BIOTECHNOLOGY INTELLIGENCE UNIT
Biotechnology Intelligence Unit Medical Intelligence Unit Molecular Biology Intelligenc...
83 downloads
847 Views
2MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
BIOTECHNOLOGY INTELLIGENCE UNIT
Biotechnology Intelligence Unit Medical Intelligence Unit Molecular Biology Intelligence Unit Neuroscience Intelligence Unit Tissue Engineering Intelligence Unit
The chapters in this book, as well as the chapters of all of the five Intelligence Unit series, are available at our website.
BIU 2
Tracking Genetically-Engineered Microorganisms
• The chapters comprise a comprehensive bioscience and biomedical Report database. • Reports (chapters) from this book and all Intelligence Unit books are updated annually so information at the website is current. • Many Reports are linked to brief, animated depictions of molecular mechanisms described in the text. These so-called "Biotoons" can be viewed at the site. • Access to eurekah.com is unrestricted and free of charge.
JANSSON • VAN ELSAS • BAILEY
INTELLIGENCE UNITS
BIOTECHNOLOGY INTELLIGENCE UNIT
2
Janet K. Jansson • Jan Dirk van Elsas • Mark J. Bailey
Tracking Genetically-Engineered Microorganisms
BIOTECHNOLOGY INTELLIGENCE UNIT 2
Tracking Genetically-Engineered Microorganisms Janet K. Jansson Department of Biochemistry Stockholm University Stockholm, Sweden
Jan Dirk van Elsas Research Institute for Plant Protection Wageningen, The Netherlands
Mark J. Bailey National Environment Research Council Oxford, U.K.
LANDES BIOSCIENCE GEORGETOWN, TEXAS U.S.A.
EUREKAH.COM AUSTIN, TEXAS U.S.A.
TRACKING GENETICALLY-ENGINEERED MICROORGANISMS Biotechnology Intelligence Unit EUREKAH.COM LANDES BIOSCIENCE Designed by Judith Kemper Copyright ©2000 EUREKAH.COM All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher. Printed in the U.S.A. Please address all inquiries to the Publishers: EUREKAH.COM / Landes Bioscience, 810 South Church Street Georgetown, Texas, U.S.A. 78626 Phone: 512/ 863 7762; FAX: 512/ 863 0081 www.landesbioscience.com www.EUREKAH.COM
ISBN: 1-58706-009-4
Library of Congress Cataloging-in-Publication Data
Tracking genetically-engineered microorganisms / Janet K. Jansson, J.D. van Elsas, Mark J. Bailey. p.cm -- (Biotechnology intelligence unit) Includes bibliographical references and index. ISBN 1-58706-009-4 (alk. paper) I. Recombinant microorganisms -- Ecology. 2. Recombinant microorganisms -- Identification. I. Jansson, Janet K. II. Elsas, J.D. van (Jan D.), 1951- III. Bailey, Mark J. IV. Series. QR 100.T73 2000 660.6'5--dc21
99-056991
CONTENTS 1. Problems in Detecting Dormant (VBNC) Cells, and the Role of DNA Elements in This Response ......................................................... 1 James D. Oliver 1.1. The Viable but Nonculturable State ............................................. 1 1.2. Assays Used to Determine Viability .............................................. 2 1.3. Characteristics of Cells in the VBNC State ................................... 3 1.4. Inducing Factors ............................................................................ 4 1.5. Bacteria Known to Enter the VBNC State .................................... 5 1.6. Resuscitation from the VBNC State .............................................. 5 1.7. In situ Evidence of the VBNC Response ....................................... 7 1.8. Use of PCR to Detect Cells in the VBNC State ............................ 9 1.9. Effect of Plasmids on Entry into the VBNC State ........................ 9 1.10. Significance of the VBNC State in the Release of Genetically Modified Bacteria ................................................. 12 1.11. Conclusion ................................................................................... 13 2. The Use of Antibiotic Resistance Gene Markers for Studying Bacterial Populations in Natural Environments ............. 17 Sharon Egan and Elizabeth M.H. Wellington 2.1. Introduction ................................................................................. 17 2.2. Cultivation Based Assays ............................................................. 18 2.3. Direct Molecular Monitoring Methods ...................................... 20 2.4. Choice of Antibiotic Resistance Gene Markers .......................... 20 2.5. Cross-Resistance .......................................................................... 21 2.6. Marking of Bacteria with Antibiotic Resistance Genes .............. 21 2.7. Use of Antibiotic Resistance Genes to Monitor Gene Transfer in Soil ................................................ 22 2.8. Ethical Concerns .......................................................................... 23 2.9. Conclusion ................................................................................... 24 3. Extraction and Analysis of Microbial Community Nucleic Acids from Environmental Matrices ................................................................ 29 Jan Dirk van Elsas, Kornelia Smalla and Christoph C. Tebbe 3.1. Introduction ................................................................................. 29 3.2. Extraction of Microbial Cells from Environmental Matrices .... 33 3.3. Cell Disruption ............................................................................. 35 3.4. Extraction and Purification of DNA ........................................... 36 3.5. Analysis of DNA and Detection of Specific Sequences .............. 38 3.6. Extraction and Purification of RNA ........................................... 39 3.7. Detection of RNA ......................................................................... 40 3.8. Quantification of Specific Targets in Environmental Nucleic Acids ................................................. 42 3.9. Conclusion ................................................................................... 44
4. Detection of Bacteria by Their Intrinsic Markers ................................. 53 Éva Tas and Kristina Lindström 4.1. Introduction ................................................................................. 53 4.2. Brief Description of PCR-Based Fingerprinting Methods ......... 54 4.3. Development of Specific Hybridization Probes and PCR Primers .......................................................................... 54 4.4. Case Study: Specific Detection of Rhizobium galegae ................ 56 4.5. Future Prospects .......................................................................... 61 4.6. Conclusion ................................................................................... 63 5. Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology ......................................... 69 James I. Prosser, Antonio J. Palomares, Matti T. Karp, Philip J. Hill 5.1. Introduction ................................................................................. 69 5.2. Lux-Based Systems ....................................................................... 69 5.3. Luc-Based Systems ....................................................................... 72 5.4. Methodology ................................................................................ 74 5.5. Applications ................................................................................. 76 5.7. Conclusion ................................................................................... 82 6. The Use of the GUS Reporter System to Study Molecular Aspects of Interactions Between Bacteria and Plants ......................................... 87 M. Lambrecht, A. Vande Broek and Jos Vanderleyden 6.1. Introduction ................................................................................. 87 6.2. The Escherichia coli gusA gene ..................................................... 88 6.3. The GUS Reporter system ........................................................... 89 6.4. Application of the GUS Reporter System in Studies of Plant-Bacterium Interactions ................................ 93 6.5. Conclusion ................................................................................... 97 7. Using Green Fluorescent Protein (GFP) as a Biomarker or Bioreporter for Bacteria ......................................... 101 J. R. Stoltzfus, Janet K. Jansson and Frans J. de Bruijn 7.1. Introduction ............................................................................... 101 7.2. Properties of Wild-type GFP ..................................................... 101 7.3. Improving GFP Fluorescence .................................................... 102 7.4. Detection of GFP ....................................................................... 104 7.5. GFP as a Biomarker in Bacteria ................................................. 105 7.6. GFP as a Bioreporter in Bacteria ............................................... 111 7.7. Conclusion ................................................................................. 112
8. Monitoring Persistence and Risk Assessment Following the Field Release of Pseudomonas fluorescens SBW25EeZY6KX ........ 117 Mark J. Bailey, Tracey M. Timms-Wilson, Richard J. Ellis, Ian P. Thompson and Andrew K. Lilley 8.1. Introduction ............................................................................... 117 8.2. Construction of P. fluorescens SBW25EeZY6KX and Detection and Monitoring Methods ................................. 118 8.3. Case Study of the Persistence of P. fluorescens SBW25EeZY6KX in Sugar Beet Crops ........... 118 8.4. Survival of Recombinant in Bulk Soil under Glasshouse Conditions ................................................... 119 8.5. Field Sites, Treatment and Sampling of Plants and Soil .......... 120 8.6. Survival of GMM on Over-Wintering Sugar Beet Secondary Growth, Resown Crop Plants and Volunteer Weeds ............... 120 8.7. Would Persistence of a Modified Indigenous Strain in the Soil Environment Pose a Threat? .................................... 122 8.8. Conclusion ................................................................................. 123 9. Use of luc-Tagged Genetically Modified Microorganisms (GMMs) to Study Rhizobial Ecology in Soil Columns, Field Lysimeters and Field Plots ........................................................... 127 Christoph C. Tebbe 9.1. Introduction ............................................................................... 127 9.2. Construction and Properties of GMM Strains L1 and L33 ..... 128 9.3. Experimental Design: What Can Be Achieved with Each System? ...................................................................... 129 9.4. Techniques and Consequences of GMM Soil Inoculations ..... 132 9.5. Survival and Spread of GMMs in Soil Columns, Field Lysimeters and Field Plots ................................................ 133 9.6. Conclusion ................................................................................. 135 10. The Field Release and Monitoring of Rhizobial Strains Marked with lacZ and Mercury Resistance Genes ............................................ 139 Viviana Corich, Alessio Giacomini, Elena Vendramin, Patrizia Vian, Milena Carlot, Andrea Squartini and Marco P. Nuti 10.1. Introduction ............................................................................... 139 10.2. Designing the Markers ............................................................... 139 10.3. Construction of GMM Strains 1110, 1111 and 1112 ............... 140 10.4. Microcosm Studies of GMMs ................................................... 140 10.5. Field Trial I; Fate and Impact of an Allochtonous GMM ........ 141 10.6. Field Trial II; Fate and Impact of a GMM Native to the Site .................................................................................... 143 10.7. Conclusion ................................................................................. 144
11. The Field Release and Monitoring of GUS-Marked Rhizobial Strain CT0370 ........................................... 145 Penny R. Hirsch, Tom A. Mendum, Alfred Pühler and Werner Selbitschka 11.1. Introduction .............................................................................. 145 11.2. Construction of GMM Strain CT0370 .................................... 145 11.3. Detection of Strains CT0370 and RSM2004 ........................... 146 11.4. Inoculant Preparation .............................................................. 147 11.5. Field Release .............................................................................. 147 11.6. Screening for pSym Acquisition by CT0370 in the Field ....... 148 11.7. Plasmid Transfer from RSM2004 to CT0370 .......................... 148 11.8. Conclusion ................................................................................ 149 12. Regulatory Aspects ................................................................................ 153 Kersti Gustafsson 12.1. Introduction .............................................................................. 153 12.2. Historical Aspects of the Regulation of Deliberate Releases of GMOs ............................................... 153 12.3. The European Union and the European Free Trade Association .............................. 155 12.4. Canada ....................................................................................... 156 12.5. Switzerland ................................................................................ 157 12.6. United States ............................................................................. 157 12.7. Risk Assessment ........................................................................ 158 12.8. Concern about the Insertion of Genes Coding for Antibiotic Resistance .......................................................... 159 12.9. Concern about the Insertion of Genes Coding for Mercury Resistance ............................................................. 159 12.10. Concern on the Use of Hazardous Chemicals in Connection with the Deliberate Release of a GMM ........... 159 12.11. Ethical Aspects .......................................................................... 160 12.12. Information on Field Releases and Products .......................... 160 Index ....................................................................................................... 163
EDITORS Janet K. Jansson Department of Biochemistry Stockholm University Stockholm, Sweden Chapter 7 Jan Dirk van Elsas Research Institute for Plant Protection Wageningen, The Netherlands Chapter 3 Mark J. Bailey National Environment Research Council Institute of Virology and Environmental Microbiology Oxford, U.K. Chapter 8
CONTRIBUTORS A. Vande Broek F.A. Janssens Laboratory of Genetics Kardinaal Mercierlaan 92 Heverlee, Belgium Chapter 6
Sharon Egan Department of Biological Sciences University of Warwick Coventry, U.K. Chapter 2
F.J. de Bruijn MSU-DOE Plant Research Laboratory Department of Microbiology NSF Center for Microbial Ecology Michigan State University East Lansing, Michigan, U.S.A. Chapter 7
R.J. Ellis Molecular Microbial Ecology Laboratory NERC, Institute of Virology and Environmental Microbiology Oxford, U.K. Chapter 8
Milena Carlot Dipartimento di Biotecnologie Agrarie Università di Padova Legnaro, Italy Chapter 10
Alessio Giacomini Dipartimento di Biotecnologie Agrarie Università di Padova Legnaro, Italy Chapter 10
Viviana Corich Dipartimento di Biotecnologie Agrarie Università di Padova Legnaro, Italy Chapter 10
Kersti Gustafsson Microbiologist/Ecotoxicologist National Chemicals Inspectorate Solna, Sweden Chapter 12
Philip J. Hill School of Biological Sciences University of Nottingham Sutton Bonington Campus Sutton Bonington, Leicestershire, U.K. Chapter 5
Marco P. Nuti Dipartimento di Chimicae Biotecnologie Agrarie Università di Pisa Pisa, Italy Chapter 10
Penny R. Hirsch Soil Science Department IACR-Rothamsted Harpenden, U.K. Chapter 11
James D. Oliver Professor of Biology Director, Interdisciplinary Biotechnology Program University of North Carolina Charlotte, North Carolina, U.S.A. Chapter 1
Matti T. Karp Department of Biotechnology University of Turku Tykistokatu Turku, Finland Chapter 5 M. Lambrecht F.A. Janssens Laboratory of Genetics Kardinaal Mercierlaan 92 Heverlee, Belgium Chapter 6 A.K. Lilley Molecular Microbial Ecology Laboratory NERC, Institute of Virology and Environmental Microbiology Oxford, U.K. Chapter 8 Kristina Lindström Department of Applied Chemistry and Microbiology Division of Microbiology Viikki Biocenter University of Helsinki Helsinki, Finland Chapter 4 Tom A. Mendum Soil Science Department IACR-Rothamsted Harpenden, U.K. Chapter 11
Antonio J. Palomares Departamento de Microbiologia y Parasitologia Universidad de Sevilla Sevilla, Spain Chapter 5 James I. Prosser Department of Molecular and Cell Biology University of Aberdeen Institute of Medical Sciences, Foresterhill Aberdeen, Scotland Chapter 5 Alfred Pühler Department of Genetics University of Bielefeld Bielefeld, Germany Chapter 11 Werner Selbitschka Department of Genetics University of Bielefeld Bielefeld, Germany Chapter 11
Kornelia Smalla Institut fuer Biochemie und Pflanzenvirologie, Biologische Bundesanstalt Braunschweig, Germany Chapter 3 Andrea Squartini Dipartimento di Biotecnologie Agrarie Università di Padova Legnaro, Italy Chapter 10 J.R. Stoltzfus MSU-DOE Plant Research Laboratory Department of Microbiology NSF Center for Microbial Ecology Michigan State University East Lansing, Michigan, U.S.A. Chapter 7 Éva Tas Department of Biosciences Division of Genetics Viikki Biocenter University of Helsinki Helsinki, Finland Chapter 4 Christoph C. Tebbe Institut fuer Agraröecologie, FAL Braunschweig, Germany Chapters 3, 9 Ian P. Thompson Molecular Microbial Ecology Laboratory NERC, Institute of Virology and Environmental Microbiology Oxford, U.K. Chapter 8
Jos Vanderleyden F.A. Janssens Laboratory of Genetics Kardinaal Mercierlaan 92 Heverlee, Belgium Chapter 6 Elena Vendramin Dipartimento di Biotecnologie Agrarie Università di Padova Legnaro, Italy Chapter 10 Patrizia Vian Dipartimento di Biotecnologie Agrarie Università di Padova Legnaro, Italy Chapter 10 Elizabeth M.H. Wellington Department of Biological Sciences University of Warwick Coventry, U.K. Chapter 2 Tracey M. Timms-Wilson Molecular Microbial Ecology Laboratory NERC, Institute of Virology and Environmental Microbiology Oxford, U.K. Chapter 8
PREFACE
E
nvironmental microbiology is currently one of the most rapidly expanding areas of scientific research. Impetus for advanced investigations has been provided by the development and application of molecular techniques that facilitate the identification, characterization and monitoring of microbes. These advances now allow detailed investigations, developed in the laboratory, to be undertaken in the natural environment. Such studies confirm the remarkable biological diversity represented by microorganisms from their basic genetic structure to the regulated communications that occur within and between communities contributing to ecosystem function. However, while it is apparent that microorganisms constitute the greater part of the planet’s biomass, and are central in maintaining the biosphere, we remain essentially ignorant of a great majority of the functions or processes they undertake. One of the limiting factors in the study of their ecology, even within communities or populations, is that of scale. For instance, for soil it is very hard to assess microbes and their activities at the level of each individual pore where microbial soil inhabitants occur. Highly sensitive and specific tools are, thus, required for such detailed investigations. However, there is a paradox. Until a greater knowledge of the genetic and metabolic diversity within the microbial environment is obtained it remains difficult to investigate these complex communities or design relevant experiments that target the role of individuals or specific genes and their products. This situation is currently changing at an ever increasing rate. In this volume we have attempted to bring together a series of reviews of the approaches taken to study the ecology and functional activity of individual microbial cells and populations in environmental habitats, with a special focus on the use of marker/reporter genes for monitoring release strains. Traditionally, microbial ecology has been limited to studies of microbial processes, such as cycling of nitrogen or carbon, occurring by uncharacterized species in a “black box” scenario. For example, denitrification, nitrification and nitrogen fixation processes have been assessed by analyzing the specific nitrogen forms appearing as a result of these processes. On the other hand, the study of particular taxa was limited to those for which suitable cultivation methods and laboratory growth media had been devised. However, we now know that the majority of microorganisms in nature are not capable of growing on the available media under standard laboratory conditions. Moreover, in some instances bacteria, that have been successfully cultivated in the laboratory, may lose the ability to grow on laboratory media after introduction into the environment, presumably as a result of a stress response. These bacteria may still be viable or metabolically active in the environment and this apparently recalcitrant state must be considered when these organisms are studied. The
ability to persist and form a “resting stage” may be ecologically significant in niche exploitation. The phenomenon of viable but non-culturable (VBNC), as described for Vibrio spp, is discussed in Chapter 1. In the 1980s the need to identify and track specific microorganisms in environmental samples was highlighted by the requirement for risk assessment of genetically modified microorganisms (GMMs) that were to be deliberately released into natural settings. The current status of regulatory requirements for GMMs is discussed in Chapter 12. For risk assessment of GMMs it is no longer possible to rely purely on traditional monitoring methods since the specific GMM has to be distinguished from its parent, or wild type, strain that could also inhabit the same ecosystem. Based on the requirement for specific monitoring methods, a variety of molecular tools have been developed to unambiguously track GMMs in the environment. These tools and examples of their applications for tracking GMMs in field studies are described in this book. The molecular tools range from nucleic acid-based monitoring methods (Chapter 3) to the use of marker genes (biomarkers) with distinct phenotypes that serve as tags for identification of specific microbes in the laboratory (Chapters 5-7) and in the natural environment (Chapters 8-11). Following the established method of isolating defined strains using selective bacteriological media, nucleic acid-based molecular tools were the first to be applied for the purpose of directly tracking GMMs in environmental samples. This methodology was dependent on the ability to isolate nucleic acids from the environment, and a series of methods were developed for the extraction of DNA and more recently RNA, from complex matrices such as soil. These methods have been continually refined since the first published examples (reviewed in Chapter 3). As the technology improves, further optimizations in sensitivity and specificity can be expected. A variety of nucleic acid extraction methods were originally optimized for the different environmental sample types under analysis. These extraction and analytical methods have now been simplified and applied as essentially standard protocols for tracking GMMs in any environment. In particular, the application of polymerase chain reaction amplification (PCR) has revolutionized nucleic acid-based tracking methods by substantially increasing the sensitivity of detection over nucleic acid hybridization methods (Chapter 3). A biomarker can be defined as a DNA sequence, introduced into an organism, which confers a distinct genotype or phenotype to enable monitoring in a given environment. In some cases, an intrinsic marker is sufficient for monitoring a particular bacterial species. An intrinsic marker is a nonintroduced DNA sequence or a natural genotype that serves as a signature for a particular organism or group of organisms. Intrinsic markers are further described in Chapters 2 and 4. Chapter 2 discusses antibiotic resistance as a special type of intrinsic marker. Usually, intrinsic markers are not sufficiently specific for tracking of GMMs, since they are also present in the parent, or “wild-type”, strain, or they may be prevalent in the environment under study. For some applications, a reporter gene (bioreporter) can be used. A bioreporter is a gene encoding an easily detectable phenotype that can be used to measure gene expression when
fused to appropriate promoter target sequences. The choice of biomarker or bioreporter depends on the particular strain, the environment studied and the questions to be addressed. Several of the most promising monitoring methods and examples of their application are described in detail in Chapters 5-7 of this book. In Chapters 8-11, examples are given of the use of these biomarkers to track specific GMMs after release during field trial experiments. Chapter 12 outlines regulatory considerations for risk assessment of GMMs before field release. Figure 1 gives a schematic overview of the use of biomarkers/bioreporters in GMM releases. The use of any type of marker/reporter is seen by many as being essential in assessing the environmental fate of release organisms. Each chapter of this book is authored by at least one participant of the MAREP Concerted Action of Scientists. MAREP is an acronym for “Marker/ Reporter genes in Microbial Ecology” and is comprised of 26 scientists from 11 different countries. The MAREP Concerted Action is funded by the European Commission, Directorate-General XII, and addresses issues related to the use of marker and reporter genes in microbial ecology research. This is of particular importance in relation to the precise monitoring of GMM presence, persistence and metabolic activity in the environment. More information about the MAREP Concerted Action can be found in the following Web site: http://www.biokemi.su.se/marep/marep.html.
We intend this book to be of relevance for all those concerned with studies of the environmental fate of genetically modified or unmodified microorganisms. In particular, this volume will be of value to researchers developing organisms intended for release, and to representatives of regulatory agencies concerned with guiding experimental or commercial applications. This volume provides an up-to-date collection of data on the development, use and assessment of biomarkers and bioreporters for the study of bacterial function in the natural environment. We would like to extend our thanks to all the authors for providing the necessary text for this publication, and for the patience and understanding they have shown during the editing process. We would also like to thank the editorial staff for their support. Janet K. Jansson Jan Dirk van Elsas Mark J. Bailey
CHAPTER 1
Problems in Detecting Dormant (VBNC) Cells, and the Role of DNA Elements in This Response James D. Oliver
1.1. The Viable but Nonculturable State
M
icrobial ecologists have long recognized that large proportions of microbial populations inhabiting natural habitats appear to be nonculturable. Indeed, plate counts of bacteria in soil, rivers and oceans typically indicate that far less than 1% of the total bacteria observed by direct microscopic examination can be grown on culture media. It has also long been known that certain portions of bacterial populations in natural environments seem to “disappear” during certain seasons, only to “reappear” at other times. We now understand that at least part of the explanation for these observations is not due to seasonal die-off of the cells, but to their entry into what is most commonly called the “viable but nonculturable” state.1 A bacterial cell in the viable but nonculturable (VBNC) state may be defined as one which fails to grow on the routine bacteriological media on which it would normally grow and develop into a colony, but which is in fact alive and metabolically active. Bacteria enter into this “dormant” state in response to one or more environmental stresses which might otherwise be ultimately lethal to the cell. Thus, the VBNC state should be considered a means of cell survival. Eventually, when the inducing stress is removed, these cells are able to emerge from the VBNC state, and again become culturable on routine media. The typical VBNC response is illustrated in Figure 1.1, which shows the response of the human pathogen, V. vulnificus, to exposure to low temperature (5˚C). Such a temperature is below that at which this aquatic bacterium can grow and, if it were not for the VBNC response, is a temperature which would eventually lead to death of the population. As is evident from Figure 1.1, cells lose their ability to be cultured (shown by the open squares) in a rather linear manner, eventually reaching a point where platings suggest a total lack of any living cells. However, whereas death of a bacterial population generally leads to lysis of the cells and loss of cell structure, direct examination of cells entering the VBNC state indicates that the cells remain intact (as shown by the open circles of Fig. 1.1). Such cells could, of course, have died, but simply not undergone lysis. The primary evidence that such cells are alive, even if nonculturable, is from data obtained when one of the “direct viability” assays is applied to such cultures. These assays (described below) allow the direct
Tracking Genetically-Engineered Microorganisms, edited by Janet K. Jansson, Jan Dirk van Elsas, Mark J. Bailey. ©2000 EUREKAH.COM.
2
Tracking Genetically-Engineered Microorganisms
Fig. 1.1. Entry of V. vulnificus into the VBNC state in an artificial sea water microcosm at 5oC. Shown are plate counts (❏) on HI agar in cfu/ml, total cell counts (◆) by the acridine orange staining method, and direct viable counts (❍) by the substrate responsive method using yeast extract and nalidixic acid. Reprinted with permission from: Whitesides MD, Oliver JD. Appl Environ Microbiol 1997; 63:1002-1005.
determination of the viability of individual cells in a population, without the need for culture. As seen in Figure 1.1 (open circles), such assays often indicate that a large proportion of the apparently dead population is indeed alive.
1.2. Assays Used to Determine Viability Several techniques now exist for demonstrating that a cell is viable without requiring growth in or on a bacterial medium. These fall roughly into two categories: those which demonstrate an active electron transport chain, and those which demonstrate the ability of cells in the VBNC state to undergo limited growth, if not cellular division. In the former, the most common indicators are reduction of INT (p-iodonitrotetrazolium violet) or of CTC (5-cyano-2,3-ditolyl tetrazolium chloride). INT is an electron acceptor which diverts electrons from an active electron transport chain, thus becoming reduced to INT-formazan. Whereas INT is soluble and colorless, INT-formazan is insoluble and has a purple to black color. Thus, a cell which is undergoing metabolism using an electron transport chain (and therefore presumably is viable) will reduce INT to INT-formazan. Because the electron transport chain is in the bacterial inner membrane, this reduction leads to the development of dark spots in the membrane, representing sites of precipitation of the INT-formazan. These spots are readily detected using the light microscope. Through a similar action, reduction converts CTC to CTC-formazan, which fluoresces when irradiated by ultraviolet light. The result is red-fluorescent cells which are readily detected and differentiated
Detection of VBNC Cells
3
from non-fluorescing (and presumably non-viable) cells by epifluorescent microscopy. Both methods are described in Oliver.1 The most common method, originally developed by Kogure et al,2 for demonstrating viability other than through an active electron transport chain is that involving the addition to VBNC cells of small amounts of nutrient, usually in the form of yeast extract, along with nalidixic acid, an inhibitor of cell septation. Cells which are viable and nutrient responsive metabolize the yeast extract, and begin to elongate. The antibiotic prevents their cell division, however, resulting in elongated cells (Fig. 1.2). Such cells, which clearly are viable, are easily distinguished from nonviable, and therefore non-elongated, cells.1 Luminescence-based detection methods3,4 and flow cytometry5 may prove of great value in detecting the activity of cells as they enter into, and resuscitate from, the VBNC state. Other technologies, such as the use of fluorescently-tagged polyclonal or monoclonal antibodies6 are also essential for the detection of VBNC cells in the environment.
1.3. Characteristics of Cells in the VBNC State Cells entering the VBNC state generally undergo a reduction in size. In the case of V. vulnificus, for example, whereas log phase (actively growing) cells might be 3 mm long, those in the VBNC state are typically 0.6 µm in diameter. During this size reduction, significant changes in membrane structure, protein composition, ribosomal content, and possibly even DNA arrangement are experienced. Again using V. vulnificus as an example,1 we have found rapid and dramatic decreases in the levels of synthesis of DNA, RNA, and protein when these cells are exposed to a temperature downshift to 5˚C (Fig. 1.3). However, such decreases do not mean that all synthesis has ceased. Indeed, protein synthesis appears to be essential for entry into this state, and under these conditions V. vulnificus produces some 40 new proteins not seen during growth at “normal” temperatures.7 At the same time, dramatic changes in membrane fatty acid composition,8 and decreases in nutrient transport and respiration rates have generally been reported to occur as cells enter this dormant state.
Fig. 1.2. Elongation of viable cells following addition of yeast extract and nalidixic acid by the method of Kogure et al.2 Nonviable cells remain as small, coccoid cells.
4
Tracking Genetically-Engineered Microorganisms
Fig. 1.3. Macromolecular synthesis in V. vulnificus during entry into the VBNC state at 5˚C. Cells were assayed for protein (■ ), DNA (❏ ), and RNA (◆) synthesis. Reprinted with permission from: Oliver JD. In: Kjelleberg S, ed. Starvation in Bacteria. New York: Plenum Press 1993:239-272.
Cell wall synthesis, or at least metabolism of the constituents of these structures, also apparently continues, as addition of penicillin (an inhibitor of cell wall synthesis) to VBNC cells has generally been observed to result in rapid cell death.1 Most studies have observed that, if a cell entering the VBNC state harbors plasmids (extrachromosomal DNA elements which are able to control a variety of generally nonessential cell functions), then these plasmids are retained. This finding may prove to be highly relevant to the VBNC state of genetically modified cells released to the environment, as will be discussed later in this chapter. In contrast, it is becoming increasingly apparent that (possibly even major) changes in the cells’ chromosomal DNA may be occurring as cells enter the VBNC state.1 This aspect may also be critical to release studies, as these changes bring into question the ability to employ such powerful molecular techniques as the polymerase chain reaction (PCR) to detect these otherwise undetectable cells. This concern is also dealt with later in this chapter.
1.4. Inducing Factors Different bacteria are known to enter the VBNC state in response to different factors, all of which a cell would normally encounter in natural environments. These include such stresses as elevated or reduced temperature, elevated or reduced osmotic (e.g., salt) concentrations, nutrient starvation, levels of oxygen, and even certain intensities of light.1 In all cases, the inducers of the VBNC state appear to be environmental factors which are potentially injurious to a given bacterial species. For example, while entry into the VBNC state by V. vulnificus (optimum temperature of 37˚C) is induced by low (< 10˚C) temperature incubation,9 the reverse is true for Pseudomonas fluorescens. One strain of this bacterium, which prefers low temperatures, enters the VBNC state at 37˚C.10
Detection of VBNC Cells
5
The time required for cells to enter the VBNC state varies markedly with the bacterium and the inducing conditions. Reports of months being required are not uncommon, while others have reported days for the same bacteria. In general, times of a few days to a month seem typical. One factor which has been shown to have a dramatic effect on the time required for lab-grown cells to become nonculturable is the “age” of the cells. We have shown that, whereas V. vulnificus cells from the logarithmic phase of growth generally require less than 10 days to become completely nonculturable at 5˚C, those taken from the stationary phase require over a month. Indeed, a direct correlation between time required to become nonculturable and the age of the population has been demonstrated.11
1.5. Bacteria Known to Enter the VBNC State At least 30 species contained in16 genera of mostly gram-negative bacteria have been demonstrated to enter the VBNC state12 (Table 1.1). That such a variety of bacterial genera demonstrate this response suggests that it represents a wide-spread physiological response to adverse environments designed to allow the cell to survive potentially lethal environmental stresses. Whether this stress response provides cross protection against other stresses has not been reported.
