Computational geometry: an introduction, SpringerVerlag, 1985. [10] F. Shafai, K.J. Schultz, G.F. R. Gibson, A.G. Bluschke and D.E. Somppi. “Fully parallel 30-Mhz, 2.5 Mb CAM,” IEEE Journal of Solid-State Circuits, vol. 33, no. 11, November 1998. [11] V. Srinivasan, S. Suri, G. Varghese, and M. Waldvogel. “Fast and Scalable Layer four Switching,” Proceedings of ACM Sigcomm, pages 203-14, September 1998. [12] V. Srinivasan, S. Suri, and G. Varghese. “Packet Classiﬁcation using Tuple Space Search”, Proceedings of ACM Sigcomm, pages 135-46, September 1999. [13] P. Tsuchiya. “A search algorithm for table entries with non-contiguous wildcarding,” unpublished report, Bellcore. [14] F. Baboescu and G. Varghese. “Scalable packet classiﬁcation,” Proc. Sigcomm, 2001.

© 2005 by Chapman & Hall/CRC

50 Data Structures in Web Information Retrieval 50.1 50.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inverted Indices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index Compression

Monika Henzinger Google Inc.

50.1

50.3 50.4 50.5

•

50-1 50-1

Index Granularity

Fingerprints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finding Near-Duplicate Documents . . . . . . . . . . . . . Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50-3 50-4 50-6

Introduction

Current search engines process thousands of queries per second over a collection of billions of web pages with a sub-second average response time. There are two reasons for this astonishing performance: Massive parallelism and a simple yet eﬃcient data structure, called inverted index. In this chapter we will describe inverted indices. The parallelism deployed by search engines is quite straightforward: Given a collection of documents and a user query the goal of information retrieval is to ﬁnd all documents that are relevant to a user query and return them in decreasing order of relevance. Since on the Web there are often thousands of matches for a given user query, Web search engines usually return just the top 10 results and retrieve more results only upon request. This can be easily parallelized over m machines: Distribute the documents equally over m − 1 machines, ﬁnd the best up to 10 documents for each machine and return them to the machine without documents, which then merges the lists to determine the overall top 10. Since the users are only presented with the top 10 results they are usually annoyed if these results contain duplicates or near-duplicates. Thus, it is crucial for a search engine to detect near-duplicate web pages. In Section 50.4 we will describe a technique for doing so based on ﬁngerprints, which we will introduce in Section 50.3.

50.2

Inverted Indices

Given a user query consisting of terms t1 , . . . , tn , a search engine has to ﬁnd all documents relevant to the query. Usually Web search engines make the following simplifying assumption: A document is relevant only if it contains all query terms. To ﬁnd all these documents the search engine uses the inverted (ﬁle) index data structure. It consists of two parts:

50-1

© 2005 by Chapman & Hall/CRC

50-2

Handbook of Data Structures and Applications

• A data structure containing every word t that appears in at least one document together with a pointer pt for each word and potentially a count ft of the number of documents containing the word; and • an inverted list for every term t that consists of all the documents containing t and is pointed to by pt . One popular implementation is to store the sorted list of words in a search tree whose leaves are connected by a linked list. This imposes an order on the words. The inverted lists are implemented as one large (virtual) array such that t’s inverted list consists of all documents between the position in the array pointed to by pt and by pt , where t is the term following t in the sorted list. in the web scenario this array does not ﬁt onto a single machine and thus needs to be distributed over multiple machines, either in RAM or on disk. Another implementation would be to store the list of words in any search tree or hash function together with the pointers pt . A special terminator document id (like 0) is appended to the inverted lists and they can be stored either in one large array or in multiple arrays. To determine all documents containing the query terms t1 , . . . , tn (called a Boolean AND) the intersection of their inverted lists can be computed by traversing their lists in parallel. If one of the query terms is negated (Boolean NOT), i.e. the user does not want this term to be contained in the query, the negation of the corresponding list is used. To speed up the computation in the case that a very frequent term is combined with a very infrequent term the documents in the inverted list are stored in sorted order and a one-level or two-level search tree is stored for each inverted list. The one-level search tree consists of every 1/f -th entry entry in the inverted list together with a pointer to the location of this entry in the inverted list, where f is a constant like 100. At query time entries in the inverted list of the frequent term can be skipped quickly to get to the next document that contains the infrequent term. The space requirement is only 1/f of the space requirement of the space requirement of the inverted lists.

50.2.1

Index Compression

Of course, data compression is crucial when indexing billions of documents. For that it is usually assumed that the documents are numbered consecutively from 1 to N and that the documents are stored in the inverted list by increasing document id. A simple but powerful technique is called delta-encoding: Instead of storing the actual document ids in the inverted list, the document id of the ﬁrst document is stored together with the diﬀerence between the i-th and the i + 1-st document containing the term. When traversing the inverted list the ﬁrst document id is summed up with delta-values seen so far to get the document id of the current document. Note that delta-encoding does not interfere with the one-level or two-level search tree stored on top of the inverted list. The advantage of delta-encoding is that it turns large integer (document ids) into mostly small integers (the delta values), depending of course on the value of ft . A variable length encoding scheme, like Golomb codes, of the delta values then leads to considerable space saving. We sketch Golomb codes in the next paragraph. See [13] for more details on variable compression schemes. There if a trade-oﬀ between the space used for the index and the time penalty encountered at query time for decompressing the index. If the index is read from disk, the time to read the appropriate part of the index dominates the compression time and thus more compression can be used. If the index is in RAM, then less compression should be used, except if sophisticated compression is the only way to make the index ﬁt in RAM. Let n be the number of unique words in all the documents and let f be the number of words in all the documents, including repetitions. Given an integer x it takes at least log x

© 2005 by Chapman & Hall/CRC

Data Structures in Web Information Retrieval

50-3

bits to represent x in binary. However, the algorithm reading the index needs to know how many bits to read. There are these two possibilities: (1) represent x is in binary by log N bits in binary with the top log N − log x bits set to 0; or (2) represent x in unary by x 1’s followed by a 0. Usually the binary representation is chosen, but the unary representation is more space eﬃcient when x < log N . Golumb codes combine both approaches as follows. Choose b ≈ 0.69 Nf·n . The Golumb code for an integer x ≥ 1 consists of two parts: • A unary encoding of q followed by 0, where q = (x − 1)/b; and • a binary encoding of the remainder r = x − qb − 1. If b is a power of 2, this requires log b bits. Note that Nf·n is the average distance between entries in the inverted index, i.e., the average value after the delta-encoding. The value of b was chosen to be roughly 69% of the average. Every entry of value b or less requires 1 bit for the unary part and log b bits for the binary part. This is a considerable space saving over the binary representation since log b + 1 < log N . As long as (x − 1)/b < log N − log b − 1, there is a space saving over implementing using the binary encoding. So only entries that are roughly log N times larger than the average require more space than the average. If the frequency ft of a term t is known, then the inverted list of t can be compressed even better using bt ≈ 0.69 fNt instead of b. This implies that for frequent terms, bt is smaller than b and thus fewer bits are used for small integers, which occur frequently in the delta-encoding of frequent terms.

50.2.2

Index Granularity

Another crucial issue is the level of granularity used in the inverted index. So far, we only discussed storing document ids. However to handle some query operators, like quotes, that require the query term to be next to each other in the document, the exact position of the document is needed. There are two possible ways to handle this: (1) One way is to consider all documents to be concatenated into one large document and then store the positions in this large document instead of the document ids. Additionally one special inverted list is constructed that stores the position of the ﬁrst word of each document. At query time an implicit Boolean AND operation is performed with this special inverted list to determine to which document a given position belongs. Note that the above compression techniques continue to work. This approach is very space eﬃcient but incurs a run-time overhead at query time for traversing the special inverted list and performing the Boolean AND operation. (2) Another solution is to store (document id,position)-pairs in the inverted list and to delta-encode the document ids and also the position within the same document. This approach uses more space, but does not incur the run-time overhead. Another data structure that a search engine could use are suﬃx trees (see Chapter 29). They require, more space and are more complicated, but allow more powerful operations, like searching for syllables or letters.

50.3

Fingerprints

Fingerprints are short strings that represent larger strings and have the following properties: • If the ﬁngerprints of two strings are diﬀerent then the strings are guaranteed to be diﬀerent.

© 2005 by Chapman & Hall/CRC

50-4

Handbook of Data Structures and Applications

• If the ﬁngerprints of two strings are identical then there is only a small probability that the strings are diﬀerent. If two diﬀerent strings have the same ﬁngerprint, it is called a collision. Thus, ﬁngerprints are a type of hash functions where the hash table is populated only very sparsely in exchange for a very low collision probability. Fingerprints are very useful. For example, search engines can use them to quickly check whether a URL that is contained on a web page is already stored in the index. We will describe how they are useful for ﬁnding near-duplicate documents in the next section. One ﬁngerprinting scheme is due to Rabin [12] and is equivalent to cyclic redundancy checks. We follow here the presentation by Broder [3]. Let s be a binary string and let s = 1s, i.e. s equals s preﬁxed with a 1. The string s = (s1 , s2 , . . . , sm ) induces a polynomial S(t) over Z2 as follows: S(t) = s1 tm−1 + s2 tm−2 + · · · + sm . Let P (t) be an irreducible polynomial of degree k over Z2 . The ﬁngerprint of s is deﬁned to be the polynomial f (s) = S(t) mod P (t) over Z2 , which can be simply represented as a string of its coeﬃcients. As shown in [3] the probability that two distinct strings of length m from a set of n strings have the same ﬁngerprint is less than nm2 /2k . Thus, given n and m the probability of collision can be reduced to the required value simply by increasing k, i.e. the length of a ﬁngerprint. Rabin’s ﬁngerprints have the property that given two overlapping strings s = (s1 , s2 , . . . , sm ) and t = (t1 , t2 , . . . , tm ) such that ti+1 = si for all 1 ≤ i < m then the ﬁngerprint of t can be computed from the ﬁngerprint of s very eﬃciently: If f (s) = r1 tk−1 + r2 tk−2 + · · · + rk , then f (t) = r2 tk−1 + r3 tk−2 + · · · + rk t + tm + (r1 tk )modP (t). Note that Q(t) = tk modP (t) is equivalent to P (t) with the leading coeﬃcient removed, which means it can be computed easily. Thus f (t) = r2 tk−1 + r3 tk−2 + · · · + rk t + tm + r1 Q(t). Hence f (t) can be computed from f (s) as follows: Assume f (s) is stored in a shift register and Q(t) is stored in another register. Shift left with tm as input and if r1 = 1 perform a bit-wise EX-OR operation with Q(t). See [3] for a software implementation for a typical 32-bit word computer. Other ways of computing ﬁngerprints are cryptographic checksums like Sha-1 or MD5.

50.4

Finding Near-Duplicate Documents

Users of search engine strongly dislike getting near-duplicate results on the same results page. Of course it depends on the user what s/he considers to be near-duplicate. However, most users would agree that pages with the same content except for diﬀerent ads or a diﬀerent layout or a diﬀerent header or footer are near-duplicates. By “near-duplicate” we mean these kinds of “syntactic” duplicates – semantic duplication is even harder detect. Unfortunately, there are a variety of circumstances that create near-duplicate pages. The main reasons are (1) local copies of public-domain pages (for example the PERL-manual

© 2005 by Chapman & Hall/CRC

Data Structures in Web Information Retrieval

50-5

or the preamble of the US constitution) or various databases and (2) multiple visits of the same page by the crawler (the part of the search engine that retrieves web pages to store in the index) without detection of the replication. The latter can happen because there were small changes to the URL and the content of the page. Usually, crawlers ﬁngerprint the URL as well as the content of the page and thus can easily detect exact duplicates. There are various approaches to detect near-duplicate pages. One approach that works very well in the Web setting was given by Broder [4] and was validated on the Web [6]. The basic idea is to associate a set of ﬁngerprints with each document such that the similarity of two pages is proportional to the size of the intersection of their respective sets. We describe ﬁrst how to compute the ﬁngerprints and show then how they can be used to eﬃciently detect near-duplicates. The set of ﬁngerprints for a document is computed using the shingling technique introduced by Brin et al. [2]. Let a token be either a letter, a word, a line, or a sentence in a document. Each document consists of a sequence of token. We call a contiguous sequence of q tokens a q-shingle of the document. We want to compute ﬁngerprints for all q-shingles in a document. Using Rabin’s ﬁngerprints this can be done eﬃciently if we start from the ﬁrst shingle and then use a sliding window approach to compute the ﬁngerprint of the shingle currently in the window. Let SD be the set of ﬁngerprints generated for document D. The idea is simply to deﬁne the similarity or resemblance r(A, B) of document A and B as r(A, B) =

|SA ∩ SB | . |SA ∪ SB |

Experiments have indicated that a resemblance value close to 1 captures well the information notion of “syntactic” near-duplication that we discussed above. Storing the whole set SD would take a lot of space. It suﬃces, however, to keep a ﬁxed number of ﬁngerprints from SD for each document D. This subset is called a sketch. As we will show below the sketches can be computed in time linear in the size of D and will be stored for each document. The resemblance of two documents can be approximated by using the sketches instead of the full sets of ﬁngerprints. Thus, the time is only linear in the size of the sketches. Sketches are determined as follows: Recall that each ﬁngerprints requires k bits. Thus, SD ⊆ {1, . . . , n}, where n = 2k . Let π be a permutation chosen uniformly at random from the set of all permutations of [n]. Let X = min(min{π(SA )}, min{π(SB )}). The crucial observation is that if min{π(SA )} = min{π(SB )}, then X = min{π(SA )} must belong to π(SA ) ∩ π(SB ). If min{π(SA )} = min{π(SB )}, then X belongs to either π(SA ) − π(SB ) or to π(SB ) − π(SA ), and, thus, X does not belong to π(SA ) ∩ π(SB ). It follows that min{π(SA )} = min{π(SB )} if and only if X belongs to π(SA ) ∩ π(SB ). Since π was chosen uniformly at random the probability of the latter is |SA ∩ SB | = r(A, B). |SA ∪ SB | It follows that P r (min{π(SA )} = min{π(SB )}) = r(A, B). We choose p independent random permutations. For each document the sketch consists of the permuted ﬁngerprint values min{π1 (SD )}, min{π2 (SD )}, . . . , min{πp (SD )}. The resemblance of two documents is then estimated by the intersection of their sketches, whose expected value is proportional to the resemblance. In practice, π cannot be chosen uniformly at random which led to the study of min-wise independent permutations [5].

© 2005 by Chapman & Hall/CRC

50-6

Handbook of Data Structures and Applications

To detect the near-duplicates in a set of documents we build for each shingle in a sketch the list of documents to which this shingle belongs. Using this list we generate for each shingle and each pair of document containing this shingle an (document id, document id)pair. Finally we simply sort these pairs to determine the resemblance for each pair. The running time is proportional to the number of (document id, document id)-pairs. If each shingle only belongs to a constant number of documents, it is linear in the number of unique shingles. In a web search engine it often suﬃces to remove the near-duplicates at query time. To do this the sketch is stored with each document. The search engine determines the top 50 or so results and then performs a pair-wise near-duplicate detection with some resemblance threshold, removing the near duplicate results, to determine the top 10 results. The described near-duplicate detection algorithm assumes that the similarity between documents depends on the size of the overlap in their ﬁngerprint sets. This corresponds to the Jaccard coeﬃcient of similarity used in information retrieval. A more standard approach in information retrieval is to assign a weight vector of terms to each document and to deﬁne the similarity of two documents as the cosine of their (potentially normalized) term vectors. Charikar [7] gives an eﬃcient near-duplicate detection algorithm based on this measure. He also presents a near-duplicate detection algorithms for another metric, the Earth Mover Distance. Other similarity detection mechanisms are given in [2, 9–11]. Many near-duplicate web pages are created because a whole web host is duplicated. Thus, a large percentage of the near-duplicate web pages can be detected if near-duplicate web hosts can be found. Techniques for this problem are presented in [1, 8].

50.5

Conclusions

In this chapter we presented the dominant data structure for web search engines, the inverted index. We also described ﬁngerprints, which are useful at multiple places in a search engine, and document sketches for near-duplicate detection. Other useful data structures for web information retrieval are adjacency lists: All web search engines claim to perform some type of analysis of the hyperlink structure. For this, they need to store the list of incoming links for each document, a use of the classic adjacency list representation. Web search engines also sometimes analyze the log of the user queries issued at the search engine. With hundreds of millions of queries per day these logs are huge and can only be processed with one-pass data stream algorithms.

References [1] Bharat, K, Broder, A.Z, Dean, J., and Henzinger, M. R., 2000. A comparison of techniques to ﬁnd mirrored hosts on the WWW. In Journal of the American Society for Information Science, 51(12):114-1122. [2] Brin, S., Davis, J., and Garcia-Molina, H., 1995. Copy detection mechanisms for digital documents. In Proceedings 1995 ACM SIGMOD International conference on Management of Data, 398–409. [3] Broder, A. Z., 1993. Some applications of Rabin’s ﬁngerprinting method. In Capocelli, R., De Santis, A., and Vaccaro, U., editors, Sequences II: Methods in Communications, Security, and Computer Science, Springer-Verlag, 143–152. [4] Broder, A. Z., 1997. On the resemblance and containment of documents. In Proceedings of Compression and Complexity of Sequences 1997, IEEE Computer Society, 21–29.

© 2005 by Chapman & Hall/CRC

Data Structures in Web Information Retrieval [5] Broder, A. Z., Charikar, M., Frieze, A., and Mitzenmacher, M., 1998. Min-wise independent permutations. In Proceedings 30th Annual ACM Symposium on Theory of Computing, ACM Press, 327–336. [6] Broder, A. Z., Glassman, S. C., Manasse, M. S., Zweig, G., 1997. Syntactic clustering of the Web. In Proceedings Sixth International World Wide Web Conference, Elsevier Science, 391–404. [7] Charikar, M. S., 2002. Similarity estimation techniques from rounding algorithms. In Proceedings 34th Annual ACM Symposium on Theory of Computing, ACM Press, 380–388. [8] Cho, J., Shivakumar, N., and Garcia-Molina, H., 2000. Finding replicated web collections. In Proceedings 2000 ACM International Conference on Management of Data, ACM Press, 355–366. [9] Heintze, N., 1996. Scalable document ﬁngerprinting. In Proceedings second USENIX Workshop on Electronic Commerce, 191–200. [10] Manber, U., 1994. Finding similar ﬁles in a large ﬁle system. In Proceedings Winter 1994 USENIX Conference, 1–10. [11] Shivakumar, N. and Garcia-Molina, H., 1995. SCAM: A copy detection mechanism for digital documents. In Proceedings Second Annual Conference on the Theory and Practice of Digital Libraries. [12] Rabin, M. O., 1981. Fingerprinting by random polynomials. Technical Report TR-15-81, Center for Research in Computing Technology, Harvard University. [13] Witten, I. H., Moﬀat, A., and Bell, T. C., 1999. Managing Gigabytes. Compressing and Indexing Documents and Images. Morgan Kaufmann, San Francisco.

© 2005 by Chapman & Hall/CRC

50-7

51 The Web as a Dynamic Graph 51.1 51.2 51.3 51.4

51.1

51-1 51-2 51-3 51-7

Generating Function Framework • Average Path Length • Emergence of Giant Components • Search on Web Graphs • Crawling and Trawling

S. N. Maheshwari Indian Institute of Technology, Delhi

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Experimental Observations . . . . . . . . . . . . . . . . . . . . . . . Theoretical Growth Models . . . . . . . . . . . . . . . . . . . . . . . Properties of Web Graphs and Web Algorithmics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

51.5

Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-13

Introduction

The World Wide Web (the Web) was started as an experimental network in 1991. Its growth since then can only be termed explosive. It has several billion pages today and is growing exponentially with time. This growth is totally distributed. There is no central authority to control the growth. The hyperlinks endow the Web with some structure in the sense that viewing the individual web pages as nodes and the hyperlinks as directed edges between them, the Web can be looked upon as a directed graph. What stands out is that this directed graph is not only dynamic—it is rapidly growing and changing—it has been much too large for some time to even have a complete snapshot. Experimental understanding of its structure is based on large but partial web crawls. What properties are being investigated is itself driven by the requirements of the increasingly sophisticated nature of the applications being developed as well as analogies and insights from ﬁelds like bibliometrics involving study of citations in academic literature [17]. Let us brieﬂy consider topic search, discussed in detail in Chapter 50, which involves searching for pages on the Web which correspond closely to a given search topic. The seminal work in this area is Kleinberg’s HITS algorithm [19] that assumes that for any topic on the Web there are pages which could be considered to be “authoritative” on that topic, and pages which are “hubs” in the sense that they contain links to relevant pages on that topic. Given a collection of pages and links between them, selected by some sampling method as pertaining to the given topic, HITS algorithm ranks the pages by weights which are representative of the quality of the pages as hubs or authorities. These weights are nothing but principal eigen values, and are, in some sense, a “measure” of the “denseness” of the interconnections between the pages. This model of dense interconnection between hubs and authorities of a given topic gave rise to the notion of “cyber communities” in the Web associated with diﬀerent topics. Underlying this model of cyber communities was the hypothesis that a subgraph representing a Web community would contain “bipartite cores”.

51-1

© 2005 by Chapman & Hall/CRC

51-2

Handbook of Data Structures and Applications

Bipartite cores, as the name suggests, are complete bipartite graphs corresponding to the hubs and authorities around which the communities are supposed to have developed. Experimental investigations of the structure of the web graph, taking place on the graphs extracted out of the partial crawls, has conﬁrmed much of the above and more. The structural understanding resulting from the experimental investigations has fueled both, theoretical model building which attempts to explain experimentally observed phenomena, and development of new algorithmic techniques that solve traditional problems of search and information retrieval on the web graph in novel ways. Moreover, the reality of the Web as a structure which is too large and continuously changing, makes the standard oﬀ-line and on-line models for algorithm design totally inapplicable. Over the last seven-eight years researchers have attempted to grapple with these unique issues of complexity in the study of the Web. Interestingly, contributions to this study of the Web have come not only from from computer scientists, but also from physicists who have brought to Web model building techniques from statistical mechanics that have been successful in predicting macro level behavior of a variety of natural phenomenon from millions of its constituent parts. In this chapter an attempt is made to put together what to the author are the main strands of this rapidly evolving model building. The rest of the chapter is organized as follows: Section 2 surveys the experimental observations and reﬂects what are the major trends in the ﬁndings. Section 3 contains the basic theoretical framework developed to explain the experimental ﬁndings. Section 4 contains examples of web algorithmics. Section 5 is crystal gazing and reﬂects what to the author are the grand challenges.

51.2

Experimental Observations

Recent literature contains reports of a number of experiments conducted to investigate topological properties satisﬁed by the web graph [6, 9, 22]. These experiments were conducted over a period of time, and using Web samples of varying sizes. Albert, Jeong and Barabasi [6] used nd.edu subset of the Web. Kumar et al.[22] used a cleaned up version of a 1997 web crawl carried out by Alexa Inc. Broder et al. [9] based their measurements on an Altavista crawl having about 200 million pages and 1.5 billion hyperlinks. The most fundamental observation that emerges from these experiments conducted at diﬀerent times, focusing on diﬀerent subparts of the Web, is that the degree distribution of nodes in the web graph follows a power law. The degree distribution is said to satisfy power law if the fraction of nodes of degree x is proportional to x−α for α > 0. Power law distribution is observed for both the indegrees and the outdegrees of the web graph. Broder at al. report that for indegrees the power coeﬃcient —indexexperimental observations!indegree distributionα ≈ 2.1, and for outdegrees α ≈ 2.72. There is a very close match in literature in the value of α for indegree distribution. For outdegree distribution the value of α reported varies from 2.4 to 2.72 [6]. Broder et al. [9] also analysed the crawl for connectedness. Viewing the web graph as an undirected graph, it was observed that 91% of the nodes were connected to each other and formed a giant connected component. Interestingly, it was found that the distribution of the number of connected components by their sizes also satisﬁed power law (α ≈ 2.5). Power law distribution in the sizes of the components was observed even when the graph was viewed as directed. However, the size of the largest strongly connected component (giant SCC) was only 28% of the total web crawl. The giant SCC was reachable from about 22% of the nodes (the set IN). About similar percentage of nodes were reachable from the giant SCC (the set OUT). A signiﬁcant portion of the rest of the nodes constituted, in Broder et al.’s terminology, “tendrils”, nodes reachable from IN or from which the set OUT

© 2005 by Chapman & Hall/CRC

The Web as a Dynamic Graph

51-3

is reachable. All the experiments done so far point to fractal like self similar nature of the Web in the sense that structure described above is likely to be exhibited in any non-trivial crawl carried out at any time. Kumar et al. [22] also carried out experiments to measure the number of bipartite cores in the Web. In a cleaned up version of the web graph consisting of 24 million nodes, they reported discovering around 135,000 bipartite cliques Ki,j with i ≥ 3 and j = 3. The number of Ki,j ’s with i, j = 3 was approximately 90,000, and the numbers dropped exponentially with increase in j. Finding such cliques in the web graph is an algorithmically challenging problem which we will further discuss in the section on Web algorithmics. Measurements have also been made of the “diameter” of the Web [6, 9]. If the Web has the structure as asserted in [9], then the probability of a path existing between any two random vertices is approximately 24%, and the average shortest path length is 16. Albert et al. [6] measured the average shortest path length on a directed graph generated having in and outdegree distribution satisfying the power law coeﬃcients of 2.1 and 2.45 respectively. In a directed graph with 8 × 108 vertices the average shortest path length was determined to be approximately 19, and was a linear function of the logarithm of the number of vertices. The Web, therefore, is considered to exhibit the “small worlds” phenomenon [31].

51.3

Theoretical Growth Models

This fractal like structure of an evolving graph, whose growth processes are so organised that the degree distribution of its vertices satisfy power law, which has a large number of bipartite cliques as subgraphs, and exhibits the small world phenomenon has generated a lot of interest among computer scientists recently. Part of the reason is that the web graph does not belong to the much studied Gn,p model which consists of all graphs with n vertices having p as the probability that there is an between any two vertices [7]. Graphs in Gn,p are essentially sparse and are unlikely to have many bipartite cliques as subgraphs. Moreover, for large n the degree distribution function is Poisson. There is consensus that the primary reason for the web graph to be diﬀerent from a traditional random graph is that edges in the Web exhibit preferential attachment. Hyperlinks from a new web page are more likely to be directed to popular well established website/webpage just as a new manuscript is more likely to cite papers that are already well cited. It is interesting to note that preferential attachment has been used to model evolving phenomena in ﬁelds ranging from economics [25], biology [32], to languages [33]. Simon [30] used preferential attachment to explain power law distributions already observed in phenomena like distribution of incomes, distribution of species among genera, distribution of word frequencies in documents etc. A modern exposition of Simon’s argument in the framework of its applicability to web graphs is provided by Mitzenmacher [27], and is the basis of Barabasi et al.’s “mean ﬁeld theory” based model [8], as well as the “rate equation” approach of Krapivsky and Redner [20]. All three use continuous diﬀerential equations to model the dynamics of the evolving web graph. This approach is attractive because of its simplicity and the ease with which it enables one to focus on understanding the issues involved, particularly those relating to power law distributions associated with the Web. Let us consider the following growth model (we will call this the basic model) which forms the kernel of most of the reported models in literature. At each time step a new node is added to the web graph. This node gets one edge incident at it from one of the existing nodes in the graph, and has one edge pointing out of it. Let us assume that the tail (the node from which the edge emanates) of the edge which is incident at the node just added is chosen uniformly at random from the existing nodes. The head (the node at

© 2005 by Chapman & Hall/CRC

51-4

Handbook of Data Structures and Applications

which the edge is incident) of the edge which emanates from the node just added is chosen with probability proportional to the indegree of the head in keeping with the preferential attachment paradigm that new web pages tend to attach themselves to popular web pages. We assume, to keep matters simple, that whole process starts with a single node with one edge emanating which is incident at the node itself. Let Ik (t) and Ok (t) denote the number of nodes in the evolved web graph with indegree and outdegree equal to k respectively after t timesteps. Ik (t) and Ok (t) are random variables for all k, t ≥ 1. We will assume for the purposes of what follows that their expected values are concentrated around their means, and we will use Ik (t) and Ok (t) to denote the expected value also. Note that, at time t, one node and two directed edges are added to the graph. The expected increase in the value of Ik (t) is controlled by two processes. One is the expected increase in the value of Ik−1 (t), and the other is the expected decrease in the value of Ik (t). The expected increase is (k − 1)Ik−1 (t)/t. This is because of our assumption that the probability is proportional to the indegree of the head of the node at which the edge emanating from the node just added is incident and t is the total number of nodes in the graph. Reasoning in the same way we get that the expected decrease is kIk (t)/t. Since this change has has taken place over one unit of time we can write ∆(Ik (t)) (k − 1)Ik−1 (t) − kIk (t) = ∆(t) t or, in the continuous domain dIk (t) (k − 1)Ik−1 (t) − kIk (t) = . dt t

(51.1)

We can solve eq. (51.1) for diﬀerent values of k starting with 1. For k = 1 we note that the growth process at each time instance introduces a node of indegree 1. Therefore, eq. (51.1) takes the form dI1 (t) I1 (t) =1− dt t whose solution has the form I1 (t) = i1 t. Substituting this in the above equation we get i1 = 1/2. Working in the same way we can show that I2 (t) = t/6. It is not too diﬃcult to see that Ik (t) are a linear function of t. Therefore, substituting Ik (t) = ik t in eq. (51.1) we get the recurrence equation k−1 ik = ik−1 k+1 whose solution is 1 . (51.2) ik = k(k + 1) What interpretation do we put to the solution Ik (t) = ik t? It essentially means that in the steady state (i.e. t → ∞) the number of of nodes in the graph with indegree k is proportional to ik . Equation (51.2) implies Ik ∼ k −2 , i.e. indegree distribution satisﬁes power law with α = 2. Let us now develop an estimate for Ok . The counterpart of eq. (51.1) in this case is dOk (t) Ok−1 (t) − Ok (t) = . dt t

(51.3)

Assuming that in the steady state Ok (t) = ok t, we can show that o1 = 1/2, and for k > 1 ok =

© 2005 by Chapman & Hall/CRC

ok−1 . 2

The Web as a Dynamic Graph

51-5

This implies Ok ∼ 2−k . That the outdegree distribution is exponential and not power law should not come as a surprise if we recall that the process that aﬀected outdegree was uniform random and had no component of preferential attachment associated with it. It would be instructive to note that very simple changes in the growth model aﬀect the degree distribution functions substantially. Consider the following variation on the growth model analysed above. The edge emanating out of the node added does not just attach itself to another node on the basis of its indegree. With probability β the edge points to a node chosen uniformly at random, and with probability 1 − β the edge is directed to a node chosen proportionally to its indegree. The eq. (51.1 ) now takes the form dIk (t) (βIk−1 (t) + (1 − β)(k − 1)Ik−1 (t)) − (βIk (t) + (1 − β)kIk (t)) = . dt t Note that the ﬁrst term of the ﬁrst part of the r.h.s. corresponds to increase due to the uniform process and the second term increase due to the preferential attachment process. The recurrence equation now takes the form [27] ik (1 + β + k(1 − β)) = ik−1 (β + (k − 1)(1 − β)) or,

ik 2−β = 1− ik−1 1 + β + k(1 − β) ∼1−(

2−β 1 )( ) 1−β k

for large k. It can be veriﬁed by substitution that 2−β

ik ∼ k − 1−β

(51.4)

satisﬁes the above recurrence. It should be noted that in this case the power law coeﬃcient can be any number larger than 2 depending upon the value of β. How do we get power law distribution in the outdegree of the nodes of the graph? Simplest modiﬁcation to the basic model to ensure that would be to choose the tail of the edge incident at the added node to be chosen with probability proportional to the outdegree of the nodes. Aiello et al. [4], and Cooper and Frieze [13] have both given analysis of the version of the basic model in which, at any time epoch, apart from edges incident and emanating out of the added node being chosen randomly and according to the out and in degree distributions of the existing nodes, edges are added between existing nodes of the graph. Both in and out degree distributions show power law behaviour. From Web modeling perspective this is not particularly satisfying because there is no natural analogue of preferential attachment to explain the process that controls the number of hyperlinks in a web page. Never-the-less all models that enable power law distribution in outdegree of nodes in literature resort to it in one form or the other. We will now summarize the other signiﬁcant variations of the basic model that have been reported in literature. Kumar et al. [21] categorise evolutionary web graph models according to the rate of growth enabled by them. Linear growth models allow one node to be added at one time epoch along with a ﬁxed number of edges to the nodes already in the graph. Exponential growth models allow the graph to grow by a ﬁxed fraction of the current size at each time epoch. The models discussed above are linear growth models. Kumar et al. in [21] introduce the notion of copying in which the head of the edge emanating out of the added node is chosen to be the head of an edge emanating out of a “designated” node (chosen randomly).

© 2005 by Chapman & Hall/CRC

51-6

Handbook of Data Structures and Applications

The intuition for copying is derived from the insight that links out of a new page are more likely to be directed to pages that deal with the “topic” associated with the page. The designated node represents the choice of the topic and the links out of it are very likely links to “other” pages relating to the topic. Copying from the designated node is done with probability 1 − β. With probability β the head is chosen uniformly at random. The exponential growth model that they have analyzed does not involve the copying rule for distribution of the new edges to be added. The tail of a new edge is chosen to be among the new nodes with some probability factor. If the tail is to be among the old nodes, then the old node is chosen with probability proportional to its out degree. The analysis, as in [4, 13], is carried out totally within the discrete domain using martingale theory to establish that the expected values are sharply clustered. For the linear growth model the power law coeﬃcient is the same as in eq. (51.4). The copying model is particularly interesting because estimates of the distribution of bipartite cliques in graphs generated using copying match those found experimentally. Another approach that has been used to model evolutionary graphs is the so called Master Equation Approach introduced by Dorogovtsev et al. [16] which focuses on the probability that at time t a node introduced at time i, has degree k. If we denote this quantity by p(k, i, t), then the equation controlling this quantity for indegree in the basic model becomes p(k, i, t + 1) =

k−1 k p(k − 1, i, t) + (1 − )p(k, i, t). t+1 t+1

(51.5)

First term on the r.h.s. corresponds to the probability with which the node increases its indegree. The second term is the complementary probability with which the node remains in its former state. The over all degree distribution of nodes of indegree k in the graph is 1 p(k, i, t). t + 1 i=0 i=t

P (k, t) =

Using this deﬁnition over eq. (51.5) we get (t + 1)P (k, t + 1) = (k − 1)P (k − 1, t) + (t − k)P (k, t). For extremely large networks the stationary form of this equation, i.e. at t → ∞ is P (k) =

k−1 P (k − 1). k+1

(51.6)

Notice that the solution to eq. (51.6) with appropriate initial conditions is of the form P (k) ∼ k −2 which is the same as that obtained by working in the continuous domain. Rigorous analysis of the stochastic processes done so far in [4, 13, 21] has so far taken into account growth, i.e. birth, process only. The combinatorics of a web graph model that involves death processes also has still to be worked out. It must be pointed out that using less rigorous techniques a series of results dealing with issues like non-linear preferential attachment and growth rates, growth rates that change with time (aging and decay), and death processes in the form of edge removals have appeared in literature. This work is primarily being done by physicists. Albert and Barabasi [5], and Dorogovtsev and Mendes [15] are two comprehensive surveys written for physicists which the computer scientists would do well to go through. However, with all this work we are still far away from having a comprehensive model that takes into account all that we understand of the Web. All models view web growth as a global process. But we know that a web page to propagate Esperanto in India is more likely to have hyperlinks to and from pages of Esperanto enthusiasts in rest

© 2005 by Chapman & Hall/CRC

The Web as a Dynamic Graph

51-7

of the world. From modeling perspective every new node added during the growth process may be associated with the topic of the node chosen, let us say by preferential attachment, to which the added node ﬁrst points to. This immediately reduces the set of nodes from which links can point to it. In eﬀect the probability for links to be added between two nodes which are associated with some topics will be a function of how related the topics are. That there is some underlying structure to the web graph that is deﬁned by the topics associated with the nodes in the graph has been in the modeling horizon for some time. Search engines that use web directories organised hierarchically as graphs and trees of topics have been designed [11]. Experiments to discover the topic related underlying structures have been carried out [10, 12, 18]. A model that takes into account the implicit topic based structure and models web growth as a number of simultaneously taking place local processes [2] is as step in this direction. All that is known about the Web and the models that have been developed so far are pointers to the realisation that development mathematically tractable models that model the phenomena faithfully is a challenging problem which will excite the imagination and the creative energies of researchers for some time.

51.4

Properties of Web Graphs and Web Algorithmics

The properties of web graphs that have been studied analytically are average shortest path lengths between two vertices, size of giant components and their distributions. All these properties have been studied extensively for Gn,p class of random graphs. Seminal work in this area for graphs whose degrees were given was done by Malloy and Reed [23] who came up with a precise condition under which phase transition would take place and giant components as large as the graph itself would start to show up. In what follows we will discuss these issues using generating functions as done by Newman, Strogatz, and Watts [28] primarily because of the simplicity with which these reasonably complex issues can be handled in an integrated framework.

51.4.1

Generating Function Framework

Following [28] we deﬁne for a large undirected graph with N nodes the generating function G0 (x) =

k=∞

pk xk ,

(51.7)

k=0

where pk is the probability that a randomly chosen vertex has degree k. We assume that the probability distribution is correctly normalised, i.e. G0 (1) = 1. G0 (x) can also represent graphs where we know the exact number nk of vertices of degree k by deﬁning k=∞ k k=0 nk x G0 (x) = . k=∞ k=0 nk The denominator is required to ensure that the generating function is properly normalised. Consider the function [G0 (x)]2 . Note that coeﬃcient of the power of xn in [G0 (x)]2 is given by i+j=n pi pj which is nothing but the probability of choosing two vertices such that the sum of their degrees is n. The product of two or more generating functions representing diﬀerent degree distributions can be interpreted in the same way to represent probability distributions reﬂecting independent choices from the two or more distributions involved. Consider the problem of estimating the average degree of a vertex chosen at random. The average degree is given by kp k which is also equal to G0 (1). Interestingly the k

© 2005 by Chapman & Hall/CRC

51-8

Handbook of Data Structures and Applications

average degree of a vertex chosen at random and the average degree of a vertex pointed to by a random edge are diﬀerent. A random edge will point to a vertex with probability proportional to the degree of the vertex which is of the order of kpk . The appropriately normalised distribution is given by the generating function k G (x) k kpk x . (51.8) = x 0 G0 (1) k kpk The generating function given above in eq. (51.8) will have to be divided by x if we wanted to consider the distribution of degree of immediate neighbors excluding the edges by which one reached them. We will denote that generating function by G1 (x). The neighbors of these immediate neighbors are the second neighbors of the original node. The probability that any of the second neighbors connect to any of the immediate neighbors or one another is no more than order of N −1 and hence can be neglected when N is large. Under this assumption the distribution of the second neighbors of the originally randomly chosen node is pk [G1 (x)]k = G0 (G1 (x)). k

The average number of second neighbors, therefore, is z2 = [

d G0 (G1 (x))]x=1 = G0 (1)G1 (1), dx

(51.9)

using the fact that G1 (1) = 1.

51.4.2

Average Path Length

We can extend this reasoning to estimate the distributions for the mth neighbors of a randomly chosen node. The generating function for the distribution for the mth neighbor, denoted by Gm (x), is given by m=1 G0 (x) m G (x) = G(m−1) (G1 (x)) m ≥ 2. Let zm denote the average number of mth nearest neighbors. We have m−1 dGm (x) z2 (m−1) m−1 zm = = G (1)G (1) = [G (1)] z = z1 . 1 1 1 dx z1 x=1

(51.10)

Let l be the smallest integer such that 1+

i=l

zi ≥ N.

i=1

The average shortest path length between two random vertices can be estimated to be of the order l. Using eq. (51.10) we get l∼

log[(N − 1)(z2 − z1 ) + z12 ] − logz12 . log(z2 /z1 )

When N z1 and z2 z1 the above simpliﬁes to l∼

© 2005 by Chapman & Hall/CRC

log(N/z1 ) + 1. log(z2 /z1)

The Web as a Dynamic Graph

51-9

There do exist more rigorous proofs of this result for special classes of random graphs. The most interesting observation made in [28] is that only estimates of nearest and second nearest neighbors are necessary for calculation of average shortest path length, and that making these purely local measurements one can get a fairly good measure of the average shortest distance which is a global property. One, of course, is assuming that the graph is connected or one is limiting the calculation to the giant connected component.

51.4.3

Emergence of Giant Components

Consider the process of choosing a random edge and determining the component(s) of which one of its end nodes is a part. If there are no other edges incident at that node then that node is a component by itself. Otherwise the end node could be connected to one component, or two components and so on. Therefore, the probability of a component attached to the end of a random edge is the sum of the probability of the end node by itself, the end node connected to one other component, or two other components and so on. If H1 (x) is the generating function for the distribution of the sizes of the components which are attached to one of the ends of the edge, then H1 (x) satisﬁes the recursive equation H1 (x) = xG1 (H1 (x)).

(51.11)

Note that each such component is associated with the end of an edge. Therefore, the component associated with a random vertex is a collection of such components associated with the ends of the edges leaving the vertex, and so, H0 (x) the generating function associated with size of the whole component is given by H0 (x) = xG0 (H1 (x)).

(51.12)

We can use eqs. (51.11) and (51.12) to compute the average component size which, in an analogous manner to computing the average degree of a node, is nothing but H0 (1) = 1 + G0 (1)H1 (1).

(51.13)

Similarly using eq. (51.11) we get H1 (1) = 1 + G1 (1)H1 (1), which gives the average component size as 1+

G0 (1) . 1 − G1 (1)

(51.14)

The giant component ﬁrst appears when G1 (1) = 1. This condition is is equivalent to G0 (1) = G0 (1). Using eq. (51.7) the condition implied by eq. (51.15) can also written as k(k − 2)pk = 0.

(51.15)

(51.16)

k

This condition is the same as that obtained by Molloy and Reed in [23]. The sum on the l.h.s. of eq. (51.16) increases monotonically as edges are added to the graph. Therefore, the giant component comes into existence when the sum on the l.h.s. of eq. (51.16) becomes

© 2005 by Chapman & Hall/CRC

51-10

Handbook of Data Structures and Applications

positive. Newman et al. state in [28] that once there is a giant component in the graph, then H0 (x) generates the probability distribution of the sizes of the components excluding the giant component. Molloy and Reed have shown in [24] that the giant component almost surely has cN + o(N ) nodes. It should be remembered that the results in [23, 24, 28] are all for graphs with speciﬁed degree sequences. As such they are applicable to graphs with power law degree distributions. However, web graphs are directed and a model that explains adequately the structure consistent with all that is known experimentally is still to be developed.

51.4.4

Search on Web Graphs

Perhaps the most important algorithmic problem on the Web is mining of data. We will, however, have not much to say about it partly because it has been addressed in Chapter 50, but also because we want to focus on issues that become specially relevant in an evolving web graph. Consider the problem of ﬁnding a path between two nodes in a graph. On the Web this forms the core of the peer to peer (P2P) search problem deﬁned in the context of locating a particular ﬁle on the Web when there is no information available in a global directory about the node on which the ﬁle resides. The basic operation available is to pass messages to neighbors in a totally decentralised manner. Normally a distributed message passing ﬂooding technique on an arbitrary random network would be suspect suspect because of the very large number of messages that may be so generated. Under the assumption that a node knows about the identities of its neighbors and perhaps neighbors’ neighbors, Adamic et al. [1] claim, experimentally through simulations, that in power law graphs with N nodes the average search time is of the order of N 0.79 (graphs are undirected and power law coeﬃcients for the generated graphs is 2.1) when the search is totally random. The intuitive explanation is that even in a random search the search process tends to gravitate towards nodes of high degree. When the strategy is to choose to move to the highest degree neighbor the exponent comes down to 0.70. Adamic et al. [1] have come up a with a fairly simple analysis to explain why random as well as degree directed search algorithms need not have time complexity more than rootic in N (reported exponent is 0.1). In what follows we develop the argument along the lines done by Mehta [26] whose analysis, done assuming that the richest node is selected on the basis of looking at the neighbors and neighbors’ neighbors, has resulted in a much sharper bound than the one in [1]. We will assume that the cut oﬀ degree, m, beyond which the the probability distribution is small enough to be ignored is given by m = N 1/α [3]. Using k −α pk = p(k) = −α k as the probability distribution function, the expected degree z of a random node is m 1−α k dk (α − 1)(m2−α − 1) ∼ ln m, (51.17) z = G0 (1) ≈ 1m −α = (α − 2)(m1−α − 1) dk 1 k under the assumption that α tends to 2 and m1−α is small enough to be ignored. Similarly the PDF for G1 (x) is k 1−α pk k = 1−α = ck 1−α , (51.18) p1 (k) = ( k ) pk k where c=

© 2005 by Chapman & Hall/CRC

1 1 α α−2 ≈ = . = (m2−α − 1) ln m ln N k 1−α

(51.19)

The Web as a Dynamic Graph

51-11

The CDF for G1 (x) using (51.18) and (51.19) is P (x) =

x

p1 (k)dk = 1

ln x . ln m

(51.20)

The search proceeds by choosing at each step the highest degree node among the n neighbors of the current node. The total time taken can be estimated to be the sum of the number of nodes traversed at each step. The number of steps itself can be bounded by noting that the sum of the number of steps at each step can not exceed the size of the graph. Let pmax (x, n) be the distribution of the degree of the richest node (largest degree node) among the n neighbors of a node. Determining the richest node is equivalent to taking the maximum of n independent random variables and in terms of the CDF P (x), ⎧ ⎨ pmax (x, n) =

0 ( P (x) − P (x − 1))n ⎩ 0

x=0 0<x≤m . x>m

(51.21)

This can be approximated as follows pmax (x, n) =

d(P (x)n ) dP (x) = nP (x)n−1 = n(logm x)n−1 cx−1 . dx dx

(51.22)

We can now calculate the expected degree of the richest node among the n nodes as f (n) = E[xmax (n)] =

m

xpmax (x, n) = nc

1

m (logm x)n−1 .

(51.23)

1

Note that if the number of neighbors of every node on the average is z, then the number of second neighbors seen when one is at the current richest node is f (z)(z − 1). this is because one of the neighbors of every other node is the richest node. At the next step, the expected degree of the node whose current degree is f (z) is given by E(f (z)) = f (f (z)) and the number of second neighbors seen at this stage correspondingly is f (f (z))(z − 1). The overlap between two successive computations of neighbors takes place only when there is an edge which makes a node a neighbor as well as the second neighbor. However, the probability of this happening is of the order of N −1 and can be ignored in the limit for large N. Therefore we can assume that at every stage new nodes are scanned and the number of steps, l, is controlled by i=l (z − 1) f i (z) = N. (51.24) i=0

Assuming for the sake of simplicity f (f (z)) = f (z) (simulations indicate that value of f i (z) increases with i and then stabilises) we can set E[n] = n or E(n) = n = nc

m

(logm (x))n−1 ,

1

or n

(ln m) =

m 1

© 2005 by Chapman & Hall/CRC

n−1

(ln x)

∼

m

(ln x)n−1 dx. 1

(51.25)

51-12

Handbook of Data Structures and Applications

Substituting et for x we get (ln m)n

ln m

et tn−1 dt

= 1

ln m

∼

tn−1 (1 + 1

∞ i t 0

i!

)dt

=

∞ ln m (ln m)n tn+i + n i!(n + i) 0

≤

(ln m)n ln m (ln m)n + e , n n+c

0

where c is a constant. The above implies 1=

m 1 + , n n+c

which gives n = O(m). Substituting this in eq. (51.24) we get (ln m − 1)

l

O(m) = N,

0

or l∼

N N 1−1/α = . m ln m ln m

Taking α to be 2.1 the number of steps would be of the order of N 0.52 / ln m. Mehta [26] also reports results of simulations carried out on graphs generated with α equal to 2.1 using the method given in [3]. The simulations were carried out on the giant components. He reports the number of steps to be growing proportional to N 0.34 . The simulation results are very preliminary as the giant components were not very large (largest was of the order of 20 thousand nodes).

51.4.5

Crawling and Trawling

Crawling can be looked upon as a process where an agent moves along the nodes and edges of a randomly evolving graph. Oﬀ-line versions of the Web which are the basis of much of what is known experimentally about the Web have been obtained essentially through this process. Cooper and Frieze [14] have attempted to study the expected performance of a crawl process where the agent makes a ﬁxed number of moves between the two successive time steps involving addition of nodes and edges to the graph. The results are fairly pessimistic. Expected proportion of unvisited nodes is of order of 0.57 of the graph size when the edges are added uniformly at random. The situation is even worse when the edges are distributed in proportion to the degree of nodes. The proportion of the unvisited vertices increases to 0.59. Trawling, on the other hand, involves analyzing the web graph obtained through a crawl for subgraphs which satisfy some particular structure. Since the web graph representation may run into Tera bytes of data, the traditional random access model for computing the

© 2005 by Chapman & Hall/CRC

The Web as a Dynamic Graph

51-13

algorithmic complexity looses relevance. Even the standard external memory models may not apply as data may be on tapes and may not ﬁt totally on the disks available. In these environments it may even be of interest to develop algorithms where the ﬁgure of merit may be the number of passes made over the graph represented on tape [29]. In any case the issue in trawling is to design algorithms that eﬃciently stream data between secondary and main memory. Kumar et al. discuss in [22] the design of trawling algorithms to determine bipartite cores in web graphs. We will focus only on the core issue here which is that the size of the web graph is huge in comparison to the cores that are to be detected. This requires pruning of the web graph before algorithms for core detection are run. If (i, j) cores (i represents outdegree and j indegree) have to be detected then all nodes with outdegree less than i and indegree less than j have to be pruned out. This can be done with repeated sorting of the web graph by in and out degrees and keeping track of only those nodes that satisfy the pruning criteria. If an index is kept in memory of all the pruned in vertices then repeated sorting may also be avoided. The other pruning strategy discussed in [22] is the so called inclusion exclusion pruning in which the focus at every step is to either discover an (i, j) core or exclude a node from further contention. Consider a node x with outdegree equal to i (these will be termed fans) and let Γ(x) be the set of nodes that are potentially those with which x could form an (i, j) core (called centers). An (i, j) core will be formed if and only if there are i − 1 other nodes all pointing to each node in Γ(x). While this condition is easy to check if there are two indices in memory, the whole process can be done in two passes. In the ﬁrst identify all the fans with outdegree i. Output for each such fan the set of i centers adjacent to it. In the second pass use an index on the destination id to generate the set of fans pointing to each of the i centers and compute the intersection of these sets. Kumar et al. [22] mention that this process can be batched with index only being maintained of the centers that result out of the fan pruning process. If we maintain the set of fans corresponding to the centers that have been indexed, then using the dual condition that x is a part of the core if and only if the intersection of the sets Γ−1 (x) has size at least j. If this process results in identiﬁcation of a core then a core is outputted other wise the node x is pruned out. Kumar et al. [22] claim that this process does not result in any not yet identiﬁed cores to be eliminated. The area of trawling is in its infancy and techniques that will be developed will depend primarily on the structural properties being discovered. It is likely to be inﬂuenced by the underlying web model and the whether any semantic information is also used in deﬁning the structure. This semantic information may be inferred by structural analysis or may be available in some other way. Development of future web models will depend largely on our understanding of the web, and they themselves will inﬂuence the algorithmic techniques developed.

51.5

Conclusions

The modeling and analysis of web as a dynamic graph is very much in its infancy. Continuous mathematical models, which has been the focus of this write up provides good intuitive understanding at the expense of rigour. Discrete combinatorial models that do not brush the problems of proving concentration bounds under the rug are available for very simple growth models. These growth models do not incorporate death processes, or the issues relating to aging (newly created pages are more likely to be involved in link generation processes) or for that matter that in and out degree distributions on the web are not independent and may depend upon the underlying community structure. The process

© 2005 by Chapman & Hall/CRC

51-14

Handbook of Data Structures and Applications

of crawling which can visit only those vertices that have at least one edge pointing to it gives a very limited understanding of degree distributions. There are reasons to believe that a signiﬁcantly large number of pages on the web have only out hyperlinks. All this calls for extensive experimental investigations and development of mathematical models that are tractable and help both in development of new analytical as well as algorithmic techniques. The author would like to acknowledge Amit Agarwal who provided a willing sounding board and whose insights have signiﬁcantly inﬂuenced the author’s approach on these issues.

References [1] L. A. Adamic, R. M. Lukose, A. R. Puniyani, and B. A. Huberman. Search in Power Law Networks. Physical Review E. 64:46135-46143, 2001. [2] A. Agarwal, S. N. Maheshwari, B. Mehta. An Evolutionary web graph Model. Technical Report, Department of Computer Science and Engineering, IIT Delhi, 2002. [3] W. Aiello, F. Chung, and L. Lu. A Random Graph Model for Massive Graphs. In Proceedings of the 32nd Annual ACM Symposium on Theory of Computing. 2000. [4] W. Aiello, F. Chung, and L. Lu. Random Evolution in Massive Graphs. In Handbook on Massive Data Sets, (Eds. J. Abello et al.) [5] R. Albert, and A. L. Barabasi. Statistical Mechanics of Complex Networks. condmat/0106096. [6] R. Albert, H. Jeong, and A. L. Barabasi. Diameter of the World Wide Web. Nature 401:130-131, 1999. [7] B. Bollobas. Modern Graph Theory. Springer-Verlag, New York, 1998. [8] A. L. Barabasi, R. Albert, and H. Jeong. Mean Field Theory for Scale-free Random Networks. Physica A. 272:173-189, 1999. [9] A. Broder, R. Kumar, F. Maghoul, P. Raghavan, S. Rajagopalan, R. Stata, A. Tomkins, and J. Wiener. Graph Structure in the Web: Experiments and Models. In Proceedings of the 9th World Wide Web Conference, 2000. [10] S. Chakrabarti, M. M. Joshi, K. Punera, and D. V. Pennock. The Structure of Broad Topics on the Web. In Proceedings of the 11th World Wide Web Conference, 2002. [11] S. Chakrabarti, M. Van den Berg, and B. Dom. A New Approach to Topic Speciﬁc Web Resource Discovery. In Proceedings of the 8th World Wide Web Conference, 1999. [12] C. Chekuri, M. Goldwasser, P. Rahgavan, E. Upfal. Web Search using Automatic Classiﬁcation. In Proceedings of the 6th World Wide Web Conference, 1997. [13] C. Cooper, and A. Frieze. A General model of Web Graphs. In Proceedings of the 9th Annual European Symposium on Algorithms, 2001. [14] C. Cooper, and A. Frieze. Crawling on Web Graphs. In Proceedings of the 43rd Annual Symposium on Theory of Computing, 2002. [15] S. N. Dorogovtsev, and J. F. F. Mendes. Evolution of Networks. cond-mat/0106144. [16] S. N. Dorogovtsev, J. F. F. Mendes, and A. N. Samukhin. Structure of Growing Networks with Preferential Linking. Phys. Rev. Lett. 85:4633, 2000. [17] L. Egghe, and R. Rousseau. Introduction to Infometrics : Quantitative Methods in Library, Documentation and Information Science. Elsevier, 1990. [18] D. Gibson, J. Kleinberg, and P. Raghavan. Inferring Web Communities from Link Topology. In Proceedings of the 9th ACM Conference on Hypertyext and Hypermedia, 1998. [19] J. Kleinberg. Authoritative Sources in a Hyperlinked Environment. Journal of the ACM, 2000. [20] P. L. Krapivsky, and S. Redner. Organisation of Growing Random Networks. Physical

© 2005 by Chapman & Hall/CRC

The Web as a Dynamic Graph

51-15

Review E. 63:066123001-066123014, 2001. [21] R. Kumar, P. Raghavan, S. Rajagopalan, D. Sivakumar, A. Tomkins, and E. Upfal. Stochastic Models for the web graph. In Proceedings of the 41st Annual Symposium on Foundations of Computer Science, 2000. [22] R. Kumar, P. Raghavan, S. Rajagopalan, and A. Tomkins. Trawling Emerging Cybercommunities Automatically. In Proceedings of the 8th World Wide Web Conference, 1999. [23] M. Malloy, and B. Reed. A Critical Point for Random Graphs with a given Degree Sequence. Random Structures and Algorithms. 6:161-179, 1995. [24] M. Malloy, and B. Reed. The Size of a Giant Component of a Random Graph with a given Degree Sequence. Combinatorics Probability and Computing. 7:295-305, 1998. [25] B. Mandelbrot. Fractals and Scaling in Finance. Springer-Verlag, 1997. [26] B. Mehta. Search in web graphs. M. Tech. Thesis, Department of Computer Science and Engineering I.I.T. Delhi, 2002. [27] M. Mitzenmacher. A Brief History of Generative Models for Power Law and Lognormal Distributions. To appear in Internet Mathematics. [28] M. E. J. Newman, S.H. Strogatz, and D.J. Watts. Random Graphs with Arbitrary Degree Distribution and their Applications. Physical Review E. [29] S. Rajagopalan. Private Communication. [30] H. A. Simon. On a Class of Skew Distribution Functions. Biometrika. 42:425-440, 1955. [31] D. J. Watts. Small Worlds: The Dynamics of Networks between Order and Randomness. Princeton University Press, 1999. [32] G. U. Yule. A Mathematical Theory of Evolution based on the Conclusions of Dr J.C. Willis, F.R.S. Philosophical Transaction of the Royal Society of London (Series B), 213:21-87, 1925. [33] G. K. Zipf. Selective Studies and the Principle of Relative Frequency in Language. Harvard University Press, 1932.

© 2005 by Chapman & Hall/CRC

52 Layout Data Structures 52.1 52.2 52.3 52.4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VLSI Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Layout Data Structures: an Overview . . . . . . . . . . Corner Stitching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

52-1 52-1 52-4 52-4

Point Finding • Tile Insertion • Storage Requirements of the Corner Stitching Data Structure

52.5

Corner Stitching Extensions . . . . . . . . . . . . . . . . . . . . . . Expanded Rectangles • Trapezoidal Tiles Tiles • L-shaped Tiles

52.6

52.1

52-8

Curved

Quad Trees and Variants . . . . . . . . . . . . . . . . . . . . . . . . . . 52-12 Bisector List Quad Trees • k -d Trees • Multiple Storage Quad Trees • Quad List Quad Trees • Bounded Quad Trees • HV Trees • Hinted Quad Trees

Dinesh P. Mehta Colorado School of Mines

•

52.7

Concluding Remarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-18

Introduction

VLSI (Very Large Scale Integration) is a technology that has enabled the manufacture of large circuits in silicon. It is not uncommon to have circuits containing millions of transistors, and this quantity continues to increase very rapidly. Designing a VLSI circuit is itself a very complex task and has spawned the area of VLSI design automation. The purpose of VLSI design automation is to develop software that is used to design VLSI circuits. The VLSI design process is suﬃciently complex that it consists of the four steps shown in Figure 52.1. Architectural design is carried out by expert human engineers with some assistance from tools such as simulators. Logic design is concerned with the boolean logic required to implement a circuit. Physical design is concerned with the implementation of logic on a three dimensional physical structure: the VLSI chip. VLSI physical design consists of steps such as ﬂoorplanning, partitioning, placement, routing, circuit extraction, etc. Details about VLSI physical design automation may be found in [1–3]. Chapter 53 describes the rich area of data structures for ﬂoorplanning. In this chapter, our concern will be with the representation of a circuit in its “physical” form. In order to proceed with this endeavor, it is necessary to ﬁrst understand the basics of VLSI technology.

52.2

VLSI Technology

We begin with the caveat that our presentation here only seeks to convey the basics of VLSI technology. Detailed knowledge about this area may be obtained from texts such as [4]. The

52-1

© 2005 by Chapman & Hall/CRC

52-2

Handbook of Data Structures and Applications CONCEPT Architectural Design Logical Design Physical Design Fabrication CHIP

FIGURE 52.1: The VLSI Design stages. transistor is the fundamental device in VLSI technology and may be viewed as a switch. It consists of a gate, a source, and a drain. The voltage on the gate controls the passage of current between the source and the drain. Thus, the gate can be used to switch the transistor “on” (current ﬂows between the source and the drain) and “oﬀ” (no current ﬂows). Basic logic elements such as the inverter (the NOT gate), the NAND gate, and the NOR gate are built using transistors. Transistors and logic gates can be manufactured in layers on a silicon disk called a wafer. Pure silicon is a semiconductor whose electrical resistance is between that of a conductor and an insulator. Its conductivity can be signiﬁcantly improved by introducing “impurities” called dopants. N-type dopants such as phosphorus supply free electrons, while p-type dopants like boron supply holes. Dopants are diﬀused into the silicon wafer. This layer of the chip is called the diﬀusion layer and is further classiﬁed into n-type and p-type depending on the type of dopant used. The source and drain of a transistor are formed by separating two n-type regions with a p-type region (or vice versa). A gate is formed by sandwiching a silicon dioxide (an insulator) layer between the p-type region and a layer of polycrystalline silicon (a conductor). Figure 52.2 illustrates these concepts. Since polycrystalline silicon (poly) is a conductor, it is also used for short interconnections gate source

drain polycrystalline silicon

1 0

1 0

1 0

silicon dioxide

n n p−doped silicon

FIGURE 52.2: A transistor. (wires). Up to this point, we have described the two layers (diﬀ and poly) that are used to make all electronic devices. Although poly conducts electricity, it is not suﬃcient to complete all the interconnections using one layer. Modern chips usually have several layers of aluminum (“metal”), a conductor, separated from each other by insulators on top of the poly layer. These make it possible for the gates to be interconnected as speciﬁed in

© 2005 by Chapman & Hall/CRC

Layout Data Structures

52-3

the design. Note that a layer of material X (e.g., poly) does not mean that there is a monolithic slab of poly over the entire chip area. The poly is only deposited where gates or wires are needed. The remaining areas are ﬁlled with insulating materials and for our purposes may be viewed as being empty. In addition to the layers as described above, it is necessary to have a mechanism for signals to pass between layers. This is achieved by contacts (to connect poly with diﬀusion or metal) and vias (to connect metal on diﬀerent layers). Figure 52.3 shows the layout and a schematic of an nMOS inverter. We brieﬂy describe the functioning of the inverter. If the input gate voltage is “0”, the transistor is switched oﬀ and there is no connection between the ground signal and the output. The voltage at the output is identical to that of the power source, which is a “1”. If the gate is at “1”, the transistor is switched on and there is a connection between the ground signal “0” and the output, making the output “0”. power supply

implant

buried contact

metal

11 00 00 11 00 11 11 00

poly diff output

input metal−diffusion contact

111 000 111 000

00 nMOS transistor 11 11 00 input ground

"1"(VDD) R output

"0"(GND)

FIGURE 52.3: An inverter.

The purpose of a layout data structure is to store and manipulate the rectangles on each layer. Some important high-level operations that a layout data structure must support are design-rule checking, layout compaction, and parasitic extraction. Design Rule Checking (DRC): Design rules are the interface between the circuit designer and the process engineer. They specify geometric constraints on the layout so that the patterns on the processed wafer preserve the topology of the designs. An example of a design rule is that the width of a wire must be greater than a speciﬁed minimum. If this constraint is violated, it is possible that for the wire to be discontinuous because of errors in the fabrication process. Similarly, if two wires are placed too close to each other, they could touch each other. The DRC step veriﬁes that all design rules have been met. Additional design rules for CMOS technology may be found in [4, page 142] Parasitic Extraction: Each layer of the chip has a resistance and a capacitance that are critical to the estimation of circuit performance. Inductance is usually less important on the chip, but has greater impact on the I/O components of the chip. Capacitance, resistance, and inductance are commonly referred to as “parasitics”. After a layout has been created, the parasitics must be computed in order to verify that the circuit will meet its performance

© 2005 by Chapman & Hall/CRC

52-4

Handbook of Data Structures and Applications

goals. (Performance is usually measured by clock cycle times and power dissipation.) The parasitics are computed from the geometry of the layout. For example, the resistance of a ρl rectangular slab of metal is tw , where ρ is the resistivity of the metal and l, w, and t are the slab’s length, width, and thickness, respectively. See [4, Chapter 4] for more examples. Compaction: The compaction step, as its name suggests, tries to make the layout as small as possible without violating any design rules. This reduces the area of the chip, which could result in more chips being manufactured from a single wafer, which signiﬁcantly reduces cost per chip. Interestingly, the cost of a chip could grow as a power of ﬁve of its area [5] making it imperative that area be minimized! Two-dimensional compaction is NPhard, but one-dimensional compaction can be carried out in polynomial time. Heuristics for 2D compaction often iteratively interleave one-dimensional compactions in the x- and y-directions. For more details, see [6].

52.3

Layout Data Structures: an Overview

There are two types of layout data structures that are based on diﬀering philosophies. The ﬁrst is in the context of a layout editor. Here, the idea is that a user manually designs the layout, for example, by inserting rectangles of the appropriate dimensions at the appropriate layer. This customized approach is used for library cells. The MAGIC system [7] developed at U.C. Berkeley is an example of of a system that included a layout editor. MAGIC was in the public domain and was used to support classes on VLSI design in many universities. The layout editor context is especially important here because it permitted the developers of MAGIC to assume locality of reference; i.e., a user is likely to perform several editing operations in the same area of the layout over a short period of time. The second philosophy is that the layout process is completely automated. This has the advantage that some userinteraction operations do not need to be supported and run time is critical. This approach is more common in industrial software, where automatic translation techniques convert electronic circuits into physical layouts. This philosophy is supported by the quad-tree and variants that were designed speciﬁcally for VLSI layout.

52.4

Corner Stitching

The corner stitching data structure was proposed by Ousterhout [8] to store non-overlapping rectilinear circuit components in MAGIC. The data structure is obtained by partitioning the layout area into horizontally maximal rectangular tiles. There are two types of tiles: solid and vacant, both of which are explicitly stored in the corner-stitching data structure. Tiles are obtained by extending horizontal lines from corners of all solid tiles until another solid tile or a boundary of the layout region is encountered. The set of solid and vacant tiles so obtained is unique for a given input. The partitioning scheme ensures that no two vacant or solid tiles share a vertical side. Each tile T is stored as a node which contains the coordinates of its bottom left corner, x1 and y1 , and four pointers N , E, W , and S. N (respectively, E, W , S) points to the rightmost (respectively, topmost, bottommost, leftmost) tile neighboring its north (respectively, east, west, south) boundary. The x and y coordinates of the top right corner of T are T.E → x1 and T.N → y1 , respectively, and are easily obtained in O(1) time. Figure 52.4 illustrates the corner stitching data structure. The corner stitching data structure supports a rich set of operations. 1. Point Finding: given a tile T and a point p(x, y), search for the tile containing p by following a sequence of stitches starting at T .

© 2005 by Chapman & Hall/CRC

Layout Data Structures

52-5

B

A

C N

D

W

T

E

E

S

FIGURE 52.4: The corner stitching data structure. Pointers (stitches) are shown for tile T. 2. Neighbor Finding: ﬁnd all solid and vacant tiles that abut a given tile T . 3. Area Searches: determine whether any solid tiles intersect a given rectangular area R. This operation is used to determine whether a new solid tile can subsequently be inserted into area R. (Recall that tiles in a layer are not permitted to overlap.) 4. Directed Area Enumeration: enumerate all the tiles contained in a given rectangular area in a speciﬁed order. This is used during the compaction operation which may require tiles to be visited and compacted in a left-to-right order. 5. Tile Creation: insert a solid tile T into the data structure at a speciﬁed location. 6. Tile Deletion: delete a speciﬁed solid tile T from the data structure. 7. Plowing: translate a large piece of a design. Move other pieces of the design that lie in its path in the same direction. 8. Compaction: this refers to one-dimensional compaction. We describe two operations to illustrate corner stitching:

52.4.1

Point Finding

Next, we focus on the point ﬁnd operation because of its eﬀect on the performance of corner stitching. The algorithm is presented below. Given a pointer to an arbitrary tile T in the layout, the algorithm seeks the tile in the layout containing the point P . Tile Point Find (Tile T , Point P ) 1. begin 2. current = T ; 3. while (P is not contained in current) 4 begin 5. while (P.y does not lie in current’s y-range) 6. if (P.y is above current) current = current→ N ; 7. else current = current→ S; 8. while (P.x does not lie in current’s x-range) 9. if (P.x is to the right of current) current = current→ E; 10. else current = current→ W ;

© 2005 by Chapman & Hall/CRC

52-6

Handbook of Data Structures and Applications

11. end 12. return (current); 13. end

Figure 52.5 illustrates the execution of the point ﬁnd operation on a pathological example. From the start tile T , the while loop of line 5 follows north pointers until tile A is reached. We change directions at tile A since its y-range contains P . Next, west pointers are followed until tile F is reached (whose x-range contains P ). Notice that the sequence of west moves causes the algorithm to descend in the layout resulting in a vertical position that is similar to that of the start tile! As a result of this misalignment, the outer while loop of the algorithm must execute repeatedly until the point is found (note that the point will eventually be found since the point ﬁnd algorithm is guaranteed to converge).

A

B C D E

F Start

FIGURE 52.5: Illustration of point ﬁnd operation and misalignment.

52.4.2

Tile Insertion

This operation creates a new solid tile and inserts it into the layout. It accomplishes this by a sequence of split and merge operations. The split operation breaks a tile into two tiles along either a vertical or a horizontal line. The merge operation combines two tiles to form a rectangular tile. Algorithm Insert discusses the insertion of a rectangle into the layout. Insert(A) // (x1 , y1 ) and (x2 , y2 ) are the bottom left and top right corners of A. 1. if (!AreaSearch(A)) return; //area is not empty, abort. 2. Let i = 0; Split Qi , the tile containing the north edge of A into two tiles along the line y = y2 ; Let T be the upper tile and Qi be the lower tile. 3. while (Qi does not contain the south edge of A)

© 2005 by Chapman & Hall/CRC

Layout Data Structures

52-7

(a) Split Qi vertically into three tiles along x = x1 and x = x2 ; let the resulting tiles from left to right be Li , Qi , and Ri . (b) if (i > 0) i. Merge Ri−1 and Li−1 into Ri and Li , respectively, if possible. ii. Merge Qi−1 into Qi ; (c) Let Qi+1 be the tile beneath Qi . (d) Increment i; 4. Split Qi along y = y1 ; Let Qi be the tile above the split and B the tile below the split; Split Qi into Li , Qi , and Ri using the lines x = x1 and x = x2 ; 5. Merge Qi and Qi−1 to get Qi . Qi is the newly inserted solid tile; 6. Merge Ri−1 , Li−1 with neighboring tiles; if Ri (Li ) gets merged, the merged tile is called Ri (Li ). Merge Ri and Li with neighboring tiles;

Figure 52.6 shows the various steps involved in the insertion algorithm.

Q0

L0 Q1

(a)

L1 Q2

T Q0

R0

(b)

T Q1

T R0

R0

L1

R1

Q2

L2

R2 Q3

(c)

(d)

T

T R0

L1 L3

Q3

R2

R0

L1 R2

L3 R3

R3

B (e)

B (f)

FIGURE 52.6: Illustration of insertion.

© 2005 by Chapman & Hall/CRC

52-8

Handbook of Data Structures and Applications

The rectangle A to be inserted is represented by thick, dashed lines in Figure 52.6(a). The coordinates of the bottom left and top right corners of A are (x1 , y1 ) and (x2 , y2 ), respectively. First, Step 1 of the algorithm uses AreaSearch to ensure that no solid tiles intersect A. Step 2 identiﬁes tile Q0 as the vacant tile containing A’s north edge and splits it by the horizontal line y = y2 into two tiles: T above the split-line and Q0 below the split-line. Next, in the while loop of Step 3, Q0 is split by vertical lines at x1 and x2 to form L0 , Q0 , R0 . Tile Q1 is the vacant tile below Q0 . The resulting conﬁguration is shown in Figure 52.6(b). In the next iteration, Q1 is split to form L1 , Q1 , and R1 . L0 merges into L1 and Q0 merges into Q1 . Tile Q2 is the vacant tile below Q1 . The resulting conﬁguration is shown in Figure 52.6(c). Next, Q2 is split to form L2 , Q2 , and R2 . R1 is merged into R2 and Q1 merged into Q2 . Figure 52.6(d) shows the conﬁguration after Tile Q2 is processed. The vacant tile Q3 below Q2 contains R’s bottom edge and the while loop of Step 3 is exited. Steps 4, 5, and 6 of the algorithm result in the conﬁguration of Figure 52.6(e). The ﬁnal layout is shown in Figure 52.6(f).

52.4.3

Storage Requirements of the Corner Stitching Data Structure

Unlike simpler data structures such as arrays and linked lists, it is not trivial to manually estimate the storage requirements of a corner stitched layout. For example, if n items are inserted into a linked list, then the amount of storage required is n multiplied by the number of bytes required by a single list node. Because of vacant tiles, the total number of nodes in corner stitching is considerably more than n and depends on the relative positions of the n rectangles. In [9], a general formula for the memory requirements of the corner stitching data structure on a given layout. This formula requires knowledge about certain geometric properties of the layout called violations of the CV property and states that a corner stitching data structure representing a set of N solid, rectangular tiles with k violations contains 3N + 1 − k vacant tiles. Since each rectangular tile requires 28 bytes, the memory requirements are 28(4N + 1 − k) bytes.

52.5

Corner Stitching Extensions

52.5.1

Expanded Rectangles

Expanded rectangles [10] expands solid tiles in the corner stitching data structure so that each tile contains solid material and the empty space around it. No extra tiles are needed to represent empty space. Thus, there are fewer tiles than in corner stitching. However, each tile now requires 44 rather than 28 bytes because additional ﬁelds are needed to store the coordinates of the solid portion of the tile. It was determined that expanded rectangles required less memory than corner stitching when the ratio of vacant to solid tiles in corner stitching was greater than 0.414. Operations on the expanded rectangles data structure are similar to those in corner stitching.

52.5.2

Trapezoidal Tiles

Marple et al [11] developed a layout system called “Tailor” that was similar to MAGIC except that it allowed 45 degree layout. Thus, rectangular tiles were replaced by trapezoidal tiles. There are 9 types of trapezoidal tiles as shown in Figure 52.7. An additional ﬁeld that stores the type of trapezoidal tile is used. The operations on Tailor are similar to those in MAGIC and are implemented in a similar way. It is possible to extend these techniques to arbitrary angles making it possible to describe arbitrary polygonal shapes.

© 2005 by Chapman & Hall/CRC

Layout Data Structures

52-9

FIGURE 52.7: The diﬀerent types of trapezoidal tiles.

52.5.3

Curved Tiles

S´equin and Fa¸canha [12] proposed two generalizations to geometries including circles and arbitrary curved shapes, which arise in microelectromechanical systems (MEMS). As with its corner stitching-based predecessors, the layout area is decomposed in a horizontally maximal fashion into tiles. Consequently, tiles have upper and lower horizontal sides. Their left and right sides are represented by parameterized cubic Bezier curves or by composite paths composed of linear, circular, and spline segments. Strategies for reducing storage by minimizing the number of tiles and curve-sharing among tiles are discussed.

52.5.4

L-shaped Tiles

Mehta and Blust [13] extended Ousterhout’s corner stitching data structure to directly represent L- and other simple rectilinear shapes without partitioning them into rectangles. This results in a data structure that is topologically diﬀerent from the other versions of corner stitching described above. A key property of this L-shaped corner stitching (LCS) data structure is that 1. All vacant tiles are either rectangles or L- shapes. 2. No two vacant tiles in the layout can be merged to form a vacant rectangle or L-shaped tile. Figure 52.8 shows three possible conﬁgurations for the same set of solid tiles. There are four L-shape types (Figure 52.9), one for each orientation of the L-shape. The L-shapes are numbered according to the quadrant represented by the two lines meeting at the single concave corner of the L-shape. Figure 52.10 describes the contents of L-shapes and rectangles in LCS and rectangles in the original rectangular corner stitching (RCS) data structure. The actual memory requirements of a node in bytes (last column of the table) are obtained by assuming that pointers and coordinates, each, require 4 bytes of storage, and by placing all the remaining bits into a single 4-byte word. Note that the space required by any L-shape is less than the space required by two rectangles in RCS and that the space required by a rectangle in LCS is equal to the space required by a rectangle in RCS. The following theorem has been proved in [9]:

© 2005 by Chapman & Hall/CRC

52-10

Handbook of Data Structures and Applications

1

2

(a)

(b)

(c)

FIGURE 52.8: Layouts represented by the L-shaped corner stitching data structure: Layout (c) is invalid because the vacant tiles 1 and 2 can be merged to form an L-shaped tile. Layouts (b) and (c) are both valid, illustrating that unlike RCS, the LCS data structure does not give a unique partition for a given set of solid tiles. xmid Ns

N E

E

N

NW Es

W

W

ymin

ymin S xmin

S xmin

L1

L2

N

N E

E

Ws

ymid

ymid SE

S W

W ymin

xmin ymin

xmid L3

Ss

S xmin

L4

FIGURE 52.9: L-shapes and their pointers.

Tile type L1 L2 L3 L4 R in LCS R in RCS

Number of Coordinates 2 3 4 3 2 2

Number of Pointers 6 5 6 5 4 4

Number of N/E bits 4 3 2 3 2 0

solid/vacant tile bit 1 1 1 1 1 1

R/L bit 1 1 1 1 1 0

L type bits 2 2 2 2 0 0

Number of Bytes 36 36 44 36 28 28

FIGURE 52.10: Space requirements of tiles in LCS and RCS. THEOREM 52.1 The LCS data structure never requires more memory than the RCS data structure for the same set of solid rectangular tiles.

© 2005 by Chapman & Hall/CRC

Layout Data Structures

52-11

Proof Since all solid tiles are rectangles, and since a rectangle occupies 28 bytes in both LCS and RCS, the total memory required to store solid tiles is the same in each data structure. From the deﬁnitions of RCS and LCS, there is a one-to-one correspondence between the set S1 of vacant rectangles in RCS and the set S2 consisting of (i) vacant rectangles in LCS and (ii) rectangles obtained by using a horizontal line to split each vacant L-shape in LCS; where each pair of related rectangles (one from S1 , the other from S2 ) have identical dimensions and positions in the layout. Vacant rectangles in LCS require the same memory as the corresponding vacant rectangles in RCS. However, a vacant L-shape requires less memory than the two corresponding rectangles in RCS. Therefore, if there is at least one vacant L-shape, LCS requires less memory than RCS. THEOREM 52.2 The LCS data structure requires 8.03 to 26.7 % less memory than the RCS data structure for a set of solid, rectangular tiles that satisﬁes the CV property. Rectilinear Polygons

Since, in practice, circuit components can be arbitrary rectilinear polygons, it is necessary to partition them into rectangles to enable them to be stored in the corner stitching format. MAGIC handles this by using horizontal lines to partition the polygons. This is not necessary from a theoretical standpoint, but it simpliﬁes the implementation of the various corner stitching operations. Nahar and Sahni [15] studied this problem and presented an O(n+kv log kv ) algorithm to decompose a polygon with n vertices and kv vertical inversions into rectangles using horizontal cuts only. (The number of vertical inversions of a polygon is deﬁned as the minimum number of changes in vertical direction during a walk around the polygon divided by 2.) The quantity kv was observed to be small for polygons encountered in VLSI mask data. Consequently, the Nahar-Sahni algorithm outperforms an O(n log n) planesweep algorithm on VLSI mask data. We note that this problem is diﬀerent from the problem of decomposing a rectilinear polygon into a minimum number of rectangles using both horizontal and vertical cuts, which has been studied extensively in the literature [16–19]. However, the extension is slower than the original corner stitching, and also harder to implement. Lopez and Mehta [20] presented algorithms for the problem of optimally breaking an arbitrary rectilinear polygon into L-shapes using horizontal cuts. Parallel Corner Stitching

Mehta and Wilson [21] have studied a parallel implementation of corner stitching. Their work focuses on two batched operations (batched insert and delete). Their approach results in a signiﬁcant speed-up in run times for these operations. Comments about Corner Stitching

1. Corner stitching requires rectangles to be non-overlapping. A single layer of the chip consists of non-overlapping rectangles, but all the layers taken together will consist of overlapping rectangles. So, an instance of the corner stitching data structure can only be used for a single layer. However, corner stitching can be used to store multiple layers in the following way: consider two layers A and B. Superimpose the two layers. This can be thought of as a single layer with four types of rectangles: vacant rectangles, type A rectangles, type B rectangles, and type AB rectangles. Unfortunately, this could greatly increase the number of rectangles to be stored. It also makes it harder to perform insertion and deletion operations. Thus, in MAGIC, the

© 2005 by Chapman & Hall/CRC

52-12

Handbook of Data Structures and Applications layout is represented by a number of single-layer corner stitching instances and a few multiple-layer instances when the intersection between rectangles in diﬀerent layers is meaningful; for example, transistors are formed by the intersection of poly and diﬀusion rectangles.

2. Corner stitching is diﬃcult to implement. While the data structure itself is quite elegant, the author’s experience is that its implementation requires one to consider a lot of details that are not considered in a high-level description. This is supported by the following remark attributed to John Ousterhout [12]: Corner-stitching is pretty straightforward at a high level, but it can become much more complicated when you actually sit down to implement things, particularly if you want the implementation to run fast 3. The Point Find operation can be slow. For example, Point Find could visit all the tiles in the √ data structure resulting in an O(n) time complexity. On the average, it requires O( n) time. This is expensive when compared with the O(log n) complexity that may be possible by using a tree type data structure. From a practical standpoint, the slow speed may be tolerable in an interactive environment in which a user performs one operation at a time (e.g., a Point Find could be performed by a mouse button click). Here, a slight diﬀerence in response time might not be noticeable by the user. Furthermore, in an interactive environment, these operations might actually be fast because they take advantage of locality of reference (i.e., the high likelihood that two successive points being searched by a user are near each other in the layout). However, in batch mode, where a number of operations are performed without user involvement, one is more likely to experience the average case complexity (unless the order of operations is chosen carefully so as to take advantage of locality of reference). The diﬀerence in time between corner stitching and a faster logarithmic technique will be signiﬁcant. 4. Corner stitching requires more memory to store vacant tiles.

52.6

Quad Trees and Variants

Quad trees have been considered in Chapters 16 and 19. These chapters demonstrate that there are diﬀerent ﬂavors of quad-trees depending on the type of the data that are to be represented. For example, there are quad trees for regions, points, rectangles, and boundaries. In this chapter, we will be concerned with quad-trees for rectangles. We also note that Chapter 18 describes several data structures that can be used to store rectangles. To the best of my knowledge, the use of these structures has not been reported in the VLSI design automation literature. The underlying principle of the quad tree is to recursively subdivide the two-dimensional layout area into four “quads” until a stopping criterion is satisﬁed. The resulting structure is represented by a tree with a node corresponding to each quad, with the entire layout area represented by the root. A node contains children pointers to the four nodes corresponding the quads formed by the subdivision of the node’s quad. Quads that are not further subdivided are represented by leaves in the quad tree. Ideally, each rectangle is the sole occupant of a leaf node. In general, of course, a rectangle does not ﬁt inside any leaf quad, but rather intersects two or more leaf quads. To state this diﬀerently, it may intersect one or more of the horizontal and vertical lines (called bisectors)

© 2005 by Chapman & Hall/CRC

Layout Data Structures

52-13

used to subdivide the layout region into quads. Three strategies have been considered in the literature as to where in the quad tree these rectangles should be stored. These strategies, which have given rise to a number of quad tree variants, are listed below and are illustrated in Figure 52.11. 1. SMALLEST: Store a rectangle in the smallest quad (not necessarily a leaf quad) that contains it. Such a quad is guaranteed to exist since each rectangle must be contained in the root quad. 2. SINGLE: Store a rectangle in precisely one of the leaf quads that it intersects. 3. MULTIPLE: Store a rectangle in all of the leaf quads that it intersects.

s

r

s

A

B

A

B

t

C

u

r

D1 D2 D3 D4 D1 C

D2 v

v

D3 t

A

u

SMALLEST

D4

B

r

C

A

B

C

t

r

s

t

D1 D2 D3 D4 v

SINGLE

s

D1 D2 D3 D4

u

v

MULTIPLE

u

t

u

s

FIGURE 52.11: Quadtree variations.

Obviously, if there is only one rectangle in a quad, there is no need to further subdivide the quad. However, this is an impractical (and sometimes impossible) stopping criterion. Most of the quad tree variants discussed below have auxiliary stopping criteria. Some subdivide

© 2005 by Chapman & Hall/CRC

52-14

Handbook of Data Structures and Applications

a quad until it reaches a speciﬁed size related to the typical size of a small rectangle. Others stop if the number of rectangles in a quad is less than some threshold value. Figure 52.12 lists and classiﬁes the quad tree variants.

Author Kedem Rosenberg Brown Weyten et al Pitaksanonkul et al Lai et al Lai et al

Abbreviation BLQT k-d MSQT QLQT BQT HV HQT

Year of Publication 1982 1985 1986 1989 1989 1993 1996

Strategy SMALLEST N/A MULTIPLE MULTIPLE SINGLE SMALLEST MULTIPLE

FIGURE 52.12: Summary of Quad-tree variants.

52.6.1

Bisector List Quad Trees

Bisector List Quad Trees (BLQT) [22], which was the ﬁrst quad-tree structure proposed for VLSI layouts, used the SMALLEST strategy. Here, a rectangle is associated with the smallest quad (leaf or non-leaf) that contains it. Any non-leaf quad Q is subdivided into four quads by a vertical bisector and a horizontal bisector. Any rectangle associated with this quad must intersect one or both of the bisectors (otherwise, it is contained in one of Q’s children, and should not be associated with Q). The set of rectangles are partitioned into two sets: V , which consists of rectangles that intersect the vertical bisector and H, which consists of rectangles that intersect the horizontal bisector. Rectangles that intersect both bisectors are arbitrarily assigned to one of V and H. These “lists” were actually implemented using binary trees. The rationale was that since most rectangles in IC layouts were small and uniformly distributed, most rectangles will be at leaf quads. A region search operation identiﬁes all the quads that intersect a query window and checks all the rectangles in each of these quads for intersection with the query window. The BLQT (which is also called the MX-CIF quadtree) is also described in Chapter 16.

52.6.2

k -d Trees

Rosenberg [23] compared BLQT with k-d trees and showed experimentally that k-d trees outperformed an implementation of BLQT. Rosenberg’s implementation of the BLQT diﬀers from the original in that linked lists rather than binary trees were used to represent bisector lists. It is hard to evaluate the impact of this on the experimental results, which showed that point-ﬁnd and region-search queries visit fewer nodes when the k-d tree is used instead of BLQT. The experiments also show that k-d trees consume about 60-80% more space than BLQTs.

52.6.3

Multiple Storage Quad Trees

In 1986, Brown proposed a variation [24] called Multiple Storage Quad Trees (MSQT). Each rectangle is stored in every leaf quad it intersects. (See the quad tree labeled “MULTIPLE” in Figure 52.11.) An obvious disadvantage of this approach is that it results in wasted space.

© 2005 by Chapman & Hall/CRC

Layout Data Structures

52-15

This is partly remedied by only storing a rectangle once and having all of the leaf quads that it intersects contain a pointer to the rectangle. Another problem with this approach is that queries such as Region Search may report the same rectangle more than once. This is addressed by marking a rectangle when it is reported for the ﬁrst time and by not reporting rectangles that have been previously marked. At the end of the Region Search operation, all marked rectangles need to be unmarked in preparation for the next query. Experiments on VLSI mask data were used to evaluate MSQT for diﬀerent threshold values and for diﬀerent Region Search queries. A large threshold value results in longer lists of pointers in the leaf quads that have to be searched. On the other hand, a small threshold value results in a quad-tree with greater height and more leaf nodes as quads have to be subdivided more before they meet the stopping criterion. Consequently, a rectangle now intersects and must be pointed at by more leaf nodes. A Region Search query with a small query rectangle (window) beneﬁts from a smaller threshold because it has to search smaller lists in a handful of leaf quads. A large window beneﬁts from a higher threshold value because it has to search fewer quads and encounters fewer duplicates.

52.6.4

Quad List Quad Trees

In 1989, Weyten and De Pauw [25] proposed a more eﬃcient implementation of MSQT called Quad List Quad Trees (QLQT). For Region Searches, experiments on VLSI data showed speedups ranging from 1.85-4.92 over MSQT, depending on the size of the window. In QLQT, four diﬀerent lists (numbered 0-3) are associated with each leaf node. If a rectangle intersects the leaf quad, a pointer to it is stored in one of the four lists. The choice of the list is determined by the relative position of this rectangle with respect to the quad. The relative position is encoded by a pair of bits xy. x is 0 if the rectangle does not cross the lower boundary of the leaf quad and is 1, otherwise. Similarly, y is 0 if the rectangle does not cross the left boundary of the leaf quad and is 1, otherwise. The rectangle is stored in the list corresponding to the integer represented by this two bit string. Figure 52.13 illustrates the concept. Notice that each rectangle belongs to exactly one list 0. This corresponds to the quad that contains the bottom left corner of the rectangle. Observe, also, that the combination of the four lists in a leaf quad gives the same pointers as the single list in the same leaf in MSQT. The Region Search of MSQT can now be improved for QLQT by using the following procedure for each quad that intersects the query window: if the query window’s left edge crosses the quad, only the quad’s lists 0 and 1 need to be searched. If the window’s bottom edge crosses the quad, the quad’s lists 0 and 2 need to be searched. If the windows bottom left corner belongs to the quad, all four lists must be searched. For all other quads, only list 0 must be searched. Thus the advantages of the QLQT over MSQT are: 1. QLQT has to examine fewer list nodes than MSQT for a Region Search query. 2. Unlike MSQT, QLQT does not require marking and unmarking procedures to identify duplicates.

52.6.5

Bounded Quad Trees

Later, in 1989, Pitaksanonkul et al. proposed a variation of quad trees [26] that we refer to as Bounded Quad Trees (BQT). Here, a rectangle is only stored in the quad that contains its bottom left corner. (See the quad tree labeled “SINGLE” in Figure 52.11.) This may be viewed as a version of QLQT that only uses list 0. Experimental comparisons with k-d trees show that for small threshold values, quad trees search fewer nodes than k-d trees.

© 2005 by Chapman & Hall/CRC

52-16

r

Handbook of Data Structures and Applications

s

A

B

A

B

C

0

2

0 D1 D2 D3 D4

u

D1

C

D2 v

D3 t

D4

0 1

0 r1

1 0 0 1 s

0 1

0 t1

3

0

0 1

u1 0 0 1 0 0 s1 0 1 u1

11 00 v 00 11

1

1

0 1 1 0

0 t1 0 t1 1 0 0 1

u1 0

FIGURE 52.13: The leaf quads are A, B, C, D1, D2, D3, and D4. The rectangles are r − v. Rectangle t intersects quads C, D3, and D4 and must appear in the lists of each of the leaf nodes in the quad tree. Observe that t does not cross the lower boundaries of any of the three quads and x = 0 in each case. However, t does cross the left boundaries of D3 and D4 and y = 1 in these cases. Thus t goes into list 1 in D3 and D4. Since t does not cross the left boundary of C, it goes into list 0 in C. Note that the ﬁlled circles represent pointers to the rectangles rather than the rectangles themselves.

