i
Technical textile yarns
© Woodhead Publishing Limited, 2010
ii
The Textile Institute and Woodhead Publishing The Textile Institute is a unique organisation in textiles, clothing and footwear. Incorporated in England by a Royal Charter granted in 1925, the Institute has individual and corporate members in over 90 countries. The aim of the Institute is to facilitate learning, recognise achievement, reward excellence and disseminate information within the global textiles, clothing and footwear industries. Historically, The Textile Institute has published books of interest to its members and the textile industry. To maintain this policy, the Institute has entered into partnership with Woodhead Publishing Limited to ensure that Institute members and the textile industry continue to have access to high calibre titles on textile science and technology. Most Woodhead titles on textiles are now published in collaboration with The Textile Institute. Through this arrangement, the Institute provides an Editorial Board which advises Woodhead on appropriate titles for future publication and suggests possible editors and authors for these books. Each book published under this arrangement carries the Institute’s logo. Woodhead books published in collaboration with The Textile Institute are offered to Textile Institute members at a substantial discount. These books, together with those published by The Textile Institute that are still in print, are offered on the Woodhead website at: www.woodheadpublishing.com. Textile Institute books still in print are also available directly from the Institute’s website at: www.textileinstitutebooks.com. A list of Woodhead books on textile science and technology, most of which have been published in collaboration with The Textile Institute, can be found towards the end of the contents pages.
© Woodhead Publishing Limited, 2010
iii
Woodhead Publishing Series in Textiles: Number 101
Technical textile yarns Industrial and medical applications
Edited by R. Alagirusamy and A. Das
CRC Press Boca Raton Boston New York Washington, DC
Woodhead
publishing limited
Oxford Cambridge New Delhi
© Woodhead Publishing Limited, 2010
iv Published by Woodhead Publishing Limited in association with The Textile Institute Woodhead Publishing Limited, Abington Hall, Granta Park, Great Abington, Cambridge CB21 6AH, UK www.woodheadpublishing.com Woodhead Publishing India Private Limited, G-2, Vardaan House, 7/28 Ansari Road, Daryaganj, New Delhi – 110002, India www.woodheadpublishingindia.com Published in North America by CRC Press LLC, 6000 Broken Sound Parkway, NW, Suite 300, Boca Raton, FL 33487, USA First published 2010, Woodhead Publishing Limited and CRC Press LLC © Woodhead Publishing Limited, 2010 The authors have asserted their moral rights. This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. Reasonable efforts have been made to publish reliable data and information, but the authors and the publishers cannot assume responsibility for the validity of all materials. Neither the authors nor the publishers, nor anyone else associated with this publication, shall be liable for any loss, damage or liability directly or indirectly caused or alleged to be caused by this book. Neither this book nor any part may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, microfilming and recording, or by any information storage or retrieval system, without permission in writing from Woodhead Publishing Limited. The consent of Woodhead Publishing Limited does not extend to copying for general distribution, for promotion, for creating new works, or for resale. Specific permission must be obtained in writing from Woodhead Publishing Limited for such copying. Trademark notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation, without intent to infringe. British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library. Library of Congress Cataloging in Publication Data A catalog record for this book is available from the Library of Congress. Woodhead Publishing ISBN 978-1-84569-549-1 (book) Woodhead Publishing ISBN 978-1-84569-947-5 (e-book) CRC Press ISBN 978-1-4398-3154-0 CRC Press order number N 10203 The publishers’ policy is to use permanent paper from mills that operate a sustainable forestry policy, and which has been manufactured from pulp which is processed using acid-free and elemental chlorine-free practices. Furthermore, the publishers ensure that the text paper and cover board used have met acceptable environmental accreditation standards. Typeset by Replika Press Pvt Ltd, India Printed by TJ International Limited, Padstow, Cornwall, England
© Woodhead Publishing Limited, 2010
v
Contents
Contributor contact details
xi
Woodhead Publishing series in Textiles
xv
Part I Advances in textile yarn production 1
Introduction: types of technical textile yarn R. Chattopadhyay, Indian Institute of Technology, Delhi, India
3
1.1 1.2 1.3
3 4
1.10 1.11
Introduction Types of technical yarn Yarn characteristics: continuous filament, staple, core spun, plied/folded, cabled and braided yarns Yarn production: mono- and multifilament, tape, staple, core spun, folded and other yarns Characterization of yarn: dimensional parameters, packing of fibres and twist Structure of twisted yarn Properties and performance of technical yarns Properties of yarns: mono- and multifilament, tape, spun, wrap spun, core spun and plied/cord yarns Applications of mono- and multifilament, tape, core spun, plied and cabled yarns Market References
2
Advances in yarn spinning and texturising R. V. M. Gowda, V.S.B. Engineering College, India
56
2.1 2.2 2.3
Introduction to various yarn spinning technologies Compact spinning Rotor spinning
56 57 61
1.4 1.5 1.6 1.7 1.8 1.9
© Woodhead Publishing Limited, 2010
4 9 26 32 37 43 48 53 54
vi
Contents
2.4 2.5 2.6 2.7 2.8 2.9 2.10
Friction spinning Air-jet spinning Vortex spinning Core yarn spinning Wrap spinning Developing particular yarn properties Yarn texturising: technologies, developments and applications Future trends References
2.11 2.12 3
3.1 3.2 3.3
Modification of textile yarn structures for functional applications A. Das, Indian Institute of Technology, Delhi, India
67 70 72 74 80 82 85 89 89 91
3.4 3.5 3.6
Introduction Modifying textile yarn structures by bulking Modification of textile yarn structures by incorporating micro-pores Twistless and hollow yarns Future trends References
4
Yarn hairiness and its reduction A. Majumdar, Indian Institute of Technology, Delhi, India
112
4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9
Introduction Factors influencing yarn hairiness Yarn hairiness measurement Importance of yarn hairiness Modelling of yarn hairiness Yarn hairiness reduction Conclusions Acknowledgement References
112 113 117 122 125 128 137 137 137
5
Coatings for technical textile yarns A. Jalal Uddin, Ahsanullah University of Science and Technology, Bangladesh
140
5.1 5.2 5.3 5.4 5.5
Introduction Textile coating and laminating Coating formulations for technical textile yarns Coating polymers for technical textile yarns Choice of substrates for yarn coating
140 141 144 144 162
© Woodhead Publishing Limited, 2010
91 92 100 102 110 110
Contents
vii
5.6 5.7 5.8 5.9 5.10
Principles of yarn coating Methods and machinery for yarn coating Applications and properties of some coated yarns Future trends References
163 170 176 182 183
6
Engineering finer and softer textile yarns J. Srinivasan, Kumaraguru College of Technology, India
185
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8
Introduction: importance of finer and softer yarns Methods of engineering finer and softer yarns Structure of fine yarns Properties of fine yarns Applications Future trends Sources of further information and advice References
185 186 201 203 204 205 209 209 215
7
Assessing the weavability of technical yarns
B. K. Behera, Indian Institute of Technology, Delhi, India
7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8
Weavability of yarns Importance of weavability in industrial fabrics Factors influencing yarn weavability Warp breakage mechanism Analysis of warp breakage mechanism Evaluation of weavability Weavability of synthetic filament yarn Sizing of micro-denier yarns for achieving desired weavability Bibliography
7.9 8
8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8
Yarn imaging and advances in measuring yarn characteristics R. Fangueiro and F. Soutinho, University of Minho, Portugal Introduction Image processing techniques in fibrous material structures Yarn characterization Special advances in measuring yarn characteristics Online systems for measuring yarn quality Future trends Sources of further information and advice References
© Woodhead Publishing Limited, 2010
215 216 216 221 223 223 226 229 230 232 232 235 236 245 247 254 254 255
viii
Contents
Part II Types of technical yarns 9
Novel technical textile yarns
259
A. Jalal Uddin, Ahsanullah University of Science and Technology, Bangladesh
9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8
Introduction Reflective yarns UV protected yarns Metallic and metalloplastic yarns Antimicrobial yarns Yarns for specific purposes Future trends References
259 259 266 273 282 287 292 293
10
Electro-conductive textile yarns M. Latifi, P. Payvandy and M. Yousefzadeh-Chimeh, Amirkabir University of Technology (Tehran Polytechnic), Iran
298
10.1 10.2 10.3 10.4 10.5 10.6
Introduction Manufacture and structure of electro-conductive yarns Measurements Applications Future trends References
298 299 309 313 316 326 329
11
High modulus, high tenacity yarns
H. Hu and Y. Liu, The Hong Kong Polytechnic University, Hong Kong
11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9
Introduction Glass fibers and yarns Carbon fibers and yarns Ceramic fibers and yarns Basalt fibers and yarns Aramid fibers and yarns High-performance polyethylene (HPPE) fibers and yarns Sources of further information and advice References
329 330 345 360 365 370 378 382 384 387
12
Hybrid yarns for thermoplastic composites
R. Alagirusamy, Indian Institute of Technology, Delhi, India
12.1 12.2
Introduction Types of hybrid yarns
© Woodhead Publishing Limited, 2010
387 389
Contents
12.3 12.4
ix
400
12.5 12.6 12.7 12.8 12.9
Characterization of hybrid yarns Manufacture of thermoplastic composites with hybrid yarns Compaction and consolidation of hybrid yarns Hybird yarn structure – composite property relations Potential application areas of thermoplastic composites Trends in thermoplastic composite applications References
13
Shape memory polymer yarns
429
405 407 413 421 422 426
T. Wan, Nanjing University of Information Science and Technology, P. R. China
13.1 13.2 13.3 13.4 13.5 13.6 13.7
Introduction Thermo-mechanical behaviour of shape memory polymers (SMPs) Manufacture of shape memory polymer (SMP)-based yarns Applications Future trends Conclusion References
429
452
431 434 437 444 448 448
14
Plasma-treated yarns for biomedical applications
B. Gupta, S. Saxena, N. Grover and A. R. Ray, Indian Institute of Technology, Delhi, India
14.1 14.2 14.3 14.4 14.5
Introduction Chemistry of plasma processing Biomedical applications Conclusions References
452 457 468 487 488 495
15
Technical sewing threads
R. S. Rengasamy and S. Ghosh, Indian Institute of Technology, Delhi, India
15.1 15.2 15.3 15.4
Introduction Industrial sewing threads Surgical threads/sutures for medical applications References
495 495 513 532 534
16
Biodegradable textile yarns
S. Mukopadhyay, Indian Institute of Technology, Delhi, India
16.1
Introduction: principles and importance of sustainable yarns © Woodhead Publishing Limited, 2010
534
x
Contents
16.2 16.3 16.4 16.5 16.6 16.7 16.8
Fibres from biodegradable polymers of natural origins Spinning of PLA polymers Electrospinning Fibres from biodegradable polymers from mineral origins Applications of biodegradable fibres/yarns Conclusion References
17
Yarn and fancy yarn design using three-dimensional computer graphics and visualisation techniques W. Tang, University of Teesside, UK and T. R. Wan, University of Bradford, UK
17.1 17.2
536 537 548 551 560 564 565 568
568
17.6 17.7
Introduction 3D computer graphics and visualisation technologies for cloths and yarns Microstructures of yarns and fancy yarns Mathematical modelling of yarn and fancy yarn structures Descriptions of a computer aided design (CAD) system for yarn and fancy yarn structures Conclusion References
Index
586
17.3 17.4 17.5
© Woodhead Publishing Limited, 2010
570 573 573 579 583 585
xi
Contributor contact details
(* = main contact)
Chapter 1
Chapter 4
R. Chattopadhyay Department of Textile Technology Indian Institute of Technology, Delhi New Delhi 110016 India
A. Majumdar Department of Textile Technology Indian Institute of Technology, Delhi New Delhi 110016 India
E-mail:
[email protected]
E-mail:
[email protected]
Chapter 2
Chapters 5 and 9
R. V. M. Gowda V.S.B. Engineering College NH 67, Covai Road Karudayamplayam P.O. Karur – 639 111, Tamil Nadu India
Ahmed Jalal Uddin Department of Textile Technology Ahsanullah University of Science and Technology Dhaka 1208 Bangladesh E-mail:
[email protected]
E-mail:
[email protected]
Chapter 6
Chapter 3 A. Das Department of Textile Technology Indian Institute of Technology, Delhi New Delhi 110016 India
J. Srinivasan Kumaraguru College of Technology Coimbatore 641 006 India E-mail:
[email protected]
E-mail:
[email protected]
© Woodhead Publishing Limited, 2010
xii
Contributor contact details
Chapter 7
Chapter 11
B. K. Behera Department of Textile Technology Indian Institute of Technology, Delhi New Delhi 110016 India
Dr Hong Hu* and Mr Yanping Liu Institute of Textiles and Clothing The Hong Kong Polytechnic University Hung Hom Kowloon Hong Kong
E-mail:
[email protected]
E-mail:
[email protected] [email protected]
Chapter 8 Dr R. Fangueiro* and F. Soutinho Department of Textile Engineering University of Minho Campus de Azurém 4800-058 Guimarães Portugal E-mail:
[email protected]
Chapter 12 R. Alagirusamy Department of Textile Technology Indian Institute of Technology, Delhi New Delhi 110016 India E-mail:
[email protected]
Chapter 10 Professor M. Latifi*, Dr P. Payvandy and Dr M. Yousefzadeh-Chimeh Department of Textile Engineering Textile Research and Excellence Centers Amirkabir University of Technology (Tehran Polytechnic) Hafez Avenue Tehran 15875-4413 Iran
Chapter 13 Dr T. Wan School of Maths and Physics Nanjing University of Information Science and Technology Nanjing 210044 P. R. China E-mail:
[email protected]
E-mail:
[email protected] [email protected] [email protected]
© Woodhead Publishing Limited, 2010
Contributor contact details
Chapter 14
Chapter 17
Dr B. Gupta*, S. Saxena, N. Grover and A. R. Ray Department of Textile Technology and Centre for Biomedical Engineering, Indian Institute of Technology, Delhi New Delhi 110016 India
Dr W. Tang* School of Computing University of Teesside Middlesbrough Tees Valley TS1 3BA UK
E-mail:
[email protected]
Chapter 15 Dr R. S. Rengasamy* and Dr S. Ghosh Indian Institute of Technology, Delhi New Delhi 110016 India
E-mail:
[email protected]
T. R. Wan School of Informatics University of Bradford Bradford West Yorkshire BD7 1DP UK E-mail:
[email protected]
E-mail:
[email protected]
Chapter 16 Dr S. Mukopadhyay Department of Textile Technology Indian Institute of Technology, Delhi New Delhi 110016 India E-mail:
[email protected]
© Woodhead Publishing Limited, 2010
xiii
xiv
xv
Woodhead Publishing Series in Textiles
1 Watson’s textile design and colour Seventh edition Edited by Z. Grosicki 2 Watson’s advanced textile design Edited by Z. Grosicki 3 Weaving Second edition P. R. Lord and M. H. Mohamed 4 Handbook of textile fibres Vol 1: Natural fibres J. Gordon Cook 5 Handbook of textile fibres Vol 2: Man-made fibres J. Gordon Cook 6 Recycling textile and plastic waste Edited by A. R. Horrocks 7 New fibers Second edition T. Hongu and G. O. Phillips 8 Atlas of fibre fracture and damage to textiles Second edition J. W. S. Hearle, B. Lomas and W. D. Cooke 9 Ecotextile ’98 Edited by A. R. Horrocks 10 Physical testing of textiles B. P. Saville 11 Geometric symmetry in patterns and tilings C. E. Horne 12 Handbook of technical textiles Edited by A. R. Horrocks and S. C. Anand 13 Textiles in automotive engineering W. Fung and J. M. Hardcastle 14 Handbook of textile design J. Wilson 15 High-performance fibres Edited by J. W. S. Hearle
© Woodhead Publishing Limited, 2010
xvi
Woodhead Publishing Series in Textiles
16 Knitting technology Third edition D. J. Spencer 17 Medical textiles Edited by S. C. Anand 18 Regenerated cellulose fibres Edited by C. Woodings 19 Silk, mohair, cashmere and other luxury fibres Edited by R. R. Franck 20 Smart fibres, fabrics and clothing Edited by X. M. Tao 21 Yarn texturing technology J. W. S. Hearle, L. Hollick and D. K. Wilson 22 Encyclopedia of textile finishing H-K. Rouette 23 Coated and laminated textiles W. Fung 24 Fancy yarns R. H. Gong and R. M. Wright 25 Wool: Science and technology Edited by W. S. Simpson and G. Crawshaw 26 Dictionary of textile finishing H-K. Rouette 27 Environmental impact of textiles K. Slater 28 Handbook of yarn production P. R. Lord 29 Textile processing with enzymes Edited by A. Cavaco-Paulo and G. Gübitz 30 The China and Hong Kong denim industry Y. Li, L. Yao and K. W. Yeung 31 The World Trade Organization and international denim trading Y. Li, Y. Shen, L. Yao and E. Newton 32 Chemical finishing of textiles W. D. Schindler and P. J. Hauser 33 Clothing appearance and fit J. Fan, W. Yu and L. Hunter 34 Handbook of fibre rope technology H. A. McKenna, J. W. S. Hearle and N. O’Hear 35 Structure and mechanics of woven fabrics J. Hu 36 Synthetic fibres: nylon, polyester, acrylic, polyolefin Edited by J. E. McIntyre
© Woodhead Publishing Limited, 2010
Woodhead Publishing Series in Textiles 37 Woollen and worsted woven fabric design E. G. Gilligan 38 Analytical electrochemistry in textiles P. Westbroek, G. Priniotakis and P. Kiekens 39 Bast and other plant fibres R. R. Franck 40 Chemical testing of textiles Edited by Q. Fan 41 Design and manufacture of textile composites Edited by A. C. Long 42 Effect of mechanical and physical properties on fabric hand Edited by Hassan M. Behery 43 New millennium fibers T. Hongu, M. Takigami and G. O. Phillips 44 Textiles for protection Edited by R. A. Scott 45 Textiles in sport Edited by R. Shishoo 46 Wearable electronics and photonics Edited by X. M. Tao 47 Biodegradable and sustainable fibres Edited by R. S. Blackburn 48 Medical textiles and biomaterials for healthcare Edited by S. C. Anand, M. Miraftab, S. Rajendran and J. F. Kennedy 49 Total colour management in textiles Edited by J. Xin 50 Recycling in textiles Edited by Y. Wang 51 Clothing biosensory engineering Y. Li and A. S. W. Wong 52 Biomechanical engineering of textiles and clothing Edited by Y. Li and D. X-Q. Dai 53 Digital printing of textiles Edited by H. Ujiie 54 Intelligent textiles and clothing Edited by H. Mattila 55 Innovation and technology of women’s intimate apparel W. Yu, J. Fan, S. C. Harlock and S. P. Ng 56 Thermal and moisture transport in fibrous materials Edited by N. Pan and P. Gibson 57 Geosynthetics in civil engineering Edited by R. W. Sarsby
© Woodhead Publishing Limited, 2010
xvii
xviii
Woodhead Publishing Series in Textiles
58 Handbook of nonwovens Edited by S. Russell 59 Cotton: Science and technology Edited by S. Gordon and Y-L. Hsieh 60 Ecotextiles Edited by M. Miraftab and A. R. Horrocks 61 Composite forming technologies Edited by A. C. Long 62 Plasma technology for textiles Edited by R. Shishoo 63 Smart textiles for medicine and healthcare Edited by L. Van Langenhove 64 Sizing in clothing Edited by S. Ashdown 65 Shape memory polymers and textiles J. Hu 66 Environmental aspects of textile dyeing Edited by R. Christie 67 Nanofibers and nanotechnology in textiles Edited by P. Brown and K. Stevens 68 Physical properties of textile fibres Fourth edition W. E. Morton and J. W. S. Hearle 69 Advances in apparel production Edited by C. Fairhurst 70 Advances in fire retardant materials Edited by A. R. Horrocks and D. Price 71 Polyesters and polyamides Edited by B. L. Deopura, R. Alagirusamy, M. Joshi and B. S. Gupta 72 Advances in wool technology Edited by N. A. G. Johnson and I. Russell 73 Military textiles Edited by E. Wilusz 74 3D fibrous assemblies: Properties, applications and modelling of threedimensional textile structures J. Hu 75 Medical textiles 2007 Edited by J. F. Kennedy, S. C. Anand, M. Miraftab and S. Rajendran 76 Fabric testing Edited by J. Hu 77 Biologically inspired textiles Edited by A. Abbott and M. Ellison
© Woodhead Publishing Limited, 2010
Woodhead Publishing Series in Textiles 78 Friction in textile materials Edited by B. S. Gupta 79 Textile advances in the automotive industry Edited by R. Shishoo 80 Structure and mechanics of textile fibre assemblies Edited by P. Schwartz 81 Engineering textiles: Integrating the design and manufacture of textile products Edited by Y. E. El-Mogahzy 82 Polyolefin fibres: industrial and medical applications Edited by S. C. O. Ugbolue 83 Smart clothes and wearable technology Edited by J. McCann and D. Bryson 84 Identification of textile fibres Edited by M. Houck 85 Advanced textiles for wound care Edited by S. Rajendran 86 Fatigue failure of textile fibres Edited by M. Miraftab 87 Advances in carpet technology Edited by K. Goswami 88 Handbook of textile fibre structure Volume 1 and Volume 2 Edited by S. J. Eichhorn, J. W. S. Hearle, M. Jaffe and T. Kikutani 89 Advances in knitting technology Edited by K.-F. Au 90 Smart textile coatings and laminates Edited by W. C. Smith 91 Handbook of tensile properties of textile and technical fibres Edited by A. R. Bunsell 92 Interior textiles: Design and developments Edited by T. Rowe 93 Textiles for cold weather apparel Edited by J. T. Williams 94 Modelling and predicting textile behaviour Edited by X. Chen 95 Textiles for construction Edited by G. Pohl 96 Engineering apparel fabrics and garments J. Fan and L. Hunter 97 Surface modification of textiles Edited by Q. Wei
© Woodhead Publishing Limited, 2010
xix
xx
Woodhead Publishing Series in Textiles
98 Sustainable textiles Edited by R. S. Blackburn 99 Advanced fibre spinning Edited by C. Lawrence 100 Fire toxicity Edited by A. Stec and R. Hull 101 Technical textile yarns Edited by R. Alagirusamy and A. Das 102 Nonwovens in technical textiles Edited by R. Chapman 103 Colour measurement in textiles Edited by M. L. Gulrajani 104 Textiles for civil engineering Edited by R. Fangueiro 105 New product development in textiles Edited by B. Mills 106 Improving comfort in clothing Edited by G. Song 107 Textile biotechnology Edited by V. Nierstrasz 108 Textiles for hygiene Edited by B. McCarthy 109 Nanofunctional textiles Edited by Y. Li 110 Joining textiles Edited by I. Jones and G. Stylios 111 Soft computing in textiles Edited by A. Majumdar 112 Textile design Edited by A. Briggs-Goode and K. Townsend 113 Biotextiles as medical implants Edited by M. King and B. Gupta 114 Textile thermal bioengineering Edited by Y. Li 115 Woven textile structure B. K. Behera and P. K. Hari
© Woodhead Publishing Limited, 2010
1
Introduction: types of technical textile yarn
R. C h a t t o p a d h y a y, Indian Institute of Technology, Delhi, India
Abstract: Yarns which are used for manufacturing technical textile products are known as technical yarns. These yarns are designed primarily to meet some technical requirements of a product. Yarns used for apparel are excluded. Technical yarns have been classified according to their structural form and the raw material used in their manufacture. A brief outline of the production techniques is given. Yarn geometry and response to tensile deformation are discussed. Properties expected from this structure and form are analysed. Application and market potential are also reported. Key words: technical yarn, technical textile, yarn spinning, yarn structure, yarn property.
1.1
Introduction
Textiles have been used for centuries to meet apparel and domestic needs. Uses of textiles in these two sectors are dominant even today. Textiles have also been used to meet various technical functions such as for ropes, sailing cloth, etc. Textile products whose primary objective is to meet some technical requirements or functions are termed technical textiles. Hence, traditional apparel and home textile products are outside the domain of technical textiles. With time, technical usage of textiles has been growing. The development of new fibres and new processing technology is widening the areas of application. Technical textiles have been categorized on the basis of their use in different sectors of the industry and termed agrotech, buildtech, geotech, hometech, indutech, packtech, meditech, sporttech, etc. [1]. The forms in which technical textile products are available are thread, tape, woven, knitted, braided, knotted and non-woven fabric. Of all these forms, only non-woven products are made straight from staple fibres or short natural fibres, whereas for the rest the basic raw material is yarn. The yarns used could be in two different forms: a twisted assembly of continuous filaments or staple fibres, or a parallel assembly of filaments. The yarns are interlaced or looped together to form woven, knitted, braided or knotted products. Sometimes, the slender filaments are first transformed into a bulky yarn and then used in this form in some applications.
3 © Woodhead Publishing Limited, 2010
4
Technical textile yarns
1.2
Types of technical yarn
Technical yarns can be classified on the basis of ∑ ∑
source, i.e. raw material, or structure and form.
Depending upon the fibre used, they can be classified as natural or artificial, and tenacity-wise further into low, high and very high tenacity yarns (Fig. 1.1). Based on the fibre, the yarns can be designated as cotton, silk, nylon or polyester, Kevlar or carbon fibre yarns. Natural fibre yarns are mostly used in low load-bearing applications. Biodegradability is one of the most important factors favouring the use of natural fibres in many technical applications. Classification on the basis of structure and form is shown in Table 1.1. Yarns can be designated as filament, tape, spun, core spun, plied, braided, etc. It is possible that many yarns may have a dual use in both non-technical and technical applications.
1.3
Yarn characteristics: continuous filament, staple, core spun, plied/folded, cabled and braided yarns
The general characteristics of the yarns classified according to their structure and form are discussed below.
1.3.1 Continuous filament yarns A filament yarn could be of either monofilament or multifilament type.
Raw material
Artificial
Natural
Low tenacity
High tenancity
High tenacity
Very high tenacity
Cotton Wool Silk Jute
Flax Ramie Hemp
Nylon Polyester Polyethylene Polypropylene
Carbon Aramid Glass
1.1 Classification of technical yarns according to raw material.
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
5
Table 1.1 Classification on the basis of structure and form Type
Structure
Filament Monofilament, smooth Multifilament, smooth Tape Flat Spun yarn Uneven surface, hairy Core spun yarn Distinct core and sheath Plied/cabled Combination of single/plied yarns Braided Combination of single yarns
Form Rod-like Twisted Untwisted Twisted Untwisted Twisted Core twisted or untwisted Sheath wrapped Twisted Interlaced
Monofilament yarn
1.2 Some fibre cross-sectional shapes.
Monofilament Technical monofilament yarn consists of a single, solid filament having a diameter in the range of 100–2000 mm (0.1–2.0 mm). The cross-sectional shape of the filament can be varied depending upon the end use (Fig. 1.2). It could be circular (Fig. 1.3(a)) or profiled (i.e. triangular, multilobal, serrated, oval, dog-bone), solid or hollow. The surface could be smooth or structured. A non-circular cross-section encourages wicking. The surface area of the fibre increases as the cross-sectional shape becomes more and more non-circular. Monofilaments have high bending rigidity and more resistance to abrasive damage. The diameter of the monofilament depends upon its application. Multifilament A multifilament yarn (Fig. 1.3(b)) is a bunch of thin continuous monofilaments of infinite length. The filaments are assembled together to form a coherent strand through incorporation of a nominal amount of twist known as producer’s twist. The cross-sectional shape of the filaments decides how closely the fibres can be brought together in the yarn. A non-circular cross-section
© Woodhead Publishing Limited, 2010
6
Technical textile yarns
(a)
(b)
(c)
(d)
(e)
(f)
(g)
1.3 (a) Monofilament, (b) multifilament, (c) commingled yarn, (d) tape yarn, (e) fibrillated tape yarn, (f) spun yarn, (g) core spun yarn.
inhibits close proximity between the fibres in the yarn and hence bulky or voluminous yarns are produced from them. Porous polyester fibres with pore radii in the range of 5–1500 mm enable the fibre to absorb water and dry rapidly. Circular fibres promote closeness and therefore give the yarn a lean look. The yarns are smooth, compact, dense and uniform, with maximum fibre strength exploitation. Multifilament yarns are much more flexible than the equivalent monofilament yarns. Intermingled/commingled yarn This is essentially a filament yarn. However, instead of twist holding the fibres together, the filaments are intermingled or entangled in order to avoid their separation during processing. When filaments of the same type are entangled, the yarn is known as an intermingled yarn; and when filaments of two or more types, e.g. carbon and polyester, are mingled together, the yarn is known as commingled yarn. The yarn looks tight at the mingle points which are distributed at regular intervals along the yarn length (Fig. 1.3(c)). The mingle points hold the filaments together. Tape yarns A tape yarn is basically a thin, narrow, ribbon-like film produced from a synthetic polymeric material such as polyethylene, polyamide or polyester
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
7
(Fig. 1.3(d)). A flat polymeric sheet or film is sliced into a large number of narrow tapes 20–40 mm in width with a thickness of 60–100 microns for technical applications. A tape may be further split or fibrillated (Fig. 1.3(e)) mechanically to produce a regular network of interconnected fibres which gives it a multifilament yarn-like texture.
1.3.2 Staple yarns Spun or staple yarns are linear assemblies of short discontinuous fibres. Synthetic or natural fibres (cotton, wool, jute, coir, etc.) are used as raw material for these yarns (Fig. 1.3(f)). When synthetic fibres are used, they are cut into shorter lengths (staples) so as to make them compatible in physical dimensions to their natural fibre counterparts. This makes synthetic fibres processable on machines that were designed primarily for natural fibres. Furthermore, it makes them suitable for blending if necessary. The fibres are held together by twist or fibre/filament wrapping. Hence, the magnitude of the twist or wraps is the most important parameter for these yarns. The yarn surface shows a helical arrangement of fibres with a lot of projecting ends.
1.3.3 Core spun yarn Core spun yarns have a distinct core and sheath fibre assembly (Fig. 1.3(g)). This can be either elastic or non-elastic. Non-elastic core A filament (mono or multi) is placed at the core of the yarn and wrapped by staple fibres. Such a combination leaves the opportunity to select appropriate fibres for the core and sheath to suit a specific application. As an example the core could be a high tenacity fibre such as polyester, nylon, polyethylene, polypropylene, etc., in filament or staple fibre form, and the sheath could be cotton, FR viscose, wool or any synthetic fibre in staple or wrapped filament form. Elastic core The core is either a rubber thread or any other elastomeric filament such as spandex, lycra, etc. The core is usually 2–10% of the total yarn mass. It is surrounded by suitable staple fibres. The yarn combines the attributes of the individual components. Stretch and recovery from stretch are the two most important attributes for these yarns.
© Woodhead Publishing Limited, 2010
8
Technical textile yarns
1.3.4 Plied/folded yarn Plied/folded yarns are assemblies of twisted single yarns (Fig. 1.4). Usually the twist imparted at the plying stage is opposite to that in the single yarn, i.e. it is S over Z. This gives an opportunity to produce a torque-balanced structure. Depending upon the number of yarns plied together, it is called 2-ply, 3-ply or multi-ply yarn. When forming plied yarn 70% of the twist present in the single yarn is employed. The resultant yarn becomes more uniform, less hairy, more stable and stronger than the equivalent single yarn.
1.3.5 Cabled yarn When several plied yarns are similarly brought together and twisted again in opposite directions, a cabled yarn is formed. Technical yarns are usually cable twisted in order to make a torque-balanced yarn with superior properties.