1.6. Resuscitation from the VBNC State For the VBNC response to represent a true survival response it must be possible for the cells to exit this dormant state and return to a fully active and culturable state. Such a reversal in physiology is termed resuscitation, and often is triggered simply by the removal of the stress which initially induced the VBNC response. In V. vulnificus, for example, exit from the low temperature-induced VBNC state is triggered by a temperature upshift (e.g., from 5˚C to room temperature). After such a shift, culturable cells rapidly (typically within 8 hours) begin to appear, and population levels approximately equaling the original levels are generally observed within 12-24 hours (Fig. 1.4). During this time, the small coccoid cells which result as the cells enter the VBNC state are replaced by rods typical in size for V. vulnificus.13
Table 1.1. Bacteria described to enter the VBNC state Aeromonas salmonicida Agrobacterium tumefaciens Campylobacter jejuni Enterobacter aerogenes Enterococcus faecalis Escherichia coli (including EHEC strains) Helicobacter pylori Klebsiella pneumoniae Lactobacillus plantarum Legionella pneumophila Micrococcus luteus M. varians Pasteurella piscida Pseudomonas aeruginosa P. fluorescens P. putida P. syringae
Salmonella enteritidis S. typhimurium Shigella dysenteriae S. flexneri S. sonnei Vibrio anguillarum V. campbellii V. cholerae V. fischeri V. harveyi V. mimicus V. natriegens V. parahaemolyticus V. proteolytica V. vulnificus (biotypes 1 and 2)
6
Tracking Genetically-Engineered Microorganisms
Fig. 1.4. Changes in culturable cell (plate) counts and cell morphology during temperature downshift to 5˚C and subsequent resuscitation of the nonculturable cells by incubation at ca. 22˚C. Reprinted with permission from: Nilsson L et al. J Bacteriol 1991; 173:5054-5059.
While entry into a VBNC state has been described by many researchers and for many different bacterial species, demonstrating resuscitation for these cells has not always been a simple matter. Indeed, while some bacteria like V. vulnificus can be resuscitated by a simple reversal of the inducing stress, in others it has been quite difficult to show. We now realize that resuscitation may be an extremely complex event, one which may be quite difficult to demonstrate in the lab. In the case of L. pneumophila, simple addition of nutrients to the cells (which enter the VBNC state in response to nutrient deprivation) does not reverse the dormancy. It was found, however, that the addition of certain amoebae, which are natural hosts to this bacterium in the aquatic environment, does allow resuscitation of this causative agent of Legionnaire’s disease.14 Other problems also exist in demonstrating resuscitation from the VBNC state. It has been difficult to overcome the argument that what was being observed in the name of “resuscitation” was, in fact, regrowth of a few culturable cells which had escaped detection during plating of the population under study. However, we have recently presented very strong evidence that, at least in the case of V. vulnificus, true resuscitation does occur.15 Our studies employed extensively diluted populations of VBNC cells in which it was statistically impossible that any culturable cells were present. Resuscitation of these populations occurred at such a rapid rate that, if it were due to regrowth of culturable cells, they would have to have had a doubling time of approximately 6 minutes. This is clearly an impossible generation time for cells incubated at a suboptimal temperature without nutrients or aeration (Fig. 1.5). We also observed that the presence of nutrients appears to inhibit (but not kill) VBNC cells, and this may be the reason such cells are “nonculturable” when plated onto the high organic nutrient media routinely employed for bacterial culture.
Detection of VBNC Cells
7
Fig. 1.5. Time required for resuscitation of VBNC V. vulnificus cells. Cells from a VBNC microcosm (< 3.3 x 101 cfu/ml) were shifted to room temperature and aliquots removed at hourly intervals and plated onto HI agar. Reprinted with permission from: Whitesides MD, Oliver JD. Appl Environ Microbiol 1997; 63:1002-1005.
1.7. In Situ Evidence of the VBNC Response This review has so far described laboratory findings regarding the VBNC state. One can validly question whether this response actually occurs in natural environments. We have conducted studies employing membrane diffusion chambers which clearly demonstrated the entry of V. vulnificus into the VBNC state when the estuarine waters into which they were submerged were cold.16 Similarly, when cells in the VBNC state were placed into chambers which were suspended into warm (summer) estuarine waters, resuscitation from the VBNC state occurred rapidly and to levels approximating those of the original population (Fig. 1.6). Thus, it is likely that our inability to isolate V. vulnificus during the winter months may be accounted for by entrance into the VBNC state, and that recovery from this state in natural environments may result from a temperature upshift. Taking these observations to their logical conclusions, it seems quite likely that the VBNC response may be a significant source of the variations seen in natural populations as they undergo various environmentally-induced stresses, and for inability to culture many of the microorganisms observed in natural environments. Indeed, Wilson and Lindow17 examined the culturability of P. syringae inoculated onto leaf surfaces, and found that up to 75% of the cells became nonculturable after 80 hours.
8
Tracking Genetically-Engineered Microorganisms
Fig. 1.6. Entry into (Fig. 1.6A) and resuscitation from (Fig. 1.6B) the VBNC state by V. vulnificus placed into membrane diffusion chambers in estuarine waters of the coast of North Carolina. A. Cells were placed into water at a temperature of 10-15˚C. Shown are plate counts (❍), total direct counts (●), and direct viability assays (❏). B. Plate counts of both the encapsulated (●) and non-encapsulated (❍) forms of V. vulnificus induced into the VBNC state in the laboratory at 5˚C. Four days after entry into the VBNC state (day 11), resuscitation of the cells is seen when placed into estuarine waters at a temperature of 16-19˚C. Reprinted with permission from: Oliver JD, Hite MF, McDougald D et al. Appl Environ Microbiol 1995; 61:2624-2630.
Detection of VBNC Cells
9
1.8. Use of PCR to Detect Cells in the VBNC State Alternate methods for detecting cells present in the VBNC state must be explored or developed. One powerful molecular method which would seem to be ideal for this purpose is the polymerase chain reaction (PCR). This method allows the specific DNA of the target bacterial population (in this case, the released GMOs) to be amplified, to the exclusion of that from other cells, to an extent that the amplified DNA can easily be detected, and thus the presence of the target cells determined. The use of PCR technology to amplify DNA from VBNC cells would seem to be an ideal match. However, in our earliest studies on the use of PCR methodology to detect cells of V. vulnificus present in the VBNC state, we found that as many as 500 times more VBNC cells had to be present to obtain an amplification signal as compared to culturable cells. Even when the DNA was extracted prior to amplification, 300 times or more DNA had to be present.18 In subsequent studies, we employed a variation on the PCR method, termed “randomly amplified polymorphic DNA” (RAPD) PCR analysis. To our surprise, when cells of V. vulnificus were induced into the VBNC state by incubation at 5˚C, our ability to detect amplification gradually decreased, until all bands were lost within a few days (Fig. 1.7). When the cells were subsequently allowed to resuscitate, RAPD-PCR amplification again occurred.19 The same observation has also been made by Bej et al20 with V. vulnificus. We surmise that, on incubation at the lowered temperature, the cells begin to synthesize cold shock-induced proteins, which prevent amplification of the DNA either by modifying the supercoiling of, or physically blocking the DNA polymerase from binding to, the target DNA. A similar result was observed when we used RAPD-PCR in an attempt to amplify cells of enterohemorrhagic E. coli as they entered the VBNC state.21 Even more dramatic was our finding that the RAPD-PCR signals we normally observed in V. vulnificus were lost within hours when the cells were deprived of nutrients.19 Resumption of amplification was observed only when nutrient was added back to the system, similar to the response seen when cells were resuscitated from the VBNC state. In all cases, loss of PCR amplification could be prevented when the cells were incubated in the presence of chloramphenicol, a protein synthesis inhibitor. This finding again suggests that protein synthesis is essential for cells to enter these stress-induced response states. The results of these studies bode poorly for the use of PCR technology as an alternative method for the detection of GMOs released to the environment which, for whatever reason, enter the VBNC state.
1.9. Effect of Plasmids on Entry into the VBNC State To make the situation potentially worse, it now appears that our knowledge of what induces the VBNC state in various bacteria must be re-examined, taking into account whether or not the cells under investigation harbor extrachromosomal plasmids. We have reported10 that Pseudomonas fluorescens cells enter the VBNC state when incubated in sterile river water at 37˚C, but not at 5˚ or 25˚C (Fig. 1.8A). In rather remarkable contrast, when this same strain harbored a plasmid (pFAC510), the cells entered the VBNC state at 5˚C, but not at 37˚C (Fig. 1.8B). The same result was seen for P. syringae, with and without an entirely different plasmid (pQF70/19H). Most recently, we have observed similarly dramatic plasmid effects when P. fluorescens is incubated in soil microcosms (Fig. 1.9). The fact that plasmids may have such a dramatic affect on culturability has obvious and significant implications for the monitoring of GMOs intended for environmental release. Indeed, the plasmid-induced “temperature reversal” observed in our studies suggests that such cells must be thoroughly characterized as to their plasmid content, with the realization that plasmid size and copy number may affect the temperature at which they enter the VBNC state.
10
Tracking Genetically-Engineered Microorganisms
Fig. 1.7. Randomly amplified polymorphic (RAPD) DNA analysis of V. vulnificus cells induced into the VBNC state by incubation at 5˚C. Lanes 1, 5, 9, 11, and 12 contain a 123 bp ladder. Lanes 2-4 contain cells entering the VBNC state at 0, 1, and 2 days; lanes 6-8 contain cells entering the VBNC state at 3, 4, and 5 days; lane 10 contains cells entering the VBNC state at 7 days. Reprinted with permission from: Warner JM, Oliver JD. Appl Environ Microbiol 1998; 64:3025-3028.
Fig. 1.8. (opposite) Effect of plasmid FAC510 carriage in P. fluorescens on culturability in river water at different temperatures. The same P. fluorescens strain was without the plasmid (, “parent”), with the plasmid (❍, “plasmid”), or with the entire plasmid inserted into the chromosome (, “chromosome”). Cells incubated at 5˚C (A) or at 37˚C (B). Plate counts were performed on L agar. Reprinted with permission from: Oliver JD, McDougald D, Barrett T et al. FEMS Microbiol Ecol 1995; 17:229-238.
Detection of VBNC Cells
11
12
Tracking Genetically-Engineered Microorganisms
Fig. 1.9. P. fluorescens placed into soil microcosms at 5˚(), 25˚(❍), and 37˚C (). Shown are plate counts for each temperature. S. Bunker and J.D. Oliver (unpublished).
1.10. Significance of the VBNC State in the Release of Genetically Modified Bacteria There are numerous practical consequences of the existence of the VBNC state in bacteria. One example is the fact that coliforms, the assay for which is employed worldwide as an indicator of fecal contamination of drinking and recreational waters, also enter the VBNC state. Entrance of these bacteria into this dormant state appears to result from exposure to low temperatures or to increased salt levels. Thus, it must frequently be the case that waters are considered to be “coliform negative” when, in fact, there is a large number of such indicator bacteria present, but in the nonculturable state! Another practical example is that of pathogenic bacteria, many of which are known to enter the VBNC state (see Table 1.1). If oysters are maintained on ice (as they should be!) for several days, this may be sufficient time to induce the VBNC state in V. vulnificus, which typically occurs at high levels in oysters (at least, in the Gulf Coast states of the United States). Public health officials who might examine such oysters for the presence of this species would then conclude the oysters were free of this potentially fatal human pathogen. As we have shown, however, cells of V. vulnificus in the VBNC state retain virulence, and remain capable of producing lethal infections when injected into laboratory mice.22 For a recent review on the public health significance of the viable but nonculturable state of pathogenic bacteria, see Oliver.23 Concern must also be present for researchers and government regulators involved in the release of genetically modified organisms (GMOs). Several bacterial species which are being considered, and even currently employed, for release studies are known to enter the VBNC state (Table 1.1). These include Pseudomonas fluorescens and P. syringae, both of which are induced into the VBNC state by incubation at the high temperatures (ca. 37˚C) which these cells would likely be exposed to in many environments.10 Other factors, such as
Detection of VBNC Cells
13
nutrient deprivation, may also be important for the induction of the VBNC state in pseudomonads. Wilson and Lindow17 have shown that cells of P. syringae which are actively growing on leaves or which were only recently inoculated to leaf surfaces remain fully culturable. However, their study showed that culturable counts of such cells, after 80 hours of epiphytic growth under constant environmental conditions, were two- to four-fold less than direct viable counts, indicating that up to 75% of the population had entered the VBNC state. As these authors stated, “This finding is particularly relevant to the monitoring and detection of GEMS [genetically engineered microorganisms] in terrestrial ecosystems, because if part of an epiphytic population has become metabolically inactive . . . the viable bacterial population size will be underestimated by the plate count method. The plate count may indicate that a GEM has disappeared from the ecosystem, whereas actually, the GEM is still present in low numbers in a viable but nonculturable, quiescent state.” The presence of bacterial cells in the VBNC state presents a major new dilemma in that the ability to monitor the persistence and spread of released GMOs is critical. The routine methods (primarily platings) for detecting bacteria in natural environments can not be employed for cells in the VBNC state. It also appears from our studies that alternate methods to detect such cells, such as PCR amplification, may not be practical alternatives. It must also be asked whether cells in this state are able to either donate or take up genetic material (plasmid or chromosomal DNA) to/from other bacteria which are present as part of the normal microflora. If such gene exchange is possible (although this has not been shown to date), then the problem is compounded, as not only would these GMOs be undetectable, but they might take part in the development of previously non-existent strains of bacteria. Most studies to date on VBNC cells from a variety of genera suggest that plasmids are not lost during entry into this state, suggesting that the acquisition of any new genes would likely take place in an otherwise relatively stable genetic environment. To conclude on a more positive note, our recent studies using certain genetically-tagged bacteria suggest some hope in our ability to detect bacteria present in natural environments in the VBNC state. The “green fluorescent protein” (Chapter 7) is an extremely stable protein which is coded for by the gfp gene present in certain marine jellyfish, and which fluoresces when irradiated with ultraviolet light. The use of this protein is currently finding considerable interest as a marker, following insertion of the gene into the DNA of bacteria intended for environmental release. In collaboration with Dr. Janet Jansson and researchers in her laboratory at the University of Stockholm, we have found that cells producing this fluorescent protein continue to fluoresce even when induced into the VBNC state. Indeed, as seen in Fig. 1.10, not only does a gfp-labeled strain of P. fluorescens continue to fluoresce as it becomes nonculturable, but it appears to fluoresce brighter than logarithmic phase (actively metabolizing) cells of the same gfp-labeled strain. If these results are corroborated in the field, then the use of this marker for monitoring released cells may be of significant value in providing a means of identifying released bacteria even when they are no longer culturable. Such field studies are currently in progress in the author’s laboratory.
1.11. Conclusion Since the pioneering studies from Colwell’s laboratory,24,25 it has become evident that many gram-negative bacteria enter into a state of dormancy in response to one or more of a variety of environmental stresses, including both low and high temperatures. VBNC cells remain metabolically active, although they can not be cultured by standard methods. Cells undergo a variety of morphological, physiological, and biochemical changes as they enter this state, all of which may allow the cells to survive what could otherwise be lethal conditions. On removal of the inducing stress, these cells can resuscitate from the VBNC state, again becoming metabolically active.
Tracking Genetically-Engineered Microorganisms
14
Fig. 1.10. Fluorescence due to the green fluorescent protein in P. fluorescens, as detected by flow cytometry. Shown is the percent of control cell fluorescence of cells incubated at 5˚C, 30˚C, and 37.5˚C for up to 19d. Cells incubated at 37.5˚C were completely nonculturable by day 15 in this study. M. Lowder and J.D. Oliver (unpublished).
Unfortunately, it appears that cells in the VBNC state may undergo changes in their chromosomal DNA which prevents their detection through PCR amplification. Further, it is possible that VBNC cells may participate in genetic exchange with bacteria making up the normal microflora of a release environment. Such an event could involve gain or loss of plasmids, an event having potentially dramatic consequences on the conditions inducing the VBNC state. Whether these dormant cells can be genetically transformed or transduced is not know at this time, but if so, such events could lead to significant genetic modifications in these nonculturable cells. Thus, the VBNC state presents a number of potential concerns to the researcher and regulator alike, making detection of the introduced cells difficult, and presenting a situation wherein gene exchange could potentially occur, yet be undetectable. Whether or not new technologies such as the use of the gfp marker gene will at least provide a means for monitoring such cells is currently under investigation.
Acknowledgments J.D. Oliver is a member of the MAREP Concerted Action sponsored by the European Commission Biotechnology Programme, DGXII.
References 1. Oliver JD. Formation of viable but nonculturable cells. In: Kjelleberg S, ed. Starvation in Bacteria. New York: Plenum Press 1993: 239-272. 2. Kogure K, Simidu U, Taga N. A tentative direct microscopic method for counting living marine bacteria. Can J Microbiol 1979; 25:415-420. 3. Duncan S, Glover LA, Killham K et al. Luminescence-based detection of activity of starved and viable but nonculturable bacteria. Appl Environ Microbiol 1994; 60:1308-1316.
Detection of VBNC Cells
15
4. Rattray EAS, Prosser JI, Killham K et al. Luminescence-based nonextractive techniques for in situ detection of Escherichia coli in soil. Appl Environ Microbiol 1990; 56:3368-3374. 5. Kaprelyants AS, Kell DB. Rapid assessment of bacterial viability and vitality using rhodamine 123 and flow cytometry. J Appl Bacteriol 1991; 72:410-422. 6. Paszko-Kolva C, Shahamat M, Yamamoto H et al. Survival of Legionella pneumophila in the aquatic environment. Microbiol Ecol 1991; 22:75-83. 7. McGovern VP, Oliver JD. Induction of cold responsive proteins in Vibrio vulnificus. J Bacteriol 1995; 177:4131-4133. 8. Linder K, Oliver JD. Membrane fatty acid and virulence changes in the viable but nonculturable state of Vibrio vulnificus. Appl Environ Microbiol 1989; 55:2837-2842. 9. Wolf PW, Oliver JD. Temperature effects on the viable but nonculturable state of Vibrio vulnificus. FEMS Microbiol Eco. 1992; 101:33-39. 10. Oliver JD, McDougald D, Barrett T et al. Effect of temperature and plasmid carriage on nonculturability in organisms targeted for release. FEMS Microbiol Ecol 1995; 17:229-238. 11. Oliver, JD, Nilsson L, Kjelleberg S. Formation of nonculturable cells of Vibrio vulnificus and its relationship to the starvation state. Appl Environ Microbiol 1991; 57:2640-2644. 12. Oliver JD. The viable but nonculturable state in the human pathogen Vibrio vulnificus. FEMS Microbiol Lett 1995; 133:203-208. 13. Nilsson L, Oliver JD, Kjelleberg S. Resuscitation of Vibrio vulnificus from the viable but nonculturable state. J Bacteriol 1991; 173:5054-5059. 14. Steinert M, Emody L, Amann R et al. Resuscitation of viable but nonculturable Legionella pneumophila Philadelphia JR32 by Acanthamoeba castellanii. Appl Environ Microbiol 1997; 63:2047-2053. 15. Whitesides MD, Oliver JD. Resuscitation of Vibrio vulnificus from the viable but nonculturable state. Appl Environ Microbiol 1997; 63:1002-1005. 16. Oliver JD, Hite MF, McDougald, D et al. Entry into, and resuscitation from, the viable but nonculturable state by Vibrio vulnificus in an estuarine environment. Appl Environ Microbiol 1995; 61:2624-2630. 17. Wilson M, Lindow SE. Relationship of total viable and culturable cells in epiphytic populations of Pseudomonas syringae. Appl Environ Microbiol 1992; 58:3908-3913. 18. Brauns LA, Hudson MC, Oliver JD. Use of the polymerase chain reaction in detection of culturable and nonculturable Vibrio vulnificus cells. Appl Environ Microbiol 1991; 57:2651-2655. 19. Warner JM, Oliver JD. Randomly amplified polymorphic DNA analysis of starved and viable but nonculturable Vibrio vulnificus cells. Appl Environ Microbiol 1998; 64:3025-3028. 20. Bej AK, Harold N, Vickery MCL et al. Use of PCR to determine genomic diversity and distribution of siderophore-mediated iron acquisition genes in clinical and environmental isolates of Vibrio vulnificus. Abstr Annu Meet Amer Soc Microbiol 1997; Q177, p.485. 21. Mickey S, Warner JM, Simpson LM et al. Detection of enterohemorrhagic Escherichia coli in the viable but nonculturable state using a RAPD-PCR protocol. Abstr Annu Meet Amer Soc Microbiol 1997; P78, 449. 22. Oliver JD, Bockian R. In vivo resuscitation, and virulence towards mice, of viable but nonculturable cells of Vibrio vulnificus. Appl Environ Microbiol 1995; 61:2620-2623. 23. Oliver JD. Public health significance of viable but nonculturable bacteria. In: Colwell RR, Grimes J eds. Nonculturable Organisms in the Environment. ASM Press, 1999 (in press). 24. Roszak DB, Colwell RR. Survival strategies of bacteria in the natural environment. Microbiol Rev 1987; 51:365-379 25. Xu HS, Roberts NC, Adams LB et al. Survival and viability of nonculturable Escherichia coli and Vibrio cholerae in the estuarine and marine environment. Microb Ecol 1984; 8:313-323.
CHAPTER 2
The Use of Antibiotic Resistance Gene Markers for Studying Bacterial Populations in Natural Environments Sharon Egan and Elizabeth M H Wellington
2.1. Introduction
A
ntibiotic resistance genes have been used to mark bacteria by providing a readily selectable phenotype, which can be detected using selective growth media. Detection and monitoring is therefore culture-dependent. A wide range of resistance genes have been characterised (Tables 2.1 and 2.2) which confer resistance to commercially available, inexpensive antibiotics. In addition, resistance genes have provided a valuable tool for cloning and genetic manipulation procedures in both prokaryotes and eukaryotes. Many industrial strains carry resistance genes which have resulted from cloning procedures, enabling selective maintenance of a construct or plasmid carrying the resistance gene by inclusion of the respective antibiotic in the growth medium (For details see ref. 1). The main environmental application for antibiotic resistance gene markers has been the monitoring of gene transfer associated with plasmid or transposon mobility. In addition, the tracking of bacterial populations in soil, water or other environments, and determination of the extent of plant root or shoot colonisation has relied on antibiotic resistance phenotypes.2-4 A distinction can be made between the use of antibiotic resistant mutants and the introduction of cloned resistance genes. The former have been used in field releases where it was necessary to avoid releasing antibiotic resistance genes into the environment.2 The selection provided by antibiotics has provided a powerful tool for isolation of marked bacteria and cultivation based assays have allowed quantitative estimates of cell numbers. Resistance genes have also been detected using molecular methods such as PCR, and this approach provides confirmation of the phenotype. Due to ergotropic and clinical use, some resistance genes have become widely disseminated in the environment and are less useful as selective markers. The choice of resistance gene is therefore important to avoid certain common genotypes. For field releases ethical considerations are important to avoid the use of any resistance gene which may become disseminated to the indigenous bacterial community and thus ultimately contribute to the clinical problems of antibiotic resistant pathogens. The aim of this chapter is to provide information useful for the selection and exploitation of resistance genes as markers for detection and enumeration of bacteria in natural environments.
Tracking Genetically-Engineered Microorganisms, edited by Janet K. Jansson, Jan Dirk van Elsas, Mark J. Bailey. ©2000 EUREKAH.COM.
Tracking Genetically-Engineered Microorganisms
18
Table 2.1. Some examples of common bacterial resistance genes and their mode of action Gene
Resistance phenotype
Host
Mechanism of resistance
aph(3)-Iva nptII aphII tsr strA ant(2)-I ant(6)-Ia ant(9)-Ia aac(3)-I aac(6)-Ih aac(3)-Ia mgt tetA/B/C tet(M) ampC otrA/B
kanamycin, neomycin kanamycin, neomycin neomycin thiostrepton streptomycin gentamicin, sisomicin streptomycin spectinomycin gentamicin sisomicin, tobramycin gentamicin, sisomicin oleandomycin tetracycline tetracycline β-lactams oxytetracycline
Bacillus circulans Enterobacter Streptomyces lividans S. lividans Enterobacter Pseudomonas E. faecalis Staphylococcus aureus Pseudomonas Acinetobacter spp. E. coli Streptomyces antibioticus Enterobacter Streptococcus pneumoniae gram-negative bacteria Streptomyces rimosus
Phosphorylation Phosphorylation Phosphorylation Target modification Phosphorylation Nucleotidyltransferase Adenylylation Adenylylation Acetylation Acetylation Acetylation Glycosyltransferase Efflux Ribosomal modification Hydrolysis Ribosomal modification/efflux
2.2. Cultivation Based Assays The traditional approach for monitoring bacteria using antibiotic resistance is selective agar plate counting, although the most probable number technique (MPN) can be used for selective broth culture. Agar antibiotic gradient plates, in which the antibiotic concentration increases linearly from zero to an established level, are produced by making an agar gradient containing the antibiotic and covering a basal agar layer without antibiotic. Such gradients are difficult to replicate and have not generally been used for isolation and counting although they are useful for characterisation of isolates.5 Many antibiotics are unstable, and biological activity can therefore decrease with time or due to inappropriate handling. For example, tetracycline is light sensitive and β-lactams and aminoglycosides, such as neomycin are heat sensitive. Some antibiotics, such as thiostrepton, are only soluble in organic solvents and so will be insoluble in agar forming a suspension, thus affecting availability and activity.6 The bioactivity of antibiotics in agar is affected by many factors (see Hewitt7) and it is well known that they are often complexed by particular constituents of media. Philips8 demonstrated that viomycin exerted a greater selective effect in a defined medium than in a complex one. Methods manuals may often indicate two concentrations of antibiotics, for use in either defined or complex media (For example see ref. 9). The degree of resistance may also be affected by the levels of salt in the cultivation medium; lower salt concentrations can make some bacteria more sensitive.9 Problems can also occur with very polar compounds, for example, streptomycin is a highly water-soluble polar antibiotic and the generation of agar gradients with this compound is particularly difficult as it diffuses very rapidly throughout the agar plate.8 Cultivation-based assays are quantitative, but this procedure is dependent on the bacteria being culturable. The physiological state of the marked bacterium is important and can determine how readily target bacteria can be isolated on highly selective media. The stress of inoculation into a nutrient poor environment such as soil may result in the inoculant becoming nonculturable on isolation media (see Chapter 1) or becoming susceptible
Antibiotic Resistance Gene Markers
19
Table 2.2. Antibiotic resistance genes used as markers Resistance phenotype
Gene/ transposon
Host
Detection1
Reference
kanamycin
aph/ nptII
Enterobacter agglomerans
SP, PCR
Selenska et al14
Escherichia coli
SP, MPN-PCR
Recorbet et al15
kanamycin
nptII
kanamycin
nptII (Tn501) E.coli
SP, probing
Zeph and Stotzky33
kanamycin
nptII (Tn903) Erwinia carotovora
SP
Orvos et al34
kanamycin
nptII (Tn5)
Azospirillum sp.
SP, MPN probing
Bentjen et al35
kanamycin
nptII (Tn5)
P.fluorescens
SP, MPN-PCR
van Overbeek et al32
neomycin
nptII (Tn5)
R.leguminosarum
SP, probing
Hirsch and Stokes2
neomycin
nptII (Tn5)
Rhizobia
SP, probing
Armager and Delgutte44
erythromycin
erm
Bacillus
SP
Wendt/Potthof et al55
kanamycin
nptII
P. fluorescens
SP
Smit and van Elsas24
gentamicin
aadB
chloramphenicol cam
B. subtilis
SP
McDonald et al46
kanamycin
Tn5
E.agglomerans /E.coli
SP
Klingmüller50
neomycin, thiostrepton viomycin
aphII tsr vph
Streptomyces lividans SP
Herron et al6
thiostrepton
tsr
S. lividans
SP, probing
Marsh and Wellington31
tetracycline
unknown
B. subtilis
SP
Amner et al21
neomycin
aphII
Streptomyces violaceolatus/ S. lividans
SP
Wellington et al16
thiostrepton viomycin
tsr vph
1SP: Selective plating, MPN-PCR: Most-probable number-PCR.
20
Tracking Genetically-Engineered Microorganisms
to selective components in the medium such as antibiotics. Under nutrient limitation some bacteria have been demonstrated to be less susceptible to antibiotics.10,11
2.3. Direct Molecular Monitoring Methods Since the development of the polymerase chain reaction (PCR), molecular monitoring methods for resistance genes have proved to be sufficiently sensitive for detection of sparse populations in natural environments and now provide a valuable adjunct to cultivation assays. However, viability and cellular location of a DNA target cannot be established by PCR detection. In addition, problems still exist with quantitation of PCR although a number of methods have been described for quantitative PCR with targets in natural samples (see Chapter 3).12,13 PCR has been used to examine the persistence of genes introduced to environments such as soil, and in the case of resistance genes, the marker has allowed comparison of molecular and cultivation based detection. Selenska et al 14 targeted the chromosomally-located resistance gene markers aph and nptII. PCR amplification of these genes from total community DNA allowed detection of these genes 56 days after inoculation, even though the Enterobacter agglomerans kanamycin-resistant host could no longer be detected on agar plates. This discrepancy indicated that either the DNA was extracellular and had been released from dead bacteria, or that cells were not culturable. Recorbet et al15 determined the survival of an Escherichia coli population in soil using thenptII gene, and noted that the population decreased to < 102 after 15 days, as calculated by selective plate counts. However, by use of the most-probable-number-PCR method, 5 x 105 target sequences could still be detected after 40 days. It was not clear if this apparent population remaining in the soil was viable but uncultured or simply represented dead cells and extracellular DNA.
2.4. Choice of Antibiotic Resistance Gene Markers The choice of resistance gene markers depends on the environmental use of the marked bacterium and is influenced by the background resistance of the indigenous bacteria in a given habitat. Members of some genera, including Pseudomonas, Mycobacterium and Rhodococcus, have nonspecific mechanisms for resistance to antibiotics and heavy metals, including exclusion from the cell.16 The levels of resistant indigenous bacteria depends on the antibiotic and can range from 103-104 cfu g-1 dry soil for tetracycline and ampicillin resistance17 to 108 cfu g-1 for tobramycin resistance.18 Amner et al19 suggested that examination of the antibiotic resistance profiles of indigenous populations and resistance genes within the gene pool of microbial populations from different environments could be useful in the development of marker systems. The fate of thermophilic actinomycetes in compost was monitored,20 where all microbial constituents of the microflora were sensitive to tetracycline. This resistance gene was thus suitable for introduction into host vector systems to allow the detection of host organisms.21 A plasmid encoding tetracycline resistance was used to monitor Bacillus subtilis in compost. The use of just a single resistance marker was feasible due to the low level (103) of tetracycline resistant isolates in the indigenous bacteria. 21 Conversely, Smalla et al22 examined the distribution of kanamycin resistance in bacteria from different habitats and demonstrated that the resistance phenotype was widely distributed among indigenous bacteria in most habitats examined. Multiple-resistance phenotypes may overcome the problems of background resistance in indigenous bacteria. The use of combined markers for phenotypes which occur less frequently in bacteria, such as viomycin and thiostrepton resistance, is successful and can increase selectivity for an introduced strain. Certain antibiotic resistances often have a low occurrence in indigenous bacteria because of the rarity of use of the antibiotic in medicine,
Antibiotic Resistance Gene Markers
21
veterinary science or agriculture. In addition, selection from antibiotic-producing bacteria must also have been absent. The combination of two resistance gene markers was used by Cresswell23 to track plasmid-containing streptomycetes in soil. The tsr and nptII genes for thiostrepton and neomycin resistance, respectively, were rarely found in actinomycetes, which also allowed monitoring and detection by PCR. A study by Smit and van Elsas24 used a combination of kanamycin and gentamicin resistance which lowered the level of resistant indigenous bacteria from 105-104 cfu g-1 of dry soil for kanamycin to 103 isolates resistant to both kanamycin and gentamicin. A marker gene cassette with nptII (kanamycin resistance) and aadB (gentamicin resistance) was constructed because these two genes were considered to have a low probability of phenotype and/or genotype prevalence in the indigenous soil populations. This gene cassette was cloned into both a broad-host-range mobilisable plasmid and into a disarmed transposon which would allow tagging of the host’s chromosome. Alternatively, additional markers can be incorporated into hosts, which allow differentiation between the inoculated host and background indigenous bacteria. Van Elsas et al25 engineered an additional unexpressed gene, pat, into the RP4 plasmid of Pseudomonas fluorescens which allowed specific identification of the introduced population by selective plating using the resistance of RP4, followed by DNA hybridisation. Similarly, McNaughton et al26 combined the use of two markers, kanamycin resistance and xylE, on a plasmid introduced into soil. Kanamycin was used in the selective isolation of resistant bacteria, including the inoculant population. Isolates were then examined for catechol oxidation to unequivocally identify the inoculant. When multiple resistance markers have been combined with additional markers for definitive identification, they have proved useful in initial selective procedures.