52.6.6

HV Trees

Next, in 1993, Lai et al. [27] presented a variation that once again uses bisector lists. It overcomes some of the ineﬃciencies of the original BLQT by a tighter implementation: An HV Tree consists of alternate levels of H-nodes and V-nodes. An H node splits the space assigned to it into two halves with a horizontal bisector while a V-node does the same by using a vertical bisector. A node is not split if the number of rectangles assigned to it is less than some ﬁxed threshold. Rectangles intersecting an H node’s horizontal bisector are stored in the node’s bisector list. Bisector lists are implemented using cut trees. A vertical cutline divides the horizontal bisector into two halves. All rectangles that intersect this vertical cutline are stored in the root of the cut tree. All rectangles to the left of the cutline are recursively stored in the left subtree and all rectangles to the right are recursively stored in the right subtree. So far, the data structure is identical to Kedem’s binary tree implementation of the bisector list. In addition to maintaining a list of rectangles intersecting a vertical cutline at the corresponding node n, the HV tree also maintains four additional bounds which signiﬁcantly improve performance of the Region Search operation. The bounds y upper bound and y lower bound are the maximum and minimum y coordinates of any of the rectangles stored in n or in any of n’s descendants. The bounds x lower bound and x upper bound are the minimum and maximum x coordinates of the rectangles stored in node n. Figure 52.14 illustrates these concepts. Comprehensive experimental results comparing HVT with BQT, kD, and QLQT showed that the data structures ordered from best to worst in terms of space requirements were HVT, BQT, kD, and QLQT. In terms of speed, the best data structures were HVT and QLQT followed by BQT and ﬁnally kD.

© 2005 by Chapman & Hall/CRC

Layout Data Structures 8

52-17 C

A

Root

F

7

D

6

3

Xbds(2,9) Q1

1

2

3

8

9

11 12

Ybds(4,7)

nodeL

Q2

B

1

D

Xbds(16,21)

Ybds(2,7.5)

2

C

E

5 4

Xbds(11,15) Ybds(2,8)

nodeR A

14 15 16

18

20 21

B

E

25

FIGURE 52.14: Bisector list implementation in HVT. All rectangles intersect the thick horizontal bisector line (y = 5). The ﬁrst vertical cutline at x = 13 corresponding to the root of the tree intersects rectangles C and D. These rectangles are stored in a linked list at the root. Rectangles A and B are to the left of the vertical cutline and are stored in the left subtree. Similarly, rectangles C and D are stored in the right subtree. The X bounds associated with the root node are obtained by examining the x coordinates of rectangles C and D, while its Y bounds are obtained by examining the y coordinates of all six rectangles stored in the tree. The two shaded rectangles are query rectangles. For Q1, the search will start at Root, but will not search the linked list with C and D because Q1’s right side is to the left of Root’s lower x bound. The search will then examine nodeL, but not nodeR. For Q2, the search will avoid searching the bisector list entirely because its upper side is below Root’s lower y bound.

52.6.7

Hinted Quad Trees

In 1997, Lai et al. [28] described a variation of the QLQT that was speciﬁcally designed for design rule checking. Design-rule checking requires one to check rectangles in the vicinity of the query rectangle for possible violations. Previously, this was achieved by employing a traditional region query whose rectangle was the original query rectangle extended in all directions by a speciﬁed amount. Region searches start at the root of the tree and proceed down the tree as discussed previously. The hinted quadtree is based on the philosophy that it is wasteful to begin searching at the root, when, with an appropriate hint, the algorithm can start the search lower down in the tree. Two questions arise here: at which node should the search begin and how does the algorithm get to that node? The node at which the design rule check for rectangle r begins is called the owner of r. This is deﬁned as the lowest node in the quad-tree that completely contains r expanded in all four directions. Since the type of r is known (e.g., whether it is n-type diﬀusion or metal), the amount by which r has to be expanded is also known in advance. Clearly, any rectangle that intersects the expanded r must be referenced by at least one leaf in the owner node’s subtree. The owner node may be reached by following parent pointers from the rectangle. However, this could be expensive. Consequently, in HQT, each rectangle maintains a pointer to the owner virtually eliminating the cost of getting to that node. Although this is the main contribution of the HQT, there are additional implementation improvements over the underlying QLQT that are used to speed up the data structure. First, the HQT resolves the situation where the boundary of a rectangle stored in the data structure or a query rectangle coincides with that of a quad. Second, HQT sorts the four lists of rectangles stored in each leaf node with one of their x or y coordinates as keys. This reduces the search time at the leaves and consequently makes it possible to use a higher threshold than that used in QLQT. Experimental results showed that HQT out-performs QLQT, BQT, HVT, and k-d on neighbor-search queries by at least 20%. However, its build-time and space requirements were not as good as some of the other data structures.

© 2005 by Chapman & Hall/CRC

F

52-18

52.7

Handbook of Data Structures and Applications

Concluding Remarks

Most of the research in VLSI layout data structures was carried out in the early 80s through the mid-90s. This area has not been very active since then. One reason is that there continue to be several important challenges in VLSI physical design automation that must be addressed quickly so that physical design does not become a bottleneck to the continuing advances in semiconductors predicted by Moore’s Law. These challenges require physical design tools to consider “deep sub-micron eﬀects” into account and take priority over data structure improvements. The implication of these eﬀects is that problems in VLSI physical design are no longer purely geometric, but rather need to merge geometry with electronics. For example, in the early 1980s, one could safely use the length of a wire to estimate the delay of a signal traveling along it. This is no longer true for the majority of designs. Thus, the delay of a signal along the wire must now be estimated by factoring in its resistance and capacitance, in addition to its geometry. On the other hand, the more detailed computations of electronic quantities like capacitance, resistance, and inductance require the underlying data structures to support more complex operations. Thus, the author believes that there remain opportunities for developing better layout data structures. Another area that, to the best of our knowledge, has been neglected in the academic literature is that VLSI layout data needs to be eﬃciently stored in secondary storage because of its sheer size. Thus, although there is potential for academic research in this area, we believe that the design automation industry may well have addressed these issues in their proprietary software. Unlike corner stitching, quad-trees permit rectangles to overlap. This addresses the problem that corner stitching has with handling multiple layers. On the other hand, corner stitching was designed for use in the context of an interactive layout editor, whereas quad trees are designed in the context of batched operations. We note that, to our knowledge, relatively recent data structures such as R trees have not been used for VLSI layout. It is unclear what the outcome of this comparison will be. On one hand, R-trees are considered to be faster than quad trees. On the other, the quad-trees developed in VLSI have been improved and optimized signiﬁcantly as we have seen in this chapter. Also, VLSI data has generally been considered to consist of uniformly small rectangles, which may make it particularly suitable for quad trees, although this property may not be true when wires are considered.

Acknowledgment This work was supported, in part, by the National Science Foundation under grant CCR9988338.

References [1] N. Sherwani, Algorithms for VLSI Physical Design Automation. Boston: Kluwer Academic Publishers, 1992. [2] M. Sarrafzadeh, C. K. Wong, An Introduction to VLSI Physical Design. New York: McGraw Hill, 1996. [3] S. Sait, H. Youssef, VLSI Physical Design Automation: theory and practice. Piscataway, NJ: IEEE Press, 1995. [4] N. H. E. Weste, K. Eshraghian, Principles of CMOS VLSI Design: A Systems Perspective, Second Edition. New York: Addison Wesley, 1993. [5] J. L. Hennessy, D. A. Patterson, Computer Architecture: A Quantitative Approach, Third Edition. New York: Morgan Kaufmann, 2003.

© 2005 by Chapman & Hall/CRC

Layout Data Structures

52-19

[6] D. G. Boyer, “Symbolic Layout Compaction Review,” Proceedings of 25th Design Automation Conference, pages 383-389, 1988. [7] J. Ousterhout, G. Hamachi, R. Mayo, W. Scott, G. Taylor, “Magic: A VLSI layout system,” in Proc. of 21st Design Automation Conf., pp. 152–159, 1984. [8] J. K. Ousterhout, “Corner Stitching: A data structuring technique for VLSI layout tools,” IEEE Transactions on Computer-aided Design, vol. 3, no. 1, pp. 87–100, 1984. [9] D. P. Mehta “Estimating the Memory Requirements of the Rectangular and L-shaped Corner Stitching Data Structures,” ACM Transactions on the Design Automation of Electronic Systems. Vol. 3, No. 2, April 1998. [10] M. Quayle, J. Solworth, “Expanded Rectangles: A New VLSI Data Structure,” in ICCAD, pp. 538–541, 1988. [11] D. Marple, M. Smulders, and H. Hegen, “Tailor: A Layout System Based on Trapezoidal Corner Stitching,” IEEE Transactions on Computer-aided Design, vol. 9, no. 1, pp. 66–90, 1990. [12] C. H. S´equin and H. da Silva Fa¸canha, “Corner Stitched Tiles with Curved Boundaries,” IEEE Transactions on Computer-aided Design, vol. 12, no. 1, pp. 47–58, 1993. [13] D. P. Mehta, G. Blust, “Corner Stitching for Simple Rectilinear Shapes,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 16, pp. 186– 198, Feb. 1997. [14] D. P. Mehta “CLOTH MEASURE: A Software Tool for Estimating the Memory Requirements of Corner Stitching Data Structures,” VLSI Design, Vol. 7, No. 4, pp 425-436, 1998. [15] S. Nahar and S. Sahni, “A Fast Algorithm for Polygon Decomposition,” IEEE Transactions on Computer-aided Design, vol. 7, pp. 478–483, Apr. 1988. [16] T. Ohtsuki, “Minimum Dissection of Rectilinear Regions,” in Proceedings 1982 International Symposium on Circuits and Systems (ISCAS), pp. 1210–1213, 1982. [17] H. Imai, T. Asano, “Eﬃcient Algorithms for Geometric Graph Search Algorithms,” SIAM Journal on Computing, vol. 15, pp. 478–494, May 1986. [18] W. T. Liou, J. J. M. Tan, and R. C. T. Lee, “Minimum Partitioning of Simple Rectilinear Polygons in O(n loglog n) time,” in Proceedings of the Fifth Annual Symposium on Computational Geometry, pp. 344–353, 1989. [19] S. Wu and S. Sahni, “Fast Algorithms to Partition Simple Rectilinear Polygons,” International Journal on Computer Aided VLSI Design, vol. 3, pp. 241–270, 1991. [20] M. Lopez, D. Mehta, “Eﬃcient Decomposition of Polygons into L-shapes with Applications to VLSI Layouts,” ACM Transactions on Design Automation of Electronic Systems, vol. 1, pp. 371–395, 1996. [21] D. Mehta, E. Wilson, “Parallel Algorithms for Corner Stitching,” Concurrency: Practice and Experience, vol. 10, pp. 1317-1341, 1998. [22] G. Kedem, “The quad-CIF tree: A data structure for hierarchical on-line algorithms,” in Proceedings of the 19th Design Automation Conference, pp. 352–357, 1982. [23] J. B. Rosenberg, “Geographical Data Structures Compared: A Study of Data Structures supporting Region Queries,” IEEE Transactions on Computer-Aided Design, vol. 4, no. 1, pp. 53–67, 1985. [24] R. L. Brown, “Multiple Storage Quad Trees: A Simpler Faster Alternative to Bisector List Quad Trees,” IEEE Transactions on Computer-Aided Design, vol. 5, no. 3, pp. 413–419, 1986. [25] L. Weyten, W. de Pauw, “Quad List Quad Trees: A Geometric Data Structure with Improved Performance for Large Region Queries,” IEEE Transactions on Computer-Aided Design, vol. 8, no. 3, pp. 229–233, 1989. [26] A. Pitaksanonkul, S. Thanawastien, C. Lursinsap, “Comparison of Quad Trees and 4-D Trees: New Results,” IEEE Transactions on Computer-Aided Design, vol. 8, no. 11,

© 2005 by Chapman & Hall/CRC

52-20

Handbook of Data Structures and Applications

pp. 1157–1164, 1989. [27] G. Lai, D. S. Fussell, D. F. Wong, “HV/VH Trees: A New Spatial Data Structure for Fast region Queries,” in Proceedings of the 30th Design Automation Conference, pp. 43–47, 1993. [28] G. Lai, D. S. Fussell, D. F. Wong, “Hinted Quad Trees for VLSI Geometry DRC Based on Eﬃcient Searching for Neighbors,” IEEE Transactions on Computer-Aided Design, vol. 15, no. 3, pp. 317–324, 1996.

© 2005 by Chapman & Hall/CRC

53 Floorplan Representation in VLSI 53.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

53-1

Statement of Floorplanning Problem • Motivation of the Representation • Combinations and Complexities of the Various Representations • Slicing, Mosaic, LB Compact, and General Floorplans

53.2

Graph Based Representations . . . . . . . . . . . . . . . . . . . . Constraint Graphs • Corner Stitching Tree • Single Tree Representations

53.3 53.4

Chung-Kuan Cheng University of California, San Diego

53.1

•

Corner

Relationships of the Representations . . . . . . . . . . . . 53-24 Summary of the Relationships • A Mosaic Floorplan Example • A General Floorplan Example

Bo Yao University of California, San Diego

53-8

Twin Binary

Placement Based Representations . . . . . . . . . . . . . . . 53-16 Sequence-Pair • Bounded-Sliceline Grid Block List • Slicing Tree

Zhou Feng Fudan University

•

53.5 53.6 53.7

Rectilinear Shape Handling . . . . . . . . . . . . . . . . . . . . . . . 53-27 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-28 Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-28

Introduction

There are two main data models that can be used for representing ﬂoorplans: graph-based and placement based. The graph-based approach includes constraint graphs, corner stitching, twin binary tree, and O-tree. They utilize constraint graphs or their simpliﬁed versions directly for the encoding. Constraint graphs are basic representations. The corner stitching simpliﬁes the constraint graph by recording only the four neighboring blocks to each block. The twin binary tree then reduces the recorded information to only two neighbors of each block, and organizes the neighborhood relations in a pair of binary trees. The O-tree is a further simpliﬁcation to the twin binary tree. It keeps only one tree for encoding. The placement-based representations use the relative positions between blocks in a placement for encoding. This category includes sequence pair, bounded-sliceline grid, corner block list and slicing trees. The sequence pair and bounded-sliceline grid can be applied to general ﬂoorplan. The corner block list records only the relative position of adjacent blocks, and is available to mosaic ﬂoorplan only. The slicing trees are for slicing ﬂoorplan, which is a type of mosaic ﬂoorplan. The slicing ﬂoorplan can be constructed by hierarchical horizontal or vertical merges and thus can be captured by a binary tree structure known as the slicing tree. The rest of this chapter is organized as follows. In Section 53.1, we give the introduction and the problem statement of ﬂoorplanning. In Section 53.2, we discuss the graph-based

53-1

© 2005 by Chapman & Hall/CRC

53-2

Handbook of Data Structures and Applications

representations. In Section 53.3, we introduce the placement-based representations. We describe the relationship between diﬀerent representations in Section 53.4. We illustrate the shape handling of rectilinear blocks in Section 53.5 and summarize the chapter in Section 53.6.

53.1.1

Statement of Floorplanning Problem

Today’s complexity in circuitry design wants a hierarchical approach [26]. The entire circuit is partitioned into several sub-circuits, and the sub-circuits are further partitioned into smaller sub-circuits, until they are small enough to be handled. The relationship between the sub-circuits can be represented with a tree as shown in Fig. 53.1. Here every subcircuit is called a block, and hence the entire circuit is called the top block. From the layout point of view, every block corresponds to a rectangle, which contains sub-blocks or directly standard cells. Among the decisions to be made is the determination of shape (aspect ratio) and the pin positions on the blocks. In the top-down hierarchical methodology, blocks are designed from the top block (the entire circuit) to the leaf blocks (small modules). The minimizations of chip area and wire length are the basic targets for any layout algorithm. In addition, there are case-dependent constraints that will inﬂuence the layouts, such as the performance, the upper or/and lower boundaries of aspect ratio, the directions of pins, etc.

A

A H

B G E

I

C

B

C

D

H

I

J

E

F

G

J

D F

K

L

K

L

FIGURE 53.1: Hierarchical structure of blocks. Now we give the deﬁnition of ﬂoorplanning problem: Inputs: 1. the net-lists of the sub-circuits; 2. the area estimation of blocks and, if any, the aspect ratio constraints on the blocks; 3. the target area and shape of the entire chip. Outputs: 1. the shapes and positions of blocks; 2. the pin positions on the blocks. The objective functions involve: the chip area, the total wire length and, if any, the performances.

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53.1.2

53-3

Motivation of the Representation

Floorplan representation becomes an important issue in ﬂoorplanning for the following reasons. (1) The blocks may have arbitrary shapes and locations, while the size of memory used to represent a two-dimensional ﬂoorplan should be O(n). (2) For the general ﬂoorplanning problem, iterative improvement is the commonly used approach. The search for the best solution has proven to be NP-complete, so many heuristic optimizing algorithms, such as dynamic programming, simulated annealing, zone reﬁnement, cluster reﬁnement, have been adopted. The representation should also facilitate the operations called by those optimizing algorithms. (3) The storage resources requirement, the redundancy of the representation and the complexity of translating the representation into ﬂoorplan are always the concerns in ﬂoorplanning. Here redundancy refers to the situation that several diﬀerent expressions actually correspond to the same physical layout. Essentially, a heuristic algorithm searches part of the solution space to ﬁnd the local optimal solution, which is hopefully very close to the global optimal solution. Redundancy causes the optimizing algorithm evaluate the same ﬂoorplan repeatedly.

53.1.3

Combinations and Complexities of the Various Representations

The number of possible ﬂoorplan representations describes how large the searching space is. It also discloses the redundancy of the representation. For general ﬂoorplans with n blocks, the combinations of the various representations are listed in Table 53.1. Note that the twin binary tree representation has a one to one relation with the mosaic ﬂoorplan, and the slicing tree has a one to one relation with the slicing ﬂoorplan [15]. In other words, for these two representations, the number of combinations is equal to the number of possible ﬂoorplan conﬁgurations and there is no redundancy. TABLE 53.1

Combinations of the representations.

Representation Twin binary tree

Combinations n!*B(n), where B(n) =

O-Tree Sequence pair Bounded-sliceline grid Corner block list Slicing tree

„

n+1 1

«−1 „

n+1 2

«−1

n P k=1

„

n+1 k−1

«„

n+1 k

«„

n+1 k+1

«

O(n!22n−2 /n1.5 ) 2 (n!) „ 2 « n n! n O(n!23n−3 /n1.5 ) n!*A(n − 1), where A(n) is the super-Catalan number with the following definition: A(0) = A(1) = 1 and A(n) = (3(2n − 3)A(n − 1) − (n − 3)A(n − 2))/n

The combination numbers of sequence pairs, mosaic ﬂoorplans, slicing ﬂoorplans, and O-trees are illustrated on a log scale in Fig. 53.2. The combination numbers are normalized by n!, which is the number of permutations of n blocks. The slopes of the lines for mosaic ﬂoorplans, slicing ﬂoorplans, and O-tree structures are the constants 0.89, 0.76, and 0.59, respectively. On the other hand, the slope of the line for sequence pair increases with a rate of log n. Table 53.2 provides the exact numbers of the combinations for the ﬂoorplans or representations with the block number ranging from 1 to 17. The time complexities of the operations transforming a representation to a ﬂoorplan are

© 2005 by Chapman & Hall/CRC

53-4

Handbook of Data Structures and Applications

FIGURE 53.2: Combination of ﬂoorplans and representations. TABLE 53.2 Exact number of combinations of diﬀerent ﬂoorplan conﬁgurations and representations. Number of blocks 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Combinations of O-tree 1 2 5 14 42 132 429 1,430 4,862 16,796 58,786 208,012 742,900 2,674,440 9,694,845 35,357,670 129,644,790

TABLE 53.3

Combinations of slicing floorplan 1 2 6 22 90 394 1,806 8,558 41,586 206,098 1,037,718 5,293,446 27,297,738 142,078,746 745,387,038 3,937,603,038 20,927,156,706

Combinations of mosaic floorplan 1 2 6 22 92 422 2,074 10,754 58,202 326,240 1,882,690 11,140,560 67,329,992 414,499,438 2,593,341,586 16,458,756,586 105,791,986,682

Combinations of sequence pairs 1 2 6 24 120 720 5,040 40,320 362,880 3,628,800 39,916,800 479,001,600 6,227,020,800 87,178,291,200 1,307,674,368,000 20,922,789,888,000 355,687,428,096,000

Time Complexity comparison of the representations.

Representation Constraint graph Corner stitching Twin binary tree O-Tree Sequence pair Bounded-sliceline grid Corner block list Slicing tree

From a representation to a floorplan O(n) O(n) O(n) O(n) O(nloglogn) O(n2 ) O(n) O(n)

very important, because they determine the eﬃciency of the ﬂoorplan optimizations. The complexities of the representations covered in this chapter are compared in Table 53.3, where n is the number of blocks in a ﬂoorplan.

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-5

For sequence-pair, the time complexity to derive a ﬂoorplan is O(nloglogn) due to a fast algorithm proposed in [8]. We will discuss more on this in Section 53.3.1 For bounded slicing grid, there is a trade oﬀ between the solution space and the time complexity of deriving a ﬂoorplan. To ensure that the solution space covers all the optimal solutions, we need the grid size to be at lease n by n. This results in an O(n2 ) time complexity in deriving a ﬂoorplan [6]. For the rest of the representations, there are algorithms with O(n) time complexity to convert them into constraint graphs. The time complexity to derive a ﬂoorplan is thus O(n).

Empty space

(a)

(b)

(c)

FIGURE 53.3: (a) Slicing ﬂoorplan; (b) Mosaic ﬂoorplan; (c) General ﬂoorplan.

Slicing fl. Mosaic fl. LB-Compact fl. General fl. FIGURE 53.4: Set coverage of slicing ﬂoorplan, mosaic ﬂoorplans, LB-compact ﬂoorplans and general ﬂoorplans.

53.1.4

Slicing, Mosaic, LB Compact, and General Floorplans

A layout can be classiﬁed as a slicing ﬂoorplan if we can partition the chip with recursive horizontal or vertical cut lines (Fig. 53.3(a)). In a mosaic ﬂoorplan, the chip is partitioned by horizontal and vertical segments into rectangular regions and each region corresponds to exactly one block (Fig. 53.3(b)). For a general ﬂoorplan, we may ﬁnd empty space outside rectangular block regions (Fig. 53.3(c)). An LB-compact ﬂoorplan is a restricted general ﬂoorplan in that all blocks are shifted to their left and bottom limits. In summary, the set

© 2005 by Chapman & Hall/CRC

53-6

Handbook of Data Structures and Applications

of general ﬂoorplans covers the set of LB-compact ﬂoorplans, which covers the set of mosaic ﬂoorplans, and which covers the set of slicing ﬂoorplans (Fig. 53.4). For slicing and mosaic ﬂoorplans, the vertical segments deﬁne the left-right relation among the separated regions, and the horizontal segments deﬁne the above-below relation. Suppose that we shift the segments to change the sizes of the regions, we view the new ﬂoorplan to be equivalent to the original ﬂoorplan in terms of their topologies[4][23][24]. Therefore, we can devise representations to deﬁne the topologies of slicing and mosaic ﬂoorplans independent of the sizes of the blocks (Fig. 53.3(a) and (b)). In contrast, for a general ﬂoorplan, it is rather diﬃcult to draw a meaningful layout (Fig. 53.3(c)) without the knowledge of the block dimensions. One approach is to extend the mosaic ﬂoorplans to general ﬂoorplans by adding empty blocks [16]. It is shown that to convert a mosaic ﬂoorplan with n blocks √ into a general ﬂoorplan, the upper bound on the number of empty blocks inserted is n− 2 n+ 1. [16]

A B

A B

(a)

B

B

A (b)

A (c)

(d)

FIGURE 53.5: Four directions of T-junctions.

¥ (a)

(b)

FIGURE 53.6: Degeneration.

In a mosaic ﬂoorplan, two adjacent blocks meet at a T-junction by sharing the noncrossing edge of the junction. There are four directions of T-junctions as is illustrated in Fig. 53.5. In the case of Fig. 53.5(a) and (b), block B is termed the C-neighbor at the lower left corner of block A. In Fig. 53.5(c) and (d), block B is the C-neighbor at the upper right corner of block A. The C-neighbor is used to construct twin binary tree representation. The degeneration of a mosaic ﬂoorplan refers to the phenomenon that two T-junctions meet together to make up a cross-junction, as illustrated in Fig. 53.6(a). Some representations forbid the occurrence of degeneration. One scheme to solve the problem is to break one of the intersecting lines and assume a slight shift between the two segments, as shown in Fig. 53.6(b). Thus the degeneration disappears.

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-7

We generate an LB compact ﬂoorplan by compacting all blocks toward left and bottom. For a placement, suppose no block can be moved left, the placement is called L-compact. Similarly, if no block can be moved down, the placement is called B-compact. A ﬂoorplan is LB-compact if it is both L-compact and B-compact (Fig. 53.7).

B

B

C

A

B C

A

Not L-compact Not B-compact

B

C

A

Not L-compact B-compact

C

A

L-compact Not B-compact

L-compact B-compact

FIGURE 53.7: Examples of L-compact and B-compact.

B

A

C F D

E

top

(a) B

A

C

left

E F

E

B

A

D (b)

C

D

right down

(c)

FIGURE 53.8: Constraint graphs for a general ﬂoorplan.

© 2005 by Chapman & Hall/CRC

F

53-8

Handbook of Data Structures and Applications

53.2

Graph Based Representations

Graph based representations include constraint graphs, corner stitching, twin binary trees, and O-tree. They all utilize the constraint graphs or their simpliﬁed version for ﬂoorplan encoding.

53.2.1

Constraint Graphs

Constraint graphs are directed acyclic graphs representing the adjacency relations between the blocks in a ﬂoorplan. In this subsection, we ﬁrst deﬁne the constraint graphs for general ﬂoorplans. We then show that for mosaic ﬂoorplan, the constraint graphs have nice properties of triangulation and duality.

top

E

E D

D A

B

left

C

E

D B

A

right

A

B

C C (a)

(b)

(c)

down

FIGURE 53.9: Constraint graphs for a mosaic ﬂoorplan.

The generation of constraint graphs

Constraint graphs reﬂect the relative positions between blocks [12]. Constraint graphs can be applied to general ﬂoorplans, as is shown in Fig. 53.8. A node in the constraint graph represents a block. A directed edge denotes the location relationship between two blocks. For example, A→B means block A is to the left of B in a horizontal constraint graph (Fig. 53.8(b)). A→E means block A is on top of E in a vertical constraint graph (Fig. 53.8(c)). Here we imply that if A→B and B→C, then A→C. Thus even though block A stands to the left of C, the edge between A and C is not necessarily shown. To mark the four sides of the chip, we add the nodes labeled with “left”, “right”, “top” and “down”. A pair of horizontal and vertical constraints graphs can represent a ﬂoorplan. Every constraint graph, whether it is a horizontal one or a vertical one, is planar and acyclic. Fig. 53.9 shows an example of the constraint graphs to a mosaic ﬂoorplan. Fig 53.9(a) is the mosaic ﬂoorplan. Fig 53.9(b) and (c) are the corresponding horizontal and vertical constraint graphs, respectively.

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-9

Triangulation

For a mosaic ﬂoorplan without degeneration, if its horizontal and vertical constraint graphs are merged together, then we have the following conclusions [12]: 1. Every face is a triangle. 2. All internal nodes have a degree of at least 4. 3. All cycles, if not faces, have the length of at least 4. Shown in Fig. 53.10(a) is the result of merging the pair of constraint graphs in Fig. 53.9. In fact, the merged constraint graph is a dual graph of its original ﬂoorplan (Fig. 53.9(b)).

top

E

E

D B

left

A

B

D

A

C

C down

right

(a)

(b)

FIGURE 53.10: Triangulation.

Tutte’s duality[27]

We can also build an edge-based constraint graph for a mosaic ﬂoorplan, where the nodes denote the lines separating the blocks while the edges denote the blocks. Labeling the lines with numbers (Fig. 53.11(a)), we build a vertical constraint graph (Fig. 53.11 (b)) and a horizontal constraint graph (Fig. 53.11(c)). Fig. 53.11(d) demonstrates the result of merging the vertical and horizontal constraint graphs. Here, to make the merged graph clear, the edges representing horizontal constraints are drawn with dotted lines, and a letter at the intersection of a solid edge and a dotted edge denotes the two edges simultaneously. It is very interesting that, for mosaic ﬂoorplans, the vertical and horizontal constraint graphs are dual, as is called Tutte’s duality. Let’s see how Tutte’s duality is used to solve the sizing problem in ﬂoorplanning. We map the constraint graphs into circuit diagrams by replacing the edges in the vertical constraint graph with resistors, as illustrated in Fig. 53.12. The circuit is subject to Kirchoﬀ voltage law. As a result, taking Fig. 53.12 as an

© 2005 by Chapman & Hall/CRC

53-10

Handbook of Data Structures and Applications

1

2

D

E 5

4

B

7

6 A

D

2

E

4

B

C

A

6

3 C

7

(c)

8 (a) 1

E

1 5

B 3

D

2

E

D

A

4

C

8

(b)

A

6

B

3

C

5

7

8

(d)

FIGURE 53.11: Line-based constraint graphs.

E

1

D

E

+ 5

B 3

D A

A

B

-

C 8

(a)

C (b)

FIGURE 53.12: Mapping a constraint graph to a circuit. example, we have: VE + VB = VD VD + VC = VA VA = Vsource Ri = VIii , i ∈ {A, B, C, D, E}

IE = IB IE + ID = IC IC + IA = Isource

Note that, if we denote the height and the width of block i to be Hi and Wi , we have (refer

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-11

to Fig. 53.12(a)): HE + HB = HD HD + HC = HA HA = Hchip Hi AspectRatioi = W , i ∈ {A, B, C, D, E} i

WE = WB WE + WD = WC WC + WA = Wchip

By comparing the above two equation arrays, we can ﬁnd that there is a perfect correspondence between the solutions of the circuit and the ﬂoorplan. Let us set the following assumptions: (only two of the three equations are independent) Ri = AspectRatioi Vsource = Hchip Isource = Wchip Then we have: Vi = Hi Ii = Wi Thus the theories dealing with large circuits can be borrowed to solve the sizing problem in ﬂoorplanning. Constraint graphs have the advantages of being able to cope with any types of ﬂoorplans. However, it would be rather diﬃcult to shift to a new ﬂoorplan with just a few simple operations on the graph. The eﬃciency is greatly discounted for the iteratively improving algorithms. Thus in [25], a transitive closure graph (TCG) was proposed to simplify the rules of the operations. The relation of each pair of blocks is prescribed in either horizontal or vertical constraint graph via transitive closure, but not in both graphs.

53.2.2

Corner Stitching

Corner stitching is used to represent the topology of a mosaic ﬂoorplan. Simpliﬁed from constraint graphs, corner stitching [17] keeps only four pointers at the two opposite corners for every block. All the operations on a constraint graph can also be fulﬁlled on a corner stitching representation with acceptable increases in time complexity, while the storage for corner stitching becomes easier since the number of pointers attached to every block is ﬁxed (equals to 4). Readers are referred to Chapter 52 for detailed descriptions and analyses of corner stitching.

53.2.3

Twin Binary Tree

Twin binary tree [15] representation applies to mosaic ﬂoorplans without degeneration. The twin binary tree is constructed as follows, every block takes its C-neighbor (Fig. 53.5) as its parent. In the ﬁrst tree, only the C-neighbors in lower left corners (Fig. 53.5 (a) and (b)) are taken into account. If the related T-junction is of type (a), then the block is a left child of its parent, and if the T-junction is of type (b), then the block is a right child. The most bottom-left block in the ﬂoorplan acts as the root of the tree. Similarly, in the second tree, the C-neighbors in upper right corners (Fig. 53.12(c) and (d)) are used, and the most upper-right block becomes the tree’s root. Fig. 53.13 gives an example of a twin binary tree. The pointers of twin binary trees are in fact a subset of those in corner stitching. Besides, It has been proved that twin binary tree is a non-redundant representation. In other words, every pair of trees corresponds to a unique mosaic ﬂoorplan.

© 2005 by Chapman & Hall/CRC

53-12

Handbook of Data Structures and Applications

B

F B C

D

F

C

D

A

E

A

A

C

D

E

B

E (a)

F (b)

(c)

FIGURE 53.13: Twin binary tree.

B

F A C B (a)

0

1

C

1

D 10

D

A

E

F

0

1 (b)

E

0

0 1

FIGURE 53.14: Extended trees. The twin properties of binary trees can be illustrated with Fig. 53.14. Consider the trees shown in Fig. 53.13, we add a left child labeled ‘0’ to every node without left child except the most left node, and a right child labeled ‘1’ to every node without right child except the most right node. The resultant trees are the so-called extended trees (Fig. 53.14). The sequences of the in-order traverse of the two extended trees shown in Fig. 53.14 are “A0B1C1F0D1E” and “A1B0C0F1D0E” respectively. If we separate them into the label parts and the bit parts, we have π 1 =ABCFDE, α1 =01101 π 2 = ABCFDE and α2 = 10010. It is interesting to ﬁnd that π 1 =π 2 and α1 = α2 . So rather than store the two binary trees, we only keep the linear listsπ andαin memory. However, it is insuﬃcient to recover the two binary trees just from π and α, so we need two more lists, β and β . If the i-th element inπ is the left child of its parent in the ﬁrst tree or the root of the tree, we set the i-th element in β to be ‘0’, otherwise we set it ‘1’. In the similar way β is constructed according to the second tree. Thus we use a group of linear lists {π,α, β,β }, called the twin binary sequence [16], to express the twin binary tree, and equivalently the ﬂoorplan. Finally, we give the main properties of twin binary tree representation: 1. The memory required for storing the twin binary sequence is log 2 n+3n-1, because |π|= log 2 n, |α| = n-1, and |β| = |β | = n. 2. Twin binary tree is a non-redundancy ﬂoorplan representation. 3. The complexity of the translation between twin binary sequence and ﬂoorplan is O(n).

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53.2.4

53-13

Single Tree Representations

An ordered-tree (O-tree) [2][3], or equivalently the B∗ tree [1] representation uses a spanning tree of the constraint graph and the dimensions of the blocks. Because the widths and heights of the blocks are given, the representation can describe one kind of general ﬂoorplan termed LB-compact. With a proper encoding, a great enhancement on the storage eﬃciency and the perturbation easiness is obtained. A horizontal O-tree is derived with the following rules: 1. If block A lies adjacent to the left side of block B, or, Xa + Wa = Xb (here Xa is the coordinate of block A on the X-axis and Wa is the width of block A), then on the O-tree, B is A’s child. If there happens to exist more than one block adjacent to the left side of block B (satisfying the requirement Xi + Wi = Xb ), one of them is assigned to be the parent of block B. 2. If block A lies on top of block B and the two blocks have the same parents on the O-tree, then B is A’s elder brother. 3. A virtual block is presumed to have the left most position, and therefore serves as the root of the O-tree. Fig. 53.15 shows an example of an O-tree representation for the same mosaic ﬂoorplan shown in Fig. 53.13. If we show the pointer of every block pointing to its parent in the O-tree (Fig. 53.15(b)), we can ﬁnd that the pointers are in fact a subset of those in twin binary tree. Similarly a vertical O-tree can be built up. Without the loss of generality, hereafter we only discuss the horizontal O-tree.

B

B

A

A C

root F

E

C

D

F

(a)

D E

(b)

FIGURE 53.15: Building an O-tree.

Next, let’s describe the O-tree with linear lists: a bit string (denoted with T ) and a label string (denoted with π). The bit string records the structure of an O-tree. We make a depth-ﬁrst traverse on the O-tree. A “0” is inserted into T for descending an edge while a “1” for ascending an edge. For example, the O-tree in Fig. 53.16 corresponds to the bit string T=“001100011011”. Inversely, given the bit string, the structure of the O-tree is solely determined. To get the complete description of an O-tree, we need a second linear list, the label string, to record the labels of the tree’s nodes. Not only should the label string include all the labels of the tree’s nodes, but also reﬂect the labels’ positions on the tree. A depth-ﬁrst traverse generates such a linear list. For the example in Fig. 53.16, we have π= ‘FEACDB’.

© 2005 by Chapman & Hall/CRC

53-14

Handbook of Data Structures and Applications

B

1

1

0

1 C

0

0 1

root

0 1

A

D

0 1 F

E

0 FIGURE 53.16: Derivation of T, π. Given a horizontal O-tree, or {T, π}, and the dimensions of blocks, the positions of blocks can be derived with the following rules: 1. Each block has to be placed to the left of its children. 2. If two blocks overlap along their x-coordinate projection, then the block having a higher index in π must be placed on top of the other one. In fact the second rule applies to the situation in which none of the two blocks is a descendant of the other, like blocks ‘f and “a”, or “b” and “d”, in Fig. 53.16. The way we derive π indicates that the block with higher index always stands “higher”. To get to a placement, we need to locate all the blocks. The following operation is executed on blocks according to their orders in π. Here Bi refers to the i-th block, and (xi , yi ) refers to the coordinate of Bi ’s left-bottom corner. 1. Find Bi ’s parent, Bj , and then we havexi = xj + wj , here wj is the width of block Bj . 2. Let ψ be a set of blocks who have a lower index than Bi in π and have an projection overlap with Bi in the X-axis, ﬁnd the maximum yk + wk for Bk ∈ ψ, then we have yi = max(yk + wk ). Now we analyze the performance of O-tree: 1. The bit string has a length of 2n for an O-tree of n blocks, because each node except the root has an edge towards its parents and each edge is traversed twice during the construction of the bit string. The label string takes n log2 n bits for we have to use log2 n bits to distinguish the n blocks. So the total memory occupied by an O-tree is n(2 + log2 n). By comparison, a sequence pair takes 2n log2 n bits and a slicing structure takes n(6 + log2 n) bits. 2. The time needed to transform {T,π} to a placement is linear to the number of blocks, or we can say the complexity of transforming {T,π} to a placement is O(n). For a sequence pair or a slicing structure, the complexity is O(n log2 log2 n) or O(n) respectively. Upon this point, O-tree has the same performance as the slicing structure but is more powerful for representing a placement.

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-15

3. The number of combinations is O(n!·22n−2 /n1.5 ), which is smaller than any other representation that has ever been discussed.

e

c

d

b

c b

e

c

d

b

f

c

c

e

b

d

a

d a

f

d

e

a

a

b

f

f

f

e

a

f e

c b

d a

FIGURE 53.17: Transformation between horizontal and vertical O-trees.

The ﬂoorplan of an arbitrarily given O-tree is not necessarily LB-compact. Yet in this case, we can compact the ﬂoorplan to reduce the chip area. Notice that an O-tree-toplacement transform tightens the blocks, with one direction having the priority. For example, in a placement transformed from a horizontal O-tree, the blocks are placed tighter along the X-axis than along the Y-axis. It would be undoubted that a placement transformed from a vertical O-tree will give Y-axis the priority. Thus, by iteratively making the transforms between horizontal O-trees and vertical O-trees via placements, we can ﬁnally reach an LB-compact ﬂoorplan (Fig. 53.17). On the other hand, given an LB-compact ﬂoorplan, we can always derive an O-tree representation. For example, Figure 53.18 illustrates a general ﬂoorplan with seven blocks and the corresponding O-tree. O-tree is able to cover LB-compact ﬂoorplan with the smallest number of combinations in Table 53.1 and Fig. 53.2 because the O-tree structure avoids redundancy and screens improper ﬂoorplans by taking advantage of the knowledge of the block dimensions. For example, given an O-tree, we can convert it to a binary tree and ﬁnd many other possible trees to pair up as twin binary trees, which correspond to many diﬀerent mosaic ﬂoorplans. In the perspective of O-tree representation, these ﬂoorplans are the variations due to the diﬀerences of the block sizes. The B∗ tree and the O-tree are equivalent because the transformation between the two is one to one mapping. The merit of the B tree is a diﬀerent data structure and implementation.

© 2005 by Chapman & Hall/CRC

53-16

Handbook of Data Structures and Applications

F C

E E

root

F

C

G

G

B

B A

A

D

D

FIGURE 53.18: An O-tree representation of a general ﬂoorplan.

Constraint graph Corner stitching Twin binary tree O-tree

FIGURE 53.19: Relationship between the constraint graph based representation. In summary, among the constraint-graphs based representations, from the point of view of the pointers necessary for representing the ﬂoorplans, O-tree is a subset of twin binary tree; twin binary is a subset of corner stitching; and corner stitching is a subset of constraint graphs, as demonstrated in Fig. 53.19.

53.3

Placement Based Representations

The placement-based representations include sequence pair, bounded-sliceline grid, corner block list and slicing tree. With the dimensions of all the blocks known, the sequence pair and bounded-sliceline grid can be applied to general ﬂoorplans. The corner block list records the relative position of adjacent blocks, and is applicable to mosaic ﬂoorplan only. The slicing tree is for slicing ﬂoorplan, which is a special case of mosaic ﬂoorplan.

53.3.1

Sequence-Pair

Sequence-pair expresses the topological positions of blocks with a pair of block lists [5][18]. For each pair of blocks, there are four possible relations, left-right, right-left, above-below, and below-above. We use a pair of sequences {π1 , π2 } to record the order of the two blocks. We can record two blocks A, B in four diﬀerent orders: (AB, AB), (AB, BA), (BA, AB), (BA, BA). Hence, we use the four orders to represent the four placement relations. Fig. 53.20 shows the four possible relations between a pair of blocks A and B and the corresponding sequence pair for each relation. The two sequences can be viewed as two coordinate systems that deﬁne a grid placement

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-17

B

A

B

Left-right relation {π1= (A B), π2= (A B)}

A

Right-left relation {π1= (B A), π2= (B A)}

A

B

B

A Below-above relation {π1= (B A), π2= (A B)}

Above-below relation {π1= (A B), π2= (B A)}

FIGURE 53.20: Four possible relations between a pair of blocks.

of the blocks. To see it more clearly, we construct a grid system illustrated in Fig. 53.21. The slopes are denoted with the labels of blocks according to their orders in the two sequences. The intersections of two perpendicular lines that have the same label indicate the topological positions of the blocks.

g

h

c c

d h

g

g

h d

b

e

c

a f

d

e

e

b

f

c

g h

f

d

a

b

e e a

b

f

a

{cghdbeaf}{abcdefgh}

(a)

(b)

d

b a

{cghdbeaf}{abcdegfh} (c)

FIGURE 53.21: The grid system and the redundancy.

© 2005 by Chapman & Hall/CRC

c

g

f

h

53-18

Handbook of Data Structures and Applications

e

d

a

c

e

d

a

c g

f

g

f (a)

(b)

FIGURE 53.22: Derivation of sequence-pair.

The grid placement deﬁnes the ﬂoorplan relation between blocks. For each node in the grid placement, we divide the whole space into four quadrants, quadrant I: –45 to 45 degrees, quadrant II: 45 to 135, quadrant III: 135 to 225, quadrant IV: 225 to 315. Block B’s ﬂoorplan relation with block A can be derived from block B’s location in block A’s quadrants. 1. 2. 3. 4.

Quadrant Quadrant Quadrant Quadrant

I: block B is on the right of block A II: block B is above block A III: block B is on the left of block A IV: block B is below block A

For example, from the grid placement in Fig. 53.22, using node d as a reference, blocks e and f are on the right of block d; blocks g and h are above; blocks c is on the left; and blocks a and b are below. We can derive the sequence-pair from a ﬂoorplan by tracing the blocks through two directions. We ﬁrst extend the boundary of each block by drawing lines from its four corners (Fig. 53.22). In Fig. 53.22(a), we draw a line from the upper-right corner of each block that goes either rightward or upward. When the line is obstructed with a block or an already existing line, it changes its direction. The extension of the line ends when it reaches the boundary of the chip. We also draw a line from the lower-left corner of each block that goes either downwards or leftwards. The extended lines partition the chip into zones. Following the order of the zones, we get a label sequence. For instance, we have π1 = ecaf dg for Fig. 53.22(a). With similar operations, the second sequence is derived in the orthogonal direction (π2 = f cegad in Fig. 53.22(b)). π1 and π2 consist of a sequence-pair, which involves all the information of the topological positions of blocks. For translating a sequence-pair into a topological ﬂoorplan with n blocks, a brute force implementation requires time complexity O(n2 ), since there are O(n2 ) pairs of blocks and we need to scan all the pairs to get the constraint graph and then derive the ﬂoorplan by performing a longest path computation. In [8], a fast algorithm with O(nloglogn) time complexity is proposed to complete the transformation of a sequence pair to the ﬂoorplan. The fast algorithm takes advantage of the longest common sequence of the two sequences in a sequence-pair. They show that the longest common sequence calculation is equivalent to the longest path computation in the constraint graph for a sequence-pair. The authors use a priority queue data structure to record the longest common sequence, thus reduce the

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-19

time for calculating the position of a single block to O(loglogn) by amortizing. The representation of a sequence-pair has the following properties: 1. The number of bits for storing a sequence-pair is 2n log2 n, where n is the number of blocks in the placement. 2. The time complexity of translating a sequence-pair into a topological ﬂoorplan is n log2 log2 n by the newest report. 3. There are totally (n!)2 possible sequence-pairs for n blocks. However, there exists the redundancy. For example, the sequence-pairs in Fig. 53.21(a) and (c) actually correspond to the same placement (Fig. 53.21(b)).

53.3.2

Bounded-Sliceline Grid

Another method rising from the same idea as sequence-pair is BSG [6], where, instead of the intersections of grid lines, the squares surrounded by the grid lines, called rooms, are used to assign the blocks (Fig. 53.23). Although put forward aiming at the packing problem, BSG can also act as a compacting algorithm to determine the accurate positions of blocks. In BSG, grid lines are separated into vertical and horizontal segments (Fig. 53.23). Two constraint graphs are set up with their vertexes corresponding to the grid segments and their directed edges corresponding to the relative positions of the grid segments (Fig. 53.24). The vertexes ‘source’ and ‘sink’ are added to make the operation on the graph easy. Every room is crossed by one edge of the constraint graph (respectively in the vertical and horizontal constraint graphs). If the room is not empty, or there is a block assigned into the room, the crossing edge has a weight equal to the width (in the horizontal graph) or the height (in the vertical graph) of the assigned block, otherwise the crossing edge has a weight of zero. Fig. 53.24 shows the weights derived from the example in Fig. 53.23. By calculating the longest path lengths between the source and the other vertexes in the constraint graphs the real coordinates of the grid segments can be determined and in fact the translation to the placement is implemented. Table 53.4 gives the ﬁnal results of the example in Fig. 53.23 and Fig. 53.24. Notice that segment (1, 3) and (2, 2) have the same position, for the edge between the two vertexes in the horizontal constraint graph has the weight of zero. TABLE 53.4 Segment

Physical positions of segments.

0,1 0 Position (X or Y)Y

1,1 6 X

0,2 0 X

1,2 9 Y

1,3 8 X

0,3 12 Y

2,2 8 X

2,3 12 Y

3,3 17 X

3,2 4 Y

2,1 4 Y

2,0 6 X

3,1 17 X

3,0 0 Y

Due to the homology, BSG has the similar performance as sequence-pair, except that the complexity of the translation into placement, or ﬁnding the longest path lengths for all the vertexes in the constraint graphs, is O(pq), provided that the grid array has p columns and q rows.

53.3.3

Corner Block List

Corner block list is a third method of representing non-slicing structures [4][19][20]. Refer to Fig. 53.25. The ﬂoorplan is required to be mosaic and without degeneration. For every block, the T-junction at the bottom-left corner can be in either of the two directions. Accordingly we say the orientation of the block is 1 or 0 respectively. Now

© 2005 by Chapman & Hall/CRC

53-20

Handbook of Data Structures and Applications

room Segment (2,3) Segment (4,2)

a

d

a

d

b b

c (a)

a b c d

c

width height 8 3 6 9 11 4 9 8

(b) FIGURE 53.23: Basic structure of BSG.

sink

source

8

3

9 sink

6

8

9

11

4

source FIGURE 53.24: Constraint graphs. let’s observe the most upper-right blocks in Fig. 53.25(a) and (b), both denoted with ‘d’. If we push the bottom boundary of block ‘d’ in (a) upwards, or the left boundary in (b) rightwards, then block ‘d’ is squeezed and ﬁnally deleted (Fig. 53.25(c) and (d)), and thereafter block ‘a’ becomes the most upper-right block. The operation of squeezing and deleting can be repeatedly performed until there is only one block left in the placement. According to the order in which the blocks are squeezed out, we get two lists. The labels of blocks are stored in list ‘S’ while the orientations of the blocks in list ‘L’. For example,

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

d

e g

c

e

a

a

(a)

d g

c b

f

53-21

f

g

c b

(b)

d

e

e a

(c)

d g

c b

f

a

f

b (d)

FIGURE 53.25: Corner block list. for Fig. 53.25(a), S= ‘fcegbad’ and L= ‘001100’. S and L are not suﬃcient to recover the placement, so we need the third list, T . Each time we squeeze a block, we record the number of T-junctions on the moving boundary, excluding the two at its ends, then add the same number of ‘1’s and one ‘0’ into T . For example, in Fig. 53.25(a), when squeezing block d, we have T = ‘01’, for there is only one T-junction on the bottom boundary, which separates the blocks a, d and g. Next, while squeezing block a, only a ‘0’ is added to T , for there is no T-junction on the bottom boundary of block a. Consequently, we have T = ‘001’ after the deletion of block a, and T=‘00101001’ after the deletion of block c. With an inverse process, the placement can be recovered from S, L and T . The performance of corner block list is: 1. The storage of the 3 lists needs at most n(3 + logn) bits. 2. The number of combinations is T RIALREST RICT ION , which is the same as that of a slicing tree. However, slicing structure only covers part of all possible combinations, therefore has larger redundancy than corner block list. 3. The complexity of the translation between placement and lists is T RIALREST RICT ION .

53.3.4

Slicing Tree

A ﬂoorplan is call a slicing structure [7][29] if it can be iteratively partitioned into two parts with vertical or horizontal cut lines throughout the separated parts of the area, until the individual blocks. Fig. 53.26(a) gives an example. Line 1 splits the whole layout into two parts. The left half involves only one block but the right half can been further split by line 2. Then follows line 3, line 4, and so on. On the contrary, Fig. 53.26(b) is a non-slicing structure. We can’t ﬁnd a cut line throughout the ﬂoorplan to split it into two parts. Now that a slicing ﬂoorplan can been iteratively split into two parts with vertical or horizontal cut lines, a binary tree can be structured according to the splitting process.[13] Fig. 53.27 gives an example of a slicing ﬂoorplan and its binary tree. The inter nodes on the tree denoted with “H” or “V” indicate the direction of the line splitting the areas, while the leaf nodes correspond to the blocks. We call the binary tree a slicing tree. Just as in twin binary tree, we hope to ﬁnd a simple data structure to express the slicing tree. Polish Expression is a good solution. It is the result of a post-order traversal on the slicing tree. As an example, the Polish Expression of Fig. 53.27 is: 123V56V8H47HVHV. We regard “H” and “V” as operators and the blocks operands. Formally, we have the following deﬁnition for a Polish expression: A sequence b1 b2 . . . b 2n 1 of elements from {1, 2, . . . , n, V,H} is a Polish expression of

© 2005 by Chapman & Hall/CRC

53-22

Handbook of Data Structures and Applications

3 1

2 4

5

6

(a)

(b)

FIGURE 53.26: Slicing structure and non-slicing structure.

V 2 1

4 7

3 5 8

1

H V

6 2

V 3

V

(a)

H

H 8

4

7 (b)

5

6

FIGURE 53.27: Slicing structure and its binary tree representation. length 2n − 1 iﬀ: 1. Every subscript i appears exactly once in the sequence, 1≤i≤ 2n-1. 2. The number of operators is less than the number of the components for any preﬁx sub-string. So needless to re-construct the slicing tree, we are able to judge a legal Polish Expression. For example, 21H57V43H6VHV and 215H7V43H6VHV are legal Polish Expressions while 215HVHV7436HV and 2H15437VVVHH are not. An illegal Polish Expression can’t be converted to a binary tree. It is obvious that for a given slicing tree, we have a unique Polish Expression. Inversely, we can easily conduct the slicing tree according to its Polish Expression. So we conclude that there is a one-to-one correspondence between the slicing tree and Polish Expression. However, there may be more than one slicing tree corresponding to one ﬂoorplan, as shown in Fig. 53.28. Thus there exists redundancy. To compact the solution space, we deﬁne the skewed slicing tree to be a slicing tree without a node that has the same operator as its right son. Correspondingly, a normalized Polish expression is deﬁned: A Polish expression b1 b2 . . . b 2n−1 is called to be normalized iﬀ there is no consecutive “V” or “H” in the sequence. In Fig. 53.28, (b) is a normalized Polish expression while (c) is not. There is a one-toone correspondence between the set of normalized Polish expressions and the set of slicing structures.

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

1

2

53-23

V

3 V

V

1

12V3V

2

V

1

3

2

(c)

(b)

(a)

123VV

3

FIGURE 53.28: Redundancy of slicing trees. To perturb the blocks to get new solutions, we deﬁne three types of perturbations on polish expressions: M1: Swap two adjacent operands. For example, 12V3H →13V2H ; M2: Complement some chain of operators. For example, 12V3H→12V3V ; M3: Swap two adjacent operand and operator. For example, 12V3H→123VH ;

5 3 1

5 4

2

4 M1

12V3H4V5H 3

1

3 2

5

4

5 4

M3

12V4H3V5H

4 1

3

1

2

12V4H35VH

5

5

4

3

3 2

12V43H5VH

M3

1

2

M2

12V435HVH

2 1 12H435HVH

FIGURE 53.29: Slicing structure moves.

The operation of M3 may result in a non-normalized Polish Expression. So a check is necessary after an operation of M3 to guarantee that a normalized expression is generated. Fig. 53.29 illustrates two sequences of polish expression transformations as well as their corresponding ﬂoorplans. We can see that a slight modiﬁcation on the Polish Expression can result in a completely diﬀerent ﬂoorplan topology. This is just what we want. Finally, we analyze the performance of slicing tree. 1. Given a ﬂoorplan of n blocks, the slicing tree contains n leaves and n − 1 internal nodes. 2. The number of possible conﬁgurations for the tree is O(n!·2 3n−3 ·n 1.5 ). 3. The storage of a Polish Expression needs a 3n-bit stream plus a permutation of n blocks.

© 2005 by Chapman & Hall/CRC

53-24

Handbook of Data Structures and Applications

4. It will take linear time to transform a ﬂoorplan into a slicing tree, and vice versa.

53.4

Relationships of the Representations

We summarize the relationships between the representations in this section. A mosaic ﬂoorplan example and a general ﬂoorplan example are also discussed in detail to show the relationships.

53.4.1

Summary of the Relationships

According to the deﬁnitions of the representations, we have four relationships between the sequence-pair (SP), the corner block list (CBL), the twin binary tree (TBT) and the O-Tree representations. For further discussions, we ﬁrst deﬁne the 90˚ rotation of a ﬂoorplan as follows: Definition 90˚ rotation of a floorplan: We use F90 to denote the ﬂoorplan obtained by rotating ﬂoorplan F, 90 degrees counterclockwise.

SP (S1, S2)

CBL (S, L, T) 900 sequence

TBT ( τ + , τ -)

O-tree T tree transform

FIGURE 53.30: Summary of the relationships between ﬂoorplan representations.

The four relationships are as follows and summarized in Fig. 53.30. 1. Given a mosaic ﬂoorplan and its corresponding corner block list CB=(S, L, T), there exists a sequence pair SP = (S 1 , S2 ) corresponding to the same ﬂoorplan such that the second sequence of SP is same as the sequence S of the corner block list. 2. Given a mosaic ﬂoorplan and its corresponding twin binary trees (τ + ,τ − ), there exists a sequence pair SP = (S 1 , S2 ) corresponding to the same ﬂoorplan such that the ﬁrst sequence of SP is the same as the node sequence of in-order traversal in tree τ + . 3. Given a mosaic ﬂoorplan and its corresponding twin binary trees TBT ( τ + ,τ − ), there exists an O-tree corresponding to the same ﬂoorplan such that τ − is identical to the O-tree after the tree conversion from a binary tree to an ordered tree. 4. Given a mosaic ﬂoorplan F , and its corresponding twin binary trees TBT ( τ + ,τ − ), the node sequence of in-order traversal in tree τ + is identical to the sequence S in the corner block list CB=(S, L, T) of the ﬂoorplan F90 .

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-25

C

Twin Binary trees:

B C

F E

B

A

1

A

D

1

E

A

E D

D

0

F

0

1

B

F 1

C

0 0

τ+

Θ( τ+) = 11001 O-tree:

B C

A D

0

1 τ

Θ( τ ) = 00110

Corner Block List: S = (FADEBC), L = ( 01101), T = (0010100)

F E

Sequence Pair: SP1 = (S1, S2) = (ABCDFE, FADEBC). Also SP 2 = (S1,S2) = (ABCDFE, FAD BEC) refers to the same floorplan

FIGURE 53.31: A mosaic ﬂoorplan and its diﬀerent representations.

53.4.2

A Mosaic Floorplan Example

Fig. 53.31 describes an example of a mosaic ﬂoorplan. We illustrate the four representations. The twin binary trees are marked with circles and crosses as shown in Fig. 53.31. Two SP s, SP1 and SP2, out of many possible choices, are described in the ﬁgure. The in-order traversal of the τ + in the twin binary trees representation produces the sequence π(τ + ) = ABCDFE, which is same as the ﬁrst sequence of SP1 and SP2. In Fig. 53.31, an O-tree representation is also given. Its binary tree representation is identical to the τ − of the twin binary trees after tree conversion. The corner block list representation is next to the O-tree representation in Fig. 53.31. Its sequence S=FADEBC is same as the second sequence of SP1. Fig. 53.32 shows the 90˚ rotation of the mosaic ﬂoorplan in Fig. 53.31. The CB (S,L,T) representation of F90 has S = ABCDFE (Fig. 53.32.), which is identical to π(τ ), the order of the twin binary trees representation (τ +, τ − ) of the ﬂoorplan in Fig. 53.31.

53.4.3

A General Floorplan Example

Fig. 53.33 illustrates a general ﬂoorplan. Only the O-tree and the sequence pair are capable of representing this general ﬂoorplan. The O-tree and SP representations are shown in the ﬁgure.

© 2005 by Chapman & Hall/CRC

53-26

Handbook of Data Structures and Applications

C

E D

Corner Block List Representation of F90 S=(ABCDFE); L=(00110); T=(00010101);

F

B A

FIGURE 53.32: 90˚ rotation of the ﬂoorplan in Fig. 58.31.

O-tree:

B

A

A

B F

F

D

C

D

E C

E Sequence Pair: SP1=(Г+, Г-) = (FBADEC, EFDBCA), Also, SP2=(Г+, Г-) = (FBADEC, EDFBCA)

FIGURE 53.33: A general ﬂoorplan with its O-tree and SP representation.

(a)

(b)

(c)

(d) FIGURE 53.34: Shape handling.

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53.5

53-27

Rectilinear Shape Handling

Shape handling makes feasible the treating of blocks with arbitrary shapes. It makes sense especially in deep sub-micron technology, where, with the number of routing layers increasing, wires are placed in layers other than the device layer, and the placement becomes more like a packing problem: a set of macro blocks are packed together without overlaps, with some objective functions minimized. The basic idea to handle the arbitrary-shaped blocks is to partition them into rectangles, and then the representations and the optimizing strategies described above can be used. Fig. 53.34(a) and (b) demonstrate two schemes of partitioning, the horizontal one and the vertical one. However, if the generated rectangle blocks were treated as individual ones, it would be quite impossible to recover the original blocks. The generated rectangle blocks may be shifted (Fig. 53.34(c)) or separated (Fig. 53.34(d)). So extra constraints have to be imposed on the generated rectangle blocks in order to keep the original blocks’ shapes.

3 d 1 3

1

a

c

1

e

4

b 1 5 (a)

d

1

d

-1

-1 c

2 1 a

-2 b

-1

1 5

1 e

-5 (b)

1 c

a

-1 b

-1 e

-1

1 (c)

FIGURE 53.35: An example of adding extra constraints.

One proposed method of adding extra constraints is illustrated with Fig. 53.35(b) for horizontal and (c) for vertical. The vertexes in the constraint graph correspond to the generated rectangle blocks, while the direct edges denote the relative positions of the blocks. For example, an edge from ‘a’ to ‘b’ with a weight of 1 means that block ‘b’ lies to the right of ‘a’, the distance between their left boundaries is 1, which is exactly the width of ‘a’.

© 2005 by Chapman & Hall/CRC

53-28

Handbook of Data Structures and Applications

Because the relative-position constraints are always represented with the format such as “larger than or equal to” during optimization, inversely directed edges, such as the edge from ‘b’ to ‘a’ with a negative weight, helps to determine the position relationships solely.

53.6

Conclusions

Floorplan representation is an important issue for ﬂoorplan optimization. We classify the representations into graph based and placement based methods based on the diﬀerent strategies used in deriving the representations. The graph-based methods are based on the constraint graphs, which include the constraint graphs, the corner stitching, the twin binary tree and the O-tree. The placement-based methods are based on the local topology relations in deriving the ﬂoorplans, which include the sequence pair, the bounded sliceline grid, the corner block list and the slicing tree. The ﬂoorplans can also be classiﬁed into diﬀerent categories: general, mosaic and slicing ﬂoorplans. Slicing ﬂoorplan is a subset of mosaic ﬂoorplan, which is again a subset of the general ﬂoorplan. We have diﬀerent representations for diﬀerent types of ﬂoorplans. The constraint graphs, the corner stitching, the sequence pair, the bounded sliceline grid and the O-trees are for general ﬂoorplans. The twin binary tree and the corner block list are for mosaic ﬂoorplans. The slicing tree is for slicing ﬂoorplans. Diﬀerent representations have diﬀerent solution spaces and time complexities to derive a ﬂoorplan.

53.7

Acknowledgment

The authors are grateful to Mr. Simon Chu of Sun Microsystems for his thorough review of the chapter.

References [1] Y. Chang, G. Wu, and S. Wu, “B*-Trees: A New Representation for Non-Slicing Floorplans”, in Proc. 37th DAC, 2000, pp. 458-463. [2] P. Guo, C.K. Cheng, and T. Yoshimura, “An O-Tree Representation of Non-Slicing Floorplan and Its Applications,” in Proc. 36th DAC, 1999, pp. 268-273. [3] Y. Pang, C.K. Cheng, K. Lampaert, W. Xie, “Rectilinear block packing using O-tree representation,” in Proc. ISPD 2001, pp. 156-161. [4] X. Hong, G. Huang, Y. Cai, J. Gu, S. Dong, C.K. Cheng, J. Gu, “Conner Block List: An Eﬀective and Eﬃcient Topological Representation of Non-Slicing Floorplan,” in Proceeding of ICCAD-2000, 2000, pp. 8-12. [5] H. Murata, K.Fujiyoushi, S. Nakatake and Y. Kajitani, “Rectangle-packing-based Module Placement”, in Proc. of International Conference on Computer Aided Design, 1995, pp. 472-479. [6] S. Nakatake, K.Fujiyoshi, H. Murata, and Y. Kajitani, “Module Packing Based on the BSG-Structure and IC Layout Applications”, in IEEE Trans. on Computer-Aided Design of Integrated Circuits and Systems, Vol. 17, No. 6, June 1998, pp. 519-530. [7] R.H.J.M.Otten, “Automatic Floorplan Design”, in Proc. ACM/IEEE Design Automation Conf., 1982, pp. 261-267. [8] X. Tang, M. Wong, “FAST-SP A Fast Algorithm for Block Placement based on Sequence Pair”, in Proc. of Asia and South Pacific Design Automation Conference, Yokohama, Japan, Jan. 2001, pp. 521-526. [9] D. E. Knuth, The Art of Computer Programming, Addison-Wesley Press, 1997.

© 2005 by Chapman & Hall/CRC

Floorplan Representation in VLSI

53-29

[10] R.H.J.M. Otten, “What is a Floorplan?” in Proc. of International Symposium on Physical Design, 2000, pp. 212-217. [11] J. Grason, “ A Dual Linear Graph Representation for Space-ﬁlling Location Problems of the Floor-planning Type, ” MIT Press, Cambridge (Mass), USA, 1970. [12] K. Kozminsky and E. Kinnen, “ Rectangular Duals of Planar Graph, ” in Networks, 15, 1985, pp. 145-157. [13] A.A. Szepieniec and R.H.J.M. Otten, “The Genealogical Approach to the Layout Problem,” in Proc. of the 17th Design Automation Conference, 1980, pp. 535-542. [14] K. Sakanushi, and Y. Kajitani, “The Quarter-State Sequence (Q-sequence) to Represent the Floorplan and Applications to Layout Optimization,” in Proc. IEEE APCCAS, 2000, pp. 829-832. [15] B. Yao, H. Chen, C.K. Cheng, and R. Graham, “Revisiting Floorplan Representations,” in Proc. International Symposium on Physical Design, 2001, pp. 138-143. [16] F.Y. Young, C.N. Chu and Z.C. Shen, “Twin Binary Sequences: A Non-redundant Representation for General Non-slicing Floorplan,” in Proc International Symposium on Physical Design, 2002, pp.196-201. [17] J. Ousterhoust, “Corner stitching: A data-structuring technique for VLSI layout tools,” IEEE Transactions on Computer-Aided Design, CAD-3, January 1984, pp. 87-100. [18] J. Xu, P. Guo, C.K. Cheng, “Sequence-Pair Approach for Rectilinear Module Placement,” IEEE Trans. on CAD, April 1999, pp. 484-493. [19] S. Zhou, S. Dong, X. Hong, Y. Cai, J. Gu, and C.K. Cheng, “ECBL: An Extended Corner Block List with O(n) Complexity and Solution Space Including Optimum Placement,” Int. Symp. on Physical Design, 2001, pp. 150-155. [20] Y. Ma, X. Hong, S. Dong, Y. Cai, C.K. Cheng, J. Gu, “Floorplanning with Abutment Constraints and L-Shaped /T-Shaped Blocks Based on Corner Block List,” ACM/IEEE Design Automation Conf., 2001, pp. 770-775. [21] J. Xu, P. Guo, C.K. Cheng, “Cluster Reﬁnement for Block Placement”, Proc. ACM/IEEE Design Automation Conf., 1997, pp. 762-765. [22] J. Xu, P. Guo, C.K. Cheng, “Empirical Study of Block Placement by Cluster Reﬁnement,” VLSI Design, vol.10, no.1, pp. 71-86. [23] M. Abe, “Covering the square by squares without overlapping (in Japanese),” J. Japan Math. Phys., vol. 4, no. 4, 1930, pp. 359–366. [24] K. Sakanushi, Y. Kajitani, D. P. Mehta, “The Quarter-State-Sequence Floorplan Representation,” in IEEE Trans. on Circuits and Systems—I, vol. 50, no. 3, 2003, pp. 376-385. [25] J.M. Lin, Y.W. Chang, “TCG: A Transitive Closure Graph-Based Representation for Non-Slicing Floorplans,” in Proc. DAC, 2001, pp. 764-76 [26] W. Dai, and E.S. Kuh, ”Hierarchical Floor Planning for Building Block Layout,” IEEE Int. Conf. on Computer-Aided Design, pp.454-457, 1986. [27] R.L. Brooks, C.A.B. Smith, A.H. Stone, and W.T. Tutte, ”The Dissection of Rectangle into Squares,” Duke Math, Journal, vol. 7, pp. 312-340, 1940. [28] C. Zhuang, K. Sakanushi, J. Liyan, Y. Kajitani, “An Enhanced Q-Sequence Augmented with Empty-Room-Insertion and Parenthesis Trees,” Design Automation and Test in Europe Conference and Exhibition, pp.61-68, 2002. [29] D.F. Wong and C.L. Liu, “A New Algorithm for Floorplan Design,” ACM/IEEE Design Automation Conf., pp.101-107, 1986.

© 2005 by Chapman & Hall/CRC

54 Computer Graphics 54.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54-1

Hardware and Pipeline

54.2

Basic Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Meshes • CAD/CAM Drawings Texture Mapping

54.3

Alyn Rockwood Colorado School of Mines

54.1

Fonts

•

Bitmaps

54-2

•

Data Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54-7

Vertices, Edges, and Faces • Vertex, Normal, and Face Lists • Winged Edge • Tiled, Multidimensional Array • Linear Interpolation and Bezier Curves

Dale McMullin Colorado School of Mines

•

54.4

Applications of Previously Discussed Structures 54-15 Hidden Surface Removal: An Application of the BSP Tree • Proximity and Collision: Other Applications of the BSP Tree • More With Trees: CSG Modeling

Introduction

Like all major applications within the vast arenas of computer science and technology, the computer graphics industry depends on the eﬃcient synergy of hardware and software to deliver to the growing demands of computer users. From computer gaming to engineering to medicine, computer graphics applications are pervasive. As hardware capabilities grow, the potential for new feasible uses for computer graphics emerge. In recent years, the exponential growth of chipset speeds and memory capacities in personal computers have made commonplace the applications that were once only available to individuals and companies with specialized graphical needs. One excellent example is ﬂight simulators. As recently as twenty years ago, an aviation company would have purchased a ﬂight simulator, capable of rendering one thousand shaded polygons per second, for ten million dollars. Even with a room full of processing hardware and rendering equipment, it would be primitive by today’s graphics standards. With today’s graphics cards and software, one renders tens of millions of shaded polygons every second for two hundred dollars. As the needs for graphics applications grow and change, research takes the industry in many diﬀerent directions. However, even though the applications may evolve, what happens under the scenes is much more static; the way graphics primitives are represented, or stored in computer memory, have stayed relatively constant. This can be mainly attributed to the continued use of many standard, stable data structures, algorithms, and models. As this chapter will illustrate, data and algorithmic standards familiar to computer science lend themselves quite well to turning the mathematics and geometries of computer graphics into impressive images.

54-1

© 2005 by Chapman & Hall/CRC

54-2

54.1.1

Handbook of Data Structures and Applications

Hardware and Pipeline

Graphics hardware plays an important role in nearly all applications of computer graphics. The ability for systems to map 3–D vertices to 2–D locations on a monitor screen is critical. Once the object or “model” is interpreted by the CPU, the hardware draws and shades the object according to a user’s viewpoint. The “pipeline” [2], or order in which the computer turns mathematical expressions into a graphics scene, governs this process. Several complex sub-processes deﬁne the pipeline. Figure 54.1 illustrates a typical example.

FIGURE 54.1: Graphics pipeline.

The Model View is the point where the models are created, constructed as a combination of meshes and mapped textures. The Projection point is where the models are transformed (scaled, rotated, and moved) through a series of aﬃne transformations to their ﬁnal position. Clipping involves invoking algorithms to determine perspective, and what objects are visible in the Viewport. The Viewport readies the scene for display on the computer’s monitor. The ﬁnal scene is “rasterized” to the monitor [2]. Standard data structures and algorithms apply to all steps in the pipeline process. Since the speed of most rendering hardware (and hence the pipeline) is directly dependent on the number of models to be drawn, it becomes important to utilize structures that are as eﬃcient as possible. In fact, graphics hardware is often designed and engineered to cater to a speciﬁc, standard form of data representation.

54.2 54.2.1

Basic Applications Meshes

In both 2-D and 3-D applications, objects are modeled with polygons and polygon meshes. The basic elements of a polygon mesh include the vertex, the edge, and the face. An edge is composed of the line segment between two vertices, and a face is deﬁned by the closed polygon of three or more edges. A mesh is formed when two or more faces are connected by shared vertices and edges. A typical polygon (triangle) mesh is shown in Fig. 54.2.

© 2005 by Chapman & Hall/CRC

Computer Graphics

54-3

FIGURE 54.2: A triangle mesh. Speciﬁc examples of meshes include “triangle meshes, polygon meshes, and polygon meshes with holes.” [1] However, the triangle is currently the most popular face geometry in standard meshes. This is mainly because of its simplicity, direct application to trigonometric calculations, and ease of mesh storage (as we will see).

54.2.2

CAD/CAM Drawings

In Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), and other channels of engineering design, we see the same basic elements. During the design process of everything from automobiles to telephones, applications are used to “see” the parts before they are manufactured. The physical interactions and assemblies of parts can be tested before any steel is milled or plastic is poured. Figure 54.3 illustrates a wire-frame (and fully rendered) model of a drill bit used in the oil and gas industry. Every modeled element of this design requires a deﬁnition of vertices and edges. These vertices deﬁne single-line edges, polyline edges, and the curved edges. The proximity of vertices to edges, edges to edges, and vertices to vertices may be tested for tolerances and potential problems. The software makes the stored model visible to the user within the current coordinate system and viewpoint. It is then up to the user to interface the visual medium with his or her engineering (or design) training to create a useful design. Even in wire frame models, we see the application of more sophisticated graphics practices. Note how many of the contours of the drill bit parts are not connected line segments, but actual smooth curves. This is an example of where vertices have been used not to deﬁne edges, but the “control points” of a Bezier Curve. How curves like the B-Spline and Bezier utilize vertices in their structures is discussed later in this chapter. For now it is suﬃcient to mention that these types of curves are present in nearly all corners of the graphics industry.

54.2.3

Fonts

Fonts are another example of where the vertex is used, in two dimensions, as the basis of a data structure in order to deﬁne the appearance of each character and number in various languages. Several examples of interesting Greek characters, each deﬁned by a diﬀerent font deﬁnition ﬁle, and at diﬀerent sizes, are shown in Figure 54.4.

© 2005 by Chapman & Hall/CRC

54-4

Handbook of Data Structures and Applications

FIGURE 54.3: Models of a drill bit.

FIGURE 54.4: Fonts. The typical Postscript font is deﬁned by a number of points, read in as control points for each curve (or line) in the font character. The “Postscript” driver software is then used to interpret the control points and render the characters with Bezier curves (see section 3.5). Perhaps the most important concept is that each pixel of the font character does not have to be stored, only a small number of vertex deﬁnitions. As the control points are transformed through operations like italicizing, the curves remain aligned in the proper proportion to the original character. Note the “M” character in the above ﬁgure has been italicized. The “Postscript” font representation serves as a very eﬀective example of how a single standardized data structure of speciﬁc size can be utilized to deﬁne a potentially inﬁnite number of characters.

54.2.4

Bitmaps

Bitmaps are a cornerstone to computer graphics. In fact, the name “bitmap” has become a commodity to most computer users in the way that it describes a computer generated picture. A bitmap is a very simple, yet versatile, way to store a graphic image as a binary ﬁle. The ﬁle header structure of a bitmap [6] in itself is a standard data structure, as the following illustrates: struct _BITMAP { Uint8 bmType; Uint8 bmBitsPerPixel; Uint8 bmBytesPerPixel; Uint8 bmReserved;

© 2005 by Chapman & Hall/CRC

Computer Graphics Uint32

bmColorKey;

Uint32 Uint32 Uint32

bmWidth; bmHeight; bmPitch;

void* };

bmBits;

54-5

The bitmap is initially deﬁned by a number of parameters that deﬁne the type, width, height, etc. of the graphic image. These properties are stored in the header of the ﬁle as shown. The actual “pixels” required to ﬁll that space is then deﬁned in the “bmBits” pointer. As a rule, the total number of pixels in the image memory will equal the width times the height divided by the “bits per pixel” property. The “bytes per pixel” property determines how the “bits per pixel” are divided among the individual color components of each pixel. For instance, a bitmap with RGB color map is commonly deﬁned by twenty four (24) bits per pixel and three (3) bytes per pixel. Each of the three bytes for each pixel use 8 of the twenty four bits to deﬁne red, green, and blue values respectively. Early bitmaps, when color monitors were ﬁrst being used, were deﬁned with 4-bit color. In other words, each color was deﬁned by a 4-bit (or half-byte) word. Since a half-byte has a maximum value of 24 or 16, 4-bit bitmaps were capable of supporting sixteen (16) diﬀerent colors. The required disk space to store a 100 x 100 4-bit bitmap would then be 10000 * .5 bytes or 5000 Bytes (5kB). In the past ﬁfteen years, the need for more realistic graphics has driven the increase in the memory used for color. Today 24-bit (also called true color) and 32-bit color, which both represent 16.7 million colors (32-bit adds an extra byte for the alpha channel), are the most commonly supported formats in today’s hardware. The alpha channel refers to a single byte used to store the transparency of the color. Bitmap ﬁles in these formats now require 3 and 4 bytes per pixel. Additionally, current monitor resolutions require over 1000 pixels in width or height, and thus graphic ﬁles are growing even larger. Figure 54.5 is a photograph that has been scanned in and stored as a bitmap ﬁle. A typical 5x7 photograph, at 100 dpi (dots per inch), and 24-bit color, would require 500 x 700 x 3 or 1.05 megabytes (MB) to store in a conventional bitmap format. Because of the increased size requirements in bitmaps, compression algorithms have become commonplace. File formats such as JPG (jpeg) and PNG (ping) are examples of widely used formats. However, there is a tradeoﬀ. When a compression algorithm is applied to a bitmap, a degree of image quality is inevitably lost. Consequently, in applications like publishing and graphic art, uncompressed bitmaps are still required where high image quality is expected.

54.2.5

Texture Mapping

The processes of texture and surface mapping represent an application where bitmaps and polygonal meshes are combined to create more realistic models. Texture mapping has become a cornerstone of graphics applications in recent years because of its versatility, ease of implementation, and speed in graphical environments with a high number of objects and polygons. In fact, today’s graphics hardware ships with the tools necessary to implement the texture and surface mapping processes on the local chipset, and the data structures used in rendering environments are largely standardized. Prior to texture mapping, 3-D polygonal meshes were processed through shading models such as Gouraud and Phong to provide realism. Each shading model provides the means

© 2005 by Chapman & Hall/CRC

54-6

Handbook of Data Structures and Applications

FIGURE 54.5: Bitmap ﬁle. for providing color, shadows, and even reﬂection (glare) to individual components of the model. This was accomplished through a mathematical model of how light behaves within specular, diﬀuse, reﬂective, and refractive contexts. The general shading equation for light intensity, I, based on the individual ambient, diﬀuse, and specular components is shown below. I = Ia pa + (Id pd × lambert) + (Is ps × phong) where: s·m lambert = max 0, |s||m| h·m phong = max 0, |h||m| pa = ambient coeﬃcient0 ≤ pa ≤ 1 pd = diﬀuse coeﬃcient0 ≤ pd ≤ 1 ps = specular coeﬃcient0 ≤ ps ≤ 1 The primary diﬀerence between Gouraud and Phong is in that Phong provides the additional component for specular reﬂection, which gives objects a more realistic glare when desired. Also, because the Phong model requires more detail, the intensity values are calculated (interpolated) at each pixel rather than each polygon. The vectors m, s, and h represent the normal, reﬂected, and diﬀuse light from a given polygonal surface (or face). Linear interpolation, a widely used algorithm in graphics, is discussed in Section 3.5. Although still used today, these shading models have limitations when more realistic results are desired. Because color and light reﬂection are modeled on individual model components, the model would have to be constructed as a composite of many diﬀerent components, each with diﬀerent color (or material) properties, in order to achieve a more realistic eﬀect. This requires models to be much more complex, and increasingly diﬃcult to construct. If changes in surface appearance or continuity were desired, they would have to be physically modeled in the mesh itself in order to be viewed. Texture and surface mapping have provided a practical solution to these model complexity dilemmas. The mapping methods involve taking the input from a bitmap ﬁle, like those described previously, and “stretching” them over a polygonal mesh. The end result is a

© 2005 by Chapman & Hall/CRC

Computer Graphics

54-7

meshed object.which takes on the texture properties (or appearance) of the bitmap. The ﬁgure below illustrates a simple example of how the mesh and bitmap can be combined to create a more interesting object. Figure 54.6 shows how how Figure 54.5 has been “mapped” onto a sphere.

FIGURE 54.6: Combination of mesh and bitmap.

The object seems to take on a more realistic appearance even when modeled by a very simple polygonal mesh. This technology has made fast rendering of realistic environments much more feasible, especially in computer games. Texture, or “bump”, mapping utilizes a similar process as surface mapping, where a bitmap is stretched over a polygonal mesh. However, the pixels, commonly called “texels” [2], are used to alter how the light intensity interacts with the surface. Initially, the lighting model shown above would calculate an intensity, I, for a given surface. With texture mapping, individual grayscale values at each texel are used to alter the intensity vectors across each polygon in order to produce roughness eﬀects. Figure 54.7 illustrates a model of a sphere that has been rendered with the traditional Gouraud model, then Phong, and then ﬁnally rendered again with a texture map. This approach to improving model realism through mapping applies also to reﬂection, light intensity, and others.

54.3 54.3.1

Data Structures Vertices, Edges, and Faces

As mentioned previously, vertices, edges, and faces form the most basic elements of all polygonal representations in computer graphics. The simplest point can be represented in Cartesian coordinates in two (2D) and three dimensions (3D) as (x,y) and (x,y,z) respectively (Figure 54.8).

© 2005 by Chapman & Hall/CRC

54-8

Handbook of Data Structures and Applications

FIGURE 54.7: Texture mapping.

FIGURE 54.8: Vertices, edges, and faces.

As a simple data structure, each vertex may then be stored as a two or three-dimensional array. Edges may then be represented by two-dimensional arrays containing the indexes of two points. Further, a face may be dimensioned based on the number of desired sides per face, and contain the indices of those edges. At ﬁrst, this approach may seem acceptable, and in basic applications it is common to model each vertex, edge, and face as a separate class. Relative relationships between classes are then governed by the software to build meshes. However, modeling objects in this manner does have disadvantages. Firstly, important information becomes diﬃcult to track, such as the normal at each vertex, adjacency of faces, and other properties required for blending and achieving realism. Furthermore, the number of intersecting edges at each vertex may vary throughout the model, and mesh sizes between objects may be unpredictable. The ability to manage this approach then becomes increasingly diﬃcult, with the potential for unnecessary overhead and housekeeping of relationships within the model. It then becomes necessary to create higher level data structures that go beyond these basic elements, and provide the elements necessary for eﬃcient graphics applications.

© 2005 by Chapman & Hall/CRC

Computer Graphics

54.3.2

54-9

Vertex, Normal, and Face Lists

In this storage method, list structures are used to store three, inter-dependent lists of data. The ﬁrst list deﬁnes the vertexes contained in the scene as follows. Each vertex is assigned an index, and a coordinate location, or (x,y,z) point. The second list deﬁnes the normals for each vertex. Again, each normal is assigned a numbered index and a 3-D coordinate point. The ﬁnal list serves to integrate the ﬁrst two. Each face is identiﬁed by a numbered index, an array of vertex indexes, and an array of indexed normals for each vertex. Figure 54.9 illustrates typical examples of a similar application with vertex, face, and edge lists.

FIGURE 54.9: Example of vertex, normal, and face lists.

In the table, three speciﬁc lists are evident. The ﬁrst list represents each vertex in the model as it is deﬁned in 3D space. The “vertex” column deﬁnes the id, index, or label of the vertex. The x, y, and z coordinates are then deﬁned in the adjacent columns. In the second list, six faces are deﬁned. Each face has a label or index similar to the vertex list. However, rather than specifying coordinates in space, the adjacent column stores the id’s of the vertexes that enclose the face. Note that each face consists of four vertices, indicating that the each face will be deﬁned by a quadrilateral. The ﬁnal list deﬁnes edges. Again, each edge deﬁnition contains a label or index column, followed by two adjacent vertex columns. The vertices of each edge deﬁne the start point and end point of each edge. In many applications of graphics, it is important to deﬁne the direction of an edge. In right handed coordinate systems, the direction of an edge will determine the direction of the normal vector which is orthogonal to the face surrounded by the edges.

54.3.3

Winged Edge

Although one of the oldest data structures relating to polygonal structures, the Winged Edge approach is very eﬀective, and still widely used [5]. This structure is diﬀerent from the wireframe model in that edges are the primary focal point of organization. In the structure, each edge is stored in an indexed array, with its vertices, adjacent faces, previous, and successive edges. This allows the critical information for each edge to be stored in an array of eight integer indexes; it is both consistent and scalable between applications. The structure is

© 2005 by Chapman & Hall/CRC

54-10

Handbook of Data Structures and Applications

FIGURE 54.10: Winged edge table. Figure 54.11 illustrates a typical layout for a winged edge.

FIGURE 54.11: Winged edge.

An important aspect of the Winged Edge structure is the order in which entries are listed. The edge itself has a direction, from the start vertex to the end vertex. The other entries are then deﬁned by their proximity to the edge. If the direction of the edge were reversed, the right and left faces would change accordingly, as would the previous and succeeding entries of both the left and right traverse. There is a time/space trade-oﬀ in using this model. What is saved in storage space adds to the needed time to ﬁnd previous and successive edges. See Chapter 17 for more details.

54.3.4

Tiled, Multidimensional Array

In this section we will discuss a data structure that is important to most geometric implementations. In many ways, the tiled array behaves identically to matrix data structures. For instance, a p by q matrix is normally stored as a single dimension array. However, since the matrix has p-rows and q-columns, the array needs to be addressed by creating an “oﬀset” of size q in order to traverse each row. The following example should illustrate this concept. Consider a matrix with p = 3 rows and q = 3 columns: is stored as: A = [1, 3, 4, 5, 2, 7, 3, 9, 3]

© 2005 by Chapman & Hall/CRC

Computer Graphics

54-11

This represents where a 3x3 matrix is stored as an array with (3)(3) = 9 entries. In order to ﬁnd the entry at row(i) = 3 and column(j) = 2 we employ the following method on the array: Entry = j + (i − 1)q Or in this case, Entry = A[2 + (3 − 1)(3)] = A[8] = 9 We use a similar method for tiling a single bitmap into several smaller images. This is analogous to each number entry in the above array being replaced by a bitmap with n by n pixels. “Utilizing cache hierarchy is a crucial task in designing algorithms for modern architectures.”[2] In other words, tiling is a crucial step to ensuring multi-dimensional arrays are stored in an eﬃcient, useful manner. Indexing mechanisms are used to locate data in each dimension. For example, a p by q array is stored in a one-dimensional array of length p*q, and indexed in row-column fashion as above. When we wish to tile a p by q matrix into n by n tiles, the number of blocks in x is deﬁned by q/n and the number of blocks in y is deﬁned by p/n. Therefore, to ﬁnd the “tile index” or the row and column of the tile for a value (x,y) we ﬁrst calculate the tile location, or bitmap within the matrix of bitmaps. Then once the bitmap is located, the pixel location within that bitmap tile is found (sub-indexed). The entire two-step process can be simpliﬁed into a single equation that is executed once. Figure 54.12 illustrates this concept.

FIGURE 54.12: Tiled array.

The ﬁnal formula for locating x,y in a p by q array divided into n,n tiles is: n2 nq ny + nx + (y mod n)n + (x mod n)

© 2005 by Chapman & Hall/CRC

54-12

Handbook of Data Structures and Applications

When dealing with matrices and combining multiple bitmaps and/or data into a Tile Multidimensional Array, performance and speed can both improve substantially.

54.3.5

Linear Interpolation and Bezier Curves

This section will introduce one of the most signiﬁcant contributions to design and graphics: the interpolated curve structure. Linear interpolation refers to the parameterization of a straight line as a function of t, or: L(t) = (1 − t)a + tb where a, b are points in space. This equation represents both an aﬃne invariant and barycentric combination of the points a and b. Aﬃne invariance means that the point L(t) will always be collinear with the straight line through the point set {a, b}, regardless of the positioning of a and b. Describing this set as barycentric simply means that for t values between 0 and 1, L(t) will always occur between a and b. Another accurate description is that the equation L(t) is a linear “mapping” of t into some arbitrary region of space. Figure 54.13 illustrates this concept.

FIGURE 54.13: Linear interpolation.

Linear interpolation is an extremely powerful concept. It is not only the foundation of many curve approximation algorithms, but the method is also used in many non-geometric applications as well, including calculating individual pixel intensities in the Phong shading method mentioned previously. The basic Bezier curve derivation is based on an expanded form of linear interpolation. This concept uses the parameterization of t to represent two connected lines. The curve is

© 2005 by Chapman & Hall/CRC

Computer Graphics

54-13

then derived by performing a linear interpolation between the points interpolated on each line; a sort of linear interpolation in n parts, where n is the number of control points. The following example should illustrate: Given are three points in space, {a, b, c}. These three points form the two line segments ab and bc (Figure 54.14).

FIGURE 54.14: Expanded form of linear interpolation.

During the ﬁrst “iteration” of the Bezier curve derivation, linear interpolation is performed on each line segment for a given t value. These points are then connected by an additional line segment. The resulting equations (illustrated in Figure 54.15) are: x = (1 − t)a + tb y = (1 − t)b + tc

FIGURE 54.15: First iteration of Bezier curve derivation. The linear interpolation is performed one last time, with the same t value between the new points {x, y} (Figure 54.16): z = (1 − t)x + ty This ﬁnal point z, after three linear interpolations, is on the curve. Following this 3-step process for several “stepped” values for t between 0 and 1 would result in a smooth curve of z-values from a to c, and is illustrated in Figure 54.17:

© 2005 by Chapman & Hall/CRC

54-14

Handbook of Data Structures and Applications

FIGURE 54.16: Result of three linear interpolations.

FIGURE 54.17: Smooth curve. This is a quadratic Bezier curve, and is represented mathematically by a linear interpolation between each set of x and y points, which were also derived through linear interpolation, for every t. By substituting the equations for x and y into the basic form, we obtain: z(t) = (1 − t)[(1 − t)a + tb] + t[(1 − t)b + tc] Simpliﬁed, we obtain a quadratic polynomial for a, b, and c as a function of the parameter t, or z(t) = (1 − t)2 a + 2(1 − t)tb + t2 c The “string art” algorithm described previously is also referred to as the de Causteljau algorithm. Programmatically, the algorithm performs an n-step process for each value of t, where n is the number of “control points” in the curve. In this example, {a, b, c} are the control points of the curve. Because of their ease of implementation and versatility, Bezier curves are invaluable in CAD, CAM, and graphic design. Also, Bezier curves require only a small number of control points for an accurate deﬁnition, so the data structure is ideal for compact storage. As mentioned previously, the Bezier form is the foundation for the Postscript font deﬁnition structure. However, the Bezier form has limitations. When several attached curves are required in a design component, it takes considerable eﬀort, or pre-calculation, to ensure the connected curves are “fair” or continuous with each other. Merely joining the end points of the curves may not be enough, resulting in “kinks” and other undesirable eﬀects. For this reason, the B-spline curve provides an alternative to the Bezier where continuity is important. In fact, B-spline curves have often been referred to as a “user interface” for the Bezier form.

© 2005 by Chapman & Hall/CRC

Computer Graphics

54-15

The goal of this section was to illustrate the versatility of linear interpolation and basic iteration structures in graphics and design. If more information is desired, numerous texts are currently available which describe the properties, mathematics, and applications of Bezier and B-spline curves, including the references listed at the end of this chapter.

54.4 54.4.1

Applications of Previously Discussed Structures Hidden Surface Removal: An Application of the BSP Tree

In addition to other algorithms, BSP (Binary Space Partitioning) trees are one example where a speciﬁc, widely used, data structure has direct application in computer graphics. Hidden surface removal is essential to realistic 3-D graphics, and a primary application of BSP trees. Hidden surface removal is used anywhere 3-dimensional objects must be made visible from multiple, if not inﬁnite view points within a graphics scene. Whether a scene is being viewed in a 3-D design application, or the latest sci-ﬁ game, the problem is the same: objects furthest away from the user’s viewpoint may be hidden by closer objects. Therefore, the algorithm used to determine visibility must eﬀectively sort the objects prior to rendering. This has been a hot topic until recent years, with researchers ﬁnding new and creative ways to tackle the problem. The z-buﬀer is now undeniably the most widely used algorithm. Tree algorithms are, on the other hand, also widely used where time-based rendering (animation) is not an issue, especially where the object positions are static. BSP trees are discussed in greater detail in Chapter 20. The BSP tree is an example of a “painter’s algorithm.” [1] The basic concept of this algorithm involves sorting the objects (polygons) from back to front “relative to [the] viewpoint” and then drawing them in order. The key to the BSP algorithm in hidden surface removal is in the pre-processing, and encoding of the objects into a data structure that is later used to determine visibility. In other words, the data structure does not change, only the way it is viewed.

FIGURE 54.18: Objects in a plane.

