METHODS
IN
MOLECULAR BIOLOGY™
Series Editor John M. Walker School of Life Sciences University of Hertfordshire Hatfi...
93 downloads
1353 Views
6MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
METHODS
IN
MOLECULAR BIOLOGY™
Series Editor John M. Walker School of Life Sciences University of Hertfordshire Hatfield, Hertfordshire, AL10 9AB, UK
For other titles published in this series, go to www.springer.com/series/7651
Two-Dimensional Electrophoresis Protocols Edited by
David Sheehan and Raymond Tyther Department of Biochemistry, University College Cork, Cork, Ireland
Editors David Sheehan Department of Biochemistry University College Cork Cork, Ireland
Raymond Tyther Department of Biochemistry University College Cork Cork, Ireland
ISBN: 978-1-58829-937-6 e-ISBN: 978-1-59745-281-6 ISSN: 1064-3745 e-ISSN: 1940-6029 DOI: 10.1007/978-1-59745-281-6 Library of Congress Control Number: 2008942064 © Humana Press, a part of Springer Science+Business Media, LLC 2009 All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Humana Press, c/o Springer Science+Business Media, LLC, 233 Spring Street, New York, NY 10013, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use in this publication of trade names, trademarks, service marks, and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights. While the advice and information in this book are believed to be true and accurate at the date of going to press, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Cover Illustration: Figure 4A, Chapter 10, “Proteomic Analysis of Caenorhabditis Elegans” by Pan-Young Jeong, Keun Na, Mi-Jeong Jeong, David Chitwood, Yhong-Hee Shim, and Young-Ki Paik Printed on acid-free paper springer.com
Preface The human genome and other large-scale genome sequencing projects have inevitably led to a focus on the proteins encoded by genes. The field of proteomics has grown enormously as a result and a number of high-throughput technologies have now been developed allowing discovery-led investigations of protein populations rather than more traditional hypothesis-led studies on single proteins. These high-throughput technologies include gene and protein microarrays, the yeast two-hybrid system, and various mass spectrometry methodologies. However, despite developments and improvements in these technologies, two-dimensional electrophoresis (2DE) remains one of the most widely used approaches. This technique was revolutionised by the development of immobilised pH gradient strips which are now commercially available. This has made possible highly reproducible separations of matched samples. Developments in staining, mass spectrometry, and bioinformatics supported these developments and have led to a measure of standardisation in design, execution, and analysis of proteomics experiments. This book began life as a proposed update of the excellent volume 2DE Protocols edited by Andrew Link of the University of Washington at Seattle. However, we realised that 2DE has undergone major development in aspects of its technology in recent years and we were anxious to reflect these in the present volume. We are also conscious that many researchers have now begun to apply proteomics methodologies to a growing range of biological material and we were anxious to include contributions to reflect the challenges posed in sample preparation in less widely used organisms. As with all of this series, the emphasis in this volume is on the presentation of clear protocols suitable for a newcomer to the field. We felt, however, that some aspects merited inclusion of overview review-type articles and a number of these are included at the beginning of the book. The protocols reflect the key steps in a 2DE experiment which include sample preparation, staining, post-translational modification, spot identification, and bioinformatics. We hope especially that newcomers to 2DE will find this volume useful and be encouraged to apply some of the powerful techniques described here to their own research. The editors would like to thank especially the series editor, Prof. John Walker, for his endless patience, enthusiasm, and encouragement throughout this project. We would also like to thank our contributors for their excellent cooperation and generosity in sharing their expertise in this book. Cork, Ireland
David Sheehan Raymond Tyther
v
Contents Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contributors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v xi
OVERVIEW CHAPTERS 1 2 3 4 5
6
7
Two-Dimensional Electrophoresis: An Overview . . . . . . . . . . . . . . . . . . . . . . . . . 3 Richard Smith Solubilization of Proteins in 2DE: An Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Thierry Rabilloud Selection of pH Ranges in 2DE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Mireille Starita-Geribaldi Difficult Proteins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Ben Herbert and Elizabeth Harry Organelle Proteomics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Matthias Plöscher, Bernhard Granvogl, Veronika Reisinger, Axel Masanek, and Lutz Andreas Eichacker Applications of Chemical Tagging Approaches in Combination with 2DE and Mass Spectrometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Alexander Leitner and Wolfgang Lindner Immunoblotting 2DE Membranes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Brian McDonagh
PROTOCOLS CHAPTERS 8 9 10
11 12 13 14
Troubleshooting Image Analysis in 2DE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bettina Levänen and Åsa M. Wheelock Analysis of Bacterial Proteins by 2DE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Philip Cash and Evelyn Argo Proteomic Analysis of Caenorhabditis elegans . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pan-Young Jeong, Keun Na, Mi-Jeong Jeong, David Chitwood, Yhong-Hee Shim, and Young-Ki Paik Protein Extraction for 2DE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Claus Zabel and Joachim Klose Analysis of Proteins from Marine Molluscs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Suze Chora, Maria João Bebianno, and Michèle Roméo Preparation and Analysis of Plastid Proteomes by 2DE . . . . . . . . . . . . . . . . . . . . . Anne von Zychlinski and Wilhelm Gruissem High-Resolution 2DE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Katrin Marcus, Cornelia Joppich, Caroline May, Kathy Pfeiffer, Barbara Sitek, Helmut Meyer, and Kai Stuehler
vii
113 131 145
171 197 205 221
viii
15
Contents
Blue Native-Gel Electrophoresis Proteomics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 Kelly Andringa, Adrienne King, and Shannon Bailey
16 2DE for Proteome Analysis of Human Metaphase Chromosomes . . . . . . . . . . . . . 259 Kiichi Fukui and Susumu Uchiyama 17 Microsomal Proteomics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 Diana M. Wong and Khosrow Adeli
18 19 20 21 22
23
24 25
26
27 28 29 30 31 32
Prefractionation Using Microscale Solution IEF . . . . . . . . . . . . . . . . . . . . . . . . . . Won-A Joo and David Speicher Diagonal Electrophoresis for Detection of Protein Disulphide Bridges . . . . . . . . . Brian McDonagh High-Resolution Large-Gel 2DE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Claus Zabel and Joachim Klose Silver Staining of Proteins in 2DE Gels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cécile Lelong, Mireille Chevallet, Sylvie Luche, and Thierry Rabilloud Detection of 4-Hydroxy-2-Nonenal- and 3-Nitrotyrosine-Modified Proteins Using a Proteomics Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rukhsana Sultana, Tanea Reed, and D. Allan Butterfield Proteomic Detection of Oxidized and Reduced Thiol Proteins in Cultured Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sarah L. Cuddihy, James W. Baty, Kristin K. Brown, Christine C. Winterbourn, and Mark B. Hampton Detection of Ubiquitination in 2DE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brian McDonagh Phosphoproteome Analysis by In-Gel Isoelectric Focusing and Tandem Mass Spectrometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sarka Beranova-Giorgianni, Dominic M. Desiderio, and Francesco Giorgianni Detection of Protein Glutathionylation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Elisabetta Gianazza, Ivano Eberini, and Pietro Ghezzi Activity-Based Protein Profiling of Protein Tyrosine Phosphatases . . . . . . . . . . . . Chad Walls, Bo Zhou, and Zhong-Yin Zhang Active Protease Mapping in 2DE Gels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zhenjun Zhao and Pamela J. Russell Two-Dimensional Difference Gel Electrophoresis . . . . . . . . . . . . . . . . . . . . . . . . . Gert Van den Bergh Protein Expression Profiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brian P. Bradley, Bose Kalampanayil, and Michael C. O’Neill C-Terminal Sequence Analysis of 2DE-Separated Proteins . . . . . . . . . . . . . . . . . . Bart Samyn, Kjell Sergeant, and Jozef Van Beeumen Shotgun Protein Analysis by Liquid Chromatography-Tandem Mass Spectrometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kazuishi Kubota, Toshiyuki Kosaka, and Kimihisa Ichikawa
291 305 311 339
351
363
377
383
397 417 431 439 455 469
483
Contents
De Novo Sequence Analysis of N-Terminal Sulfonated Peptides After in-Gel Guanidination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kjell Sergeant, Jozef Van Beeumen, and Bart Samyn 34 Tryptic Digestion of In-Gel Proteins for Mass Spectrometry Analysis . . . . . . . . . . Mai-Loan Huynh, Pamela Russell, and Bradley Walsh 35 Database Interrogation Algorithms for Identification of Proteins in Proteomic Separations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Patricia M. Palagi, Frédérique Lisacek, and Ron D. Appel 36 Creating 2DE Databases for the World Wide Web . . . . . . . . . . . . . . . . . . . . . . . . Christine Hoogland, Khaled Mostaguir, and Ron D. Appel Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ix
33
495 507
515 533 541
Contributors KHOSROW ADELI • Molecular Structure and Function, The Hospital for Sick Children Research Institute, and the Department of Biochemistry, University of Toronto, Toronto, ON, Canada KELLY ANDRINGA • Department of Environmental Health Sciences and The Center for Free Radical Biology, University of Alabama at Birmingham, Birmingham, AL, USA RON APPEL • Proteome Informatics Group, Swiss Institute of Bioinformatics and Computer Science Department, Geneva University, Geneva, Switzerland SHANNON BAILEY • Department of Environmental Health Sciences and The Center for Free Radical Biology, University of Alabama at Birmingham, Birmingham, AL, USA JAMES W. BATY • Department of Pathology, Christchurch School of Medicine & Health Sciences, University of Otago, Christchurch, New Zealand MARIA BEBIANNO • Department of Marine Science, University of the Algarve, Faro, Portugal SARKA BERANOVA-GIORGIANNI • Department of Pharmaceutical Sciences, Charles B. Stout Neuroscience Mass Spectrometry Laboratory and Department of Neurology, The University of Tennessee Health Science Center, Memphis, TN, USA BRIAN BRADLEY • Department of Biological Sciences, University of Maryland, Baltimore County, Baltimore, MD, USA KRISTIN K. BROWN • Department of Pathology, Christchurch School of Medicine & Health Sciences, University of Otago, Christchurch, New Zealand ALLAN BUTTERFIELD • Department of Chemistry, Sanders-Brown Center on Aging and Center of Membrane Sciences, University of Kentucky, Lexington, KY, USA PHILIP CASH • Department of Medical Microbiology, University of Aberdeen, Aberdeen, Scotland, UK MIREILLE CHEVALLET • CEA-DSV-iRTSV/LBBSI and UMR CNRS, CEA Grenoble, Grenoble, France DAVID CHITWOOD • Nematology Laboratory, USDA, ARS, BARC-West, Beltsville, MD, USA SUZE CHORA ROSE • University of Nice Sophia-Antipolis, Nice, France Department of Marine Science, University of the Algarve, Faro, Portugal SARAH L. CUDDIHY • Department of Pathology, Christchurch School of Medicine & Health Sciences, University of Otago, Christchurch, New Zealand DOMINIC DESIDERIO • Charles B. Stout Neuroscience Mass Spectrometry Laboratory and Department of Neurology, The University of Tennessee Health Science Center, Memphis, TN, USA
xi
xii
Contributors
IVANO EBERINI • Dipartimento di Scienze Farmacologiche, Università degli Studi di Milano, Milan, Italy LUTZ EICHAKER • Department für Biologie I, Ludwig-Maximilians-Universität, Munich, Germany KIICHI FUKUI • Department of Biotechnology, University of Osaka, Osaka, Japan PIETRO GHEZZI • Istituto di Ricerche Farmacologiche “Mario Negri”, Milan, Italy ELIZABETTA GIANAZZA • Dipartimento di Scienze Farmacologiche, Università degli Studi di Milano, Milan, Italy FRANCESCO GIORGIANNI • Charles B. Stout Neuroscience Mass Spectrometry Laboratory and Department of Neurology, The University of Tennessee Health Science Center, Memphis, TN, USA BERNHARD GRANVOGL • Department für Biologie I, Ludwig-MaximiliansUniversität, Munich, Germany WILHELM GRUISSEM • Institute of Plant Sciences and Functional Genomics Center, ETH Zurich, Zurich, Switzerland MARK B. HAMPTON • Department of Pathology, Christchurch School of Medicine & Health Sciences, University of Otago, Christchurch, New Zealand ELIZABETH HARRY • Institute for the Biotechnology of Infectious Diseases, University of Technology, Sydney, NSW, Australia BEN HERBERT • Institute for the Biotechnology of Infectious Diseases, University of Technology, Sydney, NSW, Australia CHRISTINE HOOGLAND • Swiss Institute of Bioinformatics, Geneva, Switzerland MAI-LOAN HUYNH • Minomic Pty Ltd, Chatswood West, NSW, Australia KIMIHISA ICHIKAWA • Advanced Technology Research Laboratories, Daiichi Sankyo Co., Ltd., Hiromachi, Shinagawa-ku, Tokyo, Japan MI-JEONG JEONG • Yonsei Proteome Research Center, Biomedical Proteome Research Center and Department of Biochemistry, Yonsei University, Seoul, Korea PAN-YOUNG JEONG • Yonsei Proteome Research Center, Biomedical Proteome Research Center and Department of Biochemistry, Yonsei University, Seoul, Korea WON-A JOO • The Wistar Institute, Philadelphia, PA, USA CORNELIA JOPPICH • Medizinisches Proteom-Center, Ruhr-Universität Bochum, Bochum, Germany BOSE KALAMPANAYIL • Department of Biological Sciences, University of Maryland, Baltimore County, Baltimore, MD, USA ADRIENNE KING • Department of Environmental Health Sciences and The Center for Free Radical Biology, University of Alabama at Birmingham, Birmingham, AL, USA JOACHIM KLOSE • Institut für Humangenetik, Universitätsklinikum Charité, Berlin, Germany TOSHIYUKI KOSAKA • Advanced Technology Research Laboratories, Daiichi Sankyo Co., Ltd., Hiromachi, Shinagawa-ku, Tokyo, Japan KAZUISHI KUBOTA • Advanced Technology Research Laboratories, Daiichi Sankyo Co., Ltd., Hiromachi, Shinagawa-ku, Tokyo, Japan ALEXANDER LEITNER • Department of Analytical Chemistry and Food Chemistry, University of Vienna, Vienna, Austria
Contributors
xiii
CÉCILE LELONG • CEA-DSV-iRTSV/LBBSI and UMR CNRS, CEA Grenoble, Grenoble, France BETTINA LEVÄNEN • Karolinska Biomics Center and Department of Medicine, Division of Respiratory Medicine, Karolinska Institutet, Stockholm, Sweden WOLFGANG LINDNER • Department of Analytical Chemistry and Food Chemistry, University of Vienna, Vienna, Austria FREDERIQUE LISACEK • Proteome Informatics Group, Swiss Institute of Bioinformatics, Geneva, Switzerland SYLVIE LUCHE • CEA-DSV-iRTSV/LBBSI and UMR CNRS, CEA Grenoble, Grenoble, France KATRIN MARCUS • Medizinisches Proteom-Center, Ruhr-Universität Bochum, Bochum, Germany AXEL MASANEK • Department für Biologie I, Ludwig-Maximilians-Universität, Munich, Germany CAROLINE MAY • Medizinisches Proteom-Center, Ruhr-Universität Bochum, Bochum, Germany BRIAN MCDONAGH • Department of Biochemistry, University College Cork, Cork, Ireland HELMUT MEYER • Medizinisches Proteom-Center, Ruhr-Universität Bochum, Bochum, Germany KHALED MOSTAGUIR • Swiss Institute of Bioinformatics, Geneva, Switzerland KEUN NA • Yonsei Proteome Research Center, Biomedical Proteome Research Center and Department of Biochemistry, Yonsei University, Seoul, Korea MICHAEL C. O’NEILL • Department of Biological Sciences, University of Maryland, Baltimore County, Baltimore, MD, USA YOUNG-KI PAIK • Yonsei Proteome Research Center, Biomedical Proteome Research Center and Department of Biochemistry, Yonsei University, Seoul, Korea PATRICIA PALAGI • Proteome Informatics Group, Swiss Institute of Bioinformatics, Geneva, Switzerland KATHY PFEIFFER • Medizinisches Proteom-Center, Ruhr-Universität Bochum, Bochum, Germany • Department für Biologie I, Ludwig-Maximilians-Universität, ´´ MATTHIAS PL OSCHER Munich, Germany THIERRY RABILLOUD • Commissariat à l’Energie Atomique, Grenoble, France TANEA REED • Department of Chemistry, Sanders-Brown Center on Aging and Center of Membrane Sciences, University of Kentucky, Lexington, KY, USA VERONIKA REISINGER • Department für Biologie I, Ludwig-Maximilians-Universität, Munich, Germany MICHELE ROMEO • University of Nice Sophia-Antipolis, Nice, France PAMELA J. RUSSELL • Oncology Research Centre, Prince of Wales Hospital, Randwick, and Faculty of Medicine, University of New South Wales, Sydney, NSW, Australia BART SAMYN • Department of Biochemistry Physiology and Microbiology, University of Ghent, Ghent, Belgium KJELLL SERGEANT • Department of Biochemistry Physiology and Microbiology, University of Ghent, Ghent, Belgium
xiv
Contributors
YHONG-HEE SHIM • Department of Bioscience and Biotechnology and Bio/Molecular Informatics Center, Konkuk University, Seoul, Korea BARBARA SITEK • Medizinisches Proteom-Center, Ruhr-Universität Bochum, Bochum, Germany RICHARD SMITH • Department of Medical Physics and Applied Radiation Sciences, McMaster University, Hamilton, ON, Canada DAVID SPEICHER • The Wistar Institute, Philadelphia, PA, USA MIRIELLE STARITA-GERIBALDI • Department des Sciences Biologique UFR d’Ontologie, Pôle Universitaire Saint-Jean d’Angely, Nice, France KAI STUEHLER • Medizinisches Proteom-Center, Ruhr-Universität Bochum, Bochum, Germany RUKSHANA SULTANA • Department of Chemistry, Sanders-Brown Center on Aging and Center of Membrane Sciences, University of Kentucky, Lexington, KY, USA RAYMOND TYTHER • Department of Biochemistry, University College Cork, Cork, Ireland SUSUMU UCHIYAMA • Department of Biotechnology, University of Osaka, Osaka, Japan JOSEF VAN BEEUMEN • Department of Biochemistry Physiology and Microbiology University of Ghent, Ghent, Belgium GERT VAN DEN BERGH • Laboratory of Neuroplasticity and Neuroproteomics, Katholieke Universiteit Leuven, Leuven, Belgium ANNE VON ZYCHLINSKI • Department of Biochemistry, University of Otago, Dunedin, New Zealand CHAD WALLS • Department of Biochemistry and Molecular Biology, Indiana University School of Medicine, Indianapolis, IN, USA BRADLEY WALSH • Minomic Pty Ltd, Chatswood West, NSW, Australia ÅSA WHEELOCK • Karolinska Biomics Center and Department of Medicine, Division of Respiratory Medicine, Karolinska Institutet, Stockholm, Sweden CHRISTINE C. WINTERBOURN • Department of Pathology, Christchurch School of Medicine & Health Sciences, University of Otago, Christchurch, New Zealand DIANA WONG • Molecular Structure and Function, The Hospital for Sick Children Research Institute, and the Department of Biochemistry, University of Toronto, Toronto, ON, Canada CLAUS ZABEL • Institut für Humangenetik, Universitätsklinikum Charité, Berlin, Germany ZHONG-YIN ZHANG • Department of Biochemistry and Molecular Biology, Indiana University School of Medicine, Indianapolis, IN, USA ZHENJUN ZHAO • Institute for Eye Research and Vision Cooperative Research Centre, University of New South Wales, Sydney, NSW, Australia BO ZHOU • Department of Biochemistry and Molecular Biology, Indiana University School of Medicine, Indianapolis, IN, USA
Overview Chapters
Chapter 1 Two-Dimensional Electrophoresis: An Overview Richard Smith Summary Two-dimensional gel electrophoresis (2DE) separates proteins by molecular charge and molecular size. Proteins are first solubilised in a denaturing buffer containing a neutral chaotrope, a zwitterionic or neutral detergent, and a reducing agent. First-dimension isoelectric keywords, focusing, then subjects proteins to a high voltage within a pH gradient. The amphoteric nature of proteins means each migrates to the pH where the net molecular charge is zero. After equilibration, to ensure complete protein unfolding, the second dimension separates by molecular size. Each protein is therefore resolved at a unique isoelectric point/molecular size coordinate. After visualisation by staining proteome changes are revealed by gel image analysis, and protein spots of interest excised and identified by mass spectrometry sequence analysis combined with database comparison. Variations to this procedure include staining or radio-labelling prior to electrophoresis. Although 2DE does have limitations, the most significant being the resolution of membrane and/or hydrophobic proteins, the potential solutions offered by pre-fractionation or adjustments to the electrophoresis regimen mean this technique is likely to remain central to proteomic research. Key words: Protein solubilisation, Interfering substances, Isoelectric focussing, Polyacrylamide slab gel, Imaging, Difference gel electrophoresis, Radio-labelling, Membrane proteins, Review.
1. Proteomics and Two-Dimensional Gel Electrophoresis
The term ‘proteomics’ can refer to the protein complement of a cell at any given time, the complete set of proteins expressed during a cell life cycle (1), or be used in a more specialised context: cell map proteomics ‘…defines all proteins within particular organelles to gain insight into cellular architecture and protein function’, whereas functional proteomics ‘…identifies proteins in a cell, tissue or organism that undergo changes in response to a
David Sheehan and Raymond Tyther (eds.), Methods in Molecular Biology, Two-Dimensional Electrophoresis Protocols, vol. 519 © Humana Press, a part of Springer Science + Business Media, LLC 2009 DOI: 10.1007/978-1-59745-281-6_1
3
4
Smith
specific biological condition’ (2). Proteomic research can be global or targeted, i.e. directed towards all proteins, or restricted to a well-defined group, such as glycoproteins, organelle proteins, or ribosomal proteins, respectively (3). Analysing the proteome also provides insights into gene product localisation, proteolysis, recycling, and sequestration (4). Thus proteomics is more than simply visualising the genome. In fact mRNA and protein expression are poorly related (5, 6), and the extensive and variable degree of post-translational modification means significantly more proteins may be expressed than are accounted for by the genome (7). Two-dimensional (2D) gel electrophoresis (2DE) can be used to address all of the above and is therefore now a central technique in proteomic research. Originally developed in 1975 (8, 9), the procedure has been summarised as isoelectric focusing (IEF) in a pH gradient, followed by separation on sodium dodecyl sulphate (SDS) polyacrylamide slab gels (SDS–PAGE) (10). Thus proteins are separated firstly according to molecular charge and secondly according to molecular mass. Since these are unrelated parameters, individual protein spots are resolved almost uniformly over the second-dimension gel (8), with each located at a unique pH/molecular mass coordinate. Some excellent reviews of 2DE have already been written (1, 11–13), and this chapter sets out to summarise the main principles, considerations, and indeed the limitations of the process, from initial tissue preparation to gel analysis.
2. Principles and Development of TwoDimensional Gel Electrophoresis Methodology 2.1. Protein Preparation and Solubilisation
Prior to electrophoresis complete protein solubilisation is essential (13). This is achieved by mechanical disruption in a solubilisation buffer, the purpose being the breakage of all non-covalent interactions, both between proteins and between proteins and non-proteinaceous molecules, and the reduction of disulphide bonds (14). This disaggregates all macromolecular complexes and reduces and denatures individual proteins or polypeptides (1). Solubilisation should be accomplished quickly, ideally using ice-cold buffer and chilled disruption apparatus. It is also important to prevent proteolysis, protein modification, or the introduction of artefacts (1, 14–16). High-quality reagents are required to make the buffer and solubilisation immediately before IEF is advisable (1). Interfering substances must also be removed or denatured, and protein solubility must be maintained throughout IEF. The composition of 2DE solubilisation buffer, which has remained relatively unchanged since the original investigation
Two-Dimensional Electrophoresis: An Overview
5
(8), is based on a neutral chaotrope, a neutral or zwitterionic detergent, and a reducing agent (1, 14). Urea (8 M) is the most common chaotrope, but because it is not so effective at breaking hydrophobic interactions, membrane proteins are relatively poorly solubilised. Although a urea/thiourea mixture increases the number of individual solubilised proteins (17), particularly membrane proteins (14), it is possible thiourea may reduce the resolution of some of the more acidic proteins. As a result the ideal proportions of urea and thiourea vary according to sample (18). The original detergents, Triton X-100 and Nonidet P-40, have largely been replaced by the zwitterionic cholamidosulphobetaine detergent 3-[3-cholamidopropyl dimethylammonio]1-propane sulphonate (CHAPS) (19) or by alkylsulphobetaine detergents (20), as these also improve membrane protein solubility. However these are less soluble in 8 M urea, and the trade-off for using a lower urea concentration is a reduction in overall protein solubilisation. SDS is also sometimes used and boiling with SDS, followed by dilution with urea or urea/ thiourea; both improve solubilisation and also inhibit proteases. However, to avoid interference during IEF, SDS must be displaced from proteins, by excessive dilution with neutral or zwitterionic detergents (21). The original reductant, 2-mercaptoethanol, has been replaced by dithiothreitol (DTT) or dithioerythreitol (DTE). With more insoluble samples tributyl phosphine (TBP) has also proved useful (22), but this is less stable, less soluble in aqueous solutions, and less able to maintain proteins in a reduced state. Protein solubility is also pH dependent, but care must be taken as high buffer concentrations interfere with IEF. For example, HEPES (being amphoteric) can focus within the pH gradient, thus preventing protein focusing in the resulting area of high conductivity, whilst Tris (being cationic) concentrations can increase at the cathode, thus reducing alkaline protein focusing. The latter can be corrected by using a spermine base (23). However, since the pH for optimal solubility differs between proteins, altering the buffer can result in differences in the final two-dimensional gel. 2.2. Removal of Interfering Substances
A number of non-proteinaceous compounds can interfere with one or other aspect of 2DE. Whereas some, such as hormones or simple sugars, do not cause an appreciable amount of interference (14), others can significantly affect protein solubilisation or final gel visualisation (1, 11, 12). Many small ionic metabolites accumulate at the anode or cathode during first-dimension IEF, thus adversely increasing conductivity and therefore reducing or eliminating focusing. A number of ion-removal methods use protein precipitation and resolubilisation based on, for example, trichloroacetic acid (TCA)
6
Smith
(24), acetone (25), ethanol or chloroform and methanol (26), or TCA and acetone (27–31), but these all risk protein loss (Note: TCA must be removed, by diethyl ether or acetone wash, before IEF). Commercially available de-salt columns offer a convenient solution, and an alternative to salt removal is to minimise salt inclusion from the outset, by using a low ionic strength washing buffer (e.g. Tris-buffered sorbitol). Nucleic acids increase the viscosity of the solubilised protein solution, thus reducing IEF efficiency, particularly in the acidic section, and can ‘clog’ the second-dimension gel pores. Nucleic acids can also combine with ampholytes (if used) to cause ‘streaking’ of the final gel. Both DNA and RNA can be removed by ultracentrifugation and the addition of a basic polyamine (spermine) (14), but this risks protein removal, especially those proteins bound to nucleic acids. The addition of RNase and DNase can reduce nucleic acid contamination, but the high urea concentration reduces enzyme activity. Additionally there is the consideration of introducing additional spots on the final gel. Lipids reduce protein solubility. However ensuring an adequate amount of detergent is present in the solubilisation buffer reduces the influence of lipids. Lipids can also be removed by the use of organic solvent (methanol or acetone) extraction, but again this can result in protein loss (12). Inhibiting protease activity is essential if proteolytic modifications are to be avoided and proteomic changes are to be confidently identified as genuine. Rapid solubilisation, under ice-cold conditions, minimises protease activity, as does boiling in ureafree SDS or adding Tris base (although high Tris concentrations can impede IEF). This can be augmented by the use of protease inhibitors (although their activity can be affected by DTT or DTE), such as phenylmethylsulphonyl fluoride (PMSF) and/or aminoethylbenzenesulphonyl fluoride (AEBSF). However these inhibitors can modify some proteins (16, 32). Interference from phenolic compounds is particular to plant proteomics. These can be removed by TCA protein precipitation and re-solubilisation (33), or adsorption onto polyvinylpyrrolidone (PVP) or polyvinylpolypyrrolidone (PVPP) (25). Alternatively the use of reductants (DTT and DTE) prevents protein oxidation from these compounds. 2.3. First-Dimension Isoelectric Focusing
The net charge of a protein molecule is pH-dependent. IEF exploits this amphoteric property by subjecting proteins contained in a pH gradient to a high voltage. Each protein then migrates to its isoelectric point (pI), i.e. the pH where the net charge is zero and the molecule is therefore immobilised. Originally this was carried out in polyacrylamide tube gels (8, 9, 34) and facilitated by carrier ampholytes, i.e. small amphoteric molecules with a high pH buffering capacity which, once a voltage
Two-Dimensional Electrophoresis: An Overview
7
is applied, ensure a smooth pH gradient is generated. However acrylamide tube gels are inconvenient and carrier ampholytes suffer from batch variation and reduced efficiency at extreme pHs (1). The most significant IEF development is the immobilised pH gradient (IPG) (35–37). IPGs employ ten acrylic derivatives (immobiline reagents): CH2=CH–CO–NH–R, where R = a carboxy or amino residue copolymerised with an acrylic matrix (11) resulting in a stable, consistent pH gradient (35, 38, 39). The greater accuracy of pI resolution by IPG strips was quickly realised (40, 41), as well as the possibility to employ a wider pH range than is possible with carrier ampholytes (1, 11). Additionally IPGs eliminate cathodic drift and can (depending on pH range) accommodate a greater total protein load (42). A wide pH range (4–11) can hold approximately 1 mg of total protein, whereas a narrow range (1 pH unit) can hold 10 mg (12). IPG strips also allow protein loading to be combined with gel rehydration. Typically protein samples are applied throughout the entire gradient. However ‘cup loading’ at the cathode (38) or, more usually, the anode, is required with basic pH gradients: pH 6–10, 7–10, or 6–12 (43). IEF time and temperature are critical. The optimal time is when IEF attains a steady state (37, 43, 44). Insufficient time causes horizontal streaking in the final gel, whilst excessively long IEF results in the phenomena known as electroendosmotic flow, i.e. water loss from the gel. If the temperature is too low, urea crystallisation can impede IEF, whilst IEF at too high a temperature causes protein carbamylation and inconsistent spot location on the final gel (44). A temperature of 20°C is best in terms of protein entry and mobility within the gradient. 2.4. IPG Strip Equilibration
IPG equilibration ensures that proteins are able fully to interact with SDS in the second dimension. Two equilibration buffers are involved: buffer 1 contains glycerol and urea, and reduces the electroendosmotic effect which can interrupt protein transfer to the second dimension (37); and buffer 2 contains iodoacetamide, in place of DTT, to prevent DTT streaking in the second-dimension gel (45). Inadequate equilibration, particularly with buffer 1, reduces protein transfer to the second-dimension gel (46).