1.3.6 Braided yarn Braided yarns can be either tubular or solid (Fig. 1.5). Several yarns, typically 8–36, are interlaced at an angle to form the braided structure. The interlacement pattern could be plain or twill. The final thread is torquebalanced and shows no untwisting tendency when stretched. It is highly Yarn
Ply yarn
Ply yarn
1.4 Ply yarn and cord.
1.5 Braided thread.
© Woodhead Publishing Limited, 2010
Cord
Introduction: types of technical textile yarn
9
flexible and its elongation is less than that of the equivalent twisted yarns. Table 1.2 summarizes the characteristics of different yarns.
1.4
Yarn production: mono- and multifilament, tape, staple, core spun, folded and other yarns
A brief description of the production techniques of different types of yarn is presented here. Table 1.2 Characteristics of technical yarns Type
Sub-category
Structure and form
Characteristics
Filament Mono-filament Multifilament
Rod-like, solid or hollow Assembly of large number of filaments, textured or twisted
Strong and rigid, inflexible, smooth Strong but flexible
Tape Flat Fibrillated and twisted
Flat, ribbon-like having Strong, good cover, primarily length and smooth width Mesh-type structure, Strong, soft twisted ridges and round
Spun
Round, hairy, soft, twisted ridges, core– sheath
Ring, rotor, friction and wrap
Weaker than filament yarn, softer
Core spun Rigid/elastic core Spun in appearance, core filament at centre, extendable
Strong, soft feel, extension controllable by nature of core filament
Commingled Self and hybrid Entanglements, homogeneous filament distribution
Uniform distribution of filament in yarn crosssection, better impregnation by polymer matrix
Plied Spun/filament Similar to spun/ Round, more uniform and plied multifilament yarn, stronger than single yarn, round twisted spirals, higher abrasion rounder resistance, torque balanced Cabled Spun/filament Prominent twisted cabled spirals, hard Braided Hollow/core sheath
Round, more uniform and stronger than plied yarn, higher abrasion resistance, torque balanced
Obliquely interlaced Strong, smooth, flexible, yarn following a spiral torque balanced path, hollow or with filament core
© Woodhead Publishing Limited, 2010
10
Technical textile yarns
1.4.1 Mono- and multifilament yarn production Thermoplastic polymers such as nylon, polyester and polypropylene are melt spun into filaments (Fig. 1.6). The material is supplied in the form of small ‘chips’ into a silo. It is then transported to the hoppers of extruders. The chips are now conveyed forward by a screw and simultaneously heated to transform them into a molten polymer. The pressure generated by the screw along with the metering pump forces the molten polymer to pass through tiny holes of spinnerets to form thin fibrous strands. In some cases, the extruder may be directly connected to the chemical reactor which is producing the polymer. As the molten polymer emerges from the spinneret holes, it is solidified by cooling using cold air or gas. The filaments are then drawn in a cold (nylon) or a hot (polyester) state to orient the chain molecules to the required extent for imparting the desired physical and mechanical properties into the filaments. Throughout the process, the maintenance of the correct temperature, pressure, viscosity and rate of cooling within strict tolerance limits is highly critical for an acceptable quality of the product. The crosssectional shape of the fibres can be changed by changing the shape of the holes in the spinneret. If the spinneret possesses one single hole, a monofilament is produced. A multi-hole spinneret produces multifilament yarn.
1.4.2 Tape yarn production As already mentioned, tape yarn can be either flat or fibrillated (twisted or untwisted).
Molten polymer
Metering pump
Spinneret
Cold air
Drawing
Winding
1.6 Melt spinning.
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
11
Flat tape yarn In principle there are two ways to produce tape yarns [2]. ∑ ∑
Cutting of undrawn film Stretching followed by cutting.
In the first method (Fig. 1.7), an undrawn flat polymeric film is cut into narrow strips by a bar having razor blades as cutting devices arranged in parallel or by circular knives mounted on a rotating shaft. The strips can be varied in width from 1 to 20 mm or greater and in thickness from 20 to 110 mm. This operation is followed by stretching to impart the necessary dimensions and properties to the tape. The cutting width (b) of the primary film (or the distance between the blades to be adjusted) and the resultant tape linear density (T) expected are based on the following formulae:
b = w × (stretch factor)½
T = w × d × 10 × r
where w = required final tape width (mm), d = tape thickness (mm) and r = tape density (g/cm3). In the second method, the flat film is first heat-stretched monoaxially to achieve the desired properties and dimensions (thickness) and then subsequently cut in a similar fashion by a razor blade bar to the desired width. The minimum tape width and thickness achievable by this technique are 1–2 mm and 15–20 mm respectively. Cutting prior to stretching shows a reduction in tape width and thickness. Pronounced orientation and higher anisotropy of strength show a higher
Cutting blade Film
Cut film
1.7 Tape yarn production.
© Woodhead Publishing Limited, 2010
12
Technical textile yarns
fibrillation tendency compared with film tape made by stretching from narrow film ribbon cut from primary film prior to stretching. Fibrillated tape yarn Fibrillated yarns are essentially produced through a process of splitting a flat tape (2 cm in width) into fine fibrils. There are several ways to induce fibrillation, i.e. to generate a network-like structure. A flat tape is split either chemo-mechanically or by mechanical actions, i.e. brushing, rubbing, bending, twisting, air jet or ultrasonic treatments, to produce a mesh structure. The splittability of the tape can be improved either by blending two incompatible polymers or through addition of some compounds to the polymer which introduce flaws or weak places in the film. Greater molecular attraction in the form of hydrogen bonding and dipole interaction increase transverse strength and hence ability to split. Various fibrillation techniques are as follows. Uncontrolled fibrillation ∑
Twist fibrillation: This is the simplest process of fibrillation. Twisting of highly stretched film tape to over 100 turns/m on a ring twister results in fine fibrillation. The shearing force due to twisting leads to shearing action resulting in the splitting of the structure. The cross-section of the fibrillated fibre segments varies in thickness and linear density. ∑ Twist jet fibrillation: An air stream (at 10–250 psi) at high speed hits the tape at an angle, causing the tape to fibrillate. The rotating air vortex also causes the yarn to be interlaced and twisted. ∑ Fibrillation by transverse forces: The tape is abraded between two rubbercoated rotating rollers, one of them oscillating in its axial direction. The to and fro movement of the oscillating roller exerts a transverse stress, causing the tape to split. ∑ Chemo-mechanical fibrillation: A compound that decomposes at or near the extrusion temperature, a soluble salt or an incompatible polymer is added to the polymer, which introduces randomly distributed inhomogeneities in the film. These act as weak spots during the drawing process, enhancing lengthwise splitting during subsequent stretching. Controlled fibrillation To have some control over the fibrillation process, controlled mechanical fibrillation can be carried out in three different ways, i.e. by a needle roller, by embossing or by a cutting technique. In needle roller fibrillation, an array of film tapes 2 cm wide and 100 mm
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
13
thick are fed under tension to a fibrillation unit consisting of a rotating pinned roller and a rubber-coated pressure roller (Fig. 1.8). The rubber-coated pressure roller ensures proper penetration of the film by the needles of the fibrillated roller, which in turn produces a network-like structure in the tape. The characteristics of the network structure are governed by the fibrillation ratio, the diameter of the needle roller, the angle of incidence and contact between fibrillation roller and film, the film tension, the film thickness, the needle density, the arrangement of needles on the fibrillator (a straight row of pins or a sinuous wave-like arrangement), the distance between needles, the distance between needle rows, and the depth of penetration of the needles. The fibrillation ratio is defined as
Fibrillation ratio =
inlet speed of the film surfface speed of the fibrillated roller
In the embossing technique, grooves are introduced into an undrawn film along its length by a heated profiled roller during the extrusion process by a profiled die or after extrusion. During subsequent stretching, the film separates along the groove into separated filaments. By imposing a complex profile pattern into the film, a network-like structure can be produced during subsequent stretching. Slicing is performed using a fine sawtooth-like fixed cutting tool on an unstretched or stretched film. This results in the production of filaments of rectangular cross-section and uniform fineness (6–6.6 dtex). The process gives better uniformity of fineness of individual filaments. A finer filament linear density is difficult to produce by this technique.
1.4.3 Staple yarn production Staple yarns are produced from short staple fibres. A schematic of the process steps is shown in Fig. 1.9. The fibres are first opened, and cleaned if necessary, mechanically by a series of machines that can perform the task of opening
Pinned fibrillation roller
1.8 Fibrillation technique.
© Woodhead Publishing Limited, 2010
14
Technical textile yarns Opening and cleaning
Carding
Drawing
Spinning
Roving preparation
Drawing
1.9 Spinning process steps.
and cleaning simultaneously. Subsequently these are transformed into a sliver (a thick linear assembly of randomly arranged fibres) by a process called carding. The sliver is quite thick, usually 100 to 500 times thicker in terms of mass per unit length compared to the final yarn. The sliver therefore needs to be attenuated so as to make it thinner. The attenuation is carried out in steps by a process called drafting and drawing till it reaches the dimension of the desired yarn. Care is taken to ensure that the drafting process does not introduce too much irregularity (mass variation) into the product. The only operation which is to be accomplished thereafter is to impart cohesion to this thin assembly of fibres using one of the following techniques: ∑ Twisting by ring, rotor or friction spinning machine ∑ Wrapping an external filament by parafil spinning machine. The technology of inserting twist and wrapping is discussed below. Twisting by ring spinning machine The twister consists of a circular ring and a tiny C-shaped wire called a traveller which can move freely on the ring. The ring acts as a circular track for the traveller. The spindle on which the bobbin is mounted is placed within the ring. The yarn path from the front drafting rollers to the bobbin through the lappet guide and traveller is shown in Fig. 1.10. Every rotation of the spindle causes the traveller to rotate on the ring along with the loop of the yarn between the lappet guide and the traveller. Each rotation inserts one twist into the yarn. The rotational speed difference between the traveller and the bobbin or spindle causes the yarn to wind on the bobbin as well. In a dynamic situation, as the thin attenuated ribbon of fibres emerges from the front roller, it is immediately converted into yarn due to the insertion of twist and simultaneously wound on the bobbin. The insertion rate of twist can be varied from 8000 to 24,000 rev/min. With a yarn delivery rate of 15 m/min, it can introduce twist in the range of 13–41 turns per inch (5–16
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
15
Front drafting roller
Lappet guide
Yarn balloon
Ring
Traveller Bobbin
1.10 Ring spinning process.
turns per cm). The system is capable of producing yarns in the count range of 5–100 tex. Twisting by rotor and friction spinning machine In ring spinning the twisting and winding processes are inseparable. This limits the twisting rate beyond a certain limit and as a result the production speed is limited. To overcome this technological limitation rotor and friction spinning have been developed. With increased twisting rate in both systems, an increase in production rate follows. In rotor spinning, a sliver is fed to the system which is opened thoroughly by an opening roller having a large number of pins on its surface, and the separated fibres are introduced through a transport channel to the rotor. With every rotation of the rotor the fibres accumulate in the form of layers within the rotor. The take-up package rotates independently of the twisting device (Fig. 1.11). When a seed yarn from the take-up package is introduced into the rotor, it joins the accumulated fibre rings within the rotor groove and starts rotating along with the rotor. As a result the accumulated fibre ring gets twisted with every rotation of the rotor. The twisted fibre assembly is withdrawn immediately by the take-up rollers and is wound onto a bobbin. Friction spinning (Fig. 1.12) offers a unique opportunity to combine fibres arriving at the twisting point from two or three different sources. Two drafting systems (one of the roller and the other of the opening roller
© Woodhead Publishing Limited, 2010
16
Technical textile yarns 10
11
6
13 7
9 12 8
5
3
1 4
2
1. 2. 3. 4. 5.
Presser and feed plate Trash duct Opening roller Opening roller clothing Fibre feed or transfer tube (air stream) 6. rotor bearing
7. 8. 9. 10. 11. 12. 13.
Doffing tube Feed sliver Fibre collection surface Doffing tube navel Drawing-off rollers Feed roller Yarn
1.11 Rotor spinning [3]. Drafting unit
Fibres Transport duct
High draft unit
Friction drum Sliver Filament
Yarn
Opening roller
Sliver
delivery roller
Friction drums
1.12 Friction spinning.
type) are placed perpendicularly to each other in close proximity to a pair of perforated friction drums that act as a twister. The roller drafting system is aligned along the axis of the friction drum and the opening roller drafting system is placed perpendicular to it. Usually one sliver is fed through the roller drafting system and five or six slivers (2.5–5.0 ktex) through the opening roller system. The slivers are opened thoroughly by the opening rollers
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
17
and released into the transport channel. The airstream passing through the channel brings the fibres to the torque field created at the nip of the rotating friction drums. The drum moves slowly in comparison to the speed of the approaching fibres. This causes fibres to accumulate at the torque field and to be made to stick to the drum surface by internal suction acting through the perforations of the drums at the nip. The drafted fibres from roller drafting also arrive at the nip. While passing through the nip, the fibres get twisted into a yarn by the torsion moment created on them by the two rotating drums. The fibres fed through the roller drafting system get false-twisted and remain in the yarn core, and those fed by the opening rollers get wrapped over it, and as result a distinct core sheath type of structure is produced. The yarn is withdrawn by a pair of rollers and led to the take-up package. Friction spinning is suitable for spinning very coarse count yarn and is capable of handling a wide variety of fibres of length 38–100 mm and fineness 0.6–3.3 dtex. Whenever necessary a filament can also be introduced through the nip of the front rollers in conjunction with or without the drafted assembly of fibres. This will cause the filament to occupy the centre part of the yarn. Usually the filament core imparts strength. This system thus offers enormous opportunity to produce different yarn structures through selective placement of fibres in different layers around the core and becomes extremely suitable for coarse count technical yarns. Filament wrapping A drafted ribbon of fibres is made to pass through a hollow tube which holds a rotating filament package (Fig. 1.13). As the package rotates the filament is withdrawn and passed to the tip of the hollow spindle. It joins the drafted ribbon of fibres and make wraps around the twistless stream of fibres which form the core. The percentage of filament varies from 1 to 5% of the ultimate yarn. The advantage of this system over ring spinning is that with the same fibre a finer yarn can be made, and coarser fibres can be used for a given yarn count. The count range of yarns that can be produced by various technologies is as follows: Technology
Count (tex)
Ring spinning Rotor spinning Friction spinning Wrap spinning
3–600 15–295 15–590 12–590
© Woodhead Publishing Limited, 2010
18
Technical textile yarns High draft unit
Wrapping filament
Hollow spindle
Wrapped yarn
1.13 Wrap spinning.
1.4.4 Core spun yarns These yarns can be produced either on a normal ring spinning machine used in the cotton, worsted or jute industry or on rotor and friction spinning machines. Rigid yarn A strand of drafted staple fibres (called roving) is mixed with a pre-tensioned filament yarn at the nip of the front roller of the drafting unit, as shown in Fig. 1.14, and twisted together by a ring twisting device before finally winding onto a bobbin. The filament should be introduced at the centre of the drafted ribbon under a pre-tension (usually equivalent to 5% of the extension of continuous filament yarn) to ensure a true axial position of the filament so that it gets adequately covered by the staple fibres in the composite structure. When producing on a friction spinning machine, the filament yarn, under tension, is introduced by the front roller of the roller drafting unit between the nip of the twisting drums. If needed, a staple fibre assembly can also be
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn Filament
19
Roving
1.14 Core spun filament yarn.
introduced into the core in a similar fashion by the roller drafting assembly. The core fibres remain in a false-twisted state within the twisted core spun yarn. Elastic yarn An elastomeric filament is introduced in this case. The filament, fed from a spool, needs to be stretched before entering the spinning zone. This action ensures elasticity in the final yarn when the core retracts, causing compacting and bulking of the spun yarn cover. The spool of the elastomeric yarn is fed by a positively driven feed roller system (Fig. 1.15). The spool rests on it and is driven by surface contact with the positively driven feed rollers. The stretch is adjusted by the speed of the feed roller in relation to the drafting roller speed. The elastomeric filament is extended by around 200–400% before being joined to the stream of drafted ribbon of fibres. The retraction percentage could be of the order of 116%. The core percentage can be worked out as follows [4].
Final core % =
TE K ¥ 100 DTC
Where TE = linear density of elastomeric yarn, K = correcting factor to modify the retraction fo spandex between front nip and traveller (usually 1.16), D = draw/stretch ratio and TC = linear density of final core spun yarn.
© Woodhead Publishing Limited, 2010
20
Technical textile yarns Lycra spool
Positively driven feed roller
Drafted roving
1.15 Core spun Lycra yarn.
Elastic yarn can also be produced by the SIRO spinning technology. SIRO spinning is essentially a ring spinning system with an additional facility to introduce two rovings in the drafting zone instead of one. The drafted rovings before merging together at the spinning point remain separated throughout the draft field. The elastic filament is introduced at the nip of the front pair of rollers from behind. After twisting, the elastic filament remains in the core and the two drafted rovings wrapped around it ensure excellent core coverage.
1.4.5 Folded yarn production Most technical yarns are not used singly but are plied together to make them suitable for actual use. The yarns are twisted by an up- or down-twister, a two-for-one twisting machine or a combination machine. The traditional plying process consists of two operations, namely assembly winding and twisting. In assembly winding, the required number of single yarns (usually two) are wound onto an intermediate package (a flanged bobbin, cone or cheese). The bobbins are used as a feed package to the twister. Plied yarn Ring-twister/down-twister The assembled yarns are directed by a pair of rollers and guided to the twisting point consisting of ring and traveller. Rotation of the traveller causes a rotating balloon to be formed between the lappet guide and the ring. Every rotation of the traveller puts one turn into the yarn. As in ring spinning, the lag of the traveller causes the yarn to be wound on the bobbin. The ring
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
21
rail keeps moving up and down in order to wind the yarn from bottom to top of the bobbin surface. The twist (T) inserted can be estimated from the following equation:
T =
ns n – 1 @ s v pdb v
where ns = spindle speed, v = delivery rate, and db = bobbin diameter at the point of winding. Usually Z-twisted single yarns are twisted in the S direction to form a snarl-free structure as the twists in single and double yarn balance each other. The yarn also becomes more uniform and round. Ring twisting is a downtwisting process. A twist ratio (folded/single) of 2/3 produces a balanced structure. High twist tyre cords are preferred to be twisted by ring twister. Up-twister In up-twisting (Fig. 1.16(a)) the supply package of suitable size is first formed and fixed on a spindle. As the spindle rotates at a constant speed a balloon gets formed and generates one turn in the yarn per revolution. The yarn is withdrawn at a constant rate and wound on a take-up package. The yarn passes through a flyer that rotates at a speed that is decided by the rate of yarn withdrawal and the bobbin diameter. The twist (T) inserted can be estimated from the following equation:
Delivery package
C
A Feed package Feed package
Spindle
B Spindle
(a)
(b)
1.16 (a) Up-twister; (b) two-for-one twister.
© Woodhead Publishing Limited, 2010
22
Technical textile yarns
T =
ns n + 1 @ s pdb v v
where ns = spindle speed, v = delivery rate, and db = bobbin diameter at the point of winding. The additional twist (1/πdb) is inevitable due to each turn around the bobbin and depends upon the bobbin diameter. This additional twist can be 10% of the total twist in the case of low twisted yarn (50–100 turns per metre). In both the up- and down-twister, either the feed or the delivery package needs to be rotated in order to insert twist at the intended speed. To minimize power consumption the rotating package needs to be smaller and slenderer. A consequent high power consumption puts a limit to the twisting rate. Besides, in both cases, a large yarn package is broken down into smaller ones. This necessitates further rewinding at a later stage to produce suitably sized packages. Two-for-one twister In the two-for-one twister, two twists get inserted in one revolution of the spindle. The feed package could be a conical, random or precision cross-wound assembly package. One or two packages (one above the other) is inserted on the spindle. The yarn enters axially into a central bore of the throw-off plate. The stationary feed package support is concentrically located. The yarn path from the supply package to the take-up package is chosen so that the yarn folds back on itself in the form of a loop (Fig. 1.16(b)). If the loop is now rotated, every rotation of the loop will insert one turn in the same direction in portions AB and BC successively. As a result, with the withdrawal of the yarn as the portion AB comes to the portion BC, these turns are added together to generate two turns per unit length in the final yarn. Cable yarns The production of cabled yarn is similar to that of plied yarn, but instead of twisting two individual yarns, two plied yarns are twisted together in opposite directions by another similar machine at the next stage. The cabled yarn can have an S-S-Z or S-Z-S, or a Z-S-Z or Z-Z-S twist combination at single, plied and cabled stage. These yarns are more uniform and stronger.
1.4.6 Intermingled/commingled yarn Intermingling of filaments is a substitute for twisting operations in which low twist is required to hold the filaments together [5]. The process is cheaper. Figure 1.17 shows a schematic of the intermingling/commingling process. In
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
23
Air entry
Filament entry
1.17 Intermingling jet. Braid haul-off Braiding point
Anticlockwise
Carriers with spools
Clockwise
Serpentine tracks for carriers
Gear train below carrier for propulsion
1.18 Braiding process [6].
the commingling process, rapidly moving air in an air jet is used to generate entanglements among the filaments. Mingling of two or more yarns to form a single strand of yarn is defined as commingling. Commingled yarn consists of a blended combination of reinforcing filament yarn and filament yarn spun from thermoplastic polymers. The filaments remain scattered amongst one another at filament level in the final yarn. In the commingling process any weavable reinforcing fibre and most spinnable polymer fibres can be combined. Commingled yarn shows good processability by almost all known textile manufacturing technologies.
1.4.7 Braided yarn Many technical yarns are also produced by a process called braiding. In braiding several yarns interlace each other at an angle to form a braid. Bobbins containing the yarns are placed on the carriers (Fig. 1.18) which are moved
© Woodhead Publishing Limited, 2010
24
Technical textile yarns
by rotating horn gears. As the gear rotates the bobbins move from one gear to the other and thus describe a serpentine path around a common axis. Half the carriers rotate in the clockwise direction and half in the anticlockwise direction. The interlaced structure is simultaneously withdrawn. The result is a structure of interlaced yarns following a spiral path. The interlacement can be of various types such as plain, twill, hopsack, etc. Depending upon the number of carriers and the braiding tension, a hollow circular braid or a ribbon braid or a tightly packed structure can be produced. If required, some other yarns can be introduced into the core to produce a core–sheath type of structure. High tenacity polyester may remain in the core, surrounded by a normal polyester, nylon, polypropylene, viscose or cotton braided sheath. A variety of yarns can be produced by having different ratios of core and sheath to suit different requirements.
1.4.8 Specialized yarns Conducting yarn Conducting yarns need conducting fibres. There are four methods to produce conducting yarn: ∑
Production of electrically conductive fibres by wet or melt spinning (conductive polymer polyaniline) ∑ Metallic fibre made from fine gauge copper, silver or nickel ∑ Coating or dyeing fibres with electrically conductive materials (metal powder, carbon black) ∑ Traditional core spinning technology using conductive fibre in the core covered by non-conducting sheath fibres. Such yarns are used in carpets, aircraft blankets, dry filtration, safety workwear, and upholstery. Melt and wet spinning ∑
Melt spinning: Conductive filler such as carbon black is incorporated into nylon or polyester polymer and extruded together through the spinneret to form the conducting fibre/yarn. Carbon content is limited to 40% as the mechanical properties of the polymer are adversely affected by a carbon content greater than 40% by weight. Conducting fibres are also produced by incorporating carbon nanofibres (CNF) or carbon nanotubes (CNT) into the polymer matrix and spinning them together. The nanotubes are dispersed in melt or liquid. ∑ Wet spinning: Xue et al. [7] suggested a wet spinning method as described below. An aqueous solution of PVA (polyvinyl alcohol) and purified
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
25
CNT was prepared. The weight ratio of CNT was of the order of 40% for obtaining high conductivity. Stirring of the solution was continued at 60°C till uniformity and the required viscosity were obtained. A syringe pump immersed in a coagulating bath containing 17% sodium sulfate (Na2 SO4) extruded the PVA/CNT. The solution precipitated as gel and was guided towards a take-up roller. The important parameters that affected performance were the viscosity of the solution, the composition, concentration and temperature of the coagulating bath, and drawing during spinning. Coating/dyeing Incorporating metals in the yarns makes the yarn heavy, hence to overcome this problem metallic coating has been introduced. A yarn (natural or synthetic) is coated by a conducting metallic powder such as silver, copper or nickel. The substrate could be polyester, nylon filament yarn or cotton and wool yarn. According to Shaikhzadeh Najar et al. [8] the coating can be accomplished by three different methods: solution, vapour and mist polymerization techniques. These coated yarns have low conductivity. As an example a thin layer of copper sulfide is grafted on the surface of the fibre, making it a conductive fibre as well as imparting antibacterial properties. Xue et al. [7] passed cotton, silk, wool/nylon, polyester and polypropylene yarns through a solution of PVA/CNT, removed the excess material and dried it at ambient temperature overnight to get the yarns coated. Polyester multifilament yarns can be dyed directly by passing them through a dye bath containing the CNT-based dyestuffs [9]. The temperature is maintained at 40°C. A microwave vibration keeps the filament vibrating in order to dye the filaments thoroughly. The yarns are subsequently cured in an oven at 170°C for about 30 s. Spun yarn technology Polyester fibre embedded with carbon particles can be blended at 1% with normal polyester fibre to produce conductive yarn which can prevent discomfort from static in everyday clothing and carpets. A mixture of 2–5% is required for safety workwear and for industrial filters. Resistivity could be of the order of 1–100 MW/m2. Core spinning technology Using conductive material, e.g. stainless steel fibre (8 mm thick and 50 mm long) or wire (50 mm/140 den) in the core and polyester, FR viscose or cotton in the sheath, a core–sheath type conducting yarn can be produced
© Woodhead Publishing Limited, 2010
26
Technical textile yarns
using friction spinning technology [10]. Various yarn constructions are possible with a core having conducting material in filament form and a sheath consisting of a mixture of conducting and non-conducting fibres in different sheath layers. In such constructions the outermost sheath layer is made of non-conducting fibres. The core/sheath ratio could be in the order of 30:70. Out of 70% sheath, 10–30% could be made of conducting staple fibres. The placement of conducting sheath fibres can be manipulated by adjusting the location of the slivers in the drafting unit.
1.5
Characterization of yarn: dimensional parameters, packing of fibres and twist
Technical yarns, like other yarns, can be characterized by their dimensional, structural and constituent fibre parameters. If special chemical treatments are applied to the yarn for specific purposes, this also needs to be mentioned. The various parameters required to characterize a yarn are suggested in Table 1.3.
1.5.1 Dimensional parameters Linear density/count Linear density or yarn count, yarn number and yarn size are indirect expressions of fineness of yarn. The fineness is not expressed by the yarn diameter because, firstly, the diameter is not stable and uniform along the yarn length in the case of spun yarn, and secondly, the cross-sectional shape may not be circular for both yarn and fibre. Hence it is indirectly expressed by either measuring the weight of a known length of yarn or measuring the length Table 1.3 Technical yarn characterization Parameters
Characteristics
Dimensional parameters
Linear density Diameter
Structural parameters
Twist and its direction Wrap density and its direction Number of plies, ply twist, and twist combination Core content, core–sheath ratio Blend constituents and blend ratio Packing coefficient
Constituent fibre parameters Number of filaments in cross-section Filament cross-sectional shape Length Linear density Crimp cross-sectional shape
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
27
of a known weight of yarn. These two basic methods to express the linear density of any textile strand are known as the direct and indirect systems of expression. Therefore, by definition, the two systems of expression are:
Direct system = weight/unit length
Indirect system = length/unit weight
Generally the unit of weight is small and length is large so that reasonable figures are obtained in both systems to indicate fineness or linear density. In the direct system, the larger the indicated number of fineness, the coarser will be the yarn. In the indirect system it is just the opposite. Table 1.4 gives a comprehensive account of the units used in the expression of linear density. According to linear density, technical yarns can be divided into three categories: heavy industrial yarn (830–5500 dtex), light industrial yarn (50–550 dtex) and textile yarn (20–50 dtex). Linear density of plied yarn ∑
Direct system: In this system, the resultant linear density of plied yarn is the simple summation of the linear densities of the individual components, neglecting both yarn contraction and extension:
Resultant linear density, R = T1 + T2 + T3 + . . . + TN
where T1, T2, T3, . . . TN are the linear densities of the N individual components expressed in tex, den or jute. ∑ Indirect system: In the indirect system the relationship is
1 = 1 + 1 +...+ 1 R C1 C2 CK
where C1, C2 . . . CK are the linear densities of the K individual components expressed in any indirect system. It very often becomes necessary to convert linear density expressed in one system to another. The conversion factors are given in Table 1.5.
Table 1.4 Units of linear density System Direct Tex Denier Jute Indirect English Metric
Weight unit
Length unit
System unit
Gram (g) Gram (g) Pound (lb)
1000 metre (m) 9000 metre (m) 14,400 yard (yd)
g/1000 m g/9000 m
Pound (lb) Kilogram
Hank = 840 yard (yd) Hank = Kilometre (km)
Number of hanks/lb Number of hanks/kg
© Woodhead Publishing Limited, 2010
28
Technical textile yarns
Table 1.5 Unit conversion
Direct system
Indirect system
From
To tex
To denier
To jute
To English (Ne) To metric (Nm)
Tex (Nt) Denier (Nd) Jute (Nj) English (Ne) Metric (Nm)
1 0.11 Nd 34.45 Nj 590.5/Ne 1000/Nm
9.0 Nt 1 310 Nj 5315/Ne 9000/Nm
0.029 Nt 0.0032 Nd 1 17.14/Ne 29.02/Nm
590.5/Nt 5315/Nd 17.14/Nj 1 0.5905/Nm
1000/Nt 9000/Nd 29.02/Nj 1.693/Ne 1
Table 1.6 Specific volume of yarn Yarn
Specific volume (cm3/g)
Density (g/cm3)
Spun yarn Cotton 1.1 Nylon 1.45 Polyester 1.30
0.91 0.69 0.77
Filament yarn Nylon 1.35 Polyester 1.16
0.74 0.86
Yarn diameter It is at times necessary to know the approximate diameter of a yarn even though it is well known that yarn diameter cannot be estimated accurately owing to the highly compressible nature of the material. Diameter, however, gives an idea about the extent of cover achievable or the closeness of yarn packing in a fabric. Fabric thickness is also dependent on yarn diameter. The relationship between yarn diameter (dy) and linear density (C) can be worked out from the known experimentally determined values of specific volume (Vy). Such a relationship has been worked out by Hearle et al. [11]. The relationship between yarn diameter and yarn count (tex) is
dy = 2
Vy C C cm = 2 cm p ¥ 10 5 p ¥ 10 5 frf
where Vy = yarn specific volume, f = packing coefficient (see Section 1.5.2) and rf = fibre density (g/cm3). Therefore if the count and packing coefficient are known one can estimate yarn diameter. The value of the specific volume of yarn has been found to be mainly a function of twist, though fineness, crimp, flexural rigidity and length (for staple fibres) do have some influence. Some typical values of specific volume are shown in Table 1.6.
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
29
Number of fibres/filaments in cross-section The number of filaments in a yarn is generally specified in the case of filament yarn. It can also be found by taking the ratio of yarn to filament linear density, i.e. N = 9C/nf where N = number of filaments/fibres, nt = yarn linear density (tex), and nf = fibre linear density (den). A filament yarn designated as 130/24 is of 130 denier fineness with 24 fibres or filaments in the cross-section.