For hidden surface removal, the BSP tree is built by passing a plane through each polygon in the scene. For each point p in front of the plane, f (p) > 0 and for each point behind the plane, f (p) < 0. The tree structure is created by applying this object to each polygon, and deﬁning a “negative branch” and “positive branch” for each polygon relative to the current position in the tree. Also called the “half space” on each side of the plane, each vertex

© 2005 by Chapman & Hall/CRC

54-16

Handbook of Data Structures and Applications

position in the tree is dictated by it position relative to the passing planes. One plane is treated as the root of the tree, and successive branches are deﬁned from that root. Because the relative position of vertices to each other is deﬁned by the tree, regardless of position, the entire BSP tree can be pre-computed. Whether or not polygons in the tree are visible is then a function of their position in the viewer’s plane. Figure 54.19 demonstrates a BSP tree for vertices A through E shown in Figure 54.18.

FIGURE 54.19: BSP tree for Figure 54.18.

Note how each vertex can be located relative to at least two planes. For a viewpoint along h3, it is immediately apparent that vertex D is on the right, while A and E are on the left. Vertices C and B are located in the half space of h1 and h2, and are therefore of no interest. Vertices C and B will not be rendered. This relative method works for all positions in the BSP tree. As mentioned, BSP trees are not a universal solution for hidden surface removal, mainly because of the pre-processing requirement. There is a major caveat; if the objects in the scene are moving, the pre-processing of the BSP tree is no longer valid as the polygons change relative position. The tree must be built every time the relative positions of objects within the tree change. Re-calculating the tree at each time step is often too slow, especially in 3-D gaming, where several million polygons must be rendered every second. Another problem is that the BSP tree works in hidden surface removal only when “no polygon crosses the plane deﬁned by any other polygon.” In other words, no object can be both behind and in front of another object for the BSP sorting algorithm to work. In gaming, it is common for objects to “collide” so this algorithm becomes even less desirable in these unpredictable conditions.

© 2005 by Chapman & Hall/CRC

Computer Graphics

54.4.2

54-17

Proximity and Collision: Other Applications of the BSP Tree

Although BSP Tree structures are not as useful for determining the rendering order of moving polygons, they have other applications in graphics and gaming. For instance, trees are commonly used for collision detection, line-of sight, and other algorithms where the number of required calculations is lower. Determining between time-steps the relative positions of several (or several hundred) models, rather than several hundred million polygons, is much more feasible with today’s hardware. Enhanced Tree structures are even used in many of today’s more innovative artiﬁcial intelligence algorithms for gaming. These structures are used within the game space to quickly determine how an object sees, touches, and ultimately reacts with other objects.

54.4.3

More With Trees: CSG Modeling

Another widely used application of tree-based structures is application of Boolean operations to object construction. Constructive Solid Geometry, or CSG, modeling involves the construction of complex objects using only simple, primitive shapes. These shapes are added and subtracted to each other through “set operations,” or “Boolean operations.” The ﬁnal objects are referred to as “compound,” “Boolean,” or “CSG” objects [4]. Figure 54.20 of a dumbbell illustrates a typical example of a CSG object.

FIGURE 54.20: CSG object.

To construct this object in a CSG environment, Boolean operations are applied to primitive objects. These operations are “intersection,” “union,” and “diﬀerence”[4]. Each step in the tree represents a boolean combination between two objects. The resulting object at each point in the tree is then combined again with another Boolean operation at the next step. This type of progression is continued until the ﬁnished object is created. Figure 54.21 illustrates the CSG tree used to construct this dumbbell using two spheres, a cylinder, and a half-plane. A union operation is analogous to gluing two primitives together. An intersection operation results in only the portion (or volume) that both primitives occupy. Finally, a diﬀerence operation in eﬀect removes the intersected section of one primitive from another. Armed with these three Boolean operations, modeling and displaying very complex shapes are possible. However, attempting to cover the surface of a ﬁnal shape with a continuous mesh is another problem entirely, and the subject of numerous texts and papers. Consequently, CSG objects are largely used for initial visualization of a complete model. This solid model is then sent to another application that converts the model to a polygonal mesh.

© 2005 by Chapman & Hall/CRC

54-18

Handbook of Data Structures and Applications

FIGURE 54.21: CSG tree corresponding to Figure 54.20. From a data structure and algorithm standpoint, CSG trees are quite useful. Firstly, and most obvious, the method utilizes the tree structure already mentioned throughout the text. Secondly, the ﬁnal objects do not require individual mesh models to deﬁne them. Rather, each object is simply deﬁned by its tree, where each node of the tree references primitives, such as the sphere, cone, cylinder, cube, and plane. With the basic models for the sphere, cone, etc. preprocessed and stored in memory, the overhead of CSG applications is kept to a minimum. Many commercially available solid modeling and animation packages still provide CSG as a standard user-interface.

References [1] Shirley, Fundamentals of Computer Graphics, 2002, School of Computing University of Utah [2] Hill, Computer Graphics Using Open GL, 1990, Macmillan Publishing Company [3] Farin, Curves and Surfaces for CAGD, A Practical Guide, Fifth Edition, 2002, Academic Press. [4] Rockwood, Geometric Primitives, 1997, CRC Press Inc. [5] Arvo, Graphics Gems II, Chapter IV.6, Academic Press, Inc, 1991. [6] Pappas and Murray, Visual Basic Programming with the Windows API, Chapter 15, Prentice Hall, 1998.

© 2005 by Chapman & Hall/CRC

55 Geographic Information Systems 55.1

Geographic Information Systems: What They Are All About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-1 Geometric Objects • Topological versus Metric Data • Geometric Operations • Geometric Data Structures • Applications of Geographic Information

55.2

Space Filling Curves: Order in Many Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

55-5

Recursively Deﬁned Space Filling Curves • Range Queries for Space Filling Curve Data Structures • Are All Space Filling Curves Created Equal? • Many Curve Pieces for a Query Range • One Curve Piece for a Query Range

55.3

Bernhard Seeger University of Marburg

Peter Widmayer ETH Zurich

55.1

Spatial Join . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-11 External Algorithms

55.4

•

Advanced Issues

Models, Toolboxes and Systems for Geographic Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-15 Standardized Data Models Research Prototypes

•

Commercial Systems

•

Geographic Information Systems: What They Are All About

Geographic Information Systems (GISs) serve the purpose of maintaining, analyzing and visualizing spatial data that represent geographic objects, such as mountains, lakes, houses, roads, tunnels. For spatial data, geometric (spatial) attributes play a key role, representing e.g. points, lines, and regions in the plane or volumes in 3-dimensional space. They model geographical features of the real world, such as geodesic measurement points, boundary lines between adjacent pieces of land (in a cadastral database), lakes or recreational park regions (in a tourist information system). In three dimensions, spatial data describe tunnels, underground pipe systems in cities, mountain ranges, or quarries. In addition, spatial data in a GIS possess non-geometric, so-called thematic attributes, such as the time when a geodesic measurement was taken, the name of the owner of a piece of land in a cadastral database, the usage history of a park. This chapter aims to highlight some of the data structures and algorithms aspects of GISs that deﬁne challenging research problems, and some that show interesting solutions. More background information and deeper technical expositions can be found in books such as [38, 64, 66, 75].

55-1

© 2005 by Chapman & Hall/CRC

55-2

55.1.1

Handbook of Data Structures and Applications

Geometric Objects

Our technical exposition will be limited to geometric objects with a vector representation. Here, a point is described by its coordinates in the Euclidean plane with a Cartesian coordinate system. We deliberately ignore the geographic reality that the earth is (almost) spherical, to keep things simple. A line segment is deﬁned by its two end points. A polygonal line is a sequence of line segments with coinciding endpoints along the way. A (simple) polygonal region is described by its corner points, in clockwise (or counterclockwise) order around its interior. In contrast, in a raster representation of a region, each point in the region, discretized at some resolution, has an individual representation, just like a pixel in a raster image. Satellites take raster images at an amazing rate, and hence raster data abound in GISs, challenging current storage technology with terabytes of incoming data per day. Nevertheless, we are not concerned with raster images in this chapter, even though some of the techniques that we describe have implications for raster data [58]. The reason for our choice is the diﬀerent ﬂavor that operations with raster images have, as compared with vector data, requiring a chapter of their own.

55.1.2

Topological versus Metric Data

For some purposes, not even metric information is needed; it is suﬃcient to model the topology of a spatial dataset. How many states share a border with Iowa? is an example of a question of this topological type. In this chapter, however, we will not speciﬁcally study the implications that this limitation has. There is a risk of confusing the limitation to topological aspects only with the explicit representation of topology in the data structure. Here, the term explicit refers to the fact that a topological relationship need not be computed with substantial eﬀort. As an example, assume that a partition of the plane into polygons is stored so that each polygon individually is a separate clockwise sequence of points around its interior. In this case, it is not easy to ﬁnd the polygons that are neighbors of a given polygon, that is, share some boundary. If, however, the partition is stored so that each edge of the polygon explicitly references both adjacent polygons (just like the doubly connected edge list in computational geometry [62]), then a simple traversal around the given polygon will reveal its neighbors. It will always be an important design decision for a data structure which representation to pick.

55.1.3

Geometric Operations

Given this range of applications and geometric objects, it is no surprise that a GIS is expected to support a large variety of operations. We will discuss a few of them now, and then proceed to explain in detail how to perform two fundamental types of operations in the remainder of the chapter, spatial searching and spatial join. Spatial searching refers to rather elementary geometric operations without which no GIS can function. Here are a few examples, always working on a collection of geometric objects, such as points, lines, polygonal lines, or polygons. A nearest neighbor query for a query point asks for an object in the collection that is closest to the query point, among all objects in the collection. A distance query for a query point and a certain distance asks for all objects in the collection that are within the given distance from the query point. A range query (or window query) for a query range asks for all objects in the collection that intersect the given orthogonal window. A ray shooting query for a point and a direction asks for the object in the collection that is hit ﬁrst if the ray starts at the given point and shoots in the given direction. A pointin-polygon query for a query point asks for all polygons in the collection in which the query

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-3

point lies. These ﬁve types of queries are illustrations only; many more query types are just as relevant. For a more extensive discussion on geometric operations, see the chapters on geometric data structures in this Handbook. In particular, it is well understood that great care must be taken in geometric computations to avoid numeric problems, because already tiny numerical inaccuracies can have catastrophic eﬀects on computational results. Practically all books on geometric computation devote some attention to this problem [13, 49, 62], and geometric software libraries such as CGAL [11] take care of the problem by oﬀering exact geometric computation.

55.1.4

Geometric Data Structures

Naturally, we can only hope to respond to queries of this nature quickly, if we devise and make use of appropriate data structures. An extra complication arises here due to the fact that GISs maintain data sets too large for internal memory. Data maintenance and analysis operations can therefore be eﬃcient only if they take external memory properties into account, as discussed also in other chapters in this Handbook. We will limit ourselves here to external storage media with direct access to storage blocks, such as disks (for raster data, we would need to include tertiary storage media such as tapes). A block access to a random block on disk takes time to move the read-write-head to the proper position (the latency), and then to read or write the data in the block (the transfer). With today’s disks, where block sizes are on the order of several kBytes, latency is a few milliseconds, and transfer time is less. Therefore, it pays to read a number of blocks in consecution, because they require the head movement only once, and in this way amortize its cost over more than one block. We will discuss in detail how to make use of this cost savings possibility. All operations on an external memory geometric data structure follow the general ﬁlterreﬁnement pattern [54] that ﬁrst, all relevant blocks are read from disk. This step is a ﬁrst (potentially rough) ﬁlter that makes a superset of the relevant set of geometric objects available for processing in main memory. In a second step, a reﬁnement identiﬁes the exact set of relevant objects. Even though complicated geometric operators can make this reﬁnement step quite time consuming, in this chapter we limit our considerations to the ﬁlter step. Because queries are the dominant operations in GISs by far, we do not explicitly discuss updates (see the chapters on external memory spatial data structures in this Handbook for more information).

55.1.5

Applications of Geographic Information

Before we go into technical detail, let us mention a few of the applications that make GISs a challenging research area up until today, with more fascinating problems to expect than what we can solve. Map Overlay

Maps are the most well-known visualizations of geographical data. In its simplest form, a map is a partition of the plane into simple polygons. Each polygon may represent, for instance, an area with a speciﬁc thematic attribute value. For the attribute land use, polygons can stand for forest, savanna, lake areas in a simplistic example, whereas for the attribute state, polygons represent Arizona, New Mexico, Texas. In a GIS, each separable aspect of the data (such as the planar polygonal partitions just mentioned) is said to deﬁne a layer. This makes it easy to think about certain analysis and viewing operations, by just superimposing (overlaying) layers or, more generally, by applying Boolean operations on

© 2005 by Chapman & Hall/CRC

55-4

Handbook of Data Structures and Applications

sets of layers. In our example, an overlay of a land use map with a state map deﬁnes a new map, where each new polygon is (some part of) the intersection of two given polygons, one from each layer. In map overlay in general, a Boolean combination of all involved thematic attributes together deﬁnes polygons of the resulting map, and one resulting attribute value in our example are the savannas of Texas. Map overlay has been studied in many diﬀerent contexts, ranging from the special case of convex polygons in the partition and an internal memory plane-sweep computation [50] to the general case that we will describe in the context of spatial join processing later in this chapter. Map Labeling

Map visualization is an entire ﬁeld of its own (traditionally called cartography), with the general task to layout a map in such a way that it provides just the information that is desired, no more and no less; one might simply say, the map looks right. What that means in general is hard to say. For maps with texts that label cities, rivers, and the like, looking right implies that the labels are in proper position and size, that they do not run into each other or into important geometric features, and that it is obvious to which geometric object a label refers. Many simply stated problems in map labeling turn out to be NP-hard to solve exactly, and as a whole, map labeling is an active research area with a variety of unresolved questions (see [47] for a tutorial introduction). Cartographic Generalization

If cartographers believe that automatically labeled maps will never look really good, they believe even more that another aspect that plays a role in map visualization will always need human intervention, namely map generalization. Generalization of a map is the process of reducing the complexity and contents of a map by discarding less important information and retaining the more essential characteristics. This is most prominently used in producing a map at a low resolution, given a map at a high resolution. Generalization ensures that the reader of the produced low resolution map is not overwhelmed with all the details from the high resolution map, displayed in small size in a densely ﬁlled area. Generalization is viewed to belong to the art of map making, with a whole body of rules of its own that can guide the artist [9, 46]. Nevertheless, computational solutions of some subproblem help a lot, such as the simpliﬁcation of a high resolution polygonal line to a polygonal line with fewer corner points that does not deviate too much from the given line. For line simpliﬁcation, old algorithmic ideas [16] have seen eﬃcient implementations [28] recently. Maps on demand, with a selected viewing window, to be shown on a screen with given resolution, imply the choice of a corresponding scale and therefore need the support of data structures that allow the retrieval up to a desired degree of detail [4]. Apart from the simplest aspects, automatic map generalization and access support are open problems. Road Maps

Maps have been used for ages to plan trips. Hence, we want networks of roads, railways, and the like to be represented in a GIS, in addition to the data described above. This ﬁts naturally with the geometric objects that are present in a GIS in any case, such as polygonal lines. A point where polygonal lines meet (a node) can then represent an intersection of roads (edges), with a choice which road to take as we move along. The specialty in storing roads comes from the fact that we want to be able to ﬁnd paths between nodes eﬃciently, for instance in car navigation systems, while we are driving. The fact that not all roads are equally important can be expressed by weights on the edges. Because a shortest path

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-5

computation is carried out as a breadth ﬁrst search on the edge weighted graph, in one way or another (e.g. bidirectional), it makes sense to partition the graph into pages so as to minimize the weight of edges that cross the cuts induced by the partition. Whenever we want to maintain road data together with other thematic data, such as land use data, it also makes sense to store all the data in one structure, instead of using an extra structure for the road network. It may come as no surprise that for some data structures, partitioning the graph and partitioning the other thematic aspects go together very well (compromising a little on both sides), while for others this is not easily the case. The compromise in partitioning the graph does almost no harm, because it is NP-complete to ﬁnd the optimum partition, and hence a suboptimal solution of some sort is all we can get anyway. Even though this type of heuristic approaches for maintaining road networks in GIS are useful [69], it is by no means clear whether this is the best that can be achieved. Spatiotemporal Data

Just like for many other database applications, a time component brings a new dimension to spatial data (even in the mathematical sense of the word, if you wish). How did the forest areas in New Mexico develop over the last 20 years? Questions like this one demonstrate that for environmental information systems, a speciﬁc branch of GISs, keeping track of developments over time is a must. Spatiotemporal database research is concerned with all problems that the combination of space with time raises, from models and languages, all the way through data structures and query algorithms, to architectures and implementations of systems [36]. In this chapter, we refrain from the temptation to discuss spatiotemporal data structures in detail; see Chapter 22 for an introduction into this lively ﬁeld. Data Mining

The development of spatial data over time is interesting not only for explicit queries, but also for data mining. Here, one tries to ﬁnd relevant patterns in the data, without knowing beforehand the character of the pattern (for an introduction to the ﬁeld of data mining, see [27]). Let us brieﬂy look at a historic example for spatial data mining: A London epidemiologist identiﬁed a water pump as the centroid of the locations of cholera cases, and after the water pump was shut down, the cholera subsided. This and other examples are described in [68]. If we want to ﬁnd patterns in quite some generality, we need a large data store that keeps track of data extracted from diﬀerent data sources over time, a socalled data warehouse. It remains as an important, challenging open problem to eﬃciently run a spatial data warehouse and mine the spatial data. The spatial nature of the data seems to add the extra complexity that comes from the high autocorrelation present in typical spatial data sets, with the eﬀect that most knowledge discovery techniques today perform poorly. This omnipresent tendency for data to cluster in space has been stated nicely [74]: Everything is related to everything else but nearby things are more related than distant things. For a survey on the state of the art and the challenges of spatial data mining, consult [70].

55.2

Space Filling Curves: Order in Many Dimensions

As explained above, our interest in space ﬁlling curves (SFCs) comes from two sources. The ﬁrst one is the fact that we aim at exploiting the typical database support mechanisms that a conventional database management system (DBMS) oﬀers, such as support for transactions and recovery. On the data structures level, this support is automatic if

© 2005 by Chapman & Hall/CRC

55-6

Handbook of Data Structures and Applications

we resort to a data structure that is inherently supported by a DBMS. These days, this is the case for a number of one dimensional data structures, such as those of the B-tree family (see Chapter 15). In addition, spatial database management systems support one of a small number of multidimensional data structures, such as those of the R-tree family (see Chapter 21) or of a grid based structure. The second reason for our interest in space ﬁlling curves is the general curiosity in the gap between one dimension and many: In what way and to what degree can we bridge this gap for the sake of supporting spatial operations of the kind described above? In our setting, the gap between one dimension and many goes back to the lack of a linear order in many dimensions that is useful for all purposes. A space ﬁlling curve tries to overcome this problem at least to some degree, by deﬁning an artiﬁcial linear order on a regular grid that is as useful as possible for the intended purpose. Limiting ourselves in this section to two dimensional space, we deﬁne a space ﬁlling curve more formally as a bijective mapping p from an index pair of a grid cell to its number in the linear order: p : N × N −→ {1, . . . , N 2 }. For the sake of simplicity, we limit ourselves to numbers N = 2n for some positive integer n. Our main attention is on the choice of the linear order in such a way that range queries are eﬃcient. In the GIS setting, it is not worst case eﬃciency that counts, but eﬃciency in expectation. It is, unfortunately, hard to say what queries can be expected. Therefore, a number of criteria are conceivable according to which the quality of a space ﬁlling curve should be measured. Before entering the discussion about these criteria, let us present some of the most prominent space ﬁlling curves that have been investigated for GIS data structures.

55.2.1

Recursively Deﬁned Space Filling Curves

Two space ﬁlling curves have been investigated most closely for the purpose of producing a linear ordering suitable for data structures for GIS, the z-curve, also called Peano curve or Morton encoding, and the Hilbert curve. We depict them in Figs. 55.1 and 55.2. They can both be deﬁned recursively with a simple reﬁnement rule: To obtain a 2n+1 × 2n+1 grid from a 2n × 2n grid, replace each cell by the elementary pattern of four cells as in Fig. 55.1, with the appropriate rotation for the Hilbert curve, as indicated in Fig. 55.2 for the four by four grid (i.e., for n = 2). In the same way, a slightly less popular space ﬁlling curve can be deﬁned, the Gray code curve (see Fig. 55.3). n=3 n=2 n=0

n=1

FIGURE 55.1: The z-curve for a 2n × 2n grid, for n = 0, . . . , 3. For all recursively deﬁned space ﬁlling curves, there is an obvious way to compute the mapping p (and also its inverse), namely just along the recursive deﬁnition. Any such

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-7 n=3 n=2

n=0

n=1

FIGURE 55.2: The Hilbert-curve for a 2n × 2n grid, for n = 0, . . . , 3. n=3 n=2 n=0

n=1

FIGURE 55.3: The Gray-curve for a 2n × 2n grid, for n = 0, . . . , 3. computation therefore takes time proportional to the logarithm of the grid size. Without going to great lengths in explaining how this computation is carried out in detail (see the beautiful book [65] for this and other mathematical aspects of space ﬁlling curves), let us just mention that there is a particularly nice way of viewing it for the z-curve: Here, p simply alternately interleaves the bits of both of its arguments, when these are expressed in binary. This may have made the z-curve popular among geographers at an early stage, even though our subsequent discussion will reveal that it is not necessarily the best choice.

55.2.2

Range Queries for Space Filling Curve Data Structures

A space ﬁlling curve deﬁnes a linear order that is used to store the geographical data objects. We distinguish between two extreme storage paradigms that can be found in spatial data structures, namely a partition of the data space according to the objects present in the data set (such as in R-trees, or in B-trees for a single dimension), or a partition of the space only, regardless of the objects (such as in regular cell partitions). The latter makes sense if the distribution of objects is somewhat uniform (see the spatial data structures chapters in this Handbook), and in this case achieves considerable eﬃciency. Naturally, a multitude of data structures that operate in between both extremes have been proposed, such as the grid ﬁle (see the spatial data structures chapters in this Handbook). As to the objects, let us limit ourselves to points in the plane, so that we can focus on a single partition of the plane into grid cells and need not worry about objects that cross cell boundaries (these are dealt with elsewhere in this Handbook, see e.g. the chapter on R-trees, or the survey chapter). For simplicity, let us restrict our attention to partitions of the data space into a 2n × 2n grid, for some integer n. Partitions into other numbers of grid cells (i.e., not powers of four) can be achieved dynamically for some data structures (see e.g. z-Hashing, [32]), but are not always easy to obtain; we will ignore that aspect for now. Corresponding to both extreme data structuring principles, there are two ways to associate data with external storage blocks for space ﬁlling curves. The simplest way is to identify a grid cell with a disk block. This is the usual setting. Grid cell numbers correspond to physical disk block addresses, and a range query translates into the need to access the

© 2005 by Chapman & Hall/CRC

55-8

Handbook of Data Structures and Applications

corresponding set of disk blocks. In the example of Fig. 55.4, for instance, the query range shown in bold results in the need to read disk blocks corresponding to cells with numbers 2-3, 6, 8-12, 14, that is, cell numbers come in four consecutive sequences. In the best case, the cells to be read have consecutive numbers, and hence a single disk seek operation will suﬃce, followed by a number of successive block read operations. In the worst case, the sequence of disk cell numbers to be read breaks into a large number of consecutive pieces. It is one concern in the choice of a space ﬁlling curve to bound this number, or some measure related to it (see the next subsection).

5

7

13

15

4

6

12

14

1

3

9

11

0

2

8

10

FIGURE 55.4: Range queries and disk seek operations.

The association of a grid cell with exactly one disk block gives a data structure based on a space ﬁlling curve very little ﬂexibility to adapt to a not so uniform data set. A diﬀerent and more adaptive way of associating disk blocks with grid cells is based on a partition of the data space into cells so that for each cell, the objects in the cell ﬁt on a disk block (as before), but a disk block stores the union of the sets of objects in a consecutive number of cells. This method has the advantage that relatively sparsely populated cells can go together in one disk block, but has the potential disadvantage that disk block maintenance becomes more complex. Not too complex, though, because a disk block can simply be maintained as a node of a B-tree (or, more speciﬁcally, a leaf, depending on the B-tree variety), with the content of a cell limiting the granularity of the data in the node. Under this assumption, the adaptation of the data structure to a dynamically changing population of data objects simply translates to split and merge operations of B-tree nodes. In this setting, the measure of eﬃciency for range queries may well be diﬀerent from the above: One might be interested in running a range query on the B-tree representation, and ignoring (skipping) the contents of retrieved cells that do not contribute to the result. Hence, for a range query to be eﬃcient, the consecutive single piece of the space ﬁlling curve that includes all cells of the query range should not run outside the query range for too long, i.e., for too high a number of cells. We will discuss the eﬀect of a requirement of this type on the design of a space ﬁlling curve in more detail below. Obviously, there are many other ways in which a space ﬁlling curve can be the basis for a spatial data structure, but we will refrain from a more detailed discussion here and limit ourselves to the two extremes described so far.

55.2.3

Are All Space Filling Curves Created Equal?

Consider a space ﬁlling curve that visits the cells of a grid by visiting next an orthogonal neighbor of the cell just visited. The Hilbert curve is of this orthogonal neighbor type, but the z-curve is not. Now consider a square query region of some ﬁxed (but arbitrary) size,

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-9

FIGURE 55.5: Disk seeks for an orthogonal curve. say k by k grid cells, and study the number of consecutive pieces of the space ﬁlling curve that this query region deﬁnes (see Fig. 55.5 for a range query region of 3 by 3 grid cells that deﬁnes 3 consecutive pieces of a Hilbert curve). We are interested in the average number of curve pieces over all locations of the query range. For a ﬁxed location of the query range, the number of curve pieces that the range deﬁnes is half the number of orthogonal neighbor links that cross the range boundary (ignoring the starting or ending cell of the entire curve). The reason is that when we start at the ﬁrst cell of the entire curve and follow the curve, it is an orthogonal neighbor on the curve that leads into the query range and another one that leads out, repeatedly until the query range is exhausted. To obtain the average number of curve pieces per query range, we sum the number of boundary crossing orthogonal neighbors over all query range locations (and then divide that number by twice the number of locations, but this step is of no relevance in our argument). This sum, however, amounts to the same as summing up for every orthogonal neighbor link the number of range query locations in which it is a crossing link. We content ourselves for the sake of simplicity with an approximate average, by ignoring cells close to the boundary of the data space, an assumption that will introduce only a small inaccuracy whenever k is much less than N (and this is the only interesting case). Hence, each orthogonal link will be a crossing link for 2k query range positions, namely k positions for the query range on each of both sides. The interesting observation now is that this summation disregards the position of the orthogonal link completely (apart from the fact that we ignore an area of size O(kN ) along the boundary of the universe). Hence, for any square range query, the average number of pieces of a space ﬁlling curve in the query range is the same across all space ﬁlling curves of the orthogonal neighbor type. In this sense, therefore, all space ﬁlling curves of the orthogonal neighbor type have the same quality. This includes snake like curves such as row-major zigzag snakes and spiral snakes. Orthogonal neighbors are not a painful limitation here: If we allow for other than orthogonal neighbors, this measure of quality can become only worse, because a non-orthogonal neighbor is a crossing link for more query range locations. In rough terms, this indicates that the choice of space ﬁlling curve may not really matter that much. Nevertheless, it also shows that the above measure of quality is not perfectly chosen, since it captures the situation only for square query ranges, and that is not fully adequate for GISs.

55.2.4

Many Curve Pieces for a Query Range

The properties that recursively deﬁnable space ﬁlling curves entail for spatial data structure design have been studied from a theoretical perspective [3, 8]. The performance of square range queries has been studied [3] on the basis that range queries in a GIS can have any size, but are most likely to not deviate from a square shape by too much. Based on the

© 2005 by Chapman & Hall/CRC

55-10

Handbook of Data Structures and Applications

external storage access model in which disk seek and latency time by far dominates the time to read a block, they allow a range query to skip blocks for eﬃciency’s sake. Skipping a block amounts to reading it in a sequence of blocks, without making use of the information thus obtained. In the example of Fig. 55.4, skipping the blocks of cells 4, 5, 7, and 13 leads to a single sequence of the consecutive blocks 2-14. This can obviously be preferable to just reading consecutive sequences of relevant cell blocks only and therefore performing more disk seek operations, provided that the number of skipped blocks is not too large. In an attempt to quantify one against the other, consider a range query algorithm that is allowed to read a linear number of additional cells [3], as compared with those in the query range. It turns out that for square range query regions of arbitrary size and the permission to read at most a linear number of extra cells, each recursive space ﬁlling curve needs at least three disk seek operations in the worst case. While no recursive space ﬁlling curve needs more than four disk seeks in the worst case, none of the very popular recursive space ﬁlling curves, including the z-curve, the Hilbert curve, and the Gray code curve, can cope with less than four. One can deﬁne a recursive space ﬁlling curve that needs only three disk seeks in the worst case [3], and hence the lower and upper bounds match. This result is only a basis for data structure design, though, because its quality criterion is still too far from GIS reality to guide the design of practical space ﬁlling curves. Along the same lines, one can reﬁne the cost measure and account explicitly for disk seek cost [8]: For a suﬃciently short sequence of cells, it is cheaper to skip them, but as soon as the sequence length exceeds a constant (that is deﬁned by the disk seek cost, relative to the cost of reading a block), it is cheaper to stop reading and perform a disk seek. A reﬁnement of the simple observation from above leads to performance formulas expressed in the numbers of links of the various types that the space ﬁlling curve uses, taking the relative disk seek cost into consideration [8]. It turns out that the local behavior of space ﬁlling curves can be modeled well by random walks, again perhaps an indication that at least locally, the choice of a particular space ﬁlling curve is not crucial for the performance.

55.2.5

One Curve Piece for a Query Range

The second approach described above reads a single consecutive piece of the space ﬁlling curve to respond to a range query, from the lowest numbered cell in the range to the highest numbered. In general, this implies that a high number of irrelevant cells will be read. As we explained above, such an approach can be attractive, because it allows immediately to make use of well established data structures such as the B-tree, including all access algorithms. We need to make sure, however, that the ineﬃciency that results from the extra accessed cells remains tolerable. Let us therefore now calculate this ineﬃciency approximately. To this end, we change our perspective and calculate for any consecutive sequence of cells along the space ﬁlling curve its shape in two-dimensional space. The shape itself may be quite complicated, but for our purpose a simple rectangular bounding box of all grid cells in question will suﬃce. The example in Fig. 55.6 shows a set of 3 and a set of 4 consecutive cells along the curve, together with their bounding boxes (shaded), residing in a corner of a Hilbert curve. Now, a simple measure of quality suggests itself: The fewer useless cells we get in the bounding box, the better. A quick thought reveals that this measure is all too crude, because it does not take into consideration that square ranges are more important than skinny ranges. This bias can be taken into account by placing a piece of the space ﬁlling curve into its smallest enclosing square (see the dotted outline of a 3 by 3 square in Fig. 55.6 for a bounding square of the 3 cells), and by taking the occupancy (i.e., percentage of relevant cells) of that square as the measure of quality. The question we now face is to bound the occupancy for a given space ﬁlling curve, across all possible pieces of the curve,

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-11

FIGURE 55.6: Bounding a piece of a curve. and further, to ﬁnd a best possible curve with respect to this bound. For simplicity’s sake, let us again limit ourselves to curves with orthogonal links. Let us ﬁrst argue that the lower bound on the occupancy, for any space ﬁlling curve, cannot be higher than one third. This is easy to see by contradiction. Assume to this end that there is a space ﬁlling curve that guarantees an occupancy of more than one third. In particular, this implies that there cannot be two vertical links immediately after each other, nor can there be two consecutive horizontal links (the reason is that the three cells deﬁning these two consecutive links deﬁne a smallest enclosing square of size 3 by 3 cells, with only 3 of these 9 cells being useful, and hence with an occupancy of only one third). But this ﬁnishes the argument, because no space ﬁlling curve can always alternate between vertical and horizontal links (the reason is that a corner of the space that is traversed by the curve makes two consecutive links of the same type unavoidable, see Fig. 55.7).

FIGURE 55.7: All possible corner cell traversals (excluding symmetry).

On the positive side, the Hilbert curve guarantees an occupancy of one third. The reason is that the Hilbert curve gives this guarantee for the 4 by 4 grid, and that this property is preserved in the recursive reﬁnement. This leads to the conclusion that in terms of the worst case occupancy guarantee, the Hilbert curve is a best possible basis for a spatial data structure.

55.3

Spatial Join

In order to compute map overlays, a GIS provides an operator called spatial join that allows ﬂexible combinations of multiple inputs according to a spatial predicate. The spatial join computes a subset of the Cartesian product of the inputs and therefore, it is closely related to the join operator of a database management system (DBMS). A (binary) join on two sets of spatial objects, say R and S, according to a binary spatial predicate P is given by SJP (R, S) = {(r, s) | r ∈ R ∧ s ∈ S ∧ P (r, s)} The join is called a spatial join if the binary predicate P refers to spatial attributes of the objects. Among the most important ones are the following:

© 2005 by Chapman & Hall/CRC

55-12

Handbook of Data Structures and Applications

• Intersection predicate: P∩ (r, s) = (r ∩ s = ∅). • Distance predicate: Let DF be a distance function and > 0. Then, PDF (r, s) = (DF (r, s) < ). In the following we assume that R and S consist of N two-dimensional spatial objects and that the join returns a total of T pairs of objects. N is assumed being suﬃciently large such that the problem cannot be solved entirely in main memory of size M . Therefore, we are particularly interested in external memory algorithms. Due to today’s large main memory, the reader might question this assumption. However, remember that a GIS is a resourceintensive multi-user system where multiple complex queries are running concurrently. Thus, the memory assigned to a speciﬁc join algorithm might be substantially lower than the total physically available. Given a block size of B, we use the following notations: n = N/B, m = M/B and t = T /B. Without loss of generality, we assume that B is a divisor of N , M and T . A naive approach to processing a spatial join is simply to perform a so-called nested-loop algorithm, which checks the spatial predicate for each pair of objects. The nested-loop algorithm is generally applicable, but requires O(N 2 ) time and O(n2 ) I/O operations. For special predicates, however, we are able to design new algorithms that provide substantial improvements in runtime compared to the naive approach. Among those is the intersection predicate, which is also the most frequently used predicate in GIS. We therefore will restrict our discussion to the intersection predicate to which the term spatial join will refer to by default. We postpone the discussion of other predicates to the end of the section. The processing of spatial joins follows the general paradigm of multi-step query processing [55] that consists at least of the following two processing steps. In the ﬁlter step, a spatial join is performed using conservative approximations of the spatial objects like their minimum bounding rectangles (MBRs). In the reﬁnement step, the candidates of the ﬁlter step are checked against the join predicate using their exact geometry. In this section, we limit our discussion on the ﬁlter step that utilizes the MBR of the spatial objects. The reader is referred to [6, 31] for a detailed discussion of the reﬁnement step and intermediate processing steps that are additionally introduced. If main memory is large enough to keep R and S entirely in memory, the ﬁlter step is (almost) equivalent to the rectangle intersection problem, one of the elementary problems in computational geometry. The problem can be solved in O(N log N + T ) runtime where T denotes the size of the output. This can be accomplished by using either a sweep-line algorithm [72] or a divide-and-conquer algorithm [25]. However, the disadvantage of these algorithms is their high overhead that results in a high constant factor. For real-life spatial data, it is generally advisable, see [1] for example, to employ an algorithm that is not optimal in the worst-case.

55.3.1

External Algorithms

In this subsection, we assume that the spatial relations are larger than main memory. According to the availability of indices on both relations, on one of the relations, or on none of the relations, we obtain three diﬀerent classes of spatial join algorithms for the ﬁlter step. Index on both spatial relations

In [5, 7], spatial join algorithms were presented where each of the relations is indexed by an R-tree. Starting at the roots, this algorithm synchronously traverses the trees node by node and joins all pairs of overlapping MBRs. If the nodes are leaves, the associated

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-13

spatial objects are further examined in the reﬁnement step. Otherwise, the algorithm is called recursively for each qualifying pair of entries. As pointed out in [20], this algorithm is not limited to R-trees, but can be applied to a broad class of index structures. Important to both, I/O and CPU cost, is the traversal strategy. In [7], a depth-ﬁrst strategy was proposed where the qualifying pairs of nodes are visited according to a spatial ordering. If large buﬀers are available, a breadth-ﬁrst traversal strategy was shown to be superior [30] in an experimental comparison. Though experimental studies have shown that these algorithms provide fast runtime in practice, the worst-case complexity of the algorithm is O(n2 ). The general problem of computing an optimal schedule for reading pages from disk is shown [48] to be NP-hard for spatial joins. For speciﬁc situations where two arbitrary rectangles from R and S do not share boundaries, the optimal solution can be computed in linear time. This is generally satisﬁed for bounding boxes of the leaves of R-trees. Index on one spatial relation

Next, we assume that only one of the relations, say R, is equipped with a spatial index. We distinguish between the following three approaches. The ﬁrst approach is to issue a range query against the index on R for each MBR of S. By using worst-case optimal spatial index structures, this already results in algorithms with subquadratic runtime. When a page buﬀer is available, it is also beneﬁcial to sort the MBRs of S according to a criterion that preserves locality, e.g. Hilbert-value of the center of the MBRs. Then, two consecutive queries will access the same pages with high probability and therefore, the overall number of disk accesses decreases. The second approach as proposed in [40] ﬁrst creates a spatial index on S, the relation without spatial index. The basic idea for the creation of the index is to use the upper levels of the available index on R as a skeleton. Thereafter, one of the algorithms is applied that requires an index on both of the relations. In [43] an improvement of the algorithm is presented that makes better use of the available main memory. A third approach is presented in [2, 22] where the spatial index is used for sorting the data according to one of the minimum boundaries of the rectangles. The sorted sequence then serves as input to an external plane-sweep algorithm. Index on none of the inputs

There are two early proposals on spatial join processing that require no index. The ﬁrst one [23] suggests using an external version of a computational geometry algorithm. This is basically achieved by employing an external segment tree. The other [54] can be viewed as a sweep-line algorithm where the ordering is derived from z-order. Though the algorithm was originally not designed for rectangles, this can be accomplished in a straightforward manner [15, 37]. Like any other sweep-line algorithm, R and S are ﬁrst sorted, where the z-order serves as criterion in the following way. A rectangle receives the z-value of the smallest cell that still covers the entire rectangle. Let x be a z-value and b(x) = (x0 , x1 , . . . , xk ) its binary representation where k = l(x) denotes the level of the corresponding cell. Then, x
© 2005 by Chapman & Hall/CRC

55-14

Handbook of Data Structures and Applications

can practically be improved by introducing redundancy [15, 57]. However, the worst-case bound remains the same. Other methods like the Partition Based Spatial-Merge Join (PBSM) [61] and the Spatial Hash-Join [41] are based on the principles of divide-and-conquer where spatial relations are partitioned into buckets that ﬁt into main memory and the join is computed for each pair of corresponding buckets. Let us discuss PBSM in more detail. PBSM performs in four phases. In the ﬁrst phase, the number of partitions p is computed such that the join for each pair of partitions is likely to be processed in main memory. Then, a grid is introduced with g cells, g ≥ p and each of the cells is then associated with a partition. A rectangle is then assigned to a partition if it intersects with at least one of its cells. In the second phase, pairs of partitions have to be processed that still contain too much data. This usually requires repartitioning of the data into smaller partitions. In the third phase, the join is processed in main memory for every pair of related partitions. The fourth phase consists of sorting, in order to get rid of duplicates in the response set. This however can be replaced by applying an inexpensive check of the result whenever it is produced [14]. Overall, the worst-case is O(n2 ) I/O operations for PBSM. Spatial Hash-Joins [41] diﬀer from PBSM in the following way. One of the relations is ﬁrst partitioned using a spatial index structure like an R-tree which uniquely assigns rectangles to leaves, where each of them corresponds to a partition. The other relation is then partitioned using the index of the ﬁrst relation. Each rectangle has to be stored in all partitions where an overlap with the MBR of the partition exists. Overall, this guarantees the avoidance of duplicate results. At the end of the nineties, [1] proposed the ﬁrst spatial join algorithm that meets the lower I/O bound O(n logm n + t). The method is an external sweep-line algorithm that is also related to the divide-and-conquer algorithm of [23]. Rather than partitioning √the problem recursively into two, it is proposed to partition the input recursively into k = m strips of almost equal size until the problem is small enough for being solved in memory. This results in a recursion tree of height O(logm n). At each level O(m) sorted lists of size Θ(B) are maintained where simultaneously an interval join is performed. Since each of the interval joins runs in O(n + t ) (n and t denotes the input size and result size of the join, respectively) and at most O(N ) intervals are maintained on each level of the recursion, it follows that at most O(n) accesses are required for each level. Instead of using the optimal algorithm, [1] employs a plane-sweep algorithm in their experiments where the sweep-line is organized by a dynamic interval tree. This is justiﬁed by the observation that the sweep-line is small as it holds only a small fraction of the entire spatial relations. If the algorithm really runs out of memory, it is recommended invoking the optimal algorithm for the entire problem. A diﬀerent overﬂow strategy has been presented in [34] where multiple iterations over the spatial relations might be necessary. The advantage of this strategy is that each answer is computed exactly once.

55.3.2

Advanced Issues

There are various extensions of the processing of spatial joins which will be discussed in the following. We ﬁrst discuss the processing of spatial joins on multiple inputs. Next we discuss the processing of distance joins. Eventually, we conclude the section with a brief summary of requirements on the implementation of algorithms within a system. The problem of joining more than two spatial relations according to a set of binary spatial predicates has been addressed in [42, 59]. Such a join can be represented by a connected graph where the nodes correspond to the spatial relations and edges to binary join predicates. A ﬁrst approach, called pairwise join method (PJM), is to decompose the

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-15

multi-way join into an operator tree of binary joins. The graphs with cycles therefore need to be transformed into a tree by ignoring the edges with lowest selectivity. Depending on the availability of spatial indexes, it is then advantageous to use from each class of spatial join algorithms the most eﬃcient one. A diﬀerent approach generalizes synchronous traversal to multiple inputs. The most important problem is not related to I/O, but to the processing cost of checking the join predicates. In [42] diﬀerent strategies are examined for an eﬃcient processing of the join predicates. Results of an experimental study revealed that neither PJM nor synchronous traversal performs best in all situations. Therefore, an algorithm is presented for computing a hybrid of these approaches by using dynamic programming. In addition to the intersection predicate, there are many other spatial predicates that are of practical relevance for spatial joins in a GIS, see [60] for a survey. Among those, the distance predicate has received most attention. The distance join of R and S computes all pairs within a given distance. This problem has been even more extended in the following directions. First, pairs should be reported in an increasing order of the distances of the spatial objects. Second, only a ﬁxed number of pairs should be reported. Third, answers should be produced on demand one at a time (without any limitations on the total number of answers). This problem has been addressed in [29, 71] where R-trees are assumed to be available on the spatial relations. The synchronized traversal is then controlled by two priority queues, where one maintains pairs of nodes according to their minimum distance and the other is primarily used for pruning irrelevant pairs of entries. In [71], it was recognized that there are many overlapping nodes which are not distinguishable in the priority queues. In order to break ties, a secondary ordering has been introduced that assigns a high priority to such pairs that are likely to contribute to the ﬁnal result. The design of algorithms for processing spatial joins largely depends on the speciﬁc system requirements. Similar to DBMSs, a complex query in a GIS is translated into an operator tree where nodes may correspond to spatial joins or other operators. There are two important problems that arise in this setting. First, an operator for processing spatial joins should have the ability to produce an estimation of the processing cost before the actual processing starts. Therefore, cost formulas are required that are inexpensive to compute, depend on only a few parameters of the input and produce suﬃciently accurate estimations. This problem has recently attracted research attention [73]. Second, a demand-driven implementation of operators is generally required [19] where answers are lazily produced. This allows a pipelined processing of chains of operators where answers can continuously be delivered to the user without materializing them in advance. Therefore, join algorithms should be non-blocking, i.e., ﬁrst answers should be produced without having consumed the entire input.

55.4

Models, Toolboxes and Systems for Geographic Information

GISs diﬀer substantially with respect to their speciﬁc functionality, which makes a comparison of the diﬀerent systems quite diﬃcult. We restrict our evaluation to the core functionality of a GIS related to manipulating vector data. Moreover, we stress the following three criteria in our comparison: Data Model: The spatial data model oﬀered by the system is very important to a user since it provides the geometric data types and the operations. Spatial indexing: Spatial index structures are important for eﬃciently supporting the most important spatial queries. It is therefore important what kind of index-

© 2005 by Chapman & Hall/CRC

55-16

Handbook of Data Structures and Applications

structures are actually available, particularly for applications that deal with very large databases. Spatial Join: Since spatial joins are the most important operation for combining diﬀerent maps, system performance depends on the eﬃciency of the underlying algorithm. These criteria are among the most important ones for spatial query processing in a GIS [24]. Though we already have restricted our considerations to speciﬁc aspects, we limit our comparison to a few important systems and libraries. We actually start our discussion with introducing two common standardized data models that are implemented by many commercial systems. Thereafter, we will discuss a few commercial systems that are used in the context of GIS in industry. Next, we present a few prototype systems that mainly serve as research platforms.

55.4.1

Standardized Data Models

The most important standard for GIS [51] is published by the OpenGIS Consortium. It provides an object-oriented vector model and basic geometric data types. The actual implementations of commercial vendors like Oracle are closely related to the OpenGIS standard. All of the geometric data types are subclasses of the class Geometry that provides an attribute that speciﬁes the spatial reference system. One of the methods of Geometry delivers the so-called envelope of an object that is called MBR in our terminology. The data model distinguishes between atomic geometric types like points, curves and surfaces and the corresponding collection types. The most complex atomic type is a polygonal surface that consists of an exterior polygonal ring and a set of internal polygonal rings where each of them represents a hole in the surface. Certain assertions have to be obeyed for such a polygonal surface to be in a consistent state. The topological relationships of two spatial objects are expressed by using the nineintersection model [17]. This model distinguishes between the exterior, interior and boundary of an object. Spatial predicates like overlaps are then deﬁned by specifying which of the assertions has to be satisﬁed. In addition to predicates, the OpenGIS speciﬁcation deﬁnes diﬀerent constructive methods like the one for computing the convex hull of a spatial object. Another important function allows to compute the buﬀer object which contains those points that are within distance ε of a given object. Moreover, there are methods for computing the intersection (and other set operations) on two objects. The OpenGIS standard has also largely inﬂuenced other standards for geographic data like the standard for storing, retrieving and processing spatial data using SQL [33] and the standard for the Geography Markup Language (GML) that is based on XML. The recently published version of the GML standard [52] additionally provides functionality to support three-dimensional objects and spatio-temporal applications.

55.4.2

Commercial Systems

In this subsection, we give a brief overview on the geographic query processing features of database systems, geographic information systems and data structures libraries.

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-17

Oracle

Among the three big database vendors, Oracle oﬀers the richest support for the management of spatial data. The data model of Oracle [53] is similar to the simple feature model of the OpenGIS Consortium. Oracle additionally oﬀers curves where the arcs might be circular. The spatial functionality is implemented on top of Oracle’s DBMS and therefore, it is not fully integrated. This is most notably when SQL is used for specifying spatial queries where the declarative ﬂavor of SQL is in contrast to the imperative procedural calls of the spatial functionality. The processing of spatial queries is performed by using the ﬁlter-reﬁnement approach. Moreover, intermediate ﬁlters might be employed where a kernel approximation of the object is used. This kind of processing is applied to spatial selection queries and to spatial joins. There are R-trees and quadtrees in Oracle for indexing spatial data. In contrast to Rtrees, (linear) quadtrees are based on a grid decomposition of the data space into tiles, each of them keep the list of intersecting objects. The linear quadtree is implemented within Oracle’s B+-tree. In case of ﬁxed indexing, the tiles are all of the same size. Oracle provides a function to enable users to determine a good setting of the tile size. In the case of hybrid indexing, tiles may vary in size. This is accomplished by locally increasing the grid resolution if the number of tiles is still below a given threshold. A comparison of Oracle’s spatial index-structures [35] shows that the query performance of the R-tree is superior compared to the quadtree. SpatialWare

SpatialWare [44] provides a set of functions that allow to manage spatial data within Microsoft SQL Server. The implementation is based on the extensibility features of SQL Server. Again, the spatial data types are similar to the simple features of OpenGIS. The query processing functionality consists of spatial selection queries as well as spatial joins. Most notable is the fact that SpatialWare provides R-trees for spatial indexing. LEDA and CGAL

LEDA [45] and CGAL [11] are C++-libraries (see Chapter 41 for more on LEDA) that oﬀer a rich collection of data structures and algorithms. Among the more advanced structures are spatial data types suitable for being used for the implementation of GIS. Most interesting to GIS is LEDA’s and CGAL’s ability to compute the geometry exactly by using a so-called rational kernel, i.e., spatial data types whose coordinates are rational numbers. LEDA provides the most important two-dimensional data types like points, iso-oriented rectangles, polygons and planar subdivisions. Moreover, LEDA provides eﬃcient implementations of important geometric algorithms like convex hull, triangulations and line intersection. AlgoComs, a companion product of LEDA, also provides a richer functionality for polygons that is closely related to a map overlay. In contrast to LEDA, the focus of CGAL is limited to computational geometry algorithms where CGAL’s functionality is generally richer in comparison to LEDA. CGAL contains kd-trees for indexing multidimensional point data and supports incremental nearest neighbor queries. Both, LEDA and CGAL, do not support external algorithms and index-structures and therefore, they only partly cover the functionality required for a GIS. There has been an extension of LEDA, called LEDA-SM [12], that supports the most important external data structures.

© 2005 by Chapman & Hall/CRC

55-18

Handbook of Data Structures and Applications

JTS Topology Suite

The JTS Topology Suite (JTS) [76] is a Java class library providing fundamental geometric functions according to the geometry model deﬁned by the OpenGIS Consortium [51]. Hence, it provides the basic spatial data types like polygonal surfaces and spatial predicates and operations like buﬀer and convex hull. The library also supports a user-deﬁnable precision model and contains code for robust geometric computation. There are also a few classes available for indexing MBRs (envelopes). The one structure is the MX-CIF quadtree [67] that is a specialized quadtree for organizing a dynamic set of rectangles. The other structure is a static R-tree that is created by using a bulk-loading technique [39]. Currently, there is no support for managing data on disk eﬃciently. JTS is published under an open source licensing agreement (the GNU LGPL).

55.4.3

Research Prototypes

SAND

The SAND System [18] gives the full query processing power of a spatial data base system and additionally, contains a browser for displaying the results of a spatial query. It provides the common folklore of spatial data types like point, rectangle, polygon and polygonal surface (termed polyregion). SAND oﬀers three kinds of query predicates that refer to topological, metric and distance predicates, respectively. A user might ask for the sequence of objects within a given region ranked according to their distance to a given query point. SAND is very powerful with respect to its indexing. SAND oﬀers the PMR-quadtree [67] as well as the R-tree [26]. Both of these spatial index-structures support ranking queries by controlling the traversal of the index through a priority queue. Note that SAND delivers the answers of a query as an iterator where the next answer is produced on demand. SAND oﬀers a rich source of spatial joins that are based on the principle of synchronized traversal of spatial indexes. A special feature of SAND is its query optimizer as well as its script language that serves as a glue between the diﬀerent system components. XXL

XXL (eXtensible and ﬂeXible Library) [10] is not a system, but a pure Java library that does not support spatial data types, but points and rectangles. XXL provides powerful support for various kinds of (spatial) indexes. There are diﬀerent kinds of implementations of R-trees as well as B-trees that might be combined with space-ﬁlling curves (e.g. z-order and Hilbert order). The concept of containers is introduced in XXL to provide an abstract view on external memory. Implementations of containers exist that are based on main memory, ﬁles and raw disks. XXL oﬀers a rich source of diﬀerent kinds of spatial joins like [14, 56] that are based on using space-ﬁlling curves and the sort-merge paradigm. XXL is equipped with an object-relational algebra of query operators and a query optimizer that is able to rewrite Java programs. Query operators are iterators that deliver the answers of a query on demand, one by one. XXL is available under an open source licensing agreement (GNU LGPL). Dedale

The Dedale System [63] is unique in the sense that its underlying data model is based on constraints [64]. Rather than using a boundary representation, a set of constraints describes spatial objects of arbitrary dimensions. This also allows the usage of constrained-based languages for expressing spatial queries.

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-19

The latest version of Dedale is implemented on BASIS [21] that consists of the R*-tree as its spatial index structure and diﬀerent spatial join algorithms that are able to exploit spatial indexes [22].

Acknowledgment We gratefully acknowledge the assistance of Michael Cammert. Only with his help were we able to deliver the document (almost) in time.

References [1] L. Arge, O. Procopiuc, S. Ramaswamy, T. Suel, and J.S. Vitter, Scalable sweepingbased spatial join, VLDB Conf., 1998, pp. 570–581. , A uniﬁed approach for indexed and non-indexed spatial joins, Int. Conf. on [2] Extending Database Tech., 2000, pp. 413–429. [3] T. Asano, D. Ranjan, T. Roos, E. Welzl, and P. Widmayer, Space ﬁlling curves and their use in the design of geometric data structures, Theoretical Computer Science 18 (1997), no. 1, 3–15. [4] B. Becker, H.-W. Six, and P. Widmayer, Spatial priority search: an access technique for scaleless maps, ACM SIGMOD Conf., 1991, pp. 128–137. [5] N. Beckmann, H.-P. Kriegel, R. Schneider, and B. Seeger, The R∗ -tree: An eﬃcient and robust access method for points and rectangles, ACM SIGMOD Conf., 1990, pp. 322–331. [6] T. Brinkhoﬀ, H.-P. Kriegel, R. Schneider, and B. Seeger, Multi-step processing of spatial joins, ACM SIGMOD Conf., 1994, pp. 197–208. [7] T. Brinkhoﬀ, H.-P. Kriegel, and B. Seeger, Eﬃcient processing of spatial joins using R-trees, ACM SIGMOD Conf., 1993, pp. 237–246. [8] E. Bugnion, T. Roos, R. Wattenhofer, and P. Widmayer, Space ﬁlling curves versus random walks, in Proc. Algorithmic Foundations of Geographic Information Systems (van Kreveld, Nievergelt, Roos, and Widmayer, eds.), Lecture Notes in Computer Science, vol. 1340, Springer, 1997. [9] B.P. Buttenﬁeld and R.B. McMaster, Map generalization: Making rules for knowledge representation, Longman, 1991. [10] M. Cammert, C. Heinz, J. Kr¨ amer, M. Schneider, and B. Seeger, A status report on XXL - a software infrastructure for eﬃcient query processing, IEEE Data Eng. Bull. 26 (2003), no. 2, 12–18. [11] CGAL, Basic library, release 3.0, http://www.cgal.org/Manual, 2003. [12] A. Crauser and K. Mehlhorn, LEDA-SM: Extending LEDA to secondary memory, Lecture Notes in Computer Science 1668 (1999), 228–242. [13] M.T. de Berg, M.J. van Kreveld, M.H. Overmars, and O. Schwarzkopf, Computational geometry: Algorithms and applications (second edition), Springer, 2000. [14] J.-P. Dittrich and B. Seeger, Data redundancy and duplicate detection in spatial join processing, IEEE Int. Conf. on Data Eng., 2000, pp. 535–546. [15] J.-P. Dittrich and B. Seeger, GESS: a scalable similarity-join algorithm for mining large data sets in high dimensional spaces, ACM SIGKDD Conf., 2001, pp. 47–56. [16] D.H. Douglas and T.K. Peucker, Algorithms for the reduction of the number of points required to represent a digitized line or its caricature, Canadian Cartographer 10 (1973), no. 2, 112–122. [17] M.J. Egenhofer, Reasoning about binary topological relations, Symp. on Spatial Databases, Lecture Notes in Computer Science, vol. 525, Springer, 1991, pp. 143–160.

© 2005 by Chapman & Hall/CRC

55-20

Handbook of Data Structures and Applications

[18] C. Esperanca and H. Samet, Experience with SAND-Tcl: A scripting tool for spatial databases, Journal of Visual Languages and Computing 13 (2002), no. 2, 229–255. [19] G. Graefe, Query evaluation techniques for large databases, ACM Computing Surveys 25 (1993), no. 2, 73–170. [20] O. G¨ unther, Eﬃcient computation of spatial joins, IEEE Int. Conf. on Data Eng., 1993, pp. 50–59. [21] C. Gurret, Y. Manolopoulos, A. Papadopoulos, and P. Rigaux, The BASIS system: A benchmarking approach for spatial index structures, Proceedings Spatio-Temporal Database Management Conference (STDBM’99), 1999, pp. 152–170. [22] C. Gurret and P. Rigaux, The sort/sweep algorithm: A new method for R-Tree based spatial joins, Statistical and Scientiﬁc Database Management, 2000, pp. 153–165. [23] R. H. G¨ uting and W. Schilling, A practical divide-and-conquer algorithm for the rectangle intersection problem, Information Sciences 42 (1987), 95–112. [24] R.H. G¨ uting, An introduction to spatial database systems, VLDB Journal 3 (1994), no. 4, 357–399. [25] R.H. G¨ uting and D. Wood, Finding rectangle intersections by divide-and-conquer, IEEE Trans. on Computers 33 (1984), no. 7, 671–675. [26] A. Guttman, R-trees: A dynamic index structure for spatial searching, ACM SIGMOD Conf., 1984, pp. 47–57. [27] J. Han and M. Kamber, Data mining: Concepts and techniques, Morgan Kaufmann, 2001. [28] J. Hershberger and J. Snoeyink, Cartographic line simpliﬁcation and polygon CSG formulæ in O(n log n) time, Computational Geometry, vol. 11, 1998, pp. 175–185. [29] G.R. Hjaltason and H. Samet, Incremental distance join algorithms for spatial databases, ACM SIGMOD Conf., 1998, pp. 237–248. [30] Y.-W. Huang, N. Jing, and E.A. Rundensteiner, Spatial joins using R-trees: Breadthﬁrst traversal with global optimizations, The VLDB Journal, 1997, pp. 396–405. [31] Y.-W. Huang, M.C. Jones, and E.A. Rundensteiner, Improving spatial intersect joins using symbolic intersect detection, SSD, Lecture Notes in Computer Science, vol. 1262, 1997, pp. 165–177. [32] A. Hutﬂesz, H.-W. Six, and P. Widmayer, Globally order preserving multidimensional linear hashing, IEEE Int. Conf. on Data Eng., 1988, pp. 572–579. [33] ISO/IEC 13249-3:2002 FDIS, Information technology - database languages - SQL multimedia and application packages - part 3: Spatial, 2nd edition, 2002. [34] E.H. Jacox and H. Samet, Iterative spatial join, TODS 28 (2003), no. 3, 230–256. [35] R.K.V. Kothuri, S. Ravada, and D. Abugov, Quadtree and R-tree indexes in oracle spatial: a comparison using GIS data, ACM SIGMOD Conf., 2002, pp. 546–557. [36] M. Koubarakis, T.K. Sellis, A.U. Frank, S. Grumbach, R.H. G¨ uting, C.S. Jensen, N.A. Lorentzos, Y. Manolopoulos, E. Nardelli, B. Pernici, H.-J. Schek, M. Scholl, B. Theodoulidis, and N. Tryfona (eds.), Spatio-temporal databases: The Chorochronos Approach, Lecture Notes in Computer Science, vol. 2520, Springer, 2003. [37] N. Koudas and K.C. Sevcik, Size separation spatial join, ACM SIGMOD Conf., 1997, pp. 324–335. [38] R. Laurini and D. Thompson, Fundamentals of spatial information systems, Academic Press, 1992. [39] S. Leutenegger, M. Lopez, and J. Edgington, A simple and eﬃcient algorithm for R-tree packing, IEEE Int. Conf. on Data Eng., 1997, pp. 497–506. [40] M.-L. Lo and C. V. Ravishankar, Spatial joins using seeded trees, ACM SIGMOD Conf., 1994, pp. 209–220.

© 2005 by Chapman & Hall/CRC

Geographic Information Systems

55-21

[41] , Spatial hash-joins, ACM SIGMOD Conf., 1996, pp. 247–258. [42] N. Mamoulis and D. Papadias, Multiway spatial joins, TODS 26 (2001), no. 4, 424– 475. [43] , Slot index spatial join, IEEE Trans. Knowl. Data Eng. 15 (2003), no. 1, 211–231. [44] MapInfo, MapInfo SpatialWare for Microsoft SQL Server v4.8 user guide, http://www.mapinfo.com/common/docs/spatialware/sw48 userguide.pdf, 2003. aher, LEDA : A platform for combinatorial and geometric [45] K. Mehlhorn and S. N¨ computing, Cambridge University Press, 1999. [46] J.-C. M¨ uller, J.-P. Lagrange, and R. Weibel, GIS and generalization: Methodology and practice, Taylor & Francis, London, 1995. [47] G. Neyer, Map labeling with application to graph drawing, Drawing Graphs (M. Kaufmann and D. Wagner, eds.), Lecture Notes in Computer Science, vol. 2025, Springer, 2001, pp. 247–273. [48] G. Neyer and P. Widmayer, Singularities make spatial join scheduling hard, Int. Symp. on Algorithms and Computation, Lecture Notes in Computer Science, vol. 1350, Springer, 1997, pp. 293–302. [49] J. Nievergelt and K. Hinrichs, Algorithms and data structures: With applications to graphics and geometry, Prentice Hall, 1993. [50] J. Nievergelt and F. Preparata, Plane-sweep algorithms for intersecting geometric ﬁgures, CACM 25 (1982), no. 10, 739–747. [51] Open GIS Consortium, OpenGIS simple features speciﬁcation for SQL, revision 1.1, 1999. [52] , OpenGIS Geography Markup Language (GML) Implementation Speciﬁcation, Version 3.0, 2003. Oracle spatial users guide and reference release 9.2, [53] Oracle, http://otn.oracle.com/products/spatial/spatial doc index.html, 2002. [54] J.A. Orenstein, Spatial query processing in an object-oriented database system, ACM SIGMOD Conf., 1986, pp. 326–336. [55] , Redundancy in spatial databases, ACM SIGMOD Conf., 1989, pp. 294–305. , Strategies for optimizing the use of redundancy in spatial databases, Symp. [56] on Spatial Databases, Lecture Notes in Computer Science, vol. 409, 1989, pp. 115–136. [57] , An algorithm for computing the overlay of k–dimensional spaces, Symp. on Spatial Databases, Lecture Notes in Computer Science, vol. 525, 1991, pp. 381–400. [58] R. Pajarola and P. Widmayer, An image compression method for spatial search, IEEE Transactions on Image Processing, vol. 9, 2000, pp. 357–365. [59] D. Papadias, N. Mamoulis, and Y. Theodoridis, Constraint-based processing of multiway spatial joins, Algorithmica 30 (2001), no. 2, 188–215. [60] D. Papadias, Y. Theodoridis, T. Sellis, and M. Egenhofer, Topological relations in the world of minimum bounding rectangles, ACM SIGMOD Conf., 1995, pp. 92–103. [61] J.M. Patel and D.J. DeWitt, Partition based spatial-merge join, ACM SIGMOD Conf., 1996, pp. 259–270. [62] F.P. Preparata and M.I. Shamos, Computational geometry: An introduction, Springer, 1985. [63] P. Rigaux, M. Scholl, L. Segouﬁn, and S. Grumbach, Building a constraint-based spatial database system: Model, languages, and implementation, Information Systems 28 (2003), no. 6, 563–595. [64] P. Rigaux, M.O. Scholl, and A. Voisard, Spatial databases: With application to GIS, Morgan Kaufmann, 2001. [65] H. Sagan, Space ﬁlling curves, Springer, 1994.

© 2005 by Chapman & Hall/CRC

55-22

Handbook of Data Structures and Applications

[66] H. Samet, Applications of spatial data structures, Addison-Wesley, 1989. , The design and analysis of spatial data structures, Addison–Wesley, 1989. [67] [68] S. Shekhar and S. Chawla, Spatial databases: A tour, Prentice Hall, 2003. [69] S. Shekhar and D.-R. Liu, CCAM: A connectivity-clustered access method for networks and network computations, IEEE Trans. Knowl. Data Eng. 9 (1997), no. 1, 102–119. [70] S. Shekhar, P. Zhang, Y. Huang, and R. Vatsavai, Trends in spatial data mining, to appear in: Data mining: Next generation challenges and future directions, AAAI/MIT Press, 2004. [71] H. Shin, B. Moon, and S. Lee, Tie-breaking strategies for fast distance join processing, Data and Knowledge Engineering 41 (2002), no. 1, 67–83. [72] H.-W. Six and D. Wood, The rectangle intersection problem revisited, BIT 20 (1980), no. 4, 426–433. [73] Y. Theodoridis, E. Stefanakis, and T.K. Sellis, Eﬃcient cost models for spatial queries using R-Trees, IEEE Trans. Knowl. Data Eng. 12 (2000), no. 1, 19–32. [74] W. Tobler, Cellular geography, Philosophy in Geography, 1979, pp. 379–386. [75] M.J. van Kreveld, J. Nievergelt, T. Roos, and P. Widmayer (eds.), Algorithmic foundations of geographic information systems, Lecture Notes in Computer Science, vol. 1340, Springer, 1997. [76] Vivid Solutions, JTS topology suite technical speciﬁcations version 1.4, http://www.vividsolutions.com/jts/, 2003.

© 2005 by Chapman & Hall/CRC

56 Collision Detection 56.1 56.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Convex Polytopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

56-1 56-3

Linear Programming • Voronoi-Based Marching Algorithm • Minkowski Sums and Convex Optimization

56.3

General Polygonal Models . . . . . . . . . . . . . . . . . . . . . . . .

56-6

Interference Detection using Trees of Oriented Bounding Boxes • Performance of Bounding Volume Hierarchies

56.4

Ming C. Lin University of North Carolina, Chapel Hill

56.5

Dinesh Manocha University of North Carolina, Chapel Hill

56.1

Penetration Depth Computation . . . . . . . . . . . . . . . . . 56-11 Convex Polytopes • Incremental Penetration Depth Computation • Non-Convex Models

Large Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-14 Multiple-Object Collision Detection Two-Dimensional Intersection Tests

•

Introduction

In a geometric context, collision detection refers to checking the relative conﬁguration of two or more objects. The goal of collision detection, also known as interference detection or contact determination, is to automatically report a geometric contact when it is about to occur or has actually occurred. The objects may be represented as polygonal objects, spline or algebraic surfaces, deformable models, etc. Moreover, the objects may be static or dynamic. Collision detection is a fundamental problem in computational geometry and frequently arises in diﬀerent applications. These include: 1. Physically-based Modeling and Dynamic Simulation: The goal is to simulate dynamical systems and the physical behavior of objects subject to dynamic constraints. The mathematical model of the system is speciﬁed using geometric representations of the objects and the diﬀerential equations that govern the dynamics. The objects may undergo rigid or non-rigid motion. The contact interactions and trajectories of the objects are aﬀected by collisions. It is important to model object interactions precisely and compute all the contacts accurately [1]. 2. Motion Planning: The goal of motion planning is to compute a collision free path for a robot from a start conﬁguration to a goal conﬁguration. Motion planning is a fundamental problem in algorithmic robotics [2]. Most of the practical algorithms for motion planning compute diﬀerent conﬁgurations of the robot and

56-1

© 2005 by Chapman & Hall/CRC

56-2

Handbook of Data Structures and Applications

check whether these conﬁgurations are collision-free, i.e. no collision between the robot and the objects in the environment. For example, probabilistic roadmap planners can spend up to 90% of the running time in collision checking. 3. Virtual Environments and Walkthroughs: A large-scale virtual environment, like a walkthrough, creates a computer-generated world, ﬁlled with real, simulated or virtual entities. Such an environment should give the user a feeling of presence, which includes making the images of both the user and the surrounding objects feel solid. For example, the objects should not pass through each other, and things should move as expected when pushed, pulled or grasped. Such actions require accurate and interactive collision detection. Moreover, runtime performance is critical in a virtual environment and all collision computations need to be performed at less than 1/30th of a second to give a sense of presence [3]. 4. Haptic Rendering: Haptic interfaces, or force feedback devices, improve the quality of human-computer interaction by accommodating the sense of touch. In order to maintain a stable haptic system while displaying smooth and realistic forces and torques, haptic update rates must be as high as 1000 Hz. This involves accurately computing all contacts between the object attached to the probe and the simulated environment, as well as the restoring forces and torques – all in less than one millisecond [4]. In each of these applications, collision detection is one of the major computational bottlenecks. Collision detection has been extensively studied in the literature for more than four decades. Hundreds of papers have been published on diﬀerent aspects in computational geometry and related areas like robotics, computer graphics, virtual environments and computer-aided design. Most of the algorithms are designed to check whether a pair of objects collide. Some algorithms have been proposed for large environments composed of multiple objects and perform some form of culling or localize pairs of objects that are potentially colliding. At a broad level, diﬀerent algorithms for collision detection can be classiﬁed based on the following characteristics: • Query Type: The basic collision query checks whether two objects, described as set of points, polygons or other geometric primitives, overlap. This is the boolean form of the query. The enumerative version of the query yields some representations of the intersection set. Other queries compute the separation distance between two non-overlapping objects or the penetration distance between two overlapping objects. • Object Types: Diﬀerent algorithms have been proposed for convex polytopes, general polygonal models, curved objects described using parametric splines or implicit functions, set-theoretic combinations of objects, deformable models, etc. • Motion Formulation: The collision query can be augmented by adding the element of time. If the trajectories of two objects are known, then we can determine when is the next time that a particular boolean query will become true or false. These queries are called dynamic queries, whereas the ones that do not use motion information are called static queries. In the case where the motion of an object can not be represented as a closed form function of time, the underlying application often performs static queries at speciﬁc time steps in the application. In this chapter, we give a brief survey of diﬀerent collision detection algorithms for convex polytopes, general polygonal models, penetration computations and large-scaled environments composed of multiple objects. In each category, we give a detailed description of one

© 2005 by Chapman & Hall/CRC

Collision Detection

56-3

of the algorithms and the underlying data structures.

56.2

Convex Polytopes

In this section, we give a brief survey of algorithms for collision detection between a pair of convex polytopes. This problem has been extensively studied and a number of algorithms with good asymptotic performance have been proposed. The best known runtime algorithm for boolean collision queries takes O(log 2 n) time, where n is the number of features [5]. It precomputes the Dobkin-Kirkpatrick hierarchy for each polytope and uses it to perform the runtime query. In practice, three classes of algorithms are commonly used for convex polytopes. These are linear programming, Minkowski sums, and tracking closest features based on Voronoi diagrams.

56.2.1

Linear Programming

The problem of checking whether two convex polytopes intersect or not can be posed as a linear programming (LP) problem. In particular, two convex polytopes do not overlap, if and only if there exists a separation plane between them. The coeﬃcients of the separation plane equation are treated as unknowns. The linear constraints are formulated by imposing that all the vertices of the ﬁrst polytope lie in one half-space of this plane and those of the other polytope lie in the other half-space. The linear programming algorithms are used to check whether there is any feasible solution to the given set of constraints. Given the ﬁxed dimension of the problem, some of the well-known linear programming algorithms [6] can be used to perform the boolean collision query in expected linear time.

56.2.2

Voronoi-Based Marching Algorithm

An expected constant time algorithm for collision detection was proposed by Lin and Canny [7, 8]. This algorithm tracks the closest features between two convex polytopes. The features may correspond to a vertex, an edge or a face of each polytope. Variants of this algorithm have also been presented in [9, 10]. The original algorithm basically works by traversing the external Voronoi regions induced by the features of each convex polyhedron toward the pair of the closest features between the two given polytopes. The invariant is that at each step, either the inter-feature distance is reduced or the dimensionality of one or both of the features decreases by one, i.e. a move from a face to an edge or from an edge to a vertex. The algorithm terminates when the pair of testing features contain a pair of points that lie within the Voronoi regions of the other feature. It returns the pair of closest features and the Euclidean distance between them, as well as the contact status (i.e. colliding or not). This algorithm uses a modiﬁed boundary representation to represent convex polytopes and a data structure for describing “Voronoi regions” of convex polytopes. Polytope Representation

Let A be a polytope. A is partitioned into “features” f1 , . . . , fn where n is the total number of features, i.e. n = f + e + v where f, e, v stands for the total number of faces, edges, vertices respectively. Each feature (except vertex) is an open subset of an aﬃne plane and does not contain its boundary. Deﬁnition: B is in the boundary of F and F is in coboundary of B, if and only if B is in the closure of F , i.e. B ⊆ F and B has one fewer dimension than F does.

© 2005 by Chapman & Hall/CRC

56-4

Handbook of Data Structures and Applications

For example, the coboundary of a vertex is the set of edges touching it and the coboundary of an edge are the two faces adjacent to it. The boundary of a face is the set of edges in the closure of the face. It uses winged edge representation, commonly used for boundary evaluation of boolean combinations of solid models [11]. The edge is oriented by giving two incident vertices (the head and tail). The edge points from tail to head. It has two adjacent faces cobounding it as well. Looking from the the tail end toward the head, the adjacent face lying to the right hand side is labeled as the “right face” and similarly for the “left face”. Each polytope’s data structure has a ﬁeld for its features (faces, edges, vertices) and Voronoi cells to be described below. Each feature is described by its geometric parameters. Its data structure also includes a list of its boundary, coboundary, and Voronoi regions. Deﬁnition: A Voronoi region associated with a feature is a set of points exterior to the polyhedron which are closer to that feature than any other. The Voronoi regions form a partition of space outside the polyhedron according to the closest feature. The collection of Voronoi regions of each polyhedron is the generalized Voronoi diagram of the polyhedron. Note that the Voronoi diagram of a convex polyhedron has linear size and consists of polyhedral regions. Deﬁnition: A Voronoi cell is the data structure for a Voronoi region. It has a set of constraint planes that bound its Voronoi region with pointers to the neighboring cells (each of which shares a common constraint plane with the given Voronoi cell) in its data structure. Using the geometric properties of convex sets, “applicability criteria” are established based upon the Voronoi regions. That is, if a point P on object A lies inside the Voronoi region of fB on object B, then fB is a closest feature to the point P . If a point lies on a constraint plane, then it is equi-distant from the two features that share this constraint plane in their Voronoi cells. Local Walk

The algorithm incrementally traverses the features of each polytope to compute the closest features . For example, given a pair of features, Face 1 and vertex Va on objects A and B, respectively, as the pair of initial features (Fig. 56.2.2). The algorithm veriﬁes if the vertex Va lies within Cell 1 of Face 1. However, Va violates the constraint plane imposed by CP of Cell 1, i.e. Va does not line in the half-space deﬁned by CP which contains Cell 1 . The constraint plane CP has a pointer to its adjacent cell Cell 2, so the walk proceeds to test whether Va is contained within Cell 2 . In similar fashion, vertex Va has a cell of its own, and the algorithm checks whether the nearest point Pa on the edge to the vertex Va lies within Va ’s Voronoi cell. Basically, the algorithm checks whether a point is contained within a Voronoi region deﬁned by the constraint planes of the region. The constraint plane, which causes this test to fail, points to the next pair of closest features. Eventually, the algorithm computes the closest pair of features. Since the polytopes and its faces are convex, the containment test involves only the neighboring features of the current candidate features. If either feature fails the test, the algorithm steps to a neighboring feature of one or both candidates, and tries again. With some simple preprocessing, the algorithm can guarantee that every feature of a polytope has a constant number of neighboring features. As a result, it takes a constant number of operations to check whether two features are the closest features.

© 2005 by Chapman & Hall/CRC

Collision Detection

56-5

Object B Cell 1 CP

Va

Cell 2 Face 1

Pa Cell 3

Object A

FIGURE 56.1: A walk across Voronoi cells. Initially, the algorithm checks whether the vertex Va lies in Cell 1. After it fails the containment test with respect to the plane CP, it walks to Cell 2 and checks for containment in Cell 2. This approach can be used in a static environment, but is especially well-suited for dynamic environments in which objects move in a sequence of small, discrete steps. The method takes advantage of coherence within two successive static queries: i.e. the closest features change infrequently as the polytopes move along ﬁnely discretized paths. The closest features computed from the previous positions of the polytopes are used as the initial features for the current positions. The algorithm runs in expected constant time if the polytopes are not moving quickly. Even when a closest feature pair is changing rapidly, the algorithm takes only slightly longer. The running time is proportional to the number of feature pairs traversed, which is a function of the relative motion the polytopes undergo. Implementation and Application

The Lin-Canny algorithm has been implemented as part of several public-domain libraries, include I-COLLIDE and SWIFT [12]. It has been used for diﬀerent applications including dynamic simulation [13], interactive walkthrough of architectural models [3] and haptic display (including force and torque computation) of polyhedral models [14].

56.2.3

Minkowski Sums and Convex Optimization

The collision and distance queries can be performed based on the Minkowski sum of two objects. Given two sets of points, P and Q, their Minkowski sum is the set of points: {p + q | p ∈ P, q ∈ Q.} It has been shown in [15], that the minimum separation distance between two objects is the same as the minimum distance from the origin of the Minkowski sums of A and −B to the surface of the sums. The Minkowski sum is also referred to as the translational C-space obstacle (TCSO) If we take the TCSO of two convex polyhedra, A and B, then the TCSO is another convex polyhedra, and each vertex of the TCSO correspond to the vector diﬀerence

© 2005 by Chapman & Hall/CRC

56-6

Handbook of Data Structures and Applications

of a vertex from A and a vertex from B. While the Minkowski sum of two convex polytopes can have O(n2 ) features [16], a fast algorithm for separation distance computation based on convex optimization that exhibits linear-time performance in practice has been proposed by Gilbert et al. [17]. It is also known as the GJK algorithm. It uses pairs of vertices from each object that deﬁne simplices (i.e. a point, bounded line, triangle or tetrahedron) within each polyhedra and a corresponding simplex in the TCSO. Initially the simplex is set randomly and the algorithm reﬁnes it using local optimization, till it computes the closest point on the TCSO from the origin of the Minkowski sums. The algorithm assumes that the origin is not inside the TCSO. By taking the similar philosophy as the Lin-Canny algorithm [8], Cameron [18] presented an extension to the basic GJK algorithm by exploiting motion coherence and geometric locality in terms of connectivity between neighboring features. It keeps track of the witness points, a pair of points from the two objects that realize the minimum separation distance between them. As opposed to starting from a random simplex in the TCSO, the algorithm starts with the witness points from the previous iteration and performs hill climbing to compute a new set of witness points for the current conﬁguration. The running time of this algorithm is a function of the number of reﬁnement steps that the algorithm has to perform.

56.3

General Polygonal Models

Algorithms for collision and separation distance queries between general polygons models can be classiﬁed based on the fact whether they are closed polyhedral models or represented as a collection of polygons. The latter, also referred to as “polygon soups”, make no assumption related to the connectivity among diﬀerent faces or whether they represent a closed set. Some of the commonly known algorithms for collision detection and separation distance computation use spatial partitioning or bounding volume hierarchies (BVHs) . The spatial subdivisions are a recursive partitioning of the embedding space, whereas bounding volume hierarchies are based on a recursive partitioning of the primitives of an object. These algorithms are based on the divide-and-conquer paradigm. Examples of spatial partitioning hierarchies include k-D trees and octrees [19], R-trees and their variants [20], cone trees, BSPs [21] and their extensions to multi-space partitions [22]. The BVHs use bounding volumes (BVs) to bound or contain sets of geometric primitives, such as triangles, polygons, curved surfaces, etc. In a BVH, BVs are stored at the internal nodes of a tree structure. The root BV contains all the primitives of a model, and children BVs each contain separate partitions of the primitives enclosed by the parent. Each of the leaf node BVs typically contains one primitive. In some variations, one may place several primitives at a leaf node, or use several volumes to contain a single primitive. The BVHs are used to perform collision and separation distance queries. These include sphere-trees [23, 24], AABB-trees [20, 25, 26], OBB-trees [27–29], spherical shell-trees [30, 31], k-DOP-trees [32, 33], SSV-trees [34], and convex hull-trees [35]. Diﬀerent BVHs can be classiﬁed based on: • Choice of BV: The AABB-tree uses an axis-aligned bounding box (AABB) as the underlying BV. The AABB for a set of primitives can be easily computed from the extremal points along the X, Y and Z direction. The sphere tree uses a sphere as the underlying BV. Algorithms to compute a minimal bounding sphere for a set of points in 3D are well known in computational geometry. The kDOP-tree is an extension of the AABB-tree, where each BV is computed from extremal points along k ﬁxed directions, as opposed to the 3 orthogonal axes.

© 2005 by Chapman & Hall/CRC

Collision Detection

56-7

A spherical shell is a subset of the volume contained between two concentric spheres and is a tight ﬁtting BV. A SSV (swept sphere volume) is deﬁned by taking the Minkowski sum of a point, line or a rectangle in 3D with a sphere. The SSV-tree corresponds to a hybrid hierarchy, where the BVs may correspond to a point-swept sphere (PSS), a line-swept sphere (LSS) or a rectangle-swept sphere (RSS). Finally, the BV in the convex-hull tree is a convex polytope. • Hierarchy generation: Most of the algorithms for building hierarchies fall into two categories: bottom-up and top-down. Bottom-up methods begin with a BV for each primitive and merge volumes into larger volumes until the tree is complete. Top-down methods begin with a group of all primitive, and recursively subdivide until all leaf nodes are indivisible. In practice, top-down algorithms are easier to implement and typically take O(n lg n) time, where n is the number of primitives. On the other hand, the bottom-up methods use clustering techniques to group the primitives at each level and can lead to tighter-ﬁtting hierarchies. The collision detection queries are performed by traversing the BVHs. Two models are compared by recursively traversing their BVHs in tandem. Each recursive step tests whether BVs A and B, one from each hierarchy, overlap. If A and B do not overlap, the recursion branch is terminated. But if A and B overlap, the enclosed primitives may overlap and the algorithm is applied recursively to their children. If A and B are both leaf nodes, the primitives within them are compared directly. The running time of the algorithm is dominated by the overlap tests between two BVs and a BV and a primitive. It is relatively simple to check whether two AABBs overlap or two spheres overlap or two k-DOPs overlap. Specialized algorithms have also been proposed to check whether two OBBs, two SSVs, two spherical shells or two convex polytopes overlap. Next, we described a commonly used interference detection algorithm that uses hierarchies of oriented bounding boxes.

56.3.1

Interference Detection using Trees of Oriented Bounding Boxes

In this section we describe an algorithm for building a BVH of OBBs (called OBBTree) and using them to perform fast interference queries between polygonal models. More details about the algorithm are available in [27, 29]. The underlying algorithm is applicable to all triangulated models. They need not represent a compact set or have a manifold boundary representation. As part of a preprocess, the algorithm computes a hierarchy of oriented bounding boxes (OBBs) for each object. At runtime, it traverses the hierarchies to check whether the primitives overlap. OBBTree Construction

An OBBTree is a bounding volume tree of OBBs. Given a collection of triangles, the algorithm initially approximates them with an OBB of similar dimensions and orientation. Next, it computes a hierarchy of OBBs. The OBB computation algorithm makes use of ﬁrst and second order statistics summarizing the vertex coordinates. They are the mean, µ, and the covariance matrix, C, respectively [36]. If the vertices of the i’th triangle are the points pi , qi , and ri , then the mean and covariance matrix can be expressed in vector notation as: 1 i µ= (p + qi + ri ), 3n i=0 n

© 2005 by Chapman & Hall/CRC

56-8

Handbook of Data Structures and Applications

FIGURE 56.2: Building the OBBTree: recursively partition the bounded polygons and bound the resulting groups. This ﬁgure shows three levels of an OBBTree of a polygonal chain. 1 i i (p p + qij qik + rij rik ), 3n i=0 j k n

Cjk =

1 ≤ j, k ≤ 3

where n is the number of triangles, pi = pi − µ, qi = qi − µ, and ri = ri − µ. Each of them is a 3 × 1 vector, e.g. pi = (pi1 , pi2 , pi3 )T and Cjk are the elements of the 3 by 3 covariance matrix. The eigenvectors of a symmetric matrix, such as C, are mutually orthogonal. After normalizing them, they are used as a basis. The algorithm ﬁnds the extremal vertices along each axis of this basis. Two of the three eigenvectors of the covariance matrix are the axes of maximum and of minimum variance, so they will tend to align the box with the geometry of a tube or a ﬂat surface patch. The algorithm’s performance can be improved by using the convex hull of the vertices of the triangles. To get a better ﬁt, we can sample the surface of the convex hull densely, taking the mean and covariance of the sample points. The uniform sampling of the convex hull surface normalizes for triangle size and distribution. One can sample the convex hull “inﬁnitely densely” by integrating over the surface of each triangle, and allowing each diﬀerential patch to contribute to the covariance matrix. The resulting integral has a closed form solution. Let the area of the i’th triangle in the convex hull be denoted by 1 Ai = |(pi − qi ) × (pi − ri )| 2 Let the surface area of the entire convex hull be denoted by AH =

Ai

i

Let the centroid of the i’th convex hull triangle be denoted by ci = (pi + qi + ri )/3 Let the centroid of the convex hull, which is a weighted average of the triangle centroids (the weights are the areas of the triangles), be denoted by i i i i Ac Ac cH = i i = i H A A i

© 2005 by Chapman & Hall/CRC

Collision Detection

56-9

The elements of the covariance matrix C have the following closed-form, Cjk =

n i=1

Ai i i H 9cj ck + pij pik + qij qik + rij rik − cH j ck H 12A

Given an algorithm to compute tight-ﬁtting OBBs around a group of polygons, we need to represent them hierarchically. The simplest algorithm for OBBTree computation uses a top-down method. It is based on a subdivision rule that splits the longest axis of a box with a plane orthogonal to one of its axes, partitioning the polygons according to which side of the plane their center point lies on (a 2-D analog is shown in Figure 56.3.1). The subdivision coordinate along that axis is chosen to be that of the mean point, µ, of the vertices. If the longest axis cannot not be subdivided, the second longest axis is chosen. Otherwise, the shortest one is used. If the group of polygons cannot be partitioned along any axis by this criterion, then the group is considered indivisible. Given a model with n triangles, the overall time to build the tree is O(n lg2 n) if we use convex hulls, and O(n lg n) if we don’t. The recursion is similar to that of quicksort. Fitting a box to a group of n triangles and partitioning them into two subgroups takes O(n lg n) with a convex hull and O(n) without it. Applying the process recursively creates a tree with leaf nodes O(lg n) levels deep. Interference Detection

Given OBBTrees of two objects, the interference algorithm typically spends most of its time testing pairs of OBBs for overlap. The algorithm computes axial projections of the bounding boxes and check for disjointness along those axes. Under this projection, each box forms an interval on the axis (a line in 3D). If the intervals don’t overlap, then the axis is called a ‘separating axis’ for the boxes, and the boxes must then be disjoint. It has been shown that we need to perform at most 15 axial projections in 3D to check whether two OBBs overlap or not [29]. These 15 directions correspond to the face normals of each OBB, as well as 9 pairwise combinations obtained by taking the cross-product of the vectors representing their edges. To perform the test, the algorithm projects the centers of the boxes onto the axis, and also to compute the radii of the intervals. If the distance between the box centers as projected onto the axis is greater than the sum of the radii, then the intervals (and the boxes as well) are disjoint. This is shown in 2D in Fig. 56.3.1. OBB Representation and Overlap Test

We assume we are given two OBBs, A and B, with B placed relative to A by rotation and translation vector T . The half-dimensions (or ‘radii’) of A and B are ai and matrix R i and B i , for bi , where i = 1, 2, 3. We will denote the axes of A and B as the unit vectors A i = 1, 2, 3. These will be referred to as the 6 box axes. Note that if we use the box axes of are the same as the three B i vectors. A as a basis, then the three columns of R The centers of each box projects onto the midpoint of its interval. By projecting the box radii onto the axis, and summing the length of their images, we obtain the radius of the then the radius of box A’s interval is interval. If the axis is parallel to the unit vector L, i · L| rA = |ai A i

A similar expression is used to compute rB .

© 2005 by Chapman & Hall/CRC

56-10

Handbook of Data Structures and Applications

A b2B2

T

b1B1

B

aA 1

1

a2 A2

rA rB TL

L

is a separating axis for OBBs A and B because A and B become disjoint FIGURE 56.3: L intervals under projection (shown as rA and rB , respectively) onto L. The placement of the axis is immaterial, so we assume it passes through the center of So, the intervals are box A. The distance between the midpoints of the intervals is |T · L|. disjoint if and only if > + i · L| i · L| |T · L| |ai A |bi B i

i

is a box axis or cross product of box axes. For example, consider This simpliﬁes when L 2 . The second term in the ﬁrst summation is =A 1 × B L 1 × B 2 )| = 2 · (A |a2 A = = =

2 × A 1 )| 2 · (A |a2 B 3| 2 · A |a2 B 2| |a2 B 3 32 | a2 |R

The last step is due to the fact that the columns of the rotation matrix are also the axes of the frame of B. The original term consisted of a dot product and cross product, but reduced to a multiplication and an absolute value. Some terms reduce to zero and are eliminated. After simplifying all the terms, this axis test looks like: 32 | + a3 |R 22 | + b1 |R 13 | + b3 |R 11 | 22 − T2 R 32 | > a2 |R |T3 R All 15 axis tests simplify in similar fashion. Among all the tests, the absolute value of is used four times, so those expressions can be computed once before each element of R beginning the axis tests. If any one of the expressions is satisﬁed, the boxes are known to be disjoint, and the remainder of the 15 axis tests are unnecessary. This permits early exit from the series of tests. In practice, it takes up to 200 arithmetic operations in the worst case to check whether two OBBs overlap. Implementation and Application

The OBBTree interference detection algorithm has been implemented and used as part of the following packages: RAPID, V-COLLIDE and PQP [12]. These implementations have

© 2005 by Chapman & Hall/CRC

Collision Detection

56-11

been used for robot motion planning, dynamic simulation and virtual prototyping.

56.3.2

Performance of Bounding Volume Hierarchies

The performance of BVHs on proximity queries is governed by a number of design parameters. These include techniques to build the trees, number of children each node can have, and the choice of BV type. An additional design choice is the descent rule. This is the policy for generating recursive calls when a comparison of two BVs does not prune the recursion branch. For instance, if BVs A and B failed to prune, one may recursively compare A with each of the children of B, B with each of the children of A, or each of the children of A with each the children of B. This choice does not aﬀect the correctness of the algorithm, but may impact the performance. Some of the commonly used algorithms assume that the BVHs are binary trees and each primitive is a single triangle or a polygon. The cost of performing the collision query is given as [27, 34]: T = Nbv × Cbv + Np × Cp , where T is the total cost function for collision queries, Nbv is the number of bounding volume pair operations, and Cbv is the total cost of a BV pair operation, including the cost of transforming and updating (including resizing) each BV for use in a given conﬁguration of the models, and other per BV-operation overhead. Np is the number of primitive pairs tested for proximity, and Cp is the cost of testing a pair of primitives for proximity (e.g. overlaps or distance computation). Typically for tight ﬁtting bounding volumes, e.g., oriented bounding boxes (OBBs), Nbv and Np are relatively low, whereas Cbv is relatively high. In contrast, Cbv is low while Nbv and Np may be higher for simple BV types like spheres and axis-aligned bounding boxes (AABBs). Due to these opposing trends, no single BV yields optimum performance for collision detection in all possible cases.

56.4

Penetration Depth Computation

In this section, we give a brief overview of penetration depth (PD) computation algorithms between convex polytopes and general polyhedral models. The PD of two inter-penetrating objects A and B is deﬁned as the minimum translation distance that one object undergoes to make the interiors of A and B disjoint. It can be also deﬁned in terms of the TCSO. When two objects are overlapping, the origin of the Minkowski sum of A and −B is contained inside the TCSO. The penetration depth corresponds to the minimum distance from the origin to the surface of TCSO [18]. PD computation is often used in motion planning [37], contact resolution for dynamic simulation [38, 39] and force computation in haptic rendering [40]. For example, computation of dynamic response in penalty-based methods often needs to perform PD queries for imposing the non-penetration constraint for rigid body simulation. In addition, many applications, such as motion planning and dynamic simulation, require a continuous distance measure when two (non-convex) objects collide, in order to have a well-posed computation. Some of the algorithms for PD computation involve computing the Minkowski sums and computing the closest point on its surface from the origin. The worst case complexity of the overall PD algorithm is governed by the complexity of computing Minkowski sums, which can be O(n2 ) for convex polytopes and O(n6 ) for general (or non-convex) polyhedral models [16]. Given the complexity of Minkowski sums, many approximation algorithms have been proposed in the literature for fast PD estimation.