2.5. Cross-Resistance Resistance to the same antibiotic can be achieved by different genes coding for enzymes with various modes of action or the same gene can confer resistance to more than one antibiotic (Table 2.2). Resistance to paromomycin is conferred by either a phosphotransferase or an acetyltransferase.27 Other resistance gene products can confer a ‘cross-resistance’ to different antibiotics, for example, Skeggs et al28 have shown that an RNA methylase aminoglycoside resistance determinant can confer resistance to kanamycin, apramycin and gentamicin. The aac resistance gene which encodes an acetyltransferase in Streptomyces fradiae and the phosphotransferase-encoding nptII from Tn5 confer resistance to both neomycin and kanamycin.9,29 This functional diversity in resistance genes means that the same phenotype can be due to quite different genes. Unequivocal identification is only possible with selective isolation followed by a molecular method to confirm the presence of the specific resistance marker.17,30-32
2.6. Marking of Bacteria with Antibiotic Resistance Genes Chromosomes of bacteria are often marked by the use of random or site-specific integration vectors, such as transposons. Location of marker genes on the chromosome instead of plasmids may improve stability, and although this reduces the likelihood of a transfer event, it does not eliminate it. Insertion of markers into the chromosome has been achieved by random integration of transposons which encode resistance genes, such as Tn501 in E. coli,33 Tn903 in Erwinia carotovora,34 Tn5 in Azospirillum35 or Pseudomonas fluorescens.32 The fate of bacteria introduced into different environments has been monitored using these transposons. One of the best characterised systems is that for monitoring Rhizobium strains in soil where markers have been developed to monitor numerous field releases of engineered rhizobial strains. Rhizobium leguminosarum was marked by the insertion of Tn5,2 which allowed selection
22
Tracking Genetically-Engineered Microorganisms
for neomycin resistance on isolation media. This phenotype was not found in native rhizobia, which made it a suitable marker, particularly in combination with the spontaneous chromosomally located rifampicin resistance mutation. Antibiotic resistance gene markers have been inserted on multiple and single copy plasmids for monitoring the fate of inoculants and gene transfer in natural environments. The choice of chromosomal or plasmid location is dependent on the requirements of the study, but gene dose effects with multicopy plasmids will greatly improve molecular detection of both DNA and mRNA. In addition, enhanced phenotypic resistance from multiple copies of the resistance gene marker will aid selection.9 Both naturally occurring R-plasmids and constructed plasmids with one or multiple resistance genes are readily available. However, R-plasmids are mainly found in gram-negative hosts and many will not be able to replicate in gram positive backgrounds. Plasmids from gram-negative and gram positive bacteria have very different conjugation systems and genes involved in plasmid transfer, replication and maintenance are very diverse.36 For gram positive bacteria, resistance plasmids have been constructed (see next section 2.7). For example, Wipat et al 37 used tsr to mark a multicopy streptomycete plasmid which was then introduced into Streptomyces lividans via transformation of protoplasts. This allowed the monitoring of survival and spread of S. lividans in soil microcosms.37 Many resistance marker genes can function in different bacterial species; for example, the nptII gene has been used in many different genera (Table 2.2), but other marker systems are restricted to specific groups. The host range of the vector must also be considered. Although the nptII gene occurs frequently in diverse bacteria, it is often associated with different transposons (Table 2.2). The choice of promoters for marker genes is also an important consideration. The nptII gene from Tn5 is expressed in Streptomyces, but the level of kanamycin resistance varies from 2-200 mg/ml, depending on promoter strength and copy number of the plasmid.9
2.7. Use of Antibiotic Resistance Genes to Monitor Gene Transfer in Soil Antibiotic resistance markers have been used to study gene mobility and dissemination of antibiotic resistance genes has been the subject of a large number of studies due to the problem of drug resistance in bacterial pathogens. Resistance genes are highly mobile under intense selection pressure in clinical environments and have been found associated with chromosomes, plasmids, integrons and bacteriophages.38,39 The application of antibiotics such as streptomycin to treat bacterial rots in soft fruit has resulted in the spread of selected streptomycin resistance genes in Pseudomonas species.40 In addition, genes involved in streptomycin production by streptomycetes are more widely distributed than was previously thought.41,42 There is evidence for the actual presence of antibiotics in soil. Phenazine43 and thiostrepton16 have been detected in soils following the introduction of the respective producer strain. Such antibiotics produced in situ could provide selection pressure for resistance in nature, but at a lower level compared with agricultural, veterinary and clinical environments. Overall, the extent of selection in the natural environment is not well defined. Hirsch and Spokes2 used the Tn5 transposon carrying the nptII gene to mark Rhizobium leguminosarum. and introduced 1012 culturable cells of the strain into soil. Survival was monitored by plating onto selective agar, followed by hybridisation with a Tn5 probe. This study demonstrated that no transconjugants were found, although it was suggested that transfer could have occurred below the limit of detection (< 0.02% isolates received Tn5).2 The inoculant strain persisted in the soil and could be detected seven years later, even in soils in which non-cereal crops were cultivated. A similar study by Armager and Delgutte44 examined the transfer of a Tn5 tagged conjugative plasmid in the same Rhizobium strain in
Antibiotic Resistance Gene Markers
23
the rhizosphere of different plants and also failed to detect transfer of Tn5 to other rhizobia and even to introduced potential recipients. Other antibiotic resistance gene markers have been used to study plasmid transfer in the natural environment and to examine the extent of conjugation in soil. Cresswell monitored the transfer of plasmid pIJ673 containing neomycin (aphII), viomycin (vph) and thiostrepton (tsr) resistance genes. The plasmid was a derivative of pIJ101.23 Putative transconjugants were selected by growth on neomycin plus thiostrepton-containing agar plates and plasmid presence confirmed by colony hybridisation with a labeled plasmid as a probe. This technique was used to show inter-specific plasmid transfer in Streptomyces strains in both sterile and non-sterile soil batch microcosms.6,30 High copy number plasmids also provide an advantage by effectively increasing the copy number of the gene, which can enhance detection by molecular methods. In a study by Smit and van Elsas24 a plasmid and a chromosomally-inserted transposon were stably maintained in Pseudomonas fluorescens R2f in soil for 7 days and a broad host range plasmid (IncQ) could be mobilised into several indigenous bacterial species. McDonald et al45 examined the persistence of a plasmid encoding chloramphenicol resistance in B. subtilis and reported that plasmid stability in the inoculant population remained at 100% after 28 days. Other studies have shown that engineered plasmids are not stably maintained by the hosts, particularly when released into the environment.46,47 It could be interpreted that in these cases the burden of maintaining multicopy plasmids is greater than the advantage conferred on the host by the marker gene phenotype.48 Examination of intrageneric plasmid transfer in soil has shown that Tn5 labeled plasmids in both E. agglomerans and E. coli could transfer to homologous strains in soil, and the transfer frequency was enhanced by the input of particular nutrients into the system.49 Herron et al6 used pIJ673 (containing nptII, vph and tsr) to monitor the selective effect of antibiotics on the plasmid transfer and survival of Streptomyces in soil microcosms. This study demonstrated that addition of neomycin and thiostrepton to soil microcosms increased the levels of resistant transconjugants from 103 to 105. The population dynamics of bacteriophage and their hosts in soil has also been studied by marking phage with antibiotic resistance genes. Marsh and Wellington31 examined the lysogenic infection of indigenous soil Streptomyces species by using a bacteriophage containing a thiostrepton resistance gene to mark bacteriophage and then select for host resistance in soil microcosms. The addition of tsr marked KC301 actinophage lysates to nonsterile soil gave rise to thiostrepton resistant indigenous streptomycetes which were subsequently shown to contain KC301 DNA by colony blots. Probing digested chromosomal DNA of some of the lysogens showed that their chromosomes contained KC301 prophage.
2.8. Ethical Concerns Although there are obvious advantages in the use of antibiotic resistance gene markers, their value for field releases has been limited. This is probably due to the ethical questions raised about deliberately releasing resistance genes into the environment, which presents the risk of spread into the indigenous bacterial population. However, transfer is known to be limited in conditions of low nutrients24,16 and is also affected by the activity and spatial distribution of bacteria in addition to physical conditions in the soil.50 The problem of transfer has been addressed with the development of modified vectors which inhibit the movement of resistance genes into new hosts.51,52 There is widespread resistance in indigenous bacteria to selected antibiotics in current use in agriculture such as streptomycin. However, there will soon be restrictions on the use of antibiotics in animal growth promotion to reduce the future development of resistance in enteric bacteria. There is a clear link between the development of resistance in antibiotic-fed farm animals and the dissemination
24
Tracking Genetically-Engineered Microorganisms
of antibiotic resistance genes in enteric bacteria in the environment and within pathogenic groups.53 These data demonstrate the horizontal transfer of genes in natural populations and their selection under conditions of antibiotic administration. Therefore, selection pressure is the key problem. Certain antibiotic resistance gene markers have been proposed for environmental use due to the lack of clinical application of the antibiotic used for selection, thus reducing the chance of resistance development. However, it is often uncertain which chemical classes of antibiotic will prove to be clinically useful in the future and how far cross resistance will affect the use of chemically similar antibiotics. In the case of the antibiotic avoparcin, a glycopeptide fed to pigs and poultry, there was not sufficient difference compared to vancomycin, the clinically important glycopeptide, to prevent cross resistance developing.53 As already discussed in Section 2.6, some field releases have been approved which used antibiotic resistance gene markers for tracking genetically modified micro-organisms (GMMs) and included Tn5 and the kanamycin resistance gene aph(3')-II (see Chapter 8). The risk of a gene transferring from GMMs into the environmental gene pool is presumably greater than for a transgenic crop plant marked with an antibiotic resistance gene. The only GMM-based product containing an antibiotic resistance gene for marketing within the European Union is a kit consisting of Streptococcus thermophilus modified with the cat (chloramphenicol acetyltransferase) gene. The cat gene is located on a plasmid, pMJ723, harbouring the lux genes, and detects antibiotic residues in milk. The strain is not released into to the environment, as it is contained in vials throughout the test. For transgenic crop plants, the marker antibiotic resistance genes aph(3')-II and blaTEM-1, for kanamycin/neomycin resistance and β-lactam resistance respectively, have been approved for marketing within Europe. Future research should address the levels of transfer of these genes to indigenous micro-organisms, as plant DNA containing aph(3')-II is known to successfully transform suitable, competent, recipient bacteria. 54
2.9. Conclusion Antibiotic resistance genes have a long history of reliability for use as highly selective, versatile markers allowing detection and enumeration of bacteria in environmental samples. Resistance genes found in non-antibiotic producing bacteria are readily expressed in a wide range of host backgrounds. Examples include the neomycin resistance gene, nptII, which has been used in gram-positive (high and low GC) and gram-negative bacteria, yeasts, plant and animal cell cultures. The resistance genes are highly mobile between bacterial groups and this may be a reason for their versatility and often near universal expression. A wide range of genes have been cloned and frequently used with their own promoter in diverse hosts. Levels of expression and strength of resistance may vary slightly from strain to strain but this is also related to the nature of the construct used. Multiple copies of a resistance gene secure high levels of resistance but only under defined conditions of growth and assay. No other type of marker provides such an extensive range of genes for use with almost any bacterium, resulting in a highly selective marker. Some bacteria now carry an extensive range of antibiotic resistance genes resulting from the excessive use of antibiotics for over 50 years and this may reduce the choice of genes useful for marking a strain within a population of close relatives. The background resistance of indigenous bacterial populations may also be a problem where certain phenotypes, such as kanamycin resistance, are widespread in soil bacteria due to the use of antibiotics in agriculture. This problem can be overcome by combining unique sets of resistance genes or by combining resistance genes with markers such as lux or gfp (see Chapters 5-7).
Antibiotic Resistance Gene Markers
25
Acknowledgments E.M.H. Wellington is a member of the MAREP Concerted Action sponsored by the European Commission Biotechnology Programme, DGXII.
References 1. Sambrook J, Fritsch EF, Maniatis T. Molecular cloning: a laboratory manual, 2nd ed. NY: Cold Spring Harbour Laboratory Press, 1989. 2. Hirsch P, Spokes JD. Survival and dispersion of genetically modified rhizobia in the field and genetic interactions with native strains. FEMS Microbiol Ecol 1994; 15:147-160. 3. Kinkel LL, Wilson M, Lindow SE. Utility of microcosm studies for predicting phylloplane bacterium population sizes in the field. Appl Environ Microbiol 1996; 62:3413-3423. 4. Nielsen KM, Bones AM, van Elsas JD. Induced natural transformation of Acinetobacter calcoaceticus in soil microcosms. Appl Environ Microbiol 1997; 63:3972-3977. 5. Philips L, Wellington EMH. The distribution of DNA sequences hybridizing with antibiotic production and resistance gene probes within type strains and wild isolates of Streptomyces species. J Antibiotics 1992; 45:1481-1491. 6. Herron PR, Toth IK, Heilig GHJ et al. Selective effect of antibiotics on survival and gene transfer of streptomycetes in soil. Soil Biol Biochem 1998; 30:673-677. 7. Hewitt W. Microbiological Assays. London: Academic Press, 1977:284-317. 8. Philips L. PhD thesis. University of Warwick, U.K. 1992. 9. Hopwood DA, Bibb MJ, Chater KF et al. Genetic Manipulation of Streptomyces: A laboratory manual. Norwich: The John Innes Foundation, 1985. 10. Oliver JD. The viable but non-culturable state in the human pathogen Vibrio vulnificus. FEMS Microbiol Lett 1995; 133:203-208. 11. Turpin P, Dhir VK, Maycroft K et al. The effect of Streptomyces species on the survival of Salmonella in soil. FEMS Microbiol Ecol 1992; 101:271-280. 12. Picard C, Ponsonnet C, Paget C et al. Detection and enumeration of bacteria in soil by direct DNA extraction and polymerase chain reaction. Appl Environ Microbiol 1992; 58:2717-2722. 13. Romanowski G, Lorenz M, Wackernagel W. Use of PCR to monitor the persistence of extracellular plasmid DNA introduced into soils. Appl Environ Microbiol 1993; 59:3438-3446. 14. Selenska S, Schenzinger S, Klingmuller W. Direct detection of particular DNA sequences in soil. In: Gauthier MJ, ed. Gene transfers and environments. Proceedings of the third European meeting on Bacterial Genetics and Ecology (BAGECO-3). Springer-Verlag 1992:3-8. 15. Recorbet G, Picard C, Normand P et al. Kinetics of the persistence of chromosomal DNA from genetically engineered Escherichia coli introduced into soil. Appl Environ Microbiol 1993; 59:4289-4294. 16. Wellington EMH, Herron PR, Cresswell N. Gene transfer in terrestrial environments and the survival of bacterial inoculants in soil. In: Edwards C, ed. Monitoring genetically Manipulated Microorganisms in the Environment. Chichester: John Wiley and Sons. 1993: 137-170. 17. van Elsas JD, Trevors JT. Plasmid transfer to indigenous bacteria in soil and rhizosphere: problems and perspectives. In: Fry JC and Day MJ eds. Bacterial Genetics in Natural Environments. Chapman and Hall, 1993:188-199. 18. Henschke RB, Schmidt FRJ. Use of wide host range promoters to monitor the fate of recombinant DNA in soil. In: Fry JC and Day MJ eds. Bacterial Genetics in Natural Environments. Chapman and Hall, 1993:200-206. 19. Amner W, Edwards C, McCarthy AJ. Composting as a model system for monitoring the fate of genetically manipulated gram-positive bacteria. In: Edwards C, ed. Monitoring Genetically Manipulated Microorganisms in the Environment. Chichester: John Wiley and Sons, 1993: 83-109.
26
Tracking Genetically-Engineered Microorganisms
20. Amner W, McCarthy AJ, Edwards C. Quantitative assessment of factors affecting the recovery of indigenous and released thermophilic bacteria from compost. Appl Environ Microbiol 1988; 54:3107-3112. 21. Amner W, McCarthy AJ, Edwards C. Survival of a plasmid-bearing strain of Bacillus subtilis introduced into compost. J Gen Mirobiol 1991; 137:1931-1937. 22. Smalla K, van Overbeek LS, Pukall R et al. Prevalence of nptII and Tn5 in kanamycinresistant bacteria from different environments. FEMS Microbiol Ecol 1993; 13:47-58. 23. Cresswell N. PhD thesis. University of Warwick, U.K. 1992. 24. Smit E,van Elsas JD. Conjugal gene transfer in the soil environment; New approaches and developments. In: Gauthier MJ, ed. Gene transfers and environments. Proceedings of the third European meeting on Bacterial Genetics and Ecology (BAGECO-3). Springer-Verlag 1992:79-94. 25. van Elsas JD, Fouchier R, van Overbeek LS. A specific marker, pat, for studying the fate of introduced bacteria and their DNA in soil using a combination of techniques. Plant and Soil. 1991; 138:49-60. 26. McNaughton SJ. Rose DA, O’Donnell AG. Growth and survival of genetically modified Pseudomonas putida in soils of different texture. In: Stewart-Tull DES, Sussman M. eds. The release of genetically modified microorganisms-REGEM 2. New York: Plenum Press,1992, 191-193. 27. Zalacain M, Gonzalez A, Guerrero MC et al. Nucleotide-sequence of the hygromycin-β phosphotransferase gene from Streptomyces hygroscopicus. Nucleic Ac Res 1986; 14: 1565-1581. 28. Skeggs PA, Holmes DJ, Cundliffe E. Cloning of aminoglycoside-resistance determinants from Streptomyces tenebrarius and comparison with related genes from other actinomycetes. J Gen Microbiol. 1987; 133:915-23. 29. Shaw KJ, Rather PN, Hare RS et al. Molecular genetics of aminoglycoside resistance genes and familial relationships of the aminoglycoside-modifying enzymes. Microbiol Rev 1993; 57:138-163. 30. Wellington EMH, Cresswell N, Saunders V. Growth and survival of streptomycete inoculants and extent of plasmid transfer in sterile and non-sterile soil. Appl Environ Microbiol 1990; 56:1413-1419. 31. Marsh P, Wellington EMH. Phage-host interactions in soil. FEMS Microbiol Ecol 1994; 15:99-108. 32. van Overbeek LS, van Veen JA, van Elsas JD. Induced reporter gene activity, enhanced stress resistance and competitive ability of a genetically modified Pseudomonas fluorescens strain released into a plot planted with wheat. Appl Environ Microbiol 1997; 63:1965-1973. 33. Zeph LR, Stotzky G. Use of a biotinylated DNA probe to detect bacteria transduced by bacteriophage P1 in soil. Appl Environ Microbiol 1989; 55:661-665. 34. Orvos DR, Lacy GH, Cairns J. Genetically engineered Erwinia carotovora—Survival, intraspecific competition, and effects upon selected bacterial genera. Appl Environ Microbiol 1990; 56:1689-1694. 35. Bentjen SA, Fredrickson JK, van Voris P. Intact soil-core microcosms for evaluating the fate and ecological impact of the release of genetically engineered microorganisms. Appl Environ Microbiol 1989; 55:198-202. 36. Macrin FL, Archer GL. Conjugation and broad host range plasmids in streptococci and staphylococci. In: Clewell DB, ed. Bacterial Conjugation. London: Plenum Press, 1993: 313-330. 37. Wipat A, Wellington EMH, Saunders VA. Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil. Appl Environ Microbiol 1991; 57:3322-3330. 38. Tschäpe H. The spread of plasmids as a function of bacterial adaptability. FEMS Microbiol Ecol 1994;15:23-32. 39. Salyers AA, Shoemaker NB. Broad host range gene transfer: Plasmids and conjugative transposons. FEMS Microbiol Ecol 1994; 15:15-22. 40. Sundin GW, Monks DE, Bender CL. Distribution of the streptomycin-resistance transposon Tn5393 among phylloplane and soil bacteria from managed agricultural habitats. Can J Microbiol 1995; 41:792-799.
Antibiotic Resistance Gene Markers
27
41. Wiener P, Egan S, Huddleston, AS, Wellington EMH. Evidence for transfer of antibiotic resistance genes in soil populations of streptomycetes. Mol Ecol 1998; 7:1205-1216. 42. Egan S, Wiener P, Kallifidas D, Wellington EMH. Transfer of streptomycin biosynthesis gene clusters within streptomycetes isolated from soil. Appl Environ Microbiol 1998; 64:5061-5063. 43. Thomashow L, Weller DM, Bonsall RF et al. Production of the antibiotic phenazine-1carboxylic acid by fluorescent Pseudomonas species in the rhizosphere of wheat. Appl Environ Microbiol 1990; 56:908-912. 44. Amarger N and D. Delgutte. Assesment of gene transfer under field conditions in France. In: Abstracts of: Horizontal Gene transfer- Mechanisms and Implications. Bielefield, Germany. 1994. 45. McDonald IR, Riley PW, Sharp RJ et al. Survival of plasmid-containing Bacillus subtilis released into mushroom compost. Microbial Ecol 1998; 36:51-59. 46. Tokuda Y, Ano T, Shoda M. Survival of Bacillus subtilis Nb22, an antifungal-antibiotic iturin producer, and its transformant in soil-systems. J. Ferment. Bioeng. 1993; 75: 68-73. 47. Crowley DE, Brennerova MV, Irwin C. Rhizosphere effects on biodegradation of 2,5dichlorobenzoate by a bioluninescent strain of root-colonizing Pseudomonas fluorescens. FEMS Microbiol Ecol 1996; 20:79-89. 48. Tang WZ, Pasternak JJ, Glick BR. Persistence in soil of the plant-growth promoting rhizobacterium Pseudomonas putida gr12-2 and genetically manipulated derived strains. Canad J Microbiol 1995; 41 445-451. 49. Klingmuller, W. 1992. Risk assesment in releases of nitrogen-fixing Enterobacter into soil; survival and gene transfer, as influenced by agricultural substrates. In: Stewart-Tull DES, Sussman M, eds. The Release of Genetically Modified Microorganisms-REGEM 2. New York: Plenum Press,1992:155-157. 50. van Elsas JD. Antibiotic resistance gene transfer in the environment: an overview. In: Wellington EMH, van Elsas JD, eds. Genetic Interactions Among Microorganisms in the Natural Environment. Oxford: Pergamon Press, 1992; 17-39. 51. Bej AK, Perlin MH, Atlas RM. Model suicide vector for containment of genetically engineered microorganisms. Appl Environ Microbiol 1988; 54:2472-2477. 52. Sanchis V, Agaisse H, Chafaux J et al. A recombinase-mediated system for elimination of antibiotic resistance gene markers from genetically engineered Bacillus thuringiensis strains. Appl Environ Microbiol 1997; 63:779-784. 53. Witte W. Impact of antibiotic usage in animal feeding on resistance of bacterial pathogens in humans. In: Chadwick DJ, Goode J, eds. Antibiotic resistance: Origins, evolution, selection and spread. Ciba Foundation Symposium 207. Chichester:John Wiley and Sons, 1997 61-71. 54. Gebhardt F, Smalla K. Transformation of Acinetobacter sp. strain BD413 by transgenic sugar beet DNA. Appl Environ Microbiol 1998; 64:1550-1554.
CHAPTER 3
Extraction and Analysis of Microbial Community Nucleic Acids from Environmental Matrices Jan Dirk van Elsas, Kornelia Smalla, Christoph C. Tebbe
3.1. Introduction
E
nvironmental monitoring on the basis of nucleic acids is increasingly being recognized as an extremely powerful approach, since organisms or genes can be directly assessed, even without prior cultivation. Hence, targets present in unculturable, poorly-culturable or as yet uncultured organisms, which would escape detection when using traditional cultivation-based approaches, are assessable. In the last decade, a number of developments, including the rapid development of nucleic acid detection methodologies, have provided a great thrust to the efforts to assess microbes directly in their natural environment. Areas of study that have been significantly stimulated by nucleic acid based approaches are: 1. Monitoring indigenous microorganisms of interest from an ecological or biotechnological perspective, 2. The study of natural microbial diversity and of factors that disturb that diversity, 3. The need to monitor genetically modified microorganisms (GMMs) based on their unique nucleic acid sequences, 4. The assessment of the expression of specific microbial genes in the environment. The environmental matrices to be sampled and extracted may range from a variety of bulk soils, plant roots (rhizospheres and/or rhizoplanes), leaves (phyllosphere) or interior plant tissue, seeds, rockwool and manure to diverse aquatic systems such as sediments and sewages. A large and diverse suite of protocols for the extraction and analysis of nucleic acids from these environments has been collected in recent texts,1,2 and the reader is referred to these for detailed information. The basic principles of these protocols are inherently very similar, as in most cases the nucleic acids are to be obtained from mixed microbial communities that occur adsorbed to, and heterogeneously dispersed in, the matrix under study. In addition, there are often compelling reasons, e.g., when the persistence of a specific target gene has to be monitored, to also analyze the fractions of the total nucleic acid pool that occur extracellularly.3 There are two different approaches to the extraction of nucleic acids from mixed microbial communities in environmental matrices. The first approach is based on the prior separation of microbial cells from the matrix, after which the dislodged cells are lysed and the nucleic acids extracted and further purified (Cell extraction / nucleic acid extraction, or Tracking Genetically-Engineered Microorganisms, edited by Janet K. Jansson, Jan Dirk van Elsas, Mark J. Bailey. ©2000 EUREKAH.COM.
Tracking Genetically-Engineered Microorganisms
30
indirect, approach4,5). The second approach is based on the direct lysis of microbial cells in the environmental matrix (e.g., soil), followed by separation of the nucleic acids from the matrix and from cell debris and other impurities (Direct lysis approach6). Major differences between the two strategies are the higher nucleic acid yields obtained with the direct lysis approach, coupled to the co-extraction of larger amounts of contaminating substances7. Moreover, the cell extraction/nucleic acid extraction approach in principle allows the removal of a large fraction of the extracellular nucleic acids from the bacterial cells prior to lysis, thus allowing a better assessment of target DNA present inside the microbial cells in the environment. Since these pioneering studies on DNA extraction from soil,4-7 there has been a considerable methodological development, the main purpose of which was the omission of laborious purification steps, mainly hydroxyapatite column chromatography and cesium chloride (CsCl) gradient purifications, replacing these by faster approaches. Thus, the numerous nucleic acid extraction protocols that are currently in use in different laboratories1-2,8-19 all share a relatively small number of individual extraction and purification steps (Table 3.1).
Table 3.1. Some examples of frequently used steps in nucleic acid extraction and purification protocols Purpose
Step
Principle
Remarks
Cell lysis
Enzymes and detergents
Breakdown and solubilization of cell envelope components
Very diverse requirements of different cells (e.g., grampositives versus gramnegatives.
Freeze/thaw (heat and cold shocks)
Temperature shocks combined with water crystals, to destabilize membranes
Less efficient for lysis of grampositive bacteria
Grinding with liquid N2
Abrasive action of grinding Efficient for fungal with soil combined with spores and ice crystals mycelium
Bead beating using small glass beads and high frequency shaking
Mechanical lysis (brute force)
Recognized as highly efficient in lysing a wide range of bacterial and fungal/yeast cells
Microwave oven
Heat induced lysis
Combined with other lysis methods
Sonication
High energy induced lysis
Often not efficient if energy-dissipating materials are present
Extraction and Analysis of Nucleic Acids
31
Purpose
Step
Principle
Remarks
Extraction and precipitation
Phenol
Denaturing and extractive action on proteins and lipoproteins
Standard method in molecular biology
Chloroform
Denaturing action on proteins and hydrophobes
Standard method in molecular biology
Ethanol or isopropanol precipitations
Removal of salts and solutes
Standard method in molecular biology
Polyethylene glycol (PEG) precipitation
Precipitation/concentration of DNA
CsCl precipitation
Removal of impurities by salting-out effect
KAc/NH4Cl precipitations
Precipitation of DNA due to high molarity acetate
Glassmilk sorption
Sorption on glassmilk beads, followed by differential desorption
Highly efficient in removing humic compounds from DNA
Elutip D
Chromatography separation
Method repeated on same extract
Wizard DNA cleanup spin columns
Powerful separation of DNA from humics via chromatography over mini spin column
Sephadex G50/G75/G200
Separation of contaminants, e.g., humics, via gel filtration
Efficient fast method, often combined with other methods
Gel electrophoresis
Charge- and size-related separation of nucleic acids from impurities
Very efficient, but laborious method
PVPP* sorption
Selectively removes humics from DNA/RNA solutions
PVPP needs rigorous acid wash
Hydroxy apatite chromatography
Selective binding of nucleic acids to HAP**, column. Differential elution of DNA or RNA by varying phosphate concentrations
Theoretically very good, but practically difficult. Often low recoveries
Purification
* PVPP: polyvinyl poly pyrrolidine;** HAP: hydroxyapatite
32
Tracking Genetically-Engineered Microorganisms
Fig. 3.1. Outline of nucleic acid based detection protocols
There have even been efforts to simplify and miniaturize soil DNA extraction protocols to a level where their on site use becomes feasible.20 Most of the current protocols have been shown to produce DNA and/or RNA suitable for the analysis of microbial diversity or microbial fate. However, they often differ in the way they release and lyse microbial cells from the environmental matrix, and such (qualitative and quantitative) differences are likely to affect the final analyses performed. Hence, it is key to our understanding of microorganisms in their natural settings as described by molecular methods, that the possible biases introduced by cell extraction and lysis methods are understood. This chapter will review currently available strategies to recover and purify (1) microbial (bacterial) cells and (2) nucleic acids (DNA and RNA) from environmental matrices, and will then briefly address the use of these nucleic acids in monitoring methods to assess
Extraction and Analysis of Nucleic Acids
33
microbial diversity and inoculant fate. Figure 3.1 gives a general outline of these methodologies.