2.5. SecondDimension Protein Separation
The second-dimension gel contains the anionic detergent SDS, which completes the protein unfolding initiated by DTT. Once completely unfolded, proteins are ellipsoid and contained in an SDS micelle. In this state the second-dimension gel is able to exploit the linear relationship between the log molecular mass and migration distance (47, 48) and thus separate by protein size. Two categories of second-dimension gel exist: homogenous and gradient. In both gel pore size is controlled by adjusting the
8
Smith
percentages of polyacrylamide and cross-linker. Homogenous gels contain the same percentage of acrylamide and cross-linker throughout, whereas gradient gels contain a variable percentage of cross-linker. The former gives the best resolution within a specific molecular size range, whilst the latter is best for running a wider range of protein sizes (1). Of the buffers used, Laemmli buffer (47) is the most common (49), but Tris–tricine improves the separation of smaller proteins (12). 2.6. Protein Spot Detection
After fixation, in an acetic acid, ethanol and water mixture, protein detection options include various staining techniques or, if radio-labelled proteins are involved, autoradiography, fluorography, and phosphor-imaging (50–52) (For extended reviews see refs.1, 12).
2.6.1. Gel Staining
Protein staining is by far the more common detection method. The least sensitive stain, Coomassie blue, is an anionic triphenylmethane dye which is electrostatically attracted to basic amino acids (53). Although staining 200 ng protein spot−1 or less has been reported (53), more usually 1 μg protein spot−1 is required. Coomassie blue is mass spectrometry compatible and, because of its colloidal nature, causes very little background staining. Ruthenium-based SYPRO stains also bind non-covalently to basic amino acids (54). These mass-spectrometry-compatible stains are more sensitive than Coomassie. Protein identifications are possible with 1–2 ng protein spot−1 (i.e. femtomole range, 55, 56) and have a wider dynamic range (the ability to stain in proportion to, and thus reflect, a wider range of protein quantities), thus greatly improving quantitative analysis of the proteome. Whilst Coomassie and SYPRO stains bind to the protein, negative staining uses the precipitation of insoluble imidazole zinc (57). Precipitation is slower where the gel is occupied by proteins, resulting in a “negative” appearance when imaged. Since there is very little interaction between stain and protein this technique is also mass spectrometry compatible. Sensitivity is between Coomassie and SYPRO staining (approximately 0.1 ng protein spot−1), but the poor linear range means it is less useful for quantitative analysis. Silver staining is the most sensitive, with detection of 0.1 ng protein spot−1 being possible. More than 100 variants of the original protocol (58) now exist (59), and these fall into two categories: silver nitrate with alkaline formaldehyde (60) and the more sensitive silver diamine salt complexed with ammonia (61). Both methods of silver staining are time consuming, and demand cleanliness and a high degree of reagent and water quality (>15 MΩcm). However the biggest disadvantage is that silver stains the surface molecules in a spot which usually renders the protein unsuitable for mass spectrometry analysis. Mass-spectrometry-compatible
Two-Dimensional Electrophoresis: An Overview
9
silver staining is possible (62, 63) but, since this is less sensitive than ammoniacal silver staining (62, 64–67) and has the same reagent and water purity demands, it is less popular than SYPRO staining. Like Coomassie blue, silver staining does not have the dynamic range of SYPRO stain and is only able to resolve a tenfold (as opposed to a 1,000-fold) variation in protein spot volume. 2.6.2. Gel Imaging, Protein Quantification, and Identification
Of the imaging methods available (68) the Charged Coupled Device (CCD) is probably the most versatile (1). When lightsensitive photosites are hit by photons they emit electrons which are counted by the CCD camera (13). Imaging is the first stage in converting analogue to digital data. Gaussian algorithms then quantify each protein spot according to a grey scale which can be analysed using the various two-dimensional gel software packages (see also Chapter “Troubleshooting Image Analysis in 2DE”). Detecting those protein spots which are either induced or deleted (i.e. absolute qualitative changes) is relatively straightforward. In theory, this imaging process should also allow the detection of quantitative changes to the proteome (i.e. changes in spot size, volume, or intensity, which reflect an up- or downregulation of a protein). However, in spite of the fact 2DE and image analysis are recognised as key technologies in measuring protein abundance (13), the question has been raised of whether limitations in dynamic ranges mean staining is strictly qualitative (12). Certainly this concern does have some merits and if twodimensional gels are to be analysed quantitatively the use of an optimal protein load combined with a wider dynamic range stain is definitely advantageous. Nevertheless, as long as a mass-spectrometry-compatible staining method is used, any changes in protein expression, detected by 2DE, can be identified by western blotting (69) (see also Chapter “Multivalent Protein Probes for the Identification and Characterization of Cognate Cellular Ligands for Myeloid Cell Surface Receptors”) and/or peptide analysis of excised protein spots, using mass spectrometry (4), combined with protein sequence database comparison (70)(see Chapter “Database Interrogation Algorithms for Identification of Proteins in Proteomic Separations”).
2.7. Difference Gel Electrophoresis
The key difference with difference gel electrophoresis (DIGE) is that the solubilised proteins are stained prior to IEF, with fluorescent cyanine dye N-hydroxy succininmidyl ester derivatives: Cy3 or Cy5 (71) (see Chapters “High-Resolution 2DE” and “TwoDimensional Difference Gel Electrophoresis”). Since Cy3 and Cy5 have different excitation and emission wavelengths, individual protein samples can be mixed, run on a single gel, and a direct comparison of protein expression made (72–74). The technique
10
Smith
can be made more robust by including a third dye (Cy2) (75). The major advantage of DIGE is the pooling of multiple samples on a single gel, thus reducing gel-to-gel variability as well as gel image analysis time. The technique is especially useful when a single experimental comparison is involved (72). Despite this, DIGE is not without limitations, such as selective labelling of proteins by one of the dyes, but this can be determined by comparing images of homogenous samples stained with each dye separately (76). More importantly it is essential each individual sample contains equal amounts of protein (76). Protein labelling efficiency is also critical, i.e. on ice, a buffer pH of 8–8.5, a minimum protein concentration of 5–10 mg/mL (minimum = 1 mg/mL), and the dye: protein ratio adjusted so each protein is labelled with a single dye molecule (72). Furthermore some protein solubilisation buffer reagents (e.g. Triton-X) can affect Cy labelling and nucleic acids should also be removed (76). However the major significant disadvantage of DIGE is sensitivity. Protein detection by DIGE requires approximately 2–10 ng protein spot−1 (i.e. less sensitive than SYPRO and silver staining) and the use of pooled samples can result in low abundance proteins, particularly those present in only a few individual samples, being diluted out (76). 2.8. Radio-Labelling and Protein Detection
Like staining, the methods of protein detection by radio-labelling also vary in terms of sensitivity and dynamic range. Autoradiography is perhaps the most common radiological detection method since it is possible to use a number of isotopes (32P, 125I, 14C, and 35 S) (16). However detection (i.e. exposure of the gel) can take days or, if a high degree of sensitivity is required, even weeks (16, 77), and another disadvantage is the low dynamic range. Both fluorography and phosphorimaging are more sensitive than autoradiography (12), and both work on the principle of detecting photons of light produced as a result of radio-labelling. With fluorography a scintillant is incorporated into the gel which is then exposed at sub-zero temperatures. With phosphorimaging the X-ray film is replaced with a europium salt phosphor screen (78). Luminescence is then proportional to the amount of radiation, which is in turn proportional to the amount of protein. Apart from increased sensitivity phosphorimaging also has a significantly greater dynamic range. However resolution is not as precise (12), making the visualisation of adjacent proteins more difficult. A radio-labelling/phosphorimaging technique which is analogous to DIGE is differential gel exposure (difExpo) (79). Proteins pre-labelled with 14C or 3H are mixed, run on 2DE, and then transferred to a PVDF membrane. Two phosphorimagers are then used, one sensitive to both isotopes and the other to 3H only. As is the case with DIGE, since these images are from the
Two-Dimensional Electrophoresis: An Overview
11
same gel they are perfectly superimposable and not susceptible to variability between gels.
3. TwoDimensional Gel Limitations and Challenges for Improving Proteomic Analysis
Proteomics, and therefore 2DE, is a discovery, not hypothesisbased discipline (3). Indeed this is perhaps the most fundamentally important feature of this undoubtedly powerful technique. However 2DE gels are limited by the amount of protein which can be loaded. Since the copy numbers of individual proteins can vary by many orders of magnitude it must be accepted that only a proportion of the complete proteome can therefore be resolved on a single gel. This is compounded by difficulty in resolving certain protein types (3, 12). In addition there is an inherent risk of error due to gel-to-gel variation. All have implications in terms of the final gel accurately reflecting the proteome, but selective protein resolution is probably the most significant. Apart from proteins present in low copy numbers, which are obviously less likely to be resolved, three protein groups are notoriously problematic: highly alkaline, extremely high and low molecular sizes, and membrane-bound proteins. Large proteins (150 kDa) tend to be hydrophobic making both solubilisation and IPG entry more difficult. However protein absorption by the pH gradient can be improved by “active re-swelling”, i.e. applying a low voltage (30–50 V) to the IPG strip during IPG rehydration (43, 80). Increasing the equilibration stage also improves transfer to the SDS–PAGE gel (12). Membrane-bound proteins, although not necessarily large, are also hydrophobic. Therefore effective solubilisation is again a major concern. In addition membrane proteins invariably have lower copy numbers than many cytoplasmic proteins which means they are poorly represented on two-dimensional gels. However, collectively, membrane proteins account for approximately 30% of the proteome. Therefore improving their inclusion on two-dimensional gels is regarded as the single largest concern for proteomic research (12). Despite this there are relatively few effective methods for collecting membrane proteins (reviewed in 81) although incorporating a primary solubilisation stage, before the use of a urea-based solubilisation buffer, has been shown to increase membrane protein yield (82). In general methods aimed at enhancing these more difficult-to-resolve proteins are based on improved protein solubilisation, pre-fractionation of protein groups of interest prior to 2DE, or adjustments to the 2DE regime.
12
Smith
TCA precipitation can be used to increase the proportion of alkaline proteins (30, 31, 80). Alkaline-protein-enriched samples can then be focussed using narrow (alkaline) pH range IEF (28, 29) (see later). Hydrophobic and membrane protein solubility is improved by the use of thiourea (83) or by changing the detergent. SDS is particularly suitable, but its incompatibility with IEF negates this advantage. However the zwitterionic detergent amidosulphobetaine is a useful alternative, especially when used in combination with a urea/thiourea mixture (84). More recently, use of the detergent 3-(4-heptyl)phenyl-3-hydroxypropyl) dimethylammoniopropanesulphonate (C7BzO), in combination with thiourea, in the solubilisation buffer and the use of increased SDS concentration in the equilibration buffer has been shown to significantly increase the number of alkaline proteins resolved from plant leafs (85). Pre-fractionation methods include protein separation by an additional electrophoresis procedure, chromatography, sequential extraction using a series of solubilisation buffers, centrifugation using gradients of alkaline buffers, or affinity purification (reviewed in 1, 12). Examples include the enrichment of low abundance proteins (26, 86), low molecular mass proteins (87), and membrane proteins (88–92), and proteins from specific organelles such as the endoplasmic reticulum (92). The alternative to enriching lower abundant proteins is to eliminate or deplete high abundance proteins. For example, commercially available albumin-removal kits are particularly useful for investigating tissue samples which have not been perfused prior to protein solubilisation. Adjustments to the 2DE regime, which are aimed at increasing the amount of the proteome resolved on the gel, tend to involve the IEF stage. Use of non-linear, or flattened, pH gradients allows greater resolution over selected pH ranges whilst still allowing the retention of a full range. This type of IPG strip is particularly useful for improving resolution of alkaline proteins (31), although the pH range can equally be extended within the acidic region (93). Extending the entire IPG separation distance also improves resolution across the entire pH range (94). An alternative approach is to use a series of full-length IPG strips, each containing a very limited pH range, i.e. IPGs of only 1 or 1.5 pH units. The final gel images are then electronically combined. These so-called “zoom” or “ultra-zoom” gels ( 80, 95–97) permit a larger amount of total protein to be resolved, which greatly increases the resolution of lower abundance proteins (46). Improving zoom gel resolution is increased further by combining this methodology with selective pre-fractionation (98). Thus the technology exists to optimise 2DE gels for most applications. The use of these specific methodologies and the appreciation of the general principles and techniques of 2DE are likely to maintain this technique as a leading contributor to proteomic research.
Two-Dimensional Electrophoresis: An Overview
13
References 1. Stochaj, W. R., Berkelman, T., and Laird, N. (2003) Preparative two-dimensional gel electrophoresis with immobilised pH gradients, in Proteins and Proteomics, A Laboratory Manual (Simpson, R. J., ed.), Cold Spring Harbor, New York, pp. 143–218 2. Graves, P. R., and Haystead, T. A. (2003) Proteomics and the Molecular Biologist. In Handbook of Proteomic Methods (Conn, P. M., ed.), Humana, New Jersey, pp. 3–16 3. Speicher, D. W. (2004) Overview of Proteome Analysis. In Proteome analysis: Interpreting the Genome (Speicher, D. W., ed.), Elsevier, Amsterdam, pp. 19–73 4. Pandey, A., and Mann, M. (2000) Proteomics to study genes and genomes. Nature 405, 837–846 5. Anderson, L., and Seilhamer, J. (1997) A comparison of selected mRNA and proteins abundance in human liver. Electrophoresis 18, 53–537 6. Gygi, S. P., Rochon, Y., Franza, B. R., and Abersold, R. (1999) Correlation between protein and mRNA abundance in yeast. Mol. Cell. Biol. 19, 1720–1730 7. Godley, A. A., and Packer, N. M. (1997) The Importance of protein co-and post-translational modifications in Proteome Projects. In Proteome Research: New Frontiers in Functional Genomics (Wilkins, M. R., Williams, K. L., Appel, R. D., and Hochstrasser, D. F., eds.), Springer, Berlin, pp. 65–91 8. O’Farrell, P. H. (1975) High resolution twodimensional electrophoresis of proteins. J. Biol. Chem. 250, 4007–4021 9. Klose, J. (1975) Protein mapping by combined isoelectric focussing and electrophoresis of mouse tissues. A novel approach to testing for induced point mutations in mammals. Humangenetik 26, 231–243 10. Fichmann, J., and Westermeier, R. (1998) 2-D protein gel electrophoresis. An overview. In Methods in Molecular Biology, Vol 112: 2-D Proteome Analysis Protocols (Link, A. J., ed), Humana Press inc, New Jersey 11. Görg, A., Drews, O., and Weiss, W. (2004) Separation of proteins using two-dimensional electrophoresis, in Purifying Proteins for Proteomics, A Laboratory Manual (Simpson, R. J., ed.), Cold Spring Harbor, New York, pp. 391–430 12. Görg, A., and Wiess, W. (2004) Protein profile comparisons of microorganisms, cells and tissues using 2D gels, in Proteome Analysis.
13.
14.
15.
16. 17.
18.
19.
20.
21.
22.
23.
Interpreting the Genome (Speicher, D. W., ed.), Elsevier, Amsterdam, pp. 19–73 Twyman, R. M. (ed.) (2004) Principles of Proteomics. Garland Science / Bios scientific publishers. New York. Rabilloud, T. (1999) Solubilization of proteins in 2-D electrophoresis. An outline. In Methods in Molecular Biology, Vol 112: 2-D Proteome Analysis Protocols (Link, A. J., ed.), Humana Press inc, NJ. Dunn, M. J. (1987) Two-dimensional gel electrophoresis, in Advances in Electrophoresis, Vol. 1 (Chrambach, A., Dunn, M. J., and Radola, B. J., eds.), VCH Weinheim, New York, pp. 1–109 Dunn, M. J. (1993) Gel Electrophoresis: Proteins. BIOS, Oxford. Rabilloud, T., Adessi, C., Giraudel, A., and Lunardi, J. (1997) Improvements of the solubilization of proteins in two-dimensional electrophoresis with immobilized pH gradients. Electrophoresis 18, 307–316 Musante, L., Candiano, G., and Chiggeri, G. M. (1997) Resolution of fibronectin and other uncharacterised proteins by two-dimensional polyacrylamide electrophoresis with thiourea. J. Chromatogr. 705, 351–356 Perdew, G. H., Schaup, H. W., and Selivonchick, D. P. (1983) The use of a zwitterionic detergent in two-dimensional gel electrophoresis of trout liver microsomes. Anal. Biochem. 135, 435–455 Adessi, C., Miege, C., Albrieux, C., and Rabilloud, T. (1997) Two-dimensional electrophoresis of membrane proteins: a current challenge for immobilized pH gradients. Electrophoresis 18, 127–135 Harder, A., Wildgruber, R. Nawrocki, A., Fey, S. J., Larsen, P. H., and Görg, A. (1999) Comparison of yeast cell protein solubilization procedures for two-dimensional electrophoresis. Electrophoresis 20, 826–829 Herbert, B. R., Molloy, M. P., Gooley, A. A., Walsh, B. J., Bryson, W. G., and Williams, K. L. (1998) Improved protein solubility in twodimensional electrophoresis using tributyl phosphine as the reducing agent. Electrophoresis 19, 845–851 Rabilloud, T., Valette, C., and Lawrence, J. J. (1994) Sample application by in-gel rehydration improves the resolution of two-dimensional electrophoresis with immobilized pH gradients in the first dimension. Electrophoresis 15, 1552–1558
14
Smith
24. Guy, C. R., Philip, R., and Tan, Y. H. (1994) Analysis of cellular phosphoproteins by twodimensional electrophoresis. Applications for cell signalling in normal and cancer cells. Electrophoresis 15, 417–440 25. Flengsrud, R., and Kobro, G. (1989) A method for two dimensional electrophoresis of proteins from green plant tissue. Anal. Biochem. 177, 33–36 26. Taylor, R. S., Wu, C. C., Hays, L. G., Eng, J. K., Yates, J. R. I., and Howell, K. E. (2000) Proteomics of rat liver Golgi complex: minor proteins are identified through sequential fractionation. Electrophoresis 21, 3441–3459 27. Damerval, C., de Vienne, D., Zivy, M., and Thiellement, H. (1986) Technical improvements in two-dimensional electrophoresis increase the level of genetic variation detected in wheat-seedling proteins. Electrophoresis 7, 52–54 28. Görg, A., Obermaier, C., Boguth, G., Csordas, A., Diaz, J. J., and Madjar, J. J. (1997) Very alkaline immobilized pH gradients for two-dimensional electrophoresis of ribosomal and nuclear proteins. Electrophoresis 18, 328–337 29. Görg, A. (1999) IPG-Dalt of very alkaline proteins, in Methods in Molecular Biology: 2-D Proteome Analysis Protocols, Vol. 112, pp. 197–209 (Link, A. J., ed.), Humana, New Jersey 30. Wildgruber, R., Reil, G., Drews, O., Parlar, H., and Görg, A. (2002) Web-based twodimensional database of Saccharomyces cerevisiae proteins using immobilized pH gradients from pH 6 to pH 12 and matrix-assisted laser desorption/ionization – time of flight mass spectrometry. Proteomics 2, 727–732 31. Görg, A., Boguth, G., Obermaier, C., and Weiss, W. (1998) Two-dimensional electrophoresis of proteins in an immobilized pH 4–12 gradient. Electrophoresis 19, 1516–1519 32. Olivieri, E., Herbert, B., and Righetti, P. G. (2001) The effect of protease inhibitors on the two-dimensional electrophoresis pattern of red blood cell membranes. Electrophoresis 22, 560–565 33. Grainer, F. (1988) Extraction of plant proteins for two-dimensional electrophoresis. Electrophoresis. 9, 712–718 34. Scheele, G. A. (1975) Two-dimensional gel analysis of soluble proteins. Characterization of guinea pig exocrine pancreatic proteins. J. Biol. Chem. 250, 5375–5385 35. Bjellqvist, B., Ek, K., Righetti, P. G., Gianazza, E., Görg, A., Westmeier, R., and Postel, W. (1982) Isoelectric focussing in immobilized
36.
37.
38.
39.
40.
41.
42.
43.
44. 45.
46.
pH gradients: principles, methodologies and some applications. J. Biochem. Biophys. Methods 6, 317–339 Görg, A., Postel, W., and Günther, S. (1985) Improved horizontal two-dimensional electrophoresis with immobilized pH gradients. Electrophoresis 6, 599–604 Görg, A., Postel, W., and Günther, S. (1988) The current state of two-dimensional electrophoresis with immobilized pH gradients. Electrophoresis 9, 531–546 Corbett, J. M., Dunn, M, J., Posch, A., and Görg, A. (1994) Positional reproducibility of protein spots in two-dimensional polyacrylamide gel electrophoresis using immobilised pH gradient isoelectric focussing in the first dimension: an interlaboratory comparison. Electrophoresis 15, 1205–1211 Blomberg, A., Blomberg, L., Norbeck, J., Fey, S. J., Larsen, P. H., Roepstorff, P., et al. (1995) Interlaboratory reproducibility of yeast protein patterns analysed by immobilized pH gradient two-dimensional gel electrophoresis. Electrophoresis 16, 1935–1945 Righetti, P. G., and Bossi, A. (1997) Review. Isoelectric focusing in immobilized pH gradients: an update. J. Chromatogr. B, 699, 77–89 Righetti, P. G., Gianazza, E., and Bjellqvist, B. (1983) Minireview. Modern aspects of isoelectric focusing: two-dimensional maps and immobilized pH gradients. J. Biochem. Biophys. Methods 8, 8–108 Bjellqvist, B., Sanchez, J. C., Pasquali, C., Ravier, F., Paquet, N., Frutiger, S., et al. (1993) Micropreparative two-dimensional electrophoresis allowing the separation of samples containing milligram amounts of proteins. Electrophoresis 14, 1375–1378 Görg, A., Obermaier, C., Boguth, G., Harder, A., Scheibe, B., Wildgruber, R., and Weiss, W. (2000) The current state of two-dimensional electrophoresis with immobilized pH gradients. Electrophoresis 21, 1037–1234 Görg, A. (1991) Two-dimensional electrophoresis. Nature 349, 545–546 Görg, A., Postel, W., Weser, J., Günther, S., Strahler, S. R., Hanash, S. M., and Somerlot, L. (1987) Elimination of point streaking on silver stained two-dimensional gels by addition of iodoacetamide to the equilibration buffer. Electrophoresis 8, 122–124 Zou, X., and Speicher, D. W. (2002) Comprehensive analysis of complex proteomes using microscale solution isoelectric focussing prior to narrow pH range two-dimensional electrophoresis. Electrophoresis 2, 58–68
Two-Dimensional Electrophoresis: An Overview 47. Laemmli, U. K. (1970) Cleavage of structural proteins during the assembly of the head of bacteriophage T4. Nature 227, 680–685 48. Weber, K., and Osborne, M. (1969) The reliability of molecular weight determination by dodecyl sulphate-polyacrylamide gel electrophoresis. J. Biol. Chem. 244, 4406–4412 49. Shägger, H., and von Jagow, G. (1987) Tricine-sodium dodecyl-polyacrylamide gel electrophoresis for the separation of proteins in the range from 1 to 1000 kDa. Anal. Biochem. 166, 368–379 50. Rabilloud, T. (2000) Detecting proteins separated by 2-D gel electrophoresis. Anal. Chem. 72, 48A–55A 51. Rabilloud, T., and Charmont, S. (2000) Detection of proteins on two-dimensional electrophoresis gels. In Proteome Research: Two Dimensional Electrophoresis and Identification Methods (Rabilloud, T., ed.), Springer, Berlin, pp. 107–126 52. Patton, W. F. (2002) Detection technologies in proteome analysis. J. Chromatogr. B. Anal. Technol. Biomed. Life Sci. 771, 3–31 53. Neuhoff, V., Arold, N., Taube, N., and Ehrhardt, W. (1988) Improved staining of proteins in polyacrylamide gels including isoelectric gels with clear background at nanogram sensitivity using Coomassie Brilliant Blue G-250 and R-250. Electrophoresis 9, 255–262 54. Lopez, M. F., Berggren, K., Chernokalskaya, E., Lazarev, A., Robinson, M., and Patton, W. (2000) A comparison of silver stain and SYPRO ruby protein gel stain with respect to protein detection in two-dimensional gels and identification by peptide mass profiling. Electrophoresis 21, 3673–3683 55. Gatlin, C. L., Kleeman, G. R., Hays, L. G., Link, A. J., and Yates, J. R. III (1998) Protein identification at the low femtomole level form silver-stained gels using and new fruitless electrospray interface for liquid chromatography microspray and nanospray mass spectrometry. Anal. Biochem. 263, 93–101 56. Jensen, O. N., Mortensen, P., Vorm, O., and Mann, M. (1997) Automation of matrixassisted laser desorption/ionization mass spectrometry using fuzzy logic feedback control. Anal. Chem. 69, 1706–1714 57. Castellanos-Serra, L., Proenza, W., Huerta, V., Moritz, R. L., and Simpson, R. L. (1999) Proteome analysis of polyacrylamide gel-separated proteins visualized by reversible negative staining using imidazole-zinc salts. Electrophoresis 20, 732–737 58. Switzer, R. C., Merril, C. R., and Shifrin, S. (1979) A highly sensitive silver stain for
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
15
detecting proteins and peptides in polyacrylamide gels. Anal. Biochem. 98, 321–327 Rabilloud, T., Vullard, L., Gilly, C., and Lawrence, J. J. (1994) Silver staining of proteins in polyacrylamide gels: a general overview. Cell. Mol. Biol. 40, 57–75 Merril, C. R., Goldman, D., Sedman, S. A., and Ebert, M. H. (1981) Ultrasensitive stain for proteins in polyacrylamide gels shows regional variation in cerebrospinal fluid proteins. Science 211, 1437–1438 Oakley, B. R., Kirsch, D. R., and Morris, N. R. (1980) A simplified ultrasensitive silver stain for detecting proteins in polyacrylamide gels. Anal. Biochem. 105, 361–363 Shevenko, A., Wilm, M., Vorm, O., and Mann, M. (1996) Mass spectrometric sequencing of protein silver-stained polyacrylamide gels. Anal. Chem. 68, 850–858 Mortz, E., Krogh, T. N., Vorum, H., and Görg, A. (2001) Improved silver staining protocols for high sensitivity protein identification using matrix-assisted laser desorption/ ionization time of flight analysis. Proteomics 1, 359–363 Yan, J. X., Walt, R., Berkelman, T., Harry, R. A., Westbrook, J. A., Wheeler, C. H., and Dunn, M. J. (2000) A modified silver staining protocol for visualization of proteins compatible with matrix-assisted laser desorption/ionization and electrospray mass spectrometry. Electrophoresis 21, 3666–3672 Scheler, C., Lamer, S., Pan, Z., Li, X., Salinkow, J., and Jungblut, P. (1998) Peptide mass fingerprint sequence coverage from differently stained proteins on two-dimensional electrophoresis patterns by matrix assisted laser desorption/ ionization – mass spectrometry (MALDI-MS). Electrophoresis 19, 918–927 Gharahdaghi, F., Weinberg, C. R., Meagher, D. A., Imai, B. S., and Mische, S. M. (1999) Mass spectrometric identification of proteins form silver-stained polyacrylamide gels: a method for the removal of silver ions to enhance sensitivity. Electrophoresis 20, 601–605 Sinha, P., Poland, J., Schnölzer, M., and Rabilloud, T. (2001) A new silver staining apparatus and procedure for matrix/ionization – time of flight analysis of proteins after two-dimensional electrophoresis. Proteomics 1, 835–840 Patton, W. F., Lim, M. J., and Shepro, D. (1999) Image acquisition in 2-D electrophoresis. Methods Mol. Biol. 112, 353–362 Celis, J. E., and Gromov, P. (1999) 2D protein electrophoresis: can it be perfected? Curr. Opin. Biotechnol. 10, 16–21
16
Smith
70. Sanchez, J-C., Chiappe, D., Converset, V., Hoogland, C, Binz, P-A., Appel, R. D., et al. (2001) The mouse SWISS-2D PAGE database: a tool for proteomics of diabetes and obesity. Proteomics 1, 136–163 71. Ünlü, M., Morgan, M. E., and Minden, J. S. (1997) Difference gel electrophoresis: a single gel method for detecting changes in protein extracts. Electrophoresis 18, 2071–2077 72. Tonge, R., Shaw, J., Middleton, B., Rowlinson, R., Rayner, S., Young, J., et al. (2001) Validation and development of fluorescence two-dimensional differential gel electrophoresis proteomics technology. Proteomics 1, 377–396 73. Zhou, G., Li, H., DeCamp, D., Chen, S., Shu, H., Gong, Y., Flaig, M., et al. (2002) 2-D differential in-gel electrophoresis for the identification of esophageal scans cell cancerspecific protein markers. Mol. Cell. Proteom. 1, 117–123 74. Gharbi, S., Gaffney, P., Yang, A., Zvelebil, M. J., Cramer, R., Waterfield, M. D., and Timms, J. F. (2002) Evaluation of two-dimensional differential gel electrophoresis for protein expression analysis of a model breast cancer cell system. Mol. Cell. Proteom. 1, 91–98 75. Alban, A., David, S. O., Bjorksten, L., Anderson, C., Sloge, E., Lewis, S., and Currie, I. (2003) A novel experimental design for comparative two-dimensional gel analysis: two-dimensional gel electrophoresis incorporating a pooled internal standard. Proteomics 3, 36–44 76. Hanlon, W. A., and Griffith, P. R. (2004) Protein profiling using two-dimensional gel electrophoresis with multiple fluorescent tags. In Proteome Analysis: Interpreting the Genome (Speicher, D. W., ed.), Elsevier, Amsterdam, pp. 19–73 77. Link, A. J. (1999) Autoradiography of 2D gels. Methods Mol. Biol. 112, 285–290 78. Patterson, S. D., and Latter, G. I. (1993) Evaluation of storage phosphor imaging for quantitative analysis of 2D gels using the Quat II system. Biotechniques 15, 1076–1083 79. Monribot-Espagne, C., and Boucherie, H. (2002) Differential gel exposure, a new methodology for the two-dimensional comparison of protein samples. Proteomics 2, 229–240 80. Görg, A., Obermaier, C., Boguth, G., and Weiss, W. (1999) Recent developments in two-dimensional gel electrophoresis with immobilized pH gradients: wide pH gradients up to pH 12, longer separation distances and simplified procedures. Electrophoresis 20, 712–717
81. Santoni, V., Rabilloud, T., Doumas, P., Rouqui, D., Mansion, M., Kieffers, S., et al. (1999) Towards the recovery of hydrophobic proteins on two-dimensional electrophoresis gels. Electrophoresis 20, 705–711 82. Schüpbach, J., Ammann, R. W., and Freiburghaus, A. U. (1991). A universal method for two-dimensional polyacrylamide gel electrophoresis of membrane proteins using isoelectric focusing on immobilized pH gradients in the first dimension. Anal. Biochem. 196, 337–343 83. Rabilloud, T. (1998) The use of thiourea to increase the solubility of membrane proteins in two-dimensional electrophoresis. Electrophoresis 19, 758–760 84. Chevallet, M., Santoni, V., Poinas, A., Rouquie, D., Fuchs, A., Kieffer, S., et al. (1998) New zwitterionic detergents improve the analysis of membrane proteins by two-dimensional electrophoresis. Electrophoresis 19, 1901–1090 85. Maserti, B. E., Della Croce, C. M., Luro, F., Morillon, R., Cini, M., and Caltavuturo L. (2007) A general method for the extraction of citrus leaf proteins and separation by 2D electrophoresis: A follow up. J. Chromatogr. B 849, 351–356 86. Fountoulakis, M., Juranville, J. F., Roder, D., Evers, S., Berndt, P., and Langen, H. (1998) Reference map of the low molecular mass proteins of Haemophilus influenzae. Electrophoresis 19, 1819–1827 87. Fountoulakis, M., Berndt, P., Langen, H., and Suter, L. (2007) The rat liver mitochondria proteins. Electrophoresis. 23, 311–328 88. Molloy, M. P., Herbert, B. R., Walsh, B. J., Tyler, M. I., Traini, M., Sanchez, J-C., et al. (1998) Extraction of membrane proteins by differential solubilisation for separation using twodimensional electrophoresis. Electrophoresis 19, 837–844 89. Nouwens, A. S., Cordwell, S. J., Larsen. M. R., Molloy, M. P., Gillings, M., Willcox, M. D., and Walsh, B. J. (2000) Complementary genomics with proteomics: the membrane bproteome of Pseudomonas aeroginosa PAO 1. Electrophoresis 21, 3797–3809 90. Molloy, M. P., Herbert, B. R., Williams, K. L., and Gooley, A. A. (1999) Extraction of Escherichia coli proteins with organic solvents prior to two-dimensional electrophoresis. Electrophoresis 20, 701–704 91. Ferro, M., Seigneurin-Berny, D., Rolland, N., Chapel, A., Salvi, D., Garin, J., and Joyard, J. (2000) Organic solvent extraction as a versatile procedure to identify hydrophobic chloroplast membrane proteins. Electrophoresis 21, 3517–3526
Two-Dimensional Electrophoresis: An Overview 92. Fujiki , Y. , Hubbard , A. L. , Fowler, S. , and Lazarow, P. B. (1982) Isolation of intracellular preparations by means of sodium carbonate treatment: applications to endoplasmic reticulum . J. Cell Biol. 93 , 97 – 102 93. Bjellqvist, B., Sanchez, J. C., Pasquali, C., Ravier, F., Pasquet, N., Frutiger, S., et al. (1993) A nonlinear wide-range immobilised pH gradient for two-dimensional electrophoresis and its definition in a relevant pH scale. Electrophoresis 14, 1357–1365 94. Poland, J., Cahill, M. A., and Sinha, P. (2003) Isoelectric focussing in long immobilized pH gradient gels to improve protein separation and proteome analysis. Electrophoresis 24, 1271–1275 95. Hoving, S., Voshol, H., and van Oostrum, J. (2000) Towards high performance two-
17
dimensional electrophoresis using ultrazoom gels. Electrophoresis 21, 2617–2621 96. Sabounchi-Schutt, F., Astrom, J., Eklund, A., Grunewald, J., and Bellqvist, B. (2001) Detection and identification of human bronchoalveolar lavage proteins using narrowrange immobilized pH gradient Drystrips and paper bridge sample application method. Electrophoresis 22, 1851–1860 97. Westbrook, J. A., Yan, J. X., Wait, R., Welson, S. Y., and Dunn, M. J. (2001) Zooming-in on the proteome: very narrow-range immobilised pH gradients reveal more protein species and isoforms. Electrophoresis 22, 2865–2871 98. Görg, A., Boguth, G., Köpf, A., Reil, G., Parlar, H., and Weiss, W. (2002) Sample preparation with Sephadex isoelectric focusing prior to narrow pH range two-dimensional gels. Proteomics 2, 1652–1657
Chapter 2 Solubilization of Proteins in 2DE: An Outline Thierry Rabilloud Summary Protein solubilization for two-dimensional electrophoresis (2DE) has to break molecular interactions to separate the biological contents of the material of interest into isolated and intact polypeptides. This must be carried out in conditions compatible with the first dimension of 2DE, namely isoelectric focusing. In addition, the extraction process must enable easy removal of any nonprotein component interfering with the isoelectric focusing. The constraints brought in this process by the peculiar features of isoelectric focusing are discussed, as well as their consequences in terms of possible solutions and limits for the solubilization process. Key words: Proteins, Two-dimensional electrophoresis, Solubilization, Isoelectric focusing, Extraction, Review.