© 2005 by Chapman & Hall/CRC

56-12

56.4.1

Handbook of Data Structures and Applications

Convex Polytopes

Dobkin et al. [16] have proposed a hierarchical algorithm to compute the directional PD using Dobkin and Kirkpatrick polyhedral hierarchy. For any direction d, it computes the directional penetration depth in O(log n log m) time for polytopes with m and n vertices. Agarwal et al. [41] have presented a randomized approach to compute the PD values [41]. 3 3 It runs in O(m 4 + n 4 + + m1+ + n1+ ) expected time for any positive constant . Cameron [18] has presented an extension to the GJK algorithm [17] to compute upper and lower bounds on the PD between convex polytopes. Bergen has further elaborated this idea in an expanding polytope algorithm [42]. The algorithm iteratively improves the result of the PD computation by expanding a polyhedral approximation of the Minkowski sums of two polytopes.

56.4.2

Incremental Penetration Depth Computation

Kim et al. [43] have presented an incremental penetration depth (PD) algorithm that marches towards a “locally optimal” solution by walking on the surface of the Minkowski sum. The surface of the TCSO is implicitly computed by constructing a local Gauss map and performing a local walk on the polytopes. This algorithm uses the concept of width computation from computational geometry. Given a set of points P = {p1 , p2 , . . . , pn } in 3D, the width of P , W(P ), is deﬁned as the minimum distance between parallel planes supporting P . The width W(P ) of convex polytopes A and B is closely related to the penetration depth PD(A, B), since it is easy to show that W(P ) = PD(P , P ). It can be shown that width and penetration depth computation can be reduced to searching only the VF and EE antipodal pairs (where V, E and F denote a vertex, edge and face, respectively, of the polytopes). This is accomplished by using the standard dual mapping on the Gauss map (or normal diagram). The mapping is deﬁned from object space to the surface of a unit sphere S2 as: a vertex is mapped to a region, a face to a point, and an edge to a great arc. The algorithm ﬁnds the antipodal pairs by overlaying the upper hemisphere of the Gauss map on the lower hemisphere and computing the intersections between them. Local Walk

The incremental PD computation algorithm does not compute the entire Gauss map for each polytope or the entire boundary of the Minkowski sum. Rather it computes them in a lazy manner based on local walking and optimization. Starting from some feature on the surface of the Minkowski sum, the algorithm computes the direction in which it can decrease the PD value and proceeds towards that direction by extending the surface of the Minkowski sum. At each iteration of the algorithm, a vertex is chosen from each polytope to form a pair. It is called a vertex hub pair and the algorithm uses it as a hub for the expansion of the local Minkowski sum. The vertex hub pair is chosen in such a way that there exists a plane supporting each polytope, and is incident on each vertex. It turns out that the vertex hub pair corresponds to two intersected convex regions on a Gauss map, which later become intersecting convex polygons on the plane after central projection. The intersection of convex polygons corresponds to the VF or EE antipodal pairs that are used to reconstruct the local surface of the Minkowski sum around the vertex hub pair. Given these pairs, the algorithm chooses the one that corresponds to the shortest distance from the origin of the Minkowski sum to their surface. If this pair decreases the estimated PD value, the algorithm updates

© 2005 by Chapman & Hall/CRC

Collision Detection

56-13

the current vertex hub pair to the new adjacent pair. This procedure is repeated until the algorithm can not decrease the current PD value and converges to a local minima. Initialization and Reﬁnement

The algorithm starts with an initial guess on the vertex hub pair. A good estimate to the penetration direction can be obtained by taking the centroid diﬀerence between the objects, and computing an extremal vertex pair for the diﬀerence direction. In other cases, the penetrating features (for overlapping polytopes) or the closest features (from non-overlapping polytopes) from the previous instance can also suggest a good initial guess.

v1

v1 f1

v1

v’1

e1

f2

e2

v2

v’1

f2

v’1

(a)

(b)

(c)

(d)

(e)

FIGURE 56.4: Iterative optimization for incremental PD computation: (a) The current VV pair is v1 v1 and a shaded region represents edges and faces incident to v1 v1 . (b) shows local Gauss maps and their overlay for v1 v1 . (c) shows the result of the overlay after central projection onto a plane. Here, f1 , e1 , f2 and e2 comprise vertices (candidate PD features) of the overlay. (d) illustrates how to compute the PD for the candidate PD features in object space. (e) f2 is chosen as the next PD feature, thus v2 v2 is determined as the next vertex hub pair. After the algorithm obtains a initial guess for a VV pair, it iteratively seeks to improve the PD estimate by jumping from one VV pair to an adjacent VV pair. This is accomplished by looking around the neighborhood of the current VV pair and walking to a pair which provides the greatest improvement in the PD value. Let the current vertex hub pair be v1 v1 . The next vertex hub pair v2 v2 is computed as follows: 1. Construct a local Gauss map each for v1 and v1 , 2. Project the Gauss maps onto z = 1 plane, and label them as G and G , respectively. G and G correspond to convex polygons in 2D. 3. Compute the intersection between G and G using a linear time algorithm such as [44]. The result is a convex polygon and let ui be a vertex of the intersection set. If ui is an original vertex of G or G , it corresponds to the VF antipodal pair in object space. Otherwise, it corresponds to an EE antipodal pair. 4. In object space, determine which ui corresponds to the best local improvement in PD, and set an adjacent vertex pair (adjacent to ui ) to v2 v2 . This iteration is repeated until either there is no more improvement in the PD value or number of iterations reach some maximum value. At step 4 of the iteration, the next vertex

© 2005 by Chapman & Hall/CRC

v’2

56-14

Handbook of Data Structures and Applications

hub pair is selected in the following manner. If ui corresponds to VF, then the algorithm chooses one of the two vertices adjacent to F assuming that the model is triangulated. The same reasoning is also applied to when ui corresponds to EE. As a result, the algorithm needs to perform one more iteration in order to actually decide which vertex hub pair should be selected. A snapshot of a typical step during the iteration is illustrated in Figure 56.4. Eventually the algorithm computes a local minima. Implementation and Application

The incremental algorithm is implemented as part of DEEP [12]. It works quite well in practice and is also able to compute the global penetration depth in most cases. It has been used for 6-DOF haptic rendering (force and torque display), dynamic simulation and virtual prototyping.

56.4.3

Non-Convex Models

Algorithms for penetration depth estimation between general polygonal models are based on discretization of the object space containing the objects or use of digital geometric algorithms that perform computations on a ﬁnite resolution grid. Fisher and Lin [45] have presented a PD estimation algorithm based on the distance ﬁeld computation using the fast marching level-set method. It is applicable to all polyhedral objects as well as deformable models, and it can also check for self-penetration. Hoﬀ et al. [46, 47] have proposed an approach based on performing discretized computations on the graphics rasterization hardware . It uses multi-pass rendering techniques for diﬀerent proximity queries between general rigid and deformable models, including penetration depth estimation. Kim et al. [43] have presented a fast approximation algorithm for general polyhedral models using a combination of object-space as well discretized computations. Given the global nature of the PD problem, it decomposes the boundary of each polyhedron into convex pieces, computes the pairwise Minkowski sums of the resulting convex polytopes and uses graphics rasterization hardware to perform the closest point query up to a given discretized resolution. The results obtained are reﬁned using a local walking algorithm. To further speed up this computation and improve the estimate, the algorithm uses a hierarchical reﬁnement technique that takes advantage of geometry culling, model simpliﬁcation, accelerated ray-shooting, and local reﬁnement with greedy walking. The overall approach combines discretized closest point queries with geometry culling and reﬁnement at each level of the hierarchy. Its accuracy can vary as a function of the discretization error. It has been applied to haptic rendering and dynamic simulation.

56.5

Large Environments

Large environments are composed of multiple moving objects. Diﬀerent methods have been proposed to overcome the computational bottleneck of O(n2 ) pairwise tests in an environment composed of n objects. The problem of performing proximity queries in large environments, is typically divided into two parts [3, 23]: the broad phase, in which we identify the pair of objects on which we need to perform diﬀerent proximity queries, and the narrow phase, in which we perform the exact pairwise queries. In this section, we present a brief overview of algorithms used in the broad phase. The simplest algorithms for large environments are based on spatial subdivisions. The space is divided into cells of equal volume, and at each instance the objects are assigned to one or more cells. Collisions are checked between all object pairs belonging to each

© 2005 by Chapman & Hall/CRC

Collision Detection

56-15

Architecture for Multi-body Collision Detection object transformations

overlapping pairs

Pruning Multi-body Pairs

Pairwise Exact Collision Detection

Simulation

colliding pairs

response parameters Analysis/ Response

FIGURE 56.5: Architecture for multiple body collision detection algorithm.

cell. In fact, Overmars has presented an eﬃcient algorithm based on hash table to eﬃcient perform point location queries in fat subdivisions [48]. This approach works well for sparse environments in which the objects are uniformly distributed through the space. Another approach operates directly on four-dimensional volumes swept out by object motion over time [49].

56.5.1

Multiple-Object Collision Detection

Large-scale environments consist of stationary as well as moving objects. Let there be N moving objects and M stationary objects. Each of the N moving objects can collide with the other moving objects, as well as with the stationary ones. Keeping track of N + N M pairs of objects at every time step can become time consuming as N and 2 M get large. To achieve interactive rates, we must reduce this number before performing pairwise collision tests. In this section, we give an overview of sweep-and-prune algorithm used to perform multiple-object collision detection [3]. The overall architecture of the multiple object collision detection algorithm is shown in Fig. 56.5.1. The algorithm uses sorting to prune the number of pairs. Each object is surrounded by a 3-dimensional bounding volume. These bounding volumes are sorted in 3-space to determine which pairs are overlapping. The algorithm only needs to perform exact pairwise collision tests on these remaining pairs. However, it is not intuitively obvious how to sort objects in 3-space. The algorithm uses a dimension reduction approach . If two bodies collide in a 3-dimensional space, their orthogonal projections onto the xy, yz, and xz-planes and x, y, and z-axes must overlap. Based on this observation, the algorithm uses axis-aligned bounding boxes and eﬃciently project them onto a lower dimension, and perform sorting on these lower-dimensional structures. The algorithm computes a rectangular bounding box to be the tightest axis-aligned box

© 2005 by Chapman & Hall/CRC

56-16

Handbook of Data Structures and Applications

containing each object at a particular orientation. It is deﬁned by its minimum and maximum x, y, and z-coordinates. As an object moves, the algorithm recomputes its minima and maxima, taking into account the object’s orientation. As a precomputation, the algorithm computes each object’s initial minima and maxima along each axis. It is assumed that the objects are convex. For non-convex polyhedral models, the following algorithm is applied to their convex hulls. As an object moves, its minima and maxima are recomputed in the following manner: 1. Check to see if the current minimum (or maximum) vertex for the x, y, or zcoordinate still has the smallest (or largest) value in comparison to its neighboring vertices. If so the algorithm terminates. 2. Update the vertex for that extreme direction by replacing it with the neighboring vertex with the smallest (or largest) value of all neighboring vertices. Repeat the entire process as necessary. This algorithm recomputes the bounding boxes at an expected constant rate. It exploits the temporal and geometric coherence. The algorithm does not transform all the vertices as the objects undergo motion. As it is updating the bounding boxes, new positions are computed for current vertices using matrixvector multiplications. This approach is optimized based on the fact that the algorithm is interested in one coordinate value of each extremal vertex, say the x coordinate while updating the minimum or maximum value along the x-axis. Therefore, there is no need to transform the other coordinates in order to compare neighboring vertices. This reduces the number of arithmetic operations by two-thirds, as we only compute a dot-product of two vectors and do not perform matrix-vector multiplication. One-Dimensional Sweep and Prune

The one-dimensional sweep and prune algorithm begins by projecting each three-dimensional bounding box onto the x, y, and z axes. Because the bounding boxes are axis-aligned, projecting them onto the coordinate axes results in intervals (see Fig. 56.5.1). The goal is to compute the overlaps among these intervals, because a pair of bounding boxes can overlap if and only if their intervals overlap in all three dimensions. The algorithm constructs three lists, one for each dimension. Each list contains the values of the endpoints of the intervals corresponding to that dimension. By sorting these lists, it determines which intervals overlap. In the general case, such a sort would take O(n log n) time, where n is the number of objects. This time bound is reduced by keeping the sorted lists from the previous frame, changing only the values of the interval endpoints. In environments where the objects make relatively small movements between frames, the lists will be nearly sorted, so we can sort in expected O(n) time, as shown in [50, 51]. In practice, insertion sort works well for almost sorted lists . In addition to sorting, the algorithm keeps track of changes in the overlap status of interval pairs (i.e. from overlapping in the last time step to non-overlapping in the current time step, and vice-versa). This can be done in O(n + ex + ey + ez ) time, where ex , ey , and ez are the number of exchanges along the x, y, and z-axes. This also runs in expected linear time due to coherence, but in the worst case ex , ey , and ez can each be O(n2 ) with an extremely small constant. This algorithm is suitable for dynamic environments where coherence between successive static queries is preserved. In computational geometry literature several algorithms exist that solve the static version of determining 3-D bounding box overlaps in O(n log2 n + s)

© 2005 by Chapman & Hall/CRC

Collision Detection

56-17

t=1

b1 e1 b2

e2

b3

b4 e3

e4

t=2

b1 e1

b2 b3 e2

e3

b4

e4

FIGURE 56.6: Bounding box behavior between successive instances. Notice the coherence between the 1D list obtained after projection onto the X-axis.

time, where s is the number of pairwise overlaps [52, 53]. It has been reduced to to O(n + s) by exploiting coherence. Implementation and Application

The sweep-and-prune has been used in some of the widely uses collision detection systems, including I-COLLIDE, V-COLLIDE, SWIFT and SWIFT++ [12]. It has been used for multi-body simulations and interactive walkthroughs of complex environments.

56.5.2

Two-Dimensional Intersection Tests

The two-dimensional intersection algorithm begins by projecting each three-dimensional axis-aligned bounding box onto any two of the x-y, x-z, and y-z planes. Each of these projections is a rectangle in 2-space. Typically there are fewer overlaps of these 2-D rectangles than of the 1-D intervals used by the sweep and prune technique. This results in fewer swaps as the objects move. In situations where the projections onto one-dimension result in densely clustered intervals, the two-dimensional technique is more eﬃcient. The interval tree is a common data structure for performing such two-dimensional range queries [54]. Each query of an interval intersection takes O(log n + k) time where k is the number of reported intersections and n is the number of intervals. Therefore, reporting intersections among n rectangles can be done in O(n log n+K) where K is the total number of intersecting rectangles [55].

References [1] D. Baraﬀ and A. Witkin, Physically-Based Modeling. ACM SIGGRAPH Course Notes, 2001. [2] J. Latombe, Robot Motion Planning. Kluwer Academic Publishers, 1991. [3] J. Cohen, M. Lin, D. Manocha, and M. Ponamgi, “I-collide: An interactive and exact

© 2005 by Chapman & Hall/CRC

56-18

[4] [5]

[6] [7]

[8] [9]

[10] [11] [12] [13] [14] [15]

[16] [17]

[18]

[19] [20]

[21] [22]

[23]

Handbook of Data Structures and Applications

collision detection system for large-scale environments,” in Proc. of ACM Interactive 3D Graphics Conference, pp. 189–196, 1995. M. A. Otaduy and M. C. Lin, “Sensation preserving simpliﬁcation for haptic rendering,” Proc. of ACM SIGGRAPH, 2003. D. P. Dobkin and D. G. Kirkpatrick, “Determining the separation of preprocessed polyhedra – a uniﬁed approach,” in Proc. 17th Internat. Colloq. Automata Lang. Program., vol. 443 of Lecture Notes in Computer Science, pp. 400–413, SpringerVerlag, 1990. R. Seidel, “Linear programming and convex hulls made easy,” in Proc. 6th Ann. ACM Conf. on Computational Geometry, (Berkeley, California), pp. 211–215, 1990. M. Lin, Eﬃcient Collision Detection for Animation and Robotics. PhD thesis, Department of Electrical Engineering and Computer Science, University of California, Berkeley, December 1993. M. Lin and J. F. Canny, “Eﬃcient algorithms for incremental distance computation,” in IEEE Conference on Robotics and Automation, pp. 1008–1014, 1991. S. Ehmann and M. C. Lin, “Accelerated proximity queries between convex polyhedra using multi-level voronoi marching,” Proc. of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2101–2106, 2000. B. Mirtich, “V-Clip: Fast and robust polyhedral collision detection,” ACM Transactions on Graphics, vol. 17, pp. 177–208, July 1998. C. Hoﬀmann, Geometric and Solid Modeling. San Mateo, California: Morgan Kaufmann, 1989. “Collision detection systems.” http://gamma.cs.unc.edu/collide/packages.shtml, 2002. B. Mirtich and J. Canny, “Impulse-based simulation of rigid bodies,” in Proc. of ACM Interactive 3D Graphics, (Monterey, CA), 1995. A. Gregory, A. Mascarenhas, S. Ehmann, M. C. Lin, and D. Manocha, “6-dof haptic display of polygonal models,” Proc. of IEEE Visualization Conference, 2000. S. Cameron and R. K. Culley, “Determining the minimum translational distance between two convex polyhedra,” Proceedings of International Conference on Robotics and Automation, pp. 591–596, 1986. D. Dobkin, J. Hershberger, D. Kirkpatrick, and S. Suri, “Computing the intersectiondepth of polyhedra,” Algorithmica, vol. 9, pp. 518–533, 1993. E. G. Gilbert, D. W. Johnson, and S. S. Keerthi, “A fast procedure for computing the distance between objects in three-dimensional space,” IEEE J. Robotics and Automation, vol. vol RA-4, pp. 193–203, 1988. S. Cameron, “Enhancing GJK: Computing minimum and penetration distance between convex polyhedra,” Proceedings of International Conference on Robotics and Automation, pp. 3112–3117, 1997. H. Samet, Spatial Data Structures: Quadtree, Octrees and Other Hierarchical Methods. Addison Wesley, 1989. M. Held, J. Klosowski, and J. Mitchell, “Evaluation of collision detection methods for virtual reality ﬂy-throughs,” in Canadian Conference on Computational Geometry, 1995. B. Naylor, J. Amanatides, and W. Thibault, “Merging bsp trees yield polyhedral modeling results,” in Proc. of ACM SIGGRAPH, pp. 115–124, 1990. W. Bouma and G. Vanecek, “Collision detection and analysis in a physically based simulation,” Proceedings Eurographics workshop on animation and simulation, pp. 191–203, 1991. P. M. Hubbard, “Interactive collision detection,” in Proceedings of IEEE Symposium on Research Frontiers in Virtual Reality, October 1993.

© 2005 by Chapman & Hall/CRC

Collision Detection

56-19

[24] S. Quinlan, “Eﬃcient distance computation between non-convex objects,” in Proceedings of International Conference on Robotics and Automation, pp. 3324–3329, 1994. [25] N. Beckmann, H. Kriegel, R. Schneider, and B. Seeger, “The r*-tree: An eﬃcient and robust access method for points and rectangles,” Proc. SIGMOD Conf. on Management of Data, pp. 322–331, 1990. [26] M. Ponamgi, D. Manocha, and M. Lin, “Incremental algorithms for collision detection between solid models,” IEEE Transactions on Visualization and Computer Graphics, vol. 3, no. 1, pp. 51–67, 1997. [27] S. Gottschalk, M. Lin, and D. Manocha, “OBB-Tree: A hierarchical structure for rapid interference detection,” Proc. of ACM Siggraph’96, pp. 171–180, 1996. [28] G. Barequet, B. Chazelle, L. Guibas, J. Mitchell, and A. Tal, “Boxtree: A hierarchical representation of surfaces in 3D,” in Proc. of Eurographics’96, 1996. [29] S. Gottschalk, Collision Queries using Oriented Bounding Boxes. PhD thesis, University of North Carolina. Department of Computer Science, 2000. [30] S. Krishnan, A. Pattekar, M. Lin, and D. Manocha, “Spherical shell: A higher order bounding volume for fast proximity queries,” in Proc. of Third International Workshop on Algorithmic Foundations of Robotics, pp. 122–136, 1998. [31] S. Krishnan, M. Gopi, M. Lin, D. Manocha, and A. Pattekar, “Rapid and accurate contact determination between spline models using shelltrees,” Computer Graphics Forum, Proceedings of Eurographics, vol. 17, no. 3, pp. C315–C326, 1998. [32] M. Held, J. Klosowski, and J. S. B. Mitchell, “Real-time collision detection for motion simulation within complex environments,” in Proc. ACM SIGGRAPH’96 Visual Proceedings, p. 151, 1996. [33] J. Klosowski, M. Held, J. Mitchell, H. Sowizral, and K. Zikan, “Eﬃcient collision detection using bounding volume hierarchies of k-dops,” IEEE Trans. on Visualization and Computer Graphics, vol. 4, no. 1, pp. 21–37, 1998. [34] E. Larsen, S. Gottschalk, M. Lin, and D. Manocha, “Fast proximity queries with swept sphere volumes,” Tech. Rep. TR99-018, Department of Computer Science, University of North Carolina, 1999. 32 pages. [35] S. Ehmann and M. C. Lin, “Accurate and fast proximity queries between polyhedra using convex surface decomposition,” Computer Graphics Forum (Proc. of Eurographics’2001), vol. 20, no. 3, pp. 500–510, 2001. [36] R. Duda and P. Hart, Pattern Classiﬁcation and Scene Analysis. John Wiley and Sons, 1973. [37] D. Hsu, L. Kavraki, J. Latombe, R. Motwani, and S. Sorkin, “On ﬁnding narrow passages with probabilistic roadmap planners,” Proc. of 3rd Workshop on Algorithmic Foundations of Robotics, pp. 25–32, 1998. [38] M. McKenna and D. Zeltzer, “Dynamic simulation of autonomous legged locomotion,” in Computer Graphics (SIGGRAPH ’90 Proceedings) (F. Baskett, ed.), vol. 24, pp. 29–38, Aug. 1990. [39] D. E. Stewart and J. C. Trinkle, “An implicit time-stepping scheme for rigid body dynamics with inelastic collisions and coulomb friction,” International Journal of Numerical Methods in Engineering, vol. 39, pp. 2673–2691, 1996. [40] Y. Kim, M. Otaduy, M. Lin, and D. Manocha, “6-dof haptic display using localized contact computations,” Proc. of Haptics Symposium, pp. 209–216, 2002. [41] P. Agarwal, L. Guibas, S. Har-Peled, A. Rabinovitch, and M. Sharir, “Penetration depth of two convex polytopes in 3d,” Nordic J. Computing, vol. 7, pp. 227–240, 2000. [42] G. Bergen, “Proximity queries and penetration depth computation on 3d game objects,” Game Developers Conference, 2001.

© 2005 by Chapman & Hall/CRC

56-20

Handbook of Data Structures and Applications

[43] Y. Kim, M. Lin, and D. Manocha, “Deep: An incremental algorithm for penetration depth computation between convex polytopes,” Proc. of IEEE Conference on Robotics and Automation, pp. 921–926, 2002. [44] J. O’Rourke, C.-B. Chien, T. Olson, and D. Naddor, “A new linear algorithm for intersecting convex polygons,” Comput. Graph. Image Process., vol. 19, pp. 384–391, 1982. [45] S. Fisher and M. C. Lin, “Deformed distance ﬁelds for simulation of non-penetrating ﬂexible bodies,” Proc. of EG Workshop on Computer Animation and Simulation, pp. 99–111, 2001. [46] K. Hoﬀ, A. Zaferakis, M. Lin, and D. Manocha, “Fast and simple 2d geometric proximity queries using graphics hardware,” Proc. of ACM Symposium on Interactive 3D Graphics, pp. 145–148, 2001. [47] K. Hoﬀ, A. Zaferakis, M. Lin, and D. Manocha, “Fast 3d geometric proximity queries between rigid and deformable models using graphics hardware acceleration,” Tech. Rep. TR02-004, Department of Computer Science, University of North Carolina, 2002. [48] M. H. Overmars, “Point location in fat subdivisions,” Inform. Proc. Lett., vol. 44, pp. 261–265, 1992. [49] S. Cameron, “Collision detection by four-dimensional intersection testing,” Proceedings of International Conference on Robotics and Automation, pp. 291–302, 1990. [50] D. Baraﬀ, Dynamic simulation of non-penetrating rigid body simulation. PhD thesis, Cornell University, 1992. [51] M. Shamos and D. Hoey, “Geometric intersection problems,” Proc. 17th An. IEEE Symp. Found. on Comput. Science, pp. 208–215, 1976. [52] J. Hopcroft, J. Schwartz, and M. Sharir, “Eﬃcient detection of intersections among spheres,” The International Journal of Robotics Research, vol. 2, no. 4, pp. 77–80, 1983. [53] H. Six and D. Wood, “Counting and reporting intersections of D-ranges,” IEEE Transactions on Computers, pp. 46–55, 1982. [54] F. Preparata and M. I. Shamos, Computational Geometry. New York: SpringerVerlag, 1985. [55] H. Edelsbrunner, “A new approach to rectangle intersections, Part I,” Internat. J. Comput. Math., vol. 13, pp. 209–219, 1983.

© 2005 by Chapman & Hall/CRC

57 Image Data Structures 57.1 57.2 57.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . What is Image Data? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quadtrees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . What is a Quadtree?

57.4

S. S. Iyengar Louisiana State University

V. K. Vaishnavi Georgia State University

S. Gunasekaran Louisiana State University

57.1

Variants of Quadtrees

Virtual Quadtrees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compact Quadtrees

57.5 57.6 57.7 57.8

•

57-1 57-2 57-3

•

Quadtrees and R-trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Octrees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Translation Invariant Data Structure (TID) . . . Content-Based Image Retrieval System . . . . . . . . . What is CBIR?

•

57-6

Forest of Quadtrees (FQT)

57-11 57-12 57-13 57-15

An Example of CBIR System

57.9 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-16 57.10 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-17

Introduction

Image has been an integral part of our communication. Visual information aids us in understanding our surroundings better. Image processing, the science of manipulating digital images, is one of the methods used for digitally interpreting images. Image processing generally comprises three main steps: 1. Image acquisition: Obtaining the image by scanning it or by capturing it through some sensors. 2. Image manipulation/analysis: Enhancing and/or compressing the image for its transfer or storage. 3. Display of the processed image. Image processing has been classiﬁed into two levels: low-level image processing and highlevel image processing. Low-level image processing needs little information about the content or the semantics of the image. It is mainly concerned with retrieving low-level descriptions of the image and processing them. Low-level data include matrix representation of the actual image. Image calibration and image enhancement are examples of low-level image processing. High-level image processing is basically concerned with segmenting an image into objects or regions. It makes decisions according to the information contained in the image. High-level data are represented in symbolic form. The data include features of the image such as object size, shape and its relation with other objects in the image. These image-processing techniques depend signiﬁcantly on the underlying image data structure.

57-1

© 2005 by Chapman & Hall/CRC

57-2

Handbook of Data Structures and Applications

FIGURE 57.1: Example of an image. Eﬃcient data structures for region representation are important for use in manipulating pictorial information. Many techniques have been developed for representing pictorial information in image processing [20]. These techniques include data structures such as quadtrees, linear quadtrees, Forest of Quadtrees, and Translation Invariant Data structure (TID). We will discuss these data structures in the following sections. Research on quadtrees has produced several interesting results in diﬀerent areas of image processing [2] [6] [7] [11] [12] [14]. In 1981, Jones and Iyengar [8] proposed methods of reﬁning quadtrees. A good tracing of the history of the evolution of quadtrees is provided by Klinger and Dyer [13]. See also Chapter 19 of this handbook.

57.2

What is Image Data?

An image is a visual reproduction of an object using an optical or electronic device. Image data include pictures taken by satellites, scanned images, aerial photographs and other digital photographs. In the computer, image is represented as a data ﬁle that consists of a rectangular array of picture elements called pixels. This rectangular array of pixels is also called a raster image. The pixels are the smallest programmable visual unit. The size of the pixel depends on the resolution of the monitor. The resolution can be deﬁned as the number of pixels present on the horizontal axis and vertical axis of a display monitor. When the resolution is set to maximum the pixel size is equal to a dot on the monitor. The pixel size increases with the decrease of the resolution. Figure 57.1 shows an example of an image. In a monochrome image each pixel has its own brightness value ranging from 0 (black) to 255 (white). For a color image each pixel has a brightness value and a RGB color value. RGB is an additive color state that has separate values for red, green, and blue. Hence each pixel has independent values (0 to 255) for red, green, and blue colors. If the values for red, green, and blue components of the pixel are the same then the resulting pixel color is gray. Diﬀerent shades of gray pixels constitute a gray-scale image. If pixels of an image have only two states, black or white, then the image is called a binary image. Image data can be classiﬁed into raster graphics and vector graphics. Raster graphics, also known as bitmap graphics, represents an image using x and y coordinates (for 2dimages) of display space; this grid of x and y coordinates is called the raster. Figure 57.2 shows how a circle will appear in raster graphics. In raster graphics an image is divided up

© 2005 by Chapman & Hall/CRC

Image Data Structures

57-3

FIGURE 57.2: A circle in raster graphics. in raster. All raster dots that are more than half full are displayed as black dots and the rest as white dots. This results in step like edges as shown in the ﬁgure. The appearance of jagged edges can be minimized by reducing the size of the raster dots. Reducing the size of the dots will increase the number of pixels needed but increases the size of the storage space. Vector graphics uses mathematical formulas to deﬁne the image in a two-dimensional or three-dimensional space. In a vector graphics ﬁle an image is represented as a sequence of vector statements instead of bits, as in bitmap ﬁles. Thus it needs just minimal amount of information to draw shapes and therefore the ﬁles are smaller in size compared to raster graphics ﬁles. Vector graphics does not consist of black and white pixels but is made of objects like line, circle, and rectangle. The other advantage of vector graphics is that it is ﬂexible, so it can be resized without loss of information. Vector graphics is typically used for simple shapes. CorelDraw images, PDF, and PostScript are all in vector image format. The main drawbacks of vector graphics is that it needs longer computational time and has very limited choice of shapes compared to raster graphics. Raster ﬁle, on the other hand, is usually larger than vector graphics ﬁle and is diﬃcult to modify without loss of information. Scaling a raster ﬁle will result in loss of quality whereas vector graphics can be scaled to the quality of the device on which it is rendered. Raster graphics is used for representing continuous numeric values unlike vector graphics, which is used for discrete features. Examples of raster graphic formats are GIF, JPEG, and PNG.

57.3

Quadtrees

Considerable research on quadtrees has produced several interesting results in diﬀerent areas of image processing. The basic relationship between a region and its quadtree representation is presented in [6]. In 1981, Jones and Iyengar [8] proposed methods for reﬁning quadtrees. The new reﬁnements were called virtual quadtrees, which include compact quadtrees and forests of quadtrees. We will discuss virtual quadtrees in a later section of this chapter. Much work has been done on the quadtree properties and algorithms for manipulations and translations have been developed by Samet [16], [19], Dyer [2] and others [6], [9], [11].

© 2005 by Chapman & Hall/CRC

57-4

57.3.1

Handbook of Data Structures and Applications

What is a Quadtree?

A quadtree is a class of hierarchical data structures used for image representation. The fundamental principle of quadtrees is based on successive regular decomposition of the image data until each part contains data that is suﬃciently simple so that it can be represented by some other simpler data structure. A quadtree is formed by dividing an image into four quadrants, each quadrant may further be divided into four sub quadrants and so on until the whole image has been broken down to small sections of uniform color. In a quadtree the root represents the whole image and the non-root nodes represent sub quadrants of the image. Each node of the quadtree represents a distinct section of the image; no two nodes can represent the same part of the image. In other words, the sub quadrants of the image do not overlap. The node without any child is called a leaf node and it represents a region with uniform color. Each non-leaf node in the tree has four children, each of which represents one of the four sub regions, referred to as NW, NE, SW, and SE, that the region represented by the parent node is divided into. The leaf node of a quadtree has the color of the pixel (black or white) it is representing. The nodes with uniform colored children have the color of their children and all their child nodes are removed from the tree. All the other nodes with non-uniform colored children have the gray color. Figure 57.3 shows the concept of quadtrees. The image can be retrieved from the quadtree by using a recursive procedure that visits each leaf node of the tree and displays its color at an appropriate position. The procedure starts with visiting the root node. In general, if the visited node is not a leaf then the procedure is recursively called for each child of the node, in order from left to right. The main advantage of the quadtree data structure is that images can be compactly represented by it. The data structure combines data having similar values and hence reduces storage size. An image having large areas of uniform color will have very small storage size. The quadtree can be used to compress bitmap images, by dividing the image until each section has the same color. It can also be used to quickly locate any object of interest. The drawback of the quadtree is that it can have totally diﬀerent representation for images that diﬀer only in rotation or translation. Though the quadtree has better storage eﬃciency compared to other data structures such as the array, it also has considerable storage overheads. For a given image it stores many white leaf nodes and intermediate gray nodes, which are not required information.

57.3.2

Variants of Quadtrees

The numerous quadtree variants that have been developed so far can be diﬀerentiated by the type of data they are designed to represent [15]. The many variants of the quadtree include region quadtrees, point quadtrees, line quadtrees, and edge quadtrees. Region quadtrees are meant for representing regions in images, while point quadtrees, edge quadtrees, and line quadtrees are used to represent point features, edge features, and line features, respectively. Thus there is no single quadtree data structure which is capable of representing a mixture of features of images like regions and lines. Region quadtrees

In the region quadtree, a region in a binary image is a subimage that contains either all 1’s or all 0’s. If the given region does not consist entirely of 1’s or 0’s, then the region is divided into four quadrants. This process is continued until each divided section consists entirely of 1’s or 0’s; such regions are called ﬁnal regions. The ﬁnal regions (either black or white) are represented by leaf nodes. The intermediate nodes are called gray nodes. A region quadtree

© 2005 by Chapman & Hall/CRC

Image Data Structures

57-5

FIGURE 57.3: The concept of quadtrees is space eﬃcient for images containing square-like regions. It is very ineﬃcient for regions that are elongated or for representing line features. Line quadtrees

The line quadtree proposed by Samet [21] is used for representing the boundaries of a region. The given region is represented as in the region quadtree with additional information associated with nodes representing the boundary of the region. The data structure is used for representing curves that are closed. The boundary following algorithm using the line quadtree data structure is at least twice as good as the one using the region quadtree in terms of execution time; the map superposition algorithm has execution time proportional to number of nodes in the line quadtree [15]. The main disadvantage of the line quadtree is that it cannot represent independent linear features.

© 2005 by Chapman & Hall/CRC

57-6

Handbook of Data Structures and Applications

Edge quadtrees

Shneier [23] formulated the edge quadtree data structure for storing linear features. The main principle used in the data structure is to approximate the curve being represented by a number of straight line segments. The edge quadtree is constructed using a recursive procedure. If the sub quadrant represented by a node does not contain any edge or line, it is not further subdivided and is represented by a leaf. If it does contain one then an approximate equation is ﬁtted to the line. The error caused by approximation is calculated using a measure such as least squares. When the error is less than the predetermined value, the node becomes a leaf; otherwise the region represented by the node is further subdivided. If an edge terminates (within the region represented by) a node then a special ﬂag is set. Each node contains magnitude, direction, intercept, and error information about the edge passing through the node. The main drawback of the edge quadtree is that it cannot eﬃciently handle two or more intersecting lines. Template quadtrees

An image can have regions and line features together. The above quadtree representational schemas are not eﬃcient for representing such an image in one quadtree data structure. The template quadtree is an attempt toward development of such a quadtree data structure. It was proposed by Manohar, Rao, and Iyengar [15] to represent regions and curvilinear data present in images. A template is a 2k x 2k sub image, which contains either a region of uniform color or straight run of black pixels in horizontal, vertical, left diagonal, or right diagonal directions spanning the entire sub image. All the possible templates for a 2x2 sub image are shown in Figure 57.4. A template quadtree can be constructed by comparing a quadrant with any one of the templates, if they match then the quadrant is represented by a node with the information about the type of template it matches. Otherwise the quadrant is further divided into four sub quadrants and each one of them is compared with any of the templates of the next lower size. This process is recursively followed until the entire image is broken down into maximal blocks corresponding to the templates. The template quadtree representation of an image is shown in Figure 57.5. Here the leaf is deﬁned as a template of variable size, therefore it does not need any approximation for representing curves present in the images. The advantage of template quadtree is that it is very accurate and has the capabilities for representing features like regions and curves. The main drawback is that it needs more space compared to edge quadtrees. For more information on template quadtrees see [15].

57.4

Virtual Quadtrees

The quadtree has become a major data structure in image processing. Though the quadtree has better storage eﬃciency compared to other data structures such as the array, it also has considerable storage overhead. Jones and Iyengar [10] have proposed two ways in which quadtrees may be eﬃciently stored: as “forest of quadtrees” and as “compact quadtrees”. They called these new data structures virtual quadtrees because the basic operations performed in quadtrees can also be performed on the new representations. The virtual quadtree is a space-eﬃcient way of representing a quadtree. It is a structure that simulates quadtrees in such a way that we can, 1. Determine the color of any node in the quadtree.

© 2005 by Chapman & Hall/CRC

Image Data Structures

57-7

FIGURE 57.4: Template sets. 2. Find the child node of any node, in any direction in the quadtree. 3. Find the parent node of any node in the quadtree. The two types of virtual quadtrees, which we are going to discuss, are the compact quadtree and the forest of quadtrees.

57.4.1

Compact Quadtrees

The compact quadtree has all the information contained in a quadtree but needs less space. It is represented as C(T), where T is the quadtree it is associated with. Each set of four sibling nodes in the quadtree is represented as a single node called metanode in the corresponding compact quadtree. The metanode M has four ﬁelds, which are explained as follows: • MCOLOR(M, D) – The colors of the nodes included in M. Where D ∈ {NW,NE,SW,SE}. • MSONS(M) – Points to the ﬁrst metanode that represents oﬀsprings of a node represented in M; NIL if no oﬀspring exists. • MFATHER(M) – Points to the metanode that holds the representation of the parent of the nodes that M represents. • MCHAIN(M) – If there are more than one metanode that represent oﬀspring of nodes represented by a given metanode M, then these are linked by MCHAIN ﬁeld. The compact quadtree for the quadtree shown in the Figure 57.6 is given in Figure 57.7.

© 2005 by Chapman & Hall/CRC

57-8

Handbook of Data Structures and Applications

FIGURE 57.5: Template quadtree representation. In Figure 57.7 downward links are MSON links, horizontal links are MCHAIN links and upward links are MFATHER links. The compact quadtree uses the same amount of space for the storage of color but it uses very less space for storage of pointers. In Figure 57.7, the compact quadtree has 10 metanodes, whereas the quadtree has 41 nodes. Thus it saves about 85 percent of the storage space. Since the number of nodes in a compact quadtree is less a simple recursive tree traversal can be done more eﬃciently.

57.4.2

Forest of Quadtrees (FQT)

Jones and Iyengar [8] proposed a variant of quadtrees called forest of quadtrees to improve the space eﬃciency of quadtrees. A forest of quadtrees is represented by F(T) where T is the quadtree it represents. A forest of quadtrees, F(T) that represents T consists of a table of triples of the form (L, K, P), and a collection of quadtrees where, 1. Each triple (L, K, P) consists of the coordinates, (L, K), of a node in T, and a pointer, P, to a quadtree that is identical to the subtree rooted at position (L, K) in T. 2. If (L, K) and (M, N) are coordinates of nodes recorded in F(T), then neither node is a descendant of the other. 3. Every black leaf in T is represented by a black leaf in F(T).

© 2005 by Chapman & Hall/CRC

Image Data Structures

57-9

FIGURE 57.6: Quadtree with coordinates.

FIGURE 57.7: Compact quadtree C(T). To obtain the corresponding forest of quadtrees, the nodes in a quadtree need to be classiﬁed as good and bad nodes. A leaf node with black color or an intermediate node that has two or more black child nodes are called good nodes, the rest are called bad nodes. Only the good nodes are stored in the forest of quadtrees thereby saving lot of storage space.

© 2005 by Chapman & Hall/CRC

57-10

Handbook of Data Structures and Applications Table in the FQT

Trees in the FQT

FIGURE 57.8: Forest of quadtrees F(T).

Figure 57.8 contains a forest of quadtrees that represents the quadtree shown in Figure 57.6. To reduce a quadtree to a forest of quadtrees, we ﬁrst need to identify the good nodes and the bad nodes. We then break down the quadtree into smaller quadtrees in such a way that each of them has a good root node and none of them is a subtree of another and the bad nodes encountered by forest are freed. This collection of quadtrees is called as forest of quadtrees. The time required for the execution of the conversion is obviously linear in the number of nodes in the quadtree [10]. Theorem: The maximum number of trees in a forest of quadtrees derived from a quadtree that represents a square of dimension 2k x 2k is 4k−1 , i.e., one-fourth the area of the square. For proof see [10]. The corresponding quadtree can be easily reconstructed from a forest of quadtrees F. The reconstructed quadtree R(F) consists of real nodes and virtual nodes (nodes corresponding to the bad nodes that are deleted while creating the forest). Since the virtual nodes require no storage they are located by giving their coordinates. The virtual nodes are represented as v(L, K).

© 2005 by Chapman & Hall/CRC

Image Data Structures

57-11

FIGURE 57.9: The concept of R-tree.

57.5

Quadtrees and R-trees

Quadtrees and R-trees [3] are two commonly used spatial data structures to locate or organize objects in a given image. Both quadtrees and R-trees use bounding boxes to depict the outline of the objects. Therefore, the data structure only needs to keep track of the boundaries instead of the actual shape and size of the objects in the image. The size of the bounding boxes usually depends on the size of the object we are trying to locate. The R-tree (see also Chapter 21) is a hierarchical, height balanced data structure, similar to the B+ -tree that aggregates objects based on their spatial proximity. It is a multidimensional generalization of the B+ -tree. The R-tree indexes multidimensional data objects by enclosing data objects in bounding rectangles, which may further be enclosed in bounding rectangles; these bounding rectangles can overlap each other. Each node except the leaf node has a pointer and the corresponding bounding rectangle. The pointer points to the subtree with all the objects enclosed in its corresponding rectangle. The leaf node has a bounding rectangle and the pointer pointing to the actual data object. The root node has a minimum of two children unless it is a leaf node and all the leaf nodes appear at the same level. Figure 57.9 Shows the R-tree representation of an image. The main diﬀerence between quadtrees and R-trees is that unlike R-trees the bounding rectangle of quadtrees do not overlap. In real world objects overlap; in such cases more than

© 2005 by Chapman & Hall/CRC

57-12

Handbook of Data Structures and Applications

FIGURE 57.10: Quadtree representation of the image in Figure 57.9. one node in a quadtree can point to the same object. This is a serious disadvantage for the quadtree. Figure 57.10 shows the quadtree representation of the image in Figure 57.9. As you can see from the Figure 57.10 objects like ‘C’ and ‘D’ are represented by more than one node. This makes it diﬃcult to ﬁnd the origin of the quadtree. The R-tree is a dynamic structure, so its contents can be modiﬁed without having to reconstruct the entire tree. It can be used to determine which objects intersect a given query region. The R-tree representation of an image is not unique; size and placement of rectangles in the tree depends on the sequence of insertions and deletions resulting in the tree starting from the empty R-tree.

57.6

Octrees

Octrees are 3D equivalent of quadtrees and are used for representing 3D images. An octree is formed by dividing a 3D space into 8 sub-cubes called cells. This process of dividing the cube into cells is carried on until the (image) objects lie entirely inside or outside the cells. The root node of an octree represents a cube, which encompasses the objects of interest. In the octree each node except the leaf node has eight child nodes, which represent the sub-cubes of the parent node. The node stores information like pointer to the child nodes, pointer to the parent node, and pointers to the contents of the cube. An example of an

© 2005 by Chapman & Hall/CRC

Image Data Structures

57-13

FIGURE 57.11: Octree representation. octree representation is shown in Figure 57.11. The Octree become very ineﬀective if the objects in the image that it is representing are not uniformly distributed, as in that case many nodes in the octree will not contain any objects. Such an octree is also very costly to compute as a large amount of data has to be examined.

57.7

Translation Invariant Data Structure (TID)

Methods for the region representation using quadtrees exist in the literature [2], [16], [17]. Much work has been done on quadtree properties, and algorithms for translations and manipulations have been derived by Dyer [2], Samet [18], [19], Shneier [24] and others. Various improvements to quadtrees have been suggested including forests of quadtrees, hybrid quadtrees, linear quadtrees, and optimal quadtrees for image segments. All of these methods try to optimize quadtrees by removing some are all of the gray and white nodes. All of them maintain the same number of black nodes. All these methods are sensitive to the placement of the origin. An image, which has been

© 2005 by Chapman & Hall/CRC

57-14

Handbook of Data Structures and Applications

FIGURE 57.12: Sample Regions.

FIGURE 57.13: Quadtrees for Example 1 and 2 of Figure 57.12. translated from its original position, can have a very diﬀerent looking structure [22]. We explain this phenomenon by using the example given in Figure 57.12. In Example 1, the black square is in the upper left corner. In Example 2, it is translated down and right by one pixel. Figure 57.13 gives the quadtree representation for these two examples.

© 2005 by Chapman & Hall/CRC

Image Data Structures

57-15

The shift sensitivity of the image data structure derives from the fact that the positions of the maximal blocks represented by leaf nodes are not explicitly represented in the data structure. Instead, these positions are determined by the paths leading to them from the root of the tree. Thus, when the image is shifted, the maximal blocks are formed in a diﬀerent way. For this reason Scott and Iyengar [22] have introduced a new data structure called Translation Invariant Data structure (TID), which is not sensitive to the placement of the region and is translation invariant. A maximal square is a black square of pixels that is not included in any large square of black pixels. TID is made of such maximal squares, which are represented as (i, j, s) where (i, j) is the coordinates of the northwest vertex of the square and ‘s’ is the length of the square. Translation made to any image can be represented as a function of these triples. For example consider a triple (i, j, s), translating it x units to the right and y units up yields (i+x, j+y, s) [22]. The rotation of the square by π/2 is only slightly more complicated due to the fact that the NW corner of the square changes upon rotation. The π/2 rotation around the origin gives (-j, i +s, s).

57.8

Content-Based Image Retrieval System

Images have always been a part of human communication. Due to the increase in the use of Internet the interest in the potential of digital images has increased greatly. Therefore we need to store and retrieve images in an eﬃcient way. Locating and retrieving a desired image from a large database can be a very tedious process and is still an active area of research. This problem can be reduced greatly by using Content-Based Image Retrieval (CBIR) systems, which retrieves images based only on the content of the image. This technique retrieves images on the basis of automatically-derived features such as color, texture, and shape.

57.8.1

What is CBIR?

Content-Based Image Retrieval is a process of retrieving desired images from a large database based on the internal features that can be obtained automatically from the images themselves. CBIR techniques are used to index and retrieve images from databases based on their pictorial content, typically deﬁned by a set of features extracted from an image that describe the color, texture, and/or shape of the entire image or of speciﬁc objects in the image. This feature description is used to index a database through various means such as distance-based techniques, rule-based decision-making, and fuzzy inferencing [4], [5], [25]. Images can be matched in two ways. Firstly, an image can be compared with another image to check for similarity. Secondly, images similar to the given image can be retrieved by searching a large image database. The latter process is called content-based image retrieval. General structure of CBIR systems

The general computational framework of a CBIR system as shown in Figure 57.14 was proposed in [26]. At ﬁrst, the image database is created, which stores the images as numerical values supplied by the feature extraction algorithms. These values are used to locate an image similar to the query image. The query image is processed by the same feature extraction algorithm that is applied to the images stored in the database.

© 2005 by Chapman & Hall/CRC

57-16

Handbook of Data Structures and Applications

FIGURE 57.14: Computational framework of CBIR systems. The similarity between the query image and the images stored in the database can be veriﬁed with the help of the similarity measure algorithm, which compares the results obtained from the feature extraction algorithms for both the query image and the images in the database. Thus after comparing the query image with all the images in the database the similarity measure algorithm gives a set as the result, which has all the images from the database that are similar to the query image.

57.8.2

An Example of CBIR System

An example of Content-Based Image Retrieval System is BlobWorld. The BlobWorld system, developed at the University of California, Berkeley, supports color, shape, spatial, and texture matching features. Blobworld is based on ﬁnding coherent image regions that roughly correspond to objects. The system automatically separates each image into homogeneous regions in order to improve content-based image retrieval. Querying is based on the user specifying attributes of one or two regions of interest, rather than a description of the entire image. For more information on Blobworld see [1]. CBIR techniques are likely to be of most use in restricted subject areas, where merging with other types of data like text and sound can be achieved. Content-based image retrieval provides an eﬃcient solution to the restrictions and the problems caused by the traditional information retrieval technique. The number of active research systems is increasing, which reﬂects the increasing interest in the ﬁeld of content-based image retrieval.

57.9

Summary

In this chapter we have explained what an image data is and how it is stored in raster graphics and vector graphics. We then discussed some of the image representation techniques like quadtrees, virtual quadtrees, octrees, R-trees and translation invariant data structures. Fi-

© 2005 by Chapman & Hall/CRC

Image Data Structures

57-17

nally, we have given a brief introduction to Content-Based Image Retrieval (CBIR) systems. For more information on image retrieval concepts see [4], [5], [25], [26].

57.10

Acknowledgments

The authors acknowledge the contributions of Sridhar Karra and all the previous collaborators in preparing this chapter.

References [1] C. Carson, M. Thomas, S. Belongie, J. M. Hellerstein, and J. Malik, Blobworld: A System for Region-based Image Indexing and Retrieval., Proc. Int’l Conf. Visual Information System, pp. 509-516, 1999. [2] C. R. Dyer, A. Rosenfeld and H. Samet, Region representation: Boundary codes from Quadtrees, Comm. ACM 23, 3 (March 1980), 171-179. [3] A. Guttman, R-Trees: A Dynamic Index Structure for Spatial Searching., Proc. SIGMOD Conf., June 1984, 47-57. [4] C. Hsu, W. W. Chu, and R. K. Taira, A Knowledge-Based Approach for Retrieving Images by Content., IEEE Trans. on Knowledge and Data Engineering, Vol. 8, No. 4, August 1996. [5] P. W. Huang and Y. R. Jean, Design of Large Intelligent Image Database Systems., International Journal of Intelligent Systems, Vol. 11, 1996, p. 347. [6] G. M. Hunter and K. Steiglitz, Operations On Images Using Quadtrees, IEEE Trans. on Pattern Analysis and Machine Intell. 1, 2 (April 1979), 145-153. [7] G. M. Hunter and K. Steiglitz Linear Transformation Of Pictures Represented By Quadtrees, Computer, Graphics and Image Processing 10, 3(July 1979), 289-296. [8] L. Jones and S. S. Iyengar, Representation Of A Region As A Forest Of Quadtrees., Proc. IEEE-PRIP 81 Conference, Dallas, TX, IEEE Publications, (1981), 57-59. [9] L. Jones and S. S. Iyengar, Virtual Quadtrees., Proc. IEEE-CVIP 83 Conference, Virginia, IEEE publications (1983), 101-105. [10] L. P. Jones and S. S. Iyengar, Space And Time Eﬃcient Virtual Quadtrees., IEEE Transactions on Pattern Analysis and Machine Intell. 6, 2 (March 1984), 244-247. [11] E. Kawaguchi and T. Endo, On a Method of Binary-picture Representation and its Application to Data Compression, IEEE Trans. on Pattern Analysis and Machine Intell. 2, 1 (Jan.1980), 27-35. [12] A. Klinger, Patterns and Search Statistics, Optimizing Methods in Statistics, J.D. Rustagi, (Ed.), Academic Press, New York (1971). [13] A. Klinger and C. R. Dyer, Experiments in Picture Representation Using Regular Decomposition., Computer Graphics and Image Processing, Vol. 5, No. 1 (March 1976), 68-105. [14] A. Klinger and M. L. Rhodes, Organization and Access of Image Data by Areas., IEEE Trans. on Pattern Analysis and Machine Intell. 1, 11 (Jan. 1979), 50-60. [15] M. Manohar, P. Sudarsana Rao, S. Sitarama Iyengar, Template Quadtrees for Representing Region and Line Data Present in Binary Images., NASA Goddard Flight Center, Greenbelt, MD, 1988. [16] H. Samet, Region Representation: Quadtree from Boundary Codes., Comm. ACM 23, 3 (March 1980), 163-170. [17] H. Samet, Region Representation: Quadtree from Binary Arrays., Comput. Graphics Image Process. 18, 1 1980, 88-93.

© 2005 by Chapman & Hall/CRC

57-18

Handbook of Data Structures and Applications

[18] H. Samet, An Algorithm for Converting Rasters to Quadtrees., IEEE Trans. on Pattern Analysis and Machine Intell. 3, 1 (Jan. 1981), 93-95. [19] H. Samet, Connected Component Labeling using Quadtrees., JACM 28, 3 (July 1981), 487-501. [20] H. Samet, The Design and Analysis of Spatial Data Structures, Addison-Wesley Pub. Co., 1990. [21] H. Samet and R. E. Webber, On Encoding Boundaries with Quadtrees., IEEE Trans. on Pattern Analysis and Machine Intell. 6, 1984. 365-369. [22] D. S. Scott and S. S. Iyengar, TID- A Translation Invariant Data Structure For Storing Images., Comm. ACM 29, 5 (May 1985), 418-429. [23] M. Shneier, Two Hierarchical Linear Feature Representations: Edge Pyramids and Edge Quadtrees., Comput. Graphics Image Process. 17, 1981, 211-224. [24] M. Shneier, Path Length Distances for Quadtrees., Inform.Sci. 23,1 (1981), 49-67. [25] B. Tao and B. Dickinson, Image Retrieval and Pattern Recognition., The International Society for Optical Engineering, Vol. 2916, 1996, p. 130. [26] J. Zachary, S. S. Iyengar and J. Barhen, Content Based Image Retrieval and Information Theory: A General Approach., JASIS 2000.

© 2005 by Chapman & Hall/CRC

58 Computational Biology Stefan Kurtz University of Hamburg

Stefano Lonardi University of California, Riverside

58.1

58.1 58.2 58.3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discovering Unusual Words . . . . . . . . . . . . . . . . . . . . . . . Comparing Whole Genomes . . . . . . . . . . . . . . . . . . . . . .

58-1 58-1 58-9

Introduction

In the last ﬁfteen years, biological sequence data have been accumulating at exponential rate under continuous improvement of sequencing technology, progress in computer science, and steady increase of funding. Molecular sequence databases (e.g., EMBL, Genbank, DDJB, Entrez, Swissprot, etc.) currently collect hundreds of thousand of sequences of nucleotides and amino acids from biological laboratories all over the world, reaching into the hundreds of gigabytes. Such an exponential growth makes it increasingly important to have fast and automatic methods to process, analyze, and visualize massive amounts of data. The exploration of many computational problems arising in contemporary molecular biology has now grown to become a new ﬁeld of Computer Science. A coarse selection would include sequence homology and alignment, physical and genetic mapping, protein folding and structure prediction, gene expression analysis, evolutionary trees construction, gene ﬁnding, assembly for shotgun sequencing, gene rearrangements and pattern discovery, among others. In this chapter we focus the attention on the applications of suﬃx trees to computational biology. In fact, suﬃx trees and their variants are among the most used (and useful) data structures in computational biology. Among their applications, we mention pattern discovery [4, 31, 36, 37], alignment of whole genomes [17, 18, 24], detection of exact tandem repeats [46], detection of approximate repeats [27], fragment assembly [15], oligo and probe design [41, 42], etc. Here we describe two applications. In the ﬁrst, the use of suﬃx trees and DAWGs is essential in developing a linear-time algorithm for solving a pattern discovery problem. In the second, suﬃx trees are used to solve a challenging algorithmic problem: the alignment of two or more complete genomes. (See Chapters 29 and 30 for more on suﬃx trees and DAWGs.)

58.2

Discovering Unusual Words

In the context of computational biology, “pattern discovery” refers to the automatic identiﬁcation of biologically signiﬁcant patterns (or motifs) by statistical methods. These methods

58-1

© 2005 by Chapman & Hall/CRC

58-2

Handbook of Data Structures and Applications

originated from the work of R. Staden [45] and have been recently expanded in a subﬁeld of data-mining. The underlying assumption is that biologically signiﬁcant words show distinctive distributional patterns within the genomes of various organisms, and therefore they can be distinguished from the others. The reality is not too far from this hypothesis (see, for example, [11, 12, 19, 25, 35, 39, 40, 51, 52]), because during the evolutionary process, living organisms have accumulated certain biases toward or against some speciﬁc motifs in their genomes. For instance, highly recurring oligonucleotides are often found in correspondence to regulatory regions or protein binding sites of genes (see, e.g., [10, 21, 49, 50]). Vice versa, rare oligonucleotide motifs may be discriminated against due to structural constraints of genomes or speciﬁc reservations for global transcription controls (see, e.g., [20, 51]). From a statistical viewpoint, over- and under-represented words have been studied quite rigorously (see, e.g., [44] for a review). A substantial corpus of works has been also produced by the scientiﬁc community which studies combinatorics on words (see, e.g., [29, 30] and references therein). In the application domain, however, the “success story” of pattern discovery has been its ability to ﬁnd previously unknown regulatory elements in DNA sequences (see, e.g., [48, 49]). Regulatory elements control the expression (i.e., the amount of mRNA produced) of the genes over time, as the result of diﬀerent external stimuli to the cell and other metabolic processes that take place internally in the cell. These regulatory elements are typically, but not always, found in the upstream sequence of a gene. The upstream sequence is deﬁned as a portion of DNA of 1-2Kbases of length, located upstream of the site that controls the start of transcription. The regulatory elements correspond to binding sites for the factors involved in the transcriptional process. The complete characterization of these elements is a critical step in understanding the function of diﬀerent genes, and the complex network of interaction between them. The use of pattern discovery to ﬁnd regulatory elements relies on a conceptual hypothesis that genes which exhibit similar expression patterns are assumed to be involved in the same biological process or functions. Although many believe that this assumption is an oversimpliﬁcation, it is still a good working hypothesis. Co-expressed genes are therefore expected to share common regulatory domains in the upstream regions for the coordinated control of gene expression. In order to elucidate genes which are co-expressed as a result of a speciﬁc stress or condition, a DNA microarray experiment is typically designed. After collecting data from the microarray, co-expressed genes are usually obtained by clustering the time series corresponding to their expression proﬁles. As said, words that occur unexpectedly often or rarely in genetic sequences have been variously linked to biological meanings and functions. With increasing availability of whole genomes, exhaustive statistical tables and global detectors of unusual words on a scale of millions, even billions of bases become conceivable. It is natural to ask how large such tables may grow with increasing length of the input sequence, and how fast they can be computed. These problems need to be regarded not only from the conventional perspective of asymptotic space and time complexities, but also in terms of the volumes of data produced and ultimately, of practical accessibility and usefulness. Tables that are too large at the outset saturate the perceptual bandwidth of the user, and might suggest approaches that sacriﬁce some modeling accuracy in exchange for an increased throughput. The number of distinct substrings in a string is at worst quadratic in the length of that string. The situation does not improve if one restricts himself to computing and displaying the most unusual words in a given sequence. This presupposes comparing the frequency of occurrence of every word in that sequence with its expectation: a word that departs from expectation beyond some pre-set threshold will be labeled as unusual or surprising. Departure from expectation is assessed by a distance measure often called a score function. The typical format for a z-score is that of a diﬀerence between observed and expected

© 2005 by Chapman & Hall/CRC

Computational Biology

58-3

counts, usually normalized to some suitable moment. For most a priori models of a source, it is not diﬃcult to come up with extremal examples of observed sequences in which the number of, say, over-represented substrings grows itself with the square of the sequence length. An extensive study of probabilistic models and scores for which the population of potentially unusual words in a sequence can be described by tables of size at worst linear in the length of that sequence was carried out in [4]. That study not only leads to more palatable representations for those tables, but also supports (non-trivial) linear time and space algorithms for their constructions, as described in what follows. These results do not mean that the number of unusual words must be linear in the input, but just that their representation and detection can be made such. Speciﬁcally, it is seen that it suﬃces to consider as candidate surprising words only the members of an a priori well identiﬁed set of “representative” words, where the cardinality of that set is linear in the text length. By the representatives being identiﬁable a priori we mean that they can be known before any score is computed. By neglecting the words other than the representatives we are not ruling out that those words might be surprising. Rather, we maintain that any such word: (i) is embedded in one of the representatives, and (ii) does not have a bigger score or degree of surprise than its representative (hence, it would add no information to compute and give its score explicitly).

Statistical analysis of words For simplicity of exposition, assume that the source can be modeled by a Bernoulli distribution, i.e., symbols are generated i.i.d., and that strings are ranked based on their number of occurrences (possibly overlapping). The results reported in the rest of this section can be extended to other models and counts (see [4]). We use standard concepts and notation about strings, for which we refer to [5, 6]. For a substring y of a text x over an alphabet Σ, we denote by fx (y) the number of occurrences of y in x. We have fx (y) = |posx (y)| = |endposx (y)|, where posx (y), is the start-set of starting positions of y in x and endposx (y) is the similarly deﬁned end-set. Clearly, for any extension uyv of y, fx (uyv) ≤ fx (y). Suppose now that string x = x[0]x[1] . . . x[n − 1] is a realization of a stationary ergodic random process and y[0]y[1] . . . y[m − 1] = y is an arbitrary but ﬁxed pattern over Σ with m < n. We deﬁne Zi , for all i ∈ [0 . . . n − m], to be 1 if y occurs in x starting at position i, 0 otherwise, so that Zy =

n−m

Zi

i=0

is the random variable for fx (y). Expressions for the expectation and the variance for the number of occurrences in the Bernoulli model, have been given by several authors (see, e.g., [22, 26, 38, 43, 47]). Here we m−1 adopt derivations in [5, 6]. With pa the probability of symbol a ∈ Σ and pˆ = i=0 py[i] , we have E(Zy ) = (n − m + 1)ˆ p pB(y) if m ≤ (n + 1)/2 (1 − pˆ)E(Zy ) − pˆ2 (2n − 3m + 2)(m − 1) + 2ˆ Var(Zy ) = (1 − pˆ)E(Zy ) − pˆ2 (n − m + 1)(n − m) + 2ˆ pB(y) otherwise

© 2005 by Chapman & Hall/CRC

58-4

Handbook of Data Structures and Applications

where B(y) =

m−1

(n − m + 1 − d)

d∈P(y)

py[j]

(58.1)

j=m−d

is the auto-correlation factor of y, that depends on the set P(y) of the lengths of the periods∗ of y. Given fx (y), E(Zy ) and Var(Zy ), a statistical signiﬁcance score that measures the degree of “unusual-ness” of a substring y must be carefully chosen. Ideally, the score function should be independent of the structure and size of the word. That would allow one to make meaningful comparisons among substrings of various compositions and lengths based on the value of the score. There is some general consensus that z-scores may be preferred over other types of score function [28]. For any word w, a standardized frequency called z-score, can be deﬁned by z(y) =

fx (y) − E(Zy ) Var(Zy )

If E(Zy ) and Var(Zy ) are known, then under rather general conditions, the statistics z(y) is asymptotically normally distributed with zero mean and unit variance as n tends to inﬁnity. In practice E(Zy ) and Var(Zy ) are seldom known, but are estimated from the sequence under study.

Detecting unusual words Consider now the problem of computing exhaustive tables reporting scores for all substrings of a sequence, or perhaps at least for the most surprising among them. While the complexity of the problem ultimately depends on the probabilistic model and type of count, a table for all words of any size would require at least quadratic space in the size of the input, not to mention that such a table would take at least quadratic time to be ﬁlled. As seen towards the end of the section, such a limitation can be overcome by partitioning the set of all words into equivalence classes with the property, that it suﬃces to account for only one or two candidate surprising words in each class, while the number of classes is linear in the textstring size. More formally, given a score function z, a set of words C, and a real positive threshold T , we say that a word w ∈ C is T-over-represented in C (resp., T-under-represented ) if z(w) > T (resp., z(w) < −T ) and for all words y ∈ C we have z(w) ≥ z(y) (resp., z(w) ≤ z(y)). We say that a word w is T-surprising if z(w) > T or z(w) < −T . We also call max(C) and min(C) respectively the longest and the shortest word in C, when max(C) and min(C) are unique. Let now x be a textstring and {C1 , C2 , . . . , Cl } a partition of all its substrings, where max(Ci ) and min(Ci ) are uniquely determined for all 1 ≤ i ≤ l. For a given score z and a real positive constant T , we call OzT the set of T -over-represented words of Ci , 1 ≤ i ≤ l, with respect to that score function. Similarly, we call UzT the set of T -under-represented words of Ci , and SzT the set of all T -surprising words, 1 ≤ i ≤ l. For strings u and v = suz, a (u, v)-path is a sequence of words {w0 = u, w1 , w2 , . . . , wj = v}, l ≥ 0, such that wi is a unit-symbol extension of wi−1 (1 ≤ i ≤ j). In general a (u, v)-

∗ String

z has a period w if z is a non-empty preﬁx of w k for some integer k ≥ 1.

© 2005 by Chapman & Hall/CRC

Computational Biology

58-5

path is not unique. If all w ∈ C belong to some (min(Ci ), max(Ci ))-path, we say that class C is closed. A score function z is (u, v)-increasing (resp., non-decreasing) if given any two words w1 , w2 belonging to a (u, v)-path, the condition |w1 | < |w2 | implies z(w1 ) < z(w2 ) (resp., z(w1 ) ≤ z(w2 )). The deﬁnitions of a (u, v)-decreasing and (u, v)-non-increasing z-scores are symmetric. We also say that a score z is (u, v)-monotone when speciﬁcs are unneeded or understood. The following fact and its symmetric are immediate. If the z-score under the chosen model is (min(Ci ), max(Ci ))-increasing, and Ci is closed, 1 ≤ i ≤ l, then

FACT 58.1

OzT ⊆

l i=1

{max(Ci )}

and

UzT ⊆

l

{min(Ci )}

i=1

In [4], extensive results on the monotonicity of several scores for diﬀerent probabilistic models and counts are reported. For the purpose of this chapter, we just need the following result. THEOREM 58.1 (Apostolico et al. [4]) Let x be a text generated by a Bernoulli process, and pmax be the probability of the most frequent √ √symbol. If fx (w) = fx (wv) and pmax < min{1/ m 4m, 2 − 1} then

fx (w) − E(Zw ) fx (wv) − E(Zwv ) > Var(Zwv ) Var(Zw ) Here, we pursue substring partitions {C1 , C2 , . . . , Cl } in forms which would enable us to restrict the computation of the scores to a constant number of candidates in each class Ci . Speciﬁcally, we require, (1) for all 1 ≤ i ≤ l, max(Ci ) and min(Ci ) to be unique; (2) Ci to be closed, i.e., all w in Ci belong to some (min(Ci ), max(Ci ))-path; (3) all w in Ci have the same count. Of course, the partition of all substrings of x into singleton classes fulﬁlls those properties. In practice, l should be as small as possible. We begin by recalling a few basic facts and constructs from, e.g., [9]. We say that two strings y and w are left-equivalent on x if the set of starting positions of y in x matches the set of starting positions of w in x. We denote this equivalence relation by ≡l . It follows from the deﬁnition that if y ≡l w, then either y is a preﬁx of w, or vice versa. Therefore, each class has unique shortest and longest word. Also by deﬁnition, if y ≡l w then fx (y) = fx (w).

Example 58.1

For instance, in the string ataatataataatataatatag the set {ataa, ataat, ataata} is a left-equivalent class (with position set {1, 6, 9, 14}) and so are {taa, taat, taata} and {aa, aat, aata}. We have 39 left-equivalent classes, much less than the total number of substrings, which is 22 × 23/2 = 253, and than the number of distinct substrings, in this case 61. We similarly say that y and w are right-equivalent on x if the set of ending positions of y in x matches the set of ending positions of w in x. We denote this by ≡r . Finally, the

© 2005 by Chapman & Hall/CRC

58-6

Handbook of Data Structures and Applications

equivalence relation ≡x is deﬁned in terms of the implication of a substring of x [9, 16]. Given a substring w of x, the implication impx (w) of w in x is the longest string uwv such that every occurrence of w in x is preceded by u and followed by v. We write y ≡x w iﬀ impx (y) = impx (w). It is not diﬃcult to see that LEMMA 58.1

The equivalence relation ≡x is the transitive closure of ≡l ∪ ≡r .

More importantly, the size l of the partition is linear in |x| = n for all three equivalence relations considered. In particular, the smallest size is attained by ≡x , for which the number of equivalence classes is at most n + 1. Each one of the equivalence classes discussed can be mapped to the nodes of a corresponding automaton or word graph, which becomes thereby the natural support for the statistical tables. The table takes linear space, since the number of classes is linear in |x|. The automata themselves are built by classical algorithms, for which we refer to, e.g., [5, 9] with their quoted literature, or easy adaptations thereof. The graph for ≡l , for instance, is the compact subword tree Tx of x, whereas the graph for ≡r is the DAWG, or Directed Acyclic Word Graph Dx , for x. The graph for ≡x is the compact version of the DAWG. These data structures are known to commute in simple ways, so that, say, an ≡x -class can be found on Tx as the union of some left-equivalent classes or, alternatively, as the union of some right-equivalent classes. Beginning with left-equivalent classes, that correspond one-to-one to the nodes of Tx , we can build some right-equivalent classes as follows. We use the elementary fact that whenever there is a branching node µ in Tx , corresponding to w = ay, a ∈ Σ, then there is also a node ν corresponding to y, and there is a special suﬃx link directed from ν to µ. Such auxiliary links induce another tree on the nodes of Tx , that we may call Sx . It is now easy to ﬁnd a right-equivalent class with the help of suﬃx links. For this, traverse Sx bottom-up while grouping in a single class all strings such that their terminal nodes in Tx are roots of isomorphic subtrees of Tx . When a subtree that violates the isomorphism condition is encountered, we are at the end of one class and we start with a new one. Example 58.2

For example, the three subtrees rooted at the solid nodes in Figure 58.1 correspond to the end-sets of ataata, taata and aata, which are the same, namely, {6, 11, 14, 19}. These three words deﬁne the right-equivalent class {ataata, taata, aata}. In fact, this class cannot be made larger because the two subtrees rooted at the end nodes of ata and tataata are not isomorphic to the subtree of the class. We leave it as an exercise for the reader to ﬁnd all the right-equivalence classes on Tx . It turns out that there are 24 such classes in this example. Subtree isomorphism can be checked by a classical linear-time algorithm by Aho et al. [3]. But on the suﬃx tree Tx this is done even more quickly once the f counts are available (see, e.g., [8, 23]). LEMMA 58.2 Let T1 and T2 be two subtrees of Tx . T1 and T2 are isomorphic if and only if they have the same number of leaves and their roots are connected by a chain of suﬃx links.

If, during the bottom-up traversal of Sx , we collect in the same class strings such that

© 2005 by Chapman & Hall/CRC

Computational Biology

58-7 ta

a

ata

ta

ata..g

ata

1

ata..g

g 21

ata

ta

tag

g 14

6

9

ata..g 4

g

g

ta

ata

tag 17

19

ata

12

ata..g 3

ata..g

g

8

ta

ta

ata

ata

tag 16

11

ata..g 2

ata..g

g

7

ata

ta

tag 15

10

ata..g 5

g

g 22

g 20

tag 18

13

FIGURE 58.1: The tree Tx for x= ataatataataatataatatag: subtrees rooted at the solid nodes are isomorphic. their terminal arc leads to nodes with the same frequency counts f , then this would identify and produce the ≡x -classes, i.e., the smallest substring partition. Example 58.3

For instance, starting from the right-equivalent class C = {ataata, taata, aata}, one can augment it with of all words which are left-equivalent to the elements of C. The result is one ≡x -class composed by {ataa, ataat, ataata, taa, taat, taata, aa, aat, aata}. Their respective pos sets are {1,6, 9,14}, {1,6, 9,14}, {1,6, 9,14}, {2,7, 10,15}, {2,7, 10,15}, {2,7, 10,15}, {3,8, 11,16}, {3,8, 11,16}, {3,8, 11,16}. Their respective endpos sets are {4,9, 12,17}, {5,10, 13,18}, {6,11, 14,19}, {4,9, 12,17}, {5,10, 13,18}, {6,11, 14,19}, {4,9, 12,17}, {5,10, 13,18}, {6,11, 14,19}. Because of Lemma 58.1, given two words y and w in the class, either they share the start set, or they share the end set, or they share the start set by transitivity with a third word in the class, or they share the end set by transitivity with a third word in the class. It turns out that there are only seven ≡x -classes in this example. Note that the longest string in this ≡x -class is unique (ataata) and that it contains all the others as substrings. The shortest string is unique as well (aa). As said, the number of occurrences for all the words in the same class is the same (4 in the example). Figure 58.2 illustrates the seven equivalence classes for the running example. The words in each class have been organized in a lattice, where edges correspond to extensions (or contractions) of a single symbol. In particular, horizontal edges correspond to right extensions and vertical edges to left extensions. While the longest word in an ≡x -class is unique, there may be in general more than one shortest word. Consider, for example, the text x = ak gk , with k > 0. Choosing k = 2 yields a class which has three words of length two as minimal elements, namely, aa, gg, and ag. (In fact, impx (aa) = impx (gg) = impx (ag) = aagg.) Taking instead k = 1, all three

© 2005 by Chapman & Hall/CRC

58-8

Handbook of Data Structures and Applications a

t

a

a

t

t

a

ta 8

ata ata ta taatata

aatat

aatata

atat

atata

a

t

3

t a

a

a aa at

g

ta aa 4

aat

a

ata ata taa taa ata ataatataat ta ata taatataa

t a

aatataata

atataa

atataata

tat aa

g

a

taatataata

aatataa

ata...g

...

a

tata

t g

taata

aa

tat

t

at aa ta

ataat

taa

g

t ata ata taatat

13 a

g

a

t

ata

at

tataat

t

a aat tat

2

a

a g

t a ...

1

g

g

FIGURE 58.2: A representation of the seven ≡x -classes for x = ataatataataatataatatag. The words in each class can be organized in a lattice. Numbers refer to the number of occurrences. substrings of x = ag coalesce into a single class which has two shortest words. Recall that by Lemma 58.1 each ≡x -class C can be expressed as the union of one or more left-equivalent classes. Alternatively, C can be also expressed as the union of one or more right-equivalent classes. The example above shows that there are cases in which left- or right-equivalent classes cannot be merge without violating the uniqueness of the shortest word. Thus, we may use the ≡x -classes as the Ci ’s in our partition only if we are interested in detecting over-represented words. If under-represented words are also wanted, then we must represent a same ≡x -class once for each distinct shortest word in it. It is not diﬃcult to accommodate this in the subtree merge procedure. Let p(u) denote the parent of u in Tx . While traversing Sx bottom-up, merge two nodes u and v with the same f count if and only if u and v are connected by a suﬃx link and so are p(u) and p(v). This results in a substring partition slightly coarser than ≡x . It will be denoted by ≡˜x . In conclusion, we can state the following fact. Let {C1 , C2 , . . . , Cl } be the set of equivalence classes built on the equivalence relation ≡˜x on the substrings of text x. Then, for all 1 ≤ i ≤ l,

FACT 58.2

1. max(Ci ) and min(Ci ) are unique 2. all w ∈ Ci are on some (min(Ci ), max(Ci ))-path 3. all w ∈ Ci have the same number of occurrences fx (w) We are now ready to address the computational complexity of our constructions. In [5], linear-time algorithms are given to compute and store expected value E(Zw ) and variance Var(Zw ) for the number of occurrences under Bernoulli model of all preﬁxes of a given string. The crux of that construction rests on deriving an expression of the variance (see Expression 58.1) that can be cast within the classical linear time computation of the “failure

© 2005 by Chapman & Hall/CRC

Computational Biology

58-9

function” or smallest periods for all preﬁxes of a string (see, e.g., [3]). These computations are easily adapted to be carried out on the linked structure of graphs such as Sx or Dx , thereby yielding expectation and variance values at all nodes of Tx , Dx , or the compact variant of the latter. These constructions take time and space linear in the size of the graphs, hence linear in the length of x. Combined with the monotonicity results this yields immediately: (Apostolico et al. [4]) Under the Bernoulli model, the sets OzT and UzT associated to the score fx (w) − E(Zw ) z(w) = Var(Zw ) √ √ can be computed in linear time and space, provided that pmax < min{1/ m 4m, 2 − 1}. THEOREM 58.2

The algorithm is implemented in a software tool called Verbumculus that can be found at http://www.cs.ucr.edu/∼stelo/Verbumculus/. A description of the tool and a demonstration of its applicability to the analysis of biological datasets will appear in [7].

58.3

Comparing Whole Genomes

As of today (mid 2003), Genbank contains “complete” genomes for more that 1,000 viruses, over 100 microbes, and about 100 eukariota. The abundance of complete genome sequences has given an enormous boost to comparative genomics. Association studies are emerging as a powerful tool for the functional identiﬁcation of genes and molecular genetics has begun to reveal the biological basis of diversity. Comparing the genomes of related species gives us new insights into the complex structure of organisms at the DNA-level and protein-level. The ﬁrst step when comparing genomes is to produce an alignment, i.e., a collinear arrangement of sequence similarities. Alignment of nucleic or amino acid sequences has been one of the most important methods in sequence analysis, with much dedicated research and now many sophisticated algorithms available for aligning sequences with similar regions. These require assigning a score to all the possible alignments (typically, the sum of the similarity/identity values for each aligned symbol, minus a penalty for the introduction of gaps), along with a dynamic programming method to ﬁnd optimal or near-optimal alignments according to this scoring scheme (see, e.g., [34]). These dynamic programming methods run in time proportional to the product of the length of the sequences to be aligned. Hence they are not suitable for aligning entire genomes. Recently several genome alignment programs have been developed, all using an anchor-based method to compute an alignment (for an overview see [13]). An anchor is an exact match of some minimum length occurring in all genomes to be aligned (see Figure 58.3). The anchor-based method can roughly be divided into the following three phases: (1) Computation of all potential anchors. (2) Computation of an optimal collinear sequence of non-overlapping potential anchors: these are the anchors that form the basis of the alignment (see Figure 58.4). (3) Closure of the gaps in between the anchors. In the following, we will focus on phase (1) and explain two algorithms to compute potential anchors. The ﬁrst algorithm allows one to align more than two genomes, while

© 2005 by Chapman & Hall/CRC

58-10

Handbook of Data Structures and Applications

FIGURE 58.3: Three genomes represented as horizontal lines. Potential anchors of an alignment are connected by vertical lines. Each anchor is a sequence occurring at least once in all three genomes.

FIGURE 58.4: A collinear chain of non-overlapping anchors. the second is limited to two genomes, but uses less space than the former. Both algorithms are based on suﬃx trees. For phase (2) of the anchor-based method, one uses methods from computational geometry. The interest reader is referred to the algorithms described in [1, 2, 33, 54]. In phase (3), one can apply any standard alignment methods, or even the same anchor-based method with relaxed parameters.

Basic Deﬁnitions We recall and extend the deﬁnition introduced in Section 58.2. A sequence, or a string, S of length n is written as S = S[0]S[1] . . . S[n − 1] = S[0 . . . n − 1]. A preﬁx of S is a sequence S[0 . . . i] for some i ∈ [0, n − 1]. A suﬃx of S is a sequence S[i . . . n − 1] for some i ∈ [0, n − 1]. Consider a set {G0 , . . . , Gk−1 } of k ≥ 2 sequences (the genomes) over some alphabet Σ. Let nq = |Gq | for q ∈ [0, k − 1]. To simplify the handling of boundary cases, assume that G0 [−1] = $−1 and Gk−1 [nk−1 ] = $k−1 are unique symbols not occurring in Σ. A multiple exact match is a (k + 1)-tuple (l, p0 , p1 , . . . , pk−1 ) such that l > 0, pq ∈ [0, nq − l], and Gq [pq . . . pq + l − 1] = Gq [pq . . . pq + l − 1] for all q, q ∈ [0, k − 1]. A multiple exact match is left maximal if for at least one pair (q, q ) ∈ [0, k − 1] × [0, k − 1], we have Gq [pq − 1] = Gq [pq − 1]. A multiple exact match is right maximal if for at least one pair (q, q ) ∈ [0, k − 1] × [0, k − 1], we have Gq [pq + l] = Gq [pq + l]. A multiple exact match is maximal if it is left maximal and right maximal. A maximal multiple exact match is also called multiMEM . Roughly speaking, a multiMEM is a sequence of length l that occurs in all sequences G0 , . . . , Gk−1 (at positions p0 , . . . , pk−1 ), and cannot simultaneously be extended to the left or to the right in every sequence. The -multiMEM -problem is to enumerate all multiMEMs of length at least for some given length threshold ≥ 1. For k = 2, we use the notion MEM and -MEM -problem.

© 2005 by Chapman & Hall/CRC

Computational Biology

58-11

Let $0 , . . . , $k−1 be pairwise diﬀerent symbols not occurring in any Gq . These symbols are used to separate the sequences in the concatenation S = G0 $0 G1 $1 . . . Gk−2 $k−2 Gk−1 . $k−1 will be used as a sentinel attached to the end of Gk−1 . All these special symbols are collected in a set Seps = {$−1 , $0 , . . . , $k−2 , $k−1 }. k−1 Let n = |S| = k − 1 + q=0 nq . For any i ∈ [0, n], let Si = S[i . . . n − 1]$k−1 denote the ith non-empty suﬃx of S$k−1 . Hence Sn = $k−1 . Deﬁne t0 = 0 and tq = tq−1 + nq−1 + 1 for any q ∈ [1, k]. tq is the start position of Gq in S for q ∈ [0, k − 1]. Let i ∈ [0, n − 1] such that S[i] ∈ / {$0 , . . . , $k−2 }. Deﬁne two functions σ and ρ as follows: • σ(i) = q if and only if i ∈ [tq , tq+1 − 2] • ρ(i) = i − tσ(i) That is, position i in S is identiﬁed with the relative position ρ(i) in sequence Gσ(i) . We consider trees whose edges are labeled by non-empty sequences. For each symbol a, - β for some sequence v and some every node α in these trees has at most one a-edge α av node β. Suppose a tree T and let α be a node in T . A node α is denoted by w if and only if w is the concatenation of the edge labels on the path from the root of T to α. A sequence w occurs in T if and only if T contains a node wv, for some sequence v. The suﬃx tree for S, denoted by ST(S), is the tree T with the following properties: (i) each node is either the root, a leaf or a branching node, and (ii) a sequence w occurs in T if and only if w is a substring of S$k−1 . For each branching node au in ST(S), where a is a symbol and u is a string, u is also a branching node, and there is a suﬃx link from au to u. There is a one-to-one correspondence between the leaves of ST(S) and the non-empty suﬃxes of S$k−1 : Leaf Si corresponds to suﬃx Si and vice versa. For any node u of ST(S) (including the leaves), let Pu be the set of positions i such that u is a preﬁx of Si . In other words, Pu is the set of positions in S where sequence u starts. Pu is divided into disjoint and possibly empty position sets: • For any q ∈ [0, k − 1], deﬁne Pu (q) = {i ∈ Pu | σ(i) = q}, i.e. Pu (q) is the set of positions i in S where u starts and i is a position in genome Gq . • For any a ∈ Σ ∪ Seps, deﬁne Pu (a) = {i ∈ Pu | S[i − 1] = a}, i.e. Pu (a) is the set of positions i in S where u starts and the symbol to the left of this position is a. • For any q ∈ [0, k − 1] and any a ∈ Σ ∪ Seps, deﬁne Pu (q, a) = Pu (q) ∩ Pu (a).

Computation of multiMEMs We now describe an algorithm to compute all multiMEMs, using the suﬃx tree for S. The algorithm is part of the current version of the multiple genome alignment software MGA. It improves on the method which was described in [24] and used in an earlier version of MGA. The algorithm computes position sets Pu (q, a) by processing the edges of the suﬃx tree in a bottom-up traversal. That is, the edge leading to node u is processed only after all edges in the subtree below u have been processed. If u is a leaf corresponding to, say suﬃx Si , then compute Pu (q, a) = {i} if σ(i) = q and S[i − 1] = a, and Pu (q, a) = ∅ otherwise. Now suppose that u is a branching node with r outgoing edges. These are processed in any order. Consider an edge u - w. Due to the bottom-up strategy, Pw is already computed. However, only a subset of Pu has been computed since only, say j < r, edges outgoing from u have been processed. The corresponding subset of Pu is denoted by Puj . The edge u - w is processed in the following way: At ﬁrst, multiMEMs are output by combining the positions in Puj and Pw . In particular, all (k + 1)-tuples (l, p0 , p1 , . . . , pk−1 ) satisfying the following conditions are enumerated:

© 2005 by Chapman & Hall/CRC

58-12

Handbook of Data Structures and Applications

(1) l = |u| (2) pq ∈ Puj (q) ∪ Pw (q) for any q ∈ [0, k − 1] (3) pq ∈ Puj (q) for at least one q ∈ [0, k − 1] (4) pq ∈ Pw (q) for at least one q ∈ [0, k − 1] (5) pq ∈ Pw (q, a) and pq ∈ Pw (q , b) for at least one pair (q, q ) ∈ [0, k − 1] × [0, k − 1] and diﬀerent symbols a and b. By deﬁnition of Pu , u occurs at positions p0 , p1 , . . . , pk−1 in S. Moreover, for q ∈ [0, k − 1], ρ(pq ) is a relative position of u in Gq . Hence (l, ρ(p0 ), ρ(p1 ), . . . , ρ(pk−1 )) is a multiple exact match. Conditions (3) and (4) guarantee that not all positions are exclusively taken from Puj (q) or from Pw (q). Hence at least two of the positions in {p0 , p1 , . . . , pk−1 } are taken from diﬀerent subtrees of u. This implies right maximality. Condition (5) guarantees left maximality. As soon as for the current edge u - w the multiMEMs are enumerated, the algorithm adds Pw (q, a) to Puj (q, a) to obtain position sets Puj+1 (q, a) for all q ∈ [0, k − 1] and all a ∈ Σ ∪ Seps. That is, the position sets are inherited from node w to the parent node u. Finally, Pu (q, a) is obtained as soon as all edges outgoing from u are processed. The algorithm performs two operations on position sets, as follows. Enumeration of multiple exact matches by combining position sets and accumulating position sets. A position set Pu (q, a) is the union of position sets from the subtrees below u. Recall that we considered processing an edge u - w. If the edges to the children of w have been processed, the position sets of the children are obsolete. Hence it is not required to copy position sets. At any time of the algorithm, each position is included in exactly one position set. Thus the position sets require O(n) space. For each branching node one maintains a table of k(|Σ|+1) references to possibly empty position sets. In particular, to achieve independence of the number of separator symbols, we store all positions from Pu (q, a), a ∈ Seps, in a single set. Hence, the space requirement for the position sets is O(|Σ|kn). The union operation for the position sets can be implemented in constant time using linked lists. For each node, there are O(|Σ|k) union operations. Since there are O(n) edges in the suﬃx tree, the union operations thus require O(|Σ|kn) time. Each combination of position sets requires to enumerate the following cartesian product: k−1

k−1 k−1 × (Pw (a) ∪ Pu (a)) × Puj (q) ∪ Pw (q) \ × Puj (q) ∪ × Pw (q) ∪ q=0

q=0

q=0

a∈Σ∪Seps

(58.2) The enumeration is done in three steps, as follows. In a ﬁrst step one enumerates all possible k-tuples (P0 , P1 , . . . , Pk−1 ) of non-empty sets where each Pq is either Puj (q) or Pw (q). Such a k-tuple is called father/child choice, since it speciﬁes to either choose a position from the father u (a father choice) or from the child w (a child choice). One rejects the two k-tuples specifying only father choices or only child choices and process the remaining father/child choices further. In the second step, for a ﬁxed father/child choice (P0 , P1 , . . . , Pk−1 ) one enumerates all possible k-tuples (a0 , . . . , ak−1 ) (called symbol choices) such that Pq (aq ) = ∅. At most |Σ| symbol choices consisting of k identical symbols (this can be decided in constant time) are rejected. The remaining symbol choices are processed further. In the third step, for a ﬁxed symbol choice (a0 , . . . , ak−1 ) we enumerate all possible k-tuples (p0 , . . . , pk−1 ) such that pq ∈ Pq (aq ) for q ∈ [0, k − 1]. By construction, each of these k-tuples represents a multiMEM of length l. The cartesian product (58.2) thus can be enumerated in O(k) space and in time proportional to its size. The suﬃx tree construction and the bottom-up traversal (without handling of position sets) requires O(n) time. Thus the algorithm described here runs in O(|Σ|kn) space and

© 2005 by Chapman & Hall/CRC

Computational Biology

58-13

O(|Σ|kn + z) time where z is the number of multiMEMs. It is still unclear if there is an algorithm which avoids the factors |Σ| or k in the space or time requirement.

Space eﬃcient computation of MEMs for two genomes The algorithm computes all MEMs of length at least by constructing the suﬃx tree of G0 and matches G1 against it. The matching process delivers substrings of G1 represented by locations in the suﬃx tree, where a location is deﬁned as follows: Suppose a string u occurs in ST(G0 ). If there is a branching node u, then u is the location of u. If v is the branching node of maximal depth, such that u = vw for some non-empty string w, then (v, w) is the location of u. The location of u is denoted by loc(u). ST(G0 ) represents all suﬃxes Ti = G0 [i . . . n0 − 1]$0 of G0 $0 . The algorithm processes G1 suﬃx by suﬃx from longest to shortest. In the jth step, the algorithm processes suﬃx Rj = G1 [j . . . n1 − 1]$2 and computes the locations of two preﬁxes pjmin and pjmax of Rj deﬁned as follows: • pjmax is the longest preﬁx of Rj that occurs in ST(G0 ). • pjmin is the preﬁx of pjmax of length min{, |pjmax|}. If |pjmin | < , then one skips Rj . If |pjmin | = , then at least one suﬃx represented in the subtree below loc(pjmin ) matches the ﬁrst characters of Rj . To extract the MEMs, this subtree is traversed in a depth ﬁrst order. The depth ﬁrst traversal maintains for each visited branching node u the length of the longest common preﬁx of u and Rj . Each time a leaf Ti is visited, one ﬁrst checks if G0 [i − 1] = G1 [j − 1]. If this is the case, then (⊥, ρ(i), ρ(j)) is a left maximal exact match and one determines the length l of the longest common preﬁx of Ti and Rj . By construction, l ≥ and G0 [i + l] = G1 [j + l]. Hence (l, ρ(i), ρ(j)) is a MEM . Now consider the diﬀerent steps of the algorithm in more detail: Computation of loc(pjmin ): For j = 0, one computes loc(pjmin ) by greedily matching G1 [0 . . . − 1] against ST(G0 ). For j ∈ [1, n1 − 1], one follows the suﬃx link of loc(pj−1 min ), if j−1 this is a branching node, or of v if loc(pmin ) = (v, w). This shortcut via the suﬃx link leads to a branching node on the path from the root to loc(pjmin ), from which one matches the next characters. The method is similar to the matching-statistics computation of [14], and one can show that its overall running time for the computation of all loc(pjmin ), j ∈ [0, n1 − 1], is O(n1 ). Computation of loc(pjmax ): Starting from loc(pjmin ) one computes loc(pjmax ) by greedily matching G1 [|pjmin | . . . nj − 1] against ST(G0 ). To facilitate the computation of longest common preﬁxes, one keeps track of the list of branching nodes on the path from loc(pjmin) to j j−1 loc(pjmax ). This list is called the match path. Since |pj−1 max | ≥ 1 implies |pmax | ≥ |pmax |− 1, we do not always have to match the edges of the suﬃx tree completely against the corresponding substring of G1 . Instead, to reach loc(pjmax ), one rescans most of the edges by only looking at the ﬁrst character of the edge label to determine the appropriate edge to follow. Thus the total time for this step in O(n1 + α) where α is the total length of all match paths. α is upper bounded by the total size β of the subtrees below loc(pjmin ), j ∈ [0, n1 − 1]. β is upper bounded by the number r of right maximal exact matches between G0 and G1 . Hence the running time for this step of the algorithm is O(n1 + r). The Depth ﬁrst traversal : This maintains an lcp-stack which stores for each visited branching node, say u, a pair of values (onmatchpath, lcpvalue), where the boolean value onmatchpath is true, if and only u is on the match path, and lcpvalue stores the length of the longest common preﬁx of u and Rj . Given the match path, the lcp-stack can be maintained in constant time for each branching node visited. For each leaf Ti visited during

© 2005 by Chapman & Hall/CRC

58-14

Handbook of Data Structures and Applications

the depth ﬁrst traversal, the lcp-stack allows to determine in constant time the length of the longest common preﬁx of Ti and Rj . As a consequence, the depth ﬁrst traversal requires time proportional to the size of the subtree. Thus the total time for all depth ﬁrst traversals of the subtrees below loc(pjmin), j ∈ [0, n1 − 1], is O(r). Altogether, the algorithm described here runs in O(n0 + n1 + r) time and O(n0 ) space. It is implemented as part of the new version of the MUMmer genome alignment program, see http://www.tigr.org/Software/mummer.