3.2. Extraction of Microbial Cells from Environmental Matrices Recovery and concentration of microbial cells may be an important first step if nucleic acid analysis is to be performed in environments with relatively low cell densities, such as aquatic or phyllosphere habitats. Moreover, even for environments with high population densities, it can be advantageous to prepare a cell fraction prior to nucleic acid extraction, in particular if intracellular targets are to be assessed. Bacterial diversity assessments based on DNA reassociation kinetics21 even depend on the DNA being primarily of bacterial origin. Paul recently reviewed the available methods for cell concentration from aquatic environments;22 a variety of approaches has been used, the most effective being those including the filtration of large volumes through membrane filters.23-25 Tangential flow filtration26 or Vortex flow filtration27 have the advantage that cells experience less mechanical stress and that large volumes (up to 100 L) can be processed within short times. Prefiltration through 3 µm filters can be used to remove large particles which would clog filters.26 Alternatively, high-speed centrifugation is applicable for concentrating bacteria in smaller water volumes. Filters with microbial biomass or bacterial pellets obtained after highspeed centrifugation can be stored frozen until further processing. As most bacterial cells in nature, including aquatic environments, occur attached to surfaces (forming microcolonies or biofilms28), cell dislodgement methods are often required. Cells can actually adhere quite strongly to surfaces by bonding mechanisms such as via bacterial polymers, pili or flagellae, electrostatic forces or water bridging.29-31 Bacteria can also be entrapped in soil aggregates which are formed through gluing by bacteriallyproduced polysaccharides and physico-chemical interactions between silica/clay surfaces and decomposed organic matter.32, 33 The representative extraction of surface-attached bacteria from environmental matrices requires that the cells bound by the various modes and with different strengths are efficiently dislodged. Dissociation of cells from surfaces is generally achieved by repeated homogenization steps. For soil, homogenization can be achieved by shaking soil suspensions with gravel or beads, or by blending in Stomacher or Waring blenders.34 Mild ultrasonication in a low energy bath has also been used.29 However, the amount of energy needed to completely disperse soil aggregates can result in considerable cell death.29,35 During extraction, bacterial cells experience not only mechanical stress but also changes in their physico-chemical conditions. Thus, the physiological state of cells following dislodgment from surfaces, reflected in the diversity of intracellular RNA molecules, might not represent their in situ physiological state. Lindahl et al36 found that the activity of extracted bacterial fractions is often lower than that in soil slurries. Furthermore, Priemé et al31 reported that treatment of soil samples in a Waring blender decreased methane oxidation activity, with a profound difference between different soils. Soil slurries in sodium pyrophosphate showed less than 10% of the methane oxidation observed with soils resuspended in water. Furthermore, the sodium pyrophosphate used might be problematic in microbiological incubations due to the enhanced supply of phosphorus.33 Following dislodgment, separation of bacterial cells from the particulate matter is usually achieved by low-speed centrifugation, with their subsequent recovery in a pellet by high-speed centrifugation (differential centrifugation37). Recent studies revealed that the centrifugal force applied is highly critical;38 centrifugal forces over 500 xg reduced cell recoveries dramatically. The use of forces < 100 xg was therefore recommended, but at these reduced speeds, recovery rates did not exceed 45% of the total discernable cells.38
34
Tracking Genetically-Engineered Microorganisms
Fig. 3.2. A protocol for the recovery of bacterial cells from soil.
An alternative method to disperse soil particles and dissociate microbial cells from soil, sediment or root parts involves the use of cation exchange resins. Shaking of soil with, for instance, Dowex39 or Chelex-10029,40,41 is used to remove the bivalent and polyvalent cations responsible for electrostatic bonding between like-charged bacterial cells and soil particles. Detergents are also used to overcome adhesive interactions. A comparison of five different treatments (Fig. 3.2) showed that cell extraction could be improved by using Stomacher blending instead of shaking. Consistent results and a fairly rapid treatment were possible with the automated paddle action of the Stomacher. On the other hand, Lindahl and Bakken42 did not find any positive effect of the Chelex-100 treatment on cell extraction efficiency and, thus, recommended simple, threefold repeated, blending with water. Shaking in lowelectrolyte concentrations, e.g. in distilled water, increases the interactive free energy between like-charged soil particles. In a recent comparison of both methods with agricultural soil, the total cfu numbers obtained were found to be comparable between the methods (unpublished). However, the water-based protocol yielded a higher number of different colony types, suggesting that the extraction protocol strongly affects the diversity of bacterial types obtained. In particular for soils with high clay contents, separation of bacterial cells and soil particles is necessary. This can be achieved by flotation in the density media Percoll or
Extraction and Analysis of Nucleic Acids
35
Nycodenz,31,43 but not with simple centrifugation steps, because clay particles and bacterial cells show similar sedimentation behavior. The efficiency of different cell extraction protocols thus depends on the soil type; hence, different protocols may prove suitable for different soils.43 However, even with the most optimized protocol, complete extraction of all bacterial cells, in particular of cells bound to soil particles, is probably impossible. Thus, for studies on the diversity of microbial communities in soil, it seems reasonable that the cells recovered represent, in their relative abundance, the surface-attached microbial community. As microbial cells may occur both at the outside of soil aggregates and in the interior regions, the extent to which these soil aggregates are disrupted will determine the sites from which the inhabiting bacterial cells are dislodged. To monitor the population dynamics of bacterial inoculants, it is, thus, primordial to understand their localization, as the protocol to be used and the limit of detection are affected by it. Moreover, inoculant cells may preferentially occur at different locations than indigenous microbes, and hence the requirements with respect to extraction are different. The bacterial cell fractions obtained can be used for the extraction of genomic DNA4,5 or for the parallel extraction of both DNA and RNA (Fig. 3.1).44,45 Furthermore, the cell fractions can serve for assessments of cell numbers using fluorescent dyes or immunofluorescence enumeration. In general, nucleic acids recovered from soil/rhizosphere bacterial cell fractions are less contaminated with coextracted humic acids, fulvic acids, polyphenols, polysaccharides, or other plant-derived substances which can hinder molecular analyses, than these recovered directly.7 For polluted soils, separation of bacterial cell fractions may even be an absolute requirement. For instance, DNA extracted directly from a zinc-contaminated soil was not PCR amplifiable even after several purification steps, whereas DNA extracted from the recovered bacterial fraction was amplifiable without any problems (Brim et al, unpublished).
3.3 Cell Disruption The aim of the cell disruption step is to lyse as many target microbial cells as possible, since any subsequent analysis on the basis of nucleic acids is greatly sensitized if this step is optimized. The lysis protocol can be targeted towards a specific microbial group or to the total microbial community. Unfortunately, cell lysis is often the main limiting step in nucleic acid extraction protocols, even of pure cultures.46 Due to the enormous differences in lysability of cells (cf. easily lysed enterobacteriaceae or members of the genus Pseudomonas versus recalcitrant types such as Bacillus spores or mycobacteria), different preferred lysis protocols have been concocted. Moore et al 46 summarized the different available methods for a range of bacteria and fungi, and suggested that each microbial group should be tackled by a particular choice or combination of enzymatic, detergent-based and mechanical methods, the aim clearly being the generation of high nucleic acid yields of optimal quality (molecular size and purity). Cell lysis in the presence of an environmental matrix is different from that without it, and is often more difficult, since compounds from the matrix can affect the action of the lysing agents used, and cells can be in a physiological/morphological state that makes them refractory to lysis.47 For example, the presence of soil particles can inhibit the action of lytic enzymes due to effects on pH, ionic strength or to simple adsorption, but enhance the (mechanical) action of mortar/pestle grinding in the presence of liquid nitrogen, due to their abrasive action.48,49 Moreover, it is possible that certain sites in soil are not reached by lytic enzymes, resulting in a lack of lysis in these specific sites. It is, therefore, likely that lysis efficiencies and possible biases are different for lysis steps applied to pre-separated bacterial fractions as opposed to those of cells in the presence of their natural matrix.
36
Tracking Genetically-Engineered Microorganisms
The strategies used in most protocols to achieve lysis of bacterial cells from environmental matrices, either in its presence or absence, are: 1. Enzymatic removal of cell wall material, 2. Chemical action such as solubilization of the cell membrane with detergents, 3. Physical action such as freezing/thawing, ultrasonication or microwave oven treatment, and 4. Mechanical action such as achieved via e.g., bead beating or mortar/pestle grinding. Often, some of these strategies are combined. Key aspects are described below: 1. A range of enzymes that attack different cell wall components can be applied, such as proteinase K, lysozyme, mutanolysin, lysostaphin, subtilisin or achromopeptidase.46 These enzymes are more effective when combined with EDTA. 2. Commonly used detergents are sodium dodecyl sulfate (SDS) and N-lauroylsarcosine (Sarcosyl). Cetyltrimethyl ammonium bromide (CTAB) is also often used. Nonpolar detergents, such as Triton X, Tween or Nonidet P-40, which provide for milder treatments, are less common. 3. Physical methods have mostly been combined with other (enzymatic or mechanical) methods, as there is doubt whether their single use will result in acceptable levels of lysis.15,20 For instance, the application of freeze/thaw steps, even repeatedly, has been shown to be inferior to bead beating.15,20 Moreover, it is difficult to achieve high lysis rates by the single use of ultrasonication of soil slurries. 4. Of particular interest is the use of the bead beater (Braun cell homogenizer), which is able to lyse even very recalcitrant cellular forms such as Bacillus spores, mycobacteria or fungal conidia.20,50,51 This method was proposed in a pioneering paper on direct extraction of soil DNA7 and is still widely in use. Furthermore, a method in which the abrasive action of mortar/pestle grinding was combined with liquid nitrogen snap-freezing was shown to be efficient in releasing fungal DNA.48,49,52 Table 3.1 lists the most o c mmonly used steps of popular protocols. Combinations of these approaches have also been used. For instance, Picard et al53 have shown that a combination of ultrasonication, microwave oven and enzymatical treatment resulted in a higher degree of cell lysis and thus DNA yield from soil, than any of these steps performed in separate. However, DNA shearing was a severe problem. Problems with all these approaches are related to either the uneven distribution of microbial cells throughout environmental matrices, resulting in their uneven exposure to the action of lysis agents, or to differences in the resistance of different microbial types to lysis. It is therefore prudent to state that complete lysis of cells in environmental matrices is most often impossible to achieve. Hence, the data obtained on the basis of environmental DNA (and/or RNA) should be regarded as descriptive of the populations recovered in a relative sense, and rigorous checks on the nature of the possible bias introduced may be necessary.
3.4. Extraction and Purification of DNA 3.4.1. Extraction Generally, the aim of the extraction steps is to quickly separate the microbial DNA from contaminating compounds such as humic acids, fulvic acids, polyphenols, polysaccharides, enzymes (in particular DNAses) and cellular debris. Protocols for pure culture extractions, although similarly structured,46 often do not deal with compounds that abound in environmental extracts, and these protocols are therefore not a priori suitable. There are a limited number of physico-chemical strategies to quickly remove contaminating compounds, which might eventually be combined into a standardized protocol. However, a wide
Extraction and Analysis of Nucleic Acids
37
range of protocols for extraction of environmental nucleic acids is currently still in use.1,2 The main strategy is based on organic solvents which interact with the hydrophobic parts of proteins and lipoproteins, resulting in their denaturation and extraction. Using, for instance, phenol—or chloroform—water phase separations, many proteins, lipoproteins and other hydrophobic compounds concentrate in the organic phase, whereas nucleic acids will concentrate in the water phase. Phenol is known to be efficient in denaturing and extracting proteins, whereas chloroform interacts with proteins and polysaccharidic material. Hence, a combination of these two extractants is often employed. Chloroform also removes traces of phenol still present in the aquatic phase. In addition to phenol/chloroform extractions, ethanol or isopropanol precipitations of DNA, followed by washes, are often used to remove salts, SDS and other impurities.54 The solution produced in these initial steps, called the crude extract, will often be a rather impure aqueous solution of nucleic acids. DNA and RNA show similar behavior and may be both present in these crude extracts.
3.4.2. Purification The aim of purification of the crude extract is to recover the nucleic acids from the crude extract in a form ready for analyses by appropriate molecular techniques. Ideally, the procedure is as rapid and simple as possible, and incurs minimal quantitative and/or qualitative loss of, or damage to, the nucleic acids. The different protocols currently in use in different laboratories have been based on an array of different steps in various combinations. Table 3.1 presents a summary of purification methods employed in selected protocols. There is ample evidence that the requirements, with respect to DNA purity, for restriction by different enzymes, cloning, PCR amplification, reverse transcription or direct hybridization can be quite different. Moreover, different enzymes, e.g., thermostable DNA polymerases, have different requirements as to DNA purity.14,55 Therefore, for each new experimental system, the extent to which nucleic acid purification is needed has to be carefully established and controlled. However, a few “trends” in the purification of environmental DNA are worth mentioning. The powerful purification steps used in the early protocols, such as CsCl gradients5 and hydroxyapatite chromatography,4,30 have been found to be either very tedious or unpredictable with respect to yields. Gel electrophoresis has been shown to offer a powerful (one-step) alternative strategy to obtain DNA pure enough for molecular analyses via PCR.18,19,56, 57 Young et al58 even used polyvinylpolypyrrolidone in their gels to enhance the selective removal of humics. However, gel electrophoresis may lead to a bias when the DNA is subsequently used for PCR amplification and community fingerprinting.58 Moreover, the method can be tedious, and has therefore been superseded by other approaches. Thus, there has been an extensive search for reliable alternative purification methods that were simple, fast and provided high throughput.8-12,15-19 Often, these protocols relied on a sequence of short, different, treatments, including e.g., KAc or NH4Ac precipitations,8,11 CTAB extraction,10 hydroxyapatite mini-spincolumns12 and Sephadex gel filtration.8,12,56,59,60 One rapid protocol that consistently yielded PCR amplifiable and restrictable DNA from different soils, originally developed by Smalla et al,15 was based on a two- or three-step purification consisting of sequential KAc precipitation, CsCl precipitation and (originally) glass milk or Wizard spin column purification. In later work, it was shown that this protocol was very flexible and adaptable to a wide range of soil types.61 In a parallel study, Zhou et al 62 also described a protocol which contained four flexible purification routines applicable to a range of different soils. As previously mentioned, a recent development aimed at the on site extraction of nucleic acids from soil. A very simple one-step purification over a Sephadex G-200 column was
38
Tracking Genetically-Engineered Microorganisms
found to yield DNA sufficiently pure for PCR amplification and detection of key microbial groups.20 However, it is doubtful the DNA obtained was of a quality similar to that obtained by more rigorous protocols.
3.5. Analysis of DNA and Detection of Specific Sequences Commonly, the quantity and quality of extracted environmental DNA is analyzed by standard methods, such as absorbance at 260 nm in the spectrophotometer or gel electrophoresis.1,2,54 However, due to the presence of coabsorbing compounds (humic acids) in most nucleic acid extracts,14,15,20 direct spectophotometry is not recommended. A solution is offered by DNA-intercalating compounds such as Hoechst dye 33258, which results in DNA absorbance at different wavelengths.2,11,20 Gel electrophoresis, on the other hand, is often the method of choice as it allows the direct estimation of DNA quantity and quality (degree of shearing, presence of humics). Extracted DNA can be used directly for analysis, or it may be separated into fractions, which are based on, for instance, molecular size or on relative G+C content. To enhance successful detection of a released GMM, van Elsas et al56 isolated the 2-23 kb fraction of their soil DNA, as the specific targets were expected to be prevalent in this fraction. Nusslein and Tiedje63 succeeded in separating soil DNA into high-G+C (63%) and low-G+C (35%) fractions, after which clones generated via PCR with these fractions were sequenced. The former fraction was dominated by Pseudomonas, Rhizobium-Agrobacterium and Rhodospirillum types, whereas the latter had a dominance of Clostridium sequences. Detection of specific sequences in purified DNA extracts can proceed by a number of different strategies, i.e., 1. direct hybridization with a specific probe, 2. DNA labeling and use in probing (reverse sample probing), 3. direct restriction, followed by analysis on an agarose gel and/or cloning and 4. PCR amplification followed by molecular analysis. These analyses and their intricacies are summarized hereunder. 1. Direct hybridization. To directly assess the presence and relative abundance of target sequences in the environment studied, the environmental DNA can be hybridized with labeled probes for these targets, in dilution dot blot or even Southern setups.54,64 For the analysis of target abundancy, calibration of the signals, e.g. via the use of target DNA added in known dilutions, is needed. An advantage of direct hybridization is that it is independent from amplication techniques. Moreover, it allows the direct assessment of rearrangements in the genes of released organisms.65 However, a major disadvantage is its low sensitivity. For an average soil with 108-109 cells per g, it is often difficult to detect targets present at levels below 105 per g. 2. DNA labeling and use in probing. Applications of environmental DNA, in particular DNA from oil fields, include its use as a probe to assess the prevalence of specific targets, in a reverse hybridization setup coined reverse sample probing.66 For this purpose, the DNA should be of sufficient purity to allow (enzymatic) labeling and subsequent hybridization. 3. Direct restriction and cloning. Commonly, restriction enzyme digestion and cloning are performed on previously amplified DNA. However there might be instances in which it is important to obtain a bank of environmental fragments, in particular when the potential biases introduced by PCR are to be bypassed. For that purpose, the DNA should be amenable to cutting with common enzymes, to allow cloning. 4. PCR amplification. The vast majority of analyses performed with environmental DNA are based on the use of PCR amplification, since PCR offers the advantage that the targets, even when present as minority sequences, can be quickly amplified
Extraction and Analysis of Nucleic Acids
39
to easily detectable or clonable quantities. The potential of this approach is tremendous, and it has revolutionized molecular microbial ecology. In accordance with primer choice, specific target organisms or genes can be detected and quantified,50-51 or broader groups can be fingerprinted by techniques such as denaturing or temperature gradient gel electrophoresis (D/TGGE),67,68 terminal restriction fragment length polymorphism (T-RFLP),69 single strand conformational polymorphism (SSCP)70 or amplified ribosomal DNA restriction analysis (ARDRA). This field is currently exploding, with new applications being reported almost monthly. However, due to problems inherent to mixed community PCR,71 the real value of the resulting fingerprints for actual in situ microbial diversity remains to be assessed. Furthermore, an important step forward in the analysis of D/TGGE profiles is the use of probes based on the variable region 6 (V6 probes) of the 16S rDNA.72 This highly variable region allows for the generation of highly specific probes which can serve to identify bacterial types in gels, or to link the bands from D/TGGE gels to either isolates or cloned 16S community amplicons.
3.6. Extraction and Purification of RNA In contrast to DNA, which serves as a pool of genetic information, RNA has multiple cellular functions. Generally, three classes of RNA can be distinguished, i.e., messenger (m)RNA, ribosomal (r)RNA and transfer (t)RNA. mRNA molecules are transcribed from genes during gene expression. These transcripts are translated into amino acid sequences at ribosomes, which are made up of rRNA molecules and proteins. tRNA molecules serve as carriers for amino acids in this translation process in protein biosynthesis at the ribosomal sites. In microbial ecology, all three classes of RNA have been targeted to characterize structures or functions of microbial communities. Additionally, RNA can be present in the environment in the form of viral genomes. Protocols for the extraction and detection of viral RNA from environmental samples are available73-76 and will not be discussed further in this context. RNA extraction and purification from environmental matrices follow the same lines described for DNA extractions. However, due to the high abundance and persistence of RNases in the environment, RNA extractions generally require more precautions than those of DNA. The use of RNase-inhibiting compounds, like diethylpyrocarbonate (DEPC), chaotropic RNA stabilizing reagent or SDS to inactivate proteins can help to increase extraction efficiencies from environmental samples.78,79 Protocols have been developed to simultaneously obtain different types of RNA or even both RNAs and DNA from environmental samples,6,44,45,80 whereas other protocols aimed at extracting specific RNAs.78 Similar to DNA (see above; Table 3.1), recently developed RNA extraction protocols take advantage of commercially available nucleic acid extraction and purification kits, thereby replacing time- and material-consuming purification steps like ultracentrifugation or dialysis. Limitations of existing protocols are correlated with RNA instability (especially prokaryotic mRNA), and with the co-extraction of contaminating substances, mainly DNA or humic acids. In this regard, soil or sediment samples are more laborious for purification and less sensitive for detection compared to samples of aquatic origin. Therefore, it is not surprising that, in early work, the detection of bacterial transcripts was shown to be several orders of magnitude more sensitive in marine environments81 than in soil.59, 82 Various strategies can be used to obtain suitable material for rRNA analysis, i.e. direct or indirect (cell extraction first) extraction of RNA from environmental samples, or isolation of ribosomes. These approaches have been successfully applied for 16S rRNA based studies. For instance, using analyses based on direct RNA extraction, Hahn et al83 were able to detect poorly culturable Frankia sp. in soil. Felske et al84 characterized the bacterial
40
Tracking Genetically-Engineered Microorganisms
community of a grassland soil on the basis of rRNA obtained from soil-extracted ribosomes. Duarte et al44 generated profiles of soil bacterial communities using reverse transcription and PCR amplification of RNA extracted from the bacterial fraction. The RNA obtained from pre-extracted cells or ribosomes is likely to be less contaminated with coextracted material like humic acids.44,85 However, recent progress in optimizing PCR efficiencies even in the presence of a substantial amount of contaminating humic acids by a considerate selection of heat-stable DNA polymerases and additives like single strand stabilizing proteins, suggests that partially purified RNA might be good targets for RT-PCR analysis.14,55,86 Generally the yield of ribosomal RNA has been reported to be higher with direct or indirect extractions than with the ribosome isolation method.44,87 Early protocols to directly extract total RNA from soil could not detect intact ribosomal RNA molecules,59,88,89 but recently a rapid and direct extraction of intact 5S, 16S, 18S, 23S and 28S RNA, which were amplifiable by RT-PCR has been reported.79
3.7. Detection of RNA 3.7.1. Analysis of Gene Expression on the Basis of mRNA Assessments Analysis of mRNA directly extracted from environmental samples is conducted to investigate habitat dependent regulations of gene expression. In eukaryotic organisms, transcribed mRNA molecules are altered by various co- and posttranscriptional modifications such as capping of the 5' end and polyadenylation of the 3'-end.90 These modifications increase the stability of the molecules to half-life values of several hours. The poly-A 3'-end is a suitable target for the isolation of eukaryotic transcripts by poly-T hybridization using commercially available matrices. In particular, poly-T-coated magnetic beads have been found useful in this respect. Tebbe et al91 extracted mRNA from yeast cells (Saccharomyces cerevisiae, Pichia angusta) in soil by a direct approach, hybridizing poly-T magnetic beads in soil slurries, previously treated for total cell lysis. Transcripts from 10 cells per g soil were detectable after reverse transcription of mRNA and subsequent amplification by PCR. The expression of a recombinant gene was found to become extinct before elimination of the organisms from the environment. A similar polyA-polyT hybridization protocol was developed for the analysis of specific gene expression (e.g. lignin peroxidases) of the white-rot fungus Phanerochaete crysosporium in soil.92-94 In contrast to eukaryotic mRNA, bacterial mRNAs have half-life values in the range of only 0.5-30 min.95 Also, they lack a common target region like the poly-A 3’-end. In order to detect transcripts of biodegradative genes (nahAB transcripts) and the mercury reductase gene merA by gene probe hybridization, over 107 target cells had to be present per g of soil.59,82 Enhanced sensitivity (approximately 2 orders of magnitude) in the detection of bacterial gene expression was achieved by Fleming et al96 who protected specific mRNAs of the napthalene degradation encoding nahA gene by hybridization with antisense RNA in a ribonuclease protection assay. Target cells can also be extracted from soil and gene expression can be analyzed by whole-cell hybridization with digoxigenin-labeled probes. This approach has been used to detect the expression of a protease gene by Bacillus megaterium in soil. The detection limits, however, were above 106 cells g-1 soil.97 Moreover, as indicated before, cells upon extraction from soil may change their physiological status and hence their pattern of gene expression does not necessarily reflect that in situ. Thus, the detection limits for analysis of bacterial gene expression in soil are still several orders of magnitude above the sensitivity desired for most ecological studies. To date, the use of recombinant reporter genes (Chapters 5-7) represents a more sensitive approach to study bacterial gene expression in soil.98,99
Extraction and Analysis of Nucleic Acids
41
In aquatic samples, the problem of low sensitivity can be alleviated by concentrating bacterial cells prior to RNA extraction.100 In a pioneering study,81 106 cells (concentrated from 100 ml seawater) were necessary to detect the expression of the plasmid-encoded neomycin phosphotransferase gene (nptII) by Vibrio sp. Detection was by hybridization of target mRNA with single-stranded RNA probes. Similar detection limits were observed in studies on the expression of merA by Pseudomonas aeruginosa and microbial communities in lake water.101,102 Quantification of mRNA via direct hybridization or quantitative PCR will be discussed further under section 3.8, below. Differential display (DD) is a PCR-based method which allows to generate characteristic patterns of expressed genes in an organism without a priori sequence information. Recently, this technique has been applied to analyze prokaryotic mRNA following extraction from soil. The expression of a gene (todC1) involved in the degradation of toluene by an inoculated Pseudomonas putida in soil could be demonstrated.103 Additionally, gene expression of the soil microbial community, triggered by the addition of toluene was detected. The DD-technique has the potential to characterize responses of natural microbial communities to, for instance, stress and can eventually help to identify new genes and enzymes of environmental significance.
3.7.2. rRNA-Characterization of Growing Cells in Microbial Communities Analysis of rRNA has become a major technique in the characterization of microbial activities and community structures in the environment.104-106 The various rRNA types contain regions that are conserved among all living organisms as well as regions characteristic for their phylogenetic individuality, offering both targets for PCR and markers for differentiation (Chapter 4). Analysis of rRNA is often preferred over that of DNA, since the number of ribosomes and, thus, rRNA, correlates with the growth rate for a number of bacteria. 107109 Hence, for these types, rRNA analysis would mainly include active organisms and not non-viable or dormant cells. However, other bacterial groups do not seem to shift their ribosome numbers up and down in accordance with their growth rate. Furthermore, the presence of multiple rRNA targets per cell enhances the sensitivity of detection compared to DNA-based detection. Finally, compared to whole genomes, the diversity of sequences is dramatically reduced, and less diverse sequences might be less prone to non-specific primer binding. However, this point is open for debate.110 Using domain-specific gene probes, Ogram et al89 found that rRNA directly extracted from sediment was mainly of bacterial, archaeal and eukaryotic origin. To obtain sufficient numbers of target sequences for the analysis of variable sequences, regions were amplified by PCR using primers which bind to highly conserved sites.111 Such PCR-mediated analysis of rRNA is possible at the DNA level or directly at the RNA level. If RNA is the template, reverse transcription is necessary prior to PCR. Most environmental studies on microbial community structures have focussed on 16S or 18S rRNA, but other regions may become more important during the next years, e.g. the bacterial 23S rRNA112 and the internally transcribed spacer (ITS) regions.113,114 The comparison of 16S or 18S rRNA PCR products generated with community RNA and DNA as templates might provide insight in the ratio of active (growing) and inactive cells in particular environments such as soil.44 Using denaturing or temperature gradient gel electrophoresis (D/TGGE) or single strand conformation polymorphism (SSCP), the intensity of such products can be visualized and compared.44,67,70 Significant differences can then be characterized by DNA sequencing. RNA and DNA based characterizations of fecal communities were similar,115 suggesting that due to the high nutrient content of fecal material, the dominating microorganisms in this system were probably actively growing. In environments with large numbers of inactive cells like bulk soil, however, differences between
42
Tracking Genetically-Engineered Microorganisms
rRNA and DNA based techniques can be more significant, as shown by Duarte et al.44 DGGE analysis of PCR or RT-PCR products generated with either DNA or RNA from the same bacterial fraction showed that, next to similarities in the community profiles, there were clear dissimilarities, suggesting that there were differences in the activity levels between the various bacterial groups underlying the profiles.
3.8. Quantification of Specific Targets in Environmental Nucleic Acids Specific targets in environmental DNA or RNA can be directly quantified by hybridization in a dot blot setup, using careful calibration with a dilution range of the target in the same background.64 Among numerous other applications, the fate in soil of a genetically marked self-transmissible plasmid, RP4, has thus been successfully monitored.56 Quantification of specific mRNA can also be achieved by hybridization with a single-stranded RNA probe. To assess the level of gene expression, the amount of mRNA should be normalized to the gene dose, i.e., the number of genes present in the DNA extracted from an environmental sample. Such an approach has been successfully used by Pichard and Paul116 to study the temperature-dependent expression of a biodegradation gene (xylE) of Vibrio sp. in seawater. However, due to the relative insensitivity of common hybridization protocols,54 probing methods are generally restricted to the assessment of relatively high target numbers present in the sample. Hybridization-based quantification has, thus, been superseeded by PCR- or RT-PCR-based quantitative methods. Quantification via PCR, eventually preceded by a reverse transcription step of mRNA, can be achieved if a relationship between the number of target molecules obtained in the amplification product and the original target number can be established. Several different procedures have been cogitated and applied,117 of which the most important ones are (1) Most-probable-number PCR (MPN-PCR), and (2) Competitive PCR using an internal standard. Other approaches, such as direct quantification,118 quantification by comparison to an external standard or by comparison to a co-amplicon, analysis of PCR kinetics and molecular beacon PCR (in which a fluorescent molecule is formed per successful amplicon produced in the PCR) have also been proposed. These later applications have either met with problems when applied to environmental samples or have found little application yet, and will therefore not be further discussed.
3.8.1. MPN-PCR The principle of MPN-PCR is similar to that in other MPN enumeration procedures. Briefly, the sample material (extract) is serially diluted and amplified, in a number of replicates, to a level where detection is not possible anymore (outdilution). Theoretically, this would be the case at the point of complete removal of all target sequences from the PCR reaction mix. However, in practice the cutoff points can be slightly higher due to inefficiencies in PCR amplification of targets in environmental DNA. The data of all amplification reactions are recorded, and the cutoff levels are determined in the replicates. A table based on statistical principles will then indicate the most probable number of virtual amplifiable targets (VAT) in the dilution assessed, and, thus, in the sample. If the minimal number of targets amplifiable under the conditions used equals 1, then the VAT equals the actual amplifiable numbers; if there is a discrepancy, a compensation factor should be included in the calculations. Nesme et al 119 successfully used MPN-PCR to quantify the number of pathogenic Agrobacterium sp. strains in soils. MPN-PCR has further been employed, for instance, to assess the numbers of targets of Mycobacterium chlorophenolicum, a pentachlorophenoldegrading bacterium, in soil.61 The method was specific and provided positive detection of
Extraction and Analysis of Nucleic Acids
43
the target down to about 103 targets per g of soil. In addition, the fate of introduced Paenibacillus azotofixans vegetative cells and spores in soil and wheat rhizosphere could be successfully monitored in microcosms using specific MPN-PCR.51 However, an important drawback of MPN-PCR is the excessive number of replicate PCR reactions needed, as well as the careful controls that are required for PCR efficiency. This makes the method rather laborious and expensive. MPN-PCR has now been superseeded by competive PCR methods as discussed below.