1.5.2 Packing of fibres Since yarns are assemblies of fibres, it becomes important to know how the fibres are packed. Whenever a yarn encounters bending, twisting or tensile deformation, fibres are subjected to forces that cause them to move relative to each other. The ease of movement of fibres within a yarn depends upon how the fibres are packed within the yarn. While in some products a low packing density may be desirable, in others a highly packed structure is beneficial. The packing of fibres is objectively defined by the packing coefficient (f). This may be expressed in any of the following three ways. ∑
The ratio of the volume of the constituent filaments to the volume of yarn:
∑
f=
ry Vf or rf Vy
where Vf = fibre specific volume, Vy = yarn specific volume, rf = fibre density and ry = yarn density. The ratio of the total area of the constituent fibres to the area of the constituent fibres plus the area of voids within:
f=
nprf2 nprf2 + nV A
where n = number of fibres, nV = number of voids, A = area of void and rf = radius of fibre. ∑ The ratio of the sum of the area of the constituent fibres to the area of the yarn calculated from the average diameter of the yarn:
f=
npdf2 / 4 ndf2 Êd ˆ = 2 = nÁ f ˜ Ë dy ¯ pdy2 / 4 dy
2
where df = fibre diameter and dy = yarn diameter.
The fibres in a yarn, or the yarns or strands in a cord or rope, can be packed in two different ways, known as open and close packing (Fig 1.19).
© Woodhead Publishing Limited, 2010
30
Technical textile yarns
Open packing
Close packing
1.19 Open and close packing.
In open packing the fibres are arranged in successive concentric circles, while in close packing the fibres fit into a hexagonal pattern. The diameter of such an assembly of fibres can be described by the following equations [12]: Open packing Close packing Yarn diameter circumscribing the nth layer Number of fibres in the nth layer
(2n – 1)df ~2π(n – 1)
2(n – 1)df 6(n – 1)
For a close packed structure, the total number of fibres, S, in the crosssection is given by
S = 1 + (n – 1)/2[2 ¥ 6 + (n – 2) 6] = 1 – 3n + 3n2
For cord the same formulae will be applicable, except that the fibre radius should be replaced by the yarn/strand radius. Scardino [13] has suggested typical packing coefficients for a few yarns as shown in Table 1.7.
1.5.3 Twist Twist is defined as the number of turns present in a unit length of yarn. Twisting has the following purposes: ∑
To improve coherence between the fibres, though not really to improve the strength in filament yarn ∑ To improve both coherence and strength in staple fibre yarn ∑ To improve abrasion resistance and fatigue ∑ To enhance flexural rigidity ∑ To make the yarn compact ∑ To reduce snagging.
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
31
Table 1.7 Packing coefficient of different yarns [13] Type of yarn
Packing coefficient (f)
Monofilament Tape Multifilament: Untwisted Regularly twisted Hard twisted Staple yarn Soft twisted: Hard twisted Ring Rotor Friction Wrap
1.00 1.00
S
0.25 0.60 0.90 0.33 0.60 0.50–0.60 0.35–0.55 0.30–0.55 0.40–0.70
Z
S twist
Z twist
1.20 Twist direction.
The twisting action causes the filaments to follow a helical path around the yarn axis. Twist is the most important structural parameter in a twisted yarn. In the case of multifilament yarns the twist is introduced primarily to bind the filaments together so that it facilitates processing by showing no fraying tendency. Besides processability and strength, twist also influences many other properties of yarn such as abrasion resistance, bending rigidity, fatigue resistance, etc. The twist level that maximizes one of the properties may not be right to maximize or minimize another. Hence, depending upon the end use, the optimum twist level has to be selected. The two most important aspects of twist is its direction and its level, i.e. intensity. If the surface helices are inclined from right to left it is known as Z twist (Fig. 1.20). The reverse is true for S twist. Usually twists in spun yarns are in the Z direction. In the single yarn stage, the twist direction does not influence the property of the yarn. Twist is usually expressed as twists per metre or twists per inch.
© Woodhead Publishing Limited, 2010
32
Technical textile yarns
In a plied structure, the ply twist direction is generally kept opposite to the single yarn twist direction. Twisting can give a balanced (torque-free) structure when an optimum level of ply twist is chosen with respect to the single twist. However, if the end use demands, ply twist in the same direction as the single twist can also be introduced. A plied yarn is usually designated by a number such as 30/4, meaning that four 30 single yarns have been plied together to form a single twisted structure.
1.6
Structure of twisted yarn
1.6.1 Geometrical relations Hearle et al. [11] derived the equations shown in Table 1.8 to describe the relationship between different geometrical parameters of a twisted yarn. However, these equations have been derived based on the following assumptions: ∑ Circular cross-section (Fig. 1.21) ∑ The fibres remain in a series of concentric cylinders of differing radii ∑ Each fibre follows a uniform helical path around one concentric cylinder ∑ The helix angle of the fibre path gradually increases from the centre to the outside as the twist/unit length is constant ∑ Constant density in fibre packing ∑ Large number of filaments in the yarn cross-section. Table 1.8 Equations showing relationship between parameters Equations
Parameters
Cylindrical coordinates h = 1/T l 2 = h2 + 4p2 r 2 L2 = h2 + 4p2 R2 tan q = 2p r/h tan a = 2p R/h = 2p RT
R = yarn radius r = radius of cylinder containing helical path of a particular fibre T = yarn twist (tpcm) h = length of one turn of twist (cm) a = surface angle of twist q = corresponding helical angle at radius r l = length of fibre in one turn of twist at radius r (cm) L = length of fibre in one turn of twist at radius R (cm)
Polar coordinates r = constant z = length along yarn axis z = hf/2p q = length of fibre along helical path q = z sec q = z [1+(r/R)2 + tan2 a]1/2 f = angular rotation of helix tan a = tan q (R/r) tpcm = turns/twists per cm
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
33
r q
l h
l
h
q
q
z f 2pr
r
(b)
L
O
a
h a
L
(d) h
R (a)
2pR (c)
1.21 Idealized helical yarn geometry: (a) cylindrical model with (b) and (c) opened-up yarn at radius r and at yarn surface; (d) polar coordinates.
The various geometrical relations between the parameters of the yarns are shown in Table 1.6. The relation between the twist (T) and the helix angle (a) of a filament on the yarn surface is:
tan a = 2pRT = 0.0112 Vy CT = 0.0112 Vy t
where
t = CT = twist factor
For a given specific volume of yarn, the twist factor is proportional to tan a. Therefore the twist factor in a way represents the helix angle. Madsen et al. [14] reported that the average inclination angle (qmean) of the fibres in a twisted yarn is independent of the yarn diameter and depends only on the twist angle on the yarn surface. The expression for the mean twisted angle of fibres is:
q mean = a +
a – 1 tan 2 a tan a
However, for a twist angle less than 40°, the simple relationship has been shown to be
qmean = 0.695a
© Woodhead Publishing Limited, 2010
34
Technical textile yarns
Fibre torsion and bending within yarn The individual filament in a twisted yarn undergoes both torsion and bending deformation. According to Hearle et al. [15], the geometric torsion (tortuosity: t) and bending curvature (s) of a filament following a helical path with inclination angle q are given by
t = sin 2q = sin 2q 2r tanq /pT
where tan q = 2prT and hence
2 t = 2pT cos q
s=
2p sinq cosq sin 2 q or s = h r
where h = length of one turn of helix. As a result of twisting, the central fibre receives maximum torsion but experiences minimum bending, whereas the outermost fibre receives minimum torsion but experiences maximum bending. Yarn contraction/extension due to twisting/untwisting As a multifilament yarn is twisted it contracts in length. On the contrary if a twisted yarn is untwisted it increases in length. The ratio of the helical length (l) to the axial length (h) in one turn of twist is
l/h = sec q
The contraction factor (Cy), defined as the ratio of the untwisted to twisted yarn lengths or as the ratio of twisted and untwisted yarn count (direct system), is related to the surface helix angle by the following formula:
Cy = 1 seca 2
The retraction factor (Ry), defined as the fractional change in length with respect to the untwisted yarn length, is:
Êaˆ Ry = tan 2 Á ˜ Ë 2¯
1.6.2 Yarn stress–strain relation Hearle [16] derived the following formulae to relate fibre strain to yarn strain based on the assumption of idealized twisted yarn geometry:
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
For small strain: ef = ey cos2 q
For large strain: (1 + ef)2 = (1 + ey)2cos2 q + (1 – syey)2sin2 q
35
where ef = fibre strain, ey = yarn strain, sy = Poisson’s ratio and q = helix angle of the fibre at a given location in the yarn. The modulus of the twisted yarn and constituent fibre are related:
Ey/Ef = cos2 a
where Ey = yarn modulus, Ef = fibre modulus and a = helix angle of fibre on the yarn surface. All the geometrical parameters are in the unstrained state. The specific tension (fy) that a yarn will experience at any yarn extension ey can be given by: R
Ú(2prdr /V ) f (∂e /∂e ) y
fy =
0
f
f
y
R
Ú 2prdr /V
y
0
Considering Vy to be constant, l
Ú
(
)
fy = 2 ff ∂ef /∂ey t dt
0
where t = r/R, (R = yarn radius), ff = f (ef) and tanq = t tana. This equation can be solved to determine the yarn specific tension by knowing the equation of non-linear fibre stress–strain curve and other yarn geometrical parameters such as yarn radius, specific volume, twist angle, etc. For spun yarns Hearle suggests the following expression:
yarn strength yarn modulus = = cos2 a (1 – Kcosec a ) Fibre strength fibre modulus
where K is a factor that decreases with increase in fibre length, fineness and friction and with increasing migration.
1.6.3 Geometry of plied yarn Twist introduced in the plying process This model has been described by Treloar [17]. In plied yarn, the individual yarn axis is a twisted curve. The rate of rotation of the axis is known as the
© Woodhead Publishing Limited, 2010
36
Technical textile yarns
tortuosity of the curve. It is convenient to define the position of a filament in the yarn by the angle f (measured with respect to the principal plane of curvature of the strand axis at the point considered). The torsion with respect to the plane of curvature, t0, is:
t0 =
df dl
As the yarn axis is itself a helix having radius a and angle a, the tortuosity (1/S) is:
1 = sin2a = 1 sina cosa 2a S a
or
2pn cos 2 a
Therefore the total individual yarn torsion is given by
t = t 0 + 1/S =
df 1 l + sina cosa = 2 pn1 1 + 1 sina cosa dl a l a
where n1 = twist in individual yarn, l1 = length of individual yarn axis before plying, l = the corresponding length after plying, and a = helix radius of the yarn axis around the ply axis. The final torsion in the single yarn is obtained by adding the tortuosity of the ply axis to the initial yarn torsion taking into account the change in length of the individual yarn axis. The relation between the ply twist (N) and the ply helix angle (a) is:
tan a = 2paN
Usually the ply twist is opposite to the single yarn twist. The ply retraction initially reduces, attains a minimum and then increases again with increase in ply twist. This is due to the lengthening of individual yarns as they receive opposite twist at the beginning. The location of the minimum shifts to a higher ply twist level as the twist in the individual yarn increases. The retraction values increase as the yarns gets more and more inclined with increase in ply twist. Filament angle It is important to keep the filament angle parallel to the ply axis in any structure as it will protect the filaments from abrasion damage when the yarn moves longitudinally. For a two-ply yarn made from yarns of the same diameter (b) , the inclination angle (b0) for the outside filament with respect to the cord axis has been shown to be given by
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
37
l 2 tana + bt 1ÊÁ 1 ˆ˜ Ël¯ tanb 0 = l 1 – bt 1ÊÁ 1 ˆ˜ tan a Ël¯
The filament angle (f0) measured with respect to the ply axis is
f0 = b0 – a
In order to make the outside filament parallel to the ply axis for a two-ply yarn, the relationship between single yarn and ply twist has been shown to be:
n1/N ≈ – 2
To keep the filament parallel with respect to the ply axis, the ply twist should be half of and opposite to the single yarn twist in the case of twoply yarn.
1.7
Properties and performance of technical yarns
Performance and properties are highly related. The product properties depend upon the properties of the raw material and the structural characteristics of the product. As an example, for fabric, the properties of its constituent yarns and the way the yarns have been assembled into the fabric are important. In order to understand the performance behaviour of technical textiles it is imperative to know the properties of the technical yarns. Since fibre is the basic raw material for technical yarns, the properties and performance of the yarn are highly influenced by the fibre characteristics and yarn structure. The fibre characteristics that affect performance are its dimensional, mechanical, chemical, electrical, thermal and absorptive characteristics.
1.7.1 Role of fibre parameters Fibre diameter Fibre diameter, density and fineness are related to each other. The linear density (i.e. fineness) of fibres used in technical textiles ranges from 2 to 7 denier. For microfibres it could be in the range of 0.1–0.3 denier. Monofilament could be of 15 denier. Assuming a cylindrical cross-section, it can be shown that
Filament diameter (df) = 11.89 ¥ 10 –4
w cm rf
where w = fibre linear density (denier) and rf = fibre density (g/cm3).
© Woodhead Publishing Limited, 2010
38
Technical textile yarns
Filament diameter therefore increases with fibre denier and decreases with density of the fibre. Yarns made from finer fibres will be compact and will hold less air between the fibre interstices. Finer fibres are flexible and as a result the yarn and corresponding fabric can be expected to be flexible too. Finer fibres produce finer capillaries, which would make wicking faster due to higher capillary pressure. Hence in sportswear sweat removal from skin is expected to be faster with finer fibres. A compact fabric made from microfibre can make the fabric waterproof, as water droplets cannot penetrate so easily through it. For a given yarn diameter, the yarn will be lighter if it is produced from a fibre of lower density. Similarly for a given yarn count the yarn will be bulkier if it is produced from a low-density fibre. Fibres having density less than 1.0 float on water. Hence for products that need to float on water polypropylene and polyethylene fibres need to be used. Fibre specific surface area The specific surface area of fibre, defined as the surface area per unit volume, affects heat and moisture transport and the twist requirement in spun yarn. The specific surface area is given by:
ˆ Ê r Spa = 2p2l = 2 = 2 Á 5.95 ¥ 10 –4 w ˜ = 3361.3 f cm 2 /cm 3 rf ¯ w Ë pr l r
where r = fibre radius (cm). The finer the fibre the greater will be the specific surface area. With an increase in density the specific surface area also increases, provided the fineness remains the same. More specific surface area means more possible area of contact between fibres and hence better cohesion and grip between fibres. Fibre bending rigidity The flexural rigidity (B) of a fibre or filament is dependent on a few fibre parameters as suggested by the following equation [18]:
2 B = SET ¥ 10 –3 4pr
where
2 S (shape factor) = 4 pk A
and E = tensile modulus (N/tex), T = linear density of filament (tex), r = filament density (g/cm3), k = radius of gyration and A = area of cross-section. © Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
39
Hence, as the filament is made finer, it becomes more flexible and so would the yarn and fabric made out of it. The shape factor changes as the fibre becomes more and more non-circular. The fabric flexibility can be varied by the fibre/filament linear density. For stiff fabric monofilaments are used instead of multifilaments. The creasing tendency of the fabric increases as the fibre becomes finer. However, fabric abrasion resistance and resilience increase with coarser fibres. This is all due to the increased bending stiffness and strength of coarser fibres. Torsional rigidity Torsional resistance of fibres also increases rapidly with increase in linear density and shear modulus. Therefore a coarser fibre is more difficult to twist and once twisted stores a higher level of torsional strain energy than do finer fibres. This may manifest itself in a yarn in the form of snarls or kinks observed in twisted yarns. To suppress it, twist setting is practised in the industry. Torsional strain energy is released by steam setting, i.e. by exposing the yarn in a heated steam chamber. The following equation shows the torque required to produce T turns in unit length [19]:
torque =
ehC 2 T r
where e = shape factor, h = specific shear modulus, C = linear density, r = density and T = twist. With increase in fibre linear density, the torque requirement increases disproportionately. Fibre length Fibre length matters in the case of spun yarn. Use of long fibres in spun yarn reduces hairiness owing to the smaller number of terminating ends in a given section of yarn. Long fibres need less twist for optimum strength and yarns made from such fibres become soft. In filament yarns all filaments are of infinite length.
1.7.2 Technical fibre characteristics Mechanical properties Some fibre characteristics that have an important bearing on yarn properties are shown in Table 1.9. Natural fibres are in general weaker than synthetic fibres. Usually high modulus and high tenacity fibres are used in those areas where products made from these yarns are to carry loads or high impact forces.
© Woodhead Publishing Limited, 2010
40
© Woodhead Publishing Limited, 2010
Fibre Density Fineness Diameter Melting point Tenacity Initial modulus (den) (mm) (°C) (N/tex) (N/tex) (g/cm3)
Breaking extension (%)
Manila (Abaca) 1.38 Sisal 1.38 23–406 0.1–0.46 mm Coir – 0.1–0.45 mm Flax 1.7–18 0.04–0.62 mm Hemp 3–20 0.16 mm Jute 1.5 13–27 0.03–0.14 mm Cotton 1.54 12–18
2.6 1.9 16.0 2–3 1–6 1–2 4–8
Nylon Polyester Polypropylene Polyethylene Aramid HMPE E glass Carbon
Chars at 150 – – – – – –
530 440 20 1.8 43 540 18–20 470 18–22 310 17.2 33 5
1.14 6–20 7–15 258 840 1.38 7–30 250–266 820 0.91 160–175 620 0.95 20 125–140 530 1.44 1.6 10–12 500, decomposes 200 0.97 1.6 14.5 150 3500 2.60 1.6 9 1500–2500 1.78 – – 2000–6000
7 11 7 4 60 100 29 180–450
15–28 12–15 18–22 20–24 1.5–3.6 2.7–3.5 4.8 0.7–2.0
Technical textile yarns
Table 1.9 Fibre properties
Introduction: types of technical textile yarn
41
A strong fibre will result in a strong yarn and in turn a strong tear-resistant fabric. The elongation of fibres is also extremely important, because together with tenacity it determines the shock-absorbing capacity of the product. Elastic elongation (the part of the extension that is recoverable) matters most in specialized products such as sportswear, elastic bands and technical products (ropes for mountaineering, bungee jumping, shock-absorbing nets, etc.). Recovery from elongation ensures dimensional stability after repeated use. High initial modulus indicates resistance to initial deformation and also, flexural rigidity of the yarn. Depending upon the level of performance required in a product, one has to choose the fibre or fibre combination and its proportion for a given product. Carbon fibre and glass fibre do not creep, and aramid fibres show little creep but creep is a serious problem for polyethylene and polypropylene fibres. Absorption property Natural fibres absorb a lot of moisture and as a result their properties can change significantly (Table 1.10). Yarns made from polypropylene, polyethylene and HMPE do not absorb any moisture, whereas those made from nylon and aramid will absorb moisture. The absorbance of moisture can lead to loss in strength in the case of nylon and wool, whereas for cotton and jute, strength increases. It can lead to an increase in fibre diameter and consequently of yarn diameter. This may lead to an increase in the hardness of natural fibre rope. The increase in yarn diameter may lead to a change in the permeability characteristics of the corresponding fabrics. Thermal behaviour Fibres react to heat in different ways. They may shrink, change colour, soften, become sticky, melt, decompose or carbonize. Fibres such as cotton Table 1.10 Moisture regain and relative strength [2] Fibre Moisture regain at Relative strength Diameter swelling 65% RH with respect to dry (%) strength (%) Polyester Polyamide (nylon) Polypropylene Polyethylene Aramid HMPE Cotton Wool Jute
0.5 100 4–5 85–95 0 100 0 105 1–7 95 0 100 7–8 100–110 14–15 70–90 13.8
© Woodhead Publishing Limited, 2010
1.9–2.6 [16] 0 0
20 [16] 14.8 20
42
Technical textile yarns
have no melting point and char at very high temperatures (Table 1.11). Nylon and polyester, being melt spun, have fixed melting points. About 20–30°C below the melting point there is range of temperature in which they become soft and sticky and hence it is advisable not to come close to these temperatures. Below the softening region lies a broad zone where heat setting is possible. Heating and cooling in a given form results in the existing form being retained as the normal form to which the fibre tends to return when deformed. Cellulose fibre burns easily and quickly, leaving some ash. Acrylic fibres cannot be ignited so easily, but once ignited burn very fast. Polyester and polyamide are difficult to ignite; however, the fibre melts and drips. Only wool has the most favourable burning characteristics. It is difficult to ignite and after burning it leaves brittle ashes that quickly cool and do not adhere to human skin. Aramid and nomex are highly heat-resistant fibres and are therefore used for making yarns for firefighters’ protective clothing. Thermal conductivity Warmness and coolness are associated with thermal conductivity of the fabric which in turn is decided mainly by the bulk of the fibrous assembly, the thermal conductivity of the fibres and the surface roughness of the fibres or yarns or fabrics. The thermal conductivity of some fibres is given in Table 1.11 [20]. Polypropylene fibre has the lowest thermal conductivity whereas cotton has the highest. A fabric will show low thermal conductivity if it has high bulk, since the pores in it can hold a lot of air between the fibres, and air has a very low thermal conductivity (0.026 W m–2 K–1). The melting point limits the use of a fibre in a given environment.
Table 1.11 Thermal conductivity of different fibres Material
Melting point/degradation [3] (°C)
Thermal conductivity [19] (W m–2 K–1)
Air Cotton Wool Polypropylene Polyester Polyacrylonitrile Polyamide Aramid Nomex UHM polyethylene
– 150 (degrades) 132 (degrades) 165 260 150 (degrades) 215 (Nylon 6) 260 (Nylon 6.6) 427–482 430 144
0.026 0.461 0.193 0.117 0.141 0.200 0.243 0.130 – –
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
43
Chemical and UV resistance While selecting fibre for a specific yarn, one should know in advance the response of the fibre to various environmental situations. A qualitative understanding can be of great help in choosing the fibre for a given application. Table 1.12 shows the resistance of fibres to various environments. HMPE fibre is found to be best suited for all environments. The final selection has to be based on the optimum combination of properties including mechanical, thermal and electrical properties.
1.8
Properties of yarns: mono- and multifilament, tape, spun, wrap spun, core spun and plied/ cord yarns
1.8.1 Monofilament yarn Monofilament yarns are stiffer than the equivalent multifilament yarns. Being stiffer gives rigidity to the structure. Having a lower surface to volume ratio, they pick up fewer contaminants than multifilament yarns. This makes the filter fabrics readily cleanable after use. Monofilament yarns offer greater transparency as light can easily pass through them. Monofilaments can have a variety of cross-sectional shapes such as circular, square, flat, rectangular, oval, hollow, etc. The cross-sectional shape affects lustre, covering power and hand. Circular monofilaments have a minimum surface area for a given linear density. Monofilament has greater resistance to in-plane abrasive wear. However, if the wear involves repeated bending, it may wear faster than multifilament yarn. Monofilaments also offer better surface release than multifilaments. Finish Monofilaments can be given suitable finishes such as flame retardant, antioxidants, pigments and thermal and UV stabilizers to enhance filament Table 1.12 Resistance of fibres to various environments Fibre
Resistance Abrasion resistance to UV Surface Internal
Acid resistance
Alkali resistance
Cotton Nylon Polyester Polyethylene HMPE Aramid Polypropylene
Good Good Excellent Fair Excellent Fair Fair
Poor Poor Good Excellent Excellent Poor Excellent
Very good Excellent Poor Excellent Excellent Very good Excellent
Poor Good Very good Fair Excellent Fair Good
Good Very good Excellent Good Excellent Good Good
© Woodhead Publishing Limited, 2010
44
Technical textile yarns
properties. Various additives are used to change surface properties, i.e. to make the yarns more or less wettable. Water-soluble monofilaments are made from polyvinyl alcohol.
1.8.2 Multifilament yarn Due to the presence of a large number of thin fibres (fibre diameter 10–50 mm), the flexural rigidity of multifilament yarn is much lower than that of an equivalent monofilament yarn. The covering power of multifilament yarn is better than that of monofilament yarn. In a woven structure at the interlacement points, multifilament yarn gets flattened and thereby produces a fabric with low thickness and smooth surface in comparison to monofilament fabrics. Fibres with a circular cross-section come closer to one another, making the yarn compact in appearance and also leading to the largest area of contact with any external surface. Fibres with non-circular cross-section are inhibited from close proximity within a yarn and hence bulky yarns are produced from non-circular fibres. A bulky yarn leads to a bulky fabric, which improves thermal resistance and makes it suitable for extremely cold climates. The properties of a multifilament single yarn can be manipulated through twist. Multifilaments have a larger surface area than the equivalent monofilament yarns and therefore adhere better with a matrix material or coating.
1.8.3 Tape yarn The linear density of a tape yarn may lie in the range of 16,500 to 27,500 dtex. The yarn is lustrous and strong, with large covering power. Fibrillated tape yarns offer a spun look. Fibrillation reduces bending rigidity and makes the yarn soft. Fibrillatability varies from fibre to fibre. Polypropylene shows a higher splitting tendency than polyethylene at the same molecular orientation. Polyamide and polyester show less splitting tendency. Greater molecular attraction in the form of hydrogen bonding between the molecules increases the transverse strength of these polymers.
1.8.4 Spun yarn Spun yarns, made of short natural fibres or staple cut synthetic fibres, are hairy and therefore not as slippery and smooth as filament yarn. If made from the same fibre, spun yarns may be weaker than an equivalent filament yarn. However, they have a higher elongation than filament yarn. The most important structural parameter that affects the properties of spun yarn is twist. With increase in twist, yarn strength first rises, then attains a maximum and declines thereafter (Fig. 1.22). For multifilament yarn it starts declining practically from the beginning. This rise and fall of strength has been ascribed
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
45
Strength
Multifilament yarn
Spun yarn
Twist
1.22 Twist–strength relationship.
Table 1.13 Translation efficiency of various yarns Type of yarn
Translation efficiency (%)
Monofilament/tape Multifilament: Untwisted Slightly twisted Ring spun yarn: Soft twisted Hard twisted
100
Rotor Friction (dref-2) Wrap spun
30–55 (author’s data) 25–35 (author’s data) 25–60 (author’s data)
98 95 45 67
to the interaction between two opposite effects known as the obliquity effect (strength underutilization due to inclined placement of constituent fibres) and the diminishing slippage effect (due to greater transverse force due to helical configuration of fibres under tension). As a consequence an optimum is observed. The location of this optimum may vary from fibre to fibre, with length, fineness and frictional parameters. For multifilament yarn an initial rise in the low twist region is due to the mutual support that the filaments provide to each other due to frictional interaction between them which enhances with twist. The obliquity effect takes over quickly in the case of multifilament yarn. The strength translation efficiency that represents fibre strength utilization in yarn is highest for filament and tape yarns and usually less for spun yarns (Table 1.13).
© Woodhead Publishing Limited, 2010
46
Technical textile yarns
1.8.5 Wrap spun yarn The tenacity of wrap spun yarn depends not only on the core fibre tenacity and friction but also on the wrapping filament property and wrap density. With an increase in wrap density, the filament to fibre contact area increases, giving a higher radial force. Due to the increase in core fibre friction, the core fibres are restrained from slippage. As a result tenacity increases with the increase in wraps per metre (Table 1.14). Typical load–elongation behaviour of jute–polyester wrap spun yarns is shown in Fig. 1.23 [21]. The filament elastic modulus and fineness are also important in determining wrap yarn strength [22]. As the fibres in the core remain straight and parallel, the yarns are stronger than the equivalent ring yarn by around 30%. A higher wrap density can make the yarn stiff due to the increased packing of constituent core fibres which will hinder the free movement of fibres during bending.
1.8.6 Core spun yarn The properties of a core yarn can be engineered by selecting appropriate core and sheath fibres. By keeping a strong filament yarn in the core, the yarn can be made much stronger than equivalent conventional spun yarn. The modulus and strength of such yarn are manipulated through the properties of the core component. Similarly, through the use of an elastic core the yarn can be made into a stretch yarn, its stretchability being manipulated
Table 1.14 Typical properties of wrapped spun yarn [19] Yarn sample Wraps/m Tenacity Breaking Specific flexural Work of (g/tex) extension (%) rigidity (x 10–5) rupture (g.cm2) (g.cm2) Jute–polyester
200 220 240 260 280
10.19 11.51 11.93 12.00 12.39
2.00 2.75 3.66 4.03 4.36
2.11 2.20 3.27 3.15 3.53
968.1 1808.1 1845.6 2161.3 2045.0
Jute–nylon
200 220 240 260 280
8.57 8.84 10.6 10.3 11.4
3.39 3.64 4.19 4.89 5.38
1.90 3.04 3.01 2.92 3.18
1061.3 1245.6 1671.3 2090.0 2162.5
Jute fibre: linear density 2.02 tex, tenacity 26.6 g/tex, breaking extension 1.04%. Polyester fibre (36 filamemts): linear density 11.5 tex, tenacity 39.3 g/tex, breaking extension 24.0%. Nylon fibre (20 filaments): linear density 9.6 tex, tenacity 37.4 g/tex, breaking extension 45.6%.
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
47
3.0 C B 2.5
2.0 Load (kg)
A 1.5
1.0
0.5
0 0
0.5
1.0 1.5 2.0 Elongation (%)
2.5
3.0
1.23 Load–elongation curves for jute–polyester wrap yarn [21].
through the properties of the elastic core and the tension under which it is incorporated into the yarn.
1.8.7 Plied/cord yarn A plied structure improves many properties such as: ∑ ∑
Ability to absorb processing stress Improvement in cohesion by the entrapment of hairy ends or broken filaments ∑ Balancing of torque liveliness ∑ Improvement in load/stress distribution amongst filaments ∑ Improvement in tensile recovery behaviour. Typical load-elongation behaviour of tyre cord (construction parameters shown in Table 1.15) is shown in Fig. 1.24. It may be observed that either a decrease in the strand twist (keeping the cord twist constant) or a decrease in the cord twist (keeping the strand twist constant) results in steeper curves. The bending rigidity of a ply or cord increases with the ply or cord twist level, as with increase in twist the degree of freedom of fibre movement gets restricted within the structure.
© Woodhead Publishing Limited, 2010
48
Technical textile yarns
Table 1.15 Construction of cord yarns Type of cord
Fineness Construction (den)
Cord twist (turns/10 cm)
Kevlar A 9000 1500/2 × 3 20 B 20 C 20 Polyester A 9000 1500/3 × 3 11 B 29
Strand twist (turns/10 cm) 10 20 30 25 25
100 B A 80 B
40 C A
60 Load (kN)
Load (kN)
30
40
20
20
10
0
0
2 4 6 Elongation (%) (a) Kevlar
8
0 0
2
4 6 8 10 12 14 Elongation (%) (b) Polyester
1.24 Load–elongation curves for various kevlar (a) and polyester (b) cords as described in Table 1.15 [23].
1.9
Applications of mono- and multifilaments, tape, core spun, plied and cabled yarns
Application of technical yarns is primarily based upon the properties of their constituent fibres. The intrinsic properties of the raw material, i.e. the fibre, is of fundamental importance in this regard. It may so happen that a few fibres
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
49
may suit a given product specification and one has to choose one of them keeping in mind the cost, availability, manufacturability, etc. Many times the properties that are required in a specific product are such that no single fibre will suit it in all respects and in such cases an optimum combination of different fibre types and their spatial arrangement within the yarn becomes of paramount importance. It may so happen that to arrive at a specification closest to the product, not only fibre but also yarn combinations may need to be considered. Some typical examples of fibres used for a few technical products are shown in Table 1.16. One can find that the use of natural fibres in technical textiles is becoming more limited, though biodegradability is one of the strong attributes of all natural fibres and a renewed interest in the use of natural fibres in composite making can be observed. Many uses of technical yarns have been mentioned by Gong and Chen [24].
1.9.1 Monofilament yarn Monofilaments are suitable for those applications where stiffness is required, such as agrotech (ropes and nets), indutech (filters, conveyors, brushes Table 1.16 Yarn used according to application or special properties Generic products Products
Yarn types according to source or fibre
Protective textiles (mechanical, chemical, electrical)
Parachutes, airbags, Nylon, polyester, viscose electrostatic shielding fabric, rayon, PVA (polyvinyl alcohol) mountaineering ropes, safety nets, conducting textiles
Transport
Seat belts, tyre cords, conveyor belts, car seat covers, nets, hoses, sail cloth, tarpaulins
Acrylic, nylon, wool, polyester, polypropylene, aramid, carbon, polyethylene, glass, etc.