Acknowledgment This work was supported, in part, by Bourns College of Engineering, University of California, Riverside, and by the Center of Bioinformatics, University of Hamburg. We thank Jens Stoye and Klaus-Bernd Sch¨ urmann, University of Bielefeld, for helpful discussions and suggestions on the basic structure of the space eﬃcient algorithm to compute MEMs.

References [1] Abouelhoda, M. I., and Ohlebusch, E. Multiple genome alignment: Chaining algorithms revisited. In Proceedings of the 14th Annual Symposium on Combinatorial Pattern Matching, LNCS (2003), vol. 2676, Springer-Verlag, pp. 1–16. [2] Abouelhoda, M. I., and Ohlebusch, E. A local chaining algorithm and its applications in comparative genomics. In Proceedings of the 3rd Workshop on Algorithms in Bioinformatics, LNCS (2003), vol. 2812, Springer-Verlag, pp. 1–16. [3] Aho, A. V., Hopcroft, J. E., and Ullman, J. D. The design and analysis of computer algorithms. Addison-Wesley, Reading, MA, 1974. [4] Apostolico, A., Bock, M. E., and Lonardi, S. Monotony of surprise and large-scale quest for unusual words (extended abstract). In Proc. of Research in Computational Molecular Biology (RECOMB) (Washington, DC, April 2002), G. Myers, S. Hannenhalli, S. Istrail, P. Pevzner, and M. Waterman, Eds. Also in J. Comput. Bio., 10:3-4, (July 2003), 283–311. [5] Apostolico, A., Bock, M. E., Lonardi, S., and Xu, X. Eﬃcient detection of unusual words. J. Comput. Bio. 7, 1/2 (January 2000), 71–94. [6] Apostolico, A., Bock, M. E., and Xu, X. Annotated statistical indices for sequence analysis. In Sequences (Positano, Italy, 1998), B. Carpentieri, A. De Santis, U. Vaccaro, and J. Storer, Eds., IEEE Computer Society Press, pp. 215–229. [7] Apostolico, A., Gong, F., and Lonardi, S. Verbumculus and the discovery of unusual words. Journal of Computer Science and Technology (special issue in bioinformatics) , vol. 19, no. 1, pp. 22–41, 2004. [8] Apostolico, A., and Lonardi, S. A speed-up for the commute between subword trees and DAWGs. Information Processing Letters 83, 3 (2002), 159–161. [9] Blumer, A., Blumer, J., Ehrenfeucht, A., Haussler, D., and McConnel, R. Complete inverted ﬁles for eﬃcient text retrieval and analysis. J. Assoc. Comput. Mach. 34, 3 (1987), 578–595. ¯zma, A., Jonassen, I., Ukkonen, E., and Vilo, J. Predicting gene regula[10] Bra tory elements in silico on a genomic scale. Genome Research 8, 11 (1998), 1202–1215. [11] Burge, C., Campbell, A., and Karlin, S. Over- and under-representation of short oligonucleotides in DNA sequences. Proc. Natl. Acad. Sci. U.S.A. 89 (1992), 1358–1362.

© 2005 by Chapman & Hall/CRC

Computational Biology

58-15

[12] Castrignano, T., Colosimo, A., Morante, S., Parisi, V., and Rossi, G. C. A study of oligonucleotide occurrence distributions in DNA coding segments. J. Theor. Biol. 184, 4 (1997), 451–69. [13] Chain, P., Kurtz, S., Ohlebusch, E., and Slezak, T. An applications-focused review of comparative genomics tools: capabilities, limitations and future challenges. Brieﬁngs in Bioinformatics 4, 2 (2003), 105–123. [14] Chang, W. I., and Lawler, E. L. Sublinear approximate string matching and biological applications. Algorithmica 12, 4/5 (October/November 1994), 327–344. [15] Chen, T., and Skiena, S. S. Trie-based data structures for sequence assembly. In Proceedings of the 8th Annual Symposium on Combinatorial Pattern Matching (Aarhus, Denmark, 1997), A. Apostolico and J. Hein, Eds., no. 1264 in Lecture Notes in Computer Science, Springer-Verlag, Berlin, pp. 206–223. [16] Clift, B., Haussler, D., McConnell, R., Schneider, T. D., and Stormo, G. D. Sequence landscapes. Nucleic Acids Res. 14 (1986), 141–158. [17] Delcher, A., Kasif, S., Fleischmann, R., Peterson, J., White, O., and Salzberg, S. Alignment of whole genomes. Nucleic Acids Research 27, 11 (1999), 2369–2376. [18] Delcher, A. L., Phillippy, A., Carlton, J., and Salzberg, S. L. Fast algorithms for large-scale genome alignment and comparison. Nucleic Acids Research 30, 11 (2002), 2478–2483. [19] Fickett, J. W., Torney, D. C., and Wolf, D. R. Base compositional structure of genomes. Genomics 13 (1992), 1056–1064. [20] Gelfand, M. S., and Koonin, E. Avoidance of palindromic words in bacterial and archaeal genomes: A close connection with restriction enzymes. Nucleic Acids Res. 25 (1997), 2430–2439. [21] Gelfand, M. S., Koonin, E. V., and Mironov, A. A. Prediction of transcription regulatory sites in archaea by a comparative genomic approach. Nucleic Acids Res. 28, 3 (2000), 695–705. [22] Gentleman, J. The distribution of the frequency of subsequences in alphabetic sequences, as exempliﬁed by deoxyribonucleic acid. Appl. Statist. 43 (1994), 404–414. [23] Gusfield, D. Algorithms on Strings, Trees, and Sequences: Computer Science and Computational Biology. Cambridge University Press, 1997. ¨ hl, M., Kurtz, S., and Ohlebusch, E. Eﬃcient multiple genome alignment. [24] Ho Bioinformatics 18, Suppl. 1 (2002), S312–S320. [25] Karlin, S., Burge, C., and Campbell, A. M. Statistical analyses of counts and distributions of restriction sites in DNA sequences. Nucleic Acids Res. 20 (1992), 1363–1370. [26] Kleffe, J., and Borodovsky, M. First and second moment of counts of words in random texts generated by Markov chains. Comput. Appl. Biosci. 8 (1992), 433–441. [27] Kurtz, S., Choudhuri, J. V., Ohlebusch, E., Schleiermacher, C., Stoye, J., and Giegerich, R. REPuter: The manifold applications of repeat analysis on a genomic scale. Nucleic Acids Res. 29, 22 (2001), 4633–4642. [28] Leung, M. Y., Marsh, G. M., and Speed, T. P. Over and underrepresentation of short DNA words in herpes virus genomes. J. Comput. Bio. 3 (1996), 345–360. [29] Lothaire, M., Ed. Combinatorics on Words, second ed. Cambridge University Press, 1997. [30] Lothaire, M., Ed. Algebraic Combinatorics on Words. Cambridge University Press, 2002. [31] Marsan, L., and Sagot, M.-F. Algorithms for extracting structured motifs using a suﬃx tree with application to promoter and regulatory site consensus identiﬁcation.

© 2005 by Chapman & Hall/CRC

58-16

Handbook of Data Structures and Applications

J. Comput. Bio. 7, 3/4 (2000), 345–360. [32] McCreight, E. M. A space-economical suﬃx tree construction algorithm. J. Assoc. Comput. Mach. 23, 2 (April 1976), 262–272. [33] Myers, E. W., and Miller, W. Chaining multiple-alignment fragments in subquadratic time. In Proceedings of the 6th ACM-SIAM Annual Symposium on Discrete Algorithms (San Francisco, CA, 1995), pp. 38–47. [34] Needleman, S. B., and Wunsch, C. D. A general method applicable to the search for similarities in the amino acid sequence of two proteins. J. Mol. Biol. 48 (1970), 443–453. [35] Nussinov, R. The universal dinucleotide asymmetry rules in DNA and the amino acid codon choice. J. Mol. Evol. 17 (1981), 237–244. [36] Pavesi, G., Mauri, G., and Pesole, G. An algorithm for ﬁnding signals of unknown length in DNA sequences. In Proc. of the International Conference on Intelligent Systems for Molecular Biology (2001), AAAI press, Menlo Park, CA, pp. S207–S214. [37] Pavesi, G., Mauri, G., and Pesole, G. Methods for pattern discovery in unaligned biological sequences. Brieﬁngs in Bioinformatics 2, 4 (December 2001), 417– 430. [38] Pevzner, P. A., Borodovsky, M. Y., and Mironov, A. A. Linguistics of nucleotides sequences I: The signiﬁcance of deviations from mean statistical characteristics and prediction of the frequencies of occurrence of words. J. Biomol. Struct. Dynamics 6 (1989), 1013–1026. [39] Pevzner, P. A., Borodovsky, M. Y., and Mironov, A. A. Linguistics of nucleotides sequences II: Stationary words in genetic texts and the zonal structure of DNA. J. Biomol. Struct. Dynamics 6 (1989), 1027–1038. [40] Phillips, G. J., Arnold, J., and Ivarie, R. The eﬀect of codon usage on the oligonucleotide composition of the e. coli genome and identiﬁcation of over- and underrepresented sequences by Markov chain analysis. Nucleic Acids Res. 15 (1987), 2627–2638. [41] Rahmann, S. Rapid large-scale oligonucleotide selection for microarrays. In Proceedings of the First IEEE Computer Society Bioinformatics Conference (CSB’02) (2002), IEEE Press, pp. 54–63. [42] Rash, S., and Gusfield, D. String barcoding: Uncovering optimal virus signatures. In Proceedings of Sixth International Conference on Computational Molecular Biology (RECOMB 2002) (2002), ACM Press, pp. 254–261. egnier, M., and Szpankowski, W. On pattern frequency occurrences in a [43] R´ Markovian sequence. Algorithmica 22 (1998), 631–649. [44] Reinert, G., Schbath, S., and Waterman, M. S. Probabilistic and statistical properties of words: An overview. J. Comput. Bio. 7 (2000), 1–46. [45] Staden, R. Methods for discovering novel motifs in nucleic acid sequences. Comput. Appl. Biosci. 5, 5 (1989), 293–298. [46] Stoye, J., and Gusfield, D. Simple and Flexible Detection of Contiguous Repeats Using a Suﬃx Tree. Theor. Comput. Sci. 270, 1-2 (2002), 843–856. ¨ckle, E., Emmrich, C., Grob, U., and Nielsen, P. Statistical analysis of [47] Stu nucleotide sequences. Nucleic Acids Res. 18, 22 (1990), 6641–6647. [48] Tompa, M. An exact method for ﬁnding short motifs in sequences, with application to the ribosome binding site problem. In Seventh International Conference on Intelligent Systems for Molecular Biology (Heidelberg, Germany, August 1999), AAAI press, Menlo Park, CA, pp. 262–271. e, B., and Collado-Vides, J. Extracting regulatory [49] van Helden, J., Andr´

© 2005 by Chapman & Hall/CRC

Computational Biology

[50]

[51]

[52]

[53]

[54]

58-17

sites from the upstream region of the yeast genes by computational analysis of oligonucleotides. J. Mol. Biol. 281 (1998), 827–842. van Helden, J., Rios, A. F., and Collado-Vides, J. Discovering regulatory elements in non-coding sequences by analysis of spaced dyads. Nucleic Acids Res. 28, 8 (2000), 1808–1818. Volinia, S., Gambari, R., Bernardi, F., and Barrai, I. Co-localization of rare oligonucleotides and regulatory elements in mammalian upstream gene regions. J. Mol. Biol. 5, 1 (1989), 33–40. Volinia, S., Gambari, R., Bernardi, F., and Barrai, I. The frequency of oligonucleotides in mammalian genir regions. Comput. Appl. Biosci. 5, 1 (1989), 33–40. Weiner, P. Linear pattern matching algorithm. In Proceedings of the 14th Annual IEEE Symposium on Switching and Automata Theory (Washington, DC, 1973), pp. 1–11. Zhang, Z., Raghavachari, B., Hardison, R., and Miller, W. Chaining Multiple Alignment Blocks. J. Comput. Bio. 1, 3 (1994), 217–226.

© 2005 by Chapman & Hall/CRC

59 Elimination Structures in Scientiﬁc Computing 59.1

The Elimination Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59-2

The Elimination Game • The Elimination Tree Data Structure • An Algorithm • A Skeleton Graph • Supernodes

59.2

Applications of Etrees . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

59-8

Eﬃcient Symbolic Factorization • Predicting Row and Column Nonzero Counts • Three Classes of Factorization Algorithms • Scheduling Parallel Factorizations • Scheduling Out-of-Core Factorizations

59.3

The Clique Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-12 Chordal Graphs and Clique Trees • Design of Eﬃcient Algorithms with Clique Trees • Compact Clique Trees

59.4

Clique Covers and Quotient Graphs . . . . . . . . . . . . . 59-17 Clique Covers • Quotient Graphs • The Problem of Degree Updates • Covering the Column-Intersection Graph and Biclique Covers

Alex Pothen Old Dominion University

Sivan Toledo Tel Aviv University

59.5

Column Elimination Trees and Elimination DAGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-20 The Column Elimination Tree • Elimination DAGS Elimination Structures for the Asymmetric Multifrontal Algorithm

•

The most fundamental computation in numerical linear algebra is the factorization of a matrix as a product of two or more matrices with simpler structure. An important example is Gaussian elimination, in which a matrix is written as a product of a lower triangular matrix and an upper triangular matrix. The factorization is accomplished by elementary operations in which two or more rows (columns) are combined together to transform the matrix to the desired form. In Gaussian elimination, the desired form is an upper triangular matrix, in which nonzero elements below the diagonal have been transformed to be equal to zero. We say that the subdiagonal elements have been eliminated. (The transformations that accomplish the elimination yield a lower triangular matrix.) The input matrix is usually sparse, i.e., only a few of the matrix elements are nonzero to begin with; in this situation, row operations constructed to eliminate nonzero elements in some locations might create new nonzero elements, called ﬁll, in other locations, as a side-eﬀect. Data structures that predict ﬁll from graph models of the numerical algorithm, and algorithms that attempt to minimize ﬁll, are key ingredients of eﬃcient sparse matrix algorithms.

59-1

© 2005 by Chapman & Hall/CRC

59-2

Handbook of Data Structures and Applications

This chapter surveys these data structures, known as elimination structures, and the algorithms that construct and use them. We begin with the elimination tree, a data structure associated with symmetric Gaussian elimination, and we then describe its most important applications. Next we describe other data structures associated with symmetric Gaussian elimination, the clique tree, the clique cover, and the quotient graph. We then consider data structures that are associated with asymmetric Gaussian elimination, the column elimination tree and the elimination directed acyclic graph. This survey has been written with two purposes in mind. First, we introduce the algorithms community to these data structures and algorithms from combinatorial scientiﬁc computing; the initial subsections should be accessible to the non-expert. Second, we wish to brieﬂy survey the current state of the art, and the subsections dealing with the advanced topics move rapidly. A collection of articles describing developments in the ﬁeld circa 1991 may be found in [24]; Duﬀ provides a survey as of 1996 in [19].

59.1 59.1.1

The Elimination Tree The Elimination Game

Gaussian elimination of a symmetric positive deﬁnite matrix A, which factors the matrix A into the product of a lower triangular matrix L and its transpose LT , A = LLT , is one of the fundamental algorithms in scientiﬁc computing. It is also known as Cholesky factorization. We begin by considering the graph model of this computation performed on a symmetric matrix A that is sparse, i.e., few of its matrix elements are nonzero. The number of nonzeros in L and the work needed to compute L depend strongly on the (symmetric) ordering of the rows and columns of A. The graph model of sparse Gaussian elimination was introduced by Parter [58], and has been called the elimination game by Tarjan [70]. The goal of the elimination game is to symmetrically order the rows and columns of A to minimize the number of nonzeros in the factor L. We consider a sparse, symmetric positive deﬁnite matrix A with n rows and n columns, and its adjacency graph G(A) = (V, E) on n vertices. Each vertex in v ∈ V corresponds to the v-th row of A (and by symmetry, the v-th column); an edge (v, w) ∈ E corresponds to the nonzero avw (and by symmetry, the nonzero awv ). Since A is positive deﬁnite, its diagonal elements are positive; however, by convention, we do not explicitly represent a diagonal element avv by a loop (v, v) in the graph G(A). (We use v, w, . . . to indicate unnumbered vertices, and i, j, k, . . . to indicate numbered vertices in a graph.) We view the vertices of the graph G(A) as being initially unnumbered, and number them from 1 to n, as a consequence of the elimination game. To number a vertex v with the next available number, add new ﬁll edges to the current graph to make all currently unnumbered neighbors of v pairwise adjacent. (Note that the vertex v itself does not acquire any new neighbors in this step, and that v plays no further role in generating ﬁll edges in future numbering steps.) The graph that results at the end of the elimination game, which includes both the edges in the edge set E of the initial graph G(A) and the set of ﬁll edges, F , is called the ﬁlled graph. We denote it by G+ (A) = (V, E ∪ F ). The numbering of the vertices is called an elimination ordering, and corresponds to the order in which the columns are factored. An example of a ﬁlled graph resulting from the elimination game on a graph is shown in Fig. 59.1. We will use this graph to illustrate various concepts throughout this paper. The goal of the elimination game is to number the vertices to minimize the ﬁll since it would reduce the storage needed to perform the factorization, and also controls the work in the factorization. Unfortunately, this is an NP-hard problem [74]. However, for

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-3

8 7

1

10

2

9

11

6 5

4

3

FIGURE 59.1: A ﬁlled graph G+ (A) resulting from the elimination game on a graph G(A). The solid edges belong to G(A), and the broken edges are ﬁlled edges generated by the elimination game when vertices are eliminated in the order shown. classes of graphs that have small separators, it is possible to establish upper bounds on the number of edges in the ﬁlled graph, when the graph is ordered by a nested dissection algorithm that recursively computes separators. Planar graphs, graphs of ‘well-shaped’ ﬁnite element meshes (aspect ratios bounded away from small values), and overlap graphs possess elimination orderings with bounded ﬁll. Conversely, the ﬁll is large for graphs that do not have good separators. Approximation algorithms that incur ﬁll within a polylog factor of the optimum ﬁll have been designed by Agrawal, Klein and Ravi [1]; but since it involves ﬁnding approximate concurrent ﬂows with uniform capacities, it is an impractical approach for large problems. A more recent approximation algorithm, due to Natanzon, Shamir and Sharan [57], limits ﬁll to within the square of the optimal value; this approximation ratio is better than that of the former algorithm only for dense graphs. The elimination game produces sets of cliques in the graph. Let hadj+ (v) (ladj+ (v)) denote the higher-numbered (lower-numbered) neighbors of a vertex v in the graph G+ (A); in the elimination game, hadj+ (v) is the set of unnumbered neighbors of v immediately prior to the step in which v is numbered. When a vertex v is numbered, the set {v} ∪ hadj+ (v) becomes a clique by the rules of the elimination game. Future numbering steps and consequent ﬁll edges added do not change the adjacency set (in the ﬁlled graph) of the vertex v. (We will use hadj(v) and ladj(v) to refer to higher and lower adjacency sets of a vertex v in the original graph G(A).)

59.1.2

The Elimination Tree Data Structure

We deﬁne a forest from the ﬁlled graph by deﬁning the parent of a vertex v to be the lowest numbered vertex in hadj+ (v). It is clear that this deﬁnition of parent yields a forest since the parent of each vertex is numbered higher than itself. If the initial graph G(A) is

© 2005 by Chapman & Hall/CRC

59-4

Handbook of Data Structures and Applications

11 10 6

9

5

8

2

4

1

3

7

FIGURE 59.2: The elimination tree of the example graph. connected, then indeed we have a tree, the elimination tree; if not we have an elimination forest. In terms of the Cholesky factor L, the elimination tree is obtained by looking down each column below the diagonal element, and choosing the row index of the ﬁrst subdiagonal nonzero to be the parent of a column. It will turn out that we can compute the elimination tree corresponding to a matrix and a given ordering without ﬁrst computing the ﬁlled graph or the Cholesky factor. The elimination tree of the graph in Fig. 59.1 with the elimination ordering given there is shown in Fig. 59.2. A ﬁll path joining vertices i and j is a path in the original graph G(A) between vertices i and j, all of whose interior vertices are numbered lower than both i and j. The following theorem oﬀers a static characterization of what causes ﬁll in the elimination game. THEOREM 59.1 [64] The edge (i, j) is an edge in the ﬁlled graph if and only if a ﬁll path joins the vertices i and j in the original graph G(A).

In the example graph in Fig. 59.1, vertices 9 and 10 are joined a ﬁll path consisting of the interior vertices 7 and 8; thus (9, 10) is a ﬁll edge. The next theorem shows that an edge in the ﬁlled graph represents a dependence relation between its end points. THEOREM 59.2 [69] If (i, j) is an edge in the ﬁlled graph and i < j, then j is an ancestor of the vertex i in the elimination tree T (A).

This theorem suggests that the elimination tree represents the information ﬂow in the elimination game (and hence sparse symmetric Gaussian elimination). Each vertex i inﬂuences only its higher numbered neighbors (the numerical values in the column i aﬀect only those columns in hadj+ (i)). The elimination tree represents the information ﬂow in a minimal way in that we need consider only how the information ﬂows from i to its parent in the elimination tree. If j is the parent of i and is another higher neighbor of i, then since the higher neighbors of i form a clique, we have an edge (j, ) that joins j and ; since

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-5

by Theorem 59.2, is an ancestor of j, the information from i that aﬀects can be viewed as being passed from i ﬁrst to j, and then indirectly from j through its ancestors on the path in the elimination tree to . An immediate consequence of the Theorem 59.2 is the following result. COROLLARY 59.1 If vertices i and j belong to vertex-disjoint subtrees of the elimination tree, then no edge can join i and j in the ﬁlled graph.

Viewing the dependence relationships in sparse Cholesky factorization by means of the elimination tree, we see that any topological reordering of the elimination tree would be an elimination ordering with the same ﬁll, since it would not violate the dependence relationships. Such reorderings would not change the ﬁll or arithmetic operations needed in the factorization, but would change the schedule of operations in the factorization (i.e., when a speciﬁc operation is performed). This observation has been used in sparse matrix factorizations to schedule the computations for optimal performance on various computational platforms: multiprocessors, hierarchical memory machines, external memory algorithms, etc. A postordering of the elimination tree is typically used to improve the spatial and temporal data locality, and thereby the cache performance of sparse matrix factorizations. There are two other perspectives from which we can view the elimination tree. Consider directing each edge of the ﬁlled graph from its lower numbered endpoint to its higher numbered endpoint to obtain a directed acyclic graph (DAG). Now form the transitive reduction of the directed ﬁlled graph; i.e., delete an edge (i, k) whenever there is a directed path from i to k that does not use the edge (i, k) (this path necessarily consists of at least two edges since we do not admit multiple edges in the elimination game). The minimal graph that remains when all such edges have been deleted is unique, and is the elimination tree. One could also obtain the elimination tree by performing a depth-ﬁrst search (DFS) in the ﬁlled graph with the vertex numbered n as the initial vertex for the DFS, and choosing the highest numbered vertex in ladj+ (i) as the next vertex to search from a vertex i.

59.1.3

An Algorithm

We begin with a consequence of the repeated application of the following fact: If a vertex i is adjacent to a higher numbered neighbor k in the ﬁlled graph, and k is not the parent of i, pi , in the elimination tree, then i is adjacent to both k and pi in the ﬁlled graph; when i is eliminated, by the rules of the elimination game, a ﬁll edge joins pi and k. THEOREM 59.3 If (i, k) is an edge in the ﬁlled graph and i < k, then for every vertex j on an elimination tree path from i to k, (j, k) is also an edge in the ﬁlled graph.

This theorem leads to a characterization of ladj+ (k), the set of lower numbered neighbors of a vertex k in the ﬁlled graph, which will be useful in designing an eﬃcient algorithm for computing the elimination tree. The set ladj+ (k) corresponds to the column indices of nonzeros in the k-th row of the Cholesky factor L, and ladj(k) corresponds to the column indices of nonzeros in the lower triangle of the k-th row of the initial matrix A. [51] Every vertex in the set ladj+ (k) is a vertex reachable by paths in the elimination tree from a set of leaves to k; each leaf l corresponds to a vertex in the set ladj(k) such that no proper descendant d of l in the elimination tree belongs to the set ladj(k). THEOREM 59.4

Theorem 59.4 characterizes the k-th row of the Cholesky factor L as a row subtree Tr (k)

© 2005 by Chapman & Hall/CRC

59-6

Handbook of Data Structures and Applications

for k := 1 to n → pk := 0; for j ∈ ladj(k) (in increasing order) → ﬁnd the root r of the tree containing j; if (k = r) then k := pr ; ﬁ rof rof

FIGURE 59.3: An algorithm for computing an elimination tree. Initially each vertex is in a subtree with it as the root. of the elimination subtree rooted at the vertex k, and pruned at each leaf l. The leaves of the pruned subtree are contained among ladj(k), the column indices of the nonzeros in (the lower triangle of) the k-th row of A. In the elimination tree in Fig. 59.2, the pruned elimination subtree corresponding to row 11 has two leaves, vertices 5 and 7; it includes all vertices on the etree path from these leaves to the vertex 11. The observation above leads to an algorithm, shown in Fig. 59.3, for computing the elimination tree from the row structures of A, due to Liu [51]. This algorithm can be implemented eﬃciently using the union-ﬁnd data structure for disjoint sets. A height compressed version of the p. array, ancestor, makes it possible to compute the root fast; and union by rank in merging subtrees helps to keep the merged tree shallow. The time complexity of the algorithm is O(eα(e, n) + n), where n is the number of vertices and e is the number of edges in G(A), and α(e, n) is a functional inverse of Ackermann’s function. Liu [54] shows experimentally that path compression alone is more eﬃcient than path compression and union by rank, although the asymptotic complexity of the former is higher. Zmijewski and Gilbert [75] have designed a parallel algorithm for computing the elimination tree on distributed memory multiprocessors. The concept of the elimination tree was implicit in many papers before it was formally identiﬁed. The term elimination tree was ﬁrst used by Duﬀ [17], although he studied a slightly diﬀerent data structure; Schreiber [69] ﬁrst formally deﬁned the elimination tree, and its properties were established and used in several articles by Liu. Liu [54] also wrote an inﬂuential survey that delineated its importance in sparse matrix computations; we refer the reader to this survey for a more detailed discussion of the elimination tree current as of 1990.

59.1.4

A Skeleton Graph

The ﬁlled graph represents a supergraph of the initial graph G(A), and a skeleton graph represents a subgraph of the latter. Many sparse matrix algorithms can be made more eﬃcient by implicitly identifying the edges of a skeleton graph G− (A) from the graph G(A) and an elimination ordering, and performing computations only on these edges. A skeleton graph includes only the edges that correspond to the leaves in each row subtree in Theorem 59.4. The other edges in the initial graph G(A) can be discarded, since they will be generated as ﬁll edges during the elimination game. Since each leaf of a row subtree corresponds to an edge in G(A), the skeleton graph G− (A) is indeed a subgraph of the former. The skeleton graph of the example graph is shown in Fig. 59.4. The leaves in a row subtree can be identiﬁed from the set ladj(j) when the elimination tree is numbered in a postordering. The subtree T (i) is the subtree of the elimination tree

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-7

8 7

10

1

2

9

11

6 5

4

3

FIGURE 59.4: The skeleton graph G− (A) of the example graph. rooted at a vertex i, and |T (i)| is the number of vertices in that subtree. (It should not be confused with the row subtree Tr (i), which is a pruned subtree of the elimination tree.) THEOREM 59.5 [51] Let ladj(j) = {i1 < i2 < . . . < is }, and let the vertices of a ﬁlled graph be numbered in a postordering of its elimination tree T . Then vertex iq is a leaf of the row subtree Tr (j) if and only if either q = 1, or for q ≥ 2, iq−1 < iq − |T (iq )| + 1.

59.1.5

Supernodes

A supernode is a subset of vertices S of the ﬁlled graph that form a clique and have the same higher neighbors outside S. Supernodes play an important role in numerical algorithms since loops corresponding to columns in a supernode can be blocked to obtain high performance on modern computer architectures. We now proceed to deﬁne a supernode formally. A maximal clique in a graph is a set of vertices that induces a complete subgraph, but adding any other vertex to the set does not induce a complete subgraph. A supernode is a maximal clique {is , is+1 , . . . , is+t−1 } in a ﬁlled graph G+ (A) such that for each 1 ≤ j ≤ t−1, hadj+ (is ) = {is+1 , . . . , is+j } ∪ hadj+ (is+j ). Let hd+ (is ) ≡ |hadj+ (is )|; since hadj+ (is ) ⊆ {is+1 , . . . , is+j } ∪ hadj+ (is+j ), the relationship between the higher adjacency sets can be replaced by the equivalent test on higher degrees: hd+ (is ) = hd+ (is+j ) + j. In practice, fundamental supernodes, rather than the maximal supernodes deﬁned above, are used, since the former are easier to work with in the numerical factorization. A fundamental supernode is a clique but not necessarily a maximal clique, and satisﬁes two additional conditions: (1) is+j−1 is the only child of the vertex is+j in the elimination tree, for each 1 ≤ j ≤ t − 1; (2) the vertices in a supernode are ordered consecutively, usually by post-ordering the elimination tree. Thus vertices in a fundamental supernode form a path in the elimination tree; each of the non-terminal vertices in this path has only one child,

© 2005 by Chapman & Hall/CRC

59-8

Handbook of Data Structures and Applications

and the child belongs to the supernode. The fundamental supernodes corresponding to the example graph are: {1, 2}; {3, 4}; {5, 6}; {7, 8, 9}; and {10, 11}. Just as we could compute the elimination tree directly from G(A) without ﬁrst computing G+ (A), we can compute fundamental supernodes without computing the latter graph, using the theorem given below. Once the elimination tree is computed, this algorithm can be implemented in O(n + e) time, where e ≡ |E| is the number of edges in the original graph G(A). THEOREM 59.6 [56] A vertex i is the ﬁrst node of a fundamental supernode if and only if i has two or more children in the elimination tree T , or i is a leaf of some row subtree of T.

59.2 59.2.1

Applications of Etrees Eﬃcient Symbolic Factorization

Symbolic factorization (or symbolic elimination) is a process that computes the nonzero structure of the factors of a matrix without computing the numerical values of the nonzeros. The symbolic Cholesky factor of a matrix has several uses. It is used to allocate the data structure for the numeric factor and annotate it with all the row/column indices, which enables the removal of most of the non-numeric operations from the inner-most loop of the subsequent numeric factorization [20, 29]. It is also used to compute relaxed supernode (or amalgamated node) partitions, which group columns into supernodes even if they only have approximately the same structure [4, 21]. Symbolic factors can also be used in algorithms that construct approximate Cholesky factors by dropping nonzeros from a matrix A and factoring the resulting, sparser matrix B [6, 72]. In such algorithms, elements of A that are dropped from B but which appear in the symbolic factor of B can can be added to the matrix B; this improves the approximation without increasing the cost of factoring B. In all of these applications a supernodal symbolic factor (but not a relaxed one) is suﬃcient; there is no reason to explicitly represent columns that are known to be identical. The following algorithm for symbolically factoring a symmetric matrix A is due to George and Liu [28] (and in a more graph-oriented form due to [64]; see also [29, Section 5.4.3] and [54, Section 8]). The algorithm uses the elimination tree implicitly, but does not require it as input; the algorithm can actually compute the elimination tree on the ﬂy. The algorithm uses the observation that hadj+ (j) = hadj(j) ∪i,pi =j hadj+ (i) . That is, the structure of a column of L is the union of the structure of its children in the elimination tree and the structure of the same column in the lower triangular part of A. Identifying the children can be done using a given elimination tree, or the elimination tree can be constructed on the ﬂy by adding column i to the list of children of pi when the structure of i is computed (pi is the row index of the ﬁrst subdiagonal nonzero in column i of L). The union of a set of column structures is computed using a boolean array P of size n (whose elements are all initialized to false), and an integer stack to hold the newly created structure. A row index k from a child column or from the column of A is added to the stack only if P[k] = false. When row index k is added to the stack, P[k] is set to true to signal that k is already in the stack. When the computation of hadj+ (j) is completed, the stack is used to clear P so that it is ready for the next union operation. The total work in

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-9

the algorithm is Θ(|L|), since each nonzero requires constant work to create and constant work to merge into the parent column, if there is a parent. (Here |L| denotes the number of nonzeros in L, or equivalently the number of edges in the ﬁlled graph G+ (A); similarly |A| denotes the number of nonzeros in A, or the number of edges in the initial graph G(A).) The symbolic structure of the factor can usually be represented more compactly and computed more quickly by exploiting supernodes, since we essentially only need to represent the identity of each supernode (the constituent columns) and the structure of the ﬁrst (lowest numbered) column in each supernode. The structure of any column can be computed from this information in time proportional to the size of the column. The George-Liu columnmerge algorithm presented above can compute a supernodal symbolic factorization if it is given as input a supernodal elimination tree; such a tree can be computed in O(|A|) time by the Liu-Ng-Peyton algorithm [56]. In practice, this approach saves a signiﬁcant amount of work and storage. Clearly, column-oriented symbolic factorization algorithms can also generate the structure of rows in the same asymptotic work and storage. But a direct symbolic factorization by rows is less obvious. Whitten [73], in an unpublished manuscript cited by Tarjan and Yannakakis [71], proposed a row-oriented symbolic factorization algorithm (see also [51] and [54, Sections 3.2 and 8.2]). The algorithm uses the characterization of the structure of row i in L as the row subtree Tr (i). Given the elimination tree and the structure of A by rows, it is trivial to traverse the ith row subtree in time proportional to the number of nonzeros in row i of L. Hence, the elimination tree along with a row-oriented representation of A is an eﬀective implicit symbolic row-oriented representation of L; an explicit representation is usually not needed, but it can be generated in work and space O(|L|) from this implicit representation.

59.2.2

Predicting Row and Column Nonzero Counts

In some applications the explicit structure of columns of L is not required, only the number of nonzeros in each column or each row. Gilbert, Ng, and Peyton [38] describe an almostlinear-time algorithm for determining the number of nonzeros in each row and column of L. Applications for computing these counts fast include comparisons of ﬁll in alternative matrix orderings, preallocation of storage for a symbolic factorization, ﬁnding relaxed supernode partitions quickly, determining the load balance in parallel factorizations, and determining synchronization events in parallel factorizations. The algorithm to compute row counts is based on Whitten’s characterization [73]. We are trying to compute |Li∗ | = |Tr (i)|. The column indices j < i in row i of A deﬁne a subset of the vertices in the subtree of the elimination tree rooted at the vertex i, T [i]. The diﬃculty, of course, is counting the vertices in Tr (i) without enumerating them. The Gilbert-Ng-Peyton algorithm counts these vertices using three relatively simple mechanisms: (1) processing the column indices j < i in row i of A in postorder of the etree, (2) computing the distance of each vertex in the etree from the root, and (3) setting up a data structure to compute the least-common ancestor (LCA) of pairs of etree vertices. It is not hard to show that the once these preprocessing steps are completed, |Tr (i)| can be computed using |Ai∗ | LCA computations. The total cost of the preprocessing and the LCA computations is almost linear in |A|. Gilbert, Ng, and Peyton show how to further reduce the number of LCA computations. They exploit the fact that the leaves of Tr (i) are exactly the indices j that cause the creation of new supernodes in the Liu-Ng-Peyton supernode-ﬁnding algorithm [56]. This observation limits the LCA computations to leaves of row subtrees, i.e., edges in the skeleton graph G− (A). This signiﬁcantly reduces the running time in practice.

© 2005 by Chapman & Hall/CRC

59-10

Handbook of Data Structures and Applications

Eﬃciently computing the column counts in L is more diﬃcult. The Gilbert-Ng-Peyton algorithm assigns a weight w(j) to each etree vertex j, such that |L∗j | = k∈T [j] w(k). Therefore, the column-count of a vertex is the sum of the column counts of its children, plus its own weight. Hence, wj must compensate for (1) the diagonal elements of the children, which are not included in the column count for j, (2) for rows that are nonzero in column j but not in its children, and (3) for duplicate counting stemming from rows that appear in more than one child. The main diﬃculty lies in accounting for duplicates, which is done using least-common-ancestor computations, as in the row-counts algorithm. This algorithm, too, beneﬁts from handling only skeleton-graph edges. Gilbert, Ng, and Peyton [38] also show in their paper how to optimize these algorithms, so that a single pass over the nonzero structure of A suﬃces to compute the row counts, the column counts, and the fundamental supernodes.

59.2.3

Three Classes of Factorization Algorithms

There are three classes of algorithms used to implement sparse direct solvers: left-looking, right-looking, and multifrontal; all of them use the elimination tree to guide the computation of the factors. The major diﬀerence between the ﬁrst two of these algorithms is in how they schedule the computations they perform; the multifrontal algorithm organizes computations diﬀerently from the other two, and we explain this after introducing some concepts. The computations on the sparse matrix are decomposed into subtasks involving computations among dense submatrices (supernodes), and the precedence relations among them are captured by the supernodal elimination tree. The computation at each node of the elimination tree (subtask) involves the partial factorization of the dense submatrix associated with it. The right-looking algorithm is an eager updating scheme: Updates generated by the submatrix of the current subtask are applied immediately to future subtasks that it is linked to by edges in the ﬁlled graph of the sparse matrix. The left-looking algorithm is a lazy updating scheme: Updates generated by previous subtasks linked to the current subtask by edges in the ﬁlled adjacency graph of the sparse matrix are applied just prior to the factorization of the current submatrix. In both cases, updates always join a subtask to some ancestor subtask in the elimination tree. In the multifrontal scheme, updates always go from a child task to its parent in the elimination tree; an update that needs to be applied to some ancestor subtask is passed incrementally through a succession of vertices on the elimination tree path from the subtask to the ancestor. Thus the major diﬀerence among these three algorithms is how the data accesses and the computations are organized and scheduled, while satisfying the precedence relations captured by the elimination tree. An illustration of these is shown in Fig. 59.5.

59.2.4

Scheduling Parallel Factorizations

In a parallel factorization algorithm, dependences between nonzeros in L determine the set of admissible schedules. A diagonal nonzero can only be factored after all updates to it from previous columns have been applied, a subdiagonal nonzero can be scaled only after updates to it have been applied (and after the diagonal element has been factored), and two subdiagonal nonzeros can update elements in the reduced system only after they have been scaled. The elimination tree represents very compactly and conveniently a superset of these dependences. More speciﬁcally, the etree represents dependences between columns of L. A

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing left−looking

right−looking

59-11

multifrontal

FIGURE 59.5: Patterns of data access in the left-looking, right-looking, and multifrontal algorithms. A subtree of the elimination tree is shown, and the circled node corresponds to the current submatrix being factored. column can be completely factored only after all its descendants have been factored, and two columns that are not in an ancestor-descendant relationship can be factored in any order. Note that this is a superset of the element dependences, since a partially factored column can already perform some of the updates to its ancestors. But most sparse elimination algorithms treat column operations (or row operations) as atomic operations that are always performed by a single processor sequentially and with no interruption. For such algorithms, the etree represents exactly the relevant dependences. In essence, parallel column-oriented factorizations can factor the columns associated with diﬀerent children of an etree vertex simultaneously, but columns in an ancestor-descendant relationship must be processed in postorder. Diﬀerent algorithms diﬀer mainly in how updates are represented and scheduled. By computing the number of nonzeros in each column, a parallel factorization algorithm can determine the amount of computation and storage associated with each subtree in the elimination tree. This information can be used to assign tasks to processors in a loadbalanced way. Duﬀ was the ﬁrst to observe that the column dependences represented by the elimination tree can guide a parallel factorization [18]. In that paper Duﬀ proposed a parallel multifrontal factorization. The paper also proposed a way to deal with indeﬁnite and asymmetric systems, similar to Duﬀ and Reid’s sequential multifrontal approach [21]. For further references up to about 1997, see Heath’s survey [43]. Several implementations described in papers published after 1997 include PaStiX [45], PARADISO [68], WSSMP [42], and MUMPS [3], which also includes indeﬁnite and unsymmetric factorizations. All four are message-passing codes.

59.2.5

Scheduling Out-of-Core Factorizations

In an out-of-core factorization at least some of the data structures are stored on externalmemory devices (today almost exclusively magnetic disks). This allows such factorization algorithms to factor matrices that are too large to factor in main memory. The factor, which is usually the largest data structure in the factorization, is the most obvious candidate for storing on disks, but other data structures, for example the stack of update matrices in a multifrontal factorization, may also be stored on disks. Planning and optimizing out-of-core factorization schedules require information about

© 2005 by Chapman & Hall/CRC

59-12

Handbook of Data Structures and Applications

data dependences in the factorization and about the number of nonzeros in each column of the factor. The etree describes the required dependence information, and as explained above, it is also used to compute nonzero counts. Following Rothberg and Schreiber [66], we classify out-of-core algorithms into robust algorithms and non-robust algorithms. Robust algorithms adapt the factorization to complete with the core memory available by performing the data movement and computations at a smaller granularity when necessary. They partition the submatrices corresponding to the supernodes and stacks used in the factorization into smaller units called panels to ensure that the factorization completes with the available memory. Non-robust algorithms assume that the stack or a submatrix corresponding to a supernode ﬁts within the core memory provided. In general, non-robust algorithms read elements of the input matrix only once, read from disk nothing else, and they only write the factor elements to disk; Dobrian and Pothen refer to such algorithms as read-once-write-once, and to robust ones as read-manywrite-many [15]. Liu proposed [53] a non-robust method that works as long as for all j = 1, . . . , n, all the nonzeros in the submatrix Lj:n,1:j of the factor ﬁt simultaneously in main memory. Liu also shows in that paper how to reduce the amount of main memory required to factor a given matrix using this technique by reordering the children of vertices in the etree. Rothberg and Schreiber [65, 66] proposed a number of robust out-of-core factorization algorithms. They proposed multifrontal, left-looking, and hybrid multifrontal/left-looking methods. Rotkin and Toledo [67] proposed two additional robust methods, a more eﬃcient left-looking method, and a hybrid right/left-looking method. All of these methods use the etree together with column-nonzero counts to organize the out-of-core factorization process. Dobrian and Pothen [15] analyzed the amount of main memory required for read-oncewrite-once factorizations of matrices with several regular etree structures, and the amount of I/O that read-many-write-many factorizations perform on these matrices. They also provided simulations on problems with irregular elimination tree structures. These studies led them to conclude that an external memory sparse solver library needs to provide at least two of the factorization methods, since each method can out-perform the others on problems with diﬀerent characteristics. They have provided implementations of out-ofcore algorithms for all three of the multifrontal, left-looking, and right-looking factorization methods; these algorithms are included in the direct solver library OBLIO [16]. In addition to out-of-core techniques, there exist techniques that reduce the amount of main memory required to factor a matrix without using disks. Liu [52] showed how to minimize the size of the stack of update matrices in the multifrontal method by reordering the children of vertices in the etree; this method is closely related to [53]. Another approach, ﬁrst proposed by Eisenstat, Schultz and Sherman [23] uses a block factorization of the coefﬁcient matrix, but drops some of the oﬀ-diagonal blocks. Dropping these blocks reduces the amount of main memory required for storing the partial factor, but requires recomputation of these blocks when linear systems are solved using the partial factor. George and Liu [29, Chapter 6] proposed a general algorithm to partition matrices into blocks for this technique. Their algorithm uses quotient graphs, data structures that we describe later in this chapter.

59.3 59.3.1

The Clique Tree Chordal Graphs and Clique Trees

The ﬁlled graph G+ (A) that results from the elimination game on the matrix A (the adjacency graph of the Cholesky factor L) is a chordal graph, i.e., a graph in which every cycle on four or more vertices has an edge joining two non-consecutive vertices on the cycle [63].

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-13

(The latter edge is called a chord, whence the name chordal graph. This class of graphs has also been called triangulated or rigid circuit graphs.) A vertex v in a graph G is simplicial if its neighbors adj(v) form a clique. Every chordal graph is either a clique, or it has two non-adjacent simplicial vertices. (The simplicial vertices in the ﬁlled graph in Fig. 59.1 are 1, 2, 3, 4, 7, 8, and 9.) We can eliminate a simplicial vertex v without causing any ﬁll by the rules of the elimination game, since adj(v) is already a clique, and no ﬁll edge needs to be added. A chordal graph from which a simplicial vertex is eliminated continues to be a chordal graph. A perfect elimination ordering of a chordal graph is an ordering in which simplicial vertices are eliminated successively without causing any ﬁll during the elimination game. A graph is chordal if and only if it has a perfect elimination ordering. Suppose that the vertices of the adjacency graph G(A) of a sparse, symmetric matrix A have been re-numbered in an elimination ordering, and that G+ (A) corresponds to the ﬁlled graph obtained by the elimination game on G(A) with that ordering. This elimination ordering is a perfect elimination ordering of the ﬁlled graph G+ (A). Many other perfect elimination orderings are possible for G+ (A), since there are at least two simplicial vertices that can be chosen for elimination at each step, until the graph has one uneliminated vertex. It is possible to design eﬃcient algorithms on chordal graphs whose time complexity is much less than O(|E ∪ F |), where E ∪ F denotes the set of edges in the chordal ﬁlled graph. This is accomplished by representing chordal graphs by tree data structures deﬁned on the maximal cliques of the graph. (Recall that a clique K is maximal if K ∪ {v} is not a clique for any vertex v ∈ K.) Every maximal clique of a chordal ﬁlled graph G+ (A) is of the form K(v) = {v} ∪ hadj+ (v), with the vertices ordered in a perfect elimination ordering.

THEOREM 59.7

The vertex v is the lowest-numbered vertex in the maximal clique K(v), and is called the representative vertex of the clique. Since there can be at most n ≡ |V | representative vertices, a chordal graph can have at most n maximal cliques. The maximal cliques of the ﬁlled graph in Fig. 59.1 are: K1 = {1, 2, 5, 10}; K2 = {3, 4, 5, 6}; K3 = {5, 6, 10, 11}; and K4 = {7, 8, 9, 10, 11}. The lowest-numbered vertex in each maximal clique is its representative; note that in our notation K2 = K(3), K1 = K(1), K3 = K(5), and K4 = K(7). Let KG = {K1, K2, . . . , Km } denote the set of maximal cliques of a chordal graph G. Deﬁne a clique intersection graph with the maximal cliques as its vertices, with two maximal cliques Ki and Kj joined by an edge (Ki , Kj ) of weight |Ki ∩ Kj |. A clique tree corresponds to a maximum weight spanning tree (MST) of the clique intersection graph. Since the MST of a weighted graph need not be unique, a clique tree of a chordal graph is not necessarily unique either. In practice, a rooted clique tree is used in sparse matrix computations. Lewis, Peyton, and Pothen [48] and Pothen and Sun [62] have designed algorithms for computing rooted clique trees. The former algorithm uses the adjacency lists of the ﬁlled graph as input, while the latter uses the elimination tree. Both algorithms identify representative vertices by a simple degree test. We will discuss the latter algorithm. First, to deﬁne the concepts needed for the algorithm, consider that the the maximal cliques are ordered according to their representative vertices. This ordering partitions each maximal clique K(v) with representative vertex v into two subsets: new(K(v)) consists of vertices in the clique K(v) whose higher adjacency sets are contained in it but not in any earlier ordered maximal clique. The residual vertices in K(v)\ new(K(v)) form the ancestor set anc(K(v)). If a vertex w ∈ anc(K(v)), by deﬁnition of the ancestor set, w has a higher neighbor that is not adjacent to v; then by the rules of the elimination game, any higher-

© 2005 by Chapman & Hall/CRC

59-14

Handbook of Data Structures and Applications

for v := 1 to n → if v has a child u in etree with hd+ (v) + 1 = hd+ (u) then let Ku be the clique in which u is a new vertex; add v to the set new(Ku ); else make v the representative vertex of a maximal clique K(v); add v to the set new(K(v)); ﬁ for each child s of v in etree such that v and s are new vertices in diﬀerent cliques → let Ks be the clique in which s is a new vertex; make Ks a child of the clique Kv in which v is a new vertex; rof rof

FIGURE 59.6: An algorithm for computing a clique tree from an elimination tree, whose vertices are numbered in postorder. The variable hd+ (v) is the higher degree of a vertex v in the ﬁlled graph. numbered vertex x ∈ K(v) also belongs to anc(K(v)). Thus the partition of a maximal clique into new and ancestor sets is an ordered partition: vertices in new(K(v)) are ordered before vertices in anc(K(v)). We denote the lowest numbered vertex f in anc(K(v)) the ﬁrst ancestor of the clique K(v). A rooted clique tree may be deﬁned as follows: the parent of a clique K(v) is the clique P in which the ﬁrst ancestor vertex f of K appears as a vertex in new(P ). The reason for calling these subsets ‘new’ and ‘ancestor’ sets can be explained with respect to a rooted clique tree. We can build the chordal graph beginning with the root clique of the clique tree, successively adding one maximal clique at a time, proceeding down the clique tree in in-order. When a maximal clique K(v) is added, vertices in anc(K(v)) also belong to some ancestor clique(s) of K(v), while vertices in new(K(v)) appear for the ﬁrst time. A rooted clique tree, with vertices in new(K) and anc(K) identiﬁed for each clique K, is shown in Fig. 59.7. This clique tree algorithm can be implemented in O(n) time, once the elimination tree and the higher degrees have been computed. The rooted clique tree shown in Fig. 59.7, is computed from the example elimination tree and higher degrees of the vertices in the example ﬁlled graph, using the clique tree algorithm described above. The clique tree obtained from this algorithm is not unique. A second clique tree that could be obtained has the clique K(5) as the root clique, and the other cliques as leaves. A comprehensive review of clique trees and chordal graphs in sparse matrix computations, current as of 1991, is provided by Blair and Peyton [7].

59.3.2

Design of Eﬃcient Algorithms with Clique Trees

Shortest Elimination Trees. Jess and Kees [46] introduced the problem of modifying a ﬁll-reducing elimination ordering to enhance concurrency in a parallel factorization algorithm. Their approach was to generate a chordal ﬁlled graph from the elimination ordering, and then to eliminate a maximum independent set of simplicial vertices at each step, until all the vertices are eliminated. (This is a greedy algorithm in which the largest number of pairwise independent columns that do not cause ﬁll are eliminated in one step.) Liu

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-15

7,8,9,10,11

10,11 5,6

5,10 1,2

5,6 3,4

FIGURE 59.7: A clique tree of the example ﬁlled graph, computed from its elimination tree. Within each clique K in the clique tree, the vertices in new(K) are listed below the bar, and the vertices in anc(K) are listed above the bar. and Mirzaian [55] showed that this approach computed a shortest elimination tree over all perfect elimination orderings for a chordal graph, and provided an implementation linear in the number of edges of the ﬁlled graph. Lewis, Peyton, and Pothen [55] used the clique tree to provide a faster algorithm; their algorithm runs in time proportional to the size of the clique tree: the sum of the sizes of the maximal cliques of the chordal graph. A vertex is simplicial if and only if it belongs to exactly one maximal clique in the chordal graph; a maximum independent set of simplicial vertices is obtained by choosing one such vertex from each maximal clique that contains simplicial vertices, and thus the clique tree is a natural data structure for this problem. The challenging aspect of the algorithm is to update the rooted clique tree when simplicial vertices are eliminated and cliques that become non-maximal are absorbed by other maximal cliques. Parallel Triangular Solution. In solving systems of linear equations by factorization methods, usually the work involved in the factorization step dominates the work involved in the triangular solution step (although the communication costs and synchronization overheads of both steps are comparable). However, in some situations, many linear systems with the same coeﬃcient matrix but with diﬀerent right-hand-side vectors need to be solved. In such situations, it is tempting to replace the triangular solution step involving the factor matrix L by explicitly computing an inverse L−1 of the factor. Unfortunately L−1 can be much less sparse than the factor, and so a more space eﬃcient ‘product-form inverse’ needs to be employed. In this latter form, the inverse is represented as a product of triangular matrices such that all the matrices in the product together require exactly as much space as the original factor. The computation of the product form inverse leads to some interesting chordal graph partitioning problems that can be solved eﬃciently by using a clique tree data structure. We begin by directing each edge in the chordal ﬁlled graph G+ (A) from its lower to its higher numbered end point to obtain a directed acyclic graph (DAG). We will denote this

© 2005 by Chapman & Hall/CRC

59-16

Handbook of Data Structures and Applications

DAG by G(L). Given an edge (i, j) directed from i to j, we will call i the predecessor of j, and j the successor of i. The elimination ordering must eliminate vertices in a topological ordering of the DAG such that all predecessors of a vertex must be eliminated before it can be eliminated. The requirement that each matrix in the product form of the inverse must have the same nonzero structure as the corresponding columns in the factor is expressed by the fact that the subgraph corresponding to the matrix should be transitively closed. (A directed graph is transitively closed if whenever there is a directed path from a vertex i to a vertex j, there is an edge directed from i to j in the graph.) Given a set of vertices Pi , the column subgraph of Pi includes all the vertices in Pi and vertices reached by directed edges leaving vertices in Pi ; the edges in this subgraph include all edges with one or both endpoints in Pi . The simpler of the graph partitioning problems is the following: Find an ordered partition P1 ≺ P2 ≺ . . . Pm of the vertices of a directed acyclic ﬁlled graph G(L) such that 1. every v ∈ Pi has all of its predecessors included in P1 , . . ., Pi ; 2. the column subgraph of Pi is transitively closed; and 3. the number of subgraphs m is minimum over all topological orderings of G(L). Pothen and Alvarado [61] designed a greedy algorithm that runs in O(n) time to solve this partitioning problem by using the elimination tree. A more challenging variant of the problem minimizes the number of transitively closed subgraphs in G(L) over all perfect elimination orderings of the undirected chordal ﬁlled graph G+ (A). This variant could change the edges in the DAG G(L), (but not the edges in G+ (A)) since the initial ordering of the vertices is changed by the perfect elimination ordering, and after the reordering, edges are directed from the lower numbered end point to its higher numbered end point. This is quite a diﬃcult problem, but two surprisingly simple greedy algorithms solve it. Peyton, Pothen, and Yuan provide two diﬀerent algorithms for this problem; the ﬁrst algorithm uses the elimination tree and runs in time linear in the number of edges in the ﬁlled graph [59]. The second makes use of the clique tree, and computes the partition in time linear in the size of the clique tree [60]. Proving the correctness of these algorithms requires a careful study of the properties of the minimal vertex separators (these are vertices in the intersections of the maximal cliques) in the chordal ﬁlled graph.

59.3.3

Compact Clique Trees

In analogy with skeleton graphs, we can deﬁne a space-eﬃcient version of a clique tree representation of a chordal graph, called the compact clique tree. If K is the parent clique of a clique C in a clique tree, then it can be shown that anc(C) ⊂ K. Thus trading space for computation, we can delete the vertices in K that belong to the ancestor sets of its children, since we can recompute them when necessary by unioning the ancestor sets of the children. The partition into new and ancestor sets can be obtained by storing the lowest numbered ancestor vertex for each clique. A compact clique K c corresponding to a clique K is: K c = K \ ∪C∈child(K) anc(C). Note that the compact clique depends on the speciﬁc clique tree from which it is computed. A compact clique tree is obtained from a clique tree by replacing cliques by compact cliques for vertices. In the example clique tree, the compact cliques of the leaves are unchanged from the corresponding cliques; and the compact cliques of the interior cliques are K c (5) = {11}, and K c (7) = {7, 8, 9}.

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-17

The compact clique tree is potentially sparser (asymptotically O(n) instead of O(n2 ) even) than the skeleton graph on pathological examples, but on “practical” examples, the size diﬀerence between them is small. Compact clique trees were introduced by Pothen and Sun [62].

59.4

Clique Covers and Quotient Graphs

Clique covers and quotient graphs are data structures that were developed for the eﬃcient implementation of minimum-degree reordering heuristics for sparse matrices. In Gaussian elimination, an elimination step that uses aij as a pivot (the elimination of the jth unknown using the ith equation) modiﬁes every coeﬃcient akl for which akj = 0 and ail = 0. Minimum-degree heuristics attempt to select pivots for which the number of modiﬁed coefﬁcients is small.

59.4.1

Clique Covers

Recall the graph model of symmetric Gaussian elimination discussed in subsection 59.1.1. The adjacency graph of the matrix to be factored is an undirected graph G = (V, E), V = {1, 2, . . . , n}, E = {(i, j) : aij = 0}. The elimination of a row/column j corresponds to eliminating vertex j and adding edges to the remaining graph so that the neighbors of j become a clique. If we represent the edge set E using a clique cover, a set of cliques K = {K : K ⊆ V } such that E = ∪K∈K {(i, j) : i, j ∈ K}, the vertex elimination process becomes a process of merging cliques [63]: The elimination of vertex j corresponds to merging all the cliques that j belongs to into one clique and removing j from all the cliques. Clearly, all the old cliques that j used to belong to are now covered by the new clique, so they can be removed from the cover. The clique-cover can be initialized by representing every nonzero of A by a clique of size 2. This process corresponds exactly to symbolic elimination, which we have discussed in Section 59.2, and which costs Θ(|L|) work. The cliques correspond exactly to frontal matrices in the multifrontal factorization method. In the sparse-matrix literature, this model of Gaussian elimination has been sometimes called the generalized-element model or the super-element model, due to its relationship to ﬁnite-element models and matrices. The signiﬁcance of clique covers is due to the fact that in minimum-degree ordering codes, there is no need to store the structure of the partially computed factor, so when one clique is merged into another, it can indeed be removed from the cover. This implies that the total size K∈K |K| of the representation of the clique cover, which starts at exactly |A| − n, shrinks in every elimination step, so it is always bounded by |A| − n. Since exactly one clique is formed in every elimination step, the total number of cliques is also bounded, by n + (|A| − n) = |A|. In contrast, the storage required to explicitly represent the symbolic factor, or even to just explicitly represent the edges in the reduced matrix, can grow in every elimination step and is not bounded by O(|A|). Some minimum-degree codes represent cliques fully explicitly [8, 36]. This representation uses an array of cliques and an array of vertices; each clique is represented by a linked list of vertex indices, and each vertex is represented by a linked list of clique indices to which it belongs. The size of this data structure never grows—linked-list elements are moved from one list to another or are deleted during elimination steps, but new elements never need to be allocated once the data structure is initialized. Most codes, however, use a diﬀerent representation for clique covers, which we describe next.

© 2005 by Chapman & Hall/CRC

59-18

59.4.2

Handbook of Data Structures and Applications

Quotient Graphs

Most minimum-degree codes represent the graphs of reduced matrices during the elimination process using quotient graphs [25]. Given a graph G = (V, E) and a partition S of V into disjoint sets Sj ∈ S, the quotient graph G/S is the undirected graph (S, E) where E = {(Si , Sj ) : adj(Si ) ∩ Sj = ∅}. The representation of a graph G after the elimination of vertices 1, 2, . . . , j − 1, but before the elimination of vertex j, uses a quotient graph G/S, where S consists of sets Sk of eliminated vertices that form maximal connected components in G, and sets Si = {i} of uneliminated vertices i ≥ j. We denote a set Sk of eliminated vertices by the index k of the highest-numbered vertex in it. This quotient graph representation of an elimination graph corresponds to a clique cover representation as follows. Each edge in the quotient graph between uneliminated vertices S{i1 } and S{i2 } corresponds to a clique of size 2; all the neighbors of an eliminated set Sk correspond to a clique, the clique that was created when vertex k was eliminated. Note that all the neighbors of an uneliminated set Sk are uneliminated vertices, since uneliminated sets are maximal with respect to connectivity in G. The elimination of vertex j in the quotient-graph representation corresponds to marking Sj as eliminated and merging it with its eliminated neighbors, to maintain the maximal connectivity invariant. Clearly, a representation of the initial graph G using adjacency lists is also a representation of the corresponding quotient graph. George and Liu [26] show how to maintain the quotient graph eﬃciently using this representation without allocating more storage through a series of elimination steps. Most of the codes that implement minimum-degree ordering heuristics, such as GENMMD [50], AMD [2], and Spindle [14, 47], use quotient graphs to represent elimination graphs. It appears that the only advantage of a quotient graph over an explicit clique cover in the context of minimum-degree algorithms is a reduction by a small constant factor in the storage requirement, and possibly in the amount of work required. Quotient graphs, however, can also represent symmetric partitions of symmetric matrices in applications that are not directly related to elimination graphs. For example, George and Liu use quotient graphs to represent partitions of symmetric matrices into block matrices that can be factored without ﬁll in blocks that only contain zeros [29, Chapter 6]. In [27], George and Liu showed how to implement the minimum degree algorithm without modifying the representation of the input graph at all. In essence, this approach represents the quotient graph implicitly using the input graph and the indices of the eliminated vertices. The obvious drawback of this approach is that vertex elimination (as well as other required operations) are expensive.

59.4.3

The Problem of Degree Updates

The minimum-degree algorithm works by repeatedly eliminating the vertex with the minimum degree and turning its neighbors into a clique. If the reduced graph is represented by a clique cover or a quotient graph, then the representation does not reveal the degree of vertices. Therefore, when a vertex is eliminated from a graph represented by a clique cover or a quotient graph, the degrees of its neighbors must be recomputed. These degree updates can consume much of the running time of minimum-degree algorithms. Practical minimum-degree codes use several techniques to address this issue. Some techniques reduce the running time while preserving the invariant that the vertex that is elim-

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-19

inated always has the minimum degree. For example, mass elimination, the elimination of all the vertices of a supernode consecutively without recomputing degrees, can reduce the running time signiﬁcantly without violating this invariant. Other techniques, such as multiple elimination and the use of approximate degrees, do not preserve the minimum-degree invariant. This does not imply that the elimination orderings that such technique produce are inferior to true minimum-degree orderings. They are often superior to them. This is not a contradiction since the minimum-degree rule is just a heuristic which is rarely optimal. For further details, we refer the reader to George and Liu’s survey [30], to Amestoy, Davis, and Duﬀ’s paper on approximate minimum-degree rules [2], and to Kumfert and Pothen’s work on minimum-degree variants [14, 47]. Heggernes, Eisenstat, Kumfert and Pothen prove upper bounds on the running time of space-eﬃcient minimum-degree variants [44].

59.4.4

Covering the Column-Intersection Graph and Biclique Covers

Column orderings for minimizing ﬁll in Gaussian elimination with partial pivoting and in the orthogonal-triangular (QR, where Q is an orthogonal matrix, and R is an upper triangular matrix) factorization are often based on symmetric ﬁll minimization in the symmetric factor of AT A, whose graph is known as the the column intersection graph G∩ (A) (we ignore the possibility of numerical cancellation in AT A). To run a minimum-degree algorithm on the column intersection graph, a clique cover or quotient graph of it must be constructed. One obvious solution is to explicitly compute the edge-set of G∩ (A), but this is ineﬃcient, since G∩ (A) can be much denser than G(A). A better solution is to initialize the clique cover using a clique for every row of A; the vertices of the clique are the indices of the nonzeros in that row [30]. It is easy to see that each row in A indeed corresponds to a clique in G∩ (A). This approach is used in the COLMMD routine in Matlab [36] and in COLAMD [11]. A space-eﬃcient quotient-graph representation for G∩ (A) can be constructed by creating an adjacency-list representation of the symmetric 2-by-2 block matrix

I A AT 0 and eliminating vertices 1 through n. The graph of the Schur complement matrix G(0 − AT I (−1) A) = G(AT A) = G∩ (A). If we maintain a quotient-graph representation of the reduced graph through the ﬁrst n elimination steps, we obtain a space-eﬃcient quotient graph representation of the columnintersection graph. This is likely to be more expensive, however, than constructing the clique-cover representation from the rows of A. We learned of this idea from John Gilbert; we are not aware of any practical code that uses it. The nonzero structure of the Cholesky factor of AT A is only an upper bound on the structure of the LU factors in Gaussian elimination with partial pivoting. If the identities of the pivots are known, the nonzero structure of the reduced matrices can be represented using biclique covers. The nonzero structure of A is represented by a bipartite graph ({1, 2, . . . , n} ∪ {1 , 2 , . . . , n }, {(i, j ) : aij = 0}). A biclique is a complete bipartite graph on a subset of the vertices. Each elimination step corresponds to a removal of two connected vertices from the bipartite graph, and an addition of a new biclique. The vertices of the new biclique are the neighbors of the two eliminated vertices, but they are not the union of a set of bicliques. Hence, the storage requirement of this representation may exceed the storage required for the initial representation. Still, the storage requirement is always smaller

© 2005 by Chapman & Hall/CRC

59-20

Handbook of Data Structures and Applications

than the storage required to represent each edge of the reduced matrix explicitly. This representation poses the same degree update problem that symmetric clique covers pose, and the same techniques can be used to address it. Version 4 of UMFPACK, an asymmetric multifrontal LU factorization code, uses this idea together with a degree approximation technique to select pivots corresponding to relatively sparse rows in the reduced matrix [9].

59.5

Column Elimination Trees and Elimination DAGS

Elimination structures for asymmetric Gaussian elimination are somewhat more complex than the equivalent structures for symmetric elimination. The additional complexity arises because of two issues. First, the factorization of a sparse asymmetric matrix A, where A is factored into a lower triangular factor L and an upper triangular factor U , A = LU , is less structured than the sparse symmetric factorization process. In particular, the relationship between the nonzero structure of A and the nonzero structure of the factors is much more complex. Consequently, data structures for predicting ﬁll and representing data-ﬂow and control-ﬂow dependences in elimination algorithms are more complex and more diverse. Second, factoring an asymmetric matrix often requires pivoting, row and/or column exchanges, to ensure existence of the factors and numerical stability. For example, the 2-by-2 matrix A = [0 1; 1 0] does not have an LU factorization, because there is no way to eliminate the ﬁrst variable from the ﬁrst equation: that variable does not appear in the equation at all. But the permuted matrix P A does have a factorization, if P is a permutation matrix that exchanges the two rows of A. In ﬁnite precision arithmetic, row and/or column exchanges are necessary even when a nonzero but small diagonal element is encountered. Some sparse LU algorithms perform either row or column exchanges, but not both. The two cases are essentially equivalent (we can view one as a factorization of AT ), so we focus on row exchanges (partial pivoting). Other algorithms, primarily multifrontal algorithms, perform both row and column exchanges; these are discussed toward the end of this section. For completeness, we note that pivoting is also required in the factorization of sparse symmetric indeﬁnite matrices. Such matrices are usually factored into a product LDLT , where L is lower triangular and D is a block diagonal matrix with 1-by-1 and 2-by-2 blocks. There has not been much research about specialized elimination structures for these factorization algorithms; such codes invariably use the symmetric elimination tree of A to represent dependences for structure prediction and for scheduling the factorization. The complexity and diversity of asymmetric elimination arises not only due to pivoting, but also because asymmetric factorizations are less structured than symmetric ones, so a rooted tree can no longer represent the factors. Instead, directed acyclic graphs (dags) are used to represent the factors and dependences in the elimination process. We discuss elimination dags (edags) in Section 59.5.2. Surprisingly, dealing with partial pivoting turns out to be simpler than dealing with the asymmetry, so we focus next on the column elimination tree, an elimination structure for LU factorization with partial pivoting.

59.5.1

The Column Elimination Tree

The column elimination tree (col-etree) is the elimination tree of AT A, under the assumption that no numerical cancellation occurs in the formation of AT A. The signiﬁcance of this tree to LU with partial pivoting stems from a series of results that relate the structure of the LU factors of P A, where P is some permutation matrix, to the structure of the Cholesky factor of AT A.

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-21

8 7

1

10

2

9

11

6 5

4

3

FIGURE 59.8: The directed graph G(A) of an asymmetric matrix A. The column intersection graph of this graph G∩ (B) is exactly the graph shown in Figure 59.1, so the column elimination tree of A is the elimination tree shown in Figure 59.2. Note that the graph is sparser than the column intersection graph. George and Ng observed that, for any permutation matrix P , the structure of the LU factors of P A is contained in the structure of the Cholesky factor of AT A, as long as A does not have any zeros on its main diagonal [31]. (If there are zeros on the diagonal of a nonsingular A, the rows can always be permuted ﬁrst to achieve a zero-free diagonal.) Figure 59.8 illustrates this phenomenon. Gilbert [32] strengthened this result by showing that for every nonzero Rij in the Cholesky factor R of AT A = RT R, where A has a zero-free diagonal and no nontrivial block triangular form, there exists a matrix A(Uij ) with the same nonzero structure as A, such that in the LU factorization of A(Uij ) = P T L(Uij ) U (Uij ) with (U ) partial pivoting, Uij ij = 0. This kind of result is known as a one-at-a-time result, since it guarantees that every element of the predicted factor can ﬁll for some choice of numerical values in A, but not that all the elements can ﬁll simultaneously. Gilbert and Ng [37] later generalized this result to show that an equivalent one-at-a-time property is true for the lower-triangular factor. These results suggest that the col-etree, which is the elimination tree of AT A, can be used for scheduling and structure prediction in LU factorizations with partial pivoting. Because the characterization of the nonzero structure of the LU factors in terms of the structure of the Cholesky factor of AT A relies on one-at-a-time results, the predicted structure and predicted dependences are necessarily only loose upper bounds, but they are nonetheless useful. The col-etree is indeed useful in LU with partial pivoting. If Uij = 0, then by the results cited above Rij = 0 (recall that R is the Cholesky factor of the matrix AT A). This, in turn, implies that j is an ancestor of i in the col-etree. Since column i of L updates column j of L and U only if Uij = 0, the col-etree can be used as a task-dependence graph in columnoriented LU factorization codes with partial pivoting. This analysis is due to Gilbert, who used it to schedule a parallel factorization code [32]. The same technique is used in several current factorization codes, including SuperLU [12], SuperLU MT [13], UMFPACK 4 [9], and TAUCS [5, 40]. Gilbert and Grigori [33] recently showed that this characterization is tight in a strong all-at-once sense: for every strong Hall matrix A (i.e., A has no nontrivial

© 2005 by Chapman & Hall/CRC

59-22

Handbook of Data Structures and Applications

block-triangular form), there exists a permutation matrix P such that every edge of the col-etree corresponds to a nonzero in the upper-triangular factor of P A. This implies that the a-priori symbolic column-dependence structure predicted by the col-etree is as tight as possible. Like the etree of a symmetric matrix, the col-etree can be computed in time almost linear in the number of nonzeros in A [34]. This is done by an adaptation of the symmetric etree algorithm, an adaptation that does not compute explicitly the structure of AT A. Instead of constructing G(AT A), the algorithm constructs a much sparser graph G with the same elimination tree. The main idea is that each row of A contributes a clique to G(AT A); this means that each nonzero index in the row must be an ancestor of the preceding nonzero index. A graph in which this row-clique is replaced by a path has the same elimination tree, and it has only as many edges as there are nonzeros in A. The same paper shows not only how to compute the col-etree in almost linear time, but also how to bound the number of nonzeros in each row and column of the factors L and U , using again an extension of the symmetric algorithm to compute the number of nonzeros in the Cholesky factor of AT A. The decomposition of this Cholesky factor into fundamental supernodes, which the algorithm also computes, can be used to bound the extent of fundamental supernodes that will arise in L.

59.5.2

Elimination DAGS

The col-etree represents all possible column dependences for any sequence of pivot rows. For a speciﬁc sequence of pivots, the col-etree includes dependences that do not occur during the factorization with these pivots. There are two typical situations in which the pivoting sequence is known. The ﬁrst is when the matrix is known to have a stable LU factorization without pivoting. The most common case is when AT is strictly diagonally dominant. Even if A is not diagonally dominant, its rows can be pre-permuted to bring large elements to the diagonal. The permuted matrix, even if its transpose is not diagonally dominant, is fairly likely to have a relatively stable LU factorization that can be used to accurately solve linear systems of equations. This strategy is known as static pivoting [49]. The other situation in which the pivoting sequence is known is when the matrix, or part of it, has already been factored. Since virtually all sparse factorization algorithms need to collect information from the already-factored portion of the matrix before they factor the next row and column, a compact representation of the structure of this portion is useful. Elimination dags (edags) are directed acyclic graphs that capture a minimal or near minimal set of dependences in the factors. Several edags have been proposed in the literature. There are two reasons for this diversity. First, edags are not always as sparse and easy to compute as elimination trees, so researchers have tried to ﬁnd edags that are easy to compute, even if they represent a superset of the actual dependences. Second, edags often contain information only about a speciﬁc structure in the factors or a speciﬁc dependence in a speciﬁc elimination algorithm (e.g., data dependence in a multifrontal algorithm), so diﬀerent edags are used for diﬀerent applications. In other words, edags are not as universal as etrees in their applications. The simplest edag is the graph G(LT ) of the transpose of the lower triangular factor, if we view every edge in this graph as directed from the lower-numbered vertex to a highernumbered vertex. This corresponds to orienting edges from a row index to a column index in L. For example, if L6,3 = 0, we view the edge (6, 3) as a directed edge 3 → 6 in G(LT ). Let us denote by G((L(j−1) )T ) the partial lower triangular factor after j − 1 columns have been factored. Gilbert and Peierls showed that the nonzeros in the jth rows of L and U are exactly the vertices reachable, in G((L(j−1) )T ), from the nonzero indices in the jth column

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

The directed graph of the U factor; edge 7 direction is from lower to higher numbered vertices. 10 1

2

59-23

8 9

11

6 5

4

3

FIGURE 59.9: The directed graph of the U factor of the matrix whose graph is shown in Figure 59.8. In this particular case, the graph of LT is exactly the same graph, only with the direction of the edges reversed. Fill is indicated by dashed lines. Note that the ﬁll is indeed bounded by the ﬁll in the column-intersection graph, which is shown in Figure 59.1. However, that upper bound is not realized in this case: the edge (9, 10) ﬁlls in the columnintersection graph, but not in the LU factors. of A [39]. This observation allowed them to use a depth-ﬁrst search (DFS) to quickly ﬁnd the columns in the already-factored part of the matrix that update the jth column before it can be factored. This resulted in the ﬁrst algorithm that factored a general sparse matrix in time linear in the number of arithmetic operations (earlier algorithms sometimes performed much more work to manipulate the sparse data structure than the amount of work in the actual numerical computations). Eisenstat and Liu showed that a simple modiﬁcation of the graph G((L(j−1) )T ) can often eliminate many of its edges without reducing its ability to predict ﬁll [22]. They showed that if both Lik and Uki are nonzeros, then all the edges i → for > i can be safely pruned from the graph. In other words, the nonzeros in column k of L below row i can be pruned. This is true since if Uki = 0, then column k of L updates column i, so all the pruned nonzeros appear in column i, and since the edge k → i is in the graph, they are all reachable when k is reachable. This technique is called symmetric pruning. This edag is used in the SuperLU codes [12, 13] to ﬁnd the columns that update the next supernode (set of consecutive columns with the same nonzero structure in L). Note that the same codes use the col-etree to predict structure before the factorization begins, and an edag to compactly represent the structure of the already-factored block of A. Gilbert and Liu went a step further and studied the minimal edags that preserve the reachability property that is required to predict ﬁll [35]. These graphs, which they called the elimination dags are the transitive reductions of the directed graphs G(LT ) and G(U ). (The graph of U can be used to predict the row structures in the factors, just as G(LT ) can predict the column structures.) Since these graphs are acyclic, each graph has a unique transitive reduction; If A is symmetric, the transitive reduction is the symmetric elimination tree. Gilbert and Liu also proposed an algorithm to compute these transitive reductions row by row. Their algorithm computes the next row i of the transitive reduction of L by

© 2005 by Chapman & Hall/CRC

59-24

Handbook of Data Structures and Applications

The minimal dag of the U factor; edge 7 direction is from lower to higher numbered vertices. 10 1

2

8 9

11

6 5

4

3

FIGURE 59.10: The minimal edag of U ; this graph is the transitive reduction of the graph shown in Figure 59.9. traversing the reduction of U to compute the structure of row i of L, and then reducing it. Then the algorithm computes the structure of row i of U by combining the structures of earlier rows whose indices are the nonzeros in row i of L. In general, these minimal edags are often more expensive to compute than the symmetrically-pruned edags, due to the cost of transitively reducing each row. Gupta recently proposed a diﬀerent algorithm for computing the minimal edags [41]. His algorithm computes the minimal structure of U by rows and of L by columns. His algorithm essentially applies to both L and U the rule that Gilbert and Liu apply to U . By computing the structure of U by rows and of L by columns, Gupta’s algorithm can cheaply detect supernodes that are suitable for asymmetric multifrontal algorithms, where a supernode consists of a set of consecutive indices for which both the rows of U all have the same structure and the columns of L have the same structure (but the rows and columns may have diﬀerent structures).

59.5.3

Elimination Structures for the Asymmetric Multifrontal Algorithm

Asymmetric multifrontal LU factorization algorithms usually use both row and column exchanges. UMFPACK, the ﬁrst such algorithm, due to Davis and Duﬀ [10], used a pivoting strategy that factored an arbitrary row and column permutation of A. The algorithm tried to balance numerical and degree considerations in selecting the next row and column to be factored, but in principle, all row and column permutations were possible. Under such conditions, not much structure prediction is possible. The algorithm still used a clever elimination structure that we described earlier, a biclique cover, to represent the structure of the Schur complement (the remaining uneliminated equations and variables), but it did not use etrees or edags. Recent unsymmetric multifrontal algorithms still use pivoting strategies that allow both row and column exchanges, but the pivoting strategies are restricted enough that structure prediction is possible. These pivoting strategies are based on delayed pivoting, which was originally invented for symmetric indeﬁnite factorizations. One such code, Davis’s

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-25

UMFPACK 4, uses the column elimination tree to represent control-ﬂow dependences, and a biclique cover to represent data dependences [9]. Another code, Gupta’s WSMP, uses conventional minimal edags to represent control-ﬂow dependences, and specialized dags to represent data dependences [41]. More speciﬁcally, Gupta shows how to modify the minimal edags so they exactly represent data dependences in the unsymmetric multifrontal algorithm with no pivoting, and how to modify the edags to represent dependences in an unsymmetric multifrontal algorithm that employs delayed pivoting.

Acknowledgment Alex Pothen was supported, in part, by the National Science Foundation under grant CCR0306334, and by the Department of Energy under subcontract DE-FC02-01ER25476. Sivan Toledo was supported in part by an IBM Faculty Partnership Award, by grant 572/00 from the Israel Science Foundation (founded by the Israel Academy of Sciences and Humanities), and by Grant 2002261 from the US-Israeli Binational Science Foundation.

References [1] Ajit Agrawal, Philip Klein, and R. Ravi. Cutting down on ﬁll using nested dissection: Provably good elimination orderings. In [24], pages 31–55, 1993. [2] Patrick R. Amestoy, Timothy A. Davis, and Iain S. Duﬀ. An approximate minimum degree ordering algorithm. SIAM Journal on Matrix Analysis and Applications, 17(4):886–905, 1996. [3] Patrick R. Amestoy, Iain S. Duﬀ, Jean-Yves L’Excellent, and Jacko Koster. A fully asynchronous multifrontal solver using distributed dynamic scheduling. SIAM Journal on Matrix Analysis and Applications, 23(1):15–41, 2001. [4] Cleve Ashcraft and Roger Grimes. The inﬂuence of relaxed supernode partitions on the multifrontal method. ACM Transactions on Mathematical Software, 15(4):291–309, 1989. [5] Haim Avron and Sivan Toledo. A new parallel unsymmetric multifrontal sparse LU factorization. In preparation; presented at the 11th SIAM Conference on Parallel Processing for Scientiﬁc Computing, San Francisco, February 2004. [6] Marshall Bern, John R. Gilbert, Bruce Hendrickson, Nhat Nguyen, and Sivan Toledo. Support-graph preconditioners. Submitted to the SIAM Journal on Matrix Analysis and Applications, 29 pages, January 2001. [7] Jean R. S. Blair and Barry W. Peyton. An introduction to chordal graphs and clique trees. In [24], pages 1–30, 1993. [8] Tzu-Yi Chen, John R. Gilbert, and Sivan Toledo. Toward an eﬃcient column minimum degree code for symmetric multiprocessors. In Proceedings of the 9th SIAM Conference on Parallel Processing for Scientiﬁc Computing, San Antonio, Texas, 1999. 11 pp. on CDROM. [9] Timothy A. Davis. A column pre-ordering strategy for the unsymmetric-pattern multifrontal method. Technical Report TR-03-006, Department of Computer and Information Science and Engineering, University of Florida, May 2003. [10] Timothy A. Davis and Iain S. Duﬀ. An unsymmetric-pattern multifrontal method for sparse LU factorization. SIAM Journal on Matrix Analysis and Applications, 18:140–158, 1997. [11] Timothy A. Davis, John R. Gilbert, Stefan I. Larimore, and Esmond G. Ng. A column approximate minimum degree ordering algorithm. Technical Report TR-00-005, De-

© 2005 by Chapman & Hall/CRC

59-26

[12]

[13]

[14]

[15]

[16]

[17] [18] [19]

[20] [21] [22]

[23]

[24]

[25]

[26]

[27] [28] [29]

Handbook of Data Structures and Applications

partment of Computer and Information Science and Engineering, University of Florida, 2000. James W. Demmel, Stanley C. Eisenstat, John R. Gilbert, Xiaoye S. Li, and Joseph W. H. Liu. A supernodal approach to sparse partial pivoting. SIAM Journal on Matrix Analysis and Applications, 20:720–755, 1999. James W. Demmel, John R. Gilbert, and Xiaoye S. Li. An asynchronous parallel supernodal algorithm for sparse Gaussian elimination. SIAM Journal on Matrix Analysis and Applications, 20:915–952, 1999. Florin Dobrian, Gary Kumfert, and Alex Pothen. The design of a sparse direct solver library using object-oriented techniques. In A. M. Bruaset, H. P. Langtangen, and E. Quak, editors, Modern Software Tools in Scientiﬁc Computing, pages 89–131. Springer-Verlag, 2000. Florin Dobrian and Alex Pothen. The design of I/O-eﬃcient sparse direct solvers. In Proceedings of the 2001 ACM/IEEE conference on Supercomputing. ACM Press, 2001. 21 pp. on CDROM. Florin Dobrian and Alex Pothen. A comparison of three external memory algorithms for factoring sparse matrices. In Proceedings of the SIAM Conference on Applied Linear Algebra, 11 pages, SIAM, 2003. Iain S. Duﬀ. Full matrix techniques in sparse matrix factorizations. In G. A. Watson, editor, Lecture Notes in Mathematics, pages 71–84. Springer-Verlag, 1982. Iain S. Duﬀ. Parallel implementation of multifrontal schemes. Parallel Computing, 3:193–204, 1986. Iain S. Duﬀ. Sparse numerical linear algebra: direct methods and preconditioning. Technical Report RAL-TR-96-047, Department of Computation and Information, Rutherford Appleton Laboratory, Oxon OX11 0QX England, 1996. Iain S. Duﬀ, Albert M. Erisman, and John K. Reid. Direct Methods for Sparse Matrices. Oxford University Press, 1986. Iain S. Duﬀ and John K. Reid. The multifrontal solution of indeﬁnite sparse symmetric linear equations. ACM Transactions on Mathematical Software, 9:302–325, 1983. Stanley C. Eisenstat and Joseph W. H. Liu. Exploiting structural symmetry in unsymmetric sparse symbolic factorization. SIAM Journal on Matrix Analysis and Applications, 13:202–211, January 1992. Stanley C. Eisenstat, Martin H. Schultz, and Andrew H. Sherman. Software for sparse Gaussian elimination with limited core memory. In Ian. S. Duﬀ and C. W. Stewart, editors, Sparse Matrix Proceedings, pages 135–153. SIAM, Philadelphia, 1978. Alan George, John R. Gilbert, and Joseph W. H. Liu, editors. Graph Theory and Sparse Matrix Computation. Springer-Verlag, 1993. IMA Volumes in Applied Mathematics, Volume 56. Alan George and Joseph W. H. Liu. A quotient graph model for symmetric factorization. In Iain S. Duﬀ and G. W. Stewart, editors, Sparse Matrix Proceedings, pages 154–175. SIAM, Philadelphia, 1978. Alan George and Joseph W. H. Liu. A fast implementation of the minimum degree algorithm using quotient graphs. ACM Transactions on Mathematical Software, 6(3):337–358, 1980. Alan George and Joseph W. H. Liu. A minimal storage implementation of the minimum degree algorithm. SIAM Journal on Numerical Analysis, 17:283–299, 1980. Alan George and Joseph W. H. Liu. An optimal algorithm for symbolic factorization of symmetric matrices. SIAM Journal on Computing, 9:583–593, 1980. Alan George and Joseph W. H. Liu. Computer Solution of Large Sparse Positive Deﬁnite Systems. Prentice-Hall, 1981.

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-27

[30] Alan George and Joseph W. H. Liu. The evolution of the minimum-degree ordering algorithm. SIAM Review, 31:1–19, 1989. [31] Alan George and Esmond G. Ng. An implementation of Gaussian elimination with partial pivoting for sparse systems. SIAM Journal on Scientiﬁc and Statistical Computing, 6:390–409, 1985. [32] John R. Gilbert. An eﬃcient parallel sparse partial pivoting algorithm. Technical Report 88/45052-1, Christian Michelsen Institute, Bergen, Norway, 1988. [33] John R. Gilbert and Laura Grigori. A note on the column elimination tree. SIAM Journal on Matrix Analysis and Applications, 25:143–151, 2003. [34] John R. Gilbert, Xiaoye S. Li, Esmond G. Ng, and Barry W. Peyton. Computing row and column counts for sparse QR and LU factorization. BIT, 41:693–710, 2001. [35] John R. Gilbert and Joseph W. H. Liu. Elimination structures for unsymmetric sparse LU factors. SIAM Journal on Matrix Analysis and Applications, 14:334–352, 1993. [36] John R. Gilbert, Cleve Moler, and Robert S. Schreiber. Sparse matrices in MATLAB: Design and implementation. SIAM Journal on Matrix Analysis and Applications, 13(1):333–356, 1992. [37] John R. Gilbert and Esmond G. Ng. Predicting structure in nonsymmetric sparse matrix factorizations. In [24], pages 107–139, 1993. [38] John R. Gilbert, Esmond G. Ng, and Barry W. Peyton. An eﬃcient algorithm to compute row and column counts for sparse Cholesky factorization. SIAM Journal on Matrix Analysis and Applications, 15(4):1075–1091, 1994. [39] John R. Gilbert and Tim Peierls. Sparse partial pivoting in time proportional to arithmetic operations. SIAM Journal on Scientiﬁc and Statistical Computing, 9:862–874, 1988. [40] John R. Gilbert and Sivan Toledo. High-performance out-of-core sparse LU factorization. In Proceedings of the 9th SIAM Conference on Parallel Processing for Scientiﬁc Computing, San Antonio, Texas, 1999. 10 pp. on CDROM. [41] Anshul Gupta. Improved symbolic and numerical factorization algorithms for unsymmetric sparse matrices. SIAM Journal on Matrix Analysis and Applications, 24:529–552, 2002. [42] Anshul Gupta, Mahesh V. Joshi, and Vipin Kumar. WSSMP: A high-performance serial and parallel symmetric sparse linear solver. In Bo K˚ agstr¨om, Jack Dongarra, Erik Elmroth, and Jerzy Wasniewski, editors, Proceedings of the 4th International

[43]

[44]

[45]

[46] [47]

Workshop on Applied Parallel Computing, Large Scale Scientiﬁc and Industrial Problems (PARA ’98), volume 1541 of Lecture Notes in Computer Science, pages 182–194, Ume˚ a, Sweden, June 1998. Springer. Michael T. Heath. Parallel direct methods for sparse linear systems. In David E. Keyes, Ahmed Sameh, and V. Venkatakrishnan, editors, Parallel Numerical Algorithms, pages 55–90. Kluwer, 1997. Pinar Heggernes, Stanley C. Eisenstat, Gary Kumfert, and Alex Pothen. The computational complexity of the minimum degree algorithm. In Proceedings of the 14th Norwegian Computer Science Conference (NIK 2001), Tromso, Norway, November 2001, 12 pages. Also available as ICASE Report 2001-42, NASA/CR-2001-211421, NASA Langley Research Center. Pascal H´enon, Pierre Ramet, and Jean Roman. PaStiX: A high-performance parallel direct solver for sparse symmetric deﬁnite systems. Parallel Computing, 28(2):301– 321, 2002. J. Jess and H. Kees. A data structure for parallel LU decomposition. IEEE Transactions on Computers, C-31:231–239, 1982. Gary Karl Kumfert. An object-oriented algorithmic laboratory for ordering sparse

© 2005 by Chapman & Hall/CRC

59-28

Handbook of Data Structures and Applications

matrices. PhD thesis, Old Dominion University, December 2000. [48] John G. Lewis, Barry W. Peyton, and Alex Pothen. A fast algorithm for reordering sparse matrices for parallel factorization. SIAM Journal on Scientiﬁc Computing, 6:1147–1173, 1989. [49] Xiaoye S. Li and James W. Demmel. SuperLU DIST: A scalable distributed memory sparse direct solver for unsymmetric linear systems. ACM Transactions on Mathematical Software, 29:110–140, 2003. [50] Joseph W. H. Liu. Modiﬁcation of the minimum-degree algorithm by multiple elimination. ACM Transactions on Mathematical Software, 11(2):141–153, 1985. [51] Joseph W. H. Liu. A compact row storage scheme for Cholesky factors using elimination trees. ACM Transactions on Mathematical Software, 12(2):127–148, 1986. [52] Joseph W. H. Liu. On the storage requirement in the out-of-core multifrontal method for sparse factorization. ACM Transactions on Mathematical Software, 12(3):249– 264, 1986. [53] Joseph W. H. Liu. An adaptive general sparse out-of-core Cholesky factorization scheme. SIAM Journal on Scientiﬁc and Statistical Computing, 8(4):585–599, 1987. [54] Joseph W. H. Liu. The role of elimination trees in sparse factorization. SIAM Journal on Matrix Analysis and Applications, 11:134–172, 1990. [55] Joseph W. H. Liu and Andrew Mirzaian. A linear reordering algorithm for parallel pivoting of chordal graphs. SIAM Journal on Discrete Mathematics, 2:100–107, 1989. [56] Joseph W. H. Liu, Esmond G. Ng, and Barry W. Peyton. On ﬁnding supernodes for sparse matrix computations. SIAM Journal on Matrix Analysis and Applications, 14:242–252, 1993. [57] Assaf Natanzon, Ron Shamir, and Roded Sharan. A polynomial approximation algorithm for the minimum ﬁll-in problem. In Proceedings of the 30th Annual ACM Symposium on the Theory of Computing (STOC 98), pages 41–47, 1998. [58] Seymour V. Parter. The use of linear graphs in Gaussian elimination. SIAM Review, 3:119–130, 1961. [59] Barry W. Peyton, Alex Pothen, and Xiaoqing Yuan. Partitioning a chordal graph into transitive subgraphs for parallel sparse triangular solution. Linear Algebra and its Applications, 192:329–354, 1993. [60] Barry W. Peyton, Alex Pothen, and Xiaoqing Yuan. A clique tree algorithm for partitioning a chordal graph into transitive subgraphs. Linear Algebra and its Applications, 223:553–588, 1995. [61] Alex Pothen and Fernando Alvarado. A fast reordering algorithm for parallel sparse triangular solution. SIAM Journal on Scientiﬁc and Statistical Computation, 13:645– 653, 1992. [62] Alex Pothen and Chunguang Sun. Compact clique tree data structures for sparse matrix factorizations. In Thomas F. Coleman and Yuying Li, editors, Large Scale Numerical Optimization, pages 180–204. SIAM, Philadelphia, 1990. [63] Donald J. Rose. A graph-theoretic study of the numerical solution of sparse positive deﬁnite systems of linear equations. In R. C. Read, editor, Graph Theory and Computing, pages 183–217. Academic Press, New York, 1972. [64] Donald J. Rose, Robert E. Tarjan, and George S. Lueker. Algorithmic aspects of vertex elimination on graphs. SIAM Journal on Computing, 5:266–283, 1976. [65] Edward Rothberg and Robert S. Schreiber. An alternative approach to sparse out-ofcore factorization. presented at the 2nd SIAM Conference on Sparse Matrices, Coeur d’Alene, Idaho, October 1996. [66] Edward Rothberg and Robert S. Schreiber. Eﬃcient methods for out-of-core sparse

© 2005 by Chapman & Hall/CRC

Elimination Structures in Scientiﬁc Computing

59-29

Cholesky factorization. SIAM Journal on Scientiﬁc Computing, 21:129–144, 1999. [67] Vladimir Rotkin and Sivan Toledo. The design and implementation of a new outof-core sparse Cholesky factorization method. ACM Transactions on Mathematical Software, 30(1), March 2004. In press. [68] Olaf Schenk and Klaus G¨ artner. Sparse factorization with two-level scheduling in PARADISO. In Proceedings of the 10th SIAM Conference on Parallel Processing for Scientiﬁc Computing, Portsmouth, Virginia, March 2001. 10 pp. on CDROM. [69] Robert S. Schreiber. A new implementation of sparse Gaussian elimination. ACM Transactions on Mathematical Software, 8:256–276, 1982. [70] Robert E. Tarjan. Unpublished lecture notes. 1975. [71] Robert E. Tarjan and Mihalis Yannakakis. Simple linear-time algorithms to test chordality of graphs, test acyclicity of hypergraphs and selectively reduce acyclic hypergraphs. SIAM Journal of Computing, 13:566–579, 1984. Addendum in 14:254–255, 1985. [72] Pravin M. Vaidya. Solving linear equations with symmetric diagonally dominant matrices by constructing good preconditioners. Unpublished manuscript. A talk based on the manuscript was presented at the IMA Workshop on Graph Theory and Sparse Matrix Computation, October 1991, Minneapolis. [73] G. F. Whitten. Computation of ﬁll-in for sparse symmetric positive deﬁnite matrices. Technical report, Computer Science Department, Vanderbilt University, Nashville, TN, 1978. [74] Mihalis Yannakakis. Computing the minimum ﬁll-in is NP-complete. SIAM Journal on Algebraic and Discrete Methods, 2:77–79, 1981. [75] Earl Zmijewski and John R. Gilbert. A parallel algorithm for sparse symbolic Cholesky factorization on a multiprocessor. Parallel Computing, 7:199–210, 1988.