3.8.2. Competitive PCR Competitive PCR (cPCR) is based on the principle of co-amplification with the same primers, at presumably similar rates, of known amounts of an easily recognizable added indicator (competitor) molecule with the actual target nucleic acid in the sample. To obtain comparable amplification rates between target and competitor, both the sizes and sequences of the two products should not be widely divergent. Moreover, control of PCR conditions (rate and extent of amplification) is required to avoid biases due to effects of primer:product annealing competition.120 Jansson and Leser117 reviewed the intricacies of competitive PCR, and the reader is referred to this paper for detailed information. In a common competitive PCR assay, a set of reactions is set up with varying amounts of competitor DNA added to the environmental extract containing an unknown amount of the target. Following competitive PCR, the number of targets in the sample can be inferred from the PCR reaction in which the number of indicator molecules equals the number of specific targets. Alternatively, a standard curve is prepared with a dilution series containing a known number of target DNA molecules and a fixed number of competitor DNA molecules. The ratio of the competitor:target band intensities after PCR amplification is plotted versus the original target number. This simplifies the cPCR approach, since a single sample containing an unknown target DNA concentration can be co-amplified together with the competitor DNA at the fixed concentration used for preparation of the standard curve. The target DNA concentration in the sample can be determined from the ratio competitor:target products by interpolation from the standard curve.117,121 There are certain restrictions to the type and size of indicator molecule, as it is absolutely required that amplification rates are similar between competitor and target. The competitor should, for instance, be similar to the target with respects to size, base sequence and flanking sequences. Suitable competitors are artificially constructed or natural DNA fragments of similar size and with similar primer annealing sites but different internal sequence, which are separable on denaturing gradients. For 16S rDNA sequences, competitors can be easily generated via low-stringency PCR with heterologous templates, yielding molecules with similar size yet different sequence to the target. Also, small deletions or insertions can be introduced into the target region, in order to obtain an indicator which is separated by size on an agarose gel.117 Competitive PCR has been successfully applied in studies on the fate of specific bacteria released into the environment. Using amplification of a specific (B13) fragment, Leser et al 122 successfully monitored the decline, as well as the response to a selective agent (4-chlorobenzoate), of the genetically modified Pseudomonas sp. B13 (FR1) in marine microcosms. Also, a competitive quantification system was developed to follow the fate of the pentachlorophenol degrader Sphingomonas chlorophenolica in soil.123 A competitor was fortuitously found when studying sizes of amplicons generated with bacterial primers on different bacterial species, as a product generated with Paenibacillus polymyxa was slightly smaller than the product generated with S. chlorophenolica, while amplification rates were similar. This allowed separation of the two products by electrophoresis through common agarose gels. S. chlorophenolica was thus shown to persist for a long time in pentachlorophenol containing
44
Tracking Genetically-Engineered Microorganisms
soil. cPCR was further found to be a very accurate method for quantitation of a genetically modified cyanobacterium added to Baltic sea sediment.121 In these experiments, the competitor DNA was added to the sediment samples before DNA extraction and PCR amplification in order to account for variations in extraction efficiencies between samples. However, as mentioned, competitive PCR based on amplification of DNA targets does not assess viable cell numbers. Hence, if a focus on active cells rather than total cells is required, the method should be combined with other methodology, viz microscopic assessments of viable cells. The activity (expression) of specific genes can be quantified by using PCR preceded by a reverse transcription step (RT-PCR). This method is very sensitive for the detection of transcripts, as shown with eukaryotic microorganisms;91,92 detection of bacterial gene expression by RT-PCR in activated sludge was possible at a detection threshold of 106 CFU g-1 soil.124 Competitive RT-PCR allows for quantitative determinations of gene expression, as was shown in studies on the expression of peroxidases by Phanerochaete chrysosporium in soil.93,94 Obviously, quantification on the basis of two enzymatic reactions needs a series of controls to compensate for the putative biases of both processes.
3.9. Conclusions and Perspectives for Further Development From a practical perspective, several of the DNA and RNA extraction and analysis methods discussed herein are suitable for the screening of large sample numbers. They are thus useful for the assessment of the fate of GMMs and/or their genes (activity) following introduction into environmental matrices. If required, they also facilitate the detection of naturally occurring DNA or RNA sequences in soil microbes. Due to the current lack of comprehensive data with respect to the suitability of different protocols for different environmental matrices, unfortunately there is no standard nucleic acid protocol that can be recommended for the wide array of environments in which the technology is applicable, not even for soils. However, two recent papers indicated some progress towards a unification of protocols in that amplifiable DNA can be obtained from a range of different soils by the flexible and educated use of different purification routines61,62 On the other hand, real routine and high-throughput use can only be achieved if methods can be kept simple and can be miniaturized or even robotized, as suggested by Kuske et al.20 The great strength of the nucleic acid based detection strategies lies in the fact that direct and cultivation-independent data can be obtained with respect to the numbers (DNAbased strategies) and activities (RNA-based strategies) of microorganisms in complex matrices. The DNA based assessments will often also detect extracellular DNA (the naked genes) as well as DNA from either non-viable, non-culturable, injured or even dead cells. Thus, they can provide a very complete picture of the occurrence of the molecular target under study, which is important when the fate of recombinant genes in the environment is to be monitored. However, it is less relevant to obtain such information when only the viable cells present in the environment are to be targeted. For these studies, DNA-based methods are less suitable, as even with methods that exclusively target microbial cells (carefully controlled for the co-extraction of extracellular DNA), there is no inherent link to viability. Therefore, these methods need a link to molecular or traditional viability assessments, an obvious choice being analyses based on RNA. As a corollary, methods based on RNA suffer less from biases related to the presence of naked DNA, as, due to their presumed rapid decline in most environments, all RNA types tend to reflect cellular activity rather than cellular abundance. Furthermore, even though for instance the bead beater is known to efficiently lyse a major proportion of bacterial species including many gram-positives,50,51 there is no absolute certainty that cell lysis by this method will yield nucleic acid mixtures that are truly representative for the soil bacterial community. For instance, the findings of Moré et al 47
Extraction and Analysis of Nucleic Acids
45
suggest that lysis may well be confined to the larger cell-size fraction of the microbial community, since the numerous minute or dwarf cells present essentially escaped lysis. On the other hand, the nature and significance of these dwarfs is currently under heavy debate, as their putative role in natural environments is blurred. These considerations have to be taken into account when DNA or RNA extraction protocols are to be used for microbial community structure or fate studies in soil. In addition, the majority of extraction protocols not only yield bacterial, but also eukaryotic DNA, which may originate from a variety of source organisms present in the system (e.g., fungi, protozoans, nematodes and/or plants). For quantification purposes, a eubacterial probe is necessary to determine the proportion of bacterial DNA in the total extracts obtained. A major criticism on studies that were exclusively based on environmental DNA, including those that identified novel microbial species by sequencing of cloned 16S ribosomal amplicons, has been the absence of significant evidence for the cellular nature of these sequences. To bridge the gap between the evidence for novel types exclusively on the basis of clone sequences and knowledge obtained from sound microbiological work in which microbial functioning is central, a link to traditional, isolation-based microbiology has been advocated.125 However, another strategy with potential to link the direct molecular information with that of microbial cells can be based on the detection of cells following their reaction with a labeled probe, a process called whole cell hybridization. This procedure has been applied successfully in aquatic environments, but it has met with problems of signal weakness in soils.126 Recently, it was shown that whole cells from the environment can also be used as targets for PCR (“in situ PCR”) or reverse transcription-PCR,127-129 and this approach has a potentially enhanced sensitivity. This method has been successfully applied to aquatic systems, whereas its application to soil is still awaiting. Both methods have clear potential as complementary tools to support findings obtained on the basis of the extractive protocols. At this point in time, a major drawback may still be their sensitivity to false positive results, as well as the limitations with respect to minimal cell densities needed for successful observation of cells on microscopy slides. However, the combination of molecular fingerprinting methods with the whole cell hybridization approach to monitor the potential enrichment and isolation of “unculturable”, VBNC or “hitherto—as yet—uncultured” bacteria is a powerful tool which has so far been only sparsely explored. Thus, albeit with a definite right of their own, molecular analyses on the basis of extractive approaches clearly gain enormous scientific strength and meaning when they are tied together with methods based on cultivation approaches. It is foreseeable that a polyphasic strategy, in which the extractive, the whole cell hybridization and the cultivation-based approaches are combined, ultimately offers the best perspective for future studies on the fate and activity of microorganisms in their natural habitats.
Acknowledgments This work was supported by grants from the EU-BIOTECH Programme. We thank L.S. van Overbeek for critically reading the manuscript. J.D. van Elsas and C. C. Tebbe are members of the MAREP Concerted Action sponsored by the European Commission Biotechnology Programme, DGXII.
References 1. Akkermans ADL, van Elsas JD, de Bruijn FJ. Molecular Microbial Ecology Manual. Kluwer Academic Publishers, Dordrecht, 1995. 2. Trevors JT, van Elsas JD. Nucleic acids in the Environment; Methods and Applications. Springer Verlag, Heidelberg, 1995.
46
Tracking Genetically-Engineered Microorganisms
3. Van Elsas JD, Duarte GF, Rosado AS et al. Microbiological and molecular biological methods for monitoring microbial inoculants and their effects in the soil environment. J Microbiol Meth 1998; 32:133-154. 4. Torsvik V. Isolation of bacterial DNA from soil. Soil Biol Biochem 1980; 12:15-21. 5. Holben WE, Jansson JK, Chelm BK et al. DNA probe method for the detection of specific microorganisms in the soil bacterial community. Appl Environ Microbiol 1988; 54:703-711. 6. Ogram A, Sayler GS, Barkay TJ. DNA extraction and purification from sediments. J Microbiol Meths 1987; 7:57-66. 7. Steffan RJ, Goksoyr J, Bej AK et al. Recovery of DNA from soils and sediments. Appl Environ Microbiol 1988; 54:2908-2915. 8. Dijkmans R, Jagers A, Kreps S et al. Rapid method for purification of soil DNA for hybridization and PCR analysis. Microb Rel 1993; 2:29-34. 9. Josephson KL, Gerba CP, Pepper IL. Polymerase chain reaction detection of nonviable bacterial pathogens. Appl Environ Microbiol 1993; 59:3513-3515. 10. Malik M, Kain J, Pettigrew C et al. Purification and molecular analysis of microbial DNA from compost. J Microbiol Meth 1994; 20:183-196. 11. Lovell CR, Piceno Y. Purification of DNA from estuarine sediments. J Microbiol Meth 1994; 20:161-174. 12. Purdy KJ, Embley TM, Takii S et al. Rapid extraction of DNA and rRNA from sediments by a novel hydroxyapatite spin-column method. Appl Environ Microbiol 1996; 62: 3905-3907. 13. Cullen DW, Hirsch PH. Simple and rapid method for direct extraction of microbial DNA from soil for PCR. Soil Biol Biochem 1998; 30:983-993. 14. Tebbe CC, Vahjen W. Interference of humic acids and DNA extracted directly from soil in detection and transformation of recombinant DNA from bacteria and a yeast. Appl Environ Microbiol 1993; 59:2657-2665. 15. Smalla K, Cresswell N, Mendonca-Hagler LC et al. Rapid DNA extraction protocol from soil for polymerase chain reaction-mediated amplification. J Appl Bacteriol 1993; 74:78-85. 16. Tsai, Y-L, Olson BH. Rapid method for separation of bacterial DNA from humic substances in sediments for polymerase chain reaction. Appl Environ Microbiol 1992; 58:2292-2295. 17. Tsai Y-L, Olson BH. Detection of low numbers of bacterial cells in soils and sediments by polymerase chain reaction. Appl Environ Microbiol 1992; 58:754-757. 18. Porteous LA, Armstrong JL. A simple method to extract DNA directly from soil for use with polymerase chain reaction amplification. Curr Microbiol 1993; 27:115-118. 19. Porteous LA, Armstrong JL, Seidler RJ et al. An effective method to extract DNA from environmental samples for polymerase chain reaction amplification and DNA fingerprint analysis. Curr Microbiol 1994; 29:301-307. 20. Kuske CR, Banton KL, Adorada DL et al. Small-scale DNA sample preparation method for field PCR detection of microbial cells and spores in soil. Appl Environ Microbiol 1998; 64:2463-2472. 21. Torsvik V, Goksoyr J, Daae FL. High diversity in DNA of soil bacteria. Appl Environ Microbiol 1990; 56:782-787. 22. Paul JH, Pichard SL. Extraction of DNA and RNA from aquatic environments. In: Trevors JT, van Elsas JD, eds. Nucleic acids in the environment. Methods and applications. Berlin: Springer Verlag 1995: 153-177. 23. Bej AK, Mahbubani MH, Dicesare JL et al. Polymerase chain reaction-gene probe detection of microorganisms by using filter-concentrated samples. Appl 9-3534. 24. Fuhrman JA, Comeau DE, Hagström A et al. Extraction from natural planctonic microorganisms of DNA suitable for molecular biological studies. Appl Environ Microbiol 1988; 54:1426-1429. 25. Somerville CC, Knight IT, Straub, WL et al. Simple rapid method for direct extraction of nucleic acids from aquatic environments. Appl Environ Microbiol 1989; 55:548-554.
Extraction and Analysis of Nucleic Acids
47
26. Pickup RW, Rhodes G, Saunders JR. Extraction of microbial DNA from aquatic sources: freshwater. In: Akkermans ADL, van Elsas JD, de Bruijn FJ, eds. Molecular Microbial Ecology Manual. Dordrecht: Kluwer Academic Publishers, 1995:1.1.2:1-11. 27. Paul J. Extraction of microbial DNA from aquatic sources: Marine environments. In: Akkermans ADL, van Elsas JD, de Bruijn FJ, eds. Molecular Microbial Ecology Manual. Dordrecht: Kluwer Academic Publishers, 1996:1.1.1:1-13. 28. Dixon B. Biofilms: Diversity in action. ASM News 1998; 64:484-485. 29. Hopkins DW, O’Donnell AG. Methods for extracting bacterial cells from soil. In: Wellington EMH, van Elsas JD, eds. Genetic Interactions Among Microorganisms in the Natural Environment.1992: 104-112. London: Pergamon Press. 30. Torsvik V. Cell extraction method. In: Akkermans ADL, van Elsas JD, de Bruijn FJ eds. Molecular Microbial Ecology Manual. Dordrecht: Kluwer Academic Publishers, 1995: 1.3.1:1-15. 31. Priemé A, Sitaula JIB, Klemedtsson AK et al. Extraction of methane-oxidizing bacteria from soil particles. FEMS Microbiol Ecol 1996; 21:59-68. 32. Leung K, Trevors JT, van Elsas JD. Extraction and amplification of DNA from the rhizosphere and rhizoplane of plants. In: Nucleic Acids in the Environment; Methods and Applications. In: Trevors JT, van Elsas JD, eds. Heidelberg: Springer Verlag,. 1995: 69-87. 33. Strickland TC, Sollins P, Schimel DS et al. Aggregation and aggregate stability in forest and range soil. Soil Sci Soc Am J 1988; 52:829-833. 34. Donegan K, Matyac C, Seidler R et al. Evaluation of methods for sampling, recovery, and enumeration of bacteria applied to the phylloplane. Appl Environ Microbiol 1991; 57:51-56. 35. Ramsay AJ. Extraction of bacteria from soil: Efficiency of shaking or ultrasonication as indicated by direct counts and autoradiography. Soil Biol Biochem 1984;16:475-481. 36. Lindahl V, Aa K, Olsen RA. Effects on microbial activity by extraction of indigenous cells from soil slurries. FEMS Microbiol Ecol 1996; 21:221-230. 37. Faegri A, Torsvik VL, Goksoyr J. Bacterial and fungal activities in soil: Separation of bacteria and fungi by a rapid fractionated centrifugation technique. Soil Biol Biochem 1977; 9:105-112. 38. Riis V, Lorbeer H, Babel W. Extraction of microorganisms from soil: Evaluation of the efficiency by counting methods and activity measurements. Soil Biol Biochem 1998; 30:1573-1581. 39. MacDonald RM. Sampling soil microfloras: Dispersion of soil by ion exchange and extraction of specific microorganisms from suspensions by elutriation. Soil Biol Biochem 1986; 18:399-406. 40. Herron PR, Wellington EMH. New method for extraction of streptomycete spores from soil and application to the study of lysogeny in sterile amended and nonsterile soil. Appl Environ Microbiol 1990; 56:1406-1412. 41. Jacobsen CS, Rasmussen OF. Development and application of a new method to extract bacterial DNA from soil based on separation of bacteria from soil with cation-exchange resin. Appl Environ Microbiol 1992; 58:2458-2462. 42. Lindahl V, Bakken LR. Evaluation of methods for extraction of bacteria from soil. FEMS Microbiol Ecol 1995; 16:135-142. 43. Bakken LR, Lindahl V. Recovery of bacterial cells from soil. In: Trevors JT, van Elsas JD eds. Nucleic Acids in the Environment. Berlin Heidelberg: Springer-Verlag 1995: 13-27. 44. Duarte GF, Rosado AS, Keijzer-Wolters AC et al. Extraction of ribosomal RNA and genomic DNA from soil for studying the diversity of the indigenous microbial community. J Microbiol Methods 1998; 32:21-29. 45. Selenska-Pobell S. Direct and simultaneous extraction of DNA and RNA from soil. In: Akkermans ADL, van Elsas JD, de Brujn FJ eds. Molecular Microbial Ecology Manual 1995; 1.5.1:1-17 46. Moore E, Arnscheidt A, Kruger A et al. Simplified protocols for the preparation of genomic DNA from bacterial cultures. In: Akkermans ADL, van Elsas JD, de Brujn FJ eds. Molecular Microbial Ecology Manual 1999 (in press).
48
Tracking Genetically-Engineered Microorganisms
47. Moré MI, Herrick JB, Silva MC et al. Quantitative cell lysis of indigenous microorganisms and rapid extraction of microbial DNA from sediment. Appl Environ Microbiol 1994; 60:1572-1580. 48. Volossiouk T, Robb EJ, Nazar RN. Direct DNA extraction for PCR-mediated assays of soil organisms. Appl Environ Microbiol 1995; 61:3972-3976. 49. Nazar RN, Robb EJ, Volossiouk T. In: Akkermans ADL, van Elsas JD, de Bruijn FJ eds. Molecular Microbial Ecology Manual. Kluwer Acad Publ Dordrecht 1996; 1.3.6: 1-8. 50. Briglia M, Eggen RIL, de Vos WM et al. Rapid and sensitive method for the detection of Mycobacterium chlorophenolicum PCP-1 in soil based on 16S rRNA gene-targeted PCR. Appl Environ Microbiol 1996; 62:1478-1480. 51. Rosado AS, Seldin L, Wolters AC et al. Quantitative 16S rDNA-targeted polymerase chain reaction and oligonucleotide hybridization for the detection of Paenibacillus azotofixans in soil and the wheat rhizosphere. FEMS Microbiol Ecol 1996; 19:153-164. 52. Van Elsas JD, Duarte GF, Keijzer-Wolters A et al. Analysis of the dynamics of fungal communities in soil via fungal-specific PCR of soil DNA followed by denaturing gradient gel electrophoresis. Molec Ecol 1999 (in press). 53. Picard C, Ponsonnet C, Paget E et al. Detection and enumeration of bacteria in soil by direct DNA extraction and polymerase chain reaction. Appl Environ Microbiol 1992; 58:2717-2722. 54. Sambrook J, Fritsch EF, Maniatis T. Molecular Cloning. A Laboratory Manual. Second Edition. 1989. New York: Cold Spring Harbor. 55. Al-Soud WA, Radström P. Capacity of nine thermostable DNA polymerases to mediate DNA amplification in the presence of PCR-inhibiting samples. Appl Environ Microbiol 1998; 64:3748-3753. 56. Van Elsas JD, van Overbeek LS, Fouchier R. A specific marker, pat, for studying the fate of introduced bacteria and their DNA in soil using a combination of detection techniques. Plant Soil 1991; 138:49-60. 57. Myrold DD, Martin KJ, Ritchie NJ. In: Akkermans ADL, van Elsas JD, de Bruijn FJ eds. Molecular Microbial Ecology Manual 1995; 1.3.5:1-9. 58. Young CC, Burghoff RL, Keim LG et al. Polyvinyl pyrrolidene. Agarose gel eletrophoresis purification of poylmerase chain reaction-amplified DNA from soil. Appl Environ Microbiol 1998; 59:1972-1974. 59. Tsai YL, Park MJ, Olson BH. Rapid extraction of mRNA from seeded soils. Appl Environ Microbiol 1991; 57:765-768. 60. Moran MA, Torsvik VL, Torsvik T et al. Direct extraction and purification of rRNA for ecological studies. Appl Environ Microbiol 1993; 59:915-918. 61. Van Elsas, JD, Mantynen V, Wolters AC. Soil DNA extraction and assessment of the fate of Mycobacterium chlorophenolicum strain PCP-1 in different soils via 16S ribosomal RNA gene sequence based most-probable-number PCR and immunofluorescence. Biol Fertil Soils 1997; 24:188-195. 62. Zhou J, Bruns MA, Tiedje JM. DNA recovery from soils of diverse composition. Appl Environ Microbiol 1996; 62:316-322. 63. Nusslein K, Tiedje JM. Characterization of the dominant and rare members of a young Hawaiian soil bacterial community with small-subunit ribosomal DNA amplified from DNA fractionated on the basis of its guanine and cytosine composition. Appl Environ Microbiol 1998; 64:1283-1289. 64. Sayler GS, Layton AC. Environmental application of nucleic acid hybridization. Ann Rev Microbiol 1990; 44:625-648. 65. Jansson JK, Holben WE, Tiedje JM. Detection in soil of a deletion in an engineered DNA sequence by using DNA probes. Appl Environ Microbiol 1989; 55:3022-3025. 66. Voordouw G. Reverse sample genome probing of microbial community dynamics. ASM News 1998; 64:627-633. 67. Muyzer G, de Waal EC, Uitterlinden AG. Profiling of complex microbial populations by denaturing gradient gel electrophoresis analysis of polymerase chain reaction-amplified genes coding for 16S rRNA. Appl Environ Microbiol 1993; 59:695-700
Extraction and Analysis of Nucleic Acids
49
68. Heuer H, Smalla K. Application of denaturing gradient gel electrophoresis and temperature gradient gel electrophoresis for studying soil microbial communities. In: van Elsas JD, Trevors JT, Wellington EMH eds. Modern Soil Microbiology 1997; 353-373. New York, NY : Marcel Dekker. 69. Liu WT, Marsh TL, Cheng H, Forney LJ. Characterization of microbial diversity by determining terminal restriction fragment length polymorphisms of genes encoding 16S rRNA. Appl Environ Microbiol 1997; 63:4516-4522. 70. Schwieger F, Tebbe CC. A new approach to utilize PCR-single-strand conformation polymorphism for 16S rRNA-based microbial community analysis. Appl Environ Microbiol 1998; 64:4870-4876. 71. Suzuki M, Rappe MS, Giovannoni SJ. Kinetic bias in estimates of coastal picoplankton community structure obtained by measurements of small-subunit rRNA gene PCR amplicon length heterogeneity. Appl Environ Microbiol 1998; 64:4522-4529. 72. Heuer H, Hartung K, Wieland G et al. Polynucleotide probes that target a hypervariable region of 16S rRNA genes to identify bacterial isolates corresponding to bands of community fingerprints. Appl Environ Microbiol 1999; 65:1045-1049. 73. Tougianidou D, Botzenhart K. Detection of poliovirus in water by direct isolation of the RNA and hybridization with gene probes. Water Sci Technol 1991; 27:219-222 74. Bej AK. PCR amplification of DNA recovered from the aquatic environment. In: Trevors JT, van Elsas JD, eds. Nucleic acids in the environment; Methods and Applications. Heidelberg: Springer Verlag, 1995; 179-218. 75. Tsai YL, Tran B, Palmer CJ. Analysis of viral RNA persistence in seawater by reverse transcriptase-PCR. Appl Environ Microbiol 1995; 61:363-366. 76. Limsawat S, Ohgaki S. Fate of liberated viral RNA in wastewater determined by PCR. Appl Environ Microbiol 1997; 63:2932-2933. 77. Felske A., Akkermans ADL, de Vos WM. Quantification of 16S rRNAs in complex bacterial communities by multiple competitive reverse transcription—PCR in temperature gradient gel electrophoresis fingerprints. Appl Environ Microbiol 1998; 64:4581-4587. 78. Pichard SL, Paul JH. Extraction of microbial RNA from aquatic sources: Marine environments. In: Akkermans ADL, van Elsas JD, de Brujn FJ, eds. Molecular Microbial Ecology Manual 1996; 1.2.1:1-13. 79. Borneman J, Triplett EW. Rapid and direct method for extraction of RNA from soil. Soil Biol Biochem 1997; 29:1621-1624. 80. Selenska S, Klingmüller W. Direct recovery and molecular analysis of DNA and RNA from soil. Microb Releases 1992; 1:41-46. 81. Pichard SL, Paul JH. Detection of gene expression in genetically engineered microorganisms and natural phytoplancton populations in the marine environment by mRNA analysis. Appl Environ Microbiol 1991; 57:1721-1727. 82. Ogunseitan OA, Delgado IL, Tsai YL et al. Effect of 2-hydroxybenzoate on the maintenance of napthhalene degrading pseudomonads in seeded and unseeded soil. Appl Environ Microbiol 1991; 57:2873-2879. 83. Hahn D, Kester R, Starrenburg MJC et al. Extraction of ribosomal RNA from soil for the detection of Frankia with oligonucleotide probes. Arch Microbiol 1990; 154:329-335. 84. Felske A, Wolterink A, Van Lis R et al. Phylogeny of the main bacterial 16S rRNA sequences in Drentse A grassland soils (The Netherlands). Appl Environ Microbiol 1998; 64:871-879. 85. Felske A, Backhaus H, Akkermans ADL. Direct ribosome isolation from soil. In: Akkermans ADL, van Elsas JD, de Brujn FJ eds. Molecular Microbial Ecology Manual 1998; 1.2.4:1-10. 86. Chandler DP, Wagnon CA, Bolton Jr H. Reverse transcriptase (RT) inhibition of PCR at low concentrations of template and its implications for quantitative RT-PCR. Appl Environ Microbiol 1998; 64:669-677. 87. Felske A, Engelen B, Nübel U et al. Direct ribosome isolation from soil to extract bacterial rRNA for community analysis. Appl Environ Microbiol 1996; 62:4162-4167. 88. Moran MA, Torsvik VL, Torsvik T et al. Direct extraction and purification of rRNA for ecological studies. Appl Environ Microbiol 1993; 59:915-918.
50
Tracking Genetically-Engineered Microorganisms
89. Ogram A, Sun W, Brockman FJ et al. Isolation and characterization of RNA from low biomass deep-surface sediments. Appl Environ Microbiol 1995; 61:763-768. 90. Cattaneo R. Different types of messenger RNA editing. Annu Rev Genet 1991; 25:71-88. 91. Tebbe CC, Wenderoth DF, Vahjen W et al. Direct detection of recombinant gene expression by two genetically engineered yeasts in soil on the transcriptional and translational levels. Appl Environ Microbiol 1995; 61:4296-4303. 92. Lamar RT, Schoenike B, Vanden Wymelenberg A et al. Quantitation of fungal mRNAs in complex substrates by reverse transcription PCR and its application to Phanerchaete chrysosporium-colonized soil. Appl Environ Microbiol 1995; 61:2122-2126. 93. Bogan BW, Schoenike B, Lamar RT et al. Expression of lip genes during growth in soil and oxidation of anthracene by Phanerochaete chrysosporium. Appl Environ Microbiol 1996; 62:3679-3703. 94. Bogan BW, Schoenike B, Lamar RT et al. Manganese peroxidase mRNA and enzyme activity levels during bioremediation of polycyclic aromatic hydrocarbon-contaminated soil with Phanerochaete chrysosporium. Appl Environ Microbiol 1996; 62:2381-2386. 95. Neidhardt FC, Ingraham JL, Schaechter M. Physiology of the bacterial cell: A molecular approach. Sunderland, Mass: Sinauer Associates Inc., 1990. 96. Fleming JT, Sanseverino J, Sayler GS. Quantitative relationship between naphthalene catabolic gene frequency and expression in predicting PAH degradation in soils at town gas manufacturing sites. Environ Sci Technol 1993; 27:1068-1074. 97. Hönerlage W, Hahn D, Zeyer J. Detection of mRNA of nprM in Bacillus megaterium ATCC 14581 grown in soil by whole-cell hybridization. Arch Microbiol 1995; 163:1814-1821. 98. Heitzer A, Webb OF, Thonnard JE et al. Specific and quantitative assessment of naphthalene and salicylate bioavailability by using a bioluminescent catabolic reporter bacterium. Appl Environ Microbiol 1992; 58:1839-1846. 99. Brazil GM, Kenefick L, Callanan M et al. Construction of a rhizosphere pseudomonad with potential to degrade polychlorinated biphenyls and detection of bph gene expression in the rhizosphere. Appl Environ Microbiol 1995; 61:1946-1952. 100. Paul JP, Pichard SL. Extraction of DNA and RNA from aquatic environments. In: Trevors JT, van Elsas JD eds. Nucleic Acids in the Environment; Methods and Applications. Heidelberg: Springer Verlag 1995: 153-177. 101. Jeffrey WH, Nazaret S, Von Haven R. Improved method for recovery of mRNA from aquatic samples and its application to detection of mer expression. Appl Environ Microbiol 1994; 60:1814-1821. 102. Nazaret S, Jeffrey WH, Saouter E et al. merA gene expression in aquatic environments measured by mRNA production and Hg(II) volatilization. Appl Environ Microbiol 1994; 60:4059-4065. 103. Fleming JT, Yao WH, Sayler GS. Optimization of differential display of prokaryotic mRNA: application to pure culture and soil microcosms. Appl Environ Microbiol 1998; 64:3698-3706. 104. Amann RI, Ludwig W, Schleifer KH. Phylogenetic identification and in situ detection of individual microbial cells without cultivation. Microbiol Rev 1995; 59:143-169. 105. Von Wintzigerode F., Göbel UB, Stackebrandt E. Determination of microbial diversity in environmental samples: pitfalls of PCR-based rRNA analysis. FEMS Microb Rev 1997; 21:213-229. 106. Head IM, Saunders JR, Pickup RW. Microbial evolution, diversity, and ecology: a decade of ribosomal RNA analysis of uncultured microorganisms. Microb Ecol 1998; 35:1-21. 107. Wagner R. The regulation of ribosomal RNA synthesis and bacterial cell growth. Arch Microbiol 1994; 161:100-106. 108. Giovannoni SJ, Britschgi TB, Moyer CL et al. Genetic diversity in Sargasso sea bacterioplankton. Nature 1990; 345:60-63. 109. Binder BJ, Liu YC. Growth rate regulation of rRNA content of a marine Synechococcus (Cyanobacteria) strain. Appl Environ Microbiol 1998; 64:3364-3351.