Geotextiles
Soil separators, soil reinforcement, filters
Jute, coir, polypropylene, polyethylene, polyester
Construction
Awnings, tarpaulins, safety nets
Acrylic, nylon, polyethylene, polypropylene
Technical apparel Bullet-proof, fire-retardant and heat-resistants products, gloves, sewing thread, sleeping bags, elastic yarn Farming
Sacks, bags, fishing nets, bird nets, cords, twines
High-modulus polyethylene (dyneema) aramid (kevlar, nomex, Twaron), modacrylic, FR viscose, FR polyester, wool, acrylic Cotton, flax, jute, polypropylene
Medical and hygiene Sutures, support bandages, Cotton, PVA (polyvinyl body bags, towels, mops, alcohol), silk, PTFE surgical gowns, swabs, etc. (polytetrafluoroethylene)
© Woodhead Publishing Limited, 2010
50
Technical textile yarns
screen printing cloth), sporttech (racquet string, fishing lines), cloth tech (zip fasteners, sewing thread) and meditech (pressure garments). Ropes and cords used in agriculture and fisheries are made from 0.2–0.5 mm diameter polyethylene and polypropylene fibres. Nylon monofilaments 0.1–5 mm in diameter are used for rope making. Conveyor belt fabric for paper machines requires high chemical and temperature resistance, toughness, durability, abrasion resistance and dimensional stability. Polyester and nylon (flat, square and rectangular) yarns are used to make the fabric to control air permeability and to give support to the paper. Filament diameter is typically 0.15–0.30 mm. Poly(ether ketone) (PEEK) and polyphenylene sulfide (PPS) are used for high-temperature applications. Hollow monofilaments are used to make softer sewing thread. Nylon monofilament 0.1–0.3 mm in diameter is used for sewing thread. HDPE, LDPE and PP monofilament can be used as shrink sleeve in the electrical industry, and as reinforcing cord in hoses. HDPE and LDPE can also be used in sutures and orthopedic braces. Polypropylene and nylon (0.3–0.5 mm diameter) are also used as medical thread. Elastomeric monofilaments can be used to make pressure garments. Nylon and polyethylene monofilaments (0.4 mm diameter) are used in fishing line and netting, in sports racquets and in conveyor belts and safety straps. PVC monofilaments, being cheap, and nylon monofilaments, being more resistant to abrasion, are used for domestic brushes, polypropylene for street cleaning and paint brushes, and polyethylene monofilament for car wash brushes, being soft and flexible. Some products suitable for monofilaments are suggested in Table 1.17.
1.9.2 Multifilament yarn Multifilament yarns have a wide range of uses. In almost all types of technical textile products, multifilament can be used. The fineness of individual filaments in a multifilament yarn lies between 0.22 and 1.67 tex and their diameter could be 1 mm or less. To give two examples, strength, elongation, flexibility, permeability and weight are the most important characteristics of airbag fabric, so the yarn should be strong and flexible, hence low denier per filament multifilament nylon or polyester yarns are used. In the case of car seat belts, shock absorption is the most important criterion. The body has to be decelerated at a specific rate which does not cause injury to the body. Hence, nylon and polyester multifilament yarns are ideal. Some typical examples are shown in Table 1.18.
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
51
Table 1.17 Products from monofilament yarns Product Requirements Fibre used
Filament diameter
Conveyors for Temperature, Polyester, 0.5–0.8 mm paper making dimensional stability, polyphenylene machines abrasion resistance, sulphide (PPS), exposure condition poly(ether ether keytone), nylon Filter fabrics Temperature, exposure Polypropylene, nylon 0.03–0.4 mm (open sieve) condition 6, polyester, PPS, PBTP, PEEK Brushes (floor brush, Recovery, creep Nylon, polyethylene, 0.1–1.5 mm street cleaning, performance, abrasion PVC, polypropylene painting, car wash, resistance, cost, food cleaning, dish temperature resistance washer) Fabrics for screen Shape and regularity Polyester 0.03–0.1 mm printing industry of textile cell, dimensional stability Table 1.18 Products from multifilament yarns Seat belt webbing Requirement : Light weight, high abrasion resistance, excellent recovery characteristics, heat and light resistance, flexibility in use, etc. Fibre used: High tenacity polyester multifilament yarn Linear density or diameter : 500/750/1000/1500 dtex Airbags Requirement : High tear strength, controlled air permeability, foldable Fibre used: High tenacity multifilament nylon 6 and 6.6, polyester Linear density of yarn: 210/420/630/840 den Linear density or diameter of fibre: 2.5–4.2 den Tenacity and elongation: 75–84 cN/tex and 20–22% Sail cloth Requirement : Light weight, sunlight resistance, tear resistance Fibre used: Polyester, polyethylene yarns (Spectra, Dyneema) Linear density : 5–550 dtex Cut resistance fabric Requirement : strong Fibre used: PBO, aramid, polyethylene Linear density : 400–500 den Safety belts Requirement : shock absorption, flexible, abrasion resistance Fibre used: nylon and polyester multifilament yarn Linear density : 550–5500 dtex Tenacity and elongation: 4.9–6.2 cN/dtex, 27% Tyres Requirement : tensile fatigue resistance Fibre used: nylon, polyester multifilament yarn Linear density : 800–1500 den
© Woodhead Publishing Limited, 2010
52
Technical textile yarns
1.9.3 Tape yarn Tape yarns are mostly used in woven products (sacks) and special cordage. Being flat they can provide good cover. Polypropylene tapes (20–40 mm wide, 0.06–0.1 mm thick and of fineness 1600–2700 tex are typically used for these applications.
1.9.4 Core spun yarn Core spinning offers enormous scope to combine different fibres by selectively positioning them in the core and the sheath in order to engineer a yarn for a specific end use. Three-ply (polyester core and cotton sheath) yarns are used as sewing threads. Polyester provides the strength whereas cotton provides a frictional surface and protects it from melting at high sewing speed. Yarns with fibreglass or carbon filament in the core and with aramid fibre cover are used in flame-retardant fabric. Yarns with an elastic core and nylon or polyester as sheath are used to produce stretch fabrics, swimsuits, elastic tape, pressure garments, etc.
1.9.5 Plied and cabled yarn Rope yarn Rope yarns are made from both natural and synthetic fibres. Natural fibre yarns such as manila and sisal have a fineness in the range of 560–6700 tex [25]. They are usually Z twisted. The tenacity of such yarns lies in the range of 21–30 g/tex. Rope yarns can be either single or folded. Since twisting causes loss in strength (to the order of 50%) from fibres to yarns, minimum twist is imparted into the yarns. The purpose of twist is more to hold the fibres together for ease of processability. Besides, it also improves abrasion resistance. For synthetic fibres, the common fineness of rope yarn is 3105 tex with twist around 50 turns/m. Eighteen basic yarns of 93 tex (840 den) are combined together to form a single yarn of 1680 tex and then two or three of them are twisted together to form rope yarn. There is no standard for rope yarn diameter and it is usually chosen to be one-tenth of the rope diameter. Tyre cord yarn Tyre cord yarns are of cabled structure and made from nylon, polyester and aramid fibres. Nylon has high strength and excellent fatigue resistance. However, owing to its low glass transition temperature and lower modulus, it is not suited for high-speed application. Polyester fibre yarn, on the other hand, being superior to nylon yarn in these respects, is preferred in radial
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
53
and high-speed tyres. Aramid yarns, although superior in all other respects, find limited use due to their low compressive fatigue resistance. The size and tenacity of typical tyre yarns are 1100 dtex and 6.6 N/dtex for PET, 1400 dtex and 8.4 N/dtex for nylon 6,6, and 1670 dtex and 20.3 N/dtex for kevlar fibres, respectively [26].
1.10
Market
The market for technical yarns is intimately linked to the growth of technical textiles. According to Beckmann [27] the factors responsible for growth are: ∑ Advancement in material and processing technology causing replacement of solid materials used in building and composites ∑ Stringent environment (filtration) and safety regulations (protective clothing) ∑ Growth in income in developing countries leading to more recreational activities (sports) ∑ Ageing population. Technical yarns are dominated by polyester and polyamide which together have captured 85% of the market. The most prosperous markets are in PR China, Taiwan and Brazil. Annual global production has been estimated to be 2.6 million tonnes [28]. The major consumer of industrial yarn is the automotive industry. Keldany [29] has reported that the demand for indutech textile (finest filter to conveyor belt) will increase mainly in China and India. The demand for buildtech textile is directly dependent on construction activity and major international events such as the Olympic Games, World Cup, Asian Games, Commonwealth Games, etc., as many non-permanent structures are erected that need covering fabrics. The growth of geotextiles used in building roads, railways, bridges, dams, etc., will be in the order of 5.6%. The demand for packagetech requiring heavy dense fabrics for sacks, flexible intermediate bulk containers and light lapping fabrics is directly linked to the growth of the economy. Agrotech, consisting of shading fabrics to ground coverings for weed control and growth, is difficult to estimate. Global spandex production is estimated to have been 340,000 tons in 2006 and is estimated to increase to more than 500,000 tons per year in 2010 [30]. The fastest-growing consumer markets are in northeast and southern Asia. The consumption of fibres in technical textiles is still much lower in comparison to their apparel and home textile uses and the market is bound to grow in the future.
© Woodhead Publishing Limited, 2010
54
1.11
Technical textile yarns
References
1. Byrne, C. (2000) ‘Technical textile market – an overview’, in Handbook of Technical Textiles ed. A. R. Horrocks and S. C. Anand, The Textile Institute, CRC Press, Woodhead Publishing, Cambridge, UK. 2. Krässig, H.A., Lenz, J and Mark, H.F. (1984) Fiber technology: from Film to Fiber, International Fiber Science and Technology Series 4, Marcel Dekker, New Yok. 3. Uster News Bulletin, No. 37, August 1990, Zellweger Uster. 4. Dang, M., Zhang, Z. and Wang, S. (2006) ‘Properties of wool/spandex core spun yarn produced on modified woolen spinning frame’, Fibres and Polymers 7(4), 420–423. 5. Alagirusamy, R., Fangueiro, R., Ogale, V. and Padaki, N. (2006) ‘Hybrid yarns and textile preforming for thermoplastic composites’, Textile Progress 38(4), 1–71. 6. Brunnschweiler, D. (1953) ‘Braids and braiding’, J. Textile Institute, 44, 666–686. 7. Xue, P., Park, K.H., Tao, X.M., Chen, W. and Cheng, X.Y. (2007) ‘Electrically conductive yarns based on PVA/carbon nanotubes’, Composite Structures 78, 271–277. 8. Shaikhzadeh Najar, S., Kaynak, A. and Foitzik, R.C. (2007) ‘Conductive wool yarns by continuous vapour phase polymerization of pyrrole’, Synthetic Metals 157, 1–4. 9. Fugetsu, B., Akiba, E., Hachiya, M. and Endo, M. (2009) ‘The production of soft, durable and electrically conductive polyester multifilament yarns by dye printing them with carbon nano tubes’, Carbon 47, 527–544. 10. Cheng, K.B. and Ueng, T.H. (2001) ‘Friction core spun yarns for electrical properties of woven fabrics’, Composites, Part A 32, 1491–1496. 11. Hearle, J.W.S., Grossberg, P. and Backer, S. (1969) Structural Mechanics of fibers, yarns and fabrics, Wiley interscience, New York. 12. Porwal, P.K., Beyerlein, I.J. and Phoenix, S.L. (2007) ‘Statistical strength of twisted fibre bundles with load sharing controlled by frictional length scales’, Journal of Mechanics of materials and structures, 2(4), 773–790. 13. Scardino, F. (1989) ‘An introduction to textile structures and their behaviour’, in Textile Structural Composites, ed. by T.-W. Chou and F.K. Ko, Elsevier Science, New York, 1–26. 14. Madsen, B., Hoffmeyer, P., Thomsen, A.B. and Liholt, H. (2007) ‘Hemp yarn reinforced composites–yarn characteristics’, Composites, Part A 38, 2194–2203. 15. Hearle, J.W.S., Hollick, L. and Wilson, D.K. (2000) Yarn Texturing Technology, The Textile Institute, CRC Press, Woodhead Publishing, Cambridge, UK, p. 61. 16. Hearle, J.W.S. (1989) ‘Mechanics of yarns and non-woven fabrics’, in Textile Structural Composites, ed. T.-W. Chou and F.K. Ko, Elsevier Science, New York, 27–64. 17. Treloar, L.R.G. (1956) ‘The geometry of multi-ply yarns’, J. Textile Institute, 47, T348–T367. 18. McIntosh, B.M. (1994) ‘Specialized uses 4: Monofils’, in Synthetic Fibre Materials, ed. H. Broody, Polymer Science and Technology Series, Longman Scientific and Technical, Harlow, UK, 261–272. 19. Morton, W.E. and Hearle, J.W.S. (1993) Physical Properties of Textile Fibres, The Textile Institute, Manchester, UK, 410–412. 20. Fourné, F. (1999) Synthetic Fibres–Machines and Equipment, Manufacture, Properties, Hanser Publishers, Munich, 786.
© Woodhead Publishing Limited, 2010
Introduction: types of technical textile yarn
55
21. Sengupta, A.K., Chattopadhyay, R.S., Sengupta, S. and Khatua, D.P. (1991) ‘Some studies on structure and properties of wrapped jute (parafil) yarn’, Indian Journal of Fibre and Textile Research 16, 128–132. 22. Miao, M., How, Y.L. and Cheng, K.P.S. (1994) ‘The role of false twist in wrap spinning’, Textile Research Journal 64(1), 41–48. 23. Chattopadhyay, R. and Kawabat, S. (1993) ‘Geometry of cord cross-section and contraction of cord diameter due to longitudinal extension’, Indian Journal of Fibre and Textile Research 18, 1–7. 24. Gong, R.H. and Chen, X. (2000) ‘Technical yarns’, in Handbook of Technical Textiles ed. A.R. Horrocks and S.C. Anand, The Textile Institute, CRC Press, Woodhead Publishing, Cambridge, UK, 42–60. 25. Klust, G. (1983) Fibre Ropes for Fishing Gear, Food and Agriculture Organization of the United Nations, Farnham, Surrey, UK, 12–28. 26. Chawla, S.K. (1994) ‘Rubber composites’, in Synthetic Fibre Materials, ed. H. Brody, Longman Scientific and Technical, Harlow, UK, 202–230. 27. Beckmann, R. (2000) ‘The international market for technical textiles from the market standpoint’, Melliand International 6, 136. 28. Anon. (2007) ‘Global market trends for industrial yarns’, Melliand International 3, 168. 29. Keldany, R. (2005) ‘Market trends for technical fabrics’, Melliand International 4, 308–309. 30. Anon. (2007) ‘Global elastane (spandex) yarn production 340,000 tons’, Melliand International 3, 166.
© Woodhead Publishing Limited, 2010
2
Advances in yarn spinning and texturising
R. V. M. G o w d a, V.S.B. Engineering College, India
Abstract: This chapter deals with the advances in yarn spinning technologies, developments in yarn properties and specific applications of various yarns. It also discusses the prominent yarn texturising technologies, innovations and technical applications of texturised yarns. Finally, it highlights the future trends in yarn spinning technologies. Key words: advances, yarn spinning technologies, yarn properties, yarn texturising.
2.1
Introduction to various yarn spinning technologies
Ring spinning, invented by John Thorpe in 1830, has been very successful in producing yarns from staple fibres. It has been reported in the literature that up until the 1960s most of the yarns produced from staple fibres were spun on the ring spinning system, which enjoyed a monopolistic status of production. Though ring spinning is a versatile system for processing a wide variety of fibres into a broad range of counts, spinners, researchers and machine manufacturers have become increasingly aware of its technological and economic limitations, which were the subject of much discussion, and as a result, machine makers and researchers have been on the lookout for new and future oriented spinning technologies. The aim of most of these new technologies was to increase productivity, improve or at least retain yarn quality, and ensure increased efficiency in subsequent processing. It was in 1967 that the aim became a commercial possibility with the introduction of the BD 200 rotor spinner, which did away with the concept of spindle twisting. Since then, the rotor spinning system has established itself in the coarse and medium count range. However, as rotor speeds reached 175,000 rpm, the rotor diameter had to be decreased to around 28 mm to accommodate such a high speed. Therefore, it was felt that this system too had reached its practical limits with regard to productivity. Thus the search for other spinning systems continued. In 1973, Ernst Fehrer developed the friction spinning system, which was commercialised in 1977 under the name DREF 2. In this system, the spinning speed is as high as 300 m/min and is not limited by the yarn tension. Theoretically, very high rotation speeds are attainable. At the beginning 56 © Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
57
of the 1980s, Murata Jet Spinning was developed and commercialised by Murata Machinery, Japan. Today, this system is commercially successful in the production of medium and fine counts from synthetic fibres, cotton and blends thereof. Murata Vortex Spinning, introduced at ITMA ’99, is another revolutionary system for the production of fasciated yarns, and is gaining greater momentum in the production of yarns from synthetics and cotton in pure form or blends. Of late, other spinning methods such as core yarn spinning and wrap spinning have also become popular to produce yarns for certain applications. This chapter discusses the developments in yarn spinning technologies, properties and applications of these yarns.
2.2
Compact spinning
Although ring-spun yarns have unique structure and good strength, they are not perfectly ideal. A careful examination of a ring-spun yarn under a microscope reveals that the integration of many fibres is poor; and such fibres form hairs, which do not contribute to yarn strength [1]. This is due to the effect of spinning geometry during yarn formation. In conventional ring spinning the fibres supplied by the drafting system are collected by the spinning triangle and integrated into the yarn structure. For a specific yarn of given count and elongation values, the width b of the spinning triangle depends mainly on spinning tension p; and experiments have shown that b varies inversely with p, but the width B of the fibres fed is always greater than the width b of the spinning triangle (Fig. 2.1). Therefore, the spinning triangle is unable to capture all fibres fed in, which means that the peripheral fibres are either lost or integrated improperly [1, 2]. In view of these shortcomings of the yarn formation process, machine manufacturers thought of exploring possible ways of condensing the drafted ribbon before it is twisted into a yarn. This led to the development of compact spinning. The prominent compact spinning methods are the ComforSpin process of Rieter, EliTe spinning developed by Suessen, the Air-Com-Tex process of Zinser and the RoCoS compact spinning system of Rotorcraft. B
B
b
b Bring = Bcom4 bring > bcom4
Ring spinning
ComforSpin®
2.1 Yarn formation in ring spinning and Comfor spinning [3].
© Woodhead Publishing Limited, 2010
58
Technical textile yarns
The principles of working of these methods of condensing the drafted strand of fibres are described below.
2.2.1 ComforSpin process In Rieter’s ComforSpin process, an intermediate zone is inserted between the draft and yarn formation zones. In this zone, the ready-drafted ribbon of fibres is condensed laterally by means of aerodynamic forces. A perforated drum replaces the delivery roller of the drafting system (Fig. 2.2). A fixed suction system generating a vacuum is fitted inside this perforated drum, which results in a current of air flowing from outside into the drum. The fibres supplied from the delivery nip line of the drafted system are then held firmly on the surface of the perforated drum and move with the circumferential speed of the drum. A subsequent top roller and the drum clamp the spinning triangle, i.e., the yarn formation occurs immediately after this second nip. The web of fibres is condensed in the intermediate zone between the two top rollers on the perforated drum, as a result of which the width B of fibres fed is
1 Perforated drum 4
2 Suction system
3
3 Bottom roller 4 Top roller 2
5 Nip roller 6 Air guide element
5
6
1
Air guide element Air
Air
Suction
2.2 ComforSpin process [3].
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
59
approximately equal to that of the spinning triangle. The compacting effect depends largely on the combination of the metal cylinder with precision perforation, suitable surface structure, flexible suction inserts, and air guide elements. The cross-section of the compacting system in the illustration given in Fig. 2.2 indicates the way the air is guided to the fibre strand for a full compacting effect [3]. The condensed yarn so produced, known as COM4 yarn, as compared to an equivalent conventional ring yarn, exhibits less hairiness, higher strength and elongation, less environmental impact and unequalled wearing comfort [3]. The term COM stands for ‘comfort’, which has always been a reflection of lifestyle and the greatest feeling of well-being, and the number 4 denoted the four distinct advantages of COM4 yarn as highlighted above. The improvement in COM4 yarn quality can be indicated by the COM4 value, which is given by [1]:
COM4 value =
100,000 yarn twist (tpm) ¥ Yarn hairiness, H
2.2.2 EliTe spinning In the EliTe spinning system, developed by Suessen, the drafted ribbon of fibres is condensed with the help of a specially developed lattice apron [4]. A tubular profile subjected to negative pressure is closely embraced by a lattice apron. The delivery top roller, fitted with rubber caps, presses the lattice apron against the hollow profile and drives the apron, at the same time forming the delivery nipping line (Fig. 2.3). The tubular profile has a small slot, which commences at the immediate vicinity of the front roller nipping line and ends in the region of the delivery nipping line. This creates an air
Lattice apron
2.3 Schematic of EliTe spinning [4].
© Woodhead Publishing Limited, 2010
60
Technical textile yarns
current through the lattice apron as the slot is located towards the inside of the profile tube. The air current seizes the fibres after they leave the front roller nipping line and condenses the fibre strand, which is conveyed by the lattice apron over a curved path and transported to the delivery nipping line. The suction air pressure and number of holes in the lattice apron influence the condensing action of the fibres. The condensed yarn produced is claimed to have higher strength and lower hairiness as compared to the conventional ring spun yarn.
2.2.3 Air-Com-Tex 700 process With the Air-Com-Tex 700 process [1], offered by Zinser, the drafted strand of fibres emerging from the three-cylinder drafting system is taken from the nip line by the airflow and is condensed under suction on a perforated surface (Fig. 2.4).
2.2.4 RoCoS compact spinning The RoCoS compact spinning system, developed by Hans Stahlecker of Rotorcraft Maschinenfabrik, Switzerland, is incorporated into LMW’s LR6AX short-staple ring-spinning frame. It was exhibited at ITMA 2003 and ITME 2004 [5]. This magnetic compacting system replaces the normal top front roller with a pair of smaller rollers between which is a condenser. The condenser is held against the bottom front drafting roller by means of a magnet (Fig. 2.5(a)). The RoCoS device (Fig. 2.5(b)) consists of the cylinder (1 in Fig. 2.5(a)), the front roller (2), the delivery roller (3), the Supra-Magnets equipped with ceramic compactors (4), the supporting bridge, the yarn guides and the top roller holders with the weighting spring [6]. RoCoS, the Rotorcraft Compact Spinning System, works without air suction and uses magnetic mechanical principles only. The bottom roller (1) supports the front roller (2) and delivery roller (3). The condensing zone extends from clamping line A
2.4 Air-Com-Tex 700 process [1].
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
61
A
4 2
B
4 3
1 (a)
(b)
2.5 (a) Schematic of RoCoS compact spinning; (b) RoCoS device [6].
to clamping line B. The very precise magnetic compactor (4) is pressed by permanent magnets without clearance against cylinder 1. It forms together with the bottom roller an overall enclosed compression chamber whose bottom contour, the generated surface of cylinder 1, moves synchronously with the strand of fibres and transports this safely through the compactor. In respect of yarn fineness and yarn twist, the standards usual in the industry are applicable. Compactors for coarse, medium and fine count yarns ensure ideal compacting. According to Stahlecker, RoCoS 1 is suitable for cotton, both pure and as blends with synthetic fibres, as well as for pure synthetics with a maximum staple length of 60 mm (2.5 inches). On the other hand, RoCoS 2 is suitable for wool, both pure and as blends with synthetic fibres as well as for pure synthetics, having a minimum staple length of 50 mm (2 inches). The compact-spun yarns, in addition to their extensive applications in apparel production, find scope for production of technical yarns such as sewing threads, embroidery threads, core-spun yarns, etc.
2.3
Rotor spinning
2.3.1 Principle of operation Rotor spinning, working on the principle of open-end spinning, consists of the following operations in sequence [7]: 1. 2. 3. 4.
Opening of feed sliver into individual fibres Assembling of individualised fibres Twist insertion Withdrawal of resultant yarn and winding onto a package.
In rotor spinning, the individualised fibres carried by the air current are deposited continuously on the internal peripheral surface of a rapidly rotating drum, called the rotor, to form a fibrous ring (Fig. 2.6). The rotation of the
© Woodhead Publishing Limited, 2010
62
Technical textile yarns 8 7
3
1
4
2
1. Feed sliver 2. Feed roller 3. Opening roller 4. Transport tube
5. 6. 7. 8.
6
6
5 Rotor groove Withdrawal tube Delivery rollers Yarn arm inside the rotor
2.6 Principle of rotor spinning [7, 8].
rotor imparts twist to the fibrous ring, which is then peeled off and withdrawn along the axis of the rotor. The first rotor spinning machine, the KS 200, was demonstrated publicly at Brno in 1965, and the first commercial machine, the BD 200, appeared in 1967. Since then, rotor spinning has evolved through several stages and is now very well established in the coarse and medium count sector. The sequence of operations involved in rotor spinning can be broadly grouped into four units, namely fibre individualisation, fibre assembly, twist insertion, and withdrawal of resultant yarn. All these operations are described briefly as below [7, 8]. Fibre individualisation A drawn sliver, generally a two-passage drawframe sliver, is fed by a feed roller at a certain rate to an opening roller. The opening roller, or combing roller, clothed with saw teeth or pinned teeth and rotating at high speed, opens the sliver into individual fibres. The opening roller speed may vary from 6500 rpm to 9000 rpm, depending upon the type, length and fineness of fibre, and the thickness of feed. The profile of the opening roller teeth also varies with the type of fibre to be processed. Fibre assembly The individual fibres are carried forward from the opening roller by an air current through the feed tube or transport tube, the conical shape of
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
63
which accelerates the air current, leading to improved fibre orientation and straightness. The fibres carried by the air current are deposited at the groove of the rotor in the form of a ring. Twist insertion As the rotor rotates, the centrifugal force presses the fibre band against the inner peripheral surface of the rotor, causing it to rotate and thereby inserting twist to the fibre assembly. The rotational speed of the rotor may vary from 50,000 rpm to 175,000 rpm, depending upon the fibre type and yarn count to be spun. Withdrawal of resultant yarn The spinning of yarn starts by inserting a seed yarn through the withdrawal tube. The yarn end makes contact with the rotating tail of the fibre assembly. The yarn so formed is withdrawn continuously at certain rate (100–250 m/ min) by take-up rollers and wound onto a package.
2.3.2 Latest developments in rotor spinning Rotor spinning has become very well established in the coarse and medium count sector. Due to increasing demand on productivity, rotor speeds have been reaching as high as 175,000 rpm with the rotor diameter correspondingly decreasing to 28 mm. Following are some of the highlights of the latest developments in rotor spinning machinery and processing. To improve the yarn quality further, Suessen has modernised the SE 8 and SE 9 spin boxes into compact spin boxes SC 1-M and SC 2-M on their Autocoro 288 rotor spinner [9] with the incorporation of the following special functional elements/accessory devices. Adjustable BYPASS The adjustable BYPASS, which is an auxiliary opening for air, allows a higher air velocity in the fibre feed chamber and a lower air velocity in the trash extraction chute, which improves fibre removal from the opening roller, reduces dolphin jumps, i.e., less dirt in the yarn, facilitates a turbulence free airstream in the trash extraction chute, reduces extraction of good fibres, i.e., makes better usage of fibres, permits accurate setting of the extracted trash percentage, keeps the rotor groove clean over a longer period, reduces end down and imperfections, makes clearer cuts, and improves yarn quality and spinning stability.
© Woodhead Publishing Limited, 2010
64
Technical textile yarns
Speedpass The SPEEDPASS increases the air velocity from the opening roller housing through the fibre channel up to the rotor, and thus ensures better removal of synthetic fibres, in particular polyester, which has a lapping and recirculating tendency. An additional cavity, the ‘swan neck’, in the opening roller housing is provided to improve sliding of fibres into the fibre channel. Also, the newly designed opening roller type S 43 DN with special coating improves fibre removal. Torque-Stop The Torque-Stop is a small, easily replaceable twist-blocking device, which increases false twist in the yarn arm inside the rotor. The Torque-Stop is generally situated inside the navel and either serves to reduce the number of end breaks for a given twist factor or permits a reduction in the twist factor for a given number of end breaks. In any case this device will ensure a substantial increase in productivity. Corolab ABS This system is used to detect coloured foreign particles on the yarn exterior in the Autocoro rotor spinning machine. With this system, the measuring head is located in the yarn take-off tube in the spinning box directly behind the Torque-Stop. The detection system is based on the absorption principle. The measuring head consists of a light impermeable circle in which four illuminating diodes are located as transmitters and four photo diodes as receivers. As yarn with no foreign fibre absorbs less light than one contaminated by foreign fibres, the quantity of absorbed light varies and the foreign fibre is detected. The length, colour intensity and number of foreign fibres can be determined and the yarn portion containing foreign matter is cleared. Table 2.1 depicts the improvement in yarn quality and the increase in production caused by modernisation of the spin boxes in rotor spinning [9,10]. Autocoro 360 is the new rotor spinning machine introduced very recently by Schlafhorst that yields greater productivity and flexibility with four Coromats per machine. It has up to 360 spinning units and take-up speeds of up to 300 m/min are possible [11]. The innovations in important functional parts of this machine are highlighted below. Corobox SE 12 spinbox The universal Corobox SE 12 spinbox is accurate and more economical and offers greater flexibility with the intelligent Single Drive Sliver Intake
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
65
Table 2.1 Benefits of SC 1-M and SC 2-M spinboxes [7, 9] Description 20 Ne cotton 30 Ne cotton
SE 8
SC 1-M
SE 8
SC 1-M
Rotor speed (rpm) 67,000 84,000 85,000 117,000 Delivery rate (m/min) 155 185 83 115 Unevenness (CV%) 12.3 12.2 15.2 15.0 IPI 8 5 67 65 Tenacity (cN/tex) 12.0 12.8 10.6 12.5 Production increase – +25.3% – +38%
20 Ne PES/cotton (50:50) SE 8
SC 2-M
95,000 150 14.8 82 13.0 –
96,000 168 13.5 65 13.9 +12%
(SDSI) and 20- to 450-fold drafts. No matter whether the yarns spun are from natural or artificial fibres or blends of these, or are smooth or structured yarns, the Corobox SE 12 is capable of handling all applications. This new spinbox gives the Autocoro 360 a level of flexibility and a yarn quality never previously achieved. The SDSI guarantees a precisely defined fibre feed by means of stepping motors in each spinbox. This is crucial for the manufacture of reproducible fancy yarns. With the Corobox SE 12, only one feed is required for all yarn counts, a major advantage. Even coarse slivers of up to 7 ktex are spun into fine yarns due to the wide draft range of 20- to 450-fold [11]. Fancynation This is a new route to fancy yarn production with a unique drive and control concept that results in higher productivity. Fancynation is the modular hardware and software integrated into the Autocoro 360 to facilitate the production of fancy yarns. Fancy yarn manufacture is more productive and reproducible than ever before with fancynation, as the mechanical constraints commonly encountered in the past have been eliminated by the Corobox SE 12 with SDSI. The central platform for all effects is the FancyPilot. A variety of tools such as the QuickDesigner, 2D-interactive GraphicDesigner and 3D simulations are used to generate and modify effects easily, quickly and with little effort on the screen. Repeat changes, the simulation of effects on yarn panels and in knits and wovens on the screen make product development easier. Machine setting parameters are linked automatically to effect data in the software and setting recommendations are stored with spinning components, also enhancing the reproducibility of fancy yarn production. Other notable system modules are FancyControl for monitoring the quality of the yarn spun online, FancyProfile for displaying the yarn diameter and progression of effects, FancyOasis Gold with extended simulation functions such as stonewash finishes, and FancyLink for measuring and entering yarn patterns.