© 2005 by Chapman & Hall/CRC

60 Data Structures for Databases 60.1 60.2

Overview of the Functionality of a Database Management System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data Structures for Query Processing . . . . . . . . . . .

60-1 60-3

Index Structures • Sorting Large Data Sets • The Parse Tree • Expression Trees • Histograms

Joachim Hammer University of Florida

60.3 60.4

Record Organizations Organization

Markus Schneider University of Florida

60.1

Data Structures for Buﬀer Management . . . . . . . . 60-11 Data Structures for Disk Space Management . . 60-15

60.5

•

Page Organizations

•

File

Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-21

Overview of the Functionality of a Database Management System

Many of the previous chapters have shown that eﬃcient strategies for complex datastructuring problems are essential in the design of fast algorithms for a variety of applications, including combinatorial optimization, information retrieval and Web search, databases and data mining, and geometric applications. The goal of this chapter is to provide the reader with an overview of the important data structures that are used in the implementation of a modern, general-purpose database management system (DBMS). In earlier chapters of the book the reader has already been exposed to many of the data structures employed in a DBMS context (e.g., B-trees, buﬀer trees, quad trees, R-trees, interval trees, hashing). Hence, we will focus mainly on their application but also introduce other important data structures to solve some of the fundamental data management problems such as query processing and optimization, eﬃcient representation of data on disk, as well as the transfer of data from main memory to disk. Due to space constraints, we cannot cover applications of data structures to manage non-standard data such as multi-dimensional data, spatial and temporal data, multimedia data, or XML. Before we begin our treatment of how data structures are used in a DBMS, we brieﬂy review the basic architecture, its components, and their functionality. Unless otherwise noted, our discussion applies to a class of DBMSs that are based on the relational data model. These so-called relational database management systems make up the majority of systems in use today and are oﬀered by all major vendors including IBM, Microsoft, Oracle, and Sybase. Most of the components described here can also be found in DBMSs based on other models such as the object-based model or XML. Figure 60.1 depicts a conceptual overview of the main components that make up a DBMS. Rectangles represent system components, double-sided arrows represent input and output, and the solid connectors indicate data as well as process ﬂow between two components.

60-1

© 2005 by Chapman & Hall/CRC

60-2

Handbook of Data Structures and Applications

Database administrator

Users/applications

Query Evaluation Engine Query Compilation & Execution Sec. 2

Logging, Concurrency Control & Recovery

Storage Subsystem Buffer Manager Disk Space Manager

Transaction Processing Subsystem

Sec. 3 Sec. 4

DBMS

Database Data and Metadata

FIGURE 60.1: A simpliﬁed architecture of a database management system (DBMS). Please note that the inner workings of a DBMS are quite complex and we are not attempting to provide a detailed discussion of its implementation. For an in-depth treatment the reader should refer to one of the many excellent database textbooks books, e.g., [3–8]. Starting from the top, users interact with the DBMS via commands generated from a variety of user interfaces or application programs. These commands can either retrieve or update the data that is managed by the DBMS or create or update the underlying metadata that describes the schema of the data. The former are called queries, the latter are called data deﬁnition statements. Both types of commands are processed by the Query Evaluation Engine which contains components for parsing the input, producing an execution plan, and executing the plan against the underlying database. In the case of queries, the parsed command is presented to a query optimizer component, which uses information about how the data is stored to produce an eﬃcient execution plan from the possibly many alternatives. We discuss data structures that represent parsed queries, execution plans, and statistics about a database, including the data structures that are used by an external sorting algorithm in Section 60.2 when we focus on the query evaluation engine. Since databases are normally too large to ﬁt into the main memory of a computer, the data of a database resides in secondary memory, generally on one or more magnetic disks. However, to execute queries or modiﬁcations on data, that data must ﬁrst be transferred to main memory for processing and then back to disk for persistent storage. It is the job of the Storage Subsystem to accomplish a sophisticated placement of data on disk, to assure an eﬃcient localization of these persistent data, to enable their bidirectional transfer between disk and main memory, and to allow direct access to these data from other DBMS subsystems. The storage subsystem consists of two components: The Disk Space Manager is responsible for storing physical data items on disk, managing free regions of the disk space, hiding device properties from higher architecture levels, mapping physical blocks to tracks and sectors of a disc, and controlling the transfer of data items between external and main memory. The Buﬀer Manager organizes an assigned, limited main memory area called buﬀer and may comprise several smaller buﬀers (buﬀer pool). Other subsystems may have direct access to data items in these buﬀers. In Sections 60.3 and 60.4, we discuss data structures that are used to represent both data

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-3

in memory as well as on disk such as ﬁxed and variable-length records, large binary objects (LOBs), heap, sorted, and clustered ﬁles, as well as diﬀerent types of index structures. Given the fact that a database management system must manage data that is both resident in main memory as well as on disk, one has to deal with the reality that the most appropriate data structure for data stored on disk is diﬀerent from the data structures used for algorithms that run in main memory. Thus when implementing the storage manager, one has to pay careful attention to select not only the appropriate data structures but also to map the data between them in an eﬃcient manner. In addition to the above two subsystems, today’s modern DBMSs include a Transaction Management Subsystem to support concurrent execution of queries against the database and recovery from failure. Although transaction processing is an important and complex topic, it is less interesting for our investigation of data structures and is mentioned here only for completeness. The rest of this chapter is organized as follows. Section 60.2 describes important data structures used during query evaluation. Data structures used for buﬀer management are described in Section 60.3, and data structures used by the disk space manager are described in Section 60.4. Section 60.5 concludes the chapter.

60.2

Data Structures for Query Processing

Query evaluation is performed in main memory in several steps as outlined in Figure 60.2. Starting with the high-level input query expressed in a declarative language called SQL (see, for example, [2]) the Parser scans, parses, and validates the query. The goal is to check whether the query is formulated according to the syntax rules of the language supported in the DBMS. The parser also validates that all attribute and relation names are part of the database schema that is being queried. The parser produces a parse tree which serves as input to the Query Translation and Rewrite module shown underneath the parser. Here the query is translated into an internal representation, which is based on the relational algebra notation [1]. Besides its compact form, a major advantage of using relational algebra is that there exist transformations (rewrite rules) between equivalent expressions to explore alternate, more eﬃcient forms of the same query. Diﬀerent algebraic expressions for a query are called logical query plans and are represented as expression trees or operator trees. Using the re-write rules, the initial logical query plan is transformed into an equivalent plan that is expected to execute faster. Query re-writing is guided by heuristics which help reduce the amount of intermediary work that must be performed by the query in order to arrive at the same result. A particularly challenging problem is the selection of the best join ordering for queries involving the join of three or more relations. The reason is that the order in which the input relations are presented to a join operator (or any other binary operator for that matter) tends to have an important impact on the cost of the operation. Unfortunately, the number of candidate plans grows rapidly when the number of input relations grows. The outcome of the query translation and rewrite module is a set of “improved” logical query plans representing diﬀerent execution orders or combinations of operators of the original query. The Physical Plan Generator converts the logical query plans into physical query plans which contain information about the algorithms to be used in computing the relational operators represented in the plan. In addition, physical query plans also contain information about the access methods available for each relation. Access methods are ways of retrieving tuples from a table and consist of either a ﬁle scan (i.e., a complete retrieval of all tuples) or an index plus a matching selection condition. Given the many diﬀerent

© 2005 by Chapman & Hall/CRC

60-4

Handbook of Data Structures and Applications

high-level query

Physical Plan Generation

Parser

physical query plan

parse tree

Query Translation & Rewriting

logical query plan

Code Generation

executable code

FIGURE 60.2: Outline of query evaluation.

options for implementing relational operators and for accessing the data, each logical plan may lead to a large number of possible physical plans. Among the many possible plans, the physical plan generator evaluates the cost for each and chooses the one with the lowest overall cost. Finally, the best physical plan is submitted to the Code Generator which produces the executable code that is either executed directly or is stored and executed later whenever needed. Query re-writing and physical plan generation are referred to as query optimization. However, the term is misleading since in most cases the chosen plan represents a reasonably eﬃcient strategy for executing a query. In the following paragraphs, we focus on several important data structures that are used during query evaluation, some of which have been mentioned above: The parse tree for storing the parsed and validated input query (Section 60.2.3), the expression tree for representing logical and physical query plans (Section 60.2.4), and the histogram which is used to approximate the distribution of attribute values in the input relations (Section 60.2.5). We start with a summary of the well-known index structures and how they are used to speed up database operations. Since sorting plays an important role in query processing, we include a separate description of the data structures used to sort large data sets using external memory (Section 60.2.2).

60.2.1

Index Structures

An important part of the work of the physical plan generator is to choose an eﬃcient implementation for each of the operators in the query. For each relational operator (e.g., selection, projection, join) there are several alternative algorithms available for implementation. The best choice usually depends on factors such as size of the relation, available memory in the buﬀer pool, sort order of the input data, and availability of index structures. In the following, we brieﬂy highlight some of the important index structures that are used by a modern DBMS.

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-5

One-dimensional Indexes

One-dimensional indexes contain a single search key, which may be composed of multiple attributes. The most frequently used data structures for one-dimensional database indexes are dynamic tree-structured indexes such as B/B + -Trees (from now on collectively referred to as B-Trees, see also Chapter 15) and hash-based indexes using extendible and linear hashing (see Chapter 9). In general, hash-based indexes are especially good for equality searches. For example, in the case of an equality selection operation, one can use a onedimensional hash-based index structure to examine just the tuples that satisfy the given condition. Consider the selection of student records having a certain grade point average (GPA). Assuming students are randomly distributed throughout the relation, an index on the GPA value could lead us to only those records satisfying the selection condition and resulting in a lot fewer data transfers than a sequential scan of the relation (if we assume the tuples satisfying the condition make up only a fraction of the entire relation). Given their superior performance for equality searches hash-based indexes prove to be particularly useful in implementing relational operations such as joins. For example, the index-nested-loop join algorithm generates many equality selection queries, making the diﬀerence in cost between a hash-based and the slightly more expensive tree-based implementation signiﬁcant. B-Trees provide eﬃcient support for range searches (all data items that fall within a range of values) and are almost as good as hash-based indexes for equality searches. Besides their excellent performance, B-Trees are “self-tuning”, meaning they maintain as many levels of the index as is appropriate for the size of the relation being indexed. Unlike hash-based indexes, B-Trees manage the space on the disk blocks they use and do not require any overﬂow blocks. As we have mentioned in Sec. 60.1, database index structures are an example of data structures that have been designed as secondary memory structures. Multi-dimensional Indexes

In addition to these one-dimensional index structures, many applications (e.g., geographic database, inventory and sales database for decision-support) also require data structures capable of indexing data existing in two or higher-dimensional spaces. In these domains, important database operations are selections involving partial matches (all points that match speciﬁed values in one or more dimensions), range queries (all points that fall within a range of values in one or more dimensions), nearest-neighbor queries (closest point to a given point), and so-called “where-am-I” queries (all the regions in which a given point is located). The following are some of the most important data structures that support these types of operations. Grid ﬁle. A multi-dimensional extension of one-dimensional hash tables. Grid ﬁles support range queries, partial-match queries, and nearest-neighbor queries well, as long as data is uniformly distributed. Multiple-key index. The index on one attribute leads to indexes on another attribute for each value of the ﬁrst. Multiple-key indexes are useful for range and nearest-neighbor queries. R-tree. A B-Tree generalization suitable for collections of regions. R-Trees are used to represent a collection of regions by grouping them into a hierarchy of larger regions. They are well suited to support “where-am-I” queries as well as the other types of queries mentioned above if the atomic regions are individual points. (See also Chapter 21.)

© 2005 by Chapman & Hall/CRC

60-6

Handbook of Data Structures and Applications

Quad tree. Recursively divide a multi-dimensional data set into quadrants until each quadrant contains a minimal number of points (e.g., amount of data that can ﬁt on a disk block). Quad trees support partial-match, range, and nearest-neighbor queries well. (See also Chapter 19/) Bitmap index. A collection of bit vectors which encode the location of records with a given value in a given ﬁeld. Bitmap indexes support range, nearest-neighbor, and partial-match queries and are often employed in data warehouses and decisionsupport systems. Since bitmap indexes tend to get large when the underlying attributes have many values, they are often compressed using a run-length encoding. Given the importance of database support for non-standard applications, many relational database management systems support one or more of these multi-dimensional indexes, either directly (e.g., bitmap indexes), or as part of a special-purpose extension to the core database engine (e.g., R-trees in a spatial extender). In general, indexes are also used to answer certain types of queries without having to access the data ﬁle. For example, if we need only a few attribute values from each tuple and there is an index whose search key contains all these ﬁelds, we can choose an index scan instead of examining all data tuples. This is faster since index records are smaller (and hence ﬁt into fewer buﬀer pages). Note that an index scan does not make use of the search structure of the index: for example, in a B-Tree index one would examine all leaf pages in sequence. All commercial relational database management systems support B-Trees and at least one type of hash-based index structure.

60.2.2

Sorting Large Data Sets

The need to sort large data sets arises frequently in data management. Besides outputting the result of a query in sorted order, sorting is useful for eliminating duplicate data items during the processing of queries. In addition, an eﬃcient algorithm for performing a join operation (sort-merge join) requires the input relations to be sorted. Since the size of databases routinely exceeds the amount of available main memory, most DBMSs use an external sorting technique called merge sort, which is based on the main-memory version with the same name. The idea behind merge sort is that a ﬁle which does not ﬁt into main memory can be sorted by breaking it into smaller pieces (runs), sorting the smaller runs individually, and then merging them to produce a single run that contains the original data items in sorted order. External merge sort is another example where main memory versions of algorithms and data structures need to be changed to accommodate a computing environment where all data resides on secondary and perhaps even tertiary storage. We will point out more such examples in Section 60.4 when we describe the disk space manager. During the ﬁrst phase, also called the run-generation phase, merge-sort ﬁlls the available buﬀer pages in main memory with blocks containing the data records from a ﬁle stored on disk. We will have more to say about the management of buﬀer pages when we discuss data structures for buﬀer management in Section 60.3. Sorting is done using any of the main-memory algorithms (e.g., Heapsort, Quicksort). The sorted records are written back to new blocks on disk, forming a sorted run containing as many blocks as there are available buﬀer pages in main memory. This process is repeated until all records in the data ﬁle are in one of the sorted runs. The arrangement of buﬀer pages and disk blocks during run generation is depicted in Figure 60.3. In the second phase, also called the merging phase, all but one of the main memory buﬀers are used to hold input data from one of the sorted runs. In most instances, the number

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-7

Disk

Main Memory

…

Data file on n disk blocks

…

k buffer pages (k << n)

Disk

… ªn/kº sorted runs of size k disk blocks

…

FIGURE 60.3: Arrangement of buﬀer pages and disk blocks during the run generation phase. of sorted runs is less than the number of buﬀer pages and the merging can be done in one pass. Note, this so-called multi-way merging is diﬀerent from the main-memory version of merge sort which merges pairs of runs (two-way merge). The arrangement of buﬀers and disk blocks to complete this one-pass multi-way merging step is shown in Figure 60.4. Note that the two-way merge strategy results in reading data in and out of memory 2 ∗ log2 (n) times for n runs (versus reading all n runs only once for the n-way strategy).

Disk

Main Memory …

ªn/kº sorted runs of size k

…

… Disk

k-1 buffer pages for input; one for each sorted run

Select smallest unchosen data item for output

…

Sorted data file of length n

output buffer

FIGURE 60.4: Arrangement of buﬀer pages and disk blocks during the one pass, multi-way merging phase.

In situations when the number of sorted runs exceeds the available buﬀer pages in main memory, the merging step must be performed in several passes as follows: assuming k buﬀer pages in main memory, each pass involves the repeated merging of k − 1 runs until all runs have been merged. At this point the number of runs has been reduced by a factor of k − 1.

© 2005 by Chapman & Hall/CRC

60-8

Handbook of Data Structures and Applications

If the reduced number of sublists is still greater than k, the merging is repeated until the number of sublists is less than k. A ﬁnal merge generates the sorted output. In this scenario, the number of merge passes required is logk−1 (n/k).

60.2.3

The Parse Tree

A parse tree is an m-ary tree data structure that represents the structure of a query. Each interior node of the tree is labeled with a non-terminal symbol from the grammar of the query language. The root node is labeled with the goal symbol. The query being parsed appears at the bottom with each token of the query being a leaf in the tree. In the case of SQL, leaf nodes are lexical elements such as keywords of the language (e.g., SELECT ), names of attributes or relations, operators, and other schema elements. The parse tree for the SQL query selecting all the enrolled students with a GPA higher than 3.5. SELECT Name FROM Enrollment, Student WHERE ID = SID AND GPA > 3.5; is shown in Figure 60.5. For this example, we are tacitly assuming the existence of two relations called Enrollment and Student which store information about enrollment records for students in a school or university.

<SFW>

SELECT

<Sel-List>

Name

FROM

WHERE

,

Enrollment

AND Student

=

ID

SID

>

GPA

<Pattern>

3.5

FIGURE 60.5: Sample parse tree for an SQL query showing query goal, interior and leaf nodes. Adapted from Garcia-Molina et al. [4].

The parse tree shown in Figure 60.5 is based on the grammar for SQL as deﬁned in [4] (which is a subset of the full grammar for SQL). Non-terminal symbols are enclosed in angled brackets. At the root is the category < Query > which forms the goal for the parsed query. Descending down the tree, we see that this query is of the form SF W (select-fromwhere). In case one of the relations in the F ROM clause is a view, it must be replaced by

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-9

its own parse tree since a view is essentially a query. A parse tree is said to be valid if it conforms to the syntactic rules of the grammar as well as the semantic rules on the use of the schema names.

60.2.4

Expression Trees

An expression tree is a binary tree data structure that represents a logical query plan for a query after it has been translated into a relational algebra expression. The expression tree represents the input relations of the query as leaf nodes of the tree, and the relational algebra operations together with estimates for result sizes as internal nodes. Figure 60.6 shows an example of three expression trees representing diﬀerent logical query plans for the following SQL query, which selects all the students enrolled in the course ’COP 4720’ during the term ’Sp04’ who have a grade point average of 3.5 (result sizes are omitted in the ﬁgure): SELECT Name FROM Enrollment, Student WHERE Enrollment.ID = Student.SID AND Enrollment.Course = ’COP 4720’ AND Enrollment.TermCode = ’Sp04’ AND Student.GPA = 3.5; An execution of a tree consists of executing an internal node operation whenever its operands are available and then replacing that internal node by the relation that results from executing the operation. The execution terminates when the root node is executed and produces the result relation for the query. Note that expression trees representing physical query plans diﬀer in the information that is stored in the nodes. For example, internal nodes contain information such as the operation being performed, any parameters if necessary, general strategy about the algorithm that is used, whether materialization of intermediate results or pipelining is used, and the anticipated number of buﬀers the operation will require (rather than result size as in logical query plans). At the leaf nodes table names are replaced by scan operators such as TableScan, SortScan, IndexScan, etc.

SName

SName

SName

VGPA = 3.5

VCourse = ‘COP 4720’ VTermCode=‘Sp04’

AND Grade = ‘A’ AND TermCode = ‘Sp04’

AND Course = ‘COP 4720’ AND GPA = 3.5

ID = SID ID = SID

VTermCode=‘Sp04’ AND Course = ‘COP 4720’

ID = SID

VGPA = 3.5

Student Enrollment

Enrollment Enrollment

(a)

Student

(b)

Student

(c)

FIGURE 60.6: Three expression trees representing diﬀerent logical query plans for the same query.

© 2005 by Chapman & Hall/CRC

60-10

Handbook of Data Structures and Applications

There is an interesting twist to the types of expression trees that are actually considered by the query optimizer. As we have previously pointed out, the number of diﬀerent query plans (both logical and physical) for a given query can be very large. This is even more so the case, when the query involves the join of two or more relations since we need to take the join order into account when choosing the best possible plan. Today’s query optimizers prune a large portion of the candidate expression trees and concentrate only on the class of left-deep trees. A left-deep tree is an expression tree in which the right child of each join is a leaf (i.e., a base table). For example, in Figure 60.6, the tree labeled (a) is an example of a left-deep tree. The tree labeled (b) is an example of a nonlinear or bushy tree (a join node may have no leaf nodes), tree (c) is an example of a right-deep tree (the left child of each join node is a base table). Besides the fact that the number of left-deep trees is smaller than the number of all trees, there is another advantage for considering only left-deep expression trees: Left-deep trees allow the query optimizer to generate more eﬃcient plans by avoiding the intermediate storage (materialization) of join results. Note that in most join algorithms, the inner table must be materialized because we must examine the entire inner table for each tuple of the outer table. However, in a left-deep tree, all inner tables exist as base tables and are therefore already materialized. IBM DB2, Informix, Microsoft SQL Server, Oracle 8, and Sybase ASE all search for left-deep trees using a dynamic programming approach [7].

60.2.5

Histograms

Whether choosing a logical query plan or constructing a physical query plan from a logical query plan, the query evaluation engine needs to have information about the expected cost of evaluating the expressions in a query. Cost estimation is based on statistics about the database which include number of tuples in a relation, number of disk blocks used, distribution of values for each attribute, etc. Frequent computation of statistics, especially in light of many changes to the database, lead to more accurate cost estimates. However, the drawback is increased overhead since counting tuples and values is expensive. An important data structure for cost estimation is the histogram, which is used by the DBMS to approximate the distribution of values for a given attribute. Note that in all but the smallest databases, counting the exact occurrence of values is usually not an option. Having access to accurate distributions is essential in determining how many tuples satisfy a certain selection predicate, for example, how many students there are with a GPA value of 3.5. This is especially important in the case of joins, which are among the most expensive operations. For example, if a value of the join attribute appears in the histograms for both relations, we can determine exactly how many tuples of the result will have this value. Using a histogram, the data distribution is approximated by dividing the range of values, for example, GPA values, into subranges or buckets. Each bucket contains the number of tuples in the relation with GPA values within that bucket. Histograms are more accurate than assuming a uniform distribution across all values. Depending on how one divides the range of values into the buckets, we distinguish between equiwidth and equidepth histograms [7]. In equiwidth histograms, the value range is divided into buckets of equal size. In equidepth histograms, the value range is divided so that the number of tuples in each bucket is the same (usually within a small delta). In both cases, each bucket contains the average frequency. When the number of buckets gets large, histograms can be compressed, for example, by combining buckets with similar distributions. Consider the Students-Enrollments scenario from above. Figure 60.7 depicts two sample histograms for attribute GPA in relation Student. Values along the horizontal axis denote GPA, the vertical bars indicate the number of students that fall in each range. For this

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-11

a) Equiwidth

b) Equidepth 10.0

7.0 6.0 5.0 4.6

4.5

4.0

4.5

3.5

3.0

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

3.9

3.5

3.0

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

3.9

Bucket 1

Bucket 2

Bucket 3

Bucket 4

Bucket 5

Bucket 1

Bucket 2 Bucket 3 Bucket 4

Bucket 5

8 values

14 values

12 values

9 values

7 values

14 values

10 values 10 values 9 values

7 values

FIGURE 60.7: Two sample histograms approximating the distribution of GPA values in relation Student. Adapted from Ramakrishnan and Gehrke [7]. example we are assuming that GPA values are rounded to one decimal and that there are 50 students total. Histogram a) is an equiwidth histogram with bucket size = 2. Histogram b) is an equidepth histogram containing between 7 and 10 students per bucket. Consider the selection GP A = 3.5. Using the equidepth histogram, we are led to bucket 3, which contains only the GPA value 3.5 and we arrive at the correct answer, 10 (vs. 1/2 of 12 = 6 in the equiwidth histogram). In general, equidepth histograms provide better estimates than equiwidth histograms. This is due to the fact that buckets with very frequently occurring values contain fewer values. Thus the uniform distribution assumption is applied to a smaller range of values, leading to a more accurate estimate. The converse is true for buckets containing infrequent values, which are better approximated by equiwidth histograms. However, in query optimization, good estimation for frequent values are more important. Histograms are used by the query optimizers of all of the major DBMS vendors. For example, Sybase ASE, IBM DB2, Informix, and Oracle all use one-dimensional, equidepth histograms. Microsoft’s SQL Server uses one-dimensional equiarea histograms (a combination of equiwidth and equidepth) [7].

60.3

Data Structures for Buﬀer Management

A buﬀer is partitioned into an array of frames each of which can keep a page. Usually a page of a buﬀer is mapped to a block ∗ of a ﬁle so that reading and writing of a page only require one disk access each. Application programs and queries make requests on the buﬀer manager when they need a block from disk, that contains a data item of interest. If the

∗ A block is a contiguous sequence of bytes and represents the unit used for both storage allocation and data transfer. It is usually a multiple of 512 Bytes and has a typical size of 1KB to 8KB. It may contain several data items. Usually, a data item does not span two or more blocks.

© 2005 by Chapman & Hall/CRC

60-12

Handbook of Data Structures and Applications

block is already in the buﬀer, the buﬀer manager conveys the address of the block in main memory to the requester. If the block is not in main memory, the buﬀer manager ﬁrst allocates space in the buﬀer for the block, throwing out some other block if necessary, to make space for the new block. The displaced block is written back to disk if it was modiﬁed since the most recent time that it was written to the disk. Then, the buﬀer manager reads in the requested block from disk into the free frame of the buﬀer and passes the page address in main memory to the requester. A major goal of buﬀer management is to minimize the number of block transfers between the disk and the buﬀer. Besides pages, so-called segments are provided as a counterpart of ﬁles in main memory. This allows one to deﬁne diﬀerent segment types with additional attributes, which support varying requirements concerning data processing. A segment is organized as a contiguous subarea of the buﬀer in a virtual, linear address space with visible page borders. Thus, it consists of an ordered sequence of pages. Data items are managed so that page borders are respected. If a data item is required, the address of the page in the buﬀer containing the item is returned. An important question now is how segments are mapped to ﬁles. An appropriate mapping enables the storage system to preserve the merits of the ﬁle concept. The distribution of a segment over several ﬁles turns out to be unfavorable in the same way as the representation of a data item over several pages. Hence, a segment Sk is assigned to exactly one ﬁle Fj , and m segments can be stored in a ﬁle. Since block size and page size are the same, each page Pki ∈ Sk is assigned to a block Bjl ∈ Fj . We distinguish four methods of realizing this mapping. The direct page addressing assumes an implicitly given mapping between the pages of a segment Sk and the blocks of a ﬁle Fj . The page Pki (1 ≤ i ≤ sk ) is stored in the block Bjl (1 ≤ l ≤ dj ) so that l = Kj − 1 + i and dj ≥ Kj − 1 + sk holds. Kj denotes the number of the ﬁrst block reserved for Sk (Figure 60.8). Frequently, we have a restriction to a 1:1-mapping, i.e., Kj = 1 and sk = dj hold. Only in this case, a dynamic extension of segments is possible. A drawback is that at the time of the segment creation the assigned ﬁle area has to be allocated so that a block is occupied for each empty page. For segments whose data stock grows slowly, the ﬁxed block allocation leads to a low storage utilization. S

S 1

P

s e g m e n ts

1 1

P

1 2

...

2

...

P

2

P

1 ,s 1

P

2 1

...

2 2

F file

B 1

B

B

s 1

B

s 1 + 1

B

s 1 + 2

...

FIGURE 60.8: Direct page addressing.

The indirect page addressing oﬀers a much larger ﬂexibility for the allocation of pages to blocks and, in addition, dynamic update and extension functionality (Figure 60.9). It requires two auxiliary data structures. • Each segment Sk is associated with a page table Tk which for each page of the segment contains an entry indicating the block currently assigned to the page. Empty pages obtain a special null value in the page table. • Each ﬁle Fj is associated with a bit table Mj which serves for free disk space

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-13

management and quotes for each block whether currently a page is mapped to it or not. Mj (l) = 1 means that block Bjl is occupied; Mj (l) = 0 says that block Bjl is free. Hence, the bit table enables a dynamic assignment between pages and blocks.

Although this concept leads to an improved storage utilization, for large segments and ﬁles, the page tables and bit tables have to be split because of their size, transferred into main memory and managed in a special buﬀer. The provision of a page Pki that is not in the buﬀer can require two physical block accesses (and two enforced page removals), because, if necessary, the page table Tk has to be loaded ﬁrst in order to ﬁnd the current block address j = Tk (i). S

S 1

P

s e g m e n ts T

1 1

P

1 2

P

1 3

2

P

... T

1

p a g e ta b le s 2

q 3

...

0

P

2 1

P

2 2

...

2 3

2

0 1

p 0

...

0

0

F B

file

b it ta b le s fo r fr e e d is k s p a c e m a n a g e m e n t

M

1

1

B 2

2 1

B 3

1

... 3

4 1

p

p 5

0

B

0

...

B q

r q

1

1

0

d 0 0

0

FIGURE 60.9: Indirect page addressing.

The two methods described so far assume that a modiﬁed page is written back to the block that has once been assigned to it (update in place). If an error occurs within a transaction, as a result of the direct placement of updates, the recovery manager must provide enough log information (undo information) to be able to restore the old state of a page. Since the writing of large volumes of log data leads to notable eﬀort, it is often beneﬁcial to perform updates in a page in a manner so that the old state of the page is available until the end of the transaction. The following two methods are based on an indirect update of changes and provide extensive support for recovery. The twin slot method can be regarded as a modiﬁcation of the direct page addressing. It causes very low costs for recovery but partially compensates this advantage through double disk space utilization. For a page Pki of a segment Sk , two physically consecutive blocks Bjl−1 and Bjl of a ﬁle Fj with l = Kj − 1 + 2 · i are allocated. Alternately, at the beginning of a transaction, one of both block keeps the current state of the page whereas changes are written to the other block. In case of a page request, both blocks are read, and the block with the more recent state is provided as the current page in the buﬀer. The block with the older state then stores the changed page. By means of page locks, a transaction-oriented recovery concept can be realized without explicitly managing log data. The shadow paging concept (Figure 60.10) represents an extension of the indirect page addressing method and also supports indirect updates of changes. Before the beginning of a

© 2005 by Chapman & Hall/CRC

60-14

Handbook of Data Structures and Applications

new save-interval given by two save-points † the contents of all current pages of a segment are duplicated as so-called shadow pages and can thus be kept unchanged and consistent. This means, when a new save-point is created, all data structures belonging to the representation of a segment Sk (i.e., all occupied pages, the page table Tk , the bit table M ) are stored as a consistent snapshot of the segment on disk. All modiﬁcations during a save-interval are performed on copies Tk and M of Tk and M . Changed pages are not written back to their original but to free blocks. At the creation of a new save-point, which must be an atomic operation, the tables Tk and M as well as all pages that belong to this state and have been changed are written back to disk. Further, all those blocks are released whose pages were subject to changes during the last save-interval. This just concerns those shadow pages for which a more recent version exists. At the beginning of the next save-interval the current contents of Tk and M has to be copied again to Tk and M . In case of an error within a save-interval, the DBMS can roll back to the previous consistent state represented by Tk and M . T

T 1

p a g e ta b le s ( s h a d o w v e r s io n ) 2 S

q 3

...

0

1 S

1

P

s e g m e n ts

2

0

P

1 1

P

1 2

1 3

...

0

0

2

P

...

T 1'

p 0

P

2 1

P

2 2

...

2 3

T 2'

p a g e ta b le s ( c u r r e n t v e r s io n ) 4

r 3

+

... +

0

0

1

5

p +

...

0 0 = s h a d o w b it +

F B

file

B 2

M '1

b it ta b le s ( c u r r e n t v e r s io n ) b it ta b le s ( s h a d o w v e r s io n )

1

3

2

5

4 1

...

B p

1

q

...

r

0 1

q 1

d r

1

p 0

B

q 1

...

5 0

B

p

1

3 1

B 5

1

2 1

4

4

1

1

B

3

1 M

B

0

1

r

0

0

d 0

0

0

FIGURE 60.10: The shadow paging concept (segments S1 and S2 currently in process).

As an example, Figure 60.10 shows several changes of pages in two segments S1 and S2 . These changes are marked by so-called shadow bits in the page tables. Shadow bits are employed for the release of shadow pages at the creation time of new save-points. If a segment consists of s pages, the pertaining ﬁle must allocate s further blocks, because each changed page occupies two blocks within a save-interval. The save-points orientate themselves to segments and not to transaction borders. Hence,

† Transactions are usually considered as being atomic. But a limited concept of “subtransactions” allows one to establish intermediate save-points while the transaction is executing, and subsequently to roll back to a previously established save-point, if required, instead of having to roll back all the way to the beginning. Note that updates made at save-points are invisible to other transactions.

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-15

in an error case, a segment-oriented recovery is executed. For a transaction-oriented recovery additional log data have to be collected.

60.4

Data Structures for Disk Space Management

Placing data items on disc is usually performed at diﬀerent logical granularities. The most basic items found in relational or object-oriented database systems are the values of attributes. They consist of one or several bytes and are represented by ﬁelds. Fields, in turn, are put together in collections called records, which correspond to tuples or objects. Records need to be stored in physical blocks (see Section 60.3). A collection of records that forms a relation or the extent of a class is stored in some useful way as a collection of blocks, called a ﬁle.

60.4.1

Record Organizations

A collection of ﬁeld names and their corresponding data types constitute a record format or record type. The data type of a ﬁeld is usually one of the standard data types (e.g., integer, ﬂoat, bool, date, time). If all records in a ﬁle have the same size in bytes, we call them ﬁxed-length records. The ﬁelds of a record all have a ﬁxed length and are stored consecutively. If the base address, i.e., the start position, of a record is given, the address of a speciﬁc ﬁeld can be calculated as the sum of the lengths of the preceding ﬁelds. The sum assigned to each ﬁeld is called the oﬀset of this ﬁeld. Record and ﬁeld information are stored in the data dictionary. Figure 60.11 illustrates this record organization.

F

F 1

L 1

b a s e a d d re s s (B )

F 2

L 2

3

L 3

a d d re s s (F 3) = B + L

F

F 4

L 4 1

i

= fie ld v a lu e i

L i = le n g th o f fie ld v a lu e i + L 2

o ffs e t(F 3) = L 1

+ L 2

FIGURE 60.11: Organization of records with ﬁelds of ﬁxed length.

Fixed-length records are easy to manage and allow the use of eﬃcient search methods. But this implies that all ﬁelds have a size so that all data items that potentially are to be stored may ﬁnd space. This can lead to a waste of disk space and to more unfavorable access times. If we assume that each record of a ﬁle has the same, ﬁxed number of ﬁelds, a variablelength record can only be formed if some ﬁelds have a variable length. For example, a string representing the name of an employee can have a varying length in diﬀerent records. Diﬀerent data structures exist for implementing variable-length records. A ﬁrst possible organization amounts to a consecutive sequence of ﬁelds which are interrupted by separators (such as ? or % or $). Separators are special symbols that do not occur in data items. A special terminator symbol indicates the end of the record. But this organization requires a pass (scan) of the record to be able to ﬁnd a ﬁeld of interest (Figure 60.12). Instead of separators, each ﬁeld of variable length can also start with a counter that speciﬁes the needed number of bytes of a ﬁeld value. Another alternative is that a header precedes the record. A header represents the “administrative” part of the record and can include information about integer oﬀsets of the

© 2005 by Chapman & Hall/CRC

60-16

Handbook of Data Structures and Applications F

F &

1

... &

2

F &

F $

n

O O 1

O 2

...

O n

O

n + 1

F 1

F 2

...

F n

= fie ld v a lu e i i i

= o ffs e t fo r fie ld v a lu e i

& = s e p a r a to r fo r fie ld v a lu e $ = te r m in a to r fo r r e c o r d

FIGURE 60.12: Alternative organizations of records with ﬁelds of variable length. beginnings of the ﬁeld values (Figure 60.12). The ith integer number is then the start address of the ith ﬁeld value relatively to the beginning of the record. Also for the end of the record we must store an oﬀset in order to know the end of the last ﬁeld value. This alternative is usually the better one. Costs arise due to the header in terms of storage; the beneﬁt is direct ﬁeld access. Problems arise with changes. An update can let a ﬁeld value grow which necessitates a “shift” of all consecutive ﬁelds. Besides, it can happen that a modiﬁed record does not ﬁt any more on the page assigned to it and has to be moved to another page. If record identiﬁers contain a page number, on this page the new page number has to be left behind pointing to the new location of the record. A further problem of variable-length records arises if such a record grows to such an extent that it does not ﬁt on a page any more. For example, ﬁeld values storing image data in various formats (e.g., GIF or JPEG), movies in formats such as MPEG, or spatial objects such as polygons can extend from the order of many kilobytes to the order of many megabytes or even gigabytes. Such truly large values for records or ﬁeld values of records are called large objects (lobs) with the distinction of binary large objects (blobs) for large byte sequences and character large objects!character (clobs) for large strings. Since, in general, lobs exceed page borders, only the non-lob ﬁelds are stored on the original page. Diﬀerent data structures are conceivable for representing lobs. They all have in common that a lob is subdivided into a collection of linked pages. This organization is also called spanned , because records can span more than one page, in contrast to the unspanned organization where records are not allowed to cross page borders. The ﬁrst alternative is to keep a pointer instead of the lob on the original page as attribute value. This pointer (also called page reference) points to the start of a linked page or block list keeping the lob (Figure 60.13(a)). Insertions, deletions, and modiﬁcations are simple but direct access to pages is impossible. The second alternative is to store a lob directory as attribute value (Figure 60.13(b)). Instead of a pointer, a directory is stored which includes the lob size, further administrative data, and a page reference list pointing to the single pages or blocks on a disk. The main beneﬁt of this structure is the direct and sequential access to pages. The main drawback is the ﬁxed and limited size of the lob directory and thus the lob. A lob directory can grow so much that it needs itself a lob for its storage. The third alternative is the usage of positional B + -trees (Figure 60.14). Such a B-tree variant stores relative byte positions in its inner nodes as separators. Its leaf nodes keep the actual data pages of the lob. The original page only stores as the ﬁeld value a pointer to the root of the tree.

60.4.2

Page Organizations

Records are positioned on pages (or blocks). In order to reference a record, often a pointer to it suﬃces. Due to diﬀerent requirements for storing records, the structure of pointers can vary. The most obvious pointer type is the physical address of a record on disk or in a virtual storage and can easily be used to compute the page to be read. The main advantage

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-17

b lo c k

lo b d ir e c to r y lo b s iz e lo b

a d m in is tr a tiv e d a ta p o in te r to b lo c k 1 p o in te r to b lo c k 2 p o in te r to b lo c k 3 ... p o in te r to b lo c k k

(a )

(b )

FIGURE 60.13: A lob as a linked list of pages (a), and the use of a lob directory (b).

1 5 3 6

5 1 2

1 0 2 4

3 0 7 2

2 0 4 8

2 5 6 0

...

... 0 -5 1 1

5 1 2 -1 0 2 3

1 0 2 4 -1 5 3 5

1 5 3 6 -2 0 4 7

2 0 4 8 -2 5 5 9

2 5 6 0 -3 0 7 1

FIGURE 60.14: A lob managed by a positional B+ -tree.

is a direct access to the searched record. But it is impossible to move a record within a page, because this requires the locating and changing of all pointers to this record. We call these pointers physical pointers. Due to this drawback, a pointer is often described as a pair (p, n) where p is the number of the page where the record can be found and where n is a number indicating the location of the record on the page. The parameter n can be interpreted diﬀerently, e.g., as a relative byte address on a page, as a number of a slot, or as an index of a directory in the page header . The entry at this index position yields the relative position of the record on the page. All pointers (s, p) remain unchanged and are named page-related pointers. Pointers that are completely stable against movements in main memory can be achieved if a record is associated with a logical address that reveals nothing about its storage. The record can be moved freely in a ﬁle without changing any pointers. This can be realized by indirect addressing. If a record is moved, only the respective entry in a translation table has to be changed. All pointers remain unchanged, and we call them logical pointers. The main drawback is that each access to a record needs an additional access to the translation table. Further, the table can become so large that it does not ﬁt completely in main memory. A page can be considered as a collection of slots. Each slot can capture exactly one record. If all records have the same length, all slots have the same size and can be allocated consecutively on the page. Hence, a page contains so many records as slots ﬁt on a page plus page information like directories and pointers to other pages. A ﬁrst alternative for arranging a set of N ﬁxed-length records is to place them in the ﬁrst N slots (see Figure 60.15). If a record is deleted in slot i < N , the last record on the page in slot N is moved to the

© 2005 by Chapman & Hall/CRC

60-18

Handbook of Data Structures and Applications

free slot i. However, this causes problems if the record to be moved is pinned‡ and the slot number has to be changed. Hence, this “packed” organization is problematic, although it allows one to easily compute the location of the ith record. A second alternative is to manage deletions of records on each page and thus information about free slots by means of a directory represented as a bitmap. The retrieval of the ith record as well as ﬁnding the next free slot on a page require a traversal of the directory. The search for the next free slot can be sped up if an additional, special ﬁeld stores a pointer on the ﬁrst slot whose deletion ﬂag is set. The slot itself then contains a pointer to the next free slot so that a chaining of free slots is achieved. s lo t 1 s lo t 2 s lo t 3

s lo t 1 s lo t 2 s lo t 3

. . .

. . .

fre e s p a c e

s lo t N

N

n u m b e r o f re c o rd s p a g e h e a d e r

" p a c k e d o r g a n iz a tio n "

n u m b e r o f s lo ts

s lo t M 1 M

. . . 0

1 3

1 2

M 1

b itm a p

" u n p a c k e d o r g a n iz a tio n "

FIGURE 60.15: Alternative page organizations for ﬁxed-length records.

Also variable-length records can be positioned consecutively on a page. But deletions of records must be handled diﬀerently now because slots cannot be reused in a simple manner any more. If a new record is to be inserted, ﬁrst a free slot of “the right size” has to be found. If the slot is too large, storage is wasted. If it is too small, it cannot be used. In any case, unused storage areas (fragmentation) at the end of slots can only be avoided if records on a page are moved and condensed. This leads to a connected, free storage area. If the records of a page are unpinned, the “packed” representation for ﬁxed-length records can be adapted. Either a special terminator symbol marks the end of the record, or a ﬁeld at the beginning of the record keeps its length. In the general case, indirect addressing is needed which permits record movements without negative eﬀects and without further access costs. The most ﬂexible organization of variable-length records is provided by the tuple identiﬁer (TID) concept (Figure 60.16). Each record is assigned a unique, stable pointer consisting of a page number and an index into a page-internal directory. The entry at index i contains the relative position, i.e., the oﬀset, of slot i and hence a pointer to record i on the page. The length information of a record is stored either in the directory entry or at the beginning of the slot (Li in Figure 60.16). Records which grow or shrink can be moved on the page without being forced to modify their TIDs. If a record is deleted, this is registered in the corresponding directory entry by means of a deletion ﬂag. Since a page cannot be subdivided into predeﬁned slots, some kind of free disk space management is needed on each page. A pointer to the beginning of the free storage space on the page can be kept in the page header. If a record does not ﬁt into the currently

‡ If

pointers of unknown origin reference a record, we call the record pinned, otherwise unpinned.

© 2005 by Chapman & Hall/CRC

Data Structures for Databases P 1 2 3

1

1 2 3

2

1 2 3

60-19 P

1 2 3

L

4 5 6

L N

4 5 6

L 3

3

1

N N

. . . . . .

N 3

2

1

M n u m b e r o f d ir e c to r y e n tr ie s

. . . . . .

M 3

2

1

p o in te r to th e b e g in n in g o f th e fre e s p a c e

FIGURE 60.16: Page organization for variable-length records. available free disk space, the page is compressed (i.e., defragmented) and all records are placed consecutively without gaps. The eﬀect is that the maximally available free space is obtained and is located after the record representations. If, despite defragmentation, a record does still not ﬁt into the available free space, the record must be moved from its “home page” to an “overﬂow page”. The respective TID can be kept stable by storing a “proxy TID” instead of the record on the home page. This proxy TID points to the record having been moved to the overﬂow page. An overﬂow record is not allowed to be moved to another, second overﬂow page. If an overﬂow record has to leave its overﬂow page, its placement on the home page is attempted. If this fails due to a lack of space, a new overﬂow page is determined and the overﬂow pointer is placed on the home page. This procedure assures that each record can be retrieved with a maximum of two page accesses. If a record is deleted, we can only replace the corresponding entry in the directory by a deletion ﬂag. But we cannot compress the directory since the indexes of the directory are used to identify records. If we deleted an entry and compress, the indexes of the subsequent slots in the directory would be decremented so that TIDs would point to wrong slots and thus wrong records. If a new record is inserted, the ﬁrst entry of the directory containing a deletion ﬂag is selected for determining the new TID and pointing to the new record. If a record represents a large object, i.e., it does not ﬁt on a single page but requires a collection of linked pages, the diﬀerent data structures for blobs can be employed.

60.4.3

File Organization

A ﬁle (segment ) can be viewed as a sequence of blocks (pages). Four fundamental ﬁle organizations can be distinguished, namely ﬁles of unordered records (heap ﬁles), ﬁles of ordered records (sorted ﬁles), ﬁles with dispersed records (hash ﬁles), and tree-based ﬁles (index structures). Heap ﬁles are the simplest ﬁle organization. Records are inserted and stored in their unordered, chronological sequence. For each heap ﬁle we have to manage their assigned pages (blocks) to support scans as well as the pages containing free space to perform insertions eﬃciently. Doubly-linked lists of pages or directories of pages using both page numbers for page addressing are possible alternatives. For the ﬁrst alternative, the DBMS uses a header page which is the ﬁrst page of a heap ﬁle, contains the address of the ﬁrst data page, and information about available free space on the pages. For the second alternative, the DBMS

© 2005 by Chapman & Hall/CRC

60-20

Handbook of Data Structures and Applications

must keep the ﬁrst page of the heap ﬁle in mind. The directory itself represents a collection of pages and can be organized as a linked list. Each directory entry points to a page of the heap ﬁle. The free space on each page is recorded by a counter associated with each directory entry. If a record is to be inserted, its length can be compared to the number of free bytes on a page. Sorted ﬁles physically order their records based on the values of one (or several) of their ﬁelds, called the ordering ﬁeld (s). If the ordering ﬁeld is also a key ﬁeld of the ﬁle, i.e., a ﬁeld guaranteed to have a unique value in each record, then the ﬁeld is called the ordering key for the ﬁle. If all records have the same ﬁxed length, binary search on the ordering key can be employed resulting in faster access to records. Hash ﬁles are a ﬁle organization based on hashing and representing an important indexing technique. They provide very fast access to records on certain search conditions. Internal hashing techniques have been discussed in diﬀerent chapters of this book; here we are dealing with their external variants and will only explain their essential features. The fundamental idea of hash ﬁles is the distribution of the records of a ﬁle into so-called buckets, which are organized as heaps. The distribution is performed depending on the value of the search key. The direct assignment of a record to a bucket is computed by a hash function. Each bucket consists of one or several pages of records. A bucket directory is used for the management of the buckets, which is an array of pointers. The entry for index i points to the ﬁrst page of bucket i. All pages for bucket i are organized as a linked list. If a record has to be inserted into a bucket, this is usually done on its last page since only there space can be found. Hence, a pointer to the last page of a bucket is used to accelerate the access to this page and to avoid traversing all the pages of the bucket. If there is no space left on the last page, overﬂow pages are provided. This is called a static hash ﬁle. Unfortunately, this strategy can cause long chains of overﬂow pages. Dynamic hash ﬁles deal with this problem by allowing a variable number of buckets. Extensible hash ﬁles employ a directory structure in order to support insertion and deletion eﬃciently without the employment of overﬂow pages. Linear hash ﬁles apply an intelligent strategy to create new buckets. Insertion and deletion are eﬃciently realized without using a directory structure. Index structures are a fundamental and predominantly tree-based ﬁle organization based on the search key property of values and aiming at speeding up the access to records. They have a paramount importance in query processing. Many examples of index structures are already described in detail in this handbook, e.g., B-trees and variants, quad-trees and octtrees, R-trees and variants, and other multidimensional data structures. We will not discuss them further here. Instead, we mention some basic and general organization forms for index structures that can also be combined. An index structure is called a primary organization if it contains search key information together with an embedding of the respective records; it is named a secondary organization if it includes besides search key information only TIDs or TID lists to records in separate ﬁle structures (e.g., heap ﬁles or sorted ﬁles). An index is called a dense index if it contains (at least) one index entry for each search key value which is part of a record of the indexed ﬁle; it is named a sparse index (Figure 60.17) if it only contains an entry for each page of records of the indexed ﬁle. An index is called a clustered index (Figure 60.17) if the logical order of records is equal or almost equal to their physical order, i.e., records belonging logically together are physically stored on neighbored pages. Otherwise, the index is named non-clustered . An index is called a one-dimensional index if a linear order is deﬁned on the set of search key values used for organizing the index entries. Such an order cannot be imposed on a multi-dimensional index where the organization of index entries is based on spatial relationships. An index is called a single-level index if the index only consists of a single ﬁle; otherwise, if the index is composed of several ﬁles, it is named a multi-level index .

© 2005 by Chapman & Hall/CRC

Data Structures for Databases

60-21 e m p l. n o

e m p l. n o 0 0 1 0 0 4 0 0 6

n a m e

0 0 1 0 0 2 0 0 3

F a r m e r ie , W illia m S m ith , J a m e s J o h n s o n , B e n

0 0 4 0 0 5

F r a n k lin , J o h n M e y e r, F ra n k

0 0 6 0 0 7 0 0 8

B u s h , D o n a ld P e c k , G re g o ry J o n e s , T re v o r

FIGURE 60.17: Example of a clustered, sparse index as a secondary organization on a sorted ﬁle.

60.5

Conclusion

A modern database management system is a complex software system that leverages many sophisticated algorithms, for example, to evaluate relational operations, to provide eﬃcient access to data, to manage the buﬀer pool, and to move data between disk and main memory. In this chapter, we have shown how many of the data structures that were introduced in earlier parts of this book (e.g., B-trees, buﬀer trees, quad trees, R-trees, interval trees, hashing) including a few new ones such as histograms, LOBs, and disk pages, are being used in a real-world application. However, as we have noted in the introduction, our coverage of the data structures that are part of a DBMS is not meant to be exhaustive since a complete treatment would have easily exceeded the scope of this chapter. Furthermore, as the functionality of a DBMS must continuously grow in order to support new applications (e.g., GIS, federated databases, data mining), so does the set of data structures that must be designed to eﬃciently manage the underlying data (e.g., spatio-temporal data, XML, bio-medical data). Many of these new data structure challenges are being actively studied in the database research communities today and are likely to form a basis for tomorrow’s systems.

References [1] E. Codd. A relational model of data for large shared data banks. Communications of the ACM, 13(6):377–387, 1970. [2] Chris J. Date and Hugh Darwen. A Guide to The SQL Standard. Addison-Wesley Publishing Company, Inc., third edition, 1997. [3] Ramez Elmasri and Shamkant B. Navathe. Fundamentals of Database Systems. Addison-Wesley, fourth edition, 2003. [4] Hector Garcia-Molina, Jeﬀrey D. Ullman, and Jennifer Widom. Database Systems The Complete Book. Prentice Hall, Upper Saddle River, New Jersey, ﬁrst edition, 2002. [5] Philip M. Lewis, Arthur Bernstein, and Michael Kifer. Databases and Transaction Processing. Addison Wesley, ﬁrst edition, 2002. [6] Patrick O’Neil and Elizabeth O’Neil. Database: Principles, Programming, and Performance. Morgan Kaufmann, second edition, 2000. [7] Raghu Ramakrishnan and Johannes Gehrke. Database Management Systems. McGraw-Hill, third edition, 2003.

© 2005 by Chapman & Hall/CRC

60-22

Handbook of Data Structures and Applications

[8] Abraham Silberschatz, Henry F. Korth, and S. Sudharshan. Database System Concepts. McGraw-Hill, fourth edition, 2002.

© 2005 by Chapman & Hall/CRC

61 Data Mining 61.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61-1

Data Mining Tasks and Techniques • Challenges of Data Mining • Data Mining and the Role of Data Structures and Algorithms

61.2

Vipin Kumar University of Minnesota

Classiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61.3

Association Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hash Tree Structure

Pang-Ning Tan

61.4

Michael Steinbach

61.1

•

61-8

FP-Tree Structure

Clustering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-15 Hierarchical and Partitional Clustering • Nearest Neighbor Search and Multi-Dimensional Access Methods

Michigan State University

University of Minnesota

61-6

Nearest-Neighbor Classiﬁers • Proximity Graphs for Enhancing Nearest Neighbor Classiﬁers

61.5

Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-19

Introduction

Recent years have witnessed an explosive growth in the amounts of data collected, stored, and disseminated by various organizations. Examples include (1) the large volumes of pointof-sale data amassed at the checkout counters of grocery stores, (2) the continuous streams of satellite images produced by Earth-observing satellites, and (3) the avalanche of data logged by network monitoring software. To illustrate how much the quantity of data has grown over the years, Figure 61.1 shows an example of the number of Web pages indexed by a popular Internet search engine since 1998. In each of the domains described above, data is collected to satisfy the information needs of the various organizations: Commercial enterprises analyze point-of-sale data to learn the purchase behavior of their customers; Earth scientists use satellite image data to advance their understanding of how the Earth system is changing in response to natural and humanrelated factors; and system administrators employ network traﬃc data to detect potential network problems, including those resulting from cyber-attacks. One immediate diﬃculty encountered in these domains is how to extract useful information from massive data sets. Indeed, getting information out of the data is like drinking from a ﬁre hose. The sheer size of the data simply overwhelms our ability to manually sift through the data, hoping to ﬁnd useful information. Fueled by the need to rapidly analyze and summarize the data, researchers have turned to data mining techniques [22, 27, 29, 30, 50]. In a nutshell, data mining is the task of discovering interesting knowledge automatically from large data repositories. Interesting knowledge has diﬀerent meanings to diﬀerent people. From a business perspective, knowledge is interesting if it can be used by analysts or managers to make proﬁtable

61-1

© 2005 by Chapman & Hall/CRC

61-2

Handbook of Data Structures and Applications 9

3.5

x 10

Number of Web pages indexed by Google Search Engine

3

2.5

2

1.5

1

0.5

0

11/11/1998

8/15/2000

3/1/2001

11/25/2001

1/24/2002

2/3/2003

c FIGURE 61.1: Number of Web pages indexed by the Google search engine (Source: Internet Archive, http:www.archive.org).

business decisions. For Earth Scientists, knowledge is interesting if it reveals previously unknown information about the characteristics of the Earth system. For system administrators, knowledge is interesting if it indicates unauthorized or illegitimate use of system resources. Data mining is often considered to be an integral part of another process, called Knowledge Discovery in Databases (or KDD). KDD refers to the overall process of turning raw data into interesting knowledge and consists of a series of transformation steps, including data preprocessing, data mining, and postprocessing. The objective of data preprocessing is to convert data into the right format for subsequent analysis by selecting the appropriate data segments and extracting attributes that are relevant to the data mining task (feature selection and construction). For many practical applications, more than half of the knowledge discovery eﬀorts are devoted to data preprocessing. Postprocessing includes all additional operations performed to make the data mining results more accessible and easier to interpret. For example, the results can be sorted or ﬁltered according to various measures to remove uninteresting patterns. In addition, visualization techniques can be applied to help analysts explore data mining results.

61.1.1

Data Mining Tasks and Techniques

Data mining tasks are often divided into two major categories: Predictive The goal of predictive tasks is to use the values of some variables to predict the values of other variables. For example, in Web mining, e-tailers are interested in predicting which online users will make a purchase at their Web site. Other examples include biologists, who would like to predict the functions of proteins, and stock market analysts, who would like to forecast the future prices of various stocks.

© 2005 by Chapman & Hall/CRC

Data Mining

61-3

Descriptive The goal of descriptive tasks is to ﬁnd human-interpretable patterns that describe the underlying relationships in the data. For example, Earth Scientists are interested in discovering the primary forcings inﬂuencing observed climate patterns. In network intrusion detection, analysts want to know the kinds of cyber-attacks being launched against their networks. In document analysis, it is useful to ﬁnd groups of documents, where the documents in each group share a common topic. Data mining tasks can be accomplished using a variety of data mining techniques, as shown in Figure 61.2.

Data

Cl

us

te

rin

g

Tid Refund Marital Status

Taxable Income Cheat

1

Yes

Single

125K

No

2

No

Married

100K

No

3

No

Single

70K

No

4

Yes

Married

120K

No

5

No

Divorced 95K

Yes

6

No

Married

No

7

Yes

Divorced 220K

No

8

No

Single

85K

Yes

9

No

Married

75K

No

10

No

Single

90K

Yes

11

No

Married

60K

No

12

Yes

Divorced 220K

No

13

No

Single

85K

Yes

14

No

Married

75K

No

15

No

Single

90K

Yes

60K

ive ct ng i ed eli r P od M

10

ion g t a i n oc ini s M As le Ru

A De nom te aly cti on

Milk

FIGURE 61.2: Data mining techniques.

• Predictive modeling is used primarily for predictive data mining tasks. The input data for predictive modeling consists of two distinct types of variables: (1) explanatory variables, which deﬁne the essential properties of the data, and (2) one or more target variables, whose values are to be predicted. For the Web mining example given in the previous section, the input variables correspond to the demographic features of online users, such as age, gender, and salary, along with their browsing activities, e.g., what pages are accessed and for how long. There is one binary target variable, Buy, which has values, Yes or No,

© 2005 by Chapman & Hall/CRC

61-4

Handbook of Data Structures and Applications

indicating, respectively, whether the user will buy anything from the Web site or not. Predictive modeling techniques can be further divided into two categories: classiﬁcation and regression. Classiﬁcation techniques are used to predict the values of discrete target variables, such as the Buy variable for online users at a Web site. For example, they can be used to predict whether a customer will most likely be lost to a competitor, i.e., customer churn or attrition, and to determine the category of a star or galaxy for sky survey cataloging. Regression techniques are used to predict the values of continuous target variables, e.g., they can be applied to forecast the future price of a stock. • Association rule mining seeks to produce a set of dependence rules that predict the occurrence of a variable given the occurrences of other variables. For example, association analysis can be used to identify products that are often purchased together by suﬃciently many customers, a task that is also known as market basket analysis. Furthermore, given a database that records a sequence of events, e.g., a sequence of successive purchases by customers, an important task is that of ﬁnding dependence rules that capture the temporal connections of events. This task is known as sequential pattern analysis. • Cluster analysis ﬁnds groupings of data points so that data points that belong to one cluster are more similar to each other than to data points belonging to a diﬀerent cluster, e.g., clustering can be used to perform market segmentation of customers, document categorization, or land segmentation according to vegetation cover. While cluster analysis is often used to better understand or describe the data, it is also useful for summarizing a large data set. In this case, the objects belonging to a single cluster are replaced by a single representative object, and further data analysis is then performed using this reduced set of representative objects. • Anomaly detection identiﬁes data points that are signiﬁcantly diﬀerent than the rest of the points in the data set. Thus, anomaly detection techniques have been used to detect network intrusions and to predict fraudulent credit card transactions. Some approaches to anomaly detection are statistically based, while other are based on distance or graph-theoretic notions.

61.1.2

Challenges of Data Mining

There are several important challenges in applying data mining techniques to large data sets: Scalability Scalable techniques are needed to handle the massive size of some of the datasets that are now being created. As an example, such datasets typically require the use of eﬃcient methods for storing, indexing, and retrieving data from secondary or even tertiary storage systems. Furthermore, parallel or distributed computing approaches are often necessary if the desired data mining task is to be performed in a timely manner. While such techniques can dramatically increase the size of the datasets that can be handled, they often require the design of new algorithms and data structures. Dimensionality In some application domains, the number of dimensions (or attributes of a record) can be very large, which makes the data diﬃcult to analyze because of the ‘curse of dimensionality’ [9]. For example, in bioinformatics, the development of advanced microarray technologies allows us to analyze gene

© 2005 by Chapman & Hall/CRC

Data Mining

61-5

expression data with thousands of attributes. The dimensionality of a data mining problem may also increase substantially due to the temporal, spatial, and sequential nature of the data. Complex Data Traditional statistical methods often deal with simple data types such as continuous and categorical attributes. However, in recent years, more complicated types of structured and semi-structured data have become more important. One example of such data is graph-based data representing the linkages of web pages, social networks, or chemical structures. Another example is the free-form text that is found on most web pages. Traditional data analysis techniques often need to be modiﬁed to handle the complex nature of such data. Data Quality Many data sets have one or more problems with data quality, e.g., some values may be erroneous or inexact, or there may be missing values. As a result, even if a ‘perfect’ data mining algorithm is used to analyze the data, the information discovered may still be incorrect. Hence, there is a need for data mining techniques that can perform well when the data quality is less than perfect. Data Ownership and Distribution For a variety of reasons, e.g., privacy and ownership, some collections of data are distributed across a number of sites. In many such cases, the data cannot be centralized, and thus, the choice is either distributed data mining or no data mining. Challenges involved in developing distributed data mining solutions include the need for eﬃcient algorithms to cope with distributed and heterogeneous data sets, the need to minimize the cost of communication, and the need to accommodate data security and data ownership policies.

61.1.3

Data Mining and the Role of Data Structures and Algorithms

Research in data mining is motivated by a number of factors. In some cases, the goal is to develop an approach with greater eﬃciency. For example, a current technique may work well as long as all of the data can be held in main memory, but the size of data sets has grown to the point where this is no longer possible. In other cases, the goal may be to develop an approach that is more ﬂexible. For instance, the nature of the data may be continually changing, and it may be necessary to develop a model of the data that can also change. As an example, network traﬃc varies in volume and kind, often over relatively short time periods. In yet other cases, the task is to obtain a more accurate model of the data, i.e., one that takes into account additional factors that are common in many real world situations. The development and success of new data mining techniques is heavily dependent on the creation of the proper algorithms and data structures to address the needs such as those just described: eﬃciency, ﬂexibility, and more accurate models. (This is not to say that system or applications issues are unimportant.) Sometimes, currently existing data structures and algorithms can be directly applied, e.g., data access methods can be used to eﬃciently organize and retrieve data. However, since currently existing data structures and algorithms were typically not designed with data mining tasks in mind, it is frequently the case that some modiﬁcations, enhancements, or completely new approaches are needed, i.e., new work in data structures and algorithms is needed. We would emphasize, though, that sometimes it is the concepts and viewpoints associated with currently existing algorithms and data structures that are the most useful. Thus, the realization that a problem can be formulated as a particular type of a graph or tree may quickly lead to a solution.

© 2005 by Chapman & Hall/CRC

61-6

Handbook of Data Structures and Applications

In the following sections, we provide some examples of how data structures play an important role, both conceptually and practically, for classiﬁcation, association analysis, and clustering.

61.2

Classiﬁcation

Classiﬁcation [21, 43] is the task of assigning objects to their respective categories. For example, stock analysts are interested in classifying the stocks of publicly-owned companies as buy, hold, or sell, based on the ﬁnancial outlook of these companies. Stocks classiﬁed as buy are expected to have stronger future revenue growth than those classiﬁed as sell. In addition to the practical uses of classiﬁcation, it also helps us to understand the similarities and diﬀerences between objects that belong to diﬀerent categories. The data set in a classiﬁcation problem typically consists of a collection of records or data objects. Each record, also known as an instance or example, is characterized by a tuple (x, y), where x is the set of explanatory variables associated with the object and y is the object’s class label. A record is said to be labeled if the value of y is known; otherwise, the record is unlabeled. Each attribute xk ∈ x can be discrete or continuous. On the other hand, the class label y must be a discrete variable whose value is chosen from a ﬁnite set {y1 , y2 , · · · yc }. If y is a continuous variable, then this problem is known as regression. The classiﬁcation problem can be stated formally as follows: Classiﬁcation is the task of learning a function, f : x → y, that maps the explanatory variables x of an object to one of the class labels for y. f is known as the target function or classiﬁcation model.

61.2.1

Nearest-Neighbor Classiﬁers

Typically, the classiﬁcation framework presented involves a two-step process: (1) an inductive step for constructing classiﬁcation models from data, and (2) a deductive step for applying the derived model to previously unseen instances. For decision tree induction and rule-based learning systems, the models are constructed immediately after the training set is provided. Such techniques are known as eager learners because they intend to learn the model as soon as possible, once the training data is available. An opposite strategy would be to delay the process of generalizing the training data until it is needed to classify the unseen instances. One way to do this is to ﬁnd all training examples that are relatively similar to the attributes of the test instance. Such examples are known as the nearest neighbors of the test instance. The test instance can then be classiﬁed according to the class labels of its neighbors. This is the central idea behind the nearest-neighbor classiﬁcation scheme [4, 17, 18, 21], which is useful for classifying data sets with continuous attributes. A nearest neighbor classiﬁer represents each instance as a data point embedded in a d-dimensional space, where d is the number of continuous attributes. Given a test instance, we can compute its distance to the rest of the data objects (data points) in the training set by using an appropriate distance or similarity measure, e.g., the standard Euclidean distance measure. The k-nearest neighbors of an instance z are deﬁned as the data points having the k smallest distances to z. Figure 61.3 illustrates an example of the 1-, 2- and 3-nearest neighbors of an unknown instance, ×, located at the center of the circle. The instance can be assigned to the class label of its nearest neighbors. If the nearest neighbors contain more

© 2005 by Chapman & Hall/CRC

Data Mining

61-7

X

(a) 1-nearest neighbor

X

X

(b) 2-nearest neighbor

(c) 3-nearest neighbor

FIGURE 61.3: The 1-, 2- and 3-nearest neighbors of an instance. than one class label, then one takes a majority vote among the class labels of the nearest neighbors. The nearest data point to the unknown instance shown in Figure 61.3(a) has a negative class label. Thus, in a 1-nearest neighbor classiﬁcation scheme, the unknown instance would be assigned to a negative class. If we consider a larger number of nearest neighbors, such as three, the list of nearest neighbors would contain training examples from 2 positive classes and 1 negative class. Using the majority voting scheme, the instance would be classiﬁed as a positive class. If the number of instances from both classes are the same, as in the case of the 2-nearest neighbor classiﬁcation scheme shown in Figure 61.3(b), we could choose either one of the classes (or the default class) as the class label. A summary of the k-nearest neighbor classiﬁcation algorithm is given in Figure 61.4. Given an unlabeled instance, we need to determine its distance or similarity to all the training instances. This operation can be quite expensive and may require eﬃcient indexing techniques to reduce the amount of computation. (k: number of nearest neighbor, E: training instances, z: unlabeled instance) 1: 2: 3:

Compute the distance or similarity of z to all the training instances Let E ⊂ E be the set of k closest training instances to z Return the predicted class label for z: class ← V oting(E ). FIGURE 61.4: k−nearest neighbor classiﬁcation algorithm.

While one can take a majority vote of the nearest neighbors to select the most likely class label, this approach may not be desirable because it assumes that the inﬂuence of each nearest neighbor is the same. An alternative approach is to weight the inﬂuence of each nearest neighbor according to its distance, so that the inﬂuence is weaker if the distance is too large.

61.2.2

Proximity Graphs for Enhancing Nearest Neighbor Classiﬁers

The nearest neighbor classiﬁcation scheme, while simple, has a serious problem as currently presented: It is necessary to store all of the data points, and to compute the distance between an object to be classiﬁed and all of these stored objects. If the set of original data

© 2005 by Chapman & Hall/CRC

61-8

Handbook of Data Structures and Applications

points is large, then this can be a signiﬁcant computational burden. Hence, a considerable amount of research has been conducted into strategies to alleviate this problem. There are two general strategies for addressing the problem just discussed: Condensing The idea is that we can often eliminate many of the data points without aﬀecting classiﬁcation performance, or without aﬀecting it very much. For instance, if a data object is in the ‘middle’ of a group of other objects with the same class, then its elimination will likely have no eﬀect on the nearest neighbor classiﬁer. Editing Often, the classiﬁcation performance of a nearest neighbor classiﬁer can be enhanced by deleting certain data points. More speciﬁcally, if a given object is compared to its nearest neighbors and most of them are of another class (i.e., if the points that would be used to classify the given point are of another class), then deleting the given object will often improve classiﬁer performance. While various approaches to condensing and editing points to improve the performance of nearest neighbor classiﬁers have been proposed, there has been a considerable amount of work that approaches this problem from the viewpoint of computational geometry, especially proximity graphs [49]. Proximity graphs include nearest neighbor graphs, minimum spanning trees, relative neighborhood graphs, Gabriel graphs, and the Delaunay triangulation [35]. We can only indicate brieﬂy the usefulness of this approach, and refer the reader to [49] for an in depth discussion. First, we consider how Voronoi diagrams can be used to eliminate points that add nothing to the classiﬁcation. (The Voronoi diagram for a set of data points is the set of polygons formed by partitioning all of points in the space into a set of convex regions such that every point in a region is closer to the data point in the same region than to any other data point. Figure 61.5 shows a Voronoi diagram for a number of two-dimensional points.) Speciﬁcally, if all the Voronoi neighbors of a point, i.e., those points belonging to Voronoi regions that touch the Voronoi region of the given point, have the same class as the given data point, then discarding that point cannot aﬀect the classiﬁcation performance. The reason for this is that the Voronoi regions of the neighboring points will expand to ‘occupy’ the space once occupied by the the Voronoi region of the given point, and thus, classiﬁcation behavior is unchanged. More sophisticated approaches based on proximity graphs are possible [49]. For editing, i.e., discarding points to approve classiﬁcation performance, proximity graphs can also be useful. In particular, instead of eliminating data points whose k nearest neighbors are of a diﬀerent class, we build a proximity graph and eliminate those points where a majority of the neighbors in the proximity graph are of a diﬀerent class. Of course, the results will depend on the type of proximity graph. The Gabriel graph has been found to be the best, but for further discussion, we once again refer the reader to [49], and the extensive list of references that it contains. In summary, our goal in this section was to illustrate that—for one particular classiﬁcation scheme, nearest neighbor classiﬁcation—the rich set of data structures and algorithms of computational geometry, i.e., proximity graphs, have made a signiﬁcant contribution, both practically and theoretically.

61.3

Association Analysis

An important problem in data mining is the discovery of association patterns [1] present in large databases. This problem was originally formulated in the context of market basket data, where the goal is to determine whether the occurrence of certain items in a transaction

© 2005 by Chapman & Hall/CRC

Data Mining

61-9

0.9

0.8

0.7

z 0.6

0.5

xq

x

p

0.4

0.3

0.2 0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

FIGURE 61.5: Voronoi diagram. TID 1 2 3 4 5

Items Bread, Coke, Milk Beer, Bread Beer, Coke, Diaper, Milk Beer, Bread, Diaper, Milk Coke, Diaper, Milk

FIGURE 61.6: Market-basket transactions can be used to infer the occurrence of other items. If such interesting relationships are found, then they can be put to various proﬁtable uses such as marketing promotions, shelf management, inventory management, etc. To formalize the problem, let T = {t1 , t2 , · · · , tN } be the set of all transactions and I = {i1 , i2 , · · · , id } be the set of all items. Any subset of I is known as an itemset. The support count of an itemset C is deﬁned as the number of transactions in T that contain C, i.e., σ(C) = |{t|t ∈ T, C ⊆ t}|. An association rule is an implication of the form X −→ Y , where X and Y are itemsets and X ∩Y = ∅. The strength of an association rule is given by its support (s) and conﬁdence (c) measures. The support of the rule is deﬁned as the fraction of transactions in T that contain itemset X ∪ Y . σ(X ∪ Y ) s(X −→ Y ) = . |T | Conﬁdence, on the other hand, provides an estimate of the conditional probability of ﬁnding items of Y in transactions that contain X. c(X −→ Y ) =

σ(X ∪ Y ) σ(X)

For example, consider the market basket transactions shown in Figure 61.6. The support for the rule {Diaper, Milk} −→ {Beer} is σ(Diaper, M ilk, Beer) / 5 = 2/5 = 40%, whereas its conﬁdence is σ(Diaper, M ilk, Beer)/σ(Diaper, M ilk) = 2/3 = 66%. Support is useful because it reﬂects the signiﬁcance of a rule. Rules that have very low support are rarely observed, and thus, are more likely to occur by chance. Conﬁdence

© 2005 by Chapman & Hall/CRC

61-10

Handbook of Data Structures and Applications

is useful because it reﬂects the reliability of the inference made by each rule. Given an association rule X −→ Y , the higher the conﬁdence, the more likely it is to ﬁnd Y in transactions that contain X. Thus, the goal of association analysis is to automatically discover association rules having relatively high support and high conﬁdence. More speciﬁcally, an association rule is considered to be interesting only if its support is greater than or equal to a minimum support threshold, minsup, and its conﬁdence is greater than or equal to a minimum conﬁdence threshold, minconf . The association analysis problem is far from trivial because of the exponential number of ways in which items can be grouped together to form a rule. In addition, the rules are constrained by two completely diﬀerent conditions, stated in terms of the minsup and minconf thresholds. A standard way for generating association rules is to divide the process into two steps. The ﬁrst step is to ﬁnd all itemsets that satisfy the minimum support threshold. Such itemsets are known as frequent itemsets in the data mining literature. The second step is to generate high-conﬁdence rules only from those itemsets found to be frequent. The completeness of this two-step approach is guaranteed by the fact that any association rule X −→ Y that satisﬁes the minsup requirement can always be generated from a frequent itemset X ∪ Y . Frequent itemset generation is the computationally most expensive step because there are 2d possible ways to enumerate all itemsets from I. Much research has therefore been devoted to developing eﬃcient algorithms for this task. A key feature of these algorithms lies in their strategy for controlling the exponential complexity of enumerating candidate itemsets. Brieﬂy, the algorithms make use of the anti-monotone property of itemset support, which states that all subsets of a frequent itemset must be frequent. Put another way, if a candidate itemset is found to be infrequent, we can immediately prune the search space spanned by supersets of this itemset. The Apriori algorithm, developed by Agrawal et al. [2], pioneered the use of this property to systematically enumerate the candidate itemsets. During each iteration k, it generates only those candidate itemsets of length k whose (k − 1)-subsets are found to be frequent in the previous iteration. The support counts of these candidates are then determined by scanning the transaction database. After counting their supports, candidate k-itemsets that pass the minsup threshold are declared to be frequent. Well-designed data structures are central to the eﬃcient mining of association rules. The Apriori algorithm, for example, employs a hash-tree structure to facilitate the support counting of candidate itemsets. On the other hand, algorithms such as FP-growth [31] and H-Miner [47] employ eﬃcient data structures to provide a compact representation of the transaction database. A brief description of the hash tree and FP-tree data structures is presented next.

61.3.1

Hash Tree Structure

Apriori is a level-wise algorithm that generates frequent itemsets one level at a time, from itemsets of size-1 up to the longest frequent itemsets. At each level, candidate itemsets are generated by extending the frequent itemsets found at the previous level. Once the candidate itemsets have been enumerated, the transaction database is scanned once to determine their actual support counts. This generate-and-count procedure is repeated until no new frequent itemsets are found. Support counting of candidate itemsets is widely recognized as the key bottleneck of frequent itemset generation. This is because one has to determine the candidate itemsets contained in each transaction of the database. A naive way for doing this is to simply match each transaction against every candidate itemset. If the candidate is a subset of the transaction, its support count is incremented. This approach can be prohibitively expensive

© 2005 by Chapman & Hall/CRC

Data Mining

61-11 Hash Function 1,4,7

3,6,9 2,5,8

Transaction

1 +

2356

2 +

356

3 +

56

12356

Candidate Hash Tree

234 567 145

136

345

356

367

357

368

689 124

125

457

458

159

FIGURE 61.7: Hashing a transaction at the root node of a hash tree. if the number of candidates and number of transactions are large. In the Apriori algorithm, candidate itemsets are hashed into diﬀerent buckets and stored in a hash tree structure. During support counting, each transaction is also hashed into its appropriate buckets. This way, instead of matching a transaction against all candidate itemsets, the transaction is matched only to those candidates that belong to the same bucket. Figure 61.7 illustrates an example of a hash tree for storing candidate itemsets of size 3. Each internal node of the hash tree contains a hash function that determines which branch of the current node is to be followed next. The hash function used by the tree is also shown in this ﬁgure. Speciﬁcally, items 1, 4 and 7 are hashed to the left child of the node; items 2, 5, 8 are hashed to the middle child; and items 3, 6, 9 are hashed to the right child. Candidate itemsets are stored at the leaf nodes of the tree. The hash tree shown in Figure 61.7 contains 15 candidate itemsets, distributed across 9 leaf nodes. We now illustrate how to enumerate candidate itemsets contained in a transaction. Consider a transaction t that contains ﬁve items, {1, 2, 3, 5, 6}. There are 5 C3 = 10 distinct itemsets of size 3 contained in this transaction. Some of these itemsets may correspond to the candidate 3-itemsets under investigation, in which case, their support counts are incremented. Other subsets of t that do not correspond to any candidates can be ignored. Figure 61.8 shows a systematic way for enumerating size-3 itemsets contained in the transaction t by specifying the items one-by-one. It is assumed that items in every 3itemset are stored in increasing lexicographic order. Because of the ordering constraint, all itemsets of size-3 derived from t must begin with item 1, 2, or 3. No 3-itemset may begin with item 5 or 6 because there are only two items in this transaction that are greater than or equal to 5. This is illustrated by the level 1 structures depicted in Figure 61.8. For example, the structure 1 2 3 5 6 represents an itemset that begins with 1, followed by two

© 2005 by Chapman & Hall/CRC

61-12

Handbook of Data Structures and Applications Transaction, t 1 2 3 5 6

Level 1 1 2 3 5 6

2 3 5 6

3 5 6

Level 2 12 3 5 6

13 5 6

123 125 126

135 136

Level 3

15 6

156

23 5 6

235 236

25 6

256

35 6

356

Subsets of 3 items

FIGURE 61.8: Enumerating subsets of three items from a transaction t.

more items chosen from the set {2, 3, 5, 6}. After identifying the ﬁrst item, the structures at level 2 denote the various ways to select the second item. For example, the structure 1 2 3 5 6 corresponds to itemsets with preﬁx (1 2), followed by either item 3, 5, or 6. Once the ﬁrst two items have been chosen, the structures at level 3 represent the complete set of 3-itemsets derived from transaction t. For example, the three itemsets beginning with the preﬁx {1 2} are shown in the leftmost box at level 3 of this ﬁgure. The tree-like structure shown in Figure 61.8 is simply meant to demonstrate how subsets of a transaction can be enumerated, i.e., by specifying the items in the 3-itemsets one-byone, from its left-most item to its right-most item. For support counting, we still have to match each subset to its corresponding candidate. If there is a match, then the support count for the corresponding candidate is incremented. We now describe how a hash tree can be used to determine candidate itemsets contained in the transaction t = {1, 2, 3, 5, 6}. To do this, the hash tree must be traversed in such a way that all leaf nodes containing candidate itemsets that belong to t are visited. As previously noted, all size-3 candidate itemsets contained in t must begin with item 1, 2, or 3. Therefore, at the root node of the hash tree, we must hash on items 1, 2, and 3 separately. Item 1 is hashed to the left child of the root node; item 2 is hashed to the middle child of the root node; and item 3 is hashed to the right child of the root node. Once we reach a child of the root node, we need to hash on the second item of the level 2 structures given in Figure 61.8. For example, after hashing on item 1 at the root node, we need to hash on items 2, 3, and 5 at level 2. Hashing on items 2 or 5 will lead us to the middle child node while hashing on item 3 will lead us to the right child node, as depicted in Figure 61.9. This process of hashing on items that belong to the transaction continues until we reach the leaf nodes of the hash tree. Once a leaf node is reached, all candidate itemsets stored at the leaf are compared against the transaction. If a candidate belongs to the transaction, its support count is incremented. In this example, 6 out of the 9 leaf nodes are visited and 11 out of the 15 itemsets are matched against the transaction.

© 2005 by Chapman & Hall/CRC

Data Mining

61-13

Transaction

1 +

2356

2 +

356

3 +

56

12356

Candidate Hash Tree 1 2 +

3 5 6

1 3 +

5 6

234

1 5 +

6

567 145

136

345

356

367

357

368

689 124

125

457

458

159

FIGURE 61.9: Subset operation on the left most subtree of the root of a candidate hash tree.

61.3.2

FP-Tree Structure

Recently, an interesting algorithm called FP-growth was proposed that takes a radically diﬀerent approach to discovering frequent itemsets. The algorithm does not subscribe to the generate-and-count paradigm of Apriori. It encodes the database using a compact data structure called an FP-tree and infers frequent itemsets directly from this structure. First, the algorithm scans the database once to ﬁnd the frequent singleton items. An order is then imposed on the items based on decreasing support counts. Figure 61.10 illustrates an example of how to construct an FP-tree from a transaction database that contains ﬁve items, A, B, C, D, and E. Initially, the FP-tree contains only the root node, which is represented by a null symbol. Next, each transaction is used to create a path from the root node to some node in the FP-tree. After reading the ﬁrst transaction, {A, B}, a path is formed from the root node to its child node, labeled as A, and subsequently, to another node labeled as B. Each node in the tree contains the symbol of the item along with a count of the transactions that reach the particular node. In this case, both nodes A and B would have a count equal to one. After reading the second transaction {B,C,D} a new path extending from null → B → C → D is created. Again, the nodes along this path have support counts equal to one. When the third transaction is read, the algorithm will discover that this transaction shares a common preﬁx A with the ﬁrst transaction. As a result, the path null → A → C → D is merged to the existing path null → A → B. The support count for node A is incremented to two, while the newly-created nodes, C and D, each have a support count equal to one. This process is repeated until all the transactions have been mapped into one of the paths in the FP-tree. For example, the state of the FP-tree after reading the ﬁrst ten transactions is shown at the bottom of Figure 61.10. By looking at the way the tree is constructed, we can see why an FP-tree provides a compact representation of the database. If the database contains many transactions that share common items, then the size of an FP-tree will be considerably smaller than the size

© 2005 by Chapman & Hall/CRC

61-14

Handbook of Data Structures and Applications null

Transaction Database TID 1 2 3 4 5 6 7 8 9 10 …

null

B:1

A:1

A:1

Items {A,B} {B,C,D} {A,C,D,E} {A,D,E} {A,B,C} {A,B,C,D} {B,C} {A,B,C} {A,B,D} {B,C,E} …

C:1

B:1 B:1

D:1 After reading TID=1

After reading TID=2

null A:2

B:1

B:1

C:1

C:1

D:1

D:1 E:1 After reading TID=3

After reading TID=10: null

A:7

B:3

B:5

C:3 C:1 D:1

C:3 D:1 D:1

D:1 E:1

D:1 E:1

E:1

FIGURE 61.10: Construction of an FP-tree. of the database. The best-case scenario would be that the database contains the same set of items for all transactions. The resulting FP-tree would contain only a single branch of nodes. The worst-case scenario would be that each transaction contains a unique set of items. In this case, there is no sharing of transactions among the nodes and the size of the FP-tree is the same as the size of the database. During tree construction, the FP-tree structure also creates a linked-list access mechanism for reaching every individual occurrence of each frequent item used to construct the tree. In the above example, there are ﬁve such linked lists, one for each item, A, B, C, D, and E. The algorithm used for generating frequent itemsets from an FP-tree is known as FPgrowth. Given the FP-tree shown in Figure 61.10, the algorithm divides the problem into several subproblems, where each subproblem involves ﬁnding frequent itemsets having a particular suﬃx. In this example, the algorithm initially looks for frequent itemsets that end in E by following the linked list connecting the nodes for E. After all frequent itemsets ending in E are found, the algorithm looks for frequent itemsets that end in D by following the linked list for D, and so on. How does FP-growth ﬁnd all the frequent itemsets ending in E? Recall that an FP-tree stores the support counts of every item along each path, and that these counts reﬂect the number of transactions that are collapsed onto that particular path. In our example, there are only three occurrences of the node E. By collecting the preﬁx paths of E, we can solve the subproblem of ﬁnding frequent itemsets ending in E. The preﬁx paths of E consist of all paths starting from the root node up to the parent nodes of E. These preﬁx paths can form a new FP-tree to which the FP-growth algorithm can be recursively applied. Before creating a new FP-tree from the preﬁx paths, the support counts of items along each preﬁx path must be updated. This is because the initial preﬁx path may include several transactions that do not contain the item E. For this reason, the support count of each item along the preﬁx path must be adjusted to have the same count as node E for

© 2005 by Chapman & Hall/CRC

Data Mining

61-15

that particular path. After updating the counts along the preﬁx paths of E, some items may no longer be frequent, and thus, must be removed from further consideration (as far as our new subproblem is concerned). An FP-tree of the preﬁx paths is then constructed by removing the infrequent items. This recursive process of breaking the problem into smaller subproblems will continue until the subproblem involves only a single item. If the support count of this item is greater than the minimum support threshold, then the label of this item will be returned by the FP-growth algorithm. The returned label is appended as a preﬁx to the frequent itemset ending in E.

61.4

Clustering

Cluster analysis [6, 7, 33, 39] groups data objects based on information found in the data that describes the objects and their relationships. The goal is that the objects in a group be similar (or related) to one another and diﬀerent from (or unrelated to) the objects in other groups. The greater the similarity (or homogeneity) within a group, and the greater the diﬀerence between groups, the ‘better’ or more distinct the clustering.

61.4.1

Hierarchical and Partitional Clustering

The most commonly made distinction between clustering techniques is whether the resulting clusters are nested or unnested or, in more traditional terminology, whether a set of clusters is hierarchical or partitional. A partitional or unnested set of clusters is simply a division of the set of data objects into non-overlapping subsets (clusters) such that each data object is in exactly one subset, i.e., a partition of the data objects. The most common partitional clustering algorithm is K-means, whose operation is described by the psuedo-code in Figure 61.11. (K is a user speciﬁed parameter, i.e., the number of clusters desired, and a centroid is typically the mean or median of the points in a cluster.) Initialization: Select K points as the initial centroids. repeat 3: Form K clusters by assigning all points to the closest centroid. 4: Recompute the centroid of each cluster. 5: until The centroids do not change 1: 2:

FIGURE 61.11: Basic K-means algorithm.

A hierarchical or nested clustering is a set of nested clusters organized as a hierarchical tree, where the leaves of the tree are singleton clusters of individual data objects, and where the cluster associated with each interior node of the tree is the union of the clusters associated with its child nodes. Typically, hierarchical clustering proceeds in an agglomerative manner, i.e., starting with each point as a cluster, we repeatedly merge the closest clusters, until only one cluster remains. A wide variety of methods can be used to deﬁne the distance between two clusters, but this distance is typically deﬁned in terms of the distances between pairs of points in diﬀerent clusters. For instance, the distance between clusters may be the minimum distance between any pair of points, the maximum distance, or the average distance. The algorithm for agglomerative clustering is described by the psuedo-code in Figure 61.12.

© 2005 by Chapman & Hall/CRC

61-16

Handbook of Data Structures and Applications

Compute the pairwise distance matrix. repeat Merge the closest two clusters. 4: Update the distance matrix to reﬂect the distance between the new cluster and the original clusters. 5: until Only one cluster remains 1: 2: 3:

FIGURE 61.12: Basic agglomerative hierarchical clustering algorithm

0.2

0.6 1 0.5

0.15 0.4

5 2 3

0.3

0.2

0.1

6

4

0.05 0.1

0 0

0.1

0.2

0.3

0.4

0.5

(a) Six two-dimensional points.

0.6

0

3

6

2

5

4

1

(b) Dendrogram

FIGURE 61.13: A hierarchical clustering of six points. The tree that represents a hierarchical clustering is called a dendrogram, a term that comes from biological taxonomy. Figure 61.13 shows six points and the hierarchical clustering that is produced by the MIN clustering technique. This approach creates a hierarchical clustering by starting with the individual points as clusters, and then successively merges pairs of clusters with the minimum distance, i.e., that have the closest pair of points.