Extraction and Analysis of Nucleic Acids
51
110. Fuhrman JA, Lee SH, Masuchi Y et al. Characterization of marine prokaryotic communities via DNA and RNA. Microb Ecol 1994; 28:133-145. 111. Devereux R, Willis SG. Amplification of ribosomal RNA sequences. In: Akkermans ADL, van Elsas JD, de Brujn FJ eds. Molecular Microbial Ecology Manual. Dordrecht, NL: Kluwer Acad Publ 1995; 3.3.1:1-11. 112. Ludwig W, Dorn S, Springer N et al. PCR-based preparation of 23S rRNA-targeted groupspecific polynucleotide probes. Appl Environ Microbiol 1994; 60: 3236-3244. 113. Normand P, Ponsonnet C, Nesme X et al. ITS analysis of prokaryotes. In: Akkermans ADL, van Elsas JD, de Brujn FJ eds. Molecular Microbial Ecology Manual Dordrecht, NL: Kluwer Acad Publ 1996; 3.4.5:1-12. 114. White TJ, Bruns T, Lee S et al. Amplification and direct sequencing of fungal ribosomal RNA genes for phylogenetics. In: Innis MA, Gelfand DH, Sninsky JJ, White TJ eds. PCR protocols. A guide to methods and applications. San Diego: Academic Press 1990: 315-322. 115. Zoetendal EG, Akkermans ADL, De Vos WM. Temperature gradient gel electrophoresis analysis of 16S rRNA from human fecal samples reveals stable and host-specific communities of active bacteria. Appl Environ Microbiol 1998; 64:3854-3859. 116. Pichard SL, Paul JH. Gene expression per gene dose, a specific measure of gene expression in aquatic microorganisms. Appl Environ Microbiol 1993; 59:451-457. 117. Jansson J, Leser T. Quantitative PCR of environmental samples. In: van Elsas JD, Trevors JT, Wellington EMH eds. Molecular Microbial Ecology Manual Kluwer Acad. Publ. Dordrecht, NL 1996; 2.7.4:1-19. 118. Romanowski G, Lorenz MG, Wackernagel W. Use of polymerase chain reaction and electroporation of Escherichia coli to monitor the persistence of extracellular plasmid DNA introduced into natural soils. Appl Environ Microbiol 1993; 59:3438-3446. 119. Nesme X, Picard C, Simonet P. Specific DNA sequences for detection of soil bacteria. In: Trevors JT, van Elsas JD eds. Nucleic acids in the environment; Methods and Applications. Heidelberg: Springer Verlag 1995; 111-140. 120. Polz MF, Cavanaugh CM. Bias in template-to-product ratios in multitemplate PCR. Appl Environ Microbiol 1998; 64:3724-3730. 121. Moller A, Jansson JK. Quantification of genetically-tagged cyanobacteria in Baltic sea sediment by competitive PCR. Biotechniques 1997; 22:512-518. 122. Leser TD, Boye M, Hendriksen NB. Survival and activity of Pseudomonas sp. strain B13 (FR1) in a marine microcosm determined by quantitative PCR and an rRNA-targeting probe and its effect on the indigenous bacterioplankton. Appl Environ Microbiol 1995; 61:1201-1207. 123. Van Elsas JD, Rosado AS, Wolters AC et al. Quantitative detection of Sphingomonas chlorophenolica in soil via competitive polymerase chain reaction. J Appl Microbiol 1998; 85:463-471. 124. Selvaratnam S, Schoedel B, McFarland BL et al. Application of reverse transcriptase PCR for monitoring expression of the catabolic dmpN gene in a phenol-degrading sequencing batch reactor. Appl Environ Microbiol 1995; 61:3981-3985. 125. Liesack W, Janssen PH, Rainey FA et al. Microbial diversity in soil: the need for a combined approach using molecular and cultivation techniques. In: van Elsas JD, Trevors JT, Wellington EMH, eds. Modern Soil New York: Microbiology Marcel Dekker, Inc. 1997; 375-439. 126. Hahn D, Amann RI, Ludwig W et al. Detection of micro-organisms in soil after in situ hybridization with rRNA-targeted, fluorescently labeled oligonucleotides. J Gen Microbiol 1992; 138: 879-887. 127. Hodson RE, Dustman WA, Garg RP et al. In situ PCR for visualization of microscale distribution of specific genes and gene products in prokaryotic communities. Appl Environ Microbiol 1995; 61:4074-4082. 128. Chen F, Gonzalez JM, Dustman WA et al. In situ reverse transcription, an approach to characterize genetic diversity and activities of prokaryotes. Appl Environ Microbiol 1997; 63: 4907-4913. 129. Tani K, Kurokawa K, Nasu M. Development of a direct in situ PCR method for detection of specific bacteria in natural environments. Appl. Environ Microbiol 1998; 64:1536-1540.
CHAPTER 4
Detection of Bacteria by Their Intrinsic Markers Éva Tas and Kristina Lindström
4.1. Introduction
T
he detection and identification of specific bacterial species and strains has long been of interest for different applications in agriculture, the food industry, the bioleaching industry and the biological degradation of toxic wastes (bioremediation). In addition, basic and applied sciences, such as microbial ecology, are investing more research into exploring the components of microbial populations living in various ecological niches. Classical microbial identification methods are primarily based on morphology, growth characteristics and metabolic properties of the organism under study. For pathogens or symbiotic organisms, host specificity is also an important feature. In addition, bacteriophage typing, antibiotic resistance, lipopolysaccharide and protein profiles, serological properties, and plasmid profiles of bacteria can be characterized. More advanced immunological techniques include detection of antigens by enzyme-linked immunosorbent assay (ELISA) or by fluorescent antibody labeling. The problem with most of these techniques is that they require microbiological cultivation. Thus, for example, detection of released organisms may not be possible when their numbers are low relative to those of the indigenous population.1 In addition, disadvantages of the immunological methods lay in possible cross-reactions and nonspecific binding. The use of monoclonal antibodies can be a solution,2,3 but the antigens to be detected can be variable depending on growth conditions. Along with the traditional identification methods described above, molecular methods, including detection of specific nucleic acid sequences or profiles are now available. Nucleic acid based detection techniques overcome some of the problems inherent in traditional identification methods (see above) and they are usually more rapid and sensitive than traditional approaches. Detection of specific DNA or RNA sequences in environmental samples enables reliable detection of virtually any group of microorganisms, including those in nonculturable states.4 In particular, DNA:DNA hybridization5 and the polymerase chain reaction (PCR)6,7 are indispensable tools for detection of microorganisms in environmental samples. The reader is also referred to Chapter 3 for details on extraction and analysis of nucleic acids from environmental samples. The targets for molecular identification methods can be intrinsic markers or introduced markers. An intrinsic marker can be defined as a natural (i.e., nonintroduced) DNA sequence or phenotype that serves as a signature for a particular organism or group of organisms. Detection of intrinsic markers is an important tool for identification of specific Tracking Genetically-Engineered Microorganisms, edited by Janet K. Jansson, Jan Dirk van Elsas, Mark J. Bailey. ©2000 EUREKAH.COM.
54
Tracking Genetically-Engineered Microorganisms
microorganisms in the environment and complements the use of marker genes for genetic tagging of microorganisms (see Chapters 5-7 describing introduced marker genes). In this chapter we will introduce some examples of the use of intrinsic DNA markers for monitoring of specific microorganisms. We will also describe methods for designing specific nucleic acid probes and PCR primers, which are prerequisites for the application of these detection techniques.
4.2. Brief Description of PCR-Based Fingerprinting Methods PCR based fingerprinting methods are useful for bacterial identification and, as such, are gaining an important role in ecological studies. Some of these methods, such as arbitrarily primed PCR8 and random primed amplified polymorphic DNA (RAPD) analysis,9 are based on amplification of multiple DNA fragments from genomic DNA with random or arbitrary primers, which will result in a characteristic pattern of PCR products for each different organism. Amplified fragment length polymorphism (AFLP) is a variation of these techniques in which genomic DNA is digested with a restriction endonuclease, ligated to adapters, and PCR amplified using primers complementary to the adapters.10 Specific genomic fingerprints can also be achieved by amplification of conserved repetitive bacterial sequences such as Repetitive Extragenic Palindromes (REP), Enterobacterial Repetitive Intergenic Consensus (ERIC) sequences and BOX elements found mainly in gram positive bacteria. 11,12 An example of REP PCR fingerprinting is described in section 4.4.4 below. Other techniques can be used to detect different microorganisms in mixed populations. For example, microbial community diversity can be analyzed by PCR amplification of DNA encoding 16S rRNA genes and separating the products by temperature or denaturing gradient gel electrophoresis (TGGE and DGGE). The resulting fingerprints are indicative of the major species present in a given ecosystem and are sensitive indicators of changes in the structures of microbial communities with different treatments.13
4.3. Development of Specific Hybridization Probes and PCR Primers The first crucial step for both DNA/RNA hybridization and PCR techniques is to find appropriate probe or primer sequences. Fortunately, the development of recombinant DNA techniques and the large amount of sequences accessible in nucleic acid databanks now allow probes and primers to be designed with desired specificity, e.g., for strains, species, genera or other groups. Here we outline a few different approaches for probe design.
4.3.1. Detection of Specific Genes Numerous bacterial genes or gene fragments have been cloned and sequenced, and their occurrence in different organisms is often known. Therefore, these DNA sequences can serve as potential targets for DNA hybridization or PCR. Bacteria that are genetically characterized are often identified using these methods in clinical diagnostics, the food industry and for environmental applications, such as bioremediation.14-21 For example, an intrinsic marker was used for detection of a biodegradative Pseudomonas Burkholderia cepacia strain in soil.22 The intrinsic sequence was a repeated 1.3 kb sequence present in 15-20 copies per cell. This sequence could be detected in sediment samples by dot blot DNA hybridization and PCR, even when the bacterium was no longer detectable by plating methods. In a similar approach, Raaijmakers et al 23 used a siderophore receptor gene as a specific wild type marker for a Pseudomonas putida strain. Engineered marker genes may also be detected by hybridization or PCR (see Chapter 3).19,22,24-29 These techniques are of particular importance for the detection of nonexpressed genetic markers. For example, if a marker gene is repressed or otherwise inactive under certain conditions, nucleic acid probes can still help to detect the gene. Pillai and Pepper30 found that
Detection of Bacteria by Their Intrinsic Markers
55
an antibiotic resistance marker carried by Tn5 was not expressed in some cells under high temperature stress. Another example is when the marker is not a fully functional gene but a recombinant fragment detectable by DNA techniques. Van Elsas et al28 used a small eukaryotic DNA fragment, pat from Solanum tuberosum, as a marker to study the fate of Pseudomonas fluorescens introduced into soil. This DNA sequence was not present in indigenous soil bacteria, so problems with background were eliminated.31 Although not expressed as a phenotypic marker, the pat fragment was readily detected by DNA hybridization and by PCR.
4.3.2. Detection of Ribosomal Genes Probes derived from 16S or 23S rRNA genes, or the intergenic transcribed spacer sequence (ITS) separating them, are often used for detection and identification of bacteria. Ribosomal RNA genes are appropriate target sequences against which DNA probes or primers can be directed, and there are several advantages to this approach. Firstly, ribosomal genes are universal and relatively well conserved, but they contain highly conserved and less conserved regions (including ITS), facilitating the design of probes with various specificities.32 Ribosomal RNA is a naturally amplified target (up to 105 copy per cell) that allows in situ detection of single cells by hybridization.33 In addition, ribosomal sequences are well documented in nucleic acid databanks which significantly enhances the potential of probe design. Finally, the probes based on ribosomal sequences are usually oligonucleotides that are easy to synthesize and label. Ribosomal RNA-targeted probes provide important tools for studying the microbial community structure of natural and man-made environments,34-37 but their specificity is limited. Generally, 16S rRNA-derived probes are reliable at the level of genus and above,38 whereas 23S rRNA- and ITS-derived probes distinguish closer relatives such as species and even strains.39 However, phenotypically divergent bacteria can have identical or nearly identical rRNA sequences. In contrast, significant variation in rRNA sequences has been described within single species or between different copies of the rrn operons of a strain.40 These factors should be considered when hybridization probes or PCR primers based on ribosomal sequences are to be used for monitoring.
4.3.3. Use of Randomly Cloned Fragments as Specific Probes When designing hybridization probes, it is not essential to know the function of the selected DNA fragment(s). Randomly cloned DNA fragments, such as entire or enriched genomic libraries, or sub-fragments from partially described genomic regions can be screened for unique sequences.41 Alternatively, specific sequences can be isolated by differential comparison of two or more genomes. Subtraction hybridization, which will be discussed later in more detail, is one method based on this idea. Another potential approach could exploit arbitrarily primed PCR, similarly to differential display which is a method for isolation of genes differentially expressed in different eukaryotic cells or tissues, as described by Liang and Pardee.42 These authors used a set of arbitrary primers for PCR amplification of cDNA generated by reverse transcription from mRNA. They could amplify and clone differentially expressed genes by comparison of the electrophoretic patterns of the amplified cDNA products from different cells. Taking a similar approach, a comparison of the patterns of fragments amplified from genomic DNA from different organisms, by any PCR fingerprinting method mentioned in section 4.2.1, can lead to isolation of DNA fragments unique for a particular bacterial group. The drawback of these methods is that the function, stability and genetic variability of the selected sequences are unknown. On the other hand, these methods can be very useful for rapid preparation of specific hybridization probes, without the requirement for knowledge of sequence information.
56
Tracking Genetically-Engineered Microorganisms
4.3.4. Specificity of Selected Probes and Primers Specificity of each probe and primer pair has to be experimentally evaluated, especially against closely related nontarget groups of bacteria or bacteria inhabiting the environment studied. Since the probes are based on the sequences of strains from culture collections, we cannot be sure that they recognize all possible organisms from an environmental sample that belong to a target group. For example, the developed probes or primers might not detect organisms of environmental importance, which have never been previously cultured. In contrast, unspecificity may be revealed during the environmental application of new probes. This is illustrated by the work of Cullen et al, who used PCR to monitor Rhizobium inoculants in the field.1 One of their markers specifically detected the inoculated strain, while DNA sequences of indigenous bacteria were not amplified. With another set of primers they detected homologous sequences that were present in the indigenous soil microbial population. Some of these nonspecific products comigrated in the gel with the targeted DNA bands, but they could be distinguished by DNA hybridization. Some of the problems with unspecificity could be avoided by increasing the stringency of the reaction conditions used in the assay.
4.3.5. Sensitivity of Detection Detection limits of bacterial strains in environmental samples using the polymerase chain reaction are mainly dependent on the success of nucleic acid extraction. When analyzing aquatic samples, the main problem is the need for filtration of large volumes of water to obtain sufficient cell concentrations. With soil samples, PCR-inhibitory contaminants coextracted with the DNA cause a major problem. Variation in cell lysis and DNA recovery efficiencies could effect not only the yield, but also the ratio of target DNA to nontarget DNA in the extracts used as templates in the PCR reactions. (See chapter 3 for details.) It is possible to increase the sensitivity to a certain extent by fractionating the DNA on CsCl gradients according to its G+C content. This way the target DNA can be enriched in one of the fractions relatively to total environmental DNA.1 Optimization of the PCR reaction conditions, including template concentration, magnesium concentration and number of PCR cycles are ultimate requirements for optimum sensitivity. In some applications special additives in the reaction mixture such as formamide, BSA or betaine can increase both the specificity and the yield of PCR products. As mentioned above, combined use of PCR and hybridization increases not only the specificity but also the sensitivity of detection. For example, in hybridization experiments with mRNA targeted gene specific probes, relatively high cell numbers (> 106 per g of soil or 106 per liter of water) are needed for reliable quantitative detection, although even single cells can be visualized. When PCR is involved in the procedure, 1-100 cells per gram of sediment or soil can be detected.1,22,29,37 However, the sensitivity of detection is always dependent on several factors such as nucleic acid extraction, copy number of the target, assay conditions, probe labeling techniques, and therefore should be considered case specific. Alternatively, nested PCR is another sensitive detection method. This technique uses a second set of primers, which bind to specific sequences internal to the first PCR product. Use of nested PCR confirms the identity of the PCR products and simultaneously increases the sensitivity of detection of the assay.
4.4. Case Study: Specific Detection of Rhizobium galegae Rhizobium bacteria are continuously being released because of their nitrogen fixing capacity that potentially promotes the growth of legumes with which rhizobia live in symbiosis. The Rhizobium-legume symbiosis has been widely investigated and the history of legume fields and inoculations are in many places well documented. Inoculation with new Rhizobium strains is often needed because of the lack of or inefficiency of the indigenous
Detection of Bacteria by Their Intrinsic Markers
57
rhizobial population. However, inoculation often fails because Rhizobium populations present in the soil may outcompete the newly introduced strain.43 That is why rhizobia are among the most important targets of genetic engineering, aiming to increase nitrogen fixation capacity or inoculation competitiveness.44 As a consequence of genetic engineering and environmental release, sensitive monitoring methods to detect rhizobia in the environment have become essential. Examples of field releases of genetically modified rhizobia are given in Chapters 8-11. Rhizobium galegae is a recently described and well-studied species45 that nodulates Galega officinalis and Galega orientalis (goat’s rue). The latter species is a perennial legume with potential agricultural importance. R. galegae has not yet been genetically engineered, but antibiotic resistant strains have been selected to facilitate laboratory studies. The species has unique taxonomy and host specificity45-47 and it is not indigenous in Finnish soils.48 These properties make it a suitable model organism for studying the fate of inoculant rhizobia in the field in Finland. R. galegae species- and strain-specific probes and PCR primers were developed in our laboratory. They allow specific detection of R. galegae from environmental samples as will be demonstrated in this chapter.
4.4.1. Development of a R. Galegae Species-Specific Probe by Testing Randomly Cloned Fragments As we described above, some approaches for isolation of specific probes comprise screening of partially described regions of a bacterial genome. Since R. galegae is peculiar in that it nodulates only a specific legume host,approaches were adapted to locate R. galegae speciesspecific hybridization probes from the genes determining host specificity. Limited information on the localization of these genes was known from previous hybridization experiments.49 Fragments of DNA, carrying the host specificity gene region of R. galegae, were analyzed for specificity in dot blot hybridization experiments.50 The blots contained total DNA from representatives of different rhizobial species and other soil bacteria. One of the probes hybridized strongly with DNAs from all tested R. galegae strains, but showed a weak reaction with two nontarget organisms (Rhizobium loti and Erwinia carotovora). Therefore, smaller sub-fragments of the probe were further analyzed (Fig. 4.1). One of the sub-fragments showed species-specificity: in Southern blot experiments with EcoRI digested total DNA of different bacteria, as it hybridized only with R. galegae DNA. The DNA fragment was sequenced and PCR primers were designed at the ends of it (Fig. 4.1). The specificity of the primers
Fig. 4.1. Fragments of genomic DNA from R. galegae HAMBI 1174, which carry host specificity genes, were analyzed for species specificity. The 2.4 kb EcoRI-fragment shown here was a good candidate but it weakly hybridized with DNA from nontarget organisms. Its three subfragments were also analyzed, and the 0.9 kb EcoRI–SalI fragment was species specific. Arrows show PCR primers.
58
Tracking Genetically-Engineered Microorganisms
was verified in PCR reactions with purified genomic DNA from an assortment of strains of R. galegae, other rhizobia and some other species.51 PCR amplification always produced an 850-bp specific fragment with R. galegae DNA. PCR-RFLP of this species-specific fragment revealed a difference between R. galegae strains according to their host plant G. orientalis and G. officinalis (Fig. 4.2).
4.4.2. Development of Strain-Specific Probes by Subtraction Hybridization Subtraction hybridization is an efficient method for isolation of DNA present in one genome (probe) but absent in another, otherwise very similar one (subtracter).52-54 Essentially, the procedure involves DNA:DNA or RNA:DNA hybridization carried out either in solution or at a surface. After hybridization, subtracter DNA and probe sequences homologous to it are separated from the mixture, which becomes enriched in nonhybridizing potentially unique target fragments. The hybridization and separation steps can be repeated several times using fresh pools of subtracter DNA in each cycle. The separated DNA pool enriched in specific sequences can be subsequently cloned for further screening or used directly as a probe. DNAs of different strains can be pooled for use as subtracter DNA. Thus, the desired probe specificity can be achieved by controlling the composition of the subtracter DNA.55 A schematic representation of the method is shown in Figure 4.3. The most important factors that affect the success of subtraction or number of cycles needed for effective enrichment are the level of homology the compared genomes share, the stringency of hybridization, and the extent of modifications of the hybridization partners such as restriction enzyme digestion, sonication, and biotin labeling. The subtraction method has several applications such as isolation of tissue-specific or developmental stage-specific genes,52,56 or cloning a gene missing in a deletion mutant.53,57 Subtraction hybridization was also successfully applied for isolation of specific bacterial probes. Welcher et al used the method for the first time and selected specific genomic sequences from Neisseria gonorrhoeae.52 Schmidhuber et al found Streptococcus oralis-specific probes with the same method.41 Bjourson and Cooper successfully isolated strain-specific probes for three different Rhizobium loti strains,54 and Bjourson et al 58 developed an improved method for isolation of strain-specific probes for Rhizobium leguminosarum bv. trifolii.58 In latter work the same researchers developed group-specific DNA probes for R. leguminosarum bv. phaseoli and R. tropici.55 In our laboratory, a R. galegae strain-specific probe was isolated59 by the subtraction protocol of Straus and Ausubel.53 Darrasse et al have applied the same subtraction strategy independently for isolation of probes specific for Erwinia carotovora subsp. atroseptica.60 Figure 4.3 illustrates the subtraction strategy used in our laboratory. The specificity of the selected probe was tested, similarly to the species-specific probe, in numerous dot blot and Southern blot experiments. The fragment was then sequenced, and PCR primers amplifying an internal fragment were designed. The probe and the primers recognized only the strain R. galegae HAMBI 1174, which had been used in the subtraction procedure.
4.4.3. Application of the R. galegae Specific Probes and Primers for Monitoring To study the applicability of detection with strain- and species-specific sequences, a greenhouse experiment was conducted.51 Soil devoid of R. galegae was inoculated with different levels of R. galegae HAMBI 1207, which forms an ineffective symbiosis with G. orientalis. Then seeds of G. orientalis, inoculated with the effective strain R. galegae HAMBI 1174, were sown into the soil. The competition between the two Rhizobium strains was assessed by measuring plant dry weights from the plots and inspecting nodules formed on the plant roots. Multiple PCR with the strain- and species-specific primers were used
Detection of Bacteria by Their Intrinsic Markers
59
Fig. 4.2. PCR-RFLP of the R. galegae-specific fragment from genomic DNA of different R. galegae strains with the restriction enzymes HinfI and MspI. The host plant is shown above the samples. Lanes: M, molecular weight marker; 1, reference strain, R. galegae HAMBI 1174; 2-15, other R. galegae strains.
60
Tracking Genetically-Engineered Microorganisms
Fig. 4.3. Isolation of a strain-specific probe by subtraction hybridization. HAMBI 1174 and HAMBI 1207 are genetically closely related strains of R. galegae.
directly from crushed nodules (Fig. 4.4). The results were in good agreement with those of dilution platings on selective media, in which the two strains could be counted. The specific primers were also used for the amplification of DNA extracted from soil and peat.61 After developing a suitable method for DNA extraction and purification from the peat samples (for methods see Chapter 3), the PCR assay proved to be very useful for quality control (i.e., confirmation of the inoculum strain) of commercial peat inoculants.
Detection of Bacteria by Their Intrinsic Markers
61
Fig. 4.4. PCR amplification of the R. galegae species-specific fragment (upper band) and the R. galegae HAMBI 1174 strain-specific fragment (lower band) from crushed nodules. Lanes: λ, molecular weight marker; 1, R. galegae HAMBI 1174 genomic DNA; 2, R. galegae HAMBI 1207 genomic DNA; 3-26, nodules from G. orientalis inoculated with R. galegae; -, negative control without template DNA. Reprinted with permission from Tas É, Leinonen P, Saano A et al. Appl Environ Microbiol 1996; 62:529-535.
4.4.4. Use of REP-PCR for Fingerprinting of Rhizobium galegae DNA primers corresponding to repetitive extragenic palindromic (REP) and enterobacterial repetitive intergenic consensus (ERIC) sequences can be used to produce specific fingerprints of different bacterial genomes.12 These primers were used to fingerprint the genomes of several R. galegae strains.62 For each strain tested, highly reproducible fingerprint patterns were obtained from pure bacterial genomic DNA. The patterns were specific for each strain and REP-PCR grouped the strains according to their host plant, G. orientalis and G. officinalis. The methods were useful for identification of bacteria from pure cultures as well as from Galega root nodules (Fig. 4.5). However, these methods are not suitable for the analysis of mixed bacterial populations such as those, for example, found in soil or peat samples, as the patterns obtained would become too complex.
4.5. Future Prospects Nucleic acid based methods for assessment of the environmental fate and effects of bacteria are under continuous development. In the future, growth and wider availability of nucleic acid sequence databases, further improvement and optimization of molecular techniques as well as application of microarray chips will facilitate monitoring studies. DNA databases are of great help in probe and primer design. Since data are accumulating very fast in nucleic acid sequence databanks, special databases of probes and PCR primers are of great value. There are probe databases accessible via the Internet. Alm et al have established an oligonucleotide probe database.63 Their probes and primers, mainly based on rRNA sequences, are widely used in microbial ecology and environmental microbiology. The authors also provide advice on probe and PCR primer design and characterization. A more complete database for ribosomal sequences and for data analysis tools is maintained at the Center for Microbial Ecology at Michigan State University.64 Another database is available at the Technical University of Munich (http://www.mikro.biologie.tu-muenchen.de). One of the most promising techniques is the direct detection and quantification of gene transcripts (mRNA) by reverse transcription-PCR, which allows assessment of micro-
62
Tracking Genetically-Engineered Microorganisms
Fig. 4.5. REP PCR fingerprint patterns of R. galegae DNA obtained by sonicating root nodules. Lanes: S, lambda BstEII; 1, genomic DNA from reference strain R. galegae HAMBI 540; 2, field nodule (R. galegae HAMBI 540); 3-8, nodules from G. orientalis inoculated with different R. galegae strains; 9, negative control without template DNA. Reprinted with permission from Nick G, Lindström K. System Appl Microbiol 1994; 17:265-273.
bial activities in the field (For a review see ref 65). The RT-PCR technique consists of synthesis of DNA from RNA by reverse transcription, and amplification of a specific DNA fragment by PCR. The method is very sensitive, and by using appropriate controls the detection can be made quantitative. The first environmental applications included detection of food-borne pathogens,66 and microorganisms used in bioremediation of contaminated soils.65 For the selection of a suitable target gene for RT-PCR several characteristics should be considered: the target gene should be abundantly expressed throughout the growth cycle of the organism tested, and its expression should not be regulated at the transcriptional level. Since bacterial mRNAs have a very short half-life, these methods discriminate living (i.e., metabolically active) cells from dead or dormant ones, although DNA from the latter ones can still be detected by DNA-targeted Southern hybridization or amplified by conventional PCR. (Detection of active contra dormant cells is discussed in more detail in Chapter 1.) Some technical difficulties arise from the need for rapid isolation of undegraded mRNA. However, in situ techniques are now under development for the amplification of gene transcripts inside microbial cells.18 In addition, the fingerprints achieved by the PCR-based applications mentioned in section 4.2.1 can be used for identification of microorganisms in pure cultures or relatively simple microbial communities. In highly diverse microbial systems such as soil, the banding patterns are too complex to be assigned to specific organisms but a comparison of microbial communities (diversity as well as quantitative aspects)67 is possible. Particularly the TGGE technique seems to be appropriate for monitoring effects of environmental disturbances such as pollution or release of new organisms.68 Hybridization of RNA and DNA on microarrayed ‘chips’ (on glass or silica surfaces) is another technique that will probably be broadly applied in the near future. Cheng et al prepared nucleic acids of E. coli and other bacteria from human blood and hybridized them with appropriate probes on microchips.69 Since the hybridization of RNA on microarrayed
Detection of Bacteria by Their Intrinsic Markers
63
chips allows monitoring of gene expression, this technique may prove to be useful in studying the dynamics of cell populations in environmental samples. Thus, microarrays have great potential in medical diagnostics, food monitoring, water testing, and other fields. New approaches based on specific molecular recognition mechanisms are also under development, such as nucleic acid probes detecting proteins and other molecules,70 or synthetic DNA mimics that behave like DNA oligonucleotides but bind to nucleic acids with higher specificity and affinity.71 Drolet et al have developed an ELISA-like assay using an oligonucleotide probe which binds to a protein target.70 A method called SELEX (systematic evolution of ligands by exponential enrichment)72 allowed rapid selection of oligonucleotides that preferentially bind to the target molecule from a population of random sequences. High affinity oligonucleotide ligands could be developed in this way for virtually any target molecule and used, for example, as therapeutic or diagnostic agents.73 Nucleic acid ligands would have several advantages over antibodies.70 For example, they can be easily synthesized and thus accurately replicated with the same binding properties, while antibodies may differ when generated in different laboratories and are also subject to animal-to-animal variation. Secondly, animals are not required for the synthesis of oligonucleotide ligands. Also, the ligands can be generated even for toxic or nonimmunogenic targets. Their small size can also be an advantage for some applications. In the future, further DNA ligands will be developed for diagnostic purposes and may be used for more general approaches. If successful, the method could challenge, for example, in situ hybridization and immune detection methods. An interesting new approach is based on the use of a synthetic molecule peptide nucleic acid (PNA). This molecule has recently been proposed to expand the applications of oligonucleotides.71 PNAs are DNA analogs with a polyamide backbone substituted with purine and pyrimidine base sidechains. The specificity of PNA in binding to complementary nucleic acids is higher than that of DNA strands, and the resulting PNA/DNA and PNA/RNA duplexes have high stability compared to DNA/DNA and DNA/RNA duplexes. Similarly to DNA, PNA can be labeled by biotin, fluorescein or reporter enzymes. Therefore, PNA is a good candidate for hybridization studies and may, one day, share the burgeoning field of DNA-based diagnostics with traditional nucleic acid probes. Along with the above described sophisticated genetic approaches, phenotypic description of microbial communities is equally important. Metabolic fingerprints of individual organisms or microbial communities can be determined by the BIOLOG‘ system, which colorimetrically detects the utilization of various carbon substrates. Phospholipid fatty acid (PLFA) profiles are also increasingly being used to characterize the structure of microbial communities.74,75
4.6. Conclusion To assess the survival and behavior of deliberately released strains in the environment, specific markers are required for monitoring the populations of both the released and the indigenous strains. Intrinsic markers are of great value in these studies and their detection complements the use of tagging genetically introduced marker genes. In addition, some applications, e.g. detection of pathogens or food-borne microorganisms, do not allow the use of genetically engineered markers. Therefore, detection techniques based on specific intrinsic markers are indispensable. This chapter focused on these techniques and discussed different methods for selection of suitable molecular probes and primers. In addition to exploring previously described genes or ribosomal sequences, an alternative for probe selection is screening randomly cloned fragments. This approach can provide specific probes also for organisms for which sequence data are limited. It was illustrated in this chapter by the isolation of strain- and species-specific probes from R. galegae. The problem with these random search methods is that the gene stability and genetic variability of the
Tracking Genetically-Engineered Microorganisms
64
fragments selected this way are unknown. However, in our experiments the data obtained proved that our markers are stable and can be used for ecological studies. Introduced marker genes may affect the fitness of the engineered organisms. In addition, gene transfer to nonmarked organisms can not be excluded. (Look for details in later chapters of the book.) Therefore, intrinsic markers are generally considered to be more stable than introduced markers, but further data is needed from comparative studies to address this hypothesis. Intrinsic markers can be detected with remarkable sensitivity, as illustrated by the fact that detection of a single cell is possible from some samples. The performance of in situ hybridization with fluorescent probes and the results of some PCR-based detection techniques are comparable in this sense with those of engineered marker genes, but extensive optimization of assay conditions is required. An early criticism on nucleic acid-based detection techniques was based on their incapability to distinguish active and dead cells, but this problem can be overcome by the use of RNA-targeted probes. Detection of ribosomal RNA gives some insight into the dynamics of a bacterial population since number of ribosomes correlates with the metabolic activity of a cell. However, since rRNAs are extremely stable, they are not suitable targets for discriminating between living and nonliving cells. In contrast, detection of mRNA by hybridization or RT-PCR allows description of the active population relative to the total number of cells. Most of the molecular methods for detection of microorganisms based on intrinsic markers do not require isolation and cultivation of organisms, rather they allow in situ studies of individual members of complex microbial communities. By combined use of several probes with different specificities and by use of fingerprinting methods, different segments of a microbial population can be concurrently assessed. Therefore, the complementary use of several different methods will most likely be needed for accurate description of complex natural and man-made microbial communities.
Acknowledgments K. Lindström is a member of the MAREP Concerted Action sponsored by the European Commission Biotechnology Programme, DGXII.
References 1. Cullen DW, Nicholson PS, Mendum TA et al. Monitoring genetically modified rhizobia in field soils using the polymerase chain reaction. J Appl Microbiol 1998; 84:1025-1034. 2. Olsen P, Wright S, Collins M et al. Patterns of reactivity between a panel of monoclonal antibodies and forage Rhizobium strains. Appl Environ Microbiol 1994; 60:654-661. 3. Faude UC, Höfle MG. Development and application of monoclonal antibodies for in situ detection of indigenous bacterial strains in aquatic ecosystems. Appl Environ Microbiol 1997; 63:4534-4542. 4. Trevors JT, van Elsas JD. A review of selected methods in environmental microbial genetics. Can J Microbiol 1989; 35:895-902. 5. Hames BD, Higgins SJ. Nucleic acid hybridization: a practical approach. Oxford.: IRL Press Ltd., 1985. 6. Saiki RK, Scharf S, Faloona F et al. Enzymatic amplification of β-globin genomic sequences and restriction site analysis for diagnosis of sickle cell anemia. Science 1985; 230:1350-1354. 7. Saiki RK, Gelfand DH, Stoffel S et al. Primer-directed enzymatic amplification of DNA with a thermostable DNA polymerase. Science 1988; 239:487-491. 8. Welsh J, McClelland M. Fingerprinting genomes using PCR with arbitrary primers. Nucleic Acids Res 1990; 24:7213-7218. 9. Williams JGK, Kubelik AR, Livak KJ et al. DNA polymorphisms amplified by arbitrary primers are useful as genetic markers. Nucleic Acids Res 1990; 22:6531-6535.