1. Introduction The solubilization process for two-dimensional electrophoresis (2DE) has to achieve four parallel goals: 1. Breaking macromolecular interactions in order to yield separate polypeptide chains. This includes denaturing the proteins to break noncovalent interactions, breaking disulfide bonds, and disrupting noncovalent interactions between proteins and nonprotein components such as lipids or nucleic acids. 2. Preventing any artifactual modification of the polypeptides in the solubilization medium. Ideally, the perfect solubilization medium should freeze all the extracted polypeptides in their exact state prior to solubilization, both in terms of amino acid
David Sheehan and Raymond Tyther (eds.), Methods in Molecular Biology, Two-Dimensional Electrophoresis Protocols, vol. 519 © Humana Press, a part of Springer Science + Business Media, LLC 2009 DOI: 10.1007/978-1-59745-281-6_2
19
20
Rabilloud
composition and in terms of posttranslational modifications. This means that all the enzymes able to modify the proteins must be quickly and irreversibly inactivated. Such enzymes include of course proteases, which are the most difficult to inactivate, but also phosphatases, glycosidases, etc. In parallel, the solubilization protocol should not expose the polypeptides to conditions in which chemical modifications (e.g., deamidation of Asn and Gln, cleavage of Asp-Pro bonds) may occur. 3. Allowing the easy removal of substances that may interfere with 2DE. In 2DE, proteins are the analytes. Thus, anything in the cell but proteins can be considered as an interfering substance. Some cellular compounds (e.g., coenzymes, hormones) are so dilute they go unnoticed. Other compounds (e.g., simple nonreducing sugars) do not interact with proteins or do not interfere with the electrophoretic process. However, many compounds bind to proteins and/or interfere with 2DE, and must be eliminated prior to electrophoresis if their amount exceeds a critical interference threshold. Such compounds mainly include salts, lipids, polysaccharides (including cell walls), and nucleic acids. 4. Keeping proteins in solution during the 2DE process. Although solubilization stricto sensu stops at the point where the sample is loaded onto the first-dimension gel, its scope can be extended to the 2D process per se, as proteins must be kept soluble until the end of the second dimension. Generally speaking, the second dimension is an SDS gel, and very few problems are encountered once the proteins have entered this. The one main problem is overloading of the major proteins when micropreparative 2DE is carried out, and nothing but scaling up the SDS gel (its thickness and its other dimensions) can counteract overloading. However, severe problems can be encountered in the isoelectric focusing (IEF) step. They arise from the fact that IEF must be carried out in low ionic strength conditions and with no manipulation of the polypeptide charge. IEF conditions give problems at three stages: (a) During the initial solubilization of the sample, important interactions between proteins of widely different pI and/ or between proteins and interfering compounds (e.g., nucleic acids) may happen. This yields poor solubilization of some components. (b) During the entry of the sample in the focusing gel, there is a stacking effect due to the transition between a liquid phase and a gel phase with a higher friction coefficient. This stacking increases the concentration of proteins and may give rise to precipitation events. (c) At, or very close to, the isoelectric point, the solubility of the proteins comes to a minimum. This can be explained
Solubilization of Proteins in 2DE: An Outline
21
by the fact that the net charge comes close to zero, with a concomitant reduction of the electrostatic repulsion between polypeptides. This can also result in protein precipitation or adsorption to the IEF matrix. Apart from breaking molecular interactions and solubility in the 2DE gel which are common to all samples, the solubilization problems encountered will greatly vary from one sample type to another, due to wide differences in the amount and nature of interfering substances and/or spurious activities (e.g., proteases). The aim of this outline chapter is not to give detailed protocols for various sample types, and the reader should refer to the chapters of this book dedicated to the type of sample of interest. I would rather like to concentrate on the solubilization rationale and to describe nonstandard approaches to solubilization problems. A more detailed review on solubilization of proteins for electrophoretic analyses can be found elsewhere (1).
2. Rationale of SolubilizationBreaking Molecular Interactions
Apart from disulfide bridges, the main forces holding proteins together and allowing binding to other compounds are noncovalent interactions. Covalent bonds are encountered mainly between proteins and some coenzymes. The noncovalent interactions are mainly ionic bonds, hydrogen bonds, and “hydrophobic interactions.” The basis for “hydrophobic interactions” is in fact the presence of water. In this very peculiar (hydrogen-bonded, highly polar) solvent, the exposure of nonpolar groups to the solvent is thermodynamically not favored compared to the grouping of these apolar groups together. Indeed, although the van der Waals forces give an equivalent contribution in both configurations, the other forces (mainly hydrogen bonds) are maximized in the latter configuration and disturbed in the former (solvent destruction). Thus, the energy balance is clearly in favor of the collapse of the apolar groups together (2). This explains why hexane and water are not miscible, and also that the lateral chain of apolar amino acids (L, V, I, F, W, Y) pack together and form the hydrophobic cores of proteins (3). These hydrophobic interactions are also responsible for some protein–protein interactions and for the binding of lipids and other small apolar molecules to proteins. The constraints for a good solubilization medium for 2DE are therefore to be able to break ionic bonds, hydrogen bonds, hydrophobic interactions, and disulfide bridges under conditions compatible with IEF, i.e., with very low amounts of salt or other charged compounds (e.g., ionic detergents).
22
Rabilloud
2.1. Disruption of Disulfide Bridges
Breaking of disulfide bridges is usually achieved by adding to the solubilization medium an excess of a thiol compound. Mercaptoethanol was used in the first 2D protocols (4), but its use does have drawbacks. Indeed, a portion of the mercaptoethanol will ionize at basic pH, enter the basic part of the IEF gel, and ruin the pH gradient in its alkaline part because of its buffering power (5). Although its pK is around 8, dithiothreitol (DTT) is much less prone to this drawback, as it is used at much lower concentrations (usually 50 mM instead of the 700 mM present in 5% mercaptoethanol). However, DTT is still not the perfect reducing agent. Some proteins of very high cysteine content or with cysteines of very high reactivity are not fully reduced by DTT. In these cases, phosphines are very often an effective answer. First, the reaction is stoichiometric, which allows us in turn to use very low concentrations (a few mM). Second, these reagents are not as sensitive as thiols to dissolved oxygen. The most powerful compound is tributylphosphine, which was the first phosphine used for disulfide reduction in biochemistry (6). However, this reagent is volatile, toxic, has a rather unpleasant odor, and needs an organic solvent to make it water miscible. In the first uses of the reagent, propanol was used as a carrier solvent at rather high concentrations (50%) (6). It was however found that DMSO or DMF are suitable carrier solvents, which enable the reduction of proteins by 2 mM tributylphosphine (7). All these drawbacks have disappeared with the introduction of a water-soluble phosphine, tris (carboxyethyl) phosphine, for which 1 M aqueous stock solutions can be easily prepared and stored frozen in aliquots.
2.2. Disruption of Noncovalent Interactions
The perfect way to disrupt all types of noncovalent interactions would be the use of a charged compound that disrupts hydrophobic interactions by providing a hydrophobic environment. The hydrophobic residues of the proteins would be dispersed in that environment and not clustered together. This is just the description of SDS, and this explains why SDS has been often used in the first stages of solubilization (8–11). However, SDS is not compatible with IEF and must be removed from the proteins during IEF (see later). The other way of breaking most noncovalent interactions is the use of a chaotrope. It must be kept in mind that all the noncovalent forces keeping molecules together must be taken into account with a comparative view on the solvent. This means that the final energy of interaction depends on the interaction per se and on its effects on the solvent. If the solvent parameters are changed (dielectric constant, hydrogen bond formation, polarizability, etc.), all the resulting energies of interaction will change. Chaotropes, which alter all the solvent parameters, exert profound effects on all types of interactions. For example, by changing the hydrogen bond structure of the solvent, chaotropes disrupt
Solubilization of Proteins in 2DE: An Outline
23
hydrogen bonds but also decrease the energy penalty for exposure of apolar groups and therefore favor the dispersion of hydrophobic molecules and the unfolding of the hydrophobic cores of a protein (12). Protein unfolding will also greatly decrease ionic bonds between proteins, which are very often not very numerous and highly dependent of the correct positioning of the residues. As the gross structure of proteins is driven by hydrogen bonds and hydrophobic interactions, chaotropes decrease dramatically ionic interactions both by altering the dielectric constant of the solvent and by denaturing the proteins, so that the residues will no longer be positioned correctly. Nonionic chaotropes, as those used in 2DE, however, are unable to disrupt ionic bonds when high charge densities are present (e.g., histones, nucleic acids) (13). In this case, it is often quite advantageous to modify the pH and to take advantage of the fact that the ionizable groups in proteins are weak acids and bases. For example, increasing the pH to 10 or 11 will induce most proteins to behave as anions, so that ionic interactions present at pH 7 or lower turn into electrostatic repulsion between the molecules, thereby promoting solubilization. The use of a high pH results therefore in dramatically improved solubilizations, with yields very close to what is obtained with SDS (14). The alkaline pH can be obtained either by addition of a few mM of potassium carbonate to the urea–detergent–ampholytes solution (14), by the use of alkaline ampholytes (11), or by the use of a spermine-DTT buffer which allows better extraction of nuclear proteins (15). For 2DE, the chaotrope of choice is urea. Although urea is less efficient than substituted urea in breaking hydrophobic interactions (12), it is more efficient in breaking hydrogen bonds, so that its overall solubilization power is greater. However, denaturation by urea induces the exposure of the totality of the proteins hydrophobic residues to the solvent. This increases, in turn, the potential for hydrophobic interactions so that urea alone is often not sufficient to quench completely the hydrophobic interactions especially when lipids are present in the sample. This explains why detergents, which can be viewed as specialized agents for hydrophobic interactions, are almost always included in the urea-based solubilization mixtures for 2DE. Detergents act on hydrophobic interactions by providing a stable dispersion of a hydrophobic medium in the aqueous medium, through the presence of micelles for example. Therefore, hydrophobic molecules (e.g., lipids) are no longer collapsed in the aqueous solvent but will disaggregate in the micelles, provided the amount of detergent is sufficient to ensure maximal dispersion of the hydrophobic molecules. Detergents have polar heads that are able to contract other types of noncovalent bonds (hydrogen bonds, salt bonds for charged heads, etc.). The action of detergents is the sum of the dispersive
24
Rabilloud
effect of the micelles on hydrophobic part of the molecules and the effect of their polar heads on the other types of bonds. This explains why various detergents show very variable effects varying from a weak and often incomplete delipidation (e.g., Tweens) to a very aggressive action where the exposure of the hydrophobic core in the detergent-containing solvent is no longer energetically unfavored and leads to denaturation (e.g., SDS). Of course, detergents used for IEF must bear no net electrical charge, and only nonionic and zwitterionic detergents may be used. However, ionic detergents such as SDS may be used for the initial solubilization, prior to isoelectric focusing, in order to increase solubilization and facilitate the removal of interfering compounds. Low amounts of SDS can be tolerated in the subsequent IEF (10) provided that high concentrations of urea (16) and nonionic (10) or zwitterionic detergents (17) are present to ensure complete removal of the SDS from the proteins during IEF. Higher amounts of SDS must be removed prior to IEF, by precipitation (9), for example. It must therefore be kept in mind that SDS will only be useful for solubilization and for sample entry, but will not cure isoelectric precipitation problems. The use of nonionic or zwitterionic detergents in the presence of urea presents some problems due to the presence of urea itself. In concentrated urea solutions, urea is not freely dispersed in water but can form organized channels (18). These channels can bind linear alkyl chains, but not branched or cyclic molecules, to form complexes of undefined stoichiometry called inclusion compounds. These complexes are much less soluble than the free solute, so that precipitation is often induced upon formation of the inclusion compounds, precipitation being stronger with increasing alkyl chain length and higher urea concentrations. Consequently, many nonionic or zwitterionic detergents with linear hydrophobic tails (19, 20) and some ionic ones (21) cannot be used in the presence of high concentrations of urea. This limits the choice of detergents mainly to those with nonlinear alkyl tails (e.g., Tritons, Nonidet P40, CHAPS) or with short alkyl tails (e.g., octyl glucoside), which are unfortunately less efficient in quenching hydrophobic interactions. Sulfobetaine detergents with long linear alkyl tails have however received limited applications, as they require low concentrations of urea. Good results have been obtained in certain cases for sparingly soluble proteins (22–24), although this type of protocol seems rather delicate owing to the need for a precise control of all parameters to prevent precipitation. Apart from the problem of inclusion compounds, the most important problem linked with the use of urea is carbamylation. Urea in water exists in equilibrium with ammonium cyanate, the level of which increases with increasing temperature and pH (25). Cyanate can react with amines to yield substituted urea.
Solubilization of Proteins in 2DE: An Outline
25
In the case of proteins, this reaction takes place with the α-amino group of the N-terminus and the ε-amino groups of lysines. This reaction leads to artifactual charge heterogeneity, N-terminus blocking, and adduct formation detectable in mass spectrometry. Carbamylation should therefore be completely avoided. This can be easily made with some simple precautions. The use of a pure grade of urea (p.a.) decreases the amount of cyanate present in the starting material. Avoidance of high temperatures (never heat urea-containing solutions above 37°C) considerably decreases cyanate formation. In the same way, urea-containing solutions should be stored frozen (−20°C) to limit cyanate accumulation. Last but not least, a cyanate scavenger (primary amine) should be added to urea-containing solutions. In the case of IEF, carrier ampholytes are perfectly suited for this task. If these precautions are correctly taken, proteins seem to withstand long exposures to urea without carbamylation (26).
3. Solubility During IEF Additional solubility problems often arise during the IEF at sample entry and solubility at the isoelectric point. 3.1. Solubility During Sample Entry
Sample entry is often quite critical. In most 2DE systems, sample entry in the IEF gel corresponds to a transition between a liquid phase (the sample) and a gel phase of higher friction coefficient. This induces a stacking of the proteins at the sample-gel boundary, which results in very high concentration of proteins at the application point. These concentrations may exceed the solubility threshold of some proteins, thereby inducing precipitation and sometimes clogging of the gel, with poor penetration of the bulk of proteins. Such a phenomenon is of course more prominent when high amounts of proteins are loaded onto the IEF gel. The sole simple but highly efficient remedy to this problem is to include the sample in the IEF gel. This process abolishes the liquid–gel transition and decreases the overall protein concentration, as the volume of the IEF gel is generally much higher than the one of the sample. This process is however rather difficult for tube gels in carrier ampholyte-based IEF. The main difficulty arises from the fact that the thiol compounds used to reduce disulfide bonds during sample preparation are strong inhibitors of acrylamide polymerization, so that conventional samples cannot be used as such. Alkylation of cysteines and of the thiol reagent after reduction could be a solution, but many neutral alkylating agents (e.g., iodoacetamide, N-ethyl maleimide) also inhibit acrylamide
26
Rabilloud
polymerization. Owing to this situation, most workers describing inclusion of the sample within the IEF gel have worked with nonreduced samples (27, 28). Although this presence of disulfide bridges is not optimal, inclusion of the sample within the gel has proven of great but neglected interest (27, 28). It must however be pointed out that it is now possible to carry out acrylamide polymerization in an environment where disulfide bridges are reduced. The key is to use 2 mM tributylphosphine as the reducing agent in the sample and using tetramethylurea as a carrier solvent. This ensures total reduction of disulfides and is totally compatible with acrylamide polymerization with the standard Temed/persulfate initiator (T. Rabilloud, unpublished results). This modification should help the experimenters trying sample inclusion within the IEF gel when high amounts of proteins are to be separated by 2DE. The process of sample inclusion within the IEF gel is however much simpler for IPG gels. In this case, rehydration of the dried IPG gel in a solution containing the protein sample is quite convenient and efficient, provided that the gel has a sufficiently open structure to be able to absorb proteins efficiently (15). Coupled with the intrinsic high capacity of IPG gels, this procedure enables to easily separate milligram amounts of protein (15). 3.2. Solubility at the Isoelectric Point
This is usually the second critical point for IEF. The isoelectric point is the pH of minimal solubility, mainly because the protein molecules have no net electrical charge. This abolishes the electrostatic repulsion between protein molecules, which maximizes in turn protein aggregation and precipitation. The horizontal comet shapes frequently encountered for major proteins and for sparingly soluble proteins often arise from such a near-isoelectric precipitation. Such isoelectric precipitates are usually easily dissolved by the SDS solution used for the transfer of the IEF gel onto the SDS gel, so that the problem is limited to a loss of resolution, which however precludes the separation of high amounts of proteins. The problem is however more severe for hydrophobic proteins when an IPG is used. In this case, a strong adsorption of the isoelectric protein to the IPG matrix seems to occur, which is not reversed by incubation of the IPG gel in the SDS solution. The result is severe quantitative losses, which seem to increase with the hydrophobicity of the protein and the amount loaded (29). The sole solution to this serious problem is to increase the protein solubilizing power of the medium used for IEF, by acting both on the chaotrope and on the detergent. As to the chaotrope, it has been shown that using a mixture of urea and thiourea increases protein solubility (30). On a molar basis, thiourea has been shown to be a much stronger denaturant than urea itself (31). Thiourea alone is weakly soluble in
Solubilization of Proteins in 2DE: An Outline
27
water (ca 1 M), so that it cannot be used as the sole chaotrope. However, thiourea is more soluble in concentrated urea solutions (31). Consequently, urea–thiourea mixtures (typically 2 M thiourea and 5–8 M urea, depending on the detergent used) exhibit a superior solubilizing power and are able to increase dramatically the solubility of membrane or nuclear proteins in IPG gels as well as protein transfer to the second-dimension SDS gel (30). The benefits of using thiourea–urea mixtures to increase protein solubility can be transposed to conventional, carrier ampholyte-based focusing in tube gels with minor adaptations. Thiourea strongly inhibits acrylamide polymerization with the standard TEMED/persulfate system. However, photopolymerization with methylene blue, sodium toluene sulfinate, and diphenyl iodonium chloride (32) enables acrylamide polymerization in the presence of 2 M thiourea without any deleterious effect in the subsequent 2DE (33) so that higher amounts of proteins can be loaded without loss of resolution (33). As to the detergent, considerable interest has been shown in this field due to its potential application for the solubilization of membrane proteins (34). It must be kept in mind, however, that the detergents used in denaturing IEF must work in high concentrations of urea. On the one hand, this poses the problem of inclusion compounds, as described earlier. On the other, this highly chaotropic mixture changes dramatically the detergent aggregations parameters (critical micellar concentration, critical micellar temperature) and thus the detergent properties. This can be favorable in some cases, e.g., with deoxychaps which cannot be used in water alone due to its high critical micellar temperature (55°C), while it can be used in 8 M urea where it is fully soluble at room temperature (35). Investigations in the field of detergents for denaturing IEF have concerned the two families that are compatible with IEF, namely zwitterionic detergents and nonionic ones. Sulfobetaines with various hydrophobic parts and/or linkers between the hydrophobic and hydrophilic parts have been synthesized and tested (35–37). Some of them have shown interesting solubilizing properties, such as ASB14 and C7BzO, and are now commercially available. Besides work on this particular detergent family, there has been a renewal of interest in non-ionic detergents, and some of them have been shown to be able to solubilize membrane proteins (38–40). From this, the importance of the detergent/chaotrope couple is clearly highlighted. For example, Triton X100 has been used in conjunction with urea since the very beginning of 2DE and has not been shown to solubilize any membrane protein. However, when Triton X100 is used with a urea/thiourea mixture, it has been shown to solubilize some membrane proteins efficiently (38).
28
Rabilloud
4. Concluding Remarks Although this outline chapter has mainly dealt with the general aspects of solubilization, the main concluding remark is that there is no universal solubilization protocol. Standard urea-reducerdetergent mixtures usually achieve disruption of disulfide bonds and noncovalent interactions. Consequently, the key issues for a correct solubilization are removal of interfering compounds, blocking of protease action, and disruption of infrequent interactions (e.g. strong ionic bonds). These bonds will greatly depend on the type of sample used, the proteins of interest, and the amount to be separated, so that the optimal solubilization protocol can vary greatly from one sample to another. However, the most frequent bottleneck for the efficient 2DE separation of as many and as much proteins as possible does not usually lie in the initial solubilization but in keeping the solubility along the IEF step. In this field, the key feature is the disruption of hydrophobic interactions, which are responsible for most, if not all, of the precipitation phenomena encountered during IEF. This means improving solubility during denaturing IEF will focus on the quest forever more powerful chaotropes and detergents. In this respect, the use of thiourea may prove to be one of the keys to increase the solubility of proteins in 2DE. One of the other keys being the use of as powerful detergent or detergent mixture as possible. In a complex sample, some proteins may be well denatured and solubilized by a given detergent or chaotrope, while other proteins will require another detergent or chaotrope. Consequently, the future of solubilization may well be to find mixtures of detergents and chaotropes able to cope with the diversity of proteins encountered in the complex samples separated by 2DE. It must be kept in mind, however, that this protein diversity may overcome the solubilization power that is achievable with chemicals bearing no electrical charge, as in the case of IEF. When hydrophobic proteins are to be analyzed, it may be a safer approach to use ionic detergents. These have a much higher solubilizing power, as they confer a net electrical charge to the protein–detergent complexes, and the Coulombian repulsion between the protein detergent complexes prevents aggregation and promotes solubilization. The price to pay is to renounce IEF and to use electrophoresis schemes of much lower resolution (41). However, such electrophoresis schemes using only ionic detergents have been shown to be able to deal with very hydrophobic proteins (42).
Solubilization of Proteins in 2DE: An Outline
29
References 1. Rabilloud, T. (1996) Solubilization of proteins for electrophoretic analyses. Electrophoresis 17, 813–829 2. Tanford, C. (1980) The Hydrophobic Effect, 2nd edn, Wiley, New York 3. Dill, K.A. (1985) Theory for the folding and stability of globular proteins. Biochemistry 24, 1501–1509 4. O’Farrell, P.H. (1975) High resolution twodimensional electrophoresis of proteins. J. Biol. Chem. 250, 4007–4021 5. Righetti, P.G., Tudor, G., and Gianazza, E. (1982) Effect of 2 mercaptoethanol on pH gradients in isoelectric focusing. J. Biochem. Biophys. Methods 6, 219–227 6. Ruegg, U.T., and Rüdinger, J. (1977) Reductive cleavage of cystine disulfides with tributylphosphine. Methods Enzymol. 47, 111–116 7. Kirley, T.L. (1989) Reduction and fluorescent labeling of cyst(e)ine containing proteins for subsequent structural analysis. Anal. Biochem. 180, 231–236 8. Wilson, D., Hall, M.E., Stone, G.C., and Rubin, R.W. (1977) Some improvements in two-dimensional gel electrophoresis of proteins. Anal. Biochem. 83, 33–44 9. Hari, V. (1981) A method for the two-dimensional electrophoresis of leaf proteins. Anal. Biochem. 113, 332–335 10. Ames, G.F.L., and Nikaido, K. (1976) Twodimensional electrophoresis of membrane proteins. Biochemistry 15, 616–623 11. Hochstrasser, D.F., Harrington, M.G., Hochstrasser, A.C., Miller, M.J., and Merril, C.R. (1988) Methods for increasing the resolution of two dimensional protein electrophoresis. Anal. Biochem. 173, 424–435 12. Herskovits, T.T., Jaillet, H., and Gadegbeku, B. (1970) On the structural stability and solvent denaturation of proteins. II. Denaturation by the ureas. J. Biol. Chem. 245, 4544–4550 13. Sanders, M.M., Groppi, V.E., and Browning, E.T. (1980) Resolution of basic cellular proteins including histone variants by two-dimensional gel electrophoresis: Evaluation of lysine to arginine ratios and phosphorylation. Anal. Biochem. 103, 157–165 14. Horst, M.N., Basha, M.M., Baumbach, G.A., Mansfield, E.H., and Roberts, R.M. (1980) Alkaline urea solubilization, two-dimensional electrophoresis and lectin staining of mammalian cell plasma membrane and plant seed proteins. Anal. Biochem. 102, 399–408
15. Rabilloud, T., Valette, C., and Lawrence, J.J. (1994) Sample application by in-gel rehydration improves the resolution of two-dimensional electrophoresis with immobilized pH gradients in the first dimension. Electrophoresis 15, 1552–1558 16. Weber, K., and Kuter, D.J. (1971) Reversible denaturation of enzymes by sodium dodecyl sulfate. J. Biol. Chem. 246, 4504–4509 17. Remy, R., and Ambard-Bretteville, F. (1987) Two-dimensional electrophoresis in the analysis and preparation of cell organelle polypeptides. Methods Enzymol. 148, 623–632 18. March, J. (1977) Advanced Organic Chemistry, 2nd edn, McGraw-Hill, London, pp. 83–84 19. Dunn, M.J., and Burghes, A.H.M. (1983) High resolution two-dimensional polyacrylamide electrophoresis. I. Methodological procedures. Electrophoresis 4, 97–116 20. Rabilloud, T., Gianazza, E., Catto, N., and Righetti, P.G. (1990) Amidosulfobetaines, a family of detergents with improved solubilization properties: application for isoelectric focusing under denaturing conditions. Anal. Biochem. 185, 94–102 21. Willard, K.E., Giometti, C., Anderson, N.L., O’Connor, T.E., and Anderson, N.G. (1979) Analytical techniques for cell fractions. XXVI. A two-dimensional electrophoretic analysis of basic proteins using phosphatidyl choline/ urea solubilization. Anal. Biochem. 100, 289–298 22. Clare Mills, E.N., and Freedman, R.B. (1983) Two-dimensional electrophoresis of membrane proteins. Factors affecting resolution of rat liver microsomal proteins. Biochim. Biophys. Acta 734, 160–167 23. Satta, D., Schapira, G., Chafey, P., Righetti, P.G., and Wahrmann, J.P. (1984) Solubilization of plasma membranes in anionic, non ionic and zwitterionic surfactants for iso-dalt analysis: a critical evaluation. J. Chromatogr. 299, 57–72 24. Gyenes, T., and Gyenes, E. (1987) Effect of stacking on the resolving power of ultrathin layer two-dimensional gel electrophoresis. Anal. Biochem. 165, 155–160 25. Hagel, P., Gerding, J.J.T., Fieggen, W., and Bloemendal, H. (1971) Cyanate formation in solutions of urea. I. Calculation of cyanate concentrations at different temperature and pH. Biochim. Biophys. Acta 243, 366–373 26. Bjellqvist, B., Sanchez, J.C., Pasquali, C., Ravier, F., Paquet, N., Frutiger, S., et al. (1993)
30
27.
28.
29.
30.
31.
32.
33.
34.
35.