61.4.2

Nearest Neighbor Search and Multi-Dimensional Access Methods

In both the K-means and agglomerative hierarchical clustering algorithms, the time required is heavily dependent on the amount of time that it takes to ﬁnd the the distance between sets of points—step 3 in both algorithms. This is true of most other clustering schemes as well, and thus, eﬃcient implementations of clustering techniques often require considerations of nearest-neighbor search and the related area of multi-dimensional access methods. In the remainder of this section, we discuss these areas and their relevance to cluster analysis. We begin by considering a general situation. Given a set of objects or data points, including possibly complicated data such as images, text strings, DNA sequences, polygons, etc., two issues are key to eﬃciently utilizing this data: 1. How can items be located eﬃciently? While a ‘representative’ feature vector is commonly used to ‘index’ these objects, these data points will normally be very sparse in the space, and thus, it is not feasible to use an array to store the data. Also, many sets of data do not have any features that constitute a ‘key’ that would

© 2005 by Chapman & Hall/CRC

Data Mining

61-17

allow the data to be accessed using standard and eﬃcient database techniques. 2. How can similarity queries be eﬃciently conducted? Many applications, including clustering, require the nearest neighbor (or the k nearest neighbors) of a point. For instance, the clustering techniques DBSCAN [24] and Chameleon [37] will have a time complexity of O(n2 ) unless they can utilize data structures and algorithms that allow the nearest neighbors of a point to be located eﬃciently. As a non-clustering example of an application of similarity queries, a user may want to ﬁnd all the pictures similar to a particular photograph in a database of photographs. Techniques for nearest-neighbor search are often discussed in papers describing multidimensional access methods or spatial access methods, although strictly speaking the topic of multi-dimensional access methods is broader than nearest-neighbor search since it addresses all of the many diﬀerent types of queries and operations that a user might want to perform on multi-dimensional data. A large amount of work has been done in the area of nearest neighbor search and multi-dimensional access methods. Examples of such work include the kdb tree [14, 48], the R [28] tree, the R* tree [8], the SS-tree [34], the SR-tree [38], the X-tree [11], the GNAT tree [13], the M-tree [16], the TV tree [41], the hB tree [42], the “pyramid technique” [10], and the ‘hybrid’ tree [15]. A good survey of nearest-neighbor search, albeit from the slightly more general perspective of multi-dimensional access methods is given by [26]. As indicated by the prevalence of the word ‘tree’ in the preceding references, a common approach for nearest neighbor search is to create tree-based structures, such that the ‘closeness’ of the data increases as the tree is traversed from top to bottom. Thus, the nodes towards the bottom of the tree and their children can often be regarded as representing ‘clusters’ of data that are relatively cohesive. In the reverse directions, we also view clustering as being potentially useful for ﬁnding nearest neighbors. Indeed, one of the simplest techniques for generating a nearest neighbor tree is to cluster the data into a set of clusters and then, recursively break each cluster into subclusters until the subclusters consist of individual points. The resulting cluster tree tree consists of the clusters generated along the way. Regardless of how a nearest neighbor search tree is obtained, the general approach for performing a k-nearest-neighbor query is given by the algorithm in Figure 61.14. This seems fairly straightforward and, thus it seems as though nearest neighbor trees should useful for clustering data, or conversely, that clustering would be a practical way to ﬁnd nearest neighbors based on the results of clustering. However, there are some problems. Goal Mismatch One of the goals of many nearest-neighbor tree techniques is to serve as eﬃcient secondary storage based access methods for non-traditional databases, e.g., spatial databases, multimedia databases, document databases, etc. Because of requirements related to page size and eﬃcient page utilization, ‘natural’ clusters may be split across pages or nodes. Nonetheless, data is normally highly ‘clustered’ and this can be used for actual clustering as shown in [25], which uses an R* tree to improve the eﬃciency of a clustering algorithm introduced in [46]. Problems with High-dimensional Data Because of the nature of nearest-neighbor trees, the tree search involved is a branch-and-bound technique and needs to search large parts of the tree, i.e., at any particular level, many children and their descendants may need to be examined. To see this, consider a point and all points that are within a given distance of it. This hyper-sphere (or hyperrectangle in the case of multi-dimensional range queries) may very well cut across a number of nodes (clusters)—particularly if the point is on the edge of a cluster

© 2005 by Chapman & Hall/CRC

61-18 1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: 13: 14:

Handbook of Data Structures and Applications

Add the children of the root node to a search queue while the search queue is not empty do Take a node oﬀ the search queue if that node and its descendants are not ‘close enough’ to be considered for the search then Discard the subtree represented by this node else if the node is not a leaf node, i.e., a data point then Add the children of this node to a search queue else {if the node is a leaf node} add the node to a list of possible solutions end if end if end while Sort the list of possible solutions by distance from the query point and return the k-nearest neighbors FIGURE 61.14: Basic algorithm for a nearest neighbor query

and/or the query distance being considered is greater than the distance between clusters. More speciﬁcally, it is diﬃcult for the algorithms that construct nearest neighbor trees to avoid a signiﬁcant amount of overlap in the volumes represented by diﬀerent nodes in the tree. In [11], it has been shown that the degree of overlap in a frequently used nearest neighbor tree, the R* tree, approaches 100% as the dimensionality of the vectors exceeds 5. Even in two dimensions the overlap was about 40%. Other nearest neighbor search techniques suﬀer from similar problems. Furthermore, in [12] it was demonstrated that the concept of “nearest neighbor” is not meaningful in many situations, since the minimum and maximum distances of a point to its neighbors tend to be very similar in high dimensional space. Thus, unless there is signiﬁcant clustering in the data and the query ranges stay within individual clusters, the points returned by nearest neighbor queries are not much closer to the query point than are the points that are not returned. In this latter case, the nearest neighbor query is ‘unstable, to use the terminology of [12]. Recently, e.g., in [10], there has been some work on developing techniques that avoid this problem. Nonetheless, in some cases, a linear scan can be more eﬃcient at ﬁnding nearest neighbors than more sophisticated techniques. Outliers Typically, outliers are not discarded, i.e., all data points are stored. However, if some of the data points do not ﬁt into clusters particularly well, then the presence of outliers can have deleterious eﬀects on the lookups of other data points.

To summarize, there is signiﬁcant potential for developments in the areas of nearest neighbor search and multidimensional access methods to make a contribution to cluster analysis. The contribution to eﬃciency is obvious, but the notions of distance (or similarity) are central to both areas, and thus, there is also the possibility of conceptual contributions as well. However, currently, most clustering methods that utilize nearest neighbor search or multidimensional access methods are interested only in the eﬃciency aspects [5, 25, 45].

© 2005 by Chapman & Hall/CRC

Data Mining

61.5

61-19

Conclusion

In this chapter we have provided some examples to indicate the role that data structures play in data mining. For classiﬁcation, we indicated how proximity graphs can play an important role in understanding and improving the performance of nearest neighbor classiﬁers. For association analysis, we showed how data structures are currently used to address the exponential complexity of the problem. For clustering, we explored its connection to nearest neighbor search and multi-dimensional access methods—a connection that has only been modestly exploited. Data mining is a rapidly evolving ﬁeld, with new problems continually arising, and old problems being looked at in the light of new developments. These developments pose new challenges in the areas of data structures and algorithms. Some of the most promising areas in current data mining research include multi-relational data mining [20, 23, 32], mining streams of data [19], privacy preserving data mining [3], and mining data with complicated structures or behaviors, e.g., graphs [32, 40] and link analysis [36, 44].

Acknowledgment This work was partially supported by NASA grant # NCC 2 1231 and by the Army High Performance Computing Research Center under the auspices of the Department of the Army, Army Research Laboratory cooperative agreement number DAAD19-01-2-0014. The content of this work does not necessarily reﬂect the position or policy of the government and no oﬃcial endorsement should be inferred. Access to computing facilities was provided by the AHPCRC and the Minnesota Supercomputing Institute. Figures 61.1-61.11, 61.13 and some parts of the text were taken from Introduction to Data Mining by Pang-Ning Tan, MIchael Steinbach, and Vipin Kumar, published by Addison-Wesley, and are reprinted with the permission of Addison-Wesley.

References [1] R. Agrawal, T. Imielinski, and A. Swami. Mining association rules between sets of items in large databases. In Proc. ACM SIGMOD Intl. Conf. Management of Data, pages 207–216, Washington D.C., USA, 1993. [2] R. Agrawal and R. Srikant. Fast algorithms for mining association rules. In Proc. of the 20th VLDB Conference, pages 487–499, Santiago, Chile, 1994. [3] R. Agrawal and R. Srikant. Privacy-preserving data mining. In Proc. of the ACM SIGMOD Conference on Management of Data, pages 439–450. ACM Press, May 2000. [4] D. Aha. A study of instance-based algorithms for supervised learning tasks: mathematical, empirical, and psychological evaluations. PhD thesis, University of California, Irvine, 1990. [5] Alsabti, Ranka, and Singh. An eﬃcient parallel algorithm for high dimensional similarity join. In IPPS: 11th International Parallel Processing Symposium. IEEE Computer Society Press, 1998. [6] M. R. Anderberg. Cluster Analysis for Applications. Academic Press, New York, December 1973. [7] P. Arabie, L. Hubert, and G. De Soete. An overview of combinatorial data analysis. In P. Arabie, L. Hubert, and G. De Soete, editors, Clustering and Classiﬁcation, pages 188–217. World Scientiﬁc, Singapore, January 1996.

© 2005 by Chapman & Hall/CRC

61-20

Handbook of Data Structures and Applications

[8] N. Beckmann, H.-P. Kriegel, R. Schneider, and B. Seeger. The r*-tree: an eﬃcient and robust access method for points and rectangles. In Proceedings of the 1990 ACM SIGMOD international conference on Management of data, pages 322–331. ACM Press, 1990. [9] R. Bellman. Adaptive Control Processes: A Guided Tour. Princeton University Press, 1961. [10] S. Berchtold, C. B¨ ohm, and H.-P. Kriegal. The pyramid-technique: towards breaking the curse of dimensionality. In Proceedings of the 1998 ACM SIGMOD international conference on Management of data, pages 142–153. ACM Press, 1998. [11] S. Berchtold, D. A. Keim, and H.-P. Kriegel. The X-tree: An index structure for high-dimensional data. In T. M. Vijayaraman, A. P. Buchmann, C. Mohan, and N. L. Sarda, editors, Proceedings of the 22nd International Conference on Very Large Databases, pages 28–39, San Francisco, U.S.A., 1996. Morgan Kaufmann Publishers. [12] K. Beyer, J. Goldstein, R. Ramakrishnan, and U. Shaft. When is “nearest neighbor” meaningful? In Proceedings 7th International Conference on Database Theory (ICDT’99), pages 217–235, 1999. [13] S. Brin. Near neighbor search in large metric spaces. In The VLDB Journal, pages 574–584, 1995. [14] T. B. B. Yu, R. Orlandic, and J. Somavaram. KdbKD -tree: A compact kdb-tree structure for indexing multidimensional data. In Proceedings of the 2003 IEEE International Symposium on Information Technology (ITCC 2003). IEEE, April, 28-30, 2003. [15] K. Chakrabarti and S. Mehrotra. The hybrid tree: An index structure for high dimensional feature spaces. In Proceedings of the 15th International Conference on Data Engineering, 23-26 March 1999, Sydney, Austrialia, pages 440–447. IEEE Computer Society, 1999. [16] P. Ciaccia, M. Patella, and P. Zezula. M-tree: An eﬃcient access method for similarity search in metric spaces. In The VLDB Journal, pages 426–435, 1997. [17] S. Cost and S. Salzberg. A weighted nearest neighbor algorithm for learning with symbolic features. Machine Learning, 10:57–78, 1993. [18] T. M. Cover and P. E. Hart. Nearest neighbor pattern classiﬁcation. Knowledge Based Systems, 8(6):373–389, 1995. [19] P. Domingos and G. Hulten. A general framework for mining massive data streams. Journal of Computational and Graphical Statistics, 12, 2003. [20] P. Domingos. Prospects and challenges for multirelational data mining. SIGKDD Explorations, 5(1), July 2003. [21] R. O. Duda, P. E. Hart, and D. G. Stork. Pattern Classiﬁcation. John Wiley & Sons, Inc., New York, second edition, 2001. [22] M. H. Dunham. Data Mining: Introductory and Advanced Topics. Prentice Hall, 2002. [23] S. Dzeroski and L. D. Raedt. Multi-relational data mining: The current frontiers. SIGKDD Explorations, 5(1), July 2003. [24] M. Ester, H.-P. Kriegel, J. Sander, and X. Xu. A density-based algorithm for discovering clusters in large spatial databases with noise. In KDD96, pages 226–231, 1996. [25] M. Ester, H.-P. Kriegel, and X. Xu. Knowledge discovery in large spatial databases: focusing techniques for eﬃcient class identiﬁcation. In M. Egenhofer and J. Herring, editors, Advances in Spatial Databases, 4th International Symposium, SSD’95, volume 951, pages 67–82, Portland, ME, 1995. Springer. [26] V. Gaede and O. G¨ unther. Multidimensional access methods. ACM Computing

© 2005 by Chapman & Hall/CRC

Data Mining

61-21

Surveys (CSUR), 30(2):170–231, 1998. [27] R. L. Grossman, C. Kamath, V. K. Philip Kegelmeyer, and R. R. Namburu, editors. Data Mining for Scientiﬁc and Engineering Applications. Kluwer Academic Publishers, October 2001. [28] A. Guttman. R-trees: a dynamic index structure for spatial searching. In Proceedings of the 1984 ACM SIGMOD international conference on Management of data, pages 47–57. ACM Press, 1984. [29] D. Hand, H. Mannila, and P. Smyth. Principles of Data Mining. MIT Press, 2001. [30] J. Han and M. Kamber. Data Mining: Concepts and Techniques. Morgan Kaufmann Publishers, San Francisco, 2001. [31] J. Han, J. Pei, and Y. Yin. Mining frequent patterns without candidate generation. In Proc. 2000 ACM-SIGMOD Int’l Conf on Management of Data (SIGMOD’00), Dallas, TX, May 2000. [32] L. B. Holder and D. J. Cook. Graph-based relational learning: Current and future directions. SIGKDD Explorations, 5(1), July 2003. [33] A. K. Jain and R. C. Dubes. Algorithms for Clustering Data. Prentice Hall Advanced Reference Series. Prentice Hall, Englewood Cliﬀs, New Jersey, March 1988. [34] R. Jain and D. A. White. Similarity indexing with the ss-tree. In Proceedings of the 12th International Conference on Data Engineering, pages 516–523, 1996. [35] J. W. Jaromczyk and G. T. Toussaint. Relative neighborhood graphs and their relatives. Proceedings of the IEEE, 80(9):1502–1517, September 1992. [36] D. Jensen and J. Neville. Data mining in social networks. In National Academy of Sciences Symposium on Dynamic Social Network Analysis, 2002. [37] G. Karypis, E.-H. Han, , and V. Kumar. Chameleon: Hierarchical clustering using dynamic modeling. Computer, 32(8):68–75, 1999. [38] N. Katayama and S. Satoh. The sr-tree: an index structure for high-dimensional nearest neighbor queries. In Proceedings of the 1997 ACM SIGMOD international conference on Management of data, pages 369–380. ACM Press, 1997. [39] L. Kaufman and P. J. Rousseeuw. Finding Groups in Data: An Introduction to Cluster Analysis. Wiley Series in Probability and Statistics. John Wiley and Sons, New York, November 1990. [40] M. Kuramochi and G. Karypis. Frequent subgraph discovery. In The 2001 IEEE International Conference on Data Mining, pages 313–320, 2001. [41] K.-I. Lin, H. V. Jagadish, and C. Faloutsos. The tv-tree: An index structure for high-dimensional data. VLDB Journal, 3(4):517–542, 1994. [42] D. B. Lomet and B. Salzberg. The hb-tree: a multiattribute indexing method with good guaranteed performance. ACM Transactions on Database Systems (TODS), 15(4):625–658, 1990. [43] T. M. Mitchell. Machine Learning. McGraw-Hill, March 1997. [44] D. Mladenic, M. Grobelnik, N. Milic-Frayling, S. Donoho, and T. D. (editors). Kdd 2003: Workshop on link analysis for detecting complex behavior, August 2003. [45] F. Murtagh. Clustering in massive data sets. In J. Abello, P. M. Pardalos, and M. G. C. Resende, editors, Handbook of Massive Data Sets, pages 501–543. Kluwer Academic Publishers, Dordrecht, Netherlands, May 2002. [46] R. T. Ng and J. Han. Eﬃcient and eﬀective clustering methods for spatial data mining. In J. Bocca, M. Jarke, and C. Zaniolo, editors, 20th International Conference on Very Large Data Bases, September 12–15, 1994, Santiago, Chile proceedings, pages 144– 155, Los Altos, CA 94022, USA, 1994. Morgan Kaufmann Publishers. [47] J. Pei, J. Han, H. Lu, S. Nishio, S. Tang, and D. Yang. H-mine: Hyperstructure mining of frequent patterns in large databases. In Proc. 2001 Int’l Conf on Data Mining

© 2005 by Chapman & Hall/CRC

61-22

Handbook of Data Structures and Applications

(ICDM’01), San Jose, CA, Nov 2001. [48] J. T. Robinson. The k-d-b-tree: a search structure for large multidimensional dynamic indexes. In Proceedings of the 1981 ACM SIGMOD international conference on Management of data, pages 10–18. ACM Press, 1981. [49] G. T. Toussaint. Proximity graphs for nearest neighbor decision rules: recent progress. In Interface-2002, 34th Symposium on Computing and Statistics, Montreal, Canada, April 17-20 2002. [50] I. H. Witten and E. Frank. Data Mining: Practical Machine Learning Tools and Techniques with Java Implementations. Morgan Kaufmann, 1999.

© 2005 by Chapman & Hall/CRC

62 Computational Geometry: Fundamental Structures 62.1 62.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Substructures and Complexity Duality

62.3 62.4 62.5

Bettina Speckmann Technical University, Eindhoven

62.1

•

•

Construction

•

62-7

Dynamic Convex Hulls

Voronoi Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-11 Complexity

Technical University, Eindhoven

Decomposition

Convex Hulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Complexity

Mark de Berg

•

62-1 62-2

•

Construction

•

Variations

Triangulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-14 Delaunay Triangulation Pseudo-Triangulations

•

Polygons

•

Polyhedra

•

Introduction

Computational geometry deals with the design and analysis of algorithms and data structures for problems involving spatial data. The questions that are studied range from basic problems such as line-segment intersection (“Compute all intersection points in a given set of line segments in the plane.”) to quite involved problems such as motion-planning (“Compute a collision-free path for a robot in workspace from a given start position to a given goal position.”) Because spatial data plays an important role in many areas within and outside of computer science—CAD/CAM, computer graphics and virtual reality, and geography are just a few examples—computational geometry has a broad range of applications. Computational geometry emerged from the general algorithms area in the late 1970s. It experienced a rapid growth in the 1980s and by now is a recognized discipline with its own conferences and journals and many researchers working in the area. It is a beautiful ﬁeld with connections to other areas of algorithms research, to application areas like the ones mentioned earlier, and to areas of mathematics such as combinatorial geometry. To design an eﬃcient geometric algorithm or data structure, one usually needs two ingredients: a toolbox of algorithmic techniques and geometric data structures and a thorough understanding of the geometric properties of the problem at hand. As an example, consider the classic post-oﬃce problem, where we want to preprocess a set S of n points in the plane—the points in S are usually called sites—for the following queries: report the site in S that is closest to a query point q. A possible approach is to subdivide the plane into n regions, one for each site, such that the region of a site s ∈ S consists of exactly those points q ∈ R2 for which s is the closest site. This subdivision is called the Voronoi 62-1

© 2005 by Chapman & Hall/CRC

62-2

Handbook of Data Structures and Applications

diagram of S. A query with a point q can now be answered by locating the region in which q lies, and reporting the site deﬁning that region. To make this idea work, one needs an eﬃcient data structure for point location. But one also needs to understand the geometry: What does the Voronoi diagram look like? What is its complexity? How can we construct it eﬃciently? In Part IV, many data structures for spatial data were already discussed. Hence, in this chapter we will focus on the second ingredient: we will discuss a number of basic geometric concepts. In particular, we will discuss arrangements in Section 62.2, convex hulls in Section 62.3, Voronoi diagrams in Section 62.4, and triangulations in Section 62.5. More information on computational geometry can be found in various sources: there are several general textbooks on computational geometry [7, 8, 45, 49], as well as more specialized books e.g. on arrangements [20, 53] and Voronoi diagrams [44]. Finally, there are two handbooks that are devoted solely to (discrete and) computational geometry [24, 50].

62.2

Arrangements

The arrangement A(S) deﬁned by a ﬁnite collection S of curves in the plane is the subdivision of the plane into open cells of dimensions 2 (the faces), 1 (the edges), and 0 (the vertices), induced by S—see Fig. 62.1 for an example. This deﬁnition generalizes readily to

vertex

edge face

FIGURE 62.1: An arrangement of curves in the plane. higher dimensions: the arrangement deﬁned by a set S of geometric objects in Rd such as hyperplanes or surfaces, is the decomposition of Rd into open cells of dimensions 0, . . . , d induced by S. The cells of dimension k are usually called k-cells. The 0-cells are called vertices, the 1-cells are called edges, the 2-cells are called faces, the (d − 1)-cells are called facets, and the d-cells are sometimes just called cells. Arrangements have turned out to form a fundamental concept underlying many geometric problems and the eﬃciency of geometric algorithms is often closely related to the combinatorial complexity of (certain parts of) some arrangement. Moreover, to solve a certain problem geometric algorithms often rely on some decomposition of the arrangement underlying the problem. Hence, the following subsections give some more information on the complexity and the decomposition of arrangements.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

d=2

d=3

d>3

lines segments circles Jordan arcs planes triangles spheres surfaces hyperplanes (d − 1)-simplices (d − 1)-spheres surfaces

62-3

single cell

upper envelope

reference

Θ(n) Θ(nα(n)) Θ(n) Θ(λs+2 (n)) Θ(n) Ω(n2 α(n)), O(n2 log n) Θ(n2 ) Ω(nλq (n)), O(n2+ε ) Θ(nd/2 ) Ω(nd−1 α(n)), O(nd−1 log n) Θ(nd/2 ) Ω(nd−2 λq (n)), O(nd−1+ε )

Θ(n) Θ(nα(n)) Θ(n) Θ(λs+2 (n)) Θ(n) Θ(n2 α(n)) Θ(n2 ) Ω(nλq (n)), O(n2+ε ) Θ(nd/2 ) Θ(nd−1 α(n)) Θ(nd/2 ) O(nd−1+ε )

trivial [48] linearization [28] Euler’s formula [56], [21] linearization [30] Upper Bound Thm [37] [56], [21] linearization [6], [54]

TABLE 62.1 Maximum complexity of single cells and envelopes in arrangements. The parameter s is the maximum number of points in which any two curves meet; the parameter q is a similar parameter for higher dimensional surfaces. The function λt (n) is the maximum length of a Davenport-Schinzel sequence [53] of order t on n symbols, and is only slightly super-linear for any constant t. Bounds of the form O(nd−1+ε ) hold for any constant ε > 0.

62.2.1

Substructures and Complexity

Let H be a collection of n hyperplanes in Rd . As stated earlier, the arrangement A(H) is the decomposition of Rd into open cells of dimensions 0, . . . , d induced by H. The combinatorial complexity of A(H) is deﬁned to be the total number of cells of the various dimensions. This deﬁnition immediately carries over to arrangements induced by other objects, such as segments in the plane, or surfaces in Rd . For example, the complexity of the arrangement in Fig. 62.1 is 58, since it consists of 27 vertices, 27 edges, and 4 faces (one of which is the unbounded face). It is easy to see that the maximum complexity of an arrangement of n lines in the plane is Θ(n2 ): there can be at most n(n − 1)/2 vertices, at most n2 edges, and at most n2 /2 + n/2 + 1 faces. Also for an arrangement of curves the maximum complexity is Θ(n2 ), provided that any pair of curves intersects at most s times, for a constant s. More generally, the maximum complexity of an arrangement of n hyperplanes in Rd is Θ(nd ). The same bound holds for well-behaved surfaces (such as algebraic surfaces of constant maximum degree) or well-behaved surface patches in Rd . Single cells. It becomes more challenging to bound the complexity when we consider only a part of an arrangement. For example, what is the maximum complexity of a single cell, that is, the maximum number of i-cells, for i < d, on the boundary of any given d-cell? For lines in the plane this is still rather easy—the maximum complexity is Θ(n), since any line can contribute at most one edge to a given face—but the question is already quite hard for arrangements of line segments in the plane. Here it turns out that the maximum complexity can be Θ(nα(n)), where α(n) is the extremely slowly growing functional inverse of Ackermann’s function. More generally, for Jordan curves where each pair intersects in at most s points, the maximum complexity is Θ(λs+2 (n)), where λs+2 (n) is the maximum length of a Davenport-Schinzel sequence of order s+2 on n symbols. The function λs+2 (n) is only slightly super-linear for any constant s. In higher dimensions, tight bounds are known for hyperplanes: the famous Upper Bound Theorem states that the maximum complexity of a single cell is Θ(nd/2 ). For most other objects, the known upper and lower bounds are close but not tight—see Table 62.1. Lower envelopes. Another important substructure is the lower envelope. Intuitively, the

© 2005 by Chapman & Hall/CRC

62-4

Handbook of Data Structures and Applications

FIGURE 62.2: The lower envelope of a set of segments in the plane. lower envelope of a set of segments in the plane is what one would see when looking at the segments from below—see Fig. 62.2. More formally, if we view the segments as graphs of partially deﬁned (linear) functions, then the lower envelope is the point-wise minimum of these functions. Similarly, the upper envelope is deﬁned as the point-wise maximum of the functions. The deﬁnition readily extends to x-monotone curves in the plane, to planes, triangles, or xy-monotone surface patches in R3 , etc. Envelopes are closely related to single cells. The lower envelope of a set of lines in the plane, for instance, is the boundary of the single cell in the arrangement that is below all the lines. The vertices of the lower envelope of a set of segments in the plane are also vertices of the unbounded cell deﬁned by those segments, but here the reverse is not true: vertices of the unbounded cell that are above other segments are not on the lower envelope. Nevertheless, the worst-case complexities of lower envelopes and single cells are usually very similar—see Table 62.1. Other substructures. More types of substructures have been studied than single cells and envelopes: zones, levels, multiple cells, etc. The interested reader may consult the Chapter 21 of the CRC Handbook of Discrete and Computational Geometry [24], or the books by Edelsbrunner [20] or Sharir and Agarwal [53].

62.2.2

Decomposition

Full arrangements, or substructures in arrangements, are by themselves not convenient to work with, because their cells can be quite complex. Thus it is useful to further decompose the cells of interest into constant-complexity subcells: triangles or trapezoids in 2D, and simplices or trapezoid-like cells in higher dimensions. There are several ways of doing this. Bottom-vertex triangulations. For arrangements of hyperplanes, the so-called bottomvertex triangulation is often used. This decomposition is obtained as follows. Consider a bounded face f in a planar arrangement of lines. We can decompose f into triangles by drawing a line segment from the bottommost vertex v of f to all other vertices of f , except the vertices that are already adjacent to v—see Fig. 62.3(a). Note that this easy method for triangulating f is applicable since f is always convex. To decompose the whole arrangement of lines (or some substructure in it) we simply decompose each face in this manner.∗ To decompose a d-cell C in a higher-dimensional arrangement of hyperplanes, we proceed inductively as follows. We ﬁrst decompose each (d − 1)-cell on the boundary of C, and then extend each (d − 1)-simplex in this boundary decomposition into a d-simplex by connecting

∗ Unbounded

faces require a bit of care, but they can be handled in a similar way.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

62-5 (b)

(a)

v

FIGURE 62.3: (a) The bottom-vertex triangulation of a face in a planar arrangement. (b) The vertical decomposition of a planar arrangement of line segments. each of its vertices to the bottommost vertex of C. Again, this can readily be used to decompose any subset of cells in an arrangement of hyperplanes. The total number of simplices in a bottom-vertex decomposition is linear in the total complexity of the cells being decomposed. Vertical decompositions. The bottom-vertex triangulation requires the cells to be convex, so it does not work for arrangements of segments or for arrangements of surfaces. For such arrangements one often uses the vertical decomposition (or: trapezoidal decomposition). For an arrangement of line segments or curves in the plane, this decomposition is deﬁned as follows. Each vertex of the arrangement—this can be a segment endpoint or an intersection point—has a vertical connection to the segment immediately above it, and to the segment immediately below it. If there is no segment below or above a vertex, then the connection extends to inﬁnity. This decomposes each cell into trapezoids: subcells that are bounded by at most two vertical connections and by at most two segments—see Fig. 62.3(b). This deﬁnition can be generalized to higher dimensions as follows. Suppose we wish to decompose the arrangement A(S) induced by a collection S of surfaces in Rd , where each surface is vertically monotone (that is, any line parallel to the xd -axis intersects the surface in at most one point). Each point of any (d − 2)-dimensional cell of A(S) is connected by a vertical segment to the surface immediately above it and to the surface immediately below it. In other words, from each (d − 2)-cell we extend a vertical wall upward and downward. These walls together decompose the cells into subcells bounded by vertical walls and by at most two surfaces from S—one from above and one from below. These subcells are vertically monotone, but do not yet have constant complexity. Hence, we recursively decompose the bottom of the cell, and then extend this decomposition vertically upward to obtain a decomposition of the entire cell. The vertical decomposition can be used for most arrangements (or substructures in them). In the plane, the maximum complexity of the vertical decomposition is linear in the total complexity of the decomposed cells. However, in higher dimensions this is no longer true. In R3 , for instance, the vertical decomposition of an arrangement of n disjoint triangles can consist of Θ(n2 ) subcells, even though in this case the total complexity of the arrangement in obviously linear. Unfortunately, this is unavoidable, as there are collections of disjoint triangles in R3 for which any decomposition into convex subcells must have Ω(n2 ) subcells. For n intersecting triangles, the vertical decomposition has complexity O(n2 α(n) log n+K), where K is the complexity of the arrangement of triangles [56]. More information about the complexity of vertical decompositions in various settings can be found in Halperin’s survey on arrangements [24, Chapter 21]. In many cases, vertical decompositions can be constructed in time proportional to their complexity, with perhaps a small (logarithmic or

© 2005 by Chapman & Hall/CRC

62-6

Handbook of Data Structures and Applications

O(nε )) multiplicative factor.

62.2.3

Duality

Consider the transformation in the plane that maps the point p = (px , py ) to the line p∗ : y = px x−py , and the line : y = ax+b to the point ∗ = (a, −b). Such a transformation that maps points to lines and vice versa is called a duality transform. Often the term primal plane is used for the plane in which the original objects live, and the term dual plane is used for the plane in which their images live. The duality transform deﬁned above has a few easy-to-verify properties: (i) It is incidence preserving: if a point p lies on a line , then the point ∗ dual to lies on the line p∗ dual to p. (ii) It is order preserving: if a point p lies above a line , then ∗ lies above p∗ . These properties imply several others. For example, three points on a line become three lines through a point under the duality transform—see Fig. 62.4. Another property is that for any point p we have (p∗ )∗ = p. Notice that the duality transform above is not deﬁned for vertical lines. This technicality is usually not a problem, as vertical lines can often be handled separately. primal plane

dual plane

y

p∗4

p3

p4

p∗1

y

p2

∗ x

x

p1 p∗2

p∗3

FIGURE 62.4: Illustration of the duality transform.

This duality transform is so simple that it does not seem very interesting at ﬁrst sight. However, it turns out to be extremely useful. As an example, consider the following problem. We are given a set P of n points in the plane, which we wish to preprocess for strip-emptiness queries: given a query strip—a strip is the region between two parallel lines— decide whether that strip is empty or if it contains one or more points from P . If we know about duality, and we know about data structures for point location, then this problem is easy to solve: we take the duals of the points in P to obtain a set P ∗ of lines in the plane, and we preprocess the arrangement A(P ∗ ) induced by P ∗ for logarithmic-time point location. To decide whether the strip bounded by lines 1 and 2 is empty, we perform point locations with ∗1 and ∗2 in A(P ∗ ); the strip is empty if and only if ∗1 and ∗2 lie in the same face

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

62-7

of the arrangement. (This does not work if 1 and 2 are vertical, since then their duals are undeﬁned. But for this case we can simply build one extra data structure, which is a balanced binary search tree on the x-coordinates of the points.) In principle, of course, we could also have arrived at this solution without using duality. After all, duality does not add any new information: it is just a diﬀerent way of looking at things. Hence, every algorithm or data structure that works in the dual plane can also be interpreted as working in the primal plane. But some things are simply more easy to see in the dual plane. For example, a face in the arrangement A(P ∗ ) in the dual plane is much more visible than the collection of all lines in the primal plane dividing P into two subsets in a certain way. So without duality, we would not have realized that we could solve the strip-emptiness problem with a known data structure, and we would probably not have been able to develop that structure ourselves either. This is just one example of the use of duality. There are many more problems where duality is quite useful. In fact, we will see another example in the next section, when we study convex hulls.

62.3

Convex Hulls

A set A ⊂ Rd is convex if for any two points p, q ∈ A the segment pq is completely contained in A. The convex hull of a set S of objects is the smallest convex set that contains all objects in S, that is, the most tightly ﬁtting convex bounding volume for S. For example, if S is a set of objects in the plane, we can obtain the convex hull by taking a large rubber band around the objects and then releasing the band; the band will snap around the objects and the resulting shape is the convex hull. More formally, we can deﬁne CH(S) as the intersection of all convex sets containing all objects in S: CH(S) :=

{A : A is convex, and o ⊂ A for all o ∈ S }.

We denote the convex hull of the objects in S by CH(S). It is easy to see that the convex hull of a set of line segments in the plane is the same as the convex hull of the endpoints of the segments. More generally, the convex hull of a set of bounded polygonal objects in Rd is the same as the convex hull of the vertices of the objects. Therefore we will restrict our discussion to convex hulls of sets of points. Table 62.2 gives an overview of the results on the complexity and construction of convex hulls discussed below.

d d d d

= = > ≥

2, 3, 3, 2,

worst case worst case worst case uniform distr.

complexity

construction

reference

Θ(n) Θ(n) Θ(nd/2 ) Θ(logd−1 n)

O(n log n) O(n log n) O(nd/2 ) O(n)

[7, 26] [17, 39, 43, 51] [14, 17, 39, 51] [18]

TABLE 62.2 Maximum complexity of the convex hull of a set of n points, and the time needed to construct the convex hull. The bounds on uniform distribution refer to points drawn uniformly at random from a hypercube or some other convex polytope.

© 2005 by Chapman & Hall/CRC

62-8

62.3.1

Handbook of Data Structures and Applications

Complexity

Let P be a set of n points in Rd . The convex hull of P , denoted by CH(P ), is a convex polytope whose vertices are a subset of the points in P . The complexity of a polytope is deﬁned as the total number of k-facets† (that is, k-dimensional features) on the boundary of the polytope, for k = 0, 1, . . . , d − 1: the complexity of a planar polygon is the total number of vertices and edges, the complexity of a 3-dimensional polytope is the total number of vertices, edges, and faces, and so on. Because the vertices of CH(P ) are a subset of the points in P , the number of vertices of CH(P ) is at most n. In the plane this means that the total complexity of the convex hull is O(n), because the number of edges of a planar polygon is equal to the number of vertices. In higher dimensions this is no longer true: the number of k-facets (k > 0) of a polytope can be larger than the number of vertices. How large can this number be in the worst case? In R3 , the total complexity is still O(n). This follows from Euler’s formula, which states that for a convex polytope in R3 with V vertices, E edges, and F faces it holds that V − E + F = 2. In higher dimensions, the complexity can be signiﬁcantly higher: the worst-case complexity of a convex polytope with n vertices in Rd is Θ(nd/2 ). In fact, the bound on the complexity of the convex hull immediately follows from the results of the previous section if we apply duality. To see this, consider a set P of n points in the plane. For simplicity, let us suppose that CH(P ) does not have any vertical edges and that no three points in P are collinear. Deﬁne the upper hull of P , denoted by UH(P ), as the set of edges of CH(P ) that bound CH(P ) from above. Let P ∗ be the set of lines that are the duals of the points in P . A pair p, q ∈ P deﬁnes an edge of UH(P ) if and only if all other points r ∈ P lie below the line through p and q. In the dual this means that all lines r∗ ∈ P ∗ lie above the intersection point p∗ ∩ q ∗ . In other words, p∗ ∩ q ∗ is a vertex on the lower envelope LE(P ∗ ) of the lines in P ∗ . Furthermore, a point p ∈ P is a vertex of UH(P ) if and only if its dual p∗ deﬁnes an edge of LE(P ∗ ). Thus there is a one-to-one correspondence between the vertices (or, edges) of UH(P ), and the edges (or, vertices) of LE(P ∗ ). In higher dimensions a similar statement is true: there is a one-to-one correspondence between the k-facets of the upper hull of P and the (d − k − 1)-facets of the lower envelope of P ∗ . The bound on the complexity of the convex hull of a set of n points in Rd therefore follows from the Θ(nd/2 ) bound on the complexity of the lower envelope of a set of n hyperplanes Rd . The Θ(nd/2 ) bound implies that the complexity of the convex hull can be quite high when the dimension gets large. Fortunately this is not the case if the points in P are distributed uniformly: in that case only few of the points in P are expected to show up as a vertex on the convex hull. More precisely, the expected complexity of the convex hull of a set P that is uniformly distributed in the unit hypercube is O(logd−1 n) [18, 19].

62.3.2

Construction

We now turn our attention to algorithms for computing the convex hull of a set P of n points in Rd . In the previous subsection we have shown that there is a correspondence between the upper hull of P and the lower envelope of P ∗ , where P ∗ is the set of hyperplanes dual to the points in P . It follows that any algorithm that can compute the convex hull of a set

† In the previous section we used the term k-cells for the k-dimensional features in an arrangement, but since we are dealing here with a single polytope we prefer the term k-facet.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

62-9

pi

points disappearing from the upper hull

FIGURE 62.5: Constructing the upper hull. of points in Rd can also be used to compute the intersection of a set of half-spaces in Rd , and vice versa. First consider the planar case. By a reduction from sorting, one can show that Ω(n log n) is a lower bound on the worst-case running time of any convex-hull algorithm. There are many diﬀerent algorithms that achieve O(n log n) running time and are thus optimal in the worst case. One of the best known algorithms is called Graham’s scan [7, 26]. It treats the points from left to right, and maintains the upper hull of all the points encountered so far. To handle a point pi , it is ﬁrst added to the end of the current upper hull. The next step is to delete the points that should no longer be part of the hull. They always form a consecutive portion at the right end of the old hull, and can be identiﬁed easily—see Fig. 62.5. After these points have been deleted, the next point is handled. Graham’s scan runs in linear time, after the points have been sorted from left to right. This is optimal in the worst case. The Ω(n log n) lower bound does not hold if only few points show up on the convex hull. Indeed, in this case it is possible to do better: Kirkpatrick and Seidel [34], and later Chan [10], gave output-sensitive algorithms that compute the convex hull in O(n log k) time, where k is the number of vertices of the hull. In R3 , the worst-case complexity of the convex hull is still linear, and it can be computed in O(n log n) time, either by a deterministic divide-and-conquer algorithm [43] or by a simpler randomized algorithm [17, 39, 51]. In dimensions d > 3, the convex hull can be computed in Θ(nd/2 ) time [14]. This is the same as the worst-case complexity of the hull, and therefore optimal. Again, the simplest algorithms that achieve this bound are randomized [17, 39, 51]. There is also an output-sensitive algorithm by Chan [10], which computes the convex hull in O(n log k + (nk)1−1/(d/2+1) logO(1) n) time, where k is its complexity. As remarked earlier, the expected complexity of the convex hull of a set of n uniformly distributed points is much smaller than the worst-case complexity. This means that if we use an output-sensitive algorithm to compute the convex hull, its expected running time will be better than its worst-case running time. One can do even better, however, by using specialized algorithms. For example, Dwyer [18] has shown that the convex hull of points distributed uniformly in e.g. the unit hypercube can be computed in linear expected time.

© 2005 by Chapman & Hall/CRC

62-10

62.3.3

Handbook of Data Structures and Applications

Dynamic Convex Hulls

In some applications the set P changes over time: new points are inserted into P , and some existing points are deleted. The convex hull can change drastically after an update: the insertion of a single point can cause Θ(n) points to disappear from the convex hull, and the deletion of a single point can cause Θ(n) points to appear on the convex hull. Surprisingly, it is nevertheless possible to store the convex hull of a planar point set in such a way that any update can be processed in O(log2 n) in the worst case, as shown by Overmars and van Leeuwen [47]. The key to their result is to not only store the convex hull of the whole set, but also information about the convex hull of certain subsets. The structure of Overmars and van Leeuwen roughly works as follows. Suppose we wish to maintain UH(P ), the upper hull of P ; maintenance of the lower hull can be done similarly. The structure to maintain UH(P ) is a balanced binary tree T , whose leaves store the points from P sorted by xcoordinate. The idea is that each internal node ν stores the upper hull of all the points in the subtree rooted at ν. Instead of storing the complete upper hull at each node ν, however, we only store those parts that are not already on the upper hull of nodes higher up in the tree. In other words, the point corresponding to a leaf µ is stored at the highest ancestor of µ where it is on the upper hull—see Fig. 62.6 for an illustration.

root(T )

FIGURE 62.6: The Overmars-van Leeuwen structure to maintain the convex hull.

Note that the root still stores the upper hull of the entire set P . Because a point is stored in only one upper hull, the structure uses O(n) storage. Overmars and van Leeuwen show how to update the structure in O(log2 n) time in the worst case. Although the result by Overmars and van Leeuwen is more than 20 years old by now, it still has not been improved in its full generality. Nevertheless, there have been several advances in special cases. For example, for the semi-dynamic case (only insertions, or only deletions), there are structures with O(log n) update time [30, 42]. Furthermore, O(log n) update time can be achieved in the oﬀ-line setting, where the sequence of insertions and deletions is known in advance [32]. Improvements are also possible if one does not need to maintain the convex hull explicitly. For example, in some applications the reason for maintaining the convex hull is to be able to ﬁnd the point that is extreme in a query direction, or the intersection of the convex hull with a query line. Such queries can be answered in logarithmic time if the convex hull vertices are stored in order in a balanced binary tree, but it is not necessary to know all the convex hull vertices explicitly to answer such queries.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

62-11

This observation was used by Chan [11], who described a fully dynamic structure that can answer such queries in O(log n) time and that can be updated in O(log1+ε n) time. This result was recently improved by Brodal and Jacob [9], who announced a structure that uses O(n) storage, has O(log n) update time, and can answer queries in O(log n) time. Neither Chan’s structure nor the structure of Brodal and Jakob, however, can report the convex hull in time linear in its complexity, and the update times are amortized.

62.4

Voronoi Diagrams

Recall the post-oﬃce problem mentioned in the introduction. Here we want to preprocess a set S of n points, referred to as sites, in the plane such that we can answer the query: which site in S is closest to a given query point q? In order to solve this problem we can divide the plane into regions according to the nearest-neighbor rule: each site s gets assigned the region which is closest to s. This subdivision, which compactly captures the distance information inherent in a given conﬁguration, is called the Voronoi diagram of S—see Fig. 62.7(a).

(a)

(b)

(c)

FIGURE 62.7: (a) The Voronoi diagram of a set of points. (b) The dual graph of the Voronoi diagram. (c) The Delaunay triangulation of the points.

More formally, the Voronoi diagram of a set of sites S = {s1 , . . . , sn } in Rd , which we refer to as Vor(S), partitions space into n regions—one for each site—such that the region for a site si consists of all points that are closer to si than to any other site sj ∈ S. The set of points that are closest to a particular site si forms the so-called Voronoi cell of si , and is denoted by V (si ). Thus, when S is a set of sites in the plane we have V (si ) = {p ∈ R2 : dist(p, si ) < dist(p, sj ) for all j = i}, where dist(., .) denotes the Euclidean distance. Now consider the dual graph of the Voronoi diagram, that is, the graph that has a node for every Voronoi cell and an arc between any two Voronoi cells that share a common edge—see Fig. 62.7(b). (Observe that the concept of dual graph used here has nothing to do with the duality transform discussed in Section 62.2.3.) Suppose we embed this graph in the plane, by using the site si to represent the node corresponding to the cell V (si ) and by drawing the edges as straight line segments, as in Fig. 62.7(c). Somewhat surprisingly perhaps, this graph is always planar. Moreover, it is actually a triangulation of the point set S, assuming that no four points in S are co-circular. More details on this special triangulation, which is called the Delaunay triangulation, will be given in Section 62.5.1.

© 2005 by Chapman & Hall/CRC

62-12

Handbook of Data Structures and Applications

There exists a fascinating connection between Voronoi diagrams in Rd and half-space intersections in Rd+1 . Assume for simplicity that d = 2, and consider the transformation that maps a site s = (sx , sy ) in R2 to the non-vertical plane h(s) : z = 2sx x+2sy y −(s2x +s2y ) in R3 . Geometrically, h(s) is the plane tangent to the unit paraboloid z = x2 +y 2 at the point vertically above (sx , sy , 0). Let H(S) be the set of planes that are the image of a set of point sites S in the plane. Let S denote the convex polyhedron that is formed by the intersection of the positive half-spaces deﬁned by the planes in H(S), that is, S = h∈H(S) h+ , where h+ denotes the half-space above h. Surprisingly, the projection of the edges and vertices of S vertically downward on the xy-plane is exactly the Voronoi diagram of S. The Voronoi diagram can be deﬁned for various sets of sites, for example points, line segments, circles, or circular arcs, and for various metrics. Sections 62.4.1 and 62.4.2 discuss the complexity and construction algorithms of Voronoi diagrams for the usual case of point sites in Rd , while Section 62.4.3 describes some of the possible variations. Additional details and proofs of the material presented in this section can be found in [4, 5, 22].

62.4.1

Complexity

Let S be a set of n points in Rd . The Voronoi diagram of S is a cell complex in Rd . If d = 2 then the Voronoi cell of a site is the interior of a convex, possibly inﬁnite polygon. Its boundary consists of Voronoi edges, which are equidistant from two sites, and Voronoi vertices, which are equidistant from at least three sites. The Voronoi diagram of n ≥ 3 sites has at most 2n − 5 vertices and at most 3n − 6 edges, which implies that the Delaunay triangulation has at most 2n − 5 triangles and 3n − 6 edges. What is the complexity of the Voronoi diagram in d ≥ 3? Here the connection between Voronoi diagrams in Rd and intersections of half-spaces in Rd+1 comes in handy: we know from the Upper Bound Theorem that the intersection of n half-spaces in Rd+1 has complexity O(n(d+1)/2 ) = O(nd/2 ). This bound is tight, so the maximum complexity of the Voronoi diagram—and of the Delaunay triangulation, for that matter—in Rd is Θ(nd/2 ).

62.4.2

Construction

In this section we present several algorithms to compute the Voronoi diagram or its dual, the Delaunay triangulation, for point sites in Rd . Several of these algorithms can be generalized to work with metrics other than the Euclidean, and to sites other than points. Since the Voronoi diagram in the plane has only linear complexity one might be tempted to search for a linear time construction algorithm. However the problem of sorting n real numbers is reducible to the problem of computing Voronoi diagrams and, hence, any algorithm for computing the Voronoi diagram must take Ω(n log n) time in the worst case. Two data structures that are particularly well suited to working with planar subdivisions like the Voronoi diagram are the doubly-connected edge list (DCEL) by Muller and Preparata [38] and the quad-edge structure by Guibas and Stolﬁ [29]. Both structures require O(n) space, where n is the complexity of the subdivision, and allow to eﬃciently traverse the edges adjacent to a vertex and the edges bounding a face. In both structures, one can easily obtain in O(n) time a structure for the Voronoi diagram from a structure for the Delaunay triangulation, and vice versa. In fact, the quad-edge structure, as well as a variant of the DCEL [7], are representations of a planar subdivision and its dual at the same time, so there is nothing to convert (except, perhaps, that one may wish to explicitly compute the coordinates of the vertices in the Voronoi diagram, if the quad-edge structure or DCEL describes the Delaunay triangulation).

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

62-13

Divide-and-conquer. The ﬁrst deterministic worst-case optimal algorithm to compute the Voronoi diagram was given by Shamos and Hoey [52]. Their divide-and-conquer algorithm splits the set S of point sites by a dividing line into subsets L and R of approximately the same size. The Voronoi diagrams Vor(L) and Vor(R) are computed recursively and then merged into Vor(S) in linear time. This algorithm constructs the Voronoi diagram of a set of n points in the plane in O(n log n) time and linear space. Plane Sweep. The strategy of a sweep line algorithm is to move a line, called the sweep line, from top to bottom over the plane. While the sweep is performed, information is maintained regarding the structure one wants to compute. It is tempting to apply the same approach to Voronoi diagrams, by keeping track of the Voronoi edges that are currently intersected by the sweep line. It is problematic, however, to discover a new Voronoi region in time: when the sweep line reaches a new site, then the line has actually been intersecting the Voronoi edges of its region for a while. Fortune [23] was the ﬁrst to ﬁnd a way around this problem. Fortune’s algorithm applies the plane sweep paradigm in a slightly diﬀerent fashion: instead of maintaining the intersection of the sweep line with the Voronoi diagram, it maintains information of the part of the Voronoi diagram of the sites above the line that can not be changed by sites below it. This algorithm provides an alternative way of computing the Voronoi diagram of n points in the plane in O(n log n) time and linear space. Randomized incremental construction. A natural idea is to construct the Voronoi diagram by incremental insertion, that is, to obtain Vor(S) from Vor(S\{s}) by inserting the site s. Insertion of a site means integrating its Voronoi region into the diagram constructed so far. Unfortunately the region of s can have up to n − 1 edges, for |S| = n, which may lead to a running time of O(n2 ). The insertion process is probably better described and implemented in the dual environment, for the Delaunay triangulation DT : construct DTi = DT ({s1 , . . . , si }) by inserting si into DTi−1 . The advantage of this approach over a direct construction of Vor(S) is that Voronoi vertices that appear only in intermediate diagrams but not in the ﬁnal one need not be computed or stored. DTi is constructed by exchanging edges, using edge ﬂips [36], until all edges invalidated by si have been removed. Still, the worst-case running time of this algorithm can be quadratic. However, if we insert the sites in random order, and the algorithm is implemented carefully, then one can prove that the expected running time is O(n log n), and that the expected amount of storage is O(n). Other approaches. Finally, recall the connection between Delaunay triangulations and convex hulls. Since there exist O(n log n) algorithms to compute the convex hull of points in R3 (see Section 62.3) we therefore have yet another optimal algorithm for the computation of Voronoi diagrams.

62.4.3

Variations

In this section we present some of the common variations on Voronoi diagrams. The ﬁrst is the order-k Voronoi diagram of a set S of n sites, which partitions Rd on the basis of the ﬁrst k closest point sites. In other words, each cell in the order-k Voronoi diagram of a set S of sites in the plane corresponds to a k-tuple of sites from S and consists of those points in the plane for which that k-tuple are the k closest sites. One might fear that the order-k Voronoi diagram has Θ(nk ) cells, but this is not the case. In two dimensions, for example, its complexity is O(k(n−k)), and it can be computed in O(k(n−k) log n+n log3 n) expected time [2].

© 2005 by Chapman & Hall/CRC

62-14

Handbook of Data Structures and Applications

The furthest-site Voronoi diagram partitions Rd according to the furthest site, or equivalently, according to the closest n − 1 of n sites. The furthest-site Voronoi diagram can be computed in O(n log n) time in two dimensions, and in O(nd/2 ) in dimension d ≥ 3. One can also consider diﬀerent distance functions than the Euclidean distance. For example, one can alter the distance function by the addition of additive or multiplicative weights. In this case every point site si is associated with a weight wi and the distance function d(si , x) between a point x and a site si becomes d(si , x) = wi + dist(si , x) (additive weights) or d(si , x) = wi · dist(si , x) where dist(si , x) denotes the Euclidean distance between si and x. The Voronoi diagram for point sites in 2 dimensions with additive weights can be computed in O(n log n) time, for multiplicative weights the time increases to O(n2 ) time. Finally the power diagram, or Laguerre diagram, is another Voronoi diagram for point sites si that are associated with weights wi . Here the distance function is the power distance introduced by Aurenhammer [3], where the distance from a point x to a site siis measured along √ a line tangent to the sphere of radius wi centered at si , i.e., d(si , x) = dist(si , x)2 − wi . The power diagram can be computed in O(n log n) time in two dimensions.

62.5

Triangulations

In geometric data processing, structures that partition the geometric input, as well as connectivity structures for geometric objects, play an important role. Versatile tools in this context are triangular meshes, often called triangulations. A triangulation of a geometric domain such as a polygon in R2 or a polyhedron in R3 is a partition into simplices that meet only at shared faces. A triangulation of a point set S is a triangulation of the convex hull of S, such that the vertices in the triangulation are exactly the points in S. In the following sections, we ﬁrst discuss the most famous of all triangulations, the Delaunay triangulation. We then address triangulations of polygons and polyhedra in R3 . Finally we describe a recent generalization of triangulations: the pseudo-triangulation.

FIGURE 62.8: Triangulations of a point set, a simple polygon, and a polyhedron; a pseudotriangulation of a point set.

62.5.1

Delaunay Triangulation

In this section we provide additional detail on the Delaunay triangulation of a set S = {s1 , . . . , sn } of points in Rd , which was introduced in Section 62.4. There we deﬁned the Delaunay triangulation as the dual of the Voronoi diagram. In the plane, for instance, the Delaunay triangulation has an edge between sites si and sj if and only if the Voronoi cells of si and sj share a boundary edge. In higher dimensions, there is an edge between si and sj

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

62-15

if their Voronoi cells share a (d − 1)-facet. The Delaunay triangulation can also be deﬁned directly. If we restrict ourselves for the moment to a set S of points in R2 then the Delaunay triangulation of S, DT (S), is deﬁned by the empty-circle condition: a triangle ∆ deﬁned by three points si , sj , and sk is part of DT (S) if and only if ∆’s circumcircle neither encloses nor passes through any other points of S. More generally, d+1 points in Rd deﬁne a simplex in the Delaunay triangulation if and only if its circumscribed sphere neither encloses nor passes through any other points of S. If no d + 1 points of S are co-spherical then DT (S) is indeed a triangulation. If d + 2 or more points are co-spherical, then DT (S) can contain cells with more than d + 1 sides. Fortunately, such cells can easily be further decomposed in simplices—with a bottom-vertex triangulation, for example—so such degeneracies are not a real problem. To simplify the description, we from now on assume that these degeneracies do not occur. In the previous section we have seen a close connection between Voronoi diagrams in Rd and intersections of half-spaces in Rd+1 . Similarly, there is a close connection between the Delaunay triangulation in Rd and convex hulls in Rd+1 . Let’s again restrict ourselves to the case d = 2. Consider the transformation that maps a site s = (sx , sy ) in R2 onto the point λ(sx , sy ) = (sx , sy , s2x + s2y ) in R3 . In other words, s is “lifted” vertically onto the unit paraboloid to obtain λ(s). Let λ(S) be the set of lifted sites. Then if we project the lower convex hull of λ(S)—the part of the convex hull consisting of the facets facing downward—back onto the xy-plane, we get the Delaunay triangulation of S. The Delaunay triangulation is the “best” triangulation with respect to many optimality criteria. The Delaunay triangulation: • • • •

minimizes the maximum radius of a circumcircle; maximizes the minimum angle; maximizes the sum of inscribed circle radii; minimizes the “potential energy” of a piecewise-linear interpolating surface.

Also, the distance between any two vertices of the Delaunay triangulation along the triangulation edges is at most 2.42 times their Euclidean distance, that is, the dilation of the Delaunay triangulation is 2.42. Finally, the Delaunay triangulation contains as a subgraph many other interesting graphs: EM ST ⊆ RN G ⊆ GG ⊆ DT where EM ST is the Euclidean minimum spanning tree, RN G is the relative neighborhood graph, and GG is the Gabriel graph (see [49] for details on these graphs). Since the Delaunay triangulation is the dual of the Voronoi diagram, any algorithm presented in Section 62.4.2 can by used to eﬃciently compute the Delaunay triangulation. We therefore refrain from presenting any additional algorithms at this point.

62.5.2

Polygons

Triangulating a simple polygon P is not only an interesting problem in its own right, but it is also an important preprocessing step for many algorithms. For example, many shortestpath and visibility problems on a polygon P can be solved in linear time if a triangulation of P is given [27]. It is fairly easy to show that any polygon can indeed by decomposed into triangles by adding a number of diagonals and, moreover, that the number of triangles in any triangulation of a simple polygon with n vertices is n − 2. There are many algorithms to compute a triangulation of a simple polygon. Most of them run in O(n log n) time. Whether is is possible to triangulate a polygon in linear time

© 2005 by Chapman & Hall/CRC

62-16

Handbook of Data Structures and Applications

was a prominent open problem for several years until Chazelle [13], after a series of interim results, devised a linear-time algorithm. Unfortunately, his algorithm is more of theoretical than of practical interest, so it is probably advisable to use a deterministic algorithm with O(n log n) running time, such as the one described below, or one of the slightly faster randomized approaches with a time complexity of O(n log∗ n) [39]. In the remainder of this section we sketch a deterministic algorithm that triangulates a simple polygon P with n vertices in O(n log n) time. We say that a polygon P is monotone with respect to a line if the intersection of any line perpendicular to with P is connected. A polygon that is monotone with respect to the x-axis is called x-monotone. Now the basic idea is to decompose P into monotone polygons and then to triangulate each of these monotone polygons in linear time. There are several methods to decompose a simple polygon into x-monotone polygons in O(n log n) time. One approach is to sweep over P twice, from left to right and then from right to left, and to add appropriate edges to vertices that did not previously have at least one edge extending to the left and at least one edge extending to the right. A more detailed description of this or related approaches can be found in [7, 24]. (a)

(b)

pi

not yet triangulated

pi−1

pi

not yet triangulated

pi−1

FIGURE 62.9: Triangulating an x-monotone polygon.

Triangulating a monotone polygon. Now suppose we are given an x-monotone polygon P —see Fig. 62.9. We consider its vertices p1 , . . . , pn from left to right and use a stack to store the vertices of the not-yet-triangulated part of the polygon (which necessarily form a reﬂex chain) to the left of our current vertex pi . If pi is adjacent to pi−1 , as in see Fig. 62.9(a), then we pop vertices from the stack and connect them to pi until the stack (including pi ) forms a reﬂex chain again. In particular that might mean that we simply add pi to the stack. If pi is adjacent to the leftmost vertex on the stack, which could be pi−1 , as in see Fig. 62.9(b), then we connect pi to each vertex of the stack and clear the stack of all vertices except pi and pi−1 . This algorithm triangulates P in linear time.

62.5.3

Polyhedra

In this section we brieﬂy discuss triangulations (or tetrahedralizations) of three-dimensional polyhedra. A polyhedron P is a connected solid with a piecewise linear boundary (that is, its boundary is composed of polygons). We assume P to be non-degenerate: A suﬃciently small ball around any point of the boundary of P contains a connected component of the interior as well as the exterior of P . The number of vertices, edges, and faces of a nondegenerate tetrahedron are linearly related. Three dimensions unfortunately do not behave as nicely as two. Two triangulations of the same input data may contain quite diﬀerent numbers of tetrahedra. For example,

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

62-17

triangulation of a convex polyhedron with n vertices may contain between n − 3 and an−2 tetrahedra. Furthermore, some non-convex polyhedra can not be triangulated at 2 all without the use of additional (so-called Steiner ) points. The most famous example is Sch¨ onhardt’s polyhedron. Finally, it is NP-complete to determine whether a polyhedron can be triangulated without Steiner points and to test whether k Steiner points are suﬃcient [46]. Chazelle [12] constructed a polyhedron with n vertices that requires Ω(n2 ) Steiner points. On the other hand, any polyhedron can be triangulated with O(n2 ) tetrahedra, matching his lower bound. If one pays special attention to the reﬂex vertices of the input polyhedron P , then it is even possible to triangulate P using only O(n + r2 ) tetrahedra, where r is the number of reﬂex edges of P [15].

62.5.4

Pseudo-Triangulations

In recent years a relaxation of triangulations, called pseudo-triangulations, has received considerable attention. Here, faces are bounded by three concave chains, rather than by three line segments. More formally, a pseudo-triangle is a planar polygon that has exactly three convex vertices with internal angles less than π, all other vertices are concave. Note that every triangle is a pseudo-triangle as well. The three convex vertices of a pseudotriangle are called its corners. Three concave chains, called sides, join the three corners. A pseudo-triangulation for a set S of points in the plane is a partition of the convex hull of S into pseudo-triangles whose vertex set is exactly S—see Fig. 62.8. Pseudo-triangulations, also called geodesic triangulations, were originally studied for convex sets and for simple polygons in the plane because of their applications to visibility [40, 41] and ray shooting [16, 25]. But in the last few years they also found application in robot motion planning [55] and kinetic collision detection [1, 35]. Of particular interest are the so-called minimum pseudo-triangulations, which have the minimum number of pseudo-triangular faces among all possible pseudo-triangulations of a given domain. They were introduced by Streinu [55], who established that every minimum pseudo-triangulation of a set S of n points consists of exactly n − 2 pseudo-triangles (here we do not count the outer face). Note that such a statement cannot be made for ordinary triangulations: there the number of triangles depends on the number of points that show up on the convex hull of S. Minimum pseudo-triangulations are also referred to as pointed pseudo-triangulations. The name stems from the fact that every vertex v of a minimum pseudo-triangulation has an incident region whose angle at v is greater than π. The converse is also true (and can be easily established via Euler’s relation): If every vertex of a pseudo-triangulation is pointed—it has an incident angle greater than π—then this pseudo-triangulation has exactly n − 2 pseudo-triangles and is therefore minimum. A pseudo-triangulation is called minimal (as opposed to minimum) if the union of any two faces is not a pseudo-triangle. In general, all minimum pseudo-triangulations are also minimal, but the opposite is not necessarily true—see Figure 62.10(a) for an example of a minimal but not minimum pseudo-triangulation. The great variety of applications in which pseudo-triangulations are successfully employed prompted a growing interest in their geometric and combinatoric properties, which often deviate substantially from those of ordinary triangulations. An example of a nice property of pseudo-triangulations is that every point set in the plane admits a pseudo-triangulation of maximum vertex degree 5 [33]. (This bound is tight.) Again, this is not the case for ordinary triangulations: any ordinary triangulation of the point set depicted in Figure 62.10(b), contains a vertex of degree n − 1. Up to now there are unfortunately no extensions of pseudo-triangulations to dimensions higher than two which retain a signiﬁcant subset of their useful planar properties.

© 2005 by Chapman & Hall/CRC

62-18

Handbook of Data Structures and Applications (a)

(b)

FIGURE 62.10: (a) A minimal but not minimum pseudo-triangulation. (b) A point set for which every triangulation has a vertex of high degree.

References [1] P. K. Agarwal, J. Basch, L. J. Guibas, J. Hershberger, and L. Zhang. Deformable free space tilings for kinetic collision detection. Int. J. Robotics Research 21(3):179–197, 2002. [2] P. K. Agarwal, M. de Berg, J. Matousek, and O. Schwartzkopf. Constructing levels in arrangements and higher order Voronoi diagrams. In Proc. 11th Symp. Comput. Geom., pages 71–78, 1995. [3] F. Aurenhammer. Power diagrams: properties, algorithms, and applications. Siam J. Comput., 16:78–96, 1987. [4] F. Aurenhammer. Voronoi diagrams – a survey of a fundamental geometric data structure. In ACM Comput. Surv., 23:345-405, 1991. [5] F. Aurenhammer and R. Klein. Voronoi diagrams. In J. Sack and G. Urrutia, editors, Handbook of Computational Geometry, Chapter V, pages 201-290. Elsevier Science Publishing, 2000. [6] S. Basu. On the combinatorial and topological complexity of a single cell. In Proc. 39th Annu. IEEE Sympos. Found. Comput. Sci., pages 606–616, 1998. [7] M. de Berg, M. van Kreveld, M. Overmars, and O. Schwarzkopf. Computational Geometry: Algorithms and Applications (2nd Ed.). Springer-Verlag, 2000. [8] J.-D. Boissonnat and M. Yvinec. Algorithmic Geometry. Cambridge University Press, 1998. [9] G. S. Brodal and R. Jacob. Dynamic Planar Convex Hull. In Proc. 43rd Annu. IEEE Sympos. Found. Comput. Sci., pages 617-626, 2002. [10] T. Chan. Output-sensitive results on convex hulls, extreme points, and related problems. Discr. Comput. Geom. 16:369–387 (1996). [11] T. Chan. Dynamic planar convex hull operations in near-logarithmic amortized time. J. ACM. 48:1–12 (2001). [12] B. Chazelle. Convex partitions of polyhedra: a lower bound and worst-case optimal algorithm. SIAM J. Comput., 13:488–507, 1984. [13] B. Chazelle. Triangulating a simple polygon in linear time. Discrete Comput. Geom., 6:485–524, 1991. [14] B. Chazelle. An optimal convex hull algorithm in any ﬁxed dimension. Discr. Comput. Geom. 10:377–409 (1993). [15] B. Chazelle and L. Palios. Triangulating a nonconvex polytope. Discrete Comput. Geom., 5:505–526, 1990. [16] B. Chazelle, H. Edelsbrunner, M. Grigni, L. J. Guibas, J. Hershberger, M. Sharir, and J. Snoeyink. Ray shooting in polygons using geodesic triangulations. Algorithmica, 12:54–68, 1994. [17] K. L. Clarkson and P.W. Shor. Applications of random sampling in computational geometry, II. Discr. Comput. Geom. 4:387–421 (1989).

© 2005 by Chapman & Hall/CRC

Computational Geometry: Fundamental Structures

62-19

[18] R. A. Dwyer. On the convex hull of random points in a polytope. J. Appl. Probab. 25:688–699 (1988). [19] R. A. Dwyer. Kinder, gentler average-case analysis for convex hulls and maximal vectors. SIGACT News 21:64–71 (1990). [20] H. Edelsbrunner. Algorithms in Combinatorial Geometry. Springer-Verlag, 1987. [21] H. Edelsbrunner. The upper envelope of piecewise linear functions: Tight complexity bounds in higher dimensions. Discr. Comput. Geom. 4:337–343 (1989). [22] S. Fortune. Voronoi Diagrams and Delaunay Triangulations. In: F.K. Hwang and D.-Z. Du (eds.), Computing in Euclidean Geometry, 2nd Edition. World Scientiﬁc, pages 225-265, 1995. [23] S. Fortune. A sweepline algorithms for Voronoi diagrams. Algorithmica, 2:153–174, 1987. [24] J. E. Goodman and J. O’Rourke (Eds.). Handbook of Discrete and Computational Geometry. CRC Press LLC, 1997. [25] M. Goodrich and R. Tamassia. Dynamic ray shooting and shortest paths in planar subdivision via balanced geodesic triangulations. J. Algorithms 23:51–73, 1997. [26] R. L. Graham. An eﬃcient algorithm for determining the convex hull of a ﬁnite planar set. Inf. Proc. Lett. 1:132–133 (1972). [27] L. J. Guibas, J. Hershberger, D. Leven, M. Sharir, and R. E. Tarjan. Linear-time algorithms for visibility and shortest path problems inside triangulated simple polygons. Algorithmica, 2:209–233, 1987. [28] L. J. Guibas, M. Sharir, and S. Sifrony. On the general motion planning problem with two degrees of freedom. Discr. Comput. Geom. 4:491–521 (1989). [29] L. J. Guibas and J. Stolﬁ. Primitives for the manipulation of general subdivisions and the computation of Voronoi diagrams. ACM Trans. Graph., 4:74–123, 1985. [30] D. Halperin and M. Sharir. New bounds for lower envelopes in three dimensions, with applications to visibility in terrains. Discr. Comput. Geom. 12:313–326 (1994). [31] J. Hershberger and S. Suri. Applications of semi-dynamic convex hull algorithms. BIT 32:249–267 (1992). [32] J. Hershberger and S. Suri. Oﬀ-line maintenance of planar conﬁgurations. J. Algorithms 21:453–475 (1996). [33] L. Kettner, D. Kirkpatrick, A. Mantler, J. Snoeyink, B. Speckmann, and F. Takeuchi. Tight degree bounds for pseudo-triangulations of points. Comp. Geom. Theory Appl., 25:1–12, 2003. [34] D. Kirkpatrick and R. Seidel. The ultimate planar convex hull algorithm? SIAM J. Comput. 15:287–299 (1986). [35] D. Kirkpatrick, J. Snoeyink, and B. Speckmann. Kinetic collision detection for simple polygons. Int. J. Comput. Geom. Appl. 12(1&2):3–27, 2002. [36] C. L. Lawson. Software for C 1 surface interpolation. In J.R. Rie, editor, Math. Software III, pages 161–194, New York, NY, 1977. Academic Press. [37] P. McMullen. The maximal number of faces of a convex polytope. Mathematica 17:179–184 (1970). [38] D. E. Muller and F. P. Preparata. Finding the intersection of two convex polyhedra. Theoret. Comput. Sci., 7:217–236, 1978. [39] K. Mulmuley. Computational Geometry: an Introduction through Randomized Algorithms. Prentice Hall, 1994. [40] M. Pocchiola and G. Vegter. Minimal tangent visibility graphs. Comput. Geom. Theory Appl., 6:303–314, 1996. [41] M. Pocchiola and G. Vegter. Topologically sweeping visibility complexes via pseudotriangulations Discrete Comp. Geom., 16:419–453, 1996.

© 2005 by Chapman & Hall/CRC

62-20

Handbook of Data Structures and Applications

[42] F. P. Preparata. An optimal real-time algorithm for planar convex hulls. Comm. ACM 22:405–408 (1979). [43] F. P. Preparata and S. J. Hong. Convex hulls of ﬁnite sets of points in two and three dimensions. Comm. ACM 20:87–93 (1977). [44] A. Okabe, B. Boots, K. Sugihara, and S. N. Chiu. Spatial Tessellations: Concepts and Applications of Voronoi Diagrams (2nd Ed.). Wiley, 2000. [45] J. O’Rourke. Computational Geometry in C (2nd Ed.). Cambridge University Press, 1998. [46] J. Rupert and R. Seidel. On the diﬃculty of tetrahedralizing 3-dimensional non-convex polyhedra. Discrete Comput. Geom., 7:227-253, 1992. [47] M. H. Overmars and J. van Leeuwen. Maintenance of conﬁgurations in the plane. J. Comput. Systs. Sci. 23:166–204 (1981) [48] R. Pollack, M. Sharir, and S. Sifrony. Separating two simple polygons by a sequence of translations. Discr. Comput. Geom. 3:123–136 (1988). [49] F. P. Preparata and M. I. Shamos. Computational Geometry: An Introduction. Springer-Verlag, 1985. [50] J.-R. Sack and J. Urrutia (Eds.). Handbook of Computational Geometry. Elsevier Science, 2000. [51] R. Seidel. Small-dimensional linear programming and convex hulls made easy. Discr. Comput. Geom. 6:423–434 (1991). [52] M. I. Shamos and D. Hoey. Closest-point problems. In Proc. 16th IEEE Symp. Found. Comput. Science, pages 151–162, 1975. [53] M. Sharir and P. K. Agarwal. Davenport-Schinzel Sequences and Their Geometric Applications. Cambridge University Press, 1995. [54] M. Sharir. Almost tight upper bounds for lower envelopes in higher dimensions. Discr. Comput. Geom. 12:327–345 (1994). [55] I. Streinu. A combinatorial approach to planar non-colliding robot arm motion planning. In Proc. 41st FOCS, 2000, pp. 443–453. [56] B. Tagansky. A new technique for analyzing substructures in arrangements of piecewise linear surfaces. Discr. Comput. Geom. 16:455–479 (1996).

© 2005 by Chapman & Hall/CRC

63 Computational Geometry: Proximity and Location 63.1 63.2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Point Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

63-1 63-2

Kirkpatrick’s Algorithm • Slab-Based Methods and Persistent Trees • Separating Chains and Fractional Cascading • Trapezoidal Maps and the History Graph • Worst- and Expected-Case Optimal Point Location

63.3

Proximity Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Voronoi Diagrams • Delaunay Triangulations Geometric Proximity Structures

Sunil Arya

63.4

David M. Mount

63.1

63-9

Other

Nearest Neighbor Searching . . . . . . . . . . . . . . . . . . . . . . 63-12 Nearest Neighbor Searching through Point Location • K-d trees • Other Approaches to Nearest Neighbor Searching • Approximate Nearest Neighbor Searching • Approximate Voronoi Diagrams

Hong Kong University of Science and Technology

University of Maryland

•

63.5

Sources and Related Material . . . . . . . . . . . . . . . . . . . . 63-18

Introduction

Proximity and location are fundamental concepts in geometric computation. The term proximity refers informally to the quality of being close to some point or object. Typical problems in this area involve computing geometric structures based on proximity, such as the Voronoi diagram, Delaunay triangulation and related graph structures such as the relative neighborhood graph. Another class of problems are retrieval problems based on proximity. These include nearest neighbor searching and the related concept of range searching. (See Chapter 18 for a discussion of data structures for range searching.) Instances of proximity structures and proximity searching arise in many ﬁelds of applications and in many dimensions. These applications include object classiﬁcation in pattern recognition, document analysis, data compression, and data mining. The term location refers to the position of a point relative to a geometric subdivision or a given set of disjoint geometric objects. The best known example is the point location problem, in which a subdivision of space into disjoint regions is given, and the problem is to identify which region contains a given query point. This problem is widely used in areas such as computer graphics, geographic information systems, and robotics. Point location is also used as a method for proximity searching, when applied in conjunction with Voronoi diagrams.

63-1

© 2005 by Chapman & Hall/CRC

63-2

Handbook of Data Structures and Applications

In this chapter we will present a number of geometric data structures that arise in the context of proximity and location. The area is so vast that our presentation will be limited to a relatively few relevant results. We will discuss data structures for answering point location queries ﬁrst. After this we will introduce proximity structures, including Voronoi diagrams and Delaunay triangulations. Our presentation of these topics will be primarily restricted to the plane. Finally, we will present results on multidimensional nearest neighbor searching.

63.2

Point Location

The planar point location problem is one of the most fundamental query problems in computational geometry. Consider a planar straight line graph S. (See Chapter 17 for details.) This is an undirected graph, drawn in the plane, whose edges are straight line segments that have pairwise disjoint interiors. The edges of S subdivide the plane into (possibly unbounded) polygonal regions, called faces. Henceforth, such a structure will be referred to as a polygonal subdivision. Throughout, we let n denote the combinatorial complexity of S, that is, the total number of vertices, edges and faces. (We shall occasionally abuse notation and use n to refer to the speciﬁc number of vertices, edges, or faces of S.) A planar subdivision is a special case of the more general topological concept of a cell complex [35], in which vertices, edges, and generally faces of various dimensions are joined together so that the intersection of any two faces is either empty or is a face of lower dimension. The point location problem is to preprocess a polygonal subdivision S in the plane into a data structure so that, given any query point q, the polygonal face of the subdivision containing q can be reported quickly. (In Figure 63.1(a), face A would be reported.) This problem is a natural generalization of the binary search problem in 1-dimensional space, where the faces of the subdivision correspond to the intervals between the 1-dimensional key values. By analogy with the 1-dimensional case, the goal is to preprocess a subdivision into a data structure of size O(n) so that point location queries can be answered in O(log n) time. query point B

E

A

D F C (a)

G

s (b)

FIGURE 63.1: Illustration of (a) point location and (b) vertical ray shooting queries.

A slightly more general formulation of the problem, which is applicable even when the input is not a subdivision is called vertical ray shooting. A set S of line segments is given with pairwise disjoint interiors. Given a query point q, the problem is to determine the line segment of S that lies vertically below q. (In Figure 63.1(b), the segment s would be reported.) If the ray hits no segment, a special value is returned. When S is a polygonal subdivision, point location can be reduced to vertical ray shooting by associating each edge of S with the face that lies immediately above it.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63.2.1

63-3

Kirkpatrick’s Algorithm

Kirkpatrick was the ﬁrst to present a simple point location data structure that is asymptotically optimal [52]. It answers queries in O(log n) time using O(n) space. Although this is not the most practical approach to point location, it is quite easy to understand. Kirkpatrick starts with the assumption that the planar subdivision has been reﬁned (through the addition of O(n) new edges and vertices) so that it is a triangulation whose external face is a triangle. Let T0 denote this initial triangulation subdivision. Kirkpatrick’s method generates a ﬁnite sequence of increasingly coarser triangulations, T0 , T1 , T2 , . . . , Tm , where Tm consists of the single triangle forming the outer face of the original triangulation. This sequence satisﬁes the following constraints: (a) each triangle of Ti+1 intersects a constant number of triangles of Ti , and (b) the number of vertices of Ti+1 is smaller than the number of vertices of Ti by a constant fraction. (See Figure 63.2.) The data structure itself is a rooted DAG (directed acyclic graph), where the root of the structure corresponds to the single triangle of Tm , and the leaves correspond to the triangles of T0 . The interior nodes of the DAG correspond to the triangles of each of the triangulations. A directed edge connects each triangle in Ti+1 with each triangle in Ti that it overlaps. Given a query point q, the point location query proceeds level-by-level through the DAG, visiting the nodes corresponding to the triangles that contain q. By property (a), each triangle in Ti+1 overlaps a constant number of triangles of Ti , which implies that it is possible to descend one level in the data structure in O(1) time. It follows that the running time is proportional to the number of levels in the tree. By property (b), the number of vertices decreases at each level by a ﬁxed constant fraction, and hence, the number of levels is O(log n). Thus the overall query time is O(log n).

T0

T1

T2

q

T3

q

T4

q

q

FIGURE 63.2: The sequence of triangulations generated in the construction of Kirkpatrick’s structure (above) and the triangles visited in answering a point location query (below).

Kirkpatrick showed how to build the data structure by constructing a sequence of triangulations satisfying the above properties. Kirkpatrick’s approach is to compute an independent set of vertices (that is, a set of mutually nonadjacent vertices) in Ti where each vertex of the independent set has constant degree. (An example is shown at the top of Figure 63.2. The vertices of the independent set are highlighted.) The three vertices of the outer face are not included. Kirkpatrick showed that there exists such a set whose size is a constant fraction of the total number of vertices, and it can be computed in linear time. These vertices are removed along with any incident edges, and the resulting “holes” are then retriangulated. Kirkpatrick showed that the two properties hold for the resulting sequence of triangulations.

© 2005 by Chapman & Hall/CRC

63-4

63.2.2

Handbook of Data Structures and Applications

Slab-Based Methods and Persistent Trees

Many point location methods operate by reﬁning the given subdivision to form one that is better structured, and hence, easier to search. One approach for generating such a reﬁnement is to draw a vertical line through each vertex of the subdivision. These lines partition the plane into a collection of O(n) vertical slabs, such that there is no vertex within each slab. As a result, the intersection of the subdivision with each slab consists of a set of line segments, which cut clear through the slab. These segments thus partition the slab into a collection of disjoint trapezoids with vertical sides. (See Figure 63.3.)

FIGURE 63.3: Slab reﬁnement of a subdivision. Point location queries can be answered in O(log n) time by applying two binary searches. The ﬁrst search accesses the query point’s x coordinate to determine the slab containing the query point. The second binary search tests whether the query point lies above or below individual lines of the slab, in order to determine which trapezoid contains the query point. Since each slab can be intersected by at most n lines, this second search can be done in O(log n) time as well. A straightforward implementation of this method is not space eﬃcient, since there are Ω(n) slabs,∗ each having up to Ω(n) intersecting segments, for a total of Ω(n2 ) space. However, adjacent slabs are very similar, since the only segments that change are those that are incident to the vertices lying on the slab boundary. Sarnak and Tarjan [67] exploited this idea to produce an optimal point location data structure. To understand their algorithm, imagine sweeping a line segment continuously from left to right. Consider the sorted order of subdivision line segments intersecting this sweep line. Whenever the sweep line encounters a vertex of the subdivision, the edges incident to this vertex lying to the left of the vertex are removed from the sweep-line order and incident edges to the right of the vertex are inserted. Since every edge is inserted once and deleted once in this process, the total number of changes over the entire sweep process is O(n). Sarnak and Tarjan proposed maintaining a persistent variant of the search tree. A persistent search tree is a dynamic search tree (supporting insertion and deletion) which can answer queries not only to the current tree, but to any of the previous versions in the history of the tree’s lifetime as well. (See Chapter 31.) In this context, the history of changes to the search tree is maintained in a left to right sweep of the plane. The persistent search tree supports queries to any of these trees, that is, in any of the slabs, in O(log n) time. The clever aspect of Sarnak and Tarjan’s tree is that it can be stored in O(n) total space

∗ For readers unfamiliar with this notation, Ω(f (n)) is analogous to the notation O(f (n)), but it provides an asymptotic lower bound rather than an upper bound. The notation Θ(f (n)) means that both upper and lower bounds apply [30].

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63-5

(as opposed to O(n2 ) space, which would result by generating O(n) copies of the tree). This is done by a method called limited node copying. Thus, this provides an asymptotically optimal point location algorithm. A similar approach was discovered independently by Cole [29].

63.2.3

Separating Chains and Fractional Cascading

Slab methods use vertical lines to help organize the search. An alternative approach, ﬁrst suggested by Lee and Preparata [55], is to use a divide-and-conquer approach based on a hierarchy of monotone polygon chains, called separating chains. A simple polygon is said to be x-monotone if the intersection of the interior of the polygon with a vertical line is connected. An x-monotone subdivision is one in which all the faces are x-monotone. The separating chain method requires that the input be an x-monotone subdivision. Fortunately, it is possible to convert any polygonal subdivision in the plane into an x-monotone subdivision in O(n log n) time, through the addition of O(n) new edges. (See, for example, [31, 55, 64].) For example, Figure 63.4(a) shows a subdivision that is not x-monotone, but the addition of two edges suﬃce to produce an x-monotone subdivision shown in Figure 63.4(b).

9 7

8 6

5

8

7

6

5

4

4 3

2

3

2 1

1 0 (a)

9 8

9

(b)

0

7 6 5 4 3 2 1 0

(c)

FIGURE 63.4: Point location by separating chains: (a) the original subdivision, (b) the addition of one or more edges to make the subdivision x-monotone, (c) decomposition of the subdivision into a hierarchy of separating chains.

Consider an x-monotone subdivision with n faces. It is possible to order the faces f0 , f1 , . . . , fn−1 such that if i < j, then every vertical line that intersects both of these faces intersects fi below fj . (See Figure 63.4(b).) For each i, 0 < i < n, deﬁne the ith separating chain to be the x-monotone polygonal chain separating faces whose indices are less than i from those that are greater than or equal to i. Observe that, given a chain with m edges, it is possible to determine whether a given query point lies above or below the chain in O(log m) time, by ﬁrst performing a binary search on the x-coordinates of the chain, in order to ﬁnd which chain edge overlaps the query point, and then determining whether the query point lies above or below this edge in O(1) time. The separating chain method works intuitively by performing a binary search on these chains. The binary search can be visualized as a binary tree imposed on the chains, as shown in Figure 63.4(c). Although many chains traverse the same edge, it suﬃces to store each edge only once in the structure, namely with the chain associated with the highest node in the binary tree. This is because once a discrimination of the query point is made with respect to such an

© 2005 by Chapman & Hall/CRC

63-6

Handbook of Data Structures and Applications

edge, its relation is implicitly known for all other chains that share the same edge. It follows that the total space is O(n). As mentioned above, at each chain the search takes logarithmic time to determine whether the query point is above or below the chain. Since there are Ω(n) chains, this would lead to an Ω(log2 n) algorithm [55]. There is a clever way to reduce the search time to O(log n), through the use of a simple and powerful method called fractional cascading [24, 36]. Intuitively, fractional cascading seeks to replace a sequence of independent binary searches with a more eﬃcient sequence of coordinated searches. After searching through a parent’s chain, it is known which edge of this chain the query point overlaps. Thus, it is not necessary to search the entire range of x-coordinates for the child’s chain, just the sublist of x-coordinates that overlap this interval. However, in general, the number of edges of the child’s chain that overlaps this interval may be as large as Ω(n), and so this observation would seem to be of no help. In fractional cascading, this situation is remedied by augmenting each list. Starting with the leaf level, the x-coordinate of every fourth vertex is passed up from each child’s sorted list of x-coordinates and inserted into its parent’s list. This is repeated from the parent to the grandparent, and so on. After doing this, once the edge of the parent’s chain that overlaps the query point has been determined, there can be at most four edges of the child’s chain that overlap this interval. (For example, in Figure 63.5 the edge pq is overlapped by eight edges at the next lower level. After cascading, it is broken into three subedges, each of which overlaps at most four edges at the next level.) Thus, the overlapping edge in the child’s chain can be found in O(1) time. The root requires O(log n) time, and each of the subsequent O(log n) searches can be performed in O(1) additional time. It can be shown that this augmentation of the lists increases the total size of all the lists by at most a constant factor, and hence the total space is still O(n).

p

q

FIGURE 63.5: Example of fractional cascading. Every fourth vertex is sampled from each chain and inserted in its parent’s chain.

63.2.4

Trapezoidal Maps and the History Graph

Next we describe a randomized approach for point location. It is quite simple and practical. Let us assume that the planar subdivision is presented simply as a set of n line segments S = {s1 , s2 , . . . , sn } with pairwise disjoint interiors. The algorithm answers vertical rayshooting queries as described earlier. This approach was developed by Mulmuley [60]. Also see Seidel [68]. The algorithm is based on a structure called a trapezoidal map (or trapezoidal decomposition). First, assume that the entire domain of interest is enclosed in a large rectangle. Imagine shooting a bullet vertically upwards and downwards from each vertex in the polygonal subdivision until it hits another segment of S. To simplify the presentation, we shall assume that the x-coordinates of no two vertices are identical. The segments of S together

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63-7

with the resulting bullet paths subdivide the plane into O(n) trapezoidal cells with vertical sides, which may degenerate to triangles. (See Figure 63.6(a).)

B

R

s

p L (a)

s

A

p L

A

R (b)

B (c)

FIGURE 63.6: A trapezoidal map of a set of segments (a), and the two types of internal nodes: x-node (b) and y-node (c).

For the purposes of point location, the trapezoidal map is created by a process called a randomized incremental construction. The process starts with the initial bounding rectangle (that is, one trapezoid) and then the segments of S are inserted one by one in random order. As each segment is added, the trapezoidal map is updated by “walking” the segment through the subdivision, and updating the map by shooting new bullet paths through the segments endpoints and trimming existing paths that hit the new segment. See [31, 60, 68] for further details. The number of changes in the diagram with each insertion is proportional to the number of vertical segments crossed by the newly added segment, which in the worst case may be as high as Ω(n). It can be shown, however, that on average each insertion of a new segment results in O(1) changes. This is true irrespective of the distribution of the segments, and the expectation is taken over all possible insertion orders.

b p

s1

1

b

q1

p

1

d

a

s1

c

a

e p

2

p1

q1

s1

i b

s2

g

q2

q1

a

a h

f

p1

q1

q2 s1

d c

s2

i

p2

b

s2

e f

h g

FIGURE 63.7: Example of incremental construction of a trapezoidal map and the associated history DAG. The insertion of segment s2 replaces the leaves associated with destroyed trapezoids c and d with an appropriate search structure for the new trapezoids e–i.

The point location data structure is based on a rooted directed acyclic graph, or DAG, called the history DAG. Each node has either two outgoing edges (internal nodes) or none (leaves). Leaves correspond one-to-one with the cells of the trapezoidal map. There are two types of internal nodes, x-nodes and y-nodes. Each x-node contains the x-coordinate x0 of an endpoint of one of the segments, and its two children correspond to the points lying to the left and to the right of the vertical line x = x0 . Each y-node contains a pointer to

© 2005 by Chapman & Hall/CRC

63-8

Handbook of Data Structures and Applications

a line segment of the subdivision. The left and right children correspond to whether the query point is above or below the line containing this segment, respectively. (In Figure 63.7, x-nodes are shown as circles, y-nodes as hexagons, and leaves as squares.) As with Kirkpatrick’s algorithm, the construction of the point location data structure encodes the history of the randomized incremental construction. Let T0 , T1 , . . . , Tn denote the sequence of trapezoidal maps that result through the randomized incremental process. The point location structure after insertion of the ith segment has one leaf for each trapezoid in Ti . Whenever a segment is inserted, the leaf nodes corresponding to trapezoids that were destroyed are replaced with internal x- and y-nodes that direct the search to the location of the query point in the newly created trapezoids, after the insertion. (This is illustrated in Figure 63.7.) Through the use of node sharing, the resulting data structure can be shown to have expected size O(n), and its expected depth is O(log n), where the expectation is over all insertion orders. Details can be found in [31, 60, 68].

63.2.5

Worst- and Expected-Case Optimal Point Location

Goodrich, Orletsky and Ramaiyer [43] posed the question of bounding the minimum number of comparisons required, in the worst case, to answer point location queries in a subdivision of n segments. Adamy and Seidel [1] provided a deﬁnitive √ answer by showing that point location queries can be answered with log2 n + 2 log2 n + o( log n) primitive comparisons. They also gave a similar lower bound. Another natural question involves the expected-case complexity of point location. Given a polygonal subdivision S, assume that each cell z ∈ S is associated with the probability pz that a query point lies in z. The problem is to produce a point location data structure whose expected search time is as low as possible. The appropriate target bound on the number of comparisons is given by the entropy of the subdivision, which is denoted by H and deﬁned: entropy(S) = H = pz log2 (1/pz ). z∈S

In the 1-dimensional case, a classical result due to Shannon implies that the expected number of comparisons needed to answer such queries is at least as large as the entropy of the probability distribution [53, 71]. Mehlhorn [58] showed that in the 1-dimensional case it is possible to build a binary search tree whose expected search time is at most H + 2. Arya, Malamatos, and Mount [5, 6] presented a number of results on this problem in the planar case, and among them they showed that for a polygonal subdivision of size n in which each cell has constant combinatorial complexity, it is possible to answer point location queries with H + o(H) comparisons in the expected case using space that is nearly linear in n. Their results also applied to subdivisions with convex cells, assuming the query distribution is uniform within each cell. Their approach was loosely based on computing a binary space partition (BSP) tree (see Chapter 20) satisfying two properties: (a) The entropy of the subdivision deﬁned by the leaves of the BSP should be close to the entropy of the original subdivision. (b) The depth of a leaf should be close to log2 (1/p), where p is the probability that a query point lies within the leaf. Arya, Malamatos, and Mount [7] also presented a simple weighted variant of the randomized incremental algorithm and showed that it can answer queries in O(H) expected time and O(n) space. Iacono [48] presented a deterministic weighted variant based on Kirkpatrick’s algorithm.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63.3

63-9

Proximity Structures

Proximity structures arise from numerous applications in science and engineering. It is a fundamental fact that nearby objects tend to exert a greater inﬂuence and have greater relevance than more distant objects. Proximity structures are discrete geometric and graph structures that encode proximity information. We discuss a number of such structures, including Voronoi diagrams, Delaunay triangulations, and various geometric graph structures, such as the relative neighborhood graph.

63.3.1

Voronoi Diagrams

The Voronoi diagram of a set of sites S is a partition of space into regions, one per site, where the region for site s is the set of points that are closer to s than to any other site of S. This structure has been rediscovered and applied in many diﬀerent branches of science and goes by various names, including Thiessen diagrams and Dirichlet tessellations. Henceforth, we consider the most common case in which the sites S consist of a set of n points in real d-dimensional space, Rd , and distances are measured using the Euclidean metric. The set of points of Rd that are closer to some site s ∈ S than any other site is called the Voronoi cell of s, or V (s). (See Figure 63.8.) The union of the boundaries of the Voronoi cells is the Voronoi diagram of S, denoted Vor(S). Observe that the set of points of Rd that are closer to s than some other site t consists of the points that lie in the open halfspace deﬁned by a plane that bisects the pair (s, t). It follows that each Voronoi cell is the intersection of n − 1 halfspaces, and hence, it is a (possibly unbounded) convex polyhedron. A Voronoi diagram in dimension d is a cell complex whose faces of all dimensions are convex polyhedra. In the plane a Voronoi diagram is a planar straight line graph with possibly unbounded edges. It can be represented using standard methods for representing polygonal subdivisions and cell complexes (see Chapter 17).

V(s) s

FIGURE 63.8: The Voronoi diagram and a Voronoi cell V (s).