© Woodhead Publishing Limited, 2010
66
Technical textile yarns
Other fundamental elements of fancy yarn production on the Autocoro 360 include new spinning components developed specially for fancy yarns, such as GT rotors and a compact feed tray, along with the precise, electronically controlled spinning vacuum achieved with the Electronic Vacuum Adjustment (EVA) system. Coropack The Autocoro packages have set new standards with the following parameters: ∑ ∑
Coro Value Package (CVP): compact, optimum unwinding properties Heavy Weight Package (HWP): economical, up to 5 kg weight.
The new CoroPack generation of packages is synonymous with greater efficiency and quality. The Coro Value Package (CVP) guarantees a low, homogeneous winding tension that will not have a detrimental effect on the yarn. The yarn elongation is thus up to 1% higher than on conventional packages. As a result, the new packages are distinguished in weaving and knitting mills by up to 70% fewer yarn breaks [11]. Polypropylene clearing system The Autocoro 360 is equipped with the new Corolab 8 and Corolab 8PP yarn monitoring system on which even foreign fibres of materials such as polypropylene or nylon used in bale packaging can be cleared along with film residues. The Corolab 8PP is based on the tribo-electric effect. Polypropylene fibres trigger a clearer intervention, in the case of both cotton yarns and blended cotton yarns. Every basic clearer in the Corolab 8 system is already configured in readiness for retrofitting the polypropylene sensor, so that this can be installed at any time subsequently [11]. Magnetic rotor positioning system (MRPS) This system is an optional arrangement provided on the Autocoro 360 rotor spinner, where the new rotor axial bearing assembly of the Corobox SE 12 fixes the rotor entirely without contact. The following are the salient features of this system [11]: ∑ Energy saving and oil-free or lubricant-free drive system ∑ Clean spinbox environment ∑ Long cleaning and extended maintenance intervals ∑ Carbon fibre reinforced rotor brake ∑ Reduced spare parts requirements.
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
67
Rieter Machinery also came out with their innovative R 40 rotor spinner [12], which is readily commercialised. These latest machines have salient features such as rotor diameters from 28 to 56 mm, rotor speeds up to 140,000 rpm, delivery speeds up to 220 m per minute, overall draft up to 400, VARIOdraft – infinitely variable and adjustable draft, twist, and winding tension, ROBOfeed – automatic sliver insertion system, SERVOcan – automatic can handling and changing process, SERVOcone – automatic package linking and removal system, and connection to the SPIDERweb mill data system. All these innovations have led to increased rotor speeds up to 170,000 rpm, reduced ends down per kg yarn by up to 70%, thus increasing machine efficiency and production, enhanced yarn evenness and reduced yarn imperfections and classimat faults by up to 40%, reduced variation in yarn patterns from spinning position to spinning position, lengthened cleaning and maintenance intervals by up to 30%, and produced cleaner yarns. As regards the production of technical yarns, rotor spinning offers scope to produce core-spun yarns, cable and tyre-cord yarns, etc.
2.4
Friction spinning
2.4.1 Principle of operation Friction spinning is an ‘open-end’ and/or a ‘core–sheath type’ spinning, in which the yarn formation takes place with the aid of frictional forces in the spinning zone. Friction spinning, as originated earlier, was based on the principle of ‘open-end spinning’, and later on ‘core–sheath’ type spinning. The different machine versions of friction spinning developed over the years include the Masterspinner from Platt Holingsworth and a series of DREF spinning machines from Fehrer AG. The Masterspinner was a laboratory model that spins staple fibres into yarns in the count range of 10–40 s Ne at delivery speeds up to 300 m/min. This machine, however, could not attain much commercial success [7]. Fehrer developed the DREF friction spinning system in 1973. In the very first machine, the DREF 1 friction spinner, due to the absence of positive control over the assembly of fibres, a lot of slippage occurred between the fibre assembly and the perforated roller, which reduced the twisting efficiency. Hence this development could not be commercialised. In order to reduce slippage and improve twisting efficiency, the concept of enclosing the fibre assembly between two perforated friction drums was introduced. This formed the basis for the commercial development of later DREF spinning machines, namely DREF 2, DREF 3, DREF 2000 and DREF 3000. The DREF 2 friction spinner operates on the basis of a patented mechanical/ aerodynamic spinning system and is typified by the use of two perforated
© Woodhead Publishing Limited, 2010
68
Technical textile yarns
friction drums with internal suction and the same direction of rotation. A schematic drawing of the DREF 2 friction spinner is shown in Fig. 2.7 [13]. It essentially consists of a specially designed inlet system, which retains the slivers and provides the required draft. These drafted slivers are opened into individual fibres by a rotating carding drum (opening roller) covered with sawtooth-type wire clothing. The individualised fibres are stripped from the carding drum by a centrifugal force supported by an airstream from the blower, and are transported into the nip of two perforated friction drums where they are held by suction. The fibres are subsequently twisted by mechanical friction on the surfaces of the drums. The suction through the perforations of the drums assists this process besides helping in the removal of dust and dirt, thereby contributing to the production of a cleaner yarn [14]. In 1977, the first DREF 2 machine appeared in the market, which was the first friction spinning machine in practical operation. The low yarn strength and the requirement of a greater number of fibres in the yarn cross-section have restricted the DREF 2 spinning to coarser counts (0.5–6 s Ne). In summer 1978, based on the experiences gained for few years with the DREF 2 spinning machine, the first developmental step for the DREF 3 had taken place and the first machine was introduced into the market by the end of 1981 and beginning of 1982. The DREF 3 machine was developed basically to improve the yarn quality, to extend the yarn count to finer ends (up to 18 s Ne) and to produce multi-component yarns. Unlike the DREF 2 and Masterspinner, the DREF 3 is not an open-end spinning machine, but a core–sheath type friction spinning arrangement [15] as shown in Fig. 2.8 [16]. On this machine, an attempt is made to improve Blower air Carding drums Inlet rollers
Suction inserts Spinning drums
2.7 Schematic diagram of DREF 2 friction spinner [13].
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
69
Sheath slivers Winding aggregate Drafting unit II
Outlet Core sliver
Drafting unit I
Spinning aggregate Core feeding
2.8 DREF 3 friction spinner [13].
the quality of yarn, by laying a part of the fibres in an aligned fashion along the direction of the yarn axis in the core. The remaining fibres are wrapped round the core fibres to form the sheath. The sheath fibres are attached to the core fibres by the false twist generated by the rotating action of the drums. Two drafting units are therefore used in this system, one for the core fibres and the other for the sheath fibres. This system produces a variety of core–sheath type structures and multi-component yarns, through selective combination and placement of different materials in core and sheath, in the count range of 1–18 s Ne with a delivery speed as high as 300 m/min.
2.4.2 Latest developments in friction spinning DREF 2000 The DREF 2000 friction spinning machine as shown in Fig. 2.9 [16] is the latest development in friction spinning and attracted the attention of technical textile producers during ITMA ’99. The DREF 2000 employs the classic DREF system with a rotating carding drum opening the slivers into single fibres and a specially designed inlet system being used for sliver retention. The fibres are stripped from the carding drum by centrifugal force and carried into the nip of the two perforated spinning drums. The fibres are subsequently twisted by mechanical friction on the surface of the drums, which rotate in the same direction. The process is assisted by air suction through the drum
© Woodhead Publishing Limited, 2010
70
Technical textile yarns Winding aggregate Card slivers
Carding drum Outlet Spinning aggregate Dust extraction Core feed
2.9 DREF 2000 friction spinner [16].
perforations. The machine can produce S-twisted or Z-twisted yarn, without any mechanical alteration. Yarns of 14.5 s Ne can be produced at production speeds of 250 m/min [17]. DREF 3000 The DREF 3000 friction spinning machine exhibited at ITMA 2003 is the latest model in the series of DREF friction spinning machines. It is designed to produce high-tenacity yarns for flame-resistant protective apparel, upholstery, fibre composites, filters and other technical fabrics. The machine achieves production speeds of up to 250 m/min, as well as reduced costs for yarn preparation and maintenance. The touch-screen operation facilitates handling of production parameters and yarn parameters such as yarn count calculation as well as measurement of length and weight, PLC control and links to other computers. In addition, development continues using the DREF 3000 to produce elastomeric-core yarns [16]. Friction-spun yarns find extensive applications in technical textiles.
2.5
Air-jet spinning
2.5.1 Principle of operation Air-jet spinning works on the principle of false twisting/wrapping that produces so-called ‘fasciated yarns’. Air-jet spun yarn consists of a core of parallel fibres wrapped by surface fibres or binding fibres. These yarns are known as fasciated yarns due to the fact that the wrappers are not continuous [7]. Murata Machinery, Japan, exhibited their first Murata Jet Spinner, the MJS 801, at ATME-international in 1982. The Murata Jet Spinner consists of three zones, namely the drafting zone, the yarn formation zone and the
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
71
yarn take-up zone. A drawn sliver is drafted by a four-roller double-apron drafting system (Fig. 2.10). The drafted ribbon of fibres is subjected to the action of an air-jet in two nozzles, which rotates at a very high rate (about 2 to 3 million rpm). The pressure (intensity) of the air-jet in the first nozzle N1 is lower than that in the second nozzle N2. The air-jet in nozzle N1, therefore, cannot influence the core fibres but can readily grasp the edge fibres projecting from the drafted strand at one end and cause them to be wrapped over the core with only a few turns in the direction opposite to the twist in the core [8, 18]. After emerging from nozzle N2 (the main nozzle, which imparts false twist to the core), the core gets untwisted to become a parallel bundle while the edge fibres are wrapped more intensively over the core. The yarn so formed is withdrawn and wound onto a package. The advantage of Murata jet spinning over the Rotofil process and Toray air-jet spinning is that it uses two air-jets while the latter two processes use a single air-jet. With a single air-jet, the free edge fibres are not wrapped as effectively as with two air-jets. In the MJS system, the use of nozzle N 1 with an air-jet of relatively lower pressure – in addition to the main false twist nozzle N2 – ensures grasping of the edge fibres, which are wrapped with a few turns over the core in a direction opposite to the direction of twist in the core. The false twisted core, while getting untwisted, causes the sheath to get wrapped over it with increased intensity and tightness of wrapping. Due to this effective wrapping, the edge fibres hold the core firmly and contribute substantially to the yarn strength. At present, Murata jet spinning is the most commercially successful air-jet spinning system [18].
Air-jet nozzle N1
Air-jet nozzle N2
2.10 Principle of Murata jet spinner [7].
© Woodhead Publishing Limited, 2010
72
Technical textile yarns
2.5.2 Latest developments in air-jet spinning Murata Twin Spinner, MTS 881 Murata has developed the Twin Spinner with the objective of producing two folded yarns through a short-cut process. In this machine, the width of cots and bottom rollers are increased to accommodate drafting of two slivers simultaneously, without touching each other. The sliver guides are provided in drafting zones to avoid intermingling of the two strands during drafting [18]. The drafted strands are passed through air-jets separately and are given false twist. Finally, the two strands are brought together and wound in parallel onto a single package, which will be used as a precursor package for a two-for-one twister to produce folded yarn. The operation of the Twin Spinner is controlled by ‘Super Spectron’ and ‘IA-3’. When cyclic yarn unevenness exceeds the control standard, the cause is indicated together with the spindle number in trouble. The packages are wound evenly to a desired yarn length (within ±1%) by ‘Yardage Controller’ [19]. With the innovative idea of the MTS system, the winding process can be eliminated, which results in significant saving on floor space and cost, and an astonishing 10 to 20 times increase in productivity as compared to ring spinning. As compared to MJS yarn, the MTS yarn is less stiffer and fabrics made from the latter are relatively softer. Roller jet spinner The Roller Jet Spinning (RJS) system, first exhibited by Murata at ITMA ’95, is a development of the air-jet spinning concept, with the second air-jet nozzle replaced by a pair of ‘balloon rollers’. The system consists of one air-jet nozzle and a pair of balloon rollers. The air vortex inside the nozzle rotates in a direction opposite to the twisting action of the balloon rollers [20]. The Roller Jet Spinner RJS 804 was demonstrated at ITMA ’99. This system is yet to receive commercial acceptance and popularity.
2.6
Vortex spinning
Murata Machinery has developed a new spinning process called ‘Murata Vortex Spinning’, which is different from air-jet (false twist) spinning.
2.6.1 Principle of operation Vortex spinning takes drawn cotton sliver and drafts it to the desired yarn count (fineness) via a four-roller apron drafting system. The drafted fibres are then sucked into a nozzle where a high-speed ‘air vortex’ swirls the fibres around the outside of a hollow stationary spindle (Fig. 2.11). A rotating air
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
73
vortex twists the free fibre ends around the bridge fibres with true twist [21], producing a ring yarn type of structure. This makes it possible to process carded yarns also. The twist is inserted as the fibres swirl around the apex of the spindle before being pulled down a shaft that runs through the middle of the spindle. The productivity of the MVS system comes through its delivery speed and the fact that it spins yarn directly from sliver, rather than roving. The resultant yarn is cleared and wound directly onto a package that can be sold readily by the mill. Vortex spinning with the MVS 851 machine introduced by Murata at the 1997 Osaka International Textile Machinery Show has been impressively demonstrated with regard to its economic potential through spinning a 15tex yarn from 100% cotton at 400 m/min [21]. Murata exhibited its latest model, MVS 861, at ITMA 2003. The characteristics of MVS yarns and fabrics are observed to be comparable to those of ring-spun yarns, i.e., the fabric made from MVS yarn is reported to be as smooth and as soft as that produced from ring-spun yarn. However, MVS requires reasonably good fibre characteristics to achieve these outputs. Fibres must be clean and strong, have a staple length of at least 28 mm and be uniform in length. The production speed is almost independent of yarn count and is in the range of 300–400 m/min. This process is concurrent with rotor spinning and ring spinning in the count range of 12–40 s Ne. Thus with this system, Murata demonstrates a serious alternative to rotor spinning for medium and long staple cotton spinning. The production cost for 40 s Ne vortex yarn, as
Sliver
Vortex air
Spindle
MVS yarn
2.11 Principle of vortex spinning [22].
© Woodhead Publishing Limited, 2010
74
Technical textile yarns
compared to equivalent ring and rotor yarns, is approximately 50% and 60%, respectively. The fully automatic process eliminates all rotating mechanical twist-insertion elements. The flexibility of this technology is significantly higher than that of false twist spinning, and will probably take on the latter. Blended yarns can also be produced without any difficulty. MVS has been hailed as a revolutionary new technology for fasciated yarn production. It appears to have a profound scope for spinning of cotton yarns.
2.6.2 Comparison of MVS with MJS The conventional Murata Jet Spinning (MJS) employs two jets, one of which false-twists the core while the other readily grasps the edge fibres and wraps them in a direction opposite to the direction of twist of the core. The air-jets act on the edge fibres from both sides. The resultant yarn consists of core of twistless and parallel fibres wrapped by the sheath fibres. Murata Vortex Spinning (MVS) with a single jet creates an air-vortex all around, which swirls and twists the free fibres about the bridging fibres, forming a yarn similar to a ring-yarn structure. In air-jet spinning, edge fibres ultimately produce wrapper fibres, and the number of edge fibres depends on the fibres at the outside. On the other hand, in vortex spinning, the fibre separation from the bundle occurs everywhere in the entire outer periphery of the bundle (Fig. 2.12). This results in a higher number of wrapper fibres in the yarn. Both MJS and MVS offer scope to produce core-spun yarns, which find their suitability for production of technical textiles.
2.7
Core yarn spinning
Core yarn spinning is a process for production of core spun yarns. The core spun yarn consists of a central core made up of a filament or an elastane or a bundle of staple fibres covered or wrapped totally by a sheath of staple fibres. The core, which is generally of a strong synthetic filament/fibre,
MJS MVS
2.12 Principle of working of MJS and MVS [23].
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
75
provides desired strength, extension and regularity to the yarn. However, if an elastane is used as core, it provides the desired stretch to the resultant yarn and the fabric. The staple sheath, on the other hand, gives the yarn a spun yarn look, besides acting as a substrate for the application of special chemical finishes. Therefore, core spun yarns are unique in structure and specific to end-use requirements. Core spun yarns can be produced by any one of the methods already described, such as ring spinning, rotor spinning, friction spinning, and air-jet/vortex spinning.
2.7.1 Production of core spun yarns in ring spinning The core yarn can be spun on a conventional ring spinning machine through suitable modification to incorporate a special device for continuous feeding and positioning of the core component. The incomplete core coverage and unsatisfactory strip resistance of these yarns limit their potential end uses. Sawhney et al. [24] have developed an improved method for producing core spun yarns, which is based on a ‘wrap-core-wrap sandwich’ approach, under the name ARS core-spinning system. Figure 2.13 shows a schematic diagram of this new filament-core spinning system. The ringframe is retrofitted with a core stabiliser bar (positioned immediately in front of the front drafting rollers), which has a special groove for the filament-core and a polished surface for the staple wrapper fibres. The two conventionally prepared rovings are kept separated in the drafting zone by roving guides and condensers. Depending on the length of the sheath fibre Cotton rovings
Continuous filament Tension discs Roving condenser Roving spacer Drafting rollers Filament guide Core/wrap spinning system
Spinning ring
Core–sheath yarn 2.13 ARS filament-core spinning system [24].
© Woodhead Publishing Limited, 2010
76
Technical textile yarns
being processed, the spacing between the rovings in the drafting zone may vary from 5 to 10 mm. The filament, under relatively high tension, is fed between the two strands of staple fibres behind the nip of the front drafting rollers such that it is not subjected to any drafting action. As the core along with the fibres emerges from the front roller nip, it is guided into the groove in the core stabiliser bar, where the fibre assembly and yarn formation take place. The twisting action produced in the core by the rotating spindle spins the drafted staple fibres onto the filament-core. The core stabiliser bar with an attached twist control guide prevents the flow of twist to the front roller nip, thereby preventing plying (or barber-poling) of different strands that happens in conventional core spinning process. The spacing between the yarn formation point (on the stabiliser bar) and the front roller nip has to be adjusted in relation to the mean fibre length so that individual fibres migrate independently and spin around the core, leading to greater interlocking between the fibres and the core that results in improved strip resistance. The ARS core-spinning system can be used to produce staple core spun yarns also. The roving for the core component is placed between the two rovings that constitute the covering. All the three rovings are separated in the drafting zone using the roving condenser and spacers. As the drafted strands emerge from the front roller nip, they are drawn through a specially designed gripper device. The device has two flat spiral springs (Fig. 2.14) that guide the fibre strands and act as a gripper for the core strand. One spring has a left-hand spiral and the other a right-hand spiral; the two springs face and touch each other. The tension of one or both of the spiral springs can be adjusted to permit a smooth downward flow of the composite material, but without allowing the yarn twist to migrate above the grip of the two springs, resulting in the production of truly coaxial, strip-resistant and almost totally covered core spun yarn. Sawhney and Ruppenicker [25] have produced core spun yarns on the patented ARS core-spinning system using 100% cotton, fibreglass core, and Dyneema core covered with cotton. The yarns were used to develop special-purpose fabrics, such as flame-retardant fabrics for US army tents, fabrics for fire barriers, fabrics for industrial abrasives and sandpapers, etc. The details of the yarns and fabrics are given in Table 2.2.
2.7.2 Production of core spun yarns in rotor spinning The Rieter company offers an innovative process for the production of rotorspun core yarn known as Rotona®. The elastic and non-elastic rotor-spun core yarns can be produced with the BT 904 rotor spinning machine. It has been reported that the Rotona process for manufacturing rotor-spun core yarns is based on a 30-year-old idea. It has been taken up again by Rieter
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising Core fibre
77
Wrap-fibre (1 or 2 rovings) Roving condenser Roving spacer Drafting rollers
Spinning grippers Bracket
Spinning ring Core/sheath yarn
2.14 Schematic of staple core yarn spinning on a modified ringframe [24].
in response to increasing demand for elastic fabrics and implemented as a result of new technical approaches. The special features of the BT 904 rotor core yarn machine include a filament-core feeding mechanism with the drive easily adjustable by frequency converters up to a 7.0-fold draft, individual sensors and stop device for each filament, modified spinbox, rotor speeds up to 75,000 rpm, delivery speeds up to 150 m/min, IQ Clean® integrated optical yarn clearer system, AMIspin® semi-automatic, electronically monitored piecing system, and yarn connecting unit [26]. Figure 2.15 demonstrates the production of Rotona core spun yarn. The filament enters the spin box through a tube that guides it through the rotor shaft into the centre of the rotor cup. The rotor yarn then wraps around the core. The specially designed technology parts make sure the handling of filament is careful and contact points do not cause any damage. Rotona core yarns in the count range of 5–30 s Ne can be produced from a wide range of raw materials, namely cotton, polyester, viscose as staple fibres, and filaments or elastanes of 10–140 den as core. The machine has a built-in quality monitoring system. Every spinning position is equipped with a filament sensor that stops the spinning process in the case of filament break. The integrated optical yarn clearer IQclean® by
© Woodhead Publishing Limited, 2010
78
Table 2.2 Details of various core-spun yarns and fabrics [25] Dyneema-reinforced yarns and fabrics
Fibreglass-reinforced yarns and fabrics
Polyester-reinforced yarns and fabrics
100% cotton
Fibre-glass 100% cotton core
Polyester/cotton 100% cotton (50/50)
Cotton/Dyneema (90%/10%) Core-wrap
Intimate blend
© Woodhead Publishing Limited, 2010
Warp yarn Count (tex) 42 42 42 33 33 35.8 34.7 Tenacity (g/tex) 15.3 20.1 23.3 14.24 11.45 87 45.9 Weft yarn Count (tex) 39 39 39 45 45 35.8 34.7 Tenacity (g/tex) 14.8 19.2 23.3 12.4 11.91 87 45.9 Fabrics 319 317 325 260 260 264.5 261.7 Grams/m2 (gsm)a Threads/cma 19 ¥ 13 19 ¥ 13 19 ¥ 13 36 ¥ 22 36 ¥ 23 30 ¥ 19 30 ¥ 19 Breaking strength(kg)b 73.6 99.6 114.1 43 36.3 39.6 20.9 Extension at break (%)b 13.9 18.0 20.2 8.5 4.6 20.4 11.9 Tearing strength (kg)b 2.1 3.6 4.6 3.4 3.2 4.32 1.54 Abrasion resistance 212 609 1824 – – – – (cycles)b Char length (cm) 8.4 12.7 11.2 5.5 BELc – – a
Grey state. warp way. c BEL: burnt entire length. b
Technical textile yarns
Property
Advances in yarn spinning and texturising
79
2.15 Rotona process for core yarn production [26].
2.16 Structure of Rotona core spun yarn [26].
Rieter controls thick and thin places, moiré effect and yarn count variation. The yarn connecting unit (YCU) identifies and locates the position of the broken yarn. The operator then prepares the yarn end and knotting takes place automatically. The structure of Rotona yarn (Fig. 2.16) is reported to be stable with the yarn (fibres) wrapped around the filament-core. The yarn exhibits greater regularity and reduced hairiness. It is claimed that the Rotona process with a high production rate of 150 m/min and a bigger package (up to 4 kg) containing longer lengths of knot-free yarn is more economical as compared to production of core spun yarns in ring spinning. In addition, the Rotona process sequence is shorter and requires less floor space, labour and power as against the conventional process of core yarn production. The production capacity of the BT 904 Rotona machines, which have been installed for approximately 2 years, is reported to be around 400–500 tonnes per month. Rotona fabrics are currently produced in a number of large, vertically integrated mills in Europe [26].
© Woodhead Publishing Limited, 2010
80
Technical textile yarns
2.7.3 Production of core spun yarns in friction spinning Friction spinning stands unique in the production of distinct core–sheath type structures. The core spun yarns can be spun on both DREF 2 and DREF 3 machines, including their latest versions DREF 2000 and DREF 3000 respectively. The details of core yarn production are described at length elsewhere [7].
2.7.4 Production of core spun yarns in air-jet/vortex spinning Murata Machinery, Japan, has developed a core yarn manufacturing device for the production of core spun yarns in air-jet spinning. The filament-core, more commonly Lycra or polyurethane, is drafted to 4–6 times by the positive feed rollers, and covered by sheath fibres such as cotton [27]. The yarn has a twistless core wrapped by sheath fibres. The core is truly coaxial and completely covered in vortex core-spun yarns (Fig. 2.17) and friction-spun yarns as against the ring-spun yarns where it exhibits a barber-pole effect. Core-spun yarns find extensive application in the production of technical yarns such as sewing threads, multi-component yarns, tyre-cord yarns, cable yarns, etc., that are used specifically in the development of flame-retardant textiles, automobile textiles, geotextiles, tents, tarpaulins, abrasives, filtration textiles, etc.
2.8
Wrap spinning
2.8.1 Principle of operation As the name suggests, wrap spinning works on the principle of wrapping. The feed stock, generally a drawn sliver, is drafted in a five-roller drafting system (Fig. 2.18). The drafted strand runs through a hollow spindle without
Vortex core yarn
Ring core yarn
2.17 Structures of vortex-spun and ring-spun core yarns [27].
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
81
2.18 Schematic of Parafil wrap spinning [28].
receiving true twist. A continuous filament yarn, unwound from the bobbin on the hollow spindle, is wrapped helically over the drafted strand of fibres, resulting in a wrap spun yarn. The wrap spun yarn therefore consists of a core of essentially twistless and parallel fibres wrapped helically by a continuous filament (Fig. 2.19). These yarns are also known as ‘cover-spun yarns’ or ‘parallel yarns’, abbreviated to ‘PL yarns’ [7, 28], and the method of spinning is also known as ‘hollow-spindle spinning’. Many manufacturers offer different processes of wrap spinning, but the
© Woodhead Publishing Limited, 2010
82
Technical textile yarns
Filament
Staple fibres
2.19 Structure of wrap spun yarn [28].
most commercially successful one is the ‘parafil spinning’ of Spindelfabrik Suessen, Germany. Suessen offers two types of machines, namely [28]: ∑ ∑
Parafil 1000, with medium packages for yarns of 25–100 tex (6–24 s Ne) Parafil 2000, with large packages for yarns of 25–500 tex (1–24 s Ne).
These machines use four- or five-roller drafting arrangements, depending on the raw material to be processed. The Parafil system permits maximum spindle speeds up to 35,000 rpm, and the hollow spindle is designed as a false twisting assembly. The fibre strand does not pass directly after entering the spindle vertically; instead, shortly after entering the spindle, the strand is led out again and back around the spindle with a wrap of about one-quarter of the spindle periphery. In this way, as the spindle rotates, the strand is provided with twist between the drafting arrangement and the head of the hollow spindle. These turns of twist are cancelled out again in the spindle head in accordance with the false twist principle. This twist prevents the strand from falling apart in the length prior to wrapping with filament. Wrapspun yarns are used in the production of furnishings, pile fabrics, upholstery and technical textiles.
2.9
Developing particular yarn properties
There have been many developments in the properties of yarns produced by the popular spinning systems discussed in Sections 2.2–2.8. Such developments
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
83
can be considered under three main headings, namely the role of the raw materials used to build up the yarn, the role of the process parameters that influence the fibre integration in the yarn body and its structure, and ultimately the engineering of yarn for specific applications. All three aspects are discussed below.
2.9.1 Role of raw materials In general, fibres and filaments constitute the raw materials for the manufacture of a yarn. The utility of different types of these fibrous raw materials varies from one spinning system to another and depends upon the specific end uses of the yarn. Table 2.3 highlights the range of fibrous raw materials used on various spinning systems to develop the requisite yarn properties for specific applications. In order to engineer yarns with requisite properties, the various spinning systems prefer the fibrous materials with their properties in order of importance as depicted in Table 2.4.
2.9.2 Role of process parameters It is well known that the process parameters vary from one spinning technology to another. The various process parameters in any spinning system play a decisive role in influencing the yarn structure and hence the properties. Thus Table 2.3 Raw materials used for various spinning technologies Spinning system
Type of raw materials used
Ring spinning (conventional and compact)
All short and medium staple fibres such as cotton, acrylic, polyester, viscose, modal, lyocel, and their blends
Rotor spinning
All short and medium staple fibres such as cotton, acrylic, polyester, viscose and their blends
Friction spinning
Core: (i) staple fibres such as cotton, acrylic, polyester, viscose, kevlar, nomex, trevira; (ii) mono- or multifilaments such as polyester, nylon, polypropylene, aramids, carbon, glass, metallic wires, elastane, etc. Sheath: all staple fibres as in core
Air-jet/vortex spinning
Core: staple fibres such as polyester, viscose, cotton and their blends and elastane Sheath: all staple fibres as in core
Core yarn spinning
Core: all staple fibres, mono- or multifilaments, metallic wires, elastane, etc. Sheath: all staple fibres
Wrap spinning
Core: all staple fibres Sheath: mono- or multifilament
© Woodhead Publishing Limited, 2010
84
Technical textile yarns
Table 2.4 Fibre properties for various spinning technologies Spinning system Order of importance of fibre propertiesa
Ring spinning Rotor spinning Friction spinning Air-jet spinning/ vortex spinning Core yarn spinning Wrap spinning a
1
2
3
4
5
Length Strength Friction Fineness
Fineness Fineness Strength Length
Strength Cleanliness Fineness Cleanliness
Friction Length Length Strength
Cleanliness Friction Cleanliness Friction
Fineness Length
Length Fineness
Strength Strength
Friction Friction
Cleanliness Cleanliness
1 = highest order, to 5 = lowest order.
Table 2.5 Specific applications of yarns spun on popular spinning technologies Yarn type
Structure
Specific applications
Ring-spun yarn Homogeneous Apparel, knitted goods, furnishings, high(conventional/compact) quality towels, lingerie, sewing threads Rotor-spun yarn
Bipartite
Denims, jeans, outer garments, terry towels, knitwear, household textiles
Friction-spun yarns
Core–sheath
Technical textiles – fire-retardant textiles, cut resistant fabrics, geotextiles, mobile textiles, composites, conveyors, filters, hoses, ropes, upholstery
Air-jet/vortex yarns
Fasciated
Apparel, curtains, furnishings, hosiery
Core-spun yarns
Core–sheath
Stretch yarns for hosiery, inner garments, medical bandages, sewing threads, sportswear, swimwear and industrial textiles
Wrap-spun yarns
Core–wrapper Cut pile fabrics, blankets, carpets, velours, velvets, furnishings
the important process parameters have to be optimised for the production of the desired quality of yarn. The role of process parameters in various spinning technologies is described in detail elsewhere [7].
2.9.3 Specific applications The development of yarn properties is largely influenced by the specific application(s) of that particular yarn. Hence yarn engineering is of the utmost importance at the present time. Table 2.5 highlights the specific applications of different yarn structures produced using popular spinning technologies. Friction-spun yarns with wide-ranging technical specifications find extensive applications in technical and industrial textiles. Table 2.6 highlights some of the unique technical applications of friction-spun yarns [29].