Rabilloud Micropreparative two-dimensional electrophoresis allowing the separation of samples containing milligram amounts of proteins. Electrophoresis 14, 1375–1378 Chambers, J.A.A., Degli Innocenti, F., Hinkelammert, K., and Russo, V.E.A. (1985) Factors affecting the range of pH gradients in the isoelectric focusing dimension of twodimensional gel electrophoresis: the effect of reservoir electrolytes and loading procedures. Electrophoresis 6, 339–348 Semple-Rowland, S.L., Adamus, G., Cohen, R.J. and Ulshafer, R.J. (1991) A reliable twodimensional gel electrophoresis procedure for separating neural proteins. Electrophoresis 12, 307–312 Adessi, C., Miege, C., Albrieux, C., and Rabilloud, T. (1997) Two-dimensional electrophoresis of membrane proteins: a current challenge for immobilized pH gradients. Electrophoresis 18, 127–135 Rabilloud, T., Adessi, C., Giraudel, A., and Lunardi, J. (1987) Improvement of the solubilization of proteins in two-dimensional electrophoresis with immobilized pH gradients. Electrophoresis 18, 307–316 Gordon, J.A., and Jencks, W.P. (1963) The relationship of structure to effectiveness on denaturing agents for proteins. Biochemistry 2, 47–57 Lyubimova, T., Caglio, S., Gelfi, C., Righetti, P.G. and Rabilloud, T. (1993) Photopolymerization of polyacrylamide gels with methylene blue. Electrophoresis 14, 40–50 Rabilloud, T. (1998) Use of thiourea to increase the solubility of membrane proteins in two-dimensional electrophoresis. Electrophoresis 19, 758–760 Santoni, V., Molloy, M., and Rabilloud, T. (2000) Membrane proteins and proteomics: un amour impossible? Electrophoresis 21, 1054–1070 Chevallet, M., Santoni, V., Poinas, A., Rouquie, D., Fuchs, A., Kieffer, S., et al. (1998)
36.
37.
38.
39.
40.
41.
42.
New zwitterionic detergents improve the analysis of membrane proteins by two-dimensional electrophoresis. Electrophoresis 19, 1901–1909 Rabilloud, T., Blisnick, T., Heller, M., Luche, S., Aebersold, R., Lunardi, J., et al. (1999) Analysis of membrane proteins by two-dimensional electrophoresis: comparison of the proteins extracted from normal or Plasmodium falciparum-infected erythrocyte ghosts. Electrophoresis 20, 3603–3610 Tastet, C., Charmont, S., Chevallet, M., Luche, S., and Rabilloud, T. (2003) Structure-efficiency relationships of zwitterionic detergents as protein solubilizers in two-dimensional electrophoresis. Proteomics 3, 111–121 Luche, S., Santoni, V., and Rabilloud, T. (2003) Evaluation of nonionic and zwitterionic detergents as membrane protein solubilizers in two-dimensional electrophoresis. Proteomics 3, 249–253 Taylor, C.M., and Pfeiffer, S.E. (2003) Enhanced resolution of glycosylphosphatidylinositolanchored and transmembrane proteins from the lipid-rich myelin membrane by twodimensional gel electrophoresis. Proteomics 3, 1303–1312 Lescuyer, P., Strub, J.M., Luche, S., Diemer, H., Martinez, P., Van Dorsselaer, A., et al. (2003) Progress in the definition of a reference human mitochondrial proteome. Proteomics 3, 157–167 MacFarlane, D.E. (1989) Two dimensional benzyldimethyl-n-hexadecylammonium chloride-sodium dodecyl sulfate preparative polyacrylamide gel electrophoresis: a high capacity high resolution technique for the purification of proteins from complex mixtures. Anal. Biochem. 176, 457–463 Burre, J., Beckhaus, T., Schagger, H., Corvey, C., Hofmann, S., Karas, M., et al. (2006) Analysis of the synaptic vesicle proteome using three gel-based protein separation techniques. Proteomics 6, 6250–6262
Chapter 3 Selection of pH Ranges in 2DE Mireille Starita-Geribaldi Summary This chapter describes the technical improvements of the two-dimensional electrophoresis pattern resulting of an optimized pH range in the first dimension. Various types of pH gradients are available. Different strategies can be applied in order to select the pH ranges for the exploration of a proteome. The resulting gels are analysed for their background, resolution, sensitivity in relation with the sample complexity. As the complete dynamic range of protein expression cannot be visualized, the high loading capacity of immobilized narrow pH gradients can be used. The limitations and possible enhancements are discussed. Key words: Basic pH gradient, Immobilized pH gradient, Narrow pH gradient, Overlapping, Resolution, Sensitivity, Two-dimensional gel electrophoresis, Wide pH gradient, Zoom gel, Review.
1. Introduction Two-dimensional gel electrophoresis (2DE) is the only proven method for simultaneously separating thousands of proteins and quantitatively comparing changes of protein profiles in cells, tissues, whole organisms. In a gel more than 2,000 polypeptides spots are present routinely, but probably more than 20,000 protein species are present in the cell. The total number of protein spots can be higher than the number of genes: proteolysis, posttranslational modifications, and mRNA alternative splicing can increase the number of spots. Limitations of 2DE are an inability to separate all protein components and insufficient dynamic range of detection. One way proposed to resolve this problem is to enrich protein of interest via subcellular fractionation (see Chapters “Organelle Proteomics”, “2DE for Proteome Analysis of David Sheehan and Raymond Tyther (eds.), Methods in Molecular Biology, Two-Dimensional Electrophoresis Protocols, vol. 519 © Humana Press, a part of Springer Science + Business Media, LLC 2009 DOI: 10.1007/978-1-59745-281-6_3
31
32
Starita-Geribaldi
Human Metaphase Chromosomes”, and “Microsomal Proteomics”) or chromatographic or electrophoretic (see Chapters “Difficult Proteins” and “Pre-Fractionation Using Microscale Solution IEF”) fractionation of the sample before 2DE. As the first dimension of 2DE has seen considerable recent progress, another way is to separate proteins in “zoom” gels where the number of spots detected is improved by narrowing the pH range. Conventional isoelectric focusing (IEF) in carrier ampholytes (CA-IEF) originated with Svensson (1). The definition of the resolving power of IEF derived by Rilbe (2) is: ⎡ D (dpH / dx) ⎤ Δ(pI) = 3 ⎢ ⎥ ⎣ E (−du / dpH) ⎦
1/2
(1)
Δ(pI) = resolution capacity D = diffusion coefficient of the protein E = field strength (V/cm) dpH/dx = pH gradient du/dpH = mobility slope at pI The two variables are pH gradient width dpH/dx which is minimized and field strength which is maximized. A good resolution is favoured by high field strength and a weak pH gradient. This results in an extremely low Δ(pI), the minimum pI difference needed to resolve two neighbouring bands. A suitable resolution will be obtained for compounds with low diffusion coefficient (D can be limited by the gel) and a high mobility slope at their pI, conditions that are satisfied by all proteins. IEF utilizing carrier ampholytes (CA) for the generation of the pH gradient has been widely used for the separation of proteins and other amphoteric molecules. But the technique has inherent limitations and problems such as distorted protein zones. The so-called ‘cathodic drift’ (3) causes problems when the focusing time is long, e.g. when very narrow pH ranges are used. Disturbance by salt ions transported through the gel exists in IEF where CA are relatively free to move within a gel. When high concentrations of salts are present, conductivity gradually increases. The ions that migrate towards the electrodes produce plateaus and reduce the effective separation distance. A shift from the traditional technique to the immobilized pH gradient (IPG) method has progressively occurred (4). As the groups generating the pH gradient are buffering acrylamide derivatives (immobilines) covalently bound to the gel matrix, this does not cause pH gradient drift. Electroendosmosis is not a problem in IPGs. IPG are reproducible, are not modified by the sample composition, and allow higher resolution than previously possible. This is due mainly to the lower conductivity in the gel resulting from the immobiline
Selection of pH Ranges in 2DE
33
concentrations used compared to CA-based pH gradients. Then, high voltages can be applied as the covalently bound pH gradient is not affected by long focusing times. Proteins with pIs differing as little as 0.001 pH units can be completely resolved compared to 0.01–0.02 with CA-IEF (5). Smooth, stable, and also flat pH gradients are possible. Furthermore, narrow pH intervals can be prepared in long IPG strips which allow high spatial resolution and high protein loading without distortion of the band patterns. This increased reproducibility in the IEF dimension has allowed comparison of inter-laboratory data in 2DE maps (6; see also Chapter “Creating 2DE Databases for the World Wide Web”) and the possibility to carry out a preparative step (7), new tools such as databases were developed. In this chapter we will describe the different types of pH gradients. 2DE in a wide pH gradient is generally the starting point but depends on sample complexity. A modification of the pH slope can be selected to enhance resolution and protein loading in the 2DE pattern. Diverse strategies can be applied for this selection and are illustrated by some examples.
2. pH Gradients in 2DE 2.1. Linear pH Gradients
A series of buffering acrylamide derivatives with the general structure CH2⇒CH–CO–NH–R, where R is a carboxylic acid or a tertiary amino group defined by its pKa value, were used for copolymerization with acrylamide and bisacrylamide in order to produce IPG. In the IPG technique, the non-amphoteric buffering groups generating the pH gradient are covalently linked to the matrix used as an anti-convective support. When different pK values of commercially available immobilines (pK values of 3.6, 4.6, 6.2, 7.0, 8.5, and 9.3) are mixed in appropriate proportions in a gradient maker together with acrylamide, bisacrylamide, TEMED, and ammonium persulphate, a pH gradient is formed that is covalently attached to the polyacrylamide gel. Casting is identical to conventional polyacrylamide pore gradient gels. The buffer solutions are mixed in a gradient mixer allowing the pH gradient to co-vary with a density gradient. Linear mixing is the most widespread way to realize the pH gradient. In practice, an acid-dense solution where glycerol is added and a basic light one are prepared. Different recipes listing immobiline volumes for diverse pH gradients broad and narrow range reaching pH 10 or 10.5 were described by the manufacturer in an application note (8). The corresponding tables have been reported (9) and, if custom-made pH ranges are needed such as ultranarrow (less than
34
Starita-Geribaldi
one pH unit), the Immobiline volumes of the light and dense solution can be deduced by graphic interpolation. Commercial immobilized linear pH gradient wide range (3–10), 4 or 5 units pH range (7–11, 6–11), 3 units pH range (3–6, 4–7, 5–8, 6–9, 7–10), 2 units pH range (6.3–8.3), 1.2 or 1.3 unit pH range (3.9–5.1, 4.7–5.9, 5.3–6.5, 5.5–6.7, 6.2–7.5), and 1 unit pH range (3.5–4.5, 4–5, 4.5–5.5, 5–6) are available in various lengths: 7 cm, 11 cm, 13 cm, 17 or 18 cm, and more recently 24 cm. It must be noticed that few commercially available IPGs with basic pH ranges exist and, in this case, the pH gradients must be home-made. Since the 2DE technique has been revised in a lot of technical parameters among which the size of the gel (46 × 30 cm) to achieve high resolution (10), use of wide pH gradients is in progress. High reproducibility of large format 2-DE gels was achieved (11). For example, 24-cm-long IPGs 4.5–5.5 and 5.5–6.7 pH range were used to study radioresistance-related proteins in rectal cancer with 500 μg of samples separated and longer focusing time than in the classical 3–10 pH range (12). Separations in 24-cm long IPGs, pH 4–7, were used for differential gel exposure (Difexpo) of radiolabelled proteins in vivo, based on the co-electrophoresis on a 2DE gel of two protein samples, one labelled with 14C and the other with a 3H isotope (13). Finally the 3H/14C ratio for each spot was determined by the peak height value on two different imaging plates. A set of two measures from two different experiments on the same spot necessitates well-resolved 2DE maps. Running conditions with 24-cm-long IPGs have been described (14). 2.2. Non-linear pH Gradients
Non-linear (NL) pH gradients can be flattened for only a part of the pH range or give specific pH profiles. They are used with CAIEF and IPGs. The different ways to obtain them are described briefly (15). The gradient slope is altered in different segments in order to optimize the resolution of all components. pH gradient engineering has developed diverse types of NL pH gradients (16). Although logarithmic and polynomial gradients are of limited applicability, concave exponential gradients appeared suitable to give space to proteins spots in complex protein mixtures such as cell lysates and biological fluids and appeared quite useful in many 2DE applications. A series of gradients of 3 or 4 units or wide pH range were derived starting at pH 3, pH 4, or pH 5 as well as the most extended pH 2.5–11 which was optimal for highly heterogeneous samples. Their enhanced resolution was used early in proteomics investigations: IPG pH 3.5–10 NL resolved fairly well trains of spots such as α1-anti-trypsin or α1-anti-chymotrypsin in plasma protein 2DE map (17) and was also used to generate human liver 2DE maps for a two-dimensional gel database by microsequencing (18). Commercial IPG pH 3–10, 3–11, 7–11, 3–5.6 NL strips are available in diverse
Selection of pH Ranges in 2DE
35
lengths. Results can be compared to linear pH gradients of the same pH range or to a more narrow range: the 2-DE reference map of skeletal muscle using an IPG pH 3–10 NL strip in the first dimension revealed 652 spots compared to 697spots in a 4–7 pH range linear IPG (19). IPG 3–10 gave a broad overview, but the IPG 4–7 offered better resolution of the acidic region. 2.3. Basic pH Gradients
Commercially available basic pH range IPGs include 6–9, 7–10, 6–11, 7–11. Some recipes up to pH 10.5 are tabulated (9) and specific laboratory recipes have been reported (20, 21). Above pH 7.5 it is difficult to obtain good resolution, and basic IPGs run with standard protocols also deteriorate in quality with high sample load (22). Anodic cup application of the sample does give improved results, however. Specific focusing times have been described for particular pH ranges such as 34 kVh for IPG 6–9 (20, 21) or 6–11 (21) compared to IPG 6.2–8.2 and 7.5–9.5 focused until 80 kVh. Finally, chemicals involved in IEF can disimprove the pattern: dithiothreitol (DTT) and dithioerythritol (DTE) are weak acids with pK values in the region of pH 8–9 which are then transported out of the basic part of the IPG strip during focusing, resulting in loss of solubility for some proteins and horizontal streaking. Another problem is the appearance of extra spots and non-reproducible trains of spots probably due to variation in the number of oxidized protein thiols. Alkylation improved the 2DE map without a complete elimination of the problems. Poor resolution in the alkaline pH range can be enhanced by increasing the concentration of DTT in the rehydration buffer to 2.5% DTT compared to 1% in the original protocol, and the pattern can be further improved by addition of isopropanol and glycerol (21). The “Clean Gel” paper bridge method (22) can be used to introduce DTT continuously (23) by soaking “CleanGel” electrode strips in rehydration buffer with 3.5% DTT and placing them at the alkaline (cathodic) end of the strip. Oxidation of protein thiol groups with disulphides was proposed to eliminate streaking when narrow range basic gradients are used. This stabilization of cysteines was performed by using hydroxyethyldisulphide (HED) reagent (Destreak reagent from GE Healthcare) instead of the reductant DTT in the rehydration solution (24, 25). The combined use of anodic cup loading and the HED containing solution produced better resolution in both analytical and micropreparative cup loading (26).
2.4. Very Alkaline pH Gradients
pH gradients of ranges up to pH 10 can be made with six commercial immobilines (see Subheading 2.1). The range can be extended between pH 2 and 12 by including other immobilines such as pK 1.0, pK 10.3, and even pK > 13 (27–30). Suitable 2DE patterns were obtained particularly with TCA/acetone precipitation recommended for enrichment and better visualization
36
Starita-Geribaldi
of basic proteins >10. Very alkaline pH gradients were used for 2DE of ribosomal and nuclear proteins (29). By using optimized pH gradients in the ranges 9–12 and 8–12 calculated using the Altland IPGMAKER program (31) and 10–12 range (32–34), these proteins were focused in IPGs to the steady state. By using the most basic immobilines, the gel of the IPG strip is charged at the cathodic end. Reverse electroendosmotic flow takes place with water transport from cathode to anode. Disturbed patterns were corrected by gel composition replacing acrylamide by dimethylacrylamide, using additives such as isopropanol 10%, glycerol 10%, and methylcellulose 0.2% or 16% isopropanol, and adding 10% glycerol to the reswelling solution for IPGs (29). Finally, anodic sample application is mandatory and an increase of the final voltage up to 8,000 V gave optimum results (7, 35, 36). Wide pH gradients in the range 4–12 (27) or 3–12 (28) that give an overview of the total proteome (e.g. protein expression in mouse liver) have been successfully used. The reverse electroendosmotic flow is negligible, and 3–12, 4–12, and even 6–12 can be run in standard conditions. Furthermore, by increasing the separation distance from 18 to 24 cm, resolution is improved (28). Sample application by in-gel rehydration (37, 38) and IEF are performed automatically in one-step procedure in an integrated system (IPGphor).
3. Strategies 3.1 The Initial Experiment 3.1.1. The Theoretical Approach
3.1.2. The Experimental Approach
The statistical distribution of the pIs of water-soluble proteins along the pH axis has been computed and plotted on a histogram (39). The ideal curve was derived taking into account the relative abundance of proteins. Then, the non-linear pH 4–10 IPG interval became one of the standard recipes for 2DE (40). Other examples are the theoretical pI and Mr maps of yeast cell proteins derived from MIPS (http://www.mips.embnet;org/proj/ yeast/) (41) and the theoretical map of Bacillus subtilis displaying the two-thirds of the protein spots located in the neutral and acidic region (42). In this case, the MICADO database (http:// locus.jouy.inra.fr/cgi-bin/genmic/madbase_home.pI) was used, in which the pI region 4–7 should represent the bulk of cytosolic proteins. Furthermore, the number of membrane spanning domains is indicated in this map. It appears also that few proteins are out of the analytical window of 2DE. 2DE in a wide pH gradient is the starting point in nearly all proteomic studies. The choice of the pH gradient depends on sample
Selection of pH Ranges in 2DE
37
complexity. pH ranges 3–10, 3–12, 4–9, 4–7 have been used classically since the beginning of IEF and can be linear or not. 2DE in a wide pH gradient allows analysis of simple proteomes; this is the case for a small genome or when an organelle or affinityselected subfractionation has been prepared. In the case of more complex proteomes, this approach is used to get an overview of the total proteome. It is possible to appreciate the protein concentration at the analytical level, the distribution of the spots, and to determine areas of the gel that require better resolution. A differential analysis between proteomes in two physiological or pathological states in cells (43), tissues (44), or physiological fluids (45) can be performed. Peptide mass fingerprinting (PMF) of the most expressed proteins on semi-preparative gels in NL IPG pH 3–10 has been used in various recent proteomic investigations (46, 47). However narrow pH gradients will be required for identification of minor spots by MS analysis. Starting from the initial experiment, the ways by which one can select other pH gradients in order to get better resolution are: (a) determination of the pI by focusing sample on a CA gel plate, pH 3.5–9.5, at 10°C. A pH gradient measured with a surface pH electrode at the temperature of IEF will allow pI values to be determined with sufficient precision from the band position, but surface measurement is not practicable with IPGs as the conductivity in the strip is very low and the strip very narrow; (b) the use of carbamylated standard pI markers migrating with the sample (48); (c) as the endpoints are known, the pH of the endpoints for the narrow gradient can be deduced after measuring their distance from the edge of the gel with a ruler; nowadays, the development of informatic tools such as image analysis software calculates the pI/Mr of each spot suggesting quickly in which pH zone the gel could be better resolved. Then, three pH units, two pH units, and/or one pH unit can be used sequentially for separation of the sample. Before separation, the sample is dissolved in IEF lysis buffer without interfering substances (49). Experimental details in relation to sample preparation, sample loading, voltage ramps to be used in diverse pH gradients and in different apparatus have been reviewed (7, 50) and protocols detailed (51). Examples of IEF lysis buffers and voltages are described in the legend to Fig. 1. 3.2. Narrowing the pH Zone Progressively
This procedure allows us to conclude what is the best pH range to use, taking into account the background, the number of spots, sensitivity, and applicability to micropreparative purpose or detection of a protein of interest and its isoforms. Reduced background is obtained by flattening the pH gradient in the first dimension and the polyacrylamide gradient in the second dimension (52). With narrow pH gradients and very wide IPGs the overcrowded zones can spread fairly well in high spaced separations.
38
Starita-Geribaldi
Fig. 1. pH ranges used in seminal plasma from a normospermic man 2-DE. Sample (50 μg in IPG pH 3–10) or after desalting (100 μg in IPG pH 4–7, 750 μg in IPG pH 5–8, 500 μg in IPGs pH 4.5–5,5 and 5–6) was applied by in-gel rehydration and separated on Multiphor II (GE Healthcare) with a limitation of 3,500 V. IEF lysis buffer: 7 M urea, 2 M thiourea, 4% CHAPS, 65 mM DTT, 0.8% ampholytes of the corresponding pH range or 1.6% in semi-preparative experiments. (a): initial experiment using 18-cm-long IPG pH 3–10 (GE Healthcare) and gradient voltage 20,000 Vh (54); (b) 2DE using 18-cm-long IPG pH 4–7 (GE Healthcare) and gradient voltage 23,000 Vh; (c): 17-cm-long IPG pH 5–8 (BIO-RAD) and step voltage 150 V during 1 h, 300 V 1 h, 600 V 1 h, 3,500 V to reach 60,000 Vh; (d): 18-cm-long IPG pH 4.5–5 (GE Healthcare) with identical step voltage as in (C) and 60,000 Vh; (e): 18-cm-long IPG pH 5–6 (GE Healthcare) as in (d). SDS equilibration buffer (54–56) is used before second dimension in ExcelGels (GE Healthcare) followed by silver staining (see Chapter “Silver Staining of Proteins in 2DE Gels”). White arrows are spots of epididymal secretory protein E1.
To determine whether narrowing the pH range of the IPG strip would allow detection of additional protein spots, IPG strips of wide, medium, and narrow pH ranges can be compared. By loading equal amounts of proteins from rat heart tissue (100 μg) on the pH 3–10, 5–8, and 5.5–6.7 IPG strips the resulting silver stained 2DE were analysed (53). It appeared that the largest increment in the number of spots detected by the image analysis
Selection of pH Ranges in 2DE
39
software is gained by moving from the medium range to the narrow range strip, increasing the number of spots detected by 87% compared with the number of spots detected in that pH range on the pH 5–8 IPG strip. However progressive protein concentrations can be separated even at the analytical level thanks to the better loading capacity of the narrow pH range IPGs. This was achieved using cup loading anodic side application to Sacchromyces cerevisiae 2DE maps (41) or the in-gel rehydration method used by our group to separate human seminal plasma by 2DE (37, 38) (Fig. 1). In our initial experiment, 50 μg of seminal plasma proteins was allowed to separate in an 18-cm wide pH gradient, pH 3–10, revealing 734 ± 27 polypeptides visible in the corresponding 2DE of seminal plasma of a normospermic man (Fig. 1a). We were able to program a differential analysis between normospermic men and azoospermic patients and listed candidate protein infertility biomarkers in azoospermic patients (54). Better resolution of the seminal plasma 2DE is possible with an IPG strip pH 4–7 (Fig. 1b). This can be loaded with 100 μg protein. However, the protein of interest can be a guide to selecting the optimum pH zone: prostate specific antigen (PSA, Swiss Prot accession code P07288, Fig. 1a) cannot be studied in the 4–7 pH range as only one spot (experimental pI/Mr: 6.77/30.54, Fig. 1b) is placed at the boundary of this 3 units’ pH range IPG strip, the two other isoforms of PSA (experimental pI/Mr: 6.95/30.2 and 7.13/30.77) are outside this range. The train of three PSA spots is better resolved with an IPG pH 5–8 (Fig. 1c). Semi-preparative load (750 μg) is used to enhance detection of other spots of interest. Furthermore, concentration of spots in the acidic zone of the initial experiment with IPG 3–10 in the first dimension is so important that narrowing the pH zone in one unit pH gradient is possible. With 500 μg of proteins of seminal plasma loaded, 438 ± 25 spots could be obtained in a 4.5–5.5 pH range 2DE gel (Fig. 1d) compared to 338 ± 28 in the same fraction of the pH 4–7 IPG (Fig. 1b) and 280 ± 56 spots in the same fraction of the wide pH 3–10 IPG (Fig. 1a) and 637 ± 25 spots are obtained with the pH 5–6 IPG (Fig. 1e) compared to 302 ± 28 in the same fraction of the pH 4–7 IPG (Fig. 1b) and 295 ± 45 in the same pH range in the wide pH 3–10 IPG (Fig. 1a). In one pH gradient unit as in IPG pH 4.5–5.5 or 5–6, preparative work can separate several milligrams of seminal plasma proteins. Isolated spots, trains of spots, or even faint spots could be digested by trypsin and identified by MS and database searching (55, 56). Better resolution can be obtained by progressively narrowing the pH range (41, 55). Narrow pH gradients, also called “zoom” gels, can be used for more specialized work: by decreasing the pH slope, contaminants comigrating with spots of interest such as two of the isoforms of human epididymal secretory protein E1
40
Starita-Geribaldi
(pI/Mr 5.16/23.35 and pI/Mr 5.2/24.81, Swiss Prot accession code Q 15,668) could be separated, and detection of very faint spots such as amyloid p-component (Swiss Prot accession code: P02743) in the azoospermic patient seminal plasma was possible with a one pH unit range in the first dimension (56). A more accurate differential analysis between normospermic men and azoospermic men was then performed. Furthermore the train of clusterin (P10909, Swiss Prot accession code) close to the train of a major protein of the map was masked by vertical streaking, due to overloading of the molecules of the neighbouring proteins in 2DE performed with an IPG pH 3–10. Resolution obtained with an IPG pH 4.5–5.5 overcame this problem and furthermore suggested a specific role of some clusterin isoforms in the pathology of infertility (56). The importance of separating isoforms has also been demonstrated by others (57). 3.3. Dividing the pH Zone Systematically in Narrow pH Zones
Overlapping IPG separations and recombining a 2DE map can be applied even by combining 3 units of pH gradients: 2DE of circulating human monocytes allowed the reproducible detection and quantification of 1,500 spots in the 4–7 pH range and more than 2,000 spots in total by combining 2DE gels in the 4–7, 6–9, and 6–11 pH ranges (58). In order to display proteomes more completely, few studies attempted systematically to determine the maximum possible number of proteins that can be resolved using currently available overlapping narrow pH range IPGs. Overlapping narrow IPGs covering one pH unit with 18-cm separation distance have been proposed for the acidic range up to pH 7 (32). The protein pattern from 697 pre-B lymphoma cell separated by the use of a pH 3–10 IPG contains both acidic and basic proteins (20). A series of narrow pH unit IPG strips with overlapping boundaries were used and home-made gels were required for the basic zones. This approach is interesting when the aim of the study is a global screen of the proteome. The concept of increasing the resolution by dividing the pH 3–10 range into six narrow pH ranges works well in the acidic range of the proteome (20). However, recent improvements can be used above pH 7.5 (see Subheadings 2.3 and 2.4), although this requires extensive efforts to analyse many gels. Recently, visualization of the complex proteome of human heart left ventricle by a series of narrow range IPGs was achieved (59). A composite pattern covers all the proteome. Over a twofold increase in the number of spots has been calculated in human heart proteins with composite gels achieved with successive 3.5–4.5, 4–5, 4.5–5.5, 5–6, 5.5–6.7 narrow zones compared with the number of observed spots on the equivalent pH range of an IPG 3–10 NL 2DE gel (57). Recombining the 2DE map is particularly interesting when isoforms or trains of isoforms appear in two consecutive narrow pH gradients as spots of human epididymal secretory protein E1
Selection of pH Ranges in 2DE
41
present in seminal plasma and separated in the IPGs pH 4.5–5.5 and 5–6 (Fig. 1d, e) (56). 3.4. Limitations
When loading varying amounts of protein, the number of spots detected did not increase linearly as a function of the number of spots. With IPG strips, the limit of linear increase seems to be 200 μg for silver (see Chapter “Silver Staining of Proteins in 2DE Gels”) and 400 μg for SyproRuby in a pH 5–8 IPG strip (53). Overloading 2DE gels has a limited power, a phenomenon more pronounced for narrow IPGs. In systematic studies testing diverse concentrations, some spots merge in some conditions, while others remain at the limit of visualization or can fuse due to overloading (60). Furthermore, 2DE maps obtained with IPG pH 5–6 in the first dimension (Fig. 1e) begin to deteriorate at the ends with 500 μg of seminal plasma proteins, displaying vertical streaking. This confirms protein precipitation near the electrodes previously described for proteins with pI outside the pH range of the IPG strip (61). When the entire 2DE map is electronically reconstructed with narrow-range maps, the technique may give unreliable results because even very narrow IPG strips have to be loaded with the entire cell/tissue lysate or physiological fluid sample which contains proteins of diverse pIs. Proteins that focus in a selected narrow-range IPG interval will be strongly underrepresented as they will be only a small fraction of the entire sample loaded. Aggregation among unlike proteins will cause massive precipitation. Proteins display heterogeneity in size, charge, solubility, relative abundance, and multiple technologies can be required to analyse a wide range of proteins.
3.5. Enhancements
Prefractionation was proposed as a solution to obtain clearer patterns with background enhancement, suppression of vertical streaking, and a greater number of spots. Prefractionation methods can be applied in many ways. TCA/acetone precipitation may be selective (62), affinity purification (see Chapter “Solubilization of Proteins in 2DE: An Outline”) or chromatographic separation have been reported (63). Sequential extraction of cells or membranes has been proposed with strong solubilization solutions at the end of the procedure in order to extract the most difficult proteins (64–66) (see also Chapters “Difficult Proteins”, “Organelle Proteomics”, “Protein Extraction for 2DE”, and “Pre-Fractionation Using Microscale Solution IEF”). Another approach can be subcellular fractionation (67). Prefractionation methods according to pI have been reported such as free-flow IEF (68), IEF in a rotating multichamber device (69), a multifunctional electrokinetic membrane apparatus (70), a multicompartment electrolyser operating with isoelectric membranes (71) and its miniaturized form (72, 73). The advantage of IEF prefractionation is illustrated by selection of serum fractions in a given pI range which can then
42
Starita-Geribaldi
be applied to IPGs of similar pI range allowing 1,000–1,500 μg protein loadings in one unit pH range (74). Finally, a simple and fast sample prefractionation procedure has been proposed using flat-bed IEF in granulated Sephadex gels with conventional IEF instrumentation and prior separation in narrow pH range IPG (61).