The Voronoi diagram possesses a number of useful geometric properties. For example, for a set of points in the plane, each edge of the Voronoi diagram lies on the perpendicular bisector between two sites. The vertices of the Voronoi diagram lie at the center of an empty circle passing through the incident sites. If the points are in general position (and in particular if no four points are cocircular) then every vertex of the diagram is incident to exactly three edges. In fact, it is not hard to show that the largest empty circle whose center lies within the convex hull of a given point set will coincide with a Voronoi vertex. In higher dimensions, each face of dimension k of the Voronoi diagram consists of the points of Rd that are equidistant from a subset of d − k + 1 sites, and all other sites are strictly

© 2005 by Chapman & Hall/CRC

63-10

Handbook of Data Structures and Applications

farther away. In the plane the combinatorial complexity of the Voronoi diagram is O(n), and in dimension d its complexity is Θ(nd/2 ). Further information on algorithms for constructing Voronoi diagrams as well as variants of the Voronoi diagram can be found in Chapter 62. Although we deﬁned Voronoi diagrams for point sites, it is possible to deﬁne them for any type of geometric object. One such variant involves replacing point sites with line segments or generally the boundary of any region of the plane. Given a region P (e.g., a simple polygon), the medial axis is deﬁned to be the set of centers of maximal balls contained in P , that is, balls contained in P that are not contained in another ball in P [32]. The medial axis is frequently used in pattern recognition and shape matching. It consists of a combination of straight-line segments and hyperbolic arcs. It can be computed in O(n log n) time by a modiﬁcation of Fortune’s sweepline algorithm [39]. Finally, it is possible to generalize Voronoi diagrams to other metrics, such as the L1 and L∞ metrics (see Section 63.4).

63.3.2

Delaunay Triangulations

The Delaunay triangulation is a structure that is closely related to the Voronoi diagram. The Delaunay triangulation is deﬁned as follows for a set S of n point sites in the plane. Consider any subset T ⊆ S of sites, such that there exists a circle that passes through all the points of T , and contains no point of S in its interior. Such a subset is said to satisfy the empty circumcircle property. For example, in Figure 63.9(a), the pair {p, q} and triple {r, s, t} both satisfy the empty circumcircle property. The Delaunay triangulation is deﬁned to be the union of the convex hulls of all such subsets. It can be shown that the result is a cell complex. Furthermore, if the points are in general position, and in particular, no four points are cocircular, then the resulting structure is a triangulation of S. (If S is not in general position, then some faces may have more than three edges, and it is common to complete the triangulation by triangulating each such face.) A straightforward consequence of the above deﬁnition is that the Delaunay triangulation is dual to the Voronoi diagram. For example, Figure 63.9(b) shows the overlay of these two structures in the plane.

s

p t r q (a)

(b)

FIGURE 63.9: (a) The Delaunay triangulation of a set of points and (b) its overlay with the Voronoi diagram.

Delaunay triangulations are widely used in practice, and they possess a number of useful properties. For example, among all triangulations of a planar point set the Delaunay triangulation maximizes the minimum angle. Also, in all dimensions, the Euclidean minimum

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63-11

spanning tree (deﬁned below) is a subgraph of the Delaunay triangulation. Proofs of these facts can be found in [31]. In the plane the Delaunay triangulation of a set of points has O(n) edges and O(n) faces. The above deﬁnition can be generalized to arbitrary dimensions. In dimension d, the Delaunay triangulation can have as many as Θ(nd/2 ) faces. However, it can be much smaller. In particular, Dwyer [34] has shown that in any ﬁxed dimension, if n points are drawn from a uniform distribution from within a unit ball, then the expected number of simplices is O(n). There is an interesting connection between Delaunay triangulations in dimension d and convex hulls in dimension d + 1. Consider the lifting map f : R2 → R3 deﬁned f (x, y) = (x, y, x2 + y 2 ). This projects points in the plane onto the paraboloid z = x2 + y 2 . Given a planar point set S, let S denote the set of points of R3 that results by applying this map to each point of S. Deﬁne the lower hull of S to be the set of faces whose outward pointing normal has a negative z coordinate. It can be shown that, when projected back to the plane, the edges of the lower convex hull of S are exactly the edges of the Delaunay triangulation of S. (See Figure 63.10.)

Project onto paraboloid

Compute lower convex hull

Project hull faces back to plane

FIGURE 63.10: The Delaunay triangulation can be computed by lifting the points to the paraboloid, computing the lower convex hull, and projecting back to the plane.

Although there exist algorithms specially designed for computing Delaunay triangulations, the above fact makes it possible to compute Delaunay triangulations in any dimension by computing convex hulls in the next higher dimension. There exist O(n log n) time algorithms for computing planar Delaunay triangulations, for example, based on divideand-conquer [70] and plane sweep [39]. Perhaps the most popular method is based on randomized incremental point insertion [45]. In dimension d ≥ 3, Delaunay triangulations can be computed in O(nd/2 ) time through randomized incremental point insertion [27].

63.3.3

Other Geometric Proximity Structures

The Delaunay triangulation is perhaps the best known example of a proximity structure. There are a number of related graph structures that are widely used in pattern recognition, learning, and other applications. Given a ﬁnite set S of points in d-dimensional Euclidean space, we can deﬁne a graph on these points by joining pairs of points that satisfy certain neighborhood properties. In this section we will consider a number of such neighborhood graphs.

© 2005 by Chapman & Hall/CRC

63-12

Handbook of Data Structures and Applications

Let us ﬁrst introduce some deﬁnitions. For p, q ∈ Rd let dist(p, q) denote the Euclidean distance from p to q. Given positive r ∈ R, let B(p, r) be the open ball consisting of points whose distance from point p is strictly less than r. Deﬁne the lune, denoted L(p, q), to be the intersection of two balls both of radius dist(p, q) centered at these points, that is, L(p, q) = B(p, dist(p, q)) ∩ B(q, dist(p, q)). The following geometric graphs are deﬁned for a set S consisting of n points in Rd . (See Figure 63.11.) Nearest Neighbor Graph (NNG): The directed graph containing an edge (p, q) if q is the nearest neighbor of p, that is, B(p, dist(p, q)) ∩ S = ∅. Euclidean Minimum Spanning Tree (EMST): This is an undirected spanning tree on S that minimizes the sum of the Euclidean edge lengths. Relative Neighborhood Graph (RNG): The undirected graph containing an edge (p, q) if there is no point r ∈ S that is simultaneously closer to p and q than dist(p, q) [74]. Equivalently, (p, q) is an edge if L(p, q) ∩ S = ∅. Gabriel Graph (GG): The undirected graph containing an edge (p, q) if the ball whose diameter is pq does not contain any other points of S [42], that is, if p + q dist(p, q) , ∩ S = ∅. B 2 2 Delaunay Graph (DT): The 1-skeleton (edges) of the Delaunay triangulation.

q p

p q

NNG

MST

RNG

GG

DT

FIGURE 63.11: Common geometric graphs on a point set.

These graphs form an interesting hierarchical relationship. If we think of each edge of an undirected graph as consisting of two directed edges, then we have the following hierarchical relationship, which was ﬁrst established in [74]. Also see [50]. NNG ⊆ MST ⊆ RNG ⊆ GG ⊆ DT. This holds in all ﬁnite dimensions and generalizes to Minkowski (Lm ) metrics, as well.

63.4

Nearest Neighbor Searching

Nearest neighbor searching is an important problem in a variety of applications, including knowledge discovery and data mining, pattern recognition and classiﬁcation, machine learning, data compression, multimedia databases, document retrieval, and statistics. We

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63-13

are given a set S of objects in some space to be preprocessed, so that given a query object q, the closest object (or objects) of S can be reported quickly. There are many ways in which to deﬁne the notion of similarity. Because the focus of this chapter is on geometric approaches, we shall assume that proximity is deﬁned in terms of the well known Euclidean distance. Most of the results to be presented below can be generalized to any Minkowski (or Lm ) metric, in which the distance between two points p and q is deﬁned to be distm (p, q) =

d

1/m |pi − qi |

m

i=1

where m ≥ 1 is a constant. The case m = 2 is the Euclidean distance, the case m = 1 is the Manhattan distance, and the limiting case m = ∞ is the max distance. In typical geometric applications the dimension d is assumed to be a ﬁxed constant. There has also been work on high dimensional proximity searching in spaces of arbitrarily high dimensions [49] and in arbitrary (nongeometric) metric spaces [23], which we shall not cover here. There are a number of natural extensions to the nearest neighbor problem as described above. One is to report the k nearest neighbors to the query point, for some given integer k. Another is to compute all the points lying within some given distance, that is, a range query in which the range is deﬁned by the distance function. Obviously, without any preprocessing whatsoever, the nearest neighbor search problem can be solved in O(n) time through simple brute-force search. A number of very simple methods have been proposed which assume minimal preprocessing. For example, points can be sorted according to their projection along a line, and the projected distances can be used as a method to prune points from consideration [40, 44, 54]. These methods are only marginally eﬀective, and provide signiﬁcant improvements over brute-force search only in very low dimensions. For uniformly distributed point sets, good expected case performance can be achieved by simple decompositions of space into a regular grid of hypercubes. Rivest [65] and later Cleary [28] provided analyses of these methods. Bentley, Weide, and Yao [17] also analyzed a grid-based method for distributions satisfying certain bounded-density assumptions. Intuitively, the points are bucketed q into grid cells, where the size of the grid cell is based on the expected distance to the nearest neighbor. To answer a query, the p grid cell containing the query point is located, and a spiral-like search working outwards from this cell is performed to identify nearby points. Suppose for example that q is the query point and p is its closest neighbor. Then all the grid cells overlapping a ball centered at q of radius dist(p, q) would be visited. Grids are easy to implement, since each bucket can be stored as a simple list of points, and the complete set of buckets can be arranged in a multi-dimensional array. Note that this may not be space eﬃcient, since it requires storage for empty cells. A more spaceeﬃcient method is to assign a hash code to each grid cell based on its location, and then store only the nonempty grid buckets in a hash table. In general, grid methods do not work well for nearest neighbor search unless the point distribution is roughly uniform. As will be discussed below, more sophisticated methods are needed to achieve good eﬃciency for nonuniformly distributed data.

© 2005 by Chapman & Hall/CRC

63-14

63.4.1

Handbook of Data Structures and Applications

Nearest Neighbor Searching through Point Location

One of the original motivations for the Voronoi diagram is nearest neighbor searching. By deﬁnition, the Voronoi diagram subdivides space into cells according to which site is the closest. So, in order to determine the closest site, it suﬃces to compute the Voronoi diagram and generate a point location data structure for the Voronoi diagram. In this way, nearest neighbor queries are reduced to point location queries. This provides an optimal O(n) space and O(log n) query time method for answering point location queries in the plane. Unfortunately, this solution does not generalize well to higher dimensions. The worst-case combinatorial complexity of the Voronoi diagram in dimension d grows as Θ(nd/2 ), and optimal point location data structures are not known to exist in higher dimensions.

63.4.2

K-d trees

Perhaps the most popular class of approaches to nearest neighbor searching involves some sort of hierarchical spatial subdivision. Let S denote the set of n points in Rd for which queries are to be answered. In such an approach, the entire space is subdivided into successively smaller regions, and the resulting hierarchy is represented by a rooted tree. Each node of the tree represents a region of space, called a cell. Implicitly, each node represents the subset of points of S that lie within its cell. The root of the tree is associated with the entire space and the entire point set S. For some arbitrary node u of the tree, if the number of points of S associated with u is less than some constant, then this node is declared to be a leaf of the tree. Otherwise, the cell associated with u is recursively subdivided into smaller (possibly overlapping) subcells according to some splitting rule. Then the associated points of S are distributed among these children according to which subcell they lie in. These subcells are then associated with the children of u in the tree. There are many ways in which to deﬁne such a subdivision. Perhaps the earliest and best known example is that of the k-d tree data structure. Bentley [16] introduced the k-d tree data structure (or kd-tree) as a practical general-purpose data structure for many types of geometric retrieval problems. Although it is not the asymptotically most eﬃcient solution for these problems, its ﬂexibility makes it a popular choice for implementation. The cells of a k-d tree are axis-aligned hyperrectangles. Each internal node is associated with an axis-orthogonal splitting hyperplane. This hyperplane splits the rectangular cell into two rectangular subcells, each of which is associated with one of the two children. An example is shown in Figure 63.12.

p4

p5

p10

p9 p2 p3 p1

p

8

p6 p7

p3 p1

p2

p4

p5

p8 p6

p9

p10

p7

FIGURE 63.12: An example of a k-d tree of a set of points in the plane, showing both the associated spatial subdivision (left) and the binary tree structure (right).

The choice of the splitting hyperplane is an important issue in the implementation of the

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63-15

k-d tree. For the purpose of nearest neighbor searching, a good split is one that divides the points into subsets of similar cardinalities and which produces cells that are not too skinny, that is, the ratio between the longest and shortest sides is bounded. However, it is not always possible to achieve these goals. A simple and commonly used method is to cycle through the various coordinate axes (that is, splitting along x, then y, then z, then back to x, and so on). Each time the split is made through the median coordinate along the splitting dimension [31, 66]. Friedman, Bentley and Finkel [41] suggested the following method, which is more sensitive to the data distribution. First, compute the minimum axisaligned bounding box for the set of points associated with the current cell. Next choose the splitting axis to be the one that is parallel to the longest side of this box. Finally, split the points by a hyperplane that is orthogonal to this axis, and which splits the points into two sets of equal size. A number of other splitting rules have been proposed for k-d trees, including the sliding midpoint rule by Arya and Fu [3] and Maneewongvatana and Mount [57], variance minimization by White and Jain [76], and methods by Silva Filho [37] and Sproull [73]. We will discuss other subdivision methods in the next section as well. It is possible to construct the k-d tree of an n-element point set in O(n log n) time by a simple top-down recursive procedure. The process involves determining the splitting axis and the splitting coordinate along this axis, and then partitioning the point set about this coordinate. If the splitting rule partitions the point set about its median coordinate then it suﬃces to compute the median by any linear-time algorithm for computing medians [30]. Some splitting methods may not evenly partition the point set. In the worst case this can lead to quadratic construction time. Vaidya showed that it is possible to achieve O(n log n) construction time, even when unbalanced splitting takes place [75]. The total space requirements are O(n) for the tree itself.

p4

p10

p5 p9

q p2 p3 p1

p8

p6 p7

p3 p1

p2

p4

p5

p8 p6

p7

p9

p10 q

FIGURE 63.13: Nearest neighbor search in a k-d tree. The point p10 is the initial closest, and only the shaded cells and nodes are visited. The ﬁnal answer is p8 .

Given a query point q, a nearest neighbor search is performed by the following recursive algorithm [41]. Throughout, the algorithm maintains the closest point to q encountered so far in the search, and the distance to this closest point. As the nodes of the tree are traversed, the algorithm maintains the d-dimensional hyperrectangular cell associated with each node. (This is updated incrementally as the tree is traversed.) When the search arrives at a leaf node, it computes the distance from q to the associated point(s) of this node, and updates the closest point if necessary. (See Figure 63.13.) Otherwise, when it arrives at an internal node, it ﬁrst computes the distance from the query point to the associated cell. If this distance is greater than the distance to the closest point so far, the search returns immediately, since the subtree rooted at this node cannot provide a closer point. Otherwise, it is determined which side of the splitting hyperplane contains the query point. First, the

© 2005 by Chapman & Hall/CRC

63-16

Handbook of Data Structures and Applications

closer child is visited and then the farther child. A somewhat more intelligent variant of this method, called priority search, involves storing the unvisited nodes in a priority queue, sorted according to the distance from the query point to the associated cell, and then processes the nodes in increasing order of distance from the query point [9].

63.4.3

Other Approaches to Nearest Neighbor Searching

The k-d tree is but one example of a general class of nearest neighbor search structures that are based on hierarchical space decomposition. A good survey of methods from database literature was given by B¨ ohm, Berchtold, and Keim [20]. These include the R-tree [46] and its variants, the R∗ -tree [15], the R+ -tree [69], and the X-tree [18], which are all based on recursively decomposing space into (possibly overlapping) hyperrectangles. (See For the cases studied, the X-tree is reported to Chapter 21 for further information.) have the best performance for nearest neighbor searching in high dimensional spaces [20]. The SS-tree [76] is based on subdividing space using (possibly overlapping) hyperspheres rather than rectangles. The SR-tree [51] uses the intersection of an enclosing rectangle and enclosing sphere to represent a cell. The TV-tree [56] applies a novel approach of considering projections of the data set onto higher dimensional subspaces at successively deeper levels in the search tree. A number of algorithms for nearest neighbor searching have been proposed in the algorithms and computational geometry literature. Higher dimensional solutions with sublinear worst-case performance were considered by Yao and Yao [77]. Clarkson [25] showed that queries could be answered in O(log n) time with O(nd/2+δ ) space, for any δ > 0. The O-notation hides constant factors that are exponential in d. Agarwal and Matouˇsek [2] generalized this by providing a tradeoﬀ between space and query time. Meiser [59] showed that queries could be answered in O(d5 log n) time and O(nd+δ ) space, for any δ > 0, thus showing that exponential factors in query time could be eliminated by using suﬃcient space.

63.4.4

Approximate Nearest Neighbor Searching

In any ﬁxed dimensions greater than two, no method for exact nearest neighbor searching is known that achieves the simultaneous goals of roughly linear space and logarithmic query time. For methods achieving roughly linear space, the constant factors hidden in the asymptotic running time grow at least as fast as 2d (depending on the metric). Arya et al. [11] showed that if n is not signiﬁcantly larger than 2d , then boundary eﬀects decrease this exponential dimensional dependence. Nonetheless, the so called “curse of dimensionality” is a signiﬁcant impediment to computing nearest neighbors eﬃciently in high dimensional spaces. This suggests the idea of computing nearest neighbors approximately. Consider a set of points S and a query point q. For any > 0, we say that a point p ∈ S is an -approximate nearest neighbor of q if dist(p, q) ≤ (1 + )dist(p∗ , q), where p∗ is the true nearest neighbor of q in S. The approximate nearest neighbor problem was ﬁrst considered by Bern [19]. He proposed a data structure that achieved a ﬁxed approximation factor depending on dimension. Arya and Mount [10] proposed a randomized data structure that achieves polylogarithmic query time in the expected case, and nearly linear space. Their approach was based on a combination of the notion of neighborhood graphs, as described in Section 63.3.3, and skip lists. In their algorithm the approximation error factor is an arbitrary positive constant, which is given at preprocessing time.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63-17

Arya et al. [12] proposed a hierarchical spatial subdivision data structure, called the BBD-tree. This structure has the nice features of having O(n) size, O(log n) depth, and each cell has bounded aspect ratio, that is, the ratio between its longest and shortest side is bounded. They achieved this by augmenting the axis-aligned splitting operation of the k-d tree (see Figure 63.14(a)) with an additional subdivision operation called shrinking (see Figure 63.14(b)). A shrinking node is associated with an axis-aligned rectangle, and the two children correspond to the portions of space lying inside and outside of this rectangle, respectively. The resulting cells are either axis-aligned hyperrectangles, or the set-theoretic diﬀerence of two axis-aligned hyperrectangles. They showed that, in all ﬁxed dimensions d and for > 0, it is possible to answer -nearest neighbor queries in O(log n) time using the BBD-tree. The hidden asymptotic constants in query time grow as (1/)d .

split

shrink

inner

left

right

(a)

outer (b)

FIGURE 63.14: Splitting nodes (a) and shrinking nodes (b) in a BBD-tree.

Duncan et al. [33] proposed an alternative structure, called the BAR tree, which achieves all of these combinatorial properties and has convex cells. The BAR tree achieves this by using cutting planes that are not necessarily axis-aligned. Clarkson [26] and Chan [22] presented data structures that achieved better dependency in the query time. In particular, they showed that queries could be answered in O((1/)d/2 log n) time.

63.4.5

Approximate Voronoi Diagrams

As mentioned in Section 63.4.1 it is possible to answer nearest neighbor queries by applying a point location query to the Voronoi diagram. However, this approach does not generalize well to higher dimensions, because of the rapid growth rate of the Voronoi diagram and the lack of good point location structures in dimension higher than two. Har-Peled [47] proposed a method to overcome these problems. Given an error bound > 0, an approximate Voronoi diagram (AVD) of a point set S is deﬁned to be a partition of space into cells, where each cell c is associated with a representative rc ∈ S, such that rc is an -nearest neighbor for all the points in c [47]. Arya and Malamatos [4] generalized this by allowing up to some given number t ≥ 1 representatives to be stored with each cell, subject to the requirement that for any point in the cell, one of these t representatives is an -nearest neighbor. Such a decomposition is called a (t, )-AVD. (See Figure 63.15.) Of particular interest are AVDs that are constructed from hierarchical spatial decompositions, such as quadtrees and their variants, since such structures support fast point location in all dimensions. This yields a very simple method for performing approximate nearest neighbor searching. In particular, a tree descent determines the leaf cell containing the query point and then the closest of the t representatives is reported. Har-Peled [47] showed that it is possible to construct a (1, ) AVD in which the number of

© 2005 by Chapman & Hall/CRC

63-18

Handbook of Data Structures and Applications ab

abc

bcf

abc abc cd

a

ad

c

bc

cf

c

cef

ce

acd

ad

f

f

b

ad

f

ef

ef

ef

ef

eg

ef

ef

eg

egj

e cde

cde e

eg

deg eg adi

d

d

dgh

dgh

g

gj

g dhi

dhi

gh

ghj

h i

ih

hj

i

j

j

FIGURE 63.15: A (3, 0)-AVD implemented as a quadtree subdivision for the set {a, b, . . . , j}. Each cell is labeled with its representatives. The Voronoi diagram is shown for reference. leaf cells is O((n/d )(log n) log(n/)). Arya and Malamatos [4] and later Arya, Malamatos, and Mount [8] improved these results by showing how to construct more space-eﬃcient AVDs. In all constant dimensions d, their results yield a data structure of O(n) space (including the space for representatives) that can answer -nearest neighbor queries in O(log n + (1/)(d−1)/2 ) time. This is the best asymptotic result known for approximate nearest neighbor searching in ﬁxed dimensional spaces.

63.5

Sources and Related Material

General information regarding the topics presented in the chapter can be found in standard texts on computational geometry, including those by Preparata and Shamos [64], Edelsbrunner [35], Mulmuley [61], de Berg et al. [31], and Boissonnat and Yvinec [21] as well as Samet’s book on spatial data structures [66]. Further information on point location can be found in a survey paper written by Snoeyink [72]. For information on Voronoi diagrams see the book by Okabe, Boots and Sugihara [62] or surveys by Aurenhammer [13], Aurenhammer and Klein [14], and Fortune [38]. For further information on geometric graphs see the survey by O’Rourke and Toussaint [63]. Further information on nearest neighbor searching can be found in surveys by B¨ ohm et al. [20], Indyk [49], and Chavez et al. [23].

Acknowledgments The work of the ﬁrst author was supported in part by a grant from the Hong Kong Research Grants Council (HKUST6229/00E and HKUST6080/01E). The work of the second author was supported in part by National Science Foundation grant number CCR-0098151.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63-19

References [1] U. Adamy and R. Seidel. Planar point location close to the information-theoretic lower bound. In Proc. 9th ACM-SIAM Sympos. Discrete Algorithms, 1998. [2] P. K. Agarwal and J. Matouˇsek. Ray shooting and parametric search. SIAM J. Comput., 22(4):794–806, 1993. [3] S. Arya and H. Y. Fu. Expected-case complexity of approximate nearest neighbor searching. SIAM J. of Comput., 32:793–815, 2003. [4] S. Arya and T. Malamatos. Linear-size approximate Voronoi diagrams. In Proc. 13th ACM-SIAM Sympos. Discrete Algorithms, pages 147–155, 2002. [5] S. Arya, T. Malamatos, and D. M. Mount. Nearly optimal expected-case planar point location. In Proc. 41 Annu. IEEE Sympos. Found. Comput. Sci., pages 208–218, 2000. [6] S. Arya, T. Malamatos, and D. M. Mount. Entropy-preserving cuttings and spaceeﬃcient planar point location. In Proc. 12th ACM-SIAM Sympos. Discrete Algorithms, 2001. 256–261. [7] S. Arya, T. Malamatos, and D. M. Mount. A simple entropy-based algorithm for planar point location. In Proc. 12th ACM-SIAM Sympos. Discrete Algorithms, pages 262–268, 2001. [8] S. Arya, T. Malamatos, and D. M. Mount. Space-eﬃcient approximate Voronoi diagrams. In Proc. 34th Annual ACM Sympos. Theory Comput., pages 721–730, 2002. [9] S. Arya and D. M. Mount. Algorithms for fast vector quantization. In Data Compression Conference, pages 381–390. IEEE Press, 1993. [10] S. Arya and D. M. Mount. Approximate nearest neighbor queries in ﬁxed dimensions. In Proc. 4th ACM-SIAM Sympos. Discrete Algorithms, pages 271–280, 1993. [11] S. Arya, D. M. Mount, and O. Narayan. Accounting for boundary eﬀects in nearestneighbor searching. Discrete Comput. Geom., 16:155–176, 1996. [12] S. Arya, D. M. Mount, N. S. Netanyahu, R. Silverman, and A. Wu. An optimal algorithm for approximate nearest neighbor searching in ﬁxed dimensions. J. ACM, 45:891–923, 1998. [13] F. Aurenhammer. Voronoi diagrams: A survey of a fundamental geometric data structure. ACM Comput. Surv., 23(3):345–405, September 1991. [14] F. Aurenhammer and R. Klein. Voronoi diagrams. In J.-R. Sack and J. Urrutia, editors, Handbook of Computational Geometry, pages 201–290. Elsevier Science Publishers B.V. North-Holland, Amsterdam, 2000. [15] N. Beckmann, H.-P. Kriegel, R. Schneider, and B. Seeger. The R∗ -tree: An eﬃcient and robust access method for points and rectangles. In Proc. ACM SIGMOD Conf. on Management of Data, pages 322–331, 1990. [16] J. L. Bentley. Multidimensional binary search trees used for associative searching. Commun. ACM, 18(9):509–517, September 1975. [17] J. L. Bentley, B. W. Weide, and A. C. Yao. Optimal expected-time algorithms for closest point problems. ACM Trans. on Math. Softw., 6(4):563–580, 1980. [18] S. Berchtold, D. A. Keim, and H.-P. Kriegel. The X-tree: An index structure for high-dimensional data. In Proc. 22nd VLDB Conference, pages 28–39, 1996. [19] M. Bern. Approximate closest-point queries in high dimensions. Inform. Process. Lett., 45:95–99, 1993. [20] C. B¨ ohm, S. Berchtold, and D. A. Keim. Searching in high-dimensional spaces: Index structures for improving the performance of multimedia databases. ACM Comput. Surveys, 33:322–373, 2001. [21] J.-D. Boissonnat and M. Yvinec. Algorithmic Geometry. Cambridge University Press,

© 2005 by Chapman & Hall/CRC

63-20

Handbook of Data Structures and Applications

UK, 1998. Translated by H. Br¨ onnimann. [22] T. Chan. Approximate nearest neighbor queries revisited. In Proc. 13th Annu. ACM Sympos. Comput. Geom., pages 352–358, 1997. [23] E. Chavez, G. Navarro, R. A. Baeza-Yates, and J. L. Marroquin. Searching in metric spaces. ACM Comput. Surveys, 33:273–321, 2001. [24] B. Chazelle and L. J. Guibas. Fractional cascading: I. A data structuring technique. Algorithmica, 1(3):133–162, 1986. [25] K. L. Clarkson. A randomized algorithm for closest-point queries. SIAM J. Comput., 17(4):830–847, 1988. [26] K. L. Clarkson. An algorithm for approximate closest-point queries. In Proc. 10th Annu. ACM Sympos. Comput. Geom., pages 160–164, 1994. [27] K. L. Clarkson and P. W. Shor. Applications of random sampling in computational geometry II. Discrete Comput. Geom., 4:387–421, 1989. [28] J. G. Cleary. Analysis of an algorithm for ﬁnding nearest neighbors in Euclidean space. ACM Trans. on Math. Softw., 5(2):183–192, 1979. [29] R. Cole. Searching and storing similar lists. J. Algorithms, 7:202–220, 1986. [30] T. H. Cormen, C. E. Leiserson, R. L. Rivest, and C. Stein. Introduction to Algorithms. MIT Press, Cambridge, MA, 2nd edition, 2001. [31] M. de Berg, M. van Kreveld, M. Overmars, and O. Schwarzkopf. Computational Geometry: Algorithms and Applications. Springer-Verlag, Berlin, Germany, 2nd edition, 2000. [32] R. O. Duda and P. E. Hart. Pattern Classiﬁcation and Scene Analysis. WileyInterscience, New York, 1973. [33] C. A. Duncan, M. T. Goodrich, and S. Kobourov. Balanced aspect ratio trees: Combining the advantages of k-d trees and octrees. J. Algorithms, 38:303–333, 2001. [34] R. A. Dwyer. Higher-dimensional Voronoi diagrams in linear expected time. Discrete Comput. Geom., 6:343–367, 1991. [35] H. Edelsbrunner. Algorithms in Combinatorial Geometry, volume 10 of EATCS Monographs on Theoretical Computer Science. Springer-Verlag, Heidelberg, West Germany, 1987. [36] H. Edelsbrunner, L. J. Guibas, and J. Stolﬁ. Optimal point location in a monotone subdivision. SIAM J. Comput., 15(2):317–340, 1986. [37] Y. V. Silva Filho. Optimal choice of discriminators in a balanced K-D binary search tree. Inform. Proc. Lett., 13:67–70, 1981. [38] S. Fortune. Voronoi diagrams and Delaunay triangulations. In Jacob E. Goodman and Joseph O’Rourke, editors, Handbook of Discrete and Computational Geometry, chapter 20, pages 377–388. CRC Press LLC, Boca Raton, FL, 1997. [39] S. J. Fortune. A sweepline algorithm for Voronoi diagrams. Algorithmica, 2:153–174, 1987. [40] J. H. Friedman, F. Baskett, and L. J. Shustek. An algorithm for ﬁnding nearest neighbors. IEEE Trans. Comput., C-24(10):1000–1006, 1975. [41] J. H. Friedman, J. L. Bentley, and R. A. Finkel. An algorithm for ﬁnding best matches in logarithmic expected time. ACM Trans. Math. Softw., 3:209–226, 1977. [42] K. R. Gabriel and R. R. Sokal. A new statistical approach to geographic variation analysis. Systematic Zoology, 18:259–278, 1969. [43] M. T. Goodrich, M. Orletsky, and K. Ramaiyer. Methods for achieving fast query times in point location data structures. In Proc. 8th ACM-SIAM Sympos. Discrete Algorithms, pages 757–766, 1997. [44] L. Guan and M. Kamel. Equal-average hyperplane partitioning method for vector quantization of image data. Pattern Recogn. Lett., 13:693–699, 1992.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Proximity and Location

63-21

[45] L. J. Guibas, D. E. Knuth, and M. Sharir. Randomized incremental construction of Delaunay and Voronoi diagrams. Algorithmica, 7:381–413, 1992. [46] A. Guttman. R-trees: A dynamic index structure for spatial searching. In Proc. ACM SIGMOD Conf. on Management of Data, pages 47–57, 1984. [47] S. Har-Peled. A replacement for Voronoi diagrams of near linear size. In Proc. 42 Annu. IEEE Sympos. Found. Comput. Sci., pages 94–103, 2001. [48] J. Iacono. Optimal planar point location. In Proc. 12th ACM-SIAM Sympos. Discrete Algorithms, pages 340–341, 2001. [49] P. Indyk. Nearest neighbors in high-dimensional spaces. In Jacob E. Goodman and Joseph O’Rourke, editors, Handbook of Discrete and Computational Geometry. CRC Press LLC, Boca Raton, FL, 2004. (To appear). [50] J. W. Jaromczyk and G. T. Toussaint. Relative neighborhood graphs and their relatives. Proc. IEEE, 80(9):1502–1517, September 1992. [51] N. Katayama and S. Satoh. The SR-tree: An index structure for high-dimensional nearest neighbor queries. In Proc. ACM SIGMOD Conf. on Management of Data, pages 369–380, 1997. [52] D. G. Kirkpatrick. Optimal search in planar subdivisions. SIAM J. Comput., 12(1):28–35, 1983. [53] D. E. Knuth. Sorting and Searching, volume 3 of The Art of Computer Programming. Addison-Wesley, Reading, MA, second edition, 1998. [54] C.-H. Lee and L.-H. Chen. Fast closest codeword search algorithm for vector quantisation. IEE Proc.-Vis. Image Signal Process., 141:143–148, 1994. [55] D. T. Lee and F. P. Preparata. Location of a point in a planar subdivision and its applications. SIAM J. Comput., 6(3):594–606, 1977. [56] K. I. Lin, H. V. Jagadish, and C. Faloutsos. The TV-tree: An index structure for high-dimensional data. VLDB Journal, 3(4):517–542, 1994. [57] S. Maneewongvatana and D. M. Mount. Analysis of approximate nearest neighbor searching with clustered point sets. In M. H. Goldwasser, C. C. McGeoch, and D. S. Johnson, editors, Data Structures, Near Neighbor Searches, and Methodology, volume 59 of DIMACS Series in Discrete Mathematics and Theoretical Computer Science, pages 105–123. American Mathematics Society, 2002. [58] K. Mehlhorn. Best possible bounds on the weighted path length of optimum binary search trees. SIAM J. Comput., 6:235–239, 1977. [59] S. Meiser. Point location in arrangements of hyperplanes. Information and Computation, 106(2):286–303, 1993. [60] K. Mulmuley. A fast planar partition algorithm, I. J. Symbolic Comput., 10(3–4):253– 280, 1990. [61] K. Mulmuley. Computational Geometry: An Introduction Through Randomized Algorithms. Prentice Hall, Englewood Cliﬀs, NJ, 1993. [62] A. Okabe, B. Boots, and K. Sugihara. Spatial Tessellations: Concepts and Applications of Voronoi Diagrams. John Wiley & Sons, Chichester, UK, 1992. [63] J. O’Rourke and G. T. Toussaint. Pattern recognition. In Jacob E. Goodman and Joseph O’Rourke, editors, Handbook of Discrete and Computational Geometry, chapter 43, pages 797–814. CRC Press LLC, Boca Raton, FL, 1997. [64] F. P. Preparata and M. I. Shamos. Computational Geometry: An Introduction. Springer-Verlag, 3rd edition, October 1990. [65] R. L. Rivest. On the optimality of Elias’s algorithm for performing best-match searches. In Information Processing, pages 678–681. North Holland Publishing Company, 1974. [66] H. Samet. The Design and Analysis of Spatial Data Structures. Addison-Wesley, Reading, MA, 1990.

© 2005 by Chapman & Hall/CRC

63-22

Handbook of Data Structures and Applications

[67] N. Sarnak and R. E. Tarjan. Planar point location using persistent search trees. Commun. ACM, 29(7):669–679, July 1986. [68] R. Seidel. A simple and fast incremental randomized algorithm for computing trapezoidal decompositions and for triangulating polygons. Comput. Geom. Theory Appl., 1(1):51–64, 1991. [69] T. Sellis, N. Roussopoulos, and C. Faloutsos. The R+ -tree: A dynamic index for multi-dimensional objects. In Proc. 13th VLDB Conference, pages 507–517, 1987. [70] M. I. Shamos and D. Hoey. Closest-point problems. In Proc. 16th Annu. IEEE Sympos. Found. Comput. Sci., pages 151–162, 1975. [71] C. E. Shannon. A mathematical theory of communication. Bell Sys. Tech. Journal, 27:379–423, 623–656, 1948. [72] J. Snoeyink. Point location. In Jacob E. Goodman and Joseph O’Rourke, editors, Handbook of Discrete and Computational Geometry, chapter 30, pages 559–574. CRC Press LLC, Boca Raton, FL, 1997. [73] R. F. Sproull. Reﬁnements to nearest-neighbor searching in k-dimensional trees. Algorithmica, 6(4):579–589, 1991. [74] G. T. Toussaint. The relative neighbourhood graph of a ﬁnite planar set. Pattern Recogn., 12:261–268, 1980. [75] P. M. Vaidya. An O(n log n) algorithm for the all-nearest-neighbors problem. Discrete Comput. Geom., 4:101–115, 1989. [76] D. A. White and R. Jain. Similarity indexing with the SS-tree. In Proc. 12th IEEE Internat. Conf. Data Engineering, pages 516–523, 1996. [77] A. C. Yao and F. F. Yao. A general approach to d-dimensional geometric queries. In Proc. 17th Ann. ACM Sympos. Theory Comput., pages 163–168, 1985.

© 2005 by Chapman & Hall/CRC

64 Computational Geometry: Generalized Intersection Searching 64.1

Geometric Intersection Searching Problems . . . .

64-1

Generalized Intersection Searching

64.2 International Institute of Information Technology

64.3

University of Minnesota

Carleton University

64.1

64-3

Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

64-4

A Transformation-Based Approach • A Sparsiﬁcation-Based Approach • A Persistence-Based Approach • A General Approach for Reporting Problems • Adding Range Restrictions

Ravi Janardan Michiel Smid

Summary of Known Results . . . . . . . . . . . . . . . . . . . . . . Axes-Parallel Objects • Arbitrarily-Oriented Objects • Problems on the Grid • Single-Shot Problems

Prosenjit Gupta

64.4 64.5

Conclusion and Future Directions . . . . . . . . . . . . . . . 64-15 Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-16

Geometric Intersection Searching Problems

Problems arising in diverse areas, such as VLSI layout design (Chapter 52), database querying (Chapter 60), robotics, and computer graphics (Chapter 54) can often be formulated as geometric intersection searching problems. In a generic instance of such a problem, a set, S, of geometric objects is to be preprocessed into a suitable data structure so that given a query object, q, we can answer eﬃciently questions regarding the intersection of q with the objects in S. The problem comes in four versions, depending on whether we want to report the intersected objects or simply count their number—the reporting version and the counting version, respectively—and whether S remains ﬁxed or changes through insertion and deletion of objects—the static version and the dynamic version, respectively. In the dynamic version, which arises very often owing to the highly interactive nature of the above-mentioned applications, we wish to perform the updates more eﬃciently than simply recomputing the data structure from scratch after each update, while simultaneously maintaining fast query response times. We call these problems standard intersection searching problems in order to distinguish them from the generalized intersection searching problems that are the focus of this chapter. Due to their numerous applications, standard intersection searching problems have been the subject of much study and eﬃcient solutions have been devised for many of them (see, for instance, [4, 13] and the references therein). The eﬃciency of a standard intersection searching algorithm is measured by the space used by the data structure, the query time, and, in the dynamic setting, the update time. In a counting problem, these are expressed as a function of the input size n (i.e., the size of S); in a reporting problem, the space and update time are expressed as a function of n,

64-1

© 2005 by Chapman & Hall/CRC

64-2

Handbook of Data Structures and Applications

whereas the query time is expressed as a function of both n and the output size k (i.e., the number of intersected objects) and is typically of the form O(f (n) + k) or O(f (n) + k · g(n)), for some functions f and g. Such a query time is called output-sensitive.

64.1.1

Generalized Intersection Searching

In many applications, a more general form of intersection searching arises: Here the objects in S come aggregated in disjoint groups and of interest are questions regarding the intersection of q with the groups rather than with the objects. (q intersects a group if and only if it intersects some object in the group.) In our discussion, it will be convenient to associate with each group a diﬀerent color and imagine that all the objects in the group have that color. Then, in the generalized reporting (resp., generalized counting) problem, we want to report (resp., count) the distinct colors intersected by q; in the dynamic setting, an object of some (possibly new) color is inserted in S or an object in S is deleted. Note that the generalized problem reduces to the standard one when each color class has cardinality 1. We give two examples of such generalized problems: Consider a database of mutual funds which contains for each fund its annual total return and its beta (a real number measuring the fund’s volatility). Thus each fund can be represented as a point in two dimensions. Moreover, funds are aggregated into groups according to the fund family they belong to. A typical query is to determine the families that oﬀer funds whose total return is between, say, 15% and 20%, and whose beta is between, say, 0.9 and 1.1. This is an instance of the generalized 2-dimensional range searching problem. The output of this query enables a potential investor to initially narrow his/her search to a few families instead of having to plow through dozens of individual funds (all from the same small set of families) that meet these criteria. As another example, in the Manhattan layout of a VLSI chip, the wires (line segments) can be grouped naturally according to the circuits they belong to. A problem of interest to the designer is determining which circuits (rather than wires) become electrically connected when a new wire is added. This is an instance of the generalized orthogonal segment intersection searching problem. One approach to solving a generalized problem is to try to take advantage of solutions known for the corresponding standard problem. For instance, we can solve a generalized reporting problem by ﬁrst determining the objects intersected by q (a standard reporting problem) and then reading oﬀ the distinct colors. However, the query time can be very high since q could intersect Ω(n) objects but only O(1) distinct colors. For a generalized reporting problem, we seek query times that are sensitive to the number, i, of distinct colors intersected, typically of the form O(f (n) + i) or O(f (n) + i · g(n)), where f and g are polylogarithmic. (This is attainable using the approach just described if each color class has cardinality O(1). On the other hand, if there are only O(1) diﬀerent color classes, we could simply run a standard algorithm on each color class in turn, stopping as soon as an intersection is found and reporting the corresponding color. The real challenge is when the number of color classes and the cardinalities of the color classes are not constants, but rather are (unknown) functions of n; throughout, we will assume this to be the case.) For a generalized counting problem, the situation is worse; it is not even clear how one can extract the answer for such a problem from the answer (a mere count) to the corresponding standard problem. One could, of course, solve the corresponding reporting problem and then count the colors, but this is not eﬃcient. Thus it is clear that diﬀerent techniques are needed. In this chapter, we describe the research that has been conducted over the past few years on generalized intersection searching problems. We begin with a brief review of known results and then discuss a variety of techniques for these problems. For each technique,

© 2005 by Chapman & Hall/CRC

Computational Geometry: Generalized Intersection Searching

64-3

we give illustrative examples and provide pointers to related work. We conclude with a discussion of possible directions for further research.

64.2

Summary of Known Results

Generalized intersection searching problems were introduced by Janardan and Lopez in [23]. Subsequent work in this area may be found in [2, 3, 6–8, 16, 18–22, 29]. (Some of these results are also reported in two Ph.D. theses [17, 30].) In this section, we give a broad overview of the work on these problems to date; details may be found in the cited references.

64.2.1

Axes-Parallel Objects

In [23], eﬃcient solutions were given for several generalized reporting problems, where the input objects and the query were axes-parallel. Examples of such input/query pairs considered include: points/interval in R1 ; line segments/segment, points/rectangle, and rectangles/rectangle, all in R2 ; and rectangles/points in Rd , where d ≥ 2 is a constant. Several of these results were further extended in [18] to include counting and/or dynamic reporting, and new results were presented for input/query pairs such as intervals/interval in R1 , points/quadrant in R2 , and points/rectangle in R3 . Furthermore, a new type of counting problem, called a type-2 counting problem was also introduced, where the goal was to count for each color intersected the number of objects of that color that are intersected. In [6], improved solutions were given for counting and/or reporting problems involving points/interval in R1 , points/rectangle in R2 , and line segments/segment in R2 .

64.2.2

Arbitrarily-Oriented Objects

Eﬃcient solutions were given in [23] for generalized reporting on non-intersecting line segments using a query line segment. Special, but interesting, cases of intersecting line segments, such as when each color class forms a polygon or a connected component, were considered in [3]. Eﬃcient solutions were given in [19] for input/query pairs consisting of points/halfspace in Rd , points/fat-triangle, and fat-triangles/point in R2 . (A fat-triangle is a triangle where each internal angle is at least a user-speciﬁed constant, hence “wellshaped”.) Some of these results were improved subsequently in [6]. In [20], alternative bounds were obtained for the fat-triangle problems within the framework of a general technique for adding range restriction capability to a generalized data structure. Results were presented in [8] for querying, with a polygon, a set of polygons whose sides are oriented in at most a constant number of diﬀerent directions, with a polygon. In [30], a general method was given for querying intersecting line segments with a segment and for querying points in Rd with a halfspace or a simplex. Generalized problems involving various combinations of circular objects (circles, discs, annuli) and points, lines, and line segments were considered in [21].

64.2.3

Problems on the Grid

Problems involving document retrieval or string manipulation can often be cast in the framework of generalized intersection searching. For example, in the context of document retrieval, the following problem (among others) was considered in [29]: Preprocess an array of colored non-negative integers (i.e., points on the 1-dimensional grid) such that, given two indices into the array, each distinct color for which there is a pair of points in the

© 2005 by Chapman & Hall/CRC

64-4

Handbook of Data Structures and Applications

index range at distance less than a speciﬁed constant can be reported eﬃciently. In the context of substring indexing, the following problem was considered in [16]: Preprocess a set of colored points on the 1-dimensional grid, so that given two non-overlapping intervals, the list of distinct colors that occur in their intersection can be reported eﬃciently. I/O eﬃcient algorithms were given in the standard external memory model [31] for this problem. Other grid-related work in this area includes [2], where eﬃcient solutions were given for the points/rectangle and rectangles/point problems, under the condition that the input and query objects lie on a d-dimensional grid.

64.2.4

Single-Shot Problems

In this class of problems, we are given a collection of geometric objects and the goal is to report all pairs that intersect. Note that there is no query object as such here and no notion of preprocessing the input. As an example, suppose that we are given a set of convex polygons with a total of n vertices in R2 , and we wish to report or count all pairs that intersect, with the goal of doing this in time proportional to the number of intersecting pairs (i.e., output-sensitively). If the number of polygons and their sizes are both functions of n (instead of one or the other being a constant), then, as discussed in [22], standard methods (e.g., testing each pair of polygons or computing all boundary intersections and polygon containments in the input) are ineﬃcient. In [22], an eﬃcient and output-sensitive algorithm was given for this problem. Each polygon was assigned a color and then decomposed into simpler elements, i.e., trapezoids, of the same color. The problem then became one of reporting all distinct color pairs (c1 , c2 ) such that a trapezoid of color c1 intersects one of color c2 . An improved algorithm was given subsequently in [1] for both R2 and R3 . Other related work on such colored single-shot problems may be found in [7].

64.3

Techniques

We describe in some detail ﬁve main techniques that have emerged for generalized intersection searching over the past few years. Brieﬂy, these include: an approach based on a geometric transformation, an approach based on generating a sparse representation of the input, an approach based on persistent data structures, a generic method that is applicable to any reporting problem, and an approach for searching on a subset of the input satisfying a speciﬁed range restriction. We illustrate each method with examples.

64.3.1

A Transformation-Based Approach

We ﬁrst illustrate a transformation-based approach for the reporting and counting problems, which converts the original generalized reporting/counting problem to an instance of a related standard reporting/counting problem on which eﬃcient known solutions can be brought to bear. We illustrate this approach by considering the generalized 1-dimensional range searching problem. Let S be a set of n colored points on the x-axis. We show how to preprocess S so that for any query interval q, we can solve eﬃciently the dynamic reporting problem, the static and dynamic counting problems, and the static type-2 counting problem. The solutions for the dynamic reporting problem and the static and dynamic counting problems are from [18]. The type-2 counting solution is from [6]. We ﬁrst describe the transformation. For each color c, we sort the distinct points of that color by increasing x-coordinate. For each point p of color c, let pred (p) be its predecessor of color c in the sorted order; for the leftmost point of color c, we take the predecessor to

© 2005 by Chapman & Hall/CRC

Computational Geometry: Generalized Intersection Searching

64-5

be the point −∞. We then map p to the point p = (p, pred (p)) in the plane and associate with it the color c. Let S be the resulting set of points. Given a query interval q = [l, r], we map it to the grounded rectangle q = [l, r] × (−∞, l). LEMMA 64.1 There is a point of color c in S that is in q = [l, r] if and only if there is a point of color c in S that is in q = [l, r] × (−∞, l). Moreover, if there is a point of color c in q , then this point is unique.

Let p be a c-colored point in q , where p = (p, pred (p)) for some c-colored point p ∈ S. Since p is in [l, r] × (−∞, l), it is clear that l ≤ p ≤ r and so p ∈ [l, r]. For the converse, let p be the leftmost point of color c in [l, r]. Thus l ≤ p ≤ r and since pred (p) ∈ [l, r], we have l > pred (p). It follows that p = (p, pred (p)) is in [l, r] × (−∞, l). We prove that p is the only point of color c in q . Suppose for a contradiction that t = (t, pred (t)) is another point of color c in q . Thus we have l ≤ t ≤ r. Since t > p, we also have pred (t) ≥ p ≥ l. Thus t = (t, pred (t)) cannot lie in q —a contradiction. Proof

Lemma 64.1 implies that we can solve the generalized 1-dimensional range reporting (resp., counting) problem by simply reporting the points in q (resp., counting the number of points in q ), without regard to colors. In other words, we have reduced the generalized reporting (resp., counting) problem to the standard grounded range reporting (resp., counting) problem in two dimensions. In the dynamic case, we also need to update S when S is updated. We discuss these issues in more detail below. The Dynamic Reporting Problem

Our data structure consists of the following: For each color c, we maintain a balanced binary search tree, Tc , in which the c-colored points of S are stored in increasing x-order. We maintain the colors themselves in a balanced search tree CT , and store with each color c in CT a pointer to Tc . We also store the points of S in a balanced priority search tree (PST ) [28]. (Recall that a PST on m points occupies O(m) space, supports insertions and deletions in O(log m) time, and can be used to report the k points lying inside a grounded query rectangle in O(log m + k) time [28]. Although this query is designed for query ranges of the form [l, r] × (−∞, l], it can be trivially modiﬁed to ignore the points on the upper edge of the range without aﬀecting its performance.) Clearly, the space used by the entire data structure is O(n), where n = |S|. To answer a query q = [l, r], we simply query the PST with q = [l, r] × (−∞, l) and report the colors of the points found. Correctness follows from Lemma 64.1. The query time is O(log n + k), where k is the number of points inside q . By Lemma 64.1, k = i, and so the query time is O(log n + i). Suppose that a c-colored point p is to be inserted into S. If c ∈ CT , then we create a tree Tc containing p, insert p = (p, −∞) into the PST , and insert c, with a pointer to Tc , into CT . Suppose that c ∈ CT . Let u be the successor of p in Tc . If u exists, then we set pred (p) to pred (u) and pred (u) to p; otherwise, we set pred (p) to the rightmost point in Tc . We then insert p into Tc , p = (p, pred (p)) into the PST , delete the old u from the PST , and insert the new u into it. Deletion of a point p of color c is essentially the reverse. We delete p from Tc . Then we delete p from the PST and if p had a successor, u, in Tc then we reset pred (u) to pred (p), delete the old u from the PST , and insert the new one. If Tc becomes empty in the process, then we delete c from CT . Clearly, the update operations are correct and take O(log n)

© 2005 by Chapman & Hall/CRC

64-6

Handbook of Data Structures and Applications

time. Let S be a set of n colored points on the real line. S can be preprocessed into a data structure of size O(n) such that the i distinct colors of the points of S that are contained in any query interval can be reported in O(log n+i) time and points can be inserted and deleted online in S in O(log n) time. THEOREM 64.1

For the static reporting problem, we can dispense with CT and the Tc ’s and simply use a static form of the PST to answer queries. This provides a simple O(n)-space, O(log n + i)query time alternative to another solution given in [23]. The static counting problem

We store the points of S in non-decreasing x-order at the leaves of a balanced binary search tree, T , and store at each internal node t of T an array At containing the points in t’s subtree in non-decreasing y-order. The total space is clearly O(n log n). To answer a query, we determine O(log n) canonical nodes v in T such that the query interval [l, r] covers v’s range but not the range of v’s parent. Using binary search we determine in each canonical node’s array the highest array position containing an entry less than l (and thus the number of points in that node’s subtree that lie in q ) and add up the positions thus found at all canonical nodes. The correctness of this algorithm follows from Lemma 64.1. The total query time is O(log2 n). We can reduce the query time to O(log n) as follows: At each node t we create a linked list, Bt , which contains the same elements as At and maintain a pointer from each entry of Bt to the same entry in At . We then apply the technique of fractional cascading [9] to the B-lists, so that after an initial O(log n)-time binary search in the B-list of the root, the correct positions in the B-lists of all the canonical nodes can be found directly in O(log n) total time. (To facilitate binary search in the root’s B-list, we build a balanced search tree on it after the fractional cascading step.) Once the position in a B-list is known, the appropriate position in the corresponding A-array can be found in O(1) time. It is possible to reduce the space slightly (to O(n log n/ log log n)) at the expense of a larger query time (O(log2 n/ log log n)), by partitioning the points of S recursively into horizontal strips of a certain size and doing binary search, augmented with fractional cascading, within the strips. Details can be found in [18]. Let S be a set of n colored points on the real line. S can be preprocessed into a data structure of size O(n log n) (resp., O(n log n/ log log n)) such that the number of distinctly-colored points of S that are contained in any query interval can be determined in O(log n) (resp., O(log2 n/ log log n)) time. THEOREM 64.2

The dynamic counting problem

We store the points of S using the same basic two-level tree structure as in the ﬁrst solution for the static counting problem. However, T is now a BB (α) tree [32] and the auxiliary structure, D(t), at each node t of T is a balanced binary search tree where the points are stored at the leaves in left to right order by non-decreasing y-coordinate. To facilitate the querying, each node v of D(t) stores a count of the number of points in its subtree. Given a real number, l, we can determine in O(log n) time the number of points in D(t) that have y-coordinate less than l by searching for l in D(t) and adding up the count for each node of D(t) that is not on the search path but is the left child of a node on the path. It should

© 2005 by Chapman & Hall/CRC

Computational Geometry: Generalized Intersection Searching

64-7

be clear that D(t) can be maintained in O(log n) time under updates. In addition to the two-level structure, we also use the trees Tc and the tree CT , described previously, to maintain the correspondence between S and S . We omit further discussion about the maintenance of these trees. Queries are answered as in the static case, except that at each auxiliary structure we use the above-mentioned method to determine the number of points with y-coordinate less than l. Thus the query time is O(log2 n). (We cannot use fractional cascading here.) Insertion/deletion of a point is done using the worst-case updating strategy for BB (α) trees, and take O(log2 n) time. Let S be a set of n colored points on the real line. S can be preprocessed into a data structure of size O(n log n) such that the number of distinctly-colored points of S that are contained in any query interval can be determined in O(log2 n) time and points can be inserted and deleted online in S in O(log2 n) worst-case time. THEOREM 64.3

The static type-2 problem

We wish to preprocess a set S of n colored points on the x-axis, so that for each color intersected by a query interval q = [l, r], the number of points of that color in q can be reported eﬃciently. The solution for this problem originally proposed in [18] takes O(n log n) space and supports queries in O(log n + i) time. The space bound was improved to O(n) in [6], as follows. The solution consists of two priority search trees, PST 1 and PST 2 . PST 1 is similar to the priority search tree built on S in the solution for the dynamic reporting problem, with an additional count stored at each node. Let p = (p, pred (p)) be the point that is stored at a node in PST 1 and c the color of p. Then at this node, we store an additional number t1 (p ), which is the number of points of color c to the right of p. PST 2 is based on a transformation that is symmetric to the one used for PST 1 . For each color c, we sort the distinct points of that color by increasing x-coordinate. For each point p of color c, let next(p) be its successor in the sorted order; for the rightmost point of color c, we take the successor to be the point +∞. We then map p to the point p = (p, next(p)) in the plane and associate with it the color c. Let S be the resulting set of points. We build PST 2 on S , with an additional count stored at each node. Let p = (p, next(p)) be the point that is stored at a node in PST 2 and c the color of p. Then at this node, we store an additional number t2 (p ), which is the number of points of color c to the right of next(p). We also maintain an auxiliary array A of size n. Given a query q = [l, r], we query PST 1 with q = [l, r] × (−∞, l) and for each color c found, we set A[c] = t1 (p ), where p is the point stored at the node where we found c. Then we query PST 2 with q = [l, r] × (r, +∞) and for each color c found, we report c and A[c] − t2 (p ), where p is the point stored at the node where we found c. This works because the queries on PST 1 and PST 2 eﬀectively ﬁnd the leftmost and rightmost points of color c in q = [l, r] (cf. proof of Lemma 64.1). Thus, A[c] − t2 (p ) gives the number of points of color c in q. A set S of n colored points on the real line can be preprocessed into a data structure of size O(n) such that for any query interval, a type-2 counting query can be answered in O(log n + i) time, where i is the output size.

THEOREM 64.4

© 2005 by Chapman & Hall/CRC

64-8

64.3.2

Handbook of Data Structures and Applications

A Sparsiﬁcation-Based Approach

The idea behind this approach is to generate from the given set, S, of colored objects a colored set, S —possibly consisting of diﬀerent objects than those in S—such that a query object q intersects an object in S if and only if it intersects at most a constant number of objects in S . This allows us to use a solution to a standard problem on S to solve the generalized reporting problem on S. (In the case of a generalized counting problem, the requirement is more stringent: exactly one object in S must be intersected.) We illustrate this method with the generalized halfspace range searching problem in Rd , d = 2, 3. Generalized halfspace range searching in R2 and R3

Let S be a set of n colored points in Rd , d = 2, 3. We show how to preprocess S so that for any query hyperplane Q, the i distinct colors of the points lying in the closed halfspace Q− (i.e., below Q) can be reported or counted eﬃciently. Without loss of generality, we may assume that Q is non-vertical since vertical queries are easy to handle. The approach described here is from [19]. We denote the coordinate directions by x1 , x2 , . . . , xd . Let F denote the well-known point-hyperplane duality transform [15]: If p = (p1 , . . . , pd ) is a point in Rd , then F (p) is the hyperplane xd = p1 x1 + · · · + pd−1 xd−1 − pd . If H : xd = a1 x1 + · · · + ad−1 xd−1 + ad is a (non-vertical) hyperplane in Rd , then F (H) is the point (a1 , . . . , ad−1 , −ad ). It is easily veriﬁed that p is above (resp. on, below) H, in the xd -direction, if and only if F (p) is below (resp. on, above) F (H). Note also that F (F (p)) = p and F (F (H)) = H. Using F we map S to a set S of hyperplanes and map Q to the point q = F (Q), both in Rd . Our problem is now equivalent to: “Report or count the i distinct colors of the hyperplanes lying on or above q, i.e., the hyperplanes that are intersected by the vertical ray r emanating upwards from q.” Let Sc be the set of hyperplanes of color c. For each color c, we compute the upper envelope Ec of the hyperplanes in Sc . Ec is the locus of the points of Sc of maximum xd coordinate for each point on the plane xd = 0. Ec is a d-dimensional convex polytope which is unbounded in the positive xd -direction. Its boundary is composed of j-faces, 0 ≤ j ≤ d−1, where each j-face is a j-dimensional convex polytope. Of particular interest to us are the (d − 1)-faces of Ec , called facets. For instance, in R2 , Ec is an unbounded convex chain and its facets are line segments; in R3 , Ec is an unbounded convex polytope whose facets are convex polygons. Let us assume that r is well-behaved in the sense that for no color c does r intersect two or more facets of Ec at a common boundary—for instance, a vertex in R2 and an edge or a vertex in R3 . (This assumption can be removed; details can be found in [19].) Then, by deﬁnition of the upper envelope, it follows that (i) r intersects a c-colored hyperplane if and only if r intersects Ec and, moreover, (ii) if r intersects Ec , then r intersects a unique facet of Ec (in the interior of the facet). Let E be the collection of the envelopes of the diﬀerent colors. By the above discussion, our problem is equivalent to: “Report or count the facets of E that are intersected by r”, which is a standard intersection searching problem. We will show how to solve eﬃciently this ray-envelope intersection problem in R2 and in R3 . This approach does not give an eﬃcient solution to the generalized halfspace searching problem in Rd for d > 3; for this case, we will give a diﬀerent solution in Section 64.3.4. To solve the ray–envelope intersection problem in R2 , we project the endpoints of the line segments of E on the x-axis, thus partitioning it into 2n + 1 elementary intervals (some of which may be empty). We build a segment tree T which stores these elementary intervals at the leaves. Let v be any node of T . We associate with v an x-interval I(v), which is the union of the elementary intervals stored at the leaves in v’s subtree. Let Strip(v) be the

© 2005 by Chapman & Hall/CRC

Computational Geometry: Generalized Intersection Searching

64-9

vertical strip deﬁned by I(v). We say that a segment s ∈ E is allocated to a node v ∈ T if and only if I(v) = ∅ and s crosses Strip(v) but not Strip(parent (v)). Let E(v) be the set of segments allocated to v. Within Strip(v), the segments of E(v) can be viewed as lines since they cross Strip(v) completely. Let E (v) be the set of points dual to these lines. We store E (v) in an instance D(v) of the standard halfplane reporting (resp. counting) structure for R2 given in [10] (resp. [26]). This structure uses O(m) space and has a query time of O(log m + kv ) (resp. O(m1/2 )), where m = |E(v)| and kv is the output size at v. To answer a query, we search in T using q’s x-coordinate. At each node v visited, we need to report or count the lines intersected by r. But, by duality, this is equivalent to answering, in R2 , a halfplane query at v using the query F(q)− = Q− , which we do using D(v). For the reporting problem, we simply output what is returned by the query at each visited node; for the counting problem, we return the sum of the counts obtained at the visited nodes. A set S of n colored points in R2 can be stored in a data structure of size O(n log n) so that the i distinct colors of the points contained in any query halfplane can be reported (resp. counted) in time O(log2 n + i) (resp. O(n1/2 )). THEOREM 64.5

Proof Correctness follows from the preceding discussion. As noted earlier, there are

O(|Sc |) line segments (facets) in Ec ; thus |E| = O( c |Sc |) = O(n) and so |T | = O(n). Hence each segment of E can get allocated to O(log n) nodes of T . Since the structure D(v) has size linear in m = |E(v)|, the total space used is O(n log n). For the reporting problem, the query time at a node v is O(log m + kv ) = O(log n + kv ). When summed over the O(log n) nodes visited, this gives O(log2 n + i). To see this, recall that the ray r can intersect at most one envelope segment of any color; thus the terms kv , taken over all nodes v visited, sum to i. For the counting problem, the query time at v is O(m1/2 ). It can be shown that if v has depth j in T , then m = |E(v)| = O(n/2j ). (See, for instance, [12, page 675].) Thus, the

O(log n) overall query time is O( j=0 (n/2j )1/2 ), which is O(n1/2 ).

In R3 , the approach is similar, but more complex. Our goal is to solve the ray–envelope intersection problem in R3 . As shown in [19], this problem can be reduced to certain standard halfspace range queries in R3 on a set of triangles (obtained by triangulating the Ec ’s.) This problem can be solved by building a segment tree on the x-spans of the triangles projected to the xy-plane and augmenting each node of this tree with a data structure based on partition trees [25] or cutting trees [24] to answer the halfplane queries. Details may be found in [19]. THEOREM 64.6 The reporting version of the generalized halfspace range searching problem for a set of n colored points in R3 can be solved in O(n log2 n) (resp. O(n2+ )) space and O(n1/2+ + i) (resp. O(log2 n + i)) query time, where i is the output size and > 0 is an arbitrarily small constant. The counting version is solvable in O(n log n) space and O(n2/3+ ) query time.

Additional examples of the sparsiﬁcation-based approach may be found in [23]. (An example also appears in the next section, enroute to a persistence-based solution of a generalized problem.)

© 2005 by Chapman & Hall/CRC

64-10

64.3.3

Handbook of Data Structures and Applications

A Persistence-Based Approach

Roughly speaking, we use persistence as follows: To solve a given generalized problem we ﬁrst identify a diﬀerent, but simpler, generalized problem and devise a data structure for it that also supports updates (usually just insertions). We then make this structure partially persistent [14] and query this persistent structure appropriately to solve the original problem. We illustrate this approach for the generalized 3-dimensional range searching problem, where we are required to preprocess a set, S, of n colored points in R3 so that for any query box q = [a, b] × [c, d] × [e, f ] the i distinct colors of the points inside q can be reported eﬃciently. We ﬁrst show how to build a semi-dynamic (i.e., insertions-only) data structure for the generalized versions of the quadrant searching and 2-dimensional range searching problems. These two structures will be the building blocks of our solution for the 3-dimensional problem. Generalized semi-dynamic quadrant searching

Let S be a set of n colored points in the plane. For any point q = (a, b), the northeast quadrant of q, denoted by NE (q), is the set of all points (x, y) in the plane such that x ≥ a and y ≥ b. We show how to preprocess S so that for any query point q, the distinct colors of the points of S contained in NE (q) can be reported, and how points can be inserted into S. The data structure uses O(n) space, has a query time of O(log2 n + i), and an amortized insertion time of O(log n). This solution is based on the sparsiﬁcation approach described previously. For each color c, we determine the c-maximal points. (A point p is called c-maximal if it has color c and there are no points of color c in p’s northeast quadrant.) We discard all points of color c that are not c-maximal. In the resulting set, let the predecessor, pred (p), of a c-colored point p be the c-colored point that lies immediately to the left of p. (For the leftmost point of color c, the predecessor is the point (−∞, ∞).) With each point p = (a, b), we associate the horizontal segment with endpoints (a , b) and (a, b), where a is the x-coordinate of pred (p). This segment gets the same color as p. Let Sc be the set of such segments of color c. The data structure consists of two parts, as follows. The ﬁrst part is a structure T storing the segments in the sets Sc , where c runs over all colors. T supports the following query: given a point q in the plane, report the segments that are intersected by the upward-vertical ray starting at q. Moreover, it allows segments to be inserted and deleted. We implement T as the structure given in [11]. This structure uses O(n) space, supports insertions and deletions in O(log n) time, and has a query time of O(log 2 n + l), where l is the number of segments intersected. The second part is a balanced search tree CT , storing all colors. For each color c, we maintain a balanced search tree, Tc , storing the segments of Sc by increasing y-coordinate. This structure allows us to dynamically maintain Sc when a new c-colored point p is inserted. The general approach (omitting some special cases; see [18]) is as follows: By doing a binary search in Tc we can determine whether or not p is c-maximal in the current set of c-maximal points, i.e., the set of right endpoints of the segments of Sc . If p is not c-maximal, then we simply discard it. If p is c-maximal, then let s1 , . . . , sk be the segments of Sc whose left endpoints are in the southwest quadrant of p. We do the following: (i) delete s2 , . . . , sk from Tc ; (ii) insert into Tc the horizontal segment which starts at p and extends leftwards upto the x-coordinate of the left endpoint of sk ; and (iii) truncate the segment s1 by keeping only the part of it that extends leftwards upto p’s x-coordinate. The entire operation can be done in O(log n + k) time. Let us now consider how to answer a quadrant query, NE (q), and how to insert a point

© 2005 by Chapman & Hall/CRC

Computational Geometry: Generalized Intersection Searching

64-11

into S. To answer NE (q), we query T with the upward-vertical ray from q and report the colors of the segments intersected. The correctness of this algorithm follows from the easily proved facts that (i) a c-colored point lies in NE (q) if and only if a c-maximal point lies in NE (q) and (ii) if a c-maximal point is in NE (q), then the upward-vertical ray from q must intersect a segment of Sc . The correctness of T guarantees that only the segments intersected by this ray are reported. Since the query can intersect at most two segments in any Sc , we have l ≤ 2i, and so the query time is O(log2 n + i). Let p be a c-colored point that is to be inserted into S. If c is not in CT , then we insert it into CT and insert the horizontal, leftward-directed ray emanating from p into a new structure Tc . If c is present already, then we update Tc as just described. In both cases, we then perform the same updates on T . Hence, an insertion takes O((k + 1) log n) time. What is the total time for n insertions into an initially empty set S? For each insertion, we can charge the O(log n) time to delete a segment si , 2 ≤ i ≤ k, to si itself. Notice that none of these segments will reappear. Thus each segment is charged at most once. Moreover, each of these segments has some previously inserted point as a right endpoint. It follows that the number of segments existing over the entire sequence of insertions is O(n) and so the total charge to them is O(n log n). The rest of the cost for each insertion (O(log n) for the binary search plus O(1) for steps (ii) and (iii)) we charge to p itself. Since any p is charged in this mode only once, the total charge incurred in this mode by all the inserted points is O(n log n). Thus the time for n insertions is O(n log n), which implies an amortized insertion time of O(log n). LEMMA 64.2 Let S be a set of n colored points in the plane. There exists a data structure of size O(n) such that for any query point q, we can report the i distinct colors of the points that are contained in the northeast quadrant of q in O(log2 n+i) time. Moreover, if we do n insertions into an initially-empty set then the amortized insertion time is O(log n). Generalized semidynamic 2-dimensional range searching

Our goal here is to preprocess a set S of n colored points in the plane so that for any axesparallel query rectangle q = [a, b] × [c, d], we can solve the semi-dynamic reporting problem eﬃciently. Our solution is based on the quadrant reporting structure of Lemma 64.2. We ﬁrst show how to solve the problem for query rectangles q = [a, b] × [c, ∞). We store the points of S in sorted order by x-coordinate at the leaves of a BB (α) tree T . At each internal node v, we store an instance of the structure of Lemma 64.2 for NE -queries (resp., NW -queries) built on the points in v’s left (resp., right) subtree. Let X(v) denote the average of the x-coordinate in the rightmost leaf in v’s left subtree and the x-coordinate in the leftmost leaf of v’s right subtree; for a leaf v, we take X(v) to be the x-coordinate of the point stored at v. To answer a query q , we do a binary search down T , using [a, b], until either the search runs oﬀ T or a (highest) node v is reached such that [a, b] intersects X(v). In the former case, we stop. In the latter case, if v is a leaf, then if v’s point is in q we report its color. If v is a non-leaf, then we query the structures at v using the NE -quadrant and the NW quadrant derived from q (i.e., the quadrants with corners at (a, c) and (b, c), respectively), and then combine the answers. Updates on T are performed using the amortized-case updating strategy for BB (α) trees [32]. The correctness of the method should be clear. The space and query time bounds follow from Lemma 64.2. Since the amortized insertion time of the quadrant searching structure is O(log n), the insertion in the BB (α) tree takes amortized time O(log2 n) [32].

© 2005 by Chapman & Hall/CRC

64-12

Handbook of Data Structures and Applications

To solve the problem for general query rectangles q = [a, b] × [c, d], we use the above approach again, except that we store the points in the tree by sorted y-coordinates. At each internal node v, we store an instance of the data structure above to answer queries of the form [a, b] × [c, ∞) (resp. [a, b] × (−∞, d]) on the points in v’s left (resp. right) subtree. The query strategy is similar to the previous one, except that we use the interval [c, d] to search in the tree. The query time is as before, while the space and update times increase by a logarithmic factor. LEMMA 64.3 Let S be a set of n colored points in the plane. There exists a data structure of size O(n log2 n) such that for any query rectangle [a, b] × [c, d], we can report the i distinct colors of the points that are contained in it in O(log2 n + i) time. Moreover, points can be inserted into this data structure in O(log3 n) amortized time. Generalized 3-dimensional range searching

The semi-dynamic structure of Lemma 64.3 coupled with persistence allows us to go up one dimension and solve the original problem of interest: Preprocess a set S of n colored points in R3 so that for any query box q = [a, b] × [c, d] × [e, f ] the i distinct colors of the points inside q can be reported eﬃciently. First consider queries of the form q = [a, b] × [c, d] × [e, ∞). We sort the points of S by non-increasing z-coordinates, and insert them in this order into a partially persistent version of the structure of Lemma 64.3, taking only the ﬁrst two coordinates into account. To answer q , we access the version corresponding to the smallest z-coordinate greater than or equal to e and query it with [a, b] × [c, d]. To see that the query algorithm is correct, observe that the version accessed contains the projections on the xy-plane of exactly those points of S whose z-coordinate is at least e. Lemma 64.3 then guarantees that among these only the distinct colors of the ones in [a, b] × [c, d] are reported. These are precisely the distinct colors of the points contained in [a, b] × [c, d] × [e, ∞). The query time follows from Lemma 64.3. To analyze the space requirement, we note that the structure of Lemma 64.3 satisﬁes the conditions given in [14]. Speciﬁcally, it is a pointer-based structure, where each node is pointed to by only O(1) other nodes. As shown in [14], any modiﬁcation made by a persistent update operation on such a structure adds only O(1) amortized space to the resulting persistent structure. By Lemma 64.3, the total time for creating the persistent structure, via insertions, is O(n log3 n). This implies the same bound for the number of modiﬁcations in the structure, so the total space is O(n log3 n). To solve the problem for general query boxes q = [a, b] × [c, d] × [e, f ], we follow an approach similar to that described for the 2-dimensional case: We store the points in a balanced binary search tree, sorted by z-coordinates. We associate with each internal node v in the tree the auxiliary structure described above for answering queries of the form [a, b] × [c, d] × [e, ∞) (resp. [a, b] × [c, d] × (−∞, f ]) on the points in v’s left (resp. right) subtree. (Note that since we do not need to do updates here the tree need not be a BB (α) tree.) Queries are done by searching down the tree using the interval [e, f ]. The query time is as before, but the space increases by a logarithmic factor. THEOREM 64.7 Let S be a set of n colored points in 3-space. S can be stored in a data structure of size O(n log4 n) such that for any query box [a, b] × [c, d] × [e, f ], we can report the i distinct colors of the points that are contained in it in O(log2 n + i) time.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Generalized Intersection Searching

64-13

Additional applications of the persistence-based approach to generalized intersection problems can be found in [18, 19, 21].

64.3.4

A General Approach for Reporting Problems

We describe a general method from [21] for solving any generalized reporting problem given a data structure for a “related” standard decision problem. Let S be a set of n colored geometric objects and let q be any query object. In preprocessing, we store the distinct colors in S at the leaves of a balanced binary tree CT (in no particular order). For any node v of CT , let C(v) be the set of colors stored in the leaves of v’s subtree and let S(v) be the set of those objects of S colored with the colors in C(v). At v, we store a data structure DEC (v) to solve the following standard decision problem on S(v): “Decide whether or not q intersects any object of S(v).” DEC (v) returns “true” if and only if there is an intersection. To answer a generalized reporting query on S, we do a depth-ﬁrst search in CT and query DEC (v) with q at each node v visited. If v is a non-leaf node then we continue searching below v if and only if the query returns “true”; if v is a leaf, then we output the color stored there if and only if the query returns “true”. Assume that a set of n geometric objects can be stored in a data structure of size M (n) such that it can be decided in f (n) time whether or not a query object intersects any of the n objects. Assume that M (n)/n and f (n) are non-decreasing functions for non-negative values of n. Then a set S of n colored geometric objects can be preprocessed into a data structure of size O(M (n) log n) such that the i distinct colors of the objects in S that are intersected by a query object q can be reported in time O(f (n) + i · f (n) log n). THEOREM 64.8

We argue that a color c is reported if and only if there is a c-colored object in S intersecting q. Suppose that c is reported. This implies that a leaf v is reached in the search such that v stores c and the query on DEC (v) returns “true”. Thus, some object in S(v) intersects q. Since v is a leaf, all objects in S(v) have the same color c and the claim follows. For the converse, suppose that q intersects a c-colored object p. Let v be the leaf storing c. Thus, p ∈ S(v ) for every node v on the root-to-v path in CT . Thus, for each v , the query on DEC (v ) will return “true”, which implies that v will be visited and c will be output. v1 , v2 , . . . , vr are the nodes at any level, then the total

space used by CT at that level is

If r r r M (|S(vi )|) = i=1 |S(vi )| · (M (|S(vi )|)/|S(vi )|) ≤ i=1 |S(vi )| · (M (n)/n) = M (n), i=1

r since i=1 |S(vi )| = n and since |S(vi )| ≤ n implies that M (|S(vi )|)/|S(vi )| ≤ M (n)/n. Now since there are O(log n) levels, the overall space is O(M (n) log n). The query time can be upper-bounded as follows: If i = 0, then the query on DEC (root) returns “false” and we abandon the search at the root itself; in this case, the query time is just O(f (n)). Suppose that i = 0. Call a visited node v fruitful if the query on DEC (v) returns “true” and fruitless otherwise. Each fruitful node can be charged to some color in its subtree that gets reported. Since the number of times any reported color can be charged is O(log n) (the height of CT ) and since i colors are reported, the number of fruitful nodes is O(i log n). Since each fruitless node has a fruitful parent and CT is a binary tree, it follows that there are only O(i log n) fruitless nodes. Hence the number of nodes visited by the search is O(i log n). At each such node, v, we spend time f (|S(v)|), which is O(f (n)) since |S(v)| ≤ n and f is non-decreasing. Thus the total time spent in doing queries at the visited nodes is Proof

© 2005 by Chapman & Hall/CRC

64-14

Handbook of Data Structures and Applications

O(i · f (n) log n). The claimed query time follows. As an application of this method, consider the generalized halfspace range searching in Rd , for any ﬁxed d ≥ 2. For d = 2, 3, we discussed a solution for this problem in Section 64.3.2. For d > 3, the problem can be solved by extending (signiﬁcantly) the rayenvelope intersection algorithm outlined in Section 64.3.2. However, the bounds are not very satisfactory—O(ndd/2+ ) space and logarithmic query time or near-linear space and superlinear query time. The solution we give below has more desirable bounds. The colored objects for this problem are points in Rd and the query is a closed halfspace in Rd . We store the objects in CT , as described previously. The standard decision problem that we need to solve at each node v of CT is “Does a query halfspace contain any point of S(v).” The answer to this query is “true” if and only if the query halfspace is nonempty. We take the data structure, DEC (v), for this problem to be the one given in [27]. If d/2 |Sv | = nv , then DEC (v) uses O(nv /(log nv )d/2− ) space and has query time O(log nv ) [27]. The conditions in Theorem 64.8 hold, so applying it gives the following result. For any ﬁxed d ≥ 2, a set S of n colored points in Rd can be stored in a data structure of size O(nd/2 /(log n)d/2−1− ) such that the i distinct colors of the points contained in a query halfspace Q− can be reported in time O(log n + i log2 n). Here > 0 is an arbitrarily small constant. THEOREM 64.9

Other applications of the general method may be found in [21].

64.3.5

Adding Range Restrictions

We describe the general technique of [20] that adds a range restriction to a generalized intersection searching problem. Let PR be a generalized intersection searching problem on a set S of n colored objects and query objects q belonging to a class Q. We denote the answer to a query by PR(q, S). To add a range restriction, we associate with each element p ∈ S a real number kp . In a range-restricted generalized intersection searching problem, denoted by TPR, a query consists of an element q ∈ Q and an interval [l, r], and TPR(q, [l, r], S) := PR(q, {p ∈ S : l ≤ kp ≤ r}). For example, if PR is the generalized (d − 1)-dimensional range searching problem, then TPR is the generalized d-dimensional version of this problem, obtained by adding a range restriction to the dth dimension. Assume that we have a data structure DS that solves PR with O((log n)u + i) query time using O(n1+ ) space and a data structure TDS that solves TPR for generalized (semiinﬁnite) queries of the form TPR(q, [l, ∞), S) with O((log n)v + i) query time using O(nw ) space. (Here u and v are positive constants, w > 1 is a constant, and > 0 is an arbitrarily small constant.) We will show how to transform DS and TDS into a data structure that solves generalized queries TPR(q, [l, r], S) in O((log n)max(u,v,1) + i) time, using O((n1+ ) space. Let S = {p1 , p2 , . . . , pn }, where kp1 ≥ kp2 ≥ . . . ≥ kpn . Let m be an arbitrary parameter with 1 ≤ m ≤ n. We assume for simplicity that n/m is an integer. Let Sj = {p1 , p2 , . . . , pjm } and Sj = {pjm+1 , pjm+2 , ...p(j+1)m } for 0 ≤ j < n/m. The transformed data structure consists of the following. For each j with 0 ≤ j < n/m, there is a data structure DS j (of type DS ) storing Sj for solving generalized queries of the

© 2005 by Chapman & Hall/CRC

Computational Geometry: Generalized Intersection Searching

64-15

form PR(q, Sj ), and a data structure TDS j (of type TDS ) storing Sj for solving generalized queries of the form TPR(q, [l, ∞), Sj ). To answer a query TPR(q, [l, ∞), S), we do the following. Compute the index j such that kp(j+1)m < l ≤ kpjm . Solve the query PR(q, Sj ) using DS j , solve the query TPR(q, [l, ∞), Sj ) using TDS j , and output the union of the colors reported by these two queries. It is easy to see that the query algorithm is correct. The following lemma gives the complexity of the transformed data structure. The transformed data structure uses O(n2+ /m + n mw−1) space and can be used to answer generalized queries TPR(q, [l, ∞), S) in O((log n)max(u,v,1) + i) time. LEMMA 64.4

THEOREM 64.10 Let S, DS and TDS be as above. There exists a data structure of size O(n1+ ) that solves generalized queries TPR(q, [l, r], S) in O((log n)max(u,v,1) + i) time.

We will use Lemma 64.4 to establish the claimed bounds for answering generalized queries TPR(q, [l, ∞), S). The result for queries TPR(q, [l, r], S) then follows from a technique, based on BB (α) trees, that we used in Section 64.3.3. If w > 2, then we apply Lemma 64.4 with m = n1/w . This gives a data structure having size O(n2 ) that answers queries TPR(q, [l, ∞), S) in O((log n)max(u,v,1) + i) time. Hence, we may assume that w = 2. By applying Lemma 64.4 repeatedly, we obtain, for each integer constant a ≥ 1, a data structure of size O(n1++1/a ) that answers queries TPR(q, [l, ∞), S) in O((log n)max(u,v,1) + i) time. This claim follows by induction on a; in the inductive step from a to a + 1, we apply Lemma 64.4 with m = na/(a+1) . Proof

Using Theorem 64.10, we can solve eﬃciently, for instance, the generalized orthogonal range searching problem in Rd . (Examples of other problems solvable via this method may be found in [20].) THEOREM 64.11 Let S be a set of n colored points in Rd , where d ≥ 1 is a constant. There exists a data structure of size O(n1+ ) such that for any query box in Rd , we can report the i distinct colors of the points that are contained in it in O(log n + i) time.

The proof is by induction on d. For d = 1, the claim follows from Theorem 64.1. Let d ≥ 2, and let DS be a data structure of size O(n1+ ) that answers generalized (d − 1)-dimensional range queries in O(log n + i) time. Observe that for the generalized d-dimensional range searching problem, there are only polynomially many distinct semiinﬁnite queries. Hence, there exists a data structure TDS of polynomial size that answers generalized d-dimensional semi-inﬁnite range queries in O(log n + i) time. Applying Theorem 64.10 to DS and TDS proves the claim. Proof

64.4

Conclusion and Future Directions

We have reviewed recent research on a class of geometric query-retrieval problems, where the objects to be queried come aggregated in disjoint groups and of interest are questions concerning the intersection of the query object with the groups (rather than with the indi-

© 2005 by Chapman & Hall/CRC

64-16

Handbook of Data Structures and Applications

vidual objects). These problems include the well-studied standard intersection problems as a special case and have many applications. We have described several general techniques that have been identiﬁed for these problems and have illustrated them with examples. Some potential directions for future work include: (i) extending the transformation-based approach to higher dimensions; (ii) improving the time bounds for some of the problems discussed here—for instance, can the generalized orthogonal range searching problem in Rd , for d ≥ 4, be solved with O(polylog(n) + i) query time and O(n(log n)O(1) n) space; (iii) developing general dynamization techniques for generalized problems, along the lines of, for instance, [5] for standard problems; (iv) developing eﬃcient solutions to generalized problems where the objects may be in time-dependent motion; and (v) implementing and testing experimentally some of the solutions presented here.

64.5

Acknowledgment

Portions of the material presented in this chapter are drawn from the authors’ prior publications: References [18–20], with permission from Elsevier (http://www.elsevier.com/), and reference [21], with permission from Taylor & Francis (http://www.tandf.co.uk).

References [1] P. K. Agarwal, M. de Berg, S. Har-Peled, M. H. Overmars, M. Sharir, and J. Vahrenhold. Reporting intersecting pairs of convex polytopes in two and three dimensions. Computational Geometry: Theory and Applications, 23:195–207, 2002. [2] P. K. Agarwal, S. Govindarajan, and S. Muthukrishnan. Range searching in categorical data: Colored range searching on grid. In Proceedings of the 10th European Symposium on Algorithms, volume 2461 of Lecture Notes in Computer Science, pages 17–28, Berlin, 2002. Springer-Verlag. [3] P. K. Agarwal and M. van Kreveld. Polygon and connected component intersection searching. Algorithmica, 15:626–660, 1996. [4] Pankaj K. Agarwal and Jeﬀ Erickson. Geometric range searching and its relatives. In B. Chazelle, J. E. Goodman, and R. Pollack, editors, Advances in Discrete and Computational Geometry, volume 223 of Contemporary Mathematics, pages 1–56. American Mathematical Society, Providence, RI, 1999. [5] J. L. Bentley and J. B. Saxe. Decomposable searching problems I: Static-to-dynamic transformations. Journal of Algorithms, 1:301–358, 1980. [6] P. Bozanis, N. Kitsios, C. Makris, and A. Tsakalidis. New upper bounds for generalized intersection searching problems. In Proceedings of the 22nd International Colloqium on Automata, Languages and Programming, volume 944 of Lecture Notes in Computer Science, pages 464–475, Berlin, 1995. Springer-Verlag. [7] P. Bozanis, N. Kitsios, C. Makris, and A. Tsakalidis. Red-blue intersection reporting for objects of non-constant size. The Computer Journal, 39:541–546, 1996. [8] P. Bozanis, N. Kitsios, C. Makris, and A. Tsakalidis. New results on intersection query problems. The Computer Journal, 40:22–29, 1997. [9] B. Chazelle and L. J. Guibas. Fractional cascading: I. A data structuring technique. Algorithmica, 1:133–162, 1986. [10] B. Chazelle, L. J. Guibas, and D. T. Lee. The power of geometric duality. BIT, 25:76–90, 1985. [11] S. W. Cheng and R. Janardan. Eﬃcient dynamic algorithms for some geometric intersection problems. Information Processing Letters, 36:251–258, 1990. [12] S. W. Cheng and R. Janardan. Algorithms for ray-shooting and intersection searching. Journal of Algorithms, 13:670–692, 1992.

© 2005 by Chapman & Hall/CRC

Computational Geometry: Generalized Intersection Searching

64-17

[13] Mark de Berg, Marc van Kreveld, Mark Overmars, and Otfried Schwarzkopf. Computational Geometry: Algorithms and Applications. Springer-Verlag, Berlin, Germany, 2nd edition, 2000. [14] J. R. Driscoll, N. Sarnak, D. D. Sleator, and R. E. Tarjan. Making data structures persistent. Journal of Computer and System Sciences, 38:86–124, 1989. [15] H. Edelsbrunner. Algorithms in Combinatorial Geometry. Springer–Verlag, New York, 1987. [16] P. Ferragina, N. Koudas, S. Muthukrishnan, and D. Srivastava. Two-dimensional substring indexing. In Proceedings of the 20th ACM Symposium on Principles of Database Systems, pages 282–288, 2001. [17] P. Gupta. Eﬃcient algorithms and data structures for geometric intersec tion problems. Ph.D. dissertation, Dept. of Computer Science, Univ. of Minnesota, Minneapolis, MN, 1995. [18] P. Gupta, R. Janardan, and M. Smid. Further results on generalized intersection searching problems: counting, reporting and dynamization. Journal of Algorithms, 19:282–317, 1995. [19] P. Gupta, R. Janardan, and M. Smid. Algorithms for generalized halfspace range searching and other intersection searching problems. Computational Geometry: Theory and Applications, 5:321–340, 1996. [20] P. Gupta, R. Janardan, and M. Smid. A technique for adding range restrictions to generalized searching problems. Information Processing Letters, 64:263–269, 1997. [21] P. Gupta, R. Janardan, and M. Smid. Algorithms for some intersection searching problems involving circular objects. International Journal of Mathematical Algorithms, 1:35–52, 1999. [22] P. Gupta, R. Janardan, and M. Smid. Eﬃcient algorithms for counting and reporting pairwise intersections between convex polygons. Information Processing Letters, 69:7–13, 1999. [23] R. Janardan and M. Lopez. Generalized intersection searching problems. International Journal of Computational Geometry and Applications, 3:39–69, 1993. [24] J. Matouˇsek. Cutting hyperplane arrangements. Discrete & Computational Geometry, 6:385–406, 1991. [25] J. Matouˇsek. Eﬃcient partition trees. Discrete & Computational Geometry, 8:315– 334, 1992. [26] J. Matouˇsek. Range searching with eﬃcient hierarchical cuttings. Discrete & Computational Geometry, 10:157–182, 1993. [27] J. Matouˇsek and O. Schwarzkopf. On ray shooting in convex polytopes. Discrete & Computational Geometry, 10:215–232, 1993. [28] E. M. McCreight. Priority search trees. SIAM Journal on Computing, 14:257–276, 1985. [29] S. Muthukrishnan. Eﬃcient algorithms for document retrieval problems. In Proceedings of the 13th ACM-SIAM Symposium on Discrete Algorithms, pages 657–666, 2002. [30] M. J. van Kreveld. New Results on Data Structures in Computational Geometry. Ph.D. dissertation, Dept. of Computer Science, Utrecht Univ., The Netherlands, 1992. [31] J. S. Vitter. External memory algorithms and data structures: dealing with massive data. ACM Computing Surveys, 33:209–271, 2001. [32] D.E. Willard and G.S. Lueker. Adding range restriction capability to dynamic data structures. Journal of the ACM, 32:597–617, 1985.

© 2005 by Chapman & Hall/CRC

Handbook of data structures and applications

Read more

Handbook of Data Structures and Applications

Read more

Handbook of algorithms and data structures

Read more

Data Structures and Algorithms

Read more

Algorithms and Data Structures: With Applications to Graphics and Geometry

Read more

Algorithms and Data Structures: With Applications to Graphics and Geometry

Read more

Algorithms and Data Structures: With Applications to Graphics and Geometry

Read more

Data Structures and Their Algorithms

Read more

Data Structures and Their Algorithms

Read more

Data Structures and Their Algorithms

Read more

Handbook of Polyethylene: Structures: Properties, and Applications (Plastics Engineering)

Read more

Data Structures and Efficient Algorithms

Read more

Data structures and network algorithms

Read more

Data Structures and Their Algorithms

Read more

Structures Of String Matching And Data Compression

Read more

Data Structures Using Pascal

Read more

C++ Data Structures

Read more

Purely Functional Data Structures

Read more

C & Data Structures

Read more

Data Structures Demystified

Read more

Advanced data structures

Read more

Data Structures Demystified

Read more

Handbook of Statistical Analysis and Data Mining Applications

Read more

Advanced data structures

Read more

Algorithms + Data Structures = Programs

Read more

C & Data Structures

Read more

Algorithms + Data Structures = Programs

Read more

Biomedical Data and Applications

Read more

Handbook of Data Visualization

Read more

Purely Functional Data Structures

Read more

Recommend Documents

Handbook of data structures and applications

CHAPMAN & HALL/CRC COMPUTER and INFORMATION SCIENCE SERIES Handbook of DATA STRUCTURES and APPLICATIONS © 2005 by Cha...

Handbook of Data Structures and Applications

www.dbebooks.com - Free Books & magazines CHAPMAN & HALL/CRC COMPUTER and INFORMATION SCIENCE SERIES Handbook of DATA...

Handbook of algorithms and data structures

Data Structures and Algorithms

Algorithms and Data Structures: With Applications to Graphics and Geometry

Algorithms and Data Structures: With Applications to Graphics and Geometry

All A I' I rrL g Ii I 1, vS p : I$',i,.d]' ]1, I 3 1 p I 1 1' ALGORITHMS AND DATA STRUCTURES With Applicat...

Algorithms and Data Structures: With Applications to Graphics and Geometry

it .}-------------------- S - - - --- - - - - - - - - .hVv\ iNJ^.hMJVNMv`.M.hkMNVMM.^ t, __. ALGORITHMS AND DATA S...

Data Structures and Their Algorithms

Data Structures and Their Algorithms

-I AIe I -I~i Alb i 000-=,,I; = =z Ad J r Data Structures &Their Algorithms 4I Data Structures &Their Algor...

Data Structures and Their Algorithms