Detection of Bacteria by Their Intrinsic Markers
65
10. Lin J-J, Kuo J, Ma J. A PCR-based DNA fingerprinting technique: AFLP for molecular typing of bacteria. Nucleic Acids Res 1996; 24:3649-3650. 11. Martin B, Humbert O, Camara M et al. A highly conserved repeated DNA element located in the chromosome of Streptococcus pneumoniae. Nucleic Acids Res 1992; 20:3479-3483. 12. Versalovic J, Koeuth T, Lupski JR. Distribution of repetitive DNA sequences in eubacteria and application to fingerprinting of bacterial genomes. Nucleic Acids Res 1991; 24:6823-6831. 13. Muyzer G, de Waal EC, Uitterlinden AG. Profiling of complex microbial populations by denaturing gradient gel electrophoresis analysis of polymerase chain reaction-amplified genes coding for 16S rRNA. Appl Environ Microbiol 1993; 59:695-700. 14. Bej AK, Steffan RJ, DiCesare J et al. Detection of coliform bacteria in water by polymerase chain reaction and gene probes. Appl Environ Microbiol 1990; 56:307-314. 15. McDonald IR, Kenna EM, Murrell JC. Detection of methanotrophic bacteria in environmental samples with the PCR. Appl Environ Microbiol 1995; 61:116-121. 16. Cascón A, Anguita J, Hernanz C. Identification of Aeromonas hydrophila hybridization group 1 by PCR assays. Appl Environ Microbiol 1996; 62:1167-1170. 17. Shangkuan YH, Show YS, Wang TM. Multiplex polymerase chain reaction to detect toxigenic Vibrio cholerae O1. J Appl Bacteriol 1995; 79:264-273. 18. Hodson RE, Dustman WA, Garg RP et al. In situ PCR for visualization of microscale distribution of specific genes and gene products in procaryotic communities. Appl Environ Microbiol 1995; 61:4074-4082. 19. Ludwig W, Brockmann E, Beimfohr C et al. Nucleic acid based detection systems for genetically modified bacteria. System Appl Microbiol 1995; 18:477-485. 20. von Berg LK-H, Bothe H. The distribution of denitrifying bacteria in soils monitored by DNA-probing. FEMS Microbiol Ecol 1992; 86:331-340. 21. Brockman FJ. Nucleic-acid-based methods for monitoring the performance of in situ bioremediation. Mol Ecol 1995; 4:567-578. 22. Steffan RJ, Atlas RM. DNA amplification to enhance detection of genetically engineered bacteria in environmental samples. Appl Environ Microbiol 1988; 54:2185-2191. 23. Raaijmakers JM, Bitter W, Punte HLM et al. Siderophore receptor PupA as a marker to monitor wild-type Pseudomonas putida WCS358 in natural environments. Appl Environ Microbiol 1994; 60:1184-1190. 24. Jacobsen CS. Microscale detection of specific bacterial DNA in soil with a magnetic capture-hybridization and PCR amplification assay. Appl Environ Microbiol 1995; 61: 3347-3352. 25. Jansson JK. Tracking genetically engineered microorganisms in nature. Curr Opin Biotechnol 1995; 6:275-283. 26. Hwang I, Farrand SK. A novel gene tag for identifying microorganisms released into the environment. Appl Environ Microbiol 1994; 60:913-920. 27. Flemming CA, Leung KT, Lee H et al. Survival of lux-lac-marked biosurfactant-producing Pseudomonas aeruginosa UG2L in soil monitored by nonselective plating and PCR. Appl Environ Microbiol 1994; 60:1606-1613. 28. Van Elsas JD, Van Overbeek LS, Fouchier R. A specific marker, pat, for studying the fate of introduced bacteria and their DNA in soil using a combination of detection techniques. Plant Soil 1991; 138:49-60. 29. Möller A, Gustafsson K, Jansson JK. Specific monitoring by PCR amplification and bioluminescence of firefly luciferase gene-tagged bacteria added to environmental samples. FEMS Microbiol Ecol 1994; 15:193-206. 30. Pillai SD, Pepper IL. Transposon Tn5 as an identifiable marker in rhizobia: survival and genetic stability of Tn5 mutant bean rhizobia under temperature stressed conditions in desert soils. Microb Ecol 1991; 21:21-33. 31. van Elsas JD, Nikkel M, van Overbeek LS. Detection of plasmid RP4 transfer in soil and rhizosphere, and the occurrence of homology to RP4 in soil bacteria. Current Microbiology 1989; 19:375-381.
66
Tracking Genetically-Engineered Microorganisms
32. Gürtler V, Stanisich VA. New approaches to typing and identification of bacteria using the 16S-23S rDNA spacer region. Microbiology 1996; 142:3-16. 33. Amann RI, Ludwig W, Schleifer K-H. Phylogenetic identification and in situ detection of individual microbial cells without cultivation. Microbiol Rev 1995; 59:143-169. 34. Ward DM, Bateson MM, Weller R et al. Ribosomal RNA analysis of microorganisms as they occur in nature. In: Marshall KC, editor. Advances in Microbial Ecology. v. 12. New York: Plenum Press, 1992:219-86. 35. Amann RI. Fluorescently labelled, rRNA-targeted oligonucleotide probes in the study of microbial ecology. Mol Ecol 1995; 4:543-554. 36. Devereux R, Kane MD, Winfrey J et al. Genus- and group-specific hybridization probes for determinative and environmental studies of sulfate-reducing bacteria. System Appl Microbiol 1992; 15:601-609. 37. Briglia M, Eggen RIL, De Vos WM et al. Rapid and sensitive method for the detection of Mycobacterium chlorophenolicum PCP-1 in soil based on 16S rRNA gene-targeted PCR. Appl Environ Microbiol 1996; 62:1478-1480. 38. Young JPW. Phylogeny and taxonomy of rhizobia. Plant Soil 1996; 186:45-52. 39. Olsen GJ, Woese CR. Ribosomal RNA: a key to phylogeny. FASEB J 1993; 7:113-123. 40. Clayton RA, Sutton G, Hinkle PS et al. Intraspecific variation in small-subunit rRNA sequences in GenBank: Why single sequences may not adequately represent prokaryotic taxa. Int J Syst Bacteriol 1995; 45:595-599. 41. Schmidhuber S, Ludwig W, Schleifer KH. Construction of a DNA probe for the specific identification of Streptococcus oralis. J Clin Microbiol 1988; 26:1042-1044. 42. Liang P, Pardee AB. Differential display of eukaryotic messenger RNA by means of the polymerase chain reaction. Science 1992; 257:967-971. 43. Triplett EW, Sadowsky MJ. Genetics of competition for nodulation of legumes. Annu Rev Microbiol 1992; 46:399-428. 44. Paau AS. Improvement of Rhizobium inoculants by mutation, genetic engineering and formulation. Biotech Adv 1991; 9:173-184. 45. Lindström K. Rhizobium galegae, a new species of legume root nodule bacteria. Int J Syst Bacteriol 1989; 39:365-367. 46. Lipsanen P, Lindström K. Infection and root nodule structure in the Rhizobium galegae sp. nov.-Galega symbiosis. Symbiosis 1988; 6:81-96. 47. Lindström K, Jurgens G, Kaijalainen S et al. Rhizobium galegae - properties, phylogeny and molecular identification methods. In: Kiss GB, Endre G, editors. Proceedings of the 1st european nitrogen fixation conference and the workshop “Safe application of genetically modified microorganisms in the environment”. Szeged, Hungary: Officina press, 1994:265-9. 48. Lindström K, Lipsanen P, Kaijalainen S. Stability of markers used for identification of two Rhizobium galegae inoculant strains after five years in the field. Appl Environ Microbiol 1990; 56:444-450. 49. Suominen L, Saano A, Lindström K. Cloning of the host specific gene region of Rhizobium galegae. In: Gresshoff PM, Roth LE, Stacey G, et al., editors. Nitrogen fixation: achievements and objectives. New York: Chapman and Hall, 1990:589. 50. Saano A, Kaijalainen S, Lindström K. Isolation of Rhizobium galegae species-specific DNA probes. In: Gresshoff PM, Roth LE, Stacey G, et al., editors. Nitrogen fixation: achievements and objectives. New York: Chapman and Hall, 1990:575. 51. Tas É, Leinonen P, Saano A et al. Assessment of competitiveness of rhizobia infecting Galega orientalis on the basis of plant yield, nodulation and strain identification by antibiotic resistance and PCR. Appl Environ Microbiol 1996; 62:529-535. 52. Welcher AA, Torres AR, Ward DC. Selective enrichment of specific DNA, cDNA and RNA sequences using biotinylated probes, avidin and copper-chelate agarose. Nucleic Acids Res 1986; 14:10027-10044. 53. Straus D, Ausubel F. Genomic subtraction for cloning DNA corresponding to deletion mutations. Proc Natl Acad Sci USA 1990; 87:1889-1893.
Detection of Bacteria by Their Intrinsic Markers
67
54. Bjourson AJ, Cooper JE. Isolation of Rhizobium loti strain-specific DNA sequences by subtraction hybridization. Appl Environ Microbiol 1988; 54:2852-2855. 55. Streit W, Bjourson AJ, Cooper JE et al. Application of subtraction hybridization for the development of Rhizobium leguminosarum biovar phaseoli and Rhizobium tropici groupspecific DNA probe. FEMS Microbiol Ecol 1993; 13:59-68. 56. Sargent TD, Dawid IB. Differential gene expression in the gastrula of Xenopus levis. Science 1983; 222:135-139. 57. Kunkel LM, Monaco AP, Middleworth W et al. Specific cloning of DNA fragments absent from the DNA of a male patient with an X chromosome deletion. Proc Natl Acad Sci USA 1985; 82:4778-4782. 58. Bjourson AJ, Stone CE, Cooper JE. Combined subtraction hybridization and polymerase chain reaction amplification procedure for isolation of strain-specific Rhizobium DNA sequences. Appl Environ Microbiol 1992; 58:2296-2301. 59. Tas É, Kaijalainen S, Saano A et al. Isolation of a Rhizobium galegae strain-specific DNA probe. Microb Releases 1994; 2:231-237. 60. Darrasse A, Kotoujansky A, Bertheau Y. Isolation by genomic subtraction of DNA probes specific for Erwinia carotovora subsp. atroseptica. Appl Environ Microbiol 1994; 60:298-306. 61. Tas É, Saano A, Leinonen P et al. Identification of Rhizobium spp. in peat-based inoculants by DNA hybridization and PCR and its application in inoculant quality control. Appl Environ Microbiol 1995; 61:1822-1827. 62. Nick G, Lindström K. Use of repetitive sequences and the polymerase chain reaction to fingerprint the genomic DNA of Rhizobium galegae strains and to identify the DNA obtained by sonicating the liquid cultures and root nodules. System Appl Microbiol 1994; 17:265-273. 63. Alm EW, Oerther DB, Larsen N et al. The oligonucleotide probe database. Appl Environ Microbiol 1996; 62:3557-3559. 64. Maidak BL, Cole JR, Parker CTJ et al. A new version of the RDP (Ribosomal Database Project). Nucleic Acids Res 1999; 27:171-173. 65. Gottschal JC, Meijer WG, Oda Y. Use of molecular probing to assess microbial activities in natural ecosystems. In: Insam H, Rangger A, editors. Microbial communities. Berlin: Springer-Verlag, 1997:10-8. 66. Klein PG, Juneja VK. Sensitive detection of viable Listeria monocytogenes by reverse transcription-PCR. Appl Environ Microbiol 1997; 63:4441-4448. 67. Felske A, Akkermans ADL, De Vos WM. Quantification of 16S rRNAs in complex bacterial communities by multiple competitive reverse transcription.PCR in temperature gradient gel electrophoresis fingerprints. Appl Environ Microbiol 1998; 64:4581-4587. 68. Eichner CA, Erb RW, Timmis KN et al. Thermal gradient gel electrophoresis analysis of bioprotection from pollutant schocks in the activated sludge microbial community. Appl Environ Microbiol 1999; 65:102-109. 69. Cheng J, Sheldon EL, Wu L et al. Preparation and hybridization analysis of DNA/RNA from E. coli on microfabricated bioelectronic chips. Nature Biotechnology 1998; 16:541-546. 70. Drolet DW, Moon-McDermott L, Romig TS. An enzyme-linked oligonucleotide assay. Nature Biotechnology 1996; 14:1021-1025. 71. Egholm M, Buchardt O, Christensen L et al. PNA hybridizes to complementary oligonucleotides obeying the Watson-Crick hydrogen-bonding rules. Nature 1993; 365:566-568. 72. Tuerk C, Gold L. Systematic evolution of ligands by exponential enrichment: RNA ligands to bacteriophage T4 DNA polymerase. Science 1990; 249:505-510. 73. Gold L. Oligonucleotides as research, diagnostic and therapeutic agents. J Biol Chem 1995; 270:13581-13584. 74. Langworthy DE, Stapleton RD, Sayler G et al. Genotypic and phenotypic response of a riverine microbial community to polycyclic aromatic hydrocarbon contamination. Appl Environ Microbiol 1998; 64:3422-3428.
68
Tracking Genetically-Engineered Microorganisms
75. Pennanen T, Fritze H, Vanhala P et al. Structure of a microbial community in soil after prolonged addition of low levels of simulated acid rain. Appl Environ Microbiol 1998; 64:2173-2180.
CHAPTER 5
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology James I. Prosser, Antonio J. Palomares, Matti T. Karp and Philip J. Hill
5.1. Introduction
M
olecular marker systems provide the ability to track specific microbial inocula in the environment. This is a fundamental requirement for many ecological studies and is particularly appropriate for the assessment of risks associated with the release of genetically modified microorganisms. The efficiency of a marker system requires the absence of the marker gene, or its phenotype, from the environment under study, stable insertion of the marker genes into the host organism without loss of fitness and efficient and sensitive genotypic and/or phenotypic detection. Techniques for genotypic detection are similar for all marker genes and distinctions therefore arise through differences in efficiency of phenotype detection and the information that this provides. The major advantage of all marker systems over traditional techniques is the increased ability to distinguish specific organisms under study from the indigenous population. Marker systems do, however, require laboratory cultivation of the host strain and ecological studies utilizing marked strains must accept this limitation. This is not, however, a limitation for applications to risk assessment of genetically modified microorganisms, which require growth in the laboratory before release. This article focuses on luminescence-based techniques that involve marking with prokaryotic or eukaryotic genes encoding luciferase, which catalyses light production. They, like all marker systems, increase selective detection of inocula but provide several additional advantages. In particular, they enable rapid and specific measurement of metabolic activity of marked organisms, without cell extraction, and studies of their spatial distribution in environmental samples.
5.2. Lux-Based Systems Bacterial luciferase catalyses the oxidation of FMNH2 and a long chain aldehyde by molecular oxygen to produce FMN and the corresponding acid, with concomitant emission of blue-green light:1 RCHO + O2 + FMNH2 → RCOOH + FMN + H2O + hν (ca. 490 nm in Vibrio spp.) Luciferase is a heterodimeric enzyme of ca. 79 kDa that is cytoplasmic in Vibrio harveyi and membrane-bound in Plesiomonas leiognathi. The reaction2 is initiated by an interaction between FMNH2 and luciferase to produce luciferase-bound FMNH2 (Intermediate I), which Tracking Genetically-Engineered Microorganisms, edited by Janet K. Jansson, Jan Dirk van Elsas, Mark J. Bailey. ©2000 EUREKAH.COM.
70
Tracking Genetically-Engineered Microorganisms
reacts with molecular oxygen to form 4α-hydroperoxy-FMNH (Intermediate II) (Fig. 5.1). In the absence of aldehyde, this decays to generate FMN and hydrogen peroxide with no light emission (dark decay). In the presence of aldehyde, Intermediate III (4α peroxyhemiacetal-FMNH) is formed, which decays to yield the aliphatic acid and an excited emitter, proposed to be a 4α-hydroxy-FMNH species,3 which undergoes a radiative relaxation to emit light. After returning to the ground state, 4α-hydroxy-FMNH decays to generate water and oxidized FMN. Although the in vivo aldehyde substrate appears to be tetradecanal, other long chain aldehydes (e.g., nonanal or decanal) may elicit a bioluminescent response. Enzyme turnover rate is greatly affected by the nature of the aldehyde substrate used, and may differ significantly and characteristically with luciferases from different species.
5.2.1. Genetic Organization of the lux Regulon The genes encoding bacterial luciferase and the other proteins required for bioluminescence are situated in lux operons, which have been most studied in Photobacterium and Vibrio. In Vibrio fischeri, all lux genes can be assigned to two operons, L and R, whose organization is illustrated in Figure 5.2.4 The only known gene in operon L is luxR, which encodes a regulatory protein. Operon R contains luxA and luxB, which code for the α and β subunits of luciferase respectively, and luxC, D, E and I, which respectively code for a fatty acid reductase, an acyl transferase, an acylprotein synthase and synthesis of the ‘autoinducer’, N-(3-oxo-hexanoyl) homoserine lactone, which induces light production in all V. fischeri strains. In V. fischeri strains MJ-1 and ATCC7744 these genes are in the order luxICDABE. The organization of structural genes for bioluminescence in other luminescent bacteria is similar, except that regulatory genes are omitted.5 Another gene, luxF, lying between luxB and luxE and sharing high homology with luxB, has been identified in Photobacterium phosphoreum and P. leiognathi.6,7 An additional gene, luxG, has been identified downstream of luxE in all marine bioluminescent bacteria, but not in any Photorhabdus luminescens
Fig. 5.1. The mechanism of bacterial bioluminescence. L represents luciferase, roman numerals show key intermediates, * indicates excited intermediate.
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology 71
Fig. 5.2. A physical map of the lux regulon.
strains studied,5 and gene luxH has been identified downstream of luxG in V. harveyi.8 These genes are not essential for a bioluminescent phenotype but may be involved in the generation of reduced flavin substrate for the luminescence reaction. All luxA and luxB genes sequenced (e.g., refs. 7,9) show a high degree of sequence homology. The luxA gene shows greater conservation than luxB, consistent with the postulate that the α subunit controls the kinetic properties of the enzyme. Sequence analysis indicates that bacterial luciferases may be subdivided into two distinct classes, the first represented by those from V. fischeri and Photobacterium and the second by V. harveyi, P. luminescens and a symbiont from the fish Kryptophanaron alfredi, the latter group comprising the less heat-labile enzymes. The high homology between α and β subunits both within and between different species indicates that luxA and luxB arose by gene duplication.5 The α subunit appears to be solely responsible for the catalytic activity of the enzyme but the β subunit is essential for functionality, and may be required to maintain the catalytically active conformation of α residues.
5.2.2. Supply of Aldehyde for the Bioluminescent Reaction The bioluminescent reaction requires a long chain aldehyde substrate and tetradecanoic acid appears to be the precursor of the natural substrate tetradecanal.10 A fatty acid reductase complex, responsible for aldehyde synthesis, consists of two distinct functional components;11 acyl protein synthase (50 kDa) which, with cleavage of ATP to AMP, activates the fatty acid to a fatty acyl intermediate, and acyl-protein reductase (58 kDa), responsible for the transfer of the acyl group from the synthase and its subsequent NADPH dependent reduction to release free tetradecanal. A third component, initially identified in P. phosphoreum,12 is a 34 kDa acyl transferase and is acylated only in the presence of the other two polypeptides. It utilizes acyl-acyl carrier protein as substrate to supply free fatty acid to the luminescent system13 but is unnecessary for fatty acid reductase activity in vitro. Aldehyde synthesis involves channeling of tetradecanoic acid from acyl-ACP, by the acyl protein transferase subunit, releasing the free acid to acylate the acyl protein synthase in an ATP dependent reaction. After removal of AMP, the acyl group is transferred in a freely reversible reaction to the acyl protein reductase subunit, which, utilizing the reducing power of NADPH, releases free tetradecanal. This aldehyde is oxidized by luciferase, with concomitant light emission, back to the fatty acid that may then be recycled.
72
Tracking Genetically-Engineered Microorganisms
5.2.3. Expression Vectors for Bacterial Luciferases Cloning vectors using insertional inactivation of luxAB as a marker gene, instead of the ubiquitous LacZα complementation, have been reported, but most published uses of luciferase encoding plasmid vectors concern their use in the study of DNA control sequences. For example, the construction of vectors containing promoters upstream of luxAB with a polylinker between the promoter and lux genes allows for the identification of transcriptional terminators as evidenced by decreased bioluminescence of clones containing terminators.14 Many luxAB containing plasmids have been employed as promoter probe vectors, allowing detection and determination of strength of promoter DNA cloned upstream of luxAB or a whole lux operon. Many such vectors are available for use in gram-negative and grampositive bacteria. Another method of promoter probing is to use transposons. In addition to providing insertional inactivation of chromosomal genes, lux-containing transposons may allow the expression of target genes to be monitored on the basis of bioluminescence. A number of such transposons have been reported, including a miniMu-lux in E. coli and other gram-negative bacteria,15 Tn5 derivatives containing luxAB in Pseudomonas16 and other bacteria and a Tn1721 derivative in X. campestris.17 These transposon systems have been used successfully to identify environmentally responsive genes,18 maintain a constitutive expression of bioluminescence in normally dark bacteria,19 for promoter probing16 and in the characterization of loci for phytopathogenicity.17 More recently, mini-Tn5 derivatives containing the whole lux operon from P. luminescens, obviating the need to add exogenous aldehyde, have been constructed and shown to be effective in many gram-negative organisms.20 Shuttle plasmid vectors, constructed for expression of either bacterial or insect luciferase genes in grampositive and gram-negative strains, have been found to lead to high levels of light emission which could be measured in real-time from intact cells.21
5.3. Luc-Based Systems Although bacterial luciferases are most frequently used as markers for environmental use, strains carrying the firefly luciferase or other insect luciferase genes can provide advantages. The enzymes from insects are in general more heat stable, are not subject to substrate inhibition and their quantum yield (90%) is considerably higher than that of bacterial luciferase (5-10%). Firefly luciferase requires luciferin, a heterocyclic carboxylic acid, oxygen and ATP as substrates. The requirement for ATP is very specific and firefly luciferase cannot utilize other nucleotide triphosphates. In the presence of magnesium and molecular oxygen, luciferase catalyses the oxidative decarboxylation of luciferin, resulting in the production of light and oxyluciferin, with hydrolysis of ATP. D-Luciferin + ATP + Mg → Luciferase-luciferyl-AMP + PPi Luciferase-luciferyl-AMP + O2 → oxyluciferin + AMP+CO2 + light This reaction has a quantum yield of 0.88 photons emitted per luciferin oxidized, and is the most efficient luminescent reaction known.22 The best-characterized firefly luciferase is that of the common North American firefly Photinus pyralis, from which luciferase has been purified and the luciferin substrate determined.23 SDS-polyacrylamide gel electrophoresis of purified P. pyralis luciferase shows a single band of protein with an apparent molecular weight of 62,000.24 Only one dehydroluciferyl adenylate, a substrate intermediate analogue, binds per luciferase dimer although there are two ATP and two luciferin binding sites.25 This suggests that the two subunits in the dimer may be different, but it has not been possible to separate physically two forms of the protein.
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology 73
A potential disadvantage of luc systems is the requirement for exogenous addition of luciferin. However, uptake of D-luciferin is efficient at slightly acidic conditions, e.g., pH values of 5 and 6 for E. coli26 and Streptococcus mutans,27 respectively. A thermostable variant of firefly luciferase has also been generated by genetic engineering28 and is able to sustain temperatures up to 50˚C for 60 minutes, in vitro. The color of light emitted by firefly luciferase varies between species. P. pyralis emits yellow-green light, with the peak emission occurring at 562 nm. This color can be shifted to red in vitro by adding divalent metal cations, such as zinc, by increasing the temperature, or by reducing the pH to below 7.0.22 Light emitted by other species of firefly ranges from green (550 nm) to yellow (579 nm), possibly reflecting adaptation to the time of night during which fireflies are active. Twilight-active species tend to emit yellow light that should be more visible against the background light than the green light of dark-active species. The Jamaican click beetle, Pyrophorus plagiophthalamus, has a pair of dorsal organs that emit bright green light (543 nm) and a ventral organ that emits yellow-orange light (582 nm).22 The color of light emitted is a property of the luciferase, rather than the luciferase substrate or filtering of the light by pigments.22 The ability of all beetle luciferases to utilize synthetic P. pyralis luciferin suggests that all synthesize very similar luciferin, and that differences in the color of the emitted light must be due to structural differences in the luciferases themselves. Furthermore, there must be extensive conservation in the overall structure of the beetle luciferases since they must all possess the same substrate binding sites. This is supported by the observation that anti-P. pyralis luciferase antibodies recognize luciferases from the six species of firefly tested as well as the luciferase from the click beetle P. plagiophthalamus. Fireflies have long life cycles and are not easily maintained in the laboratory, making genetic approaches to the study of firefly luciferase impractical. The cloning and expression of firefly luciferase genes in heterologous systems, however, enables the creation of mutant luciferases in vitro by means of recombination technology.
5.3.1. Expression Vectors Using Eukaryotic Luciferases as Bacterial Markers The eukaryotic nature and presumed absence of firefly and click beetle luciferase genes may provide a unique genotype to bacteria and the variation in wavelength of emitted light provides an additional advantage. To exploit this difference in luciferase assays, luc and lucOR genes, which encode emission of light at 560 nm (yellow-green) and 595 nm (orange), respectively, have been used to develop marker genes for bacteria employing three transcriptional units (Fig. 5.3). The first, an antitetracycline PI promoter, provides considerable constitutive expression when P1::luc and P1::lucOR are borne on ColE1 plasmids, but luciferase activity decreases when both fusions are borne on a RK2 derivative plasmid. This reduction is due to the presence of a tetR gene in the parental plasmid pRK293 or to differences in copy number. A second system, cI857-λPR, provides a highly regulated promoter which is useful for marking cells for environmental release, as it may be silenced in the natural environment, avoiding the use of nutrients or energy in marker synthesis. In the presence of the cI857 repressor gene, λPR is a well-regulated promoter,29 as found when the PI::luc fusion is expressed in E. coli in either ColE1 or RK2 replicons. Detection of marked organisms requires induction of the marker gene, allowing identification on solid media or in enrichment broth. In the presence of the cI857 gene, λPR is not efficiently regulated in some gram-negative bacteria but constitutive expression of either luc or lucOR from λPR can be achieved efficiently in a range of bacteria. 30 λPR expresses high levels of luciferase activity, which are easily detected constitutively. The third system involves a strong promoter, Ptrc, which provides higher and better-regulated luminescence in bacteria that express lucOR and leads to greater in vivo luciferase activity in E. coli and other gram-negative bacteria. Ptrc is effective in a range of bacterial hosts and, following induction, yields
74
Tracking Genetically-Engineered Microorganisms
Fig. 5.3. Plasmids constructed to study the expression of eukaryotic luciferases under the control of different promoters in gram-negative bacteria. All of the plasmids were based on the RK2 derivative pRK293. Fragments with the represented fusions of luc and lucOR were cloned in the sites of pRK293 indicated. B, BamHI; Bg, BglII; C, ClaI; H, HindIII S, SalI; X, XhoI. Reprinted with permission from Cebolla A, Vázquez ME, Palomares AJ. Appl Environ Microbiol 1995; 61:660-668.
higher levels of luminescence than other constructs.31 Use of λPR::luc and λP R::lucOR enables distinction between Pseudomonas putida colonies emitting light of different wavelengths30 (Fig. 5.4).
5.4. Methodology Luminescence-marked organisms can be monitored using several techniques. Lux and luc genes may be detected by gene probing, but the major advantages of luminescence marker systems lie in the ability to detect light.
5.4.1. Detection of Luminescence by Eye and by Photographic and X-ray Film Viable cell enumeration of luciferase-marked strains can be achieved using traditional dilution plate counting and luminescent colonies can usually be detected by the unaided eye in a darkened room.32 Greater sensitivity can be achieved using photographic film (with long exposure), X-ray film or photon imaging (see below). The majority of luciferase-marked strains are also marked with antibiotic resistance (see Chapter 2), enabling selectivity against indigenous populations by enumeration on media supplemented with the appropriate antibiotic. In the absence of antibiotic resistance markers, selective enumeration depends on the competitive ability of the marked strain on enumeration media, the nutrients required for luminescence and the sensitivity of detection. Nevertheless, visual detection of a single luminescent colony of lux-marked Erwinia carotovora is possible in the presence of 3000 nonluminescent colonies.32 Similar techniques may be used for in situ detection of luminescent strains. Photography has also been used to compare in vivo activities of firefly and click
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology 75
Fig. 5.4. Luminescence emitted by two strains of Pseudomonas putida containing plasmids pAP2 and pACR3 with PR::luc and PR::lucOR fusions, respectively. Cells were incubated on nitrocellulose filters placed on solid medium, incubated for 30 h and photographed under normal illumination (A) and after 30 min exposure in the dark. Reprinted with permission from Cebolla A, Vázquez ME, Palomares AJ. Appl Environ Microbiol 1995; 61:660-668.
beetle luciferase in E. coli cultures on nitrocellulose filters, with exposure for 10-15 minutes.30 Similar examination of E. coli streaks on solid media demonstrated the four colors of bioluminescence emitted by different click beetle luciferases, with 2 s exposure time.33 This approach has also been used to determine regions of plants infected with lux-marked pathogenic bacteria 34 and for detection of luciferase activity in alfalfa nodules induced by R. meliloti containing a nifH::luc fusion.35
5.4.2. Luminometry The major advantage of lux- and luc- marker systems lies in the relationship between luminescence and cell activity enabling assessment of the activity of marked organisms by quantification of luminescence, by luminometry. In organisms in which luciferase production is constitutive and where luminescence per cell is maximal, or constant, total light emission is proportional to biomass concentration. This occurs in exponentially growing cultures, with proportionality between luminescence and biomass concentration over several orders of magnitude.27,36 The convenience and validity of this approach depend on the nature of the construct. For example, constitutive luciferase production may be achieved by chromosomal marking with luxA and luxB genes, but luminescence requires addition of dodecanal and incubation under optimal conditions. Cellular production of dodecanal is achieved in cells additionally marked with luxCDE genes, but the additional genetic load may affect the physiological characteristics of the marked organism. Increased luminescence may also be achieved by increasing lux-or luc- gene copy number, for example, in plasmid marked strains, although this increases the likelihood of decreased host fitness and stability.37 Finally, use of luminometry in samples with particulate material reduces sensitivity. Lower detection limits using luminome try therefore depend on a number of factors. For example, detection limits for chromosomally and plasmid-marked strains of P. fluorescens in cell suspensions were 1.7 x 103 and 8.9 x 104 cells ml-1, respectively. Equivalent detection limits in inoculated autoclaved sterile soil were 8.1 x 103 and 3.0 x 105 cell g-1, respectively,
76
Tracking Genetically-Engineered Microorganisms
while inoculation into nonsterile soil increased detection limits to 5.9 x 104 and 2.2 x 105 cells g-1, possibly through greater competition for nutrients.38 An added advantage of chromosomal marking is the frequent lack of apparent effect on host fitness. In the environment, conditions are likely to be variable and sub-optimal for luminescence. Luminometry of untreated samples will therefore provide a measure of the activity of marked organisms under nutritional and environmental conditions prevailing at the time of sampling. Luminescence activity is equivalent to that measured using traditional techniques, e.g., dehydrogenase activity39 but luminometric measurements are considerably more sensitive, convenient and rapid, with results within several minutes of sampling. More importantly, luminometry assesses the activity of the marked population only, in the presence of high indigenous populations, while traditional activity techniques, e.g., enzyme assays, substrate conversion rates, provide information on the total population. The technique is also sufficiently sensitive to detect the activity of viable but nonculturable populations.40 Luminescence assays may be modified to assess biomass by amendment with nutrients and incubation under optimal conditions.41 This measure of potential luminescence is equivalent to other measures of potential activity, e.g., the substrate induced respiration method.