4. Concluding Remarks Although competition is increasing from various other technologies, 2DE justifiably maintains a central role in proteomics. The present review has illustrated the role of the pH gradient in the powerful separation power of 2DE for analysis of complex mixtures. Wide pH gradients can give an overview of the total protein expression of cells while overlapping, narrow, and immobilized pH gradients yield greater numbers of spots. In order to increase the resolution and number of spots detected, long immobilized pH gradient strips with narrow pH ranges have been designed. However, we are confronted with the problem that the complete dynamic range of protein expressions in a complex sample cannot be visualized. In order to display many more proteins than already achieved, it seems that the development of prefractionation methods that meet the requirement for proteomics, associated with narrow pH gradients, can give new insights at the detection level. References 1. Svenson, H. (1961) Isoelectric fractionation, analysis and characterization of ampholytes in natural pH gradient. Acta Chem. Scand. 15, 325–341 2. Rilbe, H. (1973) Historical and theoretical aspects of isoelectric focusing. Ann. N. Y.. Acad. Sci. 209, 11–22 3. Righetti, P.G., and Drysdale, J.W. (1973) Smallscale fractionation of proteins and nucleic acids by isoelectric focusing in polyacrylamide gels. Ann. N. Y. Acad. Sci. 209, 163–186 4. Bjellqvist, B., Ek, K., Righetti, P.G., Gianazza, E., Görg, A., Westermeier, R., and Postel, W. (1982) Isoelectric focusing in immobilized pH gradients: principle, methodology and some applications. J. Biochem. Biophys. Methods 6, 317–339 5. Righetti, P.G., Gianazza, E., and Gelfi, C. (1988) Immobilized pH gradients. Trends Biochem. Sci., 13, 335–338
6 . Corbett , J. , Dunn , M.J. , Posch , A. , and Görg , A. (1994) Positional reproducibility of protein spots in two-dimensional polyacrylamide gel electrophoresis using immobilized pH gradient isoelectric focusing in the first dimension: an interlaboratory comparison. Electrophoresis, 15, 1205–1211 7. Görg, A. (2000) The current state of twodimensional electrophoresis with immobilized pH gradients. Electrophoresis, 21, 1037–1053 8. LKB Application note No 324, Bromma, Sweden. 9. Westermeier, R. (2000) IEF in immobilized pH gradient, in Electrophoresis in Practice, 3rd edn, (Westermeier, R., ed.), Wiley-VCH, Weinheim, pp. 223–238 10. Klose, J., and Kobalz, U. (1995) Two-dimensional electrophoresis of proteins: an updated protocol and implications for a functional analysis of the genome. Electrophoresis, 16, 1034–1059
Selection of pH Ranges in 2DE 11. Challapalli, K.K., Zabel, C., Schuchhardt, J., Kaindi, A.M., Klose, J., and Herzel, H. (2004) High reproducibility of two-dimensional electrophoresis. Electrophoresis, 25, 3040–3047 12 . Allal , A.S. , Kähne , T. , Reverdin , A.K. , Lippert , H., Schlegel, W., and Reymond, M.A. (2004) Radioresistance-related proteins in rectal cancer. Proteomics, 4, 2661–2669 13. Monribot-Espagne, C., and Boucherie, H. (2002) Differential exposure, a new methodology for the two-dimensional comparison of protein samples. Proteomics, 2, 229–240 14. Boucherie, H., and Monribot-Espagne, C. (2006) Two-dimensional gel electrophoresis of total yeast proteins in yeast protocols. Methods Mol. Biol., 313, 47–64 15. Gianazza, E., Giacon, P., Sahlin, B., and Righetti, P.G. (1985) Non-linear pH courses with immobilized pH gradients. Electrophoresis, 6, 53–56 16. Righetti, P.G., and Tonani, C. (1991) Immobilized pH gradients simulator- an additional step in pH gradient engineering: II. Nonlinear pH gradients. Electrophoresis, 12, 1021–1027 17. Hughes, G.J., Frutiger, S., Paquet, N., Ravier, F., Pasquali, C., Sanchez, J.C., et al. (1992) Plasma protein map: an update by microsequencing. Electrophoresis, 13, 707–714 18. Hochstrasser, D.F., Frutiger, S., Paquet, N., Bairoch, A., Ravier, F., Pasquali, C., et al. (1992) Human liver protein map: a reference database established by microsequencing and gel comparison. Electrophoresis, 13, 992–1001 19. Yan, J., Harry, R.A., Wait, R., Welson, S.Y., Emery, P.W., Preedy, V.R., et al. (2001) Separation and identification of rat skeletal muscle proteins using two-dimensional gel electrophoresis and mass spectrometry. Proteomics, 1, 424–434 20. Hoving, S., Voshol, H., and van Oostrum, J. (2000) Towards high performance twodimensional gel electrophoresis using ultrazoom gels. Electrophoresis, 21, 2617–2621 21. Hoving, S., Gerrits, B., Voshol, H., Muller, D., Roberts, R.C., and van Oostrum, J. (2002) Preparative two-dimensional gel electrophoresis at alkaline pH using narrow range immobilized pH gradients. Proteomics, 2, 127–134 22. Sabounchi-Schütt, F., Aström, J., Olsson, I., Eklund, A., Grunewald, J., and Bjellqvist, B. (2000) An immobiline dry-strip application method enabling high-capacity two-dimensional gel electrophoresis. Electrophoresis, 21, 3649–3656 23. Görg, A., Boguth, G., Obermaier, C., Posch, A., and Weiss, W. (1995) Twodimensional polyacrylamide gel electrophore-
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
43
sis with immobilized pH gradients in the first dimension (IPG-Dalt): The state of the art and the controversy of vertical versus horizontal systems. Electrophoresis, 16, 1079–1086 Olsson, I., Larsson, K. Palmgreen, R., and Bjellqvist, B. (2002) Organic disulfides as a means to generate streak-free two-dimensional maps with narrow range basic immobilized pH gradient strips as first dimension. Proteomics, 2, 1630–1632 Luche, S., Diemer, H., Tastet, C., Chevallet, M., Van Dorsselaer, A., Leize-Wagner, E., et al. (2004) About thiol derivatization and resolution of basic proteins in two-dimensional electrophoresis. Proteomics, 4, 551–561 Pennington, K., McGregor, E., Beasley, C.L., Everali, I., Cotter, D., and Dunn, M.J. (2004) Optimization of the first dimension for separation by two-dimensional gel electrophoresis of basic proteins from human brain tissue Proteomics, 4, 27–30 Görg, A., Boguth, G., Obermeier, C., and Weiss, W. (1998) Two-dimensional electrophoresis of proteins in an immobilized pH 4–12 gradient. Electrophoresis, 19, 1516–1519 Görg, A., Obermeier, C., Boguth, G., and Weiss, W. (1999) Recent developments in two-dimensional gel electrophoresis with immobilized pH gradients: wide pH gradients up to pH 12, longer separation distances and simplified procedures. Electrophoresis, 20, 712–717 Görg, A., Obermaier, C., Boguth, G., Csordas, A., Diaz, J.-J., and Madjar, J.-J. (1997) Very alkaline immobilized pH gradients for two-dimensional electrophoresis of ribosomal and nuclear proteins. Electrophoresis, 18, 328–337 Görg, A., and Weiss, W. (2000) Two-dimensional electrophoresis with immobilized pH gradients, in Proteome Research: Two-Dimensional Gel Electrophoresis and Identification Methods (Rabilloud, T., ed.), Springer Verlag, Berlin, pp. 57–92 Altland, K. (1990) IPG maker: A program for IBM-compatible personal computers to create and test recipes for immobilized pH gradients. Electrophoresis, 11, 140–147 Righetti, P.G. (1990) in Immobilized pH Gradients: Theory and Methodology, Biomedical Press, Elsevier, Amsterdam Bossi, A., Righetti, P.G., Vecchio, G., and Severinsen, S. (1994) Focusing of alkaline proteases (subtilisins) in pH 10–12 immobilized pH gradients. Electrophoresis, 15, 1535–1540 Bossi, A., Gelfi, C., Orsi, A., and Righetti, P.G. (1994) Isoelectric focusing of histones
44
35.
36.
37.
38 .
39.
40.
41.
42.
43.
44.
45.
Starita-Geribaldi in extremely alkaline immobilized pH gradients. J. Chromatogr. A, 686, 121–128 Wildgruber, R., Reil, G., Drews, O., Parlar, H., and Görg, A. (2002) Web-based two-dimensional database of Saccharomyces cerevisiae proteins using immobilized pH gradients from pH 6 to pH 12 and matrix-assisted laser desorption/ionization-time of flight mass spectrometry. Proteomics, 2, 727–732 Drews, O., Reil, G., Parlar, H., and Görg, A. (2004) Setting up standards and a reference map for the alkaline proteome of the Gram-positive bacterium Lactococcus lactis. Proteomics, 4, 1293–1304 Rabilloud, T., Valette, C., and Lawrence, J.J. (1994) Sample application by in-gel rehydration improves the resolution of two-dimensional electrophoresis with immobilized pH gradients in the first dimension. Electrophoresis, 15, 1552–1558 Sanchez , J.C. , Rouge , V. , Pisteur, M. , Ravier, F., Tonella, L., Moosmayer, M., et al. (1997) Improved and simplified in-gel sample application using reswelling of dry immobilized pH gradients. Electrophoresis, 18, 324–327 Gianazza, E., and Righetti, P.G. (1980) Size and charge distributions of macromolecules in living systems. J. Chromatogr., 193, 1–8 Gianazza, E., Giacon, P., Sahlin, B., and Righetti, P.G. (1985) Non-linear pH courses with immobilized pH gradients. Electrophoresis, 6, 53–56 Wildgruber, R., Harder, A., Obermaier, C., Boguth, G., Weiss, W., Fey, S.J., et al. (2000) Towards higher resolution: two-dimensional electrophoresis of Saccharomyces cerevisiae proteins using overlapping narrow immobilized pH gradients. Electrophoresis, 21, 2610–2616 Buttner, K., Bernhardt, J., Scharf, C., Schmid, R., Mäder, U., Eymann, C., et al. (2001) A comprehensive two-dimensional map of cytosolic proteins of Bacillus subtilis. Electrophoresis, 22, 2908–2935 Yocum, A.K., Busch, C.M., Felix, C.A., and Blair, Y.A. (2006) Proteomics-based strategy to identify biomarkers and pharmacological targets in leukemias with t(4;11) translocations. J. Proteome. Res., 5, 2743–2753 Bajo, M., Fruehauf, J., Kim, S.H., Fountoulakis, M., and Lubec, G. (2002) Proteomic evaluation of intermediary metabolism enzyme proteins in fetal Down’s syndrome cerebral cortex. Proteomics, 2, 1539–1546 Neumann, M., von Bredow, C., Ratjen, F., and Griese, M. (2002) Bronchoalveolar lavage
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
protein patterns in children with malignancies, immunosuppression, fever and pulmonary infiltrates. Proteomics, 2, 683–689 Guércio, R.A.P., Shevchenko, A., Shevchenko, A., Lopez-Lozano, Paba, J., Sousa, M.V., et al. (2006) Ontogenic variations in the venom proteome of the amazonian snake Bothrops atrox. Proteome Sci., 11, 4–11 Mayr, U., Mayr, M., Yin, X., Begum, S., Tarelli, E., Wait, R., et al. (2005) Proteomic dataset of mouse aortic smooth muscle cells. Proteomics, 5, 4546–4557 Anderson, N.L., and Hickman, B.J. (1979) Analytical techniques for cell fractions. XXIV. Isoelectric point standards for two-dimensional electrophoresis. Anal. Biochem., 93, 312–320 Rabilloud, T. (ed.) (2000) Proteome Research: Two-Dimensional Gel Electrophoresis and Identification Methods. Springer Verlag, Berlin. Görg, A., Weiss, W., and Dunn, M.J. (2004) Current two-dimensional electrophoresis technology for proteomics. Proteomics, 4, 3665–3685 Weiss, W., and Görg, A. (2006) Two-dimensional gel electrophoresis for plant proteomics. Methods Mol. Biol., 112, 235–244 Görg, A., Postel, W., Weser, J., Günther, S., Strahler, J.R., Hanash, S.M., et al. (1987) Horizontal two-dimensional electrophoresis with immobilized pH gradients in the first dimension in the presence of non-ionic detergent. Electrophoresis, 8, 45–51 Li, B.Z, Flint, P.W., and Boluyt, M.O. (2005) Evaluation of several two-dimensional gel electrophoresis techniques in cardiac proteomics. Electrophoresis, 26, 3572–3585 Starita-Geribaldi, M., Poggioli, S., Zucchini, M., Garin, J., Fenichel, P., and Pointis, G. (2001) Mapping of seminal plasma proteins by two-dimensional gel electrophoresis in men with normal and impaired spermatogenesis. Mol. Hum. Reprod., 7, 715–722 Starita-Geribaldi, M., Roux, F., Garin, J., Fenichel, P., and Pointis, G. (2002). ExcelGel precast gels for proteomic analysis of physiological fluids. Life Sci. News, 10, 7–9 Starita-Geribaldi, M., Roux, F., Garin, J., Chevallier, D., Fenichel, P., and Pointis, G. (2003) Development of narrow immobilized pH gradients covering one pH unit for human seminal plasma proteomic analysis. Proteomics, 3, 1611–1619 Westbrook, J.A., Yan, J.X., Wait, R., Welson, S.Y., and Dunn, M.J. (2001) Zooming-in on the proteome: Very narrow-range immobilised pH gradients reveal more protein species and isoforms. Electrophoresis, 22, 2665–2871
Selection of pH Ranges in 2DE 58. Gonzalez-Barderas, M., Gallego-Delgado, J., Mas, S., Duran, M.C., Làzaro, A., Hernandez-Merida, S., et al. (2004) Isolation of circulating monocytes with high purity of proteomic analysis. Proteomics, 4, 432–437 59. Westbrook, J.A., Wheeler, J.X., Wait, R., Welson, S.Y., and Dunn, M.J. (2006) The human heart proteome: two-dimensional maps using narrow-range immobilised pH gradients. Electrophoresis, 27, 1547–1555 60. Corthals, G.L., Wasinger, V.C., Hochstrasser, D.F., and Sanchez, J.C. (2000) The dynamic range of protein expression: a challenge for proteomic research. Electrophoresis, 21, 1104–1115 61. Görg, A., Boguth, G., Köpf, A., Reil, G., Parlar, H., and Weiss, W. (2002) Sample prefractionation with Sephadex isoelectric focusing prior to narrow pH range two-dimensional gels. Proteomics, 2, 1652–1657 62. Görg, A., Boguth, G., Obermeier, C., and Weiss, W. (1998) Two-dimensional electrophoresis of proteins in an immobilized pH 4–12 gradient. Electrophoresis, 19, 1516–1519 63. Fountoulakis, M., Tabacs, M.F., and Takacs, B.J. (1999) Enrichment of low copy-number gene products by hydrophobic interaction chromatography. J. Chromatogr. A, 833, 157–168 64. Weiss, W., Postel, W., and Görg, A. (1992) Application of sequential extraction procedures and glycoprotein blotting for the characterization of the 2-D polypeptide patterns of barley seed proteins. Electrophoresis, 13, 770–773 65. Weiss, W., Vogelmeier, C., and Görg, A. (1993) Electrophoretic characterization of wheat grain allergens from different cultivars involved in bakers’ asthma. Electrophoresis, 14, 805–816 66. Molloy, M.P., Herbert, B.R., Walsh, B.J., Tyler, M.I., Traini, M., Sanchez, J.C., et al. (1998) Extraction of membrane proteins by differential solubilization for separation using
67.
68.
69.
70.
71.
72.
73.
74.
45
two-dimensional gel electrophoresis. Electrophoresis, 19, 837–844 Pasquali, C., Fialka, I., and Huber, L.A. (1999) Subcellular fractionation, electromigration analysis and mapping of organelles. J. Chromatogr. B. Biomed. Sci. Appl., 722, 89–102 Burggraf, D., Weber, G., and Lottspeich, F. (1995) Free flow-isoelectric focusing of human cellular lysates as sample preparation for protein analysis. Electrophoresis, 16, 1010–1015 Hochstrasser, A.C., James, R.W., Pometta, D., and Hochstrasser, D. (1991) Preparative isoelectrofocusing and high resolution 2-dimensional gel electrophoresis for concentration and purification of proteins. Appl. Theor. Electrophor., 1, 333–337 Corthals, G.L., Molloy, M.P., Herbert, B.R., Williams, K., and Gooley, A.A. (1997) Prefractionation of protein samples prior to twodimensional electrophoresis. Electrophoresis, 18, 317–323 Herbert, B.R., and Righetti, P.G. (2000) A turning point in proteome analysis: sample prefractionation via multicompartment electrolyzers with isoelectric membranes. Electrophoresis, 21, 3639–3648 Righetti, P.G., Castagna, A., and Herbert, B.R. (2001) Prefractionation techniques in proteome analysis. Anal. Chem., 73, 320A–326A Zuo, X., Echan, L., Hembach, P., Tang, H.Y., Speicher, K.D., Santoli, D., et al. (2001) Towards global analysis of mammalian proteomes using sample prefractionation prior to narrow pH range two-dimensional gels and using one-dimensional gels for insoluble and large proteins. Electrophoresis, 22, 1603–1615 Zuo, X., and Speicher, D.W. (2002) Comprehensive analysis of complex proteomes using microscale solution isoelectrofocusing prior to narrow pH range two-dimensional electrophoresis. Proteomics, 2, 58–68
Chapter 4 Difficult Proteins Ben Herbert and Elizabeth Harry Summary The degree of protein diversity and dynamic range within organisms means that even the simplest proteome cannot be captured by any single extraction and separation step. New techniques have focused on major protein classes often under-represented in proteome analysis; low abundance, membrane, and alkaline proteins. The last decade has seen considerable technology development in fractionation tools aimed at complexity reduction in many forms. The key outcome of complexity reduction is that each fraction, or sub-proteome, can be studied in more detail, and proteins which would have remained undetected in a total extract are present in sufficient quantities. However, the tools available are fractionations, not amplifications, and like all mining for rare and difficult items, a large amount of starting material is often required. The key shortcomings of many proteome analysis techniques are now well documented. With this knowledge, the best modern proteomics ‘platform’ involves combining multiple protein extractions, gel and chromatographic separations, and multiple MS analysis methods. Key words: Low abundance, High abundance, Two-dimensional electrophoresis, Fractionation, Depletion, Affinity, Membrane proteins, Alkaline proteins, Review.
1. Introduction Difficult proteins are those which the biology suggests are present in the sample, but remain undetected in the analysis. The good news is it is probably not about the analysis method. The better news is there are probably sample preparation methods that will deliver the difficult proteins you seek. In most cases those proteins would have separated and been detected just fine, but they were not present in the analysis because they were excluded during sample preparation.
David Sheehan and Raymond Tyther (eds.), Methods in Molecular Biology, Two-Dimensional Electrophoresis Protocols, vol. 519 © Humana Press, a part of Springer Science + Business Media, LLC 2009 DOI: 10.1007/978-1-59745-281-6_4
47
48
Herbert and Harry
In the late 1990s and the early part of this century there were many discussions about the relative merits of the main proteomics methodologies, mainly comparing two-dimensional electrophoresis (2DE) gels to liquid chromatography–mass spectrometry (LC–MS). In most cases 2DE was considered to be a dinosaur: difficult to use and unable to separate important classes of proteins, namely alkaline, membrane, and low-abundance proteins. Important papers were published which painted an unfavourable picture of 2DE as the preferred tool for proteomics compared with LC–MS as the base of modern strategies for high-throughput protein identification (1–3). The early part of this century did not, however, see the death of 2DE, and it became clear that no single sample preparation, fractionation, or separation technology can provide a comprehensive view of any proteome. The current best practice in proteomics involves accessing at least two independent methods for sample preparation and protein separation. Ideally, the separated proteins are analysed by different MS techniques. This is highlighted by Breci et al. (4) who analysed yeast with a combination of LC–MS and gel methods. They clearly illustrate that different subsets of proteins are identified with each of the techniques used. The technology platforms available to proteomics researchers have also progressed in the last 10 years and, whilst skilled operators will always be important, relative novices can obtain highquality data from both MS and gel-based systems. However, to obtain the best results one must know how to treat a sample to extract the desired proteins and present them to the analysis systems. The degree of protein diversity and dynamic range within organisms means that even the simplest proteome cannot be captured by any single extraction and separation step. The last decade has seen considerable technology development in fractionation tools aimed at complexity reduction in many forms. The key outcome of complexity reduction is that each fraction can be studied in more detail, and proteins which would have remained undetected in a total extract are present in sufficient quantities. However, the tools available are fractionations, not amplifications, and like all mining for rare and difficult items, a large amount of starting material is often required. In this chapter we discuss low-abundance, membrane, and alkaline proteins and look at some sample preparation techniques which enable their analysis. In each case we consider fractionation methods which are applicable to both gel-based and LC-based separations.
Difficult Proteins
49
2. Low-Abundance Proteins Most proteins are of low abundance. For example, 50% of the protein content of yeast is the product of 100 genes (5), and this type of distribution is observed in most eukaryotic cells. This means that the remaining protein is distributed over thousands of gene products (5). Ghaemmaghami et al. (6) determined the expression levels of yeast proteins through immunodetection experiments. The study used genome-wide tagging of open reading frames to create fusion proteins with a common high affinity tag. Each protein was expressed from its natural chromosome location, and western blot detection of the common tag was used to quantify expression levels. The group was able to analyse protein expression levels for 4,251 proteins (83% of named ORFs), which were converted into measurements of protein molecules per cell. The abundance of proteins expressed from the yeast genome can range from less than 50 to more than a million molecules per cell. Importantly, 75% of the proteome was present at less than 5,000 proteins per cell (6). The low-abundance proteins in cells are considered to be some of the most important, including regulatory proteins, signal transduction proteins, and receptors. Some organisms are sufficiently well understood to enable the prediction of a protein’s cellular abundance on the basis of the codon usage bias of the respective genes (7). Proteins arising from genes with codon bias index (CBI) or codon adaptation index (CAI) values of less than 0.2 are considered low abundance in yeast, the model organism used for recent high-throughput protein identification studies (1). Low-abundance proteins are almost never seen in traditional 2DE maps because either overwhelming quantities of abundant soluble proteins obscure their detection or they are not completely solubilized. Most 2DE gel-based proteomic studies employ a ‘one extract-one gel’, approach and the majority of proteins identified in these studies are in high abundance because that is what is seen on a single gel (confirmed by Gygi et al.) (1). The advent of immobilized pH gradients (IPGs; see also Chapters “Two-Dimensional Electrophoresis (2DE): An Overview”, “Solubilization of Proteins in 2DE: An Outline”, “High-Resolution 2DE”) has greatly improved the reproducibility of 2DE gels and made it easier for new users to implement high-quality 2DE technology. Many groups now understand that IPG technology can be used to create narrow (2–3 pH units) and very narrow (approx. 1 pH unit) gradients (see Chapter “Selection of pH Ranges in 2DE”) that will enable many more proteins to be resolved – and many of the most useful narrow gradients are commercially available. In addition, the load capacity of narrow-range
50
Herbert and Harry
IPGs is considerably higher than broad-range IPGs, thus enabling the visualization and identification of previously unseen proteins. However, detection of low-abundance proteins in these fractions also requires removal of abundant proteins from the sample. In the following paragraphs we will outline the technical difficulties of working with unfractionated samples and discuss some fractionation methodologies which can be used for mining below the levels of abundant proteins. A total protein extract from most tissues or organisms usually comprises proteins with isoelectric points (pI) of between pH 3 and pH 12. When this total extract is loaded onto a pH gradient covering only 1 or 2 pH units there are many proteins that do not focus within the IPG. These extraneous proteins cause two main problems. First, although it is possible to load many milligrams of total protein onto the narrow-range IPG, the majority of the proteins will have pIs outside the pH range of the IPG. Even in the highly crowded pH 5–6 region, only 35% of the predicted yeast proteome is present, so a whole extract loaded on a pH 5–6 IPG will focus poorly at loads above a few hundred micrograms. The second problem is the severe disturbance to isoelectric focusing (IEF) caused by the proteins which do not focus within the separation range of the IPG. These proteins migrate to the ends of the IPG strip and precipitate in very concentrated zones, which are conductive because the proteins remain charged (8). This phenomenon can be minimized by loading a small amount of total protein onto the IPG strip; however, this is not useful for automated identification of low-abundance proteins unless a highly specialized (and manual) detection and MS strategy is used (9). To eliminate these two problems and resolve high loads of proteins on narrow- and very-narrow-range IPGs, it is essential to pre-fractionate the protein extract into discrete isoelectric fractions that correspond to the pH ranges of the IPGs to be used for 2DE gel (8, 10, 11) (see Chapter “Pre-Fractionation Using Microscale Solution IEF”). For gel-based separations, an ideal method of preparative isoelectric pre-fractionation is separation in a multi-compartment electrolyser (MCE; Fig. 1). This technology uses the same chemistry as IPGs to define a segmented pH gradient. It consists of purifying to homogeneity proteins in a liquid vein, by capturing them in an isoelectric trap formed by two Immobiline membranes having pIs encompassing the pI of the desired fraction (8). The protein sample for fractionation is prepared, as for IEF in IPGs, and loaded into one chamber of an MCE which is usually configured with between three and six sample chambers. Following preparative IEF each fraction yields protein samples fully compatible with the IPG step, namely devoid of salts and other typical components of biological fluids, such as fatty acids, amines etc. (8). Clearly, sample fractionation is required to
Difficult Proteins
51
Fig. 1. Schematic diagram of an MCE. This is a commercially available small volume (2.5–5 mL/chamber) instrument with no sample recirculation; instead each chamber is stirred using magnetic stirrer bars driven by rotating magnets embedded in the peltier cooling plate. The chambers are sealed using pH-modified membranes which are matched to the endpoints of commonly used narrow-range IPGs. This creates a stepwise pH gradient and complex mixtures are fractionated into pH segments. Not recirculating the chamber contents speeds up the fractionation by continuously exposing the whole sample to the electric field.
reduce the complexity of cellular extracts and enrich for particular classes of proteins. One of the simplest fractionation methods is sequential extraction which takes advantage of the highly soluble nature of many abundant proteins. An initial extract with an aqueous buffer leaves an insoluble pellet to be extracted with stronger reagents (2, 12). The advantage of this method is that all extraction steps can be performed in a single tube, thus minimizing losses. There has been considerable discussion of the technical issues associated with the detection of low-abundance proteins in a number of recent publications (1, 2, 5, 9, 13–15). A major issue concerns the dynamic range of protein concentration that one can expect to encounter in proteomics. For the sake of clarity, it is essential to differentiate between cellular dynamic range and protein abundance in extra-cellular fluids such as plasma. For yeast, the most abundant proteins are present at around 2,000,000 copies per cell which represents 4% of the total protein, whereas the least abundant proteins are present at around 100 copies per cell, a dynamic range of only four orders of magnitude (5). However, in extra-cellular fluids the situation is considerably more difficult, and Corthals et al. (13) have predicted that the dynamic range of proteins in plasma could cover up to 12 orders of magnitude,
52
Herbert and Harry
although this is a rather skewed distribution because of the presence of albumin which represents over 50% of the total protein, by weight. Similarly, it is important to remember that any tissue or even whole organism will not express the whole genome at any one time. In genome-wide expression profiling of Escherichia coli (16) and Saccharomyces cerevisiae (17), transcripts for only 75% of these genomes have been detected by combining data from all phases of the cell cycle under normal culture conditions. In yeast grown to log phase, transcripts for 52% of the genome have been detected and in E. coli grown in rich media at 37°C, around 25% of the genes are expressed at detectable levels (16, 17). However, in a more recent study on yeast, Ghaemmaghami et al. (6) found that 80% of the predicted proteome was expressed under normal growth conditions. Partly, the discrepancy in the predicted proteome is due to differences in the number of ORFs which are considered, i.e. whether all ORFs or only named ORFs are included. Thus, it is clear that, for any proteome project, predictions of expected protein numbers should be considerably reduced from those obtained using the whole genome and the latest ORF predictions should be considered. 2.1. ElectrophoresisBased Fractionation Methods
Preparative electrophoresis, especially IEF, methodologies have recently experienced a revival. This is due to the high resolving power of IEF and the use of pI as a powerful tool in refining shotgun LC–MS data (18). Some of the major techniques are briefly reviewed, but it should be kept in mind that the preferred tools will be those that exploit IEF techniques, since the resulting fractions can be directly interfaced with 2DE.
2.1.1. Continuous Electrophoresis in Free Liquid Films
Compared to gel-based separations, this technique has two main advantages. Much higher sample loads can be applied, and certain artefactual protein modifications induced by free monomers in polyacrylamide gels are eliminated. Present equipment derives from the concepts and instrumentation of Hannig (19), in which an electrolyte solution flows in a direction perpendicular to an electric field and the mixture undergoing separation is added continuously at a small entry point in the flowing medium. Components of the mixture are deflected in diagonal trajectories according to their electrophoretic mobility and can be collected at the bottom of the device into a maximum of 96 fractions. Freeflow electrophoresis (FFE) was born as a technique for purifying cells and sub-cellular organelles, which could be recovered with high purity due to their very low diffusion coefficients. Whilst of use for purification of organelles, FFE is not ideal for the pre-fractionation of proteins. This is due to proteins’ higher diffusion coefficients, as compared with cells and organelles. For protein separation, FFE provides improved separation in the IEF
Difficult Proteins
53
mode (FF-IEF), due to built-in forces impeding entropic peak dissipation. FF-IEF can also be used as the first dimension of a 2DE map, the eluted fractions being directly analysed by orthogonal SDS–PAGE. In use, one advantage of FF-IEF was immediately evident: large proteins such as vinculin (117 kDa) could be well recovered and easily identified. In contrast, recovery of high mass proteins has always been problematic in IPG gels (20) because they are more difficult to resolubilize after IEF. 2.1.2. Rotationally Stabilized Focusing Apparatus: The Rotofor
The rotofor is a device that separates a liquid protein sample into multiple fractions by IEF. The device is assembled using an acrylic tube, separated into 20 sample chambers using liquid-permeable nylon screens. Cation- and anion-exchange membranes are placed against the anodic and cathodic chambers, respectively, so as to prevent diffusion of electrode-associated by-products into the separation chambers. The narrow-pI range fractions can then be used to generate conventional 2DE maps. In recent times the Rotofor has been used as the first dimension of a combined electrophoresis/chromatography two-dimensional fractionation methodology in which each isoelectric fraction was further analysed by hydrophobic interaction chromatography, using nonporous reversed-phase HPLC (21). Each protein peak collected from the HPLC column was digested to peptides with trypsin, subjected to MALDI-TOF MS analysis, and identified by database searching.
2.1.3. Sample Pre-fractionation Via Multi-compartment Electrolysers with Isoelectric Membranes
Multi-compartment electrolysers (MCE) were first introduced as a class of instruments based on conventional IEF in the presence of the soluble, amphoteric, carrier ampholyte buffers. However, MCEs based on immobiline membranes represent a quantum leap over previous techniques (22, 23). This relies on isoelectric membranes that are fabricated with the same acrylic monomers used in IPG gels. The advantages of such a method are immediately apparent. Firstly, such a device produces fractions of the proteome that are fully compatible with first-dimension separation in 2DE maps, a focusing step also based on IPG technology. Secondly, it permits a sample to be fractionated into proteins of precise pI values, such that they fall within the pH gradient of any narrow- or wide-range IPG strip. The chances of protein precipitation occurring will thus be much reduced. In fact, when an entire cell lysate is analysed in a wide gradient, there are few risks of protein precipitation. In contrast, when the same mixture is analysed in a narrow gradient, massive precipitation of all non-isoelectric proteins can occur. Furthermore, due to the fact that only proteins co-focusing in the same IPG interval will be present, much higher sample loads can be used, permitting the detection of low-abundance proteins (Fig. 2).
54
Herbert and Harry
Fig. 2. (a) Unfractionated rat brain extract separated on an 11-cm pH 3–10 IPG. (b) Three MCE fractions of rat brain extract separated on 11-cm pH 3–10 IPGs to illustrate the isoelectric fractionation. The MCE fractions are, from left to right; pH 3–5, 5–6 and 6–11.