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
85
Table 2.6 Unique technical applications of friction-spun yarns [29] Yarn type
Yarn count
Core and sheath materials
Properties
Hybrid yarns for 250 tex Core: glass filament reinforced plastics Sheath: polyester
Zero-twisted reinforced filament gives best strength, definable fibre matrix proportion
Hybrid yarns 833 tex Core: none for liquid filter Sheath: pp fibres cartridges
Huddle fibre arrangement for best filter action
Hybrid yarns for 196 tex Core: pp tape secondary carpet Sheath: pp fibres backings (uv stabilised)
Good non-rotting properties, high chemical resistance and good dimensional stability
Hybrid yarns for 125 tex Core: glass filament Flame retardant and high heatproof woven Sheath: para aramid temperature resistance and knitted fabrics Hybrid yarns for 100 tex Core: metallic wire High cut resistance and cutproof woven Sheath: para aramid good dimensional stability and knitted fabrics Hybrid yarns for 250 tex Core: glass filament High yarn volume and good asbestos substitutes Sheath: para temperature resistance aramid/preox fibres
2.10
Yarn texturising: technologies, developments and applications
The word texture refers to the characteristic appearance of a surface having a tactile quality. Texturising is the process of formation of crimp, loops, coils or crinkles in filaments to impart special textures. The texturising process was originally applied to artificial fibres to reduce such characteristics as transparency, slipperiness, and the possibility of pilling (formation of small fibre tangles on a fabric surface). Texturising renders yarns more opaque, improves appearance and texture, and increases warmth and absorbency. Thus texturising is increasingly important in textile production, not only in yarns for weaving and knitting fashion products, but also for carpets, furnishing fabrics and a variety of technical textiles [30].
2.10.1 Prominent yarn texturising technologies Among several texturising methods, false twist texturising and air-jet texturising are very prominent technologies, which are briefly discussed here.
© Woodhead Publishing Limited, 2010
86
Technical textile yarns
False twist texturising False twist texturising is a popular method of texturising filament yarns that works on the principle of twist–set–detwist. In this process, a flat filament yarn is twisted, set and untwisted to impart required crimp, stretch and elasticity. When filament yarns made from thermoplastic materials are heat-set in a twisted condition, the deformation of the filaments is ‘memorised’ and the yarn acquires greater bulk. Hence false twist texturising produces very voluminous and highly elastic yarns that find their utility in fashion textiles, tights/stockings and other lingerie as well as in technical end-uses. Air-jet texturising In air-jet texturising, thermoplastic or non-thermoplastic filament yarns are overfed into an air-jet nozzle, wherein the individual filaments with the action of the air-jet get tangled to produce the desired texture. The crimp comes into being through the retraction that happens after the air-mechanical deformation and these yarns exhibit maximum level of bulk as compared to other texturised yarns. With post-thermosetting in a heater the yarn builds up higher crimp stability and reduced shrinkage. A natural, cotton-like look is representative of such yarns. Air-jet texturised yarns are extensively used for home textiles, sportswear for technical applications.
2.10.2 Developments in yarn texturising Developments in false-twist texturising Today, the state of the art in synthetic fibre is in fabric engineering with predefined functions to produce wide-ranging products in accordance with recent fashion trends. Within a single garment there are areas where different yarns are employed for their specific properties. In recognition of these facts, Research Innovation in Textile Machinery (RITM) invested in research to develop new yarn processes, high precision machine components and the never-ending scientific research on surfaces and coatings. For high performance false-twist texturising, RITM has developed a modern false-twist texturising machine, the Goal 1210, with the following features [30]: ∑
∑
Improved thread path with ergonomic creel: Fixed and rotary creels provide well-adapted solutions for low space requirements whilst feeding partially oriented yarn at high speed for standard and delicate low count yarns and microfilaments. Easy threading: The GOAL 1210 FLEX features semiautomatic threading with a pneumatically operated sledge for the primary heater, which presents the yarn to the heater entry.
© Woodhead Publishing Limited, 2010
Advances in yarn spinning and texturising
87
∑
Straight yarn path system: RITM has taken the concept of the straight yarn path and applied it to all GOAL 1210 machines. This avoids contact angles, which the delicate yarns cannot stand. The benefit of minimum yarn contact in the texturising zone is that maximum twist passes across the heater, ensuring high bulk levels at maximum yarn tenacity. ∑ False-twist motor spindle: Each false-twist unit is driven by an individual motor and controlled by a common inverter. This ensures that all spindles are controlled at a common rotational speed and deviations between spindles are within acceptable limits for international quality standards. ∑ Contact heater: Vapour phase contact heaters are used for the whole RITM machine range. This system is familiar to all texturising companies and provides a consistent temperature profile across all machine positions, ensuring consistent product quality. ∑ Setting zone: In apparel, the excellent bulk, cover and textile hand that are achieved by the false-twist texturising process are highly desirable. The required bulk level is set into the yarn by overfeeding it into the second heater. This heater also uses the vapour-phase thermosyphon principle. The regular temperature profile ensures consistent treatment from position to position to maintain the consistent bulk achieved during texturising. ∑ Package build: The take-up package winding on RITM’s texturising machinery was developed to create packages with equal density inside and outside and regular density from position to position. The packages are used directly in the next step of operation or can go to yarn dye operations. Following the different technical yarn requirements of each textile application from hosiery to upholstery, from medium count to superfine count, from coarsest to finest micro denier per filament, RITM’s texturising machine range is able to work in the whole range of today’s existing polymer types such as PES, PBT, PTT, PA 6, PA 66, PLA and PP, which can be widely used in woven and knitted fabrics, home furnishings and upholstery [30]. Developments in air-jet texturising In the air-jet texturising process, the compressed air energy must be optimised both to texturise the yarn, and to forward it through the jet. The RITM machines are designed to maximise the available energy, for the benefit of texturising performance. The downward thread path uses the assistance of gravity to feed the yarn through the jet. Prior to the jet, any drag on the yarn due to contact with machine components or changes in direction over ceramic guides is to be avoided. To achieve this, the jet-feed rollers are positioned, relative to the jet, so that no additional guides are required to bring the yarn © Woodhead Publishing Limited, 2010
88
Technical textile yarns
to the jet, at the angle recommended by the jet manufacturer. By optimising the process, RITM has achieved significant increase in speed [30]. The AT 8 is an independent-sided, multi-position, line shaft-driven machine of up to nine sections, each with 16 operating positions (eight per side), that offers a perfect process for production of high quality air-jet texturised yarn. The AT 8 has optimum spindle density, giving good ergonomics and maximising process economics. It is best suited to producing yarns in the count range up to 800 dtex where it is well established around the world for apparel production. The shafts are driven by variable-speed AC motors controlled by frequency inverters. All process set points are entered into a central computer, which also monitors machine functions. This machine may be equipped to process fully drawn yarn (FDY) or may be fitted with a draw zone to enable the processing of low oriented yarn (LOY) and partially oriented yarn (POY). The stabilising heater and output feed are automatically threaded, thereby reducing operator load [30]. Air-jet texturised yarns find extensive applications in hosiery for next-toskin wear, sportswear, lingerie, linings, etc. Bulked continuous filament process The bulked continuous filament process, commonly known as the BCF process as shown in Fig. 2.20, has gained prominence in the production of texturised filaments that give rise to bulked staple fibres for the fast-growing fibre-fill and carpet industry. In this process, the crimp in the flat filament yarn is produced largely by asymmetrical quenching or by bi-component Spinning
LD
Drawing
Texturising
Jet type Jet design No. of threads
Interlacing effect
LD32 Open/close 1, 2, 3, 4, 5, 6
Standard tangling
LD4 Open/close 1, 2, 3, 4
High-speed tangling
LD5 Open/close 1
Titre range (dtex)
Cooling Winding
2.20 Schematic of BCF process [31].
© Woodhead Publishing Limited, 2010
Tangling, commingling 650–10000
Advances in yarn spinning and texturising
89
conjugated spinning. The bi-component conjugated fibres are produced either by spinning two polymers differing only in molecular chain length or by spinning two different polymers or copolymers. The crimp in these fibres results from differential shrinkage between the two polymers or their bi-component structure when the resultant fibre is exposed to heat. The low cohesion and high bulk of BCF yarns or cut staple fibres render them preferable in articles such as pillows and furniture back cushions, since it improves refluffability. These yarns also find extensive applications in the manufacture of a wide range of carpets [31].
2.10.3 Technical applications of texturised yarns Texturised yarns are widely applied in technical and semi-technical textile products. The versatility of synthetic fibres such as polyester, nylon and polypropylene renders them suitable for use in texturised form in numerous ways as highlighted below: ∑ ∑ ∑ ∑ ∑ ∑ ∑ ∑
texturised microfilament yarns for medical and surgical textiles texturised microfilament yarns for the cleaning sector texturised filament yarns for print base including digital print processes texturised filament yarns for processing in the ribbon industry (decorative ribbons, cable sheathing, etc.) texturised antimicrobial yarns for medicine and hygiene textiles texturised filament yarns as the basis for transdermal patches and bandages texturised filament yarns as core for industrial ropes, cords, hoses, etc. bulked continuous filament yarns for heat bonding, e.g. for insulation and filtration materials, carpet backings, and carpets in the automotive sector.
2.11
Future trends
There has been considerable innovation in yarn spinning processes. Electrospinning and single-step spinning have started making inroads. Future trends include development of spinning technologies for production of nano-yarns, speciality bi-component yarns and intelligent yarns, which will be used to develop smart, intelligent and functional textiles.
2.12
References
1. Stalder H (2000), New spinning process – ComforSpin, Melliand International, 6, 22–25.
© Woodhead Publishing Limited, 2010
90
Technical textile yarns
2. Ishtiaque S M, Salhotra K R and Kumar A (2003), Compact spinning: a comprehensive review, Asian Text. J., no. 6, 74–82. 3. www.rieter.com 4. www.suessen.com 5. http://www.textileindustries.com/News.htm?CD=2249&ID=6482 6. http://www.ptj.com.pk/Web%202004/02-2004/rotocraft.html 7. Gowda R V M (2006), New Spinning Systems, 2nd edition, NCUTE, Ministry of Textiles, Government of India. 8. Klein W (1995), New Spinning Systems, vol. 5, Short Staple Spinning Series, Manual of Textile Technology, The Textile Institute International, Manchester, UK. 9. Autocoro 288 Rotor Spinner (2000): customer information brochure, Suessen, Germany. 10. Elsassar N, Braun U and Gries T (2001), Determining optimum strategies for foreign fibre control in spinning, Melliand International, 7, 109–112. 11. Autocoro 360 Rotor Spinner (2004): customer information brochure, Schalfhorst/ Saurer Group, Germany. 12. Eicher E (2001), New R 40 rotor spinning machine – the latest in machine automation, Text. Mag., no. 12, 25–27. 13. Fehrer E (1987), Friction spinning: the state of the art, Text. Month., no. 9, 115– 116. 14. Gsteu M (1982), A spinning process makes the grade, Int. Text. Bull., Spinning, no. 1, 65–82. 15. Fehrer E (1986), Friction spinning: the inventor’s analysis, Text. Month., no. 12, 31–34. 16. www. fehereag.com 17. Ishtiaque S M (1999), Spinner’s attraction at ITMA’99, Asian Text. J., no. 10, 27–32. 18. Basu A (1997), Progress in air-jet spinning, Text. Progress, 29, no. 3. 19. Murata Twin Spinner (2004): customer information brochure, Murata Machinery Ltd, Japan. 20. Chang L and Wang X (2001), The hairiness features of new yarns, Text. Asia, no. 5, 33–35. 21. Artzt P (1999), Short staple spinning on the way to new yarn structures and better raw material utilization, Int. Text. Bull., no. 4, 16–23. 22. http://www.thrc-crhit.org/en/thrcnews/futurtexarchives/2002 23. Oxenham W (2001), Fasciated yarns – a revolutionary development? J. Text. Apparel Tech. Mgmt, 1, issue 2. 24. Sawhney A P S, Robert K Q, Ruppenicker G F, and Kimmel L B (1992), Improved method of producing a cotton covered/polyester staple-core yarn on a ring spinning frame, Text. Res. J., 62, no. 1, 21–25. 25. Sawhney A P S and Ruppenicker G F (1997), Special purpose fabrics made with core-spun yarns, Indian J. Fibre Text. Res., 22, 246–254. 26. www.rotona.com 27. Core Yarn Spinning Device (2004): customer information brochure, Murata Machinery Ltd, Japan. 28. Parafil Wrap Spinning Machines (2002): customer information pamphlet, Spindelfabrik Suessen, Germany. 29. http://www.fischerwolle.com 30. www.ritm-fr.com 31. http://www.patentstorm.us/patents/6492020/description.html © Woodhead Publishing Limited, 2010
3
Modification of textile yarn structures for functional applications A. D a s, Indian Institute of Technology, Delhi, India
Abstract: This chapter discusses some of the novel processes of structural modifications, namely bulking, incorporation of micro-pores, twistless and hollow fibrous assemblies, of staple fibre yarns. By modifying the yarn structure the thermophysiological comfort characteristics can be improved by improving the transmission characteristics of heat, moisture and air through the fabric, and the tactile comfort can be improved by proper rearrangements of fibres in yarns and fabrics. The impacts of the structural modifications on characteristics of yarns and fabrics are discussed in detail. Key words: bulk yarn, micro-porous yarn, twistless yarn, hollow yarn, comfort, thermal transmission, moisture transmission.
3.1
Introduction
Different types of staple fibre yarn making processes not only produce different yarn structures but the differences are reflected in the performance of fabrics made from them. Even a staple fibre yarn from a particular spinning process shows altogether different characteristics if the yarn structure is changed. This, in turn, provides more flexibility and more options for textile engineers to change the functionalities of the clothing by changing the yarn structure only. There are various ways of changing the yarn structures, namely by introducing bulk within the yarn, incorporating micro-pores within the yarn structure, removal of one component fibre, chemical treatment, texturing of staple yarns and so on. The fibre packing coefficient plays a significant role through the volume fraction of air in the yarn. The air permeability and thermal conductivity of the fabric depend on the passage of heat, moisture and air through the fabric, which have direct bearing on comfort. So, by changing the packing coefficient of the yarn the transmission characteristics of the fabric, such as air permeability, water vapour transmission rate, thermal conductivity and thermal resistance, can be controlled. The bulking of yarn produces voluminous textiles containing large amounts of air, so that even when they are very light they show very good thermal insulating properties as well as a fuller and agreeable handle. High bulk yarn is produced by shrinkage or contraction of one of its fibre components. Yarn with micro-pores can be 91 © Woodhead Publishing Limited, 2010
92
Technical textile yarns
produced by removal of one component from an intimately blended yarn structure. Friction spun yarn is not being used for apparel due to its harsh feel in spite of its many other positive attributes. This harsh feel is due to the wrapper fibres of the sheath which wrap the core to give adequate strength. The harshness can be totally eliminated by structural modification of friction spun yarns. Also, speciality yarn structures, namely twistless or hollow, can be produced with core-sheath type friction spun yarns. Some of the novel processes of structural modification of staple fibre yarns are discussed in this section. Also, the characteristics of these yarns and fabrics made from these yarns are discussed.
3.2
Modifying textile yarn structures by bulking
The bulking of yarn gives a voluminous textile product having good thermal insulation properties as well as a fuller and agreeable handle. Bulked yarns from cotton–synthetic fibre blends are expected to be in good demand for manufacturing diversified products such as apparel including woven and knitted clothing. The principal economic merit of high bulk yarns is the lowering of product weight and consequent saving in textile raw materials. In very low wool blends, the high bulk associated with wool provides the desired wool quality handle and luxurious look to the finished products. On the other hand, the very open structure of these yarns involves an increased risk of pilling and ready soiling, particularly in knitted fabrics, which are typical of synthetics.
3.2.1 Principles of bulked yarn production There are several factors which influence the volume of a yarn, such as the type of its constituent fibres, their number and size, cross-sectional shape, length, the yarn twist, etc. However, the principal factor in yarn bulkiness is the geometric shape and arrangement of the fibres in the yarn. It is known from experience that wool yarns are bulkier than flax or cotton yarns of the same metric count. This is evidently because of the merit of the natural crimp, thickness and length of wool fibres. Though most of the crimp is flattened in the spinning process, it develops again in the dyeing and steaming processes. Any hot wet processing will restore the wool crimp and increase the bulkiness of the yarn. The basic means of developing high bulk yarn is by shrinkage or contraction of one of its fibre components. The process is based on the differential shrinking power of various fibres. In order to obtain the desired bulking effect the difference in the shrinking power of the fibres involved should not be less than 20% [1]. It is, therefore, important that the non-shrinkable fibres
© Woodhead Publishing Limited, 2010
Modification of textile yarn structures
93
be stabilized perfectly so as not to shrink at all during the heat treatment processes. On the other hand, the shrinkable fibre component must have a shrinking power of at least 20%. Figure 3.1 shows a schematic diagram of the staple fibre yarn bulking process. The shrinkable (thinner line) and non-shrinkable (thicker line) staple fibres are blended intimately (Fig. 3.1(a)) in the spinning stage. Both fibre components are mixed uniformly in a certain blend ratio and are spun conventionally into yarn (Fig. 3.1(b)). It can be observed from this diagram that the heat provokes contraction of the shrinkable component in the yarn, which migrates to the centre of the yarn (Fig. 3.1(c)). The migration of the contracted fibres to the centre of the yarn is initiated by their considerable shortening. It is known from the theory of yarn structure that the longest fibres assume their position on the surface of the yarn or at the biggest radius, while the shorter fibres tend to move towards the centre of the yarn where they may form theoretically the axis of the yarn. Owing to the shrinkage of the shrinkable fibre components and to their consequent spontaneous migration towards the centre of the yarn, the nonshrinkable fibres will be pushed to the yarn surface where they will form lofty crinkles and loops, thus making the yarn much bulkier. The size of the bulking effect is determined by the difference in the total shrinking power of the fibres in the blend, their relaxation power, the blending ratio and the arrangement of the fibres in the yarn, i.e. by the twist, fibre length, spinning technique, twisting technique, etc. Usually about 40–50% of unrelaxed fibres are blended with 50–60% of pre-relaxed fibres to obtain the best compromise between bulk on the one hand, and shrinkage, strength and elongation at break on the other [2]. The bulkiness increases with increasing content of shrinkable fibres up to 40–50% of the shrinkable component share. In the case of finer fibres (2 to 6 denier) the above proportion is up to a 40% content, and with coarser fibres (6 to 10 denier) it is up to 50% [3]. Any further increase of the shrinkable fibre content does not increase the bulkiness of the yarn, because the number of
(a)
(b)
3.1 Staple fibre yarn bulking process.
© Woodhead Publishing Limited, 2010
(c)
94
Technical textile yarns
non-shrinkable fibres, which are in fact responsible for the bulk increase, diminishes. It can be said that while the shrinkable fibres provoke the increase in bulk, the non-shrinkable fibres actually make it. The most popular yarns produced with the above technique are the acrylic bulk yarns. The shrinking power is imparted to acrylic fibres in the form of tow by hot stretching on a tow-to-top converter machine. It is, however, possible to use to advantage the shrinking power of other artificial fibres such as PVC or polyester. One of the newer developments is bulk yarns made of polyester fibres. This is, in fact, a modified polyester fibre, which due to an added component has acquired the desired shrinking power in a hot environment. The non-shrinkable component may be natural or artificial fibres whose shrinkage lies below 1%. The shrinkable and non-shrinkable fibre blended yarns can be processed by any of the following three techniques to develop high bulk in the final products: ∑
The bulk is developed in the yarn form, usually in hank form, and the bulked yarn is then converted into knitted and woven textile products. ∑ The blended pre-bulked yarn is processed by conveniently adapted methods into knitted and woven fabrics and the bulk is developed in fabric form (in the course of the dyeing process). ∑ The blended pre-bulked yarn is processed by conveniently adapted methods into knitted or woven piece goods or semi-products and the final bulk is developed in piece good form. Each of these techniques has its advantages and drawbacks. The technically most exacting is the production of textile goods of high bulk yarns which were shrunk in hank form. The other two techniques are economically attractive but from the viewpoint of quality they do not always give full satisfaction, with the exception perhaps of middle-wear produced on full-fashioned knitting machines, jerseys and ladies’ dress goods [3].
3.2.2 Bulking of ring spun yarns The bulked yarns produced by shrinkage of one fibre component in the yarn differ from other yarns not only in structure but also in their bulk, mechanical and surface properties. The properties of fabrics produced from these yarns are affected by such yarn properties as well as by their fabric construction parameters. The properties of fabrics made of bulked yarns are different from those of normal yarn fabrics in all respects. It is known that bulked yarns are different from normal ring yarns in the free state; this affects the fabric structure and this is reflected in the behaviour of the fabrics. The bulking of yarn gives a voluminous textile product having good thermal insulating properties as well as a fuller, agreeable handle. The properties of fabrics
© Woodhead Publishing Limited, 2010
Modification of textile yarn structures
95
produced from these yarns are affected by such yarn properties as well as by their fabric constructional parameters. Yarn characteristics The presence of shrinkable fibre in the blend results in significant shrinkage in the yarn. The increase in yarn twist results in an increase in yarn shrinkage; this may be due to a higher inter-fibre contact force at higher twist levels causing reduction in slippage between fibres during shrinkage of the shrinkable component and leading to an increase in effective yarn shrinkage. The bulking treatment increases the diameter of the yarn as well as the specific volume of the yarn significantly. In general, the tenacity of yarn increases after bulking. The effective yarn twist per unit length increases after the bulking process, which may be one of the causes of increased tenacity after bulking. Another possible cause may be the removal of natural oils, fats and waxes during the boiling treatment, which possibly increases the inter-fibre friction for cotton/nonshrinkable acrylic blended normal yarns [4]. The breaking extension after bulking increases tremendously [5]. This is mainly due to the shrinkage of the yarn and the buckling of the cotton component during the bulking treatment. More shrinkable acrylic fibres in the blend tend to have more yarn shrinkage and result in a high breaking extension. The initial modulus of blended yarn before bulking is higher than that of 100% cotton yarn for the same count, but after bulking it is reduced. As the specific volume of the yarn increases due to buckling of the cotton fibres, the yarn becomes more pliable in its initial zone of the tensile curve. Thus bulked yarns initially extend very easily. The bulking treatment reduces the flexural rigidity of yarns significantly, since it causes disorientation of the structure of the yarn which results in lowering of the yarn flexural rigidity. The wicking height of bulked yarn is higher than that of the 100% cotton yarn sample, because after bulking more capillary space is created within the yarn. Coarser count yarns give more wicking height than finer ones, which may be due to the presence of more capillary spaces [6]. Fabric characteristics In a study by Das et al. [7], bulking treatment reduced the breaking load of all the fabric samples considerably, and the 100% cotton fabric showed a much higher breaking load. The breaking extension of fabrics produced from bulked yarns is more than that of 100% cotton fabric. The initial moduli of bulked fabrics are substantially reduced due to bulking. The crease recovery angle of fabric with bulked yarn is, in general, higher than that of 100% cotton fabric. Fabrics made of bulked yarns show higher abrasion resistance
© Woodhead Publishing Limited, 2010
96
Technical textile yarns
than 100% cotton fabric. Bulked yarns are loose in structure and can flex easily during abrasion and thus absorb more abrasion energy than compact fabrics. Also, the presence of an acrylic component in bulked yarns results in higher abrasion resistance. The bending rigidity of fabrics made of bulked yarns is lower, due to the reduction in the compactness of the yarn assembly after bulking, which helps to give easier movement of the individual fibres in the bulked weft yarns during bending or flexing of the fabric. Bulked yarn fabrics show lower compressional energy and better recovery than 100% cotton fabrics. Bulked yarn fabrics also show lower thermal conductivity than 100% cotton fabrics, which may be attributed to the very bulky structure of the weft acting as an insulating medium, trapping air in the loose fibrous assembly spaces and not allowing the heat of the inner layer to be transmitted to the outer layer. Moisture vapour transmission (MVT) is an important parameter in evaluating the comfort characteristics of a fabric, as it represents the ability to transfer perspiration from the body. The moisture vapour transmission rate (MVTR) values of bulked yarn fabrics are higher than that of 100% cotton fabric. Since yarn structure plays an important role in the transmission of water vapour, the open structure of bulked yarn has a better cover factor, which allows water vapour to be transferred from inside to outside through diffusion. The wicking rate is lower in bulked yarn fabrics than in normal fabric. Since the pores in bulked yarns are distributed in a random fashion, there is no proper channel or capillary for the water to pass through, so the pores have the capability of holding the water inside, which reduces the transmission rate.
3.2.3 Bulking of yarns of different spinning technologies In a study carried out by Das and Mal [8], different spinning technologies with different proportions of shrinkable fibre core in the core-sheath of DREF-III yarns showed a significant impact on various properties of cotton–acrylic blended bulked yarns and fabrics. For all the yarns, after boiling treatment, there was a lengthwise shrinkage and an increase in specific volume. The percent shrinkage of ring and rotor yarns was almost the same, whereas the DREF-II yarn showed less shrinkage [8]. In Group A, cotton–acrylic intimate-blended yarns were produced in three different spinning systems (ring, rotor and DREF-II). In Group B, cotton–shrinkable acrylic core-sheath type yarns were made from the DREF-III system by changing the shrinkable acrylic fibre percentage in the core. Cotton fibre was used in the sheath. The following were the proportions used: ∑ ∑
50% acrylic fibre in core and 50% cotton in sheath 60% acrylic fibre in core and 40% cotton in sheath
© Woodhead Publishing Limited, 2010
Modification of textile yarn structures
∑ ∑
97
70% acrylic fibre in core and 30% cotton in sheath 100% cotton fibre (60% core in core-sheath structure).
Yarn characteristics It is observed that in all the yarns, the general trend is that after boiling treatment there is a lengthwise shrinkage of yarns and the specific volume also increases. This indicates that there is increase in bulk of all the yarns, although the extent is different for different yarns. The relative shrinkage of the ring and rotor yarns is almost the same whereas the DREF-II yarn shows less shrinkage [8]. The specific volume of ring spun yarns before bulking is lowest, followed by the rotor yarn, with the DREF-II yarn showing the highest specific volume (Fig. 3.2). But in the case of ring spun yarn the percentage increase in specific volume is maximum among the three spinning systems. This may be due to the fact that in ring spun yarns the fibres are aligned in a certain helical fashion along the axis of the yarn, which in turn helps in bulking of the yarn structure during shrinkage of shrinkable-acrylic yarn. In case of core-sheath type DREF-III yarn (Group B), with the increase in the proportion of shrinkable acrylic core in the yarn from 50% to 60%, the yarn shrinkage increases marginally but after that there is no further change. But as far as the percentage increase in specific volume is concerned, initially there is a steep increase when the proportion of shrinkable acrylic core in the yarn increases from 50% to 60%, but after that it drops as the proportion of shrinkable acrylic core in the yarn increases from 60% to 70% (Fig. 3.3) [8]. The initial increase in specific volume is mainly due to an increase in the bulking force as a result of a higher proportion of shrinkable acrylic core, but then as the shrinkable acrylic core increases the cotton sheath component, which is the buckling component to develop bulk in the yarn, reduces and this results in less bulking of the yarn. Moreover, as the cotton
Specific volume (cm3/g)
4
Before bulking After bulking
3.5 3 2.5 2 1.5 1 0.5 0
Ring
Rotor Spinning system
DREF
3.2 Change of specific volume after bulking of yarns of different spinning technologies.
© Woodhead Publishing Limited, 2010
98
Technical textile yarns
Specific volume (cm3/g)
3.5 Before bulking After bulking
3 2.5 2 1.5 1 0.5 0
50%
60% 70% 100% cotton % Shrinkable acrylic in core of dref-III yarn
3.3 Change of specific volume after bulking of core-sheath yarn. 12
Before bulking After bulking
Tenacity (g/tex)
10 8 6 4 2 0
Ring
Rotor Spinning system
DREF-II
3.4 Change of tenacity after bulking of yarns of different spinning technologies.
component reduces it will offer less resistance in shrinkage, thus resulting in a reduction in bulkiness. It can be observed from Fig. 3.4 that the tenacity of all the yarns of Group A increases after bulking, whereas in case of core-sheath type DREF-III yarns (Group B yarns) there is a significant drop in tenacity (Fig. 3.5). The increase in tenacity after the bulking treatment may be due to the shrinkable acrylic fibres gripping the fibre strands more tightly, leading to increased inter-fibre friction and resulting in resistance to inter-fibre slippage. It also increases the effective twist per unit length of the yarn. The drop in tenacity of DREF-III yarns may be due to shrinkable acrylic fibres present in the core shrinking during heat treatment, and the maximum strength of core-sheath type DREF-III yarn depends on the parallel core fibres and proper gripping of the sheath fibres which bind the core fibres. The shrinkage of the core fibres results in disorientation of the structure as a whole, and the binding strength of the sheath fibres also decreases, resulting in a decrease in yarn strength.
© Woodhead Publishing Limited, 2010
% Decrease in strength
Modification of textile yarn structures
99
56 54 52 50 48 46
50% 60% 70% % Shrinkable acrylic in core of Dref-III yarn
3.5 Change of tenacity after bulking of core-sheath yarn.
The flexural rigidity of the yarns reduces after bulking treatment, due to disorientation of the structure of the yarn during shrinkage of the acrylic component. The compressibility of all the yarns increases after bulking, mainly because during bulking treatment the specific volume of all the yarns increases, which results in the creation of air spaces inside the yarn structure, leading to increase in compressibility. The percentage recovery of all the yarns after bulking increases, mainly due to higher recovery of buckled cotton fibres in bulked yarns [8]. Fabric characteristics The bulking treatment reduces the breaking load of all the fabric samples considerably, and the 100% cotton fabrics show a much higher breaking load than the corresponding cotton–acrylic blended bulked fabrics. This trend is true for all the yarn technologies. This may be due to the fact that during bulking treatment the yarn shrinks, and the shrinkage behaviour of yarns is not uniform, i.e. the levels of shrinkage of yarns are not the same. So, during fabric tensile testing the breaking extension of individual yarns varies, resulting in unequal load sharing between the yarns making up the fabric. As a result, the yarns break at different times, resulting in a lower breaking load of the overall fabric [9]. The breaking load of fabrics from bulked yarns is lower than that of 100% cotton reference DREF-III yarn fabric, and the breaking elongation of these bulked yarn fabrics is much higher than that of the reference 100% cotton DREF-III yarn fabric. The higher breaking elongation of bulked yarn fabrics is mainly due to shrinkage of the yarns during the bulking treatment, and the drop in breaking load is mainly due to unequal load sharing of the component yarns and fibres. Fabrics made of bulked yarns in weft show higher abrasion resistance than the corresponding 100% yarn cotton fabrics. Bulked yarns are loose in structure and can flex easily during abrasion, thus absorbing more abrasion energy than normal yarn fabrics. The crease recovery angle (CRA) and the compression of fabrics made from bulked yarns are higher than those of the
© Woodhead Publishing Limited, 2010
100
Technical textile yarns
corresponding 100% cotton yarn fabrics. These trends are valid for yarns made from all the different technologies [9]. All the fabrics from bulked yarns show less air permeability than the corresponding 100% cotton fabrics. This is mainly due to the greater diameter of bulked yarns as compared to 100% cotton yarn, which results in less interyarn space. Bulked yarn fabrics also show higher thermal resistivity than the corresponding 100% cotton fabric, which may be attributed to the very bulky structure of the weft which works as an insulating medium. The MVTR values and the vertical and horizontal wicking of fabrics from bulked yarns are greater than those of the corresponding 100% cotton yarn fabrics [9].
3.3
Modification of textile yarn structures by incorporating micro-pores
Structural modification of yarns can also be carried out by incorporating additional micro-pores inside the yarn body in addition to the existing micropores. This increases the porosity of the yarn and hence improves some of the desirable characteristics of yarns and fabrics.
3.3.1 Principles of micro-porous yarn production Micro-pores are incorporated within the yarn body by dissolving one of the fibre components from the yarn structure. To obtain micro-porous cotton yarn the cotton–PVA blended yarn samples are prepared in a cotton ring spinning system. Cotton and PVA staple fibres are blended in the blow room of the cotton spinning system with different blend ratios, depending on the requirement. PVA, being water soluble, is removed when the PVA blended yarn (Fig. 3.6(a)) is washed in warm water, leaving voids within the yarn body (Fig. 3.6(b)). To create micro-pores within the structure of yarns by dissolving PVA fibre, the yarns in the hank form are immersed in plain water at 70ºC temperature for 20 min with constant stirring. Then the hanks are taken out
water-soluble fibre (a)
Void
3.6 Creation of micro-pores within the yarn body.
© Woodhead Publishing Limited, 2010
(b)
Modification of textile yarn structures
101
and washed thoroughly in cold water, dried in an oven at 105ºC for 2 hours and then conditioned for 24 hours in standard atmospheric conditions to get a standard moisture content. Proper care should be taken for complete removal of the PVA component from the structure, i.e. the hanks should be properly opened, the water temperature should not drop below 70ºC and constant stirring should be maintained throughout the dissolution process.