5.4.3.Photon Imaging Quantitative imaging of gene expression using luciferase based reporter constructs is now possible due to the availability of extremely sensitive imaging equipment that can be calibrated using light standards. These camera systems are usually based on image intensifiers coupled to video cameras, or cooled charge coupled device (CCD) technology. Intensified cameras have high sensitivity and the ability to watch the image form almost in realtime but, at high gain, suffer from reduction in spatial resolution. Cooled CCD systems rely on capturing the image during a single long exposure. They have extremely low noise and wide dynamic range and are increasingly available, leading to a reduction in cost of this technology. The sensitivity of many cooled CCD cameras can be significantly increased by pixel binning, although this reduces spatial resolution. Both systems may be configured for microscopic analysis or imaging of macro samples. They are often supplied with flexible image processing software that allows the user to count areas, quantify signals and superimpose images. Examples of the power of this technology to assess gene expression, even in highly complex environments, include assessment of mas gene (mannopine synthesis) expression by Agrobacterium tumefaciens in different tobacco plant tissues during infection42 and the coupling of luxAB with the nitrogenase promoters of nifD and nifH from Bradyrhizobium japonicum, enabling imaging of luciferase expression in single soybean root nodules and, indeed, in single bacteroid infected cells.43
5.5. Applications 5.5.1. Stable Tagging of Bacteria with Firefly Luciferase Gene for Environmental Monitoring Gram-negative strains engineered for in situ applications must meet a number of practical requirements for safe and efficient performance. These include not only the absence of traits that may give them an advantage over nonengineered strains but also the ability to retain the acquired genotype and phenotype in the absence of selection. Use of firefly luciferase addresses the first of these concerns, since D-luciferin is expected to be absent from all prokaryotic cells and the enzyme is unlikely to provide any advantage over the wild type. Stable inheritance of the marker gene, in the absence of selective pressure, can be achieved by chromosomal marking using the mini-Tn5 system.44 A HindIII fragment containing only
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology 77
the λPR promoter and the luc genes was isolated and cloned into pUC18Not. The NotI fragment with the luc gene was cloned into the unique NotI site of pUT/mini-Tn5 Sm/Sp and into pUTKm. The resulting plasmids, pTCR210 and pTCR240, were selected for studies of transposition and luciferase expression in various gram-negative bacteria. 36 To tag bacteria without the use of antibiotic resistance genes, the Km resistance gene may be replaced with the lPR::luc fusion. To attenuate the expression in the environment, where the marked strain must survive, and to allow sensitive detection, a DNA fragment containing the repressor gene lacIq and a PR::lucOR fusion has been introduced on a suicide plasmid. PTEB510 (Fig. 5.5) is a representative of constructs able to express high luciferase levels only when induced by IPTG. Transposition frequencies were suitable for marking purposes and the levels of luminescence were sufficient for detection by the standard methods.
Fig. 5.5. Construction of suicide orange click beetle luciferase plasmids used for marking gramnegative bacteria. The selective markers are flanked by Tn5 19-bp terminal ends (I end and O end). The IS50R tnp gene devoid of NotI sites (tnp*) is oriented divergently from the I end. Restriction sites: E, EcoR1; Nt, NotI; Xb, XbaI; H, HindIII; B, BamHI; S, SalI; P, PstI; Bg, BglII. Reprinted with permission from Vázquez ME, Cebolla A, Palomares, AJ. FEMS Microbiol Lett 1994; 121:11-18.
78
Tracking Genetically-Engineered Microorganisms
5.5.2. Determination of Rhizobium Nodule Occupancy by Luminescence The symbiotic interaction between rhizobia and leguminous plants results in the formation of root nodules through a number of stages determined by different sets of genes both in the microsymbiont and macrosymbiont. Quantification of nodule occupancy is required to determine the competitiveness of two or more strains in producing and occupying nodules. Luminescence marking of bacteria that interact with plants provides a simple and highly sensitive system for their detection, particularly under conditions in which light emission is directly related to cell concentration. Palomares et al.45 compared luc-marked R. meliloti strain CR201 with the wild-type strain, R. meliloti 1021. To determine the competitiveness of the marked luminescent strain, alfalfa plants were inoculated with suspensions containing known proportions of each strain. Luminescent and nonluminescent cells isolated from nodules were enumerated by plate counting and the proportions of the two strains were equal to those in the inocula. Under the experimental conditions employed, light emission was linearly related to luciferase activity over at least four orders of magnitude.46 Luciferase activity was then determined in bacteroid suspensions taken from nodules inoculated with different proportions of luminescence-marked cells and was found to be directly related to viable cell concentrations. Direct measurement of luminescence of cells isolated from nodules provides many advantages over other methods. In particular, it does not require plating and is less laborious and less time consuming than alternative marker phenotypes that require colony formation.
5.5.3. Eukaryotic Luciferase Markers for Assessment of Plasmid Transfer in Soil Environments Most studies of gene transfer in the soil have focused on conjugal transfer and there are concerns regarding the transfer of the genetically engineered DNA sequences to indigenous microorganisms. Vázquez and Palomares46 have established a model system for plasmid transfer analysis involving constructs obtained using the lambda promoter, λPR, and the luciferase genes luc and lucOR (see above). This promoter is regulated by the thermosensitive repressor cI857 that is active at 28˚C but not at 42˚C, at which temperature the promoter, λPR, is induced. A luciferase fusion system was constructed consisting of cI857-λPR::luc and cI857λPR::lucOR which is temperature-inducible in E. coli. Expression was constitutive at 28˚C and luminescence could be detected using either luc or lucOR genes when the plasmids were mobilized to other backgrounds. Use of luciferase genes encoding emission of either green or orange light demonstrated transfer from RK2 derivative plasmids, incompatibility group IncP (pACR4 and pACR18), and from R388 derivative plasmids, incompatibility group IncW (pET2), either in vitro or in microcosms of sterile and nonsterile soil. Mobilization from RK2 and R388 derivatives to P. putida 2440 (co-introduced with donors) or indigenous soil organisms was demonstrated. High transfer frequencies were found for both plasmid groups in assays on solid media. The experiments in sterile soil enabled assessment of the influence of abiotic environmental parameters on gene transfer; in this case transfer frequency was two orders of magnitude lower than on solid media, perhaps due to physical separation between donor and receptor.
5.5.4. Survival and Resuscitation of Microbial Inocula Luminescence-based markers provide the ideal strategy for risk assessment of genetically engineered microorganisms following their release into the environment. This requires monitoring of population size and activity to quantify survival, growth and recovery following periods of stress or starvation. An example of this approach is assessment of the effect of matric potential on the survival of a strain of Pseudomonas fluorescens, 10586s/ FAC510, chromosomally marked with lux genes and kanamycin resistance.47 This strain
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology 79
was inoculated into microcosms containing autoclaved or nonautoclaved soil after adjustment of matric potential to -30, -750 or -1500 kPa. Selective viable cell enumeration was achieved by plate counting on media containing kanamycin and population activity was measured by luminometry, radiorespirometry and dehydrogenase activity. Matric potential did not significantly affect survival, as determined by plate counts, but survival was significantly greater in autoclaved soil at higher matric potentials. This may be due to reduced competition and predation, as protozoan movement will be lower at the lowest matric potential. Luminescence activity decreased rapidly following inoculation, and at a greater rate than viable cell counts, and was the most sensitive indicator of effects of matric potential and autoclaving. It was also found to be significantly more sensitive, reproducible and convenient as a measure of population activity than traditional techniques of radiorespirometry and dehydrogenase activity in autoclaved soil. More importantly, in nonautoclaved soil, luminescence provided a measure of the marked organism only in the presence of a significant indigenous microbial population. Potential luminescence involved assessment of luminescence during incubation with nutrients and indicated the speed of recovery of starved organisms. Early samples showed no increase in luminescence during the incubation period at the highest matric potentials, indicating little inactivation immediately following inoculation, but significant increases were observed during incubation of samples from soil at the lowest matric potential. The rate of recovery and final potential luminescence values decreased with time spent by cells in the soil and with decreasing matric potential, and were lowest in nonautoclaved soil. Samples taken from nonautoclaved soil at the lowest matric potential after 28 days showed no recovery. This suggests that P. fluorescens, inoculated into soil at this matric potential, would have negligible environmental impact within four weeks of inoculation, as any available substrates would be rapidly utilized by competing indigenous organisms. Conversely, the lack of persistence of activity of this organism might question its suitability in performing the function for which it was originally designed. A combination of viable cell enumeration, luminescence and potential luminescence measurements therefore provides information which is of relevance and importance to both risk assessment and the development of more efficient microbial inocula.
5.5.5. Predation The ability to detect luminescence activity of specific marked strains has been exploited to determine the effect of predation by protozoa on bacterial prey.48 Soil microcosms were inoculated with lux-marked bacterial cells (P. fluorescens) at specific matric potentials to ensure their location in small (neck size < 6 µm) or intermediate size (neck size 6-30 µm) pores, while Colpoda steinii was introduced to large pores (neck size 30-60 µm) (Fig. 5.6). Viable cell concentrations of both populations were monitored and bacterial activity was assessed by luminometry. Bacteria in intermediate pores were predated at a greater rate than those introduced to small pores, and decreases in bacterial viable cell concentration were associated with increases in the ciliate population. Small pores therefore appear to provide protection from predation. Luminescence decreased, following inoculation, due to loss of bacterial activity through lack of nutrients and this effect was greater in the presence of the ciliate, due to predation. However, luminescence activity per cell was significantly greater for cells introduced into intermediate-sized pores, where predation was greatest. This suggests that predation, although reducing numbers of bacteria, results in the release and turnover of nutrients by the ciliate such that surviving bacterial cells have greater activity. Demonstration of this effect using traditional activity techniques was not possible because of problems in distinguishing between bacterial and ciliate activity.
80
Tracking Genetically-Engineered Microorganisms
Fig. 5.6. Changes in a) viable cell concentration, b) luminescence and c) luminescence viable cell-1 following introduction of P. fluorescens into small pores (neck diameter < 6 µm) (o, •) or intermediate-sized pores (neck diameter 6-30 µm) (❏, ■) and introduction of sterile water (o, ❏) or C. steinii (•, ■) into large pores (neck diameter 30-60 µm). Error bars are minimum significant difference values calculated from two way analysis of variance for p ≤ 0.05. Bars are omitted where treatments were not significantly different (p > 0.05). Reprinted with permission from Wright D, Killham K, Glover LA et al. Appl Environ Microbiol 1995; 61:3537-3543.
5.5.6. Biosensors Use of living cells as biosensors offers several advantages over enzyme-based or other biosensors. Most importantly, analytical systems that require a sequence of biochemical reactions are greatly simplified by using cells within which all the reactions are conveniently packaged, and carried out efficiently in an optimal environment. In addition, production of bacterial-based biosensors is easily scaled-up, as only minor down-stream processing is needed after bacterial cultivation. Luminescence-based microbial biosensors for total toxicity have been developed and commercialized using naturally luminescent bacteria 49 and measure toxicity as quenching of luminescence following exposure of cells to a sample. Response times are short, ranging from few seconds50 to tens of minutes and operation is simple and does not require highly trained personnel or expensive instrumentation. Use of recombinant luminescent strains for general toxicity testing is now under evaluation for commercial products.51 One example is the assessment of inhibition of protein synthesis by strains of E. coli marked with prokaryotic or eukaryotic luciferase, using the strong bacteriophage λ leftward promoter.52 This provides several-hundred-fold induction in less than ten minutes and incubation prior to and after induction of protein synthesis enables distinction between effects on protein synthesis and direct metabolic inhibition. The test can be performed with lyophilized bacteria in less
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology 81
than an hour and no bacterial cultivation is required, making it suitable for rapid and extremely sensitive detection of environmental samples.
5.6.1. Heavy Metal Sensors Regulatory elements from bacteria resistant to a heavy metal can provide a sensitive and selective receptor for heavy metal bioavailability53, 54 which will function in physiological concentration ranges. Genetic determinants for heavy metal resistance are usually found on plasmids and transposons of soil bacteria, which facilitate their analysis and manipulation by molecular genetic techniques. Many have been characterized, including mercury,55 arsenite,56 cadmium,57,58 zinc,59 cobalt,59 chromate,60 and copper.61 The first specific biosensor for bioavailable mercury was constructed utilizing firefly luciferase as a reporter gene.62 The regulatory unit of the mercury resistance operon from plasmid R100 was introduced into a plasmid vector pCSS810 21 to control the expression of firefly luciferase. Detection by this sensor strain, E. coli/pTOO11, gave a detection limit of approximately 1 fM HgCl2 (0.2 ppt Hg) and luminescence increased with increasing Hg (II) concentration. Selectivity was high, with interference only from cadmium at concentrations 108-fold higher than mercury. Sensitivity was sufficiently low for measurement of mercury in unpolluted natural waters, in which the concentration range is 2 - 60 ppt Hg.63 The detection limit of the routine method is approximately 200 ppt. A similar mercury sensor based on the usage of luciferase genes of Vibrio harveyi had a detection limit for mercury of 10 nM.64 Heavy metal sensors therefore operate at concentration ranges that are relevant to metal contamination of the environment, and that will be very useful in the future. An important feature is their amenability to lyophilisation, ensuring long shelf life (up to several years) and reagent-like usage.65, 66
5.6.2. Stress and Xenobiotics Sensors Bacteria in natural environments must protect themselves from a range of toxic insults, e.g., increased temperature, ultraviolet light, oxidative stress, redox-cycling xenobiotics and heavy metals. Protective mechanisms are best understood in E. coli in which exposure of aerobically growing cells to redox-cycling agents induces roughly 80 proteins.67 Stress response promoters have been utilized to generate stress biosensors. For example, plasmids have been constructed in which DNA damage-inducible promoters recA, uvrA, and alkA from E. coli have been fused to the V. fischeri luxCDABE operon.68 This allowed detection of a dose-dependent response to DNA-damaging agents, such as mitomycin and UV irradiation. A panel of such strains of lux biosensors may have use in monitoring chemical, physical, and genotoxic agents as well as in further characterizing the mechanisms of DNA repair. Individual strains from this panel will exhibit differential responses to specific stress conditions dependent on the regulatory circuit controlling the expression.69 A tod-luxCDABE fusion has been constructed and introduced into the chromosome of Pseudomonas putida F1.70 This strain was used to examine the induction of the tod operon when exposed to benzene, toluene, ethylbenzene and xylene (BTEX) compounds and aqueous solutions of JP-4 jet fuel constituents. Since this system contained the complete lux cassette (luxCDABE), bacterial bioluminescence in response to putative chemical inducers of the tod operon was measured on-line in whole cells without added aldehyde substrate. The sensor cells described above, together with specific heavy metal sensing strains, could be immobilized to an array of sensing elements and connected to a sensitive detector. This kind of biosensor might provide a more definitive understanding on the contents of complex environments through on-line monitoring of, for example, paper mill effluents and waste-water treatment plants.
82
Tracking Genetically-Engineered Microorganisms
5.7. Conclusion All molecular marker systems enable the detection of tagged organisms through gene probing and viable cell enumeration. The major additional advantages offered by luminescence markers lie in the ability to detect light emission by marked organisms. This provides a degree of selective enumeration by colony counting, but is particularly valuable as a means of assessing real time, in situ metabolic activity of marked organisms, for instance in studies of spatial organization of organisms against background indigenous populations. Both prokaryotic and eukaryotic systems may be exploited and a range of vectors for each is available. Luminescence genes have also been used for assessment of general metabolic activity and as reporters of specific gene function. A range of relatively inexpensive methods is available for detection and luminescence-based markers have been used to study a variety of organisms and environments. The approach has particular advantages for monitoring of genetically engineered microorganisms released into the environment and, increasingly, in biosensor applications, and represents a powerful technique for fundamental studies of microbial ecology.
Acknowledgments MK acknowledges support from Maj and Tor Nessling Foundation. AJP acknowledges support to Spanish Ministry of Education, Junta de Andalucia and Fundación Ramón Areces. All authors are members of the MAREP Concerted Action sponsored by the European Commission Biotechnology Programme, DGXII.
References 1. Engebrecht J, Silverman M. Identification of genes and gene products necessary for bacterial bioluminescence. Proc Natl Acad Sci USA 1984; 81:4154-4158. 2. Eberhard A, Hastings JW. A postulated mechanism for the bioluminescent oxidation of reduced flavin mononucleotide. Biochem Biophys Res Comm 1972; 47:348-353. 3. Kurfurst M, Ghisla S, Hastings, JW. Characterization and postulated structure of the primary emitter in the bacterial luciferase reaction. Proc Natl Acad Sci USA 1984; 81:2990-2994. 4. Devine JH, Countryman C, Baldwin TO. Nucleotide sequence of the luxR and luxI genes and structure of the primary regulatory region of the lux regulon of Vibrio fischeri ATCC7744. Biochem 1988; 27:837-842. 5. Meighen EA. Molecular biology of bacterial bioluminescence. Microbiol Rev 1991; 55:123-142. 6. Soly RR, Mancini JA, Ferri, SR et al. A new lux gene in bioluminescent bacteria codes for a protein homologous to the bacterial luciferase subunits. Biochem Biophys Res Comm 1988; 155:351-358. 7. Baldwin TO, Devine JH, Heckel RC et al. The complete nucleotide sequence of the lux regulon of Vibrio fischeri and the luxABN region of Photobacterium leiognathi and the mechanism of control of bacterial bioluminescence. J Biolum Chemilum 1989; 4:326-341. 8. Swartzman E, Miyamoto C, Graham A et al. Delineation of the transcriptional boundaries of the lux operon of Vibrio harveyi demonstrates the presence of two new lux genes. J Biol Chem 1990; 265:3513-3517. 9. Meighen EA, Szittner RB. Multiple repetitive elements and organization of the lux operons of luminescent terrestrial bacteria. J Bacteriol 1992; 174:5371-5381. 10. Ulitzur S, Hastings JW. Evidence for tetradecanal as the natural aldehyde in bacterial bioluminescence. Proc Natl Acad Sci USA 1979; 76:265-267. 11. Riendeau D, Rodriguez A, Meighen, E. Resolution of the fatty acid reductase from Photobacterium phosphoreum into acyl protein synthetase and acyl-CoA reductase activities. J Biol Chem 1982; 257:6908-6915. 12. Rodriguez AL, Reindeau D, Meighen E. Fatty acid acylation of proteins in bioluminescent bacteria. Biochem 1983; 22:5604-5611.
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology 83 13. Byers DM, Meighen EA. Acyl-acyl carrier protein as a source of fatty acids for bacterial bioluminescence. Proc Natl Acad Sci USA 1985; 82:6085-6089. 14. Peabody DS, Andrews CL, Escudero, KW et al. A plasmid vector and quantitative techniques for the study of transcription termination in Escherichia coli using bacterial luciferase. Gene 1989; 75:289-296. 15. Engebrecht J, Simon M, Silverman M. Measuring gene expression with light. Science 1985; 227:1345-1347. 16. Lorenzo V, Herrero M, Jakubzik U et al. Mini-Tn5 transposon derivatives for insertion mutagenesis, promoter probing, and chromosomal insertion of cloned DNA in gram-negative eubacteria. J Bact 1990; 172:6568-6572. 17. Shaw J J, Settles LG, Kado CI. Transposon Tn4431 mutagenesis of Xanthomonas campestris pv. campestris: Characterization of a nonpathogenic mutant and cloning of a locus for pathogenicity. Mol Plant-microbe Interactions 1988; 1:39-45. 18. Wolk CP, Cai Y, Panoff, J-M. Use of a transposon with luciferase as a reporter to identify environmentally responsive genes in a cyanobacterium. Proc Natl Acad Sci USA 1991; 88:5355-5359. 19. Boivin R, Chalifour F-P, Dion P. Construction of a Tn5 derivative encoding bioluminescence and its introduction in Pseudomonas, Agrobacterium and Rhizobium. Mol Gen Genet 1988; 213:50-55. 20. Winson MK, Swift S, Hill PJ et al. Engineering the luxCDABE genes from Photorhabdus luminescens to provide a bioluminescent reporter for constitutive and promoter probe plasmids and mini-Tn5 constructs. FEMS Microbiol Lett 1998; 163:193-202. 21. Lampinen J, Koivisto L, Wahlsten M et al. Expression of luciferase genes from different origins in Bacillus subtilis. Mol Gen Genet 1992; 232:498-504. 22. Seliger HH, McElroy WD. Spectral emission and quantum yield of firefly bioluminescence. Arch Biochem Biophys 1960; 88:136-141. 23. Seliger HH, McElroy WD, White EH et al. Stereospecificity and firefly luminescence, a comparison of natural and synthetic luciferin. Proc Natl Acad Sci USA 1961; 47:1129-1134. 24. Wood KV, de Wet JR, Dewji N et al. Synthesis of active firefly luciferase by in vitro translation of RNA obtained from adult lanterns. Biochem Biophys Res Commun 1984; 124:592-596. 25. McElroy WD, DeLuca, M. Chemistry of firefly luminescence. In: Herring PJ ed. Bioluminescence in Action. Academic Press, London., 1978:109-127. 26. Wood KV, DeLuca M. Photographic detection of luminescence in Escherichia coli containing the gene for firefly luciferase. Anal Biochem 1987; 161:501-507. 27. Loimaranta V, Tenovuo J, Koivisto L et al. Generation of bioluminescent Streptococcus mutans and its usage in rapid analysis of antimicrobial compounds. Antimicrob Agents Chemother 1998; 42:1906-1910. 28. Kajiyama N, Nakano E. Enhancement of thermostability of firefly luciferase from Luciola lateralis by a single amino acid substitution. Biosci Biotechnol Biochem 1994; 58:1170-1171. 29. Denhardt DT, Colasanti J. A survey of vectors for regulating expression of cloned DNA in E. coli. In: Rodriguez RL, Denhardt DT eds. Vectors: a survey of molecular cloning vectors and their use. Butterworth Publishers, Stoneham, Mass. 1987:179-203. 30. Cebolla A, Vázquez ME, Palomares AJ. Expression vectors for the use of eukaryotic luciferases as bacterial markers with different colors of luminescence. Appl Environ Microbiol 1995; 61:660-668. 31. Vázquez ME, Cebolla A, Palomares, AJ. Controlled expression of click beetle luciferase using a bacterial operator-repressor system. FEMS Microbiol Lett 1994; 121:11-18. 32. Grant FA, Glover LA, Killham K et al. Luminescence-based viable cell enumeration of Erwinia carotovora in the soil. Soil Biol Biochem 1991; 23:1021-1024. 33. Wood KV, Lam YA, Seliger, HH et al. Complementary DNA coding click beetle luciferases can elicit bioluminescence of different colors. Science 1989; 244:700-702. 34. Shaw JJ, Dane F, Geiger D et al. Use of bioluminescence for detection of genetically engineered microorganisms released into the environment. Appl Environ Microbiol 1992; 58:267-273.
84
Tracking Genetically-Engineered Microorganisms
35. Cebolla A, Ruiz F, Palomares AJ. Expression and quantification of firefly luciferase under control of Rhizobium meliloti symbiotic promoters. J Biolumin Chemilumin 1991; 6:177-184. 36. Cebolla A, Ruiz F, Palomares AJ. Stable tagging of Rhizobium meliloti with firefly luciferase gene for environmental monitoring. Appl Environ Microbiol 1993; 59, 2511-2519. 37. Coronado C, Vázquez ME, Cebolla A et al. Use of firefly luciferase gene for plasmid copy number determination. Plasmid 1994; 32:336-341. 38. Amin-Hanjani S, Meikle A, Glover LA et al. Plasmid and chromosomally encoded luminescence marker systems for detection of Pseudomonas fluorescens in soil. Mol Ecol 1993; 2:47-54. 39. Meikle A, Killham K, Prosser JI et al. Luminometric measurement of population activity of genetically modified Pseudomonas fluorescens in the soil. FEMS Microbiol Lett 1992; 99:217-220. 40. Duncan S, Glover LA, Killham K et al. Luminescence-based detection of activity of starved and viable but nonculturable bacteria. Appl Environ Microbiol 1994; 60:1308-1316. 41. Meikle A, Glover LA, Killham K et al. Potential luminescence as an indicator of activation of genetically modified Pseudomonas fluorescens in liquid culture and in soil. Soil Biol Biochem 1994; 26:747-755. 42. Langridge WHR, Fitzgerald KJ, Koncz C et al. Dual promoter of Agrobacterium tumefaciens mannopine synthase genes is regulated by plant growth hormones. Proc Natl Acad Sci USA 1989; 86:3219-3223. 43. O’Kane DJ, Lingle WL, Wampler JE et al. Visualization of bioluminescence as a marker of gene expression in Rhizobium infected soybean root nodules. Pl Mol Biol 1988; 10:387-399. 44. Herrero M, de Lorenzo V, Timmis K. Transposon vectors containing non antibiotic resistance selection markers for cloning and stable chromosomal insertion of cloned genes in gram-negative bacteria. J Bacteriol 1990; 172:6557-6567. 45. Palomares AJ, Vázquez ME, Cebolla A. Determination of Rhizobium nodule occupancy by luminescence. In: Hasting JW, Kricka LJ, Stanley PE eds. Bioluminescence and Chemiluminescence. Molecular Reporting with Photons. John Wiley and Sons, New York. 1997: 383-386. 46. Vázquez ME, Palomares AJ. Eukaryotic luciferase markers as monitoring methods for plasmid transfer analysis in soil environment In: Hasting JW, Kricka LJ, Stanley PE eds. Bioluminescence and Chemiluminescence. Molecular Reporting with Photons. John Wiley and Sons, New York. 1997:387-390. 47. Meikle A, Amin-Hanjani S, Glover LA et al. The effect of matric potential on survival and activity of a Pseudomonas fluorescens inoculum in soil. Soil Biol Biochem 1995; 27:881-892. 48. Wright D, Killham K, Glover LA et al. The role of pore size location in determining bacterial activity during protozoal predation. Appl Environ Microbiol 1995; 61:3537-3543. 49. Ribo JM, Kaiser KLE. Photobacterium phosphoreum, toxicity bioassay. Tox Assessm 1987; 2:305-323. 50. Lappalainen J, Juvonen R, Vaajasaari K et al. A new flash method for measuring the toxicity of solid and colored samples. 1998; Chemosphere:38,1069-1083. 51. Lampinen J, Virta M, Karp M. Use of controlled luciferase expression for monitoring of chemicals affecting protein synthesis. Appl Environ Microbiol 1995; 61:2981-2989. 52. Lampinen, J, Virta M, Karp, M. Comparison of gram-negative and grampositive bacterial strains cloned with different types of luciferase genes in bioluminescence cytotoxicity tests. Environ Toxicol Wat Qual 1995; 10:157-166. 53. O’Halloran TV. Transition metals in control of gene expression. Science 1993; 261:715-725. 54. Silver S, Walderhaug M. Gene regulation of plasmid- and chromosome-determined inorganic ion transport in bacteria. Microbiol Rev 1992; 56:195-228. 55. Summers AO. Organization, expression, and evolution of genes for mercury resistance. Ann Rev Microbiol 1986; 40:607-34. 56. Silver SK, Budd KM, Leahy WV et al. Inducible plasmid-determined resistance to arsenate, arsenite and antimony(III) in Escherichia coli and Staphylococcus aureus. J Bacteriol 1981; 146:983-996.
Luminescence-Based Microbial Marker Systems and Their Application in Microbial Ecology 85 57. Nucifora G, Chu L, Misra TK et al. Cadmium resistance from Staphylococcus aureus plasmid pI258 cadA gene results from cadmium-efflux ATPase. Proc Natl Acad Sci USA 1989; 86:3544-3548. 58. Tauriainen S, Karp M, Chang W et al. Luminescent bacterial sensor for cadmium and lead. Biosensors Bioelectronics 1998; 13:931-938. 59. Nies DH, Silver S. Plasmid-determined inducible efflux is responsible for resistance to cadmium, zinc, and cobalt in Alcaligenes eutrophus. J Bacteriol 1989; 171:896-900. 60. Peitzsch N, Eberz G, Nies DH. Alcaligenes eutrophus as a bacterial chromate sensor. Appl Environ Microbiol 1998; 64:453-458. 61. Cha J-S, Cooksey DA. Copper resistance in Pseudomonas syringae mediated by periplasmic and outer membrane proteins. Proc Natl Acad Sci USA 1991; 88:8915-8919. 62. Virta M, Lampinen J, Karp M. A luminescence-based mercury biosensor. Anal Chem 1995; 34:667-669. 63. Tescione L, Belfort G. Construction and evaluation of a metal ion biosensor. Biotechnol Bioeng 1993; 42:945-952. 64. Condee CW, Summers AO. A mer-lux transcriptional fusion for real-time examination of in vivo gene expression kinetics and promoter response to altered superhelicity. J Bacteriol 1992; 174:8094-8101. 65. Tauriainen S, Karp M, Chang W et al. A luminescence-based biosensor for arsenite and antimonite. Appl Environ Microbiol 1997; 63:4456-4461. 66. Ramanathan S, Ensor M, Daunert S. Bacterial biosensors for monitoring toxic metals. Trends Biotechnol 1997; 15:500-506. 67. Greenberg JT, Demple D. A global response induced in Escherichia coli by redox-cycling agents overlaps with that induced by peroxide stress. J Bacteriol 1989; 171:3933-3939. 68. Vollmer AC, Belkin S, Smulski DR et al. Detection of DNA damage by use of Escherichia coli carrying recA’::lux, uvrA’::gram, or alkA’::lux reporter plasmids. Appl Environ Microbiol 1997; 63:2566-2571. 69. Ben-Israel O, Ben-Israel H, Ulitzur S. Identification and quantification of toxic chemicals by use of Escherichia coli carrying lux genes fused to stress promoters. Appl Environ Microbiol 1998; 64:4346-4352. 70. Applegate, BM, Kehrmeyer SR, Sayler GS. A chromosomally based tod-luxCDABE wholecell reporter for benzene, toluene, ethylbenzene, and xylene (BTEX) sensing. Appl Environ Microbiol 1998; 64:2730-2735.
CHAPTER 6
The Use of the GUS Reporter System to Study Molecular Aspects of Interactions Between Bacteria and Plants M. Lambrecht, A. Vande Broek and J. Vanderleyden
6.1. Introduction
T
he most important criterion for an ideal marker/reporter system for rhizosphere bacteria is the absence of endogenous activity in the microbe of interest and in its natural environment. Other criteria include inexpensive use of substrates and/or material necessary to detect the marker, the availability of simple though sensitive, nondestructive, and histochemical assays to detect the strain or gene activity in planta, and un