The MCE technique continues to undergo improvement. Whilst initial models of the MCE were large, a miniaturized version of the MCE has been reported (8). A remedy to the slow migration of proteins in MCEs because of the sieving effect of isoelectric membranes has also been proposed (24) by Fortis et al., via the introduction of isoelectric beads (25). These beads were made using ionic acrylamide derivative monomers co-polymerized within the pores of a central ceramic hard core, minimizing mass transfer resistance of proteins that are transiently adsorbed onto the beads. As a result, significantly reduced separation time was shown along with a very low electroendosmotic flow. A recent study of yeast membrane and low-abundance proteins illustrates how combining fractionation steps and including MCE enable many low-abundance proteins to be detected. Pedersen et al. (26) employed a membrane preparation method consisting of direct cell lysis in 100 mM sodium carbonate to dissociate many of the peripheral proteins from the membrane which resulted in a high yield of integral membrane proteins (27). After membrane recovery by ultracentrifugation, the supernatant contains most of the abundant, soluble proteins and the pellet is enriched for cell and organellar membrane and lowabundance proteins. From this membrane-enriched fraction, which was MCE fractionated and displayed across three different pH gradients, MALDI-TOF MS was used to identify 780 protein isoforms, representing 323 gene products, including 28% lowabundance proteins [with codon adaptation index (CAI) values <0.2] and 49% of these were membrane or membrane-associated proteins. Figure 3 illustrates the study data compared to the CAI profile of the whole yeast genome. 2.1.4. Miniaturized Isoelectric Separation Devices
A simple variant of preparative IEF called ‘off-gel IEF’ has been described. Just like the multi-compartment separation technique, the system has been devised for the separation of proteins according to their pI and for their direct recovery in solution without adding buffers or ampholytes. The principle is to place a sample
Difficult Proteins
55
Fig. 3. (a) The codon adaptation index (CAI) for the whole yeast genome, divided in columns of 0.1. The X-axis indicates the number of genes in each CAI slice. The left bar represents the genes with CAI between 0.0 and 0.1, which will produce the lowest-abundance proteins. 80% of all yeast genes have CAI values less than 0.2 which indicates they will produce low-abundance proteins. (b) The combined data for 780 protein IDs from Pedersen et al. (24, 25) showing that, when membrane preparation and IEF are combined, it is possible to identify many low-abundance proteins.
in a liquid chamber, positioned to be touching an IPG gel. After separation, only the globally neutral species with pI equal to the pH of the IPG gel remain in solution. In a further extension of this initial work, the system was improved and adapted to a multi-well device, composed of a series of compartments of small volume (100–300 μL) and compatible with current instruments for separation (28). As discussed earlier, a major new use of this type of electrophoretic fractionation involves the separation of protein mixtures or peptide digests as part of an LC–MS strategy. Compared with cation-exchange chromatography, IPG IEF provides higher resolution separation and experimentally derived pI information, which can be used as a filter criterion for tandem mass spectral data validation (18). Importantly, the proteins or peptides are available in liquid fractions, thus eliminating the need for gel-based enzyme digests and peptide extractions. 2.2. Affinity Sample Pre-fractionation Methods 2.2.1. High-Abundance Protein Depletion
For the analysis of serum, plasma, and cerebrospinal fluid a common approach is to remove high-abundance species prior to analysis (29). It is thus possible to load more of the depleted sample and therefore to observe a significantly higher number of species, including many that would have escaped detection in an untreated sample. Several methods are described for removal of high-abundance proteins; all of them derive from very classical approaches in the domain of affinity chromatography. A variety of commercial products are available to deplete albumin and up to 19 other high-abundance proteins using specific immunosorbents – mostly antibodies on chromatographic bead supports. Despite the widespread adoption of depletion strategies, some studies have reported that the removal of high-abundance species
56
Herbert and Harry
causes a dramatic loss of low-abundance proteins due to nonspecific binding. Shen et al. (30) observed that, during human serum albumin (HSA) depletion, another 815 species (not including HSA) were co-depleted as well. When capturing IgGs, another 2,091 species (not including IgG) were also co-depleted, among which 56% were antibody sequences, while the other 44% included low-abundance cytokines and related proteins. Paradoxically, in the depleted sera, only 1,391 proteins could be detected. Of this minority population, 269 had been co-depleted with the albumin fraction and another 568 were in common with the IgG group. When considering that there was a total of 4,590 unique gene products (30), it is ironic that most of them were discovered in the albumin and IgG fractions rather than in the depleted fraction! The issue of co-depletion in affinity depletion prefractionation procedures is now becoming common knowledge. Colantonio et al. (31) discuss the problem of reaching a balance between total depletion of IgGs, with concomitant loss of other proteins, versus the partial removal of IgGs, for minimizing loss of other species. 2.2.2. Dynamic Range Equalization Via Hexapeptide Libraries
The use of combinatorial peptide libraries provides an alternative, non-antibody, strategy for embracing all the protein species in a given proteome. This approach now seems to be a reality, and it is embodied in the concept of protein equalizer technology, commercially available as ProteoMiner™, a combinatorial hexapeptide library bound to chromatographic beads. The original article, outlining the synthesis of the beads and some of their fundamental properties, has recently been published together with some reviews describing some of the very basic concepts (32–34). The ProteoMiner™ approach consists of a solid-phase combinatorial library of hexapeptides, that is synthesized via a short spacer on poly(hydroxymethacrylate) beads. The ligands are represented throughout the beads’ porous structure and can reach a concentration of 50 pmoles per mL of beads of the same hexapeptide distributed throughout the core of the pearl. This amounts to a ligand density of ca. 40–60 μmoles per mL of bead volume (average bead diameter of about 70 μm). Each single bead, thus, has millions of copies of a single, unique ligand and each bead, potentially, has a different ligand from every other bead. Considering that, for the synthesis, the 20 natural amino acids are used, this means that the library contains a population of linear hexapeptides amounting to 206, i.e. 64 million different ligands. Such a vastly heterogeneous population of hexapeptides means that, in principle, an appropriate volume of beads should contain a partner able to interact with just about any protein present in a complex proteome, in a biological fluid or a tissue or cell lysate of any origin.
Difficult Proteins
57
Fig. 4. Fluorescently stained 2DE images of human plasma separated on 11-cm pH 4–7 IPGs and Bio-Rad Criterion 4–12% second-dimension gels. The control gel (left) was loaded with 220 μg of undepleted plasma. The ProteoMiner gel (right) was loaded with 220 μg of plasma proteins eluted from the hexapeptides. This load represents approximately 10% of the eluted protein from 1 mL of starting plasma.
Up to 2004, the only extensive data set available on serum proteins was that of Anderson et al. (35) who published a compilation of 1,175 non-redundant species collated from several sources. Although this was an impressive total, it was quickly superseded by the massive effort of the HUPO Plasma Protein Project (PPP). The PPP was started in 2002 as a network of 35 collaborating laboratories and multiple analytical groups. Via these combined efforts, a core set of 3,020 serum plasma proteins was generated and is now available on public databases (www. bioinformatics.med.umich.edu/hupo/ppp). There have been an additional 6,484 unique proteins identified via only a single peptide (thus with a rather low confidence level, ca. 60–75%) bringing the total to an extraordinary level of 9,504. Sennels et al. (36) have reported results with the human serum proteome, as captured with a single, simple experimental protocol exploiting a diffusible bag of ProteoMiner™ beads. In this experiment 300 mL of serum was processed and subjected to adsorption with the ligand library. Upon elution with three different eluants and analysis via FT-ICR MS, a total of 3,661 unique gene products could be recognized, with a confidence level of 95% (Fig. 4).
3. Membrane Proteins Very few membrane proteins are seen on 2DE gels when conventional sample preparation methods are used. Under such conditions hydrophobic membrane proteins aggregate when they concentrate at their pI and are not readily solubilized by SDS for
58
Herbert and Harry
entry into the second dimension. Rabilloud’s group (CEA, Grenoble, France; see also Chapter “Solubilization of Proteins in 2DE: An Outline”) and others have shown that strong solubilizing agents greatly reduce this problem (27, 37). However, improved solubility conditions alone are not sufficient significantly to increase the recovery of membrane proteins on 2DE gels. Fractionation, in combination with the correct solubilizing reagents, produces sample extracts highly enriched for membrane proteins. Sequential extraction of proteins from a sample by increasing protein solubilizing conditions at each step is an effective strategy for first removing the more abundant soluble proteins and concentrating the less abundant and less soluble membrane proteins. Molloy et al. (12) used sequential extraction and 2DE gels with MALDI-TOF MS to detect 11 integral outer membrane proteins from E. coli. Although these proteins contained up to seven transmembrane domains they were not hydrophobic as determined by their grand average of hydropathy (GRAVY) scores and were readily solubilized after the more abundant soluble proteins had been removed. Another type of sequential extraction where the membrane was stripped of peripheral proteins by incubation in sodium carbonate at pH 11 was used in a study of E. coli, and here 80% of the integral outer membrane proteins were detected on a 2DE gel (27). In their large 2DE gel-based study of yeast membrane proteins, Pedersen et al. used preparative isoelectric focusing in an MCE to obtain acidic, neutral, and alkaline pH fractions of sodium-carbonate-stripped membrane proteins (24). This strategy enabled high protein loads on narrow pH gradients. Analysis of the pH 7.5–10.5 fraction resulted in identification of 237 proteins, representing 93 genes, including proteins from 30 (32%) genes with CAI < 0.2, integral membrane proteins from 20 (22%) genes, and membrane-associated proteins from 10 (11%) genes. All the proteins identified in the pH 7–10.5 fraction were also predicted to have alkaline pI values. In total, Pedersen’s study identified 800 proteins, of which 323 were unique proteins. From the unique proteins, 105 were integral membrane proteins (33%), 54 were membrane-associated proteins, and 90 were low-abundance proteins (28%) with CBI below 0.2. Of the 105 integral membrane proteins, the majority had fewer than four transmembrane domains and no proteins with more than six transmembrane domains were detected. To summarize, the last decade of 2DE-based membrane proteomics – the methods and reagents for analysing membrane proteins on 2DE gels – has developed to the point where large studies are possible. However, these methods require large amounts of starting material and multiple fractionation steps. At this stage, it is not common to detect proteins with more than six transmembrane domains on 2DE gels.
Difficult Proteins
59
Many studies incorporating membrane proteomics conducted in the last few years have adopted a simpler one-dimensional SDS–PAGE (1DE) approach to membrane protein analysis. In this strategy the membrane preparation is solubilized by SDS and separated by 1DE. Entire separation lanes are excised into many small bands, without the need for complete staining. Bands are processed for LC–MS following standard methodology (38). In another powerful illustration of combining multiple extraction, gel and chromatographic separation, and multiple MS analysis methods, Wolff et al. have identified almost 50% of the predicted proteome of Bacillus subtilis (39). They combined 2DE gels and MALDI MS with two-dimensional LC–MS using iTRAQ to analyse the soluble proteins from heat shock experiments. The membrane fractions were analysed by 1DE followed by LC–MS of the excised bands. Using this method they were able to identify 453 proteins in the membrane fraction, of which 232 contained transmembrane domains. This indicates that the sodium carbonate membrane stripping method is not successful in removing all non-transmembrane proteins, a result similar to that found by Pedersen et al. (24). Only 140 out of a total of 1,218 proteins were identified by all three methods used, which is expected because the two-dimensional and LC–MS methods were used to analyse soluble proteins. In a positive outcome for 2DE, they found a good correlation between iTRAQ and 2DE gel quantitation with an R2 of 0.817.
4. Alkaline Proteins Alkaline proteins have been particularly difficult to resolve on 2DE gels for two reasons. Firstly, in sample preparation for 2DE the standard procedure adopted up to the present calls for reduction prior to the IEF/IPG step, followed by a second reduction and alkylation step in the equilibration solution between the first and second dimension, in preparation for the SDS–PAGE step. This protocol is far from being optimal, due to incomplete reduction during IEF and often results in a large number of spurious multimeric spots, due to ‘scrambled’ disulphide bridges among like and unlike chains. Due to the negative charge on the –SH group of typical reducing agents such as DTT, this compound would act as a buffer and will keep migrating inside the pH gradient (towards the anode) and be arrested by protonation, around pH 7. Thus, artefacts arising from incomplete reduction are more often observed in the alkaline portion of the IPG. Even tributyl phosphine, a strong non-thiol reducing agent, does not appear to have the reducing power to maintain all proteins as monomeric
60
Herbert and Harry
polypeptides during IEF. A recent series of papers showed that the number of such artefactual spots can be impressively large in alkaline IPGs, even in the case of simple polypeptides such as the human α- and β-globin chains, which possess only one (α-) or two (β-) –SH groups (40–42). In addition, failure to alkylate proteins prior to IEF can result in a substantial loss of spots on 2DE, probably due to the fact that proteins, at their pI, regenerate disulphide bridges with concomitant formation of macroaggregates which become entangled with and trapped within the polyacrylamide gel fibres. This strongly quenches their transfer in the subsequent SDS–PAGE step. The importance of cysteine alkylation in obtaining high-quality separations in alkaline IPGs has been confirmed by Luche et al. (43). They adopted two strategies for cysteine blocking: classical alkylation with maleimide derivatives and mixed disulphide exchange with an excess of a low molecular weight disulphide. Good resolution of basic proteins was obtained with in-gel rehydration on wide gradients (e.g. 3–10 and 4–12), but anodic cup loading produced the best resolution for narrow-range basic gradients (e.g. 6–12 or 8–12). Our group has further simplified the methodology of reduction and alkylation by using acrylamide monomer as an alkylating agent instead of iodoacetamide (41–43). In fact, at the alkaline pH values at which alkylation is customarily performed, iodoacetamide and acrylamide have similar reactivity rates on ionized –SH groups. Acrylamide does not react with TBP, so the reaction can be carried out in a single step, which results in a significant saving in time. Furthermore, acrylamide does not seem to react with thiourea or amino acid groups other than cysteine. A second major issue which prevents high resolution on alkaline IPGs is the isoelectric distribution of the extract. The majority of cellular extracts are biased towards acidic proteins, and therefore whole-cell extracts do not resolve well on alkaline pH gradients, especially at the high protein loads required for protein characterization. Whilst low protein loads often enable acceptable resolution to be obtained with total extracts on narrow pH-range alkaline gels, many proteins are then not present in sufficient quantity for routine MS analysis. As discussed in Subheading 2, the majority of species in every proteome are present at low abundance, so using low protein loads to obtain high-quality separations would seem counterproductive. One way to solve this is to remove the acidic protein fraction and load higher amounts of the remaining alkaline protein fraction onto 2DE gels. Preparative isoelectric pre-fractionation enables the isolation of a sample enriched for alkaline proteins and high protein loads on alkaline pH gradients (Fig. 5) (8).
Difficult Proteins
61
Fig. 5. Rat brain alkaline MCE fraction from Fig. 2 separated on an 11-cm pH 6–11 IPG. The gel was stained with Sypro Ruby.
5. Concluding Remarks Publication of the human genome (44, 45) has focused attention on complexity and the issue of proteomes, their diversity, and their relationship to genomes. Proteomics technology has matured to the level where the identification of hundreds of proteins in a single experiment is routine and thousands of proteins in a single experiment will be routine within the next decade. The next generation of proteomics will be an integral part of systems biology, studying modifications at the transcriptional, translational, and post-translational levels to define proteome complexity. The number of sequenced genomes has made protein identification a relatively simple task and the focus is now on characterization of protein isoforms. To this end, there are a number of vital methodologies, such as IEF and, to a lesser extent, 2DE, that cannot be omitted without severely limiting the utility of the data. Fractionation at the sub-cellular level or with sequential extraction, and in combination with isoelectric fractionation, are powerful tools for mining below the most abundant 10% of the proteome. The separation of co- and post-translationally modified forms of proteins, which reflect the true functional state of the proteome, is essential, and IEF and 2DE remain key parts of the technology platform.
62
Herbert and Harry
References 1. Gygi, S.P., Corthals, G.L., Zhang, Y., Rochon, Y., and Aebersold, R. (2000). Evaluation of twodimensional electrophoresis-based proteome analysis. Proc. Natl. Acad. Sci. U.S.A. 97, 9390–9395 2. Washburn, M.P., Wolters, D., and Yates, J.R. (2001) Large-scale analysis of the yeast proteome by multidimensional protein identification technology. Nat. Biotechnol. 19, 242–247 3. Patterson, S.D. (2000) Proteomics: the industrialization of protein chemistry. Curr. Opin. Biotechnol. 11, 413–418 4. Breci, L., Hattrup, E., Keeler, M., Letarte, J., Johnson, R., and Haynes, P.A. (2005) Comprehensive proteomics in yeast using chromatographic fractionation, gas phase fractionation, protein gel electrophoresis, and isoelectric focusing. Proteomics 5, 2018–2028 5. Futcher, B., Latter, G.I., Monardo, P., McLaughlin, C.S., and Garrells, J.I. (1999) A sampling of the yeast proteome. Mol. Cell. Biol. 19, 7357–7368 6. Ghaemmaghami, S., Huh, W.K., Bower, K., Howson, R.W., Belle, A., Dephoure, N. et al. (2003). Global analysis of protein expression in yeast. Nature 425, 737–741 7. Kurland, C.G. (1991) Codon bias and gene expression. FEBS Lett. 285, 165–169 8. Herbert, B., and Righetti, P.G. (2000) A turning point in proteome analysis: sample prefractionation via multicompartment electrolysers with isoelectric membranes. Electrophoresis 21, 3639–3648 9. Fey, S.J., and Larsen, P.M. (2001) 2-D or not 2-D. Two-dimensional gel electrophoresis. Curr. Opin. Chem. Biol. 5, 26–33 10. Righetti, P.G., Castagna, A., and Herbert, B. (2001) Prefractionation techniques in proteome analysis. Anal. Chem. 73, 320A–326A 11. Zuo, X., and Speicher, D.W. (2000) A method for global analysis of complex proteomes using sample prefractionation by solution isoelectrofocusing prior to two-dimensional electrophoresis. Anal. Biochem. 284, 266–278 12. Molloy, M.P., Herbert, B.R., Walsh, B.J., Tyler, M.I., Traini, M., Sanchez, J.C. et al. (1998) Extraction of membrane proteins by differential solubilization for separation using two-dimensional gel electrophoresis. Electrophoresis 19, 837–844 13. Corthals, G.L., Wasinger, V.C., Hochstrasser, D.F., and Sanchez, J.C. (2000) The dynamic range of protein expression: a challenge
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
for proteomic research. Electrophoresis 21, 1104–1115 Fountoulakis, M., Takács, M.F., Berndt, P., Langen, H., and Takács, B. (1999) Enrichment of low abundance proteins of Escherichia coli by hydroxyapatite chromatography. Electrophoresis 20, 2181–2195 Fountoulakis, M., Takács, M.F., and Takács, B. (1999) Enrichment of low-copy-number gene products by hydrophobic interaction chromatography. J. Chromatogr. A 833, 157–168 Richmond, C.S., Glasner, J.D., Mau, R., Jin, H., and Blattner, F.R. (1999) Genome-wide expression profiling in Escherichia coli K-12. Nucleic Acids Res. 27, 3821–3385 Velculescu, V.E., Zhang, L., Zhou, W., Vogelstein, J., Basrai, M.A., Bassett, D.E. Jr. et al. (1997) Characterization of the yeast transcriptome. Cell, 88, 243–251 Heller, M., Ye, M., Michel, P.E., Morier, P., Stalder, D., Jünger, M.A. et al. (2005) Added value for tandem mass spectrometry shotgun proteomics data validation through isoelectric focusing of peptides. J. Proteome Res. 4, 2273–2282 Hannig, K. (1978) Continuous free-flow electrophoresis as an analytical and preparative method in biology. J Chromatogr. 159, 183–191 Hoffmann, P., Ji, H., Moritz, R.L., Connolly, L.M., Frecklington, D.F., Layton, M.J. et al. (2001) Continuous free-flow electrophoresis separation of cytosolic proteins from the human colon carcinoma cell line LIM 1215: a non twodimensional gel electrophoresis-based proteome analysis strategy. Proteomics 1, 807–818 Xiao, Z., Conrads, T.P., Lucas, D.A., Janini, G.M., Schaefer, C.F., and Buetow, K.H. (2004) Direct ampholyte-free liquid-phase isoelectric peptide focusing: application to the human serum proteome. Electrophoresis 25, 128–133 Righetti, P.G., Wenisch, E., and Faupel, M. (1989) Preparative protein purification in a multi-compartment electrolyzer with immobiline membranes. J. Chromatogr. 475, 293–309 Righetti, P.G., Wenisch, E., Jungbauer, A., Katinger, H., and Faupel, M. (1990) Preparative purification of human monoclonal antibody isoforms in a multicompartment electrolyzer with Immobiline membranes. J. Chromatogr. 500, 681–696 Pedersen, S.K., Harry, J.L., Sebastian, L., Baker, J., Traini, M.D., McCarthy, J.T. et al. (2003) Unseen proteome: mining below the
Difficult Proteins
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
tip of the iceberg to find low abundance and membrane proteins. J. Proteome Research 2, 303–312 Fortis, F., Girot, P., Brieau, O., Boschetti, E., Castagna, A., and Righetti, P.G. Amphoteric buffering chromatographic beads for proteome prefractionation. I: Theoretical model. Proteomics 5, 620–628 Molloy, M.P., Herbert, B.R., Slade, M.B., Rabilloud, T., Nouwens, A.S., Williams, K.L., and Gooley, A.A. (2000) Proteomic analysis of the Escherichia coli outer membrane. Eur. J. Biochem. 267, 2871–2881 Michel, P.E., Reymond, P., Arnaud, I.L., Josserand, J., Girault, H.H., and Rossier, J.S. (2003) Protein fractionation in a multicompartment device using Off-Gel isoelectric focusing. Electrophoresis 24, 3–11 Hörth, P., Miller, C.A., Preckel, T., and Wenz, C. (2006) Efficient fractionation and improved protein identification by peptide OFFGEL electrophoresis. Mol. Cell. Proteomics 10, 1968–1974 Liu, T., Qian, W.J., Gritsenko, M.A., Xiao, W., Moldawer, L.L., Kaushal, A. et al. (2006) High dynamic range characterization of the trauma patient plasma proteome. Mol. Cell. Proteomics 10, 1899–1913 Shen, Y., Kim, J., Strittmatter, E.F., Jacobs, J.M., Camp II, D.G., Fang, R. et al. (2005) Characterization of the human blood plasma proteome. Proteomics 5, 4034–4045 Colantonio, D.A., Dunkinson, C., Bovenkamp, D.E., and Van Eyk, J.E. (2005) Effective removal of albumin from serum. Proteomics 5, 3831–3835 Thulasiraman, V., Lin, S., Gheorghiu, L., Lathrop, J., Lomas, L., Hammond, D., and Boschetti, E. (2005) Reduction of the concentration difference of proteins in biological liquids using a library of combinatorial ligands. Electrophoresis 26, 3561–3571 Righetti, P.G., Castagna, A., Antonucci, F., Piubelli, C., Cecconi, D., Campostrini, N. et al. (2005) Proteome analysis in the clinical chemistry laboratory: myth or reality? Clin. Chim. Acta 357, 123–139 Righetti, P.G., Boschetti, E., Lomas, L., and Citterio, A. (2006) Protein Equalizer Technology: the quest for a “democratic proteome”. Proteomics 6, 3980–3992 Anderson, L.N., Polanski, M., Pieper, R., Gatlin, T., Tirumalai, R.S., Conrads, T.P.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
63
et al. (2004) The human plasma proteome: a nonredundant list developed by combination of four separate sources. Mol. Cell. Proteomics 3, 311–326 Sennels, L., Salek, M., Lomas, L., Boschetti, E., Righetti, P.G., and Rappsilber, J. (2007) Proteomic analysis of human blood serum using peptide library beads. J Proteome Res. 6, 4055–4062 Santoni, V., Molloy, M., and Rabilloud, T. (2000) Membrane proteins and proteomics: un amour impossible? Electrophoresis 21, 1054–1070 Eymann, C., Dreisbach, A., Albrecht, D., Bernhardt, J., Becher, D., Gentner, S. et al. (2004) A comprehensive proteome map of growing Bacillus subtilis cells. Proteomics 4, 2849–2876 Wolff, S., Otto, A., Albrecht, D., Zeng, J.S., Buttner, K., Gluckmann, M. et al. (2006) Gelfree and gel-based proteomics in Bacillus subtilis: a comparative study. Mol. Cell. Proteomics 7, 1183–1192 Herbert, B., Galvani, M., Hamdan, M., Oliveri, E., McCarthy, J., Pedersen, S. et al. (2001) Reduction and alkylation of proteins in preparation of two-dimensional map analysis: why, when and how? Electrophoresis 22, 2046–2057 Galvani, M., Hamdan, M., Herbert, B., and Righetti, P.G. (2001). Reduction and alkylation of proteins in preparation of twodimensional map analysis: a kinetic study via MALDI-TOF MS. Electrophoresis 22, 2058–2065 Galvani, M., Rovatti, M., Hamdan, M., Herbert, B., and Righetti, P.G. (2001). Protein alkylation in presence/absence of thiourea in proteome analysis: A MALDI-TOF mass spectrometry investigation. Electrophoresis 22, 2066–2074 Luche, S., Diemer, H., Tastet, C., Chevallet, M., Van Dorsselaer, A., Leize-Wagner, E. et al. (2004). About thiol derivatization and resolution of basic proteins in two-dimensional electrophoresis. Proteomics 4, 551–561 Lander, E.S., Linton, L.M., Birren, B., Nusbaum, C., Zody, M.C., Baldwin, J. et al. (2001). Initial sequencing and analysis of the human genome. Nature 409, 860–921 Venter, J.C., Adams, M.D., Myers, E.W., Li, P.W., Mural, R.J., Sutton, G.G. et al. (2001). The sequence of the human genome. Science 291, 1304–1351
Chapter 5 Organelle Proteomics Matthias Plöscher, Bernhard Granvogl, Veronika Reisinger, Axel Masanek, and Lutz Andreas Eichacker Summary The proteome of the cell is at the frontier of being too complex for proteomic analysis. Organelles provide a step up. Organelles compartmentalize the cell enabling a proteome, physiology and metabolism analysis in time and in space. Protein complexes separated by electrophoresis have been identified as the next natural level to characterize the organelles’ compartmentalized membrane and soluble proteomes by mass spectrometry. Work on mitochondria and chloroplasts has shown where we are in the characterization of complex proteomes to understand the network of endogenous and extrinsic factors which regulate growth and development, adaptation and evolution. Key words: Organelle, Proteome, Electrophoresis, Mass spectrometry, Chloroplast, Mitochondria, Review.
1. Introduction All organisms rely on proteins to exist and solve biological problems. Proteins organize themselves into functional metabolic and regulatory pathways localized in a cell, tissue, or whole organism. To address the highly diverse range of protein functions, researchers today seek no less than identification of all the proteins and characterization of all the qualitative and quantitative changes in the cell’s complement of proteins. The information output complements the proteome; the information source is proteomics. A proteome includes information about the protein composition in space and time and about changes induced in proteins by internal or external signals. In proteomics, cells are of special interest since they represent the lowest biological organization state that can be David Sheehan and Raymond Tyther (eds.), Methods in Molecular Biology, Two-Dimensional Electrophoresis Protocols, vol. 519 © Humana Press, a part of Springer Science + Business Media, LLC 2009 DOI: 10.1007/978-1-59745-281-6_5
65
66
Plöscher et al.
maintained in a laboratory in culture. At the level of protein, three distinct steps are performed in proteomic investigations. Single species of proteins or protein complexes are isolated from protein mixtures, proteins are broken down into peptides, and peptides are identified by mass spectrometry (MS). The elucidation of the cell proteome from peptides is a challenging goal. At present, the proteome of a cell is just at the edge of being too complex to be analysed with all the tools and protocols employed in proteomics. Here, organelles provide a crucial step up. Organelles compartmentalize and organize the cell. A focus on organelle proteomes provides a basis to study the organization of the cell proteome in space. The defined developmental programs of the cell then provide the basis to understand the organization of the proteomic data in time. Finally, species-dependent changes of the proteome organelles indicate steps in the molecular evolution of the cell. Since, however, the complexity of the cellular protein complement is still much too high for in-depth proteomic analysis using the technical means we have at hand today, we will follow the natural staircase of cellular sub-compartmentalization. Cells are first fractionated into organelles, then high-quality MS-based proteomic data are obtained from proteins or peptides prepared by either ‘gel-based’ or ‘gel-free’ technology.
2. Isolation of Subcellular Organelles The starting point of any practical approach to carry out organelle proteomics is the selection of a suitable protocol for isolation of the organelle of interest. In most approaches, the tissue of interest is disrupted followed by mechanical destruction of the cell. Since the target of the whole subfractionation procedure is an organelle, often surrounded by a single or double lipid bilayer membrane, the mechanical stability of tissues and cells and the osmotic conditions of the cell matrix are of major importance. Stability varies widely between the different classes of organisms (e.g. plant, animal, fungi, or bacteria) and even within one organism (e.g. flower and stem within plants, or blood cells and bone cells in vertebrates). Forces applied to the organism, the tissue, and the cell to release organelles therefore have to be adopted carefully, and the vast majority of protocols for isolation of organelles start with the crude cutting of the starting material. This step preceding homogenization or grinding is often already performed in a buffer providing isoosmotic conditions for the organelles (1). Since the shear forces applied lead to a progressive destruction of the biological supramolecular architecture, the exposure time as well as the strength of these forces has to be optimized; other-
Organelle Proteomics
67
wise large-scale destruction of organelles cannot be avoided and organelle yield is compromised. As an alternative to mechanical shear forces for tissue disruption, cells may be released from tissues by an enzymatic approach. Peptide bond linkages between cells may be digested using one enzyme or enzyme cocktails, releasing intact cells into the medium. For sorting, individual cells in an isoosmotic medium can be handled like single-celled organisms. Sorting of cells can be performed using physical properties such as size, surface charge, colour, and fluorescence or chemical differences, e.g. specific surface molecules (2). After isolation of the desired cell population, cells are lysed to release organelles. Methods for lysis depend on the structural architecture of the cell. The presence and composition of a cell wall determines whether an osmotic swelling or treatment with detergents is sufficient for the disruption of the outer barrier or if mechanical shear forces have to be applied. In the presence of a cell wall, a particularly gentle way to free organelles from cells is digestion of the cell wall with enzymes to release protoplasts which are subsequently lysed using osmosis or to apply detergents to break up the membrane barrier. The resulting homogenate is the basis for separation of the different species of organelles by gradient centrifugation, free-flow electrophoresis, or immunoisolation (3). With respect to versatility and ease of use, gradient centrifugation has been established as the most widely used approach. The instrumental requirements and costs for maintenance are low, and the method is applicable to almost all types of organelles. The procedure is based on differences in organelle density and size. These differences give a distinct sedimentation pattern in a continuous gradient after centrifugation, theoretically allowing for a separation of the organelles in one step. In practice, the density of all types of organelles differs too little to use continuous gradients compromising yield and purity of the organelle fraction. Therefore, subsequent centrifugation steps with discontinuous gradients are selected to separate organelles either to the top, the bottom, or to an interphase of media exhibiting defined densities (4). As gradient media, most commonly sucrose, percoll, ficoll, and nycodenz are employed (5). The latter three are almost osmotically neutral media for density gradient formation; hypertonic sucrose solutions however can lead to dehydration of organelles like mitochondria and chloroplasts which are enclosed by a sucrose impermeable lipid membrane bilayer. With respect to purity of isolated organelles, methods that rely on the surface charge have been found to work best. Both the chromatographic two-phase partition technology pioneered by Per-Ake Albertsson and the electrophoretic method of freeflow electrophoresis rely on differences in the surface charge of organelles and can both perform separation in a continuous mode
68
Plöscher et al.