3.3.2 Yarn properties The linear density of micro-porous yarns is finer than that of the corresponding parent yarn, due to the removal of the PVA component from the yarn. The specific volume of micro-porous yarns is higher than that of the parent yarn due to the presence of voids within the yarn body. There is a reduction in yarn tenacity after the incorporation of micro-pores with the yarn body. The yarn compressibility increases significantly after the wash, due to the removal of the PVA component from the yarn structure resulting in micro-pores within the yarn structure [10].
3.3.3 Fabric characteristics The initial modulus reduces with the increase in the proportion of micropores within the yarn structure. This may be due to the presence of micropores within the twisted yarns resulting in significant change in stress–strain characteristics at lower stress levels. The incorporation of micro-pores in the yarn structure results in an increase in fabric abrasion resistance. This may be because of the fact that yarn with more micro-pores is more flexible with a lower packing factor. This type of structure absorbs much of the abrading force and hence shows more abrasion resistance. The bending rigidity of a fabric reduces significantly when micropores are incorporated within the yarn structure, because the creation of micro-pores in the yarn makes the yarn more flexible and more easily bent during the exertion of a load. The incorporation of micro-pores in the yarn structure results in an increase in fabric compressibility and a reduction in compressional energy, because the removal of water-soluble PVA fibres makes the yarn porous and hence the fabrics more compressible. The reduction in compressional energy with increase in the level of PVA content is mainly due to the fact that a higher PVA content in the yarn makes the yarns and fabrics more porous and thus easily compressed even at lower pressure, resulting in lower compressional energy [11]. The compressional resiliency reduces with increase in micro-pores. As the number of micro-pores in the yarn increases there is a decrease in the air permeability of the fabric. This is mainly due to the higher compressibility of the yarn with more micro-pores resulting in a flattening
© Woodhead Publishing Limited, 2010
102
Technical textile yarns
of the yarns and the covering of more inter-yarn space in the fabric. Also, yarns with more micro-pores are more bulky, resulting in less inter-yarn space than in relatively compact yarns for the same thread density. Fabrics with micro-pores in the yarn have lower thermal conductivity than 100% cotton reference fabric samples, because the removal of PVA fibres creates micro-pores within the yarn structure, resulting in more entrapped air. Since air is a poor conductor of heat as compared to fibre, there is less transmission of heat through the fabric. The moisture vapour permeability of the fabric is a critical property for clothing systems that must maintain thermal equilibrium for the wearer. Fabric samples with micro-pores within the yarn structure show higher MVTR values than reference fabrics from 100% cotton normal yarn [12]. The increase in the moisture vapour transmission rate with increase in the PVA content is due to better exchange of water molecules in vapour form between two faces of the fabric. The micro-pores assist in the transfer of water particles in vapour form from one to the other by diffusion through them.
3.4
Twistless and hollow yarns
Friction spun yarn is not used for apparel due to its harsh feel, in spite of its many other positive attributes. This harsh feel is due to the wrapper fibres of the sheath which wrap the core to give adequate strength. Therefore removal of the sheath or core is sought by incorporating water-soluble PVA, without compromising the basic quality requirements of the fabrics and the physiological comfort-related properties affecting the transmission behaviour of fabrics made of modified yarn, viz. thermal conductivity, air permeability and water vapour permeability.
3.4.1 Principles of production Twistless and hollow yarns are developed by modifying core-sheath type friction spun yarns produced in the DREF-III spinning machine [12]. To obtain a twistless yarn structure, the sliver of insoluble fibre component, e.g. viscose fibre, is placed in the core and slivers with PVA fibre are placed in the sheath of core-sheath type friction spun yarn (Fig. 3.7). To produce hollow yarn the placement of the viscose and PVA slivers is simply reversed, i.e. the PVA sliver is placed in the core and viscose slivers are placed in the sheath (Fig. 3.8). To segregate the individual core and sheath components in DREF-III friction spun yarn, the PVA fibres must be removed from the yarn body and the viscose fibres should remain either in the core or in the sheath. PVA is soluble in water at 70oC, and the dissolved PVA should be removed
© Woodhead Publishing Limited, 2010
Modification of textile yarn structures
103
Staple PVA Staple viscose
3.7 Core-sheath type DREF-III yarn for twistless structure.
Staple viscose
Staple PVA
3.8 Core-sheath type DREF-III yarn for hollow structure.
from the yarn body properly. To avoid any entanglement or distortion of the structure during the PVA extraction process, the friction spun yarns are wrapped carefully on perforated plastic cheeses. Sufficient care should be taken during wrapping to avoid any overlap of the yarn which may affect the proper extraction of PVA. The cheeses are then dipped into boiling water for about 15 minutes and then shaken in hot water followed by cold water.
© Woodhead Publishing Limited, 2010
104
Technical textile yarns
3.4.2 Yarn properties
Stress
Figures 3.9, 3.10 and 3.11 show the typical stress–strain curves of parent DREF-III yarn, twistless yarn and hollow yarn, respectively. In parent
0
Strain
Stress
3.9 Typical stress–strain behaviour of parent DREF-III yarn.
0
Strain
Stress
3.10 Typical stress–strain behaviour of twistless yarn.
0
Strain
3.11 Typical stress–strain behaviour of hollow yarn.
© Woodhead Publishing Limited, 2010
Modification of textile yarn structures
105
DREF-III yarn, the sheath fibres create the transverse force to hold core fibres together. When the yarn extends, the core fibres are exposed to most of the stress initially. Therefore, breakage might start from the core section and move quickly through the wrapper section. The stress–strain curves of parent DREF-III yarn, twistless yarn and hollow yarn are different from each other. The curve for twistless yarn shows an initial very steep rise and then a sudden fall in the stress value followed by stick-slip movement of the curve (Fig. 3.10). The initial portion is due to more axially oriented fibres and the stick-slip zone is the result of fibre-to-fibre slippage in the core component due to the very low twist present in the core. The load–elongation curve for hollow yarn (Fig. 3.11) shows no such steep rise in stress at the initial stage and the curve is not smooth throughout. This may be due to the fact that in the absence of a core component when stress is being applied on the hollow sheath component, reorientation of the structure may be taking place by slipping and re-locking within the sheath fibres. The breaking elongation of hollow yarn is of a similar magnitude to that of the parent DREF-III yarn, whereas the twistless yarn breaks almost immediately [12].
3.4.3 Fabric properties The mechanical properties of fabrics made of twistless and hollow yarns in weft are given in Table 3.1. The tensile strength of fabrics with twistless yarn is found to be the highest [13]. This may be due to the fact that the compacting forces created in the fabric structure itself result in higher inter-fibre frictional force. Also, the parallel fibres in twistless yarns along the load direction result in uniform and maximum load sharing by all the component fibres of the fabric. The presence of minimum tensile strength in the weft direction of hollow yarn fabric is due to the fact that in the hollow yarn most of the fibres are not aligned to the axis of the yarn. The hollow sheath component is of wrapper fibres which wrap around the core component. The effective length of fibres along the yarn axis is very small and also the fibre migration within the hollow yarn structure is almost negligible, which results in poor strength of fabric. Fabric with hollow yarn shows multi-stage breakage. After reaching a maximum load value, structural reorientation in the weft yarns inside the fabric takes place, resulting in more than one peak. It is also clear from Table 3.1 that the tear strength of fabric made with twistless yarn is higher than that of fabric from parent yarn, whereas fabric with hollow yarn shows the lowest tear strength. The tear strength mainly depends on the yarn strength, the fabric structure and the surface characteristics of the yarn. Apart from these, the alignment of the fibres in the yarn also plays an important role. Yarns bridge the delta zone at the point of tear, and the tightness of the fabric structure determines how many yarns carry the load. A tight fabric allows only one yarn to break at a time as the tear
© Woodhead Publishing Limited, 2010
106
Yarn type
Tensile Breaking Tear strength, Flexural rigidity, Crease recovery, Compression, Abrasion resistance strength, N elongation, % N mN.mm2/mm deg % cycles
Parent DREF-III yarn
382.9
22.48
30.64
13.28
83
15.0
231
Twistless yarn
439.2
24.30
36.77
9.97
103
17.4
250
Hollow yarn
146.6
17.64
16.73
6.67
98
21.3
214
Technical textile yarns
© Woodhead Publishing Limited, 2010
Table 3.1 Mechanical properties of fabrics
Modification of textile yarn structures
107
propagates. A loose fabric allows more yarns to carry the load at any one time. Table 3.1 shows that the flexural rigidity of fabric made with twistless yarn is higher than that of fabric with hollow yarn. This result would seem to be odd as the hollow yarn is expected to show higher flexural rigidity. The deviation from what might be expected can be related to the partial flattening of hollow yarn and also the alignment of fibres. Moreover, the parallel alignment of fibres in twistless yarn develops some restrictive force during bending. The maximum weft flexural rigidity of parent yarn fabric is due to compact weft yarn. It is evident from Table 3.1 that the crease recovery of fabrics made from twistless and hollow yarns is higher than that of fabric with parent yarn. The compression of fabric with hollow yarn is maximum, followed by fabric with twistless yarn and fabric with parent yarn, the difference being due mainly to the different structure of the yarns. The abrasion resistance of fabric with twistless yarn is higher than that of fabric with parent yarns, which in turn is higher than that of fabric with hollow yarns, due to the particular wrap structure of the sheath component in weft yarn. Woven fabrics made from staple twistless and hollow yarns have a great impact on properties related to comfort, i.e. air permeability, thermal conductivity, percentage water vapour permeability, wicking and water absorbency. Woven fabric with twistless yarn shows higher air permeability than the corresponding fabric with hollow yarn (Fig. 3.12). Diameter, structure and crimp of the yarn and flattening of the fibrous structure affect the air permeability of a fabric. The very low air permeability of hollow yarn fabric may be attributed to its very bulky structure resulting in blocking of the inter-yarn spaces. For the same yarn linear density the effective diameter of hollow yarn is higher than that of twistless yarn. Blocking of inter-yarn spaces may also be due to partial flattening of the
Air permeability (cm/s/cm2)
60 50 40 30 20 10 0
Parent yarn
Twistless yarn Type of yarn in fabric
3.12 Air permeability of fabrics.
© Woodhead Publishing Limited, 2010
Hollow yarn
108
Technical textile yarns
hollow structure after removal of the core component resulting in reduction of air permeability. Twistless yarn has higher inter-yarn space due to its compact packing which in turn leads to higher air permeability. Fabric made of parent DREF-II yarn shows maximum thermal conductivity, and fabric made with hollow yarn shows minimum thermal conductivity (Fig. 3.13). Fabric with twistless yarn has intermediate values of thermal conductivity. The low value for hollow yarn is due to the very bulky structure of the hollow fibrous assembly in weft acting as an insulating medium. It entraps air in the hollow spaces and does not allow the heat of the inner layer to transmit to the outer layer [14]. Water vapour permeability is an important parameter in evaluating the comfort characteristics of a fabric, as it affects the ability to transfer perspiration from the wearer’s body. Fabric made of hollow yarn has the highest water vapour permeability, whereas fabric with twistless yarn has the lowest capability and fabric made of parent DREF-III yarn has intermediate values for permeability (Fig. 3.14). The very high water vapour permeability of fabric with hollow yarns is attributed to the very bulky structure of hollow yarn. Yarn characteristics play an important role in transmission of water vapour. An open structure allows more water transmission. Hollow yarns have a better cover factor, which allows water vapour to transfer from the inside to the outside through diffusion. The wicking property of a fabric mainly depends on the characteristics of the fibre and the structure of component yarns and the fabric. Fabric with twistless yarn has the highest wicking value followed by fabric with hollow yarns, and fabric with parent DREF-III yarn shows the lowest wicking. Twistless yarns, due to their more parallel fibres, smaller pores and definite channels, wick more water through capillary pressure. Small, uniformly distributed and interconnected pores and channels facilitate fast liquid transport [14].
Thermal resistance (tog)
0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0
Parent yarn
Twistless yarn Type of yarn in fabric
3.13 Thermal resistance of fabrics.
© Woodhead Publishing Limited, 2010
Hollow yarn
Relative water vapour permeability (%)
Modification of textile yarn structures
109
108 104 100 96 92 88
Parent yarn
Twistless yarn Type of yarn in fabric
Hollow yarn
3.14 Water vapour permeability of fabrics. 145
Water absorbency (%)
140
135
130
125
120
Parent yarn
Twistless yarn Type of yarn in fabric
Hollow yarn
3.15 Water absorbency of fabrics.
The water absorbency of a fabric mainly depends on the moisture regain of the component fibre and the open space within the fabric structure and is an indication of the sweat-holding capacity of the fabric. The fibre components in all three fabrics are exactly the same, so the amount of voids within the structure of the fabric plays an important role in water absorbency. Fabric with hollow yarn shows the highest water absorbency, whereas fabric with twistless yarn has the lowest water absorbency (Fig. 3.15). The very high value for hollow yarn fabric may be attributed to the very bulky structure of the hollow fibrous assembly. The water replaces the air in the hollow fibrous assembly and thus it can hold more water. On the other hand, fabric with twistless yarn shows the least water absorbency, which may be due to the fact that the compact and parallel aligned twistless fibrous assembly does not have sufficient open space to hold extra water.
© Woodhead Publishing Limited, 2010
110
3.5
Technical textile yarns
Future trends
The yarns produced from different spinning technologies have their own limitations. Except for ring spun yarns, the yarns from the other spinning technologies are generally not suitable for use in apparel, mainly because of the arrangement of fibres within the yarn body. These yarns can be made useful for apparel applications if their structures can be changed. Minor structural changes during the spinning process are possible to some extent by changing the spinning parameters, but significant changes in the structural characteristics of these yarns are possible only by modifying the yarn manufacturing process or by after-treatment. Such structural changes in these yarns are necessary for wider applicability and improved performance. The comfort characteristics of fabrics depend on the structure and types of yarn used among other factors. The development of new yarn structures raises questions about the nature and quality of fabric made from these yarns. The tendency to increase the yarn volume or porosity as much as possible may be traced back to the finding that revealed the relationship between the volume of a textile product and its thermal insulating properties, handle and covering power. It was found that voluminous textiles contain large amounts of air so that even with very light weight they show very good thermal insulating properties and a fuller and more agreeable handle. This is evidently due to the merit of the natural crimp, thickness and length of wool fibres. Though most of the crimp is flattened in the spinning process, it develops again in the dyeing and steaming processes so that the comparatively lower voluminosity of grey wool yarns is not typical. Any hot wet processing will restore the wool crimp and increase the bulkiness of the yarn. The principal economic merit of high bulk yarns is the lowering of product weight and consequently the saving in textile raw materials of the order of 10% and more. In very low wool blends, the high bulk of wool provides the desired wool quality handle and luxurious look to the finished products. On the other hand, the very open structure of these yarns involves increased risk of pilling and ready soiling, particularly in knitted middle-wear, which are typical of synthetics. Furthermore, in order to assert the advantage of high bulk or porous products it is necessary to instruct their users properly on their maintenance by attaching convenient instruction labels to the products. In comparison to woollen products, the products made of high bulk yarns show better performance characteristics, particularly non-felting properties and shape retention.
3.6
References
1. B. Piller, 1973, Bulked Yarns, Textile Trade Press, Manchester, UK, pp. 156–210. 2. E. Oxtoby, 1987, Spun Yarn Technology, Butterworth, London. 3. B. Banerjee, 2007, Study on the characteristics of needle-punched nonwoven fabrics
© Woodhead Publishing Limited, 2010
Modification of textile yarn structures
4.
5. 6.
7.
8.
9.
10.
11.
12.
13.
14.
111
made from blends of shrinkable and non-shrinkable acrylic, M. Tech. thesis, Indian Institute of Technology, Delhi. G. K. Tyagi and S. Dhamija, 1998, Variation in the characteristics of acrylic–cotton ring and OE rotor yarns as a consequence of steam-relaxation treatment, Indian Journal of Fibre and Textile Research, 23(3), 136–140. A. K. Sinha and G. Basu, 2001, Studies on physical properties of jute–acrylic blended bulked yarns, Indian Journal of Fibre and Textile Research, 26(3), 268–272. A. Das, V. K. Kothari and M. Balaji, 2007, Studies on cotton–acrylic bulked yarns and fabrics: Part I – Yarn characteristics, Journal of the Textile Institute, 98(3), 261–267. A. Das, V. K. Kothari and M. Balaji, 2007, Studies on cotton–acrylic bulked yarns and fabrics: Part II – Fabric characteristics, Journal of the Textile Institute, 98(4), 363–375. A. Das and R. D. Mal, 2009, Studies on cotton-acrylic bulked yarns produced from different spinning technologies: Part I – Yarn characteristics, Journal of the Textile Institute, 100(1), 44–50. A. Das, M. Zimniewska and R. D. Mal, 2009, Studies on cotton–acrylic bulked yarns produced from different spinning technologies: Part II – Fabric characteristics, Journal of the Textile Institute, 100(5), 420–429. S. M. Ishtiaque, A. Das and R. P. Singh, 2008, Packing of micro-porous yarns: Part I – Optimization of yarn characteristics, Journal of the Textile Institute, 99(2), 147–155. A. Das, S. M. Ishtiaque and R. P. Singh, 2009, Packing of micro-porous yarns: Part II – Optimization of fabric characteristics, Journal of the Textile Institute, 100(3), 207–217. A. Das, S. M. Ishtiaque and P. Yadav, 2004, Contribution of core and sheath components in the tensile properties of DREF-III yarn, Textile Research Journal, 74(2), 134–139. A. Das, S. M. Ishtiaque and P. Yadav, 2003, Properties of woven fabrics containing core-sheath DREF-III yarn in weft, Indian Journal of Fibre and Textile Research, 28(3), 260–264. A. Das and S. M. Ishtiaque, 2004, Comfort characteristics of fabrics containing twist-less and hollow fibrous assemblies in weft, Journal of Textile and Apparel Technology and Management, 3(4), 1–7.
© Woodhead Publishing Limited, 2010
4
Yarn hairiness and its reduction
A. M a j u m d a r, Indian Institute of Technology, Delhi, India
Abstract: This chapter presents an overview of spun yarn hairiness and its reduction. First the factors influencing yarn hairiness are discussed. Then the different hairiness testing and evaluation methods are compared. The importance of yarn hairiness from spinning, weaving, knitting and fabric quality viewpoints is incorporated, and yarn hairiness modelling is discussed in brief. Finally, the manufacturing methods and systems for yarn hairiness reduction are covered in detail with special focus on compact spinning, jetring and jet-winding technologies. Key words: compact spinning, hairiness testing, hairiness modelling, jetring, jet-winding.
4.1
Introduction
Yarn hairiness, one of the most important yarn parameters, is usually characterized by the amount (number or cumulative length) of fibres protruding out of the compact yarn body. In a spun yarn, the majority of the fibre ends are embedded in the main structure, although a few ends may protrude out as a consequence of their shorter length or higher bending and torsional rigidities. Hairiness could broadly be classified under three categories, namely leading hairs, trailing hairs and looped hairs. Yarn hairiness has a great influence on the sizing, weaving and knitting processes (Barella, 1983, 1993, 1997). Higher hairiness increases the cost of sizing. During the shedding operation in weaving, the hairy yarns often entangle with each other and thus hinder the creation of distinct shed which is essential for the passage of the weft or weft carrier. In case of air-jet weaving, the yarn hairiness favourably influences the air-drag exerted on the yarns. Hairy yarns generate fly during the knitting and obstruct the smooth functioning of the machine parts, including needles. Excessive variation of yarn hairiness may cause a ‘Barre’ effect in the finished fabric. However, yarn hairiness is a necessary evil. Too much hairiness is detrimental for the fabric appearance but a certain hairiness in the yarn is also desired so that the fabric possesses a softer feel and a warmer hand. It has been observed that the comfort parameters of textile fabrics (air permeability, moisture vapour transport and thermal properties) depend on yarn hairiness. Therefore, textile researchers have thoroughly investigated the role of fibre and process parameters in the 112 © Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
113
generation of yarn hairiness and the ways to curb the problems associated with excessive hairiness.
4.2
Factors influencing yarn hairiness
4.2.1 Fibre-related factors of yarn hairiness The following fibre-related factors influence the hairiness of spun yarn significantly: ∑ Torsional and flexural rigidities ∑ Fibre length and short fibre content ∑ Fibre fineness. Several studies have been conducted by researchers (Pillay, 1964a,b; Zhu and Ethridge, 1997; Atlas and Kadoglu, 2006) to elicit the relationship between the fibre parameters and yarn hairiness. Torsional and flexural rigidities A fibre becomes hair when it escapes the twisting action of spinning machines by virtue of its higher torsional and flexural rigidities. Pillay (1964a) found that the torsional rigidity of cotton fibre is the most important parameter influencing yarn hairiness. He reported that flexural rigidity and mean fibre length are the parameters in the order of influence after the torsional rigidity. Considering the fibre to be a cylindrical rod, the torsional rigidity and flexural rigidity can be expressed as follows:
Torsional rigidity =
p h d4 32l
Flexural rigidity = EI = E
p d4 64
where h is the rigidity modulus, E is Young’s modulus, I is the area moment of inertia, d is the diameter and l is the length of the fibre. Fibre length and short fibre content For a given mass of fibre, the number of discontinuous ends will be less if the mean fibre length is high. Besides, longer length reduces the torsional rigidity of the fibre. Thus yarns spun from longer fibres are less hairy. Short fibres have fewer contact points with the other fibres. Moreover, they have a preferential migration towards the surface of the yarn. Therefore, short fibres are prone to protrude out of the yarn body, causing hairiness.
© Woodhead Publishing Limited, 2010
114
Technical textile yarns
Fibre fineness As the torsional and bending rigidities of circular fibres are proportionate to the fourth power of the radius, finer fibres could be laid on the yarn body very easily due to the lack of resistance against torsion and bending. Thus finer fibres produce less hairy yarns than the coarse fibres if the twist level in the yarn is the same.
4.2.2 Process-related factors of yarn hairiness The following process-related factors influence the hairiness of spun yarn significantly: ∑ ∑ ∑ ∑ ∑ ∑ ∑ ∑ ∑ ∑ ∑
Spinning technology Winding operation Blending and mixing Combing operation Number of drawframe passages Roving fineness and twist Yarn twist Spinning draft Spindle speed Traveller weight Spacer size.
Spinning technology The spinning technology has a significant role in determining yarn hairiness. Patnaik et al. (2007) compared the hairiness of ring, rotor, air-jet and friction (DREF II) spun yarns produced from 1.5 denier and 44 mm long viscose staple fibres. The hairiness was tested using a Zweigle G566 instrument as well as by a Leica MZ6 microscope. Hairiness values of DREF II yarns were the maximum followed by ring, air-jet and rotor yarns. DREF II yarns had a large number of looped hairs (87.9%) which are created during the sudden deceleration of the fibres at the spinning drums. Moreover, the spinning tension of friction spinning technology is also very low and thus it creates a very loose yarn structure. This leads to more protruding and looped hairs in the case of DREF II yarns. Air-jet yarns showed lower hairiness than ring spun yarns due to the presence of wrapper fibres at regular intervals. In rotor spinning, the fibres are condensed on the collecting groove of the rotor due to high centrifugal forces and the whole assembly is twisted at the same time. Under these conditions, the fibres are better controlled, which leads to extremely low hairiness. The presence of wrapper fibres also reduces the hairiness of rotor spun yarns. However, the proportion of looped hairs is
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
115
also very high in the case of rotor spun yarns (88.9%). This may be due to the buckling of fibres during aerodynamic deposition at the grooves of the rotor. Looped hairs are the major contributors to the hairiness of all the yarns, followed by the protruding hairs. Most of the hairs are smaller hairs (class interval of 0–1 and 1–2 mm) for all types of yarns. Hair length followed an exponential distribution for all types of yarns. Winding operation Winding increases the hairiness of spun yarns mainly due to the abrasion between the running yarn and the machine parts. Generally, a higher winding speed is associated with more increase in the hairiness level. Ring, rotor, airjet and friction spun yarns show a similar level of rise in their S3 hairiness value after the winding operation (Patnaik et al., 2007). However, the longer hairs rise more rapidly for friction spun yarns as they have a very loose structure. On the other hand, air-jet yarns show a drastic rise in the number of short hairs (<1 mm) after winding. This may be ascribed to the opening of some wrapper fibres by rubbing. Blending and mixing parameters Mixing of two or more varieties of cotton is a very common practice in the spinning industries. Although the mixing of longer and finer cotton reduces the hairiness to some extent, the effect is not very pronounced. The reason could be attributed to the preferential migration of shorter and coarser fibres towards the yarn surface. Addition of soft wastes and comber noil in the mixing increases the yarn hairiness due to the increase in the proportion of short fibres. The effect is more marked for comber noil than the soft waste as comber noil is mainly composed of short fibres. Combing operation Combed yarns are invariably less hairy than the equivalent carded yarns. The combing process eliminates the majority of the short fibres from the feed lap. Therefore, the mean length of the fibre improves and the short fibre content reduces drastically, which ultimately results in a reduction in yarn hairiness. However, this reduction in hairiness with the increase in comber noil is less pronounced when the noil level exceeds 12%. Number of drawframe passages An increase in the number of drawframe passages reduces the yarn hairiness. Drawframe increases the orientation of the fibres and also removes the hooks
© Woodhead Publishing Limited, 2010
116
Technical textile yarns
present in the card sliver. Therefore, the mean fibre length increases with the number of drawframe passages and thus the yarn hairiness reduces. However, the positive effect on hairiness will diminish with the increase in the number of drawframe passages. Roving fineness and twist Roving fineness plays an important role in determining the hairiness level of spun yarns. For a given yarn fineness, the hairiness shows concomitant reduction with the fineness of the roving. For example, if 30 Ne ring spun yarn is produced from rovings of 0.8 and 1.0 hanks, then the yarn made with 1.0 hank roving will give less hairiness. If the roving is coarser then the fibres tend to form a wider ribbon in the drafting zone and thus incorporation of the edge fibres becomes difficult. This ultimately increases the hairiness. An increase in roving twist reduces the yarn hairiness, as the spreading of the fibres at the nip of the drafting rollers is prevented to some extent. Yarn twist Yarn twist is the most important process parameter for controlling hairiness. As the twist increases, more torque is applied at the yarn forming zone and thus the probability of a fibre being embedded into the main yarn body increases. For a given yarn delivery speed, this can be attained by increasing the spindle speed, the rotor speed, the jet pressure and the friction drum speed in ring, rotor, air-jet and friction spinning technologies, respectively. Spinning draft Research work by Pillay (1964b) has shown that for the same yarn count as the ringframe draft increases, the yarn hairiness also increases. A higher spinning draft requires coarser roving for the same yarn count. Thicker roving gives rise to a high degree of fibre spread between the rollers. As the ribbon of fibres comes forward, the fibres at the edges of the wider ribbon become hairs. Spindle speed An increase in spindle speed, at constant twist per unit length of yarn, also increases yarn hairiness due to the higher centrifugal forces associated with the higher spindle speed. The effect was similar when the spinning tension was kept constant by reducing the traveller weight with increasing spindle speed.
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
117
Traveller weight In general, a higher traveller weight reduces yarn hairiness. With a higher traveller weight, more twist flows to the spinning zone from the balloon zone and thus the hairiness is reduced. Moreover, a higher traveller weight leads to a higher spinning tension and better binding of the fibres in the yarn body. Spacer size Thicker spacers generally lead to lower hairiness. Spinners generally prefer the thinnest possible spacer with the aim of minimizing the mass unevenness and imperfections in the yarn. However, the use of a thinner spacer can ultimately lead to a significant increase in hairiness. As the size of the spacer is reduced, the gap between the top and bottom apron in the main drafting zone of the ringframe reduces. Thus the fibre strand tends to be flatter and wider, resulting in increased hairiness.
4.3
Yarn hairiness measurement
The basic principles of yarn hairiness measurement could be classified under the following two heads: ∑
Counting the number of fibres longer than a given reference length or longer than a set of reference lengths that are protruding from the yarn body per unit length of yarn. ∑ Measuring the cumulative length of all protruding fibres outside the yarn body per unit length of yarn.
4.3.1 Shirley yarn hairiness tester The Shirley yarn hairiness tester measures yarn hairiness based on an optical principle. The yarn under test is passed between a beam of light rays and the receptor photocell at a constant speed. When a hair passes between the light rays and the receptor, the light rays are momentarily interrupted and an electronic circuit counts the interruption as one hair. The instrument has two sets of yarn guides as shown in Fig. 4.1 (Saville, 1999). The lower set leads the yarn over a guide at a fixed distance of 3 mm from the receptor. The upper set leads the yarn over a movable guide which can be adjusted at a distance of between 1 mm and 10 mm from the receptor. Therefore, testing of hair length can be customized up to a length of 10 mm. The number of hairs counted over a length of 1000 m is reported.
© Woodhead Publishing Limited, 2010
118
Technical textile yarns 10 mm
Alternative yarn path Aperture
Variable 3 mm Fixed 3 mm yarn path
4.1 Shirley yarn hairiness tester (Saville, 1999).
4.3.2 Zweigle yarn hairiness tester This instrument tests the yarn hairiness exhaustively by counting the hairs in 12 different length groups and therefore the distribution of hair in different length groups can be obtained. The hairs are counted simultaneously by a set of photocells arranged at distances of 1, 2, 3, 4, 6, 8, 10, 12, 15, 18, 21 and 25 mm from the yarn. The principle of the instrument is quite similar to that of the Shirley hairiness tester. The yarn and the protruding fibres interrupt the incident light beam and thus cause a variation in the luminance of the light beam. This luminance is recorded by the phototransistor, converted to an electric current and then amplified. The instrument measures the total number of hairs in each length category for the set test length. The instrument also computes the total number of hairs above 3 mm in length, which can be used as a comparison with the results obtained from the Shirley instrument (S3). It also computes a hairiness index, using a rather complicated mathematical expression, which is a non-dimensional numerical value and provides a relative reference to the hairiness level of the yarn.
4.3.3 Uster yarn hairiness tester The hairiness measuring principle of the Uster Tester (III or IV) is different from that of the Shirley and Zweigle instruments, and therefore a direct comparison cannot be made between the results obtained from these instruments. In this instrument the yarn is illuminated by a parallel beam
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
119
of infrared light as it runs through the measuring head. Only the light that is scattered by protruding hairs reaches the detector, as shown in Fig. 4.2 (Saville, 1999). The direct light is prevented from reaching the detector by an opaque stop. The amount of scattered light is converted to an electrical signal and considered as a measure of hairiness. The instrument is thus monitoring only total hairiness, but the Uster evenness data collection system can monitor changes in hairiness along the yarn by means of a diagram, spectrogram and CV of hairiness in a manner similar to that used in evenness testing.
4.3.4 Comparison of hairiness results from different instruments As the three instruments described above express the yarn hairiness in different forms, comparing the results without proper understanding often becomes misleading. Some researchers have attempted to derive the relationship between the results obtained from these instruments. Barella and Manich (1988) reported that the correlation between the S3 values obtained from the Shirley and the Zweigle G 565 was 0.73. Basu (1999) developed the following empirical relation between the hairiness results (number of protruding fibres longer than 3 mm) obtained from the Shirley and Zweigle G 565 instruments:
HZweigle = 0.573HShirley + 247.54 (correlation coefficient = 0.98)
Basu also used a simple expression to calculate the K value from the results of the Zweigle G 565 tester. This K value could be compared directly with the hairiness index measured by the Uster Tester III.
K=
11
1 ∑ N L + N12 L12 100 ,000 i=1 i i Yarn Scattered light
Receiver
Transmitter Stop
Direct light
4.2 Uster yarn hairiness tester (Saville, 1999).
© Woodhead Publishing Limited, 2010
120
where
Technical textile yarns
li + li +1 2 li = length of hairs (mm) in class i li+1 = length of hairs (mm) in class (i +1) Ni = number of hairs in class i per 100 m length of yarn. Li =
He found that the K value was lower than the hairiness index (H) value given by the Uster Tester III, because hairs smaller than 1 mm in length were not considered in the above expression for K. The correlation coefficient between the Uster Tester hairiness index value and the Zweigle K value, calculated by the above equation, was found to be encouraging (0.83). The relationship between the results reported by different instruments is shown in Fig. 4.3.
4.3.5 Effect of testing parameters on yarn hairiness The speed of yarn traverse during hairiness testing often influences the hairiness results (Wang, 1998a). The hairiness could be measured at a speed as high as 400 m/min. Therefore, high air drag forces act on the protruding fibres. In ring spun yarns, most of the hairs are trailing. Therefore, while unwinding from the ringframe package, these hairs become leading and, due to the air drag, the projected length of the fibres tends to increase. However, for longer hairs the effect may become just the opposite (especially at high 80
10
8
Zweigle K¢
SDL Hairs/1000 m ¥ 103
60
40
6
4
20 2 r = 0.98 0 0
5 10 15 20 25 30 35 40 45 50 Zweigle S3/1000 m ¥ 103
r = 0.83 0 0
2
4 6 Uster UT3 H
8
10
4.3 Correlation of yarn hairiness results from different instruments (Basu, 1999).
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
121
traverse speed) as the longer hairs may bend as a result of a higher bending moment acting at their bases. This may ultimately result in reduction in the number of hairs in the long length group. The experimental results obtained by Wang (1997, 1998b) ratified the above mechanisms, although there were also a few contradictions (Wang and Chang, 1999). The S3 values of rotor spun (18 tex) yarns measured by the Zweigle G 565 tester at different speeds are depicted in Fig. 4.4. Wang et al. (1999) also studied the effect of testing speed (Uster Tester III) on the hairiness of worsted yarns spun with different levels of twists. Irrespective of yarn twist level, hairiness measured at a speed of 400 m/min was higher than that measured at 100 m/min or 25 m/min, as shown in Fig. 4.5. The hairiness value increases slightly when the testing speed is increased from 25 m/min to 100 m/min. However, this was not statistically significant at a 5% level.
S3 value (hairs/m)
30
20
10
0
10
20
30
40 50 60 70 Test speed (m/min)
80
90
100 110
4.4 Effect of test speed on the hairiness of 18 tex rotor yarns (Wang, 1998b).
Average hairiness index
8 7.5 7 6.5
373 tpm
6
563 tpm
5.5
665 tpm
5 4.5 4 25
100 400 Test speed (m/min)
4.5 Effect of test speed on the hairiness of worsted yarns (Wang et al. 1999).
© Woodhead Publishing Limited, 2010
122
Technical textile yarns
4.4
Importance of yarn hairiness
4.4.1 Effect of yarn hairiness in spinning The effect of yarn hairiness on air drag, tension and power consumption in ring spinning has been researched by Tang et al. (2004a,b, 2006) and Chang et al. (2003). Researches by Tang et al. (2006) showed that yarn hairiness has a considerable influence on air drag in ring spinning. Theoretically the power (P) required to overcome skin friction drag on the surface of a revolving yarn package is expressed as follows:
P = 1 r(πDV )3 ACd 2
where r is the density of the air, D is the package diameter, V is the revolutions per second for the package, A is the surface area of the package and Cd is the skin friction coefficient on the yarn package surface. The experimental results showed that the effect of yarn hairiness on the skin friction coefficient is inversely proportional to the spindle speed. At a low spindle speed of 2000 rpm, the skin friction coefficient was 98% higher for a normal package as compared to the package of singed yarns. However, at a spindle speed of 16,000 rpm, the skin friction coefficient was only 16% higher for the normal package as compared to the package of singed yarns. On average, 25% of the air drag on the surface of a rotating cotton package is contributed by the hairiness, whereas it is around 35% for the wool yarn package. The difference between the normal and singed yarn packages in terms of air drag is higher at low spindle speeds and diminishes as the spindle speed in rpm is increased. The air drag on the ballooning cotton yarn during rotation reduces by around 9% after singing. It is expected that a ringframe package will require more power for rotation if the yarn is hairy. Chang et al. (2003) studied the effect of yarn hairiness on power consumption in rotating a ring spun yarn package and concluded that the effect of hairiness on power consumption is statistically significant at a 5% level. The theoretical model developed by them showed that the power requirement to rotate a package during ring spinning will depend on factors like the number of hairs, hair length, spindle speed and package size. Practical experiments also showed that power consumption in ring spinning increases with the increase in the number of hairs and hair length.
4.4.2 Effect of yarn hairiness in weaving and knitting Weaving In the case of shuttle looms, hairiness of yarns can prevent the formation of clear shed which is essential for the passage of the shuttle. During the
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
123
shedding operation, a yarn may become entangled with its neighbour due to repeated abrasion. This may also lead to warp breakage. Therefore, size coatings are applied on the surface of the yarns so that all the protruding hairs are laid down on the yarn body and a clear shed is formed for the passage of the shuttle or other weft carriers. The size uptake is directly related to the level of yarn hairiness. Therefore, the sizing operation becomes more expensive for hairy yarns. The yarn hairiness influences the velocity profile of the yarn during weft insertion in the air-jet weaving system. The air-drag force acting on the yarn is expressed by the following equation: Drag force (D ) = 1 rCf A(Vrel )2 2
where r is the density of the fluid (air), Cf is the drag coefficient, A is the surface area of the yarn and Vrel is the relative velocity between air and the weft. The drag coefficient is expected to be higher for a hairy yarn and therefore the acceleration and velocity of the hairy weft will be higher. Adanur and Turel (2004) experimentally verified the effect of yarn hairiness on the weft velocity profile in the air-jet weaving system (Fig. 4.6). They found that both the initial acceleration and the yarn velocity across the loom were significantly higher for the yarn with an S3 value of 4293 than for the equivalent yarn with an S3 value of 903. Knitting As the production speed of knitting machinery increases, fluff generation becomes a major cause of serious process problems in the case of cotton yarns. All contact points of the yarn on the circular knitting machine are
Yarn velocity (m/s)
40
S3 = 4293 S3 = 903
35 30 25 20
31.5
63
94.5 126 157.5 Distance (cm)
189
220.5
4.6 Effect of hairiness on the velocity profile of the weft in air-jet weaving (Adanur and Turel, 2004).
© Woodhead Publishing Limited, 2010
124
Technical textile yarns
potential places for fluff shedding. The problem becomes more serious when processing yarns having high hair severity (long hairs) rather than high overall hairiness. Besides, to achieve the required knitted fabric properties, short hairs are desirable whereas long hairs are problematic as they cause end-breaks and create a fuzzy appearance and pilling. Knitting defects are sometimes identified during the knitting process while others appear after dyeing and finishing. Yarn hairiness can cause a ‘Barre’ effect in fabrics (Srinivasan and Balamurugan, 2008). This shows up more prominently after dyeing and affects the appearance of the finished fabric. Knitting yarns are generally waxed, which not only reduces the friction between the yarn and the machine parts but also lays the protruding fibres on the yarn body and thereby reduces the chances of fluff generation.
4.4.3 Effect of yarn hairiness on fabric properties Pilling The hairiness of yarns influences the pilling tendency of the fabric. During abrasion, the hairs entangle with each other and thus create pills which spoil the appearance of the fabric. This is more dangerous for synthetic yarns as the strength of the synthetic fibre is high and thus the pills do not fall away easily. Research work conducted by Beltran et al. (2007) on single jersey knitted wool fabrics has shown that a relatively high reduction in hairiness is required to make significant improvements in fabric pilling. They compared three technologies, namely conventional ring spinning, Solospun and JetWind, and found that the yarn hairiness was 46% lower for Solospun and 33% lower for JetWind with respect to the ring yarns. Interestingly, they found that the final fabric made from JetWind yarn had one grade better pilling rating than fabric made from ring yarns, whereas fabric made from Solospun yarn had only a half grade improvement over fabric made from ring yarns. The improved pilling performance observed with the JetWind method over the Solospun indicates that the number of hairs is not the singular aspect that influences fabric pilling. The hairiness configuration and associated fibre security within the yarn or fabric structure also play major roles. However, Lohrasbi et al. (2003) found that for yarns made from blends of shrinkable and non-shrinkable acrylic fibres, the correlation between yarn hairiness and fabric pilling is not very strong. They found that the most hairy yarn is actually producing the minimum number of hairs in the knitted fabric. Abrasion resistance The abrasion resistance of the fabric also deteriorates with increase in yarn hairiness. Akaydin (2009) found that the abrasion resistance of single jersey,
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
125
rib and interlock knitted fabrics made from compact yarns was better than for the equivalent ring spun yarns. They opined that the lower hairiness of compact yarn is one of the main reasons for improved abrasion resistance. Thermal properties Yarn hairiness can significantly influence thermal comfort properties of fabrics. Generally yarns with higher hairiness demonstrate lower thermal conductivity and higher thermal resistance as the protruding hairs can trap the static air, which is a bad conductor of heat. Therefore, fabrics made from low twist yarns give lower thermal conductivity and higher thermal resistance than fabrics made from high twist yarns. Similarly, fabrics made from carded yarns show lower thermal conductivity and higher thermal resistance than fabrics made from equivalent combed yarns. Ozdil et al. (2007) found that the thermal absorptivity value increases (cooler feeling) with an increase in yarn twist. This is explained by the lower hairiness of the high twist yarns. A decrease in hairiness increases the contact surface area between the fabric and the skin and thus creates a cooler feeling.
4.5
Modelling of yarn hairiness
4.5.1 Mathematical and statistical models Modelling of yarn properties is one of the most fascinating areas of textile research, and several researchers (Chasmawala et al., 1990; Majumdar and Majumdar, 2003; Neckar and Voborova, 2003; Baykal et al., 2007) have attempted to develop mathematical and statistical models to predict the hairiness of spun yarns using the fibre properties, blend proportion, process parameters and yarn count as inputs. Majumdar and Majumdar (2003) developed the following multiple linear regression equation to predict ring spun yarn hairiness (Uster Tester III) from the cotton fibre properties:
Hairiness = 23.36 – (0.019 ¥ bundle tenacity)
– (0.242 ¥ fibre elongation) – (0.194 ¥ UHML)
– (0.112 ¥ UI) – (0.288 ¥ micronaire)
– (0.028 ¥ Rd) – 0.143(+ b) – (0.084 ¥ yarn count)
where UHML is upper half mean length, UI is uniformity index, Rd is the reflectance degree and + b is the yellowness value of cotton fibre. The correlation coefficient between the actual and predicted hairiness, using the above equation, was around 0.93. The negative coefficient of micronaire is rather surprising as higher cotton fibre micronaire is expected to increase the yarn hairiness. However, this may have happened due to the
© Woodhead Publishing Limited, 2010
126
Technical textile yarns
inherent correlation between the properties of cotton fibres. Chasmawala et al. (1990) derived the following regression equation for predicting the hairiness of air-jet spun yarns expressed by the number of hairs per eight yards:
Hairiness = 4561 – (42.8 ¥ number of wild wrapper fibres)
– (92.4 ¥ number of wild fibres)
– (35.1 ¥ number of core fibres)
4.5.2 Artificial neural network modelling of yarn hairiness: a case study In the last two decades intelligent models such as artificial neural network (ANN) and neuro-fuzzy systems have been used for the modelling and prediction of yarn properties. These models are fault tolerant and have a very high prediction accuracy. ANN is a potent data-modelling tool that is able to capture and represent any kind of input–output relationships. The motivation for development of ANN stemmed from the desire to develop an artificial system that can perform intelligent tasks similar to those performed by the human brain. A typical multi-layer ANN is shown in Fig. 4.7. Here, one or more hidden layers can be sandwiched between the input and output layers. The number of hidden layers and the number of neurons per layer vary depending on the complexity of the problem. Each neuron receives a signal from the neurons of the previous layer and these signals are multiplied by separate synaptic weights (W). The weighted inputs are then summed up and passed through a transfer function (usually a sigmoid), which converts the output to a fixed range of values. The output of the transfer function is then transmitted to the neurons of the next layer. Finally the output is produced at the neurons of the output layer and the error signal (the difference between the actual and predicted values) is calculated. The error signal is then used to optimize the connection weights between the neurons of different layers using suitable algorithms. WK1 X1
WKn Output
Inputs Xn
Hidden layer
4.7 A simple artificial neural network model.
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
127
In this case study (Majumdar and Majumdar, 2003) of yarn hairiness prediction, cotton crop study data of 1997 and 1998 from the International Textile Centre, Texas, USA, were used. Cotton fibre and yarn data of 87 and 108 samples for ring and rotor spun yarns, respectively, were used for modelling. Seven cotton fibre properties measured by HVI, namely fibre bundle tenacity, elongation, upper half mean length (UHML), uniformity index (UI), micronaire, reflectance degree and yellowness were used as inputs to the ANN model. Yarn count (Ne) was also introduced in the model as an input. The only output from the ANN model was the hairiness index as measured by the Uster Tester III. For the training of ANN, 72 and 88 sets of input–output data were used for ring and rotor spun yarns, respectively. The remaining data sets (15 for ring spun yarns and 20 for rotor spun yarns) were used for the validation of trained networks. ANN models having only one hidden layer were used. However, the number of neurons in the hidden layer was varied from six to 14 with an increment of two at each step. To overcome the problem of an undertrained or overtrained network, training ceased as soon as the mean squared error (MSE) in the test set data reached the minimum level. Training was done with a back-propagation algorithm. The log-sigmoid transfer function was used in the hidden and output neurons. Prediction performance of the ANN model After the completion of training, the test set data were presented to the trained network for the prediction of yarn hairiness. Statistical parameters such as the correlation coefficient (R) between the actual and predicted values, the mean absolute error percentage and the mean squared error (MSE) were calculated to appraise the predictive power of ANN and to compare it with that of regression models developed using the same data (Table 4.1). It was observed that the ANN model showed a very high prediction accuracy (R > 0.95) for ring and rotor yarn hairiness. The mean error of prediction was lower than 3% for ring spun yarn and 2% for rotor spun yarn. Detailed analysis of the ANN model revealed that for ring spun yarns, three prediction results Table 4.1 Prediction performance of ANN and regression models Yarn type
Statistical parameter
Prediction models
ANN
Linear regression
Ring
Correlation coefficient Mean absolute error % Mean squared error
0.958 2.75 0.039
0.929 3.99 0.066
Rotor
Correlation coefficient Mean absolute error % Mean squared error
0.952 1.75 0.0076
0.934 2.07 0.011
© Woodhead Publishing Limited, 2010
128
Technical textile yarns
out of 15 test set data exhibited more than 5% absolute error. In contrast, out of 20 test set data, there were no such prediction results for rotor spun yarns. This demonstrates that the prediction performance was more accurate and consistent for rotor spun yarns. In comparing the results of the ANN and regression models, it was observed that the mean absolute error percentage of prediction is higher and the correlation coefficient is lower for the regression model (Table 4.1). This strengthens the perception that some non-linear relationship exists between fibre properties and yarn hairiness, which cannot be captured by the linear regression model (Zhu and Ethridge, 1997). The ANN model having only one hidden layer is capable of handling non-linear relationships. Therefore, the prediction accuracy of ANN models is better than that of the linear regression model. Figure 4.8 depicts the absolute error percentage of prediction in individual test samples of ring spun yarns by the ANN and regression models. Out of these 15 test set samples, ANN shows a lower error of prediction than the regression model in 11 samples.
4.6
Yarn hairiness reduction
4.6.1 Compact spinning technology The compact spinning system, which is a development of the ring spinning system (Cheng and Yu, 2003; Basel and Oxenham, 2006; Celik and Kadoglu, 2004; Nikolic et al., 2003) , was first demonstrated at ITMA 99. In conventional ring spinning, the width of the fibre flowing ribbon at the 10
ANN Regression
Absolute prediction error %
9 8 7 6 5 4 3 2 1 0 1
2
3
4
5
6
7 8 9 10 11 Sample number
12 13
14 15
4.8 Prediction performance of ANN and regression model for ring spun yarns.
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
129
back of the front roller nip is higher than the width of the spinning triangle. Therefore, some of the fibres, due to their bending rigidity, fail to incorporate themselves into the main yarn body, causing hairiness. In compact spinning, the width of the fibre flowing ribbon is reduced and becomes equal to that of the spinning triangle. Therefore, most of the fibres are incorporated in the yarn body and consequently the hairiness is reduced. Rieter, Zinser and Suessen are the major manufacturers of compact spinning machines. In the Rieter compact spinning machine (K44), the front bottom roller has a larger diameter and is perforated to aid the air suction. The slot, which facilitates the air suction, extends between the nip created by the front top roller and the nip roller (Fig. 4.9). Therefore the width of the fibre ribbon is reduced significantly (from B to b) between the two nips. Cheng and Yu (2003) compared the properties of compact yarns spun on Rieter ComforSpin K 40 machines and those of conventional ring spun yarns. They found that the hairiness of the compact yarns was much lower than that of the ring spun yarns. However, the advantages of compact spun yarns were found to diminish as the yarn count became coarser, as shown in Fig. 4.10. The aerodynamic condensing system of compact spinning technology has better fibre control for fine counts where there are fewer fibres in the ribbon. When the yarn becomes coarser the effectiveness of the compacting action reduces. Moreover, in case of coarser yarns, the slots on the stationary drum of the condensing system could be blocked more frequently by the shorter fibres through the holes of the perforated drum. Basel and Oxenham (2006) spun 100% Pima cotton and 50:50 cotton:polyester blended yarns at different twist multipliers (2.8, 3.2, 3.6, 4.0 and 4.4) using Suessen Elite® and conventional ring spinning machines. They found that the hairiness of the compact spun yarn is significantly lower than that of ring spun yarns. However, the difference in hairiness level diminished as the twist multiplier increased, as shown in Fig. 4.11. It could therefore be inferred that the superiority of compact spinning technology
B
B
b
(a)
b
(b)
4.9 Spinning triangles in (a) ring spinning and (b) compact spinning (source: technical literature of Rieter Spinning Systems).
© Woodhead Publishing Limited, 2010
Technical textile yarns
Mean hairiness
130
5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0
COM4 Ring
Ne 38
Ne 50 Ne 60 Yarn count
Ne 80
4.10 Hairiness of compact and ring spun yarns in different counts (Cheng and Yu, 2003). 7
Conventional Compact
6
Hairiness
5 4 3 2 1 0
2.8
3.2
3.6 Twist multiplier
4
4.4
4.11 Hairiness of compact and ring spun yarns in different twist levels (Basel and Oxenham, 2006).
over ring spinning technology is more marked for finer yarns and for low twist levels. Application of compact spinning technology to long staple yarns has also been investigated by Celik and Kadoglu (2004). They used a compact spinning attachment (Suessen Elite®) for converting the ring spinning unit. Normal ring and compact yarns of 19 tex and 25 tex were spun from 100% wool, 45:55 wool:polyester, 50:50 wool:acrylic and 100% acrylic fibres using twist factors ranging from 2530 to 3160. For all the materials and twist levels, the compact spun yarns demonstrated significantly lower hairiness as measured by the Uster Tester III and the Zweigle G 565 tester. The Zweigle hairiness results further showed that the occurrence of hairs in the longer length class was much lower in the case of compact spun yarns. In the case of long staple spinning also, the benefit of compact spinning is more visible at lower levels of yarn twist.
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
131
4.6.2 Jet-ring spinning system Jet-ring spinning technology (Fig. 4.12) amalgamates the ring spinning and air-jet spinning technologies primarily with the objective of reducing yarn hairiness (Wang, 1999; Cheng and Li, 2002; Wang et al., 1997). In jetring, an air-jet is positioned between the lappet (pigtail) guide and the front roller nip of the ring spinning machine. The air-jet creates upward swirling of air against the direction of movement of the yarn. Thus it precludes the possibility of increasing the hairiness of the yarn, as in ring spinning mostly trailing hairs are generated. The swirling air current twists the yarn in the opposite direction to the main twist which is applied by the ring and traveller assembly. Therefore, over the air-jet the yarn first gets untwisted and then gets twisted again. This loosening and tightening of the structure facilitates the incorporation of some of the protruding fibres in the main yarn body. Yarn piecing is also simple in the jet-ring spinning system. However, for the best performance of the system, parameters such as air pressure and the distance between the front roller nip and the air-jet must be optimized. Besides the design parameters of the jet such as the angle of the jet orifice, the diameter of the twisting chamber and the length of the nozzle play important roles in the wrapping action of the protruding fibres. Cheng and Li (2002) investigated the effect of spindle speed, air pressure, twist factor and the distance between the front roller nip and the nozzle inlet on the hairiness of cotton and polyester jet-ring spun yarns. Air pressure and yarn hairiness were negatively correlated, as expected. The hairiness reduction was more pronounced in the case of cotton yarns as compared to polyester yarns as shown in Fig. 4.13. The distance between the front roller nip and the nozzle inlet has the minimum influence on yarn hairiness. However, this
Front rollers
Air jet
Pigtail guide
Ring and traveller
Yarn bobbin
4.12 Jet-ring spinning system (Wang, 1999).
© Woodhead Publishing Limited, 2010
132
Technical textile yarns
Number of hairs > 3 mm
120 100 80 60 40 Cotton jet-ring
20
Polyester jet-ring
0 0
0.5
1 1.5 Pressure (bar)
2
2.5
4.13 Effect of air pressure on yarn hairiness in jet-ring spinning (Cheng and Li, 2002).
distance is very important for trouble-free running of the system, because any disturbance created by the air-jet can reach the spinning triangle and cause a yarn break if the distance between the front roller nip and the nozzle inlet is very small.
4.6.3 Jet-winding or nozzle winding system In the jet-winding or nozzle-winding system an air-jet is used in the winding machine to reduce the yarn hairiness (Rengasamy et al., 2005, 2006; Patnaik et al., 2006, 2008; Zeng and Yu, 2004; Wang and Miao, 1997; Chellamani et al., 2000). This approach seems to be attractive as winding generally increases the hairiness due to the abrasion of the yarn with various machine parts. The nozzle-winding technique (Fig. 4.14) was used by Patnaik et al. (2007) to reduce hairiness of ring, rotor, air-jet and DREF-II yarns spun from the same viscose staple fibres (1.5 denier and 44 mm length). Yarns were passed through an air-nozzle with air inlets having an axial angle of 45° and a yarn channel diameter of 2.2 mm. The air pressure in the nozzle was kept at 0.9 bar and the airflow in the nozzle was along the yarn movement. S3 values for nozzle-wound yarns were found to be nearly 17–30% less than that of the corresponding spun yarns. However, in comparison with the yarns wound without a nozzle, the nozzle-wound yarns had 20–37% lower S3 values. The maximum reduction in S3 values, with respect to the parent spun yarns, was found for DREF-II yarns (30%) followed by ring spun (28%), air-jet (20%) and rotor spun yarns (17%). The greater the number of hairs present on a yarn, the higher is the hairiness reduction by the nozzle. It was observed that the number of hairs from all the hair length groups is invariably reduced by the nozzle winding system. However, the reduction is larger for longer hairs than for shorter ones, because more air-drag forces act on the longer hairs.
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
133
Winding drum Tension sensor Knotter Electronic clearer Tensioner Nozzle housing
Ring yarn
4.14 Jet-winding system (Patnaik et al., 2008).
Besides, after bending, the long hairs are tied up with the yarn body by the protruding hairs in their vicinity as they are wrapped by the action of air drag forces. The percentage reduction in the number of short looped hairs is much lower than for the longer looped hairs, indicating the high resiliency of the former and the associated difficulty in tying them with the yarn body. Significant amounts of research (Rengasamy et al., 2005, 2006; Patnaik et al., 2006, 2008; Zeng and Yu, 2004) have been conducted in recent years to optimize the parameters of the jet-winding process such as the axial angle of the jet, jet diameter, air pressure and winding speed. Techniques such as design of experiments (Box and Behnken), numerical simulation and computational fluid dynamics (CFD) have been used to analyse the air–fibre interaction during the jet-winding process. Rengasamy et al. (2005) tried to optimize the process conditions of the jet-winding system using the Box and Behnken factorial design approach and computational fluid dynamics (CFD) for cotton ring spun yarns. Two sets of experiments were conducted for optimizing the jet angle and jet diameter. In the first set of experiments, three jet angles (40°, 45° and 50°) were used, keeping the jet diameter constant at 2.2 mm. In the second set of experiments, the jet angle was kept constant at 40° and the jet diameter was varied (1.8 mm, 2.2 mm and 2.6 mm). The other two variables for both sets of experiments were yarn linear density (10, 20 and 30 tex) and winding speed (800, 1000 and 1200 m/min). It was observed that 45° of jet angle was optimum, followed by the 40° jet angle. Analysis by CFD modelling revealed that the higher axial velocity in the jet at 45° (91 m/s),
© Woodhead Publishing Limited, 2010
134
Technical textile yarns
in comparison to the jet at 40° (84 m/s), increases the swirling intensity, causing more wrapping of fibres around the yarn body which thus leads to more reduction in yarn hairiness. The jet diameter of 2.2 mm was found to be the best from the hairiness reduction point of view. In a similar study on polyester yarns (30 tex) Patnaik et al. (2008) studied the effect of air channel diameter, jet angle, fibre fineness and air pressure on the S3 hairiness reduction. They conducted two separate experiments with three factors and three levels. The three fibre deniers were 1, 1.2 and 1.4 and the air pressure was 0.5, 0.7 and 0.9 bar. In one experiment, only the axial angle of the air inlets was varied from 40° to 50°, keeping the jet diameter constant at 2.2 mm. In the second setup, the jet diameter was varied from 1.8 mm to 2.6 mm keeping the axial angle of the air inlets constant at 40°. It was found that when the jet angle and jet diameter are kept constant, a higher air pressure (0.9 bar) and a high fibre denier (1.4) give the maximum reduction in S3 hairiness value as shown in Fig. 4.15. The air drag acting on the fibre is proportional to the square root of the denier, and the bending rigidity of the fibre is proportional to the square of the denier. Therefore, theoretically, it is expected that higher denier polyester fibres will show less reduction in hairiness. However, the statistical effect of presentation of more hairs to the nozzle by the coarser fibre yarn seems to be playing a predominant role in hairiness reduction. Patnaik et al. also reported that for constant fibre denier and jet diameter, a combination of higher air pressure (0.9 bar) and 45° of jet angle gives the best performance (Fig. 4.15). CFD modelling also ratified the above results. The resultant velocity of the air acting on the yarn surface and on hairs (near the wall of the jet) is higher in the case of the nozzle with 45° axial angle in comparison to the nozzles with 40° and 50° axial angles. While experimenting with different jet diameters, the maximum air velocity was observed in the vicinity of the nozzle with 1.0
1.0
28
23 22
20 0.0
–1.0 –1.0
17
16
1.0
14
19 16 15
–0.5
10
15
–0.5 0.0 0.5 Fibre fineness (a)
20
18
16
14
12
10 –1.0 –1.0
21
17
22
–0.5
Air pressure
0.0
24
Air pressure
0.5
26
0.5
–0.5 0.0 0.5 Axial angle of air inlets (b)
1.0
4.15 Effect of jet-winding parameters on hairiness reduction (Patnaik et al., 2008).
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
135
1.8 mm diameter followed by those of 2.2 and 2.6 mm diameter. However, in terms of hairiness reduction, the jet of 2.2 mm diameter was the best, followed by nozzles with 1.8 mm and 2.6 mm diameters. For the nozzle with the smaller diameter (1.8 mm), the air velocity was very high and the diffusing tendency of the air velocity was less. Therefore rubbing of the yarn at the wall of the nozzle might have affected the hairiness reduction.
4.6.4 Modified yarn path in ring spinning The spinning triangle produced during ring spinning is not symmetrical. If the yarn is twisted in the Z direction then the fibres on the right-hand side of the spinning triangle often undergo a pre-twisting process. In contrast the fibres on the left-hand side of the triangle are under a lower level of control and are therefore, more prone to hair formation. However, this problem could be mitigated by using two approaches to the modified yarn path in ring spinning (Fig. 4.16). In the case of the left diagonal approach (Fig. 4.16(a)), the yarn delivered from a drafting unit is taken up by the adjacent bobbin to the left of the drafting unit, instead of the bobbin directly under the drafting unit. This arrangement will ensure better control of the fibres situated on the left-hand side of the spinning triangle as compared to the conventional arrangement. The fibres on the right-hand side of the spinning triangle will still remain under the pre-twisting control, whereas the fibres on the left-hand side of the triangle are better twisted due to the reduction of distance. The experimental results show that with the left diagonal arrangement (Fig. 4.16(a)) the hairiness in the yarn reduces, whereas it increases with the right diagonal arrangement (Fig. 4.16(b)). Wang and Chang (2003) conducted practical experiments with the 24 spindle Cognetex FLC worsted ring frame for the verification of the above hypothesis. However, the left diagonal approach for the Z twisted yarns increased the yarn hairiness, but in the case of the right diagonal approach, yarn hairiness reduced. The number of S3 hairs is produced by a different arrangement as shown in Table 4.2. The right diagonal yarn path results in fewer hairs in almost all the length groups, and the reduction in the average S3 value was about 8.3% in comparison with the average S3 value for the conventional ring spun yarns. This yarn hairiness reduction may be due to the increased pre-twisting effect on the right-hand side of the spinning triangle when the right-diagonal yarn path is used. Pre-twisting of fibres occurs primarily on the right-hand side of the twist triangle. With the right diagonal arrangement, there is an increased concentration of fibres on the right-hand side of the skewed triangle, so an increased number of fibres will be pre-twisted. This pre-twisting improves the control of fibres and allows more fibres to be incorporated into the bulk of the yarn structure, thus
© Woodhead Publishing Limited, 2010
136
Technical textile yarns Delivery roller
Traveller
Ring
Bobbin Position 2 Position 1
Spindle drive
(a) Delivery roller
Traveller Ring
Bobbin Position 2 Position 1 (b)
Spindle drive
4.16 (a) Left and (b) right diagonal arrangements (Wang, 1999).
reducing hairiness. Besides, the lack of fibre control on the left-hand side of the triangle may lead to more fly generation from that side. As a result the hairiness is reduced.
© Woodhead Publishing Limited, 2010
Yarn hairiness and its reduction
137
Table 4.2 Average S3 values per 100 m length of yarn Spinning arrangement
Average S3 value
Conventional Right diagonal Left diagonal
2333 2084 2658
Source: Wang et al., 1999.
4.7
Conclusions
Yarn hairiness is a very complex characteristic as it is influenced by the fibre properties, process parameters and testing conditions. A lot of research work has been conducted to understand the mechanism of hair formation during the spinning and winding processes and to develop methods to counter such formation. Apart from influencing the efficiency of the weaving and knitting processes, hairiness also influences the tension and power consumption during ring spinning, which has long been ignored by spinning technologists. On the other hand, the production of absolutely hair-free yarns may have an adverse effect on fabric comfort and handle characteristics. Therefore, it is of paramount importance to have systems that are able to control and engineer the hairiness level in a spun yarn. In the last two decades, compact spinning technology has emerged as a very popular method for reducing yarn hairiness, but the cost of yarn production has also gone up significantly. Systems such as jet-ring and jet