(6). In continuous two-phase partitioning, cell homogenate is applied to a mixture of two polymers: polyethylene–glycol and dextran. Partitioning of organelles according to surface properties occurs by repetitive mixing of polymer phases and separation by centrifugation. Major factors influencing separation are polymer molecular weight and concentration, temperature, ionic species, and pH. In free-flow electrophoresis, the homogenate is delivered by a pump to a separation chamber consisting of a buffer film flowing between two electrodes. The organelles are separated by their differing migration speeds in an electric field perpendicular to the flow of the buffer film. The different fractions are collected by pumps at the other end of the separation chamber. Since the handling of the devices was somewhat error prone and the net charges of an organelle can change, e.g. with the current physiological state, this technique has not been applied widely and has been used mostly in combination with other approaches like gradient centrifugation (6, 7). Finally, organelles may be enriched by immunoaffinity capture. The separation is based on recognition of surface epitopes on the outer phase of the organelle. Binding of the antibodies to a molecular support like a chromatographic matrix coupled to magnetic beads or protein A then allows for high specificity detection and high purity enrichment of organelles. Problems occur, since the detection of the epitope has to take place in the native state of the target protein and the antibody would also isolate aggregates of the target organelle with unspecific cell debris (3). These restrictions limit the use of the method to special cases when, after a prefractionation by gradient centrifugation, a preparation of highest purity of an organelle has to be achieved. However, it should not be overlooked that the principle of providing a second dimension of separation based on immunoaffinity or on surface charge in addition to conventional centrifugation purification protocols that rely on size and density has potential for a more precise, deeper, and more thorough investigation of organelle proteomes. In this respect, further information about techniques dedicated to organelle purification is needed as found in Olson et al. (8). Organelle purity is essential for experimental proteome quality. Proteins from other compartments found to co-isolate with an isolated organelle may only contaminate the sample; however, they may also well be true functional components of the isolated organelle and another cell compartment simultaneously, complicating the interpretation of proteome data. Hence, a majority of plant organelle proteomic studies focused on chloroplast and mitochondria, which can be well isolated and the purity characterized (9). For mitochondria, mostly cytochrome c oxidase (COX) is used as an enzymatic marker protein, whereas alkaline pyrophosphatase (PPase) is used to specify plastid purity (10).
Organelle Proteomics
69
Finally, it should be briefly noted that isolation of organelles is not the only means to identify the protein complement of an organelle. Chemical labelling or molecular cloning of a fluorescent protein (FP) onto a protein of interest may provide an excellent means to study localization of a protein of interest to a specific organelle in the cellular background and complement the proteomic investigations at the level of isolated organelles (10– 12). In the case of FPs, subcellular location can be visualized by autofluorescence after gene expression of the tagged protein and in vivo targeting to a specific organelle. Due to high quantum yields, FPs provide sensitive tools to follow biological molecules in real time. However, in order to avoid artefactual localization, fusion proteins have to meet several important criteria (13). First, the fluorescent protein should in general be stable over a wide range of the physiological conditions found in different subcellular compartments (e.g. pH tolerant). The insertion of the FP should minimally influence the conformation of the target protein and preserve native targeting signals and post-translational modification sites. Also, protein expression should occur from its native regulatory sequences to maintain its developmental and/ or tissue-specific regulation.
3. ElectrophoresisBased Proteomics The challenge for any investigation of an organelle proteome is the biochemical complexity, the number, and the dynamic range of proteins. First approaches to cope with this problem used the high capacity of gel-based electrophoretic systems for separation of proteins (see Chapter “Two-Dimensional Electrophoresis (2DE): An Overview”). Therefore, this first-generation approach was called ‘classical proteomics’. Thereafter, the term ‘gel-free’ was coined for all second-generation proteomic approaches that utilized the high capacity of chromatographic methods for peptide selection (14) (see also Chapter “Shotgun Protein Analysis by Liquid Chromatography-Tandem Mass Spectrometry”). To cope with the high number of proteins, two-dimensional electrophoresis (2DE) was developed in the 1970s (15). With this technique, a gold standard for high-resolution separation of up to 2,000 different protein spots per gel and for quantification of proteins down to 1 ng was established (16). Any new gel-based method has to match the standards set by 2DE. Despite its outstanding properties, 2DE has some limitations with respect to the biochemical complexity of organelle proteins. Most critical are under-representation of basic and highly hydrophobic membrane proteins (see Chapters “Solubilization of Proteins in
70
Plöscher et al.
2DE: An Outline”, “Difficult Proteins”, “Protein Extraction for 2DE”, “2DE for Proteome Analysis of Human Metaphase Chromosomes”, “Microsomal Proteomics”, “Pre-Fractionation Using Microscale Solution IEF”). For example, alkaline proteins are the major cause of problems in 2DE of bacterial species (17, 18). Basic proteins are charged positive at neutral pH, and near the cathode spots were found not to focus but to streak over a wider pH range. For precise focusing, wide pH gradients combined with short separation distances and running times were found to be advantageous (14). In addition, application of additional DTT or a replacement of the strip holder after the rehydration step was found to decrease streaking (19, 20). Membrane proteins received highest interest since most drug targets are completely or in part embedded into the lipid bilayer phase of a membrane (21). Due to the low solubilization capacity of non-ionic detergents employed in IEF–PAGE and the tendency of membrane proteins to aggregate around their pI, separation of membrane proteins by classical 2DE did not yield good results (22). A 2DE approach has therefore, in many instances, been abandoned and only the second step comprising separation of proteins according to molecular mass employed. In these approaches, the ionic detergent SDS has been proven to be the most widely applicable detergent for membrane protein solubilization (23–25). However, the resolution of this one-dimensional SDS–PAGE (1DE) approach is limited. Compared to 2DE, in 1DE the number of individual separated spots is about 400-fold less. Therefore, alternative twodimensional separation strategies were developed for the analysis of membrane proteins. Two different two-dimensional separation strategies were followed. First, both dimensions were carried out under denaturing conditions. In this case different ionic detergents like SDS, 16-BAC, or CTAB were used for the first dimension (for review see 26). All these approaches were combined with SDS–PAGE as second dimension. For highly hydrophobic membrane proteins, SDS/SDS–PAGE experiments were shown to yield best results resolving twofold to fivefold more proteins compared to 1DE (27, 28). Second, membrane proteins were separated in their native state in the first dimension, whereas the second dimension was again denaturing. Since many membrane proteins form multi-subunit complexes in their functional state, methods which retain the native state are of special interest. Native complex separation is achieved by solubilization of membrane protein complexes by non-ionic detergents and separation of the solubilized complexes by CN, hrCN-, or BN–PAGE (see Chapter “Blue Native Gel Electrophoresis (BN–PAGE) Proteomics”) (29–31). A special feature of all three methods is direct identification of a protein or protein complexes that are separated in the gel by catalytic activity. This opens a completely new area for proteomic
Organelle Proteomics
71
investigations of organelles, since identification of complex metabolic pathways assembled in protein complexes will be possible. For solubilization of protein complexes non-ionic detergents like digitonin, n-dodecyl-β-D-maltoside, or Triton were most widely used. The separation principle in CN–PAGE relies on the net negative charge of the protein in the pH background of the gel, whereas in BN and hrCN–PAGE negative charges are externally provided to the complexes by Coomassie blue and bile salts, respectively. As a result of the electrophoretic setup, separation of proteins in CN–PAGE is useful for protein complexes with a pI above seven and normally yields a lower resolution than BN or hrCN–PAGE. For analysis of the subunit composition of the complexes, all three methods are combined with SDS–PAGE as a second dimension. Another challenging aspect of gel-based approaches is the limited amount of sample which can be loaded. The dynamic range of gel-based experiments is at 103–104 (16), whereas in cells and organelles, the dynamic range of protein copies per cell covers a range of about 106 (32). Hence, problems encountered in the detection of low abundant proteins were the basis for the development of ‘gel-free’ approaches which, for proteome characterization, was in most cases linked to an MS-based identification of separated peptides.
4. Mass SpectrometryBased Proteomics
Proteomics relies on fast and reliable identification of a large number of different proteins. Here, only MS has been found to enable protein identification at a large scale. In sample preparation for MS analysis, proteolytic digestion of proteins to peptides is the first step (see Chapters “Shotgun Protein Analysis by Liquid Chromatography-Tandem Mass Spectrometry”, “De Novo Sequence Analysis of N-Terminal Sulfonated Peptides After InGel Guanidination”, “Tryptic Digestion of In-Gel Proteins for Mass Spectrometry Analysis”). This step is either achieved before or after separation of proteins by gel-based electrophoresis (33). For peptide identification, currently two different systems are used to ionize and transfer peptides in the gas phase for accurate mass analysis: Matrix-Assisted Laser Desorption/Ionization (MALDI) (34) and ElectroSpray Ionization (ESI) (35). In combination with genome sequencing projects and elaborate bioinformatic data analysis capabilities (see Chapters “Tryptic Digestion of In-Gel Proteins for Mass Spectrometry Analysis” and “Database Interrogation Algorithms for Identification of Proteins in Proteomic Separations”), an efficient system for protein identification by peptide
72
Plöscher et al.
sequencing or peptide mass fingerprint analysis linked to database searching has been established (36). Still, the quality of the MS analysis is compromised by the complexity of the protein complement of a cell or cellular subfraction. To maintain high-quality analysis, protein samples are first separated by 2DE, which results in a low protein complexity of one to three proteins per spot. For these samples, MALDI sources combined with Time-Of-Flight (TOF) MS (MALDI-TOF) are widely used. If the complexity is low, determination of the identity of a protein is software driven, rapid, and simple. By digestion with an endoprotease, peptides are generated from proteins; a number of masses are identified by the mass spectrometer and are written into a list called a peptide mass fingerprint (PMF). The result is compared with a list of theoretical masses generated in silico from a protein database and statistically evaluated (37–39). If there is more than one protein in the sample, results fail to be significant often with increasing complexity of the sample. But also a low number of assigned peptides or missing of the protein in the database leads to no significant matches or false positive identifications. As one possibility to overcome the issue associated with protein complexity in MS, fragment spectra of the single peptide mass signals (MS/MS) may be recorded. The fragmentation of a parent ion (peptide) is the result of collision-induced dissociation (CID). The MS/MS data contain information about the amino acid composition of a peptide and can be evaluated to calculate the de novo sequence (40–42). The advantage of de novo sequencing technology is that the alignment of peptide sequences to signals of fragment ions in the mass spectrum does not require alignment with any database information (40). Still, if the protein corresponding to the peptide sequenced is not found in the database, a homology search algorithm like Fasta (43) may be used to obtain significant and biologically relevant matches. A second step to analyse protein samples with high complexity is to separate the corresponding peptide mixtures by high-performance liquid chromatography (HPLC) systems (see Chapter “Shotgun Protein Analysis by Liquid Chromatography-Tandem Mass Spectrometry”). In these approaches, HPLC systems are equipped with reversed-phase C18 columns which are directly connected to an ESI source MS. Together with a flow rate of down to 50 nL/min, peptide separation and concentration is achieved immediately before the ionization step, resulting in a substantial increase of sensitivity (44, 45). Such ‘online’ approaches are often ‘gel-free’ without any prior gel electrophoretic separation of protein samples. However, although more than one chromatographic step is usually employed, full separation of complex peptide mixtures has not been achieved by one single combination of chromatographic matrices, making this multidimensional protein
Organelle Proteomics
73
identification technology (MudPIT) technologically challenging (46, 47). An additional aspect of functional proteome analysis concerns post-translational modifications (PTMs) which might have a major influence on a protein’s function, activation state, or its cellular localization (see Chapters “Detection of 4-Hydroxy-2-Nonenaland 3-Nitrotyrosine-Modified Proteins Using a Proteomics Approach”, “Proteomic Detection of Oxidized and Reduced Thiol Proteins in Cultured Cells”, “Phosphoproteome Analysis by In-Gel Isoelectric Focusing and Tandem Mass Spectrometry”, “Detection of Protein Glutathionylation”). MS techniques are of prime importance to identify phosphorylation, glycosylation, acetylation, or methylation of proteins (48, 49). Modern MS techniques do not only allow qualitative proteome analysis, but also quantitative techniques have been developed in recent years. For a relative quantification of protein levels, different methods for chemical labelling of proteins and peptides with stable isotopes have been published. Thiol-reactive isotope coded affinity tags (ICAT) may be used. Cysteines in peptides from two different samples are labelled with two different ICAT reagents. One tag contains only hydrogens, the other only deuterium atoms resulting in a distinct mass difference of eight Daltons. The two samples are combined and after MS analysis, relative quantification of the deuterium labelled relative to the hydrogen labelled peptides is possible which is directly proportional to the intensity of the signals of each different labelled peptide (50). Another method is dependent on four isobaric tags which are reactive to amino groups and can be differentiated by MS/MS (iTRAQ). This method allows the simultaneous quantification of up to four samples and, as an additional advantage, the method is not limited to peptides with cysteine residues only (51, 52). In contrast to labelling peptides with isotope coded tags, label-free methods have also been developed for use with LC-MS. These methods depend on reproducible chromatographic separation systems in combination with a high mass resolution and a high mass accuracy. LC-MS/MS is used to generate a chromatogram of the signal intensity of unlabelled peptides (MS) over time and of the signal intensity of peptide fragments (MS/ MS) over the mass-to-charge ratio. With the software DeCyder™ MS (DeCyderMS) the signal intensity can be analysed during an automated detection and a relative quantification of peptides is possible via the 2DE data analysis (53). Another approach combines MS data with MSE data, a method where no precursor ion is isolated separately, but the collision energy is ramped resulting in fragment ions of all peptides simultaneously (54). With this method, not only identification and relative quantification is possible, even an absolute quantification of proteins can be achieved (55). However, how do these methods perform when it comes to
74
Plöscher et al.
identification of an organelle proteome? Let us look at the proteome of two major organelles of the plant and animal cell.
5. The Chloroplast Proteome In a eukaryotic plant cell (see also Chapter “Preparation and Analysis of Plastid Proteomes by 2DE”), chloroplasts are the characteristic organelle where photosynthesis occurs. Chloroplasts can be easily isolated in high amounts from green leaves. As sub-proteomes, the stroma, the thylakoid lumen, the thylakoid, and the envelope membranes can be well differentiated (for reviews see 56, 57) A potential proteome of chloroplasts may be selected in silico from genomic data by using subcellular localization prediction programs such as Predotar (http://urgi.versailles.inra.fr/ predotar/predotar.html) (58), TargetP (http://www.cbs.dtu.dk/ services/TargetP) (59, 60), or WoLF PSORT (http://wolfpsort. seq.cbrc.jp) (61). These in silico approaches define the organelle proteome on the basis of N-terminal presequences that were experimentally indicated to target the nuclear-encoded and cytoplasmically expressed protein to a specific organelle (62, 63). Programs were tested and chloroplast targeting was found closely to match experimental data (64). Also, for the determination of proteins destined for a suborganellar compartment like the membranes or the chloroplast lumen, prediction programs were developed. TMHMM, a program for prediction of transmembrane domains (http://www.cbs.dtu.dk/services/TMHMM-2.0), may be a start to map a membrane proteome, or LumenP, a predictor for the luminal proteome of chloroplast, may help to specify protein identification (65). In an early attempt to identify the chloroplast proteome of Arabidopsis thaliana, Abdallah et al. (66) used ChloroP to predict a number of 1,900–2,500 proteins including proteins encoded by nuclear and chloroplast DNA (http://www. cbs.dtu.dk/services/ChloroP) (66, 67). A more differentiated study was then carried out by Sun et al. (68). Here, experimental datasets published with respect to the localization of proteins within organelle compartments were combined with prediction programs to predict the proteome of chloroplasts of A. thaliana. A number of 4,255 nuclear-encoded non-redundant proteins were found. This number of proteins was differentiated in the soluble proteins of the lumenal proteome (285–291 proteins) and of the stromal proteome (3,387 proteins), the combined integral membrane proteome of thylakoids and inner membranes (520 proteins), and the thylakoid membrane proteins containing a luminal transit peptide (57 proteins) (68).
Organelle Proteomics
75
In order to link theoretical with experimental data, several databases have been built up independently. Results of the study by Sun et al. (68) were integrated in the plastid proteome database (PPDB; http://ppdb.tc.cornell.edu) (69). Another database focused on plastid proteomes that differentiates between the proteome of chloroplasts, etioplasts, and undifferentiated plastids is ‘plprot’ (http://www.plprot.ethz.ch). At the time of publication plprot contains 2,043 protein entries and allows a BLAST search to obtain comparative information on the proteomes of different plastid types (70). Besides plastid-specific databases, a combinatorial database for experimental and predicted datasets to localize subcellular compartmentation of proteins in A. thaliana is available as SUBA (http://www.suba.bcs.uwa.edu.au) (71, 72). This database is a comprehensive accumulation of protein location and further protein characteristics, encompassing the plastid, mitochondrion, peroxisome, nucleus, plasma membrane, endoplasmatic reticulum, vacuole, Golgi, cytoskeleton general structures, and the cytosol. The experimental SUBA datasets are based on MS techniques, visualization of fluorescent proteins attached to selected proteins, and on the analysis of entries in the SwissProt database, and are combined with the use of different prediction tools (71). Although a prediction of the theoretical size of the plastid proteome and sub-proteome provides a value independent of biochemical constrains, this value has to be validated by proteomic results providing evidence that predicted proteins are identified at predicted locations. In one attempt to localize the thylakoid membrane proteome, thylakoids were isolated from barley chloroplasts, proteins were separated by a 2-D Blue Native/SDS– PAGE system, and peptides were identified by nano-ESI-MS/ MS identification. Here, 56 membrane proteins were explicitly detected by de novo sequence analysis (73). Although the approach resulted in a precise determination of the identity of the protein’s localization and of its belonging to a distinct protein complex, it was obvious that especially small hydrophobic membrane proteins were not detected selectively. In another explicit study of thylakoids from A. thaliana, 2DE was combined with organic solvent extraction of hydrophobic membrane proteins, and MALDI-TOF MS analysis was combined with nanoLC-ESI MS/MS for protein identification (69). In this study, 154 proteins were identified, including 83 out of 100 thylakoid membrane proteins known to belong to the photosynthetic apparatus. In another detailed study, 32 proteins of plastid localized plastoglobuli were detected (74). More specialized proteomic analyses of chloroplasts also included post-translational modification of proteins. Phosphorylation was addressed by the group of Aro et al. (75), whereas glycosylation (76) was addressed in a detailed study of proteomic changes during the interaction of the
76
Plöscher et al.
pathogen Fusarium graminearum and its host Triticum aestivum including quantitative changes of the proteome and the role of a glycosylation during infection (76). To further analysis especially of membrane proteomes, a review about the isolation of different plant membranes has been recently published (77).
6. The Mitochondrial Proteome In eukaryote cells, the mitochondrion is the key organelle for cellular respiration. Mitochondrial core functions are oxidative phosphorylation, amino acid metabolism, fatty acid oxidation, and iron-sulphur cluster assembly. Hence, mitochondrial proteins have been highly conserved in all types of organisms during evolution. A number of systematic studies in model organisms contributed to identifying mitochondrial proteins in general and facilitated the identification of human mitochondrial disease genes (78, 79; see also Chapter “Blue Native Gel Electrophoresis (BN–PAGE) Proteomics”). The genome size of mitochondria ranges from 16 kb in humans to more than 500 kb in particular plant species (80) encoding three (Plasmodium falciparum) to 85 proteins (A. thaliana) (81). By comparison, the mtDNA of yeast (Saccharomyces cerevisiae) contains about 86 kb encoding 30 proteins (82). Most of the genes encode key components of vital mitochondrial functions like aerobic respiration and translation (e.g. ATP synthase subunits, cytochrome oxidases, and ribosomal protein genes). If organisms are compared, the number of predicted mitochondrial proteins increases with the size of the genome indicating a relation between genome and proteome complexity of the organelle(s) (81). Furthermore, the number of mitochondriarelated proteins varies subject to cell type and organism. In contrast to the small number of 30 proteins encoded in the yeast mitochondrial genome, at least 800–1,000 proteins with assigned functions occur in the yeast mitochondrion (81, 83, 84). Also in A. thaliana the occurrence of 2,000–3,000 mitochondrial proteins is predicted (60, 81), and about 1,000–4,000 mitochondrial proteins are predicted for the differentiated mammalian cells of humans (81, 85). Hence, there is no doubt that the majority of mitochondrial proteins are encoded in the nucleus and are subsequently imported into the mitochondrion. However, the specific identity of nuclear genes predicted to encode proteins targeted to mitochondria is not completely defined. According to the high number of proteins imported into mitochondria, the ability of programs (e.g. PSORT, TargetP, and
Organelle Proteomics
77
MitoProt) to predict the number of mitochondrial proteins from various eukaryotes has been investigated in detail. However, in contrast to plant chloroplasts, these methods failed to attain sufficient specificity (low number of false positives, but loss of true positives) and sensitivity (high number of false positives) to produce confident estimates. In addition, numerous mitochondrial membrane proteins are known not to contain the characteristic N-terminal sequences found in most matrix proteins. In summary, the individual programs correctly predicted about 60% of the experimentally identified mitochondrial proteins (81, 86), and the algorithms detect solely those proteins that utilize an amino-terminal presequence. Hence, proteins with internal targeting signals were not considered. However, the rising number of experimentally identified proteins which are assigned to mitochondria may now be used as training sets to improve the targeting prediction algorithms. To verify the mitochondrial proteome experimentally, numerous proteome analyses of mitochondria from different species and tissues have been published in the last decade. The application of 1DE in combination with LC-MS/MS analysis of the digested proteins led to identification of ~179 different gene products, which corresponded to about 20% of the yeast mitochondrial proteins (87). Sickmann et al. used a couple of strategies for protein separation and MS analysis (88). After protein separation by 1DE or 2DE, proteins were digested with four different proteases. Resulting peptides were analysed by multidimensional liquid chromatography (MDLC) coupled to ESI-MS or nano-LC-MS/ MS. Utilization of multiple approaches assured wide coverage of proteins with different properties. The combined data resulted in 750 proteins which could be related to yeast mitochondria. Based on the predicted mitochondrial proteins in the literature, it was calculated that the identified proteins represent ~ 90% of all mitochondrial proteins. Another study used a ‘shotgun strategy’ to identify 546 proteins from membranes and matrix fractions of mitochondria (64). Proteins identified in both studies were compared to the MitoP2 database (http://ihg.gsf.de/mitop), which contained 477 entries. However, only 238 proteins were present in all three datasets. This dataset therefore represented about a quarter of the total protein number predicted for mitochondria. The set of newly identified mitochondrial proteins in the proteomic approaches comprised about 100 proteins which were confirmed by GFP localization (89). The mitochondrial proteome of the model plant A. thaliana was also subjected to multiple analyses (for a review see 90). Initial investigations of the protein composition by traditional 2DE separations of a cell culture from A. thaliana revealed ~350 and 800 mitochondrial protein spots (91, 92). Millar et al. analysed about
78
Plöscher et al.
half of the detected spots after tryptic digestion using MALDI-MS (91), and the data analysis resulted in ~90 distinct protein matches from mitochondria. In a second study, only 51 distinct proteins (about 12%) of the 800 resolved spots were successfully identified by immunoblotting, Edman degradation, and MS/MS-analysis of internal peptides (92). However, the spot number detectable in a 2DE gel is not always significant in estimating the number of total proteins of the corresponding proteome. First, the spot number does not correlate to the number of non-redundant proteins, because a single protein often results in multiple protein spots. Hence, the non-redundant set of proteins in these gels can be considerably lower. On the other hand, limitations in resolution of the gel-based approach can lead to overlapped spots and low-abundance proteins are invisible due to the presence of highabundance proteins that limit the loading capacity for separation in 2DE. In addition, the method is not suitable for isolation of highly hydrophobic or alkaline proteins. The largest dataset of mitochondrial proteins from A. thaliana was again obtained by the ‘shotgun’ technique. Direct analysis of peptides, derived from trypsin digestion of complex polypeptide mixtures, by LC-MS/ MS led to the identification of 416 non-redundant proteins (10). About 60% of these were newly identified by this LC-MS/MS approach. The gel-free strategy was superior especially for identification of large, small, and basic proteins. The dataset also contained a significant number of low-abundance proteins involved in DNA synthesis, transcriptional regulation, protein complex assembly, and cell signalling. For human mitochondria, about half of the estimated proteins localized or functionally associated with mitochondria are now known. The proteome of human-heart mitochondria was investigated with two different methods (93, 94). In a gel-based approach, mitochondrial protein complexes were pre-fractionated by density gradient centrifugation followed by 1DE for separation of the complex subunits. After in-gel digestion, resulting peptides were analysed by LC-MS/MS. In a second approach, proteins from mitochondria preparations were solubilized by 8 M urea and subsequently divided into ‘soluble’ and ‘insoluble’ fractions. Both fractions were chemically and enzymatically digested, and data obtained from multidimensional LC-MS/MS experiments were used for protein identification. Using these techniques a total of 680 mitochondrial or mitochondria-associated proteins were identified. Still, despite the strong progress in completion of the mitochondrial proteome, it appears that none of the approaches provided a complete answer to the questions: Which of the proteins belong to the mitochondrial proteome? How similar are the mitochondrial proteomes from different organisms and tissues?
Organelle Proteomics
79
References 1. Yu, C., and Cohen, L. (2004) Tissue sample preparation – not the same old grind. LC-GC Europe 17, 96–103 2. Pappas, D., and Wang, K. (2007) Cellular separations: a review of new challenges in analytical chemistry. Anal Chim Acta 601, 26–35 3. Pasquali, C., Fialka, I., and Huber, L. A. (1999) Subcellular fractionation, electromigration analysis and mapping of organelles. J Chromatogr B Biomed Sci Appl 722, 89–102 4. James Morre, D., and Andersson, B. (1999) Isolation of all major organelles and membranous cell components from a single homogenate of green leaves. Methods Enzymol 228, 412–419 5. Murayama, K., Fujimura, T., Morita, M., and Shindo, N. (2001) One-step subcellular fractionation of rat liver tissue using a Nycodenz density gradient prepared by freezing-thawing and two-dimensional sodium dodecyl sulfate electrophoresis profiles of the main fraction of organelles. Electrophoresis 22, 2872–2880 6. Krivankova, L., and Bocek, P. (1998) Continuous free-flow electrophoresis. Electrophoresis 19, 1064–1074 7. Zischka, H., Weber, G., Weber, P. J., Posch, A., Braun, R. J., Buhringer, D., et-al. (2003) Improved proteome analysis of Saccharomyces cerevisiae mitochondria by free-flow electrophoresis. Proteomics 3, 906–916 8. Olson, K. J., Ahmadzadeh, H., and Arriaga, E. A. (2005) Within the cell: analytical techniques for subcellular analysis. Anal Bioanal Chem 382, 906–917 9. Dunkley, T. P., Dupree, P., Watson, R. B., and Lilley, K. S. (2004) The use of isotope-coded affinity tags (ICAT) to study organelle proteomes in Arabidopsis thaliana. Biochem Soc Trans 32, 520–523 10. Heazlewood, J. L., Tonti-Filippini, J. S., Gout, A. M., Day, D. A., Whelan, J., and Millar, A. H. (2004) Experimental analysis of the Arabidopsis mitochondrial proteome highlights signaling and regulatory components, provides assessment of targeting prediction programs, and indicates plant-specific mitochondrial proteins. Plant Cell 16, 241–256 11. Chalfie, M., Tu, Y., Euskirchen, G., Ward, W. W., and Prasher, D. C. (1994) Green fluorescent protein as a marker for gene expression. Science 263, 802–805 12. Hanson, M. R., and Kohler, R. H. (2001) GFP imaging: methodology and application to investigate cellular compartmentation in plants. J Exp Bot 52, 529–539
13. Tian, G. W., Mohanty, A., Chary, S. N., Li, S., Paap, B., Drakakaki, G., et-al. (2004) Highthroughput fluorescent tagging of full-length Arabidopsis gene products in planta. Plant Physiol 135, 25–38 14. Canas, B., Pineiro, C., Calvo, E., Lopez-Ferrer, D., and Gallardo, J. M. (2007) Trends in sample preparation for classical and second generation proteomics. J Chromatogr A 1153, 235–258 15. O’Farrell, P. H., (1975) High resolution twodimensional electrophoresis of proteins. J Biol Chem 250, 4007–4021 16. Lopez, J. L. (2007) Two-dimensional electrophoresis in proteome expression analysis. J Chromatogr B Analyt Technol Biomed Life Sci 849, 190–202 17. Drews, O., Reil, G., Parlar, H., and Gorg, A. (2004) Setting up standards and a reference map for the alkaline proteome of the Grampositive bacterium Lactococcus lactis. Proteomics 4, 1293–1304 18. Cordwell, S. J., Basseal, D. J., Bjellqvist, B., Shaw, D. C., and Humphery-Smith, I. (1997) Characterisation of basic proteins from Spiroplasma melliferum using novel immobilised pH gradients. Electrophoresis 18, 1393–1398 19. Görg, A., Boguth, G., Obermaier, C., Posch, A., and Weiss, W. (1995) Two-dimensional polyacrylamide gel electrophoresis with immobilized pH gradients in the first dimension (IPGDalt): the state of the art and the controversy of vertical versus horizontal systems. Electrophoresis 16, 1079–1086 20. López, J.-L., and Humphery-Smith, I. (2003) New improvements for high-resolution and high-protein load using basic two-dimensional electrophoresis gels. Genome Letts 2, 93–97 21. Hopkins, A. L., and Groom, C. R. (2002) The druggable genome. Nat Rev Drug Discov 1, 727–730 22. Kashino, Y. (2003) Separation methods in the analysis of protein membrane complexes. J Chromatogr B Analyt Technol Biomed Life Sci 797, 191–216 23. Simpson, R. J., Connolly, L. M., Eddes, J. S., Pereira, J. J., Moritz, R. L., and Reid, G. E. (2000) Proteomic analysis of the human colon carcinoma cell line (LIM 1215): development of a membrane protein database. Electrophoresis 21, 1707–1732 24. Pisareva, T., Shumskaya, M., Maddalo, G., Ilag, L., and Norling, B. (2007) Proteomics
80
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
Plöscher et al. of Synechocystis sp. PCC 6803. Identification of novel integral plasma membrane proteins. FEBS J 274, 791–804 Weiner, J. H., and Li, L. (2007) Proteome of the Escherichia coli envelope and technological challenges in membrane proteome analysis. Biochim Biophys Acta 1778, 1698–1713 Braun, R. J., Kinkl, N., Beer, M., and Ueffing, M. (2007) Two-dimensional electrophoresis of membrane proteins. Anal Bioanal Chem 389, 1033–1045 Rais, I., Karas, M., and Schagger, H. (2004) Two-dimensional electrophoresis for the isolation of integral membrane proteins and mass spectrometric identification. Proteomics 4, 2567–2571 Williams, T. I., Combs, J. C., Thakur, A. P., Strobel, H. J., and Lynn, B. C. (2006) A novel Bicine running buffer system for doubled sodium dodecyl sulfate – polyacrylamide gel electrophoresis of membrane proteins. Electrophoresis, 27, 2984–2995 Krause, F. (2006) Detection and analysis of protein-protein interactions in organellar and prokaryotic proteomes by native gel electrophoresis: (membrane) protein complexes and supercomplexes. Electrophoresis 27, 2759–2781 Wittig, I. and Schagger, H. (2005) Advantages and limitations of clear-native PAGE. Proteomics 5, 4338–4346 Wittig, I., Karas, M., and Schagger, H. (2007) High resolution clear native electrophoresis for in-gel functional assays and fluorescence studies of membrane protein complexes. Mol Cell Proteomics 6, 1215–1225 Corthals,G.L.,Wasinger,V.C.,Hochstrasser,D.F., and Sanchez, J. C. (2000) The dynamic range of protein expression: a challenge for proteomic research. Electrophoresis 21, 1104–1115 Granvogl, B., Ploscher, M., and Eichacker, L. A. (2007) Sample preparation by in-gel digestion for mass spectrometry-based proteomics. Anal Bioanal Chem 389, 991–1002 Karas, M., and Hillenkamp, F. (1988) Laser desorption ionization of proteins with molecular masses exceeding 10,000 daltons. Anal Chem 60, 2299–2301 Fenn, J. B., Mann, M., Meng, C. K., Wong, S. F., and Whitehouse, C. M. (1989) Electrospray ionization for mass spectrometry of large biomolecules. Science 246, 64–71 Shevchenko,A.,Jensen,O.N.,Podtelejnikov,A.V., Sagliocco, F. Wilm, M., and Vorm, O. (1996) Linking genome and proteome by mass spectrometry: large-scale identification of yeast
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
proteins from two dimensional gels. Proc Natl Acad Sci U S A 93, 14440–14445 James, P., Quadroni, M., Carafoli, E., and Gonnet, G. (1993) Protein identification by mass profile fingerprinting. Biochem Biophys Res Commun 195, 58–64 Henzel, W. J., Billeci, T. M., Stults, J. T., Wong, S. C., Grimley, C., and Watanabe, C. (1993) Identifying proteins from two-dimensional gels by molecular mass searching of peptide fragments in protein sequence databases. Proc Natl Acad Sci U S A 90, 5011–5015 Yates, J. R., Speicher, S., Griffin, P. R., and Hunkapiller, T. (1993) Peptide mass maps: a highly informative approach to protein identification. Anal Biochem 214, 397–408 Mann, M., and Wilm, M. (1994) Errortolerant identification of peptides in sequence databases by peptide sequence tags. Anal Chem 66, 4390–4399 Yates, J. R., Eng, J. K., McCormack, A. L., and Schieltz, D. (1995) Method to correlate tandem mass spectra of modified peptides to amino acid sequences in the protein database. Anal Chem 67, 1426–1436 Rowley, A., Choudhary, J. S., Marzioch, M., Ward, M. A., Weir, M., Solari, R. C., and Blackstock, W. P. (2000) Applications of protein mass spectrometry in cell biology. Methods 20, 383–397 Pearson, W. R. (1990) Rapid and sensitive sequence comparison with FASTP and FASTA. Methods Enzymol 183, 63–98 Gatlin, C. L., Kleemann, G. R., Hays, L. G., Link, A. J., and Yates, J. R. (1998) Protein identification at the low femtomole level from silver-stained gels using a new fruitless electrospray interface for liquid chromatographymicrospray and nanospray mass spectrometry. Anal Biochem 263, 93–101 Frohlich, T., and Arnold, G. J. (2006) Proteome research based on modern liquid chromatography – tandem mass spectrometry: separation, identification and quantification. J Neural Transm 113, 973–994 McDonald, W. H., and Yates, J. R. (2002) Shotgun proteomics and biomarker discovery. Dis Markers 18, 99–105 Washburn, M. P. (2004) Utilisation of proteomics datasets generated via multidimensional protein identification technology (MudPIT). Brief Funct Genomic Proteomic 3, 280–286 Wilkins, M. R., Gasteiger, E., Gooley, A. A., Herbert, B. R., Molloy, M. P., Binz, P. A., et al. (1999) High-throughput mass spectrometric discovery of protein post-translational modifications. J Mol Biol 289, 645–657
Organelle Proteomics 49. Mann, M., and Jensen, O. N. (2003) Proteomic analysis of post-translational modifications. Nat Biotechnol 21, 255–261 50. Gygi, S. P., Rist, B., Gerber, S. A., Turecek, F., Gelb, M. H., and Aebersold, R. (1999) Quantitative analysis of complex protein mixtures using isotope-coded affinity tags. Nat Biotechnol 17, 994–999 51. Ross, P. L., Huang, Y. N., Marchese, J. N., Williamson, B., Parker, K., Hattan, S., et al. (2004) Multiplexed protein quantitation in Saccharomyces cerevisiae using amine-reactive isobaric tagging reagents. Mol Cell Proteomics 3, 1154–1169 52. Aggarwal, K., Choe, L. H., and Lee, K. H. (2006) Shotgun proteomics using the iTRAQ isobaric tags. Brief Funct Genomic Proteomic 5, 112–120 53. Johansson, C., Samskog, J., Sundstrom, L., Wadensten, H., Bjorkesten, L., and Flensburg, J. (2006) Differential expression analysis of Escherichia coli proteins using a novel software for relative quantitation of LC-MS/MS data. Proteomics 6, 4475–4485 54. Silva, J. C., Denny, R., Dorschel, C. A., Gorenstein, M., Kass, I. J., Li, G. Z., et al..(2005) Quantitative proteomic analysis by accurate mass retention time pairs. Anal Chem 77, 2187–2200 55. Silva, J. C., Gorenstein, M. V., Li, G. Z., Vissers, J. P., and Geromanos, S. J. (2006) Absolute quantification of proteins by LCMSE: a virtue of parallel MS acquisition. Mol Cell Proteomics 5, 144–156 56. Schroder, W. P., and Kieselbach, T. (2003) Update on chloroplast proteomics. Photosynth Res 78, 181–193 57. Ephritikhine, G., Ferro, M., and Rolland, N. (2004) Plant membrane proteomics. Plant Physiol Biochem 42, 943–962 58. Small, I., Peeters, N., Legeai, F., and Lurin, C. (2004) Predotar: a tool for rapidly screening proteomes for N-terminal targeting sequences. Proteomics 4, 1581–1590 59. Nielsen, H., Engelbrecht, J., Brunak, S., and von Heijne, G. (1997) Identification of prokaryotic and eukaryotic signal peptides and prediction of their cleavage sites. Protein Eng 10, 1–6 60. Emanuelsson, O., Nielsen, H., Brunak, S., and von Heijne, G. (2000) Predicting subcellular localization of proteins based on their N-terminal amino acid sequence. J Mol Biol 300, 1005–1016 61. Horton, P., Park, K. J., Obayashi, T., Fujita, N., Harada, H., Adams-Collier, C. J., and Nakai, K. (2007) WoLF PSORT: protein localization predictor. Nucleic Acids Res 35, W585–W587
81
62. Pfanner, N. (2000) Protein sorting: recognizing mitochondrial presequences. Curr Biol 10, R412–R415 63. Bruce, B. D. (2001) The paradox of plastid transit peptides: conservation of function despite divergence in primary structure. Biochim Biophys Acta 1541, 2–21 64. Gomez, S. M., Bil’, K. Y., Aguilera, R., Nishio, J. N., Faull, K. F., and Whitelegge, J. P. (2003) Transit peptide cleavage sites of integral thylakoid membrane proteins. Mol. Cell Proteomics 2, 1068–1085 65. Westerlund, I., Von Heijne, G., and Emanuelsson, O. (2003) Lumen P - a neural network predictor for protein localization in the thylakoid lumen. Protein Sci 12, 2360–2366 66. Abdallah, F., Salamini, F., and Leister, D. (2000) A prediction of the size and evolutionary origin of the proteome of chloroplasts of Arabidopsis. Trends Plant Sci 5, 141–142 67. Emanuelsson, O., Nielsen, H., and von Heijne, G. (1999) ChloroP, a neural networkbased method for predicting chloroplast transit peptides and their cleavage sites. Protein Sci 8, 978–984 68. Sun, Q., Emanuelsson, O., and van Wijk, K. J. (2004) Analysis of curated and predicted plastid subproteomes of Arabidopsis. Subcellular compartmentalization leads to distinctive proteome properties. Plant Physiol 135, 723–734 69. Friso, G., Giacomelli, L., Ytterberg, A. J., Peltier, J. B., Rudella, A., Sun, Q., and Wijk, K. J. (2004) In-depth analysis of the thylakoid membrane proteome of Arabidopsis thaliana chloroplasts: new proteins, new functions, and a plastid proteome database. Plant Cell 16, 478–499 70. Kleffmann, T., Hirsch-Hoffmann, M., Gruissem, W., and Baginsky, S. (2006) plprot: a comprehensive proteome database for different plastid types. Plant Cell Physiol 47, 432–436 71. Heazlewood, J. L., Tonti-Filippini, J., Verboom, R. E., and Millar, A. H. (2005) Combining experimental and predicted datasets for determination of the subcellular location of proteins in Arabidopsis. Plant Physiol 139, 598–609 72. Heazlewood, J. L., Verboom, R. E., TontiFilippini, J., Small, I., and Millar, A. H. (2007) SUBA: the Arabidopsis subcellular database. Nucleic Acids Res 35, D213–D218 73. Granvogl, B., Reisinger, V., and Eichacker, L. A. (2006) Mapping the proteome of thylakoid membranes by de novo sequencing of intermembrane peptide domains. Proteomics 6, 3681–3695
82
Plöscher et al.
74. Ytterberg, A. J., Peltier, J. B., and van Wijk, K. J. (2006) Protein profiling of plastoglobules in chloroplasts and chromoplasts. A surprising site for differential accumulation of metabolic enzymes. Plant Physiol 140, 984–997 75. Aro, E. M., Rokka, A., and Vener, A. V. (2004) Determination of phosphoproteins in higher plant thylakoids. Methods Mol Biol 274, 271–285 76. Zhou, W., Eudes, F., and Laroche, A. (2006) Identification of differentially regulated proteins in response to a compatible interaction between the pathogen Fusarium graminearum and its host, Triticum aestivum. Proteomics 6, 4599–4609 77. Rolland, N., Ferro, M., Ephritikhine, G., Marmagne, A., Ramus, C., Brugiere, S., et al. (2006) A versatile method for deciphering plant membrane proteomes. J Exp Bot 57, 1579–1589 78. Steinmetz, L. M., Scharfe, C., Deutschbauer, A. M., Mokranjac, D., Herman, Z. S., Jones, T., et al..(2002) A systematic screen for human disease genes in yeast. Nat Genet 31, 400–404 79. Prokisch, H., Scharfe, C., Camp, D. G., Xiao, W., David, L., Andreoli, C., et al. (2004) Integrative analysis of the mitochondrial proteome in yeast. PLoS Biol 2, e160 80. Gray, M. W., Burger, G., and Lang, B. F. (1999) Mitochondrial evolution. Science 283, 1476–1481 81. Richly, E., Chinnery, P. F., and Leister, D. (2003) Evolutionary diversification of mitochondrial proteomes: implications for human disease. Trends Genet 19, 356–362 82. Foury, F., Roganti, T., Lecrenier, N., and Purnelle, B. (1998) The complete sequence of the mitochondrial genome of Saccharomyces cerevisiae. FEBS Lett 440, 325–331 83. Scharfe, C., Zaccaria, P., Hoertnagel, K., Jaksch, M., Klopstock, T., Dembowski, M., et-al. (2000) MITOP, the mitochondrial proteome database: update. Nucleic Acids Res 28, 155–158 84. Kumar, A., Agarwal, S., Heyman, J. A., Matson, S., Heidtman, M., Piccirillo, S., et al.
85.
86.
87.
88.
89.
90.
91.
92.
93.
94.
(2002) Subcellular localization of the yeast proteome. Genes Dev 16, 707–719 Taylor, S. W., Fahy, E., and Ghosh, S. S. (2003) Global organellar proteomics. Trends Biotechnol 21, 82–88 Nakai, K., and Horton, P. (1999) PSORT: a program for detecting sorting signals in proteins and predicting their subcellular localization. Trends Biochem Sci 24, 34–36 Pflieger, D., Le Caer, J. P., Lemaire, C., Bernard, B. A., Dujardin, G., and Rossier, J. (2002) Systematic identification of mitochondrial proteins by LC-MS/MS. Anal Chem 74, 2400–2406 Sickmann, A., Reinders, J., Wagner, Y., Joppich, C., Zahedi, R., Meyer, H. E., et-al. (2003) The proteome of Saccharomyces cerevisiae mitochondria. Proc Natl Acad Sci U S A 100, 13207–13212 Huh, W. K., Falvo, J. V., Gerke, L. C., Carroll, A. S., Howson, R. W., Weissman, J. S., and O’Shea, E. K. (2003) Global analysis of protein localization in budding yeast. Nature 425, 686–691 Millar, A. H., Heazlewood, J. L., Kristensen, B. K., Braun, H. P., and Moller, I. M. (2005) The plant mitochondrial proteome. Trends Plant Sci 10, 36–43 Millar, A. H., Sweetlove, L. J., Giege, P., and Leaver, C. J. (2001) Analysis of the Arabidopsis mitochondrial proteome. Plant Physiol 127, 1711–1727 Kruft, V., Eubel, H., Jansch, L., Werhahn, W., and Braun, H. P. (2001) Proteomic approach to identify novel mitochondrial proteins in Arabidopsis. Plant Physiol 127, 1694–1710 Taylor, S. W., Fahy, E., Zhang, B., Glenn, G. M., Warnock, D. E., Wiley, S., et al. (2003) Characterization of the human heart mitochondrial proteome. Nat Biotechnol 21, 281–286 Gaucher, S. P., Taylor, S. W., Fahy, E., Zhang, B., Warnock, D. E., Ghosh, S. S., and Gibson, B. W. (2004) Expanded coverage of the human heart mitochondrial proteome using multidimensional liquid chromatography coupled with tandem mass spectrometry. J Proteome Res 3, 495–505
Chapter 6 Applications of Chemical Tagging Approaches in Combination with 2DE and Mass Spectrometry Alexander Leitner and Wolfgang Lindner Summary Chemical modification reactions play an important role in various protocols for mass-spectrometry-based proteome analysis; this applies to both gel-based and gel-free proteomics workflows. In combination with two-dimensional gel electrophoresis (2DE), the addition of “tags” by means of chemical reactions serves several purposes. Potential benefits include increased sensitivity or sequence coverage for peptide mass fingerprinting and improved peptide fragmentation for de novo sequencing studies. Tagging strategies can also be used to obtain complementary quantitative information in addition to densitometry, and they may be employed for the study of post-translational modifications. In combination with the unique advantages of 2DE as a separation technique, such approaches provide a powerful toolbox for proteomic research. In this review, relevant examples from recent literature will be given to illustrate the capabilities of chemical tagging approaches, and methodological requirements will be discussed. Key words: Mass spectrometry, Chemical tagging, Protein identification, Peptide sequencing, Quantification, Post-translational modification, Review.
1. Introduction The combination of two-dimensional gel electrophoresis (2DE) with mass spectrometric (MS) analysis of digested protein spots has fueled the advance of proteomics research in the early 1990s (1–5). Novel ionization techniques for MS, matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI), made it possible for the first time to identify a considerable number of the hundreds or thousands of spots that can be separated and visualized on a 2DE gel. The routine application of
David Sheehan and Raymond Tyther (eds.), Methods in Molecular Biology, Two-Dimensional Electrophoresis Protocols, vol. 519 © Humana Press, a part of Springer Science + Business Media, LLC 2009 DOI: 10.1007/978-1-59745-281-6_6
83
84
Leitner and Lindner
MS quickly replaced the classic sequencing technique of Edman degradation. Today, both traditional gel-based techniques and the more recently developed “gel-free” (or “shotgun”) approaches are used in countless proteomic studies. Both strategies have pros and cons that appear in the introduction of most technology papers in the field, and both strategies have their advocates and opponents. However, it is frequently shown that both approaches have unique advantages and yield complementary results. In particular, the possible differentiation of isoforms or members of protein families with considerable sequence homology continues to be the strength of 2DE in combination with MS (6). It is clear that when one deals with highly complex protein mixtures of biological origin such as biofluids or cell lysates, efficient multidimensional separation strategies are required, and 2DE continues to offer the most comprehensive separation on the protein level. Its hyphenation to MS for protein identification and sequencing, although well established nowadays, still leaves room for improvement. In recent years, automated spot picking and sample processing (involving handling steps like destaining, in-gel digestion, desalting, and spotting onto MALDI targets) has been made available (7, 8). Other advances include the use of novel digestion technologies involving microwave irradiation (9) or ultrasound (10), potentially enabling higher sample throughput after in-gel separation. At the MS detection stage, many 2DE workflows still rely on peptide mass fingerprinting for protein identification, i.e., the identification of proteins based on the masses of the peptides resulting from (typically) enzymatic cleavage of the proteins. For this purpose, matrix-assisted laser desorption-time-of-flight (MALDI-TOF) MS combines ease of use and relatively low initial investment and running costs. However, peptide sequencing on these instruments can only be performed by post-source decay (PSD), the dissociation of metastable ions in the field-free region of the TOF analyzer. The quality of PSD spectra is usually not comparable to those obtained from the dissociation of peptide ions with gas molecules in the collision-induced dissociation (CID) process. Only more recently have “true” tandem MS-based analyses become more frequently applied in combination with 2DE-based proteomics. One possible approach is the use of TOF/TOF instrumentation that involves high-energy CID of peptide ions, yielding potentially information-rich, but also quite complex fragmentation patterns (11). In contrast to TOF/TOF MS which is usually carried out without any further separation of the protein digests, proteolytically generated peptides may also be separated by liquid chromatography prior to electrospray ionization-MS/ MS analysis. For this strategy, a number of different types of mass
Methods in Molecular Biology: Two-Dimensional Electrophoresis Protocols
85
spectrometers are employed such as ion traps, quadrupole-TOF instruments, etc. Figure 1 summarizes the most frequently used MS approaches. In all cases, the data that are generated need to be analyzed by bioinformatic methods (12, 13; see also Chapter “Database Interrogation Algorithms for Identification of Proteins in Proteomic Separations”). Usually, the list of peptide masses or the set of tandem MS spectra is compared to theoretical data obtained from protein sequence databases. Alternatively, and only if MS/ MS data of sufficiently high quality are available, results may be directly interpreted for de novo sequencing without referring to protein databases. Regardless of the exact MS approach being followed, it is always desirable to obtain optimum results. To achieve this, chemical reactions can be performed on peptides and proteins
Fig. 1. Common approaches for combining protein separation by 2DE and identification by MS.
86
Leitner and Lindner
at various stages of the analysis protocol to enhance the information content that can be derived from a sample. In the following sections, we give an overview of potential benefits of such “tagging” reactions in combination with 2DE and highlight relevant examples from the recent literature. A “tag” in this case refers to any functional group that is introduced (either on the protein or peptide level) to improve analysis by MS, be it by enhancing the ionization or fragmentation of the peptides, for quantification purposes or any other means. As we and others have summarized previously (14–18), the use of chemical tagging reactions is not restricted to either gel-free or gel-based platforms. In the context of this book, emphasis will however be given to those approaches that have been successfully applied together with 2DE as the separation platform.
2. Concepts and Potential Benefits of Chemical Tagging Approaches
Broadly, applications of chemical tagging reactions in combination with 2DE can be separated into three groups based on the type of information that is obtained (see Fig. 2): Protein identification, quantification, and characterization, the latter referring to the profiling of protein modifications in particular. For protein identification by MALDI peptide mass fingerprinting, it is of utmost importance to identify as many peptides from an in-gel digest as possible in order to achieve significant scores from database searches. However, it is well known that many peptides are not observed at all in a MALDI mass spectrum (19–21). This may be due to several reasons. For example, smaller peptides tend to be obscured by matrix-derived signals in the low mass range; however, they commonly do not provide significant information for database searches as short sequence stretches are rarely unique for a given protein sequence. Highly polar peptides may already be lost during sample clean-up, if a desalting step is performed. Very large peptides are recovered less efficiently from the gel matrix. Most importantly, sequence-specific effects result in vastly different signal abundances for peptides in the medium mass range (~800–3,000 Da) that usually provides most signals for protein identification. Frequently, there is a bias against tryptic peptides terminating with Lys compared to those with Arg as the C-terminal residue (19–21). Thus, several tagging strategies have been introduced that enhance the signal of Lys-peptides (see Subheading 4.1 for details). Other groups have observed an increase in the number of peptide-derived signals – and thus improved sequence coverage – upon introduction of additional hydrophobic groups by
Methods in Molecular Biology: Two-Dimensional Electrophoresis Protocols
87
Fig. 2. Overview of potential application fields for chemical tagging reactions.
different tagging chemistries, which is believed to result in a more efficient desorption/ionization process as well. Tags that can be introduced on various amino acid residues with high specificity may also be used to obtain amino acid composition information that improves database searching. Protein identification by post-source decay or CID MS/MS techniques relies on easily interpretable tandem mass spectra with complete fragment ion series. Sufficient data quality is important for automated database searches, but even more for de novo sequencing approaches where sequence stretches have to be read directly without being able to rely on existing database entries. Different modification chemistries (discussed in detail in Subheading 4.2) that enhance peptide fragmentation have been introduced since the 1990s and have demonstrated their usefulness in combination with 2DE. Gel-based quantification is a well-established technology that has developed from Coomassie stains to highly sensitive
88
Leitner and Lindner
fluorescent dyes and the DIGE technology (see Chapter “TwoDimensional Difference Gel Electrophoresis”) (22). However, some limitations still exist for densitometric approaches, particularly when proteins comigrate to the same position on the gel or changes in expression exceed the dynamic range of the staining procedure (see Chapter “Troubleshooting Image Analysis in 2DE”). Therefore, differential stable isotope labeling (SIL) techniques – which are frequently used for gel-free approaches (see 14–18 and references therein) – may also be used in combination with 2DE. The content of Subheading 4.3 highlights developments in this area and cites studies that have compared traditional gel-based quantification and SIL methodologies. Enrichment and depletion techniques are frequently used to enrich proteins of interest prior to 2DE. In general, these strategies allow profiling of less abundant proteins and therefore increase the dynamic range of 2DE-based analyses. For example, abundant plasma proteins such as albumin and immunoglobulins may be depleted by immunoaffinity chromatography (23, 24) and allow a higher loading of the remaining proteins. Affinity tags can also be introduced via chemical reactions so that a subpopulation of proteins is enriched from a biological sample (see Subheading 4.4). This is of particular importance for proteins carrying (substoichiometric) post-translational modifications or to detect low abundance proteins, e.g., in biomarker discovery.
3. Practical Requirements for Chemical Tagging Approaches
Several conditions have to be met so that a chemical reaction can be successfully employed for protein or peptide modifications in proteome analysis. These requirements will depend on the techniques that are utilized for separation and detection, and some may differ for gel-based and gel-free approaches (14, 18). In all cases, reaction conditions as well as the specificity and the quantitative nature of the reaction are of considerable importance. Many of the tagging reactions that are described in the following therefore rely on the modification of amino groups, either at the N-terminus of a peptide or at the side chain of Lys residues. There are a considerable number of reactions with sufficient specificity toward amines that may be performed and – with the exception of an N-terminally modified, Lys-free peptide – all peptides in a sample will be amenable to such a modification reaction. Sample complexity after in-gel digestion of a protein spot is not a problem. Therefore, methods that target other residues are less frequently used compared to gel-free approaches where they are used for affinity tagging purposes, for example.
Methods in Molecular Biology: Two-Dimensional Electrophoresis Protocols
89
In any experimental set-up, a less than quantitative conversion of the analytes will result in a more complex mixture. For gel-free strategies that include a digestion step of the total protein mixture prior to any downstream separation step, this can be considered more detrimental. However, also in 2DE-based workflows, remaining unreacted peptides or side-products from a tagging reaction complicate automated data analysis and may lead to lower or less significant scores. Methods that rely on in-gel modification reactions must be critically examined as diffusion of reagents into the gel typically results in slower reaction speeds. The occurrence of side reactions other than at the targeted residue also complicates the data analysis process and may prevent the use of filtering based on amino acid composition information. Some chemical reactions require quite drastic conditions (pH extremes, high temperatures) under which some functional groups or modifications in peptides or proteins may not be stable. This may lead to sample losses in the process. The same has to be considered when additional clean-up steps are required to remove excess reagents that would otherwise interfere with MS analysis. If the protein amount in a gel spot is very small, potential benefits of a tagging reaction might thus be offset by reduced recovery rates. Tags that are attached to proteins for the purpose of affinity purification steps prior to 2DE sometimes prevent identification of labeled regions in the protein due to unfavorable ionization/ fragmentation properties or shielding of digestion sites resulting in unexpectedly high numbers of missed cleavages.
4. Selected Examples from the Literature 4.1. Tagging to Enhance MS Sensitivity and Increase Sequence Coverage
In recent years, a number of tagging reactions have been proposed to improve sensitivity and protein sequence coverage from MS analyses, especially in the PMF mode. Among those, the guanidination of Lys residues is the most commonly used modification chemistry (see also Chapter “De Novo Sequence Analysis of N-Terminal Sulfonated Peptides After In-Gel Guanidination”). The reaction of the ε-amino group of Lys with O-methyl isourea (Fig. 3a) results in attachment of a strongly basic guanidino group to the side chain of Lys. The newly formed modified amino acid, homoarginine, differs only by an additional –CH2–group from Arg and possesses very similar physicochemical properties. Guanidination attempts to overcome the bias against Lyscontaining peptides compared to Arg-containing peptides when tryptic digests are analyzed by MALDI-MS (19, 20). Following the modification reaction, all peptides with the exception of
90
Leitner and Lindner
Fig. 3. Chemical tags to increase sensitivity/improve ionization for MS analysis: (a) Guanidination of Lys residues [25–31]; (b) imidazole-type Lys tag [34–38]; (c) coumarin tag [39–40], and (d) dansyl tag [42] as examples for hydrophobic tags attached to amino groups.
the C-terminal peptide will carry the guanidine group which – because of its higher basicity – facilitates ionization. Different labeling protocols have been described in the literature (see 25, 26), all of them require a relatively high solution pH and a sample clean-up step after the reaction because of the large reagent excess being used. Side reactions for peptides carrying Gly at the N-terminus have been observed under some conditions (26), and deamidation of Asn residues might also occur to a small extent (27). First applications in combination with 2DE have been described by Brancia et al. (25, 28), connecting the tagging reaction to an improved MS response and sequence coverage. Cockrill et al. have demonstrated on-target guanidination of in-gel and in-solution digests just prior to MALDI analysis (29), while Sergeant et al. introduced an in-gel guanidination protocol (30; see Chapter “De Novo Sequence Analysis of N-Terminal Sulfonated Peptides After In-Gel Guanidination”). Most recently, Gaskell and coworkers have employed guanidination-type tagging for the analysis of gel spots from the separation of cell lysates (31). In this work, samples were processed automatically by a liquid handling system, demonstrating the applicability of this derivatization protocol to high-throughput analysis. From a majority of the spots
Methods in Molecular Biology: Two-Dimensional Electrophoresis Protocols
91
that were analyzed, higher scores from database searches and/ or higher sequence coverage were also obtained in this study. In addition, 15N2-OMIU was used to enable relative quantification by differential isotope coding (see Subheading 4.3). Frequently, guanidination is also used for the specific modification of Lys amino groups so that only the N-terminal amino group in a peptide is available for further reactions. This has, for example, been used in combination with sulfonation chemistries (see Subheading 4.2) or differential isotope coding with aminereactive reagents for quantification purposes (32). Similar derivatization chemistry involves the amidination of amino groups by reagents such as S-methyl thioacetimidate (27, 33), although the application for gel-derived samples has not been reported up to now. Lys residues may also be modified with an imidazole-type tag originally introduced by Peters et al. (34). The reagent, 2-methoxy-4, 5-dihydro-1H-imidazole, attaches an ionizationenhancing moiety to the ε-amino group, similar to the guanidination reaction (Fig. 3b). The reagent was subsequently commercialized by Agilent Technologies, but has not found widespread use yet (35–38). Potential advantages include enhanced sensitivity, improved peptide fragmentation, and applicability for differential quantification approaches. As an alternative to the attachment of a more polar functional group, the introduction of hydrophobic moieties has also been found to increase the MS response. This is believed to be the result of improved cocrystallization with the MALDI matrix, although this effect is dependent on the preparation technique. For example, Karger and coworkers have used fluorescent coumarin tags to derivatize peptides (Fig. 3c; 39, 40) and have reported improved performance in MALDI-MS. Ullmer et al. used a fluorescent quinoline-type reagent for the same purpose (41). Along this line, Kim and coworkers have used dansylation to improve sequence coverage with similar effects (Fig. 3d; 42). For these tagging chemistries, however, efficient peptide fragmentation typically is impaired (40, 43) so that these tags cannot be used for MS/MS approaches in a straightforward manner. 4.2. Tagging to Improve Peptide Fragmentation and de Novo Sequencing
As mentioned previously, MALDI peptide mass fingerprinting is still the most frequently employed MS workflow in combination with 2DE. When carried out on instruments equipped with TOF analyzers, it is possible to perform peptide sequencing by PSD experiments, although the data quality is usually not comparable with collision-induced dissociation MS/MS spectra. Singly charged ions typically formed by MALDI have the additional disadvantage of a less favorable fragmentation when compared to multiply charged ions that are more commonly formed by electrospray ionization (44). Thus, there is a clear need for
92
Leitner and Lindner
methods to improve peptide fragmentation for MALDI-PSD applications, in particular with regard to de novo sequencing, i.e., the elucidation of (partial) sequence information directly from the spectra without referring to database searches. At the end of the 1990s, Keough and coworkers have demonstrated that sulfonation of the N-terminus of a peptide improves its fragmentation behavior, particularly for MALDI-PSD set-ups (45, 46). The attachment of a permanently negatively charged group on the N-terminus results in the observation of C-terminal y-type fragment ions exclusively. Ideally, the peptide sequence can be read from the PSD or CID-MS/MS spectra beginning from the N-terminus. Different sulfonation reagents have been explored for the reaction (45, 46), although 3-sulfopropionic acid N-hydroxysuccinimide (Fig. 4a) was found most promising as it may be applied in aqueous solution. This compound has been made commercially available by Amersham Biosciences (now GE Healthcare) under the name Ettan CAF MALDI Sequencing Kit. The CAF (chemically assisted fragmentation) concept has been applied in a number of recent studies by different groups. As an example for a study in which 2DE was employed, Samyn and coworkers applied sulfonation chemistry to identify proteins from Halorhodospira halophila, an extremophilic eubacterium whose genome has not yet been sequenced, by MALDI-TOF/ TOF-based de novo sequencing (47). The same group also was able to analyze proteins from the banana plant by homologybased searching following sulfonation (48). A potential disadvantage of sulfonation is reduced sensitivity in positive MS mode as a result of the negative charge in the tag. It is therefore useful to bloc